1833 files changed, 0 insertions, 324720 deletions

diff --git a/ANDROID_3.4.5/include/linux/8250_pci.h b/ANDROID_3.4.5/include/linux/8250_pci.h
deleted file mode 100644
index b24ff086..00000000
--- a/ANDROID_3.4.5/include/linux/8250_pci.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * Definitions for PCI support.
- */
-#define FL_BASE_MASK		0x0007
-#define FL_BASE0		0x0000
-#define FL_BASE1		0x0001
-#define FL_BASE2		0x0002
-#define FL_BASE3		0x0003
-#define FL_BASE4		0x0004
-#define FL_GET_BASE(x)		(x & FL_BASE_MASK)
-
-/* Use successive BARs (PCI base address registers),
-   else use offset into some specified BAR */
-#define FL_BASE_BARS		0x0008
-
-/* do not assign an irq */
-#define FL_NOIRQ		0x0080
-
-/* Use the Base address register size to cap number of ports */
-#define FL_REGION_SZ_CAP	0x0100
-
-struct pciserial_board {
-	unsigned int flags;
-	unsigned int num_ports;
-	unsigned int base_baud;
-	unsigned int uart_offset;
-	unsigned int reg_shift;
-	unsigned int first_offset;
-};
-
-struct serial_private;
-
-struct serial_private *
-pciserial_init_ports(struct pci_dev *dev, const struct pciserial_board *board);
-void pciserial_remove_ports(struct serial_private *priv);
-void pciserial_suspend_ports(struct serial_private *priv);
-void pciserial_resume_ports(struct serial_private *priv);
diff --git a/ANDROID_3.4.5/include/linux/Kbuild b/ANDROID_3.4.5/include/linux/Kbuild
deleted file mode 100644
index fb53cda1..00000000
--- a/ANDROID_3.4.5/include/linux/Kbuild
+++ /dev/null
@@ -1,412 +0,0 @@
-header-y += byteorder/
-header-y += can/
-header-y += caif/
-header-y += dvb/
-header-y += hdlc/
-header-y += hsi/
-header-y += isdn/
-header-y += mmc/
-header-y += nfsd/
-header-y += raid/
-header-y += spi/
-header-y += sunrpc/
-header-y += tc_act/
-header-y += tc_ematch/
-header-y += netfilter/
-header-y += netfilter_arp/
-header-y += netfilter_bridge/
-header-y += netfilter_ipv4/
-header-y += netfilter_ipv6/
-header-y += usb/
-header-y += wimax/
-
-objhdr-y += version.h
-
-ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/include/asm/a.out.h \
-		  $(srctree)/include/asm-$(SRCARCH)/a.out.h \
-		  $(INSTALL_HDR_PATH)/include/asm-*/a.out.h),)
-header-y += a.out.h
-endif
-ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/include/asm/kvm.h \
-		  $(srctree)/include/asm-$(SRCARCH)/kvm.h \
-		  $(INSTALL_HDR_PATH)/include/asm-*/kvm.h),)
-header-y += kvm.h
-endif
-ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/include/asm/kvm_para.h \
-		  $(srctree)/include/asm-$(SRCARCH)/kvm_para.h \
-		  $(INSTALL_HDR_PATH)/include/asm-*/kvm_para.h),)
-header-y += kvm_para.h
-endif
-
-header-y += acct.h
-header-y += adb.h
-header-y += adfs_fs.h
-header-y += affs_hardblocks.h
-header-y += agpgart.h
-header-y += aio_abi.h
-header-y += apm_bios.h
-header-y += arcfb.h
-header-y += atalk.h
-header-y += atm.h
-header-y += atm_eni.h
-header-y += atm_he.h
-header-y += atm_idt77105.h
-header-y += atm_nicstar.h
-header-y += atm_tcp.h
-header-y += atm_zatm.h
-header-y += atmapi.h
-header-y += atmarp.h
-header-y += atmbr2684.h
-header-y += atmclip.h
-header-y += atmdev.h
-header-y += atmioc.h
-header-y += atmlec.h
-header-y += atmmpc.h
-header-y += atmppp.h
-header-y += atmsap.h
-header-y += atmsvc.h
-header-y += audit.h
-header-y += auto_fs.h
-header-y += auto_fs4.h
-header-y += auxvec.h
-header-y += ax25.h
-header-y += b1lli.h
-header-y += baycom.h
-header-y += bfs_fs.h
-header-y += binfmts.h
-header-y += blk_types.h
-header-y += blkpg.h
-header-y += blktrace_api.h
-header-y += bpqether.h
-header-y += bsg.h
-header-y += can.h
-header-y += capability.h
-header-y += capi.h
-header-y += cciss_defs.h
-header-y += cciss_ioctl.h
-header-y += cdk.h
-header-y += cdrom.h
-header-y += cgroupstats.h
-header-y += chio.h
-header-y += cm4000_cs.h
-header-y += cn_proc.h
-header-y += coda.h
-header-y += coda_psdev.h
-header-y += coff.h
-header-y += comstats.h
-header-y += connector.h
-header-y += const.h
-header-y += cramfs_fs.h
-header-y += cuda.h
-header-y += cyclades.h
-header-y += cycx_cfm.h
-header-y += dcbnl.h
-header-y += dccp.h
-header-y += dlm.h
-header-y += dlm_device.h
-header-y += dlm_netlink.h
-header-y += dlm_plock.h
-header-y += dlmconstants.h
-header-y += dm-ioctl.h
-header-y += dm-log-userspace.h
-header-y += dn.h
-header-y += dqblk_xfs.h
-header-y += edd.h
-header-y += efs_fs_sb.h
-header-y += elf-em.h
-header-y += elf-fdpic.h
-header-y += elf.h
-header-y += elfcore.h
-header-y += errno.h
-header-y += errqueue.h
-header-y += ethtool.h
-header-y += eventpoll.h
-header-y += fadvise.h
-header-y += falloc.h
-header-y += fanotify.h
-header-y += fb.h
-header-y += fcntl.h
-header-y += fd.h
-header-y += fdreg.h
-header-y += fib_rules.h
-header-y += fiemap.h
-header-y += filter.h
-header-y += firewire-cdev.h
-header-y += firewire-constants.h
-header-y += flat.h
-header-y += fs.h
-header-y += fsl_hypervisor.h
-header-y += fuse.h
-header-y += futex.h
-header-y += gameport.h
-header-y += gen_stats.h
-header-y += generic_serial.h
-header-y += genetlink.h
-header-y += gfs2_ondisk.h
-header-y += gigaset_dev.h
-header-y += hdlc.h
-header-y += hdlcdrv.h
-header-y += hdreg.h
-header-y += hid.h
-header-y += hiddev.h
-header-y += hidraw.h
-header-y += hpet.h
-header-y += hysdn_if.h
-header-y += i2c-dev.h
-header-y += i2c.h
-header-y += i2o-dev.h
-header-y += i8k.h
-header-y += icmp.h
-header-y += icmpv6.h
-header-y += if.h
-header-y += if_addr.h
-header-y += if_addrlabel.h
-header-y += if_alg.h
-header-y += if_arcnet.h
-header-y += if_arp.h
-header-y += if_bonding.h
-header-y += if_bridge.h
-header-y += if_cablemodem.h
-header-y += if_ec.h
-header-y += if_eql.h
-header-y += if_ether.h
-header-y += if_fc.h
-header-y += if_fddi.h
-header-y += if_frad.h
-header-y += if_hippi.h
-header-y += if_infiniband.h
-header-y += if_link.h
-header-y += if_ltalk.h
-header-y += if_packet.h
-header-y += if_phonet.h
-header-y += if_plip.h
-header-y += if_ppp.h
-header-y += if_pppol2tp.h
-header-y += if_pppox.h
-header-y += if_pppolac.h
-header-y += if_pppopns.h
-header-y += if_slip.h
-header-y += if_strip.h
-header-y += if_team.h
-header-y += if_tr.h
-header-y += if_tun.h
-header-y += if_tunnel.h
-header-y += if_vlan.h
-header-y += if_x25.h
-header-y += igmp.h
-header-y += in.h
-header-y += in6.h
-header-y += in_route.h
-header-y += sock_diag.h
-header-y += inet_diag.h
-header-y += unix_diag.h
-header-y += inotify.h
-header-y += input.h
-header-y += ioctl.h
-header-y += ip.h
-header-y += ip6_tunnel.h
-header-y += ip_vs.h
-header-y += ipc.h
-header-y += ipmi.h
-header-y += ipmi_msgdefs.h
-header-y += ipsec.h
-header-y += ipv6.h
-header-y += ipv6_route.h
-header-y += ipx.h
-header-y += irda.h
-header-y += irqnr.h
-header-y += isdn.h
-header-y += isdn_divertif.h
-header-y += isdn_ppp.h
-header-y += isdnif.h
-header-y += iso_fs.h
-header-y += ivtv.h
-header-y += ivtvfb.h
-header-y += ixjuser.h
-header-y += jffs2.h
-header-y += joystick.h
-header-y += kd.h
-header-y += kdev_t.h
-header-y += kernel.h
-header-y += kernelcapi.h
-header-y += kernel-page-flags.h
-header-y += keyboard.h
-header-y += keyctl.h
-header-y += l2tp.h
-header-y += limits.h
-header-y += llc.h
-header-y += loop.h
-header-y += lp.h
-header-y += magic.h
-header-y += major.h
-header-y += map_to_7segment.h
-header-y += matroxfb.h
-header-y += mdio.h
-header-y += media.h
-header-y += mempolicy.h
-header-y += meye.h
-header-y += mii.h
-header-y += minix_fs.h
-header-y += mman.h
-header-y += mmtimer.h
-header-y += mqueue.h
-header-y += mroute.h
-header-y += mroute6.h
-header-y += msdos_fs.h
-header-y += msg.h
-header-y += mtio.h
-header-y += n_r3964.h
-header-y += nbd.h
-header-y += ncp.h
-header-y += ncp_fs.h
-header-y += ncp_mount.h
-header-y += ncp_no.h
-header-y += neighbour.h
-header-y += net.h
-header-y += net_dropmon.h
-header-y += net_tstamp.h
-header-y += netdevice.h
-header-y += netfilter.h
-header-y += netfilter_arp.h
-header-y += netfilter_bridge.h
-header-y += netfilter_decnet.h
-header-y += netfilter_ipv4.h
-header-y += netfilter_ipv6.h
-header-y += netlink.h
-header-y += netrom.h
-header-y += nfs.h
-header-y += nfs2.h
-header-y += nfs3.h
-header-y += nfs4.h
-header-y += nfs4_mount.h
-header-y += nfs_fs.h
-header-y += nfs_idmap.h
-header-y += nfs_mount.h
-header-y += nfsacl.h
-header-y += nl80211.h
-header-y += nubus.h
-header-y += nvram.h
-header-y += omap3isp.h
-header-y += omapfb.h
-header-y += oom.h
-header-y += param.h
-header-y += parport.h
-header-y += patchkey.h
-header-y += pci.h
-header-y += pci_regs.h
-header-y += perf_event.h
-header-y += personality.h
-header-y += pfkeyv2.h
-header-y += pg.h
-header-y += phantom.h
-header-y += phonet.h
-header-y += pkt_cls.h
-header-y += pkt_sched.h
-header-y += pktcdvd.h
-header-y += pmu.h
-header-y += poll.h
-header-y += posix_types.h
-header-y += ppdev.h
-header-y += ppp-comp.h
-header-y += ppp-ioctl.h
-header-y += ppp_defs.h
-header-y += pps.h
-header-y += prctl.h
-header-y += ptp_clock.h
-header-y += ptrace.h
-header-y += qnx4_fs.h
-header-y += qnxtypes.h
-header-y += quota.h
-header-y += radeonfb.h
-header-y += random.h
-header-y += raw.h
-header-y += rds.h
-header-y += reboot.h
-header-y += reiserfs_fs.h
-header-y += reiserfs_xattr.h
-header-y += resource.h
-header-y += rfkill.h
-header-y += romfs_fs.h
-header-y += rose.h
-header-y += route.h
-header-y += rtc.h
-header-y += rtnetlink.h
-header-y += scc.h
-header-y += sched.h
-header-y += screen_info.h
-header-y += sdla.h
-header-y += securebits.h
-header-y += selinux_netlink.h
-header-y += sem.h
-header-y += serial.h
-header-y += serial_core.h
-header-y += serial_reg.h
-header-y += serio.h
-header-y += shm.h
-header-y += signal.h
-header-y += signalfd.h
-header-y += snmp.h
-header-y += socket.h
-header-y += sockios.h
-header-y += som.h
-header-y += sonet.h
-header-y += sonypi.h
-header-y += sound.h
-header-y += soundcard.h
-header-y += stat.h
-header-y += stddef.h
-header-y += string.h
-header-y += suspend_ioctls.h
-header-y += swab.h
-header-y += synclink.h
-header-y += sysctl.h
-header-y += sysinfo.h
-header-y += taskstats.h
-header-y += tcp.h
-header-y += telephony.h
-header-y += termios.h
-header-y += time.h
-header-y += times.h
-header-y += timex.h
-header-y += tiocl.h
-header-y += tipc.h
-header-y += tipc_config.h
-header-y += toshiba.h
-header-y += tty.h
-header-y += types.h
-header-y += udf_fs_i.h
-header-y += udp.h
-header-y += uhid.h
-header-y += uinput.h
-header-y += uio.h
-header-y += ultrasound.h
-header-y += un.h
-header-y += unistd.h
-header-y += usbdevice_fs.h
-header-y += utime.h
-header-y += utsname.h
-header-y += uvcvideo.h
-header-y += v4l2-mediabus.h
-header-y += v4l2-subdev.h
-header-y += veth.h
-header-y += vhost.h
-header-y += videodev2.h
-header-y += virtio_9p.h
-header-y += virtio_balloon.h
-header-y += virtio_blk.h
-header-y += virtio_config.h
-header-y += virtio_console.h
-header-y += virtio_ids.h
-header-y += virtio_net.h
-header-y += virtio_pci.h
-header-y += virtio_ring.h
-header-y += virtio_rng.h
-header-y += vt.h
-header-y += wait.h
-header-y += wanrouter.h
-header-y += watchdog.h
-header-y += wimax.h
-header-y += wireless.h
-header-y += x25.h
-header-y += xattr.h
-header-y += xfrm.h
diff --git a/ANDROID_3.4.5/include/linux/a.out.h b/ANDROID_3.4.5/include/linux/a.out.h
deleted file mode 100644
index e86dfca4..00000000
--- a/ANDROID_3.4.5/include/linux/a.out.h
+++ /dev/null
@@ -1,278 +0,0 @@
-#ifndef __A_OUT_GNU_H__
-#define __A_OUT_GNU_H__
-
-#define __GNU_EXEC_MACROS__
-
-#ifndef __STRUCT_EXEC_OVERRIDE__
-
-#include <asm/a.out.h>
-
-#endif /* __STRUCT_EXEC_OVERRIDE__ */
-
-#ifndef __ASSEMBLY__
-
-/* these go in the N_MACHTYPE field */
-enum machine_type {
-#if defined (M_OLDSUN2)
-  M__OLDSUN2 = M_OLDSUN2,
-#else
-  M_OLDSUN2 = 0,
-#endif
-#if defined (M_68010)
-  M__68010 = M_68010,
-#else
-  M_68010 = 1,
-#endif
-#if defined (M_68020)
-  M__68020 = M_68020,
-#else
-  M_68020 = 2,
-#endif
-#if defined (M_SPARC)
-  M__SPARC = M_SPARC,
-#else
-  M_SPARC = 3,
-#endif
-  /* skip a bunch so we don't run into any of sun's numbers */
-  M_386 = 100,
-  M_MIPS1 = 151,	/* MIPS R3000/R3000 binary */
-  M_MIPS2 = 152		/* MIPS R6000/R4000 binary */
-};
-
-#if !defined (N_MAGIC)
-#define N_MAGIC(exec) ((exec).a_info & 0xffff)
-#endif
-#define N_MACHTYPE(exec) ((enum machine_type)(((exec).a_info >> 16) & 0xff))
-#define N_FLAGS(exec) (((exec).a_info >> 24) & 0xff)
-#define N_SET_INFO(exec, magic, type, flags) \
-	((exec).a_info = ((magic) & 0xffff) \
-	 | (((int)(type) & 0xff) << 16) \
-	 | (((flags) & 0xff) << 24))
-#define N_SET_MAGIC(exec, magic) \
-	((exec).a_info = (((exec).a_info & 0xffff0000) | ((magic) & 0xffff)))
-
-#define N_SET_MACHTYPE(exec, machtype) \
-	((exec).a_info = \
-	 ((exec).a_info&0xff00ffff) | ((((int)(machtype))&0xff) << 16))
-
-#define N_SET_FLAGS(exec, flags) \
-	((exec).a_info = \
-	 ((exec).a_info&0x00ffffff) | (((flags) & 0xff) << 24))
-
-/* Code indicating object file or impure executable.  */
-#define OMAGIC 0407
-/* Code indicating pure executable.  */
-#define NMAGIC 0410
-/* Code indicating demand-paged executable.  */
-#define ZMAGIC 0413
-/* This indicates a demand-paged executable with the header in the text. 
-   The first page is unmapped to help trap NULL pointer references */
-#define QMAGIC 0314
-
-/* Code indicating core file.  */
-#define CMAGIC 0421
-
-#if !defined (N_BADMAG)
-#define N_BADMAG(x)	  (N_MAGIC(x) != OMAGIC		\
-			&& N_MAGIC(x) != NMAGIC		\
-  			&& N_MAGIC(x) != ZMAGIC \
-		        && N_MAGIC(x) != QMAGIC)
-#endif
-
-#define _N_HDROFF(x) (1024 - sizeof (struct exec))
-
-#if !defined (N_TXTOFF)
-#define N_TXTOFF(x) \
- (N_MAGIC(x) == ZMAGIC ? _N_HDROFF((x)) + sizeof (struct exec) : \
-  (N_MAGIC(x) == QMAGIC ? 0 : sizeof (struct exec)))
-#endif
-
-#if !defined (N_DATOFF)
-#define N_DATOFF(x) (N_TXTOFF(x) + (x).a_text)
-#endif
-
-#if !defined (N_TRELOFF)
-#define N_TRELOFF(x) (N_DATOFF(x) + (x).a_data)
-#endif
-
-#if !defined (N_DRELOFF)
-#define N_DRELOFF(x) (N_TRELOFF(x) + N_TRSIZE(x))
-#endif
-
-#if !defined (N_SYMOFF)
-#define N_SYMOFF(x) (N_DRELOFF(x) + N_DRSIZE(x))
-#endif
-
-#if !defined (N_STROFF)
-#define N_STROFF(x) (N_SYMOFF(x) + N_SYMSIZE(x))
-#endif
-
-/* Address of text segment in memory after it is loaded.  */
-#if !defined (N_TXTADDR)
-#define N_TXTADDR(x) (N_MAGIC(x) == QMAGIC ? PAGE_SIZE : 0)
-#endif
-
-/* Address of data segment in memory after it is loaded.
-   Note that it is up to you to define SEGMENT_SIZE
-   on machines not listed here.  */
-#if defined(vax) || defined(hp300) || defined(pyr)
-#define SEGMENT_SIZE page_size
-#endif
-#ifdef	sony
-#define	SEGMENT_SIZE	0x2000
-#endif	/* Sony.  */
-#ifdef is68k
-#define SEGMENT_SIZE 0x20000
-#endif
-#if defined(m68k) && defined(PORTAR)
-#define PAGE_SIZE 0x400
-#define SEGMENT_SIZE PAGE_SIZE
-#endif
-
-#ifdef linux
-#ifdef __KERNEL__
-#include <asm/page.h>
-#else
-#include <unistd.h>
-#endif
-#if defined(__i386__) || defined(__mc68000__)
-#define SEGMENT_SIZE	1024
-#else
-#ifndef SEGMENT_SIZE
-#ifdef __KERNEL__
-#define SEGMENT_SIZE	PAGE_SIZE
-#else
-#define SEGMENT_SIZE   getpagesize()
-#endif
-#endif
-#endif
-#endif
-
-#define _N_SEGMENT_ROUND(x) ALIGN(x, SEGMENT_SIZE)
-
-#define _N_TXTENDADDR(x) (N_TXTADDR(x)+(x).a_text)
-
-#ifndef N_DATADDR
-#define N_DATADDR(x) \
-    (N_MAGIC(x)==OMAGIC? (_N_TXTENDADDR(x)) \
-     : (_N_SEGMENT_ROUND (_N_TXTENDADDR(x))))
-#endif
-
-/* Address of bss segment in memory after it is loaded.  */
-#if !defined (N_BSSADDR)
-#define N_BSSADDR(x) (N_DATADDR(x) + (x).a_data)
-#endif
-
-#if !defined (N_NLIST_DECLARED)
-struct nlist {
-  union {
-    char *n_name;
-    struct nlist *n_next;
-    long n_strx;
-  } n_un;
-  unsigned char n_type;
-  char n_other;
-  short n_desc;
-  unsigned long n_value;
-};
-#endif /* no N_NLIST_DECLARED.  */
-
-#if !defined (N_UNDF)
-#define N_UNDF 0
-#endif
-#if !defined (N_ABS)
-#define N_ABS 2
-#endif
-#if !defined (N_TEXT)
-#define N_TEXT 4
-#endif
-#if !defined (N_DATA)
-#define N_DATA 6
-#endif
-#if !defined (N_BSS)
-#define N_BSS 8
-#endif
-#if !defined (N_FN)
-#define N_FN 15
-#endif
-
-#if !defined (N_EXT)
-#define N_EXT 1
-#endif
-#if !defined (N_TYPE)
-#define N_TYPE 036
-#endif
-#if !defined (N_STAB)
-#define N_STAB 0340
-#endif
-
-/* The following type indicates the definition of a symbol as being
-   an indirect reference to another symbol.  The other symbol
-   appears as an undefined reference, immediately following this symbol.
-
-   Indirection is asymmetrical.  The other symbol's value will be used
-   to satisfy requests for the indirect symbol, but not vice versa.
-   If the other symbol does not have a definition, libraries will
-   be searched to find a definition.  */
-#define N_INDR 0xa
-
-/* The following symbols refer to set elements.
-   All the N_SET[ATDB] symbols with the same name form one set.
-   Space is allocated for the set in the text section, and each set
-   element's value is stored into one word of the space.
-   The first word of the space is the length of the set (number of elements).
-
-   The address of the set is made into an N_SETV symbol
-   whose name is the same as the name of the set.
-   This symbol acts like a N_DATA global symbol
-   in that it can satisfy undefined external references.  */
-
-/* These appear as input to LD, in a .o file.  */
-#define	N_SETA	0x14		/* Absolute set element symbol */
-#define	N_SETT	0x16		/* Text set element symbol */
-#define	N_SETD	0x18		/* Data set element symbol */
-#define	N_SETB	0x1A		/* Bss set element symbol */
-
-/* This is output from LD.  */
-#define N_SETV	0x1C		/* Pointer to set vector in data area.  */
-
-#if !defined (N_RELOCATION_INFO_DECLARED)
-/* This structure describes a single relocation to be performed.
-   The text-relocation section of the file is a vector of these structures,
-   all of which apply to the text section.
-   Likewise, the data-relocation section applies to the data section.  */
-
-struct relocation_info
-{
-  /* Address (within segment) to be relocated.  */
-  int r_address;
-  /* The meaning of r_symbolnum depends on r_extern.  */
-  unsigned int r_symbolnum:24;
-  /* Nonzero means value is a pc-relative offset
-     and it should be relocated for changes in its own address
-     as well as for changes in the symbol or section specified.  */
-  unsigned int r_pcrel:1;
-  /* Length (as exponent of 2) of the field to be relocated.
-     Thus, a value of 2 indicates 1<<2 bytes.  */
-  unsigned int r_length:2;
-  /* 1 => relocate with value of symbol.
-          r_symbolnum is the index of the symbol
-	  in file's the symbol table.
-     0 => relocate with the address of a segment.
-          r_symbolnum is N_TEXT, N_DATA, N_BSS or N_ABS
-	  (the N_EXT bit may be set also, but signifies nothing).  */
-  unsigned int r_extern:1;
-  /* Four bits that aren't used, but when writing an object file
-     it is desirable to clear them.  */
-#ifdef NS32K
-  unsigned r_bsr:1;
-  unsigned r_disp:1;
-  unsigned r_pad:2;
-#else
-  unsigned int r_pad:4;
-#endif
-};
-#endif /* no N_RELOCATION_INFO_DECLARED.  */
-
-#endif /*__ASSEMBLY__ */
-#endif /* __A_OUT_GNU_H__ */
diff --git a/ANDROID_3.4.5/include/linux/ac97_codec.h b/ANDROID_3.4.5/include/linux/ac97_codec.h
deleted file mode 100644
index 0260c3e7..00000000
--- a/ANDROID_3.4.5/include/linux/ac97_codec.h
+++ /dev/null
@@ -1,362 +0,0 @@
-#ifndef _AC97_CODEC_H_
-#define _AC97_CODEC_H_
-
-#include <linux/types.h>
-#include <linux/soundcard.h>
-
-/* AC97 1.0 */
-#define  AC97_RESET               0x0000      //
-#define  AC97_MASTER_VOL_STEREO   0x0002      // Line Out
-#define  AC97_HEADPHONE_VOL       0x0004      // 
-#define  AC97_MASTER_VOL_MONO     0x0006      // TAD Output
-#define  AC97_MASTER_TONE         0x0008      //
-#define  AC97_PCBEEP_VOL          0x000a      // none
-#define  AC97_PHONE_VOL           0x000c      // TAD Input (mono)
-#define  AC97_MIC_VOL             0x000e      // MIC Input (mono)
-#define  AC97_LINEIN_VOL          0x0010      // Line Input (stereo)
-#define  AC97_CD_VOL              0x0012      // CD Input (stereo)
-#define  AC97_VIDEO_VOL           0x0014      // none
-#define  AC97_AUX_VOL             0x0016      // Aux Input (stereo)
-#define  AC97_PCMOUT_VOL          0x0018      // Wave Output (stereo)
-#define  AC97_RECORD_SELECT       0x001a      //
-#define  AC97_RECORD_GAIN         0x001c
-#define  AC97_RECORD_GAIN_MIC     0x001e
-#define  AC97_GENERAL_PURPOSE     0x0020
-#define  AC97_3D_CONTROL          0x0022
-#define  AC97_MODEM_RATE          0x0024
-#define  AC97_POWER_CONTROL       0x0026
-
-/* AC'97 2.0 */
-#define AC97_EXTENDED_ID          0x0028       /* Extended Audio ID */
-#define AC97_EXTENDED_STATUS      0x002A       /* Extended Audio Status */
-#define AC97_PCM_FRONT_DAC_RATE   0x002C       /* PCM Front DAC Rate */
-#define AC97_PCM_SURR_DAC_RATE    0x002E       /* PCM Surround DAC Rate */
-#define AC97_PCM_LFE_DAC_RATE     0x0030       /* PCM LFE DAC Rate */
-#define AC97_PCM_LR_ADC_RATE      0x0032       /* PCM LR ADC Rate */
-#define AC97_PCM_MIC_ADC_RATE     0x0034       /* PCM MIC ADC Rate */
-#define AC97_CENTER_LFE_MASTER    0x0036       /* Center + LFE Master Volume */
-#define AC97_SURROUND_MASTER      0x0038       /* Surround (Rear) Master Volume */
-#define AC97_RESERVED_3A          0x003A       /* Reserved in AC '97 < 2.2 */
-
-/* AC'97 2.2 */
-#define AC97_SPDIF_CONTROL        0x003A       /* S/PDIF Control */
-
-/* range 0x3c-0x58 - MODEM */
-#define AC97_EXTENDED_MODEM_ID    0x003C
-#define AC97_EXTEND_MODEM_STAT    0x003E
-#define AC97_LINE1_RATE           0x0040
-#define AC97_LINE2_RATE           0x0042
-#define AC97_HANDSET_RATE         0x0044
-#define AC97_LINE1_LEVEL          0x0046
-#define AC97_LINE2_LEVEL          0x0048
-#define AC97_HANDSET_LEVEL        0x004A
-#define AC97_GPIO_CONFIG          0x004C
-#define AC97_GPIO_POLARITY        0x004E
-#define AC97_GPIO_STICKY          0x0050
-#define AC97_GPIO_WAKE_UP         0x0052
-#define AC97_GPIO_STATUS          0x0054
-#define AC97_MISC_MODEM_STAT      0x0056
-#define AC97_RESERVED_58          0x0058
-
-/* registers 0x005a - 0x007a are vendor reserved */
-
-#define AC97_VENDOR_ID1           0x007c
-#define AC97_VENDOR_ID2           0x007e
-
-/* volume control bit defines */
-#define AC97_MUTE                 0x8000
-#define AC97_MICBOOST             0x0040
-#define AC97_LEFTVOL              0x3f00
-#define AC97_RIGHTVOL             0x003f
-
-/* record mux defines */
-#define AC97_RECMUX_MIC           0x0000
-#define AC97_RECMUX_CD            0x0101
-#define AC97_RECMUX_VIDEO         0x0202
-#define AC97_RECMUX_AUX           0x0303
-#define AC97_RECMUX_LINE          0x0404
-#define AC97_RECMUX_STEREO_MIX    0x0505
-#define AC97_RECMUX_MONO_MIX      0x0606
-#define AC97_RECMUX_PHONE         0x0707
-
-/* general purpose register bit defines */
-#define AC97_GP_LPBK              0x0080       /* Loopback mode */
-#define AC97_GP_MS                0x0100       /* Mic Select 0=Mic1, 1=Mic2 */
-#define AC97_GP_MIX               0x0200       /* Mono output select 0=Mix, 1=Mic */
-#define AC97_GP_RLBK              0x0400       /* Remote Loopback - Modem line codec */
-#define AC97_GP_LLBK              0x0800       /* Local Loopback - Modem Line codec */
-#define AC97_GP_LD                0x1000       /* Loudness 1=on */
-#define AC97_GP_3D                0x2000       /* 3D Enhancement 1=on */
-#define AC97_GP_ST                0x4000       /* Stereo Enhancement 1=on */
-#define AC97_GP_POP               0x8000       /* Pcm Out Path, 0=pre 3D, 1=post 3D */
-
-/* extended audio status and control bit defines */
-#define AC97_EA_VRA               0x0001       /* Variable bit rate enable bit */
-#define AC97_EA_DRA               0x0002       /* Double-rate audio enable bit */
-#define AC97_EA_SPDIF             0x0004       /* S/PDIF Enable bit */
-#define AC97_EA_VRM               0x0008       /* Variable bit rate for MIC enable bit */
-#define AC97_EA_CDAC              0x0040       /* PCM Center DAC is ready (Read only) */
-#define AC97_EA_SDAC              0x0040       /* PCM Surround DACs are ready (Read only) */
-#define AC97_EA_LDAC              0x0080       /* PCM LFE DAC is ready (Read only) */
-#define AC97_EA_MDAC              0x0100       /* MIC ADC is ready (Read only) */
-#define AC97_EA_SPCV              0x0400       /* S/PDIF configuration valid (Read only) */
-#define AC97_EA_PRI               0x0800       /* Turns the PCM Center DAC off */
-#define AC97_EA_PRJ               0x1000       /* Turns the PCM Surround DACs off */
-#define AC97_EA_PRK               0x2000       /* Turns the PCM LFE DAC off */
-#define AC97_EA_PRL               0x4000       /* Turns the MIC ADC off */
-#define AC97_EA_SLOT_MASK         0xffcf       /* Mask for slot assignment bits */
-#define AC97_EA_SPSA_3_4          0x0000       /* Slot assigned to 3 & 4 */
-#define AC97_EA_SPSA_7_8          0x0010       /* Slot assigned to 7 & 8 */
-#define AC97_EA_SPSA_6_9          0x0020       /* Slot assigned to 6 & 9 */
-#define AC97_EA_SPSA_10_11        0x0030       /* Slot assigned to 10 & 11 */
-
-/* S/PDIF control bit defines */
-#define AC97_SC_PRO               0x0001       /* Professional status */
-#define AC97_SC_NAUDIO            0x0002       /* Non audio stream */
-#define AC97_SC_COPY              0x0004       /* Copyright status */
-#define AC97_SC_PRE               0x0008       /* Preemphasis status */
-#define AC97_SC_CC_MASK           0x07f0       /* Category Code mask */
-#define AC97_SC_L                 0x0800       /* Generation Level status */
-#define AC97_SC_SPSR_MASK         0xcfff       /* S/PDIF Sample Rate bits */
-#define AC97_SC_SPSR_44K          0x0000       /* Use 44.1kHz Sample rate */
-#define AC97_SC_SPSR_48K          0x2000       /* Use 48kHz Sample rate */
-#define AC97_SC_SPSR_32K          0x3000       /* Use 32kHz Sample rate */
-#define AC97_SC_DRS               0x4000       /* Double Rate S/PDIF */
-#define AC97_SC_V                 0x8000       /* Validity status */
-
-/* powerdown control and status bit defines */
-
-/* status */
-#define AC97_PWR_MDM              0x0010       /* Modem section ready */
-#define AC97_PWR_REF              0x0008       /* Vref nominal */
-#define AC97_PWR_ANL              0x0004       /* Analog section ready */
-#define AC97_PWR_DAC              0x0002       /* DAC section ready */
-#define AC97_PWR_ADC              0x0001       /* ADC section ready */
-
-/* control */
-#define AC97_PWR_PR0              0x0100       /* ADC and Mux powerdown */
-#define AC97_PWR_PR1              0x0200       /* DAC powerdown */
-#define AC97_PWR_PR2              0x0400       /* Output mixer powerdown (Vref on) */
-#define AC97_PWR_PR3              0x0800       /* Output mixer powerdown (Vref off) */
-#define AC97_PWR_PR4              0x1000       /* AC-link powerdown */
-#define AC97_PWR_PR5              0x2000       /* Internal Clk disable */
-#define AC97_PWR_PR6              0x4000       /* HP amp powerdown */
-#define AC97_PWR_PR7              0x8000       /* Modem off - if supported */
-
-/* extended audio ID register bit defines */
-#define AC97_EXTID_VRA            0x0001
-#define AC97_EXTID_DRA            0x0002
-#define AC97_EXTID_SPDIF          0x0004
-#define AC97_EXTID_VRM            0x0008
-#define AC97_EXTID_DSA0           0x0010
-#define AC97_EXTID_DSA1           0x0020
-#define AC97_EXTID_CDAC           0x0040
-#define AC97_EXTID_SDAC           0x0080
-#define AC97_EXTID_LDAC           0x0100
-#define AC97_EXTID_AMAP           0x0200
-#define AC97_EXTID_REV0           0x0400
-#define AC97_EXTID_REV1           0x0800
-#define AC97_EXTID_ID0            0x4000
-#define AC97_EXTID_ID1            0x8000
-
-/* extended status register bit defines */
-#define AC97_EXTSTAT_VRA          0x0001
-#define AC97_EXTSTAT_DRA          0x0002
-#define AC97_EXTSTAT_SPDIF        0x0004
-#define AC97_EXTSTAT_VRM          0x0008
-#define AC97_EXTSTAT_SPSA0        0x0010
-#define AC97_EXTSTAT_SPSA1        0x0020
-#define AC97_EXTSTAT_CDAC         0x0040
-#define AC97_EXTSTAT_SDAC         0x0080
-#define AC97_EXTSTAT_LDAC         0x0100
-#define AC97_EXTSTAT_MADC         0x0200
-#define AC97_EXTSTAT_SPCV         0x0400
-#define AC97_EXTSTAT_PRI          0x0800
-#define AC97_EXTSTAT_PRJ          0x1000
-#define AC97_EXTSTAT_PRK          0x2000
-#define AC97_EXTSTAT_PRL          0x4000
-
-/* extended audio ID register bit defines */
-#define AC97_EXTID_VRA            0x0001
-#define AC97_EXTID_DRA            0x0002
-#define AC97_EXTID_SPDIF          0x0004
-#define AC97_EXTID_VRM            0x0008
-#define AC97_EXTID_DSA0           0x0010
-#define AC97_EXTID_DSA1           0x0020
-#define AC97_EXTID_CDAC           0x0040
-#define AC97_EXTID_SDAC           0x0080
-#define AC97_EXTID_LDAC           0x0100
-#define AC97_EXTID_AMAP           0x0200
-#define AC97_EXTID_REV0           0x0400
-#define AC97_EXTID_REV1           0x0800
-#define AC97_EXTID_ID0            0x4000
-#define AC97_EXTID_ID1            0x8000
-
-/* extended status register bit defines */
-#define AC97_EXTSTAT_VRA          0x0001
-#define AC97_EXTSTAT_DRA          0x0002
-#define AC97_EXTSTAT_SPDIF        0x0004
-#define AC97_EXTSTAT_VRM          0x0008
-#define AC97_EXTSTAT_SPSA0        0x0010
-#define AC97_EXTSTAT_SPSA1        0x0020
-#define AC97_EXTSTAT_CDAC         0x0040
-#define AC97_EXTSTAT_SDAC         0x0080
-#define AC97_EXTSTAT_LDAC         0x0100
-#define AC97_EXTSTAT_MADC         0x0200
-#define AC97_EXTSTAT_SPCV         0x0400
-#define AC97_EXTSTAT_PRI          0x0800
-#define AC97_EXTSTAT_PRJ          0x1000
-#define AC97_EXTSTAT_PRK          0x2000
-#define AC97_EXTSTAT_PRL          0x4000
-
-/* useful power states */
-#define AC97_PWR_D0               0x0000      /* everything on */
-#define AC97_PWR_D1              AC97_PWR_PR0|AC97_PWR_PR1|AC97_PWR_PR4
-#define AC97_PWR_D2              AC97_PWR_PR0|AC97_PWR_PR1|AC97_PWR_PR2|AC97_PWR_PR3|AC97_PWR_PR4
-#define AC97_PWR_D3              AC97_PWR_PR0|AC97_PWR_PR1|AC97_PWR_PR2|AC97_PWR_PR3|AC97_PWR_PR4
-#define AC97_PWR_ANLOFF          AC97_PWR_PR2|AC97_PWR_PR3  /* analog section off */
-
-/* Total number of defined registers.  */
-#define AC97_REG_CNT 64
-
-
-/* OSS interface to the ac97s.. */
-#define AC97_STEREO_MASK (SOUND_MASK_VOLUME|SOUND_MASK_PCM|\
-	SOUND_MASK_LINE|SOUND_MASK_CD|\
-	SOUND_MASK_ALTPCM|SOUND_MASK_IGAIN|\
-	SOUND_MASK_LINE1|SOUND_MASK_VIDEO)
-
-#define AC97_SUPPORTED_MASK (AC97_STEREO_MASK | \
-	SOUND_MASK_BASS|SOUND_MASK_TREBLE|\
-	SOUND_MASK_SPEAKER|SOUND_MASK_MIC|\
-	SOUND_MASK_PHONEIN|SOUND_MASK_PHONEOUT)
-
-#define AC97_RECORD_MASK (SOUND_MASK_MIC|\
-	SOUND_MASK_CD|SOUND_MASK_IGAIN|SOUND_MASK_VIDEO|\
-	SOUND_MASK_LINE1| SOUND_MASK_LINE|\
-	SOUND_MASK_PHONEIN)
-
-/* original check is not good enough in case FOO is greater than
- * SOUND_MIXER_NRDEVICES because the supported_mixers has exactly
- * SOUND_MIXER_NRDEVICES elements.
- * before matching the given mixer against the bitmask in supported_mixers we
- * check if mixer number exceeds maximum allowed size which is as mentioned
- * above SOUND_MIXER_NRDEVICES */
-#define supported_mixer(CODEC,FOO) ((FOO >= 0) && \
-                                    (FOO < SOUND_MIXER_NRDEVICES) && \
-                                    (CODEC)->supported_mixers & (1<<FOO) )
-
-struct ac97_codec {
-	/* Linked list of codecs */
-	struct list_head list;
-
-	/* AC97 controller connected with */
-	void *private_data;
-
-	char *name;
-	int id;
-	int dev_mixer; 
-	int type;
-	u32 model;
-
-	unsigned int modem:1;
-
-	struct ac97_ops *codec_ops;
-
-	/* controller specific lower leverl ac97 accessing routines.
-	   must be re-entrant safe */
-	u16  (*codec_read)  (struct ac97_codec *codec, u8 reg);
-	void (*codec_write) (struct ac97_codec *codec, u8 reg, u16 val);
-
-	/* Wait for codec-ready.  Ok to sleep here.  */
-	void  (*codec_wait)  (struct ac97_codec *codec);
-
-	/* callback used by helper drivers for interesting ac97 setups */
-	void  (*codec_unregister) (struct ac97_codec *codec);
-	
-	struct ac97_driver *driver;
-	void *driver_private;	/* Private data for the driver */
-	
-	spinlock_t lock;
-	
-	/* OSS mixer masks */
-	int modcnt;
-	int supported_mixers;
-	int stereo_mixers;
-	int record_sources;
-
-	/* Property flags */
-	int flags;
-
-	int bit_resolution;
-
-	/* OSS mixer interface */
-	int  (*read_mixer) (struct ac97_codec *codec, int oss_channel);
-	void (*write_mixer)(struct ac97_codec *codec, int oss_channel,
-			    unsigned int left, unsigned int right);
-	int  (*recmask_io) (struct ac97_codec *codec, int rw, int mask);
-	int  (*mixer_ioctl)(struct ac97_codec *codec, unsigned int cmd, unsigned long arg);
-
-	/* saved OSS mixer states */
-	unsigned int mixer_state[SOUND_MIXER_NRDEVICES];
-
-	/* Software Modem interface */
-	int  (*modem_ioctl)(struct ac97_codec *codec, unsigned int cmd, unsigned long arg);
-};
-
-/*
- *	Operation structures for each known AC97 chip
- */
- 
-struct ac97_ops
-{
-	/* Initialise */
-	int (*init)(struct ac97_codec *c);
-	/* Amplifier control */
-	int (*amplifier)(struct ac97_codec *codec, int on);
-	/* Digital mode control */
-	int (*digital)(struct ac97_codec *codec, int slots, int rate, int mode);
-#define AUDIO_DIGITAL		0x8000
-#define AUDIO_PRO		0x4000
-#define AUDIO_DRS		0x2000
-#define AUDIO_CCMASK		0x003F
-	
-#define AC97_DELUDED_MODEM	1	/* Audio codec reports its a modem */
-#define AC97_NO_PCM_VOLUME	2	/* Volume control is missing 	   */
-#define AC97_DEFAULT_POWER_OFF 4 /* Needs warm reset to power up */
-};
-
-extern int ac97_probe_codec(struct ac97_codec *);
-
-extern struct ac97_codec *ac97_alloc_codec(void);
-extern void ac97_release_codec(struct ac97_codec *codec);
-
-struct ac97_driver {
-	struct list_head list;
-	char *name;
-	u32 codec_id;
-	u32 codec_mask;
-	int (*probe) (struct ac97_codec *codec, struct ac97_driver *driver);
-	void (*remove) (struct ac97_codec *codec, struct ac97_driver *driver);
-};
-
-/* quirk types */
-enum {
-	AC97_TUNE_DEFAULT = -1, /* use default from quirk list (not valid in list) */
-	AC97_TUNE_NONE = 0,     /* nothing extra to do */
-	AC97_TUNE_HP_ONLY,      /* headphone (true line-out) control as master only */
-	AC97_TUNE_SWAP_HP,      /* swap headphone and master controls */
-	AC97_TUNE_SWAP_SURROUND, /* swap master and surround controls */
-	AC97_TUNE_AD_SHARING,   /* for AD1985, turn on OMS bit and use headphone */
-	AC97_TUNE_ALC_JACK,     /* for Realtek, enable JACK detection */
-};
-
-struct ac97_quirk {
-	unsigned short vendor;  /* PCI vendor id */
-	unsigned short device;  /* PCI device id */
-	unsigned short mask;    /* device id bit mask, 0 = accept all */
-	const char *name;       /* name shown as info */
-	int type;               /* quirk type above */
-};
-
-#endif /* _AC97_CODEC_H_ */
diff --git a/ANDROID_3.4.5/include/linux/acct.h b/ANDROID_3.4.5/include/linux/acct.h
deleted file mode 100644
index d537aa0e..00000000
--- a/ANDROID_3.4.5/include/linux/acct.h
+++ /dev/null
@@ -1,215 +0,0 @@
-/*
- *  BSD Process Accounting for Linux - Definitions
- *
- *  Author: Marco van Wieringen (mvw@planets.elm.net)
- *
- *  This header file contains the definitions needed to implement
- *  BSD-style process accounting. The kernel accounting code and all
- *  user-level programs that try to do something useful with the
- *  process accounting log must include this file.
- *
- *  Copyright (C) 1995 - 1997 Marco van Wieringen - ELM Consultancy B.V.
- *
- */
-
-#ifndef _LINUX_ACCT_H
-#define _LINUX_ACCT_H
-
-#include <linux/types.h>
-
-#include <asm/param.h>
-#include <asm/byteorder.h>
-
-/* 
- *  comp_t is a 16-bit "floating" point number with a 3-bit base 8
- *  exponent and a 13-bit fraction.
- *  comp2_t is 24-bit with 5-bit base 2 exponent and 20 bit fraction
- *  (leading 1 not stored).
- *  See linux/kernel/acct.c for the specific encoding systems used.
- */
-
-typedef __u16	comp_t;
-typedef __u32	comp2_t;
-
-/*
- *   accounting file record
- *
- *   This structure contains all of the information written out to the
- *   process accounting file whenever a process exits.
- */
-
-#define ACCT_COMM	16
-
-struct acct
-{
-	char		ac_flag;		/* Flags */
-	char		ac_version;		/* Always set to ACCT_VERSION */
-	/* for binary compatibility back until 2.0 */
-	__u16		ac_uid16;		/* LSB of Real User ID */
-	__u16		ac_gid16;		/* LSB of Real Group ID */
-	__u16		ac_tty;			/* Control Terminal */
-	__u32		ac_btime;		/* Process Creation Time */
-	comp_t		ac_utime;		/* User Time */
-	comp_t		ac_stime;		/* System Time */
-	comp_t		ac_etime;		/* Elapsed Time */
-	comp_t		ac_mem;			/* Average Memory Usage */
-	comp_t		ac_io;			/* Chars Transferred */
-	comp_t		ac_rw;			/* Blocks Read or Written */
-	comp_t		ac_minflt;		/* Minor Pagefaults */
-	comp_t		ac_majflt;		/* Major Pagefaults */
-	comp_t		ac_swaps;		/* Number of Swaps */
-/* m68k had no padding here. */
-#if !defined(CONFIG_M68K) || !defined(__KERNEL__)
-	__u16		ac_ahz;			/* AHZ */
-#endif
-	__u32		ac_exitcode;		/* Exitcode */
-	char		ac_comm[ACCT_COMM + 1];	/* Command Name */
-	__u8		ac_etime_hi;		/* Elapsed Time MSB */
-	__u16		ac_etime_lo;		/* Elapsed Time LSB */
-	__u32		ac_uid;			/* Real User ID */
-	__u32		ac_gid;			/* Real Group ID */
-};
-
-struct acct_v3
-{
-	char		ac_flag;		/* Flags */
-	char		ac_version;		/* Always set to ACCT_VERSION */
-	__u16		ac_tty;			/* Control Terminal */
-	__u32		ac_exitcode;		/* Exitcode */
-	__u32		ac_uid;			/* Real User ID */
-	__u32		ac_gid;			/* Real Group ID */
-	__u32		ac_pid;			/* Process ID */
-	__u32		ac_ppid;		/* Parent Process ID */
-	__u32		ac_btime;		/* Process Creation Time */
-#ifdef __KERNEL__
-	__u32		ac_etime;		/* Elapsed Time */
-#else
-	float		ac_etime;		/* Elapsed Time */
-#endif
-	comp_t		ac_utime;		/* User Time */
-	comp_t		ac_stime;		/* System Time */
-	comp_t		ac_mem;			/* Average Memory Usage */
-	comp_t		ac_io;			/* Chars Transferred */
-	comp_t		ac_rw;			/* Blocks Read or Written */
-	comp_t		ac_minflt;		/* Minor Pagefaults */
-	comp_t		ac_majflt;		/* Major Pagefaults */
-	comp_t		ac_swaps;		/* Number of Swaps */
-	char		ac_comm[ACCT_COMM];	/* Command Name */
-};
-
-/*
- *  accounting flags
- */
-				/* bit set when the process ... */
-#define AFORK		0x01	/* ... executed fork, but did not exec */
-#define ASU		0x02	/* ... used super-user privileges */
-#define ACOMPAT		0x04	/* ... used compatibility mode (VAX only not used) */
-#define ACORE		0x08	/* ... dumped core */
-#define AXSIG		0x10	/* ... was killed by a signal */
-
-#ifdef __BIG_ENDIAN
-#define ACCT_BYTEORDER	0x80	/* accounting file is big endian */
-#else
-#define ACCT_BYTEORDER	0x00	/* accounting file is little endian */
-#endif
-
-#ifdef __KERNEL__
-
-
-#ifdef CONFIG_BSD_PROCESS_ACCT
-struct vfsmount;
-struct super_block;
-struct pacct_struct;
-struct pid_namespace;
-extern int acct_parm[]; /* for sysctl */
-extern void acct_auto_close_mnt(struct vfsmount *m);
-extern void acct_auto_close(struct super_block *sb);
-extern void acct_collect(long exitcode, int group_dead);
-extern void acct_process(void);
-extern void acct_exit_ns(struct pid_namespace *);
-#else
-#define acct_auto_close_mnt(x)	do { } while (0)
-#define acct_auto_close(x)	do { } while (0)
-#define acct_collect(x,y)	do { } while (0)
-#define acct_process()		do { } while (0)
-#define acct_exit_ns(ns)	do { } while (0)
-#endif
-
-/*
- * ACCT_VERSION numbers as yet defined:
- * 0: old format (until 2.6.7) with 16 bit uid/gid
- * 1: extended variant (binary compatible on M68K)
- * 2: extended variant (binary compatible on everything except M68K)
- * 3: new binary incompatible format (64 bytes)
- * 4: new binary incompatible format (128 bytes)
- * 5: new binary incompatible format (128 bytes, second half)
- *
- */
-
-#undef ACCT_VERSION
-#undef AHZ
-
-#ifdef CONFIG_BSD_PROCESS_ACCT_V3
-#define ACCT_VERSION	3
-#define AHZ		100
-typedef struct acct_v3 acct_t;
-#else
-#ifdef CONFIG_M68K
-#define ACCT_VERSION	1
-#else
-#define ACCT_VERSION	2
-#endif
-#define AHZ		(USER_HZ)
-typedef struct acct acct_t;
-#endif
-
-#else
-#define ACCT_VERSION	2
-#define AHZ		(HZ)
-#endif	/* __KERNEL */
-
-#ifdef __KERNEL__
-#include <linux/jiffies.h>
-/*
- * Yet another set of HZ to *HZ helper functions.
- * See <linux/jiffies.h> for the original.
- */
-
-static inline u32 jiffies_to_AHZ(unsigned long x)
-{
-#if (TICK_NSEC % (NSEC_PER_SEC / AHZ)) == 0
-# if HZ < AHZ
-	return x * (AHZ / HZ);
-# else
-	return x / (HZ / AHZ);
-# endif
-#else
-        u64 tmp = (u64)x * TICK_NSEC;
-        do_div(tmp, (NSEC_PER_SEC / AHZ));
-        return (long)tmp;
-#endif
-}
-
-static inline u64 nsec_to_AHZ(u64 x)
-{
-#if (NSEC_PER_SEC % AHZ) == 0
-	do_div(x, (NSEC_PER_SEC / AHZ));
-#elif (AHZ % 512) == 0
-	x *= AHZ/512;
-	do_div(x, (NSEC_PER_SEC / 512));
-#else
-	/*
-         * max relative error 5.7e-8 (1.8s per year) for AHZ <= 1024,
-         * overflow after 64.99 years.
-         * exact for AHZ=60, 72, 90, 120, 144, 180, 300, 600, 900, ...
-         */
-	x *= 9;
-	do_div(x, (unsigned long)((9ull * NSEC_PER_SEC + (AHZ/2))
-	                          / AHZ));
-#endif
-	return x;
-}
-
-#endif  /* __KERNEL */
-
-#endif	/* _LINUX_ACCT_H */
diff --git a/ANDROID_3.4.5/include/linux/acpi.h b/ANDROID_3.4.5/include/linux/acpi.h
deleted file mode 100644
index f421dd84..00000000
--- a/ANDROID_3.4.5/include/linux/acpi.h
+++ /dev/null
@@ -1,385 +0,0 @@
-/*
- * acpi.h - ACPI Interface
- *
- * Copyright (C) 2001 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com>
- *
- * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- */
-
-#ifndef _LINUX_ACPI_H
-#define _LINUX_ACPI_H
-
-#include <linux/ioport.h>	/* for struct resource */
-
-#ifdef	CONFIG_ACPI
-
-#ifndef _LINUX
-#define _LINUX
-#endif
-
-#include <linux/list.h>
-#include <linux/mod_devicetable.h>
-
-#include <acpi/acpi.h>
-#include <acpi/acpi_bus.h>
-#include <acpi/acpi_drivers.h>
-#include <acpi/acpi_numa.h>
-#include <asm/acpi.h>
-
-enum acpi_irq_model_id {
-	ACPI_IRQ_MODEL_PIC = 0,
-	ACPI_IRQ_MODEL_IOAPIC,
-	ACPI_IRQ_MODEL_IOSAPIC,
-	ACPI_IRQ_MODEL_PLATFORM,
-	ACPI_IRQ_MODEL_COUNT
-};
-
-extern enum acpi_irq_model_id	acpi_irq_model;
-
-enum acpi_interrupt_id {
-	ACPI_INTERRUPT_PMI	= 1,
-	ACPI_INTERRUPT_INIT,
-	ACPI_INTERRUPT_CPEI,
-	ACPI_INTERRUPT_COUNT
-};
-
-#define	ACPI_SPACE_MEM		0
-
-enum acpi_address_range_id {
-	ACPI_ADDRESS_RANGE_MEMORY = 1,
-	ACPI_ADDRESS_RANGE_RESERVED = 2,
-	ACPI_ADDRESS_RANGE_ACPI = 3,
-	ACPI_ADDRESS_RANGE_NVS	= 4,
-	ACPI_ADDRESS_RANGE_COUNT
-};
-
-
-/* Table Handlers */
-
-typedef int (*acpi_table_handler) (struct acpi_table_header *table);
-
-typedef int (*acpi_table_entry_handler) (struct acpi_subtable_header *header, const unsigned long end);
-
-char * __acpi_map_table (unsigned long phys_addr, unsigned long size);
-void __acpi_unmap_table(char *map, unsigned long size);
-int early_acpi_boot_init(void);
-int acpi_boot_init (void);
-void acpi_boot_table_init (void);
-int acpi_mps_check (void);
-int acpi_numa_init (void);
-
-int acpi_table_init (void);
-int acpi_table_parse (char *id, acpi_table_handler handler);
-int __init acpi_table_parse_entries(char *id, unsigned long table_size,
-	int entry_id, acpi_table_entry_handler handler, unsigned int max_entries);
-int acpi_table_parse_madt (enum acpi_madt_type id, acpi_table_entry_handler handler, unsigned int max_entries);
-int acpi_parse_mcfg (struct acpi_table_header *header);
-void acpi_table_print_madt_entry (struct acpi_subtable_header *madt);
-
-/* the following four functions are architecture-dependent */
-void acpi_numa_slit_init (struct acpi_table_slit *slit);
-void acpi_numa_processor_affinity_init (struct acpi_srat_cpu_affinity *pa);
-void acpi_numa_x2apic_affinity_init(struct acpi_srat_x2apic_cpu_affinity *pa);
-void acpi_numa_memory_affinity_init (struct acpi_srat_mem_affinity *ma);
-void acpi_numa_arch_fixup(void);
-
-#ifdef CONFIG_ACPI_HOTPLUG_CPU
-/* Arch dependent functions for cpu hotplug support */
-int acpi_map_lsapic(acpi_handle handle, int *pcpu);
-int acpi_unmap_lsapic(int cpu);
-#endif /* CONFIG_ACPI_HOTPLUG_CPU */
-
-int acpi_register_ioapic(acpi_handle handle, u64 phys_addr, u32 gsi_base);
-int acpi_unregister_ioapic(acpi_handle handle, u32 gsi_base);
-void acpi_irq_stats_init(void);
-extern u32 acpi_irq_handled;
-extern u32 acpi_irq_not_handled;
-
-extern int sbf_port;
-extern unsigned long acpi_realmode_flags;
-
-int acpi_register_gsi (struct device *dev, u32 gsi, int triggering, int polarity);
-int acpi_gsi_to_irq (u32 gsi, unsigned int *irq);
-int acpi_isa_irq_to_gsi (unsigned isa_irq, u32 *gsi);
-
-#ifdef CONFIG_X86_IO_APIC
-extern int acpi_get_override_irq(u32 gsi, int *trigger, int *polarity);
-#else
-#define acpi_get_override_irq(gsi, trigger, polarity) (-1)
-#endif
-/*
- * This function undoes the effect of one call to acpi_register_gsi().
- * If this matches the last registration, any IRQ resources for gsi
- * are freed.
- */
-void acpi_unregister_gsi (u32 gsi);
-
-struct pci_dev;
-
-int acpi_pci_irq_enable (struct pci_dev *dev);
-void acpi_penalize_isa_irq(int irq, int active);
-
-void acpi_pci_irq_disable (struct pci_dev *dev);
-
-struct acpi_pci_driver {
-	struct acpi_pci_driver *next;
-	int (*add)(acpi_handle handle);
-	void (*remove)(acpi_handle handle);
-};
-
-int acpi_pci_register_driver(struct acpi_pci_driver *driver);
-void acpi_pci_unregister_driver(struct acpi_pci_driver *driver);
-
-extern int ec_read(u8 addr, u8 *val);
-extern int ec_write(u8 addr, u8 val);
-extern int ec_transaction(u8 command,
-                          const u8 *wdata, unsigned wdata_len,
-                          u8 *rdata, unsigned rdata_len);
-extern acpi_handle ec_get_handle(void);
-
-#if defined(CONFIG_ACPI_WMI) || defined(CONFIG_ACPI_WMI_MODULE)
-
-typedef void (*wmi_notify_handler) (u32 value, void *context);
-
-extern acpi_status wmi_evaluate_method(const char *guid, u8 instance,
-					u32 method_id,
-					const struct acpi_buffer *in,
-					struct acpi_buffer *out);
-extern acpi_status wmi_query_block(const char *guid, u8 instance,
-					struct acpi_buffer *out);
-extern acpi_status wmi_set_block(const char *guid, u8 instance,
-					const struct acpi_buffer *in);
-extern acpi_status wmi_install_notify_handler(const char *guid,
-					wmi_notify_handler handler, void *data);
-extern acpi_status wmi_remove_notify_handler(const char *guid);
-extern acpi_status wmi_get_event_data(u32 event, struct acpi_buffer *out);
-extern bool wmi_has_guid(const char *guid);
-
-#endif	/* CONFIG_ACPI_WMI */
-
-#define ACPI_VIDEO_OUTPUT_SWITCHING			0x0001
-#define ACPI_VIDEO_DEVICE_POSTING			0x0002
-#define ACPI_VIDEO_ROM_AVAILABLE			0x0004
-#define ACPI_VIDEO_BACKLIGHT				0x0008
-#define ACPI_VIDEO_BACKLIGHT_FORCE_VENDOR		0x0010
-#define ACPI_VIDEO_BACKLIGHT_FORCE_VIDEO		0x0020
-#define ACPI_VIDEO_OUTPUT_SWITCHING_FORCE_VENDOR	0x0040
-#define ACPI_VIDEO_OUTPUT_SWITCHING_FORCE_VIDEO		0x0080
-#define ACPI_VIDEO_BACKLIGHT_DMI_VENDOR			0x0100
-#define ACPI_VIDEO_BACKLIGHT_DMI_VIDEO			0x0200
-#define ACPI_VIDEO_OUTPUT_SWITCHING_DMI_VENDOR		0x0400
-#define ACPI_VIDEO_OUTPUT_SWITCHING_DMI_VIDEO		0x0800
-
-#if defined(CONFIG_ACPI_VIDEO) || defined(CONFIG_ACPI_VIDEO_MODULE)
-
-extern long acpi_video_get_capabilities(acpi_handle graphics_dev_handle);
-extern long acpi_is_video_device(struct acpi_device *device);
-extern int acpi_video_backlight_support(void);
-extern int acpi_video_display_switch_support(void);
-
-#else
-
-static inline long acpi_video_get_capabilities(acpi_handle graphics_dev_handle)
-{
-	return 0;
-}
-
-static inline long acpi_is_video_device(struct acpi_device *device)
-{
-	return 0;
-}
-
-static inline int acpi_video_backlight_support(void)
-{
-	return 0;
-}
-
-static inline int acpi_video_display_switch_support(void)
-{
-	return 0;
-}
-
-#endif /* defined(CONFIG_ACPI_VIDEO) || defined(CONFIG_ACPI_VIDEO_MODULE) */
-
-extern int acpi_blacklisted(void);
-extern void acpi_dmi_osi_linux(int enable, const struct dmi_system_id *d);
-extern void acpi_osi_setup(char *str);
-
-#ifdef CONFIG_ACPI_NUMA
-int acpi_get_pxm(acpi_handle handle);
-int acpi_get_node(acpi_handle *handle);
-#else
-static inline int acpi_get_pxm(acpi_handle handle)
-{
-	return 0;
-}
-static inline int acpi_get_node(acpi_handle *handle)
-{
-	return 0;
-}
-#endif
-extern int acpi_paddr_to_node(u64 start_addr, u64 size);
-
-extern int pnpacpi_disabled;
-
-#define PXM_INVAL	(-1)
-
-int acpi_check_resource_conflict(const struct resource *res);
-
-int acpi_check_region(resource_size_t start, resource_size_t n,
-		      const char *name);
-
-int acpi_resources_are_enforced(void);
-
-#ifdef CONFIG_PM_SLEEP
-void __init acpi_no_s4_hw_signature(void);
-void __init acpi_old_suspend_ordering(void);
-void __init acpi_nvs_nosave(void);
-#endif /* CONFIG_PM_SLEEP */
-
-struct acpi_osc_context {
-	char *uuid_str; /* uuid string */
-	int rev;
-	struct acpi_buffer cap; /* arg2/arg3 */
-	struct acpi_buffer ret; /* free by caller if success */
-};
-
-#define OSC_QUERY_TYPE			0
-#define OSC_SUPPORT_TYPE 		1
-#define OSC_CONTROL_TYPE		2
-
-/* _OSC DW0 Definition */
-#define OSC_QUERY_ENABLE		1
-#define OSC_REQUEST_ERROR		2
-#define OSC_INVALID_UUID_ERROR		4
-#define OSC_INVALID_REVISION_ERROR	8
-#define OSC_CAPABILITIES_MASK_ERROR	16
-
-acpi_status acpi_run_osc(acpi_handle handle, struct acpi_osc_context *context);
-
-/* platform-wide _OSC bits */
-#define OSC_SB_PAD_SUPPORT		1
-#define OSC_SB_PPC_OST_SUPPORT		2
-#define OSC_SB_PR3_SUPPORT		4
-#define OSC_SB_CPUHP_OST_SUPPORT	8
-#define OSC_SB_APEI_SUPPORT		16
-
-extern bool osc_sb_apei_support_acked;
-
-/* PCI defined _OSC bits */
-/* _OSC DW1 Definition (OS Support Fields) */
-#define OSC_EXT_PCI_CONFIG_SUPPORT		1
-#define OSC_ACTIVE_STATE_PWR_SUPPORT 		2
-#define OSC_CLOCK_PWR_CAPABILITY_SUPPORT	4
-#define OSC_PCI_SEGMENT_GROUPS_SUPPORT		8
-#define OSC_MSI_SUPPORT				16
-#define OSC_PCI_SUPPORT_MASKS			0x1f
-
-/* _OSC DW1 Definition (OS Control Fields) */
-#define OSC_PCI_EXPRESS_NATIVE_HP_CONTROL	1
-#define OSC_SHPC_NATIVE_HP_CONTROL 		2
-#define OSC_PCI_EXPRESS_PME_CONTROL		4
-#define OSC_PCI_EXPRESS_AER_CONTROL		8
-#define OSC_PCI_EXPRESS_CAP_STRUCTURE_CONTROL	16
-
-#define OSC_PCI_CONTROL_MASKS 	(OSC_PCI_EXPRESS_NATIVE_HP_CONTROL | 	\
-				OSC_SHPC_NATIVE_HP_CONTROL | 		\
-				OSC_PCI_EXPRESS_PME_CONTROL |		\
-				OSC_PCI_EXPRESS_AER_CONTROL |		\
-				OSC_PCI_EXPRESS_CAP_STRUCTURE_CONTROL)
-
-#define OSC_PCI_NATIVE_HOTPLUG	(OSC_PCI_EXPRESS_NATIVE_HP_CONTROL |	\
-				OSC_SHPC_NATIVE_HP_CONTROL)
-
-extern acpi_status acpi_pci_osc_control_set(acpi_handle handle,
-					     u32 *mask, u32 req);
-extern void acpi_early_init(void);
-
-extern int acpi_nvs_register(__u64 start, __u64 size);
-
-extern int acpi_nvs_for_each_region(int (*func)(__u64, __u64, void *),
-				    void *data);
-
-#else	/* !CONFIG_ACPI */
-
-#define acpi_disabled 1
-
-static inline void acpi_early_init(void) { }
-
-static inline int early_acpi_boot_init(void)
-{
-	return 0;
-}
-static inline int acpi_boot_init(void)
-{
-	return 0;
-}
-
-static inline void acpi_boot_table_init(void)
-{
-	return;
-}
-
-static inline int acpi_mps_check(void)
-{
-	return 0;
-}
-
-static inline int acpi_check_resource_conflict(struct resource *res)
-{
-	return 0;
-}
-
-static inline int acpi_check_region(resource_size_t start, resource_size_t n,
-				    const char *name)
-{
-	return 0;
-}
-
-struct acpi_table_header;
-static inline int acpi_table_parse(char *id,
-				int (*handler)(struct acpi_table_header *))
-{
-	return -1;
-}
-
-static inline int acpi_nvs_register(__u64 start, __u64 size)
-{
-	return 0;
-}
-
-static inline int acpi_nvs_for_each_region(int (*func)(__u64, __u64, void *),
-					   void *data)
-{
-	return 0;
-}
-
-#endif	/* !CONFIG_ACPI */
-
-#ifdef CONFIG_ACPI
-void acpi_os_set_prepare_sleep(int (*func)(u8 sleep_state,
-			       u32 pm1a_ctrl,  u32 pm1b_ctrl));
-
-acpi_status acpi_os_prepare_sleep(u8 sleep_state,
-				  u32 pm1a_control, u32 pm1b_control);
-#else
-#define acpi_os_set_prepare_sleep(func, pm1a_ctrl, pm1b_ctrl) do { } while (0)
-#endif
-
-#endif	/*_LINUX_ACPI_H*/
diff --git a/ANDROID_3.4.5/include/linux/acpi_io.h b/ANDROID_3.4.5/include/linux/acpi_io.h
deleted file mode 100644
index b0ffa219..00000000
--- a/ANDROID_3.4.5/include/linux/acpi_io.h
+++ /dev/null
@@ -1,18 +0,0 @@
-#ifndef _ACPI_IO_H_
-#define _ACPI_IO_H_
-
-#include <linux/io.h>
-#include <acpi/acpi.h>
-
-static inline void __iomem *acpi_os_ioremap(acpi_physical_address phys,
-					    acpi_size size)
-{
-       return ioremap_cache(phys, size);
-}
-
-void __iomem *acpi_os_get_iomem(acpi_physical_address phys, unsigned int size);
-
-int acpi_os_map_generic_address(struct acpi_generic_address *addr);
-void acpi_os_unmap_generic_address(struct acpi_generic_address *addr);
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/acpi_pmtmr.h b/ANDROID_3.4.5/include/linux/acpi_pmtmr.h
deleted file mode 100644
index 1d0ef1ae..00000000
--- a/ANDROID_3.4.5/include/linux/acpi_pmtmr.h
+++ /dev/null
@@ -1,38 +0,0 @@
-#ifndef _ACPI_PMTMR_H_
-#define _ACPI_PMTMR_H_
-
-#include <linux/clocksource.h>
-
-/* Number of PMTMR ticks expected during calibration run */
-#define PMTMR_TICKS_PER_SEC 3579545
-
-/* limit it to 24 bits */
-#define ACPI_PM_MASK CLOCKSOURCE_MASK(24)
-
-/* Overrun value */
-#define ACPI_PM_OVRRUN	(1<<24)
-
-#ifdef CONFIG_X86_PM_TIMER
-
-extern u32 acpi_pm_read_verified(void);
-extern u32 pmtmr_ioport;
-
-static inline u32 acpi_pm_read_early(void)
-{
-	if (!pmtmr_ioport)
-		return 0;
-	/* mask the output to 24 bits */
-	return acpi_pm_read_verified() & ACPI_PM_MASK;
-}
-
-#else
-
-static inline u32 acpi_pm_read_early(void)
-{
-	return 0;
-}
-
-#endif
-
-#endif
-
diff --git a/ANDROID_3.4.5/include/linux/adb.h b/ANDROID_3.4.5/include/linux/adb.h
deleted file mode 100644
index 63bca502..00000000
--- a/ANDROID_3.4.5/include/linux/adb.h
+++ /dev/null
@@ -1,103 +0,0 @@
-/*
- * Definitions for ADB (Apple Desktop Bus) support.
- */
-#ifndef __ADB_H
-#define __ADB_H
-
-/* ADB commands */
-#define ADB_BUSRESET		0
-#define ADB_FLUSH(id)		(0x01 | ((id) << 4))
-#define ADB_WRITEREG(id, reg)	(0x08 | (reg) | ((id) << 4))
-#define ADB_READREG(id, reg)	(0x0C | (reg) | ((id) << 4))
-
-/* ADB default device IDs (upper 4 bits of ADB command byte) */
-#define ADB_DONGLE	1	/* "software execution control" devices */
-#define ADB_KEYBOARD	2
-#define ADB_MOUSE	3
-#define ADB_TABLET	4
-#define ADB_MODEM	5
-#define ADB_MISC	7	/* maybe a monitor */
-
-#define ADB_RET_OK	0
-#define ADB_RET_TIMEOUT	3
-
-/* The kind of ADB request. The controller may emulate some
-   or all of those CUDA/PMU packet kinds */
-#define ADB_PACKET	0
-#define CUDA_PACKET	1
-#define ERROR_PACKET	2
-#define TIMER_PACKET	3
-#define POWER_PACKET	4
-#define MACIIC_PACKET	5
-#define PMU_PACKET	6
-#define ADB_QUERY	7
-
-/* ADB queries */
-
-/* ADB_QUERY_GETDEVINFO
- * Query ADB slot for device presence
- * data[2] = id, rep[0] = orig addr, rep[1] = handler_id
- */
-#define ADB_QUERY_GETDEVINFO	1
-
-#ifdef __KERNEL__
-
-struct adb_request {
-	unsigned char data[32];
-	int nbytes;
-	unsigned char reply[32];
-	int reply_len;
-	unsigned char reply_expected;
-	unsigned char sent;
-	unsigned char complete;
-	void (*done)(struct adb_request *);
-	void *arg;
-	struct adb_request *next;
-};
-
-struct adb_ids {
-	int nids;
-	unsigned char id[16];
-};
-
-/* Structure which encapsulates a low-level ADB driver */
-
-struct adb_driver {
-	char name[16];
-	int (*probe)(void);
-	int (*init)(void);
-	int (*send_request)(struct adb_request *req, int sync);
-	int (*autopoll)(int devs);
-	void (*poll)(void);
-	int (*reset_bus)(void);
-};
-
-/* Values for adb_request flags */
-#define ADBREQ_REPLY	1	/* expect reply */
-#define ADBREQ_SYNC	2	/* poll until done */
-#define ADBREQ_NOSEND	4	/* build the request, but don't send it */
-
-/* Messages sent thru the client_list notifier. You should NOT stop
-   the operation, at least not with this version */
-enum adb_message {
-    ADB_MSG_POWERDOWN,	/* Currently called before sleep only */
-    ADB_MSG_PRE_RESET,	/* Called before resetting the bus */
-    ADB_MSG_POST_RESET	/* Called after resetting the bus (re-do init & register) */
-};
-extern struct blocking_notifier_head adb_client_list;
-
-int adb_request(struct adb_request *req, void (*done)(struct adb_request *),
-		int flags, int nbytes, ...);
-int adb_register(int default_id,int handler_id,struct adb_ids *ids,
-		 void (*handler)(unsigned char *, int, int));
-int adb_unregister(int index);
-void adb_poll(void);
-void adb_input(unsigned char *, int, int);
-int adb_reset_bus(void);
-
-int adb_try_handler_change(int address, int new_id);
-int adb_get_infos(int address, int *original_address, int *handler_id);
-
-#endif /* __KERNEL__ */
-
-#endif /* __ADB_H */
diff --git a/ANDROID_3.4.5/include/linux/adfs_fs.h b/ANDROID_3.4.5/include/linux/adfs_fs.h
deleted file mode 100644
index b19801f7..00000000
--- a/ANDROID_3.4.5/include/linux/adfs_fs.h
+++ /dev/null
@@ -1,63 +0,0 @@
-#ifndef _ADFS_FS_H
-#define _ADFS_FS_H
-
-#include <linux/types.h>
-#include <linux/magic.h>
-
-/*
- * Disc Record at disc address 0xc00
- */
-struct adfs_discrecord {
-    __u8  log2secsize;
-    __u8  secspertrack;
-    __u8  heads;
-    __u8  density;
-    __u8  idlen;
-    __u8  log2bpmb;
-    __u8  skew;
-    __u8  bootoption;
-    __u8  lowsector;
-    __u8  nzones;
-    __le16 zone_spare;
-    __le32 root;
-    __le32 disc_size;
-    __le16 disc_id;
-    __u8  disc_name[10];
-    __le32 disc_type;
-    __le32 disc_size_high;
-    __u8  log2sharesize:4;
-    __u8  unused40:4;
-    __u8  big_flag:1;
-    __u8  unused41:1;
-    __u8  nzones_high;
-    __le32 format_version;
-    __le32 root_size;
-    __u8  unused52[60 - 52];
-};
-
-#define ADFS_DISCRECORD		(0xc00)
-#define ADFS_DR_OFFSET		(0x1c0)
-#define ADFS_DR_SIZE		 60
-#define ADFS_DR_SIZE_BITS	(ADFS_DR_SIZE << 3)
-
-#ifdef __KERNEL__
-/*
- * Calculate the boot block checksum on an ADFS drive.  Note that this will
- * appear to be correct if the sector contains all zeros, so also check that
- * the disk size is non-zero!!!
- */
-static inline int adfs_checkbblk(unsigned char *ptr)
-{
-	unsigned int result = 0;
-	unsigned char *p = ptr + 511;
-
-	do {
-	        result = (result & 0xff) + (result >> 8);
-        	result = result + *--p;
-	} while (p != ptr);
-
-	return (result & 0xff) != ptr[511];
-}
-#endif
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/aer.h b/ANDROID_3.4.5/include/linux/aer.h
deleted file mode 100644
index 544abdb2..00000000
--- a/ANDROID_3.4.5/include/linux/aer.h
+++ /dev/null
@@ -1,58 +0,0 @@
-/*
- * Copyright (C) 2006 Intel Corp.
- *     Tom Long Nguyen (tom.l.nguyen@intel.com)
- *     Zhang Yanmin (yanmin.zhang@intel.com)
- */
-
-#ifndef _AER_H_
-#define _AER_H_
-
-struct aer_header_log_regs {
-	unsigned int dw0;
-	unsigned int dw1;
-	unsigned int dw2;
-	unsigned int dw3;
-};
-
-struct aer_capability_regs {
-	u32 header;
-	u32 uncor_status;
-	u32 uncor_mask;
-	u32 uncor_severity;
-	u32 cor_status;
-	u32 cor_mask;
-	u32 cap_control;
-	struct aer_header_log_regs header_log;
-	u32 root_command;
-	u32 root_status;
-	u16 cor_err_source;
-	u16 uncor_err_source;
-};
-
-#if defined(CONFIG_PCIEAER)
-/* pci-e port driver needs this function to enable aer */
-extern int pci_enable_pcie_error_reporting(struct pci_dev *dev);
-extern int pci_disable_pcie_error_reporting(struct pci_dev *dev);
-extern int pci_cleanup_aer_uncorrect_error_status(struct pci_dev *dev);
-#else
-static inline int pci_enable_pcie_error_reporting(struct pci_dev *dev)
-{
-	return -EINVAL;
-}
-static inline int pci_disable_pcie_error_reporting(struct pci_dev *dev)
-{
-	return -EINVAL;
-}
-static inline int pci_cleanup_aer_uncorrect_error_status(struct pci_dev *dev)
-{
-	return -EINVAL;
-}
-#endif
-
-extern void cper_print_aer(const char *prefix, int cper_severity,
-			   struct aer_capability_regs *aer);
-extern int cper_severity_to_aer(int cper_severity);
-extern void aer_recover_queue(int domain, unsigned int bus, unsigned int devfn,
-			      int severity);
-#endif //_AER_H_
-
diff --git a/ANDROID_3.4.5/include/linux/affs_hardblocks.h b/ANDROID_3.4.5/include/linux/affs_hardblocks.h
deleted file mode 100644
index f1b948c1..00000000
--- a/ANDROID_3.4.5/include/linux/affs_hardblocks.h
+++ /dev/null
@@ -1,68 +0,0 @@
-#ifndef	AFFS_HARDBLOCKS_H
-#define	AFFS_HARDBLOCKS_H
-
-#include <linux/types.h>
-
-/* Just the needed definitions for the RDB of an Amiga HD. */
-
-struct RigidDiskBlock {
-	__u32	rdb_ID;
-	__be32	rdb_SummedLongs;
-	__s32	rdb_ChkSum;
-	__u32	rdb_HostID;
-	__be32	rdb_BlockBytes;
-	__u32	rdb_Flags;
-	__u32	rdb_BadBlockList;
-	__be32	rdb_PartitionList;
-	__u32	rdb_FileSysHeaderList;
-	__u32	rdb_DriveInit;
-	__u32	rdb_Reserved1[6];
-	__u32	rdb_Cylinders;
-	__u32	rdb_Sectors;
-	__u32	rdb_Heads;
-	__u32	rdb_Interleave;
-	__u32	rdb_Park;
-	__u32	rdb_Reserved2[3];
-	__u32	rdb_WritePreComp;
-	__u32	rdb_ReducedWrite;
-	__u32	rdb_StepRate;
-	__u32	rdb_Reserved3[5];
-	__u32	rdb_RDBBlocksLo;
-	__u32	rdb_RDBBlocksHi;
-	__u32	rdb_LoCylinder;
-	__u32	rdb_HiCylinder;
-	__u32	rdb_CylBlocks;
-	__u32	rdb_AutoParkSeconds;
-	__u32	rdb_HighRDSKBlock;
-	__u32	rdb_Reserved4;
-	char	rdb_DiskVendor[8];
-	char	rdb_DiskProduct[16];
-	char	rdb_DiskRevision[4];
-	char	rdb_ControllerVendor[8];
-	char	rdb_ControllerProduct[16];
-	char	rdb_ControllerRevision[4];
-	__u32	rdb_Reserved5[10];
-};
-
-#define	IDNAME_RIGIDDISK	0x5244534B	/* "RDSK" */
-
-struct PartitionBlock {
-	__be32	pb_ID;
-	__be32	pb_SummedLongs;
-	__s32	pb_ChkSum;
-	__u32	pb_HostID;
-	__be32	pb_Next;
-	__u32	pb_Flags;
-	__u32	pb_Reserved1[2];
-	__u32	pb_DevFlags;
-	__u8	pb_DriveName[32];
-	__u32	pb_Reserved2[15];
-	__be32	pb_Environment[17];
-	__u32	pb_EReserved[15];
-};
-
-#define	IDNAME_PARTITION	0x50415254	/* "PART" */
-
-#define RDB_ALLOCATION_LIMIT	16
-
-#endif	/* AFFS_HARDBLOCKS_H */
diff --git a/ANDROID_3.4.5/include/linux/agp_backend.h b/ANDROID_3.4.5/include/linux/agp_backend.h
deleted file mode 100644
index eaf6cd75..00000000
--- a/ANDROID_3.4.5/include/linux/agp_backend.h
+++ /dev/null
@@ -1,109 +0,0 @@
-/*
- * AGPGART backend specific includes. Not for userspace consumption.
- *
- * Copyright (C) 2004 Silicon Graphics, Inc.
- * Copyright (C) 2002-2003 Dave Jones
- * Copyright (C) 1999 Jeff Hartmann
- * Copyright (C) 1999 Precision Insight, Inc.
- * Copyright (C) 1999 Xi Graphics, Inc.
- *
- * Permission is hereby granted, free of charge, to any person obtaining a
- * copy of this software and associated documentation files (the "Software"),
- * to deal in the Software without restriction, including without limitation
- * the rights to use, copy, modify, merge, publish, distribute, sublicense,
- * and/or sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included
- * in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
- * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
- * JEFF HARTMANN, OR ANY OTHER CONTRIBUTORS BE LIABLE FOR ANY CLAIM, 
- * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR 
- * OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE 
- * OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
- *
- */
-
-#ifndef _AGP_BACKEND_H
-#define _AGP_BACKEND_H 1
-
-#include <linux/list.h>
-
-enum chipset_type {
-	NOT_SUPPORTED,
-	SUPPORTED,
-};
-
-struct agp_version {
-	u16 major;
-	u16 minor;
-};
-
-struct agp_kern_info {
-	struct agp_version version;
-	struct pci_dev *device;
-	enum chipset_type chipset;
-	unsigned long mode;
-	unsigned long aper_base;
-	size_t aper_size;
-	int max_memory;		/* In pages */
-	int current_memory;
-	bool cant_use_aperture;
-	unsigned long page_mask;
-	const struct vm_operations_struct *vm_ops;
-};
-
-/*
- * The agp_memory structure has information about the block of agp memory
- * allocated.  A caller may manipulate the next and prev pointers to link
- * each allocated item into a list.  These pointers are ignored by the backend.
- * Everything else should never be written to, but the caller may read any of
- * the items to determine the status of this block of agp memory.
- */
-
-struct agp_bridge_data;
-
-struct agp_memory {
-	struct agp_memory *next;
-	struct agp_memory *prev;
-	struct agp_bridge_data *bridge;
-	struct page **pages;
-	size_t page_count;
-	int key;
-	int num_scratch_pages;
-	off_t pg_start;
-	u32 type;
-	u32 physical;
-	bool is_bound;
-	bool is_flushed;
-	/* list of agp_memory mapped to the aperture */
-	struct list_head mapped_list;
-	/* DMA-mapped addresses */
-	struct scatterlist *sg_list;
-	int num_sg;
-};
-
-#define AGP_NORMAL_MEMORY 0
-
-#define AGP_USER_TYPES (1 << 16)
-#define AGP_USER_MEMORY (AGP_USER_TYPES)
-#define AGP_USER_CACHED_MEMORY (AGP_USER_TYPES + 1)
-
-extern struct agp_bridge_data *agp_bridge;
-extern struct list_head agp_bridges;
-
-extern struct agp_bridge_data *(*agp_find_bridge)(struct pci_dev *);
-
-extern void agp_free_memory(struct agp_memory *);
-extern struct agp_memory *agp_allocate_memory(struct agp_bridge_data *, size_t, u32);
-extern int agp_copy_info(struct agp_bridge_data *, struct agp_kern_info *);
-extern int agp_bind_memory(struct agp_memory *, off_t);
-extern int agp_unbind_memory(struct agp_memory *);
-extern void agp_enable(struct agp_bridge_data *, u32);
-extern struct agp_bridge_data *agp_backend_acquire(struct pci_dev *);
-extern void agp_backend_release(struct agp_bridge_data *);
-
-#endif				/* _AGP_BACKEND_H */
diff --git a/ANDROID_3.4.5/include/linux/agpgart.h b/ANDROID_3.4.5/include/linux/agpgart.h
deleted file mode 100644
index f6778ece..00000000
--- a/ANDROID_3.4.5/include/linux/agpgart.h
+++ /dev/null
@@ -1,214 +0,0 @@
-/*
- * AGPGART module version 0.99
- * Copyright (C) 1999 Jeff Hartmann
- * Copyright (C) 1999 Precision Insight, Inc.
- * Copyright (C) 1999 Xi Graphics, Inc.
- *
- * Permission is hereby granted, free of charge, to any person obtaining a
- * copy of this software and associated documentation files (the "Software"),
- * to deal in the Software without restriction, including without limitation
- * the rights to use, copy, modify, merge, publish, distribute, sublicense,
- * and/or sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included
- * in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
- * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
- * JEFF HARTMANN, OR ANY OTHER CONTRIBUTORS BE LIABLE FOR ANY CLAIM, 
- * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR 
- * OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE 
- * OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
- *
- */
-
-#ifndef _AGP_H
-#define _AGP_H 1
-
-#define AGPIOC_BASE       'A'
-#define AGPIOC_INFO       _IOR (AGPIOC_BASE, 0, struct agp_info*)
-#define AGPIOC_ACQUIRE    _IO  (AGPIOC_BASE, 1)
-#define AGPIOC_RELEASE    _IO  (AGPIOC_BASE, 2)
-#define AGPIOC_SETUP      _IOW (AGPIOC_BASE, 3, struct agp_setup*)
-#define AGPIOC_RESERVE    _IOW (AGPIOC_BASE, 4, struct agp_region*)
-#define AGPIOC_PROTECT    _IOW (AGPIOC_BASE, 5, struct agp_region*)
-#define AGPIOC_ALLOCATE   _IOWR(AGPIOC_BASE, 6, struct agp_allocate*)
-#define AGPIOC_DEALLOCATE _IOW (AGPIOC_BASE, 7, int)
-#define AGPIOC_BIND       _IOW (AGPIOC_BASE, 8, struct agp_bind*)
-#define AGPIOC_UNBIND     _IOW (AGPIOC_BASE, 9, struct agp_unbind*)
-#define AGPIOC_CHIPSET_FLUSH _IO (AGPIOC_BASE, 10)
-
-#define AGP_DEVICE      "/dev/agpgart"
-
-#ifndef TRUE
-#define TRUE 1
-#endif
-
-#ifndef FALSE
-#define FALSE 0
-#endif
-
-#ifndef __KERNEL__
-#include <linux/types.h>
-
-struct agp_version {
-	__u16 major;
-	__u16 minor;
-};
-
-typedef struct _agp_info {
-	struct agp_version version;	/* version of the driver        */
-	__u32 bridge_id;	/* bridge vendor/device         */
-	__u32 agp_mode;		/* mode info of bridge          */
-	unsigned long aper_base;/* base of aperture             */
-	size_t aper_size;	/* size of aperture             */
-	size_t pg_total;	/* max pages (swap + system)    */
-	size_t pg_system;	/* max pages (system)           */
-	size_t pg_used;		/* current pages used           */
-} agp_info;
-
-typedef struct _agp_setup {
-	__u32 agp_mode;		/* mode info of bridge          */
-} agp_setup;
-
-/*
- * The "prot" down below needs still a "sleep" flag somehow ...
- */
-typedef struct _agp_segment {
-	__kernel_off_t pg_start;	/* starting page to populate    */
-	__kernel_size_t pg_count;	/* number of pages              */
-	int prot;			/* prot flags for mmap          */
-} agp_segment;
-
-typedef struct _agp_region {
-	__kernel_pid_t pid;		/* pid of process       */
-	__kernel_size_t seg_count;	/* number of segments   */
-	struct _agp_segment *seg_list;
-} agp_region;
-
-typedef struct _agp_allocate {
-	int key;		/* tag of allocation            */
-	__kernel_size_t pg_count;/* number of pages             */
-	__u32 type;		/* 0 == normal, other devspec   */
-   	__u32 physical;         /* device specific (some devices  
-				 * need a phys address of the     
-				 * actual page behind the gatt    
-				 * table)                        */
-} agp_allocate;
-
-typedef struct _agp_bind {
-	int key;		/* tag of allocation            */
-	__kernel_off_t pg_start;/* starting page to populate    */
-} agp_bind;
-
-typedef struct _agp_unbind {
-	int key;		/* tag of allocation            */
-	__u32 priority;		/* priority for paging out      */
-} agp_unbind;
-
-#else				/* __KERNEL__ */
-#include <linux/mutex.h>
-#include <linux/agp_backend.h>
-
-#define AGPGART_MINOR 175
-
-struct agp_info {
-	struct agp_version version;	/* version of the driver        */
-	u32 bridge_id;		/* bridge vendor/device         */
-	u32 agp_mode;		/* mode info of bridge          */
-	unsigned long aper_base;/* base of aperture             */
-	size_t aper_size;	/* size of aperture             */
-	size_t pg_total;	/* max pages (swap + system)    */
-	size_t pg_system;	/* max pages (system)           */
-	size_t pg_used;		/* current pages used           */
-};
-
-struct agp_setup {
-	u32 agp_mode;		/* mode info of bridge          */
-};
-
-/*
- * The "prot" down below needs still a "sleep" flag somehow ...
- */
-struct agp_segment {
-	off_t pg_start;		/* starting page to populate    */
-	size_t pg_count;	/* number of pages              */
-	int prot;		/* prot flags for mmap          */
-};
-
-struct agp_segment_priv {
-	off_t pg_start;
-	size_t pg_count;
-	pgprot_t prot;
-};
-
-struct agp_region {
-	pid_t pid;		/* pid of process               */
-	size_t seg_count;	/* number of segments           */
-	struct agp_segment *seg_list;
-};
-
-struct agp_allocate {
-	int key;		/* tag of allocation            */
-	size_t pg_count;	/* number of pages              */
-	u32 type;		/* 0 == normal, other devspec   */
-	u32 physical;           /* device specific (some devices  
-				 * need a phys address of the     
-				 * actual page behind the gatt    
-				 * table)                        */
-};
-
-struct agp_bind {
-	int key;		/* tag of allocation            */
-	off_t pg_start;		/* starting page to populate    */
-};
-
-struct agp_unbind {
-	int key;		/* tag of allocation            */
-	u32 priority;		/* priority for paging out      */
-};
-
-struct agp_client {
-	struct agp_client *next;
-	struct agp_client *prev;
-	pid_t pid;
-	int num_segments;
-	struct agp_segment_priv **segments;
-};
-
-struct agp_controller {
-	struct agp_controller *next;
-	struct agp_controller *prev;
-	pid_t pid;
-	int num_clients;
-	struct agp_memory *pool;
-	struct agp_client *clients;
-};
-
-#define AGP_FF_ALLOW_CLIENT		0
-#define AGP_FF_ALLOW_CONTROLLER 	1
-#define AGP_FF_IS_CLIENT		2
-#define AGP_FF_IS_CONTROLLER		3
-#define AGP_FF_IS_VALID 		4
-
-struct agp_file_private {
-	struct agp_file_private *next;
-	struct agp_file_private *prev;
-	pid_t my_pid;
-	unsigned long access_flags;	/* long req'd for set_bit --RR */
-};
-
-struct agp_front_data {
-	struct mutex agp_mutex;
-	struct agp_controller *current_controller;
-	struct agp_controller *controllers;
-	struct agp_file_private *file_priv_list;
-	bool used_by_controller;
-	bool backend_acquired;
-};
-
-#endif				/* __KERNEL__ */
-
-#endif				/* _AGP_H */
diff --git a/ANDROID_3.4.5/include/linux/ahci_platform.h b/ANDROID_3.4.5/include/linux/ahci_platform.h
deleted file mode 100644
index 73a25005..00000000
--- a/ANDROID_3.4.5/include/linux/ahci_platform.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * AHCI SATA platform driver
- *
- * Copyright 2004-2005  Red Hat, Inc.
- *   Jeff Garzik <jgarzik@pobox.com>
- * Copyright 2010  MontaVista Software, LLC.
- *   Anton Vorontsov <avorontsov@ru.mvista.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- */
-
-#ifndef _AHCI_PLATFORM_H
-#define _AHCI_PLATFORM_H
-
-#include <linux/compiler.h>
-
-struct device;
-struct ata_port_info;
-
-struct ahci_platform_data {
-	int (*init)(struct device *dev, void __iomem *addr);
-	void (*exit)(struct device *dev);
-	int (*suspend)(struct device *dev);
-	int (*resume)(struct device *dev);
-	const struct ata_port_info *ata_port_info;
-	unsigned int force_port_map;
-	unsigned int mask_port_map;
-};
-
-#endif /* _AHCI_PLATFORM_H */
diff --git a/ANDROID_3.4.5/include/linux/aio.h b/ANDROID_3.4.5/include/linux/aio.h
deleted file mode 100644
index b1a520ec..00000000
--- a/ANDROID_3.4.5/include/linux/aio.h
+++ /dev/null
@@ -1,240 +0,0 @@
-#ifndef __LINUX__AIO_H
-#define __LINUX__AIO_H
-
-#include <linux/list.h>
-#include <linux/workqueue.h>
-#include <linux/aio_abi.h>
-#include <linux/uio.h>
-#include <linux/rcupdate.h>
-
-#include <linux/atomic.h>
-
-#define AIO_MAXSEGS		4
-#define AIO_KIOGRP_NR_ATOMIC	8
-
-struct kioctx;
-
-/* Notes on cancelling a kiocb:
- *	If a kiocb is cancelled, aio_complete may return 0 to indicate 
- *	that cancel has not yet disposed of the kiocb.  All cancel 
- *	operations *must* call aio_put_req to dispose of the kiocb 
- *	to guard against races with the completion code.
- */
-#define KIOCB_C_CANCELLED	0x01
-#define KIOCB_C_COMPLETE	0x02
-
-#define KIOCB_SYNC_KEY		(~0U)
-
-/* ki_flags bits */
-/*
- * This may be used for cancel/retry serialization in the future, but
- * for now it's unused and we probably don't want modules to even
- * think they can use it.
- */
-/* #define KIF_LOCKED		0 */
-#define KIF_KICKED		1
-#define KIF_CANCELLED		2
-
-#define kiocbTryLock(iocb)	test_and_set_bit(KIF_LOCKED, &(iocb)->ki_flags)
-#define kiocbTryKick(iocb)	test_and_set_bit(KIF_KICKED, &(iocb)->ki_flags)
-
-#define kiocbSetLocked(iocb)	set_bit(KIF_LOCKED, &(iocb)->ki_flags)
-#define kiocbSetKicked(iocb)	set_bit(KIF_KICKED, &(iocb)->ki_flags)
-#define kiocbSetCancelled(iocb)	set_bit(KIF_CANCELLED, &(iocb)->ki_flags)
-
-#define kiocbClearLocked(iocb)	clear_bit(KIF_LOCKED, &(iocb)->ki_flags)
-#define kiocbClearKicked(iocb)	clear_bit(KIF_KICKED, &(iocb)->ki_flags)
-#define kiocbClearCancelled(iocb)	clear_bit(KIF_CANCELLED, &(iocb)->ki_flags)
-
-#define kiocbIsLocked(iocb)	test_bit(KIF_LOCKED, &(iocb)->ki_flags)
-#define kiocbIsKicked(iocb)	test_bit(KIF_KICKED, &(iocb)->ki_flags)
-#define kiocbIsCancelled(iocb)	test_bit(KIF_CANCELLED, &(iocb)->ki_flags)
-
-/* is there a better place to document function pointer methods? */
-/**
- * ki_retry	-	iocb forward progress callback
- * @kiocb:	The kiocb struct to advance by performing an operation.
- *
- * This callback is called when the AIO core wants a given AIO operation
- * to make forward progress.  The kiocb argument describes the operation
- * that is to be performed.  As the operation proceeds, perhaps partially,
- * ki_retry is expected to update the kiocb with progress made.  Typically
- * ki_retry is set in the AIO core and it itself calls file_operations
- * helpers.
- *
- * ki_retry's return value determines when the AIO operation is completed
- * and an event is generated in the AIO event ring.  Except the special
- * return values described below, the value that is returned from ki_retry
- * is transferred directly into the completion ring as the operation's
- * resulting status.  Once this has happened ki_retry *MUST NOT* reference
- * the kiocb pointer again.
- *
- * If ki_retry returns -EIOCBQUEUED it has made a promise that aio_complete()
- * will be called on the kiocb pointer in the future.  The AIO core will
- * not ask the method again -- ki_retry must ensure forward progress.
- * aio_complete() must be called once and only once in the future, multiple
- * calls may result in undefined behaviour.
- *
- * If ki_retry returns -EIOCBRETRY it has made a promise that kick_iocb()
- * will be called on the kiocb pointer in the future.  This may happen
- * through generic helpers that associate kiocb->ki_wait with a wait
- * queue head that ki_retry uses via current->io_wait.  It can also happen
- * with custom tracking and manual calls to kick_iocb(), though that is
- * discouraged.  In either case, kick_iocb() must be called once and only
- * once.  ki_retry must ensure forward progress, the AIO core will wait
- * indefinitely for kick_iocb() to be called.
- */
-struct kiocb {
-	struct list_head	ki_run_list;
-	unsigned long		ki_flags;
-	int			ki_users;
-	unsigned		ki_key;		/* id of this request */
-
-	struct file		*ki_filp;
-	struct kioctx		*ki_ctx;	/* may be NULL for sync ops */
-	int			(*ki_cancel)(struct kiocb *, struct io_event *);
-	ssize_t			(*ki_retry)(struct kiocb *);
-	void			(*ki_dtor)(struct kiocb *);
-
-	union {
-		void __user		*user;
-		struct task_struct	*tsk;
-	} ki_obj;
-
-	__u64			ki_user_data;	/* user's data for completion */
-	loff_t			ki_pos;
-
-	void			*private;
-	/* State that we remember to be able to restart/retry  */
-	unsigned short		ki_opcode;
-	size_t			ki_nbytes; 	/* copy of iocb->aio_nbytes */
-	char 			__user *ki_buf;	/* remaining iocb->aio_buf */
-	size_t			ki_left; 	/* remaining bytes */
-	struct iovec		ki_inline_vec;	/* inline vector */
- 	struct iovec		*ki_iovec;
- 	unsigned long		ki_nr_segs;
- 	unsigned long		ki_cur_seg;
-
-	struct list_head	ki_list;	/* the aio core uses this
-						 * for cancellation */
-	struct list_head	ki_batch;	/* batch allocation */
-
-	/*
-	 * If the aio_resfd field of the userspace iocb is not zero,
-	 * this is the underlying eventfd context to deliver events to.
-	 */
-	struct eventfd_ctx	*ki_eventfd;
-};
-
-#define is_sync_kiocb(iocb)	((iocb)->ki_key == KIOCB_SYNC_KEY)
-#define init_sync_kiocb(x, filp)			\
-	do {						\
-		struct task_struct *tsk = current;	\
-		(x)->ki_flags = 0;			\
-		(x)->ki_users = 1;			\
-		(x)->ki_key = KIOCB_SYNC_KEY;		\
-		(x)->ki_filp = (filp);			\
-		(x)->ki_ctx = NULL;			\
-		(x)->ki_cancel = NULL;			\
-		(x)->ki_retry = NULL;			\
-		(x)->ki_dtor = NULL;			\
-		(x)->ki_obj.tsk = tsk;			\
-		(x)->ki_user_data = 0;                  \
-		(x)->private = NULL;			\
-	} while (0)
-
-#define AIO_RING_MAGIC			0xa10a10a1
-#define AIO_RING_COMPAT_FEATURES	1
-#define AIO_RING_INCOMPAT_FEATURES	0
-struct aio_ring {
-	unsigned	id;	/* kernel internal index number */
-	unsigned	nr;	/* number of io_events */
-	unsigned	head;
-	unsigned	tail;
-
-	unsigned	magic;
-	unsigned	compat_features;
-	unsigned	incompat_features;
-	unsigned	header_length;	/* size of aio_ring */
-
-
-	struct io_event		io_events[0];
-}; /* 128 bytes + ring size */
-
-#define aio_ring_avail(info, ring)	(((ring)->head + (info)->nr - 1 - (ring)->tail) % (info)->nr)
-
-#define AIO_RING_PAGES	8
-struct aio_ring_info {
-	unsigned long		mmap_base;
-	unsigned long		mmap_size;
-
-	struct page		**ring_pages;
-	spinlock_t		ring_lock;
-	long			nr_pages;
-
-	unsigned		nr, tail;
-
-	struct page		*internal_pages[AIO_RING_PAGES];
-};
-
-struct kioctx {
-	atomic_t		users;
-	int			dead;
-	struct mm_struct	*mm;
-
-	/* This needs improving */
-	unsigned long		user_id;
-	struct hlist_node	list;
-
-	wait_queue_head_t	wait;
-
-	spinlock_t		ctx_lock;
-
-	int			reqs_active;
-	struct list_head	active_reqs;	/* used for cancellation */
-	struct list_head	run_list;	/* used for kicked reqs */
-
-	/* sys_io_setup currently limits this to an unsigned int */
-	unsigned		max_reqs;
-
-	struct aio_ring_info	ring_info;
-
-	struct delayed_work	wq;
-
-	struct rcu_head		rcu_head;
-};
-
-/* prototypes */
-extern unsigned aio_max_size;
-
-#ifdef CONFIG_AIO
-extern ssize_t wait_on_sync_kiocb(struct kiocb *iocb);
-extern int aio_put_req(struct kiocb *iocb);
-extern void kick_iocb(struct kiocb *iocb);
-extern int aio_complete(struct kiocb *iocb, long res, long res2);
-struct mm_struct;
-extern void exit_aio(struct mm_struct *mm);
-extern long do_io_submit(aio_context_t ctx_id, long nr,
-			 struct iocb __user *__user *iocbpp, bool compat);
-#else
-static inline ssize_t wait_on_sync_kiocb(struct kiocb *iocb) { return 0; }
-static inline int aio_put_req(struct kiocb *iocb) { return 0; }
-static inline void kick_iocb(struct kiocb *iocb) { }
-static inline int aio_complete(struct kiocb *iocb, long res, long res2) { return 0; }
-struct mm_struct;
-static inline void exit_aio(struct mm_struct *mm) { }
-static inline long do_io_submit(aio_context_t ctx_id, long nr,
-				struct iocb __user * __user *iocbpp,
-				bool compat) { return 0; }
-#endif /* CONFIG_AIO */
-
-static inline struct kiocb *list_kiocb(struct list_head *h)
-{
-	return list_entry(h, struct kiocb, ki_list);
-}
-
-/* for sysctl: */
-extern unsigned long aio_nr;
-extern unsigned long aio_max_nr;
-
-#endif /* __LINUX__AIO_H */
diff --git a/ANDROID_3.4.5/include/linux/aio_abi.h b/ANDROID_3.4.5/include/linux/aio_abi.h
deleted file mode 100644
index 86fa7a71..00000000
--- a/ANDROID_3.4.5/include/linux/aio_abi.h
+++ /dev/null
@@ -1,111 +0,0 @@
-/* include/linux/aio_abi.h
- *
- * Copyright 2000,2001,2002 Red Hat.
- *
- * Written by Benjamin LaHaise <bcrl@kvack.org>
- *
- * Distribute under the terms of the GPLv2 (see ../../COPYING) or under 
- * the following terms.
- *
- * Permission to use, copy, modify, and distribute this software and its
- * documentation is hereby granted, provided that the above copyright
- * notice appears in all copies.  This software is provided without any
- * warranty, express or implied.  Red Hat makes no representations about
- * the suitability of this software for any purpose.
- *
- * IN NO EVENT SHALL RED HAT BE LIABLE TO ANY PARTY FOR DIRECT, INDIRECT,
- * SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OF
- * THIS SOFTWARE AND ITS DOCUMENTATION, EVEN IF RED HAT HAS BEEN ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * RED HAT DISCLAIMS ANY WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE.  THE SOFTWARE PROVIDED HEREUNDER IS ON AN "AS IS" BASIS, AND
- * RED HAT HAS NO OBLIGATION TO PROVIDE MAINTENANCE, SUPPORT, UPDATES,
- * ENHANCEMENTS, OR MODIFICATIONS.
- */
-#ifndef __LINUX__AIO_ABI_H
-#define __LINUX__AIO_ABI_H
-
-#include <linux/types.h>
-#include <asm/byteorder.h>
-
-typedef __kernel_ulong_t aio_context_t;
-
-enum {
-	IOCB_CMD_PREAD = 0,
-	IOCB_CMD_PWRITE = 1,
-	IOCB_CMD_FSYNC = 2,
-	IOCB_CMD_FDSYNC = 3,
-	/* These two are experimental.
-	 * IOCB_CMD_PREADX = 4,
-	 * IOCB_CMD_POLL = 5,
-	 */
-	IOCB_CMD_NOOP = 6,
-	IOCB_CMD_PREADV = 7,
-	IOCB_CMD_PWRITEV = 8,
-};
-
-/*
- * Valid flags for the "aio_flags" member of the "struct iocb".
- *
- * IOCB_FLAG_RESFD - Set if the "aio_resfd" member of the "struct iocb"
- *                   is valid.
- */
-#define IOCB_FLAG_RESFD		(1 << 0)
-
-/* read() from /dev/aio returns these structures. */
-struct io_event {
-	__u64		data;		/* the data field from the iocb */
-	__u64		obj;		/* what iocb this event came from */
-	__s64		res;		/* result code for this event */
-	__s64		res2;		/* secondary result */
-};
-
-#if defined(__LITTLE_ENDIAN)
-#define PADDED(x,y)	x, y
-#elif defined(__BIG_ENDIAN)
-#define PADDED(x,y)	y, x
-#else
-#error edit for your odd byteorder.
-#endif
-
-/*
- * we always use a 64bit off_t when communicating
- * with userland.  its up to libraries to do the
- * proper padding and aio_error abstraction
- */
-
-struct iocb {
-	/* these are internal to the kernel/libc. */
-	__u64	aio_data;	/* data to be returned in event's data */
-	__u32	PADDED(aio_key, aio_reserved1);
-				/* the kernel sets aio_key to the req # */
-
-	/* common fields */
-	__u16	aio_lio_opcode;	/* see IOCB_CMD_ above */
-	__s16	aio_reqprio;
-	__u32	aio_fildes;
-
-	__u64	aio_buf;
-	__u64	aio_nbytes;
-	__s64	aio_offset;
-
-	/* extra parameters */
-	__u64	aio_reserved2;	/* TODO: use this for a (struct sigevent *) */
-
-	/* flags for the "struct iocb" */
-	__u32	aio_flags;
-
-	/*
-	 * if the IOCB_FLAG_RESFD flag of "aio_flags" is set, this is an
-	 * eventfd to signal AIO readiness to
-	 */
-	__u32	aio_resfd;
-}; /* 64 bytes */
-
-#undef IFBIG
-#undef IFLITTLE
-
-#endif /* __LINUX__AIO_ABI_H */
-
diff --git a/ANDROID_3.4.5/include/linux/akm8975.h b/ANDROID_3.4.5/include/linux/akm8975.h
deleted file mode 100644
index 6a7c4326..00000000
--- a/ANDROID_3.4.5/include/linux/akm8975.h
+++ /dev/null
@@ -1,87 +0,0 @@
-/*
- * Definitions for akm8975 compass chip.
- */
-#ifndef AKM8975_H
-#define AKM8975_H
-
-#include <linux/ioctl.h>
-
-/*! \name AK8975 operation mode
- \anchor AK8975_Mode
- Defines an operation mode of the AK8975.*/
-/*! @{*/
-#define AK8975_MODE_SNG_MEASURE   0x01
-#define	AK8975_MODE_SELF_TEST     0x08
-#define	AK8975_MODE_FUSE_ACCESS   0x0F
-#define	AK8975_MODE_POWER_DOWN    0x00
-/*! @}*/
-
-#define RBUFF_SIZE		8	/* Rx buffer size */
-
-/*! \name AK8975 register address
-\anchor AK8975_REG
-Defines a register address of the AK8975.*/
-/*! @{*/
-#define AK8975_REG_WIA		0x00
-#define AK8975_REG_INFO		0x01
-#define AK8975_REG_ST1		0x02
-#define AK8975_REG_HXL		0x03
-#define AK8975_REG_HXH		0x04
-#define AK8975_REG_HYL		0x05
-#define AK8975_REG_HYH		0x06
-#define AK8975_REG_HZL		0x07
-#define AK8975_REG_HZH		0x08
-#define AK8975_REG_ST2		0x09
-#define AK8975_REG_CNTL		0x0A
-#define AK8975_REG_RSV		0x0B
-#define AK8975_REG_ASTC		0x0C
-#define AK8975_REG_TS1		0x0D
-#define AK8975_REG_TS2		0x0E
-#define AK8975_REG_I2CDIS	0x0F
-/*! @}*/
-
-/*! \name AK8975 fuse-rom address
-\anchor AK8975_FUSE
-Defines a read-only address of the fuse ROM of the AK8975.*/
-/*! @{*/
-#define AK8975_FUSE_ASAX	0x10
-#define AK8975_FUSE_ASAY	0x11
-#define AK8975_FUSE_ASAZ	0x12
-/*! @}*/
-
-#define AKMIO                   0xA1
-
-/* IOCTLs for AKM library */
-#define ECS_IOCTL_WRITE                 _IOW(AKMIO, 0x02, char[5])
-#define ECS_IOCTL_READ                  _IOWR(AKMIO, 0x03, char[5])
-#define ECS_IOCTL_GETDATA               _IOR(AKMIO, 0x08, char[RBUFF_SIZE])
-#define ECS_IOCTL_SET_YPR               _IOW(AKMIO, 0x0C, short[12])
-#define ECS_IOCTL_GET_OPEN_STATUS       _IOR(AKMIO, 0x0D, int)
-#define ECS_IOCTL_GET_CLOSE_STATUS      _IOR(AKMIO, 0x0E, int)
-#define ECS_IOCTL_GET_DELAY             _IOR(AKMIO, 0x30, short)
-
-/* IOCTLs for APPs */
-#define ECS_IOCTL_APP_SET_MFLAG		_IOW(AKMIO, 0x11, short)
-#define ECS_IOCTL_APP_GET_MFLAG		_IOW(AKMIO, 0x12, short)
-#define ECS_IOCTL_APP_SET_AFLAG		_IOW(AKMIO, 0x13, short)
-#define ECS_IOCTL_APP_GET_AFLAG		_IOR(AKMIO, 0x14, short)
-#define ECS_IOCTL_APP_SET_DELAY		_IOW(AKMIO, 0x18, short)
-#define ECS_IOCTL_APP_GET_DELAY		ECS_IOCTL_GET_DELAY
-/* Set raw magnetic vector flag */
-#define ECS_IOCTL_APP_SET_MVFLAG	_IOW(AKMIO, 0x19, short)
-/* Get raw magnetic vector flag */
-#define ECS_IOCTL_APP_GET_MVFLAG	_IOR(AKMIO, 0x1A, short)
-#define ECS_IOCTL_APP_SET_TFLAG         _IOR(AKMIO, 0x15, short)
-
-
-struct akm8975_platform_data {
-	int intr;
-
-	int (*init)(void);
-	void (*exit)(void);
-	int (*power_on)(void);
-	int (*power_off)(void);
-};
-
-#endif
-
diff --git a/ANDROID_3.4.5/include/linux/alarmtimer.h b/ANDROID_3.4.5/include/linux/alarmtimer.h
deleted file mode 100644
index 96c5c249..00000000
--- a/ANDROID_3.4.5/include/linux/alarmtimer.h
+++ /dev/null
@@ -1,82 +0,0 @@
-#ifndef _LINUX_ALARMTIMER_H
-#define _LINUX_ALARMTIMER_H
-
-#include <linux/time.h>
-#include <linux/hrtimer.h>
-#include <linux/timerqueue.h>
-#include <linux/rtc.h>
-
-enum alarmtimer_type {
-	ALARM_REALTIME,
-	ALARM_BOOTTIME,
-
-	ALARM_NUMTYPE,
-};
-
-enum alarmtimer_restart {
-	ALARMTIMER_NORESTART,
-	ALARMTIMER_RESTART,
-};
-
-
-#define ALARMTIMER_STATE_INACTIVE	0x00
-#define ALARMTIMER_STATE_ENQUEUED	0x01
-#define ALARMTIMER_STATE_CALLBACK	0x02
-
-/**
- * struct alarm - Alarm timer structure
- * @node:	timerqueue node for adding to the event list this value
- *		also includes the expiration time.
- * @period:	Period for recuring alarms
- * @function:	Function pointer to be executed when the timer fires.
- * @type:	Alarm type (BOOTTIME/REALTIME)
- * @enabled:	Flag that represents if the alarm is set to fire or not
- * @data:	Internal data value.
- */
-struct alarm {
-	struct timerqueue_node	node;
-	enum alarmtimer_restart	(*function)(struct alarm *, ktime_t now);
-	enum alarmtimer_type	type;
-	int			state;
-	void			*data;
-};
-
-void alarm_init(struct alarm *alarm, enum alarmtimer_type type,
-		enum alarmtimer_restart (*function)(struct alarm *, ktime_t));
-void alarm_start(struct alarm *alarm, ktime_t start);
-int alarm_try_to_cancel(struct alarm *alarm);
-int alarm_cancel(struct alarm *alarm);
-
-u64 alarm_forward(struct alarm *alarm, ktime_t now, ktime_t interval);
-
-/*
- * A alarmtimer is active, when it is enqueued into timerqueue or the
- * callback function is running.
- */
-static inline int alarmtimer_active(const struct alarm *timer)
-{
-	return timer->state != ALARMTIMER_STATE_INACTIVE;
-}
-
-/*
- * Helper function to check, whether the timer is on one of the queues
- */
-static inline int alarmtimer_is_queued(struct alarm *timer)
-{
-	return timer->state & ALARMTIMER_STATE_ENQUEUED;
-}
-
-/*
- * Helper function to check, whether the timer is running the callback
- * function
- */
-static inline int alarmtimer_callback_running(struct alarm *timer)
-{
-	return timer->state & ALARMTIMER_STATE_CALLBACK;
-}
-
-
-/* Provide way to access the rtc device being used by alarmtimers */
-struct rtc_device *alarmtimer_get_rtcdev(void);
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/altera_jtaguart.h b/ANDROID_3.4.5/include/linux/altera_jtaguart.h
deleted file mode 100644
index 953b178a..00000000
--- a/ANDROID_3.4.5/include/linux/altera_jtaguart.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- * altera_jtaguart.h -- Altera JTAG UART driver defines.
- */
-
-#ifndef	__ALTJUART_H
-#define	__ALTJUART_H
-
-#define ALTERA_JTAGUART_MAJOR	204
-#define ALTERA_JTAGUART_MINOR	186
-
-struct altera_jtaguart_platform_uart {
-	unsigned long mapbase;	/* Physical address base */
-	unsigned int irq;	/* Interrupt vector */
-};
-
-#endif /* __ALTJUART_H */
diff --git a/ANDROID_3.4.5/include/linux/altera_uart.h b/ANDROID_3.4.5/include/linux/altera_uart.h
deleted file mode 100644
index c022c82d..00000000
--- a/ANDROID_3.4.5/include/linux/altera_uart.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * altera_uart.h -- Altera UART driver defines.
- */
-
-#ifndef	__ALTUART_H
-#define	__ALTUART_H
-
-struct altera_uart_platform_uart {
-	unsigned long mapbase;	/* Physical address base */
-	unsigned int irq;	/* Interrupt vector */
-	unsigned int uartclk;	/* UART clock rate */
-	unsigned int bus_shift;	/* Bus shift (address stride) */
-};
-
-#endif /* __ALTUART_H */
diff --git a/ANDROID_3.4.5/include/linux/amba/bus.h b/ANDROID_3.4.5/include/linux/amba/bus.h
deleted file mode 100644
index 8d54f794..00000000
--- a/ANDROID_3.4.5/include/linux/amba/bus.h
+++ /dev/null
@@ -1,130 +0,0 @@
-/*
- *  linux/include/amba/bus.h
- *
- *  This device type deals with ARM PrimeCells and anything else that
- *  presents a proper CID (0xB105F00D) at the end of the I/O register
- *  region or that is derived from a PrimeCell.
- *
- *  Copyright (C) 2003 Deep Blue Solutions Ltd, All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef ASMARM_AMBA_H
-#define ASMARM_AMBA_H
-
-#include <linux/clk.h>
-#include <linux/device.h>
-#include <linux/mod_devicetable.h>
-#include <linux/err.h>
-#include <linux/resource.h>
-#include <linux/regulator/consumer.h>
-
-#define AMBA_NR_IRQS	2
-#define AMBA_CID	0xb105f00d
-
-struct clk;
-
-struct amba_device {
-	struct device		dev;
-	struct resource		res;
-	struct clk		*pclk;
-	u64			dma_mask;
-	unsigned int		periphid;
-	unsigned int		irq[AMBA_NR_IRQS];
-};
-
-struct amba_driver {
-	struct device_driver	drv;
-	int			(*probe)(struct amba_device *, const struct amba_id *);
-	int			(*remove)(struct amba_device *);
-	void			(*shutdown)(struct amba_device *);
-	int			(*suspend)(struct amba_device *, pm_message_t);
-	int			(*resume)(struct amba_device *);
-	const struct amba_id	*id_table;
-};
-
-enum amba_vendor {
-	AMBA_VENDOR_ARM = 0x41,
-	AMBA_VENDOR_ST = 0x80,
-};
-
-extern struct bus_type amba_bustype;
-
-#define to_amba_device(d)	container_of(d, struct amba_device, dev)
-
-#define amba_get_drvdata(d)	dev_get_drvdata(&d->dev)
-#define amba_set_drvdata(d,p)	dev_set_drvdata(&d->dev, p)
-
-int amba_driver_register(struct amba_driver *);
-void amba_driver_unregister(struct amba_driver *);
-struct amba_device *amba_device_alloc(const char *, resource_size_t, size_t);
-void amba_device_put(struct amba_device *);
-int amba_device_add(struct amba_device *, struct resource *);
-int amba_device_register(struct amba_device *, struct resource *);
-void amba_device_unregister(struct amba_device *);
-struct amba_device *amba_find_device(const char *, struct device *, unsigned int, unsigned int);
-int amba_request_regions(struct amba_device *, const char *);
-void amba_release_regions(struct amba_device *);
-
-#define amba_pclk_enable(d)	\
-	(IS_ERR((d)->pclk) ? 0 : clk_enable((d)->pclk))
-
-#define amba_pclk_disable(d)	\
-	do { if (!IS_ERR((d)->pclk)) clk_disable((d)->pclk); } while (0)
-
-/* Some drivers don't use the struct amba_device */
-#define AMBA_CONFIG_BITS(a) (((a) >> 24) & 0xff)
-#define AMBA_REV_BITS(a) (((a) >> 20) & 0x0f)
-#define AMBA_MANF_BITS(a) (((a) >> 12) & 0xff)
-#define AMBA_PART_BITS(a) ((a) & 0xfff)
-
-#define amba_config(d)	AMBA_CONFIG_BITS((d)->periphid)
-#define amba_rev(d)	AMBA_REV_BITS((d)->periphid)
-#define amba_manf(d)	AMBA_MANF_BITS((d)->periphid)
-#define amba_part(d)	AMBA_PART_BITS((d)->periphid)
-
-#define __AMBA_DEV(busid, data, mask)				\
-	{							\
-		.coherent_dma_mask = mask,			\
-		.init_name = busid,				\
-		.platform_data = data,				\
-	}
-
-/*
- * APB devices do not themselves have the ability to address memory,
- * so DMA masks should be zero (much like USB peripheral devices.)
- * The DMA controller DMA masks should be used instead (much like
- * USB host controllers in conventional PCs.)
- */
-#define AMBA_APB_DEVICE(name, busid, id, base, irqs, data)	\
-struct amba_device name##_device = {				\
-	.dev = __AMBA_DEV(busid, data, 0),			\
-	.res = DEFINE_RES_MEM(base, SZ_4K),			\
-	.irq = irqs,						\
-	.periphid = id,						\
-}
-
-/*
- * AHB devices are DMA capable, so set their DMA masks
- */
-#define AMBA_AHB_DEVICE(name, busid, id, base, irqs, data)	\
-struct amba_device name##_device = {				\
-	.dev = __AMBA_DEV(busid, data, ~0ULL),			\
-	.res = DEFINE_RES_MEM(base, SZ_4K),			\
-	.dma_mask = ~0ULL,					\
-	.irq = irqs,						\
-	.periphid = id,						\
-}
-
-/*
- * module_amba_driver() - Helper macro for drivers that don't do anything
- * special in module init/exit.  This eliminates a lot of boilerplate.  Each
- * module may only use this macro once, and calling it replaces module_init()
- * and module_exit()
- */
-#define module_amba_driver(__amba_drv) \
-	module_driver(__amba_drv, amba_driver_register, amba_driver_unregister)
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/amba/clcd.h b/ANDROID_3.4.5/include/linux/amba/clcd.h
deleted file mode 100644
index e82e3ee2..00000000
--- a/ANDROID_3.4.5/include/linux/amba/clcd.h
+++ /dev/null
@@ -1,330 +0,0 @@
-/*
- * linux/include/asm-arm/hardware/amba_clcd.h -- Integrator LCD panel.
- *
- * David A Rusling
- *
- * Copyright (C) 2001 ARM Limited
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file COPYING in the main directory of this archive
- * for more details.
- */
-#include <linux/fb.h>
-
-/*
- * CLCD Controller Internal Register addresses
- */
-#define CLCD_TIM0		0x00000000
-#define CLCD_TIM1 		0x00000004
-#define CLCD_TIM2 		0x00000008
-#define CLCD_TIM3 		0x0000000c
-#define CLCD_UBAS 		0x00000010
-#define CLCD_LBAS 		0x00000014
-
-#define CLCD_PL110_IENB		0x00000018
-#define CLCD_PL110_CNTL		0x0000001c
-#define CLCD_PL110_STAT		0x00000020
-#define CLCD_PL110_INTR 	0x00000024
-#define CLCD_PL110_UCUR		0x00000028
-#define CLCD_PL110_LCUR		0x0000002C
-
-#define CLCD_PL111_CNTL		0x00000018
-#define CLCD_PL111_IENB		0x0000001c
-#define CLCD_PL111_RIS		0x00000020
-#define CLCD_PL111_MIS		0x00000024
-#define CLCD_PL111_ICR		0x00000028
-#define CLCD_PL111_UCUR		0x0000002c
-#define CLCD_PL111_LCUR		0x00000030
-
-#define CLCD_PALL 		0x00000200
-#define CLCD_PALETTE		0x00000200
-
-#define TIM2_CLKSEL		(1 << 5)
-#define TIM2_IVS		(1 << 11)
-#define TIM2_IHS		(1 << 12)
-#define TIM2_IPC		(1 << 13)
-#define TIM2_IOE		(1 << 14)
-#define TIM2_BCD		(1 << 26)
-
-#define CNTL_LCDEN		(1 << 0)
-#define CNTL_LCDBPP1		(0 << 1)
-#define CNTL_LCDBPP2		(1 << 1)
-#define CNTL_LCDBPP4		(2 << 1)
-#define CNTL_LCDBPP8		(3 << 1)
-#define CNTL_LCDBPP16		(4 << 1)
-#define CNTL_LCDBPP16_565	(6 << 1)
-#define CNTL_LCDBPP16_444	(7 << 1)
-#define CNTL_LCDBPP24		(5 << 1)
-#define CNTL_LCDBW		(1 << 4)
-#define CNTL_LCDTFT		(1 << 5)
-#define CNTL_LCDMONO8		(1 << 6)
-#define CNTL_LCDDUAL		(1 << 7)
-#define CNTL_BGR		(1 << 8)
-#define CNTL_BEBO		(1 << 9)
-#define CNTL_BEPO		(1 << 10)
-#define CNTL_LCDPWR		(1 << 11)
-#define CNTL_LCDVCOMP(x)	((x) << 12)
-#define CNTL_LDMAFIFOTIME	(1 << 15)
-#define CNTL_WATERMARK		(1 << 16)
-
-enum {
-	/* individual formats */
-	CLCD_CAP_RGB444		= (1 << 0),
-	CLCD_CAP_RGB5551	= (1 << 1),
-	CLCD_CAP_RGB565		= (1 << 2),
-	CLCD_CAP_RGB888		= (1 << 3),
-	CLCD_CAP_BGR444		= (1 << 4),
-	CLCD_CAP_BGR5551	= (1 << 5),
-	CLCD_CAP_BGR565		= (1 << 6),
-	CLCD_CAP_BGR888		= (1 << 7),
-
-	/* connection layouts */
-	CLCD_CAP_444		= CLCD_CAP_RGB444 | CLCD_CAP_BGR444,
-	CLCD_CAP_5551		= CLCD_CAP_RGB5551 | CLCD_CAP_BGR5551,
-	CLCD_CAP_565		= CLCD_CAP_RGB565 | CLCD_CAP_BGR565,
-	CLCD_CAP_888		= CLCD_CAP_RGB888 | CLCD_CAP_BGR888,
-
-	/* red/blue ordering */
-	CLCD_CAP_RGB		= CLCD_CAP_RGB444 | CLCD_CAP_RGB5551 |
-				  CLCD_CAP_RGB565 | CLCD_CAP_RGB888,
-	CLCD_CAP_BGR		= CLCD_CAP_BGR444 | CLCD_CAP_BGR5551 |
-				  CLCD_CAP_BGR565 | CLCD_CAP_BGR888,
-
-	CLCD_CAP_ALL		= CLCD_CAP_BGR | CLCD_CAP_RGB,
-};
-
-struct clcd_panel {
-	struct fb_videomode	mode;
-	signed short		width;	/* width in mm */
-	signed short		height;	/* height in mm */
-	u32			tim2;
-	u32			tim3;
-	u32			cntl;
-	u32			caps;
-	unsigned int		bpp:8,
-				fixedtimings:1,
-				grayscale:1;
-	unsigned int		connector;
-};
-
-struct clcd_regs {
-	u32			tim0;
-	u32			tim1;
-	u32			tim2;
-	u32			tim3;
-	u32			cntl;
-	unsigned long		pixclock;
-};
-
-struct clcd_fb;
-
-/*
- * the board-type specific routines
- */
-struct clcd_board {
-	const char *name;
-
-	/*
-	 * Optional.  Hardware capability flags.
-	 */
-	u32	caps;
-
-	/*
-	 * Optional.  Check whether the var structure is acceptable
-	 * for this display.
-	 */
-	int	(*check)(struct clcd_fb *fb, struct fb_var_screeninfo *var);
-
-	/*
-	 * Compulsory.  Decode fb->fb.var into regs->*.  In the case of
-	 * fixed timing, set regs->* to the register values required.
-	 */
-	void	(*decode)(struct clcd_fb *fb, struct clcd_regs *regs);
-
-	/*
-	 * Optional.  Disable any extra display hardware.
-	 */
-	void	(*disable)(struct clcd_fb *);
-
-	/*
-	 * Optional.  Enable any extra display hardware.
-	 */
-	void	(*enable)(struct clcd_fb *);
-
-	/*
-	 * Setup platform specific parts of CLCD driver
-	 */
-	int	(*setup)(struct clcd_fb *);
-
-	/*
-	 * mmap the framebuffer memory
-	 */
-	int	(*mmap)(struct clcd_fb *, struct vm_area_struct *);
-
-	/*
-	 * Remove platform specific parts of CLCD driver
-	 */
-	void	(*remove)(struct clcd_fb *);
-};
-
-struct amba_device;
-struct clk;
-
-/* this data structure describes each frame buffer device we find */
-struct clcd_fb {
-	struct fb_info		fb;
-	struct amba_device	*dev;
-	struct clk		*clk;
-	struct clcd_panel	*panel;
-	struct clcd_board	*board;
-	void			*board_data;
-	void __iomem		*regs;
-	u16			off_ienb;
-	u16			off_cntl;
-	u32			clcd_cntl;
-	u32			cmap[16];
-	bool			clk_enabled;
-};
-
-static inline void clcdfb_decode(struct clcd_fb *fb, struct clcd_regs *regs)
-{
-	struct fb_var_screeninfo *var = &fb->fb.var;
-	u32 val, cpl;
-
-	/*
-	 * Program the CLCD controller registers and start the CLCD
-	 */
-	val = ((var->xres / 16) - 1) << 2;
-	val |= (var->hsync_len - 1) << 8;
-	val |= (var->right_margin - 1) << 16;
-	val |= (var->left_margin - 1) << 24;
-	regs->tim0 = val;
-
-	val = var->yres;
-	if (fb->panel->cntl & CNTL_LCDDUAL)
-		val /= 2;
-	val -= 1;
-	val |= (var->vsync_len - 1) << 10;
-	val |= var->lower_margin << 16;
-	val |= var->upper_margin << 24;
-	regs->tim1 = val;
-
-	val = fb->panel->tim2;
-	val |= var->sync & FB_SYNC_HOR_HIGH_ACT  ? 0 : TIM2_IHS;
-	val |= var->sync & FB_SYNC_VERT_HIGH_ACT ? 0 : TIM2_IVS;
-
-	cpl = var->xres_virtual;
-	if (fb->panel->cntl & CNTL_LCDTFT)	  /* TFT */
-		/* / 1 */;
-	else if (!var->grayscale)		  /* STN color */
-		cpl = cpl * 8 / 3;
-	else if (fb->panel->cntl & CNTL_LCDMONO8) /* STN monochrome, 8bit */
-		cpl /= 8;
-	else					  /* STN monochrome, 4bit */
-		cpl /= 4;
-
-	regs->tim2 = val | ((cpl - 1) << 16);
-
-	regs->tim3 = fb->panel->tim3;
-
-	val = fb->panel->cntl;
-	if (var->grayscale)
-		val |= CNTL_LCDBW;
-
-	if (fb->panel->caps && fb->board->caps &&
-	    var->bits_per_pixel >= 16) {
-		/*
-		 * if board and panel supply capabilities, we can support
-		 * changing BGR/RGB depending on supplied parameters
-		 */
-		if (var->red.offset == 0)
-			val &= ~CNTL_BGR;
-		else
-			val |= CNTL_BGR;
-	}
-
-	switch (var->bits_per_pixel) {
-	case 1:
-		val |= CNTL_LCDBPP1;
-		break;
-	case 2:
-		val |= CNTL_LCDBPP2;
-		break;
-	case 4:
-		val |= CNTL_LCDBPP4;
-		break;
-	case 8:
-		val |= CNTL_LCDBPP8;
-		break;
-	case 16:
-		/*
-		 * PL110 cannot choose between 5551 and 565 modes in its
-		 * control register.  It is possible to use 565 with
-		 * custom external wiring.
-		 */
-		if (amba_part(fb->dev) == 0x110 ||
-		    var->green.length == 5)
-			val |= CNTL_LCDBPP16;
-		else if (var->green.length == 6)
-			val |= CNTL_LCDBPP16_565;
-		else
-			val |= CNTL_LCDBPP16_444;
-		break;
-	case 32:
-		val |= CNTL_LCDBPP24;
-		break;
-	}
-
-	regs->cntl = val;
-	regs->pixclock = var->pixclock;
-}
-
-static inline int clcdfb_check(struct clcd_fb *fb, struct fb_var_screeninfo *var)
-{
-	var->xres_virtual = var->xres = (var->xres + 15) & ~15;
-	var->yres_virtual = var->yres = (var->yres + 1) & ~1;
-
-#define CHECK(e,l,h) (var->e < l || var->e > h)
-	if (CHECK(right_margin, (5+1), 256) ||	/* back porch */
-	    CHECK(left_margin, (5+1), 256) ||	/* front porch */
-	    CHECK(hsync_len, (5+1), 256) ||
-	    var->xres > 4096 ||
-	    var->lower_margin > 255 ||		/* back porch */
-	    var->upper_margin > 255 ||		/* front porch */
-	    var->vsync_len > 32 ||
-	    var->yres > 1024)
-		return -EINVAL;
-#undef CHECK
-
-	/* single panel mode: PCD = max(PCD, 1) */
-	/* dual panel mode: PCD = max(PCD, 5) */
-
-	/*
-	 * You can't change the grayscale setting, and
-	 * we can only do non-interlaced video.
-	 */
-	if (var->grayscale != fb->fb.var.grayscale ||
-	    (var->vmode & FB_VMODE_MASK) != FB_VMODE_NONINTERLACED)
-		return -EINVAL;
-
-#define CHECK(e) (var->e != fb->fb.var.e)
-	if (fb->panel->fixedtimings &&
-	    (CHECK(xres)		||
-	     CHECK(yres)		||
-	     CHECK(bits_per_pixel)	||
-	     CHECK(pixclock)		||
-	     CHECK(left_margin)		||
-	     CHECK(right_margin)	||
-	     CHECK(upper_margin)	||
-	     CHECK(lower_margin)	||
-	     CHECK(hsync_len)		||
-	     CHECK(vsync_len)		||
-	     CHECK(sync)))
-		return -EINVAL;
-#undef CHECK
-
-	var->nonstd = 0;
-	var->accel_flags = 0;
-
-	return 0;
-}
diff --git a/ANDROID_3.4.5/include/linux/amba/kmi.h b/ANDROID_3.4.5/include/linux/amba/kmi.h
deleted file mode 100644
index a39e5be7..00000000
--- a/ANDROID_3.4.5/include/linux/amba/kmi.h
+++ /dev/null
@@ -1,92 +0,0 @@
-/*
- *  linux/include/asm-arm/hardware/amba_kmi.h
- *
- *  Internal header file for AMBA KMI ports
- *
- *  Copyright (C) 2000 Deep Blue Solutions Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- *
- * ---------------------------------------------------------------------------
- *  From ARM PrimeCell(tm) PS2 Keyboard/Mouse Interface (PL050) Technical
- *  Reference Manual - ARM DDI 0143B - see http://www.arm.com/
- * ---------------------------------------------------------------------------
- */
-#ifndef ASM_ARM_HARDWARE_AMBA_KMI_H
-#define ASM_ARM_HARDWARE_AMBA_KMI_H
-
-/*
- * KMI control register:
- *  KMICR_TYPE       0 = PS2/AT mode, 1 = No line control bit mode
- *  KMICR_RXINTREN   1 = enable RX interrupts
- *  KMICR_TXINTREN   1 = enable TX interrupts
- *  KMICR_EN         1 = enable KMI
- *  KMICR_FD         1 = force KMI data low
- *  KMICR_FC         1 = force KMI clock low
- */
-#define KMICR		(KMI_BASE + 0x00)
-#define KMICR_TYPE		(1 << 5)
-#define KMICR_RXINTREN		(1 << 4)
-#define KMICR_TXINTREN		(1 << 3)
-#define KMICR_EN		(1 << 2)
-#define KMICR_FD		(1 << 1)
-#define KMICR_FC		(1 << 0)
-
-/*
- * KMI status register:
- *  KMISTAT_TXEMPTY  1 = transmitter register empty
- *  KMISTAT_TXBUSY   1 = currently sending data
- *  KMISTAT_RXFULL   1 = receiver register ready to be read
- *  KMISTAT_RXBUSY   1 = currently receiving data
- *  KMISTAT_RXPARITY parity of last databyte received
- *  KMISTAT_IC       current level of KMI clock input
- *  KMISTAT_ID       current level of KMI data input
- */
-#define KMISTAT		(KMI_BASE + 0x04)
-#define KMISTAT_TXEMPTY		(1 << 6)
-#define KMISTAT_TXBUSY		(1 << 5)
-#define KMISTAT_RXFULL		(1 << 4)
-#define KMISTAT_RXBUSY		(1 << 3)
-#define KMISTAT_RXPARITY	(1 << 2)
-#define KMISTAT_IC		(1 << 1)
-#define KMISTAT_ID		(1 << 0)
-
-/*
- * KMI data register
- */
-#define KMIDATA		(KMI_BASE + 0x08)
-
-/*
- * KMI clock divisor: to generate 8MHz internal clock
- *  div = (ref / 8MHz) - 1; 0 <= div <= 15
- */
-#define KMICLKDIV	(KMI_BASE + 0x0c)
-
-/*
- * KMI interrupt register:
- *  KMIIR_TXINTR     1 = transmit interrupt asserted
- *  KMIIR_RXINTR     1 = receive interrupt asserted
- */
-#define KMIIR		(KMI_BASE + 0x10)
-#define KMIIR_TXINTR		(1 << 1)
-#define KMIIR_RXINTR		(1 << 0)
-
-/*
- * The size of the KMI primecell
- */
-#define KMI_SIZE	(0x100)
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/amba/mmci.h b/ANDROID_3.4.5/include/linux/amba/mmci.h
deleted file mode 100644
index 9d1d9caf..00000000
--- a/ANDROID_3.4.5/include/linux/amba/mmci.h
+++ /dev/null
@@ -1,90 +0,0 @@
-/*
- *  include/linux/amba/mmci.h
- */
-#ifndef AMBA_MMCI_H
-#define AMBA_MMCI_H
-
-#include <linux/mmc/host.h>
-#include <linux/mmc/card.h>
-#include <linux/mmc/sdio_func.h>
-
-struct embedded_sdio_data {
-        struct sdio_cis cis;
-        struct sdio_cccr cccr;
-        struct sdio_embedded_func *funcs;
-        int num_funcs;
-};
-
-
-/*
- * These defines is places here due to access is needed from machine
- * configuration files. The ST Micro version does not have ROD and
- * reuse the voltage registers for direction settings.
- */
-#define MCI_ST_DATA2DIREN	(1 << 2)
-#define MCI_ST_CMDDIREN		(1 << 3)
-#define MCI_ST_DATA0DIREN	(1 << 4)
-#define MCI_ST_DATA31DIREN	(1 << 5)
-#define MCI_ST_FBCLKEN		(1 << 7)
-#define MCI_ST_DATA74DIREN	(1 << 8)
-
-/* Just some dummy forwarding */
-struct dma_chan;
-
-/**
- * struct mmci_platform_data - platform configuration for the MMCI
- * (also known as PL180) block.
- * @f_max: the maximum operational frequency for this host in this
- * platform configuration. When this is specified it takes precedence
- * over the module parameter for the same frequency.
- * @ocr_mask: available voltages on the 4 pins from the block, this
- * is ignored if a regulator is used, see the MMC_VDD_* masks in
- * mmc/host.h
- * @ios_handler: a callback function to act on specfic ios changes,
- * used for example to control a levelshifter
- * mask into a value to be binary (or set some other custom bits
- * in MMCIPWR) or:ed and written into the MMCIPWR register of the
- * block.  May also control external power based on the power_mode.
- * @status: if no GPIO read function was given to the block in
- * gpio_wp (below) this function will be called to determine
- * whether a card is present in the MMC slot or not
- * @gpio_wp: read this GPIO pin to see if the card is write protected
- * @gpio_cd: read this GPIO pin to detect card insertion
- * @cd_invert: true if the gpio_cd pin value is active low
- * @capabilities: the capabilities of the block as implemented in
- * this platform, signify anything MMC_CAP_* from mmc/host.h
- * @capabilities2: more capabilities, MMC_CAP2_* from mmc/host.h
- * @sigdir: a bit field indicating for what bits in the MMC bus the host
- * should enable signal direction indication.
- * @dma_filter: function used to select an appropriate RX and TX
- * DMA channel to be used for DMA, if and only if you're deploying the
- * generic DMA engine
- * @dma_rx_param: parameter passed to the DMA allocation
- * filter in order to select an appropriate RX channel. If
- * there is a bidirectional RX+TX channel, then just specify
- * this and leave dma_tx_param set to NULL
- * @dma_tx_param: parameter passed to the DMA allocation
- * filter in order to select an appropriate TX channel. If this
- * is NULL the driver will attempt to use the RX channel as a
- * bidirectional channel
- */
-struct mmci_platform_data {
-	unsigned int f_max;
-	unsigned int ocr_mask;
-	int (*ios_handler)(struct device *, struct mmc_ios *);
-	unsigned int (*status)(struct device *);
-	int	gpio_wp;
-	int	gpio_cd;
-	bool	cd_invert;
-	unsigned long capabilities;
-	unsigned long capabilities2;
-	u32 sigdir;
-	bool (*dma_filter)(struct dma_chan *chan, void *filter_param);
-	void *dma_rx_param;
-	void *dma_tx_param;
-	unsigned int status_irq;
-	struct embedded_sdio_data *embedded_sdio;
-	int (*register_status_notify)(void (*callback)(int card_present, void *dev_id), void *dev_id);
-};
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/amba/pl022.h b/ANDROID_3.4.5/include/linux/amba/pl022.h
deleted file mode 100644
index 76dd1b19..00000000
--- a/ANDROID_3.4.5/include/linux/amba/pl022.h
+++ /dev/null
@@ -1,300 +0,0 @@
-/*
- * include/linux/amba/pl022.h
- *
- * Copyright (C) 2008-2009 ST-Ericsson AB
- * Copyright (C) 2006 STMicroelectronics Pvt. Ltd.
- *
- * Author: Linus Walleij <linus.walleij@stericsson.com>
- *
- * Initial version inspired by:
- *	linux-2.6.17-rc3-mm1/drivers/spi/pxa2xx_spi.c
- * Initial adoption to PL022 by:
- *      Sachin Verma <sachin.verma@st.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#ifndef _SSP_PL022_H
-#define _SSP_PL022_H
-
-#include <linux/types.h>
-
-/**
- * whether SSP is in loopback mode or not
- */
-enum ssp_loopback {
-	LOOPBACK_DISABLED,
-	LOOPBACK_ENABLED
-};
-
-/**
- * enum ssp_interface - interfaces allowed for this SSP Controller
- * @SSP_INTERFACE_MOTOROLA_SPI: Motorola Interface
- * @SSP_INTERFACE_TI_SYNC_SERIAL: Texas Instrument Synchronous Serial
- * interface
- * @SSP_INTERFACE_NATIONAL_MICROWIRE: National Semiconductor Microwire
- * interface
- * @SSP_INTERFACE_UNIDIRECTIONAL: Unidirectional interface (STn8810
- * &STn8815 only)
- */
-enum ssp_interface {
-	SSP_INTERFACE_MOTOROLA_SPI,
-	SSP_INTERFACE_TI_SYNC_SERIAL,
-	SSP_INTERFACE_NATIONAL_MICROWIRE,
-	SSP_INTERFACE_UNIDIRECTIONAL
-};
-
-/**
- * enum ssp_hierarchy - whether SSP is configured as Master or Slave
- */
-enum ssp_hierarchy {
-	SSP_MASTER,
-	SSP_SLAVE
-};
-
-/**
- * enum ssp_clock_params - clock parameters, to set SSP clock at a
- * desired freq
- */
-struct ssp_clock_params {
-	u8 cpsdvsr; /* value from 2 to 254 (even only!) */
-	u8 scr;	    /* value from 0 to 255 */
-};
-
-/**
- * enum ssp_rx_endian - endianess of Rx FIFO Data
- * this feature is only available in ST versionf of PL022
- */
-enum ssp_rx_endian {
-	SSP_RX_MSB,
-	SSP_RX_LSB
-};
-
-/**
- * enum ssp_tx_endian - endianess of Tx FIFO Data
- */
-enum ssp_tx_endian {
-	SSP_TX_MSB,
-	SSP_TX_LSB
-};
-
-/**
- * enum ssp_data_size - number of bits in one data element
- */
-enum ssp_data_size {
-	SSP_DATA_BITS_4 = 0x03, SSP_DATA_BITS_5, SSP_DATA_BITS_6,
-	SSP_DATA_BITS_7, SSP_DATA_BITS_8, SSP_DATA_BITS_9,
-	SSP_DATA_BITS_10, SSP_DATA_BITS_11, SSP_DATA_BITS_12,
-	SSP_DATA_BITS_13, SSP_DATA_BITS_14, SSP_DATA_BITS_15,
-	SSP_DATA_BITS_16, SSP_DATA_BITS_17, SSP_DATA_BITS_18,
-	SSP_DATA_BITS_19, SSP_DATA_BITS_20, SSP_DATA_BITS_21,
-	SSP_DATA_BITS_22, SSP_DATA_BITS_23, SSP_DATA_BITS_24,
-	SSP_DATA_BITS_25, SSP_DATA_BITS_26, SSP_DATA_BITS_27,
-	SSP_DATA_BITS_28, SSP_DATA_BITS_29, SSP_DATA_BITS_30,
-	SSP_DATA_BITS_31, SSP_DATA_BITS_32
-};
-
-/**
- * enum ssp_mode - SSP mode of operation (Communication modes)
- */
-enum ssp_mode {
-	INTERRUPT_TRANSFER,
-	POLLING_TRANSFER,
-	DMA_TRANSFER
-};
-
-/**
- * enum ssp_rx_level_trig - receive FIFO watermark level which triggers
- * IT: Interrupt fires when _N_ or more elements in RX FIFO.
- */
-enum ssp_rx_level_trig {
-	SSP_RX_1_OR_MORE_ELEM,
-	SSP_RX_4_OR_MORE_ELEM,
-	SSP_RX_8_OR_MORE_ELEM,
-	SSP_RX_16_OR_MORE_ELEM,
-	SSP_RX_32_OR_MORE_ELEM
-};
-
-/**
- * Transmit FIFO watermark level which triggers (IT Interrupt fires
- * when _N_ or more empty locations in TX FIFO)
- */
-enum ssp_tx_level_trig {
-	SSP_TX_1_OR_MORE_EMPTY_LOC,
-	SSP_TX_4_OR_MORE_EMPTY_LOC,
-	SSP_TX_8_OR_MORE_EMPTY_LOC,
-	SSP_TX_16_OR_MORE_EMPTY_LOC,
-	SSP_TX_32_OR_MORE_EMPTY_LOC
-};
-
-/**
- * enum SPI Clock Phase - clock phase (Motorola SPI interface only)
- * @SSP_CLK_FIRST_EDGE: Receive data on first edge transition (actual direction depends on polarity)
- * @SSP_CLK_SECOND_EDGE: Receive data on second edge transition (actual direction depends on polarity)
- */
-enum ssp_spi_clk_phase {
-	SSP_CLK_FIRST_EDGE,
-	SSP_CLK_SECOND_EDGE
-};
-
-/**
- * enum SPI Clock Polarity - clock polarity (Motorola SPI interface only)
- * @SSP_CLK_POL_IDLE_LOW: Low inactive level
- * @SSP_CLK_POL_IDLE_HIGH: High inactive level
- */
-enum ssp_spi_clk_pol {
-	SSP_CLK_POL_IDLE_LOW,
-	SSP_CLK_POL_IDLE_HIGH
-};
-
-/**
- * Microwire Conrol Lengths Command size in microwire format
- */
-enum ssp_microwire_ctrl_len {
-	SSP_BITS_4 = 0x03, SSP_BITS_5, SSP_BITS_6,
-	SSP_BITS_7, SSP_BITS_8, SSP_BITS_9,
-	SSP_BITS_10, SSP_BITS_11, SSP_BITS_12,
-	SSP_BITS_13, SSP_BITS_14, SSP_BITS_15,
-	SSP_BITS_16, SSP_BITS_17, SSP_BITS_18,
-	SSP_BITS_19, SSP_BITS_20, SSP_BITS_21,
-	SSP_BITS_22, SSP_BITS_23, SSP_BITS_24,
-	SSP_BITS_25, SSP_BITS_26, SSP_BITS_27,
-	SSP_BITS_28, SSP_BITS_29, SSP_BITS_30,
-	SSP_BITS_31, SSP_BITS_32
-};
-
-/**
- * enum Microwire Wait State
- * @SSP_MWIRE_WAIT_ZERO: No wait state inserted after last command bit
- * @SSP_MWIRE_WAIT_ONE: One wait state inserted after last command bit
- */
-enum ssp_microwire_wait_state {
-	SSP_MWIRE_WAIT_ZERO,
-	SSP_MWIRE_WAIT_ONE
-};
-
-/**
- * enum ssp_duplex - whether Full/Half Duplex on microwire, only
- * available in the ST Micro variant.
- * @SSP_MICROWIRE_CHANNEL_FULL_DUPLEX: SSPTXD becomes bi-directional,
- *     SSPRXD not used
- * @SSP_MICROWIRE_CHANNEL_HALF_DUPLEX: SSPTXD is an output, SSPRXD is
- *     an input.
- */
-enum ssp_duplex {
-	SSP_MICROWIRE_CHANNEL_FULL_DUPLEX,
-	SSP_MICROWIRE_CHANNEL_HALF_DUPLEX
-};
-
-/**
- * enum ssp_clkdelay - an optional clock delay on the feedback clock
- * only available in the ST Micro PL023 variant.
- * @SSP_FEEDBACK_CLK_DELAY_NONE: no delay, the data coming in from the
- * slave is sampled directly
- * @SSP_FEEDBACK_CLK_DELAY_1T: the incoming slave data is sampled with
- * a delay of T-dt
- * @SSP_FEEDBACK_CLK_DELAY_2T: dito with a delay if 2T-dt
- * @SSP_FEEDBACK_CLK_DELAY_3T: dito with a delay if 3T-dt
- * @SSP_FEEDBACK_CLK_DELAY_4T: dito with a delay if 4T-dt
- * @SSP_FEEDBACK_CLK_DELAY_5T: dito with a delay if 5T-dt
- * @SSP_FEEDBACK_CLK_DELAY_6T: dito with a delay if 6T-dt
- * @SSP_FEEDBACK_CLK_DELAY_7T: dito with a delay if 7T-dt
- */
-enum ssp_clkdelay {
-	SSP_FEEDBACK_CLK_DELAY_NONE,
-	SSP_FEEDBACK_CLK_DELAY_1T,
-	SSP_FEEDBACK_CLK_DELAY_2T,
-	SSP_FEEDBACK_CLK_DELAY_3T,
-	SSP_FEEDBACK_CLK_DELAY_4T,
-	SSP_FEEDBACK_CLK_DELAY_5T,
-	SSP_FEEDBACK_CLK_DELAY_6T,
-	SSP_FEEDBACK_CLK_DELAY_7T
-};
-
-/**
- * CHIP select/deselect commands
- */
-enum ssp_chip_select {
-	SSP_CHIP_SELECT,
-	SSP_CHIP_DESELECT
-};
-
-
-struct dma_chan;
-/**
- * struct pl022_ssp_master - device.platform_data for SPI controller devices.
- * @num_chipselect: chipselects are used to distinguish individual
- *     SPI slaves, and are numbered from zero to num_chipselects - 1.
- *     each slave has a chipselect signal, but it's common that not
- *     every chipselect is connected to a slave.
- * @enable_dma: if true enables DMA driven transfers.
- * @dma_rx_param: parameter to locate an RX DMA channel.
- * @dma_tx_param: parameter to locate a TX DMA channel.
- * @autosuspend_delay: delay in ms following transfer completion before the
- *     runtime power management system suspends the device. A setting of 0
- *     indicates no delay and the device will be suspended immediately.
- * @rt: indicates the controller should run the message pump with realtime
- *     priority to minimise the transfer latency on the bus.
- */
-struct pl022_ssp_controller {
-	u16 bus_id;
-	u8 num_chipselect;
-	u8 enable_dma:1;
-	bool (*dma_filter)(struct dma_chan *chan, void *filter_param);
-	void *dma_rx_param;
-	void *dma_tx_param;
-	int autosuspend_delay;
-	bool rt;
-};
-
-/**
- * struct ssp_config_chip - spi_board_info.controller_data for SPI
- * slave devices, copied to spi_device.controller_data.
- *
- * @lbm: used for test purpose to internally connect RX and TX
- * @iface: Interface type(Motorola, TI, Microwire, Universal)
- * @hierarchy: sets whether interface is master or slave
- * @slave_tx_disable: SSPTXD is disconnected (in slave mode only)
- * @clk_freq: Tune freq parameters of SSP(when in master mode)
- * @endian_rx: Endianess of Data in Rx FIFO
- * @endian_tx: Endianess of Data in Tx FIFO
- * @data_size: Width of data element(4 to 32 bits)
- * @com_mode: communication mode: polling, Interrupt or DMA
- * @rx_lev_trig: Rx FIFO watermark level (for IT & DMA mode)
- * @tx_lev_trig: Tx FIFO watermark level (for IT & DMA mode)
- * @clk_phase: Motorola SPI interface Clock phase
- * @clk_pol: Motorola SPI interface Clock polarity
- * @ctrl_len: Microwire interface: Control length
- * @wait_state: Microwire interface: Wait state
- * @duplex: Microwire interface: Full/Half duplex
- * @clkdelay: on the PL023 variant, the delay in feeback clock cycles
- * before sampling the incoming line
- * @cs_control: function pointer to board-specific function to
- * assert/deassert I/O port to control HW generation of devices chip-select.
- * @dma_xfer_type: Type of DMA xfer (Mem-to-periph or Periph-to-Periph)
- * @dma_config: DMA configuration for SSP controller and peripheral
- */
-struct pl022_config_chip {
-	enum ssp_interface iface;
-	enum ssp_hierarchy hierarchy;
-	bool slave_tx_disable;
-	struct ssp_clock_params clk_freq;
-	enum ssp_mode com_mode;
-	enum ssp_rx_level_trig rx_lev_trig;
-	enum ssp_tx_level_trig tx_lev_trig;
-	enum ssp_microwire_ctrl_len ctrl_len;
-	enum ssp_microwire_wait_state wait_state;
-	enum ssp_duplex duplex;
-	enum ssp_clkdelay clkdelay;
-	void (*cs_control) (u32 control);
-};
-
-#endif /* _SSP_PL022_H */
diff --git a/ANDROID_3.4.5/include/linux/amba/pl061.h b/ANDROID_3.4.5/include/linux/amba/pl061.h
deleted file mode 100644
index fb83c045..00000000
--- a/ANDROID_3.4.5/include/linux/amba/pl061.h
+++ /dev/null
@@ -1,16 +0,0 @@
-#include <linux/types.h>
-
-/* platform data for the PL061 GPIO driver */
-
-struct pl061_platform_data {
-	/* number of the first GPIO */
-	unsigned	gpio_base;
-
-	/* number of the first IRQ.
-	 * If the IRQ functionality in not desired this must be set to 0.
-	 */
-	unsigned	irq_base;
-
-	u8		directions;	/* startup directions, 1: out, 0: in */
-	u8		values;		/* startup values */
-};
diff --git a/ANDROID_3.4.5/include/linux/amba/pl08x.h b/ANDROID_3.4.5/include/linux/amba/pl08x.h
deleted file mode 100644
index e64ce2cf..00000000
--- a/ANDROID_3.4.5/include/linux/amba/pl08x.h
+++ /dev/null
@@ -1,244 +0,0 @@
-/*
- * linux/amba/pl08x.h - ARM PrimeCell DMA Controller driver
- *
- * Copyright (C) 2005 ARM Ltd
- * Copyright (C) 2010 ST-Ericsson SA
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * pl08x information required by platform code
- *
- * Please credit ARM.com
- * Documentation: ARM DDI 0196D
- */
-
-#ifndef AMBA_PL08X_H
-#define AMBA_PL08X_H
-
-/* We need sizes of structs from this header */
-#include <linux/dmaengine.h>
-#include <linux/interrupt.h>
-
-struct pl08x_lli;
-struct pl08x_driver_data;
-
-/* Bitmasks for selecting AHB ports for DMA transfers */
-enum {
-	PL08X_AHB1 = (1 << 0),
-	PL08X_AHB2 = (1 << 1)
-};
-
-/**
- * struct pl08x_channel_data - data structure to pass info between
- * platform and PL08x driver regarding channel configuration
- * @bus_id: name of this device channel, not just a device name since
- * devices may have more than one channel e.g. "foo_tx"
- * @min_signal: the minimum DMA signal number to be muxed in for this
- * channel (for platforms supporting muxed signals). If you have
- * static assignments, make sure this is set to the assigned signal
- * number, PL08x have 16 possible signals in number 0 thru 15 so
- * when these are not enough they often get muxed (in hardware)
- * disabling simultaneous use of the same channel for two devices.
- * @max_signal: the maximum DMA signal number to be muxed in for
- * the channel. Set to the same as min_signal for
- * devices with static assignments
- * @muxval: a number usually used to poke into some mux regiser to
- * mux in the signal to this channel
- * @cctl_opt: default options for the channel control register
- * @addr: source/target address in physical memory for this DMA channel,
- * can be the address of a FIFO register for burst requests for example.
- * This can be left undefined if the PrimeCell API is used for configuring
- * this.
- * @circular_buffer: whether the buffer passed in is circular and
- * shall simply be looped round round (like a record baby round
- * round round round)
- * @single: the device connected to this channel will request single DMA
- * transfers, not bursts. (Bursts are default.)
- * @periph_buses: the device connected to this channel is accessible via
- * these buses (use PL08X_AHB1 | PL08X_AHB2).
- */
-struct pl08x_channel_data {
-	char *bus_id;
-	int min_signal;
-	int max_signal;
-	u32 muxval;
-	u32 cctl;
-	dma_addr_t addr;
-	bool circular_buffer;
-	bool single;
-	u8 periph_buses;
-};
-
-/**
- * Struct pl08x_bus_data - information of source or destination
- * busses for a transfer
- * @addr: current address
- * @maxwidth: the maximum width of a transfer on this bus
- * @buswidth: the width of this bus in bytes: 1, 2 or 4
- */
-struct pl08x_bus_data {
-	dma_addr_t addr;
-	u8 maxwidth;
-	u8 buswidth;
-};
-
-/**
- * struct pl08x_phy_chan - holder for the physical channels
- * @id: physical index to this channel
- * @lock: a lock to use when altering an instance of this struct
- * @signal: the physical signal (aka channel) serving this physical channel
- * right now
- * @serving: the virtual channel currently being served by this physical
- * channel
- */
-struct pl08x_phy_chan {
-	unsigned int id;
-	void __iomem *base;
-	spinlock_t lock;
-	int signal;
-	struct pl08x_dma_chan *serving;
-};
-
-/**
- * struct pl08x_sg - structure containing data per sg
- * @src_addr: src address of sg
- * @dst_addr: dst address of sg
- * @len: transfer len in bytes
- * @node: node for txd's dsg_list
- */
-struct pl08x_sg {
-	dma_addr_t src_addr;
-	dma_addr_t dst_addr;
-	size_t len;
-	struct list_head node;
-};
-
-/**
- * struct pl08x_txd - wrapper for struct dma_async_tx_descriptor
- * @tx: async tx descriptor
- * @node: node for txd list for channels
- * @dsg_list: list of children sg's
- * @direction: direction of transfer
- * @llis_bus: DMA memory address (physical) start for the LLIs
- * @llis_va: virtual memory address start for the LLIs
- * @cctl: control reg values for current txd
- * @ccfg: config reg values for current txd
- */
-struct pl08x_txd {
-	struct dma_async_tx_descriptor tx;
-	struct list_head node;
-	struct list_head dsg_list;
-	enum dma_transfer_direction direction;
-	dma_addr_t llis_bus;
-	struct pl08x_lli *llis_va;
-	/* Default cctl value for LLIs */
-	u32 cctl;
-	/*
-	 * Settings to be put into the physical channel when we
-	 * trigger this txd.  Other registers are in llis_va[0].
-	 */
-	u32 ccfg;
-};
-
-/**
- * struct pl08x_dma_chan_state - holds the PL08x specific virtual channel
- * states
- * @PL08X_CHAN_IDLE: the channel is idle
- * @PL08X_CHAN_RUNNING: the channel has allocated a physical transport
- * channel and is running a transfer on it
- * @PL08X_CHAN_PAUSED: the channel has allocated a physical transport
- * channel, but the transfer is currently paused
- * @PL08X_CHAN_WAITING: the channel is waiting for a physical transport
- * channel to become available (only pertains to memcpy channels)
- */
-enum pl08x_dma_chan_state {
-	PL08X_CHAN_IDLE,
-	PL08X_CHAN_RUNNING,
-	PL08X_CHAN_PAUSED,
-	PL08X_CHAN_WAITING,
-};
-
-/**
- * struct pl08x_dma_chan - this structure wraps a DMA ENGINE channel
- * @chan: wrappped abstract channel
- * @phychan: the physical channel utilized by this channel, if there is one
- * @phychan_hold: if non-zero, hold on to the physical channel even if we
- * have no pending entries
- * @tasklet: tasklet scheduled by the IRQ to handle actual work etc
- * @name: name of channel
- * @cd: channel platform data
- * @runtime_addr: address for RX/TX according to the runtime config
- * @runtime_direction: current direction of this channel according to
- * runtime config
- * @pend_list: queued transactions pending on this channel
- * @at: active transaction on this channel
- * @lock: a lock for this channel data
- * @host: a pointer to the host (internal use)
- * @state: whether the channel is idle, paused, running etc
- * @slave: whether this channel is a device (slave) or for memcpy
- * @device_fc: Flow Controller Settings for ccfg register. Only valid for slave
- * channels. Fill with 'true' if peripheral should be flow controller. Direction
- * will be selected at Runtime.
- * @waiting: a TX descriptor on this channel which is waiting for a physical
- * channel to become available
- */
-struct pl08x_dma_chan {
-	struct dma_chan chan;
-	struct pl08x_phy_chan *phychan;
-	int phychan_hold;
-	struct tasklet_struct tasklet;
-	char *name;
-	const struct pl08x_channel_data *cd;
-	dma_addr_t src_addr;
-	dma_addr_t dst_addr;
-	u32 src_cctl;
-	u32 dst_cctl;
-	enum dma_transfer_direction runtime_direction;
-	struct list_head pend_list;
-	struct pl08x_txd *at;
-	spinlock_t lock;
-	struct pl08x_driver_data *host;
-	enum pl08x_dma_chan_state state;
-	bool slave;
-	bool device_fc;
-	struct pl08x_txd *waiting;
-};
-
-/**
- * struct pl08x_platform_data - the platform configuration for the PL08x
- * PrimeCells.
- * @slave_channels: the channels defined for the different devices on the
- * platform, all inclusive, including multiplexed channels. The available
- * physical channels will be multiplexed around these signals as they are
- * requested, just enumerate all possible channels.
- * @get_signal: request a physical signal to be used for a DMA transfer
- * immediately: if there is some multiplexing or similar blocking the use
- * of the channel the transfer can be denied by returning less than zero,
- * else it returns the allocated signal number
- * @put_signal: indicate to the platform that this physical signal is not
- * running any DMA transfer and multiplexing can be recycled
- * @lli_buses: buses which LLIs can be fetched from: PL08X_AHB1 | PL08X_AHB2
- * @mem_buses: buses which memory can be accessed from: PL08X_AHB1 | PL08X_AHB2
- */
-struct pl08x_platform_data {
-	const struct pl08x_channel_data *slave_channels;
-	unsigned int num_slave_channels;
-	struct pl08x_channel_data memcpy_channel;
-	int (*get_signal)(struct pl08x_dma_chan *);
-	void (*put_signal)(struct pl08x_dma_chan *);
-	u8 lli_buses;
-	u8 mem_buses;
-};
-
-#ifdef CONFIG_AMBA_PL08X
-bool pl08x_filter_id(struct dma_chan *chan, void *chan_id);
-#else
-static inline bool pl08x_filter_id(struct dma_chan *chan, void *chan_id)
-{
-	return false;
-}
-#endif
-
-#endif	/* AMBA_PL08X_H */
diff --git a/ANDROID_3.4.5/include/linux/amba/pl093.h b/ANDROID_3.4.5/include/linux/amba/pl093.h
deleted file mode 100644
index 2983e367..00000000
--- a/ANDROID_3.4.5/include/linux/amba/pl093.h
+++ /dev/null
@@ -1,80 +0,0 @@
-/* linux/amba/pl093.h
- *
- * Copyright (c) 2008 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * AMBA PL093 SSMC (synchronous static memory controller)
- *  See DDI0236.pdf (r0p4) for more details
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#define SMB_BANK(x)	((x) * 0x20) /* each bank control set is 0x20 apart */
-
-/* Offsets for SMBxxxxRy registers */
-
-#define SMBIDCYR	(0x00)
-#define SMBWSTRDR	(0x04)
-#define SMBWSTWRR	(0x08)
-#define SMBWSTOENR	(0x0C)
-#define SMBWSTWENR	(0x10)
-#define SMBCR		(0x14)
-#define SMBSR		(0x18)
-#define SMBWSTBRDR	(0x1C)
-
-/* Masks for SMB registers */
-#define IDCY_MASK	(0xf)
-#define WSTRD_MASK	(0xf)
-#define WSTWR_MASK	(0xf)
-#define WSTOEN_MASK	(0xf)
-#define WSTWEN_MASK	(0xf)
-
-/* Notes from datasheet:
- *	WSTOEN <= WSTRD
- *	WSTWEN <= WSTWR
- *
- * WSTOEN is not used with nWAIT
- */
-
-/* SMBCR bit definitions */
-#define SMBCR_BIWRITEEN		(1 << 21)
-#define SMBCR_ADDRVALIDWRITEEN	(1 << 20)
-#define SMBCR_SYNCWRITE		(1 << 17)
-#define SMBCR_BMWRITE		(1 << 16)
-#define SMBCR_WRAPREAD		(1 << 14)
-#define SMBCR_BIREADEN		(1 << 13)
-#define SMBCR_ADDRVALIDREADEN	(1 << 12)
-#define SMBCR_SYNCREAD		(1 << 9)
-#define SMBCR_BMREAD		(1 << 8)
-#define SMBCR_SMBLSPOL		(1 << 6)
-#define SMBCR_WP		(1 << 3)
-#define SMBCR_WAITEN		(1 << 2)
-#define SMBCR_WAITPOL		(1 << 1)
-#define SMBCR_RBLE		(1 << 0)
-
-#define SMBCR_BURSTLENWRITE_MASK	(3 << 18)
-#define SMBCR_BURSTLENWRITE_4		(0 << 18)
-#define SMBCR_BURSTLENWRITE_8		(1 << 18)
-#define SMBCR_BURSTLENWRITE_RESERVED	(2 << 18)
-#define SMBCR_BURSTLENWRITE_CONTINUOUS	(3 << 18)
-
-#define SMBCR_BURSTLENREAD_MASK		(3 << 10)
-#define SMBCR_BURSTLENREAD_4		(0 << 10)
-#define SMBCR_BURSTLENREAD_8		(1 << 10)
-#define SMBCR_BURSTLENREAD_16		(2 << 10)
-#define SMBCR_BURSTLENREAD_CONTINUOUS	(3 << 10)
-
-#define SMBCR_MW_MASK			(3 << 4)
-#define SMBCR_MW_8BIT			(0 << 4)
-#define SMBCR_MW_16BIT			(1 << 4)
-#define SMBCR_MW_M32BIT			(2 << 4)
-
-/* SSMC status registers */
-#define SSMCCSR		(0x200)
-#define SSMCCR		(0x204)
-#define SSMCITCR	(0x208)
-#define SSMCITIP	(0x20C)
-#define SSMCITIOP	(0x210)
diff --git a/ANDROID_3.4.5/include/linux/amba/pl330.h b/ANDROID_3.4.5/include/linux/amba/pl330.h
deleted file mode 100644
index fe93758e..00000000
--- a/ANDROID_3.4.5/include/linux/amba/pl330.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/* linux/include/linux/amba/pl330.h
- *
- * Copyright (C) 2010 Samsung Electronics Co. Ltd.
- *	Jaswinder Singh <jassi.brar@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef	__AMBA_PL330_H_
-#define	__AMBA_PL330_H_
-
-#include <linux/dmaengine.h>
-
-struct dma_pl330_platdata {
-	/*
-	 * Number of valid peripherals connected to DMAC.
-	 * This may be different from the value read from
-	 * CR0, as the PL330 implementation might have 'holes'
-	 * in the peri list or the peri could also be reached
-	 * from another DMAC which the platform prefers.
-	 */
-	u8 nr_valid_peri;
-	/* Array of valid peripherals */
-	u8 *peri_id;
-	/* Operational capabilities */
-	dma_cap_mask_t cap_mask;
-	/* Bytes to allocate for MC buffer */
-	unsigned mcbuf_sz;
-};
-
-extern bool pl330_filter(struct dma_chan *chan, void *param);
-#endif	/* __AMBA_PL330_H_ */
diff --git a/ANDROID_3.4.5/include/linux/amba/serial.h b/ANDROID_3.4.5/include/linux/amba/serial.h
deleted file mode 100644
index d117b29d..00000000
--- a/ANDROID_3.4.5/include/linux/amba/serial.h
+++ /dev/null
@@ -1,212 +0,0 @@
-/*
- *  linux/include/asm-arm/hardware/serial_amba.h
- *
- *  Internal header file for AMBA serial ports
- *
- *  Copyright (C) ARM Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef ASM_ARM_HARDWARE_SERIAL_AMBA_H
-#define ASM_ARM_HARDWARE_SERIAL_AMBA_H
-
-#include <linux/types.h>
-
-/* -------------------------------------------------------------------------------
- *  From AMBA UART (PL010) Block Specification
- * -------------------------------------------------------------------------------
- *  UART Register Offsets.
- */
-#define UART01x_DR		0x00	/* Data read or written from the interface. */
-#define UART01x_RSR		0x04	/* Receive status register (Read). */
-#define UART01x_ECR		0x04	/* Error clear register (Write). */
-#define UART010_LCRH		0x08	/* Line control register, high byte. */
-#define ST_UART011_DMAWM	0x08    /* DMA watermark configure register. */
-#define UART010_LCRM		0x0C	/* Line control register, middle byte. */
-#define ST_UART011_TIMEOUT	0x0C    /* Timeout period register. */
-#define UART010_LCRL		0x10	/* Line control register, low byte. */
-#define UART010_CR		0x14	/* Control register. */
-#define UART01x_FR		0x18	/* Flag register (Read only). */
-#define UART010_IIR		0x1C	/* Interrupt indentification register (Read). */
-#define UART010_ICR		0x1C	/* Interrupt clear register (Write). */
-#define ST_UART011_LCRH_RX	0x1C    /* Rx line control register. */
-#define UART01x_ILPR		0x20	/* IrDA low power counter register. */
-#define UART011_IBRD		0x24	/* Integer baud rate divisor register. */
-#define UART011_FBRD		0x28	/* Fractional baud rate divisor register. */
-#define UART011_LCRH		0x2c	/* Line control register. */
-#define ST_UART011_LCRH_TX	0x2c    /* Tx Line control register. */
-#define UART011_CR		0x30	/* Control register. */
-#define UART011_IFLS		0x34	/* Interrupt fifo level select. */
-#define UART011_IMSC		0x38	/* Interrupt mask. */
-#define UART011_RIS		0x3c	/* Raw interrupt status. */
-#define UART011_MIS		0x40	/* Masked interrupt status. */
-#define UART011_ICR		0x44	/* Interrupt clear register. */
-#define UART011_DMACR		0x48	/* DMA control register. */
-#define ST_UART011_XFCR		0x50	/* XON/XOFF control register. */
-#define ST_UART011_XON1		0x54	/* XON1 register. */
-#define ST_UART011_XON2		0x58	/* XON2 register. */
-#define ST_UART011_XOFF1	0x5C	/* XON1 register. */
-#define ST_UART011_XOFF2	0x60	/* XON2 register. */
-#define ST_UART011_ITCR		0x80	/* Integration test control register. */
-#define ST_UART011_ITIP		0x84	/* Integration test input register. */
-#define ST_UART011_ABCR		0x100	/* Autobaud control register. */
-#define ST_UART011_ABIMSC	0x15C	/* Autobaud interrupt mask/clear register. */
-
-#define UART011_DR_OE		(1 << 11)
-#define UART011_DR_BE		(1 << 10)
-#define UART011_DR_PE		(1 << 9)
-#define UART011_DR_FE		(1 << 8)
-
-#define UART01x_RSR_OE 		0x08
-#define UART01x_RSR_BE 		0x04
-#define UART01x_RSR_PE 		0x02
-#define UART01x_RSR_FE 		0x01
-
-#define UART011_FR_RI		0x100
-#define UART011_FR_TXFE		0x080
-#define UART011_FR_RXFF		0x040
-#define UART01x_FR_TXFF		0x020
-#define UART01x_FR_RXFE		0x010
-#define UART01x_FR_BUSY		0x008
-#define UART01x_FR_DCD 		0x004
-#define UART01x_FR_DSR 		0x002
-#define UART01x_FR_CTS 		0x001
-#define UART01x_FR_TMSK		(UART01x_FR_TXFF + UART01x_FR_BUSY)
-
-#define UART011_CR_CTSEN	0x8000	/* CTS hardware flow control */
-#define UART011_CR_RTSEN	0x4000	/* RTS hardware flow control */
-#define UART011_CR_OUT2		0x2000	/* OUT2 */
-#define UART011_CR_OUT1		0x1000	/* OUT1 */
-#define UART011_CR_RTS		0x0800	/* RTS */
-#define UART011_CR_DTR		0x0400	/* DTR */
-#define UART011_CR_RXE		0x0200	/* receive enable */
-#define UART011_CR_TXE		0x0100	/* transmit enable */
-#define UART011_CR_LBE		0x0080	/* loopback enable */
-#define UART010_CR_RTIE		0x0040
-#define UART010_CR_TIE 		0x0020
-#define UART010_CR_RIE 		0x0010
-#define UART010_CR_MSIE		0x0008
-#define ST_UART011_CR_OVSFACT	0x0008	/* Oversampling factor */
-#define UART01x_CR_IIRLP	0x0004	/* SIR low power mode */
-#define UART01x_CR_SIREN	0x0002	/* SIR enable */
-#define UART01x_CR_UARTEN	0x0001	/* UART enable */
- 
-#define UART011_LCRH_SPS	0x80
-#define UART01x_LCRH_WLEN_8	0x60
-#define UART01x_LCRH_WLEN_7	0x40
-#define UART01x_LCRH_WLEN_6	0x20
-#define UART01x_LCRH_WLEN_5	0x00
-#define UART01x_LCRH_FEN	0x10
-#define UART01x_LCRH_STP2	0x08
-#define UART01x_LCRH_EPS	0x04
-#define UART01x_LCRH_PEN	0x02
-#define UART01x_LCRH_BRK	0x01
-
-#define ST_UART011_DMAWM_RX_1	(0 << 3)
-#define ST_UART011_DMAWM_RX_2	(1 << 3)
-#define ST_UART011_DMAWM_RX_4	(2 << 3)
-#define ST_UART011_DMAWM_RX_8	(3 << 3)
-#define ST_UART011_DMAWM_RX_16	(4 << 3)
-#define ST_UART011_DMAWM_RX_32	(5 << 3)
-#define ST_UART011_DMAWM_RX_48	(6 << 3)
-#define ST_UART011_DMAWM_TX_1	0
-#define ST_UART011_DMAWM_TX_2	1
-#define ST_UART011_DMAWM_TX_4	2
-#define ST_UART011_DMAWM_TX_8	3
-#define ST_UART011_DMAWM_TX_16	4
-#define ST_UART011_DMAWM_TX_32	5
-#define ST_UART011_DMAWM_TX_48	6
-
-#define UART010_IIR_RTIS	0x08
-#define UART010_IIR_TIS		0x04
-#define UART010_IIR_RIS		0x02
-#define UART010_IIR_MIS		0x01
-
-#define UART011_IFLS_RX1_8	(0 << 3)
-#define UART011_IFLS_RX2_8	(1 << 3)
-#define UART011_IFLS_RX4_8	(2 << 3)
-#define UART011_IFLS_RX6_8	(3 << 3)
-#define UART011_IFLS_RX7_8	(4 << 3)
-#define UART011_IFLS_TX1_8	(0 << 0)
-#define UART011_IFLS_TX2_8	(1 << 0)
-#define UART011_IFLS_TX4_8	(2 << 0)
-#define UART011_IFLS_TX6_8	(3 << 0)
-#define UART011_IFLS_TX7_8	(4 << 0)
-/* special values for ST vendor with deeper fifo */
-#define UART011_IFLS_RX_HALF	(5 << 3)
-#define UART011_IFLS_TX_HALF	(5 << 0)
-
-#define UART011_OEIM		(1 << 10)	/* overrun error interrupt mask */
-#define UART011_BEIM		(1 << 9)	/* break error interrupt mask */
-#define UART011_PEIM		(1 << 8)	/* parity error interrupt mask */
-#define UART011_FEIM		(1 << 7)	/* framing error interrupt mask */
-#define UART011_RTIM		(1 << 6)	/* receive timeout interrupt mask */
-#define UART011_TXIM		(1 << 5)	/* transmit interrupt mask */
-#define UART011_RXIM		(1 << 4)	/* receive interrupt mask */
-#define UART011_DSRMIM		(1 << 3)	/* DSR interrupt mask */
-#define UART011_DCDMIM		(1 << 2)	/* DCD interrupt mask */
-#define UART011_CTSMIM		(1 << 1)	/* CTS interrupt mask */
-#define UART011_RIMIM		(1 << 0)	/* RI interrupt mask */
-
-#define UART011_OEIS		(1 << 10)	/* overrun error interrupt status */
-#define UART011_BEIS		(1 << 9)	/* break error interrupt status */
-#define UART011_PEIS		(1 << 8)	/* parity error interrupt status */
-#define UART011_FEIS		(1 << 7)	/* framing error interrupt status */
-#define UART011_RTIS		(1 << 6)	/* receive timeout interrupt status */
-#define UART011_TXIS		(1 << 5)	/* transmit interrupt status */
-#define UART011_RXIS		(1 << 4)	/* receive interrupt status */
-#define UART011_DSRMIS		(1 << 3)	/* DSR interrupt status */
-#define UART011_DCDMIS		(1 << 2)	/* DCD interrupt status */
-#define UART011_CTSMIS		(1 << 1)	/* CTS interrupt status */
-#define UART011_RIMIS		(1 << 0)	/* RI interrupt status */
-
-#define UART011_OEIC		(1 << 10)	/* overrun error interrupt clear */
-#define UART011_BEIC		(1 << 9)	/* break error interrupt clear */
-#define UART011_PEIC		(1 << 8)	/* parity error interrupt clear */
-#define UART011_FEIC		(1 << 7)	/* framing error interrupt clear */
-#define UART011_RTIC		(1 << 6)	/* receive timeout interrupt clear */
-#define UART011_TXIC		(1 << 5)	/* transmit interrupt clear */
-#define UART011_RXIC		(1 << 4)	/* receive interrupt clear */
-#define UART011_DSRMIC		(1 << 3)	/* DSR interrupt clear */
-#define UART011_DCDMIC		(1 << 2)	/* DCD interrupt clear */
-#define UART011_CTSMIC		(1 << 1)	/* CTS interrupt clear */
-#define UART011_RIMIC		(1 << 0)	/* RI interrupt clear */
-
-#define UART011_DMAONERR	(1 << 2)	/* disable dma on error */
-#define UART011_TXDMAE		(1 << 1)	/* enable transmit dma */
-#define UART011_RXDMAE		(1 << 0)	/* enable receive dma */
-
-#define UART01x_RSR_ANY		(UART01x_RSR_OE|UART01x_RSR_BE|UART01x_RSR_PE|UART01x_RSR_FE)
-#define UART01x_FR_MODEM_ANY	(UART01x_FR_DCD|UART01x_FR_DSR|UART01x_FR_CTS)
-
-#ifndef __ASSEMBLY__
-struct amba_device; /* in uncompress this is included but amba/bus.h is not */
-struct amba_pl010_data {
-	void (*set_mctrl)(struct amba_device *dev, void __iomem *base, unsigned int mctrl);
-};
-
-struct dma_chan;
-struct amba_pl011_data {
-	bool (*dma_filter)(struct dma_chan *chan, void *filter_param);
-	void *dma_rx_param;
-	void *dma_tx_param;
-        void (*init) (void);
-	void (*exit) (void);
-	void (*reset) (void);
-};
-#endif
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/amd-iommu.h b/ANDROID_3.4.5/include/linux/amd-iommu.h
deleted file mode 100644
index 15f6b9ed..00000000
--- a/ANDROID_3.4.5/include/linux/amd-iommu.h
+++ /dev/null
@@ -1,171 +0,0 @@
-/*
- * Copyright (C) 2007-2010 Advanced Micro Devices, Inc.
- * Author: Joerg Roedel <joerg.roedel@amd.com>
- *         Leo Duran <leo.duran@amd.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
- */
-
-#ifndef _ASM_X86_AMD_IOMMU_H
-#define _ASM_X86_AMD_IOMMU_H
-
-#include <linux/types.h>
-
-#ifdef CONFIG_AMD_IOMMU
-
-struct task_struct;
-struct pci_dev;
-
-extern int amd_iommu_detect(void);
-extern int amd_iommu_init_hardware(void);
-
-/**
- * amd_iommu_enable_device_erratum() - Enable erratum workaround for device
- *				       in the IOMMUv2 driver
- * @pdev: The PCI device the workaround is necessary for
- * @erratum: The erratum workaround to enable
- *
- * The function needs to be called before amd_iommu_init_device().
- * Possible values for the erratum number are for now:
- * - AMD_PRI_DEV_ERRATUM_ENABLE_RESET - Reset PRI capability when PRI
- *					is enabled
- * - AMD_PRI_DEV_ERRATUM_LIMIT_REQ_ONE - Limit number of outstanding PRI
- *					 requests to one
- */
-#define AMD_PRI_DEV_ERRATUM_ENABLE_RESET		0
-#define AMD_PRI_DEV_ERRATUM_LIMIT_REQ_ONE		1
-
-extern void amd_iommu_enable_device_erratum(struct pci_dev *pdev, u32 erratum);
-
-/**
- * amd_iommu_init_device() - Init device for use with IOMMUv2 driver
- * @pdev: The PCI device to initialize
- * @pasids: Number of PASIDs to support for this device
- *
- * This function does all setup for the device pdev so that it can be
- * used with IOMMUv2.
- * Returns 0 on success or negative value on error.
- */
-extern int amd_iommu_init_device(struct pci_dev *pdev, int pasids);
-
-/**
- * amd_iommu_free_device() - Free all IOMMUv2 related device resources
- *			     and disable IOMMUv2 usage for this device
- * @pdev: The PCI device to disable IOMMUv2 usage for'
- */
-extern void amd_iommu_free_device(struct pci_dev *pdev);
-
-/**
- * amd_iommu_bind_pasid() - Bind a given task to a PASID on a device
- * @pdev: The PCI device to bind the task to
- * @pasid: The PASID on the device the task should be bound to
- * @task: the task to bind
- *
- * The function returns 0 on success or a negative value on error.
- */
-extern int amd_iommu_bind_pasid(struct pci_dev *pdev, int pasid,
-				struct task_struct *task);
-
-/**
- * amd_iommu_unbind_pasid() - Unbind a PASID from its task on
- *			      a device
- * @pdev: The device of the PASID
- * @pasid: The PASID to unbind
- *
- * When this function returns the device is no longer using the PASID
- * and the PASID is no longer bound to its task.
- */
-extern void amd_iommu_unbind_pasid(struct pci_dev *pdev, int pasid);
-
-/**
- * amd_iommu_set_invalid_ppr_cb() - Register a call-back for failed
- *				    PRI requests
- * @pdev: The PCI device the call-back should be registered for
- * @cb: The call-back function
- *
- * The IOMMUv2 driver invokes this call-back when it is unable to
- * successfully handle a PRI request. The device driver can then decide
- * which PRI response the device should see. Possible return values for
- * the call-back are:
- *
- * - AMD_IOMMU_INV_PRI_RSP_SUCCESS - Send SUCCESS back to the device
- * - AMD_IOMMU_INV_PRI_RSP_INVALID - Send INVALID back to the device
- * - AMD_IOMMU_INV_PRI_RSP_FAIL    - Send Failure back to the device,
- *				     the device is required to disable
- *				     PRI when it receives this response
- *
- * The function returns 0 on success or negative value on error.
- */
-#define AMD_IOMMU_INV_PRI_RSP_SUCCESS	0
-#define AMD_IOMMU_INV_PRI_RSP_INVALID	1
-#define AMD_IOMMU_INV_PRI_RSP_FAIL	2
-
-typedef int (*amd_iommu_invalid_ppr_cb)(struct pci_dev *pdev,
-					int pasid,
-					unsigned long address,
-					u16);
-
-extern int amd_iommu_set_invalid_ppr_cb(struct pci_dev *pdev,
-					amd_iommu_invalid_ppr_cb cb);
-
-/**
- * amd_iommu_device_info() - Get information about IOMMUv2 support of a
- *			     PCI device
- * @pdev: PCI device to query information from
- * @info: A pointer to an amd_iommu_device_info structure which will contain
- *	  the information about the PCI device
- *
- * Returns 0 on success, negative value on error
- */
-
-#define AMD_IOMMU_DEVICE_FLAG_ATS_SUP     0x1    /* ATS feature supported */
-#define AMD_IOMMU_DEVICE_FLAG_PRI_SUP     0x2    /* PRI feature supported */
-#define AMD_IOMMU_DEVICE_FLAG_PASID_SUP   0x4    /* PASID context supported */
-#define AMD_IOMMU_DEVICE_FLAG_EXEC_SUP    0x8    /* Device may request execution
-						    on memory pages */
-#define AMD_IOMMU_DEVICE_FLAG_PRIV_SUP   0x10    /* Device may request
-						    super-user privileges */
-
-struct amd_iommu_device_info {
-	int max_pasids;
-	u32 flags;
-};
-
-extern int amd_iommu_device_info(struct pci_dev *pdev,
-				 struct amd_iommu_device_info *info);
-
-/**
- * amd_iommu_set_invalidate_ctx_cb() - Register a call-back for invalidating
- *				       a pasid context. This call-back is
- *				       invoked when the IOMMUv2 driver needs to
- *				       invalidate a PASID context, for example
- *				       because the task that is bound to that
- *				       context is about to exit.
- *
- * @pdev: The PCI device the call-back should be registered for
- * @cb: The call-back function
- */
-
-typedef void (*amd_iommu_invalidate_ctx)(struct pci_dev *pdev, int pasid);
-
-extern int amd_iommu_set_invalidate_ctx_cb(struct pci_dev *pdev,
-					   amd_iommu_invalidate_ctx cb);
-
-#else
-
-static inline int amd_iommu_detect(void) { return -ENODEV; }
-
-#endif
-
-#endif /* _ASM_X86_AMD_IOMMU_H */
diff --git a/ANDROID_3.4.5/include/linux/amifd.h b/ANDROID_3.4.5/include/linux/amifd.h
deleted file mode 100644
index 34699326..00000000
--- a/ANDROID_3.4.5/include/linux/amifd.h
+++ /dev/null
@@ -1,62 +0,0 @@
-#ifndef _AMIFD_H
-#define _AMIFD_H
-
-/* Definitions for the Amiga floppy driver */
-
-#include <linux/fd.h>
-
-#define FD_MAX_UNITS    4	/* Max. Number of drives */
-#define FLOPPY_MAX_SECTORS	22	/* Max. Number of sectors per track */
-
-#ifndef ASSEMBLER
-
-struct fd_data_type {
-    char *name;			/* description of data type */
-    int sects;			/* sectors per track */
-#ifdef __STDC__
-    int (*read_fkt)(int);
-    void (*write_fkt)(int);
-#else
-    int (*read_fkt)();		/* read whole track */
-    void (*write_fkt)();		/* write whole track */
-#endif
-};
-
-/*
-** Floppy type descriptions
-*/
-
-struct fd_drive_type {
-    unsigned long code;		/* code returned from drive */
-    char *name;			/* description of drive */
-    unsigned int tracks;	/* number of tracks */
-    unsigned int heads;		/* number of heads */
-    unsigned int read_size;	/* raw read size for one track */
-    unsigned int write_size;	/* raw write size for one track */
-    unsigned int sect_mult;	/* sectors and gap multiplier (HD = 2) */
-    unsigned int precomp1;	/* start track for precomp 1 */
-    unsigned int precomp2;	/* start track for precomp 2 */
-    unsigned int step_delay;	/* time (in ms) for delay after step */
-    unsigned int settle_time;	/* time to settle after dir change */
-    unsigned int side_time;	/* time needed to change sides */
-};
-
-struct amiga_floppy_struct {
-    struct fd_drive_type *type;	/* type of floppy for this unit */
-    struct fd_data_type *dtype;	/* type of floppy for this unit */
-    int track;			/* current track (-1 == unknown) */
-    unsigned char *trackbuf;    /* current track (kmaloc()'d */
-
-    int blocks;			/* total # blocks on disk */
-
-    int changed;		/* true when not known */
-    int disk;			/* disk in drive (-1 == unknown) */
-    int motor;			/* true when motor is at speed */
-    int busy;			/* true when drive is active */
-    int dirty;			/* true when trackbuf is not on disk */
-    int status;			/* current error code for unit */
-    struct gendisk *gendisk;
-};
-#endif
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/amifdreg.h b/ANDROID_3.4.5/include/linux/amifdreg.h
deleted file mode 100644
index 76188bf4..00000000
--- a/ANDROID_3.4.5/include/linux/amifdreg.h
+++ /dev/null
@@ -1,81 +0,0 @@
-#ifndef _LINUX_AMIFDREG_H
-#define _LINUX_AMIFDREG_H
-
-/*
-** CIAAPRA bits (read only)
-*/
-
-#define DSKRDY      (0x1<<5)        /* disk ready when low */
-#define DSKTRACK0   (0x1<<4)        /* head at track zero when low */
-#define DSKPROT     (0x1<<3)        /* disk protected when low */
-#define DSKCHANGE   (0x1<<2)        /* low when disk removed */
-
-/*
-** CIAAPRB bits (read/write)
-*/
-
-#define DSKMOTOR    (0x1<<7)        /* motor on when low */
-#define DSKSEL3     (0x1<<6)        /* select drive 3 when low */
-#define DSKSEL2     (0x1<<5)        /* select drive 2 when low */
-#define DSKSEL1     (0x1<<4)        /* select drive 1 when low */
-#define DSKSEL0     (0x1<<3)        /* select drive 0 when low */
-#define DSKSIDE     (0x1<<2)        /* side selection: 0 = upper, 1 = lower */
-#define DSKDIREC    (0x1<<1)        /* step direction: 0=in, 1=out (to trk 0) */
-#define DSKSTEP     (0x1)           /* pulse low to step head 1 track */
-
-/*
-** DSKBYTR bits (read only)
-*/
-
-#define DSKBYT      (1<<15)         /* register contains valid byte when set */
-#define DMAON       (1<<14)         /* disk DMA enabled */
-#define DISKWRITE   (1<<13)         /* disk write bit in DSKLEN enabled */
-#define WORDEQUAL   (1<<12)         /* DSKSYNC register match when true */
-/* bits 7-0 are data */
-
-/*
-** ADKCON/ADKCONR bits
-*/
-
-#ifndef SETCLR
-#define ADK_SETCLR      (1<<15)     /* control bit */
-#endif
-#define ADK_PRECOMP1    (1<<14)     /* precompensation selection */
-#define ADK_PRECOMP0    (1<<13)     /* 00=none, 01=140ns, 10=280ns, 11=500ns */
-#define ADK_MFMPREC     (1<<12)     /* 0=GCR precomp., 1=MFM precomp. */
-#define ADK_WORDSYNC    (1<<10)     /* enable DSKSYNC auto DMA */
-#define ADK_MSBSYNC     (1<<9)      /* when 1, enable sync on MSbit (for GCR) */
-#define ADK_FAST        (1<<8)      /* bit cell: 0=2us (GCR), 1=1us (MFM) */
- 
-/*
-** DSKLEN bits
-*/
-
-#define DSKLEN_DMAEN    (1<<15)
-#define DSKLEN_WRITE    (1<<14)
-
-/*
-** INTENA/INTREQ bits
-*/
-
-#define DSKINDEX    (0x1<<4)        /* DSKINDEX bit */
-
-/*
-** Misc
-*/
- 
-#define MFM_SYNC    0x4489          /* standard MFM sync value */
-
-/* Values for FD_COMMAND */
-#define FD_RECALIBRATE		0x07	/* move to track 0 */
-#define FD_SEEK			0x0F	/* seek track */
-#define FD_READ			0xE6	/* read with MT, MFM, SKip deleted */
-#define FD_WRITE		0xC5	/* write with MT, MFM */
-#define FD_SENSEI		0x08	/* Sense Interrupt Status */
-#define FD_SPECIFY		0x03	/* specify HUT etc */
-#define FD_FORMAT		0x4D	/* format one track */
-#define FD_VERSION		0x10	/* get version code */
-#define FD_CONFIGURE		0x13	/* configure FIFO operation */
-#define FD_PERPENDICULAR	0x12	/* perpendicular r/w mode */
-
-#endif /* _LINUX_AMIFDREG_H */
diff --git a/ANDROID_3.4.5/include/linux/amigaffs.h b/ANDROID_3.4.5/include/linux/amigaffs.h
deleted file mode 100644
index 43b41c06..00000000
--- a/ANDROID_3.4.5/include/linux/amigaffs.h
+++ /dev/null
@@ -1,144 +0,0 @@
-#ifndef AMIGAFFS_H
-#define AMIGAFFS_H
-
-#include <linux/types.h>
-#include <asm/byteorder.h>
-
-#define FS_OFS		0x444F5300
-#define FS_FFS		0x444F5301
-#define FS_INTLOFS	0x444F5302
-#define FS_INTLFFS	0x444F5303
-#define FS_DCOFS	0x444F5304
-#define FS_DCFFS	0x444F5305
-#define MUFS_FS		0x6d754653   /* 'muFS' */
-#define MUFS_OFS	0x6d754600   /* 'muF\0' */
-#define MUFS_FFS	0x6d754601   /* 'muF\1' */
-#define MUFS_INTLOFS	0x6d754602   /* 'muF\2' */
-#define MUFS_INTLFFS	0x6d754603   /* 'muF\3' */
-#define MUFS_DCOFS	0x6d754604   /* 'muF\4' */
-#define MUFS_DCFFS	0x6d754605   /* 'muF\5' */
-
-#define T_SHORT		2
-#define T_LIST		16
-#define T_DATA		8
-
-#define ST_LINKFILE	-4
-#define ST_FILE		-3
-#define ST_ROOT		1
-#define ST_USERDIR	2
-#define ST_SOFTLINK	3
-#define ST_LINKDIR	4
-
-#define AFFS_ROOT_BMAPS		25
-
-struct affs_date {
-	__be32 days;
-	__be32 mins;
-	__be32 ticks;
-};
-
-struct affs_short_date {
-	__be16 days;
-	__be16 mins;
-	__be16 ticks;
-};
-
-struct affs_root_head {
-	__be32 ptype;
-	__be32 spare1;
-	__be32 spare2;
-	__be32 hash_size;
-	__be32 spare3;
-	__be32 checksum;
-	__be32 hashtable[1];
-};
-
-struct affs_root_tail {
-	__be32 bm_flag;
-	__be32 bm_blk[AFFS_ROOT_BMAPS];
-	__be32 bm_ext;
-	struct affs_date root_change;
-	u8 disk_name[32];
-	__be32 spare1;
-	__be32 spare2;
-	struct affs_date disk_change;
-	struct affs_date disk_create;
-	__be32 spare3;
-	__be32 spare4;
-	__be32 dcache;
-	__be32 stype;
-};
-
-struct affs_head {
-	__be32 ptype;
-	__be32 key;
-	__be32 block_count;
-	__be32 spare1;
-	__be32 first_data;
-	__be32 checksum;
-	__be32 table[1];
-};
-
-struct affs_tail {
-	__be32 spare1;
-	__be16 uid;
-	__be16 gid;
-	__be32 protect;
-	__be32 size;
-	u8 comment[92];
-	struct affs_date change;
-	u8 name[32];
-	__be32 spare2;
-	__be32 original;
-	__be32 link_chain;
-	__be32 spare[5];
-	__be32 hash_chain;
-	__be32 parent;
-	__be32 extension;
-	__be32 stype;
-};
-
-struct slink_front
-{
-	__be32 ptype;
-	__be32 key;
-	__be32 spare1[3];
-	__be32 checksum;
-	u8 symname[1];	/* depends on block size */
-};
-
-struct affs_data_head
-{
-	__be32 ptype;
-	__be32 key;
-	__be32 sequence;
-	__be32 size;
-	__be32 next;
-	__be32 checksum;
-	u8 data[1];	/* depends on block size */
-};
-
-/* Permission bits */
-
-#define FIBF_OTR_READ		0x8000
-#define FIBF_OTR_WRITE		0x4000
-#define FIBF_OTR_EXECUTE	0x2000
-#define FIBF_OTR_DELETE		0x1000
-#define FIBF_GRP_READ		0x0800
-#define FIBF_GRP_WRITE		0x0400
-#define FIBF_GRP_EXECUTE	0x0200
-#define FIBF_GRP_DELETE		0x0100
-
-#define FIBF_HIDDEN		0x0080
-#define FIBF_SCRIPT		0x0040
-#define FIBF_PURE		0x0020		/* no use under linux */
-#define FIBF_ARCHIVED		0x0010		/* never set, always cleared on write */
-#define FIBF_NOREAD		0x0008		/* 0 means allowed */
-#define FIBF_NOWRITE		0x0004		/* 0 means allowed */
-#define FIBF_NOEXECUTE		0x0002		/* 0 means allowed, ignored under linux */
-#define FIBF_NODELETE		0x0001		/* 0 means allowed */
-
-#define FIBF_OWNER		0x000F		/* Bits pertaining to owner */
-#define FIBF_MASK		0xEE0E		/* Bits modified by Linux */
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/android_aid.h b/ANDROID_3.4.5/include/linux/android_aid.h
deleted file mode 100644
index 0f904b3b..00000000
--- a/ANDROID_3.4.5/include/linux/android_aid.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/* include/linux/android_aid.h
- *
- * Copyright (C) 2008 Google, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef _LINUX_ANDROID_AID_H
-#define _LINUX_ANDROID_AID_H
-
-/* AIDs that the kernel treats differently */
-#define AID_NET_BT_ADMIN 3001
-#define AID_NET_BT       3002
-#define AID_INET         3003
-#define AID_NET_RAW      3004
-#define AID_NET_ADMIN    3005
-#define AID_NET_BW_STATS 3006  /* read bandwidth statistics */
-#define AID_NET_BW_ACCT  3007  /* change bandwidth statistics accounting */
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/anon_inodes.h b/ANDROID_3.4.5/include/linux/anon_inodes.h
deleted file mode 100644
index 8013a452..00000000
--- a/ANDROID_3.4.5/include/linux/anon_inodes.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- *  include/linux/anon_inodes.h
- *
- *  Copyright (C) 2007  Davide Libenzi <davidel@xmailserver.org>
- *
- */
-
-#ifndef _LINUX_ANON_INODES_H
-#define _LINUX_ANON_INODES_H
-
-struct file_operations;
-
-struct file *anon_inode_getfile(const char *name,
-				const struct file_operations *fops,
-				void *priv, int flags);
-int anon_inode_getfd(const char *name, const struct file_operations *fops,
-		     void *priv, int flags);
-
-#endif /* _LINUX_ANON_INODES_H */
-
diff --git a/ANDROID_3.4.5/include/linux/apm-emulation.h b/ANDROID_3.4.5/include/linux/apm-emulation.h
deleted file mode 100644
index e6d80035..00000000
--- a/ANDROID_3.4.5/include/linux/apm-emulation.h
+++ /dev/null
@@ -1,62 +0,0 @@
-/* -*- linux-c -*-
- *
- * (C) 2003 zecke@handhelds.org
- *
- * GPL version 2
- *
- * based on arch/arm/kernel/apm.c
- * factor out the information needed by architectures to provide
- * apm status
- */
-#ifndef __LINUX_APM_EMULATION_H
-#define __LINUX_APM_EMULATION_H
-
-#include <linux/apm_bios.h>
-
-/*
- * This structure gets filled in by the machine specific 'get_power_status'
- * implementation.  Any fields which are not set default to a safe value.
- */
-struct apm_power_info {
-	unsigned char	ac_line_status;
-#define APM_AC_OFFLINE			0
-#define APM_AC_ONLINE			1
-#define APM_AC_BACKUP			2
-#define APM_AC_UNKNOWN			0xff
-
-	unsigned char	battery_status;
-#define APM_BATTERY_STATUS_HIGH		0
-#define APM_BATTERY_STATUS_LOW		1
-#define APM_BATTERY_STATUS_CRITICAL	2
-#define APM_BATTERY_STATUS_CHARGING	3
-#define APM_BATTERY_STATUS_NOT_PRESENT	4
-#define APM_BATTERY_STATUS_UNKNOWN	0xff
-
-	unsigned char	battery_flag;
-#define APM_BATTERY_FLAG_HIGH		(1 << 0)
-#define APM_BATTERY_FLAG_LOW		(1 << 1)
-#define APM_BATTERY_FLAG_CRITICAL	(1 << 2)
-#define APM_BATTERY_FLAG_CHARGING	(1 << 3)
-#define APM_BATTERY_FLAG_NOT_PRESENT	(1 << 7)
-#define APM_BATTERY_FLAG_UNKNOWN	0xff
-
-	int		battery_life;
-	int		time;
-	int		units;
-#define APM_UNITS_MINS			0
-#define APM_UNITS_SECS			1
-#define APM_UNITS_UNKNOWN		-1
-
-};
-
-/*
- * This allows machines to provide their own "apm get power status" function.
- */
-extern void (*apm_get_power_status)(struct apm_power_info *);
-
-/*
- * Queue an event (APM_SYS_SUSPEND or APM_CRITICAL_SUSPEND)
- */
-void apm_queue_event(apm_event_t event);
-
-#endif /* __LINUX_APM_EMULATION_H */
diff --git a/ANDROID_3.4.5/include/linux/apm_bios.h b/ANDROID_3.4.5/include/linux/apm_bios.h
deleted file mode 100644
index 01a6244c..00000000
--- a/ANDROID_3.4.5/include/linux/apm_bios.h
+++ /dev/null
@@ -1,220 +0,0 @@
-#ifndef _LINUX_APM_H
-#define _LINUX_APM_H
-
-/*
- * Include file for the interface to an APM BIOS
- * Copyright 1994-2001 Stephen Rothwell (sfr@canb.auug.org.au)
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2, or (at your option) any
- * later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- */
-
-#include <linux/types.h>
-
-typedef unsigned short	apm_event_t;
-typedef unsigned short	apm_eventinfo_t;
-
-struct apm_bios_info {
-	__u16	version;
-	__u16	cseg;
-	__u32	offset;
-	__u16	cseg_16;
-	__u16	dseg;
-	__u16	flags;
-	__u16	cseg_len;
-	__u16	cseg_16_len;
-	__u16	dseg_len;
-};
-
-#ifdef __KERNEL__
-
-#define APM_CS		(GDT_ENTRY_APMBIOS_BASE * 8)
-#define APM_CS_16	(APM_CS + 8)
-#define APM_DS		(APM_CS_16 + 8)
-
-/* Results of APM Installation Check */
-#define APM_16_BIT_SUPPORT	0x0001
-#define APM_32_BIT_SUPPORT	0x0002
-#define APM_IDLE_SLOWS_CLOCK	0x0004
-#define APM_BIOS_DISABLED      	0x0008
-#define APM_BIOS_DISENGAGED     0x0010
-
-/*
- * Data for APM that is persistent across module unload/load
- */
-struct apm_info {
-	struct apm_bios_info	bios;
-	unsigned short		connection_version;
-	int			get_power_status_broken;
-	int			get_power_status_swabinminutes;
-	int			allow_ints;
-	int			forbid_idle;
-	int			realmode_power_off;
-	int			disabled;
-};
-
-/*
- * The APM function codes
- */
-#define	APM_FUNC_INST_CHECK	0x5300
-#define	APM_FUNC_REAL_CONN	0x5301
-#define	APM_FUNC_16BIT_CONN	0x5302
-#define	APM_FUNC_32BIT_CONN	0x5303
-#define	APM_FUNC_DISCONN	0x5304
-#define	APM_FUNC_IDLE		0x5305
-#define	APM_FUNC_BUSY		0x5306
-#define	APM_FUNC_SET_STATE	0x5307
-#define	APM_FUNC_ENABLE_PM	0x5308
-#define	APM_FUNC_RESTORE_BIOS	0x5309
-#define	APM_FUNC_GET_STATUS	0x530a
-#define	APM_FUNC_GET_EVENT	0x530b
-#define	APM_FUNC_GET_STATE	0x530c
-#define	APM_FUNC_ENABLE_DEV_PM	0x530d
-#define	APM_FUNC_VERSION	0x530e
-#define	APM_FUNC_ENGAGE_PM	0x530f
-#define	APM_FUNC_GET_CAP	0x5310
-#define	APM_FUNC_RESUME_TIMER	0x5311
-#define	APM_FUNC_RESUME_ON_RING	0x5312
-#define	APM_FUNC_TIMER		0x5313
-
-/*
- * Function code for APM_FUNC_RESUME_TIMER
- */
-#define	APM_FUNC_DISABLE_TIMER	0
-#define	APM_FUNC_GET_TIMER	1
-#define	APM_FUNC_SET_TIMER	2
-
-/*
- * Function code for APM_FUNC_RESUME_ON_RING
- */
-#define	APM_FUNC_DISABLE_RING	0
-#define	APM_FUNC_ENABLE_RING	1
-#define	APM_FUNC_GET_RING	2
-
-/*
- * Function code for APM_FUNC_TIMER_STATUS
- */
-#define	APM_FUNC_TIMER_DISABLE	0
-#define	APM_FUNC_TIMER_ENABLE	1
-#define	APM_FUNC_TIMER_GET	2
-
-/*
- * in arch/i386/kernel/setup.c
- */
-extern struct apm_info	apm_info;
-
-#endif	/* __KERNEL__ */
-
-/*
- * Power states
- */
-#define APM_STATE_READY		0x0000
-#define APM_STATE_STANDBY	0x0001
-#define APM_STATE_SUSPEND	0x0002
-#define APM_STATE_OFF		0x0003
-#define APM_STATE_BUSY		0x0004
-#define APM_STATE_REJECT	0x0005
-#define APM_STATE_OEM_SYS	0x0020
-#define APM_STATE_OEM_DEV	0x0040
-
-#define APM_STATE_DISABLE	0x0000
-#define APM_STATE_ENABLE	0x0001
-
-#define APM_STATE_DISENGAGE	0x0000
-#define APM_STATE_ENGAGE	0x0001
-
-/*
- * Events (results of Get PM Event)
- */
-#define APM_SYS_STANDBY		0x0001
-#define APM_SYS_SUSPEND		0x0002
-#define APM_NORMAL_RESUME	0x0003
-#define APM_CRITICAL_RESUME	0x0004
-#define APM_LOW_BATTERY		0x0005
-#define APM_POWER_STATUS_CHANGE	0x0006
-#define APM_UPDATE_TIME		0x0007
-#define APM_CRITICAL_SUSPEND	0x0008
-#define APM_USER_STANDBY	0x0009
-#define APM_USER_SUSPEND	0x000a
-#define APM_STANDBY_RESUME	0x000b
-#define APM_CAPABILITY_CHANGE	0x000c
-
-/*
- * Error codes
- */
-#define APM_SUCCESS		0x00
-#define APM_DISABLED		0x01
-#define APM_CONNECTED		0x02
-#define APM_NOT_CONNECTED	0x03
-#define APM_16_CONNECTED	0x05
-#define APM_16_UNSUPPORTED	0x06
-#define APM_32_CONNECTED	0x07
-#define APM_32_UNSUPPORTED	0x08
-#define APM_BAD_DEVICE		0x09
-#define APM_BAD_PARAM		0x0a
-#define APM_NOT_ENGAGED		0x0b
-#define APM_BAD_FUNCTION	0x0c
-#define APM_RESUME_DISABLED	0x0d
-#define APM_NO_ERROR		0x53
-#define APM_BAD_STATE		0x60
-#define APM_NO_EVENTS		0x80
-#define APM_NOT_PRESENT		0x86
-
-/*
- * APM Device IDs
- */
-#define APM_DEVICE_BIOS		0x0000
-#define APM_DEVICE_ALL		0x0001
-#define APM_DEVICE_DISPLAY	0x0100
-#define APM_DEVICE_STORAGE	0x0200
-#define APM_DEVICE_PARALLEL	0x0300
-#define APM_DEVICE_SERIAL	0x0400
-#define APM_DEVICE_NETWORK	0x0500
-#define APM_DEVICE_PCMCIA	0x0600
-#define APM_DEVICE_BATTERY	0x8000
-#define APM_DEVICE_OEM		0xe000
-#define APM_DEVICE_OLD_ALL	0xffff
-#define APM_DEVICE_CLASS	0x00ff
-#define APM_DEVICE_MASK		0xff00
-
-#ifdef __KERNEL__
-/*
- * This is the "All Devices" ID communicated to the BIOS
- */
-#define APM_DEVICE_BALL		((apm_info.connection_version > 0x0100) ? \
-				 APM_DEVICE_ALL : APM_DEVICE_OLD_ALL)
-#endif
-
-/*
- * Battery status
- */
-#define APM_MAX_BATTERIES	2
-
-/*
- * APM defined capability bit flags
- */
-#define APM_CAP_GLOBAL_STANDBY		0x0001
-#define APM_CAP_GLOBAL_SUSPEND		0x0002
-#define APM_CAP_RESUME_STANDBY_TIMER	0x0004 /* Timer resume from standby */
-#define APM_CAP_RESUME_SUSPEND_TIMER	0x0008 /* Timer resume from suspend */
-#define APM_CAP_RESUME_STANDBY_RING	0x0010 /* Resume on Ring fr standby */
-#define APM_CAP_RESUME_SUSPEND_RING	0x0020 /* Resume on Ring fr suspend */
-#define APM_CAP_RESUME_STANDBY_PCMCIA	0x0040 /* Resume on PCMCIA Ring	*/
-#define APM_CAP_RESUME_SUSPEND_PCMCIA	0x0080 /* Resume on PCMCIA Ring	*/
-
-/*
- * ioctl operations
- */
-#include <linux/ioctl.h>
-
-#define APM_IOC_STANDBY		_IO('A', 1)
-#define APM_IOC_SUSPEND		_IO('A', 2)
-
-#endif	/* LINUX_APM_H */
diff --git a/ANDROID_3.4.5/include/linux/apple_bl.h b/ANDROID_3.4.5/include/linux/apple_bl.h
deleted file mode 100644
index 47bedc0e..00000000
--- a/ANDROID_3.4.5/include/linux/apple_bl.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * apple_bl exported symbols
- */
-
-#ifndef _LINUX_APPLE_BL_H
-#define _LINUX_APPLE_BL_H
-
-#ifdef CONFIG_BACKLIGHT_APPLE
-
-extern int apple_bl_register(void);
-extern void apple_bl_unregister(void);
-
-#else /* !CONFIG_BACKLIGHT_APPLE */
-
-static inline int apple_bl_register(void)
-{
-	return 0;
-}
-
-static inline void apple_bl_unregister(void)
-{
-}
-
-#endif /* !CONFIG_BACKLIGHT_APPLE */
-
-#endif /* _LINUX_APPLE_BL_H */
diff --git a/ANDROID_3.4.5/include/linux/arcdevice.h b/ANDROID_3.4.5/include/linux/arcdevice.h
deleted file mode 100644
index 7216b0da..00000000
--- a/ANDROID_3.4.5/include/linux/arcdevice.h
+++ /dev/null
@@ -1,346 +0,0 @@
-/*
- * INET         An implementation of the TCP/IP protocol suite for the LINUX
- *              operating system.  NET  is implemented using the  BSD Socket
- *              interface as the means of communication with the user level.
- *
- *              Definitions used by the ARCnet driver.
- *
- * Authors:     Avery Pennarun and David Woodhouse
- *
- *              This program is free software; you can redistribute it and/or
- *              modify it under the terms of the GNU General Public License
- *              as published by the Free Software Foundation; either version
- *              2 of the License, or (at your option) any later version.
- *
- */
-#ifndef _LINUX_ARCDEVICE_H
-#define _LINUX_ARCDEVICE_H
-
-#include <asm/timex.h>
-#include <linux/if_arcnet.h>
-
-#ifdef __KERNEL__
-#include  <linux/irqreturn.h>
-
-#ifndef bool
-#define bool int
-#endif
-
-/*
- * RECON_THRESHOLD is the maximum number of RECON messages to receive
- * within one minute before printing a "cabling problem" warning. The
- * default value should be fine.
- *
- * After that, a "cabling restored" message will be printed on the next IRQ
- * if no RECON messages have been received for 10 seconds.
- *
- * Do not define RECON_THRESHOLD at all if you want to disable this feature.
- */
-#define RECON_THRESHOLD 30
-
-
-/*
- * Define this to the minimum "timeout" value.  If a transmit takes longer
- * than TX_TIMEOUT jiffies, Linux will abort the TX and retry.  On a large
- * network, or one with heavy network traffic, this timeout may need to be
- * increased.  The larger it is, though, the longer it will be between
- * necessary transmits - don't set this too high.
- */
-#define TX_TIMEOUT (HZ * 200 / 1000)
-
-
-/* Display warnings about the driver being an ALPHA version. */
-#undef ALPHA_WARNING
-
-
-/*
- * Debugging bitflags: each option can be enabled individually.
- * 
- * Note: only debug flags included in the ARCNET_DEBUG_MAX define will
- *   actually be available.  GCC will (at least, GCC 2.7.0 will) notice
- *   lines using a BUGLVL not in ARCNET_DEBUG_MAX and automatically optimize
- *   them out.
- */
-#define D_NORMAL	1	/* important operational info             */
-#define D_EXTRA		2	/* useful, but non-vital information      */
-#define	D_INIT		4	/* show init/probe messages               */
-#define D_INIT_REASONS	8	/* show reasons for discarding probes     */
-#define D_RECON		32	/* print a message whenever token is lost */
-#define D_PROTO		64	/* debug auto-protocol support            */
-/* debug levels below give LOTS of output during normal operation! */
-#define D_DURING	128	/* trace operations (including irq's)     */
-#define D_TX	        256	/* show tx packets                        */
-#define D_RX		512	/* show rx packets                        */
-#define D_SKB		1024	/* show skb's                             */
-#define D_SKB_SIZE	2048	/* show skb sizes			  */
-#define D_TIMING	4096	/* show time needed to copy buffers to card */
-#define D_DEBUG         8192    /* Very detailed debug line for line */
-
-#ifndef ARCNET_DEBUG_MAX
-#define ARCNET_DEBUG_MAX (127)	/* change to ~0 if you want detailed debugging */
-#endif
-
-#ifndef ARCNET_DEBUG
-#define ARCNET_DEBUG (D_NORMAL|D_EXTRA)
-#endif
-extern int arcnet_debug;
-
-/* macros to simplify debug checking */
-#define BUGLVL(x) if ((ARCNET_DEBUG_MAX)&arcnet_debug&(x))
-#define BUGMSG2(x,msg,args...) do { BUGLVL(x) printk(msg, ## args); } while (0)
-#define BUGMSG(x,msg,args...) \
-	BUGMSG2(x, "%s%6s: " msg, \
-            x==D_NORMAL	? KERN_WARNING \
-            		: x < D_DURING ? KERN_INFO : KERN_DEBUG, \
-	    dev->name , ## args)
-
-/* see how long a function call takes to run, expressed in CPU cycles */
-#define TIME(name, bytes, call) BUGLVL(D_TIMING) { \
-	    unsigned long _x, _y; \
-	    _x = get_cycles(); \
-	    call; \
-	    _y = get_cycles(); \
-	    BUGMSG(D_TIMING, \
-	       "%s: %d bytes in %lu cycles == " \
-	       "%lu Kbytes/100Mcycle\n",\
-		   name, bytes, _y - _x, \
-		   100000000 / 1024 * bytes / (_y - _x + 1));\
-	} \
-	else { \
-		    call;\
-	}
-
-
-/*
- * Time needed to reset the card - in ms (milliseconds).  This works on my
- * SMC PC100.  I can't find a reference that tells me just how long I
- * should wait.
- */
-#define RESETtime (300)
-
-/*
- * These are the max/min lengths of packet payload, not including the
- * arc_hardware header, but definitely including the soft header.
- *
- * Note: packet sizes 254, 255, 256 are impossible because of the way
- * ARCnet registers work  That's why RFC1201 defines "exception" packets.
- * In non-RFC1201 protocols, we have to just tack some extra bytes on the
- * end.
- */
-#define MTU	253		/* normal packet max size */
-#define MinTU	257		/* extended packet min size */
-#define XMTU	508		/* extended packet max size */
-
-/* status/interrupt mask bit fields */
-#define TXFREEflag	0x01	/* transmitter available */
-#define TXACKflag       0x02	/* transmitted msg. ackd */
-#define RECONflag       0x04	/* network reconfigured */
-#define TESTflag        0x08	/* test flag */
-#define EXCNAKflag      0x08    /* excesive nak flag */
-#define RESETflag       0x10	/* power-on-reset */
-#define RES1flag        0x20	/* reserved - usually set by jumper */
-#define RES2flag        0x40	/* reserved - usually set by jumper */
-#define NORXflag        0x80	/* receiver inhibited */
-
-/* Flags used for IO-mapped memory operations */
-#define AUTOINCflag     0x40	/* Increase location with each access */
-#define IOMAPflag       0x02	/* (for 90xx) Use IO mapped memory, not mmap */
-#define ENABLE16flag    0x80	/* (for 90xx) Enable 16-bit mode */
-
-/* in the command register, the following bits have these meanings:
- *                0-2     command
- *                3-4     page number (for enable rcv/xmt command)
- *                 7      receive broadcasts
- */
-#define NOTXcmd         0x01	/* disable transmitter */
-#define NORXcmd         0x02	/* disable receiver */
-#define TXcmd           0x03	/* enable transmitter */
-#define RXcmd           0x04	/* enable receiver */
-#define CONFIGcmd       0x05	/* define configuration */
-#define CFLAGScmd       0x06	/* clear flags */
-#define TESTcmd         0x07	/* load test flags */
-
-/* flags for "clear flags" command */
-#define RESETclear      0x08	/* power-on-reset */
-#define CONFIGclear     0x10	/* system reconfigured */
-
-#define EXCNAKclear     0x0E    /* Clear and acknowledge the excive nak bit */
-
-/* flags for "load test flags" command */
-#define TESTload        0x08	/* test flag (diagnostic) */
-
-/* byte deposited into first address of buffers on reset */
-#define TESTvalue       0321	/* that's octal for 0xD1 :) */
-
-/* for "enable receiver" command */
-#define RXbcasts        0x80	/* receive broadcasts */
-
-/* flags for "define configuration" command */
-#define NORMALconf      0x00	/* 1-249 byte packets */
-#define EXTconf         0x08	/* 250-504 byte packets */
-
-/* card feature flags, set during auto-detection.
- * (currently only used by com20020pci)
- */
-#define ARC_IS_5MBIT    1   /* card default speed is 5MBit */
-#define ARC_CAN_10MBIT  2   /* card uses COM20022, supporting 10MBit,
-				 but default is 2.5MBit. */
-
-
-/* information needed to define an encapsulation driver */
-struct ArcProto {
-	char suffix;		/* a for RFC1201, e for ether-encap, etc. */
-	int mtu;		/* largest possible packet */
-	int is_ip;              /* This is a ip plugin - not a raw thing */
-
-	void (*rx) (struct net_device * dev, int bufnum,
-		    struct archdr * pkthdr, int length);
-	int (*build_header) (struct sk_buff * skb, struct net_device *dev,
-			     unsigned short ethproto, uint8_t daddr);
-
-	/* these functions return '1' if the skb can now be freed */
-	int (*prepare_tx) (struct net_device * dev, struct archdr * pkt, int length,
-			   int bufnum);
-	int (*continue_tx) (struct net_device * dev, int bufnum);
-	int (*ack_tx) (struct net_device * dev, int acked);
-};
-
-extern struct ArcProto *arc_proto_map[256], *arc_proto_default,
-	*arc_bcast_proto, *arc_raw_proto;
-
-
-/*
- * "Incoming" is information needed for each address that could be sending
- * to us.  Mostly for partially-received split packets.
- */
-struct Incoming {
-	struct sk_buff *skb;	/* packet data buffer             */
-	__be16 sequence;	/* sequence number of assembly    */
-	uint8_t lastpacket,	/* number of last packet (from 1) */
-		numpackets;	/* number of packets in split     */
-};
-
-
-/* only needed for RFC1201 */
-struct Outgoing {
-	struct ArcProto *proto;	/* protocol driver that owns this:
-				 *   if NULL, no packet is pending.
-				 */
-	struct sk_buff *skb;	/* buffer from upper levels */
-	struct archdr *pkt;	/* a pointer into the skb */
-	uint16_t length,	/* bytes total */
-		dataleft,	/* bytes left */
-		segnum,		/* segment being sent */
-		numsegs;	/* number of segments */
-};
-
-
-struct arcnet_local {
-	uint8_t config,		/* current value of CONFIG register */
-		timeout,	/* Extended timeout for COM20020 */
-		backplane,	/* Backplane flag for COM20020 */
-		clockp,		/* COM20020 clock divider */
-		clockm,		/* COM20020 clock multiplier flag */
-		setup,		/* Contents of setup1 register */
-		setup2,		/* Contents of setup2 register */
-		intmask;	/* current value of INTMASK register */
-	uint8_t default_proto[256];	/* default encap to use for each host */
-	int	cur_tx,		/* buffer used by current transmit, or -1 */
-		next_tx,	/* buffer where a packet is ready to send */
-		cur_rx;		/* current receive buffer */
-	int	lastload_dest,	/* can last loaded packet be acked? */
-		lasttrans_dest;	/* can last TX'd packet be acked? */
-	int	timed_out;	/* need to process TX timeout and drop packet */
-	unsigned long last_timeout;	/* time of last reported timeout */
-	char *card_name;	/* card ident string */
-	int card_flags;		/* special card features */
-
-
-	/* On preemtive and SMB a lock is needed */
-	spinlock_t lock;
-
-	/*
-	 * Buffer management: an ARCnet card has 4 x 512-byte buffers, each of
-	 * which can be used for either sending or receiving.  The new dynamic
-	 * buffer management routines use a simple circular queue of available
-	 * buffers, and take them as they're needed.  This way, we simplify
-	 * situations in which we (for example) want to pre-load a transmit
-	 * buffer, or start receiving while we copy a received packet to
-	 * memory.
-	 * 
-	 * The rules: only the interrupt handler is allowed to _add_ buffers to
-	 * the queue; thus, this doesn't require a lock.  Both the interrupt
-	 * handler and the transmit function will want to _remove_ buffers, so
-	 * we need to handle the situation where they try to do it at the same
-	 * time.
-	 * 
-	 * If next_buf == first_free_buf, the queue is empty.  Since there are
-	 * only four possible buffers, the queue should never be full.
-	 */
-	atomic_t buf_lock;
-	int buf_queue[5];
-	int next_buf, first_free_buf;
-
-	/* network "reconfiguration" handling */
-	unsigned long first_recon; /* time of "first" RECON message to count */
-	unsigned long last_recon;  /* time of most recent RECON */
-	int num_recons;		/* number of RECONs between first and last. */
-	bool network_down;	/* do we think the network is down? */
-
-	bool excnak_pending;    /* We just got an excesive nak interrupt */
-
-	struct {
-		uint16_t sequence;	/* sequence number (incs with each packet) */
-		__be16 aborted_seq;
-
-		struct Incoming incoming[256];	/* one from each address */
-	} rfc1201;
-
-	/* really only used by rfc1201, but we'll pretend it's not */
-	struct Outgoing outgoing;	/* packet currently being sent */
-
-	/* hardware-specific functions */
-	struct {
-		struct module *owner;
-		void (*command) (struct net_device * dev, int cmd);
-		int (*status) (struct net_device * dev);
-		void (*intmask) (struct net_device * dev, int mask);
-		bool (*reset) (struct net_device * dev, bool really_reset);
-		void (*open) (struct net_device * dev);
-		void (*close) (struct net_device * dev);
-
-		void (*copy_to_card) (struct net_device * dev, int bufnum, int offset,
-				      void *buf, int count);
-		void (*copy_from_card) (struct net_device * dev, int bufnum, int offset,
-					void *buf, int count);
-	} hw;
-
-	void __iomem *mem_start;	/* pointer to ioremap'ed MMIO */
-};
-
-
-#define ARCRESET(x)  (lp->hw.reset(dev, (x)))
-#define ACOMMAND(x)  (lp->hw.command(dev, (x)))
-#define ASTATUS()    (lp->hw.status(dev))
-#define AINTMASK(x)  (lp->hw.intmask(dev, (x)))
-
-
-
-#if ARCNET_DEBUG_MAX & D_SKB
-void arcnet_dump_skb(struct net_device *dev, struct sk_buff *skb, char *desc);
-#else
-#define arcnet_dump_skb(dev,skb,desc) ;
-#endif
-
-void arcnet_unregister_proto(struct ArcProto *proto);
-irqreturn_t arcnet_interrupt(int irq, void *dev_id);
-struct net_device *alloc_arcdev(const char *name);
-
-int arcnet_open(struct net_device *dev);
-int arcnet_close(struct net_device *dev);
-netdev_tx_t arcnet_send_packet(struct sk_buff *skb,
-				     struct net_device *dev);
-void arcnet_timeout(struct net_device *dev);
-
-#endif				/* __KERNEL__ */
-#endif				/* _LINUX_ARCDEVICE_H */
diff --git a/ANDROID_3.4.5/include/linux/arcfb.h b/ANDROID_3.4.5/include/linux/arcfb.h
deleted file mode 100644
index 721e7654..00000000
--- a/ANDROID_3.4.5/include/linux/arcfb.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef __LINUX_ARCFB_H__
-#define __LINUX_ARCFB_H__
-
-#define FBIO_WAITEVENT		_IO('F', 0x88)
-#define FBIO_GETCONTROL2	_IOR('F', 0x89, size_t)
-
-#endif
-
diff --git a/ANDROID_3.4.5/include/linux/async.h b/ANDROID_3.4.5/include/linux/async.h
deleted file mode 100644
index 68a95301..00000000
--- a/ANDROID_3.4.5/include/linux/async.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * async.h: Asynchronous function calls for boot performance
- *
- * (C) Copyright 2009 Intel Corporation
- * Author: Arjan van de Ven <arjan@linux.intel.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; version 2
- * of the License.
- */
-
-#include <linux/types.h>
-#include <linux/list.h>
-
-typedef u64 async_cookie_t;
-typedef void (async_func_ptr) (void *data, async_cookie_t cookie);
-
-extern async_cookie_t async_schedule(async_func_ptr *ptr, void *data);
-extern async_cookie_t async_schedule_domain(async_func_ptr *ptr, void *data,
-					    struct list_head *list);
-extern void async_synchronize_full(void);
-extern void async_synchronize_full_domain(struct list_head *list);
-extern void async_synchronize_cookie(async_cookie_t cookie);
-extern void async_synchronize_cookie_domain(async_cookie_t cookie,
-					    struct list_head *list);
-
diff --git a/ANDROID_3.4.5/include/linux/async_tx.h b/ANDROID_3.4.5/include/linux/async_tx.h
deleted file mode 100644
index a1c486a8..00000000
--- a/ANDROID_3.4.5/include/linux/async_tx.h
+++ /dev/null
@@ -1,209 +0,0 @@
-/*
- * Copyright © 2006, Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- *
- */
-#ifndef _ASYNC_TX_H_
-#define _ASYNC_TX_H_
-#include <linux/dmaengine.h>
-#include <linux/spinlock.h>
-#include <linux/interrupt.h>
-
-/* on architectures without dma-mapping capabilities we need to ensure
- * that the asynchronous path compiles away
- */
-#ifdef CONFIG_HAS_DMA
-#define __async_inline
-#else
-#define __async_inline __always_inline
-#endif
-
-/**
- * dma_chan_ref - object used to manage dma channels received from the
- *   dmaengine core.
- * @chan - the channel being tracked
- * @node - node for the channel to be placed on async_tx_master_list
- * @rcu - for list_del_rcu
- * @count - number of times this channel is listed in the pool
- *	(for channels with multiple capabiities)
- */
-struct dma_chan_ref {
-	struct dma_chan *chan;
-	struct list_head node;
-	struct rcu_head rcu;
-	atomic_t count;
-};
-
-/**
- * async_tx_flags - modifiers for the async_* calls
- * @ASYNC_TX_XOR_ZERO_DST: this flag must be used for xor operations where the
- * the destination address is not a source.  The asynchronous case handles this
- * implicitly, the synchronous case needs to zero the destination block.
- * @ASYNC_TX_XOR_DROP_DST: this flag must be used if the destination address is
- * also one of the source addresses.  In the synchronous case the destination
- * address is an implied source, whereas the asynchronous case it must be listed
- * as a source.  The destination address must be the first address in the source
- * array.
- * @ASYNC_TX_ACK: immediately ack the descriptor, precludes setting up a
- * dependency chain
- * @ASYNC_TX_FENCE: specify that the next operation in the dependency
- * chain uses this operation's result as an input
- */
-enum async_tx_flags {
-	ASYNC_TX_XOR_ZERO_DST	 = (1 << 0),
-	ASYNC_TX_XOR_DROP_DST	 = (1 << 1),
-	ASYNC_TX_ACK		 = (1 << 2),
-	ASYNC_TX_FENCE		 = (1 << 3),
-};
-
-/**
- * struct async_submit_ctl - async_tx submission/completion modifiers
- * @flags: submission modifiers
- * @depend_tx: parent dependency of the current operation being submitted
- * @cb_fn: callback routine to run at operation completion
- * @cb_param: parameter for the callback routine
- * @scribble: caller provided space for dma/page address conversions
- */
-struct async_submit_ctl {
-	enum async_tx_flags flags;
-	struct dma_async_tx_descriptor *depend_tx;
-	dma_async_tx_callback cb_fn;
-	void *cb_param;
-	void *scribble;
-};
-
-#ifdef CONFIG_DMA_ENGINE
-#define async_tx_issue_pending_all dma_issue_pending_all
-
-/**
- * async_tx_issue_pending - send pending descriptor to the hardware channel
- * @tx: descriptor handle to retrieve hardware context
- *
- * Note: any dependent operations will have already been issued by
- * async_tx_channel_switch, or (in the case of no channel switch) will
- * be already pending on this channel.
- */
-static inline void async_tx_issue_pending(struct dma_async_tx_descriptor *tx)
-{
-	if (likely(tx)) {
-		struct dma_chan *chan = tx->chan;
-		struct dma_device *dma = chan->device;
-
-		dma->device_issue_pending(chan);
-	}
-}
-#ifdef CONFIG_ARCH_HAS_ASYNC_TX_FIND_CHANNEL
-#include <asm/async_tx.h>
-#else
-#define async_tx_find_channel(dep, type, dst, dst_count, src, src_count, len) \
-	 __async_tx_find_channel(dep, type)
-struct dma_chan *
-__async_tx_find_channel(struct async_submit_ctl *submit,
-			enum dma_transaction_type tx_type);
-#endif /* CONFIG_ARCH_HAS_ASYNC_TX_FIND_CHANNEL */
-#else
-static inline void async_tx_issue_pending_all(void)
-{
-	do { } while (0);
-}
-
-static inline void async_tx_issue_pending(struct dma_async_tx_descriptor *tx)
-{
-	do { } while (0);
-}
-
-static inline struct dma_chan *
-async_tx_find_channel(struct async_submit_ctl *submit,
-		      enum dma_transaction_type tx_type, struct page **dst,
-		      int dst_count, struct page **src, int src_count,
-		      size_t len)
-{
-	return NULL;
-}
-#endif
-
-/**
- * async_tx_sync_epilog - actions to take if an operation is run synchronously
- * @cb_fn: function to call when the transaction completes
- * @cb_fn_param: parameter to pass to the callback routine
- */
-static inline void
-async_tx_sync_epilog(struct async_submit_ctl *submit)
-{
-	if (submit->cb_fn)
-		submit->cb_fn(submit->cb_param);
-}
-
-typedef union {
-	unsigned long addr;
-	struct page *page;
-	dma_addr_t dma;
-} addr_conv_t;
-
-static inline void
-init_async_submit(struct async_submit_ctl *args, enum async_tx_flags flags,
-		  struct dma_async_tx_descriptor *tx,
-		  dma_async_tx_callback cb_fn, void *cb_param,
-		  addr_conv_t *scribble)
-{
-	args->flags = flags;
-	args->depend_tx = tx;
-	args->cb_fn = cb_fn;
-	args->cb_param = cb_param;
-	args->scribble = scribble;
-}
-
-void async_tx_submit(struct dma_chan *chan, struct dma_async_tx_descriptor *tx,
-		     struct async_submit_ctl *submit);
-
-struct dma_async_tx_descriptor *
-async_xor(struct page *dest, struct page **src_list, unsigned int offset,
-	  int src_cnt, size_t len, struct async_submit_ctl *submit);
-
-struct dma_async_tx_descriptor *
-async_xor_val(struct page *dest, struct page **src_list, unsigned int offset,
-	      int src_cnt, size_t len, enum sum_check_flags *result,
-	      struct async_submit_ctl *submit);
-
-struct dma_async_tx_descriptor *
-async_memcpy(struct page *dest, struct page *src, unsigned int dest_offset,
-	     unsigned int src_offset, size_t len,
-	     struct async_submit_ctl *submit);
-
-struct dma_async_tx_descriptor *
-async_memset(struct page *dest, int val, unsigned int offset,
-	     size_t len, struct async_submit_ctl *submit);
-
-struct dma_async_tx_descriptor *async_trigger_callback(struct async_submit_ctl *submit);
-
-struct dma_async_tx_descriptor *
-async_gen_syndrome(struct page **blocks, unsigned int offset, int src_cnt,
-		   size_t len, struct async_submit_ctl *submit);
-
-struct dma_async_tx_descriptor *
-async_syndrome_val(struct page **blocks, unsigned int offset, int src_cnt,
-		   size_t len, enum sum_check_flags *pqres, struct page *spare,
-		   struct async_submit_ctl *submit);
-
-struct dma_async_tx_descriptor *
-async_raid6_2data_recov(int src_num, size_t bytes, int faila, int failb,
-			struct page **ptrs, struct async_submit_ctl *submit);
-
-struct dma_async_tx_descriptor *
-async_raid6_datap_recov(int src_num, size_t bytes, int faila,
-			struct page **ptrs, struct async_submit_ctl *submit);
-
-void async_tx_quiesce(struct dma_async_tx_descriptor **tx);
-#endif /* _ASYNC_TX_H_ */
diff --git a/ANDROID_3.4.5/include/linux/ata.h b/ANDROID_3.4.5/include/linux/ata.h
deleted file mode 100644
index 32df2b6e..00000000
--- a/ANDROID_3.4.5/include/linux/ata.h
+++ /dev/null
@@ -1,1078 +0,0 @@
-
-/*
- *  Copyright 2003-2004 Red Hat, Inc.  All rights reserved.
- *  Copyright 2003-2004 Jeff Garzik
- *
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2, or (at your option)
- *  any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; see the file COPYING.  If not, write to
- *  the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- *
- *  libata documentation is available via 'make {ps|pdf}docs',
- *  as Documentation/DocBook/libata.*
- *
- *  Hardware documentation available from http://www.t13.org/
- *
- */
-
-#ifndef __LINUX_ATA_H__
-#define __LINUX_ATA_H__
-
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/types.h>
-#include <asm/byteorder.h>
-
-/* defines only for the constants which don't work well as enums */
-#define ATA_DMA_BOUNDARY	0xffffUL
-#define ATA_DMA_MASK		0xffffffffULL
-
-enum {
-	/* various global constants */
-	ATA_MAX_DEVICES		= 2,	/* per bus/port */
-	ATA_MAX_PRD		= 256,	/* we could make these 256/256 */
-	ATA_SECT_SIZE		= 512,
-	ATA_MAX_SECTORS_128	= 128,
-	ATA_MAX_SECTORS		= 256,
-	ATA_MAX_SECTORS_LBA48	= 65535,/* TODO: 65536? */
-	ATA_MAX_SECTORS_TAPE	= 65535,
-
-	ATA_ID_WORDS		= 256,
-	ATA_ID_CONFIG		= 0,
-	ATA_ID_CYLS		= 1,
-	ATA_ID_HEADS		= 3,
-	ATA_ID_SECTORS		= 6,
-	ATA_ID_SERNO		= 10,
-	ATA_ID_BUF_SIZE		= 21,
-	ATA_ID_FW_REV		= 23,
-	ATA_ID_PROD		= 27,
-	ATA_ID_MAX_MULTSECT	= 47,
-	ATA_ID_DWORD_IO		= 48,
-	ATA_ID_CAPABILITY	= 49,
-	ATA_ID_OLD_PIO_MODES	= 51,
-	ATA_ID_OLD_DMA_MODES	= 52,
-	ATA_ID_FIELD_VALID	= 53,
-	ATA_ID_CUR_CYLS		= 54,
-	ATA_ID_CUR_HEADS	= 55,
-	ATA_ID_CUR_SECTORS	= 56,
-	ATA_ID_MULTSECT		= 59,
-	ATA_ID_LBA_CAPACITY	= 60,
-	ATA_ID_SWDMA_MODES	= 62,
-	ATA_ID_MWDMA_MODES	= 63,
-	ATA_ID_PIO_MODES	= 64,
-	ATA_ID_EIDE_DMA_MIN	= 65,
-	ATA_ID_EIDE_DMA_TIME	= 66,
-	ATA_ID_EIDE_PIO		= 67,
-	ATA_ID_EIDE_PIO_IORDY	= 68,
-	ATA_ID_ADDITIONAL_SUPP	= 69,
-	ATA_ID_QUEUE_DEPTH	= 75,
-	ATA_ID_MAJOR_VER	= 80,
-	ATA_ID_COMMAND_SET_1	= 82,
-	ATA_ID_COMMAND_SET_2	= 83,
-	ATA_ID_CFSSE		= 84,
-	ATA_ID_CFS_ENABLE_1	= 85,
-	ATA_ID_CFS_ENABLE_2	= 86,
-	ATA_ID_CSF_DEFAULT	= 87,
-	ATA_ID_UDMA_MODES	= 88,
-	ATA_ID_HW_CONFIG	= 93,
-	ATA_ID_SPG		= 98,
-	ATA_ID_LBA_CAPACITY_2	= 100,
-	ATA_ID_SECTOR_SIZE	= 106,
-	ATA_ID_WWN		= 108,
-	ATA_ID_LOGICAL_SECTOR_SIZE	= 117,	/* and 118 */
-	ATA_ID_LAST_LUN		= 126,
-	ATA_ID_DLF		= 128,
-	ATA_ID_CSFO		= 129,
-	ATA_ID_CFA_POWER	= 160,
-	ATA_ID_CFA_KEY_MGMT	= 162,
-	ATA_ID_CFA_MODES	= 163,
-	ATA_ID_DATA_SET_MGMT	= 169,
-	ATA_ID_ROT_SPEED	= 217,
-	ATA_ID_PIO4		= (1 << 1),
-
-	ATA_ID_SERNO_LEN	= 20,
-	ATA_ID_FW_REV_LEN	= 8,
-	ATA_ID_PROD_LEN		= 40,
-	ATA_ID_WWN_LEN		= 8,
-
-	ATA_PCI_CTL_OFS		= 2,
-
-	ATA_PIO0		= (1 << 0),
-	ATA_PIO1		= ATA_PIO0 | (1 << 1),
-	ATA_PIO2		= ATA_PIO1 | (1 << 2),
-	ATA_PIO3		= ATA_PIO2 | (1 << 3),
-	ATA_PIO4		= ATA_PIO3 | (1 << 4),
-	ATA_PIO5		= ATA_PIO4 | (1 << 5),
-	ATA_PIO6		= ATA_PIO5 | (1 << 6),
-
-	ATA_PIO4_ONLY		= (1 << 4),
-
-	ATA_SWDMA0		= (1 << 0),
-	ATA_SWDMA1		= ATA_SWDMA0 | (1 << 1),
-	ATA_SWDMA2		= ATA_SWDMA1 | (1 << 2),
-
-	ATA_SWDMA2_ONLY		= (1 << 2),
-
-	ATA_MWDMA0		= (1 << 0),
-	ATA_MWDMA1		= ATA_MWDMA0 | (1 << 1),
-	ATA_MWDMA2		= ATA_MWDMA1 | (1 << 2),
-	ATA_MWDMA3		= ATA_MWDMA2 | (1 << 3),
-	ATA_MWDMA4		= ATA_MWDMA3 | (1 << 4),
-
-	ATA_MWDMA12_ONLY	= (1 << 1) | (1 << 2),
-	ATA_MWDMA2_ONLY		= (1 << 2),
-
-	ATA_UDMA0		= (1 << 0),
-	ATA_UDMA1		= ATA_UDMA0 | (1 << 1),
-	ATA_UDMA2		= ATA_UDMA1 | (1 << 2),
-	ATA_UDMA3		= ATA_UDMA2 | (1 << 3),
-	ATA_UDMA4		= ATA_UDMA3 | (1 << 4),
-	ATA_UDMA5		= ATA_UDMA4 | (1 << 5),
-	ATA_UDMA6		= ATA_UDMA5 | (1 << 6),
-	ATA_UDMA7		= ATA_UDMA6 | (1 << 7),
-	/* ATA_UDMA7 is just for completeness... doesn't exist (yet?).  */
-
-	ATA_UDMA24_ONLY		= (1 << 2) | (1 << 4),
-
-	ATA_UDMA_MASK_40C	= ATA_UDMA2,	/* udma0-2 */
-
-	/* DMA-related */
-	ATA_PRD_SZ		= 8,
-	ATA_PRD_TBL_SZ		= (ATA_MAX_PRD * ATA_PRD_SZ),
-	ATA_PRD_EOT		= (1 << 31),	/* end-of-table flag */
-
-	ATA_DMA_TABLE_OFS	= 4,
-	ATA_DMA_STATUS		= 2,
-	ATA_DMA_CMD		= 0,
-	ATA_DMA_WR		= (1 << 3),
-	ATA_DMA_START		= (1 << 0),
-	ATA_DMA_INTR		= (1 << 2),
-	ATA_DMA_ERR		= (1 << 1),
-	ATA_DMA_ACTIVE		= (1 << 0),
-
-	/* bits in ATA command block registers */
-	ATA_HOB			= (1 << 7),	/* LBA48 selector */
-	ATA_NIEN		= (1 << 1),	/* disable-irq flag */
-	ATA_LBA			= (1 << 6),	/* LBA28 selector */
-	ATA_DEV1		= (1 << 4),	/* Select Device 1 (slave) */
-	ATA_DEVICE_OBS		= (1 << 7) | (1 << 5), /* obs bits in dev reg */
-	ATA_DEVCTL_OBS		= (1 << 3),	/* obsolete bit in devctl reg */
-	ATA_BUSY		= (1 << 7),	/* BSY status bit */
-	ATA_DRDY		= (1 << 6),	/* device ready */
-	ATA_DF			= (1 << 5),	/* device fault */
-	ATA_DSC			= (1 << 4),	/* drive seek complete */
-	ATA_DRQ			= (1 << 3),	/* data request i/o */
-	ATA_CORR		= (1 << 2),	/* corrected data error */
-	ATA_IDX			= (1 << 1),	/* index */
-	ATA_ERR			= (1 << 0),	/* have an error */
-	ATA_SRST		= (1 << 2),	/* software reset */
-	ATA_ICRC		= (1 << 7),	/* interface CRC error */
-	ATA_BBK			= ATA_ICRC,	/* pre-EIDE: block marked bad */
-	ATA_UNC			= (1 << 6),	/* uncorrectable media error */
-	ATA_MC			= (1 << 5),	/* media changed */
-	ATA_IDNF		= (1 << 4),	/* ID not found */
-	ATA_MCR			= (1 << 3),	/* media change requested */
-	ATA_ABORTED		= (1 << 2),	/* command aborted */
-	ATA_TRK0NF		= (1 << 1),	/* track 0 not found */
-	ATA_AMNF		= (1 << 0),	/* address mark not found */
-	ATAPI_LFS		= 0xF0,		/* last failed sense */
-	ATAPI_EOM		= ATA_TRK0NF,	/* end of media */
-	ATAPI_ILI		= ATA_AMNF,	/* illegal length indication */
-	ATAPI_IO		= (1 << 1),
-	ATAPI_COD		= (1 << 0),
-
-	/* ATA command block registers */
-	ATA_REG_DATA		= 0x00,
-	ATA_REG_ERR		= 0x01,
-	ATA_REG_NSECT		= 0x02,
-	ATA_REG_LBAL		= 0x03,
-	ATA_REG_LBAM		= 0x04,
-	ATA_REG_LBAH		= 0x05,
-	ATA_REG_DEVICE		= 0x06,
-	ATA_REG_STATUS		= 0x07,
-
-	ATA_REG_FEATURE		= ATA_REG_ERR, /* and their aliases */
-	ATA_REG_CMD		= ATA_REG_STATUS,
-	ATA_REG_BYTEL		= ATA_REG_LBAM,
-	ATA_REG_BYTEH		= ATA_REG_LBAH,
-	ATA_REG_DEVSEL		= ATA_REG_DEVICE,
-	ATA_REG_IRQ		= ATA_REG_NSECT,
-
-	/* ATA device commands */
-	ATA_CMD_DEV_RESET	= 0x08, /* ATAPI device reset */
-	ATA_CMD_CHK_POWER	= 0xE5, /* check power mode */
-	ATA_CMD_STANDBY		= 0xE2, /* place in standby power mode */
-	ATA_CMD_IDLE		= 0xE3, /* place in idle power mode */
-	ATA_CMD_EDD		= 0x90,	/* execute device diagnostic */
-	ATA_CMD_DOWNLOAD_MICRO  = 0x92,
-	ATA_CMD_NOP		= 0x00,
-	ATA_CMD_FLUSH		= 0xE7,
-	ATA_CMD_FLUSH_EXT	= 0xEA,
-	ATA_CMD_ID_ATA		= 0xEC,
-	ATA_CMD_ID_ATAPI	= 0xA1,
-	ATA_CMD_SERVICE		= 0xA2,
-	ATA_CMD_READ		= 0xC8,
-	ATA_CMD_READ_EXT	= 0x25,
-	ATA_CMD_READ_QUEUED	= 0x26,
-	ATA_CMD_READ_STREAM_EXT	= 0x2B,
-	ATA_CMD_READ_STREAM_DMA_EXT = 0x2A,
-	ATA_CMD_WRITE		= 0xCA,
-	ATA_CMD_WRITE_EXT	= 0x35,
-	ATA_CMD_WRITE_QUEUED	= 0x36,
-	ATA_CMD_WRITE_STREAM_EXT = 0x3B,
-	ATA_CMD_WRITE_STREAM_DMA_EXT = 0x3A,
-	ATA_CMD_WRITE_FUA_EXT	= 0x3D,
-	ATA_CMD_WRITE_QUEUED_FUA_EXT = 0x3E,
-	ATA_CMD_FPDMA_READ	= 0x60,
-	ATA_CMD_FPDMA_WRITE	= 0x61,
-	ATA_CMD_PIO_READ	= 0x20,
-	ATA_CMD_PIO_READ_EXT	= 0x24,
-	ATA_CMD_PIO_WRITE	= 0x30,
-	ATA_CMD_PIO_WRITE_EXT	= 0x34,
-	ATA_CMD_READ_MULTI	= 0xC4,
-	ATA_CMD_READ_MULTI_EXT	= 0x29,
-	ATA_CMD_WRITE_MULTI	= 0xC5,
-	ATA_CMD_WRITE_MULTI_EXT	= 0x39,
-	ATA_CMD_WRITE_MULTI_FUA_EXT = 0xCE,
-	ATA_CMD_SET_FEATURES	= 0xEF,
-	ATA_CMD_SET_MULTI	= 0xC6,
-	ATA_CMD_PACKET		= 0xA0,
-	ATA_CMD_VERIFY		= 0x40,
-	ATA_CMD_VERIFY_EXT	= 0x42,
-	ATA_CMD_WRITE_UNCORR_EXT = 0x45,
-	ATA_CMD_STANDBYNOW1	= 0xE0,
-	ATA_CMD_IDLEIMMEDIATE	= 0xE1,
-	ATA_CMD_SLEEP		= 0xE6,
-	ATA_CMD_INIT_DEV_PARAMS	= 0x91,
-	ATA_CMD_READ_NATIVE_MAX	= 0xF8,
-	ATA_CMD_READ_NATIVE_MAX_EXT = 0x27,
-	ATA_CMD_SET_MAX		= 0xF9,
-	ATA_CMD_SET_MAX_EXT	= 0x37,
-	ATA_CMD_READ_LOG_EXT	= 0x2F,
-	ATA_CMD_WRITE_LOG_EXT	= 0x3F,
-	ATA_CMD_READ_LOG_DMA_EXT = 0x47,
-	ATA_CMD_WRITE_LOG_DMA_EXT = 0x57,
-	ATA_CMD_TRUSTED_RCV	= 0x5C,
-	ATA_CMD_TRUSTED_RCV_DMA = 0x5D,
-	ATA_CMD_TRUSTED_SND	= 0x5E,
-	ATA_CMD_TRUSTED_SND_DMA = 0x5F,
-	ATA_CMD_PMP_READ	= 0xE4,
-	ATA_CMD_PMP_WRITE	= 0xE8,
-	ATA_CMD_CONF_OVERLAY	= 0xB1,
-	ATA_CMD_SEC_SET_PASS	= 0xF1,
-	ATA_CMD_SEC_UNLOCK	= 0xF2,
-	ATA_CMD_SEC_ERASE_PREP	= 0xF3,
-	ATA_CMD_SEC_ERASE_UNIT	= 0xF4,
-	ATA_CMD_SEC_FREEZE_LOCK	= 0xF5,
-	ATA_CMD_SEC_DISABLE_PASS = 0xF6,
-	ATA_CMD_CONFIG_STREAM	= 0x51,
-	ATA_CMD_SMART		= 0xB0,
-	ATA_CMD_MEDIA_LOCK	= 0xDE,
-	ATA_CMD_MEDIA_UNLOCK	= 0xDF,
-	ATA_CMD_DSM		= 0x06,
-	ATA_CMD_CHK_MED_CRD_TYP = 0xD1,
-	ATA_CMD_CFA_REQ_EXT_ERR = 0x03,
-	ATA_CMD_CFA_WRITE_NE	= 0x38,
-	ATA_CMD_CFA_TRANS_SECT	= 0x87,
-	ATA_CMD_CFA_ERASE	= 0xC0,
-	ATA_CMD_CFA_WRITE_MULT_NE = 0xCD,
-	/* marked obsolete in the ATA/ATAPI-7 spec */
-	ATA_CMD_RESTORE		= 0x10,
-
-	/* READ_LOG_EXT pages */
-	ATA_LOG_SATA_NCQ	= 0x10,
-
-	/* READ/WRITE LONG (obsolete) */
-	ATA_CMD_READ_LONG	= 0x22,
-	ATA_CMD_READ_LONG_ONCE	= 0x23,
-	ATA_CMD_WRITE_LONG	= 0x32,
-	ATA_CMD_WRITE_LONG_ONCE	= 0x33,
-
-	/* SETFEATURES stuff */
-	SETFEATURES_XFER	= 0x03,
-	XFER_UDMA_7		= 0x47,
-	XFER_UDMA_6		= 0x46,
-	XFER_UDMA_5		= 0x45,
-	XFER_UDMA_4		= 0x44,
-	XFER_UDMA_3		= 0x43,
-	XFER_UDMA_2		= 0x42,
-	XFER_UDMA_1		= 0x41,
-	XFER_UDMA_0		= 0x40,
-	XFER_MW_DMA_4		= 0x24,	/* CFA only */
-	XFER_MW_DMA_3		= 0x23,	/* CFA only */
-	XFER_MW_DMA_2		= 0x22,
-	XFER_MW_DMA_1		= 0x21,
-	XFER_MW_DMA_0		= 0x20,
-	XFER_SW_DMA_2		= 0x12,
-	XFER_SW_DMA_1		= 0x11,
-	XFER_SW_DMA_0		= 0x10,
-	XFER_PIO_6		= 0x0E,	/* CFA only */
-	XFER_PIO_5		= 0x0D,	/* CFA only */
-	XFER_PIO_4		= 0x0C,
-	XFER_PIO_3		= 0x0B,
-	XFER_PIO_2		= 0x0A,
-	XFER_PIO_1		= 0x09,
-	XFER_PIO_0		= 0x08,
-	XFER_PIO_SLOW		= 0x00,
-
-	SETFEATURES_WC_ON	= 0x02, /* Enable write cache */
-	SETFEATURES_WC_OFF	= 0x82, /* Disable write cache */
-
-	/* Enable/Disable Automatic Acoustic Management */
-	SETFEATURES_AAM_ON	= 0x42,
-	SETFEATURES_AAM_OFF	= 0xC2,
-
-	SETFEATURES_SPINUP	= 0x07, /* Spin-up drive */
-
-	SETFEATURES_SATA_ENABLE = 0x10, /* Enable use of SATA feature */
-	SETFEATURES_SATA_DISABLE = 0x90, /* Disable use of SATA feature */
-
-	/* SETFEATURE Sector counts for SATA features */
-	SATA_FPDMA_OFFSET	= 0x01,	/* FPDMA non-zero buffer offsets */
-	SATA_FPDMA_AA		= 0x02, /* FPDMA Setup FIS Auto-Activate */
-	SATA_DIPM		= 0x03,	/* Device Initiated Power Management */
-	SATA_FPDMA_IN_ORDER	= 0x04,	/* FPDMA in-order data delivery */
-	SATA_AN			= 0x05,	/* Asynchronous Notification */
-	SATA_SSP		= 0x06,	/* Software Settings Preservation */
-
-	/* feature values for SET_MAX */
-	ATA_SET_MAX_ADDR	= 0x00,
-	ATA_SET_MAX_PASSWD	= 0x01,
-	ATA_SET_MAX_LOCK	= 0x02,
-	ATA_SET_MAX_UNLOCK	= 0x03,
-	ATA_SET_MAX_FREEZE_LOCK	= 0x04,
-
-	/* feature values for DEVICE CONFIGURATION OVERLAY */
-	ATA_DCO_RESTORE		= 0xC0,
-	ATA_DCO_FREEZE_LOCK	= 0xC1,
-	ATA_DCO_IDENTIFY	= 0xC2,
-	ATA_DCO_SET		= 0xC3,
-
-	/* feature values for SMART */
-	ATA_SMART_ENABLE	= 0xD8,
-	ATA_SMART_READ_VALUES	= 0xD0,
-	ATA_SMART_READ_THRESHOLDS = 0xD1,
-
-	/* feature values for Data Set Management */
-	ATA_DSM_TRIM		= 0x01,
-
-	/* password used in LBA Mid / LBA High for executing SMART commands */
-	ATA_SMART_LBAM_PASS	= 0x4F,
-	ATA_SMART_LBAH_PASS	= 0xC2,
-
-	/* ATAPI stuff */
-	ATAPI_PKT_DMA		= (1 << 0),
-	ATAPI_DMADIR		= (1 << 2),	/* ATAPI data dir:
-						   0=to device, 1=to host */
-	ATAPI_CDB_LEN		= 16,
-
-	/* PMP stuff */
-	SATA_PMP_MAX_PORTS	= 15,
-	SATA_PMP_CTRL_PORT	= 15,
-
-	SATA_PMP_GSCR_DWORDS	= 128,
-	SATA_PMP_GSCR_PROD_ID	= 0,
-	SATA_PMP_GSCR_REV	= 1,
-	SATA_PMP_GSCR_PORT_INFO	= 2,
-	SATA_PMP_GSCR_ERROR	= 32,
-	SATA_PMP_GSCR_ERROR_EN	= 33,
-	SATA_PMP_GSCR_FEAT	= 64,
-	SATA_PMP_GSCR_FEAT_EN	= 96,
-
-	SATA_PMP_PSCR_STATUS	= 0,
-	SATA_PMP_PSCR_ERROR	= 1,
-	SATA_PMP_PSCR_CONTROL	= 2,
-
-	SATA_PMP_FEAT_BIST	= (1 << 0),
-	SATA_PMP_FEAT_PMREQ	= (1 << 1),
-	SATA_PMP_FEAT_DYNSSC	= (1 << 2),
-	SATA_PMP_FEAT_NOTIFY	= (1 << 3),
-
-	/* cable types */
-	ATA_CBL_NONE		= 0,
-	ATA_CBL_PATA40		= 1,
-	ATA_CBL_PATA80		= 2,
-	ATA_CBL_PATA40_SHORT	= 3,	/* 40 wire cable to high UDMA spec */
-	ATA_CBL_PATA_UNK	= 4,	/* don't know, maybe 80c? */
-	ATA_CBL_PATA_IGN	= 5,	/* don't know, ignore cable handling */
-	ATA_CBL_SATA		= 6,
-
-	/* SATA Status and Control Registers */
-	SCR_STATUS		= 0,
-	SCR_ERROR		= 1,
-	SCR_CONTROL		= 2,
-	SCR_ACTIVE		= 3,
-	SCR_NOTIFICATION	= 4,
-
-	/* SError bits */
-	SERR_DATA_RECOVERED	= (1 << 0), /* recovered data error */
-	SERR_COMM_RECOVERED	= (1 << 1), /* recovered comm failure */
-	SERR_DATA		= (1 << 8), /* unrecovered data error */
-	SERR_PERSISTENT		= (1 << 9), /* persistent data/comm error */
-	SERR_PROTOCOL		= (1 << 10), /* protocol violation */
-	SERR_INTERNAL		= (1 << 11), /* host internal error */
-	SERR_PHYRDY_CHG		= (1 << 16), /* PHY RDY changed */
-	SERR_PHY_INT_ERR	= (1 << 17), /* PHY internal error */
-	SERR_COMM_WAKE		= (1 << 18), /* Comm wake */
-	SERR_10B_8B_ERR		= (1 << 19), /* 10b to 8b decode error */
-	SERR_DISPARITY		= (1 << 20), /* Disparity */
-	SERR_CRC		= (1 << 21), /* CRC error */
-	SERR_HANDSHAKE		= (1 << 22), /* Handshake error */
-	SERR_LINK_SEQ_ERR	= (1 << 23), /* Link sequence error */
-	SERR_TRANS_ST_ERROR	= (1 << 24), /* Transport state trans. error */
-	SERR_UNRECOG_FIS	= (1 << 25), /* Unrecognized FIS */
-	SERR_DEV_XCHG		= (1 << 26), /* device exchanged */
-
-	/* struct ata_taskfile flags */
-	ATA_TFLAG_LBA48		= (1 << 0), /* enable 48-bit LBA and "HOB" */
-	ATA_TFLAG_ISADDR	= (1 << 1), /* enable r/w to nsect/lba regs */
-	ATA_TFLAG_DEVICE	= (1 << 2), /* enable r/w to device reg */
-	ATA_TFLAG_WRITE		= (1 << 3), /* data dir: host->dev==1 (write) */
-	ATA_TFLAG_LBA		= (1 << 4), /* enable LBA */
-	ATA_TFLAG_FUA		= (1 << 5), /* enable FUA */
-	ATA_TFLAG_POLLING	= (1 << 6), /* set nIEN to 1 and use polling */
-
-	/* protocol flags */
-	ATA_PROT_FLAG_PIO	= (1 << 0), /* is PIO */
-	ATA_PROT_FLAG_DMA	= (1 << 1), /* is DMA */
-	ATA_PROT_FLAG_DATA	= ATA_PROT_FLAG_PIO | ATA_PROT_FLAG_DMA,
-	ATA_PROT_FLAG_NCQ	= (1 << 2), /* is NCQ */
-	ATA_PROT_FLAG_ATAPI	= (1 << 3), /* is ATAPI */
-};
-
-enum ata_tf_protocols {
-	/* ATA taskfile protocols */
-	ATA_PROT_UNKNOWN,	/* unknown/invalid */
-	ATA_PROT_NODATA,	/* no data */
-	ATA_PROT_PIO,		/* PIO data xfer */
-	ATA_PROT_DMA,		/* DMA */
-	ATA_PROT_NCQ,		/* NCQ */
-	ATAPI_PROT_NODATA,	/* packet command, no data */
-	ATAPI_PROT_PIO,		/* packet command, PIO data xfer*/
-	ATAPI_PROT_DMA,		/* packet command with special DMA sauce */
-};
-
-enum ata_ioctls {
-	ATA_IOC_GET_IO32	= 0x309,
-	ATA_IOC_SET_IO32	= 0x324,
-};
-
-/* core structures */
-
-struct ata_bmdma_prd {
-	__le32			addr;
-	__le32			flags_len;
-};
-
-struct ata_taskfile {
-	unsigned long		flags;		/* ATA_TFLAG_xxx */
-	u8			protocol;	/* ATA_PROT_xxx */
-
-	u8			ctl;		/* control reg */
-
-	u8			hob_feature;	/* additional data */
-	u8			hob_nsect;	/* to support LBA48 */
-	u8			hob_lbal;
-	u8			hob_lbam;
-	u8			hob_lbah;
-
-	u8			feature;
-	u8			nsect;
-	u8			lbal;
-	u8			lbam;
-	u8			lbah;
-
-	u8			device;
-
-	u8			command;	/* IO operation */
-};
-
-/*
- * protocol tests
- */
-static inline unsigned int ata_prot_flags(u8 prot)
-{
-	switch (prot) {
-	case ATA_PROT_NODATA:
-		return 0;
-	case ATA_PROT_PIO:
-		return ATA_PROT_FLAG_PIO;
-	case ATA_PROT_DMA:
-		return ATA_PROT_FLAG_DMA;
-	case ATA_PROT_NCQ:
-		return ATA_PROT_FLAG_DMA | ATA_PROT_FLAG_NCQ;
-	case ATAPI_PROT_NODATA:
-		return ATA_PROT_FLAG_ATAPI;
-	case ATAPI_PROT_PIO:
-		return ATA_PROT_FLAG_ATAPI | ATA_PROT_FLAG_PIO;
-	case ATAPI_PROT_DMA:
-		return ATA_PROT_FLAG_ATAPI | ATA_PROT_FLAG_DMA;
-	}
-	return 0;
-}
-
-static inline int ata_is_atapi(u8 prot)
-{
-	return ata_prot_flags(prot) & ATA_PROT_FLAG_ATAPI;
-}
-
-static inline int ata_is_nodata(u8 prot)
-{
-	return !(ata_prot_flags(prot) & ATA_PROT_FLAG_DATA);
-}
-
-static inline int ata_is_pio(u8 prot)
-{
-	return ata_prot_flags(prot) & ATA_PROT_FLAG_PIO;
-}
-
-static inline int ata_is_dma(u8 prot)
-{
-	return ata_prot_flags(prot) & ATA_PROT_FLAG_DMA;
-}
-
-static inline int ata_is_ncq(u8 prot)
-{
-	return ata_prot_flags(prot) & ATA_PROT_FLAG_NCQ;
-}
-
-static inline int ata_is_data(u8 prot)
-{
-	return ata_prot_flags(prot) & ATA_PROT_FLAG_DATA;
-}
-
-/*
- * id tests
- */
-#define ata_id_is_ata(id)	(((id)[ATA_ID_CONFIG] & (1 << 15)) == 0)
-#define ata_id_has_lba(id)	((id)[ATA_ID_CAPABILITY] & (1 << 9))
-#define ata_id_has_dma(id)	((id)[ATA_ID_CAPABILITY] & (1 << 8))
-#define ata_id_has_ncq(id)	((id)[76] & (1 << 8))
-#define ata_id_queue_depth(id)	(((id)[ATA_ID_QUEUE_DEPTH] & 0x1f) + 1)
-#define ata_id_removeable(id)	((id)[ATA_ID_CONFIG] & (1 << 7))
-#define ata_id_has_atapi_AN(id)	\
-	( (((id)[76] != 0x0000) && ((id)[76] != 0xffff)) && \
-	  ((id)[78] & (1 << 5)) )
-#define ata_id_has_fpdma_aa(id)	\
-	( (((id)[76] != 0x0000) && ((id)[76] != 0xffff)) && \
-	  ((id)[78] & (1 << 2)) )
-#define ata_id_iordy_disable(id) ((id)[ATA_ID_CAPABILITY] & (1 << 10))
-#define ata_id_has_iordy(id) ((id)[ATA_ID_CAPABILITY] & (1 << 11))
-#define ata_id_u32(id,n)	\
-	(((u32) (id)[(n) + 1] << 16) | ((u32) (id)[(n)]))
-#define ata_id_u64(id,n)	\
-	( ((u64) (id)[(n) + 3] << 48) |	\
-	  ((u64) (id)[(n) + 2] << 32) |	\
-	  ((u64) (id)[(n) + 1] << 16) |	\
-	  ((u64) (id)[(n) + 0]) )
-
-#define ata_id_cdb_intr(id)	(((id)[ATA_ID_CONFIG] & 0x60) == 0x20)
-
-static inline bool ata_id_has_hipm(const u16 *id)
-{
-	u16 val = id[76];
-
-	if (val == 0 || val == 0xffff)
-		return false;
-
-	return val & (1 << 9);
-}
-
-static inline bool ata_id_has_dipm(const u16 *id)
-{
-	u16 val = id[78];
-
-	if (val == 0 || val == 0xffff)
-		return false;
-
-	return val & (1 << 3);
-}
-
-
-static inline bool ata_id_has_fua(const u16 *id)
-{
-	if ((id[ATA_ID_CFSSE] & 0xC000) != 0x4000)
-		return false;
-	return id[ATA_ID_CFSSE] & (1 << 6);
-}
-
-static inline bool ata_id_has_flush(const u16 *id)
-{
-	if ((id[ATA_ID_COMMAND_SET_2] & 0xC000) != 0x4000)
-		return false;
-	return id[ATA_ID_COMMAND_SET_2] & (1 << 12);
-}
-
-static inline bool ata_id_flush_enabled(const u16 *id)
-{
-	if (ata_id_has_flush(id) == 0)
-		return false;
-	if ((id[ATA_ID_CSF_DEFAULT] & 0xC000) != 0x4000)
-		return false;
-	return id[ATA_ID_CFS_ENABLE_2] & (1 << 12);
-}
-
-static inline bool ata_id_has_flush_ext(const u16 *id)
-{
-	if ((id[ATA_ID_COMMAND_SET_2] & 0xC000) != 0x4000)
-		return false;
-	return id[ATA_ID_COMMAND_SET_2] & (1 << 13);
-}
-
-static inline bool ata_id_flush_ext_enabled(const u16 *id)
-{
-	if (ata_id_has_flush_ext(id) == 0)
-		return false;
-	if ((id[ATA_ID_CSF_DEFAULT] & 0xC000) != 0x4000)
-		return false;
-	/*
-	 * some Maxtor disks have bit 13 defined incorrectly
-	 * so check bit 10 too
-	 */
-	return (id[ATA_ID_CFS_ENABLE_2] & 0x2400) == 0x2400;
-}
-
-static inline u32 ata_id_logical_sector_size(const u16 *id)
-{
-	/* T13/1699-D Revision 6a, Sep 6, 2008. Page 128.
-	 * IDENTIFY DEVICE data, word 117-118.
-	 * 0xd000 ignores bit 13 (logical:physical > 1)
-	 */
-	if ((id[ATA_ID_SECTOR_SIZE] & 0xd000) == 0x5000)
-		return (((id[ATA_ID_LOGICAL_SECTOR_SIZE+1] << 16)
-			 + id[ATA_ID_LOGICAL_SECTOR_SIZE]) * sizeof(u16)) ;
-	return ATA_SECT_SIZE;
-}
-
-static inline u8 ata_id_log2_per_physical_sector(const u16 *id)
-{
-	/* T13/1699-D Revision 6a, Sep 6, 2008. Page 128.
-	 * IDENTIFY DEVICE data, word 106.
-	 * 0xe000 ignores bit 12 (logical sector > 512 bytes)
-	 */
-	if ((id[ATA_ID_SECTOR_SIZE] & 0xe000) == 0x6000)
-		return (id[ATA_ID_SECTOR_SIZE] & 0xf);
-	return 0;
-}
-
-/* Offset of logical sectors relative to physical sectors.
- *
- * If device has more than one logical sector per physical sector
- * (aka 512 byte emulation), vendors might offset the "sector 0" address
- * so sector 63 is "naturally aligned" - e.g. FAT partition table.
- * This avoids Read/Mod/Write penalties when using FAT partition table
- * and updating "well aligned" (FS perspective) physical sectors on every
- * transaction.
- */
-static inline u16 ata_id_logical_sector_offset(const u16 *id,
-	 u8 log2_per_phys)
-{
-	u16 word_209 = id[209];
-
-	if ((log2_per_phys > 1) && (word_209 & 0xc000) == 0x4000) {
-		u16 first = word_209 & 0x3fff;
-		if (first > 0)
-			return (1 << log2_per_phys) - first;
-	}
-	return 0;
-}
-
-static inline bool ata_id_has_lba48(const u16 *id)
-{
-	if ((id[ATA_ID_COMMAND_SET_2] & 0xC000) != 0x4000)
-		return false;
-	if (!ata_id_u64(id, ATA_ID_LBA_CAPACITY_2))
-		return false;
-	return id[ATA_ID_COMMAND_SET_2] & (1 << 10);
-}
-
-static inline bool ata_id_lba48_enabled(const u16 *id)
-{
-	if (ata_id_has_lba48(id) == 0)
-		return false;
-	if ((id[ATA_ID_CSF_DEFAULT] & 0xC000) != 0x4000)
-		return false;
-	return id[ATA_ID_CFS_ENABLE_2] & (1 << 10);
-}
-
-static inline bool ata_id_hpa_enabled(const u16 *id)
-{
-	/* Yes children, word 83 valid bits cover word 82 data */
-	if ((id[ATA_ID_COMMAND_SET_2] & 0xC000) != 0x4000)
-		return false;
-	/* And 87 covers 85-87 */
-	if ((id[ATA_ID_CSF_DEFAULT] & 0xC000) != 0x4000)
-		return false;
-	/* Check command sets enabled as well as supported */
-	if ((id[ATA_ID_CFS_ENABLE_1] & (1 << 10)) == 0)
-		return false;
-	return id[ATA_ID_COMMAND_SET_1] & (1 << 10);
-}
-
-static inline bool ata_id_has_wcache(const u16 *id)
-{
-	/* Yes children, word 83 valid bits cover word 82 data */
-	if ((id[ATA_ID_COMMAND_SET_2] & 0xC000) != 0x4000)
-		return false;
-	return id[ATA_ID_COMMAND_SET_1] & (1 << 5);
-}
-
-static inline bool ata_id_has_pm(const u16 *id)
-{
-	if ((id[ATA_ID_COMMAND_SET_2] & 0xC000) != 0x4000)
-		return false;
-	return id[ATA_ID_COMMAND_SET_1] & (1 << 3);
-}
-
-static inline bool ata_id_rahead_enabled(const u16 *id)
-{
-	if ((id[ATA_ID_CSF_DEFAULT] & 0xC000) != 0x4000)
-		return false;
-	return id[ATA_ID_CFS_ENABLE_1] & (1 << 6);
-}
-
-static inline bool ata_id_wcache_enabled(const u16 *id)
-{
-	if ((id[ATA_ID_CSF_DEFAULT] & 0xC000) != 0x4000)
-		return false;
-	return id[ATA_ID_CFS_ENABLE_1] & (1 << 5);
-}
-
-/**
- *	ata_id_major_version	-	get ATA level of drive
- *	@id: Identify data
- *
- *	Caveats:
- *		ATA-1 considers identify optional
- *		ATA-2 introduces mandatory identify
- *		ATA-3 introduces word 80 and accurate reporting
- *
- *	The practical impact of this is that ata_id_major_version cannot
- *	reliably report on drives below ATA3.
- */
-
-static inline unsigned int ata_id_major_version(const u16 *id)
-{
-	unsigned int mver;
-
-	if (id[ATA_ID_MAJOR_VER] == 0xFFFF)
-		return 0;
-
-	for (mver = 14; mver >= 1; mver--)
-		if (id[ATA_ID_MAJOR_VER] & (1 << mver))
-			break;
-	return mver;
-}
-
-static inline bool ata_id_is_sata(const u16 *id)
-{
-	/*
-	 * See if word 93 is 0 AND drive is at least ATA-5 compatible
-	 * verifying that word 80 by casting it to a signed type --
-	 * this trick allows us to filter out the reserved values of
-	 * 0x0000 and 0xffff along with the earlier ATA revisions...
-	 */
-	if (id[ATA_ID_HW_CONFIG] == 0 && (short)id[ATA_ID_MAJOR_VER] >= 0x0020)
-		return true;
-	return false;
-}
-
-static inline bool ata_id_has_tpm(const u16 *id)
-{
-	/* The TPM bits are only valid on ATA8 */
-	if (ata_id_major_version(id) < 8)
-		return false;
-	if ((id[48] & 0xC000) != 0x4000)
-		return false;
-	return id[48] & (1 << 0);
-}
-
-static inline bool ata_id_has_dword_io(const u16 *id)
-{
-	/* ATA 8 reuses this flag for "trusted" computing */
-	if (ata_id_major_version(id) > 7)
-		return false;
-	return id[ATA_ID_DWORD_IO] & (1 << 0);
-}
-
-static inline bool ata_id_has_unload(const u16 *id)
-{
-	if (ata_id_major_version(id) >= 7 &&
-	    (id[ATA_ID_CFSSE] & 0xC000) == 0x4000 &&
-	    id[ATA_ID_CFSSE] & (1 << 13))
-		return true;
-	return false;
-}
-
-static inline bool ata_id_has_wwn(const u16 *id)
-{
-	return (id[ATA_ID_CSF_DEFAULT] & 0xC100) == 0x4100;
-}
-
-static inline int ata_id_form_factor(const u16 *id)
-{
-	u16 val = id[168];
-
-	if (ata_id_major_version(id) < 7 || val == 0 || val == 0xffff)
-		return 0;
-
-	val &= 0xf;
-
-	if (val > 5)
-		return 0;
-
-	return val;
-}
-
-static inline int ata_id_rotation_rate(const u16 *id)
-{
-	u16 val = id[217];
-
-	if (ata_id_major_version(id) < 7 || val == 0 || val == 0xffff)
-		return 0;
-
-	if (val > 1 && val < 0x401)
-		return 0;
-
-	return val;
-}
-
-static inline bool ata_id_has_trim(const u16 *id)
-{
-	if (ata_id_major_version(id) >= 7 &&
-	    (id[ATA_ID_DATA_SET_MGMT] & 1))
-		return true;
-	return false;
-}
-
-static inline bool ata_id_has_zero_after_trim(const u16 *id)
-{
-	/* DSM supported, deterministic read, and read zero after trim set */
-	if (ata_id_has_trim(id) &&
-	    (id[ATA_ID_ADDITIONAL_SUPP] & 0x4020) == 0x4020)
-		return true;
-
-	return false;
-}
-
-static inline bool ata_id_current_chs_valid(const u16 *id)
-{
-	/* For ATA-1 devices, if the INITIALIZE DEVICE PARAMETERS command
-	   has not been issued to the device then the values of
-	   id[ATA_ID_CUR_CYLS] to id[ATA_ID_CUR_SECTORS] are vendor specific. */
-	return (id[ATA_ID_FIELD_VALID] & 1) && /* Current translation valid */
-		id[ATA_ID_CUR_CYLS] &&  /* cylinders in current translation */
-		id[ATA_ID_CUR_HEADS] &&  /* heads in current translation */
-		id[ATA_ID_CUR_HEADS] <= 16 &&
-		id[ATA_ID_CUR_SECTORS];    /* sectors in current translation */
-}
-
-static inline bool ata_id_is_cfa(const u16 *id)
-{
-	if ((id[ATA_ID_CONFIG] == 0x848A) ||	/* Traditional CF */
-	    (id[ATA_ID_CONFIG] == 0x844A))	/* Delkin Devices CF */
-		return true;
-	/*
-	 * CF specs don't require specific value in the word 0 anymore and yet
-	 * they forbid to report the ATA version in the word 80 and require the
-	 * CFA feature set support to be indicated in the word 83 in this case.
-	 * Unfortunately, some cards only follow either of this requirements,
-	 * and while those that don't indicate CFA feature support need some
-	 * sort of quirk list, it seems impractical for the ones that do...
-	 */
-	return (id[ATA_ID_COMMAND_SET_2] & 0xC004) == 0x4004;
-}
-
-static inline bool ata_id_is_ssd(const u16 *id)
-{
-	return id[ATA_ID_ROT_SPEED] == 0x01;
-}
-
-static inline bool ata_id_pio_need_iordy(const u16 *id, const u8 pio)
-{
-	/* CF spec. r4.1 Table 22 says no IORDY on PIO5 and PIO6. */
-	if (pio > 4 && ata_id_is_cfa(id))
-		return false;
-	/* For PIO3 and higher it is mandatory. */
-	if (pio > 2)
-		return true;
-	/* Turn it on when possible. */
-	return ata_id_has_iordy(id);
-}
-
-static inline bool ata_drive_40wire(const u16 *dev_id)
-{
-	if (ata_id_is_sata(dev_id))
-		return false;	/* SATA */
-	if ((dev_id[ATA_ID_HW_CONFIG] & 0xE000) == 0x6000)
-		return false;	/* 80 wire */
-	return true;
-}
-
-static inline bool ata_drive_40wire_relaxed(const u16 *dev_id)
-{
-	if ((dev_id[ATA_ID_HW_CONFIG] & 0x2000) == 0x2000)
-		return false;	/* 80 wire */
-	return true;
-}
-
-static inline int atapi_cdb_len(const u16 *dev_id)
-{
-	u16 tmp = dev_id[ATA_ID_CONFIG] & 0x3;
-	switch (tmp) {
-	case 0:		return 12;
-	case 1:		return 16;
-	default:	return -1;
-	}
-}
-
-static inline bool atapi_command_packet_set(const u16 *dev_id)
-{
-	return (dev_id[ATA_ID_CONFIG] >> 8) & 0x1f;
-}
-
-static inline bool atapi_id_dmadir(const u16 *dev_id)
-{
-	return ata_id_major_version(dev_id) >= 7 && (dev_id[62] & 0x8000);
-}
-
-/*
- * ata_id_is_lba_capacity_ok() performs a sanity check on
- * the claimed LBA capacity value for the device.
- *
- * Returns 1 if LBA capacity looks sensible, 0 otherwise.
- *
- * It is called only once for each device.
- */
-static inline bool ata_id_is_lba_capacity_ok(u16 *id)
-{
-	unsigned long lba_sects, chs_sects, head, tail;
-
-	/* No non-LBA info .. so valid! */
-	if (id[ATA_ID_CYLS] == 0)
-		return true;
-
-	lba_sects = ata_id_u32(id, ATA_ID_LBA_CAPACITY);
-
-	/*
-	 * The ATA spec tells large drives to return
-	 * C/H/S = 16383/16/63 independent of their size.
-	 * Some drives can be jumpered to use 15 heads instead of 16.
-	 * Some drives can be jumpered to use 4092 cyls instead of 16383.
-	 */
-	if ((id[ATA_ID_CYLS] == 16383 ||
-	     (id[ATA_ID_CYLS] == 4092 && id[ATA_ID_CUR_CYLS] == 16383)) &&
-	    id[ATA_ID_SECTORS] == 63 &&
-	    (id[ATA_ID_HEADS] == 15 || id[ATA_ID_HEADS] == 16) &&
-	    (lba_sects >= 16383 * 63 * id[ATA_ID_HEADS]))
-		return true;
-
-	chs_sects = id[ATA_ID_CYLS] * id[ATA_ID_HEADS] * id[ATA_ID_SECTORS];
-
-	/* perform a rough sanity check on lba_sects: within 10% is OK */
-	if (lba_sects - chs_sects < chs_sects/10)
-		return true;
-
-	/* some drives have the word order reversed */
-	head = (lba_sects >> 16) & 0xffff;
-	tail = lba_sects & 0xffff;
-	lba_sects = head | (tail << 16);
-
-	if (lba_sects - chs_sects < chs_sects/10) {
-		*(__le32 *)&id[ATA_ID_LBA_CAPACITY] = __cpu_to_le32(lba_sects);
-		return true;	/* LBA capacity is (now) good */
-	}
-
-	return false;	/* LBA capacity value may be bad */
-}
-
-static inline void ata_id_to_hd_driveid(u16 *id)
-{
-#ifdef __BIG_ENDIAN
-	/* accessed in struct hd_driveid as 8-bit values */
-	id[ATA_ID_MAX_MULTSECT]	 = __cpu_to_le16(id[ATA_ID_MAX_MULTSECT]);
-	id[ATA_ID_CAPABILITY]	 = __cpu_to_le16(id[ATA_ID_CAPABILITY]);
-	id[ATA_ID_OLD_PIO_MODES] = __cpu_to_le16(id[ATA_ID_OLD_PIO_MODES]);
-	id[ATA_ID_OLD_DMA_MODES] = __cpu_to_le16(id[ATA_ID_OLD_DMA_MODES]);
-	id[ATA_ID_MULTSECT]	 = __cpu_to_le16(id[ATA_ID_MULTSECT]);
-
-	/* as 32-bit values */
-	*(u32 *)&id[ATA_ID_LBA_CAPACITY] = ata_id_u32(id, ATA_ID_LBA_CAPACITY);
-	*(u32 *)&id[ATA_ID_SPG]		 = ata_id_u32(id, ATA_ID_SPG);
-
-	/* as 64-bit value */
-	*(u64 *)&id[ATA_ID_LBA_CAPACITY_2] =
-		ata_id_u64(id, ATA_ID_LBA_CAPACITY_2);
-#endif
-}
-
-/*
- * Write LBA Range Entries to the buffer that will cover the extent from
- * sector to sector + count.  This is used for TRIM and for ADD LBA(S)
- * TO NV CACHE PINNED SET.
- */
-static inline unsigned ata_set_lba_range_entries(void *_buffer,
-		unsigned buf_size, u64 sector, unsigned long count)
-{
-	__le64 *buffer = _buffer;
-	unsigned i = 0, used_bytes;
-
-	while (i < buf_size / 8 ) { /* 6-byte LBA + 2-byte range per entry */
-		u64 entry = sector |
-			((u64)(count > 0xffff ? 0xffff : count) << 48);
-		buffer[i++] = __cpu_to_le64(entry);
-		if (count <= 0xffff)
-			break;
-		count -= 0xffff;
-		sector += 0xffff;
-	}
-
-	used_bytes = ALIGN(i * 8, 512);
-	memset(buffer + i, 0, used_bytes - i * 8);
-	return used_bytes;
-}
-
-static inline int is_multi_taskfile(struct ata_taskfile *tf)
-{
-	return (tf->command == ATA_CMD_READ_MULTI) ||
-	       (tf->command == ATA_CMD_WRITE_MULTI) ||
-	       (tf->command == ATA_CMD_READ_MULTI_EXT) ||
-	       (tf->command == ATA_CMD_WRITE_MULTI_EXT) ||
-	       (tf->command == ATA_CMD_WRITE_MULTI_FUA_EXT);
-}
-
-static inline bool ata_ok(u8 status)
-{
-	return ((status & (ATA_BUSY | ATA_DRDY | ATA_DF | ATA_DRQ | ATA_ERR))
-			== ATA_DRDY);
-}
-
-static inline bool lba_28_ok(u64 block, u32 n_block)
-{
-	/* check the ending block number: must be LESS THAN 0x0fffffff */
-	return ((block + n_block) < ((1 << 28) - 1)) && (n_block <= 256);
-}
-
-static inline bool lba_48_ok(u64 block, u32 n_block)
-{
-	/* check the ending block number */
-	return ((block + n_block - 1) < ((u64)1 << 48)) && (n_block <= 65536);
-}
-
-#define sata_pmp_gscr_vendor(gscr)	((gscr)[SATA_PMP_GSCR_PROD_ID] & 0xffff)
-#define sata_pmp_gscr_devid(gscr)	((gscr)[SATA_PMP_GSCR_PROD_ID] >> 16)
-#define sata_pmp_gscr_rev(gscr)		(((gscr)[SATA_PMP_GSCR_REV] >> 8) & 0xff)
-#define sata_pmp_gscr_ports(gscr)	((gscr)[SATA_PMP_GSCR_PORT_INFO] & 0xf)
-
-#endif /* __LINUX_ATA_H__ */
diff --git a/ANDROID_3.4.5/include/linux/ata_platform.h b/ANDROID_3.4.5/include/linux/ata_platform.h
deleted file mode 100644
index b856a2a5..00000000
--- a/ANDROID_3.4.5/include/linux/ata_platform.h
+++ /dev/null
@@ -1,34 +0,0 @@
-#ifndef __LINUX_ATA_PLATFORM_H
-#define __LINUX_ATA_PLATFORM_H
-
-struct pata_platform_info {
-	/*
-	 * I/O port shift, for platforms with ports that are
-	 * constantly spaced and need larger than the 1-byte
-	 * spacing used by ata_std_ports().
-	 */
-	unsigned int ioport_shift;
-	/* 
-	 * Indicate platform specific irq types and initial
-	 * IRQ flags when call request_irq()
-	 */
-	unsigned int irq_flags;
-};
-
-extern int __devinit __pata_platform_probe(struct device *dev,
-					   struct resource *io_res,
-					   struct resource *ctl_res,
-					   struct resource *irq_res,
-					   unsigned int ioport_shift,
-					   int __pio_mask);
-
-extern int __devexit __pata_platform_remove(struct device *dev);
-
-/*
- * Marvell SATA private data
- */
-struct mv_sata_platform_data {
-	int	n_ports; /* number of sata ports */
-};
-
-#endif /* __LINUX_ATA_PLATFORM_H */
diff --git a/ANDROID_3.4.5/include/linux/atalk.h b/ANDROID_3.4.5/include/linux/atalk.h
deleted file mode 100644
index f57c3688..00000000
--- a/ANDROID_3.4.5/include/linux/atalk.h
+++ /dev/null
@@ -1,209 +0,0 @@
-#ifndef __LINUX_ATALK_H__
-#define __LINUX_ATALK_H__
-
-#include <linux/types.h>
-#include <asm/byteorder.h>
-#include <linux/socket.h>
-
-/*
- * AppleTalk networking structures
- *
- * The following are directly referenced from the University Of Michigan
- * netatalk for compatibility reasons.
- */
-#define ATPORT_FIRST	1
-#define ATPORT_RESERVED	128
-#define ATPORT_LAST	254		/* 254 is only legal on localtalk */ 
-#define ATADDR_ANYNET	(__u16)0
-#define ATADDR_ANYNODE	(__u8)0
-#define ATADDR_ANYPORT  (__u8)0
-#define ATADDR_BCAST	(__u8)255
-#define DDP_MAXSZ	587
-#define DDP_MAXHOPS     15		/* 4 bits of hop counter */
-
-#define SIOCATALKDIFADDR       (SIOCPROTOPRIVATE + 0)
-
-struct atalk_addr {
-	__be16	s_net;
-	__u8	s_node;
-};
-
-struct sockaddr_at {
-	__kernel_sa_family_t sat_family;
-	__u8		  sat_port;
-	struct atalk_addr sat_addr;
-	char		  sat_zero[8];
-};
-
-struct atalk_netrange {
-	__u8	nr_phase;
-	__be16	nr_firstnet;
-	__be16	nr_lastnet;
-};
-
-#ifdef __KERNEL__
-
-#include <net/sock.h>
-
-struct atalk_route {
-	struct net_device  *dev;
-	struct atalk_addr  target;
-	struct atalk_addr  gateway;
-	int		   flags;
-	struct atalk_route *next;
-};
-
-/**
- *	struct atalk_iface - AppleTalk Interface
- *	@dev - Network device associated with this interface
- *	@address - Our address
- *	@status - What are we doing?
- *	@nets - Associated direct netrange
- *	@next - next element in the list of interfaces
- */
-struct atalk_iface {
-	struct net_device	*dev;
-	struct atalk_addr	address;
-	int			status;
-#define ATIF_PROBE	1		/* Probing for an address */
-#define ATIF_PROBE_FAIL	2		/* Probe collided */
-	struct atalk_netrange	nets;
-	struct atalk_iface	*next;
-};
-	
-struct atalk_sock {
-	/* struct sock has to be the first member of atalk_sock */
-	struct sock	sk;
-	__be16		dest_net;
-	__be16		src_net;
-	unsigned char	dest_node;
-	unsigned char	src_node;
-	unsigned char	dest_port;
-	unsigned char	src_port;
-};
-
-static inline struct atalk_sock *at_sk(struct sock *sk)
-{
-	return (struct atalk_sock *)sk;
-}
-
-struct ddpehdr {
-	__be16	deh_len_hops;	/* lower 10 bits are length, next 4 - hops */
-	__be16	deh_sum;
-	__be16	deh_dnet;
-	__be16	deh_snet;
-	__u8	deh_dnode;
-	__u8	deh_snode;
-	__u8	deh_dport;
-	__u8	deh_sport;
-	/* And netatalk apps expect to stick the type in themselves */
-};
-
-static __inline__ struct ddpehdr *ddp_hdr(struct sk_buff *skb)
-{
-	return (struct ddpehdr *)skb_transport_header(skb);
-}
-
-/* AppleTalk AARP headers */
-struct elapaarp {
-	__be16	hw_type;
-#define AARP_HW_TYPE_ETHERNET		1
-#define AARP_HW_TYPE_TOKENRING		2
-	__be16	pa_type;
-	__u8	hw_len;
-	__u8	pa_len;
-#define AARP_PA_ALEN			4
-	__be16	function;
-#define AARP_REQUEST			1
-#define AARP_REPLY			2
-#define AARP_PROBE			3
-	__u8	hw_src[ETH_ALEN];
-	__u8	pa_src_zero;
-	__be16	pa_src_net;
-	__u8	pa_src_node;
-	__u8	hw_dst[ETH_ALEN];
-	__u8	pa_dst_zero;
-	__be16	pa_dst_net;
-	__u8	pa_dst_node;
-} __attribute__ ((packed));
-
-static __inline__ struct elapaarp *aarp_hdr(struct sk_buff *skb)
-{
-	return (struct elapaarp *)skb_transport_header(skb);
-}
-
-/* Not specified - how long till we drop a resolved entry */
-#define AARP_EXPIRY_TIME	(5 * 60 * HZ)
-/* Size of hash table */
-#define AARP_HASH_SIZE		16
-/* Fast retransmission timer when resolving */
-#define AARP_TICK_TIME		(HZ / 5)
-/* Send 10 requests then give up (2 seconds) */
-#define AARP_RETRANSMIT_LIMIT	10
-/*
- * Some value bigger than total retransmit time + a bit for last reply to
- * appear and to stop continual requests
- */
-#define AARP_RESOLVE_TIME	(10 * HZ)
-
-extern struct datalink_proto *ddp_dl, *aarp_dl;
-extern void aarp_proto_init(void);
-
-/* Inter module exports */
-
-/* Give a device find its atif control structure */
-static inline struct atalk_iface *atalk_find_dev(struct net_device *dev)
-{
-	return dev->atalk_ptr;
-}
-
-extern struct atalk_addr *atalk_find_dev_addr(struct net_device *dev);
-extern struct net_device *atrtr_get_dev(struct atalk_addr *sa);
-extern int		 aarp_send_ddp(struct net_device *dev,
-				       struct sk_buff *skb,
-				       struct atalk_addr *sa, void *hwaddr);
-extern void		 aarp_device_down(struct net_device *dev);
-extern void		 aarp_probe_network(struct atalk_iface *atif);
-extern int 		 aarp_proxy_probe_network(struct atalk_iface *atif,
-				     struct atalk_addr *sa);
-extern void		 aarp_proxy_remove(struct net_device *dev,
-					   struct atalk_addr *sa);
-
-extern void		aarp_cleanup_module(void);
-
-extern struct hlist_head atalk_sockets;
-extern rwlock_t atalk_sockets_lock;
-
-extern struct atalk_route *atalk_routes;
-extern rwlock_t atalk_routes_lock;
-
-extern struct atalk_iface *atalk_interfaces;
-extern rwlock_t atalk_interfaces_lock;
-
-extern struct atalk_route atrtr_default;
-
-extern const struct file_operations atalk_seq_arp_fops;
-
-extern int sysctl_aarp_expiry_time;
-extern int sysctl_aarp_tick_time;
-extern int sysctl_aarp_retransmit_limit;
-extern int sysctl_aarp_resolve_time;
-
-#ifdef CONFIG_SYSCTL
-extern void atalk_register_sysctl(void);
-extern void atalk_unregister_sysctl(void);
-#else
-#define atalk_register_sysctl()		do { } while(0)
-#define atalk_unregister_sysctl()	do { } while(0)
-#endif
-
-#ifdef CONFIG_PROC_FS
-extern int atalk_proc_init(void);
-extern void atalk_proc_exit(void);
-#else
-#define atalk_proc_init()	({ 0; })
-#define atalk_proc_exit()	do { } while(0)
-#endif /* CONFIG_PROC_FS */
-
-#endif /* __KERNEL__ */
-#endif /* __LINUX_ATALK_H__ */
diff --git a/ANDROID_3.4.5/include/linux/ath9k_platform.h b/ANDROID_3.4.5/include/linux/ath9k_platform.h
deleted file mode 100644
index 6e3f54f3..00000000
--- a/ANDROID_3.4.5/include/linux/ath9k_platform.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * Copyright (c) 2008 Atheros Communications Inc.
- * Copyright (c) 2009 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (c) 2009 Imre Kaloz <kaloz@openwrt.org>
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- */
-
-#ifndef _LINUX_ATH9K_PLATFORM_H
-#define _LINUX_ATH9K_PLATFORM_H
-
-#define ATH9K_PLAT_EEP_MAX_WORDS	2048
-
-struct ath9k_platform_data {
-	u16 eeprom_data[ATH9K_PLAT_EEP_MAX_WORDS];
-	u8 *macaddr;
-
-	int led_pin;
-	u32 gpio_mask;
-	u32 gpio_val;
-
-	bool is_clk_25mhz;
-	int (*get_mac_revision)(void);
-	int (*external_reset)(void);
-};
-
-#endif /* _LINUX_ATH9K_PLATFORM_H */
diff --git a/ANDROID_3.4.5/include/linux/atm.h b/ANDROID_3.4.5/include/linux/atm.h
deleted file mode 100644
index d3b29217..00000000
--- a/ANDROID_3.4.5/include/linux/atm.h
+++ /dev/null
@@ -1,251 +0,0 @@
-/* atm.h - general ATM declarations */
- 
-/* Written 1995-2000 by Werner Almesberger, EPFL LRC/ICA */
- 
-
-/*
- * WARNING: User-space programs should not #include <linux/atm.h> directly.
- *          Instead, #include <atm.h>
- */
-
-#ifndef _LINUX_ATM_H
-#define _LINUX_ATM_H
-
-/*
- * BEGIN_xx and END_xx markers are used for automatic generation of
- * documentation. Do not change them.
- */
-
-#include <linux/compiler.h>
-#include <linux/atmapi.h>
-#include <linux/atmsap.h>
-#include <linux/atmioc.h>
-#include <linux/types.h>
-
-
-/* general ATM constants */
-#define ATM_CELL_SIZE		    53	/* ATM cell size incl. header */
-#define ATM_CELL_PAYLOAD	    48	/* ATM payload size */
-#define ATM_AAL0_SDU		    52	/* AAL0 SDU size */
-#define ATM_MAX_AAL34_PDU	 65535	/* maximum AAL3/4 PDU payload */
-#define ATM_AAL5_TRAILER	     8	/* AAL5 trailer size */
-#define ATM_MAX_AAL5_PDU	 65535	/* maximum AAL5 PDU payload */
-#define ATM_MAX_CDV		  9999	/* maximum (default) CDV */
-#define ATM_NOT_RSV_VCI		    32	/* first non-reserved VCI value */
-
-#define ATM_MAX_VPI		   255	/* maximum VPI at the UNI */
-#define ATM_MAX_VPI_NNI		  4096	/* maximum VPI at the NNI */
-#define ATM_MAX_VCI		 65535	/* maximum VCI */
-
-
-/* "protcol" values for the socket system call */
-#define ATM_NO_AAL	0		/* AAL not specified */
-#define ATM_AAL0	13		/* "raw" ATM cells */
-#define ATM_AAL1	1		/* AAL1 (CBR) */
-#define ATM_AAL2	2		/* AAL2 (VBR) */
-#define ATM_AAL34	3		/* AAL3/4 (data) */
-#define ATM_AAL5	5		/* AAL5 (data) */
-
-/*
- * socket option name coding functions
- *
- * Note that __SO_ENCODE and __SO_LEVEL are somewhat a hack since the
- * << 22 only reserves 9 bits for the level.  On some architectures
- * SOL_SOCKET is 0xFFFF, so that's a bit of a problem
- */
-
-#define __SO_ENCODE(l,n,t)	((((l) & 0x1FF) << 22) | ((n) << 16) | \
-				sizeof(t))
-#define __SO_LEVEL_MATCH(c,m)	(((c) >> 22) == ((m) & 0x1FF))
-#define __SO_NUMBER(c)		(((c) >> 16) & 0x3f)
-#define __SO_SIZE(c)		((c) & 0x3fff)
-
-/*
- * ATM layer
- */
-
-#define SO_SETCLP	__SO_ENCODE(SOL_ATM,0,int)
-			    /* set CLP bit value - TODO */
-#define SO_CIRANGE	__SO_ENCODE(SOL_ATM,1,struct atm_cirange)
-			    /* connection identifier range; socket must be
-			       bound or connected */
-#define SO_ATMQOS	__SO_ENCODE(SOL_ATM,2,struct atm_qos)
-			    /* Quality of Service setting */
-#define SO_ATMSAP	__SO_ENCODE(SOL_ATM,3,struct atm_sap)
-			    /* Service Access Point */
-#define SO_ATMPVC	__SO_ENCODE(SOL_ATM,4,struct sockaddr_atmpvc)
-			    /* "PVC" address (also for SVCs); get only */
-#define SO_MULTIPOINT	__SO_ENCODE(SOL_ATM, 5, int)
-			    /* make this vc a p2mp */
-
-
-/*
- * Note @@@: since the socket layers don't really distinguish the control and
- * the data plane but generally seems to be data plane-centric, any layer is
- * about equally wrong for the SAP. If you have a better idea about this,
- * please speak up ...
- */
-
-
-/* ATM cell header (for AAL0) */
-
-/* BEGIN_CH */
-#define ATM_HDR_GFC_MASK	0xf0000000
-#define ATM_HDR_GFC_SHIFT	28
-#define ATM_HDR_VPI_MASK	0x0ff00000
-#define ATM_HDR_VPI_SHIFT	20
-#define ATM_HDR_VCI_MASK	0x000ffff0
-#define ATM_HDR_VCI_SHIFT	4
-#define ATM_HDR_PTI_MASK	0x0000000e
-#define ATM_HDR_PTI_SHIFT	1
-#define ATM_HDR_CLP		0x00000001
-/* END_CH */
-
-
-/* PTI codings */
-
-/* BEGIN_PTI */
-#define ATM_PTI_US0	0  /* user data cell, congestion not exp, SDU-type 0 */
-#define ATM_PTI_US1	1  /* user data cell, congestion not exp, SDU-type 1 */
-#define ATM_PTI_UCES0	2  /* user data cell, cong. experienced, SDU-type 0 */
-#define ATM_PTI_UCES1	3  /* user data cell, cong. experienced, SDU-type 1 */
-#define ATM_PTI_SEGF5	4  /* segment OAM F5 flow related cell */
-#define ATM_PTI_E2EF5	5  /* end-to-end OAM F5 flow related cell */
-#define ATM_PTI_RSV_RM	6  /* reserved for traffic control/resource mgmt */
-#define ATM_PTI_RSV	7  /* reserved */
-/* END_PTI */
-
-
-/*
- * The following items should stay in linux/atm.h, which should be linked to
- * netatm/atm.h
- */
-
-/* Traffic description */
-
-#define ATM_NONE	0		/* no traffic */
-#define ATM_UBR		1
-#define ATM_CBR		2
-#define ATM_VBR		3
-#define ATM_ABR		4
-#define ATM_ANYCLASS	5		/* compatible with everything */
-
-#define ATM_MAX_PCR	-1		/* maximum available PCR */
-
-struct atm_trafprm {
-	unsigned char	traffic_class;	/* traffic class (ATM_UBR, ...) */
-	int		max_pcr;	/* maximum PCR in cells per second */
-	int		pcr;		/* desired PCR in cells per second */
-	int		min_pcr;	/* minimum PCR in cells per second */
-	int		max_cdv;	/* maximum CDV in microseconds */
-	int		max_sdu;	/* maximum SDU in bytes */
-        /* extra params for ABR */
-        unsigned int 	icr;         	/* Initial Cell Rate (24-bit) */
-        unsigned int	tbe;		/* Transient Buffer Exposure (24-bit) */ 
-        unsigned int 	frtt : 24;	/* Fixed Round Trip Time (24-bit) */
-        unsigned int 	rif  : 4;       /* Rate Increment Factor (4-bit) */
-        unsigned int 	rdf  : 4;       /* Rate Decrease Factor (4-bit) */
-        unsigned int nrm_pres  :1;      /* nrm present bit */
-        unsigned int trm_pres  :1;     	/* rm present bit */
-        unsigned int adtf_pres :1;     	/* adtf present bit */
-        unsigned int cdf_pres  :1;    	/* cdf present bit*/
-        unsigned int nrm       :3;     	/* Max # of Cells for each forward RM cell (3-bit) */
-        unsigned int trm       :3;    	/* Time between forward RM cells (3-bit) */    
-	unsigned int adtf      :10;     /* ACR Decrease Time Factor (10-bit) */
-	unsigned int cdf       :3;      /* Cutoff Decrease Factor (3-bit) */
-        unsigned int spare     :9;      /* spare bits */ 
-};
-
-struct atm_qos {
-	struct atm_trafprm txtp;	/* parameters in TX direction */
-	struct atm_trafprm rxtp __ATM_API_ALIGN;
-					/* parameters in RX direction */
-	unsigned char aal __ATM_API_ALIGN;
-};
-
-/* PVC addressing */
-
-#define ATM_ITF_ANY	-1		/* "magic" PVC address values */
-#define ATM_VPI_ANY	-1
-#define ATM_VCI_ANY	-1
-#define ATM_VPI_UNSPEC	-2
-#define ATM_VCI_UNSPEC	-2
-
-
-struct sockaddr_atmpvc {
-	unsigned short 	sap_family;	/* address family, AF_ATMPVC  */
-	struct {			/* PVC address */
-		short	itf;		/* ATM interface */
-		short	vpi;		/* VPI (only 8 bits at UNI) */
-		int	vci;		/* VCI (only 16 bits at UNI) */
-	} sap_addr __ATM_API_ALIGN;	/* PVC address */
-};
-
-/* SVC addressing */
-
-#define	ATM_ESA_LEN	20		/* ATM End System Address length */
-#define ATM_E164_LEN	12		/* maximum E.164 number length */
-
-#define ATM_AFI_DCC	0x39		/* DCC ATM Format */
-#define ATM_AFI_ICD	0x47		/* ICD ATM Format */
-#define ATM_AFI_E164	0x45		/* E.164 ATM Format */
-#define ATM_AFI_LOCAL	0x49		/* Local ATM Format */ 
-
-#define ATM_AFI_DCC_GROUP	0xBD	/* DCC ATM Group Format */
-#define ATM_AFI_ICD_GROUP	0xC5	/* ICD ATM Group Format */
-#define ATM_AFI_E164_GROUP	0xC3	/* E.164 ATM Group Format */
-#define ATM_AFI_LOCAL_GROUP	0xC7	/* Local ATM Group Format */
-
-#define ATM_LIJ_NONE	0		/* no leaf-initiated join */
-#define ATM_LIJ		1		/* request joining */
-#define ATM_LIJ_RPJ	2		/* set to root-prompted join */
-#define ATM_LIJ_NJ	3		/* set to network join */
-
-
-struct sockaddr_atmsvc {
-    unsigned short 	sas_family;	/* address family, AF_ATMSVC */
-    struct {				/* SVC address */
-        unsigned char	prv[ATM_ESA_LEN];/* private ATM address */
-        char		pub[ATM_E164_LEN+1]; /* public address (E.164) */
-    					/* unused addresses must be bzero'ed */
-	char		lij_type;	/* role in LIJ call; one of ATM_LIJ* */
-	__u32	lij_id;		/* LIJ call identifier */
-    } sas_addr __ATM_API_ALIGN;		/* SVC address */
-};
-
-
-static __inline__ int atmsvc_addr_in_use(struct sockaddr_atmsvc addr)
-{
-	return *addr.sas_addr.prv || *addr.sas_addr.pub;
-}
-
-
-static __inline__ int atmpvc_addr_in_use(struct sockaddr_atmpvc addr)
-{
-	return addr.sap_addr.itf || addr.sap_addr.vpi || addr.sap_addr.vci;
-}
-
-
-/*
- * Some stuff for linux/sockios.h
- */
-
-struct atmif_sioc {
-	int number;
-	int length;
-	void __user *arg;
-};
-
-#ifdef __KERNEL__
-#ifdef CONFIG_COMPAT
-#include <linux/compat.h>
-struct compat_atmif_sioc {
-	int number;
-	int length;
-	compat_uptr_t arg;
-};
-#endif
-#endif
-
-typedef unsigned short atm_backend_t;
-#endif
diff --git a/ANDROID_3.4.5/include/linux/atm_eni.h b/ANDROID_3.4.5/include/linux/atm_eni.h
deleted file mode 100644
index 34f31797..00000000
--- a/ANDROID_3.4.5/include/linux/atm_eni.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/* atm_eni.h - Driver-specific declarations of the ENI driver (for use by
-	       driver-specific utilities) */
-
-/* Written 1995-2000 by Werner Almesberger, EPFL LRC/ICA */
-
-
-#ifndef LINUX_ATM_ENI_H
-#define LINUX_ATM_ENI_H
-
-#include <linux/atmioc.h>
-
-
-struct eni_multipliers {
-	int tx,rx;	/* values are in percent and must be > 100 */
-};
-
-
-#define ENI_MEMDUMP     _IOW('a',ATMIOC_SARPRV,struct atmif_sioc)
-                                                /* printk memory map */
-#define ENI_SETMULT	_IOW('a',ATMIOC_SARPRV+7,struct atmif_sioc)
-						/* set buffer multipliers */
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/atm_he.h b/ANDROID_3.4.5/include/linux/atm_he.h
deleted file mode 100644
index 2a7713b5..00000000
--- a/ANDROID_3.4.5/include/linux/atm_he.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/* atm_he.h */
-
-#ifndef LINUX_ATM_HE_H
-#define LINUX_ATM_HE_H
-
-#include <linux/atmioc.h>
-
-#define HE_GET_REG	_IOW('a', ATMIOC_SARPRV, struct atmif_sioc)
-
-#define HE_REGTYPE_PCI	1
-#define HE_REGTYPE_RCM	2
-#define HE_REGTYPE_TCM	3
-#define HE_REGTYPE_MBOX	4
-
-struct he_ioctl_reg {
-	unsigned addr, val;
-	char type;
-};
-
-#endif /* LINUX_ATM_HE_H */
diff --git a/ANDROID_3.4.5/include/linux/atm_idt77105.h b/ANDROID_3.4.5/include/linux/atm_idt77105.h
deleted file mode 100644
index 8b724000..00000000
--- a/ANDROID_3.4.5/include/linux/atm_idt77105.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/* atm_idt77105.h - Driver-specific declarations of the IDT77105 driver (for
- * use by driver-specific utilities) */
-
-/* Written 1999 by Greg Banks <gnb@linuxfan.com>. Copied from atm_suni.h. */
-
-
-#ifndef LINUX_ATM_IDT77105_H
-#define LINUX_ATM_IDT77105_H
-
-#include <linux/types.h>
-#include <linux/atmioc.h>
-#include <linux/atmdev.h>
-
-/*
- * Structure for IDT77105_GETSTAT and IDT77105_GETSTATZ ioctls.
- * Pointed to by `arg' in atmif_sioc.
- */
-struct idt77105_stats {
-        __u32 symbol_errors;  /* wire symbol errors */
-        __u32 tx_cells;       /* cells transmitted */
-        __u32 rx_cells;       /* cells received */
-        __u32 rx_hec_errors;  /* Header Error Check errors on receive */
-};
-
-#define IDT77105_GETSTAT	_IOW('a',ATMIOC_PHYPRV+2,struct atmif_sioc)	/* get stats */
-#define IDT77105_GETSTATZ	_IOW('a',ATMIOC_PHYPRV+3,struct atmif_sioc)	/* get stats and zero */
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/atm_nicstar.h b/ANDROID_3.4.5/include/linux/atm_nicstar.h
deleted file mode 100644
index 577b79f3..00000000
--- a/ANDROID_3.4.5/include/linux/atm_nicstar.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/******************************************************************************
- *
- * atm_nicstar.h
- *
- * Driver-specific declarations for use by NICSTAR driver specific utils.
- *
- * Author: Rui Prior
- *
- * (C) INESC 1998
- *
- ******************************************************************************/
-
-
-#ifndef LINUX_ATM_NICSTAR_H
-#define LINUX_ATM_NICSTAR_H
-
-/* Note: non-kernel programs including this file must also include
- * sys/types.h for struct timeval
- */
-
-#include <linux/atmapi.h>
-#include <linux/atmioc.h>
-
-#define NS_GETPSTAT	_IOWR('a',ATMIOC_SARPRV+1,struct atmif_sioc)
-						/* get pool statistics */
-#define NS_SETBUFLEV	_IOW('a',ATMIOC_SARPRV+2,struct atmif_sioc)
-						/* set buffer level markers */
-#define NS_ADJBUFLEV	_IO('a',ATMIOC_SARPRV+3)
-						/* adjust buffer level */
-
-typedef struct buf_nr
-{
-   unsigned min;
-   unsigned init;
-   unsigned max;
-}buf_nr;
-
-
-typedef struct pool_levels
-{
-   int buftype;
-   int count;		/* (At least for now) only used in NS_GETPSTAT */
-   buf_nr level;
-} pool_levels;
-
-/* type must be one of the following: */
-#define NS_BUFTYPE_SMALL 1
-#define NS_BUFTYPE_LARGE 2
-#define NS_BUFTYPE_HUGE 3
-#define NS_BUFTYPE_IOVEC 4
-
-
-#endif /* LINUX_ATM_NICSTAR_H */
diff --git a/ANDROID_3.4.5/include/linux/atm_suni.h b/ANDROID_3.4.5/include/linux/atm_suni.h
deleted file mode 100644
index 84f3aab5..00000000
--- a/ANDROID_3.4.5/include/linux/atm_suni.h
+++ /dev/null
@@ -1,12 +0,0 @@
-/* atm_suni.h - Driver-specific declarations of the SUNI driver (for use by
-		driver-specific utilities) */
-
-/* Written 1998,2000 by Werner Almesberger, EPFL ICA */
-
-
-#ifndef LINUX_ATM_SUNI_H
-#define LINUX_ATM_SUNI_H
-
-/* everything obsoleted */
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/atm_tcp.h b/ANDROID_3.4.5/include/linux/atm_tcp.h
deleted file mode 100644
index 375638f8..00000000
--- a/ANDROID_3.4.5/include/linux/atm_tcp.h
+++ /dev/null
@@ -1,73 +0,0 @@
-/* atm_tcp.h - Driver-specific declarations of the ATMTCP driver (for use by
-	       driver-specific utilities) */
-
-/* Written 1997-2000 by Werner Almesberger, EPFL LRC/ICA */
-
-
-#ifndef LINUX_ATM_TCP_H
-#define LINUX_ATM_TCP_H
-
-#include <linux/atmapi.h>
-#include <linux/atm.h>
-#include <linux/atmioc.h>
-#include <linux/types.h>
-
-
-/*
- * All values in struct atmtcp_hdr are in network byte order
- */
-
-struct atmtcp_hdr {
-	__u16	vpi;
-	__u16	vci;
-	__u32	length;		/* ... of data part */
-};
-
-/*
- * All values in struct atmtcp_command are in host byte order
- */
-
-#define ATMTCP_HDR_MAGIC	(~0)	/* this length indicates a command */
-#define ATMTCP_CTRL_OPEN	1	/* request/reply */
-#define ATMTCP_CTRL_CLOSE	2	/* request/reply */
-
-struct atmtcp_control {
-	struct atmtcp_hdr hdr;	/* must be first */
-	int type;		/* message type; both directions */
-	atm_kptr_t vcc;		/* both directions */
-	struct sockaddr_atmpvc addr; /* suggested value from kernel */
-	struct atm_qos	qos;	/* both directions */
-	int result;		/* to kernel only */
-} __ATM_API_ALIGN;
-
-/*
- * Field usage:
- * Messge type	dir.	hdr.v?i	type	addr	qos	vcc	result
- * -----------  ----	------- ----	----	---	---	------
- * OPEN		K->D	Y	Y	Y	Y	Y	0
- * OPEN		D->K	-	Y	Y	Y	Y	Y
- * CLOSE	K->D	-	-	Y	-	Y	0
- * CLOSE	D->K	-	-	-	-	Y	Y
- */
-
-#define SIOCSIFATMTCP	_IO('a',ATMIOC_ITF)	/* set ATMTCP mode */
-#define ATMTCP_CREATE	_IO('a',ATMIOC_ITF+14)	/* create persistent ATMTCP
-						   interface */
-#define ATMTCP_REMOVE	_IO('a',ATMIOC_ITF+15)	/* destroy persistent ATMTCP
-						   interface */
-
-
-#ifdef __KERNEL__
-
-struct atm_tcp_ops {
-	int (*attach)(struct atm_vcc *vcc,int itf);
-	int (*create_persistent)(int itf);
-	int (*remove_persistent)(int itf);
-	struct module *owner;
-};
-
-extern struct atm_tcp_ops atm_tcp_ops;
-
-#endif
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/atm_zatm.h b/ANDROID_3.4.5/include/linux/atm_zatm.h
deleted file mode 100644
index 10f0fa29..00000000
--- a/ANDROID_3.4.5/include/linux/atm_zatm.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/* atm_zatm.h - Driver-specific declarations of the ZATM driver (for use by
-		driver-specific utilities) */
-
-/* Written 1995-1999 by Werner Almesberger, EPFL LRC/ICA */
-
-
-#ifndef LINUX_ATM_ZATM_H
-#define LINUX_ATM_ZATM_H
-
-/*
- * Note: non-kernel programs including this file must also include
- * sys/types.h for struct timeval
- */
-
-#include <linux/atmapi.h>
-#include <linux/atmioc.h>
-
-#define ZATM_GETPOOL	_IOW('a',ATMIOC_SARPRV+1,struct atmif_sioc)
-						/* get pool statistics */
-#define ZATM_GETPOOLZ	_IOW('a',ATMIOC_SARPRV+2,struct atmif_sioc)
-						/* get statistics and zero */
-#define ZATM_SETPOOL	_IOW('a',ATMIOC_SARPRV+3,struct atmif_sioc)
-						/* set pool parameters */
-
-struct zatm_pool_info {
-	int ref_count;			/* free buffer pool usage counters */
-	int low_water,high_water;	/* refill parameters */
-	int rqa_count,rqu_count;	/* queue condition counters */
-	int offset,next_off;		/* alignment optimizations: offset */
-	int next_cnt,next_thres;	/* repetition counter and threshold */
-};
-
-struct zatm_pool_req {
-	int pool_num;			/* pool number */
-	struct zatm_pool_info info;	/* actual information */
-};
-
-struct zatm_t_hist {
-	struct timeval real;		/* real (wall-clock) time */
-	struct timeval expected;	/* expected real time */
-};
-
-
-#define ZATM_OAM_POOL		0	/* free buffer pool for OAM cells */
-#define ZATM_AAL0_POOL		1	/* free buffer pool for AAL0 cells */
-#define ZATM_AAL5_POOL_BASE	2	/* first AAL5 free buffer pool */
-#define ZATM_LAST_POOL	ZATM_AAL5_POOL_BASE+10 /* max. 64 kB */
-
-#define ZATM_TIMER_HISTORY_SIZE	16	/* number of timer adjustments to
-					   record; must be 2^n */
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/atmapi.h b/ANDROID_3.4.5/include/linux/atmapi.h
deleted file mode 100644
index 8fe54d90..00000000
--- a/ANDROID_3.4.5/include/linux/atmapi.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/* atmapi.h - ATM API user space/kernel compatibility */
- 
-/* Written 1999,2000 by Werner Almesberger, EPFL ICA */
- 
-
-#ifndef _LINUX_ATMAPI_H
-#define _LINUX_ATMAPI_H
-
-#if defined(__sparc__) || defined(__ia64__)
-/* such alignment is not required on 32 bit sparcs, but we can't
-   figure that we are on a sparc64 while compiling user-space programs. */
-#define __ATM_API_ALIGN	__attribute__((aligned(8)))
-#else
-#define __ATM_API_ALIGN
-#endif
-
-
-/*
- * Opaque type for kernel pointers. Note that _ is never accessed. We need
- * the struct in order hide the array, so that we can make simple assignments
- * instead of being forced to use memcpy. It also improves error reporting for
- * code that still assumes that we're passing unsigned longs.
- *
- * Convention: NULL pointers are passed as a field of all zeroes.
- */
- 
-typedef struct { unsigned char _[8]; } __ATM_API_ALIGN atm_kptr_t;
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/atmarp.h b/ANDROID_3.4.5/include/linux/atmarp.h
deleted file mode 100644
index 231f4bde..00000000
--- a/ANDROID_3.4.5/include/linux/atmarp.h
+++ /dev/null
@@ -1,41 +0,0 @@
-/* atmarp.h - ATM ARP protocol and kernel-demon interface definitions */
- 
-/* Written 1995-1999 by Werner Almesberger, EPFL LRC/ICA */
- 
-
-#ifndef _LINUX_ATMARP_H
-#define _LINUX_ATMARP_H
-
-#include <linux/types.h>
-#include <linux/atmapi.h>
-#include <linux/atmioc.h>
-
-
-#define ATMARP_RETRY_DELAY 30		/* request next resolution or forget
-					   NAK after 30 sec - should go into
-					   atmclip.h */
-#define ATMARP_MAX_UNRES_PACKETS 5	/* queue that many packets while
-					   waiting for the resolver */
-
-
-#define ATMARPD_CTRL	_IO('a',ATMIOC_CLIP+1)	/* become atmarpd ctrl sock */
-#define ATMARP_MKIP	_IO('a',ATMIOC_CLIP+2)	/* attach socket to IP */
-#define ATMARP_SETENTRY	_IO('a',ATMIOC_CLIP+3)	/* fill or hide ARP entry */
-#define ATMARP_ENCAP	_IO('a',ATMIOC_CLIP+5)	/* change encapsulation */
-
-
-enum atmarp_ctrl_type {
-	act_invalid,		/* catch uninitialized structures */
-	act_need,		/* need address resolution */
-	act_up,			/* interface is coming up */
-	act_down,		/* interface is going down */
-	act_change		/* interface configuration has changed */
-};
-
-struct atmarp_ctrl {
-	enum atmarp_ctrl_type	type;	/* message type */
-	int			itf_num;/* interface number (if present) */
-	__be32			ip;	/* IP address (act_need only) */
-};
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/atmbr2684.h b/ANDROID_3.4.5/include/linux/atmbr2684.h
deleted file mode 100644
index fdb2629b..00000000
--- a/ANDROID_3.4.5/include/linux/atmbr2684.h
+++ /dev/null
@@ -1,117 +0,0 @@
-#ifndef _LINUX_ATMBR2684_H
-#define _LINUX_ATMBR2684_H
-
-#include <linux/types.h>
-#include <linux/atm.h>
-#include <linux/if.h>		/* For IFNAMSIZ */
-
-/*
- * Type of media we're bridging (ethernet, token ring, etc)  Currently only
- * ethernet is supported
- */
-#define BR2684_MEDIA_ETHERNET	(0)	/* 802.3 */
-#define BR2684_MEDIA_802_4	(1)	/* 802.4 */
-#define BR2684_MEDIA_TR		(2)	/* 802.5 - token ring */
-#define BR2684_MEDIA_FDDI	(3)
-#define BR2684_MEDIA_802_6	(4)	/* 802.6 */
-
-					/* used only at device creation:  */
-#define BR2684_FLAG_ROUTED	(1<<16)	/* payload is routed, not bridged */
-
-/*
- * Is there FCS inbound on this VC?  This currently isn't supported.
- */
-#define BR2684_FCSIN_NO		(0)
-#define BR2684_FCSIN_IGNORE	(1)
-#define BR2684_FCSIN_VERIFY	(2)
-
-/*
- * Is there FCS outbound on this VC?  This currently isn't supported.
- */
-#define BR2684_FCSOUT_NO	(0)
-#define BR2684_FCSOUT_SENDZERO	(1)
-#define BR2684_FCSOUT_GENERATE	(2)
-
-/*
- * Does this VC include LLC encapsulation?
- */
-#define BR2684_ENCAPS_VC	(0)	/* VC-mux */
-#define BR2684_ENCAPS_LLC	(1)
-#define BR2684_ENCAPS_AUTODETECT (2)	/* Unsuported */
-
-/*
- * Is this VC bridged or routed?
- */
-
-#define BR2684_PAYLOAD_ROUTED   (0)
-#define BR2684_PAYLOAD_BRIDGED  (1)
-
-/*
- * This is for the ATM_NEWBACKENDIF call - these are like socket families:
- * the first element of the structure is the backend number and the rest
- * is per-backend specific
- */
-struct atm_newif_br2684 {
-	atm_backend_t backend_num;	/* ATM_BACKEND_BR2684 */
-	int media;		/* BR2684_MEDIA_*, flags in upper bits */
-	char ifname[IFNAMSIZ];
-	int mtu;
-};
-
-/*
- * This structure is used to specify a br2684 interface - either by a
- * positive integer (returned by ATM_NEWBACKENDIF) or the interfaces name
- */
-#define BR2684_FIND_BYNOTHING	(0)
-#define BR2684_FIND_BYNUM	(1)
-#define BR2684_FIND_BYIFNAME	(2)
-struct br2684_if_spec {
-	int method;		/* BR2684_FIND_* */
-	union {
-		char ifname[IFNAMSIZ];
-		int devnum;
-	} spec;
-};
-
-/*
- * This is for the ATM_SETBACKEND call - these are like socket families:
- * the first element of the structure is the backend number and the rest
- * is per-backend specific
- */
-struct atm_backend_br2684 {
-	atm_backend_t backend_num;	/* ATM_BACKEND_BR2684 */
-	struct br2684_if_spec ifspec;
-	int fcs_in;		/* BR2684_FCSIN_* */
-	int fcs_out;		/* BR2684_FCSOUT_* */
-	int fcs_auto;		/* 1: fcs_{in,out} disabled if no FCS rx'ed */
-	int encaps;		/* BR2684_ENCAPS_* */
-	int has_vpiid;		/* 1: use vpn_id - Unsupported */
-	__u8 vpn_id[7];
-	int send_padding;	/* unsupported */
-	int min_size;		/* we will pad smaller packets than this */
-};
-
-/*
- * The BR2684_SETFILT ioctl is an experimental mechanism for folks
- * terminating a large number of IP-only vcc's.  When netfilter allows
- * efficient per-if in/out filters, this support will be removed
- */
-struct br2684_filter {
-	__be32 prefix;		/* network byte order */
-	__be32 netmask;		/* 0 = disable filter */
-};
-
-struct br2684_filter_set {
-	struct br2684_if_spec ifspec;
-	struct br2684_filter filter;
-};
-
-enum br2684_payload {
-	p_routed = BR2684_PAYLOAD_ROUTED,
-	p_bridged = BR2684_PAYLOAD_BRIDGED,
-};
-
-#define BR2684_SETFILT	_IOW( 'a', ATMIOC_BACKEND + 0, \
-				struct br2684_filter_set)
-
-#endif /* _LINUX_ATMBR2684_H */
diff --git a/ANDROID_3.4.5/include/linux/atmclip.h b/ANDROID_3.4.5/include/linux/atmclip.h
deleted file mode 100644
index 02c94c44..00000000
--- a/ANDROID_3.4.5/include/linux/atmclip.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/* atmclip.h - Classical IP over ATM */
- 
-/* Written 1995-1998 by Werner Almesberger, EPFL LRC/ICA */
- 
-
-#ifndef LINUX_ATMCLIP_H
-#define LINUX_ATMCLIP_H
-
-#include <linux/sockios.h>
-#include <linux/atmioc.h>
-
-
-#define RFC1483LLC_LEN	8		/* LLC+OUI+PID = 8 */
-#define RFC1626_MTU	9180		/* RFC1626 default MTU */
-
-#define CLIP_DEFAULT_IDLETIMER 1200	/* 20 minutes, see RFC1755 */
-#define CLIP_CHECK_INTERVAL	 10	/* check every ten seconds */
-
-#define	SIOCMKCLIP	_IO('a',ATMIOC_CLIP)	/* create IP interface */
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/atmdev.h b/ANDROID_3.4.5/include/linux/atmdev.h
deleted file mode 100644
index 06fd4bbc..00000000
--- a/ANDROID_3.4.5/include/linux/atmdev.h
+++ /dev/null
@@ -1,526 +0,0 @@
-/* atmdev.h - ATM device driver declarations and various related items */
- 
-/* Written 1995-2000 by Werner Almesberger, EPFL LRC/ICA */
- 
-
-#ifndef LINUX_ATMDEV_H
-#define LINUX_ATMDEV_H
-
-
-#include <linux/atmapi.h>
-#include <linux/atm.h>
-#include <linux/atmioc.h>
-
-
-#define ESI_LEN		6
-
-#define ATM_OC3_PCR	(155520000/270*260/8/53)
-			/* OC3 link rate:  155520000 bps
-			   SONET overhead: /270*260 (9 section, 1 path)
-			   bits per cell:  /8/53
-			   max cell rate:  353207.547 cells/sec */
-#define ATM_25_PCR	((25600000/8-8000)/54)
-			/* 25 Mbps ATM cell rate (59111) */
-#define ATM_OC12_PCR	(622080000/1080*1040/8/53)
-			/* OC12 link rate: 622080000 bps
-			   SONET overhead: /1080*1040
-			   bits per cell:  /8/53
-			   max cell rate:  1412830.188 cells/sec */
-#define ATM_DS3_PCR	(8000*12)
-			/* DS3: 12 cells in a 125 usec time slot */
-
-
-#define __AAL_STAT_ITEMS \
-    __HANDLE_ITEM(tx);			/* TX okay */ \
-    __HANDLE_ITEM(tx_err);		/* TX errors */ \
-    __HANDLE_ITEM(rx);			/* RX okay */ \
-    __HANDLE_ITEM(rx_err);		/* RX errors */ \
-    __HANDLE_ITEM(rx_drop);		/* RX out of memory */
-
-struct atm_aal_stats {
-#define __HANDLE_ITEM(i) int i
-	__AAL_STAT_ITEMS
-#undef __HANDLE_ITEM
-};
-
-
-struct atm_dev_stats {
-	struct atm_aal_stats aal0;
-	struct atm_aal_stats aal34;
-	struct atm_aal_stats aal5;
-} __ATM_API_ALIGN;
-
-
-#define ATM_GETLINKRATE	_IOW('a',ATMIOC_ITF+1,struct atmif_sioc)
-					/* get link rate */
-#define ATM_GETNAMES	_IOW('a',ATMIOC_ITF+3,struct atm_iobuf)
-					/* get interface names (numbers) */
-#define ATM_GETTYPE	_IOW('a',ATMIOC_ITF+4,struct atmif_sioc)
-					/* get interface type name */
-#define ATM_GETESI	_IOW('a',ATMIOC_ITF+5,struct atmif_sioc)
-					/* get interface ESI */
-#define ATM_GETADDR	_IOW('a',ATMIOC_ITF+6,struct atmif_sioc)
-					/* get itf's local ATM addr. list */
-#define ATM_RSTADDR	_IOW('a',ATMIOC_ITF+7,struct atmif_sioc)
-					/* reset itf's ATM address list */
-#define ATM_ADDADDR	_IOW('a',ATMIOC_ITF+8,struct atmif_sioc)
-					/* add a local ATM address */
-#define ATM_DELADDR	_IOW('a',ATMIOC_ITF+9,struct atmif_sioc)
-					/* remove a local ATM address */
-#define ATM_GETCIRANGE	_IOW('a',ATMIOC_ITF+10,struct atmif_sioc)
-					/* get connection identifier range */
-#define ATM_SETCIRANGE	_IOW('a',ATMIOC_ITF+11,struct atmif_sioc)
-					/* set connection identifier range */
-#define ATM_SETESI	_IOW('a',ATMIOC_ITF+12,struct atmif_sioc)
-					/* set interface ESI */
-#define ATM_SETESIF	_IOW('a',ATMIOC_ITF+13,struct atmif_sioc)
-					/* force interface ESI */
-#define ATM_ADDLECSADDR	_IOW('a', ATMIOC_ITF+14, struct atmif_sioc)
-					/* register a LECS address */
-#define ATM_DELLECSADDR	_IOW('a', ATMIOC_ITF+15, struct atmif_sioc)
-					/* unregister a LECS address */
-#define ATM_GETLECSADDR	_IOW('a', ATMIOC_ITF+16, struct atmif_sioc)
-					/* retrieve LECS address(es) */
-
-#define ATM_GETSTAT	_IOW('a',ATMIOC_SARCOM+0,struct atmif_sioc)
-					/* get AAL layer statistics */
-#define ATM_GETSTATZ	_IOW('a',ATMIOC_SARCOM+1,struct atmif_sioc)
-					/* get AAL layer statistics and zero */
-#define ATM_GETLOOP	_IOW('a',ATMIOC_SARCOM+2,struct atmif_sioc)
-					/* get loopback mode */
-#define ATM_SETLOOP	_IOW('a',ATMIOC_SARCOM+3,struct atmif_sioc)
-					/* set loopback mode */
-#define ATM_QUERYLOOP	_IOW('a',ATMIOC_SARCOM+4,struct atmif_sioc)
-					/* query supported loopback modes */
-#define ATM_SETSC	_IOW('a',ATMIOC_SPECIAL+1,int)
-					/* enable or disable single-copy */
-#define ATM_SETBACKEND	_IOW('a',ATMIOC_SPECIAL+2,atm_backend_t)
-					/* set backend handler */
-#define ATM_NEWBACKENDIF _IOW('a',ATMIOC_SPECIAL+3,atm_backend_t)
-					/* use backend to make new if */
-#define ATM_ADDPARTY  	_IOW('a', ATMIOC_SPECIAL+4,struct atm_iobuf)
- 					/* add party to p2mp call */
-#ifdef CONFIG_COMPAT
-/* It actually takes struct sockaddr_atmsvc, not struct atm_iobuf */
-#define COMPAT_ATM_ADDPARTY  	_IOW('a', ATMIOC_SPECIAL+4,struct compat_atm_iobuf)
-#endif
-#define ATM_DROPPARTY 	_IOW('a', ATMIOC_SPECIAL+5,int)
-					/* drop party from p2mp call */
-
-/*
- * These are backend handkers that can be set via the ATM_SETBACKEND call
- * above.  In the future we may support dynamic loading of these - for now,
- * they're just being used to share the ATMIOC_BACKEND ioctls
- */
-#define ATM_BACKEND_RAW		0	
-#define ATM_BACKEND_PPP		1	/* PPPoATM - RFC2364 */
-#define ATM_BACKEND_BR2684	2	/* Bridged RFC1483/2684 */
-
-/* for ATM_GETTYPE */
-#define ATM_ITFTYP_LEN	8	/* maximum length of interface type name */
-
-/*
- * Loopback modes for ATM_{PHY,SAR}_{GET,SET}LOOP
- */
-
-/* Point of loopback				CPU-->SAR-->PHY-->line--> ... */
-#define __ATM_LM_NONE	0	/* no loop back     ^     ^     ^      ^      */
-#define __ATM_LM_AAL	1	/* loop back PDUs --'     |     |      |      */
-#define __ATM_LM_ATM	2	/* loop back ATM cells ---'     |      |      */
-/* RESERVED		4	loop back on PHY side  ---'		      */
-#define __ATM_LM_PHY	8	/* loop back bits (digital) ----'      |      */
-#define __ATM_LM_ANALOG 16	/* loop back the analog signal --------'      */
-
-/* Direction of loopback */
-#define __ATM_LM_MKLOC(n)	((n))	    /* Local (i.e. loop TX to RX) */
-#define __ATM_LM_MKRMT(n)	((n) << 8)  /* Remote (i.e. loop RX to TX) */
-
-#define __ATM_LM_XTLOC(n)	((n) & 0xff)
-#define __ATM_LM_XTRMT(n)	(((n) >> 8) & 0xff)
-
-#define ATM_LM_NONE	0	/* no loopback */
-
-#define ATM_LM_LOC_AAL	__ATM_LM_MKLOC(__ATM_LM_AAL)
-#define ATM_LM_LOC_ATM	__ATM_LM_MKLOC(__ATM_LM_ATM)
-#define ATM_LM_LOC_PHY	__ATM_LM_MKLOC(__ATM_LM_PHY)
-#define ATM_LM_LOC_ANALOG __ATM_LM_MKLOC(__ATM_LM_ANALOG)
-
-#define ATM_LM_RMT_AAL	__ATM_LM_MKRMT(__ATM_LM_AAL)
-#define ATM_LM_RMT_ATM	__ATM_LM_MKRMT(__ATM_LM_ATM)
-#define ATM_LM_RMT_PHY	__ATM_LM_MKRMT(__ATM_LM_PHY)
-#define ATM_LM_RMT_ANALOG __ATM_LM_MKRMT(__ATM_LM_ANALOG)
-
-/*
- * Note: ATM_LM_LOC_* and ATM_LM_RMT_* can be combined, provided that
- * __ATM_LM_XTLOC(x) <= __ATM_LM_XTRMT(x)
- */
-
-
-struct atm_iobuf {
-	int length;
-	void __user *buffer;
-};
-
-/* for ATM_GETCIRANGE / ATM_SETCIRANGE */
-
-#define ATM_CI_MAX      -1              /* use maximum range of VPI/VCI */
- 
-struct atm_cirange {
-	signed char	vpi_bits;	/* 1..8, ATM_CI_MAX (-1) for maximum */
-	signed char	vci_bits;	/* 1..16, ATM_CI_MAX (-1) for maximum */
-};
-
-/* for ATM_SETSC; actually taken from the ATM_VF number space */
-
-#define ATM_SC_RX	1024		/* enable RX single-copy */
-#define ATM_SC_TX	2048		/* enable TX single-copy */
-
-#define ATM_BACKLOG_DEFAULT 32 /* if we get more, we're likely to time out
-				  anyway */
-
-/* MF: change_qos (Modify) flags */
-
-#define ATM_MF_IMMED	 1	/* Block until change is effective */
-#define ATM_MF_INC_RSV	 2	/* Change reservation on increase */
-#define ATM_MF_INC_SHP	 4	/* Change shaping on increase */
-#define ATM_MF_DEC_RSV	 8	/* Change reservation on decrease */
-#define ATM_MF_DEC_SHP	16	/* Change shaping on decrease */
-#define ATM_MF_BWD	32	/* Set the backward direction parameters */
-
-#define ATM_MF_SET	(ATM_MF_INC_RSV | ATM_MF_INC_SHP | ATM_MF_DEC_RSV | \
-			  ATM_MF_DEC_SHP | ATM_MF_BWD)
-
-/*
- * ATM_VS_* are used to express VC state in a human-friendly way.
- */
-
-#define ATM_VS_IDLE	0	/* VC is not used */
-#define ATM_VS_CONNECTED 1	/* VC is connected */
-#define ATM_VS_CLOSING	2	/* VC is closing */
-#define ATM_VS_LISTEN	3	/* VC is listening for incoming setups */
-#define ATM_VS_INUSE	4	/* VC is in use (registered with atmsigd) */
-#define ATM_VS_BOUND	5	/* VC is bound */
-
-#define ATM_VS2TXT_MAP \
-    "IDLE", "CONNECTED", "CLOSING", "LISTEN", "INUSE", "BOUND"
-
-#define ATM_VF2TXT_MAP \
-    "ADDR",	"READY",	"PARTIAL",	"REGIS", \
-    "RELEASED", "HASQOS",	"LISTEN",	"META", \
-    "256",	"512",		"1024",		"2048", \
-    "SESSION",	"HASSAP",	"BOUND",	"CLOSE"
-
-
-#ifdef __KERNEL__
-
-#include <linux/wait.h> /* wait_queue_head_t */
-#include <linux/time.h> /* struct timeval */
-#include <linux/net.h>
-#include <linux/bug.h>
-#include <linux/skbuff.h> /* struct sk_buff */
-#include <linux/uio.h>
-#include <net/sock.h>
-#include <linux/atomic.h>
-
-#ifdef CONFIG_PROC_FS
-#include <linux/proc_fs.h>
-
-extern struct proc_dir_entry *atm_proc_root;
-#endif
-
-#ifdef CONFIG_COMPAT
-#include <linux/compat.h>
-struct compat_atm_iobuf {
-	int length;
-	compat_uptr_t buffer;
-};
-#endif
-
-struct k_atm_aal_stats {
-#define __HANDLE_ITEM(i) atomic_t i
-	__AAL_STAT_ITEMS
-#undef __HANDLE_ITEM
-};
-
-
-struct k_atm_dev_stats {
-	struct k_atm_aal_stats aal0;
-	struct k_atm_aal_stats aal34;
-	struct k_atm_aal_stats aal5;
-};
-
-struct device;
-
-enum {
-	ATM_VF_ADDR,		/* Address is in use. Set by anybody, cleared
-				   by device driver. */
-	ATM_VF_READY,		/* VC is ready to transfer data. Set by device
-				   driver, cleared by anybody. */
-	ATM_VF_PARTIAL,		/* resources are bound to PVC (partial PVC
-				   setup), controlled by socket layer */
-	ATM_VF_REGIS,		/* registered with demon, controlled by SVC
-				   socket layer */
-	ATM_VF_BOUND,		/* local SAP is set, controlled by SVC socket
-				   layer */
-	ATM_VF_RELEASED,	/* demon has indicated/requested release,
-				   controlled by SVC socket layer */
-	ATM_VF_HASQOS,		/* QOS parameters have been set */
-	ATM_VF_LISTEN,		/* socket is used for listening */
-	ATM_VF_META,		/* SVC socket isn't used for normal data
-				   traffic and doesn't depend on signaling
-				   to be available */
-	ATM_VF_SESSION,		/* VCC is p2mp session control descriptor */
-	ATM_VF_HASSAP,		/* SAP has been set */
-	ATM_VF_CLOSE,		/* asynchronous close - treat like VF_RELEASED*/
-	ATM_VF_WAITING,		/* waiting for reply from sigd */
-	ATM_VF_IS_CLIP,		/* in use by CLIP protocol */
-};
-
-
-#define ATM_VF2VS(flags) \
-    (test_bit(ATM_VF_READY,&(flags)) ? ATM_VS_CONNECTED : \
-     test_bit(ATM_VF_RELEASED,&(flags)) ? ATM_VS_CLOSING : \
-     test_bit(ATM_VF_LISTEN,&(flags)) ? ATM_VS_LISTEN : \
-     test_bit(ATM_VF_REGIS,&(flags)) ? ATM_VS_INUSE : \
-     test_bit(ATM_VF_BOUND,&(flags)) ? ATM_VS_BOUND : ATM_VS_IDLE)
-
-
-enum {
-	ATM_DF_REMOVED,		/* device was removed from atm_devs list */
-};
-
-
-#define ATM_PHY_SIG_LOST    0	/* no carrier/light */
-#define ATM_PHY_SIG_UNKNOWN 1	/* carrier/light status is unknown */
-#define ATM_PHY_SIG_FOUND   2	/* carrier/light okay */
-
-#define ATM_ATMOPT_CLP	1	/* set CLP bit */
-
-struct atm_vcc {
-	/* struct sock has to be the first member of atm_vcc */
-	struct sock	sk;
-	unsigned long	flags;		/* VCC flags (ATM_VF_*) */
-	short		vpi;		/* VPI and VCI (types must be equal */
-					/* with sockaddr) */
-	int 		vci;
-	unsigned long	aal_options;	/* AAL layer options */
-	unsigned long	atm_options;	/* ATM layer options */
-	struct atm_dev	*dev;		/* device back pointer */
-	struct atm_qos	qos;		/* QOS */
-	struct atm_sap	sap;		/* SAP */
-	void (*push)(struct atm_vcc *vcc,struct sk_buff *skb);
-	void (*pop)(struct atm_vcc *vcc,struct sk_buff *skb); /* optional */
-	int (*push_oam)(struct atm_vcc *vcc,void *cell);
-	int (*send)(struct atm_vcc *vcc,struct sk_buff *skb);
-	void		*dev_data;	/* per-device data */
-	void		*proto_data;	/* per-protocol data */
-	struct k_atm_aal_stats *stats;	/* pointer to AAL stats group */
-	/* SVC part --- may move later ------------------------------------- */
-	short		itf;		/* interface number */
-	struct sockaddr_atmsvc local;
-	struct sockaddr_atmsvc remote;
-	/* Multipoint part ------------------------------------------------- */
-	struct atm_vcc	*session;	/* session VCC descriptor */
-	/* Other stuff ----------------------------------------------------- */
-	void		*user_back;	/* user backlink - not touched by */
-					/* native ATM stack. Currently used */
-					/* by CLIP and sch_atm. */
-};
-
-static inline struct atm_vcc *atm_sk(struct sock *sk)
-{
-	return (struct atm_vcc *)sk;
-}
-
-static inline struct atm_vcc *ATM_SD(struct socket *sock)
-{
-	return atm_sk(sock->sk);
-}
-
-static inline struct sock *sk_atm(struct atm_vcc *vcc)
-{
-	return (struct sock *)vcc;
-}
-
-struct atm_dev_addr {
-	struct sockaddr_atmsvc addr;	/* ATM address */
-	struct list_head entry;		/* next address */
-};
-
-enum atm_addr_type_t { ATM_ADDR_LOCAL, ATM_ADDR_LECS };
-
-struct atm_dev {
-	const struct atmdev_ops *ops;	/* device operations; NULL if unused */
-	const struct atmphy_ops *phy;	/* PHY operations, may be undefined */
-					/* (NULL) */
-	const char	*type;		/* device type name */
-	int		number;		/* device index */
-	void		*dev_data;	/* per-device data */
-	void		*phy_data;	/* private PHY date */
-	unsigned long	flags;		/* device flags (ATM_DF_*) */
-	struct list_head local;		/* local ATM addresses */
-	struct list_head lecs;		/* LECS ATM addresses learned via ILMI */
-	unsigned char	esi[ESI_LEN];	/* ESI ("MAC" addr) */
-	struct atm_cirange ci_range;	/* VPI/VCI range */
-	struct k_atm_dev_stats stats;	/* statistics */
-	char		signal;		/* signal status (ATM_PHY_SIG_*) */
-	int		link_rate;	/* link rate (default: OC3) */
-	atomic_t	refcnt;		/* reference count */
-	spinlock_t	lock;		/* protect internal members */
-#ifdef CONFIG_PROC_FS
-	struct proc_dir_entry *proc_entry; /* proc entry */
-	char *proc_name;		/* proc entry name */
-#endif
-	struct device class_dev;	/* sysfs device */
-	struct list_head dev_list;	/* linkage */
-};
-
- 
-/* OF: send_Oam Flags */
-
-#define ATM_OF_IMMED  1		/* Attempt immediate delivery */
-#define ATM_OF_INRATE 2		/* Attempt in-rate delivery */
-
-
-/*
- * ioctl, getsockopt, and setsockopt are optional and can be set to NULL.
- */
-
-struct atmdev_ops { /* only send is required */
-	void (*dev_close)(struct atm_dev *dev);
-	int (*open)(struct atm_vcc *vcc);
-	void (*close)(struct atm_vcc *vcc);
-	int (*ioctl)(struct atm_dev *dev,unsigned int cmd,void __user *arg);
-#ifdef CONFIG_COMPAT
-	int (*compat_ioctl)(struct atm_dev *dev,unsigned int cmd,
-			    void __user *arg);
-#endif
-	int (*getsockopt)(struct atm_vcc *vcc,int level,int optname,
-	    void __user *optval,int optlen);
-	int (*setsockopt)(struct atm_vcc *vcc,int level,int optname,
-	    void __user *optval,unsigned int optlen);
-	int (*send)(struct atm_vcc *vcc,struct sk_buff *skb);
-	int (*send_oam)(struct atm_vcc *vcc,void *cell,int flags);
-	void (*phy_put)(struct atm_dev *dev,unsigned char value,
-	    unsigned long addr);
-	unsigned char (*phy_get)(struct atm_dev *dev,unsigned long addr);
-	int (*change_qos)(struct atm_vcc *vcc,struct atm_qos *qos,int flags);
-	int (*proc_read)(struct atm_dev *dev,loff_t *pos,char *page);
-	struct module *owner;
-};
-
-struct atmphy_ops {
-	int (*start)(struct atm_dev *dev);
-	int (*ioctl)(struct atm_dev *dev,unsigned int cmd,void __user *arg);
-	void (*interrupt)(struct atm_dev *dev);
-	int (*stop)(struct atm_dev *dev);
-};
-
-struct atm_skb_data {
-	struct atm_vcc	*vcc;		/* ATM VCC */
-	unsigned long	atm_options;	/* ATM layer options */
-};
-
-#define VCC_HTABLE_SIZE 32
-
-extern struct hlist_head vcc_hash[VCC_HTABLE_SIZE];
-extern rwlock_t vcc_sklist_lock;
-
-#define ATM_SKB(skb) (((struct atm_skb_data *) (skb)->cb))
-
-struct atm_dev *atm_dev_register(const char *type, struct device *parent,
-				 const struct atmdev_ops *ops,
-				 int number, /* -1 == pick first available */
-				 unsigned long *flags);
-struct atm_dev *atm_dev_lookup(int number);
-void atm_dev_deregister(struct atm_dev *dev);
-
-/* atm_dev_signal_change
- *
- * Propagate lower layer signal change in atm_dev->signal to netdevice.
- * The event will be sent via a notifier call chain.
- */
-void atm_dev_signal_change(struct atm_dev *dev, char signal);
-
-void vcc_insert_socket(struct sock *sk);
-
-void atm_dev_release_vccs(struct atm_dev *dev);
-
-
-static inline void atm_force_charge(struct atm_vcc *vcc,int truesize)
-{
-	atomic_add(truesize, &sk_atm(vcc)->sk_rmem_alloc);
-}
-
-
-static inline void atm_return(struct atm_vcc *vcc,int truesize)
-{
-	atomic_sub(truesize, &sk_atm(vcc)->sk_rmem_alloc);
-}
-
-
-static inline int atm_may_send(struct atm_vcc *vcc,unsigned int size)
-{
-	return (size + atomic_read(&sk_atm(vcc)->sk_wmem_alloc)) <
-	       sk_atm(vcc)->sk_sndbuf;
-}
-
-
-static inline void atm_dev_hold(struct atm_dev *dev)
-{
-	atomic_inc(&dev->refcnt);
-}
-
-
-static inline void atm_dev_put(struct atm_dev *dev)
-{
-	if (atomic_dec_and_test(&dev->refcnt)) {
-		BUG_ON(!test_bit(ATM_DF_REMOVED, &dev->flags));
-		if (dev->ops->dev_close)
-			dev->ops->dev_close(dev);
-		put_device(&dev->class_dev);
-	}
-}
-
-
-int atm_charge(struct atm_vcc *vcc,int truesize);
-struct sk_buff *atm_alloc_charge(struct atm_vcc *vcc,int pdu_size,
-    gfp_t gfp_flags);
-int atm_pcr_goal(const struct atm_trafprm *tp);
-
-void vcc_release_async(struct atm_vcc *vcc, int reply);
-
-struct atm_ioctl {
-	struct module *owner;
-	/* A module reference is kept if appropriate over this call.
-	 * Return -ENOIOCTLCMD if you don't handle it. */
-	int (*ioctl)(struct socket *, unsigned int cmd, unsigned long arg);
-	struct list_head list;
-};
-
-/**
- * register_atm_ioctl - register handler for ioctl operations
- *
- * Special (non-device) handlers of ioctl's should
- * register here. If you're a normal device, you should
- * set .ioctl in your atmdev_ops instead.
- */
-void register_atm_ioctl(struct atm_ioctl *);
-
-/**
- * deregister_atm_ioctl - remove the ioctl handler
- */
-void deregister_atm_ioctl(struct atm_ioctl *);
-
-
-/* register_atmdevice_notifier - register atm_dev notify events
- *
- * Clients like br2684 will register notify events
- * Currently we notify of signal found/lost
- */
-int register_atmdevice_notifier(struct notifier_block *nb);
-void unregister_atmdevice_notifier(struct notifier_block *nb);
-
-#endif /* __KERNEL__ */
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/atmel-mci.h b/ANDROID_3.4.5/include/linux/atmel-mci.h
deleted file mode 100644
index 4c7a4b21..00000000
--- a/ANDROID_3.4.5/include/linux/atmel-mci.h
+++ /dev/null
@@ -1,39 +0,0 @@
-#ifndef __LINUX_ATMEL_MCI_H
-#define __LINUX_ATMEL_MCI_H
-
-#define ATMCI_MAX_NR_SLOTS	2
-
-/**
- * struct mci_slot_pdata - board-specific per-slot configuration
- * @bus_width: Number of data lines wired up the slot
- * @detect_pin: GPIO pin wired to the card detect switch
- * @wp_pin: GPIO pin wired to the write protect sensor
- * @detect_is_active_high: The state of the detect pin when it is active
- *
- * If a given slot is not present on the board, @bus_width should be
- * set to 0. The other fields are ignored in this case.
- *
- * Any pins that aren't available should be set to a negative value.
- *
- * Note that support for multiple slots is experimental -- some cards
- * might get upset if we don't get the clock management exactly right.
- * But in most cases, it should work just fine.
- */
-struct mci_slot_pdata {
-	unsigned int		bus_width;
-	int			detect_pin;
-	int			wp_pin;
-	bool			detect_is_active_high;
-};
-
-/**
- * struct mci_platform_data - board-specific MMC/SDcard configuration
- * @dma_slave: DMA slave interface to use in data transfers.
- * @slot: Per-slot configuration data.
- */
-struct mci_platform_data {
-	struct mci_dma_data	*dma_slave;
-	struct mci_slot_pdata	slot[ATMCI_MAX_NR_SLOTS];
-};
-
-#endif /* __LINUX_ATMEL_MCI_H */
diff --git a/ANDROID_3.4.5/include/linux/atmel-pwm-bl.h b/ANDROID_3.4.5/include/linux/atmel-pwm-bl.h
deleted file mode 100644
index 0153a478..00000000
--- a/ANDROID_3.4.5/include/linux/atmel-pwm-bl.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * Copyright (C) 2007 Atmel Corporation
- *
- * Driver for the AT32AP700X PS/2 controller (PSIF).
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#ifndef __INCLUDE_ATMEL_PWM_BL_H
-#define __INCLUDE_ATMEL_PWM_BL_H
-
-/**
- * struct atmel_pwm_bl_platform_data
- * @pwm_channel: which PWM channel in the PWM module to use.
- * @pwm_frequency: PWM frequency to generate, the driver will try to be as
- *	close as the prescaler allows.
- * @pwm_compare_max: value to use in the PWM channel compare register.
- * @pwm_duty_max: maximum duty cycle value, must be less than or equal to
- *	pwm_compare_max.
- * @pwm_duty_min: minimum duty cycle value, must be less than pwm_duty_max.
- * @pwm_active_low: set to one if the low part of the PWM signal increases the
- *	brightness of the backlight.
- * @gpio_on: GPIO line to control the backlight on/off, set to -1 if not used.
- * @on_active_low: set to one if the on/off signal is on when GPIO is low.
- *
- * This struct must be added to the platform device in the board code. It is
- * used by the atmel-pwm-bl driver to setup the GPIO to control on/off and the
- * PWM device.
- */
-struct atmel_pwm_bl_platform_data {
-	unsigned int pwm_channel;
-	unsigned int pwm_frequency;
-	unsigned int pwm_compare_max;
-	unsigned int pwm_duty_max;
-	unsigned int pwm_duty_min;
-	unsigned int pwm_active_low;
-	int gpio_on;
-	unsigned int on_active_low;
-};
-
-#endif /* __INCLUDE_ATMEL_PWM_BL_H */
diff --git a/ANDROID_3.4.5/include/linux/atmel-ssc.h b/ANDROID_3.4.5/include/linux/atmel-ssc.h
deleted file mode 100644
index 06023393..00000000
--- a/ANDROID_3.4.5/include/linux/atmel-ssc.h
+++ /dev/null
@@ -1,312 +0,0 @@
-#ifndef __INCLUDE_ATMEL_SSC_H
-#define __INCLUDE_ATMEL_SSC_H
-
-#include <linux/platform_device.h>
-#include <linux/list.h>
-
-struct ssc_device {
-	struct list_head	list;
-	void __iomem		*regs;
-	struct platform_device	*pdev;
-	struct clk		*clk;
-	int			user;
-	int			irq;
-};
-
-struct ssc_device * __must_check ssc_request(unsigned int ssc_num);
-void ssc_free(struct ssc_device *ssc);
-
-/* SSC register offsets */
-
-/* SSC Control Register */
-#define SSC_CR				0x00000000
-#define SSC_CR_RXDIS_SIZE			 1
-#define SSC_CR_RXDIS_OFFSET			 1
-#define SSC_CR_RXEN_SIZE			 1
-#define SSC_CR_RXEN_OFFSET			 0
-#define SSC_CR_SWRST_SIZE			 1
-#define SSC_CR_SWRST_OFFSET			15
-#define SSC_CR_TXDIS_SIZE			 1
-#define SSC_CR_TXDIS_OFFSET			 9
-#define SSC_CR_TXEN_SIZE			 1
-#define SSC_CR_TXEN_OFFSET			 8
-
-/* SSC Clock Mode Register */
-#define SSC_CMR				0x00000004
-#define SSC_CMR_DIV_SIZE			12
-#define SSC_CMR_DIV_OFFSET			 0
-
-/* SSC Receive Clock Mode Register */
-#define SSC_RCMR			0x00000010
-#define SSC_RCMR_CKG_SIZE			 2
-#define SSC_RCMR_CKG_OFFSET			 6
-#define SSC_RCMR_CKI_SIZE			 1
-#define SSC_RCMR_CKI_OFFSET			 5
-#define SSC_RCMR_CKO_SIZE			 3
-#define SSC_RCMR_CKO_OFFSET			 2
-#define SSC_RCMR_CKS_SIZE			 2
-#define SSC_RCMR_CKS_OFFSET			 0
-#define SSC_RCMR_PERIOD_SIZE			 8
-#define SSC_RCMR_PERIOD_OFFSET			24
-#define SSC_RCMR_START_SIZE			 4
-#define SSC_RCMR_START_OFFSET			 8
-#define SSC_RCMR_STOP_SIZE			 1
-#define SSC_RCMR_STOP_OFFSET			12
-#define SSC_RCMR_STTDLY_SIZE			 8
-#define SSC_RCMR_STTDLY_OFFSET			16
-
-/* SSC Receive Frame Mode Register */
-#define SSC_RFMR			0x00000014
-#define SSC_RFMR_DATLEN_SIZE			 5
-#define SSC_RFMR_DATLEN_OFFSET			 0
-#define SSC_RFMR_DATNB_SIZE			 4
-#define SSC_RFMR_DATNB_OFFSET			 8
-#define SSC_RFMR_FSEDGE_SIZE			 1
-#define SSC_RFMR_FSEDGE_OFFSET			24
-#define SSC_RFMR_FSLEN_SIZE			 4
-#define SSC_RFMR_FSLEN_OFFSET			16
-#define SSC_RFMR_FSOS_SIZE			 4
-#define SSC_RFMR_FSOS_OFFSET			20
-#define SSC_RFMR_LOOP_SIZE			 1
-#define SSC_RFMR_LOOP_OFFSET			 5
-#define SSC_RFMR_MSBF_SIZE			 1
-#define SSC_RFMR_MSBF_OFFSET			 7
-
-/* SSC Transmit Clock Mode Register */
-#define SSC_TCMR			0x00000018
-#define SSC_TCMR_CKG_SIZE			 2
-#define SSC_TCMR_CKG_OFFSET			 6
-#define SSC_TCMR_CKI_SIZE			 1
-#define SSC_TCMR_CKI_OFFSET			 5
-#define SSC_TCMR_CKO_SIZE			 3
-#define SSC_TCMR_CKO_OFFSET			 2
-#define SSC_TCMR_CKS_SIZE			 2
-#define SSC_TCMR_CKS_OFFSET			 0
-#define SSC_TCMR_PERIOD_SIZE			 8
-#define SSC_TCMR_PERIOD_OFFSET			24
-#define SSC_TCMR_START_SIZE			 4
-#define SSC_TCMR_START_OFFSET			 8
-#define SSC_TCMR_STTDLY_SIZE			 8
-#define SSC_TCMR_STTDLY_OFFSET			16
-
-/* SSC Transmit Frame Mode Register */
-#define SSC_TFMR			0x0000001c
-#define SSC_TFMR_DATDEF_SIZE			 1
-#define SSC_TFMR_DATDEF_OFFSET			 5
-#define SSC_TFMR_DATLEN_SIZE			 5
-#define SSC_TFMR_DATLEN_OFFSET			 0
-#define SSC_TFMR_DATNB_SIZE			 4
-#define SSC_TFMR_DATNB_OFFSET			 8
-#define SSC_TFMR_FSDEN_SIZE			 1
-#define SSC_TFMR_FSDEN_OFFSET			23
-#define SSC_TFMR_FSEDGE_SIZE			 1
-#define SSC_TFMR_FSEDGE_OFFSET			24
-#define SSC_TFMR_FSLEN_SIZE			 4
-#define SSC_TFMR_FSLEN_OFFSET			16
-#define SSC_TFMR_FSOS_SIZE			 3
-#define SSC_TFMR_FSOS_OFFSET			20
-#define SSC_TFMR_MSBF_SIZE			 1
-#define SSC_TFMR_MSBF_OFFSET			 7
-
-/* SSC Receive Hold Register */
-#define SSC_RHR				0x00000020
-#define SSC_RHR_RDAT_SIZE			32
-#define SSC_RHR_RDAT_OFFSET			 0
-
-/* SSC Transmit Hold Register */
-#define SSC_THR				0x00000024
-#define SSC_THR_TDAT_SIZE			32
-#define SSC_THR_TDAT_OFFSET			 0
-
-/* SSC Receive Sync. Holding Register */
-#define SSC_RSHR			0x00000030
-#define SSC_RSHR_RSDAT_SIZE			16
-#define SSC_RSHR_RSDAT_OFFSET			 0
-
-/* SSC Transmit Sync. Holding Register */
-#define SSC_TSHR			0x00000034
-#define SSC_TSHR_TSDAT_SIZE			16
-#define SSC_TSHR_RSDAT_OFFSET			 0
-
-/* SSC Receive Compare 0 Register */
-#define SSC_RC0R			0x00000038
-#define SSC_RC0R_CP0_SIZE			16
-#define SSC_RC0R_CP0_OFFSET			 0
-
-/* SSC Receive Compare 1 Register */
-#define SSC_RC1R			0x0000003c
-#define SSC_RC1R_CP1_SIZE			16
-#define SSC_RC1R_CP1_OFFSET			 0
-
-/* SSC Status Register */
-#define SSC_SR				0x00000040
-#define SSC_SR_CP0_SIZE				 1
-#define SSC_SR_CP0_OFFSET			 8
-#define SSC_SR_CP1_SIZE				 1
-#define SSC_SR_CP1_OFFSET			 9
-#define SSC_SR_ENDRX_SIZE			 1
-#define SSC_SR_ENDRX_OFFSET			 6
-#define SSC_SR_ENDTX_SIZE			 1
-#define SSC_SR_ENDTX_OFFSET			 2
-#define SSC_SR_OVRUN_SIZE			 1
-#define SSC_SR_OVRUN_OFFSET			 5
-#define SSC_SR_RXBUFF_SIZE			 1
-#define SSC_SR_RXBUFF_OFFSET			 7
-#define SSC_SR_RXEN_SIZE			 1
-#define SSC_SR_RXEN_OFFSET			17
-#define SSC_SR_RXRDY_SIZE			 1
-#define SSC_SR_RXRDY_OFFSET			 4
-#define SSC_SR_RXSYN_SIZE			 1
-#define SSC_SR_RXSYN_OFFSET			11
-#define SSC_SR_TXBUFE_SIZE			 1
-#define SSC_SR_TXBUFE_OFFSET			 3
-#define SSC_SR_TXEMPTY_SIZE			 1
-#define SSC_SR_TXEMPTY_OFFSET			 1
-#define SSC_SR_TXEN_SIZE			 1
-#define SSC_SR_TXEN_OFFSET			16
-#define SSC_SR_TXRDY_SIZE			 1
-#define SSC_SR_TXRDY_OFFSET			 0
-#define SSC_SR_TXSYN_SIZE			 1
-#define SSC_SR_TXSYN_OFFSET			10
-
-/* SSC Interrupt Enable Register */
-#define SSC_IER				0x00000044
-#define SSC_IER_CP0_SIZE			 1
-#define SSC_IER_CP0_OFFSET			 8
-#define SSC_IER_CP1_SIZE			 1
-#define SSC_IER_CP1_OFFSET			 9
-#define SSC_IER_ENDRX_SIZE			 1
-#define SSC_IER_ENDRX_OFFSET			 6
-#define SSC_IER_ENDTX_SIZE			 1
-#define SSC_IER_ENDTX_OFFSET			 2
-#define SSC_IER_OVRUN_SIZE			 1
-#define SSC_IER_OVRUN_OFFSET			 5
-#define SSC_IER_RXBUFF_SIZE			 1
-#define SSC_IER_RXBUFF_OFFSET			 7
-#define SSC_IER_RXRDY_SIZE			 1
-#define SSC_IER_RXRDY_OFFSET			 4
-#define SSC_IER_RXSYN_SIZE			 1
-#define SSC_IER_RXSYN_OFFSET			11
-#define SSC_IER_TXBUFE_SIZE			 1
-#define SSC_IER_TXBUFE_OFFSET			 3
-#define SSC_IER_TXEMPTY_SIZE			 1
-#define SSC_IER_TXEMPTY_OFFSET			 1
-#define SSC_IER_TXRDY_SIZE			 1
-#define SSC_IER_TXRDY_OFFSET			 0
-#define SSC_IER_TXSYN_SIZE			 1
-#define SSC_IER_TXSYN_OFFSET			10
-
-/* SSC Interrupt Disable Register */
-#define SSC_IDR				0x00000048
-#define SSC_IDR_CP0_SIZE			 1
-#define SSC_IDR_CP0_OFFSET			 8
-#define SSC_IDR_CP1_SIZE			 1
-#define SSC_IDR_CP1_OFFSET			 9
-#define SSC_IDR_ENDRX_SIZE			 1
-#define SSC_IDR_ENDRX_OFFSET			 6
-#define SSC_IDR_ENDTX_SIZE			 1
-#define SSC_IDR_ENDTX_OFFSET			 2
-#define SSC_IDR_OVRUN_SIZE			 1
-#define SSC_IDR_OVRUN_OFFSET			 5
-#define SSC_IDR_RXBUFF_SIZE			 1
-#define SSC_IDR_RXBUFF_OFFSET			 7
-#define SSC_IDR_RXRDY_SIZE			 1
-#define SSC_IDR_RXRDY_OFFSET			 4
-#define SSC_IDR_RXSYN_SIZE			 1
-#define SSC_IDR_RXSYN_OFFSET			11
-#define SSC_IDR_TXBUFE_SIZE			 1
-#define SSC_IDR_TXBUFE_OFFSET			 3
-#define SSC_IDR_TXEMPTY_SIZE			 1
-#define SSC_IDR_TXEMPTY_OFFSET			 1
-#define SSC_IDR_TXRDY_SIZE			 1
-#define SSC_IDR_TXRDY_OFFSET			 0
-#define SSC_IDR_TXSYN_SIZE			 1
-#define SSC_IDR_TXSYN_OFFSET			10
-
-/* SSC Interrupt Mask Register */
-#define SSC_IMR				0x0000004c
-#define SSC_IMR_CP0_SIZE			 1
-#define SSC_IMR_CP0_OFFSET			 8
-#define SSC_IMR_CP1_SIZE			 1
-#define SSC_IMR_CP1_OFFSET			 9
-#define SSC_IMR_ENDRX_SIZE			 1
-#define SSC_IMR_ENDRX_OFFSET			 6
-#define SSC_IMR_ENDTX_SIZE			 1
-#define SSC_IMR_ENDTX_OFFSET			 2
-#define SSC_IMR_OVRUN_SIZE			 1
-#define SSC_IMR_OVRUN_OFFSET			 5
-#define SSC_IMR_RXBUFF_SIZE			 1
-#define SSC_IMR_RXBUFF_OFFSET			 7
-#define SSC_IMR_RXRDY_SIZE			 1
-#define SSC_IMR_RXRDY_OFFSET			 4
-#define SSC_IMR_RXSYN_SIZE			 1
-#define SSC_IMR_RXSYN_OFFSET			11
-#define SSC_IMR_TXBUFE_SIZE			 1
-#define SSC_IMR_TXBUFE_OFFSET			 3
-#define SSC_IMR_TXEMPTY_SIZE			 1
-#define SSC_IMR_TXEMPTY_OFFSET			 1
-#define SSC_IMR_TXRDY_SIZE			 1
-#define SSC_IMR_TXRDY_OFFSET			 0
-#define SSC_IMR_TXSYN_SIZE			 1
-#define SSC_IMR_TXSYN_OFFSET			10
-
-/* SSC PDC Receive Pointer Register */
-#define SSC_PDC_RPR			0x00000100
-
-/* SSC PDC Receive Counter Register */
-#define SSC_PDC_RCR			0x00000104
-
-/* SSC PDC Transmit Pointer Register */
-#define SSC_PDC_TPR			0x00000108
-
-/* SSC PDC Receive Next Pointer Register */
-#define SSC_PDC_RNPR			0x00000110
-
-/* SSC PDC Receive Next Counter Register */
-#define SSC_PDC_RNCR			0x00000114
-
-/* SSC PDC Transmit Counter Register */
-#define SSC_PDC_TCR			0x0000010c
-
-/* SSC PDC Transmit Next Pointer Register */
-#define SSC_PDC_TNPR			0x00000118
-
-/* SSC PDC Transmit Next Counter Register */
-#define SSC_PDC_TNCR			0x0000011c
-
-/* SSC PDC Transfer Control Register */
-#define SSC_PDC_PTCR			0x00000120
-#define SSC_PDC_PTCR_RXTDIS_SIZE		 1
-#define SSC_PDC_PTCR_RXTDIS_OFFSET		 1
-#define SSC_PDC_PTCR_RXTEN_SIZE			 1
-#define SSC_PDC_PTCR_RXTEN_OFFSET		 0
-#define SSC_PDC_PTCR_TXTDIS_SIZE		 1
-#define SSC_PDC_PTCR_TXTDIS_OFFSET		 9
-#define SSC_PDC_PTCR_TXTEN_SIZE			 1
-#define SSC_PDC_PTCR_TXTEN_OFFSET		 8
-
-/* SSC PDC Transfer Status Register */
-#define SSC_PDC_PTSR			0x00000124
-#define SSC_PDC_PTSR_RXTEN_SIZE			 1
-#define SSC_PDC_PTSR_RXTEN_OFFSET		 0
-#define SSC_PDC_PTSR_TXTEN_SIZE			 1
-#define SSC_PDC_PTSR_TXTEN_OFFSET		 8
-
-/* Bit manipulation macros */
-#define SSC_BIT(name)					\
-	(1 << SSC_##name##_OFFSET)
-#define SSC_BF(name, value)				\
-	(((value) & ((1 << SSC_##name##_SIZE) - 1))	\
-	 << SSC_##name##_OFFSET)
-#define SSC_BFEXT(name, value)				\
-	(((value) >> SSC_##name##_OFFSET)		\
-	 & ((1 << SSC_##name##_SIZE) - 1))
-#define SSC_BFINS(name, value, old)			\
-	(((old) & ~(((1 << SSC_##name##_SIZE) - 1)	\
-	<< SSC_##name##_OFFSET)) | SSC_BF(name, value))
-
-/* Register access macros */
-#define ssc_readl(base, reg)		__raw_readl(base + SSC_##reg)
-#define ssc_writel(base, reg, value)	__raw_writel((value), base + SSC_##reg)
-
-#endif /* __INCLUDE_ATMEL_SSC_H */
diff --git a/ANDROID_3.4.5/include/linux/atmel_pdc.h b/ANDROID_3.4.5/include/linux/atmel_pdc.h
deleted file mode 100644
index 63499ce8..00000000
--- a/ANDROID_3.4.5/include/linux/atmel_pdc.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- * include/linux/atmel_pdc.h
- *
- * Copyright (C) 2005 Ivan Kokshaysky
- * Copyright (C) SAN People
- *
- * Peripheral Data Controller (PDC) registers.
- * Based on AT91RM9200 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef ATMEL_PDC_H
-#define ATMEL_PDC_H
-
-#define ATMEL_PDC_RPR		0x100	/* Receive Pointer Register */
-#define ATMEL_PDC_RCR		0x104	/* Receive Counter Register */
-#define ATMEL_PDC_TPR		0x108	/* Transmit Pointer Register */
-#define ATMEL_PDC_TCR		0x10c	/* Transmit Counter Register */
-#define ATMEL_PDC_RNPR		0x110	/* Receive Next Pointer Register */
-#define ATMEL_PDC_RNCR		0x114	/* Receive Next Counter Register */
-#define ATMEL_PDC_TNPR		0x118	/* Transmit Next Pointer Register */
-#define ATMEL_PDC_TNCR		0x11c	/* Transmit Next Counter Register */
-
-#define ATMEL_PDC_PTCR		0x120	/* Transfer Control Register */
-#define		ATMEL_PDC_RXTEN		(1 << 0)	/* Receiver Transfer Enable */
-#define		ATMEL_PDC_RXTDIS	(1 << 1)	/* Receiver Transfer Disable */
-#define		ATMEL_PDC_TXTEN		(1 << 8)	/* Transmitter Transfer Enable */
-#define		ATMEL_PDC_TXTDIS	(1 << 9)	/* Transmitter Transfer Disable */
-
-#define ATMEL_PDC_PTSR		0x124	/* Transfer Status Register */
-
-#define ATMEL_PDC_SCND_BUF_OFF	0x10	/* Offset between first and second buffer registers */
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/atmel_pwm.h b/ANDROID_3.4.5/include/linux/atmel_pwm.h
deleted file mode 100644
index ea04abb3..00000000
--- a/ANDROID_3.4.5/include/linux/atmel_pwm.h
+++ /dev/null
@@ -1,70 +0,0 @@
-#ifndef __LINUX_ATMEL_PWM_H
-#define __LINUX_ATMEL_PWM_H
-
-/**
- * struct pwm_channel - driver handle to a PWM channel
- * @regs: base of this channel's registers
- * @index: number of this channel (0..31)
- * @mck: base clock rate, which can be prescaled and maybe subdivided
- *
- * Drivers initialize a pwm_channel structure using pwm_channel_alloc().
- * Then they configure its clock rate (derived from MCK), alignment,
- * polarity, and duty cycle by writing directly to the channel registers,
- * before enabling the channel by calling pwm_channel_enable().
- *
- * After emitting a PWM signal for the desired length of time, drivers
- * may then pwm_channel_disable() or pwm_channel_free().  Both of these
- * disable the channel, but when it's freed the IRQ is deconfigured and
- * the channel must later be re-allocated and reconfigured.
- *
- * Note that if the period or duty cycle need to be changed while the
- * PWM channel is operating, drivers must use the PWM_CUPD double buffer
- * mechanism, either polling until they change or getting implicitly
- * notified through a once-per-period interrupt handler.
- */
-struct pwm_channel {
-	void __iomem	*regs;
-	unsigned	index;
-	unsigned long	mck;
-};
-
-extern int pwm_channel_alloc(int index, struct pwm_channel *ch);
-extern int pwm_channel_free(struct pwm_channel *ch);
-
-extern int pwm_clk_alloc(unsigned prescale, unsigned div);
-extern void pwm_clk_free(unsigned clk);
-
-extern int __pwm_channel_onoff(struct pwm_channel *ch, int enabled);
-
-#define pwm_channel_enable(ch)	__pwm_channel_onoff((ch), 1)
-#define pwm_channel_disable(ch)	__pwm_channel_onoff((ch), 0)
-
-/* periodic interrupts, mostly for CUPD changes to period or cycle */
-extern int pwm_channel_handler(struct pwm_channel *ch,
-		void (*handler)(struct pwm_channel *ch));
-
-/* per-channel registers (banked at pwm_channel->regs) */
-#define PWM_CMR		0x00		/* mode register */
-#define		PWM_CPR_CPD	(1 << 10)	/* set: CUPD modifies period */
-#define		PWM_CPR_CPOL	(1 << 9)	/* set: idle high */
-#define		PWM_CPR_CALG	(1 << 8)	/* set: center align */
-#define		PWM_CPR_CPRE	(0xf << 0)	/* mask: rate is mck/(2^pre) */
-#define		PWM_CPR_CLKA	(0xb << 0)	/* rate CLKA */
-#define		PWM_CPR_CLKB	(0xc << 0)	/* rate CLKB */
-#define PWM_CDTY	0x04		/* duty cycle (max of CPRD) */
-#define PWM_CPRD	0x08		/* period (count up from zero) */
-#define PWM_CCNT	0x0c		/* counter (20 bits?) */
-#define PWM_CUPD	0x10		/* update CPRD (or CDTY) next period */
-
-static inline void
-pwm_channel_writel(struct pwm_channel *pwmc, unsigned offset, u32 val)
-{
-	__raw_writel(val, pwmc->regs + offset);
-}
-
-static inline u32 pwm_channel_readl(struct pwm_channel *pwmc, unsigned offset)
-{
-	return __raw_readl(pwmc->regs + offset);
-}
-
-#endif /* __LINUX_ATMEL_PWM_H */
diff --git a/ANDROID_3.4.5/include/linux/atmel_serial.h b/ANDROID_3.4.5/include/linux/atmel_serial.h
deleted file mode 100644
index fd683376..00000000
--- a/ANDROID_3.4.5/include/linux/atmel_serial.h
+++ /dev/null
@@ -1,127 +0,0 @@
-/*
- * include/linux/atmel_serial.h
- *
- * Copyright (C) 2005 Ivan Kokshaysky
- * Copyright (C) SAN People
- *
- * USART registers.
- * Based on AT91RM9200 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef ATMEL_SERIAL_H
-#define ATMEL_SERIAL_H
-
-#define ATMEL_US_CR		0x00			/* Control Register */
-#define		ATMEL_US_RSTRX		(1 <<  2)		/* Reset Receiver */
-#define		ATMEL_US_RSTTX		(1 <<  3)		/* Reset Transmitter */
-#define		ATMEL_US_RXEN		(1 <<  4)		/* Receiver Enable */
-#define		ATMEL_US_RXDIS		(1 <<  5)		/* Receiver Disable */
-#define		ATMEL_US_TXEN		(1 <<  6)		/* Transmitter Enable */
-#define		ATMEL_US_TXDIS		(1 <<  7)		/* Transmitter Disable */
-#define		ATMEL_US_RSTSTA		(1 <<  8)		/* Reset Status Bits */
-#define		ATMEL_US_STTBRK		(1 <<  9)		/* Start Break */
-#define		ATMEL_US_STPBRK		(1 << 10)		/* Stop Break */
-#define		ATMEL_US_STTTO		(1 << 11)		/* Start Time-out */
-#define		ATMEL_US_SENDA		(1 << 12)		/* Send Address */
-#define		ATMEL_US_RSTIT		(1 << 13)		/* Reset Iterations */
-#define		ATMEL_US_RSTNACK	(1 << 14)		/* Reset Non Acknowledge */
-#define		ATMEL_US_RETTO		(1 << 15)		/* Rearm Time-out */
-#define		ATMEL_US_DTREN		(1 << 16)		/* Data Terminal Ready Enable [AT91RM9200 only] */
-#define		ATMEL_US_DTRDIS		(1 << 17)		/* Data Terminal Ready Disable [AT91RM9200 only] */
-#define		ATMEL_US_RTSEN		(1 << 18)		/* Request To Send Enable */
-#define		ATMEL_US_RTSDIS		(1 << 19)		/* Request To Send Disable */
-
-#define ATMEL_US_MR		0x04			/* Mode Register */
-#define		ATMEL_US_USMODE		(0xf <<  0)		/* Mode of the USART */
-#define			ATMEL_US_USMODE_NORMAL		0
-#define			ATMEL_US_USMODE_RS485		1
-#define			ATMEL_US_USMODE_HWHS		2
-#define			ATMEL_US_USMODE_MODEM		3
-#define			ATMEL_US_USMODE_ISO7816_T0	4
-#define			ATMEL_US_USMODE_ISO7816_T1	6
-#define			ATMEL_US_USMODE_IRDA		8
-#define		ATMEL_US_USCLKS		(3   <<  4)		/* Clock Selection */
-#define			ATMEL_US_USCLKS_MCK		(0 <<  4)
-#define			ATMEL_US_USCLKS_MCK_DIV8	(1 <<  4)
-#define			ATMEL_US_USCLKS_SCK		(3 <<  4)
-#define		ATMEL_US_CHRL		(3   <<  6)		/* Character Length */
-#define			ATMEL_US_CHRL_5			(0 <<  6)
-#define			ATMEL_US_CHRL_6			(1 <<  6)
-#define			ATMEL_US_CHRL_7			(2 <<  6)
-#define			ATMEL_US_CHRL_8			(3 <<  6)
-#define		ATMEL_US_SYNC		(1 <<  8)		/* Synchronous Mode Select */
-#define		ATMEL_US_PAR		(7 <<  9)		/* Parity Type */
-#define			ATMEL_US_PAR_EVEN		(0 <<  9)
-#define			ATMEL_US_PAR_ODD		(1 <<  9)
-#define			ATMEL_US_PAR_SPACE		(2 <<  9)
-#define			ATMEL_US_PAR_MARK		(3 <<  9)
-#define			ATMEL_US_PAR_NONE		(4 <<  9)
-#define			ATMEL_US_PAR_MULTI_DROP		(6 <<  9)
-#define		ATMEL_US_NBSTOP		(3 << 12)		/* Number of Stop Bits */
-#define			ATMEL_US_NBSTOP_1		(0 << 12)
-#define			ATMEL_US_NBSTOP_1_5		(1 << 12)
-#define			ATMEL_US_NBSTOP_2		(2 << 12)
-#define		ATMEL_US_CHMODE		(3 << 14)		/* Channel Mode */
-#define			ATMEL_US_CHMODE_NORMAL		(0 << 14)
-#define			ATMEL_US_CHMODE_ECHO		(1 << 14)
-#define			ATMEL_US_CHMODE_LOC_LOOP	(2 << 14)
-#define			ATMEL_US_CHMODE_REM_LOOP	(3 << 14)
-#define		ATMEL_US_MSBF		(1 << 16)		/* Bit Order */
-#define		ATMEL_US_MODE9		(1 << 17)		/* 9-bit Character Length */
-#define		ATMEL_US_CLKO		(1 << 18)		/* Clock Output Select */
-#define		ATMEL_US_OVER		(1 << 19)		/* Oversampling Mode */
-#define		ATMEL_US_INACK		(1 << 20)		/* Inhibit Non Acknowledge */
-#define		ATMEL_US_DSNACK		(1 << 21)		/* Disable Successive NACK */
-#define		ATMEL_US_MAX_ITER	(7 << 24)		/* Max Iterations */
-#define		ATMEL_US_FILTER		(1 << 28)		/* Infrared Receive Line Filter */
-
-#define ATMEL_US_IER		0x08			/* Interrupt Enable Register */
-#define		ATMEL_US_RXRDY		(1 <<  0)		/* Receiver Ready */
-#define		ATMEL_US_TXRDY		(1 <<  1)		/* Transmitter Ready */
-#define		ATMEL_US_RXBRK		(1 <<  2)		/* Break Received / End of Break */
-#define		ATMEL_US_ENDRX		(1 <<  3)		/* End of Receiver Transfer */
-#define		ATMEL_US_ENDTX		(1 <<  4)		/* End of Transmitter Transfer */
-#define		ATMEL_US_OVRE		(1 <<  5)		/* Overrun Error */
-#define		ATMEL_US_FRAME		(1 <<  6)		/* Framing Error */
-#define		ATMEL_US_PARE		(1 <<  7)		/* Parity Error */
-#define		ATMEL_US_TIMEOUT	(1 <<  8)		/* Receiver Time-out */
-#define		ATMEL_US_TXEMPTY	(1 <<  9)		/* Transmitter Empty */
-#define		ATMEL_US_ITERATION	(1 << 10)		/* Max number of Repetitions Reached */
-#define		ATMEL_US_TXBUFE		(1 << 11)		/* Transmission Buffer Empty */
-#define		ATMEL_US_RXBUFF		(1 << 12)		/* Reception Buffer Full */
-#define		ATMEL_US_NACK		(1 << 13)		/* Non Acknowledge */
-#define		ATMEL_US_RIIC		(1 << 16)		/* Ring Indicator Input Change [AT91RM9200 only] */
-#define		ATMEL_US_DSRIC		(1 << 17)		/* Data Set Ready Input Change [AT91RM9200 only] */
-#define		ATMEL_US_DCDIC		(1 << 18)		/* Data Carrier Detect Input Change [AT91RM9200 only] */
-#define		ATMEL_US_CTSIC		(1 << 19)		/* Clear to Send Input Change */
-#define		ATMEL_US_RI		(1 << 20)		/* RI */
-#define		ATMEL_US_DSR		(1 << 21)		/* DSR */
-#define		ATMEL_US_DCD		(1 << 22)		/* DCD */
-#define		ATMEL_US_CTS		(1 << 23)		/* CTS */
-
-#define ATMEL_US_IDR		0x0c			/* Interrupt Disable Register */
-#define ATMEL_US_IMR		0x10			/* Interrupt Mask Register */
-#define ATMEL_US_CSR		0x14			/* Channel Status Register */
-#define ATMEL_US_RHR		0x18			/* Receiver Holding Register */
-#define ATMEL_US_THR		0x1c			/* Transmitter Holding Register */
-#define		ATMEL_US_SYNH		(1 << 15)		/* Transmit/Receive Sync [AT91SAM9261 only] */
-
-#define ATMEL_US_BRGR		0x20			/* Baud Rate Generator Register */
-#define		ATMEL_US_CD		(0xffff << 0)		/* Clock Divider */
-
-#define ATMEL_US_RTOR		0x24			/* Receiver Time-out Register */
-#define		ATMEL_US_TO		(0xffff << 0)		/* Time-out Value */
-
-#define ATMEL_US_TTGR		0x28			/* Transmitter Timeguard Register */
-#define		ATMEL_US_TG		(0xff << 0)		/* Timeguard Value */
-
-#define ATMEL_US_FIDI		0x40			/* FI DI Ratio Register */
-#define ATMEL_US_NER		0x44			/* Number of Errors Register */
-#define ATMEL_US_IF		0x4c			/* IrDA Filter Register */
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/atmel_tc.h b/ANDROID_3.4.5/include/linux/atmel_tc.h
deleted file mode 100644
index 1d14b1dc..00000000
--- a/ANDROID_3.4.5/include/linux/atmel_tc.h
+++ /dev/null
@@ -1,262 +0,0 @@
-/*
- * Timer/Counter Unit (TC) registers.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef ATMEL_TC_H
-#define ATMEL_TC_H
-
-#include <linux/compiler.h>
-#include <linux/list.h>
-
-/*
- * Many 32-bit Atmel SOCs include one or more TC blocks, each of which holds
- * three general-purpose 16-bit timers.  These timers share one register bank.
- * Depending on the SOC, each timer may have its own clock and IRQ, or those
- * may be shared by the whole TC block.
- *
- * These TC blocks may have up to nine external pins:  TCLK0..2 signals for
- * clocks or clock gates, and per-timer TIOA and TIOB signals used for PWM
- * or triggering.  Those pins need to be set up for use with the TC block,
- * else they will be used as GPIOs or for a different controller.
- *
- * Although we expect each TC block to have a platform_device node, those
- * nodes are not what drivers bind to.  Instead, they ask for a specific
- * TC block, by number ... which is a common approach on systems with many
- * timers.  Then they use clk_get() and platform_get_irq() to get clock and
- * IRQ resources.
- */
-
-struct clk;
-
-/**
- * struct atmel_tcb_config - SoC data for a Timer/Counter Block
- * @counter_width: size in bits of a timer counter register
- */
-struct atmel_tcb_config {
-	size_t	counter_width;
-};
-
-/**
- * struct atmel_tc - information about a Timer/Counter Block
- * @pdev: physical device
- * @iomem: resource associated with the I/O register
- * @regs: mapping through which the I/O registers can be accessed
- * @tcb_config: configuration data from SoC
- * @irq: irq for each of the three channels
- * @clk: internal clock source for each of the three channels
- * @node: list node, for tclib internal use
- *
- * On some platforms, each TC channel has its own clocks and IRQs,
- * while on others, all TC channels share the same clock and IRQ.
- * Drivers should clk_enable() all the clocks they need even though
- * all the entries in @clk may point to the same physical clock.
- * Likewise, drivers should request irqs independently for each
- * channel, but they must use IRQF_SHARED in case some of the entries
- * in @irq are actually the same IRQ.
- */
-struct atmel_tc {
-	struct platform_device	*pdev;
-	struct resource		*iomem;
-	void __iomem		*regs;
-	struct atmel_tcb_config	*tcb_config;
-	int			irq[3];
-	struct clk		*clk[3];
-	struct list_head	node;
-};
-
-extern struct atmel_tc *atmel_tc_alloc(unsigned block, const char *name);
-extern void atmel_tc_free(struct atmel_tc *tc);
-
-/* platform-specific ATMEL_TC_TIMER_CLOCKx divisors (0 means 32KiHz) */
-extern const u8 atmel_tc_divisors[5];
-
-
-/*
- * Two registers have block-wide controls.  These are: configuring the three
- * "external" clocks (or event sources) used by the timer channels; and
- * synchronizing the timers by resetting them all at once.
- *
- * "External" can mean "external to chip" using the TCLK0, TCLK1, or TCLK2
- * signals.  Or, it can mean "external to timer", using the TIOA output from
- * one of the other two timers that's being run in waveform mode.
- */
-
-#define ATMEL_TC_BCR	0xc0		/* TC Block Control Register */
-#define     ATMEL_TC_SYNC	(1 << 0)	/* synchronize timers */
-
-#define ATMEL_TC_BMR	0xc4		/* TC Block Mode Register */
-#define     ATMEL_TC_TC0XC0S	(3 << 0)	/* external clock 0 source */
-#define        ATMEL_TC_TC0XC0S_TCLK0	(0 << 0)
-#define        ATMEL_TC_TC0XC0S_NONE	(1 << 0)
-#define        ATMEL_TC_TC0XC0S_TIOA1	(2 << 0)
-#define        ATMEL_TC_TC0XC0S_TIOA2	(3 << 0)
-#define     ATMEL_TC_TC1XC1S	(3 << 2)	/* external clock 1 source */
-#define        ATMEL_TC_TC1XC1S_TCLK1	(0 << 2)
-#define        ATMEL_TC_TC1XC1S_NONE	(1 << 2)
-#define        ATMEL_TC_TC1XC1S_TIOA0	(2 << 2)
-#define        ATMEL_TC_TC1XC1S_TIOA2	(3 << 2)
-#define     ATMEL_TC_TC2XC2S	(3 << 4)	/* external clock 2 source */
-#define        ATMEL_TC_TC2XC2S_TCLK2	(0 << 4)
-#define        ATMEL_TC_TC2XC2S_NONE	(1 << 4)
-#define        ATMEL_TC_TC2XC2S_TIOA0	(2 << 4)
-#define        ATMEL_TC_TC2XC2S_TIOA1	(3 << 4)
-
-
-/*
- * Each TC block has three "channels", each with one counter and controls.
- *
- * Note that the semantics of ATMEL_TC_TIMER_CLOCKx (input clock selection
- * when it's not "external") is silicon-specific.  AT91 platforms use one
- * set of definitions; AVR32 platforms use a different set.  Don't hard-wire
- * such knowledge into your code, use the global "atmel_tc_divisors" ...
- * where index N is the divisor for clock N+1, else zero to indicate it uses
- * the 32 KiHz clock.
- *
- * The timers can be chained in various ways, and operated in "waveform"
- * generation mode (including PWM) or "capture" mode (to time events).  In
- * both modes, behavior can be configured in many ways.
- *
- * Each timer has two I/O pins, TIOA and TIOB.  Waveform mode uses TIOA as a
- * PWM output, and TIOB as either another PWM or as a trigger.  Capture mode
- * uses them only as inputs.
- */
-#define ATMEL_TC_CHAN(idx)	((idx)*0x40)
-#define ATMEL_TC_REG(idx, reg)	(ATMEL_TC_CHAN(idx) + ATMEL_TC_ ## reg)
-
-#define ATMEL_TC_CCR	0x00		/* Channel Control Register */
-#define     ATMEL_TC_CLKEN	(1 << 0)	/* clock enable */
-#define     ATMEL_TC_CLKDIS	(1 << 1)	/* clock disable */
-#define     ATMEL_TC_SWTRG	(1 << 2)	/* software trigger */
-
-#define ATMEL_TC_CMR	0x04		/* Channel Mode Register */
-
-/* Both modes share some CMR bits */
-#define     ATMEL_TC_TCCLKS	(7 << 0)	/* clock source */
-#define        ATMEL_TC_TIMER_CLOCK1	(0 << 0)
-#define        ATMEL_TC_TIMER_CLOCK2	(1 << 0)
-#define        ATMEL_TC_TIMER_CLOCK3	(2 << 0)
-#define        ATMEL_TC_TIMER_CLOCK4	(3 << 0)
-#define        ATMEL_TC_TIMER_CLOCK5	(4 << 0)
-#define        ATMEL_TC_XC0		(5 << 0)
-#define        ATMEL_TC_XC1		(6 << 0)
-#define        ATMEL_TC_XC2		(7 << 0)
-#define     ATMEL_TC_CLKI	(1 << 3)	/* clock invert */
-#define     ATMEL_TC_BURST	(3 << 4)	/* clock gating */
-#define        ATMEL_TC_GATE_NONE	(0 << 4)
-#define        ATMEL_TC_GATE_XC0	(1 << 4)
-#define        ATMEL_TC_GATE_XC1	(2 << 4)
-#define        ATMEL_TC_GATE_XC2	(3 << 4)
-#define     ATMEL_TC_WAVE	(1 << 15)	/* true = Waveform mode */
-
-/* CAPTURE mode CMR bits */
-#define     ATMEL_TC_LDBSTOP	(1 << 6)	/* counter stops on RB load */
-#define     ATMEL_TC_LDBDIS	(1 << 7)	/* counter disable on RB load */
-#define     ATMEL_TC_ETRGEDG	(3 << 8)	/* external trigger edge */
-#define        ATMEL_TC_ETRGEDG_NONE	(0 << 8)
-#define        ATMEL_TC_ETRGEDG_RISING	(1 << 8)
-#define        ATMEL_TC_ETRGEDG_FALLING	(2 << 8)
-#define        ATMEL_TC_ETRGEDG_BOTH	(3 << 8)
-#define     ATMEL_TC_ABETRG	(1 << 10)	/* external trigger is TIOA? */
-#define     ATMEL_TC_CPCTRG	(1 << 14)	/* RC compare trigger enable */
-#define     ATMEL_TC_LDRA	(3 << 16)	/* RA loading edge (of TIOA) */
-#define        ATMEL_TC_LDRA_NONE	(0 << 16)
-#define        ATMEL_TC_LDRA_RISING	(1 << 16)
-#define        ATMEL_TC_LDRA_FALLING	(2 << 16)
-#define        ATMEL_TC_LDRA_BOTH	(3 << 16)
-#define     ATMEL_TC_LDRB	(3 << 18)	/* RB loading edge (of TIOA) */
-#define        ATMEL_TC_LDRB_NONE	(0 << 18)
-#define        ATMEL_TC_LDRB_RISING	(1 << 18)
-#define        ATMEL_TC_LDRB_FALLING	(2 << 18)
-#define        ATMEL_TC_LDRB_BOTH	(3 << 18)
-
-/* WAVEFORM mode CMR bits */
-#define     ATMEL_TC_CPCSTOP	(1 <<  6)	/* RC compare stops counter */
-#define     ATMEL_TC_CPCDIS	(1 <<  7)	/* RC compare disables counter */
-#define     ATMEL_TC_EEVTEDG	(3 <<  8)	/* external event edge */
-#define        ATMEL_TC_EEVTEDG_NONE	(0 << 8)
-#define        ATMEL_TC_EEVTEDG_RISING	(1 << 8)
-#define        ATMEL_TC_EEVTEDG_FALLING	(2 << 8)
-#define        ATMEL_TC_EEVTEDG_BOTH	(3 << 8)
-#define     ATMEL_TC_EEVT	(3 << 10)	/* external event source */
-#define        ATMEL_TC_EEVT_TIOB	(0 << 10)
-#define        ATMEL_TC_EEVT_XC0	(1 << 10)
-#define        ATMEL_TC_EEVT_XC1	(2 << 10)
-#define        ATMEL_TC_EEVT_XC2	(3 << 10)
-#define     ATMEL_TC_ENETRG	(1 << 12)	/* external event is trigger */
-#define     ATMEL_TC_WAVESEL	(3 << 13)	/* waveform type */
-#define        ATMEL_TC_WAVESEL_UP	(0 << 13)
-#define        ATMEL_TC_WAVESEL_UPDOWN	(1 << 13)
-#define        ATMEL_TC_WAVESEL_UP_AUTO	(2 << 13)
-#define        ATMEL_TC_WAVESEL_UPDOWN_AUTO (3 << 13)
-#define     ATMEL_TC_ACPA	(3 << 16)	/* RA compare changes TIOA */
-#define        ATMEL_TC_ACPA_NONE	(0 << 16)
-#define        ATMEL_TC_ACPA_SET	(1 << 16)
-#define        ATMEL_TC_ACPA_CLEAR	(2 << 16)
-#define        ATMEL_TC_ACPA_TOGGLE	(3 << 16)
-#define     ATMEL_TC_ACPC	(3 << 18)	/* RC compare changes TIOA */
-#define        ATMEL_TC_ACPC_NONE	(0 << 18)
-#define        ATMEL_TC_ACPC_SET	(1 << 18)
-#define        ATMEL_TC_ACPC_CLEAR	(2 << 18)
-#define        ATMEL_TC_ACPC_TOGGLE	(3 << 18)
-#define     ATMEL_TC_AEEVT	(3 << 20)	/* external event changes TIOA */
-#define        ATMEL_TC_AEEVT_NONE	(0 << 20)
-#define        ATMEL_TC_AEEVT_SET	(1 << 20)
-#define        ATMEL_TC_AEEVT_CLEAR	(2 << 20)
-#define        ATMEL_TC_AEEVT_TOGGLE	(3 << 20)
-#define     ATMEL_TC_ASWTRG	(3 << 22)	/* software trigger changes TIOA */
-#define        ATMEL_TC_ASWTRG_NONE	(0 << 22)
-#define        ATMEL_TC_ASWTRG_SET	(1 << 22)
-#define        ATMEL_TC_ASWTRG_CLEAR	(2 << 22)
-#define        ATMEL_TC_ASWTRG_TOGGLE	(3 << 22)
-#define     ATMEL_TC_BCPB	(3 << 24)	/* RB compare changes TIOB */
-#define        ATMEL_TC_BCPB_NONE	(0 << 24)
-#define        ATMEL_TC_BCPB_SET	(1 << 24)
-#define        ATMEL_TC_BCPB_CLEAR	(2 << 24)
-#define        ATMEL_TC_BCPB_TOGGLE	(3 << 24)
-#define     ATMEL_TC_BCPC	(3 << 26)	/* RC compare changes TIOB */
-#define        ATMEL_TC_BCPC_NONE	(0 << 26)
-#define        ATMEL_TC_BCPC_SET	(1 << 26)
-#define        ATMEL_TC_BCPC_CLEAR	(2 << 26)
-#define        ATMEL_TC_BCPC_TOGGLE	(3 << 26)
-#define     ATMEL_TC_BEEVT	(3 << 28)	/* external event changes TIOB */
-#define        ATMEL_TC_BEEVT_NONE	(0 << 28)
-#define        ATMEL_TC_BEEVT_SET	(1 << 28)
-#define        ATMEL_TC_BEEVT_CLEAR	(2 << 28)
-#define        ATMEL_TC_BEEVT_TOGGLE	(3 << 28)
-#define     ATMEL_TC_BSWTRG	(3 << 30)	/* software trigger changes TIOB */
-#define        ATMEL_TC_BSWTRG_NONE	(0 << 30)
-#define        ATMEL_TC_BSWTRG_SET	(1 << 30)
-#define        ATMEL_TC_BSWTRG_CLEAR	(2 << 30)
-#define        ATMEL_TC_BSWTRG_TOGGLE	(3 << 30)
-
-#define ATMEL_TC_CV	0x10		/* counter Value */
-#define ATMEL_TC_RA	0x14		/* register A */
-#define ATMEL_TC_RB	0x18		/* register B */
-#define ATMEL_TC_RC	0x1c		/* register C */
-
-#define ATMEL_TC_SR	0x20		/* status (read-only) */
-/* Status-only flags */
-#define     ATMEL_TC_CLKSTA	(1 << 16)	/* clock enabled */
-#define     ATMEL_TC_MTIOA	(1 << 17)	/* TIOA mirror */
-#define     ATMEL_TC_MTIOB	(1 << 18)	/* TIOB mirror */
-
-#define ATMEL_TC_IER	0x24		/* interrupt enable (write-only) */
-#define ATMEL_TC_IDR	0x28		/* interrupt disable (write-only) */
-#define ATMEL_TC_IMR	0x2c		/* interrupt mask (read-only) */
-
-/* Status and IRQ flags */
-#define     ATMEL_TC_COVFS	(1 <<  0)	/* counter overflow */
-#define     ATMEL_TC_LOVRS	(1 <<  1)	/* load overrun */
-#define     ATMEL_TC_CPAS	(1 <<  2)	/* RA compare */
-#define     ATMEL_TC_CPBS	(1 <<  3)	/* RB compare */
-#define     ATMEL_TC_CPCS	(1 <<  4)	/* RC compare */
-#define     ATMEL_TC_LDRAS	(1 <<  5)	/* RA loading */
-#define     ATMEL_TC_LDRBS	(1 <<  6)	/* RB loading */
-#define     ATMEL_TC_ETRGS	(1 <<  7)	/* external trigger */
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/atmioc.h b/ANDROID_3.4.5/include/linux/atmioc.h
deleted file mode 100644
index 37f67aa8..00000000
--- a/ANDROID_3.4.5/include/linux/atmioc.h
+++ /dev/null
@@ -1,41 +0,0 @@
-/* atmioc.h - ranges for ATM-related ioctl numbers */
- 
-/* Written 1995-1999 by Werner Almesberger, EPFL LRC/ICA */
-
-
-/*
- * See http://icawww1.epfl.ch/linux-atm/magic.html for the complete list of
- * "magic" ioctl numbers.
- */
-
-
-#ifndef _LINUX_ATMIOC_H
-#define _LINUX_ATMIOC_H
-
-#include <asm/ioctl.h>
-		/* everybody including atmioc.h will also need _IO{,R,W,WR} */
-
-#define ATMIOC_PHYCOM	  0x00 /* PHY device common ioctls, globally unique */
-#define ATMIOC_PHYCOM_END 0x0f
-#define ATMIOC_PHYTYP	  0x10 /* PHY dev type ioctls, unique per PHY type */
-#define ATMIOC_PHYTYP_END 0x2f
-#define ATMIOC_PHYPRV	  0x30 /* PHY dev private ioctls, unique per driver */
-#define ATMIOC_PHYPRV_END 0x4f
-#define ATMIOC_SARCOM	  0x50 /* SAR device common ioctls, globally unique */
-#define ATMIOC_SARCOM_END 0x50
-#define ATMIOC_SARPRV	  0x60 /* SAR dev private ioctls, unique per driver */
-#define ATMIOC_SARPRV_END 0x7f
-#define ATMIOC_ITF	  0x80 /* Interface ioctls, globally unique */
-#define ATMIOC_ITF_END	  0x8f
-#define ATMIOC_BACKEND	  0x90 /* ATM generic backend ioctls, u. per backend */
-#define ATMIOC_BACKEND_END 0xaf
-/* 0xb0-0xbf: Reserved for future use */
-#define ATMIOC_AREQUIPA	  0xc0 /* Application requested IP over ATM, glob. u. */
-#define ATMIOC_LANE	  0xd0 /* LAN Emulation, globally unique */
-#define ATMIOC_MPOA       0xd8 /* MPOA, globally unique */
-#define	ATMIOC_CLIP	  0xe0 /* Classical IP over ATM control, globally u. */
-#define	ATMIOC_CLIP_END	  0xef
-#define	ATMIOC_SPECIAL	  0xf0 /* Special-purpose controls, globally unique */
-#define	ATMIOC_SPECIAL_END 0xff
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/atmlec.h b/ANDROID_3.4.5/include/linux/atmlec.h
deleted file mode 100644
index 39c917fd..00000000
--- a/ANDROID_3.4.5/include/linux/atmlec.h
+++ /dev/null
@@ -1,98 +0,0 @@
-/*
- * ATM Lan Emulation Daemon driver interface
- *
- * Marko Kiiskila <mkiiskila@yahoo.com>
- */
-
-#ifndef _ATMLEC_H_
-#define _ATMLEC_H_
-
-#include <linux/atmapi.h>
-#include <linux/atmioc.h>
-#include <linux/atm.h>
-#include <linux/if_ether.h>
-#include <linux/types.h>
-
-/* ATM lec daemon control socket */
-#define ATMLEC_CTRL	_IO('a', ATMIOC_LANE)
-#define ATMLEC_DATA	_IO('a', ATMIOC_LANE+1)
-#define ATMLEC_MCAST	_IO('a', ATMIOC_LANE+2)
-
-/* Maximum number of LEC interfaces (tweakable) */
-#define MAX_LEC_ITF 48
-
-/*
- * From the total of MAX_LEC_ITF, last NUM_TR_DEVS are reserved for Token Ring.
- * E.g. if MAX_LEC_ITF = 48 and NUM_TR_DEVS = 8, then lec0-lec39 are for
- * Ethernet ELANs and lec40-lec47 are for Token Ring ELANS.
- */
-#define NUM_TR_DEVS 8
-
-typedef enum {
-	l_set_mac_addr,
-	l_del_mac_addr,
-	l_svc_setup,
-	l_addr_delete,
-	l_topology_change,
-	l_flush_complete,
-	l_arp_update,
-	l_narp_req,		/* LANE2 mandates the use of this */
-	l_config,
-	l_flush_tran_id,
-	l_set_lecid,
-	l_arp_xmt,
-	l_rdesc_arp_xmt,
-	l_associate_req,
-	l_should_bridge		/* should we bridge this MAC? */
-} atmlec_msg_type;
-
-#define ATMLEC_MSG_TYPE_MAX l_should_bridge
-
-struct atmlec_config_msg {
-	unsigned int maximum_unknown_frame_count;
-	unsigned int max_unknown_frame_time;
-	unsigned short max_retry_count;
-	unsigned int aging_time;
-	unsigned int forward_delay_time;
-	unsigned int arp_response_time;
-	unsigned int flush_timeout;
-	unsigned int path_switching_delay;
-	unsigned int lane_version;	/* LANE2: 1 for LANEv1, 2 for LANEv2 */
-	int mtu;
-	int is_proxy;
-};
-
-struct atmlec_msg {
-	atmlec_msg_type type;
-	int sizeoftlvs;		/* LANE2: if != 0, tlvs follow */
-	union {
-		struct {
-			unsigned char mac_addr[ETH_ALEN];
-			unsigned char atm_addr[ATM_ESA_LEN];
-			unsigned int flag;	/*
-						 * Topology_change flag,
-						 * remoteflag, permanent flag,
-						 * lecid, transaction id
-						 */
-			unsigned int targetless_le_arp;	/* LANE2 */
-			unsigned int no_source_le_narp;	/* LANE2 */
-		} normal;
-		struct atmlec_config_msg config;
-		struct {
-			__u16 lec_id;				/* requestor lec_id  */
-			__u32 tran_id;				/* transaction id    */
-			unsigned char mac_addr[ETH_ALEN];	/* dst mac addr      */
-			unsigned char atm_addr[ATM_ESA_LEN];	/* reqestor ATM addr */
-		} proxy;	/*
-				 * For mapping LE_ARP requests to responses. Filled by
-				 * zeppelin, returned by kernel. Used only when proxying
-				 */
-	} content;
-} __ATM_API_ALIGN;
-
-struct atmlec_ioc {
-	int dev_num;
-	unsigned char atm_addr[ATM_ESA_LEN];
-	unsigned char receive;	/* 1= receive vcc, 0 = send vcc */
-};
-#endif /* _ATMLEC_H_ */
diff --git a/ANDROID_3.4.5/include/linux/atmmpc.h b/ANDROID_3.4.5/include/linux/atmmpc.h
deleted file mode 100644
index 2aba5787..00000000
--- a/ANDROID_3.4.5/include/linux/atmmpc.h
+++ /dev/null
@@ -1,126 +0,0 @@
-#ifndef _ATMMPC_H_
-#define _ATMMPC_H_
-
-#include <linux/atmapi.h>
-#include <linux/atmioc.h>
-#include <linux/atm.h>
-#include <linux/types.h>
-
-#define ATMMPC_CTRL _IO('a', ATMIOC_MPOA)
-#define ATMMPC_DATA _IO('a', ATMIOC_MPOA+1)
-
-#define MPC_SOCKET_INGRESS 1
-#define MPC_SOCKET_EGRESS  2
-
-struct atmmpc_ioc {
-        int dev_num;
-        __be32 ipaddr;              /* the IP address of the shortcut    */
-        int type;                     /* ingress or egress                 */
-};
-
-typedef struct in_ctrl_info {
-        __u8   Last_NHRP_CIE_code;
-        __u8   Last_Q2931_cause_value;
-        __u8   eg_MPC_ATM_addr[ATM_ESA_LEN];
-        __be32  tag;
-        __be32  in_dst_ip;      /* IP address this ingress MPC sends packets to */
-        __u16  holding_time;
-        __u32  request_id;
-} in_ctrl_info;
-
-typedef struct eg_ctrl_info {
-        __u8   DLL_header[256];
-        __u8   DH_length;
-        __be32  cache_id;
-        __be32  tag;
-        __be32  mps_ip;
-        __be32  eg_dst_ip;      /* IP address to which ingress MPC sends packets */
-        __u8   in_MPC_data_ATM_addr[ATM_ESA_LEN];
-        __u16  holding_time;
-} eg_ctrl_info;
-
-struct mpc_parameters {
-        __u16 mpc_p1;   /* Shortcut-Setup Frame Count    */
-        __u16 mpc_p2;   /* Shortcut-Setup Frame Time     */
-        __u8 mpc_p3[8]; /* Flow-detection Protocols      */
-        __u16 mpc_p4;   /* MPC Initial Retry Time        */
-        __u16 mpc_p5;   /* MPC Retry Time Maximum        */
-        __u16 mpc_p6;   /* Hold Down Time                */
-} ;
-
-struct k_message {
-        __u16 type;
-        __be32 ip_mask;
-        __u8  MPS_ctrl[ATM_ESA_LEN];
-        union {
-                in_ctrl_info in_info;
-                eg_ctrl_info eg_info;
-                struct mpc_parameters params;
-        } content;
-        struct atm_qos qos;       
-} __ATM_API_ALIGN;
-
-struct llc_snap_hdr {
-	/* RFC 1483 LLC/SNAP encapsulation for routed IP PDUs */
-        __u8  dsap;    /* Destination Service Access Point (0xAA)     */
-        __u8  ssap;    /* Source Service Access Point      (0xAA)     */
-        __u8  ui;      /* Unnumbered Information           (0x03)     */
-        __u8  org[3];  /* Organizational identification    (0x000000) */
-        __u8  type[2]; /* Ether type (for IP)              (0x0800)   */
-};
-
-/* TLVs this MPC recognizes */
-#define TLV_MPOA_DEVICE_TYPE         0x00a03e2a  
-
-/* MPOA device types in MPOA Device Type TLV */
-#define NON_MPOA    0
-#define MPS         1
-#define MPC         2
-#define MPS_AND_MPC 3
-
-
-/* MPC parameter defaults */
-
-#define MPC_P1 10  /* Shortcut-Setup Frame Count  */ 
-#define MPC_P2 1   /* Shortcut-Setup Frame Time   */
-#define MPC_P3 0   /* Flow-detection Protocols    */
-#define MPC_P4 5   /* MPC Initial Retry Time      */
-#define MPC_P5 40  /* MPC Retry Time Maximum      */
-#define MPC_P6 160 /* Hold Down Time              */
-#define HOLDING_TIME_DEFAULT 1200 /* same as MPS-p7 */
-
-/* MPC constants */
-
-#define MPC_C1 2   /* Retry Time Multiplier       */
-#define MPC_C2 60  /* Initial Keep-Alive Lifetime */
-
-/* Message types - to MPOA daemon */
-
-#define SND_MPOA_RES_RQST    201
-#define SET_MPS_CTRL_ADDR    202
-#define SND_MPOA_RES_RTRY    203 /* Different type in a retry due to req id         */
-#define STOP_KEEP_ALIVE_SM   204
-#define EGRESS_ENTRY_REMOVED 205
-#define SND_EGRESS_PURGE     206
-#define DIE                  207 /* tell the daemon to exit()                       */
-#define DATA_PLANE_PURGE     208 /* Data plane purge because of egress cache hit miss or dead MPS */
-#define OPEN_INGRESS_SVC     209
-
-/* Message types - from MPOA daemon */
-
-#define MPOA_TRIGGER_RCVD     101
-#define MPOA_RES_REPLY_RCVD   102
-#define INGRESS_PURGE_RCVD    103
-#define EGRESS_PURGE_RCVD     104
-#define MPS_DEATH             105
-#define CACHE_IMPOS_RCVD      106
-#define SET_MPC_CTRL_ADDR     107 /* Our MPC's control ATM address   */
-#define SET_MPS_MAC_ADDR      108
-#define CLEAN_UP_AND_EXIT     109
-#define SET_MPC_PARAMS        110 /* MPC configuration parameters    */
-
-/* Message types - bidirectional */       
-
-#define RELOAD                301 /* kill -HUP the daemon for reload */
-
-#endif /* _ATMMPC_H_ */
diff --git a/ANDROID_3.4.5/include/linux/atmppp.h b/ANDROID_3.4.5/include/linux/atmppp.h
deleted file mode 100644
index 300dcce0..00000000
--- a/ANDROID_3.4.5/include/linux/atmppp.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/* atmppp.h - RFC2364 PPPoATM */
-
-/* Written 2000 by Mitchell Blank Jr */
-
-#ifndef _LINUX_ATMPPP_H
-#define _LINUX_ATMPPP_H
-
-#include <linux/atm.h>
-
-#define PPPOATM_ENCAPS_AUTODETECT	(0)
-#define PPPOATM_ENCAPS_VC		(1)
-#define PPPOATM_ENCAPS_LLC		(2)
-
-/*
- * This is for the ATM_SETBACKEND call - these are like socket families:
- * the first element of the structure is the backend number and the rest
- * is per-backend specific
- */
-struct atm_backend_ppp {
-	atm_backend_t	backend_num;	/* ATM_BACKEND_PPP */
-	int		encaps;		/* PPPOATM_ENCAPS_* */
-};
-
-#endif	/* _LINUX_ATMPPP_H */
diff --git a/ANDROID_3.4.5/include/linux/atmsap.h b/ANDROID_3.4.5/include/linux/atmsap.h
deleted file mode 100644
index 799b1045..00000000
--- a/ANDROID_3.4.5/include/linux/atmsap.h
+++ /dev/null
@@ -1,162 +0,0 @@
-/* atmsap.h - ATM Service Access Point addressing definitions */
-
-/* Written 1995-1999 by Werner Almesberger, EPFL LRC/ICA */
-
-
-#ifndef _LINUX_ATMSAP_H
-#define _LINUX_ATMSAP_H
-
-#include <linux/atmapi.h>
-
-/*
- * BEGIN_xx and END_xx markers are used for automatic generation of
- * documentation. Do not change them.
- */
-
-
-/*
- * Layer 2 protocol identifiers
- */
-
-/* BEGIN_L2 */
-#define ATM_L2_NONE	0	/* L2 not specified */
-#define ATM_L2_ISO1745  0x01	/* Basic mode ISO 1745 */
-#define ATM_L2_Q291	0x02	/* ITU-T Q.291 (Rec. I.441) */
-#define ATM_L2_X25_LL	0x06	/* ITU-T X.25, link layer */
-#define ATM_L2_X25_ML	0x07	/* ITU-T X.25, multilink */
-#define ATM_L2_LAPB	0x08	/* Extended LAPB, half-duplex (Rec. T.71) */
-#define ATM_L2_HDLC_ARM	0x09	/* HDLC ARM (ISO/IEC 4335) */
-#define ATM_L2_HDLC_NRM	0x0a	/* HDLC NRM (ISO/IEC 4335) */
-#define ATM_L2_HDLC_ABM	0x0b	/* HDLC ABM (ISO/IEC 4335) */
-#define ATM_L2_ISO8802	0x0c	/* LAN LLC (ISO/IEC 8802/2) */
-#define ATM_L2_X75	0x0d	/* ITU-T X.75, SLP */
-#define ATM_L2_Q922	0x0e	/* ITU-T Q.922 */
-#define ATM_L2_USER	0x10	/* user-specified */
-#define ATM_L2_ISO7776	0x11	/* ISO 7776 DTE-DTE */
-/* END_L2 */
-
-
-/*
- * Layer 3 protocol identifiers
- */
-
-/* BEGIN_L3 */
-#define ATM_L3_NONE	0	/* L3 not specified */
-#define ATM_L3_X25	0x06	/* ITU-T X.25, packet layer */
-#define ATM_L3_ISO8208	0x07	/* ISO/IEC 8208 */
-#define ATM_L3_X223	0x08	/* ITU-T X.223 | ISO/IEC 8878 */
-#define ATM_L3_ISO8473	0x09	/* ITU-T X.233 | ISO/IEC 8473 */
-#define ATM_L3_T70	0x0a	/* ITU-T T.70 minimum network layer */
-#define ATM_L3_TR9577	0x0b	/* ISO/IEC TR 9577 */
-#define ATM_L3_H310	0x0c	/* ITU-T Recommendation H.310 */
-#define ATM_L3_H321	0x0d	/* ITU-T Recommendation H.321 */
-#define ATM_L3_USER	0x10	/* user-specified */
-/* END_L3 */
-
-
-/*
- * High layer identifiers
- */
-
-/* BEGIN_HL */
-#define ATM_HL_NONE	0	/* HL not specified */
-#define ATM_HL_ISO	0x01	/* ISO */
-#define ATM_HL_USER	0x02	/* user-specific */
-#define ATM_HL_HLP	0x03	/* high layer profile - UNI 3.0 only */
-#define ATM_HL_VENDOR	0x04	/* vendor-specific application identifier */
-/* END_HL */
-
-
-/*
- * ITU-T coded mode of operation
- */
-
-/* BEGIN_IMD */
-#define ATM_IMD_NONE	 0	/* mode not specified */
-#define ATM_IMD_NORMAL	 1	/* normal mode of operation */
-#define ATM_IMD_EXTENDED 2	/* extended mode of operation */
-/* END_IMD */
-
-/*
- * H.310 code points
- */
-
-#define ATM_TT_NONE	0	/* terminal type not specified */
-#define ATM_TT_RX	1	/* receive only */
-#define ATM_TT_TX	2	/* send only */
-#define ATM_TT_RXTX	3	/* receive and send */
-
-#define ATM_MC_NONE	0	/* no multiplexing */
-#define ATM_MC_TS	1	/* transport stream (TS) */
-#define ATM_MC_TS_FEC	2	/* transport stream with forward error corr. */
-#define ATM_MC_PS	3	/* program stream (PS) */
-#define ATM_MC_PS_FEC	4	/* program stream with forward error corr. */
-#define ATM_MC_H221	5	/* ITU-T Rec. H.221 */
-
-/*
- * SAP structures
- */
-
-#define ATM_MAX_HLI	8	/* maximum high-layer information length */
-
-
-struct atm_blli {
-    unsigned char l2_proto;	/* layer 2 protocol */
-    union {
-	struct {
-	    unsigned char mode;	/* mode of operation (ATM_IMD_xxx), 0 if */
-				/* absent */
-	    unsigned char window; /* window size (k), 1-127 (0 to omit) */
-	} itu;			/* ITU-T encoding */
-	unsigned char user;	/* user-specified l2 information */
-    } l2;
-    unsigned char l3_proto;	/* layer 3 protocol */
-    union {
-	struct {
-	    unsigned char mode;	/* mode of operation (ATM_IMD_xxx), 0 if */
-				/* absent */
-	    unsigned char def_size; /* default packet size (log2), 4-12 (0 to */
-				    /* omit) */
-	    unsigned char window;/* packet window size, 1-127 (0 to omit) */
-	} itu;			/* ITU-T encoding */
-	unsigned char user;	/* user specified l3 information */
-	struct {		      /* if l3_proto = ATM_L3_H310 */
-	    unsigned char term_type;  /* terminal type */
-	    unsigned char fw_mpx_cap; /* forward multiplexing capability */
-				      /* only if term_type != ATM_TT_NONE */
-	    unsigned char bw_mpx_cap; /* backward multiplexing capability */
-				      /* only if term_type != ATM_TT_NONE */
-	} h310;
-	struct {		  /* if l3_proto = ATM_L3_TR9577 */
-	    unsigned char ipi;	  /* initial protocol id */
-	    unsigned char snap[5];/* IEEE 802.1 SNAP identifier */
-				  /* (only if ipi == NLPID_IEEE802_1_SNAP) */
-	} tr9577;
-    } l3;
-} __ATM_API_ALIGN;
-
-
-struct atm_bhli {
-    unsigned char hl_type;	/* high layer information type */
-    unsigned char hl_length;	/* length (only if hl_type == ATM_HL_USER || */
-				/* hl_type == ATM_HL_ISO) */
-    unsigned char hl_info[ATM_MAX_HLI];/* high layer information */
-};
-
-
-#define ATM_MAX_BLLI	3		/* maximum number of BLLI elements */
-
-
-struct atm_sap {
-	struct atm_bhli bhli;		/* local SAP, high-layer information */
-	struct atm_blli blli[ATM_MAX_BLLI] __ATM_API_ALIGN;
-					/* local SAP, low-layer info */
-};
-
-
-static __inline__ int blli_in_use(struct atm_blli blli)
-{
-	return blli.l2_proto || blli.l3_proto;
-}
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/atmsvc.h b/ANDROID_3.4.5/include/linux/atmsvc.h
deleted file mode 100644
index aa71583b..00000000
--- a/ANDROID_3.4.5/include/linux/atmsvc.h
+++ /dev/null
@@ -1,55 +0,0 @@
-/* atmsvc.h - ATM signaling kernel-demon interface definitions */
- 
-/* Written 1995-2000 by Werner Almesberger, EPFL LRC/ICA */
- 
-
-#ifndef _LINUX_ATMSVC_H
-#define _LINUX_ATMSVC_H
-
-#include <linux/atmapi.h>
-#include <linux/atm.h>
-#include <linux/atmioc.h>
-
-
-#define ATMSIGD_CTRL _IO('a',ATMIOC_SPECIAL)
-				/* become ATM signaling demon control socket */
-
-enum atmsvc_msg_type { as_catch_null, as_bind, as_connect, as_accept, as_reject,
-		       as_listen, as_okay, as_error, as_indicate, as_close,
-		       as_itf_notify, as_modify, as_identify, as_terminate,
-		       as_addparty, as_dropparty };
-
-struct atmsvc_msg {
-	enum atmsvc_msg_type type;
-	atm_kptr_t vcc;
-	atm_kptr_t listen_vcc;		/* indicate */
-	int reply;			/* for okay and close:		   */
-					/*   < 0: error before active	   */
-					/*        (sigd has discarded ctx) */
-					/*   ==0: success		   */
-				        /*   > 0: error when active (still */
-					/*        need to close)	   */
-	struct sockaddr_atmpvc pvc;	/* indicate, okay (connect) */
-	struct sockaddr_atmsvc local;	/* local SVC address */
-	struct atm_qos qos;		/* QOS parameters */
-	struct atm_sap sap;		/* SAP */
-	unsigned int session;		/* for p2pm */
-	struct sockaddr_atmsvc svc;	/* SVC address */
-} __ATM_API_ALIGN;
-
-/*
- * Message contents: see ftp://icaftp.epfl.ch/pub/linux/atm/docs/isp-*.tar.gz
- */
-
-/*
- * Some policy stuff for atmsigd and for net/atm/svc.c. Both have to agree on
- * what PCR is used to request bandwidth from the device driver. net/atm/svc.c
- * tries to do better than that, but only if there's no routing decision (i.e.
- * if signaling only uses one ATM interface).
- */
-
-#define SELECT_TOP_PCR(tp) ((tp).pcr ? (tp).pcr : \
-  (tp).max_pcr && (tp).max_pcr != ATM_MAX_PCR ? (tp).max_pcr : \
-  (tp).min_pcr ? (tp).min_pcr : ATM_MAX_PCR)
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/atomic.h b/ANDROID_3.4.5/include/linux/atomic.h
deleted file mode 100644
index 70cfcb2d..00000000
--- a/ANDROID_3.4.5/include/linux/atomic.h
+++ /dev/null
@@ -1,106 +0,0 @@
-/* Atomic operations usable in machine independent code */
-#ifndef _LINUX_ATOMIC_H
-#define _LINUX_ATOMIC_H
-#include <asm/atomic.h>
-
-/**
- * atomic_add_unless - add unless the number is already a given value
- * @v: pointer of type atomic_t
- * @a: the amount to add to v...
- * @u: ...unless v is equal to u.
- *
- * Atomically adds @a to @v, so long as @v was not already @u.
- * Returns non-zero if @v was not @u, and zero otherwise.
- */
-static inline int atomic_add_unless(atomic_t *v, int a, int u)
-{
-	return __atomic_add_unless(v, a, u) != u;
-}
-
-/**
- * atomic_inc_not_zero - increment unless the number is zero
- * @v: pointer of type atomic_t
- *
- * Atomically increments @v by 1, so long as @v is non-zero.
- * Returns non-zero if @v was non-zero, and zero otherwise.
- */
-#ifndef atomic_inc_not_zero
-#define atomic_inc_not_zero(v)		atomic_add_unless((v), 1, 0)
-#endif
-
-/**
- * atomic_inc_not_zero_hint - increment if not null
- * @v: pointer of type atomic_t
- * @hint: probable value of the atomic before the increment
- *
- * This version of atomic_inc_not_zero() gives a hint of probable
- * value of the atomic. This helps processor to not read the memory
- * before doing the atomic read/modify/write cycle, lowering
- * number of bus transactions on some arches.
- *
- * Returns: 0 if increment was not done, 1 otherwise.
- */
-#ifndef atomic_inc_not_zero_hint
-static inline int atomic_inc_not_zero_hint(atomic_t *v, int hint)
-{
-	int val, c = hint;
-
-	/* sanity test, should be removed by compiler if hint is a constant */
-	if (!hint)
-		return atomic_inc_not_zero(v);
-
-	do {
-		val = atomic_cmpxchg(v, c, c + 1);
-		if (val == c)
-			return 1;
-		c = val;
-	} while (c);
-
-	return 0;
-}
-#endif
-
-#ifndef atomic_inc_unless_negative
-static inline int atomic_inc_unless_negative(atomic_t *p)
-{
-	int v, v1;
-	for (v = 0; v >= 0; v = v1) {
-		v1 = atomic_cmpxchg(p, v, v + 1);
-		if (likely(v1 == v))
-			return 1;
-	}
-	return 0;
-}
-#endif
-
-#ifndef atomic_dec_unless_positive
-static inline int atomic_dec_unless_positive(atomic_t *p)
-{
-	int v, v1;
-	for (v = 0; v <= 0; v = v1) {
-		v1 = atomic_cmpxchg(p, v, v - 1);
-		if (likely(v1 == v))
-			return 1;
-	}
-	return 0;
-}
-#endif
-
-#ifndef CONFIG_ARCH_HAS_ATOMIC_OR
-static inline void atomic_or(int i, atomic_t *v)
-{
-	int old;
-	int new;
-
-	do {
-		old = atomic_read(v);
-		new = old | i;
-	} while (atomic_cmpxchg(v, old, new) != old);
-}
-#endif /* #ifndef CONFIG_ARCH_HAS_ATOMIC_OR */
-
-#include <asm-generic/atomic-long.h>
-#ifdef CONFIG_GENERIC_ATOMIC64
-#include <asm-generic/atomic64.h>
-#endif
-#endif /* _LINUX_ATOMIC_H */
diff --git a/ANDROID_3.4.5/include/linux/attribute_container.h b/ANDROID_3.4.5/include/linux/attribute_container.h
deleted file mode 100644
index 896c6892..00000000
--- a/ANDROID_3.4.5/include/linux/attribute_container.h
+++ /dev/null
@@ -1,72 +0,0 @@
-/*
- * attribute_container.h - a generic container for all classes
- *
- * Copyright (c) 2005 - James Bottomley <James.Bottomley@steeleye.com>
- *
- * This file is licensed under GPLv2
- */
-
-#ifndef _ATTRIBUTE_CONTAINER_H_
-#define _ATTRIBUTE_CONTAINER_H_
-
-#include <linux/list.h>
-#include <linux/klist.h>
-
-struct device;
-
-struct attribute_container {
-	struct list_head	node;
-	struct klist		containers;
-	struct class		*class;
-	const struct attribute_group *grp;
-	struct device_attribute **attrs;
-	int (*match)(struct attribute_container *, struct device *);
-#define	ATTRIBUTE_CONTAINER_NO_CLASSDEVS	0x01
-	unsigned long		flags;
-};
-
-static inline int
-attribute_container_no_classdevs(struct attribute_container *atc)
-{
-	return atc->flags & ATTRIBUTE_CONTAINER_NO_CLASSDEVS;
-}
-
-static inline void
-attribute_container_set_no_classdevs(struct attribute_container *atc)
-{
-	atc->flags |= ATTRIBUTE_CONTAINER_NO_CLASSDEVS;
-}
-
-int attribute_container_register(struct attribute_container *cont);
-int __must_check attribute_container_unregister(struct attribute_container *cont);
-void attribute_container_create_device(struct device *dev,
-				       int (*fn)(struct attribute_container *,
-						 struct device *,
-						 struct device *));
-void attribute_container_add_device(struct device *dev,
-				    int (*fn)(struct attribute_container *,
-					      struct device *,
-					      struct device *));
-void attribute_container_remove_device(struct device *dev,
-				       void (*fn)(struct attribute_container *,
-						  struct device *,
-						  struct device *));
-void attribute_container_device_trigger(struct device *dev, 
-					int (*fn)(struct attribute_container *,
-						  struct device *,
-						  struct device *));
-void attribute_container_trigger(struct device *dev, 
-				 int (*fn)(struct attribute_container *,
-					   struct device *));
-int attribute_container_add_attrs(struct device *classdev);
-int attribute_container_add_class_device(struct device *classdev);
-int attribute_container_add_class_device_adapter(struct attribute_container *cont,
-						 struct device *dev,
-						 struct device *classdev);
-void attribute_container_remove_attrs(struct device *classdev);
-void attribute_container_class_device_del(struct device *classdev);
-struct attribute_container *attribute_container_classdev_to_container(struct device *);
-struct device *attribute_container_find_class_device(struct attribute_container *, struct device *);
-struct device_attribute **attribute_container_classdev_to_attrs(const struct device *classdev);
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/audit.h b/ANDROID_3.4.5/include/linux/audit.h
deleted file mode 100644
index ed3ef197..00000000
--- a/ANDROID_3.4.5/include/linux/audit.h
+++ /dev/null
@@ -1,723 +0,0 @@
-/* audit.h -- Auditing support
- *
- * Copyright 2003-2004 Red Hat Inc., Durham, North Carolina.
- * All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- * Written by Rickard E. (Rik) Faith <faith@redhat.com>
- *
- */
-
-#ifndef _LINUX_AUDIT_H_
-#define _LINUX_AUDIT_H_
-
-#include <linux/types.h>
-#include <linux/elf-em.h>
-#include <linux/ptrace.h>
-
-/* The netlink messages for the audit system is divided into blocks:
- * 1000 - 1099 are for commanding the audit system
- * 1100 - 1199 user space trusted application messages
- * 1200 - 1299 messages internal to the audit daemon
- * 1300 - 1399 audit event messages
- * 1400 - 1499 SE Linux use
- * 1500 - 1599 kernel LSPP events
- * 1600 - 1699 kernel crypto events
- * 1700 - 1799 kernel anomaly records
- * 1800 - 1899 kernel integrity events
- * 1900 - 1999 future kernel use
- * 2000 is for otherwise unclassified kernel audit messages (legacy)
- * 2001 - 2099 unused (kernel)
- * 2100 - 2199 user space anomaly records
- * 2200 - 2299 user space actions taken in response to anomalies
- * 2300 - 2399 user space generated LSPP events
- * 2400 - 2499 user space crypto events
- * 2500 - 2999 future user space (maybe integrity labels and related events)
- *
- * Messages from 1000-1199 are bi-directional. 1200-1299 & 2100 - 2999 are
- * exclusively user space. 1300-2099 is kernel --> user space 
- * communication.
- */
-#define AUDIT_GET		1000	/* Get status */
-#define AUDIT_SET		1001	/* Set status (enable/disable/auditd) */
-#define AUDIT_LIST		1002	/* List syscall rules -- deprecated */
-#define AUDIT_ADD		1003	/* Add syscall rule -- deprecated */
-#define AUDIT_DEL		1004	/* Delete syscall rule -- deprecated */
-#define AUDIT_USER		1005	/* Message from userspace -- deprecated */
-#define AUDIT_LOGIN		1006	/* Define the login id and information */
-#define AUDIT_WATCH_INS		1007	/* Insert file/dir watch entry */
-#define AUDIT_WATCH_REM		1008	/* Remove file/dir watch entry */
-#define AUDIT_WATCH_LIST	1009	/* List all file/dir watches */
-#define AUDIT_SIGNAL_INFO	1010	/* Get info about sender of signal to auditd */
-#define AUDIT_ADD_RULE		1011	/* Add syscall filtering rule */
-#define AUDIT_DEL_RULE		1012	/* Delete syscall filtering rule */
-#define AUDIT_LIST_RULES	1013	/* List syscall filtering rules */
-#define AUDIT_TRIM		1014	/* Trim junk from watched tree */
-#define AUDIT_MAKE_EQUIV	1015	/* Append to watched tree */
-#define AUDIT_TTY_GET		1016	/* Get TTY auditing status */
-#define AUDIT_TTY_SET		1017	/* Set TTY auditing status */
-
-#define AUDIT_FIRST_USER_MSG	1100	/* Userspace messages mostly uninteresting to kernel */
-#define AUDIT_USER_AVC		1107	/* We filter this differently */
-#define AUDIT_USER_TTY		1124	/* Non-ICANON TTY input meaning */
-#define AUDIT_LAST_USER_MSG	1199
-#define AUDIT_FIRST_USER_MSG2	2100	/* More user space messages */
-#define AUDIT_LAST_USER_MSG2	2999
- 
-#define AUDIT_DAEMON_START      1200    /* Daemon startup record */
-#define AUDIT_DAEMON_END        1201    /* Daemon normal stop record */
-#define AUDIT_DAEMON_ABORT      1202    /* Daemon error stop record */
-#define AUDIT_DAEMON_CONFIG     1203    /* Daemon config change */
-
-#define AUDIT_SYSCALL		1300	/* Syscall event */
-/* #define AUDIT_FS_WATCH	1301	 * Deprecated */
-#define AUDIT_PATH		1302	/* Filename path information */
-#define AUDIT_IPC		1303	/* IPC record */
-#define AUDIT_SOCKETCALL	1304	/* sys_socketcall arguments */
-#define AUDIT_CONFIG_CHANGE	1305	/* Audit system configuration change */
-#define AUDIT_SOCKADDR		1306	/* sockaddr copied as syscall arg */
-#define AUDIT_CWD		1307	/* Current working directory */
-#define AUDIT_EXECVE		1309	/* execve arguments */
-#define AUDIT_IPC_SET_PERM	1311	/* IPC new permissions record type */
-#define AUDIT_MQ_OPEN		1312	/* POSIX MQ open record type */
-#define AUDIT_MQ_SENDRECV	1313	/* POSIX MQ send/receive record type */
-#define AUDIT_MQ_NOTIFY		1314	/* POSIX MQ notify record type */
-#define AUDIT_MQ_GETSETATTR	1315	/* POSIX MQ get/set attribute record type */
-#define AUDIT_KERNEL_OTHER	1316	/* For use by 3rd party modules */
-#define AUDIT_FD_PAIR		1317    /* audit record for pipe/socketpair */
-#define AUDIT_OBJ_PID		1318	/* ptrace target */
-#define AUDIT_TTY		1319	/* Input on an administrative TTY */
-#define AUDIT_EOE		1320	/* End of multi-record event */
-#define AUDIT_BPRM_FCAPS	1321	/* Information about fcaps increasing perms */
-#define AUDIT_CAPSET		1322	/* Record showing argument to sys_capset */
-#define AUDIT_MMAP		1323	/* Record showing descriptor and flags in mmap */
-#define AUDIT_NETFILTER_PKT	1324	/* Packets traversing netfilter chains */
-#define AUDIT_NETFILTER_CFG	1325	/* Netfilter chain modifications */
-
-#define AUDIT_AVC		1400	/* SE Linux avc denial or grant */
-#define AUDIT_SELINUX_ERR	1401	/* Internal SE Linux Errors */
-#define AUDIT_AVC_PATH		1402	/* dentry, vfsmount pair from avc */
-#define AUDIT_MAC_POLICY_LOAD	1403	/* Policy file load */
-#define AUDIT_MAC_STATUS	1404	/* Changed enforcing,permissive,off */
-#define AUDIT_MAC_CONFIG_CHANGE	1405	/* Changes to booleans */
-#define AUDIT_MAC_UNLBL_ALLOW	1406	/* NetLabel: allow unlabeled traffic */
-#define AUDIT_MAC_CIPSOV4_ADD	1407	/* NetLabel: add CIPSOv4 DOI entry */
-#define AUDIT_MAC_CIPSOV4_DEL	1408	/* NetLabel: del CIPSOv4 DOI entry */
-#define AUDIT_MAC_MAP_ADD	1409	/* NetLabel: add LSM domain mapping */
-#define AUDIT_MAC_MAP_DEL	1410	/* NetLabel: del LSM domain mapping */
-#define AUDIT_MAC_IPSEC_ADDSA	1411	/* Not used */
-#define AUDIT_MAC_IPSEC_DELSA	1412	/* Not used  */
-#define AUDIT_MAC_IPSEC_ADDSPD	1413	/* Not used */
-#define AUDIT_MAC_IPSEC_DELSPD	1414	/* Not used */
-#define AUDIT_MAC_IPSEC_EVENT	1415	/* Audit an IPSec event */
-#define AUDIT_MAC_UNLBL_STCADD	1416	/* NetLabel: add a static label */
-#define AUDIT_MAC_UNLBL_STCDEL	1417	/* NetLabel: del a static label */
-
-#define AUDIT_FIRST_KERN_ANOM_MSG   1700
-#define AUDIT_LAST_KERN_ANOM_MSG    1799
-#define AUDIT_ANOM_PROMISCUOUS      1700 /* Device changed promiscuous mode */
-#define AUDIT_ANOM_ABEND            1701 /* Process ended abnormally */
-#define AUDIT_INTEGRITY_DATA	    1800 /* Data integrity verification */
-#define AUDIT_INTEGRITY_METADATA    1801 /* Metadata integrity verification */
-#define AUDIT_INTEGRITY_STATUS	    1802 /* Integrity enable status */
-#define AUDIT_INTEGRITY_HASH	    1803 /* Integrity HASH type */
-#define AUDIT_INTEGRITY_PCR	    1804 /* PCR invalidation msgs */
-#define AUDIT_INTEGRITY_RULE	    1805 /* policy rule */
-
-#define AUDIT_KERNEL		2000	/* Asynchronous audit record. NOT A REQUEST. */
-
-/* Rule flags */
-#define AUDIT_FILTER_USER	0x00	/* Apply rule to user-generated messages */
-#define AUDIT_FILTER_TASK	0x01	/* Apply rule at task creation (not syscall) */
-#define AUDIT_FILTER_ENTRY	0x02	/* Apply rule at syscall entry */
-#define AUDIT_FILTER_WATCH	0x03	/* Apply rule to file system watches */
-#define AUDIT_FILTER_EXIT	0x04	/* Apply rule at syscall exit */
-#define AUDIT_FILTER_TYPE	0x05	/* Apply rule at audit_log_start */
-
-#define AUDIT_NR_FILTERS	6
-
-#define AUDIT_FILTER_PREPEND	0x10	/* Prepend to front of list */
-
-/* Rule actions */
-#define AUDIT_NEVER    0	/* Do not build context if rule matches */
-#define AUDIT_POSSIBLE 1	/* Build context if rule matches  */
-#define AUDIT_ALWAYS   2	/* Generate audit record if rule matches */
-
-/* Rule structure sizes -- if these change, different AUDIT_ADD and
- * AUDIT_LIST commands must be implemented. */
-#define AUDIT_MAX_FIELDS   64
-#define AUDIT_MAX_KEY_LEN  256
-#define AUDIT_BITMASK_SIZE 64
-#define AUDIT_WORD(nr) ((__u32)((nr)/32))
-#define AUDIT_BIT(nr)  (1 << ((nr) - AUDIT_WORD(nr)*32))
-
-#define AUDIT_SYSCALL_CLASSES 16
-#define AUDIT_CLASS_DIR_WRITE 0
-#define AUDIT_CLASS_DIR_WRITE_32 1
-#define AUDIT_CLASS_CHATTR 2
-#define AUDIT_CLASS_CHATTR_32 3
-#define AUDIT_CLASS_READ 4
-#define AUDIT_CLASS_READ_32 5
-#define AUDIT_CLASS_WRITE 6
-#define AUDIT_CLASS_WRITE_32 7
-#define AUDIT_CLASS_SIGNAL 8
-#define AUDIT_CLASS_SIGNAL_32 9
-
-/* This bitmask is used to validate user input.  It represents all bits that
- * are currently used in an audit field constant understood by the kernel.
- * If you are adding a new #define AUDIT_<whatever>, please ensure that
- * AUDIT_UNUSED_BITS is updated if need be. */
-#define AUDIT_UNUSED_BITS	0x07FFFC00
-
-/* AUDIT_FIELD_COMPARE rule list */
-#define AUDIT_COMPARE_UID_TO_OBJ_UID	1
-#define AUDIT_COMPARE_GID_TO_OBJ_GID	2
-#define AUDIT_COMPARE_EUID_TO_OBJ_UID	3
-#define AUDIT_COMPARE_EGID_TO_OBJ_GID	4
-#define AUDIT_COMPARE_AUID_TO_OBJ_UID	5
-#define AUDIT_COMPARE_SUID_TO_OBJ_UID	6
-#define AUDIT_COMPARE_SGID_TO_OBJ_GID	7
-#define AUDIT_COMPARE_FSUID_TO_OBJ_UID	8
-#define AUDIT_COMPARE_FSGID_TO_OBJ_GID	9
-
-#define AUDIT_COMPARE_UID_TO_AUID	10
-#define AUDIT_COMPARE_UID_TO_EUID	11
-#define AUDIT_COMPARE_UID_TO_FSUID	12
-#define AUDIT_COMPARE_UID_TO_SUID	13
-
-#define AUDIT_COMPARE_AUID_TO_FSUID	14
-#define AUDIT_COMPARE_AUID_TO_SUID	15
-#define AUDIT_COMPARE_AUID_TO_EUID	16
-
-#define AUDIT_COMPARE_EUID_TO_SUID	17
-#define AUDIT_COMPARE_EUID_TO_FSUID	18
-
-#define AUDIT_COMPARE_SUID_TO_FSUID	19
-
-#define AUDIT_COMPARE_GID_TO_EGID	20
-#define AUDIT_COMPARE_GID_TO_FSGID	21
-#define AUDIT_COMPARE_GID_TO_SGID	22
-
-#define AUDIT_COMPARE_EGID_TO_FSGID	23
-#define AUDIT_COMPARE_EGID_TO_SGID	24
-#define AUDIT_COMPARE_SGID_TO_FSGID	25
-
-#define AUDIT_MAX_FIELD_COMPARE		AUDIT_COMPARE_SGID_TO_FSGID
-
-/* Rule fields */
-				/* These are useful when checking the
-				 * task structure at task creation time
-				 * (AUDIT_PER_TASK).  */
-#define AUDIT_PID	0
-#define AUDIT_UID	1
-#define AUDIT_EUID	2
-#define AUDIT_SUID	3
-#define AUDIT_FSUID	4
-#define AUDIT_GID	5
-#define AUDIT_EGID	6
-#define AUDIT_SGID	7
-#define AUDIT_FSGID	8
-#define AUDIT_LOGINUID	9
-#define AUDIT_PERS	10
-#define AUDIT_ARCH	11
-#define AUDIT_MSGTYPE	12
-#define AUDIT_SUBJ_USER	13	/* security label user */
-#define AUDIT_SUBJ_ROLE	14	/* security label role */
-#define AUDIT_SUBJ_TYPE	15	/* security label type */
-#define AUDIT_SUBJ_SEN	16	/* security label sensitivity label */
-#define AUDIT_SUBJ_CLR	17	/* security label clearance label */
-#define AUDIT_PPID	18
-#define AUDIT_OBJ_USER	19
-#define AUDIT_OBJ_ROLE	20
-#define AUDIT_OBJ_TYPE	21
-#define AUDIT_OBJ_LEV_LOW	22
-#define AUDIT_OBJ_LEV_HIGH	23
-
-				/* These are ONLY useful when checking
-				 * at syscall exit time (AUDIT_AT_EXIT). */
-#define AUDIT_DEVMAJOR	100
-#define AUDIT_DEVMINOR	101
-#define AUDIT_INODE	102
-#define AUDIT_EXIT	103
-#define AUDIT_SUCCESS   104	/* exit >= 0; value ignored */
-#define AUDIT_WATCH	105
-#define AUDIT_PERM	106
-#define AUDIT_DIR	107
-#define AUDIT_FILETYPE	108
-#define AUDIT_OBJ_UID	109
-#define AUDIT_OBJ_GID	110
-#define AUDIT_FIELD_COMPARE	111
-
-#define AUDIT_ARG0      200
-#define AUDIT_ARG1      (AUDIT_ARG0+1)
-#define AUDIT_ARG2      (AUDIT_ARG0+2)
-#define AUDIT_ARG3      (AUDIT_ARG0+3)
-
-#define AUDIT_FILTERKEY	210
-
-#define AUDIT_NEGATE			0x80000000
-
-/* These are the supported operators.
- *	4  2  1  8
- *	=  >  <  ?
- *	----------
- *	0  0  0	 0	00	nonsense
- *	0  0  0	 1	08	&  bit mask
- *	0  0  1	 0	10	<
- *	0  1  0	 0	20	>
- *	0  1  1	 0	30	!=
- *	1  0  0	 0	40	=
- *	1  0  0	 1	48	&=  bit test
- *	1  0  1	 0	50	<=
- *	1  1  0	 0	60	>=
- *	1  1  1	 1	78	all operators
- */
-#define AUDIT_BIT_MASK			0x08000000
-#define AUDIT_LESS_THAN			0x10000000
-#define AUDIT_GREATER_THAN		0x20000000
-#define AUDIT_NOT_EQUAL			0x30000000
-#define AUDIT_EQUAL			0x40000000
-#define AUDIT_BIT_TEST			(AUDIT_BIT_MASK|AUDIT_EQUAL)
-#define AUDIT_LESS_THAN_OR_EQUAL	(AUDIT_LESS_THAN|AUDIT_EQUAL)
-#define AUDIT_GREATER_THAN_OR_EQUAL	(AUDIT_GREATER_THAN|AUDIT_EQUAL)
-#define AUDIT_OPERATORS			(AUDIT_EQUAL|AUDIT_NOT_EQUAL|AUDIT_BIT_MASK)
-
-enum {
-	Audit_equal,
-	Audit_not_equal,
-	Audit_bitmask,
-	Audit_bittest,
-	Audit_lt,
-	Audit_gt,
-	Audit_le,
-	Audit_ge,
-	Audit_bad
-};
-
-/* Status symbols */
-				/* Mask values */
-#define AUDIT_STATUS_ENABLED		0x0001
-#define AUDIT_STATUS_FAILURE		0x0002
-#define AUDIT_STATUS_PID		0x0004
-#define AUDIT_STATUS_RATE_LIMIT		0x0008
-#define AUDIT_STATUS_BACKLOG_LIMIT	0x0010
-				/* Failure-to-log actions */
-#define AUDIT_FAIL_SILENT	0
-#define AUDIT_FAIL_PRINTK	1
-#define AUDIT_FAIL_PANIC	2
-
-/* distinguish syscall tables */
-#define __AUDIT_ARCH_64BIT 0x80000000
-#define __AUDIT_ARCH_LE	   0x40000000
-#define AUDIT_ARCH_ALPHA	(EM_ALPHA|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE)
-#define AUDIT_ARCH_ARM		(EM_ARM|__AUDIT_ARCH_LE)
-#define AUDIT_ARCH_ARMEB	(EM_ARM)
-#define AUDIT_ARCH_CRIS		(EM_CRIS|__AUDIT_ARCH_LE)
-#define AUDIT_ARCH_FRV		(EM_FRV)
-#define AUDIT_ARCH_H8300	(EM_H8_300)
-#define AUDIT_ARCH_I386		(EM_386|__AUDIT_ARCH_LE)
-#define AUDIT_ARCH_IA64		(EM_IA_64|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE)
-#define AUDIT_ARCH_M32R		(EM_M32R)
-#define AUDIT_ARCH_M68K		(EM_68K)
-#define AUDIT_ARCH_MIPS		(EM_MIPS)
-#define AUDIT_ARCH_MIPSEL	(EM_MIPS|__AUDIT_ARCH_LE)
-#define AUDIT_ARCH_MIPS64	(EM_MIPS|__AUDIT_ARCH_64BIT)
-#define AUDIT_ARCH_MIPSEL64	(EM_MIPS|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE)
-#define AUDIT_ARCH_PARISC	(EM_PARISC)
-#define AUDIT_ARCH_PARISC64	(EM_PARISC|__AUDIT_ARCH_64BIT)
-#define AUDIT_ARCH_PPC		(EM_PPC)
-#define AUDIT_ARCH_PPC64	(EM_PPC64|__AUDIT_ARCH_64BIT)
-#define AUDIT_ARCH_S390		(EM_S390)
-#define AUDIT_ARCH_S390X	(EM_S390|__AUDIT_ARCH_64BIT)
-#define AUDIT_ARCH_SH		(EM_SH)
-#define AUDIT_ARCH_SHEL		(EM_SH|__AUDIT_ARCH_LE)
-#define AUDIT_ARCH_SH64		(EM_SH|__AUDIT_ARCH_64BIT)
-#define AUDIT_ARCH_SHEL64	(EM_SH|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE)
-#define AUDIT_ARCH_SPARC	(EM_SPARC)
-#define AUDIT_ARCH_SPARC64	(EM_SPARCV9|__AUDIT_ARCH_64BIT)
-#define AUDIT_ARCH_X86_64	(EM_X86_64|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE)
-
-#define AUDIT_PERM_EXEC		1
-#define AUDIT_PERM_WRITE	2
-#define AUDIT_PERM_READ		4
-#define AUDIT_PERM_ATTR		8
-
-struct audit_status {
-	__u32		mask;		/* Bit mask for valid entries */
-	__u32		enabled;	/* 1 = enabled, 0 = disabled */
-	__u32		failure;	/* Failure-to-log action */
-	__u32		pid;		/* pid of auditd process */
-	__u32		rate_limit;	/* messages rate limit (per second) */
-	__u32		backlog_limit;	/* waiting messages limit */
-	__u32		lost;		/* messages lost */
-	__u32		backlog;	/* messages waiting in queue */
-};
-
-struct audit_tty_status {
-	__u32		enabled; /* 1 = enabled, 0 = disabled */
-};
-
-/* audit_rule_data supports filter rules with both integer and string
- * fields.  It corresponds with AUDIT_ADD_RULE, AUDIT_DEL_RULE and
- * AUDIT_LIST_RULES requests.
- */
-struct audit_rule_data {
-	__u32		flags;	/* AUDIT_PER_{TASK,CALL}, AUDIT_PREPEND */
-	__u32		action;	/* AUDIT_NEVER, AUDIT_POSSIBLE, AUDIT_ALWAYS */
-	__u32		field_count;
-	__u32		mask[AUDIT_BITMASK_SIZE]; /* syscall(s) affected */
-	__u32		fields[AUDIT_MAX_FIELDS];
-	__u32		values[AUDIT_MAX_FIELDS];
-	__u32		fieldflags[AUDIT_MAX_FIELDS];
-	__u32		buflen;	/* total length of string fields */
-	char		buf[0];	/* string fields buffer */
-};
-
-/* audit_rule is supported to maintain backward compatibility with
- * userspace.  It supports integer fields only and corresponds to
- * AUDIT_ADD, AUDIT_DEL and AUDIT_LIST requests.
- */
-struct audit_rule {		/* for AUDIT_LIST, AUDIT_ADD, and AUDIT_DEL */
-	__u32		flags;	/* AUDIT_PER_{TASK,CALL}, AUDIT_PREPEND */
-	__u32		action;	/* AUDIT_NEVER, AUDIT_POSSIBLE, AUDIT_ALWAYS */
-	__u32		field_count;
-	__u32		mask[AUDIT_BITMASK_SIZE];
-	__u32		fields[AUDIT_MAX_FIELDS];
-	__u32		values[AUDIT_MAX_FIELDS];
-};
-
-#ifdef __KERNEL__
-#include <linux/sched.h>
-
-struct audit_sig_info {
-	uid_t		uid;
-	pid_t		pid;
-	char		ctx[0];
-};
-
-struct audit_buffer;
-struct audit_context;
-struct inode;
-struct netlink_skb_parms;
-struct path;
-struct linux_binprm;
-struct mq_attr;
-struct mqstat;
-struct audit_watch;
-struct audit_tree;
-
-struct audit_krule {
-	int			vers_ops;
-	u32			flags;
-	u32			listnr;
-	u32			action;
-	u32			mask[AUDIT_BITMASK_SIZE];
-	u32			buflen; /* for data alloc on list rules */
-	u32			field_count;
-	char			*filterkey; /* ties events to rules */
-	struct audit_field	*fields;
-	struct audit_field	*arch_f; /* quick access to arch field */
-	struct audit_field	*inode_f; /* quick access to an inode field */
-	struct audit_watch	*watch;	/* associated watch */
-	struct audit_tree	*tree;	/* associated watched tree */
-	struct list_head	rlist;	/* entry in audit_{watch,tree}.rules list */
-	struct list_head	list;	/* for AUDIT_LIST* purposes only */
-	u64			prio;
-};
-
-struct audit_field {
-	u32				type;
-	u32				val;
-	u32				op;
-	char				*lsm_str;
-	void				*lsm_rule;
-};
-
-extern int __init audit_register_class(int class, unsigned *list);
-extern int audit_classify_syscall(int abi, unsigned syscall);
-extern int audit_classify_arch(int arch);
-#ifdef CONFIG_AUDITSYSCALL
-/* These are defined in auditsc.c */
-				/* Public API */
-extern int  audit_alloc(struct task_struct *task);
-extern void __audit_free(struct task_struct *task);
-extern void __audit_syscall_entry(int arch,
-				  int major, unsigned long a0, unsigned long a1,
-				  unsigned long a2, unsigned long a3);
-extern void __audit_syscall_exit(int ret_success, long ret_value);
-extern void __audit_getname(const char *name);
-extern void audit_putname(const char *name);
-extern void __audit_inode(const char *name, const struct dentry *dentry);
-extern void __audit_inode_child(const struct dentry *dentry,
-				const struct inode *parent);
-extern void __audit_seccomp(unsigned long syscall);
-extern void __audit_ptrace(struct task_struct *t);
-
-static inline int audit_dummy_context(void)
-{
-	void *p = current->audit_context;
-	return !p || *(int *)p;
-}
-static inline void audit_free(struct task_struct *task)
-{
-	if (unlikely(task->audit_context))
-		__audit_free(task);
-}
-static inline void audit_syscall_entry(int arch, int major, unsigned long a0,
-				       unsigned long a1, unsigned long a2,
-				       unsigned long a3)
-{
-	if (unlikely(!audit_dummy_context()))
-		__audit_syscall_entry(arch, major, a0, a1, a2, a3);
-}
-static inline void audit_syscall_exit(void *pt_regs)
-{
-	if (unlikely(current->audit_context)) {
-		int success = is_syscall_success(pt_regs);
-		int return_code = regs_return_value(pt_regs);
-
-		__audit_syscall_exit(success, return_code);
-	}
-}
-static inline void audit_getname(const char *name)
-{
-	if (unlikely(!audit_dummy_context()))
-		__audit_getname(name);
-}
-static inline void audit_inode(const char *name, const struct dentry *dentry) {
-	if (unlikely(!audit_dummy_context()))
-		__audit_inode(name, dentry);
-}
-static inline void audit_inode_child(const struct dentry *dentry,
-				     const struct inode *parent) {
-	if (unlikely(!audit_dummy_context()))
-		__audit_inode_child(dentry, parent);
-}
-void audit_core_dumps(long signr);
-
-static inline void audit_seccomp(unsigned long syscall)
-{
-	if (unlikely(!audit_dummy_context()))
-		__audit_seccomp(syscall);
-}
-
-static inline void audit_ptrace(struct task_struct *t)
-{
-	if (unlikely(!audit_dummy_context()))
-		__audit_ptrace(t);
-}
-
-				/* Private API (for audit.c only) */
-extern unsigned int audit_serial(void);
-extern int auditsc_get_stamp(struct audit_context *ctx,
-			      struct timespec *t, unsigned int *serial);
-extern int  audit_set_loginuid(uid_t loginuid);
-#define audit_get_loginuid(t) ((t)->loginuid)
-#define audit_get_sessionid(t) ((t)->sessionid)
-extern void audit_log_task_context(struct audit_buffer *ab);
-extern void __audit_ipc_obj(struct kern_ipc_perm *ipcp);
-extern void __audit_ipc_set_perm(unsigned long qbytes, uid_t uid, gid_t gid, umode_t mode);
-extern int __audit_bprm(struct linux_binprm *bprm);
-extern void __audit_socketcall(int nargs, unsigned long *args);
-extern int __audit_sockaddr(int len, void *addr);
-extern void __audit_fd_pair(int fd1, int fd2);
-extern void __audit_mq_open(int oflag, umode_t mode, struct mq_attr *attr);
-extern void __audit_mq_sendrecv(mqd_t mqdes, size_t msg_len, unsigned int msg_prio, const struct timespec *abs_timeout);
-extern void __audit_mq_notify(mqd_t mqdes, const struct sigevent *notification);
-extern void __audit_mq_getsetattr(mqd_t mqdes, struct mq_attr *mqstat);
-extern int __audit_log_bprm_fcaps(struct linux_binprm *bprm,
-				  const struct cred *new,
-				  const struct cred *old);
-extern void __audit_log_capset(pid_t pid, const struct cred *new, const struct cred *old);
-extern void __audit_mmap_fd(int fd, int flags);
-
-static inline void audit_ipc_obj(struct kern_ipc_perm *ipcp)
-{
-	if (unlikely(!audit_dummy_context()))
-		__audit_ipc_obj(ipcp);
-}
-static inline void audit_fd_pair(int fd1, int fd2)
-{
-	if (unlikely(!audit_dummy_context()))
-		__audit_fd_pair(fd1, fd2);
-}
-static inline void audit_ipc_set_perm(unsigned long qbytes, uid_t uid, gid_t gid, umode_t mode)
-{
-	if (unlikely(!audit_dummy_context()))
-		__audit_ipc_set_perm(qbytes, uid, gid, mode);
-}
-static inline int audit_bprm(struct linux_binprm *bprm)
-{
-	if (unlikely(!audit_dummy_context()))
-		return __audit_bprm(bprm);
-	return 0;
-}
-static inline void audit_socketcall(int nargs, unsigned long *args)
-{
-	if (unlikely(!audit_dummy_context()))
-		__audit_socketcall(nargs, args);
-}
-static inline int audit_sockaddr(int len, void *addr)
-{
-	if (unlikely(!audit_dummy_context()))
-		return __audit_sockaddr(len, addr);
-	return 0;
-}
-static inline void audit_mq_open(int oflag, umode_t mode, struct mq_attr *attr)
-{
-	if (unlikely(!audit_dummy_context()))
-		__audit_mq_open(oflag, mode, attr);
-}
-static inline void audit_mq_sendrecv(mqd_t mqdes, size_t msg_len, unsigned int msg_prio, const struct timespec *abs_timeout)
-{
-	if (unlikely(!audit_dummy_context()))
-		__audit_mq_sendrecv(mqdes, msg_len, msg_prio, abs_timeout);
-}
-static inline void audit_mq_notify(mqd_t mqdes, const struct sigevent *notification)
-{
-	if (unlikely(!audit_dummy_context()))
-		__audit_mq_notify(mqdes, notification);
-}
-static inline void audit_mq_getsetattr(mqd_t mqdes, struct mq_attr *mqstat)
-{
-	if (unlikely(!audit_dummy_context()))
-		__audit_mq_getsetattr(mqdes, mqstat);
-}
-
-static inline int audit_log_bprm_fcaps(struct linux_binprm *bprm,
-				       const struct cred *new,
-				       const struct cred *old)
-{
-	if (unlikely(!audit_dummy_context()))
-		return __audit_log_bprm_fcaps(bprm, new, old);
-	return 0;
-}
-
-static inline void audit_log_capset(pid_t pid, const struct cred *new,
-				   const struct cred *old)
-{
-	if (unlikely(!audit_dummy_context()))
-		__audit_log_capset(pid, new, old);
-}
-
-static inline void audit_mmap_fd(int fd, int flags)
-{
-	if (unlikely(!audit_dummy_context()))
-		__audit_mmap_fd(fd, flags);
-}
-
-extern int audit_n_rules;
-extern int audit_signals;
-#else /* CONFIG_AUDITSYSCALL */
-#define audit_alloc(t) ({ 0; })
-#define audit_free(t) do { ; } while (0)
-#define audit_syscall_entry(ta,a,b,c,d,e) do { ; } while (0)
-#define audit_syscall_exit(r) do { ; } while (0)
-#define audit_dummy_context() 1
-#define audit_getname(n) do { ; } while (0)
-#define audit_putname(n) do { ; } while (0)
-#define __audit_inode(n,d) do { ; } while (0)
-#define __audit_inode_child(i,p) do { ; } while (0)
-#define audit_inode(n,d) do { (void)(d); } while (0)
-#define audit_inode_child(i,p) do { ; } while (0)
-#define audit_core_dumps(i) do { ; } while (0)
-#define audit_seccomp(i) do { ; } while (0)
-#define auditsc_get_stamp(c,t,s) (0)
-#define audit_get_loginuid(t) (-1)
-#define audit_get_sessionid(t) (-1)
-#define audit_log_task_context(b) do { ; } while (0)
-#define audit_ipc_obj(i) ((void)0)
-#define audit_ipc_set_perm(q,u,g,m) ((void)0)
-#define audit_bprm(p) ({ 0; })
-#define audit_socketcall(n,a) ((void)0)
-#define audit_fd_pair(n,a) ((void)0)
-#define audit_sockaddr(len, addr) ({ 0; })
-#define audit_mq_open(o,m,a) ((void)0)
-#define audit_mq_sendrecv(d,l,p,t) ((void)0)
-#define audit_mq_notify(d,n) ((void)0)
-#define audit_mq_getsetattr(d,s) ((void)0)
-#define audit_log_bprm_fcaps(b, ncr, ocr) ({ 0; })
-#define audit_log_capset(pid, ncr, ocr) ((void)0)
-#define audit_mmap_fd(fd, flags) ((void)0)
-#define audit_ptrace(t) ((void)0)
-#define audit_n_rules 0
-#define audit_signals 0
-#endif /* CONFIG_AUDITSYSCALL */
-
-#ifdef CONFIG_AUDIT
-/* These are defined in audit.c */
-				/* Public API */
-extern __printf(4, 5)
-void audit_log(struct audit_context *ctx, gfp_t gfp_mask, int type,
-	       const char *fmt, ...);
-
-extern struct audit_buffer *audit_log_start(struct audit_context *ctx, gfp_t gfp_mask, int type);
-extern __printf(2, 3)
-void audit_log_format(struct audit_buffer *ab, const char *fmt, ...);
-extern void		    audit_log_end(struct audit_buffer *ab);
-extern int		    audit_string_contains_control(const char *string,
-							  size_t len);
-extern void		    audit_log_n_hex(struct audit_buffer *ab,
-					  const unsigned char *buf,
-					  size_t len);
-extern void		    audit_log_n_string(struct audit_buffer *ab,
-					       const char *buf,
-					       size_t n);
-#define audit_log_string(a,b) audit_log_n_string(a, b, strlen(b));
-extern void		    audit_log_n_untrustedstring(struct audit_buffer *ab,
-							const char *string,
-							size_t n);
-extern void		    audit_log_untrustedstring(struct audit_buffer *ab,
-						      const char *string);
-extern void		    audit_log_d_path(struct audit_buffer *ab,
-					     const char *prefix,
-					     const struct path *path);
-extern void		    audit_log_key(struct audit_buffer *ab,
-					  char *key);
-extern void		    audit_log_lost(const char *message);
-#ifdef CONFIG_SECURITY
-extern void 		    audit_log_secctx(struct audit_buffer *ab, u32 secid);
-#else
-#define audit_log_secctx(b,s) do { ; } while (0)
-#endif
-
-extern int		    audit_update_lsm_rules(void);
-
-				/* Private API (for audit.c only) */
-extern int audit_filter_user(struct netlink_skb_parms *cb);
-extern int audit_filter_type(int type);
-extern int  audit_receive_filter(int type, int pid, int uid, int seq,
-				void *data, size_t datasz, uid_t loginuid,
-				u32 sessionid, u32 sid);
-extern int audit_enabled;
-#else
-#define audit_log(c,g,t,f,...) do { ; } while (0)
-#define audit_log_start(c,g,t) ({ NULL; })
-#define audit_log_vformat(b,f,a) do { ; } while (0)
-#define audit_log_format(b,f,...) do { ; } while (0)
-#define audit_log_end(b) do { ; } while (0)
-#define audit_log_n_hex(a,b,l) do { ; } while (0)
-#define audit_log_n_string(a,c,l) do { ; } while (0)
-#define audit_log_string(a,c) do { ; } while (0)
-#define audit_log_n_untrustedstring(a,n,s) do { ; } while (0)
-#define audit_log_untrustedstring(a,s) do { ; } while (0)
-#define audit_log_d_path(b, p, d) do { ; } while (0)
-#define audit_log_key(b, k) do { ; } while (0)
-#define audit_log_secctx(b,s) do { ; } while (0)
-#define audit_enabled 0
-#endif
-#endif
-#endif
diff --git a/ANDROID_3.4.5/include/linux/auto_dev-ioctl.h b/ANDROID_3.4.5/include/linux/auto_dev-ioctl.h
deleted file mode 100644
index 850f39b3..00000000
--- a/ANDROID_3.4.5/include/linux/auto_dev-ioctl.h
+++ /dev/null
@@ -1,229 +0,0 @@
-/*
- * Copyright 2008 Red Hat, Inc. All rights reserved.
- * Copyright 2008 Ian Kent <raven@themaw.net>
- *
- * This file is part of the Linux kernel and is made available under
- * the terms of the GNU General Public License, version 2, or at your
- * option, any later version, incorporated herein by reference.
- */
-
-#ifndef _LINUX_AUTO_DEV_IOCTL_H
-#define _LINUX_AUTO_DEV_IOCTL_H
-
-#include <linux/auto_fs.h>
-
-#ifdef __KERNEL__
-#include <linux/string.h>
-#else
-#include <string.h>
-#endif /* __KERNEL__ */
-
-#define AUTOFS_DEVICE_NAME		"autofs"
-
-#define AUTOFS_DEV_IOCTL_VERSION_MAJOR	1
-#define AUTOFS_DEV_IOCTL_VERSION_MINOR	0
-
-#define AUTOFS_DEVID_LEN		16
-
-#define AUTOFS_DEV_IOCTL_SIZE		sizeof(struct autofs_dev_ioctl)
-
-/*
- * An ioctl interface for autofs mount point control.
- */
-
-struct args_protover {
-	__u32	version;
-};
-
-struct args_protosubver {
-	__u32	sub_version;
-};
-
-struct args_openmount {
-	__u32	devid;
-};
-
-struct args_ready {
-	__u32	token;
-};
-
-struct args_fail {
-	__u32	token;
-	__s32	status;
-};
-
-struct args_setpipefd {
-	__s32	pipefd;
-};
-
-struct args_timeout {
-	__u64	timeout;
-};
-
-struct args_requester {
-	__u32	uid;
-	__u32	gid;
-};
-
-struct args_expire {
-	__u32	how;
-};
-
-struct args_askumount {
-	__u32	may_umount;
-};
-
-struct args_ismountpoint {
-	union {
-		struct args_in {
-			__u32	type;
-		} in;
-		struct args_out {
-			__u32	devid;
-			__u32	magic;
-		} out;
-	};
-};
-
-/*
- * All the ioctls use this structure.
- * When sending a path size must account for the total length
- * of the chunk of memory otherwise is is the size of the
- * structure.
- */
-
-struct autofs_dev_ioctl {
-	__u32 ver_major;
-	__u32 ver_minor;
-	__u32 size;		/* total size of data passed in
-				 * including this struct */
-	__s32 ioctlfd;		/* automount command fd */
-
-	/* Command parameters */
-
-	union {
-		struct args_protover		protover;
-		struct args_protosubver		protosubver;
-		struct args_openmount		openmount;
-		struct args_ready		ready;
-		struct args_fail		fail;
-		struct args_setpipefd		setpipefd;
-		struct args_timeout		timeout;
-		struct args_requester		requester;
-		struct args_expire		expire;
-		struct args_askumount		askumount;
-		struct args_ismountpoint	ismountpoint;
-	};
-
-	char path[0];
-};
-
-static inline void init_autofs_dev_ioctl(struct autofs_dev_ioctl *in)
-{
-	memset(in, 0, sizeof(struct autofs_dev_ioctl));
-	in->ver_major = AUTOFS_DEV_IOCTL_VERSION_MAJOR;
-	in->ver_minor = AUTOFS_DEV_IOCTL_VERSION_MINOR;
-	in->size = sizeof(struct autofs_dev_ioctl);
-	in->ioctlfd = -1;
-	return;
-}
-
-/*
- * If you change this make sure you make the corresponding change
- * to autofs-dev-ioctl.c:lookup_ioctl()
- */
-enum {
-	/* Get various version info */
-	AUTOFS_DEV_IOCTL_VERSION_CMD = 0x71,
-	AUTOFS_DEV_IOCTL_PROTOVER_CMD,
-	AUTOFS_DEV_IOCTL_PROTOSUBVER_CMD,
-
-	/* Open mount ioctl fd */
-	AUTOFS_DEV_IOCTL_OPENMOUNT_CMD,
-
-	/* Close mount ioctl fd */
-	AUTOFS_DEV_IOCTL_CLOSEMOUNT_CMD,
-
-	/* Mount/expire status returns */
-	AUTOFS_DEV_IOCTL_READY_CMD,
-	AUTOFS_DEV_IOCTL_FAIL_CMD,
-
-	/* Activate/deactivate autofs mount */
-	AUTOFS_DEV_IOCTL_SETPIPEFD_CMD,
-	AUTOFS_DEV_IOCTL_CATATONIC_CMD,
-
-	/* Expiry timeout */
-	AUTOFS_DEV_IOCTL_TIMEOUT_CMD,
-
-	/* Get mount last requesting uid and gid */
-	AUTOFS_DEV_IOCTL_REQUESTER_CMD,
-
-	/* Check for eligible expire candidates */
-	AUTOFS_DEV_IOCTL_EXPIRE_CMD,
-
-	/* Request busy status */
-	AUTOFS_DEV_IOCTL_ASKUMOUNT_CMD,
-
-	/* Check if path is a mountpoint */
-	AUTOFS_DEV_IOCTL_ISMOUNTPOINT_CMD,
-};
-
-#define AUTOFS_IOCTL 0x93
-
-#define AUTOFS_DEV_IOCTL_VERSION \
-	_IOWR(AUTOFS_IOCTL, \
-	      AUTOFS_DEV_IOCTL_VERSION_CMD, struct autofs_dev_ioctl)
-
-#define AUTOFS_DEV_IOCTL_PROTOVER \
-	_IOWR(AUTOFS_IOCTL, \
-	      AUTOFS_DEV_IOCTL_PROTOVER_CMD, struct autofs_dev_ioctl)
-
-#define AUTOFS_DEV_IOCTL_PROTOSUBVER \
-	_IOWR(AUTOFS_IOCTL, \
-	      AUTOFS_DEV_IOCTL_PROTOSUBVER_CMD, struct autofs_dev_ioctl)
-
-#define AUTOFS_DEV_IOCTL_OPENMOUNT \
-	_IOWR(AUTOFS_IOCTL, \
-	      AUTOFS_DEV_IOCTL_OPENMOUNT_CMD, struct autofs_dev_ioctl)
-
-#define AUTOFS_DEV_IOCTL_CLOSEMOUNT \
-	_IOWR(AUTOFS_IOCTL, \
-	      AUTOFS_DEV_IOCTL_CLOSEMOUNT_CMD, struct autofs_dev_ioctl)
-
-#define AUTOFS_DEV_IOCTL_READY \
-	_IOWR(AUTOFS_IOCTL, \
-	      AUTOFS_DEV_IOCTL_READY_CMD, struct autofs_dev_ioctl)
-
-#define AUTOFS_DEV_IOCTL_FAIL \
-	_IOWR(AUTOFS_IOCTL, \
-	      AUTOFS_DEV_IOCTL_FAIL_CMD, struct autofs_dev_ioctl)
-
-#define AUTOFS_DEV_IOCTL_SETPIPEFD \
-	_IOWR(AUTOFS_IOCTL, \
-	      AUTOFS_DEV_IOCTL_SETPIPEFD_CMD, struct autofs_dev_ioctl)
-
-#define AUTOFS_DEV_IOCTL_CATATONIC \
-	_IOWR(AUTOFS_IOCTL, \
-	      AUTOFS_DEV_IOCTL_CATATONIC_CMD, struct autofs_dev_ioctl)
-
-#define AUTOFS_DEV_IOCTL_TIMEOUT \
-	_IOWR(AUTOFS_IOCTL, \
-	      AUTOFS_DEV_IOCTL_TIMEOUT_CMD, struct autofs_dev_ioctl)
-
-#define AUTOFS_DEV_IOCTL_REQUESTER \
-	_IOWR(AUTOFS_IOCTL, \
-	      AUTOFS_DEV_IOCTL_REQUESTER_CMD, struct autofs_dev_ioctl)
-
-#define AUTOFS_DEV_IOCTL_EXPIRE \
-	_IOWR(AUTOFS_IOCTL, \
-	      AUTOFS_DEV_IOCTL_EXPIRE_CMD, struct autofs_dev_ioctl)
-
-#define AUTOFS_DEV_IOCTL_ASKUMOUNT \
-	_IOWR(AUTOFS_IOCTL, \
-	      AUTOFS_DEV_IOCTL_ASKUMOUNT_CMD, struct autofs_dev_ioctl)
-
-#define AUTOFS_DEV_IOCTL_ISMOUNTPOINT \
-	_IOWR(AUTOFS_IOCTL, \
-	      AUTOFS_DEV_IOCTL_ISMOUNTPOINT_CMD, struct autofs_dev_ioctl)
-
-#endif	/* _LINUX_AUTO_DEV_IOCTL_H */
diff --git a/ANDROID_3.4.5/include/linux/auto_fs.h b/ANDROID_3.4.5/include/linux/auto_fs.h
deleted file mode 100644
index da64e150..00000000
--- a/ANDROID_3.4.5/include/linux/auto_fs.h
+++ /dev/null
@@ -1,86 +0,0 @@
-/* -*- linux-c -*- ------------------------------------------------------- *
- *   
- * linux/include/linux/auto_fs.h
- *
- *   Copyright 1997 Transmeta Corporation - All Rights Reserved
- *
- * This file is part of the Linux kernel and is made available under
- * the terms of the GNU General Public License, version 2, or at your
- * option, any later version, incorporated herein by reference.
- *
- * ----------------------------------------------------------------------- */
-
-
-#ifndef _LINUX_AUTO_FS_H
-#define _LINUX_AUTO_FS_H
-
-#include <linux/types.h>
-#ifdef __KERNEL__
-#include <linux/fs.h>
-#include <linux/limits.h>
-#include <linux/ioctl.h>
-#else
-#include <sys/ioctl.h>
-#endif /* __KERNEL__ */
-
-/* This file describes autofs v3 */
-#define AUTOFS_PROTO_VERSION	3
-
-/* Range of protocol versions defined */
-#define AUTOFS_MAX_PROTO_VERSION	AUTOFS_PROTO_VERSION
-#define AUTOFS_MIN_PROTO_VERSION	AUTOFS_PROTO_VERSION
-
-/*
- * Architectures where both 32- and 64-bit binaries can be executed
- * on 64-bit kernels need this.  This keeps the structure format
- * uniform, and makes sure the wait_queue_token isn't too big to be
- * passed back down to the kernel.
- *
- * This assumes that on these architectures:
- * mode     32 bit    64 bit
- * -------------------------
- * int      32 bit    32 bit
- * long     32 bit    64 bit
- *
- * If so, 32-bit user-space code should be backwards compatible.
- */
-
-#if defined(__sparc__) || defined(__mips__) || defined(__x86_64__) \
- || defined(__powerpc__) || defined(__s390__)
-typedef unsigned int autofs_wqt_t;
-#else
-typedef unsigned long autofs_wqt_t;
-#endif
-
-/* Packet types */
-#define autofs_ptype_missing	0	/* Missing entry (mount request) */
-#define autofs_ptype_expire	1	/* Expire entry (umount request) */
-
-struct autofs_packet_hdr {
-	int proto_version;		/* Protocol version */
-	int type;			/* Type of packet */
-};
-
-struct autofs_packet_missing {
-	struct autofs_packet_hdr hdr;
-        autofs_wqt_t wait_queue_token;
-	int len;
-	char name[NAME_MAX+1];
-};	
-
-/* v3 expire (via ioctl) */
-struct autofs_packet_expire {
-	struct autofs_packet_hdr hdr;
-	int len;
-	char name[NAME_MAX+1];
-};
-
-#define AUTOFS_IOC_READY      _IO(0x93,0x60)
-#define AUTOFS_IOC_FAIL       _IO(0x93,0x61)
-#define AUTOFS_IOC_CATATONIC  _IO(0x93,0x62)
-#define AUTOFS_IOC_PROTOVER   _IOR(0x93,0x63,int)
-#define AUTOFS_IOC_SETTIMEOUT32 _IOWR(0x93,0x64,compat_ulong_t)
-#define AUTOFS_IOC_SETTIMEOUT _IOWR(0x93,0x64,unsigned long)
-#define AUTOFS_IOC_EXPIRE     _IOR(0x93,0x65,struct autofs_packet_expire)
-
-#endif /* _LINUX_AUTO_FS_H */
diff --git a/ANDROID_3.4.5/include/linux/auto_fs4.h b/ANDROID_3.4.5/include/linux/auto_fs4.h
deleted file mode 100644
index e02982fa..00000000
--- a/ANDROID_3.4.5/include/linux/auto_fs4.h
+++ /dev/null
@@ -1,164 +0,0 @@
-/* -*- c -*-
- * linux/include/linux/auto_fs4.h
- *
- * Copyright 1999-2000 Jeremy Fitzhardinge <jeremy@goop.org>
- *
- * This file is part of the Linux kernel and is made available under
- * the terms of the GNU General Public License, version 2, or at your
- * option, any later version, incorporated herein by reference.
- */
-
-#ifndef _LINUX_AUTO_FS4_H
-#define _LINUX_AUTO_FS4_H
-
-/* Include common v3 definitions */
-#include <linux/types.h>
-#include <linux/auto_fs.h>
-
-/* autofs v4 definitions */
-#undef AUTOFS_PROTO_VERSION
-#undef AUTOFS_MIN_PROTO_VERSION
-#undef AUTOFS_MAX_PROTO_VERSION
-
-#define AUTOFS_PROTO_VERSION		5
-#define AUTOFS_MIN_PROTO_VERSION	3
-#define AUTOFS_MAX_PROTO_VERSION	5
-
-#define AUTOFS_PROTO_SUBVERSION		2
-
-/* Mask for expire behaviour */
-#define AUTOFS_EXP_IMMEDIATE		1
-#define AUTOFS_EXP_LEAVES		2
-
-#define AUTOFS_TYPE_ANY			0U
-#define AUTOFS_TYPE_INDIRECT		1U
-#define AUTOFS_TYPE_DIRECT		2U
-#define AUTOFS_TYPE_OFFSET		4U
-
-static inline void set_autofs_type_indirect(unsigned int *type)
-{
-	*type = AUTOFS_TYPE_INDIRECT;
-	return;
-}
-
-static inline unsigned int autofs_type_indirect(unsigned int type)
-{
-	return (type == AUTOFS_TYPE_INDIRECT);
-}
-
-static inline void set_autofs_type_direct(unsigned int *type)
-{
-	*type = AUTOFS_TYPE_DIRECT;
-	return;
-}
-
-static inline unsigned int autofs_type_direct(unsigned int type)
-{
-	return (type == AUTOFS_TYPE_DIRECT);
-}
-
-static inline void set_autofs_type_offset(unsigned int *type)
-{
-	*type = AUTOFS_TYPE_OFFSET;
-	return;
-}
-
-static inline unsigned int autofs_type_offset(unsigned int type)
-{
-	return (type == AUTOFS_TYPE_OFFSET);
-}
-
-static inline unsigned int autofs_type_trigger(unsigned int type)
-{
-	return (type == AUTOFS_TYPE_DIRECT || type == AUTOFS_TYPE_OFFSET);
-}
-
-/*
- * This isn't really a type as we use it to say "no type set" to
- * indicate we want to search for "any" mount in the
- * autofs_dev_ioctl_ismountpoint() device ioctl function.
- */
-static inline void set_autofs_type_any(unsigned int *type)
-{
-	*type = AUTOFS_TYPE_ANY;
-	return;
-}
-
-static inline unsigned int autofs_type_any(unsigned int type)
-{
-	return (type == AUTOFS_TYPE_ANY);
-}
-
-/* Daemon notification packet types */
-enum autofs_notify {
-	NFY_NONE,
-	NFY_MOUNT,
-	NFY_EXPIRE
-};
-
-/* Kernel protocol version 4 packet types */
-
-/* Expire entry (umount request) */
-#define autofs_ptype_expire_multi	2
-
-/* Kernel protocol version 5 packet types */
-
-/* Indirect mount missing and expire requests. */
-#define autofs_ptype_missing_indirect	3
-#define autofs_ptype_expire_indirect	4
-
-/* Direct mount missing and expire requests */
-#define autofs_ptype_missing_direct	5
-#define autofs_ptype_expire_direct	6
-
-/* v4 multi expire (via pipe) */
-struct autofs_packet_expire_multi {
-	struct autofs_packet_hdr hdr;
-        autofs_wqt_t wait_queue_token;
-	int len;
-	char name[NAME_MAX+1];
-};
-
-union autofs_packet_union {
-	struct autofs_packet_hdr hdr;
-	struct autofs_packet_missing missing;
-	struct autofs_packet_expire expire;
-	struct autofs_packet_expire_multi expire_multi;
-};
-
-/* autofs v5 common packet struct */
-struct autofs_v5_packet {
-	struct autofs_packet_hdr hdr;
-	autofs_wqt_t wait_queue_token;
-	__u32 dev;
-	__u64 ino;
-	__u32 uid;
-	__u32 gid;
-	__u32 pid;
-	__u32 tgid;
-	__u32 len;
-	char name[NAME_MAX+1];
-};
-
-typedef struct autofs_v5_packet autofs_packet_missing_indirect_t;
-typedef struct autofs_v5_packet autofs_packet_expire_indirect_t;
-typedef struct autofs_v5_packet autofs_packet_missing_direct_t;
-typedef struct autofs_v5_packet autofs_packet_expire_direct_t;
-
-union autofs_v5_packet_union {
-	struct autofs_packet_hdr hdr;
-	struct autofs_v5_packet v5_packet;
-	autofs_packet_missing_indirect_t missing_indirect;
-	autofs_packet_expire_indirect_t expire_indirect;
-	autofs_packet_missing_direct_t missing_direct;
-	autofs_packet_expire_direct_t expire_direct;
-};
-
-#define AUTOFS_IOC_EXPIRE_MULTI		_IOW(0x93,0x66,int)
-#define AUTOFS_IOC_EXPIRE_INDIRECT	AUTOFS_IOC_EXPIRE_MULTI
-#define AUTOFS_IOC_EXPIRE_DIRECT	AUTOFS_IOC_EXPIRE_MULTI
-#define AUTOFS_IOC_PROTOSUBVER		_IOR(0x93,0x67,int)
-#define AUTOFS_IOC_ASKUMOUNT		_IOR(0x93,0x70,int)
-
-
-#endif /* _LINUX_AUTO_FS4_H */
diff --git a/ANDROID_3.4.5/include/linux/auxvec.h b/ANDROID_3.4.5/include/linux/auxvec.h
deleted file mode 100644
index f3b5d4e3..00000000
--- a/ANDROID_3.4.5/include/linux/auxvec.h
+++ /dev/null
@@ -1,39 +0,0 @@
-#ifndef _LINUX_AUXVEC_H
-#define _LINUX_AUXVEC_H
-
-#include <asm/auxvec.h>
-
-/* Symbolic values for the entries in the auxiliary table
-   put on the initial stack */
-#define AT_NULL   0	/* end of vector */
-#define AT_IGNORE 1	/* entry should be ignored */
-#define AT_EXECFD 2	/* file descriptor of program */
-#define AT_PHDR   3	/* program headers for program */
-#define AT_PHENT  4	/* size of program header entry */
-#define AT_PHNUM  5	/* number of program headers */
-#define AT_PAGESZ 6	/* system page size */
-#define AT_BASE   7	/* base address of interpreter */
-#define AT_FLAGS  8	/* flags */
-#define AT_ENTRY  9	/* entry point of program */
-#define AT_NOTELF 10	/* program is not ELF */
-#define AT_UID    11	/* real uid */
-#define AT_EUID   12	/* effective uid */
-#define AT_GID    13	/* real gid */
-#define AT_EGID   14	/* effective gid */
-#define AT_PLATFORM 15  /* string identifying CPU for optimizations */
-#define AT_HWCAP  16    /* arch dependent hints at CPU capabilities */
-#define AT_CLKTCK 17	/* frequency at which times() increments */
-/* AT_* values 18 through 22 are reserved */
-#define AT_SECURE 23   /* secure mode boolean */
-#define AT_BASE_PLATFORM 24	/* string identifying real platform, may
-				 * differ from AT_PLATFORM. */
-#define AT_RANDOM 25	/* address of 16 random bytes */
-
-#define AT_EXECFN  31	/* filename of program */
-
-#ifdef __KERNEL__
-#define AT_VECTOR_SIZE_BASE 19 /* NEW_AUX_ENT entries in auxiliary table */
-  /* number of "#define AT_.*" above, minus {AT_NULL, AT_IGNORE, AT_NOTELF} */
-#endif
-
-#endif /* _LINUX_AUXVEC_H */
diff --git a/ANDROID_3.4.5/include/linux/average.h b/ANDROID_3.4.5/include/linux/average.h
deleted file mode 100644
index c6028fd7..00000000
--- a/ANDROID_3.4.5/include/linux/average.h
+++ /dev/null
@@ -1,30 +0,0 @@
-#ifndef _LINUX_AVERAGE_H
-#define _LINUX_AVERAGE_H
-
-/* Exponentially weighted moving average (EWMA) */
-
-/* For more documentation see lib/average.c */
-
-struct ewma {
-	unsigned long internal;
-	unsigned long factor;
-	unsigned long weight;
-};
-
-extern void ewma_init(struct ewma *avg, unsigned long factor,
-		      unsigned long weight);
-
-extern struct ewma *ewma_add(struct ewma *avg, unsigned long val);
-
-/**
- * ewma_read() - Get average value
- * @avg: Average structure
- *
- * Returns the average value held in @avg.
- */
-static inline unsigned long ewma_read(const struct ewma *avg)
-{
-	return avg->internal >> avg->factor;
-}
-
-#endif /* _LINUX_AVERAGE_H */
diff --git a/ANDROID_3.4.5/include/linux/ax25.h b/ANDROID_3.4.5/include/linux/ax25.h
deleted file mode 100644
index 74c89a41..00000000
--- a/ANDROID_3.4.5/include/linux/ax25.h
+++ /dev/null
@@ -1,116 +0,0 @@
-/*
- * These are the public elements of the Linux kernel AX.25 code. A similar
- * file netrom.h exists for the NET/ROM protocol.
- */
-
-#ifndef	AX25_KERNEL_H
-#define	AX25_KERNEL_H
-
-#include <linux/socket.h>
-
-#define AX25_MTU	256
-#define AX25_MAX_DIGIS  8
-
-#define AX25_WINDOW	1
-#define AX25_T1		2
-#define AX25_N2		3
-#define AX25_T3		4
-#define AX25_T2		5
-#define	AX25_BACKOFF	6
-#define	AX25_EXTSEQ	7
-#define	AX25_PIDINCL	8
-#define AX25_IDLE	9
-#define AX25_PACLEN	10
-#define AX25_IAMDIGI	12
-
-#define AX25_KILL	99
-
-#define SIOCAX25GETUID		(SIOCPROTOPRIVATE+0)
-#define SIOCAX25ADDUID		(SIOCPROTOPRIVATE+1)
-#define SIOCAX25DELUID		(SIOCPROTOPRIVATE+2)
-#define SIOCAX25NOUID		(SIOCPROTOPRIVATE+3)
-#define SIOCAX25OPTRT		(SIOCPROTOPRIVATE+7)
-#define SIOCAX25CTLCON		(SIOCPROTOPRIVATE+8)
-#define SIOCAX25GETINFOOLD	(SIOCPROTOPRIVATE+9)
-#define SIOCAX25ADDFWD		(SIOCPROTOPRIVATE+10)
-#define SIOCAX25DELFWD		(SIOCPROTOPRIVATE+11)
-#define SIOCAX25DEVCTL          (SIOCPROTOPRIVATE+12)
-#define SIOCAX25GETINFO         (SIOCPROTOPRIVATE+13)
-
-#define AX25_SET_RT_IPMODE	2
-
-#define AX25_NOUID_DEFAULT	0
-#define AX25_NOUID_BLOCK	1
-
-typedef struct {
-	char		ax25_call[7];	/* 6 call + SSID (shifted ascii!) */
-} ax25_address;
-
-struct sockaddr_ax25 {
-	__kernel_sa_family_t sax25_family;
-	ax25_address	sax25_call;
-	int		sax25_ndigis;
-	/* Digipeater ax25_address sets follow */
-};
-
-#define sax25_uid	sax25_ndigis
-
-struct full_sockaddr_ax25 {
-	struct sockaddr_ax25 fsa_ax25;
-	ax25_address	fsa_digipeater[AX25_MAX_DIGIS];
-};
-
-struct ax25_routes_struct {
-	ax25_address	port_addr;
-	ax25_address	dest_addr;
-	unsigned char	digi_count;
-	ax25_address	digi_addr[AX25_MAX_DIGIS];
-};
-
-struct ax25_route_opt_struct {
-	ax25_address	port_addr;
-	ax25_address	dest_addr;
-	int		cmd;
-	int		arg;
-};
-
-struct ax25_ctl_struct {
-        ax25_address            port_addr;
-        ax25_address            source_addr;
-        ax25_address            dest_addr;
-        unsigned int            cmd;
-        unsigned long           arg;
-        unsigned char           digi_count;
-        ax25_address            digi_addr[AX25_MAX_DIGIS];
-};
-
-/* this will go away. Please do not export to user land */
-struct ax25_info_struct_deprecated {
-	unsigned int	n2, n2count;
-	unsigned int	t1, t1timer;
-	unsigned int	t2, t2timer;
-	unsigned int	t3, t3timer;
-	unsigned int	idle, idletimer;
-	unsigned int	state;
-	unsigned int	rcv_q, snd_q;
-};
-
-struct ax25_info_struct {
-	unsigned int	n2, n2count;
-	unsigned int	t1, t1timer;
-	unsigned int	t2, t2timer;
-	unsigned int	t3, t3timer;
-	unsigned int	idle, idletimer;
-	unsigned int	state;
-	unsigned int	rcv_q, snd_q;
-	unsigned int	vs, vr, va, vs_max;
-	unsigned int	paclen;
-	unsigned int	window;
-};
-
-struct ax25_fwd_struct {
-	ax25_address	port_from;
-	ax25_address	port_to;
-};
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/b1lli.h b/ANDROID_3.4.5/include/linux/b1lli.h
deleted file mode 100644
index 713f7126..00000000
--- a/ANDROID_3.4.5/include/linux/b1lli.h
+++ /dev/null
@@ -1,73 +0,0 @@
-/* $Id: b1lli.h,v 1.8.8.3 2001/09/23 22:25:05 kai Exp $
- *
- * ISDN lowlevel-module for AVM B1-card.
- *
- * Copyright 1996 by Carsten Paeth (calle@calle.in-berlin.de)
- *
- * This software may be used and distributed according to the terms
- * of the GNU General Public License, incorporated herein by reference.
- *
- */
-
-#ifndef _B1LLI_H_
-#define _B1LLI_H_
-/*
- * struct for loading t4 file 
- */
-typedef struct avmb1_t4file {
-	int len;
-	unsigned char *data;
-} avmb1_t4file;
-
-typedef struct avmb1_loaddef {
-	int contr;
-	avmb1_t4file t4file;
-} avmb1_loaddef;
-
-typedef struct avmb1_loadandconfigdef {
-	int contr;
-	avmb1_t4file t4file;
-        avmb1_t4file t4config; 
-} avmb1_loadandconfigdef;
-
-typedef struct avmb1_resetdef {
-	int contr;
-} avmb1_resetdef;
-
-typedef struct avmb1_getdef {
-	int contr;
-	int cardtype;
-	int cardstate;
-} avmb1_getdef;
-
-/*
- * struct for adding new cards 
- */
-typedef struct avmb1_carddef {
-	int port;
-	int irq;
-} avmb1_carddef;
-
-#define AVM_CARDTYPE_B1		0
-#define AVM_CARDTYPE_T1		1
-#define AVM_CARDTYPE_M1		2
-#define AVM_CARDTYPE_M2		3
-
-typedef struct avmb1_extcarddef {
-	int port;
-	int irq;
-        int cardtype;
-        int cardnr;  /* for HEMA/T1 */
-} avmb1_extcarddef;
-
-#define	AVMB1_LOAD		0	/* load image to card */
-#define AVMB1_ADDCARD		1	/* add a new card - OBSOLETE */
-#define AVMB1_RESETCARD		2	/* reset a card */
-#define	AVMB1_LOAD_AND_CONFIG	3	/* load image and config to card */
-#define	AVMB1_ADDCARD_WITH_TYPE	4	/* add a new card, with cardtype */
-#define AVMB1_GET_CARDINFO	5	/* get cardtype */
-#define AVMB1_REMOVECARD	6	/* remove a card - OBSOLETE */
-
-#define	AVMB1_REGISTERCARD_IS_OBSOLETE
-
-#endif				/* _B1LLI_H_ */
diff --git a/ANDROID_3.4.5/include/linux/b1pcmcia.h b/ANDROID_3.4.5/include/linux/b1pcmcia.h
deleted file mode 100644
index 12a867c6..00000000
--- a/ANDROID_3.4.5/include/linux/b1pcmcia.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/* $Id: b1pcmcia.h,v 1.1.8.2 2001/09/23 22:25:05 kai Exp $
- *
- * Exported functions of module b1pcmcia to be called by
- * avm_cs card services module.
- *
- * Copyright 1999 by Carsten Paeth (calle@calle.in-berlin.de)
- *
- * This software may be used and distributed according to the terms
- * of the GNU General Public License, incorporated herein by reference.
- *
- */
-
-#ifndef _B1PCMCIA_H_
-#define _B1PCMCIA_H_
-
-int b1pcmcia_addcard_b1(unsigned int port, unsigned irq);
-int b1pcmcia_addcard_m1(unsigned int port, unsigned irq);
-int b1pcmcia_addcard_m2(unsigned int port, unsigned irq);
-int b1pcmcia_delcard(unsigned int port, unsigned irq);
-
-#endif	/* _B1PCMCIA_H_ */
diff --git a/ANDROID_3.4.5/include/linux/backing-dev.h b/ANDROID_3.4.5/include/linux/backing-dev.h
deleted file mode 100644
index b1038bd6..00000000
--- a/ANDROID_3.4.5/include/linux/backing-dev.h
+++ /dev/null
@@ -1,356 +0,0 @@
-/*
- * include/linux/backing-dev.h
- *
- * low-level device information and state which is propagated up through
- * to high-level code.
- */
-
-#ifndef _LINUX_BACKING_DEV_H
-#define _LINUX_BACKING_DEV_H
-
-#include <linux/percpu_counter.h>
-#include <linux/log2.h>
-#include <linux/proportions.h>
-#include <linux/kernel.h>
-#include <linux/fs.h>
-#include <linux/sched.h>
-#include <linux/timer.h>
-#include <linux/writeback.h>
-#include <linux/atomic.h>
-
-struct page;
-struct device;
-struct dentry;
-
-/*
- * Bits in backing_dev_info.state
- */
-enum bdi_state {
-	BDI_pending,		/* On its way to being activated */
-	BDI_wb_alloc,		/* Default embedded wb allocated */
-	BDI_async_congested,	/* The async (write) queue is getting full */
-	BDI_sync_congested,	/* The sync queue is getting full */
-	BDI_registered,		/* bdi_register() was done */
-	BDI_writeback_running,	/* Writeback is in progress */
-	BDI_unused,		/* Available bits start here */
-};
-
-typedef int (congested_fn)(void *, int);
-
-enum bdi_stat_item {
-	BDI_RECLAIMABLE,
-	BDI_WRITEBACK,
-	BDI_DIRTIED,
-	BDI_WRITTEN,
-	NR_BDI_STAT_ITEMS
-};
-
-#define BDI_STAT_BATCH (8*(1+ilog2(nr_cpu_ids)))
-
-struct bdi_writeback {
-	struct backing_dev_info *bdi;	/* our parent bdi */
-	unsigned int nr;
-
-	unsigned long last_old_flush;	/* last old data flush */
-	unsigned long last_active;	/* last time bdi thread was active */
-
-	struct task_struct *task;	/* writeback thread */
-	struct timer_list wakeup_timer; /* used for delayed bdi thread wakeup */
-	struct list_head b_dirty;	/* dirty inodes */
-	struct list_head b_io;		/* parked for writeback */
-	struct list_head b_more_io;	/* parked for more writeback */
-	spinlock_t list_lock;		/* protects the b_* lists */
-};
-
-struct backing_dev_info {
-	struct list_head bdi_list;
-	unsigned long ra_pages;	/* max readahead in PAGE_CACHE_SIZE units */
-	unsigned long state;	/* Always use atomic bitops on this */
-	unsigned int capabilities; /* Device capabilities */
-	congested_fn *congested_fn; /* Function pointer if device is md/dm */
-	void *congested_data;	/* Pointer to aux data for congested func */
-
-	char *name;
-
-	struct percpu_counter bdi_stat[NR_BDI_STAT_ITEMS];
-
-	unsigned long bw_time_stamp;	/* last time write bw is updated */
-	unsigned long dirtied_stamp;
-	unsigned long written_stamp;	/* pages written at bw_time_stamp */
-	unsigned long write_bandwidth;	/* the estimated write bandwidth */
-	unsigned long avg_write_bandwidth; /* further smoothed write bw */
-
-	/*
-	 * The base dirty throttle rate, re-calculated on every 200ms.
-	 * All the bdi tasks' dirty rate will be curbed under it.
-	 * @dirty_ratelimit tracks the estimated @balanced_dirty_ratelimit
-	 * in small steps and is much more smooth/stable than the latter.
-	 */
-	unsigned long dirty_ratelimit;
-	unsigned long balanced_dirty_ratelimit;
-
-	struct prop_local_percpu completions;
-	int dirty_exceeded;
-
-	unsigned int min_ratio;
-	unsigned int max_ratio, max_prop_frac;
-
-	struct bdi_writeback wb;  /* default writeback info for this bdi */
-	spinlock_t wb_lock;	  /* protects work_list */
-
-	struct list_head work_list;
-
-	struct device *dev;
-
-	struct timer_list laptop_mode_wb_timer;
-
-#ifdef CONFIG_DEBUG_FS
-	struct dentry *debug_dir;
-	struct dentry *debug_stats;
-#endif
-};
-
-int bdi_init(struct backing_dev_info *bdi);
-void bdi_destroy(struct backing_dev_info *bdi);
-
-int bdi_register(struct backing_dev_info *bdi, struct device *parent,
-		const char *fmt, ...);
-int bdi_register_dev(struct backing_dev_info *bdi, dev_t dev);
-void bdi_unregister(struct backing_dev_info *bdi);
-int bdi_setup_and_register(struct backing_dev_info *, char *, unsigned int);
-void bdi_start_writeback(struct backing_dev_info *bdi, long nr_pages,
-			enum wb_reason reason);
-void bdi_start_background_writeback(struct backing_dev_info *bdi);
-int bdi_writeback_thread(void *data);
-int bdi_has_dirty_io(struct backing_dev_info *bdi);
-void bdi_arm_supers_timer(void);
-void bdi_wakeup_thread_delayed(struct backing_dev_info *bdi);
-void bdi_lock_two(struct bdi_writeback *wb1, struct bdi_writeback *wb2);
-
-extern spinlock_t bdi_lock;
-extern struct list_head bdi_list;
-extern struct list_head bdi_pending_list;
-
-static inline int wb_has_dirty_io(struct bdi_writeback *wb)
-{
-	return !list_empty(&wb->b_dirty) ||
-	       !list_empty(&wb->b_io) ||
-	       !list_empty(&wb->b_more_io);
-}
-
-static inline void __add_bdi_stat(struct backing_dev_info *bdi,
-		enum bdi_stat_item item, s64 amount)
-{
-	__percpu_counter_add(&bdi->bdi_stat[item], amount, BDI_STAT_BATCH);
-}
-
-static inline void __inc_bdi_stat(struct backing_dev_info *bdi,
-		enum bdi_stat_item item)
-{
-	__add_bdi_stat(bdi, item, 1);
-}
-
-static inline void inc_bdi_stat(struct backing_dev_info *bdi,
-		enum bdi_stat_item item)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-	__inc_bdi_stat(bdi, item);
-	local_irq_restore(flags);
-}
-
-static inline void __dec_bdi_stat(struct backing_dev_info *bdi,
-		enum bdi_stat_item item)
-{
-	__add_bdi_stat(bdi, item, -1);
-}
-
-static inline void dec_bdi_stat(struct backing_dev_info *bdi,
-		enum bdi_stat_item item)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-	__dec_bdi_stat(bdi, item);
-	local_irq_restore(flags);
-}
-
-static inline s64 bdi_stat(struct backing_dev_info *bdi,
-		enum bdi_stat_item item)
-{
-	return percpu_counter_read_positive(&bdi->bdi_stat[item]);
-}
-
-static inline s64 __bdi_stat_sum(struct backing_dev_info *bdi,
-		enum bdi_stat_item item)
-{
-	return percpu_counter_sum_positive(&bdi->bdi_stat[item]);
-}
-
-static inline s64 bdi_stat_sum(struct backing_dev_info *bdi,
-		enum bdi_stat_item item)
-{
-	s64 sum;
-	unsigned long flags;
-
-	local_irq_save(flags);
-	sum = __bdi_stat_sum(bdi, item);
-	local_irq_restore(flags);
-
-	return sum;
-}
-
-extern void bdi_writeout_inc(struct backing_dev_info *bdi);
-
-/*
- * maximal error of a stat counter.
- */
-static inline unsigned long bdi_stat_error(struct backing_dev_info *bdi)
-{
-#ifdef CONFIG_SMP
-	return nr_cpu_ids * BDI_STAT_BATCH;
-#else
-	return 1;
-#endif
-}
-
-int bdi_set_min_ratio(struct backing_dev_info *bdi, unsigned int min_ratio);
-int bdi_set_max_ratio(struct backing_dev_info *bdi, unsigned int max_ratio);
-
-/*
- * Flags in backing_dev_info::capability
- *
- * The first three flags control whether dirty pages will contribute to the
- * VM's accounting and whether writepages() should be called for dirty pages
- * (something that would not, for example, be appropriate for ramfs)
- *
- * WARNING: these flags are closely related and should not normally be
- * used separately.  The BDI_CAP_NO_ACCT_AND_WRITEBACK combines these
- * three flags into a single convenience macro.
- *
- * BDI_CAP_NO_ACCT_DIRTY:  Dirty pages shouldn't contribute to accounting
- * BDI_CAP_NO_WRITEBACK:   Don't write pages back
- * BDI_CAP_NO_ACCT_WB:     Don't automatically account writeback pages
- *
- * These flags let !MMU mmap() govern direct device mapping vs immediate
- * copying more easily for MAP_PRIVATE, especially for ROM filesystems.
- *
- * BDI_CAP_MAP_COPY:       Copy can be mapped (MAP_PRIVATE)
- * BDI_CAP_MAP_DIRECT:     Can be mapped directly (MAP_SHARED)
- * BDI_CAP_READ_MAP:       Can be mapped for reading
- * BDI_CAP_WRITE_MAP:      Can be mapped for writing
- * BDI_CAP_EXEC_MAP:       Can be mapped for execution
- *
- * BDI_CAP_SWAP_BACKED:    Count shmem/tmpfs objects as swap-backed.
- */
-#define BDI_CAP_NO_ACCT_DIRTY	0x00000001
-#define BDI_CAP_NO_WRITEBACK	0x00000002
-#define BDI_CAP_MAP_COPY	0x00000004
-#define BDI_CAP_MAP_DIRECT	0x00000008
-#define BDI_CAP_READ_MAP	0x00000010
-#define BDI_CAP_WRITE_MAP	0x00000020
-#define BDI_CAP_EXEC_MAP	0x00000040
-#define BDI_CAP_NO_ACCT_WB	0x00000080
-#define BDI_CAP_SWAP_BACKED	0x00000100
-
-#define BDI_CAP_VMFLAGS \
-	(BDI_CAP_READ_MAP | BDI_CAP_WRITE_MAP | BDI_CAP_EXEC_MAP)
-
-#define BDI_CAP_NO_ACCT_AND_WRITEBACK \
-	(BDI_CAP_NO_WRITEBACK | BDI_CAP_NO_ACCT_DIRTY | BDI_CAP_NO_ACCT_WB)
-
-#if defined(VM_MAYREAD) && \
-	(BDI_CAP_READ_MAP != VM_MAYREAD || \
-	 BDI_CAP_WRITE_MAP != VM_MAYWRITE || \
-	 BDI_CAP_EXEC_MAP != VM_MAYEXEC)
-#error please change backing_dev_info::capabilities flags
-#endif
-
-extern struct backing_dev_info default_backing_dev_info;
-extern struct backing_dev_info noop_backing_dev_info;
-
-int writeback_in_progress(struct backing_dev_info *bdi);
-
-static inline int bdi_congested(struct backing_dev_info *bdi, int bdi_bits)
-{
-	if (bdi->congested_fn)
-		return bdi->congested_fn(bdi->congested_data, bdi_bits);
-	return (bdi->state & bdi_bits);
-}
-
-static inline int bdi_read_congested(struct backing_dev_info *bdi)
-{
-	return bdi_congested(bdi, 1 << BDI_sync_congested);
-}
-
-static inline int bdi_write_congested(struct backing_dev_info *bdi)
-{
-	return bdi_congested(bdi, 1 << BDI_async_congested);
-}
-
-static inline int bdi_rw_congested(struct backing_dev_info *bdi)
-{
-	return bdi_congested(bdi, (1 << BDI_sync_congested) |
-				  (1 << BDI_async_congested));
-}
-
-enum {
-	BLK_RW_ASYNC	= 0,
-	BLK_RW_SYNC	= 1,
-};
-
-void clear_bdi_congested(struct backing_dev_info *bdi, int sync);
-void set_bdi_congested(struct backing_dev_info *bdi, int sync);
-long congestion_wait(int sync, long timeout);
-long wait_iff_congested(struct zone *zone, int sync, long timeout);
-
-static inline bool bdi_cap_writeback_dirty(struct backing_dev_info *bdi)
-{
-	return !(bdi->capabilities & BDI_CAP_NO_WRITEBACK);
-}
-
-static inline bool bdi_cap_account_dirty(struct backing_dev_info *bdi)
-{
-	return !(bdi->capabilities & BDI_CAP_NO_ACCT_DIRTY);
-}
-
-static inline bool bdi_cap_account_writeback(struct backing_dev_info *bdi)
-{
-	/* Paranoia: BDI_CAP_NO_WRITEBACK implies BDI_CAP_NO_ACCT_WB */
-	return !(bdi->capabilities & (BDI_CAP_NO_ACCT_WB |
-				      BDI_CAP_NO_WRITEBACK));
-}
-
-static inline bool bdi_cap_swap_backed(struct backing_dev_info *bdi)
-{
-	return bdi->capabilities & BDI_CAP_SWAP_BACKED;
-}
-
-static inline bool bdi_cap_flush_forker(struct backing_dev_info *bdi)
-{
-	return bdi == &default_backing_dev_info;
-}
-
-static inline bool mapping_cap_writeback_dirty(struct address_space *mapping)
-{
-	return bdi_cap_writeback_dirty(mapping->backing_dev_info);
-}
-
-static inline bool mapping_cap_account_dirty(struct address_space *mapping)
-{
-	return bdi_cap_account_dirty(mapping->backing_dev_info);
-}
-
-static inline bool mapping_cap_swap_backed(struct address_space *mapping)
-{
-	return bdi_cap_swap_backed(mapping->backing_dev_info);
-}
-
-static inline int bdi_sched_wait(void *word)
-{
-	schedule();
-	return 0;
-}
-
-#endif		/* _LINUX_BACKING_DEV_H */
diff --git a/ANDROID_3.4.5/include/linux/backlight.h b/ANDROID_3.4.5/include/linux/backlight.h
deleted file mode 100644
index 5ffc6dda..00000000
--- a/ANDROID_3.4.5/include/linux/backlight.h
+++ /dev/null
@@ -1,137 +0,0 @@
-/*
- * Backlight Lowlevel Control Abstraction
- *
- * Copyright (C) 2003,2004 Hewlett-Packard Company
- *
- */
-
-#ifndef _LINUX_BACKLIGHT_H
-#define _LINUX_BACKLIGHT_H
-
-#include <linux/device.h>
-#include <linux/mutex.h>
-#include <linux/notifier.h>
-
-/* Notes on locking:
- *
- * backlight_device->ops_lock is an internal backlight lock protecting the
- * ops pointer and no code outside the core should need to touch it.
- *
- * Access to update_status() is serialised by the update_lock mutex since
- * most drivers seem to need this and historically get it wrong.
- *
- * Most drivers don't need locking on their get_brightness() method.
- * If yours does, you need to implement it in the driver. You can use the
- * update_lock mutex if appropriate.
- *
- * Any other use of the locks below is probably wrong.
- */
-
-enum backlight_update_reason {
-	BACKLIGHT_UPDATE_HOTKEY,
-	BACKLIGHT_UPDATE_SYSFS,
-};
-
-enum backlight_type {
-	BACKLIGHT_RAW = 1,
-	BACKLIGHT_PLATFORM,
-	BACKLIGHT_FIRMWARE,
-	BACKLIGHT_TYPE_MAX,
-};
-
-struct backlight_device;
-struct fb_info;
-
-struct backlight_ops {
-	unsigned int options;
-
-#define BL_CORE_SUSPENDRESUME	(1 << 0)
-
-	/* Notify the backlight driver some property has changed */
-	int (*update_status)(struct backlight_device *);
-	/* Return the current backlight brightness (accounting for power,
-	   fb_blank etc.) */
-	int (*get_brightness)(struct backlight_device *);
-	/* Check if given framebuffer device is the one bound to this backlight;
-	   return 0 if not, !=0 if it is. If NULL, backlight always matches the fb. */
-	int (*check_fb)(struct backlight_device *, struct fb_info *);
-};
-
-/* This structure defines all the properties of a backlight */
-struct backlight_properties {
-	/* Current User requested brightness (0 - max_brightness) */
-	int brightness;
-	/* Maximal value for brightness (read-only) */
-	int max_brightness;
-	/* Current FB Power mode (0: full on, 1..3: power saving
-	   modes; 4: full off), see FB_BLANK_XXX */
-	int power;
-	/* FB Blanking active? (values as for power) */
-	/* Due to be removed, please use (state & BL_CORE_FBBLANK) */
-	int fb_blank;
-	/* Backlight type */
-	enum backlight_type type;
-	/* Flags used to signal drivers of state changes */
-	/* Upper 4 bits are reserved for driver internal use */
-	unsigned int state;
-
-#define BL_CORE_SUSPENDED	(1 << 0)	/* backlight is suspended */
-#define BL_CORE_FBBLANK		(1 << 1)	/* backlight is under an fb blank event */
-#define BL_CORE_DRIVER4		(1 << 28)	/* reserved for driver specific use */
-#define BL_CORE_DRIVER3		(1 << 29)	/* reserved for driver specific use */
-#define BL_CORE_DRIVER2		(1 << 30)	/* reserved for driver specific use */
-#define BL_CORE_DRIVER1		(1 << 31)	/* reserved for driver specific use */
-
-};
-
-struct backlight_device {
-	/* Backlight properties */
-	struct backlight_properties props;
-
-	/* Serialise access to update_status method */
-	struct mutex update_lock;
-
-	/* This protects the 'ops' field. If 'ops' is NULL, the driver that
-	   registered this device has been unloaded, and if class_get_devdata()
-	   points to something in the body of that driver, it is also invalid. */
-	struct mutex ops_lock;
-	const struct backlight_ops *ops;
-
-	/* The framebuffer notifier block */
-	struct notifier_block fb_notif;
-
-	struct device dev;
-};
-
-static inline void backlight_update_status(struct backlight_device *bd)
-{
-	mutex_lock(&bd->update_lock);
-	if (bd->ops && bd->ops->update_status)
-		bd->ops->update_status(bd);
-	mutex_unlock(&bd->update_lock);
-}
-
-extern struct backlight_device *backlight_device_register(const char *name,
-	struct device *dev, void *devdata, const struct backlight_ops *ops,
-	const struct backlight_properties *props);
-extern void backlight_device_unregister(struct backlight_device *bd);
-extern void backlight_force_update(struct backlight_device *bd,
-				   enum backlight_update_reason reason);
-
-#define to_backlight_device(obj) container_of(obj, struct backlight_device, dev)
-
-static inline void * bl_get_data(struct backlight_device *bl_dev)
-{
-	return dev_get_drvdata(&bl_dev->dev);
-}
-
-struct generic_bl_info {
-	const char *name;
-	int max_intensity;
-	int default_intensity;
-	int limit_mask;
-	void (*set_bl_intensity)(int intensity);
-	void (*kick_battery)(void);
-};
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/basic_mmio_gpio.h b/ANDROID_3.4.5/include/linux/basic_mmio_gpio.h
deleted file mode 100644
index feb91219..00000000
--- a/ANDROID_3.4.5/include/linux/basic_mmio_gpio.h
+++ /dev/null
@@ -1,72 +0,0 @@
-/*
- * Basic memory-mapped GPIO controllers.
- *
- * Copyright 2008 MontaVista Software, Inc.
- * Copyright 2008,2010 Anton Vorontsov <cbouatmailru@gmail.com>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#ifndef __BASIC_MMIO_GPIO_H
-#define __BASIC_MMIO_GPIO_H
-
-#include <linux/gpio.h>
-#include <linux/types.h>
-#include <linux/compiler.h>
-#include <linux/spinlock_types.h>
-
-struct bgpio_pdata {
-	int base;
-	int ngpio;
-};
-
-struct device;
-
-struct bgpio_chip {
-	struct gpio_chip gc;
-
-	unsigned long (*read_reg)(void __iomem *reg);
-	void (*write_reg)(void __iomem *reg, unsigned long data);
-
-	void __iomem *reg_dat;
-	void __iomem *reg_set;
-	void __iomem *reg_clr;
-	void __iomem *reg_dir;
-
-	/* Number of bits (GPIOs): <register width> * 8. */
-	int bits;
-
-	/*
-	 * Some GPIO controllers work with the big-endian bits notation,
-	 * e.g. in a 8-bits register, GPIO7 is the least significant bit.
-	 */
-	unsigned long (*pin2mask)(struct bgpio_chip *bgc, unsigned int pin);
-
-	/*
-	 * Used to lock bgpio_chip->data. Also, this is needed to keep
-	 * shadowed and real data registers writes together.
-	 */
-	spinlock_t lock;
-
-	/* Shadowed data register to clear/set bits safely. */
-	unsigned long data;
-
-	/* Shadowed direction registers to clear/set direction safely. */
-	unsigned long dir;
-};
-
-static inline struct bgpio_chip *to_bgpio_chip(struct gpio_chip *gc)
-{
-	return container_of(gc, struct bgpio_chip, gc);
-}
-
-int bgpio_remove(struct bgpio_chip *bgc);
-int bgpio_init(struct bgpio_chip *bgc, struct device *dev,
-	       unsigned long sz, void __iomem *dat, void __iomem *set,
-	       void __iomem *clr, void __iomem *dirout, void __iomem *dirin,
-	       bool big_endian);
-
-#endif /* __BASIC_MMIO_GPIO_H */
diff --git a/ANDROID_3.4.5/include/linux/baycom.h b/ANDROID_3.4.5/include/linux/baycom.h
deleted file mode 100644
index 81249e02..00000000
--- a/ANDROID_3.4.5/include/linux/baycom.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * The Linux BAYCOM driver for the Baycom serial 1200 baud modem
- * and the parallel 9600 baud modem
- * (C) 1997-1998 by Thomas Sailer, HB9JNX/AE4WA
- */
-
-#ifndef _BAYCOM_H
-#define _BAYCOM_H
-
-/* -------------------------------------------------------------------- */
-/*
- * structs for the IOCTL commands
- */
-
-struct baycom_debug_data {
-	unsigned long debug1;
-	unsigned long debug2;
-	long debug3;
-};
-
-struct baycom_ioctl {
-	int cmd;
-	union {
-		struct baycom_debug_data dbg;
-	} data;
-};
-
-/* -------------------------------------------------------------------- */
-
-/*
- * ioctl values change for baycom
- */
-#define BAYCOMCTL_GETDEBUG       0x92
-
-/* -------------------------------------------------------------------- */
-
-#endif /* _BAYCOM_H */
-
-/* --------------------------------------------------------------------- */
diff --git a/ANDROID_3.4.5/include/linux/bcd.h b/ANDROID_3.4.5/include/linux/bcd.h
deleted file mode 100644
index 22ea563b..00000000
--- a/ANDROID_3.4.5/include/linux/bcd.h
+++ /dev/null
@@ -1,9 +0,0 @@
-#ifndef _BCD_H
-#define _BCD_H
-
-#include <linux/compiler.h>
-
-unsigned bcd2bin(unsigned char val) __attribute_const__;
-unsigned char bin2bcd(unsigned val) __attribute_const__;
-
-#endif /* _BCD_H */
diff --git a/ANDROID_3.4.5/include/linux/bch.h b/ANDROID_3.4.5/include/linux/bch.h
deleted file mode 100644
index 295b4ef1..00000000
--- a/ANDROID_3.4.5/include/linux/bch.h
+++ /dev/null
@@ -1,79 +0,0 @@
-/*
- * Generic binary BCH encoding/decoding library
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc., 51
- * Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
- *
- * Copyright © 2011 Parrot S.A.
- *
- * Author: Ivan Djelic <ivan.djelic@parrot.com>
- *
- * Description:
- *
- * This library provides runtime configurable encoding/decoding of binary
- * Bose-Chaudhuri-Hocquenghem (BCH) codes.
-*/
-#ifndef _BCH_H
-#define _BCH_H
-
-#include <linux/types.h>
-
-/**
- * struct bch_control - BCH control structure
- * @m:          Galois field order
- * @n:          maximum codeword size in bits (= 2^m-1)
- * @t:          error correction capability in bits
- * @ecc_bits:   ecc exact size in bits, i.e. generator polynomial degree (<=m*t)
- * @ecc_bytes:  ecc max size (m*t bits) in bytes
- * @a_pow_tab:  Galois field GF(2^m) exponentiation lookup table
- * @a_log_tab:  Galois field GF(2^m) log lookup table
- * @mod8_tab:   remainder generator polynomial lookup tables
- * @ecc_buf:    ecc parity words buffer
- * @ecc_buf2:   ecc parity words buffer
- * @xi_tab:     GF(2^m) base for solving degree 2 polynomial roots
- * @syn:        syndrome buffer
- * @cache:      log-based polynomial representation buffer
- * @elp:        error locator polynomial
- * @poly_2t:    temporary polynomials of degree 2t
- */
-struct bch_control {
-	unsigned int    m;
-	unsigned int    n;
-	unsigned int    t;
-	unsigned int    ecc_bits;
-	unsigned int    ecc_bytes;
-/* private: */
-	uint16_t       *a_pow_tab;
-	uint16_t       *a_log_tab;
-	uint32_t       *mod8_tab;
-	uint32_t       *ecc_buf;
-	uint32_t       *ecc_buf2;
-	unsigned int   *xi_tab;
-	unsigned int   *syn;
-	int            *cache;
-	struct gf_poly *elp;
-	struct gf_poly *poly_2t[4];
-};
-
-struct bch_control *init_bch(int m, int t, unsigned int prim_poly);
-
-void free_bch(struct bch_control *bch);
-
-void encode_bch(struct bch_control *bch, const uint8_t *data,
-		unsigned int len, uint8_t *ecc);
-
-int decode_bch(struct bch_control *bch, const uint8_t *data, unsigned int len,
-	       const uint8_t *recv_ecc, const uint8_t *calc_ecc,
-	       const unsigned int *syn, unsigned int *errloc);
-
-#endif /* _BCH_H */
diff --git a/ANDROID_3.4.5/include/linux/bcma/bcma.h b/ANDROID_3.4.5/include/linux/bcma/bcma.h
deleted file mode 100644
index 5af9a075..00000000
--- a/ANDROID_3.4.5/include/linux/bcma/bcma.h
+++ /dev/null
@@ -1,307 +0,0 @@
-#ifndef LINUX_BCMA_H_
-#define LINUX_BCMA_H_
-
-#include <linux/pci.h>
-#include <linux/mod_devicetable.h>
-
-#include <linux/bcma/bcma_driver_chipcommon.h>
-#include <linux/bcma/bcma_driver_pci.h>
-#include <linux/bcma/bcma_driver_mips.h>
-#include <linux/ssb/ssb.h> /* SPROM sharing */
-
-#include "bcma_regs.h"
-
-struct bcma_device;
-struct bcma_bus;
-
-enum bcma_hosttype {
-	BCMA_HOSTTYPE_PCI,
-	BCMA_HOSTTYPE_SDIO,
-	BCMA_HOSTTYPE_SOC,
-};
-
-struct bcma_chipinfo {
-	u16 id;
-	u8 rev;
-	u8 pkg;
-};
-
-enum bcma_clkmode {
-	BCMA_CLKMODE_FAST,
-	BCMA_CLKMODE_DYNAMIC,
-};
-
-struct bcma_host_ops {
-	u8 (*read8)(struct bcma_device *core, u16 offset);
-	u16 (*read16)(struct bcma_device *core, u16 offset);
-	u32 (*read32)(struct bcma_device *core, u16 offset);
-	void (*write8)(struct bcma_device *core, u16 offset, u8 value);
-	void (*write16)(struct bcma_device *core, u16 offset, u16 value);
-	void (*write32)(struct bcma_device *core, u16 offset, u32 value);
-#ifdef CONFIG_BCMA_BLOCKIO
-	void (*block_read)(struct bcma_device *core, void *buffer,
-			   size_t count, u16 offset, u8 reg_width);
-	void (*block_write)(struct bcma_device *core, const void *buffer,
-			    size_t count, u16 offset, u8 reg_width);
-#endif
-	/* Agent ops */
-	u32 (*aread32)(struct bcma_device *core, u16 offset);
-	void (*awrite32)(struct bcma_device *core, u16 offset, u32 value);
-};
-
-/* Core manufacturers */
-#define BCMA_MANUF_ARM			0x43B
-#define BCMA_MANUF_MIPS			0x4A7
-#define BCMA_MANUF_BCM			0x4BF
-
-/* Core class values. */
-#define BCMA_CL_SIM			0x0
-#define BCMA_CL_EROM			0x1
-#define BCMA_CL_CORESIGHT		0x9
-#define BCMA_CL_VERIF			0xB
-#define BCMA_CL_OPTIMO			0xD
-#define BCMA_CL_GEN			0xE
-#define BCMA_CL_PRIMECELL		0xF
-
-/* Core-ID values. */
-#define BCMA_CORE_OOB_ROUTER		0x367	/* Out of band */
-#define BCMA_CORE_INVALID		0x700
-#define BCMA_CORE_CHIPCOMMON		0x800
-#define BCMA_CORE_ILINE20		0x801
-#define BCMA_CORE_SRAM			0x802
-#define BCMA_CORE_SDRAM			0x803
-#define BCMA_CORE_PCI			0x804
-#define BCMA_CORE_MIPS			0x805
-#define BCMA_CORE_ETHERNET		0x806
-#define BCMA_CORE_V90			0x807
-#define BCMA_CORE_USB11_HOSTDEV		0x808
-#define BCMA_CORE_ADSL			0x809
-#define BCMA_CORE_ILINE100		0x80A
-#define BCMA_CORE_IPSEC			0x80B
-#define BCMA_CORE_UTOPIA		0x80C
-#define BCMA_CORE_PCMCIA		0x80D
-#define BCMA_CORE_INTERNAL_MEM		0x80E
-#define BCMA_CORE_MEMC_SDRAM		0x80F
-#define BCMA_CORE_OFDM			0x810
-#define BCMA_CORE_EXTIF			0x811
-#define BCMA_CORE_80211			0x812
-#define BCMA_CORE_PHY_A			0x813
-#define BCMA_CORE_PHY_B			0x814
-#define BCMA_CORE_PHY_G			0x815
-#define BCMA_CORE_MIPS_3302		0x816
-#define BCMA_CORE_USB11_HOST		0x817
-#define BCMA_CORE_USB11_DEV		0x818
-#define BCMA_CORE_USB20_HOST		0x819
-#define BCMA_CORE_USB20_DEV		0x81A
-#define BCMA_CORE_SDIO_HOST		0x81B
-#define BCMA_CORE_ROBOSWITCH		0x81C
-#define BCMA_CORE_PARA_ATA		0x81D
-#define BCMA_CORE_SATA_XORDMA		0x81E
-#define BCMA_CORE_ETHERNET_GBIT		0x81F
-#define BCMA_CORE_PCIE			0x820
-#define BCMA_CORE_PHY_N			0x821
-#define BCMA_CORE_SRAM_CTL		0x822
-#define BCMA_CORE_MINI_MACPHY		0x823
-#define BCMA_CORE_ARM_1176		0x824
-#define BCMA_CORE_ARM_7TDMI		0x825
-#define BCMA_CORE_PHY_LP		0x826
-#define BCMA_CORE_PMU			0x827
-#define BCMA_CORE_PHY_SSN		0x828
-#define BCMA_CORE_SDIO_DEV		0x829
-#define BCMA_CORE_ARM_CM3		0x82A
-#define BCMA_CORE_PHY_HT		0x82B
-#define BCMA_CORE_MIPS_74K		0x82C
-#define BCMA_CORE_MAC_GBIT		0x82D
-#define BCMA_CORE_DDR12_MEM_CTL		0x82E
-#define BCMA_CORE_PCIE_RC		0x82F	/* PCIe Root Complex */
-#define BCMA_CORE_OCP_OCP_BRIDGE	0x830
-#define BCMA_CORE_SHARED_COMMON		0x831
-#define BCMA_CORE_OCP_AHB_BRIDGE	0x832
-#define BCMA_CORE_SPI_HOST		0x833
-#define BCMA_CORE_I2S			0x834
-#define BCMA_CORE_SDR_DDR1_MEM_CTL	0x835	/* SDR/DDR1 memory controller core */
-#define BCMA_CORE_SHIM			0x837	/* SHIM component in ubus/6362 */
-#define BCMA_CORE_DEFAULT		0xFFF
-
-#define BCMA_MAX_NR_CORES		16
-
-struct bcma_device {
-	struct bcma_bus *bus;
-	struct bcma_device_id id;
-
-	struct device dev;
-	struct device *dma_dev;
-
-	unsigned int irq;
-	bool dev_registered;
-
-	u8 core_index;
-	u8 core_unit;
-
-	u32 addr;
-	u32 wrap;
-
-	void __iomem *io_addr;
-	void __iomem *io_wrap;
-
-	void *drvdata;
-	struct list_head list;
-};
-
-static inline void *bcma_get_drvdata(struct bcma_device *core)
-{
-	return core->drvdata;
-}
-static inline void bcma_set_drvdata(struct bcma_device *core, void *drvdata)
-{
-	core->drvdata = drvdata;
-}
-
-struct bcma_driver {
-	const char *name;
-	const struct bcma_device_id *id_table;
-
-	int (*probe)(struct bcma_device *dev);
-	void (*remove)(struct bcma_device *dev);
-	int (*suspend)(struct bcma_device *dev);
-	int (*resume)(struct bcma_device *dev);
-	void (*shutdown)(struct bcma_device *dev);
-
-	struct device_driver drv;
-};
-extern
-int __bcma_driver_register(struct bcma_driver *drv, struct module *owner);
-#define bcma_driver_register(drv) \
-	__bcma_driver_register(drv, THIS_MODULE)
-
-extern void bcma_driver_unregister(struct bcma_driver *drv);
-
-/* Set a fallback SPROM.
- * See kdoc at the function definition for complete documentation. */
-extern int bcma_arch_register_fallback_sprom(
-		int (*sprom_callback)(struct bcma_bus *bus,
-		struct ssb_sprom *out));
-
-struct bcma_bus {
-	/* The MMIO area. */
-	void __iomem *mmio;
-
-	const struct bcma_host_ops *ops;
-
-	enum bcma_hosttype hosttype;
-	union {
-		/* Pointer to the PCI bus (only for BCMA_HOSTTYPE_PCI) */
-		struct pci_dev *host_pci;
-		/* Pointer to the SDIO device (only for BCMA_HOSTTYPE_SDIO) */
-		struct sdio_func *host_sdio;
-	};
-
-	struct bcma_chipinfo chipinfo;
-
-	struct bcma_device *mapped_core;
-	struct list_head cores;
-	u8 nr_cores;
-	u8 init_done:1;
-	u8 num;
-
-	struct bcma_drv_cc drv_cc;
-	struct bcma_drv_pci drv_pci;
-	struct bcma_drv_mips drv_mips;
-
-	/* We decided to share SPROM struct with SSB as long as we do not need
-	 * any hacks for BCMA. This simplifies drivers code. */
-	struct ssb_sprom sprom;
-};
-
-static inline u32 bcma_read8(struct bcma_device *core, u16 offset)
-{
-	return core->bus->ops->read8(core, offset);
-}
-static inline u32 bcma_read16(struct bcma_device *core, u16 offset)
-{
-	return core->bus->ops->read16(core, offset);
-}
-static inline u32 bcma_read32(struct bcma_device *core, u16 offset)
-{
-	return core->bus->ops->read32(core, offset);
-}
-static inline
-void bcma_write8(struct bcma_device *core, u16 offset, u32 value)
-{
-	core->bus->ops->write8(core, offset, value);
-}
-static inline
-void bcma_write16(struct bcma_device *core, u16 offset, u32 value)
-{
-	core->bus->ops->write16(core, offset, value);
-}
-static inline
-void bcma_write32(struct bcma_device *core, u16 offset, u32 value)
-{
-	core->bus->ops->write32(core, offset, value);
-}
-#ifdef CONFIG_BCMA_BLOCKIO
-static inline void bcma_block_read(struct bcma_device *core, void *buffer,
-				   size_t count, u16 offset, u8 reg_width)
-{
-	core->bus->ops->block_read(core, buffer, count, offset, reg_width);
-}
-static inline void bcma_block_write(struct bcma_device *core,
-				    const void *buffer, size_t count,
-				    u16 offset, u8 reg_width)
-{
-	core->bus->ops->block_write(core, buffer, count, offset, reg_width);
-}
-#endif
-static inline u32 bcma_aread32(struct bcma_device *core, u16 offset)
-{
-	return core->bus->ops->aread32(core, offset);
-}
-static inline
-void bcma_awrite32(struct bcma_device *core, u16 offset, u32 value)
-{
-	core->bus->ops->awrite32(core, offset, value);
-}
-
-static inline void bcma_mask32(struct bcma_device *cc, u16 offset, u32 mask)
-{
-	bcma_write32(cc, offset, bcma_read32(cc, offset) & mask);
-}
-static inline void bcma_set32(struct bcma_device *cc, u16 offset, u32 set)
-{
-	bcma_write32(cc, offset, bcma_read32(cc, offset) | set);
-}
-static inline void bcma_maskset32(struct bcma_device *cc,
-				  u16 offset, u32 mask, u32 set)
-{
-	bcma_write32(cc, offset, (bcma_read32(cc, offset) & mask) | set);
-}
-static inline void bcma_mask16(struct bcma_device *cc, u16 offset, u16 mask)
-{
-	bcma_write16(cc, offset, bcma_read16(cc, offset) & mask);
-}
-static inline void bcma_set16(struct bcma_device *cc, u16 offset, u16 set)
-{
-	bcma_write16(cc, offset, bcma_read16(cc, offset) | set);
-}
-static inline void bcma_maskset16(struct bcma_device *cc,
-				  u16 offset, u16 mask, u16 set)
-{
-	bcma_write16(cc, offset, (bcma_read16(cc, offset) & mask) | set);
-}
-
-extern struct bcma_device *bcma_find_core(struct bcma_bus *bus, u16 coreid);
-extern bool bcma_core_is_enabled(struct bcma_device *core);
-extern void bcma_core_disable(struct bcma_device *core, u32 flags);
-extern int bcma_core_enable(struct bcma_device *core, u32 flags);
-extern void bcma_core_set_clockmode(struct bcma_device *core,
-				    enum bcma_clkmode clkmode);
-extern void bcma_core_pll_ctl(struct bcma_device *core, u32 req, u32 status,
-			      bool on);
-#define BCMA_DMA_TRANSLATION_MASK	0xC0000000
-#define  BCMA_DMA_TRANSLATION_NONE	0x00000000
-#define  BCMA_DMA_TRANSLATION_DMA32_CMT	0x40000000 /* Client Mode Translation for 32-bit DMA */
-#define  BCMA_DMA_TRANSLATION_DMA64_CMT	0x80000000 /* Client Mode Translation for 64-bit DMA */
-extern u32 bcma_core_dma_translation(struct bcma_device *core);
-
-#endif /* LINUX_BCMA_H_ */
diff --git a/ANDROID_3.4.5/include/linux/bcma/bcma_driver_chipcommon.h b/ANDROID_3.4.5/include/linux/bcma/bcma_driver_chipcommon.h
deleted file mode 100644
index 8bbfe31f..00000000
--- a/ANDROID_3.4.5/include/linux/bcma/bcma_driver_chipcommon.h
+++ /dev/null
@@ -1,415 +0,0 @@
-#ifndef LINUX_BCMA_DRIVER_CC_H_
-#define LINUX_BCMA_DRIVER_CC_H_
-
-/** ChipCommon core registers. **/
-#define BCMA_CC_ID			0x0000
-#define  BCMA_CC_ID_ID			0x0000FFFF
-#define  BCMA_CC_ID_ID_SHIFT		0
-#define  BCMA_CC_ID_REV			0x000F0000
-#define  BCMA_CC_ID_REV_SHIFT		16
-#define  BCMA_CC_ID_PKG			0x00F00000
-#define  BCMA_CC_ID_PKG_SHIFT		20
-#define  BCMA_CC_ID_NRCORES		0x0F000000
-#define  BCMA_CC_ID_NRCORES_SHIFT	24
-#define  BCMA_CC_ID_TYPE		0xF0000000
-#define  BCMA_CC_ID_TYPE_SHIFT		28
-#define BCMA_CC_CAP			0x0004		/* Capabilities */
-#define  BCMA_CC_CAP_NRUART		0x00000003	/* # of UARTs */
-#define  BCMA_CC_CAP_MIPSEB		0x00000004	/* MIPS in BigEndian Mode */
-#define  BCMA_CC_CAP_UARTCLK		0x00000018	/* UART clock select */
-#define   BCMA_CC_CAP_UARTCLK_INT	0x00000008	/* UARTs are driven by internal divided clock */
-#define  BCMA_CC_CAP_UARTGPIO		0x00000020	/* UARTs on GPIO 15-12 */
-#define  BCMA_CC_CAP_EXTBUS		0x000000C0	/* External buses present */
-#define  BCMA_CC_CAP_FLASHT		0x00000700	/* Flash Type */
-#define   BCMA_CC_FLASHT_NONE		0x00000000	/* No flash */
-#define   BCMA_CC_FLASHT_STSER		0x00000100	/* ST serial flash */
-#define   BCMA_CC_FLASHT_ATSER		0x00000200	/* Atmel serial flash */
-#define   BCMA_CC_FLASHT_NFLASH		0x00000200
-#define	  BCMA_CC_FLASHT_PARA		0x00000700	/* Parallel flash */
-#define  BCMA_CC_CAP_PLLT		0x00038000	/* PLL Type */
-#define   BCMA_PLLTYPE_NONE		0x00000000
-#define   BCMA_PLLTYPE_1		0x00010000	/* 48Mhz base, 3 dividers */
-#define   BCMA_PLLTYPE_2		0x00020000	/* 48Mhz, 4 dividers */
-#define   BCMA_PLLTYPE_3		0x00030000	/* 25Mhz, 2 dividers */
-#define   BCMA_PLLTYPE_4		0x00008000	/* 48Mhz, 4 dividers */
-#define   BCMA_PLLTYPE_5		0x00018000	/* 25Mhz, 4 dividers */
-#define   BCMA_PLLTYPE_6		0x00028000	/* 100/200 or 120/240 only */
-#define   BCMA_PLLTYPE_7		0x00038000	/* 25Mhz, 4 dividers */
-#define  BCMA_CC_CAP_PCTL		0x00040000	/* Power Control */
-#define  BCMA_CC_CAP_OTPS		0x00380000	/* OTP size */
-#define  BCMA_CC_CAP_OTPS_SHIFT		19
-#define  BCMA_CC_CAP_OTPS_BASE		5
-#define  BCMA_CC_CAP_JTAGM		0x00400000	/* JTAG master present */
-#define  BCMA_CC_CAP_BROM		0x00800000	/* Internal boot ROM active */
-#define  BCMA_CC_CAP_64BIT		0x08000000	/* 64-bit Backplane */
-#define  BCMA_CC_CAP_PMU		0x10000000	/* PMU available (rev >= 20) */
-#define  BCMA_CC_CAP_ECI		0x20000000	/* ECI available (rev >= 20) */
-#define  BCMA_CC_CAP_SPROM		0x40000000	/* SPROM present */
-#define BCMA_CC_CORECTL			0x0008
-#define  BCMA_CC_CORECTL_UARTCLK0	0x00000001	/* Drive UART with internal clock */
-#define	 BCMA_CC_CORECTL_SE		0x00000002	/* sync clk out enable (corerev >= 3) */
-#define  BCMA_CC_CORECTL_UARTCLKEN	0x00000008	/* UART clock enable (rev >= 21) */
-#define BCMA_CC_BIST			0x000C
-#define BCMA_CC_OTPS			0x0010		/* OTP status */
-#define	 BCMA_CC_OTPS_PROGFAIL		0x80000000
-#define	 BCMA_CC_OTPS_PROTECT		0x00000007
-#define	 BCMA_CC_OTPS_HW_PROTECT	0x00000001
-#define	 BCMA_CC_OTPS_SW_PROTECT	0x00000002
-#define	 BCMA_CC_OTPS_CID_PROTECT	0x00000004
-#define  BCMA_CC_OTPS_GU_PROG_IND	0x00000F00	/* General Use programmed indication */
-#define  BCMA_CC_OTPS_GU_PROG_IND_SHIFT	8
-#define  BCMA_CC_OTPS_GU_PROG_HW	0x00000100	/* HW region programmed */
-#define BCMA_CC_OTPC			0x0014		/* OTP control */
-#define	 BCMA_CC_OTPC_RECWAIT		0xFF000000
-#define	 BCMA_CC_OTPC_PROGWAIT		0x00FFFF00
-#define	 BCMA_CC_OTPC_PRW_SHIFT		8
-#define	 BCMA_CC_OTPC_MAXFAIL		0x00000038
-#define	 BCMA_CC_OTPC_VSEL		0x00000006
-#define	 BCMA_CC_OTPC_SELVL		0x00000001
-#define BCMA_CC_OTPP			0x0018		/* OTP prog */
-#define	 BCMA_CC_OTPP_COL		0x000000FF
-#define	 BCMA_CC_OTPP_ROW		0x0000FF00
-#define	 BCMA_CC_OTPP_ROW_SHIFT		8
-#define	 BCMA_CC_OTPP_READERR		0x10000000
-#define	 BCMA_CC_OTPP_VALUE		0x20000000
-#define	 BCMA_CC_OTPP_READ		0x40000000
-#define	 BCMA_CC_OTPP_START		0x80000000
-#define	 BCMA_CC_OTPP_BUSY		0x80000000
-#define BCMA_CC_OTPL			0x001C		/* OTP layout */
-#define  BCMA_CC_OTPL_GURGN_OFFSET	0x00000FFF	/* offset of general use region */
-#define BCMA_CC_IRQSTAT			0x0020
-#define BCMA_CC_IRQMASK			0x0024
-#define	 BCMA_CC_IRQ_GPIO		0x00000001	/* gpio intr */
-#define	 BCMA_CC_IRQ_EXT		0x00000002	/* ro: ext intr pin (corerev >= 3) */
-#define	 BCMA_CC_IRQ_WDRESET		0x80000000	/* watchdog reset occurred */
-#define BCMA_CC_CHIPCTL			0x0028		/* Rev >= 11 only */
-#define BCMA_CC_CHIPSTAT		0x002C		/* Rev >= 11 only */
-#define  BCMA_CC_CHIPST_4313_SPROM_PRESENT	1
-#define  BCMA_CC_CHIPST_4313_OTP_PRESENT	2
-#define  BCMA_CC_CHIPST_4331_SPROM_PRESENT	2
-#define  BCMA_CC_CHIPST_4331_OTP_PRESENT	4
-#define BCMA_CC_JCMD			0x0030		/* Rev >= 10 only */
-#define  BCMA_CC_JCMD_START		0x80000000
-#define  BCMA_CC_JCMD_BUSY		0x80000000
-#define  BCMA_CC_JCMD_PAUSE		0x40000000
-#define  BCMA_CC_JCMD0_ACC_MASK		0x0000F000
-#define  BCMA_CC_JCMD0_ACC_IRDR		0x00000000
-#define  BCMA_CC_JCMD0_ACC_DR		0x00001000
-#define  BCMA_CC_JCMD0_ACC_IR		0x00002000
-#define  BCMA_CC_JCMD0_ACC_RESET	0x00003000
-#define  BCMA_CC_JCMD0_ACC_IRPDR	0x00004000
-#define  BCMA_CC_JCMD0_ACC_PDR		0x00005000
-#define  BCMA_CC_JCMD0_IRW_MASK		0x00000F00
-#define  BCMA_CC_JCMD_ACC_MASK		0x000F0000	/* Changes for corerev 11 */
-#define  BCMA_CC_JCMD_ACC_IRDR		0x00000000
-#define  BCMA_CC_JCMD_ACC_DR		0x00010000
-#define  BCMA_CC_JCMD_ACC_IR		0x00020000
-#define  BCMA_CC_JCMD_ACC_RESET		0x00030000
-#define  BCMA_CC_JCMD_ACC_IRPDR		0x00040000
-#define  BCMA_CC_JCMD_ACC_PDR		0x00050000
-#define  BCMA_CC_JCMD_IRW_MASK		0x00001F00
-#define  BCMA_CC_JCMD_IRW_SHIFT		8
-#define  BCMA_CC_JCMD_DRW_MASK		0x0000003F
-#define BCMA_CC_JIR			0x0034		/* Rev >= 10 only */
-#define BCMA_CC_JDR			0x0038		/* Rev >= 10 only */
-#define BCMA_CC_JCTL			0x003C		/* Rev >= 10 only */
-#define  BCMA_CC_JCTL_FORCE_CLK		4		/* Force clock */
-#define  BCMA_CC_JCTL_EXT_EN		2		/* Enable external targets */
-#define  BCMA_CC_JCTL_EN		1		/* Enable Jtag master */
-#define BCMA_CC_FLASHCTL		0x0040
-#define  BCMA_CC_FLASHCTL_START		0x80000000
-#define  BCMA_CC_FLASHCTL_BUSY		BCMA_CC_FLASHCTL_START
-#define BCMA_CC_FLASHADDR		0x0044
-#define BCMA_CC_FLASHDATA		0x0048
-#define BCMA_CC_BCAST_ADDR		0x0050
-#define BCMA_CC_BCAST_DATA		0x0054
-#define BCMA_CC_GPIOPULLUP		0x0058		/* Rev >= 20 only */
-#define BCMA_CC_GPIOPULLDOWN		0x005C		/* Rev >= 20 only */
-#define BCMA_CC_GPIOIN			0x0060
-#define BCMA_CC_GPIOOUT			0x0064
-#define BCMA_CC_GPIOOUTEN		0x0068
-#define BCMA_CC_GPIOCTL			0x006C
-#define BCMA_CC_GPIOPOL			0x0070
-#define BCMA_CC_GPIOIRQ			0x0074
-#define BCMA_CC_WATCHDOG		0x0080
-#define BCMA_CC_GPIOTIMER		0x0088		/* LED powersave (corerev >= 16) */
-#define  BCMA_CC_GPIOTIMER_OFFTIME	0x0000FFFF
-#define  BCMA_CC_GPIOTIMER_OFFTIME_SHIFT	0
-#define  BCMA_CC_GPIOTIMER_ONTIME	0xFFFF0000
-#define  BCMA_CC_GPIOTIMER_ONTIME_SHIFT	16
-#define BCMA_CC_GPIOTOUTM		0x008C		/* LED powersave (corerev >= 16) */
-#define BCMA_CC_CLOCK_N			0x0090
-#define BCMA_CC_CLOCK_SB		0x0094
-#define BCMA_CC_CLOCK_PCI		0x0098
-#define BCMA_CC_CLOCK_M2		0x009C
-#define BCMA_CC_CLOCK_MIPS		0x00A0
-#define BCMA_CC_CLKDIV			0x00A4		/* Rev >= 3 only */
-#define	 BCMA_CC_CLKDIV_SFLASH		0x0F000000
-#define	 BCMA_CC_CLKDIV_SFLASH_SHIFT	24
-#define	 BCMA_CC_CLKDIV_OTP		0x000F0000
-#define	 BCMA_CC_CLKDIV_OTP_SHIFT	16
-#define	 BCMA_CC_CLKDIV_JTAG		0x00000F00
-#define	 BCMA_CC_CLKDIV_JTAG_SHIFT	8
-#define	 BCMA_CC_CLKDIV_UART		0x000000FF
-#define BCMA_CC_CAP_EXT			0x00AC		/* Capabilities */
-#define BCMA_CC_PLLONDELAY		0x00B0		/* Rev >= 4 only */
-#define BCMA_CC_FREFSELDELAY		0x00B4		/* Rev >= 4 only */
-#define BCMA_CC_SLOWCLKCTL		0x00B8		/* 6 <= Rev <= 9 only */
-#define  BCMA_CC_SLOWCLKCTL_SRC		0x00000007	/* slow clock source mask */
-#define	  BCMA_CC_SLOWCLKCTL_SRC_LPO	0x00000000	/* source of slow clock is LPO */
-#define   BCMA_CC_SLOWCLKCTL_SRC_XTAL	0x00000001	/* source of slow clock is crystal */
-#define	  BCMA_CC_SLOECLKCTL_SRC_PCI	0x00000002	/* source of slow clock is PCI */
-#define  BCMA_CC_SLOWCLKCTL_LPOFREQ	0x00000200	/* LPOFreqSel, 1: 160Khz, 0: 32KHz */
-#define  BCMA_CC_SLOWCLKCTL_LPOPD	0x00000400	/* LPOPowerDown, 1: LPO is disabled, 0: LPO is enabled */
-#define  BCMA_CC_SLOWCLKCTL_FSLOW	0x00000800	/* ForceSlowClk, 1: sb/cores running on slow clock, 0: power logic control */
-#define  BCMA_CC_SLOWCLKCTL_IPLL	0x00001000	/* IgnorePllOffReq, 1/0: power logic ignores/honors PLL clock disable requests from core */
-#define  BCMA_CC_SLOWCLKCTL_ENXTAL	0x00002000	/* XtalControlEn, 1/0: power logic does/doesn't disable crystal when appropriate */
-#define  BCMA_CC_SLOWCLKCTL_XTALPU	0x00004000	/* XtalPU (RO), 1/0: crystal running/disabled */
-#define  BCMA_CC_SLOWCLKCTL_CLKDIV	0xFFFF0000	/* ClockDivider (SlowClk = 1/(4+divisor)) */
-#define  BCMA_CC_SLOWCLKCTL_CLKDIV_SHIFT	16
-#define BCMA_CC_SYSCLKCTL		0x00C0		/* Rev >= 3 only */
-#define	 BCMA_CC_SYSCLKCTL_IDLPEN	0x00000001	/* ILPen: Enable Idle Low Power */
-#define	 BCMA_CC_SYSCLKCTL_ALPEN	0x00000002	/* ALPen: Enable Active Low Power */
-#define	 BCMA_CC_SYSCLKCTL_PLLEN	0x00000004	/* ForcePLLOn */
-#define	 BCMA_CC_SYSCLKCTL_FORCEALP	0x00000008	/* Force ALP (or HT if ALPen is not set */
-#define	 BCMA_CC_SYSCLKCTL_FORCEHT	0x00000010	/* Force HT */
-#define  BCMA_CC_SYSCLKCTL_CLKDIV	0xFFFF0000	/* ClkDiv  (ILP = 1/(4+divisor)) */
-#define  BCMA_CC_SYSCLKCTL_CLKDIV_SHIFT	16
-#define BCMA_CC_CLKSTSTR		0x00C4		/* Rev >= 3 only */
-#define BCMA_CC_EROM			0x00FC
-#define BCMA_CC_PCMCIA_CFG		0x0100
-#define BCMA_CC_PCMCIA_MEMWAIT		0x0104
-#define BCMA_CC_PCMCIA_ATTRWAIT		0x0108
-#define BCMA_CC_PCMCIA_IOWAIT		0x010C
-#define BCMA_CC_IDE_CFG			0x0110
-#define BCMA_CC_IDE_MEMWAIT		0x0114
-#define BCMA_CC_IDE_ATTRWAIT		0x0118
-#define BCMA_CC_IDE_IOWAIT		0x011C
-#define BCMA_CC_PROG_CFG		0x0120
-#define BCMA_CC_PROG_WAITCNT		0x0124
-#define BCMA_CC_FLASH_CFG		0x0128
-#define  BCMA_CC_FLASH_CFG_DS		0x0010	/* Data size, 0=8bit, 1=16bit */
-#define BCMA_CC_FLASH_WAITCNT		0x012C
-#define BCMA_CC_SROM_CONTROL		0x0190
-#define  BCMA_CC_SROM_CONTROL_START	0x80000000
-#define  BCMA_CC_SROM_CONTROL_BUSY	0x80000000
-#define  BCMA_CC_SROM_CONTROL_OPCODE	0x60000000
-#define  BCMA_CC_SROM_CONTROL_OP_READ	0x00000000
-#define  BCMA_CC_SROM_CONTROL_OP_WRITE	0x20000000
-#define  BCMA_CC_SROM_CONTROL_OP_WRDIS	0x40000000
-#define  BCMA_CC_SROM_CONTROL_OP_WREN	0x60000000
-#define  BCMA_CC_SROM_CONTROL_OTPSEL	0x00000010
-#define  BCMA_CC_SROM_CONTROL_LOCK	0x00000008
-#define  BCMA_CC_SROM_CONTROL_SIZE_MASK	0x00000006
-#define  BCMA_CC_SROM_CONTROL_SIZE_1K	0x00000000
-#define  BCMA_CC_SROM_CONTROL_SIZE_4K	0x00000002
-#define  BCMA_CC_SROM_CONTROL_SIZE_16K	0x00000004
-#define  BCMA_CC_SROM_CONTROL_SIZE_SHIFT	1
-#define  BCMA_CC_SROM_CONTROL_PRESENT	0x00000001
-/* 0x1E0 is defined as shared BCMA_CLKCTLST */
-#define BCMA_CC_HW_WORKAROUND		0x01E4 /* Hardware workaround (rev >= 20) */
-#define BCMA_CC_UART0_DATA		0x0300
-#define BCMA_CC_UART0_IMR		0x0304
-#define BCMA_CC_UART0_FCR		0x0308
-#define BCMA_CC_UART0_LCR		0x030C
-#define BCMA_CC_UART0_MCR		0x0310
-#define BCMA_CC_UART0_LSR		0x0314
-#define BCMA_CC_UART0_MSR		0x0318
-#define BCMA_CC_UART0_SCRATCH		0x031C
-#define BCMA_CC_UART1_DATA		0x0400
-#define BCMA_CC_UART1_IMR		0x0404
-#define BCMA_CC_UART1_FCR		0x0408
-#define BCMA_CC_UART1_LCR		0x040C
-#define BCMA_CC_UART1_MCR		0x0410
-#define BCMA_CC_UART1_LSR		0x0414
-#define BCMA_CC_UART1_MSR		0x0418
-#define BCMA_CC_UART1_SCRATCH		0x041C
-/* PMU registers (rev >= 20) */
-#define BCMA_CC_PMU_CTL			0x0600 /* PMU control */
-#define  BCMA_CC_PMU_CTL_ILP_DIV	0xFFFF0000 /* ILP div mask */
-#define  BCMA_CC_PMU_CTL_ILP_DIV_SHIFT	16
-#define  BCMA_CC_PMU_CTL_PLL_UPD	0x00000400
-#define  BCMA_CC_PMU_CTL_NOILPONW	0x00000200 /* No ILP on wait */
-#define  BCMA_CC_PMU_CTL_HTREQEN	0x00000100 /* HT req enable */
-#define  BCMA_CC_PMU_CTL_ALPREQEN	0x00000080 /* ALP req enable */
-#define  BCMA_CC_PMU_CTL_XTALFREQ	0x0000007C /* Crystal freq */
-#define  BCMA_CC_PMU_CTL_XTALFREQ_SHIFT	2
-#define  BCMA_CC_PMU_CTL_ILPDIVEN	0x00000002 /* ILP div enable */
-#define  BCMA_CC_PMU_CTL_LPOSEL		0x00000001 /* LPO sel */
-#define BCMA_CC_PMU_CAP			0x0604 /* PMU capabilities */
-#define  BCMA_CC_PMU_CAP_REVISION	0x000000FF /* Revision mask */
-#define BCMA_CC_PMU_STAT		0x0608 /* PMU status */
-#define  BCMA_CC_PMU_STAT_INTPEND	0x00000040 /* Interrupt pending */
-#define  BCMA_CC_PMU_STAT_SBCLKST	0x00000030 /* Backplane clock status? */
-#define  BCMA_CC_PMU_STAT_HAVEALP	0x00000008 /* ALP available */
-#define  BCMA_CC_PMU_STAT_HAVEHT	0x00000004 /* HT available */
-#define  BCMA_CC_PMU_STAT_RESINIT	0x00000003 /* Res init */
-#define BCMA_CC_PMU_RES_STAT		0x060C /* PMU res status */
-#define BCMA_CC_PMU_RES_PEND		0x0610 /* PMU res pending */
-#define BCMA_CC_PMU_TIMER		0x0614 /* PMU timer */
-#define BCMA_CC_PMU_MINRES_MSK		0x0618 /* PMU min res mask */
-#define BCMA_CC_PMU_MAXRES_MSK		0x061C /* PMU max res mask */
-#define BCMA_CC_PMU_RES_TABSEL		0x0620 /* PMU res table sel */
-#define BCMA_CC_PMU_RES_DEPMSK		0x0624 /* PMU res dep mask */
-#define BCMA_CC_PMU_RES_UPDNTM		0x0628 /* PMU res updown timer */
-#define BCMA_CC_PMU_RES_TIMER		0x062C /* PMU res timer */
-#define BCMA_CC_PMU_CLKSTRETCH		0x0630 /* PMU clockstretch */
-#define BCMA_CC_PMU_WATCHDOG		0x0634 /* PMU watchdog */
-#define BCMA_CC_PMU_RES_REQTS		0x0640 /* PMU res req timer sel */
-#define BCMA_CC_PMU_RES_REQT		0x0644 /* PMU res req timer */
-#define BCMA_CC_PMU_RES_REQM		0x0648 /* PMU res req mask */
-#define BCMA_CC_CHIPCTL_ADDR		0x0650
-#define BCMA_CC_CHIPCTL_DATA		0x0654
-#define BCMA_CC_REGCTL_ADDR		0x0658
-#define BCMA_CC_REGCTL_DATA		0x065C
-#define BCMA_CC_PLLCTL_ADDR		0x0660
-#define BCMA_CC_PLLCTL_DATA		0x0664
-#define BCMA_CC_SPROM			0x0800 /* SPROM beginning */
-
-/* Divider allocation in 4716/47162/5356 */
-#define BCMA_CC_PMU5_MAINPLL_CPU	1
-#define BCMA_CC_PMU5_MAINPLL_MEM	2
-#define BCMA_CC_PMU5_MAINPLL_SSB	3
-
-/* PLL usage in 4716/47162 */
-#define BCMA_CC_PMU4716_MAINPLL_PLL0	12
-
-/* PLL usage in 5356/5357 */
-#define BCMA_CC_PMU5356_MAINPLL_PLL0	0
-#define BCMA_CC_PMU5357_MAINPLL_PLL0	0
-
-/* 4706 PMU */
-#define BCMA_CC_PMU4706_MAINPLL_PLL0	0
-
-/* ALP clock on pre-PMU chips */
-#define BCMA_CC_PMU_ALP_CLOCK		20000000
-/* HT clock for systems with PMU-enabled chipcommon */
-#define BCMA_CC_PMU_HT_CLOCK		80000000
-
-/* PMU rev 5 (& 6) */
-#define BCMA_CC_PPL_P1P2_OFF		0
-#define BCMA_CC_PPL_P1_MASK		0x0f000000
-#define BCMA_CC_PPL_P1_SHIFT		24
-#define BCMA_CC_PPL_P2_MASK		0x00f00000
-#define BCMA_CC_PPL_P2_SHIFT		20
-#define BCMA_CC_PPL_M14_OFF		1
-#define BCMA_CC_PPL_MDIV_MASK		0x000000ff
-#define BCMA_CC_PPL_MDIV_WIDTH		8
-#define BCMA_CC_PPL_NM5_OFF		2
-#define BCMA_CC_PPL_NDIV_MASK		0xfff00000
-#define BCMA_CC_PPL_NDIV_SHIFT		20
-#define BCMA_CC_PPL_FMAB_OFF		3
-#define BCMA_CC_PPL_MRAT_MASK		0xf0000000
-#define BCMA_CC_PPL_MRAT_SHIFT		28
-#define BCMA_CC_PPL_ABRAT_MASK		0x08000000
-#define BCMA_CC_PPL_ABRAT_SHIFT		27
-#define BCMA_CC_PPL_FDIV_MASK		0x07ffffff
-#define BCMA_CC_PPL_PLLCTL_OFF		4
-#define BCMA_CC_PPL_PCHI_OFF		5
-#define BCMA_CC_PPL_PCHI_MASK		0x0000003f
-
-/* BCM4331 ChipControl numbers. */
-#define BCMA_CHIPCTL_4331_BT_COEXIST		BIT(0)	/* 0 disable */
-#define BCMA_CHIPCTL_4331_SECI			BIT(1)	/* 0 SECI is disabled (JATG functional) */
-#define BCMA_CHIPCTL_4331_EXT_LNA		BIT(2)	/* 0 disable */
-#define BCMA_CHIPCTL_4331_SPROM_GPIO13_15	BIT(3)	/* sprom/gpio13-15 mux */
-#define BCMA_CHIPCTL_4331_EXTPA_EN		BIT(4)	/* 0 ext pa disable, 1 ext pa enabled */
-#define BCMA_CHIPCTL_4331_GPIOCLK_ON_SPROMCS	BIT(5)	/* set drive out GPIO_CLK on sprom_cs pin */
-#define BCMA_CHIPCTL_4331_PCIE_MDIO_ON_SPROMCS	BIT(6)	/* use sprom_cs pin as PCIE mdio interface */
-#define BCMA_CHIPCTL_4331_EXTPA_ON_GPIO2_5	BIT(7)	/* aband extpa will be at gpio2/5 and sprom_dout */
-#define BCMA_CHIPCTL_4331_OVR_PIPEAUXCLKEN	BIT(8)	/* override core control on pipe_AuxClkEnable */
-#define BCMA_CHIPCTL_4331_OVR_PIPEAUXPWRDOWN	BIT(9)	/* override core control on pipe_AuxPowerDown */
-#define BCMA_CHIPCTL_4331_PCIE_AUXCLKEN		BIT(10)	/* pcie_auxclkenable */
-#define BCMA_CHIPCTL_4331_PCIE_PIPE_PLLDOWN	BIT(11)	/* pcie_pipe_pllpowerdown */
-#define BCMA_CHIPCTL_4331_BT_SHD0_ON_GPIO4	BIT(16)	/* enable bt_shd0 at gpio4 */
-#define BCMA_CHIPCTL_4331_BT_SHD1_ON_GPIO5	BIT(17)	/* enable bt_shd1 at gpio5 */
-
-/* Data for the PMU, if available.
- * Check availability with ((struct bcma_chipcommon)->capabilities & BCMA_CC_CAP_PMU)
- */
-struct bcma_chipcommon_pmu {
-	u8 rev;			/* PMU revision */
-	u32 crystalfreq;	/* The active crystal frequency (in kHz) */
-};
-
-#ifdef CONFIG_BCMA_DRIVER_MIPS
-struct bcma_pflash {
-	u8 buswidth;
-	u32 window;
-	u32 window_size;
-};
-
-struct bcma_serial_port {
-	void *regs;
-	unsigned long clockspeed;
-	unsigned int irq;
-	unsigned int baud_base;
-	unsigned int reg_shift;
-};
-#endif /* CONFIG_BCMA_DRIVER_MIPS */
-
-struct bcma_drv_cc {
-	struct bcma_device *core;
-	u32 status;
-	u32 capabilities;
-	u32 capabilities_ext;
-	u8 setup_done:1;
-	/* Fast Powerup Delay constant */
-	u16 fast_pwrup_delay;
-	struct bcma_chipcommon_pmu pmu;
-#ifdef CONFIG_BCMA_DRIVER_MIPS
-	struct bcma_pflash pflash;
-
-	int nr_serial_ports;
-	struct bcma_serial_port serial_ports[4];
-#endif /* CONFIG_BCMA_DRIVER_MIPS */
-};
-
-/* Register access */
-#define bcma_cc_read32(cc, offset) \
-	bcma_read32((cc)->core, offset)
-#define bcma_cc_write32(cc, offset, val) \
-	bcma_write32((cc)->core, offset, val)
-
-#define bcma_cc_mask32(cc, offset, mask) \
-	bcma_cc_write32(cc, offset, bcma_cc_read32(cc, offset) & (mask))
-#define bcma_cc_set32(cc, offset, set) \
-	bcma_cc_write32(cc, offset, bcma_cc_read32(cc, offset) | (set))
-#define bcma_cc_maskset32(cc, offset, mask, set) \
-	bcma_cc_write32(cc, offset, (bcma_cc_read32(cc, offset) & (mask)) | (set))
-
-extern void bcma_core_chipcommon_init(struct bcma_drv_cc *cc);
-
-extern void bcma_chipco_suspend(struct bcma_drv_cc *cc);
-extern void bcma_chipco_resume(struct bcma_drv_cc *cc);
-
-void bcma_chipco_bcm4331_ext_pa_lines_ctl(struct bcma_drv_cc *cc, bool enable);
-
-extern void bcma_chipco_watchdog_timer_set(struct bcma_drv_cc *cc,
-					  u32 ticks);
-
-void bcma_chipco_irq_mask(struct bcma_drv_cc *cc, u32 mask, u32 value);
-
-u32 bcma_chipco_irq_status(struct bcma_drv_cc *cc, u32 mask);
-
-/* Chipcommon GPIO pin access. */
-u32 bcma_chipco_gpio_in(struct bcma_drv_cc *cc, u32 mask);
-u32 bcma_chipco_gpio_out(struct bcma_drv_cc *cc, u32 mask, u32 value);
-u32 bcma_chipco_gpio_outen(struct bcma_drv_cc *cc, u32 mask, u32 value);
-u32 bcma_chipco_gpio_control(struct bcma_drv_cc *cc, u32 mask, u32 value);
-u32 bcma_chipco_gpio_intmask(struct bcma_drv_cc *cc, u32 mask, u32 value);
-u32 bcma_chipco_gpio_polarity(struct bcma_drv_cc *cc, u32 mask, u32 value);
-
-/* PMU support */
-extern void bcma_pmu_init(struct bcma_drv_cc *cc);
-
-extern void bcma_chipco_pll_write(struct bcma_drv_cc *cc, u32 offset,
-				  u32 value);
-extern void bcma_chipco_pll_maskset(struct bcma_drv_cc *cc, u32 offset,
-				    u32 mask, u32 set);
-extern void bcma_chipco_chipctl_maskset(struct bcma_drv_cc *cc,
-					u32 offset, u32 mask, u32 set);
-extern void bcma_chipco_regctl_maskset(struct bcma_drv_cc *cc,
-				       u32 offset, u32 mask, u32 set);
-
-#endif /* LINUX_BCMA_DRIVER_CC_H_ */
diff --git a/ANDROID_3.4.5/include/linux/bcma/bcma_driver_mips.h b/ANDROID_3.4.5/include/linux/bcma/bcma_driver_mips.h
deleted file mode 100644
index c0043645..00000000
--- a/ANDROID_3.4.5/include/linux/bcma/bcma_driver_mips.h
+++ /dev/null
@@ -1,51 +0,0 @@
-#ifndef LINUX_BCMA_DRIVER_MIPS_H_
-#define LINUX_BCMA_DRIVER_MIPS_H_
-
-#define BCMA_MIPS_IPSFLAG		0x0F08
-/* which sbflags get routed to mips interrupt 1 */
-#define  BCMA_MIPS_IPSFLAG_IRQ1		0x0000003F
-#define  BCMA_MIPS_IPSFLAG_IRQ1_SHIFT	0
-/* which sbflags get routed to mips interrupt 2 */
-#define  BCMA_MIPS_IPSFLAG_IRQ2		0x00003F00
-#define  BCMA_MIPS_IPSFLAG_IRQ2_SHIFT	8
-/* which sbflags get routed to mips interrupt 3 */
-#define  BCMA_MIPS_IPSFLAG_IRQ3		0x003F0000
-#define  BCMA_MIPS_IPSFLAG_IRQ3_SHIFT	16
-/* which sbflags get routed to mips interrupt 4 */
-#define  BCMA_MIPS_IPSFLAG_IRQ4		0x3F000000
-#define  BCMA_MIPS_IPSFLAG_IRQ4_SHIFT	24
-
-/* MIPS 74K core registers */
-#define BCMA_MIPS_MIPS74K_CORECTL	0x0000
-#define BCMA_MIPS_MIPS74K_EXCEPTBASE	0x0004
-#define BCMA_MIPS_MIPS74K_BIST		0x000C
-#define BCMA_MIPS_MIPS74K_INTMASK_INT0	0x0014
-#define BCMA_MIPS_MIPS74K_INTMASK(int) \
-	((int) * 4 + BCMA_MIPS_MIPS74K_INTMASK_INT0)
-#define BCMA_MIPS_MIPS74K_NMIMASK	0x002C
-#define BCMA_MIPS_MIPS74K_GPIOSEL	0x0040
-#define BCMA_MIPS_MIPS74K_GPIOOUT	0x0044
-#define BCMA_MIPS_MIPS74K_GPIOEN	0x0048
-#define BCMA_MIPS_MIPS74K_CLKCTLST	0x01E0
-
-#define BCMA_MIPS_OOBSELOUTA30		0x100
-
-struct bcma_device;
-
-struct bcma_drv_mips {
-	struct bcma_device *core;
-	u8 setup_done:1;
-	unsigned int assigned_irqs;
-};
-
-#ifdef CONFIG_BCMA_DRIVER_MIPS
-extern void bcma_core_mips_init(struct bcma_drv_mips *mcore);
-#else
-static inline void bcma_core_mips_init(struct bcma_drv_mips *mcore) { }
-#endif
-
-extern u32 bcma_cpu_clock(struct bcma_drv_mips *mcore);
-
-extern unsigned int bcma_core_mips_irq(struct bcma_device *dev);
-
-#endif /* LINUX_BCMA_DRIVER_MIPS_H_ */
diff --git a/ANDROID_3.4.5/include/linux/bcma/bcma_driver_pci.h b/ANDROID_3.4.5/include/linux/bcma/bcma_driver_pci.h
deleted file mode 100644
index 46c71e27..00000000
--- a/ANDROID_3.4.5/include/linux/bcma/bcma_driver_pci.h
+++ /dev/null
@@ -1,214 +0,0 @@
-#ifndef LINUX_BCMA_DRIVER_PCI_H_
-#define LINUX_BCMA_DRIVER_PCI_H_
-
-#include <linux/types.h>
-
-struct pci_dev;
-
-/** PCI core registers. **/
-#define BCMA_CORE_PCI_CTL			0x0000	/* PCI Control */
-#define  BCMA_CORE_PCI_CTL_RST_OE		0x00000001 /* PCI_RESET Output Enable */
-#define  BCMA_CORE_PCI_CTL_RST			0x00000002 /* PCI_RESET driven out to pin */
-#define  BCMA_CORE_PCI_CTL_CLK_OE		0x00000004 /* Clock gate Output Enable */
-#define  BCMA_CORE_PCI_CTL_CLK			0x00000008 /* Gate for clock driven out to pin */
-#define BCMA_CORE_PCI_ARBCTL			0x0010	/* PCI Arbiter Control */
-#define  BCMA_CORE_PCI_ARBCTL_INTERN		0x00000001 /* Use internal arbiter */
-#define  BCMA_CORE_PCI_ARBCTL_EXTERN		0x00000002 /* Use external arbiter */
-#define  BCMA_CORE_PCI_ARBCTL_PARKID		0x00000006 /* Mask, selects which agent is parked on an idle bus */
-#define   BCMA_CORE_PCI_ARBCTL_PARKID_LAST	0x00000000 /* Last requestor */
-#define   BCMA_CORE_PCI_ARBCTL_PARKID_4710	0x00000002 /* 4710 */
-#define   BCMA_CORE_PCI_ARBCTL_PARKID_EXT0	0x00000004 /* External requestor 0 */
-#define   BCMA_CORE_PCI_ARBCTL_PARKID_EXT1	0x00000006 /* External requestor 1 */
-#define BCMA_CORE_PCI_ISTAT			0x0020	/* Interrupt status */
-#define  BCMA_CORE_PCI_ISTAT_INTA		0x00000001 /* PCI INTA# */
-#define  BCMA_CORE_PCI_ISTAT_INTB		0x00000002 /* PCI INTB# */
-#define  BCMA_CORE_PCI_ISTAT_SERR		0x00000004 /* PCI SERR# (write to clear) */
-#define  BCMA_CORE_PCI_ISTAT_PERR		0x00000008 /* PCI PERR# (write to clear) */
-#define  BCMA_CORE_PCI_ISTAT_PME		0x00000010 /* PCI PME# */
-#define BCMA_CORE_PCI_IMASK			0x0024	/* Interrupt mask */
-#define  BCMA_CORE_PCI_IMASK_INTA		0x00000001 /* PCI INTA# */
-#define  BCMA_CORE_PCI_IMASK_INTB		0x00000002 /* PCI INTB# */
-#define  BCMA_CORE_PCI_IMASK_SERR		0x00000004 /* PCI SERR# */
-#define  BCMA_CORE_PCI_IMASK_PERR		0x00000008 /* PCI PERR# */
-#define  BCMA_CORE_PCI_IMASK_PME		0x00000010 /* PCI PME# */
-#define BCMA_CORE_PCI_MBOX			0x0028	/* Backplane to PCI Mailbox */
-#define  BCMA_CORE_PCI_MBOX_F0_0		0x00000100 /* PCI function 0, INT 0 */
-#define  BCMA_CORE_PCI_MBOX_F0_1		0x00000200 /* PCI function 0, INT 1 */
-#define  BCMA_CORE_PCI_MBOX_F1_0		0x00000400 /* PCI function 1, INT 0 */
-#define  BCMA_CORE_PCI_MBOX_F1_1		0x00000800 /* PCI function 1, INT 1 */
-#define  BCMA_CORE_PCI_MBOX_F2_0		0x00001000 /* PCI function 2, INT 0 */
-#define  BCMA_CORE_PCI_MBOX_F2_1		0x00002000 /* PCI function 2, INT 1 */
-#define  BCMA_CORE_PCI_MBOX_F3_0		0x00004000 /* PCI function 3, INT 0 */
-#define  BCMA_CORE_PCI_MBOX_F3_1		0x00008000 /* PCI function 3, INT 1 */
-#define BCMA_CORE_PCI_BCAST_ADDR		0x0050	/* Backplane Broadcast Address */
-#define  BCMA_CORE_PCI_BCAST_ADDR_MASK		0x000000FF
-#define BCMA_CORE_PCI_BCAST_DATA		0x0054	/* Backplane Broadcast Data */
-#define BCMA_CORE_PCI_GPIO_IN			0x0060	/* rev >= 2 only */
-#define BCMA_CORE_PCI_GPIO_OUT			0x0064	/* rev >= 2 only */
-#define BCMA_CORE_PCI_GPIO_ENABLE		0x0068	/* rev >= 2 only */
-#define BCMA_CORE_PCI_GPIO_CTL			0x006C	/* rev >= 2 only */
-#define BCMA_CORE_PCI_SBTOPCI0			0x0100	/* Backplane to PCI translation 0 (sbtopci0) */
-#define  BCMA_CORE_PCI_SBTOPCI0_MASK		0xFC000000
-#define BCMA_CORE_PCI_SBTOPCI1			0x0104	/* Backplane to PCI translation 1 (sbtopci1) */
-#define  BCMA_CORE_PCI_SBTOPCI1_MASK		0xFC000000
-#define BCMA_CORE_PCI_SBTOPCI2			0x0108	/* Backplane to PCI translation 2 (sbtopci2) */
-#define  BCMA_CORE_PCI_SBTOPCI2_MASK		0xC0000000
-#define BCMA_CORE_PCI_CONFIG_ADDR		0x0120	/* pcie config space access */
-#define BCMA_CORE_PCI_CONFIG_DATA		0x0124	/* pcie config space access */
-#define BCMA_CORE_PCI_MDIO_CONTROL		0x0128	/* controls the mdio access */
-#define  BCMA_CORE_PCI_MDIOCTL_DIVISOR_MASK	0x7f	/* clock to be used on MDIO */
-#define  BCMA_CORE_PCI_MDIOCTL_DIVISOR_VAL	0x2
-#define  BCMA_CORE_PCI_MDIOCTL_PREAM_EN		0x80	/* Enable preamble sequnce */
-#define  BCMA_CORE_PCI_MDIOCTL_ACCESS_DONE	0x100	/* Tranaction complete */
-#define BCMA_CORE_PCI_MDIO_DATA			0x012c	/* Data to the mdio access */
-#define  BCMA_CORE_PCI_MDIODATA_MASK		0x0000ffff /* data 2 bytes */
-#define  BCMA_CORE_PCI_MDIODATA_TA		0x00020000 /* Turnaround */
-#define  BCMA_CORE_PCI_MDIODATA_REGADDR_SHF_OLD	18	/* Regaddr shift (rev < 10) */
-#define  BCMA_CORE_PCI_MDIODATA_REGADDR_MASK_OLD	0x003c0000 /* Regaddr Mask (rev < 10) */
-#define  BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF_OLD	22	/* Physmedia devaddr shift (rev < 10) */
-#define  BCMA_CORE_PCI_MDIODATA_DEVADDR_MASK_OLD	0x0fc00000 /* Physmedia devaddr Mask (rev < 10) */
-#define  BCMA_CORE_PCI_MDIODATA_REGADDR_SHF	18	/* Regaddr shift */
-#define  BCMA_CORE_PCI_MDIODATA_REGADDR_MASK	0x007c0000 /* Regaddr Mask */
-#define  BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF	23	/* Physmedia devaddr shift */
-#define  BCMA_CORE_PCI_MDIODATA_DEVADDR_MASK	0x0f800000 /* Physmedia devaddr Mask */
-#define  BCMA_CORE_PCI_MDIODATA_WRITE		0x10000000 /* write Transaction */
-#define  BCMA_CORE_PCI_MDIODATA_READ		0x20000000 /* Read Transaction */
-#define  BCMA_CORE_PCI_MDIODATA_START		0x40000000 /* start of Transaction */
-#define  BCMA_CORE_PCI_MDIODATA_DEV_ADDR	0x0	/* dev address for serdes */
-#define  BCMA_CORE_PCI_MDIODATA_BLK_ADDR	0x1F	/* blk address for serdes */
-#define  BCMA_CORE_PCI_MDIODATA_DEV_PLL		0x1d	/* SERDES PLL Dev */
-#define  BCMA_CORE_PCI_MDIODATA_DEV_TX		0x1e	/* SERDES TX Dev */
-#define  BCMA_CORE_PCI_MDIODATA_DEV_RX		0x1f	/* SERDES RX Dev */
-#define BCMA_CORE_PCI_PCIEIND_ADDR		0x0130	/* indirect access to the internal register */
-#define BCMA_CORE_PCI_PCIEIND_DATA		0x0134	/* Data to/from the internal regsiter */
-#define BCMA_CORE_PCI_CLKREQENCTRL		0x0138	/*  >= rev 6, Clkreq rdma control */
-#define BCMA_CORE_PCI_PCICFG0			0x0400	/* PCI config space 0 (rev >= 8) */
-#define BCMA_CORE_PCI_PCICFG1			0x0500	/* PCI config space 1 (rev >= 8) */
-#define BCMA_CORE_PCI_PCICFG2			0x0600	/* PCI config space 2 (rev >= 8) */
-#define BCMA_CORE_PCI_PCICFG3			0x0700	/* PCI config space 3 (rev >= 8) */
-#define BCMA_CORE_PCI_SPROM(wordoffset)		(0x0800 + ((wordoffset) * 2)) /* SPROM shadow area (72 bytes) */
-
-/* SBtoPCIx */
-#define BCMA_CORE_PCI_SBTOPCI_MEM		0x00000000
-#define BCMA_CORE_PCI_SBTOPCI_IO		0x00000001
-#define BCMA_CORE_PCI_SBTOPCI_CFG0		0x00000002
-#define BCMA_CORE_PCI_SBTOPCI_CFG1		0x00000003
-#define BCMA_CORE_PCI_SBTOPCI_PREF		0x00000004 /* Prefetch enable */
-#define BCMA_CORE_PCI_SBTOPCI_BURST		0x00000008 /* Burst enable */
-#define BCMA_CORE_PCI_SBTOPCI_MRM		0x00000020 /* Memory Read Multiple */
-#define BCMA_CORE_PCI_SBTOPCI_RC		0x00000030 /* Read Command mask (rev >= 11) */
-#define  BCMA_CORE_PCI_SBTOPCI_RC_READ		0x00000000 /* Memory read */
-#define  BCMA_CORE_PCI_SBTOPCI_RC_READL		0x00000010 /* Memory read line */
-#define  BCMA_CORE_PCI_SBTOPCI_RC_READM		0x00000020 /* Memory read multiple */
-
-/* PCIE protocol PHY diagnostic registers */
-#define BCMA_CORE_PCI_PLP_MODEREG		0x200	/* Mode */
-#define BCMA_CORE_PCI_PLP_STATUSREG		0x204	/* Status */
-#define  BCMA_CORE_PCI_PLP_POLARITYINV_STAT	0x10	/* Status reg PCIE_PLP_STATUSREG */
-#define BCMA_CORE_PCI_PLP_LTSSMCTRLREG		0x208	/* LTSSM control */
-#define BCMA_CORE_PCI_PLP_LTLINKNUMREG		0x20c	/* Link Training Link number */
-#define BCMA_CORE_PCI_PLP_LTLANENUMREG		0x210	/* Link Training Lane number */
-#define BCMA_CORE_PCI_PLP_LTNFTSREG		0x214	/* Link Training N_FTS */
-#define BCMA_CORE_PCI_PLP_ATTNREG		0x218	/* Attention */
-#define BCMA_CORE_PCI_PLP_ATTNMASKREG		0x21C	/* Attention Mask */
-#define BCMA_CORE_PCI_PLP_RXERRCTR		0x220	/* Rx Error */
-#define BCMA_CORE_PCI_PLP_RXFRMERRCTR		0x224	/* Rx Framing Error */
-#define BCMA_CORE_PCI_PLP_RXERRTHRESHREG	0x228	/* Rx Error threshold */
-#define BCMA_CORE_PCI_PLP_TESTCTRLREG		0x22C	/* Test Control reg */
-#define BCMA_CORE_PCI_PLP_SERDESCTRLOVRDREG	0x230	/* SERDES Control Override */
-#define BCMA_CORE_PCI_PLP_TIMINGOVRDREG		0x234	/* Timing param override */
-#define BCMA_CORE_PCI_PLP_RXTXSMDIAGREG		0x238	/* RXTX State Machine Diag */
-#define BCMA_CORE_PCI_PLP_LTSSMDIAGREG		0x23C	/* LTSSM State Machine Diag */
-
-/* PCIE protocol DLLP diagnostic registers */
-#define BCMA_CORE_PCI_DLLP_LCREG		0x100	/* Link Control */
-#define BCMA_CORE_PCI_DLLP_LSREG		0x104	/* Link Status */
-#define BCMA_CORE_PCI_DLLP_LAREG		0x108	/* Link Attention */
-#define  BCMA_CORE_PCI_DLLP_LSREG_LINKUP	(1 << 16)
-#define BCMA_CORE_PCI_DLLP_LAMASKREG		0x10C	/* Link Attention Mask */
-#define BCMA_CORE_PCI_DLLP_NEXTTXSEQNUMREG	0x110	/* Next Tx Seq Num */
-#define BCMA_CORE_PCI_DLLP_ACKEDTXSEQNUMREG	0x114	/* Acked Tx Seq Num */
-#define BCMA_CORE_PCI_DLLP_PURGEDTXSEQNUMREG	0x118	/* Purged Tx Seq Num */
-#define BCMA_CORE_PCI_DLLP_RXSEQNUMREG		0x11C	/* Rx Sequence Number */
-#define BCMA_CORE_PCI_DLLP_LRREG		0x120	/* Link Replay */
-#define BCMA_CORE_PCI_DLLP_LACKTOREG		0x124	/* Link Ack Timeout */
-#define BCMA_CORE_PCI_DLLP_PMTHRESHREG		0x128	/* Power Management Threshold */
-#define BCMA_CORE_PCI_DLLP_RTRYWPREG		0x12C	/* Retry buffer write ptr */
-#define BCMA_CORE_PCI_DLLP_RTRYRPREG		0x130	/* Retry buffer Read ptr */
-#define BCMA_CORE_PCI_DLLP_RTRYPPREG		0x134	/* Retry buffer Purged ptr */
-#define BCMA_CORE_PCI_DLLP_RTRRWREG		0x138	/* Retry buffer Read/Write */
-#define BCMA_CORE_PCI_DLLP_ECTHRESHREG		0x13C	/* Error Count Threshold */
-#define BCMA_CORE_PCI_DLLP_TLPERRCTRREG		0x140	/* TLP Error Counter */
-#define BCMA_CORE_PCI_DLLP_ERRCTRREG		0x144	/* Error Counter */
-#define BCMA_CORE_PCI_DLLP_NAKRXCTRREG		0x148	/* NAK Received Counter */
-#define BCMA_CORE_PCI_DLLP_TESTREG		0x14C	/* Test */
-#define BCMA_CORE_PCI_DLLP_PKTBIST		0x150	/* Packet BIST */
-#define BCMA_CORE_PCI_DLLP_PCIE11		0x154	/* DLLP PCIE 1.1 reg */
-
-/* SERDES RX registers */
-#define BCMA_CORE_PCI_SERDES_RX_CTRL		1	/* Rx cntrl */
-#define  BCMA_CORE_PCI_SERDES_RX_CTRL_FORCE	0x80	/* rxpolarity_force */
-#define  BCMA_CORE_PCI_SERDES_RX_CTRL_POLARITY	0x40	/* rxpolarity_value */
-#define BCMA_CORE_PCI_SERDES_RX_TIMER1		2	/* Rx Timer1 */
-#define BCMA_CORE_PCI_SERDES_RX_CDR		6	/* CDR */
-#define BCMA_CORE_PCI_SERDES_RX_CDRBW		7	/* CDR BW */
-
-/* SERDES PLL registers */
-#define BCMA_CORE_PCI_SERDES_PLL_CTRL		1	/* PLL control reg */
-#define BCMA_CORE_PCI_PLL_CTRL_FREQDET_EN	0x4000	/* bit 14 is FREQDET on */
-
-/* PCIcore specific boardflags */
-#define BCMA_CORE_PCI_BFL_NOPCI			0x00000400 /* Board leaves PCI floating */
-
-/* PCIE Config space accessing MACROS */
-#define BCMA_CORE_PCI_CFG_BUS_SHIFT		24	/* Bus shift */
-#define BCMA_CORE_PCI_CFG_SLOT_SHIFT		19	/* Slot/Device shift */
-#define BCMA_CORE_PCI_CFG_FUN_SHIFT		16	/* Function shift */
-#define BCMA_CORE_PCI_CFG_OFF_SHIFT		0	/* Register shift */
-
-#define BCMA_CORE_PCI_CFG_BUS_MASK		0xff	/* Bus mask */
-#define BCMA_CORE_PCI_CFG_SLOT_MASK		0x1f	/* Slot/Device mask */
-#define BCMA_CORE_PCI_CFG_FUN_MASK		7	/* Function mask */
-#define BCMA_CORE_PCI_CFG_OFF_MASK		0xfff	/* Register mask */
-
-/* PCIE Root Capability Register bits (Host mode only) */
-#define BCMA_CORE_PCI_RC_CRS_VISIBILITY		0x0001
-
-struct bcma_drv_pci;
-
-#ifdef CONFIG_BCMA_DRIVER_PCI_HOSTMODE
-struct bcma_drv_pci_host {
-	struct bcma_drv_pci *pdev;
-
-	u32 host_cfg_addr;
-	spinlock_t cfgspace_lock;
-
-	struct pci_controller pci_controller;
-	struct pci_ops pci_ops;
-	struct resource mem_resource;
-	struct resource io_resource;
-};
-#endif
-
-struct bcma_drv_pci {
-	struct bcma_device *core;
-	u8 setup_done:1;
-	u8 hostmode:1;
-
-#ifdef CONFIG_BCMA_DRIVER_PCI_HOSTMODE
-	struct bcma_drv_pci_host *host_controller;
-#endif
-};
-
-/* Register access */
-#define pcicore_read32(pc, offset)		bcma_read32((pc)->core, offset)
-#define pcicore_write32(pc, offset, val)	bcma_write32((pc)->core, offset, val)
-
-extern void __devinit bcma_core_pci_init(struct bcma_drv_pci *pc);
-extern int bcma_core_pci_irq_ctl(struct bcma_drv_pci *pc,
-				 struct bcma_device *core, bool enable);
-
-extern int bcma_core_pci_pcibios_map_irq(const struct pci_dev *dev);
-extern int bcma_core_pci_plat_dev_init(struct pci_dev *dev);
-
-#endif /* LINUX_BCMA_DRIVER_PCI_H_ */
diff --git a/ANDROID_3.4.5/include/linux/bcma/bcma_regs.h b/ANDROID_3.4.5/include/linux/bcma/bcma_regs.h
deleted file mode 100644
index 5a71d571..00000000
--- a/ANDROID_3.4.5/include/linux/bcma/bcma_regs.h
+++ /dev/null
@@ -1,86 +0,0 @@
-#ifndef LINUX_BCMA_REGS_H_
-#define LINUX_BCMA_REGS_H_
-
-/* Some single registers are shared between many cores */
-/* BCMA_CLKCTLST: ChipCommon (rev >= 20), PCIe, 80211 */
-#define BCMA_CLKCTLST			0x01E0 /* Clock control and status */
-#define  BCMA_CLKCTLST_FORCEALP		0x00000001 /* Force ALP request */
-#define  BCMA_CLKCTLST_FORCEHT		0x00000002 /* Force HT request */
-#define  BCMA_CLKCTLST_FORCEILP		0x00000004 /* Force ILP request */
-#define  BCMA_CLKCTLST_HAVEALPREQ	0x00000008 /* ALP available request */
-#define  BCMA_CLKCTLST_HAVEHTREQ	0x00000010 /* HT available request */
-#define  BCMA_CLKCTLST_HWCROFF		0x00000020 /* Force HW clock request off */
-#define  BCMA_CLKCTLST_EXTRESREQ	0x00000700 /* Mask of external resource requests */
-#define  BCMA_CLKCTLST_HAVEALP		0x00010000 /* ALP available */
-#define  BCMA_CLKCTLST_HAVEHT		0x00020000 /* HT available */
-#define  BCMA_CLKCTLST_BP_ON_ALP	0x00040000 /* RO: running on ALP clock */
-#define  BCMA_CLKCTLST_BP_ON_HT		0x00080000 /* RO: running on HT clock */
-#define  BCMA_CLKCTLST_EXTRESST		0x07000000 /* Mask of external resource status */
-/* Is there any BCM4328 on BCMA bus? */
-#define  BCMA_CLKCTLST_4328A0_HAVEHT	0x00010000 /* 4328a0 has reversed bits */
-#define  BCMA_CLKCTLST_4328A0_HAVEALP	0x00020000 /* 4328a0 has reversed bits */
-
-/* Agent registers (common for every core) */
-#define BCMA_IOCTL			0x0408 /* IO control */
-#define  BCMA_IOCTL_CLK			0x0001
-#define  BCMA_IOCTL_FGC			0x0002
-#define  BCMA_IOCTL_CORE_BITS		0x3FFC
-#define  BCMA_IOCTL_PME_EN		0x4000
-#define  BCMA_IOCTL_BIST_EN		0x8000
-#define BCMA_IOST			0x0500 /* IO status */
-#define  BCMA_IOST_CORE_BITS		0x0FFF
-#define  BCMA_IOST_DMA64		0x1000
-#define  BCMA_IOST_GATED_CLK		0x2000
-#define  BCMA_IOST_BIST_ERROR		0x4000
-#define  BCMA_IOST_BIST_DONE		0x8000
-#define BCMA_RESET_CTL			0x0800
-#define  BCMA_RESET_CTL_RESET		0x0001
-
-/* BCMA PCI config space registers. */
-#define BCMA_PCI_PMCSR			0x44
-#define  BCMA_PCI_PE			0x100
-#define BCMA_PCI_BAR0_WIN		0x80	/* Backplane address space 0 */
-#define BCMA_PCI_BAR1_WIN		0x84	/* Backplane address space 1 */
-#define BCMA_PCI_SPROMCTL		0x88	/* SPROM control */
-#define  BCMA_PCI_SPROMCTL_WE		0x10	/* SPROM write enable */
-#define BCMA_PCI_BAR1_CONTROL		0x8c	/* Address space 1 burst control */
-#define BCMA_PCI_IRQS			0x90	/* PCI interrupts */
-#define BCMA_PCI_IRQMASK		0x94	/* PCI IRQ control and mask (pcirev >= 6 only) */
-#define BCMA_PCI_BACKPLANE_IRQS		0x98	/* Backplane Interrupts */
-#define BCMA_PCI_BAR0_WIN2		0xAC
-#define BCMA_PCI_GPIO_IN		0xB0	/* GPIO Input (pcirev >= 3 only) */
-#define BCMA_PCI_GPIO_OUT		0xB4	/* GPIO Output (pcirev >= 3 only) */
-#define BCMA_PCI_GPIO_OUT_ENABLE	0xB8	/* GPIO Output Enable/Disable (pcirev >= 3 only) */
-#define  BCMA_PCI_GPIO_SCS		0x10	/* PCI config space bit 4 for 4306c0 slow clock source */
-#define  BCMA_PCI_GPIO_HWRAD		0x20	/* PCI config space GPIO 13 for hw radio disable */
-#define  BCMA_PCI_GPIO_XTAL		0x40	/* PCI config space GPIO 14 for Xtal powerup */
-#define  BCMA_PCI_GPIO_PLL		0x80	/* PCI config space GPIO 15 for PLL powerdown */
-
-/* SiliconBackplane Address Map.
- * All regions may not exist on all chips.
- */
-#define BCMA_SOC_SDRAM_BASE		0x00000000U	/* Physical SDRAM */
-#define BCMA_SOC_PCI_MEM		0x08000000U	/* Host Mode sb2pcitranslation0 (64 MB) */
-#define BCMA_SOC_PCI_MEM_SZ		(64 * 1024 * 1024)
-#define BCMA_SOC_PCI_CFG		0x0c000000U	/* Host Mode sb2pcitranslation1 (64 MB) */
-#define BCMA_SOC_SDRAM_SWAPPED		0x10000000U	/* Byteswapped Physical SDRAM */
-#define BCMA_SOC_SDRAM_R2		0x80000000U	/* Region 2 for sdram (512 MB) */
-
-
-#define BCMA_SOC_PCI_DMA		0x40000000U	/* Client Mode sb2pcitranslation2 (1 GB) */
-#define BCMA_SOC_PCI_DMA2		0x80000000U	/* Client Mode sb2pcitranslation2 (1 GB) */
-#define BCMA_SOC_PCI_DMA_SZ		0x40000000U	/* Client Mode sb2pcitranslation2 size in bytes */
-#define BCMA_SOC_PCIE_DMA_L32		0x00000000U	/* PCIE Client Mode sb2pcitranslation2
-							 * (2 ZettaBytes), low 32 bits
-							 */
-#define BCMA_SOC_PCIE_DMA_H32		0x80000000U	/* PCIE Client Mode sb2pcitranslation2
-							 * (2 ZettaBytes), high 32 bits
-							 */
-
-#define BCMA_SOC_PCI1_MEM		0x40000000U	/* Host Mode sb2pcitranslation0 (64 MB) */
-#define BCMA_SOC_PCI1_CFG		0x44000000U	/* Host Mode sb2pcitranslation1 (64 MB) */
-#define BCMA_SOC_PCIE1_DMA_H32		0xc0000000U	/* PCIE Client Mode sb2pcitranslation2
-							 * (2 ZettaBytes), high 32 bits
-							 */
-
-#endif /* LINUX_BCMA_REGS_H_ */
diff --git a/ANDROID_3.4.5/include/linux/bcma/bcma_soc.h b/ANDROID_3.4.5/include/linux/bcma/bcma_soc.h
deleted file mode 100644
index 4203c559..00000000
--- a/ANDROID_3.4.5/include/linux/bcma/bcma_soc.h
+++ /dev/null
@@ -1,16 +0,0 @@
-#ifndef LINUX_BCMA_SOC_H_
-#define LINUX_BCMA_SOC_H_
-
-#include <linux/bcma/bcma.h>
-
-struct bcma_soc {
-	struct bcma_bus bus;
-	struct bcma_device core_cc;
-	struct bcma_device core_mips;
-};
-
-int __init bcma_host_soc_register(struct bcma_soc *soc);
-
-int bcma_bus_register(struct bcma_bus *bus);
-
-#endif /* LINUX_BCMA_SOC_H_ */
diff --git a/ANDROID_3.4.5/include/linux/bfin_mac.h b/ANDROID_3.4.5/include/linux/bfin_mac.h
deleted file mode 100644
index a69554ef..00000000
--- a/ANDROID_3.4.5/include/linux/bfin_mac.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
- * Blackfin On-Chip MAC Driver
- *
- * Copyright 2004-2010 Analog Devices Inc.
- *
- * Enter bugs at http://blackfin.uclinux.org/
- *
- * Licensed under the GPL-2 or later.
- */
-
-#ifndef _LINUX_BFIN_MAC_H_
-#define _LINUX_BFIN_MAC_H_
-
-#include <linux/phy.h>
-
-struct bfin_phydev_platform_data {
-	unsigned short addr;
-	int irq;
-};
-
-struct bfin_mii_bus_platform_data {
-	int phydev_number;
-	struct bfin_phydev_platform_data *phydev_data;
-	const unsigned short *mac_peripherals;
-	int phy_mode;
-	unsigned int phy_mask;
-	unsigned short vlan1_mask, vlan2_mask;
-};
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/bfs_fs.h b/ANDROID_3.4.5/include/linux/bfs_fs.h
deleted file mode 100644
index 1c0b355a..00000000
--- a/ANDROID_3.4.5/include/linux/bfs_fs.h
+++ /dev/null
@@ -1,81 +0,0 @@
-/*
- *	include/linux/bfs_fs.h - BFS data structures on disk.
- *	Copyright (C) 1999 Tigran Aivazian <tigran@veritas.com>
- */
-
-#ifndef _LINUX_BFS_FS_H
-#define _LINUX_BFS_FS_H
-
-#include <linux/types.h>
-
-#define BFS_BSIZE_BITS		9
-#define BFS_BSIZE		(1<<BFS_BSIZE_BITS)
-
-#define BFS_MAGIC		0x1BADFACE
-#define BFS_ROOT_INO		2
-#define BFS_INODES_PER_BLOCK	8
-
-/* SVR4 vnode type values (bfs_inode->i_vtype) */
-#define BFS_VDIR 2L
-#define BFS_VREG 1L
-
-/* BFS inode layout on disk */
-struct bfs_inode {
-	__le16 i_ino;
-	__u16 i_unused;
-	__le32 i_sblock;
-	__le32 i_eblock;
-	__le32 i_eoffset;
-	__le32 i_vtype;
-	__le32 i_mode;
-	__le32 i_uid;
-	__le32 i_gid;
-	__le32 i_nlink;
-	__le32 i_atime;
-	__le32 i_mtime;
-	__le32 i_ctime;
-	__u32 i_padding[4];
-};
-
-#define BFS_NAMELEN		14	
-#define BFS_DIRENT_SIZE		16
-#define BFS_DIRS_PER_BLOCK	32
-
-struct bfs_dirent {
-	__le16 ino;
-	char name[BFS_NAMELEN];
-};
-
-/* BFS superblock layout on disk */
-struct bfs_super_block {
-	__le32 s_magic;
-	__le32 s_start;
-	__le32 s_end;
-	__le32 s_from;
-	__le32 s_to;
-	__s32 s_bfrom;
-	__s32 s_bto;
-	char  s_fsname[6];
-	char  s_volume[6];
-	__u32 s_padding[118];
-};
-
-
-#define BFS_OFF2INO(offset) \
-        ((((offset) - BFS_BSIZE) / sizeof(struct bfs_inode)) + BFS_ROOT_INO)
-
-#define BFS_INO2OFF(ino) \
-	((__u32)(((ino) - BFS_ROOT_INO) * sizeof(struct bfs_inode)) + BFS_BSIZE)
-#define BFS_NZFILESIZE(ip) \
-        ((le32_to_cpu((ip)->i_eoffset) + 1) -  le32_to_cpu((ip)->i_sblock) * BFS_BSIZE)
-
-#define BFS_FILESIZE(ip) \
-        ((ip)->i_sblock == 0 ? 0 : BFS_NZFILESIZE(ip))
-
-#define BFS_FILEBLOCKS(ip) \
-        ((ip)->i_sblock == 0 ? 0 : (le32_to_cpu((ip)->i_eblock) + 1) -  le32_to_cpu((ip)->i_sblock))
-#define BFS_UNCLEAN(bfs_sb, sb)	\
-	((le32_to_cpu(bfs_sb->s_from) != -1) && (le32_to_cpu(bfs_sb->s_to) != -1) && !(sb->s_flags & MS_RDONLY))
-
-
-#endif	/* _LINUX_BFS_FS_H */
diff --git a/ANDROID_3.4.5/include/linux/binfmts.h b/ANDROID_3.4.5/include/linux/binfmts.h
deleted file mode 100644
index 366422bc..00000000
--- a/ANDROID_3.4.5/include/linux/binfmts.h
+++ /dev/null
@@ -1,140 +0,0 @@
-#ifndef _LINUX_BINFMTS_H
-#define _LINUX_BINFMTS_H
-
-#include <linux/capability.h>
-
-struct pt_regs;
-
-/*
- * These are the maximum length and maximum number of strings passed to the
- * execve() system call.  MAX_ARG_STRLEN is essentially random but serves to
- * prevent the kernel from being unduly impacted by misaddressed pointers.
- * MAX_ARG_STRINGS is chosen to fit in a signed 32-bit integer.
- */
-#define MAX_ARG_STRLEN (PAGE_SIZE * 32)
-#define MAX_ARG_STRINGS 0x7FFFFFFF
-
-/* sizeof(linux_binprm->buf) */
-#define BINPRM_BUF_SIZE 128
-
-#ifdef __KERNEL__
-#include <linux/sched.h>
-
-#define CORENAME_MAX_SIZE 128
-
-/*
- * This structure is used to hold the arguments that are used when loading binaries.
- */
-struct linux_binprm {
-	char buf[BINPRM_BUF_SIZE];
-#ifdef CONFIG_MMU
-	struct vm_area_struct *vma;
-	unsigned long vma_pages;
-#else
-# define MAX_ARG_PAGES	32
-	struct page *page[MAX_ARG_PAGES];
-#endif
-	struct mm_struct *mm;
-	unsigned long p; /* current top of mem */
-	unsigned int
-		cred_prepared:1,/* true if creds already prepared (multiple
-				 * preps happen for interpreters) */
-		cap_effective:1;/* true if has elevated effective capabilities,
-				 * false if not; except for init which inherits
-				 * its parent's caps anyway */
-#ifdef __alpha__
-	unsigned int taso:1;
-#endif
-	unsigned int recursion_depth;
-	struct file * file;
-	struct cred *cred;	/* new credentials */
-	int unsafe;		/* how unsafe this exec is (mask of LSM_UNSAFE_*) */
-	unsigned int per_clear;	/* bits to clear in current->personality */
-	int argc, envc;
-	const char * filename;	/* Name of binary as seen by procps */
-	const char * interp;	/* Name of the binary really executed. Most
-				   of the time same as filename, but could be
-				   different for binfmt_{misc,script} */
-	unsigned interp_flags;
-	unsigned interp_data;
-	unsigned long loader, exec;
-	char tcomm[TASK_COMM_LEN];
-};
-
-#define BINPRM_FLAGS_ENFORCE_NONDUMP_BIT 0
-#define BINPRM_FLAGS_ENFORCE_NONDUMP (1 << BINPRM_FLAGS_ENFORCE_NONDUMP_BIT)
-
-/* fd of the binary should be passed to the interpreter */
-#define BINPRM_FLAGS_EXECFD_BIT 1
-#define BINPRM_FLAGS_EXECFD (1 << BINPRM_FLAGS_EXECFD_BIT)
-
-#define BINPRM_MAX_RECURSION 4
-
-/* Function parameter for binfmt->coredump */
-struct coredump_params {
-	long signr;
-	struct pt_regs *regs;
-	struct file *file;
-	unsigned long limit;
-	unsigned long mm_flags;
-};
-
-/*
- * This structure defines the functions that are used to load the binary formats that
- * linux accepts.
- */
-struct linux_binfmt {
-	struct list_head lh;
-	struct module *module;
-	int (*load_binary)(struct linux_binprm *, struct  pt_regs * regs);
-	int (*load_shlib)(struct file *);
-	int (*core_dump)(struct coredump_params *cprm);
-	unsigned long min_coredump;	/* minimal dump size */
-};
-
-extern void __register_binfmt(struct linux_binfmt *fmt, int insert);
-
-/* Registration of default binfmt handlers */
-static inline void register_binfmt(struct linux_binfmt *fmt)
-{
-	__register_binfmt(fmt, 0);
-}
-/* Same as above, but adds a new binfmt at the top of the list */
-static inline void insert_binfmt(struct linux_binfmt *fmt)
-{
-	__register_binfmt(fmt, 1);
-}
-
-extern void unregister_binfmt(struct linux_binfmt *);
-
-extern int prepare_binprm(struct linux_binprm *);
-extern int __must_check remove_arg_zero(struct linux_binprm *);
-extern int search_binary_handler(struct linux_binprm *, struct pt_regs *);
-extern int flush_old_exec(struct linux_binprm * bprm);
-extern void setup_new_exec(struct linux_binprm * bprm);
-extern void would_dump(struct linux_binprm *, struct file *);
-
-extern int suid_dumpable;
-#define SUID_DUMP_DISABLE	0	/* No setuid dumping */
-#define SUID_DUMP_USER		1	/* Dump as user of process */
-#define SUID_DUMP_ROOT		2	/* Dump as root */
-
-/* Stack area protections */
-#define EXSTACK_DEFAULT   0	/* Whatever the arch defaults to */
-#define EXSTACK_DISABLE_X 1	/* Disable executable stacks */
-#define EXSTACK_ENABLE_X  2	/* Enable executable stacks */
-
-extern int setup_arg_pages(struct linux_binprm * bprm,
-			   unsigned long stack_top,
-			   int executable_stack);
-extern int bprm_mm_init(struct linux_binprm *bprm);
-extern int copy_strings_kernel(int argc, const char *const *argv,
-			       struct linux_binprm *bprm);
-extern int prepare_bprm_creds(struct linux_binprm *bprm);
-extern void install_exec_creds(struct linux_binprm *bprm);
-extern void do_coredump(long signr, int exit_code, struct pt_regs *regs);
-extern void set_binfmt(struct linux_binfmt *new);
-extern void free_bprm(struct linux_binprm *);
-
-#endif /* __KERNEL__ */
-#endif /* _LINUX_BINFMTS_H */
diff --git a/ANDROID_3.4.5/include/linux/bio.h b/ANDROID_3.4.5/include/linux/bio.h
deleted file mode 100644
index 4d94eb8b..00000000
--- a/ANDROID_3.4.5/include/linux/bio.h
+++ /dev/null
@@ -1,581 +0,0 @@
-/*
- * 2.5 block I/O model
- *
- * Copyright (C) 2001 Jens Axboe <axboe@suse.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public Licens
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-
- */
-#ifndef __LINUX_BIO_H
-#define __LINUX_BIO_H
-
-#include <linux/highmem.h>
-#include <linux/mempool.h>
-#include <linux/ioprio.h>
-#include <linux/bug.h>
-
-#ifdef CONFIG_BLOCK
-
-#include <asm/io.h>
-
-/* struct bio, bio_vec and BIO_* flags are defined in blk_types.h */
-#include <linux/blk_types.h>
-
-#define BIO_DEBUG
-
-#ifdef BIO_DEBUG
-#define BIO_BUG_ON	BUG_ON
-#else
-#define BIO_BUG_ON
-#endif
-
-#define BIO_MAX_PAGES		256
-#define BIO_MAX_SIZE		(BIO_MAX_PAGES << PAGE_CACHE_SHIFT)
-#define BIO_MAX_SECTORS		(BIO_MAX_SIZE >> 9)
-
-/*
- * upper 16 bits of bi_rw define the io priority of this bio
- */
-#define BIO_PRIO_SHIFT	(8 * sizeof(unsigned long) - IOPRIO_BITS)
-#define bio_prio(bio)	((bio)->bi_rw >> BIO_PRIO_SHIFT)
-#define bio_prio_valid(bio)	ioprio_valid(bio_prio(bio))
-
-#define bio_set_prio(bio, prio)		do {			\
-	WARN_ON(prio >= (1 << IOPRIO_BITS));			\
-	(bio)->bi_rw &= ((1UL << BIO_PRIO_SHIFT) - 1);		\
-	(bio)->bi_rw |= ((unsigned long) (prio) << BIO_PRIO_SHIFT);	\
-} while (0)
-
-/*
- * various member access, note that bio_data should of course not be used
- * on highmem page vectors
- */
-#define bio_iovec_idx(bio, idx)	(&((bio)->bi_io_vec[(idx)]))
-#define bio_iovec(bio)		bio_iovec_idx((bio), (bio)->bi_idx)
-#define bio_page(bio)		bio_iovec((bio))->bv_page
-#define bio_offset(bio)		bio_iovec((bio))->bv_offset
-#define bio_segments(bio)	((bio)->bi_vcnt - (bio)->bi_idx)
-#define bio_sectors(bio)	((bio)->bi_size >> 9)
-
-static inline unsigned int bio_cur_bytes(struct bio *bio)
-{
-	if (bio->bi_vcnt)
-		return bio_iovec(bio)->bv_len;
-	else /* dataless requests such as discard */
-		return bio->bi_size;
-}
-
-static inline void *bio_data(struct bio *bio)
-{
-	if (bio->bi_vcnt)
-		return page_address(bio_page(bio)) + bio_offset(bio);
-
-	return NULL;
-}
-
-static inline int bio_has_allocated_vec(struct bio *bio)
-{
-	return bio->bi_io_vec && bio->bi_io_vec != bio->bi_inline_vecs;
-}
-
-/*
- * will die
- */
-#define bio_to_phys(bio)	(page_to_phys(bio_page((bio))) + (unsigned long) bio_offset((bio)))
-#define bvec_to_phys(bv)	(page_to_phys((bv)->bv_page) + (unsigned long) (bv)->bv_offset)
-
-/*
- * queues that have highmem support enabled may still need to revert to
- * PIO transfers occasionally and thus map high pages temporarily. For
- * permanent PIO fall back, user is probably better off disabling highmem
- * I/O completely on that queue (see ide-dma for example)
- */
-#define __bio_kmap_atomic(bio, idx, kmtype)				\
-	(kmap_atomic(bio_iovec_idx((bio), (idx))->bv_page) +	\
-		bio_iovec_idx((bio), (idx))->bv_offset)
-
-#define __bio_kunmap_atomic(addr, kmtype) kunmap_atomic(addr)
-
-/*
- * merge helpers etc
- */
-
-#define __BVEC_END(bio)		bio_iovec_idx((bio), (bio)->bi_vcnt - 1)
-#define __BVEC_START(bio)	bio_iovec_idx((bio), (bio)->bi_idx)
-
-/* Default implementation of BIOVEC_PHYS_MERGEABLE */
-#define __BIOVEC_PHYS_MERGEABLE(vec1, vec2)	\
-	((bvec_to_phys((vec1)) + (vec1)->bv_len) == bvec_to_phys((vec2)))
-
-/*
- * allow arch override, for eg virtualized architectures (put in asm/io.h)
- */
-#ifndef BIOVEC_PHYS_MERGEABLE
-#define BIOVEC_PHYS_MERGEABLE(vec1, vec2)	\
-	__BIOVEC_PHYS_MERGEABLE(vec1, vec2)
-#endif
-
-#define __BIO_SEG_BOUNDARY(addr1, addr2, mask) \
-	(((addr1) | (mask)) == (((addr2) - 1) | (mask)))
-#define BIOVEC_SEG_BOUNDARY(q, b1, b2) \
-	__BIO_SEG_BOUNDARY(bvec_to_phys((b1)), bvec_to_phys((b2)) + (b2)->bv_len, queue_segment_boundary((q)))
-#define BIO_SEG_BOUNDARY(q, b1, b2) \
-	BIOVEC_SEG_BOUNDARY((q), __BVEC_END((b1)), __BVEC_START((b2)))
-
-#define bio_io_error(bio) bio_endio((bio), -EIO)
-
-/*
- * drivers should not use the __ version unless they _really_ want to
- * run through the entire bio and not just pending pieces
- */
-#define __bio_for_each_segment(bvl, bio, i, start_idx)			\
-	for (bvl = bio_iovec_idx((bio), (start_idx)), i = (start_idx);	\
-	     i < (bio)->bi_vcnt;					\
-	     bvl++, i++)
-
-#define bio_for_each_segment(bvl, bio, i)				\
-	__bio_for_each_segment(bvl, bio, i, (bio)->bi_idx)
-
-/*
- * get a reference to a bio, so it won't disappear. the intended use is
- * something like:
- *
- * bio_get(bio);
- * submit_bio(rw, bio);
- * if (bio->bi_flags ...)
- *	do_something
- * bio_put(bio);
- *
- * without the bio_get(), it could potentially complete I/O before submit_bio
- * returns. and then bio would be freed memory when if (bio->bi_flags ...)
- * runs
- */
-#define bio_get(bio)	atomic_inc(&(bio)->bi_cnt)
-
-#if defined(CONFIG_BLK_DEV_INTEGRITY)
-/*
- * bio integrity payload
- */
-struct bio_integrity_payload {
-	struct bio		*bip_bio;	/* parent bio */
-
-	sector_t		bip_sector;	/* virtual start sector */
-
-	void			*bip_buf;	/* generated integrity data */
-	bio_end_io_t		*bip_end_io;	/* saved I/O completion fn */
-
-	unsigned int		bip_size;
-
-	unsigned short		bip_slab;	/* slab the bip came from */
-	unsigned short		bip_vcnt;	/* # of integrity bio_vecs */
-	unsigned short		bip_idx;	/* current bip_vec index */
-
-	struct work_struct	bip_work;	/* I/O completion */
-	struct bio_vec		bip_vec[0];	/* embedded bvec array */
-};
-#endif /* CONFIG_BLK_DEV_INTEGRITY */
-
-/*
- * A bio_pair is used when we need to split a bio.
- * This can only happen for a bio that refers to just one
- * page of data, and in the unusual situation when the
- * page crosses a chunk/device boundary
- *
- * The address of the master bio is stored in bio1.bi_private
- * The address of the pool the pair was allocated from is stored
- *   in bio2.bi_private
- */
-struct bio_pair {
-	struct bio			bio1, bio2;
-	struct bio_vec			bv1, bv2;
-#if defined(CONFIG_BLK_DEV_INTEGRITY)
-	struct bio_integrity_payload	bip1, bip2;
-	struct bio_vec			iv1, iv2;
-#endif
-	atomic_t			cnt;
-	int				error;
-};
-extern struct bio_pair *bio_split(struct bio *bi, int first_sectors);
-extern void bio_pair_release(struct bio_pair *dbio);
-
-extern struct bio_set *bioset_create(unsigned int, unsigned int);
-extern void bioset_free(struct bio_set *);
-
-extern struct bio *bio_alloc(gfp_t, unsigned int);
-extern struct bio *bio_kmalloc(gfp_t, unsigned int);
-extern struct bio *bio_alloc_bioset(gfp_t, int, struct bio_set *);
-extern void bio_put(struct bio *);
-extern void bio_free(struct bio *, struct bio_set *);
-
-extern void bio_endio(struct bio *, int);
-struct request_queue;
-extern int bio_phys_segments(struct request_queue *, struct bio *);
-
-extern void __bio_clone(struct bio *, struct bio *);
-extern struct bio *bio_clone(struct bio *, gfp_t);
-
-extern void bio_init(struct bio *);
-
-extern int bio_add_page(struct bio *, struct page *, unsigned int,unsigned int);
-extern int bio_add_pc_page(struct request_queue *, struct bio *, struct page *,
-			   unsigned int, unsigned int);
-extern int bio_get_nr_vecs(struct block_device *);
-extern sector_t bio_sector_offset(struct bio *, unsigned short, unsigned int);
-extern struct bio *bio_map_user(struct request_queue *, struct block_device *,
-				unsigned long, unsigned int, int, gfp_t);
-struct sg_iovec;
-struct rq_map_data;
-extern struct bio *bio_map_user_iov(struct request_queue *,
-				    struct block_device *,
-				    struct sg_iovec *, int, int, gfp_t);
-extern void bio_unmap_user(struct bio *);
-extern struct bio *bio_map_kern(struct request_queue *, void *, unsigned int,
-				gfp_t);
-extern struct bio *bio_copy_kern(struct request_queue *, void *, unsigned int,
-				 gfp_t, int);
-extern void bio_set_pages_dirty(struct bio *bio);
-extern void bio_check_pages_dirty(struct bio *bio);
-
-#ifndef ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE
-# error	"You should define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE for your platform"
-#endif
-#if ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE
-extern void bio_flush_dcache_pages(struct bio *bi);
-#else
-static inline void bio_flush_dcache_pages(struct bio *bi)
-{
-}
-#endif
-
-extern struct bio *bio_copy_user(struct request_queue *, struct rq_map_data *,
-				 unsigned long, unsigned int, int, gfp_t);
-extern struct bio *bio_copy_user_iov(struct request_queue *,
-				     struct rq_map_data *, struct sg_iovec *,
-				     int, int, gfp_t);
-extern int bio_uncopy_user(struct bio *);
-void zero_fill_bio(struct bio *bio);
-extern struct bio_vec *bvec_alloc_bs(gfp_t, int, unsigned long *, struct bio_set *);
-extern void bvec_free_bs(struct bio_set *, struct bio_vec *, unsigned int);
-extern unsigned int bvec_nr_vecs(unsigned short idx);
-
-/*
- * bio_set is used to allow other portions of the IO system to
- * allocate their own private memory pools for bio and iovec structures.
- * These memory pools in turn all allocate from the bio_slab
- * and the bvec_slabs[].
- */
-#define BIO_POOL_SIZE 2
-#define BIOVEC_NR_POOLS 6
-#define BIOVEC_MAX_IDX	(BIOVEC_NR_POOLS - 1)
-
-struct bio_set {
-	struct kmem_cache *bio_slab;
-	unsigned int front_pad;
-
-	mempool_t *bio_pool;
-#if defined(CONFIG_BLK_DEV_INTEGRITY)
-	mempool_t *bio_integrity_pool;
-#endif
-	mempool_t *bvec_pool;
-};
-
-struct biovec_slab {
-	int nr_vecs;
-	char *name;
-	struct kmem_cache *slab;
-};
-
-extern struct bio_set *fs_bio_set;
-
-/*
- * a small number of entries is fine, not going to be performance critical.
- * basically we just need to survive
- */
-#define BIO_SPLIT_ENTRIES 2
-
-#ifdef CONFIG_HIGHMEM
-/*
- * remember never ever reenable interrupts between a bvec_kmap_irq and
- * bvec_kunmap_irq!
- */
-static inline char *bvec_kmap_irq(struct bio_vec *bvec, unsigned long *flags)
-{
-	unsigned long addr;
-
-	/*
-	 * might not be a highmem page, but the preempt/irq count
-	 * balancing is a lot nicer this way
-	 */
-	local_irq_save(*flags);
-	addr = (unsigned long) kmap_atomic(bvec->bv_page);
-
-	BUG_ON(addr & ~PAGE_MASK);
-
-	return (char *) addr + bvec->bv_offset;
-}
-
-static inline void bvec_kunmap_irq(char *buffer, unsigned long *flags)
-{
-	unsigned long ptr = (unsigned long) buffer & PAGE_MASK;
-
-	kunmap_atomic((void *) ptr);
-	local_irq_restore(*flags);
-}
-
-#else
-static inline char *bvec_kmap_irq(struct bio_vec *bvec, unsigned long *flags)
-{
-	return page_address(bvec->bv_page) + bvec->bv_offset;
-}
-
-static inline void bvec_kunmap_irq(char *buffer, unsigned long *flags)
-{
-	*flags = 0;
-}
-#endif
-
-static inline char *__bio_kmap_irq(struct bio *bio, unsigned short idx,
-				   unsigned long *flags)
-{
-	return bvec_kmap_irq(bio_iovec_idx(bio, idx), flags);
-}
-#define __bio_kunmap_irq(buf, flags)	bvec_kunmap_irq(buf, flags)
-
-#define bio_kmap_irq(bio, flags) \
-	__bio_kmap_irq((bio), (bio)->bi_idx, (flags))
-#define bio_kunmap_irq(buf,flags)	__bio_kunmap_irq(buf, flags)
-
-/*
- * Check whether this bio carries any data or not. A NULL bio is allowed.
- */
-static inline int bio_has_data(struct bio *bio)
-{
-	return bio && bio->bi_io_vec != NULL;
-}
-
-/*
- * BIO list management for use by remapping drivers (e.g. DM or MD) and loop.
- *
- * A bio_list anchors a singly-linked list of bios chained through the bi_next
- * member of the bio.  The bio_list also caches the last list member to allow
- * fast access to the tail.
- */
-struct bio_list {
-	struct bio *head;
-	struct bio *tail;
-};
-
-static inline int bio_list_empty(const struct bio_list *bl)
-{
-	return bl->head == NULL;
-}
-
-static inline void bio_list_init(struct bio_list *bl)
-{
-	bl->head = bl->tail = NULL;
-}
-
-#define bio_list_for_each(bio, bl) \
-	for (bio = (bl)->head; bio; bio = bio->bi_next)
-
-static inline unsigned bio_list_size(const struct bio_list *bl)
-{
-	unsigned sz = 0;
-	struct bio *bio;
-
-	bio_list_for_each(bio, bl)
-		sz++;
-
-	return sz;
-}
-
-static inline void bio_list_add(struct bio_list *bl, struct bio *bio)
-{
-	bio->bi_next = NULL;
-
-	if (bl->tail)
-		bl->tail->bi_next = bio;
-	else
-		bl->head = bio;
-
-	bl->tail = bio;
-}
-
-static inline void bio_list_add_head(struct bio_list *bl, struct bio *bio)
-{
-	bio->bi_next = bl->head;
-
-	bl->head = bio;
-
-	if (!bl->tail)
-		bl->tail = bio;
-}
-
-static inline void bio_list_merge(struct bio_list *bl, struct bio_list *bl2)
-{
-	if (!bl2->head)
-		return;
-
-	if (bl->tail)
-		bl->tail->bi_next = bl2->head;
-	else
-		bl->head = bl2->head;
-
-	bl->tail = bl2->tail;
-}
-
-static inline void bio_list_merge_head(struct bio_list *bl,
-				       struct bio_list *bl2)
-{
-	if (!bl2->head)
-		return;
-
-	if (bl->head)
-		bl2->tail->bi_next = bl->head;
-	else
-		bl->tail = bl2->tail;
-
-	bl->head = bl2->head;
-}
-
-static inline struct bio *bio_list_peek(struct bio_list *bl)
-{
-	return bl->head;
-}
-
-static inline struct bio *bio_list_pop(struct bio_list *bl)
-{
-	struct bio *bio = bl->head;
-
-	if (bio) {
-		bl->head = bl->head->bi_next;
-		if (!bl->head)
-			bl->tail = NULL;
-
-		bio->bi_next = NULL;
-	}
-
-	return bio;
-}
-
-static inline struct bio *bio_list_get(struct bio_list *bl)
-{
-	struct bio *bio = bl->head;
-
-	bl->head = bl->tail = NULL;
-
-	return bio;
-}
-
-#if defined(CONFIG_BLK_DEV_INTEGRITY)
-
-#define bip_vec_idx(bip, idx)	(&(bip->bip_vec[(idx)]))
-#define bip_vec(bip)		bip_vec_idx(bip, 0)
-
-#define __bip_for_each_vec(bvl, bip, i, start_idx)			\
-	for (bvl = bip_vec_idx((bip), (start_idx)), i = (start_idx);	\
-	     i < (bip)->bip_vcnt;					\
-	     bvl++, i++)
-
-#define bip_for_each_vec(bvl, bip, i)					\
-	__bip_for_each_vec(bvl, bip, i, (bip)->bip_idx)
-
-#define bio_for_each_integrity_vec(_bvl, _bio, _iter)			\
-	for_each_bio(_bio)						\
-		bip_for_each_vec(_bvl, _bio->bi_integrity, _iter)
-
-#define bio_integrity(bio) (bio->bi_integrity != NULL)
-
-extern struct bio_integrity_payload *bio_integrity_alloc_bioset(struct bio *, gfp_t, unsigned int, struct bio_set *);
-extern struct bio_integrity_payload *bio_integrity_alloc(struct bio *, gfp_t, unsigned int);
-extern void bio_integrity_free(struct bio *, struct bio_set *);
-extern int bio_integrity_add_page(struct bio *, struct page *, unsigned int, unsigned int);
-extern int bio_integrity_enabled(struct bio *bio);
-extern int bio_integrity_set_tag(struct bio *, void *, unsigned int);
-extern int bio_integrity_get_tag(struct bio *, void *, unsigned int);
-extern int bio_integrity_prep(struct bio *);
-extern void bio_integrity_endio(struct bio *, int);
-extern void bio_integrity_advance(struct bio *, unsigned int);
-extern void bio_integrity_trim(struct bio *, unsigned int, unsigned int);
-extern void bio_integrity_split(struct bio *, struct bio_pair *, int);
-extern int bio_integrity_clone(struct bio *, struct bio *, gfp_t, struct bio_set *);
-extern int bioset_integrity_create(struct bio_set *, int);
-extern void bioset_integrity_free(struct bio_set *);
-extern void bio_integrity_init(void);
-
-#else /* CONFIG_BLK_DEV_INTEGRITY */
-
-static inline int bio_integrity(struct bio *bio)
-{
-	return 0;
-}
-
-static inline int bio_integrity_enabled(struct bio *bio)
-{
-	return 0;
-}
-
-static inline int bioset_integrity_create(struct bio_set *bs, int pool_size)
-{
-	return 0;
-}
-
-static inline void bioset_integrity_free (struct bio_set *bs)
-{
-	return;
-}
-
-static inline int bio_integrity_prep(struct bio *bio)
-{
-	return 0;
-}
-
-static inline void bio_integrity_free(struct bio *bio, struct bio_set *bs)
-{
-	return;
-}
-
-static inline int bio_integrity_clone(struct bio *bio, struct bio *bio_src,
-				      gfp_t gfp_mask, struct bio_set *bs)
-{
-	return 0;
-}
-
-static inline void bio_integrity_split(struct bio *bio, struct bio_pair *bp,
-				       int sectors)
-{
-	return;
-}
-
-static inline void bio_integrity_advance(struct bio *bio,
-					 unsigned int bytes_done)
-{
-	return;
-}
-
-static inline void bio_integrity_trim(struct bio *bio, unsigned int offset,
-				      unsigned int sectors)
-{
-	return;
-}
-
-static inline void bio_integrity_init(void)
-{
-	return;
-}
-
-#endif /* CONFIG_BLK_DEV_INTEGRITY */
-
-#endif /* CONFIG_BLOCK */
-#endif /* __LINUX_BIO_H */
diff --git a/ANDROID_3.4.5/include/linux/bit_spinlock.h b/ANDROID_3.4.5/include/linux/bit_spinlock.h
deleted file mode 100644
index 3b5bafce..00000000
--- a/ANDROID_3.4.5/include/linux/bit_spinlock.h
+++ /dev/null
@@ -1,100 +0,0 @@
-#ifndef __LINUX_BIT_SPINLOCK_H
-#define __LINUX_BIT_SPINLOCK_H
-
-#include <linux/kernel.h>
-#include <linux/preempt.h>
-#include <linux/atomic.h>
-#include <linux/bug.h>
-
-/*
- *  bit-based spin_lock()
- *
- * Don't use this unless you really need to: spin_lock() and spin_unlock()
- * are significantly faster.
- */
-static inline void bit_spin_lock(int bitnum, unsigned long *addr)
-{
-	/*
-	 * Assuming the lock is uncontended, this never enters
-	 * the body of the outer loop. If it is contended, then
-	 * within the inner loop a non-atomic test is used to
-	 * busywait with less bus contention for a good time to
-	 * attempt to acquire the lock bit.
-	 */
-	preempt_disable();
-#if defined(CONFIG_SMP) || defined(CONFIG_DEBUG_SPINLOCK)
-	while (unlikely(test_and_set_bit_lock(bitnum, addr))) {
-		preempt_enable();
-		do {
-			cpu_relax();
-		} while (test_bit(bitnum, addr));
-		preempt_disable();
-	}
-#endif
-	__acquire(bitlock);
-}
-
-/*
- * Return true if it was acquired
- */
-static inline int bit_spin_trylock(int bitnum, unsigned long *addr)
-{
-	preempt_disable();
-#if defined(CONFIG_SMP) || defined(CONFIG_DEBUG_SPINLOCK)
-	if (unlikely(test_and_set_bit_lock(bitnum, addr))) {
-		preempt_enable();
-		return 0;
-	}
-#endif
-	__acquire(bitlock);
-	return 1;
-}
-
-/*
- *  bit-based spin_unlock()
- */
-static inline void bit_spin_unlock(int bitnum, unsigned long *addr)
-{
-#ifdef CONFIG_DEBUG_SPINLOCK
-	BUG_ON(!test_bit(bitnum, addr));
-#endif
-#if defined(CONFIG_SMP) || defined(CONFIG_DEBUG_SPINLOCK)
-	clear_bit_unlock(bitnum, addr);
-#endif
-	preempt_enable();
-	__release(bitlock);
-}
-
-/*
- *  bit-based spin_unlock()
- *  non-atomic version, which can be used eg. if the bit lock itself is
- *  protecting the rest of the flags in the word.
- */
-static inline void __bit_spin_unlock(int bitnum, unsigned long *addr)
-{
-#ifdef CONFIG_DEBUG_SPINLOCK
-	BUG_ON(!test_bit(bitnum, addr));
-#endif
-#if defined(CONFIG_SMP) || defined(CONFIG_DEBUG_SPINLOCK)
-	__clear_bit_unlock(bitnum, addr);
-#endif
-	preempt_enable();
-	__release(bitlock);
-}
-
-/*
- * Return true if the lock is held.
- */
-static inline int bit_spin_is_locked(int bitnum, unsigned long *addr)
-{
-#if defined(CONFIG_SMP) || defined(CONFIG_DEBUG_SPINLOCK)
-	return test_bit(bitnum, addr);
-#elif defined CONFIG_PREEMPT_COUNT
-	return preempt_count();
-#else
-	return 1;
-#endif
-}
-
-#endif /* __LINUX_BIT_SPINLOCK_H */
-
diff --git a/ANDROID_3.4.5/include/linux/bitmap.h b/ANDROID_3.4.5/include/linux/bitmap.h
deleted file mode 100644
index 7ad63450..00000000
--- a/ANDROID_3.4.5/include/linux/bitmap.h
+++ /dev/null
@@ -1,309 +0,0 @@
-#ifndef __LINUX_BITMAP_H
-#define __LINUX_BITMAP_H
-
-#ifndef __ASSEMBLY__
-
-#include <linux/types.h>
-#include <linux/bitops.h>
-#include <linux/string.h>
-#include <linux/kernel.h>
-
-/*
- * bitmaps provide bit arrays that consume one or more unsigned
- * longs.  The bitmap interface and available operations are listed
- * here, in bitmap.h
- *
- * Function implementations generic to all architectures are in
- * lib/bitmap.c.  Functions implementations that are architecture
- * specific are in various include/asm-<arch>/bitops.h headers
- * and other arch/<arch> specific files.
- *
- * See lib/bitmap.c for more details.
- */
-
-/*
- * The available bitmap operations and their rough meaning in the
- * case that the bitmap is a single unsigned long are thus:
- *
- * Note that nbits should be always a compile time evaluable constant.
- * Otherwise many inlines will generate horrible code.
- *
- * bitmap_zero(dst, nbits)			*dst = 0UL
- * bitmap_fill(dst, nbits)			*dst = ~0UL
- * bitmap_copy(dst, src, nbits)			*dst = *src
- * bitmap_and(dst, src1, src2, nbits)		*dst = *src1 & *src2
- * bitmap_or(dst, src1, src2, nbits)		*dst = *src1 | *src2
- * bitmap_xor(dst, src1, src2, nbits)		*dst = *src1 ^ *src2
- * bitmap_andnot(dst, src1, src2, nbits)	*dst = *src1 & ~(*src2)
- * bitmap_complement(dst, src, nbits)		*dst = ~(*src)
- * bitmap_equal(src1, src2, nbits)		Are *src1 and *src2 equal?
- * bitmap_intersects(src1, src2, nbits) 	Do *src1 and *src2 overlap?
- * bitmap_subset(src1, src2, nbits)		Is *src1 a subset of *src2?
- * bitmap_empty(src, nbits)			Are all bits zero in *src?
- * bitmap_full(src, nbits)			Are all bits set in *src?
- * bitmap_weight(src, nbits)			Hamming Weight: number set bits
- * bitmap_set(dst, pos, nbits)			Set specified bit area
- * bitmap_clear(dst, pos, nbits)		Clear specified bit area
- * bitmap_find_next_zero_area(buf, len, pos, n, mask)	Find bit free area
- * bitmap_shift_right(dst, src, n, nbits)	*dst = *src >> n
- * bitmap_shift_left(dst, src, n, nbits)	*dst = *src << n
- * bitmap_remap(dst, src, old, new, nbits)	*dst = map(old, new)(src)
- * bitmap_bitremap(oldbit, old, new, nbits)	newbit = map(old, new)(oldbit)
- * bitmap_onto(dst, orig, relmap, nbits)	*dst = orig relative to relmap
- * bitmap_fold(dst, orig, sz, nbits)		dst bits = orig bits mod sz
- * bitmap_scnprintf(buf, len, src, nbits)	Print bitmap src to buf
- * bitmap_parse(buf, buflen, dst, nbits)	Parse bitmap dst from kernel buf
- * bitmap_parse_user(ubuf, ulen, dst, nbits)	Parse bitmap dst from user buf
- * bitmap_scnlistprintf(buf, len, src, nbits)	Print bitmap src as list to buf
- * bitmap_parselist(buf, dst, nbits)		Parse bitmap dst from kernel buf
- * bitmap_parselist_user(buf, dst, nbits)	Parse bitmap dst from user buf
- * bitmap_find_free_region(bitmap, bits, order)	Find and allocate bit region
- * bitmap_release_region(bitmap, pos, order)	Free specified bit region
- * bitmap_allocate_region(bitmap, pos, order)	Allocate specified bit region
- */
-
-/*
- * Also the following operations in asm/bitops.h apply to bitmaps.
- *
- * set_bit(bit, addr)			*addr |= bit
- * clear_bit(bit, addr)			*addr &= ~bit
- * change_bit(bit, addr)		*addr ^= bit
- * test_bit(bit, addr)			Is bit set in *addr?
- * test_and_set_bit(bit, addr)		Set bit and return old value
- * test_and_clear_bit(bit, addr)	Clear bit and return old value
- * test_and_change_bit(bit, addr)	Change bit and return old value
- * find_first_zero_bit(addr, nbits)	Position first zero bit in *addr
- * find_first_bit(addr, nbits)		Position first set bit in *addr
- * find_next_zero_bit(addr, nbits, bit)	Position next zero bit in *addr >= bit
- * find_next_bit(addr, nbits, bit)	Position next set bit in *addr >= bit
- */
-
-/*
- * The DECLARE_BITMAP(name,bits) macro, in linux/types.h, can be used
- * to declare an array named 'name' of just enough unsigned longs to
- * contain all bit positions from 0 to 'bits' - 1.
- */
-
-/*
- * lib/bitmap.c provides these functions:
- */
-
-extern int __bitmap_empty(const unsigned long *bitmap, int bits);
-extern int __bitmap_full(const unsigned long *bitmap, int bits);
-extern int __bitmap_equal(const unsigned long *bitmap1,
-                	const unsigned long *bitmap2, int bits);
-extern void __bitmap_complement(unsigned long *dst, const unsigned long *src,
-			int bits);
-extern void __bitmap_shift_right(unsigned long *dst,
-                        const unsigned long *src, int shift, int bits);
-extern void __bitmap_shift_left(unsigned long *dst,
-                        const unsigned long *src, int shift, int bits);
-extern int __bitmap_and(unsigned long *dst, const unsigned long *bitmap1,
-			const unsigned long *bitmap2, int bits);
-extern void __bitmap_or(unsigned long *dst, const unsigned long *bitmap1,
-			const unsigned long *bitmap2, int bits);
-extern void __bitmap_xor(unsigned long *dst, const unsigned long *bitmap1,
-			const unsigned long *bitmap2, int bits);
-extern int __bitmap_andnot(unsigned long *dst, const unsigned long *bitmap1,
-			const unsigned long *bitmap2, int bits);
-extern int __bitmap_intersects(const unsigned long *bitmap1,
-			const unsigned long *bitmap2, int bits);
-extern int __bitmap_subset(const unsigned long *bitmap1,
-			const unsigned long *bitmap2, int bits);
-extern int __bitmap_weight(const unsigned long *bitmap, int bits);
-
-extern void bitmap_set(unsigned long *map, int i, int len);
-extern void bitmap_clear(unsigned long *map, int start, int nr);
-extern unsigned long bitmap_find_next_zero_area(unsigned long *map,
-					 unsigned long size,
-					 unsigned long start,
-					 unsigned int nr,
-					 unsigned long align_mask);
-
-extern int bitmap_scnprintf(char *buf, unsigned int len,
-			const unsigned long *src, int nbits);
-extern int __bitmap_parse(const char *buf, unsigned int buflen, int is_user,
-			unsigned long *dst, int nbits);
-extern int bitmap_parse_user(const char __user *ubuf, unsigned int ulen,
-			unsigned long *dst, int nbits);
-extern int bitmap_scnlistprintf(char *buf, unsigned int len,
-			const unsigned long *src, int nbits);
-extern int bitmap_parselist(const char *buf, unsigned long *maskp,
-			int nmaskbits);
-extern int bitmap_parselist_user(const char __user *ubuf, unsigned int ulen,
-			unsigned long *dst, int nbits);
-extern void bitmap_remap(unsigned long *dst, const unsigned long *src,
-		const unsigned long *old, const unsigned long *new, int bits);
-extern int bitmap_bitremap(int oldbit,
-		const unsigned long *old, const unsigned long *new, int bits);
-extern void bitmap_onto(unsigned long *dst, const unsigned long *orig,
-		const unsigned long *relmap, int bits);
-extern void bitmap_fold(unsigned long *dst, const unsigned long *orig,
-		int sz, int bits);
-extern int bitmap_find_free_region(unsigned long *bitmap, int bits, int order);
-extern void bitmap_release_region(unsigned long *bitmap, int pos, int order);
-extern int bitmap_allocate_region(unsigned long *bitmap, int pos, int order);
-extern void bitmap_copy_le(void *dst, const unsigned long *src, int nbits);
-extern int bitmap_ord_to_pos(const unsigned long *bitmap, int n, int bits);
-
-#define BITMAP_FIRST_WORD_MASK(start) (~0UL << ((start) % BITS_PER_LONG))
-#define BITMAP_LAST_WORD_MASK(nbits)					\
-(									\
-	((nbits) % BITS_PER_LONG) ?					\
-		(1UL<<((nbits) % BITS_PER_LONG))-1 : ~0UL		\
-)
-
-#define small_const_nbits(nbits) \
-	(__builtin_constant_p(nbits) && (nbits) <= BITS_PER_LONG)
-
-static inline void bitmap_zero(unsigned long *dst, int nbits)
-{
-	if (small_const_nbits(nbits))
-		*dst = 0UL;
-	else {
-		int len = BITS_TO_LONGS(nbits) * sizeof(unsigned long);
-		memset(dst, 0, len);
-	}
-}
-
-static inline void bitmap_fill(unsigned long *dst, int nbits)
-{
-	size_t nlongs = BITS_TO_LONGS(nbits);
-	if (!small_const_nbits(nbits)) {
-		int len = (nlongs - 1) * sizeof(unsigned long);
-		memset(dst, 0xff,  len);
-	}
-	dst[nlongs - 1] = BITMAP_LAST_WORD_MASK(nbits);
-}
-
-static inline void bitmap_copy(unsigned long *dst, const unsigned long *src,
-			int nbits)
-{
-	if (small_const_nbits(nbits))
-		*dst = *src;
-	else {
-		int len = BITS_TO_LONGS(nbits) * sizeof(unsigned long);
-		memcpy(dst, src, len);
-	}
-}
-
-static inline int bitmap_and(unsigned long *dst, const unsigned long *src1,
-			const unsigned long *src2, int nbits)
-{
-	if (small_const_nbits(nbits))
-		return (*dst = *src1 & *src2) != 0;
-	return __bitmap_and(dst, src1, src2, nbits);
-}
-
-static inline void bitmap_or(unsigned long *dst, const unsigned long *src1,
-			const unsigned long *src2, int nbits)
-{
-	if (small_const_nbits(nbits))
-		*dst = *src1 | *src2;
-	else
-		__bitmap_or(dst, src1, src2, nbits);
-}
-
-static inline void bitmap_xor(unsigned long *dst, const unsigned long *src1,
-			const unsigned long *src2, int nbits)
-{
-	if (small_const_nbits(nbits))
-		*dst = *src1 ^ *src2;
-	else
-		__bitmap_xor(dst, src1, src2, nbits);
-}
-
-static inline int bitmap_andnot(unsigned long *dst, const unsigned long *src1,
-			const unsigned long *src2, int nbits)
-{
-	if (small_const_nbits(nbits))
-		return (*dst = *src1 & ~(*src2)) != 0;
-	return __bitmap_andnot(dst, src1, src2, nbits);
-}
-
-static inline void bitmap_complement(unsigned long *dst, const unsigned long *src,
-			int nbits)
-{
-	if (small_const_nbits(nbits))
-		*dst = ~(*src) & BITMAP_LAST_WORD_MASK(nbits);
-	else
-		__bitmap_complement(dst, src, nbits);
-}
-
-static inline int bitmap_equal(const unsigned long *src1,
-			const unsigned long *src2, int nbits)
-{
-	if (small_const_nbits(nbits))
-		return ! ((*src1 ^ *src2) & BITMAP_LAST_WORD_MASK(nbits));
-	else
-		return __bitmap_equal(src1, src2, nbits);
-}
-
-static inline int bitmap_intersects(const unsigned long *src1,
-			const unsigned long *src2, int nbits)
-{
-	if (small_const_nbits(nbits))
-		return ((*src1 & *src2) & BITMAP_LAST_WORD_MASK(nbits)) != 0;
-	else
-		return __bitmap_intersects(src1, src2, nbits);
-}
-
-static inline int bitmap_subset(const unsigned long *src1,
-			const unsigned long *src2, int nbits)
-{
-	if (small_const_nbits(nbits))
-		return ! ((*src1 & ~(*src2)) & BITMAP_LAST_WORD_MASK(nbits));
-	else
-		return __bitmap_subset(src1, src2, nbits);
-}
-
-static inline int bitmap_empty(const unsigned long *src, int nbits)
-{
-	if (small_const_nbits(nbits))
-		return ! (*src & BITMAP_LAST_WORD_MASK(nbits));
-	else
-		return __bitmap_empty(src, nbits);
-}
-
-static inline int bitmap_full(const unsigned long *src, int nbits)
-{
-	if (small_const_nbits(nbits))
-		return ! (~(*src) & BITMAP_LAST_WORD_MASK(nbits));
-	else
-		return __bitmap_full(src, nbits);
-}
-
-static inline int bitmap_weight(const unsigned long *src, int nbits)
-{
-	if (small_const_nbits(nbits))
-		return hweight_long(*src & BITMAP_LAST_WORD_MASK(nbits));
-	return __bitmap_weight(src, nbits);
-}
-
-static inline void bitmap_shift_right(unsigned long *dst,
-			const unsigned long *src, int n, int nbits)
-{
-	if (small_const_nbits(nbits))
-		*dst = *src >> n;
-	else
-		__bitmap_shift_right(dst, src, n, nbits);
-}
-
-static inline void bitmap_shift_left(unsigned long *dst,
-			const unsigned long *src, int n, int nbits)
-{
-	if (small_const_nbits(nbits))
-		*dst = (*src << n) & BITMAP_LAST_WORD_MASK(nbits);
-	else
-		__bitmap_shift_left(dst, src, n, nbits);
-}
-
-static inline int bitmap_parse(const char *buf, unsigned int buflen,
-			unsigned long *maskp, int nmaskbits)
-{
-	return __bitmap_parse(buf, buflen, 0, maskp, nmaskbits);
-}
-
-#endif /* __ASSEMBLY__ */
-
-#endif /* __LINUX_BITMAP_H */
diff --git a/ANDROID_3.4.5/include/linux/bitops.h b/ANDROID_3.4.5/include/linux/bitops.h
deleted file mode 100644
index a3b6b821..00000000
--- a/ANDROID_3.4.5/include/linux/bitops.h
+++ /dev/null
@@ -1,201 +0,0 @@
-#ifndef _LINUX_BITOPS_H
-#define _LINUX_BITOPS_H
-#include <asm/types.h>
-
-#ifdef	__KERNEL__
-#define BIT(nr)			(1UL << (nr))
-#define BIT_MASK(nr)		(1UL << ((nr) % BITS_PER_LONG))
-#define BIT_WORD(nr)		((nr) / BITS_PER_LONG)
-#define BITS_PER_BYTE		8
-#define BITS_TO_LONGS(nr)	DIV_ROUND_UP(nr, BITS_PER_BYTE * sizeof(long))
-#endif
-
-extern unsigned int __sw_hweight8(unsigned int w);
-extern unsigned int __sw_hweight16(unsigned int w);
-extern unsigned int __sw_hweight32(unsigned int w);
-extern unsigned long __sw_hweight64(__u64 w);
-
-/*
- * Include this here because some architectures need generic_ffs/fls in
- * scope
- */
-#include <asm/bitops.h>
-
-#define for_each_set_bit(bit, addr, size) \
-	for ((bit) = find_first_bit((addr), (size));		\
-	     (bit) < (size);					\
-	     (bit) = find_next_bit((addr), (size), (bit) + 1))
-
-/* same as for_each_set_bit() but use bit as value to start with */
-#define for_each_set_bit_from(bit, addr, size) \
-	for ((bit) = find_next_bit((addr), (size), (bit));	\
-	     (bit) < (size);					\
-	     (bit) = find_next_bit((addr), (size), (bit) + 1))
-
-#define for_each_clear_bit(bit, addr, size) \
-	for ((bit) = find_first_zero_bit((addr), (size));	\
-	     (bit) < (size);					\
-	     (bit) = find_next_zero_bit((addr), (size), (bit) + 1))
-
-/* same as for_each_clear_bit() but use bit as value to start with */
-#define for_each_clear_bit_from(bit, addr, size) \
-	for ((bit) = find_next_zero_bit((addr), (size), (bit));	\
-	     (bit) < (size);					\
-	     (bit) = find_next_zero_bit((addr), (size), (bit) + 1))
-
-static __inline__ int get_bitmask_order(unsigned int count)
-{
-	int order;
-
-	order = fls(count);
-	return order;	/* We could be slightly more clever with -1 here... */
-}
-
-static __inline__ int get_count_order(unsigned int count)
-{
-	int order;
-
-	order = fls(count) - 1;
-	if (count & (count - 1))
-		order++;
-	return order;
-}
-
-static inline unsigned long hweight_long(unsigned long w)
-{
-	return sizeof(w) == 4 ? hweight32(w) : hweight64(w);
-}
-
-/**
- * rol64 - rotate a 64-bit value left
- * @word: value to rotate
- * @shift: bits to roll
- */
-static inline __u64 rol64(__u64 word, unsigned int shift)
-{
-	return (word << shift) | (word >> (64 - shift));
-}
-
-/**
- * ror64 - rotate a 64-bit value right
- * @word: value to rotate
- * @shift: bits to roll
- */
-static inline __u64 ror64(__u64 word, unsigned int shift)
-{
-	return (word >> shift) | (word << (64 - shift));
-}
-
-/**
- * rol32 - rotate a 32-bit value left
- * @word: value to rotate
- * @shift: bits to roll
- */
-static inline __u32 rol32(__u32 word, unsigned int shift)
-{
-	return (word << shift) | (word >> (32 - shift));
-}
-
-/**
- * ror32 - rotate a 32-bit value right
- * @word: value to rotate
- * @shift: bits to roll
- */
-static inline __u32 ror32(__u32 word, unsigned int shift)
-{
-	return (word >> shift) | (word << (32 - shift));
-}
-
-/**
- * rol16 - rotate a 16-bit value left
- * @word: value to rotate
- * @shift: bits to roll
- */
-static inline __u16 rol16(__u16 word, unsigned int shift)
-{
-	return (word << shift) | (word >> (16 - shift));
-}
-
-/**
- * ror16 - rotate a 16-bit value right
- * @word: value to rotate
- * @shift: bits to roll
- */
-static inline __u16 ror16(__u16 word, unsigned int shift)
-{
-	return (word >> shift) | (word << (16 - shift));
-}
-
-/**
- * rol8 - rotate an 8-bit value left
- * @word: value to rotate
- * @shift: bits to roll
- */
-static inline __u8 rol8(__u8 word, unsigned int shift)
-{
-	return (word << shift) | (word >> (8 - shift));
-}
-
-/**
- * ror8 - rotate an 8-bit value right
- * @word: value to rotate
- * @shift: bits to roll
- */
-static inline __u8 ror8(__u8 word, unsigned int shift)
-{
-	return (word >> shift) | (word << (8 - shift));
-}
-
-/**
- * sign_extend32 - sign extend a 32-bit value using specified bit as sign-bit
- * @value: value to sign extend
- * @index: 0 based bit index (0<=index<32) to sign bit
- */
-static inline __s32 sign_extend32(__u32 value, int index)
-{
-	__u8 shift = 31 - index;
-	return (__s32)(value << shift) >> shift;
-}
-
-static inline unsigned fls_long(unsigned long l)
-{
-	if (sizeof(l) == 4)
-		return fls(l);
-	return fls64(l);
-}
-
-/**
- * __ffs64 - find first set bit in a 64 bit word
- * @word: The 64 bit word
- *
- * On 64 bit arches this is a synomyn for __ffs
- * The result is not defined if no bits are set, so check that @word
- * is non-zero before calling this.
- */
-static inline unsigned long __ffs64(u64 word)
-{
-#if BITS_PER_LONG == 32
-	if (((u32)word) == 0UL)
-		return __ffs((u32)(word >> 32)) + 32;
-#elif BITS_PER_LONG != 64
-#error BITS_PER_LONG not 32 or 64
-#endif
-	return __ffs((unsigned long)word);
-}
-
-#ifdef __KERNEL__
-
-#ifndef find_last_bit
-/**
- * find_last_bit - find the last set bit in a memory region
- * @addr: The address to start the search at
- * @size: The maximum size to search
- *
- * Returns the bit number of the first set bit, or size.
- */
-extern unsigned long find_last_bit(const unsigned long *addr,
-				   unsigned long size);
-#endif
-
-#endif /* __KERNEL__ */
-#endif
diff --git a/ANDROID_3.4.5/include/linux/bitrev.h b/ANDROID_3.4.5/include/linux/bitrev.h
deleted file mode 100644
index 7ffe03f4..00000000
--- a/ANDROID_3.4.5/include/linux/bitrev.h
+++ /dev/null
@@ -1,16 +0,0 @@
-#ifndef _LINUX_BITREV_H
-#define _LINUX_BITREV_H
-
-#include <linux/types.h>
-
-extern u8 const byte_rev_table[256];
-
-static inline u8 bitrev8(u8 byte)
-{
-	return byte_rev_table[byte];
-}
-
-extern u16 bitrev16(u16 in);
-extern u32 bitrev32(u32 in);
-
-#endif /* _LINUX_BITREV_H */
diff --git a/ANDROID_3.4.5/include/linux/blk-iopoll.h b/ANDROID_3.4.5/include/linux/blk-iopoll.h
deleted file mode 100644
index 308734d3..00000000
--- a/ANDROID_3.4.5/include/linux/blk-iopoll.h
+++ /dev/null
@@ -1,48 +0,0 @@
-#ifndef BLK_IOPOLL_H
-#define BLK_IOPOLL_H
-
-struct blk_iopoll;
-typedef int (blk_iopoll_fn)(struct blk_iopoll *, int);
-
-struct blk_iopoll {
-	struct list_head list;
-	unsigned long state;
-	unsigned long data;
-	int weight;
-	int max;
-	blk_iopoll_fn *poll;
-};
-
-enum {
-	IOPOLL_F_SCHED		= 0,
-	IOPOLL_F_DISABLE	= 1,
-};
-
-/*
- * Returns 0 if we successfully set the IOPOLL_F_SCHED bit, indicating
- * that we were the first to acquire this iop for scheduling. If this iop
- * is currently disabled, return "failure".
- */
-static inline int blk_iopoll_sched_prep(struct blk_iopoll *iop)
-{
-	if (!test_bit(IOPOLL_F_DISABLE, &iop->state))
-		return test_and_set_bit(IOPOLL_F_SCHED, &iop->state);
-
-	return 1;
-}
-
-static inline int blk_iopoll_disable_pending(struct blk_iopoll *iop)
-{
-	return test_bit(IOPOLL_F_DISABLE, &iop->state);
-}
-
-extern void blk_iopoll_sched(struct blk_iopoll *);
-extern void blk_iopoll_init(struct blk_iopoll *, int, blk_iopoll_fn *);
-extern void blk_iopoll_complete(struct blk_iopoll *);
-extern void __blk_iopoll_complete(struct blk_iopoll *);
-extern void blk_iopoll_enable(struct blk_iopoll *);
-extern void blk_iopoll_disable(struct blk_iopoll *);
-
-extern int blk_iopoll_enabled;
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/blk_types.h b/ANDROID_3.4.5/include/linux/blk_types.h
deleted file mode 100644
index 4053cbd4..00000000
--- a/ANDROID_3.4.5/include/linux/blk_types.h
+++ /dev/null
@@ -1,195 +0,0 @@
-/*
- * Block data types and constants.  Directly include this file only to
- * break include dependency loop.
- */
-#ifndef __LINUX_BLK_TYPES_H
-#define __LINUX_BLK_TYPES_H
-
-#ifdef CONFIG_BLOCK
-
-#include <linux/types.h>
-
-struct bio_set;
-struct bio;
-struct bio_integrity_payload;
-struct page;
-struct block_device;
-typedef void (bio_end_io_t) (struct bio *, int);
-typedef void (bio_destructor_t) (struct bio *);
-
-/*
- * was unsigned short, but we might as well be ready for > 64kB I/O pages
- */
-struct bio_vec {
-	struct page	*bv_page;
-	unsigned int	bv_len;
-	unsigned int	bv_offset;
-};
-
-/*
- * main unit of I/O for the block layer and lower layers (ie drivers and
- * stacking drivers)
- */
-struct bio {
-	sector_t		bi_sector;	/* device address in 512 byte
-						   sectors */
-	struct bio		*bi_next;	/* request queue link */
-	struct block_device	*bi_bdev;
-	unsigned long		bi_flags;	/* status, command, etc */
-	unsigned long		bi_rw;		/* bottom bits READ/WRITE,
-						 * top bits priority
-						 */
-
-	unsigned short		bi_vcnt;	/* how many bio_vec's */
-	unsigned short		bi_idx;		/* current index into bvl_vec */
-
-	/* Number of segments in this BIO after
-	 * physical address coalescing is performed.
-	 */
-	unsigned int		bi_phys_segments;
-
-	unsigned int		bi_size;	/* residual I/O count */
-
-	/*
-	 * To keep track of the max segment size, we account for the
-	 * sizes of the first and last mergeable segments in this bio.
-	 */
-	unsigned int		bi_seg_front_size;
-	unsigned int		bi_seg_back_size;
-
-	unsigned int		bi_max_vecs;	/* max bvl_vecs we can hold */
-
-	atomic_t		bi_cnt;		/* pin count */
-
-	struct bio_vec		*bi_io_vec;	/* the actual vec list */
-
-	bio_end_io_t		*bi_end_io;
-
-	void			*bi_private;
-#if defined(CONFIG_BLK_DEV_INTEGRITY)
-	struct bio_integrity_payload *bi_integrity;  /* data integrity */
-#endif
-
-	bio_destructor_t	*bi_destructor;	/* destructor */
-
-	/*
-	 * We can inline a number of vecs at the end of the bio, to avoid
-	 * double allocations for a small number of bio_vecs. This member
-	 * MUST obviously be kept at the very end of the bio.
-	 */
-	struct bio_vec		bi_inline_vecs[0];
-};
-
-/*
- * bio flags
- */
-#define BIO_UPTODATE	0	/* ok after I/O completion */
-#define BIO_RW_BLOCK	1	/* RW_AHEAD set, and read/write would block */
-#define BIO_EOF		2	/* out-out-bounds error */
-#define BIO_SEG_VALID	3	/* bi_phys_segments valid */
-#define BIO_CLONED	4	/* doesn't own data */
-#define BIO_BOUNCED	5	/* bio is a bounce bio */
-#define BIO_USER_MAPPED 6	/* contains user pages */
-#define BIO_EOPNOTSUPP	7	/* not supported */
-#define BIO_NULL_MAPPED 8	/* contains invalid user pages */
-#define BIO_FS_INTEGRITY 9	/* fs owns integrity data, not block layer */
-#define BIO_QUIET	10	/* Make BIO Quiet */
-#define BIO_MAPPED_INTEGRITY 11/* integrity metadata has been remapped */
-#define bio_flagged(bio, flag)	((bio)->bi_flags & (1 << (flag)))
-
-/*
- * top 4 bits of bio flags indicate the pool this bio came from
- */
-#define BIO_POOL_BITS		(4)
-#define BIO_POOL_NONE		((1UL << BIO_POOL_BITS) - 1)
-#define BIO_POOL_OFFSET		(BITS_PER_LONG - BIO_POOL_BITS)
-#define BIO_POOL_MASK		(1UL << BIO_POOL_OFFSET)
-#define BIO_POOL_IDX(bio)	((bio)->bi_flags >> BIO_POOL_OFFSET)
-
-#endif /* CONFIG_BLOCK */
-
-/*
- * Request flags.  For use in the cmd_flags field of struct request, and in
- * bi_rw of struct bio.  Note that some flags are only valid in either one.
- */
-enum rq_flag_bits {
-	/* common flags */
-	__REQ_WRITE,		/* not set, read. set, write */
-	__REQ_FAILFAST_DEV,	/* no driver retries of device errors */
-	__REQ_FAILFAST_TRANSPORT, /* no driver retries of transport errors */
-	__REQ_FAILFAST_DRIVER,	/* no driver retries of driver errors */
-
-	__REQ_SYNC,		/* request is sync (sync write or read) */
-	__REQ_META,		/* metadata io request */
-	__REQ_PRIO,		/* boost priority in cfq */
-	__REQ_DISCARD,		/* request to discard sectors */
-	__REQ_SECURE,		/* secure discard (used with __REQ_DISCARD) */
-
-	__REQ_NOIDLE,		/* don't anticipate more IO after this one */
-	__REQ_FUA,		/* forced unit access */
-	__REQ_FLUSH,		/* request for cache flush */
-
-	/* bio only flags */
-	__REQ_RAHEAD,		/* read ahead, can fail anytime */
-	__REQ_THROTTLED,	/* This bio has already been subjected to
-				 * throttling rules. Don't do it again. */
-
-	/* request only flags */
-	__REQ_SORTED,		/* elevator knows about this request */
-	__REQ_SOFTBARRIER,	/* may not be passed by ioscheduler */
-	__REQ_NOMERGE,		/* don't touch this for merging */
-	__REQ_STARTED,		/* drive already may have started this one */
-	__REQ_DONTPREP,		/* don't call prep for this one */
-	__REQ_QUEUED,		/* uses queueing */
-	__REQ_ELVPRIV,		/* elevator private data attached */
-	__REQ_FAILED,		/* set if the request failed */
-	__REQ_QUIET,		/* don't worry about errors */
-	__REQ_PREEMPT,		/* set for "ide_preempt" requests */
-	__REQ_ALLOCED,		/* request came from our alloc pool */
-	__REQ_COPY_USER,	/* contains copies of user pages */
-	__REQ_FLUSH_SEQ,	/* request for flush sequence */
-	__REQ_IO_STAT,		/* account I/O stat */
-	__REQ_MIXED_MERGE,	/* merge of different types, fail separately */
-	__REQ_NR_BITS,		/* stops here */
-};
-
-#define REQ_WRITE		(1 << __REQ_WRITE)
-#define REQ_FAILFAST_DEV	(1 << __REQ_FAILFAST_DEV)
-#define REQ_FAILFAST_TRANSPORT	(1 << __REQ_FAILFAST_TRANSPORT)
-#define REQ_FAILFAST_DRIVER	(1 << __REQ_FAILFAST_DRIVER)
-#define REQ_SYNC		(1 << __REQ_SYNC)
-#define REQ_META		(1 << __REQ_META)
-#define REQ_PRIO		(1 << __REQ_PRIO)
-#define REQ_DISCARD		(1 << __REQ_DISCARD)
-#define REQ_NOIDLE		(1 << __REQ_NOIDLE)
-
-#define REQ_FAILFAST_MASK \
-	(REQ_FAILFAST_DEV | REQ_FAILFAST_TRANSPORT | REQ_FAILFAST_DRIVER)
-#define REQ_COMMON_MASK \
-	(REQ_WRITE | REQ_FAILFAST_MASK | REQ_SYNC | REQ_META | REQ_PRIO | \
-	 REQ_DISCARD | REQ_NOIDLE | REQ_FLUSH | REQ_FUA | REQ_SECURE)
-#define REQ_CLONE_MASK		REQ_COMMON_MASK
-
-#define REQ_RAHEAD		(1 << __REQ_RAHEAD)
-#define REQ_THROTTLED		(1 << __REQ_THROTTLED)
-
-#define REQ_SORTED		(1 << __REQ_SORTED)
-#define REQ_SOFTBARRIER		(1 << __REQ_SOFTBARRIER)
-#define REQ_FUA			(1 << __REQ_FUA)
-#define REQ_NOMERGE		(1 << __REQ_NOMERGE)
-#define REQ_STARTED		(1 << __REQ_STARTED)
-#define REQ_DONTPREP		(1 << __REQ_DONTPREP)
-#define REQ_QUEUED		(1 << __REQ_QUEUED)
-#define REQ_ELVPRIV		(1 << __REQ_ELVPRIV)
-#define REQ_FAILED		(1 << __REQ_FAILED)
-#define REQ_QUIET		(1 << __REQ_QUIET)
-#define REQ_PREEMPT		(1 << __REQ_PREEMPT)
-#define REQ_ALLOCED		(1 << __REQ_ALLOCED)
-#define REQ_COPY_USER		(1 << __REQ_COPY_USER)
-#define REQ_FLUSH		(1 << __REQ_FLUSH)
-#define REQ_FLUSH_SEQ		(1 << __REQ_FLUSH_SEQ)
-#define REQ_IO_STAT		(1 << __REQ_IO_STAT)
-#define REQ_MIXED_MERGE		(1 << __REQ_MIXED_MERGE)
-#define REQ_SECURE		(1 << __REQ_SECURE)
-
-#endif /* __LINUX_BLK_TYPES_H */
diff --git a/ANDROID_3.4.5/include/linux/blkdev.h b/ANDROID_3.4.5/include/linux/blkdev.h
deleted file mode 100644
index 4d4ac24a..00000000
--- a/ANDROID_3.4.5/include/linux/blkdev.h
+++ /dev/null
@@ -1,1421 +0,0 @@
-#ifndef _LINUX_BLKDEV_H
-#define _LINUX_BLKDEV_H
-
-#include <linux/sched.h>
-
-#ifdef CONFIG_BLOCK
-
-#include <linux/major.h>
-#include <linux/genhd.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/workqueue.h>
-#include <linux/pagemap.h>
-#include <linux/backing-dev.h>
-#include <linux/wait.h>
-#include <linux/mempool.h>
-#include <linux/bio.h>
-#include <linux/stringify.h>
-#include <linux/gfp.h>
-#include <linux/bsg.h>
-#include <linux/smp.h>
-
-#include <asm/scatterlist.h>
-
-struct module;
-struct scsi_ioctl_command;
-
-struct request_queue;
-struct elevator_queue;
-struct request_pm_state;
-struct blk_trace;
-struct request;
-struct sg_io_hdr;
-struct bsg_job;
-
-#define BLKDEV_MIN_RQ	4
-#define BLKDEV_MAX_RQ	128	/* Default maximum */
-
-struct request;
-typedef void (rq_end_io_fn)(struct request *, int);
-
-struct request_list {
-	/*
-	 * count[], starved[], and wait[] are indexed by
-	 * BLK_RW_SYNC/BLK_RW_ASYNC
-	 */
-	int count[2];
-	int starved[2];
-	int elvpriv;
-	mempool_t *rq_pool;
-	wait_queue_head_t wait[2];
-};
-
-/*
- * request command types
- */
-enum rq_cmd_type_bits {
-	REQ_TYPE_FS		= 1,	/* fs request */
-	REQ_TYPE_BLOCK_PC,		/* scsi command */
-	REQ_TYPE_SENSE,			/* sense request */
-	REQ_TYPE_PM_SUSPEND,		/* suspend request */
-	REQ_TYPE_PM_RESUME,		/* resume request */
-	REQ_TYPE_PM_SHUTDOWN,		/* shutdown request */
-	REQ_TYPE_SPECIAL,		/* driver defined type */
-	/*
-	 * for ATA/ATAPI devices. this really doesn't belong here, ide should
-	 * use REQ_TYPE_SPECIAL and use rq->cmd[0] with the range of driver
-	 * private REQ_LB opcodes to differentiate what type of request this is
-	 */
-	REQ_TYPE_ATA_TASKFILE,
-	REQ_TYPE_ATA_PC,
-};
-
-#define BLK_MAX_CDB	16
-
-/*
- * try to put the fields that are referenced together in the same cacheline.
- * if you modify this structure, be sure to check block/blk-core.c:blk_rq_init()
- * as well!
- */
-struct request {
-	struct list_head queuelist;
-	struct call_single_data csd;
-
-	struct request_queue *q;
-
-	unsigned int cmd_flags;
-	enum rq_cmd_type_bits cmd_type;
-	unsigned long atomic_flags;
-
-	int cpu;
-
-	/* the following two fields are internal, NEVER access directly */
-	unsigned int __data_len;	/* total data len */
-	sector_t __sector;		/* sector cursor */
-
-	struct bio *bio;
-	struct bio *biotail;
-
-	struct hlist_node hash;	/* merge hash */
-	/*
-	 * The rb_node is only used inside the io scheduler, requests
-	 * are pruned when moved to the dispatch queue. So let the
-	 * completion_data share space with the rb_node.
-	 */
-	union {
-		struct rb_node rb_node;	/* sort/lookup */
-		void *completion_data;
-	};
-
-	/*
-	 * Three pointers are available for the IO schedulers, if they need
-	 * more they have to dynamically allocate it.  Flush requests are
-	 * never put on the IO scheduler. So let the flush fields share
-	 * space with the elevator data.
-	 */
-	union {
-		struct {
-			struct io_cq		*icq;
-			void			*priv[2];
-		} elv;
-
-		struct {
-			unsigned int		seq;
-			struct list_head	list;
-			rq_end_io_fn		*saved_end_io;
-		} flush;
-	};
-
-	struct gendisk *rq_disk;
-	struct hd_struct *part;
-	unsigned long start_time;
-#ifdef CONFIG_BLK_CGROUP
-	unsigned long long start_time_ns;
-	unsigned long long io_start_time_ns;    /* when passed to hardware */
-#endif
-	/* Number of scatter-gather DMA addr+len pairs after
-	 * physical address coalescing is performed.
-	 */
-	unsigned short nr_phys_segments;
-#if defined(CONFIG_BLK_DEV_INTEGRITY)
-	unsigned short nr_integrity_segments;
-#endif
-
-	unsigned short ioprio;
-
-	int ref_count;
-
-	void *special;		/* opaque pointer available for LLD use */
-	char *buffer;		/* kaddr of the current segment if available */
-
-	int tag;
-	int errors;
-
-	/*
-	 * when request is used as a packet command carrier
-	 */
-	unsigned char __cmd[BLK_MAX_CDB];
-	unsigned char *cmd;
-	unsigned short cmd_len;
-
-	unsigned int extra_len;	/* length of alignment and padding */
-	unsigned int sense_len;
-	unsigned int resid_len;	/* residual count */
-	void *sense;
-
-	unsigned long deadline;
-	struct list_head timeout_list;
-	unsigned int timeout;
-	int retries;
-
-	/*
-	 * completion callback.
-	 */
-	rq_end_io_fn *end_io;
-	void *end_io_data;
-
-	/* for bidi */
-	struct request *next_rq;
-};
-
-static inline unsigned short req_get_ioprio(struct request *req)
-{
-	return req->ioprio;
-}
-
-/*
- * State information carried for REQ_TYPE_PM_SUSPEND and REQ_TYPE_PM_RESUME
- * requests. Some step values could eventually be made generic.
- */
-struct request_pm_state
-{
-	/* PM state machine step value, currently driver specific */
-	int	pm_step;
-	/* requested PM state value (S1, S2, S3, S4, ...) */
-	u32	pm_state;
-	void*	data;		/* for driver use */
-};
-
-#include <linux/elevator.h>
-
-typedef void (request_fn_proc) (struct request_queue *q);
-typedef void (make_request_fn) (struct request_queue *q, struct bio *bio);
-typedef int (prep_rq_fn) (struct request_queue *, struct request *);
-typedef void (unprep_rq_fn) (struct request_queue *, struct request *);
-
-struct bio_vec;
-struct bvec_merge_data {
-	struct block_device *bi_bdev;
-	sector_t bi_sector;
-	unsigned bi_size;
-	unsigned long bi_rw;
-};
-typedef int (merge_bvec_fn) (struct request_queue *, struct bvec_merge_data *,
-			     struct bio_vec *);
-typedef void (softirq_done_fn)(struct request *);
-typedef int (dma_drain_needed_fn)(struct request *);
-typedef int (lld_busy_fn) (struct request_queue *q);
-typedef int (bsg_job_fn) (struct bsg_job *);
-
-enum blk_eh_timer_return {
-	BLK_EH_NOT_HANDLED,
-	BLK_EH_HANDLED,
-	BLK_EH_RESET_TIMER,
-};
-
-typedef enum blk_eh_timer_return (rq_timed_out_fn)(struct request *);
-
-enum blk_queue_state {
-	Queue_down,
-	Queue_up,
-};
-
-struct blk_queue_tag {
-	struct request **tag_index;	/* map of busy tags */
-	unsigned long *tag_map;		/* bit map of free/busy tags */
-	int busy;			/* current depth */
-	int max_depth;			/* what we will send to device */
-	int real_max_depth;		/* what the array can hold */
-	atomic_t refcnt;		/* map can be shared */
-};
-
-#define BLK_SCSI_MAX_CMDS	(256)
-#define BLK_SCSI_CMD_PER_LONG	(BLK_SCSI_MAX_CMDS / (sizeof(long) * 8))
-
-struct queue_limits {
-	unsigned long		bounce_pfn;
-	unsigned long		seg_boundary_mask;
-
-	unsigned int		max_hw_sectors;
-	unsigned int		max_sectors;
-	unsigned int		max_segment_size;
-	unsigned int		physical_block_size;
-	unsigned int		alignment_offset;
-	unsigned int		io_min;
-	unsigned int		io_opt;
-	unsigned int		max_discard_sectors;
-	unsigned int		discard_granularity;
-	unsigned int		discard_alignment;
-
-	unsigned short		logical_block_size;
-	unsigned short		max_segments;
-	unsigned short		max_integrity_segments;
-
-	unsigned char		misaligned;
-	unsigned char		discard_misaligned;
-	unsigned char		cluster;
-	unsigned char		discard_zeroes_data;
-};
-
-struct request_queue {
-	/*
-	 * Together with queue_head for cacheline sharing
-	 */
-	struct list_head	queue_head;
-	struct request		*last_merge;
-	struct elevator_queue	*elevator;
-
-	/*
-	 * the queue request freelist, one for reads and one for writes
-	 */
-	struct request_list	rq;
-
-	request_fn_proc		*request_fn;
-	make_request_fn		*make_request_fn;
-	prep_rq_fn		*prep_rq_fn;
-	unprep_rq_fn		*unprep_rq_fn;
-	merge_bvec_fn		*merge_bvec_fn;
-	softirq_done_fn		*softirq_done_fn;
-	rq_timed_out_fn		*rq_timed_out_fn;
-	dma_drain_needed_fn	*dma_drain_needed;
-	lld_busy_fn		*lld_busy_fn;
-
-	/*
-	 * Dispatch queue sorting
-	 */
-	sector_t		end_sector;
-	struct request		*boundary_rq;
-
-	/*
-	 * Delayed queue handling
-	 */
-	struct delayed_work	delay_work;
-
-	struct backing_dev_info	backing_dev_info;
-
-	/*
-	 * The queue owner gets to use this for whatever they like.
-	 * ll_rw_blk doesn't touch it.
-	 */
-	void			*queuedata;
-
-	/*
-	 * various queue flags, see QUEUE_* below
-	 */
-	unsigned long		queue_flags;
-
-	/*
-	 * ida allocated id for this queue.  Used to index queues from
-	 * ioctx.
-	 */
-	int			id;
-
-	/*
-	 * queue needs bounce pages for pages above this limit
-	 */
-	gfp_t			bounce_gfp;
-
-	/*
-	 * protects queue structures from reentrancy. ->__queue_lock should
-	 * _never_ be used directly, it is queue private. always use
-	 * ->queue_lock.
-	 */
-	spinlock_t		__queue_lock;
-	spinlock_t		*queue_lock;
-
-	/*
-	 * queue kobject
-	 */
-	struct kobject kobj;
-
-	/*
-	 * queue settings
-	 */
-	unsigned long		nr_requests;	/* Max # of requests */
-	unsigned int		nr_congestion_on;
-	unsigned int		nr_congestion_off;
-	unsigned int		nr_batching;
-
-	unsigned int		dma_drain_size;
-	void			*dma_drain_buffer;
-	unsigned int		dma_pad_mask;
-	unsigned int		dma_alignment;
-
-	struct blk_queue_tag	*queue_tags;
-	struct list_head	tag_busy_list;
-
-	unsigned int		nr_sorted;
-	unsigned int		in_flight[2];
-
-	unsigned int		rq_timeout;
-	struct timer_list	timeout;
-	struct list_head	timeout_list;
-
-	struct list_head	icq_list;
-
-	struct queue_limits	limits;
-
-	/*
-	 * sg stuff
-	 */
-	unsigned int		sg_timeout;
-	unsigned int		sg_reserved_size;
-	int			node;
-#ifdef CONFIG_BLK_DEV_IO_TRACE
-	struct blk_trace	*blk_trace;
-#endif
-	/*
-	 * for flush operations
-	 */
-	unsigned int		flush_flags;
-	unsigned int		flush_not_queueable:1;
-	unsigned int		flush_queue_delayed:1;
-	unsigned int		flush_pending_idx:1;
-	unsigned int		flush_running_idx:1;
-	unsigned long		flush_pending_since;
-	struct list_head	flush_queue[2];
-	struct list_head	flush_data_in_flight;
-	struct request		flush_rq;
-
-	struct mutex		sysfs_lock;
-
-#if defined(CONFIG_BLK_DEV_BSG)
-	bsg_job_fn		*bsg_job_fn;
-	int			bsg_job_size;
-	struct bsg_class_device bsg_dev;
-#endif
-
-#ifdef CONFIG_BLK_DEV_THROTTLING
-	/* Throttle data */
-	struct throtl_data *td;
-#endif
-};
-
-#define QUEUE_FLAG_QUEUED	1	/* uses generic tag queueing */
-#define QUEUE_FLAG_STOPPED	2	/* queue is stopped */
-#define	QUEUE_FLAG_SYNCFULL	3	/* read queue has been filled */
-#define QUEUE_FLAG_ASYNCFULL	4	/* write queue has been filled */
-#define QUEUE_FLAG_DEAD		5	/* queue being torn down */
-#define QUEUE_FLAG_ELVSWITCH	6	/* don't use elevator, just do FIFO */
-#define QUEUE_FLAG_BIDI		7	/* queue supports bidi requests */
-#define QUEUE_FLAG_NOMERGES     8	/* disable merge attempts */
-#define QUEUE_FLAG_SAME_COMP	9	/* complete on same CPU-group */
-#define QUEUE_FLAG_FAIL_IO     10	/* fake timeout */
-#define QUEUE_FLAG_STACKABLE   11	/* supports request stacking */
-#define QUEUE_FLAG_NONROT      12	/* non-rotational device (SSD) */
-#define QUEUE_FLAG_VIRT        QUEUE_FLAG_NONROT /* paravirt device */
-#define QUEUE_FLAG_IO_STAT     13	/* do IO stats */
-#define QUEUE_FLAG_DISCARD     14	/* supports DISCARD */
-#define QUEUE_FLAG_NOXMERGES   15	/* No extended merges */
-#define QUEUE_FLAG_ADD_RANDOM  16	/* Contributes to random pool */
-#define QUEUE_FLAG_SECDISCARD  17	/* supports SECDISCARD */
-#define QUEUE_FLAG_SAME_FORCE  18	/* force complete on same CPU */
-
-#define QUEUE_FLAG_DEFAULT	((1 << QUEUE_FLAG_IO_STAT) |		\
-				 (1 << QUEUE_FLAG_STACKABLE)	|	\
-				 (1 << QUEUE_FLAG_SAME_COMP)	|	\
-				 (1 << QUEUE_FLAG_ADD_RANDOM))
-
-static inline void queue_lockdep_assert_held(struct request_queue *q)
-{
-	if (q->queue_lock)
-		lockdep_assert_held(q->queue_lock);
-}
-
-static inline void queue_flag_set_unlocked(unsigned int flag,
-					   struct request_queue *q)
-{
-	__set_bit(flag, &q->queue_flags);
-}
-
-static inline int queue_flag_test_and_clear(unsigned int flag,
-					    struct request_queue *q)
-{
-	queue_lockdep_assert_held(q);
-
-	if (test_bit(flag, &q->queue_flags)) {
-		__clear_bit(flag, &q->queue_flags);
-		return 1;
-	}
-
-	return 0;
-}
-
-static inline int queue_flag_test_and_set(unsigned int flag,
-					  struct request_queue *q)
-{
-	queue_lockdep_assert_held(q);
-
-	if (!test_bit(flag, &q->queue_flags)) {
-		__set_bit(flag, &q->queue_flags);
-		return 0;
-	}
-
-	return 1;
-}
-
-static inline void queue_flag_set(unsigned int flag, struct request_queue *q)
-{
-	queue_lockdep_assert_held(q);
-	__set_bit(flag, &q->queue_flags);
-}
-
-static inline void queue_flag_clear_unlocked(unsigned int flag,
-					     struct request_queue *q)
-{
-	__clear_bit(flag, &q->queue_flags);
-}
-
-static inline int queue_in_flight(struct request_queue *q)
-{
-	return q->in_flight[0] + q->in_flight[1];
-}
-
-static inline void queue_flag_clear(unsigned int flag, struct request_queue *q)
-{
-	queue_lockdep_assert_held(q);
-	__clear_bit(flag, &q->queue_flags);
-}
-
-#define blk_queue_tagged(q)	test_bit(QUEUE_FLAG_QUEUED, &(q)->queue_flags)
-#define blk_queue_stopped(q)	test_bit(QUEUE_FLAG_STOPPED, &(q)->queue_flags)
-#define blk_queue_dead(q)	test_bit(QUEUE_FLAG_DEAD, &(q)->queue_flags)
-#define blk_queue_nomerges(q)	test_bit(QUEUE_FLAG_NOMERGES, &(q)->queue_flags)
-#define blk_queue_noxmerges(q)	\
-	test_bit(QUEUE_FLAG_NOXMERGES, &(q)->queue_flags)
-#define blk_queue_nonrot(q)	test_bit(QUEUE_FLAG_NONROT, &(q)->queue_flags)
-#define blk_queue_io_stat(q)	test_bit(QUEUE_FLAG_IO_STAT, &(q)->queue_flags)
-#define blk_queue_add_random(q)	test_bit(QUEUE_FLAG_ADD_RANDOM, &(q)->queue_flags)
-#define blk_queue_stackable(q)	\
-	test_bit(QUEUE_FLAG_STACKABLE, &(q)->queue_flags)
-#define blk_queue_discard(q)	test_bit(QUEUE_FLAG_DISCARD, &(q)->queue_flags)
-#define blk_queue_secdiscard(q)	(blk_queue_discard(q) && \
-	test_bit(QUEUE_FLAG_SECDISCARD, &(q)->queue_flags))
-
-#define blk_noretry_request(rq) \
-	((rq)->cmd_flags & (REQ_FAILFAST_DEV|REQ_FAILFAST_TRANSPORT| \
-			     REQ_FAILFAST_DRIVER))
-
-#define blk_account_rq(rq) \
-	(((rq)->cmd_flags & REQ_STARTED) && \
-	 ((rq)->cmd_type == REQ_TYPE_FS || \
-	  ((rq)->cmd_flags & REQ_DISCARD)))
-
-#define blk_pm_request(rq)	\
-	((rq)->cmd_type == REQ_TYPE_PM_SUSPEND || \
-	 (rq)->cmd_type == REQ_TYPE_PM_RESUME)
-
-#define blk_rq_cpu_valid(rq)	((rq)->cpu != -1)
-#define blk_bidi_rq(rq)		((rq)->next_rq != NULL)
-/* rq->queuelist of dequeued request must be list_empty() */
-#define blk_queued_rq(rq)	(!list_empty(&(rq)->queuelist))
-
-#define list_entry_rq(ptr)	list_entry((ptr), struct request, queuelist)
-
-#define rq_data_dir(rq)		((rq)->cmd_flags & 1)
-
-static inline unsigned int blk_queue_cluster(struct request_queue *q)
-{
-	return q->limits.cluster;
-}
-
-/*
- * We regard a request as sync, if either a read or a sync write
- */
-static inline bool rw_is_sync(unsigned int rw_flags)
-{
-	return !(rw_flags & REQ_WRITE) || (rw_flags & REQ_SYNC);
-}
-
-static inline bool rq_is_sync(struct request *rq)
-{
-	return rw_is_sync(rq->cmd_flags);
-}
-
-static inline int blk_queue_full(struct request_queue *q, int sync)
-{
-	if (sync)
-		return test_bit(QUEUE_FLAG_SYNCFULL, &q->queue_flags);
-	return test_bit(QUEUE_FLAG_ASYNCFULL, &q->queue_flags);
-}
-
-static inline void blk_set_queue_full(struct request_queue *q, int sync)
-{
-	if (sync)
-		queue_flag_set(QUEUE_FLAG_SYNCFULL, q);
-	else
-		queue_flag_set(QUEUE_FLAG_ASYNCFULL, q);
-}
-
-static inline void blk_clear_queue_full(struct request_queue *q, int sync)
-{
-	if (sync)
-		queue_flag_clear(QUEUE_FLAG_SYNCFULL, q);
-	else
-		queue_flag_clear(QUEUE_FLAG_ASYNCFULL, q);
-}
-
-
-/*
- * mergeable request must not have _NOMERGE or _BARRIER bit set, nor may
- * it already be started by driver.
- */
-#define RQ_NOMERGE_FLAGS	\
-	(REQ_NOMERGE | REQ_STARTED | REQ_SOFTBARRIER | REQ_FLUSH | REQ_FUA)
-#define rq_mergeable(rq)	\
-	(!((rq)->cmd_flags & RQ_NOMERGE_FLAGS) && \
-	 (((rq)->cmd_flags & REQ_DISCARD) || \
-	  (rq)->cmd_type == REQ_TYPE_FS))
-
-/*
- * q->prep_rq_fn return values
- */
-#define BLKPREP_OK		0	/* serve it */
-#define BLKPREP_KILL		1	/* fatal error, kill */
-#define BLKPREP_DEFER		2	/* leave on queue */
-
-extern unsigned long blk_max_low_pfn, blk_max_pfn;
-
-/*
- * standard bounce addresses:
- *
- * BLK_BOUNCE_HIGH	: bounce all highmem pages
- * BLK_BOUNCE_ANY	: don't bounce anything
- * BLK_BOUNCE_ISA	: bounce pages above ISA DMA boundary
- */
-
-#if BITS_PER_LONG == 32
-#define BLK_BOUNCE_HIGH		((u64)blk_max_low_pfn << PAGE_SHIFT)
-#else
-#define BLK_BOUNCE_HIGH		-1ULL
-#endif
-#define BLK_BOUNCE_ANY		(-1ULL)
-#define BLK_BOUNCE_ISA		(DMA_BIT_MASK(24))
-
-/*
- * default timeout for SG_IO if none specified
- */
-#define BLK_DEFAULT_SG_TIMEOUT	(60 * HZ)
-#define BLK_MIN_SG_TIMEOUT	(7 * HZ)
-
-#ifdef CONFIG_BOUNCE
-extern int init_emergency_isa_pool(void);
-extern void blk_queue_bounce(struct request_queue *q, struct bio **bio);
-#else
-static inline int init_emergency_isa_pool(void)
-{
-	return 0;
-}
-static inline void blk_queue_bounce(struct request_queue *q, struct bio **bio)
-{
-}
-#endif /* CONFIG_MMU */
-
-struct rq_map_data {
-	struct page **pages;
-	int page_order;
-	int nr_entries;
-	unsigned long offset;
-	int null_mapped;
-	int from_user;
-};
-
-struct req_iterator {
-	int i;
-	struct bio *bio;
-};
-
-/* This should not be used directly - use rq_for_each_segment */
-#define for_each_bio(_bio)		\
-	for (; _bio; _bio = _bio->bi_next)
-#define __rq_for_each_bio(_bio, rq)	\
-	if ((rq->bio))			\
-		for (_bio = (rq)->bio; _bio; _bio = _bio->bi_next)
-
-#define rq_for_each_segment(bvl, _rq, _iter)			\
-	__rq_for_each_bio(_iter.bio, _rq)			\
-		bio_for_each_segment(bvl, _iter.bio, _iter.i)
-
-#define rq_iter_last(rq, _iter)					\
-		(_iter.bio->bi_next == NULL && _iter.i == _iter.bio->bi_vcnt-1)
-
-#ifndef ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE
-# error	"You should define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE for your platform"
-#endif
-#if ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE
-extern void rq_flush_dcache_pages(struct request *rq);
-#else
-static inline void rq_flush_dcache_pages(struct request *rq)
-{
-}
-#endif
-
-extern int blk_register_queue(struct gendisk *disk);
-extern void blk_unregister_queue(struct gendisk *disk);
-extern void generic_make_request(struct bio *bio);
-extern void blk_rq_init(struct request_queue *q, struct request *rq);
-extern void blk_put_request(struct request *);
-extern void __blk_put_request(struct request_queue *, struct request *);
-extern struct request *blk_get_request(struct request_queue *, int, gfp_t);
-extern struct request *blk_make_request(struct request_queue *, struct bio *,
-					gfp_t);
-extern void blk_requeue_request(struct request_queue *, struct request *);
-extern void blk_add_request_payload(struct request *rq, struct page *page,
-		unsigned int len);
-extern int blk_rq_check_limits(struct request_queue *q, struct request *rq);
-extern int blk_lld_busy(struct request_queue *q);
-extern int blk_rq_prep_clone(struct request *rq, struct request *rq_src,
-			     struct bio_set *bs, gfp_t gfp_mask,
-			     int (*bio_ctr)(struct bio *, struct bio *, void *),
-			     void *data);
-extern void blk_rq_unprep_clone(struct request *rq);
-extern int blk_insert_cloned_request(struct request_queue *q,
-				     struct request *rq);
-extern void blk_delay_queue(struct request_queue *, unsigned long);
-extern void blk_recount_segments(struct request_queue *, struct bio *);
-extern int scsi_verify_blk_ioctl(struct block_device *, unsigned int);
-extern int scsi_cmd_blk_ioctl(struct block_device *, fmode_t,
-			      unsigned int, void __user *);
-extern int scsi_cmd_ioctl(struct request_queue *, struct gendisk *, fmode_t,
-			  unsigned int, void __user *);
-extern int sg_scsi_ioctl(struct request_queue *, struct gendisk *, fmode_t,
-			 struct scsi_ioctl_command __user *);
-
-extern void blk_queue_bio(struct request_queue *q, struct bio *bio);
-
-/*
- * A queue has just exitted congestion.  Note this in the global counter of
- * congested queues, and wake up anyone who was waiting for requests to be
- * put back.
- */
-static inline void blk_clear_queue_congested(struct request_queue *q, int sync)
-{
-	clear_bdi_congested(&q->backing_dev_info, sync);
-}
-
-/*
- * A queue has just entered congestion.  Flag that in the queue's VM-visible
- * state flags and increment the global gounter of congested queues.
- */
-static inline void blk_set_queue_congested(struct request_queue *q, int sync)
-{
-	set_bdi_congested(&q->backing_dev_info, sync);
-}
-
-extern void blk_start_queue(struct request_queue *q);
-extern void blk_stop_queue(struct request_queue *q);
-extern void blk_sync_queue(struct request_queue *q);
-extern void __blk_stop_queue(struct request_queue *q);
-extern void __blk_run_queue(struct request_queue *q);
-extern void blk_run_queue(struct request_queue *);
-extern void blk_run_queue_async(struct request_queue *q);
-extern int blk_rq_map_user(struct request_queue *, struct request *,
-			   struct rq_map_data *, void __user *, unsigned long,
-			   gfp_t);
-extern int blk_rq_unmap_user(struct bio *);
-extern int blk_rq_map_kern(struct request_queue *, struct request *, void *, unsigned int, gfp_t);
-extern int blk_rq_map_user_iov(struct request_queue *, struct request *,
-			       struct rq_map_data *, struct sg_iovec *, int,
-			       unsigned int, gfp_t);
-extern int blk_execute_rq(struct request_queue *, struct gendisk *,
-			  struct request *, int);
-extern void blk_execute_rq_nowait(struct request_queue *, struct gendisk *,
-				  struct request *, int, rq_end_io_fn *);
-
-static inline struct request_queue *bdev_get_queue(struct block_device *bdev)
-{
-	return bdev->bd_disk->queue;
-}
-
-/*
- * blk_rq_pos()			: the current sector
- * blk_rq_bytes()		: bytes left in the entire request
- * blk_rq_cur_bytes()		: bytes left in the current segment
- * blk_rq_err_bytes()		: bytes left till the next error boundary
- * blk_rq_sectors()		: sectors left in the entire request
- * blk_rq_cur_sectors()		: sectors left in the current segment
- */
-static inline sector_t blk_rq_pos(const struct request *rq)
-{
-	return rq->__sector;
-}
-
-static inline unsigned int blk_rq_bytes(const struct request *rq)
-{
-	return rq->__data_len;
-}
-
-static inline int blk_rq_cur_bytes(const struct request *rq)
-{
-	return rq->bio ? bio_cur_bytes(rq->bio) : 0;
-}
-
-extern unsigned int blk_rq_err_bytes(const struct request *rq);
-
-static inline unsigned int blk_rq_sectors(const struct request *rq)
-{
-	return blk_rq_bytes(rq) >> 9;
-}
-
-static inline unsigned int blk_rq_cur_sectors(const struct request *rq)
-{
-	return blk_rq_cur_bytes(rq) >> 9;
-}
-
-/*
- * Request issue related functions.
- */
-extern struct request *blk_peek_request(struct request_queue *q);
-extern void blk_start_request(struct request *rq);
-extern struct request *blk_fetch_request(struct request_queue *q);
-
-/*
- * Request completion related functions.
- *
- * blk_update_request() completes given number of bytes and updates
- * the request without completing it.
- *
- * blk_end_request() and friends.  __blk_end_request() must be called
- * with the request queue spinlock acquired.
- *
- * Several drivers define their own end_request and call
- * blk_end_request() for parts of the original function.
- * This prevents code duplication in drivers.
- */
-extern bool blk_update_request(struct request *rq, int error,
-			       unsigned int nr_bytes);
-extern bool blk_end_request(struct request *rq, int error,
-			    unsigned int nr_bytes);
-extern void blk_end_request_all(struct request *rq, int error);
-extern bool blk_end_request_cur(struct request *rq, int error);
-extern bool blk_end_request_err(struct request *rq, int error);
-extern bool __blk_end_request(struct request *rq, int error,
-			      unsigned int nr_bytes);
-extern void __blk_end_request_all(struct request *rq, int error);
-extern bool __blk_end_request_cur(struct request *rq, int error);
-extern bool __blk_end_request_err(struct request *rq, int error);
-
-extern void blk_complete_request(struct request *);
-extern void __blk_complete_request(struct request *);
-extern void blk_abort_request(struct request *);
-extern void blk_abort_queue(struct request_queue *);
-extern void blk_unprep_request(struct request *);
-
-/*
- * Access functions for manipulating queue properties
- */
-extern struct request_queue *blk_init_queue_node(request_fn_proc *rfn,
-					spinlock_t *lock, int node_id);
-extern struct request_queue *blk_init_queue(request_fn_proc *, spinlock_t *);
-extern struct request_queue *blk_init_allocated_queue(struct request_queue *,
-						      request_fn_proc *, spinlock_t *);
-extern void blk_cleanup_queue(struct request_queue *);
-extern void blk_queue_make_request(struct request_queue *, make_request_fn *);
-extern void blk_queue_bounce_limit(struct request_queue *, u64);
-extern void blk_limits_max_hw_sectors(struct queue_limits *, unsigned int);
-extern void blk_queue_max_hw_sectors(struct request_queue *, unsigned int);
-extern void blk_queue_max_segments(struct request_queue *, unsigned short);
-extern void blk_queue_max_segment_size(struct request_queue *, unsigned int);
-extern void blk_queue_max_discard_sectors(struct request_queue *q,
-		unsigned int max_discard_sectors);
-extern void blk_queue_logical_block_size(struct request_queue *, unsigned short);
-extern void blk_queue_physical_block_size(struct request_queue *, unsigned int);
-extern void blk_queue_alignment_offset(struct request_queue *q,
-				       unsigned int alignment);
-extern void blk_limits_io_min(struct queue_limits *limits, unsigned int min);
-extern void blk_queue_io_min(struct request_queue *q, unsigned int min);
-extern void blk_limits_io_opt(struct queue_limits *limits, unsigned int opt);
-extern void blk_queue_io_opt(struct request_queue *q, unsigned int opt);
-extern void blk_set_default_limits(struct queue_limits *lim);
-extern void blk_set_stacking_limits(struct queue_limits *lim);
-extern int blk_stack_limits(struct queue_limits *t, struct queue_limits *b,
-			    sector_t offset);
-extern int bdev_stack_limits(struct queue_limits *t, struct block_device *bdev,
-			    sector_t offset);
-extern void disk_stack_limits(struct gendisk *disk, struct block_device *bdev,
-			      sector_t offset);
-extern void blk_queue_stack_limits(struct request_queue *t, struct request_queue *b);
-extern void blk_queue_dma_pad(struct request_queue *, unsigned int);
-extern void blk_queue_update_dma_pad(struct request_queue *, unsigned int);
-extern int blk_queue_dma_drain(struct request_queue *q,
-			       dma_drain_needed_fn *dma_drain_needed,
-			       void *buf, unsigned int size);
-extern void blk_queue_lld_busy(struct request_queue *q, lld_busy_fn *fn);
-extern void blk_queue_segment_boundary(struct request_queue *, unsigned long);
-extern void blk_queue_prep_rq(struct request_queue *, prep_rq_fn *pfn);
-extern void blk_queue_unprep_rq(struct request_queue *, unprep_rq_fn *ufn);
-extern void blk_queue_merge_bvec(struct request_queue *, merge_bvec_fn *);
-extern void blk_queue_dma_alignment(struct request_queue *, int);
-extern void blk_queue_update_dma_alignment(struct request_queue *, int);
-extern void blk_queue_softirq_done(struct request_queue *, softirq_done_fn *);
-extern void blk_queue_rq_timed_out(struct request_queue *, rq_timed_out_fn *);
-extern void blk_queue_rq_timeout(struct request_queue *, unsigned int);
-extern void blk_queue_flush(struct request_queue *q, unsigned int flush);
-extern void blk_queue_flush_queueable(struct request_queue *q, bool queueable);
-extern struct backing_dev_info *blk_get_backing_dev_info(struct block_device *bdev);
-
-extern int blk_rq_map_sg(struct request_queue *, struct request *, struct scatterlist *);
-extern void blk_dump_rq_flags(struct request *, char *);
-extern long nr_blockdev_pages(void);
-
-bool __must_check blk_get_queue(struct request_queue *);
-struct request_queue *blk_alloc_queue(gfp_t);
-struct request_queue *blk_alloc_queue_node(gfp_t, int);
-extern void blk_put_queue(struct request_queue *);
-
-/*
- * blk_plug permits building a queue of related requests by holding the I/O
- * fragments for a short period. This allows merging of sequential requests
- * into single larger request. As the requests are moved from a per-task list to
- * the device's request_queue in a batch, this results in improved scalability
- * as the lock contention for request_queue lock is reduced.
- *
- * It is ok not to disable preemption when adding the request to the plug list
- * or when attempting a merge, because blk_schedule_flush_list() will only flush
- * the plug list when the task sleeps by itself. For details, please see
- * schedule() where blk_schedule_flush_plug() is called.
- */
-struct blk_plug {
-	unsigned long magic; /* detect uninitialized use-cases */
-	struct list_head list; /* requests */
-	struct list_head cb_list; /* md requires an unplug callback */
-	unsigned int should_sort; /* list to be sorted before flushing? */
-};
-#define BLK_MAX_REQUEST_COUNT 16
-
-struct blk_plug_cb {
-	struct list_head list;
-	void (*callback)(struct blk_plug_cb *);
-};
-
-extern void blk_start_plug(struct blk_plug *);
-extern void blk_finish_plug(struct blk_plug *);
-extern void blk_flush_plug_list(struct blk_plug *, bool);
-
-static inline void blk_flush_plug(struct task_struct *tsk)
-{
-	struct blk_plug *plug = tsk->plug;
-
-	if (plug)
-		blk_flush_plug_list(plug, false);
-}
-
-static inline void blk_schedule_flush_plug(struct task_struct *tsk)
-{
-	struct blk_plug *plug = tsk->plug;
-
-	if (plug)
-		blk_flush_plug_list(plug, true);
-}
-
-static inline bool blk_needs_flush_plug(struct task_struct *tsk)
-{
-	struct blk_plug *plug = tsk->plug;
-
-	return plug && (!list_empty(&plug->list) || !list_empty(&plug->cb_list));
-}
-
-/*
- * tag stuff
- */
-#define blk_rq_tagged(rq)		((rq)->cmd_flags & REQ_QUEUED)
-extern int blk_queue_start_tag(struct request_queue *, struct request *);
-extern struct request *blk_queue_find_tag(struct request_queue *, int);
-extern void blk_queue_end_tag(struct request_queue *, struct request *);
-extern int blk_queue_init_tags(struct request_queue *, int, struct blk_queue_tag *);
-extern void blk_queue_free_tags(struct request_queue *);
-extern int blk_queue_resize_tags(struct request_queue *, int);
-extern void blk_queue_invalidate_tags(struct request_queue *);
-extern struct blk_queue_tag *blk_init_tags(int);
-extern void blk_free_tags(struct blk_queue_tag *);
-
-static inline struct request *blk_map_queue_find_tag(struct blk_queue_tag *bqt,
-						int tag)
-{
-	if (unlikely(bqt == NULL || tag >= bqt->real_max_depth))
-		return NULL;
-	return bqt->tag_index[tag];
-}
-
-#define BLKDEV_DISCARD_SECURE  0x01    /* secure discard */
-
-extern int blkdev_issue_flush(struct block_device *, gfp_t, sector_t *);
-extern int blkdev_issue_discard(struct block_device *bdev, sector_t sector,
-		sector_t nr_sects, gfp_t gfp_mask, unsigned long flags);
-extern int blkdev_issue_zeroout(struct block_device *bdev, sector_t sector,
-			sector_t nr_sects, gfp_t gfp_mask);
-static inline int sb_issue_discard(struct super_block *sb, sector_t block,
-		sector_t nr_blocks, gfp_t gfp_mask, unsigned long flags)
-{
-	return blkdev_issue_discard(sb->s_bdev, block << (sb->s_blocksize_bits - 9),
-				    nr_blocks << (sb->s_blocksize_bits - 9),
-				    gfp_mask, flags);
-}
-static inline int sb_issue_zeroout(struct super_block *sb, sector_t block,
-		sector_t nr_blocks, gfp_t gfp_mask)
-{
-	return blkdev_issue_zeroout(sb->s_bdev,
-				    block << (sb->s_blocksize_bits - 9),
-				    nr_blocks << (sb->s_blocksize_bits - 9),
-				    gfp_mask);
-}
-
-extern int blk_verify_command(unsigned char *cmd, fmode_t has_write_perm);
-
-enum blk_default_limits {
-	BLK_MAX_SEGMENTS	= 128,
-	BLK_SAFE_MAX_SECTORS	= 255,
-	BLK_DEF_MAX_SECTORS	= 1024,
-	BLK_MAX_SEGMENT_SIZE	= 65536,
-	BLK_SEG_BOUNDARY_MASK	= 0xFFFFFFFFUL,
-};
-
-#define blkdev_entry_to_request(entry) list_entry((entry), struct request, queuelist)
-
-static inline unsigned long queue_bounce_pfn(struct request_queue *q)
-{
-	return q->limits.bounce_pfn;
-}
-
-static inline unsigned long queue_segment_boundary(struct request_queue *q)
-{
-	return q->limits.seg_boundary_mask;
-}
-
-static inline unsigned int queue_max_sectors(struct request_queue *q)
-{
-	return q->limits.max_sectors;
-}
-
-static inline unsigned int queue_max_hw_sectors(struct request_queue *q)
-{
-	return q->limits.max_hw_sectors;
-}
-
-static inline unsigned short queue_max_segments(struct request_queue *q)
-{
-	return q->limits.max_segments;
-}
-
-static inline unsigned int queue_max_segment_size(struct request_queue *q)
-{
-	return q->limits.max_segment_size;
-}
-
-static inline unsigned short queue_logical_block_size(struct request_queue *q)
-{
-	int retval = 512;
-
-	if (q && q->limits.logical_block_size)
-		retval = q->limits.logical_block_size;
-
-	return retval;
-}
-
-static inline unsigned short bdev_logical_block_size(struct block_device *bdev)
-{
-	return queue_logical_block_size(bdev_get_queue(bdev));
-}
-
-static inline unsigned int queue_physical_block_size(struct request_queue *q)
-{
-	return q->limits.physical_block_size;
-}
-
-static inline unsigned int bdev_physical_block_size(struct block_device *bdev)
-{
-	return queue_physical_block_size(bdev_get_queue(bdev));
-}
-
-static inline unsigned int queue_io_min(struct request_queue *q)
-{
-	return q->limits.io_min;
-}
-
-static inline int bdev_io_min(struct block_device *bdev)
-{
-	return queue_io_min(bdev_get_queue(bdev));
-}
-
-static inline unsigned int queue_io_opt(struct request_queue *q)
-{
-	return q->limits.io_opt;
-}
-
-static inline int bdev_io_opt(struct block_device *bdev)
-{
-	return queue_io_opt(bdev_get_queue(bdev));
-}
-
-static inline int queue_alignment_offset(struct request_queue *q)
-{
-	if (q->limits.misaligned)
-		return -1;
-
-	return q->limits.alignment_offset;
-}
-
-static inline int queue_limit_alignment_offset(struct queue_limits *lim, sector_t sector)
-{
-	unsigned int granularity = max(lim->physical_block_size, lim->io_min);
-	unsigned int alignment = (sector << 9) & (granularity - 1);
-
-	return (granularity + lim->alignment_offset - alignment)
-		& (granularity - 1);
-}
-
-static inline int bdev_alignment_offset(struct block_device *bdev)
-{
-	struct request_queue *q = bdev_get_queue(bdev);
-
-	if (q->limits.misaligned)
-		return -1;
-
-	if (bdev != bdev->bd_contains)
-		return bdev->bd_part->alignment_offset;
-
-	return q->limits.alignment_offset;
-}
-
-static inline int queue_discard_alignment(struct request_queue *q)
-{
-	if (q->limits.discard_misaligned)
-		return -1;
-
-	return q->limits.discard_alignment;
-}
-
-static inline int queue_limit_discard_alignment(struct queue_limits *lim, sector_t sector)
-{
-	unsigned int alignment = (sector << 9) & (lim->discard_granularity - 1);
-
-	if (!lim->max_discard_sectors)
-		return 0;
-
-	return (lim->discard_granularity + lim->discard_alignment - alignment)
-		& (lim->discard_granularity - 1);
-}
-
-static inline unsigned int queue_discard_zeroes_data(struct request_queue *q)
-{
-	if (q->limits.max_discard_sectors && q->limits.discard_zeroes_data == 1)
-		return 1;
-
-	return 0;
-}
-
-static inline unsigned int bdev_discard_zeroes_data(struct block_device *bdev)
-{
-	return queue_discard_zeroes_data(bdev_get_queue(bdev));
-}
-
-static inline int queue_dma_alignment(struct request_queue *q)
-{
-	return q ? q->dma_alignment : 511;
-}
-
-static inline int blk_rq_aligned(struct request_queue *q, unsigned long addr,
-				 unsigned int len)
-{
-	unsigned int alignment = queue_dma_alignment(q) | q->dma_pad_mask;
-	return !(addr & alignment) && !(len & alignment);
-}
-
-/* assumes size > 256 */
-static inline unsigned int blksize_bits(unsigned int size)
-{
-	unsigned int bits = 8;
-	do {
-		bits++;
-		size >>= 1;
-	} while (size > 256);
-	return bits;
-}
-
-static inline unsigned int block_size(struct block_device *bdev)
-{
-	return bdev->bd_block_size;
-}
-
-static inline bool queue_flush_queueable(struct request_queue *q)
-{
-	return !q->flush_not_queueable;
-}
-
-typedef struct {struct page *v;} Sector;
-
-unsigned char *read_dev_sector(struct block_device *, sector_t, Sector *);
-
-static inline void put_dev_sector(Sector p)
-{
-	page_cache_release(p.v);
-}
-
-struct work_struct;
-int kblockd_schedule_work(struct request_queue *q, struct work_struct *work);
-
-#ifdef CONFIG_BLK_CGROUP
-/*
- * This should not be using sched_clock(). A real patch is in progress
- * to fix this up, until that is in place we need to disable preemption
- * around sched_clock() in this function and set_io_start_time_ns().
- */
-static inline void set_start_time_ns(struct request *req)
-{
-	preempt_disable();
-	req->start_time_ns = sched_clock();
-	preempt_enable();
-}
-
-static inline void set_io_start_time_ns(struct request *req)
-{
-	preempt_disable();
-	req->io_start_time_ns = sched_clock();
-	preempt_enable();
-}
-
-static inline uint64_t rq_start_time_ns(struct request *req)
-{
-        return req->start_time_ns;
-}
-
-static inline uint64_t rq_io_start_time_ns(struct request *req)
-{
-        return req->io_start_time_ns;
-}
-#else
-static inline void set_start_time_ns(struct request *req) {}
-static inline void set_io_start_time_ns(struct request *req) {}
-static inline uint64_t rq_start_time_ns(struct request *req)
-{
-	return 0;
-}
-static inline uint64_t rq_io_start_time_ns(struct request *req)
-{
-	return 0;
-}
-#endif
-
-#define MODULE_ALIAS_BLOCKDEV(major,minor) \
-	MODULE_ALIAS("block-major-" __stringify(major) "-" __stringify(minor))
-#define MODULE_ALIAS_BLOCKDEV_MAJOR(major) \
-	MODULE_ALIAS("block-major-" __stringify(major) "-*")
-
-#if defined(CONFIG_BLK_DEV_INTEGRITY)
-
-#define INTEGRITY_FLAG_READ	2	/* verify data integrity on read */
-#define INTEGRITY_FLAG_WRITE	4	/* generate data integrity on write */
-
-struct blk_integrity_exchg {
-	void			*prot_buf;
-	void			*data_buf;
-	sector_t		sector;
-	unsigned int		data_size;
-	unsigned short		sector_size;
-	const char		*disk_name;
-};
-
-typedef void (integrity_gen_fn) (struct blk_integrity_exchg *);
-typedef int (integrity_vrfy_fn) (struct blk_integrity_exchg *);
-typedef void (integrity_set_tag_fn) (void *, void *, unsigned int);
-typedef void (integrity_get_tag_fn) (void *, void *, unsigned int);
-
-struct blk_integrity {
-	integrity_gen_fn	*generate_fn;
-	integrity_vrfy_fn	*verify_fn;
-	integrity_set_tag_fn	*set_tag_fn;
-	integrity_get_tag_fn	*get_tag_fn;
-
-	unsigned short		flags;
-	unsigned short		tuple_size;
-	unsigned short		sector_size;
-	unsigned short		tag_size;
-
-	const char		*name;
-
-	struct kobject		kobj;
-};
-
-extern bool blk_integrity_is_initialized(struct gendisk *);
-extern int blk_integrity_register(struct gendisk *, struct blk_integrity *);
-extern void blk_integrity_unregister(struct gendisk *);
-extern int blk_integrity_compare(struct gendisk *, struct gendisk *);
-extern int blk_rq_map_integrity_sg(struct request_queue *, struct bio *,
-				   struct scatterlist *);
-extern int blk_rq_count_integrity_sg(struct request_queue *, struct bio *);
-extern int blk_integrity_merge_rq(struct request_queue *, struct request *,
-				  struct request *);
-extern int blk_integrity_merge_bio(struct request_queue *, struct request *,
-				   struct bio *);
-
-static inline
-struct blk_integrity *bdev_get_integrity(struct block_device *bdev)
-{
-	return bdev->bd_disk->integrity;
-}
-
-static inline struct blk_integrity *blk_get_integrity(struct gendisk *disk)
-{
-	return disk->integrity;
-}
-
-static inline int blk_integrity_rq(struct request *rq)
-{
-	if (rq->bio == NULL)
-		return 0;
-
-	return bio_integrity(rq->bio);
-}
-
-static inline void blk_queue_max_integrity_segments(struct request_queue *q,
-						    unsigned int segs)
-{
-	q->limits.max_integrity_segments = segs;
-}
-
-static inline unsigned short
-queue_max_integrity_segments(struct request_queue *q)
-{
-	return q->limits.max_integrity_segments;
-}
-
-#else /* CONFIG_BLK_DEV_INTEGRITY */
-
-struct bio;
-struct block_device;
-struct gendisk;
-struct blk_integrity;
-
-static inline int blk_integrity_rq(struct request *rq)
-{
-	return 0;
-}
-static inline int blk_rq_count_integrity_sg(struct request_queue *q,
-					    struct bio *b)
-{
-	return 0;
-}
-static inline int blk_rq_map_integrity_sg(struct request_queue *q,
-					  struct bio *b,
-					  struct scatterlist *s)
-{
-	return 0;
-}
-static inline struct blk_integrity *bdev_get_integrity(struct block_device *b)
-{
-	return 0;
-}
-static inline struct blk_integrity *blk_get_integrity(struct gendisk *disk)
-{
-	return NULL;
-}
-static inline int blk_integrity_compare(struct gendisk *a, struct gendisk *b)
-{
-	return 0;
-}
-static inline int blk_integrity_register(struct gendisk *d,
-					 struct blk_integrity *b)
-{
-	return 0;
-}
-static inline void blk_integrity_unregister(struct gendisk *d)
-{
-}
-static inline void blk_queue_max_integrity_segments(struct request_queue *q,
-						    unsigned int segs)
-{
-}
-static inline unsigned short queue_max_integrity_segments(struct request_queue *q)
-{
-	return 0;
-}
-static inline int blk_integrity_merge_rq(struct request_queue *rq,
-					 struct request *r1,
-					 struct request *r2)
-{
-	return 0;
-}
-static inline int blk_integrity_merge_bio(struct request_queue *rq,
-					  struct request *r,
-					  struct bio *b)
-{
-	return 0;
-}
-static inline bool blk_integrity_is_initialized(struct gendisk *g)
-{
-	return 0;
-}
-
-#endif /* CONFIG_BLK_DEV_INTEGRITY */
-
-struct block_device_operations {
-	int (*open) (struct block_device *, fmode_t);
-	int (*release) (struct gendisk *, fmode_t);
-	int (*ioctl) (struct block_device *, fmode_t, unsigned, unsigned long);
-	int (*compat_ioctl) (struct block_device *, fmode_t, unsigned, unsigned long);
-	int (*direct_access) (struct block_device *, sector_t,
-						void **, unsigned long *);
-	unsigned int (*check_events) (struct gendisk *disk,
-				      unsigned int clearing);
-	/* ->media_changed() is DEPRECATED, use ->check_events() instead */
-	int (*media_changed) (struct gendisk *);
-	void (*unlock_native_capacity) (struct gendisk *);
-	int (*revalidate_disk) (struct gendisk *);
-	int (*getgeo)(struct block_device *, struct hd_geometry *);
-	/* this callback is with swap_lock and sometimes page table lock held */
-	void (*swap_slot_free_notify) (struct block_device *, unsigned long);
-	struct module *owner;
-};
-
-extern int __blkdev_driver_ioctl(struct block_device *, fmode_t, unsigned int,
-				 unsigned long);
-#else /* CONFIG_BLOCK */
-/*
- * stubs for when the block layer is configured out
- */
-#define buffer_heads_over_limit 0
-
-static inline long nr_blockdev_pages(void)
-{
-	return 0;
-}
-
-struct blk_plug {
-};
-
-static inline void blk_start_plug(struct blk_plug *plug)
-{
-}
-
-static inline void blk_finish_plug(struct blk_plug *plug)
-{
-}
-
-static inline void blk_flush_plug(struct task_struct *task)
-{
-}
-
-static inline void blk_schedule_flush_plug(struct task_struct *task)
-{
-}
-
-
-static inline bool blk_needs_flush_plug(struct task_struct *tsk)
-{
-	return false;
-}
-
-#endif /* CONFIG_BLOCK */
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/blkpg.h b/ANDROID_3.4.5/include/linux/blkpg.h
deleted file mode 100644
index faf8a45a..00000000
--- a/ANDROID_3.4.5/include/linux/blkpg.h
+++ /dev/null
@@ -1,58 +0,0 @@
-#ifndef _LINUX_BLKPG_H
-#define _LINUX_BLKPG_H
-
-/*
- * Partition table and disk geometry handling
- *
- * A single ioctl with lots of subfunctions:
- *
- * Device number stuff:
- *    get_whole_disk()		(given the device number of a partition,
- *                               find the device number of the encompassing disk)
- *    get_all_partitions()	(given the device number of a disk, return the
- *				 device numbers of all its known partitions)
- *
- * Partition stuff:
- *    add_partition()
- *    delete_partition()
- *    test_partition_in_use()	(also for test_disk_in_use)
- *
- * Geometry stuff:
- *    get_geometry()
- *    set_geometry()
- *    get_bios_drivedata()
- *
- * For today, only the partition stuff - aeb, 990515
- */
-#include <linux/compiler.h>
-#include <linux/ioctl.h>
-
-#define BLKPG      _IO(0x12,105)
-
-/* The argument structure */
-struct blkpg_ioctl_arg {
-        int op;
-        int flags;
-        int datalen;
-        void __user *data;
-};
-
-/* The subfunctions (for the op field) */
-#define BLKPG_ADD_PARTITION	1
-#define BLKPG_DEL_PARTITION	2
-
-/* Sizes of name fields. Unused at present. */
-#define BLKPG_DEVNAMELTH	64
-#define BLKPG_VOLNAMELTH	64
-
-/* The data structure for ADD_PARTITION and DEL_PARTITION */
-struct blkpg_partition {
-	long long start;		/* starting offset in bytes */
-	long long length;		/* length in bytes */
-	int pno;			/* partition number */
-	char devname[BLKPG_DEVNAMELTH];	/* partition name, like sda5 or c0d1p2,
-					   to be used in kernel messages */
-	char volname[BLKPG_VOLNAMELTH];	/* volume label */
-};
-
-#endif /* _LINUX_BLKPG_H */
diff --git a/ANDROID_3.4.5/include/linux/blktrace_api.h b/ANDROID_3.4.5/include/linux/blktrace_api.h
deleted file mode 100644
index 4d1a0748..00000000
--- a/ANDROID_3.4.5/include/linux/blktrace_api.h
+++ /dev/null
@@ -1,254 +0,0 @@
-#ifndef BLKTRACE_H
-#define BLKTRACE_H
-
-#include <linux/types.h>
-#ifdef __KERNEL__
-#include <linux/blkdev.h>
-#include <linux/relay.h>
-#include <linux/compat.h>
-#endif
-
-/*
- * Trace categories
- */
-enum blktrace_cat {
-	BLK_TC_READ	= 1 << 0,	/* reads */
-	BLK_TC_WRITE	= 1 << 1,	/* writes */
-	BLK_TC_FLUSH	= 1 << 2,	/* flush */
-	BLK_TC_SYNC	= 1 << 3,	/* sync IO */
-	BLK_TC_SYNCIO	= BLK_TC_SYNC,
-	BLK_TC_QUEUE	= 1 << 4,	/* queueing/merging */
-	BLK_TC_REQUEUE	= 1 << 5,	/* requeueing */
-	BLK_TC_ISSUE	= 1 << 6,	/* issue */
-	BLK_TC_COMPLETE	= 1 << 7,	/* completions */
-	BLK_TC_FS	= 1 << 8,	/* fs requests */
-	BLK_TC_PC	= 1 << 9,	/* pc requests */
-	BLK_TC_NOTIFY	= 1 << 10,	/* special message */
-	BLK_TC_AHEAD	= 1 << 11,	/* readahead */
-	BLK_TC_META	= 1 << 12,	/* metadata */
-	BLK_TC_DISCARD	= 1 << 13,	/* discard requests */
-	BLK_TC_DRV_DATA	= 1 << 14,	/* binary per-driver data */
-	BLK_TC_FUA	= 1 << 15,	/* fua requests */
-
-	BLK_TC_END	= 1 << 15,	/* we've run out of bits! */
-};
-
-#define BLK_TC_SHIFT		(16)
-#define BLK_TC_ACT(act)		((act) << BLK_TC_SHIFT)
-
-/*
- * Basic trace actions
- */
-enum blktrace_act {
-	__BLK_TA_QUEUE = 1,		/* queued */
-	__BLK_TA_BACKMERGE,		/* back merged to existing rq */
-	__BLK_TA_FRONTMERGE,		/* front merge to existing rq */
-	__BLK_TA_GETRQ,			/* allocated new request */
-	__BLK_TA_SLEEPRQ,		/* sleeping on rq allocation */
-	__BLK_TA_REQUEUE,		/* request requeued */
-	__BLK_TA_ISSUE,			/* sent to driver */
-	__BLK_TA_COMPLETE,		/* completed by driver */
-	__BLK_TA_PLUG,			/* queue was plugged */
-	__BLK_TA_UNPLUG_IO,		/* queue was unplugged by io */
-	__BLK_TA_UNPLUG_TIMER,		/* queue was unplugged by timer */
-	__BLK_TA_INSERT,		/* insert request */
-	__BLK_TA_SPLIT,			/* bio was split */
-	__BLK_TA_BOUNCE,		/* bio was bounced */
-	__BLK_TA_REMAP,			/* bio was remapped */
-	__BLK_TA_ABORT,			/* request aborted */
-	__BLK_TA_DRV_DATA,		/* driver-specific binary data */
-};
-
-/*
- * Notify events.
- */
-enum blktrace_notify {
-	__BLK_TN_PROCESS = 0,		/* establish pid/name mapping */
-	__BLK_TN_TIMESTAMP,		/* include system clock */
-	__BLK_TN_MESSAGE,		/* Character string message */
-};
-
-
-/*
- * Trace actions in full. Additionally, read or write is masked
- */
-#define BLK_TA_QUEUE		(__BLK_TA_QUEUE | BLK_TC_ACT(BLK_TC_QUEUE))
-#define BLK_TA_BACKMERGE	(__BLK_TA_BACKMERGE | BLK_TC_ACT(BLK_TC_QUEUE))
-#define BLK_TA_FRONTMERGE	(__BLK_TA_FRONTMERGE | BLK_TC_ACT(BLK_TC_QUEUE))
-#define	BLK_TA_GETRQ		(__BLK_TA_GETRQ | BLK_TC_ACT(BLK_TC_QUEUE))
-#define	BLK_TA_SLEEPRQ		(__BLK_TA_SLEEPRQ | BLK_TC_ACT(BLK_TC_QUEUE))
-#define	BLK_TA_REQUEUE		(__BLK_TA_REQUEUE | BLK_TC_ACT(BLK_TC_REQUEUE))
-#define BLK_TA_ISSUE		(__BLK_TA_ISSUE | BLK_TC_ACT(BLK_TC_ISSUE))
-#define BLK_TA_COMPLETE		(__BLK_TA_COMPLETE| BLK_TC_ACT(BLK_TC_COMPLETE))
-#define BLK_TA_PLUG		(__BLK_TA_PLUG | BLK_TC_ACT(BLK_TC_QUEUE))
-#define BLK_TA_UNPLUG_IO	(__BLK_TA_UNPLUG_IO | BLK_TC_ACT(BLK_TC_QUEUE))
-#define BLK_TA_UNPLUG_TIMER	(__BLK_TA_UNPLUG_TIMER | BLK_TC_ACT(BLK_TC_QUEUE))
-#define BLK_TA_INSERT		(__BLK_TA_INSERT | BLK_TC_ACT(BLK_TC_QUEUE))
-#define BLK_TA_SPLIT		(__BLK_TA_SPLIT)
-#define BLK_TA_BOUNCE		(__BLK_TA_BOUNCE)
-#define BLK_TA_REMAP		(__BLK_TA_REMAP | BLK_TC_ACT(BLK_TC_QUEUE))
-#define BLK_TA_ABORT		(__BLK_TA_ABORT | BLK_TC_ACT(BLK_TC_QUEUE))
-#define BLK_TA_DRV_DATA	(__BLK_TA_DRV_DATA | BLK_TC_ACT(BLK_TC_DRV_DATA))
-
-#define BLK_TN_PROCESS		(__BLK_TN_PROCESS | BLK_TC_ACT(BLK_TC_NOTIFY))
-#define BLK_TN_TIMESTAMP	(__BLK_TN_TIMESTAMP | BLK_TC_ACT(BLK_TC_NOTIFY))
-#define BLK_TN_MESSAGE		(__BLK_TN_MESSAGE | BLK_TC_ACT(BLK_TC_NOTIFY))
-
-#define BLK_IO_TRACE_MAGIC	0x65617400
-#define BLK_IO_TRACE_VERSION	0x07
-
-/*
- * The trace itself
- */
-struct blk_io_trace {
-	__u32 magic;		/* MAGIC << 8 | version */
-	__u32 sequence;		/* event number */
-	__u64 time;		/* in microseconds */
-	__u64 sector;		/* disk offset */
-	__u32 bytes;		/* transfer length */
-	__u32 action;		/* what happened */
-	__u32 pid;		/* who did it */
-	__u32 device;		/* device number */
-	__u32 cpu;		/* on what cpu did it happen */
-	__u16 error;		/* completion error */
-	__u16 pdu_len;		/* length of data after this trace */
-};
-
-/*
- * The remap event
- */
-struct blk_io_trace_remap {
-	__be32 device_from;
-	__be32 device_to;
-	__be64 sector_from;
-};
-
-enum {
-	Blktrace_setup = 1,
-	Blktrace_running,
-	Blktrace_stopped,
-};
-
-#define BLKTRACE_BDEV_SIZE	32
-
-/*
- * User setup structure passed with BLKTRACESTART
- */
-struct blk_user_trace_setup {
-	char name[BLKTRACE_BDEV_SIZE];	/* output */
-	__u16 act_mask;			/* input */
-	__u32 buf_size;			/* input */
-	__u32 buf_nr;			/* input */
-	__u64 start_lba;
-	__u64 end_lba;
-	__u32 pid;
-};
-
-#ifdef __KERNEL__
-#if defined(CONFIG_BLK_DEV_IO_TRACE)
-
-#include <linux/sysfs.h>
-
-struct blk_trace {
-	int trace_state;
-	struct rchan *rchan;
-	unsigned long __percpu *sequence;
-	unsigned char __percpu *msg_data;
-	u16 act_mask;
-	u64 start_lba;
-	u64 end_lba;
-	u32 pid;
-	u32 dev;
-	struct dentry *dir;
-	struct dentry *dropped_file;
-	struct dentry *msg_file;
-	atomic_t dropped;
-};
-
-extern int blk_trace_ioctl(struct block_device *, unsigned, char __user *);
-extern void blk_trace_shutdown(struct request_queue *);
-extern int do_blk_trace_setup(struct request_queue *q, char *name,
-			      dev_t dev, struct block_device *bdev,
-			      struct blk_user_trace_setup *buts);
-extern __printf(2, 3)
-void __trace_note_message(struct blk_trace *, const char *fmt, ...);
-
-/**
- * blk_add_trace_msg - Add a (simple) message to the blktrace stream
- * @q:		queue the io is for
- * @fmt:	format to print message in
- * args...	Variable argument list for format
- *
- * Description:
- *     Records a (simple) message onto the blktrace stream.
- *
- *     NOTE: BLK_TN_MAX_MSG characters are output at most.
- *     NOTE: Can not use 'static inline' due to presence of var args...
- *
- **/
-#define blk_add_trace_msg(q, fmt, ...)					\
-	do {								\
-		struct blk_trace *bt = (q)->blk_trace;			\
-		if (unlikely(bt))					\
-			__trace_note_message(bt, fmt, ##__VA_ARGS__);	\
-	} while (0)
-#define BLK_TN_MAX_MSG		128
-
-extern void blk_add_driver_data(struct request_queue *q, struct request *rq,
-				void *data, size_t len);
-extern int blk_trace_setup(struct request_queue *q, char *name, dev_t dev,
-			   struct block_device *bdev,
-			   char __user *arg);
-extern int blk_trace_startstop(struct request_queue *q, int start);
-extern int blk_trace_remove(struct request_queue *q);
-extern void blk_trace_remove_sysfs(struct device *dev);
-extern int blk_trace_init_sysfs(struct device *dev);
-
-extern struct attribute_group blk_trace_attr_group;
-
-#else /* !CONFIG_BLK_DEV_IO_TRACE */
-# define blk_trace_ioctl(bdev, cmd, arg)		(-ENOTTY)
-# define blk_trace_shutdown(q)				do { } while (0)
-# define do_blk_trace_setup(q, name, dev, bdev, buts)	(-ENOTTY)
-# define blk_add_driver_data(q, rq, data, len)		do {} while (0)
-# define blk_trace_setup(q, name, dev, bdev, arg)	(-ENOTTY)
-# define blk_trace_startstop(q, start)			(-ENOTTY)
-# define blk_trace_remove(q)				(-ENOTTY)
-# define blk_add_trace_msg(q, fmt, ...)			do { } while (0)
-# define blk_trace_remove_sysfs(dev)			do { } while (0)
-static inline int blk_trace_init_sysfs(struct device *dev)
-{
-	return 0;
-}
-
-#endif /* CONFIG_BLK_DEV_IO_TRACE */
-
-#ifdef CONFIG_COMPAT
-
-struct compat_blk_user_trace_setup {
-	char name[32];
-	u16 act_mask;
-	u32 buf_size;
-	u32 buf_nr;
-	compat_u64 start_lba;
-	compat_u64 end_lba;
-	u32 pid;
-};
-#define BLKTRACESETUP32 _IOWR(0x12, 115, struct compat_blk_user_trace_setup)
-
-#endif
-
-#if defined(CONFIG_EVENT_TRACING) && defined(CONFIG_BLOCK)
-
-static inline int blk_cmd_buf_len(struct request *rq)
-{
-	return (rq->cmd_type == REQ_TYPE_BLOCK_PC) ? rq->cmd_len * 3 : 1;
-}
-
-extern void blk_dump_cmd(char *buf, struct request *rq);
-extern void blk_fill_rwbs(char *rwbs, u32 rw, int bytes);
-
-#endif /* CONFIG_EVENT_TRACING && CONFIG_BLOCK */
-
-#endif /* __KERNEL__ */
-#endif
diff --git a/ANDROID_3.4.5/include/linux/blockgroup_lock.h b/ANDROID_3.4.5/include/linux/blockgroup_lock.h
deleted file mode 100644
index e44b88ba..00000000
--- a/ANDROID_3.4.5/include/linux/blockgroup_lock.h
+++ /dev/null
@@ -1,62 +0,0 @@
-#ifndef _LINUX_BLOCKGROUP_LOCK_H
-#define _LINUX_BLOCKGROUP_LOCK_H
-/*
- * Per-blockgroup locking for ext2 and ext3.
- *
- * Simple hashed spinlocking.
- */
-
-#include <linux/spinlock.h>
-#include <linux/cache.h>
-
-#ifdef CONFIG_SMP
-
-/*
- * We want a power-of-two.  Is there a better way than this?
- */
-
-#if NR_CPUS >= 32
-#define NR_BG_LOCKS	128
-#elif NR_CPUS >= 16
-#define NR_BG_LOCKS	64
-#elif NR_CPUS >= 8
-#define NR_BG_LOCKS	32
-#elif NR_CPUS >= 4
-#define NR_BG_LOCKS	16
-#elif NR_CPUS >= 2
-#define NR_BG_LOCKS	8
-#else
-#define NR_BG_LOCKS	4
-#endif
-
-#else	/* CONFIG_SMP */
-#define NR_BG_LOCKS	1
-#endif	/* CONFIG_SMP */
-
-struct bgl_lock {
-	spinlock_t lock;
-} ____cacheline_aligned_in_smp;
-
-struct blockgroup_lock {
-	struct bgl_lock locks[NR_BG_LOCKS];
-};
-
-static inline void bgl_lock_init(struct blockgroup_lock *bgl)
-{
-	int i;
-
-	for (i = 0; i < NR_BG_LOCKS; i++)
-		spin_lock_init(&bgl->locks[i].lock);
-}
-
-/*
- * The accessor is a macro so we can embed a blockgroup_lock into different
- * superblock types
- */
-static inline spinlock_t *
-bgl_lock_ptr(struct blockgroup_lock *bgl, unsigned int block_group)
-{
-	return &bgl->locks[(block_group) & (NR_BG_LOCKS-1)].lock;
-}
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/bma150.h b/ANDROID_3.4.5/include/linux/bma150.h
deleted file mode 100644
index 7911fda2..00000000
--- a/ANDROID_3.4.5/include/linux/bma150.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- * Copyright (c) 2011 Bosch Sensortec GmbH
- * Copyright (c) 2011 Unixphere
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef _BMA150_H_
-#define _BMA150_H_
-
-#define BMA150_DRIVER		"bma150"
-
-struct bma150_cfg {
-	bool any_motion_int;		/* Set to enable any-motion interrupt */
-	bool hg_int;			/* Set to enable high-G interrupt */
-	bool lg_int;			/* Set to enable low-G interrupt */
-	unsigned char any_motion_dur;	/* Any-motion duration */
-	unsigned char any_motion_thres;	/* Any-motion threshold */
-	unsigned char hg_hyst;		/* High-G hysterisis */
-	unsigned char hg_dur;		/* High-G duration */
-	unsigned char hg_thres;		/* High-G threshold */
-	unsigned char lg_hyst;		/* Low-G hysterisis */
-	unsigned char lg_dur;		/* Low-G duration */
-	unsigned char lg_thres;		/* Low-G threshold */
-	unsigned char range;		/* BMA0150_RANGE_xxx (in G) */
-	unsigned char bandwidth;	/* BMA0150_BW_xxx (in Hz) */
-};
-
-struct bma150_platform_data {
-	struct bma150_cfg cfg;
-	int (*irq_gpio_cfg)(void);
-};
-
-#endif /* _BMA150_H_ */
diff --git a/ANDROID_3.4.5/include/linux/bootmem.h b/ANDROID_3.4.5/include/linux/bootmem.h
deleted file mode 100644
index 66d3e954..00000000
--- a/ANDROID_3.4.5/include/linux/bootmem.h
+++ /dev/null
@@ -1,174 +0,0 @@
-/*
- * Discontiguous memory support, Kanoj Sarcar, SGI, Nov 1999
- */
-#ifndef _LINUX_BOOTMEM_H
-#define _LINUX_BOOTMEM_H
-
-#include <linux/mmzone.h>
-#include <asm/dma.h>
-
-/*
- *  simple boot-time physical memory area allocator.
- */
-
-extern unsigned long max_low_pfn;
-extern unsigned long min_low_pfn;
-
-/*
- * highest page
- */
-extern unsigned long max_pfn;
-
-#ifndef CONFIG_NO_BOOTMEM
-/*
- * node_bootmem_map is a map pointer - the bits represent all physical 
- * memory pages (including holes) on the node.
- */
-typedef struct bootmem_data {
-	unsigned long node_min_pfn;
-	unsigned long node_low_pfn;
-	void *node_bootmem_map;
-	unsigned long last_end_off;
-	unsigned long hint_idx;
-	struct list_head list;
-} bootmem_data_t;
-
-extern bootmem_data_t bootmem_node_data[];
-#endif
-
-extern unsigned long bootmem_bootmap_pages(unsigned long);
-
-extern unsigned long init_bootmem_node(pg_data_t *pgdat,
-				       unsigned long freepfn,
-				       unsigned long startpfn,
-				       unsigned long endpfn);
-extern unsigned long init_bootmem(unsigned long addr, unsigned long memend);
-
-extern unsigned long free_low_memory_core_early(int nodeid);
-extern unsigned long free_all_bootmem_node(pg_data_t *pgdat);
-extern unsigned long free_all_bootmem(void);
-
-extern void free_bootmem_node(pg_data_t *pgdat,
-			      unsigned long addr,
-			      unsigned long size);
-extern void free_bootmem(unsigned long addr, unsigned long size);
-extern void free_bootmem_late(unsigned long addr, unsigned long size);
-
-/*
- * Flags for reserve_bootmem (also if CONFIG_HAVE_ARCH_BOOTMEM_NODE,
- * the architecture-specific code should honor this).
- *
- * If flags is 0, then the return value is always 0 (success). If
- * flags contains BOOTMEM_EXCLUSIVE, then -EBUSY is returned if the
- * memory already was reserved.
- */
-#define BOOTMEM_DEFAULT		0
-#define BOOTMEM_EXCLUSIVE	(1<<0)
-
-extern int reserve_bootmem(unsigned long addr,
-			   unsigned long size,
-			   int flags);
-extern int reserve_bootmem_node(pg_data_t *pgdat,
-				unsigned long physaddr,
-				unsigned long size,
-				int flags);
-
-extern void *__alloc_bootmem(unsigned long size,
-			     unsigned long align,
-			     unsigned long goal);
-extern void *__alloc_bootmem_nopanic(unsigned long size,
-				     unsigned long align,
-				     unsigned long goal);
-extern void *__alloc_bootmem_node(pg_data_t *pgdat,
-				  unsigned long size,
-				  unsigned long align,
-				  unsigned long goal);
-void *__alloc_bootmem_node_high(pg_data_t *pgdat,
-				  unsigned long size,
-				  unsigned long align,
-				  unsigned long goal);
-extern void *__alloc_bootmem_node_nopanic(pg_data_t *pgdat,
-				  unsigned long size,
-				  unsigned long align,
-				  unsigned long goal);
-extern void *__alloc_bootmem_low(unsigned long size,
-				 unsigned long align,
-				 unsigned long goal);
-extern void *__alloc_bootmem_low_node(pg_data_t *pgdat,
-				      unsigned long size,
-				      unsigned long align,
-				      unsigned long goal);
-
-#ifdef CONFIG_NO_BOOTMEM
-/* We are using top down, so it is safe to use 0 here */
-#define BOOTMEM_LOW_LIMIT 0
-#else
-#define BOOTMEM_LOW_LIMIT __pa(MAX_DMA_ADDRESS)
-#endif
-
-#define alloc_bootmem(x) \
-	__alloc_bootmem(x, SMP_CACHE_BYTES, BOOTMEM_LOW_LIMIT)
-#define alloc_bootmem_align(x, align) \
-	__alloc_bootmem(x, align, BOOTMEM_LOW_LIMIT)
-#define alloc_bootmem_nopanic(x) \
-	__alloc_bootmem_nopanic(x, SMP_CACHE_BYTES, BOOTMEM_LOW_LIMIT)
-#define alloc_bootmem_pages(x) \
-	__alloc_bootmem(x, PAGE_SIZE, BOOTMEM_LOW_LIMIT)
-#define alloc_bootmem_pages_nopanic(x) \
-	__alloc_bootmem_nopanic(x, PAGE_SIZE, BOOTMEM_LOW_LIMIT)
-#define alloc_bootmem_node(pgdat, x) \
-	__alloc_bootmem_node(pgdat, x, SMP_CACHE_BYTES, BOOTMEM_LOW_LIMIT)
-#define alloc_bootmem_node_nopanic(pgdat, x) \
-	__alloc_bootmem_node_nopanic(pgdat, x, SMP_CACHE_BYTES, BOOTMEM_LOW_LIMIT)
-#define alloc_bootmem_pages_node(pgdat, x) \
-	__alloc_bootmem_node(pgdat, x, PAGE_SIZE, BOOTMEM_LOW_LIMIT)
-#define alloc_bootmem_pages_node_nopanic(pgdat, x) \
-	__alloc_bootmem_node_nopanic(pgdat, x, PAGE_SIZE, BOOTMEM_LOW_LIMIT)
-
-#define alloc_bootmem_low(x) \
-	__alloc_bootmem_low(x, SMP_CACHE_BYTES, 0)
-#define alloc_bootmem_low_pages(x) \
-	__alloc_bootmem_low(x, PAGE_SIZE, 0)
-#define alloc_bootmem_low_pages_node(pgdat, x) \
-	__alloc_bootmem_low_node(pgdat, x, PAGE_SIZE, 0)
-
-extern int reserve_bootmem_generic(unsigned long addr, unsigned long size,
-				   int flags);
-
-extern void *alloc_bootmem_section(unsigned long size,
-				   unsigned long section_nr);
-
-#ifdef CONFIG_HAVE_ARCH_ALLOC_REMAP
-extern void *alloc_remap(int nid, unsigned long size);
-#else
-static inline void *alloc_remap(int nid, unsigned long size)
-{
-	return NULL;
-}
-#endif /* CONFIG_HAVE_ARCH_ALLOC_REMAP */
-
-extern void *alloc_large_system_hash(const char *tablename,
-				     unsigned long bucketsize,
-				     unsigned long numentries,
-				     int scale,
-				     int flags,
-				     unsigned int *_hash_shift,
-				     unsigned int *_hash_mask,
-				     unsigned long limit);
-
-#define HASH_EARLY	0x00000001	/* Allocating during early boot? */
-#define HASH_SMALL	0x00000002	/* sub-page allocation allowed, min
-					 * shift passed via *_hash_shift */
-
-/* Only NUMA needs hash distribution. 64bit NUMA architectures have
- * sufficient vmalloc space.
- */
-#if defined(CONFIG_NUMA) && defined(CONFIG_64BIT)
-#define HASHDIST_DEFAULT 1
-#else
-#define HASHDIST_DEFAULT 0
-#endif
-extern int hashdist;		/* Distribute hashes across NUMA nodes? */
-
-
-#endif /* _LINUX_BOOTMEM_H */
diff --git a/ANDROID_3.4.5/include/linux/bottom_half.h b/ANDROID_3.4.5/include/linux/bottom_half.h
deleted file mode 100644
index 27b1bcff..00000000
--- a/ANDROID_3.4.5/include/linux/bottom_half.h
+++ /dev/null
@@ -1,9 +0,0 @@
-#ifndef _LINUX_BH_H
-#define _LINUX_BH_H
-
-extern void local_bh_disable(void);
-extern void _local_bh_enable(void);
-extern void local_bh_enable(void);
-extern void local_bh_enable_ip(unsigned long ip);
-
-#endif /* _LINUX_BH_H */
diff --git a/ANDROID_3.4.5/include/linux/bpqether.h b/ANDROID_3.4.5/include/linux/bpqether.h
deleted file mode 100644
index a6c35e1a..00000000
--- a/ANDROID_3.4.5/include/linux/bpqether.h
+++ /dev/null
@@ -1,41 +0,0 @@
-#ifndef	__BPQETHER_H
-#define	__BPQETHER_H
-
-/*
- * 	Defines for the BPQETHER pseudo device driver
- */
-
-#ifndef __LINUX_IF_ETHER_H
-#include <linux/if_ether.h>
-#endif
-
-#define SIOCSBPQETHOPT		(SIOCDEVPRIVATE+0)	/* reserved */
-#define SIOCSBPQETHADDR		(SIOCDEVPRIVATE+1)
- 
-struct bpq_ethaddr {
-	unsigned char destination[ETH_ALEN];
-	unsigned char accept[ETH_ALEN];
-};
-
-/* 
- * For SIOCSBPQETHOPT - this is compatible with PI2/PacketTwin card drivers,
- * currently not implemented, though. If someone wants to hook a radio
- * to his Ethernet card he may find this useful. ;-)
- */
-
-#define SIOCGBPQETHPARAM	0x5000  /* get Level 1 parameters */
-#define SIOCSBPQETHPARAM	0x5001  /* set */
-
-struct bpq_req  {
-    int cmd;
-    int speed;			/* unused */
-    int clockmode;		/* unused */
-    int txdelay;
-    unsigned char persist;	/* unused */
-    int slotime;		/* unused */
-    int squeldelay;
-    int dmachan;		/* unused */
-    int irq;			/* unused */
-};
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/brcmphy.h b/ANDROID_3.4.5/include/linux/brcmphy.h
deleted file mode 100644
index b840a496..00000000
--- a/ANDROID_3.4.5/include/linux/brcmphy.h
+++ /dev/null
@@ -1,31 +0,0 @@
-#define PHY_ID_BCM50610			0x0143bd60
-#define PHY_ID_BCM50610M		0x0143bd70
-#define PHY_ID_BCM5241			0x0143bc30
-#define PHY_ID_BCMAC131			0x0143bc70
-#define PHY_ID_BCM5481			0x0143bca0
-#define PHY_ID_BCM5482			0x0143bcb0
-#define PHY_ID_BCM5411			0x00206070
-#define PHY_ID_BCM5421			0x002060e0
-#define PHY_ID_BCM5464			0x002060b0
-#define PHY_ID_BCM5461			0x002060c0
-#define PHY_ID_BCM57780			0x03625d90
-
-#define PHY_BCM_OUI_MASK		0xfffffc00
-#define PHY_BCM_OUI_1			0x00206000
-#define PHY_BCM_OUI_2			0x0143bc00
-#define PHY_BCM_OUI_3			0x03625c00
-
-
-#define PHY_BCM_FLAGS_MODE_COPPER	0x00000001
-#define PHY_BCM_FLAGS_MODE_1000BX	0x00000002
-#define PHY_BCM_FLAGS_INTF_SGMII	0x00000010
-#define PHY_BCM_FLAGS_INTF_XAUI		0x00000020
-#define PHY_BRCM_WIRESPEED_ENABLE	0x00000100
-#define PHY_BRCM_AUTO_PWRDWN_ENABLE	0x00000200
-#define PHY_BRCM_RX_REFCLK_UNUSED	0x00000400
-#define PHY_BRCM_STD_IBND_DISABLE	0x00000800
-#define PHY_BRCM_EXT_IBND_RX_ENABLE	0x00001000
-#define PHY_BRCM_EXT_IBND_TX_ENABLE	0x00002000
-#define PHY_BRCM_CLEAR_RGMII_MODE	0x00004000
-#define PHY_BRCM_DIS_TXCRXC_NOENRGY	0x00008000
-#define PHY_BCM_FLAGS_VALID		0x80000000
diff --git a/ANDROID_3.4.5/include/linux/bsearch.h b/ANDROID_3.4.5/include/linux/bsearch.h
deleted file mode 100644
index 90b1aa86..00000000
--- a/ANDROID_3.4.5/include/linux/bsearch.h
+++ /dev/null
@@ -1,9 +0,0 @@
-#ifndef _LINUX_BSEARCH_H
-#define _LINUX_BSEARCH_H
-
-#include <linux/types.h>
-
-void *bsearch(const void *key, const void *base, size_t num, size_t size,
-	      int (*cmp)(const void *key, const void *elt));
-
-#endif /* _LINUX_BSEARCH_H */
diff --git a/ANDROID_3.4.5/include/linux/bsg-lib.h b/ANDROID_3.4.5/include/linux/bsg-lib.h
deleted file mode 100644
index f55ab8cd..00000000
--- a/ANDROID_3.4.5/include/linux/bsg-lib.h
+++ /dev/null
@@ -1,73 +0,0 @@
-/*
- *  BSG helper library
- *
- *  Copyright (C) 2008   James Smart, Emulex Corporation
- *  Copyright (C) 2011   Red Hat, Inc.  All rights reserved.
- *  Copyright (C) 2011   Mike Christie
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- */
-#ifndef _BLK_BSG_
-#define _BLK_BSG_
-
-#include <linux/blkdev.h>
-
-struct request;
-struct device;
-struct scatterlist;
-struct request_queue;
-
-struct bsg_buffer {
-	unsigned int payload_len;
-	int sg_cnt;
-	struct scatterlist *sg_list;
-};
-
-struct bsg_job {
-	struct device *dev;
-	struct request *req;
-
-	/* Transport/driver specific request/reply structs */
-	void *request;
-	void *reply;
-
-	unsigned int request_len;
-	unsigned int reply_len;
-	/*
-	 * On entry : reply_len indicates the buffer size allocated for
-	 * the reply.
-	 *
-	 * Upon completion : the message handler must set reply_len
-	 *  to indicates the size of the reply to be returned to the
-	 *  caller.
-	 */
-
-	/* DMA payloads for the request/response */
-	struct bsg_buffer request_payload;
-	struct bsg_buffer reply_payload;
-
-	void *dd_data;		/* Used for driver-specific storage */
-};
-
-void bsg_job_done(struct bsg_job *job, int result,
-		  unsigned int reply_payload_rcv_len);
-int bsg_setup_queue(struct device *dev, struct request_queue *q, char *name,
-		    bsg_job_fn *job_fn, int dd_job_size);
-void bsg_request_fn(struct request_queue *q);
-void bsg_remove_queue(struct request_queue *q);
-void bsg_goose_queue(struct request_queue *q);
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/bsg.h b/ANDROID_3.4.5/include/linux/bsg.h
deleted file mode 100644
index ecb4730d..00000000
--- a/ANDROID_3.4.5/include/linux/bsg.h
+++ /dev/null
@@ -1,94 +0,0 @@
-#ifndef BSG_H
-#define BSG_H
-
-#include <linux/types.h>
-
-#define BSG_PROTOCOL_SCSI		0
-
-#define BSG_SUB_PROTOCOL_SCSI_CMD	0
-#define BSG_SUB_PROTOCOL_SCSI_TMF	1
-#define BSG_SUB_PROTOCOL_SCSI_TRANSPORT	2
-
-/*
- * For flags member below
- * sg.h sg_io_hdr also has bits defined for it's flags member. However
- * none of these bits are implemented/used by bsg. The bits below are
- * allocated to not conflict with sg.h ones anyway.
- */
-#define BSG_FLAG_Q_AT_TAIL 0x10 /* default, == 0 at this bit, is Q_AT_HEAD */
-
-struct sg_io_v4 {
-	__s32 guard;		/* [i] 'Q' to differentiate from v3 */
-	__u32 protocol;		/* [i] 0 -> SCSI , .... */
-	__u32 subprotocol;	/* [i] 0 -> SCSI command, 1 -> SCSI task
-				   management function, .... */
-
-	__u32 request_len;	/* [i] in bytes */
-	__u64 request;		/* [i], [*i] {SCSI: cdb} */
-	__u64 request_tag;	/* [i] {SCSI: task tag (only if flagged)} */
-	__u32 request_attr;	/* [i] {SCSI: task attribute} */
-	__u32 request_priority;	/* [i] {SCSI: task priority} */
-	__u32 request_extra;	/* [i] {spare, for padding} */
-	__u32 max_response_len;	/* [i] in bytes */
-	__u64 response;		/* [i], [*o] {SCSI: (auto)sense data} */
-
-        /* "dout_": data out (to device); "din_": data in (from device) */
-	__u32 dout_iovec_count;	/* [i] 0 -> "flat" dout transfer else
-				   dout_xfer points to array of iovec */
-	__u32 dout_xfer_len;	/* [i] bytes to be transferred to device */
-	__u32 din_iovec_count;	/* [i] 0 -> "flat" din transfer */
-	__u32 din_xfer_len;	/* [i] bytes to be transferred from device */
-	__u64 dout_xferp;	/* [i], [*i] */
-	__u64 din_xferp;	/* [i], [*o] */
-
-	__u32 timeout;		/* [i] units: millisecond */
-	__u32 flags;		/* [i] bit mask */
-	__u64 usr_ptr;		/* [i->o] unused internally */
-	__u32 spare_in;		/* [i] */
-
-	__u32 driver_status;	/* [o] 0 -> ok */
-	__u32 transport_status;	/* [o] 0 -> ok */
-	__u32 device_status;	/* [o] {SCSI: command completion status} */
-	__u32 retry_delay;	/* [o] {SCSI: status auxiliary information} */
-	__u32 info;		/* [o] additional information */
-	__u32 duration;		/* [o] time to complete, in milliseconds */
-	__u32 response_len;	/* [o] bytes of response actually written */
-	__s32 din_resid;	/* [o] din_xfer_len - actual_din_xfer_len */
-	__s32 dout_resid;	/* [o] dout_xfer_len - actual_dout_xfer_len */
-	__u64 generated_tag;	/* [o] {SCSI: transport generated task tag} */
-	__u32 spare_out;	/* [o] */
-
-	__u32 padding;
-};
-
-#ifdef __KERNEL__
-
-#if defined(CONFIG_BLK_DEV_BSG)
-struct bsg_class_device {
-	struct device *class_dev;
-	struct device *parent;
-	int minor;
-	struct request_queue *queue;
-	struct kref ref;
-	void (*release)(struct device *);
-};
-
-extern int bsg_register_queue(struct request_queue *q,
-			      struct device *parent, const char *name,
-			      void (*release)(struct device *));
-extern void bsg_unregister_queue(struct request_queue *);
-#else
-static inline int bsg_register_queue(struct request_queue *q,
-				     struct device *parent, const char *name,
-				     void (*release)(struct device *))
-{
-	return 0;
-}
-static inline void bsg_unregister_queue(struct request_queue *q)
-{
-}
-#endif
-
-#endif /* __KERNEL__ */
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/btree-128.h b/ANDROID_3.4.5/include/linux/btree-128.h
deleted file mode 100644
index 0b3414c4..00000000
--- a/ANDROID_3.4.5/include/linux/btree-128.h
+++ /dev/null
@@ -1,109 +0,0 @@
-extern struct btree_geo btree_geo128;
-
-struct btree_head128 { struct btree_head h; };
-
-static inline void btree_init_mempool128(struct btree_head128 *head,
-					 mempool_t *mempool)
-{
-	btree_init_mempool(&head->h, mempool);
-}
-
-static inline int btree_init128(struct btree_head128 *head)
-{
-	return btree_init(&head->h);
-}
-
-static inline void btree_destroy128(struct btree_head128 *head)
-{
-	btree_destroy(&head->h);
-}
-
-static inline void *btree_lookup128(struct btree_head128 *head, u64 k1, u64 k2)
-{
-	u64 key[2] = {k1, k2};
-	return btree_lookup(&head->h, &btree_geo128, (unsigned long *)&key);
-}
-
-static inline void *btree_get_prev128(struct btree_head128 *head,
-				      u64 *k1, u64 *k2)
-{
-	u64 key[2] = {*k1, *k2};
-	void *val;
-
-	val = btree_get_prev(&head->h, &btree_geo128,
-			     (unsigned long *)&key);
-	*k1 = key[0];
-	*k2 = key[1];
-	return val;
-}
-
-static inline int btree_insert128(struct btree_head128 *head, u64 k1, u64 k2,
-				  void *val, gfp_t gfp)
-{
-	u64 key[2] = {k1, k2};
-	return btree_insert(&head->h, &btree_geo128,
-			    (unsigned long *)&key, val, gfp);
-}
-
-static inline int btree_update128(struct btree_head128 *head, u64 k1, u64 k2,
-				  void *val)
-{
-	u64 key[2] = {k1, k2};
-	return btree_update(&head->h, &btree_geo128,
-			    (unsigned long *)&key, val);
-}
-
-static inline void *btree_remove128(struct btree_head128 *head, u64 k1, u64 k2)
-{
-	u64 key[2] = {k1, k2};
-	return btree_remove(&head->h, &btree_geo128, (unsigned long *)&key);
-}
-
-static inline void *btree_last128(struct btree_head128 *head, u64 *k1, u64 *k2)
-{
-	u64 key[2];
-	void *val;
-
-	val = btree_last(&head->h, &btree_geo128, (unsigned long *)&key[0]);
-	if (val) {
-		*k1 = key[0];
-		*k2 = key[1];
-	}
-
-	return val;
-}
-
-static inline int btree_merge128(struct btree_head128 *target,
-				 struct btree_head128 *victim,
-				 gfp_t gfp)
-{
-	return btree_merge(&target->h, &victim->h, &btree_geo128, gfp);
-}
-
-void visitor128(void *elem, unsigned long opaque, unsigned long *__key,
-		size_t index, void *__func);
-
-typedef void (*visitor128_t)(void *elem, unsigned long opaque,
-			     u64 key1, u64 key2, size_t index);
-
-static inline size_t btree_visitor128(struct btree_head128 *head,
-				      unsigned long opaque,
-				      visitor128_t func2)
-{
-	return btree_visitor(&head->h, &btree_geo128, opaque,
-			     visitor128, func2);
-}
-
-static inline size_t btree_grim_visitor128(struct btree_head128 *head,
-					   unsigned long opaque,
-					   visitor128_t func2)
-{
-	return btree_grim_visitor(&head->h, &btree_geo128, opaque,
-				  visitor128, func2);
-}
-
-#define btree_for_each_safe128(head, k1, k2, val)	\
-	for (val = btree_last128(head, &k1, &k2);	\
-	     val;					\
-	     val = btree_get_prev128(head, &k1, &k2))
-
diff --git a/ANDROID_3.4.5/include/linux/btree-type.h b/ANDROID_3.4.5/include/linux/btree-type.h
deleted file mode 100644
index 9a1147ef..00000000
--- a/ANDROID_3.4.5/include/linux/btree-type.h
+++ /dev/null
@@ -1,147 +0,0 @@
-#define __BTREE_TP(pfx, type, sfx)	pfx ## type ## sfx
-#define _BTREE_TP(pfx, type, sfx)	__BTREE_TP(pfx, type, sfx)
-#define BTREE_TP(pfx)			_BTREE_TP(pfx, BTREE_TYPE_SUFFIX,)
-#define BTREE_FN(name)			BTREE_TP(btree_ ## name)
-#define BTREE_TYPE_HEAD			BTREE_TP(struct btree_head)
-#define VISITOR_FN			BTREE_TP(visitor)
-#define VISITOR_FN_T			_BTREE_TP(visitor, BTREE_TYPE_SUFFIX, _t)
-
-BTREE_TYPE_HEAD {
-	struct btree_head h;
-};
-
-static inline void BTREE_FN(init_mempool)(BTREE_TYPE_HEAD *head,
-					  mempool_t *mempool)
-{
-	btree_init_mempool(&head->h, mempool);
-}
-
-static inline int BTREE_FN(init)(BTREE_TYPE_HEAD *head)
-{
-	return btree_init(&head->h);
-}
-
-static inline void BTREE_FN(destroy)(BTREE_TYPE_HEAD *head)
-{
-	btree_destroy(&head->h);
-}
-
-static inline int BTREE_FN(merge)(BTREE_TYPE_HEAD *target,
-				  BTREE_TYPE_HEAD *victim,
-				  gfp_t gfp)
-{
-	return btree_merge(&target->h, &victim->h, BTREE_TYPE_GEO, gfp);
-}
-
-#if (BITS_PER_LONG > BTREE_TYPE_BITS)
-static inline void *BTREE_FN(lookup)(BTREE_TYPE_HEAD *head, BTREE_KEYTYPE key)
-{
-	unsigned long _key = key;
-	return btree_lookup(&head->h, BTREE_TYPE_GEO, &_key);
-}
-
-static inline int BTREE_FN(insert)(BTREE_TYPE_HEAD *head, BTREE_KEYTYPE key,
-				   void *val, gfp_t gfp)
-{
-	unsigned long _key = key;
-	return btree_insert(&head->h, BTREE_TYPE_GEO, &_key, val, gfp);
-}
-
-static inline int BTREE_FN(update)(BTREE_TYPE_HEAD *head, BTREE_KEYTYPE key,
-		void *val)
-{
-	unsigned long _key = key;
-	return btree_update(&head->h, BTREE_TYPE_GEO, &_key, val);
-}
-
-static inline void *BTREE_FN(remove)(BTREE_TYPE_HEAD *head, BTREE_KEYTYPE key)
-{
-	unsigned long _key = key;
-	return btree_remove(&head->h, BTREE_TYPE_GEO, &_key);
-}
-
-static inline void *BTREE_FN(last)(BTREE_TYPE_HEAD *head, BTREE_KEYTYPE *key)
-{
-	unsigned long _key;
-	void *val = btree_last(&head->h, BTREE_TYPE_GEO, &_key);
-	if (val)
-		*key = _key;
-	return val;
-}
-
-static inline void *BTREE_FN(get_prev)(BTREE_TYPE_HEAD *head, BTREE_KEYTYPE *key)
-{
-	unsigned long _key = *key;
-	void *val = btree_get_prev(&head->h, BTREE_TYPE_GEO, &_key);
-	if (val)
-		*key = _key;
-	return val;
-}
-#else
-static inline void *BTREE_FN(lookup)(BTREE_TYPE_HEAD *head, BTREE_KEYTYPE key)
-{
-	return btree_lookup(&head->h, BTREE_TYPE_GEO, (unsigned long *)&key);
-}
-
-static inline int BTREE_FN(insert)(BTREE_TYPE_HEAD *head, BTREE_KEYTYPE key,
-			   void *val, gfp_t gfp)
-{
-	return btree_insert(&head->h, BTREE_TYPE_GEO, (unsigned long *)&key,
-			    val, gfp);
-}
-
-static inline int BTREE_FN(update)(BTREE_TYPE_HEAD *head, BTREE_KEYTYPE key,
-		void *val)
-{
-	return btree_update(&head->h, BTREE_TYPE_GEO, (unsigned long *)&key, val);
-}
-
-static inline void *BTREE_FN(remove)(BTREE_TYPE_HEAD *head, BTREE_KEYTYPE key)
-{
-	return btree_remove(&head->h, BTREE_TYPE_GEO, (unsigned long *)&key);
-}
-
-static inline void *BTREE_FN(last)(BTREE_TYPE_HEAD *head, BTREE_KEYTYPE *key)
-{
-	return btree_last(&head->h, BTREE_TYPE_GEO, (unsigned long *)key);
-}
-
-static inline void *BTREE_FN(get_prev)(BTREE_TYPE_HEAD *head, BTREE_KEYTYPE *key)
-{
-	return btree_get_prev(&head->h, BTREE_TYPE_GEO, (unsigned long *)key);
-}
-#endif
-
-void VISITOR_FN(void *elem, unsigned long opaque, unsigned long *key,
-		size_t index, void *__func);
-
-typedef void (*VISITOR_FN_T)(void *elem, unsigned long opaque,
-			     BTREE_KEYTYPE key, size_t index);
-
-static inline size_t BTREE_FN(visitor)(BTREE_TYPE_HEAD *head,
-				       unsigned long opaque,
-				       VISITOR_FN_T func2)
-{
-	return btree_visitor(&head->h, BTREE_TYPE_GEO, opaque,
-			     visitorl, func2);
-}
-
-static inline size_t BTREE_FN(grim_visitor)(BTREE_TYPE_HEAD *head,
-					    unsigned long opaque,
-					    VISITOR_FN_T func2)
-{
-	return btree_grim_visitor(&head->h, BTREE_TYPE_GEO, opaque,
-				  visitorl, func2);
-}
-
-#undef VISITOR_FN
-#undef VISITOR_FN_T
-#undef __BTREE_TP
-#undef _BTREE_TP
-#undef BTREE_TP
-#undef BTREE_FN
-#undef BTREE_TYPE_HEAD
-#undef BTREE_TYPE_SUFFIX
-#undef BTREE_TYPE_GEO
-#undef BTREE_KEYTYPE
-#undef BTREE_TYPE_BITS
diff --git a/ANDROID_3.4.5/include/linux/btree.h b/ANDROID_3.4.5/include/linux/btree.h
deleted file mode 100644
index 65b5bb05..00000000
--- a/ANDROID_3.4.5/include/linux/btree.h
+++ /dev/null
@@ -1,243 +0,0 @@
-#ifndef BTREE_H
-#define BTREE_H
-
-#include <linux/kernel.h>
-#include <linux/mempool.h>
-
-/**
- * DOC: B+Tree basics
- *
- * A B+Tree is a data structure for looking up arbitrary (currently allowing
- * unsigned long, u32, u64 and 2 * u64) keys into pointers. The data structure
- * is described at http://en.wikipedia.org/wiki/B-tree, we currently do not
- * use binary search to find the key on lookups.
- *
- * Each B+Tree consists of a head, that contains bookkeeping information and
- * a variable number (starting with zero) nodes. Each node contains the keys
- * and pointers to sub-nodes, or, for leaf nodes, the keys and values for the
- * tree entries.
- *
- * Each node in this implementation has the following layout:
- * [key1, key2, ..., keyN] [val1, val2, ..., valN]
- *
- * Each key here is an array of unsigned longs, geo->no_longs in total. The
- * number of keys and values (N) is geo->no_pairs.
- */
-
-/**
- * struct btree_head - btree head
- *
- * @node: the first node in the tree
- * @mempool: mempool used for node allocations
- * @height: current of the tree
- */
-struct btree_head {
-	unsigned long *node;
-	mempool_t *mempool;
-	int height;
-};
-
-/* btree geometry */
-struct btree_geo;
-
-/**
- * btree_alloc - allocate function for the mempool
- * @gfp_mask: gfp mask for the allocation
- * @pool_data: unused
- */
-void *btree_alloc(gfp_t gfp_mask, void *pool_data);
-
-/**
- * btree_free - free function for the mempool
- * @element: the element to free
- * @pool_data: unused
- */
-void btree_free(void *element, void *pool_data);
-
-/**
- * btree_init_mempool - initialise a btree with given mempool
- *
- * @head: the btree head to initialise
- * @mempool: the mempool to use
- *
- * When this function is used, there is no need to destroy
- * the mempool.
- */
-void btree_init_mempool(struct btree_head *head, mempool_t *mempool);
-
-/**
- * btree_init - initialise a btree
- *
- * @head: the btree head to initialise
- *
- * This function allocates the memory pool that the
- * btree needs. Returns zero or a negative error code
- * (-%ENOMEM) when memory allocation fails.
- *
- */
-int __must_check btree_init(struct btree_head *head);
-
-/**
- * btree_destroy - destroy mempool
- *
- * @head: the btree head to destroy
- *
- * This function destroys the internal memory pool, use only
- * when using btree_init(), not with btree_init_mempool().
- */
-void btree_destroy(struct btree_head *head);
-
-/**
- * btree_lookup - look up a key in the btree
- *
- * @head: the btree to look in
- * @geo: the btree geometry
- * @key: the key to look up
- *
- * This function returns the value for the given key, or %NULL.
- */
-void *btree_lookup(struct btree_head *head, struct btree_geo *geo,
-		   unsigned long *key);
-
-/**
- * btree_insert - insert an entry into the btree
- *
- * @head: the btree to add to
- * @geo: the btree geometry
- * @key: the key to add (must not already be present)
- * @val: the value to add (must not be %NULL)
- * @gfp: allocation flags for node allocations
- *
- * This function returns 0 if the item could be added, or an
- * error code if it failed (may fail due to memory pressure).
- */
-int __must_check btree_insert(struct btree_head *head, struct btree_geo *geo,
-			      unsigned long *key, void *val, gfp_t gfp);
-/**
- * btree_update - update an entry in the btree
- *
- * @head: the btree to update
- * @geo: the btree geometry
- * @key: the key to update
- * @val: the value to change it to (must not be %NULL)
- *
- * This function returns 0 if the update was successful, or
- * -%ENOENT if the key could not be found.
- */
-int btree_update(struct btree_head *head, struct btree_geo *geo,
-		 unsigned long *key, void *val);
-/**
- * btree_remove - remove an entry from the btree
- *
- * @head: the btree to update
- * @geo: the btree geometry
- * @key: the key to remove
- *
- * This function returns the removed entry, or %NULL if the key
- * could not be found.
- */
-void *btree_remove(struct btree_head *head, struct btree_geo *geo,
-		   unsigned long *key);
-
-/**
- * btree_merge - merge two btrees
- *
- * @target: the tree that gets all the entries
- * @victim: the tree that gets merged into @target
- * @geo: the btree geometry
- * @gfp: allocation flags
- *
- * The two trees @target and @victim may not contain the same keys,
- * that is a bug and triggers a BUG(). This function returns zero
- * if the trees were merged successfully, and may return a failure
- * when memory allocation fails, in which case both trees might have
- * been partially merged, i.e. some entries have been moved from
- * @victim to @target.
- */
-int btree_merge(struct btree_head *target, struct btree_head *victim,
-		struct btree_geo *geo, gfp_t gfp);
-
-/**
- * btree_last - get last entry in btree
- *
- * @head: btree head
- * @geo: btree geometry
- * @key: last key
- *
- * Returns the last entry in the btree, and sets @key to the key
- * of that entry; returns NULL if the tree is empty, in that case
- * key is not changed.
- */
-void *btree_last(struct btree_head *head, struct btree_geo *geo,
-		 unsigned long *key);
-
-/**
- * btree_get_prev - get previous entry
- *
- * @head: btree head
- * @geo: btree geometry
- * @key: pointer to key
- *
- * The function returns the next item right before the value pointed to by
- * @key, and updates @key with its key, or returns %NULL when there is no
- * entry with a key smaller than the given key.
- */
-void *btree_get_prev(struct btree_head *head, struct btree_geo *geo,
-		     unsigned long *key);
-
-
-/* internal use, use btree_visitor{l,32,64,128} */
-size_t btree_visitor(struct btree_head *head, struct btree_geo *geo,
-		     unsigned long opaque,
-		     void (*func)(void *elem, unsigned long opaque,
-				  unsigned long *key, size_t index,
-				  void *func2),
-		     void *func2);
-
-/* internal use, use btree_grim_visitor{l,32,64,128} */
-size_t btree_grim_visitor(struct btree_head *head, struct btree_geo *geo,
-			  unsigned long opaque,
-			  void (*func)(void *elem, unsigned long opaque,
-				       unsigned long *key,
-				       size_t index, void *func2),
-			  void *func2);
-
-
-#include <linux/btree-128.h>
-
-extern struct btree_geo btree_geo32;
-#define BTREE_TYPE_SUFFIX l
-#define BTREE_TYPE_BITS BITS_PER_LONG
-#define BTREE_TYPE_GEO &btree_geo32
-#define BTREE_KEYTYPE unsigned long
-#include <linux/btree-type.h>
-
-#define btree_for_each_safel(head, key, val)	\
-	for (val = btree_lastl(head, &key);	\
-	     val;				\
-	     val = btree_get_prevl(head, &key))
-
-#define BTREE_TYPE_SUFFIX 32
-#define BTREE_TYPE_BITS 32
-#define BTREE_TYPE_GEO &btree_geo32
-#define BTREE_KEYTYPE u32
-#include <linux/btree-type.h>
-
-#define btree_for_each_safe32(head, key, val)	\
-	for (val = btree_last32(head, &key);	\
-	     val;				\
-	     val = btree_get_prev32(head, &key))
-
-extern struct btree_geo btree_geo64;
-#define BTREE_TYPE_SUFFIX 64
-#define BTREE_TYPE_BITS 64
-#define BTREE_TYPE_GEO &btree_geo64
-#define BTREE_KEYTYPE u64
-#include <linux/btree-type.h>
-
-#define btree_for_each_safe64(head, key, val)	\
-	for (val = btree_last64(head, &key);	\
-	     val;				\
-	     val = btree_get_prev64(head, &key))
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/buffer_head.h b/ANDROID_3.4.5/include/linux/buffer_head.h
deleted file mode 100644
index 458f4977..00000000
--- a/ANDROID_3.4.5/include/linux/buffer_head.h
+++ /dev/null
@@ -1,350 +0,0 @@
-/*
- * include/linux/buffer_head.h
- *
- * Everything to do with buffer_heads.
- */
-
-#ifndef _LINUX_BUFFER_HEAD_H
-#define _LINUX_BUFFER_HEAD_H
-
-#include <linux/types.h>
-#include <linux/fs.h>
-#include <linux/linkage.h>
-#include <linux/pagemap.h>
-#include <linux/wait.h>
-#include <linux/atomic.h>
-
-#ifdef CONFIG_BLOCK
-
-enum bh_state_bits {
-	BH_Uptodate,	/* Contains valid data */
-	BH_Dirty,	/* Is dirty */
-	BH_Lock,	/* Is locked */
-	BH_Req,		/* Has been submitted for I/O */
-	BH_Uptodate_Lock,/* Used by the first bh in a page, to serialise
-			  * IO completion of other buffers in the page
-			  */
-
-	BH_Mapped,	/* Has a disk mapping */
-	BH_New,		/* Disk mapping was newly created by get_block */
-	BH_Async_Read,	/* Is under end_buffer_async_read I/O */
-	BH_Async_Write,	/* Is under end_buffer_async_write I/O */
-	BH_Delay,	/* Buffer is not yet allocated on disk */
-	BH_Boundary,	/* Block is followed by a discontiguity */
-	BH_Write_EIO,	/* I/O error on write */
-	BH_Unwritten,	/* Buffer is allocated on disk but not written */
-	BH_Quiet,	/* Buffer Error Prinks to be quiet */
-
-	BH_PrivateStart,/* not a state bit, but the first bit available
-			 * for private allocation by other entities
-			 */
-};
-
-#define MAX_BUF_PER_PAGE (PAGE_CACHE_SIZE / 512)
-
-struct page;
-struct buffer_head;
-struct address_space;
-typedef void (bh_end_io_t)(struct buffer_head *bh, int uptodate);
-
-/*
- * Historically, a buffer_head was used to map a single block
- * within a page, and of course as the unit of I/O through the
- * filesystem and block layers.  Nowadays the basic I/O unit
- * is the bio, and buffer_heads are used for extracting block
- * mappings (via a get_block_t call), for tracking state within
- * a page (via a page_mapping) and for wrapping bio submission
- * for backward compatibility reasons (e.g. submit_bh).
- */
-struct buffer_head {
-	unsigned long b_state;		/* buffer state bitmap (see above) */
-	struct buffer_head *b_this_page;/* circular list of page's buffers */
-	struct page *b_page;		/* the page this bh is mapped to */
-
-	sector_t b_blocknr;		/* start block number */
-	size_t b_size;			/* size of mapping */
-	char *b_data;			/* pointer to data within the page */
-
-	struct block_device *b_bdev;
-	bh_end_io_t *b_end_io;		/* I/O completion */
- 	void *b_private;		/* reserved for b_end_io */
-	struct list_head b_assoc_buffers; /* associated with another mapping */
-	struct address_space *b_assoc_map;	/* mapping this buffer is
-						   associated with */
-	atomic_t b_count;		/* users using this buffer_head */
-};
-
-/*
- * macro tricks to expand the set_buffer_foo(), clear_buffer_foo()
- * and buffer_foo() functions.
- */
-#define BUFFER_FNS(bit, name)						\
-static inline void set_buffer_##name(struct buffer_head *bh)		\
-{									\
-	set_bit(BH_##bit, &(bh)->b_state);				\
-}									\
-static inline void clear_buffer_##name(struct buffer_head *bh)		\
-{									\
-	clear_bit(BH_##bit, &(bh)->b_state);				\
-}									\
-static inline int buffer_##name(const struct buffer_head *bh)		\
-{									\
-	return test_bit(BH_##bit, &(bh)->b_state);			\
-}
-
-/*
- * test_set_buffer_foo() and test_clear_buffer_foo()
- */
-#define TAS_BUFFER_FNS(bit, name)					\
-static inline int test_set_buffer_##name(struct buffer_head *bh)	\
-{									\
-	return test_and_set_bit(BH_##bit, &(bh)->b_state);		\
-}									\
-static inline int test_clear_buffer_##name(struct buffer_head *bh)	\
-{									\
-	return test_and_clear_bit(BH_##bit, &(bh)->b_state);		\
-}									\
-
-/*
- * Emit the buffer bitops functions.   Note that there are also functions
- * of the form "mark_buffer_foo()".  These are higher-level functions which
- * do something in addition to setting a b_state bit.
- */
-BUFFER_FNS(Uptodate, uptodate)
-BUFFER_FNS(Dirty, dirty)
-TAS_BUFFER_FNS(Dirty, dirty)
-BUFFER_FNS(Lock, locked)
-BUFFER_FNS(Req, req)
-TAS_BUFFER_FNS(Req, req)
-BUFFER_FNS(Mapped, mapped)
-BUFFER_FNS(New, new)
-BUFFER_FNS(Async_Read, async_read)
-BUFFER_FNS(Async_Write, async_write)
-BUFFER_FNS(Delay, delay)
-BUFFER_FNS(Boundary, boundary)
-BUFFER_FNS(Write_EIO, write_io_error)
-BUFFER_FNS(Unwritten, unwritten)
-
-#define bh_offset(bh)		((unsigned long)(bh)->b_data & ~PAGE_MASK)
-#define touch_buffer(bh)	mark_page_accessed(bh->b_page)
-
-/* If we *know* page->private refers to buffer_heads */
-#define page_buffers(page)					\
-	({							\
-		BUG_ON(!PagePrivate(page));			\
-		((struct buffer_head *)page_private(page));	\
-	})
-#define page_has_buffers(page)	PagePrivate(page)
-
-/*
- * Declarations
- */
-
-void mark_buffer_dirty(struct buffer_head *bh);
-void init_buffer(struct buffer_head *, bh_end_io_t *, void *);
-void set_bh_page(struct buffer_head *bh,
-		struct page *page, unsigned long offset);
-int try_to_free_buffers(struct page *);
-struct buffer_head *alloc_page_buffers(struct page *page, unsigned long size,
-		int retry);
-void create_empty_buffers(struct page *, unsigned long,
-			unsigned long b_state);
-void end_buffer_read_sync(struct buffer_head *bh, int uptodate);
-void end_buffer_write_sync(struct buffer_head *bh, int uptodate);
-void end_buffer_async_write(struct buffer_head *bh, int uptodate);
-
-/* Things to do with buffers at mapping->private_list */
-void mark_buffer_dirty_inode(struct buffer_head *bh, struct inode *inode);
-int inode_has_buffers(struct inode *);
-void invalidate_inode_buffers(struct inode *);
-int remove_inode_buffers(struct inode *inode);
-int sync_mapping_buffers(struct address_space *mapping);
-void unmap_underlying_metadata(struct block_device *bdev, sector_t block);
-
-void mark_buffer_async_write(struct buffer_head *bh);
-void __wait_on_buffer(struct buffer_head *);
-wait_queue_head_t *bh_waitq_head(struct buffer_head *bh);
-struct buffer_head *__find_get_block(struct block_device *bdev, sector_t block,
-			unsigned size);
-struct buffer_head *__getblk(struct block_device *bdev, sector_t block,
-			unsigned size);
-void __brelse(struct buffer_head *);
-void __bforget(struct buffer_head *);
-void __breadahead(struct block_device *, sector_t block, unsigned int size);
-struct buffer_head *__bread(struct block_device *, sector_t block, unsigned size);
-void invalidate_bh_lrus(void);
-struct buffer_head *alloc_buffer_head(gfp_t gfp_flags);
-void free_buffer_head(struct buffer_head * bh);
-void unlock_buffer(struct buffer_head *bh);
-void __lock_buffer(struct buffer_head *bh);
-void ll_rw_block(int, int, struct buffer_head * bh[]);
-int sync_dirty_buffer(struct buffer_head *bh);
-int __sync_dirty_buffer(struct buffer_head *bh, int rw);
-void write_dirty_buffer(struct buffer_head *bh, int rw);
-int submit_bh(int, struct buffer_head *);
-void write_boundary_block(struct block_device *bdev,
-			sector_t bblock, unsigned blocksize);
-int bh_uptodate_or_lock(struct buffer_head *bh);
-int bh_submit_read(struct buffer_head *bh);
-
-extern int buffer_heads_over_limit;
-
-/*
- * Generic address_space_operations implementations for buffer_head-backed
- * address_spaces.
- */
-void block_invalidatepage(struct page *page, unsigned long offset);
-int block_write_full_page(struct page *page, get_block_t *get_block,
-				struct writeback_control *wbc);
-int block_write_full_page_endio(struct page *page, get_block_t *get_block,
-			struct writeback_control *wbc, bh_end_io_t *handler);
-int block_read_full_page(struct page*, get_block_t*);
-int block_is_partially_uptodate(struct page *page, read_descriptor_t *desc,
-				unsigned long from);
-int block_write_begin(struct address_space *mapping, loff_t pos, unsigned len,
-		unsigned flags, struct page **pagep, get_block_t *get_block);
-int __block_write_begin(struct page *page, loff_t pos, unsigned len,
-		get_block_t *get_block);
-int block_write_end(struct file *, struct address_space *,
-				loff_t, unsigned, unsigned,
-				struct page *, void *);
-int generic_write_end(struct file *, struct address_space *,
-				loff_t, unsigned, unsigned,
-				struct page *, void *);
-void page_zero_new_buffers(struct page *page, unsigned from, unsigned to);
-int cont_write_begin(struct file *, struct address_space *, loff_t,
-			unsigned, unsigned, struct page **, void **,
-			get_block_t *, loff_t *);
-int generic_cont_expand_simple(struct inode *inode, loff_t size);
-int block_commit_write(struct page *page, unsigned from, unsigned to);
-int __block_page_mkwrite(struct vm_area_struct *vma, struct vm_fault *vmf,
-				get_block_t get_block);
-int block_page_mkwrite(struct vm_area_struct *vma, struct vm_fault *vmf,
-				get_block_t get_block);
-/* Convert errno to return value from ->page_mkwrite() call */
-static inline int block_page_mkwrite_return(int err)
-{
-	if (err == 0)
-		return VM_FAULT_LOCKED;
-	if (err == -EFAULT)
-		return VM_FAULT_NOPAGE;
-	if (err == -ENOMEM)
-		return VM_FAULT_OOM;
-	if (err == -EAGAIN)
-		return VM_FAULT_RETRY;
-	/* -ENOSPC, -EDQUOT, -EIO ... */
-	return VM_FAULT_SIGBUS;
-}
-sector_t generic_block_bmap(struct address_space *, sector_t, get_block_t *);
-int block_truncate_page(struct address_space *, loff_t, get_block_t *);
-int nobh_write_begin(struct address_space *, loff_t, unsigned, unsigned,
-				struct page **, void **, get_block_t*);
-int nobh_write_end(struct file *, struct address_space *,
-				loff_t, unsigned, unsigned,
-				struct page *, void *);
-int nobh_truncate_page(struct address_space *, loff_t, get_block_t *);
-int nobh_writepage(struct page *page, get_block_t *get_block,
-                        struct writeback_control *wbc);
-
-void buffer_init(void);
-
-/*
- * inline definitions
- */
-
-static inline void attach_page_buffers(struct page *page,
-		struct buffer_head *head)
-{
-	page_cache_get(page);
-	SetPagePrivate(page);
-	set_page_private(page, (unsigned long)head);
-}
-
-static inline void get_bh(struct buffer_head *bh)
-{
-        atomic_inc(&bh->b_count);
-}
-
-static inline void put_bh(struct buffer_head *bh)
-{
-        smp_mb__before_atomic_dec();
-        atomic_dec(&bh->b_count);
-}
-
-static inline void brelse(struct buffer_head *bh)
-{
-	if (bh)
-		__brelse(bh);
-}
-
-static inline void bforget(struct buffer_head *bh)
-{
-	if (bh)
-		__bforget(bh);
-}
-
-static inline struct buffer_head *
-sb_bread(struct super_block *sb, sector_t block)
-{
-	return __bread(sb->s_bdev, block, sb->s_blocksize);
-}
-
-static inline void
-sb_breadahead(struct super_block *sb, sector_t block)
-{
-	__breadahead(sb->s_bdev, block, sb->s_blocksize);
-}
-
-static inline struct buffer_head *
-sb_getblk(struct super_block *sb, sector_t block)
-{
-	return __getblk(sb->s_bdev, block, sb->s_blocksize);
-}
-
-static inline struct buffer_head *
-sb_find_get_block(struct super_block *sb, sector_t block)
-{
-	return __find_get_block(sb->s_bdev, block, sb->s_blocksize);
-}
-
-static inline void
-map_bh(struct buffer_head *bh, struct super_block *sb, sector_t block)
-{
-	set_buffer_mapped(bh);
-	bh->b_bdev = sb->s_bdev;
-	bh->b_blocknr = block;
-	bh->b_size = sb->s_blocksize;
-}
-
-static inline void wait_on_buffer(struct buffer_head *bh)
-{
-	might_sleep();
-	if (buffer_locked(bh))
-		__wait_on_buffer(bh);
-}
-
-static inline int trylock_buffer(struct buffer_head *bh)
-{
-	return likely(!test_and_set_bit_lock(BH_Lock, &bh->b_state));
-}
-
-static inline void lock_buffer(struct buffer_head *bh)
-{
-	might_sleep();
-	if (!trylock_buffer(bh))
-		__lock_buffer(bh);
-}
-
-extern int __set_page_dirty_buffers(struct page *page);
-
-#else /* CONFIG_BLOCK */
-
-static inline void buffer_init(void) {}
-static inline int try_to_free_buffers(struct page *page) { return 1; }
-static inline int inode_has_buffers(struct inode *inode) { return 0; }
-static inline void invalidate_inode_buffers(struct inode *inode) {}
-static inline int remove_inode_buffers(struct inode *inode) { return 1; }
-static inline int sync_mapping_buffers(struct address_space *mapping) { return 0; }
-
-#endif /* CONFIG_BLOCK */
-#endif /* _LINUX_BUFFER_HEAD_H */
diff --git a/ANDROID_3.4.5/include/linux/bug.h b/ANDROID_3.4.5/include/linux/bug.h
deleted file mode 100644
index 72961c39..00000000
--- a/ANDROID_3.4.5/include/linux/bug.h
+++ /dev/null
@@ -1,99 +0,0 @@
-#ifndef _LINUX_BUG_H
-#define _LINUX_BUG_H
-
-#include <asm/bug.h>
-
-enum bug_trap_type {
-	BUG_TRAP_TYPE_NONE = 0,
-	BUG_TRAP_TYPE_WARN = 1,
-	BUG_TRAP_TYPE_BUG = 2,
-};
-
-struct pt_regs;
-
-#ifdef __CHECKER__
-#define BUILD_BUG_ON_NOT_POWER_OF_2(n)
-#define BUILD_BUG_ON_ZERO(e) (0)
-#define BUILD_BUG_ON_NULL(e) ((void*)0)
-#define BUILD_BUG_ON(condition)
-#define BUILD_BUG() (0)
-#else /* __CHECKER__ */
-
-/* Force a compilation error if a constant expression is not a power of 2 */
-#define BUILD_BUG_ON_NOT_POWER_OF_2(n)			\
-	BUILD_BUG_ON((n) == 0 || (((n) & ((n) - 1)) != 0))
-
-/* Force a compilation error if condition is true, but also produce a
-   result (of value 0 and type size_t), so the expression can be used
-   e.g. in a structure initializer (or where-ever else comma expressions
-   aren't permitted). */
-#define BUILD_BUG_ON_ZERO(e) (sizeof(struct { int:-!!(e); }))
-#define BUILD_BUG_ON_NULL(e) ((void *)sizeof(struct { int:-!!(e); }))
-
-/**
- * BUILD_BUG_ON - break compile if a condition is true.
- * @condition: the condition which the compiler should know is false.
- *
- * If you have some code which relies on certain constants being equal, or
- * other compile-time-evaluated condition, you should use BUILD_BUG_ON to
- * detect if someone changes it.
- *
- * The implementation uses gcc's reluctance to create a negative array, but
- * gcc (as of 4.4) only emits that error for obvious cases (eg. not arguments
- * to inline functions).  So as a fallback we use the optimizer; if it can't
- * prove the condition is false, it will cause a link error on the undefined
- * "__build_bug_on_failed".  This error message can be harder to track down
- * though, hence the two different methods.
- */
-#ifndef __OPTIMIZE__
-#define BUILD_BUG_ON(condition) ((void)sizeof(char[1 - 2*!!(condition)]))
-#else
-extern int __build_bug_on_failed;
-#define BUILD_BUG_ON(condition)					\
-	do {							\
-		((void)sizeof(char[1 - 2*!!(condition)]));	\
-		if (condition) __build_bug_on_failed = 1;	\
-	} while(0)
-#endif
-
-/**
- * BUILD_BUG - break compile if used.
- *
- * If you have some code that you expect the compiler to eliminate at
- * build time, you should use BUILD_BUG to detect if it is
- * unexpectedly used.
- */
-#define BUILD_BUG()						\
-	do {							\
-		extern void __build_bug_failed(void)		\
-			__linktime_error("BUILD_BUG failed");	\
-		__build_bug_failed();				\
-	} while (0)
-
-#endif	/* __CHECKER__ */
-
-#ifdef CONFIG_GENERIC_BUG
-#include <asm-generic/bug.h>
-
-static inline int is_warning_bug(const struct bug_entry *bug)
-{
-	return bug->flags & BUGFLAG_WARNING;
-}
-
-const struct bug_entry *find_bug(unsigned long bugaddr);
-
-enum bug_trap_type report_bug(unsigned long bug_addr, struct pt_regs *regs);
-
-/* These are defined by the architecture */
-int is_valid_bugaddr(unsigned long addr);
-
-#else	/* !CONFIG_GENERIC_BUG */
-
-static inline enum bug_trap_type report_bug(unsigned long bug_addr,
-					    struct pt_regs *regs)
-{
-	return BUG_TRAP_TYPE_BUG;
-}
-
-#endif	/* CONFIG_GENERIC_BUG */
-#endif	/* _LINUX_BUG_H */
diff --git a/ANDROID_3.4.5/include/linux/byteorder/Kbuild b/ANDROID_3.4.5/include/linux/byteorder/Kbuild
deleted file mode 100644
index 5896e344..00000000
--- a/ANDROID_3.4.5/include/linux/byteorder/Kbuild
+++ /dev/null
@@ -1,2 +0,0 @@
-header-y += big_endian.h
-header-y += little_endian.h
diff --git a/ANDROID_3.4.5/include/linux/byteorder/big_endian.h b/ANDROID_3.4.5/include/linux/byteorder/big_endian.h
deleted file mode 100644
index 3c80fd7e..00000000
--- a/ANDROID_3.4.5/include/linux/byteorder/big_endian.h
+++ /dev/null
@@ -1,108 +0,0 @@
-#ifndef _LINUX_BYTEORDER_BIG_ENDIAN_H
-#define _LINUX_BYTEORDER_BIG_ENDIAN_H
-
-#ifndef __BIG_ENDIAN
-#define __BIG_ENDIAN 4321
-#endif
-#ifndef __BIG_ENDIAN_BITFIELD
-#define __BIG_ENDIAN_BITFIELD
-#endif
-
-#include <linux/types.h>
-#include <linux/swab.h>
-
-#define __constant_htonl(x) ((__force __be32)(__u32)(x))
-#define __constant_ntohl(x) ((__force __u32)(__be32)(x))
-#define __constant_htons(x) ((__force __be16)(__u16)(x))
-#define __constant_ntohs(x) ((__force __u16)(__be16)(x))
-#define __constant_cpu_to_le64(x) ((__force __le64)___constant_swab64((x)))
-#define __constant_le64_to_cpu(x) ___constant_swab64((__force __u64)(__le64)(x))
-#define __constant_cpu_to_le32(x) ((__force __le32)___constant_swab32((x)))
-#define __constant_le32_to_cpu(x) ___constant_swab32((__force __u32)(__le32)(x))
-#define __constant_cpu_to_le16(x) ((__force __le16)___constant_swab16((x)))
-#define __constant_le16_to_cpu(x) ___constant_swab16((__force __u16)(__le16)(x))
-#define __constant_cpu_to_be64(x) ((__force __be64)(__u64)(x))
-#define __constant_be64_to_cpu(x) ((__force __u64)(__be64)(x))
-#define __constant_cpu_to_be32(x) ((__force __be32)(__u32)(x))
-#define __constant_be32_to_cpu(x) ((__force __u32)(__be32)(x))
-#define __constant_cpu_to_be16(x) ((__force __be16)(__u16)(x))
-#define __constant_be16_to_cpu(x) ((__force __u16)(__be16)(x))
-#define __cpu_to_le64(x) ((__force __le64)__swab64((x)))
-#define __le64_to_cpu(x) __swab64((__force __u64)(__le64)(x))
-#define __cpu_to_le32(x) ((__force __le32)__swab32((x)))
-#define __le32_to_cpu(x) __swab32((__force __u32)(__le32)(x))
-#define __cpu_to_le16(x) ((__force __le16)__swab16((x)))
-#define __le16_to_cpu(x) __swab16((__force __u16)(__le16)(x))
-#define __cpu_to_be64(x) ((__force __be64)(__u64)(x))
-#define __be64_to_cpu(x) ((__force __u64)(__be64)(x))
-#define __cpu_to_be32(x) ((__force __be32)(__u32)(x))
-#define __be32_to_cpu(x) ((__force __u32)(__be32)(x))
-#define __cpu_to_be16(x) ((__force __be16)(__u16)(x))
-#define __be16_to_cpu(x) ((__force __u16)(__be16)(x))
-
-static inline __le64 __cpu_to_le64p(const __u64 *p)
-{
-	return (__force __le64)__swab64p(p);
-}
-static inline __u64 __le64_to_cpup(const __le64 *p)
-{
-	return __swab64p((__u64 *)p);
-}
-static inline __le32 __cpu_to_le32p(const __u32 *p)
-{
-	return (__force __le32)__swab32p(p);
-}
-static inline __u32 __le32_to_cpup(const __le32 *p)
-{
-	return __swab32p((__u32 *)p);
-}
-static inline __le16 __cpu_to_le16p(const __u16 *p)
-{
-	return (__force __le16)__swab16p(p);
-}
-static inline __u16 __le16_to_cpup(const __le16 *p)
-{
-	return __swab16p((__u16 *)p);
-}
-static inline __be64 __cpu_to_be64p(const __u64 *p)
-{
-	return (__force __be64)*p;
-}
-static inline __u64 __be64_to_cpup(const __be64 *p)
-{
-	return (__force __u64)*p;
-}
-static inline __be32 __cpu_to_be32p(const __u32 *p)
-{
-	return (__force __be32)*p;
-}
-static inline __u32 __be32_to_cpup(const __be32 *p)
-{
-	return (__force __u32)*p;
-}
-static inline __be16 __cpu_to_be16p(const __u16 *p)
-{
-	return (__force __be16)*p;
-}
-static inline __u16 __be16_to_cpup(const __be16 *p)
-{
-	return (__force __u16)*p;
-}
-#define __cpu_to_le64s(x) __swab64s((x))
-#define __le64_to_cpus(x) __swab64s((x))
-#define __cpu_to_le32s(x) __swab32s((x))
-#define __le32_to_cpus(x) __swab32s((x))
-#define __cpu_to_le16s(x) __swab16s((x))
-#define __le16_to_cpus(x) __swab16s((x))
-#define __cpu_to_be64s(x) do { (void)(x); } while (0)
-#define __be64_to_cpus(x) do { (void)(x); } while (0)
-#define __cpu_to_be32s(x) do { (void)(x); } while (0)
-#define __be32_to_cpus(x) do { (void)(x); } while (0)
-#define __cpu_to_be16s(x) do { (void)(x); } while (0)
-#define __be16_to_cpus(x) do { (void)(x); } while (0)
-
-#ifdef __KERNEL__
-#include <linux/byteorder/generic.h>
-#endif
-
-#endif /* _LINUX_BYTEORDER_BIG_ENDIAN_H */
diff --git a/ANDROID_3.4.5/include/linux/byteorder/generic.h b/ANDROID_3.4.5/include/linux/byteorder/generic.h
deleted file mode 100644
index 0846e6b9..00000000
--- a/ANDROID_3.4.5/include/linux/byteorder/generic.h
+++ /dev/null
@@ -1,173 +0,0 @@
-#ifndef _LINUX_BYTEORDER_GENERIC_H
-#define _LINUX_BYTEORDER_GENERIC_H
-
-/*
- * linux/byteorder_generic.h
- * Generic Byte-reordering support
- *
- * The "... p" macros, like le64_to_cpup, can be used with pointers
- * to unaligned data, but there will be a performance penalty on 
- * some architectures.  Use get_unaligned for unaligned data.
- *
- * Francois-Rene Rideau <fare@tunes.org> 19970707
- *    gathered all the good ideas from all asm-foo/byteorder.h into one file,
- *    cleaned them up.
- *    I hope it is compliant with non-GCC compilers.
- *    I decided to put __BYTEORDER_HAS_U64__ in byteorder.h,
- *    because I wasn't sure it would be ok to put it in types.h
- *    Upgraded it to 2.1.43
- * Francois-Rene Rideau <fare@tunes.org> 19971012
- *    Upgraded it to 2.1.57
- *    to please Linus T., replaced huge #ifdef's between little/big endian
- *    by nestedly #include'd files.
- * Francois-Rene Rideau <fare@tunes.org> 19971205
- *    Made it to 2.1.71; now a facelift:
- *    Put files under include/linux/byteorder/
- *    Split swab from generic support.
- *
- * TODO:
- *   = Regular kernel maintainers could also replace all these manual
- *    byteswap macros that remain, disseminated among drivers,
- *    after some grep or the sources...
- *   = Linus might want to rename all these macros and files to fit his taste,
- *    to fit his personal naming scheme.
- *   = it seems that a few drivers would also appreciate
- *    nybble swapping support...
- *   = every architecture could add their byteswap macro in asm/byteorder.h
- *    see how some architectures already do (i386, alpha, ppc, etc)
- *   = cpu_to_beXX and beXX_to_cpu might some day need to be well
- *    distinguished throughout the kernel. This is not the case currently,
- *    since little endian, big endian, and pdp endian machines needn't it.
- *    But this might be the case for, say, a port of Linux to 20/21 bit
- *    architectures (and F21 Linux addict around?).
- */
-
-/*
- * The following macros are to be defined by <asm/byteorder.h>:
- *
- * Conversion of long and short int between network and host format
- *	ntohl(__u32 x)
- *	ntohs(__u16 x)
- *	htonl(__u32 x)
- *	htons(__u16 x)
- * It seems that some programs (which? where? or perhaps a standard? POSIX?)
- * might like the above to be functions, not macros (why?).
- * if that's true, then detect them, and take measures.
- * Anyway, the measure is: define only ___ntohl as a macro instead,
- * and in a separate file, have
- * unsigned long inline ntohl(x){return ___ntohl(x);}
- *
- * The same for constant arguments
- *	__constant_ntohl(__u32 x)
- *	__constant_ntohs(__u16 x)
- *	__constant_htonl(__u32 x)
- *	__constant_htons(__u16 x)
- *
- * Conversion of XX-bit integers (16- 32- or 64-)
- * between native CPU format and little/big endian format
- * 64-bit stuff only defined for proper architectures
- *	cpu_to_[bl]eXX(__uXX x)
- *	[bl]eXX_to_cpu(__uXX x)
- *
- * The same, but takes a pointer to the value to convert
- *	cpu_to_[bl]eXXp(__uXX x)
- *	[bl]eXX_to_cpup(__uXX x)
- *
- * The same, but change in situ
- *	cpu_to_[bl]eXXs(__uXX x)
- *	[bl]eXX_to_cpus(__uXX x)
- *
- * See asm-foo/byteorder.h for examples of how to provide
- * architecture-optimized versions
- *
- */
-
-#define cpu_to_le64 __cpu_to_le64
-#define le64_to_cpu __le64_to_cpu
-#define cpu_to_le32 __cpu_to_le32
-#define le32_to_cpu __le32_to_cpu
-#define cpu_to_le16 __cpu_to_le16
-#define le16_to_cpu __le16_to_cpu
-#define cpu_to_be64 __cpu_to_be64
-#define be64_to_cpu __be64_to_cpu
-#define cpu_to_be32 __cpu_to_be32
-#define be32_to_cpu __be32_to_cpu
-#define cpu_to_be16 __cpu_to_be16
-#define be16_to_cpu __be16_to_cpu
-#define cpu_to_le64p __cpu_to_le64p
-#define le64_to_cpup __le64_to_cpup
-#define cpu_to_le32p __cpu_to_le32p
-#define le32_to_cpup __le32_to_cpup
-#define cpu_to_le16p __cpu_to_le16p
-#define le16_to_cpup __le16_to_cpup
-#define cpu_to_be64p __cpu_to_be64p
-#define be64_to_cpup __be64_to_cpup
-#define cpu_to_be32p __cpu_to_be32p
-#define be32_to_cpup __be32_to_cpup
-#define cpu_to_be16p __cpu_to_be16p
-#define be16_to_cpup __be16_to_cpup
-#define cpu_to_le64s __cpu_to_le64s
-#define le64_to_cpus __le64_to_cpus
-#define cpu_to_le32s __cpu_to_le32s
-#define le32_to_cpus __le32_to_cpus
-#define cpu_to_le16s __cpu_to_le16s
-#define le16_to_cpus __le16_to_cpus
-#define cpu_to_be64s __cpu_to_be64s
-#define be64_to_cpus __be64_to_cpus
-#define cpu_to_be32s __cpu_to_be32s
-#define be32_to_cpus __be32_to_cpus
-#define cpu_to_be16s __cpu_to_be16s
-#define be16_to_cpus __be16_to_cpus
-
-/*
- * They have to be macros in order to do the constant folding
- * correctly - if the argument passed into a inline function
- * it is no longer constant according to gcc..
- */
-
-#undef ntohl
-#undef ntohs
-#undef htonl
-#undef htons
-
-#define ___htonl(x) __cpu_to_be32(x)
-#define ___htons(x) __cpu_to_be16(x)
-#define ___ntohl(x) __be32_to_cpu(x)
-#define ___ntohs(x) __be16_to_cpu(x)
-
-#define htonl(x) ___htonl(x)
-#define ntohl(x) ___ntohl(x)
-#define htons(x) ___htons(x)
-#define ntohs(x) ___ntohs(x)
-
-static inline void le16_add_cpu(__le16 *var, u16 val)
-{
-	*var = cpu_to_le16(le16_to_cpu(*var) + val);
-}
-
-static inline void le32_add_cpu(__le32 *var, u32 val)
-{
-	*var = cpu_to_le32(le32_to_cpu(*var) + val);
-}
-
-static inline void le64_add_cpu(__le64 *var, u64 val)
-{
-	*var = cpu_to_le64(le64_to_cpu(*var) + val);
-}
-
-static inline void be16_add_cpu(__be16 *var, u16 val)
-{
-	*var = cpu_to_be16(be16_to_cpu(*var) + val);
-}
-
-static inline void be32_add_cpu(__be32 *var, u32 val)
-{
-	*var = cpu_to_be32(be32_to_cpu(*var) + val);
-}
-
-static inline void be64_add_cpu(__be64 *var, u64 val)
-{
-	*var = cpu_to_be64(be64_to_cpu(*var) + val);
-}
-
-#endif /* _LINUX_BYTEORDER_GENERIC_H */
diff --git a/ANDROID_3.4.5/include/linux/byteorder/little_endian.h b/ANDROID_3.4.5/include/linux/byteorder/little_endian.h
deleted file mode 100644
index 83195fb8..00000000
--- a/ANDROID_3.4.5/include/linux/byteorder/little_endian.h
+++ /dev/null
@@ -1,108 +0,0 @@
-#ifndef _LINUX_BYTEORDER_LITTLE_ENDIAN_H
-#define _LINUX_BYTEORDER_LITTLE_ENDIAN_H
-
-#ifndef __LITTLE_ENDIAN
-#define __LITTLE_ENDIAN 1234
-#endif
-#ifndef __LITTLE_ENDIAN_BITFIELD
-#define __LITTLE_ENDIAN_BITFIELD
-#endif
-
-#include <linux/types.h>
-#include <linux/swab.h>
-
-#define __constant_htonl(x) ((__force __be32)___constant_swab32((x)))
-#define __constant_ntohl(x) ___constant_swab32((__force __be32)(x))
-#define __constant_htons(x) ((__force __be16)___constant_swab16((x)))
-#define __constant_ntohs(x) ___constant_swab16((__force __be16)(x))
-#define __constant_cpu_to_le64(x) ((__force __le64)(__u64)(x))
-#define __constant_le64_to_cpu(x) ((__force __u64)(__le64)(x))
-#define __constant_cpu_to_le32(x) ((__force __le32)(__u32)(x))
-#define __constant_le32_to_cpu(x) ((__force __u32)(__le32)(x))
-#define __constant_cpu_to_le16(x) ((__force __le16)(__u16)(x))
-#define __constant_le16_to_cpu(x) ((__force __u16)(__le16)(x))
-#define __constant_cpu_to_be64(x) ((__force __be64)___constant_swab64((x)))
-#define __constant_be64_to_cpu(x) ___constant_swab64((__force __u64)(__be64)(x))
-#define __constant_cpu_to_be32(x) ((__force __be32)___constant_swab32((x)))
-#define __constant_be32_to_cpu(x) ___constant_swab32((__force __u32)(__be32)(x))
-#define __constant_cpu_to_be16(x) ((__force __be16)___constant_swab16((x)))
-#define __constant_be16_to_cpu(x) ___constant_swab16((__force __u16)(__be16)(x))
-#define __cpu_to_le64(x) ((__force __le64)(__u64)(x))
-#define __le64_to_cpu(x) ((__force __u64)(__le64)(x))
-#define __cpu_to_le32(x) ((__force __le32)(__u32)(x))
-#define __le32_to_cpu(x) ((__force __u32)(__le32)(x))
-#define __cpu_to_le16(x) ((__force __le16)(__u16)(x))
-#define __le16_to_cpu(x) ((__force __u16)(__le16)(x))
-#define __cpu_to_be64(x) ((__force __be64)__swab64((x)))
-#define __be64_to_cpu(x) __swab64((__force __u64)(__be64)(x))
-#define __cpu_to_be32(x) ((__force __be32)__swab32((x)))
-#define __be32_to_cpu(x) __swab32((__force __u32)(__be32)(x))
-#define __cpu_to_be16(x) ((__force __be16)__swab16((x)))
-#define __be16_to_cpu(x) __swab16((__force __u16)(__be16)(x))
-
-static inline __le64 __cpu_to_le64p(const __u64 *p)
-{
-	return (__force __le64)*p;
-}
-static inline __u64 __le64_to_cpup(const __le64 *p)
-{
-	return (__force __u64)*p;
-}
-static inline __le32 __cpu_to_le32p(const __u32 *p)
-{
-	return (__force __le32)*p;
-}
-static inline __u32 __le32_to_cpup(const __le32 *p)
-{
-	return (__force __u32)*p;
-}
-static inline __le16 __cpu_to_le16p(const __u16 *p)
-{
-	return (__force __le16)*p;
-}
-static inline __u16 __le16_to_cpup(const __le16 *p)
-{
-	return (__force __u16)*p;
-}
-static inline __be64 __cpu_to_be64p(const __u64 *p)
-{
-	return (__force __be64)__swab64p(p);
-}
-static inline __u64 __be64_to_cpup(const __be64 *p)
-{
-	return __swab64p((__u64 *)p);
-}
-static inline __be32 __cpu_to_be32p(const __u32 *p)
-{
-	return (__force __be32)__swab32p(p);
-}
-static inline __u32 __be32_to_cpup(const __be32 *p)
-{
-	return __swab32p((__u32 *)p);
-}
-static inline __be16 __cpu_to_be16p(const __u16 *p)
-{
-	return (__force __be16)__swab16p(p);
-}
-static inline __u16 __be16_to_cpup(const __be16 *p)
-{
-	return __swab16p((__u16 *)p);
-}
-#define __cpu_to_le64s(x) do { (void)(x); } while (0)
-#define __le64_to_cpus(x) do { (void)(x); } while (0)
-#define __cpu_to_le32s(x) do { (void)(x); } while (0)
-#define __le32_to_cpus(x) do { (void)(x); } while (0)
-#define __cpu_to_le16s(x) do { (void)(x); } while (0)
-#define __le16_to_cpus(x) do { (void)(x); } while (0)
-#define __cpu_to_be64s(x) __swab64s((x))
-#define __be64_to_cpus(x) __swab64s((x))
-#define __cpu_to_be32s(x) __swab32s((x))
-#define __be32_to_cpus(x) __swab32s((x))
-#define __cpu_to_be16s(x) __swab16s((x))
-#define __be16_to_cpus(x) __swab16s((x))
-
-#ifdef __KERNEL__
-#include <linux/byteorder/generic.h>
-#endif
-
-#endif /* _LINUX_BYTEORDER_LITTLE_ENDIAN_H */
diff --git a/ANDROID_3.4.5/include/linux/c2port.h b/ANDROID_3.4.5/include/linux/c2port.h
deleted file mode 100644
index 4efabcb5..00000000
--- a/ANDROID_3.4.5/include/linux/c2port.h
+++ /dev/null
@@ -1,66 +0,0 @@
-/*
- *  Silicon Labs C2 port Linux support
- *
- *  Copyright (c) 2007 Rodolfo Giometti <giometti@linux.it>
- *  Copyright (c) 2007 Eurotech S.p.A. <info@eurotech.it>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation
- */
-
-#include <linux/kmemcheck.h>
-
-#define C2PORT_NAME_LEN			32
-
-struct device;
-
-/*
- * C2 port basic structs
- */
-
-/* Main struct */
-struct c2port_ops;
-struct c2port_device {
-	kmemcheck_bitfield_begin(flags);
-	unsigned int access:1;
-	unsigned int flash_access:1;
-	kmemcheck_bitfield_end(flags);
-
-	int id;
-	char name[C2PORT_NAME_LEN];
-	struct c2port_ops *ops;
-	struct mutex mutex;		/* prevent races during read/write */
-
-	struct device *dev;
-
-	void *private_data;
-};
-
-/* Basic operations */
-struct c2port_ops {
-	/* Flash layout */
-	unsigned short block_size;	/* flash block size in bytes */
-	unsigned short blocks_num;	/* flash blocks number */
-
-	/* Enable or disable the access to C2 port */
-	void (*access)(struct c2port_device *dev, int status);
-
-	/* Set C2D data line as input/output */
-	void (*c2d_dir)(struct c2port_device *dev, int dir);
-
-	/* Read/write C2D data line */
-	int (*c2d_get)(struct c2port_device *dev);
-	void (*c2d_set)(struct c2port_device *dev, int status);
-
-	/* Write C2CK clock line */
-	void (*c2ck_set)(struct c2port_device *dev, int status);
-};
-
-/*
- * Exported functions
- */
-
-extern struct c2port_device *c2port_device_register(char *name,
-					struct c2port_ops *ops, void *devdata);
-extern void c2port_device_unregister(struct c2port_device *dev);
diff --git a/ANDROID_3.4.5/include/linux/cache.h b/ANDROID_3.4.5/include/linux/cache.h
deleted file mode 100644
index 4c570653..00000000
--- a/ANDROID_3.4.5/include/linux/cache.h
+++ /dev/null
@@ -1,67 +0,0 @@
-#ifndef __LINUX_CACHE_H
-#define __LINUX_CACHE_H
-
-#include <linux/kernel.h>
-#include <asm/cache.h>
-
-#ifndef L1_CACHE_ALIGN
-#define L1_CACHE_ALIGN(x) ALIGN(x, L1_CACHE_BYTES)
-#endif
-
-#ifndef SMP_CACHE_BYTES
-#define SMP_CACHE_BYTES L1_CACHE_BYTES
-#endif
-
-#ifndef __read_mostly
-#define __read_mostly
-#endif
-
-#ifndef ____cacheline_aligned
-#define ____cacheline_aligned __attribute__((__aligned__(SMP_CACHE_BYTES)))
-#endif
-
-#ifndef ____cacheline_aligned_in_smp
-#ifdef CONFIG_SMP
-#define ____cacheline_aligned_in_smp ____cacheline_aligned
-#else
-#define ____cacheline_aligned_in_smp
-#endif /* CONFIG_SMP */
-#endif
-
-#ifndef __cacheline_aligned
-#define __cacheline_aligned					\
-  __attribute__((__aligned__(SMP_CACHE_BYTES),			\
-		 __section__(".data..cacheline_aligned")))
-#endif /* __cacheline_aligned */
-
-#ifndef __cacheline_aligned_in_smp
-#ifdef CONFIG_SMP
-#define __cacheline_aligned_in_smp __cacheline_aligned
-#else
-#define __cacheline_aligned_in_smp
-#endif /* CONFIG_SMP */
-#endif
-
-/*
- * The maximum alignment needed for some critical structures
- * These could be inter-node cacheline sizes/L3 cacheline
- * size etc.  Define this in asm/cache.h for your arch
- */
-#ifndef INTERNODE_CACHE_SHIFT
-#define INTERNODE_CACHE_SHIFT L1_CACHE_SHIFT
-#endif
-
-#if !defined(____cacheline_internodealigned_in_smp)
-#if defined(CONFIG_SMP)
-#define ____cacheline_internodealigned_in_smp \
-	__attribute__((__aligned__(1 << (INTERNODE_CACHE_SHIFT))))
-#else
-#define ____cacheline_internodealigned_in_smp
-#endif
-#endif
-
-#ifndef CONFIG_ARCH_HAS_CACHE_LINE_SIZE
-#define cache_line_size()	L1_CACHE_BYTES
-#endif
-
-#endif /* __LINUX_CACHE_H */
diff --git a/ANDROID_3.4.5/include/linux/caif/Kbuild b/ANDROID_3.4.5/include/linux/caif/Kbuild
deleted file mode 100644
index a9cf2506..00000000
--- a/ANDROID_3.4.5/include/linux/caif/Kbuild
+++ /dev/null
@@ -1,2 +0,0 @@
-header-y += caif_socket.h
-header-y += if_caif.h
diff --git a/ANDROID_3.4.5/include/linux/caif/caif_socket.h b/ANDROID_3.4.5/include/linux/caif/caif_socket.h
deleted file mode 100644
index 3f3bac6a..00000000
--- a/ANDROID_3.4.5/include/linux/caif/caif_socket.h
+++ /dev/null
@@ -1,194 +0,0 @@
-/* linux/caif_socket.h
- * CAIF Definitions for CAIF socket and network layer
- * Copyright (C) ST-Ericsson AB 2010
- * Author:	 Sjur Brendeland/ sjur.brandeland@stericsson.com
- * License terms: GNU General Public License (GPL) version 2
- */
-
-#ifndef _LINUX_CAIF_SOCKET_H
-#define _LINUX_CAIF_SOCKET_H
-
-#include <linux/types.h>
-#include <linux/socket.h>
-
-/**
- * enum caif_link_selector -    Physical Link Selection.
- * @CAIF_LINK_HIGH_BANDW:	Physical interface for high-bandwidth
- *				traffic.
- * @CAIF_LINK_LOW_LATENCY:	Physical interface for low-latency
- *				traffic.
- *
- * CAIF Link Layers can register their link properties.
- * This enum is used for choosing between CAIF Link Layers when
- * setting up CAIF Channels when multiple CAIF Link Layers exists.
- */
-enum caif_link_selector {
-	CAIF_LINK_HIGH_BANDW,
-	CAIF_LINK_LOW_LATENCY
-};
-
-/**
- * enum caif_channel_priority - CAIF channel priorities.
- *
- * @CAIF_PRIO_MIN:	Min priority for a channel.
- * @CAIF_PRIO_LOW:	Low-priority channel.
- * @CAIF_PRIO_NORMAL:	Normal/default priority level.
- * @CAIF_PRIO_HIGH:	High priority level
- * @CAIF_PRIO_MAX:	Max priority for channel
- *
- * Priority can be set on CAIF Channels in order to
- * prioritize between traffic on different CAIF Channels.
- * These priority levels are recommended, but the priority value
- * is not restricted to the values defined in this enum, any value
- * between CAIF_PRIO_MIN and CAIF_PRIO_MAX could be used.
- */
-enum caif_channel_priority {
-	CAIF_PRIO_MIN	 = 0x01,
-	CAIF_PRIO_LOW	 = 0x04,
-	CAIF_PRIO_NORMAL = 0x0f,
-	CAIF_PRIO_HIGH	 = 0x14,
-	CAIF_PRIO_MAX	 = 0x1F
-};
-
-/**
- * enum caif_protocol_type  -	CAIF Channel type.
- * @CAIFPROTO_AT:		Classic AT channel.
- * @CAIFPROTO_DATAGRAM:	Datagram channel.
- * @CAIFPROTO_DATAGRAM_LOOP:	Datagram loopback channel, used for testing.
- * @CAIFPROTO_UTIL:		Utility (Psock) channel.
- * @CAIFPROTO_RFM:		Remote File Manager
- * @CAIFPROTO_DEBUG:		Debug link
- *
- * This enum defines the CAIF Channel type to be used. This defines
- * the service to connect to on the modem.
- */
-enum caif_protocol_type {
-	CAIFPROTO_AT,
-	CAIFPROTO_DATAGRAM,
-	CAIFPROTO_DATAGRAM_LOOP,
-	CAIFPROTO_UTIL,
-	CAIFPROTO_RFM,
-	CAIFPROTO_DEBUG,
-	_CAIFPROTO_MAX
-};
-#define	CAIFPROTO_MAX _CAIFPROTO_MAX
-
-/**
- * enum caif_at_type - AT Service Endpoint
- * @CAIF_ATTYPE_PLAIN:	     Connects to a plain vanilla AT channel.
- */
-enum caif_at_type {
-	CAIF_ATTYPE_PLAIN = 2
-};
- /**
- * enum caif_debug_type - Content selection for debug connection
- * @CAIF_DEBUG_TRACE_INTERACTIVE: Connection will contain
- *				both trace and interactive debug.
- * @CAIF_DEBUG_TRACE:		Connection contains trace only.
- * @CAIF_DEBUG_INTERACTIVE:	Connection to interactive debug.
- */
-enum caif_debug_type {
-	CAIF_DEBUG_TRACE_INTERACTIVE = 0,
-	CAIF_DEBUG_TRACE,
-	CAIF_DEBUG_INTERACTIVE,
-};
-
-/**
- * enum caif_debug_service - Debug Service Endpoint
- * @CAIF_RADIO_DEBUG_SERVICE:	Debug service on the Radio sub-system
- * @CAIF_APP_DEBUG_SERVICE:	Debug for the applications sub-system
- */
-enum caif_debug_service {
-	CAIF_RADIO_DEBUG_SERVICE = 1,
-	CAIF_APP_DEBUG_SERVICE
-};
-
-/**
- * struct sockaddr_caif - the sockaddr structure for CAIF sockets.
- * @family:		     Address family number, must be AF_CAIF.
- * @u:			     Union of address data 'switched' by family.
- * :
- * @u.at:                    Applies when family = CAIFPROTO_AT.
- *
- * @u.at.type:               Type of AT link to set up (enum caif_at_type).
- *
- * @u.util:                  Applies when family = CAIFPROTO_UTIL
- *
- * @u.util.service:          Utility service name.
- *
- * @u.dgm:                   Applies when family = CAIFPROTO_DATAGRAM
- *
- * @u.dgm.connection_id:     Datagram connection id.
- *
- * @u.dgm.nsapi:             NSAPI of the PDP-Context.
- *
- * @u.rfm:                   Applies when family = CAIFPROTO_RFM
- *
- * @u.rfm.connection_id:     Connection ID for RFM.
- *
- * @u.rfm.volume:            Volume to mount.
- *
- * @u.dbg:		      Applies when family = CAIFPROTO_DEBUG.
- *
- * @u.dbg.type:			     Type of debug connection to set up
- *			      (caif_debug_type).
- *
- * @u.dbg.service:	      Service sub-system to connect (caif_debug_service
- * Description:
- * This structure holds the connect parameters used for setting up a
- * CAIF Channel. It defines the service to connect to on the modem.
- */
-struct sockaddr_caif {
-	__kernel_sa_family_t  family;
-	union {
-		struct {
-			__u8  type;		/* type: enum caif_at_type */
-		} at;				/* CAIFPROTO_AT */
-		struct {
-			char	  service[16];
-		} util;				/* CAIFPROTO_UTIL */
-		union {
-			__u32 connection_id;
-			__u8  nsapi;
-		} dgm;				/* CAIFPROTO_DATAGRAM(_LOOP)*/
-		struct {
-			__u32 connection_id;
-			char	  volume[16];
-		} rfm;				/* CAIFPROTO_RFM */
-		struct {
-			__u8  type;		/* type:enum caif_debug_type */
-			__u8  service;		/* service:caif_debug_service */
-		} dbg;				/* CAIFPROTO_DEBUG */
-	} u;
-};
-
-/**
- * enum caif_socket_opts - CAIF option values for getsockopt and setsockopt.
- *
- * @CAIFSO_LINK_SELECT:		Selector used if multiple CAIF Link layers are
- *				available. Either a high bandwidth
- *				link can be selected (CAIF_LINK_HIGH_BANDW) or
- *				or a low latency link (CAIF_LINK_LOW_LATENCY).
- *                              This option is of type __u32.
- *				Alternatively SO_BINDTODEVICE can be used.
- *
- * @CAIFSO_REQ_PARAM:		Used to set the request parameters for a
- *				utility channel. (maximum 256 bytes). This
- *				option must be set before connecting.
- *
- * @CAIFSO_RSP_PARAM:		Gets the response parameters for a utility
- *				channel. (maximum 256 bytes). This option
- *				is valid after a successful connect.
- *
- *
- * This enum defines the CAIF Socket options to be used on a socket
- * of type PF_CAIF.
- *
- */
-enum caif_socket_opts {
-	CAIFSO_LINK_SELECT	= 127,
-	CAIFSO_REQ_PARAM	= 128,
-	CAIFSO_RSP_PARAM	= 129,
-};
-
-#endif /* _LINUX_CAIF_SOCKET_H */
diff --git a/ANDROID_3.4.5/include/linux/caif/if_caif.h b/ANDROID_3.4.5/include/linux/caif/if_caif.h
deleted file mode 100644
index 5e7eed4e..00000000
--- a/ANDROID_3.4.5/include/linux/caif/if_caif.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson AB 2010
- * Author:	Sjur Brendeland/ sjur.brandeland@stericsson.com
- * License terms: GNU General Public License (GPL) version 2
- */
-
-#ifndef IF_CAIF_H_
-#define IF_CAIF_H_
-#include <linux/sockios.h>
-#include <linux/types.h>
-#include <linux/socket.h>
-
-/**
- * enum ifla_caif - CAIF NetlinkRT parameters.
- * @IFLA_CAIF_IPV4_CONNID:  Connection ID for IPv4 PDP Context.
- *			    The type of attribute is NLA_U32.
- * @IFLA_CAIF_IPV6_CONNID:  Connection ID for IPv6 PDP Context.
- *			    The type of attribute is NLA_U32.
- * @IFLA_CAIF_LOOPBACK:	    If different from zero, device is doing loopback
- *			    The type of attribute is NLA_U8.
- *
- * When using RT Netlink to create, destroy or configure a CAIF IP interface,
- * enum ifla_caif is used to specify the configuration attributes.
- */
-enum ifla_caif {
-	__IFLA_CAIF_UNSPEC,
-	IFLA_CAIF_IPV4_CONNID,
-	IFLA_CAIF_IPV6_CONNID,
-	IFLA_CAIF_LOOPBACK,
-	__IFLA_CAIF_MAX
-};
-#define	IFLA_CAIF_MAX (__IFLA_CAIF_MAX-1)
-
-#endif /*IF_CAIF_H_*/
diff --git a/ANDROID_3.4.5/include/linux/can.h b/ANDROID_3.4.5/include/linux/can.h
deleted file mode 100644
index 9a19bcb3..00000000
--- a/ANDROID_3.4.5/include/linux/can.h
+++ /dev/null
@@ -1,109 +0,0 @@
-/*
- * linux/can.h
- *
- * Definitions for CAN network layer (socket addr / CAN frame / CAN filter)
- *
- * Authors: Oliver Hartkopp <oliver.hartkopp@volkswagen.de>
- *          Urs Thuermann   <urs.thuermann@volkswagen.de>
- * Copyright (c) 2002-2007 Volkswagen Group Electronic Research
- * All rights reserved.
- *
- */
-
-#ifndef CAN_H
-#define CAN_H
-
-#include <linux/types.h>
-#include <linux/socket.h>
-
-/* controller area network (CAN) kernel definitions */
-
-/* special address description flags for the CAN_ID */
-#define CAN_EFF_FLAG 0x80000000U /* EFF/SFF is set in the MSB */
-#define CAN_RTR_FLAG 0x40000000U /* remote transmission request */
-#define CAN_ERR_FLAG 0x20000000U /* error frame */
-
-/* valid bits in CAN ID for frame formats */
-#define CAN_SFF_MASK 0x000007FFU /* standard frame format (SFF) */
-#define CAN_EFF_MASK 0x1FFFFFFFU /* extended frame format (EFF) */
-#define CAN_ERR_MASK 0x1FFFFFFFU /* omit EFF, RTR, ERR flags */
-
-/*
- * Controller Area Network Identifier structure
- *
- * bit 0-28	: CAN identifier (11/29 bit)
- * bit 29	: error frame flag (0 = data frame, 1 = error frame)
- * bit 30	: remote transmission request flag (1 = rtr frame)
- * bit 31	: frame format flag (0 = standard 11 bit, 1 = extended 29 bit)
- */
-typedef __u32 canid_t;
-
-/*
- * Controller Area Network Error Frame Mask structure
- *
- * bit 0-28	: error class mask (see include/linux/can/error.h)
- * bit 29-31	: set to zero
- */
-typedef __u32 can_err_mask_t;
-
-/**
- * struct can_frame - basic CAN frame structure
- * @can_id:  the CAN ID of the frame and CAN_*_FLAG flags, see above.
- * @can_dlc: the data length field of the CAN frame
- * @data:    the CAN frame payload.
- */
-struct can_frame {
-	canid_t can_id;  /* 32 bit CAN_ID + EFF/RTR/ERR flags */
-	__u8    can_dlc; /* data length code: 0 .. 8 */
-	__u8    data[8] __attribute__((aligned(8)));
-};
-
-/* particular protocols of the protocol family PF_CAN */
-#define CAN_RAW		1 /* RAW sockets */
-#define CAN_BCM		2 /* Broadcast Manager */
-#define CAN_TP16	3 /* VAG Transport Protocol v1.6 */
-#define CAN_TP20	4 /* VAG Transport Protocol v2.0 */
-#define CAN_MCNET	5 /* Bosch MCNet */
-#define CAN_ISOTP	6 /* ISO 15765-2 Transport Protocol */
-#define CAN_NPROTO	7
-
-#define SOL_CAN_BASE 100
-
-/**
- * struct sockaddr_can - the sockaddr structure for CAN sockets
- * @can_family:  address family number AF_CAN.
- * @can_ifindex: CAN network interface index.
- * @can_addr:    protocol specific address information
- */
-struct sockaddr_can {
-	__kernel_sa_family_t can_family;
-	int         can_ifindex;
-	union {
-		/* transport protocol class address information (e.g. ISOTP) */
-		struct { canid_t rx_id, tx_id; } tp;
-
-		/* reserved for future CAN protocols address information */
-	} can_addr;
-};
-
-/**
- * struct can_filter - CAN ID based filter in can_register().
- * @can_id:   relevant bits of CAN ID which are not masked out.
- * @can_mask: CAN mask (see description)
- *
- * Description:
- * A filter matches, when
- *
- *          <received_can_id> & mask == can_id & mask
- *
- * The filter can be inverted (CAN_INV_FILTER bit set in can_id) or it can
- * filter for error frames (CAN_ERR_FLAG bit set in mask).
- */
-struct can_filter {
-	canid_t can_id;
-	canid_t can_mask;
-};
-
-#define CAN_INV_FILTER 0x20000000U /* to be set in can_filter.can_id */
-
-#endif /* CAN_H */
diff --git a/ANDROID_3.4.5/include/linux/can/Kbuild b/ANDROID_3.4.5/include/linux/can/Kbuild
deleted file mode 100644
index c62b7f17..00000000
--- a/ANDROID_3.4.5/include/linux/can/Kbuild
+++ /dev/null
@@ -1,5 +0,0 @@
-header-y += raw.h
-header-y += bcm.h
-header-y += gw.h
-header-y += error.h
-header-y += netlink.h
diff --git a/ANDROID_3.4.5/include/linux/can/bcm.h b/ANDROID_3.4.5/include/linux/can/bcm.h
deleted file mode 100644
index 3ebe387f..00000000
--- a/ANDROID_3.4.5/include/linux/can/bcm.h
+++ /dev/null
@@ -1,66 +0,0 @@
-/*
- * linux/can/bcm.h
- *
- * Definitions for CAN Broadcast Manager (BCM)
- *
- * Author: Oliver Hartkopp <oliver.hartkopp@volkswagen.de>
- * Copyright (c) 2002-2007 Volkswagen Group Electronic Research
- * All rights reserved.
- *
- */
-
-#ifndef CAN_BCM_H
-#define CAN_BCM_H
-
-#include <linux/types.h>
-#include <linux/can.h>
-
-/**
- * struct bcm_msg_head - head of messages to/from the broadcast manager
- * @opcode:    opcode, see enum below.
- * @flags:     special flags, see below.
- * @count:     number of frames to send before changing interval.
- * @ival1:     interval for the first @count frames.
- * @ival2:     interval for the following frames.
- * @can_id:    CAN ID of frames to be sent or received.
- * @nframes:   number of frames appended to the message head.
- * @frames:    array of CAN frames.
- */
-struct bcm_msg_head {
-	__u32 opcode;
-	__u32 flags;
-	__u32 count;
-	struct timeval ival1, ival2;
-	canid_t can_id;
-	__u32 nframes;
-	struct can_frame frames[0];
-};
-
-enum {
-	TX_SETUP = 1,	/* create (cyclic) transmission task */
-	TX_DELETE,	/* remove (cyclic) transmission task */
-	TX_READ,	/* read properties of (cyclic) transmission task */
-	TX_SEND,	/* send one CAN frame */
-	RX_SETUP,	/* create RX content filter subscription */
-	RX_DELETE,	/* remove RX content filter subscription */
-	RX_READ,	/* read properties of RX content filter subscription */
-	TX_STATUS,	/* reply to TX_READ request */
-	TX_EXPIRED,	/* notification on performed transmissions (count=0) */
-	RX_STATUS,	/* reply to RX_READ request */
-	RX_TIMEOUT,	/* cyclic message is absent */
-	RX_CHANGED	/* updated CAN frame (detected content change) */
-};
-
-#define SETTIMER            0x0001
-#define STARTTIMER          0x0002
-#define TX_COUNTEVT         0x0004
-#define TX_ANNOUNCE         0x0008
-#define TX_CP_CAN_ID        0x0010
-#define RX_FILTER_ID        0x0020
-#define RX_CHECK_DLC        0x0040
-#define RX_NO_AUTOTIMER     0x0080
-#define RX_ANNOUNCE_RESUME  0x0100
-#define TX_RESET_MULTI_IDX  0x0200
-#define RX_RTR_FRAME        0x0400
-
-#endif /* CAN_BCM_H */
diff --git a/ANDROID_3.4.5/include/linux/can/core.h b/ANDROID_3.4.5/include/linux/can/core.h
deleted file mode 100644
index 0ccc1cd2..00000000
--- a/ANDROID_3.4.5/include/linux/can/core.h
+++ /dev/null
@@ -1,61 +0,0 @@
-/*
- * linux/can/core.h
- *
- * Protoypes and definitions for CAN protocol modules using the PF_CAN core
- *
- * Authors: Oliver Hartkopp <oliver.hartkopp@volkswagen.de>
- *          Urs Thuermann   <urs.thuermann@volkswagen.de>
- * Copyright (c) 2002-2007 Volkswagen Group Electronic Research
- * All rights reserved.
- *
- */
-
-#ifndef CAN_CORE_H
-#define CAN_CORE_H
-
-#include <linux/can.h>
-#include <linux/skbuff.h>
-#include <linux/netdevice.h>
-
-#define CAN_VERSION "20090105"
-
-/* increment this number each time you change some user-space interface */
-#define CAN_ABI_VERSION "8"
-
-#define CAN_VERSION_STRING "rev " CAN_VERSION " abi " CAN_ABI_VERSION
-
-#define DNAME(dev) ((dev) ? (dev)->name : "any")
-
-/**
- * struct can_proto - CAN protocol structure
- * @type:       type argument in socket() syscall, e.g. SOCK_DGRAM.
- * @protocol:   protocol number in socket() syscall.
- * @ops:        pointer to struct proto_ops for sock->ops.
- * @prot:       pointer to struct proto structure.
- */
-struct can_proto {
-	int type;
-	int protocol;
-	const struct proto_ops *ops;
-	struct proto *prot;
-};
-
-/* function prototypes for the CAN networklayer core (af_can.c) */
-
-extern int  can_proto_register(const struct can_proto *cp);
-extern void can_proto_unregister(const struct can_proto *cp);
-
-extern int  can_rx_register(struct net_device *dev, canid_t can_id,
-			    canid_t mask,
-			    void (*func)(struct sk_buff *, void *),
-			    void *data, char *ident);
-
-extern void can_rx_unregister(struct net_device *dev, canid_t can_id,
-			      canid_t mask,
-			      void (*func)(struct sk_buff *, void *),
-			      void *data);
-
-extern int can_send(struct sk_buff *skb, int loop);
-extern int can_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg);
-
-#endif /* CAN_CORE_H */
diff --git a/ANDROID_3.4.5/include/linux/can/dev.h b/ANDROID_3.4.5/include/linux/can/dev.h
deleted file mode 100644
index 5d2efe7e..00000000
--- a/ANDROID_3.4.5/include/linux/can/dev.h
+++ /dev/null
@@ -1,102 +0,0 @@
-/*
- * linux/can/dev.h
- *
- * Definitions for the CAN network device driver interface
- *
- * Copyright (C) 2006 Andrey Volkov <avolkov@varma-el.com>
- *               Varma Electronics Oy
- *
- * Copyright (C) 2008 Wolfgang Grandegger <wg@grandegger.com>
- *
- */
-
-#ifndef CAN_DEV_H
-#define CAN_DEV_H
-
-#include <linux/can.h>
-#include <linux/can/netlink.h>
-#include <linux/can/error.h>
-
-/*
- * CAN mode
- */
-enum can_mode {
-	CAN_MODE_STOP = 0,
-	CAN_MODE_START,
-	CAN_MODE_SLEEP
-};
-
-/*
- * CAN common private data
- */
-struct can_priv {
-	struct can_device_stats can_stats;
-
-	struct can_bittiming bittiming;
-	struct can_bittiming_const *bittiming_const;
-	struct can_clock clock;
-
-	enum can_state state;
-	u32 ctrlmode;
-	u32 ctrlmode_supported;
-
-	int restart_ms;
-	struct timer_list restart_timer;
-
-	int (*do_set_bittiming)(struct net_device *dev);
-	int (*do_set_mode)(struct net_device *dev, enum can_mode mode);
-	int (*do_get_state)(const struct net_device *dev,
-			    enum can_state *state);
-	int (*do_get_berr_counter)(const struct net_device *dev,
-				   struct can_berr_counter *bec);
-
-	unsigned int echo_skb_max;
-	struct sk_buff **echo_skb;
-};
-
-/*
- * get_can_dlc(value) - helper macro to cast a given data length code (dlc)
- * to __u8 and ensure the dlc value to be max. 8 bytes.
- *
- * To be used in the CAN netdriver receive path to ensure conformance with
- * ISO 11898-1 Chapter 8.4.2.3 (DLC field)
- */
-#define get_can_dlc(i)	(min_t(__u8, (i), 8))
-
-/* Drop a given socketbuffer if it does not contain a valid CAN frame. */
-static inline int can_dropped_invalid_skb(struct net_device *dev,
-					  struct sk_buff *skb)
-{
-	const struct can_frame *cf = (struct can_frame *)skb->data;
-
-	if (unlikely(skb->len != sizeof(*cf) || cf->can_dlc > 8)) {
-		kfree_skb(skb);
-		dev->stats.tx_dropped++;
-		return 1;
-	}
-
-	return 0;
-}
-
-struct net_device *alloc_candev(int sizeof_priv, unsigned int echo_skb_max);
-void free_candev(struct net_device *dev);
-
-int open_candev(struct net_device *dev);
-void close_candev(struct net_device *dev);
-
-int register_candev(struct net_device *dev);
-void unregister_candev(struct net_device *dev);
-
-int can_restart_now(struct net_device *dev);
-void can_bus_off(struct net_device *dev);
-
-void can_put_echo_skb(struct sk_buff *skb, struct net_device *dev,
-		      unsigned int idx);
-unsigned int can_get_echo_skb(struct net_device *dev, unsigned int idx);
-void can_free_echo_skb(struct net_device *dev, unsigned int idx);
-
-struct sk_buff *alloc_can_skb(struct net_device *dev, struct can_frame **cf);
-struct sk_buff *alloc_can_err_skb(struct net_device *dev,
-				  struct can_frame **cf);
-
-#endif /* CAN_DEV_H */
diff --git a/ANDROID_3.4.5/include/linux/can/error.h b/ANDROID_3.4.5/include/linux/can/error.h
deleted file mode 100644
index 63e855ea..00000000
--- a/ANDROID_3.4.5/include/linux/can/error.h
+++ /dev/null
@@ -1,91 +0,0 @@
-/*
- * linux/can/error.h
- *
- * Definitions of the CAN error frame to be filtered and passed to the user.
- *
- * Author: Oliver Hartkopp <oliver.hartkopp@volkswagen.de>
- * Copyright (c) 2002-2007 Volkswagen Group Electronic Research
- * All rights reserved.
- *
- */
-
-#ifndef CAN_ERROR_H
-#define CAN_ERROR_H
-
-#define CAN_ERR_DLC 8 /* dlc for error frames */
-
-/* error class (mask) in can_id */
-#define CAN_ERR_TX_TIMEOUT   0x00000001U /* TX timeout (by netdevice driver) */
-#define CAN_ERR_LOSTARB      0x00000002U /* lost arbitration    / data[0]    */
-#define CAN_ERR_CRTL         0x00000004U /* controller problems / data[1]    */
-#define CAN_ERR_PROT         0x00000008U /* protocol violations / data[2..3] */
-#define CAN_ERR_TRX          0x00000010U /* transceiver status  / data[4]    */
-#define CAN_ERR_ACK          0x00000020U /* received no ACK on transmission */
-#define CAN_ERR_BUSOFF       0x00000040U /* bus off */
-#define CAN_ERR_BUSERROR     0x00000080U /* bus error (may flood!) */
-#define CAN_ERR_RESTARTED    0x00000100U /* controller restarted */
-
-/* arbitration lost in bit ... / data[0] */
-#define CAN_ERR_LOSTARB_UNSPEC   0x00 /* unspecified */
-				      /* else bit number in bitstream */
-
-/* error status of CAN-controller / data[1] */
-#define CAN_ERR_CRTL_UNSPEC      0x00 /* unspecified */
-#define CAN_ERR_CRTL_RX_OVERFLOW 0x01 /* RX buffer overflow */
-#define CAN_ERR_CRTL_TX_OVERFLOW 0x02 /* TX buffer overflow */
-#define CAN_ERR_CRTL_RX_WARNING  0x04 /* reached warning level for RX errors */
-#define CAN_ERR_CRTL_TX_WARNING  0x08 /* reached warning level for TX errors */
-#define CAN_ERR_CRTL_RX_PASSIVE  0x10 /* reached error passive status RX */
-#define CAN_ERR_CRTL_TX_PASSIVE  0x20 /* reached error passive status TX */
-				      /* (at least one error counter exceeds */
-				      /* the protocol-defined level of 127)  */
-
-/* error in CAN protocol (type) / data[2] */
-#define CAN_ERR_PROT_UNSPEC      0x00 /* unspecified */
-#define CAN_ERR_PROT_BIT         0x01 /* single bit error */
-#define CAN_ERR_PROT_FORM        0x02 /* frame format error */
-#define CAN_ERR_PROT_STUFF       0x04 /* bit stuffing error */
-#define CAN_ERR_PROT_BIT0        0x08 /* unable to send dominant bit */
-#define CAN_ERR_PROT_BIT1        0x10 /* unable to send recessive bit */
-#define CAN_ERR_PROT_OVERLOAD    0x20 /* bus overload */
-#define CAN_ERR_PROT_ACTIVE      0x40 /* active error announcement */
-#define CAN_ERR_PROT_TX          0x80 /* error occurred on transmission */
-
-/* error in CAN protocol (location) / data[3] */
-#define CAN_ERR_PROT_LOC_UNSPEC  0x00 /* unspecified */
-#define CAN_ERR_PROT_LOC_SOF     0x03 /* start of frame */
-#define CAN_ERR_PROT_LOC_ID28_21 0x02 /* ID bits 28 - 21 (SFF: 10 - 3) */
-#define CAN_ERR_PROT_LOC_ID20_18 0x06 /* ID bits 20 - 18 (SFF: 2 - 0 )*/
-#define CAN_ERR_PROT_LOC_SRTR    0x04 /* substitute RTR (SFF: RTR) */
-#define CAN_ERR_PROT_LOC_IDE     0x05 /* identifier extension */
-#define CAN_ERR_PROT_LOC_ID17_13 0x07 /* ID bits 17-13 */
-#define CAN_ERR_PROT_LOC_ID12_05 0x0F /* ID bits 12-5 */
-#define CAN_ERR_PROT_LOC_ID04_00 0x0E /* ID bits 4-0 */
-#define CAN_ERR_PROT_LOC_RTR     0x0C /* RTR */
-#define CAN_ERR_PROT_LOC_RES1    0x0D /* reserved bit 1 */
-#define CAN_ERR_PROT_LOC_RES0    0x09 /* reserved bit 0 */
-#define CAN_ERR_PROT_LOC_DLC     0x0B /* data length code */
-#define CAN_ERR_PROT_LOC_DATA    0x0A /* data section */
-#define CAN_ERR_PROT_LOC_CRC_SEQ 0x08 /* CRC sequence */
-#define CAN_ERR_PROT_LOC_CRC_DEL 0x18 /* CRC delimiter */
-#define CAN_ERR_PROT_LOC_ACK     0x19 /* ACK slot */
-#define CAN_ERR_PROT_LOC_ACK_DEL 0x1B /* ACK delimiter */
-#define CAN_ERR_PROT_LOC_EOF     0x1A /* end of frame */
-#define CAN_ERR_PROT_LOC_INTERM  0x12 /* intermission */
-
-/* error status of CAN-transceiver / data[4] */
-/*                                             CANH CANL */
-#define CAN_ERR_TRX_UNSPEC             0x00 /* 0000 0000 */
-#define CAN_ERR_TRX_CANH_NO_WIRE       0x04 /* 0000 0100 */
-#define CAN_ERR_TRX_CANH_SHORT_TO_BAT  0x05 /* 0000 0101 */
-#define CAN_ERR_TRX_CANH_SHORT_TO_VCC  0x06 /* 0000 0110 */
-#define CAN_ERR_TRX_CANH_SHORT_TO_GND  0x07 /* 0000 0111 */
-#define CAN_ERR_TRX_CANL_NO_WIRE       0x40 /* 0100 0000 */
-#define CAN_ERR_TRX_CANL_SHORT_TO_BAT  0x50 /* 0101 0000 */
-#define CAN_ERR_TRX_CANL_SHORT_TO_VCC  0x60 /* 0110 0000 */
-#define CAN_ERR_TRX_CANL_SHORT_TO_GND  0x70 /* 0111 0000 */
-#define CAN_ERR_TRX_CANL_SHORT_TO_CANH 0x80 /* 1000 0000 */
-
-/* controller specific additional information / data[5..7] */
-
-#endif /* CAN_ERROR_H */
diff --git a/ANDROID_3.4.5/include/linux/can/gw.h b/ANDROID_3.4.5/include/linux/can/gw.h
deleted file mode 100644
index 8e1db18c..00000000
--- a/ANDROID_3.4.5/include/linux/can/gw.h
+++ /dev/null
@@ -1,162 +0,0 @@
-/*
- * linux/can/gw.h
- *
- * Definitions for CAN frame Gateway/Router/Bridge
- *
- * Author: Oliver Hartkopp <oliver.hartkopp@volkswagen.de>
- * Copyright (c) 2011 Volkswagen Group Electronic Research
- * All rights reserved.
- *
- */
-
-#ifndef CAN_GW_H
-#define CAN_GW_H
-
-#include <linux/types.h>
-#include <linux/can.h>
-
-struct rtcanmsg {
-	__u8  can_family;
-	__u8  gwtype;
-	__u16 flags;
-};
-
-/* CAN gateway types */
-enum {
-	CGW_TYPE_UNSPEC,
-	CGW_TYPE_CAN_CAN,	/* CAN->CAN routing */
-	__CGW_TYPE_MAX
-};
-
-#define CGW_TYPE_MAX (__CGW_TYPE_MAX - 1)
-
-/* CAN rtnetlink attribute definitions */
-enum {
-	CGW_UNSPEC,
-	CGW_MOD_AND,	/* CAN frame modification binary AND */
-	CGW_MOD_OR,	/* CAN frame modification binary OR */
-	CGW_MOD_XOR,	/* CAN frame modification binary XOR */
-	CGW_MOD_SET,	/* CAN frame modification set alternate values */
-	CGW_CS_XOR,	/* set data[] XOR checksum into data[index] */
-	CGW_CS_CRC8,	/* set data[] CRC8 checksum into data[index] */
-	CGW_HANDLED,	/* number of handled CAN frames */
-	CGW_DROPPED,	/* number of dropped CAN frames */
-	CGW_SRC_IF,	/* ifindex of source network interface */
-	CGW_DST_IF,	/* ifindex of destination network interface */
-	CGW_FILTER,	/* specify struct can_filter on source CAN device */
-	__CGW_MAX
-};
-
-#define CGW_MAX (__CGW_MAX - 1)
-
-#define CGW_FLAGS_CAN_ECHO 0x01
-#define CGW_FLAGS_CAN_SRC_TSTAMP 0x02
-
-#define CGW_MOD_FUNCS 4 /* AND OR XOR SET */
-
-/* CAN frame elements that are affected by curr. 3 CAN frame modifications */
-#define CGW_MOD_ID	0x01
-#define CGW_MOD_DLC	0x02
-#define CGW_MOD_DATA	0x04
-
-#define CGW_FRAME_MODS 3 /* ID DLC DATA */
-
-#define MAX_MODFUNCTIONS (CGW_MOD_FUNCS * CGW_FRAME_MODS)
-
-struct cgw_frame_mod {
-	struct can_frame cf;
-	__u8 modtype;
-} __attribute__((packed));
-
-#define CGW_MODATTR_LEN sizeof(struct cgw_frame_mod)
-
-struct cgw_csum_xor {
-	__s8 from_idx;
-	__s8 to_idx;
-	__s8 result_idx;
-	__u8 init_xor_val;
-} __attribute__((packed));
-
-struct cgw_csum_crc8 {
-	__s8 from_idx;
-	__s8 to_idx;
-	__s8 result_idx;
-	__u8 init_crc_val;
-	__u8 final_xor_val;
-	__u8 crctab[256];
-	__u8 profile;
-	__u8 profile_data[20];
-} __attribute__((packed));
-
-/* length of checksum operation parameters. idx = index in CAN frame data[] */
-#define CGW_CS_XOR_LEN  sizeof(struct cgw_csum_xor)
-#define CGW_CS_CRC8_LEN  sizeof(struct cgw_csum_crc8)
-
-/* CRC8 profiles (compute CRC for additional data elements - see below) */
-enum {
-	CGW_CRC8PRF_UNSPEC,
-	CGW_CRC8PRF_1U8,	/* compute one additional u8 value */
-	CGW_CRC8PRF_16U8,	/* u8 value table indexed by data[1] & 0xF */
-	CGW_CRC8PRF_SFFID_XOR,	/* (can_id & 0xFF) ^ (can_id >> 8 & 0xFF) */
-	__CGW_CRC8PRF_MAX
-};
-
-#define CGW_CRC8PRF_MAX (__CGW_CRC8PRF_MAX - 1)
-
-/*
- * CAN rtnetlink attribute contents in detail
- *
- * CGW_XXX_IF (length 4 bytes):
- * Sets an interface index for source/destination network interfaces.
- * For the CAN->CAN gwtype the indices of _two_ CAN interfaces are mandatory.
- *
- * CGW_FILTER (length 8 bytes):
- * Sets a CAN receive filter for the gateway job specified by the
- * struct can_filter described in include/linux/can.h
- *
- * CGW_MOD_XXX (length 17 bytes):
- * Specifies a modification that's done to a received CAN frame before it is
- * send out to the destination interface.
- *
- * <struct can_frame> data used as operator
- * <u8> affected CAN frame elements
- *
- * CGW_CS_XOR (length 4 bytes):
- * Set a simple XOR checksum starting with an initial value into
- * data[result-idx] using data[start-idx] .. data[end-idx]
- *
- * The XOR checksum is calculated like this:
- *
- * xor = init_xor_val
- *
- * for (i = from_idx .. to_idx)
- *      xor ^= can_frame.data[i]
- *
- * can_frame.data[ result_idx ] = xor
- *
- * CGW_CS_CRC8 (length 282 bytes):
- * Set a CRC8 value into data[result-idx] using a given 256 byte CRC8 table,
- * a given initial value and a defined input data[start-idx] .. data[end-idx].
- * Finally the result value is XOR'ed with the final_xor_val.
- *
- * The CRC8 checksum is calculated like this:
- *
- * crc = init_crc_val
- *
- * for (i = from_idx .. to_idx)
- *      crc = crctab[ crc ^ can_frame.data[i] ]
- *
- * can_frame.data[ result_idx ] = crc ^ final_xor_val
- *
- * The calculated CRC may contain additional source data elements that can be
- * defined in the handling of 'checksum profiles' e.g. shown in AUTOSAR specs
- * like http://www.autosar.org/download/R4.0/AUTOSAR_SWS_E2ELibrary.pdf
- * E.g. the profile_data[] may contain additional u8 values (called DATA_IDs)
- * that are used depending on counter values inside the CAN frame data[].
- * So far only three profiles have been implemented for illustration.
- *
- * Remark: In general the attribute data is a linear buffer.
- *         Beware of sending unpacked or aligned structs!
- */
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/can/netlink.h b/ANDROID_3.4.5/include/linux/can/netlink.h
deleted file mode 100644
index 14966ddb..00000000
--- a/ANDROID_3.4.5/include/linux/can/netlink.h
+++ /dev/null
@@ -1,122 +0,0 @@
-/*
- * linux/can/netlink.h
- *
- * Definitions for the CAN netlink interface
- *
- * Copyright (c) 2009 Wolfgang Grandegger <wg@grandegger.com>
- *
- */
-
-#ifndef CAN_NETLINK_H
-#define CAN_NETLINK_H
-
-#include <linux/types.h>
-
-/*
- * CAN bit-timing parameters
- *
- * For further information, please read chapter "8 BIT TIMING
- * REQUIREMENTS" of the "Bosch CAN Specification version 2.0"
- * at http://www.semiconductors.bosch.de/pdf/can2spec.pdf.
- */
-struct can_bittiming {
-	__u32 bitrate;		/* Bit-rate in bits/second */
-	__u32 sample_point;	/* Sample point in one-tenth of a percent */
-	__u32 tq;		/* Time quanta (TQ) in nanoseconds */
-	__u32 prop_seg;		/* Propagation segment in TQs */
-	__u32 phase_seg1;	/* Phase buffer segment 1 in TQs */
-	__u32 phase_seg2;	/* Phase buffer segment 2 in TQs */
-	__u32 sjw;		/* Synchronisation jump width in TQs */
-	__u32 brp;		/* Bit-rate prescaler */
-};
-
-/*
- * CAN harware-dependent bit-timing constant
- *
- * Used for calculating and checking bit-timing parameters
- */
-struct can_bittiming_const {
-	char name[16];		/* Name of the CAN controller hardware */
-	__u32 tseg1_min;	/* Time segement 1 = prop_seg + phase_seg1 */
-	__u32 tseg1_max;
-	__u32 tseg2_min;	/* Time segement 2 = phase_seg2 */
-	__u32 tseg2_max;
-	__u32 sjw_max;		/* Synchronisation jump width */
-	__u32 brp_min;		/* Bit-rate prescaler */
-	__u32 brp_max;
-	__u32 brp_inc;
-};
-
-/*
- * CAN clock parameters
- */
-struct can_clock {
-	__u32 freq;		/* CAN system clock frequency in Hz */
-};
-
-/*
- * CAN operational and error states
- */
-enum can_state {
-	CAN_STATE_ERROR_ACTIVE = 0,	/* RX/TX error count < 96 */
-	CAN_STATE_ERROR_WARNING,	/* RX/TX error count < 128 */
-	CAN_STATE_ERROR_PASSIVE,	/* RX/TX error count < 256 */
-	CAN_STATE_BUS_OFF,		/* RX/TX error count >= 256 */
-	CAN_STATE_STOPPED,		/* Device is stopped */
-	CAN_STATE_SLEEPING,		/* Device is sleeping */
-	CAN_STATE_MAX
-};
-
-/*
- * CAN bus error counters
- */
-struct can_berr_counter {
-	__u16 txerr;
-	__u16 rxerr;
-};
-
-/*
- * CAN controller mode
- */
-struct can_ctrlmode {
-	__u32 mask;
-	__u32 flags;
-};
-
-#define CAN_CTRLMODE_LOOPBACK		0x01	/* Loopback mode */
-#define CAN_CTRLMODE_LISTENONLY		0x02 	/* Listen-only mode */
-#define CAN_CTRLMODE_3_SAMPLES		0x04	/* Triple sampling mode */
-#define CAN_CTRLMODE_ONE_SHOT		0x08	/* One-Shot mode */
-#define CAN_CTRLMODE_BERR_REPORTING	0x10	/* Bus-error reporting */
-
-/*
- * CAN device statistics
- */
-struct can_device_stats {
-	__u32 bus_error;	/* Bus errors */
-	__u32 error_warning;	/* Changes to error warning state */
-	__u32 error_passive;	/* Changes to error passive state */
-	__u32 bus_off;		/* Changes to bus off state */
-	__u32 arbitration_lost; /* Arbitration lost errors */
-	__u32 restarts;		/* CAN controller re-starts */
-};
-
-/*
- * CAN netlink interface
- */
-enum {
-	IFLA_CAN_UNSPEC,
-	IFLA_CAN_BITTIMING,
-	IFLA_CAN_BITTIMING_CONST,
-	IFLA_CAN_CLOCK,
-	IFLA_CAN_STATE,
-	IFLA_CAN_CTRLMODE,
-	IFLA_CAN_RESTART_MS,
-	IFLA_CAN_RESTART,
-	IFLA_CAN_BERR_COUNTER,
-	__IFLA_CAN_MAX
-};
-
-#define IFLA_CAN_MAX	(__IFLA_CAN_MAX - 1)
-
-#endif /* CAN_NETLINK_H */
diff --git a/ANDROID_3.4.5/include/linux/can/platform/cc770.h b/ANDROID_3.4.5/include/linux/can/platform/cc770.h
deleted file mode 100644
index 7702641f..00000000
--- a/ANDROID_3.4.5/include/linux/can/platform/cc770.h
+++ /dev/null
@@ -1,33 +0,0 @@
-#ifndef _CAN_PLATFORM_CC770_H_
-#define _CAN_PLATFORM_CC770_H_
-
-/* CPU Interface Register (0x02) */
-#define CPUIF_CEN	0x01	/* Clock Out Enable */
-#define CPUIF_MUX	0x04	/* Multiplex */
-#define CPUIF_SLP	0x08	/* Sleep */
-#define CPUIF_PWD	0x10	/* Power Down Mode */
-#define CPUIF_DMC	0x20	/* Divide Memory Clock */
-#define CPUIF_DSC	0x40	/* Divide System Clock */
-#define CPUIF_RST	0x80	/* Hardware Reset Status */
-
-/* Clock Out Register (0x1f) */
-#define CLKOUT_CD_MASK  0x0f	/* Clock Divider mask */
-#define CLKOUT_SL_MASK	0x30	/* Slew Rate mask */
-#define CLKOUT_SL_SHIFT	4
-
-/* Bus Configuration Register (0x2f) */
-#define BUSCFG_DR0	0x01	/* Disconnect RX0 Input / Select RX input */
-#define BUSCFG_DR1	0x02	/* Disconnect RX1 Input / Silent mode */
-#define BUSCFG_DT1	0x08	/* Disconnect TX1 Output */
-#define BUSCFG_POL	0x20	/* Polarity dominant or recessive */
-#define BUSCFG_CBY	0x40	/* Input Comparator Bypass */
-
-struct cc770_platform_data {
-	u32 osc_freq;	/* CAN bus oscillator frequency in Hz */
-
-	u8 cir;		/* CPU Interface Register */
-	u8 cor;		/* Clock Out Register */
-	u8 bcr;		/* Bus Configuration Register */
-};
-
-#endif	/* !_CAN_PLATFORM_CC770_H_ */
diff --git a/ANDROID_3.4.5/include/linux/can/platform/flexcan.h b/ANDROID_3.4.5/include/linux/can/platform/flexcan.h
deleted file mode 100644
index 72b713ab..00000000
--- a/ANDROID_3.4.5/include/linux/can/platform/flexcan.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * Copyright (C) 2010 Marc Kleine-Budde <kernel@pengutronix.de>
- *
- * This file is released under the GPLv2
- *
- */
-
-#ifndef __CAN_PLATFORM_FLEXCAN_H
-#define __CAN_PLATFORM_FLEXCAN_H
-
-/**
- * struct flexcan_platform_data - flex CAN controller platform data
- * @transceiver_enable:         - called to power on/off the transceiver
- *
- */
-struct flexcan_platform_data {
-	void (*transceiver_switch)(int enable);
-};
-
-#endif /* __CAN_PLATFORM_FLEXCAN_H */
diff --git a/ANDROID_3.4.5/include/linux/can/platform/mcp251x.h b/ANDROID_3.4.5/include/linux/can/platform/mcp251x.h
deleted file mode 100644
index 089fe432..00000000
--- a/ANDROID_3.4.5/include/linux/can/platform/mcp251x.h
+++ /dev/null
@@ -1,34 +0,0 @@
-#ifndef __CAN_PLATFORM_MCP251X_H__
-#define __CAN_PLATFORM_MCP251X_H__
-
-/*
- *
- * CAN bus driver for Microchip 251x CAN Controller with SPI Interface
- *
- */
-
-#include <linux/spi/spi.h>
-
-/**
- * struct mcp251x_platform_data - MCP251X SPI CAN controller platform data
- * @oscillator_frequency:       - oscillator frequency in Hz
- * @irq_flags:                  - IRQF configuration flags
- * @board_specific_setup:       - called before probing the chip (power,reset)
- * @transceiver_enable:         - called to power on/off the transceiver
- * @power_enable:               - called to power on/off the mcp *and* the
- *                                transceiver
- *
- * Please note that you should define power_enable or transceiver_enable or
- * none of them. Defining both of them is no use.
- *
- */
-
-struct mcp251x_platform_data {
-	unsigned long oscillator_frequency;
-	unsigned long irq_flags;
-	int (*board_specific_setup)(struct spi_device *spi);
-	int (*transceiver_enable)(int enable);
-	int (*power_enable) (int enable);
-};
-
-#endif /* __CAN_PLATFORM_MCP251X_H__ */
diff --git a/ANDROID_3.4.5/include/linux/can/platform/sja1000.h b/ANDROID_3.4.5/include/linux/can/platform/sja1000.h
deleted file mode 100644
index 96f8fcc7..00000000
--- a/ANDROID_3.4.5/include/linux/can/platform/sja1000.h
+++ /dev/null
@@ -1,35 +0,0 @@
-#ifndef _CAN_PLATFORM_SJA1000_H_
-#define _CAN_PLATFORM_SJA1000_H_
-
-/* clock divider register */
-#define CDR_CLKOUT_MASK 0x07
-#define CDR_CLK_OFF	0x08 /* Clock off (CLKOUT pin) */
-#define CDR_RXINPEN	0x20 /* TX1 output is RX irq output */
-#define CDR_CBP		0x40 /* CAN input comparator bypass */
-#define CDR_PELICAN	0x80 /* PeliCAN mode */
-
-/* output control register */
-#define OCR_MODE_BIPHASE  0x00
-#define OCR_MODE_TEST     0x01
-#define OCR_MODE_NORMAL   0x02
-#define OCR_MODE_CLOCK    0x03
-#define OCR_MODE_MASK     0x07
-#define OCR_TX0_INVERT    0x04
-#define OCR_TX0_PULLDOWN  0x08
-#define OCR_TX0_PULLUP    0x10
-#define OCR_TX0_PUSHPULL  0x18
-#define OCR_TX1_INVERT    0x20
-#define OCR_TX1_PULLDOWN  0x40
-#define OCR_TX1_PULLUP    0x80
-#define OCR_TX1_PUSHPULL  0xc0
-#define OCR_TX_MASK       0xfc
-#define OCR_TX_SHIFT      2
-
-struct sja1000_platform_data {
-	u32 osc_freq;	/* CAN bus oscillator frequency in Hz */
-
-	u8 ocr;		/* output control register */
-	u8 cdr;		/* clock divider register */
-};
-
-#endif	/* !_CAN_PLATFORM_SJA1000_H_ */
diff --git a/ANDROID_3.4.5/include/linux/can/platform/ti_hecc.h b/ANDROID_3.4.5/include/linux/can/platform/ti_hecc.h
deleted file mode 100644
index af17cb3f..00000000
--- a/ANDROID_3.4.5/include/linux/can/platform/ti_hecc.h
+++ /dev/null
@@ -1,44 +0,0 @@
-#ifndef __CAN_PLATFORM_TI_HECC_H__
-#define __CAN_PLATFORM_TI_HECC_H__
-
-/*
- * TI HECC (High End CAN Controller) driver platform header
- *
- * Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed as is WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-/**
- * struct hecc_platform_data - HECC Platform Data
- *
- * @scc_hecc_offset:	mostly 0 - should really never change
- * @scc_ram_offset:	SCC RAM offset
- * @hecc_ram_offset:	HECC RAM offset
- * @mbx_offset:		Mailbox RAM offset
- * @int_line:		Interrupt line to use - 0 or 1
- * @version:		version for future use
- * @transceiver_switch:	platform specific callback fn for transceiver control
- *
- * Platform data structure to get all platform specific settings.
- * this structure also accounts the fact that the IP may have different
- * RAM and mailbox offsets for different SOC's
- */
-struct ti_hecc_platform_data {
-	u32 scc_hecc_offset;
-	u32 scc_ram_offset;
-	u32 hecc_ram_offset;
-	u32 mbx_offset;
-	u32 int_line;
-	u32 version;
-	void (*transceiver_switch) (int);
-};
-#endif
diff --git a/ANDROID_3.4.5/include/linux/can/raw.h b/ANDROID_3.4.5/include/linux/can/raw.h
deleted file mode 100644
index 781f3a37..00000000
--- a/ANDROID_3.4.5/include/linux/can/raw.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * linux/can/raw.h
- *
- * Definitions for raw CAN sockets
- *
- * Authors: Oliver Hartkopp <oliver.hartkopp@volkswagen.de>
- *          Urs Thuermann   <urs.thuermann@volkswagen.de>
- * Copyright (c) 2002-2007 Volkswagen Group Electronic Research
- * All rights reserved.
- *
- */
-
-#ifndef CAN_RAW_H
-#define CAN_RAW_H
-
-#include <linux/can.h>
-
-#define SOL_CAN_RAW (SOL_CAN_BASE + CAN_RAW)
-
-/* for socket options affecting the socket (not the global system) */
-
-enum {
-	CAN_RAW_FILTER = 1,	/* set 0 .. n can_filter(s)          */
-	CAN_RAW_ERR_FILTER,	/* set filter for error frames       */
-	CAN_RAW_LOOPBACK,	/* local loopback (default:on)       */
-	CAN_RAW_RECV_OWN_MSGS	/* receive my own msgs (default:off) */
-};
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/capability.h b/ANDROID_3.4.5/include/linux/capability.h
deleted file mode 100644
index c398cff3..00000000
--- a/ANDROID_3.4.5/include/linux/capability.h
+++ /dev/null
@@ -1,560 +0,0 @@
-/*
- * This is <linux/capability.h>
- *
- * Andrew G. Morgan <morgan@kernel.org>
- * Alexander Kjeldaas <astor@guardian.no>
- * with help from Aleph1, Roland Buresund and Andrew Main.
- *
- * See here for the libcap library ("POSIX draft" compliance):
- *
- * ftp://www.kernel.org/pub/linux/libs/security/linux-privs/kernel-2.6/
- */
-
-#ifndef _LINUX_CAPABILITY_H
-#define _LINUX_CAPABILITY_H
-
-#include <linux/types.h>
-
-struct task_struct;
-
-/* User-level do most of the mapping between kernel and user
-   capabilities based on the version tag given by the kernel. The
-   kernel might be somewhat backwards compatible, but don't bet on
-   it. */
-
-/* Note, cap_t, is defined by POSIX (draft) to be an "opaque" pointer to
-   a set of three capability sets.  The transposition of 3*the
-   following structure to such a composite is better handled in a user
-   library since the draft standard requires the use of malloc/free
-   etc.. */
-
-#define _LINUX_CAPABILITY_VERSION_1  0x19980330
-#define _LINUX_CAPABILITY_U32S_1     1
-
-#define _LINUX_CAPABILITY_VERSION_2  0x20071026  /* deprecated - use v3 */
-#define _LINUX_CAPABILITY_U32S_2     2
-
-#define _LINUX_CAPABILITY_VERSION_3  0x20080522
-#define _LINUX_CAPABILITY_U32S_3     2
-
-typedef struct __user_cap_header_struct {
-	__u32 version;
-	int pid;
-} __user *cap_user_header_t;
-
-typedef struct __user_cap_data_struct {
-        __u32 effective;
-        __u32 permitted;
-        __u32 inheritable;
-} __user *cap_user_data_t;
-
-
-#define VFS_CAP_REVISION_MASK	0xFF000000
-#define VFS_CAP_REVISION_SHIFT	24
-#define VFS_CAP_FLAGS_MASK	~VFS_CAP_REVISION_MASK
-#define VFS_CAP_FLAGS_EFFECTIVE	0x000001
-
-#define VFS_CAP_REVISION_1	0x01000000
-#define VFS_CAP_U32_1           1
-#define XATTR_CAPS_SZ_1         (sizeof(__le32)*(1 + 2*VFS_CAP_U32_1))
-
-#define VFS_CAP_REVISION_2	0x02000000
-#define VFS_CAP_U32_2           2
-#define XATTR_CAPS_SZ_2         (sizeof(__le32)*(1 + 2*VFS_CAP_U32_2))
-
-#define XATTR_CAPS_SZ           XATTR_CAPS_SZ_2
-#define VFS_CAP_U32             VFS_CAP_U32_2
-#define VFS_CAP_REVISION	VFS_CAP_REVISION_2
-
-struct vfs_cap_data {
-	__le32 magic_etc;            /* Little endian */
-	struct {
-		__le32 permitted;    /* Little endian */
-		__le32 inheritable;  /* Little endian */
-	} data[VFS_CAP_U32];
-};
-
-#ifndef __KERNEL__
-
-/*
- * Backwardly compatible definition for source code - trapped in a
- * 32-bit world. If you find you need this, please consider using
- * libcap to untrap yourself...
- */
-#define _LINUX_CAPABILITY_VERSION  _LINUX_CAPABILITY_VERSION_1
-#define _LINUX_CAPABILITY_U32S     _LINUX_CAPABILITY_U32S_1
-
-#else
-
-#define _KERNEL_CAPABILITY_VERSION _LINUX_CAPABILITY_VERSION_3
-#define _KERNEL_CAPABILITY_U32S    _LINUX_CAPABILITY_U32S_3
-
-extern int file_caps_enabled;
-
-typedef struct kernel_cap_struct {
-	__u32 cap[_KERNEL_CAPABILITY_U32S];
-} kernel_cap_t;
-
-/* exact same as vfs_cap_data but in cpu endian and always filled completely */
-struct cpu_vfs_cap_data {
-	__u32 magic_etc;
-	kernel_cap_t permitted;
-	kernel_cap_t inheritable;
-};
-
-#define _USER_CAP_HEADER_SIZE  (sizeof(struct __user_cap_header_struct))
-#define _KERNEL_CAP_T_SIZE     (sizeof(kernel_cap_t))
-
-#endif
-
-
-/**
- ** POSIX-draft defined capabilities.
- **/
-
-/* In a system with the [_POSIX_CHOWN_RESTRICTED] option defined, this
-   overrides the restriction of changing file ownership and group
-   ownership. */
-
-#define CAP_CHOWN            0
-
-/* Override all DAC access, including ACL execute access if
-   [_POSIX_ACL] is defined. Excluding DAC access covered by
-   CAP_LINUX_IMMUTABLE. */
-
-#define CAP_DAC_OVERRIDE     1
-
-/* Overrides all DAC restrictions regarding read and search on files
-   and directories, including ACL restrictions if [_POSIX_ACL] is
-   defined. Excluding DAC access covered by CAP_LINUX_IMMUTABLE. */
-
-#define CAP_DAC_READ_SEARCH  2
-
-/* Overrides all restrictions about allowed operations on files, where
-   file owner ID must be equal to the user ID, except where CAP_FSETID
-   is applicable. It doesn't override MAC and DAC restrictions. */
-
-#define CAP_FOWNER           3
-
-/* Overrides the following restrictions that the effective user ID
-   shall match the file owner ID when setting the S_ISUID and S_ISGID
-   bits on that file; that the effective group ID (or one of the
-   supplementary group IDs) shall match the file owner ID when setting
-   the S_ISGID bit on that file; that the S_ISUID and S_ISGID bits are
-   cleared on successful return from chown(2) (not implemented). */
-
-#define CAP_FSETID           4
-
-/* Overrides the restriction that the real or effective user ID of a
-   process sending a signal must match the real or effective user ID
-   of the process receiving the signal. */
-
-#define CAP_KILL             5
-
-/* Allows setgid(2) manipulation */
-/* Allows setgroups(2) */
-/* Allows forged gids on socket credentials passing. */
-
-#define CAP_SETGID           6
-
-/* Allows set*uid(2) manipulation (including fsuid). */
-/* Allows forged pids on socket credentials passing. */
-
-#define CAP_SETUID           7
-
-
-/**
- ** Linux-specific capabilities
- **/
-
-/* Without VFS support for capabilities:
- *   Transfer any capability in your permitted set to any pid,
- *   remove any capability in your permitted set from any pid
- * With VFS support for capabilities (neither of above, but)
- *   Add any capability from current's capability bounding set
- *       to the current process' inheritable set
- *   Allow taking bits out of capability bounding set
- *   Allow modification of the securebits for a process
- */
-
-#define CAP_SETPCAP          8
-
-/* Allow modification of S_IMMUTABLE and S_APPEND file attributes */
-
-#define CAP_LINUX_IMMUTABLE  9
-
-/* Allows binding to TCP/UDP sockets below 1024 */
-/* Allows binding to ATM VCIs below 32 */
-
-#define CAP_NET_BIND_SERVICE 10
-
-/* Allow broadcasting, listen to multicast */
-
-#define CAP_NET_BROADCAST    11
-
-/* Allow interface configuration */
-/* Allow administration of IP firewall, masquerading and accounting */
-/* Allow setting debug option on sockets */
-/* Allow modification of routing tables */
-/* Allow setting arbitrary process / process group ownership on
-   sockets */
-/* Allow binding to any address for transparent proxying (also via NET_RAW) */
-/* Allow setting TOS (type of service) */
-/* Allow setting promiscuous mode */
-/* Allow clearing driver statistics */
-/* Allow multicasting */
-/* Allow read/write of device-specific registers */
-/* Allow activation of ATM control sockets */
-
-#define CAP_NET_ADMIN        12
-
-/* Allow use of RAW sockets */
-/* Allow use of PACKET sockets */
-/* Allow binding to any address for transparent proxying (also via NET_ADMIN) */
-
-#define CAP_NET_RAW          13
-
-/* Allow locking of shared memory segments */
-/* Allow mlock and mlockall (which doesn't really have anything to do
-   with IPC) */
-
-#define CAP_IPC_LOCK         14
-
-/* Override IPC ownership checks */
-
-#define CAP_IPC_OWNER        15
-
-/* Insert and remove kernel modules - modify kernel without limit */
-#define CAP_SYS_MODULE       16
-
-/* Allow ioperm/iopl access */
-/* Allow sending USB messages to any device via /proc/bus/usb */
-
-#define CAP_SYS_RAWIO        17
-
-/* Allow use of chroot() */
-
-#define CAP_SYS_CHROOT       18
-
-/* Allow ptrace() of any process */
-
-#define CAP_SYS_PTRACE       19
-
-/* Allow configuration of process accounting */
-
-#define CAP_SYS_PACCT        20
-
-/* Allow configuration of the secure attention key */
-/* Allow administration of the random device */
-/* Allow examination and configuration of disk quotas */
-/* Allow setting the domainname */
-/* Allow setting the hostname */
-/* Allow calling bdflush() */
-/* Allow mount() and umount(), setting up new smb connection */
-/* Allow some autofs root ioctls */
-/* Allow nfsservctl */
-/* Allow VM86_REQUEST_IRQ */
-/* Allow to read/write pci config on alpha */
-/* Allow irix_prctl on mips (setstacksize) */
-/* Allow flushing all cache on m68k (sys_cacheflush) */
-/* Allow removing semaphores */
-/* Used instead of CAP_CHOWN to "chown" IPC message queues, semaphores
-   and shared memory */
-/* Allow locking/unlocking of shared memory segment */
-/* Allow turning swap on/off */
-/* Allow forged pids on socket credentials passing */
-/* Allow setting readahead and flushing buffers on block devices */
-/* Allow setting geometry in floppy driver */
-/* Allow turning DMA on/off in xd driver */
-/* Allow administration of md devices (mostly the above, but some
-   extra ioctls) */
-/* Allow tuning the ide driver */
-/* Allow access to the nvram device */
-/* Allow administration of apm_bios, serial and bttv (TV) device */
-/* Allow manufacturer commands in isdn CAPI support driver */
-/* Allow reading non-standardized portions of pci configuration space */
-/* Allow DDI debug ioctl on sbpcd driver */
-/* Allow setting up serial ports */
-/* Allow sending raw qic-117 commands */
-/* Allow enabling/disabling tagged queuing on SCSI controllers and sending
-   arbitrary SCSI commands */
-/* Allow setting encryption key on loopback filesystem */
-/* Allow setting zone reclaim policy */
-
-#define CAP_SYS_ADMIN        21
-
-/* Allow use of reboot() */
-
-#define CAP_SYS_BOOT         22
-
-/* Allow raising priority and setting priority on other (different
-   UID) processes */
-/* Allow use of FIFO and round-robin (realtime) scheduling on own
-   processes and setting the scheduling algorithm used by another
-   process. */
-/* Allow setting cpu affinity on other processes */
-
-#define CAP_SYS_NICE         23
-
-/* Override resource limits. Set resource limits. */
-/* Override quota limits. */
-/* Override reserved space on ext2 filesystem */
-/* Modify data journaling mode on ext3 filesystem (uses journaling
-   resources) */
-/* NOTE: ext2 honors fsuid when checking for resource overrides, so
-   you can override using fsuid too */
-/* Override size restrictions on IPC message queues */
-/* Allow more than 64hz interrupts from the real-time clock */
-/* Override max number of consoles on console allocation */
-/* Override max number of keymaps */
-
-#define CAP_SYS_RESOURCE     24
-
-/* Allow manipulation of system clock */
-/* Allow irix_stime on mips */
-/* Allow setting the real-time clock */
-
-#define CAP_SYS_TIME         25
-
-/* Allow configuration of tty devices */
-/* Allow vhangup() of tty */
-
-#define CAP_SYS_TTY_CONFIG   26
-
-/* Allow the privileged aspects of mknod() */
-
-#define CAP_MKNOD            27
-
-/* Allow taking of leases on files */
-
-#define CAP_LEASE            28
-
-#define CAP_AUDIT_WRITE      29
-
-#define CAP_AUDIT_CONTROL    30
-
-#define CAP_SETFCAP	     31
-
-/* Override MAC access.
-   The base kernel enforces no MAC policy.
-   An LSM may enforce a MAC policy, and if it does and it chooses
-   to implement capability based overrides of that policy, this is
-   the capability it should use to do so. */
-
-#define CAP_MAC_OVERRIDE     32
-
-/* Allow MAC configuration or state changes.
-   The base kernel requires no MAC configuration.
-   An LSM may enforce a MAC policy, and if it does and it chooses
-   to implement capability based checks on modifications to that
-   policy or the data required to maintain it, this is the
-   capability it should use to do so. */
-
-#define CAP_MAC_ADMIN        33
-
-/* Allow configuring the kernel's syslog (printk behaviour) */
-
-#define CAP_SYSLOG           34
-
-/* Allow triggering something that will wake the system */
-
-#define CAP_WAKE_ALARM            35
-
-/* Allow preventing system suspends while epoll events are pending */
-
-#define CAP_EPOLLWAKEUP      36
-
-#define CAP_LAST_CAP         CAP_EPOLLWAKEUP
-
-#define cap_valid(x) ((x) >= 0 && (x) <= CAP_LAST_CAP)
-
-/*
- * Bit location of each capability (used by user-space library and kernel)
- */
-
-#define CAP_TO_INDEX(x)     ((x) >> 5)        /* 1 << 5 == bits in __u32 */
-#define CAP_TO_MASK(x)      (1 << ((x) & 31)) /* mask for indexed __u32 */
-
-#ifdef __KERNEL__
-
-struct dentry;
-struct user_namespace;
-
-struct user_namespace *current_user_ns(void);
-
-extern const kernel_cap_t __cap_empty_set;
-extern const kernel_cap_t __cap_init_eff_set;
-
-/*
- * Internal kernel functions only
- */
-
-#define CAP_FOR_EACH_U32(__capi)  \
-	for (__capi = 0; __capi < _KERNEL_CAPABILITY_U32S; ++__capi)
-
-/*
- * CAP_FS_MASK and CAP_NFSD_MASKS:
- *
- * The fs mask is all the privileges that fsuid==0 historically meant.
- * At one time in the past, that included CAP_MKNOD and CAP_LINUX_IMMUTABLE.
- *
- * It has never meant setting security.* and trusted.* xattrs.
- *
- * We could also define fsmask as follows:
- *   1. CAP_FS_MASK is the privilege to bypass all fs-related DAC permissions
- *   2. The security.* and trusted.* xattrs are fs-related MAC permissions
- */
-
-# define CAP_FS_MASK_B0     (CAP_TO_MASK(CAP_CHOWN)		\
-			    | CAP_TO_MASK(CAP_MKNOD)		\
-			    | CAP_TO_MASK(CAP_DAC_OVERRIDE)	\
-			    | CAP_TO_MASK(CAP_DAC_READ_SEARCH)	\
-			    | CAP_TO_MASK(CAP_FOWNER)		\
-			    | CAP_TO_MASK(CAP_FSETID))
-
-# define CAP_FS_MASK_B1     (CAP_TO_MASK(CAP_MAC_OVERRIDE))
-
-#if _KERNEL_CAPABILITY_U32S != 2
-# error Fix up hand-coded capability macro initializers
-#else /* HAND-CODED capability initializers */
-
-# define CAP_EMPTY_SET    ((kernel_cap_t){{ 0, 0 }})
-# define CAP_FULL_SET     ((kernel_cap_t){{ ~0, ~0 }})
-# define CAP_FS_SET       ((kernel_cap_t){{ CAP_FS_MASK_B0 \
-				    | CAP_TO_MASK(CAP_LINUX_IMMUTABLE), \
-				    CAP_FS_MASK_B1 } })
-# define CAP_NFSD_SET     ((kernel_cap_t){{ CAP_FS_MASK_B0 \
-				    | CAP_TO_MASK(CAP_SYS_RESOURCE), \
-				    CAP_FS_MASK_B1 } })
-
-#endif /* _KERNEL_CAPABILITY_U32S != 2 */
-
-# define cap_clear(c)         do { (c) = __cap_empty_set; } while (0)
-
-#define cap_raise(c, flag)  ((c).cap[CAP_TO_INDEX(flag)] |= CAP_TO_MASK(flag))
-#define cap_lower(c, flag)  ((c).cap[CAP_TO_INDEX(flag)] &= ~CAP_TO_MASK(flag))
-#define cap_raised(c, flag) ((c).cap[CAP_TO_INDEX(flag)] & CAP_TO_MASK(flag))
-
-#define CAP_BOP_ALL(c, a, b, OP)                                    \
-do {                                                                \
-	unsigned __capi;                                            \
-	CAP_FOR_EACH_U32(__capi) {                                  \
-		c.cap[__capi] = a.cap[__capi] OP b.cap[__capi];     \
-	}                                                           \
-} while (0)
-
-#define CAP_UOP_ALL(c, a, OP)                                       \
-do {                                                                \
-	unsigned __capi;                                            \
-	CAP_FOR_EACH_U32(__capi) {                                  \
-		c.cap[__capi] = OP a.cap[__capi];                   \
-	}                                                           \
-} while (0)
-
-static inline kernel_cap_t cap_combine(const kernel_cap_t a,
-				       const kernel_cap_t b)
-{
-	kernel_cap_t dest;
-	CAP_BOP_ALL(dest, a, b, |);
-	return dest;
-}
-
-static inline kernel_cap_t cap_intersect(const kernel_cap_t a,
-					 const kernel_cap_t b)
-{
-	kernel_cap_t dest;
-	CAP_BOP_ALL(dest, a, b, &);
-	return dest;
-}
-
-static inline kernel_cap_t cap_drop(const kernel_cap_t a,
-				    const kernel_cap_t drop)
-{
-	kernel_cap_t dest;
-	CAP_BOP_ALL(dest, a, drop, &~);
-	return dest;
-}
-
-static inline kernel_cap_t cap_invert(const kernel_cap_t c)
-{
-	kernel_cap_t dest;
-	CAP_UOP_ALL(dest, c, ~);
-	return dest;
-}
-
-static inline int cap_isclear(const kernel_cap_t a)
-{
-	unsigned __capi;
-	CAP_FOR_EACH_U32(__capi) {
-		if (a.cap[__capi] != 0)
-			return 0;
-	}
-	return 1;
-}
-
-/*
- * Check if "a" is a subset of "set".
- * return 1 if ALL of the capabilities in "a" are also in "set"
- *	cap_issubset(0101, 1111) will return 1
- * return 0 if ANY of the capabilities in "a" are not in "set"
- *	cap_issubset(1111, 0101) will return 0
- */
-static inline int cap_issubset(const kernel_cap_t a, const kernel_cap_t set)
-{
-	kernel_cap_t dest;
-	dest = cap_drop(a, set);
-	return cap_isclear(dest);
-}
-
-/* Used to decide between falling back on the old suser() or fsuser(). */
-
-static inline int cap_is_fs_cap(int cap)
-{
-	const kernel_cap_t __cap_fs_set = CAP_FS_SET;
-	return !!(CAP_TO_MASK(cap) & __cap_fs_set.cap[CAP_TO_INDEX(cap)]);
-}
-
-static inline kernel_cap_t cap_drop_fs_set(const kernel_cap_t a)
-{
-	const kernel_cap_t __cap_fs_set = CAP_FS_SET;
-	return cap_drop(a, __cap_fs_set);
-}
-
-static inline kernel_cap_t cap_raise_fs_set(const kernel_cap_t a,
-					    const kernel_cap_t permitted)
-{
-	const kernel_cap_t __cap_fs_set = CAP_FS_SET;
-	return cap_combine(a,
-			   cap_intersect(permitted, __cap_fs_set));
-}
-
-static inline kernel_cap_t cap_drop_nfsd_set(const kernel_cap_t a)
-{
-	const kernel_cap_t __cap_fs_set = CAP_NFSD_SET;
-	return cap_drop(a, __cap_fs_set);
-}
-
-static inline kernel_cap_t cap_raise_nfsd_set(const kernel_cap_t a,
-					      const kernel_cap_t permitted)
-{
-	const kernel_cap_t __cap_nfsd_set = CAP_NFSD_SET;
-	return cap_combine(a,
-			   cap_intersect(permitted, __cap_nfsd_set));
-}
-
-extern bool has_capability(struct task_struct *t, int cap);
-extern bool has_ns_capability(struct task_struct *t,
-			      struct user_namespace *ns, int cap);
-extern bool has_capability_noaudit(struct task_struct *t, int cap);
-extern bool has_ns_capability_noaudit(struct task_struct *t,
-				      struct user_namespace *ns, int cap);
-extern bool capable(int cap);
-extern bool ns_capable(struct user_namespace *ns, int cap);
-extern bool nsown_capable(int cap);
-
-/* audit system wants to get cap info from files as well */
-extern int get_vfs_caps_from_disk(const struct dentry *dentry, struct cpu_vfs_cap_data *cpu_caps);
-
-#endif /* __KERNEL__ */
-
-#endif /* !_LINUX_CAPABILITY_H */
diff --git a/ANDROID_3.4.5/include/linux/capi.h b/ANDROID_3.4.5/include/linux/capi.h
deleted file mode 100644
index 65100d6c..00000000
--- a/ANDROID_3.4.5/include/linux/capi.h
+++ /dev/null
@@ -1,133 +0,0 @@
-/* $Id: capi.h,v 1.4.6.1 2001/09/23 22:25:05 kai Exp $
- * 
- * CAPI 2.0 Interface for Linux
- * 
- * Copyright 1997 by Carsten Paeth (calle@calle.in-berlin.de)
- * 
- * This software may be used and distributed according to the terms
- * of the GNU General Public License, incorporated herein by reference.
- *
- */
-
-#ifndef __LINUX_CAPI_H__
-#define __LINUX_CAPI_H__
-
-#include <linux/types.h>
-#include <linux/ioctl.h>
-#ifndef __KERNEL__
-#include <linux/kernelcapi.h>
-#endif
-
-/*
- * CAPI_REGISTER
- */
-
-typedef struct capi_register_params {	/* CAPI_REGISTER */
-	__u32 level3cnt;	/* No. of simulatneous user data connections */
-	__u32 datablkcnt;	/* No. of buffered data messages */
-	__u32 datablklen;	/* Size of buffered data messages */
-} capi_register_params;
-
-#define	CAPI_REGISTER	_IOW('C',0x01,struct capi_register_params)
-
-/*
- * CAPI_GET_MANUFACTURER
- */
-
-#define CAPI_MANUFACTURER_LEN		64
-
-#define	CAPI_GET_MANUFACTURER	_IOWR('C',0x06,int)	/* broken: wanted size 64 (CAPI_MANUFACTURER_LEN) */
-
-/*
- * CAPI_GET_VERSION
- */
-
-typedef struct capi_version {
-	__u32 majorversion;
-	__u32 minorversion;
-	__u32 majormanuversion;
-	__u32 minormanuversion;
-} capi_version;
-
-#define CAPI_GET_VERSION	_IOWR('C',0x07,struct capi_version)
-
-/*
- * CAPI_GET_SERIAL
- */
-
-#define CAPI_SERIAL_LEN		8
-#define CAPI_GET_SERIAL		_IOWR('C',0x08,int)	/* broken: wanted size 8 (CAPI_SERIAL_LEN) */
-
-/*
- * CAPI_GET_PROFILE
- */
-
-typedef struct capi_profile {
-	__u16 ncontroller;	/* number of installed controller */
-	__u16 nbchannel;	/* number of B-Channels */
-	__u32 goptions;		/* global options */
-	__u32 support1;		/* B1 protocols support */
-	__u32 support2;		/* B2 protocols support */
-	__u32 support3;		/* B3 protocols support */
-	__u32 reserved[6];	/* reserved */
-	__u32 manu[5];		/* manufacturer specific information */
-} capi_profile;
-
-#define CAPI_GET_PROFILE	_IOWR('C',0x09,struct capi_profile)
-
-typedef struct capi_manufacturer_cmd {
-	unsigned long cmd;
-	void __user *data;
-} capi_manufacturer_cmd;
-
-/*
- * CAPI_MANUFACTURER_CMD
- */
-
-#define CAPI_MANUFACTURER_CMD	_IOWR('C',0x20, struct capi_manufacturer_cmd)
-
-/*
- * CAPI_GET_ERRCODE
- * capi errcode is set, * if read, write, or ioctl returns EIO,
- * ioctl returns errcode directly, and in arg, if != 0
- */
-
-#define CAPI_GET_ERRCODE	_IOR('C',0x21, __u16)
-
-/*
- * CAPI_INSTALLED
- */
-#define CAPI_INSTALLED		_IOR('C',0x22, __u16)
-
-
-/*
- * member contr is input for
- * CAPI_GET_MANUFACTURER, CAPI_VERSION, CAPI_GET_SERIAL
- * and CAPI_GET_PROFILE
- */
-typedef union capi_ioctl_struct {
-	__u32 contr;
-	capi_register_params rparams;
-	__u8 manufacturer[CAPI_MANUFACTURER_LEN];
-	capi_version version;
-	__u8 serial[CAPI_SERIAL_LEN];
-	capi_profile profile;
-	capi_manufacturer_cmd cmd;
-	__u16 errcode;
-} capi_ioctl_struct;
-
-/*
- * Middleware extension
- */
-
-#define CAPIFLAG_HIGHJACKING	0x0001
-
-#define CAPI_GET_FLAGS		_IOR('C',0x23, unsigned)
-#define CAPI_SET_FLAGS		_IOR('C',0x24, unsigned)
-#define CAPI_CLR_FLAGS		_IOR('C',0x25, unsigned)
-
-#define CAPI_NCCI_OPENCOUNT	_IOR('C',0x26, unsigned)
-
-#define CAPI_NCCI_GETUNIT	_IOR('C',0x27, unsigned)
-
-#endif				/* __LINUX_CAPI_H__ */
diff --git a/ANDROID_3.4.5/include/linux/cb710.h b/ANDROID_3.4.5/include/linux/cb710.h
deleted file mode 100644
index 8cc10411..00000000
--- a/ANDROID_3.4.5/include/linux/cb710.h
+++ /dev/null
@@ -1,208 +0,0 @@
-/*
- *  cb710/cb710.h
- *
- *  Copyright by Michał Mirosław, 2008-2009
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef LINUX_CB710_DRIVER_H
-#define LINUX_CB710_DRIVER_H
-
-#include <linux/io.h>
-#include <linux/interrupt.h>
-#include <linux/spinlock.h>
-#include <linux/pci.h>
-#include <linux/platform_device.h>
-#include <linux/mmc/host.h>
-
-struct cb710_slot;
-
-typedef int (*cb710_irq_handler_t)(struct cb710_slot *);
-
-/* per-virtual-slot structure */
-struct cb710_slot {
-	struct platform_device	pdev;
-	void __iomem		*iobase;
-	cb710_irq_handler_t	irq_handler;
-};
-
-/* per-device structure */
-struct cb710_chip {
-	struct pci_dev		*pdev;
-	void __iomem		*iobase;
-	unsigned		platform_id;
-#ifdef CONFIG_CB710_DEBUG_ASSUMPTIONS
-	atomic_t		slot_refs_count;
-#endif
-	unsigned		slot_mask;
-	unsigned		slots;
-	spinlock_t		irq_lock;
-	struct cb710_slot	slot[0];
-};
-
-/* NOTE: cb710_chip.slots is modified only during device init/exit and
- * they are all serialized wrt themselves */
-
-/* cb710_chip.slot_mask values */
-#define CB710_SLOT_MMC		1
-#define CB710_SLOT_MS		2
-#define CB710_SLOT_SM		4
-
-/* slot port accessors - so the logic is more clear in the code */
-#define CB710_PORT_ACCESSORS(t) \
-static inline void cb710_write_port_##t(struct cb710_slot *slot,	\
-	unsigned port, u##t value)					\
-{									\
-	iowrite##t(value, slot->iobase + port);				\
-}									\
-									\
-static inline u##t cb710_read_port_##t(struct cb710_slot *slot,		\
-	unsigned port)							\
-{									\
-	return ioread##t(slot->iobase + port);				\
-}									\
-									\
-static inline void cb710_modify_port_##t(struct cb710_slot *slot,	\
-	unsigned port, u##t set, u##t clear)				\
-{									\
-	iowrite##t(							\
-		(ioread##t(slot->iobase + port) & ~clear)|set,		\
-		slot->iobase + port);					\
-}
-
-CB710_PORT_ACCESSORS(8)
-CB710_PORT_ACCESSORS(16)
-CB710_PORT_ACCESSORS(32)
-
-void cb710_pci_update_config_reg(struct pci_dev *pdev,
-	int reg, uint32_t and, uint32_t xor);
-void cb710_set_irq_handler(struct cb710_slot *slot,
-	cb710_irq_handler_t handler);
-
-/* some device struct walking */
-
-static inline struct cb710_slot *cb710_pdev_to_slot(
-	struct platform_device *pdev)
-{
-	return container_of(pdev, struct cb710_slot, pdev);
-}
-
-static inline struct cb710_chip *cb710_slot_to_chip(struct cb710_slot *slot)
-{
-	return dev_get_drvdata(slot->pdev.dev.parent);
-}
-
-static inline struct device *cb710_slot_dev(struct cb710_slot *slot)
-{
-	return &slot->pdev.dev;
-}
-
-static inline struct device *cb710_chip_dev(struct cb710_chip *chip)
-{
-	return &chip->pdev->dev;
-}
-
-/* debugging aids */
-
-#ifdef CONFIG_CB710_DEBUG
-void cb710_dump_regs(struct cb710_chip *chip, unsigned dump);
-#else
-#define cb710_dump_regs(c, d) do {} while (0)
-#endif
-
-#define CB710_DUMP_REGS_MMC	0x0F
-#define CB710_DUMP_REGS_MS	0x30
-#define CB710_DUMP_REGS_SM	0xC0
-#define CB710_DUMP_REGS_ALL	0xFF
-#define CB710_DUMP_REGS_MASK	0xFF
-
-#define CB710_DUMP_ACCESS_8	0x100
-#define CB710_DUMP_ACCESS_16	0x200
-#define CB710_DUMP_ACCESS_32	0x400
-#define CB710_DUMP_ACCESS_ALL	0x700
-#define CB710_DUMP_ACCESS_MASK	0x700
-
-#endif /* LINUX_CB710_DRIVER_H */
-/*
- *  cb710/sgbuf2.h
- *
- *  Copyright by Michał Mirosław, 2008-2009
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef LINUX_CB710_SG_H
-#define LINUX_CB710_SG_H
-
-#include <linux/highmem.h>
-#include <linux/scatterlist.h>
-
-/*
- * 32-bit PIO mapping sg iterator
- *
- * Hides scatterlist access issues - fragment boundaries, alignment, page
- * mapping - for drivers using 32-bit-word-at-a-time-PIO (ie. PCI devices
- * without DMA support).
- *
- * Best-case reading (transfer from device):
- *   sg_miter_start(, SG_MITER_TO_SG);
- *   cb710_sg_dwiter_write_from_io();
- *   sg_miter_stop();
- *
- * Best-case writing (transfer to device):
- *   sg_miter_start(, SG_MITER_FROM_SG);
- *   cb710_sg_dwiter_read_to_io();
- *   sg_miter_stop();
- */
-
-uint32_t cb710_sg_dwiter_read_next_block(struct sg_mapping_iter *miter);
-void cb710_sg_dwiter_write_next_block(struct sg_mapping_iter *miter, uint32_t data);
-
-/**
- * cb710_sg_dwiter_write_from_io - transfer data to mapped buffer from 32-bit IO port
- * @miter: sg mapping iter
- * @port: PIO port - IO or MMIO address
- * @count: number of 32-bit words to transfer
- *
- * Description:
- *   Reads @count 32-bit words from register @port and stores it in
- *   buffer iterated by @miter.  Data that would overflow the buffer
- *   is silently ignored.  Iterator is advanced by 4*@count bytes
- *   or to the buffer's end whichever is closer.
- *
- * Context:
- *   IRQ disabled if the SG_MITER_ATOMIC is set.  Don't care otherwise.
- */
-static inline void cb710_sg_dwiter_write_from_io(struct sg_mapping_iter *miter,
-	void __iomem *port, size_t count)
-{
-	while (count-- > 0)
-		cb710_sg_dwiter_write_next_block(miter, ioread32(port));
-}
-
-/**
- * cb710_sg_dwiter_read_to_io - transfer data to 32-bit IO port from mapped buffer
- * @miter: sg mapping iter
- * @port: PIO port - IO or MMIO address
- * @count: number of 32-bit words to transfer
- *
- * Description:
- *   Writes @count 32-bit words to register @port from buffer iterated
- *   through @miter.  If buffer ends before @count words are written
- *   missing data is replaced by zeroes. @miter is advanced by 4*@count
- *   bytes or to the buffer's end whichever is closer.
- *
- * Context:
- *   IRQ disabled if the SG_MITER_ATOMIC is set.  Don't care otherwise.
- */
-static inline void cb710_sg_dwiter_read_to_io(struct sg_mapping_iter *miter,
-	void __iomem *port, size_t count)
-{
-	while (count-- > 0)
-		iowrite32(cb710_sg_dwiter_read_next_block(miter), port);
-}
-
-#endif /* LINUX_CB710_SG_H */
diff --git a/ANDROID_3.4.5/include/linux/cciss_defs.h b/ANDROID_3.4.5/include/linux/cciss_defs.h
deleted file mode 100644
index 316b670d..00000000
--- a/ANDROID_3.4.5/include/linux/cciss_defs.h
+++ /dev/null
@@ -1,130 +0,0 @@
-#ifndef CCISS_DEFS_H
-#define CCISS_DEFS_H
-
-#include <linux/types.h>
-
-/* general boundary definitions */
-#define SENSEINFOBYTES          32 /* note that this value may vary
-				      between host implementations */
-
-/* Command Status value */
-#define CMD_SUCCESS             0x0000
-#define CMD_TARGET_STATUS       0x0001
-#define CMD_DATA_UNDERRUN       0x0002
-#define CMD_DATA_OVERRUN        0x0003
-#define CMD_INVALID             0x0004
-#define CMD_PROTOCOL_ERR        0x0005
-#define CMD_HARDWARE_ERR        0x0006
-#define CMD_CONNECTION_LOST     0x0007
-#define CMD_ABORTED             0x0008
-#define CMD_ABORT_FAILED        0x0009
-#define CMD_UNSOLICITED_ABORT   0x000A
-#define CMD_TIMEOUT             0x000B
-#define CMD_UNABORTABLE		0x000C
-
-/* transfer direction */
-#define XFER_NONE               0x00
-#define XFER_WRITE              0x01
-#define XFER_READ               0x02
-#define XFER_RSVD               0x03
-
-/* task attribute */
-#define ATTR_UNTAGGED           0x00
-#define ATTR_SIMPLE             0x04
-#define ATTR_HEADOFQUEUE        0x05
-#define ATTR_ORDERED            0x06
-#define ATTR_ACA                0x07
-
-/* cdb type */
-#define TYPE_CMD				0x00
-#define TYPE_MSG				0x01
-
-/* Type defs used in the following structs */
-#define BYTE __u8
-#define WORD __u16
-#define HWORD __u16
-#define DWORD __u32
-
-#define CISS_MAX_LUN	1024
-
-#define LEVEL2LUN   1 /* index into Target(x) structure, due to byte swapping */
-#define LEVEL3LUN   0
-
-#pragma pack(1)
-
-/* Command List Structure */
-typedef union _SCSI3Addr_struct {
-   struct {
-    BYTE Dev;
-    BYTE Bus:6;
-    BYTE Mode:2;        /* b00 */
-  } PeripDev;
-   struct {
-    BYTE DevLSB;
-    BYTE DevMSB:6;
-    BYTE Mode:2;        /* b01 */
-  } LogDev;
-   struct {
-    BYTE Dev:5;
-    BYTE Bus:3;
-    BYTE Targ:6;
-    BYTE Mode:2;        /* b10 */
-  } LogUnit;
-} SCSI3Addr_struct;
-
-typedef struct _PhysDevAddr_struct {
-  DWORD             TargetId:24;
-  DWORD             Bus:6;
-  DWORD             Mode:2;
-  SCSI3Addr_struct  Target[2]; /* 2 level target device addr */
-} PhysDevAddr_struct;
-
-typedef struct _LogDevAddr_struct {
-  DWORD            VolId:30;
-  DWORD            Mode:2;
-  BYTE             reserved[4];
-} LogDevAddr_struct;
-
-typedef union _LUNAddr_struct {
-  BYTE               LunAddrBytes[8];
-  SCSI3Addr_struct   SCSI3Lun[4];
-  PhysDevAddr_struct PhysDev;
-  LogDevAddr_struct  LogDev;
-} LUNAddr_struct;
-
-typedef struct _RequestBlock_struct {
-  BYTE   CDBLen;
-  struct {
-    BYTE Type:3;
-    BYTE Attribute:3;
-    BYTE Direction:2;
-  } Type;
-  HWORD  Timeout;
-  BYTE   CDB[16];
-} RequestBlock_struct;
-
-typedef union _MoreErrInfo_struct{
-  struct {
-    BYTE  Reserved[3];
-    BYTE  Type;
-    DWORD ErrorInfo;
-  } Common_Info;
-  struct{
-    BYTE  Reserved[2];
-    BYTE  offense_size; /* size of offending entry */
-    BYTE  offense_num;  /* byte # of offense 0-base */
-    DWORD offense_value;
-  } Invalid_Cmd;
-} MoreErrInfo_struct;
-typedef struct _ErrorInfo_struct {
-  BYTE               ScsiStatus;
-  BYTE               SenseLen;
-  HWORD              CommandStatus;
-  DWORD              ResidualCnt;
-  MoreErrInfo_struct MoreErrInfo;
-  BYTE               SenseInfo[SENSEINFOBYTES];
-} ErrorInfo_struct;
-
-#pragma pack()
-
-#endif /* CCISS_DEFS_H */
diff --git a/ANDROID_3.4.5/include/linux/cciss_ioctl.h b/ANDROID_3.4.5/include/linux/cciss_ioctl.h
deleted file mode 100644
index 986493f5..00000000
--- a/ANDROID_3.4.5/include/linux/cciss_ioctl.h
+++ /dev/null
@@ -1,115 +0,0 @@
-#ifndef CCISS_IOCTLH
-#define CCISS_IOCTLH
-
-#include <linux/types.h>
-#include <linux/ioctl.h>
-#include <linux/cciss_defs.h>
-
-#define CCISS_IOC_MAGIC 'B'
-
-
-typedef struct _cciss_pci_info_struct
-{
-	unsigned char 	bus;
-	unsigned char 	dev_fn;
-	unsigned short	domain;
-	__u32 		board_id;
-} cciss_pci_info_struct; 
-
-typedef struct _cciss_coalint_struct
-{
-	__u32  delay;
-	__u32  count;
-} cciss_coalint_struct;
-
-typedef char NodeName_type[16];
-
-typedef __u32 Heartbeat_type;
-
-#define CISS_PARSCSIU2 	0x0001
-#define CISS_PARCSCIU3 	0x0002
-#define CISS_FIBRE1G	0x0100
-#define CISS_FIBRE2G	0x0200
-typedef __u32 BusTypes_type;
-
-typedef char FirmwareVer_type[4];
-typedef __u32 DriverVer_type;
-
-#define MAX_KMALLOC_SIZE 128000
-
-typedef struct _IOCTL_Command_struct {
-  LUNAddr_struct	   LUN_info;
-  RequestBlock_struct      Request;
-  ErrorInfo_struct  	   error_info; 
-  WORD			   buf_size;  /* size in bytes of the buf */
-  BYTE			   __user *buf;
-} IOCTL_Command_struct;
-
-typedef struct _BIG_IOCTL_Command_struct {
-  LUNAddr_struct	   LUN_info;
-  RequestBlock_struct      Request;
-  ErrorInfo_struct  	   error_info;
-  DWORD			   malloc_size; /* < MAX_KMALLOC_SIZE in cciss.c */
-  DWORD			   buf_size;    /* size in bytes of the buf */
-  				        /* < malloc_size * MAXSGENTRIES */
-  BYTE			   __user *buf;
-} BIG_IOCTL_Command_struct;
-
-typedef struct _LogvolInfo_struct{
-	__u32	LunID;
-	int	num_opens;  /* number of opens on the logical volume */
-	int	num_parts;  /* number of partitions configured on logvol */
-} LogvolInfo_struct;
-
-#define CCISS_GETPCIINFO _IOR(CCISS_IOC_MAGIC, 1, cciss_pci_info_struct)
-
-#define CCISS_GETINTINFO _IOR(CCISS_IOC_MAGIC, 2, cciss_coalint_struct)
-#define CCISS_SETINTINFO _IOW(CCISS_IOC_MAGIC, 3, cciss_coalint_struct)
-
-#define CCISS_GETNODENAME _IOR(CCISS_IOC_MAGIC, 4, NodeName_type)
-#define CCISS_SETNODENAME _IOW(CCISS_IOC_MAGIC, 5, NodeName_type)
-
-#define CCISS_GETHEARTBEAT _IOR(CCISS_IOC_MAGIC, 6, Heartbeat_type)
-#define CCISS_GETBUSTYPES  _IOR(CCISS_IOC_MAGIC, 7, BusTypes_type)
-#define CCISS_GETFIRMVER   _IOR(CCISS_IOC_MAGIC, 8, FirmwareVer_type)
-#define CCISS_GETDRIVVER   _IOR(CCISS_IOC_MAGIC, 9, DriverVer_type)
-#define CCISS_REVALIDVOLS  _IO(CCISS_IOC_MAGIC, 10)
-#define CCISS_PASSTHRU	   _IOWR(CCISS_IOC_MAGIC, 11, IOCTL_Command_struct)
-#define CCISS_DEREGDISK	   _IO(CCISS_IOC_MAGIC, 12)
-
-/* no longer used... use REGNEWD instead */ 
-#define CCISS_REGNEWDISK  _IOW(CCISS_IOC_MAGIC, 13, int)
-
-#define CCISS_REGNEWD	   _IO(CCISS_IOC_MAGIC, 14)
-#define CCISS_RESCANDISK   _IO(CCISS_IOC_MAGIC, 16)
-#define CCISS_GETLUNINFO   _IOR(CCISS_IOC_MAGIC, 17, LogvolInfo_struct)
-#define CCISS_BIG_PASSTHRU _IOWR(CCISS_IOC_MAGIC, 18, BIG_IOCTL_Command_struct)
-
-#ifdef __KERNEL__
-#ifdef CONFIG_COMPAT
-
-/* 32 bit compatible ioctl structs */
-typedef struct _IOCTL32_Command_struct {
-  LUNAddr_struct	   LUN_info;
-  RequestBlock_struct      Request;
-  ErrorInfo_struct  	   error_info;
-  WORD			   buf_size;  /* size in bytes of the buf */
-  __u32			   buf; /* 32 bit pointer to data buffer */
-} IOCTL32_Command_struct;
-
-typedef struct _BIG_IOCTL32_Command_struct {
-  LUNAddr_struct	   LUN_info;
-  RequestBlock_struct      Request;
-  ErrorInfo_struct  	   error_info;
-  DWORD			   malloc_size; /* < MAX_KMALLOC_SIZE in cciss.c */
-  DWORD			   buf_size;    /* size in bytes of the buf */
-  				        /* < malloc_size * MAXSGENTRIES */
-  __u32 		buf;	/* 32 bit pointer to data buffer */
-} BIG_IOCTL32_Command_struct;
-
-#define CCISS_PASSTHRU32   _IOWR(CCISS_IOC_MAGIC, 11, IOCTL32_Command_struct)
-#define CCISS_BIG_PASSTHRU32 _IOWR(CCISS_IOC_MAGIC, 18, BIG_IOCTL32_Command_struct)
-
-#endif /* CONFIG_COMPAT */
-#endif /* __KERNEL__ */
-#endif  
diff --git a/ANDROID_3.4.5/include/linux/cd1400.h b/ANDROID_3.4.5/include/linux/cd1400.h
deleted file mode 100644
index 1dc3ab05..00000000
--- a/ANDROID_3.4.5/include/linux/cd1400.h
+++ /dev/null
@@ -1,292 +0,0 @@
-/*****************************************************************************/
-
-/*
- *	cd1400.h  -- cd1400 UART hardware info.
- *
- *	Copyright (C) 1996-1998  Stallion Technologies
- *	Copyright (C) 1994-1996  Greg Ungerer.
- *
- *	This program is free software; you can redistribute it and/or modify
- *	it under the terms of the GNU General Public License as published by
- *	the Free Software Foundation; either version 2 of the License, or
- *	(at your option) any later version.
- *
- *	This program is distributed in the hope that it will be useful,
- *	but WITHOUT ANY WARRANTY; without even the implied warranty of
- *	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *	GNU General Public License for more details.
- *
- *	You should have received a copy of the GNU General Public License
- *	along with this program; if not, write to the Free Software
- *	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-/*****************************************************************************/
-#ifndef	_CD1400_H
-#define	_CD1400_H
-/*****************************************************************************/
-
-/*
- *	Define the number of async ports per cd1400 uart chip.
- */
-#define	CD1400_PORTS		4
-
-/*
- *	Define the cd1400 uarts internal FIFO sizes.
- */
-#define	CD1400_TXFIFOSIZE	12
-#define	CD1400_RXFIFOSIZE	12
-
-/*
- *	Local RX FIFO thresh hold level. Also define the RTS thresh hold
- *	based on the RX thresh hold.
- */
-#define	FIFO_RXTHRESHOLD	6
-#define	FIFO_RTSTHRESHOLD	7
-
-/*****************************************************************************/
-
-/*
- *	Define the cd1400 register addresses. These are all the valid
- *	registers with the cd1400. Some are global, some virtual, some
- *	per port.
- */
-#define	GFRCR		0x40
-#define	CAR		0x68
-#define	GCR		0x4b
-#define	SVRR		0x67
-#define	RICR		0x44
-#define	TICR		0x45
-#define	MICR		0x46
-#define	RIR		0x6b
-#define	TIR		0x6a
-#define	MIR		0x69
-#define	PPR		0x7e
-
-#define	RIVR		0x43
-#define	TIVR		0x42
-#define	MIVR		0x41
-#define	TDR		0x63
-#define	RDSR		0x62
-#define	MISR		0x4c
-#define	EOSRR		0x60
-
-#define	LIVR		0x18
-#define	CCR		0x05
-#define	SRER		0x06
-#define	COR1		0x08
-#define	COR2		0x09
-#define	COR3		0x0a
-#define	COR4		0x1e
-#define	COR5		0x1f
-#define	CCSR		0x0b
-#define	RDCR		0x0e
-#define	SCHR1		0x1a
-#define	SCHR2		0x1b
-#define	SCHR3		0x1c
-#define	SCHR4		0x1d
-#define	SCRL		0x22
-#define	SCRH		0x23
-#define	LNC		0x24
-#define	MCOR1		0x15
-#define	MCOR2		0x16
-#define	RTPR		0x21
-#define	MSVR1		0x6c
-#define	MSVR2		0x6d
-#define	PSVR		0x6f
-#define	RBPR		0x78
-#define	RCOR		0x7c
-#define	TBPR		0x72
-#define	TCOR		0x76
-
-/*****************************************************************************/
-
-/*
- *	Define the set of baud rate clock divisors.
- */
-#define	CD1400_CLK0	8
-#define	CD1400_CLK1	32
-#define	CD1400_CLK2	128
-#define	CD1400_CLK3	512
-#define	CD1400_CLK4	2048
-
-#define	CD1400_NUMCLKS	5
-
-/*****************************************************************************/
-
-/*
- *	Define the clock pre-scalar value to be a 5 ms clock. This should be
- *	OK for now. It would probably be better to make it 10 ms, but we
- *	can't fit that divisor into 8 bits!
- */
-#define	PPR_SCALAR	244
-
-/*****************************************************************************/
-
-/*
- *	Define values used to set character size options.
- */
-#define	COR1_CHL5	0x00
-#define	COR1_CHL6	0x01
-#define	COR1_CHL7	0x02
-#define	COR1_CHL8	0x03
-
-/*
- *	Define values used to set the number of stop bits.
- */
-#define	COR1_STOP1	0x00
-#define	COR1_STOP15	0x04
-#define	COR1_STOP2	0x08
-
-/*
- *	Define values used to set the parity scheme in use.
- */
-#define	COR1_PARNONE	0x00
-#define	COR1_PARFORCE	0x20
-#define	COR1_PARENB	0x40
-#define	COR1_PARIGNORE	0x10
-
-#define	COR1_PARODD	0x80
-#define	COR1_PAREVEN	0x00
-
-#define	COR2_IXM	0x80
-#define	COR2_TXIBE	0x40
-#define	COR2_ETC	0x20
-#define	COR2_LLM	0x10
-#define	COR2_RLM	0x08
-#define	COR2_RTSAO	0x04
-#define	COR2_CTSAE	0x02
-
-#define	COR3_SCDRNG	0x80
-#define	COR3_SCD34	0x40
-#define	COR3_FCT	0x20
-#define	COR3_SCD12	0x10
-
-/*
- *	Define values used by COR4.
- */
-#define	COR4_BRKINT	0x08
-#define	COR4_IGNBRK	0x18
-
-/*****************************************************************************/
-
-/*
- *	Define the modem control register values.
- *	Note that the actual hardware is a little different to the conventional
- *	pin names on the cd1400.
- */
-#define	MSVR1_DTR	0x01
-#define	MSVR1_DSR	0x10
-#define	MSVR1_RI	0x20
-#define	MSVR1_CTS	0x40
-#define	MSVR1_DCD	0x80
-
-#define	MSVR2_RTS	0x02
-#define	MSVR2_DSR	0x10
-#define	MSVR2_RI	0x20
-#define	MSVR2_CTS	0x40
-#define	MSVR2_DCD	0x80
-
-#define	MCOR1_DCD	0x80
-#define	MCOR1_CTS	0x40
-#define	MCOR1_RI	0x20
-#define	MCOR1_DSR	0x10
-
-#define	MCOR2_DCD	0x80
-#define	MCOR2_CTS	0x40
-#define	MCOR2_RI	0x20
-#define	MCOR2_DSR	0x10
-
-/*****************************************************************************/
-
-/*
- *	Define the bits used with the service (interrupt) enable register.
- */
-#define	SRER_NNDT	0x01
-#define	SRER_TXEMPTY	0x02
-#define	SRER_TXDATA	0x04
-#define	SRER_RXDATA	0x10
-#define	SRER_MODEM	0x80
-
-/*****************************************************************************/
-
-/*
- *	Define operational commands for the command register.
- */
-#define	CCR_RESET	0x80
-#define	CCR_CORCHANGE	0x4e
-#define	CCR_SENDCH	0x20
-#define	CCR_CHANCTRL	0x10
-
-#define	CCR_TXENABLE	(CCR_CHANCTRL | 0x08)
-#define	CCR_TXDISABLE	(CCR_CHANCTRL | 0x04)
-#define	CCR_RXENABLE	(CCR_CHANCTRL | 0x02)
-#define	CCR_RXDISABLE	(CCR_CHANCTRL | 0x01)
-
-#define	CCR_SENDSCHR1	(CCR_SENDCH | 0x01)
-#define	CCR_SENDSCHR2	(CCR_SENDCH | 0x02)
-#define	CCR_SENDSCHR3	(CCR_SENDCH | 0x03)
-#define	CCR_SENDSCHR4	(CCR_SENDCH | 0x04)
-
-#define	CCR_RESETCHAN	(CCR_RESET | 0x00)
-#define	CCR_RESETFULL	(CCR_RESET | 0x01)
-#define	CCR_TXFLUSHFIFO	(CCR_RESET | 0x02)
-
-#define	CCR_MAXWAIT	10000
-
-/*****************************************************************************/
-
-/*
- *	Define the valid acknowledgement types (for hw ack cycle).
- */
-#define	ACK_TYPMASK	0x07
-#define	ACK_TYPTX	0x02
-#define	ACK_TYPMDM	0x01
-#define	ACK_TYPRXGOOD	0x03
-#define	ACK_TYPRXBAD	0x07
-
-#define	SVRR_RX		0x01
-#define	SVRR_TX		0x02
-#define	SVRR_MDM	0x04
-
-#define	ST_OVERRUN	0x01
-#define	ST_FRAMING	0x02
-#define	ST_PARITY	0x04
-#define	ST_BREAK	0x08
-#define	ST_SCHAR1	0x10
-#define	ST_SCHAR2	0x20
-#define	ST_SCHAR3	0x30
-#define	ST_SCHAR4	0x40
-#define	ST_RANGE	0x70
-#define	ST_SCHARMASK	0x70
-#define	ST_TIMEOUT	0x80
-
-#define	MISR_DCD	0x80
-#define	MISR_CTS	0x40
-#define	MISR_RI		0x20
-#define	MISR_DSR	0x10
-
-/*****************************************************************************/
-
-/*
- *	Defines for the CCSR status register.
- */
-#define	CCSR_RXENABLED	0x80
-#define	CCSR_RXFLOWON	0x40
-#define	CCSR_RXFLOWOFF	0x20
-#define	CCSR_TXENABLED	0x08
-#define	CCSR_TXFLOWON	0x04
-#define	CCSR_TXFLOWOFF	0x02
-
-/*****************************************************************************/
-
-/*
- *	Define the embedded commands.
- */
-#define	ETC_CMD		0x00
-#define	ETC_STARTBREAK	0x81
-#define	ETC_DELAY	0x82
-#define	ETC_STOPBREAK	0x83
-
-/*****************************************************************************/
-#endif
diff --git a/ANDROID_3.4.5/include/linux/cdev.h b/ANDROID_3.4.5/include/linux/cdev.h
deleted file mode 100644
index fb459197..00000000
--- a/ANDROID_3.4.5/include/linux/cdev.h
+++ /dev/null
@@ -1,35 +0,0 @@
-#ifndef _LINUX_CDEV_H
-#define _LINUX_CDEV_H
-
-#include <linux/kobject.h>
-#include <linux/kdev_t.h>
-#include <linux/list.h>
-
-struct file_operations;
-struct inode;
-struct module;
-
-struct cdev {
-	struct kobject kobj;
-	struct module *owner;
-	const struct file_operations *ops;
-	struct list_head list;
-	dev_t dev;
-	unsigned int count;
-};
-
-void cdev_init(struct cdev *, const struct file_operations *);
-
-struct cdev *cdev_alloc(void);
-
-void cdev_put(struct cdev *p);
-
-int cdev_add(struct cdev *, dev_t, unsigned);
-
-void cdev_del(struct cdev *);
-
-void cd_forget(struct inode *);
-
-extern struct backing_dev_info directly_mappable_cdev_bdi;
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/cdk.h b/ANDROID_3.4.5/include/linux/cdk.h
deleted file mode 100644
index 80093a8d..00000000
--- a/ANDROID_3.4.5/include/linux/cdk.h
+++ /dev/null
@@ -1,486 +0,0 @@
-/*****************************************************************************/
-
-/*
- *	cdk.h  -- CDK interface definitions.
- *
- *	Copyright (C) 1996-1998  Stallion Technologies
- *	Copyright (C) 1994-1996  Greg Ungerer.
- *
- *	This program is free software; you can redistribute it and/or modify
- *	it under the terms of the GNU General Public License as published by
- *	the Free Software Foundation; either version 2 of the License, or
- *	(at your option) any later version.
- *
- *	This program is distributed in the hope that it will be useful,
- *	but WITHOUT ANY WARRANTY; without even the implied warranty of
- *	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *	GNU General Public License for more details.
- *
- *	You should have received a copy of the GNU General Public License
- *	along with this program; if not, write to the Free Software
- *	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-/*****************************************************************************/
-#ifndef	_CDK_H
-#define	_CDK_H
-/*****************************************************************************/
-
-#pragma	pack(2)
-
-/*
- *	The following set of definitions is used to communicate with the
- *	shared memory interface of the Stallion intelligent multiport serial
- *	boards. The definitions in this file are taken directly from the
- *	document titled "Generic Stackable Interface, Downloader and
- *	Communications Development Kit".
- */
-
-/*
- *	Define the set of important shared memory addresses. These are
- *	required to initialize the board and get things started. All of these
- *	addresses are relative to the start of the shared memory.
- */
-#define	CDK_SIGADDR	0x200
-#define	CDK_FEATADDR	0x280
-#define	CDK_CDKADDR	0x300
-#define	CDK_RDYADDR	0x262
-
-#define	CDK_ALIVEMARKER	13
-
-/*
- *	On hardware power up the ROMs located on the EasyConnection 8/64 will
- *	fill out the following signature information into shared memory. This
- *	way the host system can quickly determine that the board is present
- *	and is operational.
- */
-typedef struct cdkecpsig {
-	unsigned long	magic;
-	unsigned short	romver;
-	unsigned short	cputype;
-	unsigned char	panelid[8];
-} cdkecpsig_t;
-
-#define	ECP_MAGIC	0x21504345
-
-/*
- *	On hardware power up the ROMs located on the ONboard, Stallion and
- *	Brumbys will fill out the following signature information into shared
- *	memory. This way the host system can quickly determine that the board
- *	is present and is operational.
- */
-typedef struct cdkonbsig {
-	unsigned short	magic0;
-	unsigned short	magic1;
-	unsigned short	magic2;
-	unsigned short	magic3;
-	unsigned short	romver;
-	unsigned short	memoff;
-	unsigned short	memseg;
-	unsigned short	amask0;
-	unsigned short	pic;
-	unsigned short	status;
-	unsigned short	btype;
-	unsigned short	clkticks;
-	unsigned short	clkspeed;
-	unsigned short	amask1;
-	unsigned short	amask2;
-} cdkonbsig_t;
-
-#define	ONB_MAGIC0	0xf2a7
-#define	ONB_MAGIC1	0xa149
-#define	ONB_MAGIC2	0x6352
-#define	ONB_MAGIC3	0xf121
-
-/*
- *	Define the feature area structure. The feature area is the set of
- *	startup parameters used by the slave image when it starts executing.
- *	They allow for the specification of buffer sizes, debug trace, etc.
- */
-typedef struct cdkfeature {
-	unsigned long	debug;
-	unsigned long	banner;
-	unsigned long	etype;
-	unsigned long	nrdevs;
-	unsigned long	brdspec;
-	unsigned long	txrqsize;
-	unsigned long	rxrqsize;
-	unsigned long	flags;
-} cdkfeature_t;
-
-#define	ETYP_DDK	0
-#define	ETYP_CDK	1
-
-/*
- *	Define the CDK header structure. This is the info that the slave
- *	environment sets up after it has been downloaded and started. It
- *	essentially provides a memory map for the shared memory interface.
- */
-typedef struct cdkhdr {
-	unsigned short	command;
-	unsigned short	status;
-	unsigned short	port;
-	unsigned short	mode;
-	unsigned long	cmd_buf[14];
-	unsigned short	alive_cnt;
-	unsigned short	intrpt_mode;
-	unsigned char	intrpt_id[8];
-	unsigned char	ver_release;
-	unsigned char	ver_modification;
-	unsigned char	ver_fix;
-	unsigned char	deadman_restart;
-	unsigned short	deadman;
-	unsigned short	nrdevs;
-	unsigned long	memp;
-	unsigned long	hostp;
-	unsigned long	slavep;
-	unsigned char	hostreq;
-	unsigned char	slavereq;
-	unsigned char	cmd_reserved[30];
-} cdkhdr_t;
-
-#define	MODE_DDK	0
-#define	MODE_CDK	1
-
-#define	IMD_INTR	0x0
-#define	IMD_PPINTR	0x1
-#define	IMD_POLL	0xff
-
-/*
- *	Define the memory mapping structure. This structure is pointed to by
- *	the memp field in the stlcdkhdr struct. As many as these structures
- *	as required are laid out in shared memory to define how the rest of
- *	shared memory is divided up. There will be one for each port.
- */
-typedef struct cdkmem {
-	unsigned short	dtype;
-	unsigned long	offset;
-} cdkmem_t;
-
-#define	TYP_UNDEFINED	0x0
-#define	TYP_ASYNCTRL	0x1
-#define	TYP_ASYNC	0x20
-#define	TYP_PARALLEL	0x40
-#define	TYP_SYNCX21	0x60
-
-/*****************************************************************************/
-
-/*
- *	Following is a set of defines and structures used to actually deal
- *	with the serial ports on the board. Firstly is the set of commands
- *	that can be applied to ports.
- */
-#define	ASYCMD		(((unsigned long) 'a') << 8)
-
-#define	A_NULL		(ASYCMD | 0)
-#define	A_FLUSH		(ASYCMD | 1)
-#define	A_BREAK		(ASYCMD | 2)
-#define	A_GETPORT	(ASYCMD | 3)
-#define	A_SETPORT	(ASYCMD | 4)
-#define	A_SETPORTF	(ASYCMD | 5)
-#define	A_SETPORTFTX	(ASYCMD | 6)
-#define	A_SETPORTFRX	(ASYCMD | 7)
-#define	A_GETSIGNALS	(ASYCMD | 8)
-#define	A_SETSIGNALS	(ASYCMD | 9)
-#define	A_SETSIGNALSF	(ASYCMD | 10)
-#define	A_SETSIGNALSFTX	(ASYCMD | 11)
-#define	A_SETSIGNALSFRX	(ASYCMD | 12)
-#define	A_GETNOTIFY	(ASYCMD | 13)
-#define	A_SETNOTIFY	(ASYCMD | 14)
-#define	A_NOTIFY	(ASYCMD | 15)
-#define	A_PORTCTRL	(ASYCMD | 16)
-#define	A_GETSTATS	(ASYCMD | 17)
-#define	A_RQSTATE	(ASYCMD | 18)
-#define	A_FLOWSTATE	(ASYCMD | 19)
-#define	A_CLEARSTATS	(ASYCMD | 20)
-
-/*
- *	Define those arguments used for simple commands.
- */
-#define	FLUSHRX		0x1
-#define	FLUSHTX		0x2
-
-#define	BREAKON		-1
-#define	BREAKOFF	-2
-
-/*
- *	Define the port setting structure, and all those defines that go along
- *	with it. Basically this structure defines the characteristics of this
- *	port: baud rate, chars, parity, input/output char cooking etc.
- */
-typedef struct asyport {
-	unsigned long	baudout;
-	unsigned long	baudin;
-	unsigned long	iflag;
-	unsigned long	oflag;
-	unsigned long	lflag;
-	unsigned long	pflag;
-	unsigned long	flow;
-	unsigned long	spare1;
-	unsigned short	vtime;
-	unsigned short	vmin;
-	unsigned short	txlo;
-	unsigned short	txhi;
-	unsigned short	rxlo;
-	unsigned short	rxhi;
-	unsigned short	rxhog;
-	unsigned short	spare2;
-	unsigned char	csize;
-	unsigned char	stopbs;
-	unsigned char	parity;
-	unsigned char	stopin;
-	unsigned char	startin;
-	unsigned char	stopout;
-	unsigned char	startout;
-	unsigned char	parmark;
-	unsigned char	brkmark;
-	unsigned char	cc[11];
-} asyport_t;
-
-#define	PT_STOP1	0x0
-#define	PT_STOP15	0x1
-#define	PT_STOP2	0x2
-
-#define	PT_NOPARITY	0x0
-#define	PT_ODDPARITY	0x1
-#define	PT_EVENPARITY	0x2
-#define	PT_MARKPARITY	0x3
-#define	PT_SPACEPARITY	0x4
-
-#define	F_NONE		0x0
-#define	F_IXON		0x1
-#define	F_IXOFF		0x2
-#define	F_IXANY		0x4
-#define	F_IOXANY	0x8
-#define	F_RTSFLOW	0x10
-#define	F_CTSFLOW	0x20
-#define	F_DTRFLOW	0x40
-#define	F_DCDFLOW	0x80
-#define	F_DSROFLOW	0x100
-#define	F_DSRIFLOW	0x200
-
-#define	FI_NORX		0x1
-#define	FI_RAW		0x2
-#define	FI_ISTRIP	0x4
-#define	FI_UCLC		0x8
-#define	FI_INLCR	0x10
-#define	FI_ICRNL	0x20
-#define	FI_IGNCR	0x40
-#define	FI_IGNBREAK	0x80
-#define	FI_DSCRDBREAK	0x100
-#define	FI_1MARKBREAK	0x200
-#define	FI_2MARKBREAK	0x400
-#define	FI_XCHNGBREAK	0x800
-#define	FI_IGNRXERRS	0x1000
-#define	FI_DSCDRXERRS	0x2000
-#define	FI_1MARKRXERRS	0x4000
-#define	FI_2MARKRXERRS	0x8000
-#define	FI_XCHNGRXERRS	0x10000
-#define	FI_DSCRDNULL	0x20000
-
-#define	FO_OLCUC	0x1
-#define	FO_ONLCR	0x2
-#define	FO_OOCRNL	0x4
-#define	FO_ONOCR	0x8
-#define	FO_ONLRET	0x10
-#define	FO_ONL		0x20
-#define	FO_OBS		0x40
-#define	FO_OVT		0x80
-#define	FO_OFF		0x100
-#define	FO_OTAB1	0x200
-#define	FO_OTAB2	0x400
-#define	FO_OTAB3	0x800
-#define	FO_OCR1		0x1000
-#define	FO_OCR2		0x2000
-#define	FO_OCR3		0x4000
-#define	FO_OFILL	0x8000
-#define	FO_ODELL	0x10000
-
-#define	P_RTSLOCK	0x1
-#define	P_CTSLOCK	0x2
-#define	P_MAPRTS	0x4
-#define	P_MAPCTS	0x8
-#define	P_LOOPBACK	0x10
-#define	P_DTRFOLLOW	0x20
-#define	P_FAKEDCD	0x40
-
-#define	P_RXIMIN	0x10000
-#define	P_RXITIME	0x20000
-#define	P_RXTHOLD	0x40000
-
-/*
- *	Define a structure to communicate serial port signal and data state
- *	information.
- */
-typedef struct asysigs {
-	unsigned long	data;
-	unsigned long	signal;
-	unsigned long	sigvalue;
-} asysigs_t;
-
-#define	DT_TXBUSY	0x1
-#define	DT_TXEMPTY	0x2
-#define	DT_TXLOW	0x4
-#define	DT_TXHIGH	0x8
-#define	DT_TXFULL	0x10
-#define	DT_TXHOG	0x20
-#define	DT_TXFLOWED	0x40
-#define	DT_TXBREAK	0x80
-
-#define	DT_RXBUSY	0x100
-#define	DT_RXEMPTY	0x200
-#define	DT_RXLOW	0x400
-#define	DT_RXHIGH	0x800
-#define	DT_RXFULL	0x1000
-#define	DT_RXHOG	0x2000
-#define	DT_RXFLOWED	0x4000
-#define	DT_RXBREAK	0x8000
-
-#define	SG_DTR		0x1
-#define	SG_DCD		0x2
-#define	SG_RTS		0x4
-#define	SG_CTS		0x8
-#define	SG_DSR		0x10
-#define	SG_RI		0x20
-
-/*
- *	Define the notification setting structure. This is used to tell the
- *	port what events we want to be informed about. Fields here use the
- *	same defines as for the asysigs structure above.
- */
-typedef struct asynotify {
-	unsigned long	ctrl;
-	unsigned long	data;
-	unsigned long	signal;
-	unsigned long	sigvalue;
-} asynotify_t;
-
-/*
- *	Define the port control structure. It is used to do fine grain
- *	control operations on the port.
- */
-typedef struct {
-	unsigned long	rxctrl;
-	unsigned long	txctrl;
-	char		rximdch;
-	char		tximdch;
-	char		spare1;
-	char		spare2;
-} asyctrl_t;
-
-#define	CT_ENABLE	0x1
-#define	CT_DISABLE	0x2
-#define	CT_STOP		0x4
-#define	CT_START	0x8
-#define	CT_STARTFLOW	0x10
-#define	CT_STOPFLOW	0x20
-#define	CT_SENDCHR	0x40
-
-/*
- *	Define the stats structure kept for each port. This is a useful set
- *	of data collected for each port on the slave. The A_GETSTATS command
- *	is used to retrieve this data from the slave.
- */
-typedef struct asystats {
-	unsigned long	opens;
-	unsigned long	txchars;
-	unsigned long	rxchars;
-	unsigned long	txringq;
-	unsigned long	rxringq;
-	unsigned long	txmsgs;
-	unsigned long	rxmsgs;
-	unsigned long	txflushes;
-	unsigned long	rxflushes;
-	unsigned long	overruns;
-	unsigned long	framing;
-	unsigned long	parity;
-	unsigned long	ringover;
-	unsigned long	lost;
-	unsigned long	rxstart;
-	unsigned long	rxstop;
-	unsigned long	txstart;
-	unsigned long	txstop;
-	unsigned long	dcdcnt;
-	unsigned long	dtrcnt;
-	unsigned long	ctscnt;
-	unsigned long	rtscnt;
-	unsigned long	dsrcnt;
-	unsigned long	ricnt;
-	unsigned long	txbreaks;
-	unsigned long	rxbreaks;
-	unsigned long	signals;
-	unsigned long	state;
-	unsigned long	hwid;
-} asystats_t;
-
-/*****************************************************************************/
-
-/*
- *	All command and control communication with a device on the slave is
- *	via a control block in shared memory. Each device has its own control
- *	block, defined by the following structure. The control block allows
- *	the host to open, close and control the device on the slave.
- */
-typedef struct cdkctrl {
-	unsigned char	open;
-	unsigned char	close;
-	unsigned long	openarg;
-	unsigned long	closearg;
-	unsigned long	cmd;
-	unsigned long	status;
-	unsigned long	args[32];
-} cdkctrl_t;
-
-/*
- *	Each device on the slave passes data to and from the host via a ring
- *	queue in shared memory. Define a ring queue structure to hold the
- *	vital information about each ring queue. Two ring queues will be
- *	allocated for each port, one for receive data and one for transmit
- *	data.
- */
-typedef struct cdkasyrq {
-	unsigned long	offset;
-	unsigned short	size;
-	unsigned short	head;
-	unsigned short	tail;
-} cdkasyrq_t;
-
-/*
- *	Each asynchronous port is defined in shared memory by the following
- *	structure. It contains a control block to command a device, and also
- *	the necessary data channel information as well.
- */
-typedef struct cdkasy {
-	cdkctrl_t	ctrl;
-	unsigned short	notify;
-	asynotify_t	changed;
-	unsigned short	receive;
-	cdkasyrq_t	rxq;
-	unsigned short	transmit;
-	cdkasyrq_t	txq;
-} cdkasy_t;
-
-#pragma	pack()
-
-/*****************************************************************************/
-
-/*
- *	Define the set of ioctls used by the driver to do special things
- *	to the board. These include interrupting it, and initializing
- *	the driver after board startup and shutdown.
- */
-#include <linux/ioctl.h>
-
-#define	STL_BINTR	_IO('s',20)
-#define	STL_BSTART	_IO('s',21)
-#define	STL_BSTOP	_IO('s',22)
-#define	STL_BRESET	_IO('s',23)
-
-/*
- *	Define a set of ioctl extensions, used to get at special stuff.
- */
-#define	STL_GETPFLAG	_IO('s',80)
-#define	STL_SETPFLAG	_IO('s',81)
-
-/*****************************************************************************/
-#endif
diff --git a/ANDROID_3.4.5/include/linux/cdrom.h b/ANDROID_3.4.5/include/linux/cdrom.h
deleted file mode 100644
index dfd7f187..00000000
--- a/ANDROID_3.4.5/include/linux/cdrom.h
+++ /dev/null
@@ -1,1214 +0,0 @@
-/*
- * -- <linux/cdrom.h>
- * General header file for linux CD-ROM drivers 
- * Copyright (C) 1992         David Giller, rafetmad@oxy.edu
- *               1994, 1995   Eberhard Mönkeberg, emoenke@gwdg.de
- *               1996         David van Leeuwen, david@tm.tno.nl
- *               1997, 1998   Erik Andersen, andersee@debian.org
- *               1998-2002    Jens Axboe, axboe@suse.de
- */
- 
-#ifndef	_LINUX_CDROM_H
-#define	_LINUX_CDROM_H
-
-#include <linux/types.h>
-#include <asm/byteorder.h>
-
-/*******************************************************
- * As of Linux 2.1.x, all Linux CD-ROM application programs will use this 
- * (and only this) include file.  It is my hope to provide Linux with
- * a uniform interface between software accessing CD-ROMs and the various 
- * device drivers that actually talk to the drives.  There may still be
- * 23 different kinds of strange CD-ROM drives, but at least there will 
- * now be one, and only one, Linux CD-ROM interface.
- *
- * Additionally, as of Linux 2.1.x, all Linux application programs 
- * should use the O_NONBLOCK option when opening a CD-ROM device 
- * for subsequent ioctl commands.  This allows for neat system errors 
- * like "No medium found" or "Wrong medium type" upon attempting to 
- * mount or play an empty slot, mount an audio disc, or play a data disc.
- * Generally, changing an application program to support O_NONBLOCK
- * is as easy as the following:
- *       -    drive = open("/dev/cdrom", O_RDONLY);
- *       +    drive = open("/dev/cdrom", O_RDONLY | O_NONBLOCK);
- * It is worth the small change.
- *
- *  Patches for many common CD programs (provided by David A. van Leeuwen)
- *  can be found at:  ftp://ftp.gwdg.de/pub/linux/cdrom/drivers/cm206/
- * 
- *******************************************************/
-
-/* When a driver supports a certain function, but the cdrom drive we are 
- * using doesn't, we will return the error EDRIVE_CANT_DO_THIS.  We will 
- * borrow the "Operation not supported" error from the network folks to 
- * accomplish this.  Maybe someday we will get a more targeted error code, 
- * but this will do for now... */
-#define EDRIVE_CANT_DO_THIS  EOPNOTSUPP
-
-/*******************************************************
- * The CD-ROM IOCTL commands  -- these should be supported by 
- * all the various cdrom drivers.  For the CD-ROM ioctls, we 
- * will commandeer byte 0x53, or 'S'.
- *******************************************************/
-#define CDROMPAUSE		0x5301 /* Pause Audio Operation */ 
-#define CDROMRESUME		0x5302 /* Resume paused Audio Operation */
-#define CDROMPLAYMSF		0x5303 /* Play Audio MSF (struct cdrom_msf) */
-#define CDROMPLAYTRKIND		0x5304 /* Play Audio Track/index 
-                                           (struct cdrom_ti) */
-#define CDROMREADTOCHDR		0x5305 /* Read TOC header 
-                                           (struct cdrom_tochdr) */
-#define CDROMREADTOCENTRY	0x5306 /* Read TOC entry 
-                                           (struct cdrom_tocentry) */
-#define CDROMSTOP		0x5307 /* Stop the cdrom drive */
-#define CDROMSTART		0x5308 /* Start the cdrom drive */
-#define CDROMEJECT		0x5309 /* Ejects the cdrom media */
-#define CDROMVOLCTRL		0x530a /* Control output volume 
-                                           (struct cdrom_volctrl) */
-#define CDROMSUBCHNL		0x530b /* Read subchannel data 
-                                           (struct cdrom_subchnl) */
-#define CDROMREADMODE2		0x530c /* Read CDROM mode 2 data (2336 Bytes) 
-                                           (struct cdrom_read) */
-#define CDROMREADMODE1		0x530d /* Read CDROM mode 1 data (2048 Bytes)
-                                           (struct cdrom_read) */
-#define CDROMREADAUDIO		0x530e /* (struct cdrom_read_audio) */
-#define CDROMEJECT_SW		0x530f /* enable(1)/disable(0) auto-ejecting */
-#define CDROMMULTISESSION	0x5310 /* Obtain the start-of-last-session 
-                                           address of multi session disks 
-                                           (struct cdrom_multisession) */
-#define CDROM_GET_MCN		0x5311 /* Obtain the "Universal Product Code" 
-                                           if available (struct cdrom_mcn) */
-#define CDROM_GET_UPC		CDROM_GET_MCN  /* This one is deprecated, 
-                                          but here anyway for compatibility */
-#define CDROMRESET		0x5312 /* hard-reset the drive */
-#define CDROMVOLREAD		0x5313 /* Get the drive's volume setting 
-                                          (struct cdrom_volctrl) */
-#define CDROMREADRAW		0x5314	/* read data in raw mode (2352 Bytes)
-                                           (struct cdrom_read) */
-/* 
- * These ioctls are used only used in aztcd.c and optcd.c
- */
-#define CDROMREADCOOKED		0x5315	/* read data in cooked mode */
-#define CDROMSEEK		0x5316  /* seek msf address */
-  
-/*
- * This ioctl is only used by the scsi-cd driver.  
-   It is for playing audio in logical block addressing mode.
- */
-#define CDROMPLAYBLK		0x5317	/* (struct cdrom_blk) */
-
-/* 
- * These ioctls are only used in optcd.c
- */
-#define CDROMREADALL		0x5318	/* read all 2646 bytes */
-
-/* 
- * These ioctls are (now) only in ide-cd.c for controlling 
- * drive spindown time.  They should be implemented in the
- * Uniform driver, via generic packet commands, GPCMD_MODE_SELECT_10,
- * GPCMD_MODE_SENSE_10 and the GPMODE_POWER_PAGE...
- *  -Erik
- */
-#define CDROMGETSPINDOWN        0x531d
-#define CDROMSETSPINDOWN        0x531e
-
-/* 
- * These ioctls are implemented through the uniform CD-ROM driver
- * They _will_ be adopted by all CD-ROM drivers, when all the CD-ROM
- * drivers are eventually ported to the uniform CD-ROM driver interface.
- */
-#define CDROMCLOSETRAY		0x5319	/* pendant of CDROMEJECT */
-#define CDROM_SET_OPTIONS	0x5320  /* Set behavior options */
-#define CDROM_CLEAR_OPTIONS	0x5321  /* Clear behavior options */
-#define CDROM_SELECT_SPEED	0x5322  /* Set the CD-ROM speed */
-#define CDROM_SELECT_DISC	0x5323  /* Select disc (for juke-boxes) */
-#define CDROM_MEDIA_CHANGED	0x5325  /* Check is media changed  */
-#define CDROM_DRIVE_STATUS	0x5326  /* Get tray position, etc. */
-#define CDROM_DISC_STATUS	0x5327  /* Get disc type, etc. */
-#define CDROM_CHANGER_NSLOTS    0x5328  /* Get number of slots */
-#define CDROM_LOCKDOOR		0x5329  /* lock or unlock door */
-#define CDROM_DEBUG		0x5330	/* Turn debug messages on/off */
-#define CDROM_GET_CAPABILITY	0x5331	/* get capabilities */
-
-/* Note that scsi/scsi_ioctl.h also uses 0x5382 - 0x5386.
- * Future CDROM ioctls should be kept below 0x537F
- */
-
-/* This ioctl is only used by sbpcd at the moment */
-#define CDROMAUDIOBUFSIZ        0x5382	/* set the audio buffer size */
-					/* conflict with SCSI_IOCTL_GET_IDLUN */
-
-/* DVD-ROM Specific ioctls */
-#define DVD_READ_STRUCT		0x5390  /* Read structure */
-#define DVD_WRITE_STRUCT	0x5391  /* Write structure */
-#define DVD_AUTH		0x5392  /* Authentication */
-
-#define CDROM_SEND_PACKET	0x5393	/* send a packet to the drive */
-#define CDROM_NEXT_WRITABLE	0x5394	/* get next writable block */
-#define CDROM_LAST_WRITTEN	0x5395	/* get last block written on disc */
-
-/*******************************************************
- * CDROM IOCTL structures
- *******************************************************/
-
-/* Address in MSF format */
-struct cdrom_msf0		
-{
-	__u8	minute;
-	__u8	second;
-	__u8	frame;
-};
-
-/* Address in either MSF or logical format */
-union cdrom_addr		
-{
-	struct cdrom_msf0	msf;
-	int			lba;
-};
-
-/* This struct is used by the CDROMPLAYMSF ioctl */ 
-struct cdrom_msf 
-{
-	__u8	cdmsf_min0;	/* start minute */
-	__u8	cdmsf_sec0;	/* start second */
-	__u8	cdmsf_frame0;	/* start frame */
-	__u8	cdmsf_min1;	/* end minute */
-	__u8	cdmsf_sec1;	/* end second */
-	__u8	cdmsf_frame1;	/* end frame */
-};
-
-/* This struct is used by the CDROMPLAYTRKIND ioctl */
-struct cdrom_ti 
-{
-	__u8	cdti_trk0;	/* start track */
-	__u8	cdti_ind0;	/* start index */
-	__u8	cdti_trk1;	/* end track */
-	__u8	cdti_ind1;	/* end index */
-};
-
-/* This struct is used by the CDROMREADTOCHDR ioctl */
-struct cdrom_tochdr 	
-{
-	__u8	cdth_trk0;	/* start track */
-	__u8	cdth_trk1;	/* end track */
-};
-
-/* This struct is used by the CDROMVOLCTRL and CDROMVOLREAD ioctls */
-struct cdrom_volctrl
-{
-	__u8	channel0;
-	__u8	channel1;
-	__u8	channel2;
-	__u8	channel3;
-};
-
-/* This struct is used by the CDROMSUBCHNL ioctl */
-struct cdrom_subchnl 
-{
-	__u8	cdsc_format;
-	__u8	cdsc_audiostatus;
-	__u8	cdsc_adr:	4;
-	__u8	cdsc_ctrl:	4;
-	__u8	cdsc_trk;
-	__u8	cdsc_ind;
-	union cdrom_addr cdsc_absaddr;
-	union cdrom_addr cdsc_reladdr;
-};
-
-
-/* This struct is used by the CDROMREADTOCENTRY ioctl */
-struct cdrom_tocentry 
-{
-	__u8	cdte_track;
-	__u8	cdte_adr	:4;
-	__u8	cdte_ctrl	:4;
-	__u8	cdte_format;
-	union cdrom_addr cdte_addr;
-	__u8	cdte_datamode;
-};
-
-/* This struct is used by the CDROMREADMODE1, and CDROMREADMODE2 ioctls */
-struct cdrom_read      
-{
-	int	cdread_lba;
-	char 	*cdread_bufaddr;
-	int	cdread_buflen;
-};
-
-/* This struct is used by the CDROMREADAUDIO ioctl */
-struct cdrom_read_audio
-{
-	union cdrom_addr addr; /* frame address */
-	__u8 addr_format;      /* CDROM_LBA or CDROM_MSF */
-	int nframes;           /* number of 2352-byte-frames to read at once */
-	__u8 __user *buf;      /* frame buffer (size: nframes*2352 bytes) */
-};
-
-/* This struct is used with the CDROMMULTISESSION ioctl */
-struct cdrom_multisession
-{
-	union cdrom_addr addr; /* frame address: start-of-last-session 
-	                           (not the new "frame 16"!).  Only valid
-	                           if the "xa_flag" is true. */
-	__u8 xa_flag;        /* 1: "is XA disk" */
-	__u8 addr_format;    /* CDROM_LBA or CDROM_MSF */
-};
-
-/* This struct is used with the CDROM_GET_MCN ioctl.  
- * Very few audio discs actually have Universal Product Code information, 
- * which should just be the Medium Catalog Number on the box.  Also note 
- * that the way the codeis written on CD is _not_ uniform across all discs!
- */  
-struct cdrom_mcn 
-{
-  __u8 medium_catalog_number[14]; /* 13 ASCII digits, null-terminated */
-};
-
-/* This is used by the CDROMPLAYBLK ioctl */
-struct cdrom_blk 
-{
-	unsigned from;
-	unsigned short len;
-};
-
-#define CDROM_PACKET_SIZE	12
-
-#define CGC_DATA_UNKNOWN	0
-#define CGC_DATA_WRITE		1
-#define CGC_DATA_READ		2
-#define CGC_DATA_NONE		3
-
-/* for CDROM_PACKET_COMMAND ioctl */
-struct cdrom_generic_command
-{
-	unsigned char 		cmd[CDROM_PACKET_SIZE];
-	unsigned char		__user *buffer;
-	unsigned int 		buflen;
-	int			stat;
-	struct request_sense	__user *sense;
-	unsigned char		data_direction;
-	int			quiet;
-	int			timeout;
-	void			__user *reserved[1];	/* unused, actually */
-};
-
-/*
- * A CD-ROM physical sector size is 2048, 2052, 2056, 2324, 2332, 2336, 
- * 2340, or 2352 bytes long.  
-
-*         Sector types of the standard CD-ROM data formats:
- *
- * format   sector type               user data size (bytes)
- * -----------------------------------------------------------------------------
- *   1     (Red Book)    CD-DA          2352    (CD_FRAMESIZE_RAW)
- *   2     (Yellow Book) Mode1 Form1    2048    (CD_FRAMESIZE)
- *   3     (Yellow Book) Mode1 Form2    2336    (CD_FRAMESIZE_RAW0)
- *   4     (Green Book)  Mode2 Form1    2048    (CD_FRAMESIZE)
- *   5     (Green Book)  Mode2 Form2    2328    (2324+4 spare bytes)
- *
- *
- *       The layout of the standard CD-ROM data formats:
- * -----------------------------------------------------------------------------
- * - audio (red):                  | audio_sample_bytes |
- *                                 |        2352        |
- *
- * - data (yellow, mode1):         | sync - head - data - EDC - zero - ECC |
- *                                 |  12  -   4  - 2048 -  4  -   8  - 276 |
- *
- * - data (yellow, mode2):         | sync - head - data |
- *                                 |  12  -   4  - 2336 |
- *
- * - XA data (green, mode2 form1): | sync - head - sub - data - EDC - ECC |
- *                                 |  12  -   4  -  8  - 2048 -  4  - 276 |
- *
- * - XA data (green, mode2 form2): | sync - head - sub - data - Spare |
- *                                 |  12  -   4  -  8  - 2324 -  4    |
- *
- */
-
-/* Some generally useful CD-ROM information -- mostly based on the above */
-#define CD_MINS              74 /* max. minutes per CD, not really a limit */
-#define CD_SECS              60 /* seconds per minute */
-#define CD_FRAMES            75 /* frames per second */
-#define CD_SYNC_SIZE         12 /* 12 sync bytes per raw data frame */
-#define CD_MSF_OFFSET       150 /* MSF numbering offset of first frame */
-#define CD_CHUNK_SIZE        24 /* lowest-level "data bytes piece" */
-#define CD_NUM_OF_CHUNKS     98 /* chunks per frame */
-#define CD_FRAMESIZE_SUB     96 /* subchannel data "frame" size */
-#define CD_HEAD_SIZE          4 /* header (address) bytes per raw data frame */
-#define CD_SUBHEAD_SIZE       8 /* subheader bytes per raw XA data frame */
-#define CD_EDC_SIZE           4 /* bytes EDC per most raw data frame types */
-#define CD_ZERO_SIZE          8 /* bytes zero per yellow book mode 1 frame */
-#define CD_ECC_SIZE         276 /* bytes ECC per most raw data frame types */
-#define CD_FRAMESIZE       2048 /* bytes per frame, "cooked" mode */
-#define CD_FRAMESIZE_RAW   2352 /* bytes per frame, "raw" mode */
-#define CD_FRAMESIZE_RAWER 2646 /* The maximum possible returned bytes */ 
-/* most drives don't deliver everything: */
-#define CD_FRAMESIZE_RAW1 (CD_FRAMESIZE_RAW-CD_SYNC_SIZE) /*2340*/
-#define CD_FRAMESIZE_RAW0 (CD_FRAMESIZE_RAW-CD_SYNC_SIZE-CD_HEAD_SIZE) /*2336*/
-
-#define CD_XA_HEAD        (CD_HEAD_SIZE+CD_SUBHEAD_SIZE) /* "before data" part of raw XA frame */
-#define CD_XA_TAIL        (CD_EDC_SIZE+CD_ECC_SIZE) /* "after data" part of raw XA frame */
-#define CD_XA_SYNC_HEAD   (CD_SYNC_SIZE+CD_XA_HEAD) /* sync bytes + header of XA frame */
-
-/* CD-ROM address types (cdrom_tocentry.cdte_format) */
-#define	CDROM_LBA 0x01 /* "logical block": first frame is #0 */
-#define	CDROM_MSF 0x02 /* "minute-second-frame": binary, not bcd here! */
-
-/* bit to tell whether track is data or audio (cdrom_tocentry.cdte_ctrl) */
-#define	CDROM_DATA_TRACK	0x04
-
-/* The leadout track is always 0xAA, regardless of # of tracks on disc */
-#define	CDROM_LEADOUT		0xAA
-
-/* audio states (from SCSI-2, but seen with other drives, too) */
-#define	CDROM_AUDIO_INVALID	0x00	/* audio status not supported */
-#define	CDROM_AUDIO_PLAY	0x11	/* audio play operation in progress */
-#define	CDROM_AUDIO_PAUSED	0x12	/* audio play operation paused */
-#define	CDROM_AUDIO_COMPLETED	0x13	/* audio play successfully completed */
-#define	CDROM_AUDIO_ERROR	0x14	/* audio play stopped due to error */
-#define	CDROM_AUDIO_NO_STATUS	0x15	/* no current audio status to return */
-
-/* capability flags used with the uniform CD-ROM driver */ 
-#define CDC_CLOSE_TRAY		0x1     /* caddy systems _can't_ close */
-#define CDC_OPEN_TRAY		0x2     /* but _can_ eject.  */
-#define CDC_LOCK		0x4     /* disable manual eject */
-#define CDC_SELECT_SPEED 	0x8     /* programmable speed */
-#define CDC_SELECT_DISC		0x10    /* select disc from juke-box */
-#define CDC_MULTI_SESSION 	0x20    /* read sessions>1 */
-#define CDC_MCN			0x40    /* Medium Catalog Number */
-#define CDC_MEDIA_CHANGED 	0x80    /* media changed */
-#define CDC_PLAY_AUDIO		0x100   /* audio functions */
-#define CDC_RESET               0x200   /* hard reset device */
-#define CDC_DRIVE_STATUS        0x800   /* driver implements drive status */
-#define CDC_GENERIC_PACKET	0x1000	/* driver implements generic packets */
-#define CDC_CD_R		0x2000	/* drive is a CD-R */
-#define CDC_CD_RW		0x4000	/* drive is a CD-RW */
-#define CDC_DVD			0x8000	/* drive is a DVD */
-#define CDC_DVD_R		0x10000	/* drive can write DVD-R */
-#define CDC_DVD_RAM		0x20000	/* drive can write DVD-RAM */
-#define CDC_MO_DRIVE		0x40000 /* drive is an MO device */
-#define CDC_MRW			0x80000 /* drive can read MRW */
-#define CDC_MRW_W		0x100000 /* drive can write MRW */
-#define CDC_RAM			0x200000 /* ok to open for WRITE */
-
-/* drive status possibilities returned by CDROM_DRIVE_STATUS ioctl */
-#define CDS_NO_INFO		0	/* if not implemented */
-#define CDS_NO_DISC		1
-#define CDS_TRAY_OPEN		2
-#define CDS_DRIVE_NOT_READY	3
-#define CDS_DISC_OK		4
-
-/* return values for the CDROM_DISC_STATUS ioctl */
-/* can also return CDS_NO_[INFO|DISC], from above */
-#define CDS_AUDIO		100
-#define CDS_DATA_1		101
-#define CDS_DATA_2		102
-#define CDS_XA_2_1		103
-#define CDS_XA_2_2		104
-#define CDS_MIXED		105
-
-/* User-configurable behavior options for the uniform CD-ROM driver */
-#define CDO_AUTO_CLOSE		0x1     /* close tray on first open() */
-#define CDO_AUTO_EJECT		0x2     /* open tray on last release() */
-#define CDO_USE_FFLAGS		0x4     /* use O_NONBLOCK information on open */
-#define CDO_LOCK		0x8     /* lock tray on open files */
-#define CDO_CHECK_TYPE		0x10    /* check type on open for data */
-
-/* Special codes used when specifying changer slots. */
-#define CDSL_NONE       	(INT_MAX-1)
-#define CDSL_CURRENT    	INT_MAX
-
-/* For partition based multisession access. IDE can handle 64 partitions
- * per drive - SCSI CD-ROM's use minors to differentiate between the
- * various drives, so we can't do multisessions the same way there.
- * Use the -o session=x option to mount on them.
- */
-#define CD_PART_MAX		64
-#define CD_PART_MASK		(CD_PART_MAX - 1)
-
-/*********************************************************************
- * Generic Packet commands, MMC commands, and such
- *********************************************************************/
-
- /* The generic packet command opcodes for CD/DVD Logical Units,
- * From Table 57 of the SFF8090 Ver. 3 (Mt. Fuji) draft standard. */
-#define GPCMD_BLANK			    0xa1
-#define GPCMD_CLOSE_TRACK		    0x5b
-#define GPCMD_FLUSH_CACHE		    0x35
-#define GPCMD_FORMAT_UNIT		    0x04
-#define GPCMD_GET_CONFIGURATION		    0x46
-#define GPCMD_GET_EVENT_STATUS_NOTIFICATION 0x4a
-#define GPCMD_GET_PERFORMANCE		    0xac
-#define GPCMD_INQUIRY			    0x12
-#define GPCMD_LOAD_UNLOAD		    0xa6
-#define GPCMD_MECHANISM_STATUS		    0xbd
-#define GPCMD_MODE_SELECT_10		    0x55
-#define GPCMD_MODE_SENSE_10		    0x5a
-#define GPCMD_PAUSE_RESUME		    0x4b
-#define GPCMD_PLAY_AUDIO_10		    0x45
-#define GPCMD_PLAY_AUDIO_MSF		    0x47
-#define GPCMD_PLAY_AUDIO_TI		    0x48
-#define GPCMD_PLAY_CD			    0xbc
-#define GPCMD_PREVENT_ALLOW_MEDIUM_REMOVAL  0x1e
-#define GPCMD_READ_10			    0x28
-#define GPCMD_READ_12			    0xa8
-#define GPCMD_READ_BUFFER		    0x3c
-#define GPCMD_READ_BUFFER_CAPACITY	    0x5c
-#define GPCMD_READ_CDVD_CAPACITY	    0x25
-#define GPCMD_READ_CD			    0xbe
-#define GPCMD_READ_CD_MSF		    0xb9
-#define GPCMD_READ_DISC_INFO		    0x51
-#define GPCMD_READ_DVD_STRUCTURE	    0xad
-#define GPCMD_READ_FORMAT_CAPACITIES	    0x23
-#define GPCMD_READ_HEADER		    0x44
-#define GPCMD_READ_TRACK_RZONE_INFO	    0x52
-#define GPCMD_READ_SUBCHANNEL		    0x42
-#define GPCMD_READ_TOC_PMA_ATIP		    0x43
-#define GPCMD_REPAIR_RZONE_TRACK	    0x58
-#define GPCMD_REPORT_KEY		    0xa4
-#define GPCMD_REQUEST_SENSE		    0x03
-#define GPCMD_RESERVE_RZONE_TRACK	    0x53
-#define GPCMD_SEND_CUE_SHEET		    0x5d
-#define GPCMD_SCAN			    0xba
-#define GPCMD_SEEK			    0x2b
-#define GPCMD_SEND_DVD_STRUCTURE	    0xbf
-#define GPCMD_SEND_EVENT		    0xa2
-#define GPCMD_SEND_KEY			    0xa3
-#define GPCMD_SEND_OPC			    0x54
-#define GPCMD_SET_READ_AHEAD		    0xa7
-#define GPCMD_SET_STREAMING		    0xb6
-#define GPCMD_START_STOP_UNIT		    0x1b
-#define GPCMD_STOP_PLAY_SCAN		    0x4e
-#define GPCMD_TEST_UNIT_READY		    0x00
-#define GPCMD_VERIFY_10			    0x2f
-#define GPCMD_WRITE_10			    0x2a
-#define GPCMD_WRITE_12			    0xaa
-#define GPCMD_WRITE_AND_VERIFY_10	    0x2e
-#define GPCMD_WRITE_BUFFER		    0x3b
-/* This is listed as optional in ATAPI 2.6, but is (curiously) 
- * missing from Mt. Fuji, Table 57.  It _is_ mentioned in Mt. Fuji
- * Table 377 as an MMC command for SCSi devices though...  Most ATAPI
- * drives support it. */
-#define GPCMD_SET_SPEED			    0xbb
-/* This seems to be a SCSI specific CD-ROM opcode 
- * to play data at track/index */
-#define GPCMD_PLAYAUDIO_TI		    0x48
-/*
- * From MS Media Status Notification Support Specification. For
- * older drives only.
- */
-#define GPCMD_GET_MEDIA_STATUS		    0xda
-
-/* Mode page codes for mode sense/set */
-#define GPMODE_VENDOR_PAGE		0x00
-#define GPMODE_R_W_ERROR_PAGE		0x01
-#define GPMODE_WRITE_PARMS_PAGE		0x05
-#define GPMODE_WCACHING_PAGE		0x08
-#define GPMODE_AUDIO_CTL_PAGE		0x0e
-#define GPMODE_POWER_PAGE		0x1a
-#define GPMODE_FAULT_FAIL_PAGE		0x1c
-#define GPMODE_TO_PROTECT_PAGE		0x1d
-#define GPMODE_CAPABILITIES_PAGE	0x2a
-#define GPMODE_ALL_PAGES		0x3f
-/* Not in Mt. Fuji, but in ATAPI 2.6 -- deprecated now in favor
- * of MODE_SENSE_POWER_PAGE */
-#define GPMODE_CDROM_PAGE		0x0d
-
-
-
-/* DVD struct types */
-#define DVD_STRUCT_PHYSICAL	0x00
-#define DVD_STRUCT_COPYRIGHT	0x01
-#define DVD_STRUCT_DISCKEY	0x02
-#define DVD_STRUCT_BCA		0x03
-#define DVD_STRUCT_MANUFACT	0x04
-
-struct dvd_layer {
-	__u8 book_version	: 4;
-	__u8 book_type		: 4;
-	__u8 min_rate		: 4;
-	__u8 disc_size		: 4;
-	__u8 layer_type		: 4;
-	__u8 track_path		: 1;
-	__u8 nlayers		: 2;
-	__u8 track_density	: 4;
-	__u8 linear_density	: 4;
-	__u8 bca		: 1;
-	__u32 start_sector;
-	__u32 end_sector;
-	__u32 end_sector_l0;
-};
-
-#define DVD_LAYERS	4
-
-struct dvd_physical {
-	__u8 type;
-	__u8 layer_num;
-	struct dvd_layer layer[DVD_LAYERS];
-};
-
-struct dvd_copyright {
-	__u8 type;
-
-	__u8 layer_num;
-	__u8 cpst;
-	__u8 rmi;
-};
-
-struct dvd_disckey {
-	__u8 type;
-
-	unsigned agid		: 2;
-	__u8 value[2048];
-};
-
-struct dvd_bca {
-	__u8 type;
-
-	int len;
-	__u8 value[188];
-};
-
-struct dvd_manufact {
-	__u8 type;
-
-	__u8 layer_num;
-	int len;
-	__u8 value[2048];
-};
-
-typedef union {
-	__u8 type;
-
-	struct dvd_physical	physical;
-	struct dvd_copyright	copyright;
-	struct dvd_disckey	disckey;
-	struct dvd_bca		bca;
-	struct dvd_manufact	manufact;
-} dvd_struct;
-
-/*
- * DVD authentication ioctl
- */
-
-/* Authentication states */
-#define DVD_LU_SEND_AGID	0
-#define DVD_HOST_SEND_CHALLENGE	1
-#define DVD_LU_SEND_KEY1	2
-#define DVD_LU_SEND_CHALLENGE	3
-#define DVD_HOST_SEND_KEY2	4
-
-/* Termination states */
-#define DVD_AUTH_ESTABLISHED	5
-#define DVD_AUTH_FAILURE	6
-
-/* Other functions */
-#define DVD_LU_SEND_TITLE_KEY	7
-#define DVD_LU_SEND_ASF		8
-#define DVD_INVALIDATE_AGID	9
-#define DVD_LU_SEND_RPC_STATE	10
-#define DVD_HOST_SEND_RPC_STATE	11
-
-/* State data */
-typedef __u8 dvd_key[5];		/* 40-bit value, MSB is first elem. */
-typedef __u8 dvd_challenge[10];	/* 80-bit value, MSB is first elem. */
-
-struct dvd_lu_send_agid {
-	__u8 type;
-	unsigned agid		: 2;
-};
-
-struct dvd_host_send_challenge {
-	__u8 type;
-	unsigned agid		: 2;
-
-	dvd_challenge chal;
-};
-
-struct dvd_send_key {
-	__u8 type;
-	unsigned agid		: 2;
-
-	dvd_key key;
-};
-
-struct dvd_lu_send_challenge {
-	__u8 type;
-	unsigned agid		: 2;
-
-	dvd_challenge chal;
-};
-
-#define DVD_CPM_NO_COPYRIGHT	0
-#define DVD_CPM_COPYRIGHTED	1
-
-#define DVD_CP_SEC_NONE		0
-#define DVD_CP_SEC_EXIST	1
-
-#define DVD_CGMS_UNRESTRICTED	0
-#define DVD_CGMS_SINGLE		2
-#define DVD_CGMS_RESTRICTED	3
-
-struct dvd_lu_send_title_key {
-	__u8 type;
-	unsigned agid		: 2;
-
-	dvd_key title_key;
-	int lba;
-	unsigned cpm		: 1;
-	unsigned cp_sec		: 1;
-	unsigned cgms		: 2;
-};
-
-struct dvd_lu_send_asf {
-	__u8 type;
-	unsigned agid		: 2;
-
-	unsigned asf		: 1;
-};
-
-struct dvd_host_send_rpcstate {
-	__u8 type;
-	__u8 pdrc;
-};
-
-struct dvd_lu_send_rpcstate {
-	__u8 type		: 2;
-	__u8 vra		: 3;
-	__u8 ucca		: 3;
-	__u8 region_mask;
-	__u8 rpc_scheme;
-};
-
-typedef union {
-	__u8 type;
-
-	struct dvd_lu_send_agid		lsa;
-	struct dvd_host_send_challenge	hsc;
-	struct dvd_send_key		lsk;
-	struct dvd_lu_send_challenge	lsc;
-	struct dvd_send_key		hsk;
-	struct dvd_lu_send_title_key	lstk;
-	struct dvd_lu_send_asf		lsasf;
-	struct dvd_host_send_rpcstate	hrpcs;
-	struct dvd_lu_send_rpcstate	lrpcs;
-} dvd_authinfo;
-
-struct request_sense {
-#if defined(__BIG_ENDIAN_BITFIELD)
-	__u8 valid		: 1;
-	__u8 error_code		: 7;
-#elif defined(__LITTLE_ENDIAN_BITFIELD)
-	__u8 error_code		: 7;
-	__u8 valid		: 1;
-#endif
-	__u8 segment_number;
-#if defined(__BIG_ENDIAN_BITFIELD)
-	__u8 reserved1		: 2;
-	__u8 ili		: 1;
-	__u8 reserved2		: 1;
-	__u8 sense_key		: 4;
-#elif defined(__LITTLE_ENDIAN_BITFIELD)
-	__u8 sense_key		: 4;
-	__u8 reserved2		: 1;
-	__u8 ili		: 1;
-	__u8 reserved1		: 2;
-#endif
-	__u8 information[4];
-	__u8 add_sense_len;
-	__u8 command_info[4];
-	__u8 asc;
-	__u8 ascq;
-	__u8 fruc;
-	__u8 sks[3];
-	__u8 asb[46];
-};
-
-/*
- * feature profile
- */
-#define CDF_RWRT	0x0020	/* "Random Writable" */
-#define CDF_HWDM	0x0024	/* "Hardware Defect Management" */
-#define CDF_MRW 	0x0028
-
-/*
- * media status bits
- */
-#define CDM_MRW_NOTMRW			0
-#define CDM_MRW_BGFORMAT_INACTIVE	1
-#define CDM_MRW_BGFORMAT_ACTIVE		2
-#define CDM_MRW_BGFORMAT_COMPLETE	3
-
-/*
- * mrw address spaces
- */
-#define MRW_LBA_DMA			0
-#define MRW_LBA_GAA			1
-
-/*
- * mrw mode pages (first is deprecated) -- probed at init time and
- * cdi->mrw_mode_page is set
- */
-#define MRW_MODE_PC_PRE1		0x2c
-#define MRW_MODE_PC			0x03
-
-struct mrw_feature_desc {
-	__be16 feature_code;
-#if defined(__BIG_ENDIAN_BITFIELD)
-	__u8 reserved1		: 2;
-	__u8 feature_version	: 4;
-	__u8 persistent		: 1;
-	__u8 curr		: 1;
-#elif defined(__LITTLE_ENDIAN_BITFIELD)
-	__u8 curr		: 1;
-	__u8 persistent		: 1;
-	__u8 feature_version	: 4;
-	__u8 reserved1		: 2;
-#endif
-	__u8 add_len;
-#if defined(__BIG_ENDIAN_BITFIELD)
-	__u8 reserved2		: 7;
-	__u8 write		: 1;
-#elif defined(__LITTLE_ENDIAN_BITFIELD)
-	__u8 write		: 1;
-	__u8 reserved2		: 7;
-#endif
-	__u8 reserved3;
-	__u8 reserved4;
-	__u8 reserved5;
-};
-
-/* cf. mmc4r02g.pdf 5.3.10 Random Writable Feature (0020h) pg 197 of 635 */
-struct rwrt_feature_desc {
-	__be16 feature_code;
-#if defined(__BIG_ENDIAN_BITFIELD)
-	__u8 reserved1		: 2;
-	__u8 feature_version	: 4;
-	__u8 persistent		: 1;
-	__u8 curr		: 1;
-#elif defined(__LITTLE_ENDIAN_BITFIELD)
-	__u8 curr		: 1;
-	__u8 persistent		: 1;
-	__u8 feature_version	: 4;
-	__u8 reserved1		: 2;
-#endif
-	__u8 add_len;
-	__u32 last_lba;
-	__u32 block_size;
-	__u16 blocking;
-#if defined(__BIG_ENDIAN_BITFIELD)
-	__u8 reserved2		: 7;
-	__u8 page_present	: 1;
-#elif defined(__LITTLE_ENDIAN_BITFIELD)
-	__u8 page_present	: 1;
-	__u8 reserved2		: 7;
-#endif
-	__u8 reserved3;
-};
-
-typedef struct {
-	__be16 disc_information_length;
-#if defined(__BIG_ENDIAN_BITFIELD)
-	__u8 reserved1			: 3;
-        __u8 erasable			: 1;
-        __u8 border_status		: 2;
-        __u8 disc_status		: 2;
-#elif defined(__LITTLE_ENDIAN_BITFIELD)
-        __u8 disc_status		: 2;
-        __u8 border_status		: 2;
-        __u8 erasable			: 1;
-	__u8 reserved1			: 3;
-#else
-#error "Please fix <asm/byteorder.h>"
-#endif
-	__u8 n_first_track;
-	__u8 n_sessions_lsb;
-	__u8 first_track_lsb;
-	__u8 last_track_lsb;
-#if defined(__BIG_ENDIAN_BITFIELD)
-	__u8 did_v			: 1;
-        __u8 dbc_v			: 1;
-        __u8 uru			: 1;
-        __u8 reserved2			: 2;
-	__u8 dbit			: 1;
-	__u8 mrw_status			: 2;
-#elif defined(__LITTLE_ENDIAN_BITFIELD)
-	__u8 mrw_status			: 2;
-	__u8 dbit			: 1;
-        __u8 reserved2			: 2;
-        __u8 uru			: 1;
-        __u8 dbc_v			: 1;
-	__u8 did_v			: 1;
-#endif
-	__u8 disc_type;
-	__u8 n_sessions_msb;
-	__u8 first_track_msb;
-	__u8 last_track_msb;
-	__u32 disc_id;
-	__u32 lead_in;
-	__u32 lead_out;
-	__u8 disc_bar_code[8];
-	__u8 reserved3;
-	__u8 n_opc;
-} disc_information;
-
-typedef struct {
-	__be16 track_information_length;
-	__u8 track_lsb;
-	__u8 session_lsb;
-	__u8 reserved1;
-#if defined(__BIG_ENDIAN_BITFIELD)
-	__u8 reserved2			: 2;
-        __u8 damage			: 1;
-        __u8 copy			: 1;
-        __u8 track_mode			: 4;
-	__u8 rt				: 1;
-	__u8 blank			: 1;
-	__u8 packet			: 1;
-	__u8 fp				: 1;
-	__u8 data_mode			: 4;
-	__u8 reserved3			: 6;
-	__u8 lra_v			: 1;
-	__u8 nwa_v			: 1;
-#elif defined(__LITTLE_ENDIAN_BITFIELD)
-        __u8 track_mode			: 4;
-        __u8 copy			: 1;
-        __u8 damage			: 1;
-	__u8 reserved2			: 2;
-	__u8 data_mode			: 4;
-	__u8 fp				: 1;
-	__u8 packet			: 1;
-	__u8 blank			: 1;
-	__u8 rt				: 1;
-	__u8 nwa_v			: 1;
-	__u8 lra_v			: 1;
-	__u8 reserved3			: 6;
-#endif
-	__be32 track_start;
-	__be32 next_writable;
-	__be32 free_blocks;
-	__be32 fixed_packet_size;
-	__be32 track_size;
-	__be32 last_rec_address;
-} track_information;
-
-struct feature_header {
-	__u32 data_len;
-	__u8 reserved1;
-	__u8 reserved2;
-	__u16 curr_profile;
-};
-
-struct mode_page_header {
-	__be16 mode_data_length;
-	__u8 medium_type;
-	__u8 reserved1;
-	__u8 reserved2;
-	__u8 reserved3;
-	__be16 desc_length;
-};
-
-#ifdef __KERNEL__
-#include <linux/fs.h>		/* not really needed, later.. */
-#include <linux/list.h>
-
-struct packet_command
-{
-	unsigned char 		cmd[CDROM_PACKET_SIZE];
-	unsigned char 		*buffer;
-	unsigned int 		buflen;
-	int			stat;
-	struct request_sense	*sense;
-	unsigned char		data_direction;
-	int			quiet;
-	int			timeout;
-	void			*reserved[1];
-};
-
-/*
- * _OLD will use PIO transfer on atapi devices, _BPC_* will use DMA
- */
-#define CDDA_OLD		0	/* old style */
-#define CDDA_BPC_SINGLE		1	/* single frame block pc */
-#define CDDA_BPC_FULL		2	/* multi frame block pc */
-
-/* Uniform cdrom data structures for cdrom.c */
-struct cdrom_device_info {
-	struct cdrom_device_ops  *ops;  /* link to device_ops */
-	struct list_head list;		/* linked list of all device_info */
-	struct gendisk *disk;		/* matching block layer disk */
-	void *handle;		        /* driver-dependent data */
-/* specifications */
-	int mask;                       /* mask of capability: disables them */
-	int speed;			/* maximum speed for reading data */
-	int capacity;			/* number of discs in jukebox */
-/* device-related storage */
-	unsigned int options	: 30;	/* options flags */
-	unsigned mc_flags	: 2;	/* media change buffer flags */
-	unsigned int vfs_events;	/* cached events for vfs path */
-	unsigned int ioctl_events;	/* cached events for ioctl path */
-    	int use_count;                  /* number of times device opened */
-    	char name[20];                  /* name of the device type */
-/* per-device flags */
-        __u8 sanyo_slot		: 2;	/* Sanyo 3 CD changer support */
-        __u8 keeplocked		: 1;	/* CDROM_LOCKDOOR status */
-        __u8 reserved		: 5;	/* not used yet */
-	int cdda_method;		/* see flags */
-	__u8 last_sense;
-	__u8 media_written;		/* dirty flag, DVD+RW bookkeeping */
-	unsigned short mmc3_profile;	/* current MMC3 profile */
-	int for_data;
-	int (*exit)(struct cdrom_device_info *);
-	int mrw_mode_page;
-};
-
-struct cdrom_device_ops {
-/* routines */
-	int (*open) (struct cdrom_device_info *, int);
-	void (*release) (struct cdrom_device_info *);
-	int (*drive_status) (struct cdrom_device_info *, int);
-	unsigned int (*check_events) (struct cdrom_device_info *cdi,
-				      unsigned int clearing, int slot);
-	int (*media_changed) (struct cdrom_device_info *, int);
-	int (*tray_move) (struct cdrom_device_info *, int);
-	int (*lock_door) (struct cdrom_device_info *, int);
-	int (*select_speed) (struct cdrom_device_info *, int);
-	int (*select_disc) (struct cdrom_device_info *, int);
-	int (*get_last_session) (struct cdrom_device_info *,
-				 struct cdrom_multisession *);
-	int (*get_mcn) (struct cdrom_device_info *,
-			struct cdrom_mcn *);
-	/* hard reset device */
-	int (*reset) (struct cdrom_device_info *);
-	/* play stuff */
-	int (*audio_ioctl) (struct cdrom_device_info *,unsigned int, void *);
-
-/* driver specifications */
-	const int capability;   /* capability flags */
-	int n_minors;           /* number of active minor devices */
-	/* handle uniform packets for scsi type devices (scsi,atapi) */
-	int (*generic_packet) (struct cdrom_device_info *,
-			       struct packet_command *);
-};
-
-/* the general block_device operations structure: */
-extern int cdrom_open(struct cdrom_device_info *cdi, struct block_device *bdev,
-			fmode_t mode);
-extern void cdrom_release(struct cdrom_device_info *cdi, fmode_t mode);
-extern int cdrom_ioctl(struct cdrom_device_info *cdi, struct block_device *bdev,
-		       fmode_t mode, unsigned int cmd, unsigned long arg);
-extern unsigned int cdrom_check_events(struct cdrom_device_info *cdi,
-				       unsigned int clearing);
-extern int cdrom_media_changed(struct cdrom_device_info *);
-
-extern int register_cdrom(struct cdrom_device_info *cdi);
-extern void unregister_cdrom(struct cdrom_device_info *cdi);
-
-typedef struct {
-    int data;
-    int audio;
-    int cdi;
-    int xa;
-    long error;
-} tracktype;
-
-extern int cdrom_get_last_written(struct cdrom_device_info *cdi, long *last_written);
-extern int cdrom_number_of_slots(struct cdrom_device_info *cdi);
-extern int cdrom_mode_select(struct cdrom_device_info *cdi,
-			     struct packet_command *cgc);
-extern int cdrom_mode_sense(struct cdrom_device_info *cdi,
-			    struct packet_command *cgc,
-			    int page_code, int page_control);
-extern void init_cdrom_command(struct packet_command *cgc,
-			       void *buffer, int len, int type);
-
-/* The SCSI spec says there could be 256 slots. */
-#define CDROM_MAX_SLOTS	256
-
-struct cdrom_mechstat_header {
-#if defined(__BIG_ENDIAN_BITFIELD)
-	__u8 fault         : 1;
-	__u8 changer_state : 2;
-	__u8 curslot       : 5;
-	__u8 mech_state    : 3;
-	__u8 door_open     : 1;
-	__u8 reserved1     : 4;
-#elif defined(__LITTLE_ENDIAN_BITFIELD)
-	__u8 curslot       : 5;
-	__u8 changer_state : 2;
-	__u8 fault         : 1;
-	__u8 reserved1     : 4;
-	__u8 door_open     : 1;
-	__u8 mech_state    : 3;
-#endif
-	__u8     curlba[3];
-	__u8     nslots;
-	__u16 slot_tablelen;
-};
-
-struct cdrom_slot {
-#if defined(__BIG_ENDIAN_BITFIELD)
-	__u8 disc_present : 1;
-	__u8 reserved1    : 6;
-	__u8 change       : 1;
-#elif defined(__LITTLE_ENDIAN_BITFIELD)
-	__u8 change       : 1;
-	__u8 reserved1    : 6;
-	__u8 disc_present : 1;
-#endif
-	__u8 reserved2[3];
-};
-
-struct cdrom_changer_info {
-	struct cdrom_mechstat_header hdr;
-	struct cdrom_slot slots[CDROM_MAX_SLOTS];
-};
-
-typedef enum {
-	mechtype_caddy = 0,
-	mechtype_tray  = 1,
-	mechtype_popup = 2,
-	mechtype_individual_changer = 4,
-	mechtype_cartridge_changer  = 5
-} mechtype_t;
-
-typedef struct {
-#if defined(__BIG_ENDIAN_BITFIELD)
-	__u8 ps			: 1;
-	__u8 reserved1		: 1;
-	__u8 page_code		: 6;
-        __u8 page_length;
-	__u8 reserved2		: 1;
-	__u8 bufe		: 1;
-	__u8 ls_v		: 1;
-	__u8 test_write		: 1;
-        __u8 write_type		: 4;
-	__u8 multi_session	: 2; /* or border, DVD */
-	__u8 fp			: 1;
-	__u8 copy		: 1;
-	__u8 track_mode		: 4;
-	__u8 reserved3		: 4;
-	__u8 data_block_type	: 4;
-#elif defined(__LITTLE_ENDIAN_BITFIELD)
-	__u8 page_code		: 6;
-	__u8 reserved1		: 1;
-	__u8 ps			: 1;
-        __u8 page_length;
-        __u8 write_type		: 4;
-	__u8 test_write		: 1;
-	__u8 ls_v		: 1;
-	__u8 bufe		: 1;
-	__u8 reserved2		: 1;
-	__u8 track_mode		: 4;
-	__u8 copy		: 1;
-	__u8 fp			: 1;
-	__u8 multi_session	: 2; /* or border, DVD */
-	__u8 data_block_type	: 4;
-	__u8 reserved3		: 4;
-#endif
-	__u8 link_size;
-	__u8 reserved4;
-#if defined(__BIG_ENDIAN_BITFIELD)
-	__u8 reserved5		: 2;
-	__u8 app_code		: 6;
-#elif defined(__LITTLE_ENDIAN_BITFIELD)
-	__u8 app_code		: 6;
-	__u8 reserved5		: 2;
-#endif
-	__u8 session_format;
-	__u8 reserved6;
-	__be32 packet_size;
-	__u16 audio_pause;
-	__u8 mcn[16];
-	__u8 isrc[16];
-	__u8 subhdr0;
-	__u8 subhdr1;
-	__u8 subhdr2;
-	__u8 subhdr3;
-} __attribute__((packed)) write_param_page;
-
-struct modesel_head
-{
-	__u8	reserved1;
-	__u8	medium;
-	__u8	reserved2;
-	__u8	block_desc_length;
-	__u8	density;
-	__u8	number_of_blocks_hi;
-	__u8	number_of_blocks_med;
-	__u8	number_of_blocks_lo;
-	__u8	reserved3;
-	__u8	block_length_hi;
-	__u8	block_length_med;
-	__u8	block_length_lo;
-};
-
-typedef struct {
-	__u16 report_key_length;
-	__u8 reserved1;
-	__u8 reserved2;
-#if defined(__BIG_ENDIAN_BITFIELD)
-	__u8 type_code			: 2;
-	__u8 vra			: 3;
-	__u8 ucca			: 3;
-#elif defined(__LITTLE_ENDIAN_BITFIELD)
-	__u8 ucca			: 3;
-	__u8 vra			: 3;
-	__u8 type_code			: 2;
-#endif
-	__u8 region_mask;
-	__u8 rpc_scheme;
-	__u8 reserved3;
-} rpc_state_t;
-
-struct event_header {
-	__be16 data_len;
-#if defined(__BIG_ENDIAN_BITFIELD)
-	__u8 nea		: 1;
-	__u8 reserved1		: 4;
-	__u8 notification_class	: 3;
-#elif defined(__LITTLE_ENDIAN_BITFIELD)
-	__u8 notification_class	: 3;
-	__u8 reserved1		: 4;
-	__u8 nea		: 1;
-#endif
-	__u8 supp_event_class;
-};
-
-struct media_event_desc {
-#if defined(__BIG_ENDIAN_BITFIELD)
-	__u8 reserved1		: 4;
-	__u8 media_event_code	: 4;
-	__u8 reserved2		: 6;
-	__u8 media_present	: 1;
-	__u8 door_open		: 1;
-#elif defined(__LITTLE_ENDIAN_BITFIELD)
-	__u8 media_event_code	: 4;
-	__u8 reserved1		: 4;
-	__u8 door_open		: 1;
-	__u8 media_present	: 1;
-	__u8 reserved2		: 6;
-#endif
-	__u8 start_slot;
-	__u8 end_slot;
-};
-
-extern int cdrom_get_media_event(struct cdrom_device_info *cdi, struct media_event_desc *med);
-
-static inline void lba_to_msf(int lba, u8 *m, u8 *s, u8 *f)
-{
-	lba += CD_MSF_OFFSET;
-	lba &= 0xffffff;  /* negative lbas use only 24 bits */
-	*m = lba / (CD_SECS * CD_FRAMES);
-	lba %= (CD_SECS * CD_FRAMES);
-	*s = lba / CD_FRAMES;
-	*f = lba % CD_FRAMES;
-}
-
-static inline int msf_to_lba(u8 m, u8 s, u8 f)
-{
-	return (((m * CD_SECS) + s) * CD_FRAMES + f) - CD_MSF_OFFSET;
-}
-#endif  /* End of kernel only stuff */ 
-
-#endif  /* _LINUX_CDROM_H */
diff --git a/ANDROID_3.4.5/include/linux/ceph/auth.h b/ANDROID_3.4.5/include/linux/ceph/auth.h
deleted file mode 100644
index aa13392a..00000000
--- a/ANDROID_3.4.5/include/linux/ceph/auth.h
+++ /dev/null
@@ -1,92 +0,0 @@
-#ifndef _FS_CEPH_AUTH_H
-#define _FS_CEPH_AUTH_H
-
-#include <linux/ceph/types.h>
-#include <linux/ceph/buffer.h>
-
-/*
- * Abstract interface for communicating with the authenticate module.
- * There is some handshake that takes place between us and the monitor
- * to acquire the necessary keys.  These are used to generate an
- * 'authorizer' that we use when connecting to a service (mds, osd).
- */
-
-struct ceph_auth_client;
-struct ceph_authorizer;
-
-struct ceph_auth_client_ops {
-	const char *name;
-
-	/*
-	 * true if we are authenticated and can connect to
-	 * services.
-	 */
-	int (*is_authenticated)(struct ceph_auth_client *ac);
-
-	/*
-	 * true if we should (re)authenticate, e.g., when our tickets
-	 * are getting old and crusty.
-	 */
-	int (*should_authenticate)(struct ceph_auth_client *ac);
-
-	/*
-	 * build requests and process replies during monitor
-	 * handshake.  if handle_reply returns -EAGAIN, we build
-	 * another request.
-	 */
-	int (*build_request)(struct ceph_auth_client *ac, void *buf, void *end);
-	int (*handle_reply)(struct ceph_auth_client *ac, int result,
-			    void *buf, void *end);
-
-	/*
-	 * Create authorizer for connecting to a service, and verify
-	 * the response to authenticate the service.
-	 */
-	int (*create_authorizer)(struct ceph_auth_client *ac, int peer_type,
-				 struct ceph_authorizer **a,
-				 void **buf, size_t *len,
-				 void **reply_buf, size_t *reply_len);
-	int (*verify_authorizer_reply)(struct ceph_auth_client *ac,
-				       struct ceph_authorizer *a, size_t len);
-	void (*destroy_authorizer)(struct ceph_auth_client *ac,
-				   struct ceph_authorizer *a);
-	void (*invalidate_authorizer)(struct ceph_auth_client *ac,
-				      int peer_type);
-
-	/* reset when we (re)connect to a monitor */
-	void (*reset)(struct ceph_auth_client *ac);
-
-	void (*destroy)(struct ceph_auth_client *ac);
-};
-
-struct ceph_auth_client {
-	u32 protocol;           /* CEPH_AUTH_* */
-	void *private;          /* for use by protocol implementation */
-	const struct ceph_auth_client_ops *ops;  /* null iff protocol==0 */
-
-	bool negotiating;       /* true if negotiating protocol */
-	const char *name;       /* entity name */
-	u64 global_id;          /* our unique id in system */
-	const struct ceph_crypto_key *key;     /* our secret key */
-	unsigned want_keys;     /* which services we want */
-};
-
-extern struct ceph_auth_client *ceph_auth_init(const char *name,
-					       const struct ceph_crypto_key *key);
-extern void ceph_auth_destroy(struct ceph_auth_client *ac);
-
-extern void ceph_auth_reset(struct ceph_auth_client *ac);
-
-extern int ceph_auth_build_hello(struct ceph_auth_client *ac,
-				 void *buf, size_t len);
-extern int ceph_handle_auth_reply(struct ceph_auth_client *ac,
-				  void *buf, size_t len,
-				  void *reply_buf, size_t reply_len);
-extern int ceph_entity_name_encode(const char *name, void **p, void *end);
-
-extern int ceph_build_auth(struct ceph_auth_client *ac,
-		    void *msg_buf, size_t msg_len);
-
-extern int ceph_auth_is_authenticated(struct ceph_auth_client *ac);
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/ceph/buffer.h b/ANDROID_3.4.5/include/linux/ceph/buffer.h
deleted file mode 100644
index 58d19014..00000000
--- a/ANDROID_3.4.5/include/linux/ceph/buffer.h
+++ /dev/null
@@ -1,39 +0,0 @@
-#ifndef __FS_CEPH_BUFFER_H
-#define __FS_CEPH_BUFFER_H
-
-#include <linux/kref.h>
-#include <linux/mm.h>
-#include <linux/vmalloc.h>
-#include <linux/types.h>
-#include <linux/uio.h>
-
-/*
- * a simple reference counted buffer.
- *
- * use kmalloc for small sizes (<= one page), vmalloc for larger
- * sizes.
- */
-struct ceph_buffer {
-	struct kref kref;
-	struct kvec vec;
-	size_t alloc_len;
-	bool is_vmalloc;
-};
-
-extern struct ceph_buffer *ceph_buffer_new(size_t len, gfp_t gfp);
-extern void ceph_buffer_release(struct kref *kref);
-
-static inline struct ceph_buffer *ceph_buffer_get(struct ceph_buffer *b)
-{
-	kref_get(&b->kref);
-	return b;
-}
-
-static inline void ceph_buffer_put(struct ceph_buffer *b)
-{
-	kref_put(&b->kref, ceph_buffer_release);
-}
-
-extern int ceph_decode_buffer(struct ceph_buffer **b, void **p, void *end);
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/ceph/ceph_debug.h b/ANDROID_3.4.5/include/linux/ceph/ceph_debug.h
deleted file mode 100644
index aa2e1918..00000000
--- a/ANDROID_3.4.5/include/linux/ceph/ceph_debug.h
+++ /dev/null
@@ -1,38 +0,0 @@
-#ifndef _FS_CEPH_DEBUG_H
-#define _FS_CEPH_DEBUG_H
-
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-#ifdef CONFIG_CEPH_LIB_PRETTYDEBUG
-
-/*
- * wrap pr_debug to include a filename:lineno prefix on each line.
- * this incurs some overhead (kernel size and execution time) due to
- * the extra function call at each call site.
- */
-
-# if defined(DEBUG) || defined(CONFIG_DYNAMIC_DEBUG)
-extern const char *ceph_file_part(const char *s, int len);
-#  define dout(fmt, ...)						\
-	pr_debug("%.*s %12.12s:%-4d : " fmt,				\
-		 8 - (int)sizeof(KBUILD_MODNAME), "    ",		\
-		 ceph_file_part(__FILE__, sizeof(__FILE__)),		\
-		 __LINE__, ##__VA_ARGS__)
-# else
-/* faux printk call just to see any compiler warnings. */
-#  define dout(fmt, ...)	do {				\
-		if (0)						\
-			printk(KERN_DEBUG fmt, ##__VA_ARGS__);	\
-	} while (0)
-# endif
-
-#else
-
-/*
- * or, just wrap pr_debug
- */
-# define dout(fmt, ...)	pr_debug(" " fmt, ##__VA_ARGS__)
-
-#endif
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/ceph/ceph_frag.h b/ANDROID_3.4.5/include/linux/ceph/ceph_frag.h
deleted file mode 100644
index 5babb8e9..00000000
--- a/ANDROID_3.4.5/include/linux/ceph/ceph_frag.h
+++ /dev/null
@@ -1,109 +0,0 @@
-#ifndef FS_CEPH_FRAG_H
-#define FS_CEPH_FRAG_H
-
-/*
- * "Frags" are a way to describe a subset of a 32-bit number space,
- * using a mask and a value to match against that mask.  Any given frag
- * (subset of the number space) can be partitioned into 2^n sub-frags.
- *
- * Frags are encoded into a 32-bit word:
- *   8 upper bits = "bits"
- *  24 lower bits = "value"
- * (We could go to 5+27 bits, but who cares.)
- *
- * We use the _most_ significant bits of the 24 bit value.  This makes
- * values logically sort.
- *
- * Unfortunately, because the "bits" field is still in the high bits, we
- * can't sort encoded frags numerically.  However, it does allow you
- * to feed encoded frags as values into frag_contains_value.
- */
-static inline __u32 ceph_frag_make(__u32 b, __u32 v)
-{
-	return (b << 24) |
-		(v & (0xffffffu << (24-b)) & 0xffffffu);
-}
-static inline __u32 ceph_frag_bits(__u32 f)
-{
-	return f >> 24;
-}
-static inline __u32 ceph_frag_value(__u32 f)
-{
-	return f & 0xffffffu;
-}
-static inline __u32 ceph_frag_mask(__u32 f)
-{
-	return (0xffffffu << (24-ceph_frag_bits(f))) & 0xffffffu;
-}
-static inline __u32 ceph_frag_mask_shift(__u32 f)
-{
-	return 24 - ceph_frag_bits(f);
-}
-
-static inline int ceph_frag_contains_value(__u32 f, __u32 v)
-{
-	return (v & ceph_frag_mask(f)) == ceph_frag_value(f);
-}
-static inline int ceph_frag_contains_frag(__u32 f, __u32 sub)
-{
-	/* is sub as specific as us, and contained by us? */
-	return ceph_frag_bits(sub) >= ceph_frag_bits(f) &&
-	       (ceph_frag_value(sub) & ceph_frag_mask(f)) == ceph_frag_value(f);
-}
-
-static inline __u32 ceph_frag_parent(__u32 f)
-{
-	return ceph_frag_make(ceph_frag_bits(f) - 1,
-			 ceph_frag_value(f) & (ceph_frag_mask(f) << 1));
-}
-static inline int ceph_frag_is_left_child(__u32 f)
-{
-	return ceph_frag_bits(f) > 0 &&
-		(ceph_frag_value(f) & (0x1000000 >> ceph_frag_bits(f))) == 0;
-}
-static inline int ceph_frag_is_right_child(__u32 f)
-{
-	return ceph_frag_bits(f) > 0 &&
-		(ceph_frag_value(f) & (0x1000000 >> ceph_frag_bits(f))) == 1;
-}
-static inline __u32 ceph_frag_sibling(__u32 f)
-{
-	return ceph_frag_make(ceph_frag_bits(f),
-		      ceph_frag_value(f) ^ (0x1000000 >> ceph_frag_bits(f)));
-}
-static inline __u32 ceph_frag_left_child(__u32 f)
-{
-	return ceph_frag_make(ceph_frag_bits(f)+1, ceph_frag_value(f));
-}
-static inline __u32 ceph_frag_right_child(__u32 f)
-{
-	return ceph_frag_make(ceph_frag_bits(f)+1,
-	      ceph_frag_value(f) | (0x1000000 >> (1+ceph_frag_bits(f))));
-}
-static inline __u32 ceph_frag_make_child(__u32 f, int by, int i)
-{
-	int newbits = ceph_frag_bits(f) + by;
-	return ceph_frag_make(newbits,
-			 ceph_frag_value(f) | (i << (24 - newbits)));
-}
-static inline int ceph_frag_is_leftmost(__u32 f)
-{
-	return ceph_frag_value(f) == 0;
-}
-static inline int ceph_frag_is_rightmost(__u32 f)
-{
-	return ceph_frag_value(f) == ceph_frag_mask(f);
-}
-static inline __u32 ceph_frag_next(__u32 f)
-{
-	return ceph_frag_make(ceph_frag_bits(f),
-			 ceph_frag_value(f) + (0x1000000 >> ceph_frag_bits(f)));
-}
-
-/*
- * comparator to sort frags logically, as when traversing the
- * number space in ascending order...
- */
-int ceph_frag_compare(__u32 a, __u32 b);
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/ceph/ceph_fs.h b/ANDROID_3.4.5/include/linux/ceph/ceph_fs.h
deleted file mode 100644
index b8c60694..00000000
--- a/ANDROID_3.4.5/include/linux/ceph/ceph_fs.h
+++ /dev/null
@@ -1,751 +0,0 @@
-/*
- * ceph_fs.h - Ceph constants and data types to share between kernel and
- * user space.
- *
- * Most types in this file are defined as little-endian, and are
- * primarily intended to describe data structures that pass over the
- * wire or that are stored on disk.
- *
- * LGPL2
- */
-
-#ifndef CEPH_FS_H
-#define CEPH_FS_H
-
-#include "msgr.h"
-#include "rados.h"
-
-/*
- * subprotocol versions.  when specific messages types or high-level
- * protocols change, bump the affected components.  we keep rev
- * internal cluster protocols separately from the public,
- * client-facing protocol.
- */
-#define CEPH_OSD_PROTOCOL     8 /* cluster internal */
-#define CEPH_MDS_PROTOCOL    12 /* cluster internal */
-#define CEPH_MON_PROTOCOL     5 /* cluster internal */
-#define CEPH_OSDC_PROTOCOL   24 /* server/client */
-#define CEPH_MDSC_PROTOCOL   32 /* server/client */
-#define CEPH_MONC_PROTOCOL   15 /* server/client */
-
-
-#define CEPH_INO_ROOT  1
-#define CEPH_INO_CEPH  2        /* hidden .ceph dir */
-
-/* arbitrary limit on max # of monitors (cluster of 3 is typical) */
-#define CEPH_MAX_MON   31
-
-
-/*
- * feature bits
- */
-#define CEPH_FEATURE_UID            (1<<0)
-#define CEPH_FEATURE_NOSRCADDR      (1<<1)
-#define CEPH_FEATURE_MONCLOCKCHECK  (1<<2)
-#define CEPH_FEATURE_FLOCK          (1<<3)
-#define CEPH_FEATURE_SUBSCRIBE2     (1<<4)
-#define CEPH_FEATURE_MONNAMES       (1<<5)
-#define CEPH_FEATURE_RECONNECT_SEQ  (1<<6)
-#define CEPH_FEATURE_DIRLAYOUTHASH  (1<<7)
-
-
-/*
- * ceph_file_layout - describe data layout for a file/inode
- */
-struct ceph_file_layout {
-	/* file -> object mapping */
-	__le32 fl_stripe_unit;     /* stripe unit, in bytes.  must be multiple
-				      of page size. */
-	__le32 fl_stripe_count;    /* over this many objects */
-	__le32 fl_object_size;     /* until objects are this big, then move to
-				      new objects */
-	__le32 fl_cas_hash;        /* UNUSED.  0 = none; 1 = sha256 */
-
-	/* pg -> disk layout */
-	__le32 fl_object_stripe_unit;  /* UNUSED.  for per-object parity, if any */
-
-	/* object -> pg layout */
-	__le32 fl_pg_preferred; /* preferred primary for pg (-1 for none) */
-	__le32 fl_pg_pool;      /* namespace, crush ruleset, rep level */
-} __attribute__ ((packed));
-
-#define CEPH_MIN_STRIPE_UNIT 65536
-
-int ceph_file_layout_is_valid(const struct ceph_file_layout *layout);
-
-struct ceph_dir_layout {
-	__u8   dl_dir_hash;   /* see ceph_hash.h for ids */
-	__u8   dl_unused1;
-	__u16  dl_unused2;
-	__u32  dl_unused3;
-} __attribute__ ((packed));
-
-/* crypto algorithms */
-#define CEPH_CRYPTO_NONE 0x0
-#define CEPH_CRYPTO_AES  0x1
-
-#define CEPH_AES_IV "cephsageyudagreg"
-
-/* security/authentication protocols */
-#define CEPH_AUTH_UNKNOWN	0x0
-#define CEPH_AUTH_NONE	 	0x1
-#define CEPH_AUTH_CEPHX	 	0x2
-
-#define CEPH_AUTH_UID_DEFAULT ((__u64) -1)
-
-
-/*********************************************
- * message layer
- */
-
-/*
- * message types
- */
-
-/* misc */
-#define CEPH_MSG_SHUTDOWN               1
-#define CEPH_MSG_PING                   2
-
-/* client <-> monitor */
-#define CEPH_MSG_MON_MAP                4
-#define CEPH_MSG_MON_GET_MAP            5
-#define CEPH_MSG_STATFS                 13
-#define CEPH_MSG_STATFS_REPLY           14
-#define CEPH_MSG_MON_SUBSCRIBE          15
-#define CEPH_MSG_MON_SUBSCRIBE_ACK      16
-#define CEPH_MSG_AUTH			17
-#define CEPH_MSG_AUTH_REPLY		18
-
-/* client <-> mds */
-#define CEPH_MSG_MDS_MAP                21
-
-#define CEPH_MSG_CLIENT_SESSION         22
-#define CEPH_MSG_CLIENT_RECONNECT       23
-
-#define CEPH_MSG_CLIENT_REQUEST         24
-#define CEPH_MSG_CLIENT_REQUEST_FORWARD 25
-#define CEPH_MSG_CLIENT_REPLY           26
-#define CEPH_MSG_CLIENT_CAPS            0x310
-#define CEPH_MSG_CLIENT_LEASE           0x311
-#define CEPH_MSG_CLIENT_SNAP            0x312
-#define CEPH_MSG_CLIENT_CAPRELEASE      0x313
-
-/* pool ops */
-#define CEPH_MSG_POOLOP_REPLY           48
-#define CEPH_MSG_POOLOP                 49
-
-
-/* osd */
-#define CEPH_MSG_OSD_MAP                41
-#define CEPH_MSG_OSD_OP                 42
-#define CEPH_MSG_OSD_OPREPLY            43
-#define CEPH_MSG_WATCH_NOTIFY           44
-
-
-/* watch-notify operations */
-enum {
-  WATCH_NOTIFY				= 1, /* notifying watcher */
-  WATCH_NOTIFY_COMPLETE			= 2, /* notifier notified when done */
-};
-
-
-/* pool operations */
-enum {
-  POOL_OP_CREATE			= 0x01,
-  POOL_OP_DELETE			= 0x02,
-  POOL_OP_AUID_CHANGE			= 0x03,
-  POOL_OP_CREATE_SNAP			= 0x11,
-  POOL_OP_DELETE_SNAP			= 0x12,
-  POOL_OP_CREATE_UNMANAGED_SNAP		= 0x21,
-  POOL_OP_DELETE_UNMANAGED_SNAP		= 0x22,
-};
-
-struct ceph_mon_request_header {
-	__le64 have_version;
-	__le16 session_mon;
-	__le64 session_mon_tid;
-} __attribute__ ((packed));
-
-struct ceph_mon_statfs {
-	struct ceph_mon_request_header monhdr;
-	struct ceph_fsid fsid;
-} __attribute__ ((packed));
-
-struct ceph_statfs {
-	__le64 kb, kb_used, kb_avail;
-	__le64 num_objects;
-} __attribute__ ((packed));
-
-struct ceph_mon_statfs_reply {
-	struct ceph_fsid fsid;
-	__le64 version;
-	struct ceph_statfs st;
-} __attribute__ ((packed));
-
-const char *ceph_pool_op_name(int op);
-
-struct ceph_mon_poolop {
-	struct ceph_mon_request_header monhdr;
-	struct ceph_fsid fsid;
-	__le32 pool;
-	__le32 op;
-	__le64 auid;
-	__le64 snapid;
-	__le32 name_len;
-} __attribute__ ((packed));
-
-struct ceph_mon_poolop_reply {
-	struct ceph_mon_request_header monhdr;
-	struct ceph_fsid fsid;
-	__le32 reply_code;
-	__le32 epoch;
-	char has_data;
-	char data[0];
-} __attribute__ ((packed));
-
-struct ceph_mon_unmanaged_snap {
-	__le64 snapid;
-} __attribute__ ((packed));
-
-struct ceph_osd_getmap {
-	struct ceph_mon_request_header monhdr;
-	struct ceph_fsid fsid;
-	__le32 start;
-} __attribute__ ((packed));
-
-struct ceph_mds_getmap {
-	struct ceph_mon_request_header monhdr;
-	struct ceph_fsid fsid;
-} __attribute__ ((packed));
-
-struct ceph_client_mount {
-	struct ceph_mon_request_header monhdr;
-} __attribute__ ((packed));
-
-#define CEPH_SUBSCRIBE_ONETIME    1  /* i want only 1 update after have */
-
-struct ceph_mon_subscribe_item {
-	__le64 have_version;    __le64 have;
-	__u8 onetime;
-} __attribute__ ((packed));
-
-struct ceph_mon_subscribe_ack {
-	__le32 duration;         /* seconds */
-	struct ceph_fsid fsid;
-} __attribute__ ((packed));
-
-/*
- * mds states
- *   > 0 -> in
- *  <= 0 -> out
- */
-#define CEPH_MDS_STATE_DNE          0  /* down, does not exist. */
-#define CEPH_MDS_STATE_STOPPED     -1  /* down, once existed, but no subtrees.
-					  empty log. */
-#define CEPH_MDS_STATE_BOOT        -4  /* up, boot announcement. */
-#define CEPH_MDS_STATE_STANDBY     -5  /* up, idle.  waiting for assignment. */
-#define CEPH_MDS_STATE_CREATING    -6  /* up, creating MDS instance. */
-#define CEPH_MDS_STATE_STARTING    -7  /* up, starting previously stopped mds */
-#define CEPH_MDS_STATE_STANDBY_REPLAY -8 /* up, tailing active node's journal */
-
-#define CEPH_MDS_STATE_REPLAY       8  /* up, replaying journal. */
-#define CEPH_MDS_STATE_RESOLVE      9  /* up, disambiguating distributed
-					  operations (import, rename, etc.) */
-#define CEPH_MDS_STATE_RECONNECT    10 /* up, reconnect to clients */
-#define CEPH_MDS_STATE_REJOIN       11 /* up, rejoining distributed cache */
-#define CEPH_MDS_STATE_CLIENTREPLAY 12 /* up, replaying client operations */
-#define CEPH_MDS_STATE_ACTIVE       13 /* up, active */
-#define CEPH_MDS_STATE_STOPPING     14 /* up, but exporting metadata */
-
-extern const char *ceph_mds_state_name(int s);
-
-
-/*
- * metadata lock types.
- *  - these are bitmasks.. we can compose them
- *  - they also define the lock ordering by the MDS
- *  - a few of these are internal to the mds
- */
-#define CEPH_LOCK_DVERSION    1
-#define CEPH_LOCK_DN          2
-#define CEPH_LOCK_ISNAP       16
-#define CEPH_LOCK_IVERSION    32    /* mds internal */
-#define CEPH_LOCK_IFILE       64
-#define CEPH_LOCK_IAUTH       128
-#define CEPH_LOCK_ILINK       256
-#define CEPH_LOCK_IDFT        512   /* dir frag tree */
-#define CEPH_LOCK_INEST       1024  /* mds internal */
-#define CEPH_LOCK_IXATTR      2048
-#define CEPH_LOCK_IFLOCK      4096  /* advisory file locks */
-#define CEPH_LOCK_INO         8192  /* immutable inode bits; not a lock */
-
-/* client_session ops */
-enum {
-	CEPH_SESSION_REQUEST_OPEN,
-	CEPH_SESSION_OPEN,
-	CEPH_SESSION_REQUEST_CLOSE,
-	CEPH_SESSION_CLOSE,
-	CEPH_SESSION_REQUEST_RENEWCAPS,
-	CEPH_SESSION_RENEWCAPS,
-	CEPH_SESSION_STALE,
-	CEPH_SESSION_RECALL_STATE,
-};
-
-extern const char *ceph_session_op_name(int op);
-
-struct ceph_mds_session_head {
-	__le32 op;
-	__le64 seq;
-	struct ceph_timespec stamp;
-	__le32 max_caps, max_leases;
-} __attribute__ ((packed));
-
-/* client_request */
-/*
- * metadata ops.
- *  & 0x001000 -> write op
- *  & 0x010000 -> follow symlink (e.g. stat(), not lstat()).
- &  & 0x100000 -> use weird ino/path trace
- */
-#define CEPH_MDS_OP_WRITE        0x001000
-enum {
-	CEPH_MDS_OP_LOOKUP     = 0x00100,
-	CEPH_MDS_OP_GETATTR    = 0x00101,
-	CEPH_MDS_OP_LOOKUPHASH = 0x00102,
-	CEPH_MDS_OP_LOOKUPPARENT = 0x00103,
-	CEPH_MDS_OP_LOOKUPINO  = 0x00104,
-
-	CEPH_MDS_OP_SETXATTR   = 0x01105,
-	CEPH_MDS_OP_RMXATTR    = 0x01106,
-	CEPH_MDS_OP_SETLAYOUT  = 0x01107,
-	CEPH_MDS_OP_SETATTR    = 0x01108,
-	CEPH_MDS_OP_SETFILELOCK= 0x01109,
-	CEPH_MDS_OP_GETFILELOCK= 0x00110,
-	CEPH_MDS_OP_SETDIRLAYOUT=0x0110a,
-
-	CEPH_MDS_OP_MKNOD      = 0x01201,
-	CEPH_MDS_OP_LINK       = 0x01202,
-	CEPH_MDS_OP_UNLINK     = 0x01203,
-	CEPH_MDS_OP_RENAME     = 0x01204,
-	CEPH_MDS_OP_MKDIR      = 0x01220,
-	CEPH_MDS_OP_RMDIR      = 0x01221,
-	CEPH_MDS_OP_SYMLINK    = 0x01222,
-
-	CEPH_MDS_OP_CREATE     = 0x01301,
-	CEPH_MDS_OP_OPEN       = 0x00302,
-	CEPH_MDS_OP_READDIR    = 0x00305,
-
-	CEPH_MDS_OP_LOOKUPSNAP = 0x00400,
-	CEPH_MDS_OP_MKSNAP     = 0x01400,
-	CEPH_MDS_OP_RMSNAP     = 0x01401,
-	CEPH_MDS_OP_LSSNAP     = 0x00402,
-};
-
-extern const char *ceph_mds_op_name(int op);
-
-
-#define CEPH_SETATTR_MODE   1
-#define CEPH_SETATTR_UID    2
-#define CEPH_SETATTR_GID    4
-#define CEPH_SETATTR_MTIME  8
-#define CEPH_SETATTR_ATIME 16
-#define CEPH_SETATTR_SIZE  32
-#define CEPH_SETATTR_CTIME 64
-
-union ceph_mds_request_args {
-	struct {
-		__le32 mask;                 /* CEPH_CAP_* */
-	} __attribute__ ((packed)) getattr;
-	struct {
-		__le32 mode;
-		__le32 uid;
-		__le32 gid;
-		struct ceph_timespec mtime;
-		struct ceph_timespec atime;
-		__le64 size, old_size;       /* old_size needed by truncate */
-		__le32 mask;                 /* CEPH_SETATTR_* */
-	} __attribute__ ((packed)) setattr;
-	struct {
-		__le32 frag;                 /* which dir fragment */
-		__le32 max_entries;          /* how many dentries to grab */
-		__le32 max_bytes;
-	} __attribute__ ((packed)) readdir;
-	struct {
-		__le32 mode;
-		__le32 rdev;
-	} __attribute__ ((packed)) mknod;
-	struct {
-		__le32 mode;
-	} __attribute__ ((packed)) mkdir;
-	struct {
-		__le32 flags;
-		__le32 mode;
-		__le32 stripe_unit;          /* layout for newly created file */
-		__le32 stripe_count;         /* ... */
-		__le32 object_size;
-		__le32 file_replication;
-		__le32 preferred;
-	} __attribute__ ((packed)) open;
-	struct {
-		__le32 flags;
-	} __attribute__ ((packed)) setxattr;
-	struct {
-		struct ceph_file_layout layout;
-	} __attribute__ ((packed)) setlayout;
-	struct {
-		__u8 rule; /* currently fcntl or flock */
-		__u8 type; /* shared, exclusive, remove*/
-		__le64 pid; /* process id requesting the lock */
-		__le64 pid_namespace;
-		__le64 start; /* initial location to lock */
-		__le64 length; /* num bytes to lock from start */
-		__u8 wait; /* will caller wait for lock to become available? */
-	} __attribute__ ((packed)) filelock_change;
-} __attribute__ ((packed));
-
-#define CEPH_MDS_FLAG_REPLAY        1  /* this is a replayed op */
-#define CEPH_MDS_FLAG_WANT_DENTRY   2  /* want dentry in reply */
-
-struct ceph_mds_request_head {
-	__le64 oldest_client_tid;
-	__le32 mdsmap_epoch;           /* on client */
-	__le32 flags;                  /* CEPH_MDS_FLAG_* */
-	__u8 num_retry, num_fwd;       /* count retry, fwd attempts */
-	__le16 num_releases;           /* # include cap/lease release records */
-	__le32 op;                     /* mds op code */
-	__le32 caller_uid, caller_gid;
-	__le64 ino;                    /* use this ino for openc, mkdir, mknod,
-					  etc. (if replaying) */
-	union ceph_mds_request_args args;
-} __attribute__ ((packed));
-
-/* cap/lease release record */
-struct ceph_mds_request_release {
-	__le64 ino, cap_id;            /* ino and unique cap id */
-	__le32 caps, wanted;           /* new issued, wanted */
-	__le32 seq, issue_seq, mseq;
-	__le32 dname_seq;              /* if releasing a dentry lease, a */
-	__le32 dname_len;              /* string follows. */
-} __attribute__ ((packed));
-
-/* client reply */
-struct ceph_mds_reply_head {
-	__le32 op;
-	__le32 result;
-	__le32 mdsmap_epoch;
-	__u8 safe;                     /* true if committed to disk */
-	__u8 is_dentry, is_target;     /* true if dentry, target inode records
-					  are included with reply */
-} __attribute__ ((packed));
-
-/* one for each node split */
-struct ceph_frag_tree_split {
-	__le32 frag;                   /* this frag splits... */
-	__le32 by;                     /* ...by this many bits */
-} __attribute__ ((packed));
-
-struct ceph_frag_tree_head {
-	__le32 nsplits;                /* num ceph_frag_tree_split records */
-	struct ceph_frag_tree_split splits[];
-} __attribute__ ((packed));
-
-/* capability issue, for bundling with mds reply */
-struct ceph_mds_reply_cap {
-	__le32 caps, wanted;           /* caps issued, wanted */
-	__le64 cap_id;
-	__le32 seq, mseq;
-	__le64 realm;                  /* snap realm */
-	__u8 flags;                    /* CEPH_CAP_FLAG_* */
-} __attribute__ ((packed));
-
-#define CEPH_CAP_FLAG_AUTH  1          /* cap is issued by auth mds */
-
-/* inode record, for bundling with mds reply */
-struct ceph_mds_reply_inode {
-	__le64 ino;
-	__le64 snapid;
-	__le32 rdev;
-	__le64 version;                /* inode version */
-	__le64 xattr_version;          /* version for xattr blob */
-	struct ceph_mds_reply_cap cap; /* caps issued for this inode */
-	struct ceph_file_layout layout;
-	struct ceph_timespec ctime, mtime, atime;
-	__le32 time_warp_seq;
-	__le64 size, max_size, truncate_size;
-	__le32 truncate_seq;
-	__le32 mode, uid, gid;
-	__le32 nlink;
-	__le64 files, subdirs, rbytes, rfiles, rsubdirs;  /* dir stats */
-	struct ceph_timespec rctime;
-	struct ceph_frag_tree_head fragtree;  /* (must be at end of struct) */
-} __attribute__ ((packed));
-/* followed by frag array, symlink string, dir layout, xattr blob */
-
-/* reply_lease follows dname, and reply_inode */
-struct ceph_mds_reply_lease {
-	__le16 mask;            /* lease type(s) */
-	__le32 duration_ms;     /* lease duration */
-	__le32 seq;
-} __attribute__ ((packed));
-
-struct ceph_mds_reply_dirfrag {
-	__le32 frag;            /* fragment */
-	__le32 auth;            /* auth mds, if this is a delegation point */
-	__le32 ndist;           /* number of mds' this is replicated on */
-	__le32 dist[];
-} __attribute__ ((packed));
-
-#define CEPH_LOCK_FCNTL    1
-#define CEPH_LOCK_FLOCK    2
-
-#define CEPH_LOCK_SHARED   1
-#define CEPH_LOCK_EXCL     2
-#define CEPH_LOCK_UNLOCK   4
-
-struct ceph_filelock {
-	__le64 start;/* file offset to start lock at */
-	__le64 length; /* num bytes to lock; 0 for all following start */
-	__le64 client; /* which client holds the lock */
-	__le64 pid; /* process id holding the lock on the client */
-	__le64 pid_namespace;
-	__u8 type; /* shared lock, exclusive lock, or unlock */
-} __attribute__ ((packed));
-
-
-/* file access modes */
-#define CEPH_FILE_MODE_PIN        0
-#define CEPH_FILE_MODE_RD         1
-#define CEPH_FILE_MODE_WR         2
-#define CEPH_FILE_MODE_RDWR       3  /* RD | WR */
-#define CEPH_FILE_MODE_LAZY       4  /* lazy io */
-#define CEPH_FILE_MODE_NUM        8  /* bc these are bit fields.. mostly */
-
-int ceph_flags_to_mode(int flags);
-
-
-/* capability bits */
-#define CEPH_CAP_PIN         1  /* no specific capabilities beyond the pin */
-
-/* generic cap bits */
-#define CEPH_CAP_GSHARED     1  /* client can reads */
-#define CEPH_CAP_GEXCL       2  /* client can read and update */
-#define CEPH_CAP_GCACHE      4  /* (file) client can cache reads */
-#define CEPH_CAP_GRD         8  /* (file) client can read */
-#define CEPH_CAP_GWR        16  /* (file) client can write */
-#define CEPH_CAP_GBUFFER    32  /* (file) client can buffer writes */
-#define CEPH_CAP_GWREXTEND  64  /* (file) client can extend EOF */
-#define CEPH_CAP_GLAZYIO   128  /* (file) client can perform lazy io */
-
-/* per-lock shift */
-#define CEPH_CAP_SAUTH      2
-#define CEPH_CAP_SLINK      4
-#define CEPH_CAP_SXATTR     6
-#define CEPH_CAP_SFILE      8
-#define CEPH_CAP_SFLOCK    20 
-
-#define CEPH_CAP_BITS       22
-
-/* composed values */
-#define CEPH_CAP_AUTH_SHARED  (CEPH_CAP_GSHARED  << CEPH_CAP_SAUTH)
-#define CEPH_CAP_AUTH_EXCL     (CEPH_CAP_GEXCL     << CEPH_CAP_SAUTH)
-#define CEPH_CAP_LINK_SHARED  (CEPH_CAP_GSHARED  << CEPH_CAP_SLINK)
-#define CEPH_CAP_LINK_EXCL     (CEPH_CAP_GEXCL     << CEPH_CAP_SLINK)
-#define CEPH_CAP_XATTR_SHARED (CEPH_CAP_GSHARED  << CEPH_CAP_SXATTR)
-#define CEPH_CAP_XATTR_EXCL    (CEPH_CAP_GEXCL     << CEPH_CAP_SXATTR)
-#define CEPH_CAP_FILE(x)    (x << CEPH_CAP_SFILE)
-#define CEPH_CAP_FILE_SHARED   (CEPH_CAP_GSHARED   << CEPH_CAP_SFILE)
-#define CEPH_CAP_FILE_EXCL     (CEPH_CAP_GEXCL     << CEPH_CAP_SFILE)
-#define CEPH_CAP_FILE_CACHE    (CEPH_CAP_GCACHE    << CEPH_CAP_SFILE)
-#define CEPH_CAP_FILE_RD       (CEPH_CAP_GRD       << CEPH_CAP_SFILE)
-#define CEPH_CAP_FILE_WR       (CEPH_CAP_GWR       << CEPH_CAP_SFILE)
-#define CEPH_CAP_FILE_BUFFER   (CEPH_CAP_GBUFFER   << CEPH_CAP_SFILE)
-#define CEPH_CAP_FILE_WREXTEND (CEPH_CAP_GWREXTEND << CEPH_CAP_SFILE)
-#define CEPH_CAP_FILE_LAZYIO   (CEPH_CAP_GLAZYIO   << CEPH_CAP_SFILE)
-#define CEPH_CAP_FLOCK_SHARED  (CEPH_CAP_GSHARED   << CEPH_CAP_SFLOCK)
-#define CEPH_CAP_FLOCK_EXCL    (CEPH_CAP_GEXCL     << CEPH_CAP_SFLOCK)
-
-
-/* cap masks (for getattr) */
-#define CEPH_STAT_CAP_INODE    CEPH_CAP_PIN
-#define CEPH_STAT_CAP_TYPE     CEPH_CAP_PIN  /* mode >> 12 */
-#define CEPH_STAT_CAP_SYMLINK  CEPH_CAP_PIN
-#define CEPH_STAT_CAP_UID      CEPH_CAP_AUTH_SHARED
-#define CEPH_STAT_CAP_GID      CEPH_CAP_AUTH_SHARED
-#define CEPH_STAT_CAP_MODE     CEPH_CAP_AUTH_SHARED
-#define CEPH_STAT_CAP_NLINK    CEPH_CAP_LINK_SHARED
-#define CEPH_STAT_CAP_LAYOUT   CEPH_CAP_FILE_SHARED
-#define CEPH_STAT_CAP_MTIME    CEPH_CAP_FILE_SHARED
-#define CEPH_STAT_CAP_SIZE     CEPH_CAP_FILE_SHARED
-#define CEPH_STAT_CAP_ATIME    CEPH_CAP_FILE_SHARED  /* fixme */
-#define CEPH_STAT_CAP_XATTR    CEPH_CAP_XATTR_SHARED
-#define CEPH_STAT_CAP_INODE_ALL (CEPH_CAP_PIN |			\
-				 CEPH_CAP_AUTH_SHARED |	\
-				 CEPH_CAP_LINK_SHARED |	\
-				 CEPH_CAP_FILE_SHARED |	\
-				 CEPH_CAP_XATTR_SHARED)
-
-#define CEPH_CAP_ANY_SHARED (CEPH_CAP_AUTH_SHARED |			\
-			      CEPH_CAP_LINK_SHARED |			\
-			      CEPH_CAP_XATTR_SHARED |			\
-			      CEPH_CAP_FILE_SHARED)
-#define CEPH_CAP_ANY_RD   (CEPH_CAP_ANY_SHARED | CEPH_CAP_FILE_RD |	\
-			   CEPH_CAP_FILE_CACHE)
-
-#define CEPH_CAP_ANY_EXCL (CEPH_CAP_AUTH_EXCL |		\
-			   CEPH_CAP_LINK_EXCL |		\
-			   CEPH_CAP_XATTR_EXCL |	\
-			   CEPH_CAP_FILE_EXCL)
-#define CEPH_CAP_ANY_FILE_WR (CEPH_CAP_FILE_WR | CEPH_CAP_FILE_BUFFER |	\
-			      CEPH_CAP_FILE_EXCL)
-#define CEPH_CAP_ANY_WR   (CEPH_CAP_ANY_EXCL | CEPH_CAP_ANY_FILE_WR)
-#define CEPH_CAP_ANY      (CEPH_CAP_ANY_RD | CEPH_CAP_ANY_EXCL | \
-			   CEPH_CAP_ANY_FILE_WR | CEPH_CAP_FILE_LAZYIO | \
-			   CEPH_CAP_PIN)
-
-#define CEPH_CAP_LOCKS (CEPH_LOCK_IFILE | CEPH_LOCK_IAUTH | CEPH_LOCK_ILINK | \
-			CEPH_LOCK_IXATTR)
-
-int ceph_caps_for_mode(int mode);
-
-enum {
-	CEPH_CAP_OP_GRANT,         /* mds->client grant */
-	CEPH_CAP_OP_REVOKE,        /* mds->client revoke */
-	CEPH_CAP_OP_TRUNC,         /* mds->client trunc notify */
-	CEPH_CAP_OP_EXPORT,        /* mds has exported the cap */
-	CEPH_CAP_OP_IMPORT,        /* mds has imported the cap */
-	CEPH_CAP_OP_UPDATE,        /* client->mds update */
-	CEPH_CAP_OP_DROP,          /* client->mds drop cap bits */
-	CEPH_CAP_OP_FLUSH,         /* client->mds cap writeback */
-	CEPH_CAP_OP_FLUSH_ACK,     /* mds->client flushed */
-	CEPH_CAP_OP_FLUSHSNAP,     /* client->mds flush snapped metadata */
-	CEPH_CAP_OP_FLUSHSNAP_ACK, /* mds->client flushed snapped metadata */
-	CEPH_CAP_OP_RELEASE,       /* client->mds release (clean) cap */
-	CEPH_CAP_OP_RENEW,         /* client->mds renewal request */
-};
-
-extern const char *ceph_cap_op_name(int op);
-
-/*
- * caps message, used for capability callbacks, acks, requests, etc.
- */
-struct ceph_mds_caps {
-	__le32 op;                  /* CEPH_CAP_OP_* */
-	__le64 ino, realm;
-	__le64 cap_id;
-	__le32 seq, issue_seq;
-	__le32 caps, wanted, dirty; /* latest issued/wanted/dirty */
-	__le32 migrate_seq;
-	__le64 snap_follows;
-	__le32 snap_trace_len;
-
-	/* authlock */
-	__le32 uid, gid, mode;
-
-	/* linklock */
-	__le32 nlink;
-
-	/* xattrlock */
-	__le32 xattr_len;
-	__le64 xattr_version;
-
-	/* filelock */
-	__le64 size, max_size, truncate_size;
-	__le32 truncate_seq;
-	struct ceph_timespec mtime, atime, ctime;
-	struct ceph_file_layout layout;
-	__le32 time_warp_seq;
-} __attribute__ ((packed));
-
-/* cap release msg head */
-struct ceph_mds_cap_release {
-	__le32 num;                /* number of cap_items that follow */
-} __attribute__ ((packed));
-
-struct ceph_mds_cap_item {
-	__le64 ino;
-	__le64 cap_id;
-	__le32 migrate_seq, seq;
-} __attribute__ ((packed));
-
-#define CEPH_MDS_LEASE_REVOKE           1  /*    mds  -> client */
-#define CEPH_MDS_LEASE_RELEASE          2  /* client  -> mds    */
-#define CEPH_MDS_LEASE_RENEW            3  /* client <-> mds    */
-#define CEPH_MDS_LEASE_REVOKE_ACK       4  /* client  -> mds    */
-
-extern const char *ceph_lease_op_name(int o);
-
-/* lease msg header */
-struct ceph_mds_lease {
-	__u8 action;            /* CEPH_MDS_LEASE_* */
-	__le16 mask;            /* which lease */
-	__le64 ino;
-	__le64 first, last;     /* snap range */
-	__le32 seq;
-	__le32 duration_ms;     /* duration of renewal */
-} __attribute__ ((packed));
-/* followed by a __le32+string for dname */
-
-/* client reconnect */
-struct ceph_mds_cap_reconnect {
-	__le64 cap_id;
-	__le32 wanted;
-	__le32 issued;
-	__le64 snaprealm;
-	__le64 pathbase;        /* base ino for our path to this ino */
-	__le32 flock_len;       /* size of flock state blob, if any */
-} __attribute__ ((packed));
-/* followed by flock blob */
-
-struct ceph_mds_cap_reconnect_v1 {
-	__le64 cap_id;
-	__le32 wanted;
-	__le32 issued;
-	__le64 size;
-	struct ceph_timespec mtime, atime;
-	__le64 snaprealm;
-	__le64 pathbase;        /* base ino for our path to this ino */
-} __attribute__ ((packed));
-
-struct ceph_mds_snaprealm_reconnect {
-	__le64 ino;     /* snap realm base */
-	__le64 seq;     /* snap seq for this snap realm */
-	__le64 parent;  /* parent realm */
-} __attribute__ ((packed));
-
-/*
- * snaps
- */
-enum {
-	CEPH_SNAP_OP_UPDATE,  /* CREATE or DESTROY */
-	CEPH_SNAP_OP_CREATE,
-	CEPH_SNAP_OP_DESTROY,
-	CEPH_SNAP_OP_SPLIT,
-};
-
-extern const char *ceph_snap_op_name(int o);
-
-/* snap msg header */
-struct ceph_mds_snap_head {
-	__le32 op;                /* CEPH_SNAP_OP_* */
-	__le64 split;             /* ino to split off, if any */
-	__le32 num_split_inos;    /* # inos belonging to new child realm */
-	__le32 num_split_realms;  /* # child realms udner new child realm */
-	__le32 trace_len;         /* size of snap trace blob */
-} __attribute__ ((packed));
-/* followed by split ino list, then split realms, then the trace blob */
-
-/*
- * encode info about a snaprealm, as viewed by a client
- */
-struct ceph_mds_snap_realm {
-	__le64 ino;           /* ino */
-	__le64 created;       /* snap: when created */
-	__le64 parent;        /* ino: parent realm */
-	__le64 parent_since;  /* snap: same parent since */
-	__le64 seq;           /* snap: version */
-	__le32 num_snaps;
-	__le32 num_prior_parent_snaps;
-} __attribute__ ((packed));
-/* followed by my snap list, then prior parent snap list */
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/ceph/ceph_hash.h b/ANDROID_3.4.5/include/linux/ceph/ceph_hash.h
deleted file mode 100644
index d099c3f9..00000000
--- a/ANDROID_3.4.5/include/linux/ceph/ceph_hash.h
+++ /dev/null
@@ -1,13 +0,0 @@
-#ifndef FS_CEPH_HASH_H
-#define FS_CEPH_HASH_H
-
-#define CEPH_STR_HASH_LINUX      0x1  /* linux dcache hash */
-#define CEPH_STR_HASH_RJENKINS   0x2  /* robert jenkins' */
-
-extern unsigned ceph_str_hash_linux(const char *s, unsigned len);
-extern unsigned ceph_str_hash_rjenkins(const char *s, unsigned len);
-
-extern unsigned ceph_str_hash(int type, const char *s, unsigned len);
-extern const char *ceph_str_hash_name(int type);
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/ceph/debugfs.h b/ANDROID_3.4.5/include/linux/ceph/debugfs.h
deleted file mode 100644
index 2a79702e..00000000
--- a/ANDROID_3.4.5/include/linux/ceph/debugfs.h
+++ /dev/null
@@ -1,33 +0,0 @@
-#ifndef _FS_CEPH_DEBUGFS_H
-#define _FS_CEPH_DEBUGFS_H
-
-#include "ceph_debug.h"
-#include "types.h"
-
-#define CEPH_DEFINE_SHOW_FUNC(name)					\
-static int name##_open(struct inode *inode, struct file *file)		\
-{									\
-	struct seq_file *sf;						\
-	int ret;							\
-									\
-	ret = single_open(file, name, NULL);				\
-	sf = file->private_data;					\
-	sf->private = inode->i_private;					\
-	return ret;							\
-}									\
-									\
-static const struct file_operations name##_fops = {			\
-	.open		= name##_open,					\
-	.read		= seq_read,					\
-	.llseek		= seq_lseek,					\
-	.release	= single_release,				\
-};
-
-/* debugfs.c */
-extern int ceph_debugfs_init(void);
-extern void ceph_debugfs_cleanup(void);
-extern int ceph_debugfs_client_init(struct ceph_client *client);
-extern void ceph_debugfs_client_cleanup(struct ceph_client *client);
-
-#endif
-
diff --git a/ANDROID_3.4.5/include/linux/ceph/decode.h b/ANDROID_3.4.5/include/linux/ceph/decode.h
deleted file mode 100644
index 220ae21e..00000000
--- a/ANDROID_3.4.5/include/linux/ceph/decode.h
+++ /dev/null
@@ -1,202 +0,0 @@
-#ifndef __CEPH_DECODE_H
-#define __CEPH_DECODE_H
-
-#include <linux/bug.h>
-#include <linux/time.h>
-#include <asm/unaligned.h>
-
-#include "types.h"
-
-/*
- * in all cases,
- *   void **p     pointer to position pointer
- *   void *end    pointer to end of buffer (last byte + 1)
- */
-
-static inline u64 ceph_decode_64(void **p)
-{
-	u64 v = get_unaligned_le64(*p);
-	*p += sizeof(u64);
-	return v;
-}
-static inline u32 ceph_decode_32(void **p)
-{
-	u32 v = get_unaligned_le32(*p);
-	*p += sizeof(u32);
-	return v;
-}
-static inline u16 ceph_decode_16(void **p)
-{
-	u16 v = get_unaligned_le16(*p);
-	*p += sizeof(u16);
-	return v;
-}
-static inline u8 ceph_decode_8(void **p)
-{
-	u8 v = *(u8 *)*p;
-	(*p)++;
-	return v;
-}
-static inline void ceph_decode_copy(void **p, void *pv, size_t n)
-{
-	memcpy(pv, *p, n);
-	*p += n;
-}
-
-/*
- * bounds check input.
- */
-#define ceph_decode_need(p, end, n, bad)		\
-	do {						\
-		if (unlikely(*(p) + (n) > (end))) 	\
-			goto bad;			\
-	} while (0)
-
-#define ceph_decode_64_safe(p, end, v, bad)			\
-	do {							\
-		ceph_decode_need(p, end, sizeof(u64), bad);	\
-		v = ceph_decode_64(p);				\
-	} while (0)
-#define ceph_decode_32_safe(p, end, v, bad)			\
-	do {							\
-		ceph_decode_need(p, end, sizeof(u32), bad);	\
-		v = ceph_decode_32(p);				\
-	} while (0)
-#define ceph_decode_16_safe(p, end, v, bad)			\
-	do {							\
-		ceph_decode_need(p, end, sizeof(u16), bad);	\
-		v = ceph_decode_16(p);				\
-	} while (0)
-#define ceph_decode_8_safe(p, end, v, bad)			\
-	do {							\
-		ceph_decode_need(p, end, sizeof(u8), bad);	\
-		v = ceph_decode_8(p);				\
-	} while (0)
-
-#define ceph_decode_copy_safe(p, end, pv, n, bad)		\
-	do {							\
-		ceph_decode_need(p, end, n, bad);		\
-		ceph_decode_copy(p, pv, n);			\
-	} while (0)
-
-/*
- * struct ceph_timespec <-> struct timespec
- */
-static inline void ceph_decode_timespec(struct timespec *ts,
-					const struct ceph_timespec *tv)
-{
-	ts->tv_sec = le32_to_cpu(tv->tv_sec);
-	ts->tv_nsec = le32_to_cpu(tv->tv_nsec);
-}
-static inline void ceph_encode_timespec(struct ceph_timespec *tv,
-					const struct timespec *ts)
-{
-	tv->tv_sec = cpu_to_le32(ts->tv_sec);
-	tv->tv_nsec = cpu_to_le32(ts->tv_nsec);
-}
-
-/*
- * sockaddr_storage <-> ceph_sockaddr
- */
-static inline void ceph_encode_addr(struct ceph_entity_addr *a)
-{
-	__be16 ss_family = htons(a->in_addr.ss_family);
-	a->in_addr.ss_family = *(__u16 *)&ss_family;
-}
-static inline void ceph_decode_addr(struct ceph_entity_addr *a)
-{
-	__be16 ss_family = *(__be16 *)&a->in_addr.ss_family;
-	a->in_addr.ss_family = ntohs(ss_family);
-	WARN_ON(a->in_addr.ss_family == 512);
-}
-
-/*
- * encoders
- */
-static inline void ceph_encode_64(void **p, u64 v)
-{
-	put_unaligned_le64(v, (__le64 *)*p);
-	*p += sizeof(u64);
-}
-static inline void ceph_encode_32(void **p, u32 v)
-{
-	put_unaligned_le32(v, (__le32 *)*p);
-	*p += sizeof(u32);
-}
-static inline void ceph_encode_16(void **p, u16 v)
-{
-	put_unaligned_le16(v, (__le16 *)*p);
-	*p += sizeof(u16);
-}
-static inline void ceph_encode_8(void **p, u8 v)
-{
-	*(u8 *)*p = v;
-	(*p)++;
-}
-static inline void ceph_encode_copy(void **p, const void *s, int len)
-{
-	memcpy(*p, s, len);
-	*p += len;
-}
-
-/*
- * filepath, string encoders
- */
-static inline void ceph_encode_filepath(void **p, void *end,
-					u64 ino, const char *path)
-{
-	u32 len = path ? strlen(path) : 0;
-	BUG_ON(*p + sizeof(ino) + sizeof(len) + len > end);
-	ceph_encode_8(p, 1);
-	ceph_encode_64(p, ino);
-	ceph_encode_32(p, len);
-	if (len)
-		memcpy(*p, path, len);
-	*p += len;
-}
-
-static inline void ceph_encode_string(void **p, void *end,
-				      const char *s, u32 len)
-{
-	BUG_ON(*p + sizeof(len) + len > end);
-	ceph_encode_32(p, len);
-	if (len)
-		memcpy(*p, s, len);
-	*p += len;
-}
-
-#define ceph_encode_need(p, end, n, bad)		\
-	do {						\
-		if (unlikely(*(p) + (n) > (end))) 	\
-			goto bad;			\
-	} while (0)
-
-#define ceph_encode_64_safe(p, end, v, bad)			\
-	do {							\
-		ceph_encode_need(p, end, sizeof(u64), bad);	\
-		ceph_encode_64(p, v);				\
-	} while (0)
-#define ceph_encode_32_safe(p, end, v, bad)			\
-	do {							\
-		ceph_encode_need(p, end, sizeof(u32), bad);	\
-		ceph_encode_32(p, v);			\
-	} while (0)
-#define ceph_encode_16_safe(p, end, v, bad)			\
-	do {							\
-		ceph_encode_need(p, end, sizeof(u16), bad);	\
-		ceph_encode_16(p, v);			\
-	} while (0)
-
-#define ceph_encode_copy_safe(p, end, pv, n, bad)		\
-	do {							\
-		ceph_encode_need(p, end, n, bad);		\
-		ceph_encode_copy(p, pv, n);			\
-	} while (0)
-#define ceph_encode_string_safe(p, end, s, n, bad)		\
-	do {							\
-		ceph_encode_need(p, end, n, bad);		\
-		ceph_encode_string(p, end, s, n);		\
-	} while (0)
-
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/ceph/libceph.h b/ANDROID_3.4.5/include/linux/ceph/libceph.h
deleted file mode 100644
index e71d6839..00000000
--- a/ANDROID_3.4.5/include/linux/ceph/libceph.h
+++ /dev/null
@@ -1,252 +0,0 @@
-#ifndef _FS_CEPH_LIBCEPH_H
-#define _FS_CEPH_LIBCEPH_H
-
-#include "ceph_debug.h"
-
-#include <asm/unaligned.h>
-#include <linux/backing-dev.h>
-#include <linux/completion.h>
-#include <linux/exportfs.h>
-#include <linux/bug.h>
-#include <linux/fs.h>
-#include <linux/mempool.h>
-#include <linux/pagemap.h>
-#include <linux/wait.h>
-#include <linux/writeback.h>
-#include <linux/slab.h>
-
-#include "types.h"
-#include "messenger.h"
-#include "msgpool.h"
-#include "mon_client.h"
-#include "osd_client.h"
-#include "ceph_fs.h"
-
-/*
- * Supported features
- */
-#define CEPH_FEATURE_SUPPORTED_DEFAULT CEPH_FEATURE_NOSRCADDR
-#define CEPH_FEATURE_REQUIRED_DEFAULT  CEPH_FEATURE_NOSRCADDR
-
-/*
- * mount options
- */
-#define CEPH_OPT_FSID             (1<<0)
-#define CEPH_OPT_NOSHARE          (1<<1) /* don't share client with other sbs */
-#define CEPH_OPT_MYIP             (1<<2) /* specified my ip */
-#define CEPH_OPT_NOCRC            (1<<3) /* no data crc on writes */
-
-#define CEPH_OPT_DEFAULT   (0)
-
-#define ceph_set_opt(client, opt) \
-	(client)->options->flags |= CEPH_OPT_##opt;
-#define ceph_test_opt(client, opt) \
-	(!!((client)->options->flags & CEPH_OPT_##opt))
-
-struct ceph_options {
-	int flags;
-	struct ceph_fsid fsid;
-	struct ceph_entity_addr my_addr;
-	int mount_timeout;
-	int osd_idle_ttl;
-	int osd_timeout;
-	int osd_keepalive_timeout;
-
-	/*
-	 * any type that can't be simply compared or doesn't need need
-	 * to be compared should go beyond this point,
-	 * ceph_compare_options() should be updated accordingly
-	 */
-
-	struct ceph_entity_addr *mon_addr; /* should be the first
-					      pointer type of args */
-	int num_mon;
-	char *name;
-	struct ceph_crypto_key *key;
-};
-
-/*
- * defaults
- */
-#define CEPH_MOUNT_TIMEOUT_DEFAULT  60
-#define CEPH_OSD_TIMEOUT_DEFAULT    60  /* seconds */
-#define CEPH_OSD_KEEPALIVE_DEFAULT  5
-#define CEPH_OSD_IDLE_TTL_DEFAULT    60
-
-#define CEPH_MSG_MAX_FRONT_LEN	(16*1024*1024)
-#define CEPH_MSG_MAX_DATA_LEN	(16*1024*1024)
-
-#define CEPH_AUTH_NAME_DEFAULT   "guest"
-
-/*
- * Delay telling the MDS we no longer want caps, in case we reopen
- * the file.  Delay a minimum amount of time, even if we send a cap
- * message for some other reason.  Otherwise, take the oppotunity to
- * update the mds to avoid sending another message later.
- */
-#define CEPH_CAPS_WANTED_DELAY_MIN_DEFAULT      5  /* cap release delay */
-#define CEPH_CAPS_WANTED_DELAY_MAX_DEFAULT     60  /* cap release delay */
-
-#define CEPH_CAP_RELEASE_SAFETY_DEFAULT        (CEPH_CAPS_PER_RELEASE * 4)
-
-/* mount state */
-enum {
-	CEPH_MOUNT_MOUNTING,
-	CEPH_MOUNT_MOUNTED,
-	CEPH_MOUNT_UNMOUNTING,
-	CEPH_MOUNT_UNMOUNTED,
-	CEPH_MOUNT_SHUTDOWN,
-};
-
-/*
- * subtract jiffies
- */
-static inline unsigned long time_sub(unsigned long a, unsigned long b)
-{
-	BUG_ON(time_after(b, a));
-	return (long)a - (long)b;
-}
-
-struct ceph_mds_client;
-
-/*
- * per client state
- *
- * possibly shared by multiple mount points, if they are
- * mounting the same ceph filesystem/cluster.
- */
-struct ceph_client {
-	struct ceph_fsid fsid;
-	bool have_fsid;
-
-	void *private;
-
-	struct ceph_options *options;
-
-	struct mutex mount_mutex;      /* serialize mount attempts */
-	wait_queue_head_t auth_wq;
-	int auth_err;
-
-	int (*extra_mon_dispatch)(struct ceph_client *, struct ceph_msg *);
-
-	u32 supported_features;
-	u32 required_features;
-
-	struct ceph_messenger *msgr;   /* messenger instance */
-	struct ceph_mon_client monc;
-	struct ceph_osd_client osdc;
-
-#ifdef CONFIG_DEBUG_FS
-	struct dentry *debugfs_dir;
-	struct dentry *debugfs_monmap;
-	struct dentry *debugfs_osdmap;
-#endif
-};
-
-
-
-/*
- * snapshots
- */
-
-/*
- * A "snap context" is the set of existing snapshots when we
- * write data.  It is used by the OSD to guide its COW behavior.
- *
- * The ceph_snap_context is refcounted, and attached to each dirty
- * page, indicating which context the dirty data belonged when it was
- * dirtied.
- */
-struct ceph_snap_context {
-	atomic_t nref;
-	u64 seq;
-	int num_snaps;
-	u64 snaps[];
-};
-
-static inline struct ceph_snap_context *
-ceph_get_snap_context(struct ceph_snap_context *sc)
-{
-	/*
-	printk("get_snap_context %p %d -> %d\n", sc, atomic_read(&sc->nref),
-	       atomic_read(&sc->nref)+1);
-	*/
-	if (sc)
-		atomic_inc(&sc->nref);
-	return sc;
-}
-
-static inline void ceph_put_snap_context(struct ceph_snap_context *sc)
-{
-	if (!sc)
-		return;
-	/*
-	printk("put_snap_context %p %d -> %d\n", sc, atomic_read(&sc->nref),
-	       atomic_read(&sc->nref)-1);
-	*/
-	if (atomic_dec_and_test(&sc->nref)) {
-		/*printk(" deleting snap_context %p\n", sc);*/
-		kfree(sc);
-	}
-}
-
-/*
- * calculate the number of pages a given length and offset map onto,
- * if we align the data.
- */
-static inline int calc_pages_for(u64 off, u64 len)
-{
-	return ((off+len+PAGE_CACHE_SIZE-1) >> PAGE_CACHE_SHIFT) -
-		(off >> PAGE_CACHE_SHIFT);
-}
-
-/* ceph_common.c */
-extern const char *ceph_msg_type_name(int type);
-extern int ceph_check_fsid(struct ceph_client *client, struct ceph_fsid *fsid);
-extern struct kmem_cache *ceph_inode_cachep;
-extern struct kmem_cache *ceph_cap_cachep;
-extern struct kmem_cache *ceph_dentry_cachep;
-extern struct kmem_cache *ceph_file_cachep;
-
-extern struct ceph_options *ceph_parse_options(char *options,
-			      const char *dev_name, const char *dev_name_end,
-			      int (*parse_extra_token)(char *c, void *private),
-			      void *private);
-extern void ceph_destroy_options(struct ceph_options *opt);
-extern int ceph_compare_options(struct ceph_options *new_opt,
-				struct ceph_client *client);
-extern struct ceph_client *ceph_create_client(struct ceph_options *opt,
-					      void *private,
-					      unsigned supported_features,
-					      unsigned required_features);
-extern u64 ceph_client_id(struct ceph_client *client);
-extern void ceph_destroy_client(struct ceph_client *client);
-extern int __ceph_open_session(struct ceph_client *client,
-			       unsigned long started);
-extern int ceph_open_session(struct ceph_client *client);
-
-/* pagevec.c */
-extern void ceph_release_page_vector(struct page **pages, int num_pages);
-
-extern struct page **ceph_get_direct_page_vector(const char __user *data,
-						 int num_pages,
-						 bool write_page);
-extern void ceph_put_page_vector(struct page **pages, int num_pages,
-				 bool dirty);
-extern void ceph_release_page_vector(struct page **pages, int num_pages);
-extern struct page **ceph_alloc_page_vector(int num_pages, gfp_t flags);
-extern int ceph_copy_user_to_page_vector(struct page **pages,
-					 const char __user *data,
-					 loff_t off, size_t len);
-extern int ceph_copy_to_page_vector(struct page **pages,
-				    const char *data,
-				    loff_t off, size_t len);
-extern int ceph_copy_from_page_vector(struct page **pages,
-				    char *data,
-				    loff_t off, size_t len);
-extern int ceph_copy_page_vector_to_user(struct page **pages, char __user *data,
-				    loff_t off, size_t len);
-extern void ceph_zero_page_vector_range(int off, int len, struct page **pages);
-
-
-#endif /* _FS_CEPH_SUPER_H */
diff --git a/ANDROID_3.4.5/include/linux/ceph/mdsmap.h b/ANDROID_3.4.5/include/linux/ceph/mdsmap.h
deleted file mode 100644
index 9935fac8..00000000
--- a/ANDROID_3.4.5/include/linux/ceph/mdsmap.h
+++ /dev/null
@@ -1,63 +0,0 @@
-#ifndef _FS_CEPH_MDSMAP_H
-#define _FS_CEPH_MDSMAP_H
-
-#include <linux/bug.h>
-#include "types.h"
-
-/*
- * mds map - describe servers in the mds cluster.
- *
- * we limit fields to those the client actually xcares about
- */
-struct ceph_mds_info {
-	u64 global_id;
-	struct ceph_entity_addr addr;
-	s32 state;
-	int num_export_targets;
-	bool laggy;
-	u32 *export_targets;
-};
-
-struct ceph_mdsmap {
-	u32 m_epoch, m_client_epoch, m_last_failure;
-	u32 m_root;
-	u32 m_session_timeout;          /* seconds */
-	u32 m_session_autoclose;        /* seconds */
-	u64 m_max_file_size;
-	u32 m_max_mds;                  /* size of m_addr, m_state arrays */
-	struct ceph_mds_info *m_info;
-
-	/* which object pools file data can be stored in */
-	int m_num_data_pg_pools;
-	u32 *m_data_pg_pools;
-	u32 m_cas_pg_pool;
-};
-
-static inline struct ceph_entity_addr *
-ceph_mdsmap_get_addr(struct ceph_mdsmap *m, int w)
-{
-	if (w >= m->m_max_mds)
-		return NULL;
-	return &m->m_info[w].addr;
-}
-
-static inline int ceph_mdsmap_get_state(struct ceph_mdsmap *m, int w)
-{
-	BUG_ON(w < 0);
-	if (w >= m->m_max_mds)
-		return CEPH_MDS_STATE_DNE;
-	return m->m_info[w].state;
-}
-
-static inline bool ceph_mdsmap_is_laggy(struct ceph_mdsmap *m, int w)
-{
-	if (w >= 0 && w < m->m_max_mds)
-		return m->m_info[w].laggy;
-	return false;
-}
-
-extern int ceph_mdsmap_get_random_mds(struct ceph_mdsmap *m);
-extern struct ceph_mdsmap *ceph_mdsmap_decode(void **p, void *end);
-extern void ceph_mdsmap_destroy(struct ceph_mdsmap *m);
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/ceph/messenger.h b/ANDROID_3.4.5/include/linux/ceph/messenger.h
deleted file mode 100644
index 3bff047f..00000000
--- a/ANDROID_3.4.5/include/linux/ceph/messenger.h
+++ /dev/null
@@ -1,255 +0,0 @@
-#ifndef __FS_CEPH_MESSENGER_H
-#define __FS_CEPH_MESSENGER_H
-
-#include <linux/kref.h>
-#include <linux/mutex.h>
-#include <linux/net.h>
-#include <linux/radix-tree.h>
-#include <linux/uio.h>
-#include <linux/workqueue.h>
-
-#include "types.h"
-#include "buffer.h"
-
-struct ceph_msg;
-struct ceph_connection;
-
-/*
- * Ceph defines these callbacks for handling connection events.
- */
-struct ceph_connection_operations {
-	struct ceph_connection *(*get)(struct ceph_connection *);
-	void (*put)(struct ceph_connection *);
-
-	/* handle an incoming message. */
-	void (*dispatch) (struct ceph_connection *con, struct ceph_msg *m);
-
-	/* authorize an outgoing connection */
-	int (*get_authorizer) (struct ceph_connection *con,
-			       void **buf, int *len, int *proto,
-			       void **reply_buf, int *reply_len, int force_new);
-	int (*verify_authorizer_reply) (struct ceph_connection *con, int len);
-	int (*invalidate_authorizer)(struct ceph_connection *con);
-
-	/* protocol version mismatch */
-	void (*bad_proto) (struct ceph_connection *con);
-
-	/* there was some error on the socket (disconnect, whatever) */
-	void (*fault) (struct ceph_connection *con);
-
-	/* a remote host as terminated a message exchange session, and messages
-	 * we sent (or they tried to send us) may be lost. */
-	void (*peer_reset) (struct ceph_connection *con);
-
-	struct ceph_msg * (*alloc_msg) (struct ceph_connection *con,
-					struct ceph_msg_header *hdr,
-					int *skip);
-};
-
-/* use format string %s%d */
-#define ENTITY_NAME(n) ceph_entity_type_name((n).type), le64_to_cpu((n).num)
-
-struct ceph_messenger {
-	struct ceph_entity_inst inst;    /* my name+address */
-	struct ceph_entity_addr my_enc_addr;
-
-	bool nocrc;
-
-	/*
-	 * the global_seq counts connections i (attempt to) initiate
-	 * in order to disambiguate certain connect race conditions.
-	 */
-	u32 global_seq;
-	spinlock_t global_seq_lock;
-
-	u32 supported_features;
-	u32 required_features;
-};
-
-/*
- * a single message.  it contains a header (src, dest, message type, etc.),
- * footer (crc values, mainly), a "front" message body, and possibly a
- * data payload (stored in some number of pages).
- */
-struct ceph_msg {
-	struct ceph_msg_header hdr;	/* header */
-	struct ceph_msg_footer footer;	/* footer */
-	struct kvec front;              /* unaligned blobs of message */
-	struct ceph_buffer *middle;
-	struct page **pages;            /* data payload.  NOT OWNER. */
-	unsigned nr_pages;              /* size of page array */
-	unsigned page_alignment;        /* io offset in first page */
-	struct ceph_pagelist *pagelist; /* instead of pages */
-	struct list_head list_head;
-	struct kref kref;
-	struct bio  *bio;		/* instead of pages/pagelist */
-	struct bio  *bio_iter;		/* bio iterator */
-	int bio_seg;			/* current bio segment */
-	struct ceph_pagelist *trail;	/* the trailing part of the data */
-	bool front_is_vmalloc;
-	bool more_to_follow;
-	bool needs_out_seq;
-	int front_max;
-	unsigned long ack_stamp;        /* tx: when we were acked */
-
-	struct ceph_msgpool *pool;
-};
-
-struct ceph_msg_pos {
-	int page, page_pos;  /* which page; offset in page */
-	int data_pos;        /* offset in data payload */
-	bool did_page_crc;   /* true if we've calculated crc for current page */
-};
-
-/* ceph connection fault delay defaults, for exponential backoff */
-#define BASE_DELAY_INTERVAL	(HZ/2)
-#define MAX_DELAY_INTERVAL	(5 * 60 * HZ)
-
-/*
- * ceph_connection state bit flags
- */
-#define LOSSYTX         0  /* we can close channel or drop messages on errors */
-#define CONNECTING	1
-#define NEGOTIATING	2
-#define KEEPALIVE_PENDING      3
-#define WRITE_PENDING	4  /* we have data ready to send */
-#define STANDBY		8  /* no outgoing messages, socket closed.  we keep
-			    * the ceph_connection around to maintain shared
-			    * state with the peer. */
-#define CLOSED		10 /* we've closed the connection */
-#define SOCK_CLOSED	11 /* socket state changed to closed */
-#define OPENING         13 /* open connection w/ (possibly new) peer */
-#define DEAD            14 /* dead, about to kfree */
-#define BACKOFF         15
-
-/*
- * A single connection with another host.
- *
- * We maintain a queue of outgoing messages, and some session state to
- * ensure that we can preserve the lossless, ordered delivery of
- * messages in the case of a TCP disconnect.
- */
-struct ceph_connection {
-	void *private;
-	atomic_t nref;
-
-	const struct ceph_connection_operations *ops;
-
-	struct ceph_messenger *msgr;
-	struct socket *sock;
-	unsigned long state;	/* connection state (see flags above) */
-	const char *error_msg;  /* error message, if any */
-
-	struct ceph_entity_addr peer_addr; /* peer address */
-	struct ceph_entity_name peer_name; /* peer name */
-	struct ceph_entity_addr peer_addr_for_me;
-	unsigned peer_features;
-	u32 connect_seq;      /* identify the most recent connection
-				 attempt for this connection, client */
-	u32 peer_global_seq;  /* peer's global seq for this connection */
-
-	int auth_retry;       /* true if we need a newer authorizer */
-	void *auth_reply_buf;   /* where to put the authorizer reply */
-	int auth_reply_buf_len;
-
-	struct mutex mutex;
-
-	/* out queue */
-	struct list_head out_queue;
-	struct list_head out_sent;   /* sending or sent but unacked */
-	u64 out_seq;		     /* last message queued for send */
-
-	u64 in_seq, in_seq_acked;  /* last message received, acked */
-
-	/* connection negotiation temps */
-	char in_banner[CEPH_BANNER_MAX_LEN];
-	union {
-		struct {  /* outgoing connection */
-			struct ceph_msg_connect out_connect;
-			struct ceph_msg_connect_reply in_reply;
-		};
-		struct {  /* incoming */
-			struct ceph_msg_connect in_connect;
-			struct ceph_msg_connect_reply out_reply;
-		};
-	};
-	struct ceph_entity_addr actual_peer_addr;
-
-	/* message out temps */
-	struct ceph_msg *out_msg;        /* sending message (== tail of
-					    out_sent) */
-	bool out_msg_done;
-	struct ceph_msg_pos out_msg_pos;
-
-	struct kvec out_kvec[8],         /* sending header/footer data */
-		*out_kvec_cur;
-	int out_kvec_left;   /* kvec's left in out_kvec */
-	int out_skip;        /* skip this many bytes */
-	int out_kvec_bytes;  /* total bytes left */
-	bool out_kvec_is_msg; /* kvec refers to out_msg */
-	int out_more;        /* there is more data after the kvecs */
-	__le64 out_temp_ack; /* for writing an ack */
-
-	/* message in temps */
-	struct ceph_msg_header in_hdr;
-	struct ceph_msg *in_msg;
-	struct ceph_msg_pos in_msg_pos;
-	u32 in_front_crc, in_middle_crc, in_data_crc;  /* calculated crc */
-
-	char in_tag;         /* protocol control byte */
-	int in_base_pos;     /* bytes read */
-	__le64 in_temp_ack;  /* for reading an ack */
-
-	struct delayed_work work;	    /* send|recv work */
-	unsigned long       delay;          /* current delay interval */
-};
-
-
-extern const char *ceph_pr_addr(const struct sockaddr_storage *ss);
-extern int ceph_parse_ips(const char *c, const char *end,
-			  struct ceph_entity_addr *addr,
-			  int max_count, int *count);
-
-
-extern int ceph_msgr_init(void);
-extern void ceph_msgr_exit(void);
-extern void ceph_msgr_flush(void);
-
-extern struct ceph_messenger *ceph_messenger_create(
-	struct ceph_entity_addr *myaddr,
-	u32 features, u32 required);
-extern void ceph_messenger_destroy(struct ceph_messenger *);
-
-extern void ceph_con_init(struct ceph_messenger *msgr,
-			  struct ceph_connection *con);
-extern void ceph_con_open(struct ceph_connection *con,
-			  struct ceph_entity_addr *addr);
-extern bool ceph_con_opened(struct ceph_connection *con);
-extern void ceph_con_close(struct ceph_connection *con);
-extern void ceph_con_send(struct ceph_connection *con, struct ceph_msg *msg);
-extern void ceph_con_revoke(struct ceph_connection *con, struct ceph_msg *msg);
-extern void ceph_con_revoke_message(struct ceph_connection *con,
-				  struct ceph_msg *msg);
-extern void ceph_con_keepalive(struct ceph_connection *con);
-extern struct ceph_connection *ceph_con_get(struct ceph_connection *con);
-extern void ceph_con_put(struct ceph_connection *con);
-
-extern struct ceph_msg *ceph_msg_new(int type, int front_len, gfp_t flags,
-				     bool can_fail);
-extern void ceph_msg_kfree(struct ceph_msg *m);
-
-
-static inline struct ceph_msg *ceph_msg_get(struct ceph_msg *msg)
-{
-	kref_get(&msg->kref);
-	return msg;
-}
-extern void ceph_msg_last_put(struct kref *kref);
-static inline void ceph_msg_put(struct ceph_msg *msg)
-{
-	kref_put(&msg->kref, ceph_msg_last_put);
-}
-
-extern void ceph_msg_dump(struct ceph_msg *msg);
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/ceph/mon_client.h b/ANDROID_3.4.5/include/linux/ceph/mon_client.h
deleted file mode 100644
index 545f8591..00000000
--- a/ANDROID_3.4.5/include/linux/ceph/mon_client.h
+++ /dev/null
@@ -1,122 +0,0 @@
-#ifndef _FS_CEPH_MON_CLIENT_H
-#define _FS_CEPH_MON_CLIENT_H
-
-#include <linux/completion.h>
-#include <linux/kref.h>
-#include <linux/rbtree.h>
-
-#include "messenger.h"
-
-struct ceph_client;
-struct ceph_mount_args;
-struct ceph_auth_client;
-
-/*
- * The monitor map enumerates the set of all monitors.
- */
-struct ceph_monmap {
-	struct ceph_fsid fsid;
-	u32 epoch;
-	u32 num_mon;
-	struct ceph_entity_inst mon_inst[0];
-};
-
-struct ceph_mon_client;
-struct ceph_mon_generic_request;
-
-
-/*
- * Generic mechanism for resending monitor requests.
- */
-typedef void (*ceph_monc_request_func_t)(struct ceph_mon_client *monc,
-					 int newmon);
-
-/* a pending monitor request */
-struct ceph_mon_request {
-	struct ceph_mon_client *monc;
-	struct delayed_work delayed_work;
-	unsigned long delay;
-	ceph_monc_request_func_t do_request;
-};
-
-/*
- * ceph_mon_generic_request is being used for the statfs and poolop requests
- * which are bening done a bit differently because we need to get data back
- * to the caller
- */
-struct ceph_mon_generic_request {
-	struct kref kref;
-	u64 tid;
-	struct rb_node node;
-	int result;
-	void *buf;
-	int buf_len;
-	struct completion completion;
-	struct ceph_msg *request;  /* original request */
-	struct ceph_msg *reply;    /* and reply */
-};
-
-struct ceph_mon_client {
-	struct ceph_client *client;
-	struct ceph_monmap *monmap;
-
-	struct mutex mutex;
-	struct delayed_work delayed_work;
-
-	struct ceph_auth_client *auth;
-	struct ceph_msg *m_auth, *m_auth_reply, *m_subscribe, *m_subscribe_ack;
-	int pending_auth;
-
-	bool hunting;
-	int cur_mon;                       /* last monitor i contacted */
-	unsigned long sub_sent, sub_renew_after;
-	struct ceph_connection *con;
-	bool have_fsid;
-
-	/* pending generic requests */
-	struct rb_root generic_request_tree;
-	int num_generic_requests;
-	u64 last_tid;
-
-	/* mds/osd map */
-	int want_mdsmap;
-	int want_next_osdmap; /* 1 = want, 2 = want+asked */
-	u32 have_osdmap, have_mdsmap;
-
-#ifdef CONFIG_DEBUG_FS
-	struct dentry *debugfs_file;
-#endif
-};
-
-extern struct ceph_monmap *ceph_monmap_decode(void *p, void *end);
-extern int ceph_monmap_contains(struct ceph_monmap *m,
-				struct ceph_entity_addr *addr);
-
-extern int ceph_monc_init(struct ceph_mon_client *monc, struct ceph_client *cl);
-extern void ceph_monc_stop(struct ceph_mon_client *monc);
-
-/*
- * The model here is to indicate that we need a new map of at least
- * epoch @want, and also call in when we receive a map.  We will
- * periodically rerequest the map from the monitor cluster until we
- * get what we want.
- */
-extern int ceph_monc_got_mdsmap(struct ceph_mon_client *monc, u32 have);
-extern int ceph_monc_got_osdmap(struct ceph_mon_client *monc, u32 have);
-
-extern void ceph_monc_request_next_osdmap(struct ceph_mon_client *monc);
-
-extern int ceph_monc_do_statfs(struct ceph_mon_client *monc,
-			       struct ceph_statfs *buf);
-
-extern int ceph_monc_open_session(struct ceph_mon_client *monc);
-
-extern int ceph_monc_validate_auth(struct ceph_mon_client *monc);
-
-extern int ceph_monc_create_snapid(struct ceph_mon_client *monc,
-				   u32 pool, u64 *snapid);
-
-extern int ceph_monc_delete_snapid(struct ceph_mon_client *monc,
-				   u32 pool, u64 snapid);
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/ceph/msgpool.h b/ANDROID_3.4.5/include/linux/ceph/msgpool.h
deleted file mode 100644
index a362605f..00000000
--- a/ANDROID_3.4.5/include/linux/ceph/msgpool.h
+++ /dev/null
@@ -1,25 +0,0 @@
-#ifndef _FS_CEPH_MSGPOOL
-#define _FS_CEPH_MSGPOOL
-
-#include <linux/mempool.h>
-#include "messenger.h"
-
-/*
- * we use memory pools for preallocating messages we may receive, to
- * avoid unexpected OOM conditions.
- */
-struct ceph_msgpool {
-	const char *name;
-	mempool_t *pool;
-	int front_len;          /* preallocated payload size */
-};
-
-extern int ceph_msgpool_init(struct ceph_msgpool *pool,
-			     int front_len, int size, bool blocking,
-			     const char *name);
-extern void ceph_msgpool_destroy(struct ceph_msgpool *pool);
-extern struct ceph_msg *ceph_msgpool_get(struct ceph_msgpool *,
-					 int front_len);
-extern void ceph_msgpool_put(struct ceph_msgpool *, struct ceph_msg *);
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/ceph/msgr.h b/ANDROID_3.4.5/include/linux/ceph/msgr.h
deleted file mode 100644
index 680d3d64..00000000
--- a/ANDROID_3.4.5/include/linux/ceph/msgr.h
+++ /dev/null
@@ -1,175 +0,0 @@
-#ifndef CEPH_MSGR_H
-#define CEPH_MSGR_H
-
-/*
- * Data types for message passing layer used by Ceph.
- */
-
-#define CEPH_MON_PORT    6789  /* default monitor port */
-
-/*
- * client-side processes will try to bind to ports in this
- * range, simply for the benefit of tools like nmap or wireshark
- * that would like to identify the protocol.
- */
-#define CEPH_PORT_FIRST  6789
-#define CEPH_PORT_START  6800  /* non-monitors start here */
-#define CEPH_PORT_LAST   6900
-
-/*
- * tcp connection banner.  include a protocol version. and adjust
- * whenever the wire protocol changes.  try to keep this string length
- * constant.
- */
-#define CEPH_BANNER "ceph v027"
-#define CEPH_BANNER_MAX_LEN 30
-
-
-/*
- * Rollover-safe type and comparator for 32-bit sequence numbers.
- * Comparator returns -1, 0, or 1.
- */
-typedef __u32 ceph_seq_t;
-
-static inline __s32 ceph_seq_cmp(__u32 a, __u32 b)
-{
-       return (__s32)a - (__s32)b;
-}
-
-
-/*
- * entity_name -- logical name for a process participating in the
- * network, e.g. 'mds0' or 'osd3'.
- */
-struct ceph_entity_name {
-	__u8 type;      /* CEPH_ENTITY_TYPE_* */
-	__le64 num;
-} __attribute__ ((packed));
-
-#define CEPH_ENTITY_TYPE_MON    0x01
-#define CEPH_ENTITY_TYPE_MDS    0x02
-#define CEPH_ENTITY_TYPE_OSD    0x04
-#define CEPH_ENTITY_TYPE_CLIENT 0x08
-#define CEPH_ENTITY_TYPE_AUTH   0x20
-
-#define CEPH_ENTITY_TYPE_ANY    0xFF
-
-extern const char *ceph_entity_type_name(int type);
-
-/*
- * entity_addr -- network address
- */
-struct ceph_entity_addr {
-	__le32 type;
-	__le32 nonce;  /* unique id for process (e.g. pid) */
-	struct sockaddr_storage in_addr;
-} __attribute__ ((packed));
-
-struct ceph_entity_inst {
-	struct ceph_entity_name name;
-	struct ceph_entity_addr addr;
-} __attribute__ ((packed));
-
-
-/* used by message exchange protocol */
-#define CEPH_MSGR_TAG_READY         1  /* server->client: ready for messages */
-#define CEPH_MSGR_TAG_RESETSESSION  2  /* server->client: reset, try again */
-#define CEPH_MSGR_TAG_WAIT          3  /* server->client: wait for racing
-					  incoming connection */
-#define CEPH_MSGR_TAG_RETRY_SESSION 4  /* server->client + cseq: try again
-					  with higher cseq */
-#define CEPH_MSGR_TAG_RETRY_GLOBAL  5  /* server->client + gseq: try again
-					  with higher gseq */
-#define CEPH_MSGR_TAG_CLOSE         6  /* closing pipe */
-#define CEPH_MSGR_TAG_MSG           7  /* message */
-#define CEPH_MSGR_TAG_ACK           8  /* message ack */
-#define CEPH_MSGR_TAG_KEEPALIVE     9  /* just a keepalive byte! */
-#define CEPH_MSGR_TAG_BADPROTOVER  10  /* bad protocol version */
-#define CEPH_MSGR_TAG_BADAUTHORIZER 11 /* bad authorizer */
-#define CEPH_MSGR_TAG_FEATURES      12 /* insufficient features */
-
-
-/*
- * connection negotiation
- */
-struct ceph_msg_connect {
-	__le64 features;     /* supported feature bits */
-	__le32 host_type;    /* CEPH_ENTITY_TYPE_* */
-	__le32 global_seq;   /* count connections initiated by this host */
-	__le32 connect_seq;  /* count connections initiated in this session */
-	__le32 protocol_version;
-	__le32 authorizer_protocol;
-	__le32 authorizer_len;
-	__u8  flags;         /* CEPH_MSG_CONNECT_* */
-} __attribute__ ((packed));
-
-struct ceph_msg_connect_reply {
-	__u8 tag;
-	__le64 features;     /* feature bits for this session */
-	__le32 global_seq;
-	__le32 connect_seq;
-	__le32 protocol_version;
-	__le32 authorizer_len;
-	__u8 flags;
-} __attribute__ ((packed));
-
-#define CEPH_MSG_CONNECT_LOSSY  1  /* messages i send may be safely dropped */
-
-
-/*
- * message header
- */
-struct ceph_msg_header_old {
-	__le64 seq;       /* message seq# for this session */
-	__le64 tid;       /* transaction id */
-	__le16 type;      /* message type */
-	__le16 priority;  /* priority.  higher value == higher priority */
-	__le16 version;   /* version of message encoding */
-
-	__le32 front_len; /* bytes in main payload */
-	__le32 middle_len;/* bytes in middle payload */
-	__le32 data_len;  /* bytes of data payload */
-	__le16 data_off;  /* sender: include full offset;
-			     receiver: mask against ~PAGE_MASK */
-
-	struct ceph_entity_inst src, orig_src;
-	__le32 reserved;
-	__le32 crc;       /* header crc32c */
-} __attribute__ ((packed));
-
-struct ceph_msg_header {
-	__le64 seq;       /* message seq# for this session */
-	__le64 tid;       /* transaction id */
-	__le16 type;      /* message type */
-	__le16 priority;  /* priority.  higher value == higher priority */
-	__le16 version;   /* version of message encoding */
-
-	__le32 front_len; /* bytes in main payload */
-	__le32 middle_len;/* bytes in middle payload */
-	__le32 data_len;  /* bytes of data payload */
-	__le16 data_off;  /* sender: include full offset;
-			     receiver: mask against ~PAGE_MASK */
-
-	struct ceph_entity_name src;
-	__le32 reserved;
-	__le32 crc;       /* header crc32c */
-} __attribute__ ((packed));
-
-#define CEPH_MSG_PRIO_LOW     64
-#define CEPH_MSG_PRIO_DEFAULT 127
-#define CEPH_MSG_PRIO_HIGH    196
-#define CEPH_MSG_PRIO_HIGHEST 255
-
-/*
- * follows data payload
- */
-struct ceph_msg_footer {
-	__le32 front_crc, middle_crc, data_crc;
-	__u8 flags;
-} __attribute__ ((packed));
-
-#define CEPH_MSG_FOOTER_COMPLETE  (1<<0)   /* msg wasn't aborted */
-#define CEPH_MSG_FOOTER_NOCRC     (1<<1)   /* no data crc */
-
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/ceph/osd_client.h b/ANDROID_3.4.5/include/linux/ceph/osd_client.h
deleted file mode 100644
index 7c05ac20..00000000
--- a/ANDROID_3.4.5/include/linux/ceph/osd_client.h
+++ /dev/null
@@ -1,296 +0,0 @@
-#ifndef _FS_CEPH_OSD_CLIENT_H
-#define _FS_CEPH_OSD_CLIENT_H
-
-#include <linux/completion.h>
-#include <linux/kref.h>
-#include <linux/mempool.h>
-#include <linux/rbtree.h>
-
-#include "types.h"
-#include "osdmap.h"
-#include "messenger.h"
-
-/* 
- * Maximum object name size 
- * (must be at least as big as RBD_MAX_MD_NAME_LEN -- currently 100) 
- */
-#define MAX_OBJ_NAME_SIZE 100
-
-struct ceph_msg;
-struct ceph_snap_context;
-struct ceph_osd_request;
-struct ceph_osd_client;
-struct ceph_authorizer;
-struct ceph_pagelist;
-
-/*
- * completion callback for async writepages
- */
-typedef void (*ceph_osdc_callback_t)(struct ceph_osd_request *,
-				     struct ceph_msg *);
-
-/* a given osd we're communicating with */
-struct ceph_osd {
-	atomic_t o_ref;
-	struct ceph_osd_client *o_osdc;
-	int o_osd;
-	int o_incarnation;
-	struct rb_node o_node;
-	struct ceph_connection o_con;
-	struct list_head o_requests;
-	struct list_head o_linger_requests;
-	struct list_head o_osd_lru;
-	struct ceph_authorizer *o_authorizer;
-	void *o_authorizer_buf, *o_authorizer_reply_buf;
-	size_t o_authorizer_buf_len, o_authorizer_reply_buf_len;
-	unsigned long lru_ttl;
-	int o_marked_for_keepalive;
-	struct list_head o_keepalive_item;
-};
-
-/* an in-flight request */
-struct ceph_osd_request {
-	u64             r_tid;              /* unique for this client */
-	struct rb_node  r_node;
-	struct list_head r_req_lru_item;
-	struct list_head r_osd_item;
-	struct list_head r_linger_item;
-	struct list_head r_linger_osd;
-	struct ceph_osd *r_osd;
-	struct ceph_pg   r_pgid;
-	int              r_pg_osds[CEPH_PG_MAX_SIZE];
-	int              r_num_pg_osds;
-
-	struct ceph_connection *r_con_filling_msg;
-
-	struct ceph_msg  *r_request, *r_reply;
-	int               r_result;
-	int               r_flags;     /* any additional flags for the osd */
-	u32               r_sent;      /* >0 if r_request is sending/sent */
-	int               r_got_reply;
-	int		  r_linger;
-
-	struct ceph_osd_client *r_osdc;
-	struct kref       r_kref;
-	bool              r_mempool;
-	struct completion r_completion, r_safe_completion;
-	ceph_osdc_callback_t r_callback, r_safe_callback;
-	struct ceph_eversion r_reassert_version;
-	struct list_head  r_unsafe_item;
-
-	struct inode *r_inode;         	      /* for use by callbacks */
-	void *r_priv;			      /* ditto */
-
-	char              r_oid[MAX_OBJ_NAME_SIZE];          /* object name */
-	int               r_oid_len;
-	unsigned long     r_stamp;            /* send OR check time */
-
-	struct ceph_file_layout r_file_layout;
-	struct ceph_snap_context *r_snapc;    /* snap context for writes */
-	unsigned          r_num_pages;        /* size of page array (follows) */
-	unsigned          r_page_alignment;   /* io offset in first page */
-	struct page     **r_pages;            /* pages for data payload */
-	int               r_pages_from_pool;
-	int               r_own_pages;        /* if true, i own page list */
-#ifdef CONFIG_BLOCK
-	struct bio       *r_bio;	      /* instead of pages */
-#endif
-
-	struct ceph_pagelist *r_trail;	      /* trailing part of the data */
-};
-
-struct ceph_osd_event {
-	u64 cookie;
-	int one_shot;
-	struct ceph_osd_client *osdc;
-	void (*cb)(u64, u64, u8, void *);
-	void *data;
-	struct rb_node node;
-	struct list_head osd_node;
-	struct kref kref;
-	struct completion completion;
-};
-
-struct ceph_osd_event_work {
-	struct work_struct work;
-	struct ceph_osd_event *event;
-        u64 ver;
-        u64 notify_id;
-        u8 opcode;
-};
-
-struct ceph_osd_client {
-	struct ceph_client     *client;
-
-	struct ceph_osdmap     *osdmap;       /* current map */
-	struct rw_semaphore    map_sem;
-	struct completion      map_waiters;
-	u64                    last_requested_map;
-
-	struct mutex           request_mutex;
-	struct rb_root         osds;          /* osds */
-	struct list_head       osd_lru;       /* idle osds */
-	u64                    timeout_tid;   /* tid of timeout triggering rq */
-	u64                    last_tid;      /* tid of last request */
-	struct rb_root         requests;      /* pending requests */
-	struct list_head       req_lru;	      /* in-flight lru */
-	struct list_head       req_unsent;    /* unsent/need-resend queue */
-	struct list_head       req_notarget;  /* map to no osd */
-	struct list_head       req_linger;    /* lingering requests */
-	int                    num_requests;
-	struct delayed_work    timeout_work;
-	struct delayed_work    osds_timeout_work;
-#ifdef CONFIG_DEBUG_FS
-	struct dentry 	       *debugfs_file;
-#endif
-
-	mempool_t              *req_mempool;
-
-	struct ceph_msgpool	msgpool_op;
-	struct ceph_msgpool	msgpool_op_reply;
-
-	spinlock_t		event_lock;
-	struct rb_root		event_tree;
-	u64			event_count;
-
-	struct workqueue_struct	*notify_wq;
-};
-
-struct ceph_osd_req_op {
-	u16 op;           /* CEPH_OSD_OP_* */
-	u32 flags;        /* CEPH_OSD_FLAG_* */
-	union {
-		struct {
-			u64 offset, length;
-			u64 truncate_size;
-			u32 truncate_seq;
-		} extent;
-		struct {
-			const char *name;
-			u32 name_len;
-			const char  *val;
-			u32 value_len;
-			__u8 cmp_op;       /* CEPH_OSD_CMPXATTR_OP_* */
-			__u8 cmp_mode;     /* CEPH_OSD_CMPXATTR_MODE_* */
-		} xattr;
-		struct {
-			const char *class_name;
-			__u8 class_len;
-			const char *method_name;
-			__u8 method_len;
-			__u8 argc;
-			const char *indata;
-			u32 indata_len;
-		} cls;
-		struct {
-			u64 cookie, count;
-		} pgls;
-	        struct {
-		        u64 snapid;
-	        } snap;
-		struct {
-			u64 cookie;
-			u64 ver;
-			__u8 flag;
-			u32 prot_ver;
-			u32 timeout;
-		} watch;
-	};
-	u32 payload_len;
-};
-
-extern int ceph_osdc_init(struct ceph_osd_client *osdc,
-			  struct ceph_client *client);
-extern void ceph_osdc_stop(struct ceph_osd_client *osdc);
-
-extern void ceph_osdc_handle_reply(struct ceph_osd_client *osdc,
-				   struct ceph_msg *msg);
-extern void ceph_osdc_handle_map(struct ceph_osd_client *osdc,
-				 struct ceph_msg *msg);
-
-extern void ceph_calc_raw_layout(struct ceph_osd_client *osdc,
-			struct ceph_file_layout *layout,
-			u64 snapid,
-			u64 off, u64 *plen, u64 *bno,
-			struct ceph_osd_request *req,
-			struct ceph_osd_req_op *op);
-
-extern struct ceph_osd_request *ceph_osdc_alloc_request(struct ceph_osd_client *osdc,
-					       int flags,
-					       struct ceph_snap_context *snapc,
-					       struct ceph_osd_req_op *ops,
-					       bool use_mempool,
-					       gfp_t gfp_flags,
-					       struct page **pages,
-					       struct bio *bio);
-
-extern void ceph_osdc_build_request(struct ceph_osd_request *req,
-				    u64 off, u64 *plen,
-				    struct ceph_osd_req_op *src_ops,
-				    struct ceph_snap_context *snapc,
-				    struct timespec *mtime,
-				    const char *oid,
-				    int oid_len);
-
-extern struct ceph_osd_request *ceph_osdc_new_request(struct ceph_osd_client *,
-				      struct ceph_file_layout *layout,
-				      struct ceph_vino vino,
-				      u64 offset, u64 *len, int op, int flags,
-				      struct ceph_snap_context *snapc,
-				      int do_sync, u32 truncate_seq,
-				      u64 truncate_size,
-				      struct timespec *mtime,
-				      bool use_mempool, int num_reply,
-				      int page_align);
-
-extern void ceph_osdc_set_request_linger(struct ceph_osd_client *osdc,
-					 struct ceph_osd_request *req);
-extern void ceph_osdc_unregister_linger_request(struct ceph_osd_client *osdc,
-						struct ceph_osd_request *req);
-
-static inline void ceph_osdc_get_request(struct ceph_osd_request *req)
-{
-	kref_get(&req->r_kref);
-}
-extern void ceph_osdc_release_request(struct kref *kref);
-static inline void ceph_osdc_put_request(struct ceph_osd_request *req)
-{
-	kref_put(&req->r_kref, ceph_osdc_release_request);
-}
-
-extern int ceph_osdc_start_request(struct ceph_osd_client *osdc,
-				   struct ceph_osd_request *req,
-				   bool nofail);
-extern int ceph_osdc_wait_request(struct ceph_osd_client *osdc,
-				  struct ceph_osd_request *req);
-extern void ceph_osdc_sync(struct ceph_osd_client *osdc);
-
-extern int ceph_osdc_readpages(struct ceph_osd_client *osdc,
-			       struct ceph_vino vino,
-			       struct ceph_file_layout *layout,
-			       u64 off, u64 *plen,
-			       u32 truncate_seq, u64 truncate_size,
-			       struct page **pages, int nr_pages,
-			       int page_align);
-
-extern int ceph_osdc_writepages(struct ceph_osd_client *osdc,
-				struct ceph_vino vino,
-				struct ceph_file_layout *layout,
-				struct ceph_snap_context *sc,
-				u64 off, u64 len,
-				u32 truncate_seq, u64 truncate_size,
-				struct timespec *mtime,
-				struct page **pages, int nr_pages,
-				int flags, int do_sync, bool nofail);
-
-/* watch/notify events */
-extern int ceph_osdc_create_event(struct ceph_osd_client *osdc,
-				  void (*event_cb)(u64, u64, u8, void *),
-				  int one_shot, void *data,
-				  struct ceph_osd_event **pevent);
-extern void ceph_osdc_cancel_event(struct ceph_osd_event *event);
-extern int ceph_osdc_wait_event(struct ceph_osd_event *event,
-				unsigned long timeout);
-extern void ceph_osdc_put_event(struct ceph_osd_event *event);
-#endif
-
diff --git a/ANDROID_3.4.5/include/linux/ceph/osdmap.h b/ANDROID_3.4.5/include/linux/ceph/osdmap.h
deleted file mode 100644
index ba4c205c..00000000
--- a/ANDROID_3.4.5/include/linux/ceph/osdmap.h
+++ /dev/null
@@ -1,130 +0,0 @@
-#ifndef _FS_CEPH_OSDMAP_H
-#define _FS_CEPH_OSDMAP_H
-
-#include <linux/rbtree.h>
-#include "types.h"
-#include "ceph_fs.h"
-#include <linux/crush/crush.h>
-
-/*
- * The osd map describes the current membership of the osd cluster and
- * specifies the mapping of objects to placement groups and placement
- * groups to (sets of) osds.  That is, it completely specifies the
- * (desired) distribution of all data objects in the system at some
- * point in time.
- *
- * Each map version is identified by an epoch, which increases monotonically.
- *
- * The map can be updated either via an incremental map (diff) describing
- * the change between two successive epochs, or as a fully encoded map.
- */
-struct ceph_pg_pool_info {
-	struct rb_node node;
-	int id;
-	struct ceph_pg_pool v;
-	int pg_num_mask, pgp_num_mask, lpg_num_mask, lpgp_num_mask;
-	char *name;
-};
-
-struct ceph_pg_mapping {
-	struct rb_node node;
-	struct ceph_pg pgid;
-	int len;
-	int osds[];
-};
-
-struct ceph_osdmap {
-	struct ceph_fsid fsid;
-	u32 epoch;
-	u32 mkfs_epoch;
-	struct ceph_timespec created, modified;
-
-	u32 flags;         /* CEPH_OSDMAP_* */
-
-	u32 max_osd;       /* size of osd_state, _offload, _addr arrays */
-	u8 *osd_state;     /* CEPH_OSD_* */
-	u32 *osd_weight;   /* 0 = failed, 0x10000 = 100% normal */
-	struct ceph_entity_addr *osd_addr;
-
-	struct rb_root pg_temp;
-	struct rb_root pg_pools;
-	u32 pool_max;
-
-	/* the CRUSH map specifies the mapping of placement groups to
-	 * the list of osds that store+replicate them. */
-	struct crush_map *crush;
-};
-
-/*
- * file layout helpers
- */
-#define ceph_file_layout_su(l) ((__s32)le32_to_cpu((l).fl_stripe_unit))
-#define ceph_file_layout_stripe_count(l) \
-	((__s32)le32_to_cpu((l).fl_stripe_count))
-#define ceph_file_layout_object_size(l) ((__s32)le32_to_cpu((l).fl_object_size))
-#define ceph_file_layout_cas_hash(l) ((__s32)le32_to_cpu((l).fl_cas_hash))
-#define ceph_file_layout_object_su(l) \
-	((__s32)le32_to_cpu((l).fl_object_stripe_unit))
-#define ceph_file_layout_pg_preferred(l) \
-	((__s32)le32_to_cpu((l).fl_pg_preferred))
-#define ceph_file_layout_pg_pool(l) \
-	((__s32)le32_to_cpu((l).fl_pg_pool))
-
-static inline unsigned ceph_file_layout_stripe_width(struct ceph_file_layout *l)
-{
-	return le32_to_cpu(l->fl_stripe_unit) *
-		le32_to_cpu(l->fl_stripe_count);
-}
-
-/* "period" == bytes before i start on a new set of objects */
-static inline unsigned ceph_file_layout_period(struct ceph_file_layout *l)
-{
-	return le32_to_cpu(l->fl_object_size) *
-		le32_to_cpu(l->fl_stripe_count);
-}
-
-
-static inline int ceph_osd_is_up(struct ceph_osdmap *map, int osd)
-{
-	return (osd < map->max_osd) && (map->osd_state[osd] & CEPH_OSD_UP);
-}
-
-static inline bool ceph_osdmap_flag(struct ceph_osdmap *map, int flag)
-{
-	return map && (map->flags & flag);
-}
-
-extern char *ceph_osdmap_state_str(char *str, int len, int state);
-
-static inline struct ceph_entity_addr *ceph_osd_addr(struct ceph_osdmap *map,
-						     int osd)
-{
-	if (osd >= map->max_osd)
-		return NULL;
-	return &map->osd_addr[osd];
-}
-
-extern struct ceph_osdmap *osdmap_decode(void **p, void *end);
-extern struct ceph_osdmap *osdmap_apply_incremental(void **p, void *end,
-					    struct ceph_osdmap *map,
-					    struct ceph_messenger *msgr);
-extern void ceph_osdmap_destroy(struct ceph_osdmap *map);
-
-/* calculate mapping of a file extent to an object */
-extern void ceph_calc_file_object_mapping(struct ceph_file_layout *layout,
-					  u64 off, u64 *plen,
-					  u64 *bno, u64 *oxoff, u64 *oxlen);
-
-/* calculate mapping of object to a placement group */
-extern int ceph_calc_object_layout(struct ceph_object_layout *ol,
-				   const char *oid,
-				   struct ceph_file_layout *fl,
-				   struct ceph_osdmap *osdmap);
-extern int ceph_calc_pg_acting(struct ceph_osdmap *osdmap, struct ceph_pg pgid,
-			       int *acting);
-extern int ceph_calc_pg_primary(struct ceph_osdmap *osdmap,
-				struct ceph_pg pgid);
-
-extern int ceph_pg_poolid_by_name(struct ceph_osdmap *map, const char *name);
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/ceph/pagelist.h b/ANDROID_3.4.5/include/linux/ceph/pagelist.h
deleted file mode 100644
index 9660d6b0..00000000
--- a/ANDROID_3.4.5/include/linux/ceph/pagelist.h
+++ /dev/null
@@ -1,75 +0,0 @@
-#ifndef __FS_CEPH_PAGELIST_H
-#define __FS_CEPH_PAGELIST_H
-
-#include <linux/list.h>
-
-struct ceph_pagelist {
-	struct list_head head;
-	void *mapped_tail;
-	size_t length;
-	size_t room;
-	struct list_head free_list;
-	size_t num_pages_free;
-};
-
-struct ceph_pagelist_cursor {
-	struct ceph_pagelist *pl;   /* pagelist, for error checking */
-	struct list_head *page_lru; /* page in list */
-	size_t room;		    /* room remaining to reset to */
-};
-
-static inline void ceph_pagelist_init(struct ceph_pagelist *pl)
-{
-	INIT_LIST_HEAD(&pl->head);
-	pl->mapped_tail = NULL;
-	pl->length = 0;
-	pl->room = 0;
-	INIT_LIST_HEAD(&pl->free_list);
-	pl->num_pages_free = 0;
-}
-
-extern int ceph_pagelist_release(struct ceph_pagelist *pl);
-
-extern int ceph_pagelist_append(struct ceph_pagelist *pl, const void *d, size_t l);
-
-extern int ceph_pagelist_reserve(struct ceph_pagelist *pl, size_t space);
-
-extern int ceph_pagelist_free_reserve(struct ceph_pagelist *pl);
-
-extern void ceph_pagelist_set_cursor(struct ceph_pagelist *pl,
-				     struct ceph_pagelist_cursor *c);
-
-extern int ceph_pagelist_truncate(struct ceph_pagelist *pl,
-				  struct ceph_pagelist_cursor *c);
-
-static inline int ceph_pagelist_encode_64(struct ceph_pagelist *pl, u64 v)
-{
-	__le64 ev = cpu_to_le64(v);
-	return ceph_pagelist_append(pl, &ev, sizeof(ev));
-}
-static inline int ceph_pagelist_encode_32(struct ceph_pagelist *pl, u32 v)
-{
-	__le32 ev = cpu_to_le32(v);
-	return ceph_pagelist_append(pl, &ev, sizeof(ev));
-}
-static inline int ceph_pagelist_encode_16(struct ceph_pagelist *pl, u16 v)
-{
-	__le16 ev = cpu_to_le16(v);
-	return ceph_pagelist_append(pl, &ev, sizeof(ev));
-}
-static inline int ceph_pagelist_encode_8(struct ceph_pagelist *pl, u8 v)
-{
-	return ceph_pagelist_append(pl, &v, 1);
-}
-static inline int ceph_pagelist_encode_string(struct ceph_pagelist *pl,
-					      char *s, size_t len)
-{
-	int ret = ceph_pagelist_encode_32(pl, len);
-	if (ret)
-		return ret;
-	if (len)
-		return ceph_pagelist_append(pl, s, len);
-	return 0;
-}
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/ceph/rados.h b/ANDROID_3.4.5/include/linux/ceph/rados.h
deleted file mode 100644
index 0a990998..00000000
--- a/ANDROID_3.4.5/include/linux/ceph/rados.h
+++ /dev/null
@@ -1,426 +0,0 @@
-#ifndef CEPH_RADOS_H
-#define CEPH_RADOS_H
-
-/*
- * Data types for the Ceph distributed object storage layer RADOS
- * (Reliable Autonomic Distributed Object Store).
- */
-
-#include "msgr.h"
-
-/*
- * osdmap encoding versions
- */
-#define CEPH_OSDMAP_INC_VERSION     5
-#define CEPH_OSDMAP_INC_VERSION_EXT 6
-#define CEPH_OSDMAP_VERSION         5
-#define CEPH_OSDMAP_VERSION_EXT     6
-
-/*
- * fs id
- */
-struct ceph_fsid {
-	unsigned char fsid[16];
-};
-
-static inline int ceph_fsid_compare(const struct ceph_fsid *a,
-				    const struct ceph_fsid *b)
-{
-	return memcmp(a, b, sizeof(*a));
-}
-
-/*
- * ino, object, etc.
- */
-typedef __le64 ceph_snapid_t;
-#define CEPH_SNAPDIR ((__u64)(-1))  /* reserved for hidden .snap dir */
-#define CEPH_NOSNAP  ((__u64)(-2))  /* "head", "live" revision */
-#define CEPH_MAXSNAP ((__u64)(-3))  /* largest valid snapid */
-
-struct ceph_timespec {
-	__le32 tv_sec;
-	__le32 tv_nsec;
-} __attribute__ ((packed));
-
-
-/*
- * object layout - how objects are mapped into PGs
- */
-#define CEPH_OBJECT_LAYOUT_HASH     1
-#define CEPH_OBJECT_LAYOUT_LINEAR   2
-#define CEPH_OBJECT_LAYOUT_HASHINO  3
-
-/*
- * pg layout -- how PGs are mapped onto (sets of) OSDs
- */
-#define CEPH_PG_LAYOUT_CRUSH  0
-#define CEPH_PG_LAYOUT_HASH   1
-#define CEPH_PG_LAYOUT_LINEAR 2
-#define CEPH_PG_LAYOUT_HYBRID 3
-
-#define CEPH_PG_MAX_SIZE      16  /* max # osds in a single pg */
-
-/*
- * placement group.
- * we encode this into one __le64.
- */
-struct ceph_pg {
-	__le16 preferred; /* preferred primary osd */
-	__le16 ps;        /* placement seed */
-	__le32 pool;      /* object pool */
-} __attribute__ ((packed));
-
-/*
- * pg_pool is a set of pgs storing a pool of objects
- *
- *  pg_num -- base number of pseudorandomly placed pgs
- *
- *  pgp_num -- effective number when calculating pg placement.  this
- * is used for pg_num increases.  new pgs result in data being "split"
- * into new pgs.  for this to proceed smoothly, new pgs are intiially
- * colocated with their parents; that is, pgp_num doesn't increase
- * until the new pgs have successfully split.  only _then_ are the new
- * pgs placed independently.
- *
- *  lpg_num -- localized pg count (per device).  replicas are randomly
- * selected.
- *
- *  lpgp_num -- as above.
- */
-#define CEPH_PG_TYPE_REP     1
-#define CEPH_PG_TYPE_RAID4   2
-#define CEPH_PG_POOL_VERSION 2
-struct ceph_pg_pool {
-	__u8 type;                /* CEPH_PG_TYPE_* */
-	__u8 size;                /* number of osds in each pg */
-	__u8 crush_ruleset;       /* crush placement rule */
-	__u8 object_hash;         /* hash mapping object name to ps */
-	__le32 pg_num, pgp_num;   /* number of pg's */
-	__le32 lpg_num, lpgp_num; /* number of localized pg's */
-	__le32 last_change;       /* most recent epoch changed */
-	__le64 snap_seq;          /* seq for per-pool snapshot */
-	__le32 snap_epoch;        /* epoch of last snap */
-	__le32 num_snaps;
-	__le32 num_removed_snap_intervals; /* if non-empty, NO per-pool snaps */
-	__le64 auid;               /* who owns the pg */
-} __attribute__ ((packed));
-
-/*
- * stable_mod func is used to control number of placement groups.
- * similar to straight-up modulo, but produces a stable mapping as b
- * increases over time.  b is the number of bins, and bmask is the
- * containing power of 2 minus 1.
- *
- * b <= bmask and bmask=(2**n)-1
- * e.g., b=12 -> bmask=15, b=123 -> bmask=127
- */
-static inline int ceph_stable_mod(int x, int b, int bmask)
-{
-	if ((x & bmask) < b)
-		return x & bmask;
-	else
-		return x & (bmask >> 1);
-}
-
-/*
- * object layout - how a given object should be stored.
- */
-struct ceph_object_layout {
-	struct ceph_pg ol_pgid;   /* raw pg, with _full_ ps precision. */
-	__le32 ol_stripe_unit;    /* for per-object parity, if any */
-} __attribute__ ((packed));
-
-/*
- * compound epoch+version, used by storage layer to serialize mutations
- */
-struct ceph_eversion {
-	__le32 epoch;
-	__le64 version;
-} __attribute__ ((packed));
-
-/*
- * osd map bits
- */
-
-/* status bits */
-#define CEPH_OSD_EXISTS 1
-#define CEPH_OSD_UP     2
-
-/* osd weights.  fixed point value: 0x10000 == 1.0 ("in"), 0 == "out" */
-#define CEPH_OSD_IN  0x10000
-#define CEPH_OSD_OUT 0
-
-
-/*
- * osd map flag bits
- */
-#define CEPH_OSDMAP_NEARFULL (1<<0)  /* sync writes (near ENOSPC) */
-#define CEPH_OSDMAP_FULL     (1<<1)  /* no data writes (ENOSPC) */
-#define CEPH_OSDMAP_PAUSERD  (1<<2)  /* pause all reads */
-#define CEPH_OSDMAP_PAUSEWR  (1<<3)  /* pause all writes */
-#define CEPH_OSDMAP_PAUSEREC (1<<4)  /* pause recovery */
-
-/*
- * osd ops
- */
-#define CEPH_OSD_OP_MODE       0xf000
-#define CEPH_OSD_OP_MODE_RD    0x1000
-#define CEPH_OSD_OP_MODE_WR    0x2000
-#define CEPH_OSD_OP_MODE_RMW   0x3000
-#define CEPH_OSD_OP_MODE_SUB   0x4000
-
-#define CEPH_OSD_OP_TYPE       0x0f00
-#define CEPH_OSD_OP_TYPE_LOCK  0x0100
-#define CEPH_OSD_OP_TYPE_DATA  0x0200
-#define CEPH_OSD_OP_TYPE_ATTR  0x0300
-#define CEPH_OSD_OP_TYPE_EXEC  0x0400
-#define CEPH_OSD_OP_TYPE_PG    0x0500
-
-enum {
-	/** data **/
-	/* read */
-	CEPH_OSD_OP_READ      = CEPH_OSD_OP_MODE_RD | CEPH_OSD_OP_TYPE_DATA | 1,
-	CEPH_OSD_OP_STAT      = CEPH_OSD_OP_MODE_RD | CEPH_OSD_OP_TYPE_DATA | 2,
-	CEPH_OSD_OP_MAPEXT    = CEPH_OSD_OP_MODE_RD | CEPH_OSD_OP_TYPE_DATA | 3,
-
-	/* fancy read */
-	CEPH_OSD_OP_MASKTRUNC   = CEPH_OSD_OP_MODE_RD | CEPH_OSD_OP_TYPE_DATA | 4,
-	CEPH_OSD_OP_SPARSE_READ = CEPH_OSD_OP_MODE_RD | CEPH_OSD_OP_TYPE_DATA | 5,
-
-	CEPH_OSD_OP_NOTIFY    = CEPH_OSD_OP_MODE_RD | CEPH_OSD_OP_TYPE_DATA | 6,
-	CEPH_OSD_OP_NOTIFY_ACK = CEPH_OSD_OP_MODE_RD | CEPH_OSD_OP_TYPE_DATA | 7,
-
-	/* versioning */
-	CEPH_OSD_OP_ASSERT_VER = CEPH_OSD_OP_MODE_RD | CEPH_OSD_OP_TYPE_DATA | 8,
-
-	/* write */
-	CEPH_OSD_OP_WRITE     = CEPH_OSD_OP_MODE_WR | CEPH_OSD_OP_TYPE_DATA | 1,
-	CEPH_OSD_OP_WRITEFULL = CEPH_OSD_OP_MODE_WR | CEPH_OSD_OP_TYPE_DATA | 2,
-	CEPH_OSD_OP_TRUNCATE  = CEPH_OSD_OP_MODE_WR | CEPH_OSD_OP_TYPE_DATA | 3,
-	CEPH_OSD_OP_ZERO      = CEPH_OSD_OP_MODE_WR | CEPH_OSD_OP_TYPE_DATA | 4,
-	CEPH_OSD_OP_DELETE    = CEPH_OSD_OP_MODE_WR | CEPH_OSD_OP_TYPE_DATA | 5,
-
-	/* fancy write */
-	CEPH_OSD_OP_APPEND    = CEPH_OSD_OP_MODE_WR | CEPH_OSD_OP_TYPE_DATA | 6,
-	CEPH_OSD_OP_STARTSYNC = CEPH_OSD_OP_MODE_WR | CEPH_OSD_OP_TYPE_DATA | 7,
-	CEPH_OSD_OP_SETTRUNC  = CEPH_OSD_OP_MODE_WR | CEPH_OSD_OP_TYPE_DATA | 8,
-	CEPH_OSD_OP_TRIMTRUNC = CEPH_OSD_OP_MODE_WR | CEPH_OSD_OP_TYPE_DATA | 9,
-
-	CEPH_OSD_OP_TMAPUP  = CEPH_OSD_OP_MODE_RMW | CEPH_OSD_OP_TYPE_DATA | 10,
-	CEPH_OSD_OP_TMAPPUT = CEPH_OSD_OP_MODE_WR | CEPH_OSD_OP_TYPE_DATA | 11,
-	CEPH_OSD_OP_TMAPGET = CEPH_OSD_OP_MODE_RD | CEPH_OSD_OP_TYPE_DATA | 12,
-
-	CEPH_OSD_OP_CREATE  = CEPH_OSD_OP_MODE_WR | CEPH_OSD_OP_TYPE_DATA | 13,
-	CEPH_OSD_OP_ROLLBACK= CEPH_OSD_OP_MODE_WR | CEPH_OSD_OP_TYPE_DATA | 14,
-
-	CEPH_OSD_OP_WATCH   = CEPH_OSD_OP_MODE_WR | CEPH_OSD_OP_TYPE_DATA | 15,
-
-	/** attrs **/
-	/* read */
-	CEPH_OSD_OP_GETXATTR  = CEPH_OSD_OP_MODE_RD | CEPH_OSD_OP_TYPE_ATTR | 1,
-	CEPH_OSD_OP_GETXATTRS = CEPH_OSD_OP_MODE_RD | CEPH_OSD_OP_TYPE_ATTR | 2,
-	CEPH_OSD_OP_CMPXATTR  = CEPH_OSD_OP_MODE_RD | CEPH_OSD_OP_TYPE_ATTR | 3,
-
-	/* write */
-	CEPH_OSD_OP_SETXATTR  = CEPH_OSD_OP_MODE_WR | CEPH_OSD_OP_TYPE_ATTR | 1,
-	CEPH_OSD_OP_SETXATTRS = CEPH_OSD_OP_MODE_WR | CEPH_OSD_OP_TYPE_ATTR | 2,
-	CEPH_OSD_OP_RESETXATTRS = CEPH_OSD_OP_MODE_WR|CEPH_OSD_OP_TYPE_ATTR | 3,
-	CEPH_OSD_OP_RMXATTR   = CEPH_OSD_OP_MODE_WR | CEPH_OSD_OP_TYPE_ATTR | 4,
-
-	/** subop **/
-	CEPH_OSD_OP_PULL            = CEPH_OSD_OP_MODE_SUB | 1,
-	CEPH_OSD_OP_PUSH            = CEPH_OSD_OP_MODE_SUB | 2,
-	CEPH_OSD_OP_BALANCEREADS    = CEPH_OSD_OP_MODE_SUB | 3,
-	CEPH_OSD_OP_UNBALANCEREADS  = CEPH_OSD_OP_MODE_SUB | 4,
-	CEPH_OSD_OP_SCRUB           = CEPH_OSD_OP_MODE_SUB | 5,
-	CEPH_OSD_OP_SCRUB_RESERVE   = CEPH_OSD_OP_MODE_SUB | 6,
-	CEPH_OSD_OP_SCRUB_UNRESERVE = CEPH_OSD_OP_MODE_SUB | 7,
-	CEPH_OSD_OP_SCRUB_STOP      = CEPH_OSD_OP_MODE_SUB | 8,
-
-	/** lock **/
-	CEPH_OSD_OP_WRLOCK    = CEPH_OSD_OP_MODE_WR | CEPH_OSD_OP_TYPE_LOCK | 1,
-	CEPH_OSD_OP_WRUNLOCK  = CEPH_OSD_OP_MODE_WR | CEPH_OSD_OP_TYPE_LOCK | 2,
-	CEPH_OSD_OP_RDLOCK    = CEPH_OSD_OP_MODE_WR | CEPH_OSD_OP_TYPE_LOCK | 3,
-	CEPH_OSD_OP_RDUNLOCK  = CEPH_OSD_OP_MODE_WR | CEPH_OSD_OP_TYPE_LOCK | 4,
-	CEPH_OSD_OP_UPLOCK    = CEPH_OSD_OP_MODE_WR | CEPH_OSD_OP_TYPE_LOCK | 5,
-	CEPH_OSD_OP_DNLOCK    = CEPH_OSD_OP_MODE_WR | CEPH_OSD_OP_TYPE_LOCK | 6,
-
-	/** exec **/
-	CEPH_OSD_OP_CALL    = CEPH_OSD_OP_MODE_RD | CEPH_OSD_OP_TYPE_EXEC | 1,
-
-	/** pg **/
-	CEPH_OSD_OP_PGLS      = CEPH_OSD_OP_MODE_RD | CEPH_OSD_OP_TYPE_PG | 1,
-};
-
-static inline int ceph_osd_op_type_lock(int op)
-{
-	return (op & CEPH_OSD_OP_TYPE) == CEPH_OSD_OP_TYPE_LOCK;
-}
-static inline int ceph_osd_op_type_data(int op)
-{
-	return (op & CEPH_OSD_OP_TYPE) == CEPH_OSD_OP_TYPE_DATA;
-}
-static inline int ceph_osd_op_type_attr(int op)
-{
-	return (op & CEPH_OSD_OP_TYPE) == CEPH_OSD_OP_TYPE_ATTR;
-}
-static inline int ceph_osd_op_type_exec(int op)
-{
-	return (op & CEPH_OSD_OP_TYPE) == CEPH_OSD_OP_TYPE_EXEC;
-}
-static inline int ceph_osd_op_type_pg(int op)
-{
-	return (op & CEPH_OSD_OP_TYPE) == CEPH_OSD_OP_TYPE_PG;
-}
-
-static inline int ceph_osd_op_mode_subop(int op)
-{
-	return (op & CEPH_OSD_OP_MODE) == CEPH_OSD_OP_MODE_SUB;
-}
-static inline int ceph_osd_op_mode_read(int op)
-{
-	return (op & CEPH_OSD_OP_MODE) == CEPH_OSD_OP_MODE_RD;
-}
-static inline int ceph_osd_op_mode_modify(int op)
-{
-	return (op & CEPH_OSD_OP_MODE) == CEPH_OSD_OP_MODE_WR;
-}
-
-/*
- * note that the following tmap stuff is also defined in the ceph librados.h
- * any modification here needs to be updated there
- */
-#define CEPH_OSD_TMAP_HDR 'h'
-#define CEPH_OSD_TMAP_SET 's'
-#define CEPH_OSD_TMAP_RM  'r'
-
-extern const char *ceph_osd_op_name(int op);
-
-
-/*
- * osd op flags
- *
- * An op may be READ, WRITE, or READ|WRITE.
- */
-enum {
-	CEPH_OSD_FLAG_ACK = 1,          /* want (or is) "ack" ack */
-	CEPH_OSD_FLAG_ONNVRAM = 2,      /* want (or is) "onnvram" ack */
-	CEPH_OSD_FLAG_ONDISK = 4,       /* want (or is) "ondisk" ack */
-	CEPH_OSD_FLAG_RETRY = 8,        /* resend attempt */
-	CEPH_OSD_FLAG_READ = 16,        /* op may read */
-	CEPH_OSD_FLAG_WRITE = 32,       /* op may write */
-	CEPH_OSD_FLAG_ORDERSNAP = 64,   /* EOLDSNAP if snapc is out of order */
-	CEPH_OSD_FLAG_PEERSTAT = 128,   /* msg includes osd_peer_stat */
-	CEPH_OSD_FLAG_BALANCE_READS = 256,
-	CEPH_OSD_FLAG_PARALLELEXEC = 512, /* execute op in parallel */
-	CEPH_OSD_FLAG_PGOP = 1024,      /* pg op, no object */
-	CEPH_OSD_FLAG_EXEC = 2048,      /* op may exec */
-	CEPH_OSD_FLAG_EXEC_PUBLIC = 4096, /* op may exec (public) */
-};
-
-enum {
-	CEPH_OSD_OP_FLAG_EXCL = 1,      /* EXCL object create */
-};
-
-#define EOLDSNAPC    ERESTART  /* ORDERSNAP flag set; writer has old snapc*/
-#define EBLACKLISTED ESHUTDOWN /* blacklisted */
-
-/* xattr comparison */
-enum {
-	CEPH_OSD_CMPXATTR_OP_NOP = 0,
-	CEPH_OSD_CMPXATTR_OP_EQ  = 1,
-	CEPH_OSD_CMPXATTR_OP_NE  = 2,
-	CEPH_OSD_CMPXATTR_OP_GT  = 3,
-	CEPH_OSD_CMPXATTR_OP_GTE = 4,
-	CEPH_OSD_CMPXATTR_OP_LT  = 5,
-	CEPH_OSD_CMPXATTR_OP_LTE = 6
-};
-
-enum {
-	CEPH_OSD_CMPXATTR_MODE_STRING = 1,
-	CEPH_OSD_CMPXATTR_MODE_U64    = 2
-};
-
-#define RADOS_NOTIFY_VER	1
-
-/*
- * an individual object operation.  each may be accompanied by some data
- * payload
- */
-struct ceph_osd_op {
-	__le16 op;           /* CEPH_OSD_OP_* */
-	__le32 flags;        /* CEPH_OSD_FLAG_* */
-	union {
-		struct {
-			__le64 offset, length;
-			__le64 truncate_size;
-			__le32 truncate_seq;
-		} __attribute__ ((packed)) extent;
-		struct {
-			__le32 name_len;
-			__le32 value_len;
-			__u8 cmp_op;       /* CEPH_OSD_CMPXATTR_OP_* */
-			__u8 cmp_mode;     /* CEPH_OSD_CMPXATTR_MODE_* */
-		} __attribute__ ((packed)) xattr;
-		struct {
-			__u8 class_len;
-			__u8 method_len;
-			__u8 argc;
-			__le32 indata_len;
-		} __attribute__ ((packed)) cls;
-		struct {
-			__le64 cookie, count;
-		} __attribute__ ((packed)) pgls;
-	        struct {
-		        __le64 snapid;
-	        } __attribute__ ((packed)) snap;
-		struct {
-			__le64 cookie;
-			__le64 ver;
-			__u8 flag;	/* 0 = unwatch, 1 = watch */
-		} __attribute__ ((packed)) watch;
-};
-	__le32 payload_len;
-} __attribute__ ((packed));
-
-/*
- * osd request message header.  each request may include multiple
- * ceph_osd_op object operations.
- */
-struct ceph_osd_request_head {
-	__le32 client_inc;                 /* client incarnation */
-	struct ceph_object_layout layout;  /* pgid */
-	__le32 osdmap_epoch;               /* client's osdmap epoch */
-
-	__le32 flags;
-
-	struct ceph_timespec mtime;        /* for mutations only */
-	struct ceph_eversion reassert_version; /* if we are replaying op */
-
-	__le32 object_len;     /* length of object name */
-
-	__le64 snapid;         /* snapid to read */
-	__le64 snap_seq;       /* writer's snap context */
-	__le32 num_snaps;
-
-	__le16 num_ops;
-	struct ceph_osd_op ops[];  /* followed by ops[], obj, ticket, snaps */
-} __attribute__ ((packed));
-
-struct ceph_osd_reply_head {
-	__le32 client_inc;                /* client incarnation */
-	__le32 flags;
-	struct ceph_object_layout layout;
-	__le32 osdmap_epoch;
-	struct ceph_eversion reassert_version; /* for replaying uncommitted */
-
-	__le32 result;                    /* result code */
-
-	__le32 object_len;                /* length of object name */
-	__le32 num_ops;
-	struct ceph_osd_op ops[0];  /* ops[], object */
-} __attribute__ ((packed));
-
-
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/ceph/types.h b/ANDROID_3.4.5/include/linux/ceph/types.h
deleted file mode 100644
index 28b35a00..00000000
--- a/ANDROID_3.4.5/include/linux/ceph/types.h
+++ /dev/null
@@ -1,29 +0,0 @@
-#ifndef _FS_CEPH_TYPES_H
-#define _FS_CEPH_TYPES_H
-
-/* needed before including ceph_fs.h */
-#include <linux/in.h>
-#include <linux/types.h>
-#include <linux/fcntl.h>
-#include <linux/string.h>
-
-#include "ceph_fs.h"
-#include "ceph_frag.h"
-#include "ceph_hash.h"
-
-/*
- * Identify inodes by both their ino AND snapshot id (a u64).
- */
-struct ceph_vino {
-	u64 ino;
-	u64 snap;
-};
-
-
-/* context for the caps reservation mechanism */
-struct ceph_cap_reservation {
-	int count;
-};
-
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/cfag12864b.h b/ANDROID_3.4.5/include/linux/cfag12864b.h
deleted file mode 100644
index b454dfce..00000000
--- a/ANDROID_3.4.5/include/linux/cfag12864b.h
+++ /dev/null
@@ -1,82 +0,0 @@
-/*
- *    Filename: cfag12864b.h
- *     Version: 0.1.0
- * Description: cfag12864b LCD driver header
- *     License: GPLv2
- *
- *      Author: Copyright (C) Miguel Ojeda Sandonis
- *        Date: 2006-10-12
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- */
-
-#ifndef _CFAG12864B_H_
-#define _CFAG12864B_H_
-
-#define CFAG12864B_WIDTH	(128)
-#define CFAG12864B_HEIGHT	(64)
-#define CFAG12864B_CONTROLLERS	(2)
-#define CFAG12864B_PAGES	(8)
-#define CFAG12864B_ADDRESSES	(64)
-#define CFAG12864B_SIZE		((CFAG12864B_CONTROLLERS) * \
-				(CFAG12864B_PAGES) * \
-				(CFAG12864B_ADDRESSES))
-
-/*
- * The driver will blit this buffer to the LCD
- *
- * Its size is CFAG12864B_SIZE.
- */
-extern unsigned char * cfag12864b_buffer;
-
-/*
- * Get the refresh rate of the LCD
- *
- * Returns the refresh rate (hertz).
- */
-extern unsigned int cfag12864b_getrate(void);
-
-/*
- * Enable refreshing
- *
- * Returns 0 if successful (anyone was using it),
- * or != 0 if failed (someone is using it).
- */
-extern unsigned char cfag12864b_enable(void);
-
-/*
- * Disable refreshing
- *
- * You should call this only when you finish using the LCD.
- */
-extern void cfag12864b_disable(void);
-
-/*
- * Is enabled refreshing? (is anyone using the module?)
- *
- * Returns 0 if refreshing is not enabled (anyone is using it),
- * or != 0 if refreshing is enabled (someone is using it).
- *
- * Useful for buffer read-only modules.
- */
-extern unsigned char cfag12864b_isenabled(void);
-
-/*
- * Is the module inited?
- */
-extern unsigned char cfag12864b_isinited(void);
-
-#endif /* _CFAG12864B_H_ */
-
diff --git a/ANDROID_3.4.5/include/linux/cgroup.h b/ANDROID_3.4.5/include/linux/cgroup.h
deleted file mode 100644
index b2a37357..00000000
--- a/ANDROID_3.4.5/include/linux/cgroup.h
+++ /dev/null
@@ -1,627 +0,0 @@
-#ifndef _LINUX_CGROUP_H
-#define _LINUX_CGROUP_H
-/*
- *  cgroup interface
- *
- *  Copyright (C) 2003 BULL SA
- *  Copyright (C) 2004-2006 Silicon Graphics, Inc.
- *
- */
-
-#include <linux/sched.h>
-#include <linux/cpumask.h>
-#include <linux/nodemask.h>
-#include <linux/rcupdate.h>
-#include <linux/cgroupstats.h>
-#include <linux/prio_heap.h>
-#include <linux/rwsem.h>
-#include <linux/idr.h>
-
-#ifdef CONFIG_CGROUPS
-
-struct cgroupfs_root;
-struct cgroup_subsys;
-struct inode;
-struct cgroup;
-struct css_id;
-
-extern int cgroup_init_early(void);
-extern int cgroup_init(void);
-extern void cgroup_lock(void);
-extern int cgroup_lock_is_held(void);
-extern bool cgroup_lock_live_group(struct cgroup *cgrp);
-extern void cgroup_unlock(void);
-extern void cgroup_fork(struct task_struct *p);
-extern void cgroup_fork_callbacks(struct task_struct *p);
-extern void cgroup_post_fork(struct task_struct *p);
-extern void cgroup_exit(struct task_struct *p, int run_callbacks);
-extern int cgroupstats_build(struct cgroupstats *stats,
-				struct dentry *dentry);
-extern int cgroup_load_subsys(struct cgroup_subsys *ss);
-extern void cgroup_unload_subsys(struct cgroup_subsys *ss);
-
-extern const struct file_operations proc_cgroup_operations;
-
-/* Define the enumeration of all builtin cgroup subsystems */
-#define SUBSYS(_x) _x ## _subsys_id,
-enum cgroup_subsys_id {
-#include <linux/cgroup_subsys.h>
-	CGROUP_BUILTIN_SUBSYS_COUNT
-};
-#undef SUBSYS
-/*
- * This define indicates the maximum number of subsystems that can be loaded
- * at once. We limit to this many since cgroupfs_root has subsys_bits to keep
- * track of all of them.
- */
-#define CGROUP_SUBSYS_COUNT (BITS_PER_BYTE*sizeof(unsigned long))
-
-/* Per-subsystem/per-cgroup state maintained by the system. */
-struct cgroup_subsys_state {
-	/*
-	 * The cgroup that this subsystem is attached to. Useful
-	 * for subsystems that want to know about the cgroup
-	 * hierarchy structure
-	 */
-	struct cgroup *cgroup;
-
-	/*
-	 * State maintained by the cgroup system to allow subsystems
-	 * to be "busy". Should be accessed via css_get(),
-	 * css_tryget() and and css_put().
-	 */
-
-	atomic_t refcnt;
-
-	unsigned long flags;
-	/* ID for this css, if possible */
-	struct css_id __rcu *id;
-};
-
-/* bits in struct cgroup_subsys_state flags field */
-enum {
-	CSS_ROOT, /* This CSS is the root of the subsystem */
-	CSS_REMOVED, /* This CSS is dead */
-};
-
-/*
- * Call css_get() to hold a reference on the css; it can be used
- * for a reference obtained via:
- * - an existing ref-counted reference to the css
- * - task->cgroups for a locked task
- */
-
-extern void __css_get(struct cgroup_subsys_state *css, int count);
-static inline void css_get(struct cgroup_subsys_state *css)
-{
-	/* We don't need to reference count the root state */
-	if (!test_bit(CSS_ROOT, &css->flags))
-		__css_get(css, 1);
-}
-
-static inline bool css_is_removed(struct cgroup_subsys_state *css)
-{
-	return test_bit(CSS_REMOVED, &css->flags);
-}
-
-/*
- * Call css_tryget() to take a reference on a css if your existing
- * (known-valid) reference isn't already ref-counted. Returns false if
- * the css has been destroyed.
- */
-
-static inline bool css_tryget(struct cgroup_subsys_state *css)
-{
-	if (test_bit(CSS_ROOT, &css->flags))
-		return true;
-	while (!atomic_inc_not_zero(&css->refcnt)) {
-		if (test_bit(CSS_REMOVED, &css->flags))
-			return false;
-		cpu_relax();
-	}
-	return true;
-}
-
-/*
- * css_put() should be called to release a reference taken by
- * css_get() or css_tryget()
- */
-
-extern void __css_put(struct cgroup_subsys_state *css, int count);
-static inline void css_put(struct cgroup_subsys_state *css)
-{
-	if (!test_bit(CSS_ROOT, &css->flags))
-		__css_put(css, 1);
-}
-
-/* bits in struct cgroup flags field */
-enum {
-	/* Control Group is dead */
-	CGRP_REMOVED,
-	/* Control Group has ever had a child cgroup or a task */
-	CGRP_RELEASABLE,
-	/* Control Group requires release notifications to userspace */
-	CGRP_NOTIFY_ON_RELEASE,
-	/*
-	 * A thread in rmdir() is wating for this cgroup.
-	 */
-	CGRP_WAIT_ON_RMDIR,
-	/*
-	 * Clone cgroup values when creating a new child cgroup
-	 */
-	CGRP_CLONE_CHILDREN,
-};
-
-struct cgroup {
-	unsigned long flags;		/* "unsigned long" so bitops work */
-
-	/*
-	 * count users of this cgroup. >0 means busy, but doesn't
-	 * necessarily indicate the number of tasks in the cgroup
-	 */
-	atomic_t count;
-
-	/*
-	 * We link our 'sibling' struct into our parent's 'children'.
-	 * Our children link their 'sibling' into our 'children'.
-	 */
-	struct list_head sibling;	/* my parent's children */
-	struct list_head children;	/* my children */
-
-	struct cgroup *parent;		/* my parent */
-	struct dentry __rcu *dentry;	/* cgroup fs entry, RCU protected */
-
-	/* Private pointers for each registered subsystem */
-	struct cgroup_subsys_state *subsys[CGROUP_SUBSYS_COUNT];
-
-	struct cgroupfs_root *root;
-	struct cgroup *top_cgroup;
-
-	/*
-	 * List of cg_cgroup_links pointing at css_sets with
-	 * tasks in this cgroup. Protected by css_set_lock
-	 */
-	struct list_head css_sets;
-
-	/*
-	 * Linked list running through all cgroups that can
-	 * potentially be reaped by the release agent. Protected by
-	 * release_list_lock
-	 */
-	struct list_head release_list;
-
-	/*
-	 * list of pidlists, up to two for each namespace (one for procs, one
-	 * for tasks); created on demand.
-	 */
-	struct list_head pidlists;
-	struct mutex pidlist_mutex;
-
-	/* For RCU-protected deletion */
-	struct rcu_head rcu_head;
-
-	/* List of events which userspace want to receive */
-	struct list_head event_list;
-	spinlock_t event_list_lock;
-};
-
-/*
- * A css_set is a structure holding pointers to a set of
- * cgroup_subsys_state objects. This saves space in the task struct
- * object and speeds up fork()/exit(), since a single inc/dec and a
- * list_add()/del() can bump the reference count on the entire cgroup
- * set for a task.
- */
-
-struct css_set {
-
-	/* Reference count */
-	atomic_t refcount;
-
-	/*
-	 * List running through all cgroup groups in the same hash
-	 * slot. Protected by css_set_lock
-	 */
-	struct hlist_node hlist;
-
-	/*
-	 * List running through all tasks using this cgroup
-	 * group. Protected by css_set_lock
-	 */
-	struct list_head tasks;
-
-	/*
-	 * List of cg_cgroup_link objects on link chains from
-	 * cgroups referenced from this css_set. Protected by
-	 * css_set_lock
-	 */
-	struct list_head cg_links;
-
-	/*
-	 * Set of subsystem states, one for each subsystem. This array
-	 * is immutable after creation apart from the init_css_set
-	 * during subsystem registration (at boot time) and modular subsystem
-	 * loading/unloading.
-	 */
-	struct cgroup_subsys_state *subsys[CGROUP_SUBSYS_COUNT];
-
-	/* For RCU-protected deletion */
-	struct rcu_head rcu_head;
-	struct work_struct work;
-};
-
-/*
- * cgroup_map_cb is an abstract callback API for reporting map-valued
- * control files
- */
-
-struct cgroup_map_cb {
-	int (*fill)(struct cgroup_map_cb *cb, const char *key, u64 value);
-	void *state;
-};
-
-/*
- * struct cftype: handler definitions for cgroup control files
- *
- * When reading/writing to a file:
- *	- the cgroup to use is file->f_dentry->d_parent->d_fsdata
- *	- the 'cftype' of the file is file->f_dentry->d_fsdata
- */
-
-#define MAX_CFTYPE_NAME 64
-struct cftype {
-	/*
-	 * By convention, the name should begin with the name of the
-	 * subsystem, followed by a period
-	 */
-	char name[MAX_CFTYPE_NAME];
-	int private;
-	/*
-	 * If not 0, file mode is set to this value, otherwise it will
-	 * be figured out automatically
-	 */
-	umode_t mode;
-
-	/*
-	 * If non-zero, defines the maximum length of string that can
-	 * be passed to write_string; defaults to 64
-	 */
-	size_t max_write_len;
-
-	int (*open)(struct inode *inode, struct file *file);
-	ssize_t (*read)(struct cgroup *cgrp, struct cftype *cft,
-			struct file *file,
-			char __user *buf, size_t nbytes, loff_t *ppos);
-	/*
-	 * read_u64() is a shortcut for the common case of returning a
-	 * single integer. Use it in place of read()
-	 */
-	u64 (*read_u64)(struct cgroup *cgrp, struct cftype *cft);
-	/*
-	 * read_s64() is a signed version of read_u64()
-	 */
-	s64 (*read_s64)(struct cgroup *cgrp, struct cftype *cft);
-	/*
-	 * read_map() is used for defining a map of key/value
-	 * pairs. It should call cb->fill(cb, key, value) for each
-	 * entry. The key/value pairs (and their ordering) should not
-	 * change between reboots.
-	 */
-	int (*read_map)(struct cgroup *cont, struct cftype *cft,
-			struct cgroup_map_cb *cb);
-	/*
-	 * read_seq_string() is used for outputting a simple sequence
-	 * using seqfile.
-	 */
-	int (*read_seq_string)(struct cgroup *cont, struct cftype *cft,
-			       struct seq_file *m);
-
-	ssize_t (*write)(struct cgroup *cgrp, struct cftype *cft,
-			 struct file *file,
-			 const char __user *buf, size_t nbytes, loff_t *ppos);
-
-	/*
-	 * write_u64() is a shortcut for the common case of accepting
-	 * a single integer (as parsed by simple_strtoull) from
-	 * userspace. Use in place of write(); return 0 or error.
-	 */
-	int (*write_u64)(struct cgroup *cgrp, struct cftype *cft, u64 val);
-	/*
-	 * write_s64() is a signed version of write_u64()
-	 */
-	int (*write_s64)(struct cgroup *cgrp, struct cftype *cft, s64 val);
-
-	/*
-	 * write_string() is passed a nul-terminated kernelspace
-	 * buffer of maximum length determined by max_write_len.
-	 * Returns 0 or -ve error code.
-	 */
-	int (*write_string)(struct cgroup *cgrp, struct cftype *cft,
-			    const char *buffer);
-	/*
-	 * trigger() callback can be used to get some kick from the
-	 * userspace, when the actual string written is not important
-	 * at all. The private field can be used to determine the
-	 * kick type for multiplexing.
-	 */
-	int (*trigger)(struct cgroup *cgrp, unsigned int event);
-
-	int (*release)(struct inode *inode, struct file *file);
-
-	/*
-	 * register_event() callback will be used to add new userspace
-	 * waiter for changes related to the cftype. Implement it if
-	 * you want to provide this functionality. Use eventfd_signal()
-	 * on eventfd to send notification to userspace.
-	 */
-	int (*register_event)(struct cgroup *cgrp, struct cftype *cft,
-			struct eventfd_ctx *eventfd, const char *args);
-	/*
-	 * unregister_event() callback will be called when userspace
-	 * closes the eventfd or on cgroup removing.
-	 * This callback must be implemented, if you want provide
-	 * notification functionality.
-	 */
-	void (*unregister_event)(struct cgroup *cgrp, struct cftype *cft,
-			struct eventfd_ctx *eventfd);
-};
-
-struct cgroup_scanner {
-	struct cgroup *cg;
-	int (*test_task)(struct task_struct *p, struct cgroup_scanner *scan);
-	void (*process_task)(struct task_struct *p,
-			struct cgroup_scanner *scan);
-	struct ptr_heap *heap;
-	void *data;
-};
-
-/*
- * Add a new file to the given cgroup directory. Should only be
- * called by subsystems from within a populate() method
- */
-int cgroup_add_file(struct cgroup *cgrp, struct cgroup_subsys *subsys,
-		       const struct cftype *cft);
-
-/*
- * Add a set of new files to the given cgroup directory. Should
- * only be called by subsystems from within a populate() method
- */
-int cgroup_add_files(struct cgroup *cgrp,
-			struct cgroup_subsys *subsys,
-			const struct cftype cft[],
-			int count);
-
-int cgroup_is_removed(const struct cgroup *cgrp);
-
-int cgroup_path(const struct cgroup *cgrp, char *buf, int buflen);
-
-int cgroup_task_count(const struct cgroup *cgrp);
-
-/* Return true if cgrp is a descendant of the task's cgroup */
-int cgroup_is_descendant(const struct cgroup *cgrp, struct task_struct *task);
-
-/*
- * When the subsys has to access css and may add permanent refcnt to css,
- * it should take care of racy conditions with rmdir(). Following set of
- * functions, is for stop/restart rmdir if necessary.
- * Because these will call css_get/put, "css" should be alive css.
- *
- *  cgroup_exclude_rmdir();
- *  ...do some jobs which may access arbitrary empty cgroup
- *  cgroup_release_and_wakeup_rmdir();
- *
- *  When someone removes a cgroup while cgroup_exclude_rmdir() holds it,
- *  it sleeps and cgroup_release_and_wakeup_rmdir() will wake him up.
- */
-
-void cgroup_exclude_rmdir(struct cgroup_subsys_state *css);
-void cgroup_release_and_wakeup_rmdir(struct cgroup_subsys_state *css);
-
-/*
- * Control Group taskset, used to pass around set of tasks to cgroup_subsys
- * methods.
- */
-struct cgroup_taskset;
-struct task_struct *cgroup_taskset_first(struct cgroup_taskset *tset);
-struct task_struct *cgroup_taskset_next(struct cgroup_taskset *tset);
-struct cgroup *cgroup_taskset_cur_cgroup(struct cgroup_taskset *tset);
-int cgroup_taskset_size(struct cgroup_taskset *tset);
-
-/**
- * cgroup_taskset_for_each - iterate cgroup_taskset
- * @task: the loop cursor
- * @skip_cgrp: skip if task's cgroup matches this, %NULL to iterate through all
- * @tset: taskset to iterate
- */
-#define cgroup_taskset_for_each(task, skip_cgrp, tset)			\
-	for ((task) = cgroup_taskset_first((tset)); (task);		\
-	     (task) = cgroup_taskset_next((tset)))			\
-		if (!(skip_cgrp) ||					\
-		    cgroup_taskset_cur_cgroup((tset)) != (skip_cgrp))
-
-/*
- * Control Group subsystem type.
- * See Documentation/cgroups/cgroups.txt for details
- */
-
-struct cgroup_subsys {
-	struct cgroup_subsys_state *(*create)(struct cgroup *cgrp);
-	int (*pre_destroy)(struct cgroup *cgrp);
-	void (*destroy)(struct cgroup *cgrp);
-	int (*allow_attach)(struct cgroup *cgrp, struct cgroup_taskset *tset);
-	int (*can_attach)(struct cgroup *cgrp, struct cgroup_taskset *tset);
-	void (*cancel_attach)(struct cgroup *cgrp, struct cgroup_taskset *tset);
-	void (*attach)(struct cgroup *cgrp, struct cgroup_taskset *tset);
-	void (*fork)(struct task_struct *task);
-	void (*exit)(struct cgroup *cgrp, struct cgroup *old_cgrp,
-		     struct task_struct *task);
-	int (*populate)(struct cgroup_subsys *ss, struct cgroup *cgrp);
-	void (*post_clone)(struct cgroup *cgrp);
-	void (*bind)(struct cgroup *root);
-
-	int subsys_id;
-	int active;
-	int disabled;
-	int early_init;
-	/*
-	 * True if this subsys uses ID. ID is not available before cgroup_init()
-	 * (not available in early_init time.)
-	 */
-	bool use_id;
-#define MAX_CGROUP_TYPE_NAMELEN 32
-	const char *name;
-
-	/*
-	 * Protects sibling/children links of cgroups in this
-	 * hierarchy, plus protects which hierarchy (or none) the
-	 * subsystem is a part of (i.e. root/sibling).  To avoid
-	 * potential deadlocks, the following operations should not be
-	 * undertaken while holding any hierarchy_mutex:
-	 *
-	 * - allocating memory
-	 * - initiating hotplug events
-	 */
-	struct mutex hierarchy_mutex;
-	struct lock_class_key subsys_key;
-
-	/*
-	 * Link to parent, and list entry in parent's children.
-	 * Protected by this->hierarchy_mutex and cgroup_lock()
-	 */
-	struct cgroupfs_root *root;
-	struct list_head sibling;
-	/* used when use_id == true */
-	struct idr idr;
-	spinlock_t id_lock;
-
-	/* should be defined only by modular subsystems */
-	struct module *module;
-};
-
-#define SUBSYS(_x) extern struct cgroup_subsys _x ## _subsys;
-#include <linux/cgroup_subsys.h>
-#undef SUBSYS
-
-static inline struct cgroup_subsys_state *cgroup_subsys_state(
-	struct cgroup *cgrp, int subsys_id)
-{
-	return cgrp->subsys[subsys_id];
-}
-
-/*
- * function to get the cgroup_subsys_state which allows for extra
- * rcu_dereference_check() conditions, such as locks used during the
- * cgroup_subsys::attach() methods.
- */
-#define task_subsys_state_check(task, subsys_id, __c)			\
-	rcu_dereference_check(task->cgroups->subsys[subsys_id],		\
-			      lockdep_is_held(&task->alloc_lock) ||	\
-			      cgroup_lock_is_held() || (__c))
-
-static inline struct cgroup_subsys_state *
-task_subsys_state(struct task_struct *task, int subsys_id)
-{
-	return task_subsys_state_check(task, subsys_id, false);
-}
-
-static inline struct cgroup* task_cgroup(struct task_struct *task,
-					       int subsys_id)
-{
-	return task_subsys_state(task, subsys_id)->cgroup;
-}
-
-/* A cgroup_iter should be treated as an opaque object */
-struct cgroup_iter {
-	struct list_head *cg_link;
-	struct list_head *task;
-};
-
-/*
- * To iterate across the tasks in a cgroup:
- *
- * 1) call cgroup_iter_start to initialize an iterator
- *
- * 2) call cgroup_iter_next() to retrieve member tasks until it
- *    returns NULL or until you want to end the iteration
- *
- * 3) call cgroup_iter_end() to destroy the iterator.
- *
- * Or, call cgroup_scan_tasks() to iterate through every task in a
- * cgroup - cgroup_scan_tasks() holds the css_set_lock when calling
- * the test_task() callback, but not while calling the process_task()
- * callback.
- */
-void cgroup_iter_start(struct cgroup *cgrp, struct cgroup_iter *it);
-struct task_struct *cgroup_iter_next(struct cgroup *cgrp,
-					struct cgroup_iter *it);
-void cgroup_iter_end(struct cgroup *cgrp, struct cgroup_iter *it);
-int cgroup_scan_tasks(struct cgroup_scanner *scan);
-int cgroup_attach_task(struct cgroup *, struct task_struct *);
-int cgroup_attach_task_all(struct task_struct *from, struct task_struct *);
-
-/*
- * CSS ID is ID for cgroup_subsys_state structs under subsys. This only works
- * if cgroup_subsys.use_id == true. It can be used for looking up and scanning.
- * CSS ID is assigned at cgroup allocation (create) automatically
- * and removed when subsys calls free_css_id() function. This is because
- * the lifetime of cgroup_subsys_state is subsys's matter.
- *
- * Looking up and scanning function should be called under rcu_read_lock().
- * Taking cgroup_mutex()/hierarchy_mutex() is not necessary for following calls.
- * But the css returned by this routine can be "not populated yet" or "being
- * destroyed". The caller should check css and cgroup's status.
- */
-
-/*
- * Typically Called at ->destroy(), or somewhere the subsys frees
- * cgroup_subsys_state.
- */
-void free_css_id(struct cgroup_subsys *ss, struct cgroup_subsys_state *css);
-
-/* Find a cgroup_subsys_state which has given ID */
-
-struct cgroup_subsys_state *css_lookup(struct cgroup_subsys *ss, int id);
-
-/*
- * Get a cgroup whose id is greater than or equal to id under tree of root.
- * Returning a cgroup_subsys_state or NULL.
- */
-struct cgroup_subsys_state *css_get_next(struct cgroup_subsys *ss, int id,
-		struct cgroup_subsys_state *root, int *foundid);
-
-/* Returns true if root is ancestor of cg */
-bool css_is_ancestor(struct cgroup_subsys_state *cg,
-		     const struct cgroup_subsys_state *root);
-
-/* Get id and depth of css */
-unsigned short css_id(struct cgroup_subsys_state *css);
-unsigned short css_depth(struct cgroup_subsys_state *css);
-struct cgroup_subsys_state *cgroup_css_from_dir(struct file *f, int id);
-
-#else /* !CONFIG_CGROUPS */
-
-static inline int cgroup_init_early(void) { return 0; }
-static inline int cgroup_init(void) { return 0; }
-static inline void cgroup_fork(struct task_struct *p) {}
-static inline void cgroup_fork_callbacks(struct task_struct *p) {}
-static inline void cgroup_post_fork(struct task_struct *p) {}
-static inline void cgroup_exit(struct task_struct *p, int callbacks) {}
-
-static inline void cgroup_lock(void) {}
-static inline void cgroup_unlock(void) {}
-static inline int cgroupstats_build(struct cgroupstats *stats,
-					struct dentry *dentry)
-{
-	return -EINVAL;
-}
-
-/* No cgroups - nothing to do */
-static inline int cgroup_attach_task_all(struct task_struct *from,
-					 struct task_struct *t)
-{
-	return 0;
-}
-
-#endif /* !CONFIG_CGROUPS */
-
-#endif /* _LINUX_CGROUP_H */
diff --git a/ANDROID_3.4.5/include/linux/cgroup_subsys.h b/ANDROID_3.4.5/include/linux/cgroup_subsys.h
deleted file mode 100644
index 0bd390ce..00000000
--- a/ANDROID_3.4.5/include/linux/cgroup_subsys.h
+++ /dev/null
@@ -1,74 +0,0 @@
-/* Add subsystem definitions of the form SUBSYS(<name>) in this
- * file. Surround each one by a line of comment markers so that
- * patches don't collide
- */
-
-/* */
-
-/* */
-
-#ifdef CONFIG_CPUSETS
-SUBSYS(cpuset)
-#endif
-
-/* */
-
-#ifdef CONFIG_CGROUP_DEBUG
-SUBSYS(debug)
-#endif
-
-/* */
-
-#ifdef CONFIG_CGROUP_SCHED
-SUBSYS(cpu_cgroup)
-#endif
-
-/* */
-
-#ifdef CONFIG_CGROUP_CPUACCT
-SUBSYS(cpuacct)
-#endif
-
-/* */
-
-#ifdef CONFIG_CGROUP_MEM_RES_CTLR
-SUBSYS(mem_cgroup)
-#endif
-
-/* */
-
-#ifdef CONFIG_CGROUP_DEVICE
-SUBSYS(devices)
-#endif
-
-/* */
-
-#ifdef CONFIG_CGROUP_FREEZER
-SUBSYS(freezer)
-#endif
-
-/* */
-
-#ifdef CONFIG_NET_CLS_CGROUP
-SUBSYS(net_cls)
-#endif
-
-/* */
-
-#ifdef CONFIG_BLK_CGROUP
-SUBSYS(blkio)
-#endif
-
-/* */
-
-#ifdef CONFIG_CGROUP_PERF
-SUBSYS(perf)
-#endif
-
-/* */
-
-#ifdef CONFIG_NETPRIO_CGROUP
-SUBSYS(net_prio)
-#endif
-
-/* */
diff --git a/ANDROID_3.4.5/include/linux/cgroupstats.h b/ANDROID_3.4.5/include/linux/cgroupstats.h
deleted file mode 100644
index 3753c331..00000000
--- a/ANDROID_3.4.5/include/linux/cgroupstats.h
+++ /dev/null
@@ -1,71 +0,0 @@
-/* cgroupstats.h - exporting per-cgroup statistics
- *
- * Copyright IBM Corporation, 2007
- * Author Balbir Singh <balbir@linux.vnet.ibm.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of version 2.1 of the GNU Lesser General Public License
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it would be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-#ifndef _LINUX_CGROUPSTATS_H
-#define _LINUX_CGROUPSTATS_H
-
-#include <linux/types.h>
-#include <linux/taskstats.h>
-
-/*
- * Data shared between user space and kernel space on a per cgroup
- * basis. This data is shared using taskstats.
- *
- * Most of these states are derived by looking at the task->state value
- * For the nr_io_wait state, a flag in the delay accounting structure
- * indicates that the task is waiting on IO
- *
- * Each member is aligned to a 8 byte boundary.
- */
-struct cgroupstats {
-	__u64	nr_sleeping;		/* Number of tasks sleeping */
-	__u64	nr_running;		/* Number of tasks running */
-	__u64	nr_stopped;		/* Number of tasks in stopped state */
-	__u64	nr_uninterruptible;	/* Number of tasks in uninterruptible */
-					/* state */
-	__u64	nr_io_wait;		/* Number of tasks waiting on IO */
-};
-
-/*
- * Commands sent from userspace
- * Not versioned. New commands should only be inserted at the enum's end
- * prior to __CGROUPSTATS_CMD_MAX
- */
-
-enum {
-	CGROUPSTATS_CMD_UNSPEC = __TASKSTATS_CMD_MAX,	/* Reserved */
-	CGROUPSTATS_CMD_GET,		/* user->kernel request/get-response */
-	CGROUPSTATS_CMD_NEW,		/* kernel->user event */
-	__CGROUPSTATS_CMD_MAX,
-};
-
-#define CGROUPSTATS_CMD_MAX (__CGROUPSTATS_CMD_MAX - 1)
-
-enum {
-	CGROUPSTATS_TYPE_UNSPEC = 0,	/* Reserved */
-	CGROUPSTATS_TYPE_CGROUP_STATS,	/* contains name + stats */
-	__CGROUPSTATS_TYPE_MAX,
-};
-
-#define CGROUPSTATS_TYPE_MAX (__CGROUPSTATS_TYPE_MAX - 1)
-
-enum {
-	CGROUPSTATS_CMD_ATTR_UNSPEC = 0,
-	CGROUPSTATS_CMD_ATTR_FD,
-	__CGROUPSTATS_CMD_ATTR_MAX,
-};
-
-#define CGROUPSTATS_CMD_ATTR_MAX (__CGROUPSTATS_CMD_ATTR_MAX - 1)
-
-#endif /* _LINUX_CGROUPSTATS_H */
diff --git a/ANDROID_3.4.5/include/linux/chio.h b/ANDROID_3.4.5/include/linux/chio.h
deleted file mode 100644
index d9bac7f9..00000000
--- a/ANDROID_3.4.5/include/linux/chio.h
+++ /dev/null
@@ -1,168 +0,0 @@
-/*
- * ioctl interface for the scsi media changer driver
- */
-
-/* changer element types */
-#define CHET_MT   0	/* media transport element (robot) */
-#define CHET_ST   1	/* storage element (media slots) */
-#define CHET_IE   2	/* import/export element */
-#define CHET_DT   3	/* data transfer element (tape/cdrom/whatever) */
-#define CHET_V1   4	/* vendor specific #1 */
-#define CHET_V2   5	/* vendor specific #2 */
-#define CHET_V3   6	/* vendor specific #3 */
-#define CHET_V4   7	/* vendor specific #4 */
-
-
-/*
- * CHIOGPARAMS
- *    query changer properties
- *
- * CHIOVGPARAMS
- *    query vendor-specific element types
- *
- *    accessing elements works by specifing type and unit of the element.
- *    for example, storage elements are addressed with type = CHET_ST and
- *    unit = 0 .. cp_nslots-1
- *
- */
-struct changer_params {
-	int cp_curpicker;  /* current transport element */
-	int cp_npickers;   /* number of transport elements      (CHET_MT) */
-	int cp_nslots;     /* number of storage elements        (CHET_ST) */
-	int cp_nportals;   /* number of import/export elements  (CHET_IE) */
-	int cp_ndrives;    /* number of data transfer elements  (CHET_DT) */
-};
-struct changer_vendor_params {
-	int  cvp_n1;       /* number of vendor specific elems   (CHET_V1) */
-	char cvp_label1[16];
-	int  cvp_n2;       /* number of vendor specific elems   (CHET_V2) */
-	char cvp_label2[16];
-	int  cvp_n3;       /* number of vendor specific elems   (CHET_V3) */
-	char cvp_label3[16];
-	int  cvp_n4;       /* number of vendor specific elems   (CHET_V4) */
-	char cvp_label4[16];
-	int  reserved[8];
-};
-
-
-/*
- * CHIOMOVE
- *    move a medium from one element to another
- */
-struct changer_move {
-	int cm_fromtype;	/* type/unit of source element */
-	int cm_fromunit;	
-	int cm_totype;	/* type/unit of destination element */
-	int cm_tounit;
-	int cm_flags;
-};
-#define CM_INVERT   1   /* flag: rotate media (for double-sided like MOD) */
-
-
-/*
- * CHIOEXCHANGE
- *    move one medium from element #1 to element #2,
- *    and another one from element #2 to element #3.
- *    element #1 and #3 are allowed to be identical.
- */
-struct changer_exchange {
-	int ce_srctype;	    /* type/unit of element #1 */
-	int ce_srcunit;
-	int ce_fdsttype;    /* type/unit of element #2 */
-	int ce_fdstunit;
-	int ce_sdsttype;    /* type/unit of element #3 */
-	int ce_sdstunit;
-	int ce_flags;
-};
-#define CE_INVERT1   1
-#define CE_INVERT2   2
-
-
-/*
- * CHIOPOSITION
- *    move the transport element (robot arm) to a specific element.
- */
-struct changer_position {
-	int cp_type;
-	int cp_unit;
-	int cp_flags;
-};
-#define CP_INVERT   1
-
-
-/*
- * CHIOGSTATUS
- *    get element status for all elements of a specific type
- */
-struct changer_element_status {
-	int             ces_type;
-	unsigned char   __user *ces_data;
-};
-#define CESTATUS_FULL     0x01 /* full */
-#define CESTATUS_IMPEXP   0x02	/* media was imported (inserted by sysop) */
-#define CESTATUS_EXCEPT   0x04	/* error condition */
-#define CESTATUS_ACCESS   0x08	/* access allowed */
-#define CESTATUS_EXENAB   0x10	/* element can export media */
-#define CESTATUS_INENAB   0x20	/* element can import media */
-
-
-/*
- * CHIOGELEM
- *    get more detailed status information for a single element
- */
-struct changer_get_element {
-	int	cge_type;	 /* type/unit */
-	int	cge_unit;
-	int	cge_status;      /* status */
-	int     cge_errno;       /* errno */
-	int     cge_srctype;     /* source element of the last move/exchange */
-	int     cge_srcunit;
-	int     cge_id;          /* scsi id  (for data transfer elements) */
-	int     cge_lun;         /* scsi lun (for data transfer elements) */
-	char    cge_pvoltag[36]; /* primary volume tag */
-	char    cge_avoltag[36]; /* alternate volume tag */
-	int     cge_flags;
-};
-/* flags */
-#define CGE_ERRNO     0x01       /* errno available       */
-#define CGE_INVERT    0x02       /* media inverted        */
-#define CGE_SRC       0x04       /* media src available   */
-#define CGE_IDLUN     0x08       /* ID+LUN available      */
-#define CGE_PVOLTAG   0x10       /* primary volume tag available */
-#define CGE_AVOLTAG   0x20       /* alternate volume tag available */
-
-
-/*
- * CHIOSVOLTAG
- *    set volume tag
- */
-struct changer_set_voltag {
-	int	csv_type;	 /* type/unit */
-	int	csv_unit;
-	char    csv_voltag[36];  /* volume tag */
-	int     csv_flags;
-};
-#define CSV_PVOLTAG   0x01       /* primary volume tag */
-#define CSV_AVOLTAG   0x02       /* alternate volume tag */
-#define CSV_CLEARTAG  0x04       /* clear volume tag */
-
-/* ioctls */
-#define CHIOMOVE       _IOW('c', 1,struct changer_move)
-#define CHIOEXCHANGE   _IOW('c', 2,struct changer_exchange)
-#define CHIOPOSITION   _IOW('c', 3,struct changer_position)
-#define CHIOGPICKER    _IOR('c', 4,int)                        /* not impl. */
-#define CHIOSPICKER    _IOW('c', 5,int)                        /* not impl. */
-#define CHIOGPARAMS    _IOR('c', 6,struct changer_params)
-#define CHIOGSTATUS    _IOW('c', 8,struct changer_element_status)
-#define CHIOGELEM      _IOW('c',16,struct changer_get_element)
-#define CHIOINITELEM   _IO('c',17)
-#define CHIOSVOLTAG    _IOW('c',18,struct changer_set_voltag)
-#define CHIOGVPARAMS   _IOR('c',19,struct changer_vendor_params)
-
-/* ---------------------------------------------------------------------- */
-
-/*
- * Local variables:
- * c-basic-offset: 8
- * End:
- */
diff --git a/ANDROID_3.4.5/include/linux/circ_buf.h b/ANDROID_3.4.5/include/linux/circ_buf.h
deleted file mode 100644
index 90f2471d..00000000
--- a/ANDROID_3.4.5/include/linux/circ_buf.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * See Documentation/circular-buffers.txt for more information.
- */
-
-#ifndef _LINUX_CIRC_BUF_H
-#define _LINUX_CIRC_BUF_H 1
-
-struct circ_buf {
-	char *buf;
-	int head;
-	int tail;
-};
-
-/* Return count in buffer.  */
-#define CIRC_CNT(head,tail,size) (((head) - (tail)) & ((size)-1))
-
-/* Return space available, 0..size-1.  We always leave one free char
-   as a completely full buffer has head == tail, which is the same as
-   empty.  */
-#define CIRC_SPACE(head,tail,size) CIRC_CNT((tail),((head)+1),(size))
-
-/* Return count up to the end of the buffer.  Carefully avoid
-   accessing head and tail more than once, so they can change
-   underneath us without returning inconsistent results.  */
-#define CIRC_CNT_TO_END(head,tail,size) \
-	({int end = (size) - (tail); \
-	  int n = ((head) + end) & ((size)-1); \
-	  n < end ? n : end;})
-
-/* Return space available up to the end of the buffer.  */
-#define CIRC_SPACE_TO_END(head,tail,size) \
-	({int end = (size) - 1 - (head); \
-	  int n = (end + (tail)) & ((size)-1); \
-	  n <= end ? n : end+1;})
-
-#endif /* _LINUX_CIRC_BUF_H  */
diff --git a/ANDROID_3.4.5/include/linux/cleancache.h b/ANDROID_3.4.5/include/linux/cleancache.h
deleted file mode 100644
index 42e55dee..00000000
--- a/ANDROID_3.4.5/include/linux/cleancache.h
+++ /dev/null
@@ -1,122 +0,0 @@
-#ifndef _LINUX_CLEANCACHE_H
-#define _LINUX_CLEANCACHE_H
-
-#include <linux/fs.h>
-#include <linux/exportfs.h>
-#include <linux/mm.h>
-
-#define CLEANCACHE_KEY_MAX 6
-
-/*
- * cleancache requires every file with a page in cleancache to have a
- * unique key unless/until the file is removed/truncated.  For some
- * filesystems, the inode number is unique, but for "modern" filesystems
- * an exportable filehandle is required (see exportfs.h)
- */
-struct cleancache_filekey {
-	union {
-		ino_t ino;
-		__u32 fh[CLEANCACHE_KEY_MAX];
-		u32 key[CLEANCACHE_KEY_MAX];
-	} u;
-};
-
-struct cleancache_ops {
-	int (*init_fs)(size_t);
-	int (*init_shared_fs)(char *uuid, size_t);
-	int (*get_page)(int, struct cleancache_filekey,
-			pgoff_t, struct page *);
-	void (*put_page)(int, struct cleancache_filekey,
-			pgoff_t, struct page *);
-	void (*invalidate_page)(int, struct cleancache_filekey, pgoff_t);
-	void (*invalidate_inode)(int, struct cleancache_filekey);
-	void (*invalidate_fs)(int);
-};
-
-extern struct cleancache_ops
-	cleancache_register_ops(struct cleancache_ops *ops);
-extern void __cleancache_init_fs(struct super_block *);
-extern void __cleancache_init_shared_fs(char *, struct super_block *);
-extern int  __cleancache_get_page(struct page *);
-extern void __cleancache_put_page(struct page *);
-extern void __cleancache_invalidate_page(struct address_space *, struct page *);
-extern void __cleancache_invalidate_inode(struct address_space *);
-extern void __cleancache_invalidate_fs(struct super_block *);
-extern int cleancache_enabled;
-
-#ifdef CONFIG_CLEANCACHE
-static inline bool cleancache_fs_enabled(struct page *page)
-{
-	return page->mapping->host->i_sb->cleancache_poolid >= 0;
-}
-static inline bool cleancache_fs_enabled_mapping(struct address_space *mapping)
-{
-	return mapping->host->i_sb->cleancache_poolid >= 0;
-}
-#else
-#define cleancache_enabled (0)
-#define cleancache_fs_enabled(_page) (0)
-#define cleancache_fs_enabled_mapping(_page) (0)
-#endif
-
-/*
- * The shim layer provided by these inline functions allows the compiler
- * to reduce all cleancache hooks to nothingness if CONFIG_CLEANCACHE
- * is disabled, to a single global variable check if CONFIG_CLEANCACHE
- * is enabled but no cleancache "backend" has dynamically enabled it,
- * and, for the most frequent cleancache ops, to a single global variable
- * check plus a superblock element comparison if CONFIG_CLEANCACHE is enabled
- * and a cleancache backend has dynamically enabled cleancache, but the
- * filesystem referenced by that cleancache op has not enabled cleancache.
- * As a result, CONFIG_CLEANCACHE can be enabled by default with essentially
- * no measurable performance impact.
- */
-
-static inline void cleancache_init_fs(struct super_block *sb)
-{
-	if (cleancache_enabled)
-		__cleancache_init_fs(sb);
-}
-
-static inline void cleancache_init_shared_fs(char *uuid, struct super_block *sb)
-{
-	if (cleancache_enabled)
-		__cleancache_init_shared_fs(uuid, sb);
-}
-
-static inline int cleancache_get_page(struct page *page)
-{
-	int ret = -1;
-
-	if (cleancache_enabled && cleancache_fs_enabled(page))
-		ret = __cleancache_get_page(page);
-	return ret;
-}
-
-static inline void cleancache_put_page(struct page *page)
-{
-	if (cleancache_enabled && cleancache_fs_enabled(page))
-		__cleancache_put_page(page);
-}
-
-static inline void cleancache_invalidate_page(struct address_space *mapping,
-					struct page *page)
-{
-	/* careful... page->mapping is NULL sometimes when this is called */
-	if (cleancache_enabled && cleancache_fs_enabled_mapping(mapping))
-		__cleancache_invalidate_page(mapping, page);
-}
-
-static inline void cleancache_invalidate_inode(struct address_space *mapping)
-{
-	if (cleancache_enabled && cleancache_fs_enabled_mapping(mapping))
-		__cleancache_invalidate_inode(mapping);
-}
-
-static inline void cleancache_invalidate_fs(struct super_block *sb)
-{
-	if (cleancache_enabled)
-		__cleancache_invalidate_fs(sb);
-}
-
-#endif /* _LINUX_CLEANCACHE_H */
diff --git a/ANDROID_3.4.5/include/linux/clk-private.h b/ANDROID_3.4.5/include/linux/clk-private.h
deleted file mode 100644
index 5e4312b6..00000000
--- a/ANDROID_3.4.5/include/linux/clk-private.h
+++ /dev/null
@@ -1,196 +0,0 @@
-/*
- *  linux/include/linux/clk-private.h
- *
- *  Copyright (c) 2010-2011 Jeremy Kerr <jeremy.kerr@canonical.com>
- *  Copyright (C) 2011-2012 Linaro Ltd <mturquette@linaro.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __LINUX_CLK_PRIVATE_H
-#define __LINUX_CLK_PRIVATE_H
-
-#include <linux/clk-provider.h>
-#include <linux/list.h>
-
-/*
- * WARNING: Do not include clk-private.h from any file that implements struct
- * clk_ops.  Doing so is a layering violation!
- *
- * This header exists only to allow for statically initialized clock data.  Any
- * static clock data must be defined in a separate file from the logic that
- * implements the clock operations for that same data.
- */
-
-#ifdef CONFIG_COMMON_CLK
-
-struct clk {
-	const char		*name;
-	const struct clk_ops	*ops;
-	struct clk_hw		*hw;
-	struct clk		*parent;
-	char			**parent_names;
-	struct clk		**parents;
-	u8			num_parents;
-	unsigned long		rate;
-	unsigned long		new_rate;
-	unsigned long		flags;
-	unsigned int		enable_count;
-	unsigned int		prepare_count;
-	struct hlist_head	children;
-	struct hlist_node	child_node;
-	unsigned int		notifier_count;
-#ifdef CONFIG_COMMON_CLK_DEBUG
-	struct dentry		*dentry;
-#endif
-};
-
-/*
- * DOC: Basic clock implementations common to many platforms
- *
- * Each basic clock hardware type is comprised of a structure describing the
- * clock hardware, implementations of the relevant callbacks in struct clk_ops,
- * unique flags for that hardware type, a registration function and an
- * alternative macro for static initialization
- */
-
-extern struct clk_ops clk_fixed_rate_ops;
-
-#define DEFINE_CLK_FIXED_RATE(_name, _flags, _rate,		\
-				_fixed_rate_flags)		\
-	static struct clk _name;				\
-	static char *_name##_parent_names[] = {};		\
-	static struct clk_fixed_rate _name##_hw = {		\
-		.hw = {						\
-			.clk = &_name,				\
-		},						\
-		.fixed_rate = _rate,				\
-		.flags = _fixed_rate_flags,			\
-	};							\
-	static struct clk _name = {				\
-		.name = #_name,					\
-		.ops = &clk_fixed_rate_ops,			\
-		.hw = &_name##_hw.hw,				\
-		.parent_names = _name##_parent_names,		\
-		.num_parents =					\
-			ARRAY_SIZE(_name##_parent_names),	\
-		.flags = _flags,				\
-	};
-
-extern struct clk_ops clk_gate_ops;
-
-#define DEFINE_CLK_GATE(_name, _parent_name, _parent_ptr,	\
-				_flags, _reg, _bit_idx,		\
-				_gate_flags, _lock)		\
-	static struct clk _name;				\
-	static char *_name##_parent_names[] = {			\
-		_parent_name,					\
-	};							\
-	static struct clk *_name##_parents[] = {		\
-		_parent_ptr,					\
-	};							\
-	static struct clk_gate _name##_hw = {			\
-		.hw = {						\
-			.clk = &_name,				\
-		},						\
-		.reg = _reg,					\
-		.bit_idx = _bit_idx,				\
-		.flags = _gate_flags,				\
-		.lock = _lock,					\
-	};							\
-	static struct clk _name = {				\
-		.name = #_name,					\
-		.ops = &clk_gate_ops,				\
-		.hw = &_name##_hw.hw,				\
-		.parent_names = _name##_parent_names,		\
-		.num_parents =					\
-			ARRAY_SIZE(_name##_parent_names),	\
-		.parents = _name##_parents,			\
-		.flags = _flags,				\
-	};
-
-extern struct clk_ops clk_divider_ops;
-
-#define DEFINE_CLK_DIVIDER(_name, _parent_name, _parent_ptr,	\
-				_flags, _reg, _shift, _width,	\
-				_divider_flags, _lock)		\
-	static struct clk _name;				\
-	static char *_name##_parent_names[] = {			\
-		_parent_name,					\
-	};							\
-	static struct clk *_name##_parents[] = {		\
-		_parent_ptr,					\
-	};							\
-	static struct clk_divider _name##_hw = {		\
-		.hw = {						\
-			.clk = &_name,				\
-		},						\
-		.reg = _reg,					\
-		.shift = _shift,				\
-		.width = _width,				\
-		.flags = _divider_flags,			\
-		.lock = _lock,					\
-	};							\
-	static struct clk _name = {				\
-		.name = #_name,					\
-		.ops = &clk_divider_ops,			\
-		.hw = &_name##_hw.hw,				\
-		.parent_names = _name##_parent_names,		\
-		.num_parents =					\
-			ARRAY_SIZE(_name##_parent_names),	\
-		.parents = _name##_parents,			\
-		.flags = _flags,				\
-	};
-
-extern struct clk_ops clk_mux_ops;
-
-#define DEFINE_CLK_MUX(_name, _parent_names, _parents, _flags,	\
-				_reg, _shift, _width,		\
-				_mux_flags, _lock)		\
-	static struct clk _name;				\
-	static struct clk_mux _name##_hw = {			\
-		.hw = {						\
-			.clk = &_name,				\
-		},						\
-		.reg = _reg,					\
-		.shift = _shift,				\
-		.width = _width,				\
-		.flags = _mux_flags,				\
-		.lock = _lock,					\
-	};							\
-	static struct clk _name = {				\
-		.name = #_name,					\
-		.ops = &clk_mux_ops,				\
-		.hw = &_name##_hw.hw,				\
-		.parent_names = _parent_names,			\
-		.num_parents =					\
-			ARRAY_SIZE(_parent_names),		\
-		.parents = _parents,				\
-		.flags = _flags,				\
-	};
-
-/**
- * __clk_init - initialize the data structures in a struct clk
- * @dev:	device initializing this clk, placeholder for now
- * @clk:	clk being initialized
- *
- * Initializes the lists in struct clk, queries the hardware for the
- * parent and rate and sets them both.
- *
- * Any struct clk passed into __clk_init must have the following members
- * populated:
- * 	.name
- * 	.ops
- * 	.hw
- * 	.parent_names
- * 	.num_parents
- * 	.flags
- *
- * It is not necessary to call clk_register if __clk_init is used directly with
- * statically initialized clock data.
- */
-void __clk_init(struct device *dev, struct clk *clk);
-
-#endif /* CONFIG_COMMON_CLK */
-#endif /* CLK_PRIVATE_H */
diff --git a/ANDROID_3.4.5/include/linux/clk-provider.h b/ANDROID_3.4.5/include/linux/clk-provider.h
deleted file mode 100644
index 5508897a..00000000
--- a/ANDROID_3.4.5/include/linux/clk-provider.h
+++ /dev/null
@@ -1,300 +0,0 @@
-/*
- *  linux/include/linux/clk-provider.h
- *
- *  Copyright (c) 2010-2011 Jeremy Kerr <jeremy.kerr@canonical.com>
- *  Copyright (C) 2011-2012 Linaro Ltd <mturquette@linaro.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __LINUX_CLK_PROVIDER_H
-#define __LINUX_CLK_PROVIDER_H
-
-#include <linux/clk.h>
-
-#ifdef CONFIG_COMMON_CLK
-
-/**
- * struct clk_hw - handle for traversing from a struct clk to its corresponding
- * hardware-specific structure.  struct clk_hw should be declared within struct
- * clk_foo and then referenced by the struct clk instance that uses struct
- * clk_foo's clk_ops
- *
- * clk: pointer to the struct clk instance that points back to this struct
- * clk_hw instance
- */
-struct clk_hw {
-	struct clk *clk;
-};
-
-/*
- * flags used across common struct clk.  these flags should only affect the
- * top-level framework.  custom flags for dealing with hardware specifics
- * belong in struct clk_foo
- */
-#define CLK_SET_RATE_GATE	BIT(0) /* must be gated across rate change */
-#define CLK_SET_PARENT_GATE	BIT(1) /* must be gated across re-parent */
-#define CLK_SET_RATE_PARENT	BIT(2) /* propagate rate change up one level */
-#define CLK_IGNORE_UNUSED	BIT(3) /* do not gate even if unused */
-#define CLK_IS_ROOT		BIT(4) /* root clk, has no parent */
-
-/**
- * struct clk_ops -  Callback operations for hardware clocks; these are to
- * be provided by the clock implementation, and will be called by drivers
- * through the clk_* api.
- *
- * @prepare:	Prepare the clock for enabling. This must not return until
- * 		the clock is fully prepared, and it's safe to call clk_enable.
- * 		This callback is intended to allow clock implementations to
- * 		do any initialisation that may sleep. Called with
- * 		prepare_lock held.
- *
- * @unprepare:	Release the clock from its prepared state. This will typically
- * 		undo any work done in the @prepare callback. Called with
- * 		prepare_lock held.
- *
- * @enable:	Enable the clock atomically. This must not return until the
- * 		clock is generating a valid clock signal, usable by consumer
- * 		devices. Called with enable_lock held. This function must not
- * 		sleep.
- *
- * @disable:	Disable the clock atomically. Called with enable_lock held.
- * 		This function must not sleep.
- *
- * @recalc_rate	Recalculate the rate of this clock, by quering hardware.  The
- * 		parent rate is an input parameter.  It is up to the caller to
- * 		insure that the prepare_mutex is held across this call.
- * 		Returns the calculated rate.  Optional, but recommended - if
- * 		this op is not set then clock rate will be initialized to 0.
- *
- * @round_rate:	Given a target rate as input, returns the closest rate actually
- * 		supported by the clock.
- *
- * @get_parent:	Queries the hardware to determine the parent of a clock.  The
- * 		return value is a u8 which specifies the index corresponding to
- * 		the parent clock.  This index can be applied to either the
- * 		.parent_names or .parents arrays.  In short, this function
- * 		translates the parent value read from hardware into an array
- * 		index.  Currently only called when the clock is initialized by
- * 		__clk_init.  This callback is mandatory for clocks with
- * 		multiple parents.  It is optional (and unnecessary) for clocks
- * 		with 0 or 1 parents.
- *
- * @set_parent:	Change the input source of this clock; for clocks with multiple
- * 		possible parents specify a new parent by passing in the index
- * 		as a u8 corresponding to the parent in either the .parent_names
- * 		or .parents arrays.  This function in affect translates an
- * 		array index into the value programmed into the hardware.
- * 		Returns 0 on success, -EERROR otherwise.
- *
- * @set_rate:	Change the rate of this clock. If this callback returns
- * 		CLK_SET_RATE_PARENT, the rate change will be propagated to the
- * 		parent clock (which may propagate again if the parent clock
- * 		also sets this flag). The requested rate of the parent is
- * 		passed back from the callback in the second 'unsigned long *'
- * 		argument.  Note that it is up to the hardware clock's set_rate
- * 		implementation to insure that clocks do not run out of spec
- * 		when propgating the call to set_rate up to the parent.  One way
- * 		to do this is to gate the clock (via clk_disable and/or
- * 		clk_unprepare) before calling clk_set_rate, then ungating it
- * 		afterward.  If your clock also has the CLK_GATE_SET_RATE flag
- * 		set then this will insure safety.  Returns 0 on success,
- * 		-EERROR otherwise.
- *
- * The clk_enable/clk_disable and clk_prepare/clk_unprepare pairs allow
- * implementations to split any work between atomic (enable) and sleepable
- * (prepare) contexts.  If enabling a clock requires code that might sleep,
- * this must be done in clk_prepare.  Clock enable code that will never be
- * called in a sleepable context may be implement in clk_enable.
- *
- * Typically, drivers will call clk_prepare when a clock may be needed later
- * (eg. when a device is opened), and clk_enable when the clock is actually
- * required (eg. from an interrupt). Note that clk_prepare MUST have been
- * called before clk_enable.
- */
-struct clk_ops {
-	int		(*prepare)(struct clk_hw *hw);
-	void		(*unprepare)(struct clk_hw *hw);
-	int		(*enable)(struct clk_hw *hw);
-	void		(*disable)(struct clk_hw *hw);
-	int		(*is_enabled)(struct clk_hw *hw);
-	unsigned long	(*recalc_rate)(struct clk_hw *hw,
-					unsigned long parent_rate);
-	long		(*round_rate)(struct clk_hw *hw, unsigned long,
-					unsigned long *);
-	int		(*set_parent)(struct clk_hw *hw, u8 index);
-	u8		(*get_parent)(struct clk_hw *hw);
-	int		(*set_rate)(struct clk_hw *hw, unsigned long);
-	void		(*init)(struct clk_hw *hw);
-};
-
-/*
- * DOC: Basic clock implementations common to many platforms
- *
- * Each basic clock hardware type is comprised of a structure describing the
- * clock hardware, implementations of the relevant callbacks in struct clk_ops,
- * unique flags for that hardware type, a registration function and an
- * alternative macro for static initialization
- */
-
-/**
- * struct clk_fixed_rate - fixed-rate clock
- * @hw:		handle between common and hardware-specific interfaces
- * @fixed_rate:	constant frequency of clock
- */
-struct clk_fixed_rate {
-	struct		clk_hw hw;
-	unsigned long	fixed_rate;
-	u8		flags;
-};
-
-struct clk *clk_register_fixed_rate(struct device *dev, const char *name,
-		const char *parent_name, unsigned long flags,
-		unsigned long fixed_rate);
-
-/**
- * struct clk_gate - gating clock
- *
- * @hw:		handle between common and hardware-specific interfaces
- * @reg:	register controlling gate
- * @bit_idx:	single bit controlling gate
- * @flags:	hardware-specific flags
- * @lock:	register lock
- *
- * Clock which can gate its output.  Implements .enable & .disable
- *
- * Flags:
- * CLK_GATE_SET_DISABLE - by default this clock sets the bit at bit_idx to
- * 	enable the clock.  Setting this flag does the opposite: setting the bit
- * 	disable the clock and clearing it enables the clock
- */
-struct clk_gate {
-	struct clk_hw hw;
-	void __iomem	*reg;
-	u8		bit_idx;
-	u8		flags;
-	spinlock_t	*lock;
-	char		*parent[1];
-};
-
-#define CLK_GATE_SET_TO_DISABLE		BIT(0)
-
-struct clk *clk_register_gate(struct device *dev, const char *name,
-		const char *parent_name, unsigned long flags,
-		void __iomem *reg, u8 bit_idx,
-		u8 clk_gate_flags, spinlock_t *lock);
-
-/**
- * struct clk_divider - adjustable divider clock
- *
- * @hw:		handle between common and hardware-specific interfaces
- * @reg:	register containing the divider
- * @shift:	shift to the divider bit field
- * @width:	width of the divider bit field
- * @lock:	register lock
- *
- * Clock with an adjustable divider affecting its output frequency.  Implements
- * .recalc_rate, .set_rate and .round_rate
- *
- * Flags:
- * CLK_DIVIDER_ONE_BASED - by default the divisor is the value read from the
- * 	register plus one.  If CLK_DIVIDER_ONE_BASED is set then the divider is
- * 	the raw value read from the register, with the value of zero considered
- * 	invalid
- * CLK_DIVIDER_POWER_OF_TWO - clock divisor is 2 raised to the value read from
- * 	the hardware register
- */
-struct clk_divider {
-	struct clk_hw	hw;
-	void __iomem	*reg;
-	u8		shift;
-	u8		width;
-	u8		flags;
-	spinlock_t	*lock;
-	char		*parent[1];
-};
-
-#define CLK_DIVIDER_ONE_BASED		BIT(0)
-#define CLK_DIVIDER_POWER_OF_TWO	BIT(1)
-
-struct clk *clk_register_divider(struct device *dev, const char *name,
-		const char *parent_name, unsigned long flags,
-		void __iomem *reg, u8 shift, u8 width,
-		u8 clk_divider_flags, spinlock_t *lock);
-
-/**
- * struct clk_mux - multiplexer clock
- *
- * @hw:		handle between common and hardware-specific interfaces
- * @reg:	register controlling multiplexer
- * @shift:	shift to multiplexer bit field
- * @width:	width of mutliplexer bit field
- * @num_clks:	number of parent clocks
- * @lock:	register lock
- *
- * Clock with multiple selectable parents.  Implements .get_parent, .set_parent
- * and .recalc_rate
- *
- * Flags:
- * CLK_MUX_INDEX_ONE - register index starts at 1, not 0
- * CLK_MUX_INDEX_BITWISE - register index is a single bit (power of two)
- */
-struct clk_mux {
-	struct clk_hw	hw;
-	void __iomem	*reg;
-	u8		shift;
-	u8		width;
-	u8		flags;
-	spinlock_t	*lock;
-};
-
-#define CLK_MUX_INDEX_ONE		BIT(0)
-#define CLK_MUX_INDEX_BIT		BIT(1)
-
-struct clk *clk_register_mux(struct device *dev, const char *name,
-		char **parent_names, u8 num_parents, unsigned long flags,
-		void __iomem *reg, u8 shift, u8 width,
-		u8 clk_mux_flags, spinlock_t *lock);
-
-/**
- * clk_register - allocate a new clock, register it and return an opaque cookie
- * @dev: device that is registering this clock
- * @name: clock name
- * @ops: operations this clock supports
- * @hw: link to hardware-specific clock data
- * @parent_names: array of string names for all possible parents
- * @num_parents: number of possible parents
- * @flags: framework-level hints and quirks
- *
- * clk_register is the primary interface for populating the clock tree with new
- * clock nodes.  It returns a pointer to the newly allocated struct clk which
- * cannot be dereferenced by driver code but may be used in conjuction with the
- * rest of the clock API.
- */
-struct clk *clk_register(struct device *dev, const char *name,
-		const struct clk_ops *ops, struct clk_hw *hw,
-		char **parent_names, u8 num_parents, unsigned long flags);
-
-/* helper functions */
-const char *__clk_get_name(struct clk *clk);
-struct clk_hw *__clk_get_hw(struct clk *clk);
-u8 __clk_get_num_parents(struct clk *clk);
-struct clk *__clk_get_parent(struct clk *clk);
-inline int __clk_get_enable_count(struct clk *clk);
-inline int __clk_get_prepare_count(struct clk *clk);
-unsigned long __clk_get_rate(struct clk *clk);
-unsigned long __clk_get_flags(struct clk *clk);
-int __clk_is_enabled(struct clk *clk);
-struct clk *__clk_lookup(const char *name);
-
-/*
- * FIXME clock api without lock protection
- */
-int __clk_prepare(struct clk *clk);
-void __clk_unprepare(struct clk *clk);
-void __clk_reparent(struct clk *clk, struct clk *new_parent);
-unsigned long __clk_round_rate(struct clk *clk, unsigned long rate);
-
-#endif /* CONFIG_COMMON_CLK */
-#endif /* CLK_PROVIDER_H */
diff --git a/ANDROID_3.4.5/include/linux/clk.h b/ANDROID_3.4.5/include/linux/clk.h
deleted file mode 100644
index b0252726..00000000
--- a/ANDROID_3.4.5/include/linux/clk.h
+++ /dev/null
@@ -1,281 +0,0 @@
-/*
- *  linux/include/linux/clk.h
- *
- *  Copyright (C) 2004 ARM Limited.
- *  Written by Deep Blue Solutions Limited.
- *  Copyright (C) 2011-2012 Linaro Ltd <mturquette@linaro.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __LINUX_CLK_H
-#define __LINUX_CLK_H
-
-#include <linux/kernel.h>
-#include <linux/notifier.h>
-
-struct device;
-
-struct clk;
-
-#ifdef CONFIG_COMMON_CLK
-
-/**
- * DOC: clk notifier callback types
- *
- * PRE_RATE_CHANGE - called immediately before the clk rate is changed,
- *     to indicate that the rate change will proceed.  Drivers must
- *     immediately terminate any operations that will be affected by the
- *     rate change.  Callbacks may either return NOTIFY_DONE or
- *     NOTIFY_STOP.
- *
- * ABORT_RATE_CHANGE: called if the rate change failed for some reason
- *     after PRE_RATE_CHANGE.  In this case, all registered notifiers on
- *     the clk will be called with ABORT_RATE_CHANGE. Callbacks must
- *     always return NOTIFY_DONE.
- *
- * POST_RATE_CHANGE - called after the clk rate change has successfully
- *     completed.  Callbacks must always return NOTIFY_DONE.
- *
- */
-#define PRE_RATE_CHANGE			BIT(0)
-#define POST_RATE_CHANGE		BIT(1)
-#define ABORT_RATE_CHANGE		BIT(2)
-
-/**
- * struct clk_notifier - associate a clk with a notifier
- * @clk: struct clk * to associate the notifier with
- * @notifier_head: a blocking_notifier_head for this clk
- * @node: linked list pointers
- *
- * A list of struct clk_notifier is maintained by the notifier code.
- * An entry is created whenever code registers the first notifier on a
- * particular @clk.  Future notifiers on that @clk are added to the
- * @notifier_head.
- */
-struct clk_notifier {
-	struct clk			*clk;
-	struct srcu_notifier_head	notifier_head;
-	struct list_head		node;
-};
-
-/**
- * struct clk_notifier_data - rate data to pass to the notifier callback
- * @clk: struct clk * being changed
- * @old_rate: previous rate of this clk
- * @new_rate: new rate of this clk
- *
- * For a pre-notifier, old_rate is the clk's rate before this rate
- * change, and new_rate is what the rate will be in the future.  For a
- * post-notifier, old_rate and new_rate are both set to the clk's
- * current rate (this was done to optimize the implementation).
- */
-struct clk_notifier_data {
-	struct clk		*clk;
-	unsigned long		old_rate;
-	unsigned long		new_rate;
-};
-
-int clk_notifier_register(struct clk *clk, struct notifier_block *nb);
-
-int clk_notifier_unregister(struct clk *clk, struct notifier_block *nb);
-
-#endif /* !CONFIG_COMMON_CLK */
-
-/**
- * clk_get - lookup and obtain a reference to a clock producer.
- * @dev: device for clock "consumer"
- * @id: clock comsumer ID
- *
- * Returns a struct clk corresponding to the clock producer, or
- * valid IS_ERR() condition containing errno.  The implementation
- * uses @dev and @id to determine the clock consumer, and thereby
- * the clock producer.  (IOW, @id may be identical strings, but
- * clk_get may return different clock producers depending on @dev.)
- *
- * Drivers must assume that the clock source is not enabled.
- *
- * clk_get should not be called from within interrupt context.
- */
-struct clk *clk_get(struct device *dev, const char *id);
-
-/**
- * clk_prepare - prepare a clock source
- * @clk: clock source
- *
- * This prepares the clock source for use.
- *
- * Must not be called from within atomic context.
- */
-#ifdef CONFIG_HAVE_CLK_PREPARE
-int clk_prepare(struct clk *clk);
-#else
-static inline int clk_prepare(struct clk *clk)
-{
-	might_sleep();
-	return 0;
-}
-#endif
-
-/**
- * clk_enable - inform the system when the clock source should be running.
- * @clk: clock source
- *
- * If the clock can not be enabled/disabled, this should return success.
- *
- * May be called from atomic contexts.
- *
- * Returns success (0) or negative errno.
- */
-int clk_enable(struct clk *clk);
-
-/**
- * clk_disable - inform the system when the clock source is no longer required.
- * @clk: clock source
- *
- * Inform the system that a clock source is no longer required by
- * a driver and may be shut down.
- *
- * May be called from atomic contexts.
- *
- * Implementation detail: if the clock source is shared between
- * multiple drivers, clk_enable() calls must be balanced by the
- * same number of clk_disable() calls for the clock source to be
- * disabled.
- */
-void clk_disable(struct clk *clk);
-
-
-/**
- * clk_unprepare - undo preparation of a clock source
- * @clk: clock source
- *
- * This undoes a previously prepared clock.  The caller must balance
- * the number of prepare and unprepare calls.
- *
- * Must not be called from within atomic context.
- */
-#ifdef CONFIG_HAVE_CLK_PREPARE
-void clk_unprepare(struct clk *clk);
-#else
-static inline void clk_unprepare(struct clk *clk)
-{
-	might_sleep();
-}
-#endif
-
-/* clk_prepare_enable helps cases using clk_enable in non-atomic context. */
-static inline int clk_prepare_enable(struct clk *clk)
-{
-	int ret;
-
-	ret = clk_prepare(clk);
-	if (ret)
-		return ret;
-	ret = clk_enable(clk);
-	if (ret)
-		clk_unprepare(clk);
-
-	return ret;
-}
-
-/* clk_disable_unprepare helps cases using clk_disable in non-atomic context. */
-static inline void clk_disable_unprepare(struct clk *clk)
-{
-	clk_disable(clk);
-	clk_unprepare(clk);
-}
-
-/**
- * clk_get_rate - obtain the current clock rate (in Hz) for a clock source.
- *		  This is only valid once the clock source has been enabled.
- * @clk: clock source
- */
-unsigned long clk_get_rate(struct clk *clk);
-
-/**
- * clk_put	- "free" the clock source
- * @clk: clock source
- *
- * Note: drivers must ensure that all clk_enable calls made on this
- * clock source are balanced by clk_disable calls prior to calling
- * this function.
- *
- * clk_put should not be called from within interrupt context.
- */
-void clk_put(struct clk *clk);
-
-
-/*
- * The remaining APIs are optional for machine class support.
- */
-
-
-/**
- * clk_round_rate - adjust a rate to the exact rate a clock can provide
- * @clk: clock source
- * @rate: desired clock rate in Hz
- *
- * Returns rounded clock rate in Hz, or negative errno.
- */
-long clk_round_rate(struct clk *clk, unsigned long rate);
- 
-/**
- * clk_set_rate - set the clock rate for a clock source
- * @clk: clock source
- * @rate: desired clock rate in Hz
- *
- * Returns success (0) or negative errno.
- */
-int clk_set_rate(struct clk *clk, unsigned long rate);
- 
-/**
- * clk_set_parent - set the parent clock source for this clock
- * @clk: clock source
- * @parent: parent clock source
- *
- * Returns success (0) or negative errno.
- */
-int clk_set_parent(struct clk *clk, struct clk *parent);
-
-/**
- * clk_get_parent - get the parent clock source for this clock
- * @clk: clock source
- *
- * Returns struct clk corresponding to parent clock source, or
- * valid IS_ERR() condition containing errno.
- */
-struct clk *clk_get_parent(struct clk *clk);
-
-/**
- * clk_get_sys - get a clock based upon the device name
- * @dev_id: device name
- * @con_id: connection ID
- *
- * Returns a struct clk corresponding to the clock producer, or
- * valid IS_ERR() condition containing errno.  The implementation
- * uses @dev_id and @con_id to determine the clock consumer, and
- * thereby the clock producer. In contrast to clk_get() this function
- * takes the device name instead of the device itself for identification.
- *
- * Drivers must assume that the clock source is not enabled.
- *
- * clk_get_sys should not be called from within interrupt context.
- */
-struct clk *clk_get_sys(const char *dev_id, const char *con_id);
-
-/**
- * clk_add_alias - add a new clock alias
- * @alias: name for clock alias
- * @alias_dev_name: device name
- * @id: platform specific clock name
- * @dev: device
- *
- * Allows using generic clock names for drivers by adding a new alias.
- * Assumes clkdev, see clkdev.h for more info.
- */
-int clk_add_alias(const char *alias, const char *alias_dev_name, char *id,
-			struct device *dev);
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/clkdev.h b/ANDROID_3.4.5/include/linux/clkdev.h
deleted file mode 100644
index d9a4fd02..00000000
--- a/ANDROID_3.4.5/include/linux/clkdev.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- *  include/linux/clkdev.h
- *
- *  Copyright (C) 2008 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Helper for the clk API to assist looking up a struct clk.
- */
-#ifndef __CLKDEV_H
-#define __CLKDEV_H
-
-#include <asm/clkdev.h>
-
-struct clk;
-struct device;
-
-struct clk_lookup {
-	struct list_head	node;
-	const char		*dev_id;
-	const char		*con_id;
-	struct clk		*clk;
-};
-
-#define CLKDEV_INIT(d, n, c)	\
-	{			\
-		.dev_id = d,	\
-		.con_id = n,	\
-		.clk = c,	\
-	}
-
-struct clk_lookup *clkdev_alloc(struct clk *clk, const char *con_id,
-	const char *dev_fmt, ...);
-
-void clkdev_add(struct clk_lookup *cl);
-void clkdev_drop(struct clk_lookup *cl);
-
-void clkdev_add_table(struct clk_lookup *, size_t);
-int clk_add_alias(const char *, const char *, char *, struct device *);
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/clksrc-dbx500-prcmu.h b/ANDROID_3.4.5/include/linux/clksrc-dbx500-prcmu.h
deleted file mode 100644
index 4fb8119c..00000000
--- a/ANDROID_3.4.5/include/linux/clksrc-dbx500-prcmu.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2011
- *
- * License Terms: GNU General Public License v2
- * Author: Mattias Wallin <mattias.wallin@stericsson.com>
- *
- */
-#ifndef __CLKSRC_DBX500_PRCMU_H
-#define __CLKSRC_DBX500_PRCMU_H
-
-#include <linux/init.h>
-#include <linux/io.h>
-
-#ifdef CONFIG_CLKSRC_DBX500_PRCMU
-void __init clksrc_dbx500_prcmu_init(void __iomem *base);
-#else
-static inline void __init clksrc_dbx500_prcmu_init(void __iomem *base) {}
-#endif
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/clockchips.h b/ANDROID_3.4.5/include/linux/clockchips.h
deleted file mode 100644
index 81e803e9..00000000
--- a/ANDROID_3.4.5/include/linux/clockchips.h
+++ /dev/null
@@ -1,170 +0,0 @@
-/*  linux/include/linux/clockchips.h
- *
- *  This file contains the structure definitions for clockchips.
- *
- *  If you are not a clockchip, or the time of day code, you should
- *  not be including this file!
- */
-#ifndef _LINUX_CLOCKCHIPS_H
-#define _LINUX_CLOCKCHIPS_H
-
-#ifdef CONFIG_GENERIC_CLOCKEVENTS_BUILD
-
-#include <linux/clocksource.h>
-#include <linux/cpumask.h>
-#include <linux/ktime.h>
-#include <linux/notifier.h>
-
-struct clock_event_device;
-
-/* Clock event mode commands */
-enum clock_event_mode {
-	CLOCK_EVT_MODE_UNUSED = 0,
-	CLOCK_EVT_MODE_SHUTDOWN,
-	CLOCK_EVT_MODE_PERIODIC,
-	CLOCK_EVT_MODE_ONESHOT,
-	CLOCK_EVT_MODE_RESUME,
-};
-
-/* Clock event notification values */
-enum clock_event_nofitiers {
-	CLOCK_EVT_NOTIFY_ADD,
-	CLOCK_EVT_NOTIFY_BROADCAST_ON,
-	CLOCK_EVT_NOTIFY_BROADCAST_OFF,
-	CLOCK_EVT_NOTIFY_BROADCAST_FORCE,
-	CLOCK_EVT_NOTIFY_BROADCAST_ENTER,
-	CLOCK_EVT_NOTIFY_BROADCAST_EXIT,
-	CLOCK_EVT_NOTIFY_SUSPEND,
-	CLOCK_EVT_NOTIFY_RESUME,
-	CLOCK_EVT_NOTIFY_CPU_DYING,
-	CLOCK_EVT_NOTIFY_CPU_DEAD,
-};
-
-/*
- * Clock event features
- */
-#define CLOCK_EVT_FEAT_PERIODIC		0x000001
-#define CLOCK_EVT_FEAT_ONESHOT		0x000002
-#define CLOCK_EVT_FEAT_KTIME		0x000004
-/*
- * x86(64) specific misfeatures:
- *
- * - Clockevent source stops in C3 State and needs broadcast support.
- * - Local APIC timer is used as a dummy device.
- */
-#define CLOCK_EVT_FEAT_C3STOP		0x000008
-#define CLOCK_EVT_FEAT_DUMMY		0x000010
-
-/**
- * struct clock_event_device - clock event device descriptor
- * @event_handler:	Assigned by the framework to be called by the low
- *			level handler of the event source
- * @set_next_event:	set next event function using a clocksource delta
- * @set_next_ktime:	set next event function using a direct ktime value
- * @next_event:		local storage for the next event in oneshot mode
- * @max_delta_ns:	maximum delta value in ns
- * @min_delta_ns:	minimum delta value in ns
- * @mult:		nanosecond to cycles multiplier
- * @shift:		nanoseconds to cycles divisor (power of two)
- * @mode:		operating mode assigned by the management code
- * @features:		features
- * @retries:		number of forced programming retries
- * @set_mode:		set mode function
- * @broadcast:		function to broadcast events
- * @min_delta_ticks:	minimum delta value in ticks stored for reconfiguration
- * @max_delta_ticks:	maximum delta value in ticks stored for reconfiguration
- * @name:		ptr to clock event name
- * @rating:		variable to rate clock event devices
- * @irq:		IRQ number (only for non CPU local devices)
- * @cpumask:		cpumask to indicate for which CPUs this device works
- * @list:		list head for the management code
- */
-struct clock_event_device {
-	void			(*event_handler)(struct clock_event_device *);
-	int			(*set_next_event)(unsigned long evt,
-						  struct clock_event_device *);
-	int			(*set_next_ktime)(ktime_t expires,
-						  struct clock_event_device *);
-	ktime_t			next_event;
-	u64			max_delta_ns;
-	u64			min_delta_ns;
-	u32			mult;
-	u32			shift;
-	enum clock_event_mode	mode;
-	unsigned int		features;
-	unsigned long		retries;
-
-	void			(*broadcast)(const struct cpumask *mask);
-	void			(*set_mode)(enum clock_event_mode mode,
-					    struct clock_event_device *);
-	unsigned long		min_delta_ticks;
-	unsigned long		max_delta_ticks;
-
-	const char		*name;
-	int			rating;
-	int			irq;
-	const struct cpumask	*cpumask;
-	struct list_head	list;
-} ____cacheline_aligned;
-
-/*
- * Calculate a multiplication factor for scaled math, which is used to convert
- * nanoseconds based values to clock ticks:
- *
- * clock_ticks = (nanoseconds * factor) >> shift.
- *
- * div_sc is the rearranged equation to calculate a factor from a given clock
- * ticks / nanoseconds ratio:
- *
- * factor = (clock_ticks << shift) / nanoseconds
- */
-static inline unsigned long div_sc(unsigned long ticks, unsigned long nsec,
-				   int shift)
-{
-	uint64_t tmp = ((uint64_t)ticks) << shift;
-
-	do_div(tmp, nsec);
-	return (unsigned long) tmp;
-}
-
-/* Clock event layer functions */
-extern u64 clockevent_delta2ns(unsigned long latch,
-			       struct clock_event_device *evt);
-extern void clockevents_register_device(struct clock_event_device *dev);
-
-extern void clockevents_config_and_register(struct clock_event_device *dev,
-					    u32 freq, unsigned long min_delta,
-					    unsigned long max_delta);
-
-extern int clockevents_update_freq(struct clock_event_device *ce, u32 freq);
-
-extern void clockevents_exchange_device(struct clock_event_device *old,
-					struct clock_event_device *new);
-extern void clockevents_set_mode(struct clock_event_device *dev,
-				 enum clock_event_mode mode);
-extern int clockevents_register_notifier(struct notifier_block *nb);
-extern int clockevents_program_event(struct clock_event_device *dev,
-				     ktime_t expires, bool force);
-
-extern void clockevents_handle_noop(struct clock_event_device *dev);
-
-static inline void
-clockevents_calc_mult_shift(struct clock_event_device *ce, u32 freq, u32 minsec)
-{
-	return clocks_calc_mult_shift(&ce->mult, &ce->shift, NSEC_PER_SEC,
-				      freq, minsec);
-}
-
-#ifdef CONFIG_GENERIC_CLOCKEVENTS
-extern void clockevents_notify(unsigned long reason, void *arg);
-#else
-# define clockevents_notify(reason, arg) do { } while (0)
-#endif
-
-#else /* CONFIG_GENERIC_CLOCKEVENTS_BUILD */
-
-#define clockevents_notify(reason, arg) do { } while (0)
-
-#endif
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/clocksource.h b/ANDROID_3.4.5/include/linux/clocksource.h
deleted file mode 100644
index fbe89e17..00000000
--- a/ANDROID_3.4.5/include/linux/clocksource.h
+++ /dev/null
@@ -1,351 +0,0 @@
-/*  linux/include/linux/clocksource.h
- *
- *  This file contains the structure definitions for clocksources.
- *
- *  If you are not a clocksource, or timekeeping code, you should
- *  not be including this file!
- */
-#ifndef _LINUX_CLOCKSOURCE_H
-#define _LINUX_CLOCKSOURCE_H
-
-#include <linux/types.h>
-#include <linux/timex.h>
-#include <linux/time.h>
-#include <linux/list.h>
-#include <linux/cache.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <asm/div64.h>
-#include <asm/io.h>
-
-/* clocksource cycle base type */
-typedef u64 cycle_t;
-struct clocksource;
-
-#ifdef CONFIG_ARCH_CLOCKSOURCE_DATA
-#include <asm/clocksource.h>
-#endif
-
-/**
- * struct cyclecounter - hardware abstraction for a free running counter
- *	Provides completely state-free accessors to the underlying hardware.
- *	Depending on which hardware it reads, the cycle counter may wrap
- *	around quickly. Locking rules (if necessary) have to be defined
- *	by the implementor and user of specific instances of this API.
- *
- * @read:		returns the current cycle value
- * @mask:		bitmask for two's complement
- *			subtraction of non 64 bit counters,
- *			see CLOCKSOURCE_MASK() helper macro
- * @mult:		cycle to nanosecond multiplier
- * @shift:		cycle to nanosecond divisor (power of two)
- */
-struct cyclecounter {
-	cycle_t (*read)(const struct cyclecounter *cc);
-	cycle_t mask;
-	u32 mult;
-	u32 shift;
-};
-
-/**
- * struct timecounter - layer above a %struct cyclecounter which counts nanoseconds
- *	Contains the state needed by timecounter_read() to detect
- *	cycle counter wrap around. Initialize with
- *	timecounter_init(). Also used to convert cycle counts into the
- *	corresponding nanosecond counts with timecounter_cyc2time(). Users
- *	of this code are responsible for initializing the underlying
- *	cycle counter hardware, locking issues and reading the time
- *	more often than the cycle counter wraps around. The nanosecond
- *	counter will only wrap around after ~585 years.
- *
- * @cc:			the cycle counter used by this instance
- * @cycle_last:		most recent cycle counter value seen by
- *			timecounter_read()
- * @nsec:		continuously increasing count
- */
-struct timecounter {
-	const struct cyclecounter *cc;
-	cycle_t cycle_last;
-	u64 nsec;
-};
-
-/**
- * cyclecounter_cyc2ns - converts cycle counter cycles to nanoseconds
- * @cc:		Pointer to cycle counter.
- * @cycles:	Cycles
- *
- * XXX - This could use some mult_lxl_ll() asm optimization. Same code
- * as in cyc2ns, but with unsigned result.
- */
-static inline u64 cyclecounter_cyc2ns(const struct cyclecounter *cc,
-				      cycle_t cycles)
-{
-	u64 ret = (u64)cycles;
-	ret = (ret * cc->mult) >> cc->shift;
-	return ret;
-}
-
-/**
- * timecounter_init - initialize a time counter
- * @tc:			Pointer to time counter which is to be initialized/reset
- * @cc:			A cycle counter, ready to be used.
- * @start_tstamp:	Arbitrary initial time stamp.
- *
- * After this call the current cycle register (roughly) corresponds to
- * the initial time stamp. Every call to timecounter_read() increments
- * the time stamp counter by the number of elapsed nanoseconds.
- */
-extern void timecounter_init(struct timecounter *tc,
-			     const struct cyclecounter *cc,
-			     u64 start_tstamp);
-
-/**
- * timecounter_read - return nanoseconds elapsed since timecounter_init()
- *                    plus the initial time stamp
- * @tc:          Pointer to time counter.
- *
- * In other words, keeps track of time since the same epoch as
- * the function which generated the initial time stamp.
- */
-extern u64 timecounter_read(struct timecounter *tc);
-
-/**
- * timecounter_cyc2time - convert a cycle counter to same
- *                        time base as values returned by
- *                        timecounter_read()
- * @tc:		Pointer to time counter.
- * @cycle_tstamp:	a value returned by tc->cc->read()
- *
- * Cycle counts that are converted correctly as long as they
- * fall into the interval [-1/2 max cycle count, +1/2 max cycle count],
- * with "max cycle count" == cs->mask+1.
- *
- * This allows conversion of cycle counter values which were generated
- * in the past.
- */
-extern u64 timecounter_cyc2time(struct timecounter *tc,
-				cycle_t cycle_tstamp);
-
-/**
- * struct clocksource - hardware abstraction for a free running counter
- *	Provides mostly state-free accessors to the underlying hardware.
- *	This is the structure used for system time.
- *
- * @name:		ptr to clocksource name
- * @list:		list head for registration
- * @rating:		rating value for selection (higher is better)
- *			To avoid rating inflation the following
- *			list should give you a guide as to how
- *			to assign your clocksource a rating
- *			1-99: Unfit for real use
- *				Only available for bootup and testing purposes.
- *			100-199: Base level usability.
- *				Functional for real use, but not desired.
- *			200-299: Good.
- *				A correct and usable clocksource.
- *			300-399: Desired.
- *				A reasonably fast and accurate clocksource.
- *			400-499: Perfect
- *				The ideal clocksource. A must-use where
- *				available.
- * @read:		returns a cycle value, passes clocksource as argument
- * @enable:		optional function to enable the clocksource
- * @disable:		optional function to disable the clocksource
- * @mask:		bitmask for two's complement
- *			subtraction of non 64 bit counters
- * @mult:		cycle to nanosecond multiplier
- * @shift:		cycle to nanosecond divisor (power of two)
- * @max_idle_ns:	max idle time permitted by the clocksource (nsecs)
- * @maxadj:		maximum adjustment value to mult (~11%)
- * @flags:		flags describing special properties
- * @archdata:		arch-specific data
- * @suspend:		suspend function for the clocksource, if necessary
- * @resume:		resume function for the clocksource, if necessary
- * @cycle_last:		most recent cycle counter value seen by ::read()
- */
-struct clocksource {
-	/*
-	 * Hotpath data, fits in a single cache line when the
-	 * clocksource itself is cacheline aligned.
-	 */
-	cycle_t (*read)(struct clocksource *cs);
-	cycle_t cycle_last;
-	cycle_t mask;
-	u32 mult;
-	u32 shift;
-	u64 max_idle_ns;
-	u32 maxadj;
-#ifdef CONFIG_ARCH_CLOCKSOURCE_DATA
-	struct arch_clocksource_data archdata;
-#endif
-
-	const char *name;
-	struct list_head list;
-	int rating;
-	int (*enable)(struct clocksource *cs);
-	void (*disable)(struct clocksource *cs);
-	unsigned long flags;
-	void (*suspend)(struct clocksource *cs);
-	void (*resume)(struct clocksource *cs);
-
-	/* private: */
-#ifdef CONFIG_CLOCKSOURCE_WATCHDOG
-	/* Watchdog related data, used by the framework */
-	struct list_head wd_list;
-	cycle_t cs_last;
-	cycle_t wd_last;
-#endif
-} ____cacheline_aligned;
-
-/*
- * Clock source flags bits::
- */
-#define CLOCK_SOURCE_IS_CONTINUOUS		0x01
-#define CLOCK_SOURCE_MUST_VERIFY		0x02
-
-#define CLOCK_SOURCE_WATCHDOG			0x10
-#define CLOCK_SOURCE_VALID_FOR_HRES		0x20
-#define CLOCK_SOURCE_UNSTABLE			0x40
-
-/* simplify initialization of mask field */
-#define CLOCKSOURCE_MASK(bits) (cycle_t)((bits) < 64 ? ((1ULL<<(bits))-1) : -1)
-
-/**
- * clocksource_khz2mult - calculates mult from khz and shift
- * @khz:		Clocksource frequency in KHz
- * @shift_constant:	Clocksource shift factor
- *
- * Helper functions that converts a khz counter frequency to a timsource
- * multiplier, given the clocksource shift value
- */
-static inline u32 clocksource_khz2mult(u32 khz, u32 shift_constant)
-{
-	/*  khz = cyc/(Million ns)
-	 *  mult/2^shift  = ns/cyc
-	 *  mult = ns/cyc * 2^shift
-	 *  mult = 1Million/khz * 2^shift
-	 *  mult = 1000000 * 2^shift / khz
-	 *  mult = (1000000<<shift) / khz
-	 */
-	u64 tmp = ((u64)1000000) << shift_constant;
-
-	tmp += khz/2; /* round for do_div */
-	do_div(tmp, khz);
-
-	return (u32)tmp;
-}
-
-/**
- * clocksource_hz2mult - calculates mult from hz and shift
- * @hz:			Clocksource frequency in Hz
- * @shift_constant:	Clocksource shift factor
- *
- * Helper functions that converts a hz counter
- * frequency to a timsource multiplier, given the
- * clocksource shift value
- */
-static inline u32 clocksource_hz2mult(u32 hz, u32 shift_constant)
-{
-	/*  hz = cyc/(Billion ns)
-	 *  mult/2^shift  = ns/cyc
-	 *  mult = ns/cyc * 2^shift
-	 *  mult = 1Billion/hz * 2^shift
-	 *  mult = 1000000000 * 2^shift / hz
-	 *  mult = (1000000000<<shift) / hz
-	 */
-	u64 tmp = ((u64)1000000000) << shift_constant;
-
-	tmp += hz/2; /* round for do_div */
-	do_div(tmp, hz);
-
-	return (u32)tmp;
-}
-
-/**
- * clocksource_cyc2ns - converts clocksource cycles to nanoseconds
- * @cycles:	cycles
- * @mult:	cycle to nanosecond multiplier
- * @shift:	cycle to nanosecond divisor (power of two)
- *
- * Converts cycles to nanoseconds, using the given mult and shift.
- *
- * XXX - This could use some mult_lxl_ll() asm optimization
- */
-static inline s64 clocksource_cyc2ns(cycle_t cycles, u32 mult, u32 shift)
-{
-	return ((u64) cycles * mult) >> shift;
-}
-
-
-extern int clocksource_register(struct clocksource*);
-extern void clocksource_unregister(struct clocksource*);
-extern void clocksource_touch_watchdog(void);
-extern struct clocksource* clocksource_get_next(void);
-extern void clocksource_change_rating(struct clocksource *cs, int rating);
-extern void clocksource_suspend(void);
-extern void clocksource_resume(void);
-extern struct clocksource * __init __weak clocksource_default_clock(void);
-extern void clocksource_mark_unstable(struct clocksource *cs);
-
-extern void
-clocks_calc_mult_shift(u32 *mult, u32 *shift, u32 from, u32 to, u32 minsec);
-
-/*
- * Don't call __clocksource_register_scale directly, use
- * clocksource_register_hz/khz
- */
-extern int
-__clocksource_register_scale(struct clocksource *cs, u32 scale, u32 freq);
-extern void
-__clocksource_updatefreq_scale(struct clocksource *cs, u32 scale, u32 freq);
-
-static inline int clocksource_register_hz(struct clocksource *cs, u32 hz)
-{
-	return __clocksource_register_scale(cs, 1, hz);
-}
-
-static inline int clocksource_register_khz(struct clocksource *cs, u32 khz)
-{
-	return __clocksource_register_scale(cs, 1000, khz);
-}
-
-static inline void __clocksource_updatefreq_hz(struct clocksource *cs, u32 hz)
-{
-	__clocksource_updatefreq_scale(cs, 1, hz);
-}
-
-static inline void __clocksource_updatefreq_khz(struct clocksource *cs, u32 khz)
-{
-	__clocksource_updatefreq_scale(cs, 1000, khz);
-}
-
-#ifdef CONFIG_GENERIC_TIME_VSYSCALL
-extern void
-update_vsyscall(struct timespec *ts, struct timespec *wtm,
-			struct clocksource *c, u32 mult);
-extern void update_vsyscall_tz(void);
-#else
-static inline void
-update_vsyscall(struct timespec *ts, struct timespec *wtm,
-			struct clocksource *c, u32 mult)
-{
-}
-
-static inline void update_vsyscall_tz(void)
-{
-}
-#endif
-
-extern void timekeeping_notify(struct clocksource *clock);
-
-extern cycle_t clocksource_mmio_readl_up(struct clocksource *);
-extern cycle_t clocksource_mmio_readl_down(struct clocksource *);
-extern cycle_t clocksource_mmio_readw_up(struct clocksource *);
-extern cycle_t clocksource_mmio_readw_down(struct clocksource *);
-
-extern int clocksource_mmio_init(void __iomem *, const char *,
-	unsigned long, int, unsigned, cycle_t (*)(struct clocksource *));
-
-extern int clocksource_i8253_init(void);
-
-#endif /* _LINUX_CLOCKSOURCE_H */
diff --git a/ANDROID_3.4.5/include/linux/cm4000_cs.h b/ANDROID_3.4.5/include/linux/cm4000_cs.h
deleted file mode 100644
index 3c4aac40..00000000
--- a/ANDROID_3.4.5/include/linux/cm4000_cs.h
+++ /dev/null
@@ -1,68 +0,0 @@
-#ifndef	_CM4000_H_
-#define	_CM4000_H_
-
-#include <linux/types.h>
-
-#define	MAX_ATR			33
-
-#define	CM4000_MAX_DEV		4
-
-/* those two structures are passed via ioctl() from/to userspace.  They are
- * used by existing userspace programs, so I kepth the awkward "bIFSD" naming
- * not to break compilation of userspace apps. -HW */
-
-typedef struct atreq {
-	__s32 atr_len;
-	unsigned char atr[64];
-	__s32 power_act;
-	unsigned char bIFSD;
-	unsigned char bIFSC;
-} atreq_t;
-
-
-/* what is particularly stupid in the original driver is the arch-dependent
- * member sizes. This leads to CONFIG_COMPAT breakage, since 32bit userspace
- * will lay out the structure members differently than the 64bit kernel.
- *
- * I've changed "ptsreq.protocol" from "unsigned long" to "__u32".
- * On 32bit this will make no difference.  With 64bit kernels, it will make
- * 32bit apps work, too.
- */
-
-typedef struct ptsreq {
-	__u32 protocol; /*T=0: 2^0, T=1:  2^1*/
- 	unsigned char flags;
- 	unsigned char pts1;
- 	unsigned char pts2;
-	unsigned char pts3;
-} ptsreq_t;
-
-#define	CM_IOC_MAGIC		'c'
-#define	CM_IOC_MAXNR	        255
-
-#define	CM_IOCGSTATUS		_IOR (CM_IOC_MAGIC, 0, unsigned char *)
-#define	CM_IOCGATR		_IOWR(CM_IOC_MAGIC, 1, atreq_t *)
-#define	CM_IOCSPTS		_IOW (CM_IOC_MAGIC, 2, ptsreq_t *)
-#define	CM_IOCSRDR		_IO  (CM_IOC_MAGIC, 3)
-#define CM_IOCARDOFF            _IO  (CM_IOC_MAGIC, 4)
-
-#define CM_IOSDBGLVL            _IOW(CM_IOC_MAGIC, 250, int*)
-
-/* card and device states */
-#define	CM_CARD_INSERTED		0x01
-#define	CM_CARD_POWERED			0x02
-#define	CM_ATR_PRESENT			0x04
-#define	CM_ATR_VALID	 		0x08
-#define	CM_STATE_VALID			0x0f
-/* extra info only from CM4000 */
-#define	CM_NO_READER			0x10
-#define	CM_BAD_CARD			0x20
-
-
-#ifdef __KERNEL__
-
-#define	DEVICE_NAME		"cmm"
-#define	MODULE_NAME		"cm4000_cs"
-
-#endif	/* __KERNEL__ */
-#endif	/* _CM4000_H_ */
diff --git a/ANDROID_3.4.5/include/linux/cn_proc.h b/ANDROID_3.4.5/include/linux/cn_proc.h
deleted file mode 100644
index d03612b1..00000000
--- a/ANDROID_3.4.5/include/linux/cn_proc.h
+++ /dev/null
@@ -1,155 +0,0 @@
-/*
- * cn_proc.h - process events connector
- *
- * Copyright (C) Matt Helsley, IBM Corp. 2005
- * Based on cn_fork.h by Nguyen Anh Quynh and Guillaume Thouvenin
- * Copyright (C) 2005 Nguyen Anh Quynh <aquynh@gmail.com>
- * Copyright (C) 2005 Guillaume Thouvenin <guillaume.thouvenin@bull.net>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of version 2.1 of the GNU Lesser General Public License
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it would be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-#ifndef CN_PROC_H
-#define CN_PROC_H
-
-#include <linux/types.h>
-
-/*
- * Userspace sends this enum to register with the kernel that it is listening
- * for events on the connector.
- */
-enum proc_cn_mcast_op {
-	PROC_CN_MCAST_LISTEN = 1,
-	PROC_CN_MCAST_IGNORE = 2
-};
-
-/*
- * From the user's point of view, the process
- * ID is the thread group ID and thread ID is the internal
- * kernel "pid". So, fields are assigned as follow:
- *
- *  In user space     -  In  kernel space
- *
- * parent process ID  =  parent->tgid
- * parent thread  ID  =  parent->pid
- * child  process ID  =  child->tgid
- * child  thread  ID  =  child->pid
- */
-
-struct proc_event {
-	enum what {
-		/* Use successive bits so the enums can be used to record
-		 * sets of events as well
-		 */
-		PROC_EVENT_NONE = 0x00000000,
-		PROC_EVENT_FORK = 0x00000001,
-		PROC_EVENT_EXEC = 0x00000002,
-		PROC_EVENT_UID  = 0x00000004,
-		PROC_EVENT_GID  = 0x00000040,
-		PROC_EVENT_SID  = 0x00000080,
-		PROC_EVENT_PTRACE = 0x00000100,
-		PROC_EVENT_COMM = 0x00000200,
-		/* "next" should be 0x00000400 */
-		/* "last" is the last process event: exit */
-		PROC_EVENT_EXIT = 0x80000000
-	} what;
-	__u32 cpu;
-	__u64 __attribute__((aligned(8))) timestamp_ns;
-		/* Number of nano seconds since system boot */
-	union { /* must be last field of proc_event struct */
-		struct {
-			__u32 err;
-		} ack;
-
-		struct fork_proc_event {
-			__kernel_pid_t parent_pid;
-			__kernel_pid_t parent_tgid;
-			__kernel_pid_t child_pid;
-			__kernel_pid_t child_tgid;
-		} fork;
-
-		struct exec_proc_event {
-			__kernel_pid_t process_pid;
-			__kernel_pid_t process_tgid;
-		} exec;
-
-		struct id_proc_event {
-			__kernel_pid_t process_pid;
-			__kernel_pid_t process_tgid;
-			union {
-				__u32 ruid; /* task uid */
-				__u32 rgid; /* task gid */
-			} r;
-			union {
-				__u32 euid;
-				__u32 egid;
-			} e;
-		} id;
-
-		struct sid_proc_event {
-			__kernel_pid_t process_pid;
-			__kernel_pid_t process_tgid;
-		} sid;
-
-		struct ptrace_proc_event {
-			__kernel_pid_t process_pid;
-			__kernel_pid_t process_tgid;
-			__kernel_pid_t tracer_pid;
-			__kernel_pid_t tracer_tgid;
-		} ptrace;
-
-		struct comm_proc_event {
-			__kernel_pid_t process_pid;
-			__kernel_pid_t process_tgid;
-			char           comm[16];
-		} comm;
-
-		struct exit_proc_event {
-			__kernel_pid_t process_pid;
-			__kernel_pid_t process_tgid;
-			__u32 exit_code, exit_signal;
-		} exit;
-	} event_data;
-};
-
-#ifdef __KERNEL__
-#ifdef CONFIG_PROC_EVENTS
-void proc_fork_connector(struct task_struct *task);
-void proc_exec_connector(struct task_struct *task);
-void proc_id_connector(struct task_struct *task, int which_id);
-void proc_sid_connector(struct task_struct *task);
-void proc_ptrace_connector(struct task_struct *task, int which_id);
-void proc_comm_connector(struct task_struct *task);
-void proc_exit_connector(struct task_struct *task);
-#else
-static inline void proc_fork_connector(struct task_struct *task)
-{}
-
-static inline void proc_exec_connector(struct task_struct *task)
-{}
-
-static inline void proc_id_connector(struct task_struct *task,
-				     int which_id)
-{}
-
-static inline void proc_sid_connector(struct task_struct *task)
-{}
-
-static inline void proc_comm_connector(struct task_struct *task)
-{}
-
-static inline void proc_ptrace_connector(struct task_struct *task,
-					 int ptrace_id)
-{}
-
-static inline void proc_exit_connector(struct task_struct *task)
-{}
-#endif	/* CONFIG_PROC_EVENTS */
-#endif	/* __KERNEL__ */
-#endif	/* CN_PROC_H */
diff --git a/ANDROID_3.4.5/include/linux/cnt32_to_63.h b/ANDROID_3.4.5/include/linux/cnt32_to_63.h
deleted file mode 100644
index aa629bce..00000000
--- a/ANDROID_3.4.5/include/linux/cnt32_to_63.h
+++ /dev/null
@@ -1,107 +0,0 @@
-/*
- *  Extend a 32-bit counter to 63 bits
- *
- *  Author:	Nicolas Pitre
- *  Created:	December 3, 2006
- *  Copyright:	MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.
- */
-
-#ifndef __LINUX_CNT32_TO_63_H__
-#define __LINUX_CNT32_TO_63_H__
-
-#include <linux/compiler.h>
-#include <linux/types.h>
-#include <asm/byteorder.h>
-
-/* this is used only to give gcc a clue about good code generation */
-union cnt32_to_63 {
-	struct {
-#if defined(__LITTLE_ENDIAN)
-		u32 lo, hi;
-#elif defined(__BIG_ENDIAN)
-		u32 hi, lo;
-#endif
-	};
-	u64 val;
-};
-
-
-/**
- * cnt32_to_63 - Expand a 32-bit counter to a 63-bit counter
- * @cnt_lo: The low part of the counter
- *
- * Many hardware clock counters are only 32 bits wide and therefore have
- * a relatively short period making wrap-arounds rather frequent.  This
- * is a problem when implementing sched_clock() for example, where a 64-bit
- * non-wrapping monotonic value is expected to be returned.
- *
- * To overcome that limitation, let's extend a 32-bit counter to 63 bits
- * in a completely lock free fashion. Bits 0 to 31 of the clock are provided
- * by the hardware while bits 32 to 62 are stored in memory.  The top bit in
- * memory is used to synchronize with the hardware clock half-period.  When
- * the top bit of both counters (hardware and in memory) differ then the
- * memory is updated with a new value, incrementing it when the hardware
- * counter wraps around.
- *
- * Because a word store in memory is atomic then the incremented value will
- * always be in synch with the top bit indicating to any potential concurrent
- * reader if the value in memory is up to date or not with regards to the
- * needed increment.  And any race in updating the value in memory is harmless
- * as the same value would simply be stored more than once.
- *
- * The restrictions for the algorithm to work properly are:
- *
- * 1) this code must be called at least once per each half period of the
- *    32-bit counter;
- *
- * 2) this code must not be preempted for a duration longer than the
- *    32-bit counter half period minus the longest period between two
- *    calls to this code;
- *
- * Those requirements ensure proper update to the state bit in memory.
- * This is usually not a problem in practice, but if it is then a kernel
- * timer should be scheduled to manage for this code to be executed often
- * enough.
- *
- * And finally:
- *
- * 3) the cnt_lo argument must be seen as a globally incrementing value,
- *    meaning that it should be a direct reference to the counter data which
- *    can be evaluated according to a specific ordering within the macro,
- *    and not the result of a previous evaluation stored in a variable.
- *
- * For example, this is wrong:
- *
- *	u32 partial = get_hw_count();
- *	u64 full = cnt32_to_63(partial);
- *	return full;
- *
- * This is fine:
- *
- *	u64 full = cnt32_to_63(get_hw_count());
- *	return full;
- *
- * Note that the top bit (bit 63) in the returned value should be considered
- * as garbage.  It is not cleared here because callers are likely to use a
- * multiplier on the returned value which can get rid of the top bit
- * implicitly by making the multiplier even, therefore saving on a runtime
- * clear-bit instruction. Otherwise caller must remember to clear the top
- * bit explicitly.
- */
-#define cnt32_to_63(cnt_lo) \
-({ \
-	static u32 __m_cnt_hi; \
-	union cnt32_to_63 __x; \
-	__x.hi = __m_cnt_hi; \
- 	smp_rmb(); \
-	__x.lo = (cnt_lo); \
-	if (unlikely((s32)(__x.hi ^ __x.lo) < 0)) \
-		__m_cnt_hi = __x.hi = (__x.hi ^ 0x80000000) + (__x.hi >> 31); \
-	__x.val; \
-})
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/coda.h b/ANDROID_3.4.5/include/linux/coda.h
deleted file mode 100644
index 96c87693..00000000
--- a/ANDROID_3.4.5/include/linux/coda.h
+++ /dev/null
@@ -1,744 +0,0 @@
-/* 
-   You may distribute this file under either of the two licenses that
-   follow at your discretion.
-*/
-
-/* BLURB lgpl
-
-                           Coda File System
-                              Release 5
-
-          Copyright (c) 1987-1999 Carnegie Mellon University
-                  Additional copyrights listed below
-
-This code is distributed "AS IS" without warranty of any kind under
-the terms of the GNU Library General Public Licence Version 2, as
-shown in the file LICENSE, or under the license shown below. The
-technical and financial contributors to Coda are listed in the file
-CREDITS.
-
-                        Additional copyrights 
-*/
-
-/*
-
-            Coda: an Experimental Distributed File System
-                             Release 4.0
-
-          Copyright (c) 1987-1999 Carnegie Mellon University
-                         All Rights Reserved
-
-Permission  to  use, copy, modify and distribute this software and its
-documentation is hereby granted,  provided  that  both  the  copyright
-notice  and  this  permission  notice  appear  in  all  copies  of the
-software, derivative works or  modified  versions,  and  any  portions
-thereof, and that both notices appear in supporting documentation, and
-that credit is given to Carnegie Mellon University  in  all  documents
-and publicity pertaining to direct or indirect use of this code or its
-derivatives.
-
-CODA IS AN EXPERIMENTAL SOFTWARE SYSTEM AND IS  KNOWN  TO  HAVE  BUGS,
-SOME  OF  WHICH MAY HAVE SERIOUS CONSEQUENCES.  CARNEGIE MELLON ALLOWS
-FREE USE OF THIS SOFTWARE IN ITS "AS IS" CONDITION.   CARNEGIE  MELLON
-DISCLAIMS  ANY  LIABILITY  OF  ANY  KIND  FOR  ANY  DAMAGES WHATSOEVER
-RESULTING DIRECTLY OR INDIRECTLY FROM THE USE OF THIS SOFTWARE  OR  OF
-ANY DERIVATIVE WORK.
-
-Carnegie  Mellon  encourages  users  of  this  software  to return any
-improvements or extensions that  they  make,  and  to  grant  Carnegie
-Mellon the rights to redistribute these changes without encumbrance.
-*/
-
-/*
- *
- * Based on cfs.h from Mach, but revamped for increased simplicity.
- * Linux modifications by 
- * Peter Braam, Aug 1996
- */
-
-#ifndef _CODA_HEADER_
-#define _CODA_HEADER_
-
-
-/* Catch new _KERNEL defn for NetBSD and DJGPP/__CYGWIN32__ */
-#if defined(__NetBSD__) || \
-  ((defined(DJGPP) || defined(__CYGWIN32__)) && !defined(KERNEL))
-#include <sys/types.h>
-#endif 
-
-#ifndef CODA_MAXSYMLINKS
-#define CODA_MAXSYMLINKS 10
-#endif
-
-#if defined(DJGPP) || defined(__CYGWIN32__)
-#ifdef KERNEL
-typedef unsigned long u_long;
-typedef unsigned int u_int;
-typedef unsigned short u_short;
-typedef u_long ino_t;
-typedef u_long dev_t;
-typedef void * caddr_t;
-#ifdef DOS
-typedef unsigned __int64 u_quad_t;
-#else 
-typedef unsigned long long u_quad_t;
-#endif
-
-#define inline
-
-struct timespec {
-        long       ts_sec;
-        long       ts_nsec;
-};
-#else  /* DJGPP but not KERNEL */
-#include <sys/time.h>
-typedef unsigned long long u_quad_t;
-#endif /* !KERNEL */
-#endif /* !DJGPP */
-
-
-#if defined(__linux__)
-#include <linux/time.h>
-#define cdev_t u_quad_t
-#ifndef __KERNEL__
-#if !defined(_UQUAD_T_) && (!defined(__GLIBC__) || __GLIBC__ < 2)
-#define _UQUAD_T_ 1
-typedef unsigned long long u_quad_t;
-#endif
-#else /*__KERNEL__ */
-typedef unsigned long long u_quad_t;
-#endif /* __KERNEL__ */
-#else
-#define cdev_t dev_t
-#endif
-
-#ifdef __CYGWIN32__
-struct timespec {
-        time_t  tv_sec;         /* seconds */
-        long    tv_nsec;        /* nanoseconds */
-};
-#endif
-
-#ifndef __BIT_TYPES_DEFINED__
-#define __BIT_TYPES_DEFINED__
-typedef signed char	      int8_t;
-typedef unsigned char	    u_int8_t;
-typedef short		     int16_t;
-typedef unsigned short	   u_int16_t;
-typedef int		     int32_t;
-typedef unsigned int	   u_int32_t;
-#endif
-
-
-/*
- * Cfs constants
- */
-#define CODA_MAXNAMLEN   255
-#define CODA_MAXPATHLEN  1024
-#define CODA_MAXSYMLINK  10
-
-/* these are Coda's version of O_RDONLY etc combinations
- * to deal with VFS open modes
- */
-#define	C_O_READ	0x001
-#define	C_O_WRITE       0x002
-#define C_O_TRUNC       0x010
-#define C_O_EXCL	0x100
-#define C_O_CREAT	0x200
-
-/* these are to find mode bits in Venus */ 
-#define C_M_READ  00400
-#define C_M_WRITE 00200
-
-/* for access Venus will use */
-#define C_A_C_OK    8               /* Test for writing upon create.  */
-#define C_A_R_OK    4               /* Test for read permission.  */
-#define C_A_W_OK    2               /* Test for write permission.  */
-#define C_A_X_OK    1               /* Test for execute permission.  */
-#define C_A_F_OK    0               /* Test for existence.  */
-
-
-
-#ifndef _VENUS_DIRENT_T_
-#define _VENUS_DIRENT_T_ 1
-struct venus_dirent {
-        u_int32_t d_fileno;		/* file number of entry */
-        u_int16_t d_reclen;		/* length of this record */
-        u_int8_t  d_type;			/* file type, see below */
-        u_int8_t  d_namlen;		/* length of string in d_name */
-        char	  d_name[CODA_MAXNAMLEN + 1];/* name must be no longer than this */
-};
-#undef DIRSIZ
-#define DIRSIZ(dp)      ((sizeof (struct venus_dirent) - (CODA_MAXNAMLEN+1)) + \
-                         (((dp)->d_namlen+1 + 3) &~ 3))
-
-/*
- * File types
- */
-#define	CDT_UNKNOWN	 0
-#define	CDT_FIFO	 1
-#define	CDT_CHR		 2
-#define	CDT_DIR		 4
-#define	CDT_BLK		 6
-#define	CDT_REG		 8
-#define	CDT_LNK		10
-#define	CDT_SOCK	12
-#define	CDT_WHT		14
-
-/*
- * Convert between stat structure types and directory types.
- */
-#define	IFTOCDT(mode)	(((mode) & 0170000) >> 12)
-#define	CDTTOIF(dirtype)	((dirtype) << 12)
-
-#endif
-
-#ifndef _VUID_T_
-#define _VUID_T_
-typedef u_int32_t vuid_t;
-typedef u_int32_t vgid_t;
-#endif /*_VUID_T_ */
-
-struct CodaFid {
-	u_int32_t opaque[4];
-};
-
-#define coda_f2i(fid)\
-	(fid ? (fid->opaque[3] ^ (fid->opaque[2]<<10) ^ (fid->opaque[1]<<20) ^ fid->opaque[0]) : 0)
-
-#ifndef _VENUS_VATTR_T_
-#define _VENUS_VATTR_T_
-/*
- * Vnode types.  VNON means no type.
- */
-enum coda_vtype	{ C_VNON, C_VREG, C_VDIR, C_VBLK, C_VCHR, C_VLNK, C_VSOCK, C_VFIFO, C_VBAD };
-
-struct coda_vattr {
-	long     	va_type;	/* vnode type (for create) */
-	u_short		va_mode;	/* files access mode and type */
-	short		va_nlink;	/* number of references to file */
-	vuid_t		va_uid;		/* owner user id */
-	vgid_t		va_gid;		/* owner group id */
-	long		va_fileid;	/* file id */
-	u_quad_t	va_size;	/* file size in bytes */
-	long		va_blocksize;	/* blocksize preferred for i/o */
-	struct timespec	va_atime;	/* time of last access */
-	struct timespec	va_mtime;	/* time of last modification */
-	struct timespec	va_ctime;	/* time file changed */
-	u_long		va_gen;		/* generation number of file */
-	u_long		va_flags;	/* flags defined for file */
-	cdev_t	        va_rdev;	/* device special file represents */
-	u_quad_t	va_bytes;	/* bytes of disk space held by file */
-	u_quad_t	va_filerev;	/* file modification number */
-};
-
-#endif 
-
-/* structure used by CODA_STATFS for getting cache information from venus */
-struct coda_statfs {
-    int32_t f_blocks;
-    int32_t f_bfree;
-    int32_t f_bavail;
-    int32_t f_files;
-    int32_t f_ffree;
-};
-
-/*
- * Kernel <--> Venus communications.
- */
-
-#define CODA_ROOT	2
-#define CODA_OPEN_BY_FD	3
-#define CODA_OPEN	4
-#define CODA_CLOSE	5
-#define CODA_IOCTL	6
-#define CODA_GETATTR	7
-#define CODA_SETATTR	8
-#define CODA_ACCESS	9
-#define CODA_LOOKUP	10
-#define CODA_CREATE	11
-#define CODA_REMOVE	12
-#define CODA_LINK	13
-#define CODA_RENAME	14
-#define CODA_MKDIR	15
-#define CODA_RMDIR	16
-#define CODA_SYMLINK	18
-#define CODA_READLINK	19
-#define CODA_FSYNC	20
-#define CODA_VGET	22
-#define CODA_SIGNAL	23
-#define CODA_REPLACE	 24 /* DOWNCALL */
-#define CODA_FLUSH       25 /* DOWNCALL */
-#define CODA_PURGEUSER   26 /* DOWNCALL */
-#define CODA_ZAPFILE     27 /* DOWNCALL */
-#define CODA_ZAPDIR      28 /* DOWNCALL */
-#define CODA_PURGEFID    30 /* DOWNCALL */
-#define CODA_OPEN_BY_PATH 31
-#define CODA_RESOLVE     32
-#define CODA_REINTEGRATE 33
-#define CODA_STATFS	 34
-#define CODA_STORE	 35
-#define CODA_RELEASE	 36
-#define CODA_NCALLS 37
-
-#define DOWNCALL(opcode) (opcode >= CODA_REPLACE && opcode <= CODA_PURGEFID)
-
-#define VC_MAXDATASIZE	    8192
-#define VC_MAXMSGSIZE      sizeof(union inputArgs)+sizeof(union outputArgs) +\
-                            VC_MAXDATASIZE  
-
-#define CIOC_KERNEL_VERSION _IOWR('c', 10, size_t)
-
-#define CODA_KERNEL_VERSION 3 /* 128-bit file identifiers */
-
-/*
- *        Venus <-> Coda  RPC arguments
- */
-struct coda_in_hdr {
-    u_int32_t opcode;
-    u_int32_t unique;	    /* Keep multiple outstanding msgs distinct */
-    pid_t pid;
-    pid_t pgid;
-    vuid_t uid;
-};
-
-/* Really important that opcode and unique are 1st two fields! */
-struct coda_out_hdr {
-    u_int32_t opcode;
-    u_int32_t unique;	
-    u_int32_t result;
-};
-
-/* coda_root: NO_IN */
-struct coda_root_out {
-    struct coda_out_hdr oh;
-    struct CodaFid VFid;
-};
-
-struct coda_root_in {
-    struct coda_in_hdr in;
-};
-
-/* coda_open: */
-struct coda_open_in {
-    struct coda_in_hdr ih;
-    struct CodaFid VFid;
-    int	flags;
-};
-
-struct coda_open_out {
-    struct coda_out_hdr oh;
-    cdev_t	dev;
-    ino_t	inode;
-};
-
-
-/* coda_store: */
-struct coda_store_in {
-    struct coda_in_hdr ih;
-    struct CodaFid VFid;
-    int	flags;
-};
-
-struct coda_store_out {
-    struct coda_out_hdr out;
-};
-
-/* coda_release: */
-struct coda_release_in {
-    struct coda_in_hdr ih;
-    struct CodaFid VFid;
-    int	flags;
-};
-
-struct coda_release_out {
-    struct coda_out_hdr out;
-};
-
-/* coda_close: */
-struct coda_close_in {
-    struct coda_in_hdr ih;
-    struct CodaFid VFid;
-    int	flags;
-};
-
-struct coda_close_out {
-    struct coda_out_hdr out;
-};
-
-/* coda_ioctl: */
-struct coda_ioctl_in {
-    struct coda_in_hdr ih;
-    struct CodaFid VFid;
-    int	cmd;
-    int	len;
-    int	rwflag;
-    char *data;			/* Place holder for data. */
-};
-
-struct coda_ioctl_out {
-    struct coda_out_hdr oh;
-    int	len;
-    caddr_t	data;		/* Place holder for data. */
-};
-
-
-/* coda_getattr: */
-struct coda_getattr_in {
-    struct coda_in_hdr ih;
-    struct CodaFid VFid;
-};
-
-struct coda_getattr_out {
-    struct coda_out_hdr oh;
-    struct coda_vattr attr;
-};
-
-
-/* coda_setattr: NO_OUT */
-struct coda_setattr_in {
-    struct coda_in_hdr ih;
-    struct CodaFid VFid;
-    struct coda_vattr attr;
-};
-
-struct coda_setattr_out {
-    struct coda_out_hdr out;
-};
-
-/* coda_access: NO_OUT */
-struct coda_access_in {
-    struct coda_in_hdr ih;
-    struct CodaFid VFid;
-    int	flags;
-};
-
-struct coda_access_out {
-    struct coda_out_hdr out;
-};
-
-
-/* lookup flags */
-#define CLU_CASE_SENSITIVE     0x01
-#define CLU_CASE_INSENSITIVE   0x02
-
-/* coda_lookup: */
-struct  coda_lookup_in {
-    struct coda_in_hdr ih;
-    struct CodaFid VFid;
-    int         name;		/* Place holder for data. */
-    int         flags;	
-};
-
-struct coda_lookup_out {
-    struct coda_out_hdr oh;
-    struct CodaFid VFid;
-    int	vtype;
-};
-
-
-/* coda_create: */
-struct coda_create_in {
-    struct coda_in_hdr ih;
-    struct CodaFid VFid;
-    struct coda_vattr attr;
-    int excl;
-    int mode;
-    int 	name;		/* Place holder for data. */
-};
-
-struct coda_create_out {
-    struct coda_out_hdr oh;
-    struct CodaFid VFid;
-    struct coda_vattr attr;
-};
-
-
-/* coda_remove: NO_OUT */
-struct coda_remove_in {
-    struct coda_in_hdr ih;
-    struct CodaFid VFid;
-    int name;		/* Place holder for data. */
-};
-
-struct coda_remove_out {
-    struct coda_out_hdr out;
-};
-
-/* coda_link: NO_OUT */
-struct coda_link_in {
-    struct coda_in_hdr ih;
-    struct CodaFid sourceFid;	/* cnode to link *to* */
-    struct CodaFid destFid;	/* Directory in which to place link */
-    int tname;		/* Place holder for data. */
-};
-
-struct coda_link_out {
-    struct coda_out_hdr out;
-};
-
-
-/* coda_rename: NO_OUT */
-struct coda_rename_in {
-    struct coda_in_hdr ih;
-    struct CodaFid sourceFid;
-    int 	srcname;
-    struct CodaFid destFid;
-    int 	destname;
-};
-
-struct coda_rename_out {
-    struct coda_out_hdr out;
-};
-
-/* coda_mkdir: */
-struct coda_mkdir_in {
-    struct coda_in_hdr ih;
-    struct CodaFid VFid;
-    struct coda_vattr attr;
-    int	   name;		/* Place holder for data. */
-};
-
-struct coda_mkdir_out {
-    struct coda_out_hdr oh;
-    struct CodaFid VFid;
-    struct coda_vattr attr;
-};
-
-
-/* coda_rmdir: NO_OUT */
-struct coda_rmdir_in {
-    struct coda_in_hdr ih;
-    struct CodaFid VFid;
-    int name;		/* Place holder for data. */
-};
-
-struct coda_rmdir_out {
-    struct coda_out_hdr out;
-};
-
-/* coda_symlink: NO_OUT */
-struct coda_symlink_in {
-    struct coda_in_hdr ih;
-    struct CodaFid VFid;	/* Directory to put symlink in */
-    int srcname;
-    struct coda_vattr attr;
-    int tname;
-};
-
-struct coda_symlink_out {
-    struct coda_out_hdr out;
-};
-
-/* coda_readlink: */
-struct coda_readlink_in {
-    struct coda_in_hdr ih;
-    struct CodaFid VFid;
-};
-
-struct coda_readlink_out {
-    struct coda_out_hdr oh;
-    int	count;
-    caddr_t	data;		/* Place holder for data. */
-};
-
-
-/* coda_fsync: NO_OUT */
-struct coda_fsync_in {
-    struct coda_in_hdr ih;
-    struct CodaFid VFid;
-};
-
-struct coda_fsync_out {
-    struct coda_out_hdr out;
-};
-
-/* coda_vget: */
-struct coda_vget_in {
-    struct coda_in_hdr ih;
-    struct CodaFid VFid;
-};
-
-struct coda_vget_out {
-    struct coda_out_hdr oh;
-    struct CodaFid VFid;
-    int	vtype;
-};
-
-
-/* CODA_SIGNAL is out-of-band, doesn't need data. */
-/* CODA_INVALIDATE is a venus->kernel call */
-/* CODA_FLUSH is a venus->kernel call */
-
-/* coda_purgeuser: */
-/* CODA_PURGEUSER is a venus->kernel call */
-struct coda_purgeuser_out {
-    struct coda_out_hdr oh;
-    vuid_t uid;
-};
-
-/* coda_zapfile: */
-/* CODA_ZAPFILE is a venus->kernel call */
-struct coda_zapfile_out {  
-    struct coda_out_hdr oh;
-    struct CodaFid CodaFid;
-};
-
-/* coda_zapdir: */
-/* CODA_ZAPDIR is a venus->kernel call */	
-struct coda_zapdir_out {	  
-    struct coda_out_hdr oh;
-    struct CodaFid CodaFid;
-};
-
-/* coda_purgefid: */
-/* CODA_PURGEFID is a venus->kernel call */	
-struct coda_purgefid_out { 
-    struct coda_out_hdr oh;
-    struct CodaFid CodaFid;
-};
-
-/* coda_replace: */
-/* CODA_REPLACE is a venus->kernel call */	
-struct coda_replace_out { /* coda_replace is a venus->kernel call */
-    struct coda_out_hdr oh;
-    struct CodaFid NewFid;
-    struct CodaFid OldFid;
-};
-
-/* coda_open_by_fd: */
-struct coda_open_by_fd_in {
-    struct coda_in_hdr ih;
-    struct CodaFid VFid;
-    int        flags;
-};
-
-struct coda_open_by_fd_out {
-    struct coda_out_hdr oh;
-    int fd;
-
-#ifdef __KERNEL__
-    struct file *fh; /* not passed from userspace but used in-kernel only */
-#endif
-};
-
-/* coda_open_by_path: */
-struct coda_open_by_path_in {
-    struct coda_in_hdr ih;
-    struct CodaFid VFid;
-    int	flags;
-};
-
-struct coda_open_by_path_out {
-    struct coda_out_hdr oh;
-	int path;
-};
-
-/* coda_statfs: NO_IN */
-struct coda_statfs_in {
-    struct coda_in_hdr in;
-};
-
-struct coda_statfs_out {
-    struct coda_out_hdr oh;
-    struct coda_statfs stat;
-};
-
-/* 
- * Occasionally, we don't cache the fid returned by CODA_LOOKUP. 
- * For instance, if the fid is inconsistent. 
- * This case is handled by setting the top bit of the type result parameter.
- */
-#define CODA_NOCACHE          0x80000000
-
-union inputArgs {
-    struct coda_in_hdr ih;		/* NB: every struct below begins with an ih */
-    struct coda_open_in coda_open;
-    struct coda_store_in coda_store;
-    struct coda_release_in coda_release;
-    struct coda_close_in coda_close;
-    struct coda_ioctl_in coda_ioctl;
-    struct coda_getattr_in coda_getattr;
-    struct coda_setattr_in coda_setattr;
-    struct coda_access_in coda_access;
-    struct coda_lookup_in coda_lookup;
-    struct coda_create_in coda_create;
-    struct coda_remove_in coda_remove;
-    struct coda_link_in coda_link;
-    struct coda_rename_in coda_rename;
-    struct coda_mkdir_in coda_mkdir;
-    struct coda_rmdir_in coda_rmdir;
-    struct coda_symlink_in coda_symlink;
-    struct coda_readlink_in coda_readlink;
-    struct coda_fsync_in coda_fsync;
-    struct coda_vget_in coda_vget;
-    struct coda_open_by_fd_in coda_open_by_fd;
-    struct coda_open_by_path_in coda_open_by_path;
-    struct coda_statfs_in coda_statfs;
-};
-
-union outputArgs {
-    struct coda_out_hdr oh;		/* NB: every struct below begins with an oh */
-    struct coda_root_out coda_root;
-    struct coda_open_out coda_open;
-    struct coda_ioctl_out coda_ioctl;
-    struct coda_getattr_out coda_getattr;
-    struct coda_lookup_out coda_lookup;
-    struct coda_create_out coda_create;
-    struct coda_mkdir_out coda_mkdir;
-    struct coda_readlink_out coda_readlink;
-    struct coda_vget_out coda_vget;
-    struct coda_purgeuser_out coda_purgeuser;
-    struct coda_zapfile_out coda_zapfile;
-    struct coda_zapdir_out coda_zapdir;
-    struct coda_purgefid_out coda_purgefid;
-    struct coda_replace_out coda_replace;
-    struct coda_open_by_fd_out coda_open_by_fd;
-    struct coda_open_by_path_out coda_open_by_path;
-    struct coda_statfs_out coda_statfs;
-};    
-
-union coda_downcalls {
-    /* CODA_INVALIDATE is a venus->kernel call */
-    /* CODA_FLUSH is a venus->kernel call */
-    struct coda_purgeuser_out purgeuser;
-    struct coda_zapfile_out zapfile;
-    struct coda_zapdir_out zapdir;
-    struct coda_purgefid_out purgefid;
-    struct coda_replace_out replace;
-};
-
-
-/*
- * Used for identifying usage of "Control" and pioctls
- */
-
-#define PIOCPARM_MASK 0x0000ffff
-struct ViceIoctl {
-        void __user *in;        /* Data to be transferred in */
-        void __user *out;       /* Data to be transferred out */
-        u_short in_size;        /* Size of input buffer <= 2K */
-        u_short out_size;       /* Maximum size of output buffer, <= 2K */
-};
-
-struct PioctlData {
-        const char __user *path;
-        int follow;
-        struct ViceIoctl vi;
-};
-
-#define CODA_CONTROL		".CONTROL"
-#define CODA_CONTROLLEN		8
-#define CTL_INO			-1
-
-/* Data passed to mount */
-
-#define CODA_MOUNT_VERSION 1
-
-struct coda_mount_data {
-	int		version;
-	int		fd;       /* Opened device */
-};
-
-#endif 
-
diff --git a/ANDROID_3.4.5/include/linux/coda_psdev.h b/ANDROID_3.4.5/include/linux/coda_psdev.h
deleted file mode 100644
index 72f2d2f0..00000000
--- a/ANDROID_3.4.5/include/linux/coda_psdev.h
+++ /dev/null
@@ -1,96 +0,0 @@
-#ifndef __CODA_PSDEV_H
-#define __CODA_PSDEV_H
-
-#include <linux/magic.h>
-
-#define CODA_PSDEV_MAJOR 67
-#define MAX_CODADEVS  5	   /* how many do we allow */
-
-#ifdef __KERNEL__
-#include <linux/backing-dev.h>
-#include <linux/mutex.h>
-
-struct kstatfs;
-
-/* communication pending/processing queues */
-struct venus_comm {
-	u_long		    vc_seq;
-	wait_queue_head_t   vc_waitq; /* Venus wait queue */
-	struct list_head    vc_pending;
-	struct list_head    vc_processing;
-	int                 vc_inuse;
-	struct super_block *vc_sb;
-	struct backing_dev_info bdi;
-	struct mutex	    vc_mutex;
-};
-
-
-static inline struct venus_comm *coda_vcp(struct super_block *sb)
-{
-	return (struct venus_comm *)((sb)->s_fs_info);
-}
-
-/* upcalls */
-int venus_rootfid(struct super_block *sb, struct CodaFid *fidp);
-int venus_getattr(struct super_block *sb, struct CodaFid *fid,
-		  struct coda_vattr *attr);
-int venus_setattr(struct super_block *, struct CodaFid *, struct coda_vattr *);
-int venus_lookup(struct super_block *sb, struct CodaFid *fid, 
-		 const char *name, int length, int *type, 
-		 struct CodaFid *resfid);
-int venus_close(struct super_block *sb, struct CodaFid *fid, int flags,
-		vuid_t uid);
-int venus_open(struct super_block *sb, struct CodaFid *fid, int flags,
-	       struct file **f);
-int venus_mkdir(struct super_block *sb, struct CodaFid *dirfid, 
-		const char *name, int length, 
-		struct CodaFid *newfid, struct coda_vattr *attrs);
-int venus_create(struct super_block *sb, struct CodaFid *dirfid, 
-		 const char *name, int length, int excl, int mode,
-		 struct CodaFid *newfid, struct coda_vattr *attrs) ;
-int venus_rmdir(struct super_block *sb, struct CodaFid *dirfid, 
-		const char *name, int length);
-int venus_remove(struct super_block *sb, struct CodaFid *dirfid, 
-		 const char *name, int length);
-int venus_readlink(struct super_block *sb, struct CodaFid *fid, 
-		   char *buffer, int *length);
-int venus_rename(struct super_block *, struct CodaFid *new_fid, 
-		 struct CodaFid *old_fid, size_t old_length, 
-		 size_t new_length, const char *old_name, 
-		 const char *new_name);
-int venus_link(struct super_block *sb, struct CodaFid *fid, 
-		  struct CodaFid *dirfid, const char *name, int len );
-int venus_symlink(struct super_block *sb, struct CodaFid *fid,
-		  const char *name, int len, const char *symname, int symlen);
-int venus_access(struct super_block *sb, struct CodaFid *fid, int mask);
-int venus_pioctl(struct super_block *sb, struct CodaFid *fid,
-		 unsigned int cmd, struct PioctlData *data);
-int coda_downcall(struct venus_comm *vcp, int opcode, union outputArgs *out);
-int venus_fsync(struct super_block *sb, struct CodaFid *fid);
-int venus_statfs(struct dentry *dentry, struct kstatfs *sfs);
-
-/*
- * Statistics
- */
-
-extern struct venus_comm coda_comms[];
-#endif /* __KERNEL__ */
-
-/* messages between coda filesystem in kernel and Venus */
-struct upc_req {
-	struct list_head    uc_chain;
-	caddr_t	            uc_data;
-	u_short	            uc_flags;
-	u_short             uc_inSize;  /* Size is at most 5000 bytes */
-	u_short	            uc_outSize;
-	u_short	            uc_opcode;  /* copied from data to save lookup */
-	int		    uc_unique;
-	wait_queue_head_t   uc_sleep;   /* process' wait queue */
-};
-
-#define CODA_REQ_ASYNC  0x1
-#define CODA_REQ_READ   0x2
-#define CODA_REQ_WRITE  0x4
-#define CODA_REQ_ABORT  0x8
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/coff.h b/ANDROID_3.4.5/include/linux/coff.h
deleted file mode 100644
index 6354a7fe..00000000
--- a/ANDROID_3.4.5/include/linux/coff.h
+++ /dev/null
@@ -1,351 +0,0 @@
-/* This file is derived from the GAS 2.1.4 assembler control file.
-   The GAS product is under the GNU General Public License, version 2 or later.
-   As such, this file is also under that license.
-
-   If the file format changes in the COFF object, this file should be
-   subsequently updated to reflect the changes.
-
-   The actual loader module only uses a few of these structures. The full
-   set is documented here because I received the full set. If you wish
-   more information about COFF, then O'Reilly has a very excellent book.
-*/
-
-#define  E_SYMNMLEN  8   /* Number of characters in a symbol name         */
-#define  E_FILNMLEN 14   /* Number of characters in a file name           */
-#define  E_DIMNUM    4   /* Number of array dimensions in auxiliary entry */
-
-/*
- * These defines are byte order independent. There is no alignment of fields
- * permitted in the structures. Therefore they are declared as characters
- * and the values loaded from the character positions. It also makes it
- * nice to have it "endian" independent.
- */
- 
-/* Load a short int from the following tables with little-endian formats */
-#define COFF_SHORT_L(ps) ((short)(((unsigned short)((unsigned char)ps[1])<<8)|\
-				  ((unsigned short)((unsigned char)ps[0]))))
-
-/* Load a long int from the following tables with little-endian formats */
-#define COFF_LONG_L(ps) (((long)(((unsigned long)((unsigned char)ps[3])<<24) |\
-				 ((unsigned long)((unsigned char)ps[2])<<16) |\
-				 ((unsigned long)((unsigned char)ps[1])<<8)  |\
-				 ((unsigned long)((unsigned char)ps[0])))))
- 
-/* Load a short int from the following tables with big-endian formats */
-#define COFF_SHORT_H(ps) ((short)(((unsigned short)((unsigned char)ps[0])<<8)|\
-				  ((unsigned short)((unsigned char)ps[1]))))
-
-/* Load a long int from the following tables with big-endian formats */
-#define COFF_LONG_H(ps) (((long)(((unsigned long)((unsigned char)ps[0])<<24) |\
-				 ((unsigned long)((unsigned char)ps[1])<<16) |\
-				 ((unsigned long)((unsigned char)ps[2])<<8)  |\
-				 ((unsigned long)((unsigned char)ps[3])))))
-
-/* These may be overridden later by brain dead implementations which generate
-   a big-endian header with little-endian data. In that case, generate a
-   replacement macro which tests a flag and uses either of the two above
-   as appropriate. */
-
-#define COFF_LONG(v)   COFF_LONG_L(v)
-#define COFF_SHORT(v)  COFF_SHORT_L(v)
-
-/*** coff information for Intel 386/486.  */
-
-/********************** FILE HEADER **********************/
-
-struct COFF_filehdr {
-	char f_magic[2];	/* magic number			*/
-	char f_nscns[2];	/* number of sections		*/
-	char f_timdat[4];	/* time & date stamp		*/
-	char f_symptr[4];	/* file pointer to symtab	*/
-	char f_nsyms[4];	/* number of symtab entries	*/
-	char f_opthdr[2];	/* sizeof(optional hdr)		*/
-	char f_flags[2];	/* flags			*/
-};
-
-/*
- *   Bits for f_flags:
- *
- *	F_RELFLG	relocation info stripped from file
- *	F_EXEC		file is executable  (i.e. no unresolved external
- *			references)
- *	F_LNNO		line numbers stripped from file
- *	F_LSYMS		local symbols stripped from file
- *	F_MINMAL	this is a minimal object file (".m") output of fextract
- *	F_UPDATE	this is a fully bound update file, output of ogen
- *	F_SWABD		this file has had its bytes swabbed (in names)
- *	F_AR16WR	this file has the byte ordering of an AR16WR
- *			(e.g. 11/70) machine
- *	F_AR32WR	this file has the byte ordering of an AR32WR machine
- *			(e.g. vax and iNTEL 386)
- *	F_AR32W		this file has the byte ordering of an AR32W machine
- *			(e.g. 3b,maxi)
- *	F_PATCH		file contains "patch" list in optional header
- *	F_NODF		(minimal file only) no decision functions for
- *			replaced functions
- */
-
-#define  COFF_F_RELFLG		0000001
-#define  COFF_F_EXEC		0000002
-#define  COFF_F_LNNO		0000004
-#define  COFF_F_LSYMS		0000010
-#define  COFF_F_MINMAL		0000020
-#define  COFF_F_UPDATE		0000040
-#define  COFF_F_SWABD		0000100
-#define  COFF_F_AR16WR		0000200
-#define  COFF_F_AR32WR		0000400
-#define  COFF_F_AR32W		0001000
-#define  COFF_F_PATCH		0002000
-#define  COFF_F_NODF		0002000
-
-#define	COFF_I386MAGIC	        0x14c   /* Linux's system    */
-
-#if 0   /* Perhaps, someday, these formats may be used.      */
-#define COFF_I386PTXMAGIC	0x154
-#define COFF_I386AIXMAGIC	0x175   /* IBM's AIX system  */
-#define COFF_I386BADMAG(x) ((COFF_SHORT((x).f_magic) != COFF_I386MAGIC) \
-			  && COFF_SHORT((x).f_magic) != COFF_I386PTXMAGIC \
-			  && COFF_SHORT((x).f_magic) != COFF_I386AIXMAGIC)
-#else
-#define COFF_I386BADMAG(x) (COFF_SHORT((x).f_magic) != COFF_I386MAGIC)
-#endif
-
-#define	COFF_FILHDR	struct COFF_filehdr
-#define	COFF_FILHSZ	sizeof(COFF_FILHDR)
-
-/********************** AOUT "OPTIONAL HEADER" **********************/
-
-/* Linux COFF must have this "optional" header. Standard COFF has no entry
-   location for the "entry" point. They normally would start with the first
-   location of the .text section. This is not a good idea for linux. So,
-   the use of this "optional" header is not optional. It is required.
-
-   Do not be tempted to assume that the size of the optional header is
-   a constant and simply index the next byte by the size of this structure.
-   Use the 'f_opthdr' field in the main coff header for the size of the
-   structure actually written to the file!!
-*/
-
-typedef struct 
-{
-  char 	magic[2];		/* type of file				 */
-  char	vstamp[2];		/* version stamp			 */
-  char	tsize[4];		/* text size in bytes, padded to FW bdry */
-  char	dsize[4];		/* initialized   data "   "		 */
-  char	bsize[4];		/* uninitialized data "   "		 */
-  char	entry[4];		/* entry pt.				 */
-  char 	text_start[4];		/* base of text used for this file       */
-  char 	data_start[4];		/* base of data used for this file       */
-}
-COFF_AOUTHDR;
-
-#define COFF_AOUTSZ (sizeof(COFF_AOUTHDR))
-
-#define COFF_STMAGIC	0401
-#define COFF_OMAGIC     0404
-#define COFF_JMAGIC     0407    /* dirty text and data image, can't share  */
-#define COFF_DMAGIC     0410    /* dirty text segment, data aligned        */
-#define COFF_ZMAGIC     0413    /* The proper magic number for executables  */
-#define COFF_SHMAGIC	0443	/* shared library header                   */
-
-/********************** SECTION HEADER **********************/
-
-struct COFF_scnhdr {
-  char		s_name[8];	/* section name			    */
-  char		s_paddr[4];	/* physical address, aliased s_nlib */
-  char		s_vaddr[4];	/* virtual address		    */
-  char		s_size[4];	/* section size			    */
-  char		s_scnptr[4];	/* file ptr to raw data for section */
-  char		s_relptr[4];	/* file ptr to relocation	    */
-  char		s_lnnoptr[4];	/* file ptr to line numbers	    */
-  char		s_nreloc[2];	/* number of relocation entries	    */
-  char		s_nlnno[2];	/* number of line number entries    */
-  char		s_flags[4];	/* flags			    */
-};
-
-#define	COFF_SCNHDR	struct COFF_scnhdr
-#define	COFF_SCNHSZ	sizeof(COFF_SCNHDR)
-
-/*
- * names of "special" sections
- */
-
-#define COFF_TEXT	".text"
-#define COFF_DATA	".data"
-#define COFF_BSS	".bss"
-#define COFF_COMMENT    ".comment"
-#define COFF_LIB        ".lib"
-
-#define COFF_SECT_TEXT  0      /* Section for instruction code             */
-#define COFF_SECT_DATA  1      /* Section for initialized globals          */
-#define COFF_SECT_BSS   2      /* Section for un-initialized globals       */
-#define COFF_SECT_REQD  3      /* Minimum number of sections for good file */
-
-#define COFF_STYP_REG     0x00 /* regular segment                          */
-#define COFF_STYP_DSECT   0x01 /* dummy segment                            */
-#define COFF_STYP_NOLOAD  0x02 /* no-load segment                          */
-#define COFF_STYP_GROUP   0x04 /* group segment                            */
-#define COFF_STYP_PAD     0x08 /* .pad segment                             */
-#define COFF_STYP_COPY    0x10 /* copy section                             */
-#define COFF_STYP_TEXT    0x20 /* .text segment                            */
-#define COFF_STYP_DATA    0x40 /* .data segment                            */
-#define COFF_STYP_BSS     0x80 /* .bss segment                             */
-#define COFF_STYP_INFO   0x200 /* .comment section                         */
-#define COFF_STYP_OVER   0x400 /* overlay section                          */
-#define COFF_STYP_LIB    0x800 /* library section                          */
-
-/*
- * Shared libraries have the following section header in the data field for
- * each library.
- */
-
-struct COFF_slib {
-  char		sl_entsz[4];	/* Size of this entry               */
-  char		sl_pathndx[4];	/* size of the header field         */
-};
-
-#define	COFF_SLIBHD	struct COFF_slib
-#define	COFF_SLIBSZ	sizeof(COFF_SLIBHD)
-
-/********************** LINE NUMBERS **********************/
-
-/* 1 line number entry for every "breakpointable" source line in a section.
- * Line numbers are grouped on a per function basis; first entry in a function
- * grouping will have l_lnno = 0 and in place of physical address will be the
- * symbol table index of the function name.
- */
-
-struct COFF_lineno {
-  union {
-    char l_symndx[4];	/* function name symbol index, iff l_lnno == 0*/
-    char l_paddr[4];	/* (physical) address of line number	*/
-  } l_addr;
-  char l_lnno[2];	/* line number		*/
-};
-
-#define	COFF_LINENO	struct COFF_lineno
-#define	COFF_LINESZ	6
-
-/********************** SYMBOLS **********************/
-
-#define COFF_E_SYMNMLEN	 8	/* # characters in a short symbol name	*/
-#define COFF_E_FILNMLEN	14	/* # characters in a file name		*/
-#define COFF_E_DIMNUM	 4	/* # array dimensions in auxiliary entry */
-
-/*
- *  All symbols and sections have the following definition
- */
-
-struct COFF_syment 
-{
-  union {
-    char e_name[E_SYMNMLEN];    /* Symbol name (first 8 characters) */
-    struct {
-      char e_zeroes[4];         /* Leading zeros */
-      char e_offset[4];         /* Offset if this is a header section */
-    } e;
-  } e;
-
-  char e_value[4];              /* Value (address) of the segment */
-  char e_scnum[2];              /* Section number */
-  char e_type[2];               /* Type of section */
-  char e_sclass[1];             /* Loader class */
-  char e_numaux[1];             /* Number of auxiliary entries which follow */
-};
-
-#define COFF_N_BTMASK	(0xf)   /* Mask for important class bits */
-#define COFF_N_TMASK	(0x30)  /* Mask for important type bits  */
-#define COFF_N_BTSHFT	(4)     /* # bits to shift class field   */
-#define COFF_N_TSHIFT	(2)     /* # bits to shift type field    */
-
-/*
- *  Auxiliary entries because the main table is too limiting.
- */
-  
-union COFF_auxent {
-
-/*
- *  Debugger information
- */
-
-  struct {
-    char x_tagndx[4];	        /* str, un, or enum tag indx */
-    union {
-      struct {
-	char  x_lnno[2];        /* declaration line number */
-	char  x_size[2];        /* str/union/array size */
-      } x_lnsz;
-      char x_fsize[4];	        /* size of function */
-    } x_misc;
-
-    union {
-      struct {		        /* if ISFCN, tag, or .bb */
-	char x_lnnoptr[4];	/* ptr to fcn line # */
-	char x_endndx[4];	/* entry ndx past block end */
-      } x_fcn;
-
-      struct {		        /* if ISARY, up to 4 dimen. */
-	char x_dimen[E_DIMNUM][2];
-      } x_ary;
-    } x_fcnary;
-
-    char x_tvndx[2];	/* tv index */
-  } x_sym;
-
-/*
- *   Source file names (debugger information)
- */
-
-  union {
-    char x_fname[E_FILNMLEN];
-    struct {
-      char x_zeroes[4];
-      char x_offset[4];
-    } x_n;
-  } x_file;
-
-/*
- *   Section information
- */
-
-  struct {
-    char x_scnlen[4];	/* section length */
-    char x_nreloc[2];	/* # relocation entries */
-    char x_nlinno[2];	/* # line numbers */
-  } x_scn;
-
-/*
- *   Transfer vector (branch table)
- */
-  
-  struct {
-    char x_tvfill[4];	/* tv fill value */
-    char x_tvlen[2];	/* length of .tv */
-    char x_tvran[2][2];	/* tv range */
-  } x_tv;		/* info about .tv section (in auxent of symbol .tv)) */
-};
-
-#define	COFF_SYMENT	struct COFF_syment
-#define	COFF_SYMESZ	18	
-#define	COFF_AUXENT	union COFF_auxent
-#define	COFF_AUXESZ	18
-
-#define COFF_ETEXT	"etext"
-
-/********************** RELOCATION DIRECTIVES **********************/
-
-struct COFF_reloc {
-  char r_vaddr[4];        /* Virtual address of item    */
-  char r_symndx[4];       /* Symbol index in the symtab */
-  char r_type[2];         /* Relocation type            */
-};
-
-#define COFF_RELOC struct COFF_reloc
-#define COFF_RELSZ 10
-
-#define COFF_DEF_DATA_SECTION_ALIGNMENT  4
-#define COFF_DEF_BSS_SECTION_ALIGNMENT   4
-#define COFF_DEF_TEXT_SECTION_ALIGNMENT  4
-
-/* For new sections we haven't heard of before */
-#define COFF_DEF_SECTION_ALIGNMENT       4
diff --git a/ANDROID_3.4.5/include/linux/com20020.h b/ANDROID_3.4.5/include/linux/com20020.h
deleted file mode 100644
index 5dcfb944..00000000
--- a/ANDROID_3.4.5/include/linux/com20020.h
+++ /dev/null
@@ -1,116 +0,0 @@
-/*
- * Linux ARCnet driver - COM20020 chipset support - function declarations
- * 
- * Written 1997 by David Woodhouse.
- * Written 1994-1999 by Avery Pennarun.
- * Derived from skeleton.c by Donald Becker.
- *
- * Special thanks to Contemporary Controls, Inc. (www.ccontrols.com)
- *  for sponsoring the further development of this driver.
- *
- * **********************
- *
- * The original copyright of skeleton.c was as follows:
- *
- * skeleton.c Written 1993 by Donald Becker.
- * Copyright 1993 United States Government as represented by the
- * Director, National Security Agency.  This software may only be used
- * and distributed according to the terms of the GNU General Public License as
- * modified by SRC, incorporated herein by reference.
- *
- * **********************
- *
- * For more details, see drivers/net/arcnet.c
- *
- * **********************
- */
-#ifndef __COM20020_H
-#define __COM20020_H
-
-int com20020_check(struct net_device *dev);
-int com20020_found(struct net_device *dev, int shared);
-extern const struct net_device_ops com20020_netdev_ops;
-
-/* The number of low I/O ports used by the card. */
-#define ARCNET_TOTAL_SIZE 8
-
-/* various register addresses */
-#ifdef CONFIG_SA1100_CT6001
-#define BUS_ALIGN  2  /* 8 bit device on a 16 bit bus - needs padding */
-#else
-#define BUS_ALIGN  1
-#endif
-
-
-#define _INTMASK  (ioaddr+BUS_ALIGN*0)	/* writable */
-#define _STATUS   (ioaddr+BUS_ALIGN*0)	/* readable */
-#define _COMMAND  (ioaddr+BUS_ALIGN*1)	/* standard arcnet commands */
-#define _DIAGSTAT (ioaddr+BUS_ALIGN*1)	/* diagnostic status register */
-#define _ADDR_HI  (ioaddr+BUS_ALIGN*2)	/* control registers for IO-mapped memory */
-#define _ADDR_LO  (ioaddr+BUS_ALIGN*3)
-#define _MEMDATA  (ioaddr+BUS_ALIGN*4)	/* data port for IO-mapped memory */
-#define _SUBADR   (ioaddr+BUS_ALIGN*5)	/* the extended port _XREG refers to */
-#define _CONFIG   (ioaddr+BUS_ALIGN*6)	/* configuration register */
-#define _XREG     (ioaddr+BUS_ALIGN*7)	/* extra registers (indexed by _CONFIG
-  					or _SUBADR) */
-
-/* in the ADDR_HI register */
-#define RDDATAflag	0x80	/* next access is a read (not a write) */
-
-/* in the DIAGSTAT register */
-#define NEWNXTIDflag	0x02	/* ID to which token is passed has changed */
-
-/* in the CONFIG register */
-#define RESETcfg	0x80	/* put card in reset state */
-#define TXENcfg		0x20	/* enable TX */
-
-/* in SETUP register */
-#define PROMISCset	0x10	/* enable RCV_ALL */
-#define P1MODE		0x80    /* enable P1-MODE for Backplane */
-#define SLOWARB		0x01    /* enable Slow Arbitration for >=5Mbps */
-
-/* COM2002x */
-#define SUB_TENTATIVE	0	/* tentative node ID */
-#define SUB_NODE	1	/* node ID */
-#define SUB_SETUP1	2	/* various options */
-#define SUB_TEST	3	/* test/diag register */
-
-/* COM20022 only */
-#define SUB_SETUP2	4	/* sundry options */
-#define SUB_BUSCTL	5	/* bus control options */
-#define SUB_DMACOUNT	6	/* DMA count options */
-
-#define SET_SUBADR(x) do { \
-	if ((x) < 4) \
-	{ \
-		lp->config = (lp->config & ~0x03) | (x); \
-		SETCONF; \
-	} \
-	else \
-	{ \
-		outb(x, _SUBADR); \
-	} \
-} while (0)
-
-#undef ARCRESET
-#undef ASTATUS
-#undef ACOMMAND
-#undef AINTMASK
-
-#define ARCRESET { outb(lp->config | 0x80, _CONFIG); \
-		    udelay(5);                        \
-		    outb(lp->config , _CONFIG);       \
-                  }
-#define ARCRESET0 { outb(0x18 | 0x80, _CONFIG);   \
-		    udelay(5);                       \
-		    outb(0x18 , _CONFIG);            \
-                  }
-
-#define ASTATUS()	inb(_STATUS)
-#define ADIAGSTATUS()	inb(_DIAGSTAT)
-#define ACOMMAND(cmd)	outb((cmd),_COMMAND)
-#define AINTMASK(msk)	outb((msk),_INTMASK)
-
-#define SETCONF		outb(lp->config, _CONFIG)
-
-#endif /* __COM20020_H */
diff --git a/ANDROID_3.4.5/include/linux/combo_mt66xx.h b/ANDROID_3.4.5/include/linux/combo_mt66xx.h
deleted file mode 100755
index 7f46cf7f..00000000
--- a/ANDROID_3.4.5/include/linux/combo_mt66xx.h
+++ /dev/null
@@ -1,25 +0,0 @@
-
-
-#ifndef __COMBO_MT66XX_H__
-#define __COMBO_MT66xx_H__
-
-struct mtk_wmt_platform_data {
-	/* GPIO pin config */
-	int pmu;
-	int rst;
-	int bgf_int;
-	int urt_cts;
-	int rtc;
-	int gps_sync;
-	int gps_lna;
-
-	/* kernel launcher parameter. */
-	
-};
-
-struct mtk_sdio_eint_platform_data {
-	/* used for sdio eint. */
-	int sdio_eint;
-};
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/compaction.h b/ANDROID_3.4.5/include/linux/compaction.h
deleted file mode 100644
index 51a90b7f..00000000
--- a/ANDROID_3.4.5/include/linux/compaction.h
+++ /dev/null
@@ -1,109 +0,0 @@
-#ifndef _LINUX_COMPACTION_H
-#define _LINUX_COMPACTION_H
-
-/* Return values for compact_zone() and try_to_compact_pages() */
-/* compaction didn't start as it was not possible or direct reclaim was more suitable */
-#define COMPACT_SKIPPED		0
-/* compaction should continue to another pageblock */
-#define COMPACT_CONTINUE	1
-/* direct compaction partially compacted a zone and there are suitable pages */
-#define COMPACT_PARTIAL		2
-/* The full zone was compacted */
-#define COMPACT_COMPLETE	3
-
-#ifdef CONFIG_COMPACTION
-extern int sysctl_compact_memory;
-extern int sysctl_compaction_handler(struct ctl_table *table, int write,
-			void __user *buffer, size_t *length, loff_t *ppos);
-extern int sysctl_extfrag_threshold;
-extern int sysctl_extfrag_handler(struct ctl_table *table, int write,
-			void __user *buffer, size_t *length, loff_t *ppos);
-
-extern int fragmentation_index(struct zone *zone, unsigned int order);
-extern unsigned long try_to_compact_pages(struct zonelist *zonelist,
-			int order, gfp_t gfp_mask, nodemask_t *mask,
-			bool sync);
-extern int compact_pgdat(pg_data_t *pgdat, int order);
-extern unsigned long compaction_suitable(struct zone *zone, int order);
-
-/* Do not skip compaction more than 64 times */
-#define COMPACT_MAX_DEFER_SHIFT 6
-
-/*
- * Compaction is deferred when compaction fails to result in a page
- * allocation success. 1 << compact_defer_limit compactions are skipped up
- * to a limit of 1 << COMPACT_MAX_DEFER_SHIFT
- */
-static inline void defer_compaction(struct zone *zone, int order)
-{
-	zone->compact_considered = 0;
-	zone->compact_defer_shift++;
-
-	if (order < zone->compact_order_failed)
-		zone->compact_order_failed = order;
-
-	if (zone->compact_defer_shift > COMPACT_MAX_DEFER_SHIFT)
-		zone->compact_defer_shift = COMPACT_MAX_DEFER_SHIFT;
-}
-
-/* Returns true if compaction should be skipped this time */
-static inline bool compaction_deferred(struct zone *zone, int order)
-{
-	unsigned long defer_limit = 1UL << zone->compact_defer_shift;
-
-	if (order < zone->compact_order_failed)
-		return false;
-
-	/* Avoid possible overflow */
-	if (++zone->compact_considered > defer_limit)
-		zone->compact_considered = defer_limit;
-
-	return zone->compact_considered < (1UL << zone->compact_defer_shift);
-}
-
-#else
-static inline unsigned long try_to_compact_pages(struct zonelist *zonelist,
-			int order, gfp_t gfp_mask, nodemask_t *nodemask,
-			bool sync)
-{
-	return COMPACT_CONTINUE;
-}
-
-static inline int compact_pgdat(pg_data_t *pgdat, int order)
-{
-	return COMPACT_CONTINUE;
-}
-
-static inline unsigned long compaction_suitable(struct zone *zone, int order)
-{
-	return COMPACT_SKIPPED;
-}
-
-static inline void defer_compaction(struct zone *zone, int order)
-{
-}
-
-static inline bool compaction_deferred(struct zone *zone, int order)
-{
-	return 1;
-}
-
-#endif /* CONFIG_COMPACTION */
-
-#if defined(CONFIG_COMPACTION) && defined(CONFIG_SYSFS) && defined(CONFIG_NUMA)
-extern int compaction_register_node(struct node *node);
-extern void compaction_unregister_node(struct node *node);
-
-#else
-
-static inline int compaction_register_node(struct node *node)
-{
-	return 0;
-}
-
-static inline void compaction_unregister_node(struct node *node)
-{
-}
-#endif /* CONFIG_COMPACTION && CONFIG_SYSFS && CONFIG_NUMA */
-
-#endif /* _LINUX_COMPACTION_H */
diff --git a/ANDROID_3.4.5/include/linux/compat.h b/ANDROID_3.4.5/include/linux/compat.h
deleted file mode 100644
index 5d46217f..00000000
--- a/ANDROID_3.4.5/include/linux/compat.h
+++ /dev/null
@@ -1,599 +0,0 @@
-#ifndef _LINUX_COMPAT_H
-#define _LINUX_COMPAT_H
-/*
- * These are the type definitions for the architecture specific
- * syscall compatibility layer.
- */
-
-#ifdef CONFIG_COMPAT
-
-#include <linux/stat.h>
-#include <linux/param.h>	/* for HZ */
-#include <linux/sem.h>
-#include <linux/socket.h>
-#include <linux/if.h>
-#include <linux/fs.h>
-#include <linux/aio_abi.h>	/* for aio_context_t */
-
-#include <asm/compat.h>
-#include <asm/siginfo.h>
-#include <asm/signal.h>
-
-#ifndef COMPAT_USE_64BIT_TIME
-#define COMPAT_USE_64BIT_TIME 0
-#endif
-
-#define compat_jiffies_to_clock_t(x)	\
-		(((unsigned long)(x) * COMPAT_USER_HZ) / HZ)
-
-typedef __compat_uid32_t	compat_uid_t;
-typedef __compat_gid32_t	compat_gid_t;
-
-struct compat_sel_arg_struct;
-struct rusage;
-
-struct compat_itimerspec {
-	struct compat_timespec it_interval;
-	struct compat_timespec it_value;
-};
-
-struct compat_utimbuf {
-	compat_time_t		actime;
-	compat_time_t		modtime;
-};
-
-struct compat_itimerval {
-	struct compat_timeval	it_interval;
-	struct compat_timeval	it_value;
-};
-
-struct compat_tms {
-	compat_clock_t		tms_utime;
-	compat_clock_t		tms_stime;
-	compat_clock_t		tms_cutime;
-	compat_clock_t		tms_cstime;
-};
-
-struct compat_timex {
-	compat_uint_t modes;
-	compat_long_t offset;
-	compat_long_t freq;
-	compat_long_t maxerror;
-	compat_long_t esterror;
-	compat_int_t status;
-	compat_long_t constant;
-	compat_long_t precision;
-	compat_long_t tolerance;
-	struct compat_timeval time;
-	compat_long_t tick;
-	compat_long_t ppsfreq;
-	compat_long_t jitter;
-	compat_int_t shift;
-	compat_long_t stabil;
-	compat_long_t jitcnt;
-	compat_long_t calcnt;
-	compat_long_t errcnt;
-	compat_long_t stbcnt;
-	compat_int_t tai;
-
-	compat_int_t:32; compat_int_t:32; compat_int_t:32; compat_int_t:32;
-	compat_int_t:32; compat_int_t:32; compat_int_t:32; compat_int_t:32;
-	compat_int_t:32; compat_int_t:32; compat_int_t:32;
-};
-
-#define _COMPAT_NSIG_WORDS	(_COMPAT_NSIG / _COMPAT_NSIG_BPW)
-
-typedef struct {
-	compat_sigset_word	sig[_COMPAT_NSIG_WORDS];
-} compat_sigset_t;
-
-/*
- * These functions operate strictly on struct compat_time*
- */
-extern int get_compat_timespec(struct timespec *,
-			       const struct compat_timespec __user *);
-extern int put_compat_timespec(const struct timespec *,
-			       struct compat_timespec __user *);
-extern int get_compat_timeval(struct timeval *,
-			      const struct compat_timeval __user *);
-extern int put_compat_timeval(const struct timeval *,
-			      struct compat_timeval __user *);
-/*
- * These functions operate on 32- or 64-bit specs depending on
- * COMPAT_USE_64BIT_TIME, hence the void user pointer arguments and the
- * naming as compat_get/put_ rather than get/put_compat_.
- */
-extern int compat_get_timespec(struct timespec *, const void __user *);
-extern int compat_put_timespec(const struct timespec *, void __user *);
-extern int compat_get_timeval(struct timeval *, const void __user *);
-extern int compat_put_timeval(const struct timeval *, void __user *);
-
-struct compat_iovec {
-	compat_uptr_t	iov_base;
-	compat_size_t	iov_len;
-};
-
-struct compat_rlimit {
-	compat_ulong_t	rlim_cur;
-	compat_ulong_t	rlim_max;
-};
-
-struct compat_rusage {
-	struct compat_timeval ru_utime;
-	struct compat_timeval ru_stime;
-	compat_long_t	ru_maxrss;
-	compat_long_t	ru_ixrss;
-	compat_long_t	ru_idrss;
-	compat_long_t	ru_isrss;
-	compat_long_t	ru_minflt;
-	compat_long_t	ru_majflt;
-	compat_long_t	ru_nswap;
-	compat_long_t	ru_inblock;
-	compat_long_t	ru_oublock;
-	compat_long_t	ru_msgsnd;
-	compat_long_t	ru_msgrcv;
-	compat_long_t	ru_nsignals;
-	compat_long_t	ru_nvcsw;
-	compat_long_t	ru_nivcsw;
-};
-
-extern int put_compat_rusage(const struct rusage *,
-			     struct compat_rusage __user *);
-
-struct compat_siginfo;
-
-extern asmlinkage long compat_sys_waitid(int, compat_pid_t,
-		struct compat_siginfo __user *, int,
-		struct compat_rusage __user *);
-
-struct compat_dirent {
-	u32		d_ino;
-	compat_off_t	d_off;
-	u16		d_reclen;
-	char		d_name[256];
-};
-
-struct compat_ustat {
-	compat_daddr_t		f_tfree;
-	compat_ino_t		f_tinode;
-	char			f_fname[6];
-	char			f_fpack[6];
-};
-
-typedef union compat_sigval {
-	compat_int_t	sival_int;
-	compat_uptr_t	sival_ptr;
-} compat_sigval_t;
-
-#define COMPAT_SIGEV_PAD_SIZE	((SIGEV_MAX_SIZE/sizeof(int)) - 3)
-
-typedef struct compat_sigevent {
-	compat_sigval_t sigev_value;
-	compat_int_t sigev_signo;
-	compat_int_t sigev_notify;
-	union {
-		compat_int_t _pad[COMPAT_SIGEV_PAD_SIZE];
-		compat_int_t _tid;
-
-		struct {
-			compat_uptr_t _function;
-			compat_uptr_t _attribute;
-		} _sigev_thread;
-	} _sigev_un;
-} compat_sigevent_t;
-
-struct compat_ifmap {
-	compat_ulong_t mem_start;
-	compat_ulong_t mem_end;
-	unsigned short base_addr;
-	unsigned char irq;
-	unsigned char dma;
-	unsigned char port;
-};
-
-struct compat_if_settings {
-	unsigned int type;	/* Type of physical device or protocol */
-	unsigned int size;	/* Size of the data allocated by the caller */
-	compat_uptr_t ifs_ifsu;	/* union of pointers */
-};
-
-struct compat_ifreq {
-	union {
-		char	ifrn_name[IFNAMSIZ];    /* if name, e.g. "en0" */
-	} ifr_ifrn;
-	union {
-		struct	sockaddr ifru_addr;
-		struct	sockaddr ifru_dstaddr;
-		struct	sockaddr ifru_broadaddr;
-		struct	sockaddr ifru_netmask;
-		struct	sockaddr ifru_hwaddr;
-		short	ifru_flags;
-		compat_int_t	ifru_ivalue;
-		compat_int_t	ifru_mtu;
-		struct	compat_ifmap ifru_map;
-		char	ifru_slave[IFNAMSIZ];   /* Just fits the size */
-		char	ifru_newname[IFNAMSIZ];
-		compat_caddr_t	ifru_data;
-		struct	compat_if_settings ifru_settings;
-	} ifr_ifru;
-};
-
-struct compat_ifconf {
-	compat_int_t	ifc_len;                /* size of buffer */
-	compat_caddr_t  ifcbuf;
-};
-
-struct compat_robust_list {
-	compat_uptr_t			next;
-};
-
-struct compat_robust_list_head {
-	struct compat_robust_list	list;
-	compat_long_t			futex_offset;
-	compat_uptr_t			list_op_pending;
-};
-
-struct compat_statfs;
-struct compat_statfs64;
-struct compat_old_linux_dirent;
-struct compat_linux_dirent;
-struct linux_dirent64;
-struct compat_msghdr;
-struct compat_mmsghdr;
-struct compat_sysinfo;
-struct compat_sysctl_args;
-struct compat_kexec_segment;
-struct compat_mq_attr;
-struct compat_msgbuf;
-
-extern void compat_exit_robust_list(struct task_struct *curr);
-
-asmlinkage long
-compat_sys_set_robust_list(struct compat_robust_list_head __user *head,
-			   compat_size_t len);
-asmlinkage long
-compat_sys_get_robust_list(int pid, compat_uptr_t __user *head_ptr,
-			   compat_size_t __user *len_ptr);
-
-#ifdef CONFIG_ARCH_WANT_OLD_COMPAT_IPC
-long compat_sys_semctl(int first, int second, int third, void __user *uptr);
-long compat_sys_msgsnd(int first, int second, int third, void __user *uptr);
-long compat_sys_msgrcv(int first, int second, int msgtyp, int third,
-		int version, void __user *uptr);
-long compat_sys_shmat(int first, int second, compat_uptr_t third, int version,
-		void __user *uptr);
-#else
-long compat_sys_semctl(int semid, int semnum, int cmd, int arg);
-long compat_sys_msgsnd(int msqid, struct compat_msgbuf __user *msgp,
-		size_t msgsz, int msgflg);
-long compat_sys_msgrcv(int msqid, struct compat_msgbuf __user *msgp,
-		size_t msgsz, long msgtyp, int msgflg);
-long compat_sys_shmat(int shmid, compat_uptr_t shmaddr, int shmflg);
-#endif
-long compat_sys_msgctl(int first, int second, void __user *uptr);
-long compat_sys_shmctl(int first, int second, void __user *uptr);
-long compat_sys_semtimedop(int semid, struct sembuf __user *tsems,
-		unsigned nsems, const struct compat_timespec __user *timeout);
-asmlinkage long compat_sys_keyctl(u32 option,
-			      u32 arg2, u32 arg3, u32 arg4, u32 arg5);
-asmlinkage long compat_sys_ustat(unsigned dev, struct compat_ustat __user *u32);
-
-asmlinkage ssize_t compat_sys_readv(unsigned long fd,
-		const struct compat_iovec __user *vec, unsigned long vlen);
-asmlinkage ssize_t compat_sys_writev(unsigned long fd,
-		const struct compat_iovec __user *vec, unsigned long vlen);
-asmlinkage ssize_t compat_sys_preadv(unsigned long fd,
-		const struct compat_iovec __user *vec,
-		unsigned long vlen, u32 pos_low, u32 pos_high);
-asmlinkage ssize_t compat_sys_pwritev(unsigned long fd,
-		const struct compat_iovec __user *vec,
-		unsigned long vlen, u32 pos_low, u32 pos_high);
-
-int compat_do_execve(char *filename, compat_uptr_t __user *argv,
-		     compat_uptr_t __user *envp, struct pt_regs *regs);
-
-asmlinkage long compat_sys_select(int n, compat_ulong_t __user *inp,
-		compat_ulong_t __user *outp, compat_ulong_t __user *exp,
-		struct compat_timeval __user *tvp);
-
-asmlinkage long compat_sys_old_select(struct compat_sel_arg_struct __user *arg);
-
-asmlinkage long compat_sys_wait4(compat_pid_t pid,
-				 compat_uint_t __user *stat_addr, int options,
-				 struct compat_rusage __user *ru);
-
-#define BITS_PER_COMPAT_LONG    (8*sizeof(compat_long_t))
-
-#define BITS_TO_COMPAT_LONGS(bits) \
-	(((bits)+BITS_PER_COMPAT_LONG-1)/BITS_PER_COMPAT_LONG)
-
-long compat_get_bitmap(unsigned long *mask, const compat_ulong_t __user *umask,
-		       unsigned long bitmap_size);
-long compat_put_bitmap(compat_ulong_t __user *umask, unsigned long *mask,
-		       unsigned long bitmap_size);
-int copy_siginfo_from_user32(siginfo_t *to, struct compat_siginfo __user *from);
-int copy_siginfo_to_user32(struct compat_siginfo __user *to, siginfo_t *from);
-int get_compat_sigevent(struct sigevent *event,
-		const struct compat_sigevent __user *u_event);
-long compat_sys_rt_tgsigqueueinfo(compat_pid_t tgid, compat_pid_t pid, int sig,
-				  struct compat_siginfo __user *uinfo);
-
-static inline int compat_timeval_compare(struct compat_timeval *lhs,
-					struct compat_timeval *rhs)
-{
-	if (lhs->tv_sec < rhs->tv_sec)
-		return -1;
-	if (lhs->tv_sec > rhs->tv_sec)
-		return 1;
-	return lhs->tv_usec - rhs->tv_usec;
-}
-
-static inline int compat_timespec_compare(struct compat_timespec *lhs,
-					struct compat_timespec *rhs)
-{
-	if (lhs->tv_sec < rhs->tv_sec)
-		return -1;
-	if (lhs->tv_sec > rhs->tv_sec)
-		return 1;
-	return lhs->tv_nsec - rhs->tv_nsec;
-}
-
-extern int get_compat_itimerspec(struct itimerspec *dst,
-				 const struct compat_itimerspec __user *src);
-extern int put_compat_itimerspec(struct compat_itimerspec __user *dst,
-				 const struct itimerspec *src);
-
-asmlinkage long compat_sys_gettimeofday(struct compat_timeval __user *tv,
-		struct timezone __user *tz);
-asmlinkage long compat_sys_settimeofday(struct compat_timeval __user *tv,
-		struct timezone __user *tz);
-
-asmlinkage long compat_sys_adjtimex(struct compat_timex __user *utp);
-
-extern int compat_printk(const char *fmt, ...);
-extern void sigset_from_compat(sigset_t *set, compat_sigset_t *compat);
-
-asmlinkage long compat_sys_migrate_pages(compat_pid_t pid,
-		compat_ulong_t maxnode, const compat_ulong_t __user *old_nodes,
-		const compat_ulong_t __user *new_nodes);
-
-extern int compat_ptrace_request(struct task_struct *child,
-				 compat_long_t request,
-				 compat_ulong_t addr, compat_ulong_t data);
-
-extern long compat_arch_ptrace(struct task_struct *child, compat_long_t request,
-			       compat_ulong_t addr, compat_ulong_t data);
-asmlinkage long compat_sys_ptrace(compat_long_t request, compat_long_t pid,
-				  compat_long_t addr, compat_long_t data);
-
-/*
- * epoll (fs/eventpoll.c) compat bits follow ...
- */
-struct epoll_event;
-#define compat_epoll_event	epoll_event
-asmlinkage long compat_sys_epoll_pwait(int epfd,
-			struct compat_epoll_event __user *events,
-			int maxevents, int timeout,
-			const compat_sigset_t __user *sigmask,
-			compat_size_t sigsetsize);
-
-asmlinkage long compat_sys_utime(const char __user *filename,
-				 struct compat_utimbuf __user *t);
-asmlinkage long compat_sys_utimensat(unsigned int dfd,
-				     const char __user *filename,
-				     struct compat_timespec __user *t,
-				     int flags);
-
-asmlinkage long compat_sys_time(compat_time_t __user *tloc);
-asmlinkage long compat_sys_stime(compat_time_t __user *tptr);
-asmlinkage long compat_sys_signalfd(int ufd,
-				    const compat_sigset_t __user *sigmask,
-				    compat_size_t sigsetsize);
-asmlinkage long compat_sys_timerfd_settime(int ufd, int flags,
-				   const struct compat_itimerspec __user *utmr,
-				   struct compat_itimerspec __user *otmr);
-asmlinkage long compat_sys_timerfd_gettime(int ufd,
-				   struct compat_itimerspec __user *otmr);
-
-asmlinkage long compat_sys_move_pages(pid_t pid, unsigned long nr_page,
-				      __u32 __user *pages,
-				      const int __user *nodes,
-				      int __user *status,
-				      int flags);
-asmlinkage long compat_sys_futimesat(unsigned int dfd,
-				     const char __user *filename,
-				     struct compat_timeval __user *t);
-asmlinkage long compat_sys_utimes(const char __user *filename,
-				  struct compat_timeval __user *t);
-asmlinkage long compat_sys_newstat(const char __user *filename,
-				   struct compat_stat __user *statbuf);
-asmlinkage long compat_sys_newlstat(const char __user *filename,
-				    struct compat_stat __user *statbuf);
-asmlinkage long compat_sys_newfstatat(unsigned int dfd,
-				      const char __user *filename,
-				      struct compat_stat __user *statbuf,
-				      int flag);
-asmlinkage long compat_sys_newfstat(unsigned int fd,
-				    struct compat_stat __user *statbuf);
-asmlinkage long compat_sys_statfs(const char __user *pathname,
-				  struct compat_statfs __user *buf);
-asmlinkage long compat_sys_fstatfs(unsigned int fd,
-				   struct compat_statfs __user *buf);
-asmlinkage long compat_sys_statfs64(const char __user *pathname,
-				    compat_size_t sz,
-				    struct compat_statfs64 __user *buf);
-asmlinkage long compat_sys_fstatfs64(unsigned int fd, compat_size_t sz,
-				     struct compat_statfs64 __user *buf);
-asmlinkage long compat_sys_fcntl64(unsigned int fd, unsigned int cmd,
-				   unsigned long arg);
-asmlinkage long compat_sys_fcntl(unsigned int fd, unsigned int cmd,
-				 unsigned long arg);
-asmlinkage long compat_sys_io_setup(unsigned nr_reqs, u32 __user *ctx32p);
-asmlinkage long compat_sys_io_getevents(aio_context_t ctx_id,
-					unsigned long min_nr,
-					unsigned long nr,
-					struct io_event __user *events,
-					struct compat_timespec __user *timeout);
-asmlinkage long compat_sys_io_submit(aio_context_t ctx_id, int nr,
-				     u32 __user *iocb);
-asmlinkage long compat_sys_mount(const char __user *dev_name,
-				 const char __user *dir_name,
-				 const char __user *type, unsigned long flags,
-				 const void __user *data);
-asmlinkage long compat_sys_old_readdir(unsigned int fd,
-				       struct compat_old_linux_dirent __user *,
-				       unsigned int count);
-asmlinkage long compat_sys_getdents(unsigned int fd,
-				    struct compat_linux_dirent __user *dirent,
-				    unsigned int count);
-asmlinkage long compat_sys_getdents64(unsigned int fd,
-				      struct linux_dirent64 __user *dirent,
-				      unsigned int count);
-asmlinkage long compat_sys_vmsplice(int fd, const struct compat_iovec __user *,
-				    unsigned int nr_segs, unsigned int flags);
-asmlinkage long compat_sys_open(const char __user *filename, int flags,
-				umode_t mode);
-asmlinkage long compat_sys_openat(unsigned int dfd, const char __user *filename,
-				  int flags, umode_t mode);
-asmlinkage long compat_sys_open_by_handle_at(int mountdirfd,
-					     struct file_handle __user *handle,
-					     int flags);
-asmlinkage long compat_sys_pselect6(int n, compat_ulong_t __user *inp,
-				    compat_ulong_t __user *outp,
-				    compat_ulong_t __user *exp,
-				    struct compat_timespec __user *tsp,
-				    void __user *sig);
-asmlinkage long compat_sys_ppoll(struct pollfd __user *ufds,
-				 unsigned int nfds,
-				 struct compat_timespec __user *tsp,
-				 const compat_sigset_t __user *sigmask,
-				 compat_size_t sigsetsize);
-asmlinkage long compat_sys_signalfd4(int ufd,
-				     const compat_sigset_t __user *sigmask,
-				     compat_size_t sigsetsize, int flags);
-asmlinkage long compat_sys_get_mempolicy(int __user *policy,
-					 compat_ulong_t __user *nmask,
-					 compat_ulong_t maxnode,
-					 compat_ulong_t addr,
-					 compat_ulong_t flags);
-asmlinkage long compat_sys_set_mempolicy(int mode, compat_ulong_t __user *nmask,
-					 compat_ulong_t maxnode);
-asmlinkage long compat_sys_mbind(compat_ulong_t start, compat_ulong_t len,
-				 compat_ulong_t mode,
-				 compat_ulong_t __user *nmask,
-				 compat_ulong_t maxnode, compat_ulong_t flags);
-
-asmlinkage long compat_sys_setsockopt(int fd, int level, int optname,
-				      char __user *optval, unsigned int optlen);
-asmlinkage long compat_sys_sendmsg(int fd, struct compat_msghdr __user *msg,
-				   unsigned flags);
-asmlinkage long compat_sys_sendmmsg(int fd, struct compat_mmsghdr __user *mmsg,
-				    unsigned vlen, unsigned int flags);
-asmlinkage long compat_sys_recvmsg(int fd, struct compat_msghdr __user *msg,
-				   unsigned int flags);
-asmlinkage long compat_sys_recv(int fd, void __user *buf, size_t len,
-				unsigned flags);
-asmlinkage long compat_sys_recvfrom(int fd, void __user *buf, size_t len,
-			    unsigned flags, struct sockaddr __user *addr,
-			    int __user *addrlen);
-asmlinkage long compat_sys_recvmmsg(int fd, struct compat_mmsghdr __user *mmsg,
-				    unsigned vlen, unsigned int flags,
-				    struct compat_timespec __user *timeout);
-asmlinkage long compat_sys_nanosleep(struct compat_timespec __user *rqtp,
-				     struct compat_timespec __user *rmtp);
-asmlinkage long compat_sys_getitimer(int which,
-				     struct compat_itimerval __user *it);
-asmlinkage long compat_sys_setitimer(int which,
-				     struct compat_itimerval __user *in,
-				     struct compat_itimerval __user *out);
-asmlinkage long compat_sys_times(struct compat_tms __user *tbuf);
-asmlinkage long compat_sys_setrlimit(unsigned int resource,
-				     struct compat_rlimit __user *rlim);
-asmlinkage long compat_sys_getrlimit(unsigned int resource,
-				     struct compat_rlimit __user *rlim);
-asmlinkage long compat_sys_getrusage(int who, struct compat_rusage __user *ru);
-asmlinkage long compat_sys_sched_setaffinity(compat_pid_t pid,
-				     unsigned int len,
-				     compat_ulong_t __user *user_mask_ptr);
-asmlinkage long compat_sys_sched_getaffinity(compat_pid_t pid,
-				     unsigned int len,
-				     compat_ulong_t __user *user_mask_ptr);
-asmlinkage long compat_sys_timer_create(clockid_t which_clock,
-			struct compat_sigevent __user *timer_event_spec,
-			timer_t __user *created_timer_id);
-asmlinkage long compat_sys_timer_settime(timer_t timer_id, int flags,
-					 struct compat_itimerspec __user *new,
-					 struct compat_itimerspec __user *old);
-asmlinkage long compat_sys_timer_gettime(timer_t timer_id,
-				 struct compat_itimerspec __user *setting);
-asmlinkage long compat_sys_clock_settime(clockid_t which_clock,
-					 struct compat_timespec __user *tp);
-asmlinkage long compat_sys_clock_gettime(clockid_t which_clock,
-					 struct compat_timespec __user *tp);
-asmlinkage long compat_sys_clock_adjtime(clockid_t which_clock,
-					 struct compat_timex __user *tp);
-asmlinkage long compat_sys_clock_getres(clockid_t which_clock,
-					struct compat_timespec __user *tp);
-asmlinkage long compat_sys_clock_nanosleep(clockid_t which_clock, int flags,
-					   struct compat_timespec __user *rqtp,
-					   struct compat_timespec __user *rmtp);
-asmlinkage long compat_sys_rt_sigtimedwait(compat_sigset_t __user *uthese,
-		struct compat_siginfo __user *uinfo,
-		struct compat_timespec __user *uts, compat_size_t sigsetsize);
-asmlinkage long compat_sys_rt_sigsuspend(compat_sigset_t __user *unewset,
-					 compat_size_t sigsetsize);
-asmlinkage long compat_sys_sysinfo(struct compat_sysinfo __user *info);
-asmlinkage long compat_sys_ioctl(unsigned int fd, unsigned int cmd,
-				 unsigned long arg);
-asmlinkage long compat_sys_futex(u32 __user *uaddr, int op, u32 val,
-		struct compat_timespec __user *utime, u32 __user *uaddr2,
-		u32 val3);
-asmlinkage long compat_sys_getsockopt(int fd, int level, int optname,
-				      char __user *optval, int __user *optlen);
-asmlinkage long compat_sys_kexec_load(unsigned long entry,
-				      unsigned long nr_segments,
-				      struct compat_kexec_segment __user *,
-				      unsigned long flags);
-asmlinkage long compat_sys_mq_getsetattr(mqd_t mqdes,
-			const struct compat_mq_attr __user *u_mqstat,
-			struct compat_mq_attr __user *u_omqstat);
-asmlinkage long compat_sys_mq_notify(mqd_t mqdes,
-			const struct compat_sigevent __user *u_notification);
-asmlinkage long compat_sys_mq_open(const char __user *u_name,
-			int oflag, compat_mode_t mode,
-			struct compat_mq_attr __user *u_attr);
-asmlinkage long compat_sys_mq_timedsend(mqd_t mqdes,
-			const char __user *u_msg_ptr,
-			size_t msg_len, unsigned int msg_prio,
-			const struct compat_timespec __user *u_abs_timeout);
-asmlinkage ssize_t compat_sys_mq_timedreceive(mqd_t mqdes,
-			char __user *u_msg_ptr,
-			size_t msg_len, unsigned int __user *u_msg_prio,
-			const struct compat_timespec __user *u_abs_timeout);
-asmlinkage long compat_sys_socketcall(int call, u32 __user *args);
-asmlinkage long compat_sys_sysctl(struct compat_sysctl_args __user *args);
-
-extern ssize_t compat_rw_copy_check_uvector(int type,
-		const struct compat_iovec __user *uvector,
-		unsigned long nr_segs,
-		unsigned long fast_segs, struct iovec *fast_pointer,
-		struct iovec **ret_pointer,
-		int check_access);
-
-extern void __user *compat_alloc_user_space(unsigned long len);
-
-asmlinkage ssize_t compat_sys_process_vm_readv(compat_pid_t pid,
-		const struct compat_iovec __user *lvec,
-		unsigned long liovcnt, const struct compat_iovec __user *rvec,
-		unsigned long riovcnt, unsigned long flags);
-asmlinkage ssize_t compat_sys_process_vm_writev(compat_pid_t pid,
-		const struct compat_iovec __user *lvec,
-		unsigned long liovcnt, const struct compat_iovec __user *rvec,
-		unsigned long riovcnt, unsigned long flags);
-
-#else
-
-#define is_compat_task() (0)
-
-#endif /* CONFIG_COMPAT */
-#endif /* _LINUX_COMPAT_H */
diff --git a/ANDROID_3.4.5/include/linux/compiler-gcc.h b/ANDROID_3.4.5/include/linux/compiler-gcc.h
deleted file mode 100644
index e5834aa2..00000000
--- a/ANDROID_3.4.5/include/linux/compiler-gcc.h
+++ /dev/null
@@ -1,112 +0,0 @@
-#ifndef __LINUX_COMPILER_H
-#error "Please don't include <linux/compiler-gcc.h> directly, include <linux/compiler.h> instead."
-#endif
-
-/*
- * Common definitions for all gcc versions go here.
- */
-
-
-/* Optimization barrier */
-/* The "volatile" is due to gcc bugs */
-#define barrier() __asm__ __volatile__("": : :"memory")
-
-/*
- * This macro obfuscates arithmetic on a variable address so that gcc
- * shouldn't recognize the original var, and make assumptions about it.
- *
- * This is needed because the C standard makes it undefined to do
- * pointer arithmetic on "objects" outside their boundaries and the
- * gcc optimizers assume this is the case. In particular they
- * assume such arithmetic does not wrap.
- *
- * A miscompilation has been observed because of this on PPC.
- * To work around it we hide the relationship of the pointer and the object
- * using this macro.
- *
- * Versions of the ppc64 compiler before 4.1 had a bug where use of
- * RELOC_HIDE could trash r30. The bug can be worked around by changing
- * the inline assembly constraint from =g to =r, in this particular
- * case either is valid.
- */
-#define RELOC_HIDE(ptr, off)					\
-  ({ unsigned long __ptr;					\
-    __asm__ ("" : "=r"(__ptr) : "0"(ptr));		\
-    (typeof(ptr)) (__ptr + (off)); })
-
-#ifdef __CHECKER__
-#define __must_be_array(arr) 0
-#else
-/* &a[0] degrades to a pointer: a different type from an array */
-#define __must_be_array(a) BUILD_BUG_ON_ZERO(__same_type((a), &(a)[0]))
-#endif
-
-/*
- * Force always-inline if the user requests it so via the .config,
- * or if gcc is too old:
- */
-#if !defined(CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING) || \
-    !defined(CONFIG_OPTIMIZE_INLINING) || (__GNUC__ < 4)
-# define inline		inline		__attribute__((always_inline))
-# define __inline__	__inline__	__attribute__((always_inline))
-# define __inline	__inline	__attribute__((always_inline))
-#else
-/* A lot of inline functions can cause havoc with function tracing */
-# define inline		inline		notrace
-# define __inline__	__inline__	notrace
-# define __inline	__inline	notrace
-#endif
-
-#define __deprecated			__attribute__((deprecated))
-#define __packed			__attribute__((packed))
-#define __weak				__attribute__((weak))
-
-/*
- * it doesn't make sense on ARM (currently the only user of __naked) to trace
- * naked functions because then mcount is called without stack and frame pointer
- * being set up and there is no chance to restore the lr register to the value
- * before mcount was called.
- *
- * The asm() bodies of naked functions often depend on standard calling conventions,
- * therefore they must be noinline and noclone.  GCC 4.[56] currently fail to enforce
- * this, so we must do so ourselves.  See GCC PR44290.
- */
-#define __naked				__attribute__((naked)) noinline __noclone notrace
-
-#define __noreturn			__attribute__((noreturn))
-
-/*
- * From the GCC manual:
- *
- * Many functions have no effects except the return value and their
- * return value depends only on the parameters and/or global
- * variables.  Such a function can be subject to common subexpression
- * elimination and loop optimization just as an arithmetic operator
- * would be.
- * [...]
- */
-#define __pure				__attribute__((pure))
-#define __aligned(x)			__attribute__((aligned(x)))
-#define __printf(a, b)			__attribute__((format(printf, a, b)))
-#define __scanf(a, b)			__attribute__((format(scanf, a, b)))
-#define  noinline			__attribute__((noinline))
-#define __attribute_const__		__attribute__((__const__))
-#define __maybe_unused			__attribute__((unused))
-#define __always_unused			__attribute__((unused))
-
-#define __gcc_header(x) #x
-#define _gcc_header(x) __gcc_header(linux/compiler-gcc##x.h)
-#define gcc_header(x) _gcc_header(x)
-#include gcc_header(__GNUC__)
-
-#if !defined(__noclone)
-#define __noclone	/* not needed */
-#endif
-
-/*
- * A trick to suppress uninitialized variable warning without generating any
- * code
- */
-#define uninitialized_var(x) x = x
-
-#define __always_inline		inline __attribute__((always_inline))
diff --git a/ANDROID_3.4.5/include/linux/compiler-gcc3.h b/ANDROID_3.4.5/include/linux/compiler-gcc3.h
deleted file mode 100644
index 37d41243..00000000
--- a/ANDROID_3.4.5/include/linux/compiler-gcc3.h
+++ /dev/null
@@ -1,23 +0,0 @@
-#ifndef __LINUX_COMPILER_H
-#error "Please don't include <linux/compiler-gcc3.h> directly, include <linux/compiler.h> instead."
-#endif
-
-#if __GNUC_MINOR__ < 2
-# error Sorry, your compiler is too old - please upgrade it.
-#endif
-
-#if __GNUC_MINOR__ >= 3
-# define __used			__attribute__((__used__))
-#else
-# define __used			__attribute__((__unused__))
-#endif
-
-#if __GNUC_MINOR__ >= 4
-#define __must_check		__attribute__((warn_unused_result))
-#endif
-
-#ifdef CONFIG_GCOV_KERNEL
-# if __GNUC_MINOR__ < 4
-#   error "GCOV profiling support for gcc versions below 3.4 not included"
-# endif /* __GNUC_MINOR__ */
-#endif /* CONFIG_GCOV_KERNEL */
diff --git a/ANDROID_3.4.5/include/linux/compiler-gcc4.h b/ANDROID_3.4.5/include/linux/compiler-gcc4.h
deleted file mode 100644
index 2f407917..00000000
--- a/ANDROID_3.4.5/include/linux/compiler-gcc4.h
+++ /dev/null
@@ -1,58 +0,0 @@
-#ifndef __LINUX_COMPILER_H
-#error "Please don't include <linux/compiler-gcc4.h> directly, include <linux/compiler.h> instead."
-#endif
-
-/* GCC 4.1.[01] miscompiles __weak */
-#ifdef __KERNEL__
-# if __GNUC_MINOR__ == 1 && __GNUC_PATCHLEVEL__ <= 1
-#  error Your version of gcc miscompiles the __weak directive
-# endif
-#endif
-
-#define __used			__attribute__((__used__))
-#define __must_check 		__attribute__((warn_unused_result))
-#define __compiler_offsetof(a,b) __builtin_offsetof(a,b)
-
-#if __GNUC_MINOR__ >= 3
-/* Mark functions as cold. gcc will assume any path leading to a call
-   to them will be unlikely.  This means a lot of manual unlikely()s
-   are unnecessary now for any paths leading to the usual suspects
-   like BUG(), printk(), panic() etc. [but let's keep them for now for
-   older compilers]
-
-   Early snapshots of gcc 4.3 don't support this and we can't detect this
-   in the preprocessor, but we can live with this because they're unreleased.
-   Maketime probing would be overkill here.
-
-   gcc also has a __attribute__((__hot__)) to move hot functions into
-   a special section, but I don't see any sense in this right now in
-   the kernel context */
-#define __cold			__attribute__((__cold__))
-
-#define __linktime_error(message) __attribute__((__error__(message)))
-
-#if __GNUC_MINOR__ >= 5
-/*
- * Mark a position in code as unreachable.  This can be used to
- * suppress control flow warnings after asm blocks that transfer
- * control elsewhere.
- *
- * Early snapshots of gcc 4.5 don't support this and we can't detect
- * this in the preprocessor, but we can live with this because they're
- * unreleased.  Really, we need to have autoconf for the kernel.
- */
-#define unreachable() __builtin_unreachable()
-
-/* Mark a function definition as prohibited from being cloned. */
-#define __noclone	__attribute__((__noclone__))
-
-#endif
-#endif
-
-#if __GNUC_MINOR__ > 0
-#define __compiletime_object_size(obj) __builtin_object_size(obj, 0)
-#endif
-#if __GNUC_MINOR__ >= 4 && !defined(__CHECKER__)
-#define __compiletime_warning(message) __attribute__((warning(message)))
-#define __compiletime_error(message) __attribute__((error(message)))
-#endif
diff --git a/ANDROID_3.4.5/include/linux/compiler-intel.h b/ANDROID_3.4.5/include/linux/compiler-intel.h
deleted file mode 100644
index d8e636e5..00000000
--- a/ANDROID_3.4.5/include/linux/compiler-intel.h
+++ /dev/null
@@ -1,31 +0,0 @@
-#ifndef __LINUX_COMPILER_H
-#error "Please don't include <linux/compiler-intel.h> directly, include <linux/compiler.h> instead."
-#endif
-
-#ifdef __ECC
-
-/* Some compiler specific definitions are overwritten here
- * for Intel ECC compiler
- */
-
-#include <asm/intrinsics.h>
-
-/* Intel ECC compiler doesn't support gcc specific asm stmts.
- * It uses intrinsics to do the equivalent things.
- */
-#undef barrier
-#undef RELOC_HIDE
-
-#define barrier() __memory_barrier()
-
-#define RELOC_HIDE(ptr, off)					\
-  ({ unsigned long __ptr;					\
-     __ptr = (unsigned long) (ptr);				\
-    (typeof(ptr)) (__ptr + (off)); })
-
-/* Intel ECC compiler doesn't support __builtin_types_compatible_p() */
-#define __must_be_array(a) 0
-
-#endif
-
-#define uninitialized_var(x) x
diff --git a/ANDROID_3.4.5/include/linux/compiler.h b/ANDROID_3.4.5/include/linux/compiler.h
deleted file mode 100644
index 923d093c..00000000
--- a/ANDROID_3.4.5/include/linux/compiler.h
+++ /dev/null
@@ -1,313 +0,0 @@
-#ifndef __LINUX_COMPILER_H
-#define __LINUX_COMPILER_H
-
-#ifndef __ASSEMBLY__
-
-#ifdef __CHECKER__
-# define __user		__attribute__((noderef, address_space(1)))
-# define __kernel	__attribute__((address_space(0)))
-# define __safe		__attribute__((safe))
-# define __force	__attribute__((force))
-# define __nocast	__attribute__((nocast))
-# define __iomem	__attribute__((noderef, address_space(2)))
-# define __acquires(x)	__attribute__((context(x,0,1)))
-# define __releases(x)	__attribute__((context(x,1,0)))
-# define __acquire(x)	__context__(x,1)
-# define __release(x)	__context__(x,-1)
-# define __cond_lock(x,c)	((c) ? ({ __acquire(x); 1; }) : 0)
-# define __percpu	__attribute__((noderef, address_space(3)))
-#ifdef CONFIG_SPARSE_RCU_POINTER
-# define __rcu		__attribute__((noderef, address_space(4)))
-#else
-# define __rcu
-#endif
-extern void __chk_user_ptr(const volatile void __user *);
-extern void __chk_io_ptr(const volatile void __iomem *);
-#else
-# define __user
-# define __kernel
-# define __safe
-# define __force
-# define __nocast
-# define __iomem
-# define __chk_user_ptr(x) (void)0
-# define __chk_io_ptr(x) (void)0
-# define __builtin_warning(x, y...) (1)
-# define __acquires(x)
-# define __releases(x)
-# define __acquire(x) (void)0
-# define __release(x) (void)0
-# define __cond_lock(x,c) (c)
-# define __percpu
-# define __rcu
-#endif
-
-#ifdef __KERNEL__
-
-#ifdef __GNUC__
-#include <linux/compiler-gcc.h>
-#endif
-
-#define notrace __attribute__((no_instrument_function))
-
-/* Intel compiler defines __GNUC__. So we will overwrite implementations
- * coming from above header files here
- */
-#ifdef __INTEL_COMPILER
-# include <linux/compiler-intel.h>
-#endif
-
-/*
- * Generic compiler-dependent macros required for kernel
- * build go below this comment. Actual compiler/compiler version
- * specific implementations come from the above header files
- */
-
-struct ftrace_branch_data {
-	const char *func;
-	const char *file;
-	unsigned line;
-	union {
-		struct {
-			unsigned long correct;
-			unsigned long incorrect;
-		};
-		struct {
-			unsigned long miss;
-			unsigned long hit;
-		};
-		unsigned long miss_hit[2];
-	};
-};
-
-/*
- * Note: DISABLE_BRANCH_PROFILING can be used by special lowlevel code
- * to disable branch tracing on a per file basis.
- */
-#if defined(CONFIG_TRACE_BRANCH_PROFILING) \
-    && !defined(DISABLE_BRANCH_PROFILING) && !defined(__CHECKER__)
-void ftrace_likely_update(struct ftrace_branch_data *f, int val, int expect);
-
-#define likely_notrace(x)	__builtin_expect(!!(x), 1)
-#define unlikely_notrace(x)	__builtin_expect(!!(x), 0)
-
-#define __branch_check__(x, expect) ({					\
-			int ______r;					\
-			static struct ftrace_branch_data		\
-				__attribute__((__aligned__(4)))		\
-				__attribute__((section("_ftrace_annotated_branch"))) \
-				______f = {				\
-				.func = __func__,			\
-				.file = __FILE__,			\
-				.line = __LINE__,			\
-			};						\
-			______r = likely_notrace(x);			\
-			ftrace_likely_update(&______f, ______r, expect); \
-			______r;					\
-		})
-
-/*
- * Using __builtin_constant_p(x) to ignore cases where the return
- * value is always the same.  This idea is taken from a similar patch
- * written by Daniel Walker.
- */
-# ifndef likely
-#  define likely(x)	(__builtin_constant_p(x) ? !!(x) : __branch_check__(x, 1))
-# endif
-# ifndef unlikely
-#  define unlikely(x)	(__builtin_constant_p(x) ? !!(x) : __branch_check__(x, 0))
-# endif
-
-#ifdef CONFIG_PROFILE_ALL_BRANCHES
-/*
- * "Define 'is'", Bill Clinton
- * "Define 'if'", Steven Rostedt
- */
-#define if(cond, ...) __trace_if( (cond , ## __VA_ARGS__) )
-#define __trace_if(cond) \
-	if (__builtin_constant_p((cond)) ? !!(cond) :			\
-	({								\
-		int ______r;						\
-		static struct ftrace_branch_data			\
-			__attribute__((__aligned__(4)))			\
-			__attribute__((section("_ftrace_branch")))	\
-			______f = {					\
-				.func = __func__,			\
-				.file = __FILE__,			\
-				.line = __LINE__,			\
-			};						\
-		______r = !!(cond);					\
-		______f.miss_hit[______r]++;					\
-		______r;						\
-	}))
-#endif /* CONFIG_PROFILE_ALL_BRANCHES */
-
-#else
-# define likely(x)	__builtin_expect(!!(x), 1)
-# define unlikely(x)	__builtin_expect(!!(x), 0)
-#endif
-
-/* Optimization barrier */
-#ifndef barrier
-# define barrier() __memory_barrier()
-#endif
-
-/* Unreachable code */
-#ifndef unreachable
-# define unreachable() do { } while (1)
-#endif
-
-#ifndef RELOC_HIDE
-# define RELOC_HIDE(ptr, off)					\
-  ({ unsigned long __ptr;					\
-     __ptr = (unsigned long) (ptr);				\
-    (typeof(ptr)) (__ptr + (off)); })
-#endif
-
-#endif /* __KERNEL__ */
-
-#endif /* __ASSEMBLY__ */
-
-#ifdef __KERNEL__
-/*
- * Allow us to mark functions as 'deprecated' and have gcc emit a nice
- * warning for each use, in hopes of speeding the functions removal.
- * Usage is:
- * 		int __deprecated foo(void)
- */
-#ifndef __deprecated
-# define __deprecated		/* unimplemented */
-#endif
-
-#ifdef MODULE
-#define __deprecated_for_modules __deprecated
-#else
-#define __deprecated_for_modules
-#endif
-
-#ifndef __must_check
-#define __must_check
-#endif
-
-#ifndef CONFIG_ENABLE_MUST_CHECK
-#undef __must_check
-#define __must_check
-#endif
-#ifndef CONFIG_ENABLE_WARN_DEPRECATED
-#undef __deprecated
-#undef __deprecated_for_modules
-#define __deprecated
-#define __deprecated_for_modules
-#endif
-
-/*
- * Allow us to avoid 'defined but not used' warnings on functions and data,
- * as well as force them to be emitted to the assembly file.
- *
- * As of gcc 3.4, static functions that are not marked with attribute((used))
- * may be elided from the assembly file.  As of gcc 3.4, static data not so
- * marked will not be elided, but this may change in a future gcc version.
- *
- * NOTE: Because distributions shipped with a backported unit-at-a-time
- * compiler in gcc 3.3, we must define __used to be __attribute__((used))
- * for gcc >=3.3 instead of 3.4.
- *
- * In prior versions of gcc, such functions and data would be emitted, but
- * would be warned about except with attribute((unused)).
- *
- * Mark functions that are referenced only in inline assembly as __used so
- * the code is emitted even though it appears to be unreferenced.
- */
-#ifndef __used
-# define __used			/* unimplemented */
-#endif
-
-#ifndef __maybe_unused
-# define __maybe_unused		/* unimplemented */
-#endif
-
-#ifndef __always_unused
-# define __always_unused	/* unimplemented */
-#endif
-
-#ifndef noinline
-#define noinline
-#endif
-
-/*
- * Rather then using noinline to prevent stack consumption, use
- * noinline_for_stack instead.  For documentation reasons.
- */
-#define noinline_for_stack noinline
-
-#ifndef __always_inline
-#define __always_inline inline
-#endif
-
-#endif /* __KERNEL__ */
-
-/*
- * From the GCC manual:
- *
- * Many functions do not examine any values except their arguments,
- * and have no effects except the return value.  Basically this is
- * just slightly more strict class than the `pure' attribute above,
- * since function is not allowed to read global memory.
- *
- * Note that a function that has pointer arguments and examines the
- * data pointed to must _not_ be declared `const'.  Likewise, a
- * function that calls a non-`const' function usually must not be
- * `const'.  It does not make sense for a `const' function to return
- * `void'.
- */
-#ifndef __attribute_const__
-# define __attribute_const__	/* unimplemented */
-#endif
-
-/*
- * Tell gcc if a function is cold. The compiler will assume any path
- * directly leading to the call is unlikely.
- */
-
-#ifndef __cold
-#define __cold
-#endif
-
-/* Simple shorthand for a section definition */
-#ifndef __section
-# define __section(S) __attribute__ ((__section__(#S)))
-#endif
-
-/* Are two types/vars the same type (ignoring qualifiers)? */
-#ifndef __same_type
-# define __same_type(a, b) __builtin_types_compatible_p(typeof(a), typeof(b))
-#endif
-
-/* Compile time object size, -1 for unknown */
-#ifndef __compiletime_object_size
-# define __compiletime_object_size(obj) -1
-#endif
-#ifndef __compiletime_warning
-# define __compiletime_warning(message)
-#endif
-#ifndef __compiletime_error
-# define __compiletime_error(message)
-#endif
-#ifndef __linktime_error
-# define __linktime_error(message)
-#endif
-/*
- * Prevent the compiler from merging or refetching accesses.  The compiler
- * is also forbidden from reordering successive instances of ACCESS_ONCE(),
- * but only when the compiler is aware of some particular ordering.  One way
- * to make the compiler aware of ordering is to put the two invocations of
- * ACCESS_ONCE() in different C statements.
- *
- * This macro does absolutely -nothing- to prevent the CPU from reordering,
- * merging, or refetching absolutely anything at any time.  Its main intended
- * use is to mediate communication between process-level code and irq/NMI
- * handlers, all running on the same CPU.
- */
-#define ACCESS_ONCE(x) (*(volatile typeof(x) *)&(x))
-
-#endif /* __LINUX_COMPILER_H */
diff --git a/ANDROID_3.4.5/include/linux/completion.h b/ANDROID_3.4.5/include/linux/completion.h
deleted file mode 100644
index 51494e6b..00000000
--- a/ANDROID_3.4.5/include/linux/completion.h
+++ /dev/null
@@ -1,104 +0,0 @@
-#ifndef __LINUX_COMPLETION_H
-#define __LINUX_COMPLETION_H
-
-/*
- * (C) Copyright 2001 Linus Torvalds
- *
- * Atomic wait-for-completion handler data structures.
- * See kernel/sched.c for details.
- */
-
-#include <linux/wait.h>
-
-/*
- * struct completion - structure used to maintain state for a "completion"
- *
- * This is the opaque structure used to maintain the state for a "completion".
- * Completions currently use a FIFO to queue threads that have to wait for
- * the "completion" event.
- *
- * See also:  complete(), wait_for_completion() (and friends _timeout,
- * _interruptible, _interruptible_timeout, and _killable), init_completion(),
- * and macros DECLARE_COMPLETION(), DECLARE_COMPLETION_ONSTACK(), and
- * INIT_COMPLETION().
- */
-struct completion {
-	unsigned int done;
-	wait_queue_head_t wait;
-};
-
-#define COMPLETION_INITIALIZER(work) \
-	{ 0, __WAIT_QUEUE_HEAD_INITIALIZER((work).wait) }
-
-#define COMPLETION_INITIALIZER_ONSTACK(work) \
-	({ init_completion(&work); work; })
-
-/**
- * DECLARE_COMPLETION - declare and initialize a completion structure
- * @work:  identifier for the completion structure
- *
- * This macro declares and initializes a completion structure. Generally used
- * for static declarations. You should use the _ONSTACK variant for automatic
- * variables.
- */
-#define DECLARE_COMPLETION(work) \
-	struct completion work = COMPLETION_INITIALIZER(work)
-
-/*
- * Lockdep needs to run a non-constant initializer for on-stack
- * completions - so we use the _ONSTACK() variant for those that
- * are on the kernel stack:
- */
-/**
- * DECLARE_COMPLETION_ONSTACK - declare and initialize a completion structure
- * @work:  identifier for the completion structure
- *
- * This macro declares and initializes a completion structure on the kernel
- * stack.
- */
-#ifdef CONFIG_LOCKDEP
-# define DECLARE_COMPLETION_ONSTACK(work) \
-	struct completion work = COMPLETION_INITIALIZER_ONSTACK(work)
-#else
-# define DECLARE_COMPLETION_ONSTACK(work) DECLARE_COMPLETION(work)
-#endif
-
-/**
- * init_completion - Initialize a dynamically allocated completion
- * @x:  completion structure that is to be initialized
- *
- * This inline function will initialize a dynamically created completion
- * structure.
- */
-static inline void init_completion(struct completion *x)
-{
-	x->done = 0;
-	init_waitqueue_head(&x->wait);
-}
-
-extern void wait_for_completion(struct completion *);
-extern int wait_for_completion_interruptible(struct completion *x);
-extern int wait_for_completion_killable(struct completion *x);
-extern unsigned long wait_for_completion_timeout(struct completion *x,
-						   unsigned long timeout);
-extern long wait_for_completion_interruptible_timeout(
-	struct completion *x, unsigned long timeout);
-extern long wait_for_completion_killable_timeout(
-	struct completion *x, unsigned long timeout);
-extern bool try_wait_for_completion(struct completion *x);
-extern bool completion_done(struct completion *x);
-
-extern void complete(struct completion *);
-extern void complete_all(struct completion *);
-
-/**
- * INIT_COMPLETION - reinitialize a completion structure
- * @x:  completion structure to be reinitialized
- *
- * This macro should be used to reinitialize a completion structure so it can
- * be reused. This is especially important after complete_all() is used.
- */
-#define INIT_COMPLETION(x)	((x).done = 0)
-
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/comstats.h b/ANDROID_3.4.5/include/linux/comstats.h
deleted file mode 100644
index 3f5ea8e8..00000000
--- a/ANDROID_3.4.5/include/linux/comstats.h
+++ /dev/null
@@ -1,119 +0,0 @@
-/*****************************************************************************/
-
-/*
- *	comstats.h  -- Serial Port Stats.
- *
- *	Copyright (C) 1996-1998  Stallion Technologies
- *	Copyright (C) 1994-1996  Greg Ungerer.
- *
- *	This program is free software; you can redistribute it and/or modify
- *	it under the terms of the GNU General Public License as published by
- *	the Free Software Foundation; either version 2 of the License, or
- *	(at your option) any later version.
- *
- *	This program is distributed in the hope that it will be useful,
- *	but WITHOUT ANY WARRANTY; without even the implied warranty of
- *	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *	GNU General Public License for more details.
- *
- *	You should have received a copy of the GNU General Public License
- *	along with this program; if not, write to the Free Software
- *	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-/*****************************************************************************/
-#ifndef	_COMSTATS_H
-#define	_COMSTATS_H
-/*****************************************************************************/
-
-/*
- *	Serial port stats structure. The structure itself is UART
- *	independent, but some fields may be UART/driver specific (for
- *	example state).
- */
-
-typedef struct {
-	unsigned long	brd;
-	unsigned long	panel;
-	unsigned long	port;
-	unsigned long	hwid;
-	unsigned long	type;
-	unsigned long	txtotal;
-	unsigned long	rxtotal;
-	unsigned long	txbuffered;
-	unsigned long	rxbuffered;
-	unsigned long	rxoverrun;
-	unsigned long	rxparity;
-	unsigned long	rxframing;
-	unsigned long	rxlost;
-	unsigned long	txbreaks;
-	unsigned long	rxbreaks;
-	unsigned long	txxon;
-	unsigned long	txxoff;
-	unsigned long	rxxon;
-	unsigned long	rxxoff;
-	unsigned long	txctson;
-	unsigned long	txctsoff;
-	unsigned long	rxrtson;
-	unsigned long	rxrtsoff;
-	unsigned long	modem;
-	unsigned long	state;
-	unsigned long	flags;
-	unsigned long	ttystate;
-	unsigned long	cflags;
-	unsigned long	iflags;
-	unsigned long	oflags;
-	unsigned long	lflags;
-	unsigned long	signals;
-} comstats_t;
-
-
-/*
- *	Board stats structure. Returns useful info about the board.
- */
-
-#define	COM_MAXPANELS	8
-
-typedef struct {
-	unsigned long	panel;
-	unsigned long	type;
-	unsigned long	hwid;
-	unsigned long	nrports;
-} companel_t;
-
-typedef struct {
-	unsigned long	brd;
-	unsigned long	type;
-	unsigned long	hwid;
-	unsigned long	state;
-	unsigned long	ioaddr;
-	unsigned long	ioaddr2;
-	unsigned long	memaddr;
-	unsigned long	irq;
-	unsigned long	nrpanels;
-	unsigned long	nrports;
-	companel_t	panels[COM_MAXPANELS];
-} combrd_t;
-
-
-/*
- *	Define the ioctl operations for stats stuff.
- */
-#include <linux/ioctl.h>
-
-#define	COM_GETPORTSTATS	_IO('c',30)
-#define	COM_CLRPORTSTATS	_IO('c',31)
-#define	COM_GETBRDSTATS		_IO('c',32)
-
-
-/*
- *	Define the set of ioctls that give user level access to the
- *	private port, panel and board structures. The argument required
- *	will be driver dependent!  
- */
-#define	COM_READPORT		_IO('c',40)
-#define	COM_READBOARD		_IO('c',41)
-#define	COM_READPANEL		_IO('c',42)
-
-/*****************************************************************************/
-#endif
diff --git a/ANDROID_3.4.5/include/linux/concap.h b/ANDROID_3.4.5/include/linux/concap.h
deleted file mode 100644
index 977acb3d..00000000
--- a/ANDROID_3.4.5/include/linux/concap.h
+++ /dev/null
@@ -1,112 +0,0 @@
-/* $Id: concap.h,v 1.3.2.2 2004/01/12 23:08:35 keil Exp $
- *
- * Copyright 1997 by Henner Eisen <eis@baty.hanse.de>
- *
- * This software may be used and distributed according to the terms
- * of the GNU General Public License, incorporated herein by reference.
- */
-
-#ifndef _LINUX_CONCAP_H
-#define _LINUX_CONCAP_H
-
-#include <linux/skbuff.h>
-#include <linux/netdevice.h>
-
-/* Stuff to support encapsulation protocols genericly. The encapsulation
-   protocol is processed at the uppermost layer of the network interface.
-
-   Based on a ideas developed in a 'synchronous device' thread in the
-   linux-x25 mailing list contributed by Alan Cox, Thomasz Motylewski
-   and Jonathan Naylor.
-
-   For more documetation on this refer to Documentation/isdn/README.concap
-*/
-
-struct concap_proto_ops;
-struct concap_device_ops;
-
-/* this manages all data needed by the encapsulation protocol
- */
-struct concap_proto{
-	struct net_device *net_dev;	/* net device using our service  */
-	struct concap_device_ops *dops;	/* callbacks provided by device */
- 	struct concap_proto_ops  *pops;	/* callbacks provided by us */
- 	spinlock_t lock;
-	int flags;
-	void *proto_data;		/* protocol specific private data, to
-					   be accessed via *pops methods only*/
-	/*
-	  :
-	  whatever 
-	  :
-	  */
-};
-
-/* Operations to be supported by the net device. Called by the encapsulation
- * protocol entity. No receive method is offered because the encapsulation
- * protocol directly calls netif_rx().
- */
-struct concap_device_ops{
-
-	/* to request data is submitted by device*/ 
-	int (*data_req)(struct concap_proto *, struct sk_buff *);
-
-	/* Control methods must be set to NULL by devices which do not
-	   support connection control.*/
-	/* to request a connection is set up */ 
-	int (*connect_req)(struct concap_proto *);
-
-	/* to request a connection is released */
-	int (*disconn_req)(struct concap_proto *);	
-};
-
-/* Operations to be supported by the encapsulation protocol. Called by
- * device driver.
- */
-struct concap_proto_ops{
-
-	/* create a new encapsulation protocol instance of same type */
-	struct concap_proto *  (*proto_new) (void);
-
-	/* delete encapsulation protocol instance and free all its resources.
-	   cprot may no loger be referenced after calling this */
-	void (*proto_del)(struct concap_proto *cprot);
-
-	/* initialize the protocol's data. To be called at interface startup
-	   or when the device driver resets the interface. All services of the
-	   encapsulation protocol may be used after this*/
-	int (*restart)(struct concap_proto *cprot, 
-		       struct net_device *ndev,
-		       struct concap_device_ops *dops);
-
-	/* inactivate an encapsulation protocol instance. The encapsulation
-	   protocol may not call any *dops methods after this. */
-	int (*close)(struct concap_proto *cprot);
-
-	/* process a frame handed down to us by upper layer */
-	int (*encap_and_xmit)(struct concap_proto *cprot, struct sk_buff *skb);
-
-	/* to be called for each data entity received from lower layer*/ 
-	int (*data_ind)(struct concap_proto *cprot, struct sk_buff *skb);
-
-	/* to be called when a connection was set up/down.
-	   Protocols that don't process these primitives might fill in
-	   dummy methods here */
-	int (*connect_ind)(struct concap_proto *cprot);
-	int (*disconn_ind)(struct concap_proto *cprot);
-  /*
-    Some network device support functions, like net_header(), rebuild_header(),
-    and others, that depend solely on the encapsulation protocol, might
-    be provided here, too. The net device would just fill them in its
-    corresponding fields when it is opened.
-    */
-};
-
-/* dummy restart/close/connect/reset/disconn methods
- */
-extern int concap_nop(struct concap_proto *cprot); 
-
-/* dummy submit method
- */
-extern int concap_drop_skb(struct concap_proto *cprot, struct sk_buff *skb);
-#endif
diff --git a/ANDROID_3.4.5/include/linux/configfs.h b/ANDROID_3.4.5/include/linux/configfs.h
deleted file mode 100644
index 34025df6..00000000
--- a/ANDROID_3.4.5/include/linux/configfs.h
+++ /dev/null
@@ -1,260 +0,0 @@
-/* -*- mode: c; c-basic-offset: 8; -*-
- * vim: noexpandtab sw=8 ts=8 sts=0:
- *
- * configfs.h - definitions for the device driver filesystem
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public
- * License as published by the Free Software Foundation; either
- * version 2 of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public
- * License along with this program; if not, write to the
- * Free Software Foundation, Inc., 59 Temple Place - Suite 330,
- * Boston, MA 021110-1307, USA.
- *
- * Based on sysfs:
- * 	sysfs is Copyright (C) 2001, 2002, 2003 Patrick Mochel
- *
- * Based on kobject.h:
- *      Copyright (c) 2002-2003	Patrick Mochel
- *      Copyright (c) 2002-2003	Open Source Development Labs
- *
- * configfs Copyright (C) 2005 Oracle.  All rights reserved.
- *
- * Please read Documentation/filesystems/configfs/configfs.txt before using
- * the configfs interface, ESPECIALLY the parts about reference counts and
- * item destructors.
- */
-
-#ifndef _CONFIGFS_H_
-#define _CONFIGFS_H_
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/list.h>
-#include <linux/kref.h>
-#include <linux/mutex.h>
-#include <linux/err.h>
-
-#include <linux/atomic.h>
-
-#define CONFIGFS_ITEM_NAME_LEN	20
-
-struct module;
-
-struct configfs_item_operations;
-struct configfs_group_operations;
-struct configfs_attribute;
-struct configfs_subsystem;
-
-struct config_item {
-	char			*ci_name;
-	char			ci_namebuf[CONFIGFS_ITEM_NAME_LEN];
-	struct kref		ci_kref;
-	struct list_head	ci_entry;
-	struct config_item	*ci_parent;
-	struct config_group	*ci_group;
-	struct config_item_type	*ci_type;
-	struct dentry		*ci_dentry;
-};
-
-extern int config_item_set_name(struct config_item *, const char *, ...);
-
-static inline char *config_item_name(struct config_item * item)
-{
-	return item->ci_name;
-}
-
-extern void config_item_init(struct config_item *);
-extern void config_item_init_type_name(struct config_item *item,
-				       const char *name,
-				       struct config_item_type *type);
-
-extern struct config_item * config_item_get(struct config_item *);
-extern void config_item_put(struct config_item *);
-
-struct config_item_type {
-	struct module				*ct_owner;
-	struct configfs_item_operations		*ct_item_ops;
-	struct configfs_group_operations	*ct_group_ops;
-	struct configfs_attribute		**ct_attrs;
-};
-
-/**
- *	group - a group of config_items of a specific type, belonging
- *	to a specific subsystem.
- */
-struct config_group {
-	struct config_item		cg_item;
-	struct list_head		cg_children;
-	struct configfs_subsystem 	*cg_subsys;
-	struct config_group		**default_groups;
-};
-
-extern void config_group_init(struct config_group *group);
-extern void config_group_init_type_name(struct config_group *group,
-					const char *name,
-					struct config_item_type *type);
-
-static inline struct config_group *to_config_group(struct config_item *item)
-{
-	return item ? container_of(item,struct config_group,cg_item) : NULL;
-}
-
-static inline struct config_group *config_group_get(struct config_group *group)
-{
-	return group ? to_config_group(config_item_get(&group->cg_item)) : NULL;
-}
-
-static inline void config_group_put(struct config_group *group)
-{
-	config_item_put(&group->cg_item);
-}
-
-extern struct config_item *config_group_find_item(struct config_group *,
-						  const char *);
-
-
-struct configfs_attribute {
-	const char		*ca_name;
-	struct module 		*ca_owner;
-	umode_t			ca_mode;
-};
-
-/*
- * Users often need to create attribute structures for their configurable
- * attributes, containing a configfs_attribute member and function pointers
- * for the show() and store() operations on that attribute. If they don't
- * need anything else on the extended attribute structure, they can use
- * this macro to define it  The argument _item is the name of the
- * config_item structure.
- */
-#define CONFIGFS_ATTR_STRUCT(_item)					\
-struct _item##_attribute {						\
-	struct configfs_attribute attr;					\
-	ssize_t (*show)(struct _item *, char *);			\
-	ssize_t (*store)(struct _item *, const char *, size_t);		\
-}
-
-/*
- * With the extended attribute structure, users can use this macro
- * (similar to sysfs' __ATTR) to make defining attributes easier.
- * An example:
- * #define MYITEM_ATTR(_name, _mode, _show, _store)	\
- * struct myitem_attribute childless_attr_##_name =	\
- *         __CONFIGFS_ATTR(_name, _mode, _show, _store)
- */
-#define __CONFIGFS_ATTR(_name, _mode, _show, _store)			\
-{									\
-	.attr	= {							\
-			.ca_name = __stringify(_name),			\
-			.ca_mode = _mode,				\
-			.ca_owner = THIS_MODULE,			\
-	},								\
-	.show	= _show,						\
-	.store	= _store,						\
-}
-/* Here is a readonly version, only requiring a show() operation */
-#define __CONFIGFS_ATTR_RO(_name, _show)				\
-{									\
-	.attr	= {							\
-			.ca_name = __stringify(_name),			\
-			.ca_mode = 0444,				\
-			.ca_owner = THIS_MODULE,			\
-	},								\
-	.show	= _show,						\
-}
-
-/*
- * With these extended attributes, the simple show_attribute() and
- * store_attribute() operations need to call the show() and store() of the
- * attributes.  This is a common pattern, so we provide a macro to define
- * them.  The argument _item is the name of the config_item structure.
- * This macro expects the attributes to be named "struct <name>_attribute"
- * and the function to_<name>() to exist;
- */
-#define CONFIGFS_ATTR_OPS(_item)					\
-static ssize_t _item##_attr_show(struct config_item *item,		\
-				 struct configfs_attribute *attr,	\
-				 char *page)				\
-{									\
-	struct _item *_item = to_##_item(item);				\
-	struct _item##_attribute *_item##_attr =			\
-		container_of(attr, struct _item##_attribute, attr);	\
-	ssize_t ret = 0;						\
-									\
-	if (_item##_attr->show)						\
-		ret = _item##_attr->show(_item, page);			\
-	return ret;							\
-}									\
-static ssize_t _item##_attr_store(struct config_item *item,		\
-				  struct configfs_attribute *attr,	\
-				  const char *page, size_t count)	\
-{									\
-	struct _item *_item = to_##_item(item);				\
-	struct _item##_attribute *_item##_attr =			\
-		container_of(attr, struct _item##_attribute, attr);	\
-	ssize_t ret = -EINVAL;						\
-									\
-	if (_item##_attr->store)					\
-		ret = _item##_attr->store(_item, page, count);		\
-	return ret;							\
-}
-
-/*
- * If allow_link() exists, the item can symlink(2) out to other
- * items.  If the item is a group, it may support mkdir(2).
- * Groups supply one of make_group() and make_item().  If the
- * group supports make_group(), one can create group children.  If it
- * supports make_item(), one can create config_item children.  make_group()
- * and make_item() return ERR_PTR() on errors.  If it has
- * default_groups on group->default_groups, it has automatically created
- * group children.  default_groups may coexist alongsize make_group() or
- * make_item(), but if the group wishes to have only default_groups
- * children (disallowing mkdir(2)), it need not provide either function.
- * If the group has commit(), it supports pending and committed (active)
- * items.
- */
-struct configfs_item_operations {
-	void (*release)(struct config_item *);
-	ssize_t	(*show_attribute)(struct config_item *, struct configfs_attribute *,char *);
-	ssize_t	(*store_attribute)(struct config_item *,struct configfs_attribute *,const char *, size_t);
-	int (*allow_link)(struct config_item *src, struct config_item *target);
-	int (*drop_link)(struct config_item *src, struct config_item *target);
-};
-
-struct configfs_group_operations {
-	struct config_item *(*make_item)(struct config_group *group, const char *name);
-	struct config_group *(*make_group)(struct config_group *group, const char *name);
-	int (*commit_item)(struct config_item *item);
-	void (*disconnect_notify)(struct config_group *group, struct config_item *item);
-	void (*drop_item)(struct config_group *group, struct config_item *item);
-};
-
-struct configfs_subsystem {
-	struct config_group	su_group;
-	struct mutex		su_mutex;
-};
-
-static inline struct configfs_subsystem *to_configfs_subsystem(struct config_group *group)
-{
-	return group ?
-		container_of(group, struct configfs_subsystem, su_group) :
-		NULL;
-}
-
-int configfs_register_subsystem(struct configfs_subsystem *subsys);
-void configfs_unregister_subsystem(struct configfs_subsystem *subsys);
-
-/* These functions can sleep and can alloc with GFP_KERNEL */
-/* WARNING: These cannot be called underneath configfs callbacks!! */
-int configfs_depend_item(struct configfs_subsystem *subsys, struct config_item *target);
-void configfs_undepend_item(struct configfs_subsystem *subsys, struct config_item *target);
-
-#endif /* _CONFIGFS_H_ */
diff --git a/ANDROID_3.4.5/include/linux/connector.h b/ANDROID_3.4.5/include/linux/connector.h
deleted file mode 100644
index 76384074..00000000
--- a/ANDROID_3.4.5/include/linux/connector.h
+++ /dev/null
@@ -1,141 +0,0 @@
-/*
- * 	connector.h
- * 
- * 2004-2005 Copyright (c) Evgeniy Polyakov <zbr@ioremap.net>
- * All rights reserved.
- * 
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __CONNECTOR_H
-#define __CONNECTOR_H
-
-#include <linux/types.h>
-
-/*
- * Process Events connector unique ids -- used for message routing
- */
-#define CN_IDX_PROC			0x1
-#define CN_VAL_PROC			0x1
-#define CN_IDX_CIFS			0x2
-#define CN_VAL_CIFS                     0x1
-#define CN_W1_IDX			0x3	/* w1 communication */
-#define CN_W1_VAL			0x1
-#define CN_IDX_V86D			0x4
-#define CN_VAL_V86D_UVESAFB		0x1
-#define CN_IDX_BB			0x5	/* BlackBoard, from the TSP GPL sampling framework */
-#define CN_DST_IDX			0x6
-#define CN_DST_VAL			0x1
-#define CN_IDX_DM			0x7	/* Device Mapper */
-#define CN_VAL_DM_USERSPACE_LOG		0x1
-#define CN_IDX_DRBD			0x8
-#define CN_VAL_DRBD			0x1
-#define CN_KVP_IDX			0x9	/* HyperV KVP */
-#define CN_KVP_VAL			0x1	/* queries from the kernel */
-
-#define CN_NETLINK_USERS		10	/* Highest index + 1 */
-
-/*
- * Maximum connector's message size.
- */
-#define CONNECTOR_MAX_MSG_SIZE		16384
-
-/*
- * idx and val are unique identifiers which 
- * are used for message routing and 
- * must be registered in connector.h for in-kernel usage.
- */
-
-struct cb_id {
-	__u32 idx;
-	__u32 val;
-};
-
-struct cn_msg {
-	struct cb_id id;
-
-	__u32 seq;
-	__u32 ack;
-
-	__u16 len;		/* Length of the following data */
-	__u16 flags;
-	__u8 data[0];
-};
-
-#ifdef __KERNEL__
-
-#include <linux/atomic.h>
-
-#include <linux/list.h>
-#include <linux/workqueue.h>
-
-#include <net/sock.h>
-
-#define CN_CBQ_NAMELEN		32
-
-struct cn_queue_dev {
-	atomic_t refcnt;
-	unsigned char name[CN_CBQ_NAMELEN];
-
-	struct list_head queue_list;
-	spinlock_t queue_lock;
-
-	struct sock *nls;
-};
-
-struct cn_callback_id {
-	unsigned char name[CN_CBQ_NAMELEN];
-	struct cb_id id;
-};
-
-struct cn_callback_entry {
-	struct list_head callback_entry;
-	atomic_t refcnt;
-	struct cn_queue_dev *pdev;
-
-	struct cn_callback_id id;
-	void (*callback) (struct cn_msg *, struct netlink_skb_parms *);
-
-	u32 seq, group;
-};
-
-struct cn_dev {
-	struct cb_id id;
-
-	u32 seq, groups;
-	struct sock *nls;
-	void (*input) (struct sk_buff *skb);
-
-	struct cn_queue_dev *cbdev;
-};
-
-int cn_add_callback(struct cb_id *id, const char *name,
-		    void (*callback)(struct cn_msg *, struct netlink_skb_parms *));
-void cn_del_callback(struct cb_id *);
-int cn_netlink_send(struct cn_msg *, u32, gfp_t);
-
-int cn_queue_add_callback(struct cn_queue_dev *dev, const char *name,
-			  struct cb_id *id,
-			  void (*callback)(struct cn_msg *, struct netlink_skb_parms *));
-void cn_queue_del_callback(struct cn_queue_dev *dev, struct cb_id *id);
-void cn_queue_release_callback(struct cn_callback_entry *);
-
-struct cn_queue_dev *cn_queue_alloc_dev(const char *name, struct sock *);
-void cn_queue_free_dev(struct cn_queue_dev *dev);
-
-int cn_cb_equal(struct cb_id *, struct cb_id *);
-
-#endif				/* __KERNEL__ */
-#endif				/* __CONNECTOR_H */
diff --git a/ANDROID_3.4.5/include/linux/console.h b/ANDROID_3.4.5/include/linux/console.h
deleted file mode 100644
index 7201ce42..00000000
--- a/ANDROID_3.4.5/include/linux/console.h
+++ /dev/null
@@ -1,184 +0,0 @@
-/*
- *  linux/include/linux/console.h
- *
- *  Copyright (C) 1993        Hamish Macdonald
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file COPYING in the main directory of this archive
- * for more details.
- *
- * Changed:
- * 10-Mar-94: Arno Griffioen: Conversion for vt100 emulator port from PC LINUX
- */
-
-#ifndef _LINUX_CONSOLE_H_
-#define _LINUX_CONSOLE_H_ 1
-
-#include <linux/types.h>
-
-struct vc_data;
-struct console_font_op;
-struct console_font;
-struct module;
-struct tty_struct;
-
-/*
- * this is what the terminal answers to a ESC-Z or csi0c query.
- */
-#define VT100ID "\033[?1;2c"
-#define VT102ID "\033[?6c"
-
-struct consw {
-	struct module *owner;
-	const char *(*con_startup)(void);
-	void	(*con_init)(struct vc_data *, int);
-	void	(*con_deinit)(struct vc_data *);
-	void	(*con_clear)(struct vc_data *, int, int, int, int);
-	void	(*con_putc)(struct vc_data *, int, int, int);
-	void	(*con_putcs)(struct vc_data *, const unsigned short *, int, int, int);
-	void	(*con_cursor)(struct vc_data *, int);
-	int	(*con_scroll)(struct vc_data *, int, int, int, int);
-	void	(*con_bmove)(struct vc_data *, int, int, int, int, int, int);
-	int	(*con_switch)(struct vc_data *);
-	int	(*con_blank)(struct vc_data *, int, int);
-	int	(*con_font_set)(struct vc_data *, struct console_font *, unsigned);
-	int	(*con_font_get)(struct vc_data *, struct console_font *);
-	int	(*con_font_default)(struct vc_data *, struct console_font *, char *);
-	int	(*con_font_copy)(struct vc_data *, int);
-	int     (*con_resize)(struct vc_data *, unsigned int, unsigned int,
-			       unsigned int);
-	int	(*con_set_palette)(struct vc_data *, unsigned char *);
-	int	(*con_scrolldelta)(struct vc_data *, int);
-	int	(*con_set_origin)(struct vc_data *);
-	void	(*con_save_screen)(struct vc_data *);
-	u8	(*con_build_attr)(struct vc_data *, u8, u8, u8, u8, u8, u8);
-	void	(*con_invert_region)(struct vc_data *, u16 *, int);
-	u16    *(*con_screen_pos)(struct vc_data *, int);
-	unsigned long (*con_getxy)(struct vc_data *, unsigned long, int *, int *);
-	/*
-	 * Prepare the console for the debugger.  This includes, but is not
-	 * limited to, unblanking the console, loading an appropriate
-	 * palette, and allowing debugger generated output.
-	 */
-	int	(*con_debug_enter)(struct vc_data *);
-	/*
-	 * Restore the console to its pre-debug state as closely as possible.
-	 */
-	int	(*con_debug_leave)(struct vc_data *);
-};
-
-extern const struct consw *conswitchp;
-
-extern const struct consw dummy_con;	/* dummy console buffer */
-extern const struct consw vga_con;	/* VGA text console */
-extern const struct consw newport_con;	/* SGI Newport console  */
-extern const struct consw prom_con;	/* SPARC PROM console */
-
-int con_is_bound(const struct consw *csw);
-int register_con_driver(const struct consw *csw, int first, int last);
-int unregister_con_driver(const struct consw *csw);
-int take_over_console(const struct consw *sw, int first, int last, int deflt);
-void give_up_console(const struct consw *sw);
-#ifdef CONFIG_HW_CONSOLE
-int con_debug_enter(struct vc_data *vc);
-int con_debug_leave(void);
-#else
-#define con_debug_enter(vc) (0)
-#define con_debug_leave() (0)
-#endif
-
-/* scroll */
-#define SM_UP       (1)
-#define SM_DOWN     (2)
-
-/* cursor */
-#define CM_DRAW     (1)
-#define CM_ERASE    (2)
-#define CM_MOVE     (3)
-
-/*
- * The interface for a console, or any other device that wants to capture
- * console messages (printer driver?)
- *
- * If a console driver is marked CON_BOOT then it will be auto-unregistered
- * when the first real console is registered.  This is for early-printk drivers.
- */
-
-#define CON_PRINTBUFFER	(1)
-#define CON_CONSDEV	(2) /* Last on the command line */
-#define CON_ENABLED	(4)
-#define CON_BOOT	(8)
-#define CON_ANYTIME	(16) /* Safe to call when cpu is offline */
-#define CON_BRL		(32) /* Used for a braille device */
-
-struct console {
-	char	name[16];
-	void	(*write)(struct console *, const char *, unsigned);
-	int	(*read)(struct console *, char *, unsigned);
-	struct tty_driver *(*device)(struct console *, int *);
-	void	(*unblank)(void);
-	int	(*setup)(struct console *, char *);
-	int	(*early_setup)(void);
-	short	flags;
-	short	index;
-	int	cflag;
-	void	*data;
-	struct	 console *next;
-};
-
-/*
- * for_each_console() allows you to iterate on each console
- */
-#define for_each_console(con) \
-	for (con = console_drivers; con != NULL; con = con->next)
-
-extern int console_set_on_cmdline;
-
-extern int add_preferred_console(char *name, int idx, char *options);
-extern int update_console_cmdline(char *name, int idx, char *name_new, int idx_new, char *options);
-extern void register_console(struct console *);
-extern int unregister_console(struct console *);
-extern struct console *console_drivers;
-extern void console_lock(void);
-extern int console_trylock(void);
-extern void console_unlock(void);
-extern void console_conditional_schedule(void);
-extern void console_unblank(void);
-extern struct tty_driver *console_device(int *);
-extern void console_stop(struct console *);
-extern void console_start(struct console *);
-extern int is_console_locked(void);
-extern int braille_register_console(struct console *, int index,
-		char *console_options, char *braille_options);
-extern int braille_unregister_console(struct console *);
-extern void console_sysfs_notify(void);
-extern bool console_suspend_enabled;
-
-/* Suspend and resume console messages over PM events */
-extern void suspend_console(void);
-extern void resume_console(void);
-
-int mda_console_init(void);
-void prom_con_init(void);
-
-void vcs_make_sysfs(int index);
-void vcs_remove_sysfs(int index);
-
-/* Some debug stub to catch some of the obvious races in the VT code */
-#if 1
-#define WARN_CONSOLE_UNLOCKED()	WARN_ON(!is_console_locked() && !oops_in_progress)
-#else
-#define WARN_CONSOLE_UNLOCKED()
-#endif
-
-/* VESA Blanking Levels */
-#define VESA_NO_BLANKING        0
-#define VESA_VSYNC_SUSPEND      1
-#define VESA_HSYNC_SUSPEND      2
-#define VESA_POWERDOWN          3
-
-#ifdef CONFIG_VGA_CONSOLE
-extern bool vgacon_text_force(void);
-#endif
-
-#endif /* _LINUX_CONSOLE_H */
diff --git a/ANDROID_3.4.5/include/linux/console_struct.h b/ANDROID_3.4.5/include/linux/console_struct.h
deleted file mode 100644
index 7f0c3290..00000000
--- a/ANDROID_3.4.5/include/linux/console_struct.h
+++ /dev/null
@@ -1,139 +0,0 @@
-/*
- * console_struct.h
- *
- * Data structure describing single virtual console except for data
- * used by vt.c.
- *
- * Fields marked with [#] must be set by the low-level driver.
- * Fields marked with [!] can be changed by the low-level driver
- * to achieve effects such as fast scrolling by changing the origin.
- */
-
-#ifndef _LINUX_CONSOLE_STRUCT_H
-#define _LINUX_CONSOLE_STRUCT_H
-
-#include <linux/wait.h>
-#include <linux/vt.h>
-#include <linux/workqueue.h>
-
-struct vt_struct;
-
-#define NPAR 16
-
-struct vc_data {
-	struct tty_port port;			/* Upper level data */
-
-	unsigned short	vc_num;			/* Console number */
-	unsigned int	vc_cols;		/* [#] Console size */
-	unsigned int	vc_rows;
-	unsigned int	vc_size_row;		/* Bytes per row */
-	unsigned int	vc_scan_lines;		/* # of scan lines */
-	unsigned long	vc_origin;		/* [!] Start of real screen */
-	unsigned long	vc_scr_end;		/* [!] End of real screen */
-	unsigned long	vc_visible_origin;	/* [!] Top of visible window */
-	unsigned int	vc_top, vc_bottom;	/* Scrolling region */
-	const struct consw *vc_sw;
-	unsigned short	*vc_screenbuf;		/* In-memory character/attribute buffer */
-	unsigned int	vc_screenbuf_size;
-	unsigned char	vc_mode;		/* KD_TEXT, ... */
-	/* attributes for all characters on screen */
-	unsigned char	vc_attr;		/* Current attributes */
-	unsigned char	vc_def_color;		/* Default colors */
-	unsigned char	vc_color;		/* Foreground & background */
-	unsigned char	vc_s_color;		/* Saved foreground & background */
-	unsigned char	vc_ulcolor;		/* Color for underline mode */
-	unsigned char   vc_itcolor;
-	unsigned char	vc_halfcolor;		/* Color for half intensity mode */
-	/* cursor */
-	unsigned int	vc_cursor_type;
-	unsigned short	vc_complement_mask;	/* [#] Xor mask for mouse pointer */
-	unsigned short	vc_s_complement_mask;	/* Saved mouse pointer mask */
-	unsigned int	vc_x, vc_y;		/* Cursor position */
-	unsigned int	vc_saved_x, vc_saved_y;
-	unsigned long	vc_pos;			/* Cursor address */
-	/* fonts */	
-	unsigned short	vc_hi_font_mask;	/* [#] Attribute set for upper 256 chars of font or 0 if not supported */
-	struct console_font vc_font;		/* Current VC font set */
-	unsigned short	vc_video_erase_char;	/* Background erase character */
-	/* VT terminal data */
-	unsigned int	vc_state;		/* Escape sequence parser state */
-	unsigned int	vc_npar,vc_par[NPAR];	/* Parameters of current escape sequence */
-	/* data for manual vt switching */
-	struct vt_mode	vt_mode;
-	struct pid 	*vt_pid;
-	int		vt_newvt;
-	wait_queue_head_t paste_wait;
-	/* mode flags */
-	unsigned int	vc_charset	: 1;	/* Character set G0 / G1 */
-	unsigned int	vc_s_charset	: 1;	/* Saved character set */
-	unsigned int	vc_disp_ctrl	: 1;	/* Display chars < 32? */
-	unsigned int	vc_toggle_meta	: 1;	/* Toggle high bit? */
-	unsigned int	vc_decscnm	: 1;	/* Screen Mode */
-	unsigned int	vc_decom	: 1;	/* Origin Mode */
-	unsigned int	vc_decawm	: 1;	/* Autowrap Mode */
-	unsigned int	vc_deccm	: 1;	/* Cursor Visible */
-	unsigned int	vc_decim	: 1;	/* Insert Mode */
-	unsigned int	vc_deccolm	: 1;	/* 80/132 Column Mode */
-	/* attribute flags */
-	unsigned int	vc_intensity	: 2;	/* 0=half-bright, 1=normal, 2=bold */
-	unsigned int    vc_italic:1;
-	unsigned int	vc_underline	: 1;
-	unsigned int	vc_blink	: 1;
-	unsigned int	vc_reverse	: 1;
-	unsigned int	vc_s_intensity	: 2;	/* saved rendition */
-	unsigned int    vc_s_italic:1;
-	unsigned int	vc_s_underline	: 1;
-	unsigned int	vc_s_blink	: 1;
-	unsigned int	vc_s_reverse	: 1;
-	/* misc */
-	unsigned int	vc_ques		: 1;
-	unsigned int	vc_need_wrap	: 1;
-	unsigned int	vc_can_do_color	: 1;
-	unsigned int	vc_report_mouse : 2;
-	unsigned char	vc_utf		: 1;	/* Unicode UTF-8 encoding */
-	unsigned char	vc_utf_count;
-		 int	vc_utf_char;
-	unsigned int	vc_tab_stop[8];		/* Tab stops. 256 columns. */
-	unsigned char   vc_palette[16*3];       /* Colour palette for VGA+ */
-	unsigned short * vc_translate;
-	unsigned char 	vc_G0_charset;
-	unsigned char 	vc_G1_charset;
-	unsigned char 	vc_saved_G0;
-	unsigned char 	vc_saved_G1;
-	unsigned int    vc_resize_user;         /* resize request from user */
-	unsigned int	vc_bell_pitch;		/* Console bell pitch */
-	unsigned int	vc_bell_duration;	/* Console bell duration */
-	struct vc_data **vc_display_fg;		/* [!] Ptr to var holding fg console for this display */
-	unsigned long	vc_uni_pagedir;
-	unsigned long	*vc_uni_pagedir_loc;  /* [!] Location of uni_pagedir variable for this console */
-	bool vc_panic_force_write; /* when oops/panic this VC can accept forced output/blanking */
-	/* additional information is in vt_kern.h */
-};
-
-struct vc {
-	struct vc_data *d;
-	struct work_struct SAK_work;
-
-	/* might add  scrmem, vt_struct, kbd  at some time,
-	   to have everything in one place - the disadvantage
-	   would be that vc_cons etc can no longer be static */
-};
-
-extern struct vc vc_cons [MAX_NR_CONSOLES];
-extern void vc_SAK(struct work_struct *work);
-
-#define CUR_DEF		0
-#define CUR_NONE	1
-#define CUR_UNDERLINE	2
-#define CUR_LOWER_THIRD	3
-#define CUR_LOWER_HALF	4
-#define CUR_TWO_THIRDS	5
-#define CUR_BLOCK	6
-#define CUR_HWMASK	0x0f
-#define CUR_SWMASK	0xfff0
-
-#define CUR_DEFAULT CUR_UNDERLINE
-
-#define CON_IS_VISIBLE(conp) (*conp->vc_display_fg == conp)
-
-#endif /* _LINUX_CONSOLE_STRUCT_H */
diff --git a/ANDROID_3.4.5/include/linux/consolemap.h b/ANDROID_3.4.5/include/linux/consolemap.h
deleted file mode 100644
index c4811da1..00000000
--- a/ANDROID_3.4.5/include/linux/consolemap.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * consolemap.h
- *
- * Interface between console.c, selection.c  and consolemap.c
- */
-#ifndef __LINUX_CONSOLEMAP_H__
-#define __LINUX_CONSOLEMAP_H__
-
-#define LAT1_MAP 0
-#define GRAF_MAP 1
-#define IBMPC_MAP 2
-#define USER_MAP 3
-
-#include <linux/types.h>
-
-#ifdef CONFIG_CONSOLE_TRANSLATIONS
-struct vc_data;
-
-extern u16 inverse_translate(struct vc_data *conp, int glyph, int use_unicode);
-extern unsigned short *set_translate(int m, struct vc_data *vc);
-extern int conv_uni_to_pc(struct vc_data *conp, long ucs);
-extern u32 conv_8bit_to_uni(unsigned char c);
-extern int conv_uni_to_8bit(u32 uni);
-void console_map_init(void);
-#else
-#define inverse_translate(conp, glyph, uni) ((uint16_t)glyph)
-#define set_translate(m, vc) ((unsigned short *)NULL)
-#define conv_uni_to_pc(conp, ucs) ((int) (ucs > 0xff ? -1: ucs))
-#define conv_8bit_to_uni(c) ((uint32_t)(c))
-#define conv_uni_to_8bit(c) ((int) ((c) & 0xff))
-#define console_map_init(c) do { ; } while (0)
-#endif /* CONFIG_CONSOLE_TRANSLATIONS */
-
-#endif /* __LINUX_CONSOLEMAP_H__ */
diff --git a/ANDROID_3.4.5/include/linux/const.h b/ANDROID_3.4.5/include/linux/const.h
deleted file mode 100644
index c22c707c..00000000
--- a/ANDROID_3.4.5/include/linux/const.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/* const.h: Macros for dealing with constants.  */
-
-#ifndef _LINUX_CONST_H
-#define _LINUX_CONST_H
-
-/* Some constant macros are used in both assembler and
- * C code.  Therefore we cannot annotate them always with
- * 'UL' and other type specifiers unilaterally.  We
- * use the following macros to deal with this.
- *
- * Similarly, _AT() will cast an expression with a type in C, but
- * leave it unchanged in asm.
- */
-
-#ifdef __ASSEMBLY__
-#define _AC(X,Y)	X
-#define _AT(T,X)	X
-#else
-#define __AC(X,Y)	(X##Y)
-#define _AC(X,Y)	__AC(X,Y)
-#define _AT(T,X)	((T)(X))
-#endif
-
-#endif /* !(_LINUX_CONST_H) */
diff --git a/ANDROID_3.4.5/include/linux/cordic.h b/ANDROID_3.4.5/include/linux/cordic.h
deleted file mode 100644
index cf68ca4a..00000000
--- a/ANDROID_3.4.5/include/linux/cordic.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * Copyright (c) 2011 Broadcom Corporation
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
- * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
- * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
- * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- */
-#ifndef __CORDIC_H_
-#define __CORDIC_H_
-
-#include <linux/types.h>
-
-/**
- * struct cordic_iq - i/q coordinate.
- *
- * @i: real part of coordinate (in phase).
- * @q: imaginary part of coordinate (quadrature).
- */
-struct cordic_iq {
-	s32 i;
-	s32 q;
-};
-
-/**
- * cordic_calc_iq() - calculates the i/q coordinate for given angle.
- *
- * @theta: angle in degrees for which i/q coordinate is to be calculated.
- * @coord: function output parameter holding the i/q coordinate.
- *
- * The function calculates the i/q coordinate for a given angle using the
- * CORDIC algorithm. The coordinate consists of a real (i) and an
- * imaginary (q) part. The real part is essentially the cosine of the
- * angle and the imaginary part is the sine of the angle. The returned
- * values are scaled by 2^16 for precision. The range for theta is
- * for -180 degrees to +180 degrees. Passed values outside this range are
- * converted before doing the actual calculation.
- */
-struct cordic_iq cordic_calc_iq(s32 theta);
-
-#endif /* __CORDIC_H_ */
diff --git a/ANDROID_3.4.5/include/linux/coredump.h b/ANDROID_3.4.5/include/linux/coredump.h
deleted file mode 100644
index ba4b85a6..00000000
--- a/ANDROID_3.4.5/include/linux/coredump.h
+++ /dev/null
@@ -1,15 +0,0 @@
-#ifndef _LINUX_COREDUMP_H
-#define _LINUX_COREDUMP_H
-
-#include <linux/types.h>
-#include <linux/mm.h>
-#include <linux/fs.h>
-
-/*
- * These are the only things you should do on a core-file: use only these
- * functions to write out all the necessary info.
- */
-extern int dump_write(struct file *file, const void *addr, int nr);
-extern int dump_seek(struct file *file, loff_t off);
-
-#endif /* _LINUX_COREDUMP_H */
diff --git a/ANDROID_3.4.5/include/linux/cper.h b/ANDROID_3.4.5/include/linux/cper.h
deleted file mode 100644
index c2304949..00000000
--- a/ANDROID_3.4.5/include/linux/cper.h
+++ /dev/null
@@ -1,394 +0,0 @@
-/*
- * UEFI Common Platform Error Record
- *
- * Copyright (C) 2010, Intel Corp.
- *	Author: Huang Ying <ying.huang@intel.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version
- * 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef LINUX_CPER_H
-#define LINUX_CPER_H
-
-#include <linux/uuid.h>
-
-/* CPER record signature and the size */
-#define CPER_SIG_RECORD				"CPER"
-#define CPER_SIG_SIZE				4
-/* Used in signature_end field in struct cper_record_header */
-#define CPER_SIG_END				0xffffffff
-
-/*
- * CPER record header revision, used in revision field in struct
- * cper_record_header
- */
-#define CPER_RECORD_REV				0x0100
-
-/*
- * Severity difinition for error_severity in struct cper_record_header
- * and section_severity in struct cper_section_descriptor
- */
-enum {
-	CPER_SEV_RECOVERABLE,
-	CPER_SEV_FATAL,
-	CPER_SEV_CORRECTED,
-	CPER_SEV_INFORMATIONAL,
-};
-
-/*
- * Validation bits difinition for validation_bits in struct
- * cper_record_header. If set, corresponding fields in struct
- * cper_record_header contain valid information.
- *
- * corresponds platform_id
- */
-#define CPER_VALID_PLATFORM_ID			0x0001
-/* corresponds timestamp */
-#define CPER_VALID_TIMESTAMP			0x0002
-/* corresponds partition_id */
-#define CPER_VALID_PARTITION_ID			0x0004
-
-/*
- * Notification type used to generate error record, used in
- * notification_type in struct cper_record_header
- *
- * Corrected Machine Check
- */
-#define CPER_NOTIFY_CMC							\
-	UUID_LE(0x2DCE8BB1, 0xBDD7, 0x450e, 0xB9, 0xAD, 0x9C, 0xF4,	\
-		0xEB, 0xD4, 0xF8, 0x90)
-/* Corrected Platform Error */
-#define CPER_NOTIFY_CPE							\
-	UUID_LE(0x4E292F96, 0xD843, 0x4a55, 0xA8, 0xC2, 0xD4, 0x81,	\
-		0xF2, 0x7E, 0xBE, 0xEE)
-/* Machine Check Exception */
-#define CPER_NOTIFY_MCE							\
-	UUID_LE(0xE8F56FFE, 0x919C, 0x4cc5, 0xBA, 0x88, 0x65, 0xAB,	\
-		0xE1, 0x49, 0x13, 0xBB)
-/* PCI Express Error */
-#define CPER_NOTIFY_PCIE						\
-	UUID_LE(0xCF93C01F, 0x1A16, 0x4dfc, 0xB8, 0xBC, 0x9C, 0x4D,	\
-		0xAF, 0x67, 0xC1, 0x04)
-/* INIT Record (for IPF) */
-#define CPER_NOTIFY_INIT						\
-	UUID_LE(0xCC5263E8, 0x9308, 0x454a, 0x89, 0xD0, 0x34, 0x0B,	\
-		0xD3, 0x9B, 0xC9, 0x8E)
-/* Non-Maskable Interrupt */
-#define CPER_NOTIFY_NMI							\
-	UUID_LE(0x5BAD89FF, 0xB7E6, 0x42c9, 0x81, 0x4A, 0xCF, 0x24,	\
-		0x85, 0xD6, 0xE9, 0x8A)
-/* BOOT Error Record */
-#define CPER_NOTIFY_BOOT						\
-	UUID_LE(0x3D61A466, 0xAB40, 0x409a, 0xA6, 0x98, 0xF3, 0x62,	\
-		0xD4, 0x64, 0xB3, 0x8F)
-/* DMA Remapping Error */
-#define CPER_NOTIFY_DMAR						\
-	UUID_LE(0x667DD791, 0xC6B3, 0x4c27, 0x8A, 0x6B, 0x0F, 0x8E,	\
-		0x72, 0x2D, 0xEB, 0x41)
-
-/*
- * Flags bits definitions for flags in struct cper_record_header
- * If set, the error has been recovered
- */
-#define CPER_HW_ERROR_FLAGS_RECOVERED		0x1
-/* If set, the error is for previous boot */
-#define CPER_HW_ERROR_FLAGS_PREVERR		0x2
-/* If set, the error is injected for testing */
-#define CPER_HW_ERROR_FLAGS_SIMULATED		0x4
-
-/*
- * CPER section header revision, used in revision field in struct
- * cper_section_descriptor
- */
-#define CPER_SEC_REV				0x0100
-
-/*
- * Validation bits difinition for validation_bits in struct
- * cper_section_descriptor. If set, corresponding fields in struct
- * cper_section_descriptor contain valid information.
- *
- * corresponds fru_id
- */
-#define CPER_SEC_VALID_FRU_ID			0x1
-/* corresponds fru_text */
-#define CPER_SEC_VALID_FRU_TEXT			0x2
-
-/*
- * Flags bits definitions for flags in struct cper_section_descriptor
- *
- * If set, the section is associated with the error condition
- * directly, and should be focused on
- */
-#define CPER_SEC_PRIMARY			0x0001
-/*
- * If set, the error was not contained within the processor or memory
- * hierarchy and the error may have propagated to persistent storage
- * or network
- */
-#define CPER_SEC_CONTAINMENT_WARNING		0x0002
-/* If set, the component must be re-initialized or re-enabled prior to use */
-#define CPER_SEC_RESET				0x0004
-/* If set, Linux may choose to discontinue use of the resource */
-#define CPER_SEC_ERROR_THRESHOLD_EXCEEDED	0x0008
-/*
- * If set, resource could not be queried for error information due to
- * conflicts with other system software or resources. Some fields of
- * the section will be invalid
- */
-#define CPER_SEC_RESOURCE_NOT_ACCESSIBLE	0x0010
-/*
- * If set, action has been taken to ensure error containment (such as
- * poisoning data), but the error has not been fully corrected and the
- * data has not been consumed. Linux may choose to take further
- * corrective action before the data is consumed
- */
-#define CPER_SEC_LATENT_ERROR			0x0020
-
-/*
- * Section type definitions, used in section_type field in struct
- * cper_section_descriptor
- *
- * Processor Generic
- */
-#define CPER_SEC_PROC_GENERIC						\
-	UUID_LE(0x9876CCAD, 0x47B4, 0x4bdb, 0xB6, 0x5E, 0x16, 0xF1,	\
-		0x93, 0xC4, 0xF3, 0xDB)
-/* Processor Specific: X86/X86_64 */
-#define CPER_SEC_PROC_IA						\
-	UUID_LE(0xDC3EA0B0, 0xA144, 0x4797, 0xB9, 0x5B, 0x53, 0xFA,	\
-		0x24, 0x2B, 0x6E, 0x1D)
-/* Processor Specific: IA64 */
-#define CPER_SEC_PROC_IPF						\
-	UUID_LE(0xE429FAF1, 0x3CB7, 0x11D4, 0x0B, 0xCA, 0x07, 0x00,	\
-		0x80, 0xC7, 0x3C, 0x88, 0x81)
-/* Platform Memory */
-#define CPER_SEC_PLATFORM_MEM						\
-	UUID_LE(0xA5BC1114, 0x6F64, 0x4EDE, 0xB8, 0x63, 0x3E, 0x83,	\
-		0xED, 0x7C, 0x83, 0xB1)
-#define CPER_SEC_PCIE							\
-	UUID_LE(0xD995E954, 0xBBC1, 0x430F, 0xAD, 0x91, 0xB4, 0x4D,	\
-		0xCB, 0x3C, 0x6F, 0x35)
-/* Firmware Error Record Reference */
-#define CPER_SEC_FW_ERR_REC_REF						\
-	UUID_LE(0x81212A96, 0x09ED, 0x4996, 0x94, 0x71, 0x8D, 0x72,	\
-		0x9C, 0x8E, 0x69, 0xED)
-/* PCI/PCI-X Bus */
-#define CPER_SEC_PCI_X_BUS						\
-	UUID_LE(0xC5753963, 0x3B84, 0x4095, 0xBF, 0x78, 0xED, 0xDA,	\
-		0xD3, 0xF9, 0xC9, 0xDD)
-/* PCI Component/Device */
-#define CPER_SEC_PCI_DEV						\
-	UUID_LE(0xEB5E4685, 0xCA66, 0x4769, 0xB6, 0xA2, 0x26, 0x06,	\
-		0x8B, 0x00, 0x13, 0x26)
-#define CPER_SEC_DMAR_GENERIC						\
-	UUID_LE(0x5B51FEF7, 0xC79D, 0x4434, 0x8F, 0x1B, 0xAA, 0x62,	\
-		0xDE, 0x3E, 0x2C, 0x64)
-/* Intel VT for Directed I/O specific DMAr */
-#define CPER_SEC_DMAR_VT						\
-	UUID_LE(0x71761D37, 0x32B2, 0x45cd, 0xA7, 0xD0, 0xB0, 0xFE,	\
-		0xDD, 0x93, 0xE8, 0xCF)
-/* IOMMU specific DMAr */
-#define CPER_SEC_DMAR_IOMMU						\
-	UUID_LE(0x036F84E1, 0x7F37, 0x428c, 0xA7, 0x9E, 0x57, 0x5F,	\
-		0xDF, 0xAA, 0x84, 0xEC)
-
-#define CPER_PROC_VALID_TYPE			0x0001
-#define CPER_PROC_VALID_ISA			0x0002
-#define CPER_PROC_VALID_ERROR_TYPE		0x0004
-#define CPER_PROC_VALID_OPERATION		0x0008
-#define CPER_PROC_VALID_FLAGS			0x0010
-#define CPER_PROC_VALID_LEVEL			0x0020
-#define CPER_PROC_VALID_VERSION			0x0040
-#define CPER_PROC_VALID_BRAND_INFO		0x0080
-#define CPER_PROC_VALID_ID			0x0100
-#define CPER_PROC_VALID_TARGET_ADDRESS		0x0200
-#define CPER_PROC_VALID_REQUESTOR_ID		0x0400
-#define CPER_PROC_VALID_RESPONDER_ID		0x0800
-#define CPER_PROC_VALID_IP			0x1000
-
-#define CPER_MEM_VALID_ERROR_STATUS		0x0001
-#define CPER_MEM_VALID_PHYSICAL_ADDRESS		0x0002
-#define CPER_MEM_VALID_PHYSICAL_ADDRESS_MASK	0x0004
-#define CPER_MEM_VALID_NODE			0x0008
-#define CPER_MEM_VALID_CARD			0x0010
-#define CPER_MEM_VALID_MODULE			0x0020
-#define CPER_MEM_VALID_BANK			0x0040
-#define CPER_MEM_VALID_DEVICE			0x0080
-#define CPER_MEM_VALID_ROW			0x0100
-#define CPER_MEM_VALID_COLUMN			0x0200
-#define CPER_MEM_VALID_BIT_POSITION		0x0400
-#define CPER_MEM_VALID_REQUESTOR_ID		0x0800
-#define CPER_MEM_VALID_RESPONDER_ID		0x1000
-#define CPER_MEM_VALID_TARGET_ID		0x2000
-#define CPER_MEM_VALID_ERROR_TYPE		0x4000
-
-#define CPER_PCIE_VALID_PORT_TYPE		0x0001
-#define CPER_PCIE_VALID_VERSION			0x0002
-#define CPER_PCIE_VALID_COMMAND_STATUS		0x0004
-#define CPER_PCIE_VALID_DEVICE_ID		0x0008
-#define CPER_PCIE_VALID_SERIAL_NUMBER		0x0010
-#define CPER_PCIE_VALID_BRIDGE_CONTROL_STATUS	0x0020
-#define CPER_PCIE_VALID_CAPABILITY		0x0040
-#define CPER_PCIE_VALID_AER_INFO		0x0080
-
-#define CPER_PCIE_SLOT_SHIFT			3
-
-/*
- * All tables and structs must be byte-packed to match CPER
- * specification, since the tables are provided by the system BIOS
- */
-#pragma pack(1)
-
-struct cper_record_header {
-	char	signature[CPER_SIG_SIZE];	/* must be CPER_SIG_RECORD */
-	__u16	revision;			/* must be CPER_RECORD_REV */
-	__u32	signature_end;			/* must be CPER_SIG_END */
-	__u16	section_count;
-	__u32	error_severity;
-	__u32	validation_bits;
-	__u32	record_length;
-	__u64	timestamp;
-	uuid_le	platform_id;
-	uuid_le	partition_id;
-	uuid_le	creator_id;
-	uuid_le	notification_type;
-	__u64	record_id;
-	__u32	flags;
-	__u64	persistence_information;
-	__u8	reserved[12];			/* must be zero */
-};
-
-struct cper_section_descriptor {
-	__u32	section_offset;		/* Offset in bytes of the
-					 *  section body from the base
-					 *  of the record header */
-	__u32	section_length;
-	__u16	revision;		/* must be CPER_RECORD_REV */
-	__u8	validation_bits;
-	__u8	reserved;		/* must be zero */
-	__u32	flags;
-	uuid_le	section_type;
-	uuid_le	fru_id;
-	__u32	section_severity;
-	__u8	fru_text[20];
-};
-
-/* Generic Processor Error Section */
-struct cper_sec_proc_generic {
-	__u64	validation_bits;
-	__u8	proc_type;
-	__u8	proc_isa;
-	__u8	proc_error_type;
-	__u8	operation;
-	__u8	flags;
-	__u8	level;
-	__u16	reserved;
-	__u64	cpu_version;
-	char	cpu_brand[128];
-	__u64	proc_id;
-	__u64	target_addr;
-	__u64	requestor_id;
-	__u64	responder_id;
-	__u64	ip;
-};
-
-/* IA32/X64 Processor Error Section */
-struct cper_sec_proc_ia {
-	__u64	validation_bits;
-	__u8	lapic_id;
-	__u8	cpuid[48];
-};
-
-/* IA32/X64 Processor Error Information Structure */
-struct cper_ia_err_info {
-	uuid_le	err_type;
-	__u64	validation_bits;
-	__u64	check_info;
-	__u64	target_id;
-	__u64	requestor_id;
-	__u64	responder_id;
-	__u64	ip;
-};
-
-/* IA32/X64 Processor Context Information Structure */
-struct cper_ia_proc_ctx {
-	__u16	reg_ctx_type;
-	__u16	reg_arr_size;
-	__u32	msr_addr;
-	__u64	mm_reg_addr;
-};
-
-/* Memory Error Section */
-struct cper_sec_mem_err {
-	__u64	validation_bits;
-	__u64	error_status;
-	__u64	physical_addr;
-	__u64	physical_addr_mask;
-	__u16	node;
-	__u16	card;
-	__u16	module;
-	__u16	bank;
-	__u16	device;
-	__u16	row;
-	__u16	column;
-	__u16	bit_pos;
-	__u64	requestor_id;
-	__u64	responder_id;
-	__u64	target_id;
-	__u8	error_type;
-};
-
-struct cper_sec_pcie {
-	__u64		validation_bits;
-	__u32		port_type;
-	struct {
-		__u8	minor;
-		__u8	major;
-		__u8	reserved[2];
-	}		version;
-	__u16		command;
-	__u16		status;
-	__u32		reserved;
-	struct {
-		__u16	vendor_id;
-		__u16	device_id;
-		__u8	class_code[3];
-		__u8	function;
-		__u8	device;
-		__u16	segment;
-		__u8	bus;
-		__u8	secondary_bus;
-		__u16	slot;
-		__u8	reserved;
-	}		device_id;
-	struct {
-		__u32	lower;
-		__u32	upper;
-	}		serial_number;
-	struct {
-		__u16	secondary_status;
-		__u16	control;
-	}		bridge;
-	__u8	capability[60];
-	__u8	aer_info[96];
-};
-
-/* Reset to default packing */
-#pragma pack()
-
-u64 cper_next_record_id(void);
-void cper_print_bits(const char *prefix, unsigned int bits,
-		     const char *strs[], unsigned int strs_size);
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/cpu.h b/ANDROID_3.4.5/include/linux/cpu.h
deleted file mode 100644
index 11dd01b8..00000000
--- a/ANDROID_3.4.5/include/linux/cpu.h
+++ /dev/null
@@ -1,222 +0,0 @@
-/*
- * include/linux/cpu.h - generic cpu definition
- *
- * This is mainly for topological representation. We define the 
- * basic 'struct cpu' here, which can be embedded in per-arch 
- * definitions of processors.
- *
- * Basic handling of the devices is done in drivers/base/cpu.c
- * and system devices are handled in drivers/base/sys.c. 
- *
- * CPUs are exported via sysfs in the class/cpu/devices/
- * directory. 
- */
-#ifndef _LINUX_CPU_H_
-#define _LINUX_CPU_H_
-
-#include <linux/node.h>
-#include <linux/compiler.h>
-#include <linux/cpumask.h>
-
-struct device;
-
-struct cpu {
-	int node_id;		/* The node which contains the CPU */
-	int hotpluggable;	/* creates sysfs control file if hotpluggable */
-	struct device dev;
-};
-
-extern int register_cpu(struct cpu *cpu, int num);
-extern struct device *get_cpu_device(unsigned cpu);
-extern bool cpu_is_hotpluggable(unsigned cpu);
-
-extern int cpu_add_dev_attr(struct device_attribute *attr);
-extern void cpu_remove_dev_attr(struct device_attribute *attr);
-
-extern int cpu_add_dev_attr_group(struct attribute_group *attrs);
-extern void cpu_remove_dev_attr_group(struct attribute_group *attrs);
-
-extern int sched_create_sysfs_power_savings_entries(struct device *dev);
-
-#ifdef CONFIG_HOTPLUG_CPU
-extern void unregister_cpu(struct cpu *cpu);
-extern ssize_t arch_cpu_probe(const char *, size_t);
-extern ssize_t arch_cpu_release(const char *, size_t);
-#endif
-struct notifier_block;
-
-#ifdef CONFIG_ARCH_HAS_CPU_AUTOPROBE
-extern int arch_cpu_uevent(struct device *dev, struct kobj_uevent_env *env);
-extern ssize_t arch_print_cpu_modalias(struct device *dev,
-				       struct device_attribute *attr,
-				       char *bufptr);
-#endif
-
-/*
- * CPU notifier priorities.
- */
-enum {
-	/*
-	 * SCHED_ACTIVE marks a cpu which is coming up active during
-	 * CPU_ONLINE and CPU_DOWN_FAILED and must be the first
-	 * notifier.  CPUSET_ACTIVE adjusts cpuset according to
-	 * cpu_active mask right after SCHED_ACTIVE.  During
-	 * CPU_DOWN_PREPARE, SCHED_INACTIVE and CPUSET_INACTIVE are
-	 * ordered in the similar way.
-	 *
-	 * This ordering guarantees consistent cpu_active mask and
-	 * migration behavior to all cpu notifiers.
-	 */
-	CPU_PRI_SCHED_ACTIVE	= INT_MAX,
-	CPU_PRI_CPUSET_ACTIVE	= INT_MAX - 1,
-	CPU_PRI_SCHED_INACTIVE	= INT_MIN + 1,
-	CPU_PRI_CPUSET_INACTIVE	= INT_MIN,
-
-	/* migration should happen before other stuff but after perf */
-	CPU_PRI_PERF		= 20,
-	CPU_PRI_MIGRATION	= 10,
-	/* prepare workqueues for other notifiers */
-	CPU_PRI_WORKQUEUE	= 5,
-};
-
-#define CPU_ONLINE		0x0002 /* CPU (unsigned)v is up */
-#define CPU_UP_PREPARE		0x0003 /* CPU (unsigned)v coming up */
-#define CPU_UP_CANCELED		0x0004 /* CPU (unsigned)v NOT coming up */
-#define CPU_DOWN_PREPARE	0x0005 /* CPU (unsigned)v going down */
-#define CPU_DOWN_FAILED		0x0006 /* CPU (unsigned)v NOT going down */
-#define CPU_DEAD		0x0007 /* CPU (unsigned)v dead */
-#define CPU_DYING		0x0008 /* CPU (unsigned)v not running any task,
-					* not handling interrupts, soon dead.
-					* Called on the dying cpu, interrupts
-					* are already disabled. Must not
-					* sleep, must not fail */
-#define CPU_POST_DEAD		0x0009 /* CPU (unsigned)v dead, cpu_hotplug
-					* lock is dropped */
-#define CPU_STARTING		0x000A /* CPU (unsigned)v soon running.
-					* Called on the new cpu, just before
-					* enabling interrupts. Must not sleep,
-					* must not fail */
-
-/* Used for CPU hotplug events occurring while tasks are frozen due to a suspend
- * operation in progress
- */
-#define CPU_TASKS_FROZEN	0x0010
-
-#define CPU_ONLINE_FROZEN	(CPU_ONLINE | CPU_TASKS_FROZEN)
-#define CPU_UP_PREPARE_FROZEN	(CPU_UP_PREPARE | CPU_TASKS_FROZEN)
-#define CPU_UP_CANCELED_FROZEN	(CPU_UP_CANCELED | CPU_TASKS_FROZEN)
-#define CPU_DOWN_PREPARE_FROZEN	(CPU_DOWN_PREPARE | CPU_TASKS_FROZEN)
-#define CPU_DOWN_FAILED_FROZEN	(CPU_DOWN_FAILED | CPU_TASKS_FROZEN)
-#define CPU_DEAD_FROZEN		(CPU_DEAD | CPU_TASKS_FROZEN)
-#define CPU_DYING_FROZEN	(CPU_DYING | CPU_TASKS_FROZEN)
-#define CPU_STARTING_FROZEN	(CPU_STARTING | CPU_TASKS_FROZEN)
-
-
-#ifdef CONFIG_SMP
-/* Need to know about CPUs going up/down? */
-#if defined(CONFIG_HOTPLUG_CPU) || !defined(MODULE)
-#define cpu_notifier(fn, pri) {					\
-	static struct notifier_block fn##_nb __cpuinitdata =	\
-		{ .notifier_call = fn, .priority = pri };	\
-	register_cpu_notifier(&fn##_nb);			\
-}
-#else /* #if defined(CONFIG_HOTPLUG_CPU) || !defined(MODULE) */
-#define cpu_notifier(fn, pri)	do { (void)(fn); } while (0)
-#endif /* #else #if defined(CONFIG_HOTPLUG_CPU) || !defined(MODULE) */
-#ifdef CONFIG_HOTPLUG_CPU
-extern int register_cpu_notifier(struct notifier_block *nb);
-extern void unregister_cpu_notifier(struct notifier_block *nb);
-#else
-
-#ifndef MODULE
-extern int register_cpu_notifier(struct notifier_block *nb);
-#else
-static inline int register_cpu_notifier(struct notifier_block *nb)
-{
-	return 0;
-}
-#endif
-
-static inline void unregister_cpu_notifier(struct notifier_block *nb)
-{
-}
-#endif
-
-int cpu_up(unsigned int cpu);
-void notify_cpu_starting(unsigned int cpu);
-extern void cpu_maps_update_begin(void);
-extern void cpu_maps_update_done(void);
-
-#else	/* CONFIG_SMP */
-
-#define cpu_notifier(fn, pri)	do { (void)(fn); } while (0)
-
-static inline int register_cpu_notifier(struct notifier_block *nb)
-{
-	return 0;
-}
-
-static inline void unregister_cpu_notifier(struct notifier_block *nb)
-{
-}
-
-static inline void cpu_maps_update_begin(void)
-{
-}
-
-static inline void cpu_maps_update_done(void)
-{
-}
-
-#endif /* CONFIG_SMP */
-extern struct bus_type cpu_subsys;
-
-#ifdef CONFIG_HOTPLUG_CPU
-/* Stop CPUs going up and down. */
-
-extern void get_online_cpus(void);
-extern void put_online_cpus(void);
-#define hotcpu_notifier(fn, pri)	cpu_notifier(fn, pri)
-#define register_hotcpu_notifier(nb)	register_cpu_notifier(nb)
-#define unregister_hotcpu_notifier(nb)	unregister_cpu_notifier(nb)
-int cpu_down(unsigned int cpu);
-
-#ifdef CONFIG_ARCH_CPU_PROBE_RELEASE
-extern void cpu_hotplug_driver_lock(void);
-extern void cpu_hotplug_driver_unlock(void);
-#else
-static inline void cpu_hotplug_driver_lock(void)
-{
-}
-
-static inline void cpu_hotplug_driver_unlock(void)
-{
-}
-#endif
-
-#else		/* CONFIG_HOTPLUG_CPU */
-
-#define get_online_cpus()	do { } while (0)
-#define put_online_cpus()	do { } while (0)
-#define hotcpu_notifier(fn, pri)	do { (void)(fn); } while (0)
-/* These aren't inline functions due to a GCC bug. */
-#define register_hotcpu_notifier(nb)	({ (void)(nb); 0; })
-#define unregister_hotcpu_notifier(nb)	({ (void)(nb); })
-#endif		/* CONFIG_HOTPLUG_CPU */
-
-#ifdef CONFIG_PM_SLEEP_SMP
-extern int disable_nonboot_cpus(void);
-extern void enable_nonboot_cpus(void);
-#else /* !CONFIG_PM_SLEEP_SMP */
-static inline int disable_nonboot_cpus(void) { return 0; }
-static inline void enable_nonboot_cpus(void) {}
-#endif /* !CONFIG_PM_SLEEP_SMP */
-
-#define IDLE_START 1
-#define IDLE_END 2
-
-void idle_notifier_register(struct notifier_block *n);
-void idle_notifier_unregister(struct notifier_block *n);
-void idle_notifier_call_chain(unsigned long val);
-
-#endif /* _LINUX_CPU_H_ */
diff --git a/ANDROID_3.4.5/include/linux/cpu_pm.h b/ANDROID_3.4.5/include/linux/cpu_pm.h
deleted file mode 100644
index 455b233d..00000000
--- a/ANDROID_3.4.5/include/linux/cpu_pm.h
+++ /dev/null
@@ -1,109 +0,0 @@
-/*
- * Copyright (C) 2011 Google, Inc.
- *
- * Author:
- *	Colin Cross <ccross@android.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef _LINUX_CPU_PM_H
-#define _LINUX_CPU_PM_H
-
-#include <linux/kernel.h>
-#include <linux/notifier.h>
-
-/*
- * When a CPU goes to a low power state that turns off power to the CPU's
- * power domain, the contents of some blocks (floating point coprocessors,
- * interrupt controllers, caches, timers) in the same power domain can
- * be lost.  The cpm_pm notifiers provide a method for platform idle, suspend,
- * and hotplug implementations to notify the drivers for these blocks that
- * they may be reset.
- *
- * All cpu_pm notifications must be called with interrupts disabled.
- *
- * The notifications are split into two classes: CPU notifications and CPU
- * cluster notifications.
- *
- * CPU notifications apply to a single CPU and must be called on the affected
- * CPU.  They are used to save per-cpu context for affected blocks.
- *
- * CPU cluster notifications apply to all CPUs in a single power domain. They
- * are used to save any global context for affected blocks, and must be called
- * after all the CPUs in the power domain have been notified of the low power
- * state.
- */
-
-/*
- * Event codes passed as unsigned long val to notifier calls
- */
-enum cpu_pm_event {
-	/* A single cpu is entering a low power state */
-	CPU_PM_ENTER,
-
-	/* A single cpu failed to enter a low power state */
-	CPU_PM_ENTER_FAILED,
-
-	/* A single cpu is exiting a low power state */
-	CPU_PM_EXIT,
-
-	/* A cpu power domain is entering a low power state */
-	CPU_CLUSTER_PM_ENTER,
-
-	/* A cpu power domain failed to enter a low power state */
-	CPU_CLUSTER_PM_ENTER_FAILED,
-
-	/* A cpu power domain is exiting a low power state */
-	CPU_CLUSTER_PM_EXIT,
-};
-
-#ifdef CONFIG_CPU_PM
-int cpu_pm_register_notifier(struct notifier_block *nb);
-int cpu_pm_unregister_notifier(struct notifier_block *nb);
-int cpu_pm_enter(void);
-int cpu_pm_exit(void);
-int cpu_cluster_pm_enter(void);
-int cpu_cluster_pm_exit(void);
-
-#else
-
-static inline int cpu_pm_register_notifier(struct notifier_block *nb)
-{
-	return 0;
-}
-
-static inline int cpu_pm_unregister_notifier(struct notifier_block *nb)
-{
-	return 0;
-}
-
-static inline int cpu_pm_enter(void)
-{
-	return 0;
-}
-
-static inline int cpu_pm_exit(void)
-{
-	return 0;
-}
-
-static inline int cpu_cluster_pm_enter(void)
-{
-	return 0;
-}
-
-static inline int cpu_cluster_pm_exit(void)
-{
-	return 0;
-}
-#endif
-#endif
diff --git a/ANDROID_3.4.5/include/linux/cpu_rmap.h b/ANDROID_3.4.5/include/linux/cpu_rmap.h
deleted file mode 100644
index 473771a5..00000000
--- a/ANDROID_3.4.5/include/linux/cpu_rmap.h
+++ /dev/null
@@ -1,73 +0,0 @@
-/*
- * cpu_rmap.c: CPU affinity reverse-map support
- * Copyright 2011 Solarflare Communications Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation, incorporated herein by reference.
- */
-
-#include <linux/cpumask.h>
-#include <linux/gfp.h>
-#include <linux/slab.h>
-
-/**
- * struct cpu_rmap - CPU affinity reverse-map
- * @size: Number of objects to be reverse-mapped
- * @used: Number of objects added
- * @obj: Pointer to array of object pointers
- * @near: For each CPU, the index and distance to the nearest object,
- *      based on affinity masks
- */
-struct cpu_rmap {
-	u16		size, used;
-	void		**obj;
-	struct {
-		u16	index;
-		u16	dist;
-	}		near[0];
-};
-#define CPU_RMAP_DIST_INF 0xffff
-
-extern struct cpu_rmap *alloc_cpu_rmap(unsigned int size, gfp_t flags);
-
-/**
- * free_cpu_rmap - free CPU affinity reverse-map
- * @rmap: Reverse-map allocated with alloc_cpu_rmap(), or %NULL
- */
-static inline void free_cpu_rmap(struct cpu_rmap *rmap)
-{
-	kfree(rmap);
-}
-
-extern int cpu_rmap_add(struct cpu_rmap *rmap, void *obj);
-extern int cpu_rmap_update(struct cpu_rmap *rmap, u16 index,
-			   const struct cpumask *affinity);
-
-static inline u16 cpu_rmap_lookup_index(struct cpu_rmap *rmap, unsigned int cpu)
-{
-	return rmap->near[cpu].index;
-}
-
-static inline void *cpu_rmap_lookup_obj(struct cpu_rmap *rmap, unsigned int cpu)
-{
-	return rmap->obj[rmap->near[cpu].index];
-}
-
-#ifdef CONFIG_GENERIC_HARDIRQS
-
-/**
- * alloc_irq_cpu_rmap - allocate CPU affinity reverse-map for IRQs
- * @size: Number of objects to be mapped
- *
- * Must be called in process context.
- */
-static inline struct cpu_rmap *alloc_irq_cpu_rmap(unsigned int size)
-{
-	return alloc_cpu_rmap(size, GFP_KERNEL);
-}
-extern void free_irq_cpu_rmap(struct cpu_rmap *rmap);
-
-extern int irq_cpu_rmap_add(struct cpu_rmap *rmap, int irq);
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/cpufreq.h b/ANDROID_3.4.5/include/linux/cpufreq.h
deleted file mode 100644
index d1c3bb0e..00000000
--- a/ANDROID_3.4.5/include/linux/cpufreq.h
+++ /dev/null
@@ -1,412 +0,0 @@
-/*
- *  linux/include/linux/cpufreq.h
- *
- *  Copyright (C) 2001 Russell King
- *            (C) 2002 - 2003 Dominik Brodowski <linux@brodo.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef _LINUX_CPUFREQ_H
-#define _LINUX_CPUFREQ_H
-
-#include <linux/mutex.h>
-#include <linux/notifier.h>
-#include <linux/threads.h>
-#include <linux/kobject.h>
-#include <linux/sysfs.h>
-#include <linux/completion.h>
-#include <linux/workqueue.h>
-#include <linux/cpumask.h>
-#include <asm/div64.h>
-
-#define CPUFREQ_NAME_LEN 16
-
-
-/*********************************************************************
- *                     CPUFREQ NOTIFIER INTERFACE                    *
- *********************************************************************/
-
-#define CPUFREQ_TRANSITION_NOTIFIER	(0)
-#define CPUFREQ_POLICY_NOTIFIER		(1)
-
-#ifdef CONFIG_CPU_FREQ
-int cpufreq_register_notifier(struct notifier_block *nb, unsigned int list);
-int cpufreq_unregister_notifier(struct notifier_block *nb, unsigned int list);
-extern void disable_cpufreq(void);
-#else		/* CONFIG_CPU_FREQ */
-static inline int cpufreq_register_notifier(struct notifier_block *nb,
-						unsigned int list)
-{
-	return 0;
-}
-static inline int cpufreq_unregister_notifier(struct notifier_block *nb,
-						unsigned int list)
-{
-	return 0;
-}
-static inline void disable_cpufreq(void) { }
-#endif		/* CONFIG_CPU_FREQ */
-
-/* if (cpufreq_driver->target) exists, the ->governor decides what frequency
- * within the limits is used. If (cpufreq_driver->setpolicy> exists, these
- * two generic policies are available:
- */
-
-#define CPUFREQ_POLICY_POWERSAVE	(1)
-#define CPUFREQ_POLICY_PERFORMANCE	(2)
-
-/* Frequency values here are CPU kHz so that hardware which doesn't run
- * with some frequencies can complain without having to guess what per
- * cent / per mille means.
- * Maximum transition latency is in nanoseconds - if it's unknown,
- * CPUFREQ_ETERNAL shall be used.
- */
-
-struct cpufreq_governor;
-
-/* /sys/devices/system/cpu/cpufreq: entry point for global variables */
-extern struct kobject *cpufreq_global_kobject;
-
-#define CPUFREQ_ETERNAL			(-1)
-struct cpufreq_cpuinfo {
-	unsigned int		max_freq;
-	unsigned int		min_freq;
-
-	/* in 10^(-9) s = nanoseconds */
-	unsigned int		transition_latency;
-};
-
-struct cpufreq_real_policy {
-	unsigned int		min;    /* in kHz */
-	unsigned int		max;    /* in kHz */
-	unsigned int		policy; /* see above */
-	struct cpufreq_governor	*governor; /* see below */
-};
-
-struct cpufreq_policy {
-	cpumask_var_t		cpus;	/* CPUs requiring sw coordination */
-	cpumask_var_t		related_cpus; /* CPUs with any coordination */
-	unsigned int		shared_type; /* ANY or ALL affected CPUs
-						should set cpufreq */
-	unsigned int		cpu;    /* cpu nr of registered CPU */
-	struct cpufreq_cpuinfo	cpuinfo;/* see above */
-
-	unsigned int		min;    /* in kHz */
-	unsigned int		max;    /* in kHz */
-	unsigned int		cur;    /* in kHz, only needed if cpufreq
-					 * governors are used */
-	unsigned int		policy; /* see above */
-	struct cpufreq_governor	*governor; /* see below */
-
-	struct work_struct	update; /* if update_policy() needs to be
-					 * called, but you're in IRQ context */
-
-	struct cpufreq_real_policy	user_policy;
-
-	struct kobject		kobj;
-	struct completion	kobj_unregister;
-};
-
-#define CPUFREQ_ADJUST		(0)
-#define CPUFREQ_INCOMPATIBLE	(1)
-#define CPUFREQ_NOTIFY		(2)
-#define CPUFREQ_START		(3)
-
-#define CPUFREQ_SHARED_TYPE_NONE (0) /* None */
-#define CPUFREQ_SHARED_TYPE_HW	 (1) /* HW does needed coordination */
-#define CPUFREQ_SHARED_TYPE_ALL	 (2) /* All dependent CPUs should set freq */
-#define CPUFREQ_SHARED_TYPE_ANY	 (3) /* Freq can be set from any dependent CPU*/
-
-/******************** cpufreq transition notifiers *******************/
-
-#define CPUFREQ_PRECHANGE	(0)
-#define CPUFREQ_POSTCHANGE	(1)
-#define CPUFREQ_RESUMECHANGE	(8)
-#define CPUFREQ_SUSPENDCHANGE	(9)
-
-struct cpufreq_freqs {
-	unsigned int cpu;	/* cpu nr */
-	unsigned int old;
-	unsigned int new;
-	u8 flags;		/* flags of cpufreq_driver, see below. */
-};
-
-
-/**
- * cpufreq_scale - "old * mult / div" calculation for large values (32-bit-arch safe)
- * @old:   old value
- * @div:   divisor
- * @mult:  multiplier
- *
- *
- *    new = old * mult / div
- */
-static inline unsigned long cpufreq_scale(unsigned long old, u_int div, u_int mult)
-{
-#if BITS_PER_LONG == 32
-
-	u64 result = ((u64) old) * ((u64) mult);
-	do_div(result, div);
-	return (unsigned long) result;
-
-#elif BITS_PER_LONG == 64
-
-	unsigned long result = old * ((u64) mult);
-	result /= div;
-	return result;
-
-#endif
-};
-
-/*********************************************************************
- *                          CPUFREQ GOVERNORS                        *
- *********************************************************************/
-
-#define CPUFREQ_GOV_START  1
-#define CPUFREQ_GOV_STOP   2
-#define CPUFREQ_GOV_LIMITS 3
-
-struct cpufreq_governor {
-	char	name[CPUFREQ_NAME_LEN];
-	int	(*governor)	(struct cpufreq_policy *policy,
-				 unsigned int event);
-	ssize_t	(*show_setspeed)	(struct cpufreq_policy *policy,
-					 char *buf);
-	int	(*store_setspeed)	(struct cpufreq_policy *policy,
-					 unsigned int freq);
-	unsigned int max_transition_latency; /* HW must be able to switch to
-			next freq faster than this value in nano secs or we
-			will fallback to performance governor */
-	struct list_head	governor_list;
-	struct module		*owner;
-};
-
-/*
- * Pass a target to the cpufreq driver.
- */
-extern int cpufreq_driver_target(struct cpufreq_policy *policy,
-				 unsigned int target_freq,
-				 unsigned int relation);
-extern int __cpufreq_driver_target(struct cpufreq_policy *policy,
-				   unsigned int target_freq,
-				   unsigned int relation);
-
-
-extern int __cpufreq_driver_getavg(struct cpufreq_policy *policy,
-				   unsigned int cpu);
-
-int cpufreq_register_governor(struct cpufreq_governor *governor);
-void cpufreq_unregister_governor(struct cpufreq_governor *governor);
-
-
-/*********************************************************************
- *                      CPUFREQ DRIVER INTERFACE                     *
- *********************************************************************/
-
-#define CPUFREQ_RELATION_L 0  /* lowest frequency at or above target */
-#define CPUFREQ_RELATION_H 1  /* highest frequency below or at target */
-
-struct freq_attr;
-
-struct cpufreq_driver {
-	struct module           *owner;
-	char			name[CPUFREQ_NAME_LEN];
-	u8			flags;
-
-	/* needed by all drivers */
-	int	(*init)		(struct cpufreq_policy *policy);
-	int	(*verify)	(struct cpufreq_policy *policy);
-
-	/* define one out of two */
-	int	(*setpolicy)	(struct cpufreq_policy *policy);
-	int	(*target)	(struct cpufreq_policy *policy,
-				 unsigned int target_freq,
-				 unsigned int relation);
-
-	/* should be defined, if possible */
-	unsigned int	(*get)	(unsigned int cpu);
-
-	/* optional */
-	unsigned int (*getavg)	(struct cpufreq_policy *policy,
-				 unsigned int cpu);
-	int	(*bios_limit)	(int cpu, unsigned int *limit);
-
-	int	(*exit)		(struct cpufreq_policy *policy);
-	int	(*suspend)	(struct cpufreq_policy *policy);
-	int	(*resume)	(struct cpufreq_policy *policy);
-	struct freq_attr	**attr;
-};
-
-/* flags */
-
-#define CPUFREQ_STICKY		0x01	/* the driver isn't removed even if
-					 * all ->init() calls failed */
-#define CPUFREQ_CONST_LOOPS	0x02	/* loops_per_jiffy or other kernel
-					 * "constants" aren't affected by
-					 * frequency transitions */
-#define CPUFREQ_PM_NO_WARN	0x04	/* don't warn on suspend/resume speed
-					 * mismatches */
-
-int cpufreq_register_driver(struct cpufreq_driver *driver_data);
-int cpufreq_unregister_driver(struct cpufreq_driver *driver_data);
-
-
-void cpufreq_notify_transition(struct cpufreq_freqs *freqs, unsigned int state);
-
-
-static inline void cpufreq_verify_within_limits(struct cpufreq_policy *policy, unsigned int min, unsigned int max)
-{
-	if (policy->min < min)
-		policy->min = min;
-	if (policy->max < min)
-		policy->max = min;
-	if (policy->min > max)
-		policy->min = max;
-	if (policy->max > max)
-		policy->max = max;
-	if (policy->min > policy->max)
-		policy->min = policy->max;
-	return;
-}
-
-struct freq_attr {
-	struct attribute attr;
-	ssize_t (*show)(struct cpufreq_policy *, char *);
-	ssize_t (*store)(struct cpufreq_policy *, const char *, size_t count);
-};
-
-#define cpufreq_freq_attr_ro(_name)		\
-static struct freq_attr _name =			\
-__ATTR(_name, 0444, show_##_name, NULL)
-
-#define cpufreq_freq_attr_ro_perm(_name, _perm)	\
-static struct freq_attr _name =			\
-__ATTR(_name, _perm, show_##_name, NULL)
-
-#define cpufreq_freq_attr_rw(_name)		\
-static struct freq_attr _name =			\
-__ATTR(_name, 0644, show_##_name, store_##_name)
-
-struct global_attr {
-	struct attribute attr;
-	ssize_t (*show)(struct kobject *kobj,
-			struct attribute *attr, char *buf);
-	ssize_t (*store)(struct kobject *a, struct attribute *b,
-			 const char *c, size_t count);
-};
-
-#define define_one_global_ro(_name)		\
-static struct global_attr _name =		\
-__ATTR(_name, 0444, show_##_name, NULL)
-
-#define define_one_global_rw(_name)		\
-static struct global_attr _name =		\
-__ATTR(_name, 0644, show_##_name, store_##_name)
-
-
-/*********************************************************************
- *                        CPUFREQ 2.6. INTERFACE                     *
- *********************************************************************/
-int cpufreq_get_policy(struct cpufreq_policy *policy, unsigned int cpu);
-int cpufreq_update_policy(unsigned int cpu);
-
-#ifdef CONFIG_CPU_FREQ
-/* query the current CPU frequency (in kHz). If zero, cpufreq couldn't detect it */
-unsigned int cpufreq_get(unsigned int cpu);
-#else
-static inline unsigned int cpufreq_get(unsigned int cpu)
-{
-	return 0;
-}
-#endif
-
-/* query the last known CPU freq (in kHz). If zero, cpufreq couldn't detect it */
-#ifdef CONFIG_CPU_FREQ
-unsigned int cpufreq_quick_get(unsigned int cpu);
-unsigned int cpufreq_quick_get_max(unsigned int cpu);
-#else
-static inline unsigned int cpufreq_quick_get(unsigned int cpu)
-{
-	return 0;
-}
-static inline unsigned int cpufreq_quick_get_max(unsigned int cpu)
-{
-	return 0;
-}
-#endif
-
-
-/*********************************************************************
- *                       CPUFREQ DEFAULT GOVERNOR                    *
- *********************************************************************/
-
-
-/*
-  Performance governor is fallback governor if any other gov failed to
-  auto load due latency restrictions
-*/
-#ifdef CONFIG_CPU_FREQ_GOV_PERFORMANCE
-extern struct cpufreq_governor cpufreq_gov_performance;
-#endif
-#ifdef CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE
-#define CPUFREQ_DEFAULT_GOVERNOR	(&cpufreq_gov_performance)
-#elif defined(CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE)
-extern struct cpufreq_governor cpufreq_gov_powersave;
-#define CPUFREQ_DEFAULT_GOVERNOR	(&cpufreq_gov_powersave)
-#elif defined(CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE)
-extern struct cpufreq_governor cpufreq_gov_userspace;
-#define CPUFREQ_DEFAULT_GOVERNOR	(&cpufreq_gov_userspace)
-#elif defined(CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND)
-extern struct cpufreq_governor cpufreq_gov_ondemand;
-#define CPUFREQ_DEFAULT_GOVERNOR	(&cpufreq_gov_ondemand)
-#elif defined(CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE)
-extern struct cpufreq_governor cpufreq_gov_conservative;
-#define CPUFREQ_DEFAULT_GOVERNOR	(&cpufreq_gov_conservative)
-#elif defined(CONFIG_CPU_FREQ_DEFAULT_GOV_INTERACTIVE)
-extern struct cpufreq_governor cpufreq_gov_interactive;
-#define CPUFREQ_DEFAULT_GOVERNOR	(&cpufreq_gov_interactive)
-#endif
-
-
-/*********************************************************************
- *                     FREQUENCY TABLE HELPERS                       *
- *********************************************************************/
-
-#define CPUFREQ_ENTRY_INVALID ~0
-#define CPUFREQ_TABLE_END     ~1
-
-struct cpufreq_frequency_table {
-	unsigned int	index;     /* any */
-	unsigned int	frequency; /* kHz - doesn't need to be in ascending
-				    * order */
-};
-
-int cpufreq_frequency_table_cpuinfo(struct cpufreq_policy *policy,
-				    struct cpufreq_frequency_table *table);
-
-int cpufreq_frequency_table_verify(struct cpufreq_policy *policy,
-				   struct cpufreq_frequency_table *table);
-
-int cpufreq_frequency_table_target(struct cpufreq_policy *policy,
-				   struct cpufreq_frequency_table *table,
-				   unsigned int target_freq,
-				   unsigned int relation,
-				   unsigned int *index);
-
-/* the following 3 funtions are for cpufreq core use only */
-struct cpufreq_frequency_table *cpufreq_frequency_get_table(unsigned int cpu);
-struct cpufreq_policy *cpufreq_cpu_get(unsigned int cpu);
-void   cpufreq_cpu_put(struct cpufreq_policy *data);
-
-/* the following are really really optional */
-extern struct freq_attr cpufreq_freq_attr_scaling_available_freqs;
-
-void cpufreq_frequency_table_get_attr(struct cpufreq_frequency_table *table,
-				      unsigned int cpu);
-
-void cpufreq_frequency_table_put_attr(unsigned int cpu);
-
-
-#endif /* _LINUX_CPUFREQ_H */
diff --git a/ANDROID_3.4.5/include/linux/cpuidle.h b/ANDROID_3.4.5/include/linux/cpuidle.h
deleted file mode 100644
index 5ab71833..00000000
--- a/ANDROID_3.4.5/include/linux/cpuidle.h
+++ /dev/null
@@ -1,237 +0,0 @@
-/*
- * cpuidle.h - a generic framework for CPU idle power management
- *
- * (C) 2007 Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
- *          Shaohua Li <shaohua.li@intel.com>
- *          Adam Belay <abelay@novell.com>
- *
- * This code is licenced under the GPL.
- */
-
-#ifndef _LINUX_CPUIDLE_H
-#define _LINUX_CPUIDLE_H
-
-#include <linux/percpu.h>
-#include <linux/list.h>
-#include <linux/kobject.h>
-#include <linux/completion.h>
-#include <linux/hrtimer.h>
-
-#define CPUIDLE_STATE_MAX	8
-#define CPUIDLE_NAME_LEN	16
-#define CPUIDLE_DESC_LEN	32
-
-struct module;
-
-struct cpuidle_device;
-struct cpuidle_driver;
-
-
-/****************************
- * CPUIDLE DEVICE INTERFACE *
- ****************************/
-
-struct cpuidle_state_usage {
-	void		*driver_data;
-
-	unsigned long long	usage;
-	unsigned long long	time; /* in US */
-};
-
-struct cpuidle_state {
-	char		name[CPUIDLE_NAME_LEN];
-	char		desc[CPUIDLE_DESC_LEN];
-
-	unsigned int	flags;
-	unsigned int	exit_latency; /* in US */
-	int		power_usage; /* in mW */
-	unsigned int	target_residency; /* in US */
-	unsigned int    disable;
-
-	int (*enter)	(struct cpuidle_device *dev,
-			struct cpuidle_driver *drv,
-			int index);
-
-	int (*enter_dead) (struct cpuidle_device *dev, int index);
-};
-
-/* Idle State Flags */
-#define CPUIDLE_FLAG_TIME_VALID	(0x01) /* is residency time measurable? */
-#define CPUIDLE_FLAG_COUPLED	(0x02) /* state applies to multiple cpus */
-
-#define CPUIDLE_DRIVER_FLAGS_MASK (0xFFFF0000)
-
-/**
- * cpuidle_get_statedata - retrieves private driver state data
- * @st_usage: the state usage statistics
- */
-static inline void *cpuidle_get_statedata(struct cpuidle_state_usage *st_usage)
-{
-	return st_usage->driver_data;
-}
-
-/**
- * cpuidle_set_statedata - stores private driver state data
- * @st_usage: the state usage statistics
- * @data: the private data
- */
-static inline void
-cpuidle_set_statedata(struct cpuidle_state_usage *st_usage, void *data)
-{
-	st_usage->driver_data = data;
-}
-
-struct cpuidle_state_kobj {
-	struct cpuidle_state *state;
-	struct cpuidle_state_usage *state_usage;
-	struct completion kobj_unregister;
-	struct kobject kobj;
-};
-
-struct cpuidle_device {
-	unsigned int		registered:1;
-	unsigned int		enabled:1;
-	unsigned int		cpu;
-
-	int			last_residency;
-	int			state_count;
-	struct cpuidle_state_usage	states_usage[CPUIDLE_STATE_MAX];
-	struct cpuidle_state_kobj *kobjs[CPUIDLE_STATE_MAX];
-
-	struct list_head 	device_list;
-	struct kobject		kobj;
-	struct completion	kobj_unregister;
-
-#ifdef CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED
-	int			safe_state_index;
-	cpumask_t		coupled_cpus;
-	struct cpuidle_coupled	*coupled;
-#endif
-};
-
-DECLARE_PER_CPU(struct cpuidle_device *, cpuidle_devices);
-
-/**
- * cpuidle_get_last_residency - retrieves the last state's residency time
- * @dev: the target CPU
- *
- * NOTE: this value is invalid if CPUIDLE_FLAG_TIME_VALID isn't set
- */
-static inline int cpuidle_get_last_residency(struct cpuidle_device *dev)
-{
-	return dev->last_residency;
-}
-
-
-/****************************
- * CPUIDLE DRIVER INTERFACE *
- ****************************/
-
-struct cpuidle_driver {
-	const char		*name;
-	struct module 		*owner;
-
-	unsigned int		power_specified:1;
-	/* set to 1 to use the core cpuidle time keeping (for all states). */
-	unsigned int		en_core_tk_irqen:1;
-	struct cpuidle_state	states[CPUIDLE_STATE_MAX];
-	int			state_count;
-	int			safe_state_index;
-};
-
-#ifdef CONFIG_CPU_IDLE
-extern void disable_cpuidle(void);
-extern int cpuidle_idle_call(void);
-extern int cpuidle_register_driver(struct cpuidle_driver *drv);
-struct cpuidle_driver *cpuidle_get_driver(void);
-extern void cpuidle_unregister_driver(struct cpuidle_driver *drv);
-extern int cpuidle_register_device(struct cpuidle_device *dev);
-extern void cpuidle_unregister_device(struct cpuidle_device *dev);
-
-extern void cpuidle_pause_and_lock(void);
-extern void cpuidle_resume_and_unlock(void);
-extern int cpuidle_enable_device(struct cpuidle_device *dev);
-extern void cpuidle_disable_device(struct cpuidle_device *dev);
-extern int cpuidle_wrap_enter(struct cpuidle_device *dev,
-				struct cpuidle_driver *drv, int index,
-				int (*enter)(struct cpuidle_device *dev,
-					struct cpuidle_driver *drv, int index));
-extern int cpuidle_play_dead(void);
-
-#else
-static inline void disable_cpuidle(void) { }
-static inline int cpuidle_idle_call(void) { return -ENODEV; }
-static inline int cpuidle_register_driver(struct cpuidle_driver *drv)
-{return -ENODEV; }
-static inline struct cpuidle_driver *cpuidle_get_driver(void) {return NULL; }
-static inline void cpuidle_unregister_driver(struct cpuidle_driver *drv) { }
-static inline int cpuidle_register_device(struct cpuidle_device *dev)
-{return -ENODEV; }
-static inline void cpuidle_unregister_device(struct cpuidle_device *dev) { }
-
-static inline void cpuidle_pause_and_lock(void) { }
-static inline void cpuidle_resume_and_unlock(void) { }
-static inline int cpuidle_enable_device(struct cpuidle_device *dev)
-{return -ENODEV; }
-static inline void cpuidle_disable_device(struct cpuidle_device *dev) { }
-static inline int cpuidle_wrap_enter(struct cpuidle_device *dev,
-				struct cpuidle_driver *drv, int index,
-				int (*enter)(struct cpuidle_device *dev,
-					struct cpuidle_driver *drv, int index))
-{ return -ENODEV; }
-static inline int cpuidle_play_dead(void) {return -ENODEV; }
-
-#endif
-
-#ifdef CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED
-void cpuidle_coupled_parallel_barrier(struct cpuidle_device *dev, atomic_t *a);
-#endif
-
-/******************************
- * CPUIDLE GOVERNOR INTERFACE *
- ******************************/
-
-struct cpuidle_governor {
-	char			name[CPUIDLE_NAME_LEN];
-	struct list_head 	governor_list;
-	unsigned int		rating;
-
-	int  (*enable)		(struct cpuidle_driver *drv,
-					struct cpuidle_device *dev);
-	void (*disable)		(struct cpuidle_driver *drv,
-					struct cpuidle_device *dev);
-
-	int  (*select)		(struct cpuidle_driver *drv,
-					struct cpuidle_device *dev);
-	void (*reflect)		(struct cpuidle_device *dev, int index);
-
-	struct module 		*owner;
-};
-
-#ifdef CONFIG_CPU_IDLE
-
-extern int cpuidle_register_governor(struct cpuidle_governor *gov);
-extern void cpuidle_unregister_governor(struct cpuidle_governor *gov);
-
-#ifdef CONFIG_INTEL_IDLE
-extern int intel_idle_cpu_init(int cpu);
-#else
-static inline int intel_idle_cpu_init(int cpu) { return -1; }
-#endif
-
-#else
-static inline int intel_idle_cpu_init(int cpu) { return -1; }
-
-static inline int cpuidle_register_governor(struct cpuidle_governor *gov)
-{return 0;}
-static inline void cpuidle_unregister_governor(struct cpuidle_governor *gov) { }
-
-#endif
-
-#ifdef CONFIG_ARCH_HAS_CPU_RELAX
-#define CPUIDLE_DRIVER_STATE_START	1
-#else
-#define CPUIDLE_DRIVER_STATE_START	0
-#endif
-
-#endif /* _LINUX_CPUIDLE_H */
diff --git a/ANDROID_3.4.5/include/linux/cpumask.h b/ANDROID_3.4.5/include/linux/cpumask.h
deleted file mode 100644
index a2c819d3..00000000
--- a/ANDROID_3.4.5/include/linux/cpumask.h
+++ /dev/null
@@ -1,937 +0,0 @@
-#ifndef __LINUX_CPUMASK_H
-#define __LINUX_CPUMASK_H
-
-/*
- * Cpumasks provide a bitmap suitable for representing the
- * set of CPU's in a system, one bit position per CPU number.  In general,
- * only nr_cpu_ids (<= NR_CPUS) bits are valid.
- */
-#include <linux/kernel.h>
-#include <linux/threads.h>
-#include <linux/bitmap.h>
-#include <linux/bug.h>
-
-typedef struct cpumask { DECLARE_BITMAP(bits, NR_CPUS); } cpumask_t;
-
-/**
- * cpumask_bits - get the bits in a cpumask
- * @maskp: the struct cpumask *
- *
- * You should only assume nr_cpu_ids bits of this mask are valid.  This is
- * a macro so it's const-correct.
- */
-#define cpumask_bits(maskp) ((maskp)->bits)
-
-#if NR_CPUS == 1
-#define nr_cpu_ids		1
-#else
-extern int nr_cpu_ids;
-#endif
-
-#ifdef CONFIG_CPUMASK_OFFSTACK
-/* Assuming NR_CPUS is huge, a runtime limit is more efficient.  Also,
- * not all bits may be allocated. */
-#define nr_cpumask_bits	nr_cpu_ids
-#else
-#define nr_cpumask_bits	NR_CPUS
-#endif
-
-/*
- * The following particular system cpumasks and operations manage
- * possible, present, active and online cpus.
- *
- *     cpu_possible_mask- has bit 'cpu' set iff cpu is populatable
- *     cpu_present_mask - has bit 'cpu' set iff cpu is populated
- *     cpu_online_mask  - has bit 'cpu' set iff cpu available to scheduler
- *     cpu_active_mask  - has bit 'cpu' set iff cpu available to migration
- *
- *  If !CONFIG_HOTPLUG_CPU, present == possible, and active == online.
- *
- *  The cpu_possible_mask is fixed at boot time, as the set of CPU id's
- *  that it is possible might ever be plugged in at anytime during the
- *  life of that system boot.  The cpu_present_mask is dynamic(*),
- *  representing which CPUs are currently plugged in.  And
- *  cpu_online_mask is the dynamic subset of cpu_present_mask,
- *  indicating those CPUs available for scheduling.
- *
- *  If HOTPLUG is enabled, then cpu_possible_mask is forced to have
- *  all NR_CPUS bits set, otherwise it is just the set of CPUs that
- *  ACPI reports present at boot.
- *
- *  If HOTPLUG is enabled, then cpu_present_mask varies dynamically,
- *  depending on what ACPI reports as currently plugged in, otherwise
- *  cpu_present_mask is just a copy of cpu_possible_mask.
- *
- *  (*) Well, cpu_present_mask is dynamic in the hotplug case.  If not
- *      hotplug, it's a copy of cpu_possible_mask, hence fixed at boot.
- *
- * Subtleties:
- * 1) UP arch's (NR_CPUS == 1, CONFIG_SMP not defined) hardcode
- *    assumption that their single CPU is online.  The UP
- *    cpu_{online,possible,present}_masks are placebos.  Changing them
- *    will have no useful affect on the following num_*_cpus()
- *    and cpu_*() macros in the UP case.  This ugliness is a UP
- *    optimization - don't waste any instructions or memory references
- *    asking if you're online or how many CPUs there are if there is
- *    only one CPU.
- */
-
-extern const struct cpumask *const cpu_possible_mask;
-extern const struct cpumask *const cpu_online_mask;
-extern const struct cpumask *const cpu_present_mask;
-extern const struct cpumask *const cpu_active_mask;
-
-#if NR_CPUS > 1
-#define num_online_cpus()	cpumask_weight(cpu_online_mask)
-#define num_possible_cpus()	cpumask_weight(cpu_possible_mask)
-#define num_present_cpus()	cpumask_weight(cpu_present_mask)
-#define num_active_cpus()	cpumask_weight(cpu_active_mask)
-#define cpu_online(cpu)		cpumask_test_cpu((cpu), cpu_online_mask)
-#define cpu_possible(cpu)	cpumask_test_cpu((cpu), cpu_possible_mask)
-#define cpu_present(cpu)	cpumask_test_cpu((cpu), cpu_present_mask)
-#define cpu_active(cpu)		cpumask_test_cpu((cpu), cpu_active_mask)
-#else
-#define num_online_cpus()	1U
-#define num_possible_cpus()	1U
-#define num_present_cpus()	1U
-#define num_active_cpus()	1U
-#define cpu_online(cpu)		((cpu) == 0)
-#define cpu_possible(cpu)	((cpu) == 0)
-#define cpu_present(cpu)	((cpu) == 0)
-#define cpu_active(cpu)		((cpu) == 0)
-#endif
-
-/* verify cpu argument to cpumask_* operators */
-static inline unsigned int cpumask_check(unsigned int cpu)
-{
-#ifdef CONFIG_DEBUG_PER_CPU_MAPS
-	WARN_ON_ONCE(cpu >= nr_cpumask_bits);
-#endif /* CONFIG_DEBUG_PER_CPU_MAPS */
-	return cpu;
-}
-
-#if NR_CPUS == 1
-/* Uniprocessor.  Assume all masks are "1". */
-static inline unsigned int cpumask_first(const struct cpumask *srcp)
-{
-	return 0;
-}
-
-/* Valid inputs for n are -1 and 0. */
-static inline unsigned int cpumask_next(int n, const struct cpumask *srcp)
-{
-	return n+1;
-}
-
-static inline unsigned int cpumask_next_zero(int n, const struct cpumask *srcp)
-{
-	return n+1;
-}
-
-static inline unsigned int cpumask_next_and(int n,
-					    const struct cpumask *srcp,
-					    const struct cpumask *andp)
-{
-	return n+1;
-}
-
-/* cpu must be a valid cpu, ie 0, so there's no other choice. */
-static inline unsigned int cpumask_any_but(const struct cpumask *mask,
-					   unsigned int cpu)
-{
-	return 1;
-}
-
-#define for_each_cpu(cpu, mask)			\
-	for ((cpu) = 0; (cpu) < 1; (cpu)++, (void)mask)
-#define for_each_cpu_not(cpu, mask)		\
-	for ((cpu) = 0; (cpu) < 1; (cpu)++, (void)mask)
-#define for_each_cpu_and(cpu, mask, and)	\
-	for ((cpu) = 0; (cpu) < 1; (cpu)++, (void)mask, (void)and)
-#else
-/**
- * cpumask_first - get the first cpu in a cpumask
- * @srcp: the cpumask pointer
- *
- * Returns >= nr_cpu_ids if no cpus set.
- */
-static inline unsigned int cpumask_first(const struct cpumask *srcp)
-{
-	return find_first_bit(cpumask_bits(srcp), nr_cpumask_bits);
-}
-
-/**
- * cpumask_next - get the next cpu in a cpumask
- * @n: the cpu prior to the place to search (ie. return will be > @n)
- * @srcp: the cpumask pointer
- *
- * Returns >= nr_cpu_ids if no further cpus set.
- */
-static inline unsigned int cpumask_next(int n, const struct cpumask *srcp)
-{
-	/* -1 is a legal arg here. */
-	if (n != -1)
-		cpumask_check(n);
-	return find_next_bit(cpumask_bits(srcp), nr_cpumask_bits, n+1);
-}
-
-/**
- * cpumask_next_zero - get the next unset cpu in a cpumask
- * @n: the cpu prior to the place to search (ie. return will be > @n)
- * @srcp: the cpumask pointer
- *
- * Returns >= nr_cpu_ids if no further cpus unset.
- */
-static inline unsigned int cpumask_next_zero(int n, const struct cpumask *srcp)
-{
-	/* -1 is a legal arg here. */
-	if (n != -1)
-		cpumask_check(n);
-	return find_next_zero_bit(cpumask_bits(srcp), nr_cpumask_bits, n+1);
-}
-
-int cpumask_next_and(int n, const struct cpumask *, const struct cpumask *);
-int cpumask_any_but(const struct cpumask *mask, unsigned int cpu);
-
-/**
- * for_each_cpu - iterate over every cpu in a mask
- * @cpu: the (optionally unsigned) integer iterator
- * @mask: the cpumask pointer
- *
- * After the loop, cpu is >= nr_cpu_ids.
- */
-#define for_each_cpu(cpu, mask)				\
-	for ((cpu) = -1;				\
-		(cpu) = cpumask_next((cpu), (mask)),	\
-		(cpu) < nr_cpu_ids;)
-
-/**
- * for_each_cpu_not - iterate over every cpu in a complemented mask
- * @cpu: the (optionally unsigned) integer iterator
- * @mask: the cpumask pointer
- *
- * After the loop, cpu is >= nr_cpu_ids.
- */
-#define for_each_cpu_not(cpu, mask)				\
-	for ((cpu) = -1;					\
-		(cpu) = cpumask_next_zero((cpu), (mask)),	\
-		(cpu) < nr_cpu_ids;)
-
-/**
- * for_each_cpu_and - iterate over every cpu in both masks
- * @cpu: the (optionally unsigned) integer iterator
- * @mask: the first cpumask pointer
- * @and: the second cpumask pointer
- *
- * This saves a temporary CPU mask in many places.  It is equivalent to:
- *	struct cpumask tmp;
- *	cpumask_and(&tmp, &mask, &and);
- *	for_each_cpu(cpu, &tmp)
- *		...
- *
- * After the loop, cpu is >= nr_cpu_ids.
- */
-#define for_each_cpu_and(cpu, mask, and)				\
-	for ((cpu) = -1;						\
-		(cpu) = cpumask_next_and((cpu), (mask), (and)),		\
-		(cpu) < nr_cpu_ids;)
-#endif /* SMP */
-
-#define CPU_BITS_NONE						\
-{								\
-	[0 ... BITS_TO_LONGS(NR_CPUS)-1] = 0UL			\
-}
-
-#define CPU_BITS_CPU0						\
-{								\
-	[0] =  1UL						\
-}
-
-/**
- * cpumask_set_cpu - set a cpu in a cpumask
- * @cpu: cpu number (< nr_cpu_ids)
- * @dstp: the cpumask pointer
- */
-static inline void cpumask_set_cpu(unsigned int cpu, struct cpumask *dstp)
-{
-	set_bit(cpumask_check(cpu), cpumask_bits(dstp));
-}
-
-/**
- * cpumask_clear_cpu - clear a cpu in a cpumask
- * @cpu: cpu number (< nr_cpu_ids)
- * @dstp: the cpumask pointer
- */
-static inline void cpumask_clear_cpu(int cpu, struct cpumask *dstp)
-{
-	clear_bit(cpumask_check(cpu), cpumask_bits(dstp));
-}
-
-/**
- * cpumask_test_cpu - test for a cpu in a cpumask
- * @cpu: cpu number (< nr_cpu_ids)
- * @cpumask: the cpumask pointer
- *
- * No static inline type checking - see Subtlety (1) above.
- */
-#define cpumask_test_cpu(cpu, cpumask) \
-	test_bit(cpumask_check(cpu), cpumask_bits((cpumask)))
-
-/**
- * cpumask_test_and_set_cpu - atomically test and set a cpu in a cpumask
- * @cpu: cpu number (< nr_cpu_ids)
- * @cpumask: the cpumask pointer
- *
- * test_and_set_bit wrapper for cpumasks.
- */
-static inline int cpumask_test_and_set_cpu(int cpu, struct cpumask *cpumask)
-{
-	return test_and_set_bit(cpumask_check(cpu), cpumask_bits(cpumask));
-}
-
-/**
- * cpumask_test_and_clear_cpu - atomically test and clear a cpu in a cpumask
- * @cpu: cpu number (< nr_cpu_ids)
- * @cpumask: the cpumask pointer
- *
- * test_and_clear_bit wrapper for cpumasks.
- */
-static inline int cpumask_test_and_clear_cpu(int cpu, struct cpumask *cpumask)
-{
-	return test_and_clear_bit(cpumask_check(cpu), cpumask_bits(cpumask));
-}
-
-/**
- * cpumask_setall - set all cpus (< nr_cpu_ids) in a cpumask
- * @dstp: the cpumask pointer
- */
-static inline void cpumask_setall(struct cpumask *dstp)
-{
-	bitmap_fill(cpumask_bits(dstp), nr_cpumask_bits);
-}
-
-/**
- * cpumask_clear - clear all cpus (< nr_cpu_ids) in a cpumask
- * @dstp: the cpumask pointer
- */
-static inline void cpumask_clear(struct cpumask *dstp)
-{
-	bitmap_zero(cpumask_bits(dstp), nr_cpumask_bits);
-}
-
-/**
- * cpumask_and - *dstp = *src1p & *src2p
- * @dstp: the cpumask result
- * @src1p: the first input
- * @src2p: the second input
- */
-static inline int cpumask_and(struct cpumask *dstp,
-			       const struct cpumask *src1p,
-			       const struct cpumask *src2p)
-{
-	return bitmap_and(cpumask_bits(dstp), cpumask_bits(src1p),
-				       cpumask_bits(src2p), nr_cpumask_bits);
-}
-
-/**
- * cpumask_or - *dstp = *src1p | *src2p
- * @dstp: the cpumask result
- * @src1p: the first input
- * @src2p: the second input
- */
-static inline void cpumask_or(struct cpumask *dstp, const struct cpumask *src1p,
-			      const struct cpumask *src2p)
-{
-	bitmap_or(cpumask_bits(dstp), cpumask_bits(src1p),
-				      cpumask_bits(src2p), nr_cpumask_bits);
-}
-
-/**
- * cpumask_xor - *dstp = *src1p ^ *src2p
- * @dstp: the cpumask result
- * @src1p: the first input
- * @src2p: the second input
- */
-static inline void cpumask_xor(struct cpumask *dstp,
-			       const struct cpumask *src1p,
-			       const struct cpumask *src2p)
-{
-	bitmap_xor(cpumask_bits(dstp), cpumask_bits(src1p),
-				       cpumask_bits(src2p), nr_cpumask_bits);
-}
-
-/**
- * cpumask_andnot - *dstp = *src1p & ~*src2p
- * @dstp: the cpumask result
- * @src1p: the first input
- * @src2p: the second input
- */
-static inline int cpumask_andnot(struct cpumask *dstp,
-				  const struct cpumask *src1p,
-				  const struct cpumask *src2p)
-{
-	return bitmap_andnot(cpumask_bits(dstp), cpumask_bits(src1p),
-					  cpumask_bits(src2p), nr_cpumask_bits);
-}
-
-/**
- * cpumask_complement - *dstp = ~*srcp
- * @dstp: the cpumask result
- * @srcp: the input to invert
- */
-static inline void cpumask_complement(struct cpumask *dstp,
-				      const struct cpumask *srcp)
-{
-	bitmap_complement(cpumask_bits(dstp), cpumask_bits(srcp),
-					      nr_cpumask_bits);
-}
-
-/**
- * cpumask_equal - *src1p == *src2p
- * @src1p: the first input
- * @src2p: the second input
- */
-static inline bool cpumask_equal(const struct cpumask *src1p,
-				const struct cpumask *src2p)
-{
-	return bitmap_equal(cpumask_bits(src1p), cpumask_bits(src2p),
-						 nr_cpumask_bits);
-}
-
-/**
- * cpumask_intersects - (*src1p & *src2p) != 0
- * @src1p: the first input
- * @src2p: the second input
- */
-static inline bool cpumask_intersects(const struct cpumask *src1p,
-				     const struct cpumask *src2p)
-{
-	return bitmap_intersects(cpumask_bits(src1p), cpumask_bits(src2p),
-						      nr_cpumask_bits);
-}
-
-/**
- * cpumask_subset - (*src1p & ~*src2p) == 0
- * @src1p: the first input
- * @src2p: the second input
- */
-static inline int cpumask_subset(const struct cpumask *src1p,
-				 const struct cpumask *src2p)
-{
-	return bitmap_subset(cpumask_bits(src1p), cpumask_bits(src2p),
-						  nr_cpumask_bits);
-}
-
-/**
- * cpumask_empty - *srcp == 0
- * @srcp: the cpumask to that all cpus < nr_cpu_ids are clear.
- */
-static inline bool cpumask_empty(const struct cpumask *srcp)
-{
-	return bitmap_empty(cpumask_bits(srcp), nr_cpumask_bits);
-}
-
-/**
- * cpumask_full - *srcp == 0xFFFFFFFF...
- * @srcp: the cpumask to that all cpus < nr_cpu_ids are set.
- */
-static inline bool cpumask_full(const struct cpumask *srcp)
-{
-	return bitmap_full(cpumask_bits(srcp), nr_cpumask_bits);
-}
-
-/**
- * cpumask_weight - Count of bits in *srcp
- * @srcp: the cpumask to count bits (< nr_cpu_ids) in.
- */
-static inline unsigned int cpumask_weight(const struct cpumask *srcp)
-{
-	return bitmap_weight(cpumask_bits(srcp), nr_cpumask_bits);
-}
-
-/**
- * cpumask_shift_right - *dstp = *srcp >> n
- * @dstp: the cpumask result
- * @srcp: the input to shift
- * @n: the number of bits to shift by
- */
-static inline void cpumask_shift_right(struct cpumask *dstp,
-				       const struct cpumask *srcp, int n)
-{
-	bitmap_shift_right(cpumask_bits(dstp), cpumask_bits(srcp), n,
-					       nr_cpumask_bits);
-}
-
-/**
- * cpumask_shift_left - *dstp = *srcp << n
- * @dstp: the cpumask result
- * @srcp: the input to shift
- * @n: the number of bits to shift by
- */
-static inline void cpumask_shift_left(struct cpumask *dstp,
-				      const struct cpumask *srcp, int n)
-{
-	bitmap_shift_left(cpumask_bits(dstp), cpumask_bits(srcp), n,
-					      nr_cpumask_bits);
-}
-
-/**
- * cpumask_copy - *dstp = *srcp
- * @dstp: the result
- * @srcp: the input cpumask
- */
-static inline void cpumask_copy(struct cpumask *dstp,
-				const struct cpumask *srcp)
-{
-	bitmap_copy(cpumask_bits(dstp), cpumask_bits(srcp), nr_cpumask_bits);
-}
-
-/**
- * cpumask_any - pick a "random" cpu from *srcp
- * @srcp: the input cpumask
- *
- * Returns >= nr_cpu_ids if no cpus set.
- */
-#define cpumask_any(srcp) cpumask_first(srcp)
-
-/**
- * cpumask_first_and - return the first cpu from *srcp1 & *srcp2
- * @src1p: the first input
- * @src2p: the second input
- *
- * Returns >= nr_cpu_ids if no cpus set in both.  See also cpumask_next_and().
- */
-#define cpumask_first_and(src1p, src2p) cpumask_next_and(-1, (src1p), (src2p))
-
-/**
- * cpumask_any_and - pick a "random" cpu from *mask1 & *mask2
- * @mask1: the first input cpumask
- * @mask2: the second input cpumask
- *
- * Returns >= nr_cpu_ids if no cpus set.
- */
-#define cpumask_any_and(mask1, mask2) cpumask_first_and((mask1), (mask2))
-
-/**
- * cpumask_of - the cpumask containing just a given cpu
- * @cpu: the cpu (<= nr_cpu_ids)
- */
-#define cpumask_of(cpu) (get_cpu_mask(cpu))
-
-/**
- * cpumask_scnprintf - print a cpumask into a string as comma-separated hex
- * @buf: the buffer to sprintf into
- * @len: the length of the buffer
- * @srcp: the cpumask to print
- *
- * If len is zero, returns zero.  Otherwise returns the length of the
- * (nul-terminated) @buf string.
- */
-static inline int cpumask_scnprintf(char *buf, int len,
-				    const struct cpumask *srcp)
-{
-	return bitmap_scnprintf(buf, len, cpumask_bits(srcp), nr_cpumask_bits);
-}
-
-/**
- * cpumask_parse_user - extract a cpumask from a user string
- * @buf: the buffer to extract from
- * @len: the length of the buffer
- * @dstp: the cpumask to set.
- *
- * Returns -errno, or 0 for success.
- */
-static inline int cpumask_parse_user(const char __user *buf, int len,
-				     struct cpumask *dstp)
-{
-	return bitmap_parse_user(buf, len, cpumask_bits(dstp), nr_cpumask_bits);
-}
-
-/**
- * cpumask_parselist_user - extract a cpumask from a user string
- * @buf: the buffer to extract from
- * @len: the length of the buffer
- * @dstp: the cpumask to set.
- *
- * Returns -errno, or 0 for success.
- */
-static inline int cpumask_parselist_user(const char __user *buf, int len,
-				     struct cpumask *dstp)
-{
-	return bitmap_parselist_user(buf, len, cpumask_bits(dstp),
-							nr_cpumask_bits);
-}
-
-/**
- * cpulist_scnprintf - print a cpumask into a string as comma-separated list
- * @buf: the buffer to sprintf into
- * @len: the length of the buffer
- * @srcp: the cpumask to print
- *
- * If len is zero, returns zero.  Otherwise returns the length of the
- * (nul-terminated) @buf string.
- */
-static inline int cpulist_scnprintf(char *buf, int len,
-				    const struct cpumask *srcp)
-{
-	return bitmap_scnlistprintf(buf, len, cpumask_bits(srcp),
-				    nr_cpumask_bits);
-}
-
-/**
- * cpulist_parse_user - extract a cpumask from a user string of ranges
- * @buf: the buffer to extract from
- * @len: the length of the buffer
- * @dstp: the cpumask to set.
- *
- * Returns -errno, or 0 for success.
- */
-static inline int cpulist_parse(const char *buf, struct cpumask *dstp)
-{
-	return bitmap_parselist(buf, cpumask_bits(dstp), nr_cpumask_bits);
-}
-
-/**
- * cpumask_size - size to allocate for a 'struct cpumask' in bytes
- *
- * This will eventually be a runtime variable, depending on nr_cpu_ids.
- */
-static inline size_t cpumask_size(void)
-{
-	/* FIXME: Once all cpumask assignments are eliminated, this
-	 * can be nr_cpumask_bits */
-	return BITS_TO_LONGS(NR_CPUS) * sizeof(long);
-}
-
-/*
- * cpumask_var_t: struct cpumask for stack usage.
- *
- * Oh, the wicked games we play!  In order to make kernel coding a
- * little more difficult, we typedef cpumask_var_t to an array or a
- * pointer: doing &mask on an array is a noop, so it still works.
- *
- * ie.
- *	cpumask_var_t tmpmask;
- *	if (!alloc_cpumask_var(&tmpmask, GFP_KERNEL))
- *		return -ENOMEM;
- *
- *	  ... use 'tmpmask' like a normal struct cpumask * ...
- *
- *	free_cpumask_var(tmpmask);
- *
- *
- * However, one notable exception is there. alloc_cpumask_var() allocates
- * only nr_cpumask_bits bits (in the other hand, real cpumask_t always has
- * NR_CPUS bits). Therefore you don't have to dereference cpumask_var_t.
- *
- *	cpumask_var_t tmpmask;
- *	if (!alloc_cpumask_var(&tmpmask, GFP_KERNEL))
- *		return -ENOMEM;
- *
- *	var = *tmpmask;
- *
- * This code makes NR_CPUS length memcopy and brings to a memory corruption.
- * cpumask_copy() provide safe copy functionality.
- */
-#ifdef CONFIG_CPUMASK_OFFSTACK
-typedef struct cpumask *cpumask_var_t;
-
-bool alloc_cpumask_var_node(cpumask_var_t *mask, gfp_t flags, int node);
-bool alloc_cpumask_var(cpumask_var_t *mask, gfp_t flags);
-bool zalloc_cpumask_var_node(cpumask_var_t *mask, gfp_t flags, int node);
-bool zalloc_cpumask_var(cpumask_var_t *mask, gfp_t flags);
-void alloc_bootmem_cpumask_var(cpumask_var_t *mask);
-void free_cpumask_var(cpumask_var_t mask);
-void free_bootmem_cpumask_var(cpumask_var_t mask);
-
-#else
-typedef struct cpumask cpumask_var_t[1];
-
-static inline bool alloc_cpumask_var(cpumask_var_t *mask, gfp_t flags)
-{
-	return true;
-}
-
-static inline bool alloc_cpumask_var_node(cpumask_var_t *mask, gfp_t flags,
-					  int node)
-{
-	return true;
-}
-
-static inline bool zalloc_cpumask_var(cpumask_var_t *mask, gfp_t flags)
-{
-	cpumask_clear(*mask);
-	return true;
-}
-
-static inline bool zalloc_cpumask_var_node(cpumask_var_t *mask, gfp_t flags,
-					  int node)
-{
-	cpumask_clear(*mask);
-	return true;
-}
-
-static inline void alloc_bootmem_cpumask_var(cpumask_var_t *mask)
-{
-}
-
-static inline void free_cpumask_var(cpumask_var_t mask)
-{
-}
-
-static inline void free_bootmem_cpumask_var(cpumask_var_t mask)
-{
-}
-#endif /* CONFIG_CPUMASK_OFFSTACK */
-
-/* It's common to want to use cpu_all_mask in struct member initializers,
- * so it has to refer to an address rather than a pointer. */
-extern const DECLARE_BITMAP(cpu_all_bits, NR_CPUS);
-#define cpu_all_mask to_cpumask(cpu_all_bits)
-
-/* First bits of cpu_bit_bitmap are in fact unset. */
-#define cpu_none_mask to_cpumask(cpu_bit_bitmap[0])
-
-#define for_each_possible_cpu(cpu) for_each_cpu((cpu), cpu_possible_mask)
-#define for_each_online_cpu(cpu)   for_each_cpu((cpu), cpu_online_mask)
-#define for_each_present_cpu(cpu)  for_each_cpu((cpu), cpu_present_mask)
-
-/* Wrappers for arch boot code to manipulate normally-constant masks */
-void set_cpu_possible(unsigned int cpu, bool possible);
-void set_cpu_present(unsigned int cpu, bool present);
-void set_cpu_online(unsigned int cpu, bool online);
-void set_cpu_active(unsigned int cpu, bool active);
-void init_cpu_present(const struct cpumask *src);
-void init_cpu_possible(const struct cpumask *src);
-void init_cpu_online(const struct cpumask *src);
-
-/**
- * to_cpumask - convert an NR_CPUS bitmap to a struct cpumask *
- * @bitmap: the bitmap
- *
- * There are a few places where cpumask_var_t isn't appropriate and
- * static cpumasks must be used (eg. very early boot), yet we don't
- * expose the definition of 'struct cpumask'.
- *
- * This does the conversion, and can be used as a constant initializer.
- */
-#define to_cpumask(bitmap)						\
-	((struct cpumask *)(1 ? (bitmap)				\
-			    : (void *)sizeof(__check_is_bitmap(bitmap))))
-
-static inline int __check_is_bitmap(const unsigned long *bitmap)
-{
-	return 1;
-}
-
-/*
- * Special-case data structure for "single bit set only" constant CPU masks.
- *
- * We pre-generate all the 64 (or 32) possible bit positions, with enough
- * padding to the left and the right, and return the constant pointer
- * appropriately offset.
- */
-extern const unsigned long
-	cpu_bit_bitmap[BITS_PER_LONG+1][BITS_TO_LONGS(NR_CPUS)];
-
-static inline const struct cpumask *get_cpu_mask(unsigned int cpu)
-{
-	const unsigned long *p = cpu_bit_bitmap[1 + cpu % BITS_PER_LONG];
-	p -= cpu / BITS_PER_LONG;
-	return to_cpumask(p);
-}
-
-#define cpu_is_offline(cpu)	unlikely(!cpu_online(cpu))
-
-#if NR_CPUS <= BITS_PER_LONG
-#define CPU_BITS_ALL						\
-{								\
-	[BITS_TO_LONGS(NR_CPUS)-1] = CPU_MASK_LAST_WORD	\
-}
-
-#else /* NR_CPUS > BITS_PER_LONG */
-
-#define CPU_BITS_ALL						\
-{								\
-	[0 ... BITS_TO_LONGS(NR_CPUS)-2] = ~0UL,		\
-	[BITS_TO_LONGS(NR_CPUS)-1] = CPU_MASK_LAST_WORD		\
-}
-#endif /* NR_CPUS > BITS_PER_LONG */
-
-/*
- *
- * From here down, all obsolete.  Use cpumask_ variants!
- *
- */
-#ifndef CONFIG_DISABLE_OBSOLETE_CPUMASK_FUNCTIONS
-#define cpumask_of_cpu(cpu) (*get_cpu_mask(cpu))
-
-#define CPU_MASK_LAST_WORD BITMAP_LAST_WORD_MASK(NR_CPUS)
-
-#if NR_CPUS <= BITS_PER_LONG
-
-#define CPU_MASK_ALL							\
-(cpumask_t) { {								\
-	[BITS_TO_LONGS(NR_CPUS)-1] = CPU_MASK_LAST_WORD			\
-} }
-
-#else
-
-#define CPU_MASK_ALL							\
-(cpumask_t) { {								\
-	[0 ... BITS_TO_LONGS(NR_CPUS)-2] = ~0UL,			\
-	[BITS_TO_LONGS(NR_CPUS)-1] = CPU_MASK_LAST_WORD			\
-} }
-
-#endif
-
-#define CPU_MASK_NONE							\
-(cpumask_t) { {								\
-	[0 ... BITS_TO_LONGS(NR_CPUS)-1] =  0UL				\
-} }
-
-#define CPU_MASK_CPU0							\
-(cpumask_t) { {								\
-	[0] =  1UL							\
-} }
-
-#if NR_CPUS == 1
-#define first_cpu(src)		({ (void)(src); 0; })
-#define next_cpu(n, src)	({ (void)(src); 1; })
-#define any_online_cpu(mask)	0
-#define for_each_cpu_mask(cpu, mask)	\
-	for ((cpu) = 0; (cpu) < 1; (cpu)++, (void)mask)
-#else /* NR_CPUS > 1 */
-int __first_cpu(const cpumask_t *srcp);
-int __next_cpu(int n, const cpumask_t *srcp);
-
-#define first_cpu(src)		__first_cpu(&(src))
-#define next_cpu(n, src)	__next_cpu((n), &(src))
-#define any_online_cpu(mask) cpumask_any_and(&mask, cpu_online_mask)
-#define for_each_cpu_mask(cpu, mask)			\
-	for ((cpu) = -1;				\
-		(cpu) = next_cpu((cpu), (mask)),	\
-		(cpu) < NR_CPUS; )
-#endif /* SMP */
-
-#if NR_CPUS <= 64
-
-#define for_each_cpu_mask_nr(cpu, mask)	for_each_cpu_mask(cpu, mask)
-
-#else /* NR_CPUS > 64 */
-
-int __next_cpu_nr(int n, const cpumask_t *srcp);
-#define for_each_cpu_mask_nr(cpu, mask)			\
-	for ((cpu) = -1;				\
-		(cpu) = __next_cpu_nr((cpu), &(mask)),	\
-		(cpu) < nr_cpu_ids; )
-
-#endif /* NR_CPUS > 64 */
-
-#define cpus_addr(src) ((src).bits)
-
-#define cpu_set(cpu, dst) __cpu_set((cpu), &(dst))
-static inline void __cpu_set(int cpu, volatile cpumask_t *dstp)
-{
-	set_bit(cpu, dstp->bits);
-}
-
-#define cpu_clear(cpu, dst) __cpu_clear((cpu), &(dst))
-static inline void __cpu_clear(int cpu, volatile cpumask_t *dstp)
-{
-	clear_bit(cpu, dstp->bits);
-}
-
-#define cpus_setall(dst) __cpus_setall(&(dst), NR_CPUS)
-static inline void __cpus_setall(cpumask_t *dstp, int nbits)
-{
-	bitmap_fill(dstp->bits, nbits);
-}
-
-#define cpus_clear(dst) __cpus_clear(&(dst), NR_CPUS)
-static inline void __cpus_clear(cpumask_t *dstp, int nbits)
-{
-	bitmap_zero(dstp->bits, nbits);
-}
-
-/* No static inline type checking - see Subtlety (1) above. */
-#define cpu_isset(cpu, cpumask) test_bit((cpu), (cpumask).bits)
-
-#define cpu_test_and_set(cpu, cpumask) __cpu_test_and_set((cpu), &(cpumask))
-static inline int __cpu_test_and_set(int cpu, cpumask_t *addr)
-{
-	return test_and_set_bit(cpu, addr->bits);
-}
-
-#define cpus_and(dst, src1, src2) __cpus_and(&(dst), &(src1), &(src2), NR_CPUS)
-static inline int __cpus_and(cpumask_t *dstp, const cpumask_t *src1p,
-					const cpumask_t *src2p, int nbits)
-{
-	return bitmap_and(dstp->bits, src1p->bits, src2p->bits, nbits);
-}
-
-#define cpus_or(dst, src1, src2) __cpus_or(&(dst), &(src1), &(src2), NR_CPUS)
-static inline void __cpus_or(cpumask_t *dstp, const cpumask_t *src1p,
-					const cpumask_t *src2p, int nbits)
-{
-	bitmap_or(dstp->bits, src1p->bits, src2p->bits, nbits);
-}
-
-#define cpus_xor(dst, src1, src2) __cpus_xor(&(dst), &(src1), &(src2), NR_CPUS)
-static inline void __cpus_xor(cpumask_t *dstp, const cpumask_t *src1p,
-					const cpumask_t *src2p, int nbits)
-{
-	bitmap_xor(dstp->bits, src1p->bits, src2p->bits, nbits);
-}
-
-#define cpus_andnot(dst, src1, src2) \
-				__cpus_andnot(&(dst), &(src1), &(src2), NR_CPUS)
-static inline int __cpus_andnot(cpumask_t *dstp, const cpumask_t *src1p,
-					const cpumask_t *src2p, int nbits)
-{
-	return bitmap_andnot(dstp->bits, src1p->bits, src2p->bits, nbits);
-}
-
-#define cpus_equal(src1, src2) __cpus_equal(&(src1), &(src2), NR_CPUS)
-static inline int __cpus_equal(const cpumask_t *src1p,
-					const cpumask_t *src2p, int nbits)
-{
-	return bitmap_equal(src1p->bits, src2p->bits, nbits);
-}
-
-#define cpus_intersects(src1, src2) __cpus_intersects(&(src1), &(src2), NR_CPUS)
-static inline int __cpus_intersects(const cpumask_t *src1p,
-					const cpumask_t *src2p, int nbits)
-{
-	return bitmap_intersects(src1p->bits, src2p->bits, nbits);
-}
-
-#define cpus_subset(src1, src2) __cpus_subset(&(src1), &(src2), NR_CPUS)
-static inline int __cpus_subset(const cpumask_t *src1p,
-					const cpumask_t *src2p, int nbits)
-{
-	return bitmap_subset(src1p->bits, src2p->bits, nbits);
-}
-
-#define cpus_empty(src) __cpus_empty(&(src), NR_CPUS)
-static inline int __cpus_empty(const cpumask_t *srcp, int nbits)
-{
-	return bitmap_empty(srcp->bits, nbits);
-}
-
-#define cpus_weight(cpumask) __cpus_weight(&(cpumask), NR_CPUS)
-static inline int __cpus_weight(const cpumask_t *srcp, int nbits)
-{
-	return bitmap_weight(srcp->bits, nbits);
-}
-
-#define cpus_shift_left(dst, src, n) \
-			__cpus_shift_left(&(dst), &(src), (n), NR_CPUS)
-static inline void __cpus_shift_left(cpumask_t *dstp,
-					const cpumask_t *srcp, int n, int nbits)
-{
-	bitmap_shift_left(dstp->bits, srcp->bits, n, nbits);
-}
-#endif /* !CONFIG_DISABLE_OBSOLETE_CPUMASK_FUNCTIONS */
-
-#endif /* __LINUX_CPUMASK_H */
diff --git a/ANDROID_3.4.5/include/linux/cpuset.h b/ANDROID_3.4.5/include/linux/cpuset.h
deleted file mode 100644
index 668f66ba..00000000
--- a/ANDROID_3.4.5/include/linux/cpuset.h
+++ /dev/null
@@ -1,238 +0,0 @@
-#ifndef _LINUX_CPUSET_H
-#define _LINUX_CPUSET_H
-/*
- *  cpuset interface
- *
- *  Copyright (C) 2003 BULL SA
- *  Copyright (C) 2004-2006 Silicon Graphics, Inc.
- *
- */
-
-#include <linux/sched.h>
-#include <linux/cpumask.h>
-#include <linux/nodemask.h>
-#include <linux/cgroup.h>
-#include <linux/mm.h>
-
-#ifdef CONFIG_CPUSETS
-
-extern int number_of_cpusets;	/* How many cpusets are defined in system? */
-
-extern int cpuset_init(void);
-extern void cpuset_init_smp(void);
-extern void cpuset_update_active_cpus(void);
-extern void cpuset_cpus_allowed(struct task_struct *p, struct cpumask *mask);
-extern void cpuset_cpus_allowed_fallback(struct task_struct *p);
-extern nodemask_t cpuset_mems_allowed(struct task_struct *p);
-#define cpuset_current_mems_allowed (current->mems_allowed)
-void cpuset_init_current_mems_allowed(void);
-int cpuset_nodemask_valid_mems_allowed(nodemask_t *nodemask);
-
-extern int __cpuset_node_allowed_softwall(int node, gfp_t gfp_mask);
-extern int __cpuset_node_allowed_hardwall(int node, gfp_t gfp_mask);
-
-static inline int cpuset_node_allowed_softwall(int node, gfp_t gfp_mask)
-{
-	return number_of_cpusets <= 1 ||
-		__cpuset_node_allowed_softwall(node, gfp_mask);
-}
-
-static inline int cpuset_node_allowed_hardwall(int node, gfp_t gfp_mask)
-{
-	return number_of_cpusets <= 1 ||
-		__cpuset_node_allowed_hardwall(node, gfp_mask);
-}
-
-static inline int cpuset_zone_allowed_softwall(struct zone *z, gfp_t gfp_mask)
-{
-	return cpuset_node_allowed_softwall(zone_to_nid(z), gfp_mask);
-}
-
-static inline int cpuset_zone_allowed_hardwall(struct zone *z, gfp_t gfp_mask)
-{
-	return cpuset_node_allowed_hardwall(zone_to_nid(z), gfp_mask);
-}
-
-extern int cpuset_mems_allowed_intersects(const struct task_struct *tsk1,
-					  const struct task_struct *tsk2);
-
-#define cpuset_memory_pressure_bump() 				\
-	do {							\
-		if (cpuset_memory_pressure_enabled)		\
-			__cpuset_memory_pressure_bump();	\
-	} while (0)
-extern int cpuset_memory_pressure_enabled;
-extern void __cpuset_memory_pressure_bump(void);
-
-extern const struct file_operations proc_cpuset_operations;
-struct seq_file;
-extern void cpuset_task_status_allowed(struct seq_file *m,
-					struct task_struct *task);
-
-extern int cpuset_mem_spread_node(void);
-extern int cpuset_slab_spread_node(void);
-
-static inline int cpuset_do_page_mem_spread(void)
-{
-	return current->flags & PF_SPREAD_PAGE;
-}
-
-static inline int cpuset_do_slab_mem_spread(void)
-{
-	return current->flags & PF_SPREAD_SLAB;
-}
-
-extern int current_cpuset_is_being_rebound(void);
-
-extern void rebuild_sched_domains(void);
-
-extern void cpuset_print_task_mems_allowed(struct task_struct *p);
-
-/*
- * get_mems_allowed is required when making decisions involving mems_allowed
- * such as during page allocation. mems_allowed can be updated in parallel
- * and depending on the new value an operation can fail potentially causing
- * process failure. A retry loop with get_mems_allowed and put_mems_allowed
- * prevents these artificial failures.
- */
-static inline unsigned int get_mems_allowed(void)
-{
-	return read_seqcount_begin(&current->mems_allowed_seq);
-}
-
-/*
- * If this returns false, the operation that took place after get_mems_allowed
- * may have failed. It is up to the caller to retry the operation if
- * appropriate.
- */
-static inline bool put_mems_allowed(unsigned int seq)
-{
-	return !read_seqcount_retry(&current->mems_allowed_seq, seq);
-}
-
-static inline void set_mems_allowed(nodemask_t nodemask)
-{
-	task_lock(current);
-	write_seqcount_begin(&current->mems_allowed_seq);
-	current->mems_allowed = nodemask;
-	write_seqcount_end(&current->mems_allowed_seq);
-	task_unlock(current);
-}
-
-#else /* !CONFIG_CPUSETS */
-
-static inline int cpuset_init(void) { return 0; }
-static inline void cpuset_init_smp(void) {}
-
-static inline void cpuset_update_active_cpus(void)
-{
-	partition_sched_domains(1, NULL, NULL);
-}
-
-static inline void cpuset_cpus_allowed(struct task_struct *p,
-				       struct cpumask *mask)
-{
-	cpumask_copy(mask, cpu_possible_mask);
-}
-
-static inline void cpuset_cpus_allowed_fallback(struct task_struct *p)
-{
-}
-
-static inline nodemask_t cpuset_mems_allowed(struct task_struct *p)
-{
-	return node_possible_map;
-}
-
-#define cpuset_current_mems_allowed (node_states[N_HIGH_MEMORY])
-static inline void cpuset_init_current_mems_allowed(void) {}
-
-static inline int cpuset_nodemask_valid_mems_allowed(nodemask_t *nodemask)
-{
-	return 1;
-}
-
-static inline int cpuset_node_allowed_softwall(int node, gfp_t gfp_mask)
-{
-	return 1;
-}
-
-static inline int cpuset_node_allowed_hardwall(int node, gfp_t gfp_mask)
-{
-	return 1;
-}
-
-static inline int cpuset_zone_allowed_softwall(struct zone *z, gfp_t gfp_mask)
-{
-	return 1;
-}
-
-static inline int cpuset_zone_allowed_hardwall(struct zone *z, gfp_t gfp_mask)
-{
-	return 1;
-}
-
-static inline int cpuset_mems_allowed_intersects(const struct task_struct *tsk1,
-						 const struct task_struct *tsk2)
-{
-	return 1;
-}
-
-static inline void cpuset_memory_pressure_bump(void) {}
-
-static inline void cpuset_task_status_allowed(struct seq_file *m,
-						struct task_struct *task)
-{
-}
-
-static inline int cpuset_mem_spread_node(void)
-{
-	return 0;
-}
-
-static inline int cpuset_slab_spread_node(void)
-{
-	return 0;
-}
-
-static inline int cpuset_do_page_mem_spread(void)
-{
-	return 0;
-}
-
-static inline int cpuset_do_slab_mem_spread(void)
-{
-	return 0;
-}
-
-static inline int current_cpuset_is_being_rebound(void)
-{
-	return 0;
-}
-
-static inline void rebuild_sched_domains(void)
-{
-	partition_sched_domains(1, NULL, NULL);
-}
-
-static inline void cpuset_print_task_mems_allowed(struct task_struct *p)
-{
-}
-
-static inline void set_mems_allowed(nodemask_t nodemask)
-{
-}
-
-static inline unsigned int get_mems_allowed(void)
-{
-	return 0;
-}
-
-static inline bool put_mems_allowed(unsigned int seq)
-{
-	return true;
-}
-
-#endif /* !CONFIG_CPUSETS */
-
-#endif /* _LINUX_CPUSET_H */
diff --git a/ANDROID_3.4.5/include/linux/cramfs_fs.h b/ANDROID_3.4.5/include/linux/cramfs_fs.h
deleted file mode 100644
index 0e7bf272..00000000
--- a/ANDROID_3.4.5/include/linux/cramfs_fs.h
+++ /dev/null
@@ -1,94 +0,0 @@
-#ifndef __CRAMFS_H
-#define __CRAMFS_H
-
-#include <linux/types.h>
-#include <linux/magic.h>
-
-#define CRAMFS_SIGNATURE	"Compressed ROMFS"
-
-/*
- * Width of various bitfields in struct cramfs_inode.
- * Primarily used to generate warnings in mkcramfs.
- */
-#define CRAMFS_MODE_WIDTH 16
-#define CRAMFS_UID_WIDTH 16
-#define CRAMFS_SIZE_WIDTH 24
-#define CRAMFS_GID_WIDTH 8
-#define CRAMFS_NAMELEN_WIDTH 6
-#define CRAMFS_OFFSET_WIDTH 26
-
-/*
- * Since inode.namelen is a unsigned 6-bit number, the maximum cramfs
- * path length is 63 << 2 = 252.
- */
-#define CRAMFS_MAXPATHLEN (((1 << CRAMFS_NAMELEN_WIDTH) - 1) << 2)
-
-/*
- * Reasonably terse representation of the inode data.
- */
-struct cramfs_inode {
-	__u32 mode:CRAMFS_MODE_WIDTH, uid:CRAMFS_UID_WIDTH;
-	/* SIZE for device files is i_rdev */
-	__u32 size:CRAMFS_SIZE_WIDTH, gid:CRAMFS_GID_WIDTH;
-	/* NAMELEN is the length of the file name, divided by 4 and
-           rounded up.  (cramfs doesn't support hard links.) */
-	/* OFFSET: For symlinks and non-empty regular files, this
-	   contains the offset (divided by 4) of the file data in
-	   compressed form (starting with an array of block pointers;
-	   see README).  For non-empty directories it is the offset
-	   (divided by 4) of the inode of the first file in that
-	   directory.  For anything else, offset is zero. */
-	__u32 namelen:CRAMFS_NAMELEN_WIDTH, offset:CRAMFS_OFFSET_WIDTH;
-};
-
-struct cramfs_info {
-	__u32 crc;
-	__u32 edition;
-	__u32 blocks;
-	__u32 files;
-};
-
-/*
- * Superblock information at the beginning of the FS.
- */
-struct cramfs_super {
-	__u32 magic;			/* 0x28cd3d45 - random number */
-	__u32 size;			/* length in bytes */
-	__u32 flags;			/* feature flags */
-	__u32 future;			/* reserved for future use */
-	__u8 signature[16];		/* "Compressed ROMFS" */
-	struct cramfs_info fsid;	/* unique filesystem info */
-	__u8 name[16];			/* user-defined name */
-	struct cramfs_inode root;	/* root inode data */
-};
-
-/*
- * Feature flags
- *
- * 0x00000000 - 0x000000ff: features that work for all past kernels
- * 0x00000100 - 0xffffffff: features that don't work for past kernels
- */
-#define CRAMFS_FLAG_FSID_VERSION_2	0x00000001	/* fsid version #2 */
-#define CRAMFS_FLAG_SORTED_DIRS		0x00000002	/* sorted dirs */
-#define CRAMFS_FLAG_HOLES		0x00000100	/* support for holes */
-#define CRAMFS_FLAG_WRONG_SIGNATURE	0x00000200	/* reserved */
-#define CRAMFS_FLAG_SHIFTED_ROOT_OFFSET	0x00000400	/* shifted root fs */
-
-/*
- * Valid values in super.flags.  Currently we refuse to mount
- * if (flags & ~CRAMFS_SUPPORTED_FLAGS).  Maybe that should be
- * changed to test super.future instead.
- */
-#define CRAMFS_SUPPORTED_FLAGS	( 0x000000ff \
-				| CRAMFS_FLAG_HOLES \
-				| CRAMFS_FLAG_WRONG_SIGNATURE \
-				| CRAMFS_FLAG_SHIFTED_ROOT_OFFSET )
-
-#ifdef __KERNEL__
-/* Uncompression interfaces to the underlying zlib */
-int cramfs_uncompress_block(void *dst, int dstlen, void *src, int srclen);
-int cramfs_uncompress_init(void);
-void cramfs_uncompress_exit(void);
-#endif /* __KERNEL__ */
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/cramfs_fs_sb.h b/ANDROID_3.4.5/include/linux/cramfs_fs_sb.h
deleted file mode 100644
index 83906935..00000000
--- a/ANDROID_3.4.5/include/linux/cramfs_fs_sb.h
+++ /dev/null
@@ -1,20 +0,0 @@
-#ifndef _CRAMFS_FS_SB
-#define _CRAMFS_FS_SB
-
-/*
- * cramfs super-block data in memory
- */
-struct cramfs_sb_info {
-			unsigned long magic;
-			unsigned long size;
-			unsigned long blocks;
-			unsigned long files;
-			unsigned long flags;
-};
-
-static inline struct cramfs_sb_info *CRAMFS_SB(struct super_block *sb)
-{
-	return sb->s_fs_info;
-}
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/crash_dump.h b/ANDROID_3.4.5/include/linux/crash_dump.h
deleted file mode 100644
index 37e4f8da..00000000
--- a/ANDROID_3.4.5/include/linux/crash_dump.h
+++ /dev/null
@@ -1,80 +0,0 @@
-#ifndef LINUX_CRASH_DUMP_H
-#define LINUX_CRASH_DUMP_H
-
-#ifdef CONFIG_CRASH_DUMP
-#include <linux/kexec.h>
-#include <linux/proc_fs.h>
-#include <linux/elf.h>
-
-#define ELFCORE_ADDR_MAX	(-1ULL)
-#define ELFCORE_ADDR_ERR	(-2ULL)
-
-extern unsigned long long elfcorehdr_addr;
-extern unsigned long long elfcorehdr_size;
-
-extern ssize_t copy_oldmem_page(unsigned long, char *, size_t,
-						unsigned long, int);
-
-/* Architecture code defines this if there are other possible ELF
- * machine types, e.g. on bi-arch capable hardware. */
-#ifndef vmcore_elf_check_arch_cross
-#define vmcore_elf_check_arch_cross(x) 0
-#endif
-
-/*
- * Architecture code can redefine this if there are any special checks
- * needed for 64-bit ELF vmcores. In case of 32-bit only architecture,
- * this can be set to zero.
- */
-#ifndef vmcore_elf64_check_arch
-#define vmcore_elf64_check_arch(x) (elf_check_arch(x) || vmcore_elf_check_arch_cross(x))
-#endif
-
-/*
- * is_kdump_kernel() checks whether this kernel is booting after a panic of
- * previous kernel or not. This is determined by checking if previous kernel
- * has passed the elf core header address on command line.
- *
- * This is not just a test if CONFIG_CRASH_DUMP is enabled or not. It will
- * return 1 if CONFIG_CRASH_DUMP=y and if kernel is booting after a panic of
- * previous kernel.
- */
-
-static inline int is_kdump_kernel(void)
-{
-	return (elfcorehdr_addr != ELFCORE_ADDR_MAX) ? 1 : 0;
-}
-
-/* is_vmcore_usable() checks if the kernel is booting after a panic and
- * the vmcore region is usable.
- *
- * This makes use of the fact that due to alignment -2ULL is not
- * a valid pointer, much in the vain of IS_ERR(), except
- * dealing directly with an unsigned long long rather than a pointer.
- */
-
-static inline int is_vmcore_usable(void)
-{
-	return is_kdump_kernel() && elfcorehdr_addr != ELFCORE_ADDR_ERR ? 1 : 0;
-}
-
-/* vmcore_unusable() marks the vmcore as unusable,
- * without disturbing the logic of is_kdump_kernel()
- */
-
-static inline void vmcore_unusable(void)
-{
-	if (is_kdump_kernel())
-		elfcorehdr_addr = ELFCORE_ADDR_ERR;
-}
-
-#define HAVE_OLDMEM_PFN_IS_RAM 1
-extern int register_oldmem_pfn_is_ram(int (*fn)(unsigned long pfn));
-extern void unregister_oldmem_pfn_is_ram(void);
-
-#else /* !CONFIG_CRASH_DUMP */
-static inline int is_kdump_kernel(void) { return 0; }
-#endif /* CONFIG_CRASH_DUMP */
-
-extern unsigned long saved_max_pfn;
-#endif /* LINUX_CRASHDUMP_H */
diff --git a/ANDROID_3.4.5/include/linux/crc-ccitt.h b/ANDROID_3.4.5/include/linux/crc-ccitt.h
deleted file mode 100644
index f52696a1..00000000
--- a/ANDROID_3.4.5/include/linux/crc-ccitt.h
+++ /dev/null
@@ -1,15 +0,0 @@
-#ifndef _LINUX_CRC_CCITT_H
-#define _LINUX_CRC_CCITT_H
-
-#include <linux/types.h>
-
-extern u16 const crc_ccitt_table[256];
-
-extern u16 crc_ccitt(u16 crc, const u8 *buffer, size_t len);
-
-static inline u16 crc_ccitt_byte(u16 crc, const u8 c)
-{
-	return (crc >> 8) ^ crc_ccitt_table[(crc ^ c) & 0xff];
-}
-
-#endif /* _LINUX_CRC_CCITT_H */
diff --git a/ANDROID_3.4.5/include/linux/crc-itu-t.h b/ANDROID_3.4.5/include/linux/crc-itu-t.h
deleted file mode 100644
index 84920f3c..00000000
--- a/ANDROID_3.4.5/include/linux/crc-itu-t.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- *	crc-itu-t.h - CRC ITU-T V.41 routine
- *
- * Implements the standard CRC ITU-T V.41:
- *   Width 16
- *   Poly  0x0x1021 (x^16 + x^12 + x^15 + 1)
- *   Init  0
- *
- * This source code is licensed under the GNU General Public License,
- * Version 2. See the file COPYING for more details.
- */
-
-#ifndef CRC_ITU_T_H
-#define CRC_ITU_T_H
-
-#include <linux/types.h>
-
-extern u16 const crc_itu_t_table[256];
-
-extern u16 crc_itu_t(u16 crc, const u8 *buffer, size_t len);
-
-static inline u16 crc_itu_t_byte(u16 crc, const u8 data)
-{
-	return (crc << 8) ^ crc_itu_t_table[((crc >> 8) ^ data) & 0xff];
-}
-
-#endif /* CRC_ITU_T_H */
-
diff --git a/ANDROID_3.4.5/include/linux/crc-t10dif.h b/ANDROID_3.4.5/include/linux/crc-t10dif.h
deleted file mode 100644
index a9c96d86..00000000
--- a/ANDROID_3.4.5/include/linux/crc-t10dif.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef _LINUX_CRC_T10DIF_H
-#define _LINUX_CRC_T10DIF_H
-
-#include <linux/types.h>
-
-__u16 crc_t10dif(unsigned char const *, size_t);
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/crc16.h b/ANDROID_3.4.5/include/linux/crc16.h
deleted file mode 100644
index 9443c084..00000000
--- a/ANDROID_3.4.5/include/linux/crc16.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
- *	crc16.h - CRC-16 routine
- *
- * Implements the standard CRC-16:
- *   Width 16
- *   Poly  0x8005 (x^16 + x^15 + x^2 + 1)
- *   Init  0
- *
- * Copyright (c) 2005 Ben Gardner <bgardner@wabtec.com>
- *
- * This source code is licensed under the GNU General Public License,
- * Version 2. See the file COPYING for more details.
- */
-
-#ifndef __CRC16_H
-#define __CRC16_H
-
-#include <linux/types.h>
-
-extern u16 const crc16_table[256];
-
-extern u16 crc16(u16 crc, const u8 *buffer, size_t len);
-
-static inline u16 crc16_byte(u16 crc, const u8 data)
-{
-	return (crc >> 8) ^ crc16_table[(crc ^ data) & 0xff];
-}
-
-#endif /* __CRC16_H */
-
diff --git a/ANDROID_3.4.5/include/linux/crc32.h b/ANDROID_3.4.5/include/linux/crc32.h
deleted file mode 100644
index 68267b64..00000000
--- a/ANDROID_3.4.5/include/linux/crc32.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * crc32.h
- * See linux/lib/crc32.c for license and changes
- */
-#ifndef _LINUX_CRC32_H
-#define _LINUX_CRC32_H
-
-#include <linux/types.h>
-#include <linux/bitrev.h>
-
-extern u32  crc32_le(u32 crc, unsigned char const *p, size_t len);
-extern u32  crc32_be(u32 crc, unsigned char const *p, size_t len);
-
-extern u32  __crc32c_le(u32 crc, unsigned char const *p, size_t len);
-
-#define crc32(seed, data, length)  crc32_le(seed, (unsigned char const *)(data), length)
-
-/*
- * Helpers for hash table generation of ethernet nics:
- *
- * Ethernet sends the least significant bit of a byte first, thus crc32_le
- * is used. The output of crc32_le is bit reversed [most significant bit
- * is in bit nr 0], thus it must be reversed before use. Except for
- * nics that bit swap the result internally...
- */
-#define ether_crc(length, data)    bitrev32(crc32_le(~0, data, length))
-#define ether_crc_le(length, data) crc32_le(~0, data, length)
-
-#endif /* _LINUX_CRC32_H */
diff --git a/ANDROID_3.4.5/include/linux/crc32c.h b/ANDROID_3.4.5/include/linux/crc32c.h
deleted file mode 100644
index bd8b44d9..00000000
--- a/ANDROID_3.4.5/include/linux/crc32c.h
+++ /dev/null
@@ -1,11 +0,0 @@
-#ifndef _LINUX_CRC32C_H
-#define _LINUX_CRC32C_H
-
-#include <linux/types.h>
-
-extern u32 crc32c(u32 crc, const void *address, unsigned int length);
-
-/* This macro exists for backwards-compatibility. */
-#define crc32c_le crc32c
-
-#endif	/* _LINUX_CRC32C_H */
diff --git a/ANDROID_3.4.5/include/linux/crc7.h b/ANDROID_3.4.5/include/linux/crc7.h
deleted file mode 100644
index 1786e772..00000000
--- a/ANDROID_3.4.5/include/linux/crc7.h
+++ /dev/null
@@ -1,14 +0,0 @@
-#ifndef _LINUX_CRC7_H
-#define _LINUX_CRC7_H
-#include <linux/types.h>
-
-extern const u8 crc7_syndrome_table[256];
-
-static inline u8 crc7_byte(u8 crc, u8 data)
-{
-	return crc7_syndrome_table[(crc << 1) ^ data];
-}
-
-extern u8 crc7(u8 crc, const u8 *buffer, size_t len);
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/crc8.h b/ANDROID_3.4.5/include/linux/crc8.h
deleted file mode 100644
index 13c8dabb..00000000
--- a/ANDROID_3.4.5/include/linux/crc8.h
+++ /dev/null
@@ -1,101 +0,0 @@
-/*
- * Copyright (c) 2011 Broadcom Corporation
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
- * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
- * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
- * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- */
-#ifndef __CRC8_H_
-#define __CRC8_H_
-
-#include <linux/types.h>
-
-/* see usage of this value in crc8() description */
-#define CRC8_INIT_VALUE		0xFF
-
-/*
- * Return value of crc8() indicating valid message+crc. This is true
- * if a CRC is inverted before transmission. The CRC computed over the
- * whole received bitstream is _table[x], where x is the bit pattern
- * of the modification (almost always 0xff).
- */
-#define CRC8_GOOD_VALUE(_table)	(_table[0xFF])
-
-/* required table size for crc8 algorithm */
-#define CRC8_TABLE_SIZE			256
-
-/* helper macro assuring right table size is used */
-#define DECLARE_CRC8_TABLE(_table) \
-	static u8 _table[CRC8_TABLE_SIZE]
-
-/**
- * crc8_populate_lsb - fill crc table for given polynomial in regular bit order.
- *
- * @table:	table to be filled.
- * @polynomial:	polynomial for which table is to be filled.
- *
- * This function fills the provided table according the polynomial provided for
- * regular bit order (lsb first). Polynomials in CRC algorithms are typically
- * represented as shown below.
- *
- *	poly = x^8 + x^7 + x^6 + x^4 + x^2 + 1
- *
- * For lsb first direction x^7 maps to the lsb. So the polynomial is as below.
- *
- * - lsb first: poly = 10101011(1) = 0xAB
- */
-void crc8_populate_lsb(u8 table[CRC8_TABLE_SIZE], u8 polynomial);
-
-/**
- * crc8_populate_msb - fill crc table for given polynomial in reverse bit order.
- *
- * @table:	table to be filled.
- * @polynomial:	polynomial for which table is to be filled.
- *
- * This function fills the provided table according the polynomial provided for
- * reverse bit order (msb first). Polynomials in CRC algorithms are typically
- * represented as shown below.
- *
- *	poly = x^8 + x^7 + x^6 + x^4 + x^2 + 1
- *
- * For msb first direction x^7 maps to the msb. So the polynomial is as below.
- *
- * - msb first: poly = (1)11010101 = 0xD5
- */
-void crc8_populate_msb(u8 table[CRC8_TABLE_SIZE], u8 polynomial);
-
-/**
- * crc8() - calculate a crc8 over the given input data.
- *
- * @table:	crc table used for calculation.
- * @pdata:	pointer to data buffer.
- * @nbytes:	number of bytes in data buffer.
- * @crc:	previous returned crc8 value.
- *
- * The CRC8 is calculated using the polynomial given in crc8_populate_msb()
- * or crc8_populate_lsb().
- *
- * The caller provides the initial value (either %CRC8_INIT_VALUE
- * or the previous returned value) to allow for processing of
- * discontiguous blocks of data.  When generating the CRC the
- * caller is responsible for complementing the final return value
- * and inserting it into the byte stream.  When validating a byte
- * stream (including CRC8), a final return value of %CRC8_GOOD_VALUE
- * indicates the byte stream data can be considered valid.
- *
- * Reference:
- * "A Painless Guide to CRC Error Detection Algorithms", ver 3, Aug 1993
- * Williams, Ross N., ross<at>ross.net
- * (see URL http://www.ross.net/crc/download/crc_v3.txt).
- */
-u8 crc8(const u8 table[CRC8_TABLE_SIZE], u8 *pdata, size_t nbytes, u8 crc);
-
-#endif /* __CRC8_H_ */
diff --git a/ANDROID_3.4.5/include/linux/cred.h b/ANDROID_3.4.5/include/linux/cred.h
deleted file mode 100644
index adadf71a..00000000
--- a/ANDROID_3.4.5/include/linux/cred.h
+++ /dev/null
@@ -1,394 +0,0 @@
-/* Credentials management - see Documentation/security/credentials.txt
- *
- * Copyright (C) 2008 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-
-#ifndef _LINUX_CRED_H
-#define _LINUX_CRED_H
-
-#include <linux/capability.h>
-#include <linux/init.h>
-#include <linux/key.h>
-#include <linux/selinux.h>
-#include <linux/atomic.h>
-
-struct user_struct;
-struct cred;
-struct inode;
-
-/*
- * COW Supplementary groups list
- */
-#define NGROUPS_SMALL		32
-#define NGROUPS_PER_BLOCK	((unsigned int)(PAGE_SIZE / sizeof(gid_t)))
-
-struct group_info {
-	atomic_t	usage;
-	int		ngroups;
-	int		nblocks;
-	gid_t		small_block[NGROUPS_SMALL];
-	gid_t		*blocks[0];
-};
-
-/**
- * get_group_info - Get a reference to a group info structure
- * @group_info: The group info to reference
- *
- * This gets a reference to a set of supplementary groups.
- *
- * If the caller is accessing a task's credentials, they must hold the RCU read
- * lock when reading.
- */
-static inline struct group_info *get_group_info(struct group_info *gi)
-{
-	atomic_inc(&gi->usage);
-	return gi;
-}
-
-/**
- * put_group_info - Release a reference to a group info structure
- * @group_info: The group info to release
- */
-#define put_group_info(group_info)			\
-do {							\
-	if (atomic_dec_and_test(&(group_info)->usage))	\
-		groups_free(group_info);		\
-} while (0)
-
-extern struct group_info *groups_alloc(int);
-extern struct group_info init_groups;
-extern void groups_free(struct group_info *);
-extern int set_current_groups(struct group_info *);
-extern int set_groups(struct cred *, struct group_info *);
-extern int groups_search(const struct group_info *, gid_t);
-
-/* access the groups "array" with this macro */
-#define GROUP_AT(gi, i) \
-	((gi)->blocks[(i) / NGROUPS_PER_BLOCK][(i) % NGROUPS_PER_BLOCK])
-
-extern int in_group_p(gid_t);
-extern int in_egroup_p(gid_t);
-
-/*
- * The common credentials for a thread group
- * - shared by CLONE_THREAD
- */
-#ifdef CONFIG_KEYS
-struct thread_group_cred {
-	atomic_t	usage;
-	pid_t		tgid;			/* thread group process ID */
-	spinlock_t	lock;
-	struct key __rcu *session_keyring;	/* keyring inherited over fork */
-	struct key	*process_keyring;	/* keyring private to this process */
-	struct rcu_head	rcu;			/* RCU deletion hook */
-};
-#endif
-
-/*
- * The security context of a task
- *
- * The parts of the context break down into two categories:
- *
- *  (1) The objective context of a task.  These parts are used when some other
- *	task is attempting to affect this one.
- *
- *  (2) The subjective context.  These details are used when the task is acting
- *	upon another object, be that a file, a task, a key or whatever.
- *
- * Note that some members of this structure belong to both categories - the
- * LSM security pointer for instance.
- *
- * A task has two security pointers.  task->real_cred points to the objective
- * context that defines that task's actual details.  The objective part of this
- * context is used whenever that task is acted upon.
- *
- * task->cred points to the subjective context that defines the details of how
- * that task is going to act upon another object.  This may be overridden
- * temporarily to point to another security context, but normally points to the
- * same context as task->real_cred.
- */
-struct cred {
-	atomic_t	usage;
-#ifdef CONFIG_DEBUG_CREDENTIALS
-	atomic_t	subscribers;	/* number of processes subscribed */
-	void		*put_addr;
-	unsigned	magic;
-#define CRED_MAGIC	0x43736564
-#define CRED_MAGIC_DEAD	0x44656144
-#endif
-	uid_t		uid;		/* real UID of the task */
-	gid_t		gid;		/* real GID of the task */
-	uid_t		suid;		/* saved UID of the task */
-	gid_t		sgid;		/* saved GID of the task */
-	uid_t		euid;		/* effective UID of the task */
-	gid_t		egid;		/* effective GID of the task */
-	uid_t		fsuid;		/* UID for VFS ops */
-	gid_t		fsgid;		/* GID for VFS ops */
-	unsigned	securebits;	/* SUID-less security management */
-	kernel_cap_t	cap_inheritable; /* caps our children can inherit */
-	kernel_cap_t	cap_permitted;	/* caps we're permitted */
-	kernel_cap_t	cap_effective;	/* caps we can actually use */
-	kernel_cap_t	cap_bset;	/* capability bounding set */
-#ifdef CONFIG_KEYS
-	unsigned char	jit_keyring;	/* default keyring to attach requested
-					 * keys to */
-	struct key	*thread_keyring; /* keyring private to this thread */
-	struct key	*request_key_auth; /* assumed request_key authority */
-	struct thread_group_cred *tgcred; /* thread-group shared credentials */
-#endif
-#ifdef CONFIG_SECURITY
-	void		*security;	/* subjective LSM security */
-#endif
-	struct user_struct *user;	/* real user ID subscription */
-	struct user_namespace *user_ns; /* cached user->user_ns */
-	struct group_info *group_info;	/* supplementary groups for euid/fsgid */
-	struct rcu_head	rcu;		/* RCU deletion hook */
-};
-
-extern void __put_cred(struct cred *);
-extern void exit_creds(struct task_struct *);
-extern int copy_creds(struct task_struct *, unsigned long);
-extern const struct cred *get_task_cred(struct task_struct *);
-extern struct cred *cred_alloc_blank(void);
-extern struct cred *prepare_creds(void);
-extern struct cred *prepare_exec_creds(void);
-extern int commit_creds(struct cred *);
-extern void abort_creds(struct cred *);
-extern const struct cred *override_creds(const struct cred *);
-extern void revert_creds(const struct cred *);
-extern struct cred *prepare_kernel_cred(struct task_struct *);
-extern int change_create_files_as(struct cred *, struct inode *);
-extern int set_security_override(struct cred *, u32);
-extern int set_security_override_from_ctx(struct cred *, const char *);
-extern int set_create_files_as(struct cred *, struct inode *);
-extern void __init cred_init(void);
-
-/*
- * check for validity of credentials
- */
-#ifdef CONFIG_DEBUG_CREDENTIALS
-extern void __invalid_creds(const struct cred *, const char *, unsigned);
-extern void __validate_process_creds(struct task_struct *,
-				     const char *, unsigned);
-
-extern bool creds_are_invalid(const struct cred *cred);
-
-static inline void __validate_creds(const struct cred *cred,
-				    const char *file, unsigned line)
-{
-	if (unlikely(creds_are_invalid(cred)))
-		__invalid_creds(cred, file, line);
-}
-
-#define validate_creds(cred)				\
-do {							\
-	__validate_creds((cred), __FILE__, __LINE__);	\
-} while(0)
-
-#define validate_process_creds()				\
-do {								\
-	__validate_process_creds(current, __FILE__, __LINE__);	\
-} while(0)
-
-extern void validate_creds_for_do_exit(struct task_struct *);
-#else
-static inline void validate_creds(const struct cred *cred)
-{
-}
-static inline void validate_creds_for_do_exit(struct task_struct *tsk)
-{
-}
-static inline void validate_process_creds(void)
-{
-}
-#endif
-
-/**
- * get_new_cred - Get a reference on a new set of credentials
- * @cred: The new credentials to reference
- *
- * Get a reference on the specified set of new credentials.  The caller must
- * release the reference.
- */
-static inline struct cred *get_new_cred(struct cred *cred)
-{
-	atomic_inc(&cred->usage);
-	return cred;
-}
-
-/**
- * get_cred - Get a reference on a set of credentials
- * @cred: The credentials to reference
- *
- * Get a reference on the specified set of credentials.  The caller must
- * release the reference.
- *
- * This is used to deal with a committed set of credentials.  Although the
- * pointer is const, this will temporarily discard the const and increment the
- * usage count.  The purpose of this is to attempt to catch at compile time the
- * accidental alteration of a set of credentials that should be considered
- * immutable.
- */
-static inline const struct cred *get_cred(const struct cred *cred)
-{
-	struct cred *nonconst_cred = (struct cred *) cred;
-	validate_creds(cred);
-	return get_new_cred(nonconst_cred);
-}
-
-/**
- * put_cred - Release a reference to a set of credentials
- * @cred: The credentials to release
- *
- * Release a reference to a set of credentials, deleting them when the last ref
- * is released.
- *
- * This takes a const pointer to a set of credentials because the credentials
- * on task_struct are attached by const pointers to prevent accidental
- * alteration of otherwise immutable credential sets.
- */
-static inline void put_cred(const struct cred *_cred)
-{
-	struct cred *cred = (struct cred *) _cred;
-
-	validate_creds(cred);
-	if (atomic_dec_and_test(&(cred)->usage))
-		__put_cred(cred);
-}
-
-/**
- * current_cred - Access the current task's subjective credentials
- *
- * Access the subjective credentials of the current task.  RCU-safe,
- * since nobody else can modify it.
- */
-#define current_cred() \
-	rcu_dereference_protected(current->cred, 1)
-
-/**
- * __task_cred - Access a task's objective credentials
- * @task: The task to query
- *
- * Access the objective credentials of a task.  The caller must hold the RCU
- * readlock or the task must be dead and unable to change its own credentials.
- *
- * The result of this function should not be passed directly to get_cred();
- * rather get_task_cred() should be used instead.
- */
-#define __task_cred(task)						\
-	({								\
-		const struct task_struct *__t = (task);			\
-		rcu_dereference_check(__t->real_cred,			\
-				      task_is_dead(__t));		\
-	})
-
-/**
- * get_current_cred - Get the current task's subjective credentials
- *
- * Get the subjective credentials of the current task, pinning them so that
- * they can't go away.  Accessing the current task's credentials directly is
- * not permitted.
- */
-#define get_current_cred()				\
-	(get_cred(current_cred()))
-
-/**
- * get_current_user - Get the current task's user_struct
- *
- * Get the user record of the current task, pinning it so that it can't go
- * away.
- */
-#define get_current_user()				\
-({							\
-	struct user_struct *__u;			\
-	const struct cred *__cred;			\
-	__cred = current_cred();			\
-	__u = get_uid(__cred->user);			\
-	__u;						\
-})
-
-/**
- * get_current_groups - Get the current task's supplementary group list
- *
- * Get the supplementary group list of the current task, pinning it so that it
- * can't go away.
- */
-#define get_current_groups()				\
-({							\
-	struct group_info *__groups;			\
-	const struct cred *__cred;			\
-	__cred = current_cred();			\
-	__groups = get_group_info(__cred->group_info);	\
-	__groups;					\
-})
-
-#define task_cred_xxx(task, xxx)			\
-({							\
-	__typeof__(((struct cred *)NULL)->xxx) ___val;	\
-	rcu_read_lock();				\
-	___val = __task_cred((task))->xxx;		\
-	rcu_read_unlock();				\
-	___val;						\
-})
-
-#define task_uid(task)		(task_cred_xxx((task), uid))
-#define task_euid(task)		(task_cred_xxx((task), euid))
-
-#define current_cred_xxx(xxx)			\
-({						\
-	current_cred()->xxx;			\
-})
-
-#define current_uid()		(current_cred_xxx(uid))
-#define current_gid()		(current_cred_xxx(gid))
-#define current_euid()		(current_cred_xxx(euid))
-#define current_egid()		(current_cred_xxx(egid))
-#define current_suid()		(current_cred_xxx(suid))
-#define current_sgid()		(current_cred_xxx(sgid))
-#define current_fsuid() 	(current_cred_xxx(fsuid))
-#define current_fsgid() 	(current_cred_xxx(fsgid))
-#define current_cap()		(current_cred_xxx(cap_effective))
-#define current_user()		(current_cred_xxx(user))
-#define current_security()	(current_cred_xxx(security))
-
-#ifdef CONFIG_USER_NS
-#define current_user_ns()	(current_cred_xxx(user_ns))
-#define task_user_ns(task)	(task_cred_xxx((task), user_ns))
-#else
-extern struct user_namespace init_user_ns;
-#define current_user_ns()	(&init_user_ns)
-#define task_user_ns(task)	(&init_user_ns)
-#endif
-
-
-#define current_uid_gid(_uid, _gid)		\
-do {						\
-	const struct cred *__cred;		\
-	__cred = current_cred();		\
-	*(_uid) = __cred->uid;			\
-	*(_gid) = __cred->gid;			\
-} while(0)
-
-#define current_euid_egid(_euid, _egid)		\
-do {						\
-	const struct cred *__cred;		\
-	__cred = current_cred();		\
-	*(_euid) = __cred->euid;		\
-	*(_egid) = __cred->egid;		\
-} while(0)
-
-#define current_fsuid_fsgid(_fsuid, _fsgid)	\
-do {						\
-	const struct cred *__cred;		\
-	__cred = current_cred();		\
-	*(_fsuid) = __cred->fsuid;		\
-	*(_fsgid) = __cred->fsgid;		\
-} while(0)
-
-#endif /* _LINUX_CRED_H */
diff --git a/ANDROID_3.4.5/include/linux/crush/crush.h b/ANDROID_3.4.5/include/linux/crush/crush.h
deleted file mode 100644
index 97e435b1..00000000
--- a/ANDROID_3.4.5/include/linux/crush/crush.h
+++ /dev/null
@@ -1,180 +0,0 @@
-#ifndef CEPH_CRUSH_CRUSH_H
-#define CEPH_CRUSH_CRUSH_H
-
-#include <linux/types.h>
-
-/*
- * CRUSH is a pseudo-random data distribution algorithm that
- * efficiently distributes input values (typically, data objects)
- * across a heterogeneous, structured storage cluster.
- *
- * The algorithm was originally described in detail in this paper
- * (although the algorithm has evolved somewhat since then):
- *
- *     http://www.ssrc.ucsc.edu/Papers/weil-sc06.pdf
- *
- * LGPL2
- */
-
-
-#define CRUSH_MAGIC 0x00010000ul   /* for detecting algorithm revisions */
-
-
-#define CRUSH_MAX_DEPTH 10  /* max crush hierarchy depth */
-#define CRUSH_MAX_SET   10  /* max size of a mapping result */
-
-
-/*
- * CRUSH uses user-defined "rules" to describe how inputs should be
- * mapped to devices.  A rule consists of sequence of steps to perform
- * to generate the set of output devices.
- */
-struct crush_rule_step {
-	__u32 op;
-	__s32 arg1;
-	__s32 arg2;
-};
-
-/* step op codes */
-enum {
-	CRUSH_RULE_NOOP = 0,
-	CRUSH_RULE_TAKE = 1,          /* arg1 = value to start with */
-	CRUSH_RULE_CHOOSE_FIRSTN = 2, /* arg1 = num items to pick */
-				      /* arg2 = type */
-	CRUSH_RULE_CHOOSE_INDEP = 3,  /* same */
-	CRUSH_RULE_EMIT = 4,          /* no args */
-	CRUSH_RULE_CHOOSE_LEAF_FIRSTN = 6,
-	CRUSH_RULE_CHOOSE_LEAF_INDEP = 7,
-};
-
-/*
- * for specifying choose num (arg1) relative to the max parameter
- * passed to do_rule
- */
-#define CRUSH_CHOOSE_N            0
-#define CRUSH_CHOOSE_N_MINUS(x)   (-(x))
-
-/*
- * The rule mask is used to describe what the rule is intended for.
- * Given a ruleset and size of output set, we search through the
- * rule list for a matching rule_mask.
- */
-struct crush_rule_mask {
-	__u8 ruleset;
-	__u8 type;
-	__u8 min_size;
-	__u8 max_size;
-};
-
-struct crush_rule {
-	__u32 len;
-	struct crush_rule_mask mask;
-	struct crush_rule_step steps[0];
-};
-
-#define crush_rule_size(len) (sizeof(struct crush_rule) + \
-			      (len)*sizeof(struct crush_rule_step))
-
-
-
-/*
- * A bucket is a named container of other items (either devices or
- * other buckets).  Items within a bucket are chosen using one of a
- * few different algorithms.  The table summarizes how the speed of
- * each option measures up against mapping stability when items are
- * added or removed.
- *
- *  Bucket Alg     Speed       Additions    Removals
- *  ------------------------------------------------
- *  uniform         O(1)       poor         poor
- *  list            O(n)       optimal      poor
- *  tree            O(log n)   good         good
- *  straw           O(n)       optimal      optimal
- */
-enum {
-	CRUSH_BUCKET_UNIFORM = 1,
-	CRUSH_BUCKET_LIST = 2,
-	CRUSH_BUCKET_TREE = 3,
-	CRUSH_BUCKET_STRAW = 4
-};
-extern const char *crush_bucket_alg_name(int alg);
-
-struct crush_bucket {
-	__s32 id;        /* this'll be negative */
-	__u16 type;      /* non-zero; type=0 is reserved for devices */
-	__u8 alg;        /* one of CRUSH_BUCKET_* */
-	__u8 hash;       /* which hash function to use, CRUSH_HASH_* */
-	__u32 weight;    /* 16-bit fixed point */
-	__u32 size;      /* num items */
-	__s32 *items;
-
-	/*
-	 * cached random permutation: used for uniform bucket and for
-	 * the linear search fallback for the other bucket types.
-	 */
-	__u32 perm_x;  /* @x for which *perm is defined */
-	__u32 perm_n;  /* num elements of *perm that are permuted/defined */
-	__u32 *perm;
-};
-
-struct crush_bucket_uniform {
-	struct crush_bucket h;
-	__u32 item_weight;  /* 16-bit fixed point; all items equally weighted */
-};
-
-struct crush_bucket_list {
-	struct crush_bucket h;
-	__u32 *item_weights;  /* 16-bit fixed point */
-	__u32 *sum_weights;   /* 16-bit fixed point.  element i is sum
-				 of weights 0..i, inclusive */
-};
-
-struct crush_bucket_tree {
-	struct crush_bucket h;  /* note: h.size is _tree_ size, not number of
-				   actual items */
-	__u8 num_nodes;
-	__u32 *node_weights;
-};
-
-struct crush_bucket_straw {
-	struct crush_bucket h;
-	__u32 *item_weights;   /* 16-bit fixed point */
-	__u32 *straws;         /* 16-bit fixed point */
-};
-
-
-
-/*
- * CRUSH map includes all buckets, rules, etc.
- */
-struct crush_map {
-	struct crush_bucket **buckets;
-	struct crush_rule **rules;
-
-	/*
-	 * Parent pointers to identify the parent bucket a device or
-	 * bucket in the hierarchy.  If an item appears more than
-	 * once, this is the _last_ time it appeared (where buckets
-	 * are processed in bucket id order, from -1 on down to
-	 * -max_buckets.
-	 */
-	__u32 *bucket_parents;
-	__u32 *device_parents;
-
-	__s32 max_buckets;
-	__u32 max_rules;
-	__s32 max_devices;
-};
-
-
-/* crush.c */
-extern int crush_get_bucket_item_weight(struct crush_bucket *b, int pos);
-extern void crush_calc_parents(struct crush_map *map);
-extern void crush_destroy_bucket_uniform(struct crush_bucket_uniform *b);
-extern void crush_destroy_bucket_list(struct crush_bucket_list *b);
-extern void crush_destroy_bucket_tree(struct crush_bucket_tree *b);
-extern void crush_destroy_bucket_straw(struct crush_bucket_straw *b);
-extern void crush_destroy_bucket(struct crush_bucket *b);
-extern void crush_destroy(struct crush_map *map);
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/crush/hash.h b/ANDROID_3.4.5/include/linux/crush/hash.h
deleted file mode 100644
index 91e88423..00000000
--- a/ANDROID_3.4.5/include/linux/crush/hash.h
+++ /dev/null
@@ -1,17 +0,0 @@
-#ifndef CEPH_CRUSH_HASH_H
-#define CEPH_CRUSH_HASH_H
-
-#define CRUSH_HASH_RJENKINS1   0
-
-#define CRUSH_HASH_DEFAULT CRUSH_HASH_RJENKINS1
-
-extern const char *crush_hash_name(int type);
-
-extern __u32 crush_hash32(int type, __u32 a);
-extern __u32 crush_hash32_2(int type, __u32 a, __u32 b);
-extern __u32 crush_hash32_3(int type, __u32 a, __u32 b, __u32 c);
-extern __u32 crush_hash32_4(int type, __u32 a, __u32 b, __u32 c, __u32 d);
-extern __u32 crush_hash32_5(int type, __u32 a, __u32 b, __u32 c, __u32 d,
-			    __u32 e);
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/crush/mapper.h b/ANDROID_3.4.5/include/linux/crush/mapper.h
deleted file mode 100644
index c46b99c1..00000000
--- a/ANDROID_3.4.5/include/linux/crush/mapper.h
+++ /dev/null
@@ -1,20 +0,0 @@
-#ifndef CEPH_CRUSH_MAPPER_H
-#define CEPH_CRUSH_MAPPER_H
-
-/*
- * CRUSH functions for find rules and then mapping an input to an
- * output set.
- *
- * LGPL2
- */
-
-#include "crush.h"
-
-extern int crush_find_rule(struct crush_map *map, int pool, int type, int size);
-extern int crush_do_rule(struct crush_map *map,
-			 int ruleno,
-			 int x, int *result, int result_max,
-			 int forcefeed,    /* -1 for none */
-			 __u32 *weights);
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/crypto.h b/ANDROID_3.4.5/include/linux/crypto.h
deleted file mode 100644
index b92eadf9..00000000
--- a/ANDROID_3.4.5/include/linux/crypto.h
+++ /dev/null
@@ -1,1287 +0,0 @@
-/*
- * Scatterlist Cryptographic API.
- *
- * Copyright (c) 2002 James Morris <jmorris@intercode.com.au>
- * Copyright (c) 2002 David S. Miller (davem@redhat.com)
- * Copyright (c) 2005 Herbert Xu <herbert@gondor.apana.org.au>
- *
- * Portions derived from Cryptoapi, by Alexander Kjeldaas <astor@fast.no>
- * and Nettle, by Niels Möller.
- * 
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the Free
- * Software Foundation; either version 2 of the License, or (at your option) 
- * any later version.
- *
- */
-#ifndef _LINUX_CRYPTO_H
-#define _LINUX_CRYPTO_H
-
-#include <linux/atomic.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/bug.h>
-#include <linux/slab.h>
-#include <linux/string.h>
-#include <linux/uaccess.h>
-
-/*
- * Algorithm masks and types.
- */
-#define CRYPTO_ALG_TYPE_MASK		0x0000000f
-#define CRYPTO_ALG_TYPE_CIPHER		0x00000001
-#define CRYPTO_ALG_TYPE_COMPRESS	0x00000002
-#define CRYPTO_ALG_TYPE_AEAD		0x00000003
-#define CRYPTO_ALG_TYPE_BLKCIPHER	0x00000004
-#define CRYPTO_ALG_TYPE_ABLKCIPHER	0x00000005
-#define CRYPTO_ALG_TYPE_GIVCIPHER	0x00000006
-#define CRYPTO_ALG_TYPE_DIGEST		0x00000008
-#define CRYPTO_ALG_TYPE_HASH		0x00000008
-#define CRYPTO_ALG_TYPE_SHASH		0x00000009
-#define CRYPTO_ALG_TYPE_AHASH		0x0000000a
-#define CRYPTO_ALG_TYPE_RNG		0x0000000c
-#define CRYPTO_ALG_TYPE_PCOMPRESS	0x0000000f
-
-#define CRYPTO_ALG_TYPE_HASH_MASK	0x0000000e
-#define CRYPTO_ALG_TYPE_AHASH_MASK	0x0000000c
-#define CRYPTO_ALG_TYPE_BLKCIPHER_MASK	0x0000000c
-
-#define CRYPTO_ALG_LARVAL		0x00000010
-#define CRYPTO_ALG_DEAD			0x00000020
-#define CRYPTO_ALG_DYING		0x00000040
-#define CRYPTO_ALG_ASYNC		0x00000080
-
-/*
- * Set this bit if and only if the algorithm requires another algorithm of
- * the same type to handle corner cases.
- */
-#define CRYPTO_ALG_NEED_FALLBACK	0x00000100
-
-/*
- * This bit is set for symmetric key ciphers that have already been wrapped
- * with a generic IV generator to prevent them from being wrapped again.
- */
-#define CRYPTO_ALG_GENIV		0x00000200
-
-/*
- * Set if the algorithm has passed automated run-time testing.  Note that
- * if there is no run-time testing for a given algorithm it is considered
- * to have passed.
- */
-
-#define CRYPTO_ALG_TESTED		0x00000400
-
-/*
- * Set if the algorithm is an instance that is build from templates.
- */
-#define CRYPTO_ALG_INSTANCE		0x00000800
-
-/* Set this bit if the algorithm provided is hardware accelerated but
- * not available to userspace via instruction set or so.
- */
-#define CRYPTO_ALG_KERN_DRIVER_ONLY	0x00001000
-
-/*
- * Transform masks and values (for crt_flags).
- */
-#define CRYPTO_TFM_REQ_MASK		0x000fff00
-#define CRYPTO_TFM_RES_MASK		0xfff00000
-
-#define CRYPTO_TFM_REQ_WEAK_KEY		0x00000100
-#define CRYPTO_TFM_REQ_MAY_SLEEP	0x00000200
-#define CRYPTO_TFM_REQ_MAY_BACKLOG	0x00000400
-#define CRYPTO_TFM_RES_WEAK_KEY		0x00100000
-#define CRYPTO_TFM_RES_BAD_KEY_LEN   	0x00200000
-#define CRYPTO_TFM_RES_BAD_KEY_SCHED 	0x00400000
-#define CRYPTO_TFM_RES_BAD_BLOCK_LEN 	0x00800000
-#define CRYPTO_TFM_RES_BAD_FLAGS 	0x01000000
-
-/*
- * Miscellaneous stuff.
- */
-#define CRYPTO_MAX_ALG_NAME		64
-
-/*
- * The macro CRYPTO_MINALIGN_ATTR (along with the void * type in the actual
- * declaration) is used to ensure that the crypto_tfm context structure is
- * aligned correctly for the given architecture so that there are no alignment
- * faults for C data types.  In particular, this is required on platforms such
- * as arm where pointers are 32-bit aligned but there are data types such as
- * u64 which require 64-bit alignment.
- */
-#define CRYPTO_MINALIGN ARCH_KMALLOC_MINALIGN
-
-#define CRYPTO_MINALIGN_ATTR __attribute__ ((__aligned__(CRYPTO_MINALIGN)))
-
-struct scatterlist;
-struct crypto_ablkcipher;
-struct crypto_async_request;
-struct crypto_aead;
-struct crypto_blkcipher;
-struct crypto_hash;
-struct crypto_rng;
-struct crypto_tfm;
-struct crypto_type;
-struct aead_givcrypt_request;
-struct skcipher_givcrypt_request;
-
-typedef void (*crypto_completion_t)(struct crypto_async_request *req, int err);
-
-struct crypto_async_request {
-	struct list_head list;
-	crypto_completion_t complete;
-	void *data;
-	struct crypto_tfm *tfm;
-
-	u32 flags;
-};
-
-struct ablkcipher_request {
-	struct crypto_async_request base;
-
-	unsigned int nbytes;
-
-	void *info;
-
-	struct scatterlist *src;
-	struct scatterlist *dst;
-
-	void *__ctx[] CRYPTO_MINALIGN_ATTR;
-};
-
-/**
- *	struct aead_request - AEAD request
- *	@base: Common attributes for async crypto requests
- *	@assoclen: Length in bytes of associated data for authentication
- *	@cryptlen: Length of data to be encrypted or decrypted
- *	@iv: Initialisation vector
- *	@assoc: Associated data
- *	@src: Source data
- *	@dst: Destination data
- *	@__ctx: Start of private context data
- */
-struct aead_request {
-	struct crypto_async_request base;
-
-	unsigned int assoclen;
-	unsigned int cryptlen;
-
-	u8 *iv;
-
-	struct scatterlist *assoc;
-	struct scatterlist *src;
-	struct scatterlist *dst;
-
-	void *__ctx[] CRYPTO_MINALIGN_ATTR;
-};
-
-struct blkcipher_desc {
-	struct crypto_blkcipher *tfm;
-	void *info;
-	u32 flags;
-};
-
-struct cipher_desc {
-	struct crypto_tfm *tfm;
-	void (*crfn)(struct crypto_tfm *tfm, u8 *dst, const u8 *src);
-	unsigned int (*prfn)(const struct cipher_desc *desc, u8 *dst,
-			     const u8 *src, unsigned int nbytes);
-	void *info;
-};
-
-struct hash_desc {
-	struct crypto_hash *tfm;
-	u32 flags;
-};
-
-/*
- * Algorithms: modular crypto algorithm implementations, managed
- * via crypto_register_alg() and crypto_unregister_alg().
- */
-struct ablkcipher_alg {
-	int (*setkey)(struct crypto_ablkcipher *tfm, const u8 *key,
-	              unsigned int keylen);
-	int (*encrypt)(struct ablkcipher_request *req);
-	int (*decrypt)(struct ablkcipher_request *req);
-	int (*givencrypt)(struct skcipher_givcrypt_request *req);
-	int (*givdecrypt)(struct skcipher_givcrypt_request *req);
-
-	const char *geniv;
-
-	unsigned int min_keysize;
-	unsigned int max_keysize;
-	unsigned int ivsize;
-};
-
-struct aead_alg {
-	int (*setkey)(struct crypto_aead *tfm, const u8 *key,
-	              unsigned int keylen);
-	int (*setauthsize)(struct crypto_aead *tfm, unsigned int authsize);
-	int (*encrypt)(struct aead_request *req);
-	int (*decrypt)(struct aead_request *req);
-	int (*givencrypt)(struct aead_givcrypt_request *req);
-	int (*givdecrypt)(struct aead_givcrypt_request *req);
-
-	const char *geniv;
-
-	unsigned int ivsize;
-	unsigned int maxauthsize;
-};
-
-struct blkcipher_alg {
-	int (*setkey)(struct crypto_tfm *tfm, const u8 *key,
-	              unsigned int keylen);
-	int (*encrypt)(struct blkcipher_desc *desc,
-		       struct scatterlist *dst, struct scatterlist *src,
-		       unsigned int nbytes);
-	int (*decrypt)(struct blkcipher_desc *desc,
-		       struct scatterlist *dst, struct scatterlist *src,
-		       unsigned int nbytes);
-
-	const char *geniv;
-
-	unsigned int min_keysize;
-	unsigned int max_keysize;
-	unsigned int ivsize;
-};
-
-struct cipher_alg {
-	unsigned int cia_min_keysize;
-	unsigned int cia_max_keysize;
-	int (*cia_setkey)(struct crypto_tfm *tfm, const u8 *key,
-	                  unsigned int keylen);
-	void (*cia_encrypt)(struct crypto_tfm *tfm, u8 *dst, const u8 *src);
-	void (*cia_decrypt)(struct crypto_tfm *tfm, u8 *dst, const u8 *src);
-};
-
-struct compress_alg {
-	int (*coa_compress)(struct crypto_tfm *tfm, const u8 *src,
-			    unsigned int slen, u8 *dst, unsigned int *dlen);
-	int (*coa_decompress)(struct crypto_tfm *tfm, const u8 *src,
-			      unsigned int slen, u8 *dst, unsigned int *dlen);
-};
-
-struct rng_alg {
-	int (*rng_make_random)(struct crypto_rng *tfm, u8 *rdata,
-			       unsigned int dlen);
-	int (*rng_reset)(struct crypto_rng *tfm, u8 *seed, unsigned int slen);
-
-	unsigned int seedsize;
-};
-
-
-#define cra_ablkcipher	cra_u.ablkcipher
-#define cra_aead	cra_u.aead
-#define cra_blkcipher	cra_u.blkcipher
-#define cra_cipher	cra_u.cipher
-#define cra_compress	cra_u.compress
-#define cra_rng		cra_u.rng
-
-struct crypto_alg {
-	struct list_head cra_list;
-	struct list_head cra_users;
-
-	u32 cra_flags;
-	unsigned int cra_blocksize;
-	unsigned int cra_ctxsize;
-	unsigned int cra_alignmask;
-
-	int cra_priority;
-	atomic_t cra_refcnt;
-
-	char cra_name[CRYPTO_MAX_ALG_NAME];
-	char cra_driver_name[CRYPTO_MAX_ALG_NAME];
-
-	const struct crypto_type *cra_type;
-
-	union {
-		struct ablkcipher_alg ablkcipher;
-		struct aead_alg aead;
-		struct blkcipher_alg blkcipher;
-		struct cipher_alg cipher;
-		struct compress_alg compress;
-		struct rng_alg rng;
-	} cra_u;
-
-	int (*cra_init)(struct crypto_tfm *tfm);
-	void (*cra_exit)(struct crypto_tfm *tfm);
-	void (*cra_destroy)(struct crypto_alg *alg);
-	
-	struct module *cra_module;
-};
-
-/*
- * Algorithm registration interface.
- */
-int crypto_register_alg(struct crypto_alg *alg);
-int crypto_unregister_alg(struct crypto_alg *alg);
-int crypto_register_algs(struct crypto_alg *algs, int count);
-int crypto_unregister_algs(struct crypto_alg *algs, int count);
-
-/*
- * Algorithm query interface.
- */
-int crypto_has_alg(const char *name, u32 type, u32 mask);
-
-/*
- * Transforms: user-instantiated objects which encapsulate algorithms
- * and core processing logic.  Managed via crypto_alloc_*() and
- * crypto_free_*(), as well as the various helpers below.
- */
-
-struct ablkcipher_tfm {
-	int (*setkey)(struct crypto_ablkcipher *tfm, const u8 *key,
-	              unsigned int keylen);
-	int (*encrypt)(struct ablkcipher_request *req);
-	int (*decrypt)(struct ablkcipher_request *req);
-	int (*givencrypt)(struct skcipher_givcrypt_request *req);
-	int (*givdecrypt)(struct skcipher_givcrypt_request *req);
-
-	struct crypto_ablkcipher *base;
-
-	unsigned int ivsize;
-	unsigned int reqsize;
-};
-
-struct aead_tfm {
-	int (*setkey)(struct crypto_aead *tfm, const u8 *key,
-	              unsigned int keylen);
-	int (*encrypt)(struct aead_request *req);
-	int (*decrypt)(struct aead_request *req);
-	int (*givencrypt)(struct aead_givcrypt_request *req);
-	int (*givdecrypt)(struct aead_givcrypt_request *req);
-
-	struct crypto_aead *base;
-
-	unsigned int ivsize;
-	unsigned int authsize;
-	unsigned int reqsize;
-};
-
-struct blkcipher_tfm {
-	void *iv;
-	int (*setkey)(struct crypto_tfm *tfm, const u8 *key,
-		      unsigned int keylen);
-	int (*encrypt)(struct blkcipher_desc *desc, struct scatterlist *dst,
-		       struct scatterlist *src, unsigned int nbytes);
-	int (*decrypt)(struct blkcipher_desc *desc, struct scatterlist *dst,
-		       struct scatterlist *src, unsigned int nbytes);
-};
-
-struct cipher_tfm {
-	int (*cit_setkey)(struct crypto_tfm *tfm,
-	                  const u8 *key, unsigned int keylen);
-	void (*cit_encrypt_one)(struct crypto_tfm *tfm, u8 *dst, const u8 *src);
-	void (*cit_decrypt_one)(struct crypto_tfm *tfm, u8 *dst, const u8 *src);
-};
-
-struct hash_tfm {
-	int (*init)(struct hash_desc *desc);
-	int (*update)(struct hash_desc *desc,
-		      struct scatterlist *sg, unsigned int nsg);
-	int (*final)(struct hash_desc *desc, u8 *out);
-	int (*digest)(struct hash_desc *desc, struct scatterlist *sg,
-		      unsigned int nsg, u8 *out);
-	int (*setkey)(struct crypto_hash *tfm, const u8 *key,
-		      unsigned int keylen);
-	unsigned int digestsize;
-};
-
-struct compress_tfm {
-	int (*cot_compress)(struct crypto_tfm *tfm,
-	                    const u8 *src, unsigned int slen,
-	                    u8 *dst, unsigned int *dlen);
-	int (*cot_decompress)(struct crypto_tfm *tfm,
-	                      const u8 *src, unsigned int slen,
-	                      u8 *dst, unsigned int *dlen);
-};
-
-struct rng_tfm {
-	int (*rng_gen_random)(struct crypto_rng *tfm, u8 *rdata,
-			      unsigned int dlen);
-	int (*rng_reset)(struct crypto_rng *tfm, u8 *seed, unsigned int slen);
-};
-
-#define crt_ablkcipher	crt_u.ablkcipher
-#define crt_aead	crt_u.aead
-#define crt_blkcipher	crt_u.blkcipher
-#define crt_cipher	crt_u.cipher
-#define crt_hash	crt_u.hash
-#define crt_compress	crt_u.compress
-#define crt_rng		crt_u.rng
-
-struct crypto_tfm {
-
-	u32 crt_flags;
-	
-	union {
-		struct ablkcipher_tfm ablkcipher;
-		struct aead_tfm aead;
-		struct blkcipher_tfm blkcipher;
-		struct cipher_tfm cipher;
-		struct hash_tfm hash;
-		struct compress_tfm compress;
-		struct rng_tfm rng;
-	} crt_u;
-
-	void (*exit)(struct crypto_tfm *tfm);
-	
-	struct crypto_alg *__crt_alg;
-
-	void *__crt_ctx[] CRYPTO_MINALIGN_ATTR;
-};
-
-struct crypto_ablkcipher {
-	struct crypto_tfm base;
-};
-
-struct crypto_aead {
-	struct crypto_tfm base;
-};
-
-struct crypto_blkcipher {
-	struct crypto_tfm base;
-};
-
-struct crypto_cipher {
-	struct crypto_tfm base;
-};
-
-struct crypto_comp {
-	struct crypto_tfm base;
-};
-
-struct crypto_hash {
-	struct crypto_tfm base;
-};
-
-struct crypto_rng {
-	struct crypto_tfm base;
-};
-
-enum {
-	CRYPTOA_UNSPEC,
-	CRYPTOA_ALG,
-	CRYPTOA_TYPE,
-	CRYPTOA_U32,
-	__CRYPTOA_MAX,
-};
-
-#define CRYPTOA_MAX (__CRYPTOA_MAX - 1)
-
-/* Maximum number of (rtattr) parameters for each template. */
-#define CRYPTO_MAX_ATTRS 32
-
-struct crypto_attr_alg {
-	char name[CRYPTO_MAX_ALG_NAME];
-};
-
-struct crypto_attr_type {
-	u32 type;
-	u32 mask;
-};
-
-struct crypto_attr_u32 {
-	u32 num;
-};
-
-/* 
- * Transform user interface.
- */
- 
-struct crypto_tfm *crypto_alloc_base(const char *alg_name, u32 type, u32 mask);
-void crypto_destroy_tfm(void *mem, struct crypto_tfm *tfm);
-
-static inline void crypto_free_tfm(struct crypto_tfm *tfm)
-{
-	return crypto_destroy_tfm(tfm, tfm);
-}
-
-int alg_test(const char *driver, const char *alg, u32 type, u32 mask);
-
-/*
- * Transform helpers which query the underlying algorithm.
- */
-static inline const char *crypto_tfm_alg_name(struct crypto_tfm *tfm)
-{
-	return tfm->__crt_alg->cra_name;
-}
-
-static inline const char *crypto_tfm_alg_driver_name(struct crypto_tfm *tfm)
-{
-	return tfm->__crt_alg->cra_driver_name;
-}
-
-static inline int crypto_tfm_alg_priority(struct crypto_tfm *tfm)
-{
-	return tfm->__crt_alg->cra_priority;
-}
-
-static inline u32 crypto_tfm_alg_type(struct crypto_tfm *tfm)
-{
-	return tfm->__crt_alg->cra_flags & CRYPTO_ALG_TYPE_MASK;
-}
-
-static inline unsigned int crypto_tfm_alg_blocksize(struct crypto_tfm *tfm)
-{
-	return tfm->__crt_alg->cra_blocksize;
-}
-
-static inline unsigned int crypto_tfm_alg_alignmask(struct crypto_tfm *tfm)
-{
-	return tfm->__crt_alg->cra_alignmask;
-}
-
-static inline u32 crypto_tfm_get_flags(struct crypto_tfm *tfm)
-{
-	return tfm->crt_flags;
-}
-
-static inline void crypto_tfm_set_flags(struct crypto_tfm *tfm, u32 flags)
-{
-	tfm->crt_flags |= flags;
-}
-
-static inline void crypto_tfm_clear_flags(struct crypto_tfm *tfm, u32 flags)
-{
-	tfm->crt_flags &= ~flags;
-}
-
-static inline void *crypto_tfm_ctx(struct crypto_tfm *tfm)
-{
-	return tfm->__crt_ctx;
-}
-
-static inline unsigned int crypto_tfm_ctx_alignment(void)
-{
-	struct crypto_tfm *tfm;
-	return __alignof__(tfm->__crt_ctx);
-}
-
-/*
- * API wrappers.
- */
-static inline struct crypto_ablkcipher *__crypto_ablkcipher_cast(
-	struct crypto_tfm *tfm)
-{
-	return (struct crypto_ablkcipher *)tfm;
-}
-
-static inline u32 crypto_skcipher_type(u32 type)
-{
-	type &= ~(CRYPTO_ALG_TYPE_MASK | CRYPTO_ALG_GENIV);
-	type |= CRYPTO_ALG_TYPE_BLKCIPHER;
-	return type;
-}
-
-static inline u32 crypto_skcipher_mask(u32 mask)
-{
-	mask &= ~(CRYPTO_ALG_TYPE_MASK | CRYPTO_ALG_GENIV);
-	mask |= CRYPTO_ALG_TYPE_BLKCIPHER_MASK;
-	return mask;
-}
-
-struct crypto_ablkcipher *crypto_alloc_ablkcipher(const char *alg_name,
-						  u32 type, u32 mask);
-
-static inline struct crypto_tfm *crypto_ablkcipher_tfm(
-	struct crypto_ablkcipher *tfm)
-{
-	return &tfm->base;
-}
-
-static inline void crypto_free_ablkcipher(struct crypto_ablkcipher *tfm)
-{
-	crypto_free_tfm(crypto_ablkcipher_tfm(tfm));
-}
-
-static inline int crypto_has_ablkcipher(const char *alg_name, u32 type,
-					u32 mask)
-{
-	return crypto_has_alg(alg_name, crypto_skcipher_type(type),
-			      crypto_skcipher_mask(mask));
-}
-
-static inline struct ablkcipher_tfm *crypto_ablkcipher_crt(
-	struct crypto_ablkcipher *tfm)
-{
-	return &crypto_ablkcipher_tfm(tfm)->crt_ablkcipher;
-}
-
-static inline unsigned int crypto_ablkcipher_ivsize(
-	struct crypto_ablkcipher *tfm)
-{
-	return crypto_ablkcipher_crt(tfm)->ivsize;
-}
-
-static inline unsigned int crypto_ablkcipher_blocksize(
-	struct crypto_ablkcipher *tfm)
-{
-	return crypto_tfm_alg_blocksize(crypto_ablkcipher_tfm(tfm));
-}
-
-static inline unsigned int crypto_ablkcipher_alignmask(
-	struct crypto_ablkcipher *tfm)
-{
-	return crypto_tfm_alg_alignmask(crypto_ablkcipher_tfm(tfm));
-}
-
-static inline u32 crypto_ablkcipher_get_flags(struct crypto_ablkcipher *tfm)
-{
-	return crypto_tfm_get_flags(crypto_ablkcipher_tfm(tfm));
-}
-
-static inline void crypto_ablkcipher_set_flags(struct crypto_ablkcipher *tfm,
-					       u32 flags)
-{
-	crypto_tfm_set_flags(crypto_ablkcipher_tfm(tfm), flags);
-}
-
-static inline void crypto_ablkcipher_clear_flags(struct crypto_ablkcipher *tfm,
-						 u32 flags)
-{
-	crypto_tfm_clear_flags(crypto_ablkcipher_tfm(tfm), flags);
-}
-
-static inline int crypto_ablkcipher_setkey(struct crypto_ablkcipher *tfm,
-					   const u8 *key, unsigned int keylen)
-{
-	struct ablkcipher_tfm *crt = crypto_ablkcipher_crt(tfm);
-
-	return crt->setkey(crt->base, key, keylen);
-}
-
-static inline struct crypto_ablkcipher *crypto_ablkcipher_reqtfm(
-	struct ablkcipher_request *req)
-{
-	return __crypto_ablkcipher_cast(req->base.tfm);
-}
-
-static inline int crypto_ablkcipher_encrypt(struct ablkcipher_request *req)
-{
-	struct ablkcipher_tfm *crt =
-		crypto_ablkcipher_crt(crypto_ablkcipher_reqtfm(req));
-	return crt->encrypt(req);
-}
-
-static inline int crypto_ablkcipher_decrypt(struct ablkcipher_request *req)
-{
-	struct ablkcipher_tfm *crt =
-		crypto_ablkcipher_crt(crypto_ablkcipher_reqtfm(req));
-	return crt->decrypt(req);
-}
-
-static inline unsigned int crypto_ablkcipher_reqsize(
-	struct crypto_ablkcipher *tfm)
-{
-	return crypto_ablkcipher_crt(tfm)->reqsize;
-}
-
-static inline void ablkcipher_request_set_tfm(
-	struct ablkcipher_request *req, struct crypto_ablkcipher *tfm)
-{
-	req->base.tfm = crypto_ablkcipher_tfm(crypto_ablkcipher_crt(tfm)->base);
-}
-
-static inline struct ablkcipher_request *ablkcipher_request_cast(
-	struct crypto_async_request *req)
-{
-	return container_of(req, struct ablkcipher_request, base);
-}
-
-static inline struct ablkcipher_request *ablkcipher_request_alloc(
-	struct crypto_ablkcipher *tfm, gfp_t gfp)
-{
-	struct ablkcipher_request *req;
-
-	req = kmalloc(sizeof(struct ablkcipher_request) +
-		      crypto_ablkcipher_reqsize(tfm), gfp);
-
-	if (likely(req))
-		ablkcipher_request_set_tfm(req, tfm);
-
-	return req;
-}
-
-static inline void ablkcipher_request_free(struct ablkcipher_request *req)
-{
-	kzfree(req);
-}
-
-static inline void ablkcipher_request_set_callback(
-	struct ablkcipher_request *req,
-	u32 flags, crypto_completion_t complete, void *data)
-{
-	req->base.complete = complete;
-	req->base.data = data;
-	req->base.flags = flags;
-}
-
-static inline void ablkcipher_request_set_crypt(
-	struct ablkcipher_request *req,
-	struct scatterlist *src, struct scatterlist *dst,
-	unsigned int nbytes, void *iv)
-{
-	req->src = src;
-	req->dst = dst;
-	req->nbytes = nbytes;
-	req->info = iv;
-}
-
-static inline struct crypto_aead *__crypto_aead_cast(struct crypto_tfm *tfm)
-{
-	return (struct crypto_aead *)tfm;
-}
-
-struct crypto_aead *crypto_alloc_aead(const char *alg_name, u32 type, u32 mask);
-
-static inline struct crypto_tfm *crypto_aead_tfm(struct crypto_aead *tfm)
-{
-	return &tfm->base;
-}
-
-static inline void crypto_free_aead(struct crypto_aead *tfm)
-{
-	crypto_free_tfm(crypto_aead_tfm(tfm));
-}
-
-static inline struct aead_tfm *crypto_aead_crt(struct crypto_aead *tfm)
-{
-	return &crypto_aead_tfm(tfm)->crt_aead;
-}
-
-static inline unsigned int crypto_aead_ivsize(struct crypto_aead *tfm)
-{
-	return crypto_aead_crt(tfm)->ivsize;
-}
-
-static inline unsigned int crypto_aead_authsize(struct crypto_aead *tfm)
-{
-	return crypto_aead_crt(tfm)->authsize;
-}
-
-static inline unsigned int crypto_aead_blocksize(struct crypto_aead *tfm)
-{
-	return crypto_tfm_alg_blocksize(crypto_aead_tfm(tfm));
-}
-
-static inline unsigned int crypto_aead_alignmask(struct crypto_aead *tfm)
-{
-	return crypto_tfm_alg_alignmask(crypto_aead_tfm(tfm));
-}
-
-static inline u32 crypto_aead_get_flags(struct crypto_aead *tfm)
-{
-	return crypto_tfm_get_flags(crypto_aead_tfm(tfm));
-}
-
-static inline void crypto_aead_set_flags(struct crypto_aead *tfm, u32 flags)
-{
-	crypto_tfm_set_flags(crypto_aead_tfm(tfm), flags);
-}
-
-static inline void crypto_aead_clear_flags(struct crypto_aead *tfm, u32 flags)
-{
-	crypto_tfm_clear_flags(crypto_aead_tfm(tfm), flags);
-}
-
-static inline int crypto_aead_setkey(struct crypto_aead *tfm, const u8 *key,
-				     unsigned int keylen)
-{
-	struct aead_tfm *crt = crypto_aead_crt(tfm);
-
-	return crt->setkey(crt->base, key, keylen);
-}
-
-int crypto_aead_setauthsize(struct crypto_aead *tfm, unsigned int authsize);
-
-static inline struct crypto_aead *crypto_aead_reqtfm(struct aead_request *req)
-{
-	return __crypto_aead_cast(req->base.tfm);
-}
-
-static inline int crypto_aead_encrypt(struct aead_request *req)
-{
-	return crypto_aead_crt(crypto_aead_reqtfm(req))->encrypt(req);
-}
-
-static inline int crypto_aead_decrypt(struct aead_request *req)
-{
-	return crypto_aead_crt(crypto_aead_reqtfm(req))->decrypt(req);
-}
-
-static inline unsigned int crypto_aead_reqsize(struct crypto_aead *tfm)
-{
-	return crypto_aead_crt(tfm)->reqsize;
-}
-
-static inline void aead_request_set_tfm(struct aead_request *req,
-					struct crypto_aead *tfm)
-{
-	req->base.tfm = crypto_aead_tfm(crypto_aead_crt(tfm)->base);
-}
-
-static inline struct aead_request *aead_request_alloc(struct crypto_aead *tfm,
-						      gfp_t gfp)
-{
-	struct aead_request *req;
-
-	req = kmalloc(sizeof(*req) + crypto_aead_reqsize(tfm), gfp);
-
-	if (likely(req))
-		aead_request_set_tfm(req, tfm);
-
-	return req;
-}
-
-static inline void aead_request_free(struct aead_request *req)
-{
-	kzfree(req);
-}
-
-static inline void aead_request_set_callback(struct aead_request *req,
-					     u32 flags,
-					     crypto_completion_t complete,
-					     void *data)
-{
-	req->base.complete = complete;
-	req->base.data = data;
-	req->base.flags = flags;
-}
-
-static inline void aead_request_set_crypt(struct aead_request *req,
-					  struct scatterlist *src,
-					  struct scatterlist *dst,
-					  unsigned int cryptlen, u8 *iv)
-{
-	req->src = src;
-	req->dst = dst;
-	req->cryptlen = cryptlen;
-	req->iv = iv;
-}
-
-static inline void aead_request_set_assoc(struct aead_request *req,
-					  struct scatterlist *assoc,
-					  unsigned int assoclen)
-{
-	req->assoc = assoc;
-	req->assoclen = assoclen;
-}
-
-static inline struct crypto_blkcipher *__crypto_blkcipher_cast(
-	struct crypto_tfm *tfm)
-{
-	return (struct crypto_blkcipher *)tfm;
-}
-
-static inline struct crypto_blkcipher *crypto_blkcipher_cast(
-	struct crypto_tfm *tfm)
-{
-	BUG_ON(crypto_tfm_alg_type(tfm) != CRYPTO_ALG_TYPE_BLKCIPHER);
-	return __crypto_blkcipher_cast(tfm);
-}
-
-static inline struct crypto_blkcipher *crypto_alloc_blkcipher(
-	const char *alg_name, u32 type, u32 mask)
-{
-	type &= ~CRYPTO_ALG_TYPE_MASK;
-	type |= CRYPTO_ALG_TYPE_BLKCIPHER;
-	mask |= CRYPTO_ALG_TYPE_MASK;
-
-	return __crypto_blkcipher_cast(crypto_alloc_base(alg_name, type, mask));
-}
-
-static inline struct crypto_tfm *crypto_blkcipher_tfm(
-	struct crypto_blkcipher *tfm)
-{
-	return &tfm->base;
-}
-
-static inline void crypto_free_blkcipher(struct crypto_blkcipher *tfm)
-{
-	crypto_free_tfm(crypto_blkcipher_tfm(tfm));
-}
-
-static inline int crypto_has_blkcipher(const char *alg_name, u32 type, u32 mask)
-{
-	type &= ~CRYPTO_ALG_TYPE_MASK;
-	type |= CRYPTO_ALG_TYPE_BLKCIPHER;
-	mask |= CRYPTO_ALG_TYPE_MASK;
-
-	return crypto_has_alg(alg_name, type, mask);
-}
-
-static inline const char *crypto_blkcipher_name(struct crypto_blkcipher *tfm)
-{
-	return crypto_tfm_alg_name(crypto_blkcipher_tfm(tfm));
-}
-
-static inline struct blkcipher_tfm *crypto_blkcipher_crt(
-	struct crypto_blkcipher *tfm)
-{
-	return &crypto_blkcipher_tfm(tfm)->crt_blkcipher;
-}
-
-static inline struct blkcipher_alg *crypto_blkcipher_alg(
-	struct crypto_blkcipher *tfm)
-{
-	return &crypto_blkcipher_tfm(tfm)->__crt_alg->cra_blkcipher;
-}
-
-static inline unsigned int crypto_blkcipher_ivsize(struct crypto_blkcipher *tfm)
-{
-	return crypto_blkcipher_alg(tfm)->ivsize;
-}
-
-static inline unsigned int crypto_blkcipher_blocksize(
-	struct crypto_blkcipher *tfm)
-{
-	return crypto_tfm_alg_blocksize(crypto_blkcipher_tfm(tfm));
-}
-
-static inline unsigned int crypto_blkcipher_alignmask(
-	struct crypto_blkcipher *tfm)
-{
-	return crypto_tfm_alg_alignmask(crypto_blkcipher_tfm(tfm));
-}
-
-static inline u32 crypto_blkcipher_get_flags(struct crypto_blkcipher *tfm)
-{
-	return crypto_tfm_get_flags(crypto_blkcipher_tfm(tfm));
-}
-
-static inline void crypto_blkcipher_set_flags(struct crypto_blkcipher *tfm,
-					      u32 flags)
-{
-	crypto_tfm_set_flags(crypto_blkcipher_tfm(tfm), flags);
-}
-
-static inline void crypto_blkcipher_clear_flags(struct crypto_blkcipher *tfm,
-						u32 flags)
-{
-	crypto_tfm_clear_flags(crypto_blkcipher_tfm(tfm), flags);
-}
-
-static inline int crypto_blkcipher_setkey(struct crypto_blkcipher *tfm,
-					  const u8 *key, unsigned int keylen)
-{
-	return crypto_blkcipher_crt(tfm)->setkey(crypto_blkcipher_tfm(tfm),
-						 key, keylen);
-}
-
-static inline int crypto_blkcipher_encrypt(struct blkcipher_desc *desc,
-					   struct scatterlist *dst,
-					   struct scatterlist *src,
-					   unsigned int nbytes)
-{
-	desc->info = crypto_blkcipher_crt(desc->tfm)->iv;
-	return crypto_blkcipher_crt(desc->tfm)->encrypt(desc, dst, src, nbytes);
-}
-
-static inline int crypto_blkcipher_encrypt_iv(struct blkcipher_desc *desc,
-					      struct scatterlist *dst,
-					      struct scatterlist *src,
-					      unsigned int nbytes)
-{
-	return crypto_blkcipher_crt(desc->tfm)->encrypt(desc, dst, src, nbytes);
-}
-
-static inline int crypto_blkcipher_decrypt(struct blkcipher_desc *desc,
-					   struct scatterlist *dst,
-					   struct scatterlist *src,
-					   unsigned int nbytes)
-{
-	desc->info = crypto_blkcipher_crt(desc->tfm)->iv;
-	return crypto_blkcipher_crt(desc->tfm)->decrypt(desc, dst, src, nbytes);
-}
-
-static inline int crypto_blkcipher_decrypt_iv(struct blkcipher_desc *desc,
-					      struct scatterlist *dst,
-					      struct scatterlist *src,
-					      unsigned int nbytes)
-{
-	return crypto_blkcipher_crt(desc->tfm)->decrypt(desc, dst, src, nbytes);
-}
-
-static inline void crypto_blkcipher_set_iv(struct crypto_blkcipher *tfm,
-					   const u8 *src, unsigned int len)
-{
-	memcpy(crypto_blkcipher_crt(tfm)->iv, src, len);
-}
-
-static inline void crypto_blkcipher_get_iv(struct crypto_blkcipher *tfm,
-					   u8 *dst, unsigned int len)
-{
-	memcpy(dst, crypto_blkcipher_crt(tfm)->iv, len);
-}
-
-static inline struct crypto_cipher *__crypto_cipher_cast(struct crypto_tfm *tfm)
-{
-	return (struct crypto_cipher *)tfm;
-}
-
-static inline struct crypto_cipher *crypto_cipher_cast(struct crypto_tfm *tfm)
-{
-	BUG_ON(crypto_tfm_alg_type(tfm) != CRYPTO_ALG_TYPE_CIPHER);
-	return __crypto_cipher_cast(tfm);
-}
-
-static inline struct crypto_cipher *crypto_alloc_cipher(const char *alg_name,
-							u32 type, u32 mask)
-{
-	type &= ~CRYPTO_ALG_TYPE_MASK;
-	type |= CRYPTO_ALG_TYPE_CIPHER;
-	mask |= CRYPTO_ALG_TYPE_MASK;
-
-	return __crypto_cipher_cast(crypto_alloc_base(alg_name, type, mask));
-}
-
-static inline struct crypto_tfm *crypto_cipher_tfm(struct crypto_cipher *tfm)
-{
-	return &tfm->base;
-}
-
-static inline void crypto_free_cipher(struct crypto_cipher *tfm)
-{
-	crypto_free_tfm(crypto_cipher_tfm(tfm));
-}
-
-static inline int crypto_has_cipher(const char *alg_name, u32 type, u32 mask)
-{
-	type &= ~CRYPTO_ALG_TYPE_MASK;
-	type |= CRYPTO_ALG_TYPE_CIPHER;
-	mask |= CRYPTO_ALG_TYPE_MASK;
-
-	return crypto_has_alg(alg_name, type, mask);
-}
-
-static inline struct cipher_tfm *crypto_cipher_crt(struct crypto_cipher *tfm)
-{
-	return &crypto_cipher_tfm(tfm)->crt_cipher;
-}
-
-static inline unsigned int crypto_cipher_blocksize(struct crypto_cipher *tfm)
-{
-	return crypto_tfm_alg_blocksize(crypto_cipher_tfm(tfm));
-}
-
-static inline unsigned int crypto_cipher_alignmask(struct crypto_cipher *tfm)
-{
-	return crypto_tfm_alg_alignmask(crypto_cipher_tfm(tfm));
-}
-
-static inline u32 crypto_cipher_get_flags(struct crypto_cipher *tfm)
-{
-	return crypto_tfm_get_flags(crypto_cipher_tfm(tfm));
-}
-
-static inline void crypto_cipher_set_flags(struct crypto_cipher *tfm,
-					   u32 flags)
-{
-	crypto_tfm_set_flags(crypto_cipher_tfm(tfm), flags);
-}
-
-static inline void crypto_cipher_clear_flags(struct crypto_cipher *tfm,
-					     u32 flags)
-{
-	crypto_tfm_clear_flags(crypto_cipher_tfm(tfm), flags);
-}
-
-static inline int crypto_cipher_setkey(struct crypto_cipher *tfm,
-                                       const u8 *key, unsigned int keylen)
-{
-	return crypto_cipher_crt(tfm)->cit_setkey(crypto_cipher_tfm(tfm),
-						  key, keylen);
-}
-
-static inline void crypto_cipher_encrypt_one(struct crypto_cipher *tfm,
-					     u8 *dst, const u8 *src)
-{
-	crypto_cipher_crt(tfm)->cit_encrypt_one(crypto_cipher_tfm(tfm),
-						dst, src);
-}
-
-static inline void crypto_cipher_decrypt_one(struct crypto_cipher *tfm,
-					     u8 *dst, const u8 *src)
-{
-	crypto_cipher_crt(tfm)->cit_decrypt_one(crypto_cipher_tfm(tfm),
-						dst, src);
-}
-
-static inline struct crypto_hash *__crypto_hash_cast(struct crypto_tfm *tfm)
-{
-	return (struct crypto_hash *)tfm;
-}
-
-static inline struct crypto_hash *crypto_hash_cast(struct crypto_tfm *tfm)
-{
-	BUG_ON((crypto_tfm_alg_type(tfm) ^ CRYPTO_ALG_TYPE_HASH) &
-	       CRYPTO_ALG_TYPE_HASH_MASK);
-	return __crypto_hash_cast(tfm);
-}
-
-static inline struct crypto_hash *crypto_alloc_hash(const char *alg_name,
-						    u32 type, u32 mask)
-{
-	type &= ~CRYPTO_ALG_TYPE_MASK;
-	mask &= ~CRYPTO_ALG_TYPE_MASK;
-	type |= CRYPTO_ALG_TYPE_HASH;
-	mask |= CRYPTO_ALG_TYPE_HASH_MASK;
-
-	return __crypto_hash_cast(crypto_alloc_base(alg_name, type, mask));
-}
-
-static inline struct crypto_tfm *crypto_hash_tfm(struct crypto_hash *tfm)
-{
-	return &tfm->base;
-}
-
-static inline void crypto_free_hash(struct crypto_hash *tfm)
-{
-	crypto_free_tfm(crypto_hash_tfm(tfm));
-}
-
-static inline int crypto_has_hash(const char *alg_name, u32 type, u32 mask)
-{
-	type &= ~CRYPTO_ALG_TYPE_MASK;
-	mask &= ~CRYPTO_ALG_TYPE_MASK;
-	type |= CRYPTO_ALG_TYPE_HASH;
-	mask |= CRYPTO_ALG_TYPE_HASH_MASK;
-
-	return crypto_has_alg(alg_name, type, mask);
-}
-
-static inline struct hash_tfm *crypto_hash_crt(struct crypto_hash *tfm)
-{
-	return &crypto_hash_tfm(tfm)->crt_hash;
-}
-
-static inline unsigned int crypto_hash_blocksize(struct crypto_hash *tfm)
-{
-	return crypto_tfm_alg_blocksize(crypto_hash_tfm(tfm));
-}
-
-static inline unsigned int crypto_hash_alignmask(struct crypto_hash *tfm)
-{
-	return crypto_tfm_alg_alignmask(crypto_hash_tfm(tfm));
-}
-
-static inline unsigned int crypto_hash_digestsize(struct crypto_hash *tfm)
-{
-	return crypto_hash_crt(tfm)->digestsize;
-}
-
-static inline u32 crypto_hash_get_flags(struct crypto_hash *tfm)
-{
-	return crypto_tfm_get_flags(crypto_hash_tfm(tfm));
-}
-
-static inline void crypto_hash_set_flags(struct crypto_hash *tfm, u32 flags)
-{
-	crypto_tfm_set_flags(crypto_hash_tfm(tfm), flags);
-}
-
-static inline void crypto_hash_clear_flags(struct crypto_hash *tfm, u32 flags)
-{
-	crypto_tfm_clear_flags(crypto_hash_tfm(tfm), flags);
-}
-
-static inline int crypto_hash_init(struct hash_desc *desc)
-{
-	return crypto_hash_crt(desc->tfm)->init(desc);
-}
-
-static inline int crypto_hash_update(struct hash_desc *desc,
-				     struct scatterlist *sg,
-				     unsigned int nbytes)
-{
-	return crypto_hash_crt(desc->tfm)->update(desc, sg, nbytes);
-}
-
-static inline int crypto_hash_final(struct hash_desc *desc, u8 *out)
-{
-	return crypto_hash_crt(desc->tfm)->final(desc, out);
-}
-
-static inline int crypto_hash_digest(struct hash_desc *desc,
-				     struct scatterlist *sg,
-				     unsigned int nbytes, u8 *out)
-{
-	return crypto_hash_crt(desc->tfm)->digest(desc, sg, nbytes, out);
-}
-
-static inline int crypto_hash_setkey(struct crypto_hash *hash,
-				     const u8 *key, unsigned int keylen)
-{
-	return crypto_hash_crt(hash)->setkey(hash, key, keylen);
-}
-
-static inline struct crypto_comp *__crypto_comp_cast(struct crypto_tfm *tfm)
-{
-	return (struct crypto_comp *)tfm;
-}
-
-static inline struct crypto_comp *crypto_comp_cast(struct crypto_tfm *tfm)
-{
-	BUG_ON((crypto_tfm_alg_type(tfm) ^ CRYPTO_ALG_TYPE_COMPRESS) &
-	       CRYPTO_ALG_TYPE_MASK);
-	return __crypto_comp_cast(tfm);
-}
-
-static inline struct crypto_comp *crypto_alloc_comp(const char *alg_name,
-						    u32 type, u32 mask)
-{
-	type &= ~CRYPTO_ALG_TYPE_MASK;
-	type |= CRYPTO_ALG_TYPE_COMPRESS;
-	mask |= CRYPTO_ALG_TYPE_MASK;
-
-	return __crypto_comp_cast(crypto_alloc_base(alg_name, type, mask));
-}
-
-static inline struct crypto_tfm *crypto_comp_tfm(struct crypto_comp *tfm)
-{
-	return &tfm->base;
-}
-
-static inline void crypto_free_comp(struct crypto_comp *tfm)
-{
-	crypto_free_tfm(crypto_comp_tfm(tfm));
-}
-
-static inline int crypto_has_comp(const char *alg_name, u32 type, u32 mask)
-{
-	type &= ~CRYPTO_ALG_TYPE_MASK;
-	type |= CRYPTO_ALG_TYPE_COMPRESS;
-	mask |= CRYPTO_ALG_TYPE_MASK;
-
-	return crypto_has_alg(alg_name, type, mask);
-}
-
-static inline const char *crypto_comp_name(struct crypto_comp *tfm)
-{
-	return crypto_tfm_alg_name(crypto_comp_tfm(tfm));
-}
-
-static inline struct compress_tfm *crypto_comp_crt(struct crypto_comp *tfm)
-{
-	return &crypto_comp_tfm(tfm)->crt_compress;
-}
-
-static inline int crypto_comp_compress(struct crypto_comp *tfm,
-                                       const u8 *src, unsigned int slen,
-                                       u8 *dst, unsigned int *dlen)
-{
-	return crypto_comp_crt(tfm)->cot_compress(crypto_comp_tfm(tfm),
-						  src, slen, dst, dlen);
-}
-
-static inline int crypto_comp_decompress(struct crypto_comp *tfm,
-                                         const u8 *src, unsigned int slen,
-                                         u8 *dst, unsigned int *dlen)
-{
-	return crypto_comp_crt(tfm)->cot_decompress(crypto_comp_tfm(tfm),
-						    src, slen, dst, dlen);
-}
-
-#endif	/* _LINUX_CRYPTO_H */
-
diff --git a/ANDROID_3.4.5/include/linux/cryptohash.h b/ANDROID_3.4.5/include/linux/cryptohash.h
deleted file mode 100644
index 2cd9f1cf..00000000
--- a/ANDROID_3.4.5/include/linux/cryptohash.h
+++ /dev/null
@@ -1,18 +0,0 @@
-#ifndef __CRYPTOHASH_H
-#define __CRYPTOHASH_H
-
-#define SHA_DIGEST_WORDS 5
-#define SHA_MESSAGE_BYTES (512 /*bits*/ / 8)
-#define SHA_WORKSPACE_WORDS 16
-
-void sha_init(__u32 *buf);
-void sha_transform(__u32 *digest, const char *data, __u32 *W);
-
-#define MD5_DIGEST_WORDS 4
-#define MD5_MESSAGE_BYTES 64
-
-void md5_transform(__u32 *hash, __u32 const *in);
-
-__u32 half_md4_transform(__u32 buf[4], __u32 const in[8]);
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/cryptouser.h b/ANDROID_3.4.5/include/linux/cryptouser.h
deleted file mode 100644
index 4abf2ea6..00000000
--- a/ANDROID_3.4.5/include/linux/cryptouser.h
+++ /dev/null
@@ -1,105 +0,0 @@
-/*
- * Crypto user configuration API.
- *
- * Copyright (C) 2011 secunet Security Networks AG
- * Copyright (C) 2011 Steffen Klassert <steffen.klassert@secunet.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-/* Netlink configuration messages.  */
-enum {
-	CRYPTO_MSG_BASE = 0x10,
-	CRYPTO_MSG_NEWALG = 0x10,
-	CRYPTO_MSG_DELALG,
-	CRYPTO_MSG_UPDATEALG,
-	CRYPTO_MSG_GETALG,
-	__CRYPTO_MSG_MAX
-};
-#define CRYPTO_MSG_MAX (__CRYPTO_MSG_MAX - 1)
-#define CRYPTO_NR_MSGTYPES (CRYPTO_MSG_MAX + 1 - CRYPTO_MSG_BASE)
-
-#define CRYPTO_MAX_NAME CRYPTO_MAX_ALG_NAME
-
-/* Netlink message attributes.  */
-enum crypto_attr_type_t {
-	CRYPTOCFGA_UNSPEC,
-	CRYPTOCFGA_PRIORITY_VAL,	/* __u32 */
-	CRYPTOCFGA_REPORT_LARVAL,	/* struct crypto_report_larval */
-	CRYPTOCFGA_REPORT_HASH,		/* struct crypto_report_hash */
-	CRYPTOCFGA_REPORT_BLKCIPHER,	/* struct crypto_report_blkcipher */
-	CRYPTOCFGA_REPORT_AEAD,		/* struct crypto_report_aead */
-	CRYPTOCFGA_REPORT_COMPRESS,	/* struct crypto_report_comp */
-	CRYPTOCFGA_REPORT_RNG,		/* struct crypto_report_rng */
-	CRYPTOCFGA_REPORT_CIPHER,	/* struct crypto_report_cipher */
-	__CRYPTOCFGA_MAX
-
-#define CRYPTOCFGA_MAX (__CRYPTOCFGA_MAX - 1)
-};
-
-struct crypto_user_alg {
-	char cru_name[CRYPTO_MAX_ALG_NAME];
-	char cru_driver_name[CRYPTO_MAX_ALG_NAME];
-	char cru_module_name[CRYPTO_MAX_ALG_NAME];
-	__u32 cru_type;
-	__u32 cru_mask;
-	__u32 cru_refcnt;
-	__u32 cru_flags;
-};
-
-struct crypto_report_larval {
-	char type[CRYPTO_MAX_NAME];
-};
-
-struct crypto_report_hash {
-	char type[CRYPTO_MAX_NAME];
-	unsigned int blocksize;
-	unsigned int digestsize;
-};
-
-struct crypto_report_cipher {
-	char type[CRYPTO_MAX_ALG_NAME];
-	unsigned int blocksize;
-	unsigned int min_keysize;
-	unsigned int max_keysize;
-};
-
-struct crypto_report_blkcipher {
-	char type[CRYPTO_MAX_NAME];
-	char geniv[CRYPTO_MAX_NAME];
-	unsigned int blocksize;
-	unsigned int min_keysize;
-	unsigned int max_keysize;
-	unsigned int ivsize;
-};
-
-struct crypto_report_aead {
-	char type[CRYPTO_MAX_NAME];
-	char geniv[CRYPTO_MAX_NAME];
-	unsigned int blocksize;
-	unsigned int maxauthsize;
-	unsigned int ivsize;
-};
-
-struct crypto_report_comp {
-	char type[CRYPTO_MAX_NAME];
-};
-
-struct crypto_report_rng {
-	char type[CRYPTO_MAX_NAME];
-	unsigned int seedsize;
-};
-
-#define CRYPTO_REPORT_MAXSIZE (sizeof(struct crypto_user_alg) + \
-			       sizeof(struct crypto_report_blkcipher))
diff --git a/ANDROID_3.4.5/include/linux/cs5535.h b/ANDROID_3.4.5/include/linux/cs5535.h
deleted file mode 100644
index c077aec3..00000000
--- a/ANDROID_3.4.5/include/linux/cs5535.h
+++ /dev/null
@@ -1,238 +0,0 @@
-/*
- * AMD CS5535/CS5536 definitions
- * Copyright (C) 2006  Advanced Micro Devices, Inc.
- * Copyright (C) 2009  Andres Salomon <dilinger@collabora.co.uk>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of version 2 of the GNU General Public License
- * as published by the Free Software Foundation.
- */
-
-#ifndef _CS5535_H
-#define _CS5535_H
-
-#include <asm/msr.h>
-
-/* MSRs */
-#define MSR_GLIU_P2D_RO0	0x10000029
-
-#define MSR_LX_GLD_MSR_CONFIG	0x48002001
-#define MSR_LX_MSR_PADSEL	0x48002011	/* NOT 0x48000011; the data
-						 * sheet has the wrong value */
-#define MSR_GLCP_SYS_RSTPLL	0x4C000014
-#define MSR_GLCP_DOTPLL		0x4C000015
-
-#define MSR_LBAR_SMB		0x5140000B
-#define MSR_LBAR_GPIO		0x5140000C
-#define MSR_LBAR_MFGPT		0x5140000D
-#define MSR_LBAR_ACPI		0x5140000E
-#define MSR_LBAR_PMS		0x5140000F
-
-#define MSR_DIVIL_SOFT_RESET	0x51400017
-
-#define MSR_PIC_YSEL_LOW	0x51400020
-#define MSR_PIC_YSEL_HIGH	0x51400021
-#define MSR_PIC_ZSEL_LOW	0x51400022
-#define MSR_PIC_ZSEL_HIGH	0x51400023
-#define MSR_PIC_IRQM_LPC	0x51400025
-
-#define MSR_MFGPT_IRQ		0x51400028
-#define MSR_MFGPT_NR		0x51400029
-#define MSR_MFGPT_SETUP		0x5140002B
-
-#define MSR_RTC_DOMA_OFFSET	0x51400055
-#define MSR_RTC_MONA_OFFSET	0x51400056
-#define MSR_RTC_CEN_OFFSET	0x51400057
-
-#define MSR_LX_SPARE_MSR	0x80000011	/* DC-specific */
-
-#define MSR_GX_GLD_MSR_CONFIG	0xC0002001
-#define MSR_GX_MSR_PADSEL	0xC0002011
-
-static inline int cs5535_pic_unreqz_select_high(unsigned int group,
-						unsigned int irq)
-{
-	uint32_t lo, hi;
-
-	rdmsr(MSR_PIC_ZSEL_HIGH, lo, hi);
-	lo &= ~(0xF << (group * 4));
-	lo |= (irq & 0xF) << (group * 4);
-	wrmsr(MSR_PIC_ZSEL_HIGH, lo, hi);
-	return 0;
-}
-
-/* PIC registers */
-#define CS5536_PIC_INT_SEL1	0x4d0
-#define CS5536_PIC_INT_SEL2	0x4d1
-
-/* resource sizes */
-#define LBAR_GPIO_SIZE		0xFF
-#define LBAR_MFGPT_SIZE		0x40
-#define LBAR_ACPI_SIZE		0x40
-#define LBAR_PMS_SIZE		0x80
-
-/*
- * PMC registers (PMS block)
- * It is only safe to access these registers as dword accesses.
- * See CS5536 Specification Update erratas 17 & 18
- */
-#define CS5536_PM_SCLK		0x10
-#define CS5536_PM_IN_SLPCTL	0x20
-#define CS5536_PM_WKXD		0x34
-#define CS5536_PM_WKD		0x30
-#define CS5536_PM_SSC		0x54
-
-/*
- * PM registers (ACPI block)
- * It is only safe to access these registers as dword accesses.
- * See CS5536 Specification Update erratas 17 & 18
- */
-#define CS5536_PM1_STS		0x00
-#define CS5536_PM1_EN		0x02
-#define CS5536_PM1_CNT		0x08
-#define CS5536_PM_GPE0_STS	0x18
-#define CS5536_PM_GPE0_EN	0x1c
-
-/* CS5536_PM1_STS bits */
-#define CS5536_WAK_FLAG		(1 << 15)
-#define CS5536_PWRBTN_FLAG	(1 << 8)
-
-/* CS5536_PM1_EN bits */
-#define CS5536_PM_PWRBTN	(1 << 8)
-#define CS5536_PM_RTC		(1 << 10)
-
-/* CS5536_PM_GPE0_STS bits */
-#define CS5536_GPIOM7_PME_FLAG	(1 << 31)
-#define CS5536_GPIOM6_PME_FLAG	(1 << 30)
-
-/* CS5536_PM_GPE0_EN bits */
-#define CS5536_GPIOM7_PME_EN	(1 << 31)
-#define CS5536_GPIOM6_PME_EN	(1 << 30)
-
-/* VSA2 magic values */
-#define VSA_VRC_INDEX		0xAC1C
-#define VSA_VRC_DATA		0xAC1E
-#define VSA_VR_UNLOCK		0xFC53  /* unlock virtual register */
-#define VSA_VR_SIGNATURE	0x0003
-#define VSA_VR_MEM_SIZE		0x0200
-#define AMD_VSA_SIG		0x4132  /* signature is ascii 'VSA2' */
-#define GSW_VSA_SIG		0x534d  /* General Software signature */
-
-#include <linux/io.h>
-
-static inline int cs5535_has_vsa2(void)
-{
-	static int has_vsa2 = -1;
-
-	if (has_vsa2 == -1) {
-		uint16_t val;
-
-		/*
-		 * The VSA has virtual registers that we can query for a
-		 * signature.
-		 */
-		outw(VSA_VR_UNLOCK, VSA_VRC_INDEX);
-		outw(VSA_VR_SIGNATURE, VSA_VRC_INDEX);
-
-		val = inw(VSA_VRC_DATA);
-		has_vsa2 = (val == AMD_VSA_SIG || val == GSW_VSA_SIG);
-	}
-
-	return has_vsa2;
-}
-
-/* GPIOs */
-#define GPIO_OUTPUT_VAL		0x00
-#define GPIO_OUTPUT_ENABLE	0x04
-#define GPIO_OUTPUT_OPEN_DRAIN	0x08
-#define GPIO_OUTPUT_INVERT	0x0C
-#define GPIO_OUTPUT_AUX1	0x10
-#define GPIO_OUTPUT_AUX2	0x14
-#define GPIO_PULL_UP		0x18
-#define GPIO_PULL_DOWN		0x1C
-#define GPIO_INPUT_ENABLE	0x20
-#define GPIO_INPUT_INVERT	0x24
-#define GPIO_INPUT_FILTER	0x28
-#define GPIO_INPUT_EVENT_COUNT	0x2C
-#define GPIO_READ_BACK		0x30
-#define GPIO_INPUT_AUX1		0x34
-#define GPIO_EVENTS_ENABLE	0x38
-#define GPIO_LOCK_ENABLE	0x3C
-#define GPIO_POSITIVE_EDGE_EN	0x40
-#define GPIO_NEGATIVE_EDGE_EN	0x44
-#define GPIO_POSITIVE_EDGE_STS	0x48
-#define GPIO_NEGATIVE_EDGE_STS	0x4C
-
-#define GPIO_FLTR7_AMOUNT	0xD8
-
-#define GPIO_MAP_X		0xE0
-#define GPIO_MAP_Y		0xE4
-#define GPIO_MAP_Z		0xE8
-#define GPIO_MAP_W		0xEC
-
-#define GPIO_FE7_SEL		0xF7
-
-void cs5535_gpio_set(unsigned offset, unsigned int reg);
-void cs5535_gpio_clear(unsigned offset, unsigned int reg);
-int cs5535_gpio_isset(unsigned offset, unsigned int reg);
-int cs5535_gpio_set_irq(unsigned group, unsigned irq);
-void cs5535_gpio_setup_event(unsigned offset, int pair, int pme);
-
-/* MFGPTs */
-
-#define MFGPT_MAX_TIMERS	8
-#define MFGPT_TIMER_ANY		(-1)
-
-#define MFGPT_DOMAIN_WORKING	1
-#define MFGPT_DOMAIN_STANDBY	2
-#define MFGPT_DOMAIN_ANY	(MFGPT_DOMAIN_WORKING | MFGPT_DOMAIN_STANDBY)
-
-#define MFGPT_CMP1		0
-#define MFGPT_CMP2		1
-
-#define MFGPT_EVENT_IRQ		0
-#define MFGPT_EVENT_NMI		1
-#define MFGPT_EVENT_RESET	3
-
-#define MFGPT_REG_CMP1		0
-#define MFGPT_REG_CMP2		2
-#define MFGPT_REG_COUNTER	4
-#define MFGPT_REG_SETUP		6
-
-#define MFGPT_SETUP_CNTEN	(1 << 15)
-#define MFGPT_SETUP_CMP2	(1 << 14)
-#define MFGPT_SETUP_CMP1	(1 << 13)
-#define MFGPT_SETUP_SETUP	(1 << 12)
-#define MFGPT_SETUP_STOPEN	(1 << 11)
-#define MFGPT_SETUP_EXTEN	(1 << 10)
-#define MFGPT_SETUP_REVEN	(1 << 5)
-#define MFGPT_SETUP_CLKSEL	(1 << 4)
-
-struct cs5535_mfgpt_timer;
-
-extern uint16_t cs5535_mfgpt_read(struct cs5535_mfgpt_timer *timer,
-		uint16_t reg);
-extern void cs5535_mfgpt_write(struct cs5535_mfgpt_timer *timer, uint16_t reg,
-		uint16_t value);
-
-extern int cs5535_mfgpt_toggle_event(struct cs5535_mfgpt_timer *timer, int cmp,
-		int event, int enable);
-extern int cs5535_mfgpt_set_irq(struct cs5535_mfgpt_timer *timer, int cmp,
-		int *irq, int enable);
-extern struct cs5535_mfgpt_timer *cs5535_mfgpt_alloc_timer(int timer,
-		int domain);
-extern void cs5535_mfgpt_free_timer(struct cs5535_mfgpt_timer *timer);
-
-static inline int cs5535_mfgpt_setup_irq(struct cs5535_mfgpt_timer *timer,
-		int cmp, int *irq)
-{
-	return cs5535_mfgpt_set_irq(timer, cmp, irq, 1);
-}
-
-static inline int cs5535_mfgpt_release_irq(struct cs5535_mfgpt_timer *timer,
-		int cmp, int *irq)
-{
-	return cs5535_mfgpt_set_irq(timer, cmp, irq, 0);
-}
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/ctype.h b/ANDROID_3.4.5/include/linux/ctype.h
deleted file mode 100644
index 8acfe312..00000000
--- a/ANDROID_3.4.5/include/linux/ctype.h
+++ /dev/null
@@ -1,64 +0,0 @@
-#ifndef _LINUX_CTYPE_H
-#define _LINUX_CTYPE_H
-
-/*
- * NOTE! This ctype does not handle EOF like the standard C
- * library is required to.
- */
-
-#define _U	0x01	/* upper */
-#define _L	0x02	/* lower */
-#define _D	0x04	/* digit */
-#define _C	0x08	/* cntrl */
-#define _P	0x10	/* punct */
-#define _S	0x20	/* white space (space/lf/tab) */
-#define _X	0x40	/* hex digit */
-#define _SP	0x80	/* hard space (0x20) */
-
-extern const unsigned char _ctype[];
-
-#define __ismask(x) (_ctype[(int)(unsigned char)(x)])
-
-#define isalnum(c)	((__ismask(c)&(_U|_L|_D)) != 0)
-#define isalpha(c)	((__ismask(c)&(_U|_L)) != 0)
-#define iscntrl(c)	((__ismask(c)&(_C)) != 0)
-#define isdigit(c)	((__ismask(c)&(_D)) != 0)
-#define isgraph(c)	((__ismask(c)&(_P|_U|_L|_D)) != 0)
-#define islower(c)	((__ismask(c)&(_L)) != 0)
-#define isprint(c)	((__ismask(c)&(_P|_U|_L|_D|_SP)) != 0)
-#define ispunct(c)	((__ismask(c)&(_P)) != 0)
-/* Note: isspace() must return false for %NUL-terminator */
-#define isspace(c)	((__ismask(c)&(_S)) != 0)
-#define isupper(c)	((__ismask(c)&(_U)) != 0)
-#define isxdigit(c)	((__ismask(c)&(_D|_X)) != 0)
-
-#define isascii(c) (((unsigned char)(c))<=0x7f)
-#define toascii(c) (((unsigned char)(c))&0x7f)
-
-static inline unsigned char __tolower(unsigned char c)
-{
-	if (isupper(c))
-		c -= 'A'-'a';
-	return c;
-}
-
-static inline unsigned char __toupper(unsigned char c)
-{
-	if (islower(c))
-		c -= 'a'-'A';
-	return c;
-}
-
-#define tolower(c) __tolower(c)
-#define toupper(c) __toupper(c)
-
-/*
- * Fast implementation of tolower() for internal usage. Do not use in your
- * code.
- */
-static inline char _tolower(const char c)
-{
-	return c | 0x20;
-}
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/cuda.h b/ANDROID_3.4.5/include/linux/cuda.h
deleted file mode 100644
index 9f9865ff..00000000
--- a/ANDROID_3.4.5/include/linux/cuda.h
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- * Definitions for talking to the CUDA.  The CUDA is a microcontroller
- * which controls the ADB, system power, RTC, and various other things.
- *
- * Copyright (C) 1996 Paul Mackerras.
- */
-
-#ifndef _LINUX_CUDA_H
-#define _LINUX_CUDA_H
-
-/* CUDA commands (2nd byte) */
-#define CUDA_WARM_START		0
-#define CUDA_AUTOPOLL		1
-#define CUDA_GET_6805_ADDR	2
-#define CUDA_GET_TIME		3
-#define CUDA_GET_PRAM		7
-#define CUDA_SET_6805_ADDR	8
-#define CUDA_SET_TIME		9
-#define CUDA_POWERDOWN		0xa
-#define CUDA_POWERUP_TIME	0xb
-#define CUDA_SET_PRAM		0xc
-#define CUDA_MS_RESET		0xd
-#define CUDA_SEND_DFAC		0xe
-#define CUDA_RESET_SYSTEM	0x11
-#define CUDA_SET_IPL		0x12
-#define CUDA_SET_AUTO_RATE	0x14
-#define CUDA_GET_AUTO_RATE	0x16
-#define CUDA_SET_DEVICE_LIST	0x19
-#define CUDA_GET_DEVICE_LIST	0x1a
-#define CUDA_GET_SET_IIC	0x22
-
-#ifdef __KERNEL__
-
-extern int find_via_cuda(void);
-extern int cuda_request(struct adb_request *req,
-			void (*done)(struct adb_request *), int nbytes, ...);
-extern void cuda_poll(void);
-
-#endif	/* __KERNEL */
-
-#endif /* _LINUX_CUDA_H */
diff --git a/ANDROID_3.4.5/include/linux/cyclades.h b/ANDROID_3.4.5/include/linux/cyclades.h
deleted file mode 100644
index a5049eaf..00000000
--- a/ANDROID_3.4.5/include/linux/cyclades.h
+++ /dev/null
@@ -1,784 +0,0 @@
-/* $Revision: 3.0 $$Date: 1998/11/02 14:20:59 $
- * linux/include/linux/cyclades.h
- *
- * This file was initially written by
- * Randolph Bentson <bentson@grieg.seaslug.org> and is maintained by
- * Ivan Passos <ivan@cyclades.com>.
- *
- * This file contains the general definitions for the cyclades.c driver
- *$Log: cyclades.h,v $
- *Revision 3.1  2002/01/29 11:36:16  henrique
- *added throttle field on struct cyclades_port to indicate whether the
- *port is throttled or not
- *
- *Revision 3.1  2000/04/19 18:52:52  ivan
- *converted address fields to unsigned long and added fields for physical
- *addresses on cyclades_card structure;
- *
- *Revision 3.0  1998/11/02 14:20:59  ivan
- *added nports field on cyclades_card structure;
- *
- *Revision 2.5  1998/08/03 16:57:01  ivan
- *added cyclades_idle_stats structure;
- * 
- *Revision 2.4  1998/06/01 12:09:53  ivan
- *removed closing_wait2 from cyclades_port structure;
- *
- *Revision 2.3  1998/03/16 18:01:12  ivan
- *changes in the cyclades_port structure to get it closer to the 
- *standard serial port structure;
- *added constants for new ioctls;
- *
- *Revision 2.2  1998/02/17 16:50:00  ivan
- *changes in the cyclades_port structure (addition of shutdown_wait and 
- *chip_rev variables);
- *added constants for new ioctls and for CD1400 rev. numbers.
- *
- *Revision 2.1	1997/10/24 16:03:00  ivan
- *added rflow (which allows enabling the CD1400 special flow control 
- *feature) and rtsdtr_inv (which allows DTR/RTS pin inversion) to 
- *cyclades_port structure;
- *added Alpha support
- *
- *Revision 2.0  1997/06/30 10:30:00  ivan
- *added some new doorbell command constants related to IOCTLW and
- *UART error signaling
- *
- *Revision 1.8  1997/06/03 15:30:00  ivan
- *added constant ZFIRM_HLT
- *added constant CyPCI_Ze_win ( = 2 * Cy_PCI_Zwin)
- *
- *Revision 1.7  1997/03/26 10:30:00  daniel
- *new entries at the end of cyclades_port struct to reallocate
- *variables illegally allocated within card memory.
- *
- *Revision 1.6  1996/09/09 18:35:30  bentson
- *fold in changes for Cyclom-Z -- including structures for
- *communicating with board as well modest changes to original
- *structures to support new features.
- *
- *Revision 1.5  1995/11/13 21:13:31  bentson
- *changes suggested by Michael Chastain <mec@duracef.shout.net>
- *to support use of this file in non-kernel applications
- *
- *
- */
-
-#ifndef _LINUX_CYCLADES_H
-#define _LINUX_CYCLADES_H
-
-#include <linux/types.h>
-
-struct cyclades_monitor {
-        unsigned long           int_count;
-        unsigned long           char_count;
-        unsigned long           char_max;
-        unsigned long           char_last;
-};
-
-/*
- * These stats all reflect activity since the device was last initialized.
- * (i.e., since the port was opened with no other processes already having it
- * open)
- */
-struct cyclades_idle_stats {
-    __kernel_time_t in_use;	/* Time device has been in use (secs) */
-    __kernel_time_t recv_idle;	/* Time since last char received (secs) */
-    __kernel_time_t xmit_idle;	/* Time since last char transmitted (secs) */
-    unsigned long  recv_bytes;	/* Bytes received */
-    unsigned long  xmit_bytes;	/* Bytes transmitted */
-    unsigned long  overruns;	/* Input overruns */
-    unsigned long  frame_errs;	/* Input framing errors */
-    unsigned long  parity_errs;	/* Input parity errors */
-};
-
-#define CYCLADES_MAGIC  0x4359
-
-#define CYGETMON                0x435901
-#define CYGETTHRESH             0x435902
-#define CYSETTHRESH             0x435903
-#define CYGETDEFTHRESH          0x435904
-#define CYSETDEFTHRESH          0x435905
-#define CYGETTIMEOUT            0x435906
-#define CYSETTIMEOUT            0x435907
-#define CYGETDEFTIMEOUT         0x435908
-#define CYSETDEFTIMEOUT         0x435909
-#define CYSETRFLOW		0x43590a
-#define CYGETRFLOW		0x43590b
-#define CYSETRTSDTR_INV		0x43590c
-#define CYGETRTSDTR_INV		0x43590d
-#define CYZSETPOLLCYCLE		0x43590e
-#define CYZGETPOLLCYCLE		0x43590f
-#define CYGETCD1400VER		0x435910
-#define	CYSETWAIT		0x435912
-#define	CYGETWAIT		0x435913
-
-/*************** CYCLOM-Z ADDITIONS ***************/
-
-#define CZIOC           ('M' << 8)
-#define CZ_NBOARDS      (CZIOC|0xfa)
-#define CZ_BOOT_START   (CZIOC|0xfb)
-#define CZ_BOOT_DATA    (CZIOC|0xfc)
-#define CZ_BOOT_END     (CZIOC|0xfd)
-#define CZ_TEST         (CZIOC|0xfe)
-
-#define CZ_DEF_POLL	(HZ/25)
-
-#define MAX_BOARD       4       /* Max number of boards */
-#define MAX_DEV         256     /* Max number of ports total */
-#define	CYZ_MAX_SPEED	921600
-
-#define	CYZ_FIFO_SIZE	16
-
-#define CYZ_BOOT_NWORDS 0x100
-struct CYZ_BOOT_CTRL {
-        unsigned short  nboard;
-        int             status[MAX_BOARD];
-        int             nchannel[MAX_BOARD];
-        int             fw_rev[MAX_BOARD];
-        unsigned long   offset;
-        unsigned long   data[CYZ_BOOT_NWORDS];
-};
-
-
-#ifndef DP_WINDOW_SIZE
-/*
- *	Memory Window Sizes
- */
-
-#define	DP_WINDOW_SIZE		(0x00080000)	/* window size 512 Kb */
-#define	ZE_DP_WINDOW_SIZE	(0x00100000)	/* window size 1 Mb (Ze and
-						  8Zo V.2 */
-#define	CTRL_WINDOW_SIZE	(0x00000080)	/* runtime regs 128 bytes */
-
-/*
- *	CUSTOM_REG - Cyclom-Z/PCI Custom Registers Set. The driver
- *	normally will access only interested on the fpga_id, fpga_version,
- *	start_cpu and stop_cpu.
- */
-
-struct	CUSTOM_REG {
-	__u32	fpga_id;		/* FPGA Identification Register */
-	__u32	fpga_version;		/* FPGA Version Number Register */
-	__u32	cpu_start;		/* CPU start Register (write) */
-	__u32	cpu_stop;		/* CPU stop Register (write) */
-	__u32	misc_reg;		/* Miscellaneous Register */
-	__u32	idt_mode;		/* IDT mode Register */
-	__u32	uart_irq_status;	/* UART IRQ status Register */
-	__u32	clear_timer0_irq;	/* Clear timer interrupt Register */
-	__u32	clear_timer1_irq;	/* Clear timer interrupt Register */
-	__u32	clear_timer2_irq;	/* Clear timer interrupt Register */
-	__u32	test_register;		/* Test Register */
-	__u32	test_count;		/* Test Count Register */
-	__u32	timer_select;		/* Timer select register */
-	__u32	pr_uart_irq_status;	/* Prioritized UART IRQ stat Reg */
-	__u32	ram_wait_state;		/* RAM wait-state Register */
-	__u32	uart_wait_state;	/* UART wait-state Register */
-	__u32	timer_wait_state;	/* timer wait-state Register */
-	__u32	ack_wait_state;		/* ACK wait State Register */
-};
-
-/*
- *	RUNTIME_9060 - PLX PCI9060ES local configuration and shared runtime
- *	registers. This structure can be used to access the 9060 registers
- *	(memory mapped).
- */
-
-struct RUNTIME_9060 {
-	__u32	loc_addr_range;	/* 00h - Local Address Range */
-	__u32	loc_addr_base;	/* 04h - Local Address Base */
-	__u32	loc_arbitr;	/* 08h - Local Arbitration */
-	__u32	endian_descr;	/* 0Ch - Big/Little Endian Descriptor */
-	__u32	loc_rom_range;	/* 10h - Local ROM Range */
-	__u32	loc_rom_base;	/* 14h - Local ROM Base */
-	__u32	loc_bus_descr;	/* 18h - Local Bus descriptor */
-	__u32	loc_range_mst;	/* 1Ch - Local Range for Master to PCI */
-	__u32	loc_base_mst;	/* 20h - Local Base for Master PCI */
-	__u32	loc_range_io;	/* 24h - Local Range for Master IO */
-	__u32	pci_base_mst;	/* 28h - PCI Base for Master PCI */
-	__u32	pci_conf_io;	/* 2Ch - PCI configuration for Master IO */
-	__u32	filler1;	/* 30h */
-	__u32	filler2;	/* 34h */
-	__u32	filler3;	/* 38h */
-	__u32	filler4;	/* 3Ch */
-	__u32	mail_box_0;	/* 40h - Mail Box 0 */
-	__u32	mail_box_1;	/* 44h - Mail Box 1 */
-	__u32	mail_box_2;	/* 48h - Mail Box 2 */
-	__u32	mail_box_3;	/* 4Ch - Mail Box 3 */
-	__u32	filler5;	/* 50h */
-	__u32	filler6;	/* 54h */
-	__u32	filler7;	/* 58h */
-	__u32	filler8;	/* 5Ch */
-	__u32	pci_doorbell;	/* 60h - PCI to Local Doorbell */
-	__u32	loc_doorbell;	/* 64h - Local to PCI Doorbell */
-	__u32	intr_ctrl_stat;	/* 68h - Interrupt Control/Status */
-	__u32	init_ctrl;	/* 6Ch - EEPROM control, Init Control, etc */
-};
-
-/* Values for the Local Base Address re-map register */
-
-#define	WIN_RAM		0x00000001L	/* set the sliding window to RAM */
-#define	WIN_CREG	0x14000001L	/* set the window to custom Registers */
-
-/* Values timer select registers */
-
-#define	TIMER_BY_1M	0x00		/* clock divided by 1M */
-#define	TIMER_BY_256K	0x01		/* clock divided by 256k */
-#define	TIMER_BY_128K	0x02		/* clock divided by 128k */
-#define	TIMER_BY_32K	0x03		/* clock divided by 32k */
-
-/****************** ****************** *******************/
-#endif
-
-#ifndef ZFIRM_ID
-/* #include "zfwint.h" */
-/****************** ****************** *******************/
-/*
- *	This file contains the definitions for interfacing with the
- *	Cyclom-Z ZFIRM Firmware.
- */
-
-/* General Constant definitions */
-
-#define	MAX_CHAN	64		/* max number of channels per board */
-
-/* firmware id structure (set after boot) */
-
-#define ID_ADDRESS	0x00000180L	/* signature/pointer address */
-#define	ZFIRM_ID	0x5557465AL	/* ZFIRM/U signature */
-#define	ZFIRM_HLT	0x59505B5CL	/* ZFIRM needs external power supply */
-#define	ZFIRM_RST	0x56040674L	/* RST signal (due to FW reset) */
-
-#define	ZF_TINACT_DEF	1000		/* default inactivity timeout 
-					   (1000 ms) */
-#define	ZF_TINACT	ZF_TINACT_DEF
-
-struct	FIRM_ID {
-	__u32	signature;		/* ZFIRM/U signature */
-	__u32	zfwctrl_addr;		/* pointer to ZFW_CTRL structure */
-};
-
-/* Op. System id */
-
-#define	C_OS_LINUX	0x00000030	/* generic Linux system */
-
-/* channel op_mode */
-
-#define	C_CH_DISABLE	0x00000000	/* channel is disabled */
-#define	C_CH_TXENABLE	0x00000001	/* channel Tx enabled */
-#define	C_CH_RXENABLE	0x00000002	/* channel Rx enabled */
-#define	C_CH_ENABLE	0x00000003	/* channel Tx/Rx enabled */
-#define	C_CH_LOOPBACK	0x00000004	/* Loopback mode */
-
-/* comm_parity - parity */
-
-#define	C_PR_NONE	0x00000000	/* None */
-#define	C_PR_ODD	0x00000001	/* Odd */
-#define C_PR_EVEN	0x00000002	/* Even */
-#define C_PR_MARK	0x00000004	/* Mark */
-#define C_PR_SPACE	0x00000008	/* Space */
-#define C_PR_PARITY	0x000000ff
-
-#define	C_PR_DISCARD	0x00000100	/* discard char with frame/par error */
-#define C_PR_IGNORE	0x00000200	/* ignore frame/par error */
-
-/* comm_data_l - data length and stop bits */
-
-#define C_DL_CS5	0x00000001
-#define C_DL_CS6	0x00000002
-#define C_DL_CS7	0x00000004
-#define C_DL_CS8	0x00000008
-#define	C_DL_CS		0x0000000f
-#define C_DL_1STOP	0x00000010
-#define C_DL_15STOP	0x00000020
-#define C_DL_2STOP	0x00000040
-#define	C_DL_STOP	0x000000f0
-
-/* interrupt enabling/status */
-
-#define	C_IN_DISABLE	0x00000000	/* zero, disable interrupts */
-#define	C_IN_TXBEMPTY	0x00000001	/* tx buffer empty */
-#define	C_IN_TXLOWWM	0x00000002	/* tx buffer below LWM */
-#define	C_IN_RXHIWM	0x00000010	/* rx buffer above HWM */
-#define	C_IN_RXNNDT	0x00000020	/* rx no new data timeout */
-#define	C_IN_MDCD	0x00000100	/* modem DCD change */
-#define	C_IN_MDSR	0x00000200	/* modem DSR change */
-#define	C_IN_MRI	0x00000400	/* modem RI change */
-#define	C_IN_MCTS	0x00000800	/* modem CTS change */
-#define	C_IN_RXBRK	0x00001000	/* Break received */
-#define	C_IN_PR_ERROR	0x00002000	/* parity error */
-#define	C_IN_FR_ERROR	0x00004000	/* frame error */
-#define C_IN_OVR_ERROR  0x00008000      /* overrun error */
-#define C_IN_RXOFL	0x00010000      /* RX buffer overflow */
-#define C_IN_IOCTLW	0x00020000      /* I/O control w/ wait */
-#define C_IN_MRTS	0x00040000	/* modem RTS drop */
-#define C_IN_ICHAR	0x00080000
- 
-/* flow control */
-
-#define	C_FL_OXX	0x00000001	/* output Xon/Xoff flow control */
-#define	C_FL_IXX	0x00000002	/* output Xon/Xoff flow control */
-#define C_FL_OIXANY	0x00000004	/* output Xon/Xoff (any xon) */
-#define	C_FL_SWFLOW	0x0000000f
-
-/* flow status */
-
-#define	C_FS_TXIDLE	0x00000000	/* no Tx data in the buffer or UART */
-#define	C_FS_SENDING	0x00000001	/* UART is sending data */
-#define	C_FS_SWFLOW	0x00000002	/* Tx is stopped by received Xoff */
-
-/* rs_control/rs_status RS-232 signals */
-
-#define C_RS_PARAM	0x80000000	/* Indicates presence of parameter in 
-					   IOCTLM command */
-#define	C_RS_RTS	0x00000001	/* RTS */
-#define	C_RS_DTR	0x00000004	/* DTR */
-#define	C_RS_DCD	0x00000100	/* CD */
-#define	C_RS_DSR	0x00000200	/* DSR */
-#define	C_RS_RI		0x00000400	/* RI */
-#define	C_RS_CTS	0x00000800	/* CTS */
-
-/* commands Host <-> Board */
-
-#define	C_CM_RESET	0x01		/* reset/flush buffers */
-#define	C_CM_IOCTL	0x02		/* re-read CH_CTRL */
-#define	C_CM_IOCTLW	0x03		/* re-read CH_CTRL, intr when done */
-#define	C_CM_IOCTLM	0x04		/* RS-232 outputs change */
-#define	C_CM_SENDXOFF	0x10		/* send Xoff */
-#define	C_CM_SENDXON	0x11		/* send Xon */
-#define C_CM_CLFLOW	0x12		/* Clear flow control (resume) */
-#define	C_CM_SENDBRK	0x41		/* send break */
-#define	C_CM_INTBACK	0x42		/* Interrupt back */
-#define	C_CM_SET_BREAK	0x43		/* Tx break on */
-#define	C_CM_CLR_BREAK	0x44		/* Tx break off */
-#define	C_CM_CMD_DONE	0x45		/* Previous command done */
-#define C_CM_INTBACK2	0x46		/* Alternate Interrupt back */
-#define	C_CM_TINACT	0x51		/* set inactivity detection */
-#define	C_CM_IRQ_ENBL	0x52		/* enable generation of interrupts */
-#define	C_CM_IRQ_DSBL	0x53		/* disable generation of interrupts */
-#define	C_CM_ACK_ENBL	0x54		/* enable acknowledged interrupt mode */
-#define	C_CM_ACK_DSBL	0x55		/* disable acknowledged intr mode */
-#define	C_CM_FLUSH_RX	0x56		/* flushes Rx buffer */
-#define	C_CM_FLUSH_TX	0x57		/* flushes Tx buffer */
-#define C_CM_Q_ENABLE	0x58		/* enables queue access from the 
-					   driver */
-#define C_CM_Q_DISABLE  0x59            /* disables queue access from the 
-					   driver */
-
-#define	C_CM_TXBEMPTY	0x60		/* Tx buffer is empty */
-#define	C_CM_TXLOWWM	0x61		/* Tx buffer low water mark */
-#define	C_CM_RXHIWM	0x62		/* Rx buffer high water mark */
-#define	C_CM_RXNNDT	0x63		/* rx no new data timeout */
-#define	C_CM_TXFEMPTY	0x64
-#define	C_CM_ICHAR	0x65
-#define	C_CM_MDCD	0x70		/* modem DCD change */
-#define	C_CM_MDSR	0x71		/* modem DSR change */
-#define	C_CM_MRI	0x72		/* modem RI change */
-#define	C_CM_MCTS	0x73		/* modem CTS change */
-#define C_CM_MRTS	0x74		/* modem RTS drop */
-#define	C_CM_RXBRK	0x84		/* Break received */
-#define	C_CM_PR_ERROR	0x85		/* Parity error */
-#define	C_CM_FR_ERROR	0x86		/* Frame error */
-#define C_CM_OVR_ERROR  0x87            /* Overrun error */
-#define C_CM_RXOFL	0x88            /* RX buffer overflow */
-#define	C_CM_CMDERROR	0x90		/* command error */
-#define	C_CM_FATAL	0x91		/* fatal error */
-#define	C_CM_HW_RESET	0x92		/* reset board */
-
-/*
- *	CH_CTRL - This per port structure contains all parameters
- *	that control an specific port. It can be seen as the
- *	configuration registers of a "super-serial-controller".
- */
-
-struct CH_CTRL {
-	__u32	op_mode;	/* operation mode */
-	__u32	intr_enable;	/* interrupt masking */
-	__u32	sw_flow;	/* SW flow control */
-	__u32	flow_status;	/* output flow status */
-	__u32	comm_baud;	/* baud rate  - numerically specified */
-	__u32	comm_parity;	/* parity */
-	__u32	comm_data_l;	/* data length/stop */
-	__u32	comm_flags;	/* other flags */
-	__u32	hw_flow;	/* HW flow control */
-	__u32	rs_control;	/* RS-232 outputs */
-	__u32	rs_status;	/* RS-232 inputs */
-	__u32	flow_xon;	/* xon char */
-	__u32	flow_xoff;	/* xoff char */
-	__u32	hw_overflow;	/* hw overflow counter */
-	__u32	sw_overflow;	/* sw overflow counter */
-	__u32	comm_error;	/* frame/parity error counter */
-	__u32 ichar;
-	__u32 filler[7];
-};
-
-
-/*
- *	BUF_CTRL - This per channel structure contains
- *	all Tx and Rx buffer control for a given channel.
- */
-
-struct	BUF_CTRL	{
-	__u32	flag_dma;	/* buffers are in Host memory */
-	__u32	tx_bufaddr;	/* address of the tx buffer */
-	__u32	tx_bufsize;	/* tx buffer size */
-	__u32	tx_threshold;	/* tx low water mark */
-	__u32	tx_get;		/* tail index tx buf */
-	__u32	tx_put;		/* head index tx buf */
-	__u32	rx_bufaddr;	/* address of the rx buffer */
-	__u32	rx_bufsize;	/* rx buffer size */
-	__u32	rx_threshold;	/* rx high water mark */
-	__u32	rx_get;		/* tail index rx buf */
-	__u32	rx_put;		/* head index rx buf */
-	__u32	filler[5];	/* filler to align structures */
-};
-
-/*
- *	BOARD_CTRL - This per board structure contains all global 
- *	control fields related to the board.
- */
-
-struct BOARD_CTRL {
-
-	/* static info provided by the on-board CPU */
-	__u32	n_channel;	/* number of channels */
-	__u32	fw_version;	/* firmware version */
-
-	/* static info provided by the driver */
-	__u32	op_system;	/* op_system id */
-	__u32	dr_version;	/* driver version */
-
-	/* board control area */
-	__u32	inactivity;	/* inactivity control */
-
-	/* host to FW commands */
-	__u32	hcmd_channel;	/* channel number */
-	__u32	hcmd_param;	/* pointer to parameters */
-
-	/* FW to Host commands */
-	__u32	fwcmd_channel;	/* channel number */
-	__u32	fwcmd_param;	/* pointer to parameters */
-	__u32	zf_int_queue_addr; /* offset for INT_QUEUE structure */
-
-	/* filler so the structures are aligned */
-	__u32	filler[6];
-};
-
-/* Host Interrupt Queue */
-
-#define QUEUE_SIZE	(10*MAX_CHAN)
-
-struct	INT_QUEUE {
-	unsigned char	intr_code[QUEUE_SIZE];
-	unsigned long	channel[QUEUE_SIZE];
-	unsigned long	param[QUEUE_SIZE];
-	unsigned long	put;
-	unsigned long	get;
-};
-
-/*
- *	ZFW_CTRL - This is the data structure that includes all other
- *	data structures used by the Firmware.
- */
- 
-struct ZFW_CTRL {
-	struct BOARD_CTRL	board_ctrl;
-	struct CH_CTRL		ch_ctrl[MAX_CHAN];
-	struct BUF_CTRL		buf_ctrl[MAX_CHAN];
-};
-
-/****************** ****************** *******************/
-#endif
-
-#ifdef __KERNEL__
-
-/* Per card data structure */
-struct cyclades_card {
-	void __iomem *base_addr;
-	union {
-		void __iomem *p9050;
-		struct RUNTIME_9060 __iomem *p9060;
-	} ctl_addr;
-	struct BOARD_CTRL __iomem *board_ctrl;	/* cyz specific */
-	int irq;
-	unsigned int num_chips;	/* 0 if card absent, -1 if Z/PCI, else Y */
-	unsigned int first_line;	/* minor number of first channel on card */
-	unsigned int nports;	/* Number of ports in the card */
-	int bus_index;		/* address shift - 0 for ISA, 1 for PCI */
-	int intr_enabled;		/* FW Interrupt flag - 0 disabled, 1 enabled */
-	u32 hw_ver;
-	spinlock_t card_lock;
-	struct cyclades_port *ports;
-};
-
-/***************************************
- * Memory access functions/macros      *
- * (required to support Alpha systems) *
- ***************************************/
-
-#define cy_writeb(port,val)     do { writeb((val), (port)); mb(); } while (0)
-#define cy_writew(port,val)     do { writew((val), (port)); mb(); } while (0)
-#define cy_writel(port,val)     do { writel((val), (port)); mb(); } while (0)
-
-/*
- * Statistics counters
- */
-struct cyclades_icount {
-	__u32	cts, dsr, rng, dcd, tx, rx;
-	__u32	frame, parity, overrun, brk;
-	__u32	buf_overrun;
-};
-
-/*
- * This is our internal structure for each serial port's state.
- * 
- * Many fields are paralleled by the structure used by the serial_struct
- * structure.
- *
- * For definitions of the flags field, see tty.h
- */
-
-struct cyclades_port {
-	int                     magic;
-	struct tty_port		port;
-	struct cyclades_card	*card;
-	union {
-		struct {
-			void __iomem *base_addr;
-		} cyy;
-		struct {
-			struct CH_CTRL __iomem	*ch_ctrl;
-			struct BUF_CTRL __iomem	*buf_ctrl;
-		} cyz;
-	} u;
-	int			line;
-	int			flags; 		/* defined in tty.h */
-	int                     type;		/* UART type */
-	int			read_status_mask;
-	int			ignore_status_mask;
-	int			timeout;
-	int			xmit_fifo_size;
-	int                     cor1,cor2,cor3,cor4,cor5;
-	int                     tbpr,tco,rbpr,rco;
-	int			baud;
-	int			rflow;
-	int			rtsdtr_inv;
-	int			chip_rev;
-	int			custom_divisor;
-	u8			x_char; /* to be pushed out ASAP */
-	int                     breakon;
-	int                     breakoff;
-	int			xmit_head;
-	int			xmit_tail;
-	int			xmit_cnt;
-        int                     default_threshold;
-        int                     default_timeout;
-	unsigned long		rflush_count;
-	struct cyclades_monitor	mon;
-	struct cyclades_idle_stats	idle_stats;
-	struct cyclades_icount	icount;
-	struct completion       shutdown_wait;
-	int throttle;
-};
-
-#define	CLOSING_WAIT_DELAY	30*HZ
-#define CY_CLOSING_WAIT_NONE	ASYNC_CLOSING_WAIT_NONE
-#define CY_CLOSING_WAIT_INF	ASYNC_CLOSING_WAIT_INF
-
-
-#define CyMAX_CHIPS_PER_CARD	8
-#define CyMAX_CHAR_FIFO		12
-#define CyPORTS_PER_CHIP	4
-#define	CD1400_MAX_SPEED	115200
-
-#define	CyISA_Ywin	0x2000
-
-#define CyPCI_Ywin 	0x4000
-#define CyPCI_Yctl 	0x80
-#define CyPCI_Zctl 	CTRL_WINDOW_SIZE
-#define CyPCI_Zwin 	0x80000
-#define CyPCI_Ze_win 	(2 * CyPCI_Zwin)
-
-#define PCI_DEVICE_ID_MASK	0x06
-
-/**** CD1400 registers ****/
-
-#define CD1400_REV_G	0x46
-#define CD1400_REV_J	0x48
-
-#define CyRegSize  	0x0400
-#define Cy_HwReset 	0x1400
-#define Cy_ClrIntr 	0x1800
-#define Cy_EpldRev 	0x1e00
-
-/* Global Registers */
-
-#define CyGFRCR		(0x40*2)
-#define      CyRevE		(44)
-#define CyCAR		(0x68*2)
-#define      CyCHAN_0		(0x00)
-#define      CyCHAN_1		(0x01)
-#define      CyCHAN_2		(0x02)
-#define      CyCHAN_3		(0x03)
-#define CyGCR		(0x4B*2)
-#define      CyCH0_SERIAL	(0x00)
-#define      CyCH0_PARALLEL	(0x80)
-#define CySVRR		(0x67*2)
-#define      CySRModem		(0x04)
-#define      CySRTransmit	(0x02)
-#define      CySRReceive	(0x01)
-#define CyRICR		(0x44*2)
-#define CyTICR		(0x45*2)
-#define CyMICR		(0x46*2)
-#define      CyICR0		(0x00)
-#define      CyICR1		(0x01)
-#define      CyICR2		(0x02)
-#define      CyICR3		(0x03)
-#define CyRIR		(0x6B*2)
-#define CyTIR		(0x6A*2)
-#define CyMIR		(0x69*2)
-#define      CyIRDirEq		(0x80)
-#define      CyIRBusy		(0x40)
-#define      CyIRUnfair		(0x20)
-#define      CyIRContext	(0x1C)
-#define      CyIRChannel	(0x03)
-#define CyPPR 		(0x7E*2)
-#define      CyCLOCK_20_1MS	(0x27)
-#define      CyCLOCK_25_1MS	(0x31)
-#define      CyCLOCK_25_5MS	(0xf4)
-#define      CyCLOCK_60_1MS	(0x75)
-#define      CyCLOCK_60_2MS	(0xea)
-
-/* Virtual Registers */
-
-#define CyRIVR		(0x43*2)
-#define CyTIVR		(0x42*2)
-#define CyMIVR		(0x41*2)
-#define      CyIVRMask (0x07)
-#define      CyIVRRxEx (0x07)
-#define      CyIVRRxOK (0x03)
-#define      CyIVRTxOK (0x02)
-#define      CyIVRMdmOK (0x01)
-#define CyTDR		(0x63*2)
-#define CyRDSR		(0x62*2)
-#define      CyTIMEOUT		(0x80)
-#define      CySPECHAR		(0x70)
-#define      CyBREAK		(0x08)
-#define      CyPARITY		(0x04)
-#define      CyFRAME		(0x02)
-#define      CyOVERRUN		(0x01)
-#define CyMISR		(0x4C*2)
-/* see CyMCOR_ and CyMSVR_ for bits*/
-#define CyEOSRR		(0x60*2)
-
-/* Channel Registers */
-
-#define CyLIVR		(0x18*2)
-#define      CyMscsr		(0x01)
-#define      CyTdsr		(0x02)
-#define      CyRgdsr		(0x03)
-#define      CyRedsr		(0x07)
-#define CyCCR		(0x05*2)
-/* Format 1 */
-#define      CyCHAN_RESET	(0x80)
-#define      CyCHIP_RESET	(0x81)
-#define      CyFlushTransFIFO	(0x82)
-/* Format 2 */
-#define      CyCOR_CHANGE	(0x40)
-#define      CyCOR1ch		(0x02)
-#define      CyCOR2ch		(0x04)
-#define      CyCOR3ch		(0x08)
-/* Format 3 */
-#define      CySEND_SPEC_1	(0x21)
-#define      CySEND_SPEC_2	(0x22)
-#define      CySEND_SPEC_3	(0x23)
-#define      CySEND_SPEC_4	(0x24)
-/* Format 4 */
-#define      CyCHAN_CTL		(0x10)
-#define      CyDIS_RCVR		(0x01)
-#define      CyENB_RCVR		(0x02)
-#define      CyDIS_XMTR		(0x04)
-#define      CyENB_XMTR		(0x08)
-#define CySRER		(0x06*2)
-#define      CyMdmCh		(0x80)
-#define      CyRxData		(0x10)
-#define      CyTxRdy		(0x04)
-#define      CyTxMpty		(0x02)
-#define      CyNNDT		(0x01)
-#define CyCOR1		(0x08*2)
-#define      CyPARITY_NONE	(0x00)
-#define      CyPARITY_0		(0x20)
-#define      CyPARITY_1		(0xA0)
-#define      CyPARITY_E		(0x40)
-#define      CyPARITY_O		(0xC0)
-#define      Cy_1_STOP		(0x00)
-#define      Cy_1_5_STOP	(0x04)
-#define      Cy_2_STOP		(0x08)
-#define      Cy_5_BITS		(0x00)
-#define      Cy_6_BITS		(0x01)
-#define      Cy_7_BITS		(0x02)
-#define      Cy_8_BITS		(0x03)
-#define CyCOR2		(0x09*2)
-#define      CyIXM		(0x80)
-#define      CyTxIBE		(0x40)
-#define      CyETC		(0x20)
-#define      CyAUTO_TXFL	(0x60)
-#define      CyLLM		(0x10)
-#define      CyRLM		(0x08)
-#define      CyRtsAO		(0x04)
-#define      CyCtsAE		(0x02)
-#define      CyDsrAE		(0x01)
-#define CyCOR3		(0x0A*2)
-#define      CySPL_CH_DRANGE	(0x80)  /* special character detect range */
-#define      CySPL_CH_DET1	(0x40)  /* enable special character detection
-                                                               on SCHR4-SCHR3 */
-#define      CyFL_CTRL_TRNSP	(0x20)  /* Flow Control Transparency */
-#define      CySPL_CH_DET2	(0x10)  /* Enable special character detection
-                                                               on SCHR2-SCHR1 */
-#define      CyREC_FIFO		(0x0F)  /* Receive FIFO threshold */
-#define CyCOR4		(0x1E*2)
-#define CyCOR5		(0x1F*2)
-#define CyCCSR		(0x0B*2)
-#define      CyRxEN		(0x80)
-#define      CyRxFloff		(0x40)
-#define      CyRxFlon		(0x20)
-#define      CyTxEN		(0x08)
-#define      CyTxFloff		(0x04)
-#define      CyTxFlon		(0x02)
-#define CyRDCR		(0x0E*2)
-#define CySCHR1		(0x1A*2)
-#define CySCHR2 	(0x1B*2)
-#define CySCHR3		(0x1C*2)
-#define CySCHR4		(0x1D*2)
-#define CySCRL		(0x22*2)
-#define CySCRH		(0x23*2)
-#define CyLNC		(0x24*2)
-#define CyMCOR1 	(0x15*2)
-#define CyMCOR2		(0x16*2)
-#define CyRTPR		(0x21*2)
-#define CyMSVR1		(0x6C*2)
-#define CyMSVR2		(0x6D*2)
-#define      CyANY_DELTA	(0xF0)
-#define      CyDSR		(0x80)
-#define      CyCTS		(0x40)
-#define      CyRI		(0x20)
-#define      CyDCD		(0x10)
-#define      CyDTR              (0x02)
-#define      CyRTS              (0x01)
-#define CyPVSR		(0x6F*2)
-#define CyRBPR		(0x78*2)
-#define CyRCOR		(0x7C*2)
-#define CyTBPR		(0x72*2)
-#define CyTCOR		(0x76*2)
-
-/* Custom Registers */
-
-#define	CyPLX_VER	(0x3400)
-#define	PLX_9050	0x0b
-#define	PLX_9060	0x0c
-#define	PLX_9080	0x0d
-
-/***************************************************************************/
-
-#endif /* __KERNEL__ */
-#endif /* _LINUX_CYCLADES_H */
diff --git a/ANDROID_3.4.5/include/linux/cyclomx.h b/ANDROID_3.4.5/include/linux/cyclomx.h
deleted file mode 100644
index b88f7f42..00000000
--- a/ANDROID_3.4.5/include/linux/cyclomx.h
+++ /dev/null
@@ -1,77 +0,0 @@
-#ifndef	_CYCLOMX_H
-#define	_CYCLOMX_H
-/*
-* cyclomx.h	Cyclom 2X WAN Link Driver.
-*		User-level API definitions.
-*
-* Author:	Arnaldo Carvalho de Melo <acme@conectiva.com.br>
-*
-* Copyright:	(c) 1998-2003 Arnaldo Carvalho de Melo
-*
-* Based on wanpipe.h by Gene Kozin <genek@compuserve.com>
-*
-*		This program is free software; you can redistribute it and/or
-*		modify it under the terms of the GNU General Public License
-*		as published by the Free Software Foundation; either version
-*		2 of the License, or (at your option) any later version.
-* ============================================================================
-* 2000/07/13    acme		remove crap #if KERNEL_VERSION > blah
-* 2000/01/21    acme            rename cyclomx_open to cyclomx_mod_inc_use_count
-*                               and cyclomx_close to cyclomx_mod_dec_use_count
-* 1999/05/19	acme		wait_queue_head_t wait_stats(support for 2.3.*)
-* 1999/01/03	acme		judicious use of data types
-* 1998/12/27	acme		cleanup: PACKED not needed
-* 1998/08/08	acme		Version 0.0.1
-*/
-
-#include <linux/wanrouter.h>
-#include <linux/spinlock.h>
-
-#ifdef	__KERNEL__
-/* Kernel Interface */
-
-#include <linux/cycx_drv.h>	/* Cyclom 2X support module API definitions */
-#include <linux/cycx_cfm.h>	/* Cyclom 2X firmware module definitions */
-#ifdef CONFIG_CYCLOMX_X25
-#include <linux/cycx_x25.h>
-#endif
-
-/* Adapter Data Space.
- * This structure is needed because we handle multiple cards, otherwise
- * static data would do it.
- */
-struct cycx_device {
-	char devname[WAN_DRVNAME_SZ + 1];/* card name */
-	struct cycx_hw hw;		/* hardware configuration */
-	struct wan_device wandev;	/* WAN device data space */
-	u32 state_tick;			/* link state timestamp */
-	spinlock_t lock;
-	char in_isr;			/* interrupt-in-service flag */
-	char buff_int_mode_unbusy;      /* flag for carrying out dev_tint */
-	wait_queue_head_t wait_stats;  /* to wait for the STATS indication */
-	void __iomem *mbox;			/* -> mailbox */
-	void (*isr)(struct cycx_device* card);	/* interrupt service routine */
-	int (*exec)(struct cycx_device* card, void* u_cmd, void* u_data);
-	union {
-#ifdef CONFIG_CYCLOMX_X25
-		struct { /* X.25 specific data */
-			u32 lo_pvc;
-			u32 hi_pvc;
-			u32 lo_svc;
-			u32 hi_svc;
-			struct cycx_x25_stats stats;
-			spinlock_t lock;
-			u32 connection_keys;
-		} x;
-#endif
-	} u;
-};
-
-/* Public Functions */
-void cycx_set_state(struct cycx_device *card, int state);
-
-#ifdef CONFIG_CYCLOMX_X25
-int cycx_x25_wan_init(struct cycx_device *card, wandev_conf_t *conf);
-#endif
-#endif	/* __KERNEL__ */
-#endif	/* _CYCLOMX_H */
diff --git a/ANDROID_3.4.5/include/linux/cycx_cfm.h b/ANDROID_3.4.5/include/linux/cycx_cfm.h
deleted file mode 100644
index 032d26ed..00000000
--- a/ANDROID_3.4.5/include/linux/cycx_cfm.h
+++ /dev/null
@@ -1,101 +0,0 @@
-/*
-* cycx_cfm.h	Cyclom 2X WAN Link Driver.
-*		Definitions for the Cyclom 2X Firmware Module (CFM).
-*
-* Author:	Arnaldo Carvalho de Melo <acme@conectiva.com.br>
-*
-* Copyright:	(c) 1998-2003 Arnaldo Carvalho de Melo
-*
-* Based on sdlasfm.h by Gene Kozin <74604.152@compuserve.com>
-*
-*		This program is free software; you can redistribute it and/or
-*		modify it under the terms of the GNU General Public License
-*		as published by the Free Software Foundation; either version
-*		2 of the License, or (at your option) any later version.
-* ============================================================================
-* 1998/08/08	acme		Initial version.
-*/
-#ifndef	_CYCX_CFM_H
-#define	_CYCX_CFM_H
-
-/* Defines */
-
-#define	CFM_VERSION	2
-#define	CFM_SIGNATURE	"CFM - Cyclades CYCX Firmware Module"
-
-/* min/max */
-#define	CFM_IMAGE_SIZE	0x20000	/* max size of CYCX code image file */
-#define	CFM_DESCR_LEN	256	/* max length of description string */
-#define	CFM_MAX_CYCX	1	/* max number of compatible adapters */
-#define	CFM_LOAD_BUFSZ	0x400	/* buffer size for reset code (buffer_load) */
-
-/* Firmware Commands */
-#define GEN_POWER_ON	0x1280
-
-#define GEN_SET_SEG	0x1401	/* boot segment setting. */
-#define GEN_BOOT_DAT	0x1402	/* boot data. */
-#define GEN_START	0x1403	/* board start. */
-#define GEN_DEFPAR	0x1404	/* buffer length for boot. */
-
-/* Adapter Types */
-#define CYCX_2X		2
-/* for now only the 2X is supported, no plans to support 8X or 16X */
-#define CYCX_8X		8
-#define CYCX_16X	16
-
-#define	CFID_X25_2X	5200
-
-/**
- *	struct cycx_fw_info - firmware module information.
- *	@codeid - firmware ID
- *	@version - firmware version number
- *	@adapter - compatible adapter types
- *	@memsize - minimum memory size
- *	@reserved - reserved
- *	@startoffs - entry point offset
- *	@winoffs - dual-port memory window offset
- *	@codeoffs - code load offset
- *	@codesize - code size
- *	@dataoffs - configuration data load offset
- *	@datasize - configuration data size
- */
-struct cycx_fw_info {
-	unsigned short	codeid;
-	unsigned short	version;
-	unsigned short	adapter[CFM_MAX_CYCX];
-	unsigned long	memsize;
-	unsigned short	reserved[2];
-	unsigned short	startoffs;
-	unsigned short	winoffs;
-	unsigned short	codeoffs;
-	unsigned long	codesize;
-	unsigned short	dataoffs;
-	unsigned long	datasize;
-};
-
-/**
- *	struct cycx_firmware - CYCX firmware file structure
- *	@signature - CFM file signature
- *	@version - file format version
- *	@checksum - info + image
- *	@reserved - reserved
- *	@descr - description string
- *	@info - firmware module info
- *	@image - code image (variable size)
- */
-struct cycx_firmware {
-	char		    signature[80];
-	unsigned short	    version;
-	unsigned short	    checksum;
-	unsigned short	    reserved[6];
-	char		    descr[CFM_DESCR_LEN];
-	struct cycx_fw_info info;
-	unsigned char	    image[0];
-};
-
-struct cycx_fw_header {
-	unsigned long  reset_size;
-	unsigned long  data_size;
-	unsigned long  code_size;
-};
-#endif	/* _CYCX_CFM_H */
diff --git a/ANDROID_3.4.5/include/linux/cycx_drv.h b/ANDROID_3.4.5/include/linux/cycx_drv.h
deleted file mode 100644
index 12fe6b0b..00000000
--- a/ANDROID_3.4.5/include/linux/cycx_drv.h
+++ /dev/null
@@ -1,64 +0,0 @@
-/*
-* cycx_drv.h	CYCX Support Module.  Kernel API Definitions.
-*
-* Author:	Arnaldo Carvalho de Melo <acme@conectiva.com.br>
-*
-* Copyright:	(c) 1998-2003 Arnaldo Carvalho de Melo
-*
-* Based on sdladrv.h by Gene Kozin <genek@compuserve.com>
-*
-*		This program is free software; you can redistribute it and/or
-*		modify it under the terms of the GNU General Public License
-*		as published by the Free Software Foundation; either version
-*		2 of the License, or (at your option) any later version.
-* ============================================================================
-* 1999/10/23	acme		cycxhw_t cleanup
-* 1999/01/03	acme		more judicious use of data types...
-*				uclong, ucchar, etc deleted, the u8, u16, u32
-*				types are the portable way to go.
-* 1999/01/03	acme		judicious use of data types... u16, u32, etc
-* 1998/12/26	acme	 	FIXED_BUFFERS, CONF_OFFSET,
-*                               removal of cy_read{bwl}
-* 1998/08/08	acme	 	Initial version.
-*/
-#ifndef	_CYCX_DRV_H
-#define	_CYCX_DRV_H
-
-#define	CYCX_WINDOWSIZE	0x4000	/* default dual-port memory window size */
-#define	GEN_CYCX_INTR	0x02
-#define	RST_ENABLE	0x04
-#define	START_CPU	0x06
-#define	RST_DISABLE	0x08
-#define	FIXED_BUFFERS	0x08
-#define	TEST_PATTERN	0xaa55
-#define	CMD_OFFSET	0x20
-#define CONF_OFFSET     0x0380
-#define	RESET_OFFSET	0x3c00	/* For reset file load */
-#define	DATA_OFFSET	0x0100	/* For code and data files load */
-#define	START_OFFSET	0x3ff0	/* 80186 starts here */
-
-/**
- *	struct cycx_hw - Adapter hardware configuration
- *	@fwid - firmware ID
- *	@irq - interrupt request level
- *	@dpmbase - dual-port memory base
- *	@dpmsize - dual-port memory size
- *	@reserved - reserved for future use
- */
-struct cycx_hw {
-	u32 fwid;
-	int irq;
-	void __iomem *dpmbase;
-	u32 dpmsize;
-	u32 reserved[5];
-};
-
-/* Function Prototypes */
-extern int cycx_setup(struct cycx_hw *hw, void *sfm, u32 len, unsigned long base);
-extern int cycx_down(struct cycx_hw *hw);
-extern int cycx_peek(struct cycx_hw *hw, u32 addr, void *buf, u32 len);
-extern int cycx_poke(struct cycx_hw *hw, u32 addr, void *buf, u32 len);
-extern int cycx_exec(void __iomem *addr);
-
-extern void cycx_intr(struct cycx_hw *hw);
-#endif	/* _CYCX_DRV_H */
diff --git a/ANDROID_3.4.5/include/linux/cycx_x25.h b/ANDROID_3.4.5/include/linux/cycx_x25.h
deleted file mode 100644
index 362bf19d..00000000
--- a/ANDROID_3.4.5/include/linux/cycx_x25.h
+++ /dev/null
@@ -1,125 +0,0 @@
-#ifndef	_CYCX_X25_H
-#define	_CYCX_X25_H
-/*
-* cycx_x25.h	Cyclom X.25 firmware API definitions.
-*
-* Author:	Arnaldo Carvalho de Melo <acme@conectiva.com.br>
-*
-* Copyright:	(c) 1998-2003 Arnaldo Carvalho de Melo
-*
-* Based on sdla_x25.h by Gene Kozin <74604.152@compuserve.com>
-*
-*		This program is free software; you can redistribute it and/or
-*		modify it under the terms of the GNU General Public License
-*		as published by the Free Software Foundation; either version
-*		2 of the License, or (at your option) any later version.
-* ============================================================================
-* 2000/04/02	acme		dprintk and cycx_debug
-* 1999/01/03	acme		judicious use of data types
-* 1999/01/02	acme		#define X25_ACK_N3	0x4411
-* 1998/12/28	acme		cleanup: lot'o'things removed
-*					 commands listed,
-*					 TX25Cmd & TX25Config structs
-*					 typedef'ed
-*/
-#ifndef PACKED
-#define PACKED __attribute__((packed))
-#endif 
-
-/* X.25 shared memory layout. */
-#define	X25_MBOX_OFFS	0x300	/* general mailbox block */
-#define	X25_RXMBOX_OFFS	0x340	/* receive mailbox */
-
-/* Debug */
-#define dprintk(level, format, a...) if (cycx_debug >= level) printk(format, ##a)
-
-extern unsigned int cycx_debug;
-
-/* Data Structures */
-/* X.25 Command Block. */
-struct cycx_x25_cmd {
-	u16 command;
-	u16 link;	/* values: 0 or 1 */
-	u16 len;	/* values: 0 thru 0x205 (517) */
-	u32 buf;
-} PACKED;
-
-/* Defines for the 'command' field. */
-#define X25_CONNECT_REQUEST             0x4401
-#define X25_CONNECT_RESPONSE            0x4402
-#define X25_DISCONNECT_REQUEST          0x4403
-#define X25_DISCONNECT_RESPONSE         0x4404
-#define X25_DATA_REQUEST                0x4405
-#define X25_ACK_TO_VC			0x4406
-#define X25_INTERRUPT_RESPONSE          0x4407
-#define X25_CONFIG                      0x4408
-#define X25_CONNECT_INDICATION          0x4409
-#define X25_CONNECT_CONFIRM             0x440A
-#define X25_DISCONNECT_INDICATION       0x440B
-#define X25_DISCONNECT_CONFIRM          0x440C
-#define X25_DATA_INDICATION             0x440E
-#define X25_INTERRUPT_INDICATION        0x440F
-#define X25_ACK_FROM_VC			0x4410
-#define X25_ACK_N3			0x4411
-#define X25_CONNECT_COLLISION           0x4413
-#define X25_N3WIN                       0x4414
-#define X25_LINE_ON                     0x4415
-#define X25_LINE_OFF                    0x4416
-#define X25_RESET_REQUEST               0x4417
-#define X25_LOG                         0x4500
-#define X25_STATISTIC                   0x4600
-#define X25_TRACE                       0x4700
-#define X25_N2TRACEXC                   0x4702
-#define X25_N3TRACEXC                   0x4703
-
-/**
- *	struct cycx_x25_config - cyclom2x x25 firmware configuration
- *	@link - link number
- *	@speed - line speed
- *	@clock - internal/external
- *	@n2 - # of level 2 retransm.(values: 1 thru FF)
- *	@n2win - level 2 window (values: 1 thru 7)
- *	@n3win - level 3 window (values: 1 thru 7)
- *	@nvc - # of logical channels (values: 1 thru 64)
- *	@pktlen - level 3 packet length - log base 2 of size
- *	@locaddr - my address
- *	@remaddr - remote address
- *	@t1 - time, in seconds
- *	@t2 - time, in seconds
- *	@t21 - time, in seconds
- *	@npvc - # of permanent virt. circuits (1 thru nvc)
- *	@t23 - time, in seconds
- *	@flags - see dosx25.doc, in portuguese, for details
- */
-struct cycx_x25_config {
-	u8  link;
-	u8  speed;
-	u8  clock;
-	u8  n2;
-	u8  n2win;
-	u8  n3win;
-	u8  nvc;
-	u8  pktlen;
-	u8  locaddr;
-	u8  remaddr;
-	u16 t1;
-	u16 t2;
-	u8  t21;
-	u8  npvc;
-	u8  t23;
-	u8  flags;
-} PACKED;
-
-struct cycx_x25_stats {
-	u16 rx_crc_errors;
-	u16 rx_over_errors;
-	u16 n2_tx_frames;
-	u16 n2_rx_frames;
-	u16 tx_timeouts;
-	u16 rx_timeouts;
-	u16 n3_tx_packets;
-	u16 n3_rx_packets;
-	u16 tx_aborts;
-	u16 rx_aborts;
-} PACKED;
-#endif	/* _CYCX_X25_H */
diff --git a/ANDROID_3.4.5/include/linux/davinci_emac.h b/ANDROID_3.4.5/include/linux/davinci_emac.h
deleted file mode 100644
index 54288850..00000000
--- a/ANDROID_3.4.5/include/linux/davinci_emac.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * TI DaVinci EMAC platform support
- *
- * Author: Kevin Hilman, Deep Root Systems, LLC
- *
- * 2007 (c) Deep Root Systems, LLC. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#ifndef _LINUX_DAVINCI_EMAC_H
-#define _LINUX_DAVINCI_EMAC_H
-
-#include <linux/if_ether.h>
-#include <linux/memory.h>
-
-struct mdio_platform_data {
-	unsigned long		bus_freq;
-};
-
-struct emac_platform_data {
-	char mac_addr[ETH_ALEN];
-	u32 ctrl_reg_offset;
-	u32 ctrl_mod_reg_offset;
-	u32 ctrl_ram_offset;
-	u32 hw_ram_addr;
-	u32 ctrl_ram_size;
-
-	/*
-	 * phy_id can be one of the following:
-	 *   - NULL		: use the first phy on the bus,
-	 *   - ""		: force to 100/full, no mdio control
-	 *   - "<bus>:<addr>"	: use the specified bus and phy
-	 */
-	const char *phy_id;
-
-	u8 rmii_en;
-	u8 version;
-	bool no_bd_ram;
-	void (*interrupt_enable) (void);
-	void (*interrupt_disable) (void);
-};
-
-enum {
-	EMAC_VERSION_1,	/* DM644x */
-	EMAC_VERSION_2,	/* DM646x */
-};
-
-void davinci_get_mac_addr(struct memory_accessor *mem_acc, void *context);
-#endif
diff --git a/ANDROID_3.4.5/include/linux/dca.h b/ANDROID_3.4.5/include/linux/dca.h
deleted file mode 100644
index d27a7a05..00000000
--- a/ANDROID_3.4.5/include/linux/dca.h
+++ /dev/null
@@ -1,81 +0,0 @@
-/*
- * Copyright(c) 2007 - 2009 Intel Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the Free
- * Software Foundation; either version 2 of the License, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc., 59
- * Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- *
- * The full GNU General Public License is included in this distribution in the
- * file called COPYING.
- */
-#ifndef DCA_H
-#define DCA_H
-
-#include <linux/pci.h>
-
-/* DCA Provider API */
-
-/* DCA Notifier Interface */
-void dca_register_notify(struct notifier_block *nb);
-void dca_unregister_notify(struct notifier_block *nb);
-
-#define DCA_PROVIDER_ADD     0x0001
-#define DCA_PROVIDER_REMOVE  0x0002
-
-struct dca_provider {
-	struct list_head	node;
-	struct dca_ops		*ops;
-	struct device 		*cd;
-	int			 id;
-};
-
-struct dca_domain {
-	struct list_head	node;
-	struct list_head	dca_providers;
-	struct pci_bus		*pci_rc;
-};
-
-struct dca_ops {
-	int	(*add_requester)    (struct dca_provider *, struct device *);
-	int	(*remove_requester) (struct dca_provider *, struct device *);
-	u8	(*get_tag)	    (struct dca_provider *, struct device *,
-				     int cpu);
-	int	(*dev_managed)      (struct dca_provider *, struct device *);
-};
-
-struct dca_provider *alloc_dca_provider(struct dca_ops *ops, int priv_size);
-void free_dca_provider(struct dca_provider *dca);
-int register_dca_provider(struct dca_provider *dca, struct device *dev);
-void unregister_dca_provider(struct dca_provider *dca, struct device *dev);
-
-static inline void *dca_priv(struct dca_provider *dca)
-{
-	return (void *)dca + sizeof(struct dca_provider);
-}
-
-/* Requester API */
-#define DCA_GET_TAG_TWO_ARGS
-int dca_add_requester(struct device *dev);
-int dca_remove_requester(struct device *dev);
-u8 dca_get_tag(int cpu);
-u8 dca3_get_tag(struct device *dev, int cpu);
-
-/* internal stuff */
-int __init dca_sysfs_init(void);
-void __exit dca_sysfs_exit(void);
-int dca_sysfs_add_provider(struct dca_provider *dca, struct device *dev);
-void dca_sysfs_remove_provider(struct dca_provider *dca);
-int dca_sysfs_add_req(struct dca_provider *dca, struct device *dev, int slot);
-void dca_sysfs_remove_req(struct dca_provider *dca, int slot);
-
-#endif /* DCA_H */
diff --git a/ANDROID_3.4.5/include/linux/dcache.h b/ANDROID_3.4.5/include/linux/dcache.h
deleted file mode 100644
index 7e11f141..00000000
--- a/ANDROID_3.4.5/include/linux/dcache.h
+++ /dev/null
@@ -1,403 +0,0 @@
-#ifndef __LINUX_DCACHE_H
-#define __LINUX_DCACHE_H
-
-#include <linux/atomic.h>
-#include <linux/list.h>
-#include <linux/rculist.h>
-#include <linux/rculist_bl.h>
-#include <linux/spinlock.h>
-#include <linux/seqlock.h>
-#include <linux/cache.h>
-#include <linux/rcupdate.h>
-
-struct nameidata;
-struct path;
-struct vfsmount;
-
-/*
- * linux/include/linux/dcache.h
- *
- * Dirent cache data structures
- *
- * (C) Copyright 1997 Thomas Schoebel-Theuer,
- * with heavy changes by Linus Torvalds
- */
-
-#define IS_ROOT(x) ((x) == (x)->d_parent)
-
-/*
- * "quick string" -- eases parameter passing, but more importantly
- * saves "metadata" about the string (ie length and the hash).
- *
- * hash comes first so it snuggles against d_parent in the
- * dentry.
- */
-struct qstr {
-	unsigned int hash;
-	unsigned int len;
-	const unsigned char *name;
-};
-
-struct dentry_stat_t {
-	int nr_dentry;
-	int nr_unused;
-	int age_limit;          /* age in seconds */
-	int want_pages;         /* pages requested by system */
-	int dummy[2];
-};
-extern struct dentry_stat_t dentry_stat;
-
-/* Name hashing routines. Initial hash value */
-/* Hash courtesy of the R5 hash in reiserfs modulo sign bits */
-#define init_name_hash()		0
-
-/* partial hash update function. Assume roughly 4 bits per character */
-static inline unsigned long
-partial_name_hash(unsigned long c, unsigned long prevhash)
-{
-	return (prevhash + (c << 4) + (c >> 4)) * 11;
-}
-
-/*
- * Finally: cut down the number of bits to a int value (and try to avoid
- * losing bits)
- */
-static inline unsigned long end_name_hash(unsigned long hash)
-{
-	return (unsigned int) hash;
-}
-
-/* Compute the hash for a name string. */
-extern unsigned int full_name_hash(const unsigned char *, unsigned int);
-
-/*
- * Try to keep struct dentry aligned on 64 byte cachelines (this will
- * give reasonable cacheline footprint with larger lines without the
- * large memory footprint increase).
- */
-#ifdef CONFIG_64BIT
-# define DNAME_INLINE_LEN 32 /* 192 bytes */
-#else
-# ifdef CONFIG_SMP
-#  define DNAME_INLINE_LEN 36 /* 128 bytes */
-# else
-#  define DNAME_INLINE_LEN 40 /* 128 bytes */
-# endif
-#endif
-
-struct dentry {
-	/* RCU lookup touched fields */
-	unsigned int d_flags;		/* protected by d_lock */
-	seqcount_t d_seq;		/* per dentry seqlock */
-	struct hlist_bl_node d_hash;	/* lookup hash list */
-	struct dentry *d_parent;	/* parent directory */
-	struct qstr d_name;
-	struct inode *d_inode;		/* Where the name belongs to - NULL is
-					 * negative */
-	unsigned char d_iname[DNAME_INLINE_LEN];	/* small names */
-
-	/* Ref lookup also touches following */
-	unsigned int d_count;		/* protected by d_lock */
-	spinlock_t d_lock;		/* per dentry lock */
-	const struct dentry_operations *d_op;
-	struct super_block *d_sb;	/* The root of the dentry tree */
-	unsigned long d_time;		/* used by d_revalidate */
-	void *d_fsdata;			/* fs-specific data */
-
-	struct list_head d_lru;		/* LRU list */
-	/*
-	 * d_child and d_rcu can share memory
-	 */
-	union {
-		struct list_head d_child;	/* child of parent list */
-	 	struct rcu_head d_rcu;
-	} d_u;
-	struct list_head d_subdirs;	/* our children */
-	struct list_head d_alias;	/* inode alias list */
-};
-
-/*
- * dentry->d_lock spinlock nesting subclasses:
- *
- * 0: normal
- * 1: nested
- */
-enum dentry_d_lock_class
-{
-	DENTRY_D_LOCK_NORMAL, /* implicitly used by plain spin_lock() APIs. */
-	DENTRY_D_LOCK_NESTED
-};
-
-struct dentry_operations {
-	int (*d_revalidate)(struct dentry *, struct nameidata *);
-	int (*d_hash)(const struct dentry *, const struct inode *,
-			struct qstr *);
-	int (*d_compare)(const struct dentry *, const struct inode *,
-			const struct dentry *, const struct inode *,
-			unsigned int, const char *, const struct qstr *);
-	int (*d_delete)(const struct dentry *);
-	void (*d_release)(struct dentry *);
-	void (*d_prune)(struct dentry *);
-	void (*d_iput)(struct dentry *, struct inode *);
-	char *(*d_dname)(struct dentry *, char *, int);
-	struct vfsmount *(*d_automount)(struct path *);
-	int (*d_manage)(struct dentry *, bool);
-} ____cacheline_aligned;
-
-/*
- * Locking rules for dentry_operations callbacks are to be found in
- * Documentation/filesystems/Locking. Keep it updated!
- *
- * FUrther descriptions are found in Documentation/filesystems/vfs.txt.
- * Keep it updated too!
- */
-
-/* d_flags entries */
-#define DCACHE_OP_HASH		0x0001
-#define DCACHE_OP_COMPARE	0x0002
-#define DCACHE_OP_REVALIDATE	0x0004
-#define DCACHE_OP_DELETE	0x0008
-#define DCACHE_OP_PRUNE         0x0010
-
-#define	DCACHE_DISCONNECTED	0x0020
-     /* This dentry is possibly not currently connected to the dcache tree, in
-      * which case its parent will either be itself, or will have this flag as
-      * well.  nfsd will not use a dentry with this bit set, but will first
-      * endeavour to clear the bit either by discovering that it is connected,
-      * or by performing lookup operations.   Any filesystem which supports
-      * nfsd_operations MUST have a lookup function which, if it finds a
-      * directory inode with a DCACHE_DISCONNECTED dentry, will d_move that
-      * dentry into place and return that dentry rather than the passed one,
-      * typically using d_splice_alias. */
-
-#define DCACHE_REFERENCED	0x0040  /* Recently used, don't discard. */
-#define DCACHE_RCUACCESS	0x0080	/* Entry has ever been RCU-visible */
-
-#define DCACHE_CANT_MOUNT	0x0100
-#define DCACHE_GENOCIDE		0x0200
-#define DCACHE_SHRINK_LIST	0x0400
-
-#define DCACHE_NFSFS_RENAMED	0x1000
-     /* this dentry has been "silly renamed" and has to be deleted on the last
-      * dput() */
-#define DCACHE_COOKIE		0x2000	/* For use by dcookie subsystem */
-#define DCACHE_FSNOTIFY_PARENT_WATCHED 0x4000
-     /* Parent inode is watched by some fsnotify listener */
-
-#define DCACHE_MOUNTED		0x10000	/* is a mountpoint */
-#define DCACHE_NEED_AUTOMOUNT	0x20000	/* handle automount on this dir */
-#define DCACHE_MANAGE_TRANSIT	0x40000	/* manage transit from this dirent */
-#define DCACHE_NEED_LOOKUP	0x80000 /* dentry requires i_op->lookup */
-#define DCACHE_MANAGED_DENTRY \
-	(DCACHE_MOUNTED|DCACHE_NEED_AUTOMOUNT|DCACHE_MANAGE_TRANSIT)
-
-extern seqlock_t rename_lock;
-
-static inline int dname_external(struct dentry *dentry)
-{
-	return dentry->d_name.name != dentry->d_iname;
-}
-
-/*
- * These are the low-level FS interfaces to the dcache..
- */
-extern void d_instantiate(struct dentry *, struct inode *);
-extern struct dentry * d_instantiate_unique(struct dentry *, struct inode *);
-extern struct dentry * d_materialise_unique(struct dentry *, struct inode *);
-extern void __d_drop(struct dentry *dentry);
-extern void d_drop(struct dentry *dentry);
-extern void d_delete(struct dentry *);
-extern void d_set_d_op(struct dentry *dentry, const struct dentry_operations *op);
-
-/* allocate/de-allocate */
-extern struct dentry * d_alloc(struct dentry *, const struct qstr *);
-extern struct dentry * d_alloc_pseudo(struct super_block *, const struct qstr *);
-extern struct dentry * d_splice_alias(struct inode *, struct dentry *);
-extern struct dentry * d_add_ci(struct dentry *, struct inode *, struct qstr *);
-extern struct dentry *d_find_any_alias(struct inode *inode);
-extern struct dentry * d_obtain_alias(struct inode *);
-extern void shrink_dcache_sb(struct super_block *);
-extern void shrink_dcache_parent(struct dentry *);
-extern void shrink_dcache_for_umount(struct super_block *);
-extern int d_invalidate(struct dentry *);
-
-/* only used at mount-time */
-extern struct dentry * d_make_root(struct inode *);
-
-/* <clickety>-<click> the ramfs-type tree */
-extern void d_genocide(struct dentry *);
-
-extern struct dentry *d_find_alias(struct inode *);
-extern void d_prune_aliases(struct inode *);
-
-/* test whether we have any submounts in a subdir tree */
-extern int have_submounts(struct dentry *);
-
-/*
- * This adds the entry to the hash queues.
- */
-extern void d_rehash(struct dentry *);
-
-/**
- * d_add - add dentry to hash queues
- * @entry: dentry to add
- * @inode: The inode to attach to this dentry
- *
- * This adds the entry to the hash queues and initializes @inode.
- * The entry was actually filled in earlier during d_alloc().
- */
- 
-static inline void d_add(struct dentry *entry, struct inode *inode)
-{
-	d_instantiate(entry, inode);
-	d_rehash(entry);
-}
-
-/**
- * d_add_unique - add dentry to hash queues without aliasing
- * @entry: dentry to add
- * @inode: The inode to attach to this dentry
- *
- * This adds the entry to the hash queues and initializes @inode.
- * The entry was actually filled in earlier during d_alloc().
- */
-static inline struct dentry *d_add_unique(struct dentry *entry, struct inode *inode)
-{
-	struct dentry *res;
-
-	res = d_instantiate_unique(entry, inode);
-	d_rehash(res != NULL ? res : entry);
-	return res;
-}
-
-extern void dentry_update_name_case(struct dentry *, struct qstr *);
-
-/* used for rename() and baskets */
-extern void d_move(struct dentry *, struct dentry *);
-extern struct dentry *d_ancestor(struct dentry *, struct dentry *);
-
-/* appendix may either be NULL or be used for transname suffixes */
-extern struct dentry *d_lookup(struct dentry *, struct qstr *);
-extern struct dentry *d_hash_and_lookup(struct dentry *, struct qstr *);
-extern struct dentry *__d_lookup(struct dentry *, struct qstr *);
-extern struct dentry *__d_lookup_rcu(const struct dentry *parent,
-				const struct qstr *name,
-				unsigned *seq, struct inode **inode);
-
-/**
- * __d_rcu_to_refcount - take a refcount on dentry if sequence check is ok
- * @dentry: dentry to take a ref on
- * @seq: seqcount to verify against
- * Returns: 0 on failure, else 1.
- *
- * __d_rcu_to_refcount operates on a dentry,seq pair that was returned
- * by __d_lookup_rcu, to get a reference on an rcu-walk dentry.
- */
-static inline int __d_rcu_to_refcount(struct dentry *dentry, unsigned seq)
-{
-	int ret = 0;
-
-	assert_spin_locked(&dentry->d_lock);
-	if (!read_seqcount_retry(&dentry->d_seq, seq)) {
-		ret = 1;
-		dentry->d_count++;
-	}
-
-	return ret;
-}
-
-/* validate "insecure" dentry pointer */
-extern int d_validate(struct dentry *, struct dentry *);
-
-/*
- * helper function for dentry_operations.d_dname() members
- */
-extern char *dynamic_dname(struct dentry *, char *, int, const char *, ...);
-
-extern char *__d_path(const struct path *, const struct path *, char *, int);
-extern char *d_absolute_path(const struct path *, char *, int);
-extern char *d_path(const struct path *, char *, int);
-extern char *d_path_with_unreachable(const struct path *, char *, int);
-extern char *dentry_path_raw(struct dentry *, char *, int);
-extern char *dentry_path(struct dentry *, char *, int);
-
-/* Allocation counts.. */
-
-/**
- *	dget, dget_dlock -	get a reference to a dentry
- *	@dentry: dentry to get a reference to
- *
- *	Given a dentry or %NULL pointer increment the reference count
- *	if appropriate and return the dentry. A dentry will not be 
- *	destroyed when it has references.
- */
-static inline struct dentry *dget_dlock(struct dentry *dentry)
-{
-	if (dentry)
-		dentry->d_count++;
-	return dentry;
-}
-
-static inline struct dentry *dget(struct dentry *dentry)
-{
-	if (dentry) {
-		spin_lock(&dentry->d_lock);
-		dget_dlock(dentry);
-		spin_unlock(&dentry->d_lock);
-	}
-	return dentry;
-}
-
-extern struct dentry *dget_parent(struct dentry *dentry);
-
-/**
- *	d_unhashed -	is dentry hashed
- *	@dentry: entry to check
- *
- *	Returns true if the dentry passed is not currently hashed.
- */
- 
-static inline int d_unhashed(struct dentry *dentry)
-{
-	return hlist_bl_unhashed(&dentry->d_hash);
-}
-
-static inline int d_unlinked(struct dentry *dentry)
-{
-	return d_unhashed(dentry) && !IS_ROOT(dentry);
-}
-
-static inline int cant_mount(struct dentry *dentry)
-{
-	return (dentry->d_flags & DCACHE_CANT_MOUNT);
-}
-
-static inline void dont_mount(struct dentry *dentry)
-{
-	spin_lock(&dentry->d_lock);
-	dentry->d_flags |= DCACHE_CANT_MOUNT;
-	spin_unlock(&dentry->d_lock);
-}
-
-extern void dput(struct dentry *);
-
-static inline bool d_managed(struct dentry *dentry)
-{
-	return dentry->d_flags & DCACHE_MANAGED_DENTRY;
-}
-
-static inline bool d_mountpoint(struct dentry *dentry)
-{
-	return dentry->d_flags & DCACHE_MOUNTED;
-}
-
-static inline bool d_need_lookup(struct dentry *dentry)
-{
-	return dentry->d_flags & DCACHE_NEED_LOOKUP;
-}
-
-extern void d_clear_need_lookup(struct dentry *dentry);
-
-extern int sysctl_vfs_cache_pressure;
-
-#endif	/* __LINUX_DCACHE_H */
diff --git a/ANDROID_3.4.5/include/linux/dcbnl.h b/ANDROID_3.4.5/include/linux/dcbnl.h
deleted file mode 100644
index 65a2562f..00000000
--- a/ANDROID_3.4.5/include/linux/dcbnl.h
+++ /dev/null
@@ -1,672 +0,0 @@
-/*
- * Copyright (c) 2008-2011, Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc., 59 Temple
- * Place - Suite 330, Boston, MA 02111-1307 USA.
- *
- * Author: Lucy Liu <lucy.liu@intel.com>
- */
-
-#ifndef __LINUX_DCBNL_H__
-#define __LINUX_DCBNL_H__
-
-#include <linux/types.h>
-
-/* IEEE 802.1Qaz std supported values */
-#define IEEE_8021QAZ_MAX_TCS	8
-
-#define IEEE_8021QAZ_TSA_STRICT		0
-#define IEEE_8021QAZ_TSA_CB_SHAPER	1
-#define IEEE_8021QAZ_TSA_ETS		2
-#define IEEE_8021QAZ_TSA_VENDOR		255
-
-/* This structure contains the IEEE 802.1Qaz ETS managed object
- *
- * @willing: willing bit in ETS configuration TLV
- * @ets_cap: indicates supported capacity of ets feature
- * @cbs: credit based shaper ets algorithm supported
- * @tc_tx_bw: tc tx bandwidth indexed by traffic class
- * @tc_rx_bw: tc rx bandwidth indexed by traffic class
- * @tc_tsa: TSA Assignment table, indexed by traffic class
- * @prio_tc: priority assignment table mapping 8021Qp to traffic class
- * @tc_reco_bw: recommended tc bandwidth indexed by traffic class for TLV
- * @tc_reco_tsa: recommended tc bandwidth indexed by traffic class for TLV
- * @reco_prio_tc: recommended tc tx bandwidth indexed by traffic class for TLV
- *
- * Recommended values are used to set fields in the ETS recommendation TLV
- * with hardware offloaded LLDP.
- *
- * ----
- *  TSA Assignment 8 bit identifiers
- *	0	strict priority
- *	1	credit-based shaper
- *	2	enhanced transmission selection
- *	3-254	reserved
- *	255	vendor specific
- */
-struct ieee_ets {
-	__u8	willing;
-	__u8	ets_cap;
-	__u8	cbs;
-	__u8	tc_tx_bw[IEEE_8021QAZ_MAX_TCS];
-	__u8	tc_rx_bw[IEEE_8021QAZ_MAX_TCS];
-	__u8	tc_tsa[IEEE_8021QAZ_MAX_TCS];
-	__u8	prio_tc[IEEE_8021QAZ_MAX_TCS];
-	__u8	tc_reco_bw[IEEE_8021QAZ_MAX_TCS];
-	__u8	tc_reco_tsa[IEEE_8021QAZ_MAX_TCS];
-	__u8	reco_prio_tc[IEEE_8021QAZ_MAX_TCS];
-};
-
-/* This structure contains the IEEE 802.1Qaz PFC managed object
- *
- * @pfc_cap: Indicates the number of traffic classes on the local device
- *	     that may simultaneously have PFC enabled.
- * @pfc_en: bitmap indicating pfc enabled traffic classes
- * @mbc: enable macsec bypass capability
- * @delay: the allowance made for a round-trip propagation delay of the
- *	   link in bits.
- * @requests: count of the sent pfc frames
- * @indications: count of the received pfc frames
- */
-struct ieee_pfc {
-	__u8	pfc_cap;
-	__u8	pfc_en;
-	__u8	mbc;
-	__u16	delay;
-	__u64	requests[IEEE_8021QAZ_MAX_TCS];
-	__u64	indications[IEEE_8021QAZ_MAX_TCS];
-};
-
-/* CEE DCBX std supported values */
-#define CEE_DCBX_MAX_PGS	8
-#define CEE_DCBX_MAX_PRIO	8
-
-/**
- * struct cee_pg - CEE Priority-Group managed object
- *
- * @willing: willing bit in the PG tlv
- * @error: error bit in the PG tlv
- * @pg_en: enable bit of the PG feature
- * @tcs_supported: number of traffic classes supported
- * @pg_bw: bandwidth percentage for each priority group
- * @prio_pg: priority to PG mapping indexed by priority
- */
-struct cee_pg {
-	__u8    willing;
-	__u8    error;
-	__u8    pg_en;
-	__u8    tcs_supported;
-	__u8    pg_bw[CEE_DCBX_MAX_PGS];
-	__u8    prio_pg[CEE_DCBX_MAX_PGS];
-};
-
-/**
- * struct cee_pfc - CEE PFC managed object
- *
- * @willing: willing bit in the PFC tlv
- * @error: error bit in the PFC tlv
- * @pfc_en: bitmap indicating pfc enabled traffic classes
- * @tcs_supported: number of traffic classes supported
- */
-struct cee_pfc {
-	__u8    willing;
-	__u8    error;
-	__u8    pfc_en;
-	__u8    tcs_supported;
-};
-
-/* IEEE 802.1Qaz std supported values */
-#define IEEE_8021QAZ_APP_SEL_ETHERTYPE	1
-#define IEEE_8021QAZ_APP_SEL_STREAM	2
-#define IEEE_8021QAZ_APP_SEL_DGRAM	3
-#define IEEE_8021QAZ_APP_SEL_ANY	4
-
-/* This structure contains the IEEE 802.1Qaz APP managed object. This
- * object is also used for the CEE std as well. There is no difference
- * between the objects.
- *
- * @selector: protocol identifier type
- * @protocol: protocol of type indicated
- * @priority: 3-bit unsigned integer indicating priority
- *
- * ----
- *  Selector field values
- *	0	Reserved
- *	1	Ethertype
- *	2	Well known port number over TCP or SCTP
- *	3	Well known port number over UDP or DCCP
- *	4	Well known port number over TCP, SCTP, UDP, or DCCP
- *	5-7	Reserved
- */
-struct dcb_app {
-	__u8	selector;
-	__u8	priority;
-	__u16	protocol;
-};
-
-/**
- * struct dcb_peer_app_info - APP feature information sent by the peer
- *
- * @willing: willing bit in the peer APP tlv
- * @error: error bit in the peer APP tlv
- *
- * In addition to this information the full peer APP tlv also contains
- * a table of 'app_count' APP objects defined above.
- */
-struct dcb_peer_app_info {
-	__u8	willing;
-	__u8	error;
-};
-
-struct dcbmsg {
-	__u8               dcb_family;
-	__u8               cmd;
-	__u16              dcb_pad;
-};
-
-/**
- * enum dcbnl_commands - supported DCB commands
- *
- * @DCB_CMD_UNDEFINED: unspecified command to catch errors
- * @DCB_CMD_GSTATE: request the state of DCB in the device
- * @DCB_CMD_SSTATE: set the state of DCB in the device
- * @DCB_CMD_PGTX_GCFG: request the priority group configuration for Tx
- * @DCB_CMD_PGTX_SCFG: set the priority group configuration for Tx
- * @DCB_CMD_PGRX_GCFG: request the priority group configuration for Rx
- * @DCB_CMD_PGRX_SCFG: set the priority group configuration for Rx
- * @DCB_CMD_PFC_GCFG: request the priority flow control configuration
- * @DCB_CMD_PFC_SCFG: set the priority flow control configuration
- * @DCB_CMD_SET_ALL: apply all changes to the underlying device
- * @DCB_CMD_GPERM_HWADDR: get the permanent MAC address of the underlying
- *                        device.  Only useful when using bonding.
- * @DCB_CMD_GCAP: request the DCB capabilities of the device
- * @DCB_CMD_GNUMTCS: get the number of traffic classes currently supported
- * @DCB_CMD_SNUMTCS: set the number of traffic classes
- * @DCB_CMD_GBCN: set backward congestion notification configuration
- * @DCB_CMD_SBCN: get backward congestion notification configration.
- * @DCB_CMD_GAPP: get application protocol configuration
- * @DCB_CMD_SAPP: set application protocol configuration
- * @DCB_CMD_IEEE_SET: set IEEE 802.1Qaz configuration
- * @DCB_CMD_IEEE_GET: get IEEE 802.1Qaz configuration
- * @DCB_CMD_GDCBX: get DCBX engine configuration
- * @DCB_CMD_SDCBX: set DCBX engine configuration
- * @DCB_CMD_GFEATCFG: get DCBX features flags
- * @DCB_CMD_SFEATCFG: set DCBX features negotiation flags
- * @DCB_CMD_CEE_GET: get CEE aggregated configuration
- * @DCB_CMD_IEEE_DEL: delete IEEE 802.1Qaz configuration
- */
-enum dcbnl_commands {
-	DCB_CMD_UNDEFINED,
-
-	DCB_CMD_GSTATE,
-	DCB_CMD_SSTATE,
-
-	DCB_CMD_PGTX_GCFG,
-	DCB_CMD_PGTX_SCFG,
-	DCB_CMD_PGRX_GCFG,
-	DCB_CMD_PGRX_SCFG,
-
-	DCB_CMD_PFC_GCFG,
-	DCB_CMD_PFC_SCFG,
-
-	DCB_CMD_SET_ALL,
-
-	DCB_CMD_GPERM_HWADDR,
-
-	DCB_CMD_GCAP,
-
-	DCB_CMD_GNUMTCS,
-	DCB_CMD_SNUMTCS,
-
-	DCB_CMD_PFC_GSTATE,
-	DCB_CMD_PFC_SSTATE,
-
-	DCB_CMD_BCN_GCFG,
-	DCB_CMD_BCN_SCFG,
-
-	DCB_CMD_GAPP,
-	DCB_CMD_SAPP,
-
-	DCB_CMD_IEEE_SET,
-	DCB_CMD_IEEE_GET,
-
-	DCB_CMD_GDCBX,
-	DCB_CMD_SDCBX,
-
-	DCB_CMD_GFEATCFG,
-	DCB_CMD_SFEATCFG,
-
-	DCB_CMD_CEE_GET,
-	DCB_CMD_IEEE_DEL,
-
-	__DCB_CMD_ENUM_MAX,
-	DCB_CMD_MAX = __DCB_CMD_ENUM_MAX - 1,
-};
-
-/**
- * enum dcbnl_attrs - DCB top-level netlink attributes
- *
- * @DCB_ATTR_UNDEFINED: unspecified attribute to catch errors
- * @DCB_ATTR_IFNAME: interface name of the underlying device (NLA_STRING)
- * @DCB_ATTR_STATE: enable state of DCB in the device (NLA_U8)
- * @DCB_ATTR_PFC_STATE: enable state of PFC in the device (NLA_U8)
- * @DCB_ATTR_PFC_CFG: priority flow control configuration (NLA_NESTED)
- * @DCB_ATTR_NUM_TC: number of traffic classes supported in the device (NLA_U8)
- * @DCB_ATTR_PG_CFG: priority group configuration (NLA_NESTED)
- * @DCB_ATTR_SET_ALL: bool to commit changes to hardware or not (NLA_U8)
- * @DCB_ATTR_PERM_HWADDR: MAC address of the physical device (NLA_NESTED)
- * @DCB_ATTR_CAP: DCB capabilities of the device (NLA_NESTED)
- * @DCB_ATTR_NUMTCS: number of traffic classes supported (NLA_NESTED)
- * @DCB_ATTR_BCN: backward congestion notification configuration (NLA_NESTED)
- * @DCB_ATTR_IEEE: IEEE 802.1Qaz supported attributes (NLA_NESTED)
- * @DCB_ATTR_DCBX: DCBX engine configuration in the device (NLA_U8)
- * @DCB_ATTR_FEATCFG: DCBX features flags (NLA_NESTED)
- * @DCB_ATTR_CEE: CEE std supported attributes (NLA_NESTED)
- */
-enum dcbnl_attrs {
-	DCB_ATTR_UNDEFINED,
-
-	DCB_ATTR_IFNAME,
-	DCB_ATTR_STATE,
-	DCB_ATTR_PFC_STATE,
-	DCB_ATTR_PFC_CFG,
-	DCB_ATTR_NUM_TC,
-	DCB_ATTR_PG_CFG,
-	DCB_ATTR_SET_ALL,
-	DCB_ATTR_PERM_HWADDR,
-	DCB_ATTR_CAP,
-	DCB_ATTR_NUMTCS,
-	DCB_ATTR_BCN,
-	DCB_ATTR_APP,
-
-	/* IEEE std attributes */
-	DCB_ATTR_IEEE,
-
-	DCB_ATTR_DCBX,
-	DCB_ATTR_FEATCFG,
-
-	/* CEE nested attributes */
-	DCB_ATTR_CEE,
-
-	__DCB_ATTR_ENUM_MAX,
-	DCB_ATTR_MAX = __DCB_ATTR_ENUM_MAX - 1,
-};
-
-/**
- * enum ieee_attrs - IEEE 802.1Qaz get/set attributes
- *
- * @DCB_ATTR_IEEE_UNSPEC: unspecified
- * @DCB_ATTR_IEEE_ETS: negotiated ETS configuration
- * @DCB_ATTR_IEEE_PFC: negotiated PFC configuration
- * @DCB_ATTR_IEEE_APP_TABLE: negotiated APP configuration
- * @DCB_ATTR_IEEE_PEER_ETS: peer ETS configuration - get only
- * @DCB_ATTR_IEEE_PEER_PFC: peer PFC configuration - get only
- * @DCB_ATTR_IEEE_PEER_APP: peer APP tlv - get only
- */
-enum ieee_attrs {
-	DCB_ATTR_IEEE_UNSPEC,
-	DCB_ATTR_IEEE_ETS,
-	DCB_ATTR_IEEE_PFC,
-	DCB_ATTR_IEEE_APP_TABLE,
-	DCB_ATTR_IEEE_PEER_ETS,
-	DCB_ATTR_IEEE_PEER_PFC,
-	DCB_ATTR_IEEE_PEER_APP,
-	__DCB_ATTR_IEEE_MAX
-};
-#define DCB_ATTR_IEEE_MAX (__DCB_ATTR_IEEE_MAX - 1)
-
-enum ieee_attrs_app {
-	DCB_ATTR_IEEE_APP_UNSPEC,
-	DCB_ATTR_IEEE_APP,
-	__DCB_ATTR_IEEE_APP_MAX
-};
-#define DCB_ATTR_IEEE_APP_MAX (__DCB_ATTR_IEEE_APP_MAX - 1)
-
-/**
- * enum cee_attrs - CEE DCBX get attributes.
- *
- * @DCB_ATTR_CEE_UNSPEC: unspecified
- * @DCB_ATTR_CEE_PEER_PG: peer PG configuration - get only
- * @DCB_ATTR_CEE_PEER_PFC: peer PFC configuration - get only
- * @DCB_ATTR_CEE_PEER_APP_TABLE: peer APP tlv - get only
- * @DCB_ATTR_CEE_TX_PG: TX PG configuration (DCB_CMD_PGTX_GCFG)
- * @DCB_ATTR_CEE_RX_PG: RX PG configuration (DCB_CMD_PGRX_GCFG)
- * @DCB_ATTR_CEE_PFC: PFC configuration (DCB_CMD_PFC_GCFG)
- * @DCB_ATTR_CEE_APP_TABLE: APP configuration (multi DCB_CMD_GAPP)
- * @DCB_ATTR_CEE_FEAT: DCBX features flags (DCB_CMD_GFEATCFG)
- *
- * An aggregated collection of the cee std negotiated parameters.
- */
-enum cee_attrs {
-	DCB_ATTR_CEE_UNSPEC,
-	DCB_ATTR_CEE_PEER_PG,
-	DCB_ATTR_CEE_PEER_PFC,
-	DCB_ATTR_CEE_PEER_APP_TABLE,
-	DCB_ATTR_CEE_TX_PG,
-	DCB_ATTR_CEE_RX_PG,
-	DCB_ATTR_CEE_PFC,
-	DCB_ATTR_CEE_APP_TABLE,
-	DCB_ATTR_CEE_FEAT,
-	__DCB_ATTR_CEE_MAX
-};
-#define DCB_ATTR_CEE_MAX (__DCB_ATTR_CEE_MAX - 1)
-
-enum peer_app_attr {
-	DCB_ATTR_CEE_PEER_APP_UNSPEC,
-	DCB_ATTR_CEE_PEER_APP_INFO,
-	DCB_ATTR_CEE_PEER_APP,
-	__DCB_ATTR_CEE_PEER_APP_MAX
-};
-#define DCB_ATTR_CEE_PEER_APP_MAX (__DCB_ATTR_CEE_PEER_APP_MAX - 1)
-
-enum cee_attrs_app {
-	DCB_ATTR_CEE_APP_UNSPEC,
-	DCB_ATTR_CEE_APP,
-	__DCB_ATTR_CEE_APP_MAX
-};
-#define DCB_ATTR_CEE_APP_MAX (__DCB_ATTR_CEE_APP_MAX - 1)
-
-/**
- * enum dcbnl_pfc_attrs - DCB Priority Flow Control user priority nested attrs
- *
- * @DCB_PFC_UP_ATTR_UNDEFINED: unspecified attribute to catch errors
- * @DCB_PFC_UP_ATTR_0: Priority Flow Control value for User Priority 0 (NLA_U8)
- * @DCB_PFC_UP_ATTR_1: Priority Flow Control value for User Priority 1 (NLA_U8)
- * @DCB_PFC_UP_ATTR_2: Priority Flow Control value for User Priority 2 (NLA_U8)
- * @DCB_PFC_UP_ATTR_3: Priority Flow Control value for User Priority 3 (NLA_U8)
- * @DCB_PFC_UP_ATTR_4: Priority Flow Control value for User Priority 4 (NLA_U8)
- * @DCB_PFC_UP_ATTR_5: Priority Flow Control value for User Priority 5 (NLA_U8)
- * @DCB_PFC_UP_ATTR_6: Priority Flow Control value for User Priority 6 (NLA_U8)
- * @DCB_PFC_UP_ATTR_7: Priority Flow Control value for User Priority 7 (NLA_U8)
- * @DCB_PFC_UP_ATTR_MAX: highest attribute number currently defined
- * @DCB_PFC_UP_ATTR_ALL: apply to all priority flow control attrs (NLA_FLAG)
- *
- */
-enum dcbnl_pfc_up_attrs {
-	DCB_PFC_UP_ATTR_UNDEFINED,
-
-	DCB_PFC_UP_ATTR_0,
-	DCB_PFC_UP_ATTR_1,
-	DCB_PFC_UP_ATTR_2,
-	DCB_PFC_UP_ATTR_3,
-	DCB_PFC_UP_ATTR_4,
-	DCB_PFC_UP_ATTR_5,
-	DCB_PFC_UP_ATTR_6,
-	DCB_PFC_UP_ATTR_7,
-	DCB_PFC_UP_ATTR_ALL,
-
-	__DCB_PFC_UP_ATTR_ENUM_MAX,
-	DCB_PFC_UP_ATTR_MAX = __DCB_PFC_UP_ATTR_ENUM_MAX - 1,
-};
-
-/**
- * enum dcbnl_pg_attrs - DCB Priority Group attributes
- *
- * @DCB_PG_ATTR_UNDEFINED: unspecified attribute to catch errors
- * @DCB_PG_ATTR_TC_0: Priority Group Traffic Class 0 configuration (NLA_NESTED)
- * @DCB_PG_ATTR_TC_1: Priority Group Traffic Class 1 configuration (NLA_NESTED)
- * @DCB_PG_ATTR_TC_2: Priority Group Traffic Class 2 configuration (NLA_NESTED)
- * @DCB_PG_ATTR_TC_3: Priority Group Traffic Class 3 configuration (NLA_NESTED)
- * @DCB_PG_ATTR_TC_4: Priority Group Traffic Class 4 configuration (NLA_NESTED)
- * @DCB_PG_ATTR_TC_5: Priority Group Traffic Class 5 configuration (NLA_NESTED)
- * @DCB_PG_ATTR_TC_6: Priority Group Traffic Class 6 configuration (NLA_NESTED)
- * @DCB_PG_ATTR_TC_7: Priority Group Traffic Class 7 configuration (NLA_NESTED)
- * @DCB_PG_ATTR_TC_MAX: highest attribute number currently defined
- * @DCB_PG_ATTR_TC_ALL: apply to all traffic classes (NLA_NESTED)
- * @DCB_PG_ATTR_BW_ID_0: Percent of link bandwidth for Priority Group 0 (NLA_U8)
- * @DCB_PG_ATTR_BW_ID_1: Percent of link bandwidth for Priority Group 1 (NLA_U8)
- * @DCB_PG_ATTR_BW_ID_2: Percent of link bandwidth for Priority Group 2 (NLA_U8)
- * @DCB_PG_ATTR_BW_ID_3: Percent of link bandwidth for Priority Group 3 (NLA_U8)
- * @DCB_PG_ATTR_BW_ID_4: Percent of link bandwidth for Priority Group 4 (NLA_U8)
- * @DCB_PG_ATTR_BW_ID_5: Percent of link bandwidth for Priority Group 5 (NLA_U8)
- * @DCB_PG_ATTR_BW_ID_6: Percent of link bandwidth for Priority Group 6 (NLA_U8)
- * @DCB_PG_ATTR_BW_ID_7: Percent of link bandwidth for Priority Group 7 (NLA_U8)
- * @DCB_PG_ATTR_BW_ID_MAX: highest attribute number currently defined
- * @DCB_PG_ATTR_BW_ID_ALL: apply to all priority groups (NLA_FLAG)
- *
- */
-enum dcbnl_pg_attrs {
-	DCB_PG_ATTR_UNDEFINED,
-
-	DCB_PG_ATTR_TC_0,
-	DCB_PG_ATTR_TC_1,
-	DCB_PG_ATTR_TC_2,
-	DCB_PG_ATTR_TC_3,
-	DCB_PG_ATTR_TC_4,
-	DCB_PG_ATTR_TC_5,
-	DCB_PG_ATTR_TC_6,
-	DCB_PG_ATTR_TC_7,
-	DCB_PG_ATTR_TC_MAX,
-	DCB_PG_ATTR_TC_ALL,
-
-	DCB_PG_ATTR_BW_ID_0,
-	DCB_PG_ATTR_BW_ID_1,
-	DCB_PG_ATTR_BW_ID_2,
-	DCB_PG_ATTR_BW_ID_3,
-	DCB_PG_ATTR_BW_ID_4,
-	DCB_PG_ATTR_BW_ID_5,
-	DCB_PG_ATTR_BW_ID_6,
-	DCB_PG_ATTR_BW_ID_7,
-	DCB_PG_ATTR_BW_ID_MAX,
-	DCB_PG_ATTR_BW_ID_ALL,
-
-	__DCB_PG_ATTR_ENUM_MAX,
-	DCB_PG_ATTR_MAX = __DCB_PG_ATTR_ENUM_MAX - 1,
-};
-
-/**
- * enum dcbnl_tc_attrs - DCB Traffic Class attributes
- *
- * @DCB_TC_ATTR_PARAM_UNDEFINED: unspecified attribute to catch errors
- * @DCB_TC_ATTR_PARAM_PGID: (NLA_U8) Priority group the traffic class belongs to
- *                          Valid values are:  0-7
- * @DCB_TC_ATTR_PARAM_UP_MAPPING: (NLA_U8) Traffic class to user priority map
- *                                Some devices may not support changing the
- *                                user priority map of a TC.
- * @DCB_TC_ATTR_PARAM_STRICT_PRIO: (NLA_U8) Strict priority setting
- *                                 0 - none
- *                                 1 - group strict
- *                                 2 - link strict
- * @DCB_TC_ATTR_PARAM_BW_PCT: optional - (NLA_U8) If supported by the device and
- *                            not configured to use link strict priority,
- *                            this is the percentage of bandwidth of the
- *                            priority group this traffic class belongs to
- * @DCB_TC_ATTR_PARAM_ALL: (NLA_FLAG) all traffic class parameters
- *
- */
-enum dcbnl_tc_attrs {
-	DCB_TC_ATTR_PARAM_UNDEFINED,
-
-	DCB_TC_ATTR_PARAM_PGID,
-	DCB_TC_ATTR_PARAM_UP_MAPPING,
-	DCB_TC_ATTR_PARAM_STRICT_PRIO,
-	DCB_TC_ATTR_PARAM_BW_PCT,
-	DCB_TC_ATTR_PARAM_ALL,
-
-	__DCB_TC_ATTR_PARAM_ENUM_MAX,
-	DCB_TC_ATTR_PARAM_MAX = __DCB_TC_ATTR_PARAM_ENUM_MAX - 1,
-};
-
-/**
- * enum dcbnl_cap_attrs - DCB Capability attributes
- *
- * @DCB_CAP_ATTR_UNDEFINED: unspecified attribute to catch errors
- * @DCB_CAP_ATTR_ALL: (NLA_FLAG) all capability parameters
- * @DCB_CAP_ATTR_PG: (NLA_U8) device supports Priority Groups
- * @DCB_CAP_ATTR_PFC: (NLA_U8) device supports Priority Flow Control
- * @DCB_CAP_ATTR_UP2TC: (NLA_U8) device supports user priority to
- *                               traffic class mapping
- * @DCB_CAP_ATTR_PG_TCS: (NLA_U8) bitmap where each bit represents a
- *                                number of traffic classes the device
- *                                can be configured to use for Priority Groups
- * @DCB_CAP_ATTR_PFC_TCS: (NLA_U8) bitmap where each bit represents a
- *                                 number of traffic classes the device can be
- *                                 configured to use for Priority Flow Control
- * @DCB_CAP_ATTR_GSP: (NLA_U8) device supports group strict priority
- * @DCB_CAP_ATTR_BCN: (NLA_U8) device supports Backwards Congestion
- *                             Notification
- * @DCB_CAP_ATTR_DCBX: (NLA_U8) device supports DCBX engine
- *
- */
-enum dcbnl_cap_attrs {
-	DCB_CAP_ATTR_UNDEFINED,
-	DCB_CAP_ATTR_ALL,
-	DCB_CAP_ATTR_PG,
-	DCB_CAP_ATTR_PFC,
-	DCB_CAP_ATTR_UP2TC,
-	DCB_CAP_ATTR_PG_TCS,
-	DCB_CAP_ATTR_PFC_TCS,
-	DCB_CAP_ATTR_GSP,
-	DCB_CAP_ATTR_BCN,
-	DCB_CAP_ATTR_DCBX,
-
-	__DCB_CAP_ATTR_ENUM_MAX,
-	DCB_CAP_ATTR_MAX = __DCB_CAP_ATTR_ENUM_MAX - 1,
-};
-
-/**
- * DCBX capability flags
- *
- * @DCB_CAP_DCBX_HOST: DCBX negotiation is performed by the host LLDP agent.
- *                     'set' routines are used to configure the device with
- *                     the negotiated parameters
- *
- * @DCB_CAP_DCBX_LLD_MANAGED: DCBX negotiation is not performed in the host but
- *                            by another entity
- *                            'get' routines are used to retrieve the
- *                            negotiated parameters
- *                            'set' routines can be used to set the initial
- *                            negotiation configuration
- *
- * @DCB_CAP_DCBX_VER_CEE: for a non-host DCBX engine, indicates the engine
- *                        supports the CEE protocol flavor
- *
- * @DCB_CAP_DCBX_VER_IEEE: for a non-host DCBX engine, indicates the engine
- *                         supports the IEEE protocol flavor
- *
- * @DCB_CAP_DCBX_STATIC: for a non-host DCBX engine, indicates the engine
- *                       supports static configuration (i.e no actual
- *                       negotiation is performed negotiated parameters equal
- *                       the initial configuration)
- *
- */
-#define DCB_CAP_DCBX_HOST		0x01
-#define DCB_CAP_DCBX_LLD_MANAGED	0x02
-#define DCB_CAP_DCBX_VER_CEE		0x04
-#define DCB_CAP_DCBX_VER_IEEE		0x08
-#define DCB_CAP_DCBX_STATIC		0x10
-
-/**
- * enum dcbnl_numtcs_attrs - number of traffic classes
- *
- * @DCB_NUMTCS_ATTR_UNDEFINED: unspecified attribute to catch errors
- * @DCB_NUMTCS_ATTR_ALL: (NLA_FLAG) all traffic class attributes
- * @DCB_NUMTCS_ATTR_PG: (NLA_U8) number of traffic classes used for
- *                               priority groups
- * @DCB_NUMTCS_ATTR_PFC: (NLA_U8) number of traffic classes which can
- *                                support priority flow control
- */
-enum dcbnl_numtcs_attrs {
-	DCB_NUMTCS_ATTR_UNDEFINED,
-	DCB_NUMTCS_ATTR_ALL,
-	DCB_NUMTCS_ATTR_PG,
-	DCB_NUMTCS_ATTR_PFC,
-
-	__DCB_NUMTCS_ATTR_ENUM_MAX,
-	DCB_NUMTCS_ATTR_MAX = __DCB_NUMTCS_ATTR_ENUM_MAX - 1,
-};
-
-enum dcbnl_bcn_attrs{
-	DCB_BCN_ATTR_UNDEFINED = 0,
-
-	DCB_BCN_ATTR_RP_0,
-	DCB_BCN_ATTR_RP_1,
-	DCB_BCN_ATTR_RP_2,
-	DCB_BCN_ATTR_RP_3,
-	DCB_BCN_ATTR_RP_4,
-	DCB_BCN_ATTR_RP_5,
-	DCB_BCN_ATTR_RP_6,
-	DCB_BCN_ATTR_RP_7,
-	DCB_BCN_ATTR_RP_ALL,
-
-	DCB_BCN_ATTR_BCNA_0,
-	DCB_BCN_ATTR_BCNA_1,
-	DCB_BCN_ATTR_ALPHA,
-	DCB_BCN_ATTR_BETA,
-	DCB_BCN_ATTR_GD,
-	DCB_BCN_ATTR_GI,
-	DCB_BCN_ATTR_TMAX,
-	DCB_BCN_ATTR_TD,
-	DCB_BCN_ATTR_RMIN,
-	DCB_BCN_ATTR_W,
-	DCB_BCN_ATTR_RD,
-	DCB_BCN_ATTR_RU,
-	DCB_BCN_ATTR_WRTT,
-	DCB_BCN_ATTR_RI,
-	DCB_BCN_ATTR_C,
-	DCB_BCN_ATTR_ALL,
-
-	__DCB_BCN_ATTR_ENUM_MAX,
-	DCB_BCN_ATTR_MAX = __DCB_BCN_ATTR_ENUM_MAX - 1,
-};
-
-/**
- * enum dcb_general_attr_values - general DCB attribute values
- *
- * @DCB_ATTR_UNDEFINED: value used to indicate an attribute is not supported
- *
- */
-enum dcb_general_attr_values {
-	DCB_ATTR_VALUE_UNDEFINED = 0xff
-};
-
-#define DCB_APP_IDTYPE_ETHTYPE	0x00
-#define DCB_APP_IDTYPE_PORTNUM	0x01
-enum dcbnl_app_attrs {
-	DCB_APP_ATTR_UNDEFINED,
-
-	DCB_APP_ATTR_IDTYPE,
-	DCB_APP_ATTR_ID,
-	DCB_APP_ATTR_PRIORITY,
-
-	__DCB_APP_ATTR_ENUM_MAX,
-	DCB_APP_ATTR_MAX = __DCB_APP_ATTR_ENUM_MAX - 1,
-};
-
-/**
- * enum dcbnl_featcfg_attrs - features conifiguration flags
- *
- * @DCB_FEATCFG_ATTR_UNDEFINED: unspecified attribute to catch errors
- * @DCB_FEATCFG_ATTR_ALL: (NLA_FLAG) all features configuration attributes
- * @DCB_FEATCFG_ATTR_PG: (NLA_U8) configuration flags for priority groups
- * @DCB_FEATCFG_ATTR_PFC: (NLA_U8) configuration flags for priority
- *                                 flow control
- * @DCB_FEATCFG_ATTR_APP: (NLA_U8) configuration flags for application TLV
- *
- */
-#define DCB_FEATCFG_ERROR	0x01	/* error in feature resolution */
-#define DCB_FEATCFG_ENABLE	0x02	/* enable feature */
-#define DCB_FEATCFG_WILLING	0x04	/* feature is willing */
-#define DCB_FEATCFG_ADVERTISE	0x08	/* advertise feature */
-enum dcbnl_featcfg_attrs {
-	DCB_FEATCFG_ATTR_UNDEFINED,
-	DCB_FEATCFG_ATTR_ALL,
-	DCB_FEATCFG_ATTR_PG,
-	DCB_FEATCFG_ATTR_PFC,
-	DCB_FEATCFG_ATTR_APP,
-
-	__DCB_FEATCFG_ATTR_ENUM_MAX,
-	DCB_FEATCFG_ATTR_MAX = __DCB_FEATCFG_ATTR_ENUM_MAX - 1,
-};
-
-#endif /* __LINUX_DCBNL_H__ */
diff --git a/ANDROID_3.4.5/include/linux/dccp.h b/ANDROID_3.4.5/include/linux/dccp.h
deleted file mode 100644
index eaf95a02..00000000
--- a/ANDROID_3.4.5/include/linux/dccp.h
+++ /dev/null
@@ -1,554 +0,0 @@
-#ifndef _LINUX_DCCP_H
-#define _LINUX_DCCP_H
-
-#include <linux/types.h>
-#include <asm/byteorder.h>
-
-/**
- * struct dccp_hdr - generic part of DCCP packet header
- *
- * @dccph_sport - Relevant port on the endpoint that sent this packet
- * @dccph_dport - Relevant port on the other endpoint
- * @dccph_doff - Data Offset from the start of the DCCP header, in 32-bit words
- * @dccph_ccval - Used by the HC-Sender CCID
- * @dccph_cscov - Parts of the packet that are covered by the Checksum field
- * @dccph_checksum - Internet checksum, depends on dccph_cscov
- * @dccph_x - 0 = 24 bit sequence number, 1 = 48
- * @dccph_type - packet type, see DCCP_PKT_ prefixed macros
- * @dccph_seq - sequence number high or low order 24 bits, depends on dccph_x
- */
-struct dccp_hdr {
-	__be16	dccph_sport,
-		dccph_dport;
-	__u8	dccph_doff;
-#if defined(__LITTLE_ENDIAN_BITFIELD)
-	__u8	dccph_cscov:4,
-		dccph_ccval:4;
-#elif defined(__BIG_ENDIAN_BITFIELD)
-	__u8	dccph_ccval:4,
-		dccph_cscov:4;
-#else
-#error  "Adjust your <asm/byteorder.h> defines"
-#endif
-	__sum16	dccph_checksum;
-#if defined(__LITTLE_ENDIAN_BITFIELD)
-	__u8	dccph_x:1,
-		dccph_type:4,
-		dccph_reserved:3;
-#elif defined(__BIG_ENDIAN_BITFIELD)
-	__u8	dccph_reserved:3,
-		dccph_type:4,
-		dccph_x:1;
-#else
-#error  "Adjust your <asm/byteorder.h> defines"
-#endif
-	__u8	dccph_seq2;
-	__be16	dccph_seq;
-};
-
-/**
- * struct dccp_hdr_ext - the low bits of a 48 bit seq packet
- *
- * @dccph_seq_low - low 24 bits of a 48 bit seq packet
- */
-struct dccp_hdr_ext {
-	__be32	dccph_seq_low;
-};
-
-/**
- * struct dccp_hdr_request - Connection initiation request header
- *
- * @dccph_req_service - Service to which the client app wants to connect
- */
-struct dccp_hdr_request {
-	__be32	dccph_req_service;
-};
-/**
- * struct dccp_hdr_ack_bits - acknowledgment bits common to most packets
- *
- * @dccph_resp_ack_nr_high - 48 bit ack number high order bits, contains GSR
- * @dccph_resp_ack_nr_low - 48 bit ack number low order bits, contains GSR
- */
-struct dccp_hdr_ack_bits {
-	__be16	dccph_reserved1;
-	__be16	dccph_ack_nr_high;
-	__be32	dccph_ack_nr_low;
-};
-/**
- * struct dccp_hdr_response - Connection initiation response header
- *
- * @dccph_resp_ack - 48 bit Acknowledgment Number Subheader (5.3)
- * @dccph_resp_service - Echoes the Service Code on a received DCCP-Request
- */
-struct dccp_hdr_response {
-	struct dccp_hdr_ack_bits	dccph_resp_ack;
-	__be32				dccph_resp_service;
-};
-
-/**
- * struct dccp_hdr_reset - Unconditionally shut down a connection
- *
- * @dccph_reset_ack - 48 bit Acknowledgment Number Subheader (5.6)
- * @dccph_reset_code - one of %dccp_reset_codes
- * @dccph_reset_data - the Data 1 ... Data 3 fields from 5.6
- */
-struct dccp_hdr_reset {
-	struct dccp_hdr_ack_bits	dccph_reset_ack;
-	__u8				dccph_reset_code,
-					dccph_reset_data[3];
-};
-
-enum dccp_pkt_type {
-	DCCP_PKT_REQUEST = 0,
-	DCCP_PKT_RESPONSE,
-	DCCP_PKT_DATA,
-	DCCP_PKT_ACK,
-	DCCP_PKT_DATAACK,
-	DCCP_PKT_CLOSEREQ,
-	DCCP_PKT_CLOSE,
-	DCCP_PKT_RESET,
-	DCCP_PKT_SYNC,
-	DCCP_PKT_SYNCACK,
-	DCCP_PKT_INVALID,
-};
-
-#define DCCP_NR_PKT_TYPES DCCP_PKT_INVALID
-
-static inline unsigned int dccp_packet_hdr_len(const __u8 type)
-{
-	if (type == DCCP_PKT_DATA)
-		return 0;
-	if (type == DCCP_PKT_DATAACK	||
-	    type == DCCP_PKT_ACK	||
-	    type == DCCP_PKT_SYNC	||
-	    type == DCCP_PKT_SYNCACK	||
-	    type == DCCP_PKT_CLOSE	||
-	    type == DCCP_PKT_CLOSEREQ)
-		return sizeof(struct dccp_hdr_ack_bits);
-	if (type == DCCP_PKT_REQUEST)
-		return sizeof(struct dccp_hdr_request);
-	if (type == DCCP_PKT_RESPONSE)
-		return sizeof(struct dccp_hdr_response);
-	return sizeof(struct dccp_hdr_reset);
-}
-enum dccp_reset_codes {
-	DCCP_RESET_CODE_UNSPECIFIED = 0,
-	DCCP_RESET_CODE_CLOSED,
-	DCCP_RESET_CODE_ABORTED,
-	DCCP_RESET_CODE_NO_CONNECTION,
-	DCCP_RESET_CODE_PACKET_ERROR,
-	DCCP_RESET_CODE_OPTION_ERROR,
-	DCCP_RESET_CODE_MANDATORY_ERROR,
-	DCCP_RESET_CODE_CONNECTION_REFUSED,
-	DCCP_RESET_CODE_BAD_SERVICE_CODE,
-	DCCP_RESET_CODE_TOO_BUSY,
-	DCCP_RESET_CODE_BAD_INIT_COOKIE,
-	DCCP_RESET_CODE_AGGRESSION_PENALTY,
-
-	DCCP_MAX_RESET_CODES		/* Leave at the end!  */
-};
-
-/* DCCP options */
-enum {
-	DCCPO_PADDING = 0,
-	DCCPO_MANDATORY = 1,
-	DCCPO_MIN_RESERVED = 3,
-	DCCPO_MAX_RESERVED = 31,
-	DCCPO_CHANGE_L = 32,
-	DCCPO_CONFIRM_L = 33,
-	DCCPO_CHANGE_R = 34,
-	DCCPO_CONFIRM_R = 35,
-	DCCPO_NDP_COUNT = 37,
-	DCCPO_ACK_VECTOR_0 = 38,
-	DCCPO_ACK_VECTOR_1 = 39,
-	DCCPO_TIMESTAMP = 41,
-	DCCPO_TIMESTAMP_ECHO = 42,
-	DCCPO_ELAPSED_TIME = 43,
-	DCCPO_MAX = 45,
-	DCCPO_MIN_RX_CCID_SPECIFIC = 128,	/* from sender to receiver */
-	DCCPO_MAX_RX_CCID_SPECIFIC = 191,
-	DCCPO_MIN_TX_CCID_SPECIFIC = 192,	/* from receiver to sender */
-	DCCPO_MAX_TX_CCID_SPECIFIC = 255,
-};
-/* maximum size of a single TLV-encoded DCCP option (sans type/len bytes) */
-#define DCCP_SINGLE_OPT_MAXLEN	253
-
-/* DCCP CCIDS */
-enum {
-	DCCPC_CCID2 = 2,
-	DCCPC_CCID3 = 3,
-};
-
-/* DCCP features (RFC 4340 section 6.4) */
-enum dccp_feature_numbers {
-	DCCPF_RESERVED = 0,
-	DCCPF_CCID = 1,
-	DCCPF_SHORT_SEQNOS = 2,
-	DCCPF_SEQUENCE_WINDOW = 3,
-	DCCPF_ECN_INCAPABLE = 4,
-	DCCPF_ACK_RATIO = 5,
-	DCCPF_SEND_ACK_VECTOR = 6,
-	DCCPF_SEND_NDP_COUNT = 7,
-	DCCPF_MIN_CSUM_COVER = 8,
-	DCCPF_DATA_CHECKSUM = 9,
-	/* 10-127 reserved */
-	DCCPF_MIN_CCID_SPECIFIC = 128,
-	DCCPF_SEND_LEV_RATE = 192,	/* RFC 4342, sec. 8.4 */
-	DCCPF_MAX_CCID_SPECIFIC = 255,
-};
-
-/* DCCP socket control message types for cmsg */
-enum dccp_cmsg_type {
-	DCCP_SCM_PRIORITY = 1,
-	DCCP_SCM_QPOLICY_MAX = 0xFFFF,
-	/* ^-- Up to here reserved exclusively for qpolicy parameters */
-	DCCP_SCM_MAX
-};
-
-/* DCCP priorities for outgoing/queued packets */
-enum dccp_packet_dequeueing_policy {
-	DCCPQ_POLICY_SIMPLE,
-	DCCPQ_POLICY_PRIO,
-	DCCPQ_POLICY_MAX
-};
-
-/* DCCP socket options */
-#define DCCP_SOCKOPT_PACKET_SIZE	1 /* XXX deprecated, without effect */
-#define DCCP_SOCKOPT_SERVICE		2
-#define DCCP_SOCKOPT_CHANGE_L		3
-#define DCCP_SOCKOPT_CHANGE_R		4
-#define DCCP_SOCKOPT_GET_CUR_MPS	5
-#define DCCP_SOCKOPT_SERVER_TIMEWAIT	6
-#define DCCP_SOCKOPT_SEND_CSCOV		10
-#define DCCP_SOCKOPT_RECV_CSCOV		11
-#define DCCP_SOCKOPT_AVAILABLE_CCIDS	12
-#define DCCP_SOCKOPT_CCID		13
-#define DCCP_SOCKOPT_TX_CCID		14
-#define DCCP_SOCKOPT_RX_CCID		15
-#define DCCP_SOCKOPT_QPOLICY_ID		16
-#define DCCP_SOCKOPT_QPOLICY_TXQLEN	17
-#define DCCP_SOCKOPT_CCID_RX_INFO	128
-#define DCCP_SOCKOPT_CCID_TX_INFO	192
-
-/* maximum number of services provided on the same listening port */
-#define DCCP_SERVICE_LIST_MAX_LEN      32
-
-#ifdef __KERNEL__
-
-#include <linux/in.h>
-#include <linux/interrupt.h>
-#include <linux/ktime.h>
-#include <linux/list.h>
-#include <linux/uio.h>
-#include <linux/workqueue.h>
-
-#include <net/inet_connection_sock.h>
-#include <net/inet_sock.h>
-#include <net/inet_timewait_sock.h>
-#include <net/tcp_states.h>
-
-enum dccp_state {
-	DCCP_OPEN	     = TCP_ESTABLISHED,
-	DCCP_REQUESTING	     = TCP_SYN_SENT,
-	DCCP_LISTEN	     = TCP_LISTEN,
-	DCCP_RESPOND	     = TCP_SYN_RECV,
-	/*
-	 * States involved in closing a DCCP connection:
-	 * 1) ACTIVE_CLOSEREQ is entered by a server sending a CloseReq.
-	 *
-	 * 2) CLOSING can have three different meanings (RFC 4340, 8.3):
-	 *  a. Client has performed active-close, has sent a Close to the server
-	 *     from state OPEN or PARTOPEN, and is waiting for the final Reset
-	 *     (in this case, SOCK_DONE == 1).
-	 *  b. Client is asked to perform passive-close, by receiving a CloseReq
-	 *     in (PART)OPEN state. It sends a Close and waits for final Reset
-	 *     (in this case, SOCK_DONE == 0).
-	 *  c. Server performs an active-close as in (a), keeps TIMEWAIT state.
-	 *
-	 * 3) The following intermediate states are employed to give passively
-	 *    closing nodes a chance to process their unread data:
-	 *    - PASSIVE_CLOSE    (from OPEN => CLOSED) and
-	 *    - PASSIVE_CLOSEREQ (from (PART)OPEN to CLOSING; case (b) above).
-	 */
-	DCCP_ACTIVE_CLOSEREQ = TCP_FIN_WAIT1,
-	DCCP_PASSIVE_CLOSE   = TCP_CLOSE_WAIT,	/* any node receiving a Close */
-	DCCP_CLOSING	     = TCP_CLOSING,
-	DCCP_TIME_WAIT	     = TCP_TIME_WAIT,
-	DCCP_CLOSED	     = TCP_CLOSE,
-	DCCP_PARTOPEN	     = TCP_MAX_STATES,
-	DCCP_PASSIVE_CLOSEREQ,			/* clients receiving CloseReq */
-	DCCP_MAX_STATES
-};
-
-enum {
-	DCCPF_OPEN	      = TCPF_ESTABLISHED,
-	DCCPF_REQUESTING      = TCPF_SYN_SENT,
-	DCCPF_LISTEN	      = TCPF_LISTEN,
-	DCCPF_RESPOND	      = TCPF_SYN_RECV,
-	DCCPF_ACTIVE_CLOSEREQ = TCPF_FIN_WAIT1,
-	DCCPF_CLOSING	      = TCPF_CLOSING,
-	DCCPF_TIME_WAIT	      = TCPF_TIME_WAIT,
-	DCCPF_CLOSED	      = TCPF_CLOSE,
-	DCCPF_PARTOPEN	      = (1 << DCCP_PARTOPEN),
-};
-
-static inline struct dccp_hdr *dccp_hdr(const struct sk_buff *skb)
-{
-	return (struct dccp_hdr *)skb_transport_header(skb);
-}
-
-static inline struct dccp_hdr *dccp_zeroed_hdr(struct sk_buff *skb, int headlen)
-{
-	skb_push(skb, headlen);
-	skb_reset_transport_header(skb);
-	return memset(skb_transport_header(skb), 0, headlen);
-}
-
-static inline struct dccp_hdr_ext *dccp_hdrx(const struct dccp_hdr *dh)
-{
-	return (struct dccp_hdr_ext *)((unsigned char *)dh + sizeof(*dh));
-}
-
-static inline unsigned int __dccp_basic_hdr_len(const struct dccp_hdr *dh)
-{
-	return sizeof(*dh) + (dh->dccph_x ? sizeof(struct dccp_hdr_ext) : 0);
-}
-
-static inline unsigned int dccp_basic_hdr_len(const struct sk_buff *skb)
-{
-	const struct dccp_hdr *dh = dccp_hdr(skb);
-	return __dccp_basic_hdr_len(dh);
-}
-
-static inline __u64 dccp_hdr_seq(const struct dccp_hdr *dh)
-{
-	__u64 seq_nr =  ntohs(dh->dccph_seq);
-
-	if (dh->dccph_x != 0)
-		seq_nr = (seq_nr << 32) + ntohl(dccp_hdrx(dh)->dccph_seq_low);
-	else
-		seq_nr += (u32)dh->dccph_seq2 << 16;
-
-	return seq_nr;
-}
-
-static inline struct dccp_hdr_request *dccp_hdr_request(struct sk_buff *skb)
-{
-	return (struct dccp_hdr_request *)(skb_transport_header(skb) +
-					   dccp_basic_hdr_len(skb));
-}
-
-static inline struct dccp_hdr_ack_bits *dccp_hdr_ack_bits(const struct sk_buff *skb)
-{
-	return (struct dccp_hdr_ack_bits *)(skb_transport_header(skb) +
-					    dccp_basic_hdr_len(skb));
-}
-
-static inline u64 dccp_hdr_ack_seq(const struct sk_buff *skb)
-{
-	const struct dccp_hdr_ack_bits *dhack = dccp_hdr_ack_bits(skb);
-	return ((u64)ntohs(dhack->dccph_ack_nr_high) << 32) + ntohl(dhack->dccph_ack_nr_low);
-}
-
-static inline struct dccp_hdr_response *dccp_hdr_response(struct sk_buff *skb)
-{
-	return (struct dccp_hdr_response *)(skb_transport_header(skb) +
-					    dccp_basic_hdr_len(skb));
-}
-
-static inline struct dccp_hdr_reset *dccp_hdr_reset(struct sk_buff *skb)
-{
-	return (struct dccp_hdr_reset *)(skb_transport_header(skb) +
-					 dccp_basic_hdr_len(skb));
-}
-
-static inline unsigned int __dccp_hdr_len(const struct dccp_hdr *dh)
-{
-	return __dccp_basic_hdr_len(dh) +
-	       dccp_packet_hdr_len(dh->dccph_type);
-}
-
-static inline unsigned int dccp_hdr_len(const struct sk_buff *skb)
-{
-	return __dccp_hdr_len(dccp_hdr(skb));
-}
-
-/**
- * struct dccp_request_sock  -  represent DCCP-specific connection request
- * @dreq_inet_rsk: structure inherited from
- * @dreq_iss: initial sequence number, sent on the first Response (RFC 4340, 7.1)
- * @dreq_gss: greatest sequence number sent (for retransmitted Responses)
- * @dreq_isr: initial sequence number received in the first Request
- * @dreq_gsr: greatest sequence number received (for retransmitted Request(s))
- * @dreq_service: service code present on the Request (there is just one)
- * @dreq_featneg: feature negotiation options for this connection
- * The following two fields are analogous to the ones in dccp_sock:
- * @dreq_timestamp_echo: last received timestamp to echo (13.1)
- * @dreq_timestamp_echo: the time of receiving the last @dreq_timestamp_echo
- */
-struct dccp_request_sock {
-	struct inet_request_sock dreq_inet_rsk;
-	__u64			 dreq_iss;
-	__u64			 dreq_gss;
-	__u64			 dreq_isr;
-	__u64			 dreq_gsr;
-	__be32			 dreq_service;
-	struct list_head	 dreq_featneg;
-	__u32			 dreq_timestamp_echo;
-	__u32			 dreq_timestamp_time;
-};
-
-static inline struct dccp_request_sock *dccp_rsk(const struct request_sock *req)
-{
-	return (struct dccp_request_sock *)req;
-}
-
-extern struct inet_timewait_death_row dccp_death_row;
-
-extern int dccp_parse_options(struct sock *sk, struct dccp_request_sock *dreq,
-			      struct sk_buff *skb);
-
-struct dccp_options_received {
-	u64	dccpor_ndp:48;
-	u32	dccpor_timestamp;
-	u32	dccpor_timestamp_echo;
-	u32	dccpor_elapsed_time;
-};
-
-struct ccid;
-
-enum dccp_role {
-	DCCP_ROLE_UNDEFINED,
-	DCCP_ROLE_LISTEN,
-	DCCP_ROLE_CLIENT,
-	DCCP_ROLE_SERVER,
-};
-
-struct dccp_service_list {
-	__u32	dccpsl_nr;
-	__be32	dccpsl_list[0];
-};
-
-#define DCCP_SERVICE_INVALID_VALUE htonl((__u32)-1)
-#define DCCP_SERVICE_CODE_IS_ABSENT		0
-
-static inline int dccp_list_has_service(const struct dccp_service_list *sl,
-					const __be32 service)
-{
-	if (likely(sl != NULL)) {
-		u32 i = sl->dccpsl_nr;
-		while (i--)
-			if (sl->dccpsl_list[i] == service)
-				return 1;
-	}
-	return 0;
-}
-
-struct dccp_ackvec;
-
-/**
- * struct dccp_sock - DCCP socket state
- *
- * @dccps_swl - sequence number window low
- * @dccps_swh - sequence number window high
- * @dccps_awl - acknowledgement number window low
- * @dccps_awh - acknowledgement number window high
- * @dccps_iss - initial sequence number sent
- * @dccps_isr - initial sequence number received
- * @dccps_osr - first OPEN sequence number received
- * @dccps_gss - greatest sequence number sent
- * @dccps_gsr - greatest valid sequence number received
- * @dccps_gar - greatest valid ack number received on a non-Sync; initialized to %dccps_iss
- * @dccps_service - first (passive sock) or unique (active sock) service code
- * @dccps_service_list - second .. last service code on passive socket
- * @dccps_timestamp_echo - latest timestamp received on a TIMESTAMP option
- * @dccps_timestamp_time - time of receiving latest @dccps_timestamp_echo
- * @dccps_l_ack_ratio - feature-local Ack Ratio
- * @dccps_r_ack_ratio - feature-remote Ack Ratio
- * @dccps_l_seq_win - local Sequence Window (influences ack number validity)
- * @dccps_r_seq_win - remote Sequence Window (influences seq number validity)
- * @dccps_pcslen - sender   partial checksum coverage (via sockopt)
- * @dccps_pcrlen - receiver partial checksum coverage (via sockopt)
- * @dccps_send_ndp_count - local Send NDP Count feature (7.7.2)
- * @dccps_ndp_count - number of Non Data Packets since last data packet
- * @dccps_mss_cache - current value of MSS (path MTU minus header sizes)
- * @dccps_rate_last - timestamp for rate-limiting DCCP-Sync (RFC 4340, 7.5.4)
- * @dccps_featneg - tracks feature-negotiation state (mostly during handshake)
- * @dccps_hc_rx_ackvec - rx half connection ack vector
- * @dccps_hc_rx_ccid - CCID used for the receiver (or receiving half-connection)
- * @dccps_hc_tx_ccid - CCID used for the sender (or sending half-connection)
- * @dccps_options_received - parsed set of retrieved options
- * @dccps_qpolicy - TX dequeueing policy, one of %dccp_packet_dequeueing_policy
- * @dccps_tx_qlen - maximum length of the TX queue
- * @dccps_role - role of this sock, one of %dccp_role
- * @dccps_hc_rx_insert_options - receiver wants to add options when acking
- * @dccps_hc_tx_insert_options - sender wants to add options when sending
- * @dccps_server_timewait - server holds timewait state on close (RFC 4340, 8.3)
- * @dccps_sync_scheduled - flag which signals "send out-of-band message soon"
- * @dccps_xmitlet - tasklet scheduled by the TX CCID to dequeue data packets
- * @dccps_xmit_timer - used by the TX CCID to delay sending (rate-based pacing)
- * @dccps_syn_rtt - RTT sample from Request/Response exchange (in usecs)
- */
-struct dccp_sock {
-	/* inet_connection_sock has to be the first member of dccp_sock */
-	struct inet_connection_sock	dccps_inet_connection;
-#define dccps_syn_rtt			dccps_inet_connection.icsk_ack.lrcvtime
-	__u64				dccps_swl;
-	__u64				dccps_swh;
-	__u64				dccps_awl;
-	__u64				dccps_awh;
-	__u64				dccps_iss;
-	__u64				dccps_isr;
-	__u64				dccps_osr;
-	__u64				dccps_gss;
-	__u64				dccps_gsr;
-	__u64				dccps_gar;
-	__be32				dccps_service;
-	__u32				dccps_mss_cache;
-	struct dccp_service_list	*dccps_service_list;
-	__u32				dccps_timestamp_echo;
-	__u32				dccps_timestamp_time;
-	__u16				dccps_l_ack_ratio;
-	__u16				dccps_r_ack_ratio;
-	__u64				dccps_l_seq_win:48;
-	__u64				dccps_r_seq_win:48;
-	__u8				dccps_pcslen:4;
-	__u8				dccps_pcrlen:4;
-	__u8				dccps_send_ndp_count:1;
-	__u64				dccps_ndp_count:48;
-	unsigned long			dccps_rate_last;
-	struct list_head		dccps_featneg;
-	struct dccp_ackvec		*dccps_hc_rx_ackvec;
-	struct ccid			*dccps_hc_rx_ccid;
-	struct ccid			*dccps_hc_tx_ccid;
-	struct dccp_options_received	dccps_options_received;
-	__u8				dccps_qpolicy;
-	__u32				dccps_tx_qlen;
-	enum dccp_role			dccps_role:2;
-	__u8				dccps_hc_rx_insert_options:1;
-	__u8				dccps_hc_tx_insert_options:1;
-	__u8				dccps_server_timewait:1;
-	__u8				dccps_sync_scheduled:1;
-	struct tasklet_struct		dccps_xmitlet;
-	struct timer_list		dccps_xmit_timer;
-};
-
-static inline struct dccp_sock *dccp_sk(const struct sock *sk)
-{
-	return (struct dccp_sock *)sk;
-}
-
-static inline const char *dccp_role(const struct sock *sk)
-{
-	switch (dccp_sk(sk)->dccps_role) {
-	case DCCP_ROLE_UNDEFINED: return "undefined";
-	case DCCP_ROLE_LISTEN:	  return "listen";
-	case DCCP_ROLE_SERVER:	  return "server";
-	case DCCP_ROLE_CLIENT:	  return "client";
-	}
-	return NULL;
-}
-
-#endif /* __KERNEL__ */
-
-#endif /* _LINUX_DCCP_H */
diff --git a/ANDROID_3.4.5/include/linux/dcookies.h b/ANDROID_3.4.5/include/linux/dcookies.h
deleted file mode 100644
index 5ac3bdd5..00000000
--- a/ANDROID_3.4.5/include/linux/dcookies.h
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * dcookies.h
- *
- * Persistent cookie-path mappings
- *
- * Copyright 2002 John Levon <levon@movementarian.org>
- */
-
-#ifndef DCOOKIES_H
-#define DCOOKIES_H
- 
-
-#ifdef CONFIG_PROFILING
- 
-#include <linux/dcache.h>
-#include <linux/types.h>
- 
-struct dcookie_user;
-struct path;
- 
-/**
- * dcookie_register - register a user of dcookies
- *
- * Register as a dcookie user. Returns %NULL on failure.
- */
-struct dcookie_user * dcookie_register(void);
-
-/**
- * dcookie_unregister - unregister a user of dcookies
- *
- * Unregister as a dcookie user. This may invalidate
- * any dcookie values returned from get_dcookie().
- */
-void dcookie_unregister(struct dcookie_user * user);
-  
-/**
- * get_dcookie - acquire a dcookie
- *
- * Convert the given dentry/vfsmount pair into
- * a cookie value.
- *
- * Returns -EINVAL if no living task has registered as a
- * dcookie user.
- *
- * Returns 0 on success, with *cookie filled in
- */
-int get_dcookie(struct path *path, unsigned long *cookie);
-
-#else
-
-static inline struct dcookie_user * dcookie_register(void)
-{
-	return NULL;
-}
-
-static inline void dcookie_unregister(struct dcookie_user * user)
-{
-	return;
-}
-
-static inline int get_dcookie(struct path *path, unsigned long *cookie)
-{
-	return -ENOSYS;
-}
-
-#endif /* CONFIG_PROFILING */
-
-#endif /* DCOOKIES_H */
diff --git a/ANDROID_3.4.5/include/linux/debug_locks.h b/ANDROID_3.4.5/include/linux/debug_locks.h
deleted file mode 100644
index 3bd46f76..00000000
--- a/ANDROID_3.4.5/include/linux/debug_locks.h
+++ /dev/null
@@ -1,75 +0,0 @@
-#ifndef __LINUX_DEBUG_LOCKING_H
-#define __LINUX_DEBUG_LOCKING_H
-
-#include <linux/kernel.h>
-#include <linux/atomic.h>
-#include <linux/bug.h>
-
-struct task_struct;
-
-extern int debug_locks;
-extern int debug_locks_silent;
-
-
-static inline int __debug_locks_off(void)
-{
-	return xchg(&debug_locks, 0);
-}
-
-/*
- * Generic 'turn off all lock debugging' function:
- */
-extern int debug_locks_off(void);
-
-#define DEBUG_LOCKS_WARN_ON(c)						\
-({									\
-	int __ret = 0;							\
-									\
-	if (!oops_in_progress && unlikely(c)) {				\
-		if (debug_locks_off() && !debug_locks_silent)		\
-			WARN_ON(1);					\
-		__ret = 1;						\
-	}								\
-	__ret;								\
-})
-
-#ifdef CONFIG_SMP
-# define SMP_DEBUG_LOCKS_WARN_ON(c)			DEBUG_LOCKS_WARN_ON(c)
-#else
-# define SMP_DEBUG_LOCKS_WARN_ON(c)			do { } while (0)
-#endif
-
-#ifdef CONFIG_DEBUG_LOCKING_API_SELFTESTS
-  extern void locking_selftest(void);
-#else
-# define locking_selftest()	do { } while (0)
-#endif
-
-struct task_struct;
-
-#ifdef CONFIG_LOCKDEP
-extern void debug_show_all_locks(void);
-extern void debug_show_held_locks(struct task_struct *task);
-extern void debug_check_no_locks_freed(const void *from, unsigned long len);
-extern void debug_check_no_locks_held(struct task_struct *task);
-#else
-static inline void debug_show_all_locks(void)
-{
-}
-
-static inline void debug_show_held_locks(struct task_struct *task)
-{
-}
-
-static inline void
-debug_check_no_locks_freed(const void *from, unsigned long len)
-{
-}
-
-static inline void
-debug_check_no_locks_held(struct task_struct *task)
-{
-}
-#endif
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/debugfs.h b/ANDROID_3.4.5/include/linux/debugfs.h
deleted file mode 100644
index ae36b72c..00000000
--- a/ANDROID_3.4.5/include/linux/debugfs.h
+++ /dev/null
@@ -1,224 +0,0 @@
-/*
- *  debugfs.h - a tiny little debug file system
- *
- *  Copyright (C) 2004 Greg Kroah-Hartman <greg@kroah.com>
- *  Copyright (C) 2004 IBM Inc.
- *
- *	This program is free software; you can redistribute it and/or
- *	modify it under the terms of the GNU General Public License version
- *	2 as published by the Free Software Foundation.
- *
- *  debugfs is for people to use instead of /proc or /sys.
- *  See Documentation/DocBook/filesystems for more details.
- */
-
-#ifndef _DEBUGFS_H_
-#define _DEBUGFS_H_
-
-#include <linux/fs.h>
-#include <linux/seq_file.h>
-
-#include <linux/types.h>
-
-struct file_operations;
-
-struct debugfs_blob_wrapper {
-	void *data;
-	unsigned long size;
-};
-
-struct debugfs_reg32 {
-	char *name;
-	unsigned long offset;
-};
-
-struct debugfs_regset32 {
-	struct debugfs_reg32 *regs;
-	int nregs;
-	void __iomem *base;
-};
-
-extern struct dentry *arch_debugfs_dir;
-
-#if defined(CONFIG_DEBUG_FS)
-
-/* declared over in file.c */
-extern const struct file_operations debugfs_file_operations;
-extern const struct inode_operations debugfs_link_operations;
-
-struct dentry *debugfs_create_file(const char *name, umode_t mode,
-				   struct dentry *parent, void *data,
-				   const struct file_operations *fops);
-
-struct dentry *debugfs_create_dir(const char *name, struct dentry *parent);
-
-struct dentry *debugfs_create_symlink(const char *name, struct dentry *parent,
-				      const char *dest);
-
-void debugfs_remove(struct dentry *dentry);
-void debugfs_remove_recursive(struct dentry *dentry);
-
-struct dentry *debugfs_rename(struct dentry *old_dir, struct dentry *old_dentry,
-                struct dentry *new_dir, const char *new_name);
-
-struct dentry *debugfs_create_u8(const char *name, umode_t mode,
-				 struct dentry *parent, u8 *value);
-struct dentry *debugfs_create_u16(const char *name, umode_t mode,
-				  struct dentry *parent, u16 *value);
-struct dentry *debugfs_create_u32(const char *name, umode_t mode,
-				  struct dentry *parent, u32 *value);
-struct dentry *debugfs_create_u64(const char *name, umode_t mode,
-				  struct dentry *parent, u64 *value);
-struct dentry *debugfs_create_x8(const char *name, umode_t mode,
-				 struct dentry *parent, u8 *value);
-struct dentry *debugfs_create_x16(const char *name, umode_t mode,
-				  struct dentry *parent, u16 *value);
-struct dentry *debugfs_create_x32(const char *name, umode_t mode,
-				  struct dentry *parent, u32 *value);
-struct dentry *debugfs_create_x64(const char *name, umode_t mode,
-				  struct dentry *parent, u64 *value);
-struct dentry *debugfs_create_size_t(const char *name, umode_t mode,
-				     struct dentry *parent, size_t *value);
-struct dentry *debugfs_create_bool(const char *name, umode_t mode,
-				  struct dentry *parent, u32 *value);
-
-struct dentry *debugfs_create_blob(const char *name, umode_t mode,
-				  struct dentry *parent,
-				  struct debugfs_blob_wrapper *blob);
-
-struct dentry *debugfs_create_regset32(const char *name, umode_t mode,
-				     struct dentry *parent,
-				     struct debugfs_regset32 *regset);
-
-int debugfs_print_regs32(struct seq_file *s, const struct debugfs_reg32 *regs,
-			 int nregs, void __iomem *base, char *prefix);
-
-bool debugfs_initialized(void);
-
-#else
-
-#include <linux/err.h>
-
-/* 
- * We do not return NULL from these functions if CONFIG_DEBUG_FS is not enabled
- * so users have a chance to detect if there was a real error or not.  We don't
- * want to duplicate the design decision mistakes of procfs and devfs again.
- */
-
-static inline struct dentry *debugfs_create_file(const char *name, umode_t mode,
-					struct dentry *parent, void *data,
-					const struct file_operations *fops)
-{
-	return ERR_PTR(-ENODEV);
-}
-
-static inline struct dentry *debugfs_create_dir(const char *name,
-						struct dentry *parent)
-{
-	return ERR_PTR(-ENODEV);
-}
-
-static inline struct dentry *debugfs_create_symlink(const char *name,
-						    struct dentry *parent,
-						    const char *dest)
-{
-	return ERR_PTR(-ENODEV);
-}
-
-static inline void debugfs_remove(struct dentry *dentry)
-{ }
-
-static inline void debugfs_remove_recursive(struct dentry *dentry)
-{ }
-
-static inline struct dentry *debugfs_rename(struct dentry *old_dir, struct dentry *old_dentry,
-                struct dentry *new_dir, char *new_name)
-{
-	return ERR_PTR(-ENODEV);
-}
-
-static inline struct dentry *debugfs_create_u8(const char *name, umode_t mode,
-					       struct dentry *parent,
-					       u8 *value)
-{
-	return ERR_PTR(-ENODEV);
-}
-
-static inline struct dentry *debugfs_create_u16(const char *name, umode_t mode,
-						struct dentry *parent,
-						u16 *value)
-{
-	return ERR_PTR(-ENODEV);
-}
-
-static inline struct dentry *debugfs_create_u32(const char *name, umode_t mode,
-						struct dentry *parent,
-						u32 *value)
-{
-	return ERR_PTR(-ENODEV);
-}
-
-static inline struct dentry *debugfs_create_u64(const char *name, umode_t mode,
-						struct dentry *parent,
-						u64 *value)
-{
-	return ERR_PTR(-ENODEV);
-}
-
-static inline struct dentry *debugfs_create_x8(const char *name, umode_t mode,
-					       struct dentry *parent,
-					       u8 *value)
-{
-	return ERR_PTR(-ENODEV);
-}
-
-static inline struct dentry *debugfs_create_x16(const char *name, umode_t mode,
-						struct dentry *parent,
-						u16 *value)
-{
-	return ERR_PTR(-ENODEV);
-}
-
-static inline struct dentry *debugfs_create_x32(const char *name, umode_t mode,
-						struct dentry *parent,
-						u32 *value)
-{
-	return ERR_PTR(-ENODEV);
-}
-
-static inline struct dentry *debugfs_create_size_t(const char *name, umode_t mode,
-				     struct dentry *parent,
-				     size_t *value)
-{
-	return ERR_PTR(-ENODEV);
-}
-
-static inline struct dentry *debugfs_create_bool(const char *name, umode_t mode,
-						 struct dentry *parent,
-						 u32 *value)
-{
-	return ERR_PTR(-ENODEV);
-}
-
-static inline struct dentry *debugfs_create_blob(const char *name, umode_t mode,
-				  struct dentry *parent,
-				  struct debugfs_blob_wrapper *blob)
-{
-	return ERR_PTR(-ENODEV);
-}
-
-static inline struct dentry *debugfs_create_regset32(const char *name,
-				   umode_t mode, struct dentry *parent,
-				   struct debugfs_regset32 *regset)
-{
-	return ERR_PTR(-ENODEV);
-}
-
-static inline bool debugfs_initialized(void)
-{
-	return false;
-}
-
-#endif
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/debugobjects.h b/ANDROID_3.4.5/include/linux/debugobjects.h
deleted file mode 100644
index 0e5f5785..00000000
--- a/ANDROID_3.4.5/include/linux/debugobjects.h
+++ /dev/null
@@ -1,110 +0,0 @@
-#ifndef _LINUX_DEBUGOBJECTS_H
-#define _LINUX_DEBUGOBJECTS_H
-
-#include <linux/list.h>
-#include <linux/spinlock.h>
-
-enum debug_obj_state {
-	ODEBUG_STATE_NONE,
-	ODEBUG_STATE_INIT,
-	ODEBUG_STATE_INACTIVE,
-	ODEBUG_STATE_ACTIVE,
-	ODEBUG_STATE_DESTROYED,
-	ODEBUG_STATE_NOTAVAILABLE,
-	ODEBUG_STATE_MAX,
-};
-
-struct debug_obj_descr;
-
-/**
- * struct debug_obj - representaion of an tracked object
- * @node:	hlist node to link the object into the tracker list
- * @state:	tracked object state
- * @astate:	current active state
- * @object:	pointer to the real object
- * @descr:	pointer to an object type specific debug description structure
- */
-struct debug_obj {
-	struct hlist_node	node;
-	enum debug_obj_state	state;
-	unsigned int		astate;
-	void			*object;
-	struct debug_obj_descr	*descr;
-};
-
-/**
- * struct debug_obj_descr - object type specific debug description structure
- *
- * @name:		name of the object typee
- * @debug_hint:		function returning address, which have associated
- *			kernel symbol, to allow identify the object
- * @fixup_init:		fixup function, which is called when the init check
- *			fails
- * @fixup_activate:	fixup function, which is called when the activate check
- *			fails
- * @fixup_destroy:	fixup function, which is called when the destroy check
- *			fails
- * @fixup_free:		fixup function, which is called when the free check
- *			fails
- * @fixup_assert_init:  fixup function, which is called when the assert_init
- *			check fails
- */
-struct debug_obj_descr {
-	const char		*name;
-	void *(*debug_hint)	(void *addr);
-	int (*fixup_init)	(void *addr, enum debug_obj_state state);
-	int (*fixup_activate)	(void *addr, enum debug_obj_state state);
-	int (*fixup_destroy)	(void *addr, enum debug_obj_state state);
-	int (*fixup_free)	(void *addr, enum debug_obj_state state);
-	int (*fixup_assert_init)(void *addr, enum debug_obj_state state);
-};
-
-#ifdef CONFIG_DEBUG_OBJECTS
-extern void debug_object_init      (void *addr, struct debug_obj_descr *descr);
-extern void
-debug_object_init_on_stack(void *addr, struct debug_obj_descr *descr);
-extern void debug_object_activate  (void *addr, struct debug_obj_descr *descr);
-extern void debug_object_deactivate(void *addr, struct debug_obj_descr *descr);
-extern void debug_object_destroy   (void *addr, struct debug_obj_descr *descr);
-extern void debug_object_free      (void *addr, struct debug_obj_descr *descr);
-extern void debug_object_assert_init(void *addr, struct debug_obj_descr *descr);
-
-/*
- * Active state:
- * - Set at 0 upon initialization.
- * - Must return to 0 before deactivation.
- */
-extern void
-debug_object_active_state(void *addr, struct debug_obj_descr *descr,
-			  unsigned int expect, unsigned int next);
-
-extern void debug_objects_early_init(void);
-extern void debug_objects_mem_init(void);
-#else
-static inline void
-debug_object_init      (void *addr, struct debug_obj_descr *descr) { }
-static inline void
-debug_object_init_on_stack(void *addr, struct debug_obj_descr *descr) { }
-static inline void
-debug_object_activate  (void *addr, struct debug_obj_descr *descr) { }
-static inline void
-debug_object_deactivate(void *addr, struct debug_obj_descr *descr) { }
-static inline void
-debug_object_destroy   (void *addr, struct debug_obj_descr *descr) { }
-static inline void
-debug_object_free      (void *addr, struct debug_obj_descr *descr) { }
-static inline void
-debug_object_assert_init(void *addr, struct debug_obj_descr *descr) { }
-
-static inline void debug_objects_early_init(void) { }
-static inline void debug_objects_mem_init(void) { }
-#endif
-
-#ifdef CONFIG_DEBUG_OBJECTS_FREE
-extern void debug_check_no_obj_freed(const void *address, unsigned long size);
-#else
-static inline void
-debug_check_no_obj_freed(const void *address, unsigned long size) { }
-#endif
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/decompress/bunzip2.h b/ANDROID_3.4.5/include/linux/decompress/bunzip2.h
deleted file mode 100644
index 11527213..00000000
--- a/ANDROID_3.4.5/include/linux/decompress/bunzip2.h
+++ /dev/null
@@ -1,10 +0,0 @@
-#ifndef DECOMPRESS_BUNZIP2_H
-#define DECOMPRESS_BUNZIP2_H
-
-int bunzip2(unsigned char *inbuf, int len,
-	    int(*fill)(void*, unsigned int),
-	    int(*flush)(void*, unsigned int),
-	    unsigned char *output,
-	    int *pos,
-	    void(*error)(char *x));
-#endif
diff --git a/ANDROID_3.4.5/include/linux/decompress/generic.h b/ANDROID_3.4.5/include/linux/decompress/generic.h
deleted file mode 100644
index 0c7111a5..00000000
--- a/ANDROID_3.4.5/include/linux/decompress/generic.h
+++ /dev/null
@@ -1,39 +0,0 @@
-#ifndef DECOMPRESS_GENERIC_H
-#define DECOMPRESS_GENERIC_H
-
-typedef int (*decompress_fn) (unsigned char *inbuf, int len,
-			      int(*fill)(void*, unsigned int),
-			      int(*flush)(void*, unsigned int),
-			      unsigned char *outbuf,
-			      int *posp,
-			      void(*error)(char *x));
-
-/* inbuf   - input buffer
- *len     - len of pre-read data in inbuf
- *fill    - function to fill inbuf when empty
- *flush   - function to write out outbuf
- *outbuf  - output buffer
- *posp    - if non-null, input position (number of bytes read) will be
- *	  returned here
- *
- *If len != 0, inbuf should contain all the necessary input data, and fill
- *should be NULL
- *If len = 0, inbuf can be NULL, in which case the decompressor will allocate
- *the input buffer.  If inbuf != NULL it must be at least XXX_IOBUF_SIZE bytes.
- *fill will be called (repeatedly...) to read data, at most XXX_IOBUF_SIZE
- *bytes should be read per call.  Replace XXX with the appropriate decompressor
- *name, i.e. LZMA_IOBUF_SIZE.
- *
- *If flush = NULL, outbuf must be large enough to buffer all the expected
- *output.  If flush != NULL, the output buffer will be allocated by the
- *decompressor (outbuf = NULL), and the flush function will be called to
- *flush the output buffer at the appropriate time (decompressor and stream
- *dependent).
- */
-
-
-/* Utility routine to detect the decompression method */
-decompress_fn decompress_method(const unsigned char *inbuf, int len,
-				const char **name);
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/decompress/inflate.h b/ANDROID_3.4.5/include/linux/decompress/inflate.h
deleted file mode 100644
index 8c0aef1b..00000000
--- a/ANDROID_3.4.5/include/linux/decompress/inflate.h
+++ /dev/null
@@ -1,10 +0,0 @@
-#ifndef INFLATE_H
-#define INFLATE_H
-
-int gunzip(unsigned char *inbuf, int len,
-	   int(*fill)(void*, unsigned int),
-	   int(*flush)(void*, unsigned int),
-	   unsigned char *output,
-	   int *pos,
-	   void(*error_fn)(char *x));
-#endif
diff --git a/ANDROID_3.4.5/include/linux/decompress/mm.h b/ANDROID_3.4.5/include/linux/decompress/mm.h
deleted file mode 100644
index 7925bf0e..00000000
--- a/ANDROID_3.4.5/include/linux/decompress/mm.h
+++ /dev/null
@@ -1,93 +0,0 @@
-/*
- * linux/compr_mm.h
- *
- * Memory management for pre-boot and ramdisk uncompressors
- *
- * Authors: Alain Knaff <alain@knaff.lu>
- *
- */
-
-#ifndef DECOMPR_MM_H
-#define DECOMPR_MM_H
-
-#ifdef STATIC
-
-/* Code active when included from pre-boot environment: */
-
-/*
- * Some architectures want to ensure there is no local data in their
- * pre-boot environment, so that data can arbitrarily relocated (via
- * GOT references).  This is achieved by defining STATIC_RW_DATA to
- * be null.
- */
-#ifndef STATIC_RW_DATA
-#define STATIC_RW_DATA static
-#endif
-
-/* A trivial malloc implementation, adapted from
- *  malloc by Hannu Savolainen 1993 and Matthias Urlichs 1994
- */
-STATIC_RW_DATA unsigned long malloc_ptr;
-STATIC_RW_DATA int malloc_count;
-
-static void *malloc(int size)
-{
-	void *p;
-
-	if (size < 0)
-		return NULL;
-	if (!malloc_ptr)
-		malloc_ptr = free_mem_ptr;
-
-	malloc_ptr = (malloc_ptr + 3) & ~3;     /* Align */
-
-	p = (void *)malloc_ptr;
-	malloc_ptr += size;
-
-	if (free_mem_end_ptr && malloc_ptr >= free_mem_end_ptr)
-		return NULL;
-
-	malloc_count++;
-	return p;
-}
-
-static void free(void *where)
-{
-	malloc_count--;
-	if (!malloc_count)
-		malloc_ptr = free_mem_ptr;
-}
-
-#define large_malloc(a) malloc(a)
-#define large_free(a) free(a)
-
-#define INIT
-
-#else /* STATIC */
-
-/* Code active when compiled standalone for use when loading ramdisk: */
-
-#include <linux/kernel.h>
-#include <linux/fs.h>
-#include <linux/string.h>
-#include <linux/slab.h>
-#include <linux/vmalloc.h>
-
-/* Use defines rather than static inline in order to avoid spurious
- * warnings when not needed (indeed large_malloc / large_free are not
- * needed by inflate */
-
-#define malloc(a) kmalloc(a, GFP_KERNEL)
-#define free(a) kfree(a)
-
-#define large_malloc(a) vmalloc(a)
-#define large_free(a) vfree(a)
-
-#define INIT __init
-#define STATIC
-
-#include <linux/init.h>
-
-#endif /* STATIC */
-
-#endif /* DECOMPR_MM_H */
diff --git a/ANDROID_3.4.5/include/linux/decompress/unlz4.h b/ANDROID_3.4.5/include/linux/decompress/unlz4.h
deleted file mode 100755
index d5b68bf3..00000000
--- a/ANDROID_3.4.5/include/linux/decompress/unlz4.h
+++ /dev/null
@@ -1,10 +0,0 @@
-#ifndef DECOMPRESS_UNLZ4_H
-#define DECOMPRESS_UNLZ4_H
-
-int unlz4(unsigned char *inbuf, int len,
-	int(*fill)(void*, unsigned int),
-	int(*flush)(void*, unsigned int),
-	unsigned char *output,
-	int *pos,
-	void(*error)(char *x));
-#endif
diff --git a/ANDROID_3.4.5/include/linux/decompress/unlzma.h b/ANDROID_3.4.5/include/linux/decompress/unlzma.h
deleted file mode 100644
index 7796538f..00000000
--- a/ANDROID_3.4.5/include/linux/decompress/unlzma.h
+++ /dev/null
@@ -1,12 +0,0 @@
-#ifndef DECOMPRESS_UNLZMA_H
-#define DECOMPRESS_UNLZMA_H
-
-int unlzma(unsigned char *, int,
-	   int(*fill)(void*, unsigned int),
-	   int(*flush)(void*, unsigned int),
-	   unsigned char *output,
-	   int *posp,
-	   void(*error)(char *x)
-	);
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/decompress/unlzo.h b/ANDROID_3.4.5/include/linux/decompress/unlzo.h
deleted file mode 100644
index 98722975..00000000
--- a/ANDROID_3.4.5/include/linux/decompress/unlzo.h
+++ /dev/null
@@ -1,10 +0,0 @@
-#ifndef DECOMPRESS_UNLZO_H
-#define DECOMPRESS_UNLZO_H
-
-int unlzo(unsigned char *inbuf, int len,
-	int(*fill)(void*, unsigned int),
-	int(*flush)(void*, unsigned int),
-	unsigned char *output,
-	int *pos,
-	void(*error)(char *x));
-#endif
diff --git a/ANDROID_3.4.5/include/linux/decompress/unxz.h b/ANDROID_3.4.5/include/linux/decompress/unxz.h
deleted file mode 100644
index 41728fc6..00000000
--- a/ANDROID_3.4.5/include/linux/decompress/unxz.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * Wrapper for decompressing XZ-compressed kernel, initramfs, and initrd
- *
- * Author: Lasse Collin <lasse.collin@tukaani.org>
- *
- * This file has been put into the public domain.
- * You can do whatever you want with this file.
- */
-
-#ifndef DECOMPRESS_UNXZ_H
-#define DECOMPRESS_UNXZ_H
-
-int unxz(unsigned char *in, int in_size,
-	 int (*fill)(void *dest, unsigned int size),
-	 int (*flush)(void *src, unsigned int size),
-	 unsigned char *out, int *in_used,
-	 void (*error)(char *x));
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/delay.h b/ANDROID_3.4.5/include/linux/delay.h
deleted file mode 100644
index a6ecb34c..00000000
--- a/ANDROID_3.4.5/include/linux/delay.h
+++ /dev/null
@@ -1,55 +0,0 @@
-#ifndef _LINUX_DELAY_H
-#define _LINUX_DELAY_H
-
-/*
- * Copyright (C) 1993 Linus Torvalds
- *
- * Delay routines, using a pre-computed "loops_per_jiffy" value.
- */
-
-#include <linux/kernel.h>
-
-extern unsigned long loops_per_jiffy;
-
-#include <asm/delay.h>
-
-/*
- * Using udelay() for intervals greater than a few milliseconds can
- * risk overflow for high loops_per_jiffy (high bogomips) machines. The
- * mdelay() provides a wrapper to prevent this.  For delays greater
- * than MAX_UDELAY_MS milliseconds, the wrapper is used.  Architecture
- * specific values can be defined in asm-???/delay.h as an override.
- * The 2nd mdelay() definition ensures GCC will optimize away the 
- * while loop for the common cases where n <= MAX_UDELAY_MS  --  Paul G.
- */
-
-#ifndef MAX_UDELAY_MS
-#define MAX_UDELAY_MS	5
-#endif
-
-#ifndef mdelay
-#define mdelay(n) (\
-	(__builtin_constant_p(n) && (n)<=MAX_UDELAY_MS) ? udelay((n)*1000) : \
-	({unsigned long __ms=(n); while (__ms--) udelay(1000);}))
-#endif
-
-#ifndef ndelay
-static inline void ndelay(unsigned long x)
-{
-	udelay(DIV_ROUND_UP(x, 1000));
-}
-#define ndelay(x) ndelay(x)
-#endif
-
-extern unsigned long lpj_fine;
-void calibrate_delay(void);
-void msleep(unsigned int msecs);
-unsigned long msleep_interruptible(unsigned int msecs);
-void usleep_range(unsigned long min, unsigned long max);
-
-static inline void ssleep(unsigned int seconds)
-{
-	msleep(seconds * 1000);
-}
-
-#endif /* defined(_LINUX_DELAY_H) */
diff --git a/ANDROID_3.4.5/include/linux/delayacct.h b/ANDROID_3.4.5/include/linux/delayacct.h
deleted file mode 100644
index 6cee17c2..00000000
--- a/ANDROID_3.4.5/include/linux/delayacct.h
+++ /dev/null
@@ -1,153 +0,0 @@
-/* delayacct.h - per-task delay accounting
- *
- * Copyright (C) Shailabh Nagar, IBM Corp. 2006
- *
- * This program is free software;  you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY;  without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See
- * the GNU General Public License for more details.
- *
- */
-
-#ifndef _LINUX_DELAYACCT_H
-#define _LINUX_DELAYACCT_H
-
-#include <linux/sched.h>
-#include <linux/slab.h>
-
-/*
- * Per-task flags relevant to delay accounting
- * maintained privately to avoid exhausting similar flags in sched.h:PF_*
- * Used to set current->delays->flags
- */
-#define DELAYACCT_PF_SWAPIN	0x00000001	/* I am doing a swapin */
-#define DELAYACCT_PF_BLKIO	0x00000002	/* I am waiting on IO */
-
-#ifdef CONFIG_TASK_DELAY_ACCT
-
-extern int delayacct_on;	/* Delay accounting turned on/off */
-extern struct kmem_cache *delayacct_cache;
-extern void delayacct_init(void);
-extern void __delayacct_tsk_init(struct task_struct *);
-extern void __delayacct_tsk_exit(struct task_struct *);
-extern void __delayacct_blkio_start(void);
-extern void __delayacct_blkio_end(void);
-extern int __delayacct_add_tsk(struct taskstats *, struct task_struct *);
-extern __u64 __delayacct_blkio_ticks(struct task_struct *);
-extern void __delayacct_freepages_start(void);
-extern void __delayacct_freepages_end(void);
-
-static inline int delayacct_is_task_waiting_on_io(struct task_struct *p)
-{
-	if (p->delays)
-		return (p->delays->flags & DELAYACCT_PF_BLKIO);
-	else
-		return 0;
-}
-
-static inline void delayacct_set_flag(int flag)
-{
-	if (current->delays)
-		current->delays->flags |= flag;
-}
-
-static inline void delayacct_clear_flag(int flag)
-{
-	if (current->delays)
-		current->delays->flags &= ~flag;
-}
-
-static inline void delayacct_tsk_init(struct task_struct *tsk)
-{
-	/* reinitialize in case parent's non-null pointer was dup'ed*/
-	tsk->delays = NULL;
-	if (delayacct_on)
-		__delayacct_tsk_init(tsk);
-}
-
-/* Free tsk->delays. Called from bad fork and __put_task_struct
- * where there's no risk of tsk->delays being accessed elsewhere
- */
-static inline void delayacct_tsk_free(struct task_struct *tsk)
-{
-	if (tsk->delays)
-		kmem_cache_free(delayacct_cache, tsk->delays);
-	tsk->delays = NULL;
-}
-
-static inline void delayacct_blkio_start(void)
-{
-	delayacct_set_flag(DELAYACCT_PF_BLKIO);
-	if (current->delays)
-		__delayacct_blkio_start();
-}
-
-static inline void delayacct_blkio_end(void)
-{
-	if (current->delays)
-		__delayacct_blkio_end();
-	delayacct_clear_flag(DELAYACCT_PF_BLKIO);
-}
-
-static inline int delayacct_add_tsk(struct taskstats *d,
-					struct task_struct *tsk)
-{
-	if (!delayacct_on || !tsk->delays)
-		return 0;
-	return __delayacct_add_tsk(d, tsk);
-}
-
-static inline __u64 delayacct_blkio_ticks(struct task_struct *tsk)
-{
-	if (tsk->delays)
-		return __delayacct_blkio_ticks(tsk);
-	return 0;
-}
-
-static inline void delayacct_freepages_start(void)
-{
-	if (current->delays)
-		__delayacct_freepages_start();
-}
-
-static inline void delayacct_freepages_end(void)
-{
-	if (current->delays)
-		__delayacct_freepages_end();
-}
-
-#else
-static inline void delayacct_set_flag(int flag)
-{}
-static inline void delayacct_clear_flag(int flag)
-{}
-static inline void delayacct_init(void)
-{}
-static inline void delayacct_tsk_init(struct task_struct *tsk)
-{}
-static inline void delayacct_tsk_free(struct task_struct *tsk)
-{}
-static inline void delayacct_blkio_start(void)
-{}
-static inline void delayacct_blkio_end(void)
-{}
-static inline int delayacct_add_tsk(struct taskstats *d,
-					struct task_struct *tsk)
-{ return 0; }
-static inline __u64 delayacct_blkio_ticks(struct task_struct *tsk)
-{ return 0; }
-static inline int delayacct_is_task_waiting_on_io(struct task_struct *p)
-{ return 0; }
-static inline void delayacct_freepages_start(void)
-{}
-static inline void delayacct_freepages_end(void)
-{}
-
-#endif /* CONFIG_TASK_DELAY_ACCT */
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/devfreq.h b/ANDROID_3.4.5/include/linux/devfreq.h
deleted file mode 100644
index 281c72a3..00000000
--- a/ANDROID_3.4.5/include/linux/devfreq.h
+++ /dev/null
@@ -1,253 +0,0 @@
-/*
- * devfreq: Generic Dynamic Voltage and Frequency Scaling (DVFS) Framework
- *	    for Non-CPU Devices.
- *
- * Copyright (C) 2011 Samsung Electronics
- *	MyungJoo Ham <myungjoo.ham@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __LINUX_DEVFREQ_H__
-#define __LINUX_DEVFREQ_H__
-
-#include <linux/device.h>
-#include <linux/notifier.h>
-#include <linux/opp.h>
-
-#define DEVFREQ_NAME_LEN 16
-
-struct devfreq;
-
-/**
- * struct devfreq_dev_status - Data given from devfreq user device to
- *			     governors. Represents the performance
- *			     statistics.
- * @total_time		The total time represented by this instance of
- *			devfreq_dev_status
- * @busy_time		The time that the device was working among the
- *			total_time.
- * @current_frequency	The operating frequency.
- * @private_data	An entry not specified by the devfreq framework.
- *			A device and a specific governor may have their
- *			own protocol with private_data. However, because
- *			this is governor-specific, a governor using this
- *			will be only compatible with devices aware of it.
- */
-struct devfreq_dev_status {
-	/* both since the last measure */
-	unsigned long total_time;
-	unsigned long busy_time;
-	unsigned long current_frequency;
-	void *private_data;
-};
-
-/*
- * The resulting frequency should be at most this. (this bound is the
- * least upper bound; thus, the resulting freq should be lower or same)
- * If the flag is not set, the resulting frequency should be at most the
- * bound (greatest lower bound)
- */
-#define DEVFREQ_FLAG_LEAST_UPPER_BOUND		0x1
-
-/**
- * struct devfreq_dev_profile - Devfreq's user device profile
- * @initial_freq	The operating frequency when devfreq_add_device() is
- *			called.
- * @polling_ms		The polling interval in ms. 0 disables polling.
- * @target		The device should set its operating frequency at
- *			freq or lowest-upper-than-freq value. If freq is
- *			higher than any operable frequency, set maximum.
- *			Before returning, target function should set
- *			freq at the current frequency.
- *			The "flags" parameter's possible values are
- *			explained above with "DEVFREQ_FLAG_*" macros.
- * @get_dev_status	The device should provide the current performance
- *			status to devfreq, which is used by governors.
- * @exit		An optional callback that is called when devfreq
- *			is removing the devfreq object due to error or
- *			from devfreq_remove_device() call. If the user
- *			has registered devfreq->nb at a notifier-head,
- *			this is the time to unregister it.
- */
-struct devfreq_dev_profile {
-	unsigned long initial_freq;
-	unsigned int polling_ms;
-
-	int (*target)(struct device *dev, unsigned long *freq, u32 flags);
-	int (*get_dev_status)(struct device *dev,
-			      struct devfreq_dev_status *stat);
-	void (*exit)(struct device *dev);
-};
-
-/**
- * struct devfreq_governor - Devfreq policy governor
- * @name		Governor's name
- * @get_target_freq	Returns desired operating frequency for the device.
- *			Basically, get_target_freq will run
- *			devfreq_dev_profile.get_dev_status() to get the
- *			status of the device (load = busy_time / total_time).
- *			If no_central_polling is set, this callback is called
- *			only with update_devfreq() notified by OPP.
- * @init		Called when the devfreq is being attached to a device
- * @exit		Called when the devfreq is being removed from a
- *			device. Governor should stop any internal routines
- *			before return because related data may be
- *			freed after exit().
- * @no_central_polling	Do not use devfreq's central polling mechanism.
- *			When this is set, devfreq will not call
- *			get_target_freq with devfreq_monitor(). However,
- *			devfreq will call get_target_freq with
- *			devfreq_update() notified by OPP framework.
- *
- * Note that the callbacks are called with devfreq->lock locked by devfreq.
- */
-struct devfreq_governor {
-	const char name[DEVFREQ_NAME_LEN];
-	int (*get_target_freq)(struct devfreq *this, unsigned long *freq);
-	int (*init)(struct devfreq *this);
-	void (*exit)(struct devfreq *this);
-	const bool no_central_polling;
-};
-
-/**
- * struct devfreq - Device devfreq structure
- * @node	list node - contains the devices with devfreq that have been
- *		registered.
- * @lock	a mutex to protect accessing devfreq.
- * @dev		device registered by devfreq class. dev.parent is the device
- *		using devfreq.
- * @profile	device-specific devfreq profile
- * @governor	method how to choose frequency based on the usage.
- * @nb		notifier block used to notify devfreq object that it should
- *		reevaluate operable frequencies. Devfreq users may use
- *		devfreq.nb to the corresponding register notifier call chain.
- * @polling_jiffies	interval in jiffies.
- * @previous_freq	previously configured frequency value.
- * @next_polling	the number of remaining jiffies to poll with
- *			"devfreq_monitor" executions to reevaluate
- *			frequency/voltage of the device. Set by
- *			profile's polling_ms interval.
- * @data	Private data of the governor. The devfreq framework does not
- *		touch this.
- * @being_removed	a flag to mark that this object is being removed in
- *			order to prevent trying to remove the object multiple times.
- * @min_freq	Limit minimum frequency requested by user (0: none)
- * @max_freq	Limit maximum frequency requested by user (0: none)
- *
- * This structure stores the devfreq information for a give device.
- *
- * Note that when a governor accesses entries in struct devfreq in its
- * functions except for the context of callbacks defined in struct
- * devfreq_governor, the governor should protect its access with the
- * struct mutex lock in struct devfreq. A governor may use this mutex
- * to protect its own private data in void *data as well.
- */
-struct devfreq {
-	struct list_head node;
-
-	struct mutex lock;
-	struct device dev;
-	struct devfreq_dev_profile *profile;
-	const struct devfreq_governor *governor;
-	struct notifier_block nb;
-
-	unsigned long polling_jiffies;
-	unsigned long previous_freq;
-	unsigned int next_polling;
-
-	void *data; /* private data for governors */
-
-	bool being_removed;
-
-	unsigned long min_freq;
-	unsigned long max_freq;
-};
-
-#if defined(CONFIG_PM_DEVFREQ)
-extern struct devfreq *devfreq_add_device(struct device *dev,
-				  struct devfreq_dev_profile *profile,
-				  const struct devfreq_governor *governor,
-				  void *data);
-extern int devfreq_remove_device(struct devfreq *devfreq);
-
-/* Helper functions for devfreq user device driver with OPP. */
-extern struct opp *devfreq_recommended_opp(struct device *dev,
-					   unsigned long *freq, u32 flags);
-extern int devfreq_register_opp_notifier(struct device *dev,
-					 struct devfreq *devfreq);
-extern int devfreq_unregister_opp_notifier(struct device *dev,
-					   struct devfreq *devfreq);
-
-#ifdef CONFIG_DEVFREQ_GOV_POWERSAVE
-extern const struct devfreq_governor devfreq_powersave;
-#endif
-#ifdef CONFIG_DEVFREQ_GOV_PERFORMANCE
-extern const struct devfreq_governor devfreq_performance;
-#endif
-#ifdef CONFIG_DEVFREQ_GOV_USERSPACE
-extern const struct devfreq_governor devfreq_userspace;
-#endif
-#ifdef CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND
-extern const struct devfreq_governor devfreq_simple_ondemand;
-/**
- * struct devfreq_simple_ondemand_data - void *data fed to struct devfreq
- *	and devfreq_add_device
- * @ upthreshold	If the load is over this value, the frequency jumps.
- *			Specify 0 to use the default. Valid value = 0 to 100.
- * @ downdifferential	If the load is under upthreshold - downdifferential,
- *			the governor may consider slowing the frequency down.
- *			Specify 0 to use the default. Valid value = 0 to 100.
- *			downdifferential < upthreshold must hold.
- *
- * If the fed devfreq_simple_ondemand_data pointer is NULL to the governor,
- * the governor uses the default values.
- */
-struct devfreq_simple_ondemand_data {
-	unsigned int upthreshold;
-	unsigned int downdifferential;
-};
-#endif
-
-#else /* !CONFIG_PM_DEVFREQ */
-static struct devfreq *devfreq_add_device(struct device *dev,
-					  struct devfreq_dev_profile *profile,
-					  struct devfreq_governor *governor,
-					  void *data)
-{
-	return NULL;
-}
-
-static int devfreq_remove_device(struct devfreq *devfreq)
-{
-	return 0;
-}
-
-static struct opp *devfreq_recommended_opp(struct device *dev,
-					   unsigned long *freq, u32 flags)
-{
-	return -EINVAL;
-}
-
-static int devfreq_register_opp_notifier(struct device *dev,
-					 struct devfreq *devfreq)
-{
-	return -EINVAL;
-}
-
-static int devfreq_unregister_opp_notifier(struct device *dev,
-					   struct devfreq *devfreq)
-{
-	return -EINVAL;
-}
-
-#define devfreq_powersave	NULL
-#define devfreq_performance	NULL
-#define devfreq_userspace	NULL
-#define devfreq_simple_ondemand	NULL
-
-#endif /* CONFIG_PM_DEVFREQ */
-
-#endif /* __LINUX_DEVFREQ_H__ */
diff --git a/ANDROID_3.4.5/include/linux/device-mapper.h b/ANDROID_3.4.5/include/linux/device-mapper.h
deleted file mode 100644
index 98f34b88..00000000
--- a/ANDROID_3.4.5/include/linux/device-mapper.h
+++ /dev/null
@@ -1,514 +0,0 @@
-/*
- * Copyright (C) 2001 Sistina Software (UK) Limited.
- * Copyright (C) 2004-2008 Red Hat, Inc. All rights reserved.
- *
- * This file is released under the LGPL.
- */
-
-#ifndef _LINUX_DEVICE_MAPPER_H
-#define _LINUX_DEVICE_MAPPER_H
-
-#include <linux/bio.h>
-#include <linux/blkdev.h>
-#include <linux/ratelimit.h>
-
-struct dm_dev;
-struct dm_target;
-struct dm_table;
-struct mapped_device;
-struct bio_vec;
-
-typedef enum { STATUSTYPE_INFO, STATUSTYPE_TABLE } status_type_t;
-
-union map_info {
-	void *ptr;
-	unsigned long long ll;
-	unsigned target_request_nr;
-};
-
-/*
- * In the constructor the target parameter will already have the
- * table, type, begin and len fields filled in.
- */
-typedef int (*dm_ctr_fn) (struct dm_target *target,
-			  unsigned int argc, char **argv);
-
-/*
- * The destructor doesn't need to free the dm_target, just
- * anything hidden ti->private.
- */
-typedef void (*dm_dtr_fn) (struct dm_target *ti);
-
-/*
- * The map function must return:
- * < 0: error
- * = 0: The target will handle the io by resubmitting it later
- * = 1: simple remap complete
- * = 2: The target wants to push back the io
- */
-typedef int (*dm_map_fn) (struct dm_target *ti, struct bio *bio,
-			  union map_info *map_context);
-typedef int (*dm_map_request_fn) (struct dm_target *ti, struct request *clone,
-				  union map_info *map_context);
-
-/*
- * Returns:
- * < 0 : error (currently ignored)
- * 0   : ended successfully
- * 1   : for some reason the io has still not completed (eg,
- *       multipath target might want to requeue a failed io).
- * 2   : The target wants to push back the io
- */
-typedef int (*dm_endio_fn) (struct dm_target *ti,
-			    struct bio *bio, int error,
-			    union map_info *map_context);
-typedef int (*dm_request_endio_fn) (struct dm_target *ti,
-				    struct request *clone, int error,
-				    union map_info *map_context);
-
-typedef void (*dm_flush_fn) (struct dm_target *ti);
-typedef void (*dm_presuspend_fn) (struct dm_target *ti);
-typedef void (*dm_postsuspend_fn) (struct dm_target *ti);
-typedef int (*dm_preresume_fn) (struct dm_target *ti);
-typedef void (*dm_resume_fn) (struct dm_target *ti);
-
-typedef int (*dm_status_fn) (struct dm_target *ti, status_type_t status_type,
-			     char *result, unsigned int maxlen);
-
-typedef int (*dm_message_fn) (struct dm_target *ti, unsigned argc, char **argv);
-
-typedef int (*dm_ioctl_fn) (struct dm_target *ti, unsigned int cmd,
-			    unsigned long arg);
-
-typedef int (*dm_merge_fn) (struct dm_target *ti, struct bvec_merge_data *bvm,
-			    struct bio_vec *biovec, int max_size);
-
-typedef int (*iterate_devices_callout_fn) (struct dm_target *ti,
-					   struct dm_dev *dev,
-					   sector_t start, sector_t len,
-					   void *data);
-
-typedef int (*dm_iterate_devices_fn) (struct dm_target *ti,
-				      iterate_devices_callout_fn fn,
-				      void *data);
-
-typedef void (*dm_io_hints_fn) (struct dm_target *ti,
-				struct queue_limits *limits);
-
-/*
- * Returns:
- *    0: The target can handle the next I/O immediately.
- *    1: The target can't handle the next I/O immediately.
- */
-typedef int (*dm_busy_fn) (struct dm_target *ti);
-
-void dm_error(const char *message);
-
-/*
- * Combine device limits.
- */
-int dm_set_device_limits(struct dm_target *ti, struct dm_dev *dev,
-			 sector_t start, sector_t len, void *data);
-
-struct dm_dev {
-	struct block_device *bdev;
-	fmode_t mode;
-	char name[16];
-};
-
-/*
- * Constructors should call these functions to ensure destination devices
- * are opened/closed correctly.
- */
-int dm_get_device(struct dm_target *ti, const char *path, fmode_t mode,
-						 struct dm_dev **result);
-void dm_put_device(struct dm_target *ti, struct dm_dev *d);
-
-/*
- * Information about a target type
- */
-
-struct target_type {
-	uint64_t features;
-	const char *name;
-	struct module *module;
-	unsigned version[3];
-	dm_ctr_fn ctr;
-	dm_dtr_fn dtr;
-	dm_map_fn map;
-	dm_map_request_fn map_rq;
-	dm_endio_fn end_io;
-	dm_request_endio_fn rq_end_io;
-	dm_flush_fn flush;
-	dm_presuspend_fn presuspend;
-	dm_postsuspend_fn postsuspend;
-	dm_preresume_fn preresume;
-	dm_resume_fn resume;
-	dm_status_fn status;
-	dm_message_fn message;
-	dm_ioctl_fn ioctl;
-	dm_merge_fn merge;
-	dm_busy_fn busy;
-	dm_iterate_devices_fn iterate_devices;
-	dm_io_hints_fn io_hints;
-
-	/* For internal device-mapper use. */
-	struct list_head list;
-};
-
-/*
- * Target features
- */
-
-/*
- * Any table that contains an instance of this target must have only one.
- */
-#define DM_TARGET_SINGLETON		0x00000001
-#define dm_target_needs_singleton(type)	((type)->features & DM_TARGET_SINGLETON)
-
-/*
- * Indicates that a target does not support read-only devices.
- */
-#define DM_TARGET_ALWAYS_WRITEABLE	0x00000002
-#define dm_target_always_writeable(type) \
-		((type)->features & DM_TARGET_ALWAYS_WRITEABLE)
-
-/*
- * Any device that contains a table with an instance of this target may never
- * have tables containing any different target type.
- */
-#define DM_TARGET_IMMUTABLE		0x00000004
-#define dm_target_is_immutable(type)	((type)->features & DM_TARGET_IMMUTABLE)
-
-struct dm_target {
-	struct dm_table *table;
-	struct target_type *type;
-
-	/* target limits */
-	sector_t begin;
-	sector_t len;
-
-	/* Always a power of 2 */
-	sector_t split_io;
-
-	/*
-	 * A number of zero-length barrier requests that will be submitted
-	 * to the target for the purpose of flushing cache.
-	 *
-	 * The request number will be placed in union map_info->target_request_nr.
-	 * It is a responsibility of the target driver to remap these requests
-	 * to the real underlying devices.
-	 */
-	unsigned num_flush_requests;
-
-	/*
-	 * The number of discard requests that will be submitted to the
-	 * target.  map_info->request_nr is used just like num_flush_requests.
-	 */
-	unsigned num_discard_requests;
-
-	/* target specific data */
-	void *private;
-
-	/* Used to provide an error string from the ctr */
-	char *error;
-
-	/*
-	 * Set if this target needs to receive discards regardless of
-	 * whether or not its underlying devices have support.
-	 */
-	unsigned discards_supported:1;
-
-	/*
-	 * Set if this target does not return zeroes on discarded blocks.
-	 */
-	unsigned discard_zeroes_data_unsupported:1;
-};
-
-/* Each target can link one of these into the table */
-struct dm_target_callbacks {
-	struct list_head list;
-	int (*congested_fn) (struct dm_target_callbacks *, int);
-};
-
-int dm_register_target(struct target_type *t);
-void dm_unregister_target(struct target_type *t);
-
-/*
- * Target argument parsing.
- */
-struct dm_arg_set {
-	unsigned argc;
-	char **argv;
-};
-
-/*
- * The minimum and maximum value of a numeric argument, together with
- * the error message to use if the number is found to be outside that range.
- */
-struct dm_arg {
-	unsigned min;
-	unsigned max;
-	char *error;
-};
-
-/*
- * Validate the next argument, either returning it as *value or, if invalid,
- * returning -EINVAL and setting *error.
- */
-int dm_read_arg(struct dm_arg *arg, struct dm_arg_set *arg_set,
-		unsigned *value, char **error);
-
-/*
- * Process the next argument as the start of a group containing between
- * arg->min and arg->max further arguments. Either return the size as
- * *num_args or, if invalid, return -EINVAL and set *error.
- */
-int dm_read_arg_group(struct dm_arg *arg, struct dm_arg_set *arg_set,
-		      unsigned *num_args, char **error);
-
-/*
- * Return the current argument and shift to the next.
- */
-const char *dm_shift_arg(struct dm_arg_set *as);
-
-/*
- * Move through num_args arguments.
- */
-void dm_consume_args(struct dm_arg_set *as, unsigned num_args);
-
-/*-----------------------------------------------------------------
- * Functions for creating and manipulating mapped devices.
- * Drop the reference with dm_put when you finish with the object.
- *---------------------------------------------------------------*/
-
-/*
- * DM_ANY_MINOR chooses the next available minor number.
- */
-#define DM_ANY_MINOR (-1)
-int dm_create(int minor, struct mapped_device **md);
-
-/*
- * Reference counting for md.
- */
-struct mapped_device *dm_get_md(dev_t dev);
-void dm_get(struct mapped_device *md);
-void dm_put(struct mapped_device *md);
-
-/*
- * An arbitrary pointer may be stored alongside a mapped device.
- */
-void dm_set_mdptr(struct mapped_device *md, void *ptr);
-void *dm_get_mdptr(struct mapped_device *md);
-
-/*
- * A device can still be used while suspended, but I/O is deferred.
- */
-int dm_suspend(struct mapped_device *md, unsigned suspend_flags);
-int dm_resume(struct mapped_device *md);
-
-/*
- * Event functions.
- */
-uint32_t dm_get_event_nr(struct mapped_device *md);
-int dm_wait_event(struct mapped_device *md, int event_nr);
-uint32_t dm_next_uevent_seq(struct mapped_device *md);
-void dm_uevent_add(struct mapped_device *md, struct list_head *elist);
-
-/*
- * Info functions.
- */
-const char *dm_device_name(struct mapped_device *md);
-int dm_copy_name_and_uuid(struct mapped_device *md, char *name, char *uuid);
-struct gendisk *dm_disk(struct mapped_device *md);
-int dm_suspended(struct dm_target *ti);
-int dm_noflush_suspending(struct dm_target *ti);
-union map_info *dm_get_mapinfo(struct bio *bio);
-union map_info *dm_get_rq_mapinfo(struct request *rq);
-
-/*
- * Geometry functions.
- */
-int dm_get_geometry(struct mapped_device *md, struct hd_geometry *geo);
-int dm_set_geometry(struct mapped_device *md, struct hd_geometry *geo);
-
-
-/*-----------------------------------------------------------------
- * Functions for manipulating device-mapper tables.
- *---------------------------------------------------------------*/
-
-/*
- * First create an empty table.
- */
-int dm_table_create(struct dm_table **result, fmode_t mode,
-		    unsigned num_targets, struct mapped_device *md);
-
-/*
- * Then call this once for each target.
- */
-int dm_table_add_target(struct dm_table *t, const char *type,
-			sector_t start, sector_t len, char *params);
-
-/*
- * Target_ctr should call this if it needs to add any callbacks.
- */
-void dm_table_add_target_callbacks(struct dm_table *t, struct dm_target_callbacks *cb);
-
-/*
- * Finally call this to make the table ready for use.
- */
-int dm_table_complete(struct dm_table *t);
-
-/*
- * Table reference counting.
- */
-struct dm_table *dm_get_live_table(struct mapped_device *md);
-void dm_table_get(struct dm_table *t);
-void dm_table_put(struct dm_table *t);
-
-/*
- * Queries
- */
-sector_t dm_table_get_size(struct dm_table *t);
-unsigned int dm_table_get_num_targets(struct dm_table *t);
-fmode_t dm_table_get_mode(struct dm_table *t);
-struct mapped_device *dm_table_get_md(struct dm_table *t);
-
-/*
- * Trigger an event.
- */
-void dm_table_event(struct dm_table *t);
-
-/*
- * The device must be suspended before calling this method.
- * Returns the previous table, which the caller must destroy.
- */
-struct dm_table *dm_swap_table(struct mapped_device *md,
-			       struct dm_table *t);
-
-/*
- * A wrapper around vmalloc.
- */
-void *dm_vcalloc(unsigned long nmemb, unsigned long elem_size);
-
-/*-----------------------------------------------------------------
- * Macros.
- *---------------------------------------------------------------*/
-#define DM_NAME "device-mapper"
-
-#ifdef CONFIG_PRINTK
-extern struct ratelimit_state dm_ratelimit_state;
-
-#define dm_ratelimit()	__ratelimit(&dm_ratelimit_state)
-#else
-#define dm_ratelimit()	0
-#endif
-
-#define DMCRIT(f, arg...) \
-	printk(KERN_CRIT DM_NAME ": " DM_MSG_PREFIX ": " f "\n", ## arg)
-
-#define DMERR(f, arg...) \
-	printk(KERN_ERR DM_NAME ": " DM_MSG_PREFIX ": " f "\n", ## arg)
-#define DMERR_LIMIT(f, arg...) \
-	do { \
-		if (dm_ratelimit())	\
-			printk(KERN_ERR DM_NAME ": " DM_MSG_PREFIX ": " \
-			       f "\n", ## arg); \
-	} while (0)
-
-#define DMWARN(f, arg...) \
-	printk(KERN_WARNING DM_NAME ": " DM_MSG_PREFIX ": " f "\n", ## arg)
-#define DMWARN_LIMIT(f, arg...) \
-	do { \
-		if (dm_ratelimit())	\
-			printk(KERN_WARNING DM_NAME ": " DM_MSG_PREFIX ": " \
-			       f "\n", ## arg); \
-	} while (0)
-
-#define DMINFO(f, arg...) \
-	printk(KERN_INFO DM_NAME ": " DM_MSG_PREFIX ": " f "\n", ## arg)
-#define DMINFO_LIMIT(f, arg...) \
-	do { \
-		if (dm_ratelimit())	\
-			printk(KERN_INFO DM_NAME ": " DM_MSG_PREFIX ": " f \
-			       "\n", ## arg); \
-	} while (0)
-
-#ifdef CONFIG_DM_DEBUG
-#  define DMDEBUG(f, arg...) \
-	printk(KERN_DEBUG DM_NAME ": " DM_MSG_PREFIX " DEBUG: " f "\n", ## arg)
-#  define DMDEBUG_LIMIT(f, arg...) \
-	do { \
-		if (dm_ratelimit())	\
-			printk(KERN_DEBUG DM_NAME ": " DM_MSG_PREFIX ": " f \
-			       "\n", ## arg); \
-	} while (0)
-#else
-#  define DMDEBUG(f, arg...) do {} while (0)
-#  define DMDEBUG_LIMIT(f, arg...) do {} while (0)
-#endif
-
-#define DMEMIT(x...) sz += ((sz >= maxlen) ? \
-			  0 : scnprintf(result + sz, maxlen - sz, x))
-
-#define SECTOR_SHIFT 9
-
-/*
- * Definitions of return values from target end_io function.
- */
-#define DM_ENDIO_INCOMPLETE	1
-#define DM_ENDIO_REQUEUE	2
-
-/*
- * Definitions of return values from target map function.
- */
-#define DM_MAPIO_SUBMITTED	0
-#define DM_MAPIO_REMAPPED	1
-#define DM_MAPIO_REQUEUE	DM_ENDIO_REQUEUE
-
-/*
- * Ceiling(n / sz)
- */
-#define dm_div_up(n, sz) (((n) + (sz) - 1) / (sz))
-
-#define dm_sector_div_up(n, sz) ( \
-{ \
-	sector_t _r = ((n) + (sz) - 1); \
-	sector_div(_r, (sz)); \
-	_r; \
-} \
-)
-
-/*
- * ceiling(n / size) * size
- */
-#define dm_round_up(n, sz) (dm_div_up((n), (sz)) * (sz))
-
-#define dm_array_too_big(fixed, obj, num) \
-	((num) > (UINT_MAX - (fixed)) / (obj))
-
-/*
- * Sector offset taken relative to the start of the target instead of
- * relative to the start of the device.
- */
-#define dm_target_offset(ti, sector) ((sector) - (ti)->begin)
-
-static inline sector_t to_sector(unsigned long n)
-{
-	return (n >> SECTOR_SHIFT);
-}
-
-static inline unsigned long to_bytes(sector_t n)
-{
-	return (n << SECTOR_SHIFT);
-}
-
-/*-----------------------------------------------------------------
- * Helper for block layer and dm core operations
- *---------------------------------------------------------------*/
-void dm_dispatch_request(struct request *rq);
-void dm_requeue_unmapped_request(struct request *rq);
-void dm_kill_unmapped_request(struct request *rq, int error);
-int dm_underlying_device_busy(struct request_queue *q);
-
-#endif	/* _LINUX_DEVICE_MAPPER_H */
diff --git a/ANDROID_3.4.5/include/linux/device.h b/ANDROID_3.4.5/include/linux/device.h
deleted file mode 100644
index 5ad17ccc..00000000
--- a/ANDROID_3.4.5/include/linux/device.h
+++ /dev/null
@@ -1,1021 +0,0 @@
-/*
- * device.h - generic, centralized driver model
- *
- * Copyright (c) 2001-2003 Patrick Mochel <mochel@osdl.org>
- * Copyright (c) 2004-2009 Greg Kroah-Hartman <gregkh@suse.de>
- * Copyright (c) 2008-2009 Novell Inc.
- *
- * This file is released under the GPLv2
- *
- * See Documentation/driver-model/ for more information.
- */
-
-#ifndef _DEVICE_H_
-#define _DEVICE_H_
-
-#include <linux/ioport.h>
-#include <linux/kobject.h>
-#include <linux/klist.h>
-#include <linux/list.h>
-#include <linux/lockdep.h>
-#include <linux/compiler.h>
-#include <linux/types.h>
-#include <linux/mutex.h>
-#include <linux/pm.h>
-#include <linux/atomic.h>
-#include <asm/device.h>
-
-struct device;
-struct device_private;
-struct device_driver;
-struct driver_private;
-struct module;
-struct class;
-struct subsys_private;
-struct bus_type;
-struct device_node;
-struct iommu_ops;
-
-struct bus_attribute {
-	struct attribute	attr;
-	ssize_t (*show)(struct bus_type *bus, char *buf);
-	ssize_t (*store)(struct bus_type *bus, const char *buf, size_t count);
-};
-
-#define BUS_ATTR(_name, _mode, _show, _store)	\
-struct bus_attribute bus_attr_##_name = __ATTR(_name, _mode, _show, _store)
-
-extern int __must_check bus_create_file(struct bus_type *,
-					struct bus_attribute *);
-extern void bus_remove_file(struct bus_type *, struct bus_attribute *);
-
-/**
- * struct bus_type - The bus type of the device
- *
- * @name:	The name of the bus.
- * @dev_name:	Used for subsystems to enumerate devices like ("foo%u", dev->id).
- * @dev_root:	Default device to use as the parent.
- * @bus_attrs:	Default attributes of the bus.
- * @dev_attrs:	Default attributes of the devices on the bus.
- * @drv_attrs:	Default attributes of the device drivers on the bus.
- * @match:	Called, perhaps multiple times, whenever a new device or driver
- *		is added for this bus. It should return a nonzero value if the
- *		given device can be handled by the given driver.
- * @uevent:	Called when a device is added, removed, or a few other things
- *		that generate uevents to add the environment variables.
- * @probe:	Called when a new device or driver add to this bus, and callback
- *		the specific driver's probe to initial the matched device.
- * @remove:	Called when a device removed from this bus.
- * @shutdown:	Called at shut-down time to quiesce the device.
- * @suspend:	Called when a device on this bus wants to go to sleep mode.
- * @resume:	Called to bring a device on this bus out of sleep mode.
- * @pm:		Power management operations of this bus, callback the specific
- *		device driver's pm-ops.
- * @iommu_ops:  IOMMU specific operations for this bus, used to attach IOMMU
- *              driver implementations to a bus and allow the driver to do
- *              bus-specific setup
- * @p:		The private data of the driver core, only the driver core can
- *		touch this.
- *
- * A bus is a channel between the processor and one or more devices. For the
- * purposes of the device model, all devices are connected via a bus, even if
- * it is an internal, virtual, "platform" bus. Buses can plug into each other.
- * A USB controller is usually a PCI device, for example. The device model
- * represents the actual connections between buses and the devices they control.
- * A bus is represented by the bus_type structure. It contains the name, the
- * default attributes, the bus' methods, PM operations, and the driver core's
- * private data.
- */
-struct bus_type {
-	const char		*name;
-	const char		*dev_name;
-	struct device		*dev_root;
-	struct bus_attribute	*bus_attrs;
-	struct device_attribute	*dev_attrs;
-	struct driver_attribute	*drv_attrs;
-
-	int (*match)(struct device *dev, struct device_driver *drv);
-	int (*uevent)(struct device *dev, struct kobj_uevent_env *env);
-	int (*probe)(struct device *dev);
-	int (*remove)(struct device *dev);
-	void (*shutdown)(struct device *dev);
-
-	int (*suspend)(struct device *dev, pm_message_t state);
-	int (*resume)(struct device *dev);
-
-	const struct dev_pm_ops *pm;
-
-	struct iommu_ops *iommu_ops;
-
-	struct subsys_private *p;
-};
-
-/* This is a #define to keep the compiler from merging different
- * instances of the __key variable */
-#define bus_register(subsys)			\
-({						\
-	static struct lock_class_key __key;	\
-	__bus_register(subsys, &__key);	\
-})
-extern int __must_check __bus_register(struct bus_type *bus,
-				       struct lock_class_key *key);
-extern void bus_unregister(struct bus_type *bus);
-
-extern int __must_check bus_rescan_devices(struct bus_type *bus);
-
-/* iterator helpers for buses */
-struct subsys_dev_iter {
-	struct klist_iter		ki;
-	const struct device_type	*type;
-};
-void subsys_dev_iter_init(struct subsys_dev_iter *iter,
-			 struct bus_type *subsys,
-			 struct device *start,
-			 const struct device_type *type);
-struct device *subsys_dev_iter_next(struct subsys_dev_iter *iter);
-void subsys_dev_iter_exit(struct subsys_dev_iter *iter);
-
-int bus_for_each_dev(struct bus_type *bus, struct device *start, void *data,
-		     int (*fn)(struct device *dev, void *data));
-struct device *bus_find_device(struct bus_type *bus, struct device *start,
-			       void *data,
-			       int (*match)(struct device *dev, void *data));
-struct device *bus_find_device_by_name(struct bus_type *bus,
-				       struct device *start,
-				       const char *name);
-struct device *subsys_find_device_by_id(struct bus_type *bus, unsigned int id,
-					struct device *hint);
-int bus_for_each_drv(struct bus_type *bus, struct device_driver *start,
-		     void *data, int (*fn)(struct device_driver *, void *));
-void bus_sort_breadthfirst(struct bus_type *bus,
-			   int (*compare)(const struct device *a,
-					  const struct device *b));
-/*
- * Bus notifiers: Get notified of addition/removal of devices
- * and binding/unbinding of drivers to devices.
- * In the long run, it should be a replacement for the platform
- * notify hooks.
- */
-struct notifier_block;
-
-extern int bus_register_notifier(struct bus_type *bus,
-				 struct notifier_block *nb);
-extern int bus_unregister_notifier(struct bus_type *bus,
-				   struct notifier_block *nb);
-
-/* All 4 notifers below get called with the target struct device *
- * as an argument. Note that those functions are likely to be called
- * with the device lock held in the core, so be careful.
- */
-#define BUS_NOTIFY_ADD_DEVICE		0x00000001 /* device added */
-#define BUS_NOTIFY_DEL_DEVICE		0x00000002 /* device removed */
-#define BUS_NOTIFY_BIND_DRIVER		0x00000003 /* driver about to be
-						      bound */
-#define BUS_NOTIFY_BOUND_DRIVER		0x00000004 /* driver bound to device */
-#define BUS_NOTIFY_UNBIND_DRIVER	0x00000005 /* driver about to be
-						      unbound */
-#define BUS_NOTIFY_UNBOUND_DRIVER	0x00000006 /* driver is unbound
-						      from the device */
-
-extern struct kset *bus_get_kset(struct bus_type *bus);
-extern struct klist *bus_get_device_klist(struct bus_type *bus);
-
-/**
- * struct device_driver - The basic device driver structure
- * @name:	Name of the device driver.
- * @bus:	The bus which the device of this driver belongs to.
- * @owner:	The module owner.
- * @mod_name:	Used for built-in modules.
- * @suppress_bind_attrs: Disables bind/unbind via sysfs.
- * @of_match_table: The open firmware table.
- * @probe:	Called to query the existence of a specific device,
- *		whether this driver can work with it, and bind the driver
- *		to a specific device.
- * @remove:	Called when the device is removed from the system to
- *		unbind a device from this driver.
- * @shutdown:	Called at shut-down time to quiesce the device.
- * @suspend:	Called to put the device to sleep mode. Usually to a
- *		low power state.
- * @resume:	Called to bring a device from sleep mode.
- * @groups:	Default attributes that get created by the driver core
- *		automatically.
- * @pm:		Power management operations of the device which matched
- *		this driver.
- * @p:		Driver core's private data, no one other than the driver
- *		core can touch this.
- *
- * The device driver-model tracks all of the drivers known to the system.
- * The main reason for this tracking is to enable the driver core to match
- * up drivers with new devices. Once drivers are known objects within the
- * system, however, a number of other things become possible. Device drivers
- * can export information and configuration variables that are independent
- * of any specific device.
- */
-struct device_driver {
-	const char		*name;
-	struct bus_type		*bus;
-
-	struct module		*owner;
-	const char		*mod_name;	/* used for built-in modules */
-
-	bool suppress_bind_attrs;	/* disables bind/unbind via sysfs */
-
-	const struct of_device_id	*of_match_table;
-
-	int (*probe) (struct device *dev);
-	int (*remove) (struct device *dev);
-	void (*shutdown) (struct device *dev);
-	int (*suspend) (struct device *dev, pm_message_t state);
-	int (*resume) (struct device *dev);
-	const struct attribute_group **groups;
-
-	const struct dev_pm_ops *pm;
-
-	struct driver_private *p;
-};
-
-
-extern int __must_check driver_register(struct device_driver *drv);
-extern void driver_unregister(struct device_driver *drv);
-
-extern struct device_driver *driver_find(const char *name,
-					 struct bus_type *bus);
-extern int driver_probe_done(void);
-extern void wait_for_device_probe(void);
-
-
-/* sysfs interface for exporting driver attributes */
-
-struct driver_attribute {
-	struct attribute attr;
-	ssize_t (*show)(struct device_driver *driver, char *buf);
-	ssize_t (*store)(struct device_driver *driver, const char *buf,
-			 size_t count);
-};
-
-#define DRIVER_ATTR(_name, _mode, _show, _store)	\
-struct driver_attribute driver_attr_##_name =		\
-	__ATTR(_name, _mode, _show, _store)
-
-extern int __must_check driver_create_file(struct device_driver *driver,
-					const struct driver_attribute *attr);
-extern void driver_remove_file(struct device_driver *driver,
-			       const struct driver_attribute *attr);
-
-extern int __must_check driver_for_each_device(struct device_driver *drv,
-					       struct device *start,
-					       void *data,
-					       int (*fn)(struct device *dev,
-							 void *));
-struct device *driver_find_device(struct device_driver *drv,
-				  struct device *start, void *data,
-				  int (*match)(struct device *dev, void *data));
-
-/**
- * struct subsys_interface - interfaces to device functions
- * @name:       name of the device function
- * @subsys:     subsytem of the devices to attach to
- * @node:       the list of functions registered at the subsystem
- * @add_dev:    device hookup to device function handler
- * @remove_dev: device hookup to device function handler
- *
- * Simple interfaces attached to a subsystem. Multiple interfaces can
- * attach to a subsystem and its devices. Unlike drivers, they do not
- * exclusively claim or control devices. Interfaces usually represent
- * a specific functionality of a subsystem/class of devices.
- */
-struct subsys_interface {
-	const char *name;
-	struct bus_type *subsys;
-	struct list_head node;
-	int (*add_dev)(struct device *dev, struct subsys_interface *sif);
-	int (*remove_dev)(struct device *dev, struct subsys_interface *sif);
-};
-
-int subsys_interface_register(struct subsys_interface *sif);
-void subsys_interface_unregister(struct subsys_interface *sif);
-
-int subsys_system_register(struct bus_type *subsys,
-			   const struct attribute_group **groups);
-
-/**
- * struct class - device classes
- * @name:	Name of the class.
- * @owner:	The module owner.
- * @class_attrs: Default attributes of this class.
- * @dev_attrs:	Default attributes of the devices belong to the class.
- * @dev_bin_attrs: Default binary attributes of the devices belong to the class.
- * @dev_kobj:	The kobject that represents this class and links it into the hierarchy.
- * @dev_uevent:	Called when a device is added, removed from this class, or a
- *		few other things that generate uevents to add the environment
- *		variables.
- * @devnode:	Callback to provide the devtmpfs.
- * @class_release: Called to release this class.
- * @dev_release: Called to release the device.
- * @suspend:	Used to put the device to sleep mode, usually to a low power
- *		state.
- * @resume:	Used to bring the device from the sleep mode.
- * @ns_type:	Callbacks so sysfs can detemine namespaces.
- * @namespace:	Namespace of the device belongs to this class.
- * @pm:		The default device power management operations of this class.
- * @p:		The private data of the driver core, no one other than the
- *		driver core can touch this.
- *
- * A class is a higher-level view of a device that abstracts out low-level
- * implementation details. Drivers may see a SCSI disk or an ATA disk, but,
- * at the class level, they are all simply disks. Classes allow user space
- * to work with devices based on what they do, rather than how they are
- * connected or how they work.
- */
-struct class {
-	const char		*name;
-	struct module		*owner;
-
-	struct class_attribute		*class_attrs;
-	struct device_attribute		*dev_attrs;
-	struct bin_attribute		*dev_bin_attrs;
-	struct kobject			*dev_kobj;
-
-	int (*dev_uevent)(struct device *dev, struct kobj_uevent_env *env);
-	char *(*devnode)(struct device *dev, umode_t *mode);
-
-	void (*class_release)(struct class *class);
-	void (*dev_release)(struct device *dev);
-
-	int (*suspend)(struct device *dev, pm_message_t state);
-	int (*resume)(struct device *dev);
-
-	const struct kobj_ns_type_operations *ns_type;
-	const void *(*namespace)(struct device *dev);
-
-	const struct dev_pm_ops *pm;
-
-	struct subsys_private *p;
-};
-
-struct class_dev_iter {
-	struct klist_iter		ki;
-	const struct device_type	*type;
-};
-
-extern struct kobject *sysfs_dev_block_kobj;
-extern struct kobject *sysfs_dev_char_kobj;
-extern int __must_check __class_register(struct class *class,
-					 struct lock_class_key *key);
-extern void class_unregister(struct class *class);
-
-/* This is a #define to keep the compiler from merging different
- * instances of the __key variable */
-#define class_register(class)			\
-({						\
-	static struct lock_class_key __key;	\
-	__class_register(class, &__key);	\
-})
-
-struct class_compat;
-struct class_compat *class_compat_register(const char *name);
-void class_compat_unregister(struct class_compat *cls);
-int class_compat_create_link(struct class_compat *cls, struct device *dev,
-			     struct device *device_link);
-void class_compat_remove_link(struct class_compat *cls, struct device *dev,
-			      struct device *device_link);
-
-extern void class_dev_iter_init(struct class_dev_iter *iter,
-				struct class *class,
-				struct device *start,
-				const struct device_type *type);
-extern struct device *class_dev_iter_next(struct class_dev_iter *iter);
-extern void class_dev_iter_exit(struct class_dev_iter *iter);
-
-extern int class_for_each_device(struct class *class, struct device *start,
-				 void *data,
-				 int (*fn)(struct device *dev, void *data));
-extern struct device *class_find_device(struct class *class,
-					struct device *start, void *data,
-					int (*match)(struct device *, void *));
-
-struct class_attribute {
-	struct attribute attr;
-	ssize_t (*show)(struct class *class, struct class_attribute *attr,
-			char *buf);
-	ssize_t (*store)(struct class *class, struct class_attribute *attr,
-			const char *buf, size_t count);
-	const void *(*namespace)(struct class *class,
-				 const struct class_attribute *attr);
-};
-
-#define CLASS_ATTR(_name, _mode, _show, _store)			\
-struct class_attribute class_attr_##_name = __ATTR(_name, _mode, _show, _store)
-
-extern int __must_check class_create_file(struct class *class,
-					  const struct class_attribute *attr);
-extern void class_remove_file(struct class *class,
-			      const struct class_attribute *attr);
-
-/* Simple class attribute that is just a static string */
-
-struct class_attribute_string {
-	struct class_attribute attr;
-	char *str;
-};
-
-/* Currently read-only only */
-#define _CLASS_ATTR_STRING(_name, _mode, _str) \
-	{ __ATTR(_name, _mode, show_class_attr_string, NULL), _str }
-#define CLASS_ATTR_STRING(_name, _mode, _str) \
-	struct class_attribute_string class_attr_##_name = \
-		_CLASS_ATTR_STRING(_name, _mode, _str)
-
-extern ssize_t show_class_attr_string(struct class *class, struct class_attribute *attr,
-                        char *buf);
-
-struct class_interface {
-	struct list_head	node;
-	struct class		*class;
-
-	int (*add_dev)		(struct device *, struct class_interface *);
-	void (*remove_dev)	(struct device *, struct class_interface *);
-};
-
-extern int __must_check class_interface_register(struct class_interface *);
-extern void class_interface_unregister(struct class_interface *);
-
-extern struct class * __must_check __class_create(struct module *owner,
-						  const char *name,
-						  struct lock_class_key *key);
-extern void class_destroy(struct class *cls);
-
-/* This is a #define to keep the compiler from merging different
- * instances of the __key variable */
-#define class_create(owner, name)		\
-({						\
-	static struct lock_class_key __key;	\
-	__class_create(owner, name, &__key);	\
-})
-
-/*
- * The type of device, "struct device" is embedded in. A class
- * or bus can contain devices of different types
- * like "partitions" and "disks", "mouse" and "event".
- * This identifies the device type and carries type-specific
- * information, equivalent to the kobj_type of a kobject.
- * If "name" is specified, the uevent will contain it in
- * the DEVTYPE variable.
- */
-struct device_type {
-	const char *name;
-	const struct attribute_group **groups;
-	int (*uevent)(struct device *dev, struct kobj_uevent_env *env);
-	char *(*devnode)(struct device *dev, umode_t *mode);
-	void (*release)(struct device *dev);
-
-	const struct dev_pm_ops *pm;
-};
-
-/* interface for exporting device attributes */
-struct device_attribute {
-	struct attribute	attr;
-	ssize_t (*show)(struct device *dev, struct device_attribute *attr,
-			char *buf);
-	ssize_t (*store)(struct device *dev, struct device_attribute *attr,
-			 const char *buf, size_t count);
-};
-
-struct dev_ext_attribute {
-	struct device_attribute attr;
-	void *var;
-};
-
-ssize_t device_show_ulong(struct device *dev, struct device_attribute *attr,
-			  char *buf);
-ssize_t device_store_ulong(struct device *dev, struct device_attribute *attr,
-			   const char *buf, size_t count);
-ssize_t device_show_int(struct device *dev, struct device_attribute *attr,
-			char *buf);
-ssize_t device_store_int(struct device *dev, struct device_attribute *attr,
-			 const char *buf, size_t count);
-
-#define DEVICE_ATTR(_name, _mode, _show, _store) \
-	struct device_attribute dev_attr_##_name = __ATTR(_name, _mode, _show, _store)
-#define DEVICE_ULONG_ATTR(_name, _mode, _var) \
-	struct dev_ext_attribute dev_attr_##_name = \
-		{ __ATTR(_name, _mode, device_show_ulong, device_store_ulong), &(_var) }
-#define DEVICE_INT_ATTR(_name, _mode, _var) \
-	struct dev_ext_attribute dev_attr_##_name = \
-		{ __ATTR(_name, _mode, device_show_ulong, device_store_ulong), &(_var) }
-
-extern int device_create_file(struct device *device,
-			      const struct device_attribute *entry);
-extern void device_remove_file(struct device *dev,
-			       const struct device_attribute *attr);
-extern int __must_check device_create_bin_file(struct device *dev,
-					const struct bin_attribute *attr);
-extern void device_remove_bin_file(struct device *dev,
-				   const struct bin_attribute *attr);
-extern int device_schedule_callback_owner(struct device *dev,
-		void (*func)(struct device *dev), struct module *owner);
-
-/* This is a macro to avoid include problems with THIS_MODULE */
-#define device_schedule_callback(dev, func)			\
-	device_schedule_callback_owner(dev, func, THIS_MODULE)
-
-/* device resource management */
-typedef void (*dr_release_t)(struct device *dev, void *res);
-typedef int (*dr_match_t)(struct device *dev, void *res, void *match_data);
-
-#ifdef CONFIG_DEBUG_DEVRES
-extern void *__devres_alloc(dr_release_t release, size_t size, gfp_t gfp,
-			     const char *name);
-#define devres_alloc(release, size, gfp) \
-	__devres_alloc(release, size, gfp, #release)
-#else
-extern void *devres_alloc(dr_release_t release, size_t size, gfp_t gfp);
-#endif
-extern void devres_free(void *res);
-extern void devres_add(struct device *dev, void *res);
-extern void *devres_find(struct device *dev, dr_release_t release,
-			 dr_match_t match, void *match_data);
-extern void *devres_get(struct device *dev, void *new_res,
-			dr_match_t match, void *match_data);
-extern void *devres_remove(struct device *dev, dr_release_t release,
-			   dr_match_t match, void *match_data);
-extern int devres_destroy(struct device *dev, dr_release_t release,
-			  dr_match_t match, void *match_data);
-
-/* devres group */
-extern void * __must_check devres_open_group(struct device *dev, void *id,
-					     gfp_t gfp);
-extern void devres_close_group(struct device *dev, void *id);
-extern void devres_remove_group(struct device *dev, void *id);
-extern int devres_release_group(struct device *dev, void *id);
-
-/* managed kzalloc/kfree for device drivers, no kmalloc, always use kzalloc */
-extern void *devm_kzalloc(struct device *dev, size_t size, gfp_t gfp);
-extern void devm_kfree(struct device *dev, void *p);
-
-void __iomem *devm_request_and_ioremap(struct device *dev,
-			struct resource *res);
-
-struct device_dma_parameters {
-	/*
-	 * a low level driver may set these to teach IOMMU code about
-	 * sg limitations.
-	 */
-	unsigned int max_segment_size;
-	unsigned long segment_boundary_mask;
-};
-
-/**
- * struct device - The basic device structure
- * @parent:	The device's "parent" device, the device to which it is attached.
- * 		In most cases, a parent device is some sort of bus or host
- * 		controller. If parent is NULL, the device, is a top-level device,
- * 		which is not usually what you want.
- * @p:		Holds the private data of the driver core portions of the device.
- * 		See the comment of the struct device_private for detail.
- * @kobj:	A top-level, abstract class from which other classes are derived.
- * @init_name:	Initial name of the device.
- * @type:	The type of device.
- * 		This identifies the device type and carries type-specific
- * 		information.
- * @mutex:	Mutex to synchronize calls to its driver.
- * @bus:	Type of bus device is on.
- * @driver:	Which driver has allocated this
- * @platform_data: Platform data specific to the device.
- * 		Example: For devices on custom boards, as typical of embedded
- * 		and SOC based hardware, Linux often uses platform_data to point
- * 		to board-specific structures describing devices and how they
- * 		are wired.  That can include what ports are available, chip
- * 		variants, which GPIO pins act in what additional roles, and so
- * 		on.  This shrinks the "Board Support Packages" (BSPs) and
- * 		minimizes board-specific #ifdefs in drivers.
- * @power:	For device power management.
- * 		See Documentation/power/devices.txt for details.
- * @pm_domain:	Provide callbacks that are executed during system suspend,
- * 		hibernation, system resume and during runtime PM transitions
- * 		along with subsystem-level and driver-level callbacks.
- * @numa_node:	NUMA node this device is close to.
- * @dma_mask:	Dma mask (if dma'ble device).
- * @coherent_dma_mask: Like dma_mask, but for alloc_coherent mapping as not all
- * 		hardware supports 64-bit addresses for consistent allocations
- * 		such descriptors.
- * @dma_parms:	A low level driver may set these to teach IOMMU code about
- * 		segment limitations.
- * @dma_pools:	Dma pools (if dma'ble device).
- * @dma_mem:	Internal for coherent mem override.
- * @archdata:	For arch-specific additions.
- * @of_node:	Associated device tree node.
- * @devt:	For creating the sysfs "dev".
- * @id:		device instance
- * @devres_lock: Spinlock to protect the resource of the device.
- * @devres_head: The resources list of the device.
- * @knode_class: The node used to add the device to the class list.
- * @class:	The class of the device.
- * @groups:	Optional attribute groups.
- * @release:	Callback to free the device after all references have
- * 		gone away. This should be set by the allocator of the
- * 		device (i.e. the bus driver that discovered the device).
- *
- * At the lowest level, every device in a Linux system is represented by an
- * instance of struct device. The device structure contains the information
- * that the device model core needs to model the system. Most subsystems,
- * however, track additional information about the devices they host. As a
- * result, it is rare for devices to be represented by bare device structures;
- * instead, that structure, like kobject structures, is usually embedded within
- * a higher-level representation of the device.
- */
-struct device {
-	struct device		*parent;
-
-	struct device_private	*p;
-
-	struct kobject kobj;
-	const char		*init_name; /* initial name of the device */
-	const struct device_type *type;
-
-	struct mutex		mutex;	/* mutex to synchronize calls to
-					 * its driver.
-					 */
-
-	struct bus_type	*bus;		/* type of bus device is on */
-	struct device_driver *driver;	/* which driver has allocated this
-					   device */
-	void		*platform_data;	/* Platform specific data, device
-					   core doesn't touch it */
-	struct dev_pm_info	power;
-	struct dev_pm_domain	*pm_domain;
-
-#ifdef CONFIG_NUMA
-	int		numa_node;	/* NUMA node this device is close to */
-#endif
-	u64		*dma_mask;	/* dma mask (if dma'able device) */
-	u64		coherent_dma_mask;/* Like dma_mask, but for
-					     alloc_coherent mappings as
-					     not all hardware supports
-					     64 bit addresses for consistent
-					     allocations such descriptors. */
-
-	struct device_dma_parameters *dma_parms;
-
-	struct list_head	dma_pools;	/* dma pools (if dma'ble) */
-
-	struct dma_coherent_mem	*dma_mem; /* internal for coherent mem
-					     override */
-	/* arch specific additions */
-	struct dev_archdata	archdata;
-
-	struct device_node	*of_node; /* associated device tree node */
-
-	dev_t			devt;	/* dev_t, creates the sysfs "dev" */
-	u32			id;	/* device instance */
-
-	spinlock_t		devres_lock;
-	struct list_head	devres_head;
-
-	struct klist_node	knode_class;
-	struct class		*class;
-	const struct attribute_group **groups;	/* optional groups */
-
-	void	(*release)(struct device *dev);
-};
-
-/* Get the wakeup routines, which depend on struct device */
-#include <linux/pm_wakeup.h>
-
-static inline const char *dev_name(const struct device *dev)
-{
-	/* Use the init name until the kobject becomes available */
-	if (dev->init_name)
-		return dev->init_name;
-
-	return kobject_name(&dev->kobj);
-}
-
-extern __printf(2, 3)
-int dev_set_name(struct device *dev, const char *name, ...);
-
-#ifdef CONFIG_NUMA
-static inline int dev_to_node(struct device *dev)
-{
-	return dev->numa_node;
-}
-static inline void set_dev_node(struct device *dev, int node)
-{
-	dev->numa_node = node;
-}
-#else
-static inline int dev_to_node(struct device *dev)
-{
-	return -1;
-}
-static inline void set_dev_node(struct device *dev, int node)
-{
-}
-#endif
-
-static inline struct pm_subsys_data *dev_to_psd(struct device *dev)
-{
-	return dev ? dev->power.subsys_data : NULL;
-}
-
-static inline unsigned int dev_get_uevent_suppress(const struct device *dev)
-{
-	return dev->kobj.uevent_suppress;
-}
-
-static inline void dev_set_uevent_suppress(struct device *dev, int val)
-{
-	dev->kobj.uevent_suppress = val;
-}
-
-static inline int device_is_registered(struct device *dev)
-{
-	return dev->kobj.state_in_sysfs;
-}
-
-static inline void device_enable_async_suspend(struct device *dev)
-{
-	if (!dev->power.is_prepared)
-		dev->power.async_suspend = true;
-}
-
-static inline void device_disable_async_suspend(struct device *dev)
-{
-	if (!dev->power.is_prepared)
-		dev->power.async_suspend = false;
-}
-
-static inline bool device_async_suspend_enabled(struct device *dev)
-{
-	return !!dev->power.async_suspend;
-}
-
-static inline void pm_suspend_ignore_children(struct device *dev, bool enable)
-{
-	dev->power.ignore_children = enable;
-}
-
-static inline void device_lock(struct device *dev)
-{
-	mutex_lock(&dev->mutex);
-}
-
-static inline int device_trylock(struct device *dev)
-{
-	return mutex_trylock(&dev->mutex);
-}
-
-static inline void device_unlock(struct device *dev)
-{
-	mutex_unlock(&dev->mutex);
-}
-
-void driver_init(void);
-
-/*
- * High level routines for use by the bus drivers
- */
-extern int __must_check device_register(struct device *dev);
-extern void device_unregister(struct device *dev);
-extern void device_initialize(struct device *dev);
-extern int __must_check device_add(struct device *dev);
-extern void device_del(struct device *dev);
-extern int device_for_each_child(struct device *dev, void *data,
-		     int (*fn)(struct device *dev, void *data));
-extern struct device *device_find_child(struct device *dev, void *data,
-				int (*match)(struct device *dev, void *data));
-extern int device_rename(struct device *dev, const char *new_name);
-extern int device_move(struct device *dev, struct device *new_parent,
-		       enum dpm_order dpm_order);
-extern const char *device_get_devnode(struct device *dev,
-				      umode_t *mode, const char **tmp);
-extern void *dev_get_drvdata(const struct device *dev);
-extern int dev_set_drvdata(struct device *dev, void *data);
-
-/*
- * Root device objects for grouping under /sys/devices
- */
-extern struct device *__root_device_register(const char *name,
-					     struct module *owner);
-
-/*
- * This is a macro to avoid include problems with THIS_MODULE,
- * just as per what is done for device_schedule_callback() above.
- */
-#define root_device_register(name) \
-	__root_device_register(name, THIS_MODULE)
-
-extern void root_device_unregister(struct device *root);
-
-static inline void *dev_get_platdata(const struct device *dev)
-{
-	return dev->platform_data;
-}
-
-/*
- * Manual binding of a device to driver. See drivers/base/bus.c
- * for information on use.
- */
-extern int __must_check device_bind_driver(struct device *dev);
-extern void device_release_driver(struct device *dev);
-extern int  __must_check device_attach(struct device *dev);
-extern int __must_check driver_attach(struct device_driver *drv);
-extern int __must_check device_reprobe(struct device *dev);
-
-/*
- * Easy functions for dynamically creating devices on the fly
- */
-extern struct device *device_create_vargs(struct class *cls,
-					  struct device *parent,
-					  dev_t devt,
-					  void *drvdata,
-					  const char *fmt,
-					  va_list vargs);
-extern __printf(5, 6)
-struct device *device_create(struct class *cls, struct device *parent,
-			     dev_t devt, void *drvdata,
-			     const char *fmt, ...);
-extern void device_destroy(struct class *cls, dev_t devt);
-
-/*
- * Platform "fixup" functions - allow the platform to have their say
- * about devices and actions that the general device layer doesn't
- * know about.
- */
-/* Notify platform of device discovery */
-extern int (*platform_notify)(struct device *dev);
-
-extern int (*platform_notify_remove)(struct device *dev);
-
-
-/*
- * get_device - atomically increment the reference count for the device.
- *
- */
-extern struct device *get_device(struct device *dev);
-extern void put_device(struct device *dev);
-
-extern void wait_for_device_probe(void);
-
-#ifdef CONFIG_DEVTMPFS
-extern int devtmpfs_create_node(struct device *dev);
-extern int devtmpfs_delete_node(struct device *dev);
-extern int devtmpfs_mount(const char *mntdir);
-#else
-static inline int devtmpfs_create_node(struct device *dev) { return 0; }
-static inline int devtmpfs_delete_node(struct device *dev) { return 0; }
-static inline int devtmpfs_mount(const char *mountpoint) { return 0; }
-#endif
-
-/* drivers/base/power/shutdown.c */
-extern void device_shutdown(void);
-
-/* debugging and troubleshooting/diagnostic helpers. */
-extern const char *dev_driver_string(const struct device *dev);
-
-
-#ifdef CONFIG_PRINTK
-
-extern int __dev_printk(const char *level, const struct device *dev,
-			struct va_format *vaf);
-extern __printf(3, 4)
-int dev_printk(const char *level, const struct device *dev,
-	       const char *fmt, ...)
-	;
-extern __printf(2, 3)
-int dev_emerg(const struct device *dev, const char *fmt, ...);
-extern __printf(2, 3)
-int dev_alert(const struct device *dev, const char *fmt, ...);
-extern __printf(2, 3)
-int dev_crit(const struct device *dev, const char *fmt, ...);
-extern __printf(2, 3)
-int dev_err(const struct device *dev, const char *fmt, ...);
-extern __printf(2, 3)
-int dev_warn(const struct device *dev, const char *fmt, ...);
-extern __printf(2, 3)
-int dev_notice(const struct device *dev, const char *fmt, ...);
-extern __printf(2, 3)
-int _dev_info(const struct device *dev, const char *fmt, ...);
-
-#else
-
-static inline int __dev_printk(const char *level, const struct device *dev,
-			       struct va_format *vaf)
-{ return 0; }
-static inline __printf(3, 4)
-int dev_printk(const char *level, const struct device *dev,
-	       const char *fmt, ...)
-{ return 0; }
-
-static inline __printf(2, 3)
-int dev_emerg(const struct device *dev, const char *fmt, ...)
-{ return 0; }
-static inline __printf(2, 3)
-int dev_crit(const struct device *dev, const char *fmt, ...)
-{ return 0; }
-static inline __printf(2, 3)
-int dev_alert(const struct device *dev, const char *fmt, ...)
-{ return 0; }
-static inline __printf(2, 3)
-int dev_err(const struct device *dev, const char *fmt, ...)
-{ return 0; }
-static inline __printf(2, 3)
-int dev_warn(const struct device *dev, const char *fmt, ...)
-{ return 0; }
-static inline __printf(2, 3)
-int dev_notice(const struct device *dev, const char *fmt, ...)
-{ return 0; }
-static inline __printf(2, 3)
-int _dev_info(const struct device *dev, const char *fmt, ...)
-{ return 0; }
-
-#endif
-
-/*
- * Stupid hackaround for existing uses of non-printk uses dev_info
- *
- * Note that the definition of dev_info below is actually _dev_info
- * and a macro is used to avoid redefining dev_info
- */
-
-#define dev_info(dev, fmt, arg...) _dev_info(dev, fmt, ##arg)
-
-#if defined(CONFIG_DYNAMIC_DEBUG)
-#define dev_dbg(dev, format, ...)		     \
-do {						     \
-	dynamic_dev_dbg(dev, format, ##__VA_ARGS__); \
-} while (0)
-#elif defined(DEBUG)
-#define dev_dbg(dev, format, arg...)		\
-	dev_printk(KERN_DEBUG, dev, format, ##arg)
-#else
-#define dev_dbg(dev, format, arg...)				\
-({								\
-	if (0)							\
-		dev_printk(KERN_DEBUG, dev, format, ##arg);	\
-	0;							\
-})
-#endif
-
-#ifdef VERBOSE_DEBUG
-#define dev_vdbg	dev_dbg
-#else
-#define dev_vdbg(dev, format, arg...)				\
-({								\
-	if (0)							\
-		dev_printk(KERN_DEBUG, dev, format, ##arg);	\
-	0;							\
-})
-#endif
-
-/*
- * dev_WARN*() acts like dev_printk(), but with the key difference
- * of using a WARN/WARN_ON to get the message out, including the
- * file/line information and a backtrace.
- */
-#define dev_WARN(dev, format, arg...) \
-	WARN(1, "Device: %s\n" format, dev_driver_string(dev), ## arg);
-
-#define dev_WARN_ONCE(dev, condition, format, arg...) \
-	WARN_ONCE(condition, "Device %s\n" format, \
-			dev_driver_string(dev), ## arg)
-
-/* Create alias, so I can be autoloaded. */
-#define MODULE_ALIAS_CHARDEV(major,minor) \
-	MODULE_ALIAS("char-major-" __stringify(major) "-" __stringify(minor))
-#define MODULE_ALIAS_CHARDEV_MAJOR(major) \
-	MODULE_ALIAS("char-major-" __stringify(major) "-*")
-
-#ifdef CONFIG_SYSFS_DEPRECATED
-extern long sysfs_deprecated;
-#else
-#define sysfs_deprecated 0
-#endif
-
-/**
- * module_driver() - Helper macro for drivers that don't do anything
- * special in module init/exit. This eliminates a lot of boilerplate.
- * Each module may only use this macro once, and calling it replaces
- * module_init() and module_exit().
- *
- * @__driver: driver name
- * @__register: register function for this driver type
- * @__unregister: unregister function for this driver type
- * @...: Additional arguments to be passed to __register and __unregister.
- *
- * Use this macro to construct bus specific macros for registering
- * drivers, and do not use it on its own.
- */
-#define module_driver(__driver, __register, __unregister, ...) \
-static int __init __driver##_init(void) \
-{ \
-	return __register(&(__driver) , ##__VA_ARGS__); \
-} \
-module_init(__driver##_init); \
-static void __exit __driver##_exit(void) \
-{ \
-	__unregister(&(__driver) , ##__VA_ARGS__); \
-} \
-module_exit(__driver##_exit);
-
-#endif /* _DEVICE_H_ */
diff --git a/ANDROID_3.4.5/include/linux/device_cgroup.h b/ANDROID_3.4.5/include/linux/device_cgroup.h
deleted file mode 100644
index 8b64221b..00000000
--- a/ANDROID_3.4.5/include/linux/device_cgroup.h
+++ /dev/null
@@ -1,19 +0,0 @@
-#include <linux/fs.h>
-
-#ifdef CONFIG_CGROUP_DEVICE
-extern int __devcgroup_inode_permission(struct inode *inode, int mask);
-extern int devcgroup_inode_mknod(int mode, dev_t dev);
-static inline int devcgroup_inode_permission(struct inode *inode, int mask)
-{
-	if (likely(!inode->i_rdev))
-		return 0;
-	if (!S_ISBLK(inode->i_mode) && !S_ISCHR(inode->i_mode))
-		return 0;
-	return __devcgroup_inode_permission(inode, mask);
-}
-#else
-static inline int devcgroup_inode_permission(struct inode *inode, int mask)
-{ return 0; }
-static inline int devcgroup_inode_mknod(int mode, dev_t dev)
-{ return 0; }
-#endif
diff --git a/ANDROID_3.4.5/include/linux/devpts_fs.h b/ANDROID_3.4.5/include/linux/devpts_fs.h
deleted file mode 100644
index 5ce0e5fd..00000000
--- a/ANDROID_3.4.5/include/linux/devpts_fs.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/* -*- linux-c -*- --------------------------------------------------------- *
- *
- * linux/include/linux/devpts_fs.h
- *
- *  Copyright 1998-2004 H. Peter Anvin -- All Rights Reserved
- *
- * This file is part of the Linux kernel and is made available under
- * the terms of the GNU General Public License, version 2, or at your
- * option, any later version, incorporated herein by reference.
- *
- * ------------------------------------------------------------------------- */
-
-#ifndef _LINUX_DEVPTS_FS_H
-#define _LINUX_DEVPTS_FS_H
-
-#include <linux/errno.h>
-
-#ifdef CONFIG_UNIX98_PTYS
-
-int devpts_new_index(struct inode *ptmx_inode);
-void devpts_kill_index(struct inode *ptmx_inode, int idx);
-/* mknod in devpts */
-int devpts_pty_new(struct inode *ptmx_inode, struct tty_struct *tty);
-/* get tty structure */
-struct tty_struct *devpts_get_tty(struct inode *pts_inode, int number);
-/* unlink */
-void devpts_pty_kill(struct tty_struct *tty);
-
-#else
-
-/* Dummy stubs in the no-pty case */
-static inline int devpts_new_index(struct inode *ptmx_inode) { return -EINVAL; }
-static inline void devpts_kill_index(struct inode *ptmx_inode, int idx) { }
-static inline int devpts_pty_new(struct inode *ptmx_inode,
-				struct tty_struct *tty)
-{
-	return -EINVAL;
-}
-static inline struct tty_struct *devpts_get_tty(struct inode *pts_inode,
-		int number)
-{
-	return NULL;
-}
-static inline void devpts_pty_kill(struct tty_struct *tty) { }
-
-#endif
-
-
-#endif /* _LINUX_DEVPTS_FS_H */
diff --git a/ANDROID_3.4.5/include/linux/digsig.h b/ANDROID_3.4.5/include/linux/digsig.h
deleted file mode 100644
index 6f85a070..00000000
--- a/ANDROID_3.4.5/include/linux/digsig.h
+++ /dev/null
@@ -1,64 +0,0 @@
-/*
- * Copyright (C) 2011 Nokia Corporation
- * Copyright (C) 2011 Intel Corporation
- *
- * Author:
- * Dmitry Kasatkin <dmitry.kasatkin@nokia.com>
- *                 <dmitry.kasatkin@intel.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, version 2 of the License.
- *
- */
-
-#ifndef _DIGSIG_H
-#define _DIGSIG_H
-
-#include <linux/key.h>
-
-enum pubkey_algo {
-	PUBKEY_ALGO_RSA,
-	PUBKEY_ALGO_MAX,
-};
-
-enum digest_algo {
-	DIGEST_ALGO_SHA1,
-	DIGEST_ALGO_SHA256,
-	DIGEST_ALGO_MAX
-};
-
-struct pubkey_hdr {
-	uint8_t		version;	/* key format version */
-	uint32_t	timestamp;	/* key made, always 0 for now */
-	uint8_t		algo;
-	uint8_t		nmpi;
-	char		mpi[0];
-} __packed;
-
-struct signature_hdr {
-	uint8_t		version;	/* signature format version */
-	uint32_t	timestamp;	/* signature made */
-	uint8_t		algo;
-	uint8_t		hash;
-	uint8_t		keyid[8];
-	uint8_t		nmpi;
-	char		mpi[0];
-} __packed;
-
-#if defined(CONFIG_SIGNATURE) || defined(CONFIG_SIGNATURE_MODULE)
-
-int digsig_verify(struct key *keyring, const char *sig, int siglen,
-					const char *digest, int digestlen);
-
-#else
-
-static inline int digsig_verify(struct key *keyring, const char *sig,
-				int siglen, const char *digest, int digestlen)
-{
-	return -EOPNOTSUPP;
-}
-
-#endif /* CONFIG_SIGNATURE */
-
-#endif /* _DIGSIG_H */
diff --git a/ANDROID_3.4.5/include/linux/dio.h b/ANDROID_3.4.5/include/linux/dio.h
deleted file mode 100644
index 2cc0fd00..00000000
--- a/ANDROID_3.4.5/include/linux/dio.h
+++ /dev/null
@@ -1,280 +0,0 @@
-/* header file for DIO boards for the HP300 architecture.
- * Maybe this should handle DIO-II later?
- * The general structure of this is vaguely based on how
- * the Amiga port handles Zorro boards.
- * Copyright (C) Peter Maydell 05/1998 <pmaydell@chiark.greenend.org.uk>
- * Converted to driver model Jochen Friedrich <jochen@scram.de>
- *
- * The board IDs are from the NetBSD kernel, which for once provided
- * helpful comments...
- *
- * This goes with drivers/dio/dio.c
- */
-
-#ifndef _LINUX_DIO_H
-#define _LINUX_DIO_H
-
-/* The DIO boards in a system are distinguished by 'select codes' which 
- * range from 0-63 (DIO) and 132-255 (DIO-II). 
- * The DIO board with select code sc is located at physical address 
- *     0x600000 + sc * 0x10000
- * So DIO cards cover [0x600000-0x800000); the areas [0x200000-0x400000) and
- * [0x800000-0x1000000) are for additional space required by things
- * like framebuffers. [0x400000-0x600000) is for miscellaneous internal I/O.
- * On Linux, this is currently all mapped into the virtual address space
- * at 0xf0000000 on bootup.
- * DIO-II boards are at 0x1000000 + (sc - 132) * 0x400000
- * which is address range [0x1000000-0x20000000) -- too big to map completely,
- * so currently we just don't handle DIO-II boards.  It wouldn't be hard to 
- * do with ioremap() though.
- */
-
-#include <linux/device.h>
-
-#ifdef __KERNEL__
-
-#include <asm/hp300hw.h>
-
-typedef __u16 dio_id;
-
-    /*
-     *  DIO devices
-     */
-
-struct dio_dev {
-	struct dio_bus *bus;
-	dio_id id;
-	int scode;
-	struct dio_driver *driver;	/* which driver has allocated this device */
-	struct device dev;		/* Generic device interface */
-	u8 ipl;
-	char name[64];
-	struct resource resource;
-};
-
-#define to_dio_dev(n) container_of(n, struct dio_dev, dev)
-
-    /*
-     *  DIO bus
-     */
-
-struct dio_bus {
-	struct list_head devices;           /* list of devices on this bus */
-	unsigned int num_resources;         /* number of resources */
-	struct resource resources[2];       /* address space routed to this bus */
-	struct device dev;
-	char name[10];
-};
-
-extern struct dio_bus dio_bus;      /* Single DIO bus */
-extern struct bus_type dio_bus_type;
-
-    /*
-     *  DIO device IDs
-     */
-
-struct dio_device_id {
-	dio_id id;                    /* Device ID or DIO_WILDCARD */
-	unsigned long driver_data;    /* Data private to the driver */
-};
-
-    /*
-     *  DIO device drivers
-     */
-
-struct dio_driver {
-	struct list_head node;
-	char *name;
-	const struct dio_device_id *id_table;     /* NULL if wants all devices */
-	int (*probe)(struct dio_dev *z, const struct dio_device_id *id);
-/* New device inserted */
-	void (*remove)(struct dio_dev *z);        /* Device removed (NULL if not a hot-plug capable driver) */
-	struct device_driver driver;
-};
-
-#define to_dio_driver(drv)    container_of(drv, struct dio_driver, driver)
-
-/* DIO/DIO-II boards all have the following 8bit registers.
- * These are offsets from the base of the device.
- */
-#define DIO_IDOFF     0x01             /* primary device ID */
-#define DIO_IPLOFF    0x03             /* interrupt priority level */
-#define DIO_SECIDOFF  0x15             /* secondary device ID */
-#define DIOII_SIZEOFF 0x101            /* device size, DIO-II only */
-#define DIO_VIRADDRBASE 0xf0000000UL   /* vir addr where IOspace is mapped */
-
-#define DIO_BASE                0x600000        /* start of DIO space */
-#define DIO_END                 0x1000000       /* end of DIO space */
-#define DIO_DEVSIZE             0x10000         /* size of a DIO device */
-
-#define DIOII_BASE              0x01000000      /* start of DIO-II space */
-#define DIOII_END               0x20000000      /* end of DIO-II space */
-#define DIOII_DEVSIZE           0x00400000      /* size of a DIO-II device */
-
-/* Highest valid select code. If we add DIO-II support this should become
- * 256 for everything except HP320, which only has DIO.
- */
-#define DIO_SCMAX (hp300_model == HP_320 ? 32 : 256)
-#define DIOII_SCBASE 132 /* lowest DIO-II select code */
-#define DIO_SCINHOLE(scode) (((scode) >= 32) && ((scode) < DIOII_SCBASE))
-#define DIO_ISDIOII(scode) ((scode) >= 132 && (scode) < 256)
-
-/* macros to read device IDs, given base address */
-#define DIO_ID(baseaddr) in_8((baseaddr) + DIO_IDOFF)
-#define DIO_SECID(baseaddr) in_8((baseaddr) + DIO_SECIDOFF)
-
-/* extract the interrupt level */
-#define DIO_IPL(baseaddr) (((in_8((baseaddr) + DIO_IPLOFF) >> 4) & 0x03) + 3)
-
-/* find the size of a DIO-II board's address space.
- * DIO boards are all fixed length.
- */
-#define DIOII_SIZE(baseaddr) ((in_8((baseaddr) + DIOII_SIZEOFF) + 1) * 0x100000)
-
-/* general purpose macro for both DIO and DIO-II */
-#define DIO_SIZE(scode, base) (DIO_ISDIOII((scode)) ? DIOII_SIZE((base)) : DIO_DEVSIZE)
-
-/* The hardware has primary and secondary IDs; we encode these in a single
- * int as PRIMARY ID & (SECONDARY ID << 8).
- * In practice this is only important for framebuffers,
- * and everybody else just sets ID fields equal to the DIO_ID_FOO value.
- */
-#define DIO_ENCODE_ID(pr,sec) ((((int)sec & 0xff) << 8) | ((int)pr & 0xff))
-/* macro to determine whether a given primary ID requires a secondary ID byte */
-#define DIO_NEEDSSECID(id) ((id) == DIO_ID_FBUFFER)
-#define DIO_WILDCARD 0xff
-
-/* Now a whole slew of macros giving device IDs and descriptive strings: */
-#define DIO_ID_DCA0     0x02 /* 98644A serial */
-#define DIO_DESC_DCA0 "98644A DCA0 serial"
-#define DIO_ID_DCA0REM  0x82 /* 98644A serial */
-#define DIO_DESC_DCA0REM "98644A DCA0REM serial"
-#define DIO_ID_DCA1     0x42 /* 98644A serial */
-#define DIO_DESC_DCA1 "98644A DCA1 serial"
-#define DIO_ID_DCA1REM  0xc2 /* 98644A serial */
-#define DIO_DESC_DCA1REM "98644A DCA1REM serial"
-#define DIO_ID_DCM      0x05 /* 98642A serial MUX */
-#define DIO_DESC_DCM "98642A DCM serial MUX"
-#define DIO_ID_DCMREM   0x85 /* 98642A serial MUX */
-#define DIO_DESC_DCMREM "98642A DCMREM serial MUX"
-#define DIO_ID_LAN      0x15 /* 98643A LAN */
-#define DIO_DESC_LAN "98643A LANCE ethernet"
-#define DIO_ID_FHPIB    0x08 /* 98625A/98625B fast HP-IB */
-#define DIO_DESC_FHPIB "98625A/98625B fast HPIB"
-#define DIO_ID_NHPIB    0x01 /* 98624A HP-IB (normal ie slow) */
-#define DIO_DESC_NHPIB "98624A HPIB"
-#define DIO_ID_SCSI0    0x07 /* 98265A SCSI */
-#define DIO_DESC_SCSI0 "98265A SCSI0"
-#define DIO_ID_SCSI1    0x27 /* ditto */
-#define DIO_DESC_SCSI1 "98265A SCSI1"
-#define DIO_ID_SCSI2    0x47 /* ditto */
-#define DIO_DESC_SCSI2 "98265A SCSI2"
-#define DIO_ID_SCSI3    0x67 /* ditto */
-#define DIO_DESC_SCSI3 "98265A SCSI3"
-#define DIO_ID_FBUFFER  0x39 /* framebuffer: flavour is distinguished by secondary ID */
-#define DIO_DESC_FBUFFER "bitmapped display"
-/* the NetBSD kernel source is a bit unsure as to what these next IDs actually do :-> */
-#define DIO_ID_MISC0    0x03 /* 98622A */
-#define DIO_DESC_MISC0 "98622A"
-#define DIO_ID_MISC1    0x04 /* 98623A */
-#define DIO_DESC_MISC1 "98623A"
-#define DIO_ID_PARALLEL 0x06 /* internal parallel */
-#define DIO_DESC_PARALLEL "internal parallel"
-#define DIO_ID_MISC2    0x09 /* 98287A keyboard */
-#define DIO_DESC_MISC2 "98287A keyboard"
-#define DIO_ID_MISC3    0x0a /* HP98635A FP accelerator */
-#define DIO_DESC_MISC3 "HP98635A FP accelerator"
-#define DIO_ID_MISC4    0x0b /* timer */
-#define DIO_DESC_MISC4 "timer"
-#define DIO_ID_MISC5    0x12 /* 98640A */
-#define DIO_DESC_MISC5 "98640A"
-#define DIO_ID_MISC6    0x16 /* 98659A */
-#define DIO_DESC_MISC6 "98659A"
-#define DIO_ID_MISC7    0x19 /* 237 display */
-#define DIO_DESC_MISC7 "237 display"
-#define DIO_ID_MISC8    0x1a /* quad-wide card */
-#define DIO_DESC_MISC8 "quad-wide card"
-#define DIO_ID_MISC9    0x1b /* 98253A */
-#define DIO_DESC_MISC9 "98253A"
-#define DIO_ID_MISC10   0x1c /* 98627A */
-#define DIO_DESC_MISC10 "98253A"
-#define DIO_ID_MISC11   0x1d /* 98633A */
-#define DIO_DESC_MISC11 "98633A"
-#define DIO_ID_MISC12   0x1e /* 98259A */
-#define DIO_DESC_MISC12 "98259A"
-#define DIO_ID_MISC13   0x1f /* 8741 */
-#define DIO_DESC_MISC13 "8741"
-#define DIO_ID_VME      0x31 /* 98577A VME adapter */
-#define DIO_DESC_VME "98577A VME adapter"
-#define DIO_ID_DCL      0x34 /* 98628A serial */
-#define DIO_DESC_DCL "98628A DCL serial"
-#define DIO_ID_DCLREM   0xb4 /* 98628A serial */
-#define DIO_DESC_DCLREM "98628A DCLREM serial"
-/* These are the secondary IDs for the framebuffers */
-#define DIO_ID2_GATORBOX    0x01 /* 98700/98710 "gatorbox" */
-#define DIO_DESC2_GATORBOX       "98700/98710 \"gatorbox\" display"
-#define DIO_ID2_TOPCAT      0x02 /* 98544/98545/98547 "topcat" */
-#define DIO_DESC2_TOPCAT         "98544/98545/98547 \"topcat\" display"
-#define DIO_ID2_RENAISSANCE 0x04 /* 98720/98721 "renaissance" */
-#define DIO_DESC2_RENAISSANCE    "98720/98721 \"renaissance\" display"
-#define DIO_ID2_LRCATSEYE   0x05 /* lowres "catseye" */
-#define DIO_DESC2_LRCATSEYE      "low-res catseye display"
-#define DIO_ID2_HRCCATSEYE  0x06 /* highres colour "catseye" */
-#define DIO_DESC2_HRCCATSEYE     "high-res color catseye display"
-#define DIO_ID2_HRMCATSEYE  0x07 /* highres mono "catseye" */
-#define DIO_DESC2_HRMCATSEYE     "high-res mono catseye display"
-#define DIO_ID2_DAVINCI     0x08 /* 98730/98731 "davinci" */
-#define DIO_DESC2_DAVINCI        "98730/98731 \"davinci\" display"
-#define DIO_ID2_XXXCATSEYE  0x09 /* "catseye" */
-#define DIO_DESC2_XXXCATSEYE     "catseye display"
-#define DIO_ID2_HYPERION    0x0e /* A1096A "hyperion" */
-#define DIO_DESC2_HYPERION       "A1096A \"hyperion\" display"
-#define DIO_ID2_XGENESIS    0x0b /* "x-genesis"; no NetBSD support */
-#define DIO_DESC2_XGENESIS       "\"x-genesis\" display"
-#define DIO_ID2_TIGER       0x0c /* "tiger"; no NetBSD support */
-#define DIO_DESC2_TIGER          "\"tiger\" display"
-#define DIO_ID2_YGENESIS    0x0d /* "y-genesis"; no NetBSD support */
-#define DIO_DESC2_YGENESIS       "\"y-genesis\" display"
-/* if you add new IDs then you should tell dio.c about them so it can
- * identify them...
- */
-
-extern int dio_find(int deviceid);
-extern unsigned long dio_scodetophysaddr(int scode);
-extern int dio_create_sysfs_dev_files(struct dio_dev *);
-
-/* New-style probing */
-extern int dio_register_driver(struct dio_driver *);
-extern void dio_unregister_driver(struct dio_driver *);
-extern const struct dio_device_id *dio_match_device(const struct dio_device_id *ids, const struct dio_dev *z);
-static inline struct dio_driver *dio_dev_driver(const struct dio_dev *d)
-{
-    return d->driver;
-}
-
-#define dio_resource_start(d) ((d)->resource.start)
-#define dio_resource_end(d)   ((d)->resource.end)
-#define dio_resource_len(d)   (resource_size(&(d)->resource))
-#define dio_resource_flags(d) ((d)->resource.flags)
-
-#define dio_request_device(d, name) \
-    request_mem_region(dio_resource_start(d), dio_resource_len(d), name)
-#define dio_release_device(d) \
-    release_mem_region(dio_resource_start(d), dio_resource_len(d))
-
-/* Similar to the helpers above, these manipulate per-dio_dev
- * driver-specific data.  They are really just a wrapper around
- * the generic device structure functions of these calls.
- */
-static inline void *dio_get_drvdata (struct dio_dev *d)
-{
-	return dev_get_drvdata(&d->dev);
-}
-
-static inline void dio_set_drvdata (struct dio_dev *d, void *data)
-{
-	dev_set_drvdata(&d->dev, data);
-}
-
-#endif /* __KERNEL__ */
-#endif /* ndef _LINUX_DIO_H */
diff --git a/ANDROID_3.4.5/include/linux/dirent.h b/ANDROID_3.4.5/include/linux/dirent.h
deleted file mode 100644
index f072fb8d..00000000
--- a/ANDROID_3.4.5/include/linux/dirent.h
+++ /dev/null
@@ -1,12 +0,0 @@
-#ifndef _LINUX_DIRENT_H
-#define _LINUX_DIRENT_H
-
-struct linux_dirent64 {
-	u64		d_ino;
-	s64		d_off;
-	unsigned short	d_reclen;
-	unsigned char	d_type;
-	char		d_name[0];
-};
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/dlm.h b/ANDROID_3.4.5/include/linux/dlm.h
deleted file mode 100644
index 6c7f6e95..00000000
--- a/ANDROID_3.4.5/include/linux/dlm.h
+++ /dev/null
@@ -1,233 +0,0 @@
-/******************************************************************************
-*******************************************************************************
-**
-**  Copyright (C) Sistina Software, Inc.  1997-2003  All rights reserved.
-**  Copyright (C) 2004-2011 Red Hat, Inc.  All rights reserved.
-**
-**  This copyrighted material is made available to anyone wishing to use,
-**  modify, copy, or redistribute it subject to the terms and conditions
-**  of the GNU General Public License v.2.
-**
-*******************************************************************************
-******************************************************************************/
-
-#ifndef __DLM_DOT_H__
-#define __DLM_DOT_H__
-
-/*
- * Interface to Distributed Lock Manager (DLM)
- * routines and structures to use DLM lockspaces
- */
-
-/* Lock levels and flags are here */
-#include <linux/dlmconstants.h>
-#include <linux/types.h>
-
-typedef void dlm_lockspace_t;
-
-/*
- * Lock status block
- *
- * Use this structure to specify the contents of the lock value block.  For a
- * conversion request, this structure is used to specify the lock ID of the
- * lock.  DLM writes the status of the lock request and the lock ID assigned
- * to the request in the lock status block.
- *
- * sb_lkid: the returned lock ID.  It is set on new (non-conversion) requests.
- * It is available when dlm_lock returns.
- *
- * sb_lvbptr: saves or returns the contents of the lock's LVB according to rules
- * shown for the DLM_LKF_VALBLK flag.
- *
- * sb_flags: DLM_SBF_DEMOTED is returned if in the process of promoting a lock,
- * it was first demoted to NL to avoid conversion deadlock.
- * DLM_SBF_VALNOTVALID is returned if the resource's LVB is marked invalid.
- *
- * sb_status: the returned status of the lock request set prior to AST
- * execution.  Possible return values:
- *
- * 0 if lock request was successful
- * -EAGAIN if request would block and is flagged DLM_LKF_NOQUEUE
- * -DLM_EUNLOCK if unlock request was successful
- * -DLM_ECANCEL if a cancel completed successfully
- * -EDEADLK if a deadlock was detected
- * -ETIMEDOUT if the lock request was canceled due to a timeout
- */
-
-#define DLM_SBF_DEMOTED		0x01
-#define DLM_SBF_VALNOTVALID	0x02
-#define DLM_SBF_ALTMODE		0x04
-
-struct dlm_lksb {
-	int 	 sb_status;
-	__u32	 sb_lkid;
-	char 	 sb_flags;
-	char *	 sb_lvbptr;
-};
-
-/* dlm_new_lockspace() flags */
-
-#define DLM_LSFL_NODIR		0x00000001
-#define DLM_LSFL_TIMEWARN	0x00000002
-#define DLM_LSFL_FS     	0x00000004
-#define DLM_LSFL_NEWEXCL     	0x00000008
-
-#ifdef __KERNEL__
-
-struct dlm_slot {
-	int nodeid; /* 1 to MAX_INT */
-	int slot;   /* 1 to MAX_INT */
-};
-
-/*
- * recover_prep: called before the dlm begins lock recovery.
- *   Notfies lockspace user that locks from failed members will be granted.
- * recover_slot: called after recover_prep and before recover_done.
- *   Identifies a failed lockspace member.
- * recover_done: called after the dlm completes lock recovery.
- *   Identifies lockspace members and lockspace generation number.
- */
-
-struct dlm_lockspace_ops {
-	void (*recover_prep) (void *ops_arg);
-	void (*recover_slot) (void *ops_arg, struct dlm_slot *slot);
-	void (*recover_done) (void *ops_arg, struct dlm_slot *slots,
-			      int num_slots, int our_slot, uint32_t generation);
-};
-
-/*
- * dlm_new_lockspace
- *
- * Create/join a lockspace.
- *
- * name: lockspace name, null terminated, up to DLM_LOCKSPACE_LEN (not
- *   including terminating null).
- *
- * cluster: cluster name, null terminated, up to DLM_LOCKSPACE_LEN (not
- *   including terminating null).  Optional.  When cluster is null, it
- *   is not used.  When set, dlm_new_lockspace() returns -EBADR if cluster
- *   is not equal to the dlm cluster name.
- *
- * flags:
- * DLM_LSFL_NODIR
- *   The dlm should not use a resource directory, but statically assign
- *   resource mastery to nodes based on the name hash that is otherwise
- *   used to select the directory node.  Must be the same on all nodes.
- * DLM_LSFL_TIMEWARN
- *   The dlm should emit netlink messages if locks have been waiting
- *   for a configurable amount of time.  (Unused.)
- * DLM_LSFL_FS
- *   The lockspace user is in the kernel (i.e. filesystem).  Enables
- *   direct bast/cast callbacks.
- * DLM_LSFL_NEWEXCL
- *   dlm_new_lockspace() should return -EEXIST if the lockspace exists.
- *
- * lvblen: length of lvb in bytes.  Must be multiple of 8.
- *   dlm_new_lockspace() returns an error if this does not match
- *   what other nodes are using.
- *
- * ops: callbacks that indicate lockspace recovery points so the
- *   caller can coordinate its recovery and know lockspace members.
- *   This is only used by the initial dlm_new_lockspace() call.
- *   Optional.
- *
- * ops_arg: arg for ops callbacks.
- *
- * ops_result: tells caller if the ops callbacks (if provided) will
- *   be used or not.  0: will be used, -EXXX will not be used.
- *   -EOPNOTSUPP: the dlm does not have recovery_callbacks enabled.
- *
- * lockspace: handle for dlm functions
- */
-
-int dlm_new_lockspace(const char *name, const char *cluster,
-		      uint32_t flags, int lvblen,
-		      const struct dlm_lockspace_ops *ops, void *ops_arg,
-		      int *ops_result, dlm_lockspace_t **lockspace);
-
-/*
- * dlm_release_lockspace
- *
- * Stop a lockspace.
- */
-
-int dlm_release_lockspace(dlm_lockspace_t *lockspace, int force);
-
-/*
- * dlm_lock
- *
- * Make an asyncronous request to acquire or convert a lock on a named
- * resource.
- *
- * lockspace: context for the request
- * mode: the requested mode of the lock (DLM_LOCK_)
- * lksb: lock status block for input and async return values
- * flags: input flags (DLM_LKF_)
- * name: name of the resource to lock, can be binary
- * namelen: the length in bytes of the resource name (MAX_RESNAME_LEN)
- * parent: the lock ID of a parent lock or 0 if none
- * lockast: function DLM executes when it completes processing the request
- * astarg: argument passed to lockast and bast functions
- * bast: function DLM executes when this lock later blocks another request
- *
- * Returns:
- * 0 if request is successfully queued for processing
- * -EINVAL if any input parameters are invalid
- * -EAGAIN if request would block and is flagged DLM_LKF_NOQUEUE
- * -ENOMEM if there is no memory to process request
- * -ENOTCONN if there is a communication error
- *
- * If the call to dlm_lock returns an error then the operation has failed and
- * the AST routine will not be called.  If dlm_lock returns 0 it is still
- * possible that the lock operation will fail. The AST routine will be called
- * when the locking is complete and the status is returned in the lksb.
- *
- * If the AST routines or parameter are passed to a conversion operation then
- * they will overwrite those values that were passed to a previous dlm_lock
- * call.
- *
- * AST routines should not block (at least not for long), but may make
- * any locking calls they please.
- */
-
-int dlm_lock(dlm_lockspace_t *lockspace,
-	     int mode,
-	     struct dlm_lksb *lksb,
-	     uint32_t flags,
-	     void *name,
-	     unsigned int namelen,
-	     uint32_t parent_lkid,
-	     void (*lockast) (void *astarg),
-	     void *astarg,
-	     void (*bast) (void *astarg, int mode));
-
-/*
- * dlm_unlock
- *
- * Asynchronously release a lock on a resource.  The AST routine is called
- * when the resource is successfully unlocked.
- *
- * lockspace: context for the request
- * lkid: the lock ID as returned in the lksb
- * flags: input flags (DLM_LKF_)
- * lksb: if NULL the lksb parameter passed to last lock request is used
- * astarg: the arg used with the completion ast for the unlock
- *
- * Returns:
- * 0 if request is successfully queued for processing
- * -EINVAL if any input parameters are invalid
- * -ENOTEMPTY if the lock still has sublocks
- * -EBUSY if the lock is waiting for a remote lock operation
- * -ENOTCONN if there is a communication error
- */
-
-int dlm_unlock(dlm_lockspace_t *lockspace,
-	       uint32_t lkid,
-	       uint32_t flags,
-	       struct dlm_lksb *lksb,
-	       void *astarg);
-
-#endif				/* __KERNEL__ */
-
-#endif				/* __DLM_DOT_H__ */
-
diff --git a/ANDROID_3.4.5/include/linux/dlm_device.h b/ANDROID_3.4.5/include/linux/dlm_device.h
deleted file mode 100644
index 3060783c..00000000
--- a/ANDROID_3.4.5/include/linux/dlm_device.h
+++ /dev/null
@@ -1,108 +0,0 @@
-/******************************************************************************
-*******************************************************************************
-**
-**  Copyright (C) Sistina Software, Inc.  1997-2003  All rights reserved.
-**  Copyright (C) 2004-2007 Red Hat, Inc.  All rights reserved.
-**
-**  This copyrighted material is made available to anyone wishing to use,
-**  modify, copy, or redistribute it subject to the terms and conditions
-**  of the GNU General Public License v.2.
-**
-*******************************************************************************
-******************************************************************************/
-
-#ifndef _LINUX_DLM_DEVICE_H
-#define _LINUX_DLM_DEVICE_H
-
-/* This is the device interface for dlm, most users will use a library
- * interface.
- */
-
-#include <linux/dlm.h>
-#include <linux/types.h>
-
-#define DLM_USER_LVB_LEN	32
-
-/* Version of the device interface */
-#define DLM_DEVICE_VERSION_MAJOR 6
-#define DLM_DEVICE_VERSION_MINOR 0
-#define DLM_DEVICE_VERSION_PATCH 1
-
-/* struct passed to the lock write */
-struct dlm_lock_params {
-	__u8 mode;
-	__u8 namelen;
-	__u16 unused;
-	__u32 flags;
-	__u32 lkid;
-	__u32 parent;
-	__u64 xid;
-	__u64 timeout;
-	void __user *castparam;
-	void __user *castaddr;
-	void __user *bastparam;
-	void __user *bastaddr;
-	struct dlm_lksb __user *lksb;
-	char lvb[DLM_USER_LVB_LEN];
-	char name[0];
-};
-
-struct dlm_lspace_params {
-	__u32 flags;
-	__u32 minor;
-	char name[0];
-};
-
-struct dlm_purge_params {
-	__u32 nodeid;
-	__u32 pid;
-};
-
-struct dlm_write_request {
-	__u32 version[3];
-	__u8 cmd;
-	__u8 is64bit;
-	__u8 unused[2];
-
-	union  {
-		struct dlm_lock_params   lock;
-		struct dlm_lspace_params lspace;
-		struct dlm_purge_params  purge;
-	} i;
-};
-
-struct dlm_device_version {
-	__u32 version[3];
-};
-
-/* struct read from the "device" fd,
-   consists mainly of userspace pointers for the library to use */
-
-struct dlm_lock_result {
-	__u32 version[3];
-	__u32 length;
-	void __user * user_astaddr;
-	void __user * user_astparam;
-	struct dlm_lksb __user * user_lksb;
-	struct dlm_lksb lksb;
-	__u8 bast_mode;
-	__u8 unused[3];
-	/* Offsets may be zero if no data is present */
-	__u32 lvb_offset;
-};
-
-/* Commands passed to the device */
-#define DLM_USER_LOCK         1
-#define DLM_USER_UNLOCK       2
-#define DLM_USER_QUERY        3
-#define DLM_USER_CREATE_LOCKSPACE  4
-#define DLM_USER_REMOVE_LOCKSPACE  5
-#define DLM_USER_PURGE        6
-#define DLM_USER_DEADLOCK     7
-
-/* Lockspace flags */
-#define DLM_USER_LSFLG_AUTOFREE   1
-#define DLM_USER_LSFLG_FORCEFREE  2
-
-#endif
-
diff --git a/ANDROID_3.4.5/include/linux/dlm_netlink.h b/ANDROID_3.4.5/include/linux/dlm_netlink.h
deleted file mode 100644
index 647c8ef2..00000000
--- a/ANDROID_3.4.5/include/linux/dlm_netlink.h
+++ /dev/null
@@ -1,58 +0,0 @@
-/*
- * Copyright (C) 2007 Red Hat, Inc.  All rights reserved.
- *
- * This copyrighted material is made available to anyone wishing to use,
- * modify, copy, or redistribute it subject to the terms and conditions
- * of the GNU General Public License v.2.
- */
-
-#ifndef _DLM_NETLINK_H
-#define _DLM_NETLINK_H
-
-#include <linux/types.h>
-
-enum {
-	DLM_STATUS_WAITING = 1,
-	DLM_STATUS_GRANTED = 2,
-	DLM_STATUS_CONVERT = 3,
-};
-
-#define DLM_LOCK_DATA_VERSION 1
-
-struct dlm_lock_data {
-	__u16 version;
-	__u32 lockspace_id;
-	int nodeid;
-	int ownpid;
-	__u32 id;
-	__u32 remid;
-	__u64 xid;
-	__s8 status;
-	__s8 grmode;
-	__s8 rqmode;
-	unsigned long timestamp;
-	int resource_namelen;
-	char resource_name[DLM_RESNAME_MAXLEN];
-};
-
-enum {
-	DLM_CMD_UNSPEC = 0,
-	DLM_CMD_HELLO,		/* user->kernel */
-	DLM_CMD_TIMEOUT,	/* kernel->user */
-	__DLM_CMD_MAX,
-};
-
-#define DLM_CMD_MAX (__DLM_CMD_MAX - 1)
-
-enum {
-	DLM_TYPE_UNSPEC = 0,
-	DLM_TYPE_LOCK,
-	__DLM_TYPE_MAX,
-};
-
-#define DLM_TYPE_MAX (__DLM_TYPE_MAX - 1)
-
-#define DLM_GENL_VERSION 0x1
-#define DLM_GENL_NAME "DLM"
-
-#endif /* _DLM_NETLINK_H */
diff --git a/ANDROID_3.4.5/include/linux/dlm_plock.h b/ANDROID_3.4.5/include/linux/dlm_plock.h
deleted file mode 100644
index 3b1cc1be..00000000
--- a/ANDROID_3.4.5/include/linux/dlm_plock.h
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- * Copyright (C) 2005-2008 Red Hat, Inc.  All rights reserved.
- *
- * This copyrighted material is made available to anyone wishing to use,
- * modify, copy, or redistribute it subject to the terms and conditions
- * of the GNU General Public License v.2.
- */
-
-#ifndef __DLM_PLOCK_DOT_H__
-#define __DLM_PLOCK_DOT_H__
-
-#include <linux/types.h>
-
-#define DLM_PLOCK_MISC_NAME		"dlm_plock"
-
-#define DLM_PLOCK_VERSION_MAJOR	1
-#define DLM_PLOCK_VERSION_MINOR	2
-#define DLM_PLOCK_VERSION_PATCH	0
-
-enum {
-	DLM_PLOCK_OP_LOCK = 1,
-	DLM_PLOCK_OP_UNLOCK,
-	DLM_PLOCK_OP_GET,
-};
-
-#define DLM_PLOCK_FL_CLOSE 1
-
-struct dlm_plock_info {
-	__u32 version[3];
-	__u8 optype;
-	__u8 ex;
-	__u8 wait;
-	__u8 flags;
-	__u32 pid;
-	__s32 nodeid;
-	__s32 rv;
-	__u32 fsid;
-	__u64 number;
-	__u64 start;
-	__u64 end;
-	__u64 owner;
-};
-
-#ifdef __KERNEL__
-int dlm_posix_lock(dlm_lockspace_t *lockspace, u64 number, struct file *file,
-		int cmd, struct file_lock *fl);
-int dlm_posix_unlock(dlm_lockspace_t *lockspace, u64 number, struct file *file,
-		struct file_lock *fl);
-int dlm_posix_get(dlm_lockspace_t *lockspace, u64 number, struct file *file,
-		struct file_lock *fl);
-#endif /* __KERNEL__ */
-
-#endif
-
diff --git a/ANDROID_3.4.5/include/linux/dlmconstants.h b/ANDROID_3.4.5/include/linux/dlmconstants.h
deleted file mode 100644
index 47bf08dc..00000000
--- a/ANDROID_3.4.5/include/linux/dlmconstants.h
+++ /dev/null
@@ -1,163 +0,0 @@
-/******************************************************************************
-*******************************************************************************
-**
-**  Copyright (C) Sistina Software, Inc.  1997-2003  All rights reserved.
-**  Copyright (C) 2004-2007 Red Hat, Inc.  All rights reserved.
-**
-**  This copyrighted material is made available to anyone wishing to use,
-**  modify, copy, or redistribute it subject to the terms and conditions
-**  of the GNU General Public License v.2.
-**
-*******************************************************************************
-******************************************************************************/
-
-#ifndef __DLMCONSTANTS_DOT_H__
-#define __DLMCONSTANTS_DOT_H__
-
-/*
- * Constants used by DLM interface.
- */
-
-#define DLM_LOCKSPACE_LEN       64
-#define DLM_RESNAME_MAXLEN      64
-
-
-/*
- * Lock Modes
- */
-
-#define DLM_LOCK_IV		(-1)	/* invalid */
-#define DLM_LOCK_NL		0	/* null */
-#define DLM_LOCK_CR		1	/* concurrent read */
-#define DLM_LOCK_CW		2	/* concurrent write */
-#define DLM_LOCK_PR		3	/* protected read */
-#define DLM_LOCK_PW		4	/* protected write */
-#define DLM_LOCK_EX		5	/* exclusive */
-
-
-/*
- * Flags to dlm_lock
- *
- * DLM_LKF_NOQUEUE
- *
- * Do not queue the lock request on the wait queue if it cannot be granted
- * immediately.  If the lock cannot be granted because of this flag, DLM will
- * either return -EAGAIN from the dlm_lock call or will return 0 from
- * dlm_lock and -EAGAIN in the lock status block when the AST is executed.
- *
- * DLM_LKF_CANCEL
- *
- * Used to cancel a pending lock request or conversion.  A converting lock is
- * returned to its previously granted mode.
- *
- * DLM_LKF_CONVERT
- *
- * Indicates a lock conversion request.  For conversions the name and namelen
- * are ignored and the lock ID in the LKSB is used to identify the lock.
- *
- * DLM_LKF_VALBLK
- *
- * Requests DLM to return the current contents of the lock value block in the
- * lock status block.  When this flag is set in a lock conversion from PW or EX
- * modes, DLM assigns the value specified in the lock status block to the lock
- * value block of the lock resource.  The LVB is a DLM_LVB_LEN size array
- * containing application-specific information.
- *
- * DLM_LKF_QUECVT
- *
- * Force a conversion request to be queued, even if it is compatible with
- * the granted modes of other locks on the same resource.
- *
- * DLM_LKF_IVVALBLK
- *
- * Invalidate the lock value block.
- *
- * DLM_LKF_CONVDEADLK
- *
- * Allows the dlm to resolve conversion deadlocks internally by demoting the
- * granted mode of a converting lock to NL.  The DLM_SBF_DEMOTED flag is
- * returned for a conversion that's been effected by this.
- *
- * DLM_LKF_PERSISTENT
- *
- * Only relevant to locks originating in userspace.  A persistent lock will not
- * be removed if the process holding the lock exits.
- *
- * DLM_LKF_NODLCKWT
- *
- * Do not cancel the lock if it gets into conversion deadlock.
- * Exclude this lock from being monitored due to DLM_LSFL_TIMEWARN.
- *
- * DLM_LKF_NODLCKBLK
- *
- * net yet implemented
- *
- * DLM_LKF_EXPEDITE
- *
- * Used only with new requests for NL mode locks.  Tells the lock manager
- * to grant the lock, ignoring other locks in convert and wait queues.
- *
- * DLM_LKF_NOQUEUEBAST
- *
- * Send blocking AST's before returning -EAGAIN to the caller.  It is only
- * used along with the NOQUEUE flag.  Blocking AST's are not sent for failed
- * NOQUEUE requests otherwise.
- *
- * DLM_LKF_HEADQUE
- *
- * Add a lock to the head of the convert or wait queue rather than the tail.
- *
- * DLM_LKF_NOORDER
- *
- * Disregard the standard grant order rules and grant a lock as soon as it
- * is compatible with other granted locks.
- *
- * DLM_LKF_ORPHAN
- *
- * not yet implemented
- *
- * DLM_LKF_ALTPR
- *
- * If the requested mode cannot be granted immediately, try to grant the lock
- * in PR mode instead.  If this alternate mode is granted instead of the
- * requested mode, DLM_SBF_ALTMODE is returned in the lksb.
- *
- * DLM_LKF_ALTCW
- *
- * The same as ALTPR, but the alternate mode is CW.
- *
- * DLM_LKF_FORCEUNLOCK
- *
- * Unlock the lock even if it is converting or waiting or has sublocks.
- * Only really for use by the userland device.c code.
- *
- */
-
-#define DLM_LKF_NOQUEUE		0x00000001
-#define DLM_LKF_CANCEL		0x00000002
-#define DLM_LKF_CONVERT		0x00000004
-#define DLM_LKF_VALBLK		0x00000008
-#define DLM_LKF_QUECVT		0x00000010
-#define DLM_LKF_IVVALBLK	0x00000020
-#define DLM_LKF_CONVDEADLK	0x00000040
-#define DLM_LKF_PERSISTENT	0x00000080
-#define DLM_LKF_NODLCKWT	0x00000100
-#define DLM_LKF_NODLCKBLK	0x00000200
-#define DLM_LKF_EXPEDITE	0x00000400
-#define DLM_LKF_NOQUEUEBAST	0x00000800
-#define DLM_LKF_HEADQUE		0x00001000
-#define DLM_LKF_NOORDER		0x00002000
-#define DLM_LKF_ORPHAN		0x00004000
-#define DLM_LKF_ALTPR		0x00008000
-#define DLM_LKF_ALTCW		0x00010000
-#define DLM_LKF_FORCEUNLOCK	0x00020000
-#define DLM_LKF_TIMEOUT		0x00040000
-
-/*
- * Some return codes that are not in errno.h
- */
-
-#define DLM_ECANCEL		0x10001
-#define DLM_EUNLOCK		0x10002
-
-#endif  /* __DLMCONSTANTS_DOT_H__ */
diff --git a/ANDROID_3.4.5/include/linux/dm-dirty-log.h b/ANDROID_3.4.5/include/linux/dm-dirty-log.h
deleted file mode 100644
index 7084503c..00000000
--- a/ANDROID_3.4.5/include/linux/dm-dirty-log.h
+++ /dev/null
@@ -1,146 +0,0 @@
-/*
- * Copyright (C) 2003 Sistina Software
- * Copyright (C) 2004-2008 Red Hat, Inc. All rights reserved.
- *
- * Device-Mapper dirty region log.
- *
- * This file is released under the LGPL.
- */
-
-#ifndef _LINUX_DM_DIRTY_LOG
-#define _LINUX_DM_DIRTY_LOG
-
-#ifdef __KERNEL__
-
-#include <linux/types.h>
-#include <linux/device-mapper.h>
-
-typedef sector_t region_t;
-
-struct dm_dirty_log_type;
-
-struct dm_dirty_log {
-	struct dm_dirty_log_type *type;
-	int (*flush_callback_fn)(struct dm_target *ti);
-	void *context;
-};
-
-struct dm_dirty_log_type {
-	const char *name;
-	struct module *module;
-
-	/* For internal device-mapper use */
-	struct list_head list;
-
-	int (*ctr)(struct dm_dirty_log *log, struct dm_target *ti,
-		   unsigned argc, char **argv);
-	void (*dtr)(struct dm_dirty_log *log);
-
-	/*
-	 * There are times when we don't want the log to touch
-	 * the disk.
-	 */
-	int (*presuspend)(struct dm_dirty_log *log);
-	int (*postsuspend)(struct dm_dirty_log *log);
-	int (*resume)(struct dm_dirty_log *log);
-
-	/*
-	 * Retrieves the smallest size of region that the log can
-	 * deal with.
-	 */
-	uint32_t (*get_region_size)(struct dm_dirty_log *log);
-
-	/*
-	 * A predicate to say whether a region is clean or not.
-	 * May block.
-	 */
-	int (*is_clean)(struct dm_dirty_log *log, region_t region);
-
-	/*
-	 *  Returns: 0, 1, -EWOULDBLOCK, < 0
-	 *
-	 * A predicate function to check the area given by
-	 * [sector, sector + len) is in sync.
-	 *
-	 * If -EWOULDBLOCK is returned the state of the region is
-	 * unknown, typically this will result in a read being
-	 * passed to a daemon to deal with, since a daemon is
-	 * allowed to block.
-	 */
-	int (*in_sync)(struct dm_dirty_log *log, region_t region,
-		       int can_block);
-
-	/*
-	 * Flush the current log state (eg, to disk).  This
-	 * function may block.
-	 */
-	int (*flush)(struct dm_dirty_log *log);
-
-	/*
-	 * Mark an area as clean or dirty.  These functions may
-	 * block, though for performance reasons blocking should
-	 * be extremely rare (eg, allocating another chunk of
-	 * memory for some reason).
-	 */
-	void (*mark_region)(struct dm_dirty_log *log, region_t region);
-	void (*clear_region)(struct dm_dirty_log *log, region_t region);
-
-	/*
-	 * Returns: <0 (error), 0 (no region), 1 (region)
-	 *
-	 * The mirrord will need perform recovery on regions of
-	 * the mirror that are in the NOSYNC state.  This
-	 * function asks the log to tell the caller about the
-	 * next region that this machine should recover.
-	 *
-	 * Do not confuse this function with 'in_sync()', one
-	 * tells you if an area is synchronised, the other
-	 * assigns recovery work.
-	*/
-	int (*get_resync_work)(struct dm_dirty_log *log, region_t *region);
-
-	/*
-	 * This notifies the log that the resync status of a region
-	 * has changed.  It also clears the region from the recovering
-	 * list (if present).
-	 */
-	void (*set_region_sync)(struct dm_dirty_log *log,
-				region_t region, int in_sync);
-
-	/*
-	 * Returns the number of regions that are in sync.
-	 */
-	region_t (*get_sync_count)(struct dm_dirty_log *log);
-
-	/*
-	 * Support function for mirror status requests.
-	 */
-	int (*status)(struct dm_dirty_log *log, status_type_t status_type,
-		      char *result, unsigned maxlen);
-
-	/*
-	 * is_remote_recovering is necessary for cluster mirroring. It provides
-	 * a way to detect recovery on another node, so we aren't writing
-	 * concurrently.  This function is likely to block (when a cluster log
-	 * is used).
-	 *
-	 * Returns: 0, 1
-	 */
-	int (*is_remote_recovering)(struct dm_dirty_log *log, region_t region);
-};
-
-int dm_dirty_log_type_register(struct dm_dirty_log_type *type);
-int dm_dirty_log_type_unregister(struct dm_dirty_log_type *type);
-
-/*
- * Make sure you use these two functions, rather than calling
- * type->constructor/destructor() directly.
- */
-struct dm_dirty_log *dm_dirty_log_create(const char *type_name,
-			struct dm_target *ti,
-			int (*flush_callback_fn)(struct dm_target *ti),
-			unsigned argc, char **argv);
-void dm_dirty_log_destroy(struct dm_dirty_log *log);
-
-#endif	/* __KERNEL__ */
-#endif	/* _LINUX_DM_DIRTY_LOG_H */
diff --git a/ANDROID_3.4.5/include/linux/dm-io.h b/ANDROID_3.4.5/include/linux/dm-io.h
deleted file mode 100644
index f4b0aa31..00000000
--- a/ANDROID_3.4.5/include/linux/dm-io.h
+++ /dev/null
@@ -1,84 +0,0 @@
-/*
- * Copyright (C) 2003 Sistina Software
- * Copyright (C) 2004 - 2008 Red Hat, Inc. All rights reserved.
- *
- * Device-Mapper low-level I/O.
- *
- * This file is released under the GPL.
- */
-
-#ifndef _LINUX_DM_IO_H
-#define _LINUX_DM_IO_H
-
-#ifdef __KERNEL__
-
-#include <linux/types.h>
-
-struct dm_io_region {
-	struct block_device *bdev;
-	sector_t sector;
-	sector_t count;		/* If this is zero the region is ignored. */
-};
-
-struct page_list {
-	struct page_list *next;
-	struct page *page;
-};
-
-typedef void (*io_notify_fn)(unsigned long error, void *context);
-
-enum dm_io_mem_type {
-	DM_IO_PAGE_LIST,/* Page list */
-	DM_IO_BVEC,	/* Bio vector */
-	DM_IO_VMA,	/* Virtual memory area */
-	DM_IO_KMEM,	/* Kernel memory */
-};
-
-struct dm_io_memory {
-	enum dm_io_mem_type type;
-
-	unsigned offset;
-
-	union {
-		struct page_list *pl;
-		struct bio_vec *bvec;
-		void *vma;
-		void *addr;
-	} ptr;
-};
-
-struct dm_io_notify {
-	io_notify_fn fn;	/* Callback for asynchronous requests */
-	void *context;		/* Passed to callback */
-};
-
-/*
- * IO request structure
- */
-struct dm_io_client;
-struct dm_io_request {
-	int bi_rw;			/* READ|WRITE - not READA */
-	struct dm_io_memory mem;	/* Memory to use for io */
-	struct dm_io_notify notify;	/* Synchronous if notify.fn is NULL */
-	struct dm_io_client *client;	/* Client memory handler */
-};
-
-/*
- * For async io calls, users can alternatively use the dm_io() function below
- * and dm_io_client_create() to create private mempools for the client.
- *
- * Create/destroy may block.
- */
-struct dm_io_client *dm_io_client_create(void);
-void dm_io_client_destroy(struct dm_io_client *client);
-
-/*
- * IO interface using private per-client pools.
- * Each bit in the optional 'sync_error_bits' bitset indicates whether an
- * error occurred doing io to the corresponding region.
- */
-int dm_io(struct dm_io_request *io_req, unsigned num_regions,
-	  struct dm_io_region *region, unsigned long *sync_error_bits);
-
-#endif	/* __KERNEL__ */
-#endif	/* _LINUX_DM_IO_H */
diff --git a/ANDROID_3.4.5/include/linux/dm-ioctl.h b/ANDROID_3.4.5/include/linux/dm-ioctl.h
deleted file mode 100644
index 75fd5573..00000000
--- a/ANDROID_3.4.5/include/linux/dm-ioctl.h
+++ /dev/null
@@ -1,337 +0,0 @@
-/*
- * Copyright (C) 2001 - 2003 Sistina Software (UK) Limited.
- * Copyright (C) 2004 - 2009 Red Hat, Inc. All rights reserved.
- *
- * This file is released under the LGPL.
- */
-
-#ifndef _LINUX_DM_IOCTL_V4_H
-#define _LINUX_DM_IOCTL_V4_H
-
-#include <linux/types.h>
-
-#define DM_DIR "mapper"		/* Slashes not supported */
-#define DM_CONTROL_NODE "control"
-#define DM_MAX_TYPE_NAME 16
-#define DM_NAME_LEN 128
-#define DM_UUID_LEN 129
-
-/*
- * A traditional ioctl interface for the device mapper.
- *
- * Each device can have two tables associated with it, an
- * 'active' table which is the one currently used by io passing
- * through the device, and an 'inactive' one which is a table
- * that is being prepared as a replacement for the 'active' one.
- *
- * DM_VERSION:
- * Just get the version information for the ioctl interface.
- *
- * DM_REMOVE_ALL:
- * Remove all dm devices, destroy all tables.  Only really used
- * for debug.
- *
- * DM_LIST_DEVICES:
- * Get a list of all the dm device names.
- *
- * DM_DEV_CREATE:
- * Create a new device, neither the 'active' or 'inactive' table
- * slots will be filled.  The device will be in suspended state
- * after creation, however any io to the device will get errored
- * since it will be out-of-bounds.
- *
- * DM_DEV_REMOVE:
- * Remove a device, destroy any tables.
- *
- * DM_DEV_RENAME:
- * Rename a device or set its uuid if none was previously supplied.
- *
- * DM_SUSPEND:
- * This performs both suspend and resume, depending which flag is
- * passed in.
- * Suspend: This command will not return until all pending io to
- * the device has completed.  Further io will be deferred until
- * the device is resumed.
- * Resume: It is no longer an error to issue this command on an
- * unsuspended device.  If a table is present in the 'inactive'
- * slot, it will be moved to the active slot, then the old table
- * from the active slot will be _destroyed_.  Finally the device
- * is resumed.
- *
- * DM_DEV_STATUS:
- * Retrieves the status for the table in the 'active' slot.
- *
- * DM_DEV_WAIT:
- * Wait for a significant event to occur to the device.  This
- * could either be caused by an event triggered by one of the
- * targets of the table in the 'active' slot, or a table change.
- *
- * DM_TABLE_LOAD:
- * Load a table into the 'inactive' slot for the device.  The
- * device does _not_ need to be suspended prior to this command.
- *
- * DM_TABLE_CLEAR:
- * Destroy any table in the 'inactive' slot (ie. abort).
- *
- * DM_TABLE_DEPS:
- * Return a set of device dependencies for the 'active' table.
- *
- * DM_TABLE_STATUS:
- * Return the targets status for the 'active' table.
- *
- * DM_TARGET_MSG:
- * Pass a message string to the target at a specific offset of a device.
- *
- * DM_DEV_SET_GEOMETRY:
- * Set the geometry of a device by passing in a string in this format:
- *
- * "cylinders heads sectors_per_track start_sector"
- *
- * Beware that CHS geometry is nearly obsolete and only provided
- * for compatibility with dm devices that can be booted by a PC
- * BIOS.  See struct hd_geometry for range limits.  Also note that
- * the geometry is erased if the device size changes.
- */
-
-/*
- * All ioctl arguments consist of a single chunk of memory, with
- * this structure at the start.  If a uuid is specified any
- * lookup (eg. for a DM_INFO) will be done on that, *not* the
- * name.
- */
-struct dm_ioctl {
-	/*
-	 * The version number is made up of three parts:
-	 * major - no backward or forward compatibility,
-	 * minor - only backwards compatible,
-	 * patch - both backwards and forwards compatible.
-	 *
-	 * All clients of the ioctl interface should fill in the
-	 * version number of the interface that they were
-	 * compiled with.
-	 *
-	 * All recognised ioctl commands (ie. those that don't
-	 * return -ENOTTY) fill out this field, even if the
-	 * command failed.
-	 */
-	__u32 version[3];	/* in/out */
-	__u32 data_size;	/* total size of data passed in
-				 * including this struct */
-
-	__u32 data_start;	/* offset to start of data
-				 * relative to start of this struct */
-
-	__u32 target_count;	/* in/out */
-	__s32 open_count;	/* out */
-	__u32 flags;		/* in/out */
-
-	/*
-	 * event_nr holds either the event number (input and output) or the
-	 * udev cookie value (input only).
-	 * The DM_DEV_WAIT ioctl takes an event number as input.
-	 * The DM_SUSPEND, DM_DEV_REMOVE and DM_DEV_RENAME ioctls
-	 * use the field as a cookie to return in the DM_COOKIE
-	 * variable with the uevents they issue.
-	 * For output, the ioctls return the event number, not the cookie.
-	 */
-	__u32 event_nr;      	/* in/out */
-	__u32 padding;
-
-	__u64 dev;		/* in/out */
-
-	char name[DM_NAME_LEN];	/* device name */
-	char uuid[DM_UUID_LEN];	/* unique identifier for
-				 * the block device */
-	char data[7];		/* padding or data */
-};
-
-/*
- * Used to specify tables.  These structures appear after the
- * dm_ioctl.
- */
-struct dm_target_spec {
-	__u64 sector_start;
-	__u64 length;
-	__s32 status;		/* used when reading from kernel only */
-
-	/*
-	 * Location of the next dm_target_spec.
-	 * - When specifying targets on a DM_TABLE_LOAD command, this value is
-	 *   the number of bytes from the start of the "current" dm_target_spec
-	 *   to the start of the "next" dm_target_spec.
-	 * - When retrieving targets on a DM_TABLE_STATUS command, this value
-	 *   is the number of bytes from the start of the first dm_target_spec
-	 *   (that follows the dm_ioctl struct) to the start of the "next"
-	 *   dm_target_spec.
-	 */
-	__u32 next;
-
-	char target_type[DM_MAX_TYPE_NAME];
-
-	/*
-	 * Parameter string starts immediately after this object.
-	 * Be careful to add padding after string to ensure correct
-	 * alignment of subsequent dm_target_spec.
-	 */
-};
-
-/*
- * Used to retrieve the target dependencies.
- */
-struct dm_target_deps {
-	__u32 count;	/* Array size */
-	__u32 padding;	/* unused */
-	__u64 dev[0];	/* out */
-};
-
-/*
- * Used to get a list of all dm devices.
- */
-struct dm_name_list {
-	__u64 dev;
-	__u32 next;		/* offset to the next record from
-				   the _start_ of this */
-	char name[0];
-};
-
-/*
- * Used to retrieve the target versions
- */
-struct dm_target_versions {
-        __u32 next;
-        __u32 version[3];
-
-        char name[0];
-};
-
-/*
- * Used to pass message to a target
- */
-struct dm_target_msg {
-	__u64 sector;	/* Device sector */
-
-	char message[0];
-};
-
-/*
- * If you change this make sure you make the corresponding change
- * to dm-ioctl.c:lookup_ioctl()
- */
-enum {
-	/* Top level cmds */
-	DM_VERSION_CMD = 0,
-	DM_REMOVE_ALL_CMD,
-	DM_LIST_DEVICES_CMD,
-
-	/* device level cmds */
-	DM_DEV_CREATE_CMD,
-	DM_DEV_REMOVE_CMD,
-	DM_DEV_RENAME_CMD,
-	DM_DEV_SUSPEND_CMD,
-	DM_DEV_STATUS_CMD,
-	DM_DEV_WAIT_CMD,
-
-	/* Table level cmds */
-	DM_TABLE_LOAD_CMD,
-	DM_TABLE_CLEAR_CMD,
-	DM_TABLE_DEPS_CMD,
-	DM_TABLE_STATUS_CMD,
-
-	/* Added later */
-	DM_LIST_VERSIONS_CMD,
-	DM_TARGET_MSG_CMD,
-	DM_DEV_SET_GEOMETRY_CMD
-};
-
-#define DM_IOCTL 0xfd
-
-#define DM_VERSION       _IOWR(DM_IOCTL, DM_VERSION_CMD, struct dm_ioctl)
-#define DM_REMOVE_ALL    _IOWR(DM_IOCTL, DM_REMOVE_ALL_CMD, struct dm_ioctl)
-#define DM_LIST_DEVICES  _IOWR(DM_IOCTL, DM_LIST_DEVICES_CMD, struct dm_ioctl)
-
-#define DM_DEV_CREATE    _IOWR(DM_IOCTL, DM_DEV_CREATE_CMD, struct dm_ioctl)
-#define DM_DEV_REMOVE    _IOWR(DM_IOCTL, DM_DEV_REMOVE_CMD, struct dm_ioctl)
-#define DM_DEV_RENAME    _IOWR(DM_IOCTL, DM_DEV_RENAME_CMD, struct dm_ioctl)
-#define DM_DEV_SUSPEND   _IOWR(DM_IOCTL, DM_DEV_SUSPEND_CMD, struct dm_ioctl)
-#define DM_DEV_STATUS    _IOWR(DM_IOCTL, DM_DEV_STATUS_CMD, struct dm_ioctl)
-#define DM_DEV_WAIT      _IOWR(DM_IOCTL, DM_DEV_WAIT_CMD, struct dm_ioctl)
-
-#define DM_TABLE_LOAD    _IOWR(DM_IOCTL, DM_TABLE_LOAD_CMD, struct dm_ioctl)
-#define DM_TABLE_CLEAR   _IOWR(DM_IOCTL, DM_TABLE_CLEAR_CMD, struct dm_ioctl)
-#define DM_TABLE_DEPS    _IOWR(DM_IOCTL, DM_TABLE_DEPS_CMD, struct dm_ioctl)
-#define DM_TABLE_STATUS  _IOWR(DM_IOCTL, DM_TABLE_STATUS_CMD, struct dm_ioctl)
-
-#define DM_LIST_VERSIONS _IOWR(DM_IOCTL, DM_LIST_VERSIONS_CMD, struct dm_ioctl)
-
-#define DM_TARGET_MSG	 _IOWR(DM_IOCTL, DM_TARGET_MSG_CMD, struct dm_ioctl)
-#define DM_DEV_SET_GEOMETRY	_IOWR(DM_IOCTL, DM_DEV_SET_GEOMETRY_CMD, struct dm_ioctl)
-
-#define DM_VERSION_MAJOR	4
-#define DM_VERSION_MINOR	22
-#define DM_VERSION_PATCHLEVEL	0
-#define DM_VERSION_EXTRA	"-ioctl (2011-10-19)"
-
-/* Status bits */
-#define DM_READONLY_FLAG	(1 << 0) /* In/Out */
-#define DM_SUSPEND_FLAG		(1 << 1) /* In/Out */
-#define DM_PERSISTENT_DEV_FLAG	(1 << 3) /* In */
-
-/*
- * Flag passed into ioctl STATUS command to get table information
- * rather than current status.
- */
-#define DM_STATUS_TABLE_FLAG	(1 << 4) /* In */
-
-/*
- * Flags that indicate whether a table is present in either of
- * the two table slots that a device has.
- */
-#define DM_ACTIVE_PRESENT_FLAG   (1 << 5) /* Out */
-#define DM_INACTIVE_PRESENT_FLAG (1 << 6) /* Out */
-
-/*
- * Indicates that the buffer passed in wasn't big enough for the
- * results.
- */
-#define DM_BUFFER_FULL_FLAG	(1 << 8) /* Out */
-
-/*
- * This flag is now ignored.
- */
-#define DM_SKIP_BDGET_FLAG	(1 << 9) /* In */
-
-/*
- * Set this to avoid attempting to freeze any filesystem when suspending.
- */
-#define DM_SKIP_LOCKFS_FLAG	(1 << 10) /* In */
-
-/*
- * Set this to suspend without flushing queued ios.
- */
-#define DM_NOFLUSH_FLAG		(1 << 11) /* In */
-
-/*
- * If set, any table information returned will relate to the inactive
- * table instead of the live one.  Always check DM_INACTIVE_PRESENT_FLAG
- * is set before using the data returned.
- */
-#define DM_QUERY_INACTIVE_TABLE_FLAG	(1 << 12) /* In */
-
-/*
- * If set, a uevent was generated for which the caller may need to wait.
- */
-#define DM_UEVENT_GENERATED_FLAG	(1 << 13) /* Out */
-
-/*
- * If set, rename changes the uuid not the name.  Only permitted
- * if no uuid was previously supplied: an existing uuid cannot be changed.
- */
-#define DM_UUID_FLAG			(1 << 14) /* In */
-
-/*
- * If set, all buffers are wiped after use. Use when sending
- * or requesting sensitive data such as an encryption key.
- */
-#define DM_SECURE_DATA_FLAG		(1 << 15) /* In */
-
-#endif				/* _LINUX_DM_IOCTL_H */
diff --git a/ANDROID_3.4.5/include/linux/dm-kcopyd.h b/ANDROID_3.4.5/include/linux/dm-kcopyd.h
deleted file mode 100644
index 47d9d376..00000000
--- a/ANDROID_3.4.5/include/linux/dm-kcopyd.h
+++ /dev/null
@@ -1,65 +0,0 @@
-/*
- * Copyright (C) 2001 - 2003 Sistina Software
- * Copyright (C) 2004 - 2008 Red Hat, Inc. All rights reserved.
- *
- * kcopyd provides a simple interface for copying an area of one
- * block-device to one or more other block-devices, either synchronous
- * or with an asynchronous completion notification.
- *
- * This file is released under the GPL.
- */
-
-#ifndef _LINUX_DM_KCOPYD_H
-#define _LINUX_DM_KCOPYD_H
-
-#ifdef __KERNEL__
-
-#include <linux/dm-io.h>
-
-/* FIXME: make this configurable */
-#define DM_KCOPYD_MAX_REGIONS 8
-
-#define DM_KCOPYD_IGNORE_ERROR 1
-
-/*
- * To use kcopyd you must first create a dm_kcopyd_client object.
- */
-struct dm_kcopyd_client;
-struct dm_kcopyd_client *dm_kcopyd_client_create(void);
-void dm_kcopyd_client_destroy(struct dm_kcopyd_client *kc);
-
-/*
- * Submit a copy job to kcopyd.  This is built on top of the
- * previous three fns.
- *
- * read_err is a boolean,
- * write_err is a bitset, with 1 bit for each destination region
- */
-typedef void (*dm_kcopyd_notify_fn)(int read_err, unsigned long write_err,
-				    void *context);
-
-int dm_kcopyd_copy(struct dm_kcopyd_client *kc, struct dm_io_region *from,
-		   unsigned num_dests, struct dm_io_region *dests,
-		   unsigned flags, dm_kcopyd_notify_fn fn, void *context);
-
-/*
- * Prepare a callback and submit it via the kcopyd thread.
- *
- * dm_kcopyd_prepare_callback allocates a callback structure and returns it.
- * It must not be called from interrupt context.
- * The returned value should be passed into dm_kcopyd_do_callback.
- *
- * dm_kcopyd_do_callback submits the callback.
- * It may be called from interrupt context.
- * The callback is issued from the kcopyd thread.
- */
-void *dm_kcopyd_prepare_callback(struct dm_kcopyd_client *kc,
-				 dm_kcopyd_notify_fn fn, void *context);
-void dm_kcopyd_do_callback(void *job, int read_err, unsigned long write_err);
-
-int dm_kcopyd_zero(struct dm_kcopyd_client *kc,
-		   unsigned num_dests, struct dm_io_region *dests,
-		   unsigned flags, dm_kcopyd_notify_fn fn, void *context);
-
-#endif	/* __KERNEL__ */
-#endif	/* _LINUX_DM_KCOPYD_H */
diff --git a/ANDROID_3.4.5/include/linux/dm-log-userspace.h b/ANDROID_3.4.5/include/linux/dm-log-userspace.h
deleted file mode 100644
index 0678c2ad..00000000
--- a/ANDROID_3.4.5/include/linux/dm-log-userspace.h
+++ /dev/null
@@ -1,416 +0,0 @@
-/*
- * Copyright (C) 2006-2009 Red Hat, Inc.
- *
- * This file is released under the LGPL.
- */
-
-#ifndef __DM_LOG_USERSPACE_H__
-#define __DM_LOG_USERSPACE_H__
-
-#include <linux/dm-ioctl.h> /* For DM_UUID_LEN */
-
-/*
- * The device-mapper userspace log module consists of a kernel component and
- * a user-space component.  The kernel component implements the API defined
- * in dm-dirty-log.h.  Its purpose is simply to pass the parameters and
- * return values of those API functions between kernel and user-space.
- *
- * Below are defined the 'request_types' - DM_ULOG_CTR, DM_ULOG_DTR, etc.
- * These request types represent the different functions in the device-mapper
- * dirty log API.  Each of these is described in more detail below.
- *
- * The user-space program must listen for requests from the kernel (representing
- * the various API functions) and process them.
- *
- * User-space begins by setting up the communication link (error checking
- * removed for clarity):
- *	fd = socket(PF_NETLINK, SOCK_DGRAM, NETLINK_CONNECTOR);
- *	addr.nl_family = AF_NETLINK;
- *	addr.nl_groups = CN_IDX_DM;
- *	addr.nl_pid = 0;
- *	r = bind(fd, (struct sockaddr *) &addr, sizeof(addr));
- *	opt = addr.nl_groups;
- *	setsockopt(fd, SOL_NETLINK, NETLINK_ADD_MEMBERSHIP, &opt, sizeof(opt));
- *
- * User-space will then wait to receive requests form the kernel, which it
- * will process as described below.  The requests are received in the form,
- * ((struct dm_ulog_request) + (additional data)).  Depending on the request
- * type, there may or may not be 'additional data'.  In the descriptions below,
- * you will see 'Payload-to-userspace' and 'Payload-to-kernel'.  The
- * 'Payload-to-userspace' is what the kernel sends in 'additional data' as
- * necessary parameters to complete the request.  The 'Payload-to-kernel' is
- * the 'additional data' returned to the kernel that contains the necessary
- * results of the request.  The 'data_size' field in the dm_ulog_request
- * structure denotes the availability and amount of payload data.
- */
-
-/*
- * DM_ULOG_CTR corresponds to (found in dm-dirty-log.h):
- * int (*ctr)(struct dm_dirty_log *log, struct dm_target *ti,
- *	      unsigned argc, char **argv);
- *
- * Payload-to-userspace:
- *	A single string containing all the argv arguments separated by ' 's
- * Payload-to-kernel:
- *	A NUL-terminated string that is the name of the device that is used
- *	as the backing store for the log data.  'dm_get_device' will be called
- *	on this device.  ('dm_put_device' will be called on this device
- *	automatically after calling DM_ULOG_DTR.)  If there is no device needed
- *	for log data, 'data_size' in the dm_ulog_request struct should be 0.
- *
- * The UUID contained in the dm_ulog_request structure is the reference that
- * will be used by all request types to a specific log.  The constructor must
- * record this association with the instance created.
- *
- * When the request has been processed, user-space must return the
- * dm_ulog_request to the kernel - setting the 'error' field, filling the
- * data field with the log device if necessary, and setting 'data_size'
- * appropriately.
- */
-#define DM_ULOG_CTR                    1
-
-/*
- * DM_ULOG_DTR corresponds to (found in dm-dirty-log.h):
- * void (*dtr)(struct dm_dirty_log *log);
- *
- * Payload-to-userspace:
- *	A single string containing all the argv arguments separated by ' 's
- * Payload-to-kernel:
- *	None.  ('data_size' in the dm_ulog_request struct should be 0.)
- *
- * The UUID contained in the dm_ulog_request structure is all that is
- * necessary to identify the log instance being destroyed.  There is no
- * payload data.
- *
- * When the request has been processed, user-space must return the
- * dm_ulog_request to the kernel - setting the 'error' field and clearing
- * 'data_size' appropriately.
- */
-#define DM_ULOG_DTR                    2
-
-/*
- * DM_ULOG_PRESUSPEND corresponds to (found in dm-dirty-log.h):
- * int (*presuspend)(struct dm_dirty_log *log);
- *
- * Payload-to-userspace:
- *	None.
- * Payload-to-kernel:
- *	None.
- *
- * The UUID contained in the dm_ulog_request structure is all that is
- * necessary to identify the log instance being presuspended.  There is no
- * payload data.
- *
- * When the request has been processed, user-space must return the
- * dm_ulog_request to the kernel - setting the 'error' field and
- * 'data_size' appropriately.
- */
-#define DM_ULOG_PRESUSPEND             3
-
-/*
- * DM_ULOG_POSTSUSPEND corresponds to (found in dm-dirty-log.h):
- * int (*postsuspend)(struct dm_dirty_log *log);
- *
- * Payload-to-userspace:
- *	None.
- * Payload-to-kernel:
- *	None.
- *
- * The UUID contained in the dm_ulog_request structure is all that is
- * necessary to identify the log instance being postsuspended.  There is no
- * payload data.
- *
- * When the request has been processed, user-space must return the
- * dm_ulog_request to the kernel - setting the 'error' field and
- * 'data_size' appropriately.
- */
-#define DM_ULOG_POSTSUSPEND            4
-
-/*
- * DM_ULOG_RESUME corresponds to (found in dm-dirty-log.h):
- * int (*resume)(struct dm_dirty_log *log);
- *
- * Payload-to-userspace:
- *	None.
- * Payload-to-kernel:
- *	None.
- *
- * The UUID contained in the dm_ulog_request structure is all that is
- * necessary to identify the log instance being resumed.  There is no
- * payload data.
- *
- * When the request has been processed, user-space must return the
- * dm_ulog_request to the kernel - setting the 'error' field and
- * 'data_size' appropriately.
- */
-#define DM_ULOG_RESUME                 5
-
-/*
- * DM_ULOG_GET_REGION_SIZE corresponds to (found in dm-dirty-log.h):
- * uint32_t (*get_region_size)(struct dm_dirty_log *log);
- *
- * Payload-to-userspace:
- *	None.
- * Payload-to-kernel:
- *	uint64_t - contains the region size
- *
- * The region size is something that was determined at constructor time.
- * It is returned in the payload area and 'data_size' is set to
- * reflect this.
- *
- * When the request has been processed, user-space must return the
- * dm_ulog_request to the kernel - setting the 'error' field appropriately.
- */
-#define DM_ULOG_GET_REGION_SIZE        6
-
-/*
- * DM_ULOG_IS_CLEAN corresponds to (found in dm-dirty-log.h):
- * int (*is_clean)(struct dm_dirty_log *log, region_t region);
- *
- * Payload-to-userspace:
- *	uint64_t - the region to get clean status on
- * Payload-to-kernel:
- *	int64_t  - 1 if clean, 0 otherwise
- *
- * Payload is sizeof(uint64_t) and contains the region for which the clean
- * status is being made.
- *
- * When the request has been processed, user-space must return the
- * dm_ulog_request to the kernel - filling the payload with 0 (not clean) or
- * 1 (clean), setting 'data_size' and 'error' appropriately.
- */
-#define DM_ULOG_IS_CLEAN               7
-
-/*
- * DM_ULOG_IN_SYNC corresponds to (found in dm-dirty-log.h):
- * int (*in_sync)(struct dm_dirty_log *log, region_t region,
- *		  int can_block);
- *
- * Payload-to-userspace:
- *	uint64_t - the region to get sync status on
- * Payload-to-kernel:
- *	int64_t - 1 if in-sync, 0 otherwise
- *
- * Exactly the same as 'is_clean' above, except this time asking "has the
- * region been recovered?" vs. "is the region not being modified?"
- */
-#define DM_ULOG_IN_SYNC                8
-
-/*
- * DM_ULOG_FLUSH corresponds to (found in dm-dirty-log.h):
- * int (*flush)(struct dm_dirty_log *log);
- *
- * Payload-to-userspace:
- *	None.
- * Payload-to-kernel:
- *	None.
- *
- * No incoming or outgoing payload.  Simply flush log state to disk.
- *
- * When the request has been processed, user-space must return the
- * dm_ulog_request to the kernel - setting the 'error' field and clearing
- * 'data_size' appropriately.
- */
-#define DM_ULOG_FLUSH                  9
-
-/*
- * DM_ULOG_MARK_REGION corresponds to (found in dm-dirty-log.h):
- * void (*mark_region)(struct dm_dirty_log *log, region_t region);
- *
- * Payload-to-userspace:
- *	uint64_t [] - region(s) to mark
- * Payload-to-kernel:
- *	None.
- *
- * Incoming payload contains the one or more regions to mark dirty.
- * The number of regions contained in the payload can be determined from
- * 'data_size/sizeof(uint64_t)'.
- *
- * When the request has been processed, user-space must return the
- * dm_ulog_request to the kernel - setting the 'error' field and clearing
- * 'data_size' appropriately.
- */
-#define DM_ULOG_MARK_REGION           10
-
-/*
- * DM_ULOG_CLEAR_REGION corresponds to (found in dm-dirty-log.h):
- * void (*clear_region)(struct dm_dirty_log *log, region_t region);
- *
- * Payload-to-userspace:
- *	uint64_t [] - region(s) to clear
- * Payload-to-kernel:
- *	None.
- *
- * Incoming payload contains the one or more regions to mark clean.
- * The number of regions contained in the payload can be determined from
- * 'data_size/sizeof(uint64_t)'.
- *
- * When the request has been processed, user-space must return the
- * dm_ulog_request to the kernel - setting the 'error' field and clearing
- * 'data_size' appropriately.
- */
-#define DM_ULOG_CLEAR_REGION          11
-
-/*
- * DM_ULOG_GET_RESYNC_WORK corresponds to (found in dm-dirty-log.h):
- * int (*get_resync_work)(struct dm_dirty_log *log, region_t *region);
- *
- * Payload-to-userspace:
- *	None.
- * Payload-to-kernel:
- *	{
- *		int64_t i; -- 1 if recovery necessary, 0 otherwise
- *		uint64_t r; -- The region to recover if i=1
- *	}
- * 'data_size' should be set appropriately.
- *
- * When the request has been processed, user-space must return the
- * dm_ulog_request to the kernel - setting the 'error' field appropriately.
- */
-#define DM_ULOG_GET_RESYNC_WORK       12
-
-/*
- * DM_ULOG_SET_REGION_SYNC corresponds to (found in dm-dirty-log.h):
- * void (*set_region_sync)(struct dm_dirty_log *log,
- *			   region_t region, int in_sync);
- *
- * Payload-to-userspace:
- *	{
- *		uint64_t - region to set sync state on
- *		int64_t  - 0 if not-in-sync, 1 if in-sync
- *	}
- * Payload-to-kernel:
- *	None.
- *
- * When the request has been processed, user-space must return the
- * dm_ulog_request to the kernel - setting the 'error' field and clearing
- * 'data_size' appropriately.
- */
-#define DM_ULOG_SET_REGION_SYNC       13
-
-/*
- * DM_ULOG_GET_SYNC_COUNT corresponds to (found in dm-dirty-log.h):
- * region_t (*get_sync_count)(struct dm_dirty_log *log);
- *
- * Payload-to-userspace:
- *	None.
- * Payload-to-kernel:
- *	uint64_t - the number of in-sync regions
- *
- * No incoming payload.  Kernel-bound payload contains the number of
- * regions that are in-sync (in a size_t).
- *
- * When the request has been processed, user-space must return the
- * dm_ulog_request to the kernel - setting the 'error' field and
- * 'data_size' appropriately.
- */
-#define DM_ULOG_GET_SYNC_COUNT        14
-
-/*
- * DM_ULOG_STATUS_INFO corresponds to (found in dm-dirty-log.h):
- * int (*status)(struct dm_dirty_log *log, STATUSTYPE_INFO,
- *		 char *result, unsigned maxlen);
- *
- * Payload-to-userspace:
- *	None.
- * Payload-to-kernel:
- *	Character string containing STATUSTYPE_INFO
- *
- * When the request has been processed, user-space must return the
- * dm_ulog_request to the kernel - setting the 'error' field and
- * 'data_size' appropriately.
- */
-#define DM_ULOG_STATUS_INFO           15
-
-/*
- * DM_ULOG_STATUS_TABLE corresponds to (found in dm-dirty-log.h):
- * int (*status)(struct dm_dirty_log *log, STATUSTYPE_TABLE,
- *		 char *result, unsigned maxlen);
- *
- * Payload-to-userspace:
- *	None.
- * Payload-to-kernel:
- *	Character string containing STATUSTYPE_TABLE
- *
- * When the request has been processed, user-space must return the
- * dm_ulog_request to the kernel - setting the 'error' field and
- * 'data_size' appropriately.
- */
-#define DM_ULOG_STATUS_TABLE          16
-
-/*
- * DM_ULOG_IS_REMOTE_RECOVERING corresponds to (found in dm-dirty-log.h):
- * int (*is_remote_recovering)(struct dm_dirty_log *log, region_t region);
- *
- * Payload-to-userspace:
- *	uint64_t - region to determine recovery status on
- * Payload-to-kernel:
- *	{
- *		int64_t is_recovering;  -- 0 if no, 1 if yes
- *		uint64_t in_sync_hint;  -- lowest region still needing resync
- *	}
- *
- * When the request has been processed, user-space must return the
- * dm_ulog_request to the kernel - setting the 'error' field and
- * 'data_size' appropriately.
- */
-#define DM_ULOG_IS_REMOTE_RECOVERING  17
-
-/*
- * (DM_ULOG_REQUEST_MASK & request_type) to get the request type
- *
- * Payload-to-userspace:
- *	A single string containing all the argv arguments separated by ' 's
- * Payload-to-kernel:
- *	None.  ('data_size' in the dm_ulog_request struct should be 0.)
- *
- * We are reserving 8 bits of the 32-bit 'request_type' field for the
- * various request types above.  The remaining 24-bits are currently
- * set to zero and are reserved for future use and compatibility concerns.
- *
- * User-space should always use DM_ULOG_REQUEST_TYPE to acquire the
- * request type from the 'request_type' field to maintain forward compatibility.
- */
-#define DM_ULOG_REQUEST_MASK 0xFF
-#define DM_ULOG_REQUEST_TYPE(request_type) \
-	(DM_ULOG_REQUEST_MASK & (request_type))
-
-/*
- * DM_ULOG_REQUEST_VERSION is incremented when there is a
- * change to the way information is passed between kernel
- * and userspace.  This could be a structure change of
- * dm_ulog_request or a change in the way requests are
- * issued/handled.  Changes are outlined here:
- *	version 1:  Initial implementation
- *	version 2:  DM_ULOG_CTR allowed to return a string containing a
- *	            device name that is to be registered with DM via
- *	            'dm_get_device'.
- */
-#define DM_ULOG_REQUEST_VERSION 2
-
-struct dm_ulog_request {
-	/*
-	 * The local unique identifier (luid) and the universally unique
-	 * identifier (uuid) are used to tie a request to a specific
-	 * mirror log.  A single machine log could probably make due with
-	 * just the 'luid', but a cluster-aware log must use the 'uuid' and
-	 * the 'luid'.  The uuid is what is required for node to node
-	 * communication concerning a particular log, but the 'luid' helps
-	 * differentiate between logs that are being swapped and have the
-	 * same 'uuid'.  (Think "live" and "inactive" device-mapper tables.)
-	 */
-	uint64_t luid;
-	char uuid[DM_UUID_LEN];
-	char padding[3];        /* Padding because DM_UUID_LEN = 129 */
-
-	uint32_t version;       /* See DM_ULOG_REQUEST_VERSION */
-	int32_t error;          /* Used to report back processing errors */
-
-	uint32_t seq;           /* Sequence number for request */
-	uint32_t request_type;  /* DM_ULOG_* defined above */
-	uint32_t data_size;     /* How much data (not including this struct) */
-
-	char data[0];
-};
-
-#endif /* __DM_LOG_USERSPACE_H__ */
diff --git a/ANDROID_3.4.5/include/linux/dm-region-hash.h b/ANDROID_3.4.5/include/linux/dm-region-hash.h
deleted file mode 100644
index 9e2a7a40..00000000
--- a/ANDROID_3.4.5/include/linux/dm-region-hash.h
+++ /dev/null
@@ -1,103 +0,0 @@
-/*
- * Copyright (C) 2003 Sistina Software Limited.
- * Copyright (C) 2004-2008 Red Hat, Inc. All rights reserved.
- *
- * Device-Mapper dirty region hash interface.
- *
- * This file is released under the GPL.
- */
-
-#ifndef DM_REGION_HASH_H
-#define DM_REGION_HASH_H
-
-#include <linux/dm-dirty-log.h>
-
-/*-----------------------------------------------------------------
- * Region hash
- *----------------------------------------------------------------*/
-struct dm_region_hash;
-struct dm_region;
-
-/*
- * States a region can have.
- */
-enum dm_rh_region_states {
-	DM_RH_CLEAN	 = 0x01,	/* No writes in flight. */
-	DM_RH_DIRTY	 = 0x02,	/* Writes in flight. */
-	DM_RH_NOSYNC	 = 0x04,	/* Out of sync. */
-	DM_RH_RECOVERING = 0x08,	/* Under resynchronization. */
-};
-
-/*
- * Region hash create/destroy.
- */
-struct bio_list;
-struct dm_region_hash *dm_region_hash_create(
-		void *context, void (*dispatch_bios)(void *context,
-						     struct bio_list *bios),
-		void (*wakeup_workers)(void *context),
-		void (*wakeup_all_recovery_waiters)(void *context),
-		sector_t target_begin, unsigned max_recovery,
-		struct dm_dirty_log *log, uint32_t region_size,
-		region_t nr_regions);
-void dm_region_hash_destroy(struct dm_region_hash *rh);
-
-struct dm_dirty_log *dm_rh_dirty_log(struct dm_region_hash *rh);
-
-/*
- * Conversion functions.
- */
-region_t dm_rh_bio_to_region(struct dm_region_hash *rh, struct bio *bio);
-sector_t dm_rh_region_to_sector(struct dm_region_hash *rh, region_t region);
-void *dm_rh_region_context(struct dm_region *reg);
-
-/*
- * Get region size and key (ie. number of the region).
- */
-sector_t dm_rh_get_region_size(struct dm_region_hash *rh);
-region_t dm_rh_get_region_key(struct dm_region *reg);
-
-/*
- * Get/set/update region state (and dirty log).
- *
- */
-int dm_rh_get_state(struct dm_region_hash *rh, region_t region, int may_block);
-void dm_rh_set_state(struct dm_region_hash *rh, region_t region,
-		     enum dm_rh_region_states state, int may_block);
-
-/* Non-zero errors_handled leaves the state of the region NOSYNC */
-void dm_rh_update_states(struct dm_region_hash *rh, int errors_handled);
-
-/* Flush the region hash and dirty log. */
-int dm_rh_flush(struct dm_region_hash *rh);
-
-/* Inc/dec pending count on regions. */
-void dm_rh_inc_pending(struct dm_region_hash *rh, struct bio_list *bios);
-void dm_rh_dec(struct dm_region_hash *rh, region_t region);
-
-/* Delay bios on regions. */
-void dm_rh_delay(struct dm_region_hash *rh, struct bio *bio);
-
-void dm_rh_mark_nosync(struct dm_region_hash *rh, struct bio *bio);
-
-/*
- * Region recovery control.
- */
-
-/* Prepare some regions for recovery by starting to quiesce them. */
-void dm_rh_recovery_prepare(struct dm_region_hash *rh);
-
-/* Try fetching a quiesced region for recovery. */
-struct dm_region *dm_rh_recovery_start(struct dm_region_hash *rh);
-
-/* Report recovery end on a region. */
-void dm_rh_recovery_end(struct dm_region *reg, int error);
-
-/* Returns number of regions with recovery work outstanding. */
-int dm_rh_recovery_in_flight(struct dm_region_hash *rh);
-
-/* Start/stop recovery. */
-void dm_rh_start_recovery(struct dm_region_hash *rh);
-void dm_rh_stop_recovery(struct dm_region_hash *rh);
-
-#endif /* DM_REGION_HASH_H */
diff --git a/ANDROID_3.4.5/include/linux/dm9000.h b/ANDROID_3.4.5/include/linux/dm9000.h
deleted file mode 100644
index 96e87693..00000000
--- a/ANDROID_3.4.5/include/linux/dm9000.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/* include/linux/dm9000.h
- *
- * Copyright (c) 2004 Simtec Electronics
- *   Ben Dooks <ben@simtec.co.uk>
- *
- * Header file for dm9000 platform data
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-#ifndef __DM9000_PLATFORM_DATA
-#define __DM9000_PLATFORM_DATA __FILE__
-
-/* IO control flags */
-
-#define DM9000_PLATF_8BITONLY	(0x0001)
-#define DM9000_PLATF_16BITONLY	(0x0002)
-#define DM9000_PLATF_32BITONLY	(0x0004)
-#define DM9000_PLATF_EXT_PHY	(0x0008)
-#define DM9000_PLATF_NO_EEPROM	(0x0010)
-#define DM9000_PLATF_SIMPLE_PHY (0x0020)  /* Use NSR to find LinkStatus */
-
-/* platform data for platform device structure's platform_data field */
-
-struct dm9000_plat_data {
-	unsigned int	flags;
-	unsigned char	dev_addr[6];
-
-	/* allow replacement IO routines */
-
-	void	(*inblk)(void __iomem *reg, void *data, int len);
-	void	(*outblk)(void __iomem *reg, void *data, int len);
-	void	(*dumpblk)(void __iomem *reg, int len);
-};
-
-#endif /* __DM9000_PLATFORM_DATA */
-
diff --git a/ANDROID_3.4.5/include/linux/dma-attrs.h b/ANDROID_3.4.5/include/linux/dma-attrs.h
deleted file mode 100644
index 547ab568..00000000
--- a/ANDROID_3.4.5/include/linux/dma-attrs.h
+++ /dev/null
@@ -1,77 +0,0 @@
-#ifndef _DMA_ATTR_H
-#define _DMA_ATTR_H
-
-#include <linux/bitmap.h>
-#include <linux/bitops.h>
-#include <linux/bug.h>
-
-/**
- * an enum dma_attr represents an attribute associated with a DMA
- * mapping. The semantics of each attribute should be defined in
- * Documentation/DMA-attributes.txt.
- */
-enum dma_attr {
-	DMA_ATTR_WRITE_BARRIER,
-	DMA_ATTR_WEAK_ORDERING,
-	DMA_ATTR_WRITE_COMBINE,
-	DMA_ATTR_NON_CONSISTENT,
-	DMA_ATTR_MAX,
-};
-
-#define __DMA_ATTRS_LONGS BITS_TO_LONGS(DMA_ATTR_MAX)
-
-/**
- * struct dma_attrs - an opaque container for DMA attributes
- * @flags - bitmask representing a collection of enum dma_attr
- */
-struct dma_attrs {
-	unsigned long flags[__DMA_ATTRS_LONGS];
-};
-
-#define DEFINE_DMA_ATTRS(x) 					\
-	struct dma_attrs x = {					\
-		.flags = { [0 ... __DMA_ATTRS_LONGS-1] = 0 },	\
-	}
-
-static inline void init_dma_attrs(struct dma_attrs *attrs)
-{
-	bitmap_zero(attrs->flags, __DMA_ATTRS_LONGS);
-}
-
-#ifdef CONFIG_HAVE_DMA_ATTRS
-/**
- * dma_set_attr - set a specific attribute
- * @attr: attribute to set
- * @attrs: struct dma_attrs (may be NULL)
- */
-static inline void dma_set_attr(enum dma_attr attr, struct dma_attrs *attrs)
-{
-	if (attrs == NULL)
-		return;
-	BUG_ON(attr >= DMA_ATTR_MAX);
-	__set_bit(attr, attrs->flags);
-}
-
-/**
- * dma_get_attr - check for a specific attribute
- * @attr: attribute to set
- * @attrs: struct dma_attrs (may be NULL)
- */
-static inline int dma_get_attr(enum dma_attr attr, struct dma_attrs *attrs)
-{
-	if (attrs == NULL)
-		return 0;
-	BUG_ON(attr >= DMA_ATTR_MAX);
-	return test_bit(attr, attrs->flags);
-}
-#else /* !CONFIG_HAVE_DMA_ATTRS */
-static inline void dma_set_attr(enum dma_attr attr, struct dma_attrs *attrs)
-{
-}
-
-static inline int dma_get_attr(enum dma_attr attr, struct dma_attrs *attrs)
-{
-	return 0;
-}
-#endif /* CONFIG_HAVE_DMA_ATTRS */
-#endif /* _DMA_ATTR_H */
diff --git a/ANDROID_3.4.5/include/linux/dma-buf.h b/ANDROID_3.4.5/include/linux/dma-buf.h
deleted file mode 100644
index 1f78d159..00000000
--- a/ANDROID_3.4.5/include/linux/dma-buf.h
+++ /dev/null
@@ -1,269 +0,0 @@
-/*
- * Header file for dma buffer sharing framework.
- *
- * Copyright(C) 2011 Linaro Limited. All rights reserved.
- * Author: Sumit Semwal <sumit.semwal@ti.com>
- *
- * Many thanks to linaro-mm-sig list, and specially
- * Arnd Bergmann <arnd@arndb.de>, Rob Clark <rob@ti.com> and
- * Daniel Vetter <daniel@ffwll.ch> for their support in creation and
- * refining of this idea.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-#ifndef __DMA_BUF_H__
-#define __DMA_BUF_H__
-
-#include <linux/file.h>
-#include <linux/err.h>
-#include <linux/scatterlist.h>
-#include <linux/list.h>
-#include <linux/dma-mapping.h>
-#include <linux/fs.h>
-
-struct device;
-struct dma_buf;
-struct dma_buf_attachment;
-
-/**
- * struct dma_buf_ops - operations possible on struct dma_buf
- * @attach: [optional] allows different devices to 'attach' themselves to the
- *	    given buffer. It might return -EBUSY to signal that backing storage
- *	    is already allocated and incompatible with the requirements
- *	    of requesting device.
- * @detach: [optional] detach a given device from this buffer.
- * @map_dma_buf: returns list of scatter pages allocated, increases usecount
- *		 of the buffer. Requires atleast one attach to be called
- *		 before. Returned sg list should already be mapped into
- *		 _device_ address space. This call may sleep. May also return
- *		 -EINTR. Should return -EINVAL if attach hasn't been called yet.
- * @unmap_dma_buf: decreases usecount of buffer, might deallocate scatter
- *		   pages.
- * @release: release this buffer; to be called after the last dma_buf_put.
- * @begin_cpu_access: [optional] called before cpu access to invalidate cpu
- * 		      caches and allocate backing storage (if not yet done)
- * 		      respectively pin the objet into memory.
- * @end_cpu_access: [optional] called after cpu access to flush cashes.
- * @kmap_atomic: maps a page from the buffer into kernel address
- * 		 space, users may not block until the subsequent unmap call.
- * 		 This callback must not sleep.
- * @kunmap_atomic: [optional] unmaps a atomically mapped page from the buffer.
- * 		   This Callback must not sleep.
- * @kmap: maps a page from the buffer into kernel address space.
- * @kunmap: [optional] unmaps a page from the buffer.
- * @mmap: used to expose the backing storage to userspace. Note that the
- * 	  mapping needs to be coherent - if the exporter doesn't directly
- * 	  support this, it needs to fake coherency by shooting down any ptes
- * 	  when transitioning away from the cpu domain.
- */
-struct dma_buf_ops {
-	int (*attach)(struct dma_buf *, struct device *,
-			struct dma_buf_attachment *);
-
-	void (*detach)(struct dma_buf *, struct dma_buf_attachment *);
-
-	/* For {map,unmap}_dma_buf below, any specific buffer attributes
-	 * required should get added to device_dma_parameters accessible
-	 * via dev->dma_params.
-	 */
-	struct sg_table * (*map_dma_buf)(struct dma_buf_attachment *,
-						enum dma_data_direction);
-	void (*unmap_dma_buf)(struct dma_buf_attachment *,
-						struct sg_table *,
-						enum dma_data_direction);
-	/* TODO: Add try_map_dma_buf version, to return immed with -EBUSY
-	 * if the call would block.
-	 */
-
-	/* after final dma_buf_put() */
-	void (*release)(struct dma_buf *);
-
-	int (*begin_cpu_access)(struct dma_buf *, size_t, size_t,
-				enum dma_data_direction);
-	void (*end_cpu_access)(struct dma_buf *, size_t, size_t,
-			       enum dma_data_direction);
-	void *(*kmap_atomic)(struct dma_buf *, unsigned long);
-	void (*kunmap_atomic)(struct dma_buf *, unsigned long, void *);
-	void *(*kmap)(struct dma_buf *, unsigned long);
-	void (*kunmap)(struct dma_buf *, unsigned long, void *);
-
-	int (*mmap)(struct dma_buf *, struct vm_area_struct *vma);
-};
-
-/**
- * struct dma_buf - shared buffer object
- * @size: size of the buffer
- * @file: file pointer used for sharing buffers across, and for refcounting.
- * @attachments: list of dma_buf_attachment that denotes all devices attached.
- * @ops: dma_buf_ops associated with this buffer object.
- * @priv: exporter specific private data for this buffer object.
- */
-struct dma_buf {
-	size_t size;
-	struct file *file;
-	struct list_head attachments;
-	const struct dma_buf_ops *ops;
-	/* mutex to serialize list manipulation and attach/detach */
-	struct mutex lock;
-	void *priv;
-};
-
-/**
- * struct dma_buf_attachment - holds device-buffer attachment data
- * @dmabuf: buffer for this attachment.
- * @dev: device attached to the buffer.
- * @node: list of dma_buf_attachment.
- * @priv: exporter specific attachment data.
- *
- * This structure holds the attachment information between the dma_buf buffer
- * and its user device(s). The list contains one attachment struct per device
- * attached to the buffer.
- */
-struct dma_buf_attachment {
-	struct dma_buf *dmabuf;
-	struct device *dev;
-	struct list_head node;
-	void *priv;
-};
-
-/**
- * get_dma_buf - convenience wrapper for get_file.
- * @dmabuf:	[in]	pointer to dma_buf
- *
- * Increments the reference count on the dma-buf, needed in case of drivers
- * that either need to create additional references to the dmabuf on the
- * kernel side.  For example, an exporter that needs to keep a dmabuf ptr
- * so that subsequent exports don't create a new dmabuf.
- */
-static inline void get_dma_buf(struct dma_buf *dmabuf)
-{
-	get_file(dmabuf->file);
-}
-
-#ifdef CONFIG_DMA_SHARED_BUFFER
-struct dma_buf_attachment *dma_buf_attach(struct dma_buf *dmabuf,
-							struct device *dev);
-void dma_buf_detach(struct dma_buf *dmabuf,
-				struct dma_buf_attachment *dmabuf_attach);
-struct dma_buf *dma_buf_export(void *priv, const struct dma_buf_ops *ops,
-			       size_t size, int flags);
-int dma_buf_fd(struct dma_buf *dmabuf, int flags);
-struct dma_buf *dma_buf_get(int fd);
-void dma_buf_put(struct dma_buf *dmabuf);
-
-struct sg_table *dma_buf_map_attachment(struct dma_buf_attachment *,
-					enum dma_data_direction);
-void dma_buf_unmap_attachment(struct dma_buf_attachment *, struct sg_table *,
-				enum dma_data_direction);
-int dma_buf_begin_cpu_access(struct dma_buf *dma_buf, size_t start, size_t len,
-			     enum dma_data_direction dir);
-void dma_buf_end_cpu_access(struct dma_buf *dma_buf, size_t start, size_t len,
-			    enum dma_data_direction dir);
-void *dma_buf_kmap_atomic(struct dma_buf *, unsigned long);
-void dma_buf_kunmap_atomic(struct dma_buf *, unsigned long, void *);
-void *dma_buf_kmap(struct dma_buf *, unsigned long);
-void dma_buf_kunmap(struct dma_buf *, unsigned long, void *);
-
-int dma_buf_mmap(struct dma_buf *, struct vm_area_struct *,
-		 unsigned long);
-#else
-
-static inline struct dma_buf_attachment *dma_buf_attach(struct dma_buf *dmabuf,
-							struct device *dev)
-{
-	return ERR_PTR(-ENODEV);
-}
-
-static inline void dma_buf_detach(struct dma_buf *dmabuf,
-				  struct dma_buf_attachment *dmabuf_attach)
-{
-	return;
-}
-
-static inline struct dma_buf *dma_buf_export(void *priv,
-					     const struct dma_buf_ops *ops,
-					     size_t size, int flags)
-{
-	return ERR_PTR(-ENODEV);
-}
-
-static inline int dma_buf_fd(struct dma_buf *dmabuf, int flags)
-{
-	return -ENODEV;
-}
-
-static inline struct dma_buf *dma_buf_get(int fd)
-{
-	return ERR_PTR(-ENODEV);
-}
-
-static inline void dma_buf_put(struct dma_buf *dmabuf)
-{
-	return;
-}
-
-static inline struct sg_table *dma_buf_map_attachment(
-	struct dma_buf_attachment *attach, enum dma_data_direction write)
-{
-	return ERR_PTR(-ENODEV);
-}
-
-static inline void dma_buf_unmap_attachment(struct dma_buf_attachment *attach,
-			struct sg_table *sg, enum dma_data_direction dir)
-{
-	return;
-}
-
-static inline int dma_buf_begin_cpu_access(struct dma_buf *dmabuf,
-					   size_t start, size_t len,
-					   enum dma_data_direction dir)
-{
-	return -ENODEV;
-}
-
-static inline void dma_buf_end_cpu_access(struct dma_buf *dmabuf,
-					  size_t start, size_t len,
-					  enum dma_data_direction dir)
-{
-}
-
-static inline void *dma_buf_kmap_atomic(struct dma_buf *dmabuf,
-					unsigned long pnum)
-{
-	return NULL;
-}
-
-static inline void dma_buf_kunmap_atomic(struct dma_buf *dmabuf,
-					 unsigned long pnum, void *vaddr)
-{
-}
-
-static inline void *dma_buf_kmap(struct dma_buf *dmabuf, unsigned long pnum)
-{
-	return NULL;
-}
-
-static inline void dma_buf_kunmap(struct dma_buf *dmabuf,
-				  unsigned long pnum, void *vaddr)
-{
-}
-
-static inline int dma_buf_mmap(struct dma_buf *dmabuf,
-			       struct vm_area_struct *vma,
-			       unsigned long pgoff)
-{
-	return -ENODEV;
-}
-#endif /* CONFIG_DMA_SHARED_BUFFER */
-
-#endif /* __DMA_BUF_H__ */
diff --git a/ANDROID_3.4.5/include/linux/dma-debug.h b/ANDROID_3.4.5/include/linux/dma-debug.h
deleted file mode 100644
index 171ad8ae..00000000
--- a/ANDROID_3.4.5/include/linux/dma-debug.h
+++ /dev/null
@@ -1,181 +0,0 @@
-/*
- * Copyright (C) 2008 Advanced Micro Devices, Inc.
- *
- * Author: Joerg Roedel <joerg.roedel@amd.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
- */
-
-#ifndef __DMA_DEBUG_H
-#define __DMA_DEBUG_H
-
-#include <linux/types.h>
-
-struct device;
-struct scatterlist;
-struct bus_type;
-
-#ifdef CONFIG_DMA_API_DEBUG
-
-extern void dma_debug_add_bus(struct bus_type *bus);
-
-extern void dma_debug_init(u32 num_entries);
-
-extern int dma_debug_resize_entries(u32 num_entries);
-
-extern void debug_dma_map_page(struct device *dev, struct page *page,
-			       size_t offset, size_t size,
-			       int direction, dma_addr_t dma_addr,
-			       bool map_single);
-
-extern void debug_dma_unmap_page(struct device *dev, dma_addr_t addr,
-				 size_t size, int direction, bool map_single);
-
-extern void debug_dma_map_sg(struct device *dev, struct scatterlist *sg,
-			     int nents, int mapped_ents, int direction);
-
-extern void debug_dma_unmap_sg(struct device *dev, struct scatterlist *sglist,
-			       int nelems, int dir);
-
-extern void debug_dma_alloc_coherent(struct device *dev, size_t size,
-				     dma_addr_t dma_addr, void *virt);
-
-extern void debug_dma_free_coherent(struct device *dev, size_t size,
-				    void *virt, dma_addr_t addr);
-
-extern void debug_dma_sync_single_for_cpu(struct device *dev,
-					  dma_addr_t dma_handle, size_t size,
-					  int direction);
-
-extern void debug_dma_sync_single_for_device(struct device *dev,
-					     dma_addr_t dma_handle,
-					     size_t size, int direction);
-
-extern void debug_dma_sync_single_range_for_cpu(struct device *dev,
-						dma_addr_t dma_handle,
-						unsigned long offset,
-						size_t size,
-						int direction);
-
-extern void debug_dma_sync_single_range_for_device(struct device *dev,
-						   dma_addr_t dma_handle,
-						   unsigned long offset,
-						   size_t size, int direction);
-
-extern void debug_dma_sync_sg_for_cpu(struct device *dev,
-				      struct scatterlist *sg,
-				      int nelems, int direction);
-
-extern void debug_dma_sync_sg_for_device(struct device *dev,
-					 struct scatterlist *sg,
-					 int nelems, int direction);
-
-extern void debug_dma_dump_mappings(struct device *dev);
-
-#else /* CONFIG_DMA_API_DEBUG */
-
-static inline void dma_debug_add_bus(struct bus_type *bus)
-{
-}
-
-static inline void dma_debug_init(u32 num_entries)
-{
-}
-
-static inline int dma_debug_resize_entries(u32 num_entries)
-{
-	return 0;
-}
-
-static inline void debug_dma_map_page(struct device *dev, struct page *page,
-				      size_t offset, size_t size,
-				      int direction, dma_addr_t dma_addr,
-				      bool map_single)
-{
-}
-
-static inline void debug_dma_unmap_page(struct device *dev, dma_addr_t addr,
-					size_t size, int direction,
-					bool map_single)
-{
-}
-
-static inline void debug_dma_map_sg(struct device *dev, struct scatterlist *sg,
-				    int nents, int mapped_ents, int direction)
-{
-}
-
-static inline void debug_dma_unmap_sg(struct device *dev,
-				      struct scatterlist *sglist,
-				      int nelems, int dir)
-{
-}
-
-static inline void debug_dma_alloc_coherent(struct device *dev, size_t size,
-					    dma_addr_t dma_addr, void *virt)
-{
-}
-
-static inline void debug_dma_free_coherent(struct device *dev, size_t size,
-					   void *virt, dma_addr_t addr)
-{
-}
-
-static inline void debug_dma_sync_single_for_cpu(struct device *dev,
-						 dma_addr_t dma_handle,
-						 size_t size, int direction)
-{
-}
-
-static inline void debug_dma_sync_single_for_device(struct device *dev,
-						    dma_addr_t dma_handle,
-						    size_t size, int direction)
-{
-}
-
-static inline void debug_dma_sync_single_range_for_cpu(struct device *dev,
-						       dma_addr_t dma_handle,
-						       unsigned long offset,
-						       size_t size,
-						       int direction)
-{
-}
-
-static inline void debug_dma_sync_single_range_for_device(struct device *dev,
-							  dma_addr_t dma_handle,
-							  unsigned long offset,
-							  size_t size,
-							  int direction)
-{
-}
-
-static inline void debug_dma_sync_sg_for_cpu(struct device *dev,
-					     struct scatterlist *sg,
-					     int nelems, int direction)
-{
-}
-
-static inline void debug_dma_sync_sg_for_device(struct device *dev,
-						struct scatterlist *sg,
-						int nelems, int direction)
-{
-}
-
-static inline void debug_dma_dump_mappings(struct device *dev)
-{
-}
-
-#endif /* CONFIG_DMA_API_DEBUG */
-
-#endif /* __DMA_DEBUG_H */
diff --git a/ANDROID_3.4.5/include/linux/dma-direction.h b/ANDROID_3.4.5/include/linux/dma-direction.h
deleted file mode 100644
index 95b6a82f..00000000
--- a/ANDROID_3.4.5/include/linux/dma-direction.h
+++ /dev/null
@@ -1,13 +0,0 @@
-#ifndef _LINUX_DMA_DIRECTION_H
-#define _LINUX_DMA_DIRECTION_H
-/*
- * These definitions mirror those in pci.h, so they can be used
- * interchangeably with their PCI_ counterparts.
- */
-enum dma_data_direction {
-	DMA_BIDIRECTIONAL = 0,
-	DMA_TO_DEVICE = 1,
-	DMA_FROM_DEVICE = 2,
-	DMA_NONE = 3,
-};
-#endif
diff --git a/ANDROID_3.4.5/include/linux/dma-mapping.h b/ANDROID_3.4.5/include/linux/dma-mapping.h
deleted file mode 100644
index dfc099e5..00000000
--- a/ANDROID_3.4.5/include/linux/dma-mapping.h
+++ /dev/null
@@ -1,237 +0,0 @@
-#ifndef _LINUX_DMA_MAPPING_H
-#define _LINUX_DMA_MAPPING_H
-
-#include <linux/string.h>
-#include <linux/device.h>
-#include <linux/err.h>
-#include <linux/dma-attrs.h>
-#include <linux/dma-direction.h>
-#include <linux/scatterlist.h>
-
-struct dma_map_ops {
-	void* (*alloc)(struct device *dev, size_t size,
-				dma_addr_t *dma_handle, gfp_t gfp,
-				struct dma_attrs *attrs);
-	void (*free)(struct device *dev, size_t size,
-			      void *vaddr, dma_addr_t dma_handle,
-			      struct dma_attrs *attrs);
-	int (*mmap)(struct device *, struct vm_area_struct *,
-			  void *, dma_addr_t, size_t, struct dma_attrs *attrs);
-
-	dma_addr_t (*map_page)(struct device *dev, struct page *page,
-			       unsigned long offset, size_t size,
-			       enum dma_data_direction dir,
-			       struct dma_attrs *attrs);
-	void (*unmap_page)(struct device *dev, dma_addr_t dma_handle,
-			   size_t size, enum dma_data_direction dir,
-			   struct dma_attrs *attrs);
-	int (*map_sg)(struct device *dev, struct scatterlist *sg,
-		      int nents, enum dma_data_direction dir,
-		      struct dma_attrs *attrs);
-	void (*unmap_sg)(struct device *dev,
-			 struct scatterlist *sg, int nents,
-			 enum dma_data_direction dir,
-			 struct dma_attrs *attrs);
-	void (*sync_single_for_cpu)(struct device *dev,
-				    dma_addr_t dma_handle, size_t size,
-				    enum dma_data_direction dir);
-	void (*sync_single_for_device)(struct device *dev,
-				       dma_addr_t dma_handle, size_t size,
-				       enum dma_data_direction dir);
-	void (*sync_sg_for_cpu)(struct device *dev,
-				struct scatterlist *sg, int nents,
-				enum dma_data_direction dir);
-	void (*sync_sg_for_device)(struct device *dev,
-				   struct scatterlist *sg, int nents,
-				   enum dma_data_direction dir);
-	int (*mapping_error)(struct device *dev, dma_addr_t dma_addr);
-	int (*dma_supported)(struct device *dev, u64 mask);
-	int (*set_dma_mask)(struct device *dev, u64 mask);
-#ifdef ARCH_HAS_DMA_GET_REQUIRED_MASK
-	u64 (*get_required_mask)(struct device *dev);
-#endif
-	int is_phys;
-};
-
-#define DMA_BIT_MASK(n)	(((n) == 64) ? ~0ULL : ((1ULL<<(n))-1))
-
-#define DMA_MASK_NONE	0x0ULL
-
-static inline int valid_dma_direction(int dma_direction)
-{
-	return ((dma_direction == DMA_BIDIRECTIONAL) ||
-		(dma_direction == DMA_TO_DEVICE) ||
-		(dma_direction == DMA_FROM_DEVICE));
-}
-
-static inline int is_device_dma_capable(struct device *dev)
-{
-	return dev->dma_mask != NULL && *dev->dma_mask != DMA_MASK_NONE;
-}
-
-#ifdef CONFIG_HAS_DMA
-#include <asm/dma-mapping.h>
-#else
-#include <asm-generic/dma-mapping-broken.h>
-#endif
-
-static inline u64 dma_get_mask(struct device *dev)
-{
-	if (dev && dev->dma_mask && *dev->dma_mask)
-		return *dev->dma_mask;
-	return DMA_BIT_MASK(32);
-}
-
-#ifdef CONFIG_ARCH_HAS_DMA_SET_COHERENT_MASK
-int dma_set_coherent_mask(struct device *dev, u64 mask);
-#else
-static inline int dma_set_coherent_mask(struct device *dev, u64 mask)
-{
-	if (!dma_supported(dev, mask))
-		return -EIO;
-	dev->coherent_dma_mask = mask;
-	return 0;
-}
-#endif
-
-extern u64 dma_get_required_mask(struct device *dev);
-
-static inline unsigned int dma_get_max_seg_size(struct device *dev)
-{
-	return dev->dma_parms ? dev->dma_parms->max_segment_size : 65536;
-}
-
-static inline unsigned int dma_set_max_seg_size(struct device *dev,
-						unsigned int size)
-{
-	if (dev->dma_parms) {
-		dev->dma_parms->max_segment_size = size;
-		return 0;
-	} else
-		return -EIO;
-}
-
-static inline unsigned long dma_get_seg_boundary(struct device *dev)
-{
-	return dev->dma_parms ?
-		dev->dma_parms->segment_boundary_mask : 0xffffffff;
-}
-
-static inline int dma_set_seg_boundary(struct device *dev, unsigned long mask)
-{
-	if (dev->dma_parms) {
-		dev->dma_parms->segment_boundary_mask = mask;
-		return 0;
-	} else
-		return -EIO;
-}
-
-static inline void *dma_zalloc_coherent(struct device *dev, size_t size,
-					dma_addr_t *dma_handle, gfp_t flag)
-{
-	void *ret = dma_alloc_coherent(dev, size, dma_handle, flag);
-	if (ret)
-		memset(ret, 0, size);
-	return ret;
-}
-
-#ifdef CONFIG_HAS_DMA
-static inline int dma_get_cache_alignment(void)
-{
-#ifdef ARCH_DMA_MINALIGN
-	return ARCH_DMA_MINALIGN;
-#endif
-	return 1;
-}
-#endif
-
-/* flags for the coherent memory api */
-#define	DMA_MEMORY_MAP			0x01
-#define DMA_MEMORY_IO			0x02
-#define DMA_MEMORY_INCLUDES_CHILDREN	0x04
-#define DMA_MEMORY_EXCLUSIVE		0x08
-
-#ifndef ARCH_HAS_DMA_DECLARE_COHERENT_MEMORY
-static inline int
-dma_declare_coherent_memory(struct device *dev, dma_addr_t bus_addr,
-			    dma_addr_t device_addr, size_t size, int flags)
-{
-	return 0;
-}
-
-static inline void
-dma_release_declared_memory(struct device *dev)
-{
-}
-
-static inline void *
-dma_mark_declared_memory_occupied(struct device *dev,
-				  dma_addr_t device_addr, size_t size)
-{
-	return ERR_PTR(-EBUSY);
-}
-#endif
-
-/*
- * Managed DMA API
- */
-extern void *dmam_alloc_coherent(struct device *dev, size_t size,
-				 dma_addr_t *dma_handle, gfp_t gfp);
-extern void dmam_free_coherent(struct device *dev, size_t size, void *vaddr,
-			       dma_addr_t dma_handle);
-extern void *dmam_alloc_noncoherent(struct device *dev, size_t size,
-				    dma_addr_t *dma_handle, gfp_t gfp);
-extern void dmam_free_noncoherent(struct device *dev, size_t size, void *vaddr,
-				  dma_addr_t dma_handle);
-#ifdef ARCH_HAS_DMA_DECLARE_COHERENT_MEMORY
-extern int dmam_declare_coherent_memory(struct device *dev, dma_addr_t bus_addr,
-					dma_addr_t device_addr, size_t size,
-					int flags);
-extern void dmam_release_declared_memory(struct device *dev);
-#else /* ARCH_HAS_DMA_DECLARE_COHERENT_MEMORY */
-static inline int dmam_declare_coherent_memory(struct device *dev,
-				dma_addr_t bus_addr, dma_addr_t device_addr,
-				size_t size, gfp_t gfp)
-{
-	return 0;
-}
-
-static inline void dmam_release_declared_memory(struct device *dev)
-{
-}
-#endif /* ARCH_HAS_DMA_DECLARE_COHERENT_MEMORY */
-
-#ifndef CONFIG_HAVE_DMA_ATTRS
-struct dma_attrs;
-
-#define dma_map_single_attrs(dev, cpu_addr, size, dir, attrs) \
-	dma_map_single(dev, cpu_addr, size, dir)
-
-#define dma_unmap_single_attrs(dev, dma_addr, size, dir, attrs) \
-	dma_unmap_single(dev, dma_addr, size, dir)
-
-#define dma_map_sg_attrs(dev, sgl, nents, dir, attrs) \
-	dma_map_sg(dev, sgl, nents, dir)
-
-#define dma_unmap_sg_attrs(dev, sgl, nents, dir, attrs) \
-	dma_unmap_sg(dev, sgl, nents, dir)
-
-#endif /* CONFIG_HAVE_DMA_ATTRS */
-
-#ifdef CONFIG_NEED_DMA_MAP_STATE
-#define DEFINE_DMA_UNMAP_ADDR(ADDR_NAME)        dma_addr_t ADDR_NAME
-#define DEFINE_DMA_UNMAP_LEN(LEN_NAME)          __u32 LEN_NAME
-#define dma_unmap_addr(PTR, ADDR_NAME)           ((PTR)->ADDR_NAME)
-#define dma_unmap_addr_set(PTR, ADDR_NAME, VAL)  (((PTR)->ADDR_NAME) = (VAL))
-#define dma_unmap_len(PTR, LEN_NAME)             ((PTR)->LEN_NAME)
-#define dma_unmap_len_set(PTR, LEN_NAME, VAL)    (((PTR)->LEN_NAME) = (VAL))
-#else
-#define DEFINE_DMA_UNMAP_ADDR(ADDR_NAME)
-#define DEFINE_DMA_UNMAP_LEN(LEN_NAME)
-#define dma_unmap_addr(PTR, ADDR_NAME)           (0)
-#define dma_unmap_addr_set(PTR, ADDR_NAME, VAL)  do { } while (0)
-#define dma_unmap_len(PTR, LEN_NAME)             (0)
-#define dma_unmap_len_set(PTR, LEN_NAME, VAL)    do { } while (0)
-#endif
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/dma_remapping.h b/ANDROID_3.4.5/include/linux/dma_remapping.h
deleted file mode 100644
index 57c9a8ae..00000000
--- a/ANDROID_3.4.5/include/linux/dma_remapping.h
+++ /dev/null
@@ -1,52 +0,0 @@
-#ifndef _DMA_REMAPPING_H
-#define _DMA_REMAPPING_H
-
-/*
- * VT-d hardware uses 4KiB page size regardless of host page size.
- */
-#define VTD_PAGE_SHIFT		(12)
-#define VTD_PAGE_SIZE		(1UL << VTD_PAGE_SHIFT)
-#define VTD_PAGE_MASK		(((u64)-1) << VTD_PAGE_SHIFT)
-#define VTD_PAGE_ALIGN(addr)	(((addr) + VTD_PAGE_SIZE - 1) & VTD_PAGE_MASK)
-
-#define VTD_STRIDE_SHIFT        (9)
-#define VTD_STRIDE_MASK         (((u64)-1) << VTD_STRIDE_SHIFT)
-
-#define DMA_PTE_READ (1)
-#define DMA_PTE_WRITE (2)
-#define DMA_PTE_LARGE_PAGE (1 << 7)
-#define DMA_PTE_SNP (1 << 11)
-
-#define CONTEXT_TT_MULTI_LEVEL	0
-#define CONTEXT_TT_DEV_IOTLB	1
-#define CONTEXT_TT_PASS_THROUGH 2
-
-struct intel_iommu;
-struct dmar_domain;
-struct root_entry;
-
-
-#ifdef CONFIG_INTEL_IOMMU
-extern void free_dmar_iommu(struct intel_iommu *iommu);
-extern int iommu_calculate_agaw(struct intel_iommu *iommu);
-extern int iommu_calculate_max_sagaw(struct intel_iommu *iommu);
-extern int dmar_disabled;
-extern int intel_iommu_enabled;
-#else
-static inline int iommu_calculate_agaw(struct intel_iommu *iommu)
-{
-	return 0;
-}
-static inline int iommu_calculate_max_sagaw(struct intel_iommu *iommu)
-{
-	return 0;
-}
-static inline void free_dmar_iommu(struct intel_iommu *iommu)
-{
-}
-#define dmar_disabled	(1)
-#define intel_iommu_enabled (0)
-#endif
-
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/dmaengine.h b/ANDROID_3.4.5/include/linux/dmaengine.h
deleted file mode 100644
index f9a2e5e6..00000000
--- a/ANDROID_3.4.5/include/linux/dmaengine.h
+++ /dev/null
@@ -1,1002 +0,0 @@
-/*
- * Copyright(c) 2004 - 2006 Intel Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the Free
- * Software Foundation; either version 2 of the License, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc., 59
- * Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- *
- * The full GNU General Public License is included in this distribution in the
- * file called COPYING.
- */
-#ifndef LINUX_DMAENGINE_H
-#define LINUX_DMAENGINE_H
-
-#include <linux/device.h>
-#include <linux/uio.h>
-#include <linux/bug.h>
-#include <linux/scatterlist.h>
-#include <linux/bitmap.h>
-#include <linux/types.h>
-#include <asm/page.h>
-
-/**
- * typedef dma_cookie_t - an opaque DMA cookie
- *
- * if dma_cookie_t is >0 it's a DMA request cookie, <0 it's an error code
- */
-typedef s32 dma_cookie_t;
-#define DMA_MIN_COOKIE	1
-#define DMA_MAX_COOKIE	INT_MAX
-
-#define dma_submit_error(cookie) ((cookie) < 0 ? 1 : 0)
-
-/**
- * enum dma_status - DMA transaction status
- * @DMA_SUCCESS: transaction completed successfully
- * @DMA_IN_PROGRESS: transaction not yet processed
- * @DMA_PAUSED: transaction is paused
- * @DMA_ERROR: transaction failed
- */
-enum dma_status {
-	DMA_SUCCESS,
-	DMA_IN_PROGRESS,
-	DMA_PAUSED,
-	DMA_ERROR,
-};
-
-/**
- * enum dma_transaction_type - DMA transaction types/indexes
- *
- * Note: The DMA_ASYNC_TX capability is not to be set by drivers.  It is
- * automatically set as dma devices are registered.
- */
-enum dma_transaction_type {
-	DMA_MEMCPY,
-	DMA_XOR,
-	DMA_PQ,
-	DMA_XOR_VAL,
-	DMA_PQ_VAL,
-	DMA_MEMSET,
-	DMA_INTERRUPT,
-	DMA_SG,
-	DMA_PRIVATE,
-	DMA_ASYNC_TX,
-	DMA_SLAVE,
-	DMA_CYCLIC,
-	DMA_INTERLEAVE,
-/* last transaction type for creation of the capabilities mask */
-	DMA_TX_TYPE_END,
-};
-
-/**
- * enum dma_transfer_direction - dma transfer mode and direction indicator
- * @DMA_MEM_TO_MEM: Async/Memcpy mode
- * @DMA_MEM_TO_DEV: Slave mode & From Memory to Device
- * @DMA_DEV_TO_MEM: Slave mode & From Device to Memory
- * @DMA_DEV_TO_DEV: Slave mode & From Device to Device
- */
-enum dma_transfer_direction {
-	DMA_MEM_TO_MEM,
-	DMA_MEM_TO_DEV,
-	DMA_DEV_TO_MEM,
-	DMA_DEV_TO_DEV,
-	DMA_TRANS_NONE,
-};
-
-/**
- * Interleaved Transfer Request
- * ----------------------------
- * A chunk is collection of contiguous bytes to be transfered.
- * The gap(in bytes) between two chunks is called inter-chunk-gap(ICG).
- * ICGs may or maynot change between chunks.
- * A FRAME is the smallest series of contiguous {chunk,icg} pairs,
- *  that when repeated an integral number of times, specifies the transfer.
- * A transfer template is specification of a Frame, the number of times
- *  it is to be repeated and other per-transfer attributes.
- *
- * Practically, a client driver would have ready a template for each
- *  type of transfer it is going to need during its lifetime and
- *  set only 'src_start' and 'dst_start' before submitting the requests.
- *
- *
- *  |      Frame-1        |       Frame-2       | ~ |       Frame-'numf'  |
- *  |====....==.===...=...|====....==.===...=...| ~ |====....==.===...=...|
- *
- *    ==  Chunk size
- *    ... ICG
- */
-
-/**
- * struct data_chunk - Element of scatter-gather list that makes a frame.
- * @size: Number of bytes to read from source.
- *	  size_dst := fn(op, size_src), so doesn't mean much for destination.
- * @icg: Number of bytes to jump after last src/dst address of this
- *	 chunk and before first src/dst address for next chunk.
- *	 Ignored for dst(assumed 0), if dst_inc is true and dst_sgl is false.
- *	 Ignored for src(assumed 0), if src_inc is true and src_sgl is false.
- */
-struct data_chunk {
-	size_t size;
-	size_t icg;
-};
-
-/**
- * struct dma_interleaved_template - Template to convey DMAC the transfer pattern
- *	 and attributes.
- * @src_start: Bus address of source for the first chunk.
- * @dst_start: Bus address of destination for the first chunk.
- * @dir: Specifies the type of Source and Destination.
- * @src_inc: If the source address increments after reading from it.
- * @dst_inc: If the destination address increments after writing to it.
- * @src_sgl: If the 'icg' of sgl[] applies to Source (scattered read).
- *		Otherwise, source is read contiguously (icg ignored).
- *		Ignored if src_inc is false.
- * @dst_sgl: If the 'icg' of sgl[] applies to Destination (scattered write).
- *		Otherwise, destination is filled contiguously (icg ignored).
- *		Ignored if dst_inc is false.
- * @numf: Number of frames in this template.
- * @frame_size: Number of chunks in a frame i.e, size of sgl[].
- * @sgl: Array of {chunk,icg} pairs that make up a frame.
- */
-struct dma_interleaved_template {
-	dma_addr_t src_start;
-	dma_addr_t dst_start;
-	enum dma_transfer_direction dir;
-	bool src_inc;
-	bool dst_inc;
-	bool src_sgl;
-	bool dst_sgl;
-	size_t numf;
-	size_t frame_size;
-	struct data_chunk sgl[0];
-};
-
-/**
- * enum dma_ctrl_flags - DMA flags to augment operation preparation,
- *  control completion, and communicate status.
- * @DMA_PREP_INTERRUPT - trigger an interrupt (callback) upon completion of
- *  this transaction
- * @DMA_CTRL_ACK - if clear, the descriptor cannot be reused until the client
- *  acknowledges receipt, i.e. has has a chance to establish any dependency
- *  chains
- * @DMA_COMPL_SKIP_SRC_UNMAP - set to disable dma-unmapping the source buffer(s)
- * @DMA_COMPL_SKIP_DEST_UNMAP - set to disable dma-unmapping the destination(s)
- * @DMA_COMPL_SRC_UNMAP_SINGLE - set to do the source dma-unmapping as single
- * 	(if not set, do the source dma-unmapping as page)
- * @DMA_COMPL_DEST_UNMAP_SINGLE - set to do the destination dma-unmapping as single
- * 	(if not set, do the destination dma-unmapping as page)
- * @DMA_PREP_PQ_DISABLE_P - prevent generation of P while generating Q
- * @DMA_PREP_PQ_DISABLE_Q - prevent generation of Q while generating P
- * @DMA_PREP_CONTINUE - indicate to a driver that it is reusing buffers as
- *  sources that were the result of a previous operation, in the case of a PQ
- *  operation it continues the calculation with new sources
- * @DMA_PREP_FENCE - tell the driver that subsequent operations depend
- *  on the result of this operation
- */
-enum dma_ctrl_flags {
-	DMA_PREP_INTERRUPT = (1 << 0),
-	DMA_CTRL_ACK = (1 << 1),
-	DMA_COMPL_SKIP_SRC_UNMAP = (1 << 2),
-	DMA_COMPL_SKIP_DEST_UNMAP = (1 << 3),
-	DMA_COMPL_SRC_UNMAP_SINGLE = (1 << 4),
-	DMA_COMPL_DEST_UNMAP_SINGLE = (1 << 5),
-	DMA_PREP_PQ_DISABLE_P = (1 << 6),
-	DMA_PREP_PQ_DISABLE_Q = (1 << 7),
-	DMA_PREP_CONTINUE = (1 << 8),
-	DMA_PREP_FENCE = (1 << 9),
-};
-
-/**
- * enum dma_ctrl_cmd - DMA operations that can optionally be exercised
- * on a running channel.
- * @DMA_TERMINATE_ALL: terminate all ongoing transfers
- * @DMA_PAUSE: pause ongoing transfers
- * @DMA_RESUME: resume paused transfer
- * @DMA_SLAVE_CONFIG: this command is only implemented by DMA controllers
- * that need to runtime reconfigure the slave channels (as opposed to passing
- * configuration data in statically from the platform). An additional
- * argument of struct dma_slave_config must be passed in with this
- * command.
- * @FSLDMA_EXTERNAL_START: this command will put the Freescale DMA controller
- * into external start mode.
- */
-enum dma_ctrl_cmd {
-	DMA_TERMINATE_ALL,
-	DMA_PAUSE,
-	DMA_RESUME,
-	DMA_SLAVE_CONFIG,
-	FSLDMA_EXTERNAL_START,
-};
-
-/**
- * enum sum_check_bits - bit position of pq_check_flags
- */
-enum sum_check_bits {
-	SUM_CHECK_P = 0,
-	SUM_CHECK_Q = 1,
-};
-
-/**
- * enum pq_check_flags - result of async_{xor,pq}_zero_sum operations
- * @SUM_CHECK_P_RESULT - 1 if xor zero sum error, 0 otherwise
- * @SUM_CHECK_Q_RESULT - 1 if reed-solomon zero sum error, 0 otherwise
- */
-enum sum_check_flags {
-	SUM_CHECK_P_RESULT = (1 << SUM_CHECK_P),
-	SUM_CHECK_Q_RESULT = (1 << SUM_CHECK_Q),
-};
-
-
-/**
- * dma_cap_mask_t - capabilities bitmap modeled after cpumask_t.
- * See linux/cpumask.h
- */
-typedef struct { DECLARE_BITMAP(bits, DMA_TX_TYPE_END); } dma_cap_mask_t;
-
-/**
- * struct dma_chan_percpu - the per-CPU part of struct dma_chan
- * @memcpy_count: transaction counter
- * @bytes_transferred: byte counter
- */
-
-struct dma_chan_percpu {
-	/* stats */
-	unsigned long memcpy_count;
-	unsigned long bytes_transferred;
-};
-
-/**
- * struct dma_chan - devices supply DMA channels, clients use them
- * @device: ptr to the dma device who supplies this channel, always !%NULL
- * @cookie: last cookie value returned to client
- * @completed_cookie: last completed cookie for this channel
- * @chan_id: channel ID for sysfs
- * @dev: class device for sysfs
- * @device_node: used to add this to the device chan list
- * @local: per-cpu pointer to a struct dma_chan_percpu
- * @client-count: how many clients are using this channel
- * @table_count: number of appearances in the mem-to-mem allocation table
- * @private: private data for certain client-channel associations
- */
-struct dma_chan {
-	struct dma_device *device;
-	dma_cookie_t cookie;
-	dma_cookie_t completed_cookie;
-
-	/* sysfs */
-	int chan_id;
-	struct dma_chan_dev *dev;
-
-	struct list_head device_node;
-	struct dma_chan_percpu __percpu *local;
-	int client_count;
-	int table_count;
-	void *private;
-};
-
-/**
- * struct dma_chan_dev - relate sysfs device node to backing channel device
- * @chan - driver channel device
- * @device - sysfs device
- * @dev_id - parent dma_device dev_id
- * @idr_ref - reference count to gate release of dma_device dev_id
- */
-struct dma_chan_dev {
-	struct dma_chan *chan;
-	struct device device;
-	int dev_id;
-	atomic_t *idr_ref;
-};
-
-/**
- * enum dma_slave_buswidth - defines bus with of the DMA slave
- * device, source or target buses
- */
-enum dma_slave_buswidth {
-	DMA_SLAVE_BUSWIDTH_UNDEFINED = 0,
-	DMA_SLAVE_BUSWIDTH_1_BYTE = 1,
-	DMA_SLAVE_BUSWIDTH_2_BYTES = 2,
-	DMA_SLAVE_BUSWIDTH_4_BYTES = 4,
-	DMA_SLAVE_BUSWIDTH_8_BYTES = 8,
-};
-
-/**
- * struct dma_slave_config - dma slave channel runtime config
- * @direction: whether the data shall go in or out on this slave
- * channel, right now. DMA_TO_DEVICE and DMA_FROM_DEVICE are
- * legal values, DMA_BIDIRECTIONAL is not acceptable since we
- * need to differentiate source and target addresses.
- * @src_addr: this is the physical address where DMA slave data
- * should be read (RX), if the source is memory this argument is
- * ignored.
- * @dst_addr: this is the physical address where DMA slave data
- * should be written (TX), if the source is memory this argument
- * is ignored.
- * @src_addr_width: this is the width in bytes of the source (RX)
- * register where DMA data shall be read. If the source
- * is memory this may be ignored depending on architecture.
- * Legal values: 1, 2, 4, 8.
- * @dst_addr_width: same as src_addr_width but for destination
- * target (TX) mutatis mutandis.
- * @src_maxburst: the maximum number of words (note: words, as in
- * units of the src_addr_width member, not bytes) that can be sent
- * in one burst to the device. Typically something like half the
- * FIFO depth on I/O peripherals so you don't overflow it. This
- * may or may not be applicable on memory sources.
- * @dst_maxburst: same as src_maxburst but for destination target
- * mutatis mutandis.
- * @device_fc: Flow Controller Settings. Only valid for slave channels. Fill
- * with 'true' if peripheral should be flow controller. Direction will be
- * selected at Runtime.
- *
- * This struct is passed in as configuration data to a DMA engine
- * in order to set up a certain channel for DMA transport at runtime.
- * The DMA device/engine has to provide support for an additional
- * command in the channel config interface, DMA_SLAVE_CONFIG
- * and this struct will then be passed in as an argument to the
- * DMA engine device_control() function.
- *
- * The rationale for adding configuration information to this struct
- * is as follows: if it is likely that most DMA slave controllers in
- * the world will support the configuration option, then make it
- * generic. If not: if it is fixed so that it be sent in static from
- * the platform data, then prefer to do that. Else, if it is neither
- * fixed at runtime, nor generic enough (such as bus mastership on
- * some CPU family and whatnot) then create a custom slave config
- * struct and pass that, then make this config a member of that
- * struct, if applicable.
- */
-struct dma_slave_config {
-	enum dma_transfer_direction direction;
-	dma_addr_t src_addr;
-	dma_addr_t dst_addr;
-	enum dma_slave_buswidth src_addr_width;
-	enum dma_slave_buswidth dst_addr_width;
-	u32 src_maxburst;
-	u32 dst_maxburst;
-	bool device_fc;
-};
-
-static inline const char *dma_chan_name(struct dma_chan *chan)
-{
-	return dev_name(&chan->dev->device);
-}
-
-void dma_chan_cleanup(struct kref *kref);
-
-/**
- * typedef dma_filter_fn - callback filter for dma_request_channel
- * @chan: channel to be reviewed
- * @filter_param: opaque parameter passed through dma_request_channel
- *
- * When this optional parameter is specified in a call to dma_request_channel a
- * suitable channel is passed to this routine for further dispositioning before
- * being returned.  Where 'suitable' indicates a non-busy channel that
- * satisfies the given capability mask.  It returns 'true' to indicate that the
- * channel is suitable.
- */
-typedef bool (*dma_filter_fn)(struct dma_chan *chan, void *filter_param);
-
-typedef void (*dma_async_tx_callback)(void *dma_async_param);
-/**
- * struct dma_async_tx_descriptor - async transaction descriptor
- * ---dma generic offload fields---
- * @cookie: tracking cookie for this transaction, set to -EBUSY if
- *	this tx is sitting on a dependency list
- * @flags: flags to augment operation preparation, control completion, and
- * 	communicate status
- * @phys: physical address of the descriptor
- * @chan: target channel for this operation
- * @tx_submit: set the prepared descriptor(s) to be executed by the engine
- * @callback: routine to call after this operation is complete
- * @callback_param: general parameter to pass to the callback routine
- * ---async_tx api specific fields---
- * @next: at completion submit this descriptor
- * @parent: pointer to the next level up in the dependency chain
- * @lock: protect the parent and next pointers
- */
-struct dma_async_tx_descriptor {
-	dma_cookie_t cookie;
-	enum dma_ctrl_flags flags; /* not a 'long' to pack with cookie */
-	dma_addr_t phys;
-	struct dma_chan *chan;
-	dma_cookie_t (*tx_submit)(struct dma_async_tx_descriptor *tx);
-	dma_async_tx_callback callback;
-	void *callback_param;
-#ifdef CONFIG_ASYNC_TX_ENABLE_CHANNEL_SWITCH
-	struct dma_async_tx_descriptor *next;
-	struct dma_async_tx_descriptor *parent;
-	spinlock_t lock;
-#endif
-};
-
-#ifndef CONFIG_ASYNC_TX_ENABLE_CHANNEL_SWITCH
-static inline void txd_lock(struct dma_async_tx_descriptor *txd)
-{
-}
-static inline void txd_unlock(struct dma_async_tx_descriptor *txd)
-{
-}
-static inline void txd_chain(struct dma_async_tx_descriptor *txd, struct dma_async_tx_descriptor *next)
-{
-	BUG();
-}
-static inline void txd_clear_parent(struct dma_async_tx_descriptor *txd)
-{
-}
-static inline void txd_clear_next(struct dma_async_tx_descriptor *txd)
-{
-}
-static inline struct dma_async_tx_descriptor *txd_next(struct dma_async_tx_descriptor *txd)
-{
-	return NULL;
-}
-static inline struct dma_async_tx_descriptor *txd_parent(struct dma_async_tx_descriptor *txd)
-{
-	return NULL;
-}
-
-#else
-static inline void txd_lock(struct dma_async_tx_descriptor *txd)
-{
-	spin_lock_bh(&txd->lock);
-}
-static inline void txd_unlock(struct dma_async_tx_descriptor *txd)
-{
-	spin_unlock_bh(&txd->lock);
-}
-static inline void txd_chain(struct dma_async_tx_descriptor *txd, struct dma_async_tx_descriptor *next)
-{
-	txd->next = next;
-	next->parent = txd;
-}
-static inline void txd_clear_parent(struct dma_async_tx_descriptor *txd)
-{
-	txd->parent = NULL;
-}
-static inline void txd_clear_next(struct dma_async_tx_descriptor *txd)
-{
-	txd->next = NULL;
-}
-static inline struct dma_async_tx_descriptor *txd_parent(struct dma_async_tx_descriptor *txd)
-{
-	return txd->parent;
-}
-static inline struct dma_async_tx_descriptor *txd_next(struct dma_async_tx_descriptor *txd)
-{
-	return txd->next;
-}
-#endif
-
-/**
- * struct dma_tx_state - filled in to report the status of
- * a transfer.
- * @last: last completed DMA cookie
- * @used: last issued DMA cookie (i.e. the one in progress)
- * @residue: the remaining number of bytes left to transmit
- *	on the selected transfer for states DMA_IN_PROGRESS and
- *	DMA_PAUSED if this is implemented in the driver, else 0
- */
-struct dma_tx_state {
-	dma_cookie_t last;
-	dma_cookie_t used;
-	u32 residue;
-};
-
-/**
- * struct dma_device - info on the entity supplying DMA services
- * @chancnt: how many DMA channels are supported
- * @privatecnt: how many DMA channels are requested by dma_request_channel
- * @channels: the list of struct dma_chan
- * @global_node: list_head for global dma_device_list
- * @cap_mask: one or more dma_capability flags
- * @max_xor: maximum number of xor sources, 0 if no capability
- * @max_pq: maximum number of PQ sources and PQ-continue capability
- * @copy_align: alignment shift for memcpy operations
- * @xor_align: alignment shift for xor operations
- * @pq_align: alignment shift for pq operations
- * @fill_align: alignment shift for memset operations
- * @dev_id: unique device ID
- * @dev: struct device reference for dma mapping api
- * @device_alloc_chan_resources: allocate resources and return the
- *	number of allocated descriptors
- * @device_free_chan_resources: release DMA channel's resources
- * @device_prep_dma_memcpy: prepares a memcpy operation
- * @device_prep_dma_xor: prepares a xor operation
- * @device_prep_dma_xor_val: prepares a xor validation operation
- * @device_prep_dma_pq: prepares a pq operation
- * @device_prep_dma_pq_val: prepares a pqzero_sum operation
- * @device_prep_dma_memset: prepares a memset operation
- * @device_prep_dma_interrupt: prepares an end of chain interrupt operation
- * @device_prep_slave_sg: prepares a slave dma operation
- * @device_prep_dma_cyclic: prepare a cyclic dma operation suitable for audio.
- *	The function takes a buffer of size buf_len. The callback function will
- *	be called after period_len bytes have been transferred.
- * @device_prep_interleaved_dma: Transfer expression in a generic way.
- * @device_control: manipulate all pending operations on a channel, returns
- *	zero or error code
- * @device_tx_status: poll for transaction completion, the optional
- *	txstate parameter can be supplied with a pointer to get a
- *	struct with auxiliary transfer status information, otherwise the call
- *	will just return a simple status code
- * @device_issue_pending: push pending transactions to hardware
- */
-struct dma_device {
-
-	unsigned int chancnt;
-	unsigned int privatecnt;
-	struct list_head channels;
-	struct list_head global_node;
-	dma_cap_mask_t  cap_mask;
-	unsigned short max_xor;
-	unsigned short max_pq;
-	u8 copy_align;
-	u8 xor_align;
-	u8 pq_align;
-	u8 fill_align;
-	#define DMA_HAS_PQ_CONTINUE (1 << 15)
-
-	int dev_id;
-	struct device *dev;
-
-	int (*device_alloc_chan_resources)(struct dma_chan *chan);
-	void (*device_free_chan_resources)(struct dma_chan *chan);
-
-	struct dma_async_tx_descriptor *(*device_prep_dma_memcpy)(
-		struct dma_chan *chan, dma_addr_t dest, dma_addr_t src,
-		size_t len, unsigned long flags);
-	struct dma_async_tx_descriptor *(*device_prep_dma_xor)(
-		struct dma_chan *chan, dma_addr_t dest, dma_addr_t *src,
-		unsigned int src_cnt, size_t len, unsigned long flags);
-	struct dma_async_tx_descriptor *(*device_prep_dma_xor_val)(
-		struct dma_chan *chan, dma_addr_t *src,	unsigned int src_cnt,
-		size_t len, enum sum_check_flags *result, unsigned long flags);
-	struct dma_async_tx_descriptor *(*device_prep_dma_pq)(
-		struct dma_chan *chan, dma_addr_t *dst, dma_addr_t *src,
-		unsigned int src_cnt, const unsigned char *scf,
-		size_t len, unsigned long flags);
-	struct dma_async_tx_descriptor *(*device_prep_dma_pq_val)(
-		struct dma_chan *chan, dma_addr_t *pq, dma_addr_t *src,
-		unsigned int src_cnt, const unsigned char *scf, size_t len,
-		enum sum_check_flags *pqres, unsigned long flags);
-	struct dma_async_tx_descriptor *(*device_prep_dma_memset)(
-		struct dma_chan *chan, dma_addr_t dest, int value, size_t len,
-		unsigned long flags);
-	struct dma_async_tx_descriptor *(*device_prep_dma_interrupt)(
-		struct dma_chan *chan, unsigned long flags);
-	struct dma_async_tx_descriptor *(*device_prep_dma_sg)(
-		struct dma_chan *chan,
-		struct scatterlist *dst_sg, unsigned int dst_nents,
-		struct scatterlist *src_sg, unsigned int src_nents,
-		unsigned long flags);
-
-	struct dma_async_tx_descriptor *(*device_prep_slave_sg)(
-		struct dma_chan *chan, struct scatterlist *sgl,
-		unsigned int sg_len, enum dma_transfer_direction direction,
-		unsigned long flags, void *context);
-	struct dma_async_tx_descriptor *(*device_prep_dma_cyclic)(
-		struct dma_chan *chan, dma_addr_t buf_addr, size_t buf_len,
-		size_t period_len, enum dma_transfer_direction direction,
-		void *context);
-	struct dma_async_tx_descriptor *(*device_prep_interleaved_dma)(
-		struct dma_chan *chan, struct dma_interleaved_template *xt,
-		unsigned long flags);
-	int (*device_control)(struct dma_chan *chan, enum dma_ctrl_cmd cmd,
-		unsigned long arg);
-
-	enum dma_status (*device_tx_status)(struct dma_chan *chan,
-					    dma_cookie_t cookie,
-					    struct dma_tx_state *txstate);
-	void (*device_issue_pending)(struct dma_chan *chan);
-};
-
-static inline int dmaengine_device_control(struct dma_chan *chan,
-					   enum dma_ctrl_cmd cmd,
-					   unsigned long arg)
-{
-	return chan->device->device_control(chan, cmd, arg);
-}
-
-static inline int dmaengine_slave_config(struct dma_chan *chan,
-					  struct dma_slave_config *config)
-{
-	return dmaengine_device_control(chan, DMA_SLAVE_CONFIG,
-			(unsigned long)config);
-}
-
-static inline struct dma_async_tx_descriptor *dmaengine_prep_slave_single(
-	struct dma_chan *chan, void *buf, size_t len,
-	enum dma_transfer_direction dir, unsigned long flags)
-{
-	struct scatterlist sg;
-	sg_init_one(&sg, buf, len);
-
-	return chan->device->device_prep_slave_sg(chan, &sg, 1,
-						  dir, flags, NULL);
-}
-
-static inline struct dma_async_tx_descriptor *dmaengine_prep_slave_sg(
-	struct dma_chan *chan, struct scatterlist *sgl,	unsigned int sg_len,
-	enum dma_transfer_direction dir, unsigned long flags)
-{
-	return chan->device->device_prep_slave_sg(chan, sgl, sg_len,
-						  dir, flags, NULL);
-}
-
-static inline struct dma_async_tx_descriptor *dmaengine_prep_dma_cyclic(
-		struct dma_chan *chan, dma_addr_t buf_addr, size_t buf_len,
-		size_t period_len, enum dma_transfer_direction dir)
-{
-	return chan->device->device_prep_dma_cyclic(chan, buf_addr, buf_len,
-						period_len, dir, NULL);
-}
-
-static inline int dmaengine_terminate_all(struct dma_chan *chan)
-{
-	return dmaengine_device_control(chan, DMA_TERMINATE_ALL, 0);
-}
-
-static inline int dmaengine_pause(struct dma_chan *chan)
-{
-	return dmaengine_device_control(chan, DMA_PAUSE, 0);
-}
-
-static inline int dmaengine_resume(struct dma_chan *chan)
-{
-	return dmaengine_device_control(chan, DMA_RESUME, 0);
-}
-
-static inline dma_cookie_t dmaengine_submit(struct dma_async_tx_descriptor *desc)
-{
-	return desc->tx_submit(desc);
-}
-
-static inline bool dmaengine_check_align(u8 align, size_t off1, size_t off2, size_t len)
-{
-	size_t mask;
-
-	if (!align)
-		return true;
-	mask = (1 << align) - 1;
-	if (mask & (off1 | off2 | len))
-		return false;
-	return true;
-}
-
-static inline bool is_dma_copy_aligned(struct dma_device *dev, size_t off1,
-				       size_t off2, size_t len)
-{
-	return dmaengine_check_align(dev->copy_align, off1, off2, len);
-}
-
-static inline bool is_dma_xor_aligned(struct dma_device *dev, size_t off1,
-				      size_t off2, size_t len)
-{
-	return dmaengine_check_align(dev->xor_align, off1, off2, len);
-}
-
-static inline bool is_dma_pq_aligned(struct dma_device *dev, size_t off1,
-				     size_t off2, size_t len)
-{
-	return dmaengine_check_align(dev->pq_align, off1, off2, len);
-}
-
-static inline bool is_dma_fill_aligned(struct dma_device *dev, size_t off1,
-				       size_t off2, size_t len)
-{
-	return dmaengine_check_align(dev->fill_align, off1, off2, len);
-}
-
-static inline void
-dma_set_maxpq(struct dma_device *dma, int maxpq, int has_pq_continue)
-{
-	dma->max_pq = maxpq;
-	if (has_pq_continue)
-		dma->max_pq |= DMA_HAS_PQ_CONTINUE;
-}
-
-static inline bool dmaf_continue(enum dma_ctrl_flags flags)
-{
-	return (flags & DMA_PREP_CONTINUE) == DMA_PREP_CONTINUE;
-}
-
-static inline bool dmaf_p_disabled_continue(enum dma_ctrl_flags flags)
-{
-	enum dma_ctrl_flags mask = DMA_PREP_CONTINUE | DMA_PREP_PQ_DISABLE_P;
-
-	return (flags & mask) == mask;
-}
-
-static inline bool dma_dev_has_pq_continue(struct dma_device *dma)
-{
-	return (dma->max_pq & DMA_HAS_PQ_CONTINUE) == DMA_HAS_PQ_CONTINUE;
-}
-
-static inline unsigned short dma_dev_to_maxpq(struct dma_device *dma)
-{
-	return dma->max_pq & ~DMA_HAS_PQ_CONTINUE;
-}
-
-/* dma_maxpq - reduce maxpq in the face of continued operations
- * @dma - dma device with PQ capability
- * @flags - to check if DMA_PREP_CONTINUE and DMA_PREP_PQ_DISABLE_P are set
- *
- * When an engine does not support native continuation we need 3 extra
- * source slots to reuse P and Q with the following coefficients:
- * 1/ {00} * P : remove P from Q', but use it as a source for P'
- * 2/ {01} * Q : use Q to continue Q' calculation
- * 3/ {00} * Q : subtract Q from P' to cancel (2)
- *
- * In the case where P is disabled we only need 1 extra source:
- * 1/ {01} * Q : use Q to continue Q' calculation
- */
-static inline int dma_maxpq(struct dma_device *dma, enum dma_ctrl_flags flags)
-{
-	if (dma_dev_has_pq_continue(dma) || !dmaf_continue(flags))
-		return dma_dev_to_maxpq(dma);
-	else if (dmaf_p_disabled_continue(flags))
-		return dma_dev_to_maxpq(dma) - 1;
-	else if (dmaf_continue(flags))
-		return dma_dev_to_maxpq(dma) - 3;
-	BUG();
-}
-
-/* --- public DMA engine API --- */
-
-#ifdef CONFIG_DMA_ENGINE
-void dmaengine_get(void);
-void dmaengine_put(void);
-#else
-static inline void dmaengine_get(void)
-{
-}
-static inline void dmaengine_put(void)
-{
-}
-#endif
-
-#ifdef CONFIG_NET_DMA
-#define net_dmaengine_get()	dmaengine_get()
-#define net_dmaengine_put()	dmaengine_put()
-#else
-static inline void net_dmaengine_get(void)
-{
-}
-static inline void net_dmaengine_put(void)
-{
-}
-#endif
-
-#ifdef CONFIG_ASYNC_TX_DMA
-#define async_dmaengine_get()	dmaengine_get()
-#define async_dmaengine_put()	dmaengine_put()
-#ifndef CONFIG_ASYNC_TX_ENABLE_CHANNEL_SWITCH
-#define async_dma_find_channel(type) dma_find_channel(DMA_ASYNC_TX)
-#else
-#define async_dma_find_channel(type) dma_find_channel(type)
-#endif /* CONFIG_ASYNC_TX_ENABLE_CHANNEL_SWITCH */
-#else
-static inline void async_dmaengine_get(void)
-{
-}
-static inline void async_dmaengine_put(void)
-{
-}
-static inline struct dma_chan *
-async_dma_find_channel(enum dma_transaction_type type)
-{
-	return NULL;
-}
-#endif /* CONFIG_ASYNC_TX_DMA */
-
-dma_cookie_t dma_async_memcpy_buf_to_buf(struct dma_chan *chan,
-	void *dest, void *src, size_t len);
-dma_cookie_t dma_async_memcpy_buf_to_pg(struct dma_chan *chan,
-	struct page *page, unsigned int offset, void *kdata, size_t len);
-dma_cookie_t dma_async_memcpy_pg_to_pg(struct dma_chan *chan,
-	struct page *dest_pg, unsigned int dest_off, struct page *src_pg,
-	unsigned int src_off, size_t len);
-void dma_async_tx_descriptor_init(struct dma_async_tx_descriptor *tx,
-	struct dma_chan *chan);
-
-static inline void async_tx_ack(struct dma_async_tx_descriptor *tx)
-{
-	tx->flags |= DMA_CTRL_ACK;
-}
-
-static inline void async_tx_clear_ack(struct dma_async_tx_descriptor *tx)
-{
-	tx->flags &= ~DMA_CTRL_ACK;
-}
-
-static inline bool async_tx_test_ack(struct dma_async_tx_descriptor *tx)
-{
-	return (tx->flags & DMA_CTRL_ACK) == DMA_CTRL_ACK;
-}
-
-#define first_dma_cap(mask) __first_dma_cap(&(mask))
-static inline int __first_dma_cap(const dma_cap_mask_t *srcp)
-{
-	return min_t(int, DMA_TX_TYPE_END,
-		find_first_bit(srcp->bits, DMA_TX_TYPE_END));
-}
-
-#define next_dma_cap(n, mask) __next_dma_cap((n), &(mask))
-static inline int __next_dma_cap(int n, const dma_cap_mask_t *srcp)
-{
-	return min_t(int, DMA_TX_TYPE_END,
-		find_next_bit(srcp->bits, DMA_TX_TYPE_END, n+1));
-}
-
-#define dma_cap_set(tx, mask) __dma_cap_set((tx), &(mask))
-static inline void
-__dma_cap_set(enum dma_transaction_type tx_type, dma_cap_mask_t *dstp)
-{
-	set_bit(tx_type, dstp->bits);
-}
-
-#define dma_cap_clear(tx, mask) __dma_cap_clear((tx), &(mask))
-static inline void
-__dma_cap_clear(enum dma_transaction_type tx_type, dma_cap_mask_t *dstp)
-{
-	clear_bit(tx_type, dstp->bits);
-}
-
-#define dma_cap_zero(mask) __dma_cap_zero(&(mask))
-static inline void __dma_cap_zero(dma_cap_mask_t *dstp)
-{
-	bitmap_zero(dstp->bits, DMA_TX_TYPE_END);
-}
-
-#define dma_has_cap(tx, mask) __dma_has_cap((tx), &(mask))
-static inline int
-__dma_has_cap(enum dma_transaction_type tx_type, dma_cap_mask_t *srcp)
-{
-	return test_bit(tx_type, srcp->bits);
-}
-
-#define for_each_dma_cap_mask(cap, mask) \
-	for ((cap) = first_dma_cap(mask);	\
-		(cap) < DMA_TX_TYPE_END;	\
-		(cap) = next_dma_cap((cap), (mask)))
-
-/**
- * dma_async_issue_pending - flush pending transactions to HW
- * @chan: target DMA channel
- *
- * This allows drivers to push copies to HW in batches,
- * reducing MMIO writes where possible.
- */
-static inline void dma_async_issue_pending(struct dma_chan *chan)
-{
-	chan->device->device_issue_pending(chan);
-}
-
-#define dma_async_memcpy_issue_pending(chan) dma_async_issue_pending(chan)
-
-/**
- * dma_async_is_tx_complete - poll for transaction completion
- * @chan: DMA channel
- * @cookie: transaction identifier to check status of
- * @last: returns last completed cookie, can be NULL
- * @used: returns last issued cookie, can be NULL
- *
- * If @last and @used are passed in, upon return they reflect the driver
- * internal state and can be used with dma_async_is_complete() to check
- * the status of multiple cookies without re-checking hardware state.
- */
-static inline enum dma_status dma_async_is_tx_complete(struct dma_chan *chan,
-	dma_cookie_t cookie, dma_cookie_t *last, dma_cookie_t *used)
-{
-	struct dma_tx_state state;
-	enum dma_status status;
-
-	status = chan->device->device_tx_status(chan, cookie, &state);
-	if (last)
-		*last = state.last;
-	if (used)
-		*used = state.used;
-	return status;
-}
-
-#define dma_async_memcpy_complete(chan, cookie, last, used)\
-	dma_async_is_tx_complete(chan, cookie, last, used)
-
-/**
- * dma_async_is_complete - test a cookie against chan state
- * @cookie: transaction identifier to test status of
- * @last_complete: last know completed transaction
- * @last_used: last cookie value handed out
- *
- * dma_async_is_complete() is used in dma_async_memcpy_complete()
- * the test logic is separated for lightweight testing of multiple cookies
- */
-static inline enum dma_status dma_async_is_complete(dma_cookie_t cookie,
-			dma_cookie_t last_complete, dma_cookie_t last_used)
-{
-	if (last_complete <= last_used) {
-		if ((cookie <= last_complete) || (cookie > last_used))
-			return DMA_SUCCESS;
-	} else {
-		if ((cookie <= last_complete) && (cookie > last_used))
-			return DMA_SUCCESS;
-	}
-	return DMA_IN_PROGRESS;
-}
-
-static inline void
-dma_set_tx_state(struct dma_tx_state *st, dma_cookie_t last, dma_cookie_t used, u32 residue)
-{
-	if (st) {
-		st->last = last;
-		st->used = used;
-		st->residue = residue;
-	}
-}
-
-enum dma_status dma_sync_wait(struct dma_chan *chan, dma_cookie_t cookie);
-#ifdef CONFIG_DMA_ENGINE
-enum dma_status dma_wait_for_async_tx(struct dma_async_tx_descriptor *tx);
-void dma_issue_pending_all(void);
-struct dma_chan *__dma_request_channel(dma_cap_mask_t *mask, dma_filter_fn fn, void *fn_param);
-void dma_release_channel(struct dma_chan *chan);
-#else
-static inline enum dma_status dma_wait_for_async_tx(struct dma_async_tx_descriptor *tx)
-{
-	return DMA_SUCCESS;
-}
-static inline void dma_issue_pending_all(void)
-{
-}
-static inline struct dma_chan *__dma_request_channel(dma_cap_mask_t *mask,
-					      dma_filter_fn fn, void *fn_param)
-{
-	return NULL;
-}
-static inline void dma_release_channel(struct dma_chan *chan)
-{
-}
-#endif
-
-/* --- DMA device --- */
-
-int dma_async_device_register(struct dma_device *device);
-void dma_async_device_unregister(struct dma_device *device);
-void dma_run_dependencies(struct dma_async_tx_descriptor *tx);
-struct dma_chan *dma_find_channel(enum dma_transaction_type tx_type);
-struct dma_chan *net_dma_find_channel(void);
-#define dma_request_channel(mask, x, y) __dma_request_channel(&(mask), x, y)
-
-/* --- Helper iov-locking functions --- */
-
-struct dma_page_list {
-	char __user *base_address;
-	int nr_pages;
-	struct page **pages;
-};
-
-struct dma_pinned_list {
-	int nr_iovecs;
-	struct dma_page_list page_list[0];
-};
-
-struct dma_pinned_list *dma_pin_iovec_pages(struct iovec *iov, size_t len);
-void dma_unpin_iovec_pages(struct dma_pinned_list* pinned_list);
-
-dma_cookie_t dma_memcpy_to_iovec(struct dma_chan *chan, struct iovec *iov,
-	struct dma_pinned_list *pinned_list, unsigned char *kdata, size_t len);
-dma_cookie_t dma_memcpy_pg_to_iovec(struct dma_chan *chan, struct iovec *iov,
-	struct dma_pinned_list *pinned_list, struct page *page,
-	unsigned int offset, size_t len);
-
-#endif /* DMAENGINE_H */
diff --git a/ANDROID_3.4.5/include/linux/dmapool.h b/ANDROID_3.4.5/include/linux/dmapool.h
deleted file mode 100644
index 022e34fc..00000000
--- a/ANDROID_3.4.5/include/linux/dmapool.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * include/linux/dmapool.h
- *
- * Allocation pools for DMAable (coherent) memory.
- *
- * This file is licensed under  the terms of the GNU General Public 
- * License version 2. This program is licensed "as is" without any 
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef LINUX_DMAPOOL_H
-#define	LINUX_DMAPOOL_H
-
-#include <asm/io.h>
-#include <asm/scatterlist.h>
-
-struct dma_pool *dma_pool_create(const char *name, struct device *dev, 
-			size_t size, size_t align, size_t allocation);
-
-void dma_pool_destroy(struct dma_pool *pool);
-
-void *dma_pool_alloc(struct dma_pool *pool, gfp_t mem_flags,
-		     dma_addr_t *handle);
-
-void dma_pool_free(struct dma_pool *pool, void *vaddr, dma_addr_t addr);
-
-/*
- * Managed DMA pool
- */
-struct dma_pool *dmam_pool_create(const char *name, struct device *dev,
-				  size_t size, size_t align, size_t allocation);
-void dmam_pool_destroy(struct dma_pool *pool);
-
-#endif
-
diff --git a/ANDROID_3.4.5/include/linux/dmar.h b/ANDROID_3.4.5/include/linux/dmar.h
deleted file mode 100644
index 731a6097..00000000
--- a/ANDROID_3.4.5/include/linux/dmar.h
+++ /dev/null
@@ -1,264 +0,0 @@
-/*
- * Copyright (c) 2006, Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc., 59 Temple
- * Place - Suite 330, Boston, MA 02111-1307 USA.
- *
- * Copyright (C) Ashok Raj <ashok.raj@intel.com>
- * Copyright (C) Shaohua Li <shaohua.li@intel.com>
- */
-
-#ifndef __DMAR_H__
-#define __DMAR_H__
-
-#include <linux/acpi.h>
-#include <linux/types.h>
-#include <linux/msi.h>
-#include <linux/irqreturn.h>
-
-struct acpi_dmar_header;
-
-/* DMAR Flags */
-#define DMAR_INTR_REMAP		0x1
-#define DMAR_X2APIC_OPT_OUT	0x2
-
-struct intel_iommu;
-#ifdef CONFIG_DMAR_TABLE
-extern struct acpi_table_header *dmar_tbl;
-struct dmar_drhd_unit {
-	struct list_head list;		/* list of drhd units	*/
-	struct  acpi_dmar_header *hdr;	/* ACPI header		*/
-	u64	reg_base_addr;		/* register base address*/
-	struct	pci_dev **devices; 	/* target device array	*/
-	int	devices_cnt;		/* target device count	*/
-	u16	segment;		/* PCI domain		*/
-	u8	ignored:1; 		/* ignore drhd		*/
-	u8	include_all:1;
-	struct intel_iommu *iommu;
-};
-
-extern struct list_head dmar_drhd_units;
-
-#define for_each_drhd_unit(drhd) \
-	list_for_each_entry(drhd, &dmar_drhd_units, list)
-
-#define for_each_active_iommu(i, drhd)					\
-	list_for_each_entry(drhd, &dmar_drhd_units, list)		\
-		if (i=drhd->iommu, drhd->ignored) {} else
-
-#define for_each_iommu(i, drhd)						\
-	list_for_each_entry(drhd, &dmar_drhd_units, list)		\
-		if (i=drhd->iommu, 0) {} else 
-
-extern int dmar_table_init(void);
-extern int dmar_dev_scope_init(void);
-
-/* Intel IOMMU detection */
-extern int detect_intel_iommu(void);
-extern int enable_drhd_fault_handling(void);
-
-extern int parse_ioapics_under_ir(void);
-extern int alloc_iommu(struct dmar_drhd_unit *);
-#else
-static inline int detect_intel_iommu(void)
-{
-	return -ENODEV;
-}
-
-static inline int dmar_table_init(void)
-{
-	return -ENODEV;
-}
-static inline int enable_drhd_fault_handling(void)
-{
-	return -1;
-}
-#endif /* !CONFIG_DMAR_TABLE */
-
-struct irte {
-	union {
-		struct {
-			__u64	present 	: 1,
-				fpd		: 1,
-				dst_mode	: 1,
-				redir_hint	: 1,
-				trigger_mode	: 1,
-				dlvry_mode	: 3,
-				avail		: 4,
-				__reserved_1	: 4,
-				vector		: 8,
-				__reserved_2	: 8,
-				dest_id		: 32;
-		};
-		__u64 low;
-	};
-
-	union {
-		struct {
-			__u64	sid		: 16,
-				sq		: 2,
-				svt		: 2,
-				__reserved_3	: 44;
-		};
-		__u64 high;
-	};
-};
-
-#ifdef CONFIG_IRQ_REMAP
-extern int intr_remapping_enabled;
-extern int intr_remapping_supported(void);
-extern int enable_intr_remapping(void);
-extern void disable_intr_remapping(void);
-extern int reenable_intr_remapping(int);
-
-extern int get_irte(int irq, struct irte *entry);
-extern int modify_irte(int irq, struct irte *irte_modified);
-extern int alloc_irte(struct intel_iommu *iommu, int irq, u16 count);
-extern int set_irte_irq(int irq, struct intel_iommu *iommu, u16 index,
-   			u16 sub_handle);
-extern int map_irq_to_irte_handle(int irq, u16 *sub_handle);
-extern int free_irte(int irq);
-
-extern struct intel_iommu *map_dev_to_ir(struct pci_dev *dev);
-extern struct intel_iommu *map_ioapic_to_ir(int apic);
-extern struct intel_iommu *map_hpet_to_ir(u8 id);
-extern int set_ioapic_sid(struct irte *irte, int apic);
-extern int set_hpet_sid(struct irte *irte, u8 id);
-extern int set_msi_sid(struct irte *irte, struct pci_dev *dev);
-#else
-static inline int alloc_irte(struct intel_iommu *iommu, int irq, u16 count)
-{
-	return -1;
-}
-static inline int modify_irte(int irq, struct irte *irte_modified)
-{
-	return -1;
-}
-static inline int free_irte(int irq)
-{
-	return -1;
-}
-static inline int map_irq_to_irte_handle(int irq, u16 *sub_handle)
-{
-	return -1;
-}
-static inline int set_irte_irq(int irq, struct intel_iommu *iommu, u16 index,
-			       u16 sub_handle)
-{
-	return -1;
-}
-static inline struct intel_iommu *map_dev_to_ir(struct pci_dev *dev)
-{
-	return NULL;
-}
-static inline struct intel_iommu *map_ioapic_to_ir(int apic)
-{
-	return NULL;
-}
-static inline struct intel_iommu *map_hpet_to_ir(unsigned int hpet_id)
-{
-	return NULL;
-}
-static inline int set_ioapic_sid(struct irte *irte, int apic)
-{
-	return 0;
-}
-static inline int set_hpet_sid(struct irte *irte, u8 id)
-{
-	return -1;
-}
-static inline int set_msi_sid(struct irte *irte, struct pci_dev *dev)
-{
-	return 0;
-}
-
-#define intr_remapping_enabled		(0)
-
-static inline int enable_intr_remapping(void)
-{
-	return -1;
-}
-
-static inline void disable_intr_remapping(void)
-{
-}
-
-static inline int reenable_intr_remapping(int eim)
-{
-	return 0;
-}
-#endif
-
-enum {
-	IRQ_REMAP_XAPIC_MODE,
-	IRQ_REMAP_X2APIC_MODE,
-};
-
-/* Can't use the common MSI interrupt functions
- * since DMAR is not a pci device
- */
-struct irq_data;
-extern void dmar_msi_unmask(struct irq_data *data);
-extern void dmar_msi_mask(struct irq_data *data);
-extern void dmar_msi_read(int irq, struct msi_msg *msg);
-extern void dmar_msi_write(int irq, struct msi_msg *msg);
-extern int dmar_set_interrupt(struct intel_iommu *iommu);
-extern irqreturn_t dmar_fault(int irq, void *dev_id);
-extern int arch_setup_dmar_msi(unsigned int irq);
-
-#ifdef CONFIG_INTEL_IOMMU
-extern int iommu_detected, no_iommu;
-extern struct list_head dmar_rmrr_units;
-struct dmar_rmrr_unit {
-	struct list_head list;		/* list of rmrr units	*/
-	struct acpi_dmar_header *hdr;	/* ACPI header		*/
-	u64	base_address;		/* reserved base address*/
-	u64	end_address;		/* reserved end address */
-	struct pci_dev **devices;	/* target devices */
-	int	devices_cnt;		/* target device count */
-};
-
-#define for_each_rmrr_units(rmrr) \
-	list_for_each_entry(rmrr, &dmar_rmrr_units, list)
-
-struct dmar_atsr_unit {
-	struct list_head list;		/* list of ATSR units */
-	struct acpi_dmar_header *hdr;	/* ACPI header */
-	struct pci_dev **devices;	/* target devices */
-	int devices_cnt;		/* target device count */
-	u8 include_all:1;		/* include all ports */
-};
-
-int dmar_parse_rmrr_atsr_dev(void);
-extern int dmar_parse_one_rmrr(struct acpi_dmar_header *header);
-extern int dmar_parse_one_atsr(struct acpi_dmar_header *header);
-extern int dmar_parse_dev_scope(void *start, void *end, int *cnt,
-				struct pci_dev ***devices, u16 segment);
-extern int intel_iommu_init(void);
-#else /* !CONFIG_INTEL_IOMMU: */
-static inline int intel_iommu_init(void) { return -ENODEV; }
-static inline int dmar_parse_one_rmrr(struct acpi_dmar_header *header)
-{
-	return 0;
-}
-static inline int dmar_parse_one_atsr(struct acpi_dmar_header *header)
-{
-	return 0;
-}
-static inline int dmar_parse_rmrr_atsr_dev(void)
-{
-	return 0;
-}
-#endif /* CONFIG_INTEL_IOMMU */
-
-#endif /* __DMAR_H__ */
diff --git a/ANDROID_3.4.5/include/linux/dmi.h b/ANDROID_3.4.5/include/linux/dmi.h
deleted file mode 100644
index f156cca2..00000000
--- a/ANDROID_3.4.5/include/linux/dmi.h
+++ /dev/null
@@ -1,139 +0,0 @@
-#ifndef __DMI_H__
-#define __DMI_H__
-
-#include <linux/list.h>
-#include <linux/mod_devicetable.h>
-
-/* enum dmi_field is in mod_devicetable.h */
-
-enum dmi_device_type {
-	DMI_DEV_TYPE_ANY = 0,
-	DMI_DEV_TYPE_OTHER,
-	DMI_DEV_TYPE_UNKNOWN,
-	DMI_DEV_TYPE_VIDEO,
-	DMI_DEV_TYPE_SCSI,
-	DMI_DEV_TYPE_ETHERNET,
-	DMI_DEV_TYPE_TOKENRING,
-	DMI_DEV_TYPE_SOUND,
-	DMI_DEV_TYPE_PATA,
-	DMI_DEV_TYPE_SATA,
-	DMI_DEV_TYPE_SAS,
-	DMI_DEV_TYPE_IPMI = -1,
-	DMI_DEV_TYPE_OEM_STRING = -2,
-	DMI_DEV_TYPE_DEV_ONBOARD = -3,
-};
-
-enum dmi_entry_type {
-	DMI_ENTRY_BIOS = 0,
-	DMI_ENTRY_SYSTEM,
-	DMI_ENTRY_BASEBOARD,
-	DMI_ENTRY_CHASSIS,
-	DMI_ENTRY_PROCESSOR,
-	DMI_ENTRY_MEM_CONTROLLER,
-	DMI_ENTRY_MEM_MODULE,
-	DMI_ENTRY_CACHE,
-	DMI_ENTRY_PORT_CONNECTOR,
-	DMI_ENTRY_SYSTEM_SLOT,
-	DMI_ENTRY_ONBOARD_DEVICE,
-	DMI_ENTRY_OEMSTRINGS,
-	DMI_ENTRY_SYSCONF,
-	DMI_ENTRY_BIOS_LANG,
-	DMI_ENTRY_GROUP_ASSOC,
-	DMI_ENTRY_SYSTEM_EVENT_LOG,
-	DMI_ENTRY_PHYS_MEM_ARRAY,
-	DMI_ENTRY_MEM_DEVICE,
-	DMI_ENTRY_32_MEM_ERROR,
-	DMI_ENTRY_MEM_ARRAY_MAPPED_ADDR,
-	DMI_ENTRY_MEM_DEV_MAPPED_ADDR,
-	DMI_ENTRY_BUILTIN_POINTING_DEV,
-	DMI_ENTRY_PORTABLE_BATTERY,
-	DMI_ENTRY_SYSTEM_RESET,
-	DMI_ENTRY_HW_SECURITY,
-	DMI_ENTRY_SYSTEM_POWER_CONTROLS,
-	DMI_ENTRY_VOLTAGE_PROBE,
-	DMI_ENTRY_COOLING_DEV,
-	DMI_ENTRY_TEMP_PROBE,
-	DMI_ENTRY_ELECTRICAL_CURRENT_PROBE,
-	DMI_ENTRY_OOB_REMOTE_ACCESS,
-	DMI_ENTRY_BIS_ENTRY,
-	DMI_ENTRY_SYSTEM_BOOT,
-	DMI_ENTRY_MGMT_DEV,
-	DMI_ENTRY_MGMT_DEV_COMPONENT,
-	DMI_ENTRY_MGMT_DEV_THRES,
-	DMI_ENTRY_MEM_CHANNEL,
-	DMI_ENTRY_IPMI_DEV,
-	DMI_ENTRY_SYS_POWER_SUPPLY,
-	DMI_ENTRY_ADDITIONAL,
-	DMI_ENTRY_ONBOARD_DEV_EXT,
-	DMI_ENTRY_MGMT_CONTROLLER_HOST,
-	DMI_ENTRY_INACTIVE = 126,
-	DMI_ENTRY_END_OF_TABLE = 127,
-};
-
-struct dmi_header {
-	u8 type;
-	u8 length;
-	u16 handle;
-};
-
-struct dmi_device {
-	struct list_head list;
-	int type;
-	const char *name;
-	void *device_data;	/* Type specific data */
-};
-
-#ifdef CONFIG_DMI
-
-struct dmi_dev_onboard {
-	struct dmi_device dev;
-	int instance;
-	int segment;
-	int bus;
-	int devfn;
-};
-
-extern int dmi_check_system(const struct dmi_system_id *list);
-const struct dmi_system_id *dmi_first_match(const struct dmi_system_id *list);
-extern const char * dmi_get_system_info(int field);
-extern const struct dmi_device * dmi_find_device(int type, const char *name,
-	const struct dmi_device *from);
-extern void dmi_scan_machine(void);
-extern bool dmi_get_date(int field, int *yearp, int *monthp, int *dayp);
-extern int dmi_name_in_vendors(const char *str);
-extern int dmi_name_in_serial(const char *str);
-extern int dmi_available;
-extern int dmi_walk(void (*decode)(const struct dmi_header *, void *),
-	void *private_data);
-extern bool dmi_match(enum dmi_field f, const char *str);
-
-#else
-
-static inline int dmi_check_system(const struct dmi_system_id *list) { return 0; }
-static inline const char * dmi_get_system_info(int field) { return NULL; }
-static inline const struct dmi_device * dmi_find_device(int type, const char *name,
-	const struct dmi_device *from) { return NULL; }
-static inline void dmi_scan_machine(void) { return; }
-static inline bool dmi_get_date(int field, int *yearp, int *monthp, int *dayp)
-{
-	if (yearp)
-		*yearp = 0;
-	if (monthp)
-		*monthp = 0;
-	if (dayp)
-		*dayp = 0;
-	return false;
-}
-static inline int dmi_name_in_vendors(const char *s) { return 0; }
-static inline int dmi_name_in_serial(const char *s) { return 0; }
-#define dmi_available 0
-static inline int dmi_walk(void (*decode)(const struct dmi_header *, void *),
-	void *private_data) { return -1; }
-static inline bool dmi_match(enum dmi_field f, const char *str)
-	{ return false; }
-static inline const struct dmi_system_id *
-	dmi_first_match(const struct dmi_system_id *list) { return NULL; }
-
-#endif
-
-#endif	/* __DMI_H__ */
diff --git a/ANDROID_3.4.5/include/linux/dn.h b/ANDROID_3.4.5/include/linux/dn.h
deleted file mode 100644
index 9c504454..00000000
--- a/ANDROID_3.4.5/include/linux/dn.h
+++ /dev/null
@@ -1,146 +0,0 @@
-#ifndef _LINUX_DN_H
-#define _LINUX_DN_H
-
-#include <linux/types.h>
-
-/*
-
-	DECnet Data Structures and Constants
-
-*/
-
-/* 
- * DNPROTO_NSP can't be the same as SOL_SOCKET, 
- * so increment each by one (compared to ULTRIX)
- */
-#define DNPROTO_NSP     2                       /* NSP protocol number       */
-#define DNPROTO_ROU     3                       /* Routing protocol number   */
-#define DNPROTO_NML     4                       /* Net mgt protocol number   */
-#define DNPROTO_EVL     5                       /* Evl protocol number (usr) */
-#define DNPROTO_EVR     6                       /* Evl protocol number (evl) */
-#define DNPROTO_NSPT    7                       /* NSP trace protocol number */
-
-
-#define DN_ADDL		2
-#define DN_MAXADDL	2 /* ULTRIX headers have 20 here, but pathworks has 2 */
-#define DN_MAXOPTL	16
-#define DN_MAXOBJL	16
-#define DN_MAXACCL	40
-#define DN_MAXALIASL	128
-#define DN_MAXNODEL	256
-#define DNBUFSIZE	65023
-
-/* 
- * SET/GET Socket options  - must match the DSO_ numbers below
- */
-#define SO_CONDATA      1
-#define SO_CONACCESS    2
-#define SO_PROXYUSR     3
-#define SO_LINKINFO     7
-
-#define DSO_CONDATA     1        /* Set/Get connect data                */
-#define DSO_DISDATA     10       /* Set/Get disconnect data             */
-#define DSO_CONACCESS   2        /* Set/Get connect access data         */
-#define DSO_ACCEPTMODE  4        /* Set/Get accept mode                 */
-#define DSO_CONACCEPT   5        /* Accept deferred connection          */
-#define DSO_CONREJECT   6        /* Reject deferred connection          */
-#define DSO_LINKINFO    7        /* Set/Get link information            */
-#define DSO_STREAM      8        /* Set socket type to stream           */
-#define DSO_SEQPACKET   9        /* Set socket type to sequenced packet */
-#define DSO_MAXWINDOW   11       /* Maximum window size allowed         */
-#define DSO_NODELAY	12       /* Turn off nagle                      */
-#define DSO_CORK        13       /* Wait for more data!                 */
-#define DSO_SERVICES	14       /* NSP Services field                  */
-#define DSO_INFO	15       /* NSP Info field                      */
-#define DSO_MAX         15       /* Maximum option number               */
-
-
-/* LINK States */
-#define LL_INACTIVE	0
-#define LL_CONNECTING	1
-#define LL_RUNNING	2
-#define LL_DISCONNECTING 3
-
-#define ACC_IMMED 0
-#define ACC_DEFER 1
-
-#define SDF_WILD        1                  /* Wild card object          */
-#define SDF_PROXY       2                  /* Addr eligible for proxy   */
-#define SDF_UICPROXY    4                  /* Use uic-based proxy       */
-
-/* Structures */
-
-
-struct dn_naddr {
-	__le16		a_len;
-	__u8 a_addr[DN_MAXADDL]; /* Two bytes little endian */
-};
-
-struct sockaddr_dn {
-	__u16		sdn_family;
-	__u8		sdn_flags;
-	__u8		sdn_objnum;
-	__le16		sdn_objnamel;
-	__u8		sdn_objname[DN_MAXOBJL];
-	struct   dn_naddr	sdn_add;
-};
-#define sdn_nodeaddrl   sdn_add.a_len   /* Node address length  */
-#define sdn_nodeaddr    sdn_add.a_addr  /* Node address         */
-
-
-
-/*
- * DECnet set/get DSO_CONDATA, DSO_DISDATA (optional data) structure
- */
-struct optdata_dn {
-        __le16  opt_status;     /* Extended status return */
-#define opt_sts opt_status
-        __le16  opt_optl;       /* Length of user data    */
-        __u8   opt_data[16];   /* User data              */
-};
-
-struct accessdata_dn {
-	__u8		acc_accl;
-	__u8		acc_acc[DN_MAXACCL];
-	__u8 		acc_passl;
-	__u8		acc_pass[DN_MAXACCL];
-	__u8 		acc_userl;
-	__u8		acc_user[DN_MAXACCL];
-};
-
-/*
- * DECnet logical link information structure
- */
-struct linkinfo_dn {
-        __u16  idn_segsize;    /* Segment size for link */
-        __u8   idn_linkstate;  /* Logical link state    */
-};
-
-/*
- * Ethernet address format (for DECnet)
- */
-union etheraddress {
-        __u8 dne_addr[6];             /* Full ethernet address */
-  struct {
-                __u8 dne_hiord[4];    /* DECnet HIORD prefix   */
-                __u8 dne_nodeaddr[2]; /* DECnet node address   */
-  } dne_remote;
-};
-
-
-/*
- * DECnet physical socket address format
- */
-struct dn_addr {
-        __le16 dna_family;      /* AF_DECnet               */
-        union etheraddress dna_netaddr; /* DECnet ethernet address */
-};
-
-#define DECNET_IOCTL_BASE 0x89 /* PROTOPRIVATE range */
-
-#define SIOCSNETADDR  _IOW(DECNET_IOCTL_BASE, 0xe0, struct dn_naddr)
-#define SIOCGNETADDR  _IOR(DECNET_IOCTL_BASE, 0xe1, struct dn_naddr)
-#define OSIOCSNETADDR _IOW(DECNET_IOCTL_BASE, 0xe0, int)
-#define OSIOCGNETADDR _IOR(DECNET_IOCTL_BASE, 0xe1, int)
-
-#endif /* _LINUX_DN_H */
diff --git a/ANDROID_3.4.5/include/linux/dnotify.h b/ANDROID_3.4.5/include/linux/dnotify.h
deleted file mode 100644
index 3290555a..00000000
--- a/ANDROID_3.4.5/include/linux/dnotify.h
+++ /dev/null
@@ -1,50 +0,0 @@
-#ifndef _LINUX_DNOTIFY_H
-#define _LINUX_DNOTIFY_H
-/*
- * Directory notification for Linux
- *
- * Copyright (C) 2000,2002 Stephen Rothwell
- */
-
-#include <linux/fs.h>
-
-struct dnotify_struct {
-	struct dnotify_struct *	dn_next;
-	__u32			dn_mask;
-	int			dn_fd;
-	struct file *		dn_filp;
-	fl_owner_t		dn_owner;
-};
-
-#ifdef __KERNEL__
-
-
-#ifdef CONFIG_DNOTIFY
-
-#define DNOTIFY_ALL_EVENTS (FS_DELETE | FS_DELETE_CHILD |\
-			    FS_MODIFY | FS_MODIFY_CHILD |\
-			    FS_ACCESS | FS_ACCESS_CHILD |\
-			    FS_ATTRIB | FS_ATTRIB_CHILD |\
-			    FS_CREATE | FS_DN_RENAME |\
-			    FS_MOVED_FROM | FS_MOVED_TO)
-
-extern int dir_notify_enable;
-extern void dnotify_flush(struct file *, fl_owner_t);
-extern int fcntl_dirnotify(int, struct file *, unsigned long);
-
-#else
-
-static inline void dnotify_flush(struct file *filp, fl_owner_t id)
-{
-}
-
-static inline int fcntl_dirnotify(int fd, struct file *filp, unsigned long arg)
-{
-	return -EINVAL;
-}
-
-#endif /* CONFIG_DNOTIFY */
-
-#endif /* __KERNEL __ */
-
-#endif /* _LINUX_DNOTIFY_H */
diff --git a/ANDROID_3.4.5/include/linux/dns_resolver.h b/ANDROID_3.4.5/include/linux/dns_resolver.h
deleted file mode 100644
index cc92268a..00000000
--- a/ANDROID_3.4.5/include/linux/dns_resolver.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- *   DNS Resolver upcall management for CIFS DFS and AFS
- *   Handles host name to IP address resolution and DNS query for AFSDB RR.
- *
- *   Copyright (c) International Business Machines  Corp., 2008
- *   Author(s): Steve French (sfrench@us.ibm.com)
- *              Wang Lei (wang840925@gmail.com)
- *
- *   This library is free software; you can redistribute it and/or modify
- *   it under the terms of the GNU Lesser General Public License as published
- *   by the Free Software Foundation; either version 2.1 of the License, or
- *   (at your option) any later version.
- *
- *   This library is distributed in the hope that it will be useful,
- *   but WITHOUT ANY WARRANTY; without even the implied warranty of
- *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See
- *   the GNU Lesser General Public License for more details.
- *
- *   You should have received a copy of the GNU Lesser General Public License
- *   along with this library; if not, write to the Free Software
- *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#ifndef _LINUX_DNS_RESOLVER_H
-#define _LINUX_DNS_RESOLVER_H
-
-#ifdef __KERNEL__
-
-extern int dns_query(const char *type, const char *name, size_t namelen,
-		     const char *options, char **_result, time_t *_expiry);
-
-#endif /* KERNEL */
-
-#endif /* _LINUX_DNS_RESOLVER_H */
diff --git a/ANDROID_3.4.5/include/linux/dqblk_qtree.h b/ANDROID_3.4.5/include/linux/dqblk_qtree.h
deleted file mode 100644
index 82a16527..00000000
--- a/ANDROID_3.4.5/include/linux/dqblk_qtree.h
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- *	Definitions of structures and functions for quota formats using trie
- */
-
-#ifndef _LINUX_DQBLK_QTREE_H
-#define _LINUX_DQBLK_QTREE_H
-
-#include <linux/types.h>
-
-/* Numbers of blocks needed for updates - we count with the smallest
- * possible block size (1024) */
-#define QTREE_INIT_ALLOC 4
-#define QTREE_INIT_REWRITE 2
-#define QTREE_DEL_ALLOC 0
-#define QTREE_DEL_REWRITE 6
-
-struct dquot;
-
-/* Operations */
-struct qtree_fmt_operations {
-	void (*mem2disk_dqblk)(void *disk, struct dquot *dquot);	/* Convert given entry from in memory format to disk one */
-	void (*disk2mem_dqblk)(struct dquot *dquot, void *disk);	/* Convert given entry from disk format to in memory one */
-	int (*is_id)(void *disk, struct dquot *dquot);	/* Is this structure for given id? */
-};
-
-/* Inmemory copy of version specific information */
-struct qtree_mem_dqinfo {
-	struct super_block *dqi_sb;	/* Sb quota is on */
-	int dqi_type;			/* Quota type */
-	unsigned int dqi_blocks;	/* # of blocks in quota file */
-	unsigned int dqi_free_blk;	/* First block in list of free blocks */
-	unsigned int dqi_free_entry;	/* First block with free entry */
-	unsigned int dqi_blocksize_bits;	/* Block size of quota file */
-	unsigned int dqi_entry_size;	/* Size of quota entry in quota file */
-	unsigned int dqi_usable_bs;	/* Space usable in block for quota data */
-	unsigned int dqi_qtree_depth;	/* Precomputed depth of quota tree */
-	struct qtree_fmt_operations *dqi_ops;	/* Operations for entry manipulation */
-};
-
-int qtree_write_dquot(struct qtree_mem_dqinfo *info, struct dquot *dquot);
-int qtree_read_dquot(struct qtree_mem_dqinfo *info, struct dquot *dquot);
-int qtree_delete_dquot(struct qtree_mem_dqinfo *info, struct dquot *dquot);
-int qtree_release_dquot(struct qtree_mem_dqinfo *info, struct dquot *dquot);
-int qtree_entry_unused(struct qtree_mem_dqinfo *info, char *disk);
-static inline int qtree_depth(struct qtree_mem_dqinfo *info)
-{
-	unsigned int epb = info->dqi_usable_bs >> 2;
-	unsigned long long entries = epb;
-	int i;
-
-	for (i = 1; entries < (1ULL << 32); i++)
-		entries *= epb;
-	return i;
-}
-
-#endif /* _LINUX_DQBLK_QTREE_H */
diff --git a/ANDROID_3.4.5/include/linux/dqblk_v1.h b/ANDROID_3.4.5/include/linux/dqblk_v1.h
deleted file mode 100644
index 3713a723..00000000
--- a/ANDROID_3.4.5/include/linux/dqblk_v1.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- *	File with in-memory structures of old quota format
- */
-
-#ifndef _LINUX_DQBLK_V1_H
-#define _LINUX_DQBLK_V1_H
-
-/* Root squash turned on */
-#define V1_DQF_RSQUASH 1
-
-/* Numbers of blocks needed for updates */
-#define V1_INIT_ALLOC 1
-#define V1_INIT_REWRITE 1
-#define V1_DEL_ALLOC 0
-#define V1_DEL_REWRITE 2
-
-#endif	/* _LINUX_DQBLK_V1_H */
diff --git a/ANDROID_3.4.5/include/linux/dqblk_v2.h b/ANDROID_3.4.5/include/linux/dqblk_v2.h
deleted file mode 100644
index 18000a54..00000000
--- a/ANDROID_3.4.5/include/linux/dqblk_v2.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- *  Definitions for vfsv0 quota format
- */
-
-#ifndef _LINUX_DQBLK_V2_H
-#define _LINUX_DQBLK_V2_H
-
-#include <linux/dqblk_qtree.h>
-
-/* Numbers of blocks needed for updates */
-#define V2_INIT_ALLOC QTREE_INIT_ALLOC
-#define V2_INIT_REWRITE QTREE_INIT_REWRITE
-#define V2_DEL_ALLOC QTREE_DEL_ALLOC
-#define V2_DEL_REWRITE QTREE_DEL_REWRITE
-
-#endif /* _LINUX_DQBLK_V2_H */
diff --git a/ANDROID_3.4.5/include/linux/dqblk_xfs.h b/ANDROID_3.4.5/include/linux/dqblk_xfs.h
deleted file mode 100644
index 86552807..00000000
--- a/ANDROID_3.4.5/include/linux/dqblk_xfs.h
+++ /dev/null
@@ -1,166 +0,0 @@
-/*
- * Copyright (c) 1995-2001,2004 Silicon Graphics, Inc.  All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU Lesser General Public License
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU Lesser General Public License for more details.
- *
- * You should have received a copy of the GNU Lesset General Public License
- * along with this program; if not, write to the Free Software Foundation,
- * Inc.,  51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-#ifndef _LINUX_DQBLK_XFS_H
-#define _LINUX_DQBLK_XFS_H
-
-#include <linux/types.h>
-
-/*
- * Disk quota - quotactl(2) commands for the XFS Quota Manager (XQM).
- */
-
-#define XQM_CMD(x)	(('X'<<8)+(x))	/* note: forms first QCMD argument */
-#define XQM_COMMAND(x)	(((x) & (0xff<<8)) == ('X'<<8))	/* test if for XFS */
-
-#define XQM_USRQUOTA	0	/* system call user quota type */
-#define XQM_GRPQUOTA	1	/* system call group quota type */
-#define XQM_PRJQUOTA	2	/* system call project quota type */
-#define XQM_MAXQUOTAS	3
-
-#define Q_XQUOTAON	XQM_CMD(1)	/* enable accounting/enforcement */
-#define Q_XQUOTAOFF	XQM_CMD(2)	/* disable accounting/enforcement */
-#define Q_XGETQUOTA	XQM_CMD(3)	/* get disk limits and usage */
-#define Q_XSETQLIM	XQM_CMD(4)	/* set disk limits */
-#define Q_XGETQSTAT	XQM_CMD(5)	/* get quota subsystem status */
-#define Q_XQUOTARM	XQM_CMD(6)	/* free disk space used by dquots */
-#define Q_XQUOTASYNC	XQM_CMD(7)	/* delalloc flush, updates dquots */
-
-/*
- * fs_disk_quota structure:
- *
- * This contains the current quota information regarding a user/proj/group.
- * It is 64-bit aligned, and all the blk units are in BBs (Basic Blocks) of
- * 512 bytes.
- */
-#define FS_DQUOT_VERSION	1	/* fs_disk_quota.d_version */
-typedef struct fs_disk_quota {
-	__s8		d_version;	/* version of this structure */
-	__s8		d_flags;	/* FS_{USER,PROJ,GROUP}_QUOTA */
-	__u16		d_fieldmask;	/* field specifier */
-	__u32		d_id;		/* user, project, or group ID */
-	__u64		d_blk_hardlimit;/* absolute limit on disk blks */
-	__u64		d_blk_softlimit;/* preferred limit on disk blks */
-	__u64		d_ino_hardlimit;/* maximum # allocated inodes */
-	__u64		d_ino_softlimit;/* preferred inode limit */
-	__u64		d_bcount;	/* # disk blocks owned by the user */
-	__u64		d_icount;	/* # inodes owned by the user */
-	__s32		d_itimer;	/* zero if within inode limits */
-					/* if not, we refuse service */
-	__s32		d_btimer;	/* similar to above; for disk blocks */
-	__u16	  	d_iwarns;       /* # warnings issued wrt num inodes */
-	__u16	  	d_bwarns;       /* # warnings issued wrt disk blocks */
-	__s32		d_padding2;	/* padding2 - for future use */
-	__u64		d_rtb_hardlimit;/* absolute limit on realtime blks */
-	__u64		d_rtb_softlimit;/* preferred limit on RT disk blks */
-	__u64		d_rtbcount;	/* # realtime blocks owned */
-	__s32		d_rtbtimer;	/* similar to above; for RT disk blks */
-	__u16	  	d_rtbwarns;     /* # warnings issued wrt RT disk blks */
-	__s16		d_padding3;	/* padding3 - for future use */	
-	char		d_padding4[8];	/* yet more padding */
-} fs_disk_quota_t;
-
-/*
- * These fields are sent to Q_XSETQLIM to specify fields that need to change.
- */
-#define FS_DQ_ISOFT	(1<<0)
-#define FS_DQ_IHARD	(1<<1)
-#define FS_DQ_BSOFT	(1<<2)
-#define FS_DQ_BHARD 	(1<<3)
-#define FS_DQ_RTBSOFT	(1<<4)
-#define FS_DQ_RTBHARD	(1<<5)
-#define FS_DQ_LIMIT_MASK	(FS_DQ_ISOFT | FS_DQ_IHARD | FS_DQ_BSOFT | \
-				 FS_DQ_BHARD | FS_DQ_RTBSOFT | FS_DQ_RTBHARD)
-/*
- * These timers can only be set in super user's dquot. For others, timers are
- * automatically started and stopped. Superusers timer values set the limits
- * for the rest.  In case these values are zero, the DQ_{F,B}TIMELIMIT values
- * defined below are used. 
- * These values also apply only to the d_fieldmask field for Q_XSETQLIM.
- */
-#define FS_DQ_BTIMER	(1<<6)
-#define FS_DQ_ITIMER	(1<<7)
-#define FS_DQ_RTBTIMER 	(1<<8)
-#define FS_DQ_TIMER_MASK	(FS_DQ_BTIMER | FS_DQ_ITIMER | FS_DQ_RTBTIMER)
-
-/*
- * Warning counts are set in both super user's dquot and others. For others,
- * warnings are set/cleared by the administrators (or automatically by going
- * below the soft limit).  Superusers warning values set the warning limits
- * for the rest.  In case these values are zero, the DQ_{F,B}WARNLIMIT values
- * defined below are used. 
- * These values also apply only to the d_fieldmask field for Q_XSETQLIM.
- */
-#define FS_DQ_BWARNS	(1<<9)
-#define FS_DQ_IWARNS	(1<<10)
-#define FS_DQ_RTBWARNS	(1<<11)
-#define FS_DQ_WARNS_MASK	(FS_DQ_BWARNS | FS_DQ_IWARNS | FS_DQ_RTBWARNS)
-
-/*
- * Accounting values.  These can only be set for filesystem with
- * non-transactional quotas that require quotacheck(8) in userspace.
- */
-#define FS_DQ_BCOUNT		(1<<12)
-#define FS_DQ_ICOUNT		(1<<13)
-#define FS_DQ_RTBCOUNT		(1<<14)
-#define FS_DQ_ACCT_MASK		(FS_DQ_BCOUNT | FS_DQ_ICOUNT | FS_DQ_RTBCOUNT)
-
-/*
- * Various flags related to quotactl(2).
- */
-#define FS_QUOTA_UDQ_ACCT	(1<<0)  /* user quota accounting */
-#define FS_QUOTA_UDQ_ENFD	(1<<1)  /* user quota limits enforcement */
-#define FS_QUOTA_GDQ_ACCT	(1<<2)  /* group quota accounting */
-#define FS_QUOTA_GDQ_ENFD	(1<<3)  /* group quota limits enforcement */
-#define FS_QUOTA_PDQ_ACCT	(1<<4)  /* project quota accounting */
-#define FS_QUOTA_PDQ_ENFD	(1<<5)  /* project quota limits enforcement */
-
-#define FS_USER_QUOTA		(1<<0)	/* user quota type */
-#define FS_PROJ_QUOTA		(1<<1)	/* project quota type */
-#define FS_GROUP_QUOTA		(1<<2)	/* group quota type */
-
-/*
- * fs_quota_stat is the struct returned in Q_XGETQSTAT for a given file system.
- * Provides a centralized way to get meta information about the quota subsystem.
- * eg. space taken up for user and group quotas, number of dquots currently
- * incore.
- */
-#define FS_QSTAT_VERSION	1	/* fs_quota_stat.qs_version */
-
-/*
- * Some basic information about 'quota files'.
- */
-typedef struct fs_qfilestat {
-	__u64		qfs_ino;	/* inode number */
-	__u64		qfs_nblks;	/* number of BBs 512-byte-blks */
-	__u32		qfs_nextents;	/* number of extents */
-} fs_qfilestat_t;
-
-typedef struct fs_quota_stat {
-	__s8		qs_version;	/* version number for future changes */
-	__u16		qs_flags;	/* FS_QUOTA_{U,P,G}DQ_{ACCT,ENFD} */
-	__s8		qs_pad;		/* unused */
-	fs_qfilestat_t	qs_uquota;	/* user quota storage information */
-	fs_qfilestat_t	qs_gquota;	/* group quota storage information */
-	__u32		qs_incoredqs;	/* number of dquots incore */
-	__s32		qs_btimelimit;  /* limit for blks timer */	
-	__s32		qs_itimelimit;  /* limit for inodes timer */	
-	__s32		qs_rtbtimelimit;/* limit for rt blks timer */	
-	__u16		qs_bwarnlimit;	/* limit for num warnings */
-	__u16		qs_iwarnlimit;	/* limit for num warnings */
-} fs_quota_stat_t;
-
-#endif	/* _LINUX_DQBLK_XFS_H */
diff --git a/ANDROID_3.4.5/include/linux/drbd.h b/ANDROID_3.4.5/include/linux/drbd.h
deleted file mode 100644
index 9e5f5607..00000000
--- a/ANDROID_3.4.5/include/linux/drbd.h
+++ /dev/null
@@ -1,369 +0,0 @@
-/*
-  drbd.h
-  Kernel module for 2.6.x Kernels
-
-  This file is part of DRBD by Philipp Reisner and Lars Ellenberg.
-
-  Copyright (C) 2001-2008, LINBIT Information Technologies GmbH.
-  Copyright (C) 2001-2008, Philipp Reisner <philipp.reisner@linbit.com>.
-  Copyright (C) 2001-2008, Lars Ellenberg <lars.ellenberg@linbit.com>.
-
-  drbd is free software; you can redistribute it and/or modify
-  it under the terms of the GNU General Public License as published by
-  the Free Software Foundation; either version 2, or (at your option)
-  any later version.
-
-  drbd is distributed in the hope that it will be useful,
-  but WITHOUT ANY WARRANTY; without even the implied warranty of
-  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-  GNU General Public License for more details.
-
-  You should have received a copy of the GNU General Public License
-  along with drbd; see the file COPYING.  If not, write to
-  the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
-
-*/
-#ifndef DRBD_H
-#define DRBD_H
-#include <linux/connector.h>
-#include <asm/types.h>
-
-#ifdef __KERNEL__
-#include <linux/types.h>
-#include <asm/byteorder.h>
-#else
-#include <sys/types.h>
-#include <sys/wait.h>
-#include <limits.h>
-
-/* Although the Linux source code makes a difference between
-   generic endianness and the bitfields' endianness, there is no
-   architecture as of Linux-2.6.24-rc4 where the bitfields' endianness
-   does not match the generic endianness. */
-
-#if __BYTE_ORDER == __LITTLE_ENDIAN
-#define __LITTLE_ENDIAN_BITFIELD
-#elif __BYTE_ORDER == __BIG_ENDIAN
-#define __BIG_ENDIAN_BITFIELD
-#else
-# error "sorry, weird endianness on this box"
-#endif
-
-#endif
-
-
-extern const char *drbd_buildtag(void);
-#define REL_VERSION "8.3.11"
-#define API_VERSION 88
-#define PRO_VERSION_MIN 86
-#define PRO_VERSION_MAX 96
-
-
-enum drbd_io_error_p {
-	EP_PASS_ON, /* FIXME should the better be named "Ignore"? */
-	EP_CALL_HELPER,
-	EP_DETACH
-};
-
-enum drbd_fencing_p {
-	FP_DONT_CARE,
-	FP_RESOURCE,
-	FP_STONITH
-};
-
-enum drbd_disconnect_p {
-	DP_RECONNECT,
-	DP_DROP_NET_CONF,
-	DP_FREEZE_IO
-};
-
-enum drbd_after_sb_p {
-	ASB_DISCONNECT,
-	ASB_DISCARD_YOUNGER_PRI,
-	ASB_DISCARD_OLDER_PRI,
-	ASB_DISCARD_ZERO_CHG,
-	ASB_DISCARD_LEAST_CHG,
-	ASB_DISCARD_LOCAL,
-	ASB_DISCARD_REMOTE,
-	ASB_CONSENSUS,
-	ASB_DISCARD_SECONDARY,
-	ASB_CALL_HELPER,
-	ASB_VIOLENTLY
-};
-
-enum drbd_on_no_data {
-	OND_IO_ERROR,
-	OND_SUSPEND_IO
-};
-
-enum drbd_on_congestion {
-	OC_BLOCK,
-	OC_PULL_AHEAD,
-	OC_DISCONNECT,
-};
-
-/* KEEP the order, do not delete or insert. Only append. */
-enum drbd_ret_code {
-	ERR_CODE_BASE		= 100,
-	NO_ERROR		= 101,
-	ERR_LOCAL_ADDR		= 102,
-	ERR_PEER_ADDR		= 103,
-	ERR_OPEN_DISK		= 104,
-	ERR_OPEN_MD_DISK	= 105,
-	ERR_DISK_NOT_BDEV	= 107,
-	ERR_MD_NOT_BDEV		= 108,
-	ERR_DISK_TO_SMALL	= 111,
-	ERR_MD_DISK_TO_SMALL	= 112,
-	ERR_BDCLAIM_DISK	= 114,
-	ERR_BDCLAIM_MD_DISK	= 115,
-	ERR_MD_IDX_INVALID	= 116,
-	ERR_IO_MD_DISK		= 118,
-	ERR_MD_INVALID          = 119,
-	ERR_AUTH_ALG		= 120,
-	ERR_AUTH_ALG_ND		= 121,
-	ERR_NOMEM		= 122,
-	ERR_DISCARD		= 123,
-	ERR_DISK_CONFIGURED	= 124,
-	ERR_NET_CONFIGURED	= 125,
-	ERR_MANDATORY_TAG	= 126,
-	ERR_MINOR_INVALID	= 127,
-	ERR_INTR		= 129, /* EINTR */
-	ERR_RESIZE_RESYNC	= 130,
-	ERR_NO_PRIMARY		= 131,
-	ERR_SYNC_AFTER		= 132,
-	ERR_SYNC_AFTER_CYCLE	= 133,
-	ERR_PAUSE_IS_SET	= 134,
-	ERR_PAUSE_IS_CLEAR	= 135,
-	ERR_PACKET_NR		= 137,
-	ERR_NO_DISK		= 138,
-	ERR_NOT_PROTO_C		= 139,
-	ERR_NOMEM_BITMAP	= 140,
-	ERR_INTEGRITY_ALG	= 141, /* DRBD 8.2 only */
-	ERR_INTEGRITY_ALG_ND	= 142, /* DRBD 8.2 only */
-	ERR_CPU_MASK_PARSE	= 143, /* DRBD 8.2 only */
-	ERR_CSUMS_ALG		= 144, /* DRBD 8.2 only */
-	ERR_CSUMS_ALG_ND	= 145, /* DRBD 8.2 only */
-	ERR_VERIFY_ALG		= 146, /* DRBD 8.2 only */
-	ERR_VERIFY_ALG_ND	= 147, /* DRBD 8.2 only */
-	ERR_CSUMS_RESYNC_RUNNING= 148, /* DRBD 8.2 only */
-	ERR_VERIFY_RUNNING	= 149, /* DRBD 8.2 only */
-	ERR_DATA_NOT_CURRENT	= 150,
-	ERR_CONNECTED		= 151, /* DRBD 8.3 only */
-	ERR_PERM		= 152,
-	ERR_NEED_APV_93		= 153,
-	ERR_STONITH_AND_PROT_A  = 154,
-	ERR_CONG_NOT_PROTO_A	= 155,
-	ERR_PIC_AFTER_DEP	= 156,
-	ERR_PIC_PEER_DEP	= 157,
-
-	/* insert new ones above this line */
-	AFTER_LAST_ERR_CODE
-};
-
-#define DRBD_PROT_A   1
-#define DRBD_PROT_B   2
-#define DRBD_PROT_C   3
-
-enum drbd_role {
-	R_UNKNOWN = 0,
-	R_PRIMARY = 1,     /* role */
-	R_SECONDARY = 2,   /* role */
-	R_MASK = 3,
-};
-
-/* The order of these constants is important.
- * The lower ones (<C_WF_REPORT_PARAMS) indicate
- * that there is no socket!
- * >=C_WF_REPORT_PARAMS ==> There is a socket
- */
-enum drbd_conns {
-	C_STANDALONE,
-	C_DISCONNECTING,  /* Temporal state on the way to StandAlone. */
-	C_UNCONNECTED,    /* >= C_UNCONNECTED -> inc_net() succeeds */
-
-	/* These temporal states are all used on the way
-	 * from >= C_CONNECTED to Unconnected.
-	 * The 'disconnect reason' states
-	 * I do not allow to change between them. */
-	C_TIMEOUT,
-	C_BROKEN_PIPE,
-	C_NETWORK_FAILURE,
-	C_PROTOCOL_ERROR,
-	C_TEAR_DOWN,
-
-	C_WF_CONNECTION,
-	C_WF_REPORT_PARAMS, /* we have a socket */
-	C_CONNECTED,      /* we have introduced each other */
-	C_STARTING_SYNC_S,  /* starting full sync by admin request. */
-	C_STARTING_SYNC_T,  /* starting full sync by admin request. */
-	C_WF_BITMAP_S,
-	C_WF_BITMAP_T,
-	C_WF_SYNC_UUID,
-
-	/* All SyncStates are tested with this comparison
-	 * xx >= C_SYNC_SOURCE && xx <= C_PAUSED_SYNC_T */
-	C_SYNC_SOURCE,
-	C_SYNC_TARGET,
-	C_VERIFY_S,
-	C_VERIFY_T,
-	C_PAUSED_SYNC_S,
-	C_PAUSED_SYNC_T,
-
-	C_AHEAD,
-	C_BEHIND,
-
-	C_MASK = 31
-};
-
-enum drbd_disk_state {
-	D_DISKLESS,
-	D_ATTACHING,      /* In the process of reading the meta-data */
-	D_FAILED,         /* Becomes D_DISKLESS as soon as we told it the peer */
-			/* when >= D_FAILED it is legal to access mdev->bc */
-	D_NEGOTIATING,    /* Late attaching state, we need to talk to the peer */
-	D_INCONSISTENT,
-	D_OUTDATED,
-	D_UNKNOWN,       /* Only used for the peer, never for myself */
-	D_CONSISTENT,     /* Might be D_OUTDATED, might be D_UP_TO_DATE ... */
-	D_UP_TO_DATE,       /* Only this disk state allows applications' IO ! */
-	D_MASK = 15
-};
-
-union drbd_state {
-/* According to gcc's docs is the ...
- * The order of allocation of bit-fields within a unit (C90 6.5.2.1, C99 6.7.2.1).
- * Determined by ABI.
- * pointed out by Maxim Uvarov q<muvarov@ru.mvista.com>
- * even though we transmit as "cpu_to_be32(state)",
- * the offsets of the bitfields still need to be swapped
- * on different endianness.
- */
-	struct {
-#if defined(__LITTLE_ENDIAN_BITFIELD)
-		unsigned role:2 ;   /* 3/4	 primary/secondary/unknown */
-		unsigned peer:2 ;   /* 3/4	 primary/secondary/unknown */
-		unsigned conn:5 ;   /* 17/32	 cstates */
-		unsigned disk:4 ;   /* 8/16	 from D_DISKLESS to D_UP_TO_DATE */
-		unsigned pdsk:4 ;   /* 8/16	 from D_DISKLESS to D_UP_TO_DATE */
-		unsigned susp:1 ;   /* 2/2	 IO suspended no/yes (by user) */
-		unsigned aftr_isp:1 ; /* isp .. imposed sync pause */
-		unsigned peer_isp:1 ;
-		unsigned user_isp:1 ;
-		unsigned susp_nod:1 ; /* IO suspended because no data */
-		unsigned susp_fen:1 ; /* IO suspended because fence peer handler runs*/
-		unsigned _pad:9;   /* 0	 unused */
-#elif defined(__BIG_ENDIAN_BITFIELD)
-		unsigned _pad:9;
-		unsigned susp_fen:1 ;
-		unsigned susp_nod:1 ;
-		unsigned user_isp:1 ;
-		unsigned peer_isp:1 ;
-		unsigned aftr_isp:1 ; /* isp .. imposed sync pause */
-		unsigned susp:1 ;   /* 2/2	 IO suspended  no/yes */
-		unsigned pdsk:4 ;   /* 8/16	 from D_DISKLESS to D_UP_TO_DATE */
-		unsigned disk:4 ;   /* 8/16	 from D_DISKLESS to D_UP_TO_DATE */
-		unsigned conn:5 ;   /* 17/32	 cstates */
-		unsigned peer:2 ;   /* 3/4	 primary/secondary/unknown */
-		unsigned role:2 ;   /* 3/4	 primary/secondary/unknown */
-#else
-# error "this endianness is not supported"
-#endif
-	};
-	unsigned int i;
-};
-
-enum drbd_state_rv {
-	SS_CW_NO_NEED = 4,
-	SS_CW_SUCCESS = 3,
-	SS_NOTHING_TO_DO = 2,
-	SS_SUCCESS = 1,
-	SS_UNKNOWN_ERROR = 0, /* Used to sleep longer in _drbd_request_state */
-	SS_TWO_PRIMARIES = -1,
-	SS_NO_UP_TO_DATE_DISK = -2,
-	SS_NO_LOCAL_DISK = -4,
-	SS_NO_REMOTE_DISK = -5,
-	SS_CONNECTED_OUTDATES = -6,
-	SS_PRIMARY_NOP = -7,
-	SS_RESYNC_RUNNING = -8,
-	SS_ALREADY_STANDALONE = -9,
-	SS_CW_FAILED_BY_PEER = -10,
-	SS_IS_DISKLESS = -11,
-	SS_DEVICE_IN_USE = -12,
-	SS_NO_NET_CONFIG = -13,
-	SS_NO_VERIFY_ALG = -14,       /* drbd-8.2 only */
-	SS_NEED_CONNECTION = -15,    /* drbd-8.2 only */
-	SS_LOWER_THAN_OUTDATED = -16,
-	SS_NOT_SUPPORTED = -17,      /* drbd-8.2 only */
-	SS_IN_TRANSIENT_STATE = -18,  /* Retry after the next state change */
-	SS_CONCURRENT_ST_CHG = -19,   /* Concurrent cluster side state change! */
-	SS_AFTER_LAST_ERROR = -20,    /* Keep this at bottom */
-};
-
-/* from drbd_strings.c */
-extern const char *drbd_conn_str(enum drbd_conns);
-extern const char *drbd_role_str(enum drbd_role);
-extern const char *drbd_disk_str(enum drbd_disk_state);
-extern const char *drbd_set_st_err_str(enum drbd_state_rv);
-
-#define SHARED_SECRET_MAX 64
-
-#define MDF_CONSISTENT		(1 << 0)
-#define MDF_PRIMARY_IND		(1 << 1)
-#define MDF_CONNECTED_IND	(1 << 2)
-#define MDF_FULL_SYNC		(1 << 3)
-#define MDF_WAS_UP_TO_DATE	(1 << 4)
-#define MDF_PEER_OUT_DATED	(1 << 5)
-#define MDF_CRASHED_PRIMARY     (1 << 6)
-
-enum drbd_uuid_index {
-	UI_CURRENT,
-	UI_BITMAP,
-	UI_HISTORY_START,
-	UI_HISTORY_END,
-	UI_SIZE,      /* nl-packet: number of dirty bits */
-	UI_FLAGS,     /* nl-packet: flags */
-	UI_EXTENDED_SIZE   /* Everything. */
-};
-
-enum drbd_timeout_flag {
-	UT_DEFAULT      = 0,
-	UT_DEGRADED     = 1,
-	UT_PEER_OUTDATED = 2,
-};
-
-#define UUID_JUST_CREATED ((__u64)4)
-
-#define DRBD_MAGIC 0x83740267
-#define BE_DRBD_MAGIC __constant_cpu_to_be32(DRBD_MAGIC)
-#define DRBD_MAGIC_BIG 0x835a
-#define BE_DRBD_MAGIC_BIG __constant_cpu_to_be16(DRBD_MAGIC_BIG)
-
-/* these are of type "int" */
-#define DRBD_MD_INDEX_INTERNAL -1
-#define DRBD_MD_INDEX_FLEX_EXT -2
-#define DRBD_MD_INDEX_FLEX_INT -3
-
-/* Start of the new netlink/connector stuff */
-
-#define DRBD_NL_CREATE_DEVICE 0x01
-#define DRBD_NL_SET_DEFAULTS  0x02
-
-
-/* For searching a vacant cn_idx value */
-#define CN_IDX_STEP			6977
-
-struct drbd_nl_cfg_req {
-	int packet_type;
-	unsigned int drbd_minor;
-	int flags;
-	unsigned short tag_list[];
-};
-
-struct drbd_nl_cfg_reply {
-	int packet_type;
-	unsigned int minor;
-	int ret_code; /* enum ret_code or set_st_err_t */
-	unsigned short tag_list[]; /* only used with get_* calls */
-};
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/drbd_limits.h b/ANDROID_3.4.5/include/linux/drbd_limits.h
deleted file mode 100644
index 447c3675..00000000
--- a/ANDROID_3.4.5/include/linux/drbd_limits.h
+++ /dev/null
@@ -1,168 +0,0 @@
-/*
-  drbd_limits.h
-  This file is part of DRBD by Philipp Reisner and Lars Ellenberg.
-*/
-
-/*
- * Our current limitations.
- * Some of them are hard limits,
- * some of them are arbitrary range limits, that make it easier to provide
- * feedback about nonsense settings for certain configurable values.
- */
-
-#ifndef DRBD_LIMITS_H
-#define DRBD_LIMITS_H 1
-
-#define DEBUG_RANGE_CHECK 0
-
-#define DRBD_MINOR_COUNT_MIN 1
-#define DRBD_MINOR_COUNT_MAX 256
-#define DRBD_MINOR_COUNT_DEF 32
-
-#define DRBD_DIALOG_REFRESH_MIN 0
-#define DRBD_DIALOG_REFRESH_MAX 600
-
-/* valid port number */
-#define DRBD_PORT_MIN 1
-#define DRBD_PORT_MAX 0xffff
-
-/* startup { */
-  /* if you want more than 3.4 days, disable */
-#define DRBD_WFC_TIMEOUT_MIN 0
-#define DRBD_WFC_TIMEOUT_MAX 300000
-#define DRBD_WFC_TIMEOUT_DEF 0
-
-#define DRBD_DEGR_WFC_TIMEOUT_MIN 0
-#define DRBD_DEGR_WFC_TIMEOUT_MAX 300000
-#define DRBD_DEGR_WFC_TIMEOUT_DEF 0
-
-#define DRBD_OUTDATED_WFC_TIMEOUT_MIN 0
-#define DRBD_OUTDATED_WFC_TIMEOUT_MAX 300000
-#define DRBD_OUTDATED_WFC_TIMEOUT_DEF 0
-/* }*/
-
-/* net { */
-  /* timeout, unit centi seconds
-   * more than one minute timeout is not useful */
-#define DRBD_TIMEOUT_MIN 1
-#define DRBD_TIMEOUT_MAX 600
-#define DRBD_TIMEOUT_DEF 60       /* 6 seconds */
-
-  /* active connection retries when C_WF_CONNECTION */
-#define DRBD_CONNECT_INT_MIN 1
-#define DRBD_CONNECT_INT_MAX 120
-#define DRBD_CONNECT_INT_DEF 10   /* seconds */
-
-  /* keep-alive probes when idle */
-#define DRBD_PING_INT_MIN 1
-#define DRBD_PING_INT_MAX 120
-#define DRBD_PING_INT_DEF 10
-
- /* timeout for the ping packets.*/
-#define DRBD_PING_TIMEO_MIN  1
-#define DRBD_PING_TIMEO_MAX  100
-#define DRBD_PING_TIMEO_DEF  5
-
-  /* max number of write requests between write barriers */
-#define DRBD_MAX_EPOCH_SIZE_MIN 1
-#define DRBD_MAX_EPOCH_SIZE_MAX 20000
-#define DRBD_MAX_EPOCH_SIZE_DEF 2048
-
-  /* I don't think that a tcp send buffer of more than 10M is useful */
-#define DRBD_SNDBUF_SIZE_MIN  0
-#define DRBD_SNDBUF_SIZE_MAX  (10<<20)
-#define DRBD_SNDBUF_SIZE_DEF  0
-
-#define DRBD_RCVBUF_SIZE_MIN  0
-#define DRBD_RCVBUF_SIZE_MAX  (10<<20)
-#define DRBD_RCVBUF_SIZE_DEF  0
-
-  /* @4k PageSize -> 128kB - 512MB */
-#define DRBD_MAX_BUFFERS_MIN  32
-#define DRBD_MAX_BUFFERS_MAX  131072
-#define DRBD_MAX_BUFFERS_DEF  2048
-
-  /* @4k PageSize -> 4kB - 512MB */
-#define DRBD_UNPLUG_WATERMARK_MIN  1
-#define DRBD_UNPLUG_WATERMARK_MAX  131072
-#define DRBD_UNPLUG_WATERMARK_DEF (DRBD_MAX_BUFFERS_DEF/16)
-
-  /* 0 is disabled.
-   * 200 should be more than enough even for very short timeouts */
-#define DRBD_KO_COUNT_MIN  0
-#define DRBD_KO_COUNT_MAX  200
-#define DRBD_KO_COUNT_DEF  0
-/* } */
-
-/* syncer { */
-  /* FIXME allow rate to be zero? */
-#define DRBD_RATE_MIN 1
-/* channel bonding 10 GbE, or other hardware */
-#define DRBD_RATE_MAX (4 << 20)
-#define DRBD_RATE_DEF 250  /* kb/second */
-
-  /* less than 7 would hit performance unnecessarily.
-   * 3833 is the largest prime that still does fit
-   * into 64 sectors of activity log */
-#define DRBD_AL_EXTENTS_MIN  7
-#define DRBD_AL_EXTENTS_MAX  3833
-#define DRBD_AL_EXTENTS_DEF  127
-
-#define DRBD_AFTER_MIN  -1
-#define DRBD_AFTER_MAX  255
-#define DRBD_AFTER_DEF  -1
-
-/* } */
-
-/* drbdsetup XY resize -d Z
- * you are free to reduce the device size to nothing, if you want to.
- * the upper limit with 64bit kernel, enough ram and flexible meta data
- * is 1 PiB, currently. */
-/* DRBD_MAX_SECTORS */
-#define DRBD_DISK_SIZE_SECT_MIN  0
-#define DRBD_DISK_SIZE_SECT_MAX  (1 * (2LLU << 40))
-#define DRBD_DISK_SIZE_SECT_DEF  0 /* = disabled = no user size... */
-
-#define DRBD_ON_IO_ERROR_DEF EP_PASS_ON
-#define DRBD_FENCING_DEF FP_DONT_CARE
-#define DRBD_AFTER_SB_0P_DEF ASB_DISCONNECT
-#define DRBD_AFTER_SB_1P_DEF ASB_DISCONNECT
-#define DRBD_AFTER_SB_2P_DEF ASB_DISCONNECT
-#define DRBD_RR_CONFLICT_DEF ASB_DISCONNECT
-#define DRBD_ON_NO_DATA_DEF OND_IO_ERROR
-#define DRBD_ON_CONGESTION_DEF OC_BLOCK
-
-#define DRBD_MAX_BIO_BVECS_MIN 0
-#define DRBD_MAX_BIO_BVECS_MAX 128
-#define DRBD_MAX_BIO_BVECS_DEF 0
-
-#define DRBD_C_PLAN_AHEAD_MIN  0
-#define DRBD_C_PLAN_AHEAD_MAX  300
-#define DRBD_C_PLAN_AHEAD_DEF  0 /* RS rate controller disabled by default */
-
-#define DRBD_C_DELAY_TARGET_MIN 1
-#define DRBD_C_DELAY_TARGET_MAX 100
-#define DRBD_C_DELAY_TARGET_DEF 10
-
-#define DRBD_C_FILL_TARGET_MIN 0
-#define DRBD_C_FILL_TARGET_MAX (1<<20) /* 500MByte in sec */
-#define DRBD_C_FILL_TARGET_DEF 0 /* By default disabled -> controlled by delay_target */
-
-#define DRBD_C_MAX_RATE_MIN     250 /* kByte/sec */
-#define DRBD_C_MAX_RATE_MAX     (4 << 20)
-#define DRBD_C_MAX_RATE_DEF     102400
-
-#define DRBD_C_MIN_RATE_MIN     0 /* kByte/sec */
-#define DRBD_C_MIN_RATE_MAX     (4 << 20)
-#define DRBD_C_MIN_RATE_DEF     4096
-
-#define DRBD_CONG_FILL_MIN	0
-#define DRBD_CONG_FILL_MAX	(10<<21) /* 10GByte in sectors */
-#define DRBD_CONG_FILL_DEF	0
-
-#define DRBD_CONG_EXTENTS_MIN	DRBD_AL_EXTENTS_MIN
-#define DRBD_CONG_EXTENTS_MAX	DRBD_AL_EXTENTS_MAX
-#define DRBD_CONG_EXTENTS_DEF	DRBD_AL_EXTENTS_DEF
-
-#undef RANGE
-#endif
diff --git a/ANDROID_3.4.5/include/linux/drbd_nl.h b/ANDROID_3.4.5/include/linux/drbd_nl.h
deleted file mode 100644
index ab6159e4..00000000
--- a/ANDROID_3.4.5/include/linux/drbd_nl.h
+++ /dev/null
@@ -1,160 +0,0 @@
-/*
-   PAKET( name,
-	  TYPE ( pn, pr, member )
-	  ...
-   )
-
-   You may never reissue one of the pn arguments
-*/
-
-#if !defined(NL_PACKET) || !defined(NL_STRING) || !defined(NL_INTEGER) || !defined(NL_BIT) || !defined(NL_INT64)
-#error "The macros NL_PACKET, NL_STRING, NL_INTEGER, NL_INT64 and NL_BIT needs to be defined"
-#endif
-
-NL_PACKET(primary, 1,
-       NL_BIT(		1,	T_MAY_IGNORE,	primary_force)
-)
-
-NL_PACKET(secondary, 2, )
-
-NL_PACKET(disk_conf, 3,
-	NL_INT64(	2,	T_MAY_IGNORE,	disk_size)
-	NL_STRING(	3,	T_MANDATORY,	backing_dev,	128)
-	NL_STRING(	4,	T_MANDATORY,	meta_dev,	128)
-	NL_INTEGER(	5,	T_MANDATORY,	meta_dev_idx)
-	NL_INTEGER(	6,	T_MAY_IGNORE,	on_io_error)
-	NL_INTEGER(	7,	T_MAY_IGNORE,	fencing)
-	NL_BIT(		37,	T_MAY_IGNORE,	use_bmbv)
-	NL_BIT(		53,	T_MAY_IGNORE,	no_disk_flush)
-	NL_BIT(		54,	T_MAY_IGNORE,	no_md_flush)
-	  /*  55 max_bio_size was available in 8.2.6rc2 */
-	NL_INTEGER(	56,	T_MAY_IGNORE,	max_bio_bvecs)
-	NL_BIT(		57,	T_MAY_IGNORE,	no_disk_barrier)
-	NL_BIT(		58,	T_MAY_IGNORE,	no_disk_drain)
-)
-
-NL_PACKET(detach, 4, )
-
-NL_PACKET(net_conf, 5,
-	NL_STRING(	8,	T_MANDATORY,	my_addr,	128)
-	NL_STRING(	9,	T_MANDATORY,	peer_addr,	128)
-	NL_STRING(	10,	T_MAY_IGNORE,	shared_secret,	SHARED_SECRET_MAX)
-	NL_STRING(	11,	T_MAY_IGNORE,	cram_hmac_alg,	SHARED_SECRET_MAX)
-	NL_STRING(	44,	T_MAY_IGNORE,	integrity_alg,	SHARED_SECRET_MAX)
-	NL_INTEGER(	14,	T_MAY_IGNORE,	timeout)
-	NL_INTEGER(	15,	T_MANDATORY,	wire_protocol)
-	NL_INTEGER(	16,	T_MAY_IGNORE,	try_connect_int)
-	NL_INTEGER(	17,	T_MAY_IGNORE,	ping_int)
-	NL_INTEGER(	18,	T_MAY_IGNORE,	max_epoch_size)
-	NL_INTEGER(	19,	T_MAY_IGNORE,	max_buffers)
-	NL_INTEGER(	20,	T_MAY_IGNORE,	unplug_watermark)
-	NL_INTEGER(	21,	T_MAY_IGNORE,	sndbuf_size)
-	NL_INTEGER(	22,	T_MAY_IGNORE,	ko_count)
-	NL_INTEGER(	24,	T_MAY_IGNORE,	after_sb_0p)
-	NL_INTEGER(	25,	T_MAY_IGNORE,	after_sb_1p)
-	NL_INTEGER(	26,	T_MAY_IGNORE,	after_sb_2p)
-	NL_INTEGER(	39,	T_MAY_IGNORE,	rr_conflict)
-	NL_INTEGER(	40,	T_MAY_IGNORE,	ping_timeo)
-	NL_INTEGER(	67,	T_MAY_IGNORE,	rcvbuf_size)
-	NL_INTEGER(	81,	T_MAY_IGNORE,	on_congestion)
-	NL_INTEGER(	82,	T_MAY_IGNORE,	cong_fill)
-	NL_INTEGER(	83,	T_MAY_IGNORE,	cong_extents)
-	  /* 59 addr_family was available in GIT, never released */
-	NL_BIT(		60,	T_MANDATORY,	mind_af)
-	NL_BIT(		27,	T_MAY_IGNORE,	want_lose)
-	NL_BIT(		28,	T_MAY_IGNORE,	two_primaries)
-	NL_BIT(		41,	T_MAY_IGNORE,	always_asbp)
-	NL_BIT(		61,	T_MAY_IGNORE,	no_cork)
-	NL_BIT(		62,	T_MANDATORY,	auto_sndbuf_size)
-	NL_BIT(		70,	T_MANDATORY,	dry_run)
-)
-
-NL_PACKET(disconnect, 6,
-	NL_BIT(		84,	T_MAY_IGNORE,	force)
-)
-
-NL_PACKET(resize, 7,
-	NL_INT64(		29,	T_MAY_IGNORE,	resize_size)
-	NL_BIT(			68,	T_MAY_IGNORE,	resize_force)
-	NL_BIT(			69,	T_MANDATORY,	no_resync)
-)
-
-NL_PACKET(syncer_conf, 8,
-	NL_INTEGER(	30,	T_MAY_IGNORE,	rate)
-	NL_INTEGER(	31,	T_MAY_IGNORE,	after)
-	NL_INTEGER(	32,	T_MAY_IGNORE,	al_extents)
-/*	NL_INTEGER(     71,	T_MAY_IGNORE,	dp_volume)
- *	NL_INTEGER(     72,	T_MAY_IGNORE,	dp_interval)
- *	NL_INTEGER(     73,	T_MAY_IGNORE,	throttle_th)
- *	NL_INTEGER(     74,	T_MAY_IGNORE,	hold_off_th)
- * feature will be reimplemented differently with 8.3.9 */
-	NL_STRING(      52,     T_MAY_IGNORE,   verify_alg,     SHARED_SECRET_MAX)
-	NL_STRING(      51,     T_MAY_IGNORE,   cpu_mask,       32)
-	NL_STRING(	64,	T_MAY_IGNORE,	csums_alg,	SHARED_SECRET_MAX)
-	NL_BIT(         65,     T_MAY_IGNORE,   use_rle)
-	NL_INTEGER(	75,	T_MAY_IGNORE,	on_no_data)
-	NL_INTEGER(	76,	T_MAY_IGNORE,	c_plan_ahead)
-	NL_INTEGER(     77,	T_MAY_IGNORE,	c_delay_target)
-	NL_INTEGER(     78,	T_MAY_IGNORE,	c_fill_target)
-	NL_INTEGER(     79,	T_MAY_IGNORE,	c_max_rate)
-	NL_INTEGER(     80,	T_MAY_IGNORE,	c_min_rate)
-)
-
-NL_PACKET(invalidate, 9, )
-NL_PACKET(invalidate_peer, 10, )
-NL_PACKET(pause_sync, 11, )
-NL_PACKET(resume_sync, 12, )
-NL_PACKET(suspend_io, 13, )
-NL_PACKET(resume_io, 14, )
-NL_PACKET(outdate, 15, )
-NL_PACKET(get_config, 16, )
-NL_PACKET(get_state, 17,
-	NL_INTEGER(	33,	T_MAY_IGNORE,	state_i)
-)
-
-NL_PACKET(get_uuids, 18,
-	NL_STRING(	34,	T_MAY_IGNORE,	uuids,	(UI_SIZE*sizeof(__u64)))
-	NL_INTEGER(	35,	T_MAY_IGNORE,	uuids_flags)
-)
-
-NL_PACKET(get_timeout_flag, 19,
-	NL_BIT(		36,	T_MAY_IGNORE,	use_degraded)
-)
-
-NL_PACKET(call_helper, 20,
-	NL_STRING(	38,	T_MAY_IGNORE,	helper,		32)
-)
-
-/* Tag nr 42 already allocated in drbd-8.1 development. */
-
-NL_PACKET(sync_progress, 23,
-	NL_INTEGER(	43,	T_MAY_IGNORE,	sync_progress)
-)
-
-NL_PACKET(dump_ee, 24,
-	NL_STRING(	45,	T_MAY_IGNORE,	dump_ee_reason, 32)
-	NL_STRING(	46,	T_MAY_IGNORE,	seen_digest, SHARED_SECRET_MAX)
-	NL_STRING(	47,	T_MAY_IGNORE,	calc_digest, SHARED_SECRET_MAX)
-	NL_INT64(	48,	T_MAY_IGNORE,	ee_sector)
-	NL_INT64(	49,	T_MAY_IGNORE,	ee_block_id)
-	NL_STRING(	50,	T_MAY_IGNORE,	ee_data,	32 << 10)
-)
-
-NL_PACKET(start_ov, 25,
-	NL_INT64(	66,	T_MAY_IGNORE,	start_sector)
-)
-
-NL_PACKET(new_c_uuid, 26,
-       NL_BIT(		63,	T_MANDATORY,	clear_bm)
-)
-
-#ifdef NL_RESPONSE
-NL_RESPONSE(return_code_only, 27)
-#endif
-
-#undef NL_PACKET
-#undef NL_INTEGER
-#undef NL_INT64
-#undef NL_BIT
-#undef NL_STRING
-#undef NL_RESPONSE
diff --git a/ANDROID_3.4.5/include/linux/drbd_tag_magic.h b/ANDROID_3.4.5/include/linux/drbd_tag_magic.h
deleted file mode 100644
index 81f52f2c..00000000
--- a/ANDROID_3.4.5/include/linux/drbd_tag_magic.h
+++ /dev/null
@@ -1,84 +0,0 @@
-#ifndef DRBD_TAG_MAGIC_H
-#define DRBD_TAG_MAGIC_H
-
-#define TT_END     0
-#define TT_REMOVED 0xE000
-
-/* declare packet_type enums */
-enum packet_types {
-#define NL_PACKET(name, number, fields) P_ ## name = number,
-#define NL_RESPONSE(name, number) P_ ## name = number,
-#define NL_INTEGER(pn, pr, member)
-#define NL_INT64(pn, pr, member)
-#define NL_BIT(pn, pr, member)
-#define NL_STRING(pn, pr, member, len)
-#include "drbd_nl.h"
-	P_nl_after_last_packet,
-};
-
-/* These struct are used to deduce the size of the tag lists: */
-#define NL_PACKET(name, number, fields)	\
-	struct name ## _tag_len_struct { fields };
-#define NL_INTEGER(pn, pr, member)		\
-	int member; int tag_and_len ## member;
-#define NL_INT64(pn, pr, member)		\
-	__u64 member; int tag_and_len ## member;
-#define NL_BIT(pn, pr, member)		\
-	unsigned char member:1; int tag_and_len ## member;
-#define NL_STRING(pn, pr, member, len)	\
-	unsigned char member[len]; int member ## _len; \
-	int tag_and_len ## member;
-#include <linux/drbd_nl.h>
-
-/* declare tag-list-sizes */
-static const int tag_list_sizes[] = {
-#define NL_PACKET(name, number, fields) 2 fields ,
-#define NL_INTEGER(pn, pr, member)      + 4 + 4
-#define NL_INT64(pn, pr, member)        + 4 + 8
-#define NL_BIT(pn, pr, member)          + 4 + 1
-#define NL_STRING(pn, pr, member, len)  + 4 + (len)
-#include "drbd_nl.h"
-};
-
-/* The two highest bits are used for the tag type */
-#define TT_MASK      0xC000
-#define TT_INTEGER   0x0000
-#define TT_INT64     0x4000
-#define TT_BIT       0x8000
-#define TT_STRING    0xC000
-/* The next bit indicates if processing of the tag is mandatory */
-#define T_MANDATORY  0x2000
-#define T_MAY_IGNORE 0x0000
-#define TN_MASK      0x1fff
-/* The remaining 13 bits are used to enumerate the tags */
-
-#define tag_type(T)   ((T) & TT_MASK)
-#define tag_number(T) ((T) & TN_MASK)
-
-/* declare tag enums */
-#define NL_PACKET(name, number, fields) fields
-enum drbd_tags {
-#define NL_INTEGER(pn, pr, member)     T_ ## member = pn | TT_INTEGER | pr ,
-#define NL_INT64(pn, pr, member)       T_ ## member = pn | TT_INT64   | pr ,
-#define NL_BIT(pn, pr, member)         T_ ## member = pn | TT_BIT     | pr ,
-#define NL_STRING(pn, pr, member, len) T_ ## member = pn | TT_STRING  | pr ,
-#include "drbd_nl.h"
-};
-
-struct tag {
-	const char *name;
-	int type_n_flags;
-	int max_len;
-};
-
-/* declare tag names */
-#define NL_PACKET(name, number, fields) fields
-static const struct tag tag_descriptions[] = {
-#define NL_INTEGER(pn, pr, member)     [ pn ] = { #member, TT_INTEGER | pr, sizeof(int)   },
-#define NL_INT64(pn, pr, member)       [ pn ] = { #member, TT_INT64   | pr, sizeof(__u64) },
-#define NL_BIT(pn, pr, member)         [ pn ] = { #member, TT_BIT     | pr, sizeof(int)   },
-#define NL_STRING(pn, pr, member, len) [ pn ] = { #member, TT_STRING  | pr, (len)         },
-#include "drbd_nl.h"
-};
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/ds1286.h b/ANDROID_3.4.5/include/linux/ds1286.h
deleted file mode 100644
index 45ea0aa0..00000000
--- a/ANDROID_3.4.5/include/linux/ds1286.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- * Copyright (C) 1998, 1999, 2003 Ralf Baechle
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#ifndef __LINUX_DS1286_H
-#define __LINUX_DS1286_H
-
-/**********************************************************************
- * register summary
- **********************************************************************/
-#define RTC_HUNDREDTH_SECOND	0
-#define RTC_SECONDS		1
-#define RTC_MINUTES		2
-#define RTC_MINUTES_ALARM	3
-#define RTC_HOURS		4
-#define RTC_HOURS_ALARM		5
-#define RTC_DAY			6
-#define RTC_DAY_ALARM		7
-#define RTC_DATE		8
-#define RTC_MONTH		9
-#define RTC_YEAR		10
-#define RTC_CMD			11
-#define RTC_WHSEC		12
-#define RTC_WSEC		13
-#define RTC_UNUSED		14
-
-/* RTC_*_alarm is always true if 2 MSBs are set */
-# define RTC_ALARM_DONT_CARE 	0xC0
-
-
-/*
- * Bits in the month register
- */
-#define RTC_EOSC		0x80
-#define RTC_ESQW		0x40
-
-/*
- * Bits in the Command register
- */
-#define RTC_TDF			0x01
-#define RTC_WAF			0x02
-#define RTC_TDM			0x04
-#define RTC_WAM			0x08
-#define RTC_PU_LVL		0x10
-#define RTC_IBH_LO		0x20
-#define RTC_IPSW		0x40
-#define RTC_TE			0x80
-
-#endif /* __LINUX_DS1286_H */
diff --git a/ANDROID_3.4.5/include/linux/ds17287rtc.h b/ANDROID_3.4.5/include/linux/ds17287rtc.h
deleted file mode 100644
index d85d3f49..00000000
--- a/ANDROID_3.4.5/include/linux/ds17287rtc.h
+++ /dev/null
@@ -1,66 +0,0 @@
-/*
- * ds17287rtc.h - register definitions for the ds1728[57] RTC / CMOS RAM
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * (C) 2003 Guido Guenther <agx@sigxcpu.org>
- */
-#ifndef __LINUX_DS17287RTC_H
-#define __LINUX_DS17287RTC_H
-
-#include <linux/rtc.h>			/* get the user-level API */
-#include <linux/mc146818rtc.h>
-
-/* Register A */
-#define DS_REGA_DV2	0x40		/* countdown chain */
-#define DS_REGA_DV1	0x20		/* oscillator enable */
-#define DS_REGA_DV0	0x10		/* bank select */
-
-/* bank 1 registers */
-#define DS_B1_MODEL	0x40		/* model number byte */
-#define DS_B1_SN1 	0x41		/* serial number byte 1 */
-#define DS_B1_SN2 	0x42		/* serial number byte 2 */
-#define DS_B1_SN3 	0x43		/* serial number byte 3 */
-#define DS_B1_SN4 	0x44		/* serial number byte 4 */
-#define DS_B1_SN5 	0x45		/* serial number byte 5 */
-#define DS_B1_SN6 	0x46		/* serial number byte 6 */
-#define DS_B1_CRC 	0x47		/* CRC byte */
-#define DS_B1_CENTURY 	0x48		/* Century byte */
-#define DS_B1_DALARM 	0x49		/* date alarm */
-#define DS_B1_XCTRL4A	0x4a		/* extendec control register 4a */
-#define DS_B1_XCTRL4B	0x4b		/* extendec control register 4b */
-#define DS_B1_RTCADDR2 	0x4e		/* rtc address 2 */
-#define DS_B1_RTCADDR3 	0x4f		/* rtc address 3 */
-#define DS_B1_RAMLSB	0x50		/* extended ram LSB */
-#define DS_B1_RAMMSB	0x51		/* extended ram MSB */
-#define DS_B1_RAMDPORT	0x53		/* extended ram data port */
-
-/* register details */
-/* extended control register 4a */
-#define DS_XCTRL4A_VRT2	0x80 		/* valid ram and time */
-#define DS_XCTRL4A_INCR	0x40		/* increment progress status */
-#define DS_XCTRL4A_BME	0x20		/* burst mode enable */
-#define DS_XCTRL4A_PAB	0x08		/* power active bar ctrl */
-#define DS_XCTRL4A_RF	0x04		/* ram clear flag */
-#define DS_XCTRL4A_WF	0x02		/* wake up alarm flag */
-#define DS_XCTRL4A_KF	0x01		/* kickstart flag */
-
-/* interrupt causes */
-#define DS_XCTRL4A_IFS	(DS_XCTRL4A_RF|DS_XCTRL4A_WF|DS_XCTRL4A_KF)
-
-/* extended control register 4b */
-#define DS_XCTRL4B_ABE	0x80 		/* auxiliary battery enable */
-#define DS_XCTRL4B_E32K	0x40		/* enable 32.768 kHz Output */
-#define DS_XCTRL4B_CS	0x20		/* crystal select */
-#define DS_XCTRL4B_RCE	0x10		/* ram clear enable */
-#define DS_XCTRL4B_PRS	0x08		/* PAB resec select */
-#define DS_XCTRL4B_RIE	0x04		/* ram clear interrupt enable */
-#define DS_XCTRL4B_WFE	0x02		/* wake up alarm interrupt enable */
-#define DS_XCTRL4B_KFE	0x01		/* kickstart interrupt enable */
-
-/* interrupt enable bits */
-#define DS_XCTRL4B_IFES	(DS_XCTRL4B_RIE|DS_XCTRL4B_WFE|DS_XCTRL4B_KFE)
-
-#endif /* __LINUX_DS17287RTC_H */
diff --git a/ANDROID_3.4.5/include/linux/ds2782_battery.h b/ANDROID_3.4.5/include/linux/ds2782_battery.h
deleted file mode 100644
index b4e281f6..00000000
--- a/ANDROID_3.4.5/include/linux/ds2782_battery.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef __LINUX_DS2782_BATTERY_H
-#define __LINUX_DS2782_BATTERY_H
-
-struct ds278x_platform_data {
-	int rsns;
-};
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/dtlk.h b/ANDROID_3.4.5/include/linux/dtlk.h
deleted file mode 100644
index 22a7b9a5..00000000
--- a/ANDROID_3.4.5/include/linux/dtlk.h
+++ /dev/null
@@ -1,85 +0,0 @@
-#define DTLK_MINOR	0
-#define DTLK_IO_EXTENT	0x02
-
-	/* ioctl's use magic number of 0xa3 */
-#define DTLK_INTERROGATE 0xa390	/* get settings from the DoubleTalk */
-#define DTLK_STATUS 0xa391	/* get status from the DoubleTalk */
-
-
-#define DTLK_CLEAR 0x18		/* stops speech */
-
-#define DTLK_MAX_RETRIES (loops_per_jiffy/(10000/HZ))
-
-	/* TTS Port Status Flags */
-#define TTS_READABLE     0x80	/* mask for bit which is nonzero if a
-				   byte can be read from the TTS port */
-#define TTS_SPEAKING     0x40	/* mask for SYNC bit, which is nonzero
-				   while DoubleTalk is producing
-				   output with TTS, PCM or CVSD
-				   synthesizers or tone generators
-				   (that is, all but LPC) */
-#define TTS_SPEAKING2    0x20	/* mask for SYNC2 bit,
-				   which falls to zero up to 0.4 sec
-				   before speech stops */
-#define TTS_WRITABLE     0x10	/* mask for RDY bit, which when set to
-             			   1, indicates the TTS port is ready
-             			   to accept a byte of data.  The RDY
-             			   bit goes zero 2-3 usec after
-             			   writing, and goes 1 again 180-190
-             			   usec later. */
-#define TTS_ALMOST_FULL  0x08	/* mask for AF bit: When set to 1,
-				   indicates that less than 300 free
-				   bytes are available in the TTS
-				   input buffer. AF is always 0 in the
-				   PCM, TGN and CVSD modes. */
-#define TTS_ALMOST_EMPTY 0x04	/* mask for AE bit: When set to 1,
-				   indicates that less than 300 bytes
-				   of data remain in DoubleTalk's
-				   input (TTS or PCM) buffer. AE is
-				   always 1 in the TGN and CVSD
-				   modes. */
-
-	/* LPC speak commands */
-#define LPC_5220_NORMAL 0x60	/* 5220 format decoding table, normal rate */
-#define LPC_5220_FAST 0x64	/* 5220 format decoding table, fast rate */
-#define LPC_D6_NORMAL 0x20	/* D6 format decoding table, normal rate */
-#define LPC_D6_FAST 0x24	/* D6 format decoding table, fast rate */
-
-	/* LPC Port Status Flags (valid only after one of the LPC
-           speak commands) */
-#define LPC_SPEAKING     0x80	/* mask for TS bit: When set to 1,
-				   indicates the LPC synthesizer is
-				   producing speech.*/
-#define LPC_BUFFER_LOW   0x40	/* mask for BL bit: When set to 1,
-				   indicates that the hardware LPC
-				   data buffer has less than 30 bytes
-				   remaining. (Total internal buffer
-				   size = 4096 bytes.) */
-#define LPC_BUFFER_EMPTY 0x20	/* mask for BE bit: When set to 1,
-				   indicates that the LPC data buffer
-				   ran out of data (error condition if
-				   TS is also 1).  */
-
-				/* data returned by Interrogate command */
-struct dtlk_settings
-{
-  unsigned short serial_number;	/* 0-7Fh:0-7Fh */
-  unsigned char rom_version[24]; /* null terminated string */
-  unsigned char mode;		/* 0=Character; 1=Phoneme; 2=Text */
-  unsigned char punc_level;	/* nB; 0-7 */
-  unsigned char formant_freq;	/* nF; 0-9 */
-  unsigned char pitch;		/* nP; 0-99 */
-  unsigned char speed;		/* nS; 0-9 */
-  unsigned char volume;		/* nV; 0-9 */
-  unsigned char tone;		/* nX; 0-2 */
-  unsigned char expression;	/* nE; 0-9 */
-  unsigned char ext_dict_loaded; /* 1=exception dictionary loaded */
-  unsigned char ext_dict_status; /* 1=exception dictionary enabled */
-  unsigned char free_ram;	/* # pages (truncated) remaining for
-                                   text buffer */
-  unsigned char articulation;	/* nA; 0-9 */
-  unsigned char reverb;		/* nR; 0-9 */
-  unsigned char eob;		/* 7Fh value indicating end of
-                                   parameter block */
-  unsigned char has_indexing;	/* nonzero if indexing is implemented */
-};
diff --git a/ANDROID_3.4.5/include/linux/dvb/Kbuild b/ANDROID_3.4.5/include/linux/dvb/Kbuild
deleted file mode 100644
index f4dba863..00000000
--- a/ANDROID_3.4.5/include/linux/dvb/Kbuild
+++ /dev/null
@@ -1,8 +0,0 @@
-header-y += audio.h
-header-y += ca.h
-header-y += dmx.h
-header-y += frontend.h
-header-y += net.h
-header-y += osd.h
-header-y += version.h
-header-y += video.h
diff --git a/ANDROID_3.4.5/include/linux/dvb/audio.h b/ANDROID_3.4.5/include/linux/dvb/audio.h
deleted file mode 100644
index d47bccd6..00000000
--- a/ANDROID_3.4.5/include/linux/dvb/audio.h
+++ /dev/null
@@ -1,135 +0,0 @@
-/*
- * audio.h
- *
- * Copyright (C) 2000 Ralph  Metzler <ralph@convergence.de>
- *                  & Marcus Metzler <marcus@convergence.de>
- *                    for convergence integrated media GmbH
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Lesser Public License
- * as published by the Free Software Foundation; either version 2.1
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU Lesser General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- *
- */
-
-#ifndef _DVBAUDIO_H_
-#define _DVBAUDIO_H_
-
-#include <linux/types.h>
-
-typedef enum {
-	AUDIO_SOURCE_DEMUX, /* Select the demux as the main source */
-	AUDIO_SOURCE_MEMORY /* Select internal memory as the main source */
-} audio_stream_source_t;
-
-
-typedef enum {
-	AUDIO_STOPPED,      /* Device is stopped */
-	AUDIO_PLAYING,      /* Device is currently playing */
-	AUDIO_PAUSED        /* Device is paused */
-} audio_play_state_t;
-
-
-typedef enum {
-	AUDIO_STEREO,
-	AUDIO_MONO_LEFT,
-	AUDIO_MONO_RIGHT,
-	AUDIO_MONO,
-	AUDIO_STEREO_SWAPPED
-} audio_channel_select_t;
-
-
-typedef struct audio_mixer {
-	unsigned int volume_left;
-	unsigned int volume_right;
-  // what else do we need? bass, pass-through, ...
-} audio_mixer_t;
-
-
-typedef struct audio_status {
-	int                    AV_sync_state;  /* sync audio and video? */
-	int                    mute_state;     /* audio is muted */
-	audio_play_state_t     play_state;     /* current playback state */
-	audio_stream_source_t  stream_source;  /* current stream source */
-	audio_channel_select_t channel_select; /* currently selected channel */
-	int                    bypass_mode;    /* pass on audio data to */
-	audio_mixer_t	       mixer_state;    /* current mixer state */
-} audio_status_t;                              /* separate decoder hardware */
-
-
-typedef
-struct audio_karaoke {  /* if Vocal1 or Vocal2 are non-zero, they get mixed  */
-	int vocal1;    /* into left and right t at 70% each */
-	int vocal2;    /* if both, Vocal1 and Vocal2 are non-zero, Vocal1 gets*/
-	int melody;    /* mixed into the left channel and */
-		       /* Vocal2 into the right channel at 100% each. */
-		       /* if Melody is non-zero, the melody channel gets mixed*/
-} audio_karaoke_t;     /* into left and right  */
-
-
-typedef __u16 audio_attributes_t;
-/*   bits: descr. */
-/*   15-13 audio coding mode (0=ac3, 2=mpeg1, 3=mpeg2ext, 4=LPCM, 6=DTS, */
-/*   12    multichannel extension */
-/*   11-10 audio type (0=not spec, 1=language included) */
-/*    9- 8 audio application mode (0=not spec, 1=karaoke, 2=surround) */
-/*    7- 6 Quantization / DRC (mpeg audio: 1=DRC exists)(lpcm: 0=16bit,  */
-/*    5- 4 Sample frequency fs (0=48kHz, 1=96kHz) */
-/*    2- 0 number of audio channels (n+1 channels) */
-
-
-/* for GET_CAPABILITIES and SET_FORMAT, the latter should only set one bit */
-#define AUDIO_CAP_DTS    1
-#define AUDIO_CAP_LPCM   2
-#define AUDIO_CAP_MP1    4
-#define AUDIO_CAP_MP2    8
-#define AUDIO_CAP_MP3   16
-#define AUDIO_CAP_AAC   32
-#define AUDIO_CAP_OGG   64
-#define AUDIO_CAP_SDDS 128
-#define AUDIO_CAP_AC3  256
-
-#define AUDIO_STOP                 _IO('o', 1)
-#define AUDIO_PLAY                 _IO('o', 2)
-#define AUDIO_PAUSE                _IO('o', 3)
-#define AUDIO_CONTINUE             _IO('o', 4)
-#define AUDIO_SELECT_SOURCE        _IO('o', 5)
-#define AUDIO_SET_MUTE             _IO('o', 6)
-#define AUDIO_SET_AV_SYNC          _IO('o', 7)
-#define AUDIO_SET_BYPASS_MODE      _IO('o', 8)
-#define AUDIO_CHANNEL_SELECT       _IO('o', 9)
-#define AUDIO_GET_STATUS           _IOR('o', 10, audio_status_t)
-
-#define AUDIO_GET_CAPABILITIES     _IOR('o', 11, unsigned int)
-#define AUDIO_CLEAR_BUFFER         _IO('o',  12)
-#define AUDIO_SET_ID               _IO('o', 13)
-#define AUDIO_SET_MIXER            _IOW('o', 14, audio_mixer_t)
-#define AUDIO_SET_STREAMTYPE       _IO('o', 15)
-#define AUDIO_SET_EXT_ID           _IO('o', 16)
-#define AUDIO_SET_ATTRIBUTES       _IOW('o', 17, audio_attributes_t)
-#define AUDIO_SET_KARAOKE          _IOW('o', 18, audio_karaoke_t)
-
-/**
- * AUDIO_GET_PTS
- *
- * Read the 33 bit presentation time stamp as defined
- * in ITU T-REC-H.222.0 / ISO/IEC 13818-1.
- *
- * The PTS should belong to the currently played
- * frame if possible, but may also be a value close to it
- * like the PTS of the last decoded frame or the last PTS
- * extracted by the PES parser.
- */
-#define AUDIO_GET_PTS              _IOR('o', 19, __u64)
-#define AUDIO_BILINGUAL_CHANNEL_SELECT _IO('o', 20)
-
-#endif /* _DVBAUDIO_H_ */
diff --git a/ANDROID_3.4.5/include/linux/dvb/ca.h b/ANDROID_3.4.5/include/linux/dvb/ca.h
deleted file mode 100644
index c18537f3..00000000
--- a/ANDROID_3.4.5/include/linux/dvb/ca.h
+++ /dev/null
@@ -1,90 +0,0 @@
-/*
- * ca.h
- *
- * Copyright (C) 2000 Ralph  Metzler <ralph@convergence.de>
- *                  & Marcus Metzler <marcus@convergence.de>
- *                    for convergence integrated media GmbH
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Lesser Public License
- * as published by the Free Software Foundation; either version 2.1
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU Lesser General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- *
- */
-
-#ifndef _DVBCA_H_
-#define _DVBCA_H_
-
-/* slot interface types and info */
-
-typedef struct ca_slot_info {
-	int num;               /* slot number */
-
-	int type;              /* CA interface this slot supports */
-#define CA_CI            1     /* CI high level interface */
-#define CA_CI_LINK       2     /* CI link layer level interface */
-#define CA_CI_PHYS       4     /* CI physical layer level interface */
-#define CA_DESCR         8     /* built-in descrambler */
-#define CA_SC          128     /* simple smart card interface */
-
-	unsigned int flags;
-#define CA_CI_MODULE_PRESENT 1 /* module (or card) inserted */
-#define CA_CI_MODULE_READY   2
-} ca_slot_info_t;
-
-
-/* descrambler types and info */
-
-typedef struct ca_descr_info {
-	unsigned int num;          /* number of available descramblers (keys) */
-	unsigned int type;         /* type of supported scrambling system */
-#define CA_ECD           1
-#define CA_NDS           2
-#define CA_DSS           4
-} ca_descr_info_t;
-
-typedef struct ca_caps {
-	unsigned int slot_num;     /* total number of CA card and module slots */
-	unsigned int slot_type;    /* OR of all supported types */
-	unsigned int descr_num;    /* total number of descrambler slots (keys) */
-	unsigned int descr_type;   /* OR of all supported types */
-} ca_caps_t;
-
-/* a message to/from a CI-CAM */
-typedef struct ca_msg {
-	unsigned int index;
-	unsigned int type;
-	unsigned int length;
-	unsigned char msg[256];
-} ca_msg_t;
-
-typedef struct ca_descr {
-	unsigned int index;
-	unsigned int parity;	/* 0 == even, 1 == odd */
-	unsigned char cw[8];
-} ca_descr_t;
-
-typedef struct ca_pid {
-	unsigned int pid;
-	int index;		/* -1 == disable*/
-} ca_pid_t;
-
-#define CA_RESET          _IO('o', 128)
-#define CA_GET_CAP        _IOR('o', 129, ca_caps_t)
-#define CA_GET_SLOT_INFO  _IOR('o', 130, ca_slot_info_t)
-#define CA_GET_DESCR_INFO _IOR('o', 131, ca_descr_info_t)
-#define CA_GET_MSG        _IOR('o', 132, ca_msg_t)
-#define CA_SEND_MSG       _IOW('o', 133, ca_msg_t)
-#define CA_SET_DESCR      _IOW('o', 134, ca_descr_t)
-#define CA_SET_PID        _IOW('o', 135, ca_pid_t)
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/dvb/dmx.h b/ANDROID_3.4.5/include/linux/dvb/dmx.h
deleted file mode 100644
index f078f3ac..00000000
--- a/ANDROID_3.4.5/include/linux/dvb/dmx.h
+++ /dev/null
@@ -1,157 +0,0 @@
-/*
- * dmx.h
- *
- * Copyright (C) 2000 Marcus Metzler <marcus@convergence.de>
- *                  & Ralph  Metzler <ralph@convergence.de>
- *                    for convergence integrated media GmbH
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU Lesser General Public License
- * as published by the Free Software Foundation; either version 2.1
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU Lesser General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- *
- */
-
-#ifndef _DVBDMX_H_
-#define _DVBDMX_H_
-
-#include <linux/types.h>
-#ifdef __KERNEL__
-#include <linux/time.h>
-#else
-#include <time.h>
-#endif
-
-
-#define DMX_FILTER_SIZE 16
-
-typedef enum
-{
-	DMX_OUT_DECODER, /* Streaming directly to decoder. */
-	DMX_OUT_TAP,     /* Output going to a memory buffer */
-			 /* (to be retrieved via the read command).*/
-	DMX_OUT_TS_TAP,  /* Output multiplexed into a new TS  */
-			 /* (to be retrieved by reading from the */
-			 /* logical DVR device).                 */
-	DMX_OUT_TSDEMUX_TAP /* Like TS_TAP but retrieved from the DMX device */
-} dmx_output_t;
-
-
-typedef enum
-{
-	DMX_IN_FRONTEND, /* Input from a front-end device.  */
-	DMX_IN_DVR       /* Input from the logical DVR device.  */
-} dmx_input_t;
-
-
-typedef enum
-{
-	DMX_PES_AUDIO0,
-	DMX_PES_VIDEO0,
-	DMX_PES_TELETEXT0,
-	DMX_PES_SUBTITLE0,
-	DMX_PES_PCR0,
-
-	DMX_PES_AUDIO1,
-	DMX_PES_VIDEO1,
-	DMX_PES_TELETEXT1,
-	DMX_PES_SUBTITLE1,
-	DMX_PES_PCR1,
-
-	DMX_PES_AUDIO2,
-	DMX_PES_VIDEO2,
-	DMX_PES_TELETEXT2,
-	DMX_PES_SUBTITLE2,
-	DMX_PES_PCR2,
-
-	DMX_PES_AUDIO3,
-	DMX_PES_VIDEO3,
-	DMX_PES_TELETEXT3,
-	DMX_PES_SUBTITLE3,
-	DMX_PES_PCR3,
-
-	DMX_PES_OTHER
-} dmx_pes_type_t;
-
-#define DMX_PES_AUDIO    DMX_PES_AUDIO0
-#define DMX_PES_VIDEO    DMX_PES_VIDEO0
-#define DMX_PES_TELETEXT DMX_PES_TELETEXT0
-#define DMX_PES_SUBTITLE DMX_PES_SUBTITLE0
-#define DMX_PES_PCR      DMX_PES_PCR0
-
-
-typedef struct dmx_filter
-{
-	__u8  filter[DMX_FILTER_SIZE];
-	__u8  mask[DMX_FILTER_SIZE];
-	__u8  mode[DMX_FILTER_SIZE];
-} dmx_filter_t;
-
-
-struct dmx_sct_filter_params
-{
-	__u16          pid;
-	dmx_filter_t   filter;
-	__u32          timeout;
-	__u32          flags;
-#define DMX_CHECK_CRC       1
-#define DMX_ONESHOT         2
-#define DMX_IMMEDIATE_START 4
-#define DMX_KERNEL_CLIENT   0x8000
-};
-
-
-struct dmx_pes_filter_params
-{
-	__u16          pid;
-	dmx_input_t    input;
-	dmx_output_t   output;
-	dmx_pes_type_t pes_type;
-	__u32          flags;
-};
-
-typedef struct dmx_caps {
-	__u32 caps;
-	int num_decoders;
-} dmx_caps_t;
-
-typedef enum {
-	DMX_SOURCE_FRONT0 = 0,
-	DMX_SOURCE_FRONT1,
-	DMX_SOURCE_FRONT2,
-	DMX_SOURCE_FRONT3,
-	DMX_SOURCE_DVR0   = 16,
-	DMX_SOURCE_DVR1,
-	DMX_SOURCE_DVR2,
-	DMX_SOURCE_DVR3
-} dmx_source_t;
-
-struct dmx_stc {
-	unsigned int num;	/* input : which STC? 0..N */
-	unsigned int base;	/* output: divisor for stc to get 90 kHz clock */
-	__u64 stc;		/* output: stc in 'base'*90 kHz units */
-};
-
-
-#define DMX_START                _IO('o', 41)
-#define DMX_STOP                 _IO('o', 42)
-#define DMX_SET_FILTER           _IOW('o', 43, struct dmx_sct_filter_params)
-#define DMX_SET_PES_FILTER       _IOW('o', 44, struct dmx_pes_filter_params)
-#define DMX_SET_BUFFER_SIZE      _IO('o', 45)
-#define DMX_GET_PES_PIDS         _IOR('o', 47, __u16[5])
-#define DMX_GET_CAPS             _IOR('o', 48, dmx_caps_t)
-#define DMX_SET_SOURCE           _IOW('o', 49, dmx_source_t)
-#define DMX_GET_STC              _IOWR('o', 50, struct dmx_stc)
-#define DMX_ADD_PID              _IOW('o', 51, __u16)
-#define DMX_REMOVE_PID           _IOW('o', 52, __u16)
-
-#endif /*_DVBDMX_H_*/
diff --git a/ANDROID_3.4.5/include/linux/dvb/frontend.h b/ANDROID_3.4.5/include/linux/dvb/frontend.h
deleted file mode 100644
index cb4428ab..00000000
--- a/ANDROID_3.4.5/include/linux/dvb/frontend.h
+++ /dev/null
@@ -1,436 +0,0 @@
-/*
- * frontend.h
- *
- * Copyright (C) 2000 Marcus Metzler <marcus@convergence.de>
- *		    Ralph  Metzler <ralph@convergence.de>
- *		    Holger Waechtler <holger@convergence.de>
- *		    Andre Draszik <ad@convergence.de>
- *		    for convergence integrated media GmbH
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU Lesser General Public License
- * as published by the Free Software Foundation; either version 2.1
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU Lesser General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- *
- */
-
-#ifndef _DVBFRONTEND_H_
-#define _DVBFRONTEND_H_
-
-#include <linux/types.h>
-
-typedef enum fe_type {
-	FE_QPSK,
-	FE_QAM,
-	FE_OFDM,
-	FE_ATSC
-} fe_type_t;
-
-
-typedef enum fe_caps {
-	FE_IS_STUPID			= 0,
-	FE_CAN_INVERSION_AUTO		= 0x1,
-	FE_CAN_FEC_1_2			= 0x2,
-	FE_CAN_FEC_2_3			= 0x4,
-	FE_CAN_FEC_3_4			= 0x8,
-	FE_CAN_FEC_4_5			= 0x10,
-	FE_CAN_FEC_5_6			= 0x20,
-	FE_CAN_FEC_6_7			= 0x40,
-	FE_CAN_FEC_7_8			= 0x80,
-	FE_CAN_FEC_8_9			= 0x100,
-	FE_CAN_FEC_AUTO			= 0x200,
-	FE_CAN_QPSK			= 0x400,
-	FE_CAN_QAM_16			= 0x800,
-	FE_CAN_QAM_32			= 0x1000,
-	FE_CAN_QAM_64			= 0x2000,
-	FE_CAN_QAM_128			= 0x4000,
-	FE_CAN_QAM_256			= 0x8000,
-	FE_CAN_QAM_AUTO			= 0x10000,
-	FE_CAN_TRANSMISSION_MODE_AUTO	= 0x20000,
-	FE_CAN_BANDWIDTH_AUTO		= 0x40000,
-	FE_CAN_GUARD_INTERVAL_AUTO	= 0x80000,
-	FE_CAN_HIERARCHY_AUTO		= 0x100000,
-	FE_CAN_8VSB			= 0x200000,
-	FE_CAN_16VSB			= 0x400000,
-	FE_HAS_EXTENDED_CAPS		= 0x800000,   /* We need more bitspace for newer APIs, indicate this. */
-	FE_CAN_TURBO_FEC		= 0x8000000,  /* frontend supports "turbo fec modulation" */
-	FE_CAN_2G_MODULATION		= 0x10000000, /* frontend supports "2nd generation modulation" (DVB-S2) */
-	FE_NEEDS_BENDING		= 0x20000000, /* not supported anymore, don't use (frontend requires frequency bending) */
-	FE_CAN_RECOVER			= 0x40000000, /* frontend can recover from a cable unplug automatically */
-	FE_CAN_MUTE_TS			= 0x80000000  /* frontend can stop spurious TS data output */
-} fe_caps_t;
-
-
-struct dvb_frontend_info {
-	char       name[128];
-	fe_type_t  type;			/* DEPRECATED. Use DTV_ENUM_DELSYS instead */
-	__u32      frequency_min;
-	__u32      frequency_max;
-	__u32      frequency_stepsize;
-	__u32      frequency_tolerance;
-	__u32      symbol_rate_min;
-	__u32      symbol_rate_max;
-	__u32      symbol_rate_tolerance;	/* ppm */
-	__u32      notifier_delay;		/* DEPRECATED */
-	fe_caps_t  caps;
-};
-
-
-/**
- *  Check out the DiSEqC bus spec available on http://www.eutelsat.org/ for
- *  the meaning of this struct...
- */
-struct dvb_diseqc_master_cmd {
-	__u8 msg [6];	/*  { framing, address, command, data [3] } */
-	__u8 msg_len;	/*  valid values are 3...6  */
-};
-
-
-struct dvb_diseqc_slave_reply {
-	__u8 msg [4];	/*  { framing, data [3] } */
-	__u8 msg_len;	/*  valid values are 0...4, 0 means no msg  */
-	int  timeout;	/*  return from ioctl after timeout ms with */
-};			/*  errorcode when no message was received  */
-
-
-typedef enum fe_sec_voltage {
-	SEC_VOLTAGE_13,
-	SEC_VOLTAGE_18,
-	SEC_VOLTAGE_OFF
-} fe_sec_voltage_t;
-
-
-typedef enum fe_sec_tone_mode {
-	SEC_TONE_ON,
-	SEC_TONE_OFF
-} fe_sec_tone_mode_t;
-
-
-typedef enum fe_sec_mini_cmd {
-	SEC_MINI_A,
-	SEC_MINI_B
-} fe_sec_mini_cmd_t;
-
-
-typedef enum fe_status {
-	FE_HAS_SIGNAL	= 0x01,   /* found something above the noise level */
-	FE_HAS_CARRIER	= 0x02,   /* found a DVB signal  */
-	FE_HAS_VITERBI	= 0x04,   /* FEC is stable  */
-	FE_HAS_SYNC	= 0x08,   /* found sync bytes  */
-	FE_HAS_LOCK	= 0x10,   /* everything's working... */
-	FE_TIMEDOUT	= 0x20,   /* no lock within the last ~2 seconds */
-	FE_REINIT	= 0x40    /* frontend was reinitialized,  */
-} fe_status_t;			  /* application is recommended to reset */
-				  /* DiSEqC, tone and parameters */
-
-typedef enum fe_spectral_inversion {
-	INVERSION_OFF,
-	INVERSION_ON,
-	INVERSION_AUTO
-} fe_spectral_inversion_t;
-
-
-typedef enum fe_code_rate {
-	FEC_NONE = 0,
-	FEC_1_2,
-	FEC_2_3,
-	FEC_3_4,
-	FEC_4_5,
-	FEC_5_6,
-	FEC_6_7,
-	FEC_7_8,
-	FEC_8_9,
-	FEC_AUTO,
-	FEC_3_5,
-	FEC_9_10,
-} fe_code_rate_t;
-
-
-typedef enum fe_modulation {
-	QPSK,
-	QAM_16,
-	QAM_32,
-	QAM_64,
-	QAM_128,
-	QAM_256,
-	QAM_AUTO,
-	VSB_8,
-	VSB_16,
-	PSK_8,
-	APSK_16,
-	APSK_32,
-	DQPSK,
-} fe_modulation_t;
-
-typedef enum fe_transmit_mode {
-	TRANSMISSION_MODE_2K,
-	TRANSMISSION_MODE_8K,
-	TRANSMISSION_MODE_AUTO,
-	TRANSMISSION_MODE_4K,
-	TRANSMISSION_MODE_1K,
-	TRANSMISSION_MODE_16K,
-	TRANSMISSION_MODE_32K,
-} fe_transmit_mode_t;
-
-#if defined(__DVB_CORE__) || !defined (__KERNEL__)
-typedef enum fe_bandwidth {
-	BANDWIDTH_8_MHZ,
-	BANDWIDTH_7_MHZ,
-	BANDWIDTH_6_MHZ,
-	BANDWIDTH_AUTO,
-	BANDWIDTH_5_MHZ,
-	BANDWIDTH_10_MHZ,
-	BANDWIDTH_1_712_MHZ,
-} fe_bandwidth_t;
-#endif
-
-typedef enum fe_guard_interval {
-	GUARD_INTERVAL_1_32,
-	GUARD_INTERVAL_1_16,
-	GUARD_INTERVAL_1_8,
-	GUARD_INTERVAL_1_4,
-	GUARD_INTERVAL_AUTO,
-	GUARD_INTERVAL_1_128,
-	GUARD_INTERVAL_19_128,
-	GUARD_INTERVAL_19_256,
-} fe_guard_interval_t;
-
-
-typedef enum fe_hierarchy {
-	HIERARCHY_NONE,
-	HIERARCHY_1,
-	HIERARCHY_2,
-	HIERARCHY_4,
-	HIERARCHY_AUTO
-} fe_hierarchy_t;
-
-
-#if defined(__DVB_CORE__) || !defined (__KERNEL__)
-struct dvb_qpsk_parameters {
-	__u32		symbol_rate;  /* symbol rate in Symbols per second */
-	fe_code_rate_t	fec_inner;    /* forward error correction (see above) */
-};
-
-struct dvb_qam_parameters {
-	__u32		symbol_rate; /* symbol rate in Symbols per second */
-	fe_code_rate_t	fec_inner;   /* forward error correction (see above) */
-	fe_modulation_t	modulation;  /* modulation type (see above) */
-};
-
-struct dvb_vsb_parameters {
-	fe_modulation_t	modulation;  /* modulation type (see above) */
-};
-
-struct dvb_ofdm_parameters {
-	fe_bandwidth_t      bandwidth;
-	fe_code_rate_t      code_rate_HP;  /* high priority stream code rate */
-	fe_code_rate_t      code_rate_LP;  /* low priority stream code rate */
-	fe_modulation_t     constellation; /* modulation type (see above) */
-	fe_transmit_mode_t  transmission_mode;
-	fe_guard_interval_t guard_interval;
-	fe_hierarchy_t      hierarchy_information;
-};
-
-
-struct dvb_frontend_parameters {
-	__u32 frequency;     /* (absolute) frequency in Hz for QAM/OFDM/ATSC */
-			     /* intermediate frequency in kHz for QPSK */
-	fe_spectral_inversion_t inversion;
-	union {
-		struct dvb_qpsk_parameters qpsk;
-		struct dvb_qam_parameters  qam;
-		struct dvb_ofdm_parameters ofdm;
-		struct dvb_vsb_parameters vsb;
-	} u;
-};
-
-struct dvb_frontend_event {
-	fe_status_t status;
-	struct dvb_frontend_parameters parameters;
-};
-#endif
-
-/* S2API Commands */
-#define DTV_UNDEFINED		0
-#define DTV_TUNE		1
-#define DTV_CLEAR		2
-#define DTV_FREQUENCY		3
-#define DTV_MODULATION		4
-#define DTV_BANDWIDTH_HZ	5
-#define DTV_INVERSION		6
-#define DTV_DISEQC_MASTER	7
-#define DTV_SYMBOL_RATE		8
-#define DTV_INNER_FEC		9
-#define DTV_VOLTAGE		10
-#define DTV_TONE		11
-#define DTV_PILOT		12
-#define DTV_ROLLOFF		13
-#define DTV_DISEQC_SLAVE_REPLY	14
-
-/* Basic enumeration set for querying unlimited capabilities */
-#define DTV_FE_CAPABILITY_COUNT	15
-#define DTV_FE_CAPABILITY	16
-#define DTV_DELIVERY_SYSTEM	17
-
-/* ISDB-T and ISDB-Tsb */
-#define DTV_ISDBT_PARTIAL_RECEPTION	18
-#define DTV_ISDBT_SOUND_BROADCASTING	19
-
-#define DTV_ISDBT_SB_SUBCHANNEL_ID	20
-#define DTV_ISDBT_SB_SEGMENT_IDX	21
-#define DTV_ISDBT_SB_SEGMENT_COUNT	22
-
-#define DTV_ISDBT_LAYERA_FEC			23
-#define DTV_ISDBT_LAYERA_MODULATION		24
-#define DTV_ISDBT_LAYERA_SEGMENT_COUNT		25
-#define DTV_ISDBT_LAYERA_TIME_INTERLEAVING	26
-
-#define DTV_ISDBT_LAYERB_FEC			27
-#define DTV_ISDBT_LAYERB_MODULATION		28
-#define DTV_ISDBT_LAYERB_SEGMENT_COUNT		29
-#define DTV_ISDBT_LAYERB_TIME_INTERLEAVING	30
-
-#define DTV_ISDBT_LAYERC_FEC			31
-#define DTV_ISDBT_LAYERC_MODULATION		32
-#define DTV_ISDBT_LAYERC_SEGMENT_COUNT		33
-#define DTV_ISDBT_LAYERC_TIME_INTERLEAVING	34
-
-#define DTV_API_VERSION		35
-
-#define DTV_CODE_RATE_HP	36
-#define DTV_CODE_RATE_LP	37
-#define DTV_GUARD_INTERVAL	38
-#define DTV_TRANSMISSION_MODE	39
-#define DTV_HIERARCHY		40
-
-#define DTV_ISDBT_LAYER_ENABLED	41
-
-#define DTV_ISDBS_TS_ID		42
-
-#define DTV_DVBT2_PLP_ID	43
-
-#define DTV_ENUM_DELSYS		44
-
-#define DTV_MAX_COMMAND				DTV_ENUM_DELSYS
-
-typedef enum fe_pilot {
-	PILOT_ON,
-	PILOT_OFF,
-	PILOT_AUTO,
-} fe_pilot_t;
-
-typedef enum fe_rolloff {
-	ROLLOFF_35, /* Implied value in DVB-S, default for DVB-S2 */
-	ROLLOFF_20,
-	ROLLOFF_25,
-	ROLLOFF_AUTO,
-} fe_rolloff_t;
-
-typedef enum fe_delivery_system {
-	SYS_UNDEFINED,
-	SYS_DVBC_ANNEX_A,
-	SYS_DVBC_ANNEX_B,
-	SYS_DVBT,
-	SYS_DSS,
-	SYS_DVBS,
-	SYS_DVBS2,
-	SYS_DVBH,
-	SYS_ISDBT,
-	SYS_ISDBS,
-	SYS_ISDBC,
-	SYS_ATSC,
-	SYS_ATSCMH,
-	SYS_DMBTH,
-	SYS_CMMB,
-	SYS_DAB,
-	SYS_DVBT2,
-	SYS_TURBO,
-	SYS_DVBC_ANNEX_C,
-} fe_delivery_system_t;
-
-
-#define SYS_DVBC_ANNEX_AC	SYS_DVBC_ANNEX_A
-
-
-struct dtv_cmds_h {
-	char	*name;		/* A display name for debugging purposes */
-
-	__u32	cmd;		/* A unique ID */
-
-	/* Flags */
-	__u32	set:1;		/* Either a set or get property */
-	__u32	buffer:1;	/* Does this property use the buffer? */
-	__u32	reserved:30;	/* Align */
-};
-
-struct dtv_property {
-	__u32 cmd;
-	__u32 reserved[3];
-	union {
-		__u32 data;
-		struct {
-			__u8 data[32];
-			__u32 len;
-			__u32 reserved1[3];
-			void *reserved2;
-		} buffer;
-	} u;
-	int result;
-} __attribute__ ((packed));
-
-/* num of properties cannot exceed DTV_IOCTL_MAX_MSGS per ioctl */
-#define DTV_IOCTL_MAX_MSGS 64
-
-struct dtv_properties {
-	__u32 num;
-	struct dtv_property *props;
-};
-
-#define FE_SET_PROPERTY		   _IOW('o', 82, struct dtv_properties)
-#define FE_GET_PROPERTY		   _IOR('o', 83, struct dtv_properties)
-
-
-/**
- * When set, this flag will disable any zigzagging or other "normal" tuning
- * behaviour. Additionally, there will be no automatic monitoring of the lock
- * status, and hence no frontend events will be generated. If a frontend device
- * is closed, this flag will be automatically turned off when the device is
- * reopened read-write.
- */
-#define FE_TUNE_MODE_ONESHOT 0x01
-
-
-#define FE_GET_INFO		   _IOR('o', 61, struct dvb_frontend_info)
-
-#define FE_DISEQC_RESET_OVERLOAD   _IO('o', 62)
-#define FE_DISEQC_SEND_MASTER_CMD  _IOW('o', 63, struct dvb_diseqc_master_cmd)
-#define FE_DISEQC_RECV_SLAVE_REPLY _IOR('o', 64, struct dvb_diseqc_slave_reply)
-#define FE_DISEQC_SEND_BURST       _IO('o', 65)  /* fe_sec_mini_cmd_t */
-
-#define FE_SET_TONE		   _IO('o', 66)  /* fe_sec_tone_mode_t */
-#define FE_SET_VOLTAGE		   _IO('o', 67)  /* fe_sec_voltage_t */
-#define FE_ENABLE_HIGH_LNB_VOLTAGE _IO('o', 68)  /* int */
-
-#define FE_READ_STATUS		   _IOR('o', 69, fe_status_t)
-#define FE_READ_BER		   _IOR('o', 70, __u32)
-#define FE_READ_SIGNAL_STRENGTH    _IOR('o', 71, __u16)
-#define FE_READ_SNR		   _IOR('o', 72, __u16)
-#define FE_READ_UNCORRECTED_BLOCKS _IOR('o', 73, __u32)
-
-#define FE_SET_FRONTEND		   _IOW('o', 76, struct dvb_frontend_parameters)
-#define FE_GET_FRONTEND		   _IOR('o', 77, struct dvb_frontend_parameters)
-#define FE_SET_FRONTEND_TUNE_MODE  _IO('o', 81) /* unsigned int */
-#define FE_GET_EVENT		   _IOR('o', 78, struct dvb_frontend_event)
-
-#define FE_DISHNETWORK_SEND_LEGACY_CMD _IO('o', 80) /* unsigned int */
-
-#endif /*_DVBFRONTEND_H_*/
diff --git a/ANDROID_3.4.5/include/linux/dvb/net.h b/ANDROID_3.4.5/include/linux/dvb/net.h
deleted file mode 100644
index f451e7eb..00000000
--- a/ANDROID_3.4.5/include/linux/dvb/net.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- * net.h
- *
- * Copyright (C) 2000 Marcus Metzler <marcus@convergence.de>
- *                  & Ralph  Metzler <ralph@convergence.de>
- *                    for convergence integrated media GmbH
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU Lesser General Public License
- * as published by the Free Software Foundation; either version 2.1
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU Lesser General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- *
- */
-
-#ifndef _DVBNET_H_
-#define _DVBNET_H_
-
-#include <linux/types.h>
-
-struct dvb_net_if {
-	__u16 pid;
-	__u16 if_num;
-	__u8  feedtype;
-#define DVB_NET_FEEDTYPE_MPE 0	/* multi protocol encapsulation */
-#define DVB_NET_FEEDTYPE_ULE 1	/* ultra lightweight encapsulation */
-};
-
-
-#define NET_ADD_IF    _IOWR('o', 52, struct dvb_net_if)
-#define NET_REMOVE_IF _IO('o', 53)
-#define NET_GET_IF    _IOWR('o', 54, struct dvb_net_if)
-
-
-/* binary compatibility cruft: */
-struct __dvb_net_if_old {
-	__u16 pid;
-	__u16 if_num;
-};
-#define __NET_ADD_IF_OLD _IOWR('o', 52, struct __dvb_net_if_old)
-#define __NET_GET_IF_OLD _IOWR('o', 54, struct __dvb_net_if_old)
-
-
-#endif /*_DVBNET_H_*/
diff --git a/ANDROID_3.4.5/include/linux/dvb/osd.h b/ANDROID_3.4.5/include/linux/dvb/osd.h
deleted file mode 100644
index 880e6843..00000000
--- a/ANDROID_3.4.5/include/linux/dvb/osd.h
+++ /dev/null
@@ -1,144 +0,0 @@
-/*
- * osd.h
- *
- * Copyright (C) 2001 Ralph  Metzler <ralph@convergence.de>
- *                  & Marcus Metzler <marcus@convergence.de>
- *                    for convergence integrated media GmbH
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Lesser Public License
- * as published by the Free Software Foundation; either version 2.1
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU Lesser General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- *
- */
-
-#ifndef _DVBOSD_H_
-#define _DVBOSD_H_
-
-#include <linux/compiler.h>
-
-typedef enum {
-  // All functions return -2 on "not open"
-  OSD_Close=1,    // ()
-  // Disables OSD and releases the buffers
-  // returns 0 on success
-  OSD_Open,       // (x0,y0,x1,y1,BitPerPixel[2/4/8](color&0x0F),mix[0..15](color&0xF0))
-  // Opens OSD with this size and bit depth
-  // returns 0 on success, -1 on DRAM allocation error, -2 on "already open"
-  OSD_Show,       // ()
-  // enables OSD mode
-  // returns 0 on success
-  OSD_Hide,       // ()
-  // disables OSD mode
-  // returns 0 on success
-  OSD_Clear,      // ()
-  // Sets all pixel to color 0
-  // returns 0 on success
-  OSD_Fill,       // (color)
-  // Sets all pixel to color <col>
-  // returns 0 on success
-  OSD_SetColor,   // (color,R{x0},G{y0},B{x1},opacity{y1})
-  // set palette entry <num> to <r,g,b>, <mix> and <trans> apply
-  // R,G,B: 0..255
-  // R=Red, G=Green, B=Blue
-  // opacity=0:      pixel opacity 0% (only video pixel shows)
-  // opacity=1..254: pixel opacity as specified in header
-  // opacity=255:    pixel opacity 100% (only OSD pixel shows)
-  // returns 0 on success, -1 on error
-  OSD_SetPalette, // (firstcolor{color},lastcolor{x0},data)
-  // Set a number of entries in the palette
-  // sets the entries "firstcolor" through "lastcolor" from the array "data"
-  // data has 4 byte for each color:
-  // R,G,B, and a opacity value: 0->transparent, 1..254->mix, 255->pixel
-  OSD_SetTrans,   // (transparency{color})
-  // Sets transparency of mixed pixel (0..15)
-  // returns 0 on success
-  OSD_SetPixel,   // (x0,y0,color)
-  // sets pixel <x>,<y> to color number <col>
-  // returns 0 on success, -1 on error
-  OSD_GetPixel,   // (x0,y0)
-  // returns color number of pixel <x>,<y>,  or -1
-  OSD_SetRow,     // (x0,y0,x1,data)
-  // fills pixels x0,y through  x1,y with the content of data[]
-  // returns 0 on success, -1 on clipping all pixel (no pixel drawn)
-  OSD_SetBlock,   // (x0,y0,x1,y1,increment{color},data)
-  // fills pixels x0,y0 through  x1,y1 with the content of data[]
-  // inc contains the width of one line in the data block,
-  // inc<=0 uses blockwidth as linewidth
-  // returns 0 on success, -1 on clipping all pixel
-  OSD_FillRow,    // (x0,y0,x1,color)
-  // fills pixels x0,y through  x1,y with the color <col>
-  // returns 0 on success, -1 on clipping all pixel
-  OSD_FillBlock,  // (x0,y0,x1,y1,color)
-  // fills pixels x0,y0 through  x1,y1 with the color <col>
-  // returns 0 on success, -1 on clipping all pixel
-  OSD_Line,       // (x0,y0,x1,y1,color)
-  // draw a line from x0,y0 to x1,y1 with the color <col>
-  // returns 0 on success
-  OSD_Query,      // (x0,y0,x1,y1,xasp{color}}), yasp=11
-  // fills parameters with the picture dimensions and the pixel aspect ratio
-  // returns 0 on success
-  OSD_Test,       // ()
-  // draws a test picture. for debugging purposes only
-  // returns 0 on success
-// TODO: remove "test" in final version
-  OSD_Text,       // (x0,y0,size,color,text)
-  OSD_SetWindow, //  (x0) set window with number 0<x0<8 as current
-  OSD_MoveWindow, //  move current window to (x0, y0)
-  OSD_OpenRaw,	// Open other types of OSD windows
-} OSD_Command;
-
-typedef struct osd_cmd_s {
-	OSD_Command cmd;
-	int x0;
-	int y0;
-	int x1;
-	int y1;
-	int color;
-	void __user *data;
-} osd_cmd_t;
-
-/* OSD_OpenRaw: set 'color' to desired window type */
-typedef enum {
-	OSD_BITMAP1,           /* 1 bit bitmap */
-	OSD_BITMAP2,           /* 2 bit bitmap */
-	OSD_BITMAP4,           /* 4 bit bitmap */
-	OSD_BITMAP8,           /* 8 bit bitmap */
-	OSD_BITMAP1HR,         /* 1 Bit bitmap half resolution */
-	OSD_BITMAP2HR,         /* 2 bit bitmap half resolution */
-	OSD_BITMAP4HR,         /* 4 bit bitmap half resolution */
-	OSD_BITMAP8HR,         /* 8 bit bitmap half resolution */
-	OSD_YCRCB422,          /* 4:2:2 YCRCB Graphic Display */
-	OSD_YCRCB444,          /* 4:4:4 YCRCB Graphic Display */
-	OSD_YCRCB444HR,        /* 4:4:4 YCRCB graphic half resolution */
-	OSD_VIDEOTSIZE,        /* True Size Normal MPEG Video Display */
-	OSD_VIDEOHSIZE,        /* MPEG Video Display Half Resolution */
-	OSD_VIDEOQSIZE,        /* MPEG Video Display Quarter Resolution */
-	OSD_VIDEODSIZE,        /* MPEG Video Display Double Resolution */
-	OSD_VIDEOTHSIZE,       /* True Size MPEG Video Display Half Resolution */
-	OSD_VIDEOTQSIZE,       /* True Size MPEG Video Display Quarter Resolution*/
-	OSD_VIDEOTDSIZE,       /* True Size MPEG Video Display Double Resolution */
-	OSD_VIDEONSIZE,        /* Full Size MPEG Video Display */
-	OSD_CURSOR             /* Cursor */
-} osd_raw_window_t;
-
-typedef struct osd_cap_s {
-	int  cmd;
-#define OSD_CAP_MEMSIZE         1  /* memory size */
-	long val;
-} osd_cap_t;
-
-
-#define OSD_SEND_CMD            _IOW('o', 160, osd_cmd_t)
-#define OSD_GET_CAPABILITY      _IOR('o', 161, osd_cap_t)
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/dvb/version.h b/ANDROID_3.4.5/include/linux/dvb/version.h
deleted file mode 100644
index 0559e2bd..00000000
--- a/ANDROID_3.4.5/include/linux/dvb/version.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * version.h
- *
- * Copyright (C) 2000 Holger Waechtler <holger@convergence.de>
- *                    for convergence integrated media GmbH
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU Lesser General Public License
- * as published by the Free Software Foundation; either version 2.1
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU Lesser General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- *
- */
-
-#ifndef _DVBVERSION_H_
-#define _DVBVERSION_H_
-
-#define DVB_API_VERSION 5
-#define DVB_API_VERSION_MINOR 5
-
-#endif /*_DVBVERSION_H_*/
diff --git a/ANDROID_3.4.5/include/linux/dvb/video.h b/ANDROID_3.4.5/include/linux/dvb/video.h
deleted file mode 100644
index 1d750c0f..00000000
--- a/ANDROID_3.4.5/include/linux/dvb/video.h
+++ /dev/null
@@ -1,276 +0,0 @@
-/*
- * video.h
- *
- * Copyright (C) 2000 Marcus Metzler <marcus@convergence.de>
- *                  & Ralph  Metzler <ralph@convergence.de>
- *                    for convergence integrated media GmbH
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU Lesser General Public License
- * as published by the Free Software Foundation; either version 2.1
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU Lesser General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- *
- */
-
-#ifndef _DVBVIDEO_H_
-#define _DVBVIDEO_H_
-
-#include <linux/types.h>
-#ifdef __KERNEL__
-#include <linux/compiler.h>
-#else
-#include <stdint.h>
-#include <time.h>
-#endif
-
-typedef enum {
-	VIDEO_FORMAT_4_3,     /* Select 4:3 format */
-	VIDEO_FORMAT_16_9,    /* Select 16:9 format. */
-	VIDEO_FORMAT_221_1    /* 2.21:1 */
-} video_format_t;
-
-
-typedef enum {
-	 VIDEO_SYSTEM_PAL,
-	 VIDEO_SYSTEM_NTSC,
-	 VIDEO_SYSTEM_PALN,
-	 VIDEO_SYSTEM_PALNc,
-	 VIDEO_SYSTEM_PALM,
-	 VIDEO_SYSTEM_NTSC60,
-	 VIDEO_SYSTEM_PAL60,
-	 VIDEO_SYSTEM_PALM60
-} video_system_t;
-
-
-typedef enum {
-	VIDEO_PAN_SCAN,       /* use pan and scan format */
-	VIDEO_LETTER_BOX,     /* use letterbox format */
-	VIDEO_CENTER_CUT_OUT  /* use center cut out format */
-} video_displayformat_t;
-
-typedef struct {
-	int w;
-	int h;
-	video_format_t aspect_ratio;
-} video_size_t;
-
-typedef enum {
-	VIDEO_SOURCE_DEMUX, /* Select the demux as the main source */
-	VIDEO_SOURCE_MEMORY /* If this source is selected, the stream
-			       comes from the user through the write
-			       system call */
-} video_stream_source_t;
-
-
-typedef enum {
-	VIDEO_STOPPED, /* Video is stopped */
-	VIDEO_PLAYING, /* Video is currently playing */
-	VIDEO_FREEZED  /* Video is freezed */
-} video_play_state_t;
-
-
-/* Decoder commands */
-#define VIDEO_CMD_PLAY        (0)
-#define VIDEO_CMD_STOP        (1)
-#define VIDEO_CMD_FREEZE      (2)
-#define VIDEO_CMD_CONTINUE    (3)
-
-/* Flags for VIDEO_CMD_FREEZE */
-#define VIDEO_CMD_FREEZE_TO_BLACK     	(1 << 0)
-
-/* Flags for VIDEO_CMD_STOP */
-#define VIDEO_CMD_STOP_TO_BLACK      	(1 << 0)
-#define VIDEO_CMD_STOP_IMMEDIATELY     	(1 << 1)
-
-/* Play input formats: */
-/* The decoder has no special format requirements */
-#define VIDEO_PLAY_FMT_NONE         (0)
-/* The decoder requires full GOPs */
-#define VIDEO_PLAY_FMT_GOP          (1)
-
-/* The structure must be zeroed before use by the application
-   This ensures it can be extended safely in the future. */
-struct video_command {
-	__u32 cmd;
-	__u32 flags;
-	union {
-		struct {
-			__u64 pts;
-		} stop;
-
-		struct {
-			/* 0 or 1000 specifies normal speed,
-			   1 specifies forward single stepping,
-			   -1 specifies backward single stepping,
-			   >1: playback at speed/1000 of the normal speed,
-			   <-1: reverse playback at (-speed/1000) of the normal speed. */
-			__s32 speed;
-			__u32 format;
-		} play;
-
-		struct {
-			__u32 data[16];
-		} raw;
-	};
-};
-
-/* FIELD_UNKNOWN can be used if the hardware does not know whether
-   the Vsync is for an odd, even or progressive (i.e. non-interlaced)
-   field. */
-#define VIDEO_VSYNC_FIELD_UNKNOWN  	(0)
-#define VIDEO_VSYNC_FIELD_ODD 		(1)
-#define VIDEO_VSYNC_FIELD_EVEN		(2)
-#define VIDEO_VSYNC_FIELD_PROGRESSIVE	(3)
-
-struct video_event {
-	__s32 type;
-#define VIDEO_EVENT_SIZE_CHANGED	1
-#define VIDEO_EVENT_FRAME_RATE_CHANGED	2
-#define VIDEO_EVENT_DECODER_STOPPED 	3
-#define VIDEO_EVENT_VSYNC 		4
-	__kernel_time_t timestamp;
-	union {
-		video_size_t size;
-		unsigned int frame_rate;	/* in frames per 1000sec */
-		unsigned char vsync_field;	/* unknown/odd/even/progressive */
-	} u;
-};
-
-
-struct video_status {
-	int                   video_blank;   /* blank video on freeze? */
-	video_play_state_t    play_state;    /* current state of playback */
-	video_stream_source_t stream_source; /* current source (demux/memory) */
-	video_format_t        video_format;  /* current aspect ratio of stream*/
-	video_displayformat_t display_format;/* selected cropping mode */
-};
-
-
-struct video_still_picture {
-	char __user *iFrame;        /* pointer to a single iframe in memory */
-	__s32 size;
-};
-
-
-typedef
-struct video_highlight {
-	int     active;      /*    1=show highlight, 0=hide highlight */
-	__u8    contrast1;   /*    7- 4  Pattern pixel contrast */
-			     /*    3- 0  Background pixel contrast */
-	__u8    contrast2;   /*    7- 4  Emphasis pixel-2 contrast */
-			     /*    3- 0  Emphasis pixel-1 contrast */
-	__u8    color1;      /*    7- 4  Pattern pixel color */
-			     /*    3- 0  Background pixel color */
-	__u8    color2;      /*    7- 4  Emphasis pixel-2 color */
-			     /*    3- 0  Emphasis pixel-1 color */
-	__u32    ypos;       /*   23-22  auto action mode */
-			     /*   21-12  start y */
-			     /*    9- 0  end y */
-	__u32    xpos;       /*   23-22  button color number */
-			     /*   21-12  start x */
-			     /*    9- 0  end x */
-} video_highlight_t;
-
-
-typedef struct video_spu {
-	int active;
-	int stream_id;
-} video_spu_t;
-
-
-typedef struct video_spu_palette {      /* SPU Palette information */
-	int length;
-	__u8 __user *palette;
-} video_spu_palette_t;
-
-
-typedef struct video_navi_pack {
-	int length;          /* 0 ... 1024 */
-	__u8 data[1024];
-} video_navi_pack_t;
-
-
-typedef __u16 video_attributes_t;
-/*   bits: descr. */
-/*   15-14 Video compression mode (0=MPEG-1, 1=MPEG-2) */
-/*   13-12 TV system (0=525/60, 1=625/50) */
-/*   11-10 Aspect ratio (0=4:3, 3=16:9) */
-/*    9- 8 permitted display mode on 4:3 monitor (0=both, 1=only pan-sca */
-/*    7    line 21-1 data present in GOP (1=yes, 0=no) */
-/*    6    line 21-2 data present in GOP (1=yes, 0=no) */
-/*    5- 3 source resolution (0=720x480/576, 1=704x480/576, 2=352x480/57 */
-/*    2    source letterboxed (1=yes, 0=no) */
-/*    0    film/camera mode (0=camera, 1=film (625/50 only)) */
-
-
-/* bit definitions for capabilities: */
-/* can the hardware decode MPEG1 and/or MPEG2? */
-#define VIDEO_CAP_MPEG1   1
-#define VIDEO_CAP_MPEG2   2
-/* can you send a system and/or program stream to video device?
-   (you still have to open the video and the audio device but only
-    send the stream to the video device) */
-#define VIDEO_CAP_SYS     4
-#define VIDEO_CAP_PROG    8
-/* can the driver also handle SPU, NAVI and CSS encoded data?
-   (CSS API is not present yet) */
-#define VIDEO_CAP_SPU    16
-#define VIDEO_CAP_NAVI   32
-#define VIDEO_CAP_CSS    64
-
-
-#define VIDEO_STOP                 _IO('o', 21)
-#define VIDEO_PLAY                 _IO('o', 22)
-#define VIDEO_FREEZE               _IO('o', 23)
-#define VIDEO_CONTINUE             _IO('o', 24)
-#define VIDEO_SELECT_SOURCE        _IO('o', 25)
-#define VIDEO_SET_BLANK            _IO('o', 26)
-#define VIDEO_GET_STATUS           _IOR('o', 27, struct video_status)
-#define VIDEO_GET_EVENT            _IOR('o', 28, struct video_event)
-#define VIDEO_SET_DISPLAY_FORMAT   _IO('o', 29)
-#define VIDEO_STILLPICTURE         _IOW('o', 30, struct video_still_picture)
-#define VIDEO_FAST_FORWARD         _IO('o', 31)
-#define VIDEO_SLOWMOTION           _IO('o', 32)
-#define VIDEO_GET_CAPABILITIES     _IOR('o', 33, unsigned int)
-#define VIDEO_CLEAR_BUFFER         _IO('o',  34)
-#define VIDEO_SET_ID               _IO('o', 35)
-#define VIDEO_SET_STREAMTYPE       _IO('o', 36)
-#define VIDEO_SET_FORMAT           _IO('o', 37)
-#define VIDEO_SET_SYSTEM           _IO('o', 38)
-#define VIDEO_SET_HIGHLIGHT        _IOW('o', 39, video_highlight_t)
-#define VIDEO_SET_SPU              _IOW('o', 50, video_spu_t)
-#define VIDEO_SET_SPU_PALETTE      _IOW('o', 51, video_spu_palette_t)
-#define VIDEO_GET_NAVI             _IOR('o', 52, video_navi_pack_t)
-#define VIDEO_SET_ATTRIBUTES       _IO('o', 53)
-#define VIDEO_GET_SIZE             _IOR('o', 55, video_size_t)
-#define VIDEO_GET_FRAME_RATE       _IOR('o', 56, unsigned int)
-
-/**
- * VIDEO_GET_PTS
- *
- * Read the 33 bit presentation time stamp as defined
- * in ITU T-REC-H.222.0 / ISO/IEC 13818-1.
- *
- * The PTS should belong to the currently played
- * frame if possible, but may also be a value close to it
- * like the PTS of the last decoded frame or the last PTS
- * extracted by the PES parser.
- */
-#define VIDEO_GET_PTS              _IOR('o', 57, __u64)
-
-/* Read the number of displayed frames since the decoder was started */
-#define VIDEO_GET_FRAME_COUNT  	   _IOR('o', 58, __u64)
-
-#define VIDEO_COMMAND     	   _IOWR('o', 59, struct video_command)
-#define VIDEO_TRY_COMMAND 	   _IOWR('o', 60, struct video_command)
-
-#endif /*_DVBVIDEO_H_*/
diff --git a/ANDROID_3.4.5/include/linux/dw_apb_timer.h b/ANDROID_3.4.5/include/linux/dw_apb_timer.h
deleted file mode 100644
index 07261d52..00000000
--- a/ANDROID_3.4.5/include/linux/dw_apb_timer.h
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- * (C) Copyright 2009 Intel Corporation
- * Author: Jacob Pan (jacob.jun.pan@intel.com)
- *
- * Shared with ARM platforms, Jamie Iles, Picochip 2011
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Support for the Synopsys DesignWare APB Timers.
- */
-#ifndef __DW_APB_TIMER_H__
-#define __DW_APB_TIMER_H__
-
-#include <linux/clockchips.h>
-#include <linux/clocksource.h>
-#include <linux/interrupt.h>
-
-#define APBTMRS_REG_SIZE       0x14
-
-struct dw_apb_timer {
-	void __iomem				*base;
-	unsigned long				freq;
-	int					irq;
-};
-
-struct dw_apb_clock_event_device {
-	struct clock_event_device		ced;
-	struct dw_apb_timer			timer;
-	struct irqaction			irqaction;
-	void					(*eoi)(struct dw_apb_timer *);
-};
-
-struct dw_apb_clocksource {
-	struct dw_apb_timer			timer;
-	struct clocksource			cs;
-};
-
-void dw_apb_clockevent_register(struct dw_apb_clock_event_device *dw_ced);
-void dw_apb_clockevent_pause(struct dw_apb_clock_event_device *dw_ced);
-void dw_apb_clockevent_resume(struct dw_apb_clock_event_device *dw_ced);
-void dw_apb_clockevent_stop(struct dw_apb_clock_event_device *dw_ced);
-
-struct dw_apb_clock_event_device *
-dw_apb_clockevent_init(int cpu, const char *name, unsigned rating,
-		       void __iomem *base, int irq, unsigned long freq);
-struct dw_apb_clocksource *
-dw_apb_clocksource_init(unsigned rating, const char *name, void __iomem *base,
-			unsigned long freq);
-void dw_apb_clocksource_register(struct dw_apb_clocksource *dw_cs);
-void dw_apb_clocksource_start(struct dw_apb_clocksource *dw_cs);
-cycle_t dw_apb_clocksource_read(struct dw_apb_clocksource *dw_cs);
-void dw_apb_clocksource_unregister(struct dw_apb_clocksource *dw_cs);
-
-#endif /* __DW_APB_TIMER_H__ */
diff --git a/ANDROID_3.4.5/include/linux/dw_dmac.h b/ANDROID_3.4.5/include/linux/dw_dmac.h
deleted file mode 100644
index 2412e02d..00000000
--- a/ANDROID_3.4.5/include/linux/dw_dmac.h
+++ /dev/null
@@ -1,101 +0,0 @@
-/*
- * Driver for the Synopsys DesignWare DMA Controller (aka DMACA on
- * AVR32 systems.)
- *
- * Copyright (C) 2007 Atmel Corporation
- * Copyright (C) 2010-2011 ST Microelectronics
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef DW_DMAC_H
-#define DW_DMAC_H
-
-#include <linux/dmaengine.h>
-
-/**
- * struct dw_dma_platform_data - Controller configuration parameters
- * @nr_channels: Number of channels supported by hardware (max 8)
- * @is_private: The device channels should be marked as private and not for
- *	by the general purpose DMA channel allocator.
- */
-struct dw_dma_platform_data {
-	unsigned int	nr_channels;
-	bool		is_private;
-#define CHAN_ALLOCATION_ASCENDING	0	/* zero to seven */
-#define CHAN_ALLOCATION_DESCENDING	1	/* seven to zero */
-	unsigned char	chan_allocation_order;
-#define CHAN_PRIORITY_ASCENDING		0	/* chan0 highest */
-#define CHAN_PRIORITY_DESCENDING	1	/* chan7 highest */
-	unsigned char	chan_priority;
-};
-
-/* bursts size */
-enum dw_dma_msize {
-	DW_DMA_MSIZE_1,
-	DW_DMA_MSIZE_4,
-	DW_DMA_MSIZE_8,
-	DW_DMA_MSIZE_16,
-	DW_DMA_MSIZE_32,
-	DW_DMA_MSIZE_64,
-	DW_DMA_MSIZE_128,
-	DW_DMA_MSIZE_256,
-};
-
-/**
- * struct dw_dma_slave - Controller-specific information about a slave
- *
- * @dma_dev: required DMA master device
- * @cfg_hi: Platform-specific initializer for the CFG_HI register
- * @cfg_lo: Platform-specific initializer for the CFG_LO register
- * @src_master: src master for transfers on allocated channel.
- * @dst_master: dest master for transfers on allocated channel.
- */
-struct dw_dma_slave {
-	struct device		*dma_dev;
-	u32			cfg_hi;
-	u32			cfg_lo;
-	u8			src_master;
-	u8			dst_master;
-};
-
-/* Platform-configurable bits in CFG_HI */
-#define DWC_CFGH_FCMODE		(1 << 0)
-#define DWC_CFGH_FIFO_MODE	(1 << 1)
-#define DWC_CFGH_PROTCTL(x)	((x) << 2)
-#define DWC_CFGH_SRC_PER(x)	((x) << 7)
-#define DWC_CFGH_DST_PER(x)	((x) << 11)
-
-/* Platform-configurable bits in CFG_LO */
-#define DWC_CFGL_LOCK_CH_XFER	(0 << 12)	/* scope of LOCK_CH */
-#define DWC_CFGL_LOCK_CH_BLOCK	(1 << 12)
-#define DWC_CFGL_LOCK_CH_XACT	(2 << 12)
-#define DWC_CFGL_LOCK_BUS_XFER	(0 << 14)	/* scope of LOCK_BUS */
-#define DWC_CFGL_LOCK_BUS_BLOCK	(1 << 14)
-#define DWC_CFGL_LOCK_BUS_XACT	(2 << 14)
-#define DWC_CFGL_LOCK_CH	(1 << 15)	/* channel lockout */
-#define DWC_CFGL_LOCK_BUS	(1 << 16)	/* busmaster lockout */
-#define DWC_CFGL_HS_DST_POL	(1 << 18)	/* dst handshake active low */
-#define DWC_CFGL_HS_SRC_POL	(1 << 19)	/* src handshake active low */
-
-/* DMA API extensions */
-struct dw_cyclic_desc {
-	struct dw_desc	**desc;
-	unsigned long	periods;
-	void		(*period_callback)(void *param);
-	void		*period_callback_param;
-};
-
-struct dw_cyclic_desc *dw_dma_cyclic_prep(struct dma_chan *chan,
-		dma_addr_t buf_addr, size_t buf_len, size_t period_len,
-		enum dma_transfer_direction direction);
-void dw_dma_cyclic_free(struct dma_chan *chan);
-int dw_dma_cyclic_start(struct dma_chan *chan);
-void dw_dma_cyclic_stop(struct dma_chan *chan);
-
-dma_addr_t dw_dma_get_src_addr(struct dma_chan *chan);
-
-dma_addr_t dw_dma_get_dst_addr(struct dma_chan *chan);
-
-#endif /* DW_DMAC_H */
diff --git a/ANDROID_3.4.5/include/linux/dynamic_debug.h b/ANDROID_3.4.5/include/linux/dynamic_debug.h
deleted file mode 100644
index 7e3c53a9..00000000
--- a/ANDROID_3.4.5/include/linux/dynamic_debug.h
+++ /dev/null
@@ -1,108 +0,0 @@
-#ifndef _DYNAMIC_DEBUG_H
-#define _DYNAMIC_DEBUG_H
-
-/*
- * An instance of this structure is created in a special
- * ELF section at every dynamic debug callsite.  At runtime,
- * the special section is treated as an array of these.
- */
-struct _ddebug {
-	/*
-	 * These fields are used to drive the user interface
-	 * for selecting and displaying debug callsites.
-	 */
-	const char *modname;
-	const char *function;
-	const char *filename;
-	const char *format;
-	unsigned int lineno:18;
-	/*
- 	 * The flags field controls the behaviour at the callsite.
- 	 * The bits here are changed dynamically when the user
-	 * writes commands to <debugfs>/dynamic_debug/control
-	 */
-#define _DPRINTK_FLAGS_NONE	0
-#define _DPRINTK_FLAGS_PRINT	(1<<0) /* printk() a message using the format */
-#define _DPRINTK_FLAGS_INCL_MODNAME	(1<<1)
-#define _DPRINTK_FLAGS_INCL_FUNCNAME	(1<<2)
-#define _DPRINTK_FLAGS_INCL_LINENO	(1<<3)
-#define _DPRINTK_FLAGS_INCL_TID		(1<<4)
-#if defined DEBUG
-#define _DPRINTK_FLAGS_DEFAULT _DPRINTK_FLAGS_PRINT
-#else
-#define _DPRINTK_FLAGS_DEFAULT 0
-#endif
-	unsigned int flags:8;
-} __attribute__((aligned(8)));
-
-
-int ddebug_add_module(struct _ddebug *tab, unsigned int n,
-				const char *modname);
-
-#if defined(CONFIG_DYNAMIC_DEBUG)
-extern int ddebug_remove_module(const char *mod_name);
-extern __printf(2, 3)
-int __dynamic_pr_debug(struct _ddebug *descriptor, const char *fmt, ...);
-
-struct device;
-
-extern __printf(3, 4)
-int __dynamic_dev_dbg(struct _ddebug *descriptor, const struct device *dev,
-		      const char *fmt, ...);
-
-struct net_device;
-
-extern __printf(3, 4)
-int __dynamic_netdev_dbg(struct _ddebug *descriptor,
-			 const struct net_device *dev,
-			 const char *fmt, ...);
-
-#define DEFINE_DYNAMIC_DEBUG_METADATA(name, fmt)		\
-	static struct _ddebug __used __aligned(8)		\
-	__attribute__((section("__verbose"))) name = {		\
-		.modname = KBUILD_MODNAME,			\
-		.function = __func__,				\
-		.filename = __FILE__,				\
-		.format = (fmt),				\
-		.lineno = __LINE__,				\
-		.flags =  _DPRINTK_FLAGS_DEFAULT,		\
-	}
-
-#define dynamic_pr_debug(fmt, ...)				\
-do {								\
-	DEFINE_DYNAMIC_DEBUG_METADATA(descriptor, fmt);		\
-	if (unlikely(descriptor.flags & _DPRINTK_FLAGS_PRINT))	\
-		__dynamic_pr_debug(&descriptor, pr_fmt(fmt),	\
-				   ##__VA_ARGS__);		\
-} while (0)
-
-#define dynamic_dev_dbg(dev, fmt, ...)				\
-do {								\
-	DEFINE_DYNAMIC_DEBUG_METADATA(descriptor, fmt);		\
-	if (unlikely(descriptor.flags & _DPRINTK_FLAGS_PRINT))	\
-		__dynamic_dev_dbg(&descriptor, dev, fmt,	\
-				  ##__VA_ARGS__);		\
-} while (0)
-
-#define dynamic_netdev_dbg(dev, fmt, ...)			\
-do {								\
-	DEFINE_DYNAMIC_DEBUG_METADATA(descriptor, fmt);		\
-	if (unlikely(descriptor.flags & _DPRINTK_FLAGS_PRINT))	\
-		__dynamic_netdev_dbg(&descriptor, dev, fmt,	\
-				     ##__VA_ARGS__);		\
-} while (0)
-
-#else
-
-static inline int ddebug_remove_module(const char *mod)
-{
-	return 0;
-}
-
-#define dynamic_pr_debug(fmt, ...)					\
-	do { if (0) printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__); } while (0)
-#define dynamic_dev_dbg(dev, fmt, ...)					\
-	do { if (0) dev_printk(KERN_DEBUG, dev, fmt, ##__VA_ARGS__); } while (0)
-#endif
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/dynamic_queue_limits.h b/ANDROID_3.4.5/include/linux/dynamic_queue_limits.h
deleted file mode 100644
index 5621547d..00000000
--- a/ANDROID_3.4.5/include/linux/dynamic_queue_limits.h
+++ /dev/null
@@ -1,97 +0,0 @@
-/*
- * Dynamic queue limits (dql) - Definitions
- *
- * Copyright (c) 2011, Tom Herbert <therbert@google.com>
- *
- * This header file contains the definitions for dynamic queue limits (dql).
- * dql would be used in conjunction with a producer/consumer type queue
- * (possibly a HW queue).  Such a queue would have these general properties:
- *
- *   1) Objects are queued up to some limit specified as number of objects.
- *   2) Periodically a completion process executes which retires consumed
- *      objects.
- *   3) Starvation occurs when limit has been reached, all queued data has
- *      actually been consumed, but completion processing has not yet run
- *      so queuing new data is blocked.
- *   4) Minimizing the amount of queued data is desirable.
- *
- * The goal of dql is to calculate the limit as the minimum number of objects
- * needed to prevent starvation.
- *
- * The primary functions of dql are:
- *    dql_queued - called when objects are enqueued to record number of objects
- *    dql_avail - returns how many objects are available to be queued based
- *      on the object limit and how many objects are already enqueued
- *    dql_completed - called at completion time to indicate how many objects
- *      were retired from the queue
- *
- * The dql implementation does not implement any locking for the dql data
- * structures, the higher layer should provide this.  dql_queued should
- * be serialized to prevent concurrent execution of the function; this
- * is also true for  dql_completed.  However, dql_queued and dlq_completed  can
- * be executed concurrently (i.e. they can be protected by different locks).
- */
-
-#ifndef _LINUX_DQL_H
-#define _LINUX_DQL_H
-
-#ifdef __KERNEL__
-
-struct dql {
-	/* Fields accessed in enqueue path (dql_queued) */
-	unsigned int	num_queued;		/* Total ever queued */
-	unsigned int	adj_limit;		/* limit + num_completed */
-	unsigned int	last_obj_cnt;		/* Count at last queuing */
-
-	/* Fields accessed only by completion path (dql_completed) */
-
-	unsigned int	limit ____cacheline_aligned_in_smp; /* Current limit */
-	unsigned int	num_completed;		/* Total ever completed */
-
-	unsigned int	prev_ovlimit;		/* Previous over limit */
-	unsigned int	prev_num_queued;	/* Previous queue total */
-	unsigned int	prev_last_obj_cnt;	/* Previous queuing cnt */
-
-	unsigned int	lowest_slack;		/* Lowest slack found */
-	unsigned long	slack_start_time;	/* Time slacks seen */
-
-	/* Configuration */
-	unsigned int	max_limit;		/* Max limit */
-	unsigned int	min_limit;		/* Minimum limit */
-	unsigned int	slack_hold_time;	/* Time to measure slack */
-};
-
-/* Set some static maximums */
-#define DQL_MAX_OBJECT (UINT_MAX / 16)
-#define DQL_MAX_LIMIT ((UINT_MAX / 2) - DQL_MAX_OBJECT)
-
-/*
- * Record number of objects queued. Assumes that caller has already checked
- * availability in the queue with dql_avail.
- */
-static inline void dql_queued(struct dql *dql, unsigned int count)
-{
-	BUG_ON(count > DQL_MAX_OBJECT);
-
-	dql->num_queued += count;
-	dql->last_obj_cnt = count;
-}
-
-/* Returns how many objects can be queued, < 0 indicates over limit. */
-static inline int dql_avail(const struct dql *dql)
-{
-	return dql->adj_limit - dql->num_queued;
-}
-
-/* Record number of completed objects and recalculate the limit. */
-void dql_completed(struct dql *dql, unsigned int count);
-
-/* Reset dql state */
-void dql_reset(struct dql *dql);
-
-/* Initialize dql state */
-int dql_init(struct dql *dql, unsigned hold_time);
-
-#endif /* _KERNEL_ */
-
-#endif /* _LINUX_DQL_H */
diff --git a/ANDROID_3.4.5/include/linux/ecryptfs.h b/ANDROID_3.4.5/include/linux/ecryptfs.h
deleted file mode 100644
index 2224a8c0..00000000
--- a/ANDROID_3.4.5/include/linux/ecryptfs.h
+++ /dev/null
@@ -1,113 +0,0 @@
-#ifndef _LINUX_ECRYPTFS_H
-#define _LINUX_ECRYPTFS_H
-
-/* Version verification for shared data structures w/ userspace */
-#define ECRYPTFS_VERSION_MAJOR 0x00
-#define ECRYPTFS_VERSION_MINOR 0x04
-#define ECRYPTFS_SUPPORTED_FILE_VERSION 0x03
-/* These flags indicate which features are supported by the kernel
- * module; userspace tools such as the mount helper read
- * ECRYPTFS_VERSIONING_MASK from a sysfs handle in order to determine
- * how to behave. */
-#define ECRYPTFS_VERSIONING_PASSPHRASE            0x00000001
-#define ECRYPTFS_VERSIONING_PUBKEY                0x00000002
-#define ECRYPTFS_VERSIONING_PLAINTEXT_PASSTHROUGH 0x00000004
-#define ECRYPTFS_VERSIONING_POLICY                0x00000008
-#define ECRYPTFS_VERSIONING_XATTR                 0x00000010
-#define ECRYPTFS_VERSIONING_MULTKEY               0x00000020
-#define ECRYPTFS_VERSIONING_DEVMISC               0x00000040
-#define ECRYPTFS_VERSIONING_HMAC                  0x00000080
-#define ECRYPTFS_VERSIONING_FILENAME_ENCRYPTION   0x00000100
-#define ECRYPTFS_VERSIONING_GCM                   0x00000200
-#define ECRYPTFS_VERSIONING_MASK (ECRYPTFS_VERSIONING_PASSPHRASE \
-				  | ECRYPTFS_VERSIONING_PLAINTEXT_PASSTHROUGH \
-				  | ECRYPTFS_VERSIONING_PUBKEY \
-				  | ECRYPTFS_VERSIONING_XATTR \
-				  | ECRYPTFS_VERSIONING_MULTKEY \
-				  | ECRYPTFS_VERSIONING_DEVMISC \
-				  | ECRYPTFS_VERSIONING_FILENAME_ENCRYPTION)
-#define ECRYPTFS_MAX_PASSWORD_LENGTH 64
-#define ECRYPTFS_MAX_PASSPHRASE_BYTES ECRYPTFS_MAX_PASSWORD_LENGTH
-#define ECRYPTFS_SALT_SIZE 8
-#define ECRYPTFS_SALT_SIZE_HEX (ECRYPTFS_SALT_SIZE*2)
-/* The original signature size is only for what is stored on disk; all
- * in-memory representations are expanded hex, so it better adapted to
- * be passed around or referenced on the command line */
-#define ECRYPTFS_SIG_SIZE 8
-#define ECRYPTFS_SIG_SIZE_HEX (ECRYPTFS_SIG_SIZE*2)
-#define ECRYPTFS_PASSWORD_SIG_SIZE ECRYPTFS_SIG_SIZE_HEX
-#define ECRYPTFS_MAX_KEY_BYTES 64
-#define ECRYPTFS_MAX_ENCRYPTED_KEY_BYTES 512
-#define ECRYPTFS_FILE_VERSION 0x03
-#define ECRYPTFS_MAX_PKI_NAME_BYTES 16
-
-#define RFC2440_CIPHER_DES3_EDE 0x02
-#define RFC2440_CIPHER_CAST_5 0x03
-#define RFC2440_CIPHER_BLOWFISH 0x04
-#define RFC2440_CIPHER_AES_128 0x07
-#define RFC2440_CIPHER_AES_192 0x08
-#define RFC2440_CIPHER_AES_256 0x09
-#define RFC2440_CIPHER_TWOFISH 0x0a
-#define RFC2440_CIPHER_CAST_6 0x0b
-
-#define RFC2440_CIPHER_RSA 0x01
-
-/**
- * For convenience, we may need to pass around the encrypted session
- * key between kernel and userspace because the authentication token
- * may not be extractable.  For example, the TPM may not release the
- * private key, instead requiring the encrypted data and returning the
- * decrypted data.
- */
-struct ecryptfs_session_key {
-#define ECRYPTFS_USERSPACE_SHOULD_TRY_TO_DECRYPT 0x00000001
-#define ECRYPTFS_USERSPACE_SHOULD_TRY_TO_ENCRYPT 0x00000002
-#define ECRYPTFS_CONTAINS_DECRYPTED_KEY 0x00000004
-#define ECRYPTFS_CONTAINS_ENCRYPTED_KEY 0x00000008
-	u32 flags;
-	u32 encrypted_key_size;
-	u32 decrypted_key_size;
-	u8 encrypted_key[ECRYPTFS_MAX_ENCRYPTED_KEY_BYTES];
-	u8 decrypted_key[ECRYPTFS_MAX_KEY_BYTES];
-};
-
-struct ecryptfs_password {
-	u32 password_bytes;
-	s32 hash_algo;
-	u32 hash_iterations;
-	u32 session_key_encryption_key_bytes;
-#define ECRYPTFS_PERSISTENT_PASSWORD 0x01
-#define ECRYPTFS_SESSION_KEY_ENCRYPTION_KEY_SET 0x02
-	u32 flags;
-	/* Iterated-hash concatenation of salt and passphrase */
-	u8 session_key_encryption_key[ECRYPTFS_MAX_KEY_BYTES];
-	u8 signature[ECRYPTFS_PASSWORD_SIG_SIZE + 1];
-	/* Always in expanded hex */
-	u8 salt[ECRYPTFS_SALT_SIZE];
-};
-
-enum ecryptfs_token_types {ECRYPTFS_PASSWORD, ECRYPTFS_PRIVATE_KEY};
-
-struct ecryptfs_private_key {
-	u32 key_size;
-	u32 data_len;
-	u8 signature[ECRYPTFS_PASSWORD_SIG_SIZE + 1];
-	char pki_type[ECRYPTFS_MAX_PKI_NAME_BYTES + 1];
-	u8 data[];
-};
-
-/* May be a password or a private key */
-struct ecryptfs_auth_tok {
-	u16 version; /* 8-bit major and 8-bit minor */
-	u16 token_type;
-#define ECRYPTFS_ENCRYPT_ONLY 0x00000001
-	u32 flags;
-	struct ecryptfs_session_key session_key;
-	u8 reserved[32];
-	union {
-		struct ecryptfs_password password;
-		struct ecryptfs_private_key private_key;
-	} token;
-} __attribute__ ((packed));
-
-#endif /* _LINUX_ECRYPTFS_H */
diff --git a/ANDROID_3.4.5/include/linux/edac.h b/ANDROID_3.4.5/include/linux/edac.h
deleted file mode 100644
index c621d762..00000000
--- a/ANDROID_3.4.5/include/linux/edac.h
+++ /dev/null
@@ -1,476 +0,0 @@
-/*
- * Generic EDAC defs
- *
- * Author: Dave Jiang <djiang@mvista.com>
- *
- * 2006-2008 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- *
- */
-#ifndef _LINUX_EDAC_H_
-#define _LINUX_EDAC_H_
-
-#include <linux/atomic.h>
-#include <linux/kobject.h>
-#include <linux/completion.h>
-#include <linux/workqueue.h>
-
-struct device;
-
-#define EDAC_OPSTATE_INVAL	-1
-#define EDAC_OPSTATE_POLL	0
-#define EDAC_OPSTATE_NMI	1
-#define EDAC_OPSTATE_INT	2
-
-extern int edac_op_state;
-extern int edac_err_assert;
-extern atomic_t edac_handlers;
-extern struct bus_type edac_subsys;
-
-extern int edac_handler_set(void);
-extern void edac_atomic_assert_error(void);
-extern struct bus_type *edac_get_sysfs_subsys(void);
-extern void edac_put_sysfs_subsys(void);
-
-static inline void opstate_init(void)
-{
-	switch (edac_op_state) {
-	case EDAC_OPSTATE_POLL:
-	case EDAC_OPSTATE_NMI:
-		break;
-	default:
-		edac_op_state = EDAC_OPSTATE_POLL;
-	}
-	return;
-}
-
-#define EDAC_MC_LABEL_LEN	31
-#define MC_PROC_NAME_MAX_LEN	7
-
-/* memory devices */
-enum dev_type {
-	DEV_UNKNOWN = 0,
-	DEV_X1,
-	DEV_X2,
-	DEV_X4,
-	DEV_X8,
-	DEV_X16,
-	DEV_X32,		/* Do these parts exist? */
-	DEV_X64			/* Do these parts exist? */
-};
-
-#define DEV_FLAG_UNKNOWN	BIT(DEV_UNKNOWN)
-#define DEV_FLAG_X1		BIT(DEV_X1)
-#define DEV_FLAG_X2		BIT(DEV_X2)
-#define DEV_FLAG_X4		BIT(DEV_X4)
-#define DEV_FLAG_X8		BIT(DEV_X8)
-#define DEV_FLAG_X16		BIT(DEV_X16)
-#define DEV_FLAG_X32		BIT(DEV_X32)
-#define DEV_FLAG_X64		BIT(DEV_X64)
-
-/**
- * enum mem_type - memory types. For a more detailed reference, please see
- *			http://en.wikipedia.org/wiki/DRAM
- *
- * @MEM_EMPTY		Empty csrow
- * @MEM_RESERVED:	Reserved csrow type
- * @MEM_UNKNOWN:	Unknown csrow type
- * @MEM_FPM:		FPM - Fast Page Mode, used on systems up to 1995.
- * @MEM_EDO:		EDO - Extended data out, used on systems up to 1998.
- * @MEM_BEDO:		BEDO - Burst Extended data out, an EDO variant.
- * @MEM_SDR:		SDR - Single data rate SDRAM
- *			http://en.wikipedia.org/wiki/Synchronous_dynamic_random-access_memory
- *			They use 3 pins for chip select: Pins 0 and 2 are
- *			for rank 0; pins 1 and 3 are for rank 1, if the memory
- *			is dual-rank.
- * @MEM_RDR:		Registered SDR SDRAM
- * @MEM_DDR:		Double data rate SDRAM
- *			http://en.wikipedia.org/wiki/DDR_SDRAM
- * @MEM_RDDR:		Registered Double data rate SDRAM
- *			This is a variant of the DDR memories.
- *			A registered memory has a buffer inside it, hiding
- *			part of the memory details to the memory controller.
- * @MEM_RMBS:		Rambus DRAM, used on a few Pentium III/IV controllers.
- * @MEM_DDR2:		DDR2 RAM, as described at JEDEC JESD79-2F.
- *			Those memories are labed as "PC2-" instead of "PC" to
- *			differenciate from DDR.
- * @MEM_FB_DDR2:	Fully-Buffered DDR2, as described at JEDEC Std No. 205
- *			and JESD206.
- *			Those memories are accessed per DIMM slot, and not by
- *			a chip select signal.
- * @MEM_RDDR2:		Registered DDR2 RAM
- *			This is a variant of the DDR2 memories.
- * @MEM_XDR:		Rambus XDR
- *			It is an evolution of the original RAMBUS memories,
- *			created to compete with DDR2. Weren't used on any
- *			x86 arch, but cell_edac PPC memory controller uses it.
- * @MEM_DDR3:		DDR3 RAM
- * @MEM_RDDR3:		Registered DDR3 RAM
- *			This is a variant of the DDR3 memories.
- */
-enum mem_type {
-	MEM_EMPTY = 0,
-	MEM_RESERVED,
-	MEM_UNKNOWN,
-	MEM_FPM,
-	MEM_EDO,
-	MEM_BEDO,
-	MEM_SDR,
-	MEM_RDR,
-	MEM_DDR,
-	MEM_RDDR,
-	MEM_RMBS,
-	MEM_DDR2,
-	MEM_FB_DDR2,
-	MEM_RDDR2,
-	MEM_XDR,
-	MEM_DDR3,
-	MEM_RDDR3,
-};
-
-#define MEM_FLAG_EMPTY		BIT(MEM_EMPTY)
-#define MEM_FLAG_RESERVED	BIT(MEM_RESERVED)
-#define MEM_FLAG_UNKNOWN	BIT(MEM_UNKNOWN)
-#define MEM_FLAG_FPM		BIT(MEM_FPM)
-#define MEM_FLAG_EDO		BIT(MEM_EDO)
-#define MEM_FLAG_BEDO		BIT(MEM_BEDO)
-#define MEM_FLAG_SDR		BIT(MEM_SDR)
-#define MEM_FLAG_RDR		BIT(MEM_RDR)
-#define MEM_FLAG_DDR		BIT(MEM_DDR)
-#define MEM_FLAG_RDDR		BIT(MEM_RDDR)
-#define MEM_FLAG_RMBS		BIT(MEM_RMBS)
-#define MEM_FLAG_DDR2           BIT(MEM_DDR2)
-#define MEM_FLAG_FB_DDR2        BIT(MEM_FB_DDR2)
-#define MEM_FLAG_RDDR2          BIT(MEM_RDDR2)
-#define MEM_FLAG_XDR            BIT(MEM_XDR)
-#define MEM_FLAG_DDR3		 BIT(MEM_DDR3)
-#define MEM_FLAG_RDDR3		 BIT(MEM_RDDR3)
-
-/* chipset Error Detection and Correction capabilities and mode */
-enum edac_type {
-	EDAC_UNKNOWN = 0,	/* Unknown if ECC is available */
-	EDAC_NONE,		/* Doesn't support ECC */
-	EDAC_RESERVED,		/* Reserved ECC type */
-	EDAC_PARITY,		/* Detects parity errors */
-	EDAC_EC,		/* Error Checking - no correction */
-	EDAC_SECDED,		/* Single bit error correction, Double detection */
-	EDAC_S2ECD2ED,		/* Chipkill x2 devices - do these exist? */
-	EDAC_S4ECD4ED,		/* Chipkill x4 devices */
-	EDAC_S8ECD8ED,		/* Chipkill x8 devices */
-	EDAC_S16ECD16ED,	/* Chipkill x16 devices */
-};
-
-#define EDAC_FLAG_UNKNOWN	BIT(EDAC_UNKNOWN)
-#define EDAC_FLAG_NONE		BIT(EDAC_NONE)
-#define EDAC_FLAG_PARITY	BIT(EDAC_PARITY)
-#define EDAC_FLAG_EC		BIT(EDAC_EC)
-#define EDAC_FLAG_SECDED	BIT(EDAC_SECDED)
-#define EDAC_FLAG_S2ECD2ED	BIT(EDAC_S2ECD2ED)
-#define EDAC_FLAG_S4ECD4ED	BIT(EDAC_S4ECD4ED)
-#define EDAC_FLAG_S8ECD8ED	BIT(EDAC_S8ECD8ED)
-#define EDAC_FLAG_S16ECD16ED	BIT(EDAC_S16ECD16ED)
-
-/* scrubbing capabilities */
-enum scrub_type {
-	SCRUB_UNKNOWN = 0,	/* Unknown if scrubber is available */
-	SCRUB_NONE,		/* No scrubber */
-	SCRUB_SW_PROG,		/* SW progressive (sequential) scrubbing */
-	SCRUB_SW_SRC,		/* Software scrub only errors */
-	SCRUB_SW_PROG_SRC,	/* Progressive software scrub from an error */
-	SCRUB_SW_TUNABLE,	/* Software scrub frequency is tunable */
-	SCRUB_HW_PROG,		/* HW progressive (sequential) scrubbing */
-	SCRUB_HW_SRC,		/* Hardware scrub only errors */
-	SCRUB_HW_PROG_SRC,	/* Progressive hardware scrub from an error */
-	SCRUB_HW_TUNABLE	/* Hardware scrub frequency is tunable */
-};
-
-#define SCRUB_FLAG_SW_PROG	BIT(SCRUB_SW_PROG)
-#define SCRUB_FLAG_SW_SRC	BIT(SCRUB_SW_SRC)
-#define SCRUB_FLAG_SW_PROG_SRC	BIT(SCRUB_SW_PROG_SRC)
-#define SCRUB_FLAG_SW_TUN	BIT(SCRUB_SW_SCRUB_TUNABLE)
-#define SCRUB_FLAG_HW_PROG	BIT(SCRUB_HW_PROG)
-#define SCRUB_FLAG_HW_SRC	BIT(SCRUB_HW_SRC)
-#define SCRUB_FLAG_HW_PROG_SRC	BIT(SCRUB_HW_PROG_SRC)
-#define SCRUB_FLAG_HW_TUN	BIT(SCRUB_HW_TUNABLE)
-
-/* FIXME - should have notify capabilities: NMI, LOG, PROC, etc */
-
-/* EDAC internal operation states */
-#define	OP_ALLOC		0x100
-#define OP_RUNNING_POLL		0x201
-#define OP_RUNNING_INTERRUPT	0x202
-#define OP_RUNNING_POLL_INTR	0x203
-#define OP_OFFLINE		0x300
-
-/*
- * Concepts used at the EDAC subsystem
- *
- * There are several things to be aware of that aren't at all obvious:
- *
- * SOCKETS, SOCKET SETS, BANKS, ROWS, CHIP-SELECT ROWS, CHANNELS, etc..
- *
- * These are some of the many terms that are thrown about that don't always
- * mean what people think they mean (Inconceivable!).  In the interest of
- * creating a common ground for discussion, terms and their definitions
- * will be established.
- *
- * Memory devices:	The individual DRAM chips on a memory stick.  These
- *			devices commonly output 4 and 8 bits each (x4, x8).
- *			Grouping several of these in parallel provides the
- *			number of bits that the memory controller expects:
- *			typically 72 bits, in order to provide 64 bits +
- *			8 bits of ECC data.
- *
- * Memory Stick:	A printed circuit board that aggregates multiple
- *			memory devices in parallel.  In general, this is the
- *			Field Replaceable Unit (FRU) which gets replaced, in
- *			the case of excessive errors. Most often it is also
- *			called DIMM (Dual Inline Memory Module).
- *
- * Memory Socket:	A physical connector on the motherboard that accepts
- *			a single memory stick. Also called as "slot" on several
- *			datasheets.
- *
- * Channel:		A memory controller channel, responsible to communicate
- *			with a group of DIMMs. Each channel has its own
- *			independent control (command) and data bus, and can
- *			be used independently or grouped with other channels.
- *
- * Branch:		It is typically the highest hierarchy on a
- *			Fully-Buffered DIMM memory controller.
- *			Typically, it contains two channels.
- *			Two channels at the same branch can be used in single
- *			mode or in lockstep mode.
- *			When lockstep is enabled, the cacheline is doubled,
- *			but it generally brings some performance penalty.
- *			Also, it is generally not possible to point to just one
- *			memory stick when an error occurs, as the error
- *			correction code is calculated using two DIMMs instead
- *			of one. Due to that, it is capable of correcting more
- *			errors than on single mode.
- *
- * Single-channel:	The data accessed by the memory controller is contained
- *			into one dimm only. E. g. if the data is 64 bits-wide,
- *			the data flows to the CPU using one 64 bits parallel
- *			access.
- *			Typically used with SDR, DDR, DDR2 and DDR3 memories.
- *			FB-DIMM and RAMBUS use a different concept for channel,
- *			so this concept doesn't apply there.
- *
- * Double-channel:	The data size accessed by the memory controller is
- *			interlaced into two dimms, accessed at the same time.
- *			E. g. if the DIMM is 64 bits-wide (72 bits with ECC),
- *			the data flows to the CPU using a 128 bits parallel
- *			access.
- *
- * Chip-select row:	This is the name of the DRAM signal used to select the
- *			DRAM ranks to be accessed. Common chip-select rows for
- *			single channel are 64 bits, for dual channel 128 bits.
- *			It may not be visible by the memory controller, as some
- *			DIMM types have a memory buffer that can hide direct
- *			access to it from the Memory Controller.
- *
- * Single-Ranked stick:	A Single-ranked stick has 1 chip-select row of memory.
- *			Motherboards commonly drive two chip-select pins to
- *			a memory stick. A single-ranked stick, will occupy
- *			only one of those rows. The other will be unused.
- *
- * Double-Ranked stick:	A double-ranked stick has two chip-select rows which
- *			access different sets of memory devices.  The two
- *			rows cannot be accessed concurrently.
- *
- * Double-sided stick:	DEPRECATED TERM, see Double-Ranked stick.
- *			A double-sided stick has two chip-select rows which
- *			access different sets of memory devices. The two
- *			rows cannot be accessed concurrently. "Double-sided"
- *			is irrespective of the memory devices being mounted
- *			on both sides of the memory stick.
- *
- * Socket set:		All of the memory sticks that are required for
- *			a single memory access or all of the memory sticks
- *			spanned by a chip-select row.  A single socket set
- *			has two chip-select rows and if double-sided sticks
- *			are used these will occupy those chip-select rows.
- *
- * Bank:		This term is avoided because it is unclear when
- *			needing to distinguish between chip-select rows and
- *			socket sets.
- *
- * Controller pages:
- *
- * Physical pages:
- *
- * Virtual pages:
- *
- *
- * STRUCTURE ORGANIZATION AND CHOICES
- *
- *
- *
- * PS - I enjoyed writing all that about as much as you enjoyed reading it.
- */
-
-/**
- * struct rank_info - contains the information for one DIMM rank
- *
- * @chan_idx:	channel number where the rank is (typically, 0 or 1)
- * @ce_count:	number of correctable errors for this rank
- * @label:	DIMM label. Different ranks for the same DIMM should be
- *		filled, on userspace, with the same label.
- *		FIXME: The core currently won't enforce it.
- * @csrow:	A pointer to the chip select row structure (the parent
- *		structure). The location of the rank is given by
- *		the (csrow->csrow_idx, chan_idx) vector.
- */
-struct rank_info {
-	int chan_idx;
-	u32 ce_count;
-	char label[EDAC_MC_LABEL_LEN + 1];
-	struct csrow_info *csrow;	/* the parent */
-};
-
-struct csrow_info {
-	unsigned long first_page;	/* first page number in dimm */
-	unsigned long last_page;	/* last page number in dimm */
-	unsigned long page_mask;	/* used for interleaving -
-					 * 0UL for non intlv
-					 */
-	u32 nr_pages;		/* number of pages in csrow */
-	u32 grain;		/* granularity of reported error in bytes */
-	int csrow_idx;		/* the chip-select row */
-	enum dev_type dtype;	/* memory device type */
-	u32 ue_count;		/* Uncorrectable Errors for this csrow */
-	u32 ce_count;		/* Correctable Errors for this csrow */
-	enum mem_type mtype;	/* memory csrow type */
-	enum edac_type edac_mode;	/* EDAC mode for this csrow */
-	struct mem_ctl_info *mci;	/* the parent */
-
-	struct kobject kobj;	/* sysfs kobject for this csrow */
-
-	/* channel information for this csrow */
-	u32 nr_channels;
-	struct rank_info *channels;
-};
-
-struct mcidev_sysfs_group {
-	const char *name;				/* group name */
-	const struct mcidev_sysfs_attribute *mcidev_attr; /* group attributes */
-};
-
-struct mcidev_sysfs_group_kobj {
-	struct list_head list;		/* list for all instances within a mc */
-
-	struct kobject kobj;		/* kobj for the group */
-
-	const struct mcidev_sysfs_group *grp;	/* group description table */
-	struct mem_ctl_info *mci;	/* the parent */
-};
-
-/* mcidev_sysfs_attribute structure
- *	used for driver sysfs attributes and in mem_ctl_info
- * 	sysfs top level entries
- */
-struct mcidev_sysfs_attribute {
-	/* It should use either attr or grp */
-	struct attribute attr;
-	const struct mcidev_sysfs_group *grp;	/* Points to a group of attributes */
-
-	/* Ops for show/store values at the attribute - not used on group */
-        ssize_t (*show)(struct mem_ctl_info *,char *);
-        ssize_t (*store)(struct mem_ctl_info *, const char *,size_t);
-};
-
-/* MEMORY controller information structure
- */
-struct mem_ctl_info {
-	struct list_head link;	/* for global list of mem_ctl_info structs */
-
-	struct module *owner;	/* Module owner of this control struct */
-
-	unsigned long mtype_cap;	/* memory types supported by mc */
-	unsigned long edac_ctl_cap;	/* Mem controller EDAC capabilities */
-	unsigned long edac_cap;	/* configuration capabilities - this is
-				 * closely related to edac_ctl_cap.  The
-				 * difference is that the controller may be
-				 * capable of s4ecd4ed which would be listed
-				 * in edac_ctl_cap, but if channels aren't
-				 * capable of s4ecd4ed then the edac_cap would
-				 * not have that capability.
-				 */
-	unsigned long scrub_cap;	/* chipset scrub capabilities */
-	enum scrub_type scrub_mode;	/* current scrub mode */
-
-	/* Translates sdram memory scrub rate given in bytes/sec to the
-	   internal representation and configures whatever else needs
-	   to be configured.
-	 */
-	int (*set_sdram_scrub_rate) (struct mem_ctl_info * mci, u32 bw);
-
-	/* Get the current sdram memory scrub rate from the internal
-	   representation and converts it to the closest matching
-	   bandwidth in bytes/sec.
-	 */
-	int (*get_sdram_scrub_rate) (struct mem_ctl_info * mci);
-
-
-	/* pointer to edac checking routine */
-	void (*edac_check) (struct mem_ctl_info * mci);
-
-	/*
-	 * Remaps memory pages: controller pages to physical pages.
-	 * For most MC's, this will be NULL.
-	 */
-	/* FIXME - why not send the phys page to begin with? */
-	unsigned long (*ctl_page_to_phys) (struct mem_ctl_info * mci,
-					   unsigned long page);
-	int mc_idx;
-	int nr_csrows;
-	struct csrow_info *csrows;
-	/*
-	 * FIXME - what about controllers on other busses? - IDs must be
-	 * unique.  dev pointer should be sufficiently unique, but
-	 * BUS:SLOT.FUNC numbers may not be unique.
-	 */
-	struct device *dev;
-	const char *mod_name;
-	const char *mod_ver;
-	const char *ctl_name;
-	const char *dev_name;
-	char proc_name[MC_PROC_NAME_MAX_LEN + 1];
-	void *pvt_info;
-	u32 ue_noinfo_count;	/* Uncorrectable Errors w/o info */
-	u32 ce_noinfo_count;	/* Correctable Errors w/o info */
-	u32 ue_count;		/* Total Uncorrectable Errors for this MC */
-	u32 ce_count;		/* Total Correctable Errors for this MC */
-	unsigned long start_time;	/* mci load start time (in jiffies) */
-
-	struct completion complete;
-
-	/* edac sysfs device control */
-	struct kobject edac_mci_kobj;
-
-	/* list for all grp instances within a mc */
-	struct list_head grp_kobj_list;
-
-	/* Additional top controller level attributes, but specified
-	 * by the low level driver.
-	 *
-	 * Set by the low level driver to provide attributes at the
-	 * controller level, same level as 'ue_count' and 'ce_count' above.
-	 * An array of structures, NULL terminated
-	 *
-	 * If attributes are desired, then set to array of attributes
-	 * If no attributes are desired, leave NULL
-	 */
-	const struct mcidev_sysfs_attribute *mc_driver_sysfs_attributes;
-
-	/* work struct for this MC */
-	struct delayed_work work;
-
-	/* the internal state of this controller instance */
-	int op_state;
-};
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/edd.h b/ANDROID_3.4.5/include/linux/edd.h
deleted file mode 100644
index 4cbd0fe9..00000000
--- a/ANDROID_3.4.5/include/linux/edd.h
+++ /dev/null
@@ -1,194 +0,0 @@
-/*
- * linux/include/linux/edd.h
- *  Copyright (C) 2002, 2003, 2004 Dell Inc.
- *  by Matt Domsch <Matt_Domsch@dell.com>
- *
- * structures and definitions for the int 13h, ax={41,48}h
- * BIOS Enhanced Disk Drive Services
- * This is based on the T13 group document D1572 Revision 0 (August 14 2002)
- * available at http://www.t13.org/docs2002/d1572r0.pdf.  It is
- * very similar to D1484 Revision 3 http://www.t13.org/docs2002/d1484r3.pdf
- *
- * In a nutshell, arch/{i386,x86_64}/boot/setup.S populates a scratch
- * table in the boot_params that contains a list of BIOS-enumerated
- * boot devices.
- * In arch/{i386,x86_64}/kernel/setup.c, this information is
- * transferred into the edd structure, and in drivers/firmware/edd.c, that
- * information is used to identify BIOS boot disk.  The code in setup.S
- * is very sensitive to the size of these structures.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License v2.0 as published by
- * the Free Software Foundation
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-#ifndef _LINUX_EDD_H
-#define _LINUX_EDD_H
-
-#include <linux/types.h>
-
-#define EDDNR 0x1e9		/* addr of number of edd_info structs at EDDBUF
-				   in boot_params - treat this as 1 byte  */
-#define EDDBUF	0xd00		/* addr of edd_info structs in boot_params */
-#define EDDMAXNR 6		/* number of edd_info structs starting at EDDBUF  */
-#define EDDEXTSIZE 8		/* change these if you muck with the structures */
-#define EDDPARMSIZE 74
-#define CHECKEXTENSIONSPRESENT 0x41
-#define GETDEVICEPARAMETERS 0x48
-#define LEGACYGETDEVICEPARAMETERS 0x08
-#define EDDMAGIC1 0x55AA
-#define EDDMAGIC2 0xAA55
-
-
-#define READ_SECTORS 0x02         /* int13 AH=0x02 is READ_SECTORS command */
-#define EDD_MBR_SIG_OFFSET 0x1B8  /* offset of signature in the MBR */
-#define EDD_MBR_SIG_BUF    0x290  /* addr in boot params */
-#define EDD_MBR_SIG_MAX 16        /* max number of signatures to store */
-#define EDD_MBR_SIG_NR_BUF 0x1ea  /* addr of number of MBR signtaures at EDD_MBR_SIG_BUF
-				     in boot_params - treat this as 1 byte  */
-
-#ifndef __ASSEMBLY__
-
-#define EDD_EXT_FIXED_DISK_ACCESS           (1 << 0)
-#define EDD_EXT_DEVICE_LOCKING_AND_EJECTING (1 << 1)
-#define EDD_EXT_ENHANCED_DISK_DRIVE_SUPPORT (1 << 2)
-#define EDD_EXT_64BIT_EXTENSIONS            (1 << 3)
-
-#define EDD_INFO_DMA_BOUNDARY_ERROR_TRANSPARENT (1 << 0)
-#define EDD_INFO_GEOMETRY_VALID                (1 << 1)
-#define EDD_INFO_REMOVABLE                     (1 << 2)
-#define EDD_INFO_WRITE_VERIFY                  (1 << 3)
-#define EDD_INFO_MEDIA_CHANGE_NOTIFICATION     (1 << 4)
-#define EDD_INFO_LOCKABLE                      (1 << 5)
-#define EDD_INFO_NO_MEDIA_PRESENT              (1 << 6)
-#define EDD_INFO_USE_INT13_FN50                (1 << 7)
-
-struct edd_device_params {
-	__u16 length;
-	__u16 info_flags;
-	__u32 num_default_cylinders;
-	__u32 num_default_heads;
-	__u32 sectors_per_track;
-	__u64 number_of_sectors;
-	__u16 bytes_per_sector;
-	__u32 dpte_ptr;		/* 0xFFFFFFFF for our purposes */
-	__u16 key;		/* = 0xBEDD */
-	__u8 device_path_info_length;	/* = 44 */
-	__u8 reserved2;
-	__u16 reserved3;
-	__u8 host_bus_type[4];
-	__u8 interface_type[8];
-	union {
-		struct {
-			__u16 base_address;
-			__u16 reserved1;
-			__u32 reserved2;
-		} __attribute__ ((packed)) isa;
-		struct {
-			__u8 bus;
-			__u8 slot;
-			__u8 function;
-			__u8 channel;
-			__u32 reserved;
-		} __attribute__ ((packed)) pci;
-		/* pcix is same as pci */
-		struct {
-			__u64 reserved;
-		} __attribute__ ((packed)) ibnd;
-		struct {
-			__u64 reserved;
-		} __attribute__ ((packed)) xprs;
-		struct {
-			__u64 reserved;
-		} __attribute__ ((packed)) htpt;
-		struct {
-			__u64 reserved;
-		} __attribute__ ((packed)) unknown;
-	} interface_path;
-	union {
-		struct {
-			__u8 device;
-			__u8 reserved1;
-			__u16 reserved2;
-			__u32 reserved3;
-			__u64 reserved4;
-		} __attribute__ ((packed)) ata;
-		struct {
-			__u8 device;
-			__u8 lun;
-			__u8 reserved1;
-			__u8 reserved2;
-			__u32 reserved3;
-			__u64 reserved4;
-		} __attribute__ ((packed)) atapi;
-		struct {
-			__u16 id;
-			__u64 lun;
-			__u16 reserved1;
-			__u32 reserved2;
-		} __attribute__ ((packed)) scsi;
-		struct {
-			__u64 serial_number;
-			__u64 reserved;
-		} __attribute__ ((packed)) usb;
-		struct {
-			__u64 eui;
-			__u64 reserved;
-		} __attribute__ ((packed)) i1394;
-		struct {
-			__u64 wwid;
-			__u64 lun;
-		} __attribute__ ((packed)) fibre;
-		struct {
-			__u64 identity_tag;
-			__u64 reserved;
-		} __attribute__ ((packed)) i2o;
-		struct {
-			__u32 array_number;
-			__u32 reserved1;
-			__u64 reserved2;
-		} __attribute__ ((packed)) raid;
-		struct {
-			__u8 device;
-			__u8 reserved1;
-			__u16 reserved2;
-			__u32 reserved3;
-			__u64 reserved4;
-		} __attribute__ ((packed)) sata;
-		struct {
-			__u64 reserved1;
-			__u64 reserved2;
-		} __attribute__ ((packed)) unknown;
-	} device_path;
-	__u8 reserved4;
-	__u8 checksum;
-} __attribute__ ((packed));
-
-struct edd_info {
-	__u8 device;
-	__u8 version;
-	__u16 interface_support;
-	__u16 legacy_max_cylinder;
-	__u8 legacy_max_head;
-	__u8 legacy_sectors_per_track;
-	struct edd_device_params params;
-} __attribute__ ((packed));
-
-struct edd {
-	unsigned int mbr_signature[EDD_MBR_SIG_MAX];
-	struct edd_info edd_info[EDDMAXNR];
-	unsigned char mbr_signature_nr;
-	unsigned char edd_info_nr;
-};
-
-#ifdef __KERNEL__
-extern struct edd edd;
-#endif /* __KERNEL__ */
-#endif				/*!__ASSEMBLY__ */
-
-#endif				/* _LINUX_EDD_H */
diff --git a/ANDROID_3.4.5/include/linux/eeprom_93cx6.h b/ANDROID_3.4.5/include/linux/eeprom_93cx6.h
deleted file mode 100644
index e50f98b0..00000000
--- a/ANDROID_3.4.5/include/linux/eeprom_93cx6.h
+++ /dev/null
@@ -1,82 +0,0 @@
-/*
-	Copyright (C) 2004 - 2006 rt2x00 SourceForge Project
-	<http://rt2x00.serialmonkey.com>
-
-	This program is free software; you can redistribute it and/or modify
-	it under the terms of the GNU General Public License as published by
-	the Free Software Foundation; either version 2 of the License, or
-	(at your option) any later version.
-
-	This program is distributed in the hope that it will be useful,
-	but WITHOUT ANY WARRANTY; without even the implied warranty of
-	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-	GNU General Public License for more details.
-
-	You should have received a copy of the GNU General Public License
-	along with this program; if not, write to the
-	Free Software Foundation, Inc.,
-	59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- */
-
-/*
-	Module: eeprom_93cx6
-	Abstract: EEPROM reader datastructures for 93cx6 chipsets.
-	Supported chipsets: 93c46, 93c56 and 93c66.
- */
-
-/*
- * EEPROM operation defines.
- */
-#define PCI_EEPROM_WIDTH_93C46	6
-#define PCI_EEPROM_WIDTH_93C56	8
-#define PCI_EEPROM_WIDTH_93C66	8
-#define PCI_EEPROM_WIDTH_93C86	8
-#define PCI_EEPROM_WIDTH_OPCODE	3
-#define PCI_EEPROM_WRITE_OPCODE	0x05
-#define PCI_EEPROM_ERASE_OPCODE 0x07
-#define PCI_EEPROM_READ_OPCODE	0x06
-#define PCI_EEPROM_EWDS_OPCODE	0x10
-#define PCI_EEPROM_EWEN_OPCODE	0x13
-
-/**
- * struct eeprom_93cx6 - control structure for setting the commands
- * for reading the eeprom data.
- * @data: private pointer for the driver.
- * @register_read(struct eeprom_93cx6 *eeprom): handler to
- * read the eeprom register, this function should set all reg_* fields.
- * @register_write(struct eeprom_93cx6 *eeprom): handler to
- * write to the eeprom register by using all reg_* fields.
- * @width: eeprom width, should be one of the PCI_EEPROM_WIDTH_* defines
- * @drive_data: Set if we're driving the data line.
- * @reg_data_in: register field to indicate data input
- * @reg_data_out: register field to indicate data output
- * @reg_data_clock: register field to set the data clock
- * @reg_chip_select: register field to set the chip select
- *
- * This structure is used for the communication between the driver
- * and the eeprom_93cx6 handlers for reading the eeprom.
- */
-struct eeprom_93cx6 {
-	void *data;
-
-	void (*register_read)(struct eeprom_93cx6 *eeprom);
-	void (*register_write)(struct eeprom_93cx6 *eeprom);
-
-	int width;
-
-	char drive_data;
-	char reg_data_in;
-	char reg_data_out;
-	char reg_data_clock;
-	char reg_chip_select;
-};
-
-extern void eeprom_93cx6_read(struct eeprom_93cx6 *eeprom,
-	const u8 word, u16 *data);
-extern void eeprom_93cx6_multiread(struct eeprom_93cx6 *eeprom,
-	const u8 word, __le16 *data, const u16 words);
-
-extern void eeprom_93cx6_wren(struct eeprom_93cx6 *eeprom, bool enable);
-
-extern void eeprom_93cx6_write(struct eeprom_93cx6 *eeprom,
-			       u8 addr, u16 data);
diff --git a/ANDROID_3.4.5/include/linux/eeprom_93xx46.h b/ANDROID_3.4.5/include/linux/eeprom_93xx46.h
deleted file mode 100644
index 06791811..00000000
--- a/ANDROID_3.4.5/include/linux/eeprom_93xx46.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- * Module: eeprom_93xx46
- * platform description for 93xx46 EEPROMs.
- */
-
-struct eeprom_93xx46_platform_data {
-	unsigned char	flags;
-#define EE_ADDR8	0x01		/*  8 bit addr. cfg */
-#define EE_ADDR16	0x02		/* 16 bit addr. cfg */
-#define EE_READONLY	0x08		/* forbid writing */
-
-	/*
-	 * optional hooks to control additional logic
-	 * before and after spi transfer.
-	 */
-	void (*prepare)(void *);
-	void (*finish)(void *);
-};
diff --git a/ANDROID_3.4.5/include/linux/efi.h b/ANDROID_3.4.5/include/linux/efi.h
deleted file mode 100644
index ec45ccd8..00000000
--- a/ANDROID_3.4.5/include/linux/efi.h
+++ /dev/null
@@ -1,665 +0,0 @@
-#ifndef _LINUX_EFI_H
-#define _LINUX_EFI_H
-
-/*
- * Extensible Firmware Interface
- * Based on 'Extensible Firmware Interface Specification' version 0.9, April 30, 1999
- *
- * Copyright (C) 1999 VA Linux Systems
- * Copyright (C) 1999 Walt Drummond <drummond@valinux.com>
- * Copyright (C) 1999, 2002-2003 Hewlett-Packard Co.
- *	David Mosberger-Tang <davidm@hpl.hp.com>
- *	Stephane Eranian <eranian@hpl.hp.com>
- */
-#include <linux/init.h>
-#include <linux/string.h>
-#include <linux/time.h>
-#include <linux/types.h>
-#include <linux/proc_fs.h>
-#include <linux/rtc.h>
-#include <linux/ioport.h>
-#include <linux/pfn.h>
-#include <linux/pstore.h>
-
-#include <asm/page.h>
-
-#define EFI_SUCCESS		0
-#define EFI_LOAD_ERROR          ( 1 | (1UL << (BITS_PER_LONG-1)))
-#define EFI_INVALID_PARAMETER	( 2 | (1UL << (BITS_PER_LONG-1)))
-#define EFI_UNSUPPORTED		( 3 | (1UL << (BITS_PER_LONG-1)))
-#define EFI_BAD_BUFFER_SIZE     ( 4 | (1UL << (BITS_PER_LONG-1)))
-#define EFI_BUFFER_TOO_SMALL	( 5 | (1UL << (BITS_PER_LONG-1)))
-#define EFI_NOT_FOUND		(14 | (1UL << (BITS_PER_LONG-1)))
-
-typedef unsigned long efi_status_t;
-typedef u8 efi_bool_t;
-typedef u16 efi_char16_t;		/* UNICODE character */
-
-
-typedef struct {
-	u8 b[16];
-} efi_guid_t;
-
-#define EFI_GUID(a,b,c,d0,d1,d2,d3,d4,d5,d6,d7) \
-((efi_guid_t) \
-{{ (a) & 0xff, ((a) >> 8) & 0xff, ((a) >> 16) & 0xff, ((a) >> 24) & 0xff, \
-  (b) & 0xff, ((b) >> 8) & 0xff, \
-  (c) & 0xff, ((c) >> 8) & 0xff, \
-  (d0), (d1), (d2), (d3), (d4), (d5), (d6), (d7) }})
-
-/*
- * Generic EFI table header
- */
-typedef	struct {
-	u64 signature;
-	u32 revision;
-	u32 headersize;
-	u32 crc32;
-	u32 reserved;
-} efi_table_hdr_t;
-
-/*
- * Memory map descriptor:
- */
-
-/* Memory types: */
-#define EFI_RESERVED_TYPE		 0
-#define EFI_LOADER_CODE			 1
-#define EFI_LOADER_DATA			 2
-#define EFI_BOOT_SERVICES_CODE		 3
-#define EFI_BOOT_SERVICES_DATA		 4
-#define EFI_RUNTIME_SERVICES_CODE	 5
-#define EFI_RUNTIME_SERVICES_DATA	 6
-#define EFI_CONVENTIONAL_MEMORY		 7
-#define EFI_UNUSABLE_MEMORY		 8
-#define EFI_ACPI_RECLAIM_MEMORY		 9
-#define EFI_ACPI_MEMORY_NVS		10
-#define EFI_MEMORY_MAPPED_IO		11
-#define EFI_MEMORY_MAPPED_IO_PORT_SPACE	12
-#define EFI_PAL_CODE			13
-#define EFI_MAX_MEMORY_TYPE		14
-
-/* Attribute values: */
-#define EFI_MEMORY_UC		((u64)0x0000000000000001ULL)	/* uncached */
-#define EFI_MEMORY_WC		((u64)0x0000000000000002ULL)	/* write-coalescing */
-#define EFI_MEMORY_WT		((u64)0x0000000000000004ULL)	/* write-through */
-#define EFI_MEMORY_WB		((u64)0x0000000000000008ULL)	/* write-back */
-#define EFI_MEMORY_WP		((u64)0x0000000000001000ULL)	/* write-protect */
-#define EFI_MEMORY_RP		((u64)0x0000000000002000ULL)	/* read-protect */
-#define EFI_MEMORY_XP		((u64)0x0000000000004000ULL)	/* execute-protect */
-#define EFI_MEMORY_RUNTIME	((u64)0x8000000000000000ULL)	/* range requires runtime mapping */
-#define EFI_MEMORY_DESCRIPTOR_VERSION	1
-
-#define EFI_PAGE_SHIFT		12
-
-typedef struct {
-	u32 type;
-	u32 pad;
-	u64 phys_addr;
-	u64 virt_addr;
-	u64 num_pages;
-	u64 attribute;
-} efi_memory_desc_t;
-
-typedef struct {
-	efi_guid_t guid;
-	u32 headersize;
-	u32 flags;
-	u32 imagesize;
-} efi_capsule_header_t;
-
-/*
- * Allocation types for calls to boottime->allocate_pages.
- */
-#define EFI_ALLOCATE_ANY_PAGES		0
-#define EFI_ALLOCATE_MAX_ADDRESS	1
-#define EFI_ALLOCATE_ADDRESS		2
-#define EFI_MAX_ALLOCATE_TYPE		3
-
-typedef int (*efi_freemem_callback_t) (u64 start, u64 end, void *arg);
-
-/*
- * Types and defines for Time Services
- */
-#define EFI_TIME_ADJUST_DAYLIGHT 0x1
-#define EFI_TIME_IN_DAYLIGHT     0x2
-#define EFI_UNSPECIFIED_TIMEZONE 0x07ff
-
-typedef struct {
-	u16 year;
-	u8 month;
-	u8 day;
-	u8 hour;
-	u8 minute;
-	u8 second;
-	u8 pad1;
-	u32 nanosecond;
-	s16 timezone;
-	u8 daylight;
-	u8 pad2;
-} efi_time_t;
-
-typedef struct {
-	u32 resolution;
-	u32 accuracy;
-	u8 sets_to_zero;
-} efi_time_cap_t;
-
-/*
- * EFI Boot Services table
- */
-typedef struct {
-	efi_table_hdr_t hdr;
-	void *raise_tpl;
-	void *restore_tpl;
-	void *allocate_pages;
-	void *free_pages;
-	void *get_memory_map;
-	void *allocate_pool;
-	void *free_pool;
-	void *create_event;
-	void *set_timer;
-	void *wait_for_event;
-	void *signal_event;
-	void *close_event;
-	void *check_event;
-	void *install_protocol_interface;
-	void *reinstall_protocol_interface;
-	void *uninstall_protocol_interface;
-	void *handle_protocol;
-	void *__reserved;
-	void *register_protocol_notify;
-	void *locate_handle;
-	void *locate_device_path;
-	void *install_configuration_table;
-	void *load_image;
-	void *start_image;
-	void *exit;
-	void *unload_image;
-	void *exit_boot_services;
-	void *get_next_monotonic_count;
-	void *stall;
-	void *set_watchdog_timer;
-	void *connect_controller;
-	void *disconnect_controller;
-	void *open_protocol;
-	void *close_protocol;
-	void *open_protocol_information;
-	void *protocols_per_handle;
-	void *locate_handle_buffer;
-	void *locate_protocol;
-	void *install_multiple_protocol_interfaces;
-	void *uninstall_multiple_protocol_interfaces;
-	void *calculate_crc32;
-	void *copy_mem;
-	void *set_mem;
-	void *create_event_ex;
-} efi_boot_services_t;
-
-/*
- * Types and defines for EFI ResetSystem
- */
-#define EFI_RESET_COLD 0
-#define EFI_RESET_WARM 1
-#define EFI_RESET_SHUTDOWN 2
-
-/*
- * EFI Runtime Services table
- */
-#define EFI_RUNTIME_SERVICES_SIGNATURE ((u64)0x5652453544e5552ULL)
-#define EFI_RUNTIME_SERVICES_REVISION  0x00010000
-
-typedef struct {
-	efi_table_hdr_t hdr;
-	unsigned long get_time;
-	unsigned long set_time;
-	unsigned long get_wakeup_time;
-	unsigned long set_wakeup_time;
-	unsigned long set_virtual_address_map;
-	unsigned long convert_pointer;
-	unsigned long get_variable;
-	unsigned long get_next_variable;
-	unsigned long set_variable;
-	unsigned long get_next_high_mono_count;
-	unsigned long reset_system;
-	unsigned long update_capsule;
-	unsigned long query_capsule_caps;
-	unsigned long query_variable_info;
-} efi_runtime_services_t;
-
-typedef efi_status_t efi_get_time_t (efi_time_t *tm, efi_time_cap_t *tc);
-typedef efi_status_t efi_set_time_t (efi_time_t *tm);
-typedef efi_status_t efi_get_wakeup_time_t (efi_bool_t *enabled, efi_bool_t *pending,
-					    efi_time_t *tm);
-typedef efi_status_t efi_set_wakeup_time_t (efi_bool_t enabled, efi_time_t *tm);
-typedef efi_status_t efi_get_variable_t (efi_char16_t *name, efi_guid_t *vendor, u32 *attr,
-					 unsigned long *data_size, void *data);
-typedef efi_status_t efi_get_next_variable_t (unsigned long *name_size, efi_char16_t *name,
-					      efi_guid_t *vendor);
-typedef efi_status_t efi_set_variable_t (efi_char16_t *name, efi_guid_t *vendor, 
-					 u32 attr, unsigned long data_size,
-					 void *data);
-typedef efi_status_t efi_get_next_high_mono_count_t (u32 *count);
-typedef void efi_reset_system_t (int reset_type, efi_status_t status,
-				 unsigned long data_size, efi_char16_t *data);
-typedef efi_status_t efi_set_virtual_address_map_t (unsigned long memory_map_size,
-						unsigned long descriptor_size,
-						u32 descriptor_version,
-						efi_memory_desc_t *virtual_map);
-typedef efi_status_t efi_query_variable_info_t(u32 attr,
-					       u64 *storage_space,
-					       u64 *remaining_space,
-					       u64 *max_variable_size);
-typedef efi_status_t efi_update_capsule_t(efi_capsule_header_t **capsules,
-					  unsigned long count,
-					  unsigned long sg_list);
-typedef efi_status_t efi_query_capsule_caps_t(efi_capsule_header_t **capsules,
-					      unsigned long count,
-					      u64 *max_size,
-					      int *reset_type);
-
-/*
- *  EFI Configuration Table and GUID definitions
- */
-#define NULL_GUID \
-    EFI_GUID(  0x00000000, 0x0000, 0x0000, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 )
-
-#define MPS_TABLE_GUID    \
-    EFI_GUID(  0xeb9d2d2f, 0x2d88, 0x11d3, 0x9a, 0x16, 0x0, 0x90, 0x27, 0x3f, 0xc1, 0x4d )
-
-#define ACPI_TABLE_GUID    \
-    EFI_GUID(  0xeb9d2d30, 0x2d88, 0x11d3, 0x9a, 0x16, 0x0, 0x90, 0x27, 0x3f, 0xc1, 0x4d )
-
-#define ACPI_20_TABLE_GUID    \
-    EFI_GUID(  0x8868e871, 0xe4f1, 0x11d3, 0xbc, 0x22, 0x0, 0x80, 0xc7, 0x3c, 0x88, 0x81 )
-
-#define SMBIOS_TABLE_GUID    \
-    EFI_GUID(  0xeb9d2d31, 0x2d88, 0x11d3, 0x9a, 0x16, 0x0, 0x90, 0x27, 0x3f, 0xc1, 0x4d )
-
-#define SAL_SYSTEM_TABLE_GUID    \
-    EFI_GUID(  0xeb9d2d32, 0x2d88, 0x11d3, 0x9a, 0x16, 0x0, 0x90, 0x27, 0x3f, 0xc1, 0x4d )
-
-#define HCDP_TABLE_GUID	\
-    EFI_GUID(  0xf951938d, 0x620b, 0x42ef, 0x82, 0x79, 0xa8, 0x4b, 0x79, 0x61, 0x78, 0x98 )
-
-#define UGA_IO_PROTOCOL_GUID \
-    EFI_GUID(  0x61a4d49e, 0x6f68, 0x4f1b, 0xb9, 0x22, 0xa8, 0x6e, 0xed, 0xb, 0x7, 0xa2 )
-
-#define EFI_GLOBAL_VARIABLE_GUID \
-    EFI_GUID(  0x8be4df61, 0x93ca, 0x11d2, 0xaa, 0x0d, 0x00, 0xe0, 0x98, 0x03, 0x2b, 0x8c )
-
-#define UV_SYSTEM_TABLE_GUID \
-    EFI_GUID(  0x3b13a7d4, 0x633e, 0x11dd, 0x93, 0xec, 0xda, 0x25, 0x56, 0xd8, 0x95, 0x93 )
-
-#define LINUX_EFI_CRASH_GUID \
-    EFI_GUID(  0xcfc8fc79, 0xbe2e, 0x4ddc, 0x97, 0xf0, 0x9f, 0x98, 0xbf, 0xe2, 0x98, 0xa0 )
-
-#define LOADED_IMAGE_PROTOCOL_GUID \
-    EFI_GUID(  0x5b1b31a1, 0x9562, 0x11d2, 0x8e, 0x3f, 0x00, 0xa0, 0xc9, 0x69, 0x72, 0x3b )
-
-#define EFI_GRAPHICS_OUTPUT_PROTOCOL_GUID \
-    EFI_GUID(  0x9042a9de, 0x23dc, 0x4a38, 0x96, 0xfb, 0x7a, 0xde, 0xd0, 0x80, 0x51, 0x6a )
-
-#define EFI_UGA_PROTOCOL_GUID \
-    EFI_GUID(  0x982c298b, 0xf4fa, 0x41cb, 0xb8, 0x38, 0x77, 0xaa, 0x68, 0x8f, 0xb8, 0x39 )
-
-#define EFI_PCI_IO_PROTOCOL_GUID \
-    EFI_GUID(  0x4cf5b200, 0x68b8, 0x4ca5, 0x9e, 0xec, 0xb2, 0x3e, 0x3f, 0x50, 0x2, 0x9a )
-
-#define EFI_FILE_INFO_ID \
-    EFI_GUID(  0x9576e92, 0x6d3f, 0x11d2, 0x8e, 0x39, 0x00, 0xa0, 0xc9, 0x69, 0x72, 0x3b )
-
-#define EFI_FILE_SYSTEM_GUID \
-    EFI_GUID(  0x964e5b22, 0x6459, 0x11d2, 0x8e, 0x39, 0x00, 0xa0, 0xc9, 0x69, 0x72, 0x3b )
-
-typedef struct {
-	efi_guid_t guid;
-	u64 table;
-} efi_config_table_64_t;
-
-typedef struct {
-	efi_guid_t guid;
-	u32 table;
-} efi_config_table_32_t;
-
-typedef struct {
-	efi_guid_t guid;
-	unsigned long table;
-} efi_config_table_t;
-
-#define EFI_SYSTEM_TABLE_SIGNATURE ((u64)0x5453595320494249ULL)
-
-#define EFI_2_30_SYSTEM_TABLE_REVISION  ((2 << 16) | (30))
-#define EFI_2_20_SYSTEM_TABLE_REVISION  ((2 << 16) | (20))
-#define EFI_2_10_SYSTEM_TABLE_REVISION  ((2 << 16) | (10))
-#define EFI_2_00_SYSTEM_TABLE_REVISION  ((2 << 16) | (00))
-#define EFI_1_10_SYSTEM_TABLE_REVISION  ((1 << 16) | (10))
-#define EFI_1_02_SYSTEM_TABLE_REVISION  ((1 << 16) | (02))
-
-typedef struct {
-	efi_table_hdr_t hdr;
-	u64 fw_vendor;	/* physical addr of CHAR16 vendor string */
-	u32 fw_revision;
-	u32 __pad1;
-	u64 con_in_handle;
-	u64 con_in;
-	u64 con_out_handle;
-	u64 con_out;
-	u64 stderr_handle;
-	u64 stderr;
-	u64 runtime;
-	u64 boottime;
-	u32 nr_tables;
-	u32 __pad2;
-	u64 tables;
-} efi_system_table_64_t;
-
-typedef struct {
-	efi_table_hdr_t hdr;
-	u32 fw_vendor;	/* physical addr of CHAR16 vendor string */
-	u32 fw_revision;
-	u32 con_in_handle;
-	u32 con_in;
-	u32 con_out_handle;
-	u32 con_out;
-	u32 stderr_handle;
-	u32 stderr;
-	u32 runtime;
-	u32 boottime;
-	u32 nr_tables;
-	u32 tables;
-} efi_system_table_32_t;
-
-typedef struct {
-	efi_table_hdr_t hdr;
-	unsigned long fw_vendor;	/* physical addr of CHAR16 vendor string */
-	u32 fw_revision;
-	unsigned long con_in_handle;
-	unsigned long con_in;
-	unsigned long con_out_handle;
-	unsigned long con_out;
-	unsigned long stderr_handle;
-	unsigned long stderr;
-	efi_runtime_services_t *runtime;
-	efi_boot_services_t *boottime;
-	unsigned long nr_tables;
-	unsigned long tables;
-} efi_system_table_t;
-
-struct efi_memory_map {
-	void *phys_map;
-	void *map;
-	void *map_end;
-	int nr_map;
-	unsigned long desc_version;
-	unsigned long desc_size;
-};
-
-typedef struct {
-	u32 revision;
-	void *parent_handle;
-	efi_system_table_t *system_table;
-	void *device_handle;
-	void *file_path;
-	void *reserved;
-	u32 load_options_size;
-	void *load_options;
-	void *image_base;
-	__aligned_u64 image_size;
-	unsigned int image_code_type;
-	unsigned int image_data_type;
-	unsigned long unload;
-} efi_loaded_image_t;
-
-typedef struct {
-	u64 revision;
-	void *open_volume;
-} efi_file_io_interface_t;
-
-typedef struct {
-	u64 size;
-	u64 file_size;
-	u64 phys_size;
-	efi_time_t create_time;
-	efi_time_t last_access_time;
-	efi_time_t modification_time;
-	__aligned_u64 attribute;
-	efi_char16_t filename[1];
-} efi_file_info_t;
-
-typedef struct {
-	u64 revision;
-	void *open;
-	void *close;
-	void *delete;
-	void *read;
-	void *write;
-	void *get_position;
-	void *set_position;
-	void *get_info;
-	void *set_info;
-	void *flush;
-} efi_file_handle_t;
-
-#define EFI_FILE_MODE_READ	0x0000000000000001
-#define EFI_FILE_MODE_WRITE	0x0000000000000002
-#define EFI_FILE_MODE_CREATE	0x8000000000000000
-
-#define EFI_INVALID_TABLE_ADDR		(~0UL)
-
-/*
- * All runtime access to EFI goes through this structure:
- */
-extern struct efi {
-	efi_system_table_t *systab;	/* EFI system table */
-	unsigned int runtime_version;	/* Runtime services version */
-	unsigned long mps;		/* MPS table */
-	unsigned long acpi;		/* ACPI table  (IA64 ext 0.71) */
-	unsigned long acpi20;		/* ACPI table  (ACPI 2.0) */
-	unsigned long smbios;		/* SM BIOS table */
-	unsigned long sal_systab;	/* SAL system table */
-	unsigned long boot_info;	/* boot info table */
-	unsigned long hcdp;		/* HCDP table */
-	unsigned long uga;		/* UGA table */
-	unsigned long uv_systab;	/* UV system table */
-	efi_get_time_t *get_time;
-	efi_set_time_t *set_time;
-	efi_get_wakeup_time_t *get_wakeup_time;
-	efi_set_wakeup_time_t *set_wakeup_time;
-	efi_get_variable_t *get_variable;
-	efi_get_next_variable_t *get_next_variable;
-	efi_set_variable_t *set_variable;
-	efi_query_variable_info_t *query_variable_info;
-	efi_update_capsule_t *update_capsule;
-	efi_query_capsule_caps_t *query_capsule_caps;
-	efi_get_next_high_mono_count_t *get_next_high_mono_count;
-	efi_reset_system_t *reset_system;
-	efi_set_virtual_address_map_t *set_virtual_address_map;
-} efi;
-
-static inline int
-efi_guidcmp (efi_guid_t left, efi_guid_t right)
-{
-	return memcmp(&left, &right, sizeof (efi_guid_t));
-}
-
-static inline char *
-efi_guid_unparse(efi_guid_t *guid, char *out)
-{
-	sprintf(out, "%pUl", guid->b);
-        return out;
-}
-
-extern void efi_init (void);
-extern void *efi_get_pal_addr (void);
-extern void efi_map_pal_code (void);
-extern void efi_memmap_walk (efi_freemem_callback_t callback, void *arg);
-extern void efi_gettimeofday (struct timespec *ts);
-extern void efi_enter_virtual_mode (void);	/* switch EFI to virtual mode, if possible */
-extern u64 efi_get_iobase (void);
-extern u32 efi_mem_type (unsigned long phys_addr);
-extern u64 efi_mem_attributes (unsigned long phys_addr);
-extern u64 efi_mem_attribute (unsigned long phys_addr, unsigned long size);
-extern int __init efi_uart_console_only (void);
-extern void efi_initialize_iomem_resources(struct resource *code_resource,
-		struct resource *data_resource, struct resource *bss_resource);
-extern unsigned long efi_get_time(void);
-extern int efi_set_rtc_mmss(unsigned long nowtime);
-extern void efi_reserve_boot_services(void);
-extern struct efi_memory_map memmap;
-
-/**
- * efi_range_is_wc - check the WC bit on an address range
- * @start: starting kvirt address
- * @len: length of range
- *
- * Consult the EFI memory map and make sure it's ok to set this range WC.
- * Returns true or false.
- */
-static inline int efi_range_is_wc(unsigned long start, unsigned long len)
-{
-	unsigned long i;
-
-	for (i = 0; i < len; i += (1UL << EFI_PAGE_SHIFT)) {
-		unsigned long paddr = __pa(start + i);
-		if (!(efi_mem_attributes(paddr) & EFI_MEMORY_WC))
-			return 0;
-	}
-	/* The range checked out */
-	return 1;
-}
-
-#ifdef CONFIG_EFI_PCDP
-extern int __init efi_setup_pcdp_console(char *);
-#endif
-
-/*
- * We play games with efi_enabled so that the compiler will, if possible, remove
- * EFI-related code altogether.
- */
-#ifdef CONFIG_EFI
-# ifdef CONFIG_X86
-   extern int efi_enabled;
-   extern bool efi_64bit;
-# else
-#  define efi_enabled 1
-# endif
-#else
-# define efi_enabled 0
-#endif
-
-/*
- * Variable Attributes
- */
-#define EFI_VARIABLE_NON_VOLATILE       0x0000000000000001
-#define EFI_VARIABLE_BOOTSERVICE_ACCESS 0x0000000000000002
-#define EFI_VARIABLE_RUNTIME_ACCESS     0x0000000000000004
-#define EFI_VARIABLE_HARDWARE_ERROR_RECORD 0x0000000000000008
-#define EFI_VARIABLE_AUTHENTICATED_WRITE_ACCESS 0x0000000000000010
-#define EFI_VARIABLE_TIME_BASED_AUTHENTICATED_WRITE_ACCESS 0x0000000000000020
-#define EFI_VARIABLE_APPEND_WRITE	0x0000000000000040
-
-#define EFI_VARIABLE_MASK 	(EFI_VARIABLE_NON_VOLATILE | \
-				EFI_VARIABLE_BOOTSERVICE_ACCESS | \
-				EFI_VARIABLE_RUNTIME_ACCESS | \
-				EFI_VARIABLE_HARDWARE_ERROR_RECORD | \
-				EFI_VARIABLE_AUTHENTICATED_WRITE_ACCESS | \
-				EFI_VARIABLE_TIME_BASED_AUTHENTICATED_WRITE_ACCESS | \
-				EFI_VARIABLE_APPEND_WRITE)
-/*
- * The type of search to perform when calling boottime->locate_handle
- */
-#define EFI_LOCATE_ALL_HANDLES			0
-#define EFI_LOCATE_BY_REGISTER_NOTIFY		1
-#define EFI_LOCATE_BY_PROTOCOL			2
-
-/*
- * EFI Device Path information
- */
-#define EFI_DEV_HW			0x01
-#define  EFI_DEV_PCI				 1
-#define  EFI_DEV_PCCARD				 2
-#define  EFI_DEV_MEM_MAPPED			 3
-#define  EFI_DEV_VENDOR				 4
-#define  EFI_DEV_CONTROLLER			 5
-#define EFI_DEV_ACPI			0x02
-#define   EFI_DEV_BASIC_ACPI			 1
-#define   EFI_DEV_EXPANDED_ACPI			 2
-#define EFI_DEV_MSG			0x03
-#define   EFI_DEV_MSG_ATAPI			 1
-#define   EFI_DEV_MSG_SCSI			 2
-#define   EFI_DEV_MSG_FC			 3
-#define   EFI_DEV_MSG_1394			 4
-#define   EFI_DEV_MSG_USB			 5
-#define   EFI_DEV_MSG_USB_CLASS			15
-#define   EFI_DEV_MSG_I20			 6
-#define   EFI_DEV_MSG_MAC			11
-#define   EFI_DEV_MSG_IPV4			12
-#define   EFI_DEV_MSG_IPV6			13
-#define   EFI_DEV_MSG_INFINIBAND		 9
-#define   EFI_DEV_MSG_UART			14
-#define   EFI_DEV_MSG_VENDOR			10
-#define EFI_DEV_MEDIA			0x04
-#define   EFI_DEV_MEDIA_HARD_DRIVE		 1
-#define   EFI_DEV_MEDIA_CDROM			 2
-#define   EFI_DEV_MEDIA_VENDOR			 3
-#define   EFI_DEV_MEDIA_FILE			 4
-#define   EFI_DEV_MEDIA_PROTOCOL		 5
-#define EFI_DEV_BIOS_BOOT		0x05
-#define EFI_DEV_END_PATH		0x7F
-#define EFI_DEV_END_PATH2		0xFF
-#define   EFI_DEV_END_INSTANCE			0x01
-#define   EFI_DEV_END_ENTIRE			0xFF
-
-struct efi_generic_dev_path {
-	u8 type;
-	u8 sub_type;
-	u16 length;
-} __attribute ((packed));
-
-static inline void memrange_efi_to_native(u64 *addr, u64 *npages)
-{
-	*npages = PFN_UP(*addr + (*npages<<EFI_PAGE_SHIFT)) - PFN_DOWN(*addr);
-	*addr &= PAGE_MASK;
-}
-
-#if defined(CONFIG_EFI_VARS) || defined(CONFIG_EFI_VARS_MODULE)
-/*
- * EFI Variable support.
- *
- * Different firmware drivers can expose their EFI-like variables using
- * the following.
- */
-
-struct efivar_operations {
-	efi_get_variable_t *get_variable;
-	efi_get_next_variable_t *get_next_variable;
-	efi_set_variable_t *set_variable;
-};
-
-struct efivars {
-	/*
-	 * ->lock protects two things:
-	 * 1) ->list - adds, removals, reads, writes
-	 * 2) ops.[gs]et_variable() calls.
-	 * It must not be held when creating sysfs entries or calling kmalloc.
-	 * ops.get_next_variable() is only called from register_efivars(),
-	 * which is protected by the BKL, so that path is safe.
-	 */
-	spinlock_t lock;
-	struct list_head list;
-	struct kset *kset;
-	struct bin_attribute *new_var, *del_var;
-	const struct efivar_operations *ops;
-	struct efivar_entry *walk_entry;
-	struct pstore_info efi_pstore_info;
-};
-
-int register_efivars(struct efivars *efivars,
-		     const struct efivar_operations *ops,
-		     struct kobject *parent_kobj);
-void unregister_efivars(struct efivars *efivars);
-
-#endif /* CONFIG_EFI_VARS */
-
-#endif /* _LINUX_EFI_H */
diff --git a/ANDROID_3.4.5/include/linux/efs_fs_sb.h b/ANDROID_3.4.5/include/linux/efs_fs_sb.h
deleted file mode 100644
index a01be90c..00000000
--- a/ANDROID_3.4.5/include/linux/efs_fs_sb.h
+++ /dev/null
@@ -1,62 +0,0 @@
-/*
- * efs_fs_sb.h
- *
- * Copyright (c) 1999 Al Smith
- *
- * Portions derived from IRIX header files (c) 1988 Silicon Graphics
- */
-
-#ifndef __EFS_FS_SB_H__
-#define __EFS_FS_SB_H__
-
-#include <linux/types.h>
-#include <linux/magic.h>
-
-/* EFS superblock magic numbers */
-#define EFS_MAGIC	0x072959
-#define EFS_NEWMAGIC	0x07295a
-
-#define IS_EFS_MAGIC(x)	((x == EFS_MAGIC) || (x == EFS_NEWMAGIC))
-
-#define EFS_SUPER		1
-#define EFS_ROOTINODE		2
-
-/* efs superblock on disk */
-struct efs_super {
-	__be32		fs_size;        /* size of filesystem, in sectors */
-	__be32		fs_firstcg;     /* bb offset to first cg */
-	__be32		fs_cgfsize;     /* size of cylinder group in bb's */
-	__be16		fs_cgisize;     /* bb's of inodes per cylinder group */
-	__be16		fs_sectors;     /* sectors per track */
-	__be16		fs_heads;       /* heads per cylinder */
-	__be16		fs_ncg;         /* # of cylinder groups in filesystem */
-	__be16		fs_dirty;       /* fs needs to be fsck'd */
-	__be32		fs_time;        /* last super-block update */
-	__be32		fs_magic;       /* magic number */
-	char		fs_fname[6];    /* file system name */
-	char		fs_fpack[6];    /* file system pack name */
-	__be32		fs_bmsize;      /* size of bitmap in bytes */
-	__be32		fs_tfree;       /* total free data blocks */
-	__be32		fs_tinode;      /* total free inodes */
-	__be32		fs_bmblock;     /* bitmap location. */
-	__be32		fs_replsb;      /* Location of replicated superblock. */
-	__be32		fs_lastialloc;  /* last allocated inode */
-	char		fs_spare[20];   /* space for expansion - MUST BE ZERO */
-	__be32		fs_checksum;    /* checksum of volume portion of fs */
-};
-
-/* efs superblock information in memory */
-struct efs_sb_info {
-	__u32	fs_magic;	/* superblock magic number */
-	__u32	fs_start;	/* first block of filesystem */
-	__u32	first_block;	/* first data block in filesystem */
-	__u32	total_blocks;	/* total number of blocks in filesystem */
-	__u32	group_size;	/* # of blocks a group consists of */ 
-	__u32	data_free;	/* # of free data blocks */
-	__u32	inode_free;	/* # of free inodes */
-	__u16	inode_blocks;	/* # of blocks used for inodes in every grp */
-	__u16	total_groups;	/* # of groups */
-};
-
-#endif /* __EFS_FS_SB_H__ */
-
diff --git a/ANDROID_3.4.5/include/linux/efs_vh.h b/ANDROID_3.4.5/include/linux/efs_vh.h
deleted file mode 100644
index 8a11150c..00000000
--- a/ANDROID_3.4.5/include/linux/efs_vh.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- * efs_vh.h
- *
- * Copyright (c) 1999 Al Smith
- *
- * Portions derived from IRIX header files (c) 1985 MIPS Computer Systems, Inc.
- */
-
-#ifndef __EFS_VH_H__
-#define __EFS_VH_H__
-
-#define VHMAGIC		0xbe5a941	/* volume header magic number */
-#define NPARTAB		16		/* 16 unix partitions */
-#define NVDIR		15		/* max of 15 directory entries */
-#define BFNAMESIZE	16		/* max 16 chars in boot file name */
-#define VDNAMESIZE	8
-
-struct volume_directory {
-	char	vd_name[VDNAMESIZE];	/* name */
-	__be32	vd_lbn;			/* logical block number */
-	__be32	vd_nbytes;		/* file length in bytes */
-};
-
-struct partition_table {	/* one per logical partition */
-	__be32	pt_nblks;	/* # of logical blks in partition */
-	__be32	pt_firstlbn;	/* first lbn of partition */
-	__be32	pt_type;	/* use of partition */
-};
-
-struct volume_header {
-	__be32	vh_magic;			/* identifies volume header */
-	__be16	vh_rootpt;			/* root partition number */
-	__be16	vh_swappt;			/* swap partition number */
-	char	vh_bootfile[BFNAMESIZE];	/* name of file to boot */
-	char	pad[48];			/* device param space */
-	struct volume_directory vh_vd[NVDIR];	/* other vol hdr contents */
-	struct partition_table  vh_pt[NPARTAB];	/* device partition layout */
-	__be32	vh_csum;			/* volume header checksum */
-	__be32	vh_fill;			/* fill out to 512 bytes */
-};
-
-/* partition type sysv is used for EFS format CD-ROM partitions */
-#define SGI_SYSV	0x05
-#define SGI_EFS		0x07
-#define IS_EFS(x)	(((x) == SGI_EFS) || ((x) == SGI_SYSV))
-
-struct pt_types {
-	int	pt_type;
-	char	*pt_name;
-};
-
-#endif /* __EFS_VH_H__ */
-
diff --git a/ANDROID_3.4.5/include/linux/eisa.h b/ANDROID_3.4.5/include/linux/eisa.h
deleted file mode 100644
index 6925249a..00000000
--- a/ANDROID_3.4.5/include/linux/eisa.h
+++ /dev/null
@@ -1,111 +0,0 @@
-#ifndef _LINUX_EISA_H
-#define _LINUX_EISA_H
-
-#include <linux/ioport.h>
-#include <linux/device.h>
-#include <linux/mod_devicetable.h>
-
-#define EISA_MAX_SLOTS 8
-
-#define EISA_MAX_RESOURCES 4
-
-/* A few EISA constants/offsets... */
-
-#define EISA_DMA1_STATUS            8
-#define EISA_INT1_CTRL           0x20
-#define EISA_INT1_MASK           0x21
-#define EISA_INT2_CTRL           0xA0
-#define EISA_INT2_MASK           0xA1
-#define EISA_DMA2_STATUS         0xD0
-#define EISA_DMA2_WRITE_SINGLE   0xD4
-#define EISA_EXT_NMI_RESET_CTRL 0x461
-#define EISA_INT1_EDGE_LEVEL    0x4D0
-#define EISA_INT2_EDGE_LEVEL    0x4D1
-#define EISA_VENDOR_ID_OFFSET   0xC80
-#define EISA_CONFIG_OFFSET      0xC84
-
-#define EISA_CONFIG_ENABLED         1
-#define EISA_CONFIG_FORCED          2
-
-/* There is not much we can say about an EISA device, apart from
- * signature, slot number, and base address. dma_mask is set by
- * default to parent device mask..*/
-
-struct eisa_device {
-	struct eisa_device_id id;
-	int                   slot;
-	int                   state;
-	unsigned long         base_addr;
-	struct resource       res[EISA_MAX_RESOURCES];
-	u64                   dma_mask;
-	struct device         dev; /* generic device */
-#ifdef CONFIG_EISA_NAMES
-	char		      pretty_name[50];
-#endif
-};
-
-#define to_eisa_device(n) container_of(n, struct eisa_device, dev)
-
-static inline int eisa_get_region_index (void *addr)
-{
-	unsigned long x = (unsigned long) addr;
-
-	x &= 0xc00;
-	return (x >> 12);
-}
-
-struct eisa_driver {
-	const struct eisa_device_id *id_table;
-	struct device_driver         driver;
-};
-
-#define to_eisa_driver(drv) container_of(drv,struct eisa_driver, driver)
-
-/* These external functions are only available when EISA support is enabled. */
-#ifdef CONFIG_EISA
-
-extern struct bus_type eisa_bus_type;
-int eisa_driver_register (struct eisa_driver *edrv);
-void eisa_driver_unregister (struct eisa_driver *edrv);
-
-#else /* !CONFIG_EISA */
-
-static inline int eisa_driver_register (struct eisa_driver *edrv) { return 0; }
-static inline void eisa_driver_unregister (struct eisa_driver *edrv) { }
-
-#endif /* !CONFIG_EISA */
-
-/* Mimics pci.h... */
-static inline void *eisa_get_drvdata (struct eisa_device *edev)
-{
-        return dev_get_drvdata(&edev->dev);
-}
-
-static inline void eisa_set_drvdata (struct eisa_device *edev, void *data)
-{
-        dev_set_drvdata(&edev->dev, data);
-}
-
-/* The EISA root device. There's rumours about machines with multiple
- * busses (PA-RISC ?), so we try to handle that. */
-
-struct eisa_root_device {
-	struct device   *dev;	 /* Pointer to bridge device */
-	struct resource *res;
-	unsigned long    bus_base_addr;
-	int		 slots;  /* Max slot number */
-	int		 force_probe; /* Probe even when no slot 0 */
-	u64		 dma_mask; /* from bridge device */
-	int              bus_nr; /* Set by eisa_root_register */
-	struct resource  eisa_root_res;	/* ditto */
-};
-
-int eisa_root_register (struct eisa_root_device *root);
-
-#ifdef CONFIG_EISA
-extern int EISA_bus;
-#else
-# define EISA_bus 0
-#endif
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/elevator.h b/ANDROID_3.4.5/include/linux/elevator.h
deleted file mode 100644
index 7d4e0356..00000000
--- a/ANDROID_3.4.5/include/linux/elevator.h
+++ /dev/null
@@ -1,208 +0,0 @@
-#ifndef _LINUX_ELEVATOR_H
-#define _LINUX_ELEVATOR_H
-
-#include <linux/percpu.h>
-
-#ifdef CONFIG_BLOCK
-
-struct io_cq;
-
-typedef int (elevator_merge_fn) (struct request_queue *, struct request **,
-				 struct bio *);
-
-typedef void (elevator_merge_req_fn) (struct request_queue *, struct request *, struct request *);
-
-typedef void (elevator_merged_fn) (struct request_queue *, struct request *, int);
-
-typedef int (elevator_allow_merge_fn) (struct request_queue *, struct request *, struct bio *);
-
-typedef void (elevator_bio_merged_fn) (struct request_queue *,
-						struct request *, struct bio *);
-
-typedef int (elevator_dispatch_fn) (struct request_queue *, int);
-
-typedef void (elevator_add_req_fn) (struct request_queue *, struct request *);
-typedef struct request *(elevator_request_list_fn) (struct request_queue *, struct request *);
-typedef void (elevator_completed_req_fn) (struct request_queue *, struct request *);
-typedef int (elevator_may_queue_fn) (struct request_queue *, int);
-
-typedef void (elevator_init_icq_fn) (struct io_cq *);
-typedef void (elevator_exit_icq_fn) (struct io_cq *);
-typedef int (elevator_set_req_fn) (struct request_queue *, struct request *, gfp_t);
-typedef void (elevator_put_req_fn) (struct request *);
-typedef void (elevator_activate_req_fn) (struct request_queue *, struct request *);
-typedef void (elevator_deactivate_req_fn) (struct request_queue *, struct request *);
-
-typedef void *(elevator_init_fn) (struct request_queue *);
-typedef void (elevator_exit_fn) (struct elevator_queue *);
-
-struct elevator_ops
-{
-	elevator_merge_fn *elevator_merge_fn;
-	elevator_merged_fn *elevator_merged_fn;
-	elevator_merge_req_fn *elevator_merge_req_fn;
-	elevator_allow_merge_fn *elevator_allow_merge_fn;
-	elevator_bio_merged_fn *elevator_bio_merged_fn;
-
-	elevator_dispatch_fn *elevator_dispatch_fn;
-	elevator_add_req_fn *elevator_add_req_fn;
-	elevator_activate_req_fn *elevator_activate_req_fn;
-	elevator_deactivate_req_fn *elevator_deactivate_req_fn;
-
-	elevator_completed_req_fn *elevator_completed_req_fn;
-
-	elevator_request_list_fn *elevator_former_req_fn;
-	elevator_request_list_fn *elevator_latter_req_fn;
-
-	elevator_init_icq_fn *elevator_init_icq_fn;	/* see iocontext.h */
-	elevator_exit_icq_fn *elevator_exit_icq_fn;	/* ditto */
-
-	elevator_set_req_fn *elevator_set_req_fn;
-	elevator_put_req_fn *elevator_put_req_fn;
-
-	elevator_may_queue_fn *elevator_may_queue_fn;
-
-	elevator_init_fn *elevator_init_fn;
-	elevator_exit_fn *elevator_exit_fn;
-};
-
-#define ELV_NAME_MAX	(16)
-
-struct elv_fs_entry {
-	struct attribute attr;
-	ssize_t (*show)(struct elevator_queue *, char *);
-	ssize_t (*store)(struct elevator_queue *, const char *, size_t);
-};
-
-/*
- * identifies an elevator type, such as AS or deadline
- */
-struct elevator_type
-{
-	/* managed by elevator core */
-	struct kmem_cache *icq_cache;
-
-	/* fields provided by elevator implementation */
-	struct elevator_ops ops;
-	size_t icq_size;	/* see iocontext.h */
-	size_t icq_align;	/* ditto */
-	struct elv_fs_entry *elevator_attrs;
-	char elevator_name[ELV_NAME_MAX];
-	struct module *elevator_owner;
-
-	/* managed by elevator core */
-	char icq_cache_name[ELV_NAME_MAX + 5];	/* elvname + "_io_cq" */
-	struct list_head list;
-};
-
-/*
- * each queue has an elevator_queue associated with it
- */
-struct elevator_queue
-{
-	struct elevator_type *type;
-	void *elevator_data;
-	struct kobject kobj;
-	struct mutex sysfs_lock;
-	struct hlist_head *hash;
-	unsigned int registered:1;
-};
-
-/*
- * block elevator interface
- */
-extern void elv_dispatch_sort(struct request_queue *, struct request *);
-extern void elv_dispatch_add_tail(struct request_queue *, struct request *);
-extern void elv_add_request(struct request_queue *, struct request *, int);
-extern void __elv_add_request(struct request_queue *, struct request *, int);
-extern int elv_merge(struct request_queue *, struct request **, struct bio *);
-extern void elv_merge_requests(struct request_queue *, struct request *,
-			       struct request *);
-extern void elv_merged_request(struct request_queue *, struct request *, int);
-extern void elv_bio_merged(struct request_queue *q, struct request *,
-				struct bio *);
-extern void elv_requeue_request(struct request_queue *, struct request *);
-extern struct request *elv_former_request(struct request_queue *, struct request *);
-extern struct request *elv_latter_request(struct request_queue *, struct request *);
-extern int elv_register_queue(struct request_queue *q);
-extern void elv_unregister_queue(struct request_queue *q);
-extern int elv_may_queue(struct request_queue *, int);
-extern void elv_abort_queue(struct request_queue *);
-extern void elv_completed_request(struct request_queue *, struct request *);
-extern int elv_set_request(struct request_queue *, struct request *, gfp_t);
-extern void elv_put_request(struct request_queue *, struct request *);
-extern void elv_drain_elevator(struct request_queue *);
-
-/*
- * io scheduler registration
- */
-extern int elv_register(struct elevator_type *);
-extern void elv_unregister(struct elevator_type *);
-
-/*
- * io scheduler sysfs switching
- */
-extern ssize_t elv_iosched_show(struct request_queue *, char *);
-extern ssize_t elv_iosched_store(struct request_queue *, const char *, size_t);
-
-extern int elevator_init(struct request_queue *, char *);
-extern void elevator_exit(struct elevator_queue *);
-extern int elevator_change(struct request_queue *, const char *);
-extern bool elv_rq_merge_ok(struct request *, struct bio *);
-
-/*
- * Helper functions.
- */
-extern struct request *elv_rb_former_request(struct request_queue *, struct request *);
-extern struct request *elv_rb_latter_request(struct request_queue *, struct request *);
-
-/*
- * rb support functions.
- */
-extern void elv_rb_add(struct rb_root *, struct request *);
-extern void elv_rb_del(struct rb_root *, struct request *);
-extern struct request *elv_rb_find(struct rb_root *, sector_t);
-
-/*
- * Return values from elevator merger
- */
-#define ELEVATOR_NO_MERGE	0
-#define ELEVATOR_FRONT_MERGE	1
-#define ELEVATOR_BACK_MERGE	2
-
-/*
- * Insertion selection
- */
-#define ELEVATOR_INSERT_FRONT	1
-#define ELEVATOR_INSERT_BACK	2
-#define ELEVATOR_INSERT_SORT	3
-#define ELEVATOR_INSERT_REQUEUE	4
-#define ELEVATOR_INSERT_FLUSH	5
-#define ELEVATOR_INSERT_SORT_MERGE	6
-
-/*
- * return values from elevator_may_queue_fn
- */
-enum {
-	ELV_MQUEUE_MAY,
-	ELV_MQUEUE_NO,
-	ELV_MQUEUE_MUST,
-};
-
-#define rq_end_sector(rq)	(blk_rq_pos(rq) + blk_rq_sectors(rq))
-#define rb_entry_rq(node)	rb_entry((node), struct request, rb_node)
-
-/*
- * Hack to reuse the csd.list list_head as the fifo time holder while
- * the request is in the io scheduler. Saves an unsigned long in rq.
- */
-#define rq_fifo_time(rq)	((unsigned long) (rq)->csd.list.next)
-#define rq_set_fifo_time(rq,exp)	((rq)->csd.list.next = (void *) (exp))
-#define rq_entry_fifo(ptr)	list_entry((ptr), struct request, queuelist)
-#define rq_fifo_clear(rq)	do {		\
-	list_del_init(&(rq)->queuelist);	\
-	INIT_LIST_HEAD(&(rq)->csd.list);	\
-	} while (0)
-
-#endif /* CONFIG_BLOCK */
-#endif
diff --git a/ANDROID_3.4.5/include/linux/elf-em.h b/ANDROID_3.4.5/include/linux/elf-em.h
deleted file mode 100644
index 8e2b7bac..00000000
--- a/ANDROID_3.4.5/include/linux/elf-em.h
+++ /dev/null
@@ -1,56 +0,0 @@
-#ifndef _LINUX_ELF_EM_H
-#define _LINUX_ELF_EM_H
-
-/* These constants define the various ELF target machines */
-#define EM_NONE		0
-#define EM_M32		1
-#define EM_SPARC	2
-#define EM_386		3
-#define EM_68K		4
-#define EM_88K		5
-#define EM_486		6	/* Perhaps disused */
-#define EM_860		7
-#define EM_MIPS		8	/* MIPS R3000 (officially, big-endian only) */
-				/* Next two are historical and binaries and
-				   modules of these types will be rejected by
-				   Linux.  */
-#define EM_MIPS_RS3_LE	10	/* MIPS R3000 little-endian */
-#define EM_MIPS_RS4_BE	10	/* MIPS R4000 big-endian */
-
-#define EM_PARISC	15	/* HPPA */
-#define EM_SPARC32PLUS	18	/* Sun's "v8plus" */
-#define EM_PPC		20	/* PowerPC */
-#define EM_PPC64	21	 /* PowerPC64 */
-#define EM_SPU		23	/* Cell BE SPU */
-#define EM_SH		42	/* SuperH */
-#define EM_SPARCV9	43	/* SPARC v9 64-bit */
-#define EM_IA_64	50	/* HP/Intel IA-64 */
-#define EM_X86_64	62	/* AMD x86-64 */
-#define EM_S390		22	/* IBM S/390 */
-#define EM_CRIS		76	/* Axis Communications 32-bit embedded processor */
-#define EM_V850		87	/* NEC v850 */
-#define EM_M32R		88	/* Renesas M32R */
-#define EM_H8_300	46	/* Renesas H8/300,300H,H8S */
-#define EM_MN10300	89	/* Panasonic/MEI MN10300, AM33 */
-#define EM_BLACKFIN     106     /* ADI Blackfin Processor */
-#define EM_TI_C6000	140	/* TI C6X DSPs */
-#define EM_FRV		0x5441	/* Fujitsu FR-V */
-#define EM_AVR32	0x18ad	/* Atmel AVR32 */
-
-/*
- * This is an interim value that we will use until the committee comes
- * up with a final number.
- */
-#define EM_ALPHA	0x9026
-
-/* Bogus old v850 magic number, used by old tools. */
-#define EM_CYGNUS_V850	0x9080
-/* Bogus old m32r magic number, used by old tools. */
-#define EM_CYGNUS_M32R	0x9041
-/* This is the old interim value for S/390 architecture */
-#define EM_S390_OLD	0xA390
-/* Also Panasonic/MEI MN10300, AM33 */
-#define EM_CYGNUS_MN10300 0xbeef
-
-
-#endif /* _LINUX_ELF_EM_H */
diff --git a/ANDROID_3.4.5/include/linux/elf-fdpic.h b/ANDROID_3.4.5/include/linux/elf-fdpic.h
deleted file mode 100644
index 7cd2e80c..00000000
--- a/ANDROID_3.4.5/include/linux/elf-fdpic.h
+++ /dev/null
@@ -1,70 +0,0 @@
-/* elf-fdpic.h: FDPIC ELF load map
- *
- * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#ifndef _LINUX_ELF_FDPIC_H
-#define _LINUX_ELF_FDPIC_H
-
-#include <linux/elf.h>
-
-#define PT_GNU_STACK    (PT_LOOS + 0x474e551)
-
-/* segment mappings for ELF FDPIC libraries/executables/interpreters */
-struct elf32_fdpic_loadseg {
-	Elf32_Addr	addr;		/* core address to which mapped */
-	Elf32_Addr	p_vaddr;	/* VMA recorded in file */
-	Elf32_Word	p_memsz;	/* allocation size recorded in file */
-};
-
-struct elf32_fdpic_loadmap {
-	Elf32_Half	version;	/* version of these structures, just in case... */
-	Elf32_Half	nsegs;		/* number of segments */
-	struct elf32_fdpic_loadseg segs[];
-};
-
-#define ELF32_FDPIC_LOADMAP_VERSION	0x0000
-
-/*
- * binfmt binary parameters structure
- */
-struct elf_fdpic_params {
-	struct elfhdr			hdr;		/* ref copy of ELF header */
-	struct elf_phdr			*phdrs;		/* ref copy of PT_PHDR table */
-	struct elf32_fdpic_loadmap	*loadmap;	/* loadmap to be passed to userspace */
-	unsigned long			elfhdr_addr;	/* mapped ELF header user address */
-	unsigned long			ph_addr;	/* mapped PT_PHDR user address */
-	unsigned long			map_addr;	/* mapped loadmap user address */
-	unsigned long			entry_addr;	/* mapped entry user address */
-	unsigned long			stack_size;	/* stack size requested (PT_GNU_STACK) */
-	unsigned long			dynamic_addr;	/* mapped PT_DYNAMIC user address */
-	unsigned long			load_addr;	/* user address at which to map binary */
-	unsigned long			flags;
-#define ELF_FDPIC_FLAG_ARRANGEMENT	0x0000000f	/* PT_LOAD arrangement flags */
-#define ELF_FDPIC_FLAG_INDEPENDENT	0x00000000	/* PT_LOADs can be put anywhere */
-#define ELF_FDPIC_FLAG_HONOURVADDR	0x00000001	/* PT_LOAD.vaddr must be honoured */
-#define ELF_FDPIC_FLAG_CONSTDISP	0x00000002	/* PT_LOADs require constant
-							 * displacement */
-#define ELF_FDPIC_FLAG_CONTIGUOUS	0x00000003	/* PT_LOADs should be contiguous */
-#define ELF_FDPIC_FLAG_EXEC_STACK	0x00000010	/* T if stack to be executable */
-#define ELF_FDPIC_FLAG_NOEXEC_STACK	0x00000020	/* T if stack not to be executable */
-#define ELF_FDPIC_FLAG_EXECUTABLE	0x00000040	/* T if this object is the executable */
-#define ELF_FDPIC_FLAG_PRESENT		0x80000000	/* T if this object is present */
-};
-
-#ifdef __KERNEL__
-#ifdef CONFIG_MMU
-extern void elf_fdpic_arch_lay_out_mm(struct elf_fdpic_params *exec_params,
-				      struct elf_fdpic_params *interp_params,
-				      unsigned long *start_stack,
-				      unsigned long *start_brk);
-#endif
-#endif /* __KERNEL__ */
-
-#endif /* _LINUX_ELF_FDPIC_H */
diff --git a/ANDROID_3.4.5/include/linux/elf.h b/ANDROID_3.4.5/include/linux/elf.h
deleted file mode 100644
index 999b4f52..00000000
--- a/ANDROID_3.4.5/include/linux/elf.h
+++ /dev/null
@@ -1,449 +0,0 @@
-#ifndef _LINUX_ELF_H
-#define _LINUX_ELF_H
-
-#include <linux/types.h>
-#include <linux/elf-em.h>
-#ifdef __KERNEL__
-#include <asm/elf.h>
-#endif
-
-/* 32-bit ELF base types. */
-typedef __u32	Elf32_Addr;
-typedef __u16	Elf32_Half;
-typedef __u32	Elf32_Off;
-typedef __s32	Elf32_Sword;
-typedef __u32	Elf32_Word;
-
-/* 64-bit ELF base types. */
-typedef __u64	Elf64_Addr;
-typedef __u16	Elf64_Half;
-typedef __s16	Elf64_SHalf;
-typedef __u64	Elf64_Off;
-typedef __s32	Elf64_Sword;
-typedef __u32	Elf64_Word;
-typedef __u64	Elf64_Xword;
-typedef __s64	Elf64_Sxword;
-
-/* These constants are for the segment types stored in the image headers */
-#define PT_NULL    0
-#define PT_LOAD    1
-#define PT_DYNAMIC 2
-#define PT_INTERP  3
-#define PT_NOTE    4
-#define PT_SHLIB   5
-#define PT_PHDR    6
-#define PT_TLS     7               /* Thread local storage segment */
-#define PT_LOOS    0x60000000      /* OS-specific */
-#define PT_HIOS    0x6fffffff      /* OS-specific */
-#define PT_LOPROC  0x70000000
-#define PT_HIPROC  0x7fffffff
-#define PT_GNU_EH_FRAME		0x6474e550
-
-#define PT_GNU_STACK	(PT_LOOS + 0x474e551)
-
-/*
- * Extended Numbering
- *
- * If the real number of program header table entries is larger than
- * or equal to PN_XNUM(0xffff), it is set to sh_info field of the
- * section header at index 0, and PN_XNUM is set to e_phnum
- * field. Otherwise, the section header at index 0 is zero
- * initialized, if it exists.
- *
- * Specifications are available in:
- *
- * - Sun microsystems: Linker and Libraries.
- *   Part No: 817-1984-17, September 2008.
- *   URL: http://docs.sun.com/app/docs/doc/817-1984
- *
- * - System V ABI AMD64 Architecture Processor Supplement
- *   Draft Version 0.99.,
- *   May 11, 2009.
- *   URL: http://www.x86-64.org/
- */
-#define PN_XNUM 0xffff
-
-/* These constants define the different elf file types */
-#define ET_NONE   0
-#define ET_REL    1
-#define ET_EXEC   2
-#define ET_DYN    3
-#define ET_CORE   4
-#define ET_LOPROC 0xff00
-#define ET_HIPROC 0xffff
-
-/* This is the info that is needed to parse the dynamic section of the file */
-#define DT_NULL		0
-#define DT_NEEDED	1
-#define DT_PLTRELSZ	2
-#define DT_PLTGOT	3
-#define DT_HASH		4
-#define DT_STRTAB	5
-#define DT_SYMTAB	6
-#define DT_RELA		7
-#define DT_RELASZ	8
-#define DT_RELAENT	9
-#define DT_STRSZ	10
-#define DT_SYMENT	11
-#define DT_INIT		12
-#define DT_FINI		13
-#define DT_SONAME	14
-#define DT_RPATH 	15
-#define DT_SYMBOLIC	16
-#define DT_REL	        17
-#define DT_RELSZ	18
-#define DT_RELENT	19
-#define DT_PLTREL	20
-#define DT_DEBUG	21
-#define DT_TEXTREL	22
-#define DT_JMPREL	23
-#define DT_ENCODING	32
-#define OLD_DT_LOOS	0x60000000
-#define DT_LOOS		0x6000000d
-#define DT_HIOS		0x6ffff000
-#define DT_VALRNGLO	0x6ffffd00
-#define DT_VALRNGHI	0x6ffffdff
-#define DT_ADDRRNGLO	0x6ffffe00
-#define DT_ADDRRNGHI	0x6ffffeff
-#define DT_VERSYM	0x6ffffff0
-#define DT_RELACOUNT	0x6ffffff9
-#define DT_RELCOUNT	0x6ffffffa
-#define DT_FLAGS_1	0x6ffffffb
-#define DT_VERDEF	0x6ffffffc
-#define	DT_VERDEFNUM	0x6ffffffd
-#define DT_VERNEED	0x6ffffffe
-#define	DT_VERNEEDNUM	0x6fffffff
-#define OLD_DT_HIOS     0x6fffffff
-#define DT_LOPROC	0x70000000
-#define DT_HIPROC	0x7fffffff
-
-/* This info is needed when parsing the symbol table */
-#define STB_LOCAL  0
-#define STB_GLOBAL 1
-#define STB_WEAK   2
-
-#define STT_NOTYPE  0
-#define STT_OBJECT  1
-#define STT_FUNC    2
-#define STT_SECTION 3
-#define STT_FILE    4
-#define STT_COMMON  5
-#define STT_TLS     6
-
-#define ELF_ST_BIND(x)		((x) >> 4)
-#define ELF_ST_TYPE(x)		(((unsigned int) x) & 0xf)
-#define ELF32_ST_BIND(x)	ELF_ST_BIND(x)
-#define ELF32_ST_TYPE(x)	ELF_ST_TYPE(x)
-#define ELF64_ST_BIND(x)	ELF_ST_BIND(x)
-#define ELF64_ST_TYPE(x)	ELF_ST_TYPE(x)
-
-typedef struct dynamic{
-  Elf32_Sword d_tag;
-  union{
-    Elf32_Sword	d_val;
-    Elf32_Addr	d_ptr;
-  } d_un;
-} Elf32_Dyn;
-
-typedef struct {
-  Elf64_Sxword d_tag;		/* entry tag value */
-  union {
-    Elf64_Xword d_val;
-    Elf64_Addr d_ptr;
-  } d_un;
-} Elf64_Dyn;
-
-/* The following are used with relocations */
-#define ELF32_R_SYM(x) ((x) >> 8)
-#define ELF32_R_TYPE(x) ((x) & 0xff)
-
-#define ELF64_R_SYM(i)			((i) >> 32)
-#define ELF64_R_TYPE(i)			((i) & 0xffffffff)
-
-typedef struct elf32_rel {
-  Elf32_Addr	r_offset;
-  Elf32_Word	r_info;
-} Elf32_Rel;
-
-typedef struct elf64_rel {
-  Elf64_Addr r_offset;	/* Location at which to apply the action */
-  Elf64_Xword r_info;	/* index and type of relocation */
-} Elf64_Rel;
-
-typedef struct elf32_rela{
-  Elf32_Addr	r_offset;
-  Elf32_Word	r_info;
-  Elf32_Sword	r_addend;
-} Elf32_Rela;
-
-typedef struct elf64_rela {
-  Elf64_Addr r_offset;	/* Location at which to apply the action */
-  Elf64_Xword r_info;	/* index and type of relocation */
-  Elf64_Sxword r_addend;	/* Constant addend used to compute value */
-} Elf64_Rela;
-
-typedef struct elf32_sym{
-  Elf32_Word	st_name;
-  Elf32_Addr	st_value;
-  Elf32_Word	st_size;
-  unsigned char	st_info;
-  unsigned char	st_other;
-  Elf32_Half	st_shndx;
-} Elf32_Sym;
-
-typedef struct elf64_sym {
-  Elf64_Word st_name;		/* Symbol name, index in string tbl */
-  unsigned char	st_info;	/* Type and binding attributes */
-  unsigned char	st_other;	/* No defined meaning, 0 */
-  Elf64_Half st_shndx;		/* Associated section index */
-  Elf64_Addr st_value;		/* Value of the symbol */
-  Elf64_Xword st_size;		/* Associated symbol size */
-} Elf64_Sym;
-
-
-#define EI_NIDENT	16
-
-typedef struct elf32_hdr{
-  unsigned char	e_ident[EI_NIDENT];
-  Elf32_Half	e_type;
-  Elf32_Half	e_machine;
-  Elf32_Word	e_version;
-  Elf32_Addr	e_entry;  /* Entry point */
-  Elf32_Off	e_phoff;
-  Elf32_Off	e_shoff;
-  Elf32_Word	e_flags;
-  Elf32_Half	e_ehsize;
-  Elf32_Half	e_phentsize;
-  Elf32_Half	e_phnum;
-  Elf32_Half	e_shentsize;
-  Elf32_Half	e_shnum;
-  Elf32_Half	e_shstrndx;
-} Elf32_Ehdr;
-
-typedef struct elf64_hdr {
-  unsigned char	e_ident[EI_NIDENT];	/* ELF "magic number" */
-  Elf64_Half e_type;
-  Elf64_Half e_machine;
-  Elf64_Word e_version;
-  Elf64_Addr e_entry;		/* Entry point virtual address */
-  Elf64_Off e_phoff;		/* Program header table file offset */
-  Elf64_Off e_shoff;		/* Section header table file offset */
-  Elf64_Word e_flags;
-  Elf64_Half e_ehsize;
-  Elf64_Half e_phentsize;
-  Elf64_Half e_phnum;
-  Elf64_Half e_shentsize;
-  Elf64_Half e_shnum;
-  Elf64_Half e_shstrndx;
-} Elf64_Ehdr;
-
-/* These constants define the permissions on sections in the program
-   header, p_flags. */
-#define PF_R		0x4
-#define PF_W		0x2
-#define PF_X		0x1
-
-typedef struct elf32_phdr{
-  Elf32_Word	p_type;
-  Elf32_Off	p_offset;
-  Elf32_Addr	p_vaddr;
-  Elf32_Addr	p_paddr;
-  Elf32_Word	p_filesz;
-  Elf32_Word	p_memsz;
-  Elf32_Word	p_flags;
-  Elf32_Word	p_align;
-} Elf32_Phdr;
-
-typedef struct elf64_phdr {
-  Elf64_Word p_type;
-  Elf64_Word p_flags;
-  Elf64_Off p_offset;		/* Segment file offset */
-  Elf64_Addr p_vaddr;		/* Segment virtual address */
-  Elf64_Addr p_paddr;		/* Segment physical address */
-  Elf64_Xword p_filesz;		/* Segment size in file */
-  Elf64_Xword p_memsz;		/* Segment size in memory */
-  Elf64_Xword p_align;		/* Segment alignment, file & memory */
-} Elf64_Phdr;
-
-/* sh_type */
-#define SHT_NULL	0
-#define SHT_PROGBITS	1
-#define SHT_SYMTAB	2
-#define SHT_STRTAB	3
-#define SHT_RELA	4
-#define SHT_HASH	5
-#define SHT_DYNAMIC	6
-#define SHT_NOTE	7
-#define SHT_NOBITS	8
-#define SHT_REL		9
-#define SHT_SHLIB	10
-#define SHT_DYNSYM	11
-#define SHT_NUM		12
-#define SHT_LOPROC	0x70000000
-#define SHT_HIPROC	0x7fffffff
-#define SHT_LOUSER	0x80000000
-#define SHT_HIUSER	0xffffffff
-
-/* sh_flags */
-#define SHF_WRITE	0x1
-#define SHF_ALLOC	0x2
-#define SHF_EXECINSTR	0x4
-#define SHF_MASKPROC	0xf0000000
-
-/* special section indexes */
-#define SHN_UNDEF	0
-#define SHN_LORESERVE	0xff00
-#define SHN_LOPROC	0xff00
-#define SHN_HIPROC	0xff1f
-#define SHN_ABS		0xfff1
-#define SHN_COMMON	0xfff2
-#define SHN_HIRESERVE	0xffff
- 
-typedef struct elf32_shdr {
-  Elf32_Word	sh_name;
-  Elf32_Word	sh_type;
-  Elf32_Word	sh_flags;
-  Elf32_Addr	sh_addr;
-  Elf32_Off	sh_offset;
-  Elf32_Word	sh_size;
-  Elf32_Word	sh_link;
-  Elf32_Word	sh_info;
-  Elf32_Word	sh_addralign;
-  Elf32_Word	sh_entsize;
-} Elf32_Shdr;
-
-typedef struct elf64_shdr {
-  Elf64_Word sh_name;		/* Section name, index in string tbl */
-  Elf64_Word sh_type;		/* Type of section */
-  Elf64_Xword sh_flags;		/* Miscellaneous section attributes */
-  Elf64_Addr sh_addr;		/* Section virtual addr at execution */
-  Elf64_Off sh_offset;		/* Section file offset */
-  Elf64_Xword sh_size;		/* Size of section in bytes */
-  Elf64_Word sh_link;		/* Index of another section */
-  Elf64_Word sh_info;		/* Additional section information */
-  Elf64_Xword sh_addralign;	/* Section alignment */
-  Elf64_Xword sh_entsize;	/* Entry size if section holds table */
-} Elf64_Shdr;
-
-#define	EI_MAG0		0		/* e_ident[] indexes */
-#define	EI_MAG1		1
-#define	EI_MAG2		2
-#define	EI_MAG3		3
-#define	EI_CLASS	4
-#define	EI_DATA		5
-#define	EI_VERSION	6
-#define	EI_OSABI	7
-#define	EI_PAD		8
-
-#define	ELFMAG0		0x7f		/* EI_MAG */
-#define	ELFMAG1		'E'
-#define	ELFMAG2		'L'
-#define	ELFMAG3		'F'
-#define	ELFMAG		"\177ELF"
-#define	SELFMAG		4
-
-#define	ELFCLASSNONE	0		/* EI_CLASS */
-#define	ELFCLASS32	1
-#define	ELFCLASS64	2
-#define	ELFCLASSNUM	3
-
-#define ELFDATANONE	0		/* e_ident[EI_DATA] */
-#define ELFDATA2LSB	1
-#define ELFDATA2MSB	2
-
-#define EV_NONE		0		/* e_version, EI_VERSION */
-#define EV_CURRENT	1
-#define EV_NUM		2
-
-#define ELFOSABI_NONE	0
-#define ELFOSABI_LINUX	3
-
-#ifndef ELF_OSABI
-#define ELF_OSABI ELFOSABI_NONE
-#endif
-
-/*
- * Notes used in ET_CORE. Architectures export some of the arch register sets
- * using the corresponding note types via the PTRACE_GETREGSET and
- * PTRACE_SETREGSET requests.
- */
-#define NT_PRSTATUS	1
-#define NT_PRFPREG	2
-#define NT_PRPSINFO	3
-#define NT_TASKSTRUCT	4
-#define NT_AUXV		6
-#define NT_PRXFPREG     0x46e62b7f      /* copied from gdb5.1/include/elf/common.h */
-#define NT_PPC_VMX	0x100		/* PowerPC Altivec/VMX registers */
-#define NT_PPC_SPE	0x101		/* PowerPC SPE/EVR registers */
-#define NT_PPC_VSX	0x102		/* PowerPC VSX registers */
-#define NT_386_TLS	0x200		/* i386 TLS slots (struct user_desc) */
-#define NT_386_IOPERM	0x201		/* x86 io permission bitmap (1=deny) */
-#define NT_X86_XSTATE	0x202		/* x86 extended state using xsave */
-#define NT_S390_HIGH_GPRS	0x300	/* s390 upper register halves */
-#define NT_S390_TIMER	0x301		/* s390 timer register */
-#define NT_S390_TODCMP	0x302		/* s390 TOD clock comparator register */
-#define NT_S390_TODPREG	0x303		/* s390 TOD programmable register */
-#define NT_S390_CTRS	0x304		/* s390 control registers */
-#define NT_S390_PREFIX	0x305		/* s390 prefix register */
-#define NT_S390_LAST_BREAK	0x306	/* s390 breaking event address */
-#define NT_S390_SYSTEM_CALL	0x307	/* s390 system call restart data */
-#define NT_ARM_VFP	0x400		/* ARM VFP/NEON registers */
-
-
-/* Note header in a PT_NOTE section */
-typedef struct elf32_note {
-  Elf32_Word	n_namesz;	/* Name size */
-  Elf32_Word	n_descsz;	/* Content size */
-  Elf32_Word	n_type;		/* Content type */
-} Elf32_Nhdr;
-
-/* Note header in a PT_NOTE section */
-typedef struct elf64_note {
-  Elf64_Word n_namesz;	/* Name size */
-  Elf64_Word n_descsz;	/* Content size */
-  Elf64_Word n_type;	/* Content type */
-} Elf64_Nhdr;
-
-#ifdef __KERNEL__
-#ifndef elf_read_implies_exec
-  /* Executables for which elf_read_implies_exec() returns TRUE will
-     have the READ_IMPLIES_EXEC personality flag set automatically.
-     Override in asm/elf.h as needed.  */
-# define elf_read_implies_exec(ex, have_pt_gnu_stack)	0
-#endif
-
-#if ELF_CLASS == ELFCLASS32
-
-extern Elf32_Dyn _DYNAMIC [];
-#define elfhdr		elf32_hdr
-#define elf_phdr	elf32_phdr
-#define elf_shdr	elf32_shdr
-#define elf_note	elf32_note
-#define elf_addr_t	Elf32_Off
-#define Elf_Half	Elf32_Half
-
-#else
-
-extern Elf64_Dyn _DYNAMIC [];
-#define elfhdr		elf64_hdr
-#define elf_phdr	elf64_phdr
-#define elf_shdr	elf64_shdr
-#define elf_note	elf64_note
-#define elf_addr_t	Elf64_Off
-#define Elf_Half	Elf64_Half
-
-#endif
-
-/* Optional callbacks to write extra ELF notes. */
-struct file;
-
-#ifndef ARCH_HAVE_EXTRA_ELF_NOTES
-static inline int elf_coredump_extra_notes_size(void) { return 0; }
-static inline int elf_coredump_extra_notes_write(struct file *file,
-			loff_t *foffset) { return 0; }
-#else
-extern int elf_coredump_extra_notes_size(void);
-extern int elf_coredump_extra_notes_write(struct file *file, loff_t *foffset);
-#endif
-#endif /* __KERNEL__ */
-#endif /* _LINUX_ELF_H */
diff --git a/ANDROID_3.4.5/include/linux/elfcore-compat.h b/ANDROID_3.4.5/include/linux/elfcore-compat.h
deleted file mode 100644
index 0a90e1c3..00000000
--- a/ANDROID_3.4.5/include/linux/elfcore-compat.h
+++ /dev/null
@@ -1,55 +0,0 @@
-#ifndef _LINUX_ELFCORE_COMPAT_H
-#define _LINUX_ELFCORE_COMPAT_H
-
-#include <linux/elf.h>
-#include <linux/elfcore.h>
-#include <linux/compat.h>
-
-/*
- * Make sure these layouts match the linux/elfcore.h native definitions.
- */
-
-struct compat_elf_siginfo
-{
-	compat_int_t			si_signo;
-	compat_int_t			si_code;
-	compat_int_t			si_errno;
-};
-
-struct compat_elf_prstatus
-{
-	struct compat_elf_siginfo	pr_info;
-	short				pr_cursig;
-	compat_ulong_t			pr_sigpend;
-	compat_ulong_t			pr_sighold;
-	compat_pid_t			pr_pid;
-	compat_pid_t			pr_ppid;
-	compat_pid_t			pr_pgrp;
-	compat_pid_t			pr_sid;
-	struct compat_timeval		pr_utime;
-	struct compat_timeval		pr_stime;
-	struct compat_timeval		pr_cutime;
-	struct compat_timeval		pr_cstime;
-	compat_elf_gregset_t		pr_reg;
-#ifdef CONFIG_BINFMT_ELF_FDPIC
-	compat_ulong_t			pr_exec_fdpic_loadmap;
-	compat_ulong_t			pr_interp_fdpic_loadmap;
-#endif
-	compat_int_t			pr_fpvalid;
-};
-
-struct compat_elf_prpsinfo
-{
-	char				pr_state;
-	char				pr_sname;
-	char				pr_zomb;
-	char				pr_nice;
-	compat_ulong_t			pr_flag;
-	__compat_uid_t			pr_uid;
-	__compat_gid_t			pr_gid;
-	compat_pid_t			pr_pid, pr_ppid, pr_pgrp, pr_sid;
-	char				pr_fname[16];
-	char				pr_psargs[ELF_PRARGSZ];
-};
-
-#endif /* _LINUX_ELFCORE_COMPAT_H */
diff --git a/ANDROID_3.4.5/include/linux/elfcore.h b/ANDROID_3.4.5/include/linux/elfcore.h
deleted file mode 100644
index 0698c79f..00000000
--- a/ANDROID_3.4.5/include/linux/elfcore.h
+++ /dev/null
@@ -1,172 +0,0 @@
-#ifndef _LINUX_ELFCORE_H
-#define _LINUX_ELFCORE_H
-
-#include <linux/types.h>
-#include <linux/signal.h>
-#include <linux/time.h>
-#ifdef __KERNEL__
-#include <linux/user.h>
-#include <linux/bug.h>
-#endif
-#include <linux/ptrace.h>
-#include <linux/elf.h>
-#include <linux/fs.h>
-
-struct elf_siginfo
-{
-	int	si_signo;			/* signal number */
-	int	si_code;			/* extra code */
-	int	si_errno;			/* errno */
-};
-
-#ifdef __KERNEL__
-#include <asm/elf.h>
-#endif
-
-#ifndef __KERNEL__
-typedef elf_greg_t greg_t;
-typedef elf_gregset_t gregset_t;
-typedef elf_fpregset_t fpregset_t;
-typedef elf_fpxregset_t fpxregset_t;
-#define NGREG ELF_NGREG
-#endif
-
-/*
- * Definitions to generate Intel SVR4-like core files.
- * These mostly have the same names as the SVR4 types with "elf_"
- * tacked on the front to prevent clashes with linux definitions,
- * and the typedef forms have been avoided.  This is mostly like
- * the SVR4 structure, but more Linuxy, with things that Linux does
- * not support and which gdb doesn't really use excluded.
- * Fields present but not used are marked with "XXX".
- */
-struct elf_prstatus
-{
-#if 0
-	long	pr_flags;	/* XXX Process flags */
-	short	pr_why;		/* XXX Reason for process halt */
-	short	pr_what;	/* XXX More detailed reason */
-#endif
-	struct elf_siginfo pr_info;	/* Info associated with signal */
-	short	pr_cursig;		/* Current signal */
-	unsigned long pr_sigpend;	/* Set of pending signals */
-	unsigned long pr_sighold;	/* Set of held signals */
-#if 0
-	struct sigaltstack pr_altstack;	/* Alternate stack info */
-	struct sigaction pr_action;	/* Signal action for current sig */
-#endif
-	pid_t	pr_pid;
-	pid_t	pr_ppid;
-	pid_t	pr_pgrp;
-	pid_t	pr_sid;
-	struct timeval pr_utime;	/* User time */
-	struct timeval pr_stime;	/* System time */
-	struct timeval pr_cutime;	/* Cumulative user time */
-	struct timeval pr_cstime;	/* Cumulative system time */
-#if 0
-	long	pr_instr;		/* Current instruction */
-#endif
-	elf_gregset_t pr_reg;	/* GP registers */
-#ifdef CONFIG_BINFMT_ELF_FDPIC
-	/* When using FDPIC, the loadmap addresses need to be communicated
-	 * to GDB in order for GDB to do the necessary relocations.  The
-	 * fields (below) used to communicate this information are placed
-	 * immediately after ``pr_reg'', so that the loadmap addresses may
-	 * be viewed as part of the register set if so desired.
-	 */
-	unsigned long pr_exec_fdpic_loadmap;
-	unsigned long pr_interp_fdpic_loadmap;
-#endif
-	int pr_fpvalid;		/* True if math co-processor being used.  */
-};
-
-#define ELF_PRARGSZ	(80)	/* Number of chars for args */
-
-struct elf_prpsinfo
-{
-	char	pr_state;	/* numeric process state */
-	char	pr_sname;	/* char for pr_state */
-	char	pr_zomb;	/* zombie */
-	char	pr_nice;	/* nice val */
-	unsigned long pr_flag;	/* flags */
-	__kernel_uid_t	pr_uid;
-	__kernel_gid_t	pr_gid;
-	pid_t	pr_pid, pr_ppid, pr_pgrp, pr_sid;
-	/* Lots missing */
-	char	pr_fname[16];	/* filename of executable */
-	char	pr_psargs[ELF_PRARGSZ];	/* initial part of arg list */
-};
-
-#ifndef __KERNEL__
-typedef struct elf_prstatus prstatus_t;
-typedef struct elf_prpsinfo prpsinfo_t;
-#define PRARGSZ ELF_PRARGSZ 
-#endif
-
-#ifdef __KERNEL__
-static inline void elf_core_copy_regs(elf_gregset_t *elfregs, struct pt_regs *regs)
-{
-#ifdef ELF_CORE_COPY_REGS
-	ELF_CORE_COPY_REGS((*elfregs), regs)
-#else
-	BUG_ON(sizeof(*elfregs) != sizeof(*regs));
-	*(struct pt_regs *)elfregs = *regs;
-#endif
-}
-
-static inline void elf_core_copy_kernel_regs(elf_gregset_t *elfregs, struct pt_regs *regs)
-{
-#ifdef ELF_CORE_COPY_KERNEL_REGS
-	ELF_CORE_COPY_KERNEL_REGS((*elfregs), regs);
-#else
-	elf_core_copy_regs(elfregs, regs);
-#endif
-}
-
-static inline int elf_core_copy_task_regs(struct task_struct *t, elf_gregset_t* elfregs)
-{
-#if defined (ELF_CORE_COPY_TASK_REGS)
-	return ELF_CORE_COPY_TASK_REGS(t, elfregs);
-#elif defined (task_pt_regs)
-	elf_core_copy_regs(elfregs, task_pt_regs(t));
-#endif
-	return 0;
-}
-
-extern int dump_fpu (struct pt_regs *, elf_fpregset_t *);
-
-static inline int elf_core_copy_task_fpregs(struct task_struct *t, struct pt_regs *regs, elf_fpregset_t *fpu)
-{
-#ifdef ELF_CORE_COPY_FPREGS
-	return ELF_CORE_COPY_FPREGS(t, fpu);
-#else
-	return dump_fpu(regs, fpu);
-#endif
-}
-
-#ifdef ELF_CORE_COPY_XFPREGS
-static inline int elf_core_copy_task_xfpregs(struct task_struct *t, elf_fpxregset_t *xfpu)
-{
-	return ELF_CORE_COPY_XFPREGS(t, xfpu);
-}
-#endif
-
-/*
- * These functions parameterize elf_core_dump in fs/binfmt_elf.c to write out
- * extra segments containing the gate DSO contents.  Dumping its
- * contents makes post-mortem fully interpretable later without matching up
- * the same kernel and hardware config to see what PC values meant.
- * Dumping its extra ELF program headers includes all the other information
- * a debugger needs to easily find how the gate DSO was being used.
- */
-extern Elf_Half elf_core_extra_phdrs(void);
-extern int
-elf_core_write_extra_phdrs(struct file *file, loff_t offset, size_t *size,
-			   unsigned long limit);
-extern int
-elf_core_write_extra_data(struct file *file, size_t *size, unsigned long limit);
-extern size_t elf_core_extra_data_size(void);
-
-#endif /* __KERNEL__ */
-
-#endif /* _LINUX_ELFCORE_H */
diff --git a/ANDROID_3.4.5/include/linux/elfnote.h b/ANDROID_3.4.5/include/linux/elfnote.h
deleted file mode 100644
index 278e3ef0..00000000
--- a/ANDROID_3.4.5/include/linux/elfnote.h
+++ /dev/null
@@ -1,98 +0,0 @@
-#ifndef _LINUX_ELFNOTE_H
-#define _LINUX_ELFNOTE_H
-/*
- * Helper macros to generate ELF Note structures, which are put into a
- * PT_NOTE segment of the final vmlinux image.  These are useful for
- * including name-value pairs of metadata into the kernel binary (or
- * modules?) for use by external programs.
- *
- * Each note has three parts: a name, a type and a desc.  The name is
- * intended to distinguish the note's originator, so it would be a
- * company, project, subsystem, etc; it must be in a suitable form for
- * use in a section name.  The type is an integer which is used to tag
- * the data, and is considered to be within the "name" namespace (so
- * "FooCo"'s type 42 is distinct from "BarProj"'s type 42).  The
- * "desc" field is the actual data.  There are no constraints on the
- * desc field's contents, though typically they're fairly small.
- *
- * All notes from a given NAME are put into a section named
- * .note.NAME.  When the kernel image is finally linked, all the notes
- * are packed into a single .notes section, which is mapped into the
- * PT_NOTE segment.  Because notes for a given name are grouped into
- * the same section, they'll all be adjacent the output file.
- *
- * This file defines macros for both C and assembler use.  Their
- * syntax is slightly different, but they're semantically similar.
- *
- * See the ELF specification for more detail about ELF notes.
- */
-
-#ifdef __ASSEMBLER__
-/*
- * Generate a structure with the same shape as Elf{32,64}_Nhdr (which
- * turn out to be the same size and shape), followed by the name and
- * desc data with appropriate padding.  The 'desctype' argument is the
- * assembler pseudo op defining the type of the data e.g. .asciz while
- * 'descdata' is the data itself e.g.  "hello, world".
- *
- * e.g. ELFNOTE(XYZCo, 42, .asciz, "forty-two")
- *      ELFNOTE(XYZCo, 12, .long, 0xdeadbeef)
- */
-#define ELFNOTE_START(name, type, flags)	\
-.pushsection .note.name, flags,@note	;	\
-  .balign 4				;	\
-  .long 2f - 1f		/* namesz */	;	\
-  .long 4484f - 3f	/* descsz */	;	\
-  .long type				;	\
-1:.asciz #name				;	\
-2:.balign 4				;	\
-3:
-
-#define ELFNOTE_END				\
-4484:.balign 4				;	\
-.popsection				;
-
-#define ELFNOTE(name, type, desc)		\
-	ELFNOTE_START(name, type, "")		\
-		desc			;	\
-	ELFNOTE_END
-
-#else	/* !__ASSEMBLER__ */
-#include <linux/elf.h>
-/*
- * Use an anonymous structure which matches the shape of
- * Elf{32,64}_Nhdr, but includes the name and desc data.  The size and
- * type of name and desc depend on the macro arguments.  "name" must
- * be a literal string, and "desc" must be passed by value.  You may
- * only define one note per line, since __LINE__ is used to generate
- * unique symbols.
- */
-#define _ELFNOTE_PASTE(a,b)	a##b
-#define _ELFNOTE(size, name, unique, type, desc)			\
-	static const struct {						\
-		struct elf##size##_note _nhdr;				\
-		unsigned char _name[sizeof(name)]			\
-		__attribute__((aligned(sizeof(Elf##size##_Word))));	\
-		typeof(desc) _desc					\
-			     __attribute__((aligned(sizeof(Elf##size##_Word)))); \
-	} _ELFNOTE_PASTE(_note_, unique)				\
-		__used							\
-		__attribute__((section(".note." name),			\
-			       aligned(sizeof(Elf##size##_Word)),	\
-			       unused)) = {				\
-		{							\
-			sizeof(name),					\
-			sizeof(desc),					\
-			type,						\
-		},							\
-		name,							\
-		desc							\
-	}
-#define ELFNOTE(size, name, type, desc)		\
-	_ELFNOTE(size, name, __LINE__, type, desc)
-
-#define ELFNOTE32(name, type, desc) ELFNOTE(32, name, type, desc)
-#define ELFNOTE64(name, type, desc) ELFNOTE(64, name, type, desc)
-#endif	/* __ASSEMBLER__ */
-
-#endif /* _LINUX_ELFNOTE_H */
diff --git a/ANDROID_3.4.5/include/linux/enclosure.h b/ANDROID_3.4.5/include/linux/enclosure.h
deleted file mode 100644
index 9a33c5f7..00000000
--- a/ANDROID_3.4.5/include/linux/enclosure.h
+++ /dev/null
@@ -1,133 +0,0 @@
-/*
- * Enclosure Services
- *
- * Copyright (C) 2008 James Bottomley <James.Bottomley@HansenPartnership.com>
- *
-**-----------------------------------------------------------------------------
-**
-**  This program is free software; you can redistribute it and/or
-**  modify it under the terms of the GNU General Public License
-**  version 2 as published by the Free Software Foundation.
-**
-**  This program is distributed in the hope that it will be useful,
-**  but WITHOUT ANY WARRANTY; without even the implied warranty of
-**  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-**  GNU General Public License for more details.
-**
-**  You should have received a copy of the GNU General Public License
-**  along with this program; if not, write to the Free Software
-**  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-**
-**-----------------------------------------------------------------------------
-*/
-#ifndef _LINUX_ENCLOSURE_H_
-#define _LINUX_ENCLOSURE_H_
-
-#include <linux/device.h>
-#include <linux/list.h>
-
-/* A few generic types ... taken from ses-2 */
-enum enclosure_component_type {
-	ENCLOSURE_COMPONENT_DEVICE = 0x01,
-	ENCLOSURE_COMPONENT_ARRAY_DEVICE = 0x17,
-};
-
-/* ses-2 common element status */
-enum enclosure_status {
-	ENCLOSURE_STATUS_UNSUPPORTED = 0,
-	ENCLOSURE_STATUS_OK,
-	ENCLOSURE_STATUS_CRITICAL,
-	ENCLOSURE_STATUS_NON_CRITICAL,
-	ENCLOSURE_STATUS_UNRECOVERABLE,
-	ENCLOSURE_STATUS_NOT_INSTALLED,
-	ENCLOSURE_STATUS_UNKNOWN,
-	ENCLOSURE_STATUS_UNAVAILABLE,
-	/* last element for counting purposes */
-	ENCLOSURE_STATUS_MAX
-};
-
-/* SFF-8485 activity light settings */
-enum enclosure_component_setting {
-	ENCLOSURE_SETTING_DISABLED = 0,
-	ENCLOSURE_SETTING_ENABLED = 1,
-	ENCLOSURE_SETTING_BLINK_A_ON_OFF = 2,
-	ENCLOSURE_SETTING_BLINK_A_OFF_ON = 3,
-	ENCLOSURE_SETTING_BLINK_B_ON_OFF = 6,
-	ENCLOSURE_SETTING_BLINK_B_OFF_ON = 7,
-};
-
-struct enclosure_device;
-struct enclosure_component;
-struct enclosure_component_callbacks {
-	void (*get_status)(struct enclosure_device *,
-			     struct enclosure_component *);
-	int (*set_status)(struct enclosure_device *,
-			  struct enclosure_component *,
-			  enum enclosure_status);
-	void (*get_fault)(struct enclosure_device *,
-			  struct enclosure_component *);
-	int (*set_fault)(struct enclosure_device *,
-			 struct enclosure_component *,
-			 enum enclosure_component_setting);
-	void (*get_active)(struct enclosure_device *,
-			   struct enclosure_component *);
-	int (*set_active)(struct enclosure_device *,
-			  struct enclosure_component *,
-			  enum enclosure_component_setting);
-	void (*get_locate)(struct enclosure_device *,
-			   struct enclosure_component *);
-	int (*set_locate)(struct enclosure_device *,
-			  struct enclosure_component *,
-			  enum enclosure_component_setting);
-};
-
-
-struct enclosure_component {
-	void *scratch;
-	struct device cdev;
-	struct device *dev;
-	enum enclosure_component_type type;
-	int number;
-	int fault;
-	int active;
-	int locate;
-	enum enclosure_status status;
-};
-
-struct enclosure_device {
-	void *scratch;
-	struct list_head node;
-	struct device edev;
-	struct enclosure_component_callbacks *cb;
-	int components;
-	struct enclosure_component component[0];
-};
-
-static inline struct enclosure_device *
-to_enclosure_device(struct device *dev)
-{
-	return container_of(dev, struct enclosure_device, edev);
-}
-
-static inline struct enclosure_component *
-to_enclosure_component(struct device *dev)
-{
-	return container_of(dev, struct enclosure_component, cdev);
-}
-
-struct enclosure_device *
-enclosure_register(struct device *, const char *, int,
-		   struct enclosure_component_callbacks *);
-void enclosure_unregister(struct enclosure_device *);
-struct enclosure_component *
-enclosure_component_register(struct enclosure_device *, unsigned int,
-				 enum enclosure_component_type, const char *);
-int enclosure_add_device(struct enclosure_device *enclosure, int component,
-			 struct device *dev);
-int enclosure_remove_device(struct enclosure_device *, struct device *);
-struct enclosure_device *enclosure_find(struct device *dev,
-					struct enclosure_device *start);
-int enclosure_for_each_device(int (*fn)(struct enclosure_device *, void *),
-			      void *data);
-
-#endif /* _LINUX_ENCLOSURE_H_ */
diff --git a/ANDROID_3.4.5/include/linux/err.h b/ANDROID_3.4.5/include/linux/err.h
deleted file mode 100644
index f2edce25..00000000
--- a/ANDROID_3.4.5/include/linux/err.h
+++ /dev/null
@@ -1,65 +0,0 @@
-#ifndef _LINUX_ERR_H
-#define _LINUX_ERR_H
-
-#include <linux/compiler.h>
-
-#include <asm/errno.h>
-
-/*
- * Kernel pointers have redundant information, so we can use a
- * scheme where we can return either an error code or a dentry
- * pointer with the same return value.
- *
- * This should be a per-architecture thing, to allow different
- * error and pointer decisions.
- */
-#define MAX_ERRNO	4095
-
-#ifndef __ASSEMBLY__
-
-#define IS_ERR_VALUE(x) unlikely((x) >= (unsigned long)-MAX_ERRNO)
-
-static inline void * __must_check ERR_PTR(long error)
-{
-	return (void *) error;
-}
-
-static inline long __must_check PTR_ERR(const void *ptr)
-{
-	return (long) ptr;
-}
-
-static inline long __must_check IS_ERR(const void *ptr)
-{
-	return IS_ERR_VALUE((unsigned long)ptr);
-}
-
-static inline long __must_check IS_ERR_OR_NULL(const void *ptr)
-{
-	return !ptr || IS_ERR_VALUE((unsigned long)ptr);
-}
-
-/**
- * ERR_CAST - Explicitly cast an error-valued pointer to another pointer type
- * @ptr: The pointer to cast.
- *
- * Explicitly cast an error-valued pointer to another pointer type in such a
- * way as to make it clear that's what's going on.
- */
-static inline void * __must_check ERR_CAST(const void *ptr)
-{
-	/* cast away the const */
-	return (void *) ptr;
-}
-
-static inline int __must_check PTR_RET(const void *ptr)
-{
-	if (IS_ERR(ptr))
-		return PTR_ERR(ptr);
-	else
-		return 0;
-}
-
-#endif
-
-#endif /* _LINUX_ERR_H */
diff --git a/ANDROID_3.4.5/include/linux/errno.h b/ANDROID_3.4.5/include/linux/errno.h
deleted file mode 100644
index 2d09bfa5..00000000
--- a/ANDROID_3.4.5/include/linux/errno.h
+++ /dev/null
@@ -1,35 +0,0 @@
-#ifndef _LINUX_ERRNO_H
-#define _LINUX_ERRNO_H
-
-#include <asm/errno.h>
-
-#ifdef __KERNEL__
-
-/*
- * These should never be seen by user programs.  To return one of ERESTART*
- * codes, signal_pending() MUST be set.  Note that ptrace can observe these
- * at syscall exit tracing, but they will never be left for the debugged user
- * process to see.
- */
-#define ERESTARTSYS	512
-#define ERESTARTNOINTR	513
-#define ERESTARTNOHAND	514	/* restart if no handler.. */
-#define ENOIOCTLCMD	515	/* No ioctl command */
-#define ERESTART_RESTARTBLOCK 516 /* restart by calling sys_restart_syscall */
-#define EPROBE_DEFER	517	/* Driver requests probe retry */
-
-/* Defined for the NFSv3 protocol */
-#define EBADHANDLE	521	/* Illegal NFS file handle */
-#define ENOTSYNC	522	/* Update synchronization mismatch */
-#define EBADCOOKIE	523	/* Cookie is stale */
-#define ENOTSUPP	524	/* Operation is not supported */
-#define ETOOSMALL	525	/* Buffer or request is too small */
-#define ESERVERFAULT	526	/* An untranslatable error occurred */
-#define EBADTYPE	527	/* Type not supported by server */
-#define EJUKEBOX	528	/* Request initiated, but will not complete before timeout */
-#define EIOCBQUEUED	529	/* iocb queued, will get completion event */
-#define EIOCBRETRY	530	/* iocb queued, will trigger a retry */
-
-#endif
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/errqueue.h b/ANDROID_3.4.5/include/linux/errqueue.h
deleted file mode 100644
index fd0628be..00000000
--- a/ANDROID_3.4.5/include/linux/errqueue.h
+++ /dev/null
@@ -1,48 +0,0 @@
-#ifndef _LINUX_ERRQUEUE_H
-#define _LINUX_ERRQUEUE_H 1
-
-#include <linux/types.h>
-
-struct sock_extended_err {
-	__u32	ee_errno;	
-	__u8	ee_origin;
-	__u8	ee_type;
-	__u8	ee_code;
-	__u8	ee_pad;
-	__u32   ee_info;
-	__u32   ee_data;
-};
-
-#define SO_EE_ORIGIN_NONE	0
-#define SO_EE_ORIGIN_LOCAL	1
-#define SO_EE_ORIGIN_ICMP	2
-#define SO_EE_ORIGIN_ICMP6	3
-#define SO_EE_ORIGIN_TXSTATUS	4
-#define SO_EE_ORIGIN_TIMESTAMPING SO_EE_ORIGIN_TXSTATUS
-
-#define SO_EE_OFFENDER(ee)	((struct sockaddr*)((ee)+1))
-
-#ifdef __KERNEL__
-
-#include <net/ip.h>
-#if IS_ENABLED(CONFIG_IPV6)
-#include <linux/ipv6.h>
-#endif
-
-#define SKB_EXT_ERR(skb) ((struct sock_exterr_skb *) ((skb)->cb))
-
-struct sock_exterr_skb {
-	union {
-		struct inet_skb_parm	h4;
-#if IS_ENABLED(CONFIG_IPV6)
-		struct inet6_skb_parm	h6;
-#endif
-	} header;
-	struct sock_extended_err	ee;
-	u16				addr_offset;
-	__be16				port;
-};
-
-#endif
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/etherdevice.h b/ANDROID_3.4.5/include/linux/etherdevice.h
deleted file mode 100644
index fe5136d8..00000000
--- a/ANDROID_3.4.5/include/linux/etherdevice.h
+++ /dev/null
@@ -1,280 +0,0 @@
-/*
- * INET		An implementation of the TCP/IP protocol suite for the LINUX
- *		operating system.  NET  is implemented using the  BSD Socket
- *		interface as the means of communication with the user level.
- *
- *		Definitions for the Ethernet handlers.
- *
- * Version:	@(#)eth.h	1.0.4	05/13/93
- *
- * Authors:	Ross Biro
- *		Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
- *
- *		Relocated to include/linux where it belongs by Alan Cox 
- *							<gw4pts@gw4pts.ampr.org>
- *
- *		This program is free software; you can redistribute it and/or
- *		modify it under the terms of the GNU General Public License
- *		as published by the Free Software Foundation; either version
- *		2 of the License, or (at your option) any later version.
- *
- *	WARNING: This move may well be temporary. This file will get merged with others RSN.
- *
- */
-#ifndef _LINUX_ETHERDEVICE_H
-#define _LINUX_ETHERDEVICE_H
-
-#include <linux/if_ether.h>
-#include <linux/netdevice.h>
-#include <linux/random.h>
-#include <asm/unaligned.h>
-
-#ifdef __KERNEL__
-extern __be16		eth_type_trans(struct sk_buff *skb, struct net_device *dev);
-extern const struct header_ops eth_header_ops;
-
-extern int eth_header(struct sk_buff *skb, struct net_device *dev,
-		      unsigned short type,
-		      const void *daddr, const void *saddr, unsigned len);
-extern int eth_rebuild_header(struct sk_buff *skb);
-extern int eth_header_parse(const struct sk_buff *skb, unsigned char *haddr);
-extern int eth_header_cache(const struct neighbour *neigh, struct hh_cache *hh, __be16 type);
-extern void eth_header_cache_update(struct hh_cache *hh,
-				    const struct net_device *dev,
-				    const unsigned char *haddr);
-extern int eth_mac_addr(struct net_device *dev, void *p);
-extern int eth_change_mtu(struct net_device *dev, int new_mtu);
-extern int eth_validate_addr(struct net_device *dev);
-
-
-
-extern struct net_device *alloc_etherdev_mqs(int sizeof_priv, unsigned int txqs,
-					    unsigned int rxqs);
-#define alloc_etherdev(sizeof_priv) alloc_etherdev_mq(sizeof_priv, 1)
-#define alloc_etherdev_mq(sizeof_priv, count) alloc_etherdev_mqs(sizeof_priv, count, count)
-
-/**
- * is_zero_ether_addr - Determine if give Ethernet address is all zeros.
- * @addr: Pointer to a six-byte array containing the Ethernet address
- *
- * Return true if the address is all zeroes.
- */
-static inline int is_zero_ether_addr(const u8 *addr)
-{
-	return !(addr[0] | addr[1] | addr[2] | addr[3] | addr[4] | addr[5]);
-}
-
-/**
- * is_multicast_ether_addr - Determine if the Ethernet address is a multicast.
- * @addr: Pointer to a six-byte array containing the Ethernet address
- *
- * Return true if the address is a multicast address.
- * By definition the broadcast address is also a multicast address.
- */
-static inline int is_multicast_ether_addr(const u8 *addr)
-{
-	return 0x01 & addr[0];
-}
-
-/**
- * is_local_ether_addr - Determine if the Ethernet address is locally-assigned one (IEEE 802).
- * @addr: Pointer to a six-byte array containing the Ethernet address
- *
- * Return true if the address is a local address.
- */
-static inline int is_local_ether_addr(const u8 *addr)
-{
-	return 0x02 & addr[0];
-}
-
-/**
- * is_broadcast_ether_addr - Determine if the Ethernet address is broadcast
- * @addr: Pointer to a six-byte array containing the Ethernet address
- *
- * Return true if the address is the broadcast address.
- */
-static inline int is_broadcast_ether_addr(const u8 *addr)
-{
-	return (addr[0] & addr[1] & addr[2] & addr[3] & addr[4] & addr[5]) == 0xff;
-}
-
-/**
- * is_unicast_ether_addr - Determine if the Ethernet address is unicast
- * @addr: Pointer to a six-byte array containing the Ethernet address
- *
- * Return true if the address is a unicast address.
- */
-static inline int is_unicast_ether_addr(const u8 *addr)
-{
-	return !is_multicast_ether_addr(addr);
-}
-
-/**
- * is_valid_ether_addr - Determine if the given Ethernet address is valid
- * @addr: Pointer to a six-byte array containing the Ethernet address
- *
- * Check that the Ethernet address (MAC) is not 00:00:00:00:00:00, is not
- * a multicast address, and is not FF:FF:FF:FF:FF:FF.
- *
- * Return true if the address is valid.
- */
-static inline int is_valid_ether_addr(const u8 *addr)
-{
-	/* FF:FF:FF:FF:FF:FF is a multicast address so we don't need to
-	 * explicitly check for it here. */
-	return !is_multicast_ether_addr(addr) && !is_zero_ether_addr(addr);
-}
-
-/**
- * random_ether_addr - Generate software assigned random Ethernet address
- * @addr: Pointer to a six-byte array containing the Ethernet address
- *
- * Generate a random Ethernet address (MAC) that is not multicast
- * and has the local assigned bit set.
- */
-static inline void random_ether_addr(u8 *addr)
-{
-	get_random_bytes (addr, ETH_ALEN);
-	addr [0] &= 0xfe;	/* clear multicast bit */
-	addr [0] |= 0x02;	/* set local assignment bit (IEEE802) */
-}
-
-/**
- * eth_hw_addr_random - Generate software assigned random Ethernet and
- * set device flag
- * @dev: pointer to net_device structure
- *
- * Generate a random Ethernet address (MAC) to be used by a net device
- * and set addr_assign_type so the state can be read by sysfs and be
- * used by userspace.
- */
-static inline void eth_hw_addr_random(struct net_device *dev)
-{
-	dev->addr_assign_type |= NET_ADDR_RANDOM;
-	random_ether_addr(dev->dev_addr);
-}
-
-/**
- * compare_ether_addr - Compare two Ethernet addresses
- * @addr1: Pointer to a six-byte array containing the Ethernet address
- * @addr2: Pointer other six-byte array containing the Ethernet address
- *
- * Compare two ethernet addresses, returns 0 if equal, non-zero otherwise.
- * Unlike memcmp(), it doesn't return a value suitable for sorting.
- */
-static inline unsigned compare_ether_addr(const u8 *addr1, const u8 *addr2)
-{
-	const u16 *a = (const u16 *) addr1;
-	const u16 *b = (const u16 *) addr2;
-
-	BUILD_BUG_ON(ETH_ALEN != 6);
-	return ((a[0] ^ b[0]) | (a[1] ^ b[1]) | (a[2] ^ b[2])) != 0;
-}
-
-static inline unsigned long zap_last_2bytes(unsigned long value)
-{
-#ifdef __BIG_ENDIAN
-	return value >> 16;
-#else
-	return value << 16;
-#endif
-}
-
-/**
- * compare_ether_addr_64bits - Compare two Ethernet addresses
- * @addr1: Pointer to an array of 8 bytes
- * @addr2: Pointer to an other array of 8 bytes
- *
- * Compare two ethernet addresses, returns 0 if equal, non-zero otherwise.
- * Unlike memcmp(), it doesn't return a value suitable for sorting.
- * The function doesn't need any conditional branches and possibly uses
- * word memory accesses on CPU allowing cheap unaligned memory reads.
- * arrays = { byte1, byte2, byte3, byte4, byte6, byte7, pad1, pad2}
- *
- * Please note that alignment of addr1 & addr2 is only guaranted to be 16 bits.
- */
-
-static inline unsigned compare_ether_addr_64bits(const u8 addr1[6+2],
-						 const u8 addr2[6+2])
-{
-#ifdef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
-	unsigned long fold = ((*(unsigned long *)addr1) ^
-			      (*(unsigned long *)addr2));
-
-	if (sizeof(fold) == 8)
-		return zap_last_2bytes(fold) != 0;
-
-	fold |= zap_last_2bytes((*(unsigned long *)(addr1 + 4)) ^
-				(*(unsigned long *)(addr2 + 4)));
-	return fold != 0;
-#else
-	return compare_ether_addr(addr1, addr2);
-#endif
-}
-
-/**
- * is_etherdev_addr - Tell if given Ethernet address belongs to the device.
- * @dev: Pointer to a device structure
- * @addr: Pointer to a six-byte array containing the Ethernet address
- *
- * Compare passed address with all addresses of the device. Return true if the
- * address if one of the device addresses.
- *
- * Note that this function calls compare_ether_addr_64bits() so take care of
- * the right padding.
- */
-static inline bool is_etherdev_addr(const struct net_device *dev,
-				    const u8 addr[6 + 2])
-{
-	struct netdev_hw_addr *ha;
-	int res = 1;
-
-	rcu_read_lock();
-	for_each_dev_addr(dev, ha) {
-		res = compare_ether_addr_64bits(addr, ha->addr);
-		if (!res)
-			break;
-	}
-	rcu_read_unlock();
-	return !res;
-}
-#endif	/* __KERNEL__ */
-
-/**
- * compare_ether_header - Compare two Ethernet headers
- * @a: Pointer to Ethernet header
- * @b: Pointer to Ethernet header
- *
- * Compare two ethernet headers, returns 0 if equal.
- * This assumes that the network header (i.e., IP header) is 4-byte
- * aligned OR the platform can handle unaligned access.  This is the
- * case for all packets coming into netif_receive_skb or similar
- * entry points.
- */
-
-static inline unsigned long compare_ether_header(const void *a, const void *b)
-{
-#if defined(CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS) && BITS_PER_LONG == 64
-	unsigned long fold;
-
-	/*
-	 * We want to compare 14 bytes:
-	 *  [a0 ... a13] ^ [b0 ... b13]
-	 * Use two long XOR, ORed together, with an overlap of two bytes.
-	 *  [a0  a1  a2  a3  a4  a5  a6  a7 ] ^ [b0  b1  b2  b3  b4  b5  b6  b7 ] |
-	 *  [a6  a7  a8  a9  a10 a11 a12 a13] ^ [b6  b7  b8  b9  b10 b11 b12 b13]
-	 * This means the [a6 a7] ^ [b6 b7] part is done two times.
-	*/
-	fold = *(unsigned long *)a ^ *(unsigned long *)b;
-	fold |= *(unsigned long *)(a + 6) ^ *(unsigned long *)(b + 6);
-	return fold;
-#else
-	u32 *a32 = (u32 *)((u8 *)a + 2);
-	u32 *b32 = (u32 *)((u8 *)b + 2);
-
-	return (*(u16 *)a ^ *(u16 *)b) | (a32[0] ^ b32[0]) |
-	       (a32[1] ^ b32[1]) | (a32[2] ^ b32[2]);
-#endif
-}
-
-#endif	/* _LINUX_ETHERDEVICE_H */
diff --git a/ANDROID_3.4.5/include/linux/ethtool.h b/ANDROID_3.4.5/include/linux/ethtool.h
deleted file mode 100644
index f5647b59..00000000
--- a/ANDROID_3.4.5/include/linux/ethtool.h
+++ /dev/null
@@ -1,1210 +0,0 @@
-/*
- * ethtool.h: Defines for Linux ethtool.
- *
- * Copyright (C) 1998 David S. Miller (davem@redhat.com)
- * Copyright 2001 Jeff Garzik <jgarzik@pobox.com>
- * Portions Copyright 2001 Sun Microsystems (thockin@sun.com)
- * Portions Copyright 2002 Intel (eli.kupermann@intel.com,
- *                                christopher.leech@intel.com,
- *                                scott.feldman@intel.com)
- * Portions Copyright (C) Sun Microsystems 2008
- */
-
-#ifndef _LINUX_ETHTOOL_H
-#define _LINUX_ETHTOOL_H
-
-#ifdef __KERNEL__
-#include <linux/compat.h>
-#endif
-#include <linux/types.h>
-#include <linux/if_ether.h>
-
-/* This should work for both 32 and 64 bit userland. */
-struct ethtool_cmd {
-	__u32	cmd;
-	__u32	supported;	/* Features this interface supports */
-	__u32	advertising;	/* Features this interface advertises */
-	__u16	speed;	        /* The forced speed (lower bits) in
-				 * Mbps. Please use
-				 * ethtool_cmd_speed()/_set() to
-				 * access it */
-	__u8	duplex;		/* Duplex, half or full */
-	__u8	port;		/* Which connector port */
-	__u8	phy_address;	/* MDIO PHY address (PRTAD for clause 45).
-				 * May be read-only or read-write
-				 * depending on the driver.
-				 */
-	__u8	transceiver;	/* Which transceiver to use */
-	__u8	autoneg;	/* Enable or disable autonegotiation */
-	__u8	mdio_support;	/* MDIO protocols supported.  Read-only.
-				 * Not set by all drivers.
-				 */
-	__u32	maxtxpkt;	/* Tx pkts before generating tx int */
-	__u32	maxrxpkt;	/* Rx pkts before generating rx int */
-	__u16	speed_hi;       /* The forced speed (upper
-				 * bits) in Mbps. Please use
-				 * ethtool_cmd_speed()/_set() to
-				 * access it */
-	__u8	eth_tp_mdix;
-	__u8	reserved2;
-	__u32	lp_advertising;	/* Features the link partner advertises */
-	__u32	reserved[2];
-};
-
-static inline void ethtool_cmd_speed_set(struct ethtool_cmd *ep,
-					 __u32 speed)
-{
-
-	ep->speed = (__u16)speed;
-	ep->speed_hi = (__u16)(speed >> 16);
-}
-
-static inline __u32 ethtool_cmd_speed(const struct ethtool_cmd *ep)
-{
-	return (ep->speed_hi << 16) | ep->speed;
-}
-
-/* Device supports clause 22 register access to PHY or peripherals
- * using the interface defined in <linux/mii.h>.  This should not be
- * set if there are known to be no such peripherals present or if
- * the driver only emulates clause 22 registers for compatibility.
- */
-#define ETH_MDIO_SUPPORTS_C22	1
-
-/* Device supports clause 45 register access to PHY or peripherals
- * using the interface defined in <linux/mii.h> and <linux/mdio.h>.
- * This should not be set if there are known to be no such peripherals
- * present.
- */
-#define ETH_MDIO_SUPPORTS_C45	2
-
-#define ETHTOOL_FWVERS_LEN	32
-#define ETHTOOL_BUSINFO_LEN	32
-/* these strings are set to whatever the driver author decides... */
-struct ethtool_drvinfo {
-	__u32	cmd;
-	char	driver[32];	/* driver short name, "tulip", "eepro100" */
-	char	version[32];	/* driver version string */
-	char	fw_version[ETHTOOL_FWVERS_LEN];	/* firmware version string */
-	char	bus_info[ETHTOOL_BUSINFO_LEN];	/* Bus info for this IF. */
-				/* For PCI devices, use pci_name(pci_dev). */
-	char	reserved1[32];
-	char	reserved2[12];
-				/*
-				 * Some struct members below are filled in
-				 * using ops->get_sset_count().  Obtaining
-				 * this info from ethtool_drvinfo is now
-				 * deprecated; Use ETHTOOL_GSSET_INFO
-				 * instead.
-				 */
-	__u32	n_priv_flags;	/* number of flags valid in ETHTOOL_GPFLAGS */
-	__u32	n_stats;	/* number of u64's from ETHTOOL_GSTATS */
-	__u32	testinfo_len;
-	__u32	eedump_len;	/* Size of data from ETHTOOL_GEEPROM (bytes) */
-	__u32	regdump_len;	/* Size of data from ETHTOOL_GREGS (bytes) */
-};
-
-#define SOPASS_MAX	6
-/* wake-on-lan settings */
-struct ethtool_wolinfo {
-	__u32	cmd;
-	__u32	supported;
-	__u32	wolopts;
-	__u8	sopass[SOPASS_MAX]; /* SecureOn(tm) password */
-};
-
-/* for passing single values */
-struct ethtool_value {
-	__u32	cmd;
-	__u32	data;
-};
-
-/* for passing big chunks of data */
-struct ethtool_regs {
-	__u32	cmd;
-	__u32	version; /* driver-specific, indicates different chips/revs */
-	__u32	len; /* bytes */
-	__u8	data[0];
-};
-
-/* for passing EEPROM chunks */
-struct ethtool_eeprom {
-	__u32	cmd;
-	__u32	magic;
-	__u32	offset; /* in bytes */
-	__u32	len; /* in bytes */
-	__u8	data[0];
-};
-
-/**
- * struct ethtool_coalesce - coalescing parameters for IRQs and stats updates
- * @cmd: ETHTOOL_{G,S}COALESCE
- * @rx_coalesce_usecs: How many usecs to delay an RX interrupt after
- *	a packet arrives.
- * @rx_max_coalesced_frames: Maximum number of packets to receive
- *	before an RX interrupt.
- * @rx_coalesce_usecs_irq: Same as @rx_coalesce_usecs, except that
- *	this value applies while an IRQ is being serviced by the host.
- * @rx_max_coalesced_frames_irq: Same as @rx_max_coalesced_frames,
- *	except that this value applies while an IRQ is being serviced
- *	by the host.
- * @tx_coalesce_usecs: How many usecs to delay a TX interrupt after
- *	a packet is sent.
- * @tx_max_coalesced_frames: Maximum number of packets to be sent
- *	before a TX interrupt.
- * @tx_coalesce_usecs_irq: Same as @tx_coalesce_usecs, except that
- *	this value applies while an IRQ is being serviced by the host.
- * @tx_max_coalesced_frames_irq: Same as @tx_max_coalesced_frames,
- *	except that this value applies while an IRQ is being serviced
- *	by the host.
- * @stats_block_coalesce_usecs: How many usecs to delay in-memory
- *	statistics block updates.  Some drivers do not have an
- *	in-memory statistic block, and in such cases this value is
- *	ignored.  This value must not be zero.
- * @use_adaptive_rx_coalesce: Enable adaptive RX coalescing.
- * @use_adaptive_tx_coalesce: Enable adaptive TX coalescing.
- * @pkt_rate_low: Threshold for low packet rate (packets per second).
- * @rx_coalesce_usecs_low: How many usecs to delay an RX interrupt after
- *	a packet arrives, when the packet rate is below @pkt_rate_low.
- * @rx_max_coalesced_frames_low: Maximum number of packets to be received
- *	before an RX interrupt, when the packet rate is below @pkt_rate_low.
- * @tx_coalesce_usecs_low: How many usecs to delay a TX interrupt after
- *	a packet is sent, when the packet rate is below @pkt_rate_low.
- * @tx_max_coalesced_frames_low: Maximum nuumber of packets to be sent before
- *	a TX interrupt, when the packet rate is below @pkt_rate_low.
- * @pkt_rate_high: Threshold for high packet rate (packets per second).
- * @rx_coalesce_usecs_high: How many usecs to delay an RX interrupt after
- *	a packet arrives, when the packet rate is above @pkt_rate_high.
- * @rx_max_coalesced_frames_high: Maximum number of packets to be received
- *	before an RX interrupt, when the packet rate is above @pkt_rate_high.
- * @tx_coalesce_usecs_high: How many usecs to delay a TX interrupt after
- *	a packet is sent, when the packet rate is above @pkt_rate_high.
- * @tx_max_coalesced_frames_high: Maximum number of packets to be sent before
- *	a TX interrupt, when the packet rate is above @pkt_rate_high.
- * @rate_sample_interval: How often to do adaptive coalescing packet rate
- *	sampling, measured in seconds.  Must not be zero.
- *
- * Each pair of (usecs, max_frames) fields specifies this exit
- * condition for interrupt coalescing:
- *	(usecs > 0 && time_since_first_completion >= usecs) ||
- *	(max_frames > 0 && completed_frames >= max_frames)
- * It is illegal to set both usecs and max_frames to zero as this
- * would cause interrupts to never be generated.  To disable
- * coalescing, set usecs = 0 and max_frames = 1.
- *
- * Some implementations ignore the value of max_frames and use the
- * condition:
- *	time_since_first_completion >= usecs
- * This is deprecated.  Drivers for hardware that does not support
- * counting completions should validate that max_frames == !rx_usecs.
- *
- * Adaptive RX/TX coalescing is an algorithm implemented by some
- * drivers to improve latency under low packet rates and improve
- * throughput under high packet rates.  Some drivers only implement
- * one of RX or TX adaptive coalescing.  Anything not implemented by
- * the driver causes these values to be silently ignored.
- *
- * When the packet rate is below @pkt_rate_high but above
- * @pkt_rate_low (both measured in packets per second) the
- * normal {rx,tx}_* coalescing parameters are used.
- */
-struct ethtool_coalesce {
-	__u32	cmd;
-	__u32	rx_coalesce_usecs;
-	__u32	rx_max_coalesced_frames;
-	__u32	rx_coalesce_usecs_irq;
-	__u32	rx_max_coalesced_frames_irq;
-	__u32	tx_coalesce_usecs;
-	__u32	tx_max_coalesced_frames;
-	__u32	tx_coalesce_usecs_irq;
-	__u32	tx_max_coalesced_frames_irq;
-	__u32	stats_block_coalesce_usecs;
-	__u32	use_adaptive_rx_coalesce;
-	__u32	use_adaptive_tx_coalesce;
-	__u32	pkt_rate_low;
-	__u32	rx_coalesce_usecs_low;
-	__u32	rx_max_coalesced_frames_low;
-	__u32	tx_coalesce_usecs_low;
-	__u32	tx_max_coalesced_frames_low;
-	__u32	pkt_rate_high;
-	__u32	rx_coalesce_usecs_high;
-	__u32	rx_max_coalesced_frames_high;
-	__u32	tx_coalesce_usecs_high;
-	__u32	tx_max_coalesced_frames_high;
-	__u32	rate_sample_interval;
-};
-
-/* for configuring RX/TX ring parameters */
-struct ethtool_ringparam {
-	__u32	cmd;	/* ETHTOOL_{G,S}RINGPARAM */
-
-	/* Read only attributes.  These indicate the maximum number
-	 * of pending RX/TX ring entries the driver will allow the
-	 * user to set.
-	 */
-	__u32	rx_max_pending;
-	__u32	rx_mini_max_pending;
-	__u32	rx_jumbo_max_pending;
-	__u32	tx_max_pending;
-
-	/* Values changeable by the user.  The valid values are
-	 * in the range 1 to the "*_max_pending" counterpart above.
-	 */
-	__u32	rx_pending;
-	__u32	rx_mini_pending;
-	__u32	rx_jumbo_pending;
-	__u32	tx_pending;
-};
-
-/**
- * struct ethtool_channels - configuring number of network channel
- * @cmd: ETHTOOL_{G,S}CHANNELS
- * @max_rx: Read only. Maximum number of receive channel the driver support.
- * @max_tx: Read only. Maximum number of transmit channel the driver support.
- * @max_other: Read only. Maximum number of other channel the driver support.
- * @max_combined: Read only. Maximum number of combined channel the driver
- *	support. Set of queues RX, TX or other.
- * @rx_count: Valid values are in the range 1 to the max_rx.
- * @tx_count: Valid values are in the range 1 to the max_tx.
- * @other_count: Valid values are in the range 1 to the max_other.
- * @combined_count: Valid values are in the range 1 to the max_combined.
- *
- * This can be used to configure RX, TX and other channels.
- */
-
-struct ethtool_channels {
-	__u32	cmd;
-	__u32	max_rx;
-	__u32	max_tx;
-	__u32	max_other;
-	__u32	max_combined;
-	__u32	rx_count;
-	__u32	tx_count;
-	__u32	other_count;
-	__u32	combined_count;
-};
-
-/* for configuring link flow control parameters */
-struct ethtool_pauseparam {
-	__u32	cmd;	/* ETHTOOL_{G,S}PAUSEPARAM */
-
-	/* If the link is being auto-negotiated (via ethtool_cmd.autoneg
-	 * being true) the user may set 'autoneg' here non-zero to have the
-	 * pause parameters be auto-negotiated too.  In such a case, the
-	 * {rx,tx}_pause values below determine what capabilities are
-	 * advertised.
-	 *
-	 * If 'autoneg' is zero or the link is not being auto-negotiated,
-	 * then {rx,tx}_pause force the driver to use/not-use pause
-	 * flow control.
-	 */
-	__u32	autoneg;
-	__u32	rx_pause;
-	__u32	tx_pause;
-};
-
-#define ETH_GSTRING_LEN		32
-enum ethtool_stringset {
-	ETH_SS_TEST		= 0,
-	ETH_SS_STATS,
-	ETH_SS_PRIV_FLAGS,
-	ETH_SS_NTUPLE_FILTERS,	/* Do not use, GRXNTUPLE is now deprecated */
-	ETH_SS_FEATURES,
-};
-
-/* for passing string sets for data tagging */
-struct ethtool_gstrings {
-	__u32	cmd;		/* ETHTOOL_GSTRINGS */
-	__u32	string_set;	/* string set id e.c. ETH_SS_TEST, etc*/
-	__u32	len;		/* number of strings in the string set */
-	__u8	data[0];
-};
-
-struct ethtool_sset_info {
-	__u32	cmd;		/* ETHTOOL_GSSET_INFO */
-	__u32	reserved;
-	__u64	sset_mask;	/* input: each bit selects an sset to query */
-				/* output: each bit a returned sset */
-	__u32	data[0];	/* ETH_SS_xxx count, in order, based on bits
-				   in sset_mask.  One bit implies one
-				   __u32, two bits implies two
-				   __u32's, etc. */
-};
-
-/**
- * enum ethtool_test_flags - flags definition of ethtool_test
- * @ETH_TEST_FL_OFFLINE: if set perform online and offline tests, otherwise
- *	only online tests.
- * @ETH_TEST_FL_FAILED: Driver set this flag if test fails.
- * @ETH_TEST_FL_EXTERNAL_LB: Application request to perform external loopback
- *	test.
- * @ETH_TEST_FL_EXTERNAL_LB_DONE: Driver performed the external loopback test
- */
-
-enum ethtool_test_flags {
-	ETH_TEST_FL_OFFLINE	= (1 << 0),
-	ETH_TEST_FL_FAILED	= (1 << 1),
-	ETH_TEST_FL_EXTERNAL_LB	= (1 << 2),
-	ETH_TEST_FL_EXTERNAL_LB_DONE	= (1 << 3),
-};
-
-/* for requesting NIC test and getting results*/
-struct ethtool_test {
-	__u32	cmd;		/* ETHTOOL_TEST */
-	__u32	flags;		/* ETH_TEST_FL_xxx */
-	__u32	reserved;
-	__u32	len;		/* result length, in number of u64 elements */
-	__u64	data[0];
-};
-
-/* for dumping NIC-specific statistics */
-struct ethtool_stats {
-	__u32	cmd;		/* ETHTOOL_GSTATS */
-	__u32	n_stats;	/* number of u64's being returned */
-	__u64	data[0];
-};
-
-struct ethtool_perm_addr {
-	__u32	cmd;		/* ETHTOOL_GPERMADDR */
-	__u32	size;
-	__u8	data[0];
-};
-
-/* boolean flags controlling per-interface behavior characteristics.
- * When reading, the flag indicates whether or not a certain behavior
- * is enabled/present.  When writing, the flag indicates whether
- * or not the driver should turn on (set) or off (clear) a behavior.
- *
- * Some behaviors may read-only (unconditionally absent or present).
- * If such is the case, return EINVAL in the set-flags operation if the
- * flag differs from the read-only value.
- */
-enum ethtool_flags {
-	ETH_FLAG_TXVLAN		= (1 << 7),	/* TX VLAN offload enabled */
-	ETH_FLAG_RXVLAN		= (1 << 8),	/* RX VLAN offload enabled */
-	ETH_FLAG_LRO		= (1 << 15),	/* LRO is enabled */
-	ETH_FLAG_NTUPLE		= (1 << 27),	/* N-tuple filters enabled */
-	ETH_FLAG_RXHASH		= (1 << 28),
-};
-
-/* The following structures are for supporting RX network flow
- * classification and RX n-tuple configuration. Note, all multibyte
- * fields, e.g., ip4src, ip4dst, psrc, pdst, spi, etc. are expected to
- * be in network byte order.
- */
-
-/**
- * struct ethtool_tcpip4_spec - flow specification for TCP/IPv4 etc.
- * @ip4src: Source host
- * @ip4dst: Destination host
- * @psrc: Source port
- * @pdst: Destination port
- * @tos: Type-of-service
- *
- * This can be used to specify a TCP/IPv4, UDP/IPv4 or SCTP/IPv4 flow.
- */
-struct ethtool_tcpip4_spec {
-	__be32	ip4src;
-	__be32	ip4dst;
-	__be16	psrc;
-	__be16	pdst;
-	__u8    tos;
-};
-
-/**
- * struct ethtool_ah_espip4_spec - flow specification for IPsec/IPv4
- * @ip4src: Source host
- * @ip4dst: Destination host
- * @spi: Security parameters index
- * @tos: Type-of-service
- *
- * This can be used to specify an IPsec transport or tunnel over IPv4.
- */
-struct ethtool_ah_espip4_spec {
-	__be32	ip4src;
-	__be32	ip4dst;
-	__be32	spi;
-	__u8    tos;
-};
-
-#define	ETH_RX_NFC_IP4	1
-
-/**
- * struct ethtool_usrip4_spec - general flow specification for IPv4
- * @ip4src: Source host
- * @ip4dst: Destination host
- * @l4_4_bytes: First 4 bytes of transport (layer 4) header
- * @tos: Type-of-service
- * @ip_ver: Value must be %ETH_RX_NFC_IP4; mask must be 0
- * @proto: Transport protocol number; mask must be 0
- */
-struct ethtool_usrip4_spec {
-	__be32	ip4src;
-	__be32	ip4dst;
-	__be32	l4_4_bytes;
-	__u8    tos;
-	__u8    ip_ver;
-	__u8    proto;
-};
-
-union ethtool_flow_union {
-	struct ethtool_tcpip4_spec		tcp_ip4_spec;
-	struct ethtool_tcpip4_spec		udp_ip4_spec;
-	struct ethtool_tcpip4_spec		sctp_ip4_spec;
-	struct ethtool_ah_espip4_spec		ah_ip4_spec;
-	struct ethtool_ah_espip4_spec		esp_ip4_spec;
-	struct ethtool_usrip4_spec		usr_ip4_spec;
-	struct ethhdr				ether_spec;
-	__u8					hdata[60];
-};
-
-struct ethtool_flow_ext {
-	__be16	vlan_etype;
-	__be16	vlan_tci;
-	__be32	data[2];
-};
-
-/**
- * struct ethtool_rx_flow_spec - classification rule for RX flows
- * @flow_type: Type of match to perform, e.g. %TCP_V4_FLOW
- * @h_u: Flow fields to match (dependent on @flow_type)
- * @h_ext: Additional fields to match
- * @m_u: Masks for flow field bits to be matched
- * @m_ext: Masks for additional field bits to be matched
- *	Note, all additional fields must be ignored unless @flow_type
- *	includes the %FLOW_EXT flag.
- * @ring_cookie: RX ring/queue index to deliver to, or %RX_CLS_FLOW_DISC
- *	if packets should be discarded
- * @location: Location of rule in the table.  Locations must be
- *	numbered such that a flow matching multiple rules will be
- *	classified according to the first (lowest numbered) rule.
- */
-struct ethtool_rx_flow_spec {
-	__u32		flow_type;
-	union ethtool_flow_union h_u;
-	struct ethtool_flow_ext h_ext;
-	union ethtool_flow_union m_u;
-	struct ethtool_flow_ext m_ext;
-	__u64		ring_cookie;
-	__u32		location;
-};
-
-/**
- * struct ethtool_rxnfc - command to get or set RX flow classification rules
- * @cmd: Specific command number - %ETHTOOL_GRXFH, %ETHTOOL_SRXFH,
- *	%ETHTOOL_GRXRINGS, %ETHTOOL_GRXCLSRLCNT, %ETHTOOL_GRXCLSRULE,
- *	%ETHTOOL_GRXCLSRLALL, %ETHTOOL_SRXCLSRLDEL or %ETHTOOL_SRXCLSRLINS
- * @flow_type: Type of flow to be affected, e.g. %TCP_V4_FLOW
- * @data: Command-dependent value
- * @fs: Flow classification rule
- * @rule_cnt: Number of rules to be affected
- * @rule_locs: Array of used rule locations
- *
- * For %ETHTOOL_GRXFH and %ETHTOOL_SRXFH, @data is a bitmask indicating
- * the fields included in the flow hash, e.g. %RXH_IP_SRC.  The following
- * structure fields must not be used.
- *
- * For %ETHTOOL_GRXRINGS, @data is set to the number of RX rings/queues
- * on return.
- *
- * For %ETHTOOL_GRXCLSRLCNT, @rule_cnt is set to the number of defined
- * rules on return.  If @data is non-zero on return then it is the
- * size of the rule table, plus the flag %RX_CLS_LOC_SPECIAL if the
- * driver supports any special location values.  If that flag is not
- * set in @data then special location values should not be used.
- *
- * For %ETHTOOL_GRXCLSRULE, @fs.@location specifies the location of an
- * existing rule on entry and @fs contains the rule on return.
- *
- * For %ETHTOOL_GRXCLSRLALL, @rule_cnt specifies the array size of the
- * user buffer for @rule_locs on entry.  On return, @data is the size
- * of the rule table, @rule_cnt is the number of defined rules, and
- * @rule_locs contains the locations of the defined rules.  Drivers
- * must use the second parameter to get_rxnfc() instead of @rule_locs.
- *
- * For %ETHTOOL_SRXCLSRLINS, @fs specifies the rule to add or update.
- * @fs.@location either specifies the location to use or is a special
- * location value with %RX_CLS_LOC_SPECIAL flag set.  On return,
- * @fs.@location is the actual rule location.
- *
- * For %ETHTOOL_SRXCLSRLDEL, @fs.@location specifies the location of an
- * existing rule on entry.
- *
- * A driver supporting the special location values for
- * %ETHTOOL_SRXCLSRLINS may add the rule at any suitable unused
- * location, and may remove a rule at a later location (lower
- * priority) that matches exactly the same set of flows.  The special
- * values are: %RX_CLS_LOC_ANY, selecting any location;
- * %RX_CLS_LOC_FIRST, selecting the first suitable location (maximum
- * priority); and %RX_CLS_LOC_LAST, selecting the last suitable
- * location (minimum priority).  Additional special values may be
- * defined in future and drivers must return -%EINVAL for any
- * unrecognised value.
- */
-struct ethtool_rxnfc {
-	__u32				cmd;
-	__u32				flow_type;
-	__u64				data;
-	struct ethtool_rx_flow_spec	fs;
-	__u32				rule_cnt;
-	__u32				rule_locs[0];
-};
-
-#ifdef __KERNEL__
-#ifdef CONFIG_COMPAT
-
-struct compat_ethtool_rx_flow_spec {
-	u32		flow_type;
-	union ethtool_flow_union h_u;
-	struct ethtool_flow_ext h_ext;
-	union ethtool_flow_union m_u;
-	struct ethtool_flow_ext m_ext;
-	compat_u64	ring_cookie;
-	u32		location;
-};
-
-struct compat_ethtool_rxnfc {
-	u32				cmd;
-	u32				flow_type;
-	compat_u64			data;
-	struct compat_ethtool_rx_flow_spec fs;
-	u32				rule_cnt;
-	u32				rule_locs[0];
-};
-
-#endif /* CONFIG_COMPAT */
-#endif /* __KERNEL__ */
-
-/**
- * struct ethtool_rxfh_indir - command to get or set RX flow hash indirection
- * @cmd: Specific command number - %ETHTOOL_GRXFHINDIR or %ETHTOOL_SRXFHINDIR
- * @size: On entry, the array size of the user buffer, which may be zero.
- *	On return from %ETHTOOL_GRXFHINDIR, the array size of the hardware
- *	indirection table.
- * @ring_index: RX ring/queue index for each hash value
- *
- * For %ETHTOOL_GRXFHINDIR, a @size of zero means that only the size
- * should be returned.  For %ETHTOOL_SRXFHINDIR, a @size of zero means
- * the table should be reset to default values.  This last feature
- * is not supported by the original implementations.
- */
-struct ethtool_rxfh_indir {
-	__u32	cmd;
-	__u32	size;
-	__u32	ring_index[0];
-};
-
-/**
- * struct ethtool_rx_ntuple_flow_spec - specification for RX flow filter
- * @flow_type: Type of match to perform, e.g. %TCP_V4_FLOW
- * @h_u: Flow field values to match (dependent on @flow_type)
- * @m_u: Masks for flow field value bits to be ignored
- * @vlan_tag: VLAN tag to match
- * @vlan_tag_mask: Mask for VLAN tag bits to be ignored
- * @data: Driver-dependent data to match
- * @data_mask: Mask for driver-dependent data bits to be ignored
- * @action: RX ring/queue index to deliver to (non-negative) or other action
- *	(negative, e.g. %ETHTOOL_RXNTUPLE_ACTION_DROP)
- *
- * For flow types %TCP_V4_FLOW, %UDP_V4_FLOW and %SCTP_V4_FLOW, where
- * a field value and mask are both zero this is treated as if all mask
- * bits are set i.e. the field is ignored.
- */
-struct ethtool_rx_ntuple_flow_spec {
-	__u32		 flow_type;
-	union {
-		struct ethtool_tcpip4_spec		tcp_ip4_spec;
-		struct ethtool_tcpip4_spec		udp_ip4_spec;
-		struct ethtool_tcpip4_spec		sctp_ip4_spec;
-		struct ethtool_ah_espip4_spec		ah_ip4_spec;
-		struct ethtool_ah_espip4_spec		esp_ip4_spec;
-		struct ethtool_usrip4_spec		usr_ip4_spec;
-		struct ethhdr				ether_spec;
-		__u8					hdata[72];
-	} h_u, m_u;
-
-	__u16	        vlan_tag;
-	__u16	        vlan_tag_mask;
-	__u64		data;
-	__u64		data_mask;
-
-	__s32		action;
-#define ETHTOOL_RXNTUPLE_ACTION_DROP	(-1)	/* drop packet */
-#define ETHTOOL_RXNTUPLE_ACTION_CLEAR	(-2)	/* clear filter */
-};
-
-/**
- * struct ethtool_rx_ntuple - command to set or clear RX flow filter
- * @cmd: Command number - %ETHTOOL_SRXNTUPLE
- * @fs: Flow filter specification
- */
-struct ethtool_rx_ntuple {
-	__u32					cmd;
-	struct ethtool_rx_ntuple_flow_spec	fs;
-};
-
-#define ETHTOOL_FLASH_MAX_FILENAME	128
-enum ethtool_flash_op_type {
-	ETHTOOL_FLASH_ALL_REGIONS	= 0,
-};
-
-/* for passing firmware flashing related parameters */
-struct ethtool_flash {
-	__u32	cmd;
-	__u32	region;
-	char	data[ETHTOOL_FLASH_MAX_FILENAME];
-};
-
-/**
- * struct ethtool_dump - used for retrieving, setting device dump
- * @cmd: Command number - %ETHTOOL_GET_DUMP_FLAG, %ETHTOOL_GET_DUMP_DATA, or
- * 	%ETHTOOL_SET_DUMP
- * @version: FW version of the dump, filled in by driver
- * @flag: driver dependent flag for dump setting, filled in by driver during
- * 	  get and filled in by ethtool for set operation
- * @len: length of dump data, used as the length of the user buffer on entry to
- * 	 %ETHTOOL_GET_DUMP_DATA and this is returned as dump length by driver
- * 	 for %ETHTOOL_GET_DUMP_FLAG command
- * @data: data collected for get dump data operation
- */
-struct ethtool_dump {
-	__u32	cmd;
-	__u32	version;
-	__u32	flag;
-	__u32	len;
-	__u8	data[0];
-};
-
-/* for returning and changing feature sets */
-
-/**
- * struct ethtool_get_features_block - block with state of 32 features
- * @available: mask of changeable features
- * @requested: mask of features requested to be enabled if possible
- * @active: mask of currently enabled features
- * @never_changed: mask of features not changeable for any device
- */
-struct ethtool_get_features_block {
-	__u32	available;
-	__u32	requested;
-	__u32	active;
-	__u32	never_changed;
-};
-
-/**
- * struct ethtool_gfeatures - command to get state of device's features
- * @cmd: command number = %ETHTOOL_GFEATURES
- * @size: in: number of elements in the features[] array;
- *       out: number of elements in features[] needed to hold all features
- * @features: state of features
- */
-struct ethtool_gfeatures {
-	__u32	cmd;
-	__u32	size;
-	struct ethtool_get_features_block features[0];
-};
-
-/**
- * struct ethtool_set_features_block - block with request for 32 features
- * @valid: mask of features to be changed
- * @requested: values of features to be changed
- */
-struct ethtool_set_features_block {
-	__u32	valid;
-	__u32	requested;
-};
-
-/**
- * struct ethtool_sfeatures - command to request change in device's features
- * @cmd: command number = %ETHTOOL_SFEATURES
- * @size: array size of the features[] array
- * @features: feature change masks
- */
-struct ethtool_sfeatures {
-	__u32	cmd;
-	__u32	size;
-	struct ethtool_set_features_block features[0];
-};
-
-/*
- * %ETHTOOL_SFEATURES changes features present in features[].valid to the
- * values of corresponding bits in features[].requested. Bits in .requested
- * not set in .valid or not changeable are ignored.
- *
- * Returns %EINVAL when .valid contains undefined or never-changeable bits
- * or size is not equal to required number of features words (32-bit blocks).
- * Returns >= 0 if request was completed; bits set in the value mean:
- *   %ETHTOOL_F_UNSUPPORTED - there were bits set in .valid that are not
- *	changeable (not present in %ETHTOOL_GFEATURES' features[].available)
- *	those bits were ignored.
- *   %ETHTOOL_F_WISH - some or all changes requested were recorded but the
- *      resulting state of bits masked by .valid is not equal to .requested.
- *      Probably there are other device-specific constraints on some features
- *      in the set. When %ETHTOOL_F_UNSUPPORTED is set, .valid is considered
- *      here as though ignored bits were cleared.
- *   %ETHTOOL_F_COMPAT - some or all changes requested were made by calling
- *      compatibility functions. Requested offload state cannot be properly
- *      managed by kernel.
- *
- * Meaning of bits in the masks are obtained by %ETHTOOL_GSSET_INFO (number of
- * bits in the arrays - always multiple of 32) and %ETHTOOL_GSTRINGS commands
- * for ETH_SS_FEATURES string set. First entry in the table corresponds to least
- * significant bit in features[0] fields. Empty strings mark undefined features.
- */
-enum ethtool_sfeatures_retval_bits {
-	ETHTOOL_F_UNSUPPORTED__BIT,
-	ETHTOOL_F_WISH__BIT,
-	ETHTOOL_F_COMPAT__BIT,
-};
-
-#define ETHTOOL_F_UNSUPPORTED   (1 << ETHTOOL_F_UNSUPPORTED__BIT)
-#define ETHTOOL_F_WISH          (1 << ETHTOOL_F_WISH__BIT)
-#define ETHTOOL_F_COMPAT        (1 << ETHTOOL_F_COMPAT__BIT)
-
-#ifdef __KERNEL__
-
-#include <linux/rculist.h>
-
-extern int __ethtool_get_settings(struct net_device *dev,
-				  struct ethtool_cmd *cmd);
-
-/**
- * enum ethtool_phys_id_state - indicator state for physical identification
- * @ETHTOOL_ID_INACTIVE: Physical ID indicator should be deactivated
- * @ETHTOOL_ID_ACTIVE: Physical ID indicator should be activated
- * @ETHTOOL_ID_ON: LED should be turned on (used iff %ETHTOOL_ID_ACTIVE
- *	is not supported)
- * @ETHTOOL_ID_OFF: LED should be turned off (used iff %ETHTOOL_ID_ACTIVE
- *	is not supported)
- */
-enum ethtool_phys_id_state {
-	ETHTOOL_ID_INACTIVE,
-	ETHTOOL_ID_ACTIVE,
-	ETHTOOL_ID_ON,
-	ETHTOOL_ID_OFF
-};
-
-struct net_device;
-
-/* Some generic methods drivers may use in their ethtool_ops */
-u32 ethtool_op_get_link(struct net_device *dev);
-
-/**
- * ethtool_rxfh_indir_default - get default value for RX flow hash indirection
- * @index: Index in RX flow hash indirection table
- * @n_rx_rings: Number of RX rings to use
- *
- * This function provides the default policy for RX flow hash indirection.
- */
-static inline u32 ethtool_rxfh_indir_default(u32 index, u32 n_rx_rings)
-{
-	return index % n_rx_rings;
-}
-
-/**
- * struct ethtool_ops - optional netdev operations
- * @get_settings: Get various device settings including Ethernet link
- *	settings. The @cmd parameter is expected to have been cleared
- *	before get_settings is called. Returns a negative error code or
- *	zero.
- * @set_settings: Set various device settings including Ethernet link
- *	settings.  Returns a negative error code or zero.
- * @get_drvinfo: Report driver/device information.  Should only set the
- *	@driver, @version, @fw_version and @bus_info fields.  If not
- *	implemented, the @driver and @bus_info fields will be filled in
- *	according to the netdev's parent device.
- * @get_regs_len: Get buffer length required for @get_regs
- * @get_regs: Get device registers
- * @get_wol: Report whether Wake-on-Lan is enabled
- * @set_wol: Turn Wake-on-Lan on or off.  Returns a negative error code
- *	or zero.
- * @get_msglevel: Report driver message level.  This should be the value
- *	of the @msg_enable field used by netif logging functions.
- * @set_msglevel: Set driver message level
- * @nway_reset: Restart autonegotiation.  Returns a negative error code
- *	or zero.
- * @get_link: Report whether physical link is up.  Will only be called if
- *	the netdev is up.  Should usually be set to ethtool_op_get_link(),
- *	which uses netif_carrier_ok().
- * @get_eeprom: Read data from the device EEPROM.
- *	Should fill in the magic field.  Don't need to check len for zero
- *	or wraparound.  Fill in the data argument with the eeprom values
- *	from offset to offset + len.  Update len to the amount read.
- *	Returns an error or zero.
- * @set_eeprom: Write data to the device EEPROM.
- *	Should validate the magic field.  Don't need to check len for zero
- *	or wraparound.  Update len to the amount written.  Returns an error
- *	or zero.
- * @get_coalesce: Get interrupt coalescing parameters.  Returns a negative
- *	error code or zero.
- * @set_coalesce: Set interrupt coalescing parameters.  Returns a negative
- *	error code or zero.
- * @get_ringparam: Report ring sizes
- * @set_ringparam: Set ring sizes.  Returns a negative error code or zero.
- * @get_pauseparam: Report pause parameters
- * @set_pauseparam: Set pause parameters.  Returns a negative error code
- *	or zero.
- * @self_test: Run specified self-tests
- * @get_strings: Return a set of strings that describe the requested objects
- * @set_phys_id: Identify the physical devices, e.g. by flashing an LED
- *	attached to it.  The implementation may update the indicator
- *	asynchronously or synchronously, but in either case it must return
- *	quickly.  It is initially called with the argument %ETHTOOL_ID_ACTIVE,
- *	and must either activate asynchronous updates and return zero, return
- *	a negative error or return a positive frequency for synchronous
- *	indication (e.g. 1 for one on/off cycle per second).  If it returns
- *	a frequency then it will be called again at intervals with the
- *	argument %ETHTOOL_ID_ON or %ETHTOOL_ID_OFF and should set the state of
- *	the indicator accordingly.  Finally, it is called with the argument
- *	%ETHTOOL_ID_INACTIVE and must deactivate the indicator.  Returns a
- *	negative error code or zero.
- * @get_ethtool_stats: Return extended statistics about the device.
- *	This is only useful if the device maintains statistics not
- *	included in &struct rtnl_link_stats64.
- * @begin: Function to be called before any other operation.  Returns a
- *	negative error code or zero.
- * @complete: Function to be called after any other operation except
- *	@begin.  Will be called even if the other operation failed.
- * @get_priv_flags: Report driver-specific feature flags.
- * @set_priv_flags: Set driver-specific feature flags.  Returns a negative
- *	error code or zero.
- * @get_sset_count: Get number of strings that @get_strings will write.
- * @get_rxnfc: Get RX flow classification rules.  Returns a negative
- *	error code or zero.
- * @set_rxnfc: Set RX flow classification rules.  Returns a negative
- *	error code or zero.
- * @flash_device: Write a firmware image to device's flash memory.
- *	Returns a negative error code or zero.
- * @reset: Reset (part of) the device, as specified by a bitmask of
- *	flags from &enum ethtool_reset_flags.  Returns a negative
- *	error code or zero.
- * @get_rxfh_indir_size: Get the size of the RX flow hash indirection table.
- *	Returns zero if not supported for this specific device.
- * @get_rxfh_indir: Get the contents of the RX flow hash indirection table.
- *	Will not be called if @get_rxfh_indir_size returns zero.
- *	Returns a negative error code or zero.
- * @set_rxfh_indir: Set the contents of the RX flow hash indirection table.
- *	Will not be called if @get_rxfh_indir_size returns zero.
- *	Returns a negative error code or zero.
- * @get_channels: Get number of channels.
- * @set_channels: Set number of channels.  Returns a negative error code or
- *	zero.
- * @get_dump_flag: Get dump flag indicating current dump length, version,
- * 		   and flag of the device.
- * @get_dump_data: Get dump data.
- * @set_dump: Set dump specific flags to the device.
- *
- * All operations are optional (i.e. the function pointer may be set
- * to %NULL) and callers must take this into account.  Callers must
- * hold the RTNL lock.
- *
- * See the structures used by these operations for further documentation.
- *
- * See &struct net_device and &struct net_device_ops for documentation
- * of the generic netdev features interface.
- */
-struct ethtool_ops {
-	int	(*get_settings)(struct net_device *, struct ethtool_cmd *);
-	int	(*set_settings)(struct net_device *, struct ethtool_cmd *);
-	void	(*get_drvinfo)(struct net_device *, struct ethtool_drvinfo *);
-	int	(*get_regs_len)(struct net_device *);
-	void	(*get_regs)(struct net_device *, struct ethtool_regs *, void *);
-	void	(*get_wol)(struct net_device *, struct ethtool_wolinfo *);
-	int	(*set_wol)(struct net_device *, struct ethtool_wolinfo *);
-	u32	(*get_msglevel)(struct net_device *);
-	void	(*set_msglevel)(struct net_device *, u32);
-	int	(*nway_reset)(struct net_device *);
-	u32	(*get_link)(struct net_device *);
-	int	(*get_eeprom_len)(struct net_device *);
-	int	(*get_eeprom)(struct net_device *,
-			      struct ethtool_eeprom *, u8 *);
-	int	(*set_eeprom)(struct net_device *,
-			      struct ethtool_eeprom *, u8 *);
-	int	(*get_coalesce)(struct net_device *, struct ethtool_coalesce *);
-	int	(*set_coalesce)(struct net_device *, struct ethtool_coalesce *);
-	void	(*get_ringparam)(struct net_device *,
-				 struct ethtool_ringparam *);
-	int	(*set_ringparam)(struct net_device *,
-				 struct ethtool_ringparam *);
-	void	(*get_pauseparam)(struct net_device *,
-				  struct ethtool_pauseparam*);
-	int	(*set_pauseparam)(struct net_device *,
-				  struct ethtool_pauseparam*);
-	void	(*self_test)(struct net_device *, struct ethtool_test *, u64 *);
-	void	(*get_strings)(struct net_device *, u32 stringset, u8 *);
-	int	(*set_phys_id)(struct net_device *, enum ethtool_phys_id_state);
-	void	(*get_ethtool_stats)(struct net_device *,
-				     struct ethtool_stats *, u64 *);
-	int	(*begin)(struct net_device *);
-	void	(*complete)(struct net_device *);
-	u32	(*get_priv_flags)(struct net_device *);
-	int	(*set_priv_flags)(struct net_device *, u32);
-	int	(*get_sset_count)(struct net_device *, int);
-	int	(*get_rxnfc)(struct net_device *,
-			     struct ethtool_rxnfc *, u32 *rule_locs);
-	int	(*set_rxnfc)(struct net_device *, struct ethtool_rxnfc *);
-	int	(*flash_device)(struct net_device *, struct ethtool_flash *);
-	int	(*reset)(struct net_device *, u32 *);
-	u32	(*get_rxfh_indir_size)(struct net_device *);
-	int	(*get_rxfh_indir)(struct net_device *, u32 *);
-	int	(*set_rxfh_indir)(struct net_device *, const u32 *);
-	void	(*get_channels)(struct net_device *, struct ethtool_channels *);
-	int	(*set_channels)(struct net_device *, struct ethtool_channels *);
-	int	(*get_dump_flag)(struct net_device *, struct ethtool_dump *);
-	int	(*get_dump_data)(struct net_device *,
-				 struct ethtool_dump *, void *);
-	int	(*set_dump)(struct net_device *, struct ethtool_dump *);
-
-};
-#endif /* __KERNEL__ */
-
-/* CMDs currently supported */
-#define ETHTOOL_GSET		0x00000001 /* Get settings. */
-#define ETHTOOL_SSET		0x00000002 /* Set settings. */
-#define ETHTOOL_GDRVINFO	0x00000003 /* Get driver info. */
-#define ETHTOOL_GREGS		0x00000004 /* Get NIC registers. */
-#define ETHTOOL_GWOL		0x00000005 /* Get wake-on-lan options. */
-#define ETHTOOL_SWOL		0x00000006 /* Set wake-on-lan options. */
-#define ETHTOOL_GMSGLVL		0x00000007 /* Get driver message level */
-#define ETHTOOL_SMSGLVL		0x00000008 /* Set driver msg level. */
-#define ETHTOOL_NWAY_RST	0x00000009 /* Restart autonegotiation. */
-/* Get link status for host, i.e. whether the interface *and* the
- * physical port (if there is one) are up (ethtool_value). */
-#define ETHTOOL_GLINK		0x0000000a
-#define ETHTOOL_GEEPROM		0x0000000b /* Get EEPROM data */
-#define ETHTOOL_SEEPROM		0x0000000c /* Set EEPROM data. */
-#define ETHTOOL_GCOALESCE	0x0000000e /* Get coalesce config */
-#define ETHTOOL_SCOALESCE	0x0000000f /* Set coalesce config. */
-#define ETHTOOL_GRINGPARAM	0x00000010 /* Get ring parameters */
-#define ETHTOOL_SRINGPARAM	0x00000011 /* Set ring parameters. */
-#define ETHTOOL_GPAUSEPARAM	0x00000012 /* Get pause parameters */
-#define ETHTOOL_SPAUSEPARAM	0x00000013 /* Set pause parameters. */
-#define ETHTOOL_GRXCSUM		0x00000014 /* Get RX hw csum enable (ethtool_value) */
-#define ETHTOOL_SRXCSUM		0x00000015 /* Set RX hw csum enable (ethtool_value) */
-#define ETHTOOL_GTXCSUM		0x00000016 /* Get TX hw csum enable (ethtool_value) */
-#define ETHTOOL_STXCSUM		0x00000017 /* Set TX hw csum enable (ethtool_value) */
-#define ETHTOOL_GSG		0x00000018 /* Get scatter-gather enable
-					    * (ethtool_value) */
-#define ETHTOOL_SSG		0x00000019 /* Set scatter-gather enable
-					    * (ethtool_value). */
-#define ETHTOOL_TEST		0x0000001a /* execute NIC self-test. */
-#define ETHTOOL_GSTRINGS	0x0000001b /* get specified string set */
-#define ETHTOOL_PHYS_ID		0x0000001c /* identify the NIC */
-#define ETHTOOL_GSTATS		0x0000001d /* get NIC-specific statistics */
-#define ETHTOOL_GTSO		0x0000001e /* Get TSO enable (ethtool_value) */
-#define ETHTOOL_STSO		0x0000001f /* Set TSO enable (ethtool_value) */
-#define ETHTOOL_GPERMADDR	0x00000020 /* Get permanent hardware address */
-#define ETHTOOL_GUFO		0x00000021 /* Get UFO enable (ethtool_value) */
-#define ETHTOOL_SUFO		0x00000022 /* Set UFO enable (ethtool_value) */
-#define ETHTOOL_GGSO		0x00000023 /* Get GSO enable (ethtool_value) */
-#define ETHTOOL_SGSO		0x00000024 /* Set GSO enable (ethtool_value) */
-#define ETHTOOL_GFLAGS		0x00000025 /* Get flags bitmap(ethtool_value) */
-#define ETHTOOL_SFLAGS		0x00000026 /* Set flags bitmap(ethtool_value) */
-#define ETHTOOL_GPFLAGS		0x00000027 /* Get driver-private flags bitmap */
-#define ETHTOOL_SPFLAGS		0x00000028 /* Set driver-private flags bitmap */
-
-#define ETHTOOL_GRXFH		0x00000029 /* Get RX flow hash configuration */
-#define ETHTOOL_SRXFH		0x0000002a /* Set RX flow hash configuration */
-#define ETHTOOL_GGRO		0x0000002b /* Get GRO enable (ethtool_value) */
-#define ETHTOOL_SGRO		0x0000002c /* Set GRO enable (ethtool_value) */
-#define ETHTOOL_GRXRINGS	0x0000002d /* Get RX rings available for LB */
-#define ETHTOOL_GRXCLSRLCNT	0x0000002e /* Get RX class rule count */
-#define ETHTOOL_GRXCLSRULE	0x0000002f /* Get RX classification rule */
-#define ETHTOOL_GRXCLSRLALL	0x00000030 /* Get all RX classification rule */
-#define ETHTOOL_SRXCLSRLDEL	0x00000031 /* Delete RX classification rule */
-#define ETHTOOL_SRXCLSRLINS	0x00000032 /* Insert RX classification rule */
-#define ETHTOOL_FLASHDEV	0x00000033 /* Flash firmware to device */
-#define ETHTOOL_RESET		0x00000034 /* Reset hardware */
-#define ETHTOOL_SRXNTUPLE	0x00000035 /* Add an n-tuple filter to device */
-#define ETHTOOL_GRXNTUPLE	0x00000036 /* deprecated */
-#define ETHTOOL_GSSET_INFO	0x00000037 /* Get string set info */
-#define ETHTOOL_GRXFHINDIR	0x00000038 /* Get RX flow hash indir'n table */
-#define ETHTOOL_SRXFHINDIR	0x00000039 /* Set RX flow hash indir'n table */
-
-#define ETHTOOL_GFEATURES	0x0000003a /* Get device offload settings */
-#define ETHTOOL_SFEATURES	0x0000003b /* Change device offload settings */
-#define ETHTOOL_GCHANNELS	0x0000003c /* Get no of channels */
-#define ETHTOOL_SCHANNELS	0x0000003d /* Set no of channels */
-#define ETHTOOL_SET_DUMP	0x0000003e /* Set dump settings */
-#define ETHTOOL_GET_DUMP_FLAG	0x0000003f /* Get dump settings */
-#define ETHTOOL_GET_DUMP_DATA	0x00000040 /* Get dump data */
-
-/* compatibility with older code */
-#define SPARC_ETH_GSET		ETHTOOL_GSET
-#define SPARC_ETH_SSET		ETHTOOL_SSET
-
-/* Indicates what features are supported by the interface. */
-#define SUPPORTED_10baseT_Half		(1 << 0)
-#define SUPPORTED_10baseT_Full		(1 << 1)
-#define SUPPORTED_100baseT_Half		(1 << 2)
-#define SUPPORTED_100baseT_Full		(1 << 3)
-#define SUPPORTED_1000baseT_Half	(1 << 4)
-#define SUPPORTED_1000baseT_Full	(1 << 5)
-#define SUPPORTED_Autoneg		(1 << 6)
-#define SUPPORTED_TP			(1 << 7)
-#define SUPPORTED_AUI			(1 << 8)
-#define SUPPORTED_MII			(1 << 9)
-#define SUPPORTED_FIBRE			(1 << 10)
-#define SUPPORTED_BNC			(1 << 11)
-#define SUPPORTED_10000baseT_Full	(1 << 12)
-#define SUPPORTED_Pause			(1 << 13)
-#define SUPPORTED_Asym_Pause		(1 << 14)
-#define SUPPORTED_2500baseX_Full	(1 << 15)
-#define SUPPORTED_Backplane		(1 << 16)
-#define SUPPORTED_1000baseKX_Full	(1 << 17)
-#define SUPPORTED_10000baseKX4_Full	(1 << 18)
-#define SUPPORTED_10000baseKR_Full	(1 << 19)
-#define SUPPORTED_10000baseR_FEC	(1 << 20)
-#define SUPPORTED_20000baseMLD2_Full	(1 << 21)
-#define SUPPORTED_20000baseKR2_Full	(1 << 22)
-
-/* Indicates what features are advertised by the interface. */
-#define ADVERTISED_10baseT_Half		(1 << 0)
-#define ADVERTISED_10baseT_Full		(1 << 1)
-#define ADVERTISED_100baseT_Half	(1 << 2)
-#define ADVERTISED_100baseT_Full	(1 << 3)
-#define ADVERTISED_1000baseT_Half	(1 << 4)
-#define ADVERTISED_1000baseT_Full	(1 << 5)
-#define ADVERTISED_Autoneg		(1 << 6)
-#define ADVERTISED_TP			(1 << 7)
-#define ADVERTISED_AUI			(1 << 8)
-#define ADVERTISED_MII			(1 << 9)
-#define ADVERTISED_FIBRE		(1 << 10)
-#define ADVERTISED_BNC			(1 << 11)
-#define ADVERTISED_10000baseT_Full	(1 << 12)
-#define ADVERTISED_Pause		(1 << 13)
-#define ADVERTISED_Asym_Pause		(1 << 14)
-#define ADVERTISED_2500baseX_Full	(1 << 15)
-#define ADVERTISED_Backplane		(1 << 16)
-#define ADVERTISED_1000baseKX_Full	(1 << 17)
-#define ADVERTISED_10000baseKX4_Full	(1 << 18)
-#define ADVERTISED_10000baseKR_Full	(1 << 19)
-#define ADVERTISED_10000baseR_FEC	(1 << 20)
-#define ADVERTISED_20000baseMLD2_Full	(1 << 21)
-#define ADVERTISED_20000baseKR2_Full	(1 << 22)
-
-/* The following are all involved in forcing a particular link
- * mode for the device for setting things.  When getting the
- * devices settings, these indicate the current mode and whether
- * it was forced up into this mode or autonegotiated.
- */
-
-/* The forced speed, 10Mb, 100Mb, gigabit, 2.5Gb, 10GbE. */
-#define SPEED_10		10
-#define SPEED_100		100
-#define SPEED_1000		1000
-#define SPEED_2500		2500
-#define SPEED_10000		10000
-#define SPEED_UNKNOWN		-1
-
-/* Duplex, half or full. */
-#define DUPLEX_HALF		0x00
-#define DUPLEX_FULL		0x01
-#define DUPLEX_UNKNOWN		0xff
-
-/* Which connector port. */
-#define PORT_TP			0x00
-#define PORT_AUI		0x01
-#define PORT_MII		0x02
-#define PORT_FIBRE		0x03
-#define PORT_BNC		0x04
-#define PORT_DA			0x05
-#define PORT_NONE		0xef
-#define PORT_OTHER		0xff
-
-/* Which transceiver to use. */
-#define XCVR_INTERNAL		0x00
-#define XCVR_EXTERNAL		0x01
-#define XCVR_DUMMY1		0x02
-#define XCVR_DUMMY2		0x03
-#define XCVR_DUMMY3		0x04
-
-/* Enable or disable autonegotiation.  If this is set to enable,
- * the forced link modes above are completely ignored.
- */
-#define AUTONEG_DISABLE		0x00
-#define AUTONEG_ENABLE		0x01
-
-/* Mode MDI or MDI-X */
-#define ETH_TP_MDI_INVALID	0x00
-#define ETH_TP_MDI		0x01
-#define ETH_TP_MDI_X		0x02
-
-/* Wake-On-Lan options. */
-#define WAKE_PHY		(1 << 0)
-#define WAKE_UCAST		(1 << 1)
-#define WAKE_MCAST		(1 << 2)
-#define WAKE_BCAST		(1 << 3)
-#define WAKE_ARP		(1 << 4)
-#define WAKE_MAGIC		(1 << 5)
-#define WAKE_MAGICSECURE	(1 << 6) /* only meaningful if WAKE_MAGIC */
-
-/* L2-L4 network traffic flow types */
-#define	TCP_V4_FLOW	0x01	/* hash or spec (tcp_ip4_spec) */
-#define	UDP_V4_FLOW	0x02	/* hash or spec (udp_ip4_spec) */
-#define	SCTP_V4_FLOW	0x03	/* hash or spec (sctp_ip4_spec) */
-#define	AH_ESP_V4_FLOW	0x04	/* hash only */
-#define	TCP_V6_FLOW	0x05	/* hash only */
-#define	UDP_V6_FLOW	0x06	/* hash only */
-#define	SCTP_V6_FLOW	0x07	/* hash only */
-#define	AH_ESP_V6_FLOW	0x08	/* hash only */
-#define	AH_V4_FLOW	0x09	/* hash or spec (ah_ip4_spec) */
-#define	ESP_V4_FLOW	0x0a	/* hash or spec (esp_ip4_spec) */
-#define	AH_V6_FLOW	0x0b	/* hash only */
-#define	ESP_V6_FLOW	0x0c	/* hash only */
-#define	IP_USER_FLOW	0x0d	/* spec only (usr_ip4_spec) */
-#define	IPV4_FLOW	0x10	/* hash only */
-#define	IPV6_FLOW	0x11	/* hash only */
-#define	ETHER_FLOW	0x12	/* spec only (ether_spec) */
-/* Flag to enable additional fields in struct ethtool_rx_flow_spec */
-#define	FLOW_EXT	0x80000000
-
-/* L3-L4 network traffic flow hash options */
-#define	RXH_L2DA	(1 << 1)
-#define	RXH_VLAN	(1 << 2)
-#define	RXH_L3_PROTO	(1 << 3)
-#define	RXH_IP_SRC	(1 << 4)
-#define	RXH_IP_DST	(1 << 5)
-#define	RXH_L4_B_0_1	(1 << 6) /* src port in case of TCP/UDP/SCTP */
-#define	RXH_L4_B_2_3	(1 << 7) /* dst port in case of TCP/UDP/SCTP */
-#define	RXH_DISCARD	(1 << 31)
-
-#define	RX_CLS_FLOW_DISC	0xffffffffffffffffULL
-
-/* Special RX classification rule insert location values */
-#define RX_CLS_LOC_SPECIAL	0x80000000	/* flag */
-#define RX_CLS_LOC_ANY		0xffffffff
-#define RX_CLS_LOC_FIRST	0xfffffffe
-#define RX_CLS_LOC_LAST		0xfffffffd
-
-/* Reset flags */
-/* The reset() operation must clear the flags for the components which
- * were actually reset.  On successful return, the flags indicate the
- * components which were not reset, either because they do not exist
- * in the hardware or because they cannot be reset independently.  The
- * driver must never reset any components that were not requested.
- */
-enum ethtool_reset_flags {
-	/* These flags represent components dedicated to the interface
-	 * the command is addressed to.  Shift any flag left by
-	 * ETH_RESET_SHARED_SHIFT to reset a shared component of the
-	 * same type.
-	 */
-	ETH_RESET_MGMT		= 1 << 0,	/* Management processor */
-	ETH_RESET_IRQ		= 1 << 1,	/* Interrupt requester */
-	ETH_RESET_DMA		= 1 << 2,	/* DMA engine */
-	ETH_RESET_FILTER	= 1 << 3,	/* Filtering/flow direction */
-	ETH_RESET_OFFLOAD	= 1 << 4,	/* Protocol offload */
-	ETH_RESET_MAC		= 1 << 5,	/* Media access controller */
-	ETH_RESET_PHY		= 1 << 6,	/* Transceiver/PHY */
-	ETH_RESET_RAM		= 1 << 7,	/* RAM shared between
-						 * multiple components */
-
-	ETH_RESET_DEDICATED	= 0x0000ffff,	/* All components dedicated to
-						 * this interface */
-	ETH_RESET_ALL		= 0xffffffff,	/* All components used by this
-						 * interface, even if shared */
-};
-#define ETH_RESET_SHARED_SHIFT	16
-
-#endif /* _LINUX_ETHTOOL_H */
diff --git a/ANDROID_3.4.5/include/linux/eventfd.h b/ANDROID_3.4.5/include/linux/eventfd.h
deleted file mode 100644
index 91bb4f27..00000000
--- a/ANDROID_3.4.5/include/linux/eventfd.h
+++ /dev/null
@@ -1,83 +0,0 @@
-/*
- *  include/linux/eventfd.h
- *
- *  Copyright (C) 2007  Davide Libenzi <davidel@xmailserver.org>
- *
- */
-
-#ifndef _LINUX_EVENTFD_H
-#define _LINUX_EVENTFD_H
-
-#include <linux/fcntl.h>
-#include <linux/file.h>
-#include <linux/wait.h>
-
-/*
- * CAREFUL: Check include/asm-generic/fcntl.h when defining
- * new flags, since they might collide with O_* ones. We want
- * to re-use O_* flags that couldn't possibly have a meaning
- * from eventfd, in order to leave a free define-space for
- * shared O_* flags.
- */
-#define EFD_SEMAPHORE (1 << 0)
-#define EFD_CLOEXEC O_CLOEXEC
-#define EFD_NONBLOCK O_NONBLOCK
-
-#define EFD_SHARED_FCNTL_FLAGS (O_CLOEXEC | O_NONBLOCK)
-#define EFD_FLAGS_SET (EFD_SHARED_FCNTL_FLAGS | EFD_SEMAPHORE)
-
-#ifdef CONFIG_EVENTFD
-
-struct file *eventfd_file_create(unsigned int count, int flags);
-struct eventfd_ctx *eventfd_ctx_get(struct eventfd_ctx *ctx);
-void eventfd_ctx_put(struct eventfd_ctx *ctx);
-struct file *eventfd_fget(int fd);
-struct eventfd_ctx *eventfd_ctx_fdget(int fd);
-struct eventfd_ctx *eventfd_ctx_fileget(struct file *file);
-int eventfd_signal(struct eventfd_ctx *ctx, int n);
-ssize_t eventfd_ctx_read(struct eventfd_ctx *ctx, int no_wait, __u64 *cnt);
-int eventfd_ctx_remove_wait_queue(struct eventfd_ctx *ctx, wait_queue_t *wait,
-				  __u64 *cnt);
-
-#else /* CONFIG_EVENTFD */
-
-/*
- * Ugly ugly ugly error layer to support modules that uses eventfd but
- * pretend to work in !CONFIG_EVENTFD configurations. Namely, AIO.
- */
-static inline struct file *eventfd_file_create(unsigned int count, int flags)
-{
-	return ERR_PTR(-ENOSYS);
-}
-
-static inline struct eventfd_ctx *eventfd_ctx_fdget(int fd)
-{
-	return ERR_PTR(-ENOSYS);
-}
-
-static inline int eventfd_signal(struct eventfd_ctx *ctx, int n)
-{
-	return -ENOSYS;
-}
-
-static inline void eventfd_ctx_put(struct eventfd_ctx *ctx)
-{
-
-}
-
-static inline ssize_t eventfd_ctx_read(struct eventfd_ctx *ctx, int no_wait,
-				       __u64 *cnt)
-{
-	return -ENOSYS;
-}
-
-static inline int eventfd_ctx_remove_wait_queue(struct eventfd_ctx *ctx,
-						wait_queue_t *wait, __u64 *cnt)
-{
-	return -ENOSYS;
-}
-
-#endif
-
-#endif /* _LINUX_EVENTFD_H */
-
diff --git a/ANDROID_3.4.5/include/linux/eventpoll.h b/ANDROID_3.4.5/include/linux/eventpoll.h
deleted file mode 100644
index 6f8be328..00000000
--- a/ANDROID_3.4.5/include/linux/eventpoll.h
+++ /dev/null
@@ -1,121 +0,0 @@
-/*
- *  include/linux/eventpoll.h ( Efficient event polling implementation )
- *  Copyright (C) 2001,...,2006	 Davide Libenzi
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  Davide Libenzi <davidel@xmailserver.org>
- *
- */
-
-#ifndef _LINUX_EVENTPOLL_H
-#define _LINUX_EVENTPOLL_H
-
-/* For O_CLOEXEC */
-#include <linux/fcntl.h>
-#include <linux/types.h>
-
-/* Flags for epoll_create1.  */
-#define EPOLL_CLOEXEC O_CLOEXEC
-
-/* Valid opcodes to issue to sys_epoll_ctl() */
-#define EPOLL_CTL_ADD 1
-#define EPOLL_CTL_DEL 2
-#define EPOLL_CTL_MOD 3
-
-/*
- * Request the handling of system wakeup events so as to prevent system suspends
- * from happening while those events are being processed.
- *
- * Assuming neither EPOLLET nor EPOLLONESHOT is set, system suspends will not be
- * re-allowed until epoll_wait is called again after consuming the wakeup
- * event(s).
- *
- * Requires CAP_EPOLLWAKEUP
- */
-#define EPOLLWAKEUP (1 << 29)
-
-/* Set the One Shot behaviour for the target file descriptor */
-#define EPOLLONESHOT (1 << 30)
-
-/* Set the Edge Triggered behaviour for the target file descriptor */
-#define EPOLLET (1 << 31)
-
-/* 
- * On x86-64 make the 64bit structure have the same alignment as the
- * 32bit structure. This makes 32bit emulation easier.
- *
- * UML/x86_64 needs the same packing as x86_64
- */
-#ifdef __x86_64__
-#define EPOLL_PACKED __attribute__((packed))
-#else
-#define EPOLL_PACKED
-#endif
-
-struct epoll_event {
-	__u32 events;
-	__u64 data;
-} EPOLL_PACKED;
-
-#ifdef __KERNEL__
-
-/* Forward declarations to avoid compiler errors */
-struct file;
-
-
-#ifdef CONFIG_EPOLL
-
-/* Used to initialize the epoll bits inside the "struct file" */
-static inline void eventpoll_init_file(struct file *file)
-{
-	INIT_LIST_HEAD(&file->f_ep_links);
-	INIT_LIST_HEAD(&file->f_tfile_llink);
-}
-
-
-/* Used to release the epoll bits inside the "struct file" */
-void eventpoll_release_file(struct file *file);
-
-/*
- * This is called from inside fs/file_table.c:__fput() to unlink files
- * from the eventpoll interface. We need to have this facility to cleanup
- * correctly files that are closed without being removed from the eventpoll
- * interface.
- */
-static inline void eventpoll_release(struct file *file)
-{
-
-	/*
-	 * Fast check to avoid the get/release of the semaphore. Since
-	 * we're doing this outside the semaphore lock, it might return
-	 * false negatives, but we don't care. It'll help in 99.99% of cases
-	 * to avoid the semaphore lock. False positives simply cannot happen
-	 * because the file in on the way to be removed and nobody ( but
-	 * eventpoll ) has still a reference to this file.
-	 */
-	if (likely(list_empty(&file->f_ep_links)))
-		return;
-
-	/*
-	 * The file is being closed while it is still linked to an epoll
-	 * descriptor. We need to handle this by correctly unlinking it
-	 * from its containers.
-	 */
-	eventpoll_release_file(file);
-}
-
-#else
-
-static inline void eventpoll_init_file(struct file *file) {}
-static inline void eventpoll_release(struct file *file) {}
-
-#endif
-
-#endif /* #ifdef __KERNEL__ */
-
-#endif /* #ifndef _LINUX_EVENTPOLL_H */
-
diff --git a/ANDROID_3.4.5/include/linux/evm.h b/ANDROID_3.4.5/include/linux/evm.h
deleted file mode 100644
index 9fc13a76..00000000
--- a/ANDROID_3.4.5/include/linux/evm.h
+++ /dev/null
@@ -1,100 +0,0 @@
-/*
- * evm.h
- *
- * Copyright (c) 2009 IBM Corporation
- * Author: Mimi Zohar <zohar@us.ibm.com>
- */
-
-#ifndef _LINUX_EVM_H
-#define _LINUX_EVM_H
-
-#include <linux/integrity.h>
-#include <linux/xattr.h>
-
-struct integrity_iint_cache;
-
-#ifdef CONFIG_EVM
-extern enum integrity_status evm_verifyxattr(struct dentry *dentry,
-					     const char *xattr_name,
-					     void *xattr_value,
-					     size_t xattr_value_len,
-					     struct integrity_iint_cache *iint);
-extern int evm_inode_setattr(struct dentry *dentry, struct iattr *attr);
-extern void evm_inode_post_setattr(struct dentry *dentry, int ia_valid);
-extern int evm_inode_setxattr(struct dentry *dentry, const char *name,
-			      const void *value, size_t size);
-extern void evm_inode_post_setxattr(struct dentry *dentry,
-				    const char *xattr_name,
-				    const void *xattr_value,
-				    size_t xattr_value_len);
-extern int evm_inode_removexattr(struct dentry *dentry, const char *xattr_name);
-extern void evm_inode_post_removexattr(struct dentry *dentry,
-				       const char *xattr_name);
-extern int evm_inode_init_security(struct inode *inode,
-				   const struct xattr *xattr_array,
-				   struct xattr *evm);
-#ifdef CONFIG_FS_POSIX_ACL
-extern int posix_xattr_acl(const char *xattrname);
-#else
-static inline int posix_xattr_acl(const char *xattrname)
-{
-	return 0;
-}
-#endif
-#else
-#ifdef CONFIG_INTEGRITY
-static inline enum integrity_status evm_verifyxattr(struct dentry *dentry,
-						    const char *xattr_name,
-						    void *xattr_value,
-						    size_t xattr_value_len,
-					struct integrity_iint_cache *iint)
-{
-	return INTEGRITY_UNKNOWN;
-}
-#endif
-
-static inline int evm_inode_setattr(struct dentry *dentry, struct iattr *attr)
-{
-	return 0;
-}
-
-static inline void evm_inode_post_setattr(struct dentry *dentry, int ia_valid)
-{
-	return;
-}
-
-static inline int evm_inode_setxattr(struct dentry *dentry, const char *name,
-				     const void *value, size_t size)
-{
-	return 0;
-}
-
-static inline void evm_inode_post_setxattr(struct dentry *dentry,
-					   const char *xattr_name,
-					   const void *xattr_value,
-					   size_t xattr_value_len)
-{
-	return;
-}
-
-static inline int evm_inode_removexattr(struct dentry *dentry,
-					const char *xattr_name)
-{
-	return 0;
-}
-
-static inline void evm_inode_post_removexattr(struct dentry *dentry,
-					      const char *xattr_name)
-{
-	return;
-}
-
-static inline int evm_inode_init_security(struct inode *inode,
-					  const struct xattr *xattr_array,
-					  struct xattr *evm)
-{
-	return 0;
-}
-
-#endif /* CONFIG_EVM_H */
-#endif /* LINUX_EVM_H */
diff --git a/ANDROID_3.4.5/include/linux/export.h b/ANDROID_3.4.5/include/linux/export.h
deleted file mode 100644
index 696c0f48..00000000
--- a/ANDROID_3.4.5/include/linux/export.h
+++ /dev/null
@@ -1,89 +0,0 @@
-#ifndef _LINUX_EXPORT_H
-#define _LINUX_EXPORT_H
-/*
- * Export symbols from the kernel to modules.  Forked from module.h
- * to reduce the amount of pointless cruft we feed to gcc when only
- * exporting a simple symbol or two.
- *
- * If you feel the need to add #include <linux/foo.h> to this file
- * then you are doing something wrong and should go away silently.
- */
-
-/* Some toolchains use a `_' prefix for all user symbols. */
-#ifdef CONFIG_SYMBOL_PREFIX
-#define MODULE_SYMBOL_PREFIX CONFIG_SYMBOL_PREFIX
-#else
-#define MODULE_SYMBOL_PREFIX ""
-#endif
-
-struct kernel_symbol
-{
-	unsigned long value;
-	const char *name;
-};
-
-#ifdef MODULE
-extern struct module __this_module;
-#define THIS_MODULE (&__this_module)
-#else
-#define THIS_MODULE ((struct module *)0)
-#endif
-
-#ifdef CONFIG_MODULES
-
-#ifndef __GENKSYMS__
-#ifdef CONFIG_MODVERSIONS
-/* Mark the CRC weak since genksyms apparently decides not to
- * generate a checksums for some symbols */
-#define __CRC_SYMBOL(sym, sec)					\
-	extern void *__crc_##sym __attribute__((weak));		\
-	static const unsigned long __kcrctab_##sym		\
-	__used							\
-	__attribute__((section("___kcrctab" sec "+" #sym), unused))	\
-	= (unsigned long) &__crc_##sym;
-#else
-#define __CRC_SYMBOL(sym, sec)
-#endif
-
-/* For every exported symbol, place a struct in the __ksymtab section */
-#define __EXPORT_SYMBOL(sym, sec)				\
-	extern typeof(sym) sym;					\
-	__CRC_SYMBOL(sym, sec)					\
-	static const char __kstrtab_##sym[]			\
-	__attribute__((section("__ksymtab_strings"), aligned(1))) \
-	= MODULE_SYMBOL_PREFIX #sym;				\
-	static const struct kernel_symbol __ksymtab_##sym	\
-	__used							\
-	__attribute__((section("___ksymtab" sec "+" #sym), unused))	\
-	= { (unsigned long)&sym, __kstrtab_##sym }
-
-#define EXPORT_SYMBOL(sym)					\
-	__EXPORT_SYMBOL(sym, "")
-
-#define EXPORT_SYMBOL_GPL(sym)					\
-	__EXPORT_SYMBOL(sym, "_gpl")
-
-#define EXPORT_SYMBOL_GPL_FUTURE(sym)				\
-	__EXPORT_SYMBOL(sym, "_gpl_future")
-
-#ifdef CONFIG_UNUSED_SYMBOLS
-#define EXPORT_UNUSED_SYMBOL(sym) __EXPORT_SYMBOL(sym, "_unused")
-#define EXPORT_UNUSED_SYMBOL_GPL(sym) __EXPORT_SYMBOL(sym, "_unused_gpl")
-#else
-#define EXPORT_UNUSED_SYMBOL(sym)
-#define EXPORT_UNUSED_SYMBOL_GPL(sym)
-#endif
-
-#endif	/* __GENKSYMS__ */
-
-#else /* !CONFIG_MODULES... */
-
-#define EXPORT_SYMBOL(sym)
-#define EXPORT_SYMBOL_GPL(sym)
-#define EXPORT_SYMBOL_GPL_FUTURE(sym)
-#define EXPORT_UNUSED_SYMBOL(sym)
-#define EXPORT_UNUSED_SYMBOL_GPL(sym)
-
-#endif /* CONFIG_MODULES */
-
-#endif /* _LINUX_EXPORT_H */
diff --git a/ANDROID_3.4.5/include/linux/exportfs.h b/ANDROID_3.4.5/include/linux/exportfs.h
deleted file mode 100644
index 3a4cef53..00000000
--- a/ANDROID_3.4.5/include/linux/exportfs.h
+++ /dev/null
@@ -1,196 +0,0 @@
-#ifndef LINUX_EXPORTFS_H
-#define LINUX_EXPORTFS_H 1
-
-#include <linux/types.h>
-
-struct dentry;
-struct inode;
-struct super_block;
-struct vfsmount;
-
-/* limit the handle size to NFSv4 handle size now */
-#define MAX_HANDLE_SZ 128
-
-/*
- * The fileid_type identifies how the file within the filesystem is encoded.
- * In theory this is freely set and parsed by the filesystem, but we try to
- * stick to conventions so we can share some generic code and don't confuse
- * sniffers like ethereal/wireshark.
- *
- * The filesystem must not use the value '0' or '0xff'.
- */
-enum fid_type {
-	/*
-	 * The root, or export point, of the filesystem.
-	 * (Never actually passed down to the filesystem.
-	 */
-	FILEID_ROOT = 0,
-
-	/*
-	 * 32bit inode number, 32 bit generation number.
-	 */
-	FILEID_INO32_GEN = 1,
-
-	/*
-	 * 32bit inode number, 32 bit generation number,
-	 * 32 bit parent directory inode number.
-	 */
-	FILEID_INO32_GEN_PARENT = 2,
-
-	/*
-	 * 64 bit object ID, 64 bit root object ID,
-	 * 32 bit generation number.
-	 */
-	FILEID_BTRFS_WITHOUT_PARENT = 0x4d,
-
-	/*
-	 * 64 bit object ID, 64 bit root object ID,
-	 * 32 bit generation number,
-	 * 64 bit parent object ID, 32 bit parent generation.
-	 */
-	FILEID_BTRFS_WITH_PARENT = 0x4e,
-
-	/*
-	 * 64 bit object ID, 64 bit root object ID,
-	 * 32 bit generation number,
-	 * 64 bit parent object ID, 32 bit parent generation,
-	 * 64 bit parent root object ID.
-	 */
-	FILEID_BTRFS_WITH_PARENT_ROOT = 0x4f,
-
-	/*
-	 * 32 bit block number, 16 bit partition reference,
-	 * 16 bit unused, 32 bit generation number.
-	 */
-	FILEID_UDF_WITHOUT_PARENT = 0x51,
-
-	/*
-	 * 32 bit block number, 16 bit partition reference,
-	 * 16 bit unused, 32 bit generation number,
-	 * 32 bit parent block number, 32 bit parent generation number
-	 */
-	FILEID_UDF_WITH_PARENT = 0x52,
-
-	/*
-	 * 64 bit checkpoint number, 64 bit inode number,
-	 * 32 bit generation number.
-	 */
-	FILEID_NILFS_WITHOUT_PARENT = 0x61,
-
-	/*
-	 * 64 bit checkpoint number, 64 bit inode number,
-	 * 32 bit generation number, 32 bit parent generation.
-	 * 64 bit parent inode number.
-	 */
-	FILEID_NILFS_WITH_PARENT = 0x62,
-};
-
-struct fid {
-	union {
-		struct {
-			u32 ino;
-			u32 gen;
-			u32 parent_ino;
-			u32 parent_gen;
-		} i32;
- 		struct {
- 			u32 block;
- 			u16 partref;
- 			u16 parent_partref;
- 			u32 generation;
- 			u32 parent_block;
- 			u32 parent_generation;
- 		} udf;
-		__u32 raw[0];
-	};
-};
-
-/**
- * struct export_operations - for nfsd to communicate with file systems
- * @encode_fh:      encode a file handle fragment from a dentry
- * @fh_to_dentry:   find the implied object and get a dentry for it
- * @fh_to_parent:   find the implied object's parent and get a dentry for it
- * @get_name:       find the name for a given inode in a given directory
- * @get_parent:     find the parent of a given directory
- * @commit_metadata: commit metadata changes to stable storage
- *
- * See Documentation/filesystems/nfs/Exporting for details on how to use
- * this interface correctly.
- *
- * encode_fh:
- *    @encode_fh should store in the file handle fragment @fh (using at most
- *    @max_len bytes) information that can be used by @decode_fh to recover the
- *    file referred to by the &struct dentry @de.  If the @connectable flag is
- *    set, the encode_fh() should store sufficient information so that a good
- *    attempt can be made to find not only the file but also it's place in the
- *    filesystem.   This typically means storing a reference to de->d_parent in
- *    the filehandle fragment.  encode_fh() should return the fileid_type on
- *    success and on error returns 255 (if the space needed to encode fh is
- *    greater than @max_len*4 bytes). On error @max_len contains the minimum
- *    size(in 4 byte unit) needed to encode the file handle.
- *
- * fh_to_dentry:
- *    @fh_to_dentry is given a &struct super_block (@sb) and a file handle
- *    fragment (@fh, @fh_len). It should return a &struct dentry which refers
- *    to the same file that the file handle fragment refers to.  If it cannot,
- *    it should return a %NULL pointer if the file was found but no acceptable
- *    &dentries were available, or an %ERR_PTR error code indicating why it
- *    couldn't be found (e.g. %ENOENT or %ENOMEM).  Any suitable dentry can be
- *    returned including, if necessary, a new dentry created with d_alloc_root.
- *    The caller can then find any other extant dentries by following the
- *    d_alias links.
- *
- * fh_to_parent:
- *    Same as @fh_to_dentry, except that it returns a pointer to the parent
- *    dentry if it was encoded into the filehandle fragment by @encode_fh.
- *
- * get_name:
- *    @get_name should find a name for the given @child in the given @parent
- *    directory.  The name should be stored in the @name (with the
- *    understanding that it is already pointing to a a %NAME_MAX+1 sized
- *    buffer.   get_name() should return %0 on success, a negative error code
- *    or error.  @get_name will be called without @parent->i_mutex held.
- *
- * get_parent:
- *    @get_parent should find the parent directory for the given @child which
- *    is also a directory.  In the event that it cannot be found, or storage
- *    space cannot be allocated, a %ERR_PTR should be returned.
- *
- * commit_metadata:
- *    @commit_metadata should commit metadata changes to stable storage.
- *
- * Locking rules:
- *    get_parent is called with child->d_inode->i_mutex down
- *    get_name is not (which is possibly inconsistent)
- */
-
-struct export_operations {
-	int (*encode_fh)(struct dentry *de, __u32 *fh, int *max_len,
-			int connectable);
-	struct dentry * (*fh_to_dentry)(struct super_block *sb, struct fid *fid,
-			int fh_len, int fh_type);
-	struct dentry * (*fh_to_parent)(struct super_block *sb, struct fid *fid,
-			int fh_len, int fh_type);
-	int (*get_name)(struct dentry *parent, char *name,
-			struct dentry *child);
-	struct dentry * (*get_parent)(struct dentry *child);
-	int (*commit_metadata)(struct inode *inode);
-};
-
-extern int exportfs_encode_fh(struct dentry *dentry, struct fid *fid,
-	int *max_len, int connectable);
-extern struct dentry *exportfs_decode_fh(struct vfsmount *mnt, struct fid *fid,
-	int fh_len, int fileid_type, int (*acceptable)(void *, struct dentry *),
-	void *context);
-
-/*
- * Generic helpers for filesystems.
- */
-extern struct dentry *generic_fh_to_dentry(struct super_block *sb,
-	struct fid *fid, int fh_len, int fh_type,
-	struct inode *(*get_inode) (struct super_block *sb, u64 ino, u32 gen));
-extern struct dentry *generic_fh_to_parent(struct super_block *sb,
-	struct fid *fid, int fh_len, int fh_type,
-	struct inode *(*get_inode) (struct super_block *sb, u64 ino, u32 gen));
-
-#endif /* LINUX_EXPORTFS_H */
diff --git a/ANDROID_3.4.5/include/linux/ext2_fs.h b/ANDROID_3.4.5/include/linux/ext2_fs.h
deleted file mode 100644
index 2723e715..00000000
--- a/ANDROID_3.4.5/include/linux/ext2_fs.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- *  linux/include/linux/ext2_fs.h
- *
- * Copyright (C) 1992, 1993, 1994, 1995
- * Remy Card (card@masi.ibp.fr)
- * Laboratoire MASI - Institut Blaise Pascal
- * Universite Pierre et Marie Curie (Paris VI)
- *
- *  from
- *
- *  linux/include/linux/minix_fs.h
- *
- *  Copyright (C) 1991, 1992  Linus Torvalds
- */
-
-#ifndef _LINUX_EXT2_FS_H
-#define _LINUX_EXT2_FS_H
-
-#include <linux/types.h>
-#include <linux/magic.h>
-
-#define EXT2_NAME_LEN 255
-
-/*
- * Maximal count of links to a file
- */
-#define EXT2_LINK_MAX		32000
-
-#define EXT2_SB_MAGIC_OFFSET	0x38
-#define EXT2_SB_BLOCKS_OFFSET	0x04
-#define EXT2_SB_BSIZE_OFFSET	0x18
-
-static inline u64 ext2_image_size(void *ext2_sb)
-{
-	__u8 *p = ext2_sb;
-	if (*(__le16 *)(p + EXT2_SB_MAGIC_OFFSET) != cpu_to_le16(EXT2_SUPER_MAGIC))
-		return 0;
-	return (u64)le32_to_cpup((__le32 *)(p + EXT2_SB_BLOCKS_OFFSET)) <<
-		le32_to_cpup((__le32 *)(p + EXT2_SB_BSIZE_OFFSET));
-}
-
-#endif	/* _LINUX_EXT2_FS_H */
diff --git a/ANDROID_3.4.5/include/linux/f75375s.h b/ANDROID_3.4.5/include/linux/f75375s.h
deleted file mode 100644
index e99e2250..00000000
--- a/ANDROID_3.4.5/include/linux/f75375s.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * f75375s.h - platform data structure for f75375s sensor
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2007, Riku Voipio <riku.voipio@iki.fi>
- */
-
-#ifndef __LINUX_F75375S_H
-#define __LINUX_F75375S_H
-
-/* We want to set fans spinning on systems where there is no
- * BIOS to do that for us */
-struct f75375s_platform_data {
-	u8 pwm[2];
-	u8 pwm_enable[2];
-};
-
-#endif /* __LINUX_F75375S_H */
diff --git a/ANDROID_3.4.5/include/linux/fadvise.h b/ANDROID_3.4.5/include/linux/fadvise.h
deleted file mode 100644
index e8e74713..00000000
--- a/ANDROID_3.4.5/include/linux/fadvise.h
+++ /dev/null
@@ -1,21 +0,0 @@
-#ifndef FADVISE_H_INCLUDED
-#define FADVISE_H_INCLUDED
-
-#define POSIX_FADV_NORMAL	0 /* No further special treatment.  */
-#define POSIX_FADV_RANDOM	1 /* Expect random page references.  */
-#define POSIX_FADV_SEQUENTIAL	2 /* Expect sequential page references.  */
-#define POSIX_FADV_WILLNEED	3 /* Will need these pages.  */
-
-/*
- * The advise values for POSIX_FADV_DONTNEED and POSIX_ADV_NOREUSE
- * for s390-64 differ from the values for the rest of the world.
- */
-#if defined(__s390x__)
-#define POSIX_FADV_DONTNEED	6 /* Don't need these pages.  */
-#define POSIX_FADV_NOREUSE	7 /* Data will be accessed once.  */
-#else
-#define POSIX_FADV_DONTNEED	4 /* Don't need these pages.  */
-#define POSIX_FADV_NOREUSE	5 /* Data will be accessed once.  */
-#endif
-
-#endif	/* FADVISE_H_INCLUDED */
diff --git a/ANDROID_3.4.5/include/linux/falloc.h b/ANDROID_3.4.5/include/linux/falloc.h
deleted file mode 100644
index 73e0b628..00000000
--- a/ANDROID_3.4.5/include/linux/falloc.h
+++ /dev/null
@@ -1,28 +0,0 @@
-#ifndef _FALLOC_H_
-#define _FALLOC_H_
-
-#define FALLOC_FL_KEEP_SIZE	0x01 /* default is extend size */
-#define FALLOC_FL_PUNCH_HOLE	0x02 /* de-allocates range */
-
-#ifdef __KERNEL__
-
-/*
- * Space reservation ioctls and argument structure
- * are designed to be compatible with the legacy XFS ioctls.
- */
-struct space_resv {
-	__s16		l_type;
-	__s16		l_whence;
-	__s64		l_start;
-	__s64		l_len;		/* len == 0 means until end of file */
-	__s32		l_sysid;
-	__u32		l_pid;
-	__s32		l_pad[4];	/* reserved area */
-};
-
-#define FS_IOC_RESVSP		_IOW('X', 40, struct space_resv)
-#define FS_IOC_RESVSP64		_IOW('X', 42, struct space_resv)
-
-#endif /* __KERNEL__ */
-
-#endif /* _FALLOC_H_ */
diff --git a/ANDROID_3.4.5/include/linux/fanotify.h b/ANDROID_3.4.5/include/linux/fanotify.h
deleted file mode 100644
index 6c6133f7..00000000
--- a/ANDROID_3.4.5/include/linux/fanotify.h
+++ /dev/null
@@ -1,120 +0,0 @@
-#ifndef _LINUX_FANOTIFY_H
-#define _LINUX_FANOTIFY_H
-
-#include <linux/types.h>
-
-/* the following events that user-space can register for */
-#define FAN_ACCESS		0x00000001	/* File was accessed */
-#define FAN_MODIFY		0x00000002	/* File was modified */
-#define FAN_CLOSE_WRITE		0x00000008	/* Writtable file closed */
-#define FAN_CLOSE_NOWRITE	0x00000010	/* Unwrittable file closed */
-#define FAN_OPEN		0x00000020	/* File was opened */
-
-#define FAN_Q_OVERFLOW		0x00004000	/* Event queued overflowed */
-
-#define FAN_OPEN_PERM		0x00010000	/* File open in perm check */
-#define FAN_ACCESS_PERM		0x00020000	/* File accessed in perm check */
-
-#define FAN_ONDIR		0x40000000	/* event occurred against dir */
-
-#define FAN_EVENT_ON_CHILD	0x08000000	/* interested in child events */
-
-/* helper events */
-#define FAN_CLOSE		(FAN_CLOSE_WRITE | FAN_CLOSE_NOWRITE) /* close */
-
-/* flags used for fanotify_init() */
-#define FAN_CLOEXEC		0x00000001
-#define FAN_NONBLOCK		0x00000002
-
-/* These are NOT bitwise flags.  Both bits are used togther.  */
-#define FAN_CLASS_NOTIF		0x00000000
-#define FAN_CLASS_CONTENT	0x00000004
-#define FAN_CLASS_PRE_CONTENT	0x00000008
-#define FAN_ALL_CLASS_BITS	(FAN_CLASS_NOTIF | FAN_CLASS_CONTENT | \
-				 FAN_CLASS_PRE_CONTENT)
-
-#define FAN_UNLIMITED_QUEUE	0x00000010
-#define FAN_UNLIMITED_MARKS	0x00000020
-
-#define FAN_ALL_INIT_FLAGS	(FAN_CLOEXEC | FAN_NONBLOCK | \
-				 FAN_ALL_CLASS_BITS | FAN_UNLIMITED_QUEUE |\
-				 FAN_UNLIMITED_MARKS)
-
-/* flags used for fanotify_modify_mark() */
-#define FAN_MARK_ADD		0x00000001
-#define FAN_MARK_REMOVE		0x00000002
-#define FAN_MARK_DONT_FOLLOW	0x00000004
-#define FAN_MARK_ONLYDIR	0x00000008
-#define FAN_MARK_MOUNT		0x00000010
-#define FAN_MARK_IGNORED_MASK	0x00000020
-#define FAN_MARK_IGNORED_SURV_MODIFY	0x00000040
-#define FAN_MARK_FLUSH		0x00000080
-#ifdef __KERNEL__
-/* not valid from userspace, only kernel internal */
-#define FAN_MARK_ONDIR		0x00000100
-#endif
-
-#define FAN_ALL_MARK_FLAGS	(FAN_MARK_ADD |\
-				 FAN_MARK_REMOVE |\
-				 FAN_MARK_DONT_FOLLOW |\
-				 FAN_MARK_ONLYDIR |\
-				 FAN_MARK_MOUNT |\
-				 FAN_MARK_IGNORED_MASK |\
-				 FAN_MARK_IGNORED_SURV_MODIFY |\
-				 FAN_MARK_FLUSH)
-
-/*
- * All of the events - we build the list by hand so that we can add flags in
- * the future and not break backward compatibility.  Apps will get only the
- * events that they originally wanted.  Be sure to add new events here!
- */
-#define FAN_ALL_EVENTS (FAN_ACCESS |\
-			FAN_MODIFY |\
-			FAN_CLOSE |\
-			FAN_OPEN)
-
-/*
- * All events which require a permission response from userspace
- */
-#define FAN_ALL_PERM_EVENTS (FAN_OPEN_PERM |\
-			     FAN_ACCESS_PERM)
-
-#define FAN_ALL_OUTGOING_EVENTS	(FAN_ALL_EVENTS |\
-				 FAN_ALL_PERM_EVENTS |\
-				 FAN_Q_OVERFLOW)
-
-#define FANOTIFY_METADATA_VERSION	3
-
-struct fanotify_event_metadata {
-	__u32 event_len;
-	__u8 vers;
-	__u8 reserved;
-	__u16 metadata_len;
-	__aligned_u64 mask;
-	__s32 fd;
-	__s32 pid;
-};
-
-struct fanotify_response {
-	__s32 fd;
-	__u32 response;
-};
-
-/* Legit userspace responses to a _PERM event */
-#define FAN_ALLOW	0x01
-#define FAN_DENY	0x02
-/* No fd set in event */
-#define FAN_NOFD	-1
-
-/* Helper functions to deal with fanotify_event_metadata buffers */
-#define FAN_EVENT_METADATA_LEN (sizeof(struct fanotify_event_metadata))
-
-#define FAN_EVENT_NEXT(meta, len) ((len) -= (meta)->event_len, \
-				   (struct fanotify_event_metadata*)(((char *)(meta)) + \
-				   (meta)->event_len))
-
-#define FAN_EVENT_OK(meta, len)	((long)(len) >= (long)FAN_EVENT_METADATA_LEN && \
-				(long)(meta)->event_len >= (long)FAN_EVENT_METADATA_LEN && \
-				(long)(meta)->event_len <= (long)(len))
-
-#endif /* _LINUX_FANOTIFY_H */
diff --git a/ANDROID_3.4.5/include/linux/fault-inject.h b/ANDROID_3.4.5/include/linux/fault-inject.h
deleted file mode 100644
index c6f996f2..00000000
--- a/ANDROID_3.4.5/include/linux/fault-inject.h
+++ /dev/null
@@ -1,69 +0,0 @@
-#ifndef _LINUX_FAULT_INJECT_H
-#define _LINUX_FAULT_INJECT_H
-
-#ifdef CONFIG_FAULT_INJECTION
-
-#include <linux/types.h>
-#include <linux/debugfs.h>
-#include <linux/atomic.h>
-
-/*
- * For explanation of the elements of this struct, see
- * Documentation/fault-injection/fault-injection.txt
- */
-struct fault_attr {
-	unsigned long probability;
-	unsigned long interval;
-	atomic_t times;
-	atomic_t space;
-	unsigned long verbose;
-	u32 task_filter;
-	unsigned long stacktrace_depth;
-	unsigned long require_start;
-	unsigned long require_end;
-	unsigned long reject_start;
-	unsigned long reject_end;
-
-	unsigned long count;
-};
-
-#define FAULT_ATTR_INITIALIZER {				\
-		.interval = 1,					\
-		.times = ATOMIC_INIT(1),			\
-		.require_end = ULONG_MAX,			\
-		.stacktrace_depth = 32,				\
-		.verbose = 2,					\
-	}
-
-#define DECLARE_FAULT_ATTR(name) struct fault_attr name = FAULT_ATTR_INITIALIZER
-int setup_fault_attr(struct fault_attr *attr, char *str);
-bool should_fail(struct fault_attr *attr, ssize_t size);
-
-#ifdef CONFIG_FAULT_INJECTION_DEBUG_FS
-
-struct dentry *fault_create_debugfs_attr(const char *name,
-			struct dentry *parent, struct fault_attr *attr);
-
-#else /* CONFIG_FAULT_INJECTION_DEBUG_FS */
-
-static inline struct dentry *fault_create_debugfs_attr(const char *name,
-			struct dentry *parent, struct fault_attr *attr)
-{
-	return ERR_PTR(-ENODEV);
-}
-
-#endif /* CONFIG_FAULT_INJECTION_DEBUG_FS */
-
-#endif /* CONFIG_FAULT_INJECTION */
-
-#ifdef CONFIG_FAILSLAB
-extern bool should_failslab(size_t size, gfp_t gfpflags, unsigned long flags);
-#else
-static inline bool should_failslab(size_t size, gfp_t gfpflags,
-				unsigned long flags)
-{
-	return false;
-}
-#endif /* CONFIG_FAILSLAB */
-
-#endif /* _LINUX_FAULT_INJECT_H */
diff --git a/ANDROID_3.4.5/include/linux/fb.h b/ANDROID_3.4.5/include/linux/fb.h
deleted file mode 100644
index d31cb682..00000000
--- a/ANDROID_3.4.5/include/linux/fb.h
+++ /dev/null
@@ -1,1181 +0,0 @@
-#ifndef _LINUX_FB_H
-#define _LINUX_FB_H
-
-#include <linux/types.h>
-#include <linux/i2c.h>
-#ifdef __KERNEL__
-#include <linux/kgdb.h>
-#endif /* __KERNEL__ */
-
-/* Definitions of frame buffers						*/
-
-#define FB_MAX			32	/* sufficient for now */
-
-/* ioctls
-   0x46 is 'F'								*/
-#define FBIOGET_VSCREENINFO	0x4600
-#define FBIOPUT_VSCREENINFO	0x4601
-#define FBIOGET_FSCREENINFO	0x4602
-#define FBIOGETCMAP		0x4604
-#define FBIOPUTCMAP		0x4605
-#define FBIOPAN_DISPLAY		0x4606
-#ifdef __KERNEL__
-#define FBIO_CURSOR            _IOWR('F', 0x08, struct fb_cursor_user)
-#else
-#define FBIO_CURSOR            _IOWR('F', 0x08, struct fb_cursor)
-#endif
-/* 0x4607-0x460B are defined below */
-/* #define FBIOGET_MONITORSPEC	0x460C */
-/* #define FBIOPUT_MONITORSPEC	0x460D */
-/* #define FBIOSWITCH_MONIBIT	0x460E */
-#define FBIOGET_CON2FBMAP	0x460F
-#define FBIOPUT_CON2FBMAP	0x4610
-#define FBIOBLANK		0x4611		/* arg: 0 or vesa level + 1 */
-#define FBIOGET_VBLANK		_IOR('F', 0x12, struct fb_vblank)
-#define FBIO_ALLOC              0x4613
-#define FBIO_FREE               0x4614
-#define FBIOGET_GLYPH           0x4615
-#define FBIOGET_HWCINFO         0x4616
-#define FBIOPUT_MODEINFO        0x4617
-#define FBIOGET_DISPINFO        0x4618
-#define FBIO_WAITFORVSYNC	_IOW('F', 0x20, __u32)
-
-#define FB_TYPE_PACKED_PIXELS		0	/* Packed Pixels	*/
-#define FB_TYPE_PLANES			1	/* Non interleaved planes */
-#define FB_TYPE_INTERLEAVED_PLANES	2	/* Interleaved planes	*/
-#define FB_TYPE_TEXT			3	/* Text/attributes	*/
-#define FB_TYPE_VGA_PLANES		4	/* EGA/VGA planes	*/
-#define FB_TYPE_FOURCC			5	/* Type identified by a V4L2 FOURCC */
-
-#define FB_AUX_TEXT_MDA		0	/* Monochrome text */
-#define FB_AUX_TEXT_CGA		1	/* CGA/EGA/VGA Color text */
-#define FB_AUX_TEXT_S3_MMIO	2	/* S3 MMIO fasttext */
-#define FB_AUX_TEXT_MGA_STEP16	3	/* MGA Millenium I: text, attr, 14 reserved bytes */
-#define FB_AUX_TEXT_MGA_STEP8	4	/* other MGAs:      text, attr,  6 reserved bytes */
-#define FB_AUX_TEXT_SVGA_GROUP	8	/* 8-15: SVGA tileblit compatible modes */
-#define FB_AUX_TEXT_SVGA_MASK	7	/* lower three bits says step */
-#define FB_AUX_TEXT_SVGA_STEP2	8	/* SVGA text mode:  text, attr */
-#define FB_AUX_TEXT_SVGA_STEP4	9	/* SVGA text mode:  text, attr,  2 reserved bytes */
-#define FB_AUX_TEXT_SVGA_STEP8	10	/* SVGA text mode:  text, attr,  6 reserved bytes */
-#define FB_AUX_TEXT_SVGA_STEP16	11	/* SVGA text mode:  text, attr, 14 reserved bytes */
-#define FB_AUX_TEXT_SVGA_LAST	15	/* reserved up to 15 */
-
-#define FB_AUX_VGA_PLANES_VGA4		0	/* 16 color planes (EGA/VGA) */
-#define FB_AUX_VGA_PLANES_CFB4		1	/* CFB4 in planes (VGA) */
-#define FB_AUX_VGA_PLANES_CFB8		2	/* CFB8 in planes (VGA) */
-
-#define FB_VISUAL_MONO01		0	/* Monochr. 1=Black 0=White */
-#define FB_VISUAL_MONO10		1	/* Monochr. 1=White 0=Black */
-#define FB_VISUAL_TRUECOLOR		2	/* True color	*/
-#define FB_VISUAL_PSEUDOCOLOR		3	/* Pseudo color (like atari) */
-#define FB_VISUAL_DIRECTCOLOR		4	/* Direct color */
-#define FB_VISUAL_STATIC_PSEUDOCOLOR	5	/* Pseudo color readonly */
-#define FB_VISUAL_FOURCC		6	/* Visual identified by a V4L2 FOURCC */
-
-#define FB_ACCEL_NONE		0	/* no hardware accelerator	*/
-#define FB_ACCEL_ATARIBLITT	1	/* Atari Blitter		*/
-#define FB_ACCEL_AMIGABLITT	2	/* Amiga Blitter                */
-#define FB_ACCEL_S3_TRIO64	3	/* Cybervision64 (S3 Trio64)    */
-#define FB_ACCEL_NCR_77C32BLT	4	/* RetinaZ3 (NCR 77C32BLT)      */
-#define FB_ACCEL_S3_VIRGE	5	/* Cybervision64/3D (S3 ViRGE)	*/
-#define FB_ACCEL_ATI_MACH64GX	6	/* ATI Mach 64GX family		*/
-#define FB_ACCEL_DEC_TGA	7	/* DEC 21030 TGA		*/
-#define FB_ACCEL_ATI_MACH64CT	8	/* ATI Mach 64CT family		*/
-#define FB_ACCEL_ATI_MACH64VT	9	/* ATI Mach 64CT family VT class */
-#define FB_ACCEL_ATI_MACH64GT	10	/* ATI Mach 64CT family GT class */
-#define FB_ACCEL_SUN_CREATOR	11	/* Sun Creator/Creator3D	*/
-#define FB_ACCEL_SUN_CGSIX	12	/* Sun cg6			*/
-#define FB_ACCEL_SUN_LEO	13	/* Sun leo/zx			*/
-#define FB_ACCEL_IMS_TWINTURBO	14	/* IMS Twin Turbo		*/
-#define FB_ACCEL_3DLABS_PERMEDIA2 15	/* 3Dlabs Permedia 2		*/
-#define FB_ACCEL_MATROX_MGA2064W 16	/* Matrox MGA2064W (Millenium)	*/
-#define FB_ACCEL_MATROX_MGA1064SG 17	/* Matrox MGA1064SG (Mystique)	*/
-#define FB_ACCEL_MATROX_MGA2164W 18	/* Matrox MGA2164W (Millenium II) */
-#define FB_ACCEL_MATROX_MGA2164W_AGP 19	/* Matrox MGA2164W (Millenium II) */
-#define FB_ACCEL_MATROX_MGAG100	20	/* Matrox G100 (Productiva G100) */
-#define FB_ACCEL_MATROX_MGAG200	21	/* Matrox G200 (Myst, Mill, ...) */
-#define FB_ACCEL_SUN_CG14	22	/* Sun cgfourteen		 */
-#define FB_ACCEL_SUN_BWTWO	23	/* Sun bwtwo			*/
-#define FB_ACCEL_SUN_CGTHREE	24	/* Sun cgthree			*/
-#define FB_ACCEL_SUN_TCX	25	/* Sun tcx			*/
-#define FB_ACCEL_MATROX_MGAG400	26	/* Matrox G400			*/
-#define FB_ACCEL_NV3		27	/* nVidia RIVA 128              */
-#define FB_ACCEL_NV4		28	/* nVidia RIVA TNT		*/
-#define FB_ACCEL_NV5		29	/* nVidia RIVA TNT2		*/
-#define FB_ACCEL_CT_6555x	30	/* C&T 6555x			*/
-#define FB_ACCEL_3DFX_BANSHEE	31	/* 3Dfx Banshee			*/
-#define FB_ACCEL_ATI_RAGE128	32	/* ATI Rage128 family		*/
-#define FB_ACCEL_IGS_CYBER2000	33	/* CyberPro 2000		*/
-#define FB_ACCEL_IGS_CYBER2010	34	/* CyberPro 2010		*/
-#define FB_ACCEL_IGS_CYBER5000	35	/* CyberPro 5000		*/
-#define FB_ACCEL_SIS_GLAMOUR    36	/* SiS 300/630/540              */
-#define FB_ACCEL_3DLABS_PERMEDIA3 37	/* 3Dlabs Permedia 3		*/
-#define FB_ACCEL_ATI_RADEON	38	/* ATI Radeon family		*/
-#define FB_ACCEL_I810           39      /* Intel 810/815                */
-#define FB_ACCEL_SIS_GLAMOUR_2  40	/* SiS 315, 650, 740		*/
-#define FB_ACCEL_SIS_XABRE      41	/* SiS 330 ("Xabre")		*/
-#define FB_ACCEL_I830           42      /* Intel 830M/845G/85x/865G     */
-#define FB_ACCEL_NV_10          43      /* nVidia Arch 10               */
-#define FB_ACCEL_NV_20          44      /* nVidia Arch 20               */
-#define FB_ACCEL_NV_30          45      /* nVidia Arch 30               */
-#define FB_ACCEL_NV_40          46      /* nVidia Arch 40               */
-#define FB_ACCEL_XGI_VOLARI_V	47	/* XGI Volari V3XT, V5, V8      */
-#define FB_ACCEL_XGI_VOLARI_Z	48	/* XGI Volari Z7                */
-#define FB_ACCEL_OMAP1610	49	/* TI OMAP16xx                  */
-#define FB_ACCEL_TRIDENT_TGUI	50	/* Trident TGUI			*/
-#define FB_ACCEL_TRIDENT_3DIMAGE 51	/* Trident 3DImage		*/
-#define FB_ACCEL_TRIDENT_BLADE3D 52	/* Trident Blade3D		*/
-#define FB_ACCEL_TRIDENT_BLADEXP 53	/* Trident BladeXP		*/
-#define FB_ACCEL_CIRRUS_ALPINE   53	/* Cirrus Logic 543x/544x/5480	*/
-#define FB_ACCEL_NEOMAGIC_NM2070 90	/* NeoMagic NM2070              */
-#define FB_ACCEL_NEOMAGIC_NM2090 91	/* NeoMagic NM2090              */
-#define FB_ACCEL_NEOMAGIC_NM2093 92	/* NeoMagic NM2093              */
-#define FB_ACCEL_NEOMAGIC_NM2097 93	/* NeoMagic NM2097              */
-#define FB_ACCEL_NEOMAGIC_NM2160 94	/* NeoMagic NM2160              */
-#define FB_ACCEL_NEOMAGIC_NM2200 95	/* NeoMagic NM2200              */
-#define FB_ACCEL_NEOMAGIC_NM2230 96	/* NeoMagic NM2230              */
-#define FB_ACCEL_NEOMAGIC_NM2360 97	/* NeoMagic NM2360              */
-#define FB_ACCEL_NEOMAGIC_NM2380 98	/* NeoMagic NM2380              */
-#define FB_ACCEL_PXA3XX		 99	/* PXA3xx			*/
-
-#define FB_ACCEL_SAVAGE4        0x80	/* S3 Savage4                   */
-#define FB_ACCEL_SAVAGE3D       0x81	/* S3 Savage3D                  */
-#define FB_ACCEL_SAVAGE3D_MV    0x82	/* S3 Savage3D-MV               */
-#define FB_ACCEL_SAVAGE2000     0x83	/* S3 Savage2000                */
-#define FB_ACCEL_SAVAGE_MX_MV   0x84	/* S3 Savage/MX-MV              */
-#define FB_ACCEL_SAVAGE_MX      0x85	/* S3 Savage/MX                 */
-#define FB_ACCEL_SAVAGE_IX_MV   0x86	/* S3 Savage/IX-MV              */
-#define FB_ACCEL_SAVAGE_IX      0x87	/* S3 Savage/IX                 */
-#define FB_ACCEL_PROSAVAGE_PM   0x88	/* S3 ProSavage PM133           */
-#define FB_ACCEL_PROSAVAGE_KM   0x89	/* S3 ProSavage KM133           */
-#define FB_ACCEL_S3TWISTER_P    0x8a	/* S3 Twister                   */
-#define FB_ACCEL_S3TWISTER_K    0x8b	/* S3 TwisterK                  */
-#define FB_ACCEL_SUPERSAVAGE    0x8c    /* S3 Supersavage               */
-#define FB_ACCEL_PROSAVAGE_DDR  0x8d	/* S3 ProSavage DDR             */
-#define FB_ACCEL_PROSAVAGE_DDRK 0x8e	/* S3 ProSavage DDR-K           */
-
-#define FB_ACCEL_PUV3_UNIGFX	0xa0	/* PKUnity-v3 Unigfx		*/
-
-#define FB_CAP_FOURCC		1	/* Device supports FOURCC-based formats */
-
-struct fb_fix_screeninfo {
-	char id[16];			/* identification string eg "TT Builtin" */
-	unsigned long smem_start;	/* Start of frame buffer mem */
-					/* (physical address) */
-	__u32 smem_len;			/* Length of frame buffer mem */
-	__u32 type;			/* see FB_TYPE_*		*/
-	__u32 type_aux;			/* Interleave for interleaved Planes */
-	__u32 visual;			/* see FB_VISUAL_*		*/ 
-	__u16 xpanstep;			/* zero if no hardware panning  */
-	__u16 ypanstep;			/* zero if no hardware panning  */
-	__u16 ywrapstep;		/* zero if no hardware ywrap    */
-	__u32 line_length;		/* length of a line in bytes    */
-	unsigned long mmio_start;	/* Start of Memory Mapped I/O   */
-					/* (physical address) */
-	__u32 mmio_len;			/* Length of Memory Mapped I/O  */
-	__u32 accel;			/* Indicate to driver which	*/
-					/*  specific chip/card we have	*/
-	__u16 capabilities;		/* see FB_CAP_*			*/
-	__u16 reserved[2];		/* Reserved for future compatibility */
-};
-
-/* Interpretation of offset for color fields: All offsets are from the right,
- * inside a "pixel" value, which is exactly 'bits_per_pixel' wide (means: you
- * can use the offset as right argument to <<). A pixel afterwards is a bit
- * stream and is written to video memory as that unmodified.
- *
- * For pseudocolor: offset and length should be the same for all color
- * components. Offset specifies the position of the least significant bit
- * of the pallette index in a pixel value. Length indicates the number
- * of available palette entries (i.e. # of entries = 1 << length).
- */
-struct fb_bitfield {
-	__u32 offset;			/* beginning of bitfield	*/
-	__u32 length;			/* length of bitfield		*/
-	__u32 msb_right;		/* != 0 : Most significant bit is */ 
-					/* right */ 
-};
-
-#define FB_NONSTD_HAM		1	/* Hold-And-Modify (HAM)        */
-#define FB_NONSTD_REV_PIX_IN_B	2	/* order of pixels in each byte is reversed */
-
-#define FB_ACTIVATE_NOW		0	/* set values immediately (or vbl)*/
-#define FB_ACTIVATE_NXTOPEN	1	/* activate on next open	*/
-#define FB_ACTIVATE_TEST	2	/* don't set, round up impossible */
-#define FB_ACTIVATE_MASK       15
-					/* values			*/
-#define FB_ACTIVATE_VBL	       16	/* activate values on next vbl  */
-#define FB_CHANGE_CMAP_VBL     32	/* change colormap on vbl	*/
-#define FB_ACTIVATE_ALL	       64	/* change all VCs on this fb	*/
-#define FB_ACTIVATE_FORCE     128	/* force apply even when no change*/
-#define FB_ACTIVATE_INV_MODE  256       /* invalidate videomode */
-
-#define FB_ACCELF_TEXT		1	/* (OBSOLETE) see fb_info.flags and vc_mode */
-
-#define FB_SYNC_HOR_HIGH_ACT	1	/* horizontal sync high active	*/
-#define FB_SYNC_VERT_HIGH_ACT	2	/* vertical sync high active	*/
-#define FB_SYNC_EXT		4	/* external sync		*/
-#define FB_SYNC_COMP_HIGH_ACT	8	/* composite sync high active   */
-#define FB_SYNC_BROADCAST	16	/* broadcast video timings      */
-					/* vtotal = 144d/288n/576i => PAL  */
-					/* vtotal = 121d/242n/484i => NTSC */
-#define FB_SYNC_ON_GREEN	32	/* sync on green */
-
-#define FB_VMODE_NONINTERLACED  0	/* non interlaced */
-#define FB_VMODE_INTERLACED	1	/* interlaced	*/
-#define FB_VMODE_DOUBLE		2	/* double scan */
-#define FB_VMODE_ODD_FLD_FIRST	4	/* interlaced: top line first */
-#define FB_VMODE_MASK		255
-
-#define FB_VMODE_YWRAP		256	/* ywrap instead of panning     */
-#define FB_VMODE_SMOOTH_XPAN	512	/* smooth xpan possible (internally used) */
-#define FB_VMODE_CONUPDATE	512	/* don't update x/yoffset	*/
-
-/*
- * Display rotation support
- */
-#define FB_ROTATE_UR      0
-#define FB_ROTATE_CW      1
-#define FB_ROTATE_UD      2
-#define FB_ROTATE_CCW     3
-
-#define PICOS2KHZ(a) (1000000000UL/(a))
-#define KHZ2PICOS(a) (1000000000UL/(a))
-
-struct fb_var_screeninfo {
-	__u32 xres;			/* visible resolution		*/
-	__u32 yres;
-	__u32 xres_virtual;		/* virtual resolution		*/
-	__u32 yres_virtual;
-	__u32 xoffset;			/* offset from virtual to visible */
-	__u32 yoffset;			/* resolution			*/
-
-	__u32 bits_per_pixel;		/* guess what			*/
-	__u32 grayscale;		/* 0 = color, 1 = grayscale,	*/
-					/* >1 = FOURCC			*/
-	struct fb_bitfield red;		/* bitfield in fb mem if true color, */
-	struct fb_bitfield green;	/* else only length is significant */
-	struct fb_bitfield blue;
-	struct fb_bitfield transp;	/* transparency			*/	
-
-	__u32 nonstd;			/* != 0 Non standard pixel format */
-
-	__u32 activate;			/* see FB_ACTIVATE_*		*/
-
-	__u32 height;			/* height of picture in mm    */
-	__u32 width;			/* width of picture in mm     */
-
-	__u32 accel_flags;		/* (OBSOLETE) see fb_info.flags */
-
-	/* Timing: All values in pixclocks, except pixclock (of course) */
-	__u32 pixclock;			/* pixel clock in ps (pico seconds) */
-	__u32 left_margin;		/* time from sync to picture	*/
-	__u32 right_margin;		/* time from picture to sync	*/
-	__u32 upper_margin;		/* time from sync to picture	*/
-	__u32 lower_margin;
-	__u32 hsync_len;		/* length of horizontal sync	*/
-	__u32 vsync_len;		/* length of vertical sync	*/
-	__u32 sync;			/* see FB_SYNC_*		*/
-	__u32 vmode;			/* see FB_VMODE_*		*/
-	__u32 rotate;			/* angle we rotate counter clockwise */
-	__u32 colorspace;		/* colorspace for FOURCC-based modes */
-	__u32 reserved[4];		/* Reserved for future compatibility */
-};
-
-struct fb_cmap {
-	__u32 start;			/* First entry	*/
-	__u32 len;			/* Number of entries */
-	__u16 *red;			/* Red values	*/
-	__u16 *green;
-	__u16 *blue;
-	__u16 *transp;			/* transparency, can be NULL */
-};
-
-struct fb_con2fbmap {
-	__u32 console;
-	__u32 framebuffer;
-};
-
-/* VESA Blanking Levels */
-#define VESA_NO_BLANKING        0
-#define VESA_VSYNC_SUSPEND      1
-#define VESA_HSYNC_SUSPEND      2
-#define VESA_POWERDOWN          3
-
-
-enum {
-	/* screen: unblanked, hsync: on,  vsync: on */
-	FB_BLANK_UNBLANK       = VESA_NO_BLANKING,
-
-	/* screen: blanked,   hsync: on,  vsync: on */
-	FB_BLANK_NORMAL        = VESA_NO_BLANKING + 1,
-
-	/* screen: blanked,   hsync: on,  vsync: off */
-	FB_BLANK_VSYNC_SUSPEND = VESA_VSYNC_SUSPEND + 1,
-
-	/* screen: blanked,   hsync: off, vsync: on */
-	FB_BLANK_HSYNC_SUSPEND = VESA_HSYNC_SUSPEND + 1,
-
-	/* screen: blanked,   hsync: off, vsync: off */
-	FB_BLANK_POWERDOWN     = VESA_POWERDOWN + 1
-};
-
-#define FB_VBLANK_VBLANKING	0x001	/* currently in a vertical blank */
-#define FB_VBLANK_HBLANKING	0x002	/* currently in a horizontal blank */
-#define FB_VBLANK_HAVE_VBLANK	0x004	/* vertical blanks can be detected */
-#define FB_VBLANK_HAVE_HBLANK	0x008	/* horizontal blanks can be detected */
-#define FB_VBLANK_HAVE_COUNT	0x010	/* global retrace counter is available */
-#define FB_VBLANK_HAVE_VCOUNT	0x020	/* the vcount field is valid */
-#define FB_VBLANK_HAVE_HCOUNT	0x040	/* the hcount field is valid */
-#define FB_VBLANK_VSYNCING	0x080	/* currently in a vsync */
-#define FB_VBLANK_HAVE_VSYNC	0x100	/* verical syncs can be detected */
-
-struct fb_vblank {
-	__u32 flags;			/* FB_VBLANK flags */
-	__u32 count;			/* counter of retraces since boot */
-	__u32 vcount;			/* current scanline position */
-	__u32 hcount;			/* current scandot position */
-	__u32 reserved[4];		/* reserved for future compatibility */
-};
-
-/* Internal HW accel */
-#define ROP_COPY 0
-#define ROP_XOR  1
-
-struct fb_copyarea {
-	__u32 dx;
-	__u32 dy;
-	__u32 width;
-	__u32 height;
-	__u32 sx;
-	__u32 sy;
-};
-
-struct fb_fillrect {
-	__u32 dx;	/* screen-relative */
-	__u32 dy;
-	__u32 width;
-	__u32 height;
-	__u32 color;
-	__u32 rop;
-};
-
-struct fb_image {
-	__u32 dx;		/* Where to place image */
-	__u32 dy;
-	__u32 width;		/* Size of image */
-	__u32 height;
-	__u32 fg_color;		/* Only used when a mono bitmap */
-	__u32 bg_color;
-	__u8  depth;		/* Depth of the image */
-	const char *data;	/* Pointer to image data */
-	struct fb_cmap cmap;	/* color map info */
-};
-
-/*
- * hardware cursor control
- */
-
-#define FB_CUR_SETIMAGE 0x01
-#define FB_CUR_SETPOS   0x02
-#define FB_CUR_SETHOT   0x04
-#define FB_CUR_SETCMAP  0x08
-#define FB_CUR_SETSHAPE 0x10
-#define FB_CUR_SETSIZE	0x20
-#define FB_CUR_SETALL   0xFF
-
-struct fbcurpos {
-	__u16 x, y;
-};
-
-struct fb_cursor {
-	__u16 set;		/* what to set */
-	__u16 enable;		/* cursor on/off */
-	__u16 rop;		/* bitop operation */
-	const char *mask;	/* cursor mask bits */
-	struct fbcurpos hot;	/* cursor hot spot */
-	struct fb_image	image;	/* Cursor image */
-};
-
-#ifdef CONFIG_FB_BACKLIGHT
-/* Settings for the generic backlight code */
-#define FB_BACKLIGHT_LEVELS	128
-#define FB_BACKLIGHT_MAX	0xFF
-#endif
-
-#ifdef __KERNEL__
-
-#include <linux/fs.h>
-#include <linux/init.h>
-#include <linux/workqueue.h>
-#include <linux/notifier.h>
-#include <linux/list.h>
-#include <linux/backlight.h>
-#include <linux/slab.h>
-#include <asm/io.h>
-
-struct vm_area_struct;
-struct fb_info;
-struct device;
-struct file;
-
-/* Definitions below are used in the parsed monitor specs */
-#define FB_DPMS_ACTIVE_OFF	1
-#define FB_DPMS_SUSPEND		2
-#define FB_DPMS_STANDBY		4
-
-#define FB_DISP_DDI		1
-#define FB_DISP_ANA_700_300	2
-#define FB_DISP_ANA_714_286	4
-#define FB_DISP_ANA_1000_400	8
-#define FB_DISP_ANA_700_000	16
-
-#define FB_DISP_MONO		32
-#define FB_DISP_RGB		64
-#define FB_DISP_MULTI		128
-#define FB_DISP_UNKNOWN		256
-
-#define FB_SIGNAL_NONE		0
-#define FB_SIGNAL_BLANK_BLANK	1
-#define FB_SIGNAL_SEPARATE	2
-#define FB_SIGNAL_COMPOSITE	4
-#define FB_SIGNAL_SYNC_ON_GREEN	8
-#define FB_SIGNAL_SERRATION_ON	16
-
-#define FB_MISC_PRIM_COLOR	1
-#define FB_MISC_1ST_DETAIL	2	/* First Detailed Timing is preferred */
-struct fb_chroma {
-	__u32 redx;	/* in fraction of 1024 */
-	__u32 greenx;
-	__u32 bluex;
-	__u32 whitex;
-	__u32 redy;
-	__u32 greeny;
-	__u32 bluey;
-	__u32 whitey;
-};
-
-struct fb_monspecs {
-	struct fb_chroma chroma;
-	struct fb_videomode *modedb;	/* mode database */
-	__u8  manufacturer[4];		/* Manufacturer */
-	__u8  monitor[14];		/* Monitor String */
-	__u8  serial_no[14];		/* Serial Number */
-	__u8  ascii[14];		/* ? */
-	__u32 modedb_len;		/* mode database length */
-	__u32 model;			/* Monitor Model */
-	__u32 serial;			/* Serial Number - Integer */
-	__u32 year;			/* Year manufactured */
-	__u32 week;			/* Week Manufactured */
-	__u32 hfmin;			/* hfreq lower limit (Hz) */
-	__u32 hfmax;			/* hfreq upper limit (Hz) */
-	__u32 dclkmin;			/* pixelclock lower limit (Hz) */
-	__u32 dclkmax;			/* pixelclock upper limit (Hz) */
-	__u16 input;			/* display type - see FB_DISP_* */
-	__u16 dpms;			/* DPMS support - see FB_DPMS_ */
-	__u16 signal;			/* Signal Type - see FB_SIGNAL_* */
-	__u16 vfmin;			/* vfreq lower limit (Hz) */
-	__u16 vfmax;			/* vfreq upper limit (Hz) */
-	__u16 gamma;			/* Gamma - in fractions of 100 */
-	__u16 gtf	: 1;		/* supports GTF */
-	__u16 misc;			/* Misc flags - see FB_MISC_* */
-	__u8  version;			/* EDID version... */
-	__u8  revision;			/* ...and revision */
-	__u8  max_x;			/* Maximum horizontal size (cm) */
-	__u8  max_y;			/* Maximum vertical size (cm) */
-};
-
-struct fb_cmap_user {
-	__u32 start;			/* First entry	*/
-	__u32 len;			/* Number of entries */
-	__u16 __user *red;		/* Red values	*/
-	__u16 __user *green;
-	__u16 __user *blue;
-	__u16 __user *transp;		/* transparency, can be NULL */
-};
-
-struct fb_image_user {
-	__u32 dx;			/* Where to place image */
-	__u32 dy;
-	__u32 width;			/* Size of image */
-	__u32 height;
-	__u32 fg_color;			/* Only used when a mono bitmap */
-	__u32 bg_color;
-	__u8  depth;			/* Depth of the image */
-	const char __user *data;	/* Pointer to image data */
-	struct fb_cmap_user cmap;	/* color map info */
-};
-
-struct fb_cursor_user {
-	__u16 set;			/* what to set */
-	__u16 enable;			/* cursor on/off */
-	__u16 rop;			/* bitop operation */
-	const char __user *mask;	/* cursor mask bits */
-	struct fbcurpos hot;		/* cursor hot spot */
-	struct fb_image_user image;	/* Cursor image */
-};
-
-/*
- * Register/unregister for framebuffer events
- */
-
-/*	The resolution of the passed in fb_info about to change */ 
-#define FB_EVENT_MODE_CHANGE		0x01
-/*	The display on this fb_info is beeing suspended, no access to the
- *	framebuffer is allowed any more after that call returns
- */
-#define FB_EVENT_SUSPEND		0x02
-/*	The display on this fb_info was resumed, you can restore the display
- *	if you own it
- */
-#define FB_EVENT_RESUME			0x03
-/*      An entry from the modelist was removed */
-#define FB_EVENT_MODE_DELETE            0x04
-/*      A driver registered itself */
-#define FB_EVENT_FB_REGISTERED          0x05
-/*      A driver unregistered itself */
-#define FB_EVENT_FB_UNREGISTERED        0x06
-/*      CONSOLE-SPECIFIC: get console to framebuffer mapping */
-#define FB_EVENT_GET_CONSOLE_MAP        0x07
-/*      CONSOLE-SPECIFIC: set console to framebuffer mapping */
-#define FB_EVENT_SET_CONSOLE_MAP        0x08
-/*      A hardware display blank change occurred */
-#define FB_EVENT_BLANK                  0x09
-/*      Private modelist is to be replaced */
-#define FB_EVENT_NEW_MODELIST           0x0A
-/*	The resolution of the passed in fb_info about to change and
-        all vc's should be changed         */
-#define FB_EVENT_MODE_CHANGE_ALL	0x0B
-/*	A software display blank change occurred */
-#define FB_EVENT_CONBLANK               0x0C
-/*      Get drawing requirements        */
-#define FB_EVENT_GET_REQ                0x0D
-/*      Unbind from the console if possible */
-#define FB_EVENT_FB_UNBIND              0x0E
-/*      CONSOLE-SPECIFIC: remap all consoles to new fb - for vga switcheroo */
-#define FB_EVENT_REMAP_ALL_CONSOLE      0x0F
-
-struct fb_event {
-	struct fb_info *info;
-	void *data;
-};
-
-struct fb_blit_caps {
-	u32 x;
-	u32 y;
-	u32 len;
-	u32 flags;
-};
-
-extern int fb_register_client(struct notifier_block *nb);
-extern int fb_unregister_client(struct notifier_block *nb);
-extern int fb_notifier_call_chain(unsigned long val, void *v);
-/*
- * Pixmap structure definition
- *
- * The purpose of this structure is to translate data
- * from the hardware independent format of fbdev to what
- * format the hardware needs.
- */
-
-#define FB_PIXMAP_DEFAULT 1     /* used internally by fbcon */
-#define FB_PIXMAP_SYSTEM  2     /* memory is in system RAM  */
-#define FB_PIXMAP_IO      4     /* memory is iomapped       */
-#define FB_PIXMAP_SYNC    256   /* set if GPU can DMA       */
-
-struct fb_pixmap {
-	u8  *addr;		/* pointer to memory			*/
-	u32 size;		/* size of buffer in bytes		*/
-	u32 offset;		/* current offset to buffer		*/
-	u32 buf_align;		/* byte alignment of each bitmap	*/
-	u32 scan_align;		/* alignment per scanline		*/
-	u32 access_align;	/* alignment per read/write (bits)	*/
-	u32 flags;		/* see FB_PIXMAP_*			*/
-	u32 blit_x;             /* supported bit block dimensions (1-32)*/
-	u32 blit_y;             /* Format: blit_x = 1 << (width - 1)    */
-	                        /*         blit_y = 1 << (height - 1)   */
-	                        /* if 0, will be set to 0xffffffff (all)*/
-	/* access methods */
-	void (*writeio)(struct fb_info *info, void __iomem *dst, void *src, unsigned int size);
-	void (*readio) (struct fb_info *info, void *dst, void __iomem *src, unsigned int size);
-};
-
-#ifdef CONFIG_FB_DEFERRED_IO
-struct fb_deferred_io {
-	/* delay between mkwrite and deferred handler */
-	unsigned long delay;
-	struct mutex lock; /* mutex that protects the page list */
-	struct list_head pagelist; /* list of touched pages */
-	/* callback */
-	void (*deferred_io)(struct fb_info *info, struct list_head *pagelist);
-};
-#endif
-
-/*
- * Frame buffer operations
- *
- * LOCKING NOTE: those functions must _ALL_ be called with the console
- * semaphore held, this is the only suitable locking mechanism we have
- * in 2.6. Some may be called at interrupt time at this point though.
- *
- * The exception to this is the debug related hooks.  Putting the fb
- * into a debug state (e.g. flipping to the kernel console) and restoring
- * it must be done in a lock-free manner, so low level drivers should
- * keep track of the initial console (if applicable) and may need to
- * perform direct, unlocked hardware writes in these hooks.
- */
-
-struct fb_ops {
-	/* open/release and usage marking */
-	struct module *owner;
-	int (*fb_open)(struct fb_info *info, int user);
-	int (*fb_release)(struct fb_info *info, int user);
-
-	/* For framebuffers with strange non linear layouts or that do not
-	 * work with normal memory mapped access
-	 */
-	ssize_t (*fb_read)(struct fb_info *info, char __user *buf,
-			   size_t count, loff_t *ppos);
-	ssize_t (*fb_write)(struct fb_info *info, const char __user *buf,
-			    size_t count, loff_t *ppos);
-
-	/* checks var and eventually tweaks it to something supported,
-	 * DO NOT MODIFY PAR */
-	int (*fb_check_var)(struct fb_var_screeninfo *var, struct fb_info *info);
-
-	/* set the video mode according to info->var */
-	int (*fb_set_par)(struct fb_info *info);
-
-	/* set color register */
-	int (*fb_setcolreg)(unsigned regno, unsigned red, unsigned green,
-			    unsigned blue, unsigned transp, struct fb_info *info);
-
-	/* set color registers in batch */
-	int (*fb_setcmap)(struct fb_cmap *cmap, struct fb_info *info);
-
-	/* blank display */
-	int (*fb_blank)(int blank, struct fb_info *info);
-
-	/* pan display */
-	int (*fb_pan_display)(struct fb_var_screeninfo *var, struct fb_info *info);
-
-	/* Draws a rectangle */
-	void (*fb_fillrect) (struct fb_info *info, const struct fb_fillrect *rect);
-	/* Copy data from area to another */
-	void (*fb_copyarea) (struct fb_info *info, const struct fb_copyarea *region);
-	/* Draws a image to the display */
-	void (*fb_imageblit) (struct fb_info *info, const struct fb_image *image);
-
-	/* Draws cursor */
-	int (*fb_cursor) (struct fb_info *info, struct fb_cursor *cursor);
-
-	/* Rotates the display */
-	void (*fb_rotate)(struct fb_info *info, int angle);
-
-	/* wait for blit idle, optional */
-	int (*fb_sync)(struct fb_info *info);
-
-	/* perform fb specific ioctl (optional) */
-	int (*fb_ioctl)(struct fb_info *info, unsigned int cmd,
-			unsigned long arg);
-
-	/* Handle 32bit compat ioctl (optional) */
-	int (*fb_compat_ioctl)(struct fb_info *info, unsigned cmd,
-			unsigned long arg);
-
-	/* perform fb specific mmap */
-	int (*fb_mmap)(struct fb_info *info, struct vm_area_struct *vma);
-
-	/* get capability given var */
-	void (*fb_get_caps)(struct fb_info *info, struct fb_blit_caps *caps,
-			    struct fb_var_screeninfo *var);
-
-	/* teardown any resources to do with this framebuffer */
-	void (*fb_destroy)(struct fb_info *info);
-
-	/* called at KDB enter and leave time to prepare the console */
-	int (*fb_debug_enter)(struct fb_info *info);
-	int (*fb_debug_leave)(struct fb_info *info);
-};
-
-#ifdef CONFIG_FB_TILEBLITTING
-#define FB_TILE_CURSOR_NONE        0
-#define FB_TILE_CURSOR_UNDERLINE   1
-#define FB_TILE_CURSOR_LOWER_THIRD 2
-#define FB_TILE_CURSOR_LOWER_HALF  3
-#define FB_TILE_CURSOR_TWO_THIRDS  4
-#define FB_TILE_CURSOR_BLOCK       5
-
-struct fb_tilemap {
-	__u32 width;                /* width of each tile in pixels */
-	__u32 height;               /* height of each tile in scanlines */
-	__u32 depth;                /* color depth of each tile */
-	__u32 length;               /* number of tiles in the map */
-	const __u8 *data;           /* actual tile map: a bitmap array, packed
-				       to the nearest byte */
-};
-
-struct fb_tilerect {
-	__u32 sx;                   /* origin in the x-axis */
-	__u32 sy;                   /* origin in the y-axis */
-	__u32 width;                /* number of tiles in the x-axis */
-	__u32 height;               /* number of tiles in the y-axis */
-	__u32 index;                /* what tile to use: index to tile map */
-	__u32 fg;                   /* foreground color */
-	__u32 bg;                   /* background color */
-	__u32 rop;                  /* raster operation */
-};
-
-struct fb_tilearea {
-	__u32 sx;                   /* source origin in the x-axis */
-	__u32 sy;                   /* source origin in the y-axis */
-	__u32 dx;                   /* destination origin in the x-axis */
-	__u32 dy;                   /* destination origin in the y-axis */
-	__u32 width;                /* number of tiles in the x-axis */
-	__u32 height;               /* number of tiles in the y-axis */
-};
-
-struct fb_tileblit {
-	__u32 sx;                   /* origin in the x-axis */
-	__u32 sy;                   /* origin in the y-axis */
-	__u32 width;                /* number of tiles in the x-axis */
-	__u32 height;               /* number of tiles in the y-axis */
-	__u32 fg;                   /* foreground color */
-	__u32 bg;                   /* background color */
-	__u32 length;               /* number of tiles to draw */
-	__u32 *indices;             /* array of indices to tile map */
-};
-
-struct fb_tilecursor {
-	__u32 sx;                   /* cursor position in the x-axis */
-	__u32 sy;                   /* cursor position in the y-axis */
-	__u32 mode;                 /* 0 = erase, 1 = draw */
-	__u32 shape;                /* see FB_TILE_CURSOR_* */
-	__u32 fg;                   /* foreground color */
-	__u32 bg;                   /* background color */
-};
-
-struct fb_tile_ops {
-	/* set tile characteristics */
-	void (*fb_settile)(struct fb_info *info, struct fb_tilemap *map);
-
-	/* all dimensions from hereon are in terms of tiles */
-
-	/* move a rectangular region of tiles from one area to another*/
-	void (*fb_tilecopy)(struct fb_info *info, struct fb_tilearea *area);
-	/* fill a rectangular region with a tile */
-	void (*fb_tilefill)(struct fb_info *info, struct fb_tilerect *rect);
-	/* copy an array of tiles */
-	void (*fb_tileblit)(struct fb_info *info, struct fb_tileblit *blit);
-	/* cursor */
-	void (*fb_tilecursor)(struct fb_info *info,
-			      struct fb_tilecursor *cursor);
-	/* get maximum length of the tile map */
-	int (*fb_get_tilemax)(struct fb_info *info);
-};
-#endif /* CONFIG_FB_TILEBLITTING */
-
-/* FBINFO_* = fb_info.flags bit flags */
-#define FBINFO_MODULE		0x0001	/* Low-level driver is a module */
-#define FBINFO_HWACCEL_DISABLED	0x0002
-	/* When FBINFO_HWACCEL_DISABLED is set:
-	 *  Hardware acceleration is turned off.  Software implementations
-	 *  of required functions (copyarea(), fillrect(), and imageblit())
-	 *  takes over; acceleration engine should be in a quiescent state */
-
-/* hints */
-#define FBINFO_VIRTFB		0x0004 /* FB is System RAM, not device. */
-#define FBINFO_PARTIAL_PAN_OK	0x0040 /* otw use pan only for double-buffering */
-#define FBINFO_READS_FAST	0x0080 /* soft-copy faster than rendering */
-
-/* hardware supported ops */
-/*  semantics: when a bit is set, it indicates that the operation is
- *   accelerated by hardware.
- *  required functions will still work even if the bit is not set.
- *  optional functions may not even exist if the flag bit is not set.
- */
-#define FBINFO_HWACCEL_NONE		0x0000
-#define FBINFO_HWACCEL_COPYAREA		0x0100 /* required */
-#define FBINFO_HWACCEL_FILLRECT		0x0200 /* required */
-#define FBINFO_HWACCEL_IMAGEBLIT	0x0400 /* required */
-#define FBINFO_HWACCEL_ROTATE		0x0800 /* optional */
-#define FBINFO_HWACCEL_XPAN		0x1000 /* optional */
-#define FBINFO_HWACCEL_YPAN		0x2000 /* optional */
-#define FBINFO_HWACCEL_YWRAP		0x4000 /* optional */
-
-#define FBINFO_MISC_USEREVENT          0x10000 /* event request
-						  from userspace */
-#define FBINFO_MISC_TILEBLITTING       0x20000 /* use tile blitting */
-
-/* A driver may set this flag to indicate that it does want a set_par to be
- * called every time when fbcon_switch is executed. The advantage is that with
- * this flag set you can really be sure that set_par is always called before
- * any of the functions dependent on the correct hardware state or altering
- * that state, even if you are using some broken X releases. The disadvantage
- * is that it introduces unwanted delays to every console switch if set_par
- * is slow. It is a good idea to try this flag in the drivers initialization
- * code whenever there is a bug report related to switching between X and the
- * framebuffer console.
- */
-#define FBINFO_MISC_ALWAYS_SETPAR   0x40000
-
-/* where the fb is a firmware driver, and can be replaced with a proper one */
-#define FBINFO_MISC_FIRMWARE        0x80000
-/*
- * Host and GPU endianness differ.
- */
-#define FBINFO_FOREIGN_ENDIAN	0x100000
-/*
- * Big endian math. This is the same flags as above, but with different
- * meaning, it is set by the fb subsystem depending FOREIGN_ENDIAN flag
- * and host endianness. Drivers should not use this flag.
- */
-#define FBINFO_BE_MATH  0x100000
-
-/* report to the VT layer that this fb driver can accept forced console
-   output like oopses */
-#define FBINFO_CAN_FORCE_OUTPUT     0x200000
-
-struct fb_info {
-	atomic_t count;
-	int node;
-	int flags;
-	struct mutex lock;		/* Lock for open/release/ioctl funcs */
-	struct mutex mm_lock;		/* Lock for fb_mmap and smem_* fields */
-	struct fb_var_screeninfo var;	/* Current var */
-	struct fb_fix_screeninfo fix;	/* Current fix */
-	struct fb_monspecs monspecs;	/* Current Monitor specs */
-	struct work_struct queue;	/* Framebuffer event queue */
-	struct fb_pixmap pixmap;	/* Image hardware mapper */
-	struct fb_pixmap sprite;	/* Cursor hardware mapper */
-	struct fb_cmap cmap;		/* Current cmap */
-	struct list_head modelist;      /* mode list */
-	struct fb_videomode *mode;	/* current mode */
-
-#ifdef CONFIG_FB_BACKLIGHT
-	/* assigned backlight device */
-	/* set before framebuffer registration, 
-	   remove after unregister */
-	struct backlight_device *bl_dev;
-
-	/* Backlight level curve */
-	struct mutex bl_curve_mutex;	
-	u8 bl_curve[FB_BACKLIGHT_LEVELS];
-#endif
-#ifdef CONFIG_FB_DEFERRED_IO
-	struct delayed_work deferred_work;
-	struct fb_deferred_io *fbdefio;
-#endif
-
-	struct fb_ops *fbops;
-	struct device *device;		/* This is the parent */
-	struct device *dev;		/* This is this fb device */
-	int class_flag;                    /* private sysfs flags */
-#ifdef CONFIG_FB_TILEBLITTING
-	struct fb_tile_ops *tileops;    /* Tile Blitting */
-#endif
-	char __iomem *screen_base;	/* Virtual address */
-	unsigned long screen_size;	/* Amount of ioremapped VRAM or 0 */ 
-	void *pseudo_palette;		/* Fake palette of 16 colors */ 
-#define FBINFO_STATE_RUNNING	0
-#define FBINFO_STATE_SUSPENDED	1
-	u32 state;			/* Hardware state i.e suspend */
-	void *fbcon_par;                /* fbcon use-only private area */
-	/* From here on everything is device dependent */
-	void *par;
-	/* we need the PCI or similar aperture base/size not
-	   smem_start/size as smem_start may just be an object
-	   allocated inside the aperture so may not actually overlap */
-	struct apertures_struct {
-		unsigned int count;
-		struct aperture {
-			resource_size_t base;
-			resource_size_t size;
-		} ranges[0];
-	} *apertures;
-};
-
-static inline struct apertures_struct *alloc_apertures(unsigned int max_num) {
-	struct apertures_struct *a = kzalloc(sizeof(struct apertures_struct)
-			+ max_num * sizeof(struct aperture), GFP_KERNEL);
-	if (!a)
-		return NULL;
-	a->count = max_num;
-	return a;
-}
-
-#ifdef MODULE
-#define FBINFO_DEFAULT	FBINFO_MODULE
-#else
-#define FBINFO_DEFAULT	0
-#endif
-
-// This will go away
-#define FBINFO_FLAG_MODULE	FBINFO_MODULE
-#define FBINFO_FLAG_DEFAULT	FBINFO_DEFAULT
-
-/* This will go away
- * fbset currently hacks in FB_ACCELF_TEXT into var.accel_flags
- * when it wants to turn the acceleration engine on.  This is
- * really a separate operation, and should be modified via sysfs.
- *  But for now, we leave it broken with the following define
- */
-#define STUPID_ACCELF_TEXT_SHIT
-
-// This will go away
-#if defined(__sparc__)
-
-/* We map all of our framebuffers such that big-endian accesses
- * are what we want, so the following is sufficient.
- */
-
-// This will go away
-#define fb_readb sbus_readb
-#define fb_readw sbus_readw
-#define fb_readl sbus_readl
-#define fb_readq sbus_readq
-#define fb_writeb sbus_writeb
-#define fb_writew sbus_writew
-#define fb_writel sbus_writel
-#define fb_writeq sbus_writeq
-#define fb_memset sbus_memset_io
-#define fb_memcpy_fromfb sbus_memcpy_fromio
-#define fb_memcpy_tofb sbus_memcpy_toio
-
-#elif defined(__i386__) || defined(__alpha__) || defined(__x86_64__) || defined(__hppa__) || defined(__sh__) || defined(__powerpc__) || defined(__avr32__) || defined(__bfin__)
-
-#define fb_readb __raw_readb
-#define fb_readw __raw_readw
-#define fb_readl __raw_readl
-#define fb_readq __raw_readq
-#define fb_writeb __raw_writeb
-#define fb_writew __raw_writew
-#define fb_writel __raw_writel
-#define fb_writeq __raw_writeq
-#define fb_memset memset_io
-#define fb_memcpy_fromfb memcpy_fromio
-#define fb_memcpy_tofb memcpy_toio
-
-#else
-
-#define fb_readb(addr) (*(volatile u8 *) (addr))
-#define fb_readw(addr) (*(volatile u16 *) (addr))
-#define fb_readl(addr) (*(volatile u32 *) (addr))
-#define fb_readq(addr) (*(volatile u64 *) (addr))
-#define fb_writeb(b,addr) (*(volatile u8 *) (addr) = (b))
-#define fb_writew(b,addr) (*(volatile u16 *) (addr) = (b))
-#define fb_writel(b,addr) (*(volatile u32 *) (addr) = (b))
-#define fb_writeq(b,addr) (*(volatile u64 *) (addr) = (b))
-#define fb_memset memset
-#define fb_memcpy_fromfb memcpy
-#define fb_memcpy_tofb memcpy
-
-#endif
-
-#define FB_LEFT_POS(p, bpp)          (fb_be_math(p) ? (32 - (bpp)) : 0)
-#define FB_SHIFT_HIGH(p, val, bits)  (fb_be_math(p) ? (val) >> (bits) : \
-						      (val) << (bits))
-#define FB_SHIFT_LOW(p, val, bits)   (fb_be_math(p) ? (val) << (bits) : \
-						      (val) >> (bits))
-
-    /*
-     *  `Generic' versions of the frame buffer device operations
-     */
-
-extern int fb_set_var(struct fb_info *info, struct fb_var_screeninfo *var); 
-extern int fb_pan_display(struct fb_info *info, struct fb_var_screeninfo *var); 
-extern int fb_blank(struct fb_info *info, int blank);
-extern void cfb_fillrect(struct fb_info *info, const struct fb_fillrect *rect); 
-extern void cfb_copyarea(struct fb_info *info, const struct fb_copyarea *area); 
-extern void cfb_imageblit(struct fb_info *info, const struct fb_image *image);
-/*
- * Drawing operations where framebuffer is in system RAM
- */
-extern void sys_fillrect(struct fb_info *info, const struct fb_fillrect *rect);
-extern void sys_copyarea(struct fb_info *info, const struct fb_copyarea *area);
-extern void sys_imageblit(struct fb_info *info, const struct fb_image *image);
-extern ssize_t fb_sys_read(struct fb_info *info, char __user *buf,
-			   size_t count, loff_t *ppos);
-extern ssize_t fb_sys_write(struct fb_info *info, const char __user *buf,
-			    size_t count, loff_t *ppos);
-
-/* drivers/video/fbmem.c */
-extern int register_framebuffer(struct fb_info *fb_info);
-extern int unregister_framebuffer(struct fb_info *fb_info);
-extern int unlink_framebuffer(struct fb_info *fb_info);
-extern void remove_conflicting_framebuffers(struct apertures_struct *a,
-				const char *name, bool primary);
-extern int fb_prepare_logo(struct fb_info *fb_info, int rotate);
-extern int fb_show_logo(struct fb_info *fb_info, int rotate);
-extern char* fb_get_buffer_offset(struct fb_info *info, struct fb_pixmap *buf, u32 size);
-extern void fb_pad_unaligned_buffer(u8 *dst, u32 d_pitch, u8 *src, u32 idx,
-				u32 height, u32 shift_high, u32 shift_low, u32 mod);
-extern void fb_pad_aligned_buffer(u8 *dst, u32 d_pitch, u8 *src, u32 s_pitch, u32 height);
-extern void fb_set_suspend(struct fb_info *info, int state);
-extern int fb_get_color_depth(struct fb_var_screeninfo *var,
-			      struct fb_fix_screeninfo *fix);
-extern int fb_get_options(char *name, char **option);
-extern int fb_new_modelist(struct fb_info *info);
-
-extern struct fb_info *registered_fb[FB_MAX];
-extern int num_registered_fb;
-extern struct class *fb_class;
-
-extern int lock_fb_info(struct fb_info *info);
-
-static inline void unlock_fb_info(struct fb_info *info)
-{
-	mutex_unlock(&info->lock);
-}
-
-static inline void __fb_pad_aligned_buffer(u8 *dst, u32 d_pitch,
-					   u8 *src, u32 s_pitch, u32 height)
-{
-	int i, j;
-
-	d_pitch -= s_pitch;
-
-	for (i = height; i--; ) {
-		/* s_pitch is a few bytes at the most, memcpy is suboptimal */
-		for (j = 0; j < s_pitch; j++)
-			*dst++ = *src++;
-		dst += d_pitch;
-	}
-}
-
-/* drivers/video/fb_defio.c */
-extern void fb_deferred_io_init(struct fb_info *info);
-extern void fb_deferred_io_open(struct fb_info *info,
-				struct inode *inode,
-				struct file *file);
-extern void fb_deferred_io_cleanup(struct fb_info *info);
-extern int fb_deferred_io_fsync(struct file *file, loff_t start,
-				loff_t end, int datasync);
-
-static inline bool fb_be_math(struct fb_info *info)
-{
-#ifdef CONFIG_FB_FOREIGN_ENDIAN
-#if defined(CONFIG_FB_BOTH_ENDIAN)
-	return info->flags & FBINFO_BE_MATH;
-#elif defined(CONFIG_FB_BIG_ENDIAN)
-	return true;
-#elif defined(CONFIG_FB_LITTLE_ENDIAN)
-	return false;
-#endif /* CONFIG_FB_BOTH_ENDIAN */
-#else
-#ifdef __BIG_ENDIAN
-	return true;
-#else
-	return false;
-#endif /* __BIG_ENDIAN */
-#endif /* CONFIG_FB_FOREIGN_ENDIAN */
-}
-
-/* drivers/video/fbsysfs.c */
-extern struct fb_info *framebuffer_alloc(size_t size, struct device *dev);
-extern void framebuffer_release(struct fb_info *info);
-extern int fb_init_device(struct fb_info *fb_info);
-extern void fb_cleanup_device(struct fb_info *head);
-extern void fb_bl_default_curve(struct fb_info *fb_info, u8 off, u8 min, u8 max);
-
-/* drivers/video/fbmon.c */
-#define FB_MAXTIMINGS		0
-#define FB_VSYNCTIMINGS		1
-#define FB_HSYNCTIMINGS		2
-#define FB_DCLKTIMINGS		3
-#define FB_IGNOREMON		0x100
-
-#define FB_MODE_IS_UNKNOWN	0
-#define FB_MODE_IS_DETAILED	1
-#define FB_MODE_IS_STANDARD	2
-#define FB_MODE_IS_VESA		4
-#define FB_MODE_IS_CALCULATED	8
-#define FB_MODE_IS_FIRST	16
-#define FB_MODE_IS_FROM_VAR     32
-
-extern int fbmon_dpms(const struct fb_info *fb_info);
-extern int fb_get_mode(int flags, u32 val, struct fb_var_screeninfo *var,
-		       struct fb_info *info);
-extern int fb_validate_mode(const struct fb_var_screeninfo *var,
-			    struct fb_info *info);
-extern int fb_parse_edid(unsigned char *edid, struct fb_var_screeninfo *var);
-extern const unsigned char *fb_firmware_edid(struct device *device);
-extern void fb_edid_to_monspecs(unsigned char *edid,
-				struct fb_monspecs *specs);
-extern void fb_edid_add_monspecs(unsigned char *edid,
-				 struct fb_monspecs *specs);
-extern void fb_destroy_modedb(struct fb_videomode *modedb);
-extern int fb_find_mode_cvt(struct fb_videomode *mode, int margins, int rb);
-extern unsigned char *fb_ddc_read(struct i2c_adapter *adapter);
-
-/* drivers/video/modedb.c */
-#define VESA_MODEDB_SIZE 34
-extern void fb_var_to_videomode(struct fb_videomode *mode,
-				const struct fb_var_screeninfo *var);
-extern void fb_videomode_to_var(struct fb_var_screeninfo *var,
-				const struct fb_videomode *mode);
-extern int fb_mode_is_equal(const struct fb_videomode *mode1,
-			    const struct fb_videomode *mode2);
-extern int fb_add_videomode(const struct fb_videomode *mode,
-			    struct list_head *head);
-extern void fb_delete_videomode(const struct fb_videomode *mode,
-				struct list_head *head);
-extern const struct fb_videomode *fb_match_mode(const struct fb_var_screeninfo *var,
-						struct list_head *head);
-extern const struct fb_videomode *fb_find_best_mode(const struct fb_var_screeninfo *var,
-						    struct list_head *head);
-extern const struct fb_videomode *fb_find_nearest_mode(const struct fb_videomode *mode,
-						       struct list_head *head);
-extern void fb_destroy_modelist(struct list_head *head);
-extern void fb_videomode_to_modelist(const struct fb_videomode *modedb, int num,
-				     struct list_head *head);
-extern const struct fb_videomode *fb_find_best_display(const struct fb_monspecs *specs,
-						       struct list_head *head);
-
-/* drivers/video/fbcmap.c */
-extern int fb_alloc_cmap(struct fb_cmap *cmap, int len, int transp);
-extern int fb_alloc_cmap_gfp(struct fb_cmap *cmap, int len, int transp, gfp_t flags);
-extern void fb_dealloc_cmap(struct fb_cmap *cmap);
-extern int fb_copy_cmap(const struct fb_cmap *from, struct fb_cmap *to);
-extern int fb_cmap_to_user(const struct fb_cmap *from, struct fb_cmap_user *to);
-extern int fb_set_cmap(struct fb_cmap *cmap, struct fb_info *fb_info);
-extern int fb_set_user_cmap(struct fb_cmap_user *cmap, struct fb_info *fb_info);
-extern const struct fb_cmap *fb_default_cmap(int len);
-extern void fb_invert_cmaps(void);
-
-struct fb_videomode {
-	const char *name;	/* optional */
-	u32 refresh;		/* optional */
-	u32 xres;
-	u32 yres;
-	u32 pixclock;
-	u32 left_margin;
-	u32 right_margin;
-	u32 upper_margin;
-	u32 lower_margin;
-	u32 hsync_len;
-	u32 vsync_len;
-	u32 sync;
-	u32 vmode;
-	u32 flag;
-};
-
-extern const char *fb_mode_option;
-extern const struct fb_videomode vesa_modes[];
-extern const struct fb_videomode cea_modes[64];
-
-struct fb_modelist {
-	struct list_head list;
-	struct fb_videomode mode;
-};
-
-extern int fb_find_mode(struct fb_var_screeninfo *var,
-			struct fb_info *info, const char *mode_option,
-			const struct fb_videomode *db,
-			unsigned int dbsize,
-			const struct fb_videomode *default_mode,
-			unsigned int default_bpp);
-
-#endif /* __KERNEL__ */
-
-#endif /* _LINUX_FB_H */
diff --git a/ANDROID_3.4.5/include/linux/fcdevice.h b/ANDROID_3.4.5/include/linux/fcdevice.h
deleted file mode 100644
index e460ef83..00000000
--- a/ANDROID_3.4.5/include/linux/fcdevice.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * INET		An implementation of the TCP/IP protocol suite for the LINUX
- *		operating system.  NET  is implemented using the  BSD Socket
- *		interface as the means of communication with the user level.
- *
- *		Definitions for the Fibre Channel handlers.
- *
- * Version:	@(#)fcdevice.h	1.0.0	09/26/98
- *
- * Authors:	Vineet Abraham <vma@iol.unh.edu>
- *
- *		Relocated to include/linux where it belongs by Alan Cox 
- *							<gw4pts@gw4pts.ampr.org>
- *
- *		This program is free software; you can redistribute it and/or
- *		modify it under the terms of the GNU General Public License
- *		as published by the Free Software Foundation; either version
- *		2 of the License, or (at your option) any later version.
- *
- *	WARNING: This move may well be temporary. This file will get merged with others RSN.
- *
- */
-#ifndef _LINUX_FCDEVICE_H
-#define _LINUX_FCDEVICE_H
-
-
-#include <linux/if_fc.h>
-
-#ifdef __KERNEL__
-extern struct net_device *alloc_fcdev(int sizeof_priv);
-#endif
-
-#endif	/* _LINUX_FCDEVICE_H */
diff --git a/ANDROID_3.4.5/include/linux/fcntl.h b/ANDROID_3.4.5/include/linux/fcntl.h
deleted file mode 100644
index f550f894..00000000
--- a/ANDROID_3.4.5/include/linux/fcntl.h
+++ /dev/null
@@ -1,79 +0,0 @@
-#ifndef _LINUX_FCNTL_H
-#define _LINUX_FCNTL_H
-
-#include <asm/fcntl.h>
-
-#define F_SETLEASE	(F_LINUX_SPECIFIC_BASE + 0)
-#define F_GETLEASE	(F_LINUX_SPECIFIC_BASE + 1)
-
-/*
- * Cancel a blocking posix lock; internal use only until we expose an
- * asynchronous lock api to userspace:
- */
-#define F_CANCELLK	(F_LINUX_SPECIFIC_BASE + 5)
-
-/* Create a file descriptor with FD_CLOEXEC set. */
-#define F_DUPFD_CLOEXEC	(F_LINUX_SPECIFIC_BASE + 6)
-
-/*
- * Request nofications on a directory.
- * See below for events that may be notified.
- */
-#define F_NOTIFY	(F_LINUX_SPECIFIC_BASE+2)
-
-/*
- * Set and get of pipe page size array
- */
-#define F_SETPIPE_SZ	(F_LINUX_SPECIFIC_BASE + 7)
-#define F_GETPIPE_SZ	(F_LINUX_SPECIFIC_BASE + 8)
-
-/*
- * Types of directory notifications that may be requested.
- */
-#define DN_ACCESS	0x00000001	/* File accessed */
-#define DN_MODIFY	0x00000002	/* File modified */
-#define DN_CREATE	0x00000004	/* File created */
-#define DN_DELETE	0x00000008	/* File removed */
-#define DN_RENAME	0x00000010	/* File renamed */
-#define DN_ATTRIB	0x00000020	/* File changed attibutes */
-#define DN_MULTISHOT	0x80000000	/* Don't remove notifier */
-
-#define AT_FDCWD		-100    /* Special value used to indicate
-                                           openat should use the current
-                                           working directory. */
-#define AT_SYMLINK_NOFOLLOW	0x100   /* Do not follow symbolic links.  */
-#define AT_REMOVEDIR		0x200   /* Remove directory instead of
-                                           unlinking file.  */
-#define AT_SYMLINK_FOLLOW	0x400   /* Follow symbolic links.  */
-#define AT_NO_AUTOMOUNT		0x800	/* Suppress terminal automount traversal */
-#define AT_EMPTY_PATH		0x1000	/* Allow empty relative pathname */
-
-#ifdef __KERNEL__
-
-#ifndef force_o_largefile
-#define force_o_largefile() (BITS_PER_LONG != 32)
-#endif
-
-#if BITS_PER_LONG == 32
-#define IS_GETLK32(cmd)		((cmd) == F_GETLK)
-#define IS_SETLK32(cmd)		((cmd) == F_SETLK)
-#define IS_SETLKW32(cmd)	((cmd) == F_SETLKW)
-#define IS_GETLK64(cmd)		((cmd) == F_GETLK64)
-#define IS_SETLK64(cmd)		((cmd) == F_SETLK64)
-#define IS_SETLKW64(cmd)	((cmd) == F_SETLKW64)
-#else
-#define IS_GETLK32(cmd)		(0)
-#define IS_SETLK32(cmd)		(0)
-#define IS_SETLKW32(cmd)	(0)
-#define IS_GETLK64(cmd)		((cmd) == F_GETLK)
-#define IS_SETLK64(cmd)		((cmd) == F_SETLK)
-#define IS_SETLKW64(cmd)	((cmd) == F_SETLKW)
-#endif /* BITS_PER_LONG == 32 */
-
-#define IS_GETLK(cmd)	(IS_GETLK32(cmd)  || IS_GETLK64(cmd))
-#define IS_SETLK(cmd)	(IS_SETLK32(cmd)  || IS_SETLK64(cmd))
-#define IS_SETLKW(cmd)	(IS_SETLKW32(cmd) || IS_SETLKW64(cmd))
-
-#endif /* __KERNEL__ */
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/fd.h b/ANDROID_3.4.5/include/linux/fd.h
deleted file mode 100644
index 72202b1b..00000000
--- a/ANDROID_3.4.5/include/linux/fd.h
+++ /dev/null
@@ -1,402 +0,0 @@
-#ifndef _LINUX_FD_H
-#define _LINUX_FD_H
-
-#include <linux/ioctl.h>
-#include <linux/compiler.h>
-
-/* New file layout: Now the ioctl definitions immediately follow the
- * definitions of the structures that they use */
-
-/*
- * Geometry
- */
-struct floppy_struct {
-	unsigned int	size,		/* nr of sectors total */
-			sect,		/* sectors per track */
-			head,		/* nr of heads */
-			track,		/* nr of tracks */
-			stretch;	/* bit 0 !=0 means double track steps */
-					/* bit 1 != 0 means swap sides */
-					/* bits 2..9 give the first sector */
-					/*  number (the LSB is flipped) */
-#define FD_STRETCH 1
-#define FD_SWAPSIDES 2
-#define FD_ZEROBASED 4
-#define FD_SECTBASEMASK 0x3FC
-#define FD_MKSECTBASE(s) (((s) ^ 1) << 2)
-#define FD_SECTBASE(floppy) ((((floppy)->stretch & FD_SECTBASEMASK) >> 2) ^ 1)
-
-	unsigned char	gap,		/* gap1 size */
-
-			rate,		/* data rate. |= 0x40 for perpendicular */
-#define FD_2M 0x4
-#define FD_SIZECODEMASK 0x38
-#define FD_SIZECODE(floppy) (((((floppy)->rate&FD_SIZECODEMASK)>> 3)+ 2) %8)
-#define FD_SECTSIZE(floppy) ( (floppy)->rate & FD_2M ? \
-			     512 : 128 << FD_SIZECODE(floppy) )
-#define FD_PERP 0x40
-
-			spec1,		/* stepping rate, head unload time */
-			fmt_gap;	/* gap2 size */
-	const char	* name; /* used only for predefined formats */
-};
-
-
-/* commands needing write access have 0x40 set */
-/* commands needing super user access have 0x80 set */
-
-#define FDCLRPRM _IO(2, 0x41)
-/* clear user-defined parameters */
-
-#define FDSETPRM _IOW(2, 0x42, struct floppy_struct) 
-#define FDSETMEDIAPRM FDSETPRM
-/* set user-defined parameters for current media */
-
-#define FDDEFPRM _IOW(2, 0x43, struct floppy_struct) 
-#define FDGETPRM _IOR(2, 0x04, struct floppy_struct)
-#define FDDEFMEDIAPRM FDDEFPRM
-#define FDGETMEDIAPRM FDGETPRM
-/* set/get disk parameters */
-
-
-#define	FDMSGON  _IO(2,0x45)
-#define	FDMSGOFF _IO(2,0x46)
-/* issue/don't issue kernel messages on media type change */
-
-
-/* 
- * Formatting (obsolete)
- */
-#define FD_FILL_BYTE 0xF6 /* format fill byte. */
-
-struct format_descr {
-	unsigned int device,head,track;
-};
-
-#define FDFMTBEG _IO(2,0x47)
-/* begin formatting a disk */
-#define	FDFMTTRK _IOW(2,0x48, struct format_descr)
-/* format the specified track */
-#define FDFMTEND _IO(2,0x49)
-/* end formatting a disk */
-
-
-/*
- * Error thresholds
- */
-struct floppy_max_errors {
-	unsigned int
-	  abort,      /* number of errors to be reached before aborting */
-	  read_track, /* maximal number of errors permitted to read an
-		       * entire track at once */
-	  reset,      /* maximal number of errors before a reset is tried */
-	  recal,      /* maximal number of errors before a recalibrate is
-		       * tried */
-
-	  /*
-	   * Threshold for reporting FDC errors to the console.
-	   * Setting this to zero may flood your screen when using
-	   * ultra cheap floppies ;-)
-	   */
-	  reporting;
-
-};
-
-#define FDSETEMSGTRESH	_IO(2,0x4a)
-/* set fdc error reporting threshold */
-
-#define FDFLUSH  _IO(2,0x4b)
-/* flush buffers for media; either for verifying media, or for
- * handling a media change without closing the file descriptor */
-
-#define FDSETMAXERRS _IOW(2, 0x4c, struct floppy_max_errors)
-#define FDGETMAXERRS _IOR(2, 0x0e, struct floppy_max_errors)
-/* set/get abortion and read_track threshold. See also floppy_drive_params
- * structure */
-
-
-typedef char floppy_drive_name[16];
-#define FDGETDRVTYP _IOR(2, 0x0f, floppy_drive_name)
-/* get drive type: 5 1/4 or 3 1/2 */
-
-
-/*
- * Drive parameters (user modifiable)
- */
-struct floppy_drive_params {
-	signed char cmos;		/* CMOS type */
-	
-	/* Spec2 is (HLD<<1 | ND), where HLD is head load time (1=2ms, 2=4 ms 
-	 * etc) and ND is set means no DMA. Hardcoded to 6 (HLD=6ms, use DMA).
-	 */
-	unsigned long max_dtr;		/* Step rate, usec */
-	unsigned long hlt;     		/* Head load/settle time, msec */
-	unsigned long hut;     		/* Head unload time (remnant of 
-					 * 8" drives) */
-	unsigned long srt;     		/* Step rate, usec */
-
-	unsigned long spinup;		/* time needed for spinup (expressed
-					 * in jiffies) */
-	unsigned long spindown;		/* timeout needed for spindown */
-	unsigned char spindown_offset;	/* decides in which position the disk
-					 * will stop */
-	unsigned char select_delay;	/* delay to wait after select */
-	unsigned char rps;		/* rotations per second */
-	unsigned char tracks;		/* maximum number of tracks */
-	unsigned long timeout;		/* timeout for interrupt requests */
-	
-	unsigned char interleave_sect;	/* if there are more sectors, use 
-					 * interleave */
-	
-	struct floppy_max_errors max_errors;
-	
-	char flags;			/* various flags, including ftd_msg */
-/*
- * Announce successful media type detection and media information loss after
- * disk changes.
- * Also used to enable/disable printing of overrun warnings.
- */
-
-#define FTD_MSG 0x10
-#define FD_BROKEN_DCL 0x20
-#define FD_DEBUG 0x02
-#define FD_SILENT_DCL_CLEAR 0x4
-#define FD_INVERTED_DCL 0x80 /* must be 0x80, because of hardware 
-				considerations */
-
-	char read_track;		/* use readtrack during probing? */
-
-/*
- * Auto-detection. Each drive type has eight formats which are
- * used in succession to try to read the disk. If the FDC cannot lock onto
- * the disk, the next format is tried. This uses the variable 'probing'.
- */
-	short autodetect[8];		/* autodetected formats */
-	
-	int checkfreq; /* how often should the drive be checked for disk 
-			* changes */
-	int native_format; /* native format of this drive */
-};
-
-enum {
-	FD_NEED_TWADDLE_BIT,	/* more magic */
-	FD_VERIFY_BIT,		/* inquire for write protection */
-	FD_DISK_NEWCHANGE_BIT,	/* change detected, and no action undertaken yet
-				 * to clear media change status */
-	FD_UNUSED_BIT,
-	FD_DISK_CHANGED_BIT,	/* disk has been changed since last i/o */
-	FD_DISK_WRITABLE_BIT	/* disk is writable */
-};
-
-#define FDSETDRVPRM _IOW(2, 0x90, struct floppy_drive_params)
-#define FDGETDRVPRM _IOR(2, 0x11, struct floppy_drive_params)
-/* set/get drive parameters */
-
-
-/*
- * Current drive state (not directly modifiable by user, readonly)
- */
-struct floppy_drive_struct {
-	unsigned long flags;
-/* values for these flags */
-#define FD_NEED_TWADDLE (1 << FD_NEED_TWADDLE_BIT)
-#define FD_VERIFY (1 << FD_VERIFY_BIT)
-#define FD_DISK_NEWCHANGE (1 << FD_DISK_NEWCHANGE_BIT)
-#define FD_DISK_CHANGED (1 << FD_DISK_CHANGED_BIT)
-#define FD_DISK_WRITABLE (1 << FD_DISK_WRITABLE_BIT)
-
-	unsigned long spinup_date;
-	unsigned long select_date;
-	unsigned long first_read_date;
-	short probed_format;
-	short track; /* current track */
-	short maxblock; /* id of highest block read */
-	short maxtrack; /* id of highest half track read */
-	int generation; /* how many diskchanges? */
-
-/*
- * (User-provided) media information is _not_ discarded after a media change
- * if the corresponding keep_data flag is non-zero. Positive values are
- * decremented after each probe.
- */
-	int keep_data;
-	
-	/* Prevent "aliased" accesses. */
-	int fd_ref;
-	int fd_device;
-	unsigned long last_checked; /* when was the drive last checked for a disk 
-			   * change? */
-	
-	char *dmabuf;
-	int bufblocks;
-};
-
-#define FDGETDRVSTAT _IOR(2, 0x12, struct floppy_drive_struct)
-#define FDPOLLDRVSTAT _IOR(2, 0x13, struct floppy_drive_struct)
-/* get drive state: GET returns the cached state, POLL polls for new state */
-
-
-/*
- * reset FDC
- */
-enum reset_mode {
-	FD_RESET_IF_NEEDED,	/* reset only if the reset flags is set */
-	FD_RESET_IF_RAWCMD,	/* obsolete */
-	FD_RESET_ALWAYS		/* reset always */
-};
-#define FDRESET _IO(2, 0x54)
-
-
-/*
- * FDC state
- */
-struct floppy_fdc_state {	
-	int spec1;		/* spec1 value last used */
-	int spec2;		/* spec2 value last used */
-	int dtr;
-	unsigned char version;	/* FDC version code */
-	unsigned char dor;
-	unsigned long address;	/* io address */
-	unsigned int rawcmd:2;
-	unsigned int reset:1;
-	unsigned int need_configure:1;
-	unsigned int perp_mode:2;
-	unsigned int has_fifo:1;
-	unsigned int driver_version;	/* version code for floppy driver */
-#define FD_DRIVER_VERSION 0x100
-/* user programs using the floppy API should use floppy_fdc_state to
- * get the version number of the floppy driver that they are running
- * on. If this version number is bigger than the one compiled into the
- * user program (the FD_DRIVER_VERSION define), it should be prepared
- * to bigger structures
- */
-
-	unsigned char track[4];
-	/* Position of the heads of the 4 units attached to this FDC,
-	 * as stored on the FDC. In the future, the position as stored
-	 * on the FDC might not agree with the actual physical
-	 * position of these drive heads. By allowing such
-	 * disagreement, it will be possible to reset the FDC without
-	 * incurring the expensive cost of repositioning all heads.
-	 * Right now, these positions are hard wired to 0. */
-
-};
-
-#define FDGETFDCSTAT _IOR(2, 0x15, struct floppy_fdc_state)
-
-
-/*
- * Asynchronous Write error tracking
- */
-struct floppy_write_errors {
-	/* Write error logging.
-	 *
-	 * These fields can be cleared with the FDWERRORCLR ioctl.
-	 * Only writes that were attempted but failed due to a physical media
-	 * error are logged.  write(2) calls that fail and return an error code
-	 * to the user process are not counted.
-	 */
-
-	unsigned int write_errors;  /* number of physical write errors 
-				     * encountered */
-	
-	/* position of first and last write errors */
-	unsigned long first_error_sector;
-	int           first_error_generation;
-	unsigned long last_error_sector;
-	int           last_error_generation;
-	
-	unsigned int badness; /* highest retry count for a read or write 
-			       * operation */
-};
-
-#define FDWERRORCLR  _IO(2, 0x56)
-/* clear write error and badness information */
-#define FDWERRORGET  _IOR(2, 0x17, struct floppy_write_errors)
-/* get write error and badness information */
-
-
-/*
- * Raw commands
- */
-/* new interface flag: now we can do them in batches */
-#define FDHAVEBATCHEDRAWCMD
-
-struct floppy_raw_cmd {
-	unsigned int flags;
-#define FD_RAW_READ 1
-#define FD_RAW_WRITE 2
-#define FD_RAW_NO_MOTOR 4
-#define FD_RAW_DISK_CHANGE 4 /* out: disk change flag was set */
-#define FD_RAW_INTR 8    /* wait for an interrupt */
-#define FD_RAW_SPIN 0x10 /* spin up the disk for this command */
-#define FD_RAW_NO_MOTOR_AFTER 0x20 /* switch the motor off after command 
-				    * completion */
-#define FD_RAW_NEED_DISK 0x40  /* this command needs a disk to be present */
-#define FD_RAW_NEED_SEEK 0x80  /* this command uses an implied seek (soft) */
-
-/* more "in" flags */
-#define FD_RAW_MORE 0x100  /* more records follow */
-#define FD_RAW_STOP_IF_FAILURE 0x200 /* stop if we encounter a failure */
-#define FD_RAW_STOP_IF_SUCCESS 0x400 /* stop if command successful */
-#define FD_RAW_SOFTFAILURE 0x800 /* consider the return value for failure
-				  * detection too */
-
-/* more "out" flags */
-#define FD_RAW_FAILURE 0x10000 /* command sent to fdc, fdc returned error */
-#define FD_RAW_HARDFAILURE 0x20000 /* fdc had to be reset, or timed out */
-
-	void __user *data;
-	char *kernel_data; /* location of data buffer in the kernel */
-	struct floppy_raw_cmd *next; /* used for chaining of raw cmd's 
-				      * within the kernel */
-	long length; /* in: length of dma transfer. out: remaining bytes */
-	long phys_length; /* physical length, if different from dma length */
-	int buffer_length; /* length of allocated buffer */
-
-	unsigned char rate;
-	unsigned char cmd_count;
-	unsigned char cmd[16];
-	unsigned char reply_count;
-	unsigned char reply[16];
-	int track;
-	int resultcode;
-
-	int reserved1;
-	int reserved2;
-};
-
-#define FDRAWCMD _IO(2, 0x58)
-/* send a raw command to the fdc. Structure size not included, because of
- * batches */
-
-#define FDTWADDLE _IO(2, 0x59)
-/* flicker motor-on bit before reading a sector. Experimental */
-
-
-#define FDEJECT _IO(2, 0x5a)
-/* eject the disk */
-
-
-#ifdef __KERNEL__
-#ifdef CONFIG_COMPAT
-#include <linux/compat.h>
-
-struct compat_floppy_struct {
-	compat_uint_t	size;
-	compat_uint_t	sect;
-	compat_uint_t	head;
-	compat_uint_t	track;
-	compat_uint_t	stretch;
-	unsigned char	gap;
-	unsigned char	rate;
-	unsigned char	spec1;
-	unsigned char	fmt_gap;
-	const compat_caddr_t name;
-};
-
-#define FDGETPRM32 _IOR(2, 0x04, struct compat_floppy_struct)
-#endif
-#endif
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/fddidevice.h b/ANDROID_3.4.5/include/linux/fddidevice.h
deleted file mode 100644
index 155bafd9..00000000
--- a/ANDROID_3.4.5/include/linux/fddidevice.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * INET		An implementation of the TCP/IP protocol suite for the LINUX
- *		operating system.  INET is implemented using the BSD Socket
- *		interface as the means of communication with the user level.
- *
- *		Definitions for the FDDI handlers.
- *
- * Version:	@(#)fddidevice.h	1.0.0	08/12/96
- *
- * Author:	Lawrence V. Stefani, <stefani@lkg.dec.com>
- *
- *		fddidevice.h is based on previous trdevice.h work by
- *			Ross Biro
- *			Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
- *			Alan Cox, <gw4pts@gw4pts.ampr.org>
- *
- *		This program is free software; you can redistribute it and/or
- *		modify it under the terms of the GNU General Public License
- *		as published by the Free Software Foundation; either version
- *		2 of the License, or (at your option) any later version.
- */
-#ifndef _LINUX_FDDIDEVICE_H
-#define _LINUX_FDDIDEVICE_H
-
-#include <linux/if_fddi.h>
-
-#ifdef __KERNEL__
-extern __be16	fddi_type_trans(struct sk_buff *skb,
-				struct net_device *dev);
-extern int fddi_change_mtu(struct net_device *dev, int new_mtu);
-extern struct net_device *alloc_fddidev(int sizeof_priv);
-#endif
-
-#endif	/* _LINUX_FDDIDEVICE_H */
diff --git a/ANDROID_3.4.5/include/linux/fdreg.h b/ANDROID_3.4.5/include/linux/fdreg.h
deleted file mode 100644
index 61ce6416..00000000
--- a/ANDROID_3.4.5/include/linux/fdreg.h
+++ /dev/null
@@ -1,137 +0,0 @@
-#ifndef _LINUX_FDREG_H
-#define _LINUX_FDREG_H
-/*
- * This file contains some defines for the floppy disk controller.
- * Various sources. Mostly "IBM Microcomputers: A Programmers
- * Handbook", Sanches and Canton.
- */
-
-#ifdef FDPATCHES
-#define FD_IOPORT fdc_state[fdc].address
-#else
-/* It would be a lot saner just to force fdc_state[fdc].address to always
-   be set ! FIXME */
-#define FD_IOPORT 0x3f0
-#endif
-
-/* Fd controller regs. S&C, about page 340 */
-#define FD_STATUS	(4 + FD_IOPORT )
-#define FD_DATA		(5 + FD_IOPORT )
-
-/* Digital Output Register */
-#define FD_DOR		(2 + FD_IOPORT )
-
-/* Digital Input Register (read) */
-#define FD_DIR		(7 + FD_IOPORT )
-
-/* Diskette Control Register (write)*/
-#define FD_DCR		(7 + FD_IOPORT )
-
-/* Bits of main status register */
-#define STATUS_BUSYMASK	0x0F		/* drive busy mask */
-#define STATUS_BUSY	0x10		/* FDC busy */
-#define STATUS_DMA	0x20		/* 0- DMA mode */
-#define STATUS_DIR	0x40		/* 0- cpu->fdc */
-#define STATUS_READY	0x80		/* Data reg ready */
-
-/* Bits of FD_ST0 */
-#define ST0_DS		0x03		/* drive select mask */
-#define ST0_HA		0x04		/* Head (Address) */
-#define ST0_NR		0x08		/* Not Ready */
-#define ST0_ECE		0x10		/* Equipment check error */
-#define ST0_SE		0x20		/* Seek end */
-#define ST0_INTR	0xC0		/* Interrupt code mask */
-
-/* Bits of FD_ST1 */
-#define ST1_MAM		0x01		/* Missing Address Mark */
-#define ST1_WP		0x02		/* Write Protect */
-#define ST1_ND		0x04		/* No Data - unreadable */
-#define ST1_OR		0x10		/* OverRun */
-#define ST1_CRC		0x20		/* CRC error in data or addr */
-#define ST1_EOC		0x80		/* End Of Cylinder */
-
-/* Bits of FD_ST2 */
-#define ST2_MAM		0x01		/* Missing Address Mark (again) */
-#define ST2_BC		0x02		/* Bad Cylinder */
-#define ST2_SNS		0x04		/* Scan Not Satisfied */
-#define ST2_SEH		0x08		/* Scan Equal Hit */
-#define ST2_WC		0x10		/* Wrong Cylinder */
-#define ST2_CRC		0x20		/* CRC error in data field */
-#define ST2_CM		0x40		/* Control Mark = deleted */
-
-/* Bits of FD_ST3 */
-#define ST3_HA		0x04		/* Head (Address) */
-#define ST3_DS		0x08		/* drive is double-sided */
-#define ST3_TZ		0x10		/* Track Zero signal (1=track 0) */
-#define ST3_RY		0x20		/* drive is ready */
-#define ST3_WP		0x40		/* Write Protect */
-#define ST3_FT		0x80		/* Drive Fault */
-
-/* Values for FD_COMMAND */
-#define FD_RECALIBRATE		0x07	/* move to track 0 */
-#define FD_SEEK			0x0F	/* seek track */
-#define FD_READ			0xE6	/* read with MT, MFM, SKip deleted */
-#define FD_WRITE		0xC5	/* write with MT, MFM */
-#define FD_SENSEI		0x08	/* Sense Interrupt Status */
-#define FD_SPECIFY		0x03	/* specify HUT etc */
-#define FD_FORMAT		0x4D	/* format one track */
-#define FD_VERSION		0x10	/* get version code */
-#define FD_CONFIGURE		0x13	/* configure FIFO operation */
-#define FD_PERPENDICULAR	0x12	/* perpendicular r/w mode */
-#define FD_GETSTATUS		0x04	/* read ST3 */
-#define FD_DUMPREGS		0x0E	/* dump the contents of the fdc regs */
-#define FD_READID		0xEA	/* prints the header of a sector */
-#define FD_UNLOCK		0x14	/* Fifo config unlock */
-#define FD_LOCK			0x94	/* Fifo config lock */
-#define FD_RSEEK_OUT		0x8f	/* seek out (i.e. to lower tracks) */
-#define FD_RSEEK_IN		0xcf	/* seek in (i.e. to higher tracks) */
-
-/* the following commands are new in the 82078. They are not used in the
- * floppy driver, except the first three. These commands may be useful for apps
- * which use the FDRAWCMD interface. For doc, get the 82078 spec sheets at
- * http://www.intel.com/design/archives/periphrl/docs/29046803.htm */
-
-#define FD_PARTID		0x18	/* part id ("extended" version cmd) */
-#define FD_SAVE			0x2e	/* save fdc regs for later restore */
-#define FD_DRIVESPEC		0x8e	/* drive specification: Access to the
-					 * 2 Mbps data transfer rate for tape
-					 * drives */
-
-#define FD_RESTORE		0x4e    /* later restore */
-#define FD_POWERDOWN		0x27	/* configure FDC's powersave features */
-#define FD_FORMAT_N_WRITE	0xef    /* format and write in one go. */
-#define FD_OPTION		0x33	/* ISO format (which is a clean way to
-					 * pack more sectors on a track) */
-
-/* DMA commands */
-#define DMA_READ	0x46
-#define DMA_WRITE	0x4A
-
-/* FDC version return types */
-#define FDC_NONE	0x00
-#define FDC_UNKNOWN	0x10	/* DO NOT USE THIS TYPE EXCEPT IF IDENTIFICATION
-				   FAILS EARLY */
-#define FDC_8272A	0x20	/* Intel 8272a, NEC 765 */
-#define FDC_765ED	0x30	/* Non-Intel 1MB-compatible FDC, can't detect */
-#define FDC_82072	0x40	/* Intel 82072; 8272a + FIFO + DUMPREGS */
-#define FDC_82072A	0x45	/* 82072A (on Sparcs) */
-#define FDC_82077_ORIG	0x51	/* Original version of 82077AA, sans LOCK */
-#define FDC_82077	0x52	/* 82077AA-1 */
-#define FDC_82078_UNKN	0x5f	/* Unknown 82078 variant */
-#define FDC_82078	0x60	/* 44pin 82078 or 64pin 82078SL */
-#define FDC_82078_1	0x61	/* 82078-1 (2Mbps fdc) */
-#define FDC_S82078B	0x62	/* S82078B (first seen on Adaptec AVA-2825 VLB
-				 * SCSI/EIDE/Floppy controller) */
-#define FDC_87306	0x63	/* National Semiconductor PC 87306 */
-
-/*
- * Beware: the fdc type list is roughly sorted by increasing features.
- * Presence of features is tested by comparing the FDC version id with the
- * "oldest" version that has the needed feature.
- * If during FDC detection, an obscure test fails late in the sequence, don't
- * assign FDC_UNKNOWN. Else the FDC will be treated as a dumb 8272a, or worse.
- * This is especially true if the tests are unneeded.
- */
-
-#define FD_RESET_DELAY 20
-#endif
diff --git a/ANDROID_3.4.5/include/linux/fdtable.h b/ANDROID_3.4.5/include/linux/fdtable.h
deleted file mode 100644
index 158a41ee..00000000
--- a/ANDROID_3.4.5/include/linux/fdtable.h
+++ /dev/null
@@ -1,130 +0,0 @@
-/*
- * descriptor table internals; you almost certainly want file.h instead.
- */
-
-#ifndef __LINUX_FDTABLE_H
-#define __LINUX_FDTABLE_H
-
-#include <linux/posix_types.h>
-#include <linux/compiler.h>
-#include <linux/spinlock.h>
-#include <linux/rcupdate.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/fs.h>
-
-#include <linux/atomic.h>
-
-/*
- * The default fd array needs to be at least BITS_PER_LONG,
- * as this is the granularity returned by copy_fdset().
- */
-#define NR_OPEN_DEFAULT BITS_PER_LONG
-
-struct fdtable {
-	unsigned int max_fds;
-	struct file __rcu **fd;      /* current fd array */
-	unsigned long *close_on_exec;
-	unsigned long *open_fds;
-	struct rcu_head rcu;
-	struct fdtable *next;
-};
-
-static inline void __set_close_on_exec(int fd, struct fdtable *fdt)
-{
-	__set_bit(fd, fdt->close_on_exec);
-}
-
-static inline void __clear_close_on_exec(int fd, struct fdtable *fdt)
-{
-	__clear_bit(fd, fdt->close_on_exec);
-}
-
-static inline bool close_on_exec(int fd, const struct fdtable *fdt)
-{
-	return test_bit(fd, fdt->close_on_exec);
-}
-
-static inline void __set_open_fd(int fd, struct fdtable *fdt)
-{
-	__set_bit(fd, fdt->open_fds);
-}
-
-static inline void __clear_open_fd(int fd, struct fdtable *fdt)
-{
-	__clear_bit(fd, fdt->open_fds);
-}
-
-static inline bool fd_is_open(int fd, const struct fdtable *fdt)
-{
-	return test_bit(fd, fdt->open_fds);
-}
-
-/*
- * Open file table structure
- */
-struct files_struct {
-  /*
-   * read mostly part
-   */
-	atomic_t count;
-	struct fdtable __rcu *fdt;
-	struct fdtable fdtab;
-  /*
-   * written part on a separate cache line in SMP
-   */
-	spinlock_t file_lock ____cacheline_aligned_in_smp;
-	int next_fd;
-	unsigned long close_on_exec_init[1];
-	unsigned long open_fds_init[1];
-	struct file __rcu * fd_array[NR_OPEN_DEFAULT];
-};
-
-#define rcu_dereference_check_fdtable(files, fdtfd) \
-	(rcu_dereference_check((fdtfd), \
-			       lockdep_is_held(&(files)->file_lock) || \
-			       atomic_read(&(files)->count) == 1 || \
-			       rcu_my_thread_group_empty()))
-
-#define files_fdtable(files) \
-		(rcu_dereference_check_fdtable((files), (files)->fdt))
-
-struct file_operations;
-struct vfsmount;
-struct dentry;
-
-extern int expand_files(struct files_struct *, int nr);
-extern void free_fdtable_rcu(struct rcu_head *rcu);
-extern void __init files_defer_init(void);
-
-static inline void free_fdtable(struct fdtable *fdt)
-{
-	call_rcu(&fdt->rcu, free_fdtable_rcu);
-}
-
-static inline struct file * fcheck_files(struct files_struct *files, unsigned int fd)
-{
-	struct file * file = NULL;
-	struct fdtable *fdt = files_fdtable(files);
-
-	if (fd < fdt->max_fds)
-		file = rcu_dereference_check_fdtable(files, fdt->fd[fd]);
-	return file;
-}
-
-/*
- * Check whether the specified fd has an open file.
- */
-#define fcheck(fd)	fcheck_files(current->files, fd)
-
-struct task_struct;
-
-struct files_struct *get_files_struct(struct task_struct *);
-void put_files_struct(struct files_struct *fs);
-void reset_files_struct(struct files_struct *);
-int unshare_files(struct files_struct **);
-struct files_struct *dup_fd(struct files_struct *, int *);
-
-extern struct kmem_cache *files_cachep;
-
-#endif /* __LINUX_FDTABLE_H */
diff --git a/ANDROID_3.4.5/include/linux/fec.h b/ANDROID_3.4.5/include/linux/fec.h
deleted file mode 100644
index bcff455d..00000000
--- a/ANDROID_3.4.5/include/linux/fec.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/* include/linux/fec.h
- *
- * Copyright (c) 2009 Orex Computed Radiography
- *   Baruch Siach <baruch@tkos.co.il>
- *
- * Copyright (C) 2010 Freescale Semiconductor, Inc.
- *
- * Header file for the FEC platform data
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __LINUX_FEC_H__
-#define __LINUX_FEC_H__
-
-#include <linux/phy.h>
-
-struct fec_platform_data {
-	phy_interface_t phy;
-	unsigned char mac[ETH_ALEN];
-};
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/fib_rules.h b/ANDROID_3.4.5/include/linux/fib_rules.h
deleted file mode 100644
index 51da65b6..00000000
--- a/ANDROID_3.4.5/include/linux/fib_rules.h
+++ /dev/null
@@ -1,72 +0,0 @@
-#ifndef __LINUX_FIB_RULES_H
-#define __LINUX_FIB_RULES_H
-
-#include <linux/types.h>
-#include <linux/rtnetlink.h>
-
-/* rule is permanent, and cannot be deleted */
-#define FIB_RULE_PERMANENT	0x00000001
-#define FIB_RULE_INVERT		0x00000002
-#define FIB_RULE_UNRESOLVED	0x00000004
-#define FIB_RULE_IIF_DETACHED	0x00000008
-#define FIB_RULE_DEV_DETACHED	FIB_RULE_IIF_DETACHED
-#define FIB_RULE_OIF_DETACHED	0x00000010
-
-/* try to find source address in routing lookups */
-#define FIB_RULE_FIND_SADDR	0x00010000
-
-struct fib_rule_hdr {
-	__u8		family;
-	__u8		dst_len;
-	__u8		src_len;
-	__u8		tos;
-
-	__u8		table;
-	__u8		res1;	/* reserved */
-	__u8		res2;	/* reserved */
-	__u8		action;
-
-	__u32		flags;
-};
-
-enum {
-	FRA_UNSPEC,
-	FRA_DST,	/* destination address */
-	FRA_SRC,	/* source address */
-	FRA_IIFNAME,	/* interface name */
-#define FRA_IFNAME	FRA_IIFNAME
-	FRA_GOTO,	/* target to jump to (FR_ACT_GOTO) */
-	FRA_UNUSED2,
-	FRA_PRIORITY,	/* priority/preference */
-	FRA_UNUSED3,
-	FRA_UNUSED4,
-	FRA_UNUSED5,
-	FRA_FWMARK,	/* mark */
-	FRA_FLOW,	/* flow/class id */
-	FRA_UNUSED6,
-	FRA_UNUSED7,
-	FRA_UNUSED8,
-	FRA_TABLE,	/* Extended table id */
-	FRA_FWMASK,	/* mask for netfilter mark */
-	FRA_OIFNAME,
-	__FRA_MAX
-};
-
-#define FRA_MAX (__FRA_MAX - 1)
-
-enum {
-	FR_ACT_UNSPEC,
-	FR_ACT_TO_TBL,		/* Pass to fixed table */
-	FR_ACT_GOTO,		/* Jump to another rule */
-	FR_ACT_NOP,		/* No operation */
-	FR_ACT_RES3,
-	FR_ACT_RES4,
-	FR_ACT_BLACKHOLE,	/* Drop without notification */
-	FR_ACT_UNREACHABLE,	/* Drop with ENETUNREACH */
-	FR_ACT_PROHIBIT,	/* Drop with EACCES */
-	__FR_ACT_MAX,
-};
-
-#define FR_ACT_MAX (__FR_ACT_MAX - 1)
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/fiemap.h b/ANDROID_3.4.5/include/linux/fiemap.h
deleted file mode 100644
index d830747f..00000000
--- a/ANDROID_3.4.5/include/linux/fiemap.h
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * FS_IOC_FIEMAP ioctl infrastructure.
- *
- * Some portions copyright (C) 2007 Cluster File Systems, Inc
- *
- * Authors: Mark Fasheh <mfasheh@suse.com>
- *          Kalpak Shah <kalpak.shah@sun.com>
- *          Andreas Dilger <adilger@sun.com>
- */
-
-#ifndef _LINUX_FIEMAP_H
-#define _LINUX_FIEMAP_H
-
-#include <linux/types.h>
-
-struct fiemap_extent {
-	__u64 fe_logical;  /* logical offset in bytes for the start of
-			    * the extent from the beginning of the file */
-	__u64 fe_physical; /* physical offset in bytes for the start
-			    * of the extent from the beginning of the disk */
-	__u64 fe_length;   /* length in bytes for this extent */
-	__u64 fe_reserved64[2];
-	__u32 fe_flags;    /* FIEMAP_EXTENT_* flags for this extent */
-	__u32 fe_reserved[3];
-};
-
-struct fiemap {
-	__u64 fm_start;		/* logical offset (inclusive) at
-				 * which to start mapping (in) */
-	__u64 fm_length;	/* logical length of mapping which
-				 * userspace wants (in) */
-	__u32 fm_flags;		/* FIEMAP_FLAG_* flags for request (in/out) */
-	__u32 fm_mapped_extents;/* number of extents that were mapped (out) */
-	__u32 fm_extent_count;  /* size of fm_extents array (in) */
-	__u32 fm_reserved;
-	struct fiemap_extent fm_extents[0]; /* array of mapped extents (out) */
-};
-
-#define FIEMAP_MAX_OFFSET	(~0ULL)
-
-#define FIEMAP_FLAG_SYNC	0x00000001 /* sync file data before map */
-#define FIEMAP_FLAG_XATTR	0x00000002 /* map extended attribute tree */
-
-#define FIEMAP_FLAGS_COMPAT	(FIEMAP_FLAG_SYNC | FIEMAP_FLAG_XATTR)
-
-#define FIEMAP_EXTENT_LAST		0x00000001 /* Last extent in file. */
-#define FIEMAP_EXTENT_UNKNOWN		0x00000002 /* Data location unknown. */
-#define FIEMAP_EXTENT_DELALLOC		0x00000004 /* Location still pending.
-						    * Sets EXTENT_UNKNOWN. */
-#define FIEMAP_EXTENT_ENCODED		0x00000008 /* Data can not be read
-						    * while fs is unmounted */
-#define FIEMAP_EXTENT_DATA_ENCRYPTED	0x00000080 /* Data is encrypted by fs.
-						    * Sets EXTENT_NO_BYPASS. */
-#define FIEMAP_EXTENT_NOT_ALIGNED	0x00000100 /* Extent offsets may not be
-						    * block aligned. */
-#define FIEMAP_EXTENT_DATA_INLINE	0x00000200 /* Data mixed with metadata.
-						    * Sets EXTENT_NOT_ALIGNED.*/
-#define FIEMAP_EXTENT_DATA_TAIL		0x00000400 /* Multiple files in block.
-						    * Sets EXTENT_NOT_ALIGNED.*/
-#define FIEMAP_EXTENT_UNWRITTEN		0x00000800 /* Space allocated, but
-						    * no data (i.e. zero). */
-#define FIEMAP_EXTENT_MERGED		0x00001000 /* File does not natively
-						    * support extents. Result
-						    * merged for efficiency. */
-#define FIEMAP_EXTENT_SHARED		0x00002000 /* Space shared with other
-						    * files. */
-
-#endif /* _LINUX_FIEMAP_H */
diff --git a/ANDROID_3.4.5/include/linux/file.h b/ANDROID_3.4.5/include/linux/file.h
deleted file mode 100644
index 58bf158c..00000000
--- a/ANDROID_3.4.5/include/linux/file.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * Wrapper functions for accessing the file_struct fd array.
- */
-
-#ifndef __LINUX_FILE_H
-#define __LINUX_FILE_H
-
-#include <linux/compiler.h>
-#include <linux/types.h>
-#include <linux/posix_types.h>
-
-struct file;
-
-extern void fput(struct file *);
-
-struct file_operations;
-struct vfsmount;
-struct dentry;
-struct path;
-extern struct file *alloc_file(struct path *, fmode_t mode,
-	const struct file_operations *fop);
-
-static inline void fput_light(struct file *file, int fput_needed)
-{
-	if (fput_needed)
-		fput(file);
-}
-
-extern struct file *fget(unsigned int fd);
-extern struct file *fget_light(unsigned int fd, int *fput_needed);
-extern struct file *fget_raw(unsigned int fd);
-extern struct file *fget_raw_light(unsigned int fd, int *fput_needed);
-extern void set_close_on_exec(unsigned int fd, int flag);
-extern void put_filp(struct file *);
-extern int alloc_fd(unsigned start, unsigned flags);
-extern int get_unused_fd(void);
-#define get_unused_fd_flags(flags) alloc_fd(0, (flags))
-extern void put_unused_fd(unsigned int fd);
-
-extern void fd_install(unsigned int fd, struct file *file);
-
-#endif /* __LINUX_FILE_H */
diff --git a/ANDROID_3.4.5/include/linux/filter.h b/ANDROID_3.4.5/include/linux/filter.h
deleted file mode 100644
index 8eeb205f..00000000
--- a/ANDROID_3.4.5/include/linux/filter.h
+++ /dev/null
@@ -1,235 +0,0 @@
-/*
- * Linux Socket Filter Data Structures
- */
-
-#ifndef __LINUX_FILTER_H__
-#define __LINUX_FILTER_H__
-
-#include <linux/compiler.h>
-#include <linux/types.h>
-
-#ifdef __KERNEL__
-#include <linux/atomic.h>
-#endif
-
-/*
- * Current version of the filter code architecture.
- */
-#define BPF_MAJOR_VERSION 1
-#define BPF_MINOR_VERSION 1
-
-/*
- *	Try and keep these values and structures similar to BSD, especially
- *	the BPF code definitions which need to match so you can share filters
- */
- 
-struct sock_filter {	/* Filter block */
-	__u16	code;   /* Actual filter code */
-	__u8	jt;	/* Jump true */
-	__u8	jf;	/* Jump false */
-	__u32	k;      /* Generic multiuse field */
-};
-
-struct sock_fprog {	/* Required for SO_ATTACH_FILTER. */
-	unsigned short		len;	/* Number of filter blocks */
-	struct sock_filter __user *filter;
-};
-
-/*
- * Instruction classes
- */
-
-#define BPF_CLASS(code) ((code) & 0x07)
-#define         BPF_LD          0x00
-#define         BPF_LDX         0x01
-#define         BPF_ST          0x02
-#define         BPF_STX         0x03
-#define         BPF_ALU         0x04
-#define         BPF_JMP         0x05
-#define         BPF_RET         0x06
-#define         BPF_MISC        0x07
-
-/* ld/ldx fields */
-#define BPF_SIZE(code)  ((code) & 0x18)
-#define         BPF_W           0x00
-#define         BPF_H           0x08
-#define         BPF_B           0x10
-#define BPF_MODE(code)  ((code) & 0xe0)
-#define         BPF_IMM         0x00
-#define         BPF_ABS         0x20
-#define         BPF_IND         0x40
-#define         BPF_MEM         0x60
-#define         BPF_LEN         0x80
-#define         BPF_MSH         0xa0
-
-/* alu/jmp fields */
-#define BPF_OP(code)    ((code) & 0xf0)
-#define         BPF_ADD         0x00
-#define         BPF_SUB         0x10
-#define         BPF_MUL         0x20
-#define         BPF_DIV         0x30
-#define         BPF_OR          0x40
-#define         BPF_AND         0x50
-#define         BPF_LSH         0x60
-#define         BPF_RSH         0x70
-#define         BPF_NEG         0x80
-#define         BPF_JA          0x00
-#define         BPF_JEQ         0x10
-#define         BPF_JGT         0x20
-#define         BPF_JGE         0x30
-#define         BPF_JSET        0x40
-#define BPF_SRC(code)   ((code) & 0x08)
-#define         BPF_K           0x00
-#define         BPF_X           0x08
-
-/* ret - BPF_K and BPF_X also apply */
-#define BPF_RVAL(code)  ((code) & 0x18)
-#define         BPF_A           0x10
-
-/* misc */
-#define BPF_MISCOP(code) ((code) & 0xf8)
-#define         BPF_TAX         0x00
-#define         BPF_TXA         0x80
-
-#ifndef BPF_MAXINSNS
-#define BPF_MAXINSNS 4096
-#endif
-
-/*
- * Macros for filter block array initializers.
- */
-#ifndef BPF_STMT
-#define BPF_STMT(code, k) { (unsigned short)(code), 0, 0, k }
-#endif
-#ifndef BPF_JUMP
-#define BPF_JUMP(code, k, jt, jf) { (unsigned short)(code), jt, jf, k }
-#endif
-
-/*
- * Number of scratch memory words for: BPF_ST and BPF_STX
- */
-#define BPF_MEMWORDS 16
-
-/* RATIONALE. Negative offsets are invalid in BPF.
-   We use them to reference ancillary data.
-   Unlike introduction new instructions, it does not break
-   existing compilers/optimizers.
- */
-#define SKF_AD_OFF    (-0x1000)
-#define SKF_AD_PROTOCOL 0
-#define SKF_AD_PKTTYPE 	4
-#define SKF_AD_IFINDEX 	8
-#define SKF_AD_NLATTR	12
-#define SKF_AD_NLATTR_NEST	16
-#define SKF_AD_MARK 	20
-#define SKF_AD_QUEUE	24
-#define SKF_AD_HATYPE	28
-#define SKF_AD_RXHASH	32
-#define SKF_AD_CPU	36
-#define SKF_AD_MAX	40
-#define SKF_NET_OFF   (-0x100000)
-#define SKF_LL_OFF    (-0x200000)
-
-#ifdef __KERNEL__
-
-struct sk_buff;
-struct sock;
-
-struct sk_filter
-{
-	atomic_t		refcnt;
-	unsigned int         	len;	/* Number of filter blocks */
-	unsigned int		(*bpf_func)(const struct sk_buff *skb,
-					    const struct sock_filter *filter);
-	struct rcu_head		rcu;
-	struct sock_filter     	insns[0];
-};
-
-static inline unsigned int sk_filter_len(const struct sk_filter *fp)
-{
-	return fp->len * sizeof(struct sock_filter) + sizeof(*fp);
-}
-
-extern int sk_filter(struct sock *sk, struct sk_buff *skb);
-extern unsigned int sk_run_filter(const struct sk_buff *skb,
-				  const struct sock_filter *filter);
-extern int sk_attach_filter(struct sock_fprog *fprog, struct sock *sk);
-extern int sk_detach_filter(struct sock *sk);
-extern int sk_chk_filter(struct sock_filter *filter, unsigned int flen);
-
-#ifdef CONFIG_BPF_JIT
-extern void bpf_jit_compile(struct sk_filter *fp);
-extern void bpf_jit_free(struct sk_filter *fp);
-#define SK_RUN_FILTER(FILTER, SKB) (*FILTER->bpf_func)(SKB, FILTER->insns)
-#else
-static inline void bpf_jit_compile(struct sk_filter *fp)
-{
-}
-static inline void bpf_jit_free(struct sk_filter *fp)
-{
-}
-#define SK_RUN_FILTER(FILTER, SKB) sk_run_filter(SKB, FILTER->insns)
-#endif
-
-enum {
-	BPF_S_RET_K = 1,
-	BPF_S_RET_A,
-	BPF_S_ALU_ADD_K,
-	BPF_S_ALU_ADD_X,
-	BPF_S_ALU_SUB_K,
-	BPF_S_ALU_SUB_X,
-	BPF_S_ALU_MUL_K,
-	BPF_S_ALU_MUL_X,
-	BPF_S_ALU_DIV_X,
-	BPF_S_ALU_AND_K,
-	BPF_S_ALU_AND_X,
-	BPF_S_ALU_OR_K,
-	BPF_S_ALU_OR_X,
-	BPF_S_ALU_LSH_K,
-	BPF_S_ALU_LSH_X,
-	BPF_S_ALU_RSH_K,
-	BPF_S_ALU_RSH_X,
-	BPF_S_ALU_NEG,
-	BPF_S_LD_W_ABS,
-	BPF_S_LD_H_ABS,
-	BPF_S_LD_B_ABS,
-	BPF_S_LD_W_LEN,
-	BPF_S_LD_W_IND,
-	BPF_S_LD_H_IND,
-	BPF_S_LD_B_IND,
-	BPF_S_LD_IMM,
-	BPF_S_LDX_W_LEN,
-	BPF_S_LDX_B_MSH,
-	BPF_S_LDX_IMM,
-	BPF_S_MISC_TAX,
-	BPF_S_MISC_TXA,
-	BPF_S_ALU_DIV_K,
-	BPF_S_LD_MEM,
-	BPF_S_LDX_MEM,
-	BPF_S_ST,
-	BPF_S_STX,
-	BPF_S_JMP_JA,
-	BPF_S_JMP_JEQ_K,
-	BPF_S_JMP_JEQ_X,
-	BPF_S_JMP_JGE_K,
-	BPF_S_JMP_JGE_X,
-	BPF_S_JMP_JGT_K,
-	BPF_S_JMP_JGT_X,
-	BPF_S_JMP_JSET_K,
-	BPF_S_JMP_JSET_X,
-	/* Ancillary data */
-	BPF_S_ANC_PROTOCOL,
-	BPF_S_ANC_PKTTYPE,
-	BPF_S_ANC_IFINDEX,
-	BPF_S_ANC_NLATTR,
-	BPF_S_ANC_NLATTR_NEST,
-	BPF_S_ANC_MARK,
-	BPF_S_ANC_QUEUE,
-	BPF_S_ANC_HATYPE,
-	BPF_S_ANC_RXHASH,
-	BPF_S_ANC_CPU,
-};
-
-#endif /* __KERNEL__ */
-
-#endif /* __LINUX_FILTER_H__ */
diff --git a/ANDROID_3.4.5/include/linux/fips.h b/ANDROID_3.4.5/include/linux/fips.h
deleted file mode 100644
index f8fb07b0..00000000
--- a/ANDROID_3.4.5/include/linux/fips.h
+++ /dev/null
@@ -1,10 +0,0 @@
-#ifndef _FIPS_H
-#define _FIPS_H
-
-#ifdef CONFIG_CRYPTO_FIPS
-extern int fips_enabled;
-#else
-#define fips_enabled 0
-#endif
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/firewire-cdev.h b/ANDROID_3.4.5/include/linux/firewire-cdev.h
deleted file mode 100644
index d5003695..00000000
--- a/ANDROID_3.4.5/include/linux/firewire-cdev.h
+++ /dev/null
@@ -1,1039 +0,0 @@
-/*
- * Char device interface.
- *
- * Copyright (C) 2005-2007  Kristian Hoegsberg <krh@bitplanet.net>
- *
- * Permission is hereby granted, free of charge, to any person obtaining a
- * copy of this software and associated documentation files (the "Software"),
- * to deal in the Software without restriction, including without limitation
- * the rights to use, copy, modify, merge, publish, distribute, sublicense,
- * and/or sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice (including the next
- * paragraph) shall be included in all copies or substantial portions of the
- * Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
- * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR
- * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
- * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
- * DEALINGS IN THE SOFTWARE.
- */
-
-#ifndef _LINUX_FIREWIRE_CDEV_H
-#define _LINUX_FIREWIRE_CDEV_H
-
-#include <linux/ioctl.h>
-#include <linux/types.h>
-#include <linux/firewire-constants.h>
-
-/* available since kernel version 2.6.22 */
-#define FW_CDEV_EVENT_BUS_RESET				0x00
-#define FW_CDEV_EVENT_RESPONSE				0x01
-#define FW_CDEV_EVENT_REQUEST				0x02
-#define FW_CDEV_EVENT_ISO_INTERRUPT			0x03
-
-/* available since kernel version 2.6.30 */
-#define FW_CDEV_EVENT_ISO_RESOURCE_ALLOCATED		0x04
-#define FW_CDEV_EVENT_ISO_RESOURCE_DEALLOCATED		0x05
-
-/* available since kernel version 2.6.36 */
-#define FW_CDEV_EVENT_REQUEST2				0x06
-#define FW_CDEV_EVENT_PHY_PACKET_SENT			0x07
-#define FW_CDEV_EVENT_PHY_PACKET_RECEIVED		0x08
-#define FW_CDEV_EVENT_ISO_INTERRUPT_MULTICHANNEL	0x09
-
-/**
- * struct fw_cdev_event_common - Common part of all fw_cdev_event_ types
- * @closure:	For arbitrary use by userspace
- * @type:	Discriminates the fw_cdev_event_ types
- *
- * This struct may be used to access generic members of all fw_cdev_event_
- * types regardless of the specific type.
- *
- * Data passed in the @closure field for a request will be returned in the
- * corresponding event.  It is big enough to hold a pointer on all platforms.
- * The ioctl used to set @closure depends on the @type of event.
- */
-struct fw_cdev_event_common {
-	__u64 closure;
-	__u32 type;
-};
-
-/**
- * struct fw_cdev_event_bus_reset - Sent when a bus reset occurred
- * @closure:	See &fw_cdev_event_common; set by %FW_CDEV_IOC_GET_INFO ioctl
- * @type:	See &fw_cdev_event_common; always %FW_CDEV_EVENT_BUS_RESET
- * @node_id:       New node ID of this node
- * @local_node_id: Node ID of the local node, i.e. of the controller
- * @bm_node_id:    Node ID of the bus manager
- * @irm_node_id:   Node ID of the iso resource manager
- * @root_node_id:  Node ID of the root node
- * @generation:    New bus generation
- *
- * This event is sent when the bus the device belongs to goes through a bus
- * reset.  It provides information about the new bus configuration, such as
- * new node ID for this device, new root ID, and others.
- *
- * If @bm_node_id is 0xffff right after bus reset it can be reread by an
- * %FW_CDEV_IOC_GET_INFO ioctl after bus manager selection was finished.
- * Kernels with ABI version < 4 do not set @bm_node_id.
- */
-struct fw_cdev_event_bus_reset {
-	__u64 closure;
-	__u32 type;
-	__u32 node_id;
-	__u32 local_node_id;
-	__u32 bm_node_id;
-	__u32 irm_node_id;
-	__u32 root_node_id;
-	__u32 generation;
-};
-
-/**
- * struct fw_cdev_event_response - Sent when a response packet was received
- * @closure:	See &fw_cdev_event_common; set by %FW_CDEV_IOC_SEND_REQUEST
- *		or %FW_CDEV_IOC_SEND_BROADCAST_REQUEST
- *		or %FW_CDEV_IOC_SEND_STREAM_PACKET ioctl
- * @type:	See &fw_cdev_event_common; always %FW_CDEV_EVENT_RESPONSE
- * @rcode:	Response code returned by the remote node
- * @length:	Data length, i.e. the response's payload size in bytes
- * @data:	Payload data, if any
- *
- * This event is sent when the stack receives a response to an outgoing request
- * sent by %FW_CDEV_IOC_SEND_REQUEST ioctl.  The payload data for responses
- * carrying data (read and lock responses) follows immediately and can be
- * accessed through the @data field.
- *
- * The event is also generated after conclusions of transactions that do not
- * involve response packets.  This includes unified write transactions,
- * broadcast write transactions, and transmission of asynchronous stream
- * packets.  @rcode indicates success or failure of such transmissions.
- */
-struct fw_cdev_event_response {
-	__u64 closure;
-	__u32 type;
-	__u32 rcode;
-	__u32 length;
-	__u32 data[0];
-};
-
-/**
- * struct fw_cdev_event_request - Old version of &fw_cdev_event_request2
- * @type:	See &fw_cdev_event_common; always %FW_CDEV_EVENT_REQUEST
- *
- * This event is sent instead of &fw_cdev_event_request2 if the kernel or
- * the client implements ABI version <= 3.  &fw_cdev_event_request lacks
- * essential information; use &fw_cdev_event_request2 instead.
- */
-struct fw_cdev_event_request {
-	__u64 closure;
-	__u32 type;
-	__u32 tcode;
-	__u64 offset;
-	__u32 handle;
-	__u32 length;
-	__u32 data[0];
-};
-
-/**
- * struct fw_cdev_event_request2 - Sent on incoming request to an address region
- * @closure:	See &fw_cdev_event_common; set by %FW_CDEV_IOC_ALLOCATE ioctl
- * @type:	See &fw_cdev_event_common; always %FW_CDEV_EVENT_REQUEST2
- * @tcode:	Transaction code of the incoming request
- * @offset:	The offset into the 48-bit per-node address space
- * @source_node_id: Sender node ID
- * @destination_node_id: Destination node ID
- * @card:	The index of the card from which the request came
- * @generation:	Bus generation in which the request is valid
- * @handle:	Reference to the kernel-side pending request
- * @length:	Data length, i.e. the request's payload size in bytes
- * @data:	Incoming data, if any
- *
- * This event is sent when the stack receives an incoming request to an address
- * region registered using the %FW_CDEV_IOC_ALLOCATE ioctl.  The request is
- * guaranteed to be completely contained in the specified region.  Userspace is
- * responsible for sending the response by %FW_CDEV_IOC_SEND_RESPONSE ioctl,
- * using the same @handle.
- *
- * The payload data for requests carrying data (write and lock requests)
- * follows immediately and can be accessed through the @data field.
- *
- * Unlike &fw_cdev_event_request, @tcode of lock requests is one of the
- * firewire-core specific %TCODE_LOCK_MASK_SWAP...%TCODE_LOCK_VENDOR_DEPENDENT,
- * i.e. encodes the extended transaction code.
- *
- * @card may differ from &fw_cdev_get_info.card because requests are received
- * from all cards of the Linux host.  @source_node_id, @destination_node_id, and
- * @generation pertain to that card.  Destination node ID and bus generation may
- * therefore differ from the corresponding fields of the last
- * &fw_cdev_event_bus_reset.
- *
- * @destination_node_id may also differ from the current node ID because of a
- * non-local bus ID part or in case of a broadcast write request.  Note, a
- * client must call an %FW_CDEV_IOC_SEND_RESPONSE ioctl even in case of a
- * broadcast write request; the kernel will then release the kernel-side pending
- * request but will not actually send a response packet.
- *
- * In case of a write request to FCP_REQUEST or FCP_RESPONSE, the kernel already
- * sent a write response immediately after the request was received; in this
- * case the client must still call an %FW_CDEV_IOC_SEND_RESPONSE ioctl to
- * release the kernel-side pending request, though another response won't be
- * sent.
- *
- * If the client subsequently needs to initiate requests to the sender node of
- * an &fw_cdev_event_request2, it needs to use a device file with matching
- * card index, node ID, and generation for outbound requests.
- */
-struct fw_cdev_event_request2 {
-	__u64 closure;
-	__u32 type;
-	__u32 tcode;
-	__u64 offset;
-	__u32 source_node_id;
-	__u32 destination_node_id;
-	__u32 card;
-	__u32 generation;
-	__u32 handle;
-	__u32 length;
-	__u32 data[0];
-};
-
-/**
- * struct fw_cdev_event_iso_interrupt - Sent when an iso packet was completed
- * @closure:	See &fw_cdev_event_common;
- *		set by %FW_CDEV_CREATE_ISO_CONTEXT ioctl
- * @type:	See &fw_cdev_event_common; always %FW_CDEV_EVENT_ISO_INTERRUPT
- * @cycle:	Cycle counter of the last completed packet
- * @header_length: Total length of following headers, in bytes
- * @header:	Stripped headers, if any
- *
- * This event is sent when the controller has completed an &fw_cdev_iso_packet
- * with the %FW_CDEV_ISO_INTERRUPT bit set, when explicitly requested with
- * %FW_CDEV_IOC_FLUSH_ISO, or when there have been so many completed packets
- * without the interrupt bit set that the kernel's internal buffer for @header
- * is about to overflow.  (In the last case, kernels with ABI version < 5 drop
- * header data up to the next interrupt packet.)
- *
- * Isochronous transmit events (context type %FW_CDEV_ISO_CONTEXT_TRANSMIT):
- *
- * In version 3 and some implementations of version 2 of the ABI, &header_length
- * is a multiple of 4 and &header contains timestamps of all packets up until
- * the interrupt packet.  The format of the timestamps is as described below for
- * isochronous reception.  In version 1 of the ABI, &header_length was 0.
- *
- * Isochronous receive events (context type %FW_CDEV_ISO_CONTEXT_RECEIVE):
- *
- * The headers stripped of all packets up until and including the interrupt
- * packet are returned in the @header field.  The amount of header data per
- * packet is as specified at iso context creation by
- * &fw_cdev_create_iso_context.header_size.
- *
- * Hence, _interrupt.header_length / _context.header_size is the number of
- * packets received in this interrupt event.  The client can now iterate
- * through the mmap()'ed DMA buffer according to this number of packets and
- * to the buffer sizes as the client specified in &fw_cdev_queue_iso.
- *
- * Since version 2 of this ABI, the portion for each packet in _interrupt.header
- * consists of the 1394 isochronous packet header, followed by a timestamp
- * quadlet if &fw_cdev_create_iso_context.header_size > 4, followed by quadlets
- * from the packet payload if &fw_cdev_create_iso_context.header_size > 8.
- *
- * Format of 1394 iso packet header:  16 bits data_length, 2 bits tag, 6 bits
- * channel, 4 bits tcode, 4 bits sy, in big endian byte order.
- * data_length is the actual received size of the packet without the four
- * 1394 iso packet header bytes.
- *
- * Format of timestamp:  16 bits invalid, 3 bits cycleSeconds, 13 bits
- * cycleCount, in big endian byte order.
- *
- * In version 1 of the ABI, no timestamp quadlet was inserted; instead, payload
- * data followed directly after the 1394 is header if header_size > 4.
- * Behaviour of ver. 1 of this ABI is no longer available since ABI ver. 2.
- */
-struct fw_cdev_event_iso_interrupt {
-	__u64 closure;
-	__u32 type;
-	__u32 cycle;
-	__u32 header_length;
-	__u32 header[0];
-};
-
-/**
- * struct fw_cdev_event_iso_interrupt_mc - An iso buffer chunk was completed
- * @closure:	See &fw_cdev_event_common;
- *		set by %FW_CDEV_CREATE_ISO_CONTEXT ioctl
- * @type:	%FW_CDEV_EVENT_ISO_INTERRUPT_MULTICHANNEL
- * @completed:	Offset into the receive buffer; data before this offset is valid
- *
- * This event is sent in multichannel contexts (context type
- * %FW_CDEV_ISO_CONTEXT_RECEIVE_MULTICHANNEL) for &fw_cdev_iso_packet buffer
- * chunks that have been completely filled and that have the
- * %FW_CDEV_ISO_INTERRUPT bit set, or when explicitly requested with
- * %FW_CDEV_IOC_FLUSH_ISO.
- *
- * The buffer is continuously filled with the following data, per packet:
- *  - the 1394 iso packet header as described at &fw_cdev_event_iso_interrupt,
- *    but in little endian byte order,
- *  - packet payload (as many bytes as specified in the data_length field of
- *    the 1394 iso packet header) in big endian byte order,
- *  - 0...3 padding bytes as needed to align the following trailer quadlet,
- *  - trailer quadlet, containing the reception timestamp as described at
- *    &fw_cdev_event_iso_interrupt, but in little endian byte order.
- *
- * Hence the per-packet size is data_length (rounded up to a multiple of 4) + 8.
- * When processing the data, stop before a packet that would cross the
- * @completed offset.
- *
- * A packet near the end of a buffer chunk will typically spill over into the
- * next queued buffer chunk.  It is the responsibility of the client to check
- * for this condition, assemble a broken-up packet from its parts, and not to
- * re-queue any buffer chunks in which as yet unread packet parts reside.
- */
-struct fw_cdev_event_iso_interrupt_mc {
-	__u64 closure;
-	__u32 type;
-	__u32 completed;
-};
-
-/**
- * struct fw_cdev_event_iso_resource - Iso resources were allocated or freed
- * @closure:	See &fw_cdev_event_common;
- *		set by %FW_CDEV_IOC_(DE)ALLOCATE_ISO_RESOURCE(_ONCE) ioctl
- * @type:	%FW_CDEV_EVENT_ISO_RESOURCE_ALLOCATED or
- *		%FW_CDEV_EVENT_ISO_RESOURCE_DEALLOCATED
- * @handle:	Reference by which an allocated resource can be deallocated
- * @channel:	Isochronous channel which was (de)allocated, if any
- * @bandwidth:	Bandwidth allocation units which were (de)allocated, if any
- *
- * An %FW_CDEV_EVENT_ISO_RESOURCE_ALLOCATED event is sent after an isochronous
- * resource was allocated at the IRM.  The client has to check @channel and
- * @bandwidth for whether the allocation actually succeeded.
- *
- * An %FW_CDEV_EVENT_ISO_RESOURCE_DEALLOCATED event is sent after an isochronous
- * resource was deallocated at the IRM.  It is also sent when automatic
- * reallocation after a bus reset failed.
- *
- * @channel is <0 if no channel was (de)allocated or if reallocation failed.
- * @bandwidth is 0 if no bandwidth was (de)allocated or if reallocation failed.
- */
-struct fw_cdev_event_iso_resource {
-	__u64 closure;
-	__u32 type;
-	__u32 handle;
-	__s32 channel;
-	__s32 bandwidth;
-};
-
-/**
- * struct fw_cdev_event_phy_packet - A PHY packet was transmitted or received
- * @closure:	See &fw_cdev_event_common; set by %FW_CDEV_IOC_SEND_PHY_PACKET
- *		or %FW_CDEV_IOC_RECEIVE_PHY_PACKETS ioctl
- * @type:	%FW_CDEV_EVENT_PHY_PACKET_SENT or %..._RECEIVED
- * @rcode:	%RCODE_..., indicates success or failure of transmission
- * @length:	Data length in bytes
- * @data:	Incoming data
- *
- * If @type is %FW_CDEV_EVENT_PHY_PACKET_SENT, @length is 0 and @data empty,
- * except in case of a ping packet:  Then, @length is 4, and @data[0] is the
- * ping time in 49.152MHz clocks if @rcode is %RCODE_COMPLETE.
- *
- * If @type is %FW_CDEV_EVENT_PHY_PACKET_RECEIVED, @length is 8 and @data
- * consists of the two PHY packet quadlets, in host byte order.
- */
-struct fw_cdev_event_phy_packet {
-	__u64 closure;
-	__u32 type;
-	__u32 rcode;
-	__u32 length;
-	__u32 data[0];
-};
-
-/**
- * union fw_cdev_event - Convenience union of fw_cdev_event_ types
- * @common:		Valid for all types
- * @bus_reset:		Valid if @common.type == %FW_CDEV_EVENT_BUS_RESET
- * @response:		Valid if @common.type == %FW_CDEV_EVENT_RESPONSE
- * @request:		Valid if @common.type == %FW_CDEV_EVENT_REQUEST
- * @request2:		Valid if @common.type == %FW_CDEV_EVENT_REQUEST2
- * @iso_interrupt:	Valid if @common.type == %FW_CDEV_EVENT_ISO_INTERRUPT
- * @iso_interrupt_mc:	Valid if @common.type ==
- *				%FW_CDEV_EVENT_ISO_INTERRUPT_MULTICHANNEL
- * @iso_resource:	Valid if @common.type ==
- *				%FW_CDEV_EVENT_ISO_RESOURCE_ALLOCATED or
- *				%FW_CDEV_EVENT_ISO_RESOURCE_DEALLOCATED
- * @phy_packet:		Valid if @common.type ==
- *				%FW_CDEV_EVENT_PHY_PACKET_SENT or
- *				%FW_CDEV_EVENT_PHY_PACKET_RECEIVED
- *
- * Convenience union for userspace use.  Events could be read(2) into an
- * appropriately aligned char buffer and then cast to this union for further
- * processing.  Note that for a request, response or iso_interrupt event,
- * the data[] or header[] may make the size of the full event larger than
- * sizeof(union fw_cdev_event).  Also note that if you attempt to read(2)
- * an event into a buffer that is not large enough for it, the data that does
- * not fit will be discarded so that the next read(2) will return a new event.
- */
-union fw_cdev_event {
-	struct fw_cdev_event_common		common;
-	struct fw_cdev_event_bus_reset		bus_reset;
-	struct fw_cdev_event_response		response;
-	struct fw_cdev_event_request		request;
-	struct fw_cdev_event_request2		request2;		/* added in 2.6.36 */
-	struct fw_cdev_event_iso_interrupt	iso_interrupt;
-	struct fw_cdev_event_iso_interrupt_mc	iso_interrupt_mc;	/* added in 2.6.36 */
-	struct fw_cdev_event_iso_resource	iso_resource;		/* added in 2.6.30 */
-	struct fw_cdev_event_phy_packet		phy_packet;		/* added in 2.6.36 */
-};
-
-/* available since kernel version 2.6.22 */
-#define FW_CDEV_IOC_GET_INFO           _IOWR('#', 0x00, struct fw_cdev_get_info)
-#define FW_CDEV_IOC_SEND_REQUEST        _IOW('#', 0x01, struct fw_cdev_send_request)
-#define FW_CDEV_IOC_ALLOCATE           _IOWR('#', 0x02, struct fw_cdev_allocate)
-#define FW_CDEV_IOC_DEALLOCATE          _IOW('#', 0x03, struct fw_cdev_deallocate)
-#define FW_CDEV_IOC_SEND_RESPONSE       _IOW('#', 0x04, struct fw_cdev_send_response)
-#define FW_CDEV_IOC_INITIATE_BUS_RESET  _IOW('#', 0x05, struct fw_cdev_initiate_bus_reset)
-#define FW_CDEV_IOC_ADD_DESCRIPTOR     _IOWR('#', 0x06, struct fw_cdev_add_descriptor)
-#define FW_CDEV_IOC_REMOVE_DESCRIPTOR   _IOW('#', 0x07, struct fw_cdev_remove_descriptor)
-#define FW_CDEV_IOC_CREATE_ISO_CONTEXT _IOWR('#', 0x08, struct fw_cdev_create_iso_context)
-#define FW_CDEV_IOC_QUEUE_ISO          _IOWR('#', 0x09, struct fw_cdev_queue_iso)
-#define FW_CDEV_IOC_START_ISO           _IOW('#', 0x0a, struct fw_cdev_start_iso)
-#define FW_CDEV_IOC_STOP_ISO            _IOW('#', 0x0b, struct fw_cdev_stop_iso)
-
-/* available since kernel version 2.6.24 */
-#define FW_CDEV_IOC_GET_CYCLE_TIMER     _IOR('#', 0x0c, struct fw_cdev_get_cycle_timer)
-
-/* available since kernel version 2.6.30 */
-#define FW_CDEV_IOC_ALLOCATE_ISO_RESOURCE       _IOWR('#', 0x0d, struct fw_cdev_allocate_iso_resource)
-#define FW_CDEV_IOC_DEALLOCATE_ISO_RESOURCE      _IOW('#', 0x0e, struct fw_cdev_deallocate)
-#define FW_CDEV_IOC_ALLOCATE_ISO_RESOURCE_ONCE   _IOW('#', 0x0f, struct fw_cdev_allocate_iso_resource)
-#define FW_CDEV_IOC_DEALLOCATE_ISO_RESOURCE_ONCE _IOW('#', 0x10, struct fw_cdev_allocate_iso_resource)
-#define FW_CDEV_IOC_GET_SPEED                     _IO('#', 0x11) /* returns speed code */
-#define FW_CDEV_IOC_SEND_BROADCAST_REQUEST       _IOW('#', 0x12, struct fw_cdev_send_request)
-#define FW_CDEV_IOC_SEND_STREAM_PACKET           _IOW('#', 0x13, struct fw_cdev_send_stream_packet)
-
-/* available since kernel version 2.6.34 */
-#define FW_CDEV_IOC_GET_CYCLE_TIMER2   _IOWR('#', 0x14, struct fw_cdev_get_cycle_timer2)
-
-/* available since kernel version 2.6.36 */
-#define FW_CDEV_IOC_SEND_PHY_PACKET    _IOWR('#', 0x15, struct fw_cdev_send_phy_packet)
-#define FW_CDEV_IOC_RECEIVE_PHY_PACKETS _IOW('#', 0x16, struct fw_cdev_receive_phy_packets)
-#define FW_CDEV_IOC_SET_ISO_CHANNELS    _IOW('#', 0x17, struct fw_cdev_set_iso_channels)
-
-/* available since kernel version 3.4 */
-#define FW_CDEV_IOC_FLUSH_ISO           _IOW('#', 0x18, struct fw_cdev_flush_iso)
-
-/*
- * ABI version history
- *  1  (2.6.22)  - initial version
- *     (2.6.24)  - added %FW_CDEV_IOC_GET_CYCLE_TIMER
- *  2  (2.6.30)  - changed &fw_cdev_event_iso_interrupt.header if
- *                 &fw_cdev_create_iso_context.header_size is 8 or more
- *               - added %FW_CDEV_IOC_*_ISO_RESOURCE*,
- *                 %FW_CDEV_IOC_GET_SPEED, %FW_CDEV_IOC_SEND_BROADCAST_REQUEST,
- *                 %FW_CDEV_IOC_SEND_STREAM_PACKET
- *     (2.6.32)  - added time stamp to xmit &fw_cdev_event_iso_interrupt
- *     (2.6.33)  - IR has always packet-per-buffer semantics now, not one of
- *                 dual-buffer or packet-per-buffer depending on hardware
- *               - shared use and auto-response for FCP registers
- *  3  (2.6.34)  - made &fw_cdev_get_cycle_timer reliable
- *               - added %FW_CDEV_IOC_GET_CYCLE_TIMER2
- *  4  (2.6.36)  - added %FW_CDEV_EVENT_REQUEST2, %FW_CDEV_EVENT_PHY_PACKET_*,
- *                 and &fw_cdev_allocate.region_end
- *               - implemented &fw_cdev_event_bus_reset.bm_node_id
- *               - added %FW_CDEV_IOC_SEND_PHY_PACKET, _RECEIVE_PHY_PACKETS
- *               - added %FW_CDEV_EVENT_ISO_INTERRUPT_MULTICHANNEL,
- *                 %FW_CDEV_ISO_CONTEXT_RECEIVE_MULTICHANNEL, and
- *                 %FW_CDEV_IOC_SET_ISO_CHANNELS
- *  5  (3.4)     - send %FW_CDEV_EVENT_ISO_INTERRUPT events when needed to
- *                 avoid dropping data
- *               - added %FW_CDEV_IOC_FLUSH_ISO
- */
-
-/**
- * struct fw_cdev_get_info - General purpose information ioctl
- * @version:	The version field is just a running serial number.  Both an
- *		input parameter (ABI version implemented by the client) and
- *		output parameter (ABI version implemented by the kernel).
- *		A client shall fill in the ABI @version for which the client
- *		was implemented.  This is necessary for forward compatibility.
- * @rom_length:	If @rom is non-zero, up to @rom_length bytes of Configuration
- *		ROM will be copied into that user space address.  In either
- *		case, @rom_length is updated with the actual length of the
- *		Configuration ROM.
- * @rom:	If non-zero, address of a buffer to be filled by a copy of the
- *		device's Configuration ROM
- * @bus_reset:	If non-zero, address of a buffer to be filled by a
- *		&struct fw_cdev_event_bus_reset with the current state
- *		of the bus.  This does not cause a bus reset to happen.
- * @bus_reset_closure: Value of &closure in this and subsequent bus reset events
- * @card:	The index of the card this device belongs to
- *
- * The %FW_CDEV_IOC_GET_INFO ioctl is usually the very first one which a client
- * performs right after it opened a /dev/fw* file.
- *
- * As a side effect, reception of %FW_CDEV_EVENT_BUS_RESET events to be read(2)
- * is started by this ioctl.
- */
-struct fw_cdev_get_info {
-	__u32 version;
-	__u32 rom_length;
-	__u64 rom;
-	__u64 bus_reset;
-	__u64 bus_reset_closure;
-	__u32 card;
-};
-
-/**
- * struct fw_cdev_send_request - Send an asynchronous request packet
- * @tcode:	Transaction code of the request
- * @length:	Length of outgoing payload, in bytes
- * @offset:	48-bit offset at destination node
- * @closure:	Passed back to userspace in the response event
- * @data:	Userspace pointer to payload
- * @generation:	The bus generation where packet is valid
- *
- * Send a request to the device.  This ioctl implements all outgoing requests.
- * Both quadlet and block request specify the payload as a pointer to the data
- * in the @data field.  Once the transaction completes, the kernel writes an
- * &fw_cdev_event_response event back.  The @closure field is passed back to
- * user space in the response event.
- */
-struct fw_cdev_send_request {
-	__u32 tcode;
-	__u32 length;
-	__u64 offset;
-	__u64 closure;
-	__u64 data;
-	__u32 generation;
-};
-
-/**
- * struct fw_cdev_send_response - Send an asynchronous response packet
- * @rcode:	Response code as determined by the userspace handler
- * @length:	Length of outgoing payload, in bytes
- * @data:	Userspace pointer to payload
- * @handle:	The handle from the &fw_cdev_event_request
- *
- * Send a response to an incoming request.  By setting up an address range using
- * the %FW_CDEV_IOC_ALLOCATE ioctl, userspace can listen for incoming requests.  An
- * incoming request will generate an %FW_CDEV_EVENT_REQUEST, and userspace must
- * send a reply using this ioctl.  The event has a handle to the kernel-side
- * pending transaction, which should be used with this ioctl.
- */
-struct fw_cdev_send_response {
-	__u32 rcode;
-	__u32 length;
-	__u64 data;
-	__u32 handle;
-};
-
-/**
- * struct fw_cdev_allocate - Allocate a CSR in an address range
- * @offset:	Start offset of the address range
- * @closure:	To be passed back to userspace in request events
- * @length:	Length of the CSR, in bytes
- * @handle:	Handle to the allocation, written by the kernel
- * @region_end:	First address above the address range (added in ABI v4, 2.6.36)
- *
- * Allocate an address range in the 48-bit address space on the local node
- * (the controller).  This allows userspace to listen for requests with an
- * offset within that address range.  Every time when the kernel receives a
- * request within the range, an &fw_cdev_event_request2 event will be emitted.
- * (If the kernel or the client implements ABI version <= 3, an
- * &fw_cdev_event_request will be generated instead.)
- *
- * The @closure field is passed back to userspace in these request events.
- * The @handle field is an out parameter, returning a handle to the allocated
- * range to be used for later deallocation of the range.
- *
- * The address range is allocated on all local nodes.  The address allocation
- * is exclusive except for the FCP command and response registers.  If an
- * exclusive address region is already in use, the ioctl fails with errno set
- * to %EBUSY.
- *
- * If kernel and client implement ABI version >= 4, the kernel looks up a free
- * spot of size @length inside [@offset..@region_end) and, if found, writes
- * the start address of the new CSR back in @offset.  I.e. @offset is an
- * in and out parameter.  If this automatic placement of a CSR in a bigger
- * address range is not desired, the client simply needs to set @region_end
- * = @offset + @length.
- *
- * If the kernel or the client implements ABI version <= 3, @region_end is
- * ignored and effectively assumed to be @offset + @length.
- *
- * @region_end is only present in a kernel header >= 2.6.36.  If necessary,
- * this can for example be tested by #ifdef FW_CDEV_EVENT_REQUEST2.
- */
-struct fw_cdev_allocate {
-	__u64 offset;
-	__u64 closure;
-	__u32 length;
-	__u32 handle;
-	__u64 region_end;	/* available since kernel version 2.6.36 */
-};
-
-/**
- * struct fw_cdev_deallocate - Free a CSR address range or isochronous resource
- * @handle:	Handle to the address range or iso resource, as returned by the
- *		kernel when the range or resource was allocated
- */
-struct fw_cdev_deallocate {
-	__u32 handle;
-};
-
-#define FW_CDEV_LONG_RESET	0
-#define FW_CDEV_SHORT_RESET	1
-
-/**
- * struct fw_cdev_initiate_bus_reset - Initiate a bus reset
- * @type:	%FW_CDEV_SHORT_RESET or %FW_CDEV_LONG_RESET
- *
- * Initiate a bus reset for the bus this device is on.  The bus reset can be
- * either the original (long) bus reset or the arbitrated (short) bus reset
- * introduced in 1394a-2000.
- *
- * The ioctl returns immediately.  A subsequent &fw_cdev_event_bus_reset
- * indicates when the reset actually happened.  Since ABI v4, this may be
- * considerably later than the ioctl because the kernel ensures a grace period
- * between subsequent bus resets as per IEEE 1394 bus management specification.
- */
-struct fw_cdev_initiate_bus_reset {
-	__u32 type;
-};
-
-/**
- * struct fw_cdev_add_descriptor - Add contents to the local node's config ROM
- * @immediate:	If non-zero, immediate key to insert before pointer
- * @key:	Upper 8 bits of root directory pointer
- * @data:	Userspace pointer to contents of descriptor block
- * @length:	Length of descriptor block data, in quadlets
- * @handle:	Handle to the descriptor, written by the kernel
- *
- * Add a descriptor block and optionally a preceding immediate key to the local
- * node's Configuration ROM.
- *
- * The @key field specifies the upper 8 bits of the descriptor root directory
- * pointer and the @data and @length fields specify the contents. The @key
- * should be of the form 0xXX000000. The offset part of the root directory entry
- * will be filled in by the kernel.
- *
- * If not 0, the @immediate field specifies an immediate key which will be
- * inserted before the root directory pointer.
- *
- * @immediate, @key, and @data array elements are CPU-endian quadlets.
- *
- * If successful, the kernel adds the descriptor and writes back a @handle to
- * the kernel-side object to be used for later removal of the descriptor block
- * and immediate key.  The kernel will also generate a bus reset to signal the
- * change of the Configuration ROM to other nodes.
- *
- * This ioctl affects the Configuration ROMs of all local nodes.
- * The ioctl only succeeds on device files which represent a local node.
- */
-struct fw_cdev_add_descriptor {
-	__u32 immediate;
-	__u32 key;
-	__u64 data;
-	__u32 length;
-	__u32 handle;
-};
-
-/**
- * struct fw_cdev_remove_descriptor - Remove contents from the Configuration ROM
- * @handle:	Handle to the descriptor, as returned by the kernel when the
- *		descriptor was added
- *
- * Remove a descriptor block and accompanying immediate key from the local
- * nodes' Configuration ROMs.  The kernel will also generate a bus reset to
- * signal the change of the Configuration ROM to other nodes.
- */
-struct fw_cdev_remove_descriptor {
-	__u32 handle;
-};
-
-#define FW_CDEV_ISO_CONTEXT_TRANSMIT			0
-#define FW_CDEV_ISO_CONTEXT_RECEIVE			1
-#define FW_CDEV_ISO_CONTEXT_RECEIVE_MULTICHANNEL	2 /* added in 2.6.36 */
-
-/**
- * struct fw_cdev_create_iso_context - Create a context for isochronous I/O
- * @type:	%FW_CDEV_ISO_CONTEXT_TRANSMIT or %FW_CDEV_ISO_CONTEXT_RECEIVE or
- *		%FW_CDEV_ISO_CONTEXT_RECEIVE_MULTICHANNEL
- * @header_size: Header size to strip in single-channel reception
- * @channel:	Channel to bind to in single-channel reception or transmission
- * @speed:	Transmission speed
- * @closure:	To be returned in &fw_cdev_event_iso_interrupt or
- *		&fw_cdev_event_iso_interrupt_multichannel
- * @handle:	Handle to context, written back by kernel
- *
- * Prior to sending or receiving isochronous I/O, a context must be created.
- * The context records information about the transmit or receive configuration
- * and typically maps to an underlying hardware resource.  A context is set up
- * for either sending or receiving.  It is bound to a specific isochronous
- * @channel.
- *
- * In case of multichannel reception, @header_size and @channel are ignored
- * and the channels are selected by %FW_CDEV_IOC_SET_ISO_CHANNELS.
- *
- * For %FW_CDEV_ISO_CONTEXT_RECEIVE contexts, @header_size must be at least 4
- * and must be a multiple of 4.  It is ignored in other context types.
- *
- * @speed is ignored in receive context types.
- *
- * If a context was successfully created, the kernel writes back a handle to the
- * context, which must be passed in for subsequent operations on that context.
- *
- * Limitations:
- * No more than one iso context can be created per fd.
- * The total number of contexts that all userspace and kernelspace drivers can
- * create on a card at a time is a hardware limit, typically 4 or 8 contexts per
- * direction, and of them at most one multichannel receive context.
- */
-struct fw_cdev_create_iso_context {
-	__u32 type;
-	__u32 header_size;
-	__u32 channel;
-	__u32 speed;
-	__u64 closure;
-	__u32 handle;
-};
-
-/**
- * struct fw_cdev_set_iso_channels - Select channels in multichannel reception
- * @channels:	Bitmask of channels to listen to
- * @handle:	Handle of the mutichannel receive context
- *
- * @channels is the bitwise or of 1ULL << n for each channel n to listen to.
- *
- * The ioctl fails with errno %EBUSY if there is already another receive context
- * on a channel in @channels.  In that case, the bitmask of all unoccupied
- * channels is returned in @channels.
- */
-struct fw_cdev_set_iso_channels {
-	__u64 channels;
-	__u32 handle;
-};
-
-#define FW_CDEV_ISO_PAYLOAD_LENGTH(v)	(v)
-#define FW_CDEV_ISO_INTERRUPT		(1 << 16)
-#define FW_CDEV_ISO_SKIP		(1 << 17)
-#define FW_CDEV_ISO_SYNC		(1 << 17)
-#define FW_CDEV_ISO_TAG(v)		((v) << 18)
-#define FW_CDEV_ISO_SY(v)		((v) << 20)
-#define FW_CDEV_ISO_HEADER_LENGTH(v)	((v) << 24)
-
-/**
- * struct fw_cdev_iso_packet - Isochronous packet
- * @control:	Contains the header length (8 uppermost bits),
- *		the sy field (4 bits), the tag field (2 bits), a sync flag
- *		or a skip flag (1 bit), an interrupt flag (1 bit), and the
- *		payload length (16 lowermost bits)
- * @header:	Header and payload in case of a transmit context.
- *
- * &struct fw_cdev_iso_packet is used to describe isochronous packet queues.
- * Use the FW_CDEV_ISO_ macros to fill in @control.
- * The @header array is empty in case of receive contexts.
- *
- * Context type %FW_CDEV_ISO_CONTEXT_TRANSMIT:
- *
- * @control.HEADER_LENGTH must be a multiple of 4.  It specifies the numbers of
- * bytes in @header that will be prepended to the packet's payload.  These bytes
- * are copied into the kernel and will not be accessed after the ioctl has
- * returned.
- *
- * The @control.SY and TAG fields are copied to the iso packet header.  These
- * fields are specified by IEEE 1394a and IEC 61883-1.
- *
- * The @control.SKIP flag specifies that no packet is to be sent in a frame.
- * When using this, all other fields except @control.INTERRUPT must be zero.
- *
- * When a packet with the @control.INTERRUPT flag set has been completed, an
- * &fw_cdev_event_iso_interrupt event will be sent.
- *
- * Context type %FW_CDEV_ISO_CONTEXT_RECEIVE:
- *
- * @control.HEADER_LENGTH must be a multiple of the context's header_size.
- * If the HEADER_LENGTH is larger than the context's header_size, multiple
- * packets are queued for this entry.
- *
- * The @control.SY and TAG fields are ignored.
- *
- * If the @control.SYNC flag is set, the context drops all packets until a
- * packet with a sy field is received which matches &fw_cdev_start_iso.sync.
- *
- * @control.PAYLOAD_LENGTH defines how many payload bytes can be received for
- * one packet (in addition to payload quadlets that have been defined as headers
- * and are stripped and returned in the &fw_cdev_event_iso_interrupt structure).
- * If more bytes are received, the additional bytes are dropped.  If less bytes
- * are received, the remaining bytes in this part of the payload buffer will not
- * be written to, not even by the next packet.  I.e., packets received in
- * consecutive frames will not necessarily be consecutive in memory.  If an
- * entry has queued multiple packets, the PAYLOAD_LENGTH is divided equally
- * among them.
- *
- * When a packet with the @control.INTERRUPT flag set has been completed, an
- * &fw_cdev_event_iso_interrupt event will be sent.  An entry that has queued
- * multiple receive packets is completed when its last packet is completed.
- *
- * Context type %FW_CDEV_ISO_CONTEXT_RECEIVE_MULTICHANNEL:
- *
- * Here, &fw_cdev_iso_packet would be more aptly named _iso_buffer_chunk since
- * it specifies a chunk of the mmap()'ed buffer, while the number and alignment
- * of packets to be placed into the buffer chunk is not known beforehand.
- *
- * @control.PAYLOAD_LENGTH is the size of the buffer chunk and specifies room
- * for header, payload, padding, and trailer bytes of one or more packets.
- * It must be a multiple of 4.
- *
- * @control.HEADER_LENGTH, TAG and SY are ignored.  SYNC is treated as described
- * for single-channel reception.
- *
- * When a buffer chunk with the @control.INTERRUPT flag set has been filled
- * entirely, an &fw_cdev_event_iso_interrupt_mc event will be sent.
- */
-struct fw_cdev_iso_packet {
-	__u32 control;
-	__u32 header[0];
-};
-
-/**
- * struct fw_cdev_queue_iso - Queue isochronous packets for I/O
- * @packets:	Userspace pointer to an array of &fw_cdev_iso_packet
- * @data:	Pointer into mmap()'ed payload buffer
- * @size:	Size of the @packets array, in bytes
- * @handle:	Isochronous context handle
- *
- * Queue a number of isochronous packets for reception or transmission.
- * This ioctl takes a pointer to an array of &fw_cdev_iso_packet structs,
- * which describe how to transmit from or receive into a contiguous region
- * of a mmap()'ed payload buffer.  As part of transmit packet descriptors,
- * a series of headers can be supplied, which will be prepended to the
- * payload during DMA.
- *
- * The kernel may or may not queue all packets, but will write back updated
- * values of the @packets, @data and @size fields, so the ioctl can be
- * resubmitted easily.
- *
- * In case of a multichannel receive context, @data must be quadlet-aligned
- * relative to the buffer start.
- */
-struct fw_cdev_queue_iso {
-	__u64 packets;
-	__u64 data;
-	__u32 size;
-	__u32 handle;
-};
-
-#define FW_CDEV_ISO_CONTEXT_MATCH_TAG0		 1
-#define FW_CDEV_ISO_CONTEXT_MATCH_TAG1		 2
-#define FW_CDEV_ISO_CONTEXT_MATCH_TAG2		 4
-#define FW_CDEV_ISO_CONTEXT_MATCH_TAG3		 8
-#define FW_CDEV_ISO_CONTEXT_MATCH_ALL_TAGS	15
-
-/**
- * struct fw_cdev_start_iso - Start an isochronous transmission or reception
- * @cycle:	Cycle in which to start I/O.  If @cycle is greater than or
- *		equal to 0, the I/O will start on that cycle.
- * @sync:	Determines the value to wait for for receive packets that have
- *		the %FW_CDEV_ISO_SYNC bit set
- * @tags:	Tag filter bit mask.  Only valid for isochronous reception.
- *		Determines the tag values for which packets will be accepted.
- *		Use FW_CDEV_ISO_CONTEXT_MATCH_ macros to set @tags.
- * @handle:	Isochronous context handle within which to transmit or receive
- */
-struct fw_cdev_start_iso {
-	__s32 cycle;
-	__u32 sync;
-	__u32 tags;
-	__u32 handle;
-};
-
-/**
- * struct fw_cdev_stop_iso - Stop an isochronous transmission or reception
- * @handle:	Handle of isochronous context to stop
- */
-struct fw_cdev_stop_iso {
-	__u32 handle;
-};
-
-/**
- * struct fw_cdev_flush_iso - flush completed iso packets
- * @handle:	handle of isochronous context to flush
- *
- * For %FW_CDEV_ISO_CONTEXT_TRANSMIT or %FW_CDEV_ISO_CONTEXT_RECEIVE contexts,
- * report any completed packets.
- *
- * For %FW_CDEV_ISO_CONTEXT_RECEIVE_MULTICHANNEL contexts, report the current
- * offset in the receive buffer, if it has changed; this is typically in the
- * middle of some buffer chunk.
- *
- * Any %FW_CDEV_EVENT_ISO_INTERRUPT or %FW_CDEV_EVENT_ISO_INTERRUPT_MULTICHANNEL
- * events generated by this ioctl are sent synchronously, i.e., are available
- * for reading from the file descriptor when this ioctl returns.
- */
-struct fw_cdev_flush_iso {
-	__u32 handle;
-};
-
-/**
- * struct fw_cdev_get_cycle_timer - read cycle timer register
- * @local_time:   system time, in microseconds since the Epoch
- * @cycle_timer:  Cycle Time register contents
- *
- * Same as %FW_CDEV_IOC_GET_CYCLE_TIMER2, but fixed to use %CLOCK_REALTIME
- * and only with microseconds resolution.
- *
- * In version 1 and 2 of the ABI, this ioctl returned unreliable (non-
- * monotonic) @cycle_timer values on certain controllers.
- */
-struct fw_cdev_get_cycle_timer {
-	__u64 local_time;
-	__u32 cycle_timer;
-};
-
-/**
- * struct fw_cdev_get_cycle_timer2 - read cycle timer register
- * @tv_sec:       system time, seconds
- * @tv_nsec:      system time, sub-seconds part in nanoseconds
- * @clk_id:       input parameter, clock from which to get the system time
- * @cycle_timer:  Cycle Time register contents
- *
- * The %FW_CDEV_IOC_GET_CYCLE_TIMER2 ioctl reads the isochronous cycle timer
- * and also the system clock.  This allows to correlate reception time of
- * isochronous packets with system time.
- *
- * @clk_id lets you choose a clock like with POSIX' clock_gettime function.
- * Supported @clk_id values are POSIX' %CLOCK_REALTIME and %CLOCK_MONOTONIC
- * and Linux' %CLOCK_MONOTONIC_RAW.
- *
- * @cycle_timer consists of 7 bits cycleSeconds, 13 bits cycleCount, and
- * 12 bits cycleOffset, in host byte order.  Cf. the Cycle Time register
- * per IEEE 1394 or Isochronous Cycle Timer register per OHCI-1394.
- */
-struct fw_cdev_get_cycle_timer2 {
-	__s64 tv_sec;
-	__s32 tv_nsec;
-	__s32 clk_id;
-	__u32 cycle_timer;
-};
-
-/**
- * struct fw_cdev_allocate_iso_resource - (De)allocate a channel or bandwidth
- * @closure:	Passed back to userspace in corresponding iso resource events
- * @channels:	Isochronous channels of which one is to be (de)allocated
- * @bandwidth:	Isochronous bandwidth units to be (de)allocated
- * @handle:	Handle to the allocation, written by the kernel (only valid in
- *		case of %FW_CDEV_IOC_ALLOCATE_ISO_RESOURCE ioctls)
- *
- * The %FW_CDEV_IOC_ALLOCATE_ISO_RESOURCE ioctl initiates allocation of an
- * isochronous channel and/or of isochronous bandwidth at the isochronous
- * resource manager (IRM).  Only one of the channels specified in @channels is
- * allocated.  An %FW_CDEV_EVENT_ISO_RESOURCE_ALLOCATED is sent after
- * communication with the IRM, indicating success or failure in the event data.
- * The kernel will automatically reallocate the resources after bus resets.
- * Should a reallocation fail, an %FW_CDEV_EVENT_ISO_RESOURCE_DEALLOCATED event
- * will be sent.  The kernel will also automatically deallocate the resources
- * when the file descriptor is closed.
- *
- * The %FW_CDEV_IOC_DEALLOCATE_ISO_RESOURCE ioctl can be used to initiate
- * deallocation of resources which were allocated as described above.
- * An %FW_CDEV_EVENT_ISO_RESOURCE_DEALLOCATED event concludes this operation.
- *
- * The %FW_CDEV_IOC_ALLOCATE_ISO_RESOURCE_ONCE ioctl is a variant of allocation
- * without automatic re- or deallocation.
- * An %FW_CDEV_EVENT_ISO_RESOURCE_ALLOCATED event concludes this operation,
- * indicating success or failure in its data.
- *
- * The %FW_CDEV_IOC_DEALLOCATE_ISO_RESOURCE_ONCE ioctl works like
- * %FW_CDEV_IOC_ALLOCATE_ISO_RESOURCE_ONCE except that resources are freed
- * instead of allocated.
- * An %FW_CDEV_EVENT_ISO_RESOURCE_DEALLOCATED event concludes this operation.
- *
- * To summarize, %FW_CDEV_IOC_ALLOCATE_ISO_RESOURCE allocates iso resources
- * for the lifetime of the fd or @handle.
- * In contrast, %FW_CDEV_IOC_ALLOCATE_ISO_RESOURCE_ONCE allocates iso resources
- * for the duration of a bus generation.
- *
- * @channels is a host-endian bitfield with the least significant bit
- * representing channel 0 and the most significant bit representing channel 63:
- * 1ULL << c for each channel c that is a candidate for (de)allocation.
- *
- * @bandwidth is expressed in bandwidth allocation units, i.e. the time to send
- * one quadlet of data (payload or header data) at speed S1600.
- */
-struct fw_cdev_allocate_iso_resource {
-	__u64 closure;
-	__u64 channels;
-	__u32 bandwidth;
-	__u32 handle;
-};
-
-/**
- * struct fw_cdev_send_stream_packet - send an asynchronous stream packet
- * @length:	Length of outgoing payload, in bytes
- * @tag:	Data format tag
- * @channel:	Isochronous channel to transmit to
- * @sy:		Synchronization code
- * @closure:	Passed back to userspace in the response event
- * @data:	Userspace pointer to payload
- * @generation:	The bus generation where packet is valid
- * @speed:	Speed to transmit at
- *
- * The %FW_CDEV_IOC_SEND_STREAM_PACKET ioctl sends an asynchronous stream packet
- * to every device which is listening to the specified channel.  The kernel
- * writes an &fw_cdev_event_response event which indicates success or failure of
- * the transmission.
- */
-struct fw_cdev_send_stream_packet {
-	__u32 length;
-	__u32 tag;
-	__u32 channel;
-	__u32 sy;
-	__u64 closure;
-	__u64 data;
-	__u32 generation;
-	__u32 speed;
-};
-
-/**
- * struct fw_cdev_send_phy_packet - send a PHY packet
- * @closure:	Passed back to userspace in the PHY-packet-sent event
- * @data:	First and second quadlet of the PHY packet
- * @generation:	The bus generation where packet is valid
- *
- * The %FW_CDEV_IOC_SEND_PHY_PACKET ioctl sends a PHY packet to all nodes
- * on the same card as this device.  After transmission, an
- * %FW_CDEV_EVENT_PHY_PACKET_SENT event is generated.
- *
- * The payload @data[] shall be specified in host byte order.  Usually,
- * @data[1] needs to be the bitwise inverse of @data[0].  VersaPHY packets
- * are an exception to this rule.
- *
- * The ioctl is only permitted on device files which represent a local node.
- */
-struct fw_cdev_send_phy_packet {
-	__u64 closure;
-	__u32 data[2];
-	__u32 generation;
-};
-
-/**
- * struct fw_cdev_receive_phy_packets - start reception of PHY packets
- * @closure: Passed back to userspace in phy packet events
- *
- * This ioctl activates issuing of %FW_CDEV_EVENT_PHY_PACKET_RECEIVED due to
- * incoming PHY packets from any node on the same bus as the device.
- *
- * The ioctl is only permitted on device files which represent a local node.
- */
-struct fw_cdev_receive_phy_packets {
-	__u64 closure;
-};
-
-#define FW_CDEV_VERSION 3 /* Meaningless legacy macro; don't use it. */
-
-#endif /* _LINUX_FIREWIRE_CDEV_H */
diff --git a/ANDROID_3.4.5/include/linux/firewire-constants.h b/ANDROID_3.4.5/include/linux/firewire-constants.h
deleted file mode 100644
index 9b4bb5fb..00000000
--- a/ANDROID_3.4.5/include/linux/firewire-constants.h
+++ /dev/null
@@ -1,92 +0,0 @@
-/*
- * IEEE 1394 constants.
- *
- * Copyright (C) 2005-2007  Kristian Hoegsberg <krh@bitplanet.net>
- *
- * Permission is hereby granted, free of charge, to any person obtaining a
- * copy of this software and associated documentation files (the "Software"),
- * to deal in the Software without restriction, including without limitation
- * the rights to use, copy, modify, merge, publish, distribute, sublicense,
- * and/or sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice (including the next
- * paragraph) shall be included in all copies or substantial portions of the
- * Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
- * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR
- * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
- * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
- * DEALINGS IN THE SOFTWARE.
- */
-
-#ifndef _LINUX_FIREWIRE_CONSTANTS_H
-#define _LINUX_FIREWIRE_CONSTANTS_H
-
-#define TCODE_WRITE_QUADLET_REQUEST	0x0
-#define TCODE_WRITE_BLOCK_REQUEST	0x1
-#define TCODE_WRITE_RESPONSE		0x2
-#define TCODE_READ_QUADLET_REQUEST	0x4
-#define TCODE_READ_BLOCK_REQUEST	0x5
-#define TCODE_READ_QUADLET_RESPONSE	0x6
-#define TCODE_READ_BLOCK_RESPONSE	0x7
-#define TCODE_CYCLE_START		0x8
-#define TCODE_LOCK_REQUEST		0x9
-#define TCODE_STREAM_DATA		0xa
-#define TCODE_LOCK_RESPONSE		0xb
-
-#define EXTCODE_MASK_SWAP		0x1
-#define EXTCODE_COMPARE_SWAP		0x2
-#define EXTCODE_FETCH_ADD		0x3
-#define EXTCODE_LITTLE_ADD		0x4
-#define EXTCODE_BOUNDED_ADD		0x5
-#define EXTCODE_WRAP_ADD		0x6
-#define EXTCODE_VENDOR_DEPENDENT	0x7
-
-/* Linux firewire-core (Juju) specific tcodes */
-#define TCODE_LOCK_MASK_SWAP		(0x10 | EXTCODE_MASK_SWAP)
-#define TCODE_LOCK_COMPARE_SWAP		(0x10 | EXTCODE_COMPARE_SWAP)
-#define TCODE_LOCK_FETCH_ADD		(0x10 | EXTCODE_FETCH_ADD)
-#define TCODE_LOCK_LITTLE_ADD		(0x10 | EXTCODE_LITTLE_ADD)
-#define TCODE_LOCK_BOUNDED_ADD		(0x10 | EXTCODE_BOUNDED_ADD)
-#define TCODE_LOCK_WRAP_ADD		(0x10 | EXTCODE_WRAP_ADD)
-#define TCODE_LOCK_VENDOR_DEPENDENT	(0x10 | EXTCODE_VENDOR_DEPENDENT)
-
-#define RCODE_COMPLETE			0x0
-#define RCODE_CONFLICT_ERROR		0x4
-#define RCODE_DATA_ERROR		0x5
-#define RCODE_TYPE_ERROR		0x6
-#define RCODE_ADDRESS_ERROR		0x7
-
-/* Linux firewire-core (Juju) specific rcodes */
-#define RCODE_SEND_ERROR		0x10
-#define RCODE_CANCELLED			0x11
-#define RCODE_BUSY			0x12
-#define RCODE_GENERATION		0x13
-#define RCODE_NO_ACK			0x14
-
-#define SCODE_100			0x0
-#define SCODE_200			0x1
-#define SCODE_400			0x2
-#define SCODE_800			0x3
-#define SCODE_1600			0x4
-#define SCODE_3200			0x5
-#define SCODE_BETA			0x3
-
-#define ACK_COMPLETE			0x1
-#define ACK_PENDING			0x2
-#define ACK_BUSY_X			0x4
-#define ACK_BUSY_A			0x5
-#define ACK_BUSY_B			0x6
-#define ACK_DATA_ERROR			0xd
-#define ACK_TYPE_ERROR			0xe
-
-#define RETRY_1				0x00
-#define RETRY_X				0x01
-#define RETRY_A				0x02
-#define RETRY_B				0x03
-
-#endif /* _LINUX_FIREWIRE_CONSTANTS_H */
diff --git a/ANDROID_3.4.5/include/linux/firewire.h b/ANDROID_3.4.5/include/linux/firewire.h
deleted file mode 100644
index cdc9b719..00000000
--- a/ANDROID_3.4.5/include/linux/firewire.h
+++ /dev/null
@@ -1,440 +0,0 @@
-#ifndef _LINUX_FIREWIRE_H
-#define _LINUX_FIREWIRE_H
-
-#include <linux/completion.h>
-#include <linux/device.h>
-#include <linux/dma-mapping.h>
-#include <linux/kernel.h>
-#include <linux/kref.h>
-#include <linux/list.h>
-#include <linux/mutex.h>
-#include <linux/spinlock.h>
-#include <linux/sysfs.h>
-#include <linux/timer.h>
-#include <linux/types.h>
-#include <linux/workqueue.h>
-
-#include <linux/atomic.h>
-#include <asm/byteorder.h>
-
-#define CSR_REGISTER_BASE		0xfffff0000000ULL
-
-/* register offsets are relative to CSR_REGISTER_BASE */
-#define CSR_STATE_CLEAR			0x0
-#define CSR_STATE_SET			0x4
-#define CSR_NODE_IDS			0x8
-#define CSR_RESET_START			0xc
-#define CSR_SPLIT_TIMEOUT_HI		0x18
-#define CSR_SPLIT_TIMEOUT_LO		0x1c
-#define CSR_CYCLE_TIME			0x200
-#define CSR_BUS_TIME			0x204
-#define CSR_BUSY_TIMEOUT		0x210
-#define CSR_PRIORITY_BUDGET		0x218
-#define CSR_BUS_MANAGER_ID		0x21c
-#define CSR_BANDWIDTH_AVAILABLE		0x220
-#define CSR_CHANNELS_AVAILABLE		0x224
-#define CSR_CHANNELS_AVAILABLE_HI	0x224
-#define CSR_CHANNELS_AVAILABLE_LO	0x228
-#define CSR_MAINT_UTILITY		0x230
-#define CSR_BROADCAST_CHANNEL		0x234
-#define CSR_CONFIG_ROM			0x400
-#define CSR_CONFIG_ROM_END		0x800
-#define CSR_OMPR			0x900
-#define CSR_OPCR(i)			(0x904 + (i) * 4)
-#define CSR_IMPR			0x980
-#define CSR_IPCR(i)			(0x984 + (i) * 4)
-#define CSR_FCP_COMMAND			0xB00
-#define CSR_FCP_RESPONSE		0xD00
-#define CSR_FCP_END			0xF00
-#define CSR_TOPOLOGY_MAP		0x1000
-#define CSR_TOPOLOGY_MAP_END		0x1400
-#define CSR_SPEED_MAP			0x2000
-#define CSR_SPEED_MAP_END		0x3000
-
-#define CSR_OFFSET		0x40
-#define CSR_LEAF		0x80
-#define CSR_DIRECTORY		0xc0
-
-#define CSR_DESCRIPTOR		0x01
-#define CSR_VENDOR		0x03
-#define CSR_HARDWARE_VERSION	0x04
-#define CSR_UNIT		0x11
-#define CSR_SPECIFIER_ID	0x12
-#define CSR_VERSION		0x13
-#define CSR_DEPENDENT_INFO	0x14
-#define CSR_MODEL		0x17
-#define CSR_DIRECTORY_ID	0x20
-
-struct fw_csr_iterator {
-	const u32 *p;
-	const u32 *end;
-};
-
-void fw_csr_iterator_init(struct fw_csr_iterator *ci, const u32 *p);
-int fw_csr_iterator_next(struct fw_csr_iterator *ci, int *key, int *value);
-int fw_csr_string(const u32 *directory, int key, char *buf, size_t size);
-
-extern struct bus_type fw_bus_type;
-
-struct fw_card_driver;
-struct fw_node;
-
-struct fw_card {
-	const struct fw_card_driver *driver;
-	struct device *device;
-	struct kref kref;
-	struct completion done;
-
-	int node_id;
-	int generation;
-	int current_tlabel;
-	u64 tlabel_mask;
-	struct list_head transaction_list;
-	u64 reset_jiffies;
-
-	u32 split_timeout_hi;
-	u32 split_timeout_lo;
-	unsigned int split_timeout_cycles;
-	unsigned int split_timeout_jiffies;
-
-	unsigned long long guid;
-	unsigned max_receive;
-	int link_speed;
-	int config_rom_generation;
-
-	spinlock_t lock; /* Take this lock when handling the lists in
-			  * this struct. */
-	struct fw_node *local_node;
-	struct fw_node *root_node;
-	struct fw_node *irm_node;
-	u8 color; /* must be u8 to match the definition in struct fw_node */
-	int gap_count;
-	bool beta_repeaters_present;
-
-	int index;
-	struct list_head link;
-
-	struct list_head phy_receiver_list;
-
-	struct delayed_work br_work; /* bus reset job */
-	bool br_short;
-
-	struct delayed_work bm_work; /* bus manager job */
-	int bm_retries;
-	int bm_generation;
-	int bm_node_id;
-	bool bm_abdicate;
-
-	bool priority_budget_implemented;	/* controller feature */
-	bool broadcast_channel_auto_allocated;	/* controller feature */
-
-	bool broadcast_channel_allocated;
-	u32 broadcast_channel;
-	__be32 topology_map[(CSR_TOPOLOGY_MAP_END - CSR_TOPOLOGY_MAP) / 4];
-
-	__be32 maint_utility_register;
-};
-
-struct fw_attribute_group {
-	struct attribute_group *groups[2];
-	struct attribute_group group;
-	struct attribute *attrs[12];
-};
-
-enum fw_device_state {
-	FW_DEVICE_INITIALIZING,
-	FW_DEVICE_RUNNING,
-	FW_DEVICE_GONE,
-	FW_DEVICE_SHUTDOWN,
-};
-
-/*
- * Note, fw_device.generation always has to be read before fw_device.node_id.
- * Use SMP memory barriers to ensure this.  Otherwise requests will be sent
- * to an outdated node_id if the generation was updated in the meantime due
- * to a bus reset.
- *
- * Likewise, fw-core will take care to update .node_id before .generation so
- * that whenever fw_device.generation is current WRT the actual bus generation,
- * fw_device.node_id is guaranteed to be current too.
- *
- * The same applies to fw_device.card->node_id vs. fw_device.generation.
- *
- * fw_device.config_rom and fw_device.config_rom_length may be accessed during
- * the lifetime of any fw_unit belonging to the fw_device, before device_del()
- * was called on the last fw_unit.  Alternatively, they may be accessed while
- * holding fw_device_rwsem.
- */
-struct fw_device {
-	atomic_t state;
-	struct fw_node *node;
-	int node_id;
-	int generation;
-	unsigned max_speed;
-	struct fw_card *card;
-	struct device device;
-
-	struct mutex client_list_mutex;
-	struct list_head client_list;
-
-	const u32 *config_rom;
-	size_t config_rom_length;
-	int config_rom_retries;
-	unsigned is_local:1;
-	unsigned max_rec:4;
-	unsigned cmc:1;
-	unsigned irmc:1;
-	unsigned bc_implemented:2;
-
-	struct delayed_work work;
-	struct fw_attribute_group attribute_group;
-};
-
-static inline struct fw_device *fw_device(struct device *dev)
-{
-	return container_of(dev, struct fw_device, device);
-}
-
-static inline int fw_device_is_shutdown(struct fw_device *device)
-{
-	return atomic_read(&device->state) == FW_DEVICE_SHUTDOWN;
-}
-
-int fw_device_enable_phys_dma(struct fw_device *device);
-
-/*
- * fw_unit.directory must not be accessed after device_del(&fw_unit.device).
- */
-struct fw_unit {
-	struct device device;
-	const u32 *directory;
-	struct fw_attribute_group attribute_group;
-};
-
-static inline struct fw_unit *fw_unit(struct device *dev)
-{
-	return container_of(dev, struct fw_unit, device);
-}
-
-static inline struct fw_unit *fw_unit_get(struct fw_unit *unit)
-{
-	get_device(&unit->device);
-
-	return unit;
-}
-
-static inline void fw_unit_put(struct fw_unit *unit)
-{
-	put_device(&unit->device);
-}
-
-static inline struct fw_device *fw_parent_device(struct fw_unit *unit)
-{
-	return fw_device(unit->device.parent);
-}
-
-struct ieee1394_device_id;
-
-struct fw_driver {
-	struct device_driver driver;
-	/* Called when the parent device sits through a bus reset. */
-	void (*update)(struct fw_unit *unit);
-	const struct ieee1394_device_id *id_table;
-};
-
-struct fw_packet;
-struct fw_request;
-
-typedef void (*fw_packet_callback_t)(struct fw_packet *packet,
-				     struct fw_card *card, int status);
-typedef void (*fw_transaction_callback_t)(struct fw_card *card, int rcode,
-					  void *data, size_t length,
-					  void *callback_data);
-/*
- * Important note:  Except for the FCP registers, the callback must guarantee
- * that either fw_send_response() or kfree() is called on the @request.
- */
-typedef void (*fw_address_callback_t)(struct fw_card *card,
-				      struct fw_request *request,
-				      int tcode, int destination, int source,
-				      int generation,
-				      unsigned long long offset,
-				      void *data, size_t length,
-				      void *callback_data);
-
-struct fw_packet {
-	int speed;
-	int generation;
-	u32 header[4];
-	size_t header_length;
-	void *payload;
-	size_t payload_length;
-	dma_addr_t payload_bus;
-	bool payload_mapped;
-	u32 timestamp;
-
-	/*
-	 * This callback is called when the packet transmission has completed.
-	 * For successful transmission, the status code is the ack received
-	 * from the destination.  Otherwise it is one of the juju-specific
-	 * rcodes:  RCODE_SEND_ERROR, _CANCELLED, _BUSY, _GENERATION, _NO_ACK.
-	 * The callback can be called from tasklet context and thus
-	 * must never block.
-	 */
-	fw_packet_callback_t callback;
-	int ack;
-	struct list_head link;
-	void *driver_data;
-};
-
-struct fw_transaction {
-	int node_id; /* The generation is implied; it is always the current. */
-	int tlabel;
-	struct list_head link;
-	struct fw_card *card;
-	bool is_split_transaction;
-	struct timer_list split_timeout_timer;
-
-	struct fw_packet packet;
-
-	/*
-	 * The data passed to the callback is valid only during the
-	 * callback.
-	 */
-	fw_transaction_callback_t callback;
-	void *callback_data;
-};
-
-struct fw_address_handler {
-	u64 offset;
-	size_t length;
-	fw_address_callback_t address_callback;
-	void *callback_data;
-	struct list_head link;
-};
-
-struct fw_address_region {
-	u64 start;
-	u64 end;
-};
-
-extern const struct fw_address_region fw_high_memory_region;
-
-int fw_core_add_address_handler(struct fw_address_handler *handler,
-				const struct fw_address_region *region);
-void fw_core_remove_address_handler(struct fw_address_handler *handler);
-void fw_send_response(struct fw_card *card,
-		      struct fw_request *request, int rcode);
-void fw_send_request(struct fw_card *card, struct fw_transaction *t,
-		     int tcode, int destination_id, int generation, int speed,
-		     unsigned long long offset, void *payload, size_t length,
-		     fw_transaction_callback_t callback, void *callback_data);
-int fw_cancel_transaction(struct fw_card *card,
-			  struct fw_transaction *transaction);
-int fw_run_transaction(struct fw_card *card, int tcode, int destination_id,
-		       int generation, int speed, unsigned long long offset,
-		       void *payload, size_t length);
-
-static inline int fw_stream_packet_destination_id(int tag, int channel, int sy)
-{
-	return tag << 14 | channel << 8 | sy;
-}
-
-struct fw_descriptor {
-	struct list_head link;
-	size_t length;
-	u32 immediate;
-	u32 key;
-	const u32 *data;
-};
-
-int fw_core_add_descriptor(struct fw_descriptor *desc);
-void fw_core_remove_descriptor(struct fw_descriptor *desc);
-
-/*
- * The iso packet format allows for an immediate header/payload part
- * stored in 'header' immediately after the packet info plus an
- * indirect payload part that is pointer to by the 'payload' field.
- * Applications can use one or the other or both to implement simple
- * low-bandwidth streaming (e.g. audio) or more advanced
- * scatter-gather streaming (e.g. assembling video frame automatically).
- */
-struct fw_iso_packet {
-	u16 payload_length;	/* Length of indirect payload		*/
-	u32 interrupt:1;	/* Generate interrupt on this packet	*/
-	u32 skip:1;		/* tx: Set to not send packet at all	*/
-				/* rx: Sync bit, wait for matching sy	*/
-	u32 tag:2;		/* tx: Tag in packet header		*/
-	u32 sy:4;		/* tx: Sy in packet header		*/
-	u32 header_length:8;	/* Length of immediate header		*/
-	u32 header[0];		/* tx: Top of 1394 isoch. data_block	*/
-};
-
-#define FW_ISO_CONTEXT_TRANSMIT			0
-#define FW_ISO_CONTEXT_RECEIVE			1
-#define FW_ISO_CONTEXT_RECEIVE_MULTICHANNEL	2
-
-#define FW_ISO_CONTEXT_MATCH_TAG0	 1
-#define FW_ISO_CONTEXT_MATCH_TAG1	 2
-#define FW_ISO_CONTEXT_MATCH_TAG2	 4
-#define FW_ISO_CONTEXT_MATCH_TAG3	 8
-#define FW_ISO_CONTEXT_MATCH_ALL_TAGS	15
-
-/*
- * An iso buffer is just a set of pages mapped for DMA in the
- * specified direction.  Since the pages are to be used for DMA, they
- * are not mapped into the kernel virtual address space.  We store the
- * DMA address in the page private. The helper function
- * fw_iso_buffer_map() will map the pages into a given vma.
- */
-struct fw_iso_buffer {
-	enum dma_data_direction direction;
-	struct page **pages;
-	int page_count;
-};
-
-int fw_iso_buffer_init(struct fw_iso_buffer *buffer, struct fw_card *card,
-		       int page_count, enum dma_data_direction direction);
-void fw_iso_buffer_destroy(struct fw_iso_buffer *buffer, struct fw_card *card);
-size_t fw_iso_buffer_lookup(struct fw_iso_buffer *buffer, dma_addr_t completed);
-
-struct fw_iso_context;
-typedef void (*fw_iso_callback_t)(struct fw_iso_context *context,
-				  u32 cycle, size_t header_length,
-				  void *header, void *data);
-typedef void (*fw_iso_mc_callback_t)(struct fw_iso_context *context,
-				     dma_addr_t completed, void *data);
-struct fw_iso_context {
-	struct fw_card *card;
-	int type;
-	int channel;
-	int speed;
-	size_t header_size;
-	union {
-		fw_iso_callback_t sc;
-		fw_iso_mc_callback_t mc;
-	} callback;
-	void *callback_data;
-};
-
-struct fw_iso_context *fw_iso_context_create(struct fw_card *card,
-		int type, int channel, int speed, size_t header_size,
-		fw_iso_callback_t callback, void *callback_data);
-int fw_iso_context_set_channels(struct fw_iso_context *ctx, u64 *channels);
-int fw_iso_context_queue(struct fw_iso_context *ctx,
-			 struct fw_iso_packet *packet,
-			 struct fw_iso_buffer *buffer,
-			 unsigned long payload);
-void fw_iso_context_queue_flush(struct fw_iso_context *ctx);
-int fw_iso_context_flush_completions(struct fw_iso_context *ctx);
-int fw_iso_context_start(struct fw_iso_context *ctx,
-			 int cycle, int sync, int tags);
-int fw_iso_context_stop(struct fw_iso_context *ctx);
-void fw_iso_context_destroy(struct fw_iso_context *ctx);
-void fw_iso_resource_manage(struct fw_card *card, int generation,
-			    u64 channels_mask, int *channel, int *bandwidth,
-			    bool allocate);
-
-extern struct workqueue_struct *fw_workqueue;
-
-#endif /* _LINUX_FIREWIRE_H */
diff --git a/ANDROID_3.4.5/include/linux/firmware-map.h b/ANDROID_3.4.5/include/linux/firmware-map.h
deleted file mode 100644
index 43fe52fc..00000000
--- a/ANDROID_3.4.5/include/linux/firmware-map.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * include/linux/firmware-map.h:
- *  Copyright (C) 2008 SUSE LINUX Products GmbH
- *  by Bernhard Walle <bernhard.walle@gmx.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License v2.0 as published by
- * the Free Software Foundation
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-#ifndef _LINUX_FIRMWARE_MAP_H
-#define _LINUX_FIRMWARE_MAP_H
-
-#include <linux/list.h>
-
-/*
- * provide a dummy interface if CONFIG_FIRMWARE_MEMMAP is disabled
- */
-#ifdef CONFIG_FIRMWARE_MEMMAP
-
-int firmware_map_add_early(u64 start, u64 end, const char *type);
-int firmware_map_add_hotplug(u64 start, u64 end, const char *type);
-
-#else /* CONFIG_FIRMWARE_MEMMAP */
-
-static inline int firmware_map_add_early(u64 start, u64 end, const char *type)
-{
-	return 0;
-}
-
-static inline int firmware_map_add_hotplug(u64 start, u64 end, const char *type)
-{
-	return 0;
-}
-
-#endif /* CONFIG_FIRMWARE_MEMMAP */
-
-#endif /* _LINUX_FIRMWARE_MAP_H */
diff --git a/ANDROID_3.4.5/include/linux/firmware.h b/ANDROID_3.4.5/include/linux/firmware.h
deleted file mode 100644
index 1e7c0118..00000000
--- a/ANDROID_3.4.5/include/linux/firmware.h
+++ /dev/null
@@ -1,67 +0,0 @@
-#ifndef _LINUX_FIRMWARE_H
-#define _LINUX_FIRMWARE_H
-
-#include <linux/types.h>
-#include <linux/compiler.h>
-#include <linux/gfp.h>
-
-#define FW_ACTION_NOHOTPLUG 0
-#define FW_ACTION_HOTPLUG 1
-
-struct firmware {
-	size_t size;
-	const u8 *data;
-	struct page **pages;
-};
-
-struct module;
-struct device;
-
-struct builtin_fw {
-	char *name;
-	void *data;
-	unsigned long size;
-};
-
-/* We have to play tricks here much like stringify() to get the
-   __COUNTER__ macro to be expanded as we want it */
-#define __fw_concat1(x, y) x##y
-#define __fw_concat(x, y) __fw_concat1(x, y)
-
-#define DECLARE_BUILTIN_FIRMWARE(name, blob)				     \
-	DECLARE_BUILTIN_FIRMWARE_SIZE(name, &(blob), sizeof(blob))
-
-#define DECLARE_BUILTIN_FIRMWARE_SIZE(name, blob, size)			     \
-	static const struct builtin_fw __fw_concat(__builtin_fw,__COUNTER__) \
-	__used __section(.builtin_fw) = { name, blob, size }
-
-#if defined(CONFIG_FW_LOADER) || (defined(CONFIG_FW_LOADER_MODULE) && defined(MODULE))
-int request_firmware(const struct firmware **fw, const char *name,
-		     struct device *device);
-int request_firmware_nowait(
-	struct module *module, bool uevent,
-	const char *name, struct device *device, gfp_t gfp, void *context,
-	void (*cont)(const struct firmware *fw, void *context));
-
-void release_firmware(const struct firmware *fw);
-#else
-static inline int request_firmware(const struct firmware **fw,
-				   const char *name,
-				   struct device *device)
-{
-	return -EINVAL;
-}
-static inline int request_firmware_nowait(
-	struct module *module, bool uevent,
-	const char *name, struct device *device, gfp_t gfp, void *context,
-	void (*cont)(const struct firmware *fw, void *context))
-{
-	return -EINVAL;
-}
-
-static inline void release_firmware(const struct firmware *fw)
-{
-}
-#endif
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/flat.h b/ANDROID_3.4.5/include/linux/flat.h
deleted file mode 100644
index ec56852e..00000000
--- a/ANDROID_3.4.5/include/linux/flat.h
+++ /dev/null
@@ -1,100 +0,0 @@
-/*
- * Copyright (C) 2002-2003  David McCullough <davidm@snapgear.com>
- * Copyright (C) 1998       Kenneth Albanowski <kjahds@kjahds.com>
- *                          The Silver Hammer Group, Ltd.
- *
- * This file provides the definitions and structures needed to
- * support uClinux flat-format executables.
- */
-
-#ifndef _LINUX_FLAT_H
-#define _LINUX_FLAT_H
-
-#ifdef __KERNEL__
-#include <asm/flat.h>
-#endif
-
-#define	FLAT_VERSION			0x00000004L
-
-#ifdef CONFIG_BINFMT_SHARED_FLAT
-#define	MAX_SHARED_LIBS			(4)
-#else
-#define	MAX_SHARED_LIBS			(1)
-#endif
-
-/*
- * To make everything easier to port and manage cross platform
- * development,  all fields are in network byte order.
- */
-
-struct flat_hdr {
-	char magic[4];
-	unsigned long rev;          /* version (as above) */
-	unsigned long entry;        /* Offset of first executable instruction
-	                               with text segment from beginning of file */
-	unsigned long data_start;   /* Offset of data segment from beginning of
-	                               file */
-	unsigned long data_end;     /* Offset of end of data segment
-	                               from beginning of file */
-	unsigned long bss_end;      /* Offset of end of bss segment from beginning
-	                               of file */
-
-	/* (It is assumed that data_end through bss_end forms the bss segment.) */
-
-	unsigned long stack_size;   /* Size of stack, in bytes */
-	unsigned long reloc_start;  /* Offset of relocation records from
-	                               beginning of file */
-	unsigned long reloc_count;  /* Number of relocation records */
-	unsigned long flags;       
-	unsigned long build_date;   /* When the program/library was built */
-	unsigned long filler[5];    /* Reservered, set to zero */
-};
-
-#define FLAT_FLAG_RAM    0x0001 /* load program entirely into RAM */
-#define FLAT_FLAG_GOTPIC 0x0002 /* program is PIC with GOT */
-#define FLAT_FLAG_GZIP   0x0004 /* all but the header is compressed */
-#define FLAT_FLAG_GZDATA 0x0008 /* only data/relocs are compressed (for XIP) */
-#define FLAT_FLAG_KTRACE 0x0010 /* output useful kernel trace for debugging */
-
-
-#ifdef __KERNEL__ /* so systems without linux headers can compile the apps */
-/*
- * While it would be nice to keep this header clean,  users of older
- * tools still need this support in the kernel.  So this section is
- * purely for compatibility with old tool chains.
- *
- * DO NOT make changes or enhancements to the old format please,  just work
- *        with the format above,  except to fix bugs with old format support.
- */
-
-#include <asm/byteorder.h>
-
-#define	OLD_FLAT_VERSION			0x00000002L
-#define OLD_FLAT_RELOC_TYPE_TEXT	0
-#define OLD_FLAT_RELOC_TYPE_DATA	1
-#define OLD_FLAT_RELOC_TYPE_BSS		2
-
-typedef union {
-	unsigned long	value;
-	struct {
-# if defined(mc68000) && !defined(CONFIG_COLDFIRE)
-		signed long offset : 30;
-		unsigned long type : 2;
-#   	define OLD_FLAT_FLAG_RAM    0x1 /* load program entirely into RAM */
-# elif defined(__BIG_ENDIAN_BITFIELD)
-		unsigned long type : 2;
-		signed long offset : 30;
-#   	define OLD_FLAT_FLAG_RAM    0x1 /* load program entirely into RAM */
-# elif defined(__LITTLE_ENDIAN_BITFIELD)
-		signed long offset : 30;
-		unsigned long type : 2;
-#   	define OLD_FLAT_FLAG_RAM    0x1 /* load program entirely into RAM */
-# else
-#   	error "Unknown bitfield order for flat files."
-# endif
-	} reloc;
-} flat_v2_reloc_t;
-
-#endif /* __KERNEL__ */
-
-#endif /* _LINUX_FLAT_H */
diff --git a/ANDROID_3.4.5/include/linux/flex_array.h b/ANDROID_3.4.5/include/linux/flex_array.h
deleted file mode 100644
index 6843cf19..00000000
--- a/ANDROID_3.4.5/include/linux/flex_array.h
+++ /dev/null
@@ -1,80 +0,0 @@
-#ifndef _FLEX_ARRAY_H
-#define _FLEX_ARRAY_H
-
-#include <linux/types.h>
-#include <asm/page.h>
-
-#define FLEX_ARRAY_PART_SIZE PAGE_SIZE
-#define FLEX_ARRAY_BASE_SIZE PAGE_SIZE
-
-struct flex_array_part;
-
-/*
- * This is meant to replace cases where an array-like
- * structure has gotten too big to fit into kmalloc()
- * and the developer is getting tempted to use
- * vmalloc().
- */
-
-struct flex_array {
-	union {
-		struct {
-			int element_size;
-			int total_nr_elements;
-			int elems_per_part;
-			u32 reciprocal_elems;
-			struct flex_array_part *parts[];
-		};
-		/*
-		 * This little trick makes sure that
-		 * sizeof(flex_array) == PAGE_SIZE
-		 */
-		char padding[FLEX_ARRAY_BASE_SIZE];
-	};
-};
-
-/* Number of bytes left in base struct flex_array, excluding metadata */
-#define FLEX_ARRAY_BASE_BYTES_LEFT					\
-	(FLEX_ARRAY_BASE_SIZE - offsetof(struct flex_array, parts))
-
-/* Number of pointers in base to struct flex_array_part pages */
-#define FLEX_ARRAY_NR_BASE_PTRS						\
-	(FLEX_ARRAY_BASE_BYTES_LEFT / sizeof(struct flex_array_part *))
-
-/* Number of elements of size that fit in struct flex_array_part */
-#define FLEX_ARRAY_ELEMENTS_PER_PART(size)				\
-	(FLEX_ARRAY_PART_SIZE / size)
-
-/*
- * Defines a statically allocated flex array and ensures its parameters are
- * valid.
- */
-#define DEFINE_FLEX_ARRAY(__arrayname, __element_size, __total)		\
-	struct flex_array __arrayname = { { {				\
-		.element_size = (__element_size),			\
-		.total_nr_elements = (__total),				\
-	} } };								\
-	static inline void __arrayname##_invalid_parameter(void)	\
-	{								\
-		BUILD_BUG_ON((__total) > FLEX_ARRAY_NR_BASE_PTRS *	\
-			FLEX_ARRAY_ELEMENTS_PER_PART(__element_size));	\
-	}
-
-struct flex_array *flex_array_alloc(int element_size, unsigned int total,
-		gfp_t flags);
-int flex_array_prealloc(struct flex_array *fa, unsigned int start,
-		unsigned int nr_elements, gfp_t flags);
-void flex_array_free(struct flex_array *fa);
-void flex_array_free_parts(struct flex_array *fa);
-int flex_array_put(struct flex_array *fa, unsigned int element_nr, void *src,
-		gfp_t flags);
-int flex_array_clear(struct flex_array *fa, unsigned int element_nr);
-void *flex_array_get(struct flex_array *fa, unsigned int element_nr);
-int flex_array_shrink(struct flex_array *fa);
-
-#define flex_array_put_ptr(fa, nr, src, gfp) \
-	flex_array_put(fa, nr, (void *)&(src), gfp)
-
-void *flex_array_get_ptr(struct flex_array *fa, unsigned int element_nr);
-
-#endif /* _FLEX_ARRAY_H */
diff --git a/ANDROID_3.4.5/include/linux/font.h b/ANDROID_3.4.5/include/linux/font.h
deleted file mode 100644
index 40a24ab4..00000000
--- a/ANDROID_3.4.5/include/linux/font.h
+++ /dev/null
@@ -1,58 +0,0 @@
-/*
- *  font.h -- `Soft' font definitions
- *
- *  Created 1995 by Geert Uytterhoeven
- *
- *  This file is subject to the terms and conditions of the GNU General Public
- *  License.  See the file COPYING in the main directory of this archive
- *  for more details.
- */
-
-#ifndef _VIDEO_FONT_H
-#define _VIDEO_FONT_H
-
-#include <linux/types.h>
-
-struct font_desc {
-    int idx;
-    const char *name;
-    int width, height;
-    const void *data;
-    int pref;
-};
-
-#define VGA8x8_IDX	0
-#define VGA8x16_IDX	1
-#define PEARL8x8_IDX	2
-#define VGA6x11_IDX	3
-#define FONT7x14_IDX	4
-#define	FONT10x18_IDX	5
-#define SUN8x16_IDX	6
-#define SUN12x22_IDX	7
-#define ACORN8x8_IDX	8
-#define	MINI4x6_IDX	9
-
-extern const struct font_desc	font_vga_8x8,
-			font_vga_8x16,
-			font_pearl_8x8,
-			font_vga_6x11,
-			font_7x14,
-			font_10x18,
-			font_sun_8x16,
-			font_sun_12x22,
-			font_acorn_8x8,
-			font_mini_4x6;
-
-/* Find a font with a specific name */
-
-extern const struct font_desc *find_font(const char *name);
-
-/* Get the default font for a specific screen size */
-
-extern const struct font_desc *get_default_font(int xres, int yres,
-						u32 font_w, u32 font_h);
-
-/* Max. length for the name of a predefined font */
-#define MAX_FONT_NAME	32
-
-#endif /* _VIDEO_FONT_H */
diff --git a/ANDROID_3.4.5/include/linux/freezer.h b/ANDROID_3.4.5/include/linux/freezer.h
deleted file mode 100644
index a628084e..00000000
--- a/ANDROID_3.4.5/include/linux/freezer.h
+++ /dev/null
@@ -1,214 +0,0 @@
-/* Freezer declarations */
-
-#ifndef FREEZER_H_INCLUDED
-#define FREEZER_H_INCLUDED
-
-#include <linux/sched.h>
-#include <linux/wait.h>
-#include <linux/atomic.h>
-
-#ifdef CONFIG_FREEZER
-extern atomic_t system_freezing_cnt;	/* nr of freezing conds in effect */
-extern bool pm_freezing;		/* PM freezing in effect */
-extern bool pm_nosig_freezing;		/* PM nosig freezing in effect */
-
-/*
- * Check if a process has been frozen
- */
-static inline bool frozen(struct task_struct *p)
-{
-	return p->flags & PF_FROZEN;
-}
-
-extern bool freezing_slow_path(struct task_struct *p);
-
-/*
- * Check if there is a request to freeze a process
- */
-static inline bool freezing(struct task_struct *p)
-{
-	if (likely(!atomic_read(&system_freezing_cnt)))
-		return false;
-	return freezing_slow_path(p);
-}
-
-/* Takes and releases task alloc lock using task_lock() */
-extern void __thaw_task(struct task_struct *t);
-
-extern bool __refrigerator(bool check_kthr_stop);
-extern int freeze_processes(void);
-extern int freeze_kernel_threads(void);
-extern void thaw_processes(void);
-extern void thaw_kernel_threads(void);
-
-/*
- * HACK: prevent sleeping while atomic warnings due to ARM signal handling
- * disabling irqs
- */
-static inline bool try_to_freeze_nowarn(void)
-{
-	if (likely(!freezing(current)))
-		return false;
-	return __refrigerator(false);
-}
-
-static inline bool try_to_freeze(void)
-{
-	might_sleep();
-	if (likely(!freezing(current)))
-		return false;
-	return __refrigerator(false);
-}
-
-extern bool freeze_task(struct task_struct *p);
-extern bool set_freezable(void);
-
-#ifdef CONFIG_CGROUP_FREEZER
-extern bool cgroup_freezing(struct task_struct *task);
-#else /* !CONFIG_CGROUP_FREEZER */
-static inline bool cgroup_freezing(struct task_struct *task)
-{
-	return false;
-}
-#endif /* !CONFIG_CGROUP_FREEZER */
-
-/*
- * The PF_FREEZER_SKIP flag should be set by a vfork parent right before it
- * calls wait_for_completion(&vfork) and reset right after it returns from this
- * function.  Next, the parent should call try_to_freeze() to freeze itself
- * appropriately in case the child has exited before the freezing of tasks is
- * complete.  However, we don't want kernel threads to be frozen in unexpected
- * places, so we allow them to block freeze_processes() instead or to set
- * PF_NOFREEZE if needed. Fortunately, in the ____call_usermodehelper() case the
- * parent won't really block freeze_processes(), since ____call_usermodehelper()
- * (the child) does a little before exec/exit and it can't be frozen before
- * waking up the parent.
- */
-
-
-/* Tell the freezer not to count the current task as freezable. */
-static inline void freezer_do_not_count(void)
-{
-	current->flags |= PF_FREEZER_SKIP;
-}
-
-/*
- * Tell the freezer to count the current task as freezable again and try to
- * freeze it.
- */
-static inline void freezer_count(void)
-{
-	current->flags &= ~PF_FREEZER_SKIP;
-	try_to_freeze();
-}
-
-/*
- * Check if the task should be counted as freezable by the freezer
- */
-static inline int freezer_should_skip(struct task_struct *p)
-{
-	return !!(p->flags & PF_FREEZER_SKIP);
-}
-
-/*
- * These macros are intended to be used whenever you want allow a task that's
- * sleeping in TASK_UNINTERRUPTIBLE or TASK_KILLABLE state to be frozen. Note
- * that neither return any clear indication of whether a freeze event happened
- * while in this function.
- */
-
-/* Like schedule(), but should not block the freezer. */
-#define freezable_schedule()						\
-({									\
-	freezer_do_not_count();						\
-	schedule();							\
-	freezer_count();						\
-})
-
-/* Like schedule_timeout_killable(), but should not block the freezer. */
-#define freezable_schedule_timeout_killable(timeout)			\
-({									\
-	long __retval;							\
-	freezer_do_not_count();						\
-	__retval = schedule_timeout_killable(timeout);			\
-	freezer_count();						\
-	__retval;							\
-})
-
-/*
- * Freezer-friendly wrappers around wait_event_interruptible(),
- * wait_event_killable() and wait_event_interruptible_timeout(), originally
- * defined in <linux/wait.h>
- */
-
-#define wait_event_freezekillable(wq, condition)			\
-({									\
-	int __retval;							\
-	freezer_do_not_count();						\
-	__retval = wait_event_killable(wq, (condition));		\
-	freezer_count();						\
-	__retval;							\
-})
-
-#define wait_event_freezable(wq, condition)				\
-({									\
-	int __retval;							\
-	for (;;) {							\
-		__retval = wait_event_interruptible(wq, 		\
-				(condition) || freezing(current));	\
-		if (__retval || (condition))				\
-			break;						\
-		try_to_freeze();					\
-	}								\
-	__retval;							\
-})
-
-#define wait_event_freezable_timeout(wq, condition, timeout)		\
-({									\
-	long __retval = timeout;					\
-	for (;;) {							\
-		__retval = wait_event_interruptible_timeout(wq,		\
-				(condition) || freezing(current),	\
-				__retval); 				\
-		if (__retval <= 0 || (condition))			\
-			break;						\
-		try_to_freeze();					\
-	}								\
-	__retval;							\
-})
-
-#else /* !CONFIG_FREEZER */
-static inline bool frozen(struct task_struct *p) { return false; }
-static inline bool freezing(struct task_struct *p) { return false; }
-static inline void __thaw_task(struct task_struct *t) {}
-
-static inline bool __refrigerator(bool check_kthr_stop) { return false; }
-static inline int freeze_processes(void) { return -ENOSYS; }
-static inline int freeze_kernel_threads(void) { return -ENOSYS; }
-static inline void thaw_processes(void) {}
-static inline void thaw_kernel_threads(void) {}
-
-static inline bool try_to_freeze(void) { return false; }
-
-static inline void freezer_do_not_count(void) {}
-static inline void freezer_count(void) {}
-static inline int freezer_should_skip(struct task_struct *p) { return 0; }
-static inline void set_freezable(void) {}
-
-#define freezable_schedule()  schedule()
-
-#define freezable_schedule_timeout_killable(timeout)			\
-	schedule_timeout_killable(timeout)
-
-#define wait_event_freezable(wq, condition)				\
-		wait_event_interruptible(wq, condition)
-
-#define wait_event_freezable_timeout(wq, condition, timeout)		\
-		wait_event_interruptible_timeout(wq, condition, timeout)
-
-#define wait_event_freezekillable(wq, condition)		\
-		wait_event_killable(wq, condition)
-
-#endif /* !CONFIG_FREEZER */
-
-#endif	/* FREEZER_H_INCLUDED */
diff --git a/ANDROID_3.4.5/include/linux/fs.h b/ANDROID_3.4.5/include/linux/fs.h
deleted file mode 100644
index 25c40b9f..00000000
--- a/ANDROID_3.4.5/include/linux/fs.h
+++ /dev/null
@@ -1,2676 +0,0 @@
-#ifndef _LINUX_FS_H
-#define _LINUX_FS_H
-
-/*
- * This file has definitions for some important file table
- * structures etc.
- */
-
-#include <linux/limits.h>
-#include <linux/ioctl.h>
-#include <linux/blk_types.h>
-#include <linux/types.h>
-
-/*
- * It's silly to have NR_OPEN bigger than NR_FILE, but you can change
- * the file limit at runtime and only root can increase the per-process
- * nr_file rlimit, so it's safe to set up a ridiculously high absolute
- * upper limit on files-per-process.
- *
- * Some programs (notably those using select()) may have to be 
- * recompiled to take full advantage of the new limits..  
- */
-
-/* Fixed constants first: */
-#undef NR_OPEN
-#define INR_OPEN_CUR 1024	/* Initial setting for nfile rlimits */
-#define INR_OPEN_MAX 4096	/* Hard limit for nfile rlimits */
-
-#define BLOCK_SIZE_BITS 10
-#define BLOCK_SIZE (1<<BLOCK_SIZE_BITS)
-
-#define SEEK_SET	0	/* seek relative to beginning of file */
-#define SEEK_CUR	1	/* seek relative to current file position */
-#define SEEK_END	2	/* seek relative to end of file */
-#define SEEK_DATA	3	/* seek to the next data */
-#define SEEK_HOLE	4	/* seek to the next hole */
-#define SEEK_MAX	SEEK_HOLE
-
-struct fstrim_range {
-	__u64 start;
-	__u64 len;
-	__u64 minlen;
-};
-
-/* And dynamically-tunable limits and defaults: */
-struct files_stat_struct {
-	unsigned long nr_files;		/* read only */
-	unsigned long nr_free_files;	/* read only */
-	unsigned long max_files;		/* tunable */
-};
-
-struct inodes_stat_t {
-	int nr_inodes;
-	int nr_unused;
-	int dummy[5];		/* padding for sysctl ABI compatibility */
-};
-
-
-#define NR_FILE  8192	/* this can well be larger on a larger system */
-
-#define MAY_EXEC		0x00000001
-#define MAY_WRITE		0x00000002
-#define MAY_READ		0x00000004
-#define MAY_APPEND		0x00000008
-#define MAY_ACCESS		0x00000010
-#define MAY_OPEN		0x00000020
-#define MAY_CHDIR		0x00000040
-/* called from RCU mode, don't block */
-#define MAY_NOT_BLOCK		0x00000080
-
-/*
- * flags in file.f_mode.  Note that FMODE_READ and FMODE_WRITE must correspond
- * to O_WRONLY and O_RDWR via the strange trick in __dentry_open()
- */
-
-/* file is open for reading */
-#define FMODE_READ		((__force fmode_t)0x1)
-/* file is open for writing */
-#define FMODE_WRITE		((__force fmode_t)0x2)
-/* file is seekable */
-#define FMODE_LSEEK		((__force fmode_t)0x4)
-/* file can be accessed using pread */
-#define FMODE_PREAD		((__force fmode_t)0x8)
-/* file can be accessed using pwrite */
-#define FMODE_PWRITE		((__force fmode_t)0x10)
-/* File is opened for execution with sys_execve / sys_uselib */
-#define FMODE_EXEC		((__force fmode_t)0x20)
-/* File is opened with O_NDELAY (only set for block devices) */
-#define FMODE_NDELAY		((__force fmode_t)0x40)
-/* File is opened with O_EXCL (only set for block devices) */
-#define FMODE_EXCL		((__force fmode_t)0x80)
-/* File is opened using open(.., 3, ..) and is writeable only for ioctls
-   (specialy hack for floppy.c) */
-#define FMODE_WRITE_IOCTL	((__force fmode_t)0x100)
-/* 32bit hashes as llseek() offset (for directories) */
-#define FMODE_32BITHASH         ((__force fmode_t)0x200)
-/* 64bit hashes as llseek() offset (for directories) */
-#define FMODE_64BITHASH         ((__force fmode_t)0x400)
-
-/*
- * Don't update ctime and mtime.
- *
- * Currently a special hack for the XFS open_by_handle ioctl, but we'll
- * hopefully graduate it to a proper O_CMTIME flag supported by open(2) soon.
- */
-#define FMODE_NOCMTIME		((__force fmode_t)0x800)
-
-/* Expect random access pattern */
-#define FMODE_RANDOM		((__force fmode_t)0x1000)
-
-/* File is huge (eg. /dev/kmem): treat loff_t as unsigned */
-#define FMODE_UNSIGNED_OFFSET	((__force fmode_t)0x2000)
-
-/* File is opened with O_PATH; almost nothing can be done with it */
-#define FMODE_PATH		((__force fmode_t)0x4000)
-
-/* File was opened by fanotify and shouldn't generate fanotify events */
-#define FMODE_NONOTIFY		((__force fmode_t)0x1000000)
-
-/*
- * The below are the various read and write types that we support. Some of
- * them include behavioral modifiers that send information down to the
- * block layer and IO scheduler. Terminology:
- *
- *	The block layer uses device plugging to defer IO a little bit, in
- *	the hope that we will see more IO very shortly. This increases
- *	coalescing of adjacent IO and thus reduces the number of IOs we
- *	have to send to the device. It also allows for better queuing,
- *	if the IO isn't mergeable. If the caller is going to be waiting
- *	for the IO, then he must ensure that the device is unplugged so
- *	that the IO is dispatched to the driver.
- *
- *	All IO is handled async in Linux. This is fine for background
- *	writes, but for reads or writes that someone waits for completion
- *	on, we want to notify the block layer and IO scheduler so that they
- *	know about it. That allows them to make better scheduling
- *	decisions. So when the below references 'sync' and 'async', it
- *	is referencing this priority hint.
- *
- * With that in mind, the available types are:
- *
- * READ			A normal read operation. Device will be plugged.
- * READ_SYNC		A synchronous read. Device is not plugged, caller can
- *			immediately wait on this read without caring about
- *			unplugging.
- * READA		Used for read-ahead operations. Lower priority, and the
- *			block layer could (in theory) choose to ignore this
- *			request if it runs into resource problems.
- * WRITE		A normal async write. Device will be plugged.
- * WRITE_SYNC		Synchronous write. Identical to WRITE, but passes down
- *			the hint that someone will be waiting on this IO
- *			shortly. The write equivalent of READ_SYNC.
- * WRITE_ODIRECT	Special case write for O_DIRECT only.
- * WRITE_FLUSH		Like WRITE_SYNC but with preceding cache flush.
- * WRITE_FUA		Like WRITE_SYNC but data is guaranteed to be on
- *			non-volatile media on completion.
- * WRITE_FLUSH_FUA	Combination of WRITE_FLUSH and FUA. The IO is preceded
- *			by a cache flush and data is guaranteed to be on
- *			non-volatile media on completion.
- *
- */
-#define RW_MASK			REQ_WRITE
-#define RWA_MASK		REQ_RAHEAD
-
-#define READ			0
-#define WRITE			RW_MASK
-#define READA			RWA_MASK
-
-#define READ_SYNC		(READ | REQ_SYNC)
-#define WRITE_SYNC		(WRITE | REQ_SYNC | REQ_NOIDLE)
-#define WRITE_ODIRECT		(WRITE | REQ_SYNC)
-#define WRITE_FLUSH		(WRITE | REQ_SYNC | REQ_NOIDLE | REQ_FLUSH)
-#define WRITE_FUA		(WRITE | REQ_SYNC | REQ_NOIDLE | REQ_FUA)
-#define WRITE_FLUSH_FUA		(WRITE | REQ_SYNC | REQ_NOIDLE | REQ_FLUSH | REQ_FUA)
-
-#define SEL_IN		1
-#define SEL_OUT		2
-#define SEL_EX		4
-
-/* public flags for file_system_type */
-#define FS_REQUIRES_DEV 1 
-#define FS_BINARY_MOUNTDATA 2
-#define FS_HAS_SUBTYPE 4
-#define FS_REVAL_DOT	16384	/* Check the paths ".", ".." for staleness */
-#define FS_RENAME_DOES_D_MOVE	32768	/* FS will handle d_move()
-					 * during rename() internally.
-					 */
-
-/*
- * These are the fs-independent mount-flags: up to 32 flags are supported
- */
-#define MS_RDONLY	 1	/* Mount read-only */
-#define MS_NOSUID	 2	/* Ignore suid and sgid bits */
-#define MS_NODEV	 4	/* Disallow access to device special files */
-#define MS_NOEXEC	 8	/* Disallow program execution */
-#define MS_SYNCHRONOUS	16	/* Writes are synced at once */
-#define MS_REMOUNT	32	/* Alter flags of a mounted FS */
-#define MS_MANDLOCK	64	/* Allow mandatory locks on an FS */
-#define MS_DIRSYNC	128	/* Directory modifications are synchronous */
-#define MS_NOATIME	1024	/* Do not update access times. */
-#define MS_NODIRATIME	2048	/* Do not update directory access times */
-#define MS_BIND		4096
-#define MS_MOVE		8192
-#define MS_REC		16384
-#define MS_VERBOSE	32768	/* War is peace. Verbosity is silence.
-				   MS_VERBOSE is deprecated. */
-#define MS_SILENT	32768
-#define MS_POSIXACL	(1<<16)	/* VFS does not apply the umask */
-#define MS_UNBINDABLE	(1<<17)	/* change to unbindable */
-#define MS_PRIVATE	(1<<18)	/* change to private */
-#define MS_SLAVE	(1<<19)	/* change to slave */
-#define MS_SHARED	(1<<20)	/* change to shared */
-#define MS_RELATIME	(1<<21)	/* Update atime relative to mtime/ctime. */
-#define MS_KERNMOUNT	(1<<22) /* this is a kern_mount call */
-#define MS_I_VERSION	(1<<23) /* Update inode I_version field */
-#define MS_STRICTATIME	(1<<24) /* Always perform atime updates */
-#define MS_NOSEC	(1<<28)
-#define MS_BORN		(1<<29)
-#define MS_ACTIVE	(1<<30)
-#define MS_NOUSER	(1<<31)
-
-/*
- * Superblock flags that can be altered by MS_REMOUNT
- */
-#define MS_RMT_MASK	(MS_RDONLY|MS_SYNCHRONOUS|MS_MANDLOCK|MS_I_VERSION)
-
-/*
- * Old magic mount flag and mask
- */
-#define MS_MGC_VAL 0xC0ED0000
-#define MS_MGC_MSK 0xffff0000
-
-/* Inode flags - they have nothing to superblock flags now */
-
-#define S_SYNC		1	/* Writes are synced at once */
-#define S_NOATIME	2	/* Do not update access times */
-#define S_APPEND	4	/* Append-only file */
-#define S_IMMUTABLE	8	/* Immutable file */
-#define S_DEAD		16	/* removed, but still open directory */
-#define S_NOQUOTA	32	/* Inode is not counted to quota */
-#define S_DIRSYNC	64	/* Directory modifications are synchronous */
-#define S_NOCMTIME	128	/* Do not update file c/mtime */
-#define S_SWAPFILE	256	/* Do not truncate: swapon got its bmaps */
-#define S_PRIVATE	512	/* Inode is fs-internal */
-#define S_IMA		1024	/* Inode has an associated IMA struct */
-#define S_AUTOMOUNT	2048	/* Automount/referral quasi-directory */
-#define S_NOSEC		4096	/* no suid or xattr security attributes */
-
-/*
- * Note that nosuid etc flags are inode-specific: setting some file-system
- * flags just means all the inodes inherit those flags by default. It might be
- * possible to override it selectively if you really wanted to with some
- * ioctl() that is not currently implemented.
- *
- * Exception: MS_RDONLY is always applied to the entire file system.
- *
- * Unfortunately, it is possible to change a filesystems flags with it mounted
- * with files in use.  This means that all of the inodes will not have their
- * i_flags updated.  Hence, i_flags no longer inherit the superblock mount
- * flags, so these have to be checked separately. -- rmk@arm.uk.linux.org
- */
-#define __IS_FLG(inode,flg) ((inode)->i_sb->s_flags & (flg))
-
-#define IS_RDONLY(inode) ((inode)->i_sb->s_flags & MS_RDONLY)
-#define IS_SYNC(inode)		(__IS_FLG(inode, MS_SYNCHRONOUS) || \
-					((inode)->i_flags & S_SYNC))
-#define IS_DIRSYNC(inode)	(__IS_FLG(inode, MS_SYNCHRONOUS|MS_DIRSYNC) || \
-					((inode)->i_flags & (S_SYNC|S_DIRSYNC)))
-#define IS_MANDLOCK(inode)	__IS_FLG(inode, MS_MANDLOCK)
-#define IS_NOATIME(inode)   __IS_FLG(inode, MS_RDONLY|MS_NOATIME)
-#define IS_I_VERSION(inode)   __IS_FLG(inode, MS_I_VERSION)
-
-#define IS_NOQUOTA(inode)	((inode)->i_flags & S_NOQUOTA)
-#define IS_APPEND(inode)	((inode)->i_flags & S_APPEND)
-#define IS_IMMUTABLE(inode)	((inode)->i_flags & S_IMMUTABLE)
-#define IS_POSIXACL(inode)	__IS_FLG(inode, MS_POSIXACL)
-
-#define IS_DEADDIR(inode)	((inode)->i_flags & S_DEAD)
-#define IS_NOCMTIME(inode)	((inode)->i_flags & S_NOCMTIME)
-#define IS_SWAPFILE(inode)	((inode)->i_flags & S_SWAPFILE)
-#define IS_PRIVATE(inode)	((inode)->i_flags & S_PRIVATE)
-#define IS_IMA(inode)		((inode)->i_flags & S_IMA)
-#define IS_AUTOMOUNT(inode)	((inode)->i_flags & S_AUTOMOUNT)
-#define IS_NOSEC(inode)		((inode)->i_flags & S_NOSEC)
-
-/* the read-only stuff doesn't really belong here, but any other place is
-   probably as bad and I don't want to create yet another include file. */
-
-#define BLKROSET   _IO(0x12,93)	/* set device read-only (0 = read-write) */
-#define BLKROGET   _IO(0x12,94)	/* get read-only status (0 = read_write) */
-#define BLKRRPART  _IO(0x12,95)	/* re-read partition table */
-#define BLKGETSIZE _IO(0x12,96)	/* return device size /512 (long *arg) */
-#define BLKFLSBUF  _IO(0x12,97)	/* flush buffer cache */
-#define BLKRASET   _IO(0x12,98)	/* set read ahead for block device */
-#define BLKRAGET   _IO(0x12,99)	/* get current read ahead setting */
-#define BLKFRASET  _IO(0x12,100)/* set filesystem (mm/filemap.c) read-ahead */
-#define BLKFRAGET  _IO(0x12,101)/* get filesystem (mm/filemap.c) read-ahead */
-#define BLKSECTSET _IO(0x12,102)/* set max sectors per request (ll_rw_blk.c) */
-#define BLKSECTGET _IO(0x12,103)/* get max sectors per request (ll_rw_blk.c) */
-#define BLKSSZGET  _IO(0x12,104)/* get block device sector size */
-#if 0
-#define BLKPG      _IO(0x12,105)/* See blkpg.h */
-
-/* Some people are morons.  Do not use sizeof! */
-
-#define BLKELVGET  _IOR(0x12,106,size_t)/* elevator get */
-#define BLKELVSET  _IOW(0x12,107,size_t)/* elevator set */
-/* This was here just to show that the number is taken -
-   probably all these _IO(0x12,*) ioctls should be moved to blkpg.h. */
-#endif
-/* A jump here: 108-111 have been used for various private purposes. */
-#define BLKBSZGET  _IOR(0x12,112,size_t)
-#define BLKBSZSET  _IOW(0x12,113,size_t)
-#define BLKGETSIZE64 _IOR(0x12,114,size_t)	/* return device size in bytes (u64 *arg) */
-#define BLKTRACESETUP _IOWR(0x12,115,struct blk_user_trace_setup)
-#define BLKTRACESTART _IO(0x12,116)
-#define BLKTRACESTOP _IO(0x12,117)
-#define BLKTRACETEARDOWN _IO(0x12,118)
-#define BLKDISCARD _IO(0x12,119)
-#define BLKIOMIN _IO(0x12,120)
-#define BLKIOOPT _IO(0x12,121)
-#define BLKALIGNOFF _IO(0x12,122)
-#define BLKPBSZGET _IO(0x12,123)
-#define BLKDISCARDZEROES _IO(0x12,124)
-#define BLKSECDISCARD _IO(0x12,125)
-#define BLKROTATIONAL _IO(0x12,126)
-
-#define BMAP_IOCTL 1		/* obsolete - kept for compatibility */
-#define FIBMAP	   _IO(0x00,1)	/* bmap access */
-#define FIGETBSZ   _IO(0x00,2)	/* get the block size used for bmap */
-#define FIFREEZE	_IOWR('X', 119, int)	/* Freeze */
-#define FITHAW		_IOWR('X', 120, int)	/* Thaw */
-#define FITRIM		_IOWR('X', 121, struct fstrim_range)	/* Trim */
-
-#define	FS_IOC_GETFLAGS			_IOR('f', 1, long)
-#define	FS_IOC_SETFLAGS			_IOW('f', 2, long)
-#define	FS_IOC_GETVERSION		_IOR('v', 1, long)
-#define	FS_IOC_SETVERSION		_IOW('v', 2, long)
-#define FS_IOC_FIEMAP			_IOWR('f', 11, struct fiemap)
-#define FS_IOC32_GETFLAGS		_IOR('f', 1, int)
-#define FS_IOC32_SETFLAGS		_IOW('f', 2, int)
-#define FS_IOC32_GETVERSION		_IOR('v', 1, int)
-#define FS_IOC32_SETVERSION		_IOW('v', 2, int)
-
-/*
- * Inode flags (FS_IOC_GETFLAGS / FS_IOC_SETFLAGS)
- */
-#define	FS_SECRM_FL			0x00000001 /* Secure deletion */
-#define	FS_UNRM_FL			0x00000002 /* Undelete */
-#define	FS_COMPR_FL			0x00000004 /* Compress file */
-#define FS_SYNC_FL			0x00000008 /* Synchronous updates */
-#define FS_IMMUTABLE_FL			0x00000010 /* Immutable file */
-#define FS_APPEND_FL			0x00000020 /* writes to file may only append */
-#define FS_NODUMP_FL			0x00000040 /* do not dump file */
-#define FS_NOATIME_FL			0x00000080 /* do not update atime */
-/* Reserved for compression usage... */
-#define FS_DIRTY_FL			0x00000100
-#define FS_COMPRBLK_FL			0x00000200 /* One or more compressed clusters */
-#define FS_NOCOMP_FL			0x00000400 /* Don't compress */
-#define FS_ECOMPR_FL			0x00000800 /* Compression error */
-/* End compression flags --- maybe not all used */
-#define FS_BTREE_FL			0x00001000 /* btree format dir */
-#define FS_INDEX_FL			0x00001000 /* hash-indexed directory */
-#define FS_IMAGIC_FL			0x00002000 /* AFS directory */
-#define FS_JOURNAL_DATA_FL		0x00004000 /* Reserved for ext3 */
-#define FS_NOTAIL_FL			0x00008000 /* file tail should not be merged */
-#define FS_DIRSYNC_FL			0x00010000 /* dirsync behaviour (directories only) */
-#define FS_TOPDIR_FL			0x00020000 /* Top of directory hierarchies*/
-#define FS_EXTENT_FL			0x00080000 /* Extents */
-#define FS_DIRECTIO_FL			0x00100000 /* Use direct i/o */
-#define FS_NOCOW_FL			0x00800000 /* Do not cow file */
-#define FS_RESERVED_FL			0x80000000 /* reserved for ext2 lib */
-
-#define FS_FL_USER_VISIBLE		0x0003DFFF /* User visible flags */
-#define FS_FL_USER_MODIFIABLE		0x000380FF /* User modifiable flags */
-
-
-#define SYNC_FILE_RANGE_WAIT_BEFORE	1
-#define SYNC_FILE_RANGE_WRITE		2
-#define SYNC_FILE_RANGE_WAIT_AFTER	4
-
-#ifdef __KERNEL__
-
-#include <linux/linkage.h>
-#include <linux/wait.h>
-#include <linux/kdev_t.h>
-#include <linux/dcache.h>
-#include <linux/path.h>
-#include <linux/stat.h>
-#include <linux/cache.h>
-#include <linux/list.h>
-#include <linux/radix-tree.h>
-#include <linux/prio_tree.h>
-#include <linux/init.h>
-#include <linux/pid.h>
-#include <linux/bug.h>
-#include <linux/mutex.h>
-#include <linux/capability.h>
-#include <linux/semaphore.h>
-#include <linux/fiemap.h>
-#include <linux/rculist_bl.h>
-#include <linux/atomic.h>
-#include <linux/shrinker.h>
-#include <linux/migrate_mode.h>
-
-#include <asm/byteorder.h>
-
-struct export_operations;
-struct hd_geometry;
-struct iovec;
-struct nameidata;
-struct kiocb;
-struct kobject;
-struct pipe_inode_info;
-struct poll_table_struct;
-struct kstatfs;
-struct vm_area_struct;
-struct vfsmount;
-struct cred;
-
-extern void __init inode_init(void);
-extern void __init inode_init_early(void);
-extern void __init files_init(unsigned long);
-
-extern struct files_stat_struct files_stat;
-extern unsigned long get_max_files(void);
-extern int sysctl_nr_open;
-extern struct inodes_stat_t inodes_stat;
-extern int leases_enable, lease_break_time;
-
-struct buffer_head;
-typedef int (get_block_t)(struct inode *inode, sector_t iblock,
-			struct buffer_head *bh_result, int create);
-typedef void (dio_iodone_t)(struct kiocb *iocb, loff_t offset,
-			ssize_t bytes, void *private, int ret,
-			bool is_async);
-
-/*
- * Attribute flags.  These should be or-ed together to figure out what
- * has been changed!
- */
-#define ATTR_MODE	(1 << 0)
-#define ATTR_UID	(1 << 1)
-#define ATTR_GID	(1 << 2)
-#define ATTR_SIZE	(1 << 3)
-#define ATTR_ATIME	(1 << 4)
-#define ATTR_MTIME	(1 << 5)
-#define ATTR_CTIME	(1 << 6)
-#define ATTR_ATIME_SET	(1 << 7)
-#define ATTR_MTIME_SET	(1 << 8)
-#define ATTR_FORCE	(1 << 9) /* Not a change, but a change it */
-#define ATTR_ATTR_FLAG	(1 << 10)
-#define ATTR_KILL_SUID	(1 << 11)
-#define ATTR_KILL_SGID	(1 << 12)
-#define ATTR_FILE	(1 << 13)
-#define ATTR_KILL_PRIV	(1 << 14)
-#define ATTR_OPEN	(1 << 15) /* Truncating from open(O_TRUNC) */
-#define ATTR_TIMES_SET	(1 << 16)
-
-/*
- * This is the Inode Attributes structure, used for notify_change().  It
- * uses the above definitions as flags, to know which values have changed.
- * Also, in this manner, a Filesystem can look at only the values it cares
- * about.  Basically, these are the attributes that the VFS layer can
- * request to change from the FS layer.
- *
- * Derek Atkins <warlord@MIT.EDU> 94-10-20
- */
-struct iattr {
-	unsigned int	ia_valid;
-	umode_t		ia_mode;
-	uid_t		ia_uid;
-	gid_t		ia_gid;
-	loff_t		ia_size;
-	struct timespec	ia_atime;
-	struct timespec	ia_mtime;
-	struct timespec	ia_ctime;
-
-	/*
-	 * Not an attribute, but an auxiliary info for filesystems wanting to
-	 * implement an ftruncate() like method.  NOTE: filesystem should
-	 * check for (ia_valid & ATTR_FILE), and not for (ia_file != NULL).
-	 */
-	struct file	*ia_file;
-};
-
-/*
- * Includes for diskquotas.
- */
-#include <linux/quota.h>
-
-/** 
- * enum positive_aop_returns - aop return codes with specific semantics
- *
- * @AOP_WRITEPAGE_ACTIVATE: Informs the caller that page writeback has
- * 			    completed, that the page is still locked, and
- * 			    should be considered active.  The VM uses this hint
- * 			    to return the page to the active list -- it won't
- * 			    be a candidate for writeback again in the near
- * 			    future.  Other callers must be careful to unlock
- * 			    the page if they get this return.  Returned by
- * 			    writepage(); 
- *
- * @AOP_TRUNCATED_PAGE: The AOP method that was handed a locked page has
- *  			unlocked it and the page might have been truncated.
- *  			The caller should back up to acquiring a new page and
- *  			trying again.  The aop will be taking reasonable
- *  			precautions not to livelock.  If the caller held a page
- *  			reference, it should drop it before retrying.  Returned
- *  			by readpage().
- *
- * address_space_operation functions return these large constants to indicate
- * special semantics to the caller.  These are much larger than the bytes in a
- * page to allow for functions that return the number of bytes operated on in a
- * given page.
- */
-
-enum positive_aop_returns {
-	AOP_WRITEPAGE_ACTIVATE	= 0x80000,
-	AOP_TRUNCATED_PAGE	= 0x80001,
-};
-
-#define AOP_FLAG_UNINTERRUPTIBLE	0x0001 /* will not do a short write */
-#define AOP_FLAG_CONT_EXPAND		0x0002 /* called from cont_expand */
-#define AOP_FLAG_NOFS			0x0004 /* used by filesystem to direct
-						* helper code (eg buffer layer)
-						* to clear GFP_FS from alloc */
-
-/*
- * oh the beauties of C type declarations.
- */
-struct page;
-struct address_space;
-struct writeback_control;
-
-struct iov_iter {
-	const struct iovec *iov;
-	unsigned long nr_segs;
-	size_t iov_offset;
-	size_t count;
-};
-
-size_t iov_iter_copy_from_user_atomic(struct page *page,
-		struct iov_iter *i, unsigned long offset, size_t bytes);
-size_t iov_iter_copy_from_user(struct page *page,
-		struct iov_iter *i, unsigned long offset, size_t bytes);
-void iov_iter_advance(struct iov_iter *i, size_t bytes);
-int iov_iter_fault_in_readable(struct iov_iter *i, size_t bytes);
-size_t iov_iter_single_seg_count(struct iov_iter *i);
-
-static inline void iov_iter_init(struct iov_iter *i,
-			const struct iovec *iov, unsigned long nr_segs,
-			size_t count, size_t written)
-{
-	i->iov = iov;
-	i->nr_segs = nr_segs;
-	i->iov_offset = 0;
-	i->count = count + written;
-
-	iov_iter_advance(i, written);
-}
-
-static inline size_t iov_iter_count(struct iov_iter *i)
-{
-	return i->count;
-}
-
-/*
- * "descriptor" for what we're up to with a read.
- * This allows us to use the same read code yet
- * have multiple different users of the data that
- * we read from a file.
- *
- * The simplest case just copies the data to user
- * mode.
- */
-typedef struct {
-	size_t written;
-	size_t count;
-	union {
-		char __user *buf;
-		void *data;
-	} arg;
-	int error;
-} read_descriptor_t;
-
-typedef int (*read_actor_t)(read_descriptor_t *, struct page *,
-		unsigned long, unsigned long);
-
-struct address_space_operations {
-	int (*writepage)(struct page *page, struct writeback_control *wbc);
-	int (*readpage)(struct file *, struct page *);
-
-	/* Write back some dirty pages from this mapping. */
-	int (*writepages)(struct address_space *, struct writeback_control *);
-
-	/* Set a page dirty.  Return true if this dirtied it */
-	int (*set_page_dirty)(struct page *page);
-
-	int (*readpages)(struct file *filp, struct address_space *mapping,
-			struct list_head *pages, unsigned nr_pages);
-
-	int (*write_begin)(struct file *, struct address_space *mapping,
-				loff_t pos, unsigned len, unsigned flags,
-				struct page **pagep, void **fsdata);
-	int (*write_end)(struct file *, struct address_space *mapping,
-				loff_t pos, unsigned len, unsigned copied,
-				struct page *page, void *fsdata);
-
-	/* Unfortunately this kludge is needed for FIBMAP. Don't use it */
-	sector_t (*bmap)(struct address_space *, sector_t);
-	void (*invalidatepage) (struct page *, unsigned long);
-	int (*releasepage) (struct page *, gfp_t);
-	void (*freepage)(struct page *);
-	ssize_t (*direct_IO)(int, struct kiocb *, const struct iovec *iov,
-			loff_t offset, unsigned long nr_segs);
-	int (*get_xip_mem)(struct address_space *, pgoff_t, int,
-						void **, unsigned long *);
-	/*
-	 * migrate the contents of a page to the specified target. If sync
-	 * is false, it must not block.
-	 */
-	int (*migratepage) (struct address_space *,
-			struct page *, struct page *, enum migrate_mode);
-	int (*launder_page) (struct page *);
-	int (*is_partially_uptodate) (struct page *, read_descriptor_t *,
-					unsigned long);
-	int (*error_remove_page)(struct address_space *, struct page *);
-};
-
-extern const struct address_space_operations empty_aops;
-
-/*
- * pagecache_write_begin/pagecache_write_end must be used by general code
- * to write into the pagecache.
- */
-int pagecache_write_begin(struct file *, struct address_space *mapping,
-				loff_t pos, unsigned len, unsigned flags,
-				struct page **pagep, void **fsdata);
-
-int pagecache_write_end(struct file *, struct address_space *mapping,
-				loff_t pos, unsigned len, unsigned copied,
-				struct page *page, void *fsdata);
-
-struct backing_dev_info;
-struct address_space {
-	struct inode		*host;		/* owner: inode, block_device */
-	struct radix_tree_root	page_tree;	/* radix tree of all pages */
-	spinlock_t		tree_lock;	/* and lock protecting it */
-	unsigned int		i_mmap_writable;/* count VM_SHARED mappings */
-	struct prio_tree_root	i_mmap;		/* tree of private and shared mappings */
-	struct list_head	i_mmap_nonlinear;/*list VM_NONLINEAR mappings */
-	struct mutex		i_mmap_mutex;	/* protect tree, count, list */
-	/* Protected by tree_lock together with the radix tree */
-	unsigned long		nrpages;	/* number of total pages */
-	pgoff_t			writeback_index;/* writeback starts here */
-	const struct address_space_operations *a_ops;	/* methods */
-	unsigned long		flags;		/* error bits/gfp mask */
-	struct backing_dev_info *backing_dev_info; /* device readahead, etc */
-	spinlock_t		private_lock;	/* for use by the address_space */
-	struct list_head	private_list;	/* ditto */
-	struct address_space	*assoc_mapping;	/* ditto */
-} __attribute__((aligned(sizeof(long))));
-	/*
-	 * On most architectures that alignment is already the case; but
-	 * must be enforced here for CRIS, to let the least significant bit
-	 * of struct page's "mapping" pointer be used for PAGE_MAPPING_ANON.
-	 */
-struct request_queue;
-
-struct block_device {
-	dev_t			bd_dev;  /* not a kdev_t - it's a search key */
-	int			bd_openers;
-	struct inode *		bd_inode;	/* will die */
-	struct super_block *	bd_super;
-	struct mutex		bd_mutex;	/* open/close mutex */
-	struct list_head	bd_inodes;
-	void *			bd_claiming;
-	void *			bd_holder;
-	int			bd_holders;
-	bool			bd_write_holder;
-#ifdef CONFIG_SYSFS
-	struct list_head	bd_holder_disks;
-#endif
-	struct block_device *	bd_contains;
-	unsigned		bd_block_size;
-	struct hd_struct *	bd_part;
-	/* number of times partitions within this device have been opened. */
-	unsigned		bd_part_count;
-	int			bd_invalidated;
-	struct gendisk *	bd_disk;
-	struct request_queue *  bd_queue;
-	struct list_head	bd_list;
-	/*
-	 * Private data.  You must have bd_claim'ed the block_device
-	 * to use this.  NOTE:  bd_claim allows an owner to claim
-	 * the same device multiple times, the owner must take special
-	 * care to not mess up bd_private for that case.
-	 */
-	unsigned long		bd_private;
-
-	/* The counter of freeze processes */
-	int			bd_fsfreeze_count;
-	/* Mutex for freeze */
-	struct mutex		bd_fsfreeze_mutex;
-};
-
-/*
- * Radix-tree tags, for tagging dirty and writeback pages within the pagecache
- * radix trees
- */
-#define PAGECACHE_TAG_DIRTY	0
-#define PAGECACHE_TAG_WRITEBACK	1
-#define PAGECACHE_TAG_TOWRITE	2
-
-int mapping_tagged(struct address_space *mapping, int tag);
-
-/*
- * Might pages of this file be mapped into userspace?
- */
-static inline int mapping_mapped(struct address_space *mapping)
-{
-	return	!prio_tree_empty(&mapping->i_mmap) ||
-		!list_empty(&mapping->i_mmap_nonlinear);
-}
-
-/*
- * Might pages of this file have been modified in userspace?
- * Note that i_mmap_writable counts all VM_SHARED vmas: do_mmap_pgoff
- * marks vma as VM_SHARED if it is shared, and the file was opened for
- * writing i.e. vma may be mprotected writable even if now readonly.
- */
-static inline int mapping_writably_mapped(struct address_space *mapping)
-{
-	return mapping->i_mmap_writable != 0;
-}
-
-/*
- * Use sequence counter to get consistent i_size on 32-bit processors.
- */
-#if BITS_PER_LONG==32 && defined(CONFIG_SMP)
-#include <linux/seqlock.h>
-#define __NEED_I_SIZE_ORDERED
-#define i_size_ordered_init(inode) seqcount_init(&inode->i_size_seqcount)
-#else
-#define i_size_ordered_init(inode) do { } while (0)
-#endif
-
-struct posix_acl;
-#define ACL_NOT_CACHED ((void *)(-1))
-
-#define IOP_FASTPERM	0x0001
-#define IOP_LOOKUP	0x0002
-#define IOP_NOFOLLOW	0x0004
-
-/*
- * Keep mostly read-only and often accessed (especially for
- * the RCU path lookup and 'stat' data) fields at the beginning
- * of the 'struct inode'
- */
-struct inode {
-	umode_t			i_mode;
-	unsigned short		i_opflags;
-	uid_t			i_uid;
-	gid_t			i_gid;
-	unsigned int		i_flags;
-
-#ifdef CONFIG_FS_POSIX_ACL
-	struct posix_acl	*i_acl;
-	struct posix_acl	*i_default_acl;
-#endif
-
-	const struct inode_operations	*i_op;
-	struct super_block	*i_sb;
-	struct address_space	*i_mapping;
-
-#ifdef CONFIG_SECURITY
-	void			*i_security;
-#endif
-
-	/* Stat data, not accessed from path walking */
-	unsigned long		i_ino;
-	/*
-	 * Filesystems may only read i_nlink directly.  They shall use the
-	 * following functions for modification:
-	 *
-	 *    (set|clear|inc|drop)_nlink
-	 *    inode_(inc|dec)_link_count
-	 */
-	union {
-		const unsigned int i_nlink;
-		unsigned int __i_nlink;
-	};
-	dev_t			i_rdev;
-	struct timespec		i_atime;
-	struct timespec		i_mtime;
-	struct timespec		i_ctime;
-	spinlock_t		i_lock;	/* i_blocks, i_bytes, maybe i_size */
-	unsigned short          i_bytes;
-	blkcnt_t		i_blocks;
-	loff_t			i_size;
-
-#ifdef __NEED_I_SIZE_ORDERED
-	seqcount_t		i_size_seqcount;
-#endif
-
-	/* Misc */
-	unsigned long		i_state;
-	struct mutex		i_mutex;
-
-	unsigned long		dirtied_when;	/* jiffies of first dirtying */
-
-	struct hlist_node	i_hash;
-	struct list_head	i_wb_list;	/* backing dev IO list */
-	struct list_head	i_lru;		/* inode LRU list */
-	struct list_head	i_sb_list;
-	union {
-		struct list_head	i_dentry;
-		struct rcu_head		i_rcu;
-	};
-	atomic_t		i_count;
-	unsigned int		i_blkbits;
-	u64			i_version;
-	atomic_t		i_dio_count;
-	atomic_t		i_writecount;
-	const struct file_operations	*i_fop;	/* former ->i_op->default_file_ops */
-	struct file_lock	*i_flock;
-	struct address_space	i_data;
-#ifdef CONFIG_QUOTA
-	struct dquot		*i_dquot[MAXQUOTAS];
-#endif
-	struct list_head	i_devices;
-	union {
-		struct pipe_inode_info	*i_pipe;
-		struct block_device	*i_bdev;
-		struct cdev		*i_cdev;
-	};
-
-	__u32			i_generation;
-
-#ifdef CONFIG_FSNOTIFY
-	__u32			i_fsnotify_mask; /* all events this inode cares about */
-	struct hlist_head	i_fsnotify_marks;
-#endif
-
-#ifdef CONFIG_IMA
-	atomic_t		i_readcount; /* struct files open RO */
-#endif
-	void			*i_private; /* fs or device private pointer */
-};
-
-static inline int inode_unhashed(struct inode *inode)
-{
-	return hlist_unhashed(&inode->i_hash);
-}
-
-/*
- * inode->i_mutex nesting subclasses for the lock validator:
- *
- * 0: the object of the current VFS operation
- * 1: parent
- * 2: child/target
- * 3: quota file
- *
- * The locking order between these classes is
- * parent -> child -> normal -> xattr -> quota
- */
-enum inode_i_mutex_lock_class
-{
-	I_MUTEX_NORMAL,
-	I_MUTEX_PARENT,
-	I_MUTEX_CHILD,
-	I_MUTEX_XATTR,
-	I_MUTEX_QUOTA
-};
-
-/*
- * NOTE: in a 32bit arch with a preemptable kernel and
- * an UP compile the i_size_read/write must be atomic
- * with respect to the local cpu (unlike with preempt disabled),
- * but they don't need to be atomic with respect to other cpus like in
- * true SMP (so they need either to either locally disable irq around
- * the read or for example on x86 they can be still implemented as a
- * cmpxchg8b without the need of the lock prefix). For SMP compiles
- * and 64bit archs it makes no difference if preempt is enabled or not.
- */
-static inline loff_t i_size_read(const struct inode *inode)
-{
-#if BITS_PER_LONG==32 && defined(CONFIG_SMP)
-	loff_t i_size;
-	unsigned int seq;
-
-	do {
-		seq = read_seqcount_begin(&inode->i_size_seqcount);
-		i_size = inode->i_size;
-	} while (read_seqcount_retry(&inode->i_size_seqcount, seq));
-	return i_size;
-#elif BITS_PER_LONG==32 && defined(CONFIG_PREEMPT)
-	loff_t i_size;
-
-	preempt_disable();
-	i_size = inode->i_size;
-	preempt_enable();
-	return i_size;
-#else
-	return inode->i_size;
-#endif
-}
-
-/*
- * NOTE: unlike i_size_read(), i_size_write() does need locking around it
- * (normally i_mutex), otherwise on 32bit/SMP an update of i_size_seqcount
- * can be lost, resulting in subsequent i_size_read() calls spinning forever.
- */
-static inline void i_size_write(struct inode *inode, loff_t i_size)
-{
-#if BITS_PER_LONG==32 && defined(CONFIG_SMP)
-	write_seqcount_begin(&inode->i_size_seqcount);
-	inode->i_size = i_size;
-	write_seqcount_end(&inode->i_size_seqcount);
-#elif BITS_PER_LONG==32 && defined(CONFIG_PREEMPT)
-	preempt_disable();
-	inode->i_size = i_size;
-	preempt_enable();
-#else
-	inode->i_size = i_size;
-#endif
-}
-
-static inline unsigned iminor(const struct inode *inode)
-{
-	return MINOR(inode->i_rdev);
-}
-
-static inline unsigned imajor(const struct inode *inode)
-{
-	return MAJOR(inode->i_rdev);
-}
-
-extern struct block_device *I_BDEV(struct inode *inode);
-
-struct fown_struct {
-	rwlock_t lock;          /* protects pid, uid, euid fields */
-	struct pid *pid;	/* pid or -pgrp where SIGIO should be sent */
-	enum pid_type pid_type;	/* Kind of process group SIGIO should be sent to */
-	uid_t uid, euid;	/* uid/euid of process setting the owner */
-	int signum;		/* posix.1b rt signal to be delivered on IO */
-};
-
-/*
- * Track a single file's readahead state
- */
-struct file_ra_state {
-	pgoff_t start;			/* where readahead started */
-	unsigned int size;		/* # of readahead pages */
-	unsigned int async_size;	/* do asynchronous readahead when
-					   there are only # of pages ahead */
-
-	unsigned int ra_pages;		/* Maximum readahead window */
-	unsigned int mmap_miss;		/* Cache miss stat for mmap accesses */
-	loff_t prev_pos;		/* Cache last read() position */
-};
-
-/*
- * Check if @index falls in the readahead windows.
- */
-static inline int ra_has_index(struct file_ra_state *ra, pgoff_t index)
-{
-	return (index >= ra->start &&
-		index <  ra->start + ra->size);
-}
-
-#define FILE_MNT_WRITE_TAKEN	1
-#define FILE_MNT_WRITE_RELEASED	2
-
-struct file {
-	/*
-	 * fu_list becomes invalid after file_free is called and queued via
-	 * fu_rcuhead for RCU freeing
-	 */
-	union {
-		struct list_head	fu_list;
-		struct rcu_head 	fu_rcuhead;
-	} f_u;
-	struct path		f_path;
-#define f_dentry	f_path.dentry
-#define f_vfsmnt	f_path.mnt
-	const struct file_operations	*f_op;
-
-	/*
-	 * Protects f_ep_links, f_flags, f_pos vs i_size in lseek SEEK_CUR.
-	 * Must not be taken from IRQ context.
-	 */
-	spinlock_t		f_lock;
-#ifdef CONFIG_SMP
-	int			f_sb_list_cpu;
-#endif
-	atomic_long_t		f_count;
-	unsigned int 		f_flags;
-	fmode_t			f_mode;
-	loff_t			f_pos;
-	struct fown_struct	f_owner;
-	const struct cred	*f_cred;
-	struct file_ra_state	f_ra;
-
-	u64			f_version;
-#ifdef CONFIG_SECURITY
-	void			*f_security;
-#endif
-	/* needed for tty driver, and maybe others */
-	void			*private_data;
-
-#ifdef CONFIG_EPOLL
-	/* Used by fs/eventpoll.c to link all the hooks to this file */
-	struct list_head	f_ep_links;
-	struct list_head	f_tfile_llink;
-#endif /* #ifdef CONFIG_EPOLL */
-	struct address_space	*f_mapping;
-#ifdef CONFIG_DEBUG_WRITECOUNT
-	unsigned long f_mnt_write_state;
-#endif
-};
-
-struct file_handle {
-	__u32 handle_bytes;
-	int handle_type;
-	/* file identifier */
-	unsigned char f_handle[0];
-};
-
-#define get_file(x)	atomic_long_inc(&(x)->f_count)
-#define fput_atomic(x)	atomic_long_add_unless(&(x)->f_count, -1, 1)
-#define file_count(x)	atomic_long_read(&(x)->f_count)
-
-#ifdef CONFIG_DEBUG_WRITECOUNT
-static inline void file_take_write(struct file *f)
-{
-	WARN_ON(f->f_mnt_write_state != 0);
-	f->f_mnt_write_state = FILE_MNT_WRITE_TAKEN;
-}
-static inline void file_release_write(struct file *f)
-{
-	f->f_mnt_write_state |= FILE_MNT_WRITE_RELEASED;
-}
-static inline void file_reset_write(struct file *f)
-{
-	f->f_mnt_write_state = 0;
-}
-static inline void file_check_state(struct file *f)
-{
-	/*
-	 * At this point, either both or neither of these bits
-	 * should be set.
-	 */
-	WARN_ON(f->f_mnt_write_state == FILE_MNT_WRITE_TAKEN);
-	WARN_ON(f->f_mnt_write_state == FILE_MNT_WRITE_RELEASED);
-}
-static inline int file_check_writeable(struct file *f)
-{
-	if (f->f_mnt_write_state == FILE_MNT_WRITE_TAKEN)
-		return 0;
-	printk(KERN_WARNING "writeable file with no "
-			    "mnt_want_write()\n");
-	WARN_ON(1);
-	return -EINVAL;
-}
-#else /* !CONFIG_DEBUG_WRITECOUNT */
-static inline void file_take_write(struct file *filp) {}
-static inline void file_release_write(struct file *filp) {}
-static inline void file_reset_write(struct file *filp) {}
-static inline void file_check_state(struct file *filp) {}
-static inline int file_check_writeable(struct file *filp)
-{
-	return 0;
-}
-#endif /* CONFIG_DEBUG_WRITECOUNT */
-
-#define	MAX_NON_LFS	((1UL<<31) - 1)
-
-/* Page cache limit. The filesystems should put that into their s_maxbytes 
-   limits, otherwise bad things can happen in VM. */ 
-#if BITS_PER_LONG==32
-#define MAX_LFS_FILESIZE	(((u64)PAGE_CACHE_SIZE << (BITS_PER_LONG-1))-1) 
-#elif BITS_PER_LONG==64
-#define MAX_LFS_FILESIZE 	0x7fffffffffffffffUL
-#endif
-
-#define FL_POSIX	1
-#define FL_FLOCK	2
-#define FL_ACCESS	8	/* not trying to lock, just looking */
-#define FL_EXISTS	16	/* when unlocking, test for existence */
-#define FL_LEASE	32	/* lease held on this file */
-#define FL_CLOSE	64	/* unlock on close */
-#define FL_SLEEP	128	/* A blocking lock */
-#define FL_DOWNGRADE_PENDING	256 /* Lease is being downgraded */
-#define FL_UNLOCK_PENDING	512 /* Lease is being broken */
-
-/*
- * Special return value from posix_lock_file() and vfs_lock_file() for
- * asynchronous locking.
- */
-#define FILE_LOCK_DEFERRED 1
-
-/*
- * The POSIX file lock owner is determined by
- * the "struct files_struct" in the thread group
- * (or NULL for no owner - BSD locks).
- *
- * Lockd stuffs a "host" pointer into this.
- */
-typedef struct files_struct *fl_owner_t;
-
-struct file_lock_operations {
-	void (*fl_copy_lock)(struct file_lock *, struct file_lock *);
-	void (*fl_release_private)(struct file_lock *);
-};
-
-struct lock_manager_operations {
-	int (*lm_compare_owner)(struct file_lock *, struct file_lock *);
-	void (*lm_notify)(struct file_lock *);	/* unblock callback */
-	int (*lm_grant)(struct file_lock *, struct file_lock *, int);
-	void (*lm_release_private)(struct file_lock *);
-	void (*lm_break)(struct file_lock *);
-	int (*lm_change)(struct file_lock **, int);
-};
-
-struct lock_manager {
-	struct list_head list;
-};
-
-void locks_start_grace(struct lock_manager *);
-void locks_end_grace(struct lock_manager *);
-int locks_in_grace(void);
-
-/* that will die - we need it for nfs_lock_info */
-#include <linux/nfs_fs_i.h>
-
-struct file_lock {
-	struct file_lock *fl_next;	/* singly linked list for this inode  */
-	struct list_head fl_link;	/* doubly linked list of all locks */
-	struct list_head fl_block;	/* circular list of blocked processes */
-	fl_owner_t fl_owner;
-	unsigned int fl_flags;
-	unsigned char fl_type;
-	unsigned int fl_pid;
-	struct pid *fl_nspid;
-	wait_queue_head_t fl_wait;
-	struct file *fl_file;
-	loff_t fl_start;
-	loff_t fl_end;
-
-	struct fasync_struct *	fl_fasync; /* for lease break notifications */
-	/* for lease breaks: */
-	unsigned long fl_break_time;
-	unsigned long fl_downgrade_time;
-
-	const struct file_lock_operations *fl_ops;	/* Callbacks for filesystems */
-	const struct lock_manager_operations *fl_lmops;	/* Callbacks for lockmanagers */
-	union {
-		struct nfs_lock_info	nfs_fl;
-		struct nfs4_lock_info	nfs4_fl;
-		struct {
-			struct list_head link;	/* link in AFS vnode's pending_locks list */
-			int state;		/* state of grant or error if -ve */
-		} afs;
-	} fl_u;
-};
-
-/* The following constant reflects the upper bound of the file/locking space */
-#ifndef OFFSET_MAX
-#define INT_LIMIT(x)	(~((x)1 << (sizeof(x)*8 - 1)))
-#define OFFSET_MAX	INT_LIMIT(loff_t)
-#define OFFT_OFFSET_MAX	INT_LIMIT(off_t)
-#endif
-
-#include <linux/fcntl.h>
-
-extern void send_sigio(struct fown_struct *fown, int fd, int band);
-
-#ifdef CONFIG_FILE_LOCKING
-extern int fcntl_getlk(struct file *, struct flock __user *);
-extern int fcntl_setlk(unsigned int, struct file *, unsigned int,
-			struct flock __user *);
-
-#if BITS_PER_LONG == 32
-extern int fcntl_getlk64(struct file *, struct flock64 __user *);
-extern int fcntl_setlk64(unsigned int, struct file *, unsigned int,
-			struct flock64 __user *);
-#endif
-
-extern int fcntl_setlease(unsigned int fd, struct file *filp, long arg);
-extern int fcntl_getlease(struct file *filp);
-
-/* fs/locks.c */
-void locks_free_lock(struct file_lock *fl);
-extern void locks_init_lock(struct file_lock *);
-extern struct file_lock * locks_alloc_lock(void);
-extern void locks_copy_lock(struct file_lock *, struct file_lock *);
-extern void __locks_copy_lock(struct file_lock *, const struct file_lock *);
-extern void locks_remove_posix(struct file *, fl_owner_t);
-extern void locks_remove_flock(struct file *);
-extern void locks_release_private(struct file_lock *);
-extern void posix_test_lock(struct file *, struct file_lock *);
-extern int posix_lock_file(struct file *, struct file_lock *, struct file_lock *);
-extern int posix_lock_file_wait(struct file *, struct file_lock *);
-extern int posix_unblock_lock(struct file *, struct file_lock *);
-extern int vfs_test_lock(struct file *, struct file_lock *);
-extern int vfs_lock_file(struct file *, unsigned int, struct file_lock *, struct file_lock *);
-extern int vfs_cancel_lock(struct file *filp, struct file_lock *fl);
-extern int flock_lock_file_wait(struct file *filp, struct file_lock *fl);
-extern int __break_lease(struct inode *inode, unsigned int flags);
-extern void lease_get_mtime(struct inode *, struct timespec *time);
-extern int generic_setlease(struct file *, long, struct file_lock **);
-extern int vfs_setlease(struct file *, long, struct file_lock **);
-extern int lease_modify(struct file_lock **, int);
-extern int lock_may_read(struct inode *, loff_t start, unsigned long count);
-extern int lock_may_write(struct inode *, loff_t start, unsigned long count);
-extern void locks_delete_block(struct file_lock *waiter);
-extern void lock_flocks(void);
-extern void unlock_flocks(void);
-#else /* !CONFIG_FILE_LOCKING */
-static inline int fcntl_getlk(struct file *file, struct flock __user *user)
-{
-	return -EINVAL;
-}
-
-static inline int fcntl_setlk(unsigned int fd, struct file *file,
-			      unsigned int cmd, struct flock __user *user)
-{
-	return -EACCES;
-}
-
-#if BITS_PER_LONG == 32
-static inline int fcntl_getlk64(struct file *file, struct flock64 __user *user)
-{
-	return -EINVAL;
-}
-
-static inline int fcntl_setlk64(unsigned int fd, struct file *file,
-				unsigned int cmd, struct flock64 __user *user)
-{
-	return -EACCES;
-}
-#endif
-static inline int fcntl_setlease(unsigned int fd, struct file *filp, long arg)
-{
-	return 0;
-}
-
-static inline int fcntl_getlease(struct file *filp)
-{
-	return 0;
-}
-
-static inline void locks_init_lock(struct file_lock *fl)
-{
-	return;
-}
-
-static inline void __locks_copy_lock(struct file_lock *new, struct file_lock *fl)
-{
-	return;
-}
-
-static inline void locks_copy_lock(struct file_lock *new, struct file_lock *fl)
-{
-	return;
-}
-
-static inline void locks_remove_posix(struct file *filp, fl_owner_t owner)
-{
-	return;
-}
-
-static inline void locks_remove_flock(struct file *filp)
-{
-	return;
-}
-
-static inline void posix_test_lock(struct file *filp, struct file_lock *fl)
-{
-	return;
-}
-
-static inline int posix_lock_file(struct file *filp, struct file_lock *fl,
-				  struct file_lock *conflock)
-{
-	return -ENOLCK;
-}
-
-static inline int posix_lock_file_wait(struct file *filp, struct file_lock *fl)
-{
-	return -ENOLCK;
-}
-
-static inline int posix_unblock_lock(struct file *filp,
-				     struct file_lock *waiter)
-{
-	return -ENOENT;
-}
-
-static inline int vfs_test_lock(struct file *filp, struct file_lock *fl)
-{
-	return 0;
-}
-
-static inline int vfs_lock_file(struct file *filp, unsigned int cmd,
-				struct file_lock *fl, struct file_lock *conf)
-{
-	return -ENOLCK;
-}
-
-static inline int vfs_cancel_lock(struct file *filp, struct file_lock *fl)
-{
-	return 0;
-}
-
-static inline int flock_lock_file_wait(struct file *filp,
-				       struct file_lock *request)
-{
-	return -ENOLCK;
-}
-
-static inline int __break_lease(struct inode *inode, unsigned int mode)
-{
-	return 0;
-}
-
-static inline void lease_get_mtime(struct inode *inode, struct timespec *time)
-{
-	return;
-}
-
-static inline int generic_setlease(struct file *filp, long arg,
-				    struct file_lock **flp)
-{
-	return -EINVAL;
-}
-
-static inline int vfs_setlease(struct file *filp, long arg,
-			       struct file_lock **lease)
-{
-	return -EINVAL;
-}
-
-static inline int lease_modify(struct file_lock **before, int arg)
-{
-	return -EINVAL;
-}
-
-static inline int lock_may_read(struct inode *inode, loff_t start,
-				unsigned long len)
-{
-	return 1;
-}
-
-static inline int lock_may_write(struct inode *inode, loff_t start,
-				 unsigned long len)
-{
-	return 1;
-}
-
-static inline void locks_delete_block(struct file_lock *waiter)
-{
-}
-
-static inline void lock_flocks(void)
-{
-}
-
-static inline void unlock_flocks(void)
-{
-}
-
-#endif /* !CONFIG_FILE_LOCKING */
-
-
-struct fasync_struct {
-	spinlock_t		fa_lock;
-	int			magic;
-	int			fa_fd;
-	struct fasync_struct	*fa_next; /* singly linked list */
-	struct file		*fa_file;
-	struct rcu_head		fa_rcu;
-};
-
-#define FASYNC_MAGIC 0x4601
-
-/* SMP safe fasync helpers: */
-extern int fasync_helper(int, struct file *, int, struct fasync_struct **);
-extern struct fasync_struct *fasync_insert_entry(int, struct file *, struct fasync_struct **, struct fasync_struct *);
-extern int fasync_remove_entry(struct file *, struct fasync_struct **);
-extern struct fasync_struct *fasync_alloc(void);
-extern void fasync_free(struct fasync_struct *);
-
-/* can be called from interrupts */
-extern void kill_fasync(struct fasync_struct **, int, int);
-
-extern int __f_setown(struct file *filp, struct pid *, enum pid_type, int force);
-extern int f_setown(struct file *filp, unsigned long arg, int force);
-extern void f_delown(struct file *filp);
-extern pid_t f_getown(struct file *filp);
-extern int send_sigurg(struct fown_struct *fown);
-
-/*
- *	Umount options
- */
-
-#define MNT_FORCE	0x00000001	/* Attempt to forcibily umount */
-#define MNT_DETACH	0x00000002	/* Just detach from the tree */
-#define MNT_EXPIRE	0x00000004	/* Mark for expiry */
-#define UMOUNT_NOFOLLOW	0x00000008	/* Don't follow symlink on umount */
-#define UMOUNT_UNUSED	0x80000000	/* Flag guaranteed to be unused */
-
-extern struct list_head super_blocks;
-extern spinlock_t sb_lock;
-
-struct super_block {
-	struct list_head	s_list;		/* Keep this first */
-	dev_t			s_dev;		/* search index; _not_ kdev_t */
-	unsigned char		s_dirt;
-	unsigned char		s_blocksize_bits;
-	unsigned long		s_blocksize;
-	loff_t			s_maxbytes;	/* Max file size */
-	struct file_system_type	*s_type;
-	const struct super_operations	*s_op;
-	const struct dquot_operations	*dq_op;
-	const struct quotactl_ops	*s_qcop;
-	const struct export_operations *s_export_op;
-	unsigned long		s_flags;
-	unsigned long		s_magic;
-	struct dentry		*s_root;
-	struct rw_semaphore	s_umount;
-	struct mutex		s_lock;
-	int			s_count;
-	atomic_t		s_active;
-#ifdef CONFIG_SECURITY
-	void                    *s_security;
-#endif
-	const struct xattr_handler **s_xattr;
-
-	struct list_head	s_inodes;	/* all inodes */
-	struct hlist_bl_head	s_anon;		/* anonymous dentries for (nfs) exporting */
-#ifdef CONFIG_SMP
-	struct list_head __percpu *s_files;
-#else
-	struct list_head	s_files;
-#endif
-	struct list_head	s_mounts;	/* list of mounts; _not_ for fs use */
-	/* s_dentry_lru, s_nr_dentry_unused protected by dcache.c lru locks */
-	struct list_head	s_dentry_lru;	/* unused dentry lru */
-	int			s_nr_dentry_unused;	/* # of dentry on lru */
-
-	/* s_inode_lru_lock protects s_inode_lru and s_nr_inodes_unused */
-	spinlock_t		s_inode_lru_lock ____cacheline_aligned_in_smp;
-	struct list_head	s_inode_lru;		/* unused inode lru */
-	int			s_nr_inodes_unused;	/* # of inodes on lru */
-
-	struct block_device	*s_bdev;
-	struct backing_dev_info *s_bdi;
-	struct mtd_info		*s_mtd;
-	struct hlist_node	s_instances;
-	struct quota_info	s_dquot;	/* Diskquota specific options */
-
-	int			s_frozen;
-	wait_queue_head_t	s_wait_unfrozen;
-
-	char s_id[32];				/* Informational name */
-	u8 s_uuid[16];				/* UUID */
-
-	void 			*s_fs_info;	/* Filesystem private info */
-	unsigned int		s_max_links;
-	fmode_t			s_mode;
-
-	/* Granularity of c/m/atime in ns.
-	   Cannot be worse than a second */
-	u32		   s_time_gran;
-
-	/*
-	 * The next field is for VFS *only*. No filesystems have any business
-	 * even looking at it. You had been warned.
-	 */
-	struct mutex s_vfs_rename_mutex;	/* Kludge */
-
-	/*
-	 * Filesystem subtype.  If non-empty the filesystem type field
-	 * in /proc/mounts will be "type.subtype"
-	 */
-	char *s_subtype;
-
-	/*
-	 * Saved mount options for lazy filesystems using
-	 * generic_show_options()
-	 */
-	char __rcu *s_options;
-	const struct dentry_operations *s_d_op; /* default d_op for dentries */
-
-	/*
-	 * Saved pool identifier for cleancache (-1 means none)
-	 */
-	int cleancache_poolid;
-
-	struct shrinker s_shrink;	/* per-sb shrinker handle */
-
-	/* Number of inodes with nlink == 0 but still referenced */
-	atomic_long_t s_remove_count;
-
-	/* Being remounted read-only */
-	int s_readonly_remount;
-};
-
-/* superblock cache pruning functions */
-extern void prune_icache_sb(struct super_block *sb, int nr_to_scan);
-extern void prune_dcache_sb(struct super_block *sb, int nr_to_scan);
-
-extern struct timespec current_fs_time(struct super_block *sb);
-
-/*
- * Snapshotting support.
- */
-enum {
-	SB_UNFROZEN = 0,
-	SB_FREEZE_WRITE	= 1,
-	SB_FREEZE_TRANS = 2,
-};
-
-#define vfs_check_frozen(sb, level) \
-	wait_event((sb)->s_wait_unfrozen, ((sb)->s_frozen < (level)))
-
-/*
- * until VFS tracks user namespaces for inodes, just make all files
- * belong to init_user_ns
- */
-extern struct user_namespace init_user_ns;
-#define inode_userns(inode) (&init_user_ns)
-extern bool inode_owner_or_capable(const struct inode *inode);
-
-/* not quite ready to be deprecated, but... */
-extern void lock_super(struct super_block *);
-extern void unlock_super(struct super_block *);
-
-/*
- * VFS helper functions..
- */
-extern int vfs_create(struct inode *, struct dentry *, umode_t, struct nameidata *);
-extern int vfs_mkdir(struct inode *, struct dentry *, umode_t);
-extern int vfs_mknod(struct inode *, struct dentry *, umode_t, dev_t);
-extern int vfs_symlink(struct inode *, struct dentry *, const char *);
-extern int vfs_link(struct dentry *, struct inode *, struct dentry *);
-extern int vfs_rmdir(struct inode *, struct dentry *);
-extern int vfs_unlink(struct inode *, struct dentry *);
-extern int vfs_rename(struct inode *, struct dentry *, struct inode *, struct dentry *);
-
-/*
- * VFS dentry helper functions.
- */
-extern void dentry_unhash(struct dentry *dentry);
-
-/*
- * VFS file helper functions.
- */
-extern void inode_init_owner(struct inode *inode, const struct inode *dir,
-			umode_t mode);
-/*
- * VFS FS_IOC_FIEMAP helper definitions.
- */
-struct fiemap_extent_info {
-	unsigned int fi_flags;		/* Flags as passed from user */
-	unsigned int fi_extents_mapped;	/* Number of mapped extents */
-	unsigned int fi_extents_max;	/* Size of fiemap_extent array */
-	struct fiemap_extent __user *fi_extents_start; /* Start of
-							fiemap_extent array */
-};
-int fiemap_fill_next_extent(struct fiemap_extent_info *info, u64 logical,
-			    u64 phys, u64 len, u32 flags);
-int fiemap_check_flags(struct fiemap_extent_info *fieinfo, u32 fs_flags);
-
-/*
- * File types
- *
- * NOTE! These match bits 12..15 of stat.st_mode
- * (ie "(i_mode >> 12) & 15").
- */
-#define DT_UNKNOWN	0
-#define DT_FIFO		1
-#define DT_CHR		2
-#define DT_DIR		4
-#define DT_BLK		6
-#define DT_REG		8
-#define DT_LNK		10
-#define DT_SOCK		12
-#define DT_WHT		14
-
-/*
- * This is the "filldir" function type, used by readdir() to let
- * the kernel specify what kind of dirent layout it wants to have.
- * This allows the kernel to read directories into kernel space or
- * to have different dirent layouts depending on the binary type.
- */
-typedef int (*filldir_t)(void *, const char *, int, loff_t, u64, unsigned);
-struct block_device_operations;
-
-/* These macros are for out of kernel modules to test that
- * the kernel supports the unlocked_ioctl and compat_ioctl
- * fields in struct file_operations. */
-#define HAVE_COMPAT_IOCTL 1
-#define HAVE_UNLOCKED_IOCTL 1
-
-struct file_operations {
-	struct module *owner;
-	loff_t (*llseek) (struct file *, loff_t, int);
-	ssize_t (*read) (struct file *, char __user *, size_t, loff_t *);
-	ssize_t (*write) (struct file *, const char __user *, size_t, loff_t *);
-	ssize_t (*aio_read) (struct kiocb *, const struct iovec *, unsigned long, loff_t);
-	ssize_t (*aio_write) (struct kiocb *, const struct iovec *, unsigned long, loff_t);
-	int (*readdir) (struct file *, void *, filldir_t);
-	unsigned int (*poll) (struct file *, struct poll_table_struct *);
-	long (*unlocked_ioctl) (struct file *, unsigned int, unsigned long);
-	long (*compat_ioctl) (struct file *, unsigned int, unsigned long);
-	int (*mmap) (struct file *, struct vm_area_struct *);
-	int (*open) (struct inode *, struct file *);
-	int (*flush) (struct file *, fl_owner_t id);
-	int (*release) (struct inode *, struct file *);
-	int (*fsync) (struct file *, loff_t, loff_t, int datasync);
-	int (*aio_fsync) (struct kiocb *, int datasync);
-	int (*fasync) (int, struct file *, int);
-	int (*lock) (struct file *, int, struct file_lock *);
-	ssize_t (*sendpage) (struct file *, struct page *, int, size_t, loff_t *, int);
-	unsigned long (*get_unmapped_area)(struct file *, unsigned long, unsigned long, unsigned long, unsigned long);
-	int (*check_flags)(int);
-	int (*flock) (struct file *, int, struct file_lock *);
-	ssize_t (*splice_write)(struct pipe_inode_info *, struct file *, loff_t *, size_t, unsigned int);
-	ssize_t (*splice_read)(struct file *, loff_t *, struct pipe_inode_info *, size_t, unsigned int);
-	int (*setlease)(struct file *, long, struct file_lock **);
-	long (*fallocate)(struct file *file, int mode, loff_t offset,
-			  loff_t len);
-};
-
-struct inode_operations {
-	struct dentry * (*lookup) (struct inode *,struct dentry *, struct nameidata *);
-	void * (*follow_link) (struct dentry *, struct nameidata *);
-	int (*permission) (struct inode *, int);
-	struct posix_acl * (*get_acl)(struct inode *, int);
-
-	int (*readlink) (struct dentry *, char __user *,int);
-	void (*put_link) (struct dentry *, struct nameidata *, void *);
-
-	int (*create) (struct inode *,struct dentry *,umode_t,struct nameidata *);
-	int (*link) (struct dentry *,struct inode *,struct dentry *);
-	int (*unlink) (struct inode *,struct dentry *);
-	int (*symlink) (struct inode *,struct dentry *,const char *);
-	int (*mkdir) (struct inode *,struct dentry *,umode_t);
-	int (*rmdir) (struct inode *,struct dentry *);
-	int (*mknod) (struct inode *,struct dentry *,umode_t,dev_t);
-	int (*rename) (struct inode *, struct dentry *,
-			struct inode *, struct dentry *);
-	void (*truncate) (struct inode *);
-	int (*setattr) (struct dentry *, struct iattr *);
-	int (*getattr) (struct vfsmount *mnt, struct dentry *, struct kstat *);
-	int (*setxattr) (struct dentry *, const char *,const void *,size_t,int);
-	ssize_t (*getxattr) (struct dentry *, const char *, void *, size_t);
-	ssize_t (*listxattr) (struct dentry *, char *, size_t);
-	int (*removexattr) (struct dentry *, const char *);
-	void (*truncate_range)(struct inode *, loff_t, loff_t);
-	int (*fiemap)(struct inode *, struct fiemap_extent_info *, u64 start,
-		      u64 len);
-} ____cacheline_aligned;
-
-struct seq_file;
-
-ssize_t rw_copy_check_uvector(int type, const struct iovec __user * uvector,
-			      unsigned long nr_segs, unsigned long fast_segs,
-			      struct iovec *fast_pointer,
-			      struct iovec **ret_pointer,
-			      int check_access);
-
-extern ssize_t vfs_read(struct file *, char __user *, size_t, loff_t *);
-extern ssize_t vfs_write(struct file *, const char __user *, size_t, loff_t *);
-extern ssize_t vfs_readv(struct file *, const struct iovec __user *,
-		unsigned long, loff_t *);
-extern ssize_t vfs_writev(struct file *, const struct iovec __user *,
-		unsigned long, loff_t *);
-
-struct super_operations {
-   	struct inode *(*alloc_inode)(struct super_block *sb);
-	void (*destroy_inode)(struct inode *);
-
-   	void (*dirty_inode) (struct inode *, int flags);
-	int (*write_inode) (struct inode *, struct writeback_control *wbc);
-	int (*drop_inode) (struct inode *);
-	void (*evict_inode) (struct inode *);
-	void (*put_super) (struct super_block *);
-	void (*write_super) (struct super_block *);
-	int (*sync_fs)(struct super_block *sb, int wait);
-	int (*freeze_fs) (struct super_block *);
-	int (*unfreeze_fs) (struct super_block *);
-	int (*statfs) (struct dentry *, struct kstatfs *);
-	int (*remount_fs) (struct super_block *, int *, char *);
-	void (*umount_begin) (struct super_block *);
-
-	int (*show_options)(struct seq_file *, struct dentry *);
-	int (*show_devname)(struct seq_file *, struct dentry *);
-	int (*show_path)(struct seq_file *, struct dentry *);
-	int (*show_stats)(struct seq_file *, struct dentry *);
-#ifdef CONFIG_QUOTA
-	ssize_t (*quota_read)(struct super_block *, int, char *, size_t, loff_t);
-	ssize_t (*quota_write)(struct super_block *, int, const char *, size_t, loff_t);
-#endif
-	int (*bdev_try_to_free_page)(struct super_block*, struct page*, gfp_t);
-	int (*nr_cached_objects)(struct super_block *);
-	void (*free_cached_objects)(struct super_block *, int);
-};
-
-/*
- * Inode state bits.  Protected by inode->i_lock
- *
- * Three bits determine the dirty state of the inode, I_DIRTY_SYNC,
- * I_DIRTY_DATASYNC and I_DIRTY_PAGES.
- *
- * Four bits define the lifetime of an inode.  Initially, inodes are I_NEW,
- * until that flag is cleared.  I_WILL_FREE, I_FREEING and I_CLEAR are set at
- * various stages of removing an inode.
- *
- * Two bits are used for locking and completion notification, I_NEW and I_SYNC.
- *
- * I_DIRTY_SYNC		Inode is dirty, but doesn't have to be written on
- *			fdatasync().  i_atime is the usual cause.
- * I_DIRTY_DATASYNC	Data-related inode changes pending. We keep track of
- *			these changes separately from I_DIRTY_SYNC so that we
- *			don't have to write inode on fdatasync() when only
- *			mtime has changed in it.
- * I_DIRTY_PAGES	Inode has dirty pages.  Inode itself may be clean.
- * I_NEW		Serves as both a mutex and completion notification.
- *			New inodes set I_NEW.  If two processes both create
- *			the same inode, one of them will release its inode and
- *			wait for I_NEW to be released before returning.
- *			Inodes in I_WILL_FREE, I_FREEING or I_CLEAR state can
- *			also cause waiting on I_NEW, without I_NEW actually
- *			being set.  find_inode() uses this to prevent returning
- *			nearly-dead inodes.
- * I_WILL_FREE		Must be set when calling write_inode_now() if i_count
- *			is zero.  I_FREEING must be set when I_WILL_FREE is
- *			cleared.
- * I_FREEING		Set when inode is about to be freed but still has dirty
- *			pages or buffers attached or the inode itself is still
- *			dirty.
- * I_CLEAR		Added by end_writeback().  In this state the inode is clean
- *			and can be destroyed.  Inode keeps I_FREEING.
- *
- *			Inodes that are I_WILL_FREE, I_FREEING or I_CLEAR are
- *			prohibited for many purposes.  iget() must wait for
- *			the inode to be completely released, then create it
- *			anew.  Other functions will just ignore such inodes,
- *			if appropriate.  I_NEW is used for waiting.
- *
- * I_SYNC		Synchonized write of dirty inode data.  The bits is
- *			set during data writeback, and cleared with a wakeup
- *			on the bit address once it is done.
- *
- * I_REFERENCED		Marks the inode as recently references on the LRU list.
- *
- * I_DIO_WAKEUP		Never set.  Only used as a key for wait_on_bit().
- *
- * Q: What is the difference between I_WILL_FREE and I_FREEING?
- */
-#define I_DIRTY_SYNC		(1 << 0)
-#define I_DIRTY_DATASYNC	(1 << 1)
-#define I_DIRTY_PAGES		(1 << 2)
-#define __I_NEW			3
-#define I_NEW			(1 << __I_NEW)
-#define I_WILL_FREE		(1 << 4)
-#define I_FREEING		(1 << 5)
-#define I_CLEAR			(1 << 6)
-#define __I_SYNC		7
-#define I_SYNC			(1 << __I_SYNC)
-#define I_REFERENCED		(1 << 8)
-#define __I_DIO_WAKEUP		9
-#define I_DIO_WAKEUP		(1 << I_DIO_WAKEUP)
-
-#define I_DIRTY (I_DIRTY_SYNC | I_DIRTY_DATASYNC | I_DIRTY_PAGES)
-
-extern void __mark_inode_dirty(struct inode *, int);
-static inline void mark_inode_dirty(struct inode *inode)
-{
-	__mark_inode_dirty(inode, I_DIRTY);
-}
-
-static inline void mark_inode_dirty_sync(struct inode *inode)
-{
-	__mark_inode_dirty(inode, I_DIRTY_SYNC);
-}
-
-extern void inc_nlink(struct inode *inode);
-extern void drop_nlink(struct inode *inode);
-extern void clear_nlink(struct inode *inode);
-extern void set_nlink(struct inode *inode, unsigned int nlink);
-
-static inline void inode_inc_link_count(struct inode *inode)
-{
-	inc_nlink(inode);
-	mark_inode_dirty(inode);
-}
-
-static inline void inode_dec_link_count(struct inode *inode)
-{
-	drop_nlink(inode);
-	mark_inode_dirty(inode);
-}
-
-/**
- * inode_inc_iversion - increments i_version
- * @inode: inode that need to be updated
- *
- * Every time the inode is modified, the i_version field will be incremented.
- * The filesystem has to be mounted with i_version flag
- */
-
-static inline void inode_inc_iversion(struct inode *inode)
-{
-       spin_lock(&inode->i_lock);
-       inode->i_version++;
-       spin_unlock(&inode->i_lock);
-}
-
-extern void touch_atime(struct path *);
-static inline void file_accessed(struct file *file)
-{
-	if (!(file->f_flags & O_NOATIME))
-		touch_atime(&file->f_path);
-}
-
-int sync_inode(struct inode *inode, struct writeback_control *wbc);
-int sync_inode_metadata(struct inode *inode, int wait);
-
-struct file_system_type {
-	const char *name;
-	int fs_flags;
-	struct dentry *(*mount) (struct file_system_type *, int,
-		       const char *, void *);
-	void (*kill_sb) (struct super_block *);
-	struct module *owner;
-	struct file_system_type * next;
-	struct hlist_head fs_supers;
-
-	struct lock_class_key s_lock_key;
-	struct lock_class_key s_umount_key;
-	struct lock_class_key s_vfs_rename_key;
-
-	struct lock_class_key i_lock_key;
-	struct lock_class_key i_mutex_key;
-	struct lock_class_key i_mutex_dir_key;
-};
-
-extern struct dentry *mount_ns(struct file_system_type *fs_type, int flags,
-	void *data, int (*fill_super)(struct super_block *, void *, int));
-extern struct dentry *mount_bdev(struct file_system_type *fs_type,
-	int flags, const char *dev_name, void *data,
-	int (*fill_super)(struct super_block *, void *, int));
-extern struct dentry *mount_single(struct file_system_type *fs_type,
-	int flags, void *data,
-	int (*fill_super)(struct super_block *, void *, int));
-extern struct dentry *mount_nodev(struct file_system_type *fs_type,
-	int flags, void *data,
-	int (*fill_super)(struct super_block *, void *, int));
-extern struct dentry *mount_subtree(struct vfsmount *mnt, const char *path);
-void generic_shutdown_super(struct super_block *sb);
-void kill_block_super(struct super_block *sb);
-void kill_anon_super(struct super_block *sb);
-void kill_litter_super(struct super_block *sb);
-void deactivate_super(struct super_block *sb);
-void deactivate_locked_super(struct super_block *sb);
-int set_anon_super(struct super_block *s, void *data);
-int get_anon_bdev(dev_t *);
-void free_anon_bdev(dev_t);
-struct super_block *sget(struct file_system_type *type,
-			int (*test)(struct super_block *,void *),
-			int (*set)(struct super_block *,void *),
-			void *data);
-extern struct dentry *mount_pseudo(struct file_system_type *, char *,
-	const struct super_operations *ops,
-	const struct dentry_operations *dops,
-	unsigned long);
-
-/* Alas, no aliases. Too much hassle with bringing module.h everywhere */
-#define fops_get(fops) \
-	(((fops) && try_module_get((fops)->owner) ? (fops) : NULL))
-#define fops_put(fops) \
-	do { if (fops) module_put((fops)->owner); } while(0)
-
-extern int register_filesystem(struct file_system_type *);
-extern int unregister_filesystem(struct file_system_type *);
-extern struct vfsmount *kern_mount_data(struct file_system_type *, void *data);
-#define kern_mount(type) kern_mount_data(type, NULL)
-extern void kern_unmount(struct vfsmount *mnt);
-extern int may_umount_tree(struct vfsmount *);
-extern int may_umount(struct vfsmount *);
-extern long do_mount(char *, char *, char *, unsigned long, void *);
-extern struct vfsmount *collect_mounts(struct path *);
-extern void drop_collected_mounts(struct vfsmount *);
-extern int iterate_mounts(int (*)(struct vfsmount *, void *), void *,
-			  struct vfsmount *);
-extern int vfs_statfs(struct path *, struct kstatfs *);
-extern int user_statfs(const char __user *, struct kstatfs *);
-extern int fd_statfs(int, struct kstatfs *);
-extern int vfs_ustat(dev_t, struct kstatfs *);
-extern int freeze_super(struct super_block *super);
-extern int thaw_super(struct super_block *super);
-extern bool our_mnt(struct vfsmount *mnt);
-
-extern int current_umask(void);
-
-/* /sys/fs */
-extern struct kobject *fs_kobj;
-
-#define MAX_RW_COUNT (INT_MAX & PAGE_CACHE_MASK)
-extern int rw_verify_area(int, struct file *, loff_t *, size_t);
-
-#define FLOCK_VERIFY_READ  1
-#define FLOCK_VERIFY_WRITE 2
-
-#ifdef CONFIG_FILE_LOCKING
-extern int locks_mandatory_locked(struct inode *);
-extern int locks_mandatory_area(int, struct inode *, struct file *, loff_t, size_t);
-
-/*
- * Candidates for mandatory locking have the setgid bit set
- * but no group execute bit -  an otherwise meaningless combination.
- */
-
-static inline int __mandatory_lock(struct inode *ino)
-{
-	return (ino->i_mode & (S_ISGID | S_IXGRP)) == S_ISGID;
-}
-
-/*
- * ... and these candidates should be on MS_MANDLOCK mounted fs,
- * otherwise these will be advisory locks
- */
-
-static inline int mandatory_lock(struct inode *ino)
-{
-	return IS_MANDLOCK(ino) && __mandatory_lock(ino);
-}
-
-static inline int locks_verify_locked(struct inode *inode)
-{
-	if (mandatory_lock(inode))
-		return locks_mandatory_locked(inode);
-	return 0;
-}
-
-static inline int locks_verify_truncate(struct inode *inode,
-				    struct file *filp,
-				    loff_t size)
-{
-	if (inode->i_flock && mandatory_lock(inode))
-		return locks_mandatory_area(
-			FLOCK_VERIFY_WRITE, inode, filp,
-			size < inode->i_size ? size : inode->i_size,
-			(size < inode->i_size ? inode->i_size - size
-			 : size - inode->i_size)
-		);
-	return 0;
-}
-
-static inline int break_lease(struct inode *inode, unsigned int mode)
-{
-	if (inode->i_flock)
-		return __break_lease(inode, mode);
-	return 0;
-}
-#else /* !CONFIG_FILE_LOCKING */
-static inline int locks_mandatory_locked(struct inode *inode)
-{
-	return 0;
-}
-
-static inline int locks_mandatory_area(int rw, struct inode *inode,
-				       struct file *filp, loff_t offset,
-				       size_t count)
-{
-	return 0;
-}
-
-static inline int __mandatory_lock(struct inode *inode)
-{
-	return 0;
-}
-
-static inline int mandatory_lock(struct inode *inode)
-{
-	return 0;
-}
-
-static inline int locks_verify_locked(struct inode *inode)
-{
-	return 0;
-}
-
-static inline int locks_verify_truncate(struct inode *inode, struct file *filp,
-					size_t size)
-{
-	return 0;
-}
-
-static inline int break_lease(struct inode *inode, unsigned int mode)
-{
-	return 0;
-}
-
-#endif /* CONFIG_FILE_LOCKING */
-
-/* fs/open.c */
-
-extern int do_truncate(struct dentry *, loff_t start, unsigned int time_attrs,
-		       struct file *filp);
-extern int do_fallocate(struct file *file, int mode, loff_t offset,
-			loff_t len);
-extern long do_sys_open(int dfd, const char __user *filename, int flags,
-			umode_t mode);
-extern struct file *filp_open(const char *, int, umode_t);
-extern struct file *file_open_root(struct dentry *, struct vfsmount *,
-				   const char *, int);
-extern struct file * dentry_open(struct dentry *, struct vfsmount *, int,
-				 const struct cred *);
-extern int filp_close(struct file *, fl_owner_t id);
-extern char * getname(const char __user *);
-
-/* fs/ioctl.c */
-
-extern int ioctl_preallocate(struct file *filp, void __user *argp);
-
-/* fs/dcache.c */
-extern void __init vfs_caches_init_early(void);
-extern void __init vfs_caches_init(unsigned long);
-
-extern struct kmem_cache *names_cachep;
-
-#define __getname_gfp(gfp)	kmem_cache_alloc(names_cachep, (gfp))
-#define __getname()		__getname_gfp(GFP_KERNEL)
-#define __putname(name)		kmem_cache_free(names_cachep, (void *)(name))
-#ifndef CONFIG_AUDITSYSCALL
-#define putname(name)   __putname(name)
-#else
-extern void putname(const char *name);
-#endif
-
-#ifdef CONFIG_BLOCK
-extern int register_blkdev(unsigned int, const char *);
-extern void unregister_blkdev(unsigned int, const char *);
-extern struct block_device *bdget(dev_t);
-extern struct block_device *bdgrab(struct block_device *bdev);
-extern void bd_set_size(struct block_device *, loff_t size);
-extern sector_t blkdev_max_block(struct block_device *bdev);
-extern void bd_forget(struct inode *inode);
-extern void bdput(struct block_device *);
-extern void invalidate_bdev(struct block_device *);
-extern int sync_blockdev(struct block_device *bdev);
-extern void kill_bdev(struct block_device *);
-extern struct super_block *freeze_bdev(struct block_device *);
-extern void emergency_thaw_all(void);
-extern int thaw_bdev(struct block_device *bdev, struct super_block *sb);
-extern int fsync_bdev(struct block_device *);
-#else
-static inline void bd_forget(struct inode *inode) {}
-static inline int sync_blockdev(struct block_device *bdev) { return 0; }
-static inline void kill_bdev(struct block_device *bdev) {}
-static inline void invalidate_bdev(struct block_device *bdev) {}
-
-static inline struct super_block *freeze_bdev(struct block_device *sb)
-{
-	return NULL;
-}
-
-static inline int thaw_bdev(struct block_device *bdev, struct super_block *sb)
-{
-	return 0;
-}
-#endif
-extern int sync_filesystem(struct super_block *);
-extern const struct file_operations def_blk_fops;
-extern const struct file_operations def_chr_fops;
-extern const struct file_operations bad_sock_fops;
-extern const struct file_operations def_fifo_fops;
-#ifdef CONFIG_BLOCK
-extern int ioctl_by_bdev(struct block_device *, unsigned, unsigned long);
-extern int blkdev_ioctl(struct block_device *, fmode_t, unsigned, unsigned long);
-extern long compat_blkdev_ioctl(struct file *, unsigned, unsigned long);
-extern int blkdev_get(struct block_device *bdev, fmode_t mode, void *holder);
-extern struct block_device *blkdev_get_by_path(const char *path, fmode_t mode,
-					       void *holder);
-extern struct block_device *blkdev_get_by_dev(dev_t dev, fmode_t mode,
-					      void *holder);
-extern int blkdev_put(struct block_device *bdev, fmode_t mode);
-#ifdef CONFIG_SYSFS
-extern int bd_link_disk_holder(struct block_device *bdev, struct gendisk *disk);
-extern void bd_unlink_disk_holder(struct block_device *bdev,
-				  struct gendisk *disk);
-#else
-static inline int bd_link_disk_holder(struct block_device *bdev,
-				      struct gendisk *disk)
-{
-	return 0;
-}
-static inline void bd_unlink_disk_holder(struct block_device *bdev,
-					 struct gendisk *disk)
-{
-}
-#endif
-#endif
-
-/* fs/char_dev.c */
-#define CHRDEV_MAJOR_HASH_SIZE	255
-extern int alloc_chrdev_region(dev_t *, unsigned, unsigned, const char *);
-extern int register_chrdev_region(dev_t, unsigned, const char *);
-extern int __register_chrdev(unsigned int major, unsigned int baseminor,
-			     unsigned int count, const char *name,
-			     const struct file_operations *fops);
-extern void __unregister_chrdev(unsigned int major, unsigned int baseminor,
-				unsigned int count, const char *name);
-extern void unregister_chrdev_region(dev_t, unsigned);
-extern void chrdev_show(struct seq_file *,off_t);
-
-static inline int register_chrdev(unsigned int major, const char *name,
-				  const struct file_operations *fops)
-{
-	return __register_chrdev(major, 0, 256, name, fops);
-}
-
-static inline void unregister_chrdev(unsigned int major, const char *name)
-{
-	__unregister_chrdev(major, 0, 256, name);
-}
-
-/* fs/block_dev.c */
-#define BDEVNAME_SIZE	32	/* Largest string for a blockdev identifier */
-#define BDEVT_SIZE	10	/* Largest string for MAJ:MIN for blkdev */
-
-#ifdef CONFIG_BLOCK
-#define BLKDEV_MAJOR_HASH_SIZE	255
-extern const char *__bdevname(dev_t, char *buffer);
-extern const char *bdevname(struct block_device *bdev, char *buffer);
-extern struct block_device *lookup_bdev(const char *);
-extern void blkdev_show(struct seq_file *,off_t);
-
-#else
-#define BLKDEV_MAJOR_HASH_SIZE	0
-#endif
-
-extern void init_special_inode(struct inode *, umode_t, dev_t);
-
-/* Invalid inode operations -- fs/bad_inode.c */
-extern void make_bad_inode(struct inode *);
-extern int is_bad_inode(struct inode *);
-
-extern const struct file_operations read_pipefifo_fops;
-extern const struct file_operations write_pipefifo_fops;
-extern const struct file_operations rdwr_pipefifo_fops;
-
-#ifdef CONFIG_BLOCK
-/*
- * return READ, READA, or WRITE
- */
-#define bio_rw(bio)		((bio)->bi_rw & (RW_MASK | RWA_MASK))
-
-/*
- * return data direction, READ or WRITE
- */
-#define bio_data_dir(bio)	((bio)->bi_rw & 1)
-
-extern void check_disk_size_change(struct gendisk *disk,
-				   struct block_device *bdev);
-extern int revalidate_disk(struct gendisk *);
-extern int check_disk_change(struct block_device *);
-extern int __invalidate_device(struct block_device *, bool);
-extern int invalidate_partition(struct gendisk *, int);
-#endif
-unsigned long invalidate_mapping_pages(struct address_space *mapping,
-					pgoff_t start, pgoff_t end);
-
-static inline void invalidate_remote_inode(struct inode *inode)
-{
-	if (S_ISREG(inode->i_mode) || S_ISDIR(inode->i_mode) ||
-	    S_ISLNK(inode->i_mode))
-		invalidate_mapping_pages(inode->i_mapping, 0, -1);
-}
-extern int invalidate_inode_pages2(struct address_space *mapping);
-extern int invalidate_inode_pages2_range(struct address_space *mapping,
-					 pgoff_t start, pgoff_t end);
-extern int write_inode_now(struct inode *, int);
-extern int filemap_fdatawrite(struct address_space *);
-extern int filemap_flush(struct address_space *);
-extern int filemap_fdatawait(struct address_space *);
-extern int filemap_fdatawait_range(struct address_space *, loff_t lstart,
-				   loff_t lend);
-extern int filemap_write_and_wait(struct address_space *mapping);
-extern int filemap_write_and_wait_range(struct address_space *mapping,
-				        loff_t lstart, loff_t lend);
-extern int __filemap_fdatawrite_range(struct address_space *mapping,
-				loff_t start, loff_t end, int sync_mode);
-extern int filemap_fdatawrite_range(struct address_space *mapping,
-				loff_t start, loff_t end);
-
-extern int vfs_fsync_range(struct file *file, loff_t start, loff_t end,
-			   int datasync);
-extern int vfs_fsync(struct file *file, int datasync);
-extern int generic_write_sync(struct file *file, loff_t pos, loff_t count);
-extern void sync_supers(void);
-extern void emergency_sync(void);
-extern void emergency_remount(void);
-#ifdef CONFIG_BLOCK
-extern sector_t bmap(struct inode *, sector_t);
-#endif
-extern int notify_change(struct dentry *, struct iattr *);
-extern int inode_permission(struct inode *, int);
-extern int generic_permission(struct inode *, int);
-
-static inline bool execute_ok(struct inode *inode)
-{
-	return (inode->i_mode & S_IXUGO) || S_ISDIR(inode->i_mode);
-}
-
-/*
- * get_write_access() gets write permission for a file.
- * put_write_access() releases this write permission.
- * This is used for regular files.
- * We cannot support write (and maybe mmap read-write shared) accesses and
- * MAP_DENYWRITE mmappings simultaneously. The i_writecount field of an inode
- * can have the following values:
- * 0: no writers, no VM_DENYWRITE mappings
- * < 0: (-i_writecount) vm_area_structs with VM_DENYWRITE set exist
- * > 0: (i_writecount) users are writing to the file.
- *
- * Normally we operate on that counter with atomic_{inc,dec} and it's safe
- * except for the cases where we don't hold i_writecount yet. Then we need to
- * use {get,deny}_write_access() - these functions check the sign and refuse
- * to do the change if sign is wrong.
- */
-static inline int get_write_access(struct inode *inode)
-{
-	return atomic_inc_unless_negative(&inode->i_writecount) ? 0 : -ETXTBSY;
-}
-static inline int deny_write_access(struct file *file)
-{
-	struct inode *inode = file->f_path.dentry->d_inode;
-	return atomic_dec_unless_positive(&inode->i_writecount) ? 0 : -ETXTBSY;
-}
-static inline void put_write_access(struct inode * inode)
-{
-	atomic_dec(&inode->i_writecount);
-}
-static inline void allow_write_access(struct file *file)
-{
-	if (file)
-		atomic_inc(&file->f_path.dentry->d_inode->i_writecount);
-}
-#ifdef CONFIG_IMA
-static inline void i_readcount_dec(struct inode *inode)
-{
-	BUG_ON(!atomic_read(&inode->i_readcount));
-	atomic_dec(&inode->i_readcount);
-}
-static inline void i_readcount_inc(struct inode *inode)
-{
-	atomic_inc(&inode->i_readcount);
-}
-#else
-static inline void i_readcount_dec(struct inode *inode)
-{
-	return;
-}
-static inline void i_readcount_inc(struct inode *inode)
-{
-	return;
-}
-#endif
-extern int do_pipe_flags(int *, int);
-extern struct file *create_read_pipe(struct file *f, int flags);
-extern struct file *create_write_pipe(int flags);
-extern void free_write_pipe(struct file *);
-
-extern int kernel_read(struct file *, loff_t, char *, unsigned long);
-extern struct file * open_exec(const char *);
- 
-/* fs/dcache.c -- generic fs support functions */
-extern int is_subdir(struct dentry *, struct dentry *);
-extern int path_is_under(struct path *, struct path *);
-extern ino_t find_inode_number(struct dentry *, struct qstr *);
-
-#include <linux/err.h>
-
-/* needed for stackable file system support */
-extern loff_t default_llseek(struct file *file, loff_t offset, int origin);
-
-extern loff_t vfs_llseek(struct file *file, loff_t offset, int origin);
-
-extern int inode_init_always(struct super_block *, struct inode *);
-extern void inode_init_once(struct inode *);
-extern void address_space_init_once(struct address_space *mapping);
-extern void ihold(struct inode * inode);
-extern void iput(struct inode *);
-extern struct inode * igrab(struct inode *);
-extern ino_t iunique(struct super_block *, ino_t);
-extern int inode_needs_sync(struct inode *inode);
-extern int generic_delete_inode(struct inode *inode);
-static inline int generic_drop_inode(struct inode *inode)
-{
-	return !inode->i_nlink || inode_unhashed(inode);
-}
-
-extern struct inode *ilookup5_nowait(struct super_block *sb,
-		unsigned long hashval, int (*test)(struct inode *, void *),
-		void *data);
-extern struct inode *ilookup5(struct super_block *sb, unsigned long hashval,
-		int (*test)(struct inode *, void *), void *data);
-extern struct inode *ilookup(struct super_block *sb, unsigned long ino);
-
-extern struct inode * iget5_locked(struct super_block *, unsigned long, int (*test)(struct inode *, void *), int (*set)(struct inode *, void *), void *);
-extern struct inode * iget_locked(struct super_block *, unsigned long);
-extern int insert_inode_locked4(struct inode *, unsigned long, int (*test)(struct inode *, void *), void *);
-extern int insert_inode_locked(struct inode *);
-#ifdef CONFIG_DEBUG_LOCK_ALLOC
-extern void lockdep_annotate_inode_mutex_key(struct inode *inode);
-#else
-static inline void lockdep_annotate_inode_mutex_key(struct inode *inode) { };
-#endif
-extern void unlock_new_inode(struct inode *);
-extern unsigned int get_next_ino(void);
-
-extern void __iget(struct inode * inode);
-extern void iget_failed(struct inode *);
-extern void end_writeback(struct inode *);
-extern void __destroy_inode(struct inode *);
-extern struct inode *new_inode_pseudo(struct super_block *sb);
-extern struct inode *new_inode(struct super_block *sb);
-extern void free_inode_nonrcu(struct inode *inode);
-extern int should_remove_suid(struct dentry *);
-extern int file_remove_suid(struct file *);
-
-extern void __insert_inode_hash(struct inode *, unsigned long hashval);
-static inline void insert_inode_hash(struct inode *inode)
-{
-	__insert_inode_hash(inode, inode->i_ino);
-}
-
-extern void __remove_inode_hash(struct inode *);
-static inline void remove_inode_hash(struct inode *inode)
-{
-	if (!inode_unhashed(inode))
-		__remove_inode_hash(inode);
-}
-
-extern void inode_sb_list_add(struct inode *inode);
-
-#ifdef CONFIG_BLOCK
-extern void submit_bio(int, struct bio *);
-extern int bdev_read_only(struct block_device *);
-#endif
-extern int set_blocksize(struct block_device *, int);
-extern int sb_set_blocksize(struct super_block *, int);
-extern int sb_min_blocksize(struct super_block *, int);
-
-extern int generic_file_mmap(struct file *, struct vm_area_struct *);
-extern int generic_file_readonly_mmap(struct file *, struct vm_area_struct *);
-extern int file_read_actor(read_descriptor_t * desc, struct page *page, unsigned long offset, unsigned long size);
-int generic_write_checks(struct file *file, loff_t *pos, size_t *count, int isblk);
-extern ssize_t generic_file_aio_read(struct kiocb *, const struct iovec *, unsigned long, loff_t);
-extern ssize_t __generic_file_aio_write(struct kiocb *, const struct iovec *, unsigned long,
-		loff_t *);
-extern ssize_t generic_file_aio_write(struct kiocb *, const struct iovec *, unsigned long, loff_t);
-extern ssize_t generic_file_direct_write(struct kiocb *, const struct iovec *,
-		unsigned long *, loff_t, loff_t *, size_t, size_t);
-extern ssize_t generic_file_buffered_write(struct kiocb *, const struct iovec *,
-		unsigned long, loff_t, loff_t *, size_t, ssize_t);
-extern ssize_t do_sync_read(struct file *filp, char __user *buf, size_t len, loff_t *ppos);
-extern ssize_t do_sync_write(struct file *filp, const char __user *buf, size_t len, loff_t *ppos);
-extern int generic_segment_checks(const struct iovec *iov,
-		unsigned long *nr_segs, size_t *count, int access_flags);
-
-/* fs/block_dev.c */
-extern ssize_t blkdev_aio_write(struct kiocb *iocb, const struct iovec *iov,
-				unsigned long nr_segs, loff_t pos);
-extern int blkdev_fsync(struct file *filp, loff_t start, loff_t end,
-			int datasync);
-extern void block_sync_page(struct page *page);
-
-/* fs/splice.c */
-extern ssize_t generic_file_splice_read(struct file *, loff_t *,
-		struct pipe_inode_info *, size_t, unsigned int);
-extern ssize_t default_file_splice_read(struct file *, loff_t *,
-		struct pipe_inode_info *, size_t, unsigned int);
-extern ssize_t generic_file_splice_write(struct pipe_inode_info *,
-		struct file *, loff_t *, size_t, unsigned int);
-extern ssize_t generic_splice_sendpage(struct pipe_inode_info *pipe,
-		struct file *out, loff_t *, size_t len, unsigned int flags);
-extern long do_splice_direct(struct file *in, loff_t *ppos, struct file *out,
-		size_t len, unsigned int flags);
-
-extern void
-file_ra_state_init(struct file_ra_state *ra, struct address_space *mapping);
-extern loff_t noop_llseek(struct file *file, loff_t offset, int origin);
-extern loff_t no_llseek(struct file *file, loff_t offset, int origin);
-extern loff_t generic_file_llseek(struct file *file, loff_t offset, int origin);
-extern loff_t generic_file_llseek_size(struct file *file, loff_t offset,
-		int origin, loff_t maxsize);
-extern int generic_file_open(struct inode * inode, struct file * filp);
-extern int nonseekable_open(struct inode * inode, struct file * filp);
-
-#ifdef CONFIG_FS_XIP
-extern ssize_t xip_file_read(struct file *filp, char __user *buf, size_t len,
-			     loff_t *ppos);
-extern int xip_file_mmap(struct file * file, struct vm_area_struct * vma);
-extern ssize_t xip_file_write(struct file *filp, const char __user *buf,
-			      size_t len, loff_t *ppos);
-extern int xip_truncate_page(struct address_space *mapping, loff_t from);
-#else
-static inline int xip_truncate_page(struct address_space *mapping, loff_t from)
-{
-	return 0;
-}
-#endif
-
-#ifdef CONFIG_BLOCK
-typedef void (dio_submit_t)(int rw, struct bio *bio, struct inode *inode,
-			    loff_t file_offset);
-
-enum {
-	/* need locking between buffered and direct access */
-	DIO_LOCKING	= 0x01,
-
-	/* filesystem does not support filling holes */
-	DIO_SKIP_HOLES	= 0x02,
-};
-
-void dio_end_io(struct bio *bio, int error);
-void inode_dio_wait(struct inode *inode);
-void inode_dio_done(struct inode *inode);
-
-ssize_t __blockdev_direct_IO(int rw, struct kiocb *iocb, struct inode *inode,
-	struct block_device *bdev, const struct iovec *iov, loff_t offset,
-	unsigned long nr_segs, get_block_t get_block, dio_iodone_t end_io,
-	dio_submit_t submit_io,	int flags);
-
-static inline ssize_t blockdev_direct_IO(int rw, struct kiocb *iocb,
-		struct inode *inode, const struct iovec *iov, loff_t offset,
-		unsigned long nr_segs, get_block_t get_block)
-{
-	return __blockdev_direct_IO(rw, iocb, inode, inode->i_sb->s_bdev, iov,
-				    offset, nr_segs, get_block, NULL, NULL,
-				    DIO_LOCKING | DIO_SKIP_HOLES);
-}
-#else
-static inline void inode_dio_wait(struct inode *inode)
-{
-}
-#endif
-
-extern const struct file_operations generic_ro_fops;
-
-#define special_file(m) (S_ISCHR(m)||S_ISBLK(m)||S_ISFIFO(m)||S_ISSOCK(m))
-
-extern int vfs_readlink(struct dentry *, char __user *, int, const char *);
-extern int vfs_follow_link(struct nameidata *, const char *);
-extern int page_readlink(struct dentry *, char __user *, int);
-extern void *page_follow_link_light(struct dentry *, struct nameidata *);
-extern void page_put_link(struct dentry *, struct nameidata *, void *);
-extern int __page_symlink(struct inode *inode, const char *symname, int len,
-		int nofs);
-extern int page_symlink(struct inode *inode, const char *symname, int len);
-extern const struct inode_operations page_symlink_inode_operations;
-extern int generic_readlink(struct dentry *, char __user *, int);
-extern void generic_fillattr(struct inode *, struct kstat *);
-extern int vfs_getattr(struct vfsmount *, struct dentry *, struct kstat *);
-void __inode_add_bytes(struct inode *inode, loff_t bytes);
-void inode_add_bytes(struct inode *inode, loff_t bytes);
-void inode_sub_bytes(struct inode *inode, loff_t bytes);
-loff_t inode_get_bytes(struct inode *inode);
-void inode_set_bytes(struct inode *inode, loff_t bytes);
-
-extern int vfs_readdir(struct file *, filldir_t, void *);
-
-extern int vfs_stat(const char __user *, struct kstat *);
-extern int vfs_lstat(const char __user *, struct kstat *);
-extern int vfs_fstat(unsigned int, struct kstat *);
-extern int vfs_fstatat(int , const char __user *, struct kstat *, int);
-
-extern int do_vfs_ioctl(struct file *filp, unsigned int fd, unsigned int cmd,
-		    unsigned long arg);
-extern int __generic_block_fiemap(struct inode *inode,
-				  struct fiemap_extent_info *fieinfo,
-				  loff_t start, loff_t len,
-				  get_block_t *get_block);
-extern int generic_block_fiemap(struct inode *inode,
-				struct fiemap_extent_info *fieinfo, u64 start,
-				u64 len, get_block_t *get_block);
-
-extern void get_filesystem(struct file_system_type *fs);
-extern void put_filesystem(struct file_system_type *fs);
-extern struct file_system_type *get_fs_type(const char *name);
-extern struct super_block *get_super(struct block_device *);
-extern struct super_block *get_super_thawed(struct block_device *);
-extern struct super_block *get_active_super(struct block_device *bdev);
-extern void drop_super(struct super_block *sb);
-extern void iterate_supers(void (*)(struct super_block *, void *), void *);
-extern void iterate_supers_type(struct file_system_type *,
-			        void (*)(struct super_block *, void *), void *);
-
-extern int dcache_dir_open(struct inode *, struct file *);
-extern int dcache_dir_close(struct inode *, struct file *);
-extern loff_t dcache_dir_lseek(struct file *, loff_t, int);
-extern int dcache_readdir(struct file *, void *, filldir_t);
-extern int simple_setattr(struct dentry *, struct iattr *);
-extern int simple_getattr(struct vfsmount *, struct dentry *, struct kstat *);
-extern int simple_statfs(struct dentry *, struct kstatfs *);
-extern int simple_open(struct inode *inode, struct file *file);
-extern int simple_link(struct dentry *, struct inode *, struct dentry *);
-extern int simple_unlink(struct inode *, struct dentry *);
-extern int simple_rmdir(struct inode *, struct dentry *);
-extern int simple_rename(struct inode *, struct dentry *, struct inode *, struct dentry *);
-extern int noop_fsync(struct file *, loff_t, loff_t, int);
-extern int simple_empty(struct dentry *);
-extern int simple_readpage(struct file *file, struct page *page);
-extern int simple_write_begin(struct file *file, struct address_space *mapping,
-			loff_t pos, unsigned len, unsigned flags,
-			struct page **pagep, void **fsdata);
-extern int simple_write_end(struct file *file, struct address_space *mapping,
-			loff_t pos, unsigned len, unsigned copied,
-			struct page *page, void *fsdata);
-
-extern struct dentry *simple_lookup(struct inode *, struct dentry *, struct nameidata *);
-extern ssize_t generic_read_dir(struct file *, char __user *, size_t, loff_t *);
-extern const struct file_operations simple_dir_operations;
-extern const struct inode_operations simple_dir_inode_operations;
-struct tree_descr { char *name; const struct file_operations *ops; int mode; };
-struct dentry *d_alloc_name(struct dentry *, const char *);
-extern int simple_fill_super(struct super_block *, unsigned long, struct tree_descr *);
-extern int simple_pin_fs(struct file_system_type *, struct vfsmount **mount, int *count);
-extern void simple_release_fs(struct vfsmount **mount, int *count);
-
-extern ssize_t simple_read_from_buffer(void __user *to, size_t count,
-			loff_t *ppos, const void *from, size_t available);
-extern ssize_t simple_write_to_buffer(void *to, size_t available, loff_t *ppos,
-		const void __user *from, size_t count);
-
-extern int generic_file_fsync(struct file *, loff_t, loff_t, int);
-
-extern int generic_check_addressable(unsigned, u64);
-
-#ifdef CONFIG_MIGRATION
-extern int buffer_migrate_page(struct address_space *,
-				struct page *, struct page *,
-				enum migrate_mode);
-#else
-#define buffer_migrate_page NULL
-#endif
-
-extern int inode_change_ok(const struct inode *, struct iattr *);
-extern int inode_newsize_ok(const struct inode *, loff_t offset);
-extern void setattr_copy(struct inode *inode, const struct iattr *attr);
-
-extern void file_update_time(struct file *file);
-
-extern int generic_show_options(struct seq_file *m, struct dentry *root);
-extern void save_mount_options(struct super_block *sb, char *options);
-extern void replace_mount_options(struct super_block *sb, char *options);
-
-static inline ino_t parent_ino(struct dentry *dentry)
-{
-	ino_t res;
-
-	/*
-	 * Don't strictly need d_lock here? If the parent ino could change
-	 * then surely we'd have a deeper race in the caller?
-	 */
-	spin_lock(&dentry->d_lock);
-	res = dentry->d_parent->d_inode->i_ino;
-	spin_unlock(&dentry->d_lock);
-	return res;
-}
-
-/* Transaction based IO helpers */
-
-/*
- * An argresp is stored in an allocated page and holds the
- * size of the argument or response, along with its content
- */
-struct simple_transaction_argresp {
-	ssize_t size;
-	char data[0];
-};
-
-#define SIMPLE_TRANSACTION_LIMIT (PAGE_SIZE - sizeof(struct simple_transaction_argresp))
-
-char *simple_transaction_get(struct file *file, const char __user *buf,
-				size_t size);
-ssize_t simple_transaction_read(struct file *file, char __user *buf,
-				size_t size, loff_t *pos);
-int simple_transaction_release(struct inode *inode, struct file *file);
-
-void simple_transaction_set(struct file *file, size_t n);
-
-/*
- * simple attribute files
- *
- * These attributes behave similar to those in sysfs:
- *
- * Writing to an attribute immediately sets a value, an open file can be
- * written to multiple times.
- *
- * Reading from an attribute creates a buffer from the value that might get
- * read with multiple read calls. When the attribute has been read
- * completely, no further read calls are possible until the file is opened
- * again.
- *
- * All attributes contain a text representation of a numeric value
- * that are accessed with the get() and set() functions.
- */
-#define DEFINE_SIMPLE_ATTRIBUTE(__fops, __get, __set, __fmt)		\
-static int __fops ## _open(struct inode *inode, struct file *file)	\
-{									\
-	__simple_attr_check_format(__fmt, 0ull);			\
-	return simple_attr_open(inode, file, __get, __set, __fmt);	\
-}									\
-static const struct file_operations __fops = {				\
-	.owner	 = THIS_MODULE,						\
-	.open	 = __fops ## _open,					\
-	.release = simple_attr_release,					\
-	.read	 = simple_attr_read,					\
-	.write	 = simple_attr_write,					\
-	.llseek	 = generic_file_llseek,					\
-};
-
-static inline __printf(1, 2)
-void __simple_attr_check_format(const char *fmt, ...)
-{
-	/* don't do anything, just let the compiler check the arguments; */
-}
-
-int simple_attr_open(struct inode *inode, struct file *file,
-		     int (*get)(void *, u64 *), int (*set)(void *, u64),
-		     const char *fmt);
-int simple_attr_release(struct inode *inode, struct file *file);
-ssize_t simple_attr_read(struct file *file, char __user *buf,
-			 size_t len, loff_t *ppos);
-ssize_t simple_attr_write(struct file *file, const char __user *buf,
-			  size_t len, loff_t *ppos);
-
-struct ctl_table;
-int proc_nr_files(struct ctl_table *table, int write,
-		  void __user *buffer, size_t *lenp, loff_t *ppos);
-int proc_nr_dentry(struct ctl_table *table, int write,
-		  void __user *buffer, size_t *lenp, loff_t *ppos);
-int proc_nr_inodes(struct ctl_table *table, int write,
-		   void __user *buffer, size_t *lenp, loff_t *ppos);
-int __init get_filesystem_list(char *buf);
-
-#define __FMODE_EXEC		((__force int) FMODE_EXEC)
-#define __FMODE_NONOTIFY	((__force int) FMODE_NONOTIFY)
-
-#define ACC_MODE(x) ("\004\002\006\006"[(x)&O_ACCMODE])
-#define OPEN_FMODE(flag) ((__force fmode_t)(((flag + 1) & O_ACCMODE) | \
-					    (flag & __FMODE_NONOTIFY)))
-
-static inline int is_sxid(umode_t mode)
-{
-	return (mode & S_ISUID) || ((mode & S_ISGID) && (mode & S_IXGRP));
-}
-
-static inline void inode_has_no_xattr(struct inode *inode)
-{
-	if (!is_sxid(inode->i_mode) && (inode->i_sb->s_flags & MS_NOSEC))
-		inode->i_flags |= S_NOSEC;
-}
-
-#endif /* __KERNEL__ */
-#endif /* _LINUX_FS_H */
diff --git a/ANDROID_3.4.5/include/linux/fs_enet_pd.h b/ANDROID_3.4.5/include/linux/fs_enet_pd.h
deleted file mode 100644
index 51b79346..00000000
--- a/ANDROID_3.4.5/include/linux/fs_enet_pd.h
+++ /dev/null
@@ -1,162 +0,0 @@
-/*
- * Platform information definitions for the
- * universal Freescale Ethernet driver.
- *
- * Copyright (c) 2003 Intracom S.A. 
- *  by Pantelis Antoniou <panto@intracom.gr>
- *
- * 2005 (c) MontaVista Software, Inc. 
- * Vitaly Bordug <vbordug@ru.mvista.com>
- *
- * This file is licensed under the terms of the GNU General Public License 
- * version 2. This program is licensed "as is" without any warranty of any 
- * kind, whether express or implied.
- */
-
-#ifndef FS_ENET_PD_H
-#define FS_ENET_PD_H
-
-#include <linux/string.h>
-#include <linux/of_mdio.h>
-#include <asm/types.h>
-
-#define FS_ENET_NAME	"fs_enet"
-
-enum fs_id {
-	fsid_fec1,
-	fsid_fec2,
-	fsid_fcc1,
-	fsid_fcc2,
-	fsid_fcc3,
-	fsid_scc1,
-	fsid_scc2,
-	fsid_scc3,
-	fsid_scc4,
-};
-
-#define FS_MAX_INDEX	9
-
-static inline int fs_get_fec_index(enum fs_id id)
-{
-	if (id >= fsid_fec1 && id <= fsid_fec2)
-		return id - fsid_fec1;
-	return -1;
-}
-
-static inline int fs_get_fcc_index(enum fs_id id)
-{
-	if (id >= fsid_fcc1 && id <= fsid_fcc3)
-		return id - fsid_fcc1;
-	return -1;
-}
-
-static inline int fs_get_scc_index(enum fs_id id)
-{
-	if (id >= fsid_scc1 && id <= fsid_scc4)
-		return id - fsid_scc1;
-	return -1;
-}
-
-static inline int fs_fec_index2id(int index)
-{
-	int id = fsid_fec1 + index - 1;
-	if (id >= fsid_fec1 && id <= fsid_fec2)
-		return id;
-	return FS_MAX_INDEX;
-		}
-
-static inline int fs_fcc_index2id(int index)
-{
-	int id = fsid_fcc1 + index - 1;
-	if (id >= fsid_fcc1 && id <= fsid_fcc3)
-		return id;
-	return FS_MAX_INDEX;
-}
-
-static inline int fs_scc_index2id(int index)
-{
-	int id = fsid_scc1 + index - 1;
-	if (id >= fsid_scc1 && id <= fsid_scc4)
-		return id;
-	return FS_MAX_INDEX;
-}
-
-enum fs_mii_method {
-	fsmii_fixed,
-	fsmii_fec,
-	fsmii_bitbang,
-};
-
-enum fs_ioport {
-	fsiop_porta,
-	fsiop_portb,
-	fsiop_portc,
-	fsiop_portd,
-	fsiop_porte,
-};
-
-struct fs_mii_bit {
-	u32 offset;
-	u8 bit;
-	u8 polarity;
-};
-struct fs_mii_bb_platform_info {
-	struct fs_mii_bit 	mdio_dir;
-	struct fs_mii_bit 	mdio_dat;
-	struct fs_mii_bit	mdc_dat;
-	int delay;	/* delay in us         */
-	int irq[32]; 	/* irqs per phy's */
-};
-
-struct fs_platform_info {
-
-	void(*init_ioports)(struct fs_platform_info *);
-	/* device specific information */
-	int fs_no;		/* controller index            */
-	char fs_type[4];	/* controller type             */
-
-	u32 cp_page;		/* CPM page */
-	u32 cp_block;		/* CPM sblock */
-	u32 cp_command;		/* CPM page/sblock/mcn */
-
-	u32 clk_trx;		/* some stuff for pins & mux configuration*/
-	u32 clk_rx;
-	u32 clk_tx;
-	u32 clk_route;
-	u32 clk_mask;
-
-	u32 mem_offset;
-	u32 dpram_offset;
-	u32 fcc_regs_c;
-	
-	u32 device_flags;
-
-	struct device_node *phy_node;
-	const struct fs_mii_bus_info *bus_info;
-
-	int rx_ring, tx_ring;	/* number of buffers on rx     */
-	__u8 macaddr[6];	/* mac address                 */
-	int rx_copybreak;	/* limit we copy small frames  */
-	int use_napi;		/* use NAPI                    */
-	int napi_weight;	/* NAPI weight                 */
-
-	int use_rmii;		/* use RMII mode 	       */
-	int has_phy;            /* if the network is phy container as well...*/
-};
-struct fs_mii_fec_platform_info {
-	u32 irq[32];
-	u32 mii_speed;
-};
-
-static inline int fs_get_id(struct fs_platform_info *fpi)
-{
-	if(strstr(fpi->fs_type, "SCC"))
-		return fs_scc_index2id(fpi->fs_no);
-	if(strstr(fpi->fs_type, "FCC"))
-		return fs_fcc_index2id(fpi->fs_no);
-	if(strstr(fpi->fs_type, "FEC"))
-		return fs_fec_index2id(fpi->fs_no);
-	return fpi->fs_no;
-}
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/fs_stack.h b/ANDROID_3.4.5/include/linux/fs_stack.h
deleted file mode 100644
index da317c71..00000000
--- a/ANDROID_3.4.5/include/linux/fs_stack.h
+++ /dev/null
@@ -1,29 +0,0 @@
-#ifndef _LINUX_FS_STACK_H
-#define _LINUX_FS_STACK_H
-
-/* This file defines generic functions used primarily by stackable
- * filesystems; none of these functions require i_mutex to be held.
- */
-
-#include <linux/fs.h>
-
-/* externs for fs/stack.c */
-extern void fsstack_copy_attr_all(struct inode *dest, const struct inode *src);
-extern void fsstack_copy_inode_size(struct inode *dst, struct inode *src);
-
-/* inlines */
-static inline void fsstack_copy_attr_atime(struct inode *dest,
-					   const struct inode *src)
-{
-	dest->i_atime = src->i_atime;
-}
-
-static inline void fsstack_copy_attr_times(struct inode *dest,
-					   const struct inode *src)
-{
-	dest->i_atime = src->i_atime;
-	dest->i_mtime = src->i_mtime;
-	dest->i_ctime = src->i_ctime;
-}
-
-#endif /* _LINUX_FS_STACK_H */
diff --git a/ANDROID_3.4.5/include/linux/fs_struct.h b/ANDROID_3.4.5/include/linux/fs_struct.h
deleted file mode 100644
index 003dc0fd..00000000
--- a/ANDROID_3.4.5/include/linux/fs_struct.h
+++ /dev/null
@@ -1,54 +0,0 @@
-#ifndef _LINUX_FS_STRUCT_H
-#define _LINUX_FS_STRUCT_H
-
-#include <linux/path.h>
-#include <linux/spinlock.h>
-#include <linux/seqlock.h>
-
-struct fs_struct {
-	int users;
-	spinlock_t lock;
-	seqcount_t seq;
-	int umask;
-	int in_exec;
-	struct path root, pwd;
-};
-
-extern struct kmem_cache *fs_cachep;
-
-extern void exit_fs(struct task_struct *);
-extern void set_fs_root(struct fs_struct *, struct path *);
-extern void set_fs_pwd(struct fs_struct *, struct path *);
-extern struct fs_struct *copy_fs_struct(struct fs_struct *);
-extern void free_fs_struct(struct fs_struct *);
-extern void daemonize_fs_struct(void);
-extern int unshare_fs_struct(void);
-
-static inline void get_fs_root(struct fs_struct *fs, struct path *root)
-{
-	spin_lock(&fs->lock);
-	*root = fs->root;
-	path_get(root);
-	spin_unlock(&fs->lock);
-}
-
-static inline void get_fs_pwd(struct fs_struct *fs, struct path *pwd)
-{
-	spin_lock(&fs->lock);
-	*pwd = fs->pwd;
-	path_get(pwd);
-	spin_unlock(&fs->lock);
-}
-
-static inline void get_fs_root_and_pwd(struct fs_struct *fs, struct path *root,
-				       struct path *pwd)
-{
-	spin_lock(&fs->lock);
-	*root = fs->root;
-	path_get(root);
-	*pwd = fs->pwd;
-	path_get(pwd);
-	spin_unlock(&fs->lock);
-}
-
-#endif /* _LINUX_FS_STRUCT_H */
diff --git a/ANDROID_3.4.5/include/linux/fs_uart_pd.h b/ANDROID_3.4.5/include/linux/fs_uart_pd.h
deleted file mode 100644
index 36b61ff3..00000000
--- a/ANDROID_3.4.5/include/linux/fs_uart_pd.h
+++ /dev/null
@@ -1,71 +0,0 @@
-/*
- * Platform information definitions for the CPM Uart driver.
- *
- * 2006 (c) MontaVista Software, Inc.
- * Vitaly Bordug <vbordug@ru.mvista.com>
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#ifndef FS_UART_PD_H
-#define FS_UART_PD_H
-
-#include <asm/types.h>
-
-enum fs_uart_id {
-	fsid_smc1_uart,
-	fsid_smc2_uart,
-	fsid_scc1_uart,
-	fsid_scc2_uart,
-	fsid_scc3_uart,
-	fsid_scc4_uart,
-	fs_uart_nr,
-};
-
-static inline int fs_uart_id_scc2fsid(int id)
-{
-    return fsid_scc1_uart + id - 1;
-}
-
-static inline int fs_uart_id_fsid2scc(int id)
-{
-    return id - fsid_scc1_uart + 1;
-}
-
-static inline int fs_uart_id_smc2fsid(int id)
-{
-    return fsid_smc1_uart + id - 1;
-}
-
-static inline int fs_uart_id_fsid2smc(int id)
-{
-    return id - fsid_smc1_uart + 1;
-}
-
-struct fs_uart_platform_info {
-        void(*init_ioports)(struct fs_uart_platform_info *);
-	/* device specific information */
-	int fs_no;		/* controller index */
-	char fs_type[4];        /* controller type  */
-	u32 uart_clk;
-	u8 tx_num_fifo;
-	u8 tx_buf_size;
-	u8 rx_num_fifo;
-	u8 rx_buf_size;
-	u8 brg;
-	u8 clk_rx;
-	u8 clk_tx;
-};
-
-static inline int fs_uart_get_id(struct fs_uart_platform_info *fpi)
-{
-        if(strstr(fpi->fs_type, "SMC"))
-                return fs_uart_id_smc2fsid(fpi->fs_no);
-        if(strstr(fpi->fs_type, "SCC"))
-                return fs_uart_id_scc2fsid(fpi->fs_no);
-        return fpi->fs_no;
-}
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/fscache-cache.h b/ANDROID_3.4.5/include/linux/fscache-cache.h
deleted file mode 100644
index ce31408b..00000000
--- a/ANDROID_3.4.5/include/linux/fscache-cache.h
+++ /dev/null
@@ -1,516 +0,0 @@
-/* General filesystem caching backing cache interface
- *
- * Copyright (C) 2004-2007 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- *
- * NOTE!!! See:
- *
- *	Documentation/filesystems/caching/backend-api.txt
- *
- * for a description of the cache backend interface declared here.
- */
-
-#ifndef _LINUX_FSCACHE_CACHE_H
-#define _LINUX_FSCACHE_CACHE_H
-
-#include <linux/fscache.h>
-#include <linux/sched.h>
-#include <linux/workqueue.h>
-
-#define NR_MAXCACHES BITS_PER_LONG
-
-struct fscache_cache;
-struct fscache_cache_ops;
-struct fscache_object;
-struct fscache_operation;
-
-/*
- * cache tag definition
- */
-struct fscache_cache_tag {
-	struct list_head	link;
-	struct fscache_cache	*cache;		/* cache referred to by this tag */
-	unsigned long		flags;
-#define FSCACHE_TAG_RESERVED	0		/* T if tag is reserved for a cache */
-	atomic_t		usage;
-	char			name[0];	/* tag name */
-};
-
-/*
- * cache definition
- */
-struct fscache_cache {
-	const struct fscache_cache_ops *ops;
-	struct fscache_cache_tag *tag;		/* tag representing this cache */
-	struct kobject		*kobj;		/* system representation of this cache */
-	struct list_head	link;		/* link in list of caches */
-	size_t			max_index_size;	/* maximum size of index data */
-	char			identifier[36];	/* cache label */
-
-	/* node management */
-	struct work_struct	op_gc;		/* operation garbage collector */
-	struct list_head	object_list;	/* list of data/index objects */
-	struct list_head	op_gc_list;	/* list of ops to be deleted */
-	spinlock_t		object_list_lock;
-	spinlock_t		op_gc_list_lock;
-	atomic_t		object_count;	/* no. of live objects in this cache */
-	struct fscache_object	*fsdef;		/* object for the fsdef index */
-	unsigned long		flags;
-#define FSCACHE_IOERROR		0	/* cache stopped on I/O error */
-#define FSCACHE_CACHE_WITHDRAWN	1	/* cache has been withdrawn */
-};
-
-extern wait_queue_head_t fscache_cache_cleared_wq;
-
-/*
- * operation to be applied to a cache object
- * - retrieval initiation operations are done in the context of the process
- *   that issued them, and not in an async thread pool
- */
-typedef void (*fscache_operation_release_t)(struct fscache_operation *op);
-typedef void (*fscache_operation_processor_t)(struct fscache_operation *op);
-
-struct fscache_operation {
-	struct work_struct	work;		/* record for async ops */
-	struct list_head	pend_link;	/* link in object->pending_ops */
-	struct fscache_object	*object;	/* object to be operated upon */
-
-	unsigned long		flags;
-#define FSCACHE_OP_TYPE		0x000f	/* operation type */
-#define FSCACHE_OP_ASYNC	0x0001	/* - async op, processor may sleep for disk */
-#define FSCACHE_OP_MYTHREAD	0x0002	/* - processing is done be issuing thread, not pool */
-#define FSCACHE_OP_WAITING	4	/* cleared when op is woken */
-#define FSCACHE_OP_EXCLUSIVE	5	/* exclusive op, other ops must wait */
-#define FSCACHE_OP_DEAD		6	/* op is now dead */
-#define FSCACHE_OP_DEC_READ_CNT	7	/* decrement object->n_reads on destruction */
-#define FSCACHE_OP_KEEP_FLAGS	0xc0	/* flags to keep when repurposing an op */
-
-	atomic_t		usage;
-	unsigned		debug_id;	/* debugging ID */
-
-	/* operation processor callback
-	 * - can be NULL if FSCACHE_OP_WAITING is going to be used to perform
-	 *   the op in a non-pool thread */
-	fscache_operation_processor_t processor;
-
-	/* operation releaser */
-	fscache_operation_release_t release;
-};
-
-extern atomic_t fscache_op_debug_id;
-extern void fscache_op_work_func(struct work_struct *work);
-
-extern void fscache_enqueue_operation(struct fscache_operation *);
-extern void fscache_put_operation(struct fscache_operation *);
-
-/**
- * fscache_operation_init - Do basic initialisation of an operation
- * @op: The operation to initialise
- * @release: The release function to assign
- *
- * Do basic initialisation of an operation.  The caller must still set flags,
- * object and processor if needed.
- */
-static inline void fscache_operation_init(struct fscache_operation *op,
-					fscache_operation_processor_t processor,
-					fscache_operation_release_t release)
-{
-	INIT_WORK(&op->work, fscache_op_work_func);
-	atomic_set(&op->usage, 1);
-	op->debug_id = atomic_inc_return(&fscache_op_debug_id);
-	op->processor = processor;
-	op->release = release;
-	INIT_LIST_HEAD(&op->pend_link);
-}
-
-/*
- * data read operation
- */
-struct fscache_retrieval {
-	struct fscache_operation op;
-	struct address_space	*mapping;	/* netfs pages */
-	fscache_rw_complete_t	end_io_func;	/* function to call on I/O completion */
-	void			*context;	/* netfs read context (pinned) */
-	struct list_head	to_do;		/* list of things to be done by the backend */
-	unsigned long		start_time;	/* time at which retrieval started */
-};
-
-typedef int (*fscache_page_retrieval_func_t)(struct fscache_retrieval *op,
-					     struct page *page,
-					     gfp_t gfp);
-
-typedef int (*fscache_pages_retrieval_func_t)(struct fscache_retrieval *op,
-					      struct list_head *pages,
-					      unsigned *nr_pages,
-					      gfp_t gfp);
-
-/**
- * fscache_get_retrieval - Get an extra reference on a retrieval operation
- * @op: The retrieval operation to get a reference on
- *
- * Get an extra reference on a retrieval operation.
- */
-static inline
-struct fscache_retrieval *fscache_get_retrieval(struct fscache_retrieval *op)
-{
-	atomic_inc(&op->op.usage);
-	return op;
-}
-
-/**
- * fscache_enqueue_retrieval - Enqueue a retrieval operation for processing
- * @op: The retrieval operation affected
- *
- * Enqueue a retrieval operation for processing by the FS-Cache thread pool.
- */
-static inline void fscache_enqueue_retrieval(struct fscache_retrieval *op)
-{
-	fscache_enqueue_operation(&op->op);
-}
-
-/**
- * fscache_put_retrieval - Drop a reference to a retrieval operation
- * @op: The retrieval operation affected
- *
- * Drop a reference to a retrieval operation.
- */
-static inline void fscache_put_retrieval(struct fscache_retrieval *op)
-{
-	fscache_put_operation(&op->op);
-}
-
-/*
- * cached page storage work item
- * - used to do three things:
- *   - batch writes to the cache
- *   - do cache writes asynchronously
- *   - defer writes until cache object lookup completion
- */
-struct fscache_storage {
-	struct fscache_operation op;
-	pgoff_t			store_limit;	/* don't write more than this */
-};
-
-/*
- * cache operations
- */
-struct fscache_cache_ops {
-	/* name of cache provider */
-	const char *name;
-
-	/* allocate an object record for a cookie */
-	struct fscache_object *(*alloc_object)(struct fscache_cache *cache,
-					       struct fscache_cookie *cookie);
-
-	/* look up the object for a cookie
-	 * - return -ETIMEDOUT to be requeued
-	 */
-	int (*lookup_object)(struct fscache_object *object);
-
-	/* finished looking up */
-	void (*lookup_complete)(struct fscache_object *object);
-
-	/* increment the usage count on this object (may fail if unmounting) */
-	struct fscache_object *(*grab_object)(struct fscache_object *object);
-
-	/* pin an object in the cache */
-	int (*pin_object)(struct fscache_object *object);
-
-	/* unpin an object in the cache */
-	void (*unpin_object)(struct fscache_object *object);
-
-	/* store the updated auxiliary data on an object */
-	void (*update_object)(struct fscache_object *object);
-
-	/* discard the resources pinned by an object and effect retirement if
-	 * necessary */
-	void (*drop_object)(struct fscache_object *object);
-
-	/* dispose of a reference to an object */
-	void (*put_object)(struct fscache_object *object);
-
-	/* sync a cache */
-	void (*sync_cache)(struct fscache_cache *cache);
-
-	/* notification that the attributes of a non-index object (such as
-	 * i_size) have changed */
-	int (*attr_changed)(struct fscache_object *object);
-
-	/* reserve space for an object's data and associated metadata */
-	int (*reserve_space)(struct fscache_object *object, loff_t i_size);
-
-	/* request a backing block for a page be read or allocated in the
-	 * cache */
-	fscache_page_retrieval_func_t read_or_alloc_page;
-
-	/* request backing blocks for a list of pages be read or allocated in
-	 * the cache */
-	fscache_pages_retrieval_func_t read_or_alloc_pages;
-
-	/* request a backing block for a page be allocated in the cache so that
-	 * it can be written directly */
-	fscache_page_retrieval_func_t allocate_page;
-
-	/* request backing blocks for pages be allocated in the cache so that
-	 * they can be written directly */
-	fscache_pages_retrieval_func_t allocate_pages;
-
-	/* write a page to its backing block in the cache */
-	int (*write_page)(struct fscache_storage *op, struct page *page);
-
-	/* detach backing block from a page (optional)
-	 * - must release the cookie lock before returning
-	 * - may sleep
-	 */
-	void (*uncache_page)(struct fscache_object *object,
-			     struct page *page);
-
-	/* dissociate a cache from all the pages it was backing */
-	void (*dissociate_pages)(struct fscache_cache *cache);
-};
-
-/*
- * data file or index object cookie
- * - a file will only appear in one cache
- * - a request to cache a file may or may not be honoured, subject to
- *   constraints such as disk space
- * - indices are created on disk just-in-time
- */
-struct fscache_cookie {
-	atomic_t			usage;		/* number of users of this cookie */
-	atomic_t			n_children;	/* number of children of this cookie */
-	spinlock_t			lock;
-	spinlock_t			stores_lock;	/* lock on page store tree */
-	struct hlist_head		backing_objects; /* object(s) backing this file/index */
-	const struct fscache_cookie_def	*def;		/* definition */
-	struct fscache_cookie		*parent;	/* parent of this entry */
-	void				*netfs_data;	/* back pointer to netfs */
-	struct radix_tree_root		stores;		/* pages to be stored on this cookie */
-#define FSCACHE_COOKIE_PENDING_TAG	0		/* pages tag: pending write to cache */
-#define FSCACHE_COOKIE_STORING_TAG	1		/* pages tag: writing to cache */
-
-	unsigned long			flags;
-#define FSCACHE_COOKIE_LOOKING_UP	0	/* T if non-index cookie being looked up still */
-#define FSCACHE_COOKIE_CREATING		1	/* T if non-index object being created still */
-#define FSCACHE_COOKIE_NO_DATA_YET	2	/* T if new object with no cached data yet */
-#define FSCACHE_COOKIE_PENDING_FILL	3	/* T if pending initial fill on object */
-#define FSCACHE_COOKIE_FILLING		4	/* T if filling object incrementally */
-#define FSCACHE_COOKIE_UNAVAILABLE	5	/* T if cookie is unavailable (error, etc) */
-};
-
-extern struct fscache_cookie fscache_fsdef_index;
-
-/*
- * on-disk cache file or index handle
- */
-struct fscache_object {
-	enum fscache_object_state {
-		FSCACHE_OBJECT_INIT,		/* object in initial unbound state */
-		FSCACHE_OBJECT_LOOKING_UP,	/* looking up object */
-		FSCACHE_OBJECT_CREATING,	/* creating object */
-
-		/* active states */
-		FSCACHE_OBJECT_AVAILABLE,	/* cleaning up object after creation */
-		FSCACHE_OBJECT_ACTIVE,		/* object is usable */
-		FSCACHE_OBJECT_UPDATING,	/* object is updating */
-
-		/* terminal states */
-		FSCACHE_OBJECT_DYING,		/* object waiting for accessors to finish */
-		FSCACHE_OBJECT_LC_DYING,	/* object cleaning up after lookup/create */
-		FSCACHE_OBJECT_ABORT_INIT,	/* abort the init state */
-		FSCACHE_OBJECT_RELEASING,	/* releasing object */
-		FSCACHE_OBJECT_RECYCLING,	/* retiring object */
-		FSCACHE_OBJECT_WITHDRAWING,	/* withdrawing object */
-		FSCACHE_OBJECT_DEAD,		/* object is now dead */
-		FSCACHE_OBJECT__NSTATES
-	} state;
-
-	int			debug_id;	/* debugging ID */
-	int			n_children;	/* number of child objects */
-	int			n_ops;		/* number of ops outstanding on object */
-	int			n_obj_ops;	/* number of object ops outstanding on object */
-	int			n_in_progress;	/* number of ops in progress */
-	int			n_exclusive;	/* number of exclusive ops queued */
-	atomic_t		n_reads;	/* number of read ops in progress */
-	spinlock_t		lock;		/* state and operations lock */
-
-	unsigned long		lookup_jif;	/* time at which lookup started */
-	unsigned long		event_mask;	/* events this object is interested in */
-	unsigned long		events;		/* events to be processed by this object
-						 * (order is important - using fls) */
-#define FSCACHE_OBJECT_EV_REQUEUE	0	/* T if object should be requeued */
-#define FSCACHE_OBJECT_EV_UPDATE	1	/* T if object should be updated */
-#define FSCACHE_OBJECT_EV_CLEARED	2	/* T if accessors all gone */
-#define FSCACHE_OBJECT_EV_ERROR		3	/* T if fatal error occurred during processing */
-#define FSCACHE_OBJECT_EV_RELEASE	4	/* T if netfs requested object release */
-#define FSCACHE_OBJECT_EV_RETIRE	5	/* T if netfs requested object retirement */
-#define FSCACHE_OBJECT_EV_WITHDRAW	6	/* T if cache requested object withdrawal */
-#define FSCACHE_OBJECT_EVENTS_MASK	0x7f	/* mask of all events*/
-
-	unsigned long		flags;
-#define FSCACHE_OBJECT_LOCK		0	/* T if object is busy being processed */
-#define FSCACHE_OBJECT_PENDING_WRITE	1	/* T if object has pending write */
-#define FSCACHE_OBJECT_WAITING		2	/* T if object is waiting on its parent */
-
-	struct list_head	cache_link;	/* link in cache->object_list */
-	struct hlist_node	cookie_link;	/* link in cookie->backing_objects */
-	struct fscache_cache	*cache;		/* cache that supplied this object */
-	struct fscache_cookie	*cookie;	/* netfs's file/index object */
-	struct fscache_object	*parent;	/* parent object */
-	struct work_struct	work;		/* attention scheduling record */
-	struct list_head	dependents;	/* FIFO of dependent objects */
-	struct list_head	dep_link;	/* link in parent's dependents list */
-	struct list_head	pending_ops;	/* unstarted operations on this object */
-#ifdef CONFIG_FSCACHE_OBJECT_LIST
-	struct rb_node		objlist_link;	/* link in global object list */
-#endif
-	pgoff_t			store_limit;	/* current storage limit */
-	loff_t			store_limit_l;	/* current storage limit */
-};
-
-extern const char *fscache_object_states[];
-
-#define fscache_object_is_active(obj)			      \
-	(!test_bit(FSCACHE_IOERROR, &(obj)->cache->flags) &&  \
-	 (obj)->state >= FSCACHE_OBJECT_AVAILABLE &&	      \
-	 (obj)->state < FSCACHE_OBJECT_DYING)
-
-#define fscache_object_is_dead(obj)				\
-	(test_bit(FSCACHE_IOERROR, &(obj)->cache->flags) &&	\
-	 (obj)->state >= FSCACHE_OBJECT_DYING)
-
-extern void fscache_object_work_func(struct work_struct *work);
-
-/**
- * fscache_object_init - Initialise a cache object description
- * @object: Object description
- *
- * Initialise a cache object description to its basic values.
- *
- * See Documentation/filesystems/caching/backend-api.txt for a complete
- * description.
- */
-static inline
-void fscache_object_init(struct fscache_object *object,
-			 struct fscache_cookie *cookie,
-			 struct fscache_cache *cache)
-{
-	atomic_inc(&cache->object_count);
-
-	object->state = FSCACHE_OBJECT_INIT;
-	spin_lock_init(&object->lock);
-	INIT_LIST_HEAD(&object->cache_link);
-	INIT_HLIST_NODE(&object->cookie_link);
-	INIT_WORK(&object->work, fscache_object_work_func);
-	INIT_LIST_HEAD(&object->dependents);
-	INIT_LIST_HEAD(&object->dep_link);
-	INIT_LIST_HEAD(&object->pending_ops);
-	object->n_children = 0;
-	object->n_ops = object->n_in_progress = object->n_exclusive = 0;
-	object->events = object->event_mask = 0;
-	object->flags = 0;
-	object->store_limit = 0;
-	object->store_limit_l = 0;
-	object->cache = cache;
-	object->cookie = cookie;
-	object->parent = NULL;
-}
-
-extern void fscache_object_lookup_negative(struct fscache_object *object);
-extern void fscache_obtained_object(struct fscache_object *object);
-
-#ifdef CONFIG_FSCACHE_OBJECT_LIST
-extern void fscache_object_destroy(struct fscache_object *object);
-#else
-#define fscache_object_destroy(object) do {} while(0)
-#endif
-
-/**
- * fscache_object_destroyed - Note destruction of an object in a cache
- * @cache: The cache from which the object came
- *
- * Note the destruction and deallocation of an object record in a cache.
- */
-static inline void fscache_object_destroyed(struct fscache_cache *cache)
-{
-	if (atomic_dec_and_test(&cache->object_count))
-		wake_up_all(&fscache_cache_cleared_wq);
-}
-
-/**
- * fscache_object_lookup_error - Note an object encountered an error
- * @object: The object on which the error was encountered
- *
- * Note that an object encountered a fatal error (usually an I/O error) and
- * that it should be withdrawn as soon as possible.
- */
-static inline void fscache_object_lookup_error(struct fscache_object *object)
-{
-	set_bit(FSCACHE_OBJECT_EV_ERROR, &object->events);
-}
-
-/**
- * fscache_set_store_limit - Set the maximum size to be stored in an object
- * @object: The object to set the maximum on
- * @i_size: The limit to set in bytes
- *
- * Set the maximum size an object is permitted to reach, implying the highest
- * byte that may be written.  Intended to be called by the attr_changed() op.
- *
- * See Documentation/filesystems/caching/backend-api.txt for a complete
- * description.
- */
-static inline
-void fscache_set_store_limit(struct fscache_object *object, loff_t i_size)
-{
-	object->store_limit_l = i_size;
-	object->store_limit = i_size >> PAGE_SHIFT;
-	if (i_size & ~PAGE_MASK)
-		object->store_limit++;
-}
-
-/**
- * fscache_end_io - End a retrieval operation on a page
- * @op: The FS-Cache operation covering the retrieval
- * @page: The page that was to be fetched
- * @error: The error code (0 if successful)
- *
- * Note the end of an operation to retrieve a page, as covered by a particular
- * operation record.
- */
-static inline void fscache_end_io(struct fscache_retrieval *op,
-				  struct page *page, int error)
-{
-	op->end_io_func(page, op->context, error);
-}
-
-/*
- * out-of-line cache backend functions
- */
-extern __printf(3, 4)
-void fscache_init_cache(struct fscache_cache *cache,
-			const struct fscache_cache_ops *ops,
-			const char *idfmt, ...);
-
-extern int fscache_add_cache(struct fscache_cache *cache,
-			     struct fscache_object *fsdef,
-			     const char *tagname);
-extern void fscache_withdraw_cache(struct fscache_cache *cache);
-
-extern void fscache_io_error(struct fscache_cache *cache);
-
-extern void fscache_mark_pages_cached(struct fscache_retrieval *op,
-				      struct pagevec *pagevec);
-
-extern bool fscache_object_sleep_till_congested(signed long *timeoutp);
-
-extern enum fscache_checkaux fscache_check_aux(struct fscache_object *object,
-					       const void *data,
-					       uint16_t datalen);
-
-#endif /* _LINUX_FSCACHE_CACHE_H */
diff --git a/ANDROID_3.4.5/include/linux/fscache.h b/ANDROID_3.4.5/include/linux/fscache.h
deleted file mode 100644
index 9ec20dec..00000000
--- a/ANDROID_3.4.5/include/linux/fscache.h
+++ /dev/null
@@ -1,667 +0,0 @@
-/* General filesystem caching interface
- *
- * Copyright (C) 2004-2007 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- *
- * NOTE!!! See:
- *
- *	Documentation/filesystems/caching/netfs-api.txt
- *
- * for a description of the network filesystem interface declared here.
- */
-
-#ifndef _LINUX_FSCACHE_H
-#define _LINUX_FSCACHE_H
-
-#include <linux/fs.h>
-#include <linux/list.h>
-#include <linux/pagemap.h>
-#include <linux/pagevec.h>
-
-#if defined(CONFIG_FSCACHE) || defined(CONFIG_FSCACHE_MODULE)
-#define fscache_available() (1)
-#define fscache_cookie_valid(cookie) (cookie)
-#else
-#define fscache_available() (0)
-#define fscache_cookie_valid(cookie) (0)
-#endif
-
-
-/*
- * overload PG_private_2 to give us PG_fscache - this is used to indicate that
- * a page is currently backed by a local disk cache
- */
-#define PageFsCache(page)		PagePrivate2((page))
-#define SetPageFsCache(page)		SetPagePrivate2((page))
-#define ClearPageFsCache(page)		ClearPagePrivate2((page))
-#define TestSetPageFsCache(page)	TestSetPagePrivate2((page))
-#define TestClearPageFsCache(page)	TestClearPagePrivate2((page))
-
-/* pattern used to fill dead space in an index entry */
-#define FSCACHE_INDEX_DEADFILL_PATTERN 0x79
-
-struct pagevec;
-struct fscache_cache_tag;
-struct fscache_cookie;
-struct fscache_netfs;
-
-typedef void (*fscache_rw_complete_t)(struct page *page,
-				      void *context,
-				      int error);
-
-/* result of index entry consultation */
-enum fscache_checkaux {
-	FSCACHE_CHECKAUX_OKAY,		/* entry okay as is */
-	FSCACHE_CHECKAUX_NEEDS_UPDATE,	/* entry requires update */
-	FSCACHE_CHECKAUX_OBSOLETE,	/* entry requires deletion */
-};
-
-/*
- * fscache cookie definition
- */
-struct fscache_cookie_def {
-	/* name of cookie type */
-	char name[16];
-
-	/* cookie type */
-	uint8_t type;
-#define FSCACHE_COOKIE_TYPE_INDEX	0
-#define FSCACHE_COOKIE_TYPE_DATAFILE	1
-
-	/* select the cache into which to insert an entry in this index
-	 * - optional
-	 * - should return a cache identifier or NULL to cause the cache to be
-	 *   inherited from the parent if possible or the first cache picked
-	 *   for a non-index file if not
-	 */
-	struct fscache_cache_tag *(*select_cache)(
-		const void *parent_netfs_data,
-		const void *cookie_netfs_data);
-
-	/* get an index key
-	 * - should store the key data in the buffer
-	 * - should return the amount of data stored
-	 * - not permitted to return an error
-	 * - the netfs data from the cookie being used as the source is
-	 *   presented
-	 */
-	uint16_t (*get_key)(const void *cookie_netfs_data,
-			    void *buffer,
-			    uint16_t bufmax);
-
-	/* get certain file attributes from the netfs data
-	 * - this function can be absent for an index
-	 * - not permitted to return an error
-	 * - the netfs data from the cookie being used as the source is
-	 *   presented
-	 */
-	void (*get_attr)(const void *cookie_netfs_data, uint64_t *size);
-
-	/* get the auxiliary data from netfs data
-	 * - this function can be absent if the index carries no state data
-	 * - should store the auxiliary data in the buffer
-	 * - should return the amount of amount stored
-	 * - not permitted to return an error
-	 * - the netfs data from the cookie being used as the source is
-	 *   presented
-	 */
-	uint16_t (*get_aux)(const void *cookie_netfs_data,
-			    void *buffer,
-			    uint16_t bufmax);
-
-	/* consult the netfs about the state of an object
-	 * - this function can be absent if the index carries no state data
-	 * - the netfs data from the cookie being used as the target is
-	 *   presented, as is the auxiliary data
-	 */
-	enum fscache_checkaux (*check_aux)(void *cookie_netfs_data,
-					   const void *data,
-					   uint16_t datalen);
-
-	/* get an extra reference on a read context
-	 * - this function can be absent if the completion function doesn't
-	 *   require a context
-	 */
-	void (*get_context)(void *cookie_netfs_data, void *context);
-
-	/* release an extra reference on a read context
-	 * - this function can be absent if the completion function doesn't
-	 *   require a context
-	 */
-	void (*put_context)(void *cookie_netfs_data, void *context);
-
-	/* indicate pages that now have cache metadata retained
-	 * - this function should mark the specified pages as now being cached
-	 * - the pages will have been marked with PG_fscache before this is
-	 *   called, so this is optional
-	 */
-	void (*mark_pages_cached)(void *cookie_netfs_data,
-				  struct address_space *mapping,
-				  struct pagevec *cached_pvec);
-
-	/* indicate the cookie is no longer cached
-	 * - this function is called when the backing store currently caching
-	 *   a cookie is removed
-	 * - the netfs should use this to clean up any markers indicating
-	 *   cached pages
-	 * - this is mandatory for any object that may have data
-	 */
-	void (*now_uncached)(void *cookie_netfs_data);
-};
-
-/*
- * fscache cached network filesystem type
- * - name, version and ops must be filled in before registration
- * - all other fields will be set during registration
- */
-struct fscache_netfs {
-	uint32_t			version;	/* indexing version */
-	const char			*name;		/* filesystem name */
-	struct fscache_cookie		*primary_index;
-	struct list_head		link;		/* internal link */
-};
-
-/*
- * slow-path functions for when there is actually caching available, and the
- * netfs does actually have a valid token
- * - these are not to be called directly
- * - these are undefined symbols when FS-Cache is not configured and the
- *   optimiser takes care of not using them
- */
-extern int __fscache_register_netfs(struct fscache_netfs *);
-extern void __fscache_unregister_netfs(struct fscache_netfs *);
-extern struct fscache_cache_tag *__fscache_lookup_cache_tag(const char *);
-extern void __fscache_release_cache_tag(struct fscache_cache_tag *);
-
-extern struct fscache_cookie *__fscache_acquire_cookie(
-	struct fscache_cookie *,
-	const struct fscache_cookie_def *,
-	void *);
-extern void __fscache_relinquish_cookie(struct fscache_cookie *, int);
-extern void __fscache_update_cookie(struct fscache_cookie *);
-extern int __fscache_attr_changed(struct fscache_cookie *);
-extern int __fscache_read_or_alloc_page(struct fscache_cookie *,
-					struct page *,
-					fscache_rw_complete_t,
-					void *,
-					gfp_t);
-extern int __fscache_read_or_alloc_pages(struct fscache_cookie *,
-					 struct address_space *,
-					 struct list_head *,
-					 unsigned *,
-					 fscache_rw_complete_t,
-					 void *,
-					 gfp_t);
-extern int __fscache_alloc_page(struct fscache_cookie *, struct page *, gfp_t);
-extern int __fscache_write_page(struct fscache_cookie *, struct page *, gfp_t);
-extern void __fscache_uncache_page(struct fscache_cookie *, struct page *);
-extern bool __fscache_check_page_write(struct fscache_cookie *, struct page *);
-extern void __fscache_wait_on_page_write(struct fscache_cookie *, struct page *);
-extern bool __fscache_maybe_release_page(struct fscache_cookie *, struct page *,
-					 gfp_t);
-extern void __fscache_uncache_all_inode_pages(struct fscache_cookie *,
-					      struct inode *);
-
-/**
- * fscache_register_netfs - Register a filesystem as desiring caching services
- * @netfs: The description of the filesystem
- *
- * Register a filesystem as desiring caching services if they're available.
- *
- * See Documentation/filesystems/caching/netfs-api.txt for a complete
- * description.
- */
-static inline
-int fscache_register_netfs(struct fscache_netfs *netfs)
-{
-	if (fscache_available())
-		return __fscache_register_netfs(netfs);
-	else
-		return 0;
-}
-
-/**
- * fscache_unregister_netfs - Indicate that a filesystem no longer desires
- * caching services
- * @netfs: The description of the filesystem
- *
- * Indicate that a filesystem no longer desires caching services for the
- * moment.
- *
- * See Documentation/filesystems/caching/netfs-api.txt for a complete
- * description.
- */
-static inline
-void fscache_unregister_netfs(struct fscache_netfs *netfs)
-{
-	if (fscache_available())
-		__fscache_unregister_netfs(netfs);
-}
-
-/**
- * fscache_lookup_cache_tag - Look up a cache tag
- * @name: The name of the tag to search for
- *
- * Acquire a specific cache referral tag that can be used to select a specific
- * cache in which to cache an index.
- *
- * See Documentation/filesystems/caching/netfs-api.txt for a complete
- * description.
- */
-static inline
-struct fscache_cache_tag *fscache_lookup_cache_tag(const char *name)
-{
-	if (fscache_available())
-		return __fscache_lookup_cache_tag(name);
-	else
-		return NULL;
-}
-
-/**
- * fscache_release_cache_tag - Release a cache tag
- * @tag: The tag to release
- *
- * Release a reference to a cache referral tag previously looked up.
- *
- * See Documentation/filesystems/caching/netfs-api.txt for a complete
- * description.
- */
-static inline
-void fscache_release_cache_tag(struct fscache_cache_tag *tag)
-{
-	if (fscache_available())
-		__fscache_release_cache_tag(tag);
-}
-
-/**
- * fscache_acquire_cookie - Acquire a cookie to represent a cache object
- * @parent: The cookie that's to be the parent of this one
- * @def: A description of the cache object, including callback operations
- * @netfs_data: An arbitrary piece of data to be kept in the cookie to
- * represent the cache object to the netfs
- *
- * This function is used to inform FS-Cache about part of an index hierarchy
- * that can be used to locate files.  This is done by requesting a cookie for
- * each index in the path to the file.
- *
- * See Documentation/filesystems/caching/netfs-api.txt for a complete
- * description.
- */
-static inline
-struct fscache_cookie *fscache_acquire_cookie(
-	struct fscache_cookie *parent,
-	const struct fscache_cookie_def *def,
-	void *netfs_data)
-{
-	if (fscache_cookie_valid(parent))
-		return __fscache_acquire_cookie(parent, def, netfs_data);
-	else
-		return NULL;
-}
-
-/**
- * fscache_relinquish_cookie - Return the cookie to the cache, maybe discarding
- * it
- * @cookie: The cookie being returned
- * @retire: True if the cache object the cookie represents is to be discarded
- *
- * This function returns a cookie to the cache, forcibly discarding the
- * associated cache object if retire is set to true.
- *
- * See Documentation/filesystems/caching/netfs-api.txt for a complete
- * description.
- */
-static inline
-void fscache_relinquish_cookie(struct fscache_cookie *cookie, int retire)
-{
-	if (fscache_cookie_valid(cookie))
-		__fscache_relinquish_cookie(cookie, retire);
-}
-
-/**
- * fscache_update_cookie - Request that a cache object be updated
- * @cookie: The cookie representing the cache object
- *
- * Request an update of the index data for the cache object associated with the
- * cookie.
- *
- * See Documentation/filesystems/caching/netfs-api.txt for a complete
- * description.
- */
-static inline
-void fscache_update_cookie(struct fscache_cookie *cookie)
-{
-	if (fscache_cookie_valid(cookie))
-		__fscache_update_cookie(cookie);
-}
-
-/**
- * fscache_pin_cookie - Pin a data-storage cache object in its cache
- * @cookie: The cookie representing the cache object
- *
- * Permit data-storage cache objects to be pinned in the cache.
- *
- * See Documentation/filesystems/caching/netfs-api.txt for a complete
- * description.
- */
-static inline
-int fscache_pin_cookie(struct fscache_cookie *cookie)
-{
-	return -ENOBUFS;
-}
-
-/**
- * fscache_pin_cookie - Unpin a data-storage cache object in its cache
- * @cookie: The cookie representing the cache object
- *
- * Permit data-storage cache objects to be unpinned from the cache.
- *
- * See Documentation/filesystems/caching/netfs-api.txt for a complete
- * description.
- */
-static inline
-void fscache_unpin_cookie(struct fscache_cookie *cookie)
-{
-}
-
-/**
- * fscache_attr_changed - Notify cache that an object's attributes changed
- * @cookie: The cookie representing the cache object
- *
- * Send a notification to the cache indicating that an object's attributes have
- * changed.  This includes the data size.  These attributes will be obtained
- * through the get_attr() cookie definition op.
- *
- * See Documentation/filesystems/caching/netfs-api.txt for a complete
- * description.
- */
-static inline
-int fscache_attr_changed(struct fscache_cookie *cookie)
-{
-	if (fscache_cookie_valid(cookie))
-		return __fscache_attr_changed(cookie);
-	else
-		return -ENOBUFS;
-}
-
-/**
- * fscache_reserve_space - Reserve data space for a cached object
- * @cookie: The cookie representing the cache object
- * @i_size: The amount of space to be reserved
- *
- * Reserve an amount of space in the cache for the cache object attached to a
- * cookie so that a write to that object within the space can always be
- * honoured.
- *
- * See Documentation/filesystems/caching/netfs-api.txt for a complete
- * description.
- */
-static inline
-int fscache_reserve_space(struct fscache_cookie *cookie, loff_t size)
-{
-	return -ENOBUFS;
-}
-
-/**
- * fscache_read_or_alloc_page - Read a page from the cache or allocate a block
- * in which to store it
- * @cookie: The cookie representing the cache object
- * @page: The netfs page to fill if possible
- * @end_io_func: The callback to invoke when and if the page is filled
- * @context: An arbitrary piece of data to pass on to end_io_func()
- * @gfp: The conditions under which memory allocation should be made
- *
- * Read a page from the cache, or if that's not possible make a potential
- * one-block reservation in the cache into which the page may be stored once
- * fetched from the server.
- *
- * If the page is not backed by the cache object, or if it there's some reason
- * it can't be, -ENOBUFS will be returned and nothing more will be done for
- * that page.
- *
- * Else, if that page is backed by the cache, a read will be initiated directly
- * to the netfs's page and 0 will be returned by this function.  The
- * end_io_func() callback will be invoked when the operation terminates on a
- * completion or failure.  Note that the callback may be invoked before the
- * return.
- *
- * Else, if the page is unbacked, -ENODATA is returned and a block may have
- * been allocated in the cache.
- *
- * See Documentation/filesystems/caching/netfs-api.txt for a complete
- * description.
- */
-static inline
-int fscache_read_or_alloc_page(struct fscache_cookie *cookie,
-			       struct page *page,
-			       fscache_rw_complete_t end_io_func,
-			       void *context,
-			       gfp_t gfp)
-{
-	if (fscache_cookie_valid(cookie))
-		return __fscache_read_or_alloc_page(cookie, page, end_io_func,
-						    context, gfp);
-	else
-		return -ENOBUFS;
-}
-
-/**
- * fscache_read_or_alloc_pages - Read pages from the cache and/or allocate
- * blocks in which to store them
- * @cookie: The cookie representing the cache object
- * @mapping: The netfs inode mapping to which the pages will be attached
- * @pages: A list of potential netfs pages to be filled
- * @nr_pages: Number of pages to be read and/or allocated
- * @end_io_func: The callback to invoke when and if each page is filled
- * @context: An arbitrary piece of data to pass on to end_io_func()
- * @gfp: The conditions under which memory allocation should be made
- *
- * Read a set of pages from the cache, or if that's not possible, attempt to
- * make a potential one-block reservation for each page in the cache into which
- * that page may be stored once fetched from the server.
- *
- * If some pages are not backed by the cache object, or if it there's some
- * reason they can't be, -ENOBUFS will be returned and nothing more will be
- * done for that pages.
- *
- * Else, if some of the pages are backed by the cache, a read will be initiated
- * directly to the netfs's page and 0 will be returned by this function.  The
- * end_io_func() callback will be invoked when the operation terminates on a
- * completion or failure.  Note that the callback may be invoked before the
- * return.
- *
- * Else, if a page is unbacked, -ENODATA is returned and a block may have
- * been allocated in the cache.
- *
- * Because the function may want to return all of -ENOBUFS, -ENODATA and 0 in
- * regard to different pages, the return values are prioritised in that order.
- * Any pages submitted for reading are removed from the pages list.
- *
- * See Documentation/filesystems/caching/netfs-api.txt for a complete
- * description.
- */
-static inline
-int fscache_read_or_alloc_pages(struct fscache_cookie *cookie,
-				struct address_space *mapping,
-				struct list_head *pages,
-				unsigned *nr_pages,
-				fscache_rw_complete_t end_io_func,
-				void *context,
-				gfp_t gfp)
-{
-	if (fscache_cookie_valid(cookie))
-		return __fscache_read_or_alloc_pages(cookie, mapping, pages,
-						     nr_pages, end_io_func,
-						     context, gfp);
-	else
-		return -ENOBUFS;
-}
-
-/**
- * fscache_alloc_page - Allocate a block in which to store a page
- * @cookie: The cookie representing the cache object
- * @page: The netfs page to allocate a page for
- * @gfp: The conditions under which memory allocation should be made
- *
- * Request Allocation a block in the cache in which to store a netfs page
- * without retrieving any contents from the cache.
- *
- * If the page is not backed by a file then -ENOBUFS will be returned and
- * nothing more will be done, and no reservation will be made.
- *
- * Else, a block will be allocated if one wasn't already, and 0 will be
- * returned
- *
- * See Documentation/filesystems/caching/netfs-api.txt for a complete
- * description.
- */
-static inline
-int fscache_alloc_page(struct fscache_cookie *cookie,
-		       struct page *page,
-		       gfp_t gfp)
-{
-	if (fscache_cookie_valid(cookie))
-		return __fscache_alloc_page(cookie, page, gfp);
-	else
-		return -ENOBUFS;
-}
-
-/**
- * fscache_write_page - Request storage of a page in the cache
- * @cookie: The cookie representing the cache object
- * @page: The netfs page to store
- * @gfp: The conditions under which memory allocation should be made
- *
- * Request the contents of the netfs page be written into the cache.  This
- * request may be ignored if no cache block is currently allocated, in which
- * case it will return -ENOBUFS.
- *
- * If a cache block was already allocated, a write will be initiated and 0 will
- * be returned.  The PG_fscache_write page bit is set immediately and will then
- * be cleared at the completion of the write to indicate the success or failure
- * of the operation.  Note that the completion may happen before the return.
- *
- * See Documentation/filesystems/caching/netfs-api.txt for a complete
- * description.
- */
-static inline
-int fscache_write_page(struct fscache_cookie *cookie,
-		       struct page *page,
-		       gfp_t gfp)
-{
-	if (fscache_cookie_valid(cookie))
-		return __fscache_write_page(cookie, page, gfp);
-	else
-		return -ENOBUFS;
-}
-
-/**
- * fscache_uncache_page - Indicate that caching is no longer required on a page
- * @cookie: The cookie representing the cache object
- * @page: The netfs page that was being cached.
- *
- * Tell the cache that we no longer want a page to be cached and that it should
- * remove any knowledge of the netfs page it may have.
- *
- * Note that this cannot cancel any outstanding I/O operations between this
- * page and the cache.
- *
- * See Documentation/filesystems/caching/netfs-api.txt for a complete
- * description.
- */
-static inline
-void fscache_uncache_page(struct fscache_cookie *cookie,
-			  struct page *page)
-{
-	if (fscache_cookie_valid(cookie))
-		__fscache_uncache_page(cookie, page);
-}
-
-/**
- * fscache_check_page_write - Ask if a page is being writing to the cache
- * @cookie: The cookie representing the cache object
- * @page: The netfs page that is being cached.
- *
- * Ask the cache if a page is being written to the cache.
- *
- * See Documentation/filesystems/caching/netfs-api.txt for a complete
- * description.
- */
-static inline
-bool fscache_check_page_write(struct fscache_cookie *cookie,
-			      struct page *page)
-{
-	if (fscache_cookie_valid(cookie))
-		return __fscache_check_page_write(cookie, page);
-	return false;
-}
-
-/**
- * fscache_wait_on_page_write - Wait for a page to complete writing to the cache
- * @cookie: The cookie representing the cache object
- * @page: The netfs page that is being cached.
- *
- * Ask the cache to wake us up when a page is no longer being written to the
- * cache.
- *
- * See Documentation/filesystems/caching/netfs-api.txt for a complete
- * description.
- */
-static inline
-void fscache_wait_on_page_write(struct fscache_cookie *cookie,
-				struct page *page)
-{
-	if (fscache_cookie_valid(cookie))
-		__fscache_wait_on_page_write(cookie, page);
-}
-
-/**
- * fscache_maybe_release_page - Consider releasing a page, cancelling a store
- * @cookie: The cookie representing the cache object
- * @page: The netfs page that is being cached.
- * @gfp: The gfp flags passed to releasepage()
- *
- * Consider releasing a page for the vmscan algorithm, on behalf of the netfs's
- * releasepage() call.  A storage request on the page may cancelled if it is
- * not currently being processed.
- *
- * The function returns true if the page no longer has a storage request on it,
- * and false if a storage request is left in place.  If true is returned, the
- * page will have been passed to fscache_uncache_page().  If false is returned
- * the page cannot be freed yet.
- */
-static inline
-bool fscache_maybe_release_page(struct fscache_cookie *cookie,
-				struct page *page,
-				gfp_t gfp)
-{
-	if (fscache_cookie_valid(cookie) && PageFsCache(page))
-		return __fscache_maybe_release_page(cookie, page, gfp);
-	return false;
-}
-
-/**
- * fscache_uncache_all_inode_pages - Uncache all an inode's pages
- * @cookie: The cookie representing the inode's cache object.
- * @inode: The inode to uncache pages from.
- *
- * Uncache all the pages in an inode that are marked PG_fscache, assuming them
- * to be associated with the given cookie.
- *
- * This function may sleep.  It will wait for pages that are being written out
- * and will wait whilst the PG_fscache mark is removed by the cache.
- */
-static inline
-void fscache_uncache_all_inode_pages(struct fscache_cookie *cookie,
-				     struct inode *inode)
-{
-	if (fscache_cookie_valid(cookie))
-		__fscache_uncache_all_inode_pages(cookie, inode);
-}
-
-#endif /* _LINUX_FSCACHE_H */
diff --git a/ANDROID_3.4.5/include/linux/fsl-diu-fb.h b/ANDROID_3.4.5/include/linux/fsl-diu-fb.h
deleted file mode 100644
index 11c16a1f..00000000
--- a/ANDROID_3.4.5/include/linux/fsl-diu-fb.h
+++ /dev/null
@@ -1,164 +0,0 @@
-/*
- * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- *  Freescale DIU Frame Buffer device driver
- *
- *  Authors: Hongjun Chen <hong-jun.chen@freescale.com>
- *           Paul Widmer <paul.widmer@freescale.com>
- *           Srikanth Srinivasan <srikanth.srinivasan@freescale.com>
- *           York Sun <yorksun@freescale.com>
- *
- *   Based on imxfb.c Copyright (C) 2004 S.Hauer, Pengutronix
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-
-#ifndef __FSL_DIU_FB_H__
-#define __FSL_DIU_FB_H__
-
-#include <linux/types.h>
-
-struct mfb_chroma_key {
-	int enable;
-	__u8  red_max;
-	__u8  green_max;
-	__u8  blue_max;
-	__u8  red_min;
-	__u8  green_min;
-	__u8  blue_min;
-};
-
-struct aoi_display_offset {
-	__s32 x_aoi_d;
-	__s32 y_aoi_d;
-};
-
-#define MFB_SET_CHROMA_KEY	_IOW('M', 1, struct mfb_chroma_key)
-#define MFB_SET_BRIGHTNESS	_IOW('M', 3, __u8)
-#define MFB_SET_ALPHA		_IOW('M', 0, __u8)
-#define MFB_GET_ALPHA		_IOR('M', 0, __u8)
-#define MFB_SET_AOID		_IOW('M', 4, struct aoi_display_offset)
-#define MFB_GET_AOID		_IOR('M', 4, struct aoi_display_offset)
-#define MFB_SET_PIXFMT		_IOW('M', 8, __u32)
-#define MFB_GET_PIXFMT		_IOR('M', 8, __u32)
-
-/*
- * The original definitions of MFB_SET_PIXFMT and MFB_GET_PIXFMT used the
- * wrong value for 'size' field of the ioctl.  The current macros above use the
- * right size, but we still need to provide backwards compatibility, at least
- * for a while.
-*/
-#define MFB_SET_PIXFMT_OLD	0x80014d08
-#define MFB_GET_PIXFMT_OLD	0x40014d08
-
-#ifdef __KERNEL__
-
-/*
- * These are the fields of area descriptor(in DDR memory) for every plane
- */
-struct diu_ad {
-	/* Word 0(32-bit) in DDR memory */
-/* 	__u16 comp; */
-/* 	__u16 pixel_s:2; */
-/* 	__u16 pallete:1; */
-/* 	__u16 red_c:2; */
-/* 	__u16 green_c:2; */
-/* 	__u16 blue_c:2; */
-/* 	__u16 alpha_c:3; */
-/* 	__u16 byte_f:1; */
-/* 	__u16 res0:3; */
-
-	__be32 pix_fmt; /* hard coding pixel format */
-
-	/* Word 1(32-bit) in DDR memory */
-	__le32 addr;
-
-	/* Word 2(32-bit) in DDR memory */
-/* 	__u32 delta_xs:11; */
-/* 	__u32 res1:1; */
-/* 	__u32 delta_ys:11; */
-/* 	__u32 res2:1; */
-/* 	__u32 g_alpha:8; */
-	__le32 src_size_g_alpha;
-
-	/* Word 3(32-bit) in DDR memory */
-/* 	__u32 delta_xi:11; */
-/* 	__u32 res3:5; */
-/* 	__u32 delta_yi:11; */
-/* 	__u32 res4:3; */
-/* 	__u32 flip:2; */
-	__le32 aoi_size;
-
-	/* Word 4(32-bit) in DDR memory */
-	/*__u32 offset_xi:11;
-	__u32 res5:5;
-	__u32 offset_yi:11;
-	__u32 res6:5;
-	*/
-	__le32 offset_xyi;
-
-	/* Word 5(32-bit) in DDR memory */
-	/*__u32 offset_xd:11;
-	__u32 res7:5;
-	__u32 offset_yd:11;
-	__u32 res8:5; */
-	__le32 offset_xyd;
-
-
-	/* Word 6(32-bit) in DDR memory */
-	__u8 ckmax_r;
-	__u8 ckmax_g;
-	__u8 ckmax_b;
-	__u8 res9;
-
-	/* Word 7(32-bit) in DDR memory */
-	__u8 ckmin_r;
-	__u8 ckmin_g;
-	__u8 ckmin_b;
-	__u8 res10;
-/* 	__u32 res10:8; */
-
-	/* Word 8(32-bit) in DDR memory */
-	__le32 next_ad;
-
-	/* Word 9(32-bit) in DDR memory, just for 64-bit aligned */
-	__u32 paddr;
-} __attribute__ ((packed));
-
-/* DIU register map */
-struct diu {
-	__be32 desc[3];
-	__be32 gamma;
-	__be32 pallete;
-	__be32 cursor;
-	__be32 curs_pos;
-	__be32 diu_mode;
-	__be32 bgnd;
-	__be32 bgnd_wb;
-	__be32 disp_size;
-	__be32 wb_size;
-	__be32 wb_mem_addr;
-	__be32 hsyn_para;
-	__be32 vsyn_para;
-	__be32 syn_pol;
-	__be32 thresholds;
-	__be32 int_status;
-	__be32 int_mask;
-	__be32 colorbar[8];
-	__be32 filling;
-	__be32 plut;
-} __attribute__ ((packed));
-
-/*
- * Modes of operation of DIU.  The DIU supports five different modes, but
- * the driver only supports modes 0 and 1.
- */
-#define MFB_MODE0	0	/* DIU off */
-#define MFB_MODE1	1	/* All three planes output to display */
-
-#endif /* __KERNEL__ */
-#endif /* __FSL_DIU_FB_H__ */
diff --git a/ANDROID_3.4.5/include/linux/fsl/mxs-dma.h b/ANDROID_3.4.5/include/linux/fsl/mxs-dma.h
deleted file mode 100644
index 203d7c4a..00000000
--- a/ANDROID_3.4.5/include/linux/fsl/mxs-dma.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __MACH_MXS_DMA_H__
-#define __MACH_MXS_DMA_H__
-
-#include <linux/dmaengine.h>
-
-struct mxs_dma_data {
-	int chan_irq;
-};
-
-static inline int mxs_dma_is_apbh(struct dma_chan *chan)
-{
-	return !strcmp(dev_name(chan->device->dev), "mxs-dma-apbh");
-}
-
-static inline int mxs_dma_is_apbx(struct dma_chan *chan)
-{
-	return !strcmp(dev_name(chan->device->dev), "mxs-dma-apbx");
-}
-
-#endif /* __MACH_MXS_DMA_H__ */
diff --git a/ANDROID_3.4.5/include/linux/fsl_devices.h b/ANDROID_3.4.5/include/linux/fsl_devices.h
deleted file mode 100644
index fffdf00f..00000000
--- a/ANDROID_3.4.5/include/linux/fsl_devices.h
+++ /dev/null
@@ -1,138 +0,0 @@
-/*
- * include/linux/fsl_devices.h
- *
- * Definitions for any platform device related flags or structures for
- * Freescale processor devices
- *
- * Maintainer: Kumar Gala <galak@kernel.crashing.org>
- *
- * Copyright 2004 Freescale Semiconductor, Inc
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#ifndef _FSL_DEVICE_H_
-#define _FSL_DEVICE_H_
-
-#include <linux/types.h>
-
-/*
- * Some conventions on how we handle peripherals on Freescale chips
- *
- * unique device: a platform_device entry in fsl_plat_devs[] plus
- * associated device information in its platform_data structure.
- *
- * A chip is described by a set of unique devices.
- *
- * Each sub-arch has its own master list of unique devices and
- * enumerates them by enum fsl_devices in a sub-arch specific header
- *
- * The platform data structure is broken into two parts.  The
- * first is device specific information that help identify any
- * unique features of a peripheral.  The second is any
- * information that may be defined by the board or how the device
- * is connected externally of the chip.
- *
- * naming conventions:
- * - platform data structures: <driver>_platform_data
- * - platform data device flags: FSL_<driver>_DEV_<FLAG>
- * - platform data board flags: FSL_<driver>_BRD_<FLAG>
- *
- */
-
-enum fsl_usb2_operating_modes {
-	FSL_USB2_MPH_HOST,
-	FSL_USB2_DR_HOST,
-	FSL_USB2_DR_DEVICE,
-	FSL_USB2_DR_OTG,
-};
-
-enum fsl_usb2_phy_modes {
-	FSL_USB2_PHY_NONE,
-	FSL_USB2_PHY_ULPI,
-	FSL_USB2_PHY_UTMI,
-	FSL_USB2_PHY_UTMI_WIDE,
-	FSL_USB2_PHY_SERIAL,
-};
-
-struct clk;
-struct platform_device;
-
-struct fsl_usb2_platform_data {
-	/* board specific information */
-	enum fsl_usb2_operating_modes	operating_mode;
-	enum fsl_usb2_phy_modes		phy_mode;
-	unsigned int			port_enables;
-	unsigned int			workaround;
-
-	int		(*init)(struct platform_device *);
-	void		(*exit)(struct platform_device *);
-	void __iomem	*regs;		/* ioremap'd register base */
-	struct clk	*clk;
-	unsigned	power_budget;	/* hcd->power_budget */
-	unsigned	big_endian_mmio:1;
-	unsigned	big_endian_desc:1;
-	unsigned	es:1;		/* need USBMODE:ES */
-	unsigned	le_setup_buf:1;
-	unsigned	have_sysif_regs:1;
-	unsigned	invert_drvvbus:1;
-	unsigned	invert_pwr_fault:1;
-
-	unsigned	suspended:1;
-	unsigned	already_suspended:1;
-
-	/* register save area for suspend/resume */
-	u32		pm_command;
-	u32		pm_status;
-	u32		pm_intr_enable;
-	u32		pm_frame_index;
-	u32		pm_segment;
-	u32		pm_frame_list;
-	u32		pm_async_next;
-	u32		pm_configured_flag;
-	u32		pm_portsc;
-	u32		pm_usbgenctrl;
-};
-
-/* Flags in fsl_usb2_mph_platform_data */
-#define FSL_USB2_PORT0_ENABLED	0x00000001
-#define FSL_USB2_PORT1_ENABLED	0x00000002
-
-#define FLS_USB2_WORKAROUND_ENGCM09152	(1 << 0)
-
-struct spi_device;
-
-struct fsl_spi_platform_data {
-	u32 	initial_spmode;	/* initial SPMODE value */
-	s16	bus_num;
-	unsigned int flags;
-#define SPI_QE_CPU_MODE		(1 << 0) /* QE CPU ("PIO") mode */
-#define SPI_CPM_MODE		(1 << 1) /* CPM/QE ("DMA") mode */
-#define SPI_CPM1		(1 << 2) /* SPI unit is in CPM1 block */
-#define SPI_CPM2		(1 << 3) /* SPI unit is in CPM2 block */
-#define SPI_QE			(1 << 4) /* SPI unit is in QE block */
-	/* board specific information */
-	u16	max_chipselect;
-	void	(*cs_control)(struct spi_device *spi, bool on);
-	u32	sysclk;
-};
-
-struct mpc8xx_pcmcia_ops {
-	void(*hw_ctrl)(int slot, int enable);
-	int(*voltage_set)(int slot, int vcc, int vpp);
-};
-
-/* Returns non-zero if the current suspend operation would
- * lead to a deep sleep (i.e. power removed from the core,
- * instead of just the clock).
- */
-#if defined(CONFIG_PPC_83xx) && defined(CONFIG_SUSPEND)
-int fsl_deep_sleep(void);
-#else
-static inline int fsl_deep_sleep(void) { return 0; }
-#endif
-
-#endif /* _FSL_DEVICE_H_ */
diff --git a/ANDROID_3.4.5/include/linux/fsl_hypervisor.h b/ANDROID_3.4.5/include/linux/fsl_hypervisor.h
deleted file mode 100644
index 1cebaeee..00000000
--- a/ANDROID_3.4.5/include/linux/fsl_hypervisor.h
+++ /dev/null
@@ -1,241 +0,0 @@
-/*
- * Freescale hypervisor ioctl and kernel interface
- *
- * Copyright (C) 2008-2011 Freescale Semiconductor, Inc.
- * Author: Timur Tabi <timur@freescale.com>
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * This software is provided by Freescale Semiconductor "as is" and any
- * express or implied warranties, including, but not limited to, the implied
- * warranties of merchantability and fitness for a particular purpose are
- * disclaimed. In no event shall Freescale Semiconductor be liable for any
- * direct, indirect, incidental, special, exemplary, or consequential damages
- * (including, but not limited to, procurement of substitute goods or services;
- * loss of use, data, or profits; or business interruption) however caused and
- * on any theory of liability, whether in contract, strict liability, or tort
- * (including negligence or otherwise) arising in any way out of the use of this
- * software, even if advised of the possibility of such damage.
- *
- * This file is used by the Freescale hypervisor management driver.  It can
- * also be included by applications that need to communicate with the driver
- * via the ioctl interface.
- */
-
-#ifndef FSL_HYPERVISOR_H
-#define FSL_HYPERVISOR_H
-
-#include <linux/types.h>
-
-/**
- * struct fsl_hv_ioctl_restart - restart a partition
- * @ret: return error code from the hypervisor
- * @partition: the ID of the partition to restart, or -1 for the
- *             calling partition
- *
- * Used by FSL_HV_IOCTL_PARTITION_RESTART
- */
-struct fsl_hv_ioctl_restart {
-	__u32 ret;
-	__u32 partition;
-};
-
-/**
- * struct fsl_hv_ioctl_status - get a partition's status
- * @ret: return error code from the hypervisor
- * @partition: the ID of the partition to query, or -1 for the
- *             calling partition
- * @status: The returned status of the partition
- *
- * Used by FSL_HV_IOCTL_PARTITION_GET_STATUS
- *
- * Values of 'status':
- *    0 = Stopped
- *    1 = Running
- *    2 = Starting
- *    3 = Stopping
- */
-struct fsl_hv_ioctl_status {
-	__u32 ret;
-	__u32 partition;
-	__u32 status;
-};
-
-/**
- * struct fsl_hv_ioctl_start - start a partition
- * @ret: return error code from the hypervisor
- * @partition: the ID of the partition to control
- * @entry_point: The offset within the guest IMA to start execution
- * @load: If non-zero, reload the partition's images before starting
- *
- * Used by FSL_HV_IOCTL_PARTITION_START
- */
-struct fsl_hv_ioctl_start {
-	__u32 ret;
-	__u32 partition;
-	__u32 entry_point;
-	__u32 load;
-};
-
-/**
- * struct fsl_hv_ioctl_stop - stop a partition
- * @ret: return error code from the hypervisor
- * @partition: the ID of the partition to stop, or -1 for the calling
- *             partition
- *
- * Used by FSL_HV_IOCTL_PARTITION_STOP
- */
-struct fsl_hv_ioctl_stop {
-	__u32 ret;
-	__u32 partition;
-};
-
-/**
- * struct fsl_hv_ioctl_memcpy - copy memory between partitions
- * @ret: return error code from the hypervisor
- * @source: the partition ID of the source partition, or -1 for this
- *          partition
- * @target: the partition ID of the target partition, or -1 for this
- *          partition
- * @reserved: reserved, must be set to 0
- * @local_addr: user-space virtual address of a buffer in the local
- *              partition
- * @remote_addr: guest physical address of a buffer in the
- *           remote partition
- * @count: the number of bytes to copy.  Both the local and remote
- *         buffers must be at least 'count' bytes long
- *
- * Used by FSL_HV_IOCTL_MEMCPY
- *
- * The 'local' partition is the partition that calls this ioctl.  The
- * 'remote' partition is a different partition.  The data is copied from
- * the 'source' paritition' to the 'target' partition.
- *
- * The buffer in the remote partition must be guest physically
- * contiguous.
- *
- * This ioctl does not support copying memory between two remote
- * partitions or within the same partition, so either 'source' or
- * 'target' (but not both) must be -1.  In other words, either
- *
- *      source == local and target == remote
- * or
- *      source == remote and target == local
- */
-struct fsl_hv_ioctl_memcpy {
-	__u32 ret;
-	__u32 source;
-	__u32 target;
-	__u32 reserved;	/* padding to ensure local_vaddr is aligned */
-	__u64 local_vaddr;
-	__u64 remote_paddr;
-	__u64 count;
-};
-
-/**
- * struct fsl_hv_ioctl_doorbell - ring a doorbell
- * @ret: return error code from the hypervisor
- * @doorbell: the handle of the doorbell to ring doorbell
- *
- * Used by FSL_HV_IOCTL_DOORBELL
- */
-struct fsl_hv_ioctl_doorbell {
-	__u32 ret;
-	__u32 doorbell;
-};
-
-/**
- * struct fsl_hv_ioctl_prop - get/set a device tree property
- * @ret: return error code from the hypervisor
- * @handle: handle of partition whose tree to access
- * @path: virtual address of path name of node to access
- * @propname: virtual address of name of property to access
- * @propval: virtual address of property data buffer
- * @proplen: Size of property data buffer
- * @reserved: reserved, must be set to 0
- *
- * Used by FSL_HV_IOCTL_DOORBELL
- */
-struct fsl_hv_ioctl_prop {
-	__u32 ret;
-	__u32 handle;
-	__u64 path;
-	__u64 propname;
-	__u64 propval;
-	__u32 proplen;
-	__u32 reserved;	/* padding to ensure structure is aligned */
-};
-
-/* The ioctl type, documented in ioctl-number.txt */
-#define FSL_HV_IOCTL_TYPE	0xAF
-
-/* Restart another partition */
-#define FSL_HV_IOCTL_PARTITION_RESTART \
-	_IOWR(FSL_HV_IOCTL_TYPE, 1, struct fsl_hv_ioctl_restart)
-
-/* Get a partition's status */
-#define FSL_HV_IOCTL_PARTITION_GET_STATUS \
-	_IOWR(FSL_HV_IOCTL_TYPE, 2, struct fsl_hv_ioctl_status)
-
-/* Boot another partition */
-#define FSL_HV_IOCTL_PARTITION_START \
-	_IOWR(FSL_HV_IOCTL_TYPE, 3, struct fsl_hv_ioctl_start)
-
-/* Stop this or another partition */
-#define FSL_HV_IOCTL_PARTITION_STOP \
-	_IOWR(FSL_HV_IOCTL_TYPE, 4, struct fsl_hv_ioctl_stop)
-
-/* Copy data from one partition to another */
-#define FSL_HV_IOCTL_MEMCPY \
-	_IOWR(FSL_HV_IOCTL_TYPE, 5, struct fsl_hv_ioctl_memcpy)
-
-/* Ring a doorbell */
-#define FSL_HV_IOCTL_DOORBELL \
-	_IOWR(FSL_HV_IOCTL_TYPE, 6, struct fsl_hv_ioctl_doorbell)
-
-/* Get a property from another guest's device tree */
-#define FSL_HV_IOCTL_GETPROP \
-	_IOWR(FSL_HV_IOCTL_TYPE, 7, struct fsl_hv_ioctl_prop)
-
-/* Set a property in another guest's device tree */
-#define FSL_HV_IOCTL_SETPROP \
-	_IOWR(FSL_HV_IOCTL_TYPE, 8, struct fsl_hv_ioctl_prop)
-
-#ifdef __KERNEL__
-
-/**
- * fsl_hv_event_register() - register a callback for failover events
- * @nb: pointer to caller-supplied notifier_block structure
- *
- * This function is called by device drivers to register their callback
- * functions for fail-over events.
- *
- * The caller should allocate a notifier_block object and initialize the
- * 'priority' and 'notifier_call' fields.
- */
-int fsl_hv_failover_register(struct notifier_block *nb);
-
-/**
- * fsl_hv_event_unregister() - unregister a callback for failover events
- * @nb: the same 'nb' used in previous fsl_hv_failover_register call
- */
-int fsl_hv_failover_unregister(struct notifier_block *nb);
-
-#endif
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/fsnotify.h b/ANDROID_3.4.5/include/linux/fsnotify.h
deleted file mode 100644
index a6dfe694..00000000
--- a/ANDROID_3.4.5/include/linux/fsnotify.h
+++ /dev/null
@@ -1,342 +0,0 @@
-#ifndef _LINUX_FS_NOTIFY_H
-#define _LINUX_FS_NOTIFY_H
-
-/*
- * include/linux/fsnotify.h - generic hooks for filesystem notification, to
- * reduce in-source duplication from both dnotify and inotify.
- *
- * We don't compile any of this away in some complicated menagerie of ifdefs.
- * Instead, we rely on the code inside to optimize away as needed.
- *
- * (C) Copyright 2005 Robert Love
- */
-
-#include <linux/fsnotify_backend.h>
-#include <linux/audit.h>
-#include <linux/slab.h>
-#include <linux/bug.h>
-
-/*
- * fsnotify_d_instantiate - instantiate a dentry for inode
- */
-static inline void fsnotify_d_instantiate(struct dentry *dentry,
-					  struct inode *inode)
-{
-	__fsnotify_d_instantiate(dentry, inode);
-}
-
-/* Notify this dentry's parent about a child's events. */
-static inline int fsnotify_parent(struct path *path, struct dentry *dentry, __u32 mask)
-{
-	if (!dentry)
-		dentry = path->dentry;
-
-	return __fsnotify_parent(path, dentry, mask);
-}
-
-/* simple call site for access decisions */
-static inline int fsnotify_perm(struct file *file, int mask)
-{
-	struct path *path = &file->f_path;
-	struct inode *inode = path->dentry->d_inode;
-	__u32 fsnotify_mask = 0;
-	int ret;
-
-	if (file->f_mode & FMODE_NONOTIFY)
-		return 0;
-	if (!(mask & (MAY_READ | MAY_OPEN)))
-		return 0;
-	if (mask & MAY_OPEN)
-		fsnotify_mask = FS_OPEN_PERM;
-	else if (mask & MAY_READ)
-		fsnotify_mask = FS_ACCESS_PERM;
-	else
-		BUG();
-
-	ret = fsnotify_parent(path, NULL, fsnotify_mask);
-	if (ret)
-		return ret;
-
-	return fsnotify(inode, fsnotify_mask, path, FSNOTIFY_EVENT_PATH, NULL, 0);
-}
-
-/*
- * fsnotify_d_move - dentry has been moved
- */
-static inline void fsnotify_d_move(struct dentry *dentry)
-{
-	/*
-	 * On move we need to update dentry->d_flags to indicate if the new parent
-	 * cares about events from this dentry.
-	 */
-	__fsnotify_update_dcache_flags(dentry);
-}
-
-/*
- * fsnotify_link_count - inode's link count changed
- */
-static inline void fsnotify_link_count(struct inode *inode)
-{
-	fsnotify(inode, FS_ATTRIB, inode, FSNOTIFY_EVENT_INODE, NULL, 0);
-}
-
-/*
- * fsnotify_move - file old_name at old_dir was moved to new_name at new_dir
- */
-static inline void fsnotify_move(struct inode *old_dir, struct inode *new_dir,
-				 const unsigned char *old_name,
-				 int isdir, struct inode *target, struct dentry *moved)
-{
-	struct inode *source = moved->d_inode;
-	u32 fs_cookie = fsnotify_get_cookie();
-	__u32 old_dir_mask = (FS_EVENT_ON_CHILD | FS_MOVED_FROM);
-	__u32 new_dir_mask = (FS_EVENT_ON_CHILD | FS_MOVED_TO);
-	const unsigned char *new_name = moved->d_name.name;
-
-	if (old_dir == new_dir)
-		old_dir_mask |= FS_DN_RENAME;
-
-	if (isdir) {
-		old_dir_mask |= FS_ISDIR;
-		new_dir_mask |= FS_ISDIR;
-	}
-
-	fsnotify(old_dir, old_dir_mask, old_dir, FSNOTIFY_EVENT_INODE, old_name, fs_cookie);
-	fsnotify(new_dir, new_dir_mask, new_dir, FSNOTIFY_EVENT_INODE, new_name, fs_cookie);
-
-	if (target)
-		fsnotify_link_count(target);
-
-	if (source)
-		fsnotify(source, FS_MOVE_SELF, moved->d_inode, FSNOTIFY_EVENT_INODE, NULL, 0);
-	audit_inode_child(moved, new_dir);
-}
-
-/*
- * fsnotify_inode_delete - and inode is being evicted from cache, clean up is needed
- */
-static inline void fsnotify_inode_delete(struct inode *inode)
-{
-	__fsnotify_inode_delete(inode);
-}
-
-/*
- * fsnotify_vfsmount_delete - a vfsmount is being destroyed, clean up is needed
- */
-static inline void fsnotify_vfsmount_delete(struct vfsmount *mnt)
-{
-	__fsnotify_vfsmount_delete(mnt);
-}
-
-/*
- * fsnotify_nameremove - a filename was removed from a directory
- */
-static inline void fsnotify_nameremove(struct dentry *dentry, int isdir)
-{
-	__u32 mask = FS_DELETE;
-
-	if (isdir)
-		mask |= FS_ISDIR;
-
-	fsnotify_parent(NULL, dentry, mask);
-}
-
-/*
- * fsnotify_inoderemove - an inode is going away
- */
-static inline void fsnotify_inoderemove(struct inode *inode)
-{
-	fsnotify(inode, FS_DELETE_SELF, inode, FSNOTIFY_EVENT_INODE, NULL, 0);
-	__fsnotify_inode_delete(inode);
-}
-
-/*
- * fsnotify_create - 'name' was linked in
- */
-static inline void fsnotify_create(struct inode *inode, struct dentry *dentry)
-{
-	audit_inode_child(dentry, inode);
-
-	fsnotify(inode, FS_CREATE, dentry->d_inode, FSNOTIFY_EVENT_INODE, dentry->d_name.name, 0);
-}
-
-/*
- * fsnotify_link - new hardlink in 'inode' directory
- * Note: We have to pass also the linked inode ptr as some filesystems leave
- *   new_dentry->d_inode NULL and instantiate inode pointer later
- */
-static inline void fsnotify_link(struct inode *dir, struct inode *inode, struct dentry *new_dentry)
-{
-	fsnotify_link_count(inode);
-	audit_inode_child(new_dentry, dir);
-
-	fsnotify(dir, FS_CREATE, inode, FSNOTIFY_EVENT_INODE, new_dentry->d_name.name, 0);
-}
-
-/*
- * fsnotify_mkdir - directory 'name' was created
- */
-static inline void fsnotify_mkdir(struct inode *inode, struct dentry *dentry)
-{
-	__u32 mask = (FS_CREATE | FS_ISDIR);
-	struct inode *d_inode = dentry->d_inode;
-
-	audit_inode_child(dentry, inode);
-
-	fsnotify(inode, mask, d_inode, FSNOTIFY_EVENT_INODE, dentry->d_name.name, 0);
-}
-
-/*
- * fsnotify_access - file was read
- */
-static inline void fsnotify_access(struct file *file)
-{
-	struct path *path = &file->f_path;
-	struct inode *inode = path->dentry->d_inode;
-	__u32 mask = FS_ACCESS;
-
-	if (S_ISDIR(inode->i_mode))
-		mask |= FS_ISDIR;
-
-	if (!(file->f_mode & FMODE_NONOTIFY)) {
-		fsnotify_parent(path, NULL, mask);
-		fsnotify(inode, mask, path, FSNOTIFY_EVENT_PATH, NULL, 0);
-	}
-}
-
-/*
- * fsnotify_modify - file was modified
- */
-static inline void fsnotify_modify(struct file *file)
-{
-	struct path *path = &file->f_path;
-	struct inode *inode = path->dentry->d_inode;
-	__u32 mask = FS_MODIFY;
-
-	if (S_ISDIR(inode->i_mode))
-		mask |= FS_ISDIR;
-
-	if (!(file->f_mode & FMODE_NONOTIFY)) {
-		fsnotify_parent(path, NULL, mask);
-		fsnotify(inode, mask, path, FSNOTIFY_EVENT_PATH, NULL, 0);
-	}
-}
-
-/*
- * fsnotify_open - file was opened
- */
-static inline void fsnotify_open(struct file *file)
-{
-	struct path *path = &file->f_path;
-	struct inode *inode = path->dentry->d_inode;
-	__u32 mask = FS_OPEN;
-
-	if (S_ISDIR(inode->i_mode))
-		mask |= FS_ISDIR;
-
-	fsnotify_parent(path, NULL, mask);
-	fsnotify(inode, mask, path, FSNOTIFY_EVENT_PATH, NULL, 0);
-}
-
-/*
- * fsnotify_close - file was closed
- */
-static inline void fsnotify_close(struct file *file)
-{
-	struct path *path = &file->f_path;
-	struct inode *inode = file->f_path.dentry->d_inode;
-	fmode_t mode = file->f_mode;
-	__u32 mask = (mode & FMODE_WRITE) ? FS_CLOSE_WRITE : FS_CLOSE_NOWRITE;
-
-	if (S_ISDIR(inode->i_mode))
-		mask |= FS_ISDIR;
-
-	if (!(file->f_mode & FMODE_NONOTIFY)) {
-		fsnotify_parent(path, NULL, mask);
-		fsnotify(inode, mask, path, FSNOTIFY_EVENT_PATH, NULL, 0);
-	}
-}
-
-/*
- * fsnotify_xattr - extended attributes were changed
- */
-static inline void fsnotify_xattr(struct dentry *dentry)
-{
-	struct inode *inode = dentry->d_inode;
-	__u32 mask = FS_ATTRIB;
-
-	if (S_ISDIR(inode->i_mode))
-		mask |= FS_ISDIR;
-
-	fsnotify_parent(NULL, dentry, mask);
-	fsnotify(inode, mask, inode, FSNOTIFY_EVENT_INODE, NULL, 0);
-}
-
-/*
- * fsnotify_change - notify_change event.  file was modified and/or metadata
- * was changed.
- */
-static inline void fsnotify_change(struct dentry *dentry, unsigned int ia_valid)
-{
-	struct inode *inode = dentry->d_inode;
-	__u32 mask = 0;
-
-	if (ia_valid & ATTR_UID)
-		mask |= FS_ATTRIB;
-	if (ia_valid & ATTR_GID)
-		mask |= FS_ATTRIB;
-	if (ia_valid & ATTR_SIZE)
-		mask |= FS_MODIFY;
-
-	/* both times implies a utime(s) call */
-	if ((ia_valid & (ATTR_ATIME | ATTR_MTIME)) == (ATTR_ATIME | ATTR_MTIME))
-		mask |= FS_ATTRIB;
-	else if (ia_valid & ATTR_ATIME)
-		mask |= FS_ACCESS;
-	else if (ia_valid & ATTR_MTIME)
-		mask |= FS_MODIFY;
-
-	if (ia_valid & ATTR_MODE)
-		mask |= FS_ATTRIB;
-
-	if (mask) {
-		if (S_ISDIR(inode->i_mode))
-			mask |= FS_ISDIR;
-
-		fsnotify_parent(NULL, dentry, mask);
-		fsnotify(inode, mask, inode, FSNOTIFY_EVENT_INODE, NULL, 0);
-	}
-}
-
-#if defined(CONFIG_FSNOTIFY)	/* notify helpers */
-
-/*
- * fsnotify_oldname_init - save off the old filename before we change it
- */
-static inline const unsigned char *fsnotify_oldname_init(const unsigned char *name)
-{
-	return kstrdup(name, GFP_KERNEL);
-}
-
-/*
- * fsnotify_oldname_free - free the name we got from fsnotify_oldname_init
- */
-static inline void fsnotify_oldname_free(const unsigned char *old_name)
-{
-	kfree(old_name);
-}
-
-#else	/* CONFIG_FSNOTIFY */
-
-static inline const char *fsnotify_oldname_init(const unsigned char *name)
-{
-	return NULL;
-}
-
-static inline void fsnotify_oldname_free(const unsigned char *old_name)
-{
-}
-
-#endif	/*  CONFIG_FSNOTIFY */
-
-#endif	/* _LINUX_FS_NOTIFY_H */
diff --git a/ANDROID_3.4.5/include/linux/fsnotify_backend.h b/ANDROID_3.4.5/include/linux/fsnotify_backend.h
deleted file mode 100644
index 91d0e0a3..00000000
--- a/ANDROID_3.4.5/include/linux/fsnotify_backend.h
+++ /dev/null
@@ -1,470 +0,0 @@
-/*
- * Filesystem access notification for Linux
- *
- *  Copyright (C) 2008 Red Hat, Inc., Eric Paris <eparis@redhat.com>
- */
-
-#ifndef __LINUX_FSNOTIFY_BACKEND_H
-#define __LINUX_FSNOTIFY_BACKEND_H
-
-#ifdef __KERNEL__
-
-#include <linux/idr.h> /* inotify uses this */
-#include <linux/fs.h> /* struct inode */
-#include <linux/list.h>
-#include <linux/path.h> /* struct path */
-#include <linux/spinlock.h>
-#include <linux/types.h>
-
-#include <linux/atomic.h>
-
-/*
- * IN_* from inotfy.h lines up EXACTLY with FS_*, this is so we can easily
- * convert between them.  dnotify only needs conversion at watch creation
- * so no perf loss there.  fanotify isn't defined yet, so it can use the
- * wholes if it needs more events.
- */
-#define FS_ACCESS		0x00000001	/* File was accessed */
-#define FS_MODIFY		0x00000002	/* File was modified */
-#define FS_ATTRIB		0x00000004	/* Metadata changed */
-#define FS_CLOSE_WRITE		0x00000008	/* Writtable file was closed */
-#define FS_CLOSE_NOWRITE	0x00000010	/* Unwrittable file closed */
-#define FS_OPEN			0x00000020	/* File was opened */
-#define FS_MOVED_FROM		0x00000040	/* File was moved from X */
-#define FS_MOVED_TO		0x00000080	/* File was moved to Y */
-#define FS_CREATE		0x00000100	/* Subfile was created */
-#define FS_DELETE		0x00000200	/* Subfile was deleted */
-#define FS_DELETE_SELF		0x00000400	/* Self was deleted */
-#define FS_MOVE_SELF		0x00000800	/* Self was moved */
-
-#define FS_UNMOUNT		0x00002000	/* inode on umount fs */
-#define FS_Q_OVERFLOW		0x00004000	/* Event queued overflowed */
-#define FS_IN_IGNORED		0x00008000	/* last inotify event here */
-
-#define FS_OPEN_PERM		0x00010000	/* open event in an permission hook */
-#define FS_ACCESS_PERM		0x00020000	/* access event in a permissions hook */
-
-#define FS_EXCL_UNLINK		0x04000000	/* do not send events if object is unlinked */
-#define FS_ISDIR		0x40000000	/* event occurred against dir */
-#define FS_IN_ONESHOT		0x80000000	/* only send event once */
-
-#define FS_DN_RENAME		0x10000000	/* file renamed */
-#define FS_DN_MULTISHOT		0x20000000	/* dnotify multishot */
-
-/* This inode cares about things that happen to its children.  Always set for
- * dnotify and inotify. */
-#define FS_EVENT_ON_CHILD	0x08000000
-
-/* This is a list of all events that may get sent to a parernt based on fs event
- * happening to inodes inside that directory */
-#define FS_EVENTS_POSS_ON_CHILD   (FS_ACCESS | FS_MODIFY | FS_ATTRIB |\
-				   FS_CLOSE_WRITE | FS_CLOSE_NOWRITE | FS_OPEN |\
-				   FS_MOVED_FROM | FS_MOVED_TO | FS_CREATE |\
-				   FS_DELETE)
-
-#define FS_MOVE			(FS_MOVED_FROM | FS_MOVED_TO)
-
-#define ALL_FSNOTIFY_PERM_EVENTS (FS_OPEN_PERM | FS_ACCESS_PERM)
-
-#define ALL_FSNOTIFY_EVENTS (FS_ACCESS | FS_MODIFY | FS_ATTRIB | \
-			     FS_CLOSE_WRITE | FS_CLOSE_NOWRITE | FS_OPEN | \
-			     FS_MOVED_FROM | FS_MOVED_TO | FS_CREATE | \
-			     FS_DELETE | FS_DELETE_SELF | FS_MOVE_SELF | \
-			     FS_UNMOUNT | FS_Q_OVERFLOW | FS_IN_IGNORED | \
-			     FS_OPEN_PERM | FS_ACCESS_PERM | FS_EXCL_UNLINK | \
-			     FS_ISDIR | FS_IN_ONESHOT | FS_DN_RENAME | \
-			     FS_DN_MULTISHOT | FS_EVENT_ON_CHILD)
-
-struct fsnotify_group;
-struct fsnotify_event;
-struct fsnotify_mark;
-struct fsnotify_event_private_data;
-
-/*
- * Each group much define these ops.  The fsnotify infrastructure will call
- * these operations for each relevant group.
- *
- * should_send_event - given a group, inode, and mask this function determines
- *		if the group is interested in this event.
- * handle_event - main call for a group to handle an fs event
- * free_group_priv - called when a group refcnt hits 0 to clean up the private union
- * freeing-mark - this means that a mark has been flagged to die when everything
- *		finishes using it.  The function is supplied with what must be a
- *		valid group and inode to use to clean up.
- */
-struct fsnotify_ops {
-	bool (*should_send_event)(struct fsnotify_group *group, struct inode *inode,
-				  struct fsnotify_mark *inode_mark,
-				  struct fsnotify_mark *vfsmount_mark,
-				  __u32 mask, void *data, int data_type);
-	int (*handle_event)(struct fsnotify_group *group,
-			    struct fsnotify_mark *inode_mark,
-			    struct fsnotify_mark *vfsmount_mark,
-			    struct fsnotify_event *event);
-	void (*free_group_priv)(struct fsnotify_group *group);
-	void (*freeing_mark)(struct fsnotify_mark *mark, struct fsnotify_group *group);
-	void (*free_event_priv)(struct fsnotify_event_private_data *priv);
-};
-
-/*
- * A group is a "thing" that wants to receive notification about filesystem
- * events.  The mask holds the subset of event types this group cares about.
- * refcnt on a group is up to the implementor and at any moment if it goes 0
- * everything will be cleaned up.
- */
-struct fsnotify_group {
-	/*
-	 * How the refcnt is used is up to each group.  When the refcnt hits 0
-	 * fsnotify will clean up all of the resources associated with this group.
-	 * As an example, the dnotify group will always have a refcnt=1 and that
-	 * will never change.  Inotify, on the other hand, has a group per
-	 * inotify_init() and the refcnt will hit 0 only when that fd has been
-	 * closed.
-	 */
-	atomic_t refcnt;		/* things with interest in this group */
-
-	const struct fsnotify_ops *ops;	/* how this group handles things */
-
-	/* needed to send notification to userspace */
-	struct mutex notification_mutex;	/* protect the notification_list */
-	struct list_head notification_list;	/* list of event_holder this group needs to send to userspace */
-	wait_queue_head_t notification_waitq;	/* read() on the notification file blocks on this waitq */
-	unsigned int q_len;			/* events on the queue */
-	unsigned int max_events;		/* maximum events allowed on the list */
-	/*
-	 * Valid fsnotify group priorities.  Events are send in order from highest
-	 * priority to lowest priority.  We default to the lowest priority.
-	 */
-	#define FS_PRIO_0	0 /* normal notifiers, no permissions */
-	#define FS_PRIO_1	1 /* fanotify content based access control */
-	#define FS_PRIO_2	2 /* fanotify pre-content access */
-	unsigned int priority;
-
-	/* stores all fastpath marks assoc with this group so they can be cleaned on unregister */
-	spinlock_t mark_lock;		/* protect marks_list */
-	atomic_t num_marks;		/* 1 for each mark and 1 for not being
-					 * past the point of no return when freeing
-					 * a group */
-	struct list_head marks_list;	/* all inode marks for this group */
-
-	/* groups can define private fields here or use the void *private */
-	union {
-		void *private;
-#ifdef CONFIG_INOTIFY_USER
-		struct inotify_group_private_data {
-			spinlock_t	idr_lock;
-			struct idr      idr;
-			u32             last_wd;
-			struct fasync_struct    *fa;    /* async notification */
-			struct user_struct      *user;
-		} inotify_data;
-#endif
-#ifdef CONFIG_FANOTIFY
-		struct fanotify_group_private_data {
-#ifdef CONFIG_FANOTIFY_ACCESS_PERMISSIONS
-			/* allows a group to block waiting for a userspace response */
-			struct mutex access_mutex;
-			struct list_head access_list;
-			wait_queue_head_t access_waitq;
-			atomic_t bypass_perm;
-#endif /* CONFIG_FANOTIFY_ACCESS_PERMISSIONS */
-			int f_flags;
-			unsigned int max_marks;
-			struct user_struct *user;
-		} fanotify_data;
-#endif /* CONFIG_FANOTIFY */
-	};
-};
-
-/*
- * A single event can be queued in multiple group->notification_lists.
- *
- * each group->notification_list will point to an event_holder which in turns points
- * to the actual event that needs to be sent to userspace.
- *
- * Seemed cheaper to create a refcnt'd event and a small holder for every group
- * than create a different event for every group
- *
- */
-struct fsnotify_event_holder {
-	struct fsnotify_event *event;
-	struct list_head event_list;
-};
-
-/*
- * Inotify needs to tack data onto an event.  This struct lets us later find the
- * correct private data of the correct group.
- */
-struct fsnotify_event_private_data {
-	struct fsnotify_group *group;
-	struct list_head event_list;
-};
-
-/*
- * all of the information about the original object we want to now send to
- * a group.  If you want to carry more info from the accessing task to the
- * listener this structure is where you need to be adding fields.
- */
-struct fsnotify_event {
-	/*
-	 * If we create an event we are also likely going to need a holder
-	 * to link to a group.  So embed one holder in the event.  Means only
-	 * one allocation for the common case where we only have one group
-	 */
-	struct fsnotify_event_holder holder;
-	spinlock_t lock;	/* protection for the associated event_holder and private_list */
-	/* to_tell may ONLY be dereferenced during handle_event(). */
-	struct inode *to_tell;	/* either the inode the event happened to or its parent */
-	/*
-	 * depending on the event type we should have either a path or inode
-	 * We hold a reference on path, but NOT on inode.  Since we have the ref on
-	 * the path, it may be dereferenced at any point during this object's
-	 * lifetime.  That reference is dropped when this object's refcnt hits
-	 * 0.  If this event contains an inode instead of a path, the inode may
-	 * ONLY be used during handle_event().
-	 */
-	union {
-		struct path path;
-		struct inode *inode;
-	};
-/* when calling fsnotify tell it if the data is a path or inode */
-#define FSNOTIFY_EVENT_NONE	0
-#define FSNOTIFY_EVENT_PATH	1
-#define FSNOTIFY_EVENT_INODE	2
-	int data_type;		/* which of the above union we have */
-	atomic_t refcnt;	/* how many groups still are using/need to send this event */
-	__u32 mask;		/* the type of access, bitwise OR for FS_* event types */
-
-	u32 sync_cookie;	/* used to corrolate events, namely inotify mv events */
-	const unsigned char *file_name;
-	size_t name_len;
-	struct pid *tgid;
-
-#ifdef CONFIG_FANOTIFY_ACCESS_PERMISSIONS
-	__u32 response;	/* userspace answer to question */
-#endif /* CONFIG_FANOTIFY_ACCESS_PERMISSIONS */
-
-	struct list_head private_data_list;	/* groups can store private data here */
-};
-
-/*
- * Inode specific fields in an fsnotify_mark
- */
-struct fsnotify_inode_mark {
-	struct inode *inode;		/* inode this mark is associated with */
-	struct hlist_node i_list;	/* list of marks by inode->i_fsnotify_marks */
-	struct list_head free_i_list;	/* tmp list used when freeing this mark */
-};
-
-/*
- * Mount point specific fields in an fsnotify_mark
- */
-struct fsnotify_vfsmount_mark {
-	struct vfsmount *mnt;		/* vfsmount this mark is associated with */
-	struct hlist_node m_list;	/* list of marks by inode->i_fsnotify_marks */
-	struct list_head free_m_list;	/* tmp list used when freeing this mark */
-};
-
-/*
- * a mark is simply an object attached to an in core inode which allows an
- * fsnotify listener to indicate they are either no longer interested in events
- * of a type matching mask or only interested in those events.
- *
- * these are flushed when an inode is evicted from core and may be flushed
- * when the inode is modified (as seen by fsnotify_access).  Some fsnotify users
- * (such as dnotify) will flush these when the open fd is closed and not at
- * inode eviction or modification.
- */
-struct fsnotify_mark {
-	__u32 mask;			/* mask this mark is for */
-	/* we hold ref for each i_list and g_list.  also one ref for each 'thing'
-	 * in kernel that found and may be using this mark. */
-	atomic_t refcnt;		/* active things looking at this mark */
-	struct fsnotify_group *group;	/* group this mark is for */
-	struct list_head g_list;	/* list of marks by group->i_fsnotify_marks */
-	spinlock_t lock;		/* protect group and inode */
-	union {
-		struct fsnotify_inode_mark i;
-		struct fsnotify_vfsmount_mark m;
-	};
-	struct list_head free_g_list;	/* tmp list used when freeing this mark */
-	__u32 ignored_mask;		/* events types to ignore */
-#define FSNOTIFY_MARK_FLAG_INODE		0x01
-#define FSNOTIFY_MARK_FLAG_VFSMOUNT		0x02
-#define FSNOTIFY_MARK_FLAG_OBJECT_PINNED	0x04
-#define FSNOTIFY_MARK_FLAG_IGNORED_SURV_MODIFY	0x08
-#define FSNOTIFY_MARK_FLAG_ALIVE		0x10
-	unsigned int flags;		/* vfsmount or inode mark? */
-	struct list_head destroy_list;
-	void (*free_mark)(struct fsnotify_mark *mark); /* called on final put+free */
-};
-
-#ifdef CONFIG_FSNOTIFY
-
-/* called from the vfs helpers */
-
-/* main fsnotify call to send events */
-extern int fsnotify(struct inode *to_tell, __u32 mask, void *data, int data_is,
-		    const unsigned char *name, u32 cookie);
-extern int __fsnotify_parent(struct path *path, struct dentry *dentry, __u32 mask);
-extern void __fsnotify_inode_delete(struct inode *inode);
-extern void __fsnotify_vfsmount_delete(struct vfsmount *mnt);
-extern u32 fsnotify_get_cookie(void);
-
-static inline int fsnotify_inode_watches_children(struct inode *inode)
-{
-	/* FS_EVENT_ON_CHILD is set if the inode may care */
-	if (!(inode->i_fsnotify_mask & FS_EVENT_ON_CHILD))
-		return 0;
-	/* this inode might care about child events, does it care about the
-	 * specific set of events that can happen on a child? */
-	return inode->i_fsnotify_mask & FS_EVENTS_POSS_ON_CHILD;
-}
-
-/*
- * Update the dentry with a flag indicating the interest of its parent to receive
- * filesystem events when those events happens to this dentry->d_inode.
- */
-static inline void __fsnotify_update_dcache_flags(struct dentry *dentry)
-{
-	struct dentry *parent;
-
-	assert_spin_locked(&dentry->d_lock);
-
-	/*
-	 * Serialisation of setting PARENT_WATCHED on the dentries is provided
-	 * by d_lock. If inotify_inode_watched changes after we have taken
-	 * d_lock, the following __fsnotify_update_child_dentry_flags call will
-	 * find our entry, so it will spin until we complete here, and update
-	 * us with the new state.
-	 */
-	parent = dentry->d_parent;
-	if (parent->d_inode && fsnotify_inode_watches_children(parent->d_inode))
-		dentry->d_flags |= DCACHE_FSNOTIFY_PARENT_WATCHED;
-	else
-		dentry->d_flags &= ~DCACHE_FSNOTIFY_PARENT_WATCHED;
-}
-
-/*
- * fsnotify_d_instantiate - instantiate a dentry for inode
- */
-static inline void __fsnotify_d_instantiate(struct dentry *dentry, struct inode *inode)
-{
-	if (!inode)
-		return;
-
-	spin_lock(&dentry->d_lock);
-	__fsnotify_update_dcache_flags(dentry);
-	spin_unlock(&dentry->d_lock);
-}
-
-/* called from fsnotify listeners, such as fanotify or dnotify */
-
-/* get a reference to an existing or create a new group */
-extern struct fsnotify_group *fsnotify_alloc_group(const struct fsnotify_ops *ops);
-/* drop reference on a group from fsnotify_alloc_group */
-extern void fsnotify_put_group(struct fsnotify_group *group);
-
-/* take a reference to an event */
-extern void fsnotify_get_event(struct fsnotify_event *event);
-extern void fsnotify_put_event(struct fsnotify_event *event);
-/* find private data previously attached to an event and unlink it */
-extern struct fsnotify_event_private_data *fsnotify_remove_priv_from_event(struct fsnotify_group *group,
-									   struct fsnotify_event *event);
-
-/* attach the event to the group notification queue */
-extern struct fsnotify_event *fsnotify_add_notify_event(struct fsnotify_group *group,
-							struct fsnotify_event *event,
-							struct fsnotify_event_private_data *priv,
-							struct fsnotify_event *(*merge)(struct list_head *,
-											struct fsnotify_event *));
-/* true if the group notification queue is empty */
-extern bool fsnotify_notify_queue_is_empty(struct fsnotify_group *group);
-/* return, but do not dequeue the first event on the notification queue */
-extern struct fsnotify_event *fsnotify_peek_notify_event(struct fsnotify_group *group);
-/* return AND dequeue the first event on the notification queue */
-extern struct fsnotify_event *fsnotify_remove_notify_event(struct fsnotify_group *group);
-
-/* functions used to manipulate the marks attached to inodes */
-
-/* run all marks associated with a vfsmount and update mnt->mnt_fsnotify_mask */
-extern void fsnotify_recalc_vfsmount_mask(struct vfsmount *mnt);
-/* run all marks associated with an inode and update inode->i_fsnotify_mask */
-extern void fsnotify_recalc_inode_mask(struct inode *inode);
-extern void fsnotify_init_mark(struct fsnotify_mark *mark, void (*free_mark)(struct fsnotify_mark *mark));
-/* find (and take a reference) to a mark associated with group and inode */
-extern struct fsnotify_mark *fsnotify_find_inode_mark(struct fsnotify_group *group, struct inode *inode);
-/* find (and take a reference) to a mark associated with group and vfsmount */
-extern struct fsnotify_mark *fsnotify_find_vfsmount_mark(struct fsnotify_group *group, struct vfsmount *mnt);
-/* copy the values from old into new */
-extern void fsnotify_duplicate_mark(struct fsnotify_mark *new, struct fsnotify_mark *old);
-/* set the ignored_mask of a mark */
-extern void fsnotify_set_mark_ignored_mask_locked(struct fsnotify_mark *mark, __u32 mask);
-/* set the mask of a mark (might pin the object into memory */
-extern void fsnotify_set_mark_mask_locked(struct fsnotify_mark *mark, __u32 mask);
-/* attach the mark to both the group and the inode */
-extern int fsnotify_add_mark(struct fsnotify_mark *mark, struct fsnotify_group *group,
-			     struct inode *inode, struct vfsmount *mnt, int allow_dups);
-/* given a mark, flag it to be freed when all references are dropped */
-extern void fsnotify_destroy_mark(struct fsnotify_mark *mark);
-/* run all the marks in a group, and clear all of the vfsmount marks */
-extern void fsnotify_clear_vfsmount_marks_by_group(struct fsnotify_group *group);
-/* run all the marks in a group, and clear all of the inode marks */
-extern void fsnotify_clear_inode_marks_by_group(struct fsnotify_group *group);
-/* run all the marks in a group, and clear all of the marks where mark->flags & flags is true*/
-extern void fsnotify_clear_marks_by_group_flags(struct fsnotify_group *group, unsigned int flags);
-/* run all the marks in a group, and flag them to be freed */
-extern void fsnotify_clear_marks_by_group(struct fsnotify_group *group);
-extern void fsnotify_get_mark(struct fsnotify_mark *mark);
-extern void fsnotify_put_mark(struct fsnotify_mark *mark);
-extern void fsnotify_unmount_inodes(struct list_head *list);
-
-/* put here because inotify does some weird stuff when destroying watches */
-extern struct fsnotify_event *fsnotify_create_event(struct inode *to_tell, __u32 mask,
-						    void *data, int data_is,
-						    const unsigned char *name,
-						    u32 cookie, gfp_t gfp);
-
-/* fanotify likes to change events after they are on lists... */
-extern struct fsnotify_event *fsnotify_clone_event(struct fsnotify_event *old_event);
-extern int fsnotify_replace_event(struct fsnotify_event_holder *old_holder,
-				  struct fsnotify_event *new_event);
-
-#else
-
-static inline int fsnotify(struct inode *to_tell, __u32 mask, void *data, int data_is,
-			   const unsigned char *name, u32 cookie)
-{
-	return 0;
-}
-
-static inline int __fsnotify_parent(struct path *path, struct dentry *dentry, __u32 mask)
-{
-	return 0;
-}
-
-static inline void __fsnotify_inode_delete(struct inode *inode)
-{}
-
-static inline void __fsnotify_vfsmount_delete(struct vfsmount *mnt)
-{}
-
-static inline void __fsnotify_update_dcache_flags(struct dentry *dentry)
-{}
-
-static inline void __fsnotify_d_instantiate(struct dentry *dentry, struct inode *inode)
-{}
-
-static inline u32 fsnotify_get_cookie(void)
-{
-	return 0;
-}
-
-static inline void fsnotify_unmount_inodes(struct list_head *list)
-{}
-
-#endif	/* CONFIG_FSNOTIFY */
-
-#endif	/* __KERNEL __ */
-
-#endif	/* __LINUX_FSNOTIFY_BACKEND_H */
diff --git a/ANDROID_3.4.5/include/linux/ftrace.h b/ANDROID_3.4.5/include/linux/ftrace.h
deleted file mode 100644
index 72a6cabb..00000000
--- a/ANDROID_3.4.5/include/linux/ftrace.h
+++ /dev/null
@@ -1,687 +0,0 @@
-/*
- * Ftrace header.  For implementation details beyond the random comments
- * scattered below, see: Documentation/trace/ftrace-design.txt
- */
-
-#ifndef _LINUX_FTRACE_H
-#define _LINUX_FTRACE_H
-
-#include <linux/trace_clock.h>
-#include <linux/kallsyms.h>
-#include <linux/linkage.h>
-#include <linux/bitops.h>
-#include <linux/ktime.h>
-#include <linux/sched.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/fs.h>
-
-#include <asm/ftrace.h>
-
-struct module;
-struct ftrace_hash;
-
-#ifdef CONFIG_FUNCTION_TRACER
-
-extern int ftrace_enabled;
-extern int
-ftrace_enable_sysctl(struct ctl_table *table, int write,
-		     void __user *buffer, size_t *lenp,
-		     loff_t *ppos);
-
-typedef void (*ftrace_func_t)(unsigned long ip, unsigned long parent_ip);
-
-/*
- * FTRACE_OPS_FL_* bits denote the state of ftrace_ops struct and are
- * set in the flags member.
- *
- * ENABLED - set/unset when ftrace_ops is registered/unregistered
- * GLOBAL  - set manualy by ftrace_ops user to denote the ftrace_ops
- *           is part of the global tracers sharing the same filter
- *           via set_ftrace_* debugfs files.
- * DYNAMIC - set when ftrace_ops is registered to denote dynamically
- *           allocated ftrace_ops which need special care
- * CONTROL - set manualy by ftrace_ops user to denote the ftrace_ops
- *           could be controled by following calls:
- *             ftrace_function_local_enable
- *             ftrace_function_local_disable
- */
-enum {
-	FTRACE_OPS_FL_ENABLED		= 1 << 0,
-	FTRACE_OPS_FL_GLOBAL		= 1 << 1,
-	FTRACE_OPS_FL_DYNAMIC		= 1 << 2,
-	FTRACE_OPS_FL_CONTROL		= 1 << 3,
-};
-
-struct ftrace_ops {
-	ftrace_func_t			func;
-	struct ftrace_ops		*next;
-	unsigned long			flags;
-	int __percpu			*disabled;
-#ifdef CONFIG_DYNAMIC_FTRACE
-	struct ftrace_hash		*notrace_hash;
-	struct ftrace_hash		*filter_hash;
-#endif
-};
-
-extern int function_trace_stop;
-
-/*
- * Type of the current tracing.
- */
-enum ftrace_tracing_type_t {
-	FTRACE_TYPE_ENTER = 0, /* Hook the call of the function */
-	FTRACE_TYPE_RETURN,	/* Hook the return of the function */
-};
-
-/* Current tracing type, default is FTRACE_TYPE_ENTER */
-extern enum ftrace_tracing_type_t ftrace_tracing_type;
-
-/**
- * ftrace_stop - stop function tracer.
- *
- * A quick way to stop the function tracer. Note this an on off switch,
- * it is not something that is recursive like preempt_disable.
- * This does not disable the calling of mcount, it only stops the
- * calling of functions from mcount.
- */
-static inline void ftrace_stop(void)
-{
-	function_trace_stop = 1;
-}
-
-/**
- * ftrace_start - start the function tracer.
- *
- * This function is the inverse of ftrace_stop. This does not enable
- * the function tracing if the function tracer is disabled. This only
- * sets the function tracer flag to continue calling the functions
- * from mcount.
- */
-static inline void ftrace_start(void)
-{
-	function_trace_stop = 0;
-}
-
-/*
- * The ftrace_ops must be a static and should also
- * be read_mostly.  These functions do modify read_mostly variables
- * so use them sparely. Never free an ftrace_op or modify the
- * next pointer after it has been registered. Even after unregistering
- * it, the next pointer may still be used internally.
- */
-int register_ftrace_function(struct ftrace_ops *ops);
-int unregister_ftrace_function(struct ftrace_ops *ops);
-void clear_ftrace_function(void);
-
-/**
- * ftrace_function_local_enable - enable controlled ftrace_ops on current cpu
- *
- * This function enables tracing on current cpu by decreasing
- * the per cpu control variable.
- * It must be called with preemption disabled and only on ftrace_ops
- * registered with FTRACE_OPS_FL_CONTROL. If called without preemption
- * disabled, this_cpu_ptr will complain when CONFIG_DEBUG_PREEMPT is enabled.
- */
-static inline void ftrace_function_local_enable(struct ftrace_ops *ops)
-{
-	if (WARN_ON_ONCE(!(ops->flags & FTRACE_OPS_FL_CONTROL)))
-		return;
-
-	(*this_cpu_ptr(ops->disabled))--;
-}
-
-/**
- * ftrace_function_local_disable - enable controlled ftrace_ops on current cpu
- *
- * This function enables tracing on current cpu by decreasing
- * the per cpu control variable.
- * It must be called with preemption disabled and only on ftrace_ops
- * registered with FTRACE_OPS_FL_CONTROL. If called without preemption
- * disabled, this_cpu_ptr will complain when CONFIG_DEBUG_PREEMPT is enabled.
- */
-static inline void ftrace_function_local_disable(struct ftrace_ops *ops)
-{
-	if (WARN_ON_ONCE(!(ops->flags & FTRACE_OPS_FL_CONTROL)))
-		return;
-
-	(*this_cpu_ptr(ops->disabled))++;
-}
-
-/**
- * ftrace_function_local_disabled - returns ftrace_ops disabled value
- *                                  on current cpu
- *
- * This function returns value of ftrace_ops::disabled on current cpu.
- * It must be called with preemption disabled and only on ftrace_ops
- * registered with FTRACE_OPS_FL_CONTROL. If called without preemption
- * disabled, this_cpu_ptr will complain when CONFIG_DEBUG_PREEMPT is enabled.
- */
-static inline int ftrace_function_local_disabled(struct ftrace_ops *ops)
-{
-	WARN_ON_ONCE(!(ops->flags & FTRACE_OPS_FL_CONTROL));
-	return *this_cpu_ptr(ops->disabled);
-}
-
-extern void ftrace_stub(unsigned long a0, unsigned long a1);
-
-#else /* !CONFIG_FUNCTION_TRACER */
-/*
- * (un)register_ftrace_function must be a macro since the ops parameter
- * must not be evaluated.
- */
-#define register_ftrace_function(ops) ({ 0; })
-#define unregister_ftrace_function(ops) ({ 0; })
-static inline void clear_ftrace_function(void) { }
-static inline void ftrace_kill(void) { }
-static inline void ftrace_stop(void) { }
-static inline void ftrace_start(void) { }
-#endif /* CONFIG_FUNCTION_TRACER */
-
-#ifdef CONFIG_STACK_TRACER
-extern int stack_tracer_enabled;
-int
-stack_trace_sysctl(struct ctl_table *table, int write,
-		   void __user *buffer, size_t *lenp,
-		   loff_t *ppos);
-#endif
-
-struct ftrace_func_command {
-	struct list_head	list;
-	char			*name;
-	int			(*func)(struct ftrace_hash *hash,
-					char *func, char *cmd,
-					char *params, int enable);
-};
-
-#ifdef CONFIG_DYNAMIC_FTRACE
-
-int ftrace_arch_code_modify_prepare(void);
-int ftrace_arch_code_modify_post_process(void);
-
-void ftrace_bug(int err, unsigned long ip);
-
-struct seq_file;
-
-struct ftrace_probe_ops {
-	void			(*func)(unsigned long ip,
-					unsigned long parent_ip,
-					void **data);
-	int			(*callback)(unsigned long ip, void **data);
-	void			(*free)(void **data);
-	int			(*print)(struct seq_file *m,
-					 unsigned long ip,
-					 struct ftrace_probe_ops *ops,
-					 void *data);
-};
-
-extern int
-register_ftrace_function_probe(char *glob, struct ftrace_probe_ops *ops,
-			      void *data);
-extern void
-unregister_ftrace_function_probe(char *glob, struct ftrace_probe_ops *ops,
-				void *data);
-extern void
-unregister_ftrace_function_probe_func(char *glob, struct ftrace_probe_ops *ops);
-extern void unregister_ftrace_function_probe_all(char *glob);
-
-extern int ftrace_text_reserved(void *start, void *end);
-
-enum {
-	FTRACE_FL_ENABLED	= (1 << 30),
-};
-
-#define FTRACE_FL_MASK		(0x3UL << 30)
-#define FTRACE_REF_MAX		((1 << 30) - 1)
-
-struct dyn_ftrace {
-	union {
-		unsigned long		ip; /* address of mcount call-site */
-		struct dyn_ftrace	*freelist;
-	};
-	unsigned long		flags;
-	struct dyn_arch_ftrace		arch;
-};
-
-int ftrace_force_update(void);
-int ftrace_set_filter(struct ftrace_ops *ops, unsigned char *buf,
-		       int len, int reset);
-int ftrace_set_notrace(struct ftrace_ops *ops, unsigned char *buf,
-			int len, int reset);
-void ftrace_set_global_filter(unsigned char *buf, int len, int reset);
-void ftrace_set_global_notrace(unsigned char *buf, int len, int reset);
-void ftrace_free_filter(struct ftrace_ops *ops);
-
-int register_ftrace_command(struct ftrace_func_command *cmd);
-int unregister_ftrace_command(struct ftrace_func_command *cmd);
-
-enum {
-	FTRACE_UPDATE_CALLS		= (1 << 0),
-	FTRACE_DISABLE_CALLS		= (1 << 1),
-	FTRACE_UPDATE_TRACE_FUNC	= (1 << 2),
-	FTRACE_START_FUNC_RET		= (1 << 3),
-	FTRACE_STOP_FUNC_RET		= (1 << 4),
-};
-
-enum {
-	FTRACE_UPDATE_IGNORE,
-	FTRACE_UPDATE_MAKE_CALL,
-	FTRACE_UPDATE_MAKE_NOP,
-};
-
-enum {
-	FTRACE_ITER_FILTER	= (1 << 0),
-	FTRACE_ITER_NOTRACE	= (1 << 1),
-	FTRACE_ITER_PRINTALL	= (1 << 2),
-	FTRACE_ITER_DO_HASH	= (1 << 3),
-	FTRACE_ITER_HASH	= (1 << 4),
-	FTRACE_ITER_ENABLED	= (1 << 5),
-};
-
-void arch_ftrace_update_code(int command);
-
-struct ftrace_rec_iter;
-
-struct ftrace_rec_iter *ftrace_rec_iter_start(void);
-struct ftrace_rec_iter *ftrace_rec_iter_next(struct ftrace_rec_iter *iter);
-struct dyn_ftrace *ftrace_rec_iter_record(struct ftrace_rec_iter *iter);
-
-int ftrace_update_record(struct dyn_ftrace *rec, int enable);
-int ftrace_test_record(struct dyn_ftrace *rec, int enable);
-void ftrace_run_stop_machine(int command);
-int ftrace_location(unsigned long ip);
-
-extern ftrace_func_t ftrace_trace_function;
-
-int ftrace_regex_open(struct ftrace_ops *ops, int flag,
-		  struct inode *inode, struct file *file);
-ssize_t ftrace_filter_write(struct file *file, const char __user *ubuf,
-			    size_t cnt, loff_t *ppos);
-ssize_t ftrace_notrace_write(struct file *file, const char __user *ubuf,
-			     size_t cnt, loff_t *ppos);
-loff_t ftrace_regex_lseek(struct file *file, loff_t offset, int origin);
-int ftrace_regex_release(struct inode *inode, struct file *file);
-
-void __init
-ftrace_set_early_filter(struct ftrace_ops *ops, char *buf, int enable);
-
-/* defined in arch */
-extern int ftrace_ip_converted(unsigned long ip);
-extern int ftrace_dyn_arch_init(void *data);
-extern int ftrace_update_ftrace_func(ftrace_func_t func);
-extern void ftrace_caller(void);
-extern void ftrace_call(void);
-extern void mcount_call(void);
-
-#ifndef FTRACE_ADDR
-#define FTRACE_ADDR ((unsigned long)ftrace_caller)
-#endif
-#ifdef CONFIG_FUNCTION_GRAPH_TRACER
-extern void ftrace_graph_caller(void);
-extern int ftrace_enable_ftrace_graph_caller(void);
-extern int ftrace_disable_ftrace_graph_caller(void);
-#else
-static inline int ftrace_enable_ftrace_graph_caller(void) { return 0; }
-static inline int ftrace_disable_ftrace_graph_caller(void) { return 0; }
-#endif
-
-/**
- * ftrace_make_nop - convert code into nop
- * @mod: module structure if called by module load initialization
- * @rec: the mcount call site record
- * @addr: the address that the call site should be calling
- *
- * This is a very sensitive operation and great care needs
- * to be taken by the arch.  The operation should carefully
- * read the location, check to see if what is read is indeed
- * what we expect it to be, and then on success of the compare,
- * it should write to the location.
- *
- * The code segment at @rec->ip should be a caller to @addr
- *
- * Return must be:
- *  0 on success
- *  -EFAULT on error reading the location
- *  -EINVAL on a failed compare of the contents
- *  -EPERM  on error writing to the location
- * Any other value will be considered a failure.
- */
-extern int ftrace_make_nop(struct module *mod,
-			   struct dyn_ftrace *rec, unsigned long addr);
-
-/**
- * ftrace_make_call - convert a nop call site into a call to addr
- * @rec: the mcount call site record
- * @addr: the address that the call site should call
- *
- * This is a very sensitive operation and great care needs
- * to be taken by the arch.  The operation should carefully
- * read the location, check to see if what is read is indeed
- * what we expect it to be, and then on success of the compare,
- * it should write to the location.
- *
- * The code segment at @rec->ip should be a nop
- *
- * Return must be:
- *  0 on success
- *  -EFAULT on error reading the location
- *  -EINVAL on a failed compare of the contents
- *  -EPERM  on error writing to the location
- * Any other value will be considered a failure.
- */
-extern int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr);
-
-/* May be defined in arch */
-extern int ftrace_arch_read_dyn_info(char *buf, int size);
-
-extern int skip_trace(unsigned long ip);
-
-extern void ftrace_disable_daemon(void);
-extern void ftrace_enable_daemon(void);
-#else
-static inline int skip_trace(unsigned long ip) { return 0; }
-static inline int ftrace_force_update(void) { return 0; }
-static inline void ftrace_disable_daemon(void) { }
-static inline void ftrace_enable_daemon(void) { }
-static inline void ftrace_release_mod(struct module *mod) {}
-static inline int register_ftrace_command(struct ftrace_func_command *cmd)
-{
-	return -EINVAL;
-}
-static inline int unregister_ftrace_command(char *cmd_name)
-{
-	return -EINVAL;
-}
-static inline int ftrace_text_reserved(void *start, void *end)
-{
-	return 0;
-}
-
-/*
- * Again users of functions that have ftrace_ops may not
- * have them defined when ftrace is not enabled, but these
- * functions may still be called. Use a macro instead of inline.
- */
-#define ftrace_regex_open(ops, flag, inod, file) ({ -ENODEV; })
-#define ftrace_set_early_filter(ops, buf, enable) do { } while (0)
-#define ftrace_set_filter(ops, buf, len, reset) ({ -ENODEV; })
-#define ftrace_set_notrace(ops, buf, len, reset) ({ -ENODEV; })
-#define ftrace_free_filter(ops) do { } while (0)
-
-static inline ssize_t ftrace_filter_write(struct file *file, const char __user *ubuf,
-			    size_t cnt, loff_t *ppos) { return -ENODEV; }
-static inline ssize_t ftrace_notrace_write(struct file *file, const char __user *ubuf,
-			     size_t cnt, loff_t *ppos) { return -ENODEV; }
-static inline loff_t ftrace_regex_lseek(struct file *file, loff_t offset, int origin)
-{
-	return -ENODEV;
-}
-static inline int
-ftrace_regex_release(struct inode *inode, struct file *file) { return -ENODEV; }
-#endif /* CONFIG_DYNAMIC_FTRACE */
-
-/* totally disable ftrace - can not re-enable after this */
-void ftrace_kill(void);
-
-static inline void tracer_disable(void)
-{
-#ifdef CONFIG_FUNCTION_TRACER
-	ftrace_enabled = 0;
-#endif
-}
-
-/*
- * Ftrace disable/restore without lock. Some synchronization mechanism
- * must be used to prevent ftrace_enabled to be changed between
- * disable/restore.
- */
-static inline int __ftrace_enabled_save(void)
-{
-#ifdef CONFIG_FUNCTION_TRACER
-	int saved_ftrace_enabled = ftrace_enabled;
-	ftrace_enabled = 0;
-	return saved_ftrace_enabled;
-#else
-	return 0;
-#endif
-}
-
-static inline void __ftrace_enabled_restore(int enabled)
-{
-#ifdef CONFIG_FUNCTION_TRACER
-	ftrace_enabled = enabled;
-#endif
-}
-
-#ifndef HAVE_ARCH_CALLER_ADDR
-# ifdef CONFIG_FRAME_POINTER
-#  define CALLER_ADDR0 ((unsigned long)__builtin_return_address(0))
-#  define CALLER_ADDR1 ((unsigned long)__builtin_return_address(1))
-#  define CALLER_ADDR2 ((unsigned long)__builtin_return_address(2))
-#  define CALLER_ADDR3 ((unsigned long)__builtin_return_address(3))
-#  define CALLER_ADDR4 ((unsigned long)__builtin_return_address(4))
-#  define CALLER_ADDR5 ((unsigned long)__builtin_return_address(5))
-#  define CALLER_ADDR6 ((unsigned long)__builtin_return_address(6))
-# else
-#  define CALLER_ADDR0 ((unsigned long)__builtin_return_address(0))
-#  define CALLER_ADDR1 0UL
-#  define CALLER_ADDR2 0UL
-#  define CALLER_ADDR3 0UL
-#  define CALLER_ADDR4 0UL
-#  define CALLER_ADDR5 0UL
-#  define CALLER_ADDR6 0UL
-# endif
-#endif /* ifndef HAVE_ARCH_CALLER_ADDR */
-
-#ifdef CONFIG_IRQSOFF_TRACER
-  extern void time_hardirqs_on(unsigned long a0, unsigned long a1);
-  extern void time_hardirqs_off(unsigned long a0, unsigned long a1);
-#else
-  static inline void time_hardirqs_on(unsigned long a0, unsigned long a1) { }
-  static inline void time_hardirqs_off(unsigned long a0, unsigned long a1) { }
-#endif
-
-#ifdef CONFIG_PREEMPT_TRACER
-  extern void trace_preempt_on(unsigned long a0, unsigned long a1);
-  extern void trace_preempt_off(unsigned long a0, unsigned long a1);
-#else
-  static inline void trace_preempt_on(unsigned long a0, unsigned long a1) { }
-  static inline void trace_preempt_off(unsigned long a0, unsigned long a1) { }
-#endif
-
-#ifdef CONFIG_FTRACE_MCOUNT_RECORD
-extern void ftrace_init(void);
-#else
-static inline void ftrace_init(void) { }
-#endif
-
-/*
- * Structure that defines an entry function trace.
- */
-struct ftrace_graph_ent {
-	unsigned long func; /* Current function */
-	int depth;
-};
-
-/*
- * Structure that defines a return function trace.
- */
-struct ftrace_graph_ret {
-	unsigned long func; /* Current function */
-	unsigned long long calltime;
-	unsigned long long rettime;
-	/* Number of functions that overran the depth limit for current task */
-	unsigned long overrun;
-	int depth;
-};
-
-/* Type of the callback handlers for tracing function graph*/
-typedef void (*trace_func_graph_ret_t)(struct ftrace_graph_ret *); /* return */
-typedef int (*trace_func_graph_ent_t)(struct ftrace_graph_ent *); /* entry */
-
-#ifdef CONFIG_FUNCTION_GRAPH_TRACER
-
-/* for init task */
-#define INIT_FTRACE_GRAPH		.ret_stack = NULL,
-
-/*
- * Stack of return addresses for functions
- * of a thread.
- * Used in struct thread_info
- */
-struct ftrace_ret_stack {
-	unsigned long ret;
-	unsigned long func;
-	unsigned long long calltime;
-	unsigned long long subtime;
-	unsigned long fp;
-};
-
-/*
- * Primary handler of a function return.
- * It relays on ftrace_return_to_handler.
- * Defined in entry_32/64.S
- */
-extern void return_to_handler(void);
-
-extern int
-ftrace_push_return_trace(unsigned long ret, unsigned long func, int *depth,
-			 unsigned long frame_pointer);
-
-/*
- * Sometimes we don't want to trace a function with the function
- * graph tracer but we want them to keep traced by the usual function
- * tracer if the function graph tracer is not configured.
- */
-#define __notrace_funcgraph		notrace
-
-/*
- * We want to which function is an entrypoint of a hardirq.
- * That will help us to put a signal on output.
- */
-#define __irq_entry		 __attribute__((__section__(".irqentry.text")))
-
-/* Limits of hardirq entrypoints */
-extern char __irqentry_text_start[];
-extern char __irqentry_text_end[];
-
-#define FTRACE_RETFUNC_DEPTH 50
-#define FTRACE_RETSTACK_ALLOC_SIZE 32
-extern int register_ftrace_graph(trace_func_graph_ret_t retfunc,
-				trace_func_graph_ent_t entryfunc);
-
-extern void ftrace_graph_stop(void);
-
-/* The current handlers in use */
-extern trace_func_graph_ret_t ftrace_graph_return;
-extern trace_func_graph_ent_t ftrace_graph_entry;
-
-extern void unregister_ftrace_graph(void);
-
-extern void ftrace_graph_init_task(struct task_struct *t);
-extern void ftrace_graph_exit_task(struct task_struct *t);
-extern void ftrace_graph_init_idle_task(struct task_struct *t, int cpu);
-
-static inline int task_curr_ret_stack(struct task_struct *t)
-{
-	return t->curr_ret_stack;
-}
-
-static inline void pause_graph_tracing(void)
-{
-	atomic_inc(&current->tracing_graph_pause);
-}
-
-static inline void unpause_graph_tracing(void)
-{
-	atomic_dec(&current->tracing_graph_pause);
-}
-#else /* !CONFIG_FUNCTION_GRAPH_TRACER */
-
-#define __notrace_funcgraph
-#define __irq_entry
-#define INIT_FTRACE_GRAPH
-
-static inline void ftrace_graph_init_task(struct task_struct *t) { }
-static inline void ftrace_graph_exit_task(struct task_struct *t) { }
-static inline void ftrace_graph_init_idle_task(struct task_struct *t, int cpu) { }
-
-static inline int register_ftrace_graph(trace_func_graph_ret_t retfunc,
-			  trace_func_graph_ent_t entryfunc)
-{
-	return -1;
-}
-static inline void unregister_ftrace_graph(void) { }
-
-static inline int task_curr_ret_stack(struct task_struct *tsk)
-{
-	return -1;
-}
-
-static inline void pause_graph_tracing(void) { }
-static inline void unpause_graph_tracing(void) { }
-#endif /* CONFIG_FUNCTION_GRAPH_TRACER */
-
-#ifdef CONFIG_TRACING
-
-/* flags for current->trace */
-enum {
-	TSK_TRACE_FL_TRACE_BIT	= 0,
-	TSK_TRACE_FL_GRAPH_BIT	= 1,
-};
-enum {
-	TSK_TRACE_FL_TRACE	= 1 << TSK_TRACE_FL_TRACE_BIT,
-	TSK_TRACE_FL_GRAPH	= 1 << TSK_TRACE_FL_GRAPH_BIT,
-};
-
-static inline void set_tsk_trace_trace(struct task_struct *tsk)
-{
-	set_bit(TSK_TRACE_FL_TRACE_BIT, &tsk->trace);
-}
-
-static inline void clear_tsk_trace_trace(struct task_struct *tsk)
-{
-	clear_bit(TSK_TRACE_FL_TRACE_BIT, &tsk->trace);
-}
-
-static inline int test_tsk_trace_trace(struct task_struct *tsk)
-{
-	return tsk->trace & TSK_TRACE_FL_TRACE;
-}
-
-static inline void set_tsk_trace_graph(struct task_struct *tsk)
-{
-	set_bit(TSK_TRACE_FL_GRAPH_BIT, &tsk->trace);
-}
-
-static inline void clear_tsk_trace_graph(struct task_struct *tsk)
-{
-	clear_bit(TSK_TRACE_FL_GRAPH_BIT, &tsk->trace);
-}
-
-static inline int test_tsk_trace_graph(struct task_struct *tsk)
-{
-	return tsk->trace & TSK_TRACE_FL_GRAPH;
-}
-
-enum ftrace_dump_mode;
-
-extern enum ftrace_dump_mode ftrace_dump_on_oops;
-
-#ifdef CONFIG_PREEMPT
-#define INIT_TRACE_RECURSION		.trace_recursion = 0,
-#endif
-
-#endif /* CONFIG_TRACING */
-
-#ifndef INIT_TRACE_RECURSION
-#define INIT_TRACE_RECURSION
-#endif
-
-#ifdef CONFIG_FTRACE_SYSCALLS
-
-unsigned long arch_syscall_addr(int nr);
-
-#endif /* CONFIG_FTRACE_SYSCALLS */
-
-#endif /* _LINUX_FTRACE_H */
diff --git a/ANDROID_3.4.5/include/linux/ftrace_event.h b/ANDROID_3.4.5/include/linux/ftrace_event.h
deleted file mode 100644
index 176a939d..00000000
--- a/ANDROID_3.4.5/include/linux/ftrace_event.h
+++ /dev/null
@@ -1,312 +0,0 @@
-#ifndef _LINUX_FTRACE_EVENT_H
-#define _LINUX_FTRACE_EVENT_H
-
-#include <linux/ring_buffer.h>
-#include <linux/trace_seq.h>
-#include <linux/percpu.h>
-#include <linux/hardirq.h>
-#include <linux/perf_event.h>
-
-struct trace_array;
-struct tracer;
-struct dentry;
-
-struct trace_print_flags {
-	unsigned long		mask;
-	const char		*name;
-};
-
-struct trace_print_flags_u64 {
-	unsigned long long	mask;
-	const char		*name;
-};
-
-const char *ftrace_print_flags_seq(struct trace_seq *p, const char *delim,
-				   unsigned long flags,
-				   const struct trace_print_flags *flag_array);
-
-const char *ftrace_print_symbols_seq(struct trace_seq *p, unsigned long val,
-				     const struct trace_print_flags *symbol_array);
-
-#if BITS_PER_LONG == 32
-const char *ftrace_print_symbols_seq_u64(struct trace_seq *p,
-					 unsigned long long val,
-					 const struct trace_print_flags_u64
-								 *symbol_array);
-#endif
-
-const char *ftrace_print_hex_seq(struct trace_seq *p,
-				 const unsigned char *buf, int len);
-
-/*
- * The trace entry - the most basic unit of tracing. This is what
- * is printed in the end as a single line in the trace output, such as:
- *
- *     bash-15816 [01]   235.197585: idle_cpu <- irq_enter
- */
-struct trace_entry {
-	unsigned short		type;
-	unsigned char		flags;
-	unsigned char		preempt_count;
-	int			pid;
-	int			padding;
-};
-
-#define FTRACE_MAX_EVENT						\
-	((1 << (sizeof(((struct trace_entry *)0)->type) * 8)) - 1)
-
-/*
- * Trace iterator - used by printout routines who present trace
- * results to users and which routines might sleep, etc:
- */
-struct trace_iterator {
-	struct trace_array	*tr;
-	struct tracer		*trace;
-	void			*private;
-	int			cpu_file;
-	struct mutex		mutex;
-	struct ring_buffer_iter	*buffer_iter[NR_CPUS];
-	unsigned long		iter_flags;
-
-	/* trace_seq for __print_flags() and __print_symbolic() etc. */
-	struct trace_seq	tmp_seq;
-
-	/* The below is zeroed out in pipe_read */
-	struct trace_seq	seq;
-	struct trace_entry	*ent;
-	unsigned long		lost_events;
-	int			leftover;
-	int			ent_size;
-	int			cpu;
-	u64			ts;
-
-	loff_t			pos;
-	long			idx;
-
-	cpumask_var_t		started;
-};
-
-
-struct trace_event;
-
-typedef enum print_line_t (*trace_print_func)(struct trace_iterator *iter,
-				      int flags, struct trace_event *event);
-
-struct trace_event_functions {
-	trace_print_func	trace;
-	trace_print_func	raw;
-	trace_print_func	hex;
-	trace_print_func	binary;
-};
-
-struct trace_event {
-	struct hlist_node		node;
-	struct list_head		list;
-	int				type;
-	struct trace_event_functions	*funcs;
-};
-
-extern int register_ftrace_event(struct trace_event *event);
-extern int unregister_ftrace_event(struct trace_event *event);
-
-/* Return values for print_line callback */
-enum print_line_t {
-	TRACE_TYPE_PARTIAL_LINE	= 0,	/* Retry after flushing the seq */
-	TRACE_TYPE_HANDLED	= 1,
-	TRACE_TYPE_UNHANDLED	= 2,	/* Relay to other output functions */
-	TRACE_TYPE_NO_CONSUME	= 3	/* Handled but ask to not consume */
-};
-
-void tracing_generic_entry_update(struct trace_entry *entry,
-				  unsigned long flags,
-				  int pc);
-struct ring_buffer_event *
-trace_current_buffer_lock_reserve(struct ring_buffer **current_buffer,
-				  int type, unsigned long len,
-				  unsigned long flags, int pc);
-void trace_current_buffer_unlock_commit(struct ring_buffer *buffer,
-					struct ring_buffer_event *event,
-					unsigned long flags, int pc);
-void trace_nowake_buffer_unlock_commit(struct ring_buffer *buffer,
-				       struct ring_buffer_event *event,
-					unsigned long flags, int pc);
-void trace_nowake_buffer_unlock_commit_regs(struct ring_buffer *buffer,
-					    struct ring_buffer_event *event,
-					    unsigned long flags, int pc,
-					    struct pt_regs *regs);
-void trace_current_buffer_discard_commit(struct ring_buffer *buffer,
-					 struct ring_buffer_event *event);
-
-void tracing_record_cmdline(struct task_struct *tsk);
-
-struct event_filter;
-
-enum trace_reg {
-	TRACE_REG_REGISTER,
-	TRACE_REG_UNREGISTER,
-#ifdef CONFIG_PERF_EVENTS
-	TRACE_REG_PERF_REGISTER,
-	TRACE_REG_PERF_UNREGISTER,
-	TRACE_REG_PERF_OPEN,
-	TRACE_REG_PERF_CLOSE,
-	TRACE_REG_PERF_ADD,
-	TRACE_REG_PERF_DEL,
-#endif
-};
-
-struct ftrace_event_call;
-
-struct ftrace_event_class {
-	char			*system;
-	void			*probe;
-#ifdef CONFIG_PERF_EVENTS
-	void			*perf_probe;
-#endif
-	int			(*reg)(struct ftrace_event_call *event,
-				       enum trace_reg type, void *data);
-	int			(*define_fields)(struct ftrace_event_call *);
-	struct list_head	*(*get_fields)(struct ftrace_event_call *);
-	struct list_head	fields;
-	int			(*raw_init)(struct ftrace_event_call *);
-};
-
-extern int ftrace_event_reg(struct ftrace_event_call *event,
-			    enum trace_reg type, void *data);
-
-enum {
-	TRACE_EVENT_FL_ENABLED_BIT,
-	TRACE_EVENT_FL_FILTERED_BIT,
-	TRACE_EVENT_FL_RECORDED_CMD_BIT,
-	TRACE_EVENT_FL_CAP_ANY_BIT,
-	TRACE_EVENT_FL_NO_SET_FILTER_BIT,
-	TRACE_EVENT_FL_IGNORE_ENABLE_BIT,
-};
-
-enum {
-	TRACE_EVENT_FL_ENABLED		= (1 << TRACE_EVENT_FL_ENABLED_BIT),
-	TRACE_EVENT_FL_FILTERED		= (1 << TRACE_EVENT_FL_FILTERED_BIT),
-	TRACE_EVENT_FL_RECORDED_CMD	= (1 << TRACE_EVENT_FL_RECORDED_CMD_BIT),
-	TRACE_EVENT_FL_CAP_ANY		= (1 << TRACE_EVENT_FL_CAP_ANY_BIT),
-	TRACE_EVENT_FL_NO_SET_FILTER	= (1 << TRACE_EVENT_FL_NO_SET_FILTER_BIT),
-	TRACE_EVENT_FL_IGNORE_ENABLE	= (1 << TRACE_EVENT_FL_IGNORE_ENABLE_BIT),
-};
-
-struct ftrace_event_call {
-	struct list_head	list;
-	struct ftrace_event_class *class;
-	char			*name;
-	struct dentry		*dir;
-	struct trace_event	event;
-	const char		*print_fmt;
-	struct event_filter	*filter;
-	void			*mod;
-	void			*data;
-
-	/*
-	 * 32 bit flags:
-	 *   bit 1:		enabled
-	 *   bit 2:		filter_active
-	 *   bit 3:		enabled cmd record
-	 *
-	 * Changes to flags must hold the event_mutex.
-	 *
-	 * Note: Reads of flags do not hold the event_mutex since
-	 * they occur in critical sections. But the way flags
-	 * is currently used, these changes do no affect the code
-	 * except that when a change is made, it may have a slight
-	 * delay in propagating the changes to other CPUs due to
-	 * caching and such.
-	 */
-	unsigned int		flags;
-
-#ifdef CONFIG_PERF_EVENTS
-	int				perf_refcount;
-	struct hlist_head __percpu	*perf_events;
-#endif
-};
-
-#define __TRACE_EVENT_FLAGS(name, value)				\
-	static int __init trace_init_flags_##name(void)			\
-	{								\
-		event_##name.flags = value;				\
-		return 0;						\
-	}								\
-	early_initcall(trace_init_flags_##name);
-
-#define PERF_MAX_TRACE_SIZE	2048
-
-#define MAX_FILTER_STR_VAL	256	/* Should handle KSYM_SYMBOL_LEN */
-
-extern void destroy_preds(struct ftrace_event_call *call);
-extern int filter_match_preds(struct event_filter *filter, void *rec);
-extern int filter_current_check_discard(struct ring_buffer *buffer,
-					struct ftrace_event_call *call,
-					void *rec,
-					struct ring_buffer_event *event);
-
-enum {
-	FILTER_OTHER = 0,
-	FILTER_STATIC_STRING,
-	FILTER_DYN_STRING,
-	FILTER_PTR_STRING,
-	FILTER_TRACE_FN,
-};
-
-#define EVENT_STORAGE_SIZE 128
-extern struct mutex event_storage_mutex;
-extern char event_storage[EVENT_STORAGE_SIZE];
-
-extern int trace_event_raw_init(struct ftrace_event_call *call);
-extern int trace_define_field(struct ftrace_event_call *call, const char *type,
-			      const char *name, int offset, int size,
-			      int is_signed, int filter_type);
-extern int trace_add_event_call(struct ftrace_event_call *call);
-extern void trace_remove_event_call(struct ftrace_event_call *call);
-
-#define is_signed_type(type)	(((type)(-1)) < 0)
-
-int trace_set_clr_event(const char *system, const char *event, int set);
-
-/*
- * The double __builtin_constant_p is because gcc will give us an error
- * if we try to allocate the static variable to fmt if it is not a
- * constant. Even with the outer if statement optimizing out.
- */
-#define event_trace_printk(ip, fmt, args...)				\
-do {									\
-	__trace_printk_check_format(fmt, ##args);			\
-	tracing_record_cmdline(current);				\
-	if (__builtin_constant_p(fmt)) {				\
-		static const char *trace_printk_fmt			\
-		  __attribute__((section("__trace_printk_fmt"))) =	\
-			__builtin_constant_p(fmt) ? fmt : NULL;		\
-									\
-		__trace_bprintk(ip, trace_printk_fmt, ##args);		\
-	} else								\
-		__trace_printk(ip, fmt, ##args);			\
-} while (0)
-
-#ifdef CONFIG_PERF_EVENTS
-struct perf_event;
-
-DECLARE_PER_CPU(struct pt_regs, perf_trace_regs);
-
-extern int  perf_trace_init(struct perf_event *event);
-extern void perf_trace_destroy(struct perf_event *event);
-extern int  perf_trace_add(struct perf_event *event, int flags);
-extern void perf_trace_del(struct perf_event *event, int flags);
-extern int  ftrace_profile_set_filter(struct perf_event *event, int event_id,
-				     char *filter_str);
-extern void ftrace_profile_free_filter(struct perf_event *event);
-extern void *perf_trace_buf_prepare(int size, unsigned short type,
-				    struct pt_regs *regs, int *rctxp);
-
-static inline void
-perf_trace_buf_submit(void *raw_data, int size, int rctx, u64 addr,
-		       u64 count, struct pt_regs *regs, void *head)
-{
-	perf_tp_event(addr, count, raw_data, size, regs, head, rctx);
-}
-#endif
-
-#endif /* _LINUX_FTRACE_EVENT_H */
diff --git a/ANDROID_3.4.5/include/linux/ftrace_irq.h b/ANDROID_3.4.5/include/linux/ftrace_irq.h
deleted file mode 100644
index dca7bf8c..00000000
--- a/ANDROID_3.4.5/include/linux/ftrace_irq.h
+++ /dev/null
@@ -1,13 +0,0 @@
-#ifndef _LINUX_FTRACE_IRQ_H
-#define _LINUX_FTRACE_IRQ_H
-
-
-#ifdef CONFIG_FTRACE_NMI_ENTER
-extern void ftrace_nmi_enter(void);
-extern void ftrace_nmi_exit(void);
-#else
-static inline void ftrace_nmi_enter(void) { }
-static inline void ftrace_nmi_exit(void) { }
-#endif
-
-#endif /* _LINUX_FTRACE_IRQ_H */
diff --git a/ANDROID_3.4.5/include/linux/fuse.h b/ANDROID_3.4.5/include/linux/fuse.h
deleted file mode 100644
index 8f2ab8fe..00000000
--- a/ANDROID_3.4.5/include/linux/fuse.h
+++ /dev/null
@@ -1,648 +0,0 @@
-/*
-    FUSE: Filesystem in Userspace
-    Copyright (C) 2001-2008  Miklos Szeredi <miklos@szeredi.hu>
-
-    This program can be distributed under the terms of the GNU GPL.
-    See the file COPYING.
-*/
-
-/*
- * This file defines the kernel interface of FUSE
- *
- * Protocol changelog:
- *
- * 7.9:
- *  - new fuse_getattr_in input argument of GETATTR
- *  - add lk_flags in fuse_lk_in
- *  - add lock_owner field to fuse_setattr_in, fuse_read_in and fuse_write_in
- *  - add blksize field to fuse_attr
- *  - add file flags field to fuse_read_in and fuse_write_in
- *
- * 7.10
- *  - add nonseekable open flag
- *
- * 7.11
- *  - add IOCTL message
- *  - add unsolicited notification support
- *  - add POLL message and NOTIFY_POLL notification
- *
- * 7.12
- *  - add umask flag to input argument of open, mknod and mkdir
- *  - add notification messages for invalidation of inodes and
- *    directory entries
- *
- * 7.13
- *  - make max number of background requests and congestion threshold
- *    tunables
- *
- * 7.14
- *  - add splice support to fuse device
- *
- * 7.15
- *  - add store notify
- *  - add retrieve notify
- *
- * 7.16
- *  - add BATCH_FORGET request
- *  - FUSE_IOCTL_UNRESTRICTED shall now return with array of 'struct
- *    fuse_ioctl_iovec' instead of ambiguous 'struct iovec'
- *  - add FUSE_IOCTL_32BIT flag
- *
- * 7.17
- *  - add FUSE_FLOCK_LOCKS and FUSE_RELEASE_FLOCK_UNLOCK
- *
- * 7.18
- *  - add FUSE_IOCTL_DIR flag
- *  - add FUSE_NOTIFY_DELETE
- */
-
-#ifndef _LINUX_FUSE_H
-#define _LINUX_FUSE_H
-
-#include <linux/types.h>
-
-/*
- * Version negotiation:
- *
- * Both the kernel and userspace send the version they support in the
- * INIT request and reply respectively.
- *
- * If the major versions match then both shall use the smallest
- * of the two minor versions for communication.
- *
- * If the kernel supports a larger major version, then userspace shall
- * reply with the major version it supports, ignore the rest of the
- * INIT message and expect a new INIT message from the kernel with a
- * matching major version.
- *
- * If the library supports a larger major version, then it shall fall
- * back to the major protocol version sent by the kernel for
- * communication and reply with that major version (and an arbitrary
- * supported minor version).
- */
-
-/** Version number of this interface */
-#define FUSE_KERNEL_VERSION 7
-
-/** Minor version number of this interface */
-#define FUSE_KERNEL_MINOR_VERSION 18
-
-/** The node ID of the root inode */
-#define FUSE_ROOT_ID 1
-
-/* Make sure all structures are padded to 64bit boundary, so 32bit
-   userspace works under 64bit kernels */
-
-struct fuse_attr {
-	__u64	ino;
-	__u64	size;
-	__u64	blocks;
-	__u64	atime;
-	__u64	mtime;
-	__u64	ctime;
-	__u32	atimensec;
-	__u32	mtimensec;
-	__u32	ctimensec;
-	__u32	mode;
-	__u32	nlink;
-	__u32	uid;
-	__u32	gid;
-	__u32	rdev;
-	__u32	blksize;
-	__u32	padding;
-};
-
-struct fuse_kstatfs {
-	__u64	blocks;
-	__u64	bfree;
-	__u64	bavail;
-	__u64	files;
-	__u64	ffree;
-	__u32	bsize;
-	__u32	namelen;
-	__u32	frsize;
-	__u32	padding;
-	__u32	spare[6];
-};
-
-struct fuse_file_lock {
-	__u64	start;
-	__u64	end;
-	__u32	type;
-	__u32	pid; /* tgid */
-};
-
-/**
- * Bitmasks for fuse_setattr_in.valid
- */
-#define FATTR_MODE	(1 << 0)
-#define FATTR_UID	(1 << 1)
-#define FATTR_GID	(1 << 2)
-#define FATTR_SIZE	(1 << 3)
-#define FATTR_ATIME	(1 << 4)
-#define FATTR_MTIME	(1 << 5)
-#define FATTR_FH	(1 << 6)
-#define FATTR_ATIME_NOW	(1 << 7)
-#define FATTR_MTIME_NOW	(1 << 8)
-#define FATTR_LOCKOWNER	(1 << 9)
-
-/**
- * Flags returned by the OPEN request
- *
- * FOPEN_DIRECT_IO: bypass page cache for this open file
- * FOPEN_KEEP_CACHE: don't invalidate the data cache on open
- * FOPEN_NONSEEKABLE: the file is not seekable
- */
-#define FOPEN_DIRECT_IO		(1 << 0)
-#define FOPEN_KEEP_CACHE	(1 << 1)
-#define FOPEN_NONSEEKABLE	(1 << 2)
-
-/**
- * INIT request/reply flags
- *
- * FUSE_POSIX_LOCKS: remote locking for POSIX file locks
- * FUSE_EXPORT_SUPPORT: filesystem handles lookups of "." and ".."
- * FUSE_DONT_MASK: don't apply umask to file mode on create operations
- * FUSE_FLOCK_LOCKS: remote locking for BSD style file locks
- */
-#define FUSE_ASYNC_READ		(1 << 0)
-#define FUSE_POSIX_LOCKS	(1 << 1)
-#define FUSE_FILE_OPS		(1 << 2)
-#define FUSE_ATOMIC_O_TRUNC	(1 << 3)
-#define FUSE_EXPORT_SUPPORT	(1 << 4)
-#define FUSE_BIG_WRITES		(1 << 5)
-#define FUSE_DONT_MASK		(1 << 6)
-#define FUSE_FLOCK_LOCKS	(1 << 10)
-
-/**
- * CUSE INIT request/reply flags
- *
- * CUSE_UNRESTRICTED_IOCTL:  use unrestricted ioctl
- */
-#define CUSE_UNRESTRICTED_IOCTL	(1 << 0)
-
-/**
- * Release flags
- */
-#define FUSE_RELEASE_FLUSH	(1 << 0)
-#define FUSE_RELEASE_FLOCK_UNLOCK	(1 << 1)
-
-/**
- * Getattr flags
- */
-#define FUSE_GETATTR_FH		(1 << 0)
-
-/**
- * Lock flags
- */
-#define FUSE_LK_FLOCK		(1 << 0)
-
-/**
- * WRITE flags
- *
- * FUSE_WRITE_CACHE: delayed write from page cache, file handle is guessed
- * FUSE_WRITE_LOCKOWNER: lock_owner field is valid
- */
-#define FUSE_WRITE_CACHE	(1 << 0)
-#define FUSE_WRITE_LOCKOWNER	(1 << 1)
-
-/**
- * Read flags
- */
-#define FUSE_READ_LOCKOWNER	(1 << 1)
-
-/**
- * Ioctl flags
- *
- * FUSE_IOCTL_COMPAT: 32bit compat ioctl on 64bit machine
- * FUSE_IOCTL_UNRESTRICTED: not restricted to well-formed ioctls, retry allowed
- * FUSE_IOCTL_RETRY: retry with new iovecs
- * FUSE_IOCTL_32BIT: 32bit ioctl
- * FUSE_IOCTL_DIR: is a directory
- *
- * FUSE_IOCTL_MAX_IOV: maximum of in_iovecs + out_iovecs
- */
-#define FUSE_IOCTL_COMPAT	(1 << 0)
-#define FUSE_IOCTL_UNRESTRICTED	(1 << 1)
-#define FUSE_IOCTL_RETRY	(1 << 2)
-#define FUSE_IOCTL_32BIT	(1 << 3)
-#define FUSE_IOCTL_DIR		(1 << 4)
-
-#define FUSE_IOCTL_MAX_IOV	256
-
-/**
- * Poll flags
- *
- * FUSE_POLL_SCHEDULE_NOTIFY: request poll notify
- */
-#define FUSE_POLL_SCHEDULE_NOTIFY (1 << 0)
-
-enum fuse_opcode {
-	FUSE_LOOKUP	   = 1,
-	FUSE_FORGET	   = 2,  /* no reply */
-	FUSE_GETATTR	   = 3,
-	FUSE_SETATTR	   = 4,
-	FUSE_READLINK	   = 5,
-	FUSE_SYMLINK	   = 6,
-	FUSE_MKNOD	   = 8,
-	FUSE_MKDIR	   = 9,
-	FUSE_UNLINK	   = 10,
-	FUSE_RMDIR	   = 11,
-	FUSE_RENAME	   = 12,
-	FUSE_LINK	   = 13,
-	FUSE_OPEN	   = 14,
-	FUSE_READ	   = 15,
-	FUSE_WRITE	   = 16,
-	FUSE_STATFS	   = 17,
-	FUSE_RELEASE       = 18,
-	FUSE_FSYNC         = 20,
-	FUSE_SETXATTR      = 21,
-	FUSE_GETXATTR      = 22,
-	FUSE_LISTXATTR     = 23,
-	FUSE_REMOVEXATTR   = 24,
-	FUSE_FLUSH         = 25,
-	FUSE_INIT          = 26,
-	FUSE_OPENDIR       = 27,
-	FUSE_READDIR       = 28,
-	FUSE_RELEASEDIR    = 29,
-	FUSE_FSYNCDIR      = 30,
-	FUSE_GETLK         = 31,
-	FUSE_SETLK         = 32,
-	FUSE_SETLKW        = 33,
-	FUSE_ACCESS        = 34,
-	FUSE_CREATE        = 35,
-	FUSE_INTERRUPT     = 36,
-	FUSE_BMAP          = 37,
-	FUSE_DESTROY       = 38,
-	FUSE_IOCTL         = 39,
-	FUSE_POLL          = 40,
-	FUSE_NOTIFY_REPLY  = 41,
-	FUSE_BATCH_FORGET  = 42,
-
-	/* CUSE specific operations */
-	CUSE_INIT          = 4096,
-};
-
-enum fuse_notify_code {
-	FUSE_NOTIFY_POLL   = 1,
-	FUSE_NOTIFY_INVAL_INODE = 2,
-	FUSE_NOTIFY_INVAL_ENTRY = 3,
-	FUSE_NOTIFY_STORE = 4,
-	FUSE_NOTIFY_RETRIEVE = 5,
-	FUSE_NOTIFY_DELETE = 6,
-	FUSE_NOTIFY_CODE_MAX,
-};
-
-/* The read buffer is required to be at least 8k, but may be much larger */
-#define FUSE_MIN_READ_BUFFER 8192
-
-#define FUSE_COMPAT_ENTRY_OUT_SIZE 120
-
-struct fuse_entry_out {
-	__u64	nodeid;		/* Inode ID */
-	__u64	generation;	/* Inode generation: nodeid:gen must
-				   be unique for the fs's lifetime */
-	__u64	entry_valid;	/* Cache timeout for the name */
-	__u64	attr_valid;	/* Cache timeout for the attributes */
-	__u32	entry_valid_nsec;
-	__u32	attr_valid_nsec;
-	struct fuse_attr attr;
-};
-
-struct fuse_forget_in {
-	__u64	nlookup;
-};
-
-struct fuse_forget_one {
-	__u64	nodeid;
-	__u64	nlookup;
-};
-
-struct fuse_batch_forget_in {
-	__u32	count;
-	__u32	dummy;
-};
-
-struct fuse_getattr_in {
-	__u32	getattr_flags;
-	__u32	dummy;
-	__u64	fh;
-};
-
-#define FUSE_COMPAT_ATTR_OUT_SIZE 96
-
-struct fuse_attr_out {
-	__u64	attr_valid;	/* Cache timeout for the attributes */
-	__u32	attr_valid_nsec;
-	__u32	dummy;
-	struct fuse_attr attr;
-};
-
-#define FUSE_COMPAT_MKNOD_IN_SIZE 8
-
-struct fuse_mknod_in {
-	__u32	mode;
-	__u32	rdev;
-	__u32	umask;
-	__u32	padding;
-};
-
-struct fuse_mkdir_in {
-	__u32	mode;
-	__u32	umask;
-};
-
-struct fuse_rename_in {
-	__u64	newdir;
-};
-
-struct fuse_link_in {
-	__u64	oldnodeid;
-};
-
-struct fuse_setattr_in {
-	__u32	valid;
-	__u32	padding;
-	__u64	fh;
-	__u64	size;
-	__u64	lock_owner;
-	__u64	atime;
-	__u64	mtime;
-	__u64	unused2;
-	__u32	atimensec;
-	__u32	mtimensec;
-	__u32	unused3;
-	__u32	mode;
-	__u32	unused4;
-	__u32	uid;
-	__u32	gid;
-	__u32	unused5;
-};
-
-struct fuse_open_in {
-	__u32	flags;
-	__u32	unused;
-};
-
-struct fuse_create_in {
-	__u32	flags;
-	__u32	mode;
-	__u32	umask;
-	__u32	padding;
-};
-
-struct fuse_open_out {
-	__u64	fh;
-	__u32	open_flags;
-	__u32	padding;
-};
-
-struct fuse_release_in {
-	__u64	fh;
-	__u32	flags;
-	__u32	release_flags;
-	__u64	lock_owner;
-};
-
-struct fuse_flush_in {
-	__u64	fh;
-	__u32	unused;
-	__u32	padding;
-	__u64	lock_owner;
-};
-
-struct fuse_read_in {
-	__u64	fh;
-	__u64	offset;
-	__u32	size;
-	__u32	read_flags;
-	__u64	lock_owner;
-	__u32	flags;
-	__u32	padding;
-};
-
-#define FUSE_COMPAT_WRITE_IN_SIZE 24
-
-struct fuse_write_in {
-	__u64	fh;
-	__u64	offset;
-	__u32	size;
-	__u32	write_flags;
-	__u64	lock_owner;
-	__u32	flags;
-	__u32	padding;
-};
-
-struct fuse_write_out {
-	__u32	size;
-	__u32	padding;
-};
-
-#define FUSE_COMPAT_STATFS_SIZE 48
-
-struct fuse_statfs_out {
-	struct fuse_kstatfs st;
-};
-
-struct fuse_fsync_in {
-	__u64	fh;
-	__u32	fsync_flags;
-	__u32	padding;
-};
-
-struct fuse_setxattr_in {
-	__u32	size;
-	__u32	flags;
-};
-
-struct fuse_getxattr_in {
-	__u32	size;
-	__u32	padding;
-};
-
-struct fuse_getxattr_out {
-	__u32	size;
-	__u32	padding;
-};
-
-struct fuse_lk_in {
-	__u64	fh;
-	__u64	owner;
-	struct fuse_file_lock lk;
-	__u32	lk_flags;
-	__u32	padding;
-};
-
-struct fuse_lk_out {
-	struct fuse_file_lock lk;
-};
-
-struct fuse_access_in {
-	__u32	mask;
-	__u32	padding;
-};
-
-struct fuse_init_in {
-	__u32	major;
-	__u32	minor;
-	__u32	max_readahead;
-	__u32	flags;
-};
-
-struct fuse_init_out {
-	__u32	major;
-	__u32	minor;
-	__u32	max_readahead;
-	__u32	flags;
-	__u16   max_background;
-	__u16   congestion_threshold;
-	__u32	max_write;
-};
-
-#define CUSE_INIT_INFO_MAX 4096
-
-struct cuse_init_in {
-	__u32	major;
-	__u32	minor;
-	__u32	unused;
-	__u32	flags;
-};
-
-struct cuse_init_out {
-	__u32	major;
-	__u32	minor;
-	__u32	unused;
-	__u32	flags;
-	__u32	max_read;
-	__u32	max_write;
-	__u32	dev_major;		/* chardev major */
-	__u32	dev_minor;		/* chardev minor */
-	__u32	spare[10];
-};
-
-struct fuse_interrupt_in {
-	__u64	unique;
-};
-
-struct fuse_bmap_in {
-	__u64	block;
-	__u32	blocksize;
-	__u32	padding;
-};
-
-struct fuse_bmap_out {
-	__u64	block;
-};
-
-struct fuse_ioctl_in {
-	__u64	fh;
-	__u32	flags;
-	__u32	cmd;
-	__u64	arg;
-	__u32	in_size;
-	__u32	out_size;
-};
-
-struct fuse_ioctl_iovec {
-	__u64	base;
-	__u64	len;
-};
-
-struct fuse_ioctl_out {
-	__s32	result;
-	__u32	flags;
-	__u32	in_iovs;
-	__u32	out_iovs;
-};
-
-struct fuse_poll_in {
-	__u64	fh;
-	__u64	kh;
-	__u32	flags;
-	__u32   padding;
-};
-
-struct fuse_poll_out {
-	__u32	revents;
-	__u32	padding;
-};
-
-struct fuse_notify_poll_wakeup_out {
-	__u64	kh;
-};
-
-struct fuse_in_header {
-	__u32	len;
-	__u32	opcode;
-	__u64	unique;
-	__u64	nodeid;
-	__u32	uid;
-	__u32	gid;
-	__u32	pid;
-	__u32	padding;
-};
-
-struct fuse_out_header {
-	__u32	len;
-	__s32	error;
-	__u64	unique;
-};
-
-struct fuse_dirent {
-	__u64	ino;
-	__u64	off;
-	__u32	namelen;
-	__u32	type;
-	char name[];
-};
-
-#define FUSE_NAME_OFFSET offsetof(struct fuse_dirent, name)
-#define FUSE_DIRENT_ALIGN(x) (((x) + sizeof(__u64) - 1) & ~(sizeof(__u64) - 1))
-#define FUSE_DIRENT_SIZE(d) \
-	FUSE_DIRENT_ALIGN(FUSE_NAME_OFFSET + (d)->namelen)
-
-struct fuse_notify_inval_inode_out {
-	__u64	ino;
-	__s64	off;
-	__s64	len;
-};
-
-struct fuse_notify_inval_entry_out {
-	__u64	parent;
-	__u32	namelen;
-	__u32	padding;
-};
-
-struct fuse_notify_delete_out {
-	__u64	parent;
-	__u64	child;
-	__u32	namelen;
-	__u32	padding;
-};
-
-struct fuse_notify_store_out {
-	__u64	nodeid;
-	__u64	offset;
-	__u32	size;
-	__u32	padding;
-};
-
-struct fuse_notify_retrieve_out {
-	__u64	notify_unique;
-	__u64	nodeid;
-	__u64	offset;
-	__u32	size;
-	__u32	padding;
-};
-
-/* Matches the size of fuse_write_in */
-struct fuse_notify_retrieve_in {
-	__u64	dummy1;
-	__u64	offset;
-	__u32	size;
-	__u32	dummy2;
-	__u64	dummy3;
-	__u64	dummy4;
-};
-
-#endif /* _LINUX_FUSE_H */
diff --git a/ANDROID_3.4.5/include/linux/futex.h b/ANDROID_3.4.5/include/linux/futex.h
deleted file mode 100644
index 1e5a26d7..00000000
--- a/ANDROID_3.4.5/include/linux/futex.h
+++ /dev/null
@@ -1,215 +0,0 @@
-#ifndef _LINUX_FUTEX_H
-#define _LINUX_FUTEX_H
-
-#include <linux/compiler.h>
-#include <linux/types.h>
-
-/* Second argument to futex syscall */
-
-
-#define FUTEX_WAIT		0
-#define FUTEX_WAKE		1
-#define FUTEX_FD		2
-#define FUTEX_REQUEUE		3
-#define FUTEX_CMP_REQUEUE	4
-#define FUTEX_WAKE_OP		5
-#define FUTEX_LOCK_PI		6
-#define FUTEX_UNLOCK_PI		7
-#define FUTEX_TRYLOCK_PI	8
-#define FUTEX_WAIT_BITSET	9
-#define FUTEX_WAKE_BITSET	10
-#define FUTEX_WAIT_REQUEUE_PI	11
-#define FUTEX_CMP_REQUEUE_PI	12
-
-#define FUTEX_PRIVATE_FLAG	128
-#define FUTEX_CLOCK_REALTIME	256
-#define FUTEX_CMD_MASK		~(FUTEX_PRIVATE_FLAG | FUTEX_CLOCK_REALTIME)
-
-#define FUTEX_WAIT_PRIVATE	(FUTEX_WAIT | FUTEX_PRIVATE_FLAG)
-#define FUTEX_WAKE_PRIVATE	(FUTEX_WAKE | FUTEX_PRIVATE_FLAG)
-#define FUTEX_REQUEUE_PRIVATE	(FUTEX_REQUEUE | FUTEX_PRIVATE_FLAG)
-#define FUTEX_CMP_REQUEUE_PRIVATE (FUTEX_CMP_REQUEUE | FUTEX_PRIVATE_FLAG)
-#define FUTEX_WAKE_OP_PRIVATE	(FUTEX_WAKE_OP | FUTEX_PRIVATE_FLAG)
-#define FUTEX_LOCK_PI_PRIVATE	(FUTEX_LOCK_PI | FUTEX_PRIVATE_FLAG)
-#define FUTEX_UNLOCK_PI_PRIVATE	(FUTEX_UNLOCK_PI | FUTEX_PRIVATE_FLAG)
-#define FUTEX_TRYLOCK_PI_PRIVATE (FUTEX_TRYLOCK_PI | FUTEX_PRIVATE_FLAG)
-#define FUTEX_WAIT_BITSET_PRIVATE	(FUTEX_WAIT_BITSET | FUTEX_PRIVATE_FLAG)
-#define FUTEX_WAKE_BITSET_PRIVATE	(FUTEX_WAKE_BITSET | FUTEX_PRIVATE_FLAG)
-#define FUTEX_WAIT_REQUEUE_PI_PRIVATE	(FUTEX_WAIT_REQUEUE_PI | \
-					 FUTEX_PRIVATE_FLAG)
-#define FUTEX_CMP_REQUEUE_PI_PRIVATE	(FUTEX_CMP_REQUEUE_PI | \
-					 FUTEX_PRIVATE_FLAG)
-
-/*
- * Support for robust futexes: the kernel cleans up held futexes at
- * thread exit time.
- */
-
-/*
- * Per-lock list entry - embedded in user-space locks, somewhere close
- * to the futex field. (Note: user-space uses a double-linked list to
- * achieve O(1) list add and remove, but the kernel only needs to know
- * about the forward link)
- *
- * NOTE: this structure is part of the syscall ABI, and must not be
- * changed.
- */
-struct robust_list {
-	struct robust_list __user *next;
-};
-
-/*
- * Per-thread list head:
- *
- * NOTE: this structure is part of the syscall ABI, and must only be
- * changed if the change is first communicated with the glibc folks.
- * (When an incompatible change is done, we'll increase the structure
- *  size, which glibc will detect)
- */
-struct robust_list_head {
-	/*
-	 * The head of the list. Points back to itself if empty:
-	 */
-	struct robust_list list;
-
-	/*
-	 * This relative offset is set by user-space, it gives the kernel
-	 * the relative position of the futex field to examine. This way
-	 * we keep userspace flexible, to freely shape its data-structure,
-	 * without hardcoding any particular offset into the kernel:
-	 */
-	long futex_offset;
-
-	/*
-	 * The death of the thread may race with userspace setting
-	 * up a lock's links. So to handle this race, userspace first
-	 * sets this field to the address of the to-be-taken lock,
-	 * then does the lock acquire, and then adds itself to the
-	 * list, and then clears this field. Hence the kernel will
-	 * always have full knowledge of all locks that the thread
-	 * _might_ have taken. We check the owner TID in any case,
-	 * so only truly owned locks will be handled.
-	 */
-	struct robust_list __user *list_op_pending;
-};
-
-/*
- * Are there any waiters for this robust futex:
- */
-#define FUTEX_WAITERS		0x80000000
-
-/*
- * The kernel signals via this bit that a thread holding a futex
- * has exited without unlocking the futex. The kernel also does
- * a FUTEX_WAKE on such futexes, after setting the bit, to wake
- * up any possible waiters:
- */
-#define FUTEX_OWNER_DIED	0x40000000
-
-/*
- * The rest of the robust-futex field is for the TID:
- */
-#define FUTEX_TID_MASK		0x3fffffff
-
-/*
- * This limit protects against a deliberately circular list.
- * (Not worth introducing an rlimit for it)
- */
-#define ROBUST_LIST_LIMIT	2048
-
-/*
- * bitset with all bits set for the FUTEX_xxx_BITSET OPs to request a
- * match of any bit.
- */
-#define FUTEX_BITSET_MATCH_ANY	0xffffffff
-
-#ifdef __KERNEL__
-struct inode;
-struct mm_struct;
-struct task_struct;
-union ktime;
-
-long do_futex(u32 __user *uaddr, int op, u32 val, union ktime *timeout,
-	      u32 __user *uaddr2, u32 val2, u32 val3);
-
-extern int
-handle_futex_death(u32 __user *uaddr, struct task_struct *curr, int pi);
-
-/*
- * Futexes are matched on equal values of this key.
- * The key type depends on whether it's a shared or private mapping.
- * Don't rearrange members without looking at hash_futex().
- *
- * offset is aligned to a multiple of sizeof(u32) (== 4) by definition.
- * We use the two low order bits of offset to tell what is the kind of key :
- *  00 : Private process futex (PTHREAD_PROCESS_PRIVATE)
- *       (no reference on an inode or mm)
- *  01 : Shared futex (PTHREAD_PROCESS_SHARED)
- *	mapped on a file (reference on the underlying inode)
- *  10 : Shared futex (PTHREAD_PROCESS_SHARED)
- *       (but private mapping on an mm, and reference taken on it)
-*/
-
-#define FUT_OFF_INODE    1 /* We set bit 0 if key has a reference on inode */
-#define FUT_OFF_MMSHARED 2 /* We set bit 1 if key has a reference on mm */
-
-union futex_key {
-	struct {
-		unsigned long pgoff;
-		struct inode *inode;
-		int offset;
-	} shared;
-	struct {
-		unsigned long address;
-		struct mm_struct *mm;
-		int offset;
-	} private;
-	struct {
-		unsigned long word;
-		void *ptr;
-		int offset;
-	} both;
-};
-
-#define FUTEX_KEY_INIT (union futex_key) { .both = { .ptr = NULL } }
-
-#ifdef CONFIG_FUTEX
-extern void exit_robust_list(struct task_struct *curr);
-extern void exit_pi_state_list(struct task_struct *curr);
-extern int futex_cmpxchg_enabled;
-#else
-static inline void exit_robust_list(struct task_struct *curr)
-{
-}
-static inline void exit_pi_state_list(struct task_struct *curr)
-{
-}
-#endif
-#endif /* __KERNEL__ */
-
-#define FUTEX_OP_SET		0	/* *(int *)UADDR2 = OPARG; */
-#define FUTEX_OP_ADD		1	/* *(int *)UADDR2 += OPARG; */
-#define FUTEX_OP_OR		2	/* *(int *)UADDR2 |= OPARG; */
-#define FUTEX_OP_ANDN		3	/* *(int *)UADDR2 &= ~OPARG; */
-#define FUTEX_OP_XOR		4	/* *(int *)UADDR2 ^= OPARG; */
-
-#define FUTEX_OP_OPARG_SHIFT	8	/* Use (1 << OPARG) instead of OPARG.  */
-
-#define FUTEX_OP_CMP_EQ		0	/* if (oldval == CMPARG) wake */
-#define FUTEX_OP_CMP_NE		1	/* if (oldval != CMPARG) wake */
-#define FUTEX_OP_CMP_LT		2	/* if (oldval < CMPARG) wake */
-#define FUTEX_OP_CMP_LE		3	/* if (oldval <= CMPARG) wake */
-#define FUTEX_OP_CMP_GT		4	/* if (oldval > CMPARG) wake */
-#define FUTEX_OP_CMP_GE		5	/* if (oldval >= CMPARG) wake */
-
-/* FUTEX_WAKE_OP will perform atomically
-   int oldval = *(int *)UADDR2;
-   *(int *)UADDR2 = oldval OP OPARG;
-   if (oldval CMP CMPARG)
-     wake UADDR2;  */
-
-#define FUTEX_OP(op, oparg, cmp, cmparg) \
-  (((op & 0xf) << 28) | ((cmp & 0xf) << 24)		\
-   | ((oparg & 0xfff) << 12) | (cmparg & 0xfff))
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/gameport.h b/ANDROID_3.4.5/include/linux/gameport.h
deleted file mode 100644
index b456b08d..00000000
--- a/ANDROID_3.4.5/include/linux/gameport.h
+++ /dev/null
@@ -1,226 +0,0 @@
-#ifndef _GAMEPORT_H
-#define _GAMEPORT_H
-
-/*
- *  Copyright (c) 1999-2002 Vojtech Pavlik
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-
-#ifdef __KERNEL__
-#include <asm/io.h>
-#include <linux/types.h>
-#include <linux/list.h>
-#include <linux/mutex.h>
-#include <linux/device.h>
-#include <linux/timer.h>
-#include <linux/slab.h>
-
-struct gameport {
-
-	void *port_data;	/* Private pointer for gameport drivers */
-	char name[32];
-	char phys[32];
-
-	int io;
-	int speed;
-	int fuzz;
-
-	void (*trigger)(struct gameport *);
-	unsigned char (*read)(struct gameport *);
-	int (*cooked_read)(struct gameport *, int *, int *);
-	int (*calibrate)(struct gameport *, int *, int *);
-	int (*open)(struct gameport *, int);
-	void (*close)(struct gameport *);
-
-	struct timer_list poll_timer;
-	unsigned int poll_interval;	/* in msecs */
-	spinlock_t timer_lock;
-	unsigned int poll_cnt;
-	void (*poll_handler)(struct gameport *);
-
-	struct gameport *parent, *child;
-
-	struct gameport_driver *drv;
-	struct mutex drv_mutex;		/* protects serio->drv so attributes can pin driver */
-
-	struct device dev;
-
-	struct list_head node;
-};
-#define to_gameport_port(d)	container_of(d, struct gameport, dev)
-
-struct gameport_driver {
-	const char *description;
-
-	int (*connect)(struct gameport *, struct gameport_driver *drv);
-	int (*reconnect)(struct gameport *);
-	void (*disconnect)(struct gameport *);
-
-	struct device_driver driver;
-
-	bool ignore;
-};
-#define to_gameport_driver(d)	container_of(d, struct gameport_driver, driver)
-
-int gameport_open(struct gameport *gameport, struct gameport_driver *drv, int mode);
-void gameport_close(struct gameport *gameport);
-
-#if defined(CONFIG_GAMEPORT) || (defined(MODULE) && defined(CONFIG_GAMEPORT_MODULE))
-
-void __gameport_register_port(struct gameport *gameport, struct module *owner);
-/* use a define to avoid include chaining to get THIS_MODULE */
-#define gameport_register_port(gameport) \
-	__gameport_register_port(gameport, THIS_MODULE)
-
-void gameport_unregister_port(struct gameport *gameport);
-
-__printf(2, 3)
-void gameport_set_phys(struct gameport *gameport, const char *fmt, ...);
-
-#else
-
-static inline void gameport_register_port(struct gameport *gameport)
-{
-	return;
-}
-
-static inline void gameport_unregister_port(struct gameport *gameport)
-{
-	return;
-}
-
-static inline __printf(2, 3)
-void gameport_set_phys(struct gameport *gameport, const char *fmt, ...)
-{
-	return;
-}
-
-#endif
-
-static inline struct gameport *gameport_allocate_port(void)
-{
-	struct gameport *gameport = kzalloc(sizeof(struct gameport), GFP_KERNEL);
-
-	return gameport;
-}
-
-static inline void gameport_free_port(struct gameport *gameport)
-{
-	kfree(gameport);
-}
-
-static inline void gameport_set_name(struct gameport *gameport, const char *name)
-{
-	strlcpy(gameport->name, name, sizeof(gameport->name));
-}
-
-/*
- * Use the following functions to manipulate gameport's per-port
- * driver-specific data.
- */
-static inline void *gameport_get_drvdata(struct gameport *gameport)
-{
-	return dev_get_drvdata(&gameport->dev);
-}
-
-static inline void gameport_set_drvdata(struct gameport *gameport, void *data)
-{
-	dev_set_drvdata(&gameport->dev, data);
-}
-
-/*
- * Use the following functions to pin gameport's driver in process context
- */
-static inline int gameport_pin_driver(struct gameport *gameport)
-{
-	return mutex_lock_interruptible(&gameport->drv_mutex);
-}
-
-static inline void gameport_unpin_driver(struct gameport *gameport)
-{
-	mutex_unlock(&gameport->drv_mutex);
-}
-
-int __must_check __gameport_register_driver(struct gameport_driver *drv,
-				struct module *owner, const char *mod_name);
-
-/* use a define to avoid include chaining to get THIS_MODULE & friends */
-#define gameport_register_driver(drv) \
-	__gameport_register_driver(drv, THIS_MODULE, KBUILD_MODNAME)
-
-void gameport_unregister_driver(struct gameport_driver *drv);
-
-#endif /* __KERNEL__ */
-
-#define GAMEPORT_MODE_DISABLED		0
-#define GAMEPORT_MODE_RAW		1
-#define GAMEPORT_MODE_COOKED		2
-
-#define GAMEPORT_ID_VENDOR_ANALOG	0x0001
-#define GAMEPORT_ID_VENDOR_MADCATZ	0x0002
-#define GAMEPORT_ID_VENDOR_LOGITECH	0x0003
-#define GAMEPORT_ID_VENDOR_CREATIVE	0x0004
-#define GAMEPORT_ID_VENDOR_GENIUS	0x0005
-#define GAMEPORT_ID_VENDOR_INTERACT	0x0006
-#define GAMEPORT_ID_VENDOR_MICROSOFT	0x0007
-#define GAMEPORT_ID_VENDOR_THRUSTMASTER	0x0008
-#define GAMEPORT_ID_VENDOR_GRAVIS	0x0009
-#define GAMEPORT_ID_VENDOR_GUILLEMOT	0x000a
-
-#ifdef __KERNEL__
-
-static inline void gameport_trigger(struct gameport *gameport)
-{
-	if (gameport->trigger)
-		gameport->trigger(gameport);
-	else
-		outb(0xff, gameport->io);
-}
-
-static inline unsigned char gameport_read(struct gameport *gameport)
-{
-	if (gameport->read)
-		return gameport->read(gameport);
-	else
-		return inb(gameport->io);
-}
-
-static inline int gameport_cooked_read(struct gameport *gameport, int *axes, int *buttons)
-{
-	if (gameport->cooked_read)
-		return gameport->cooked_read(gameport, axes, buttons);
-	else
-		return -1;
-}
-
-static inline int gameport_calibrate(struct gameport *gameport, int *axes, int *max)
-{
-	if (gameport->calibrate)
-		return gameport->calibrate(gameport, axes, max);
-	else
-		return -1;
-}
-
-static inline int gameport_time(struct gameport *gameport, int time)
-{
-	return (time * gameport->speed) / 1000;
-}
-
-static inline void gameport_set_poll_handler(struct gameport *gameport, void (*handler)(struct gameport *))
-{
-	gameport->poll_handler = handler;
-}
-
-static inline void gameport_set_poll_interval(struct gameport *gameport, unsigned int msecs)
-{
-	gameport->poll_interval = msecs;
-}
-
-void gameport_start_polling(struct gameport *gameport);
-void gameport_stop_polling(struct gameport *gameport);
-
-#endif /* __KERNEL__ */
-#endif
diff --git a/ANDROID_3.4.5/include/linux/gcd.h b/ANDROID_3.4.5/include/linux/gcd.h
deleted file mode 100644
index 69f5e8a0..00000000
--- a/ANDROID_3.4.5/include/linux/gcd.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef _GCD_H
-#define _GCD_H
-
-#include <linux/compiler.h>
-
-unsigned long gcd(unsigned long a, unsigned long b) __attribute_const__;
-
-#endif /* _GCD_H */
diff --git a/ANDROID_3.4.5/include/linux/gen_stats.h b/ANDROID_3.4.5/include/linux/gen_stats.h
deleted file mode 100644
index 552c8a0a..00000000
--- a/ANDROID_3.4.5/include/linux/gen_stats.h
+++ /dev/null
@@ -1,67 +0,0 @@
-#ifndef __LINUX_GEN_STATS_H
-#define __LINUX_GEN_STATS_H
-
-#include <linux/types.h>
-
-enum {
-	TCA_STATS_UNSPEC,
-	TCA_STATS_BASIC,
-	TCA_STATS_RATE_EST,
-	TCA_STATS_QUEUE,
-	TCA_STATS_APP,
-	__TCA_STATS_MAX,
-};
-#define TCA_STATS_MAX (__TCA_STATS_MAX - 1)
-
-/**
- * struct gnet_stats_basic - byte/packet throughput statistics
- * @bytes: number of seen bytes
- * @packets: number of seen packets
- */
-struct gnet_stats_basic {
-	__u64	bytes;
-	__u32	packets;
-};
-struct gnet_stats_basic_packed {
-	__u64	bytes;
-	__u32	packets;
-} __attribute__ ((packed));
-
-/**
- * struct gnet_stats_rate_est - rate estimator
- * @bps: current byte rate
- * @pps: current packet rate
- */
-struct gnet_stats_rate_est {
-	__u32	bps;
-	__u32	pps;
-};
-
-/**
- * struct gnet_stats_queue - queuing statistics
- * @qlen: queue length
- * @backlog: backlog size of queue
- * @drops: number of dropped packets
- * @requeues: number of requeues
- * @overlimits: number of enqueues over the limit
- */
-struct gnet_stats_queue {
-	__u32	qlen;
-	__u32	backlog;
-	__u32	drops;
-	__u32	requeues;
-	__u32	overlimits;
-};
-
-/**
- * struct gnet_estimator - rate estimator configuration
- * @interval: sampling period
- * @ewma_log: the log of measurement window weight
- */
-struct gnet_estimator {
-	signed char	interval;
-	unsigned char	ewma_log;
-};
-
-
-#endif /* __LINUX_GEN_STATS_H */
diff --git a/ANDROID_3.4.5/include/linux/genalloc.h b/ANDROID_3.4.5/include/linux/genalloc.h
deleted file mode 100644
index 5e98eeb2..00000000
--- a/ANDROID_3.4.5/include/linux/genalloc.h
+++ /dev/null
@@ -1,81 +0,0 @@
-/*
- * Basic general purpose allocator for managing special purpose
- * memory, for example, memory that is not managed by the regular
- * kmalloc/kfree interface.  Uses for this includes on-device special
- * memory, uncached memory etc.
- *
- * It is safe to use the allocator in NMI handlers and other special
- * unblockable contexts that could otherwise deadlock on locks.  This
- * is implemented by using atomic operations and retries on any
- * conflicts.  The disadvantage is that there may be livelocks in
- * extreme cases.  For better scalability, one allocator can be used
- * for each CPU.
- *
- * The lockless operation only works if there is enough memory
- * available.  If new memory is added to the pool a lock has to be
- * still taken.  So any user relying on locklessness has to ensure
- * that sufficient memory is preallocated.
- *
- * The basic atomic operation of this allocator is cmpxchg on long.
- * On architectures that don't have NMI-safe cmpxchg implementation,
- * the allocator can NOT be used in NMI handler.  So code uses the
- * allocator in NMI handler should depend on
- * CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG.
- *
- * This source code is licensed under the GNU General Public License,
- * Version 2.  See the file COPYING for more details.
- */
-
-
-#ifndef __GENALLOC_H__
-#define __GENALLOC_H__
-/*
- *  General purpose special memory pool descriptor.
- */
-struct gen_pool {
-	spinlock_t lock;
-	struct list_head chunks;	/* list of chunks in this pool */
-	int min_alloc_order;		/* minimum allocation order */
-};
-
-/*
- *  General purpose special memory pool chunk descriptor.
- */
-struct gen_pool_chunk {
-	struct list_head next_chunk;	/* next chunk in pool */
-	atomic_t avail;
-	phys_addr_t phys_addr;		/* physical starting address of memory chunk */
-	unsigned long start_addr;	/* starting address of memory chunk */
-	unsigned long end_addr;		/* ending address of memory chunk */
-	unsigned long bits[0];		/* bitmap for allocating memory chunk */
-};
-
-extern struct gen_pool *gen_pool_create(int, int);
-extern phys_addr_t gen_pool_virt_to_phys(struct gen_pool *pool, unsigned long);
-extern int gen_pool_add_virt(struct gen_pool *, unsigned long, phys_addr_t,
-			     size_t, int);
-/**
- * gen_pool_add - add a new chunk of special memory to the pool
- * @pool: pool to add new memory chunk to
- * @addr: starting address of memory chunk to add to pool
- * @size: size in bytes of the memory chunk to add to pool
- * @nid: node id of the node the chunk structure and bitmap should be
- *       allocated on, or -1
- *
- * Add a new chunk of special memory to the specified pool.
- *
- * Returns 0 on success or a -ve errno on failure.
- */
-static inline int gen_pool_add(struct gen_pool *pool, unsigned long addr,
-			       size_t size, int nid)
-{
-	return gen_pool_add_virt(pool, addr, -1, size, nid);
-}
-extern void gen_pool_destroy(struct gen_pool *);
-extern unsigned long gen_pool_alloc(struct gen_pool *, size_t);
-extern void gen_pool_free(struct gen_pool *, unsigned long, size_t);
-extern void gen_pool_for_each_chunk(struct gen_pool *,
-	void (*)(struct gen_pool *, struct gen_pool_chunk *, void *), void *);
-extern size_t gen_pool_avail(struct gen_pool *);
-extern size_t gen_pool_size(struct gen_pool *);
-#endif /* __GENALLOC_H__ */
diff --git a/ANDROID_3.4.5/include/linux/generic_acl.h b/ANDROID_3.4.5/include/linux/generic_acl.h
deleted file mode 100644
index b6d65754..00000000
--- a/ANDROID_3.4.5/include/linux/generic_acl.h
+++ /dev/null
@@ -1,14 +0,0 @@
-#ifndef LINUX_GENERIC_ACL_H
-#define LINUX_GENERIC_ACL_H
-
-#include <linux/xattr.h>
-
-struct inode;
-
-extern const struct xattr_handler generic_acl_access_handler;
-extern const struct xattr_handler generic_acl_default_handler;
-
-int generic_acl_init(struct inode *, struct inode *);
-int generic_acl_chmod(struct inode *);
-
-#endif /* LINUX_GENERIC_ACL_H */
diff --git a/ANDROID_3.4.5/include/linux/generic_serial.h b/ANDROID_3.4.5/include/linux/generic_serial.h
deleted file mode 100644
index fadff285..00000000
--- a/ANDROID_3.4.5/include/linux/generic_serial.h
+++ /dev/null
@@ -1,95 +0,0 @@
-/*
- *  generic_serial.h
- *
- *  Copyright (C) 1998 R.E.Wolff@BitWizard.nl
- *
- *  written for the SX serial driver.
- *     Contains the code that should be shared over all the serial drivers.
- *
- *  Version 0.1 -- December, 1998.
- */
-
-#ifndef GENERIC_SERIAL_H
-#define GENERIC_SERIAL_H
-
-#ifdef __KERNEL__
-#include <linux/mutex.h>
-#include <linux/tty.h>
-
-struct real_driver {
-  void                    (*disable_tx_interrupts) (void *);
-  void                    (*enable_tx_interrupts) (void *);
-  void                    (*disable_rx_interrupts) (void *);
-  void                    (*enable_rx_interrupts) (void *);
-  void                    (*shutdown_port) (void*);
-  int                     (*set_real_termios) (void*);
-  int                     (*chars_in_buffer) (void*);
-  void                    (*close) (void*);
-  void                    (*hungup) (void*);
-  void                    (*getserial) (void*, struct serial_struct *sp);
-};
-
-
-
-struct gs_port {
-  int                     magic;
-  struct tty_port	  port;
-  unsigned char           *xmit_buf; 
-  int                     xmit_head;
-  int                     xmit_tail;
-  int                     xmit_cnt;
-  struct mutex            port_write_mutex;
-  unsigned long           event;
-  unsigned short          closing_wait;
-  int                     close_delay;
-  struct real_driver      *rd;
-  int                     wakeup_chars;
-  int                     baud_base;
-  int                     baud;
-  int                     custom_divisor;
-  spinlock_t              driver_lock;
-};
-
-#endif /* __KERNEL__ */
-
-/* Flags */
-/* Warning: serial.h defines some ASYNC_ flags, they say they are "only"
-   used in serial.c, but they are also used in all other serial drivers. 
-   Make sure they don't clash with these here... */
-#define GS_TX_INTEN      0x00800000
-#define GS_RX_INTEN      0x00400000
-#define GS_ACTIVE        0x00200000
-
-
-
-#define GS_TYPE_NORMAL   1
-
-#define GS_DEBUG_FLUSH   0x00000001
-#define GS_DEBUG_BTR     0x00000002
-#define GS_DEBUG_TERMIOS 0x00000004
-#define GS_DEBUG_STUFF   0x00000008
-#define GS_DEBUG_CLOSE   0x00000010
-#define GS_DEBUG_FLOW    0x00000020
-#define GS_DEBUG_WRITE   0x00000040
-
-#ifdef __KERNEL__
-int gs_put_char(struct tty_struct *tty, unsigned char ch);
-int  gs_write(struct tty_struct *tty, 
-             const unsigned char *buf, int count);
-int  gs_write_room(struct tty_struct *tty);
-int  gs_chars_in_buffer(struct tty_struct *tty);
-void gs_flush_buffer(struct tty_struct *tty);
-void gs_flush_chars(struct tty_struct *tty);
-void gs_stop(struct tty_struct *tty);
-void gs_start(struct tty_struct *tty);
-void gs_hangup(struct tty_struct *tty);
-int  gs_block_til_ready(void *port, struct file *filp);
-void gs_close(struct tty_struct *tty, struct file *filp);
-void gs_set_termios (struct tty_struct * tty, 
-                     struct ktermios * old_termios);
-int  gs_init_port(struct gs_port *port);
-int  gs_setserial(struct gs_port *port, struct serial_struct __user *sp);
-int  gs_getserial(struct gs_port *port, struct serial_struct __user *sp);
-void gs_got_break(struct gs_port *port);
-#endif /* __KERNEL__ */
-#endif
diff --git a/ANDROID_3.4.5/include/linux/genetlink.h b/ANDROID_3.4.5/include/linux/genetlink.h
deleted file mode 100644
index 73c28dea..00000000
--- a/ANDROID_3.4.5/include/linux/genetlink.h
+++ /dev/null
@@ -1,115 +0,0 @@
-#ifndef __LINUX_GENERIC_NETLINK_H
-#define __LINUX_GENERIC_NETLINK_H
-
-#include <linux/types.h>
-#include <linux/netlink.h>
-
-#define GENL_NAMSIZ	16	/* length of family name */
-
-#define GENL_MIN_ID	NLMSG_MIN_TYPE
-#define GENL_MAX_ID	1023
-
-struct genlmsghdr {
-	__u8	cmd;
-	__u8	version;
-	__u16	reserved;
-};
-
-#define GENL_HDRLEN	NLMSG_ALIGN(sizeof(struct genlmsghdr))
-
-#define GENL_ADMIN_PERM		0x01
-#define GENL_CMD_CAP_DO		0x02
-#define GENL_CMD_CAP_DUMP	0x04
-#define GENL_CMD_CAP_HASPOL	0x08
-
-/*
- * List of reserved static generic netlink identifiers:
- */
-#define GENL_ID_GENERATE	0
-#define GENL_ID_CTRL		NLMSG_MIN_TYPE
-
-/**************************************************************************
- * Controller
- **************************************************************************/
-
-enum {
-	CTRL_CMD_UNSPEC,
-	CTRL_CMD_NEWFAMILY,
-	CTRL_CMD_DELFAMILY,
-	CTRL_CMD_GETFAMILY,
-	CTRL_CMD_NEWOPS,
-	CTRL_CMD_DELOPS,
-	CTRL_CMD_GETOPS,
-	CTRL_CMD_NEWMCAST_GRP,
-	CTRL_CMD_DELMCAST_GRP,
-	CTRL_CMD_GETMCAST_GRP, /* unused */
-	__CTRL_CMD_MAX,
-};
-
-#define CTRL_CMD_MAX (__CTRL_CMD_MAX - 1)
-
-enum {
-	CTRL_ATTR_UNSPEC,
-	CTRL_ATTR_FAMILY_ID,
-	CTRL_ATTR_FAMILY_NAME,
-	CTRL_ATTR_VERSION,
-	CTRL_ATTR_HDRSIZE,
-	CTRL_ATTR_MAXATTR,
-	CTRL_ATTR_OPS,
-	CTRL_ATTR_MCAST_GROUPS,
-	__CTRL_ATTR_MAX,
-};
-
-#define CTRL_ATTR_MAX (__CTRL_ATTR_MAX - 1)
-
-enum {
-	CTRL_ATTR_OP_UNSPEC,
-	CTRL_ATTR_OP_ID,
-	CTRL_ATTR_OP_FLAGS,
-	__CTRL_ATTR_OP_MAX,
-};
-
-#define CTRL_ATTR_OP_MAX (__CTRL_ATTR_OP_MAX - 1)
-
-enum {
-	CTRL_ATTR_MCAST_GRP_UNSPEC,
-	CTRL_ATTR_MCAST_GRP_NAME,
-	CTRL_ATTR_MCAST_GRP_ID,
-	__CTRL_ATTR_MCAST_GRP_MAX,
-};
-
-#define CTRL_ATTR_MCAST_GRP_MAX (__CTRL_ATTR_MCAST_GRP_MAX - 1)
-
-#ifdef __KERNEL__
-
-/* All generic netlink requests are serialized by a global lock.  */
-extern void genl_lock(void);
-extern void genl_unlock(void);
-#ifdef CONFIG_PROVE_LOCKING
-extern int lockdep_genl_is_held(void);
-#endif
-
-/**
- * rcu_dereference_genl - rcu_dereference with debug checking
- * @p: The pointer to read, prior to dereferencing
- *
- * Do an rcu_dereference(p), but check caller either holds rcu_read_lock()
- * or genl mutex. Note : Please prefer genl_dereference() or rcu_dereference()
- */
-#define rcu_dereference_genl(p)					\
-	rcu_dereference_check(p, lockdep_genl_is_held())
-
-/**
- * genl_dereference - fetch RCU pointer when updates are prevented by genl mutex
- * @p: The pointer to read, prior to dereferencing
- *
- * Return the value of the specified RCU-protected pointer, but omit
- * both the smp_read_barrier_depends() and the ACCESS_ONCE(), because
- * caller holds genl mutex.
- */
-#define genl_dereference(p)					\
-	rcu_dereference_protected(p, lockdep_genl_is_held())
-
-#endif /* __KERNEL__ */
-
-#endif	/* __LINUX_GENERIC_NETLINK_H */
diff --git a/ANDROID_3.4.5/include/linux/genhd.h b/ANDROID_3.4.5/include/linux/genhd.h
deleted file mode 100644
index 017a7fb5..00000000
--- a/ANDROID_3.4.5/include/linux/genhd.h
+++ /dev/null
@@ -1,663 +0,0 @@
-#ifndef _LINUX_GENHD_H
-#define _LINUX_GENHD_H
-
-/*
- * 	genhd.h Copyright (C) 1992 Drew Eckhardt
- *	Generic hard disk header file by  
- * 		Drew Eckhardt
- *
- *		<drew@colorado.edu>
- */
-
-#include <linux/types.h>
-#include <linux/kdev_t.h>
-#include <linux/rcupdate.h>
-#include <linux/slab.h>
-
-#ifdef CONFIG_BLOCK
-
-#define kobj_to_dev(k)		container_of((k), struct device, kobj)
-#define dev_to_disk(device)	container_of((device), struct gendisk, part0.__dev)
-#define dev_to_part(device)	container_of((device), struct hd_struct, __dev)
-#define disk_to_dev(disk)	(&(disk)->part0.__dev)
-#define part_to_dev(part)	(&((part)->__dev))
-
-extern struct device_type part_type;
-extern struct kobject *block_depr;
-extern struct class block_class;
-
-enum {
-/* These three have identical behaviour; use the second one if DOS FDISK gets
-   confused about extended/logical partitions starting past cylinder 1023. */
-	DOS_EXTENDED_PARTITION = 5,
-	LINUX_EXTENDED_PARTITION = 0x85,
-	WIN98_EXTENDED_PARTITION = 0x0f,
-
-	SUN_WHOLE_DISK = DOS_EXTENDED_PARTITION,
-
-	LINUX_SWAP_PARTITION = 0x82,
-	LINUX_DATA_PARTITION = 0x83,
-	LINUX_LVM_PARTITION = 0x8e,
-	LINUX_RAID_PARTITION = 0xfd,	/* autodetect RAID partition */
-
-	SOLARIS_X86_PARTITION =	LINUX_SWAP_PARTITION,
-	NEW_SOLARIS_X86_PARTITION = 0xbf,
-
-	DM6_AUX1PARTITION = 0x51,	/* no DDO:  use xlated geom */
-	DM6_AUX3PARTITION = 0x53,	/* no DDO:  use xlated geom */
-	DM6_PARTITION =	0x54,		/* has DDO: use xlated geom & offset */
-	EZD_PARTITION =	0x55,		/* EZ-DRIVE */
-
-	FREEBSD_PARTITION = 0xa5,	/* FreeBSD Partition ID */
-	OPENBSD_PARTITION = 0xa6,	/* OpenBSD Partition ID */
-	NETBSD_PARTITION = 0xa9,	/* NetBSD Partition ID */
-	BSDI_PARTITION = 0xb7,		/* BSDI Partition ID */
-	MINIX_PARTITION = 0x81,		/* Minix Partition ID */
-	UNIXWARE_PARTITION = 0x63,	/* Same as GNU_HURD and SCO Unix */
-};
-
-#define DISK_MAX_PARTS			256
-#define DISK_NAME_LEN			32
-
-#include <linux/major.h>
-#include <linux/device.h>
-#include <linux/smp.h>
-#include <linux/string.h>
-#include <linux/fs.h>
-#include <linux/workqueue.h>
-
-struct partition {
-	unsigned char boot_ind;		/* 0x80 - active */
-	unsigned char head;		/* starting head */
-	unsigned char sector;		/* starting sector */
-	unsigned char cyl;		/* starting cylinder */
-	unsigned char sys_ind;		/* What partition type */
-	unsigned char end_head;		/* end head */
-	unsigned char end_sector;	/* end sector */
-	unsigned char end_cyl;		/* end cylinder */
-	__le32 start_sect;	/* starting sector counting from 0 */
-	__le32 nr_sects;		/* nr of sectors in partition */
-} __attribute__((packed));
-
-struct disk_stats {
-	unsigned long sectors[2];	/* READs and WRITEs */
-	unsigned long ios[2];
-	unsigned long merges[2];
-	unsigned long ticks[2];
-	unsigned long io_ticks;
-	unsigned long time_in_queue;
-};
-
-#define PARTITION_META_INFO_VOLNAMELTH	64
-#define PARTITION_META_INFO_UUIDLTH	16
-
-struct partition_meta_info {
-	u8 uuid[PARTITION_META_INFO_UUIDLTH];	/* always big endian */
-	u8 volname[PARTITION_META_INFO_VOLNAMELTH];
-};
-
-struct hd_struct {
-	sector_t start_sect;
-	sector_t nr_sects;
-	sector_t alignment_offset;
-	unsigned int discard_alignment;
-	struct device __dev;
-	struct kobject *holder_dir;
-	int policy, partno;
-	struct partition_meta_info *info;
-#ifdef CONFIG_FAIL_MAKE_REQUEST
-	int make_it_fail;
-#endif
-	unsigned long stamp;
-	atomic_t in_flight[2];
-#ifdef	CONFIG_SMP
-	struct disk_stats __percpu *dkstats;
-#else
-	struct disk_stats dkstats;
-#endif
-	atomic_t ref;
-	struct rcu_head rcu_head;
-};
-
-#define GENHD_FL_REMOVABLE			1
-/* 2 is unused */
-#define GENHD_FL_MEDIA_CHANGE_NOTIFY		4
-#define GENHD_FL_CD				8
-#define GENHD_FL_UP				16
-#define GENHD_FL_SUPPRESS_PARTITION_INFO	32
-#define GENHD_FL_EXT_DEVT			64 /* allow extended devt */
-#define GENHD_FL_NATIVE_CAPACITY		128
-#define GENHD_FL_BLOCK_EVENTS_ON_EXCL_WRITE	256
-#define GENHD_FL_NO_PART_SCAN			512
-
-enum {
-	DISK_EVENT_MEDIA_CHANGE			= 1 << 0, /* media changed */
-	DISK_EVENT_EJECT_REQUEST		= 1 << 1, /* eject requested */
-};
-
-#define BLK_SCSI_MAX_CMDS	(256)
-#define BLK_SCSI_CMD_PER_LONG	(BLK_SCSI_MAX_CMDS / (sizeof(long) * 8))
-
-struct blk_scsi_cmd_filter {
-	unsigned long read_ok[BLK_SCSI_CMD_PER_LONG];
-	unsigned long write_ok[BLK_SCSI_CMD_PER_LONG];
-	struct kobject kobj;
-};
-
-struct disk_part_tbl {
-	struct rcu_head rcu_head;
-	int len;
-	struct hd_struct __rcu *last_lookup;
-	struct hd_struct __rcu *part[];
-};
-
-struct disk_events;
-
-struct gendisk {
-	/* major, first_minor and minors are input parameters only,
-	 * don't use directly.  Use disk_devt() and disk_max_parts().
-	 */
-	int major;			/* major number of driver */
-	int first_minor;
-	int minors;                     /* maximum number of minors, =1 for
-                                         * disks that can't be partitioned. */
-
-	char disk_name[DISK_NAME_LEN];	/* name of major driver */
-	char *(*devnode)(struct gendisk *gd, umode_t *mode);
-
-	unsigned int events;		/* supported events */
-	unsigned int async_events;	/* async events, subset of all */
-
-	/* Array of pointers to partitions indexed by partno.
-	 * Protected with matching bdev lock but stat and other
-	 * non-critical accesses use RCU.  Always access through
-	 * helpers.
-	 */
-	struct disk_part_tbl __rcu *part_tbl;
-	struct hd_struct part0;
-
-	const struct block_device_operations *fops;
-	struct request_queue *queue;
-	void *private_data;
-
-	int flags;
-	struct device *driverfs_dev;  // FIXME: remove
-	struct kobject *slave_dir;
-
-	struct timer_rand_state *random;
-	atomic_t sync_io;		/* RAID */
-	struct disk_events *ev;
-#ifdef  CONFIG_BLK_DEV_INTEGRITY
-	struct blk_integrity *integrity;
-#endif
-	int node_id;
-};
-
-static inline struct gendisk *part_to_disk(struct hd_struct *part)
-{
-	if (likely(part)) {
-		if (part->partno)
-			return dev_to_disk(part_to_dev(part)->parent);
-		else
-			return dev_to_disk(part_to_dev(part));
-	}
-	return NULL;
-}
-
-static inline void part_pack_uuid(const u8 *uuid_str, u8 *to)
-{
-	int i;
-	for (i = 0; i < 16; ++i) {
-		*to++ = (hex_to_bin(*uuid_str) << 4) |
-			(hex_to_bin(*(uuid_str + 1)));
-		uuid_str += 2;
-		switch (i) {
-		case 3:
-		case 5:
-		case 7:
-		case 9:
-			uuid_str++;
-			continue;
-		}
-	}
-}
-
-static inline int disk_max_parts(struct gendisk *disk)
-{
-	if (disk->flags & GENHD_FL_EXT_DEVT)
-		return DISK_MAX_PARTS;
-	return disk->minors;
-}
-
-static inline bool disk_part_scan_enabled(struct gendisk *disk)
-{
-	return disk_max_parts(disk) > 1 &&
-		!(disk->flags & GENHD_FL_NO_PART_SCAN);
-}
-
-static inline dev_t disk_devt(struct gendisk *disk)
-{
-	return disk_to_dev(disk)->devt;
-}
-
-static inline dev_t part_devt(struct hd_struct *part)
-{
-	return part_to_dev(part)->devt;
-}
-
-extern struct hd_struct *disk_get_part(struct gendisk *disk, int partno);
-
-static inline void disk_put_part(struct hd_struct *part)
-{
-	if (likely(part))
-		put_device(part_to_dev(part));
-}
-
-/*
- * Smarter partition iterator without context limits.
- */
-#define DISK_PITER_REVERSE	(1 << 0) /* iterate in the reverse direction */
-#define DISK_PITER_INCL_EMPTY	(1 << 1) /* include 0-sized parts */
-#define DISK_PITER_INCL_PART0	(1 << 2) /* include partition 0 */
-#define DISK_PITER_INCL_EMPTY_PART0 (1 << 3) /* include empty partition 0 */
-
-struct disk_part_iter {
-	struct gendisk		*disk;
-	struct hd_struct	*part;
-	int			idx;
-	unsigned int		flags;
-};
-
-extern void disk_part_iter_init(struct disk_part_iter *piter,
-				 struct gendisk *disk, unsigned int flags);
-extern struct hd_struct *disk_part_iter_next(struct disk_part_iter *piter);
-extern void disk_part_iter_exit(struct disk_part_iter *piter);
-
-extern struct hd_struct *disk_map_sector_rcu(struct gendisk *disk,
-					     sector_t sector);
-
-/*
- * Macros to operate on percpu disk statistics:
- *
- * {disk|part|all}_stat_{add|sub|inc|dec}() modify the stat counters
- * and should be called between disk_stat_lock() and
- * disk_stat_unlock().
- *
- * part_stat_read() can be called at any time.
- *
- * part_stat_{add|set_all}() and {init|free}_part_stats are for
- * internal use only.
- */
-#ifdef	CONFIG_SMP
-#define part_stat_lock()	({ rcu_read_lock(); get_cpu(); })
-#define part_stat_unlock()	do { put_cpu(); rcu_read_unlock(); } while (0)
-
-#define __part_stat_add(cpu, part, field, addnd)			\
-	(per_cpu_ptr((part)->dkstats, (cpu))->field += (addnd))
-
-#define part_stat_read(part, field)					\
-({									\
-	typeof((part)->dkstats->field) res = 0;				\
-	unsigned int _cpu;						\
-	for_each_possible_cpu(_cpu)					\
-		res += per_cpu_ptr((part)->dkstats, _cpu)->field;	\
-	res;								\
-})
-
-static inline void part_stat_set_all(struct hd_struct *part, int value)
-{
-	int i;
-
-	for_each_possible_cpu(i)
-		memset(per_cpu_ptr(part->dkstats, i), value,
-				sizeof(struct disk_stats));
-}
-
-static inline int init_part_stats(struct hd_struct *part)
-{
-	part->dkstats = alloc_percpu(struct disk_stats);
-	if (!part->dkstats)
-		return 0;
-	return 1;
-}
-
-static inline void free_part_stats(struct hd_struct *part)
-{
-	free_percpu(part->dkstats);
-}
-
-#else /* !CONFIG_SMP */
-#define part_stat_lock()	({ rcu_read_lock(); 0; })
-#define part_stat_unlock()	rcu_read_unlock()
-
-#define __part_stat_add(cpu, part, field, addnd)				\
-	((part)->dkstats.field += addnd)
-
-#define part_stat_read(part, field)	((part)->dkstats.field)
-
-static inline void part_stat_set_all(struct hd_struct *part, int value)
-{
-	memset(&part->dkstats, value, sizeof(struct disk_stats));
-}
-
-static inline int init_part_stats(struct hd_struct *part)
-{
-	return 1;
-}
-
-static inline void free_part_stats(struct hd_struct *part)
-{
-}
-
-#endif /* CONFIG_SMP */
-
-#define part_stat_add(cpu, part, field, addnd)	do {			\
-	__part_stat_add((cpu), (part), field, addnd);			\
-	if ((part)->partno)						\
-		__part_stat_add((cpu), &part_to_disk((part))->part0,	\
-				field, addnd);				\
-} while (0)
-
-#define part_stat_dec(cpu, gendiskp, field)				\
-	part_stat_add(cpu, gendiskp, field, -1)
-#define part_stat_inc(cpu, gendiskp, field)				\
-	part_stat_add(cpu, gendiskp, field, 1)
-#define part_stat_sub(cpu, gendiskp, field, subnd)			\
-	part_stat_add(cpu, gendiskp, field, -subnd)
-
-static inline void part_inc_in_flight(struct hd_struct *part, int rw)
-{
-	atomic_inc(&part->in_flight[rw]);
-	if (part->partno)
-		atomic_inc(&part_to_disk(part)->part0.in_flight[rw]);
-}
-
-static inline void part_dec_in_flight(struct hd_struct *part, int rw)
-{
-	atomic_dec(&part->in_flight[rw]);
-	if (part->partno)
-		atomic_dec(&part_to_disk(part)->part0.in_flight[rw]);
-}
-
-static inline int part_in_flight(struct hd_struct *part)
-{
-	return atomic_read(&part->in_flight[0]) + atomic_read(&part->in_flight[1]);
-}
-
-static inline struct partition_meta_info *alloc_part_info(struct gendisk *disk)
-{
-	if (disk)
-		return kzalloc_node(sizeof(struct partition_meta_info),
-				    GFP_KERNEL, disk->node_id);
-	return kzalloc(sizeof(struct partition_meta_info), GFP_KERNEL);
-}
-
-static inline void free_part_info(struct hd_struct *part)
-{
-	kfree(part->info);
-}
-
-/* block/blk-core.c */
-extern void part_round_stats(int cpu, struct hd_struct *part);
-
-/* block/genhd.c */
-extern void add_disk(struct gendisk *disk);
-extern void del_gendisk(struct gendisk *gp);
-extern struct gendisk *get_gendisk(dev_t dev, int *partno);
-extern struct block_device *bdget_disk(struct gendisk *disk, int partno);
-
-extern void set_device_ro(struct block_device *bdev, int flag);
-extern void set_disk_ro(struct gendisk *disk, int flag);
-
-static inline int get_disk_ro(struct gendisk *disk)
-{
-	return disk->part0.policy;
-}
-
-extern void disk_block_events(struct gendisk *disk);
-extern void disk_unblock_events(struct gendisk *disk);
-extern void disk_flush_events(struct gendisk *disk, unsigned int mask);
-extern unsigned int disk_clear_events(struct gendisk *disk, unsigned int mask);
-
-/* drivers/char/random.c */
-extern void add_disk_randomness(struct gendisk *disk);
-extern void rand_initialize_disk(struct gendisk *disk);
-
-static inline sector_t get_start_sect(struct block_device *bdev)
-{
-	return bdev->bd_part->start_sect;
-}
-static inline sector_t get_capacity(struct gendisk *disk)
-{
-	return disk->part0.nr_sects;
-}
-static inline void set_capacity(struct gendisk *disk, sector_t size)
-{
-	disk->part0.nr_sects = size;
-}
-
-#ifdef CONFIG_SOLARIS_X86_PARTITION
-
-#define SOLARIS_X86_NUMSLICE	16
-#define SOLARIS_X86_VTOC_SANE	(0x600DDEEEUL)
-
-struct solaris_x86_slice {
-	__le16 s_tag;		/* ID tag of partition */
-	__le16 s_flag;		/* permission flags */
-	__le32 s_start;		/* start sector no of partition */
-	__le32 s_size;		/* # of blocks in partition */
-};
-
-struct solaris_x86_vtoc {
-	unsigned int v_bootinfo[3];	/* info needed by mboot (unsupported) */
-	__le32 v_sanity;		/* to verify vtoc sanity */
-	__le32 v_version;		/* layout version */
-	char	v_volume[8];		/* volume name */
-	__le16	v_sectorsz;		/* sector size in bytes */
-	__le16	v_nparts;		/* number of partitions */
-	unsigned int v_reserved[10];	/* free space */
-	struct solaris_x86_slice
-		v_slice[SOLARIS_X86_NUMSLICE]; /* slice headers */
-	unsigned int timestamp[SOLARIS_X86_NUMSLICE]; /* timestamp (unsupported) */
-	char	v_asciilabel[128];	/* for compatibility */
-};
-
-#endif /* CONFIG_SOLARIS_X86_PARTITION */
-
-#ifdef CONFIG_BSD_DISKLABEL
-/*
- * BSD disklabel support by Yossi Gottlieb <yogo@math.tau.ac.il>
- * updated by Marc Espie <Marc.Espie@openbsd.org>
- */
-
-/* check against BSD src/sys/sys/disklabel.h for consistency */
-
-#define BSD_DISKMAGIC	(0x82564557UL)	/* The disk magic number */
-#define BSD_MAXPARTITIONS	16
-#define OPENBSD_MAXPARTITIONS	16
-#define BSD_FS_UNUSED		0	/* disklabel unused partition entry ID */
-struct bsd_disklabel {
-	__le32	d_magic;		/* the magic number */
-	__s16	d_type;			/* drive type */
-	__s16	d_subtype;		/* controller/d_type specific */
-	char	d_typename[16];		/* type name, e.g. "eagle" */
-	char	d_packname[16];			/* pack identifier */ 
-	__u32	d_secsize;		/* # of bytes per sector */
-	__u32	d_nsectors;		/* # of data sectors per track */
-	__u32	d_ntracks;		/* # of tracks per cylinder */
-	__u32	d_ncylinders;		/* # of data cylinders per unit */
-	__u32	d_secpercyl;		/* # of data sectors per cylinder */
-	__u32	d_secperunit;		/* # of data sectors per unit */
-	__u16	d_sparespertrack;	/* # of spare sectors per track */
-	__u16	d_sparespercyl;		/* # of spare sectors per cylinder */
-	__u32	d_acylinders;		/* # of alt. cylinders per unit */
-	__u16	d_rpm;			/* rotational speed */
-	__u16	d_interleave;		/* hardware sector interleave */
-	__u16	d_trackskew;		/* sector 0 skew, per track */
-	__u16	d_cylskew;		/* sector 0 skew, per cylinder */
-	__u32	d_headswitch;		/* head switch time, usec */
-	__u32	d_trkseek;		/* track-to-track seek, usec */
-	__u32	d_flags;		/* generic flags */
-#define NDDATA 5
-	__u32	d_drivedata[NDDATA];	/* drive-type specific information */
-#define NSPARE 5
-	__u32	d_spare[NSPARE];	/* reserved for future use */
-	__le32	d_magic2;		/* the magic number (again) */
-	__le16	d_checksum;		/* xor of data incl. partitions */
-
-			/* filesystem and partition information: */
-	__le16	d_npartitions;		/* number of partitions in following */
-	__le32	d_bbsize;		/* size of boot area at sn0, bytes */
-	__le32	d_sbsize;		/* max size of fs superblock, bytes */
-	struct	bsd_partition {		/* the partition table */
-		__le32	p_size;		/* number of sectors in partition */
-		__le32	p_offset;	/* starting sector */
-		__le32	p_fsize;	/* filesystem basic fragment size */
-		__u8	p_fstype;	/* filesystem type, see below */
-		__u8	p_frag;		/* filesystem fragments per block */
-		__le16	p_cpg;		/* filesystem cylinders per group */
-	} d_partitions[BSD_MAXPARTITIONS];	/* actually may be more */
-};
-
-#endif	/* CONFIG_BSD_DISKLABEL */
-
-#ifdef CONFIG_UNIXWARE_DISKLABEL
-/*
- * Unixware slices support by Andrzej Krzysztofowicz <ankry@mif.pg.gda.pl>
- * and Krzysztof G. Baranowski <kgb@knm.org.pl>
- */
-
-#define UNIXWARE_DISKMAGIC     (0xCA5E600DUL)	/* The disk magic number */
-#define UNIXWARE_DISKMAGIC2    (0x600DDEEEUL)	/* The slice table magic nr */
-#define UNIXWARE_NUMSLICE      16
-#define UNIXWARE_FS_UNUSED     0		/* Unused slice entry ID */
-
-struct unixware_slice {
-	__le16   s_label;	/* label */
-	__le16   s_flags;	/* permission flags */
-	__le32   start_sect;	/* starting sector */
-	__le32   nr_sects;	/* number of sectors in slice */
-};
-
-struct unixware_disklabel {
-	__le32   d_type;               	/* drive type */
-	__le32   d_magic;                /* the magic number */
-	__le32   d_version;              /* version number */
-	char    d_serial[12];           /* serial number of the device */
-	__le32   d_ncylinders;           /* # of data cylinders per device */
-	__le32   d_ntracks;              /* # of tracks per cylinder */
-	__le32   d_nsectors;             /* # of data sectors per track */
-	__le32   d_secsize;              /* # of bytes per sector */
-	__le32   d_part_start;           /* # of first sector of this partition */
-	__le32   d_unknown1[12];         /* ? */
- 	__le32	d_alt_tbl;              /* byte offset of alternate table */
- 	__le32	d_alt_len;              /* byte length of alternate table */
- 	__le32	d_phys_cyl;             /* # of physical cylinders per device */
- 	__le32	d_phys_trk;             /* # of physical tracks per cylinder */
- 	__le32	d_phys_sec;             /* # of physical sectors per track */
- 	__le32	d_phys_bytes;           /* # of physical bytes per sector */
- 	__le32	d_unknown2;             /* ? */
-	__le32   d_unknown3;             /* ? */
-	__le32	d_pad[8];               /* pad */
-
-	struct unixware_vtoc {
-		__le32	v_magic;		/* the magic number */
-		__le32	v_version;		/* version number */
-		char	v_name[8];		/* volume name */
-		__le16	v_nslices;		/* # of slices */
-		__le16	v_unknown1;		/* ? */
-		__le32	v_reserved[10];		/* reserved */
-		struct unixware_slice
-			v_slice[UNIXWARE_NUMSLICE];	/* slice headers */
-	} vtoc;
-
-};  /* 408 */
-
-#endif /* CONFIG_UNIXWARE_DISKLABEL */
-
-#ifdef CONFIG_MINIX_SUBPARTITION
-#   define MINIX_NR_SUBPARTITIONS  4
-#endif /* CONFIG_MINIX_SUBPARTITION */
-
-#define ADDPART_FLAG_NONE	0
-#define ADDPART_FLAG_RAID	1
-#define ADDPART_FLAG_WHOLEDISK	2
-
-extern int blk_alloc_devt(struct hd_struct *part, dev_t *devt);
-extern void blk_free_devt(dev_t devt);
-extern dev_t blk_lookup_devt(const char *name, int partno);
-extern char *disk_name (struct gendisk *hd, int partno, char *buf);
-
-extern int disk_expand_part_tbl(struct gendisk *disk, int target);
-extern int rescan_partitions(struct gendisk *disk, struct block_device *bdev);
-extern int invalidate_partitions(struct gendisk *disk, struct block_device *bdev);
-extern struct hd_struct * __must_check add_partition(struct gendisk *disk,
-						     int partno, sector_t start,
-						     sector_t len, int flags,
-						     struct partition_meta_info
-						       *info);
-extern void __delete_partition(struct hd_struct *);
-extern void delete_partition(struct gendisk *, int);
-extern void printk_all_partitions(void);
-
-extern struct gendisk *alloc_disk_node(int minors, int node_id);
-extern struct gendisk *alloc_disk(int minors);
-extern struct kobject *get_disk(struct gendisk *disk);
-extern void put_disk(struct gendisk *disk);
-extern void blk_register_region(dev_t devt, unsigned long range,
-			struct module *module,
-			struct kobject *(*probe)(dev_t, int *, void *),
-			int (*lock)(dev_t, void *),
-			void *data);
-extern void blk_unregister_region(dev_t devt, unsigned long range);
-
-extern ssize_t part_size_show(struct device *dev,
-			      struct device_attribute *attr, char *buf);
-extern ssize_t part_stat_show(struct device *dev,
-			      struct device_attribute *attr, char *buf);
-extern ssize_t part_inflight_show(struct device *dev,
-			      struct device_attribute *attr, char *buf);
-#ifdef CONFIG_FAIL_MAKE_REQUEST
-extern ssize_t part_fail_show(struct device *dev,
-			      struct device_attribute *attr, char *buf);
-extern ssize_t part_fail_store(struct device *dev,
-			       struct device_attribute *attr,
-			       const char *buf, size_t count);
-#endif /* CONFIG_FAIL_MAKE_REQUEST */
-
-static inline void hd_ref_init(struct hd_struct *part)
-{
-	atomic_set(&part->ref, 1);
-	smp_mb();
-}
-
-static inline void hd_struct_get(struct hd_struct *part)
-{
-	atomic_inc(&part->ref);
-	smp_mb__after_atomic_inc();
-}
-
-static inline int hd_struct_try_get(struct hd_struct *part)
-{
-	return atomic_inc_not_zero(&part->ref);
-}
-
-static inline void hd_struct_put(struct hd_struct *part)
-{
-	if (atomic_dec_and_test(&part->ref))
-		__delete_partition(part);
-}
-
-#else /* CONFIG_BLOCK */
-
-static inline void printk_all_partitions(void) { }
-
-static inline dev_t blk_lookup_devt(const char *name, int partno)
-{
-	dev_t devt = MKDEV(0, 0);
-	return devt;
-}
-
-#endif /* CONFIG_BLOCK */
-
-#endif /* _LINUX_GENHD_H */
diff --git a/ANDROID_3.4.5/include/linux/getcpu.h b/ANDROID_3.4.5/include/linux/getcpu.h
deleted file mode 100644
index c7372d7a..00000000
--- a/ANDROID_3.4.5/include/linux/getcpu.h
+++ /dev/null
@@ -1,18 +0,0 @@
-#ifndef _LINUX_GETCPU_H
-#define _LINUX_GETCPU_H 1
-
-/* Cache for getcpu() to speed it up. Results might be a short time
-   out of date, but will be faster.
-
-   User programs should not refer to the contents of this structure.
-   I repeat they should not refer to it. If they do they will break
-   in future kernels.
-
-   It is only a private cache for vgetcpu(). It will change in future kernels.
-   The user program must store this information per thread (__thread)
-   If you want 100% accurate information pass NULL instead. */
-struct getcpu_cache {
-	unsigned long blob[128 / sizeof(long)];
-};
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/gfp.h b/ANDROID_3.4.5/include/linux/gfp.h
deleted file mode 100644
index 581e74b7..00000000
--- a/ANDROID_3.4.5/include/linux/gfp.h
+++ /dev/null
@@ -1,394 +0,0 @@
-#ifndef __LINUX_GFP_H
-#define __LINUX_GFP_H
-
-#include <linux/mmzone.h>
-#include <linux/stddef.h>
-#include <linux/linkage.h>
-#include <linux/topology.h>
-#include <linux/mmdebug.h>
-
-struct vm_area_struct;
-
-/* Plain integer GFP bitmasks. Do not use this directly. */
-#define ___GFP_DMA		0x01u
-#define ___GFP_HIGHMEM		0x02u
-#define ___GFP_DMA32		0x04u
-#define ___GFP_MOVABLE		0x08u
-#define ___GFP_WAIT		0x10u
-#define ___GFP_HIGH		0x20u
-#define ___GFP_IO		0x40u
-#define ___GFP_FS		0x80u
-#define ___GFP_COLD		0x100u
-#define ___GFP_NOWARN		0x200u
-#define ___GFP_REPEAT		0x400u
-#define ___GFP_NOFAIL		0x800u
-#define ___GFP_NORETRY		0x1000u
-#define ___GFP_COMP		0x4000u
-#define ___GFP_ZERO		0x8000u
-#define ___GFP_NOMEMALLOC	0x10000u
-#define ___GFP_HARDWALL		0x20000u
-#define ___GFP_THISNODE		0x40000u
-#define ___GFP_RECLAIMABLE	0x80000u
-#ifdef CONFIG_KMEMCHECK
-#define ___GFP_NOTRACK		0x200000u
-#else
-#define ___GFP_NOTRACK		0
-#endif
-#define ___GFP_NO_KSWAPD	0x400000u
-#define ___GFP_OTHER_NODE	0x800000u
-#define ___GFP_WRITE		0x1000000u
-
-/*
- * GFP bitmasks..
- *
- * Zone modifiers (see linux/mmzone.h - low three bits)
- *
- * Do not put any conditional on these. If necessary modify the definitions
- * without the underscores and use them consistently. The definitions here may
- * be used in bit comparisons.
- */
-#define __GFP_DMA	((__force gfp_t)___GFP_DMA)
-#define __GFP_HIGHMEM	((__force gfp_t)___GFP_HIGHMEM)
-#define __GFP_DMA32	((__force gfp_t)___GFP_DMA32)
-#define __GFP_MOVABLE	((__force gfp_t)___GFP_MOVABLE)  /* Page is movable */
-#define GFP_ZONEMASK	(__GFP_DMA|__GFP_HIGHMEM|__GFP_DMA32|__GFP_MOVABLE)
-/*
- * Action modifiers - doesn't change the zoning
- *
- * __GFP_REPEAT: Try hard to allocate the memory, but the allocation attempt
- * _might_ fail.  This depends upon the particular VM implementation.
- *
- * __GFP_NOFAIL: The VM implementation _must_ retry infinitely: the caller
- * cannot handle allocation failures.  This modifier is deprecated and no new
- * users should be added.
- *
- * __GFP_NORETRY: The VM implementation must not retry indefinitely.
- *
- * __GFP_MOVABLE: Flag that this page will be movable by the page migration
- * mechanism or reclaimed
- */
-#define __GFP_WAIT	((__force gfp_t)___GFP_WAIT)	/* Can wait and reschedule? */
-#define __GFP_HIGH	((__force gfp_t)___GFP_HIGH)	/* Should access emergency pools? */
-#define __GFP_IO	((__force gfp_t)___GFP_IO)	/* Can start physical IO? */
-#define __GFP_FS	((__force gfp_t)___GFP_FS)	/* Can call down to low-level FS? */
-#define __GFP_COLD	((__force gfp_t)___GFP_COLD)	/* Cache-cold page required */
-#define __GFP_NOWARN	((__force gfp_t)___GFP_NOWARN)	/* Suppress page allocation failure warning */
-#define __GFP_REPEAT	((__force gfp_t)___GFP_REPEAT)	/* See above */
-#define __GFP_NOFAIL	((__force gfp_t)___GFP_NOFAIL)	/* See above */
-#define __GFP_NORETRY	((__force gfp_t)___GFP_NORETRY) /* See above */
-#define __GFP_COMP	((__force gfp_t)___GFP_COMP)	/* Add compound page metadata */
-#define __GFP_ZERO	((__force gfp_t)___GFP_ZERO)	/* Return zeroed page on success */
-#define __GFP_NOMEMALLOC ((__force gfp_t)___GFP_NOMEMALLOC) /* Don't use emergency reserves */
-#define __GFP_HARDWALL   ((__force gfp_t)___GFP_HARDWALL) /* Enforce hardwall cpuset memory allocs */
-#define __GFP_THISNODE	((__force gfp_t)___GFP_THISNODE)/* No fallback, no policies */
-#define __GFP_RECLAIMABLE ((__force gfp_t)___GFP_RECLAIMABLE) /* Page is reclaimable */
-#define __GFP_NOTRACK	((__force gfp_t)___GFP_NOTRACK)  /* Don't track with kmemcheck */
-
-#define __GFP_NO_KSWAPD	((__force gfp_t)___GFP_NO_KSWAPD)
-#define __GFP_OTHER_NODE ((__force gfp_t)___GFP_OTHER_NODE) /* On behalf of other node */
-#define __GFP_WRITE	((__force gfp_t)___GFP_WRITE)	/* Allocator intends to dirty page */
-
-/*
- * This may seem redundant, but it's a way of annotating false positives vs.
- * allocations that simply cannot be supported (e.g. page tables).
- */
-#define __GFP_NOTRACK_FALSE_POSITIVE (__GFP_NOTRACK)
-
-#define __GFP_BITS_SHIFT 25	/* Room for N __GFP_FOO bits */
-#define __GFP_BITS_MASK ((__force gfp_t)((1 << __GFP_BITS_SHIFT) - 1))
-
-/* This equals 0, but use constants in case they ever change */
-#define GFP_NOWAIT	(GFP_ATOMIC & ~__GFP_HIGH)
-/* GFP_ATOMIC means both !wait (__GFP_WAIT not set) and use emergency pool */
-#define GFP_ATOMIC	(__GFP_HIGH)
-#define GFP_NOIO	(__GFP_WAIT)
-#define GFP_NOFS	(__GFP_WAIT | __GFP_IO)
-#define GFP_KERNEL	(__GFP_WAIT | __GFP_IO | __GFP_FS)
-#define GFP_TEMPORARY	(__GFP_WAIT | __GFP_IO | __GFP_FS | \
-			 __GFP_RECLAIMABLE)
-#define GFP_USER	(__GFP_WAIT | __GFP_IO | __GFP_FS | __GFP_HARDWALL)
-#define GFP_HIGHUSER	(__GFP_WAIT | __GFP_IO | __GFP_FS | __GFP_HARDWALL | \
-			 __GFP_HIGHMEM)
-#define GFP_HIGHUSER_MOVABLE	(__GFP_WAIT | __GFP_IO | __GFP_FS | \
-				 __GFP_HARDWALL | __GFP_HIGHMEM | \
-				 __GFP_MOVABLE)
-#define GFP_IOFS	(__GFP_IO | __GFP_FS)
-#define GFP_TRANSHUGE	(GFP_HIGHUSER_MOVABLE | __GFP_COMP | \
-			 __GFP_NOMEMALLOC | __GFP_NORETRY | __GFP_NOWARN | \
-			 __GFP_NO_KSWAPD)
-
-#ifdef CONFIG_NUMA
-#define GFP_THISNODE	(__GFP_THISNODE | __GFP_NOWARN | __GFP_NORETRY)
-#else
-#define GFP_THISNODE	((__force gfp_t)0)
-#endif
-
-/* This mask makes up all the page movable related flags */
-#define GFP_MOVABLE_MASK (__GFP_RECLAIMABLE|__GFP_MOVABLE)
-
-/* Control page allocator reclaim behavior */
-#define GFP_RECLAIM_MASK (__GFP_WAIT|__GFP_HIGH|__GFP_IO|__GFP_FS|\
-			__GFP_NOWARN|__GFP_REPEAT|__GFP_NOFAIL|\
-			__GFP_NORETRY|__GFP_NOMEMALLOC)
-
-/* Control slab gfp mask during early boot */
-#define GFP_BOOT_MASK (__GFP_BITS_MASK & ~(__GFP_WAIT|__GFP_IO|__GFP_FS))
-
-/* Control allocation constraints */
-#define GFP_CONSTRAINT_MASK (__GFP_HARDWALL|__GFP_THISNODE)
-
-/* Do not use these with a slab allocator */
-#define GFP_SLAB_BUG_MASK (__GFP_DMA32|__GFP_HIGHMEM|~__GFP_BITS_MASK)
-
-/* Flag - indicates that the buffer will be suitable for DMA.  Ignored on some
-   platforms, used as appropriate on others */
-
-#define GFP_DMA		__GFP_DMA
-
-/* 4GB DMA on some platforms */
-#define GFP_DMA32	__GFP_DMA32
-
-/* Convert GFP flags to their corresponding migrate type */
-static inline int allocflags_to_migratetype(gfp_t gfp_flags)
-{
-	WARN_ON((gfp_flags & GFP_MOVABLE_MASK) == GFP_MOVABLE_MASK);
-
-	if (unlikely(page_group_by_mobility_disabled))
-		return MIGRATE_UNMOVABLE;
-
-	/* Group based on mobility */
-	return (((gfp_flags & __GFP_MOVABLE) != 0) << 1) |
-		((gfp_flags & __GFP_RECLAIMABLE) != 0);
-}
-
-#ifdef CONFIG_HIGHMEM
-#define OPT_ZONE_HIGHMEM ZONE_HIGHMEM
-#else
-#define OPT_ZONE_HIGHMEM ZONE_NORMAL
-#endif
-
-#ifdef CONFIG_ZONE_DMA
-#define OPT_ZONE_DMA ZONE_DMA
-#else
-#define OPT_ZONE_DMA ZONE_NORMAL
-#endif
-
-#ifdef CONFIG_ZONE_DMA32
-#define OPT_ZONE_DMA32 ZONE_DMA32
-#else
-#define OPT_ZONE_DMA32 ZONE_NORMAL
-#endif
-
-/*
- * GFP_ZONE_TABLE is a word size bitstring that is used for looking up the
- * zone to use given the lowest 4 bits of gfp_t. Entries are ZONE_SHIFT long
- * and there are 16 of them to cover all possible combinations of
- * __GFP_DMA, __GFP_DMA32, __GFP_MOVABLE and __GFP_HIGHMEM.
- *
- * The zone fallback order is MOVABLE=>HIGHMEM=>NORMAL=>DMA32=>DMA.
- * But GFP_MOVABLE is not only a zone specifier but also an allocation
- * policy. Therefore __GFP_MOVABLE plus another zone selector is valid.
- * Only 1 bit of the lowest 3 bits (DMA,DMA32,HIGHMEM) can be set to "1".
- *
- *       bit       result
- *       =================
- *       0x0    => NORMAL
- *       0x1    => DMA or NORMAL
- *       0x2    => HIGHMEM or NORMAL
- *       0x3    => BAD (DMA+HIGHMEM)
- *       0x4    => DMA32 or DMA or NORMAL
- *       0x5    => BAD (DMA+DMA32)
- *       0x6    => BAD (HIGHMEM+DMA32)
- *       0x7    => BAD (HIGHMEM+DMA32+DMA)
- *       0x8    => NORMAL (MOVABLE+0)
- *       0x9    => DMA or NORMAL (MOVABLE+DMA)
- *       0xa    => MOVABLE (Movable is valid only if HIGHMEM is set too)
- *       0xb    => BAD (MOVABLE+HIGHMEM+DMA)
- *       0xc    => DMA32 (MOVABLE+HIGHMEM+DMA32)
- *       0xd    => BAD (MOVABLE+DMA32+DMA)
- *       0xe    => BAD (MOVABLE+DMA32+HIGHMEM)
- *       0xf    => BAD (MOVABLE+DMA32+HIGHMEM+DMA)
- *
- * ZONES_SHIFT must be <= 2 on 32 bit platforms.
- */
-
-#if 16 * ZONES_SHIFT > BITS_PER_LONG
-#error ZONES_SHIFT too large to create GFP_ZONE_TABLE integer
-#endif
-
-#define GFP_ZONE_TABLE ( \
-	(ZONE_NORMAL << 0 * ZONES_SHIFT)				      \
-	| (OPT_ZONE_DMA << ___GFP_DMA * ZONES_SHIFT)			      \
-	| (OPT_ZONE_HIGHMEM << ___GFP_HIGHMEM * ZONES_SHIFT)		      \
-	| (OPT_ZONE_DMA32 << ___GFP_DMA32 * ZONES_SHIFT)		      \
-	| (ZONE_NORMAL << ___GFP_MOVABLE * ZONES_SHIFT)			      \
-	| (OPT_ZONE_DMA << (___GFP_MOVABLE | ___GFP_DMA) * ZONES_SHIFT)	      \
-	| (ZONE_MOVABLE << (___GFP_MOVABLE | ___GFP_HIGHMEM) * ZONES_SHIFT)   \
-	| (OPT_ZONE_DMA32 << (___GFP_MOVABLE | ___GFP_DMA32) * ZONES_SHIFT)   \
-)
-
-/*
- * GFP_ZONE_BAD is a bitmap for all combinations of __GFP_DMA, __GFP_DMA32
- * __GFP_HIGHMEM and __GFP_MOVABLE that are not permitted. One flag per
- * entry starting with bit 0. Bit is set if the combination is not
- * allowed.
- */
-#define GFP_ZONE_BAD ( \
-	1 << (___GFP_DMA | ___GFP_HIGHMEM)				      \
-	| 1 << (___GFP_DMA | ___GFP_DMA32)				      \
-	| 1 << (___GFP_DMA32 | ___GFP_HIGHMEM)				      \
-	| 1 << (___GFP_DMA | ___GFP_DMA32 | ___GFP_HIGHMEM)		      \
-	| 1 << (___GFP_MOVABLE | ___GFP_HIGHMEM | ___GFP_DMA)		      \
-	| 1 << (___GFP_MOVABLE | ___GFP_DMA32 | ___GFP_DMA)		      \
-	| 1 << (___GFP_MOVABLE | ___GFP_DMA32 | ___GFP_HIGHMEM)		      \
-	| 1 << (___GFP_MOVABLE | ___GFP_DMA32 | ___GFP_DMA | ___GFP_HIGHMEM)  \
-)
-
-static inline enum zone_type gfp_zone(gfp_t flags)
-{
-	enum zone_type z;
-	int bit = (__force int) (flags & GFP_ZONEMASK);
-
-	z = (GFP_ZONE_TABLE >> (bit * ZONES_SHIFT)) &
-					 ((1 << ZONES_SHIFT) - 1);
-	VM_BUG_ON((GFP_ZONE_BAD >> bit) & 1);
-	return z;
-}
-
-/*
- * There is only one page-allocator function, and two main namespaces to
- * it. The alloc_page*() variants return 'struct page *' and as such
- * can allocate highmem pages, the *get*page*() variants return
- * virtual kernel addresses to the allocated page(s).
- */
-
-static inline int gfp_zonelist(gfp_t flags)
-{
-	if (NUMA_BUILD && unlikely(flags & __GFP_THISNODE))
-		return 1;
-
-	return 0;
-}
-
-/*
- * We get the zone list from the current node and the gfp_mask.
- * This zone list contains a maximum of MAXNODES*MAX_NR_ZONES zones.
- * There are two zonelists per node, one for all zones with memory and
- * one containing just zones from the node the zonelist belongs to.
- *
- * For the normal case of non-DISCONTIGMEM systems the NODE_DATA() gets
- * optimized to &contig_page_data at compile-time.
- */
-static inline struct zonelist *node_zonelist(int nid, gfp_t flags)
-{
-	return NODE_DATA(nid)->node_zonelists + gfp_zonelist(flags);
-}
-
-#ifndef HAVE_ARCH_FREE_PAGE
-static inline void arch_free_page(struct page *page, int order) { }
-#endif
-#ifndef HAVE_ARCH_ALLOC_PAGE
-static inline void arch_alloc_page(struct page *page, int order) { }
-#endif
-
-struct page *
-__alloc_pages_nodemask(gfp_t gfp_mask, unsigned int order,
-		       struct zonelist *zonelist, nodemask_t *nodemask);
-
-static inline struct page *
-__alloc_pages(gfp_t gfp_mask, unsigned int order,
-		struct zonelist *zonelist)
-{
-	return __alloc_pages_nodemask(gfp_mask, order, zonelist, NULL);
-}
-
-static inline struct page *alloc_pages_node(int nid, gfp_t gfp_mask,
-						unsigned int order)
-{
-	/* Unknown node is current node */
-	if (nid < 0)
-		nid = numa_node_id();
-
-	return __alloc_pages(gfp_mask, order, node_zonelist(nid, gfp_mask));
-}
-
-static inline struct page *alloc_pages_exact_node(int nid, gfp_t gfp_mask,
-						unsigned int order)
-{
-	VM_BUG_ON(nid < 0 || nid >= MAX_NUMNODES || !node_online(nid));
-
-	return __alloc_pages(gfp_mask, order, node_zonelist(nid, gfp_mask));
-}
-
-#ifdef CONFIG_NUMA
-extern struct page *alloc_pages_current(gfp_t gfp_mask, unsigned order);
-
-static inline struct page *
-alloc_pages(gfp_t gfp_mask, unsigned int order)
-{
-	return alloc_pages_current(gfp_mask, order);
-}
-extern struct page *alloc_pages_vma(gfp_t gfp_mask, int order,
-			struct vm_area_struct *vma, unsigned long addr,
-			int node);
-#else
-#define alloc_pages(gfp_mask, order) \
-		alloc_pages_node(numa_node_id(), gfp_mask, order)
-#define alloc_pages_vma(gfp_mask, order, vma, addr, node)	\
-	alloc_pages(gfp_mask, order)
-#endif
-#define alloc_page(gfp_mask) alloc_pages(gfp_mask, 0)
-#define alloc_page_vma(gfp_mask, vma, addr)			\
-	alloc_pages_vma(gfp_mask, 0, vma, addr, numa_node_id())
-#define alloc_page_vma_node(gfp_mask, vma, addr, node)		\
-	alloc_pages_vma(gfp_mask, 0, vma, addr, node)
-
-extern unsigned long __get_free_pages(gfp_t gfp_mask, unsigned int order);
-extern unsigned long get_zeroed_page(gfp_t gfp_mask);
-
-void *alloc_pages_exact(size_t size, gfp_t gfp_mask);
-void free_pages_exact(void *virt, size_t size);
-/* This is different from alloc_pages_exact_node !!! */
-void *alloc_pages_exact_nid(int nid, size_t size, gfp_t gfp_mask);
-
-#define __get_free_page(gfp_mask) \
-		__get_free_pages((gfp_mask), 0)
-
-#define __get_dma_pages(gfp_mask, order) \
-		__get_free_pages((gfp_mask) | GFP_DMA, (order))
-
-extern void __free_pages(struct page *page, unsigned int order);
-extern void free_pages(unsigned long addr, unsigned int order);
-extern void free_hot_cold_page(struct page *page, int cold);
-extern void free_hot_cold_page_list(struct list_head *list, int cold);
-
-#define __free_page(page) __free_pages((page), 0)
-#define free_page(addr) free_pages((addr), 0)
-
-void page_alloc_init(void);
-void drain_zone_pages(struct zone *zone, struct per_cpu_pages *pcp);
-void drain_all_pages(void);
-void drain_local_pages(void *dummy);
-
-/*
- * gfp_allowed_mask is set to GFP_BOOT_MASK during early boot to restrict what
- * GFP flags are used before interrupts are enabled. Once interrupts are
- * enabled, it is set to __GFP_BITS_MASK while the system is running. During
- * hibernation, it is used by PM to avoid I/O during memory allocation while
- * devices are suspended.
- */
-extern gfp_t gfp_allowed_mask;
-
-extern void pm_restrict_gfp_mask(void);
-extern void pm_restore_gfp_mask(void);
-
-#ifdef CONFIG_PM_SLEEP
-extern bool pm_suspended_storage(void);
-#else
-static inline bool pm_suspended_storage(void)
-{
-	return false;
-}
-#endif /* CONFIG_PM_SLEEP */
-
-#endif /* __LINUX_GFP_H */
diff --git a/ANDROID_3.4.5/include/linux/gfs2_ondisk.h b/ANDROID_3.4.5/include/linux/gfs2_ondisk.h
deleted file mode 100644
index fa98bdb0..00000000
--- a/ANDROID_3.4.5/include/linux/gfs2_ondisk.h
+++ /dev/null
@@ -1,452 +0,0 @@
-/*
- * Copyright (C) Sistina Software, Inc.  1997-2003 All rights reserved.
- * Copyright (C) 2004-2006 Red Hat, Inc.  All rights reserved.
- *
- * This copyrighted material is made available to anyone wishing to use,
- * modify, copy, or redistribute it subject to the terms and conditions
- * of the GNU General Public License v.2.
- */
-
-#ifndef __GFS2_ONDISK_DOT_H__
-#define __GFS2_ONDISK_DOT_H__
-
-#include <linux/types.h>
-
-#define GFS2_MAGIC		0x01161970
-#define GFS2_BASIC_BLOCK	512
-#define GFS2_BASIC_BLOCK_SHIFT	9
-
-/* Lock numbers of the LM_TYPE_NONDISK type */
-
-#define GFS2_MOUNT_LOCK		0
-#define GFS2_LIVE_LOCK		1
-#define GFS2_TRANS_LOCK		2
-#define GFS2_RENAME_LOCK	3
-#define GFS2_CONTROL_LOCK	4
-#define GFS2_MOUNTED_LOCK	5
-
-/* Format numbers for various metadata types */
-
-#define GFS2_FORMAT_NONE	0
-#define GFS2_FORMAT_SB		100
-#define GFS2_FORMAT_RG		200
-#define GFS2_FORMAT_RB		300
-#define GFS2_FORMAT_DI		400
-#define GFS2_FORMAT_IN		500
-#define GFS2_FORMAT_LF		600
-#define GFS2_FORMAT_JD		700
-#define GFS2_FORMAT_LH		800
-#define GFS2_FORMAT_LD		900
-#define GFS2_FORMAT_LB		1000
-#define GFS2_FORMAT_EA		1600
-#define GFS2_FORMAT_ED		1700
-#define GFS2_FORMAT_QC		1400
-/* These are format numbers for entities contained in files */
-#define GFS2_FORMAT_RI		1100
-#define GFS2_FORMAT_DE		1200
-#define GFS2_FORMAT_QU		1500
-/* These are part of the superblock */
-#define GFS2_FORMAT_FS		1801
-#define GFS2_FORMAT_MULTI	1900
-
-/*
- * An on-disk inode number
- */
-
-struct gfs2_inum {
-	__be64 no_formal_ino;
-	__be64 no_addr;
-};
-
-/*
- * Generic metadata head structure
- * Every inplace buffer logged in the journal must start with this.
- */
-
-#define GFS2_METATYPE_NONE	0
-#define GFS2_METATYPE_SB	1
-#define GFS2_METATYPE_RG	2
-#define GFS2_METATYPE_RB	3
-#define GFS2_METATYPE_DI	4
-#define GFS2_METATYPE_IN	5
-#define GFS2_METATYPE_LF	6
-#define GFS2_METATYPE_JD	7
-#define GFS2_METATYPE_LH	8
-#define GFS2_METATYPE_LD	9
-#define GFS2_METATYPE_LB	12
-#define GFS2_METATYPE_EA	10
-#define GFS2_METATYPE_ED	11
-#define GFS2_METATYPE_QC	14
-
-struct gfs2_meta_header {
-	__be32 mh_magic;
-	__be32 mh_type;
-	__be64 __pad0;		/* Was generation number in gfs1 */
-	__be32 mh_format;
-	/* This union is to keep userspace happy */
-	union {
-		__be32 mh_jid;		/* Was incarnation number in gfs1 */
-		__be32 __pad1;
-	};
-};
-
-/*
- * super-block structure
- *
- * It's probably good if SIZEOF_SB <= GFS2_BASIC_BLOCK (512 bytes)
- *
- * Order is important, need to be able to read old superblocks to do on-disk
- * version upgrades.
- */
-
-/* Address of superblock in GFS2 basic blocks */
-#define GFS2_SB_ADDR		128
-
-/* The lock number for the superblock (must be zero) */
-#define GFS2_SB_LOCK		0
-
-/* Requirement:  GFS2_LOCKNAME_LEN % 8 == 0
-   Includes: the fencing zero at the end */
-#define GFS2_LOCKNAME_LEN	64
-
-struct gfs2_sb {
-	struct gfs2_meta_header sb_header;
-
-	__be32 sb_fs_format;
-	__be32 sb_multihost_format;
-	__u32  __pad0;	/* Was superblock flags in gfs1 */
-
-	__be32 sb_bsize;
-	__be32 sb_bsize_shift;
-	__u32 __pad1;	/* Was journal segment size in gfs1 */
-
-	struct gfs2_inum sb_master_dir; /* Was jindex dinode in gfs1 */
-	struct gfs2_inum __pad2; /* Was rindex dinode in gfs1 */
-	struct gfs2_inum sb_root_dir;
-
-	char sb_lockproto[GFS2_LOCKNAME_LEN];
-	char sb_locktable[GFS2_LOCKNAME_LEN];
-
-	struct gfs2_inum __pad3; /* Was quota inode in gfs1 */
-	struct gfs2_inum __pad4; /* Was licence inode in gfs1 */
-#define GFS2_HAS_UUID 1
-	__u8 sb_uuid[16]; /* The UUID, maybe 0 for backwards compat */
-};
-
-/*
- * resource index structure
- */
-
-struct gfs2_rindex {
-	__be64 ri_addr;	/* grp block disk address */
-	__be32 ri_length;	/* length of rgrp header in fs blocks */
-	__u32 __pad;
-
-	__be64 ri_data0;	/* first data location */
-	__be32 ri_data;	/* num of data blocks in rgrp */
-
-	__be32 ri_bitbytes;	/* number of bytes in data bitmaps */
-
-	__u8 ri_reserved[64];
-};
-
-/*
- * resource group header structure
- */
-
-/* Number of blocks per byte in rgrp */
-#define GFS2_NBBY		4
-#define GFS2_BIT_SIZE		2
-#define GFS2_BIT_MASK		0x00000003
-
-#define GFS2_BLKST_FREE		0
-#define GFS2_BLKST_USED		1
-#define GFS2_BLKST_UNLINKED	2
-#define GFS2_BLKST_DINODE	3
-
-#define GFS2_RGF_JOURNAL	0x00000001
-#define GFS2_RGF_METAONLY	0x00000002
-#define GFS2_RGF_DATAONLY	0x00000004
-#define GFS2_RGF_NOALLOC	0x00000008
-#define GFS2_RGF_TRIMMED	0x00000010
-
-struct gfs2_rgrp {
-	struct gfs2_meta_header rg_header;
-
-	__be32 rg_flags;
-	__be32 rg_free;
-	__be32 rg_dinodes;
-	__be32 __pad;
-	__be64 rg_igeneration;
-
-	__u8 rg_reserved[80]; /* Several fields from gfs1 now reserved */
-};
-
-/*
- * quota structure
- */
-
-struct gfs2_quota {
-	__be64 qu_limit;
-	__be64 qu_warn;
-	__be64 qu_value;
-	__u8 qu_reserved[64];
-};
-
-/*
- * dinode structure
- */
-
-#define GFS2_MAX_META_HEIGHT	10
-#define GFS2_DIR_MAX_DEPTH	17
-
-#define DT2IF(dt) (((dt) << 12) & S_IFMT)
-#define IF2DT(sif) (((sif) & S_IFMT) >> 12)
-
-enum {
-	gfs2fl_Jdata		= 0,
-	gfs2fl_ExHash		= 1,
-	gfs2fl_Unused		= 2,
-	gfs2fl_EaIndirect	= 3,
-	gfs2fl_Directio		= 4,
-	gfs2fl_Immutable	= 5,
-	gfs2fl_AppendOnly	= 6,
-	gfs2fl_NoAtime		= 7,
-	gfs2fl_Sync		= 8,
-	gfs2fl_System		= 9,
-	gfs2fl_TruncInProg	= 29,
-	gfs2fl_InheritDirectio	= 30,
-	gfs2fl_InheritJdata	= 31,
-};
-
-/* Dinode flags */
-#define GFS2_DIF_JDATA			0x00000001
-#define GFS2_DIF_EXHASH			0x00000002
-#define GFS2_DIF_UNUSED			0x00000004  /* only in gfs1 */
-#define GFS2_DIF_EA_INDIRECT		0x00000008
-#define GFS2_DIF_DIRECTIO		0x00000010
-#define GFS2_DIF_IMMUTABLE		0x00000020
-#define GFS2_DIF_APPENDONLY		0x00000040
-#define GFS2_DIF_NOATIME		0x00000080
-#define GFS2_DIF_SYNC			0x00000100
-#define GFS2_DIF_SYSTEM			0x00000200 /* New in gfs2 */
-#define GFS2_DIF_TRUNC_IN_PROG		0x20000000 /* New in gfs2 */
-#define GFS2_DIF_INHERIT_DIRECTIO	0x40000000
-#define GFS2_DIF_INHERIT_JDATA		0x80000000
-
-struct gfs2_dinode {
-	struct gfs2_meta_header di_header;
-
-	struct gfs2_inum di_num;
-
-	__be32 di_mode;	/* mode of file */
-	__be32 di_uid;	/* owner's user id */
-	__be32 di_gid;	/* owner's group id */
-	__be32 di_nlink;	/* number of links to this file */
-	__be64 di_size;	/* number of bytes in file */
-	__be64 di_blocks;	/* number of blocks in file */
-	__be64 di_atime;	/* time last accessed */
-	__be64 di_mtime;	/* time last modified */
-	__be64 di_ctime;	/* time last changed */
-	__be32 di_major;	/* device major number */
-	__be32 di_minor;	/* device minor number */
-
-	/* This section varies from gfs1. Padding added to align with
-         * remainder of dinode
-	 */
-	__be64 di_goal_meta;	/* rgrp to alloc from next */
-	__be64 di_goal_data;	/* data block goal */
-	__be64 di_generation;	/* generation number for NFS */
-
-	__be32 di_flags;	/* GFS2_DIF_... */
-	__be32 di_payload_format;  /* GFS2_FORMAT_... */
-	__u16 __pad1;	/* Was ditype in gfs1 */
-	__be16 di_height;	/* height of metadata */
-	__u32 __pad2;	/* Unused incarnation number from gfs1 */
-
-	/* These only apply to directories  */
-	__u16 __pad3;	/* Padding */
-	__be16 di_depth;	/* Number of bits in the table */
-	__be32 di_entries;	/* The number of entries in the directory */
-
-	struct gfs2_inum __pad4; /* Unused even in current gfs1 */
-
-	__be64 di_eattr;	/* extended attribute block number */
-	__be32 di_atime_nsec;   /* nsec portion of atime */
-	__be32 di_mtime_nsec;   /* nsec portion of mtime */
-	__be32 di_ctime_nsec;   /* nsec portion of ctime */
-
-	__u8 di_reserved[44];
-};
-
-/*
- * directory structure - many of these per directory file
- */
-
-#define GFS2_FNAMESIZE		255
-#define GFS2_DIRENT_SIZE(name_len) ((sizeof(struct gfs2_dirent) + (name_len) + 7) & ~7)
-
-struct gfs2_dirent {
-	struct gfs2_inum de_inum;
-	__be32 de_hash;
-	__be16 de_rec_len;
-	__be16 de_name_len;
-	__be16 de_type;
-	__u8 __pad[14];
-};
-
-/*
- * Header of leaf directory nodes
- */
-
-struct gfs2_leaf {
-	struct gfs2_meta_header lf_header;
-
-	__be16 lf_depth;		/* Depth of leaf */
-	__be16 lf_entries;		/* Number of dirents in leaf */
-	__be32 lf_dirent_format;	/* Format of the dirents */
-	__be64 lf_next;			/* Next leaf, if overflow */
-
-	__u8 lf_reserved[64];
-};
-
-/*
- * Extended attribute header format
- *
- * This works in a similar way to dirents. There is a fixed size header
- * followed by a variable length section made up of the name and the
- * associated data. In the case of a "stuffed" entry, the value is
- * inline directly after the name, the ea_num_ptrs entry will be
- * zero in that case. For non-"stuffed" entries, there will be
- * a set of pointers (aligned to 8 byte boundary) to the block(s)
- * containing the value.
- *
- * The blocks containing the values and the blocks containing the
- * extended attribute headers themselves all start with the common
- * metadata header. Each inode, if it has extended attributes, will
- * have either a single block containing the extended attribute headers
- * or a single indirect block pointing to blocks containing the
- * extended attribure headers.
- *
- * The maximim size of the data part of an extended attribute is 64k
- * so the number of blocks required depends upon block size. Since the
- * block size also determines the number of pointers in an indirect
- * block, its a fairly complicated calculation to work out the maximum
- * number of blocks that an inode may have relating to extended attributes.
- *
- */
-
-#define GFS2_EA_MAX_NAME_LEN	255
-#define GFS2_EA_MAX_DATA_LEN	65536
-
-#define GFS2_EATYPE_UNUSED	0
-#define GFS2_EATYPE_USR		1
-#define GFS2_EATYPE_SYS		2
-#define GFS2_EATYPE_SECURITY	3
-
-#define GFS2_EATYPE_LAST	3
-#define GFS2_EATYPE_VALID(x)	((x) <= GFS2_EATYPE_LAST)
-
-#define GFS2_EAFLAG_LAST	0x01	/* last ea in block */
-
-struct gfs2_ea_header {
-	__be32 ea_rec_len;
-	__be32 ea_data_len;
-	__u8 ea_name_len;	/* no NULL pointer after the string */
-	__u8 ea_type;		/* GFS2_EATYPE_... */
-	__u8 ea_flags;		/* GFS2_EAFLAG_... */
-	__u8 ea_num_ptrs;
-	__u32 __pad;
-};
-
-/*
- * Log header structure
- */
-
-#define GFS2_LOG_HEAD_UNMOUNT	0x00000001	/* log is clean */
-
-struct gfs2_log_header {
-	struct gfs2_meta_header lh_header;
-
-	__be64 lh_sequence;	/* Sequence number of this transaction */
-	__be32 lh_flags;	/* GFS2_LOG_HEAD_... */
-	__be32 lh_tail;		/* Block number of log tail */
-	__be32 lh_blkno;
-	__be32 lh_hash;
-};
-
-/*
- * Log type descriptor
- */
-
-#define GFS2_LOG_DESC_METADATA	300
-/* ld_data1 is the number of metadata blocks in the descriptor.
-   ld_data2 is unused. */
-
-#define GFS2_LOG_DESC_REVOKE	301
-/* ld_data1 is the number of revoke blocks in the descriptor.
-   ld_data2 is unused. */
-
-#define GFS2_LOG_DESC_JDATA	302
-/* ld_data1 is the number of data blocks in the descriptor.
-   ld_data2 is unused. */
-
-struct gfs2_log_descriptor {
-	struct gfs2_meta_header ld_header;
-
-	__be32 ld_type;		/* GFS2_LOG_DESC_... */
-	__be32 ld_length;	/* Number of buffers in this chunk */
-	__be32 ld_data1;	/* descriptor-specific field */
-	__be32 ld_data2;	/* descriptor-specific field */
-
-	__u8 ld_reserved[32];
-};
-
-/*
- * Inum Range
- * Describe a range of formal inode numbers allocated to
- * one machine to assign to inodes.
- */
-
-#define GFS2_INUM_QUANTUM	1048576
-
-struct gfs2_inum_range {
-	__be64 ir_start;
-	__be64 ir_length;
-};
-
-/*
- * Statfs change
- * Describes an change to the pool of free and allocated
- * blocks.
- */
-
-struct gfs2_statfs_change {
-	__be64 sc_total;
-	__be64 sc_free;
-	__be64 sc_dinodes;
-};
-
-/*
- * Quota change
- * Describes an allocation change for a particular
- * user or group.
- */
-
-#define GFS2_QCF_USER		0x00000001
-
-struct gfs2_quota_change {
-	__be64 qc_change;
-	__be32 qc_flags;	/* GFS2_QCF_... */
-	__be32 qc_id;
-};
-
-struct gfs2_quota_lvb {
-        __be32 qb_magic;
-        __u32 __pad;
-        __be64 qb_limit;      /* Hard limit of # blocks to alloc */
-        __be64 qb_warn;       /* Warn user when alloc is above this # */
-        __be64 qb_value;       /* Current # blocks allocated */
-};
-
-#endif /* __GFS2_ONDISK_DOT_H__ */
diff --git a/ANDROID_3.4.5/include/linux/gigaset_dev.h b/ANDROID_3.4.5/include/linux/gigaset_dev.h
deleted file mode 100644
index 258ba829..00000000
--- a/ANDROID_3.4.5/include/linux/gigaset_dev.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- * interface to user space for the gigaset driver
- *
- * Copyright (c) 2004 by Hansjoerg Lipp <hjlipp@web.de>
- *
- * =====================================================================
- *    This program is free software; you can redistribute it and/or
- *    modify it under the terms of the GNU General Public License as
- *    published by the Free Software Foundation; either version 2 of
- *    the License, or (at your option) any later version.
- * =====================================================================
- */
-
-#ifndef GIGASET_INTERFACE_H
-#define GIGASET_INTERFACE_H
-
-#include <linux/ioctl.h>
-
-/* The magic IOCTL value for this interface. */
-#define GIGASET_IOCTL 0x47
-
-/* enable/disable device control via character device (lock out ISDN subsys) */
-#define GIGASET_REDIR    _IOWR(GIGASET_IOCTL, 0, int)
-
-/* enable adapter configuration mode (M10x only) */
-#define GIGASET_CONFIG   _IOWR(GIGASET_IOCTL, 1, int)
-
-/* set break characters (M105 only) */
-#define GIGASET_BRKCHARS _IOW(GIGASET_IOCTL, 2, unsigned char[6])
-
-/* get version information selected by arg[0] */
-#define GIGASET_VERSION  _IOWR(GIGASET_IOCTL, 3, unsigned[4])
-/* values for GIGASET_VERSION arg[0] */
-#define GIGVER_DRIVER 0		/* get driver version */
-#define GIGVER_COMPAT 1		/* get interface compatibility version */
-#define GIGVER_FWBASE 2		/* get base station firmware version */
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/gpio-fan.h b/ANDROID_3.4.5/include/linux/gpio-fan.h
deleted file mode 100644
index 09665916..00000000
--- a/ANDROID_3.4.5/include/linux/gpio-fan.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * include/linux/gpio-fan.h
- *
- * Platform data structure for GPIO fan driver
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __LINUX_GPIO_FAN_H
-#define __LINUX_GPIO_FAN_H
-
-struct gpio_fan_alarm {
-	unsigned	gpio;
-	unsigned	active_low;
-};
-
-struct gpio_fan_speed {
-	int rpm;
-	int ctrl_val;
-};
-
-struct gpio_fan_platform_data {
-	int			num_ctrl;
-	unsigned		*ctrl;	/* fan control GPIOs. */
-	struct gpio_fan_alarm	*alarm;	/* fan alarm GPIO. */
-	/*
-	 * Speed conversion array: rpm from/to GPIO bit field.
-	 * This array _must_ be sorted in ascending rpm order.
-	 */
-	int			num_speed;
-	struct gpio_fan_speed	*speed;
-};
-
-#endif /* __LINUX_GPIO_FAN_H */
diff --git a/ANDROID_3.4.5/include/linux/gpio-i2cmux.h b/ANDROID_3.4.5/include/linux/gpio-i2cmux.h
deleted file mode 100644
index 4a333bb0..00000000
--- a/ANDROID_3.4.5/include/linux/gpio-i2cmux.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- * gpio-i2cmux interface to platform code
- *
- * Peter Korsgaard <peter.korsgaard@barco.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef _LINUX_GPIO_I2CMUX_H
-#define _LINUX_GPIO_I2CMUX_H
-
-/* MUX has no specific idle mode */
-#define GPIO_I2CMUX_NO_IDLE	((unsigned)-1)
-
-/**
- * struct gpio_i2cmux_platform_data - Platform-dependent data for gpio-i2cmux
- * @parent: Parent I2C bus adapter number
- * @base_nr: Base I2C bus number to number adapters from or zero for dynamic
- * @values: Array of bitmasks of GPIO settings (low/high) for each
- *	position
- * @n_values: Number of multiplexer positions (busses to instantiate)
- * @gpios: Array of GPIO numbers used to control MUX
- * @n_gpios: Number of GPIOs used to control MUX
- * @idle: Bitmask to write to MUX when idle or GPIO_I2CMUX_NO_IDLE if not used
- */
-struct gpio_i2cmux_platform_data {
-	int parent;
-	int base_nr;
-	const unsigned *values;
-	int n_values;
-	const unsigned *gpios;
-	int n_gpios;
-	unsigned idle;
-};
-
-#endif /* _LINUX_GPIO_I2CMUX_H */
diff --git a/ANDROID_3.4.5/include/linux/gpio-pxa.h b/ANDROID_3.4.5/include/linux/gpio-pxa.h
deleted file mode 100644
index d755b28b..00000000
--- a/ANDROID_3.4.5/include/linux/gpio-pxa.h
+++ /dev/null
@@ -1,20 +0,0 @@
-#ifndef __GPIO_PXA_H
-#define __GPIO_PXA_H
-
-#define GPIO_bit(x)	(1 << ((x) & 0x1f))
-
-#define gpio_to_bank(gpio)	((gpio) >> 5)
-
-/* NOTE: some PXAs have fewer on-chip GPIOs (like PXA255, with 85).
- * Those cases currently cause holes in the GPIO number space, the
- * actual number of the last GPIO is recorded by 'pxa_last_gpio'.
- */
-extern int pxa_last_gpio;
-
-extern int pxa_irq_to_gpio(int irq);
-
-struct pxa_gpio_platform_data {
-	int (*gpio_set_wake)(unsigned int gpio, unsigned int on);
-};
-
-#endif /* __GPIO_PXA_H */
diff --git a/ANDROID_3.4.5/include/linux/gpio.h b/ANDROID_3.4.5/include/linux/gpio.h
deleted file mode 100644
index 6155ecf1..00000000
--- a/ANDROID_3.4.5/include/linux/gpio.h
+++ /dev/null
@@ -1,177 +0,0 @@
-#ifndef __LINUX_GPIO_H
-#define __LINUX_GPIO_H
-
-/* see Documentation/gpio.txt */
-
-/* make these flag values available regardless of GPIO kconfig options */
-#define GPIOF_DIR_OUT	(0 << 0)
-#define GPIOF_DIR_IN	(1 << 0)
-
-#define GPIOF_INIT_LOW	(0 << 1)
-#define GPIOF_INIT_HIGH	(1 << 1)
-
-#define GPIOF_IN		(GPIOF_DIR_IN)
-#define GPIOF_OUT_INIT_LOW	(GPIOF_DIR_OUT | GPIOF_INIT_LOW)
-#define GPIOF_OUT_INIT_HIGH	(GPIOF_DIR_OUT | GPIOF_INIT_HIGH)
-
-/* Gpio pin is open drain */
-#define GPIOF_OPEN_DRAIN	(1 << 2)
-
-/* Gpio pin is open source */
-#define GPIOF_OPEN_SOURCE	(1 << 3)
-
-/**
- * struct gpio - a structure describing a GPIO with configuration
- * @gpio:	the GPIO number
- * @flags:	GPIO configuration as specified by GPIOF_*
- * @label:	a literal description string of this GPIO
- */
-struct gpio {
-	unsigned	gpio;
-	unsigned long	flags;
-	const char	*label;
-};
-
-#ifdef CONFIG_GENERIC_GPIO
-#include <asm/gpio.h>
-
-#else
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <linux/bug.h>
-
-struct device;
-struct gpio_chip;
-
-static inline bool gpio_is_valid(int number)
-{
-	return false;
-}
-
-static inline int gpio_request(unsigned gpio, const char *label)
-{
-	return -ENOSYS;
-}
-
-static inline int gpio_request_one(unsigned gpio,
-					unsigned long flags, const char *label)
-{
-	return -ENOSYS;
-}
-
-static inline int gpio_request_array(const struct gpio *array, size_t num)
-{
-	return -ENOSYS;
-}
-
-static inline void gpio_free(unsigned gpio)
-{
-	might_sleep();
-
-	/* GPIO can never have been requested */
-	WARN_ON(1);
-}
-
-static inline void gpio_free_array(const struct gpio *array, size_t num)
-{
-	might_sleep();
-
-	/* GPIO can never have been requested */
-	WARN_ON(1);
-}
-
-static inline int gpio_direction_input(unsigned gpio)
-{
-	return -ENOSYS;
-}
-
-static inline int gpio_direction_output(unsigned gpio, int value)
-{
-	return -ENOSYS;
-}
-
-static inline int gpio_set_debounce(unsigned gpio, unsigned debounce)
-{
-	return -ENOSYS;
-}
-
-static inline int gpio_get_value(unsigned gpio)
-{
-	/* GPIO can never have been requested or set as {in,out}put */
-	WARN_ON(1);
-	return 0;
-}
-
-static inline void gpio_set_value(unsigned gpio, int value)
-{
-	/* GPIO can never have been requested or set as output */
-	WARN_ON(1);
-}
-
-static inline int gpio_cansleep(unsigned gpio)
-{
-	/* GPIO can never have been requested or set as {in,out}put */
-	WARN_ON(1);
-	return 0;
-}
-
-static inline int gpio_get_value_cansleep(unsigned gpio)
-{
-	/* GPIO can never have been requested or set as {in,out}put */
-	WARN_ON(1);
-	return 0;
-}
-
-static inline void gpio_set_value_cansleep(unsigned gpio, int value)
-{
-	/* GPIO can never have been requested or set as output */
-	WARN_ON(1);
-}
-
-static inline int gpio_export(unsigned gpio, bool direction_may_change)
-{
-	/* GPIO can never have been requested or set as {in,out}put */
-	WARN_ON(1);
-	return -EINVAL;
-}
-
-static inline int gpio_export_link(struct device *dev, const char *name,
-				unsigned gpio)
-{
-	/* GPIO can never have been exported */
-	WARN_ON(1);
-	return -EINVAL;
-}
-
-static inline int gpio_sysfs_set_active_low(unsigned gpio, int value)
-{
-	/* GPIO can never have been requested */
-	WARN_ON(1);
-	return -EINVAL;
-}
-
-static inline void gpio_unexport(unsigned gpio)
-{
-	/* GPIO can never have been exported */
-	WARN_ON(1);
-}
-
-static inline int gpio_to_irq(unsigned gpio)
-{
-	/* GPIO can never have been requested or set as input */
-	WARN_ON(1);
-	return -EINVAL;
-}
-
-static inline int irq_to_gpio(unsigned irq)
-{
-	/* irq can never have been returned from gpio_to_irq() */
-	WARN_ON(1);
-	return -EINVAL;
-}
-
-#endif
-
-#endif /* __LINUX_GPIO_H */
diff --git a/ANDROID_3.4.5/include/linux/gpio_event.h b/ANDROID_3.4.5/include/linux/gpio_event.h
deleted file mode 100644
index 2613fc5e..00000000
--- a/ANDROID_3.4.5/include/linux/gpio_event.h
+++ /dev/null
@@ -1,170 +0,0 @@
-/* include/linux/gpio_event.h
- *
- * Copyright (C) 2007 Google, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef _LINUX_GPIO_EVENT_H
-#define _LINUX_GPIO_EVENT_H
-
-#include <linux/input.h>
-
-struct gpio_event_input_devs {
-	int count;
-	struct input_dev *dev[];
-};
-enum {
-	GPIO_EVENT_FUNC_UNINIT  = 0x0,
-	GPIO_EVENT_FUNC_INIT    = 0x1,
-	GPIO_EVENT_FUNC_SUSPEND = 0x2,
-	GPIO_EVENT_FUNC_RESUME  = 0x3,
-};
-struct gpio_event_info {
-	int (*func)(struct gpio_event_input_devs *input_devs,
-		    struct gpio_event_info *info,
-		    void **data, int func);
-	int (*event)(struct gpio_event_input_devs *input_devs,
-		     struct gpio_event_info *info,
-		     void **data, unsigned int dev, unsigned int type,
-		     unsigned int code, int value); /* out events */
-	bool no_suspend;
-};
-
-struct gpio_event_platform_data {
-	const char *name;
-	struct gpio_event_info **info;
-	size_t info_count;
-	int (*power)(const struct gpio_event_platform_data *pdata, bool on);
-	const char *names[]; /* If name is NULL, names contain a NULL */
-			     /* terminated list of input devices to create */
-};
-
-#define GPIO_EVENT_DEV_NAME "gpio-event"
-
-/* Key matrix */
-
-enum gpio_event_matrix_flags {
-	/* unset: drive active output low, set: drive active output high */
-	GPIOKPF_ACTIVE_HIGH              = 1U << 0,
-	GPIOKPF_DEBOUNCE                 = 1U << 1,
-	GPIOKPF_REMOVE_SOME_PHANTOM_KEYS = 1U << 2,
-	GPIOKPF_REMOVE_PHANTOM_KEYS      = GPIOKPF_REMOVE_SOME_PHANTOM_KEYS |
-					   GPIOKPF_DEBOUNCE,
-	GPIOKPF_DRIVE_INACTIVE           = 1U << 3,
-	GPIOKPF_LEVEL_TRIGGERED_IRQ      = 1U << 4,
-	GPIOKPF_PRINT_UNMAPPED_KEYS      = 1U << 16,
-	GPIOKPF_PRINT_MAPPED_KEYS        = 1U << 17,
-	GPIOKPF_PRINT_PHANTOM_KEYS       = 1U << 18,
-};
-
-#define MATRIX_CODE_BITS (10)
-#define MATRIX_KEY_MASK ((1U << MATRIX_CODE_BITS) - 1)
-#define MATRIX_KEY(dev, code) \
-	(((dev) << MATRIX_CODE_BITS) | (code & MATRIX_KEY_MASK))
-
-extern int gpio_event_matrix_func(struct gpio_event_input_devs *input_devs,
-			struct gpio_event_info *info, void **data, int func);
-struct gpio_event_matrix_info {
-	/* initialize to gpio_event_matrix_func */
-	struct gpio_event_info info;
-	/* size must be ninputs * noutputs */
-	const unsigned short *keymap;
-	unsigned int *input_gpios;
-	unsigned int *output_gpios;
-	unsigned int ninputs;
-	unsigned int noutputs;
-	/* time to wait before reading inputs after driving each output */
-	ktime_t settle_time;
-	/* time to wait before scanning the keypad a second time */
-	ktime_t debounce_delay;
-	ktime_t poll_time;
-	unsigned flags;
-};
-
-/* Directly connected inputs and outputs */
-
-enum gpio_event_direct_flags {
-	GPIOEDF_ACTIVE_HIGH         = 1U << 0,
-/*	GPIOEDF_USE_DOWN_IRQ        = 1U << 1, */
-/*	GPIOEDF_USE_IRQ             = (1U << 2) | GPIOIDF_USE_DOWN_IRQ, */
-	GPIOEDF_PRINT_KEYS          = 1U << 8,
-	GPIOEDF_PRINT_KEY_DEBOUNCE  = 1U << 9,
-	GPIOEDF_PRINT_KEY_UNSTABLE  = 1U << 10,
-};
-
-struct gpio_event_direct_entry {
-	uint32_t gpio:16;
-	uint32_t code:10;
-	uint32_t dev:6;
-};
-
-/* inputs */
-extern int gpio_event_input_func(struct gpio_event_input_devs *input_devs,
-			struct gpio_event_info *info, void **data, int func);
-struct gpio_event_input_info {
-	/* initialize to gpio_event_input_func */
-	struct gpio_event_info info;
-	ktime_t debounce_time;
-	ktime_t poll_time;
-	uint16_t flags;
-	uint16_t type;
-	const struct gpio_event_direct_entry *keymap;
-	size_t keymap_size;
-};
-
-/* outputs */
-extern int gpio_event_output_func(struct gpio_event_input_devs *input_devs,
-			struct gpio_event_info *info, void **data, int func);
-extern int gpio_event_output_event(struct gpio_event_input_devs *input_devs,
-			struct gpio_event_info *info, void **data,
-			unsigned int dev, unsigned int type,
-			unsigned int code, int value);
-struct gpio_event_output_info {
-	/* initialize to gpio_event_output_func and gpio_event_output_event */
-	struct gpio_event_info info;
-	uint16_t flags;
-	uint16_t type;
-	const struct gpio_event_direct_entry *keymap;
-	size_t keymap_size;
-};
-
-
-/* axes */
-
-enum gpio_event_axis_flags {
-	GPIOEAF_PRINT_UNKNOWN_DIRECTION  = 1U << 16,
-	GPIOEAF_PRINT_RAW                = 1U << 17,
-	GPIOEAF_PRINT_EVENT              = 1U << 18,
-};
-
-extern int gpio_event_axis_func(struct gpio_event_input_devs *input_devs,
-			struct gpio_event_info *info, void **data, int func);
-struct gpio_event_axis_info {
-	/* initialize to gpio_event_axis_func */
-	struct gpio_event_info info;
-	uint8_t  count; /* number of gpios for this axis */
-	uint8_t  dev; /* device index when using multiple input devices */
-	uint8_t  type; /* EV_REL or EV_ABS */
-	uint16_t code;
-	uint16_t decoded_size;
-	uint16_t (*map)(struct gpio_event_axis_info *info, uint16_t in);
-	uint32_t *gpio;
-	uint32_t flags;
-};
-#define gpio_axis_2bit_gray_map gpio_axis_4bit_gray_map
-#define gpio_axis_3bit_gray_map gpio_axis_4bit_gray_map
-uint16_t gpio_axis_4bit_gray_map(
-			struct gpio_event_axis_info *info, uint16_t in);
-uint16_t gpio_axis_5bit_singletrack_map(
-			struct gpio_event_axis_info *info, uint16_t in);
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/gpio_keys.h b/ANDROID_3.4.5/include/linux/gpio_keys.h
deleted file mode 100644
index a7e977ff..00000000
--- a/ANDROID_3.4.5/include/linux/gpio_keys.h
+++ /dev/null
@@ -1,31 +0,0 @@
-#ifndef _GPIO_KEYS_H
-#define _GPIO_KEYS_H
-
-struct device;
-
-struct gpio_keys_button {
-	/* Configuration parameters */
-	unsigned int code;	/* input event code (KEY_*, SW_*) */
-	int gpio;		/* -1 if this key does not support gpio */
-	int active_low;
-	const char *desc;
-	unsigned int type;	/* input event type (EV_KEY, EV_SW, EV_ABS) */
-	int wakeup;		/* configure the button as a wake-up source */
-	int debounce_interval;	/* debounce ticks interval in msecs */
-	bool can_disable;
-	int value;		/* axis value for EV_ABS */
-	unsigned int irq;	/* Irq number in case of interrupt keys */
-};
-
-struct gpio_keys_platform_data {
-	struct gpio_keys_button *buttons;
-	int nbuttons;
-	unsigned int poll_interval;	/* polling interval in msecs -
-					   for polling driver only */
-	unsigned int rep:1;		/* enable input subsystem auto repeat */
-	int (*enable)(struct device *dev);
-	void (*disable)(struct device *dev);
-	const char *name;		/* input device name */
-};
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/gpio_mouse.h b/ANDROID_3.4.5/include/linux/gpio_mouse.h
deleted file mode 100644
index 44ed7aa1..00000000
--- a/ANDROID_3.4.5/include/linux/gpio_mouse.h
+++ /dev/null
@@ -1,61 +0,0 @@
-/*
- * Driver for simulating a mouse on GPIO lines.
- *
- * Copyright (C) 2007 Atmel Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef _GPIO_MOUSE_H
-#define _GPIO_MOUSE_H
-
-#define GPIO_MOUSE_POLARITY_ACT_HIGH	0x00
-#define GPIO_MOUSE_POLARITY_ACT_LOW	0x01
-
-#define GPIO_MOUSE_PIN_UP	0
-#define GPIO_MOUSE_PIN_DOWN	1
-#define GPIO_MOUSE_PIN_LEFT	2
-#define GPIO_MOUSE_PIN_RIGHT	3
-#define GPIO_MOUSE_PIN_BLEFT	4
-#define GPIO_MOUSE_PIN_BMIDDLE	5
-#define GPIO_MOUSE_PIN_BRIGHT	6
-#define GPIO_MOUSE_PIN_MAX	7
-
-/**
- * struct gpio_mouse_platform_data
- * @scan_ms: integer in ms specifying the scan periode.
- * @polarity: Pin polarity, active high or low.
- * @up: GPIO line for up value.
- * @down: GPIO line for down value.
- * @left: GPIO line for left value.
- * @right: GPIO line for right value.
- * @bleft: GPIO line for left button.
- * @bmiddle: GPIO line for middle button.
- * @bright: GPIO line for right button.
- *
- * This struct must be added to the platform_device in the board code.
- * It is used by the gpio_mouse driver to setup GPIO lines and to
- * calculate mouse movement.
- */
-struct gpio_mouse_platform_data {
-	int scan_ms;
-	int polarity;
-
-	union {
-		struct {
-			int up;
-			int down;
-			int left;
-			int right;
-
-			int bleft;
-			int bmiddle;
-			int bright;
-		};
-		int pins[GPIO_MOUSE_PIN_MAX];
-	};
-};
-
-#endif /* _GPIO_MOUSE_H */
diff --git a/ANDROID_3.4.5/include/linux/gsmmux.h b/ANDROID_3.4.5/include/linux/gsmmux.h
deleted file mode 100644
index c25e9477..00000000
--- a/ANDROID_3.4.5/include/linux/gsmmux.h
+++ /dev/null
@@ -1,36 +0,0 @@
-#ifndef _LINUX_GSMMUX_H
-#define _LINUX_GSMMUX_H
-
-struct gsm_config
-{
-	unsigned int adaption;
-	unsigned int encapsulation;
-	unsigned int initiator;
-	unsigned int t1;
-	unsigned int t2;
-	unsigned int t3;
-	unsigned int n2;
-	unsigned int mru;
-	unsigned int mtu;
-	unsigned int k;
-	unsigned int i;
-	unsigned int unused[8];		/* Padding for expansion without
-					   breaking stuff */
-};
-
-#define GSMIOC_GETCONF		_IOR('G', 0, struct gsm_config)
-#define GSMIOC_SETCONF		_IOW('G', 1, struct gsm_config)
-
-struct gsm_netconfig {
-	unsigned int adaption;  /* Adaption to use in network mode */
-	unsigned short protocol;/* Protocol to use - only ETH_P_IP supported */
-	unsigned short unused2;
-	char if_name[IFNAMSIZ];	/* interface name format string */
-	__u8 unused[28];        /* For future use */
-};
-
-#define GSMIOC_ENABLE_NET      _IOW('G', 2, struct gsm_netconfig)
-#define GSMIOC_DISABLE_NET     _IO('G', 3)
-
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/hardirq.h b/ANDROID_3.4.5/include/linux/hardirq.h
deleted file mode 100644
index bb7f3097..00000000
--- a/ANDROID_3.4.5/include/linux/hardirq.h
+++ /dev/null
@@ -1,210 +0,0 @@
-#ifndef LINUX_HARDIRQ_H
-#define LINUX_HARDIRQ_H
-
-#include <linux/preempt.h>
-#include <linux/lockdep.h>
-#include <linux/ftrace_irq.h>
-#include <asm/hardirq.h>
-
-/*
- * We put the hardirq and softirq counter into the preemption
- * counter. The bitmask has the following meaning:
- *
- * - bits 0-7 are the preemption count (max preemption depth: 256)
- * - bits 8-15 are the softirq count (max # of softirqs: 256)
- *
- * The hardirq count can in theory reach the same as NR_IRQS.
- * In reality, the number of nested IRQS is limited to the stack
- * size as well. For archs with over 1000 IRQS it is not practical
- * to expect that they will all nest. We give a max of 10 bits for
- * hardirq nesting. An arch may choose to give less than 10 bits.
- * m68k expects it to be 8.
- *
- * - bits 16-25 are the hardirq count (max # of nested hardirqs: 1024)
- * - bit 26 is the NMI_MASK
- * - bit 28 is the PREEMPT_ACTIVE flag
- *
- * PREEMPT_MASK: 0x000000ff
- * SOFTIRQ_MASK: 0x0000ff00
- * HARDIRQ_MASK: 0x03ff0000
- *     NMI_MASK: 0x04000000
- */
-#define PREEMPT_BITS	8
-#define SOFTIRQ_BITS	8
-#define NMI_BITS	1
-
-#define MAX_HARDIRQ_BITS 10
-
-#ifndef HARDIRQ_BITS
-# define HARDIRQ_BITS	MAX_HARDIRQ_BITS
-#endif
-
-#if HARDIRQ_BITS > MAX_HARDIRQ_BITS
-#error HARDIRQ_BITS too high!
-#endif
-
-#define PREEMPT_SHIFT	0
-#define SOFTIRQ_SHIFT	(PREEMPT_SHIFT + PREEMPT_BITS)
-#define HARDIRQ_SHIFT	(SOFTIRQ_SHIFT + SOFTIRQ_BITS)
-#define NMI_SHIFT	(HARDIRQ_SHIFT + HARDIRQ_BITS)
-
-#define __IRQ_MASK(x)	((1UL << (x))-1)
-
-#define PREEMPT_MASK	(__IRQ_MASK(PREEMPT_BITS) << PREEMPT_SHIFT)
-#define SOFTIRQ_MASK	(__IRQ_MASK(SOFTIRQ_BITS) << SOFTIRQ_SHIFT)
-#define HARDIRQ_MASK	(__IRQ_MASK(HARDIRQ_BITS) << HARDIRQ_SHIFT)
-#define NMI_MASK	(__IRQ_MASK(NMI_BITS)     << NMI_SHIFT)
-
-#define PREEMPT_OFFSET	(1UL << PREEMPT_SHIFT)
-#define SOFTIRQ_OFFSET	(1UL << SOFTIRQ_SHIFT)
-#define HARDIRQ_OFFSET	(1UL << HARDIRQ_SHIFT)
-#define NMI_OFFSET	(1UL << NMI_SHIFT)
-
-#define SOFTIRQ_DISABLE_OFFSET	(2 * SOFTIRQ_OFFSET)
-
-#ifndef PREEMPT_ACTIVE
-#define PREEMPT_ACTIVE_BITS	1
-#define PREEMPT_ACTIVE_SHIFT	(NMI_SHIFT + NMI_BITS)
-#define PREEMPT_ACTIVE	(__IRQ_MASK(PREEMPT_ACTIVE_BITS) << PREEMPT_ACTIVE_SHIFT)
-#endif
-
-#if PREEMPT_ACTIVE < (1 << (NMI_SHIFT + NMI_BITS))
-#error PREEMPT_ACTIVE is too low!
-#endif
-
-#define hardirq_count()	(preempt_count() & HARDIRQ_MASK)
-#define softirq_count()	(preempt_count() & SOFTIRQ_MASK)
-#define irq_count()	(preempt_count() & (HARDIRQ_MASK | SOFTIRQ_MASK \
-				 | NMI_MASK))
-
-/*
- * Are we doing bottom half or hardware interrupt processing?
- * Are we in a softirq context? Interrupt context?
- * in_softirq - Are we currently processing softirq or have bh disabled?
- * in_serving_softirq - Are we currently processing softirq?
- */
-#define in_irq()		(hardirq_count())
-#define in_softirq()		(softirq_count())
-#define in_interrupt()		(irq_count())
-#define in_serving_softirq()	(softirq_count() & SOFTIRQ_OFFSET)
-
-/*
- * Are we in NMI context?
- */
-#define in_nmi()	(preempt_count() & NMI_MASK)
-
-#if defined(CONFIG_PREEMPT_COUNT)
-# define PREEMPT_CHECK_OFFSET 1
-#else
-# define PREEMPT_CHECK_OFFSET 0
-#endif
-
-/*
- * Are we running in atomic context?  WARNING: this macro cannot
- * always detect atomic context; in particular, it cannot know about
- * held spinlocks in non-preemptible kernels.  Thus it should not be
- * used in the general case to determine whether sleeping is possible.
- * Do not use in_atomic() in driver code.
- */
-#define in_atomic()	((preempt_count() & ~PREEMPT_ACTIVE) != 0)
-
-/*
- * Check whether we were atomic before we did preempt_disable():
- * (used by the scheduler, *after* releasing the kernel lock)
- */
-#define in_atomic_preempt_off() \
-		((preempt_count() & ~PREEMPT_ACTIVE) != PREEMPT_CHECK_OFFSET)
-
-#ifdef CONFIG_PREEMPT_COUNT
-# define preemptible()	(preempt_count() == 0 && !irqs_disabled())
-# define IRQ_EXIT_OFFSET (HARDIRQ_OFFSET-1)
-#else
-# define preemptible()	0
-# define IRQ_EXIT_OFFSET HARDIRQ_OFFSET
-#endif
-
-#if defined(CONFIG_SMP) || defined(CONFIG_GENERIC_HARDIRQS)
-extern void synchronize_irq(unsigned int irq);
-#else
-# define synchronize_irq(irq)	barrier()
-#endif
-
-struct task_struct;
-
-#if !defined(CONFIG_VIRT_CPU_ACCOUNTING) && !defined(CONFIG_IRQ_TIME_ACCOUNTING)
-static inline void account_system_vtime(struct task_struct *tsk)
-{
-}
-#else
-extern void account_system_vtime(struct task_struct *tsk);
-#endif
-
-#if defined(CONFIG_TINY_RCU) || defined(CONFIG_TINY_PREEMPT_RCU)
-
-static inline void rcu_nmi_enter(void)
-{
-}
-
-static inline void rcu_nmi_exit(void)
-{
-}
-
-#else
-extern void rcu_nmi_enter(void);
-extern void rcu_nmi_exit(void);
-#endif
-
-/*
- * It is safe to do non-atomic ops on ->hardirq_context,
- * because NMI handlers may not preempt and the ops are
- * always balanced, so the interrupted value of ->hardirq_context
- * will always be restored.
- */
-#define __irq_enter()					\
-	do {						\
-		account_system_vtime(current);		\
-		add_preempt_count(HARDIRQ_OFFSET);	\
-		trace_hardirq_enter();			\
-	} while (0)
-
-/*
- * Enter irq context (on NO_HZ, update jiffies):
- */
-extern void irq_enter(void);
-
-/*
- * Exit irq context without processing softirqs:
- */
-#define __irq_exit()					\
-	do {						\
-		trace_hardirq_exit();			\
-		account_system_vtime(current);		\
-		sub_preempt_count(HARDIRQ_OFFSET);	\
-	} while (0)
-
-/*
- * Exit irq context and process softirqs if needed:
- */
-extern void irq_exit(void);
-
-#define nmi_enter()						\
-	do {							\
-		ftrace_nmi_enter();				\
-		BUG_ON(in_nmi());				\
-		add_preempt_count(NMI_OFFSET + HARDIRQ_OFFSET);	\
-		lockdep_off();					\
-		rcu_nmi_enter();				\
-		trace_hardirq_enter();				\
-	} while (0)
-
-#define nmi_exit()						\
-	do {							\
-		trace_hardirq_exit();				\
-		rcu_nmi_exit();					\
-		lockdep_on();					\
-		BUG_ON(!in_nmi());				\
-		sub_preempt_count(NMI_OFFSET + HARDIRQ_OFFSET);	\
-		ftrace_nmi_exit();				\
-	} while (0)
-
-#endif /* LINUX_HARDIRQ_H */
diff --git a/ANDROID_3.4.5/include/linux/hash.h b/ANDROID_3.4.5/include/linux/hash.h
deleted file mode 100644
index b80506bd..00000000
--- a/ANDROID_3.4.5/include/linux/hash.h
+++ /dev/null
@@ -1,70 +0,0 @@
-#ifndef _LINUX_HASH_H
-#define _LINUX_HASH_H
-/* Fast hashing routine for ints,  longs and pointers.
-   (C) 2002 William Lee Irwin III, IBM */
-
-/*
- * Knuth recommends primes in approximately golden ratio to the maximum
- * integer representable by a machine word for multiplicative hashing.
- * Chuck Lever verified the effectiveness of this technique:
- * http://www.citi.umich.edu/techreports/reports/citi-tr-00-1.pdf
- *
- * These primes are chosen to be bit-sparse, that is operations on
- * them can use shifts and additions instead of multiplications for
- * machines where multiplications are slow.
- */
-
-#include <asm/types.h>
-
-/* 2^31 + 2^29 - 2^25 + 2^22 - 2^19 - 2^16 + 1 */
-#define GOLDEN_RATIO_PRIME_32 0x9e370001UL
-/*  2^63 + 2^61 - 2^57 + 2^54 - 2^51 - 2^18 + 1 */
-#define GOLDEN_RATIO_PRIME_64 0x9e37fffffffc0001UL
-
-#if BITS_PER_LONG == 32
-#define GOLDEN_RATIO_PRIME GOLDEN_RATIO_PRIME_32
-#define hash_long(val, bits) hash_32(val, bits)
-#elif BITS_PER_LONG == 64
-#define hash_long(val, bits) hash_64(val, bits)
-#define GOLDEN_RATIO_PRIME GOLDEN_RATIO_PRIME_64
-#else
-#error Wordsize not 32 or 64
-#endif
-
-static inline u64 hash_64(u64 val, unsigned int bits)
-{
-	u64 hash = val;
-
-	/*  Sigh, gcc can't optimise this alone like it does for 32 bits. */
-	u64 n = hash;
-	n <<= 18;
-	hash -= n;
-	n <<= 33;
-	hash -= n;
-	n <<= 3;
-	hash += n;
-	n <<= 3;
-	hash -= n;
-	n <<= 4;
-	hash += n;
-	n <<= 2;
-	hash += n;
-
-	/* High bits are more random, so use them. */
-	return hash >> (64 - bits);
-}
-
-static inline u32 hash_32(u32 val, unsigned int bits)
-{
-	/* On some cpus multiply is faster, on others gcc will do shifts */
-	u32 hash = val * GOLDEN_RATIO_PRIME_32;
-
-	/* High bits are more random, so use them. */
-	return hash >> (32 - bits);
-}
-
-static inline unsigned long hash_ptr(const void *ptr, unsigned int bits)
-{
-	return hash_long((unsigned long)ptr, bits);
-}
-#endif /* _LINUX_HASH_H */
diff --git a/ANDROID_3.4.5/include/linux/hdlc.h b/ANDROID_3.4.5/include/linux/hdlc.h
deleted file mode 100644
index ee275c8b..00000000
--- a/ANDROID_3.4.5/include/linux/hdlc.h
+++ /dev/null
@@ -1,131 +0,0 @@
-/*
- * Generic HDLC support routines for Linux
- *
- * Copyright (C) 1999-2005 Krzysztof Halasa <khc@pm.waw.pl>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of version 2 of the GNU General Public License
- * as published by the Free Software Foundation.
- */
-
-#ifndef __HDLC_H
-#define __HDLC_H
-
-
-#define HDLC_MAX_MTU 1500	/* Ethernet 1500 bytes */
-#if 0
-#define HDLC_MAX_MRU (HDLC_MAX_MTU + 10 + 14 + 4) /* for ETH+VLAN over FR */
-#else
-#define HDLC_MAX_MRU 1600 /* as required for FR network */
-#endif
-
-
-#ifdef __KERNEL__
-
-#include <linux/skbuff.h>
-#include <linux/netdevice.h>
-#include <linux/hdlc/ioctl.h>
-
-/* This structure is a private property of HDLC protocols.
-   Hardware drivers have no interest here */
-
-struct hdlc_proto {
-	int (*open)(struct net_device *dev);
-	void (*close)(struct net_device *dev);
-	void (*start)(struct net_device *dev); /* if open & DCD */
-	void (*stop)(struct net_device *dev); /* if open & !DCD */
-	void (*detach)(struct net_device *dev);
-	int (*ioctl)(struct net_device *dev, struct ifreq *ifr);
-	__be16 (*type_trans)(struct sk_buff *skb, struct net_device *dev);
-	int (*netif_rx)(struct sk_buff *skb);
-	netdev_tx_t (*xmit)(struct sk_buff *skb, struct net_device *dev);
-	struct module *module;
-	struct hdlc_proto *next; /* next protocol in the list */
-};
-
-
-/* Pointed to by netdev_priv(dev) */
-typedef struct hdlc_device {
-	/* used by HDLC layer to take control over HDLC device from hw driver*/
-	int (*attach)(struct net_device *dev,
-		      unsigned short encoding, unsigned short parity);
-
-	/* hardware driver must handle this instead of dev->hard_start_xmit */
-	netdev_tx_t (*xmit)(struct sk_buff *skb, struct net_device *dev);
-
-	/* Things below are for HDLC layer internal use only */
-	const struct hdlc_proto *proto;
-	int carrier;
-	int open;
-	spinlock_t state_lock;
-	void *state;
-	void *priv;
-} hdlc_device;
-
-
-
-/* Exported from hdlc module */
-
-/* Called by hardware driver when a user requests HDLC service */
-int hdlc_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd);
-
-/* Must be used by hardware driver on module startup/exit */
-#define register_hdlc_device(dev)	register_netdev(dev)
-void unregister_hdlc_device(struct net_device *dev);
-
-
-void register_hdlc_protocol(struct hdlc_proto *proto);
-void unregister_hdlc_protocol(struct hdlc_proto *proto);
-
-struct net_device *alloc_hdlcdev(void *priv);
-
-static inline struct hdlc_device* dev_to_hdlc(struct net_device *dev)
-{
-	return netdev_priv(dev);
-}
-
-static __inline__ void debug_frame(const struct sk_buff *skb)
-{
-	int i;
-
-	for (i=0; i < skb->len; i++) {
-		if (i == 100) {
-			printk("...\n");
-			return;
-		}
-		printk(" %02X", skb->data[i]);
-	}
-	printk("\n");
-}
-
-
-/* Must be called by hardware driver when HDLC device is being opened */
-int hdlc_open(struct net_device *dev);
-/* Must be called by hardware driver when HDLC device is being closed */
-void hdlc_close(struct net_device *dev);
-/* May be used by hardware driver */
-int hdlc_change_mtu(struct net_device *dev, int new_mtu);
-/* Must be pointed to by hw driver's dev->netdev_ops->ndo_start_xmit */
-netdev_tx_t hdlc_start_xmit(struct sk_buff *skb, struct net_device *dev);
-
-int attach_hdlc_protocol(struct net_device *dev, struct hdlc_proto *proto,
-			 size_t size);
-/* May be used by hardware driver to gain control over HDLC device */
-void detach_hdlc_protocol(struct net_device *dev);
-
-static __inline__ __be16 hdlc_type_trans(struct sk_buff *skb,
-					 struct net_device *dev)
-{
-	hdlc_device *hdlc = dev_to_hdlc(dev);
-
-	skb->dev = dev;
-	skb_reset_mac_header(skb);
-
-	if (hdlc->proto->type_trans)
-		return hdlc->proto->type_trans(skb, dev);
-	else
-		return htons(ETH_P_HDLC);
-}
-
-#endif /* __KERNEL */
-#endif /* __HDLC_H */
diff --git a/ANDROID_3.4.5/include/linux/hdlc/Kbuild b/ANDROID_3.4.5/include/linux/hdlc/Kbuild
deleted file mode 100644
index 1fb26448..00000000
--- a/ANDROID_3.4.5/include/linux/hdlc/Kbuild
+++ /dev/null
@@ -1 +0,0 @@
-header-y += ioctl.h
diff --git a/ANDROID_3.4.5/include/linux/hdlc/ioctl.h b/ANDROID_3.4.5/include/linux/hdlc/ioctl.h
deleted file mode 100644
index 58397236..00000000
--- a/ANDROID_3.4.5/include/linux/hdlc/ioctl.h
+++ /dev/null
@@ -1,81 +0,0 @@
-#ifndef __HDLC_IOCTL_H__
-#define __HDLC_IOCTL_H__
-
-
-#define GENERIC_HDLC_VERSION 4	/* For synchronization with sethdlc utility */
-
-#define CLOCK_DEFAULT   0	/* Default setting */
-#define CLOCK_EXT	1	/* External TX and RX clock - DTE */
-#define CLOCK_INT	2	/* Internal TX and RX clock - DCE */
-#define CLOCK_TXINT	3	/* Internal TX and external RX clock */
-#define CLOCK_TXFROMRX	4	/* TX clock derived from external RX clock */
-
-
-#define ENCODING_DEFAULT	0 /* Default setting */
-#define ENCODING_NRZ		1
-#define ENCODING_NRZI		2
-#define ENCODING_FM_MARK	3
-#define ENCODING_FM_SPACE	4
-#define ENCODING_MANCHESTER	5
-
-
-#define PARITY_DEFAULT		0 /* Default setting */
-#define PARITY_NONE		1 /* No parity */
-#define PARITY_CRC16_PR0	2 /* CRC16, initial value 0x0000 */
-#define PARITY_CRC16_PR1	3 /* CRC16, initial value 0xFFFF */
-#define PARITY_CRC16_PR0_CCITT	4 /* CRC16, initial 0x0000, ITU-T version */
-#define PARITY_CRC16_PR1_CCITT	5 /* CRC16, initial 0xFFFF, ITU-T version */
-#define PARITY_CRC32_PR0_CCITT	6 /* CRC32, initial value 0x00000000 */
-#define PARITY_CRC32_PR1_CCITT	7 /* CRC32, initial value 0xFFFFFFFF */
-
-#define LMI_DEFAULT		0 /* Default setting */
-#define LMI_NONE		1 /* No LMI, all PVCs are static */
-#define LMI_ANSI		2 /* ANSI Annex D */
-#define LMI_CCITT		3 /* ITU-T Annex A */
-#define LMI_CISCO		4 /* The "original" LMI, aka Gang of Four */
-
-typedef struct { 
-	unsigned int clock_rate; /* bits per second */
-	unsigned int clock_type; /* internal, external, TX-internal etc. */
-	unsigned short loopback;
-} sync_serial_settings;          /* V.35, V.24, X.21 */
-
-typedef struct { 
-	unsigned int clock_rate; /* bits per second */
-	unsigned int clock_type; /* internal, external, TX-internal etc. */
-	unsigned short loopback;
-	unsigned int slot_map;
-} te1_settings;                  /* T1, E1 */
-
-typedef struct {
-	unsigned short encoding;
-	unsigned short parity;
-} raw_hdlc_proto;
-
-typedef struct {
-	unsigned int t391;
-	unsigned int t392;
-	unsigned int n391;
-	unsigned int n392;
-	unsigned int n393;
-	unsigned short lmi;
-	unsigned short dce; /* 1 for DCE (network side) operation */
-} fr_proto;
-
-typedef struct {
-	unsigned int dlci;
-} fr_proto_pvc;          /* for creating/deleting FR PVCs */
-
-typedef struct {
-	unsigned int dlci;
-	char master[IFNAMSIZ];	/* Name of master FRAD device */
-}fr_proto_pvc_info;		/* for returning PVC information only */
-
-typedef struct {
-    unsigned int interval;
-    unsigned int timeout;
-} cisco_proto;
-
-/* PPP doesn't need any info now - supply length = 0 to ioctl */
-
-#endif /* __HDLC_IOCTL_H__ */
diff --git a/ANDROID_3.4.5/include/linux/hdlcdrv.h b/ANDROID_3.4.5/include/linux/hdlcdrv.h
deleted file mode 100644
index c010b4a7..00000000
--- a/ANDROID_3.4.5/include/linux/hdlcdrv.h
+++ /dev/null
@@ -1,377 +0,0 @@
-/*
- * hdlcdrv.h  -- HDLC packet radio network driver.
- * The Linux soundcard driver for 1200 baud and 9600 baud packet radio
- * (C) 1996-1998 by Thomas Sailer, HB9JNX/AE4WA
- */
-
-#ifndef _HDLCDRV_H
-#define _HDLCDRV_H
-
-/* -------------------------------------------------------------------- */
-/*
- * structs for the IOCTL commands
- */
-
-struct hdlcdrv_params {
-	int iobase;
-	int irq;
-	int dma;
-	int dma2;
-	int seriobase;
-	int pariobase;
-	int midiiobase;
-};	
-
-struct hdlcdrv_channel_params {
-	int tx_delay;  /* the transmitter keyup delay in 10ms units */
-	int tx_tail;   /* the transmitter keyoff delay in 10ms units */
-	int slottime;  /* the slottime in 10ms; usually 10 = 100ms */
-	int ppersist;  /* the p-persistence 0..255 */
-	int fulldup;   /* some driver do not support full duplex, setting */
-	               /* this just makes them send even if DCD is on */
-};	
-
-struct hdlcdrv_old_channel_state {
-  	int ptt;
-  	int dcd;
-  	int ptt_keyed;
-};
-
-struct hdlcdrv_channel_state {
- 	int ptt;
- 	int dcd;
- 	int ptt_keyed;
- 	unsigned long tx_packets;
- 	unsigned long tx_errors;
- 	unsigned long rx_packets;
- 	unsigned long rx_errors;
-};
-
-struct hdlcdrv_ioctl {
-	int cmd;
-	union {
-		struct hdlcdrv_params mp;
-		struct hdlcdrv_channel_params cp;
-		struct hdlcdrv_channel_state cs;
-		struct hdlcdrv_old_channel_state ocs;
-		unsigned int calibrate;
-		unsigned char bits;
-		char modename[128];
-		char drivername[32];
-	} data;
-};
-
-/* -------------------------------------------------------------------- */
-
-/*
- * ioctl values
- */
-#define HDLCDRVCTL_GETMODEMPAR       0
-#define HDLCDRVCTL_SETMODEMPAR       1
-#define HDLCDRVCTL_MODEMPARMASK      2  /* not handled by hdlcdrv */
-#define HDLCDRVCTL_GETCHANNELPAR    10
-#define HDLCDRVCTL_SETCHANNELPAR    11
-#define HDLCDRVCTL_OLDGETSTAT       20
-#define HDLCDRVCTL_CALIBRATE        21
-#define HDLCDRVCTL_GETSTAT          22
-
-/*
- * these are mainly for debugging purposes
- */
-#define HDLCDRVCTL_GETSAMPLES       30
-#define HDLCDRVCTL_GETBITS          31
-
-/*
- * not handled by hdlcdrv, but by its depending drivers
- */
-#define HDLCDRVCTL_GETMODE          40
-#define HDLCDRVCTL_SETMODE          41
-#define HDLCDRVCTL_MODELIST         42
-#define HDLCDRVCTL_DRIVERNAME       43
-
-/*
- * mask of needed modem parameters, returned by HDLCDRVCTL_MODEMPARMASK
- */
-#define HDLCDRV_PARMASK_IOBASE      (1<<0)
-#define HDLCDRV_PARMASK_IRQ         (1<<1)
-#define HDLCDRV_PARMASK_DMA         (1<<2)
-#define HDLCDRV_PARMASK_DMA2        (1<<3)
-#define HDLCDRV_PARMASK_SERIOBASE   (1<<4)
-#define HDLCDRV_PARMASK_PARIOBASE   (1<<5)
-#define HDLCDRV_PARMASK_MIDIIOBASE  (1<<6)
-
-/* -------------------------------------------------------------------- */
-
-#ifdef __KERNEL__
-
-#include <linux/netdevice.h>
-#include <linux/if.h>
-#include <linux/spinlock.h>
-
-#define HDLCDRV_MAGIC      0x5ac6e778
-#define HDLCDRV_HDLCBUFFER  32 /* should be a power of 2 for speed reasons */
-#define HDLCDRV_BITBUFFER  256 /* should be a power of 2 for speed reasons */
-#undef HDLCDRV_LOOPBACK  /* define for HDLC debugging purposes */
-#define HDLCDRV_DEBUG
-
-/* maximum packet length, excluding CRC */
-#define HDLCDRV_MAXFLEN             400	
-
-
-struct hdlcdrv_hdlcbuffer {
-	spinlock_t lock;
-	unsigned rd, wr;
-	unsigned short buf[HDLCDRV_HDLCBUFFER];
-};
-
-#ifdef HDLCDRV_DEBUG
-struct hdlcdrv_bitbuffer {
-	unsigned int rd;
-	unsigned int wr;
-	unsigned int shreg;
-	unsigned char buffer[HDLCDRV_BITBUFFER];
-};
-
-static inline void hdlcdrv_add_bitbuffer(struct hdlcdrv_bitbuffer *buf, 
-					 unsigned int bit)
-{
-	unsigned char new;
-
-	new = buf->shreg & 1;
-	buf->shreg >>= 1;
-	buf->shreg |= (!!bit) << 7;
-	if (new) {
-		buf->buffer[buf->wr] = buf->shreg;
-		buf->wr = (buf->wr+1) % sizeof(buf->buffer);
-		buf->shreg = 0x80;
-	}
-}
-
-static inline void hdlcdrv_add_bitbuffer_word(struct hdlcdrv_bitbuffer *buf, 
-					      unsigned int bits)
-{
-	buf->buffer[buf->wr] = bits & 0xff;
-	buf->wr = (buf->wr+1) % sizeof(buf->buffer);
-	buf->buffer[buf->wr] = (bits >> 8) & 0xff;
-	buf->wr = (buf->wr+1) % sizeof(buf->buffer);
-
-}
-#endif /* HDLCDRV_DEBUG */
-
-/* -------------------------------------------------------------------- */
-/*
- * Information that need to be kept for each driver. 
- */
-
-struct hdlcdrv_ops {
-	/*
-	 * first some informations needed by the hdlcdrv routines
-	 */
-	const char *drvname;
-	const char *drvinfo;
-	/*
-	 * the routines called by the hdlcdrv routines
-	 */
-	int (*open)(struct net_device *);
-	int (*close)(struct net_device *);
-	int (*ioctl)(struct net_device *, struct ifreq *, 
-		     struct hdlcdrv_ioctl *, int);
-};
-
-struct hdlcdrv_state {
-	int magic;
-	int opened;
-
-	const struct hdlcdrv_ops *ops;
-
-	struct {
-		int bitrate;
-	} par;
-
-	struct hdlcdrv_pttoutput {
-		int dma2;
-		int seriobase;
-		int pariobase;
-		int midiiobase;
-		unsigned int flags;
-	} ptt_out;
-
-	struct hdlcdrv_channel_params ch_params;
-
-	struct hdlcdrv_hdlcrx {
-		struct hdlcdrv_hdlcbuffer hbuf;
-		unsigned long in_hdlc_rx;
-		/* 0 = sync hunt, != 0 receiving */
-		int rx_state;	
-		unsigned int bitstream;
-		unsigned int bitbuf;
-		int numbits;
-		unsigned char dcd;
-		
-		int len;
-		unsigned char *bp;
-		unsigned char buffer[HDLCDRV_MAXFLEN+2];
-	} hdlcrx;
-
-	struct hdlcdrv_hdlctx {
-		struct hdlcdrv_hdlcbuffer hbuf;
-		unsigned long in_hdlc_tx;
-		/*
-		 * 0 = send flags
-		 * 1 = send txtail (flags)
-		 * 2 = send packet
-		 */
-		int tx_state;	
-		int numflags;
-		unsigned int bitstream;
-		unsigned char ptt;
-		int calibrate;
-		int slotcnt;
-
-		unsigned int bitbuf;
-		int numbits;
-		
-		int len;
-		unsigned char *bp;
-		unsigned char buffer[HDLCDRV_MAXFLEN+2];
-	} hdlctx;
-
-#ifdef HDLCDRV_DEBUG
-	struct hdlcdrv_bitbuffer bitbuf_channel;
-	struct hdlcdrv_bitbuffer bitbuf_hdlc;
-#endif /* HDLCDRV_DEBUG */
-
-	int ptt_keyed;
-
-	/* queued skb for transmission */
-	struct sk_buff *skb;
-};
-
-
-/* -------------------------------------------------------------------- */
-
-static inline int hdlcdrv_hbuf_full(struct hdlcdrv_hdlcbuffer *hb) 
-{
-	unsigned long flags;
-	int ret;
-	
-	spin_lock_irqsave(&hb->lock, flags);
-	ret = !((HDLCDRV_HDLCBUFFER - 1 + hb->rd - hb->wr) % HDLCDRV_HDLCBUFFER);
-	spin_unlock_irqrestore(&hb->lock, flags);
-	return ret;
-}
-
-/* -------------------------------------------------------------------- */
-
-static inline int hdlcdrv_hbuf_empty(struct hdlcdrv_hdlcbuffer *hb)
-{
-	unsigned long flags;
-	int ret;
-	
-	spin_lock_irqsave(&hb->lock, flags);
-	ret = (hb->rd == hb->wr);
-	spin_unlock_irqrestore(&hb->lock, flags);
-	return ret;
-}
-
-/* -------------------------------------------------------------------- */
-
-static inline unsigned short hdlcdrv_hbuf_get(struct hdlcdrv_hdlcbuffer *hb)
-{
-	unsigned long flags;
-	unsigned short val;
-	unsigned newr;
-
-	spin_lock_irqsave(&hb->lock, flags);
-	if (hb->rd == hb->wr)
-		val = 0;
-	else {
-		newr = (hb->rd+1) % HDLCDRV_HDLCBUFFER;
-		val = hb->buf[hb->rd];
-		hb->rd = newr;
-	}
-	spin_unlock_irqrestore(&hb->lock, flags);
-	return val;
-}
-
-/* -------------------------------------------------------------------- */
-
-static inline void hdlcdrv_hbuf_put(struct hdlcdrv_hdlcbuffer *hb, 
-				    unsigned short val)
-{
-	unsigned newp;
-	unsigned long flags;
-	
-	spin_lock_irqsave(&hb->lock, flags);
-	newp = (hb->wr+1) % HDLCDRV_HDLCBUFFER;
-	if (newp != hb->rd) { 
-		hb->buf[hb->wr] = val & 0xffff;
-		hb->wr = newp;
-	}
-	spin_unlock_irqrestore(&hb->lock, flags);
-}
-
-/* -------------------------------------------------------------------- */
-
-static inline void hdlcdrv_putbits(struct hdlcdrv_state *s, unsigned int bits)
-{
-	hdlcdrv_hbuf_put(&s->hdlcrx.hbuf, bits);
-}
-
-static inline unsigned int hdlcdrv_getbits(struct hdlcdrv_state *s)
-{
-	unsigned int ret;
-
-	if (hdlcdrv_hbuf_empty(&s->hdlctx.hbuf)) {
-		if (s->hdlctx.calibrate > 0)
-			s->hdlctx.calibrate--;
-		else
-			s->hdlctx.ptt = 0;
-		ret = 0;
-	} else 
-		ret = hdlcdrv_hbuf_get(&s->hdlctx.hbuf);
-#ifdef HDLCDRV_LOOPBACK
-	hdlcdrv_hbuf_put(&s->hdlcrx.hbuf, ret);
-#endif /* HDLCDRV_LOOPBACK */
-	return ret;
-}
-
-static inline void hdlcdrv_channelbit(struct hdlcdrv_state *s, unsigned int bit)
-{
-#ifdef HDLCDRV_DEBUG
-	hdlcdrv_add_bitbuffer(&s->bitbuf_channel, bit);
-#endif /* HDLCDRV_DEBUG */
-}
-
-static inline void hdlcdrv_setdcd(struct hdlcdrv_state *s, int dcd)
-{
-	s->hdlcrx.dcd = !!dcd;
-}
-
-static inline int hdlcdrv_ptt(struct hdlcdrv_state *s)
-{
-	return s->hdlctx.ptt || (s->hdlctx.calibrate > 0);
-}
-
-/* -------------------------------------------------------------------- */
-
-void hdlcdrv_receiver(struct net_device *, struct hdlcdrv_state *);
-void hdlcdrv_transmitter(struct net_device *, struct hdlcdrv_state *);
-void hdlcdrv_arbitrate(struct net_device *, struct hdlcdrv_state *);
-struct net_device *hdlcdrv_register(const struct hdlcdrv_ops *ops,
-				    unsigned int privsize, const char *ifname,
-				    unsigned int baseaddr, unsigned int irq, 
-				    unsigned int dma);
-void hdlcdrv_unregister(struct net_device *dev);
-
-/* -------------------------------------------------------------------- */
-
-
-
-#endif /* __KERNEL__ */
-
-/* -------------------------------------------------------------------- */
-
-#endif /* _HDLCDRV_H */
-
-/* -------------------------------------------------------------------- */
diff --git a/ANDROID_3.4.5/include/linux/hdreg.h b/ANDROID_3.4.5/include/linux/hdreg.h
deleted file mode 100644
index 29ee2873..00000000
--- a/ANDROID_3.4.5/include/linux/hdreg.h
+++ /dev/null
@@ -1,658 +0,0 @@
-#ifndef _LINUX_HDREG_H
-#define _LINUX_HDREG_H
-
-#include <linux/types.h>
-
-/*
- * Command Header sizes for IOCTL commands
- */
-
-#define HDIO_DRIVE_CMD_HDR_SIZE		(4 * sizeof(__u8))
-#define HDIO_DRIVE_HOB_HDR_SIZE		(8 * sizeof(__u8))
-#define HDIO_DRIVE_TASK_HDR_SIZE	(8 * sizeof(__u8))
-
-#define IDE_DRIVE_TASK_NO_DATA		0
-#ifndef __KERNEL__
-#define IDE_DRIVE_TASK_INVALID		-1
-#define IDE_DRIVE_TASK_SET_XFER		1
-#define IDE_DRIVE_TASK_IN		2
-#define IDE_DRIVE_TASK_OUT		3
-#endif
-#define IDE_DRIVE_TASK_RAW_WRITE	4
-
-/*
- * Define standard taskfile in/out register
- */
-#define IDE_TASKFILE_STD_IN_FLAGS	0xFE
-#define IDE_HOB_STD_IN_FLAGS		0x3C
-#ifndef __KERNEL__
-#define IDE_TASKFILE_STD_OUT_FLAGS	0xFE
-#define IDE_HOB_STD_OUT_FLAGS		0x3C
-
-typedef unsigned char task_ioreg_t;
-typedef unsigned long sata_ioreg_t;
-#endif
-
-typedef union ide_reg_valid_s {
-	unsigned all				: 16;
-	struct {
-		unsigned data			: 1;
-		unsigned error_feature		: 1;
-		unsigned sector			: 1;
-		unsigned nsector		: 1;
-		unsigned lcyl			: 1;
-		unsigned hcyl			: 1;
-		unsigned select			: 1;
-		unsigned status_command		: 1;
-
-		unsigned data_hob		: 1;
-		unsigned error_feature_hob	: 1;
-		unsigned sector_hob		: 1;
-		unsigned nsector_hob		: 1;
-		unsigned lcyl_hob		: 1;
-		unsigned hcyl_hob		: 1;
-		unsigned select_hob		: 1;
-		unsigned control_hob		: 1;
-	} b;
-} ide_reg_valid_t;
-
-typedef struct ide_task_request_s {
-	__u8		io_ports[8];
-	__u8		hob_ports[8]; /* bytes 6 and 7 are unused */
-	ide_reg_valid_t	out_flags;
-	ide_reg_valid_t	in_flags;
-	int		data_phase;
-	int		req_cmd;
-	unsigned long	out_size;
-	unsigned long	in_size;
-} ide_task_request_t;
-
-typedef struct ide_ioctl_request_s {
-	ide_task_request_t	*task_request;
-	unsigned char		*out_buffer;
-	unsigned char		*in_buffer;
-} ide_ioctl_request_t;
-
-struct hd_drive_cmd_hdr {
-	__u8 command;
-	__u8 sector_number;
-	__u8 feature;
-	__u8 sector_count;
-};
-
-#ifndef __KERNEL__
-typedef struct hd_drive_task_hdr {
-	__u8 data;
-	__u8 feature;
-	__u8 sector_count;
-	__u8 sector_number;
-	__u8 low_cylinder;
-	__u8 high_cylinder;
-	__u8 device_head;
-	__u8 command;
-} task_struct_t;
-
-typedef struct hd_drive_hob_hdr {
-	__u8 data;
-	__u8 feature;
-	__u8 sector_count;
-	__u8 sector_number;
-	__u8 low_cylinder;
-	__u8 high_cylinder;
-	__u8 device_head;
-	__u8 control;
-} hob_struct_t;
-#endif
-
-#define TASKFILE_NO_DATA		0x0000
-
-#define TASKFILE_IN			0x0001
-#define TASKFILE_MULTI_IN		0x0002
-
-#define TASKFILE_OUT			0x0004
-#define TASKFILE_MULTI_OUT		0x0008
-#define TASKFILE_IN_OUT			0x0010
-
-#define TASKFILE_IN_DMA			0x0020
-#define TASKFILE_OUT_DMA		0x0040
-#define TASKFILE_IN_DMAQ		0x0080
-#define TASKFILE_OUT_DMAQ		0x0100
-
-#ifndef __KERNEL__
-#define TASKFILE_P_IN			0x0200
-#define TASKFILE_P_OUT			0x0400
-#define TASKFILE_P_IN_DMA		0x0800
-#define TASKFILE_P_OUT_DMA		0x1000
-#define TASKFILE_P_IN_DMAQ		0x2000
-#define TASKFILE_P_OUT_DMAQ		0x4000
-#define TASKFILE_48			0x8000
-#define TASKFILE_INVALID		0x7fff
-#endif
-
-#ifndef __KERNEL__
-/* ATA/ATAPI Commands pre T13 Spec */
-#define WIN_NOP				0x00
-/*
- *	0x01->0x02 Reserved
- */
-#define CFA_REQ_EXT_ERROR_CODE		0x03 /* CFA Request Extended Error Code */
-/*
- *	0x04->0x07 Reserved
- */
-#define WIN_SRST			0x08 /* ATAPI soft reset command */
-#define WIN_DEVICE_RESET		0x08
-/*
- *	0x09->0x0F Reserved
- */
-#define WIN_RECAL			0x10
-#define WIN_RESTORE			WIN_RECAL
-/*
- *	0x10->0x1F Reserved
- */
-#define WIN_READ			0x20 /* 28-Bit */
-#define WIN_READ_ONCE			0x21 /* 28-Bit without retries */
-#define WIN_READ_LONG			0x22 /* 28-Bit */
-#define WIN_READ_LONG_ONCE		0x23 /* 28-Bit without retries */
-#define WIN_READ_EXT			0x24 /* 48-Bit */
-#define WIN_READDMA_EXT			0x25 /* 48-Bit */
-#define WIN_READDMA_QUEUED_EXT		0x26 /* 48-Bit */
-#define WIN_READ_NATIVE_MAX_EXT		0x27 /* 48-Bit */
-/*
- *	0x28
- */
-#define WIN_MULTREAD_EXT		0x29 /* 48-Bit */
-/*
- *	0x2A->0x2F Reserved
- */
-#define WIN_WRITE			0x30 /* 28-Bit */
-#define WIN_WRITE_ONCE			0x31 /* 28-Bit without retries */
-#define WIN_WRITE_LONG			0x32 /* 28-Bit */
-#define WIN_WRITE_LONG_ONCE		0x33 /* 28-Bit without retries */
-#define WIN_WRITE_EXT			0x34 /* 48-Bit */
-#define WIN_WRITEDMA_EXT		0x35 /* 48-Bit */
-#define WIN_WRITEDMA_QUEUED_EXT		0x36 /* 48-Bit */
-#define WIN_SET_MAX_EXT			0x37 /* 48-Bit */
-#define CFA_WRITE_SECT_WO_ERASE		0x38 /* CFA Write Sectors without erase */
-#define WIN_MULTWRITE_EXT		0x39 /* 48-Bit */
-/*
- *	0x3A->0x3B Reserved
- */
-#define WIN_WRITE_VERIFY		0x3C /* 28-Bit */
-/*
- *	0x3D->0x3F Reserved
- */
-#define WIN_VERIFY			0x40 /* 28-Bit - Read Verify Sectors */
-#define WIN_VERIFY_ONCE			0x41 /* 28-Bit - without retries */
-#define WIN_VERIFY_EXT			0x42 /* 48-Bit */
-/*
- *	0x43->0x4F Reserved
- */
-#define WIN_FORMAT			0x50
-/*
- *	0x51->0x5F Reserved
- */
-#define WIN_INIT			0x60
-/*
- *	0x61->0x5F Reserved
- */
-#define WIN_SEEK			0x70 /* 0x70-0x7F Reserved */
-
-#define CFA_TRANSLATE_SECTOR		0x87 /* CFA Translate Sector */
-#define WIN_DIAGNOSE			0x90
-#define WIN_SPECIFY			0x91 /* set drive geometry translation */
-#define WIN_DOWNLOAD_MICROCODE		0x92
-#define WIN_STANDBYNOW2			0x94
-#define WIN_STANDBY2			0x96
-#define WIN_SETIDLE2			0x97
-#define WIN_CHECKPOWERMODE2		0x98
-#define WIN_SLEEPNOW2			0x99
-/*
- *	0x9A VENDOR
- */
-#define WIN_PACKETCMD			0xA0 /* Send a packet command. */
-#define WIN_PIDENTIFY			0xA1 /* identify ATAPI device	*/
-#define WIN_QUEUED_SERVICE		0xA2
-#define WIN_SMART			0xB0 /* self-monitoring and reporting */
-#define CFA_ERASE_SECTORS		0xC0
-#define WIN_MULTREAD			0xC4 /* read sectors using multiple mode*/
-#define WIN_MULTWRITE			0xC5 /* write sectors using multiple mode */
-#define WIN_SETMULT			0xC6 /* enable/disable multiple mode */
-#define WIN_READDMA_QUEUED		0xC7 /* read sectors using Queued DMA transfers */
-#define WIN_READDMA			0xC8 /* read sectors using DMA transfers */
-#define WIN_READDMA_ONCE		0xC9 /* 28-Bit - without retries */
-#define WIN_WRITEDMA			0xCA /* write sectors using DMA transfers */
-#define WIN_WRITEDMA_ONCE		0xCB /* 28-Bit - without retries */
-#define WIN_WRITEDMA_QUEUED		0xCC /* write sectors using Queued DMA transfers */
-#define CFA_WRITE_MULTI_WO_ERASE	0xCD /* CFA Write multiple without erase */
-#define WIN_GETMEDIASTATUS		0xDA
-#define WIN_ACKMEDIACHANGE		0xDB /* ATA-1, ATA-2 vendor */
-#define WIN_POSTBOOT			0xDC
-#define WIN_PREBOOT 			0xDD
-#define WIN_DOORLOCK			0xDE /* lock door on removable drives */
-#define WIN_DOORUNLOCK			0xDF /* unlock door on removable drives */
-#define WIN_STANDBYNOW1			0xE0
-#define WIN_IDLEIMMEDIATE		0xE1 /* force drive to become "ready" */
-#define WIN_STANDBY			0xE2 /* Set device in Standby Mode */
-#define WIN_SETIDLE1			0xE3
-#define WIN_READ_BUFFER			0xE4 /* force read only 1 sector */
-#define WIN_CHECKPOWERMODE1		0xE5
-#define WIN_SLEEPNOW1			0xE6
-#define WIN_FLUSH_CACHE			0xE7
-#define WIN_WRITE_BUFFER		0xE8 /* force write only 1 sector */
-#define WIN_WRITE_SAME			0xE9 /* read ata-2 to use */
-	/* SET_FEATURES 0x22 or 0xDD */
-#define WIN_FLUSH_CACHE_EXT		0xEA /* 48-Bit */
-#define WIN_IDENTIFY			0xEC /* ask drive to identify itself	*/
-#define WIN_MEDIAEJECT			0xED
-#define WIN_IDENTIFY_DMA		0xEE /* same as WIN_IDENTIFY, but DMA */
-#define WIN_SETFEATURES			0xEF /* set special drive features */
-#define EXABYTE_ENABLE_NEST		0xF0
-#define WIN_SECURITY_SET_PASS		0xF1
-#define WIN_SECURITY_UNLOCK		0xF2
-#define WIN_SECURITY_ERASE_PREPARE	0xF3
-#define WIN_SECURITY_ERASE_UNIT		0xF4
-#define WIN_SECURITY_FREEZE_LOCK	0xF5
-#define WIN_SECURITY_DISABLE		0xF6
-#define WIN_READ_NATIVE_MAX		0xF8 /* return the native maximum address */
-#define WIN_SET_MAX			0xF9
-#define DISABLE_SEAGATE			0xFB
-
-/* WIN_SMART sub-commands */
-
-#define SMART_READ_VALUES		0xD0
-#define SMART_READ_THRESHOLDS		0xD1
-#define SMART_AUTOSAVE			0xD2
-#define SMART_SAVE			0xD3
-#define SMART_IMMEDIATE_OFFLINE		0xD4
-#define SMART_READ_LOG_SECTOR		0xD5
-#define SMART_WRITE_LOG_SECTOR		0xD6
-#define SMART_WRITE_THRESHOLDS		0xD7
-#define SMART_ENABLE			0xD8
-#define SMART_DISABLE			0xD9
-#define SMART_STATUS			0xDA
-#define SMART_AUTO_OFFLINE		0xDB
-
-/* Password used in TF4 & TF5 executing SMART commands */
-
-#define SMART_LCYL_PASS			0x4F
-#define SMART_HCYL_PASS			0xC2
-
-/* WIN_SETFEATURES sub-commands */
-#define SETFEATURES_EN_8BIT	0x01	/* Enable 8-Bit Transfers */
-#define SETFEATURES_EN_WCACHE	0x02	/* Enable write cache */
-#define SETFEATURES_DIS_DEFECT	0x04	/* Disable Defect Management */
-#define SETFEATURES_EN_APM	0x05	/* Enable advanced power management */
-#define SETFEATURES_EN_SAME_R	0x22	/* for a region ATA-1 */
-#define SETFEATURES_DIS_MSN	0x31	/* Disable Media Status Notification */
-#define SETFEATURES_DIS_RETRY	0x33	/* Disable Retry */
-#define SETFEATURES_EN_AAM	0x42	/* Enable Automatic Acoustic Management */
-#define SETFEATURES_RW_LONG	0x44	/* Set Length of VS bytes */
-#define SETFEATURES_SET_CACHE	0x54	/* Set Cache segments to SC Reg. Val */
-#define SETFEATURES_DIS_RLA	0x55	/* Disable read look-ahead feature */
-#define SETFEATURES_EN_RI	0x5D	/* Enable release interrupt */
-#define SETFEATURES_EN_SI	0x5E	/* Enable SERVICE interrupt */
-#define SETFEATURES_DIS_RPOD	0x66	/* Disable reverting to power on defaults */
-#define SETFEATURES_DIS_ECC	0x77	/* Disable ECC byte count */
-#define SETFEATURES_DIS_8BIT	0x81	/* Disable 8-Bit Transfers */
-#define SETFEATURES_DIS_WCACHE	0x82	/* Disable write cache */
-#define SETFEATURES_EN_DEFECT	0x84	/* Enable Defect Management */
-#define SETFEATURES_DIS_APM	0x85	/* Disable advanced power management */
-#define SETFEATURES_EN_ECC	0x88	/* Enable ECC byte count */
-#define SETFEATURES_EN_MSN	0x95	/* Enable Media Status Notification */
-#define SETFEATURES_EN_RETRY	0x99	/* Enable Retry */
-#define SETFEATURES_EN_RLA	0xAA	/* Enable read look-ahead feature */
-#define SETFEATURES_PREFETCH	0xAB	/* Sets drive prefetch value */
-#define SETFEATURES_EN_REST	0xAC	/* ATA-1 */
-#define SETFEATURES_4B_RW_LONG	0xBB	/* Set Length of 4 bytes */
-#define SETFEATURES_DIS_AAM	0xC2	/* Disable Automatic Acoustic Management */
-#define SETFEATURES_EN_RPOD	0xCC	/* Enable reverting to power on defaults */
-#define SETFEATURES_DIS_RI	0xDD	/* Disable release interrupt ATAPI */
-#define SETFEATURES_EN_SAME_M	0xDD	/* for a entire device ATA-1 */
-#define SETFEATURES_DIS_SI	0xDE	/* Disable SERVICE interrupt ATAPI */
-
-/* WIN_SECURITY sub-commands */
-
-#define SECURITY_SET_PASSWORD		0xBA
-#define SECURITY_UNLOCK			0xBB
-#define SECURITY_ERASE_PREPARE		0xBC
-#define SECURITY_ERASE_UNIT		0xBD
-#define SECURITY_FREEZE_LOCK		0xBE
-#define SECURITY_DISABLE_PASSWORD	0xBF
-#endif /* __KERNEL__ */
-
-struct hd_geometry {
-      unsigned char heads;
-      unsigned char sectors;
-      unsigned short cylinders;
-      unsigned long start;
-};
-
-/* hd/ide ctl's that pass (arg) ptrs to user space are numbered 0x030n/0x031n */
-#define HDIO_GETGEO		0x0301	/* get device geometry */
-#define HDIO_GET_UNMASKINTR	0x0302	/* get current unmask setting */
-#define HDIO_GET_MULTCOUNT	0x0304	/* get current IDE blockmode setting */
-#define HDIO_GET_QDMA		0x0305	/* get use-qdma flag */
-
-#define HDIO_SET_XFER		0x0306  /* set transfer rate via proc */
-
-#define HDIO_OBSOLETE_IDENTITY	0x0307	/* OBSOLETE, DO NOT USE: returns 142 bytes */
-#define HDIO_GET_KEEPSETTINGS	0x0308	/* get keep-settings-on-reset flag */
-#define HDIO_GET_32BIT		0x0309	/* get current io_32bit setting */
-#define HDIO_GET_NOWERR		0x030a	/* get ignore-write-error flag */
-#define HDIO_GET_DMA		0x030b	/* get use-dma flag */
-#define HDIO_GET_NICE		0x030c	/* get nice flags */
-#define HDIO_GET_IDENTITY	0x030d	/* get IDE identification info */
-#define HDIO_GET_WCACHE		0x030e	/* get write cache mode on|off */
-#define HDIO_GET_ACOUSTIC	0x030f	/* get acoustic value */
-#define	HDIO_GET_ADDRESS	0x0310	/* */
-
-#define HDIO_GET_BUSSTATE	0x031a	/* get the bus state of the hwif */
-#define HDIO_TRISTATE_HWIF	0x031b	/* execute a channel tristate */
-#define HDIO_DRIVE_RESET	0x031c	/* execute a device reset */
-#define HDIO_DRIVE_TASKFILE	0x031d	/* execute raw taskfile */
-#define HDIO_DRIVE_TASK		0x031e	/* execute task and special drive command */
-#define HDIO_DRIVE_CMD		0x031f	/* execute a special drive command */
-#define HDIO_DRIVE_CMD_AEB	HDIO_DRIVE_TASK
-
-/* hd/ide ctl's that pass (arg) non-ptr values are numbered 0x032n/0x033n */
-#define HDIO_SET_MULTCOUNT	0x0321	/* change IDE blockmode */
-#define HDIO_SET_UNMASKINTR	0x0322	/* permit other irqs during I/O */
-#define HDIO_SET_KEEPSETTINGS	0x0323	/* keep ioctl settings on reset */
-#define HDIO_SET_32BIT		0x0324	/* change io_32bit flags */
-#define HDIO_SET_NOWERR		0x0325	/* change ignore-write-error flag */
-#define HDIO_SET_DMA		0x0326	/* change use-dma flag */
-#define HDIO_SET_PIO_MODE	0x0327	/* reconfig interface to new speed */
-#ifndef __KERNEL__
-#define HDIO_SCAN_HWIF		0x0328	/* register and (re)scan interface */
-#define HDIO_UNREGISTER_HWIF	0x032a  /* unregister interface */
-#endif
-#define HDIO_SET_NICE		0x0329	/* set nice flags */
-#define HDIO_SET_WCACHE		0x032b	/* change write cache enable-disable */
-#define HDIO_SET_ACOUSTIC	0x032c	/* change acoustic behavior */
-#define HDIO_SET_BUSSTATE	0x032d	/* set the bus state of the hwif */
-#define HDIO_SET_QDMA		0x032e	/* change use-qdma flag */
-#define HDIO_SET_ADDRESS	0x032f	/* change lba addressing modes */
-
-/* bus states */
-enum {
-	BUSSTATE_OFF = 0,
-	BUSSTATE_ON,
-	BUSSTATE_TRISTATE
-};
-
-/* hd/ide ctl's that pass (arg) ptrs to user space are numbered 0x033n/0x033n */
-/* 0x330 is reserved - used to be HDIO_GETGEO_BIG */
-/* 0x331 is reserved - used to be HDIO_GETGEO_BIG_RAW */
-/* 0x338 is reserved - used to be HDIO_SET_IDE_SCSI */
-/* 0x339 is reserved - used to be HDIO_SET_SCSI_IDE */
-
-#define __NEW_HD_DRIVE_ID
-
-#ifndef __KERNEL__
-/*
- * Structure returned by HDIO_GET_IDENTITY, as per ANSI NCITS ATA6 rev.1b spec.
- *
- * If you change something here, please remember to update fix_driveid() in
- * ide/probe.c.
- */
-struct hd_driveid {
-	unsigned short	config;		/* lots of obsolete bit flags */
-	unsigned short	cyls;		/* Obsolete, "physical" cyls */
-	unsigned short	reserved2;	/* reserved (word 2) */
-	unsigned short	heads;		/* Obsolete, "physical" heads */
-	unsigned short	track_bytes;	/* unformatted bytes per track */
-	unsigned short	sector_bytes;	/* unformatted bytes per sector */
-	unsigned short	sectors;	/* Obsolete, "physical" sectors per track */
-	unsigned short	vendor0;	/* vendor unique */
-	unsigned short	vendor1;	/* vendor unique */
-	unsigned short	vendor2;	/* Retired vendor unique */
-	unsigned char	serial_no[20];	/* 0 = not_specified */
-	unsigned short	buf_type;	/* Retired */
-	unsigned short	buf_size;	/* Retired, 512 byte increments
-					 * 0 = not_specified
-					 */
-	unsigned short	ecc_bytes;	/* for r/w long cmds; 0 = not_specified */
-	unsigned char	fw_rev[8];	/* 0 = not_specified */
-	unsigned char	model[40];	/* 0 = not_specified */
-	unsigned char	max_multsect;	/* 0=not_implemented */
-	unsigned char	vendor3;	/* vendor unique */
-	unsigned short	dword_io;	/* 0=not_implemented; 1=implemented */
-	unsigned char	vendor4;	/* vendor unique */
-	unsigned char	capability;	/* (upper byte of word 49)
-					 *  3:	IORDYsup
-					 *  2:	IORDYsw
-					 *  1:	LBA
-					 *  0:	DMA
-					 */
-	unsigned short	reserved50;	/* reserved (word 50) */
-	unsigned char	vendor5;	/* Obsolete, vendor unique */
-	unsigned char	tPIO;		/* Obsolete, 0=slow, 1=medium, 2=fast */
-	unsigned char	vendor6;	/* Obsolete, vendor unique */
-	unsigned char	tDMA;		/* Obsolete, 0=slow, 1=medium, 2=fast */
-	unsigned short	field_valid;	/* (word 53)
-					 *  2:	ultra_ok	word  88
-					 *  1:	eide_ok		words 64-70
-					 *  0:	cur_ok		words 54-58
-					 */
-	unsigned short	cur_cyls;	/* Obsolete, logical cylinders */
-	unsigned short	cur_heads;	/* Obsolete, l heads */
-	unsigned short	cur_sectors;	/* Obsolete, l sectors per track */
-	unsigned short	cur_capacity0;	/* Obsolete, l total sectors on drive */
-	unsigned short	cur_capacity1;	/* Obsolete, (2 words, misaligned int)     */
-	unsigned char	multsect;	/* current multiple sector count */
-	unsigned char	multsect_valid;	/* when (bit0==1) multsect is ok */
-	unsigned int	lba_capacity;	/* Obsolete, total number of sectors */
-	unsigned short	dma_1word;	/* Obsolete, single-word dma info */
-	unsigned short	dma_mword;	/* multiple-word dma info */
-	unsigned short  eide_pio_modes; /* bits 0:mode3 1:mode4 */
-	unsigned short  eide_dma_min;	/* min mword dma cycle time (ns) */
-	unsigned short  eide_dma_time;	/* recommended mword dma cycle time (ns) */
-	unsigned short  eide_pio;       /* min cycle time (ns), no IORDY  */
-	unsigned short  eide_pio_iordy; /* min cycle time (ns), with IORDY */
-	unsigned short	words69_70[2];	/* reserved words 69-70
-					 * future command overlap and queuing
-					 */
-	unsigned short	words71_74[4];	/* reserved words 71-74
-					 * for IDENTIFY PACKET DEVICE command
-					 */
-	unsigned short  queue_depth;	/* (word 75)
-					 * 15:5	reserved
-					 *  4:0	Maximum queue depth -1
-					 */
-	unsigned short  words76_79[4];	/* reserved words 76-79 */
-	unsigned short  major_rev_num;	/* (word 80) */
-	unsigned short  minor_rev_num;	/* (word 81) */
-	unsigned short  command_set_1;	/* (word 82) supported
-					 * 15:	Obsolete
-					 * 14:	NOP command
-					 * 13:	READ_BUFFER
-					 * 12:	WRITE_BUFFER
-					 * 11:	Obsolete
-					 * 10:	Host Protected Area
-					 *  9:	DEVICE Reset
-					 *  8:	SERVICE Interrupt
-					 *  7:	Release Interrupt
-					 *  6:	look-ahead
-					 *  5:	write cache
-					 *  4:	PACKET Command
-					 *  3:	Power Management Feature Set
-					 *  2:	Removable Feature Set
-					 *  1:	Security Feature Set
-					 *  0:	SMART Feature Set
-					 */
-	unsigned short  command_set_2;	/* (word 83)
-					 * 15:	Shall be ZERO
-					 * 14:	Shall be ONE
-					 * 13:	FLUSH CACHE EXT
-					 * 12:	FLUSH CACHE
-					 * 11:	Device Configuration Overlay
-					 * 10:	48-bit Address Feature Set
-					 *  9:	Automatic Acoustic Management
-					 *  8:	SET MAX security
-					 *  7:	reserved 1407DT PARTIES
-					 *  6:	SetF sub-command Power-Up
-					 *  5:	Power-Up in Standby Feature Set
-					 *  4:	Removable Media Notification
-					 *  3:	APM Feature Set
-					 *  2:	CFA Feature Set
-					 *  1:	READ/WRITE DMA QUEUED
-					 *  0:	Download MicroCode
-					 */
-	unsigned short  cfsse;		/* (word 84)
-					 * cmd set-feature supported extensions
-					 * 15:	Shall be ZERO
-					 * 14:	Shall be ONE
-					 * 13:6	reserved
-					 *  5:	General Purpose Logging
-					 *  4:	Streaming Feature Set
-					 *  3:	Media Card Pass Through
-					 *  2:	Media Serial Number Valid
-					 *  1:	SMART selt-test supported
-					 *  0:	SMART error logging
-					 */
-	unsigned short  cfs_enable_1;	/* (word 85)
-					 * command set-feature enabled
-					 * 15:	Obsolete
-					 * 14:	NOP command
-					 * 13:	READ_BUFFER
-					 * 12:	WRITE_BUFFER
-					 * 11:	Obsolete
-					 * 10:	Host Protected Area
-					 *  9:	DEVICE Reset
-					 *  8:	SERVICE Interrupt
-					 *  7:	Release Interrupt
-					 *  6:	look-ahead
-					 *  5:	write cache
-					 *  4:	PACKET Command
-					 *  3:	Power Management Feature Set
-					 *  2:	Removable Feature Set
-					 *  1:	Security Feature Set
-					 *  0:	SMART Feature Set
-					 */
-	unsigned short  cfs_enable_2;	/* (word 86)
-					 * command set-feature enabled
-					 * 15:	Shall be ZERO
-					 * 14:	Shall be ONE
-					 * 13:	FLUSH CACHE EXT
-					 * 12:	FLUSH CACHE
-					 * 11:	Device Configuration Overlay
-					 * 10:	48-bit Address Feature Set
-					 *  9:	Automatic Acoustic Management
-					 *  8:	SET MAX security
-					 *  7:	reserved 1407DT PARTIES
-					 *  6:	SetF sub-command Power-Up
-					 *  5:	Power-Up in Standby Feature Set
-					 *  4:	Removable Media Notification
-					 *  3:	APM Feature Set
-					 *  2:	CFA Feature Set
-					 *  1:	READ/WRITE DMA QUEUED
-					 *  0:	Download MicroCode
-					 */
-	unsigned short  csf_default;	/* (word 87)
-					 * command set-feature default
-					 * 15:	Shall be ZERO
-					 * 14:	Shall be ONE
-					 * 13:6	reserved
-					 *  5:	General Purpose Logging enabled
-					 *  4:	Valid CONFIGURE STREAM executed
-					 *  3:	Media Card Pass Through enabled
-					 *  2:	Media Serial Number Valid
-					 *  1:	SMART selt-test supported
-					 *  0:	SMART error logging
-					 */
-	unsigned short  dma_ultra;	/* (word 88) */
-	unsigned short	trseuc;		/* time required for security erase */
-	unsigned short	trsEuc;		/* time required for enhanced erase */
-	unsigned short	CurAPMvalues;	/* current APM values */
-	unsigned short	mprc;		/* master password revision code */
-	unsigned short	hw_config;	/* hardware config (word 93)
-					 * 15:	Shall be ZERO
-					 * 14:	Shall be ONE
-					 * 13:
-					 * 12:
-					 * 11:
-					 * 10:
-					 *  9:
-					 *  8:
-					 *  7:
-					 *  6:
-					 *  5:
-					 *  4:
-					 *  3:
-					 *  2:
-					 *  1:
-					 *  0:	Shall be ONE
-					 */
-	unsigned short	acoustic;	/* (word 94)
-					 * 15:8	Vendor's recommended value
-					 *  7:0	current value
-					 */
-	unsigned short	msrqs;		/* min stream request size */
-	unsigned short	sxfert;		/* stream transfer time */
-	unsigned short	sal;		/* stream access latency */
-	unsigned int	spg;		/* stream performance granularity */
-	unsigned long long lba_capacity_2;/* 48-bit total number of sectors */
-	unsigned short	words104_125[22];/* reserved words 104-125 */
-	unsigned short	last_lun;	/* (word 126) */
-	unsigned short	word127;	/* (word 127) Feature Set
-					 * Removable Media Notification
-					 * 15:2	reserved
-					 *  1:0	00 = not supported
-					 *	01 = supported
-					 *	10 = reserved
-					 *	11 = reserved
-					 */
-	unsigned short	dlf;		/* (word 128)
-					 * device lock function
-					 * 15:9	reserved
-					 *  8	security level 1:max 0:high
-					 *  7:6	reserved
-					 *  5	enhanced erase
-					 *  4	expire
-					 *  3	frozen
-					 *  2	locked
-					 *  1	en/disabled
-					 *  0	capability
-					 */
-	unsigned short  csfo;		/*  (word 129)
-					 * current set features options
-					 * 15:4	reserved
-					 *  3:	auto reassign
-					 *  2:	reverting
-					 *  1:	read-look-ahead
-					 *  0:	write cache
-					 */
-	unsigned short	words130_155[26];/* reserved vendor words 130-155 */
-	unsigned short	word156;	/* reserved vendor word 156 */
-	unsigned short	words157_159[3];/* reserved vendor words 157-159 */
-	unsigned short	cfa_power;	/* (word 160) CFA Power Mode
-					 * 15 word 160 supported
-					 * 14 reserved
-					 * 13
-					 * 12
-					 * 11:0
-					 */
-	unsigned short	words161_175[15];/* Reserved for CFA */
-	unsigned short	words176_205[30];/* Current Media Serial Number */
-	unsigned short	words206_254[49];/* reserved words 206-254 */
-	unsigned short	integrity_word;	/* (word 255)
-					 * 15:8 Checksum
-					 *  7:0 Signature
-					 */
-};
-#endif /* __KERNEL__ */
-
-/*
- * IDE "nice" flags. These are used on a per drive basis to determine
- * when to be nice and give more bandwidth to the other devices which
- * share the same IDE bus.
- */
-#define IDE_NICE_DSC_OVERLAP	(0)	/* per the DSC overlap protocol */
-#define IDE_NICE_ATAPI_OVERLAP	(1)	/* not supported yet */
-#define IDE_NICE_1		(3)	/* when probably won't affect us much */
-#ifndef __KERNEL__
-#define IDE_NICE_0		(2)	/* when sure that it won't affect us */
-#define IDE_NICE_2		(4)	/* when we know it's on our expense */
-#endif
-
-#endif	/* _LINUX_HDREG_H */
diff --git a/ANDROID_3.4.5/include/linux/hid-debug.h b/ANDROID_3.4.5/include/linux/hid-debug.h
deleted file mode 100644
index 53744fa1..00000000
--- a/ANDROID_3.4.5/include/linux/hid-debug.h
+++ /dev/null
@@ -1,65 +0,0 @@
-#ifndef __HID_DEBUG_H
-#define __HID_DEBUG_H
-
-/*
- *  Copyright (c) 2007-2009	Jiri Kosina
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-
-#define HID_DEBUG_BUFSIZE 512
-
-#ifdef CONFIG_DEBUG_FS
-
-void hid_dump_input(struct hid_device *, struct hid_usage *, __s32);
-void hid_dump_device(struct hid_device *, struct seq_file *);
-void hid_dump_field(struct hid_field *, int, struct seq_file *);
-char *hid_resolv_usage(unsigned, struct seq_file *);
-void hid_debug_register(struct hid_device *, const char *);
-void hid_debug_unregister(struct hid_device *);
-void hid_debug_init(void);
-void hid_debug_exit(void);
-void hid_debug_event(struct hid_device *, char *);
-
-
-struct hid_debug_list {
-	char *hid_debug_buf;
-	int head;
-	int tail;
-	struct fasync_struct *fasync;
-	struct hid_device *hdev;
-	struct list_head node;
-	struct mutex read_mutex;
-};
-
-#else
-
-#define hid_dump_input(a,b,c)		do { } while (0)
-#define hid_dump_device(a,b)		do { } while (0)
-#define hid_dump_field(a,b,c)		do { } while (0)
-#define hid_resolv_usage(a,b)		do { } while (0)
-#define hid_debug_register(a, b)	do { } while (0)
-#define hid_debug_unregister(a)		do { } while (0)
-#define hid_debug_init()		do { } while (0)
-#define hid_debug_exit()		do { } while (0)
-#define hid_debug_event(a,b)		do { } while (0)
-
-#endif
-
-#endif
-
diff --git a/ANDROID_3.4.5/include/linux/hid-roccat.h b/ANDROID_3.4.5/include/linux/hid-roccat.h
deleted file mode 100644
index 24e1ca01..00000000
--- a/ANDROID_3.4.5/include/linux/hid-roccat.h
+++ /dev/null
@@ -1,29 +0,0 @@
-#ifndef __HID_ROCCAT_H
-#define __HID_ROCCAT_H
-
-/*
- * Copyright (c) 2010 Stefan Achatz <erazor_de@users.sourceforge.net>
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the Free
- * Software Foundation; either version 2 of the License, or (at your option)
- * any later version.
- */
-
-#include <linux/hid.h>
-#include <linux/types.h>
-
-#define ROCCATIOCGREPSIZE _IOR('H', 0xf1, int)
-
-#ifdef __KERNEL__
-
-int roccat_connect(struct class *klass, struct hid_device *hid,
-		int report_size);
-void roccat_disconnect(int minor);
-int roccat_report_event(int minor, u8 const *data);
-
-#endif
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/hid.h b/ANDROID_3.4.5/include/linux/hid.h
deleted file mode 100644
index 773b4acf..00000000
--- a/ANDROID_3.4.5/include/linux/hid.h
+++ /dev/null
@@ -1,949 +0,0 @@
-#ifndef __HID_H
-#define __HID_H
-
-/*
- *  Copyright (c) 1999 Andreas Gal
- *  Copyright (c) 2000-2001 Vojtech Pavlik
- *  Copyright (c) 2006-2007 Jiri Kosina
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- * Should you need to contact me, the author, you can do so either by
- * e-mail - mail your message to <vojtech@ucw.cz>, or by paper mail:
- * Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic
- */
-
-/*
- * USB HID (Human Interface Device) interface class code
- */
-
-#define USB_INTERFACE_CLASS_HID		3
-
-/*
- * USB HID interface subclass and protocol codes
- */
-
-#define USB_INTERFACE_SUBCLASS_BOOT	1
-#define USB_INTERFACE_PROTOCOL_KEYBOARD	1
-#define USB_INTERFACE_PROTOCOL_MOUSE	2
-
-/*
- * HID class requests
- */
-
-#define HID_REQ_GET_REPORT		0x01
-#define HID_REQ_GET_IDLE		0x02
-#define HID_REQ_GET_PROTOCOL		0x03
-#define HID_REQ_SET_REPORT		0x09
-#define HID_REQ_SET_IDLE		0x0A
-#define HID_REQ_SET_PROTOCOL		0x0B
-
-/*
- * HID class descriptor types
- */
-
-#define HID_DT_HID			(USB_TYPE_CLASS | 0x01)
-#define HID_DT_REPORT			(USB_TYPE_CLASS | 0x02)
-#define HID_DT_PHYSICAL			(USB_TYPE_CLASS | 0x03)
-
-#define HID_MAX_DESCRIPTOR_SIZE		4096
-
-#ifdef __KERNEL__
-
-#include <linux/types.h>
-#include <linux/slab.h>
-#include <linux/list.h>
-#include <linux/mod_devicetable.h> /* hid_device_id */
-#include <linux/timer.h>
-#include <linux/workqueue.h>
-#include <linux/input.h>
-#include <linux/semaphore.h>
-#include <linux/power_supply.h>
-
-/*
- * We parse each description item into this structure. Short items data
- * values are expanded to 32-bit signed int, long items contain a pointer
- * into the data area.
- */
-
-struct hid_item {
-	unsigned  format;
-	__u8      size;
-	__u8      type;
-	__u8      tag;
-	union {
-	    __u8   u8;
-	    __s8   s8;
-	    __u16  u16;
-	    __s16  s16;
-	    __u32  u32;
-	    __s32  s32;
-	    __u8  *longdata;
-	} data;
-};
-
-/*
- * HID report item format
- */
-
-#define HID_ITEM_FORMAT_SHORT	0
-#define HID_ITEM_FORMAT_LONG	1
-
-/*
- * Special tag indicating long items
- */
-
-#define HID_ITEM_TAG_LONG	15
-
-/*
- * HID report descriptor item type (prefix bit 2,3)
- */
-
-#define HID_ITEM_TYPE_MAIN		0
-#define HID_ITEM_TYPE_GLOBAL		1
-#define HID_ITEM_TYPE_LOCAL		2
-#define HID_ITEM_TYPE_RESERVED		3
-
-/*
- * HID report descriptor main item tags
- */
-
-#define HID_MAIN_ITEM_TAG_INPUT			8
-#define HID_MAIN_ITEM_TAG_OUTPUT		9
-#define HID_MAIN_ITEM_TAG_FEATURE		11
-#define HID_MAIN_ITEM_TAG_BEGIN_COLLECTION	10
-#define HID_MAIN_ITEM_TAG_END_COLLECTION	12
-
-/*
- * HID report descriptor main item contents
- */
-
-#define HID_MAIN_ITEM_CONSTANT		0x001
-#define HID_MAIN_ITEM_VARIABLE		0x002
-#define HID_MAIN_ITEM_RELATIVE		0x004
-#define HID_MAIN_ITEM_WRAP		0x008
-#define HID_MAIN_ITEM_NONLINEAR		0x010
-#define HID_MAIN_ITEM_NO_PREFERRED	0x020
-#define HID_MAIN_ITEM_NULL_STATE	0x040
-#define HID_MAIN_ITEM_VOLATILE		0x080
-#define HID_MAIN_ITEM_BUFFERED_BYTE	0x100
-
-/*
- * HID report descriptor collection item types
- */
-
-#define HID_COLLECTION_PHYSICAL		0
-#define HID_COLLECTION_APPLICATION	1
-#define HID_COLLECTION_LOGICAL		2
-
-/*
- * HID report descriptor global item tags
- */
-
-#define HID_GLOBAL_ITEM_TAG_USAGE_PAGE		0
-#define HID_GLOBAL_ITEM_TAG_LOGICAL_MINIMUM	1
-#define HID_GLOBAL_ITEM_TAG_LOGICAL_MAXIMUM	2
-#define HID_GLOBAL_ITEM_TAG_PHYSICAL_MINIMUM	3
-#define HID_GLOBAL_ITEM_TAG_PHYSICAL_MAXIMUM	4
-#define HID_GLOBAL_ITEM_TAG_UNIT_EXPONENT	5
-#define HID_GLOBAL_ITEM_TAG_UNIT		6
-#define HID_GLOBAL_ITEM_TAG_REPORT_SIZE		7
-#define HID_GLOBAL_ITEM_TAG_REPORT_ID		8
-#define HID_GLOBAL_ITEM_TAG_REPORT_COUNT	9
-#define HID_GLOBAL_ITEM_TAG_PUSH		10
-#define HID_GLOBAL_ITEM_TAG_POP			11
-
-/*
- * HID report descriptor local item tags
- */
-
-#define HID_LOCAL_ITEM_TAG_USAGE		0
-#define HID_LOCAL_ITEM_TAG_USAGE_MINIMUM	1
-#define HID_LOCAL_ITEM_TAG_USAGE_MAXIMUM	2
-#define HID_LOCAL_ITEM_TAG_DESIGNATOR_INDEX	3
-#define HID_LOCAL_ITEM_TAG_DESIGNATOR_MINIMUM	4
-#define HID_LOCAL_ITEM_TAG_DESIGNATOR_MAXIMUM	5
-#define HID_LOCAL_ITEM_TAG_STRING_INDEX		7
-#define HID_LOCAL_ITEM_TAG_STRING_MINIMUM	8
-#define HID_LOCAL_ITEM_TAG_STRING_MAXIMUM	9
-#define HID_LOCAL_ITEM_TAG_DELIMITER		10
-
-/*
- * HID usage tables
- */
-
-#define HID_USAGE_PAGE		0xffff0000
-
-#define HID_UP_UNDEFINED	0x00000000
-#define HID_UP_GENDESK		0x00010000
-#define HID_UP_SIMULATION	0x00020000
-#define HID_UP_GENDEVCTRLS	0x00060000
-#define HID_UP_KEYBOARD		0x00070000
-#define HID_UP_LED		0x00080000
-#define HID_UP_BUTTON		0x00090000
-#define HID_UP_ORDINAL		0x000a0000
-#define HID_UP_CONSUMER		0x000c0000
-#define HID_UP_DIGITIZER	0x000d0000
-#define HID_UP_PID		0x000f0000
-#define HID_UP_HPVENDOR         0xff7f0000
-#define HID_UP_MSVENDOR		0xff000000
-#define HID_UP_CUSTOM		0x00ff0000
-#define HID_UP_LOGIVENDOR	0xffbc0000
-
-#define HID_USAGE		0x0000ffff
-
-#define HID_GD_POINTER		0x00010001
-#define HID_GD_MOUSE		0x00010002
-#define HID_GD_JOYSTICK		0x00010004
-#define HID_GD_GAMEPAD		0x00010005
-#define HID_GD_KEYBOARD		0x00010006
-#define HID_GD_KEYPAD		0x00010007
-#define HID_GD_MULTIAXIS	0x00010008
-#define HID_GD_X		0x00010030
-#define HID_GD_Y		0x00010031
-#define HID_GD_Z		0x00010032
-#define HID_GD_RX		0x00010033
-#define HID_GD_RY		0x00010034
-#define HID_GD_RZ		0x00010035
-#define HID_GD_SLIDER		0x00010036
-#define HID_GD_DIAL		0x00010037
-#define HID_GD_WHEEL		0x00010038
-#define HID_GD_HATSWITCH	0x00010039
-#define HID_GD_BUFFER		0x0001003a
-#define HID_GD_BYTECOUNT	0x0001003b
-#define HID_GD_MOTION		0x0001003c
-#define HID_GD_START		0x0001003d
-#define HID_GD_SELECT		0x0001003e
-#define HID_GD_VX		0x00010040
-#define HID_GD_VY		0x00010041
-#define HID_GD_VZ		0x00010042
-#define HID_GD_VBRX		0x00010043
-#define HID_GD_VBRY		0x00010044
-#define HID_GD_VBRZ		0x00010045
-#define HID_GD_VNO		0x00010046
-#define HID_GD_FEATURE		0x00010047
-#define HID_GD_UP		0x00010090
-#define HID_GD_DOWN		0x00010091
-#define HID_GD_RIGHT		0x00010092
-#define HID_GD_LEFT		0x00010093
-
-#define HID_DC_BATTERYSTRENGTH	0x00060020
-
-#define HID_DG_DIGITIZER	0x000d0001
-#define HID_DG_PEN		0x000d0002
-#define HID_DG_LIGHTPEN		0x000d0003
-#define HID_DG_TOUCHSCREEN	0x000d0004
-#define HID_DG_TOUCHPAD		0x000d0005
-#define HID_DG_STYLUS		0x000d0020
-#define HID_DG_PUCK		0x000d0021
-#define HID_DG_FINGER		0x000d0022
-#define HID_DG_TIPPRESSURE	0x000d0030
-#define HID_DG_BARRELPRESSURE	0x000d0031
-#define HID_DG_INRANGE		0x000d0032
-#define HID_DG_TOUCH		0x000d0033
-#define HID_DG_UNTOUCH		0x000d0034
-#define HID_DG_TAP		0x000d0035
-#define HID_DG_TABLETFUNCTIONKEY	0x000d0039
-#define HID_DG_PROGRAMCHANGEKEY	0x000d003a
-#define HID_DG_INVERT		0x000d003c
-#define HID_DG_TIPSWITCH	0x000d0042
-#define HID_DG_TIPSWITCH2	0x000d0043
-#define HID_DG_BARRELSWITCH	0x000d0044
-#define HID_DG_ERASER		0x000d0045
-#define HID_DG_TABLETPICK	0x000d0046
-/*
- * as of May 20, 2009 the usages below are not yet in the official USB spec
- * but are being pushed by Microsft as described in their paper "Digitizer
- * Drivers for Windows Touch and Pen-Based Computers"
- */
-#define HID_DG_CONFIDENCE	0x000d0047
-#define HID_DG_WIDTH		0x000d0048
-#define HID_DG_HEIGHT		0x000d0049
-#define HID_DG_CONTACTID	0x000d0051
-#define HID_DG_INPUTMODE	0x000d0052
-#define HID_DG_DEVICEINDEX	0x000d0053
-#define HID_DG_CONTACTCOUNT	0x000d0054
-#define HID_DG_CONTACTMAX	0x000d0055
-
-/*
- * HID report types --- Ouch! HID spec says 1 2 3!
- */
-
-#define HID_INPUT_REPORT	0
-#define HID_OUTPUT_REPORT	1
-#define HID_FEATURE_REPORT	2
-
-/*
- * HID connect requests
- */
-
-#define HID_CONNECT_HIDINPUT		0x01
-#define HID_CONNECT_HIDINPUT_FORCE	0x02
-#define HID_CONNECT_HIDRAW		0x04
-#define HID_CONNECT_HIDDEV		0x08
-#define HID_CONNECT_HIDDEV_FORCE	0x10
-#define HID_CONNECT_FF			0x20
-#define HID_CONNECT_DEFAULT	(HID_CONNECT_HIDINPUT|HID_CONNECT_HIDRAW| \
-		HID_CONNECT_HIDDEV|HID_CONNECT_FF)
-
-/*
- * HID device quirks.
- */
-
-/* 
- * Increase this if you need to configure more HID quirks at module load time
- */
-#define MAX_USBHID_BOOT_QUIRKS 4
-
-#define HID_QUIRK_INVERT			0x00000001
-#define HID_QUIRK_NOTOUCH			0x00000002
-#define HID_QUIRK_IGNORE			0x00000004
-#define HID_QUIRK_NOGET				0x00000008
-#define HID_QUIRK_HIDDEV_FORCE			0x00000010
-#define HID_QUIRK_BADPAD			0x00000020
-#define HID_QUIRK_MULTI_INPUT			0x00000040
-#define HID_QUIRK_HIDINPUT_FORCE		0x00000080
-#define HID_QUIRK_MULTITOUCH			0x00000100
-#define HID_QUIRK_SKIP_OUTPUT_REPORTS		0x00010000
-#define HID_QUIRK_FULLSPEED_INTERVAL		0x10000000
-#define HID_QUIRK_NO_INIT_REPORTS		0x20000000
-#define HID_QUIRK_NO_IGNORE			0x40000000
-#define HID_QUIRK_NO_INPUT_SYNC			0x80000000
-
-/*
- * This is the global environment of the parser. This information is
- * persistent for main-items. The global environment can be saved and
- * restored with PUSH/POP statements.
- */
-
-struct hid_global {
-	unsigned usage_page;
-	__s32    logical_minimum;
-	__s32    logical_maximum;
-	__s32    physical_minimum;
-	__s32    physical_maximum;
-	__s32    unit_exponent;
-	unsigned unit;
-	unsigned report_id;
-	unsigned report_size;
-	unsigned report_count;
-};
-
-/*
- * This is the local environment. It is persistent up the next main-item.
- */
-
-#define HID_MAX_USAGES			12288
-#define HID_DEFAULT_NUM_COLLECTIONS	16
-
-struct hid_local {
-	unsigned usage[HID_MAX_USAGES]; /* usage array */
-	unsigned collection_index[HID_MAX_USAGES]; /* collection index array */
-	unsigned usage_index;
-	unsigned usage_minimum;
-	unsigned delimiter_depth;
-	unsigned delimiter_branch;
-};
-
-/*
- * This is the collection stack. We climb up the stack to determine
- * application and function of each field.
- */
-
-struct hid_collection {
-	unsigned type;
-	unsigned usage;
-	unsigned level;
-};
-
-struct hid_usage {
-	unsigned  hid;			/* hid usage code */
-	unsigned  collection_index;	/* index into collection array */
-	/* hidinput data */
-	__u16     code;			/* input driver code */
-	__u8      type;			/* input driver type */
-	__s8	  hat_min;		/* hat switch fun */
-	__s8	  hat_max;		/* ditto */
-	__s8	  hat_dir;		/* ditto */
-};
-
-struct hid_input;
-
-struct hid_field {
-	unsigned  physical;		/* physical usage for this field */
-	unsigned  logical;		/* logical usage for this field */
-	unsigned  application;		/* application usage for this field */
-	struct hid_usage *usage;	/* usage table for this function */
-	unsigned  maxusage;		/* maximum usage index */
-	unsigned  flags;		/* main-item flags (i.e. volatile,array,constant) */
-	unsigned  report_offset;	/* bit offset in the report */
-	unsigned  report_size;		/* size of this field in the report */
-	unsigned  report_count;		/* number of this field in the report */
-	unsigned  report_type;		/* (input,output,feature) */
-	__s32    *value;		/* last known value(s) */
-	__s32     logical_minimum;
-	__s32     logical_maximum;
-	__s32     physical_minimum;
-	__s32     physical_maximum;
-	__s32     unit_exponent;
-	unsigned  unit;
-	struct hid_report *report;	/* associated report */
-	unsigned index;			/* index into report->field[] */
-	/* hidinput data */
-	struct hid_input *hidinput;	/* associated input structure */
-	__u16 dpad;			/* dpad input code */
-};
-
-#define HID_MAX_FIELDS 128
-
-struct hid_report {
-	struct list_head list;
-	unsigned id;					/* id of this report */
-	unsigned type;					/* report type */
-	struct hid_field *field[HID_MAX_FIELDS];	/* fields of the report */
-	unsigned maxfield;				/* maximum valid field index */
-	unsigned size;					/* size of the report (bits) */
-	struct hid_device *device;			/* associated device */
-};
-
-struct hid_report_enum {
-	unsigned numbered;
-	struct list_head report_list;
-	struct hid_report *report_id_hash[256];
-};
-
-#define HID_REPORT_TYPES 3
-
-#define HID_MIN_BUFFER_SIZE	64		/* make sure there is at least a packet size of space */
-#define HID_MAX_BUFFER_SIZE	4096		/* 4kb */
-#define HID_CONTROL_FIFO_SIZE	256		/* to init devices with >100 reports */
-#define HID_OUTPUT_FIFO_SIZE	64
-
-struct hid_control_fifo {
-	unsigned char dir;
-	struct hid_report *report;
-	char *raw_report;
-};
-
-struct hid_output_fifo {
-	struct hid_report *report;
-	char *raw_report;
-};
-
-#define HID_CLAIMED_INPUT	1
-#define HID_CLAIMED_HIDDEV	2
-#define HID_CLAIMED_HIDRAW	4
-
-#define HID_STAT_ADDED		1
-#define HID_STAT_PARSED		2
-
-struct hid_input {
-	struct list_head list;
-	struct hid_report *report;
-	struct input_dev *input;
-};
-
-enum hid_type {
-	HID_TYPE_OTHER = 0,
-	HID_TYPE_USBMOUSE,
-	HID_TYPE_USBNONE
-};
-
-struct hid_driver;
-struct hid_ll_driver;
-
-struct hid_device {							/* device report descriptor */
-	__u8 *rdesc;
-	unsigned rsize;
-	struct hid_collection *collection;				/* List of HID collections */
-	unsigned collection_size;					/* Number of allocated hid_collections */
-	unsigned maxcollection;						/* Number of parsed collections */
-	unsigned maxapplication;					/* Number of applications */
-	__u16 bus;							/* BUS ID */
-	__u32 vendor;							/* Vendor ID */
-	__u32 product;							/* Product ID */
-	__u32 version;							/* HID version */
-	enum hid_type type;						/* device type (mouse, kbd, ...) */
-	unsigned country;						/* HID country */
-	struct hid_report_enum report_enum[HID_REPORT_TYPES];
-
-	struct semaphore driver_lock;					/* protects the current driver */
-	struct device dev;						/* device */
-	struct hid_driver *driver;
-	struct hid_ll_driver *ll_driver;
-
-#ifdef CONFIG_HID_BATTERY_STRENGTH
-	/*
-	 * Power supply information for HID devices which report
-	 * battery strength. power_supply is registered iff
-	 * battery.name is non-NULL.
-	 */
-	struct power_supply battery;
-	__s32 battery_min;
-	__s32 battery_max;
-	__s32 battery_report_type;
-	__s32 battery_report_id;
-#endif
-
-	unsigned int status;						/* see STAT flags above */
-	unsigned claimed;						/* Claimed by hidinput, hiddev? */
-	unsigned quirks;						/* Various quirks the device can pull on us */
-
-	struct list_head inputs;					/* The list of inputs */
-	void *hiddev;							/* The hiddev structure */
-	void *hidraw;
-	int minor;							/* Hiddev minor number */
-
-	int open;							/* is the device open by anyone? */
-	char name[128];							/* Device name */
-	char phys[64];							/* Device physical location */
-	char uniq[64];							/* Device unique identifier (serial #) */
-
-	void *driver_data;
-
-	/* temporary hid_ff handling (until moved to the drivers) */
-	int (*ff_init)(struct hid_device *);
-
-	/* hiddev event handler */
-	int (*hiddev_connect)(struct hid_device *, unsigned int);
-	void (*hiddev_disconnect)(struct hid_device *);
-	void (*hiddev_hid_event) (struct hid_device *, struct hid_field *field,
-				  struct hid_usage *, __s32);
-	void (*hiddev_report_event) (struct hid_device *, struct hid_report *);
-
-	/* handler for raw input (Get_Report) data, used by hidraw */
-	int (*hid_get_raw_report) (struct hid_device *, unsigned char, __u8 *, size_t, unsigned char);
-
-	/* handler for raw output data, used by hidraw */
-	int (*hid_output_raw_report) (struct hid_device *, __u8 *, size_t, unsigned char);
-
-	/* debugging support via debugfs */
-	unsigned short debug;
-	struct dentry *debug_dir;
-	struct dentry *debug_rdesc;
-	struct dentry *debug_events;
-	struct list_head debug_list;
-	wait_queue_head_t debug_wait;
-};
-
-static inline void *hid_get_drvdata(struct hid_device *hdev)
-{
-	return dev_get_drvdata(&hdev->dev);
-}
-
-static inline void hid_set_drvdata(struct hid_device *hdev, void *data)
-{
-	dev_set_drvdata(&hdev->dev, data);
-}
-
-#define HID_GLOBAL_STACK_SIZE 4
-#define HID_COLLECTION_STACK_SIZE 4
-
-struct hid_parser {
-	struct hid_global     global;
-	struct hid_global     global_stack[HID_GLOBAL_STACK_SIZE];
-	unsigned              global_stack_ptr;
-	struct hid_local      local;
-	unsigned              collection_stack[HID_COLLECTION_STACK_SIZE];
-	unsigned              collection_stack_ptr;
-	struct hid_device    *device;
-};
-
-struct hid_class_descriptor {
-	__u8  bDescriptorType;
-	__le16 wDescriptorLength;
-} __attribute__ ((packed));
-
-struct hid_descriptor {
-	__u8  bLength;
-	__u8  bDescriptorType;
-	__le16 bcdHID;
-	__u8  bCountryCode;
-	__u8  bNumDescriptors;
-
-	struct hid_class_descriptor desc[1];
-} __attribute__ ((packed));
-
-#define HID_DEVICE(b, ven, prod) \
-	.bus = (b), \
-	.vendor = (ven), .product = (prod)
-
-#define HID_USB_DEVICE(ven, prod)	HID_DEVICE(BUS_USB, ven, prod)
-#define HID_BLUETOOTH_DEVICE(ven, prod)	HID_DEVICE(BUS_BLUETOOTH, ven, prod)
-
-#define HID_REPORT_ID(rep) \
-	.report_type = (rep)
-#define HID_USAGE_ID(uhid, utype, ucode) \
-	.usage_hid = (uhid), .usage_type = (utype), .usage_code = (ucode)
-/* we don't want to catch types and codes equal to 0 */
-#define HID_TERMINATOR		(HID_ANY_ID - 1)
-
-struct hid_report_id {
-	__u32 report_type;
-};
-struct hid_usage_id {
-	__u32 usage_hid;
-	__u32 usage_type;
-	__u32 usage_code;
-};
-
-/**
- * struct hid_driver
- * @name: driver name (e.g. "Footech_bar-wheel")
- * @id_table: which devices is this driver for (must be non-NULL for probe
- * 	      to be called)
- * @dyn_list: list of dynamically added device ids
- * @dyn_lock: lock protecting @dyn_list
- * @probe: new device inserted
- * @remove: device removed (NULL if not a hot-plug capable driver)
- * @report_table: on which reports to call raw_event (NULL means all)
- * @raw_event: if report in report_table, this hook is called (NULL means nop)
- * @usage_table: on which events to call event (NULL means all)
- * @event: if usage in usage_table, this hook is called (NULL means nop)
- * @report_fixup: called before report descriptor parsing (NULL means nop)
- * @input_mapping: invoked on input registering before mapping an usage
- * @input_mapped: invoked on input registering after mapping an usage
- * @feature_mapping: invoked on feature registering
- * @input_register: called just before input device is registered after reports
- * 		    are parsed.
- * @suspend: invoked on suspend (NULL means nop)
- * @resume: invoked on resume if device was not reset (NULL means nop)
- * @reset_resume: invoked on resume if device was reset (NULL means nop)
- *
- * raw_event and event should return 0 on no action performed, 1 when no
- * further processing should be done and negative on error
- *
- * input_mapping shall return a negative value to completely ignore this usage
- * (e.g. doubled or invalid usage), zero to continue with parsing of this
- * usage by generic code (no special handling needed) or positive to skip
- * generic parsing (needed special handling which was done in the hook already)
- * input_mapped shall return negative to inform the layer that this usage
- * should not be considered for further processing or zero to notify that
- * no processing was performed and should be done in a generic manner
- * Both these functions may be NULL which means the same behavior as returning
- * zero from them.
- */
-struct hid_driver {
-	char *name;
-	const struct hid_device_id *id_table;
-
-	struct list_head dyn_list;
-	spinlock_t dyn_lock;
-
-	int (*probe)(struct hid_device *dev, const struct hid_device_id *id);
-	void (*remove)(struct hid_device *dev);
-
-	const struct hid_report_id *report_table;
-	int (*raw_event)(struct hid_device *hdev, struct hid_report *report,
-			u8 *data, int size);
-	const struct hid_usage_id *usage_table;
-	int (*event)(struct hid_device *hdev, struct hid_field *field,
-			struct hid_usage *usage, __s32 value);
-
-	__u8 *(*report_fixup)(struct hid_device *hdev, __u8 *buf,
-			unsigned int *size);
-
-	int (*input_mapping)(struct hid_device *hdev,
-			struct hid_input *hidinput, struct hid_field *field,
-			struct hid_usage *usage, unsigned long **bit, int *max);
-	int (*input_mapped)(struct hid_device *hdev,
-			struct hid_input *hidinput, struct hid_field *field,
-			struct hid_usage *usage, unsigned long **bit, int *max);
-	void (*feature_mapping)(struct hid_device *hdev,
-			struct hid_field *field,
-			struct hid_usage *usage);
-	int (*input_register)(struct hid_device *hdev, struct hid_input
-			*hidinput);
-#ifdef CONFIG_PM
-	int (*suspend)(struct hid_device *hdev, pm_message_t message);
-	int (*resume)(struct hid_device *hdev);
-	int (*reset_resume)(struct hid_device *hdev);
-#endif
-/* private: */
-	struct device_driver driver;
-};
-
-/**
- * hid_ll_driver - low level driver callbacks
- * @start: called on probe to start the device
- * @stop: called on remove
- * @open: called by input layer on open
- * @close: called by input layer on close
- * @hidinput_input_event: event input event (e.g. ff or leds)
- * @parse: this method is called only once to parse the device data,
- *	   shouldn't allocate anything to not leak memory
- */
-struct hid_ll_driver {
-	int (*start)(struct hid_device *hdev);
-	void (*stop)(struct hid_device *hdev);
-
-	int (*open)(struct hid_device *hdev);
-	void (*close)(struct hid_device *hdev);
-
-	int (*power)(struct hid_device *hdev, int level);
-
-	int (*hidinput_input_event) (struct input_dev *idev, unsigned int type,
-			unsigned int code, int value);
-
-	int (*parse)(struct hid_device *hdev);
-};
-
-#define	PM_HINT_FULLON	1<<5
-#define PM_HINT_NORMAL	1<<1
-
-/* Applications from HID Usage Tables 4/8/99 Version 1.1 */
-/* We ignore a few input applications that are not widely used */
-#define IS_INPUT_APPLICATION(a) (((a >= 0x00010000) && (a <= 0x00010008)) || (a == 0x00010080) || (a == 0x000c0001) || ((a >= 0x000d0002) && (a <= 0x000d0006)))
-
-/* HID core API */
-
-extern int hid_debug;
-
-extern int hid_add_device(struct hid_device *);
-extern void hid_destroy_device(struct hid_device *);
-
-extern int __must_check __hid_register_driver(struct hid_driver *,
-		struct module *, const char *mod_name);
-
-/* use a define to avoid include chaining to get THIS_MODULE & friends */
-#define hid_register_driver(driver) \
-	__hid_register_driver(driver, THIS_MODULE, KBUILD_MODNAME)
-
-extern void hid_unregister_driver(struct hid_driver *);
-
-extern void hidinput_hid_event(struct hid_device *, struct hid_field *, struct hid_usage *, __s32);
-extern void hidinput_report_event(struct hid_device *hid, struct hid_report *report);
-extern int hidinput_connect(struct hid_device *hid, unsigned int force);
-extern void hidinput_disconnect(struct hid_device *);
-
-int hid_set_field(struct hid_field *, unsigned, __s32);
-int hid_input_report(struct hid_device *, int type, u8 *, int, int);
-int hidinput_find_field(struct hid_device *hid, unsigned int type, unsigned int code, struct hid_field **field);
-struct hid_field *hidinput_get_led_field(struct hid_device *hid);
-unsigned int hidinput_count_leds(struct hid_device *hid);
-void hid_output_report(struct hid_report *report, __u8 *data);
-struct hid_device *hid_allocate_device(void);
-struct hid_report *hid_register_report(struct hid_device *device, unsigned type, unsigned id);
-int hid_parse_report(struct hid_device *hid, __u8 *start, unsigned size);
-int hid_check_keys_pressed(struct hid_device *hid);
-int hid_connect(struct hid_device *hid, unsigned int connect_mask);
-void hid_disconnect(struct hid_device *hid);
-const struct hid_device_id *hid_match_id(struct hid_device *hdev,
-					 const struct hid_device_id *id);
-
-/**
- * hid_map_usage - map usage input bits
- *
- * @hidinput: hidinput which we are interested in
- * @usage: usage to fill in
- * @bit: pointer to input->{}bit (out parameter)
- * @max: maximal valid usage->code to consider later (out parameter)
- * @type: input event type (EV_KEY, EV_REL, ...)
- * @c: code which corresponds to this usage and type
- */
-static inline void hid_map_usage(struct hid_input *hidinput,
-		struct hid_usage *usage, unsigned long **bit, int *max,
-		__u8 type, __u16 c)
-{
-	struct input_dev *input = hidinput->input;
-
-	usage->type = type;
-	usage->code = c;
-
-	switch (type) {
-	case EV_ABS:
-		*bit = input->absbit;
-		*max = ABS_MAX;
-		break;
-	case EV_REL:
-		*bit = input->relbit;
-		*max = REL_MAX;
-		break;
-	case EV_KEY:
-		*bit = input->keybit;
-		*max = KEY_MAX;
-		break;
-	case EV_LED:
-		*bit = input->ledbit;
-		*max = LED_MAX;
-		break;
-	}
-}
-
-/**
- * hid_map_usage_clear - map usage input bits and clear the input bit
- *
- * The same as hid_map_usage, except the @c bit is also cleared in supported
- * bits (@bit).
- */
-static inline void hid_map_usage_clear(struct hid_input *hidinput,
-		struct hid_usage *usage, unsigned long **bit, int *max,
-		__u8 type, __u16 c)
-{
-	hid_map_usage(hidinput, usage, bit, max, type, c);
-	clear_bit(c, *bit);
-}
-
-/**
- * hid_parse - parse HW reports
- *
- * @hdev: hid device
- *
- * Call this from probe after you set up the device (if needed). Your
- * report_fixup will be called (if non-NULL) after reading raw report from
- * device before passing it to hid layer for real parsing.
- */
-static inline int __must_check hid_parse(struct hid_device *hdev)
-{
-	int ret;
-
-	if (hdev->status & HID_STAT_PARSED)
-		return 0;
-
-	ret = hdev->ll_driver->parse(hdev);
-	if (!ret)
-		hdev->status |= HID_STAT_PARSED;
-
-	return ret;
-}
-
-/**
- * hid_hw_start - start underlaying HW
- *
- * @hdev: hid device
- * @connect_mask: which outputs to connect, see HID_CONNECT_*
- *
- * Call this in probe function *after* hid_parse. This will setup HW buffers
- * and start the device (if not deffered to device open). hid_hw_stop must be
- * called if this was successful.
- */
-static inline int __must_check hid_hw_start(struct hid_device *hdev,
-		unsigned int connect_mask)
-{
-	int ret = hdev->ll_driver->start(hdev);
-	if (ret || !connect_mask)
-		return ret;
-	ret = hid_connect(hdev, connect_mask);
-	if (ret)
-		hdev->ll_driver->stop(hdev);
-	return ret;
-}
-
-/**
- * hid_hw_stop - stop underlaying HW
- *
- * @hdev: hid device
- *
- * This is usually called from remove function or from probe when something
- * failed and hid_hw_start was called already.
- */
-static inline void hid_hw_stop(struct hid_device *hdev)
-{
-	hid_disconnect(hdev);
-	hdev->ll_driver->stop(hdev);
-}
-
-/**
- * hid_hw_open - signal underlaying HW to start delivering events
- *
- * @hdev: hid device
- *
- * Tell underlying HW to start delivering events from the device.
- * This function should be called sometime after successful call
- * to hid_hiw_start().
- */
-static inline int __must_check hid_hw_open(struct hid_device *hdev)
-{
-	return hdev->ll_driver->open(hdev);
-}
-
-/**
- * hid_hw_close - signal underlaying HW to stop delivering events
- *
- * @hdev: hid device
- *
- * This function indicates that we are not interested in the events
- * from this device anymore. Delivery of events may or may not stop,
- * depending on the number of users still outstanding.
- */
-static inline void hid_hw_close(struct hid_device *hdev)
-{
-	hdev->ll_driver->close(hdev);
-}
-
-/**
- * hid_hw_power - requests underlying HW to go into given power mode
- *
- * @hdev: hid device
- * @level: requested power level (one of %PM_HINT_* defines)
- *
- * This function requests underlying hardware to enter requested power
- * mode.
- */
-
-static inline int hid_hw_power(struct hid_device *hdev, int level)
-{
-	return hdev->ll_driver->power ? hdev->ll_driver->power(hdev, level) : 0;
-}
-
-void hid_report_raw_event(struct hid_device *hid, int type, u8 *data, int size,
-		int interrupt);
-
-extern int hid_generic_init(void);
-extern void hid_generic_exit(void);
-
-/* HID quirks API */
-u32 usbhid_lookup_quirk(const u16 idVendor, const u16 idProduct);
-int usbhid_quirks_init(char **quirks_param);
-void usbhid_quirks_exit(void);
-void usbhid_set_leds(struct hid_device *hid);
-
-#ifdef CONFIG_HID_PID
-int hid_pidff_init(struct hid_device *hid);
-#else
-#define hid_pidff_init NULL
-#endif
-
-#define dbg_hid(format, arg...)						\
-do {									\
-	if (hid_debug)							\
-		printk(KERN_DEBUG "%s: " format, __FILE__, ##arg);	\
-} while (0)
-
-#define hid_printk(level, hid, fmt, arg...)		\
-	dev_printk(level, &(hid)->dev, fmt, ##arg)
-#define hid_emerg(hid, fmt, arg...)			\
-	dev_emerg(&(hid)->dev, fmt, ##arg)
-#define hid_crit(hid, fmt, arg...)			\
-	dev_crit(&(hid)->dev, fmt, ##arg)
-#define hid_alert(hid, fmt, arg...)			\
-	dev_alert(&(hid)->dev, fmt, ##arg)
-#define hid_err(hid, fmt, arg...)			\
-	dev_err(&(hid)->dev, fmt, ##arg)
-#define hid_notice(hid, fmt, arg...)			\
-	dev_notice(&(hid)->dev, fmt, ##arg)
-#define hid_warn(hid, fmt, arg...)			\
-	dev_warn(&(hid)->dev, fmt, ##arg)
-#define hid_info(hid, fmt, arg...)			\
-	dev_info(&(hid)->dev, fmt, ##arg)
-#define hid_dbg(hid, fmt, arg...)			\
-	dev_dbg(&(hid)->dev, fmt, ##arg)
-
-#endif /* __KERNEL__ */
-
-#endif
-
diff --git a/ANDROID_3.4.5/include/linux/hiddev.h b/ANDROID_3.4.5/include/linux/hiddev.h
deleted file mode 100644
index a3f481a3..00000000
--- a/ANDROID_3.4.5/include/linux/hiddev.h
+++ /dev/null
@@ -1,240 +0,0 @@
-#ifndef _HIDDEV_H
-#define _HIDDEV_H
-
-/*
- *  Copyright (c) 1999-2000 Vojtech Pavlik
- *
- *  Sponsored by SuSE
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or 
- * (at your option) any later version.
- * 
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- * 
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- * 
- * Should you need to contact me, the author, you can do so either by
- * e-mail - mail your message to <vojtech@suse.cz>, or by paper mail:
- * Vojtech Pavlik, Ucitelska 1576, Prague 8, 182 00 Czech Republic
- */
-
-#include <linux/types.h>
-
-/*
- * The event structure itself
- */
-
-struct hiddev_event {
-	unsigned hid;
-	signed int value;
-};
-
-struct hiddev_devinfo {
-	__u32 bustype;
-	__u32 busnum;
-	__u32 devnum;
-	__u32 ifnum;
-	__s16 vendor;
-	__s16 product;
-	__s16 version;
-	__u32 num_applications;
-};
-
-struct hiddev_collection_info {
-	__u32 index;
-	__u32 type;
-	__u32 usage;
-	__u32 level;
-};
-
-#define HID_STRING_SIZE 256
-struct hiddev_string_descriptor {
-	__s32 index;
-	char value[HID_STRING_SIZE];
-};
-
-struct hiddev_report_info {
-	__u32 report_type;
-	__u32 report_id;
-	__u32 num_fields;
-};
-
-/* To do a GUSAGE/SUSAGE, fill in at least usage_code,  report_type and 
- * report_id.  Set report_id to REPORT_ID_UNKNOWN if the rest of the fields 
- * are unknown.  Otherwise use a usage_ref struct filled in from a previous 
- * successful GUSAGE call to save time.  To actually send a value to the
- * device, perform a SUSAGE first, followed by a SREPORT.  An INITREPORT or a
- * GREPORT isn't necessary for a GUSAGE to return valid data.
- */
-#define HID_REPORT_ID_UNKNOWN 0xffffffff
-#define HID_REPORT_ID_FIRST   0x00000100
-#define HID_REPORT_ID_NEXT    0x00000200
-#define HID_REPORT_ID_MASK    0x000000ff
-#define HID_REPORT_ID_MAX     0x000000ff
-
-#define HID_REPORT_TYPE_INPUT	1
-#define HID_REPORT_TYPE_OUTPUT	2
-#define HID_REPORT_TYPE_FEATURE	3
-#define HID_REPORT_TYPE_MIN     1
-#define HID_REPORT_TYPE_MAX     3
-
-struct hiddev_field_info {
-	__u32 report_type;
-	__u32 report_id;
-	__u32 field_index;
-	__u32 maxusage;
-	__u32 flags;
-	__u32 physical;		/* physical usage for this field */
-	__u32 logical;		/* logical usage for this field */
-	__u32 application;		/* application usage for this field */
-	__s32 logical_minimum;
-	__s32 logical_maximum;
-	__s32 physical_minimum;
-	__s32 physical_maximum;
-	__u32 unit_exponent;
-	__u32 unit;
-};
-
-/* Fill in report_type, report_id and field_index to get the information on a
- * field.
- */
-#define HID_FIELD_CONSTANT		0x001
-#define HID_FIELD_VARIABLE		0x002
-#define HID_FIELD_RELATIVE		0x004
-#define HID_FIELD_WRAP			0x008	
-#define HID_FIELD_NONLINEAR		0x010
-#define HID_FIELD_NO_PREFERRED		0x020
-#define HID_FIELD_NULL_STATE		0x040
-#define HID_FIELD_VOLATILE		0x080
-#define HID_FIELD_BUFFERED_BYTE		0x100
-
-struct hiddev_usage_ref {
-	__u32 report_type;
-	__u32 report_id;
-	__u32 field_index;
-	__u32 usage_index;
-	__u32 usage_code;
-	__s32 value;
-};
-
-/* hiddev_usage_ref_multi is used for sending multiple bytes to a control.
- * It really manifests itself as setting the value of consecutive usages */
-#define HID_MAX_MULTI_USAGES 1024
-struct hiddev_usage_ref_multi {
-	struct hiddev_usage_ref uref;
-	__u32 num_values;
-	__s32 values[HID_MAX_MULTI_USAGES];
-};
-
-/* FIELD_INDEX_NONE is returned in read() data from the kernel when flags
- * is set to (HIDDEV_FLAG_UREF | HIDDEV_FLAG_REPORT) and a new report has
- * been sent by the device 
- */
-#define HID_FIELD_INDEX_NONE 0xffffffff
-
-/*
- * Protocol version.
- */
-
-#define HID_VERSION		0x010004
-
-/*
- * IOCTLs (0x00 - 0x7f)
- */
-
-#define HIDIOCGVERSION		_IOR('H', 0x01, int)
-#define HIDIOCAPPLICATION	_IO('H', 0x02)
-#define HIDIOCGDEVINFO		_IOR('H', 0x03, struct hiddev_devinfo)
-#define HIDIOCGSTRING		_IOR('H', 0x04, struct hiddev_string_descriptor)
-#define HIDIOCINITREPORT	_IO('H', 0x05)
-#define HIDIOCGNAME(len)	_IOC(_IOC_READ, 'H', 0x06, len)
-#define HIDIOCGREPORT		_IOW('H', 0x07, struct hiddev_report_info)
-#define HIDIOCSREPORT		_IOW('H', 0x08, struct hiddev_report_info)
-#define HIDIOCGREPORTINFO	_IOWR('H', 0x09, struct hiddev_report_info)
-#define HIDIOCGFIELDINFO	_IOWR('H', 0x0A, struct hiddev_field_info)
-#define HIDIOCGUSAGE		_IOWR('H', 0x0B, struct hiddev_usage_ref)
-#define HIDIOCSUSAGE		_IOW('H', 0x0C, struct hiddev_usage_ref)
-#define HIDIOCGUCODE		_IOWR('H', 0x0D, struct hiddev_usage_ref)
-#define HIDIOCGFLAG		_IOR('H', 0x0E, int)
-#define HIDIOCSFLAG		_IOW('H', 0x0F, int)
-#define HIDIOCGCOLLECTIONINDEX	_IOW('H', 0x10, struct hiddev_usage_ref)
-#define HIDIOCGCOLLECTIONINFO	_IOWR('H', 0x11, struct hiddev_collection_info)
-#define HIDIOCGPHYS(len)	_IOC(_IOC_READ, 'H', 0x12, len)
-
-/* For writing/reading to multiple/consecutive usages */
-#define HIDIOCGUSAGES		_IOWR('H', 0x13, struct hiddev_usage_ref_multi)
-#define HIDIOCSUSAGES		_IOW('H', 0x14, struct hiddev_usage_ref_multi)
-
-/* 
- * Flags to be used in HIDIOCSFLAG
- */
-#define HIDDEV_FLAG_UREF	0x1
-#define HIDDEV_FLAG_REPORT	0x2
-#define HIDDEV_FLAGS		0x3
-
-/* To traverse the input report descriptor info for a HID device, perform the 
- * following:
- *
- * rinfo.report_type = HID_REPORT_TYPE_INPUT;
- * rinfo.report_id = HID_REPORT_ID_FIRST;
- * ret = ioctl(fd, HIDIOCGREPORTINFO, &rinfo);
- *
- * while (ret >= 0) {
- * 	for (i = 0; i < rinfo.num_fields; i++) {
- * 		finfo.report_type = rinfo.report_type;
- * 		finfo.report_id = rinfo.report_id;
- * 		finfo.field_index = i;
- * 		ioctl(fd, HIDIOCGFIELDINFO, &finfo);
- * 		for (j = 0; j < finfo.maxusage; j++) {
- * 			uref.report_type = rinfo.report_type;
- * 			uref.report_id = rinfo.report_id;
- * 			uref.field_index = i;
- * 			uref.usage_index = j;
- * 			ioctl(fd, HIDIOCGUCODE, &uref);
- * 			ioctl(fd, HIDIOCGUSAGE, &uref);
- * 		}
- * 	}
- * 	rinfo.report_id |= HID_REPORT_ID_NEXT;
- * 	ret = ioctl(fd, HIDIOCGREPORTINFO, &rinfo);
- * }
- */
-
-
-#ifdef __KERNEL__
-
-/*
- * In-kernel definitions.
- */
-
-struct hid_device;
-struct hid_usage;
-struct hid_field;
-struct hid_report;
-
-#ifdef CONFIG_USB_HIDDEV
-int hiddev_connect(struct hid_device *hid, unsigned int force);
-void hiddev_disconnect(struct hid_device *);
-void hiddev_hid_event(struct hid_device *hid, struct hid_field *field,
-		      struct hid_usage *usage, __s32 value);
-void hiddev_report_event(struct hid_device *hid, struct hid_report *report);
-#else
-static inline int hiddev_connect(struct hid_device *hid,
-		unsigned int force)
-{ return -1; }
-static inline void hiddev_disconnect(struct hid_device *hid) { }
-static inline void hiddev_hid_event(struct hid_device *hid, struct hid_field *field,
-		      struct hid_usage *usage, __s32 value) { }
-static inline void hiddev_report_event(struct hid_device *hid, struct hid_report *report) { }
-#endif
-
-#endif
-#endif
diff --git a/ANDROID_3.4.5/include/linux/hidraw.h b/ANDROID_3.4.5/include/linux/hidraw.h
deleted file mode 100644
index 4b88e697..00000000
--- a/ANDROID_3.4.5/include/linux/hidraw.h
+++ /dev/null
@@ -1,92 +0,0 @@
-#ifndef _HIDRAW_H
-#define _HIDRAW_H
-
-/*
- *  Copyright (c) 2007 Jiri Kosina
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#include <linux/hid.h>
-#include <linux/types.h>
-
-struct hidraw_report_descriptor {
-	__u32 size;
-	__u8 value[HID_MAX_DESCRIPTOR_SIZE];
-};
-
-struct hidraw_devinfo {
-	__u32 bustype;
-	__s16 vendor;
-	__s16 product;
-};
-
-/* ioctl interface */
-#define HIDIOCGRDESCSIZE	_IOR('H', 0x01, int)
-#define HIDIOCGRDESC		_IOR('H', 0x02, struct hidraw_report_descriptor)
-#define HIDIOCGRAWINFO		_IOR('H', 0x03, struct hidraw_devinfo)
-#define HIDIOCGRAWNAME(len)     _IOC(_IOC_READ, 'H', 0x04, len)
-#define HIDIOCGRAWPHYS(len)     _IOC(_IOC_READ, 'H', 0x05, len)
-/* The first byte of SFEATURE and GFEATURE is the report number */
-#define HIDIOCSFEATURE(len)    _IOC(_IOC_WRITE|_IOC_READ, 'H', 0x06, len)
-#define HIDIOCGFEATURE(len)    _IOC(_IOC_WRITE|_IOC_READ, 'H', 0x07, len)
-
-#define HIDRAW_FIRST_MINOR 0
-#define HIDRAW_MAX_DEVICES 64
-/* number of reports to buffer */
-#define HIDRAW_BUFFER_SIZE 64
-
-
-/* kernel-only API declarations */
-#ifdef __KERNEL__
-
-struct hidraw {
-	unsigned int minor;
-	int exist;
-	int open;
-	wait_queue_head_t wait;
-	struct hid_device *hid;
-	struct device *dev;
-	struct list_head list;
-};
-
-struct hidraw_report {
-	__u8 *value;
-	int len;
-};
-
-struct hidraw_list {
-	struct hidraw_report buffer[HIDRAW_BUFFER_SIZE];
-	int head;
-	int tail;
-	struct fasync_struct *fasync;
-	struct hidraw *hidraw;
-	struct list_head node;
-	struct mutex read_mutex;
-};
-
-#ifdef CONFIG_HIDRAW
-int hidraw_init(void);
-void hidraw_exit(void);
-void hidraw_report_event(struct hid_device *, u8 *, int);
-int hidraw_connect(struct hid_device *);
-void hidraw_disconnect(struct hid_device *);
-#else
-static inline int hidraw_init(void) { return 0; }
-static inline void hidraw_exit(void) { }
-static inline void hidraw_report_event(struct hid_device *hid, u8 *data, int len) { }
-static inline int hidraw_connect(struct hid_device *hid) { return -1; }
-static inline void hidraw_disconnect(struct hid_device *hid) { }
-#endif
-
-#endif
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/highmem.h b/ANDROID_3.4.5/include/linux/highmem.h
deleted file mode 100644
index d3999b4e..00000000
--- a/ANDROID_3.4.5/include/linux/highmem.h
+++ /dev/null
@@ -1,287 +0,0 @@
-#ifndef _LINUX_HIGHMEM_H
-#define _LINUX_HIGHMEM_H
-
-#include <linux/fs.h>
-#include <linux/kernel.h>
-#include <linux/bug.h>
-#include <linux/mm.h>
-#include <linux/uaccess.h>
-#include <linux/hardirq.h>
-
-#include <asm/cacheflush.h>
-
-#ifndef ARCH_HAS_FLUSH_ANON_PAGE
-static inline void flush_anon_page(struct vm_area_struct *vma, struct page *page, unsigned long vmaddr)
-{
-}
-#endif
-
-#ifndef ARCH_HAS_FLUSH_KERNEL_DCACHE_PAGE
-static inline void flush_kernel_dcache_page(struct page *page)
-{
-}
-static inline void flush_kernel_vmap_range(void *vaddr, int size)
-{
-}
-static inline void invalidate_kernel_vmap_range(void *vaddr, int size)
-{
-}
-#endif
-
-#include <asm/kmap_types.h>
-
-#ifdef CONFIG_HIGHMEM
-#include <asm/highmem.h>
-
-/* declarations for linux/mm/highmem.c */
-unsigned int nr_free_highpages(void);
-extern unsigned long totalhigh_pages;
-
-void kmap_flush_unused(void);
-
-#else /* CONFIG_HIGHMEM */
-
-static inline unsigned int nr_free_highpages(void) { return 0; }
-
-#define totalhigh_pages 0UL
-
-#ifndef ARCH_HAS_KMAP
-static inline void *kmap(struct page *page)
-{
-	might_sleep();
-	return page_address(page);
-}
-
-static inline void kunmap(struct page *page)
-{
-}
-
-static inline void *kmap_atomic(struct page *page)
-{
-	pagefault_disable();
-	return page_address(page);
-}
-#define kmap_atomic_prot(page, prot)	kmap_atomic(page)
-
-static inline void __kunmap_atomic(void *addr)
-{
-	pagefault_enable();
-}
-
-#define kmap_atomic_pfn(pfn)	kmap_atomic(pfn_to_page(pfn))
-#define kmap_atomic_to_page(ptr)	virt_to_page(ptr)
-
-#define kmap_flush_unused()	do {} while(0)
-#endif
-
-#endif /* CONFIG_HIGHMEM */
-
-#if defined(CONFIG_HIGHMEM) || defined(CONFIG_X86_32)
-
-DECLARE_PER_CPU(int, __kmap_atomic_idx);
-
-static inline int kmap_atomic_idx_push(void)
-{
-	int idx = __this_cpu_inc_return(__kmap_atomic_idx) - 1;
-
-#ifdef CONFIG_DEBUG_HIGHMEM
-	WARN_ON_ONCE(in_irq() && !irqs_disabled());
-	BUG_ON(idx > KM_TYPE_NR);
-#endif
-	return idx;
-}
-
-static inline int kmap_atomic_idx(void)
-{
-	return __this_cpu_read(__kmap_atomic_idx) - 1;
-}
-
-static inline void kmap_atomic_idx_pop(void)
-{
-#ifdef CONFIG_DEBUG_HIGHMEM
-	int idx = __this_cpu_dec_return(__kmap_atomic_idx);
-
-	BUG_ON(idx < 0);
-#else
-	__this_cpu_dec(__kmap_atomic_idx);
-#endif
-}
-
-#endif
-
-/*
- * NOTE:
- * kmap_atomic() and kunmap_atomic() with two arguments are deprecated.
- * We only keep them for backward compatibility, any usage of them
- * are now warned.
- */
-
-#define PASTE(a, b) a ## b
-#define PASTE2(a, b) PASTE(a, b)
-
-#define NARG_(_2, _1, n, ...) n
-#define NARG(...) NARG_(__VA_ARGS__, 2, 1, :)
-
-static inline void __deprecated *kmap_atomic_deprecated(struct page *page,
-							enum km_type km)
-{
-	return kmap_atomic(page);
-}
-
-#define kmap_atomic1(...) kmap_atomic(__VA_ARGS__)
-#define kmap_atomic2(...) kmap_atomic_deprecated(__VA_ARGS__)
-#define kmap_atomic(...) PASTE2(kmap_atomic, NARG(__VA_ARGS__)(__VA_ARGS__))
-
-static inline void __deprecated __kunmap_atomic_deprecated(void *addr,
-							enum km_type km)
-{
-	__kunmap_atomic(addr);
-}
-
-/*
- * Prevent people trying to call kunmap_atomic() as if it were kunmap()
- * kunmap_atomic() should get the return value of kmap_atomic, not the page.
- */
-#define kunmap_atomic_deprecated(addr, km)                      \
-do {                                                            \
-	BUILD_BUG_ON(__same_type((addr), struct page *));       \
-	__kunmap_atomic_deprecated(addr, km);                   \
-} while (0)
-
-#define kunmap_atomic_withcheck(addr)                           \
-do {                                                            \
-	BUILD_BUG_ON(__same_type((addr), struct page *));       \
-	__kunmap_atomic(addr);                                  \
-} while (0)
-
-#define kunmap_atomic1(...) kunmap_atomic_withcheck(__VA_ARGS__)
-#define kunmap_atomic2(...) kunmap_atomic_deprecated(__VA_ARGS__)
-#define kunmap_atomic(...) PASTE2(kunmap_atomic, NARG(__VA_ARGS__)(__VA_ARGS__))
-/**** End of C pre-processor tricks for deprecated macros ****/
-
-/* when CONFIG_HIGHMEM is not set these will be plain clear/copy_page */
-#ifndef clear_user_highpage
-static inline void clear_user_highpage(struct page *page, unsigned long vaddr)
-{
-	void *addr = kmap_atomic(page);
-	clear_user_page(addr, vaddr, page);
-	kunmap_atomic(addr);
-}
-#endif
-
-#ifndef __HAVE_ARCH_ALLOC_ZEROED_USER_HIGHPAGE
-/**
- * __alloc_zeroed_user_highpage - Allocate a zeroed HIGHMEM page for a VMA with caller-specified movable GFP flags
- * @movableflags: The GFP flags related to the pages future ability to move like __GFP_MOVABLE
- * @vma: The VMA the page is to be allocated for
- * @vaddr: The virtual address the page will be inserted into
- *
- * This function will allocate a page for a VMA but the caller is expected
- * to specify via movableflags whether the page will be movable in the
- * future or not
- *
- * An architecture may override this function by defining
- * __HAVE_ARCH_ALLOC_ZEROED_USER_HIGHPAGE and providing their own
- * implementation.
- */
-static inline struct page *
-__alloc_zeroed_user_highpage(gfp_t movableflags,
-			struct vm_area_struct *vma,
-			unsigned long vaddr)
-{
-	struct page *page = alloc_page_vma(GFP_HIGHUSER | movableflags,
-			vma, vaddr);
-
-	if (page)
-		clear_user_highpage(page, vaddr);
-
-	return page;
-}
-#endif
-
-/**
- * alloc_zeroed_user_highpage_movable - Allocate a zeroed HIGHMEM page for a VMA that the caller knows can move
- * @vma: The VMA the page is to be allocated for
- * @vaddr: The virtual address the page will be inserted into
- *
- * This function will allocate a page for a VMA that the caller knows will
- * be able to migrate in the future using move_pages() or reclaimed
- */
-static inline struct page *
-alloc_zeroed_user_highpage_movable(struct vm_area_struct *vma,
-					unsigned long vaddr)
-{
-	return __alloc_zeroed_user_highpage(__GFP_MOVABLE, vma, vaddr);
-}
-
-static inline void clear_highpage(struct page *page)
-{
-	void *kaddr = kmap_atomic(page);
-	clear_page(kaddr);
-	kunmap_atomic(kaddr);
-}
-
-static inline void zero_user_segments(struct page *page,
-	unsigned start1, unsigned end1,
-	unsigned start2, unsigned end2)
-{
-	void *kaddr = kmap_atomic(page);
-
-	BUG_ON(end1 > PAGE_SIZE || end2 > PAGE_SIZE);
-
-	if (end1 > start1)
-		memset(kaddr + start1, 0, end1 - start1);
-
-	if (end2 > start2)
-		memset(kaddr + start2, 0, end2 - start2);
-
-	kunmap_atomic(kaddr);
-	flush_dcache_page(page);
-}
-
-static inline void zero_user_segment(struct page *page,
-	unsigned start, unsigned end)
-{
-	zero_user_segments(page, start, end, 0, 0);
-}
-
-static inline void zero_user(struct page *page,
-	unsigned start, unsigned size)
-{
-	zero_user_segments(page, start, start + size, 0, 0);
-}
-
-static inline void __deprecated memclear_highpage_flush(struct page *page,
-			unsigned int offset, unsigned int size)
-{
-	zero_user(page, offset, size);
-}
-
-#ifndef __HAVE_ARCH_COPY_USER_HIGHPAGE
-
-static inline void copy_user_highpage(struct page *to, struct page *from,
-	unsigned long vaddr, struct vm_area_struct *vma)
-{
-	char *vfrom, *vto;
-
-	vfrom = kmap_atomic(from);
-	vto = kmap_atomic(to);
-	copy_user_page(vto, vfrom, vaddr, to);
-	kunmap_atomic(vto);
-	kunmap_atomic(vfrom);
-}
-
-#endif
-
-static inline void copy_highpage(struct page *to, struct page *from)
-{
-	char *vfrom, *vto;
-
-	vfrom = kmap_atomic(from);
-	vto = kmap_atomic(to);
-	copy_page(vto, vfrom);
-	kunmap_atomic(vto);
-	kunmap_atomic(vfrom);
-}
-
-#endif /* _LINUX_HIGHMEM_H */
diff --git a/ANDROID_3.4.5/include/linux/highuid.h b/ANDROID_3.4.5/include/linux/highuid.h
deleted file mode 100644
index 434e5624..00000000
--- a/ANDROID_3.4.5/include/linux/highuid.h
+++ /dev/null
@@ -1,97 +0,0 @@
-#ifndef _LINUX_HIGHUID_H
-#define _LINUX_HIGHUID_H
-
-#include <linux/types.h>
-
-/*
- * general notes:
- *
- * CONFIG_UID16 is defined if the given architecture needs to
- * support backwards compatibility for old system calls.
- *
- * kernel code should use uid_t and gid_t at all times when dealing with
- * kernel-private data.
- *
- * old_uid_t and old_gid_t should only be different if CONFIG_UID16 is
- * defined, else the platform should provide dummy typedefs for them
- * such that they are equivalent to __kernel_{u,g}id_t.
- *
- * uid16_t and gid16_t are used on all architectures. (when dealing
- * with structures hard coded to 16 bits, such as in filesystems)
- */
-
-
-/*
- * This is the "overflow" UID and GID. They are used to signify uid/gid
- * overflow to old programs when they request uid/gid information but are
- * using the old 16 bit interfaces.
- * When you run a libc5 program, it will think that all highuid files or
- * processes are owned by this uid/gid.
- * The idea is that it's better to do so than possibly return 0 in lieu of
- * 65536, etc.
- */
-
-extern int overflowuid;
-extern int overflowgid;
-
-extern void __bad_uid(void);
-extern void __bad_gid(void);
-
-#define DEFAULT_OVERFLOWUID	65534
-#define DEFAULT_OVERFLOWGID	65534
-
-#ifdef CONFIG_UID16
-
-/* prevent uid mod 65536 effect by returning a default value for high UIDs */
-#define high2lowuid(uid) ((uid) & ~0xFFFF ? (old_uid_t)overflowuid : (old_uid_t)(uid))
-#define high2lowgid(gid) ((gid) & ~0xFFFF ? (old_gid_t)overflowgid : (old_gid_t)(gid))
-/*
- * -1 is different in 16 bits than it is in 32 bits
- * these macros are used by chown(), setreuid(), ...,
- */
-#define low2highuid(uid) ((uid) == (old_uid_t)-1 ? (uid_t)-1 : (uid_t)(uid))
-#define low2highgid(gid) ((gid) == (old_gid_t)-1 ? (gid_t)-1 : (gid_t)(gid))
-
-#define __convert_uid(size, uid) \
-	(size >= sizeof(uid) ? (uid) : high2lowuid(uid))
-#define __convert_gid(size, gid) \
-	(size >= sizeof(gid) ? (gid) : high2lowgid(gid))
-	
-
-#else
-
-#define __convert_uid(size, uid) (uid)
-#define __convert_gid(size, gid) (gid)
-
-#endif /* !CONFIG_UID16 */
-
-/* uid/gid input should be always 32bit uid_t */
-#define SET_UID(var, uid) do { (var) = __convert_uid(sizeof(var), (uid)); } while (0)
-#define SET_GID(var, gid) do { (var) = __convert_gid(sizeof(var), (gid)); } while (0)
-
-/*
- * Everything below this line is needed on all architectures, to deal with
- * filesystems that only store 16 bits of the UID/GID, etc.
- */
-
-/*
- * This is the UID and GID that will get written to disk if a filesystem
- * only supports 16-bit UIDs and the kernel has a high UID/GID to write
- */
-extern int fs_overflowuid;
-extern int fs_overflowgid;
-
-#define DEFAULT_FS_OVERFLOWUID	65534
-#define DEFAULT_FS_OVERFLOWGID	65534
-
-/*
- * Since these macros are used in architectures that only need limited
- * 16-bit UID back compatibility, we won't use old_uid_t and old_gid_t
- */
-#define fs_high2lowuid(uid) ((uid) & ~0xFFFF ? (uid16_t)fs_overflowuid : (uid16_t)(uid))
-#define fs_high2lowgid(gid) ((gid) & ~0xFFFF ? (gid16_t)fs_overflowgid : (gid16_t)(gid))
-
-#define low_16_bits(x)	((x) & 0xFFFF)
-#define high_16_bits(x)	(((x) & 0xFFFF0000) >> 16)
-
-#endif /* _LINUX_HIGHUID_H */
diff --git a/ANDROID_3.4.5/include/linux/hil.h b/ANDROID_3.4.5/include/linux/hil.h
deleted file mode 100644
index 523785a9..00000000
--- a/ANDROID_3.4.5/include/linux/hil.h
+++ /dev/null
@@ -1,483 +0,0 @@
-#ifndef _HIL_H_
-#define _HIL_H_
-
-/*
- * Hewlett Packard Human Interface Loop (HP-HIL) Protocol -- header.
- *
- * Copyright (c) 2001 Brian S. Julin
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions, and the following disclaimer,
- *    without modification.
- * 2. The name of the author may not be used to endorse or promote products
- *    derived from this software without specific prior written permission.
- *
- * Alternatively, this software may be distributed under the terms of the
- * GNU General Public License ("GPL").
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
- * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- *
- * References:
- * HP-HIL Technical Reference Manual.  Hewlett Packard Product No. 45918A
- *
- * A note of thanks to HP for providing and shipping reference materials
- * free of charge to help in the development of HIL support for Linux.
- *
- */
-
-#include <asm/types.h>
-
-/* Physical constants relevant to raw loop/device timing. 
- */ 
-
-#define HIL_CLOCK		8MHZ
-#define HIL_EK1_CLOCK		30HZ
-#define HIL_EK2_CLOCK		60HZ
-
-#define HIL_TIMEOUT_DEV         5	/* ms */
-#define HIL_TIMEOUT_DEVS	10	/* ms */
-#define HIL_TIMEOUT_NORESP	10	/* ms */
-#define HIL_TIMEOUT_DEVS_DATA	16	/* ms */
-#define HIL_TIMEOUT_SELFTEST	200	/* ms */
-
-
-/* Actual wire line coding.  These will only be useful if someone is 
- * implementing a software MLC to run HIL devices on a non-parisc machine.
- */
-
-#define HIL_WIRE_PACKET_LEN	15
-enum hil_wire_bitpos {
-	HIL_WIRE_START		= 0,
-	HIL_WIRE_ADDR2,
-	HIL_WIRE_ADDR1,
-	HIL_WIRE_ADDR0,
-	HIL_WIRE_COMMAND,
-	HIL_WIRE_DATA7,
-	HIL_WIRE_DATA6,
-	HIL_WIRE_DATA5,
-	HIL_WIRE_DATA4,
-	HIL_WIRE_DATA3,
-	HIL_WIRE_DATA2,
-	HIL_WIRE_DATA1,
-	HIL_WIRE_DATA0,
-	HIL_WIRE_PARITY,
-	HIL_WIRE_STOP
-};
-
-/* HP documentation uses these bit positions to refer to commands;
- * we will call these "packets".
- */
-enum hil_pkt_bitpos {
-	HIL_PKT_CMD		= 0x00000800,
-	HIL_PKT_ADDR2		= 0x00000400,
-	HIL_PKT_ADDR1		= 0x00000200,
-	HIL_PKT_ADDR0		= 0x00000100,
-	HIL_PKT_ADDR_MASK	= 0x00000700,
-	HIL_PKT_ADDR_SHIFT	= 8,
-	HIL_PKT_DATA7		= 0x00000080,
-	HIL_PKT_DATA6		= 0x00000040,
-	HIL_PKT_DATA5		= 0x00000020,
-	HIL_PKT_DATA4		= 0x00000010,
-	HIL_PKT_DATA3		= 0x00000008,
-	HIL_PKT_DATA2		= 0x00000004,
-	HIL_PKT_DATA1		= 0x00000002,
-	HIL_PKT_DATA0		= 0x00000001,
-	HIL_PKT_DATA_MASK	= 0x000000FF,
-	HIL_PKT_DATA_SHIFT	= 0
-};
-
-/* The HIL MLC also has several error/status/control bits.  We extend the 
- * "packet" to include these when direct access to the MLC is available,
- * or emulate them in cases where they are not available. 
- *
- * This way the device driver knows that the underlying MLC driver
- * has had to deal with loop errors.
- */
-enum hil_error_bitpos {
-	HIL_ERR_OB	= 0x00000800, /* MLC is busy sending an auto-poll, 
-					 or we have filled up the output 
-					 buffer and must wait. */
-	HIL_ERR_INT	= 0x00010000, /* A normal interrupt has occurred. */
-	HIL_ERR_NMI	= 0x00020000, /* An NMI has occurred. */
-	HIL_ERR_LERR	= 0x00040000, /* A poll didn't come back. */
-	HIL_ERR_PERR	= 0x01000000, /* There was a Parity Error. */
-	HIL_ERR_FERR	= 0x02000000, /* There was a Framing Error. */
-	HIL_ERR_FOF	= 0x04000000  /* Input FIFO Overflowed. */
-};
-
-enum hil_control_bitpos {
-	HIL_CTRL_TEST	= 0x00010000,
-	HIL_CTRL_IPF	= 0x00040000,
-	HIL_CTRL_APE	= 0x02000000
-};
-
-/* Bits 30,31 are unused, we use them to control write behavior. */
-#define HIL_DO_ALTER_CTRL  0x40000000 /* Write MSW of packet to control 
-                                          before writing LSW to loop */
-#define HIL_CTRL_ONLY      0xc0000000 /* *Only* alter the control registers */
-
-/* This gives us a 32-bit "packet" 
- */
-typedef u32 hil_packet;
-
-
-/* HIL Loop commands 
- */
-enum hil_command {
-	HIL_CMD_IFC	= 0x00,	/* Interface Clear */
-	HIL_CMD_EPT	= 0x01,	/* Enter Pass-Thru Mode */
-	HIL_CMD_ELB	= 0x02,	/* Enter Loop-Back Mode */
-	HIL_CMD_IDD	= 0x03,	/* Identify and Describe */
-	HIL_CMD_DSR	= 0x04,	/* Device Soft Reset */
-	HIL_CMD_PST	= 0x05,	/* Perform Self Test */
-	HIL_CMD_RRG	= 0x06,	/* Read Register */
-	HIL_CMD_WRG	= 0x07,	/* Write Register */
-	HIL_CMD_ACF	= 0x08,	/* Auto Configure */
-	HIL_CMDID_ACF	= 0x07,	/* Auto Configure bits with incremented ID */
-	HIL_CMD_POL	= 0x10,	/* Poll */
-	HIL_CMDCT_POL	= 0x0f,	/* Poll command bits with item count  */
-	HIL_CMD_RPL	= 0x20,	/* RePoll */
-	HIL_CMDCT_RPL	= 0x0f,	/* RePoll command bits with item count */
-	HIL_CMD_RNM	= 0x30,	/* Report Name */
-	HIL_CMD_RST	= 0x31,	/* Report Status */
-	HIL_CMD_EXD	= 0x32,	/* Extended Describe */
-	HIL_CMD_RSC	= 0x33,	/* Report Security Code */
-
-	/* 0x34 to 0x3c reserved for future use  */
-
-	HIL_CMD_DKA	= 0x3d,	/* Disable Keyswitch Autorepeat */
-	HIL_CMD_EK1	= 0x3e,	/* Enable Keyswitch Autorepeat 1 */
-	HIL_CMD_EK2	= 0x3f,	/* Enable Keyswitch Autorepeat 2 */
-	HIL_CMD_PR1	= 0x40,	/* Prompt1 */  
-	HIL_CMD_PR2	= 0x41,	/* Prompt2 */
-	HIL_CMD_PR3	= 0x42,	/* Prompt3 */
-	HIL_CMD_PR4	= 0x43,	/* Prompt4 */
-	HIL_CMD_PR5	= 0x44,	/* Prompt5 */
-	HIL_CMD_PR6	= 0x45,	/* Prompt6 */
-	HIL_CMD_PR7	= 0x46,	/* Prompt7 */
-	HIL_CMD_PRM	= 0x47,	/* Prompt (General Purpose) */
-	HIL_CMD_AK1	= 0x48,	/* Acknowledge1 */  
-	HIL_CMD_AK2	= 0x49,	/* Acknowledge2 */
-	HIL_CMD_AK3	= 0x4a,	/* Acknowledge3 */
-	HIL_CMD_AK4	= 0x4b,	/* Acknowledge4 */
-	HIL_CMD_AK5	= 0x4c,	/* Acknowledge5 */
-	HIL_CMD_AK6	= 0x4d,	/* Acknowledge6 */
-	HIL_CMD_AK7	= 0x4e,	/* Acknowledge7 */
-	HIL_CMD_ACK	= 0x4f,	/* Acknowledge (General Purpose) */
-
-	/* 0x50 to 0x78 reserved for future use  */
-	/* 0x80 to 0xEF device-specific commands */
-	/* 0xf0 to 0xf9 reserved for future use  */
-
-	HIL_CMD_RIO	= 0xfa,	/* Register I/O Error */
-	HIL_CMD_SHR	= 0xfb,	/* System Hard Reset */
-	HIL_CMD_TER	= 0xfc,	/* Transmission Error */
-	HIL_CMD_CAE	= 0xfd,	/* Configuration Address Error */
-	HIL_CMD_DHR	= 0xfe,	/* Device Hard Reset */
-
-	/* 0xff is prohibited from use. */
-};
-
-
-/* 
- * Response "records" to HIL commands
- */
-
-/* Device ID byte 
- */
-#define HIL_IDD_DID_TYPE_MASK		0xe0	/* Primary type bits */
-#define HIL_IDD_DID_TYPE_KB_INTEGRAL	0xa0	/* Integral keyboard */
-#define HIL_IDD_DID_TYPE_KB_ITF		0xc0	/* ITD keyboard */
-#define HIL_IDD_DID_TYPE_KB_RSVD	0xe0	/* Reserved keyboard type */
-#define HIL_IDD_DID_TYPE_KB_LANG_MASK	0x1f	/* Keyboard locale bits */
-#define HIL_IDD_DID_KBLANG_USE_ESD	0x00	/* Use ESD Locale instead */
-#define HIL_IDD_DID_TYPE_ABS		0x80    /* Absolute Positioners */
-#define HIL_IDD_DID_ABS_RSVD1_MASK	0xf8	/* Reserved */
-#define HIL_IDD_DID_ABS_RSVD1		0x98
-#define HIL_IDD_DID_ABS_TABLET_MASK	0xf8	/* Tablets and digitizers */
-#define HIL_IDD_DID_ABS_TABLET		0x90
-#define HIL_IDD_DID_ABS_TSCREEN_MASK	0xfc	/* Touch screens */
-#define HIL_IDD_DID_ABS_TSCREEN		0x8c
-#define HIL_IDD_DID_ABS_RSVD2_MASK	0xfc	/* Reserved */
-#define HIL_IDD_DID_ABS_RSVD2		0x88
-#define HIL_IDD_DID_ABS_RSVD3_MASK	0xfc	/* Reserved */
-#define HIL_IDD_DID_ABS_RSVD3		0x80
-#define HIL_IDD_DID_TYPE_REL		0x60    /* Relative Positioners */
-#define HIL_IDD_DID_REL_RSVD1_MASK	0xf0	/* Reserved */
-#define HIL_IDD_DID_REL_RSVD1		0x70
-#define HIL_IDD_DID_REL_RSVD2_MASK	0xfc	/* Reserved */
-#define HIL_IDD_DID_REL_RSVD2		0x6c
-#define HIL_IDD_DID_REL_MOUSE_MASK	0xfc	/* Mouse */
-#define HIL_IDD_DID_REL_MOUSE		0x68
-#define HIL_IDD_DID_REL_QUAD_MASK	0xf8	/* Other Quadrature Devices */
-#define HIL_IDD_DID_REL_QUAD		0x60
-#define HIL_IDD_DID_TYPE_CHAR		0x40    /* Character Entry */
-#define HIL_IDD_DID_CHAR_BARCODE_MASK	0xfc	/* Barcode Reader */
-#define HIL_IDD_DID_CHAR_BARCODE	0x5c
-#define HIL_IDD_DID_CHAR_RSVD1_MASK	0xfc	/* Reserved */
-#define HIL_IDD_DID_CHAR_RSVD1		0x58
-#define HIL_IDD_DID_CHAR_RSVD2_MASK	0xf8	/* Reserved */
-#define HIL_IDD_DID_CHAR_RSVD2		0x50
-#define HIL_IDD_DID_CHAR_RSVD3_MASK	0xf0	/* Reserved */
-#define HIL_IDD_DID_CHAR_RSVD3		0x40
-#define HIL_IDD_DID_TYPE_OTHER		0x20    /* Miscellaneous */
-#define HIL_IDD_DID_OTHER_RSVD1_MASK	0xf0	/* Reserved */
-#define HIL_IDD_DID_OTHER_RSVD1		0x30
-#define HIL_IDD_DID_OTHER_BARCODE_MASK	0xfc	/* Tone Generator */
-#define HIL_IDD_DID_OTHER_BARCODE	0x2c
-#define HIL_IDD_DID_OTHER_RSVD2_MASK	0xfc	/* Reserved */
-#define HIL_IDD_DID_OTHER_RSVD2		0x28
-#define HIL_IDD_DID_OTHER_RSVD3_MASK	0xf8	/* Reserved */
-#define HIL_IDD_DID_OTHER_RSVD3		0x20
-#define HIL_IDD_DID_TYPE_KEYPAD		0x00	/* Vectra Keyboard */
-
-/* IDD record header 
- */
-#define HIL_IDD_HEADER_AXSET_MASK	0x03    /* Number of axis in a set */
-#define HIL_IDD_HEADER_RSC		0x04	/* Supports RSC command */
-#define HIL_IDD_HEADER_EXD		0x08	/* Supports EXD command */
-#define HIL_IDD_HEADER_IOD		0x10	/* IOD byte to follow */
-#define HIL_IDD_HEADER_16BIT		0x20	/* 16 (vs. 8) bit resolution */
-#define HIL_IDD_HEADER_ABS		0x40	/* Reports Absolute Position */
-#define HIL_IDD_HEADER_2X_AXIS		0x80	/* Two sets of 1-3 axis */
-
-/* I/O Descriptor
- */
-#define HIL_IDD_IOD_NBUTTON_MASK	0x07	/* Number of buttons */
-#define HIL_IDD_IOD_PROXIMITY		0x08	/* Proximity in/out events */
-#define HIL_IDD_IOD_PROMPT_MASK		0x70	/* Number of prompts/acks */
-#define HIL_IDD_IOD_PROMPT_SHIFT	4
-#define HIL_IDD_IOD_PROMPT		0x80	/* Generic prompt/ack */
-
-#define HIL_IDD_NUM_AXES_PER_SET(header_packet) \
-((header_packet) & HIL_IDD_HEADER_AXSET_MASK)
-
-#define HIL_IDD_NUM_AXSETS(header_packet) \
-(2 - !((header_packet) & HIL_IDD_HEADER_2X_AXIS))
-
-#define HIL_IDD_LEN(header_packet) \
-((4 - !(header_packet & HIL_IDD_HEADER_IOD) -			\
-  2 * !(HIL_IDD_NUM_AXES_PER_SET(header_packet))) +		\
-  2 * HIL_IDD_NUM_AXES_PER_SET(header_packet) *			\
- !!((header_packet) & HIL_IDD_HEADER_ABS))
-
-/* The following HIL_IDD_* macros assume you have an array of 
- * packets and/or unpacked 8-bit data in the order that they 
- * were received.
- */
-
-#define HIL_IDD_AXIS_COUNTS_PER_M(header_ptr) \
-(!(HIL_IDD_NUM_AXSETS(*(header_ptr))) ? -1 :			\
-(((*(header_ptr + 1) & HIL_PKT_DATA_MASK) +			\
-  ((*(header_ptr + 2) & HIL_PKT_DATA_MASK)) << 8)		\
-* ((*(header_ptr) & HIL_IDD_HEADER_16BIT) ? 100 : 1)))
-
-#define HIL_IDD_AXIS_MAX(header_ptr, __axnum) \
-((!(*(header_ptr) & HIL_IDD_HEADER_ABS) ||			\
-  (HIL_IDD_NUM_AXES_PER_SET(*(header_ptr)) <= __axnum)) ? 0 :	\
- ((HIL_PKT_DATA_MASK & *((header_ptr) + 3 + 2 * __axnum)) +	\
-  ((HIL_PKT_DATA_MASK & *((header_ptr) + 4 + 2 * __axnum)) << 8)))
-
-#define HIL_IDD_IOD(header_ptr) \
-(*(header_ptr + HIL_IDD_LEN((*header_ptr)) - 1))
-
-#define HIL_IDD_HAS_GEN_PROMPT(header_ptr) \
-((*header_ptr & HIL_IDD_HEADER_IOD) &&				\
- (HIL_IDD_IOD(header_ptr) & HIL_IDD_IOD_PROMPT))
-
-#define HIL_IDD_HAS_GEN_PROXIMITY(header_ptr) \
-((*header_ptr & HIL_IDD_HEADER_IOD) &&				\
- (HIL_IDD_IOD(header_ptr) & HIL_IDD_IOD_PROXIMITY))
-
-#define HIL_IDD_NUM_BUTTONS(header_ptr) \
-((*header_ptr & HIL_IDD_HEADER_IOD) ?				\
- (HIL_IDD_IOD(header_ptr) & HIL_IDD_IOD_NBUTTON_MASK) : 0)
-
-#define HIL_IDD_NUM_PROMPTS(header_ptr) \
-((*header_ptr & HIL_IDD_HEADER_IOD) ?				\
- ((HIL_IDD_IOD(header_ptr) & HIL_IDD_IOD_NPROMPT_MASK)		\
-  >> HIL_IDD_IOD_PROMPT_SHIFT) : 0)
-
-/* The response to HIL EXD commands -- the "extended describe record" */
-#define	HIL_EXD_HEADER_WRG		0x03	/* Supports type2 WRG */
-#define HIL_EXD_HEADER_WRG_TYPE1	0x01	/* Supports type1 WRG */
-#define	HIL_EXD_HEADER_WRG_TYPE2	0x02	/* Supports type2 WRG */
-#define	HIL_EXD_HEADER_RRG		0x04	/* Supports RRG command */
-#define	HIL_EXD_HEADER_RNM		0x10	/* Supports RNM command */
-#define HIL_EXD_HEADER_RST		0x20	/* Supports RST command */
-#define HIL_EXD_HEADER_LOCALE		0x40	/* Contains locale code */
-
-#define HIL_EXD_NUM_RRG(header_ptr) \
-((*header_ptr & HIL_EXD_HEADER_RRG) ? \
- (*(header_ptr + 1) & HIL_PKT_DATA_MASK) : 0)
-
-#define HIL_EXD_NUM_WWG(header_ptr) \
-((*header_ptr & HIL_EXD_HEADER_WRG) ?				\
- (*(header_ptr + 2 - !(*header_ptr & HIL_EXD_HEADER_RRG)) &	\
-    HIL_PKT_DATA_MASK) : 0)
-
-#define HIL_EXD_LEN(header_ptr) \
-(!!(*header_ptr & HIL_EXD_HEADER_RRG) +				\
- !!(*header_ptr & HIL_EXD_HEADER_WRG) +				\
- !!(*header_ptr & HIL_EXD_HEADER_LOCALE) +			\
- 2 * !!(*header_ptr & HIL_EXD_HEADER_WRG_TYPE2) + 1)
-
-#define HIL_EXD_LOCALE(header_ptr) \
-(!(*header_ptr & HIL_EXD_HEADER_LOCALE) ? -1 :			\
- (*(header_ptr + HIL_EXD_LEN(header_ptr) - 1) & HIL_PKT_DATA_MASK))
-
-#define HIL_EXD_WRG_TYPE2_LEN(header_ptr) \
-(!(*header_ptr & HIL_EXD_HEADER_WRG_TYPE2) ? -1	:			\
- (*(header_ptr + HIL_EXD_LEN(header_ptr) - 2 -                  	\
-    !!(*header_ptr & HIL_EXD_HEADER_LOCALE)) & HIL_PKT_DATA_MASK) +	\
- ((*(header_ptr + HIL_EXD_LEN(header_ptr) - 1 -				\
-     !!(*header_ptr & HIL_EXD_HEADER_LOCALE)) & HIL_PKT_DATA_MASK) << 8))
-
-/* Device locale codes. */ 
-
-/* Last defined locale code.  Everything above this is "Reserved",
-   and note that this same table applies to the Device ID Byte where 
-   keyboards may have a nationality code which is only 5 bits. */
-#define HIL_LOCALE_MAX 0x1f
-
-/* Map to hopefully useful strings.  I was trying to make these look
-   like locale.aliases strings do; maybe that isn't the right table to
-   emulate.  In either case, I didn't have much to work on. */
-#define HIL_LOCALE_MAP \
-"",			/* 0x00 Reserved */		\
-"",			/* 0x01 Reserved */		\
-"",			/* 0x02 Reserved */		\
-"swiss.french",		/* 0x03 Swiss/French */		\
-"portuguese",		/* 0x04 Portuguese */		\
-"arabic",		/* 0x05 Arabic */		\
-"hebrew",		/* 0x06 Hebrew */		\
-"english.canadian",	/* 0x07 Canadian English */	\
-"turkish",		/* 0x08 Turkish */		\
-"greek",		/* 0x09 Greek */		\
-"thai",			/* 0x0a Thai (Thailand) */	\
-"italian",		/* 0x0b Italian */		\
-"korean",		/* 0x0c Hangul (Korea) */	\
-"dutch",		/* 0x0d Dutch */		\
-"swedish",		/* 0x0e Swedish */		\
-"german",		/* 0x0f German */		\
-"chinese",		/* 0x10 Chinese-PRC */		\
-"chinese",		/* 0x11 Chinese-ROC */		\
-"swiss.french",		/* 0x12 Swiss/French II */	\
-"spanish",		/* 0x13 Spanish */		\
-"swiss.german",		/* 0x14 Swiss/German II */	\
-"flemish",		/* 0x15 Belgian (Flemish) */	\
-"finnish",		/* 0x16 Finnish	*/		\
-"english.uk",		/* 0x17 United Kingdom */	\
-"french.canadian",	/* 0x18 French/Canadian */	\
-"swiss.german",		/* 0x19 Swiss/German */		\
-"norwegian",		/* 0x1a Norwegian */		\
-"french",		/* 0x1b French */		\
-"danish",		/* 0x1c Danish */		\
-"japanese",		/* 0x1d Katakana */		\
-"spanish",		/* 0x1e Latin American/Spanish*/\
-"english.us"		/* 0x1f United States */	\
-
-
-/* HIL keycodes */
-#define HIL_KEYCODES_SET1_TBLSIZE 128
-#define HIL_KEYCODES_SET1 	\
-   KEY_5,		KEY_RESERVED,	KEY_RIGHTALT,	KEY_LEFTALT,	\
-   KEY_RIGHTSHIFT,	KEY_LEFTSHIFT,	KEY_LEFTCTRL,	KEY_SYSRQ,	\
-   KEY_KP4,		KEY_KP8,	KEY_KP5,	KEY_KP9,	\
-   KEY_KP6,		KEY_KP7,	KEY_KPCOMMA,	KEY_KPENTER,	\
-   KEY_KP1,		KEY_KPSLASH,	KEY_KP2,	KEY_KPPLUS,	\
-   KEY_KP3,		KEY_KPASTERISK,	KEY_KP0,	KEY_KPMINUS,	\
-   KEY_B,		KEY_V,		KEY_C,		KEY_X,		\
-   KEY_Z,		KEY_RESERVED,	KEY_RESERVED,   KEY_ESC,	\
-   KEY_6,		KEY_F10,	KEY_3,		KEY_F11,	\
-   KEY_KPDOT,		KEY_F9,		KEY_TAB /*KP*/,	KEY_F12,	\
-   KEY_H,		KEY_G,		KEY_F,		KEY_D,		\
-   KEY_S,		KEY_A,		KEY_RESERVED,	KEY_CAPSLOCK,	\
-   KEY_U,		KEY_Y,		KEY_T,		KEY_R,		\
-   KEY_E,		KEY_W,		KEY_Q,		KEY_TAB,	\
-   KEY_7,		KEY_6,		KEY_5,		KEY_4,		\
-   KEY_3,		KEY_2,		KEY_1,		KEY_GRAVE,	\
-   KEY_F13,		KEY_F14,	KEY_F15,	KEY_F16,	\
-   KEY_F17,		KEY_F18,	KEY_F19,	KEY_F20,	\
-   KEY_MENU,		KEY_F4,		KEY_F3,		KEY_F2,		\
-   KEY_F1,		KEY_VOLUMEUP,	KEY_STOP,	KEY_SENDFILE,	\
-   KEY_SYSRQ,		KEY_F5,		KEY_F6,		KEY_F7,		\
-   KEY_F8,		KEY_VOLUMEDOWN,	KEY_DEL_EOL,	KEY_DEL_EOS,	\
-   KEY_8,		KEY_9,		KEY_0,		KEY_MINUS,	\
-   KEY_EQUAL,		KEY_BACKSPACE,	KEY_INS_LINE,	KEY_DEL_LINE,	\
-   KEY_I,		KEY_O,		KEY_P,		KEY_LEFTBRACE,	\
-   KEY_RIGHTBRACE,	KEY_BACKSLASH,	KEY_INSERT,	KEY_DELETE,	\
-   KEY_J,		KEY_K,		KEY_L,		KEY_SEMICOLON,	\
-   KEY_APOSTROPHE,	KEY_ENTER,	KEY_HOME,	KEY_PAGEUP,	\
-   KEY_M,		KEY_COMMA,	KEY_DOT,	KEY_SLASH,	\
-   KEY_BACKSLASH,	KEY_SELECT,	KEY_102ND,	KEY_PAGEDOWN,	\
-   KEY_N,		KEY_SPACE,	KEY_NEXT,	KEY_RESERVED,	\
-   KEY_LEFT,		KEY_DOWN,	KEY_UP,		KEY_RIGHT
-
-
-#define HIL_KEYCODES_SET3_TBLSIZE 128
-#define HIL_KEYCODES_SET3 	\
-  KEY_RESERVED,	KEY_ESC,	KEY_1,		KEY_2,			\
-  KEY_3,	KEY_4,		KEY_5,		KEY_6,			\
-  KEY_7,	KEY_8,		KEY_9,		KEY_0,			\
-  KEY_MINUS,	KEY_EQUAL,	KEY_BACKSPACE,	KEY_TAB,		\
-  KEY_Q,	KEY_W,		KEY_E,		KEY_R,			\
-  KEY_T,	KEY_Y,		KEY_U,		KEY_I,			\
-  KEY_O,	KEY_P,		KEY_LEFTBRACE,	KEY_RIGHTBRACE,		\
-  KEY_ENTER,	KEY_LEFTCTRL,	KEY_A,		KEY_S,			\
-  KEY_D,	KEY_F,		KEY_G,		KEY_H,			\
-  KEY_J,	KEY_K,		KEY_L,		KEY_SEMICOLON,		\
-  KEY_APOSTROPHE,KEY_GRAVE,	KEY_LEFTSHIFT,	KEY_BACKSLASH,		\
-  KEY_Z,	KEY_X,		KEY_C,		KEY_V,			\
-  KEY_B,	KEY_N,		KEY_M,		KEY_COMMA,		\
-  KEY_DOT,	KEY_SLASH,	KEY_RIGHTSHIFT,	KEY_KPASTERISK,		\
-  KEY_LEFTALT,	KEY_SPACE,	KEY_CAPSLOCK,	KEY_F1,			\
-  KEY_F2,	KEY_F3,		KEY_F4,		KEY_F5,			\
-  KEY_F6,	KEY_F7,		KEY_F8,		KEY_F9,			\
-  KEY_F10,	KEY_NUMLOCK,	KEY_SCROLLLOCK,	KEY_KP7,		\
-  KEY_KP8,	KEY_KP9,	KEY_KPMINUS,	KEY_KP4,		\
-  KEY_KP5,	KEY_KP6,	KEY_KPPLUS,	KEY_KP1,		\
-  KEY_KP2,	KEY_KP3,	KEY_KP0,	KEY_KPDOT,		\
-  KEY_SYSRQ,	KEY_RESERVED,	KEY_RESERVED,	KEY_RESERVED,		\
-  KEY_RESERVED,	KEY_RESERVED,	KEY_RESERVED,	KEY_RESERVED,		\
-  KEY_RESERVED,	KEY_RESERVED,	KEY_RESERVED,	KEY_RESERVED,		\
-  KEY_UP,	KEY_LEFT,	KEY_DOWN,	KEY_RIGHT,		\
-  KEY_HOME,	KEY_PAGEUP,	KEY_END,	KEY_PAGEDOWN,		\
-  KEY_INSERT,	KEY_DELETE,	KEY_102ND,	KEY_RESERVED,		\
-  KEY_RESERVED,	KEY_RESERVED,	KEY_RESERVED,	KEY_RESERVED,		\
-  KEY_F1,	KEY_F2,		KEY_F3,		KEY_F4,			\
-  KEY_F5,	KEY_F6,		KEY_F7,		KEY_F8,			\
-  KEY_RESERVED,	KEY_RESERVED,	KEY_RESERVED,	KEY_RESERVED,		\
-  KEY_RESERVED,	KEY_RESERVED,	KEY_RESERVED,	KEY_RESERVED
-
-
-/* Response to POL command, the "poll record header" */
-
-#define HIL_POL_NUM_AXES_MASK	0x03	/* Number of axis reported */
-#define HIL_POL_CTS		0x04	/* Device ready to receive data */
-#define HIL_POL_STATUS_PENDING	0x08	/* Device has status to report */
-#define HIL_POL_CHARTYPE_MASK	0x70	/* Type of character data to follow */
-#define HIL_POL_CHARTYPE_NONE	0x00	/* No character data to follow */
-#define HIL_POL_CHARTYPE_RSVD1	0x10	/* Reserved Set 1 */
-#define HIL_POL_CHARTYPE_ASCII	0x20	/* U.S. ASCII */
-#define HIL_POL_CHARTYPE_BINARY	0x30	/* Binary data */
-#define HIL_POL_CHARTYPE_SET1	0x40	/* Keycode Set 1 */
-#define HIL_POL_CHARTYPE_RSVD2	0x50	/* Reserved Set 2 */
-#define HIL_POL_CHARTYPE_SET2	0x60	/* Keycode Set 2 */
-#define HIL_POL_CHARTYPE_SET3	0x70	/* Keycode Set 3 */
-#define HIL_POL_AXIS_ALT	0x80	/* Data is from axis set 2 */
-
-
-#endif /* _HIL_H_ */
diff --git a/ANDROID_3.4.5/include/linux/hil_mlc.h b/ANDROID_3.4.5/include/linux/hil_mlc.h
deleted file mode 100644
index 394a8405..00000000
--- a/ANDROID_3.4.5/include/linux/hil_mlc.h
+++ /dev/null
@@ -1,168 +0,0 @@
-/*
- * HP Human Interface Loop Master Link Controller driver.
- *
- * Copyright (c) 2001 Brian S. Julin
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions, and the following disclaimer,
- *    without modification.
- * 2. The name of the author may not be used to endorse or promote products
- *    derived from this software without specific prior written permission.
- *
- * Alternatively, this software may be distributed under the terms of the
- * GNU General Public License ("GPL").
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
- * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- *
- * References:
- * HP-HIL Technical Reference Manual.  Hewlett Packard Product No. 45918A
- *
- */
-
-#include <linux/hil.h>
-#include <linux/time.h>
-#include <linux/interrupt.h>
-#include <linux/semaphore.h>
-#include <linux/serio.h>
-#include <linux/list.h>
-
-typedef struct hil_mlc hil_mlc;
-
-/* The HIL has a complicated state engine.
- * We define the structure of nodes in the state engine here.
- */
-enum hilse_act {
-  	/* HILSE_OUT prepares to receive input if the next node
-	 * is an IN or EXPECT, and then sends the given packet.
-	 */
-	HILSE_OUT = 0,
-
-  	/* HILSE_CTS checks if the loop is busy. */
-	HILSE_CTS,
-
-	/* HILSE_OUT_LAST sends the given command packet to 
-	 * the last configured/running device on the loop.
-	 */
-	HILSE_OUT_LAST,
-
-	/* HILSE_OUT_DISC sends the given command packet to
-	 * the next device past the last configured/running one.
-	 */
-	HILSE_OUT_DISC,
-
-	/* HILSE_FUNC runs a callback function with given arguments.
-	 * a positive return value causes the "ugly" branch to be taken.
-	 */
-	HILSE_FUNC,
-
-  	/* HILSE_IN simply expects any non-errored packet to arrive 
-	 * within arg usecs.
-	 */
-	HILSE_IN		= 0x100,
-
-  	/* HILSE_EXPECT expects a particular packet to arrive 
-	 * within arg usecs, any other packet is considered an error.
-	 */
-	HILSE_EXPECT,
-
-  	/* HILSE_EXPECT_LAST as above but dev field should be last 
-	 * discovered/operational device.
-	 */
-	HILSE_EXPECT_LAST,
-
-  	/* HILSE_EXPECT_LAST as above but dev field should be first 
-	 * undiscovered/inoperational device.
-	 */
-	HILSE_EXPECT_DISC
-};
-
-typedef int	(hilse_func) (hil_mlc *mlc, int arg);
-struct hilse_node {
-	enum hilse_act		act;	/* How to process this node         */
-	union {
-		hilse_func	*func;	/* Function to call if HILSE_FUNC   */
-		hil_packet	packet;	/* Packet to send or to compare     */
-	} object;
-	int			arg;	/* Timeout in usec or parm for func */
-	int			good;	/* Node to jump to on success       */
-	int			bad;	/* Node to jump to on error         */
-	int			ugly;	/* Node to jump to on timeout       */
-};
-
-/* Methods for back-end drivers, e.g. hp_sdc_mlc */
-typedef int	(hil_mlc_cts) (hil_mlc *mlc);
-typedef void	(hil_mlc_out) (hil_mlc *mlc);
-typedef int	(hil_mlc_in)  (hil_mlc *mlc, suseconds_t timeout);
-
-struct hil_mlc_devinfo {
-	uint8_t	idd[16];	/* Device ID Byte and Describe Record */
-	uint8_t	rsc[16];	/* Security Code Header and Record */
-	uint8_t	exd[16];	/* Extended Describe Record */
-	uint8_t	rnm[16];	/* Device name as returned by RNM command */
-};
-
-struct hil_mlc_serio_map {
-	hil_mlc *mlc;
-	int di_revmap;
-	int didx;
-};
-
-/* How many (possibly old/detached) devices the we try to keep track of */
-#define HIL_MLC_DEVMEM 16
-
-struct hil_mlc {
-	struct list_head	list;	/* hil_mlc is organized as linked list */
-
-	rwlock_t		lock;
-
-	void *priv; /* Data specific to a particular type of MLC */
-
-	int 			seidx;	/* Current node in state engine */
-	int			istarted, ostarted;
-
-	hil_mlc_cts		*cts;
-	struct semaphore	csem;   /* Raised when loop idle */
-
-	hil_mlc_out		*out;
-	struct semaphore	osem;   /* Raised when outpacket dispatched */
-	hil_packet		opacket;
-
-	hil_mlc_in		*in;
-	struct semaphore	isem;   /* Raised when a packet arrives */
-	hil_packet		ipacket[16];
-	hil_packet		imatch;
-	int			icount;
-	struct timeval		instart;
-	suseconds_t		intimeout;
-
-	int			ddi;	/* Last operational device id */
-	int			lcv;	/* LCV to throttle loops */
-	struct timeval		lcv_tv; /* Time loop was started */
-
-	int			di_map[7]; /* Maps below items to live devs */
-	struct hil_mlc_devinfo	di[HIL_MLC_DEVMEM];
-	struct serio		*serio[HIL_MLC_DEVMEM];
-	struct hil_mlc_serio_map serio_map[HIL_MLC_DEVMEM];
-	hil_packet		serio_opacket[HIL_MLC_DEVMEM];
-	int			serio_oidx[HIL_MLC_DEVMEM];
-	struct hil_mlc_devinfo	di_scratch; /* Temporary area */
-
-	int			opercnt;
-
-	struct tasklet_struct	*tasklet;
-};
-
-int hil_mlc_register(hil_mlc *mlc);
-int hil_mlc_unregister(hil_mlc *mlc);
diff --git a/ANDROID_3.4.5/include/linux/hippidevice.h b/ANDROID_3.4.5/include/linux/hippidevice.h
deleted file mode 100644
index f148e490..00000000
--- a/ANDROID_3.4.5/include/linux/hippidevice.h
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- * INET		An implementation of the TCP/IP protocol suite for the LINUX
- *		operating system.  INET is implemented using the BSD Socket
- *		interface as the means of communication with the user level.
- *
- *		Definitions for the HIPPI handlers.
- *
- * Version:	@(#)hippidevice.h	1.0.0	05/26/97
- *
- * Author:	Jes Sorensen, <Jes.Sorensen@cern.ch>
- *
- *		hippidevice.h is based on previous fddidevice.h work by
- *			Ross Biro
- *			Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
- *			Alan Cox, <gw4pts@gw4pts.ampr.org>
- *			Lawrence V. Stefani, <stefani@lkg.dec.com>
- *
- *		This program is free software; you can redistribute it and/or
- *		modify it under the terms of the GNU General Public License
- *		as published by the Free Software Foundation; either version
- *		2 of the License, or (at your option) any later version.
- */
-#ifndef _LINUX_HIPPIDEVICE_H
-#define _LINUX_HIPPIDEVICE_H
-
-#include <linux/if_hippi.h>
-
-#ifdef __KERNEL__
-
-struct hippi_cb {
-	__u32	ifield;
-};
-
-extern __be16 hippi_type_trans(struct sk_buff *skb, struct net_device *dev);
-extern int hippi_change_mtu(struct net_device *dev, int new_mtu);
-extern int hippi_mac_addr(struct net_device *dev, void *p);
-extern int hippi_neigh_setup_dev(struct net_device *dev, struct neigh_parms *p);
-extern struct net_device *alloc_hippi_dev(int sizeof_priv);
-#endif
-
-#endif	/* _LINUX_HIPPIDEVICE_H */
diff --git a/ANDROID_3.4.5/include/linux/hp_sdc.h b/ANDROID_3.4.5/include/linux/hp_sdc.h
deleted file mode 100644
index d392975d..00000000
--- a/ANDROID_3.4.5/include/linux/hp_sdc.h
+++ /dev/null
@@ -1,301 +0,0 @@
-/*
- * HP i8042 System Device Controller -- header
- *
- * Copyright (c) 2001 Brian S. Julin
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions, and the following disclaimer,
- *    without modification.
- * 2. The name of the author may not be used to endorse or promote products
- *    derived from this software without specific prior written permission.
- *
- * Alternatively, this software may be distributed under the terms of the
- * GNU General Public License ("GPL").
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
- * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- *
- * References:
- * 
- * HP-HIL Technical Reference Manual.  Hewlett Packard Product No. 45918A
- *
- * System Device Controller Microprocessor Firmware Theory of Operation
- * 	for Part Number 1820-4784 Revision B.  Dwg No. A-1820-4784-2
- *
- */
-
-#ifndef _LINUX_HP_SDC_H
-#define _LINUX_HP_SDC_H
-
-#include <linux/interrupt.h>
-#include <linux/types.h>
-#include <linux/time.h>
-#include <linux/timer.h>
-#if defined(__hppa__)
-#include <asm/hardware.h>
-#endif
-
-
-/* No 4X status reads take longer than this (in usec).
- */
-#define HP_SDC_MAX_REG_DELAY 20000
-
-typedef void (hp_sdc_irqhook) (int irq, void *dev_id, 
-			       uint8_t status, uint8_t data);
-
-int hp_sdc_request_timer_irq(hp_sdc_irqhook *callback);
-int hp_sdc_request_hil_irq(hp_sdc_irqhook *callback);
-int hp_sdc_request_cooked_irq(hp_sdc_irqhook *callback);
-int hp_sdc_release_timer_irq(hp_sdc_irqhook *callback);
-int hp_sdc_release_hil_irq(hp_sdc_irqhook *callback);
-int hp_sdc_release_cooked_irq(hp_sdc_irqhook *callback);
-
-typedef struct {
-	int actidx;	/* Start of act.  Acts are atomic WRT I/O to SDC */
-	int idx;	/* Index within the act */
-	int endidx;	/* transaction is over and done if idx == endidx */
-	uint8_t *seq;	/* commands/data for the transaction */
-	union {
-	  hp_sdc_irqhook   *irqhook;	/* Callback, isr or tasklet context */
-	  struct semaphore *semaphore;	/* Semaphore to sleep on. */
-	} act;
-} hp_sdc_transaction;
-int __hp_sdc_enqueue_transaction(hp_sdc_transaction *this);
-int hp_sdc_enqueue_transaction(hp_sdc_transaction *this);
-int hp_sdc_dequeue_transaction(hp_sdc_transaction *this);
-
-/* The HP_SDC_ACT* values are peculiar to this driver.
- * Nuance: never HP_SDC_ACT_DATAIN | HP_SDC_ACT_DEALLOC, use another
- * act to perform the dealloc.
- */
-#define HP_SDC_ACT_PRECMD	0x01		/* Send a command first */
-#define HP_SDC_ACT_DATAREG	0x02		/* Set data registers */
-#define HP_SDC_ACT_DATAOUT	0x04		/* Send data bytes */
-#define HP_SDC_ACT_POSTCMD      0x08            /* Send command after */
-#define HP_SDC_ACT_DATAIN	0x10		/* Collect data after */
-#define HP_SDC_ACT_DURING	0x1f
-#define HP_SDC_ACT_SEMAPHORE    0x20            /* Raise semaphore after */
-#define HP_SDC_ACT_CALLBACK	0x40		/* Pass data to IRQ handler */
-#define HP_SDC_ACT_DEALLOC	0x80		/* Destroy transaction after */
-#define HP_SDC_ACT_AFTER	0xe0
-#define HP_SDC_ACT_DEAD		0x60		/* Act timed out. */
-
-/* Rest of the flags are straightforward representation of the SDC interface */
-#define HP_SDC_STATUS_IBF	0x02	/* Input buffer full */
-
-#define HP_SDC_STATUS_IRQMASK	0xf0	/* Bits containing "level 1" irq */
-#define HP_SDC_STATUS_PERIODIC  0x10    /* Periodic 10ms timer */
-#define HP_SDC_STATUS_USERTIMER 0x20    /* "Special purpose" timer */
-#define HP_SDC_STATUS_TIMER     0x30    /* Both PERIODIC and USERTIMER */
-#define HP_SDC_STATUS_REG	0x40	/* Data from an i8042 register */
-#define HP_SDC_STATUS_HILCMD    0x50	/* Command from HIL MLC */
-#define HP_SDC_STATUS_HILDATA   0x60	/* Data from HIL MLC */
-#define HP_SDC_STATUS_PUP	0x70	/* Successful power-up self test */
-#define HP_SDC_STATUS_KCOOKED	0x80	/* Key from cooked kbd */
-#define HP_SDC_STATUS_KRPG	0xc0	/* Key from Repeat Gen */
-#define HP_SDC_STATUS_KMOD_SUP	0x10	/* Shift key is up */
-#define HP_SDC_STATUS_KMOD_CUP	0x20	/* Control key is up */
-
-#define HP_SDC_NMISTATUS_FHS	0x40	/* NMI is a fast handshake irq */
-
-/* Internal i8042 registers (there are more, but they are not too useful). */
-
-#define HP_SDC_USE		0x02	/* Resource usage (including OB bit) */
-#define HP_SDC_IM		0x04	/* Interrupt mask */
-#define HP_SDC_CFG		0x11	/* Configuration register */
-#define HP_SDC_KBLANGUAGE	0x12	/* Keyboard language */
-
-#define HP_SDC_D0		0x70	/* General purpose data buffer 0 */
-#define HP_SDC_D1		0x71	/* General purpose data buffer 1 */
-#define HP_SDC_D2		0x72	/* General purpose data buffer 2 */
-#define HP_SDC_D3		0x73	/* General purpose data buffer 3 */
-#define HP_SDC_VT1		0x74	/* Timer for voice 1 */
-#define HP_SDC_VT2		0x75	/* Timer for voice 2 */
-#define HP_SDC_VT3		0x76	/* Timer for voice 3 */
-#define HP_SDC_VT4		0x77	/* Timer for voice 4 */
-#define HP_SDC_KBN		0x78	/* Which HIL devs are Nimitz */
-#define HP_SDC_KBC		0x79	/* Which HIL devs are cooked kbds */
-#define HP_SDC_LPS		0x7a	/* i8042's view of HIL status */
-#define HP_SDC_LPC		0x7b	/* i8042's view of HIL "control" */
-#define HP_SDC_RSV  		0x7c	/* Reserved "for testing" */
-#define HP_SDC_LPR		0x7d    /* i8042 count of HIL reconfigs */
-#define HP_SDC_XTD		0x7e    /* "Extended Configuration" register */
-#define HP_SDC_STR		0x7f    /* i8042 self-test result */
-
-/* Bitfields for above registers */
-#define HP_SDC_USE_LOOP		0x04	/* Command is currently on the loop. */
-
-#define HP_SDC_IM_MASK          0x1f    /* these bits not part of cmd/status */
-#define HP_SDC_IM_FH		0x10	/* Mask the fast handshake irq */
-#define HP_SDC_IM_PT		0x08	/* Mask the periodic timer irq */
-#define HP_SDC_IM_TIMERS	0x04	/* Mask the MT/DT/CT irq */
-#define HP_SDC_IM_RESET		0x02	/* Mask the reset key irq */
-#define HP_SDC_IM_HIL		0x01	/* Mask the HIL MLC irq */
-
-#define HP_SDC_CFG_ROLLOVER	0x08	/* WTF is "N-key rollover"? */
-#define HP_SDC_CFG_KBD		0x10	/* There is a keyboard */
-#define HP_SDC_CFG_NEW		0x20	/* Supports/uses HIL MLC */
-#define HP_SDC_CFG_KBD_OLD	0x03	/* keyboard code for non-HIL */
-#define HP_SDC_CFG_KBD_NEW	0x07	/* keyboard code from HIL autoconfig */
-#define HP_SDC_CFG_REV		0x40	/* Code revision bit */
-#define HP_SDC_CFG_IDPROM	0x80	/* IDPROM present in kbd (not HIL) */
-
-#define HP_SDC_LPS_NDEV		0x07	/* # devices autoconfigured on HIL */
-#define HP_SDC_LPS_ACSUCC	0x08	/* loop autoconfigured successfully */
-#define HP_SDC_LPS_ACFAIL	0x80	/* last loop autoconfigure failed */
-
-#define HP_SDC_LPC_APE_IPF	0x01	/* HIL MLC APE/IPF (autopoll) set */
-#define HP_SDC_LPC_ARCONERR	0x02	/* i8042 autoreconfigs loop on err */
-#define HP_SDC_LPC_ARCQUIET	0x03	/* i8042 doesn't report autoreconfigs*/
-#define HP_SDC_LPC_COOK		0x10	/* i8042 cooks devices in _KBN */
-#define HP_SDC_LPC_RC		0x80	/* causes autoreconfig */
-
-#define HP_SDC_XTD_REV		0x07	/* contains revision code */
-#define HP_SDC_XTD_REV_STRINGS(val, str) \
-switch (val) {						\
-	case 0x1: str = "1820-3712"; break;		\
-	case 0x2: str = "1820-4379"; break;		\
-	case 0x3: str = "1820-4784"; break;		\
-	default: str = "unknown";			\
-};
-#define HP_SDC_XTD_BEEPER	0x08	/* TI SN76494 beeper available */
-#define HP_SDC_XTD_BBRTC	0x20	/* OKI MSM-58321 BBRTC present */
-
-#define HP_SDC_CMD_LOAD_RT	0x31	/* Load real time (from 8042) */
-#define HP_SDC_CMD_LOAD_FHS	0x36	/* Load the fast handshake timer */
-#define HP_SDC_CMD_LOAD_MT	0x38	/* Load the match timer */
-#define HP_SDC_CMD_LOAD_DT	0x3B	/* Load the delay timer */
-#define HP_SDC_CMD_LOAD_CT	0x3E	/* Load the cycle timer */
-
-#define HP_SDC_CMD_SET_IM	0x40    /* 010xxxxx == set irq mask */
-
-/* The documents provided do not explicitly state that all registers betweem 
- * 0x01 and 0x1f inclusive can be read by sending their register index as a 
- * command, but this is implied and appears to be the case.
- */
-#define HP_SDC_CMD_READ_RAM	0x00	/* Load from i8042 RAM (autoinc) */
-#define HP_SDC_CMD_READ_USE	0x02	/* Undocumented! Load from usage reg */
-#define HP_SDC_CMD_READ_IM	0x04	/* Load current interrupt mask */
-#define HP_SDC_CMD_READ_KCC	0x11	/* Load primary kbd config code */
-#define HP_SDC_CMD_READ_KLC	0x12	/* Load primary kbd language code */
-#define HP_SDC_CMD_READ_T1	0x13	/* Load timer output buffer byte 1 */
-#define HP_SDC_CMD_READ_T2	0x14	/* Load timer output buffer byte 1 */
-#define HP_SDC_CMD_READ_T3	0x15	/* Load timer output buffer byte 1 */
-#define HP_SDC_CMD_READ_T4	0x16	/* Load timer output buffer byte 1 */
-#define HP_SDC_CMD_READ_T5	0x17	/* Load timer output buffer byte 1 */
-#define HP_SDC_CMD_READ_D0	0xf0	/* Load from i8042 RAM location 0x70 */
-#define HP_SDC_CMD_READ_D1	0xf1	/* Load from i8042 RAM location 0x71 */
-#define HP_SDC_CMD_READ_D2	0xf2	/* Load from i8042 RAM location 0x72 */
-#define HP_SDC_CMD_READ_D3	0xf3	/* Load from i8042 RAM location 0x73 */
-#define HP_SDC_CMD_READ_VT1	0xf4	/* Load from i8042 RAM location 0x74 */
-#define HP_SDC_CMD_READ_VT2	0xf5	/* Load from i8042 RAM location 0x75 */
-#define HP_SDC_CMD_READ_VT3	0xf6	/* Load from i8042 RAM location 0x76 */
-#define HP_SDC_CMD_READ_VT4	0xf7	/* Load from i8042 RAM location 0x77 */
-#define HP_SDC_CMD_READ_KBN	0xf8	/* Load from i8042 RAM location 0x78 */
-#define HP_SDC_CMD_READ_KBC	0xf9	/* Load from i8042 RAM location 0x79 */
-#define HP_SDC_CMD_READ_LPS	0xfa	/* Load from i8042 RAM location 0x7a */
-#define HP_SDC_CMD_READ_LPC	0xfb	/* Load from i8042 RAM location 0x7b */
-#define HP_SDC_CMD_READ_RSV	0xfc	/* Load from i8042 RAM location 0x7c */
-#define HP_SDC_CMD_READ_LPR	0xfd	/* Load from i8042 RAM location 0x7d */
-#define HP_SDC_CMD_READ_XTD	0xfe	/* Load from i8042 RAM location 0x7e */
-#define HP_SDC_CMD_READ_STR	0xff	/* Load from i8042 RAM location 0x7f */
-
-#define HP_SDC_CMD_SET_ARD	0xA0	/* Set emulated autorepeat delay */
-#define HP_SDC_CMD_SET_ARR	0xA2	/* Set emulated autorepeat rate */
-#define HP_SDC_CMD_SET_BELL	0xA3	/* Set voice 3 params for "beep" cmd */
-#define HP_SDC_CMD_SET_RPGR	0xA6	/* Set "RPG" irq rate (doesn't work) */
-#define HP_SDC_CMD_SET_RTMS	0xAD	/* Set the RTC time (milliseconds) */
-#define HP_SDC_CMD_SET_RTD	0xAF	/* Set the RTC time (days) */
-#define HP_SDC_CMD_SET_FHS	0xB2	/* Set fast handshake timer */
-#define HP_SDC_CMD_SET_MT	0xB4	/* Set match timer */
-#define HP_SDC_CMD_SET_DT	0xB7	/* Set delay timer */
-#define HP_SDC_CMD_SET_CT	0xBA	/* Set cycle timer */
-#define HP_SDC_CMD_SET_RAMP	0xC1	/* Reset READ_RAM autoinc counter */
-#define HP_SDC_CMD_SET_D0	0xe0	/* Load to i8042 RAM location 0x70 */
-#define HP_SDC_CMD_SET_D1	0xe1	/* Load to i8042 RAM location 0x71 */
-#define HP_SDC_CMD_SET_D2	0xe2	/* Load to i8042 RAM location 0x72 */
-#define HP_SDC_CMD_SET_D3	0xe3	/* Load to i8042 RAM location 0x73 */
-#define HP_SDC_CMD_SET_VT1	0xe4	/* Load to i8042 RAM location 0x74 */
-#define HP_SDC_CMD_SET_VT2	0xe5	/* Load to i8042 RAM location 0x75 */
-#define HP_SDC_CMD_SET_VT3	0xe6	/* Load to i8042 RAM location 0x76 */
-#define HP_SDC_CMD_SET_VT4	0xe7	/* Load to i8042 RAM location 0x77 */
-#define HP_SDC_CMD_SET_KBN	0xe8	/* Load to i8042 RAM location 0x78 */
-#define HP_SDC_CMD_SET_KBC	0xe9	/* Load to i8042 RAM location 0x79 */
-#define HP_SDC_CMD_SET_LPS	0xea	/* Load to i8042 RAM location 0x7a */
-#define HP_SDC_CMD_SET_LPC	0xeb	/* Load to i8042 RAM location 0x7b */
-#define HP_SDC_CMD_SET_RSV	0xec	/* Load to i8042 RAM location 0x7c */
-#define HP_SDC_CMD_SET_LPR	0xed	/* Load to i8042 RAM location 0x7d */
-#define HP_SDC_CMD_SET_XTD	0xee	/* Load to i8042 RAM location 0x7e */
-#define HP_SDC_CMD_SET_STR	0xef	/* Load to i8042 RAM location 0x7f */
-
-#define HP_SDC_CMD_DO_RTCW	0xc2	/* i8042 RAM 0x70 --> RTC */
-#define HP_SDC_CMD_DO_RTCR	0xc3	/* RTC[0x70 0:3] --> irq/status/data */
-#define HP_SDC_CMD_DO_BEEP	0xc4	/* i8042 RAM 0x70-74  --> beeper,VT3 */
-#define HP_SDC_CMD_DO_HIL	0xc5	/* i8042 RAM 0x70-73 --> 
-					   HIL MLC R0,R1 i8042 HIL watchdog */
-
-/* Values used to (de)mangle input/output to/from the HIL MLC */
-#define HP_SDC_DATA		0x40	/* Data from an 8042 register */
-#define HP_SDC_HIL_CMD		0x50	/* Data from HIL MLC R1/8042 */
-#define HP_SDC_HIL_R1MASK	0x0f	/* Contents of HIL MLC R1 0:3 */
-#define HP_SDC_HIL_AUTO		0x10	/* Set if POL results from i8042 */   
-#define HP_SDC_HIL_ISERR	0x80	/* Has meaning as in next 4 values */
-#define HP_SDC_HIL_RC_DONE	0x80	/* i8042 auto-configured loop */
-#define HP_SDC_HIL_ERR		0x81	/* HIL MLC R2 had a bit set */
-#define HP_SDC_HIL_TO		0x82	/* i8042 HIL watchdog expired */
-#define HP_SDC_HIL_RC		0x84	/* i8042 is auto-configuring loop */
-#define HP_SDC_HIL_DAT		0x60	/* Data from HIL MLC R0 */
-
-
-typedef struct {
-	rwlock_t	ibf_lock;
-	rwlock_t	lock;		/* user/tasklet lock */
-	rwlock_t	rtq_lock;	/* isr/tasklet lock */
-	rwlock_t	hook_lock;	/* isr/user lock for handler add/del */
-
-	unsigned int	irq, nmi;	/* Our IRQ lines */
-	unsigned long	base_io, status_io, data_io; /* Our IO ports */
-
-	uint8_t		im;		/* Interrupt mask */
-	int		set_im; 	/* Interrupt mask needs to be set. */
-
-	int		ibf;		/* Last known status of IBF flag */
-	uint8_t		wi;		/* current i8042 write index */
-	uint8_t		r7[4];          /* current i8042[0x70 - 0x74] values */
-	uint8_t		r11, r7e;	/* Values from version/revision regs */
-
-	hp_sdc_irqhook	*timer, *reg, *hil, *pup, *cooked;
-
-#define HP_SDC_QUEUE_LEN 16
-	hp_sdc_transaction *tq[HP_SDC_QUEUE_LEN]; /* All pending read/writes */
-
-	int		rcurr, rqty;	/* Current read transact in process */
-	struct timeval	rtv;		/* Time when current read started */
-	int		wcurr;		/* Current write transact in process */
-
-	int		dev_err;	/* carries status from registration */
-#if defined(__hppa__)
-	struct parisc_device	*dev;
-#elif defined(__mc68000__)
-	void		*dev;
-#else
-#error No support for device registration on this arch yet.
-#endif
-
-	struct timer_list kicker;	/* Keeps below task alive */
-	struct tasklet_struct	task;
-
-} hp_i8042_sdc;
-
-#endif /* _LINUX_HP_SDC_H */
diff --git a/ANDROID_3.4.5/include/linux/hpet.h b/ANDROID_3.4.5/include/linux/hpet.h
deleted file mode 100644
index 219ca4f6..00000000
--- a/ANDROID_3.4.5/include/linux/hpet.h
+++ /dev/null
@@ -1,131 +0,0 @@
-#ifndef	__HPET__
-#define	__HPET__ 1
-
-#include <linux/compiler.h>
-
-#ifdef __KERNEL__
-
-/*
- * Offsets into HPET Registers
- */
-
-struct hpet {
-	u64 hpet_cap;		/* capabilities */
-	u64 res0;		/* reserved */
-	u64 hpet_config;	/* configuration */
-	u64 res1;		/* reserved */
-	u64 hpet_isr;		/* interrupt status reg */
-	u64 res2[25];		/* reserved */
-	union {			/* main counter */
-		u64 _hpet_mc64;
-		u32 _hpet_mc32;
-		unsigned long _hpet_mc;
-	} _u0;
-	u64 res3;		/* reserved */
-	struct hpet_timer {
-		u64 hpet_config;	/* configuration/cap */
-		union {		/* timer compare register */
-			u64 _hpet_hc64;
-			u32 _hpet_hc32;
-			unsigned long _hpet_compare;
-		} _u1;
-		u64 hpet_fsb[2];	/* FSB route */
-	} hpet_timers[1];
-};
-
-#define	hpet_mc		_u0._hpet_mc
-#define	hpet_compare	_u1._hpet_compare
-
-#define	HPET_MAX_TIMERS	(32)
-#define	HPET_MAX_IRQ	(32)
-
-/*
- * HPET general capabilities register
- */
-
-#define	HPET_COUNTER_CLK_PERIOD_MASK	(0xffffffff00000000ULL)
-#define	HPET_COUNTER_CLK_PERIOD_SHIFT	(32UL)
-#define	HPET_VENDOR_ID_MASK		(0x00000000ffff0000ULL)
-#define	HPET_VENDOR_ID_SHIFT		(16ULL)
-#define	HPET_LEG_RT_CAP_MASK		(0x8000)
-#define	HPET_COUNTER_SIZE_MASK		(0x2000)
-#define	HPET_NUM_TIM_CAP_MASK		(0x1f00)
-#define	HPET_NUM_TIM_CAP_SHIFT		(8ULL)
-
-/*
- * HPET general configuration register
- */
-
-#define	HPET_LEG_RT_CNF_MASK		(2UL)
-#define	HPET_ENABLE_CNF_MASK		(1UL)
-
-
-/*
- * Timer configuration register
- */
-
-#define	Tn_INT_ROUTE_CAP_MASK		(0xffffffff00000000ULL)
-#define	Tn_INT_ROUTE_CAP_SHIFT		(32UL)
-#define	Tn_FSB_INT_DELCAP_MASK		(0x8000UL)
-#define	Tn_FSB_INT_DELCAP_SHIFT		(15)
-#define	Tn_FSB_EN_CNF_MASK		(0x4000UL)
-#define	Tn_FSB_EN_CNF_SHIFT		(14)
-#define	Tn_INT_ROUTE_CNF_MASK		(0x3e00UL)
-#define	Tn_INT_ROUTE_CNF_SHIFT		(9)
-#define	Tn_32MODE_CNF_MASK		(0x0100UL)
-#define	Tn_VAL_SET_CNF_MASK		(0x0040UL)
-#define	Tn_SIZE_CAP_MASK		(0x0020UL)
-#define	Tn_PER_INT_CAP_MASK		(0x0010UL)
-#define	Tn_TYPE_CNF_MASK		(0x0008UL)
-#define	Tn_INT_ENB_CNF_MASK		(0x0004UL)
-#define	Tn_INT_TYPE_CNF_MASK		(0x0002UL)
-
-/*
- * Timer FSB Interrupt Route Register
- */
-
-#define	Tn_FSB_INT_ADDR_MASK		(0xffffffff00000000ULL)
-#define	Tn_FSB_INT_ADDR_SHIFT		(32UL)
-#define	Tn_FSB_INT_VAL_MASK		(0x00000000ffffffffULL)
-
-/*
- * exported interfaces
- */
-
-struct hpet_data {
-	unsigned long hd_phys_address;
-	void __iomem *hd_address;
-	unsigned short hd_nirqs;
-	unsigned int hd_state;	/* timer allocated */
-	unsigned int hd_irq[HPET_MAX_TIMERS];
-};
-
-static inline void hpet_reserve_timer(struct hpet_data *hd, int timer)
-{
-	hd->hd_state |= (1 << timer);
-	return;
-}
-
-int hpet_alloc(struct hpet_data *);
-
-#endif /* __KERNEL__ */
-
-struct hpet_info {
-	unsigned long hi_ireqfreq;	/* Hz */
-	unsigned long hi_flags;	/* information */
-	unsigned short hi_hpet;
-	unsigned short hi_timer;
-};
-
-#define HPET_INFO_PERIODIC	0x0010	/* periodic-capable comparator */
-
-#define	HPET_IE_ON	_IO('h', 0x01)	/* interrupt on */
-#define	HPET_IE_OFF	_IO('h', 0x02)	/* interrupt off */
-#define	HPET_INFO	_IOR('h', 0x03, struct hpet_info)
-#define	HPET_EPI	_IO('h', 0x04)	/* enable periodic */
-#define	HPET_DPI	_IO('h', 0x05)	/* disable periodic */
-#define	HPET_IRQFREQ	_IOW('h', 0x6, unsigned long)	/* IRQFREQ usec */
-
-#define MAX_HPET_TBS	8		/* maximum hpet timer blocks */
-
-#endif				/* !__HPET__ */
diff --git a/ANDROID_3.4.5/include/linux/hrtimer.h b/ANDROID_3.4.5/include/linux/hrtimer.h
deleted file mode 100644
index fd0dc30c..00000000
--- a/ANDROID_3.4.5/include/linux/hrtimer.h
+++ /dev/null
@@ -1,453 +0,0 @@
-/*
- *  include/linux/hrtimer.h
- *
- *  hrtimers - High-resolution kernel timers
- *
- *   Copyright(C) 2005, Thomas Gleixner <tglx@linutronix.de>
- *   Copyright(C) 2005, Red Hat, Inc., Ingo Molnar
- *
- *  data type definitions, declarations, prototypes
- *
- *  Started by: Thomas Gleixner and Ingo Molnar
- *
- *  For licencing details see kernel-base/COPYING
- */
-#ifndef _LINUX_HRTIMER_H
-#define _LINUX_HRTIMER_H
-
-#include <linux/rbtree.h>
-#include <linux/ktime.h>
-#include <linux/init.h>
-#include <linux/list.h>
-#include <linux/wait.h>
-#include <linux/percpu.h>
-#include <linux/timer.h>
-#include <linux/timerqueue.h>
-
-struct hrtimer_clock_base;
-struct hrtimer_cpu_base;
-
-/*
- * Mode arguments of xxx_hrtimer functions:
- */
-enum hrtimer_mode {
-	HRTIMER_MODE_ABS = 0x0,		/* Time value is absolute */
-	HRTIMER_MODE_REL = 0x1,		/* Time value is relative to now */
-	HRTIMER_MODE_PINNED = 0x02,	/* Timer is bound to CPU */
-	HRTIMER_MODE_ABS_PINNED = 0x02,
-	HRTIMER_MODE_REL_PINNED = 0x03,
-};
-
-/*
- * Return values for the callback function
- */
-enum hrtimer_restart {
-	HRTIMER_NORESTART,	/* Timer is not restarted */
-	HRTIMER_RESTART,	/* Timer must be restarted */
-};
-
-/*
- * Values to track state of the timer
- *
- * Possible states:
- *
- * 0x00		inactive
- * 0x01		enqueued into rbtree
- * 0x02		callback function running
- * 0x04		timer is migrated to another cpu
- *
- * Special cases:
- * 0x03		callback function running and enqueued
- *		(was requeued on another CPU)
- * 0x05		timer was migrated on CPU hotunplug
- *
- * The "callback function running and enqueued" status is only possible on
- * SMP. It happens for example when a posix timer expired and the callback
- * queued a signal. Between dropping the lock which protects the posix timer
- * and reacquiring the base lock of the hrtimer, another CPU can deliver the
- * signal and rearm the timer. We have to preserve the callback running state,
- * as otherwise the timer could be removed before the softirq code finishes the
- * the handling of the timer.
- *
- * The HRTIMER_STATE_ENQUEUED bit is always or'ed to the current state
- * to preserve the HRTIMER_STATE_CALLBACK in the above scenario. This
- * also affects HRTIMER_STATE_MIGRATE where the preservation is not
- * necessary. HRTIMER_STATE_MIGRATE is cleared after the timer is
- * enqueued on the new cpu.
- *
- * All state transitions are protected by cpu_base->lock.
- */
-#define HRTIMER_STATE_INACTIVE	0x00
-#define HRTIMER_STATE_ENQUEUED	0x01
-#define HRTIMER_STATE_CALLBACK	0x02
-#define HRTIMER_STATE_MIGRATE	0x04
-
-/**
- * struct hrtimer - the basic hrtimer structure
- * @node:	timerqueue node, which also manages node.expires,
- *		the absolute expiry time in the hrtimers internal
- *		representation. The time is related to the clock on
- *		which the timer is based. Is setup by adding
- *		slack to the _softexpires value. For non range timers
- *		identical to _softexpires.
- * @_softexpires: the absolute earliest expiry time of the hrtimer.
- *		The time which was given as expiry time when the timer
- *		was armed.
- * @function:	timer expiry callback function
- * @base:	pointer to the timer base (per cpu and per clock)
- * @state:	state information (See bit values above)
- * @start_site:	timer statistics field to store the site where the timer
- *		was started
- * @start_comm: timer statistics field to store the name of the process which
- *		started the timer
- * @start_pid: timer statistics field to store the pid of the task which
- *		started the timer
- *
- * The hrtimer structure must be initialized by hrtimer_init()
- */
-struct hrtimer {
-	struct timerqueue_node		node;
-	ktime_t				_softexpires;
-	enum hrtimer_restart		(*function)(struct hrtimer *);
-	struct hrtimer_clock_base	*base;
-	unsigned long			state;
-#ifdef CONFIG_TIMER_STATS
-	int				start_pid;
-	void				*start_site;
-	char				start_comm[16];
-#endif
-};
-
-/**
- * struct hrtimer_sleeper - simple sleeper structure
- * @timer:	embedded timer structure
- * @task:	task to wake up
- *
- * task is set to NULL, when the timer expires.
- */
-struct hrtimer_sleeper {
-	struct hrtimer timer;
-	struct task_struct *task;
-};
-
-/**
- * struct hrtimer_clock_base - the timer base for a specific clock
- * @cpu_base:		per cpu clock base
- * @index:		clock type index for per_cpu support when moving a
- *			timer to a base on another cpu.
- * @clockid:		clock id for per_cpu support
- * @active:		red black tree root node for the active timers
- * @resolution:		the resolution of the clock, in nanoseconds
- * @get_time:		function to retrieve the current time of the clock
- * @softirq_time:	the time when running the hrtimer queue in the softirq
- * @offset:		offset of this clock to the monotonic base
- */
-struct hrtimer_clock_base {
-	struct hrtimer_cpu_base	*cpu_base;
-	int			index;
-	clockid_t		clockid;
-	struct timerqueue_head	active;
-	ktime_t			resolution;
-	ktime_t			(*get_time)(void);
-	ktime_t			softirq_time;
-	ktime_t			offset;
-};
-
-enum  hrtimer_base_type {
-	HRTIMER_BASE_MONOTONIC,
-	HRTIMER_BASE_REALTIME,
-	HRTIMER_BASE_BOOTTIME,
-	HRTIMER_MAX_CLOCK_BASES,
-};
-
-/*
- * struct hrtimer_cpu_base - the per cpu clock bases
- * @lock:		lock protecting the base and associated clock bases
- *			and timers
- * @active_bases:	Bitfield to mark bases with active timers
- * @expires_next:	absolute time of the next event which was scheduled
- *			via clock_set_next_event()
- * @hres_active:	State of high resolution mode
- * @hang_detected:	The last hrtimer interrupt detected a hang
- * @nr_events:		Total number of hrtimer interrupt events
- * @nr_retries:		Total number of hrtimer interrupt retries
- * @nr_hangs:		Total number of hrtimer interrupt hangs
- * @max_hang_time:	Maximum time spent in hrtimer_interrupt
- * @clock_base:		array of clock bases for this cpu
- */
-struct hrtimer_cpu_base {
-	raw_spinlock_t			lock;
-	unsigned long			active_bases;
-#ifdef CONFIG_HIGH_RES_TIMERS
-	ktime_t				expires_next;
-	int				hres_active;
-	int				hang_detected;
-	unsigned long			nr_events;
-	unsigned long			nr_retries;
-	unsigned long			nr_hangs;
-	ktime_t				max_hang_time;
-#endif
-	struct hrtimer_clock_base	clock_base[HRTIMER_MAX_CLOCK_BASES];
-};
-
-static inline void hrtimer_set_expires(struct hrtimer *timer, ktime_t time)
-{
-	timer->node.expires = time;
-	timer->_softexpires = time;
-}
-
-static inline void hrtimer_set_expires_range(struct hrtimer *timer, ktime_t time, ktime_t delta)
-{
-	timer->_softexpires = time;
-	timer->node.expires = ktime_add_safe(time, delta);
-}
-
-static inline void hrtimer_set_expires_range_ns(struct hrtimer *timer, ktime_t time, unsigned long delta)
-{
-	timer->_softexpires = time;
-	timer->node.expires = ktime_add_safe(time, ns_to_ktime(delta));
-}
-
-static inline void hrtimer_set_expires_tv64(struct hrtimer *timer, s64 tv64)
-{
-	timer->node.expires.tv64 = tv64;
-	timer->_softexpires.tv64 = tv64;
-}
-
-static inline void hrtimer_add_expires(struct hrtimer *timer, ktime_t time)
-{
-	timer->node.expires = ktime_add_safe(timer->node.expires, time);
-	timer->_softexpires = ktime_add_safe(timer->_softexpires, time);
-}
-
-static inline void hrtimer_add_expires_ns(struct hrtimer *timer, u64 ns)
-{
-	timer->node.expires = ktime_add_ns(timer->node.expires, ns);
-	timer->_softexpires = ktime_add_ns(timer->_softexpires, ns);
-}
-
-static inline ktime_t hrtimer_get_expires(const struct hrtimer *timer)
-{
-	return timer->node.expires;
-}
-
-static inline ktime_t hrtimer_get_softexpires(const struct hrtimer *timer)
-{
-	return timer->_softexpires;
-}
-
-static inline s64 hrtimer_get_expires_tv64(const struct hrtimer *timer)
-{
-	return timer->node.expires.tv64;
-}
-static inline s64 hrtimer_get_softexpires_tv64(const struct hrtimer *timer)
-{
-	return timer->_softexpires.tv64;
-}
-
-static inline s64 hrtimer_get_expires_ns(const struct hrtimer *timer)
-{
-	return ktime_to_ns(timer->node.expires);
-}
-
-static inline ktime_t hrtimer_expires_remaining(const struct hrtimer *timer)
-{
-	return ktime_sub(timer->node.expires, timer->base->get_time());
-}
-
-#ifdef CONFIG_HIGH_RES_TIMERS
-struct clock_event_device;
-
-extern void hrtimer_interrupt(struct clock_event_device *dev);
-
-/*
- * In high resolution mode the time reference must be read accurate
- */
-static inline ktime_t hrtimer_cb_get_time(struct hrtimer *timer)
-{
-	return timer->base->get_time();
-}
-
-static inline int hrtimer_is_hres_active(struct hrtimer *timer)
-{
-	return timer->base->cpu_base->hres_active;
-}
-
-extern void hrtimer_peek_ahead_timers(void);
-
-/*
- * The resolution of the clocks. The resolution value is returned in
- * the clock_getres() system call to give application programmers an
- * idea of the (in)accuracy of timers. Timer values are rounded up to
- * this resolution values.
- */
-# define HIGH_RES_NSEC		1
-# define KTIME_HIGH_RES		(ktime_t) { .tv64 = HIGH_RES_NSEC }
-# define MONOTONIC_RES_NSEC	HIGH_RES_NSEC
-# define KTIME_MONOTONIC_RES	KTIME_HIGH_RES
-
-#else
-
-# define MONOTONIC_RES_NSEC	LOW_RES_NSEC
-# define KTIME_MONOTONIC_RES	KTIME_LOW_RES
-
-static inline void hrtimer_peek_ahead_timers(void) { }
-
-/*
- * In non high resolution mode the time reference is taken from
- * the base softirq time variable.
- */
-static inline ktime_t hrtimer_cb_get_time(struct hrtimer *timer)
-{
-	return timer->base->softirq_time;
-}
-
-static inline int hrtimer_is_hres_active(struct hrtimer *timer)
-{
-	return 0;
-}
-#endif
-
-extern void clock_was_set(void);
-#ifdef CONFIG_TIMERFD
-extern void timerfd_clock_was_set(void);
-#else
-static inline void timerfd_clock_was_set(void) { }
-#endif
-extern void hrtimers_resume(void);
-
-extern ktime_t ktime_get(void);
-extern ktime_t ktime_get_real(void);
-extern ktime_t ktime_get_boottime(void);
-extern ktime_t ktime_get_monotonic_offset(void);
-
-DECLARE_PER_CPU(struct tick_device, tick_cpu_device);
-
-
-/* Exported timer functions: */
-
-/* Initialize timers: */
-extern void hrtimer_init(struct hrtimer *timer, clockid_t which_clock,
-			 enum hrtimer_mode mode);
-
-#ifdef CONFIG_DEBUG_OBJECTS_TIMERS
-extern void hrtimer_init_on_stack(struct hrtimer *timer, clockid_t which_clock,
-				  enum hrtimer_mode mode);
-
-extern void destroy_hrtimer_on_stack(struct hrtimer *timer);
-#else
-static inline void hrtimer_init_on_stack(struct hrtimer *timer,
-					 clockid_t which_clock,
-					 enum hrtimer_mode mode)
-{
-	hrtimer_init(timer, which_clock, mode);
-}
-static inline void destroy_hrtimer_on_stack(struct hrtimer *timer) { }
-#endif
-
-/* Basic timer operations: */
-extern int hrtimer_start(struct hrtimer *timer, ktime_t tim,
-			 const enum hrtimer_mode mode);
-extern int hrtimer_start_range_ns(struct hrtimer *timer, ktime_t tim,
-			unsigned long range_ns, const enum hrtimer_mode mode);
-extern int
-__hrtimer_start_range_ns(struct hrtimer *timer, ktime_t tim,
-			 unsigned long delta_ns,
-			 const enum hrtimer_mode mode, int wakeup);
-
-extern int hrtimer_cancel(struct hrtimer *timer);
-extern int hrtimer_try_to_cancel(struct hrtimer *timer);
-
-static inline int hrtimer_start_expires(struct hrtimer *timer,
-						enum hrtimer_mode mode)
-{
-	unsigned long delta;
-	ktime_t soft, hard;
-	soft = hrtimer_get_softexpires(timer);
-	hard = hrtimer_get_expires(timer);
-	delta = ktime_to_ns(ktime_sub(hard, soft));
-	return hrtimer_start_range_ns(timer, soft, delta, mode);
-}
-
-static inline int hrtimer_restart(struct hrtimer *timer)
-{
-	return hrtimer_start_expires(timer, HRTIMER_MODE_ABS);
-}
-
-/* Query timers: */
-extern ktime_t hrtimer_get_remaining(const struct hrtimer *timer);
-extern int hrtimer_get_res(const clockid_t which_clock, struct timespec *tp);
-
-extern ktime_t hrtimer_get_next_event(void);
-
-/*
- * A timer is active, when it is enqueued into the rbtree or the
- * callback function is running or it's in the state of being migrated
- * to another cpu.
- */
-static inline int hrtimer_active(const struct hrtimer *timer)
-{
-	return timer->state != HRTIMER_STATE_INACTIVE;
-}
-
-/*
- * Helper function to check, whether the timer is on one of the queues
- */
-static inline int hrtimer_is_queued(struct hrtimer *timer)
-{
-	return timer->state & HRTIMER_STATE_ENQUEUED;
-}
-
-/*
- * Helper function to check, whether the timer is running the callback
- * function
- */
-static inline int hrtimer_callback_running(struct hrtimer *timer)
-{
-	return timer->state & HRTIMER_STATE_CALLBACK;
-}
-
-/* Forward a hrtimer so it expires after now: */
-extern u64
-hrtimer_forward(struct hrtimer *timer, ktime_t now, ktime_t interval);
-
-/* Forward a hrtimer so it expires after the hrtimer's current now */
-static inline u64 hrtimer_forward_now(struct hrtimer *timer,
-				      ktime_t interval)
-{
-	return hrtimer_forward(timer, timer->base->get_time(), interval);
-}
-
-/* Precise sleep: */
-extern long hrtimer_nanosleep(struct timespec *rqtp,
-			      struct timespec __user *rmtp,
-			      const enum hrtimer_mode mode,
-			      const clockid_t clockid);
-extern long hrtimer_nanosleep_restart(struct restart_block *restart_block);
-
-extern void hrtimer_init_sleeper(struct hrtimer_sleeper *sl,
-				 struct task_struct *tsk);
-
-extern int schedule_hrtimeout_range(ktime_t *expires, unsigned long delta,
-						const enum hrtimer_mode mode);
-extern int schedule_hrtimeout_range_clock(ktime_t *expires,
-		unsigned long delta, const enum hrtimer_mode mode, int clock);
-extern int schedule_hrtimeout(ktime_t *expires, const enum hrtimer_mode mode);
-
-/* Soft interrupt function to run the hrtimer queues: */
-extern void hrtimer_run_queues(void);
-extern void hrtimer_run_pending(void);
-
-/* Bootup initialization: */
-extern void __init hrtimers_init(void);
-
-#if BITS_PER_LONG < 64
-extern u64 ktime_divns(const ktime_t kt, s64 div);
-#else /* BITS_PER_LONG < 64 */
-# define ktime_divns(kt, div)		(u64)((kt).tv64 / (div))
-#endif
-
-/* Show pending timers: */
-extern void sysrq_timer_list_show(void);
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/hsi/Kbuild b/ANDROID_3.4.5/include/linux/hsi/Kbuild
deleted file mode 100644
index 271a770b..00000000
--- a/ANDROID_3.4.5/include/linux/hsi/Kbuild
+++ /dev/null
@@ -1 +0,0 @@
-header-y += hsi_char.h
diff --git a/ANDROID_3.4.5/include/linux/hsi/hsi.h b/ANDROID_3.4.5/include/linux/hsi/hsi.h
deleted file mode 100644
index 56fae865..00000000
--- a/ANDROID_3.4.5/include/linux/hsi/hsi.h
+++ /dev/null
@@ -1,413 +0,0 @@
-/*
- * HSI core header file.
- *
- * Copyright (C) 2010 Nokia Corporation. All rights reserved.
- *
- * Contact: Carlos Chinea <carlos.chinea@nokia.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- */
-
-#ifndef __LINUX_HSI_H__
-#define __LINUX_HSI_H__
-
-#include <linux/device.h>
-#include <linux/mutex.h>
-#include <linux/scatterlist.h>
-#include <linux/list.h>
-#include <linux/module.h>
-#include <linux/notifier.h>
-
-/* HSI message ttype */
-#define HSI_MSG_READ	0
-#define HSI_MSG_WRITE	1
-
-/* HSI configuration values */
-enum {
-	HSI_MODE_STREAM	= 1,
-	HSI_MODE_FRAME,
-};
-
-enum {
-	HSI_FLOW_SYNC,	/* Synchronized flow */
-	HSI_FLOW_PIPE,	/* Pipelined flow */
-};
-
-enum {
-	HSI_ARB_RR,	/* Round-robin arbitration */
-	HSI_ARB_PRIO,	/* Channel priority arbitration */
-};
-
-#define HSI_MAX_CHANNELS	16
-
-/* HSI message status codes */
-enum {
-	HSI_STATUS_COMPLETED,	/* Message transfer is completed */
-	HSI_STATUS_PENDING,	/* Message pending to be read/write (POLL) */
-	HSI_STATUS_PROCEEDING,	/* Message transfer is ongoing */
-	HSI_STATUS_QUEUED,	/* Message waiting to be served */
-	HSI_STATUS_ERROR,	/* Error when message transfer was ongoing */
-};
-
-/* HSI port event codes */
-enum {
-	HSI_EVENT_START_RX,
-	HSI_EVENT_STOP_RX,
-};
-
-/**
- * struct hsi_config - Configuration for RX/TX HSI modules
- * @mode: Bit transmission mode (STREAM or FRAME)
- * @channels: Number of channels to use [1..16]
- * @speed: Max bit transmission speed (Kbit/s)
- * @flow: RX flow type (SYNCHRONIZED or PIPELINE)
- * @arb_mode: Arbitration mode for TX frame (Round robin, priority)
- */
-struct hsi_config {
-	unsigned int	mode;
-	unsigned int	channels;
-	unsigned int	speed;
-	union {
-		unsigned int	flow;		/* RX only */
-		unsigned int	arb_mode;	/* TX only */
-	};
-};
-
-/**
- * struct hsi_board_info - HSI client board info
- * @name: Name for the HSI device
- * @hsi_id: HSI controller id where the client sits
- * @port: Port number in the controller where the client sits
- * @tx_cfg: HSI TX configuration
- * @rx_cfg: HSI RX configuration
- * @platform_data: Platform related data
- * @archdata: Architecture-dependent device data
- */
-struct hsi_board_info {
-	const char		*name;
-	unsigned int		hsi_id;
-	unsigned int		port;
-	struct hsi_config	tx_cfg;
-	struct hsi_config	rx_cfg;
-	void			*platform_data;
-	struct dev_archdata	*archdata;
-};
-
-#ifdef CONFIG_HSI_BOARDINFO
-extern int hsi_register_board_info(struct hsi_board_info const *info,
-							unsigned int len);
-#else
-static inline int hsi_register_board_info(struct hsi_board_info const *info,
-							unsigned int len)
-{
-	return 0;
-}
-#endif /* CONFIG_HSI_BOARDINFO */
-
-/**
- * struct hsi_client - HSI client attached to an HSI port
- * @device: Driver model representation of the device
- * @tx_cfg: HSI TX configuration
- * @rx_cfg: HSI RX configuration
- * @e_handler: Callback for handling port events (RX Wake High/Low)
- * @pclaimed: Keeps tracks if the clients claimed its associated HSI port
- * @nb: Notifier block for port events
- */
-struct hsi_client {
-	struct device		device;
-	struct hsi_config	tx_cfg;
-	struct hsi_config	rx_cfg;
-	/* private: */
-	void			(*ehandler)(struct hsi_client *, unsigned long);
-	unsigned int		pclaimed:1;
-	struct notifier_block	nb;
-};
-
-#define to_hsi_client(dev) container_of(dev, struct hsi_client, device)
-
-static inline void hsi_client_set_drvdata(struct hsi_client *cl, void *data)
-{
-	dev_set_drvdata(&cl->device, data);
-}
-
-static inline void *hsi_client_drvdata(struct hsi_client *cl)
-{
-	return dev_get_drvdata(&cl->device);
-}
-
-int hsi_register_port_event(struct hsi_client *cl,
-			void (*handler)(struct hsi_client *, unsigned long));
-int hsi_unregister_port_event(struct hsi_client *cl);
-
-/**
- * struct hsi_client_driver - Driver associated to an HSI client
- * @driver: Driver model representation of the driver
- */
-struct hsi_client_driver {
-	struct device_driver	driver;
-};
-
-#define to_hsi_client_driver(drv) container_of(drv, struct hsi_client_driver,\
-									driver)
-
-int hsi_register_client_driver(struct hsi_client_driver *drv);
-
-static inline void hsi_unregister_client_driver(struct hsi_client_driver *drv)
-{
-	driver_unregister(&drv->driver);
-}
-
-/**
- * struct hsi_msg - HSI message descriptor
- * @link: Free to use by the current descriptor owner
- * @cl: HSI device client that issues the transfer
- * @sgt: Head of the scatterlist array
- * @context: Client context data associated to the transfer
- * @complete: Transfer completion callback
- * @destructor: Destructor to free resources when flushing
- * @status: Status of the transfer when completed
- * @actual_len: Actual length of data transfered on completion
- * @channel: Channel were to TX/RX the message
- * @ttype: Transfer type (TX if set, RX otherwise)
- * @break_frame: if true HSI will send/receive a break frame. Data buffers are
- *		ignored in the request.
- */
-struct hsi_msg {
-	struct list_head	link;
-	struct hsi_client	*cl;
-	struct sg_table		sgt;
-	void			*context;
-
-	void			(*complete)(struct hsi_msg *msg);
-	void			(*destructor)(struct hsi_msg *msg);
-
-	int			status;
-	unsigned int		actual_len;
-	unsigned int		channel;
-	unsigned int		ttype:1;
-	unsigned int		break_frame:1;
-};
-
-struct hsi_msg *hsi_alloc_msg(unsigned int n_frag, gfp_t flags);
-void hsi_free_msg(struct hsi_msg *msg);
-
-/**
- * struct hsi_port - HSI port device
- * @device: Driver model representation of the device
- * @tx_cfg: Current TX path configuration
- * @rx_cfg: Current RX path configuration
- * @num: Port number
- * @shared: Set when port can be shared by different clients
- * @claimed: Reference count of clients which claimed the port
- * @lock: Serialize port claim
- * @async: Asynchronous transfer callback
- * @setup: Callback to set the HSI client configuration
- * @flush: Callback to clean the HW state and destroy all pending transfers
- * @start_tx: Callback to inform that a client wants to TX data
- * @stop_tx: Callback to inform that a client no longer wishes to TX data
- * @release: Callback to inform that a client no longer uses the port
- * @n_head: Notifier chain for signaling port events to the clients.
- */
-struct hsi_port {
-	struct device			device;
-	struct hsi_config		tx_cfg;
-	struct hsi_config		rx_cfg;
-	unsigned int			num;
-	unsigned int			shared:1;
-	int				claimed;
-	struct mutex			lock;
-	int				(*async)(struct hsi_msg *msg);
-	int				(*setup)(struct hsi_client *cl);
-	int				(*flush)(struct hsi_client *cl);
-	int				(*start_tx)(struct hsi_client *cl);
-	int				(*stop_tx)(struct hsi_client *cl);
-	int				(*release)(struct hsi_client *cl);
-	/* private */
-	struct atomic_notifier_head	n_head;
-};
-
-#define to_hsi_port(dev) container_of(dev, struct hsi_port, device)
-#define hsi_get_port(cl) to_hsi_port((cl)->device.parent)
-
-int hsi_event(struct hsi_port *port, unsigned long event);
-int hsi_claim_port(struct hsi_client *cl, unsigned int share);
-void hsi_release_port(struct hsi_client *cl);
-
-static inline int hsi_port_claimed(struct hsi_client *cl)
-{
-	return cl->pclaimed;
-}
-
-static inline void hsi_port_set_drvdata(struct hsi_port *port, void *data)
-{
-	dev_set_drvdata(&port->device, data);
-}
-
-static inline void *hsi_port_drvdata(struct hsi_port *port)
-{
-	return dev_get_drvdata(&port->device);
-}
-
-/**
- * struct hsi_controller - HSI controller device
- * @device: Driver model representation of the device
- * @owner: Pointer to the module owning the controller
- * @id: HSI controller ID
- * @num_ports: Number of ports in the HSI controller
- * @port: Array of HSI ports
- */
-struct hsi_controller {
-	struct device		device;
-	struct module		*owner;
-	unsigned int		id;
-	unsigned int		num_ports;
-	struct hsi_port		**port;
-};
-
-#define to_hsi_controller(dev) container_of(dev, struct hsi_controller, device)
-
-struct hsi_controller *hsi_alloc_controller(unsigned int n_ports, gfp_t flags);
-void hsi_put_controller(struct hsi_controller *hsi);
-int hsi_register_controller(struct hsi_controller *hsi);
-void hsi_unregister_controller(struct hsi_controller *hsi);
-
-static inline void hsi_controller_set_drvdata(struct hsi_controller *hsi,
-								void *data)
-{
-	dev_set_drvdata(&hsi->device, data);
-}
-
-static inline void *hsi_controller_drvdata(struct hsi_controller *hsi)
-{
-	return dev_get_drvdata(&hsi->device);
-}
-
-static inline struct hsi_port *hsi_find_port_num(struct hsi_controller *hsi,
-							unsigned int num)
-{
-	return (num < hsi->num_ports) ? hsi->port[num] : NULL;
-}
-
-/*
- * API for HSI clients
- */
-int hsi_async(struct hsi_client *cl, struct hsi_msg *msg);
-
-/**
- * hsi_id - Get HSI controller ID associated to a client
- * @cl: Pointer to a HSI client
- *
- * Return the controller id where the client is attached to
- */
-static inline unsigned int hsi_id(struct hsi_client *cl)
-{
-	return	to_hsi_controller(cl->device.parent->parent)->id;
-}
-
-/**
- * hsi_port_id - Gets the port number a client is attached to
- * @cl: Pointer to HSI client
- *
- * Return the port number associated to the client
- */
-static inline unsigned int hsi_port_id(struct hsi_client *cl)
-{
-	return	to_hsi_port(cl->device.parent)->num;
-}
-
-/**
- * hsi_setup - Configure the client's port
- * @cl: Pointer to the HSI client
- *
- * When sharing ports, clients should either relay on a single
- * client setup or have the same setup for all of them.
- *
- * Return -errno on failure, 0 on success
- */
-static inline int hsi_setup(struct hsi_client *cl)
-{
-	if (!hsi_port_claimed(cl))
-		return -EACCES;
-	return	hsi_get_port(cl)->setup(cl);
-}
-
-/**
- * hsi_flush - Flush all pending transactions on the client's port
- * @cl: Pointer to the HSI client
- *
- * This function will destroy all pending hsi_msg in the port and reset
- * the HW port so it is ready to receive and transmit from a clean state.
- *
- * Return -errno on failure, 0 on success
- */
-static inline int hsi_flush(struct hsi_client *cl)
-{
-	if (!hsi_port_claimed(cl))
-		return -EACCES;
-	return hsi_get_port(cl)->flush(cl);
-}
-
-/**
- * hsi_async_read - Submit a read transfer
- * @cl: Pointer to the HSI client
- * @msg: HSI message descriptor of the transfer
- *
- * Return -errno on failure, 0 on success
- */
-static inline int hsi_async_read(struct hsi_client *cl, struct hsi_msg *msg)
-{
-	msg->ttype = HSI_MSG_READ;
-	return hsi_async(cl, msg);
-}
-
-/**
- * hsi_async_write - Submit a write transfer
- * @cl: Pointer to the HSI client
- * @msg: HSI message descriptor of the transfer
- *
- * Return -errno on failure, 0 on success
- */
-static inline int hsi_async_write(struct hsi_client *cl, struct hsi_msg *msg)
-{
-	msg->ttype = HSI_MSG_WRITE;
-	return hsi_async(cl, msg);
-}
-
-/**
- * hsi_start_tx - Signal the port that the client wants to start a TX
- * @cl: Pointer to the HSI client
- *
- * Return -errno on failure, 0 on success
- */
-static inline int hsi_start_tx(struct hsi_client *cl)
-{
-	if (!hsi_port_claimed(cl))
-		return -EACCES;
-	return hsi_get_port(cl)->start_tx(cl);
-}
-
-/**
- * hsi_stop_tx - Signal the port that the client no longer wants to transmit
- * @cl: Pointer to the HSI client
- *
- * Return -errno on failure, 0 on success
- */
-static inline int hsi_stop_tx(struct hsi_client *cl)
-{
-	if (!hsi_port_claimed(cl))
-		return -EACCES;
-	return hsi_get_port(cl)->stop_tx(cl);
-}
-#endif /* __LINUX_HSI_H__ */
diff --git a/ANDROID_3.4.5/include/linux/hsi/hsi_char.h b/ANDROID_3.4.5/include/linux/hsi/hsi_char.h
deleted file mode 100644
index 76160b4f..00000000
--- a/ANDROID_3.4.5/include/linux/hsi/hsi_char.h
+++ /dev/null
@@ -1,63 +0,0 @@
-/*
- * Part of the HSI character device driver.
- *
- * Copyright (C) 2010 Nokia Corporation. All rights reserved.
- *
- * Contact: Andras Domokos <andras.domokos at nokia.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- */
-
-
-#ifndef __HSI_CHAR_H
-#define __HSI_CHAR_H
-
-#define HSI_CHAR_MAGIC		'k'
-#define HSC_IOW(num, dtype)	_IOW(HSI_CHAR_MAGIC, num, dtype)
-#define HSC_IOR(num, dtype)	_IOR(HSI_CHAR_MAGIC, num, dtype)
-#define HSC_IOWR(num, dtype)	_IOWR(HSI_CHAR_MAGIC, num, dtype)
-#define HSC_IO(num)		_IO(HSI_CHAR_MAGIC, num)
-
-#define HSC_RESET		HSC_IO(16)
-#define HSC_SET_PM		HSC_IO(17)
-#define HSC_SEND_BREAK		HSC_IO(18)
-#define HSC_SET_RX		HSC_IOW(19, struct hsc_rx_config)
-#define HSC_GET_RX		HSC_IOW(20, struct hsc_rx_config)
-#define HSC_SET_TX		HSC_IOW(21, struct hsc_tx_config)
-#define HSC_GET_TX		HSC_IOW(22, struct hsc_tx_config)
-
-#define HSC_PM_DISABLE		0
-#define HSC_PM_ENABLE		1
-
-#define HSC_MODE_STREAM		1
-#define HSC_MODE_FRAME		2
-#define HSC_FLOW_SYNC		0
-#define HSC_ARB_RR		0
-#define HSC_ARB_PRIO		1
-
-struct hsc_rx_config {
-	uint32_t mode;
-	uint32_t flow;
-	uint32_t channels;
-};
-
-struct hsc_tx_config {
-	uint32_t mode;
-	uint32_t channels;
-	uint32_t speed;
-	uint32_t arb_mode;
-};
-
-#endif /* __HSI_CHAR_H */
diff --git a/ANDROID_3.4.5/include/linux/htcpld.h b/ANDROID_3.4.5/include/linux/htcpld.h
deleted file mode 100644
index ab3f6cb4..00000000
--- a/ANDROID_3.4.5/include/linux/htcpld.h
+++ /dev/null
@@ -1,24 +0,0 @@
-#ifndef __LINUX_HTCPLD_H
-#define __LINUX_HTCPLD_H
-
-struct htcpld_chip_platform_data {
-	unsigned int addr;
-	unsigned int reset;
-	unsigned int num_gpios;
-	unsigned int gpio_out_base;
-	unsigned int gpio_in_base;
-	unsigned int irq_base;
-	unsigned int num_irqs;
-};
-
-struct htcpld_core_platform_data {
-	unsigned int                      int_reset_gpio_hi;
-	unsigned int                      int_reset_gpio_lo;
-	unsigned int                      i2c_adapter_id;
-
-	struct htcpld_chip_platform_data  *chip;
-	unsigned int                      num_chip;
-};
-
-#endif /* __LINUX_HTCPLD_H */
-
diff --git a/ANDROID_3.4.5/include/linux/htirq.h b/ANDROID_3.4.5/include/linux/htirq.h
deleted file mode 100644
index 70a1dbbf..00000000
--- a/ANDROID_3.4.5/include/linux/htirq.h
+++ /dev/null
@@ -1,24 +0,0 @@
-#ifndef LINUX_HTIRQ_H
-#define LINUX_HTIRQ_H
-
-struct ht_irq_msg {
-	u32	address_lo;	/* low 32 bits of the ht irq message */
-	u32	address_hi;	/* high 32 bits of the it irq message */
-};
-
-/* Helper functions.. */
-void fetch_ht_irq_msg(unsigned int irq, struct ht_irq_msg *msg);
-void write_ht_irq_msg(unsigned int irq, struct ht_irq_msg *msg);
-struct irq_data;
-void mask_ht_irq(struct irq_data *data);
-void unmask_ht_irq(struct irq_data *data);
-
-/* The arch hook for getting things started */
-int arch_setup_ht_irq(unsigned int irq, struct pci_dev *dev);
-
-/* For drivers of buggy hardware */
-typedef void (ht_irq_update_t)(struct pci_dev *dev, int irq,
-			       struct ht_irq_msg *msg);
-int __ht_create_irq(struct pci_dev *dev, int idx, ht_irq_update_t *update);
-
-#endif /* LINUX_HTIRQ_H */
diff --git a/ANDROID_3.4.5/include/linux/huge_mm.h b/ANDROID_3.4.5/include/linux/huge_mm.h
deleted file mode 100644
index c8af7a2e..00000000
--- a/ANDROID_3.4.5/include/linux/huge_mm.h
+++ /dev/null
@@ -1,199 +0,0 @@
-#ifndef _LINUX_HUGE_MM_H
-#define _LINUX_HUGE_MM_H
-
-extern int do_huge_pmd_anonymous_page(struct mm_struct *mm,
-				      struct vm_area_struct *vma,
-				      unsigned long address, pmd_t *pmd,
-				      unsigned int flags);
-extern int copy_huge_pmd(struct mm_struct *dst_mm, struct mm_struct *src_mm,
-			 pmd_t *dst_pmd, pmd_t *src_pmd, unsigned long addr,
-			 struct vm_area_struct *vma);
-extern int do_huge_pmd_wp_page(struct mm_struct *mm, struct vm_area_struct *vma,
-			       unsigned long address, pmd_t *pmd,
-			       pmd_t orig_pmd);
-extern pgtable_t get_pmd_huge_pte(struct mm_struct *mm);
-extern struct page *follow_trans_huge_pmd(struct mm_struct *mm,
-					  unsigned long addr,
-					  pmd_t *pmd,
-					  unsigned int flags);
-extern int zap_huge_pmd(struct mmu_gather *tlb,
-			struct vm_area_struct *vma,
-			pmd_t *pmd, unsigned long addr);
-extern int mincore_huge_pmd(struct vm_area_struct *vma, pmd_t *pmd,
-			unsigned long addr, unsigned long end,
-			unsigned char *vec);
-extern int move_huge_pmd(struct vm_area_struct *vma,
-			 struct vm_area_struct *new_vma,
-			 unsigned long old_addr,
-			 unsigned long new_addr, unsigned long old_end,
-			 pmd_t *old_pmd, pmd_t *new_pmd);
-extern int change_huge_pmd(struct vm_area_struct *vma, pmd_t *pmd,
-			unsigned long addr, pgprot_t newprot);
-
-enum transparent_hugepage_flag {
-	TRANSPARENT_HUGEPAGE_FLAG,
-	TRANSPARENT_HUGEPAGE_REQ_MADV_FLAG,
-	TRANSPARENT_HUGEPAGE_DEFRAG_FLAG,
-	TRANSPARENT_HUGEPAGE_DEFRAG_REQ_MADV_FLAG,
-	TRANSPARENT_HUGEPAGE_DEFRAG_KHUGEPAGED_FLAG,
-#ifdef CONFIG_DEBUG_VM
-	TRANSPARENT_HUGEPAGE_DEBUG_COW_FLAG,
-#endif
-};
-
-enum page_check_address_pmd_flag {
-	PAGE_CHECK_ADDRESS_PMD_FLAG,
-	PAGE_CHECK_ADDRESS_PMD_NOTSPLITTING_FLAG,
-	PAGE_CHECK_ADDRESS_PMD_SPLITTING_FLAG,
-};
-extern pmd_t *page_check_address_pmd(struct page *page,
-				     struct mm_struct *mm,
-				     unsigned long address,
-				     enum page_check_address_pmd_flag flag);
-
-#define HPAGE_PMD_ORDER (HPAGE_PMD_SHIFT-PAGE_SHIFT)
-#define HPAGE_PMD_NR (1<<HPAGE_PMD_ORDER)
-
-#ifdef CONFIG_TRANSPARENT_HUGEPAGE
-#define HPAGE_PMD_SHIFT HPAGE_SHIFT
-#define HPAGE_PMD_MASK HPAGE_MASK
-#define HPAGE_PMD_SIZE HPAGE_SIZE
-
-#define transparent_hugepage_enabled(__vma)				\
-	((transparent_hugepage_flags &					\
-	  (1<<TRANSPARENT_HUGEPAGE_FLAG) ||				\
-	  (transparent_hugepage_flags &					\
-	   (1<<TRANSPARENT_HUGEPAGE_REQ_MADV_FLAG) &&			\
-	   ((__vma)->vm_flags & VM_HUGEPAGE))) &&			\
-	 !((__vma)->vm_flags & VM_NOHUGEPAGE) &&			\
-	 !is_vma_temporary_stack(__vma))
-#define transparent_hugepage_defrag(__vma)				\
-	((transparent_hugepage_flags &					\
-	  (1<<TRANSPARENT_HUGEPAGE_DEFRAG_FLAG)) ||			\
-	 (transparent_hugepage_flags &					\
-	  (1<<TRANSPARENT_HUGEPAGE_DEFRAG_REQ_MADV_FLAG) &&		\
-	  (__vma)->vm_flags & VM_HUGEPAGE))
-#ifdef CONFIG_DEBUG_VM
-#define transparent_hugepage_debug_cow()				\
-	(transparent_hugepage_flags &					\
-	 (1<<TRANSPARENT_HUGEPAGE_DEBUG_COW_FLAG))
-#else /* CONFIG_DEBUG_VM */
-#define transparent_hugepage_debug_cow() 0
-#endif /* CONFIG_DEBUG_VM */
-
-extern unsigned long transparent_hugepage_flags;
-extern int copy_pte_range(struct mm_struct *dst_mm, struct mm_struct *src_mm,
-			  pmd_t *dst_pmd, pmd_t *src_pmd,
-			  struct vm_area_struct *vma,
-			  unsigned long addr, unsigned long end);
-extern int handle_pte_fault(struct mm_struct *mm,
-			    struct vm_area_struct *vma, unsigned long address,
-			    pte_t *pte, pmd_t *pmd, unsigned int flags);
-extern int split_huge_page(struct page *page);
-extern void __split_huge_page_pmd(struct mm_struct *mm, pmd_t *pmd);
-#define split_huge_page_pmd(__mm, __pmd)				\
-	do {								\
-		pmd_t *____pmd = (__pmd);				\
-		if (unlikely(pmd_trans_huge(*____pmd)))			\
-			__split_huge_page_pmd(__mm, ____pmd);		\
-	}  while (0)
-#define wait_split_huge_page(__anon_vma, __pmd)				\
-	do {								\
-		pmd_t *____pmd = (__pmd);				\
-		anon_vma_lock(__anon_vma);				\
-		anon_vma_unlock(__anon_vma);				\
-		BUG_ON(pmd_trans_splitting(*____pmd) ||			\
-		       pmd_trans_huge(*____pmd));			\
-	} while (0)
-#if HPAGE_PMD_ORDER > MAX_ORDER
-#error "hugepages can't be allocated by the buddy allocator"
-#endif
-extern int hugepage_madvise(struct vm_area_struct *vma,
-			    unsigned long *vm_flags, int advice);
-extern void __vma_adjust_trans_huge(struct vm_area_struct *vma,
-				    unsigned long start,
-				    unsigned long end,
-				    long adjust_next);
-extern int __pmd_trans_huge_lock(pmd_t *pmd,
-				 struct vm_area_struct *vma);
-/* mmap_sem must be held on entry */
-static inline int pmd_trans_huge_lock(pmd_t *pmd,
-				      struct vm_area_struct *vma)
-{
-	VM_BUG_ON(!rwsem_is_locked(&vma->vm_mm->mmap_sem));
-	if (pmd_trans_huge(*pmd))
-		return __pmd_trans_huge_lock(pmd, vma);
-	else
-		return 0;
-}
-static inline void vma_adjust_trans_huge(struct vm_area_struct *vma,
-					 unsigned long start,
-					 unsigned long end,
-					 long adjust_next)
-{
-	if (!vma->anon_vma || vma->vm_ops)
-		return;
-	__vma_adjust_trans_huge(vma, start, end, adjust_next);
-}
-static inline int hpage_nr_pages(struct page *page)
-{
-	if (unlikely(PageTransHuge(page)))
-		return HPAGE_PMD_NR;
-	return 1;
-}
-static inline struct page *compound_trans_head(struct page *page)
-{
-	if (PageTail(page)) {
-		struct page *head;
-		head = page->first_page;
-		smp_rmb();
-		/*
-		 * head may be a dangling pointer.
-		 * __split_huge_page_refcount clears PageTail before
-		 * overwriting first_page, so if PageTail is still
-		 * there it means the head pointer isn't dangling.
-		 */
-		if (PageTail(page))
-			return head;
-	}
-	return page;
-}
-#else /* CONFIG_TRANSPARENT_HUGEPAGE */
-#define HPAGE_PMD_SHIFT ({ BUILD_BUG(); 0; })
-#define HPAGE_PMD_MASK ({ BUILD_BUG(); 0; })
-#define HPAGE_PMD_SIZE ({ BUILD_BUG(); 0; })
-
-#define hpage_nr_pages(x) 1
-
-#define transparent_hugepage_enabled(__vma) 0
-
-#define transparent_hugepage_flags 0UL
-static inline int split_huge_page(struct page *page)
-{
-	return 0;
-}
-#define split_huge_page_pmd(__mm, __pmd)	\
-	do { } while (0)
-#define wait_split_huge_page(__anon_vma, __pmd)	\
-	do { } while (0)
-#define compound_trans_head(page) compound_head(page)
-static inline int hugepage_madvise(struct vm_area_struct *vma,
-				   unsigned long *vm_flags, int advice)
-{
-	BUG();
-	return 0;
-}
-static inline void vma_adjust_trans_huge(struct vm_area_struct *vma,
-					 unsigned long start,
-					 unsigned long end,
-					 long adjust_next)
-{
-}
-static inline int pmd_trans_huge_lock(pmd_t *pmd,
-				      struct vm_area_struct *vma)
-{
-	return 0;
-}
-#endif /* CONFIG_TRANSPARENT_HUGEPAGE */
-
-#endif /* _LINUX_HUGE_MM_H */
diff --git a/ANDROID_3.4.5/include/linux/hugetlb.h b/ANDROID_3.4.5/include/linux/hugetlb.h
deleted file mode 100644
index 000837e1..00000000
--- a/ANDROID_3.4.5/include/linux/hugetlb.h
+++ /dev/null
@@ -1,317 +0,0 @@
-#ifndef _LINUX_HUGETLB_H
-#define _LINUX_HUGETLB_H
-
-#include <linux/mm_types.h>
-#include <linux/fs.h>
-#include <linux/hugetlb_inline.h>
-
-struct ctl_table;
-struct user_struct;
-
-#ifdef CONFIG_HUGETLB_PAGE
-
-#include <linux/mempolicy.h>
-#include <linux/shm.h>
-#include <asm/tlbflush.h>
-
-struct hugepage_subpool {
-	spinlock_t lock;
-	long count;
-	long max_hpages, used_hpages;
-};
-
-struct hugepage_subpool *hugepage_new_subpool(long nr_blocks);
-void hugepage_put_subpool(struct hugepage_subpool *spool);
-
-int PageHuge(struct page *page);
-
-void reset_vma_resv_huge_pages(struct vm_area_struct *vma);
-int hugetlb_sysctl_handler(struct ctl_table *, int, void __user *, size_t *, loff_t *);
-int hugetlb_overcommit_handler(struct ctl_table *, int, void __user *, size_t *, loff_t *);
-int hugetlb_treat_movable_handler(struct ctl_table *, int, void __user *, size_t *, loff_t *);
-
-#ifdef CONFIG_NUMA
-int hugetlb_mempolicy_sysctl_handler(struct ctl_table *, int,
-					void __user *, size_t *, loff_t *);
-#endif
-
-int copy_hugetlb_page_range(struct mm_struct *, struct mm_struct *, struct vm_area_struct *);
-int follow_hugetlb_page(struct mm_struct *, struct vm_area_struct *,
-			struct page **, struct vm_area_struct **,
-			unsigned long *, int *, int, unsigned int flags);
-void unmap_hugepage_range(struct vm_area_struct *,
-			unsigned long, unsigned long, struct page *);
-void __unmap_hugepage_range(struct vm_area_struct *,
-			unsigned long, unsigned long, struct page *);
-int hugetlb_prefault(struct address_space *, struct vm_area_struct *);
-void hugetlb_report_meminfo(struct seq_file *);
-int hugetlb_report_node_meminfo(int, char *);
-unsigned long hugetlb_total_pages(void);
-int hugetlb_fault(struct mm_struct *mm, struct vm_area_struct *vma,
-			unsigned long address, unsigned int flags);
-int hugetlb_reserve_pages(struct inode *inode, long from, long to,
-						struct vm_area_struct *vma,
-						vm_flags_t vm_flags);
-void hugetlb_unreserve_pages(struct inode *inode, long offset, long freed);
-int dequeue_hwpoisoned_huge_page(struct page *page);
-void copy_huge_page(struct page *dst, struct page *src);
-
-extern unsigned long hugepages_treat_as_movable;
-extern const unsigned long hugetlb_zero, hugetlb_infinity;
-extern int sysctl_hugetlb_shm_group;
-extern struct list_head huge_boot_pages;
-
-/* arch callbacks */
-
-pte_t *huge_pte_alloc(struct mm_struct *mm,
-			unsigned long addr, unsigned long sz);
-pte_t *huge_pte_offset(struct mm_struct *mm, unsigned long addr);
-int huge_pmd_unshare(struct mm_struct *mm, unsigned long *addr, pte_t *ptep);
-struct page *follow_huge_addr(struct mm_struct *mm, unsigned long address,
-			      int write);
-struct page *follow_huge_pmd(struct mm_struct *mm, unsigned long address,
-				pmd_t *pmd, int write);
-struct page *follow_huge_pud(struct mm_struct *mm, unsigned long address,
-				pud_t *pud, int write);
-int pmd_huge(pmd_t pmd);
-int pud_huge(pud_t pmd);
-void hugetlb_change_protection(struct vm_area_struct *vma,
-		unsigned long address, unsigned long end, pgprot_t newprot);
-
-#else /* !CONFIG_HUGETLB_PAGE */
-
-static inline int PageHuge(struct page *page)
-{
-	return 0;
-}
-
-static inline void reset_vma_resv_huge_pages(struct vm_area_struct *vma)
-{
-}
-
-static inline unsigned long hugetlb_total_pages(void)
-{
-	return 0;
-}
-
-#define follow_hugetlb_page(m,v,p,vs,a,b,i,w)	({ BUG(); 0; })
-#define follow_huge_addr(mm, addr, write)	ERR_PTR(-EINVAL)
-#define copy_hugetlb_page_range(src, dst, vma)	({ BUG(); 0; })
-#define hugetlb_prefault(mapping, vma)		({ BUG(); 0; })
-#define unmap_hugepage_range(vma, start, end, page)	BUG()
-static inline void hugetlb_report_meminfo(struct seq_file *m)
-{
-}
-#define hugetlb_report_node_meminfo(n, buf)	0
-#define follow_huge_pmd(mm, addr, pmd, write)	NULL
-#define follow_huge_pud(mm, addr, pud, write)	NULL
-#define prepare_hugepage_range(file, addr, len)	(-EINVAL)
-#define pmd_huge(x)	0
-#define pud_huge(x)	0
-#define is_hugepage_only_range(mm, addr, len)	0
-#define hugetlb_free_pgd_range(tlb, addr, end, floor, ceiling) ({BUG(); 0; })
-#define hugetlb_fault(mm, vma, addr, flags)	({ BUG(); 0; })
-#define huge_pte_offset(mm, address)	0
-#define dequeue_hwpoisoned_huge_page(page)	0
-static inline void copy_huge_page(struct page *dst, struct page *src)
-{
-}
-
-#define hugetlb_change_protection(vma, address, end, newprot)
-
-#endif /* !CONFIG_HUGETLB_PAGE */
-
-#define HUGETLB_ANON_FILE "anon_hugepage"
-
-enum {
-	/*
-	 * The file will be used as an shm file so shmfs accounting rules
-	 * apply
-	 */
-	HUGETLB_SHMFS_INODE     = 1,
-	/*
-	 * The file is being created on the internal vfs mount and shmfs
-	 * accounting rules do not apply
-	 */
-	HUGETLB_ANONHUGE_INODE  = 2,
-};
-
-#ifdef CONFIG_HUGETLBFS
-struct hugetlbfs_sb_info {
-	long	max_inodes;   /* inodes allowed */
-	long	free_inodes;  /* inodes free */
-	spinlock_t	stat_lock;
-	struct hstate *hstate;
-	struct hugepage_subpool *spool;
-};
-
-static inline struct hugetlbfs_sb_info *HUGETLBFS_SB(struct super_block *sb)
-{
-	return sb->s_fs_info;
-}
-
-extern const struct file_operations hugetlbfs_file_operations;
-extern const struct vm_operations_struct hugetlb_vm_ops;
-struct file *hugetlb_file_setup(const char *name, unsigned long addr,
-				size_t size, vm_flags_t acct,
-				struct user_struct **user, int creat_flags);
-
-static inline int is_file_hugepages(struct file *file)
-{
-	if (file->f_op == &hugetlbfs_file_operations)
-		return 1;
-	if (is_file_shm_hugepages(file))
-		return 1;
-
-	return 0;
-}
-
-#else /* !CONFIG_HUGETLBFS */
-
-#define is_file_hugepages(file)			0
-static inline struct file *
-hugetlb_file_setup(const char *name, unsigned long addr, size_t size,
-		vm_flags_t acctflag, struct user_struct **user, int creat_flags)
-{
-	return ERR_PTR(-ENOSYS);
-}
-
-#endif /* !CONFIG_HUGETLBFS */
-
-#ifdef HAVE_ARCH_HUGETLB_UNMAPPED_AREA
-unsigned long hugetlb_get_unmapped_area(struct file *file, unsigned long addr,
-					unsigned long len, unsigned long pgoff,
-					unsigned long flags);
-#endif /* HAVE_ARCH_HUGETLB_UNMAPPED_AREA */
-
-#ifdef CONFIG_HUGETLB_PAGE
-
-#define HSTATE_NAME_LEN 32
-/* Defines one hugetlb page size */
-struct hstate {
-	int next_nid_to_alloc;
-	int next_nid_to_free;
-	unsigned int order;
-	unsigned long mask;
-	unsigned long max_huge_pages;
-	unsigned long nr_huge_pages;
-	unsigned long free_huge_pages;
-	unsigned long resv_huge_pages;
-	unsigned long surplus_huge_pages;
-	unsigned long nr_overcommit_huge_pages;
-	struct list_head hugepage_freelists[MAX_NUMNODES];
-	unsigned int nr_huge_pages_node[MAX_NUMNODES];
-	unsigned int free_huge_pages_node[MAX_NUMNODES];
-	unsigned int surplus_huge_pages_node[MAX_NUMNODES];
-	char name[HSTATE_NAME_LEN];
-};
-
-struct huge_bootmem_page {
-	struct list_head list;
-	struct hstate *hstate;
-#ifdef CONFIG_HIGHMEM
-	phys_addr_t phys;
-#endif
-};
-
-struct page *alloc_huge_page_node(struct hstate *h, int nid);
-
-/* arch callback */
-int __init alloc_bootmem_huge_page(struct hstate *h);
-
-void __init hugetlb_add_hstate(unsigned order);
-struct hstate *size_to_hstate(unsigned long size);
-
-#ifndef HUGE_MAX_HSTATE
-#define HUGE_MAX_HSTATE 1
-#endif
-
-extern struct hstate hstates[HUGE_MAX_HSTATE];
-extern unsigned int default_hstate_idx;
-
-#define default_hstate (hstates[default_hstate_idx])
-
-static inline struct hstate *hstate_inode(struct inode *i)
-{
-	struct hugetlbfs_sb_info *hsb;
-	hsb = HUGETLBFS_SB(i->i_sb);
-	return hsb->hstate;
-}
-
-static inline struct hstate *hstate_file(struct file *f)
-{
-	return hstate_inode(f->f_dentry->d_inode);
-}
-
-static inline struct hstate *hstate_vma(struct vm_area_struct *vma)
-{
-	return hstate_file(vma->vm_file);
-}
-
-static inline unsigned long huge_page_size(struct hstate *h)
-{
-	return (unsigned long)PAGE_SIZE << h->order;
-}
-
-extern unsigned long vma_kernel_pagesize(struct vm_area_struct *vma);
-
-extern unsigned long vma_mmu_pagesize(struct vm_area_struct *vma);
-
-static inline unsigned long huge_page_mask(struct hstate *h)
-{
-	return h->mask;
-}
-
-static inline unsigned int huge_page_order(struct hstate *h)
-{
-	return h->order;
-}
-
-static inline unsigned huge_page_shift(struct hstate *h)
-{
-	return h->order + PAGE_SHIFT;
-}
-
-static inline unsigned int pages_per_huge_page(struct hstate *h)
-{
-	return 1 << h->order;
-}
-
-static inline unsigned int blocks_per_huge_page(struct hstate *h)
-{
-	return huge_page_size(h) / 512;
-}
-
-#include <asm/hugetlb.h>
-
-static inline struct hstate *page_hstate(struct page *page)
-{
-	return size_to_hstate(PAGE_SIZE << compound_order(page));
-}
-
-static inline unsigned hstate_index_to_shift(unsigned index)
-{
-	return hstates[index].order + PAGE_SHIFT;
-}
-
-#else
-struct hstate {};
-#define alloc_huge_page_node(h, nid) NULL
-#define alloc_bootmem_huge_page(h) NULL
-#define hstate_file(f) NULL
-#define hstate_vma(v) NULL
-#define hstate_inode(i) NULL
-#define huge_page_size(h) PAGE_SIZE
-#define huge_page_mask(h) PAGE_MASK
-#define vma_kernel_pagesize(v) PAGE_SIZE
-#define vma_mmu_pagesize(v) PAGE_SIZE
-#define huge_page_order(h) 0
-#define huge_page_shift(h) PAGE_SHIFT
-static inline unsigned int pages_per_huge_page(struct hstate *h)
-{
-	return 1;
-}
-#define hstate_index_to_shift(index) 0
-#endif
-
-#endif /* _LINUX_HUGETLB_H */
diff --git a/ANDROID_3.4.5/include/linux/hugetlb_inline.h b/ANDROID_3.4.5/include/linux/hugetlb_inline.h
deleted file mode 100644
index 2bb681fb..00000000
--- a/ANDROID_3.4.5/include/linux/hugetlb_inline.h
+++ /dev/null
@@ -1,22 +0,0 @@
-#ifndef _LINUX_HUGETLB_INLINE_H
-#define _LINUX_HUGETLB_INLINE_H
-
-#ifdef CONFIG_HUGETLB_PAGE
-
-#include <linux/mm.h>
-
-static inline int is_vm_hugetlb_page(struct vm_area_struct *vma)
-{
-	return !!(vma->vm_flags & VM_HUGETLB);
-}
-
-#else
-
-static inline int is_vm_hugetlb_page(struct vm_area_struct *vma)
-{
-	return 0;
-}
-
-#endif
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/hw_breakpoint.h b/ANDROID_3.4.5/include/linux/hw_breakpoint.h
deleted file mode 100644
index 6ae9c631..00000000
--- a/ANDROID_3.4.5/include/linux/hw_breakpoint.h
+++ /dev/null
@@ -1,156 +0,0 @@
-#ifndef _LINUX_HW_BREAKPOINT_H
-#define _LINUX_HW_BREAKPOINT_H
-
-enum {
-	HW_BREAKPOINT_LEN_1 = 1,
-	HW_BREAKPOINT_LEN_2 = 2,
-	HW_BREAKPOINT_LEN_4 = 4,
-	HW_BREAKPOINT_LEN_8 = 8,
-};
-
-enum {
-	HW_BREAKPOINT_EMPTY	= 0,
-	HW_BREAKPOINT_R		= 1,
-	HW_BREAKPOINT_W		= 2,
-	HW_BREAKPOINT_RW	= HW_BREAKPOINT_R | HW_BREAKPOINT_W,
-	HW_BREAKPOINT_X		= 4,
-	HW_BREAKPOINT_INVALID   = HW_BREAKPOINT_RW | HW_BREAKPOINT_X,
-};
-
-enum bp_type_idx {
-	TYPE_INST 	= 0,
-#ifdef CONFIG_HAVE_MIXED_BREAKPOINTS_REGS
-	TYPE_DATA	= 0,
-#else
-	TYPE_DATA	= 1,
-#endif
-	TYPE_MAX
-};
-
-#ifdef __KERNEL__
-
-#include <linux/perf_event.h>
-
-#ifdef CONFIG_HAVE_HW_BREAKPOINT
-
-extern int __init init_hw_breakpoint(void);
-
-static inline void hw_breakpoint_init(struct perf_event_attr *attr)
-{
-	memset(attr, 0, sizeof(*attr));
-
-	attr->type = PERF_TYPE_BREAKPOINT;
-	attr->size = sizeof(*attr);
-	/*
-	 * As it's for in-kernel or ptrace use, we want it to be pinned
-	 * and to call its callback every hits.
-	 */
-	attr->pinned = 1;
-	attr->sample_period = 1;
-}
-
-static inline void ptrace_breakpoint_init(struct perf_event_attr *attr)
-{
-	hw_breakpoint_init(attr);
-	attr->exclude_kernel = 1;
-}
-
-static inline unsigned long hw_breakpoint_addr(struct perf_event *bp)
-{
-	return bp->attr.bp_addr;
-}
-
-static inline int hw_breakpoint_type(struct perf_event *bp)
-{
-	return bp->attr.bp_type;
-}
-
-static inline unsigned long hw_breakpoint_len(struct perf_event *bp)
-{
-	return bp->attr.bp_len;
-}
-
-extern struct perf_event *
-register_user_hw_breakpoint(struct perf_event_attr *attr,
-			    perf_overflow_handler_t triggered,
-			    void *context,
-			    struct task_struct *tsk);
-
-/* FIXME: only change from the attr, and don't unregister */
-extern int
-modify_user_hw_breakpoint(struct perf_event *bp, struct perf_event_attr *attr);
-
-/*
- * Kernel breakpoints are not associated with any particular thread.
- */
-extern struct perf_event *
-register_wide_hw_breakpoint_cpu(struct perf_event_attr *attr,
-				perf_overflow_handler_t	triggered,
-				void *context,
-				int cpu);
-
-extern struct perf_event * __percpu *
-register_wide_hw_breakpoint(struct perf_event_attr *attr,
-			    perf_overflow_handler_t triggered,
-			    void *context);
-
-extern int register_perf_hw_breakpoint(struct perf_event *bp);
-extern int __register_perf_hw_breakpoint(struct perf_event *bp);
-extern void unregister_hw_breakpoint(struct perf_event *bp);
-extern void unregister_wide_hw_breakpoint(struct perf_event * __percpu *cpu_events);
-
-extern int dbg_reserve_bp_slot(struct perf_event *bp);
-extern int dbg_release_bp_slot(struct perf_event *bp);
-extern int reserve_bp_slot(struct perf_event *bp);
-extern void release_bp_slot(struct perf_event *bp);
-
-extern void flush_ptrace_hw_breakpoint(struct task_struct *tsk);
-
-static inline struct arch_hw_breakpoint *counter_arch_bp(struct perf_event *bp)
-{
-	return &bp->hw.info;
-}
-
-#else /* !CONFIG_HAVE_HW_BREAKPOINT */
-
-static inline int __init init_hw_breakpoint(void) { return 0; }
-
-static inline struct perf_event *
-register_user_hw_breakpoint(struct perf_event_attr *attr,
-			    perf_overflow_handler_t triggered,
-			    void *context,
-			    struct task_struct *tsk)	{ return NULL; }
-static inline int
-modify_user_hw_breakpoint(struct perf_event *bp,
-			  struct perf_event_attr *attr)	{ return -ENOSYS; }
-static inline struct perf_event *
-register_wide_hw_breakpoint_cpu(struct perf_event_attr *attr,
-				perf_overflow_handler_t	 triggered,
-				void *context,
-				int cpu)		{ return NULL; }
-static inline struct perf_event * __percpu *
-register_wide_hw_breakpoint(struct perf_event_attr *attr,
-			    perf_overflow_handler_t triggered,
-			    void *context)		{ return NULL; }
-static inline int
-register_perf_hw_breakpoint(struct perf_event *bp)	{ return -ENOSYS; }
-static inline int
-__register_perf_hw_breakpoint(struct perf_event *bp) 	{ return -ENOSYS; }
-static inline void unregister_hw_breakpoint(struct perf_event *bp)	{ }
-static inline void
-unregister_wide_hw_breakpoint(struct perf_event * __percpu *cpu_events)	{ }
-static inline int
-reserve_bp_slot(struct perf_event *bp)			{return -ENOSYS; }
-static inline void release_bp_slot(struct perf_event *bp) 		{ }
-
-static inline void flush_ptrace_hw_breakpoint(struct task_struct *tsk)	{ }
-
-static inline struct arch_hw_breakpoint *counter_arch_bp(struct perf_event *bp)
-{
-	return NULL;
-}
-
-#endif /* CONFIG_HAVE_HW_BREAKPOINT */
-#endif /* __KERNEL__ */
-
-#endif /* _LINUX_HW_BREAKPOINT_H */
diff --git a/ANDROID_3.4.5/include/linux/hw_random.h b/ANDROID_3.4.5/include/linux/hw_random.h
deleted file mode 100644
index b4b0eef5..00000000
--- a/ANDROID_3.4.5/include/linux/hw_random.h
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
-	Hardware Random Number Generator
-
-	Please read Documentation/hw_random.txt for details on use.
-
-	----------------------------------------------------------
-	This software may be used and distributed according to the terms
-        of the GNU General Public License, incorporated herein by reference.
-
- */
-
-#ifndef LINUX_HWRANDOM_H_
-#define LINUX_HWRANDOM_H_
-
-#include <linux/types.h>
-#include <linux/list.h>
-
-/**
- * struct hwrng - Hardware Random Number Generator driver
- * @name:		Unique RNG name.
- * @init:		Initialization callback (can be NULL).
- * @cleanup:		Cleanup callback (can be NULL).
- * @data_present:	Callback to determine if data is available
- *			on the RNG. If NULL, it is assumed that
- *			there is always data available.  *OBSOLETE*
- * @data_read:		Read data from the RNG device.
- *			Returns the number of lower random bytes in "data".
- *			Must not be NULL.    *OBSOLETE*
- * @read:		New API. drivers can fill up to max bytes of data
- *			into the buffer. The buffer is aligned for any type.
- * @priv:		Private data, for use by the RNG driver.
- */
-struct hwrng {
-	const char *name;
-	int (*init)(struct hwrng *rng);
-	void (*cleanup)(struct hwrng *rng);
-	int (*data_present)(struct hwrng *rng, int wait);
-	int (*data_read)(struct hwrng *rng, u32 *data);
-	int (*read)(struct hwrng *rng, void *data, size_t max, bool wait);
-	unsigned long priv;
-
-	/* internal. */
-	struct list_head list;
-};
-
-/** Register a new Hardware Random Number Generator driver. */
-extern int hwrng_register(struct hwrng *rng);
-/** Unregister a Hardware Random Number Generator driver. */
-extern void hwrng_unregister(struct hwrng *rng);
-
-#endif /* LINUX_HWRANDOM_H_ */
diff --git a/ANDROID_3.4.5/include/linux/hwmon-sysfs.h b/ANDROID_3.4.5/include/linux/hwmon-sysfs.h
deleted file mode 100644
index 1c7b89ae..00000000
--- a/ANDROID_3.4.5/include/linux/hwmon-sysfs.h
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- *  hwmon-sysfs.h - hardware monitoring chip driver sysfs defines
- *
- *  Copyright (C) 2005 Yani Ioannou <yani.ioannou@gmail.com>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-#ifndef _LINUX_HWMON_SYSFS_H
-#define _LINUX_HWMON_SYSFS_H
-
-#include <linux/device.h>
-
-struct sensor_device_attribute{
-	struct device_attribute dev_attr;
-	int index;
-};
-#define to_sensor_dev_attr(_dev_attr) \
-	container_of(_dev_attr, struct sensor_device_attribute, dev_attr)
-
-#define SENSOR_ATTR(_name, _mode, _show, _store, _index)	\
-	{ .dev_attr = __ATTR(_name, _mode, _show, _store),	\
-	  .index = _index }
-
-#define SENSOR_DEVICE_ATTR(_name, _mode, _show, _store, _index)	\
-struct sensor_device_attribute sensor_dev_attr_##_name		\
-	= SENSOR_ATTR(_name, _mode, _show, _store, _index)
-
-struct sensor_device_attribute_2 {
-	struct device_attribute dev_attr;
-	u8 index;
-	u8 nr;
-};
-#define to_sensor_dev_attr_2(_dev_attr) \
-	container_of(_dev_attr, struct sensor_device_attribute_2, dev_attr)
-
-#define SENSOR_ATTR_2(_name, _mode, _show, _store, _nr, _index)	\
-	{ .dev_attr = __ATTR(_name, _mode, _show, _store),	\
-	  .index = _index,					\
-	  .nr = _nr }
-
-#define SENSOR_DEVICE_ATTR_2(_name,_mode,_show,_store,_nr,_index)	\
-struct sensor_device_attribute_2 sensor_dev_attr_##_name		\
-	= SENSOR_ATTR_2(_name, _mode, _show, _store, _nr, _index)
-
-#endif /* _LINUX_HWMON_SYSFS_H */
diff --git a/ANDROID_3.4.5/include/linux/hwmon-vid.h b/ANDROID_3.4.5/include/linux/hwmon-vid.h
deleted file mode 100644
index f346e4d5..00000000
--- a/ANDROID_3.4.5/include/linux/hwmon-vid.h
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
-    hwmon-vid.h - VID/VRM/VRD voltage conversions
-
-    Originally part of lm_sensors
-    Copyright (c) 2002 Mark D. Studebaker <mdsxyz123@yahoo.com>
-    With assistance from Trent Piepho <xyzzy@speakeasy.org>
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#ifndef _LINUX_HWMON_VID_H
-#define _LINUX_HWMON_VID_H
-
-int vid_from_reg(int val, u8 vrm);
-u8 vid_which_vrm(void);
-
-/* vrm is the VRM/VRD document version multiplied by 10.
-   val is in mV to avoid floating point in the kernel.
-   Returned value is the 4-, 5- or 6-bit VID code.
-   Note that only VRM 9.x is supported for now. */
-static inline int vid_to_reg(int val, u8 vrm)
-{
-	switch (vrm) {
-	case 91:		/* VRM 9.1 */
-	case 90:		/* VRM 9.0 */
-		return ((val >= 1100) && (val <= 1850) ?
-			((18499 - val * 10) / 25 + 5) / 10 : -1);
-	default:
-		return -1;
-	}
-}
-
-#endif /* _LINUX_HWMON_VID_H */
diff --git a/ANDROID_3.4.5/include/linux/hwmon.h b/ANDROID_3.4.5/include/linux/hwmon.h
deleted file mode 100644
index 82b29ae6..00000000
--- a/ANDROID_3.4.5/include/linux/hwmon.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
-    hwmon.h - part of lm_sensors, Linux kernel modules for hardware monitoring
-
-    This file declares helper functions for the sysfs class "hwmon",
-    for use by sensors drivers.
-
-    Copyright (C) 2005 Mark M. Hoffman <mhoffman@lightlink.com>
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; version 2 of the License.
-*/
-
-#ifndef _HWMON_H_
-#define _HWMON_H_
-
-struct device;
-
-struct device *hwmon_device_register(struct device *dev);
-
-void hwmon_device_unregister(struct device *dev);
-
-/* Scale user input to sensible values */
-static inline int SENSORS_LIMIT(long value, long low, long high)
-{
-	if (value < low)
-		return low;
-	else if (value > high)
-		return high;
-	else
-		return value;
-}
-
-#endif
-
diff --git a/ANDROID_3.4.5/include/linux/hwspinlock.h b/ANDROID_3.4.5/include/linux/hwspinlock.h
deleted file mode 100644
index 3343298e..00000000
--- a/ANDROID_3.4.5/include/linux/hwspinlock.h
+++ /dev/null
@@ -1,313 +0,0 @@
-/*
- * Hardware spinlock public header
- *
- * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com
- *
- * Contact: Ohad Ben-Cohen <ohad@wizery.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#ifndef __LINUX_HWSPINLOCK_H
-#define __LINUX_HWSPINLOCK_H
-
-#include <linux/err.h>
-#include <linux/sched.h>
-
-/* hwspinlock mode argument */
-#define HWLOCK_IRQSTATE	0x01	/* Disable interrupts, save state */
-#define HWLOCK_IRQ	0x02	/* Disable interrupts, don't save state */
-
-struct device;
-struct hwspinlock;
-struct hwspinlock_device;
-struct hwspinlock_ops;
-
-/**
- * struct hwspinlock_pdata - platform data for hwspinlock drivers
- * @base_id: base id for this hwspinlock device
- *
- * hwspinlock devices provide system-wide hardware locks that are used
- * by remote processors that have no other way to achieve synchronization.
- *
- * To achieve that, each physical lock must have a system-wide id number
- * that is agreed upon, otherwise remote processors can't possibly assume
- * they're using the same hardware lock.
- *
- * Usually boards have a single hwspinlock device, which provides several
- * hwspinlocks, and in this case, they can be trivially numbered 0 to
- * (num-of-locks - 1).
- *
- * In case boards have several hwspinlocks devices, a different base id
- * should be used for each hwspinlock device (they can't all use 0 as
- * a starting id!).
- *
- * This platform data structure should be used to provide the base id
- * for each device (which is trivially 0 when only a single hwspinlock
- * device exists). It can be shared between different platforms, hence
- * its location.
- */
-struct hwspinlock_pdata {
-	int base_id;
-};
-
-#if defined(CONFIG_HWSPINLOCK) || defined(CONFIG_HWSPINLOCK_MODULE)
-
-int hwspin_lock_register(struct hwspinlock_device *bank, struct device *dev,
-		const struct hwspinlock_ops *ops, int base_id, int num_locks);
-int hwspin_lock_unregister(struct hwspinlock_device *bank);
-struct hwspinlock *hwspin_lock_request(void);
-struct hwspinlock *hwspin_lock_request_specific(unsigned int id);
-int hwspin_lock_free(struct hwspinlock *hwlock);
-int hwspin_lock_get_id(struct hwspinlock *hwlock);
-int __hwspin_lock_timeout(struct hwspinlock *, unsigned int, int,
-							unsigned long *);
-int __hwspin_trylock(struct hwspinlock *, int, unsigned long *);
-void __hwspin_unlock(struct hwspinlock *, int, unsigned long *);
-
-#else /* !CONFIG_HWSPINLOCK */
-
-/*
- * We don't want these functions to fail if CONFIG_HWSPINLOCK is not
- * enabled. We prefer to silently succeed in this case, and let the
- * code path get compiled away. This way, if CONFIG_HWSPINLOCK is not
- * required on a given setup, users will still work.
- *
- * The only exception is hwspin_lock_register/hwspin_lock_unregister, with which
- * we _do_ want users to fail (no point in registering hwspinlock instances if
- * the framework is not available).
- *
- * Note: ERR_PTR(-ENODEV) will still be considered a success for NULL-checking
- * users. Others, which care, can still check this with IS_ERR.
- */
-static inline struct hwspinlock *hwspin_lock_request(void)
-{
-	return ERR_PTR(-ENODEV);
-}
-
-static inline struct hwspinlock *hwspin_lock_request_specific(unsigned int id)
-{
-	return ERR_PTR(-ENODEV);
-}
-
-static inline int hwspin_lock_free(struct hwspinlock *hwlock)
-{
-	return 0;
-}
-
-static inline
-int __hwspin_lock_timeout(struct hwspinlock *hwlock, unsigned int to,
-					int mode, unsigned long *flags)
-{
-	return 0;
-}
-
-static inline
-int __hwspin_trylock(struct hwspinlock *hwlock, int mode, unsigned long *flags)
-{
-	return 0;
-}
-
-static inline
-void __hwspin_unlock(struct hwspinlock *hwlock, int mode, unsigned long *flags)
-{
-}
-
-static inline int hwspin_lock_get_id(struct hwspinlock *hwlock)
-{
-	return 0;
-}
-
-#endif /* !CONFIG_HWSPINLOCK */
-
-/**
- * hwspin_trylock_irqsave() - try to lock an hwspinlock, disable interrupts
- * @hwlock: an hwspinlock which we want to trylock
- * @flags: a pointer to where the caller's interrupt state will be saved at
- *
- * This function attempts to lock the underlying hwspinlock, and will
- * immediately fail if the hwspinlock is already locked.
- *
- * Upon a successful return from this function, preemption and local
- * interrupts are disabled (previous interrupts state is saved at @flags),
- * so the caller must not sleep, and is advised to release the hwspinlock
- * as soon as possible.
- *
- * Returns 0 if we successfully locked the hwspinlock, -EBUSY if
- * the hwspinlock was already taken, and -EINVAL if @hwlock is invalid.
- */
-static inline
-int hwspin_trylock_irqsave(struct hwspinlock *hwlock, unsigned long *flags)
-{
-	return __hwspin_trylock(hwlock, HWLOCK_IRQSTATE, flags);
-}
-
-/**
- * hwspin_trylock_irq() - try to lock an hwspinlock, disable interrupts
- * @hwlock: an hwspinlock which we want to trylock
- *
- * This function attempts to lock the underlying hwspinlock, and will
- * immediately fail if the hwspinlock is already locked.
- *
- * Upon a successful return from this function, preemption and local
- * interrupts are disabled, so the caller must not sleep, and is advised
- * to release the hwspinlock as soon as possible.
- *
- * Returns 0 if we successfully locked the hwspinlock, -EBUSY if
- * the hwspinlock was already taken, and -EINVAL if @hwlock is invalid.
- */
-static inline int hwspin_trylock_irq(struct hwspinlock *hwlock)
-{
-	return __hwspin_trylock(hwlock, HWLOCK_IRQ, NULL);
-}
-
-/**
- * hwspin_trylock() - attempt to lock a specific hwspinlock
- * @hwlock: an hwspinlock which we want to trylock
- *
- * This function attempts to lock an hwspinlock, and will immediately fail
- * if the hwspinlock is already taken.
- *
- * Upon a successful return from this function, preemption is disabled,
- * so the caller must not sleep, and is advised to release the hwspinlock
- * as soon as possible. This is required in order to minimize remote cores
- * polling on the hardware interconnect.
- *
- * Returns 0 if we successfully locked the hwspinlock, -EBUSY if
- * the hwspinlock was already taken, and -EINVAL if @hwlock is invalid.
- */
-static inline int hwspin_trylock(struct hwspinlock *hwlock)
-{
-	return __hwspin_trylock(hwlock, 0, NULL);
-}
-
-/**
- * hwspin_lock_timeout_irqsave() - lock hwspinlock, with timeout, disable irqs
- * @hwlock: the hwspinlock to be locked
- * @to: timeout value in msecs
- * @flags: a pointer to where the caller's interrupt state will be saved at
- *
- * This function locks the underlying @hwlock. If the @hwlock
- * is already taken, the function will busy loop waiting for it to
- * be released, but give up when @timeout msecs have elapsed.
- *
- * Upon a successful return from this function, preemption and local interrupts
- * are disabled (plus previous interrupt state is saved), so the caller must
- * not sleep, and is advised to release the hwspinlock as soon as possible.
- *
- * Returns 0 when the @hwlock was successfully taken, and an appropriate
- * error code otherwise (most notably an -ETIMEDOUT if the @hwlock is still
- * busy after @timeout msecs). The function will never sleep.
- */
-static inline int hwspin_lock_timeout_irqsave(struct hwspinlock *hwlock,
-				unsigned int to, unsigned long *flags)
-{
-	return __hwspin_lock_timeout(hwlock, to, HWLOCK_IRQSTATE, flags);
-}
-
-/**
- * hwspin_lock_timeout_irq() - lock hwspinlock, with timeout, disable irqs
- * @hwlock: the hwspinlock to be locked
- * @to: timeout value in msecs
- *
- * This function locks the underlying @hwlock. If the @hwlock
- * is already taken, the function will busy loop waiting for it to
- * be released, but give up when @timeout msecs have elapsed.
- *
- * Upon a successful return from this function, preemption and local interrupts
- * are disabled so the caller must not sleep, and is advised to release the
- * hwspinlock as soon as possible.
- *
- * Returns 0 when the @hwlock was successfully taken, and an appropriate
- * error code otherwise (most notably an -ETIMEDOUT if the @hwlock is still
- * busy after @timeout msecs). The function will never sleep.
- */
-static inline
-int hwspin_lock_timeout_irq(struct hwspinlock *hwlock, unsigned int to)
-{
-	return __hwspin_lock_timeout(hwlock, to, HWLOCK_IRQ, NULL);
-}
-
-/**
- * hwspin_lock_timeout() - lock an hwspinlock with timeout limit
- * @hwlock: the hwspinlock to be locked
- * @to: timeout value in msecs
- *
- * This function locks the underlying @hwlock. If the @hwlock
- * is already taken, the function will busy loop waiting for it to
- * be released, but give up when @timeout msecs have elapsed.
- *
- * Upon a successful return from this function, preemption is disabled
- * so the caller must not sleep, and is advised to release the hwspinlock
- * as soon as possible.
- * This is required in order to minimize remote cores polling on the
- * hardware interconnect.
- *
- * Returns 0 when the @hwlock was successfully taken, and an appropriate
- * error code otherwise (most notably an -ETIMEDOUT if the @hwlock is still
- * busy after @timeout msecs). The function will never sleep.
- */
-static inline
-int hwspin_lock_timeout(struct hwspinlock *hwlock, unsigned int to)
-{
-	return __hwspin_lock_timeout(hwlock, to, 0, NULL);
-}
-
-/**
- * hwspin_unlock_irqrestore() - unlock hwspinlock, restore irq state
- * @hwlock: a previously-acquired hwspinlock which we want to unlock
- * @flags: previous caller's interrupt state to restore
- *
- * This function will unlock a specific hwspinlock, enable preemption and
- * restore the previous state of the local interrupts. It should be used
- * to undo, e.g., hwspin_trylock_irqsave().
- *
- * @hwlock must be already locked before calling this function: it is a bug
- * to call unlock on a @hwlock that is already unlocked.
- */
-static inline void hwspin_unlock_irqrestore(struct hwspinlock *hwlock,
-							unsigned long *flags)
-{
-	__hwspin_unlock(hwlock, HWLOCK_IRQSTATE, flags);
-}
-
-/**
- * hwspin_unlock_irq() - unlock hwspinlock, enable interrupts
- * @hwlock: a previously-acquired hwspinlock which we want to unlock
- *
- * This function will unlock a specific hwspinlock, enable preemption and
- * enable local interrupts. Should be used to undo hwspin_lock_irq().
- *
- * @hwlock must be already locked (e.g. by hwspin_trylock_irq()) before
- * calling this function: it is a bug to call unlock on a @hwlock that is
- * already unlocked.
- */
-static inline void hwspin_unlock_irq(struct hwspinlock *hwlock)
-{
-	__hwspin_unlock(hwlock, HWLOCK_IRQ, NULL);
-}
-
-/**
- * hwspin_unlock() - unlock hwspinlock
- * @hwlock: a previously-acquired hwspinlock which we want to unlock
- *
- * This function will unlock a specific hwspinlock and enable preemption
- * back.
- *
- * @hwlock must be already locked (e.g. by hwspin_trylock()) before calling
- * this function: it is a bug to call unlock on a @hwlock that is already
- * unlocked.
- */
-static inline void hwspin_unlock(struct hwspinlock *hwlock)
-{
-	__hwspin_unlock(hwlock, 0, NULL);
-}
-
-#endif /* __LINUX_HWSPINLOCK_H */
diff --git a/ANDROID_3.4.5/include/linux/hyperv.h b/ANDROID_3.4.5/include/linux/hyperv.h
deleted file mode 100644
index 5852545e..00000000
--- a/ANDROID_3.4.5/include/linux/hyperv.h
+++ /dev/null
@@ -1,1046 +0,0 @@
-/*
- *
- * Copyright (c) 2011, Microsoft Corporation.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc., 59 Temple
- * Place - Suite 330, Boston, MA 02111-1307 USA.
- *
- * Authors:
- *   Haiyang Zhang <haiyangz@microsoft.com>
- *   Hank Janssen  <hjanssen@microsoft.com>
- *   K. Y. Srinivasan <kys@microsoft.com>
- *
- */
-
-#ifndef _HYPERV_H
-#define _HYPERV_H
-
-#include <linux/types.h>
-
-/*
- * An implementation of HyperV key value pair (KVP) functionality for Linux.
- *
- *
- * Copyright (C) 2010, Novell, Inc.
- * Author : K. Y. Srinivasan <ksrinivasan@novell.com>
- *
- */
-
-/*
- * Maximum value size - used for both key names and value data, and includes
- * any applicable NULL terminators.
- *
- * Note:  This limit is somewhat arbitrary, but falls easily within what is
- * supported for all native guests (back to Win 2000) and what is reasonable
- * for the IC KVP exchange functionality.  Note that Windows Me/98/95 are
- * limited to 255 character key names.
- *
- * MSDN recommends not storing data values larger than 2048 bytes in the
- * registry.
- *
- * Note:  This value is used in defining the KVP exchange message - this value
- * cannot be modified without affecting the message size and compatibility.
- */
-
-/*
- * bytes, including any null terminators
- */
-#define HV_KVP_EXCHANGE_MAX_VALUE_SIZE          (2048)
-
-
-/*
- * Maximum key size - the registry limit for the length of an entry name
- * is 256 characters, including the null terminator
- */
-
-#define HV_KVP_EXCHANGE_MAX_KEY_SIZE            (512)
-
-/*
- * In Linux, we implement the KVP functionality in two components:
- * 1) The kernel component which is packaged as part of the hv_utils driver
- * is responsible for communicating with the host and responsible for
- * implementing the host/guest protocol. 2) A user level daemon that is
- * responsible for data gathering.
- *
- * Host/Guest Protocol: The host iterates over an index and expects the guest
- * to assign a key name to the index and also return the value corresponding to
- * the key. The host will have atmost one KVP transaction outstanding at any
- * given point in time. The host side iteration stops when the guest returns
- * an error. Microsoft has specified the following mapping of key names to
- * host specified index:
- *
- *	Index		Key Name
- *	0		FullyQualifiedDomainName
- *	1		IntegrationServicesVersion
- *	2		NetworkAddressIPv4
- *	3		NetworkAddressIPv6
- *	4		OSBuildNumber
- *	5		OSName
- *	6		OSMajorVersion
- *	7		OSMinorVersion
- *	8		OSVersion
- *	9		ProcessorArchitecture
- *
- * The Windows host expects the Key Name and Key Value to be encoded in utf16.
- *
- * Guest Kernel/KVP Daemon Protocol: As noted earlier, we implement all of the
- * data gathering functionality in a user mode daemon. The user level daemon
- * is also responsible for binding the key name to the index as well. The
- * kernel and user-level daemon communicate using a connector channel.
- *
- * The user mode component first registers with the
- * the kernel component. Subsequently, the kernel component requests, data
- * for the specified keys. In response to this message the user mode component
- * fills in the value corresponding to the specified key. We overload the
- * sequence field in the cn_msg header to define our KVP message types.
- *
- *
- * The kernel component simply acts as a conduit for communication between the
- * Windows host and the user-level daemon. The kernel component passes up the
- * index received from the Host to the user-level daemon. If the index is
- * valid (supported), the corresponding key as well as its
- * value (both are strings) is returned. If the index is invalid
- * (not supported), a NULL key string is returned.
- */
-
-
-/*
- * Registry value types.
- */
-
-#define REG_SZ 1
-#define REG_U32 4
-#define REG_U64 8
-
-enum hv_kvp_exchg_op {
-	KVP_OP_GET = 0,
-	KVP_OP_SET,
-	KVP_OP_DELETE,
-	KVP_OP_ENUMERATE,
-	KVP_OP_REGISTER,
-	KVP_OP_COUNT /* Number of operations, must be last. */
-};
-
-enum hv_kvp_exchg_pool {
-	KVP_POOL_EXTERNAL = 0,
-	KVP_POOL_GUEST,
-	KVP_POOL_AUTO,
-	KVP_POOL_AUTO_EXTERNAL,
-	KVP_POOL_AUTO_INTERNAL,
-	KVP_POOL_COUNT /* Number of pools, must be last. */
-};
-
-struct hv_kvp_hdr {
-	__u8 operation;
-	__u8 pool;
-	__u16 pad;
-} __attribute__((packed));
-
-struct hv_kvp_exchg_msg_value {
-	__u32 value_type;
-	__u32 key_size;
-	__u32 value_size;
-	__u8 key[HV_KVP_EXCHANGE_MAX_KEY_SIZE];
-	union {
-		__u8 value[HV_KVP_EXCHANGE_MAX_VALUE_SIZE];
-		__u32 value_u32;
-		__u64 value_u64;
-	};
-} __attribute__((packed));
-
-struct hv_kvp_msg_enumerate {
-	__u32 index;
-	struct hv_kvp_exchg_msg_value data;
-} __attribute__((packed));
-
-struct hv_kvp_msg_get {
-	struct hv_kvp_exchg_msg_value data;
-};
-
-struct hv_kvp_msg_set {
-	struct hv_kvp_exchg_msg_value data;
-};
-
-struct hv_kvp_msg_delete {
-	__u32 key_size;
-	__u8 key[HV_KVP_EXCHANGE_MAX_KEY_SIZE];
-};
-
-struct hv_kvp_register {
-	__u8 version[HV_KVP_EXCHANGE_MAX_KEY_SIZE];
-};
-
-struct hv_kvp_msg {
-	struct hv_kvp_hdr	kvp_hdr;
-	union {
-		struct hv_kvp_msg_get		kvp_get;
-		struct hv_kvp_msg_set		kvp_set;
-		struct hv_kvp_msg_delete	kvp_delete;
-		struct hv_kvp_msg_enumerate	kvp_enum_data;
-		struct hv_kvp_register		kvp_register;
-	} body;
-} __attribute__((packed));
-
-#ifdef __KERNEL__
-#include <linux/scatterlist.h>
-#include <linux/list.h>
-#include <linux/uuid.h>
-#include <linux/timer.h>
-#include <linux/workqueue.h>
-#include <linux/completion.h>
-#include <linux/device.h>
-#include <linux/mod_devicetable.h>
-
-
-#define MAX_PAGE_BUFFER_COUNT				19
-#define MAX_MULTIPAGE_BUFFER_COUNT			32 /* 128K */
-
-#pragma pack(push, 1)
-
-/* Single-page buffer */
-struct hv_page_buffer {
-	u32 len;
-	u32 offset;
-	u64 pfn;
-};
-
-/* Multiple-page buffer */
-struct hv_multipage_buffer {
-	/* Length and Offset determines the # of pfns in the array */
-	u32 len;
-	u32 offset;
-	u64 pfn_array[MAX_MULTIPAGE_BUFFER_COUNT];
-};
-
-/* 0x18 includes the proprietary packet header */
-#define MAX_PAGE_BUFFER_PACKET		(0x18 +			\
-					(sizeof(struct hv_page_buffer) * \
-					 MAX_PAGE_BUFFER_COUNT))
-#define MAX_MULTIPAGE_BUFFER_PACKET	(0x18 +			\
-					 sizeof(struct hv_multipage_buffer))
-
-
-#pragma pack(pop)
-
-struct hv_ring_buffer {
-	/* Offset in bytes from the start of ring data below */
-	u32 write_index;
-
-	/* Offset in bytes from the start of ring data below */
-	u32 read_index;
-
-	u32 interrupt_mask;
-
-	/* Pad it to PAGE_SIZE so that data starts on page boundary */
-	u8	reserved[4084];
-
-	/* NOTE:
-	 * The interrupt_mask field is used only for channels but since our
-	 * vmbus connection also uses this data structure and its data starts
-	 * here, we commented out this field.
-	 */
-
-	/*
-	 * Ring data starts here + RingDataStartOffset
-	 * !!! DO NOT place any fields below this !!!
-	 */
-	u8 buffer[0];
-} __packed;
-
-struct hv_ring_buffer_info {
-	struct hv_ring_buffer *ring_buffer;
-	u32 ring_size;			/* Include the shared header */
-	spinlock_t ring_lock;
-
-	u32 ring_datasize;		/* < ring_size */
-	u32 ring_data_startoffset;
-};
-
-struct hv_ring_buffer_debug_info {
-	u32 current_interrupt_mask;
-	u32 current_read_index;
-	u32 current_write_index;
-	u32 bytes_avail_toread;
-	u32 bytes_avail_towrite;
-};
-
-/*
- * We use the same version numbering for all Hyper-V modules.
- *
- * Definition of versioning is as follows;
- *
- *	Major Number	Changes for these scenarios;
- *			1.	When a new version of Windows Hyper-V
- *				is released.
- *			2.	A Major change has occurred in the
- *				Linux IC's.
- *			(For example the merge for the first time
- *			into the kernel) Every time the Major Number
- *			changes, the Revision number is reset to 0.
- *	Minor Number	Changes when new functionality is added
- *			to the Linux IC's that is not a bug fix.
- *
- * 3.1 - Added completed hv_utils driver. Shutdown/Heartbeat/Timesync
- */
-#define HV_DRV_VERSION           "3.1"
-
-
-/*
- * A revision number of vmbus that is used for ensuring both ends on a
- * partition are using compatible versions.
- */
-#define VMBUS_REVISION_NUMBER		13
-
-/* Make maximum size of pipe payload of 16K */
-#define MAX_PIPE_DATA_PAYLOAD		(sizeof(u8) * 16384)
-
-/* Define PipeMode values. */
-#define VMBUS_PIPE_TYPE_BYTE		0x00000000
-#define VMBUS_PIPE_TYPE_MESSAGE		0x00000004
-
-/* The size of the user defined data buffer for non-pipe offers. */
-#define MAX_USER_DEFINED_BYTES		120
-
-/* The size of the user defined data buffer for pipe offers. */
-#define MAX_PIPE_USER_DEFINED_BYTES	116
-
-/*
- * At the center of the Channel Management library is the Channel Offer. This
- * struct contains the fundamental information about an offer.
- */
-struct vmbus_channel_offer {
-	uuid_le if_type;
-	uuid_le if_instance;
-	u64 int_latency; /* in 100ns units */
-	u32 if_revision;
-	u32 server_ctx_size;	/* in bytes */
-	u16 chn_flags;
-	u16 mmio_megabytes;		/* in bytes * 1024 * 1024 */
-
-	union {
-		/* Non-pipes: The user has MAX_USER_DEFINED_BYTES bytes. */
-		struct {
-			unsigned char user_def[MAX_USER_DEFINED_BYTES];
-		} std;
-
-		/*
-		 * Pipes:
-		 * The following sructure is an integrated pipe protocol, which
-		 * is implemented on top of standard user-defined data. Pipe
-		 * clients have MAX_PIPE_USER_DEFINED_BYTES left for their own
-		 * use.
-		 */
-		struct {
-			u32  pipe_mode;
-			unsigned char user_def[MAX_PIPE_USER_DEFINED_BYTES];
-		} pipe;
-	} u;
-	u32 padding;
-} __packed;
-
-/* Server Flags */
-#define VMBUS_CHANNEL_ENUMERATE_DEVICE_INTERFACE	1
-#define VMBUS_CHANNEL_SERVER_SUPPORTS_TRANSFER_PAGES	2
-#define VMBUS_CHANNEL_SERVER_SUPPORTS_GPADLS		4
-#define VMBUS_CHANNEL_NAMED_PIPE_MODE			0x10
-#define VMBUS_CHANNEL_LOOPBACK_OFFER			0x100
-#define VMBUS_CHANNEL_PARENT_OFFER			0x200
-#define VMBUS_CHANNEL_REQUEST_MONITORED_NOTIFICATION	0x400
-
-struct vmpacket_descriptor {
-	u16 type;
-	u16 offset8;
-	u16 len8;
-	u16 flags;
-	u64 trans_id;
-} __packed;
-
-struct vmpacket_header {
-	u32 prev_pkt_start_offset;
-	struct vmpacket_descriptor descriptor;
-} __packed;
-
-struct vmtransfer_page_range {
-	u32 byte_count;
-	u32 byte_offset;
-} __packed;
-
-struct vmtransfer_page_packet_header {
-	struct vmpacket_descriptor d;
-	u16 xfer_pageset_id;
-	bool sender_owns_set;
-	u8 reserved;
-	u32 range_cnt;
-	struct vmtransfer_page_range ranges[1];
-} __packed;
-
-struct vmgpadl_packet_header {
-	struct vmpacket_descriptor d;
-	u32 gpadl;
-	u32 reserved;
-} __packed;
-
-struct vmadd_remove_transfer_page_set {
-	struct vmpacket_descriptor d;
-	u32 gpadl;
-	u16 xfer_pageset_id;
-	u16 reserved;
-} __packed;
-
-/*
- * This structure defines a range in guest physical space that can be made to
- * look virtually contiguous.
- */
-struct gpa_range {
-	u32 byte_count;
-	u32 byte_offset;
-	u64 pfn_array[0];
-};
-
-/*
- * This is the format for an Establish Gpadl packet, which contains a handle by
- * which this GPADL will be known and a set of GPA ranges associated with it.
- * This can be converted to a MDL by the guest OS.  If there are multiple GPA
- * ranges, then the resulting MDL will be "chained," representing multiple VA
- * ranges.
- */
-struct vmestablish_gpadl {
-	struct vmpacket_descriptor d;
-	u32 gpadl;
-	u32 range_cnt;
-	struct gpa_range range[1];
-} __packed;
-
-/*
- * This is the format for a Teardown Gpadl packet, which indicates that the
- * GPADL handle in the Establish Gpadl packet will never be referenced again.
- */
-struct vmteardown_gpadl {
-	struct vmpacket_descriptor d;
-	u32 gpadl;
-	u32 reserved;	/* for alignment to a 8-byte boundary */
-} __packed;
-
-/*
- * This is the format for a GPA-Direct packet, which contains a set of GPA
- * ranges, in addition to commands and/or data.
- */
-struct vmdata_gpa_direct {
-	struct vmpacket_descriptor d;
-	u32 reserved;
-	u32 range_cnt;
-	struct gpa_range range[1];
-} __packed;
-
-/* This is the format for a Additional Data Packet. */
-struct vmadditional_data {
-	struct vmpacket_descriptor d;
-	u64 total_bytes;
-	u32 offset;
-	u32 byte_cnt;
-	unsigned char data[1];
-} __packed;
-
-union vmpacket_largest_possible_header {
-	struct vmpacket_descriptor simple_hdr;
-	struct vmtransfer_page_packet_header xfer_page_hdr;
-	struct vmgpadl_packet_header gpadl_hdr;
-	struct vmadd_remove_transfer_page_set add_rm_xfer_page_hdr;
-	struct vmestablish_gpadl establish_gpadl_hdr;
-	struct vmteardown_gpadl teardown_gpadl_hdr;
-	struct vmdata_gpa_direct data_gpa_direct_hdr;
-};
-
-#define VMPACKET_DATA_START_ADDRESS(__packet)	\
-	(void *)(((unsigned char *)__packet) +	\
-	 ((struct vmpacket_descriptor)__packet)->offset8 * 8)
-
-#define VMPACKET_DATA_LENGTH(__packet)		\
-	((((struct vmpacket_descriptor)__packet)->len8 -	\
-	  ((struct vmpacket_descriptor)__packet)->offset8) * 8)
-
-#define VMPACKET_TRANSFER_MODE(__packet)	\
-	(((struct IMPACT)__packet)->type)
-
-enum vmbus_packet_type {
-	VM_PKT_INVALID				= 0x0,
-	VM_PKT_SYNCH				= 0x1,
-	VM_PKT_ADD_XFER_PAGESET			= 0x2,
-	VM_PKT_RM_XFER_PAGESET			= 0x3,
-	VM_PKT_ESTABLISH_GPADL			= 0x4,
-	VM_PKT_TEARDOWN_GPADL			= 0x5,
-	VM_PKT_DATA_INBAND			= 0x6,
-	VM_PKT_DATA_USING_XFER_PAGES		= 0x7,
-	VM_PKT_DATA_USING_GPADL			= 0x8,
-	VM_PKT_DATA_USING_GPA_DIRECT		= 0x9,
-	VM_PKT_CANCEL_REQUEST			= 0xa,
-	VM_PKT_COMP				= 0xb,
-	VM_PKT_DATA_USING_ADDITIONAL_PKT	= 0xc,
-	VM_PKT_ADDITIONAL_DATA			= 0xd
-};
-
-#define VMBUS_DATA_PACKET_FLAG_COMPLETION_REQUESTED	1
-
-
-/* Version 1 messages */
-enum vmbus_channel_message_type {
-	CHANNELMSG_INVALID			=  0,
-	CHANNELMSG_OFFERCHANNEL		=  1,
-	CHANNELMSG_RESCIND_CHANNELOFFER	=  2,
-	CHANNELMSG_REQUESTOFFERS		=  3,
-	CHANNELMSG_ALLOFFERS_DELIVERED	=  4,
-	CHANNELMSG_OPENCHANNEL		=  5,
-	CHANNELMSG_OPENCHANNEL_RESULT		=  6,
-	CHANNELMSG_CLOSECHANNEL		=  7,
-	CHANNELMSG_GPADL_HEADER		=  8,
-	CHANNELMSG_GPADL_BODY			=  9,
-	CHANNELMSG_GPADL_CREATED		= 10,
-	CHANNELMSG_GPADL_TEARDOWN		= 11,
-	CHANNELMSG_GPADL_TORNDOWN		= 12,
-	CHANNELMSG_RELID_RELEASED		= 13,
-	CHANNELMSG_INITIATE_CONTACT		= 14,
-	CHANNELMSG_VERSION_RESPONSE		= 15,
-	CHANNELMSG_UNLOAD			= 16,
-#ifdef VMBUS_FEATURE_PARENT_OR_PEER_MEMORY_MAPPED_INTO_A_CHILD
-	CHANNELMSG_VIEWRANGE_ADD		= 17,
-	CHANNELMSG_VIEWRANGE_REMOVE		= 18,
-#endif
-	CHANNELMSG_COUNT
-};
-
-struct vmbus_channel_message_header {
-	enum vmbus_channel_message_type msgtype;
-	u32 padding;
-} __packed;
-
-/* Query VMBus Version parameters */
-struct vmbus_channel_query_vmbus_version {
-	struct vmbus_channel_message_header header;
-	u32 version;
-} __packed;
-
-/* VMBus Version Supported parameters */
-struct vmbus_channel_version_supported {
-	struct vmbus_channel_message_header header;
-	bool version_supported;
-} __packed;
-
-/* Offer Channel parameters */
-struct vmbus_channel_offer_channel {
-	struct vmbus_channel_message_header header;
-	struct vmbus_channel_offer offer;
-	u32 child_relid;
-	u8 monitorid;
-	bool monitor_allocated;
-} __packed;
-
-/* Rescind Offer parameters */
-struct vmbus_channel_rescind_offer {
-	struct vmbus_channel_message_header header;
-	u32 child_relid;
-} __packed;
-
-/*
- * Request Offer -- no parameters, SynIC message contains the partition ID
- * Set Snoop -- no parameters, SynIC message contains the partition ID
- * Clear Snoop -- no parameters, SynIC message contains the partition ID
- * All Offers Delivered -- no parameters, SynIC message contains the partition
- *		           ID
- * Flush Client -- no parameters, SynIC message contains the partition ID
- */
-
-/* Open Channel parameters */
-struct vmbus_channel_open_channel {
-	struct vmbus_channel_message_header header;
-
-	/* Identifies the specific VMBus channel that is being opened. */
-	u32 child_relid;
-
-	/* ID making a particular open request at a channel offer unique. */
-	u32 openid;
-
-	/* GPADL for the channel's ring buffer. */
-	u32 ringbuffer_gpadlhandle;
-
-	/* GPADL for the channel's server context save area. */
-	u32 server_contextarea_gpadlhandle;
-
-	/*
-	* The upstream ring buffer begins at offset zero in the memory
-	* described by RingBufferGpadlHandle. The downstream ring buffer
-	* follows it at this offset (in pages).
-	*/
-	u32 downstream_ringbuffer_pageoffset;
-
-	/* User-specific data to be passed along to the server endpoint. */
-	unsigned char userdata[MAX_USER_DEFINED_BYTES];
-} __packed;
-
-/* Open Channel Result parameters */
-struct vmbus_channel_open_result {
-	struct vmbus_channel_message_header header;
-	u32 child_relid;
-	u32 openid;
-	u32 status;
-} __packed;
-
-/* Close channel parameters; */
-struct vmbus_channel_close_channel {
-	struct vmbus_channel_message_header header;
-	u32 child_relid;
-} __packed;
-
-/* Channel Message GPADL */
-#define GPADL_TYPE_RING_BUFFER		1
-#define GPADL_TYPE_SERVER_SAVE_AREA	2
-#define GPADL_TYPE_TRANSACTION		8
-
-/*
- * The number of PFNs in a GPADL message is defined by the number of
- * pages that would be spanned by ByteCount and ByteOffset.  If the
- * implied number of PFNs won't fit in this packet, there will be a
- * follow-up packet that contains more.
- */
-struct vmbus_channel_gpadl_header {
-	struct vmbus_channel_message_header header;
-	u32 child_relid;
-	u32 gpadl;
-	u16 range_buflen;
-	u16 rangecount;
-	struct gpa_range range[0];
-} __packed;
-
-/* This is the followup packet that contains more PFNs. */
-struct vmbus_channel_gpadl_body {
-	struct vmbus_channel_message_header header;
-	u32 msgnumber;
-	u32 gpadl;
-	u64 pfn[0];
-} __packed;
-
-struct vmbus_channel_gpadl_created {
-	struct vmbus_channel_message_header header;
-	u32 child_relid;
-	u32 gpadl;
-	u32 creation_status;
-} __packed;
-
-struct vmbus_channel_gpadl_teardown {
-	struct vmbus_channel_message_header header;
-	u32 child_relid;
-	u32 gpadl;
-} __packed;
-
-struct vmbus_channel_gpadl_torndown {
-	struct vmbus_channel_message_header header;
-	u32 gpadl;
-} __packed;
-
-#ifdef VMBUS_FEATURE_PARENT_OR_PEER_MEMORY_MAPPED_INTO_A_CHILD
-struct vmbus_channel_view_range_add {
-	struct vmbus_channel_message_header header;
-	PHYSICAL_ADDRESS viewrange_base;
-	u64 viewrange_length;
-	u32 child_relid;
-} __packed;
-
-struct vmbus_channel_view_range_remove {
-	struct vmbus_channel_message_header header;
-	PHYSICAL_ADDRESS viewrange_base;
-	u32 child_relid;
-} __packed;
-#endif
-
-struct vmbus_channel_relid_released {
-	struct vmbus_channel_message_header header;
-	u32 child_relid;
-} __packed;
-
-struct vmbus_channel_initiate_contact {
-	struct vmbus_channel_message_header header;
-	u32 vmbus_version_requested;
-	u32 padding2;
-	u64 interrupt_page;
-	u64 monitor_page1;
-	u64 monitor_page2;
-} __packed;
-
-struct vmbus_channel_version_response {
-	struct vmbus_channel_message_header header;
-	bool version_supported;
-} __packed;
-
-enum vmbus_channel_state {
-	CHANNEL_OFFER_STATE,
-	CHANNEL_OPENING_STATE,
-	CHANNEL_OPEN_STATE,
-};
-
-struct vmbus_channel_debug_info {
-	u32 relid;
-	enum vmbus_channel_state state;
-	uuid_le interfacetype;
-	uuid_le interface_instance;
-	u32 monitorid;
-	u32 servermonitor_pending;
-	u32 servermonitor_latency;
-	u32 servermonitor_connectionid;
-	u32 clientmonitor_pending;
-	u32 clientmonitor_latency;
-	u32 clientmonitor_connectionid;
-
-	struct hv_ring_buffer_debug_info inbound;
-	struct hv_ring_buffer_debug_info outbound;
-};
-
-/*
- * Represents each channel msg on the vmbus connection This is a
- * variable-size data structure depending on the msg type itself
- */
-struct vmbus_channel_msginfo {
-	/* Bookkeeping stuff */
-	struct list_head msglistentry;
-
-	/* So far, this is only used to handle gpadl body message */
-	struct list_head submsglist;
-
-	/* Synchronize the request/response if needed */
-	struct completion  waitevent;
-	union {
-		struct vmbus_channel_version_supported version_supported;
-		struct vmbus_channel_open_result open_result;
-		struct vmbus_channel_gpadl_torndown gpadl_torndown;
-		struct vmbus_channel_gpadl_created gpadl_created;
-		struct vmbus_channel_version_response version_response;
-	} response;
-
-	u32 msgsize;
-	/*
-	 * The channel message that goes out on the "wire".
-	 * It will contain at minimum the VMBUS_CHANNEL_MESSAGE_HEADER header
-	 */
-	unsigned char msg[0];
-};
-
-struct vmbus_close_msg {
-	struct vmbus_channel_msginfo info;
-	struct vmbus_channel_close_channel msg;
-};
-
-struct vmbus_channel {
-	struct list_head listentry;
-
-	struct hv_device *device_obj;
-
-	struct work_struct work;
-
-	enum vmbus_channel_state state;
-
-	struct vmbus_channel_offer_channel offermsg;
-	/*
-	 * These are based on the OfferMsg.MonitorId.
-	 * Save it here for easy access.
-	 */
-	u8 monitor_grp;
-	u8 monitor_bit;
-
-	u32 ringbuffer_gpadlhandle;
-
-	/* Allocated memory for ring buffer */
-	void *ringbuffer_pages;
-	u32 ringbuffer_pagecount;
-	struct hv_ring_buffer_info outbound;	/* send to parent */
-	struct hv_ring_buffer_info inbound;	/* receive from parent */
-	spinlock_t inbound_lock;
-	struct workqueue_struct *controlwq;
-
-	struct vmbus_close_msg close_msg;
-
-	/* Channel callback are invoked in this workqueue context */
-	/* HANDLE dataWorkQueue; */
-
-	void (*onchannel_callback)(void *context);
-	void *channel_callback_context;
-};
-
-void vmbus_onmessage(void *context);
-
-int vmbus_request_offers(void);
-
-/* The format must be the same as struct vmdata_gpa_direct */
-struct vmbus_channel_packet_page_buffer {
-	u16 type;
-	u16 dataoffset8;
-	u16 length8;
-	u16 flags;
-	u64 transactionid;
-	u32 reserved;
-	u32 rangecount;
-	struct hv_page_buffer range[MAX_PAGE_BUFFER_COUNT];
-} __packed;
-
-/* The format must be the same as struct vmdata_gpa_direct */
-struct vmbus_channel_packet_multipage_buffer {
-	u16 type;
-	u16 dataoffset8;
-	u16 length8;
-	u16 flags;
-	u64 transactionid;
-	u32 reserved;
-	u32 rangecount;		/* Always 1 in this case */
-	struct hv_multipage_buffer range;
-} __packed;
-
-
-extern int vmbus_open(struct vmbus_channel *channel,
-			    u32 send_ringbuffersize,
-			    u32 recv_ringbuffersize,
-			    void *userdata,
-			    u32 userdatalen,
-			    void(*onchannel_callback)(void *context),
-			    void *context);
-
-extern void vmbus_close(struct vmbus_channel *channel);
-
-extern int vmbus_sendpacket(struct vmbus_channel *channel,
-				  const void *buffer,
-				  u32 bufferLen,
-				  u64 requestid,
-				  enum vmbus_packet_type type,
-				  u32 flags);
-
-extern int vmbus_sendpacket_pagebuffer(struct vmbus_channel *channel,
-					    struct hv_page_buffer pagebuffers[],
-					    u32 pagecount,
-					    void *buffer,
-					    u32 bufferlen,
-					    u64 requestid);
-
-extern int vmbus_sendpacket_multipagebuffer(struct vmbus_channel *channel,
-					struct hv_multipage_buffer *mpb,
-					void *buffer,
-					u32 bufferlen,
-					u64 requestid);
-
-extern int vmbus_establish_gpadl(struct vmbus_channel *channel,
-				      void *kbuffer,
-				      u32 size,
-				      u32 *gpadl_handle);
-
-extern int vmbus_teardown_gpadl(struct vmbus_channel *channel,
-				     u32 gpadl_handle);
-
-extern int vmbus_recvpacket(struct vmbus_channel *channel,
-				  void *buffer,
-				  u32 bufferlen,
-				  u32 *buffer_actual_len,
-				  u64 *requestid);
-
-extern int vmbus_recvpacket_raw(struct vmbus_channel *channel,
-				     void *buffer,
-				     u32 bufferlen,
-				     u32 *buffer_actual_len,
-				     u64 *requestid);
-
-
-extern void vmbus_get_debug_info(struct vmbus_channel *channel,
-				     struct vmbus_channel_debug_info *debug);
-
-extern void vmbus_ontimer(unsigned long data);
-
-struct hv_dev_port_info {
-	u32 int_mask;
-	u32 read_idx;
-	u32 write_idx;
-	u32 bytes_avail_toread;
-	u32 bytes_avail_towrite;
-};
-
-/* Base driver object */
-struct hv_driver {
-	const char *name;
-
-	/* the device type supported by this driver */
-	uuid_le dev_type;
-	const struct hv_vmbus_device_id *id_table;
-
-	struct device_driver driver;
-
-	int (*probe)(struct hv_device *, const struct hv_vmbus_device_id *);
-	int (*remove)(struct hv_device *);
-	void (*shutdown)(struct hv_device *);
-
-};
-
-/* Base device object */
-struct hv_device {
-	/* the device type id of this device */
-	uuid_le dev_type;
-
-	/* the device instance id of this device */
-	uuid_le dev_instance;
-
-	struct device device;
-
-	struct vmbus_channel *channel;
-};
-
-
-static inline struct hv_device *device_to_hv_device(struct device *d)
-{
-	return container_of(d, struct hv_device, device);
-}
-
-static inline struct hv_driver *drv_to_hv_drv(struct device_driver *d)
-{
-	return container_of(d, struct hv_driver, driver);
-}
-
-static inline void hv_set_drvdata(struct hv_device *dev, void *data)
-{
-	dev_set_drvdata(&dev->device, data);
-}
-
-static inline void *hv_get_drvdata(struct hv_device *dev)
-{
-	return dev_get_drvdata(&dev->device);
-}
-
-/* Vmbus interface */
-#define vmbus_driver_register(driver)	\
-	__vmbus_driver_register(driver, THIS_MODULE, KBUILD_MODNAME)
-int __must_check __vmbus_driver_register(struct hv_driver *hv_driver,
-					 struct module *owner,
-					 const char *mod_name);
-void vmbus_driver_unregister(struct hv_driver *hv_driver);
-
-/**
- * VMBUS_DEVICE - macro used to describe a specific hyperv vmbus device
- *
- * This macro is used to create a struct hv_vmbus_device_id that matches a
- * specific device.
- */
-#define VMBUS_DEVICE(g0, g1, g2, g3, g4, g5, g6, g7,	\
-		     g8, g9, ga, gb, gc, gd, ge, gf)	\
-	.guid = { g0, g1, g2, g3, g4, g5, g6, g7,	\
-		  g8, g9, ga, gb, gc, gd, ge, gf },
-
-/*
- * Common header for Hyper-V ICs
- */
-
-#define ICMSGTYPE_NEGOTIATE		0
-#define ICMSGTYPE_HEARTBEAT		1
-#define ICMSGTYPE_KVPEXCHANGE		2
-#define ICMSGTYPE_SHUTDOWN		3
-#define ICMSGTYPE_TIMESYNC		4
-#define ICMSGTYPE_VSS			5
-
-#define ICMSGHDRFLAG_TRANSACTION	1
-#define ICMSGHDRFLAG_REQUEST		2
-#define ICMSGHDRFLAG_RESPONSE		4
-
-#define HV_S_OK				0x00000000
-#define HV_E_FAIL			0x80004005
-#define HV_S_CONT			0x80070103
-#define HV_ERROR_NOT_SUPPORTED		0x80070032
-#define HV_ERROR_MACHINE_LOCKED		0x800704F7
-
-/*
- * While we want to handle util services as regular devices,
- * there is only one instance of each of these services; so
- * we statically allocate the service specific state.
- */
-
-struct hv_util_service {
-	u8 *recv_buffer;
-	void (*util_cb)(void *);
-	int (*util_init)(struct hv_util_service *);
-	void (*util_deinit)(void);
-};
-
-struct vmbuspipe_hdr {
-	u32 flags;
-	u32 msgsize;
-} __packed;
-
-struct ic_version {
-	u16 major;
-	u16 minor;
-} __packed;
-
-struct icmsg_hdr {
-	struct ic_version icverframe;
-	u16 icmsgtype;
-	struct ic_version icvermsg;
-	u16 icmsgsize;
-	u32 status;
-	u8 ictransaction_id;
-	u8 icflags;
-	u8 reserved[2];
-} __packed;
-
-struct icmsg_negotiate {
-	u16 icframe_vercnt;
-	u16 icmsg_vercnt;
-	u32 reserved;
-	struct ic_version icversion_data[1]; /* any size array */
-} __packed;
-
-struct shutdown_msg_data {
-	u32 reason_code;
-	u32 timeout_seconds;
-	u32 flags;
-	u8  display_message[2048];
-} __packed;
-
-struct heartbeat_msg_data {
-	u64 seq_num;
-	u32 reserved[8];
-} __packed;
-
-/* Time Sync IC defs */
-#define ICTIMESYNCFLAG_PROBE	0
-#define ICTIMESYNCFLAG_SYNC	1
-#define ICTIMESYNCFLAG_SAMPLE	2
-
-#ifdef __x86_64__
-#define WLTIMEDELTA	116444736000000000L	/* in 100ns unit */
-#else
-#define WLTIMEDELTA	116444736000000000LL
-#endif
-
-struct ictimesync_data {
-	u64 parenttime;
-	u64 childtime;
-	u64 roundtriptime;
-	u8 flags;
-} __packed;
-
-struct hyperv_service_callback {
-	u8 msg_type;
-	char *log_msg;
-	uuid_le data;
-	struct vmbus_channel *channel;
-	void (*callback) (void *context);
-};
-
-extern void vmbus_prep_negotiate_resp(struct icmsg_hdr *,
-				      struct icmsg_negotiate *, u8 *);
-
-int hv_kvp_init(struct hv_util_service *);
-void hv_kvp_deinit(void);
-void hv_kvp_onchannelcallback(void *);
-
-#endif /* __KERNEL__ */
-#endif /* _HYPERV_H */
diff --git a/ANDROID_3.4.5/include/linux/hysdn_if.h b/ANDROID_3.4.5/include/linux/hysdn_if.h
deleted file mode 100644
index 00236ae3..00000000
--- a/ANDROID_3.4.5/include/linux/hysdn_if.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/* $Id: hysdn_if.h,v 1.1.8.3 2001/09/23 22:25:05 kai Exp $
- *
- * Linux driver for HYSDN cards
- * ioctl definitions shared by hynetmgr and driver.
- *
- * Author    Werner Cornelius (werner@titro.de) for Hypercope GmbH
- * Copyright 1999 by Werner Cornelius (werner@titro.de)
- *
- * This software may be used and distributed according to the terms
- * of the GNU General Public License, incorporated herein by reference.
- *
- */
-
-/****************/
-/* error values */
-/****************/
-#define ERR_NONE             0 /* no error occurred */
-#define ERR_ALREADY_BOOT  1000 /* we are already booting */
-#define EPOF_BAD_MAGIC    1001 /* bad magic in POF header */
-#define ERR_BOARD_DPRAM   1002 /* board DPRAM failed */
-#define EPOF_INTERNAL     1003 /* internal POF handler error */
-#define EPOF_BAD_IMG_SIZE 1004 /* POF boot image size invalid */
-#define ERR_BOOTIMG_FAIL  1005 /* 1. stage boot image did not start */
-#define ERR_BOOTSEQ_FAIL  1006 /* 2. stage boot seq handshake timeout */
-#define ERR_POF_TIMEOUT   1007 /* timeout waiting for card pof ready */
-#define ERR_NOT_BOOTED    1008 /* operation only allowed when booted */
-#define ERR_CONF_LONG     1009 /* conf line is too long */ 
-#define ERR_INV_CHAN      1010 /* invalid channel number */ 
-#define ERR_ASYNC_TIME    1011 /* timeout sending async data */ 
-
-
-
-
diff --git a/ANDROID_3.4.5/include/linux/i2c-algo-bit.h b/ANDROID_3.4.5/include/linux/i2c-algo-bit.h
deleted file mode 100644
index 63904ba6..00000000
--- a/ANDROID_3.4.5/include/linux/i2c-algo-bit.h
+++ /dev/null
@@ -1,55 +0,0 @@
-/* ------------------------------------------------------------------------- */
-/* i2c-algo-bit.h i2c driver algorithms for bit-shift adapters               */
-/* ------------------------------------------------------------------------- */
-/*   Copyright (C) 1995-99 Simon G. Vogl
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
-    MA 02110-1301 USA.							     */
-/* ------------------------------------------------------------------------- */
-
-/* With some changes from Kyösti Mälkki <kmalkki@cc.hut.fi> and even
-   Frodo Looijaard <frodol@dds.nl> */
-
-#ifndef _LINUX_I2C_ALGO_BIT_H
-#define _LINUX_I2C_ALGO_BIT_H
-
-/* --- Defines for bit-adapters ---------------------------------------	*/
-/*
- * This struct contains the hw-dependent functions of bit-style adapters to
- * manipulate the line states, and to init any hw-specific features. This is
- * only used if you have more than one hw-type of adapter running.
- */
-struct i2c_algo_bit_data {
-	void *data;		/* private data for lowlevel routines */
-	void (*setsda) (void *data, int state);
-	void (*setscl) (void *data, int state);
-	int  (*getsda) (void *data);
-	int  (*getscl) (void *data);
-	int  (*pre_xfer)  (struct i2c_adapter *);
-	void (*post_xfer) (struct i2c_adapter *);
-
-	/* local settings */
-	int udelay;		/* half clock cycle time in us,
-				   minimum 2 us for fast-mode I2C,
-				   minimum 5 us for standard-mode I2C and SMBus,
-				   maximum 50 us for SMBus */
-	int timeout;		/* in jiffies */
-};
-
-int i2c_bit_add_bus(struct i2c_adapter *);
-int i2c_bit_add_numbered_bus(struct i2c_adapter *);
-extern const struct i2c_algorithm i2c_bit_algo;
-
-#endif /* _LINUX_I2C_ALGO_BIT_H */
diff --git a/ANDROID_3.4.5/include/linux/i2c-algo-pca.h b/ANDROID_3.4.5/include/linux/i2c-algo-pca.h
deleted file mode 100644
index 1364d62e..00000000
--- a/ANDROID_3.4.5/include/linux/i2c-algo-pca.h
+++ /dev/null
@@ -1,70 +0,0 @@
-#ifndef _LINUX_I2C_ALGO_PCA_H
-#define _LINUX_I2C_ALGO_PCA_H
-
-/* Chips known to the pca algo */
-#define I2C_PCA_CHIP_9564	0x00
-#define I2C_PCA_CHIP_9665	0x01
-
-/* Internal period for PCA9665 oscilator */
-#define I2C_PCA_OSC_PER		3 /* e10-8s */
-
-/* Clock speeds for the bus for PCA9564*/
-#define I2C_PCA_CON_330kHz	0x00
-#define I2C_PCA_CON_288kHz	0x01
-#define I2C_PCA_CON_217kHz	0x02
-#define I2C_PCA_CON_146kHz	0x03
-#define I2C_PCA_CON_88kHz	0x04
-#define I2C_PCA_CON_59kHz	0x05
-#define I2C_PCA_CON_44kHz	0x06
-#define I2C_PCA_CON_36kHz	0x07
-
-/* PCA9564 registers */
-#define I2C_PCA_STA		0x00 /* STATUS  Read Only  */
-#define I2C_PCA_TO		0x00 /* TIMEOUT Write Only */
-#define I2C_PCA_DAT		0x01 /* DATA    Read/Write */
-#define I2C_PCA_ADR		0x02 /* OWN ADR Read/Write */
-#define I2C_PCA_CON		0x03 /* CONTROL Read/Write */
-
-/* PCA9665 registers */
-#define I2C_PCA_INDPTR          0x00 /* INDIRECT Pointer Write Only */
-#define I2C_PCA_IND             0x02 /* INDIRECT Read/Write */
-
-/* PCA9665 indirect registers */
-#define I2C_PCA_ICOUNT          0x00 /* Byte Count for buffered mode */
-#define I2C_PCA_IADR            0x01 /* OWN ADR */
-#define I2C_PCA_ISCLL           0x02 /* SCL LOW period */
-#define I2C_PCA_ISCLH           0x03 /* SCL HIGH period */
-#define I2C_PCA_ITO             0x04 /* TIMEOUT */
-#define I2C_PCA_IPRESET         0x05 /* Parallel bus reset */
-#define I2C_PCA_IMODE           0x06 /* I2C Bus mode */
-
-/* PCA9665 I2C bus mode */
-#define I2C_PCA_MODE_STD        0x00 /* Standard mode */
-#define I2C_PCA_MODE_FAST       0x01 /* Fast mode */
-#define I2C_PCA_MODE_FASTP      0x02 /* Fast Plus mode */
-#define I2C_PCA_MODE_TURBO      0x03 /* Turbo mode */
-
-
-#define I2C_PCA_CON_AA		0x80 /* Assert Acknowledge */
-#define I2C_PCA_CON_ENSIO	0x40 /* Enable */
-#define I2C_PCA_CON_STA		0x20 /* Start */
-#define I2C_PCA_CON_STO		0x10 /* Stop */
-#define I2C_PCA_CON_SI		0x08 /* Serial Interrupt */
-#define I2C_PCA_CON_CR		0x07 /* Clock Rate (MASK) */
-
-struct i2c_algo_pca_data {
-	void 				*data;	/* private low level data */
-	void (*write_byte)		(void *data, int reg, int val);
-	int  (*read_byte)		(void *data, int reg);
-	int  (*wait_for_completion)	(void *data);
-	void (*reset_chip)		(void *data);
-	/* For PCA9564, use one of the predefined frequencies:
-	 * 330000, 288000, 217000, 146000, 88000, 59000, 44000, 36000
-	 * For PCA9665, use the frequency you want here. */
-	unsigned int			i2c_clock;
-};
-
-int i2c_pca_add_bus(struct i2c_adapter *);
-int i2c_pca_add_numbered_bus(struct i2c_adapter *);
-
-#endif /* _LINUX_I2C_ALGO_PCA_H */
diff --git a/ANDROID_3.4.5/include/linux/i2c-algo-pcf.h b/ANDROID_3.4.5/include/linux/i2c-algo-pcf.h
deleted file mode 100644
index 538e8f41..00000000
--- a/ANDROID_3.4.5/include/linux/i2c-algo-pcf.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/* ------------------------------------------------------------------------- */
-/* adap-pcf.h i2c driver algorithms for PCF8584 adapters                     */
-/* ------------------------------------------------------------------------- */
-/*   Copyright (C) 1995-97 Simon G. Vogl
-                   1998-99 Hans Berglund
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
-    MA 02110-1301 USA.							     */
-/* ------------------------------------------------------------------------- */
-
-/* With some changes from Kyösti Mälkki <kmalkki@cc.hut.fi> and even
-   Frodo Looijaard <frodol@dds.nl> */
-
-#ifndef _LINUX_I2C_ALGO_PCF_H
-#define _LINUX_I2C_ALGO_PCF_H
-
-struct i2c_algo_pcf_data {
-	void *data;		/* private data for lolevel routines	*/
-	void (*setpcf) (void *data, int ctl, int val);
-	int  (*getpcf) (void *data, int ctl);
-	int  (*getown) (void *data);
-	int  (*getclock) (void *data);
-	void (*waitforpin) (void *data);
-
-	void (*xfer_begin) (void *data);
-	void (*xfer_end) (void *data);
-
-	/* Multi-master lost arbitration back-off delay (msecs)
-	 * This should be set by the bus adapter or knowledgable client
-	 * if bus is multi-mastered, else zero
-	 */
-	unsigned long lab_mdelay;
-};
-
-int i2c_pcf_add_bus(struct i2c_adapter *);
-
-#endif /* _LINUX_I2C_ALGO_PCF_H */
diff --git a/ANDROID_3.4.5/include/linux/i2c-dev.h b/ANDROID_3.4.5/include/linux/i2c-dev.h
deleted file mode 100644
index 8a7406b2..00000000
--- a/ANDROID_3.4.5/include/linux/i2c-dev.h
+++ /dev/null
@@ -1,75 +0,0 @@
-/*
-    i2c-dev.h - i2c-bus driver, char device interface
-
-    Copyright (C) 1995-97 Simon G. Vogl
-    Copyright (C) 1998-99 Frodo Looijaard <frodol@dds.nl>
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
-    MA 02110-1301 USA.
-*/
-
-#ifndef _LINUX_I2C_DEV_H
-#define _LINUX_I2C_DEV_H
-
-#include <linux/types.h>
-#include <linux/compiler.h>
-
-/* /dev/i2c-X ioctl commands.  The ioctl's parameter is always an
- * unsigned long, except for:
- *	- I2C_FUNCS, takes pointer to an unsigned long
- *	- I2C_RDWR, takes pointer to struct i2c_rdwr_ioctl_data
- *	- I2C_SMBUS, takes pointer to struct i2c_smbus_ioctl_data
- */
-#define I2C_RETRIES	0x0701	/* number of times a device address should
-				   be polled when not acknowledging */
-#define I2C_TIMEOUT	0x0702	/* set timeout in units of 10 ms */
-
-/* NOTE: Slave address is 7 or 10 bits, but 10-bit addresses
- * are NOT supported! (due to code brokenness)
- */
-#define I2C_SLAVE	0x0703	/* Use this slave address */
-#define I2C_SLAVE_FORCE	0x0706	/* Use this slave address, even if it
-				   is already in use by a driver! */
-#define I2C_TENBIT	0x0704	/* 0 for 7 bit addrs, != 0 for 10 bit */
-
-#define I2C_FUNCS	0x0705	/* Get the adapter functionality mask */
-
-#define I2C_RDWR	0x0707	/* Combined R/W transfer (one STOP only) */
-
-#define I2C_PEC		0x0708	/* != 0 to use PEC with SMBus */
-#define I2C_SMBUS	0x0720	/* SMBus transfer */
-
-
-/* This is the structure as used in the I2C_SMBUS ioctl call */
-struct i2c_smbus_ioctl_data {
-	__u8 read_write;
-	__u8 command;
-	__u32 size;
-	union i2c_smbus_data __user *data;
-};
-
-/* This is the structure as used in the I2C_RDWR ioctl call */
-struct i2c_rdwr_ioctl_data {
-	struct i2c_msg __user *msgs;	/* pointers to i2c_msgs */
-	__u32 nmsgs;			/* number of i2c_msgs */
-};
-
-#define  I2C_RDRW_IOCTL_MAX_MSGS	42
-
-#ifdef __KERNEL__
-#define I2C_MAJOR	89		/* Device major number		*/
-#endif
-
-#endif /* _LINUX_I2C_DEV_H */
diff --git a/ANDROID_3.4.5/include/linux/i2c-gpio.h b/ANDROID_3.4.5/include/linux/i2c-gpio.h
deleted file mode 100644
index c1bcb1f1..00000000
--- a/ANDROID_3.4.5/include/linux/i2c-gpio.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- * i2c-gpio interface to platform code
- *
- * Copyright (C) 2007 Atmel Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef _LINUX_I2C_GPIO_H
-#define _LINUX_I2C_GPIO_H
-
-/**
- * struct i2c_gpio_platform_data - Platform-dependent data for i2c-gpio
- * @sda_pin: GPIO pin ID to use for SDA
- * @scl_pin: GPIO pin ID to use for SCL
- * @udelay: signal toggle delay. SCL frequency is (500 / udelay) kHz
- * @timeout: clock stretching timeout in jiffies. If the slave keeps
- *	SCL low for longer than this, the transfer will time out.
- * @sda_is_open_drain: SDA is configured as open drain, i.e. the pin
- *	isn't actively driven high when setting the output value high.
- *	gpio_get_value() must return the actual pin state even if the
- *	pin is configured as an output.
- * @scl_is_open_drain: SCL is set up as open drain. Same requirements
- *	as for sda_is_open_drain apply.
- * @scl_is_output_only: SCL output drivers cannot be turned off.
- */
-struct i2c_gpio_platform_data {
-	unsigned int	sda_pin;
-	unsigned int	scl_pin;
-	int		udelay;
-	int		timeout;
-	unsigned int	sda_is_open_drain:1;
-	unsigned int	scl_is_open_drain:1;
-	unsigned int	scl_is_output_only:1;
-};
-
-#endif /* _LINUX_I2C_GPIO_H */
diff --git a/ANDROID_3.4.5/include/linux/i2c-mux.h b/ANDROID_3.4.5/include/linux/i2c-mux.h
deleted file mode 100644
index 747f0cde..00000000
--- a/ANDROID_3.4.5/include/linux/i2c-mux.h
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- *
- * i2c-mux.h - functions for the i2c-bus mux support
- *
- * Copyright (c) 2008-2009 Rodolfo Giometti <giometti@linux.it>
- * Copyright (c) 2008-2009 Eurotech S.p.A. <info@eurotech.it>
- * Michael Lawnick <michael.lawnick.ext@nsn.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301 USA.
- */
-
-#ifndef _LINUX_I2C_MUX_H
-#define _LINUX_I2C_MUX_H
-
-#ifdef __KERNEL__
-
-/*
- * Called to create a i2c bus on a multiplexed bus segment.
- * The mux_dev and chan_id parameters are passed to the select
- * and deselect callback functions to perform hardware-specific
- * mux control.
- */
-struct i2c_adapter *i2c_add_mux_adapter(struct i2c_adapter *parent,
-				void *mux_dev, u32 force_nr, u32 chan_id,
-				int (*select) (struct i2c_adapter *,
-					       void *mux_dev, u32 chan_id),
-				int (*deselect) (struct i2c_adapter *,
-						 void *mux_dev, u32 chan_id));
-
-int i2c_del_mux_adapter(struct i2c_adapter *adap);
-
-#endif /* __KERNEL__ */
-
-#endif /* _LINUX_I2C_MUX_H */
diff --git a/ANDROID_3.4.5/include/linux/i2c-ocores.h b/ANDROID_3.4.5/include/linux/i2c-ocores.h
deleted file mode 100644
index 4d5e57ff..00000000
--- a/ANDROID_3.4.5/include/linux/i2c-ocores.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * i2c-ocores.h - definitions for the i2c-ocores interface
- *
- * Peter Korsgaard <jacmet@sunsite.dk>
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#ifndef _LINUX_I2C_OCORES_H
-#define _LINUX_I2C_OCORES_H
-
-struct ocores_i2c_platform_data {
-	u32 regstep;   /* distance between registers */
-	u32 clock_khz; /* input clock in kHz */
-	u8 num_devices; /* number of devices in the devices list */
-	struct i2c_board_info const *devices; /* devices connected to the bus */
-};
-
-#endif /* _LINUX_I2C_OCORES_H */
diff --git a/ANDROID_3.4.5/include/linux/i2c-omap.h b/ANDROID_3.4.5/include/linux/i2c-omap.h
deleted file mode 100644
index 92a0dc75..00000000
--- a/ANDROID_3.4.5/include/linux/i2c-omap.h
+++ /dev/null
@@ -1,40 +0,0 @@
-#ifndef __I2C_OMAP_H__
-#define __I2C_OMAP_H__
-
-#include <linux/platform_device.h>
-
-/*
- * Version 2 of the I2C peripheral unit has a different register
- * layout and extra registers.  The ID register in the V2 peripheral
- * unit on the OMAP4430 reports the same ID as the V1 peripheral
- * unit on the OMAP3530, so we must inform the driver which IP
- * version we know it is running on from platform / cpu-specific
- * code using these constants in the hwmod class definition.
- */
-
-#define OMAP_I2C_IP_VERSION_1 1
-#define OMAP_I2C_IP_VERSION_2 2
-
-/* struct omap_i2c_bus_platform_data .flags meanings */
-
-#define OMAP_I2C_FLAG_NO_FIFO			BIT(0)
-#define OMAP_I2C_FLAG_SIMPLE_CLOCK		BIT(1)
-#define OMAP_I2C_FLAG_16BIT_DATA_REG		BIT(2)
-#define OMAP_I2C_FLAG_RESET_REGS_POSTIDLE	BIT(3)
-#define OMAP_I2C_FLAG_APPLY_ERRATA_I207	BIT(4)
-#define OMAP_I2C_FLAG_ALWAYS_ARMXOR_CLK	BIT(5)
-#define OMAP_I2C_FLAG_FORCE_19200_INT_CLK	BIT(6)
-/* how the CPU address bus must be translated for I2C unit access */
-#define OMAP_I2C_FLAG_BUS_SHIFT_NONE 0
-#define OMAP_I2C_FLAG_BUS_SHIFT_1		BIT(7)
-#define OMAP_I2C_FLAG_BUS_SHIFT_2		BIT(8)
-#define OMAP_I2C_FLAG_BUS_SHIFT__SHIFT 7
-
-struct omap_i2c_bus_platform_data {
-	u32		clkrate;
-	u32		rev;
-	u32		flags;
-	void		(*set_mpu_wkup_lat)(struct device *dev, long set);
-};
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/i2c-pca-platform.h b/ANDROID_3.4.5/include/linux/i2c-pca-platform.h
deleted file mode 100644
index aba33759..00000000
--- a/ANDROID_3.4.5/include/linux/i2c-pca-platform.h
+++ /dev/null
@@ -1,12 +0,0 @@
-#ifndef I2C_PCA9564_PLATFORM_H
-#define I2C_PCA9564_PLATFORM_H
-
-struct i2c_pca9564_pf_platform_data {
-	int gpio;		/* pin to reset chip. driver will work when
-				 * not supplied (negative value), but it
-				 * cannot exit some error conditions then */
-	int i2c_clock_speed;	/* values are defined in linux/i2c-algo-pca.h */
-	int timeout;		/* timeout in jiffies */
-};
-
-#endif /* I2C_PCA9564_PLATFORM_H */
diff --git a/ANDROID_3.4.5/include/linux/i2c-pnx.h b/ANDROID_3.4.5/include/linux/i2c-pnx.h
deleted file mode 100644
index a87124d4..00000000
--- a/ANDROID_3.4.5/include/linux/i2c-pnx.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * Header file for I2C support on PNX010x/4008.
- *
- * Author: Dennis Kovalev <dkovalev@ru.mvista.com>
- *
- * 2004-2006 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#ifndef __I2C_PNX_H__
-#define __I2C_PNX_H__
-
-struct platform_device;
-struct clk;
-
-struct i2c_pnx_mif {
-	int			ret;		/* Return value */
-	int			mode;		/* Interface mode */
-	struct completion	complete;	/* I/O completion */
-	struct timer_list	timer;		/* Timeout */
-	u8 *			buf;		/* Data buffer */
-	int			len;		/* Length of data buffer */
-};
-
-struct i2c_pnx_algo_data {
-	void __iomem		*ioaddr;
-	struct i2c_pnx_mif	mif;
-	int			last;
-	struct clk		*clk;
-	struct i2c_pnx_data	*i2c_pnx;
-	struct i2c_adapter	adapter;
-};
-
-struct i2c_pnx_data {
-	const char *name;
-	u32 base;
-	int irq;
-};
-
-#endif /* __I2C_PNX_H__ */
diff --git a/ANDROID_3.4.5/include/linux/i2c-pxa.h b/ANDROID_3.4.5/include/linux/i2c-pxa.h
deleted file mode 100644
index 41dcdfe7..00000000
--- a/ANDROID_3.4.5/include/linux/i2c-pxa.h
+++ /dev/null
@@ -1,17 +0,0 @@
-#ifndef _LINUX_I2C_ALGO_PXA_H
-#define _LINUX_I2C_ALGO_PXA_H
-
-typedef enum i2c_slave_event_e {
-	I2C_SLAVE_EVENT_START_READ,
-	I2C_SLAVE_EVENT_START_WRITE,
-	I2C_SLAVE_EVENT_STOP
-} i2c_slave_event_t;
-
-struct i2c_slave_client {
-	void *data;
-	void (*event)(void *ptr, i2c_slave_event_t event);
-	int  (*read) (void *ptr);
-	void (*write)(void *ptr, unsigned int val);
-};
-
-#endif /* _LINUX_I2C_ALGO_PXA_H */
diff --git a/ANDROID_3.4.5/include/linux/i2c-smbus.h b/ANDROID_3.4.5/include/linux/i2c-smbus.h
deleted file mode 100644
index 017fb40f..00000000
--- a/ANDROID_3.4.5/include/linux/i2c-smbus.h
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
- * i2c-smbus.h - SMBus extensions to the I2C protocol
- *
- * Copyright (C) 2010 Jean Delvare <khali@linux-fr.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301 USA.
- */
-
-#ifndef _LINUX_I2C_SMBUS_H
-#define _LINUX_I2C_SMBUS_H
-
-#include <linux/i2c.h>
-
-
-/**
- * i2c_smbus_alert_setup - platform data for the smbus_alert i2c client
- * @alert_edge_triggered: whether the alert interrupt is edge (1) or level (0)
- *		triggered
- * @irq: IRQ number, if the smbus_alert driver should take care of interrupt
- *		handling
- *
- * If irq is not specified, the smbus_alert driver doesn't take care of
- * interrupt handling. In that case it is up to the I2C bus driver to either
- * handle the interrupts or to poll for alerts.
- *
- * If irq is specified then it it crucial that alert_edge_triggered is
- * properly set.
- */
-struct i2c_smbus_alert_setup {
-	unsigned int		alert_edge_triggered:1;
-	int			irq;
-};
-
-struct i2c_client *i2c_setup_smbus_alert(struct i2c_adapter *adapter,
-					 struct i2c_smbus_alert_setup *setup);
-int i2c_handle_smbus_alert(struct i2c_client *ara);
-
-#endif /* _LINUX_I2C_SMBUS_H */
diff --git a/ANDROID_3.4.5/include/linux/i2c-tegra.h b/ANDROID_3.4.5/include/linux/i2c-tegra.h
deleted file mode 100644
index 9c85da49..00000000
--- a/ANDROID_3.4.5/include/linux/i2c-tegra.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * drivers/i2c/busses/i2c-tegra.c
- *
- * Copyright (C) 2010 Google, Inc.
- * Author: Colin Cross <ccross@android.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef _LINUX_I2C_TEGRA_H
-#define _LINUX_I2C_TEGRA_H
-
-struct tegra_i2c_platform_data {
-	unsigned long bus_clk_rate;
-};
-
-#endif /* _LINUX_I2C_TEGRA_H */
diff --git a/ANDROID_3.4.5/include/linux/i2c-xiic.h b/ANDROID_3.4.5/include/linux/i2c-xiic.h
deleted file mode 100644
index 4f9f2256..00000000
--- a/ANDROID_3.4.5/include/linux/i2c-xiic.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * i2c-xiic.h
- * Copyright (c) 2009 Intel Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-/* Supports:
- * Xilinx IIC
- */
-
-#ifndef _LINUX_I2C_XIIC_H
-#define _LINUX_I2C_XIIC_H
-
-/**
- * struct xiic_i2c_platform_data - Platform data of the Xilinx I2C driver
- * @num_devices:	Number of devices that shall be added when the driver
- *			is probed.
- * @devices:		The actuall devices to add.
- *
- * This purpose of this platform data struct is to be able to provide a number
- * of devices that should be added to the I2C bus. The reason is that sometimes
- * the I2C board info is not enough, a new PCI board can for instance be
- * plugged into a standard PC, and the bus number might be unknown at
- * early init time.
- */
-struct xiic_i2c_platform_data {
-	u8				num_devices;
-	struct i2c_board_info const	*devices;
-};
-
-#endif /* _LINUX_I2C_XIIC_H */
diff --git a/ANDROID_3.4.5/include/linux/i2c.h b/ANDROID_3.4.5/include/linux/i2c.h
deleted file mode 100644
index 195d8b3d..00000000
--- a/ANDROID_3.4.5/include/linux/i2c.h
+++ /dev/null
@@ -1,619 +0,0 @@
-/* ------------------------------------------------------------------------- */
-/*									     */
-/* i2c.h - definitions for the i2c-bus interface			     */
-/*									     */
-/* ------------------------------------------------------------------------- */
-/*   Copyright (C) 1995-2000 Simon G. Vogl
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
-    MA 02110-1301 USA.							     */
-/* ------------------------------------------------------------------------- */
-
-/* With some changes from Kyösti Mälkki <kmalkki@cc.hut.fi> and
-   Frodo Looijaard <frodol@dds.nl> */
-
-#ifndef _LINUX_I2C_H
-#define _LINUX_I2C_H
-
-#include <linux/types.h>
-#ifdef __KERNEL__
-#include <linux/mod_devicetable.h>
-#include <linux/device.h>	/* for struct device */
-#include <linux/sched.h>	/* for completion */
-#include <linux/mutex.h>
-#include <linux/of.h>		/* for struct device_node */
-#include <linux/swab.h>		/* for swab16 */
-
-extern struct bus_type i2c_bus_type;
-extern struct device_type i2c_adapter_type;
-
-/* --- General options ------------------------------------------------	*/
-
-struct i2c_msg;
-struct i2c_algorithm;
-struct i2c_adapter;
-struct i2c_client;
-struct i2c_driver;
-union i2c_smbus_data;
-struct i2c_board_info;
-
-struct module;
-
-#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
-/*
- * The master routines are the ones normally used to transmit data to devices
- * on a bus (or read from them). Apart from two basic transfer functions to
- * transmit one message at a time, a more complex version can be used to
- * transmit an arbitrary number of messages without interruption.
- * @count must be be less than 64k since msg.len is u16.
- */
-extern int i2c_master_send(const struct i2c_client *client, const char *buf,
-			   int count);
-extern int i2c_master_recv(const struct i2c_client *client, char *buf,
-			   int count);
-
-/* Transfer num messages.
- */
-extern int i2c_transfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
-			int num);
-
-/* This is the very generalized SMBus access routine. You probably do not
-   want to use this, though; one of the functions below may be much easier,
-   and probably just as fast.
-   Note that we use i2c_adapter here, because you do not need a specific
-   smbus adapter to call this function. */
-extern s32 i2c_smbus_xfer(struct i2c_adapter *adapter, u16 addr,
-			  unsigned short flags, char read_write, u8 command,
-			  int size, union i2c_smbus_data *data);
-
-/* Now follow the 'nice' access routines. These also document the calling
-   conventions of i2c_smbus_xfer. */
-
-extern s32 i2c_smbus_read_byte(const struct i2c_client *client);
-extern s32 i2c_smbus_write_byte(const struct i2c_client *client, u8 value);
-extern s32 i2c_smbus_read_byte_data(const struct i2c_client *client,
-				    u8 command);
-extern s32 i2c_smbus_write_byte_data(const struct i2c_client *client,
-				     u8 command, u8 value);
-extern s32 i2c_smbus_read_word_data(const struct i2c_client *client,
-				    u8 command);
-extern s32 i2c_smbus_write_word_data(const struct i2c_client *client,
-				     u8 command, u16 value);
-
-static inline s32
-i2c_smbus_read_word_swapped(const struct i2c_client *client, u8 command)
-{
-	s32 value = i2c_smbus_read_word_data(client, command);
-
-	return (value < 0) ? value : swab16(value);
-}
-
-static inline s32
-i2c_smbus_write_word_swapped(const struct i2c_client *client,
-			     u8 command, u16 value)
-{
-	return i2c_smbus_write_word_data(client, command, swab16(value));
-}
-
-/* Returns the number of read bytes */
-extern s32 i2c_smbus_read_block_data(const struct i2c_client *client,
-				     u8 command, u8 *values);
-extern s32 i2c_smbus_write_block_data(const struct i2c_client *client,
-				      u8 command, u8 length, const u8 *values);
-/* Returns the number of read bytes */
-extern s32 i2c_smbus_read_i2c_block_data(const struct i2c_client *client,
-					 u8 command, u8 length, u8 *values);
-extern s32 i2c_smbus_write_i2c_block_data(const struct i2c_client *client,
-					  u8 command, u8 length,
-					  const u8 *values);
-#endif /* I2C */
-
-/**
- * struct i2c_driver - represent an I2C device driver
- * @class: What kind of i2c device we instantiate (for detect)
- * @attach_adapter: Callback for bus addition (deprecated)
- * @detach_adapter: Callback for bus removal (deprecated)
- * @probe: Callback for device binding
- * @remove: Callback for device unbinding
- * @shutdown: Callback for device shutdown
- * @suspend: Callback for device suspend
- * @resume: Callback for device resume
- * @alert: Alert callback, for example for the SMBus alert protocol
- * @command: Callback for bus-wide signaling (optional)
- * @driver: Device driver model driver
- * @id_table: List of I2C devices supported by this driver
- * @detect: Callback for device detection
- * @address_list: The I2C addresses to probe (for detect)
- * @clients: List of detected clients we created (for i2c-core use only)
- *
- * The driver.owner field should be set to the module owner of this driver.
- * The driver.name field should be set to the name of this driver.
- *
- * For automatic device detection, both @detect and @address_data must
- * be defined. @class should also be set, otherwise only devices forced
- * with module parameters will be created. The detect function must
- * fill at least the name field of the i2c_board_info structure it is
- * handed upon successful detection, and possibly also the flags field.
- *
- * If @detect is missing, the driver will still work fine for enumerated
- * devices. Detected devices simply won't be supported. This is expected
- * for the many I2C/SMBus devices which can't be detected reliably, and
- * the ones which can always be enumerated in practice.
- *
- * The i2c_client structure which is handed to the @detect callback is
- * not a real i2c_client. It is initialized just enough so that you can
- * call i2c_smbus_read_byte_data and friends on it. Don't do anything
- * else with it. In particular, calling dev_dbg and friends on it is
- * not allowed.
- */
-struct i2c_driver {
-	unsigned int class;
-
-	/* Notifies the driver that a new bus has appeared or is about to be
-	 * removed. You should avoid using this, it will be removed in a
-	 * near future.
-	 */
-	int (*attach_adapter)(struct i2c_adapter *) __deprecated;
-	int (*detach_adapter)(struct i2c_adapter *) __deprecated;
-
-	/* Standard driver model interfaces */
-	int (*probe)(struct i2c_client *, const struct i2c_device_id *);
-	int (*remove)(struct i2c_client *);
-
-	/* driver model interfaces that don't relate to enumeration  */
-	void (*shutdown)(struct i2c_client *);
-	int (*suspend)(struct i2c_client *, pm_message_t mesg);
-	int (*resume)(struct i2c_client *);
-
-	/* Alert callback, for example for the SMBus alert protocol.
-	 * The format and meaning of the data value depends on the protocol.
-	 * For the SMBus alert protocol, there is a single bit of data passed
-	 * as the alert response's low bit ("event flag").
-	 */
-	void (*alert)(struct i2c_client *, unsigned int data);
-
-	/* a ioctl like command that can be used to perform specific functions
-	 * with the device.
-	 */
-	int (*command)(struct i2c_client *client, unsigned int cmd, void *arg);
-
-	struct device_driver driver;
-	const struct i2c_device_id *id_table;
-
-	/* Device detection callback for automatic device creation */
-	int (*detect)(struct i2c_client *, struct i2c_board_info *);
-	const unsigned short *address_list;
-	struct list_head clients;
-};
-#define to_i2c_driver(d) container_of(d, struct i2c_driver, driver)
-
-/**
- * struct i2c_client - represent an I2C slave device
- * @flags: I2C_CLIENT_TEN indicates the device uses a ten bit chip address;
- *	I2C_CLIENT_PEC indicates it uses SMBus Packet Error Checking
- * @addr: Address used on the I2C bus connected to the parent adapter.
- * @name: Indicates the type of the device, usually a chip name that's
- *	generic enough to hide second-sourcing and compatible revisions.
- * @adapter: manages the bus segment hosting this I2C device
- * @driver: device's driver, hence pointer to access routines
- * @dev: Driver model device node for the slave.
- * @irq: indicates the IRQ generated by this device (if any)
- * @detected: member of an i2c_driver.clients list or i2c-core's
- *	userspace_devices list
- *
- * An i2c_client identifies a single device (i.e. chip) connected to an
- * i2c bus. The behaviour exposed to Linux is defined by the driver
- * managing the device.
- */
-struct i2c_client {
-	unsigned short flags;		/* div., see below		*/
-	unsigned short addr;		/* chip address - NOTE: 7bit	*/
-					/* addresses are stored in the	*/
-					/* _LOWER_ 7 bits		*/
-	char name[I2C_NAME_SIZE];
-	struct i2c_adapter *adapter;	/* the adapter we sit on	*/
-	struct i2c_driver *driver;	/* and our access routines	*/
-	struct device dev;		/* the device structure		*/
-	int irq;			/* irq issued by device		*/
-	struct list_head detected;
-};
-#define to_i2c_client(d) container_of(d, struct i2c_client, dev)
-
-extern struct i2c_client *i2c_verify_client(struct device *dev);
-
-static inline struct i2c_client *kobj_to_i2c_client(struct kobject *kobj)
-{
-	struct device * const dev = container_of(kobj, struct device, kobj);
-	return to_i2c_client(dev);
-}
-
-static inline void *i2c_get_clientdata(const struct i2c_client *dev)
-{
-	return dev_get_drvdata(&dev->dev);
-}
-
-static inline void i2c_set_clientdata(struct i2c_client *dev, void *data)
-{
-	dev_set_drvdata(&dev->dev, data);
-}
-
-/**
- * struct i2c_board_info - template for device creation
- * @type: chip type, to initialize i2c_client.name
- * @flags: to initialize i2c_client.flags
- * @addr: stored in i2c_client.addr
- * @platform_data: stored in i2c_client.dev.platform_data
- * @archdata: copied into i2c_client.dev.archdata
- * @of_node: pointer to OpenFirmware device node
- * @irq: stored in i2c_client.irq
- *
- * I2C doesn't actually support hardware probing, although controllers and
- * devices may be able to use I2C_SMBUS_QUICK to tell whether or not there's
- * a device at a given address.  Drivers commonly need more information than
- * that, such as chip type, configuration, associated IRQ, and so on.
- *
- * i2c_board_info is used to build tables of information listing I2C devices
- * that are present.  This information is used to grow the driver model tree.
- * For mainboards this is done statically using i2c_register_board_info();
- * bus numbers identify adapters that aren't yet available.  For add-on boards,
- * i2c_new_device() does this dynamically with the adapter already known.
- */
-struct i2c_board_info {
-	char		type[I2C_NAME_SIZE];
-	unsigned short	flags;
-	unsigned short	addr;
-	void		*platform_data;
-	struct dev_archdata	*archdata;
-	struct device_node *of_node;
-	int		irq;
-};
-
-/**
- * I2C_BOARD_INFO - macro used to list an i2c device and its address
- * @dev_type: identifies the device type
- * @dev_addr: the device's address on the bus.
- *
- * This macro initializes essential fields of a struct i2c_board_info,
- * declaring what has been provided on a particular board.  Optional
- * fields (such as associated irq, or device-specific platform_data)
- * are provided using conventional syntax.
- */
-#define I2C_BOARD_INFO(dev_type, dev_addr) \
-	.type = dev_type, .addr = (dev_addr)
-
-
-#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
-/* Add-on boards should register/unregister their devices; e.g. a board
- * with integrated I2C, a config eeprom, sensors, and a codec that's
- * used in conjunction with the primary hardware.
- */
-extern struct i2c_client *
-i2c_new_device(struct i2c_adapter *adap, struct i2c_board_info const *info);
-
-/* If you don't know the exact address of an I2C device, use this variant
- * instead, which can probe for device presence in a list of possible
- * addresses. The "probe" callback function is optional. If it is provided,
- * it must return 1 on successful probe, 0 otherwise. If it is not provided,
- * a default probing method is used.
- */
-extern struct i2c_client *
-i2c_new_probed_device(struct i2c_adapter *adap,
-		      struct i2c_board_info *info,
-		      unsigned short const *addr_list,
-		      int (*probe)(struct i2c_adapter *, unsigned short addr));
-
-/* Common custom probe functions */
-extern int i2c_probe_func_quick_read(struct i2c_adapter *, unsigned short addr);
-
-/* For devices that use several addresses, use i2c_new_dummy() to make
- * client handles for the extra addresses.
- */
-extern struct i2c_client *
-i2c_new_dummy(struct i2c_adapter *adap, u16 address);
-
-extern void i2c_unregister_device(struct i2c_client *);
-#endif /* I2C */
-
-/* Mainboard arch_initcall() code should register all its I2C devices.
- * This is done at arch_initcall time, before declaring any i2c adapters.
- * Modules for add-on boards must use other calls.
- */
-#ifdef CONFIG_I2C_BOARDINFO
-extern int
-i2c_register_board_info(int busnum, struct i2c_board_info const *info,
-			unsigned n);
-#else
-static inline int
-i2c_register_board_info(int busnum, struct i2c_board_info const *info,
-			unsigned n)
-{
-	return 0;
-}
-#endif /* I2C_BOARDINFO */
-
-/*
- * The following structs are for those who like to implement new bus drivers:
- * i2c_algorithm is the interface to a class of hardware solutions which can
- * be addressed using the same bus algorithms - i.e. bit-banging or the PCF8584
- * to name two of the most common.
- */
-struct i2c_algorithm {
-	/* If an adapter algorithm can't do I2C-level access, set master_xfer
-	   to NULL. If an adapter algorithm can do SMBus access, set
-	   smbus_xfer. If set to NULL, the SMBus protocol is simulated
-	   using common I2C messages */
-	/* master_xfer should return the number of messages successfully
-	   processed, or a negative value on error */
-	int (*master_xfer)(struct i2c_adapter *adap, struct i2c_msg *msgs,
-			   int num);
-	int (*smbus_xfer) (struct i2c_adapter *adap, u16 addr,
-			   unsigned short flags, char read_write,
-			   u8 command, int size, union i2c_smbus_data *data);
-
-	/* To determine what the adapter supports */
-	u32 (*functionality) (struct i2c_adapter *);
-};
-
-/*
- * i2c_adapter is the structure used to identify a physical i2c bus along
- * with the access algorithms necessary to access it.
- */
-struct i2c_adapter {
-	struct module *owner;
-	unsigned int class;		  /* classes to allow probing for */
-	const struct i2c_algorithm *algo; /* the algorithm to access the bus */
-	void *algo_data;
-
-	/* data fields that are valid for all devices	*/
-	struct rt_mutex bus_lock;
-
-	int timeout;			/* in jiffies */
-	int retries;
-	struct device dev;		/* the adapter device */
-
-	int nr;
-	char name[48];
-	struct completion dev_released;
-
-	struct mutex userspace_clients_lock;
-	struct list_head userspace_clients;
-};
-#define to_i2c_adapter(d) container_of(d, struct i2c_adapter, dev)
-
-static inline void *i2c_get_adapdata(const struct i2c_adapter *dev)
-{
-	return dev_get_drvdata(&dev->dev);
-}
-
-static inline void i2c_set_adapdata(struct i2c_adapter *dev, void *data)
-{
-	dev_set_drvdata(&dev->dev, data);
-}
-
-static inline struct i2c_adapter *
-i2c_parent_is_i2c_adapter(const struct i2c_adapter *adapter)
-{
-	struct device *parent = adapter->dev.parent;
-
-	if (parent != NULL && parent->type == &i2c_adapter_type)
-		return to_i2c_adapter(parent);
-	else
-		return NULL;
-}
-
-int i2c_for_each_dev(void *data, int (*fn)(struct device *, void *));
-
-/* Adapter locking functions, exported for shared pin cases */
-void i2c_lock_adapter(struct i2c_adapter *);
-void i2c_unlock_adapter(struct i2c_adapter *);
-
-/*flags for the client struct: */
-#define I2C_CLIENT_PEC	0x04		/* Use Packet Error Checking */
-#define I2C_CLIENT_TEN	0x10		/* we have a ten bit chip address */
-					/* Must equal I2C_M_TEN below */
-#define I2C_CLIENT_WAKE	0x80		/* for board_info; true iff can wake */
-
-/* i2c adapter classes (bitmask) */
-#define I2C_CLASS_HWMON		(1<<0)	/* lm_sensors, ... */
-#define I2C_CLASS_DDC		(1<<3)	/* DDC bus on graphics adapters */
-#define I2C_CLASS_SPD		(1<<7)	/* Memory modules */
-
-/* Internal numbers to terminate lists */
-#define I2C_CLIENT_END		0xfffeU
-
-/* Construct an I2C_CLIENT_END-terminated array of i2c addresses */
-#define I2C_ADDRS(addr, addrs...) \
-	((const unsigned short []){ addr, ## addrs, I2C_CLIENT_END })
-
-
-/* ----- functions exported by i2c.o */
-
-/* administration...
- */
-#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
-extern int i2c_add_adapter(struct i2c_adapter *);
-extern int i2c_del_adapter(struct i2c_adapter *);
-extern int i2c_add_numbered_adapter(struct i2c_adapter *);
-
-extern int i2c_register_driver(struct module *, struct i2c_driver *);
-extern void i2c_del_driver(struct i2c_driver *);
-
-/* use a define to avoid include chaining to get THIS_MODULE */
-#define i2c_add_driver(driver) \
-	i2c_register_driver(THIS_MODULE, driver)
-
-extern struct i2c_client *i2c_use_client(struct i2c_client *client);
-extern void i2c_release_client(struct i2c_client *client);
-
-/* call the i2c_client->command() of all attached clients with
- * the given arguments */
-extern void i2c_clients_command(struct i2c_adapter *adap,
-				unsigned int cmd, void *arg);
-
-extern struct i2c_adapter *i2c_get_adapter(int nr);
-extern void i2c_put_adapter(struct i2c_adapter *adap);
-
-
-/* Return the functionality mask */
-static inline u32 i2c_get_functionality(struct i2c_adapter *adap)
-{
-	return adap->algo->functionality(adap);
-}
-
-/* Return 1 if adapter supports everything we need, 0 if not. */
-static inline int i2c_check_functionality(struct i2c_adapter *adap, u32 func)
-{
-	return (func & i2c_get_functionality(adap)) == func;
-}
-
-/* Return the adapter number for a specific adapter */
-static inline int i2c_adapter_id(struct i2c_adapter *adap)
-{
-	return adap->nr;
-}
-
-/**
- * module_i2c_driver() - Helper macro for registering a I2C driver
- * @__i2c_driver: i2c_driver struct
- *
- * Helper macro for I2C drivers which do not do anything special in module
- * init/exit. This eliminates a lot of boilerplate. Each module may only
- * use this macro once, and calling it replaces module_init() and module_exit()
- */
-#define module_i2c_driver(__i2c_driver) \
-	module_driver(__i2c_driver, i2c_add_driver, \
-			i2c_del_driver)
-
-#endif /* I2C */
-#endif /* __KERNEL__ */
-
-/**
- * struct i2c_msg - an I2C transaction segment beginning with START
- * @addr: Slave address, either seven or ten bits.  When this is a ten
- *	bit address, I2C_M_TEN must be set in @flags and the adapter
- *	must support I2C_FUNC_10BIT_ADDR.
- * @flags: I2C_M_RD is handled by all adapters.  No other flags may be
- *	provided unless the adapter exported the relevant I2C_FUNC_*
- *	flags through i2c_check_functionality().
- * @len: Number of data bytes in @buf being read from or written to the
- *	I2C slave address.  For read transactions where I2C_M_RECV_LEN
- *	is set, the caller guarantees that this buffer can hold up to
- *	32 bytes in addition to the initial length byte sent by the
- *	slave (plus, if used, the SMBus PEC); and this value will be
- *	incremented by the number of block data bytes received.
- * @buf: The buffer into which data is read, or from which it's written.
- *
- * An i2c_msg is the low level representation of one segment of an I2C
- * transaction.  It is visible to drivers in the @i2c_transfer() procedure,
- * to userspace from i2c-dev, and to I2C adapter drivers through the
- * @i2c_adapter.@master_xfer() method.
- *
- * Except when I2C "protocol mangling" is used, all I2C adapters implement
- * the standard rules for I2C transactions.  Each transaction begins with a
- * START.  That is followed by the slave address, and a bit encoding read
- * versus write.  Then follow all the data bytes, possibly including a byte
- * with SMBus PEC.  The transfer terminates with a NAK, or when all those
- * bytes have been transferred and ACKed.  If this is the last message in a
- * group, it is followed by a STOP.  Otherwise it is followed by the next
- * @i2c_msg transaction segment, beginning with a (repeated) START.
- *
- * Alternatively, when the adapter supports I2C_FUNC_PROTOCOL_MANGLING then
- * passing certain @flags may have changed those standard protocol behaviors.
- * Those flags are only for use with broken/nonconforming slaves, and with
- * adapters which are known to support the specific mangling options they
- * need (one or more of IGNORE_NAK, NO_RD_ACK, NOSTART, and REV_DIR_ADDR).
- */
-struct i2c_msg {
-	__u16 addr;	/* slave address			*/
-	__u16 flags;
-#define I2C_M_TEN		0x0010	/* this is a ten bit chip address */
-#define I2C_M_RD		0x0001	/* read data, from slave to master */
-#define I2C_M_NOSTART		0x4000	/* if I2C_FUNC_PROTOCOL_MANGLING */
-#define I2C_M_REV_DIR_ADDR	0x2000	/* if I2C_FUNC_PROTOCOL_MANGLING */
-#define I2C_M_IGNORE_NAK	0x1000	/* if I2C_FUNC_PROTOCOL_MANGLING */
-#define I2C_M_NO_RD_ACK		0x0800	/* if I2C_FUNC_PROTOCOL_MANGLING */
-#define I2C_M_RECV_LEN		0x0400	/* length will be first received byte */
-	__u16 len;		/* msg length				*/
-	__u8 *buf;		/* pointer to msg data			*/
-};
-
-/* To determine what functionality is present */
-
-#define I2C_FUNC_I2C			0x00000001
-#define I2C_FUNC_10BIT_ADDR		0x00000002
-#define I2C_FUNC_PROTOCOL_MANGLING	0x00000004 /* I2C_M_NOSTART etc. */
-#define I2C_FUNC_SMBUS_PEC		0x00000008
-#define I2C_FUNC_SMBUS_BLOCK_PROC_CALL	0x00008000 /* SMBus 2.0 */
-#define I2C_FUNC_SMBUS_QUICK		0x00010000
-#define I2C_FUNC_SMBUS_READ_BYTE	0x00020000
-#define I2C_FUNC_SMBUS_WRITE_BYTE	0x00040000
-#define I2C_FUNC_SMBUS_READ_BYTE_DATA	0x00080000
-#define I2C_FUNC_SMBUS_WRITE_BYTE_DATA	0x00100000
-#define I2C_FUNC_SMBUS_READ_WORD_DATA	0x00200000
-#define I2C_FUNC_SMBUS_WRITE_WORD_DATA	0x00400000
-#define I2C_FUNC_SMBUS_PROC_CALL	0x00800000
-#define I2C_FUNC_SMBUS_READ_BLOCK_DATA	0x01000000
-#define I2C_FUNC_SMBUS_WRITE_BLOCK_DATA 0x02000000
-#define I2C_FUNC_SMBUS_READ_I2C_BLOCK	0x04000000 /* I2C-like block xfer  */
-#define I2C_FUNC_SMBUS_WRITE_I2C_BLOCK	0x08000000 /* w/ 1-byte reg. addr. */
-
-#define I2C_FUNC_SMBUS_BYTE		(I2C_FUNC_SMBUS_READ_BYTE | \
-					 I2C_FUNC_SMBUS_WRITE_BYTE)
-#define I2C_FUNC_SMBUS_BYTE_DATA	(I2C_FUNC_SMBUS_READ_BYTE_DATA | \
-					 I2C_FUNC_SMBUS_WRITE_BYTE_DATA)
-#define I2C_FUNC_SMBUS_WORD_DATA	(I2C_FUNC_SMBUS_READ_WORD_DATA | \
-					 I2C_FUNC_SMBUS_WRITE_WORD_DATA)
-#define I2C_FUNC_SMBUS_BLOCK_DATA	(I2C_FUNC_SMBUS_READ_BLOCK_DATA | \
-					 I2C_FUNC_SMBUS_WRITE_BLOCK_DATA)
-#define I2C_FUNC_SMBUS_I2C_BLOCK	(I2C_FUNC_SMBUS_READ_I2C_BLOCK | \
-					 I2C_FUNC_SMBUS_WRITE_I2C_BLOCK)
-
-#define I2C_FUNC_SMBUS_EMUL		(I2C_FUNC_SMBUS_QUICK | \
-					 I2C_FUNC_SMBUS_BYTE | \
-					 I2C_FUNC_SMBUS_BYTE_DATA | \
-					 I2C_FUNC_SMBUS_WORD_DATA | \
-					 I2C_FUNC_SMBUS_PROC_CALL | \
-					 I2C_FUNC_SMBUS_WRITE_BLOCK_DATA | \
-					 I2C_FUNC_SMBUS_I2C_BLOCK | \
-					 I2C_FUNC_SMBUS_PEC)
-
-/*
- * Data for SMBus Messages
- */
-#define I2C_SMBUS_BLOCK_MAX	32	/* As specified in SMBus standard */
-union i2c_smbus_data {
-	__u8 byte;
-	__u16 word;
-	__u8 block[I2C_SMBUS_BLOCK_MAX + 2]; /* block[0] is used for length */
-			       /* and one more for user-space compatibility */
-};
-
-/* i2c_smbus_xfer read or write markers */
-#define I2C_SMBUS_READ	1
-#define I2C_SMBUS_WRITE	0
-
-/* SMBus transaction types (size parameter in the above functions)
-   Note: these no longer correspond to the (arbitrary) PIIX4 internal codes! */
-#define I2C_SMBUS_QUICK		    0
-#define I2C_SMBUS_BYTE		    1
-#define I2C_SMBUS_BYTE_DATA	    2
-#define I2C_SMBUS_WORD_DATA	    3
-#define I2C_SMBUS_PROC_CALL	    4
-#define I2C_SMBUS_BLOCK_DATA	    5
-#define I2C_SMBUS_I2C_BLOCK_BROKEN  6
-#define I2C_SMBUS_BLOCK_PROC_CALL   7		/* SMBus 2.0 */
-#define I2C_SMBUS_I2C_BLOCK_DATA    8
-
-#endif /* _LINUX_I2C_H */
diff --git a/ANDROID_3.4.5/include/linux/i2c/adp5588.h b/ANDROID_3.4.5/include/linux/i2c/adp5588.h
deleted file mode 100644
index cec17cf6..00000000
--- a/ANDROID_3.4.5/include/linux/i2c/adp5588.h
+++ /dev/null
@@ -1,171 +0,0 @@
-/*
- * Analog Devices ADP5588 I/O Expander and QWERTY Keypad Controller
- *
- * Copyright 2009-2010 Analog Devices Inc.
- *
- * Licensed under the GPL-2 or later.
- */
-
-#ifndef _ADP5588_H
-#define _ADP5588_H
-
-#define DEV_ID 0x00		/* Device ID */
-#define CFG 0x01		/* Configuration Register1 */
-#define INT_STAT 0x02		/* Interrupt Status Register */
-#define KEY_LCK_EC_STAT 0x03	/* Key Lock and Event Counter Register */
-#define Key_EVENTA 0x04		/* Key Event Register A */
-#define Key_EVENTB 0x05		/* Key Event Register B */
-#define Key_EVENTC 0x06		/* Key Event Register C */
-#define Key_EVENTD 0x07		/* Key Event Register D */
-#define Key_EVENTE 0x08		/* Key Event Register E */
-#define Key_EVENTF 0x09		/* Key Event Register F */
-#define Key_EVENTG 0x0A		/* Key Event Register G */
-#define Key_EVENTH 0x0B		/* Key Event Register H */
-#define Key_EVENTI 0x0C		/* Key Event Register I */
-#define Key_EVENTJ 0x0D		/* Key Event Register J */
-#define KP_LCK_TMR 0x0E		/* Keypad Lock1 to Lock2 Timer */
-#define UNLOCK1 0x0F		/* Unlock Key1 */
-#define UNLOCK2 0x10		/* Unlock Key2 */
-#define GPIO_INT_STAT1 0x11	/* GPIO Interrupt Status */
-#define GPIO_INT_STAT2 0x12	/* GPIO Interrupt Status */
-#define GPIO_INT_STAT3 0x13	/* GPIO Interrupt Status */
-#define GPIO_DAT_STAT1 0x14	/* GPIO Data Status, Read twice to clear */
-#define GPIO_DAT_STAT2 0x15	/* GPIO Data Status, Read twice to clear */
-#define GPIO_DAT_STAT3 0x16	/* GPIO Data Status, Read twice to clear */
-#define GPIO_DAT_OUT1 0x17	/* GPIO DATA OUT */
-#define GPIO_DAT_OUT2 0x18	/* GPIO DATA OUT */
-#define GPIO_DAT_OUT3 0x19	/* GPIO DATA OUT */
-#define GPIO_INT_EN1 0x1A	/* GPIO Interrupt Enable */
-#define GPIO_INT_EN2 0x1B	/* GPIO Interrupt Enable */
-#define GPIO_INT_EN3 0x1C	/* GPIO Interrupt Enable */
-#define KP_GPIO1 0x1D		/* Keypad or GPIO Selection */
-#define KP_GPIO2 0x1E		/* Keypad or GPIO Selection */
-#define KP_GPIO3 0x1F		/* Keypad or GPIO Selection */
-#define GPI_EM1 0x20		/* GPI Event Mode 1 */
-#define GPI_EM2 0x21		/* GPI Event Mode 2 */
-#define GPI_EM3 0x22		/* GPI Event Mode 3 */
-#define GPIO_DIR1 0x23		/* GPIO Data Direction */
-#define GPIO_DIR2 0x24		/* GPIO Data Direction */
-#define GPIO_DIR3 0x25		/* GPIO Data Direction */
-#define GPIO_INT_LVL1 0x26	/* GPIO Edge/Level Detect */
-#define GPIO_INT_LVL2 0x27	/* GPIO Edge/Level Detect */
-#define GPIO_INT_LVL3 0x28	/* GPIO Edge/Level Detect */
-#define Debounce_DIS1 0x29	/* Debounce Disable */
-#define Debounce_DIS2 0x2A	/* Debounce Disable */
-#define Debounce_DIS3 0x2B	/* Debounce Disable */
-#define GPIO_PULL1 0x2C		/* GPIO Pull Disable */
-#define GPIO_PULL2 0x2D		/* GPIO Pull Disable */
-#define GPIO_PULL3 0x2E		/* GPIO Pull Disable */
-#define CMP_CFG_STAT 0x30	/* Comparator Configuration and Status Register */
-#define CMP_CONFG_SENS1 0x31	/* Sensor1 Comparator Configuration Register */
-#define CMP_CONFG_SENS2 0x32	/* L2 Light Sensor Reference Level, Output Falling for Sensor 1 */
-#define CMP1_LVL2_TRIP 0x33	/* L2 Light Sensor Hysteresis (Active when Output Rising) for Sensor 1 */
-#define CMP1_LVL2_HYS 0x34	/* L3 Light Sensor Reference Level, Output Falling For Sensor 1 */
-#define CMP1_LVL3_TRIP 0x35	/* L3 Light Sensor Hysteresis (Active when Output Rising) For Sensor 1 */
-#define CMP1_LVL3_HYS 0x36	/* Sensor 2 Comparator Configuration Register */
-#define CMP2_LVL2_TRIP 0x37	/* L2 Light Sensor Reference Level, Output Falling for Sensor 2 */
-#define CMP2_LVL2_HYS 0x38	/* L2 Light Sensor Hysteresis (Active when Output Rising) for Sensor 2 */
-#define CMP2_LVL3_TRIP 0x39	/* L3 Light Sensor Reference Level, Output Falling For Sensor 2 */
-#define CMP2_LVL3_HYS 0x3A	/* L3 Light Sensor Hysteresis (Active when Output Rising) For Sensor 2 */
-#define CMP1_ADC_DAT_R1 0x3B	/* Comparator 1 ADC data Register1 */
-#define CMP1_ADC_DAT_R2 0x3C	/* Comparator 1 ADC data Register2 */
-#define CMP2_ADC_DAT_R1 0x3D	/* Comparator 2 ADC data Register1 */
-#define CMP2_ADC_DAT_R2 0x3E	/* Comparator 2 ADC data Register2 */
-
-#define ADP5588_DEVICE_ID_MASK	0xF
-
- /* Configuration Register1 */
-#define ADP5588_AUTO_INC	(1 << 7)
-#define ADP5588_GPIEM_CFG	(1 << 6)
-#define ADP5588_OVR_FLOW_M	(1 << 5)
-#define ADP5588_INT_CFG		(1 << 4)
-#define ADP5588_OVR_FLOW_IEN	(1 << 3)
-#define ADP5588_K_LCK_IM	(1 << 2)
-#define ADP5588_GPI_IEN		(1 << 1)
-#define ADP5588_KE_IEN		(1 << 0)
-
-/* Interrupt Status Register */
-#define ADP5588_CMP2_INT	(1 << 5)
-#define ADP5588_CMP1_INT	(1 << 4)
-#define ADP5588_OVR_FLOW_INT	(1 << 3)
-#define ADP5588_K_LCK_INT	(1 << 2)
-#define ADP5588_GPI_INT		(1 << 1)
-#define ADP5588_KE_INT		(1 << 0)
-
-/* Key Lock and Event Counter Register */
-#define ADP5588_K_LCK_EN	(1 << 6)
-#define ADP5588_LCK21		0x30
-#define ADP5588_KEC		0xF
-
-#define ADP5588_MAXGPIO		18
-#define ADP5588_BANK(offs)	((offs) >> 3)
-#define ADP5588_BIT(offs)	(1u << ((offs) & 0x7))
-
-/* Put one of these structures in i2c_board_info platform_data */
-
-#define ADP5588_KEYMAPSIZE	80
-
-#define GPI_PIN_ROW0 97
-#define GPI_PIN_ROW1 98
-#define GPI_PIN_ROW2 99
-#define GPI_PIN_ROW3 100
-#define GPI_PIN_ROW4 101
-#define GPI_PIN_ROW5 102
-#define GPI_PIN_ROW6 103
-#define GPI_PIN_ROW7 104
-#define GPI_PIN_COL0 105
-#define GPI_PIN_COL1 106
-#define GPI_PIN_COL2 107
-#define GPI_PIN_COL3 108
-#define GPI_PIN_COL4 109
-#define GPI_PIN_COL5 110
-#define GPI_PIN_COL6 111
-#define GPI_PIN_COL7 112
-#define GPI_PIN_COL8 113
-#define GPI_PIN_COL9 114
-
-#define GPI_PIN_ROW_BASE GPI_PIN_ROW0
-#define GPI_PIN_ROW_END GPI_PIN_ROW7
-#define GPI_PIN_COL_BASE GPI_PIN_COL0
-#define GPI_PIN_COL_END GPI_PIN_COL9
-
-#define GPI_PIN_BASE GPI_PIN_ROW_BASE
-#define GPI_PIN_END GPI_PIN_COL_END
-
-#define ADP5588_GPIMAPSIZE_MAX (GPI_PIN_END - GPI_PIN_BASE + 1)
-
-struct adp5588_gpi_map {
-	unsigned short pin;
-	unsigned short sw_evt;
-};
-
-struct adp5588_kpad_platform_data {
-	int rows;			/* Number of rows */
-	int cols;			/* Number of columns */
-	const unsigned short *keymap;	/* Pointer to keymap */
-	unsigned short keymapsize;	/* Keymap size */
-	unsigned repeat:1;		/* Enable key repeat */
-	unsigned en_keylock:1;		/* Enable Key Lock feature */
-	unsigned short unlock_key1;	/* Unlock Key 1 */
-	unsigned short unlock_key2;	/* Unlock Key 2 */
-	const struct adp5588_gpi_map *gpimap;
-	unsigned short gpimapsize;
-	const struct adp5588_gpio_platform_data *gpio_data;
-};
-
-struct i2c_client; /* forward declaration */
-
-struct adp5588_gpio_platform_data {
-	int gpio_start;		/* GPIO Chip base # */
-	unsigned irq_base;	/* interrupt base # */
-	unsigned pullup_dis_mask; /* Pull-Up Disable Mask */
-	int	(*setup)(struct i2c_client *client,
-				int gpio, unsigned ngpio,
-				void *context);
-	int	(*teardown)(struct i2c_client *client,
-				int gpio, unsigned ngpio,
-				void *context);
-	void	*context;
-};
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/i2c/adp8860.h b/ANDROID_3.4.5/include/linux/i2c/adp8860.h
deleted file mode 100644
index 0b4d3985..00000000
--- a/ANDROID_3.4.5/include/linux/i2c/adp8860.h
+++ /dev/null
@@ -1,154 +0,0 @@
-/*
- * Definitions and platform data for Analog Devices
- * Backlight drivers ADP8860
- *
- * Copyright 2009-2010 Analog Devices Inc.
- *
- * Licensed under the GPL-2 or later.
- */
-
-#ifndef __LINUX_I2C_ADP8860_H
-#define __LINUX_I2C_ADP8860_H
-
-#include <linux/leds.h>
-#include <linux/types.h>
-
-#define ID_ADP8860		8860
-
-#define ADP8860_MAX_BRIGHTNESS	0x7F
-#define FLAG_OFFT_SHIFT 8
-
-/*
- * LEDs subdevice platform data
- */
-
-#define ADP8860_LED_DIS_BLINK	(0 << FLAG_OFFT_SHIFT)
-#define ADP8860_LED_OFFT_600ms	(1 << FLAG_OFFT_SHIFT)
-#define ADP8860_LED_OFFT_1200ms	(2 << FLAG_OFFT_SHIFT)
-#define ADP8860_LED_OFFT_1800ms	(3 << FLAG_OFFT_SHIFT)
-
-#define ADP8860_LED_ONT_200ms	0
-#define ADP8860_LED_ONT_600ms	1
-#define ADP8860_LED_ONT_800ms	2
-#define ADP8860_LED_ONT_1200ms	3
-
-#define ADP8860_LED_D7		(7)
-#define ADP8860_LED_D6		(6)
-#define ADP8860_LED_D5		(5)
-#define ADP8860_LED_D4		(4)
-#define ADP8860_LED_D3		(3)
-#define ADP8860_LED_D2		(2)
-#define ADP8860_LED_D1		(1)
-
-/*
- * Backlight subdevice platform data
- */
-
-#define ADP8860_BL_D7		(1 << 6)
-#define ADP8860_BL_D6		(1 << 5)
-#define ADP8860_BL_D5		(1 << 4)
-#define ADP8860_BL_D4		(1 << 3)
-#define ADP8860_BL_D3		(1 << 2)
-#define ADP8860_BL_D2		(1 << 1)
-#define ADP8860_BL_D1		(1 << 0)
-
-#define ADP8860_FADE_T_DIS	0	/* Fade Timer Disabled */
-#define ADP8860_FADE_T_300ms	1	/* 0.3 Sec */
-#define ADP8860_FADE_T_600ms	2
-#define ADP8860_FADE_T_900ms	3
-#define ADP8860_FADE_T_1200ms	4
-#define ADP8860_FADE_T_1500ms	5
-#define ADP8860_FADE_T_1800ms	6
-#define ADP8860_FADE_T_2100ms	7
-#define ADP8860_FADE_T_2400ms	8
-#define ADP8860_FADE_T_2700ms	9
-#define ADP8860_FADE_T_3000ms	10
-#define ADP8860_FADE_T_3500ms	11
-#define ADP8860_FADE_T_4000ms	12
-#define ADP8860_FADE_T_4500ms	13
-#define ADP8860_FADE_T_5000ms	14
-#define ADP8860_FADE_T_5500ms	15	/* 5.5 Sec */
-
-#define ADP8860_FADE_LAW_LINEAR	0
-#define ADP8860_FADE_LAW_SQUARE	1
-#define ADP8860_FADE_LAW_CUBIC1	2
-#define ADP8860_FADE_LAW_CUBIC2	3
-
-#define ADP8860_BL_AMBL_FILT_80ms	0	/* Light sensor filter time */
-#define ADP8860_BL_AMBL_FILT_160ms	1
-#define ADP8860_BL_AMBL_FILT_320ms	2
-#define ADP8860_BL_AMBL_FILT_640ms	3
-#define ADP8860_BL_AMBL_FILT_1280ms	4
-#define ADP8860_BL_AMBL_FILT_2560ms	5
-#define ADP8860_BL_AMBL_FILT_5120ms	6
-#define ADP8860_BL_AMBL_FILT_10240ms	7	/* 10.24 sec */
-
-/*
- * Blacklight current 0..30mA
- */
-#define ADP8860_BL_CUR_mA(I)		((I * 127) / 30)
-
-/*
- * L2 comparator current 0..1106uA
- */
-#define ADP8860_L2_COMP_CURR_uA(I)	((I * 255) / 1106)
-
-/*
- * L3 comparator current 0..138uA
- */
-#define ADP8860_L3_COMP_CURR_uA(I)	((I * 255) / 138)
-
-struct adp8860_backlight_platform_data {
-	u8 bl_led_assign;	/* 1 = Backlight 0 = Individual LED */
-
-	u8 bl_fade_in;		/* Backlight Fade-In Timer */
-	u8 bl_fade_out;		/* Backlight Fade-Out Timer */
-	u8 bl_fade_law;		/* fade-on/fade-off transfer characteristic */
-
-	u8 en_ambl_sens;	/* 1 = enable ambient light sensor */
-	u8 abml_filt;		/* Light sensor filter time */
-
-	u8 l1_daylight_max;	/* use BL_CUR_mA(I) 0 <= I <= 30 mA */
-	u8 l1_daylight_dim;	/* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */
-	u8 l2_office_max;	/* use BL_CUR_mA(I) 0 <= I <= 30 mA */
-	u8 l2_office_dim;	/* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */
-	u8 l3_dark_max;		/* use BL_CUR_mA(I) 0 <= I <= 30 mA */
-	u8 l3_dark_dim;		/* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */
-
-	u8 l2_trip;		/* use L2_COMP_CURR_uA(I) 0 <= I <= 1106 uA */
-	u8 l2_hyst;		/* use L2_COMP_CURR_uA(I) 0 <= I <= 1106 uA */
-	u8 l3_trip;		/* use L3_COMP_CURR_uA(I) 0 <= I <= 551 uA */
-	u8 l3_hyst;		/* use L3_COMP_CURR_uA(I) 0 <= I <= 551 uA */
-
-	/**
-	 * Independent Current Sinks / LEDS
-	 * Sinks not assigned to the Backlight can be exposed to
-	 * user space using the LEDS CLASS interface
-	 */
-
-	int num_leds;
-	struct led_info	*leds;
-	u8 led_fade_in;		/* LED Fade-In Timer */
-	u8 led_fade_out;	/* LED Fade-Out Timer */
-	u8 led_fade_law;	/* fade-on/fade-off transfer characteristic */
-	u8 led_on_time;
-
-	/**
-	 * Gain down disable. Setting this option does not allow the
-	 * charge pump to switch to lower gains. NOT AVAILABLE on ADP8860
-	 * 1 = the charge pump doesn't switch down in gain until all LEDs are 0.
-	 *  The charge pump switches up in gain as needed. This feature is
-	 *  useful if the ADP8863 charge pump is used to drive an external load.
-	 *  This feature must be used when utilizing small fly capacitors
-	 *  (0402 or smaller).
-	 * 0 = the charge pump automatically switches up and down in gain.
-	 *  This provides optimal efficiency, but is not suitable for driving
-	 *  loads that are not connected through the ADP8863 diode drivers.
-	 *  Additionally, the charge pump fly capacitors should be low ESR
-	 * and sized 0603 or greater.
-	 */
-
-	u8 gdwn_dis;
-};
-
-#endif /* __LINUX_I2C_ADP8860_H */
diff --git a/ANDROID_3.4.5/include/linux/i2c/adp8870.h b/ANDROID_3.4.5/include/linux/i2c/adp8870.h
deleted file mode 100644
index 624dcecc..00000000
--- a/ANDROID_3.4.5/include/linux/i2c/adp8870.h
+++ /dev/null
@@ -1,153 +0,0 @@
-/*
- * Definitions and platform data for Analog Devices
- * Backlight drivers ADP8870
- *
- * Copyright 2009-2010 Analog Devices Inc.
- *
- * Licensed under the GPL-2 or later.
- */
-
-#ifndef __LINUX_I2C_ADP8870_H
-#define __LINUX_I2C_ADP8870_H
-
-#define ID_ADP8870		8870
-
-#define ADP8870_MAX_BRIGHTNESS	0x7F
-#define FLAG_OFFT_SHIFT 8
-
-/*
- * LEDs subdevice platform data
- */
-
-#define ADP8870_LED_DIS_BLINK	(0 << FLAG_OFFT_SHIFT)
-#define ADP8870_LED_OFFT_600ms	(1 << FLAG_OFFT_SHIFT)
-#define ADP8870_LED_OFFT_1200ms	(2 << FLAG_OFFT_SHIFT)
-#define ADP8870_LED_OFFT_1800ms	(3 << FLAG_OFFT_SHIFT)
-
-#define ADP8870_LED_ONT_200ms	0
-#define ADP8870_LED_ONT_600ms	1
-#define ADP8870_LED_ONT_800ms	2
-#define ADP8870_LED_ONT_1200ms	3
-
-#define ADP8870_LED_D7		(7)
-#define ADP8870_LED_D6		(6)
-#define ADP8870_LED_D5		(5)
-#define ADP8870_LED_D4		(4)
-#define ADP8870_LED_D3		(3)
-#define ADP8870_LED_D2		(2)
-#define ADP8870_LED_D1		(1)
-
-/*
- * Backlight subdevice platform data
- */
-
-#define ADP8870_BL_D7		(1 << 6)
-#define ADP8870_BL_D6		(1 << 5)
-#define ADP8870_BL_D5		(1 << 4)
-#define ADP8870_BL_D4		(1 << 3)
-#define ADP8870_BL_D3		(1 << 2)
-#define ADP8870_BL_D2		(1 << 1)
-#define ADP8870_BL_D1		(1 << 0)
-
-#define ADP8870_FADE_T_DIS	0	/* Fade Timer Disabled */
-#define ADP8870_FADE_T_300ms	1	/* 0.3 Sec */
-#define ADP8870_FADE_T_600ms	2
-#define ADP8870_FADE_T_900ms	3
-#define ADP8870_FADE_T_1200ms	4
-#define ADP8870_FADE_T_1500ms	5
-#define ADP8870_FADE_T_1800ms	6
-#define ADP8870_FADE_T_2100ms	7
-#define ADP8870_FADE_T_2400ms	8
-#define ADP8870_FADE_T_2700ms	9
-#define ADP8870_FADE_T_3000ms	10
-#define ADP8870_FADE_T_3500ms	11
-#define ADP8870_FADE_T_4000ms	12
-#define ADP8870_FADE_T_4500ms	13
-#define ADP8870_FADE_T_5000ms	14
-#define ADP8870_FADE_T_5500ms	15	/* 5.5 Sec */
-
-#define ADP8870_FADE_LAW_LINEAR	0
-#define ADP8870_FADE_LAW_SQUARE	1
-#define ADP8870_FADE_LAW_CUBIC1	2
-#define ADP8870_FADE_LAW_CUBIC2	3
-
-#define ADP8870_BL_AMBL_FILT_80ms	0	/* Light sensor filter time */
-#define ADP8870_BL_AMBL_FILT_160ms	1
-#define ADP8870_BL_AMBL_FILT_320ms	2
-#define ADP8870_BL_AMBL_FILT_640ms	3
-#define ADP8870_BL_AMBL_FILT_1280ms	4
-#define ADP8870_BL_AMBL_FILT_2560ms	5
-#define ADP8870_BL_AMBL_FILT_5120ms	6
-#define ADP8870_BL_AMBL_FILT_10240ms	7	/* 10.24 sec */
-
-/*
- * Blacklight current 0..30mA
- */
-#define ADP8870_BL_CUR_mA(I)		((I * 127) / 30)
-
-/*
- * L2 comparator current 0..1106uA
- */
-#define ADP8870_L2_COMP_CURR_uA(I)	((I * 255) / 1106)
-
-/*
- * L3 comparator current 0..551uA
- */
-#define ADP8870_L3_COMP_CURR_uA(I)	((I * 255) / 551)
-
-/*
- * L4 comparator current 0..275uA
- */
-#define ADP8870_L4_COMP_CURR_uA(I)	((I * 255) / 275)
-
-/*
- * L5 comparator current 0..138uA
- */
-#define ADP8870_L5_COMP_CURR_uA(I)	((I * 255) / 138)
-
-struct adp8870_backlight_platform_data {
-	u8 bl_led_assign;	/* 1 = Backlight 0 = Individual LED */
-	u8 pwm_assign;		/* 1 = Enables PWM mode */
-
-	u8 bl_fade_in;		/* Backlight Fade-In Timer */
-	u8 bl_fade_out;		/* Backlight Fade-Out Timer */
-	u8 bl_fade_law;		/* fade-on/fade-off transfer characteristic */
-
-	u8 en_ambl_sens;	/* 1 = enable ambient light sensor */
-	u8 abml_filt;		/* Light sensor filter time */
-
-	u8 l1_daylight_max;	/* use BL_CUR_mA(I) 0 <= I <= 30 mA */
-	u8 l1_daylight_dim;	/* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */
-	u8 l2_bright_max;	/* use BL_CUR_mA(I) 0 <= I <= 30 mA */
-	u8 l2_bright_dim;	/* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */
-	u8 l3_office_max;	/* use BL_CUR_mA(I) 0 <= I <= 30 mA */
-	u8 l3_office_dim;	/* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */
-	u8 l4_indoor_max;	/* use BL_CUR_mA(I) 0 <= I <= 30 mA */
-	u8 l4_indor_dim;	/* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */
-	u8 l5_dark_max;		/* use BL_CUR_mA(I) 0 <= I <= 30 mA */
-	u8 l5_dark_dim;		/* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */
-
-	u8 l2_trip;		/* use L2_COMP_CURR_uA(I) 0 <= I <= 1106 uA */
-	u8 l2_hyst;		/* use L2_COMP_CURR_uA(I) 0 <= I <= 1106 uA */
-	u8 l3_trip;		/* use L3_COMP_CURR_uA(I) 0 <= I <= 551 uA */
-	u8 l3_hyst;		/* use L3_COMP_CURR_uA(I) 0 <= I <= 551 uA */
-	u8 l4_trip;		/* use L4_COMP_CURR_uA(I) 0 <= I <= 275 uA */
-	u8 l4_hyst;		/* use L4_COMP_CURR_uA(I) 0 <= I <= 275 uA */
-	u8 l5_trip;		/* use L5_COMP_CURR_uA(I) 0 <= I <= 138 uA */
-	u8 l5_hyst;		/* use L6_COMP_CURR_uA(I) 0 <= I <= 138 uA */
-
-	/**
-	 * Independent Current Sinks / LEDS
-	 * Sinks not assigned to the Backlight can be exposed to
-	 * user space using the LEDS CLASS interface
-	 */
-
-	int num_leds;
-	struct led_info	*leds;
-	u8 led_fade_in;		/* LED Fade-In Timer */
-	u8 led_fade_out;	/* LED Fade-Out Timer */
-	u8 led_fade_law;	/* fade-on/fade-off transfer characteristic */
-	u8 led_on_time;
-};
-
-#endif /* __LINUX_I2C_ADP8870_H */
diff --git a/ANDROID_3.4.5/include/linux/i2c/ads1015.h b/ANDROID_3.4.5/include/linux/i2c/ads1015.h
deleted file mode 100644
index d5aa2a04..00000000
--- a/ANDROID_3.4.5/include/linux/i2c/ads1015.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * Platform Data for ADS1015 12-bit 4-input ADC
- * (C) Copyright 2010
- * Dirk Eibach, Guntermann & Drunck GmbH <eibach@gdsys.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef LINUX_ADS1015_H
-#define LINUX_ADS1015_H
-
-#define ADS1015_CHANNELS 8
-
-struct ads1015_channel_data {
-	bool enabled;
-	unsigned int pga;
-	unsigned int data_rate;
-};
-
-struct ads1015_platform_data {
-	struct ads1015_channel_data channel_data[ADS1015_CHANNELS];
-};
-
-#endif /* LINUX_ADS1015_H */
diff --git a/ANDROID_3.4.5/include/linux/i2c/apds990x.h b/ANDROID_3.4.5/include/linux/i2c/apds990x.h
deleted file mode 100644
index d186fcc5..00000000
--- a/ANDROID_3.4.5/include/linux/i2c/apds990x.h
+++ /dev/null
@@ -1,79 +0,0 @@
-/*
- * This file is part of the APDS990x sensor driver.
- * Chip is combined proximity and ambient light sensor.
- *
- * Copyright (C) 2010 Nokia Corporation and/or its subsidiary(-ies).
- *
- * Contact: Samu Onkalo <samu.p.onkalo@nokia.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- */
-
-#ifndef __APDS990X_H__
-#define __APDS990X_H__
-
-
-#define APDS_IRLED_CURR_12mA	0x3
-#define APDS_IRLED_CURR_25mA	0x2
-#define APDS_IRLED_CURR_50mA	0x1
-#define APDS_IRLED_CURR_100mA	0x0
-
-/**
- * struct apds990x_chip_factors - defines effect of the cover window
- * @ga: Total glass attenuation
- * @cf1: clear channel factor 1 for raw to lux conversion
- * @irf1: IR channel factor 1 for raw to lux conversion
- * @cf2: clear channel factor 2 for raw to lux conversion
- * @irf2: IR channel factor 2 for raw to lux conversion
- * @df: device factor for conversion formulas
- *
- * Structure for tuning ALS calculation to match with environment.
- * Values depend on the material above the sensor and the sensor
- * itself. If the GA is zero, driver will use uncovered sensor default values
- * format: decimal value * APDS_PARAM_SCALE except df which is plain integer.
- */
-#define APDS_PARAM_SCALE 4096
-struct apds990x_chip_factors {
-	int ga;
-	int cf1;
-	int irf1;
-	int cf2;
-	int irf2;
-	int df;
-};
-
-/**
- * struct apds990x_platform_data - platform data for apsd990x.c driver
- * @cf: chip factor data
- * @pddrive: IR-led driving current
- * @ppcount: number of IR pulses used for proximity estimation
- * @setup_resources: interrupt line setup call back function
- * @release_resources: interrupt line release call back function
- *
- * Proximity detection result depends heavily on correct ppcount, pdrive
- * and cover window.
- *
- */
-
-struct apds990x_platform_data {
-	struct apds990x_chip_factors cf;
-	u8     pdrive;
-	u8     ppcount;
-	int    (*setup_resources)(void);
-	int    (*release_resources)(void);
-};
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/i2c/at24.h b/ANDROID_3.4.5/include/linux/i2c/at24.h
deleted file mode 100644
index 285025a9..00000000
--- a/ANDROID_3.4.5/include/linux/i2c/at24.h
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * at24.h - platform_data for the at24 (generic eeprom) driver
- * (C) Copyright 2008 by Pengutronix
- * (C) Copyright 2012 by Wolfram Sang
- * same license as the driver
- */
-
-#ifndef _LINUX_AT24_H
-#define _LINUX_AT24_H
-
-#include <linux/types.h>
-#include <linux/memory.h>
-
-/**
- * struct at24_platform_data - data to set up at24 (generic eeprom) driver
- * @byte_len: size of eeprom in byte
- * @page_size: number of byte which can be written in one go
- * @flags: tunable options, check AT24_FLAG_* defines
- * @setup: an optional callback invoked after eeprom is probed; enables kernel
-	code to access eeprom via memory_accessor, see example
- * @context: optional parameter passed to setup()
- *
- * If you set up a custom eeprom type, please double-check the parameters.
- * Especially page_size needs extra care, as you risk data loss if your value
- * is bigger than what the chip actually supports!
- *
- * An example in pseudo code for a setup() callback:
- *
- * void get_mac_addr(struct memory_accessor *mem_acc, void *context)
- * {
- * 	u8 *mac_addr = ethernet_pdata->mac_addr;
- *	off_t offset = context;
- *
- *	// Read MAC addr from EEPROM
- *	if (mem_acc->read(mem_acc, mac_addr, offset, ETH_ALEN) == ETH_ALEN)
- *		pr_info("Read MAC addr from EEPROM: %pM\n", mac_addr);
- * }
- *
- * This function pointer and context can now be set up in at24_platform_data.
- */
-
-struct at24_platform_data {
-	u32		byte_len;		/* size (sum of all addr) */
-	u16		page_size;		/* for writes */
-	u8		flags;
-#define AT24_FLAG_ADDR16	0x80	/* address pointer is 16 bit */
-#define AT24_FLAG_READONLY	0x40	/* sysfs-entry will be read-only */
-#define AT24_FLAG_IRUGO		0x20	/* sysfs-entry will be world-readable */
-#define AT24_FLAG_TAKE8ADDR	0x10	/* take always 8 addresses (24c00) */
-
-	void		(*setup)(struct memory_accessor *, void *context);
-	void		*context;
-};
-
-#endif /* _LINUX_AT24_H */
diff --git a/ANDROID_3.4.5/include/linux/i2c/atmel_mxt_ts.h b/ANDROID_3.4.5/include/linux/i2c/atmel_mxt_ts.h
deleted file mode 100644
index f027f7a6..00000000
--- a/ANDROID_3.4.5/include/linux/i2c/atmel_mxt_ts.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- * Atmel maXTouch Touchscreen driver
- *
- * Copyright (C) 2010 Samsung Electronics Co.Ltd
- * Author: Joonyoung Shim <jy0922.shim@samsung.com>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#ifndef __LINUX_ATMEL_MXT_TS_H
-#define __LINUX_ATMEL_MXT_TS_H
-
-#include <linux/types.h>
-
-/* Orient */
-#define MXT_NORMAL		0x0
-#define MXT_DIAGONAL		0x1
-#define MXT_HORIZONTAL_FLIP	0x2
-#define MXT_ROTATED_90_COUNTER	0x3
-#define MXT_VERTICAL_FLIP	0x4
-#define MXT_ROTATED_90		0x5
-#define MXT_ROTATED_180		0x6
-#define MXT_DIAGONAL_COUNTER	0x7
-
-/* The platform data for the Atmel maXTouch touchscreen driver */
-struct mxt_platform_data {
-	const u8 *config;
-	size_t config_length;
-
-	unsigned int x_line;
-	unsigned int y_line;
-	unsigned int x_size;
-	unsigned int y_size;
-	unsigned int blen;
-	unsigned int threshold;
-	unsigned int voltage;
-	unsigned char orient;
-	unsigned long irqflags;
-};
-
-#endif /* __LINUX_ATMEL_MXT_TS_H */
diff --git a/ANDROID_3.4.5/include/linux/i2c/bh1770glc.h b/ANDROID_3.4.5/include/linux/i2c/bh1770glc.h
deleted file mode 100644
index 8b5e2df3..00000000
--- a/ANDROID_3.4.5/include/linux/i2c/bh1770glc.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- * This file is part of the ROHM BH1770GLC / OSRAM SFH7770 sensor driver.
- * Chip is combined proximity and ambient light sensor.
- *
- * Copyright (C) 2010 Nokia Corporation and/or its subsidiary(-ies).
- *
- * Contact: Samu Onkalo <samu.p.onkalo@nokia.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- */
-
-#ifndef __BH1770_H__
-#define __BH1770_H__
-
-/**
- * struct bh1770_platform_data - platform data for bh1770glc driver
- * @led_def_curr: IR led driving current.
- * @glass_attenuation: Attenuation factor for covering window.
- * @setup_resources: Call back for interrupt line setup function
- * @release_resources: Call back for interrupte line release function
- *
- * Example of glass attenuation: 16384 * 385 / 100 means attenuation factor
- * of 3.85. i.e. light_above_sensor = light_above_cover_window / 3.85
- */
-
-struct bh1770_platform_data {
-#define BH1770_LED_5mA	0
-#define BH1770_LED_10mA	1
-#define BH1770_LED_20mA	2
-#define BH1770_LED_50mA	3
-#define BH1770_LED_100mA 4
-#define BH1770_LED_150mA 5
-#define BH1770_LED_200mA 6
-	__u8 led_def_curr;
-#define BH1770_NEUTRAL_GA 16384 /* 16384 / 16384 = 1 */
-	__u32 glass_attenuation;
-	int (*setup_resources)(void);
-	int (*release_resources)(void);
-};
-#endif
diff --git a/ANDROID_3.4.5/include/linux/i2c/dm355evm_msp.h b/ANDROID_3.4.5/include/linux/i2c/dm355evm_msp.h
deleted file mode 100644
index 37247035..00000000
--- a/ANDROID_3.4.5/include/linux/i2c/dm355evm_msp.h
+++ /dev/null
@@ -1,79 +0,0 @@
-/*
- * dm355evm_msp.h - support MSP430 microcontroller on DM355EVM board
- */
-#ifndef __LINUX_I2C_DM355EVM_MSP
-#define __LINUX_I2C_DM355EVM_MSP
-
-/*
- * Written against Spectrum's writeup for the A4 firmware revision,
- * and tweaked to match source and rev D2 schematics by removing CPLD
- * and NOR flash hooks (which were last appropriate in rev B boards).
- *
- * Note that the firmware supports a flavor of write posting ... to be
- * sure a write completes, issue another read or write.
- */
-
-/* utilities to access "registers" emulated by msp430 firmware */
-extern int dm355evm_msp_write(u8 value, u8 reg);
-extern int dm355evm_msp_read(u8 reg);
-
-
-/* command/control registers */
-#define DM355EVM_MSP_COMMAND		0x00
-#	define MSP_COMMAND_NULL		0
-#	define MSP_COMMAND_RESET_COLD	1
-#	define MSP_COMMAND_RESET_WARM	2
-#	define MSP_COMMAND_RESET_WARM_I	3
-#	define MSP_COMMAND_POWEROFF	4
-#	define MSP_COMMAND_IR_REINIT	5
-#define DM355EVM_MSP_STATUS		0x01
-#	define MSP_STATUS_BAD_OFFSET	BIT(0)
-#	define MSP_STATUS_BAD_COMMAND	BIT(1)
-#	define MSP_STATUS_POWER_ERROR	BIT(2)
-#	define MSP_STATUS_RXBUF_OVERRUN	BIT(3)
-#define DM355EVM_MSP_RESET		0x02	/* 0 bits == in reset */
-#	define MSP_RESET_DC5		BIT(0)
-#	define MSP_RESET_TVP5154	BIT(2)
-#	define MSP_RESET_IMAGER		BIT(3)
-#	define MSP_RESET_ETHERNET	BIT(4)
-#	define MSP_RESET_SYS		BIT(5)
-#	define MSP_RESET_AIC33		BIT(7)
-
-/* GPIO registers ... bit patterns mostly match the source MSP ports */
-#define DM355EVM_MSP_LED		0x03	/* active low (MSP P4) */
-#define DM355EVM_MSP_SWITCH1		0x04	/* (MSP P5, masked) */
-#	define MSP_SWITCH1_SW6_1	BIT(0)
-#	define MSP_SWITCH1_SW6_2	BIT(1)
-#	define MSP_SWITCH1_SW6_3	BIT(2)
-#	define MSP_SWITCH1_SW6_4	BIT(3)
-#	define MSP_SWITCH1_J1		BIT(4)	/* NTSC/PAL */
-#	define MSP_SWITCH1_MSP_INT	BIT(5)	/* active low */
-#define DM355EVM_MSP_SWITCH2		0x05	/* (MSP P6, masked) */
-#	define MSP_SWITCH2_SW10		BIT(3)
-#	define MSP_SWITCH2_SW11		BIT(4)
-#	define MSP_SWITCH2_SW12		BIT(5)
-#	define MSP_SWITCH2_SW13		BIT(6)
-#	define MSP_SWITCH2_SW14		BIT(7)
-#define DM355EVM_MSP_SDMMC		0x06	/* (MSP P2, masked) */
-#	define MSP_SDMMC_0_WP		BIT(1)
-#	define MSP_SDMMC_0_CD		BIT(2)	/* active low */
-#	define MSP_SDMMC_1_WP		BIT(3)
-#	define MSP_SDMMC_1_CD		BIT(4)	/* active low */
-#define DM355EVM_MSP_FIRMREV		0x07	/* not a GPIO (out of order) */
-#define DM355EVM_MSP_VIDEO_IN		0x08	/* (MSP P3, masked) */
-#	define MSP_VIDEO_IMAGER		BIT(7)	/* low == tvp5146 */
-
-/* power supply registers are currently omitted */
-
-/* RTC registers */
-#define DM355EVM_MSP_RTC_0		0x12	/* LSB */
-#define DM355EVM_MSP_RTC_1		0x13
-#define DM355EVM_MSP_RTC_2		0x14
-#define DM355EVM_MSP_RTC_3		0x15	/* MSB */
-
-/* input event queue registers; code == ((HIGH << 8) | LOW) */
-#define DM355EVM_MSP_INPUT_COUNT	0x16	/* decrement by reading LOW */
-#define DM355EVM_MSP_INPUT_HIGH		0x17
-#define DM355EVM_MSP_INPUT_LOW		0x18
-
-#endif /* __LINUX_I2C_DM355EVM_MSP */
diff --git a/ANDROID_3.4.5/include/linux/i2c/ds620.h b/ANDROID_3.4.5/include/linux/i2c/ds620.h
deleted file mode 100644
index 736bb87a..00000000
--- a/ANDROID_3.4.5/include/linux/i2c/ds620.h
+++ /dev/null
@@ -1,21 +0,0 @@
-#ifndef _LINUX_DS620_H
-#define _LINUX_DS620_H
-
-#include <linux/types.h>
-#include <linux/i2c.h>
-
-/* platform data for the DS620 temperature sensor and thermostat */
-
-struct ds620_platform_data {
-	/*
-	 *  Thermostat output pin PO mode:
-	 *  0 = always low (default)
-	 *  1 = PO_LOW
-	 *  2 = PO_HIGH
-	 *
-	 * (see Documentation/hwmon/ds620)
-	 */
-	int pomode;
-};
-
-#endif /* _LINUX_DS620_H */
diff --git a/ANDROID_3.4.5/include/linux/i2c/i2c-sh_mobile.h b/ANDROID_3.4.5/include/linux/i2c/i2c-sh_mobile.h
deleted file mode 100644
index beda7081..00000000
--- a/ANDROID_3.4.5/include/linux/i2c/i2c-sh_mobile.h
+++ /dev/null
@@ -1,10 +0,0 @@
-#ifndef __I2C_SH_MOBILE_H__
-#define __I2C_SH_MOBILE_H__
-
-#include <linux/platform_device.h>
-
-struct i2c_sh_mobile_platform_data {
-	unsigned long bus_speed;
-};
-
-#endif /* __I2C_SH_MOBILE_H__ */
diff --git a/ANDROID_3.4.5/include/linux/i2c/lm8323.h b/ANDROID_3.4.5/include/linux/i2c/lm8323.h
deleted file mode 100644
index 478d668b..00000000
--- a/ANDROID_3.4.5/include/linux/i2c/lm8323.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- * lm8323.h - Configuration for LM8323 keypad driver.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation (version 2 of the License only).
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#ifndef __LINUX_LM8323_H
-#define __LINUX_LM8323_H
-
-#include <linux/types.h>
-
-/*
- * Largest keycode that the chip can send, plus one,
- * so keys can be mapped directly at the index of the
- * LM8323 keycode instead of subtracting one.
- */
-#define LM8323_KEYMAP_SIZE	(0x7f + 1)
-
-#define LM8323_NUM_PWMS		3
-
-struct lm8323_platform_data {
-	int debounce_time; /* Time to watch for key bouncing, in ms. */
-	int active_time; /* Idle time until sleep, in ms. */
-
-	int size_x;
-	int size_y;
-	bool repeat;
-	const unsigned short *keymap;
-
-	const char *pwm_names[LM8323_NUM_PWMS];
-
-	const char *name; /* Device name. */
-};
-
-#endif /* __LINUX_LM8323_H */
diff --git a/ANDROID_3.4.5/include/linux/i2c/ltc4245.h b/ANDROID_3.4.5/include/linux/i2c/ltc4245.h
deleted file mode 100644
index 56bda4be..00000000
--- a/ANDROID_3.4.5/include/linux/i2c/ltc4245.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * Platform Data for LTC4245 hardware monitor chip
- *
- * Copyright (c) 2010 Ira W. Snyder <iws@ovro.caltech.edu>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#ifndef LINUX_LTC4245_H
-#define LINUX_LTC4245_H
-
-#include <linux/types.h>
-
-struct ltc4245_platform_data {
-	bool use_extra_gpios;
-};
-
-#endif /* LINUX_LTC4245_H */
diff --git a/ANDROID_3.4.5/include/linux/i2c/max6639.h b/ANDROID_3.4.5/include/linux/i2c/max6639.h
deleted file mode 100644
index 6011c420..00000000
--- a/ANDROID_3.4.5/include/linux/i2c/max6639.h
+++ /dev/null
@@ -1,14 +0,0 @@
-#ifndef _LINUX_MAX6639_H
-#define _LINUX_MAX6639_H
-
-#include <linux/types.h>
-
-/* platform data for the MAX6639 temperature sensor and fan control */
-
-struct max6639_platform_data {
-	bool pwm_polarity;	/* Polarity low (0) or high (1, default) */
-	int ppr;		/* Pulses per rotation 1..4 (default == 2) */
-	int rpm_range;		/* 2000, 4000 (default), 8000 or 16000 */
-};
-
-#endif /* _LINUX_MAX6639_H */
diff --git a/ANDROID_3.4.5/include/linux/i2c/max732x.h b/ANDROID_3.4.5/include/linux/i2c/max732x.h
deleted file mode 100644
index c04bac8b..00000000
--- a/ANDROID_3.4.5/include/linux/i2c/max732x.h
+++ /dev/null
@@ -1,22 +0,0 @@
-#ifndef __LINUX_I2C_MAX732X_H
-#define __LINUX_I2C_MAX732X_H
-
-/* platform data for the MAX732x 8/16-bit I/O expander driver */
-
-struct max732x_platform_data {
-	/* number of the first GPIO */
-	unsigned	gpio_base;
-
-	/* interrupt base */
-	int		irq_base;
-
-	void		*context;	/* param to setup/teardown */
-
-	int		(*setup)(struct i2c_client *client,
-				unsigned gpio, unsigned ngpio,
-				void *context);
-	int		(*teardown)(struct i2c_client *client,
-				unsigned gpio, unsigned ngpio,
-				void *context);
-};
-#endif /* __LINUX_I2C_MAX732X_H */
diff --git a/ANDROID_3.4.5/include/linux/i2c/mcs.h b/ANDROID_3.4.5/include/linux/i2c/mcs.h
deleted file mode 100644
index 61bb18a4..00000000
--- a/ANDROID_3.4.5/include/linux/i2c/mcs.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * Copyright (C) 2009 - 2010 Samsung Electronics Co.Ltd
- * Author: Joonyoung Shim <jy0922.shim@samsung.com>
- * Author: HeungJun Kim <riverful.kim@samsung.com>
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- */
-
-#ifndef __LINUX_MCS_H
-#define __LINUX_MCS_H
-
-#define MCS_KEY_MAP(v, c)	((((v) & 0xff) << 16) | ((c) & 0xffff))
-#define MCS_KEY_VAL(v)		(((v) >> 16) & 0xff)
-#define MCS_KEY_CODE(v)		((v) & 0xffff)
-
-struct mcs_platform_data {
-	void (*poweron)(bool);
-	void (*cfg_pin)(void);
-
-	/* touchscreen */
-	unsigned int x_size;
-	unsigned int y_size;
-
-	/* touchkey */
-	const u32 *keymap;
-	unsigned int keymap_size;
-	unsigned int key_maxval;
-	bool no_autorepeat;
-};
-
-#endif	/* __LINUX_MCS_H */
diff --git a/ANDROID_3.4.5/include/linux/i2c/mpr121_touchkey.h b/ANDROID_3.4.5/include/linux/i2c/mpr121_touchkey.h
deleted file mode 100644
index f0bcc38b..00000000
--- a/ANDROID_3.4.5/include/linux/i2c/mpr121_touchkey.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/* Header file for Freescale MPR121 Capacitive Touch Sensor */
-
-#ifndef _MPR121_TOUCHKEY_H
-#define _MPR121_TOUCHKEY_H
-
-/**
- * struct mpr121_platform_data - platform data for mpr121 sensor
- * @keymap: pointer to array of KEY_* values representing keymap
- * @keymap_size: size of the keymap
- * @wakeup: configure the button as a wake-up source
- * @vdd_uv: VDD voltage in uV
- */
-struct mpr121_platform_data {
-	const unsigned short *keymap;
-	unsigned int keymap_size;
-	bool wakeup;
-	int vdd_uv;
-};
-
-#endif /* _MPR121_TOUCHKEY_H */
diff --git a/ANDROID_3.4.5/include/linux/i2c/pca953x.h b/ANDROID_3.4.5/include/linux/i2c/pca953x.h
deleted file mode 100644
index 139ba526..00000000
--- a/ANDROID_3.4.5/include/linux/i2c/pca953x.h
+++ /dev/null
@@ -1,30 +0,0 @@
-#ifndef _LINUX_PCA953X_H
-#define _LINUX_PCA953X_H
-
-#include <linux/types.h>
-#include <linux/i2c.h>
-
-/* platform data for the PCA9539 16-bit I/O expander driver */
-
-struct pca953x_platform_data {
-	/* number of the first GPIO */
-	unsigned	gpio_base;
-
-	/* initial polarity inversion setting */
-	uint16_t	invert;
-
-	/* interrupt base */
-	int		irq_base;
-
-	void		*context;	/* param to setup/teardown */
-
-	int		(*setup)(struct i2c_client *client,
-				unsigned gpio, unsigned ngpio,
-				void *context);
-	int		(*teardown)(struct i2c_client *client,
-				unsigned gpio, unsigned ngpio,
-				void *context);
-	const char	*const *names;
-};
-
-#endif /* _LINUX_PCA953X_H */
diff --git a/ANDROID_3.4.5/include/linux/i2c/pca954x.h b/ANDROID_3.4.5/include/linux/i2c/pca954x.h
deleted file mode 100644
index 28f1f8d5..00000000
--- a/ANDROID_3.4.5/include/linux/i2c/pca954x.h
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- *
- * pca954x.h - I2C multiplexer/switch support
- *
- * Copyright (c) 2008-2009 Rodolfo Giometti <giometti@linux.it>
- * Copyright (c) 2008-2009 Eurotech S.p.A. <info@eurotech.it>
- * Michael Lawnick <michael.lawnick.ext@nsn.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-
-#ifndef _LINUX_I2C_PCA954X_H
-#define _LINUX_I2C_PCA954X_H
-
-/* Platform data for the PCA954x I2C multiplexers */
-
-/* Per channel initialisation data:
- * @adap_id: bus number for the adapter. 0 = don't care
- * @deselect_on_exit: set this entry to 1, if your H/W needs deselection
- *                    of this channel after transaction.
- *
- */
-struct pca954x_platform_mode {
-	int		adap_id;
-	unsigned int	deselect_on_exit:1;
-};
-
-/* Per mux/switch data, used with i2c_register_board_info */
-struct pca954x_platform_data {
-	struct pca954x_platform_mode *modes;
-	int num_modes;
-};
-
-#endif /* _LINUX_I2C_PCA954X_H */
diff --git a/ANDROID_3.4.5/include/linux/i2c/pcf857x.h b/ANDROID_3.4.5/include/linux/i2c/pcf857x.h
deleted file mode 100644
index 0767a2a6..00000000
--- a/ANDROID_3.4.5/include/linux/i2c/pcf857x.h
+++ /dev/null
@@ -1,44 +0,0 @@
-#ifndef __LINUX_PCF857X_H
-#define __LINUX_PCF857X_H
-
-/**
- * struct pcf857x_platform_data - data to set up pcf857x driver
- * @gpio_base: number of the chip's first GPIO
- * @n_latch: optional bit-inverse of initial register value; if
- *	you leave this initialized to zero the driver will act
- *	like the chip was just reset
- * @setup: optional callback issued once the GPIOs are valid
- * @teardown: optional callback issued before the GPIOs are invalidated
- * @context: optional parameter passed to setup() and teardown()
- *
- * In addition to the I2C_BOARD_INFO() state appropriate to each chip,
- * the i2c_board_info used with the pcf875x driver must provide its
- * platform_data (pointer to one of these structures) with at least
- * the gpio_base value initialized.
- *
- * The @setup callback may be used with the kind of board-specific glue
- * which hands the (now-valid) GPIOs to other drivers, or which puts
- * devices in their initial states using these GPIOs.
- *
- * These GPIO chips are only "quasi-bidirectional"; read the chip specs
- * to understand the behavior.  They don't have separate registers to
- * record which pins are used for input or output, record which output
- * values are driven, or provide access to input values.  That must be
- * inferred by reading the chip's value and knowing the last value written
- * to it.  If you leave n_latch initialized to zero, that last written
- * value is presumed to be all ones (as if the chip were just reset).
- */
-struct pcf857x_platform_data {
-	unsigned	gpio_base;
-	unsigned	n_latch;
-
-	int		(*setup)(struct i2c_client *client,
-					int gpio, unsigned ngpio,
-					void *context);
-	int		(*teardown)(struct i2c_client *client,
-					int gpio, unsigned ngpio,
-					void *context);
-	void		*context;
-};
-
-#endif /* __LINUX_PCF857X_H */
diff --git a/ANDROID_3.4.5/include/linux/i2c/pmbus.h b/ANDROID_3.4.5/include/linux/i2c/pmbus.h
deleted file mode 100644
index 69280db0..00000000
--- a/ANDROID_3.4.5/include/linux/i2c/pmbus.h
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- * Hardware monitoring driver for PMBus devices
- *
- * Copyright (c) 2010, 2011 Ericsson AB.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef _PMBUS_H_
-#define _PMBUS_H_
-
-/* flags */
-
-/*
- * PMBUS_SKIP_STATUS_CHECK
- *
- * During register detection, skip checking the status register for
- * communication or command errors.
- *
- * Some PMBus chips respond with valid data when trying to read an unsupported
- * register. For such chips, checking the status register is mandatory when
- * trying to determine if a chip register exists or not.
- * Other PMBus chips don't support the STATUS_CML register, or report
- * communication errors for no explicable reason. For such chips, checking
- * the status register must be disabled.
- */
-#define PMBUS_SKIP_STATUS_CHECK	(1 << 0)
-
-struct pmbus_platform_data {
-	u32 flags;		/* Device specific flags */
-};
-
-#endif /* _PMBUS_H_ */
diff --git a/ANDROID_3.4.5/include/linux/i2c/pxa-i2c.h b/ANDROID_3.4.5/include/linux/i2c/pxa-i2c.h
deleted file mode 100644
index 1a9f65e6..00000000
--- a/ANDROID_3.4.5/include/linux/i2c/pxa-i2c.h
+++ /dev/null
@@ -1,82 +0,0 @@
-/*
- *  i2c_pxa.h
- *
- *  Copyright (C) 2002 Intrinsyc Software Inc.
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- *
- */
-#ifndef _I2C_PXA_H_
-#define _I2C_PXA_H_
-
-#if 0
-#define DEF_TIMEOUT             3
-#else
-/* need a longer timeout if we're dealing with the fact we may well be
- * looking at a multi-master environment
-*/
-#define DEF_TIMEOUT             32
-#endif
-
-#define BUS_ERROR               (-EREMOTEIO)
-#define XFER_NAKED              (-ECONNREFUSED)
-#define I2C_RETRY               (-2000) /* an error has occurred retry transmit */
-
-/* ICR initialize bit values
-*
-*  15. FM       0 (100 Khz operation)
-*  14. UR       0 (No unit reset)
-*  13. SADIE    0 (Disables the unit from interrupting on slave addresses
-*                                       matching its slave address)
-*  12. ALDIE    0 (Disables the unit from interrupt when it loses arbitration
-*                                       in master mode)
-*  11. SSDIE    0 (Disables interrupts from a slave stop detected, in slave mode)
-*  10. BEIE     1 (Enable interrupts from detected bus errors, no ACK sent)
-*  9.  IRFIE    1 (Enable interrupts from full buffer received)
-*  8.  ITEIE    1 (Enables the I2C unit to interrupt when transmit buffer empty)
-*  7.  GCD      1 (Disables i2c unit response to general call messages as a slave)
-*  6.  IUE      0 (Disable unit until we change settings)
-*  5.  SCLE     1 (Enables the i2c clock output for master mode (drives SCL)
-*  4.  MA       0 (Only send stop with the ICR stop bit)
-*  3.  TB       0 (We are not transmitting a byte initially)
-*  2.  ACKNAK   0 (Send an ACK after the unit receives a byte)
-*  1.  STOP     0 (Do not send a STOP)
-*  0.  START    0 (Do not send a START)
-*
-*/
-#define I2C_ICR_INIT	(ICR_BEIE | ICR_IRFIE | ICR_ITEIE | ICR_GCD | ICR_SCLE)
-
-/* I2C status register init values
- *
- * 10. BED      1 (Clear bus error detected)
- * 9.  SAD      1 (Clear slave address detected)
- * 7.  IRF      1 (Clear IDBR Receive Full)
- * 6.  ITE      1 (Clear IDBR Transmit Empty)
- * 5.  ALD      1 (Clear Arbitration Loss Detected)
- * 4.  SSD      1 (Clear Slave Stop Detected)
- */
-#define I2C_ISR_INIT	0x7FF  /* status register init */
-
-struct i2c_slave_client;
-
-struct i2c_pxa_platform_data {
-	unsigned int		slave_addr;
-	struct i2c_slave_client	*slave;
-	unsigned int		class;
-	unsigned int		use_pio :1;
-	unsigned int		fast_mode :1;
-};
-
-extern void pxa_set_i2c_info(struct i2c_pxa_platform_data *info);
-
-#ifdef CONFIG_PXA27x
-extern void pxa27x_set_i2c_power_info(struct i2c_pxa_platform_data *info);
-#endif
-
-#ifdef CONFIG_PXA3xx
-extern void pxa3xx_set_i2c_power_info(struct i2c_pxa_platform_data *info);
-#endif
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/i2c/s6000.h b/ANDROID_3.4.5/include/linux/i2c/s6000.h
deleted file mode 100644
index d9b34bfd..00000000
--- a/ANDROID_3.4.5/include/linux/i2c/s6000.h
+++ /dev/null
@@ -1,10 +0,0 @@
-#ifndef __LINUX_I2C_S6000_H
-#define __LINUX_I2C_S6000_H
-
-struct s6_i2c_platform_data {
-	const char *clock; /* the clock to use */
-	int bus_num; /* the bus number to register */
-};
-
-#endif
-
diff --git a/ANDROID_3.4.5/include/linux/i2c/sx150x.h b/ANDROID_3.4.5/include/linux/i2c/sx150x.h
deleted file mode 100644
index 52baa79d..00000000
--- a/ANDROID_3.4.5/include/linux/i2c/sx150x.h
+++ /dev/null
@@ -1,82 +0,0 @@
-/*
- * Driver for the Semtech SX150x I2C GPIO Expanders
- *
- * Copyright (c) 2010, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA.
- */
-#ifndef __LINUX_I2C_SX150X_H
-#define __LINUX_I2C_SX150X_H
-
-/**
- * struct sx150x_platform_data - config data for SX150x driver
- * @gpio_base: The index number of the first GPIO assigned to this
- *             GPIO expander.  The expander will create a block of
- *             consecutively numbered gpios beginning at the given base,
- *             with the size of the block depending on the model of the
- *             expander chip.
- * @oscio_is_gpo: If set to true, the driver will configure OSCIO as a GPO
- *                instead of as an oscillator, increasing the size of the
- *                GP(I)O pool created by this expander by one.  The
- *                output-only GPO pin will be added at the end of the block.
- * @io_pullup_ena: A bit-mask which enables or disables the pull-up resistor
- *                 for each IO line in the expander.  Setting the bit at
- *                 position n will enable the pull-up for the IO at
- *                 the corresponding offset.  For chips with fewer than
- *                 16 IO pins, high-end bits are ignored.
- * @io_pulldn_ena: A bit-mask which enables-or disables the pull-down
- *                 resistor for each IO line in the expander. Setting the
- *                 bit at position n will enable the pull-down for the IO at
- *                 the corresponding offset.  For chips with fewer than
- *                 16 IO pins, high-end bits are ignored.
- * @io_open_drain_ena: A bit-mask which enables-or disables open-drain
- *                     operation for each IO line in the expander. Setting the
- *                     bit at position n enables open-drain operation for
- *                     the IO at the corresponding offset.  Clearing the bit
- *                     enables regular push-pull operation for that IO.
- *                     For chips with fewer than 16 IO pins, high-end bits
- *                     are ignored.
- * @io_polarity: A bit-mask which enables polarity inversion for each IO line
- *               in the expander.  Setting the bit at position n inverts
- *               the polarity of that IO line, while clearing it results
- *               in normal polarity. For chips with fewer than 16 IO pins,
- *               high-end bits are ignored.
- * @irq_summary: The 'summary IRQ' line to which the GPIO expander's INT line
- *               is connected, via which it reports interrupt events
- *               across all GPIO lines.  This must be a real,
- *               pre-existing IRQ line.
- *               Setting this value < 0 disables the irq_chip functionality
- *               of the driver.
- * @irq_base: The first 'virtual IRQ' line at which our block of GPIO-based
- *            IRQ lines will appear.  Similarly to gpio_base, the expander
- *            will create a block of irqs beginning at this number.
- *            This value is ignored if irq_summary is < 0.
- * @reset_during_probe: If set to true, the driver will trigger a full
- *                      reset of the chip at the beginning of the probe
- *                      in order to place it in a known state.
- */
-struct sx150x_platform_data {
-	unsigned gpio_base;
-	bool     oscio_is_gpo;
-	u16      io_pullup_ena;
-	u16      io_pulldn_ena;
-	u16      io_open_drain_ena;
-	u16      io_polarity;
-	int      irq_summary;
-	unsigned irq_base;
-	bool     reset_during_probe;
-};
-
-#endif /* __LINUX_I2C_SX150X_H */
diff --git a/ANDROID_3.4.5/include/linux/i2c/tc35876x.h b/ANDROID_3.4.5/include/linux/i2c/tc35876x.h
deleted file mode 100644
index cd6a51c7..00000000
--- a/ANDROID_3.4.5/include/linux/i2c/tc35876x.h
+++ /dev/null
@@ -1,11 +0,0 @@
-
-#ifndef _TC35876X_H
-#define _TC35876X_H
-
-struct tc35876x_platform_data {
-	int gpio_bridge_reset;
-	int gpio_panel_bl_en;
-	int gpio_panel_vadd;
-};
-
-#endif /* _TC35876X_H */
diff --git a/ANDROID_3.4.5/include/linux/i2c/tps65010.h b/ANDROID_3.4.5/include/linux/i2c/tps65010.h
deleted file mode 100644
index 08aa9227..00000000
--- a/ANDROID_3.4.5/include/linux/i2c/tps65010.h
+++ /dev/null
@@ -1,205 +0,0 @@
-/* linux/i2c/tps65010.h
- *
- * Functions to access TPS65010 power management device.
- *
- * Copyright (C) 2004 Dirk Behme <dirk.behme@de.bosch.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the  GNU General Public License along
- * with this program; if not, write  to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __LINUX_I2C_TPS65010_H
-#define __LINUX_I2C_TPS65010_H
-
-/*
- * ----------------------------------------------------------------------------
- * Registers, all 8 bits
- * ----------------------------------------------------------------------------
- */
-
-#define	TPS_CHGSTATUS		0x01
-#	define	TPS_CHG_USB		(1 << 7)
-#	define	TPS_CHG_AC		(1 << 6)
-#	define	TPS_CHG_THERM		(1 << 5)
-#	define	TPS_CHG_TERM		(1 << 4)
-#	define	TPS_CHG_TAPER_TMO	(1 << 3)
-#	define	TPS_CHG_CHG_TMO		(1 << 2)
-#	define	TPS_CHG_PRECHG_TMO	(1 << 1)
-#	define	TPS_CHG_TEMP_ERR	(1 << 0)
-#define	TPS_REGSTATUS		0x02
-#	define	TPS_REG_ONOFF		(1 << 7)
-#	define	TPS_REG_COVER		(1 << 6)
-#	define	TPS_REG_UVLO		(1 << 5)
-#	define	TPS_REG_NO_CHG		(1 << 4)	/* tps65013 */
-#	define	TPS_REG_PG_LD02		(1 << 3)
-#	define	TPS_REG_PG_LD01		(1 << 2)
-#	define	TPS_REG_PG_MAIN		(1 << 1)
-#	define	TPS_REG_PG_CORE		(1 << 0)
-#define	TPS_MASK1		0x03
-#define	TPS_MASK2		0x04
-#define	TPS_ACKINT1		0x05
-#define	TPS_ACKINT2		0x06
-#define	TPS_CHGCONFIG		0x07
-#	define	TPS_CHARGE_POR		(1 << 7)	/* 65010/65012 */
-#	define	TPS65013_AUA		(1 << 7)	/* 65011/65013 */
-#	define	TPS_CHARGE_RESET	(1 << 6)
-#	define	TPS_CHARGE_FAST		(1 << 5)
-#	define	TPS_CHARGE_CURRENT	(3 << 3)
-#	define	TPS_VBUS_500MA		(1 << 2)
-#	define	TPS_VBUS_CHARGING	(1 << 1)
-#	define	TPS_CHARGE_ENABLE	(1 << 0)
-#define	TPS_LED1_ON		0x08
-#define	TPS_LED1_PER		0x09
-#define	TPS_LED2_ON		0x0a
-#define	TPS_LED2_PER		0x0b
-#define	TPS_VDCDC1		0x0c
-#	define	TPS_ENABLE_LP		(1 << 3)
-#define	TPS_VDCDC2		0x0d
-#	define	TPS_LP_COREOFF	(1 << 7)
-#	define 	TPS_VCORE_1_8V	(7<<4)
-#	define 	TPS_VCORE_1_5V	(6 << 4)
-#	define 	TPS_VCORE_1_4V	(5 << 4)
-#	define 	TPS_VCORE_1_3V	(4 << 4)
-#	define 	TPS_VCORE_1_2V	(3 << 4)
-#	define 	TPS_VCORE_1_1V	(2 << 4)
-#	define 	TPS_VCORE_1_0V	(1 << 4)
-#	define 	TPS_VCORE_0_85V	(0 << 4)
-#	define	TPS_VCORE_LP_1_2V (3 << 2)
-#	define	TPS_VCORE_LP_1_1V (2 << 2)
-#	define	TPS_VCORE_LP_1_0V (1 << 2)
-#	define	TPS_VCORE_LP_0_85V (0 << 2)
-#	define	TPS_VIB		(1 << 1)
-#	define	TPS_VCORE_DISCH	(1 << 0)
-#define	TPS_VREGS1		0x0e
-#	define	TPS_LDO2_ENABLE	(1 << 7)
-#	define	TPS_LDO2_OFF	(1 << 6)
-#	define	TPS_VLDO2_3_0V	(3 << 4)
-#	define	TPS_VLDO2_2_75V	(2 << 4)
-#	define	TPS_VLDO2_2_5V	(1 << 4)
-#	define	TPS_VLDO2_1_8V	(0 << 4)
-#	define	TPS_LDO1_ENABLE	(1 << 3)
-#	define	TPS_LDO1_OFF	(1 << 2)
-#	define	TPS_VLDO1_3_0V	(3 << 0)
-#	define	TPS_VLDO1_2_75V	(2 << 0)
-#	define	TPS_VLDO1_2_5V	(1 << 0)
-#	define	TPS_VLDO1_ADJ	(0 << 0)
-#define	TPS_MASK3		0x0f
-#define	TPS_DEFGPIO		0x10
-
-/*
- * ----------------------------------------------------------------------------
- * Macros used by exported functions
- * ----------------------------------------------------------------------------
- */
-
-#define LED1  1
-#define LED2  2
-#define OFF   0
-#define ON    1
-#define BLINK 2
-#define GPIO1 1
-#define GPIO2 2
-#define GPIO3 3
-#define GPIO4 4
-#define LOW   0
-#define HIGH  1
-
-/*
- * ----------------------------------------------------------------------------
- * Exported functions
- * ----------------------------------------------------------------------------
- */
-
-/* Draw from VBUS:
- *   0 mA -- DON'T DRAW (might supply power instead)
- * 100 mA -- usb unit load (slowest charge rate)
- * 500 mA -- usb high power (fast battery charge)
- */
-extern int tps65010_set_vbus_draw(unsigned mA);
-
-/* tps65010_set_gpio_out_value parameter:
- * gpio:  GPIO1, GPIO2, GPIO3 or GPIO4
- * value: LOW or HIGH
- */
-extern int tps65010_set_gpio_out_value(unsigned gpio, unsigned value);
-
-/* tps65010_set_led parameter:
- * led:  LED1 or LED2
- * mode: ON, OFF or BLINK
- */
-extern int tps65010_set_led(unsigned led, unsigned mode);
-
-/* tps65010_set_vib parameter:
- * value: ON or OFF
- */
-extern int tps65010_set_vib(unsigned value);
-
-/* tps65010_set_low_pwr parameter:
- * mode: ON or OFF
- */
-extern int tps65010_set_low_pwr(unsigned mode);
-
-/* tps65010_config_vregs1 parameter:
- * value to be written to VREGS1 register
- * Note: The complete register is written, set all bits you need
- */
-extern int tps65010_config_vregs1(unsigned value);
-
-/* tps65013_set_low_pwr parameter:
- * mode: ON or OFF
- */
-extern int tps65013_set_low_pwr(unsigned mode);
-
-/* tps65010_set_vdcdc2
- *  value to be written to VDCDC2
- */
-extern int tps65010_config_vdcdc2(unsigned value);
-
-struct i2c_client;
-
-/**
- * struct tps65010_board - packages GPIO and LED lines
- * @base: the GPIO number to assign to GPIO-1
- * @outmask: bit (N-1) is set to allow GPIO-N to be used as an
- *	(open drain) output
- * @setup: optional callback issued once the GPIOs are valid
- * @teardown: optional callback issued before the GPIOs are invalidated
- * @context: optional parameter passed to setup() and teardown()
- *
- * Board data may be used to package the GPIO (and LED) lines for use
- * in by the generic GPIO and LED frameworks.  The first four GPIOs
- * starting at gpio_base are GPIO1..GPIO4.  The next two are LED1/nPG
- * and LED2 (with hardware blinking capability, not currently exposed).
- *
- * The @setup callback may be used with the kind of board-specific glue
- * which hands the (now-valid) GPIOs to other drivers, or which puts
- * devices in their initial states using these GPIOs.
- */
-struct tps65010_board {
-	int				base;
-	unsigned			outmask;
-
-	int		(*setup)(struct i2c_client *client, void *context);
-	int		(*teardown)(struct i2c_client *client, void *context);
-	void		*context;
-};
-
-#endif /*  __LINUX_I2C_TPS65010_H */
-
diff --git a/ANDROID_3.4.5/include/linux/i2c/tsc2007.h b/ANDROID_3.4.5/include/linux/i2c/tsc2007.h
deleted file mode 100644
index 506a9f7a..00000000
--- a/ANDROID_3.4.5/include/linux/i2c/tsc2007.h
+++ /dev/null
@@ -1,24 +0,0 @@
-#ifndef __LINUX_I2C_TSC2007_H
-#define __LINUX_I2C_TSC2007_H
-
-/* linux/i2c/tsc2007.h */
-
-struct tsc2007_platform_data {
-	u16	model;				/* 2007. */
-	u16	x_plate_ohms;	/* must be non-zero value */
-	u16	max_rt; /* max. resistance above which samples are ignored */
-	unsigned long poll_delay; /* delay (in ms) after pen-down event
-				     before polling starts */
-	unsigned long poll_period; /* time (in ms) between samples */
-	int	fuzzx; /* fuzz factor for X, Y and pressure axes */
-	int	fuzzy;
-	int	fuzzz;
-
-	int	(*get_pendown_state)(void);
-	void	(*clear_penirq)(void);		/* If needed, clear 2nd level
-						   interrupt source */
-	int	(*init_platform_hw)(void);
-	void	(*exit_platform_hw)(void);
-};
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/i2c/twl.h b/ANDROID_3.4.5/include/linux/i2c/twl.h
deleted file mode 100644
index 1f90de0c..00000000
--- a/ANDROID_3.4.5/include/linux/i2c/twl.h
+++ /dev/null
@@ -1,846 +0,0 @@
-/*
- * twl4030.h - header for TWL4030 PM and audio CODEC device
- *
- * Copyright (C) 2005-2006 Texas Instruments, Inc.
- *
- * Based on tlv320aic23.c:
- * Copyright (c) by Kai Svahn <kai.svahn@nokia.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
- *
- */
-
-#ifndef __TWL_H_
-#define __TWL_H_
-
-#include <linux/types.h>
-#include <linux/input/matrix_keypad.h>
-
-/*
- * Using the twl4030 core we address registers using a pair
- *	{ module id, relative register offset }
- * which that core then maps to the relevant
- *	{ i2c slave, absolute register address }
- *
- * The module IDs are meaningful only to the twl4030 core code,
- * which uses them as array indices to look up the first register
- * address each module uses within a given i2c slave.
- */
-
-/* Slave 0 (i2c address 0x48) */
-#define TWL4030_MODULE_USB		0x00
-
-/* Slave 1 (i2c address 0x49) */
-#define TWL4030_MODULE_AUDIO_VOICE	0x01
-#define TWL4030_MODULE_GPIO		0x02
-#define TWL4030_MODULE_INTBR		0x03
-#define TWL4030_MODULE_PIH		0x04
-#define TWL4030_MODULE_TEST		0x05
-
-/* Slave 2 (i2c address 0x4a) */
-#define TWL4030_MODULE_KEYPAD		0x06
-#define TWL4030_MODULE_MADC		0x07
-#define TWL4030_MODULE_INTERRUPTS	0x08
-#define TWL4030_MODULE_LED		0x09
-#define TWL4030_MODULE_MAIN_CHARGE	0x0A
-#define TWL4030_MODULE_PRECHARGE	0x0B
-#define TWL4030_MODULE_PWM0		0x0C
-#define TWL4030_MODULE_PWM1		0x0D
-#define TWL4030_MODULE_PWMA		0x0E
-#define TWL4030_MODULE_PWMB		0x0F
-
-#define TWL5031_MODULE_ACCESSORY	0x10
-#define TWL5031_MODULE_INTERRUPTS	0x11
-
-/* Slave 3 (i2c address 0x4b) */
-#define TWL4030_MODULE_BACKUP		0x12
-#define TWL4030_MODULE_INT		0x13
-#define TWL4030_MODULE_PM_MASTER	0x14
-#define TWL4030_MODULE_PM_RECEIVER	0x15
-#define TWL4030_MODULE_RTC		0x16
-#define TWL4030_MODULE_SECURED_REG	0x17
-
-#define TWL_MODULE_USB		TWL4030_MODULE_USB
-#define TWL_MODULE_AUDIO_VOICE	TWL4030_MODULE_AUDIO_VOICE
-#define TWL_MODULE_PIH		TWL4030_MODULE_PIH
-#define TWL_MODULE_MADC		TWL4030_MODULE_MADC
-#define TWL_MODULE_MAIN_CHARGE	TWL4030_MODULE_MAIN_CHARGE
-#define TWL_MODULE_PM_MASTER	TWL4030_MODULE_PM_MASTER
-#define TWL_MODULE_PM_RECEIVER	TWL4030_MODULE_PM_RECEIVER
-#define TWL_MODULE_RTC		TWL4030_MODULE_RTC
-#define TWL_MODULE_PWM		TWL4030_MODULE_PWM0
-
-#define TWL6030_MODULE_ID0	0x0D
-#define TWL6030_MODULE_ID1	0x0E
-#define TWL6030_MODULE_ID2	0x0F
-
-#define GPIO_INTR_OFFSET	0
-#define KEYPAD_INTR_OFFSET	1
-#define BCI_INTR_OFFSET		2
-#define MADC_INTR_OFFSET	3
-#define USB_INTR_OFFSET		4
-#define CHARGERFAULT_INTR_OFFSET 5
-#define BCI_PRES_INTR_OFFSET	9
-#define USB_PRES_INTR_OFFSET	10
-#define RTC_INTR_OFFSET		11
-
-/*
- * Offset from TWL6030_IRQ_BASE / pdata->irq_base
- */
-#define PWR_INTR_OFFSET		0
-#define HOTDIE_INTR_OFFSET	12
-#define SMPSLDO_INTR_OFFSET	13
-#define BATDETECT_INTR_OFFSET	14
-#define SIMDETECT_INTR_OFFSET	15
-#define MMCDETECT_INTR_OFFSET	16
-#define GASGAUGE_INTR_OFFSET	17
-#define USBOTG_INTR_OFFSET	4
-#define CHARGER_INTR_OFFSET	2
-#define RSV_INTR_OFFSET		0
-
-/* INT register offsets */
-#define REG_INT_STS_A			0x00
-#define REG_INT_STS_B			0x01
-#define REG_INT_STS_C			0x02
-
-#define REG_INT_MSK_LINE_A		0x03
-#define REG_INT_MSK_LINE_B		0x04
-#define REG_INT_MSK_LINE_C		0x05
-
-#define REG_INT_MSK_STS_A		0x06
-#define REG_INT_MSK_STS_B		0x07
-#define REG_INT_MSK_STS_C		0x08
-
-/* MASK INT REG GROUP A */
-#define TWL6030_PWR_INT_MASK 		0x07
-#define TWL6030_RTC_INT_MASK 		0x18
-#define TWL6030_HOTDIE_INT_MASK 	0x20
-#define TWL6030_SMPSLDOA_INT_MASK	0xC0
-
-/* MASK INT REG GROUP B */
-#define TWL6030_SMPSLDOB_INT_MASK 	0x01
-#define TWL6030_BATDETECT_INT_MASK 	0x02
-#define TWL6030_SIMDETECT_INT_MASK 	0x04
-#define TWL6030_MMCDETECT_INT_MASK 	0x08
-#define TWL6030_GPADC_INT_MASK 		0x60
-#define TWL6030_GASGAUGE_INT_MASK 	0x80
-
-/* MASK INT REG GROUP C */
-#define TWL6030_USBOTG_INT_MASK  	0x0F
-#define TWL6030_CHARGER_CTRL_INT_MASK 	0x10
-#define TWL6030_CHARGER_FAULT_INT_MASK 	0x60
-
-#define TWL6030_MMCCTRL		0xEE
-#define VMMC_AUTO_OFF			(0x1 << 3)
-#define SW_FC				(0x1 << 2)
-#define STS_MMC			0x1
-
-#define TWL6030_CFG_INPUT_PUPD3	0xF2
-#define MMC_PU				(0x1 << 3)
-#define MMC_PD				(0x1 << 2)
-
-#define TWL_SIL_TYPE(rev)		((rev) & 0x00FFFFFF)
-#define TWL_SIL_REV(rev)		((rev) >> 24)
-#define TWL_SIL_5030			0x09002F
-#define TWL5030_REV_1_0			0x00
-#define TWL5030_REV_1_1			0x10
-#define TWL5030_REV_1_2			0x30
-
-#define TWL4030_CLASS_ID 		0x4030
-#define TWL6030_CLASS_ID 		0x6030
-unsigned int twl_rev(void);
-#define GET_TWL_REV (twl_rev())
-#define TWL_CLASS_IS(class, id)			\
-static inline int twl_class_is_ ##class(void)	\
-{						\
-	return ((id) == (GET_TWL_REV)) ? 1 : 0;	\
-}
-
-TWL_CLASS_IS(4030, TWL4030_CLASS_ID)
-TWL_CLASS_IS(6030, TWL6030_CLASS_ID)
-
-#define TWL6025_SUBCLASS	BIT(4)  /* TWL6025 has changed registers */
-
-/*
- * Read and write single 8-bit registers
- */
-int twl_i2c_write_u8(u8 mod_no, u8 val, u8 reg);
-int twl_i2c_read_u8(u8 mod_no, u8 *val, u8 reg);
-
-/*
- * Read and write several 8-bit registers at once.
- *
- * IMPORTANT:  For twl_i2c_write(), allocate num_bytes + 1
- * for the value, and populate your data starting at offset 1.
- */
-int twl_i2c_write(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes);
-int twl_i2c_read(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes);
-
-int twl_get_type(void);
-int twl_get_version(void);
-
-int twl6030_interrupt_unmask(u8 bit_mask, u8 offset);
-int twl6030_interrupt_mask(u8 bit_mask, u8 offset);
-
-/* Card detect Configuration for MMC1 Controller on OMAP4 */
-#ifdef CONFIG_TWL4030_CORE
-int twl6030_mmc_card_detect_config(void);
-#else
-static inline int twl6030_mmc_card_detect_config(void)
-{
-	pr_debug("twl6030_mmc_card_detect_config not supported\n");
-	return 0;
-}
-#endif
-
-/* MMC1 Controller on OMAP4 uses Phoenix irq for Card detect */
-#ifdef CONFIG_TWL4030_CORE
-int twl6030_mmc_card_detect(struct device *dev, int slot);
-#else
-static inline int twl6030_mmc_card_detect(struct device *dev, int slot)
-{
-	pr_debug("Call back twl6030_mmc_card_detect not supported\n");
-	return -EIO;
-}
-#endif
-/*----------------------------------------------------------------------*/
-
-/*
- * NOTE:  at up to 1024 registers, this is a big chip.
- *
- * Avoid putting register declarations in this file, instead of into
- * a driver-private file, unless some of the registers in a block
- * need to be shared with other drivers.  One example is blocks that
- * have Secondary IRQ Handler (SIH) registers.
- */
-
-#define TWL4030_SIH_CTRL_EXCLEN_MASK	BIT(0)
-#define TWL4030_SIH_CTRL_PENDDIS_MASK	BIT(1)
-#define TWL4030_SIH_CTRL_COR_MASK	BIT(2)
-
-/*----------------------------------------------------------------------*/
-
-/*
- * GPIO Block Register offsets (use TWL4030_MODULE_GPIO)
- */
-
-#define REG_GPIODATAIN1			0x0
-#define REG_GPIODATAIN2			0x1
-#define REG_GPIODATAIN3			0x2
-#define REG_GPIODATADIR1		0x3
-#define REG_GPIODATADIR2		0x4
-#define REG_GPIODATADIR3		0x5
-#define REG_GPIODATAOUT1		0x6
-#define REG_GPIODATAOUT2		0x7
-#define REG_GPIODATAOUT3		0x8
-#define REG_CLEARGPIODATAOUT1		0x9
-#define REG_CLEARGPIODATAOUT2		0xA
-#define REG_CLEARGPIODATAOUT3		0xB
-#define REG_SETGPIODATAOUT1		0xC
-#define REG_SETGPIODATAOUT2		0xD
-#define REG_SETGPIODATAOUT3		0xE
-#define REG_GPIO_DEBEN1			0xF
-#define REG_GPIO_DEBEN2			0x10
-#define REG_GPIO_DEBEN3			0x11
-#define REG_GPIO_CTRL			0x12
-#define REG_GPIOPUPDCTR1		0x13
-#define REG_GPIOPUPDCTR2		0x14
-#define REG_GPIOPUPDCTR3		0x15
-#define REG_GPIOPUPDCTR4		0x16
-#define REG_GPIOPUPDCTR5		0x17
-#define REG_GPIO_ISR1A			0x19
-#define REG_GPIO_ISR2A			0x1A
-#define REG_GPIO_ISR3A			0x1B
-#define REG_GPIO_IMR1A			0x1C
-#define REG_GPIO_IMR2A			0x1D
-#define REG_GPIO_IMR3A			0x1E
-#define REG_GPIO_ISR1B			0x1F
-#define REG_GPIO_ISR2B			0x20
-#define REG_GPIO_ISR3B			0x21
-#define REG_GPIO_IMR1B			0x22
-#define REG_GPIO_IMR2B			0x23
-#define REG_GPIO_IMR3B			0x24
-#define REG_GPIO_EDR1			0x28
-#define REG_GPIO_EDR2			0x29
-#define REG_GPIO_EDR3			0x2A
-#define REG_GPIO_EDR4			0x2B
-#define REG_GPIO_EDR5			0x2C
-#define REG_GPIO_SIH_CTRL		0x2D
-
-/* Up to 18 signals are available as GPIOs, when their
- * pins are not assigned to another use (such as ULPI/USB).
- */
-#define TWL4030_GPIO_MAX		18
-
-/*----------------------------------------------------------------------*/
-
-/*Interface Bit Register (INTBR) offsets
- *(Use TWL_4030_MODULE_INTBR)
- */
-
-#define REG_IDCODE_7_0			0x00
-#define REG_IDCODE_15_8			0x01
-#define REG_IDCODE_16_23		0x02
-#define REG_IDCODE_31_24		0x03
-#define REG_GPPUPDCTR1			0x0F
-#define REG_UNLOCK_TEST_REG		0x12
-
-/*I2C1 and I2C4(SR) SDA/SCL pull-up control bits */
-
-#define I2C_SCL_CTRL_PU			BIT(0)
-#define I2C_SDA_CTRL_PU			BIT(2)
-#define SR_I2C_SCL_CTRL_PU		BIT(4)
-#define SR_I2C_SDA_CTRL_PU		BIT(6)
-
-#define TWL_EEPROM_R_UNLOCK		0x49
-
-/*----------------------------------------------------------------------*/
-
-/*
- * Keypad register offsets (use TWL4030_MODULE_KEYPAD)
- * ... SIH/interrupt only
- */
-
-#define TWL4030_KEYPAD_KEYP_ISR1	0x11
-#define TWL4030_KEYPAD_KEYP_IMR1	0x12
-#define TWL4030_KEYPAD_KEYP_ISR2	0x13
-#define TWL4030_KEYPAD_KEYP_IMR2	0x14
-#define TWL4030_KEYPAD_KEYP_SIR		0x15	/* test register */
-#define TWL4030_KEYPAD_KEYP_EDR		0x16
-#define TWL4030_KEYPAD_KEYP_SIH_CTRL	0x17
-
-/*----------------------------------------------------------------------*/
-
-/*
- * Multichannel ADC register offsets (use TWL4030_MODULE_MADC)
- * ... SIH/interrupt only
- */
-
-#define TWL4030_MADC_ISR1		0x61
-#define TWL4030_MADC_IMR1		0x62
-#define TWL4030_MADC_ISR2		0x63
-#define TWL4030_MADC_IMR2		0x64
-#define TWL4030_MADC_SIR		0x65	/* test register */
-#define TWL4030_MADC_EDR		0x66
-#define TWL4030_MADC_SIH_CTRL		0x67
-
-/*----------------------------------------------------------------------*/
-
-/*
- * Battery charger register offsets (use TWL4030_MODULE_INTERRUPTS)
- */
-
-#define TWL4030_INTERRUPTS_BCIISR1A	0x0
-#define TWL4030_INTERRUPTS_BCIISR2A	0x1
-#define TWL4030_INTERRUPTS_BCIIMR1A	0x2
-#define TWL4030_INTERRUPTS_BCIIMR2A	0x3
-#define TWL4030_INTERRUPTS_BCIISR1B	0x4
-#define TWL4030_INTERRUPTS_BCIISR2B	0x5
-#define TWL4030_INTERRUPTS_BCIIMR1B	0x6
-#define TWL4030_INTERRUPTS_BCIIMR2B	0x7
-#define TWL4030_INTERRUPTS_BCISIR1	0x8	/* test register */
-#define TWL4030_INTERRUPTS_BCISIR2	0x9	/* test register */
-#define TWL4030_INTERRUPTS_BCIEDR1	0xa
-#define TWL4030_INTERRUPTS_BCIEDR2	0xb
-#define TWL4030_INTERRUPTS_BCIEDR3	0xc
-#define TWL4030_INTERRUPTS_BCISIHCTRL	0xd
-
-/*----------------------------------------------------------------------*/
-
-/*
- * Power Interrupt block register offsets (use TWL4030_MODULE_INT)
- */
-
-#define TWL4030_INT_PWR_ISR1		0x0
-#define TWL4030_INT_PWR_IMR1		0x1
-#define TWL4030_INT_PWR_ISR2		0x2
-#define TWL4030_INT_PWR_IMR2		0x3
-#define TWL4030_INT_PWR_SIR		0x4	/* test register */
-#define TWL4030_INT_PWR_EDR1		0x5
-#define TWL4030_INT_PWR_EDR2		0x6
-#define TWL4030_INT_PWR_SIH_CTRL	0x7
-
-/*----------------------------------------------------------------------*/
-
-/*
- * Accessory Interrupts
- */
-#define TWL5031_ACIIMR_LSB		0x05
-#define TWL5031_ACIIMR_MSB		0x06
-#define TWL5031_ACIIDR_LSB		0x07
-#define TWL5031_ACIIDR_MSB		0x08
-#define TWL5031_ACCISR1			0x0F
-#define TWL5031_ACCIMR1			0x10
-#define TWL5031_ACCISR2			0x11
-#define TWL5031_ACCIMR2			0x12
-#define TWL5031_ACCSIR			0x13
-#define TWL5031_ACCEDR1			0x14
-#define TWL5031_ACCSIHCTRL		0x15
-
-/*----------------------------------------------------------------------*/
-
-/*
- * Battery Charger Controller
- */
-
-#define TWL5031_INTERRUPTS_BCIISR1	0x0
-#define TWL5031_INTERRUPTS_BCIIMR1	0x1
-#define TWL5031_INTERRUPTS_BCIISR2	0x2
-#define TWL5031_INTERRUPTS_BCIIMR2	0x3
-#define TWL5031_INTERRUPTS_BCISIR	0x4
-#define TWL5031_INTERRUPTS_BCIEDR1	0x5
-#define TWL5031_INTERRUPTS_BCIEDR2	0x6
-#define TWL5031_INTERRUPTS_BCISIHCTRL	0x7
-
-/*----------------------------------------------------------------------*/
-
-/*
- * PM Master module register offsets (use TWL4030_MODULE_PM_MASTER)
- */
-
-#define TWL4030_PM_MASTER_CFG_P1_TRANSITION	0x00
-#define TWL4030_PM_MASTER_CFG_P2_TRANSITION	0x01
-#define TWL4030_PM_MASTER_CFG_P3_TRANSITION	0x02
-#define TWL4030_PM_MASTER_CFG_P123_TRANSITION	0x03
-#define TWL4030_PM_MASTER_STS_BOOT		0x04
-#define TWL4030_PM_MASTER_CFG_BOOT		0x05
-#define TWL4030_PM_MASTER_SHUNDAN		0x06
-#define TWL4030_PM_MASTER_BOOT_BCI		0x07
-#define TWL4030_PM_MASTER_CFG_PWRANA1		0x08
-#define TWL4030_PM_MASTER_CFG_PWRANA2		0x09
-#define TWL4030_PM_MASTER_BACKUP_MISC_STS	0x0b
-#define TWL4030_PM_MASTER_BACKUP_MISC_CFG	0x0c
-#define TWL4030_PM_MASTER_BACKUP_MISC_TST	0x0d
-#define TWL4030_PM_MASTER_PROTECT_KEY		0x0e
-#define TWL4030_PM_MASTER_STS_HW_CONDITIONS	0x0f
-#define TWL4030_PM_MASTER_P1_SW_EVENTS		0x10
-#define TWL4030_PM_MASTER_P2_SW_EVENTS		0x11
-#define TWL4030_PM_MASTER_P3_SW_EVENTS		0x12
-#define TWL4030_PM_MASTER_STS_P123_STATE	0x13
-#define TWL4030_PM_MASTER_PB_CFG		0x14
-#define TWL4030_PM_MASTER_PB_WORD_MSB		0x15
-#define TWL4030_PM_MASTER_PB_WORD_LSB		0x16
-#define TWL4030_PM_MASTER_SEQ_ADD_W2P		0x1c
-#define TWL4030_PM_MASTER_SEQ_ADD_P2A		0x1d
-#define TWL4030_PM_MASTER_SEQ_ADD_A2W		0x1e
-#define TWL4030_PM_MASTER_SEQ_ADD_A2S		0x1f
-#define TWL4030_PM_MASTER_SEQ_ADD_S2A12		0x20
-#define TWL4030_PM_MASTER_SEQ_ADD_S2A3		0x21
-#define TWL4030_PM_MASTER_SEQ_ADD_WARM		0x22
-#define TWL4030_PM_MASTER_MEMORY_ADDRESS	0x23
-#define TWL4030_PM_MASTER_MEMORY_DATA		0x24
-
-#define TWL4030_PM_MASTER_KEY_CFG1		0xc0
-#define TWL4030_PM_MASTER_KEY_CFG2		0x0c
-
-#define TWL4030_PM_MASTER_KEY_TST1		0xe0
-#define TWL4030_PM_MASTER_KEY_TST2		0x0e
-
-#define TWL4030_PM_MASTER_GLOBAL_TST		0xb6
-
-/*----------------------------------------------------------------------*/
-
-/* Power bus message definitions */
-
-/* The TWL4030/5030 splits its power-management resources (the various
- * regulators, clock and reset lines) into 3 processor groups - P1, P2 and
- * P3. These groups can then be configured to transition between sleep, wait-on
- * and active states by sending messages to the power bus.  See Section 5.4.2
- * Power Resources of TWL4030 TRM
- */
-
-/* Processor groups */
-#define DEV_GRP_NULL		0x0
-#define DEV_GRP_P1		0x1	/* P1: all OMAP devices */
-#define DEV_GRP_P2		0x2	/* P2: all Modem devices */
-#define DEV_GRP_P3		0x4	/* P3: all peripheral devices */
-
-/* Resource groups */
-#define RES_GRP_RES		0x0	/* Reserved */
-#define RES_GRP_PP		0x1	/* Power providers */
-#define RES_GRP_RC		0x2	/* Reset and control */
-#define RES_GRP_PP_RC		0x3
-#define RES_GRP_PR		0x4	/* Power references */
-#define RES_GRP_PP_PR		0x5
-#define RES_GRP_RC_PR		0x6
-#define RES_GRP_ALL		0x7	/* All resource groups */
-
-#define RES_TYPE2_R0		0x0
-
-#define RES_TYPE_ALL		0x7
-
-/* Resource states */
-#define RES_STATE_WRST		0xF
-#define RES_STATE_ACTIVE	0xE
-#define RES_STATE_SLEEP		0x8
-#define RES_STATE_OFF		0x0
-
-/* Power resources */
-
-/* Power providers */
-#define RES_VAUX1               1
-#define RES_VAUX2               2
-#define RES_VAUX3               3
-#define RES_VAUX4               4
-#define RES_VMMC1               5
-#define RES_VMMC2               6
-#define RES_VPLL1               7
-#define RES_VPLL2               8
-#define RES_VSIM                9
-#define RES_VDAC                10
-#define RES_VINTANA1            11
-#define RES_VINTANA2            12
-#define RES_VINTDIG             13
-#define RES_VIO                 14
-#define RES_VDD1                15
-#define RES_VDD2                16
-#define RES_VUSB_1V5            17
-#define RES_VUSB_1V8            18
-#define RES_VUSB_3V1            19
-#define RES_VUSBCP              20
-#define RES_REGEN               21
-/* Reset and control */
-#define RES_NRES_PWRON          22
-#define RES_CLKEN               23
-#define RES_SYSEN               24
-#define RES_HFCLKOUT            25
-#define RES_32KCLKOUT           26
-#define RES_RESET               27
-/* Power Reference */
-#define RES_MAIN_REF            28
-
-#define TOTAL_RESOURCES		28
-/*
- * Power Bus Message Format ... these can be sent individually by Linux,
- * but are usually part of downloaded scripts that are run when various
- * power events are triggered.
- *
- *  Broadcast Message (16 Bits):
- *    DEV_GRP[15:13] MT[12]  RES_GRP[11:9]  RES_TYPE2[8:7] RES_TYPE[6:4]
- *    RES_STATE[3:0]
- *
- *  Singular Message (16 Bits):
- *    DEV_GRP[15:13] MT[12]  RES_ID[11:4]  RES_STATE[3:0]
- */
-
-#define MSG_BROADCAST(devgrp, grp, type, type2, state) \
-	( (devgrp) << 13 | 1 << 12 | (grp) << 9 | (type2) << 7 \
-	| (type) << 4 | (state))
-
-#define MSG_SINGULAR(devgrp, id, state) \
-	((devgrp) << 13 | 0 << 12 | (id) << 4 | (state))
-
-#define MSG_BROADCAST_ALL(devgrp, state) \
-	((devgrp) << 5 | (state))
-
-#define MSG_BROADCAST_REF MSG_BROADCAST_ALL
-#define MSG_BROADCAST_PROV MSG_BROADCAST_ALL
-#define MSG_BROADCAST__CLK_RST MSG_BROADCAST_ALL
-/*----------------------------------------------------------------------*/
-
-struct twl4030_clock_init_data {
-	bool ck32k_lowpwr_enable;
-};
-
-struct twl4030_bci_platform_data {
-	int *battery_tmp_tbl;
-	unsigned int tblsize;
-};
-
-/* TWL4030_GPIO_MAX (18) GPIOs, with interrupts */
-struct twl4030_gpio_platform_data {
-	int		gpio_base;
-	unsigned	irq_base, irq_end;
-
-	/* package the two LED signals as output-only GPIOs? */
-	bool		use_leds;
-
-	/* gpio-n should control VMMC(n+1) if BIT(n) in mmc_cd is set */
-	u8		mmc_cd;
-
-	/* if BIT(N) is set, or VMMC(n+1) is linked, debounce GPIO-N */
-	u32		debounce;
-
-	/* For gpio-N, bit (1 << N) in "pullups" is set if that pullup
-	 * should be enabled.  Else, if that bit is set in "pulldowns",
-	 * that pulldown is enabled.  Don't waste power by letting any
-	 * digital inputs float...
-	 */
-	u32		pullups;
-	u32		pulldowns;
-
-	int		(*setup)(struct device *dev,
-				unsigned gpio, unsigned ngpio);
-	int		(*teardown)(struct device *dev,
-				unsigned gpio, unsigned ngpio);
-};
-
-struct twl4030_madc_platform_data {
-	int		irq_line;
-};
-
-/* Boards have unique mappings of {row, col} --> keycode.
- * Column and row are 8 bits each, but range only from 0..7.
- * a PERSISTENT_KEY is "always on" and never reported.
- */
-#define PERSISTENT_KEY(r, c)	KEY((r), (c), KEY_RESERVED)
-
-struct twl4030_keypad_data {
-	const struct matrix_keymap_data *keymap_data;
-	unsigned rows;
-	unsigned cols;
-	bool rep;
-};
-
-enum twl4030_usb_mode {
-	T2_USB_MODE_ULPI = 1,
-	T2_USB_MODE_CEA2011_3PIN = 2,
-};
-
-struct twl4030_usb_data {
-	enum twl4030_usb_mode	usb_mode;
-	unsigned long		features;
-
-	int		(*phy_init)(struct device *dev);
-	int		(*phy_exit)(struct device *dev);
-	/* Power on/off the PHY */
-	int		(*phy_power)(struct device *dev, int iD, int on);
-	/* enable/disable  phy clocks */
-	int		(*phy_set_clock)(struct device *dev, int on);
-	/* suspend/resume of phy */
-	int		(*phy_suspend)(struct device *dev, int suspend);
-};
-
-struct twl4030_ins {
-	u16 pmb_message;
-	u8 delay;
-};
-
-struct twl4030_script {
-	struct twl4030_ins *script;
-	unsigned size;
-	u8 flags;
-#define TWL4030_WRST_SCRIPT	(1<<0)
-#define TWL4030_WAKEUP12_SCRIPT	(1<<1)
-#define TWL4030_WAKEUP3_SCRIPT	(1<<2)
-#define TWL4030_SLEEP_SCRIPT	(1<<3)
-};
-
-struct twl4030_resconfig {
-	u8 resource;
-	u8 devgroup;	/* Processor group that Power resource belongs to */
-	u8 type;	/* Power resource addressed, 6 / broadcast message */
-	u8 type2;	/* Power resource addressed, 3 / broadcast message */
-	u8 remap_off;	/* off state remapping */
-	u8 remap_sleep;	/* sleep state remapping */
-};
-
-struct twl4030_power_data {
-	struct twl4030_script **scripts;
-	unsigned num;
-	struct twl4030_resconfig *resource_config;
-#define TWL4030_RESCONFIG_UNDEF	((u8)-1)
-	bool use_poweroff;	/* Board is wired for TWL poweroff */
-};
-
-extern void twl4030_power_init(struct twl4030_power_data *triton2_scripts);
-extern int twl4030_remove_script(u8 flags);
-extern void twl4030_power_off(void);
-
-struct twl4030_codec_data {
-	unsigned int digimic_delay; /* in ms */
-	unsigned int ramp_delay_value;
-	unsigned int offset_cncl_path;
-	unsigned int check_defaults:1;
-	unsigned int reset_registers:1;
-	unsigned int hs_extmute:1;
-	void (*set_hs_extmute)(int mute);
-};
-
-struct twl4030_vibra_data {
-	unsigned int	coexist;
-};
-
-struct twl4030_audio_data {
-	unsigned int	audio_mclk;
-	struct twl4030_codec_data *codec;
-	struct twl4030_vibra_data *vibra;
-
-	/* twl6040 */
-	int audpwron_gpio;	/* audio power-on gpio */
-	int naudint_irq;	/* audio interrupt */
-	unsigned int irq_base;
-};
-
-struct twl4030_platform_data {
-	unsigned				irq_base, irq_end;
-	struct twl4030_clock_init_data		*clock;
-	struct twl4030_bci_platform_data	*bci;
-	struct twl4030_gpio_platform_data	*gpio;
-	struct twl4030_madc_platform_data	*madc;
-	struct twl4030_keypad_data		*keypad;
-	struct twl4030_usb_data			*usb;
-	struct twl4030_power_data		*power;
-	struct twl4030_audio_data		*audio;
-
-	/* Common LDO regulators for TWL4030/TWL6030 */
-	struct regulator_init_data		*vdac;
-	struct regulator_init_data		*vaux1;
-	struct regulator_init_data		*vaux2;
-	struct regulator_init_data		*vaux3;
-	struct regulator_init_data		*vdd1;
-	struct regulator_init_data		*vdd2;
-	struct regulator_init_data		*vdd3;
-	/* TWL4030 LDO regulators */
-	struct regulator_init_data		*vpll1;
-	struct regulator_init_data		*vpll2;
-	struct regulator_init_data		*vmmc1;
-	struct regulator_init_data		*vmmc2;
-	struct regulator_init_data		*vsim;
-	struct regulator_init_data		*vaux4;
-	struct regulator_init_data		*vio;
-	struct regulator_init_data		*vintana1;
-	struct regulator_init_data		*vintana2;
-	struct regulator_init_data		*vintdig;
-	/* TWL6030 LDO regulators */
-	struct regulator_init_data              *vmmc;
-	struct regulator_init_data              *vpp;
-	struct regulator_init_data              *vusim;
-	struct regulator_init_data              *vana;
-	struct regulator_init_data              *vcxio;
-	struct regulator_init_data              *vusb;
-	struct regulator_init_data		*clk32kg;
-	struct regulator_init_data              *v1v8;
-	struct regulator_init_data              *v2v1;
-	/* TWL6025 LDO regulators */
-	struct regulator_init_data		*ldo1;
-	struct regulator_init_data		*ldo2;
-	struct regulator_init_data		*ldo3;
-	struct regulator_init_data		*ldo4;
-	struct regulator_init_data		*ldo5;
-	struct regulator_init_data		*ldo6;
-	struct regulator_init_data		*ldo7;
-	struct regulator_init_data		*ldoln;
-	struct regulator_init_data		*ldousb;
-	/* TWL6025 DCDC regulators */
-	struct regulator_init_data		*smps3;
-	struct regulator_init_data		*smps4;
-	struct regulator_init_data		*vio6025;
-};
-
-struct twl_regulator_driver_data {
-	int		(*set_voltage)(void *data, int target_uV);
-	int		(*get_voltage)(void *data);
-	void		*data;
-	unsigned long	features;
-};
-
-/*----------------------------------------------------------------------*/
-
-int twl4030_sih_setup(struct device *dev, int module, int irq_base);
-
-/* Offsets to Power Registers */
-#define TWL4030_VDAC_DEV_GRP		0x3B
-#define TWL4030_VDAC_DEDICATED		0x3E
-#define TWL4030_VAUX1_DEV_GRP		0x17
-#define TWL4030_VAUX1_DEDICATED		0x1A
-#define TWL4030_VAUX2_DEV_GRP		0x1B
-#define TWL4030_VAUX2_DEDICATED		0x1E
-#define TWL4030_VAUX3_DEV_GRP		0x1F
-#define TWL4030_VAUX3_DEDICATED		0x22
-
-static inline int twl4030charger_usb_en(int enable) { return 0; }
-
-/*----------------------------------------------------------------------*/
-
-/* Linux-specific regulator identifiers ... for now, we only support
- * the LDOs, and leave the three buck converters alone.  VDD1 and VDD2
- * need to tie into hardware based voltage scaling (cpufreq etc), while
- * VIO is generally fixed.
- */
-
-/* TWL4030 SMPS/LDO's */
-/* EXTERNAL dc-to-dc buck converters */
-#define TWL4030_REG_VDD1	0
-#define TWL4030_REG_VDD2	1
-#define TWL4030_REG_VIO		2
-
-/* EXTERNAL LDOs */
-#define TWL4030_REG_VDAC	3
-#define TWL4030_REG_VPLL1	4
-#define TWL4030_REG_VPLL2	5	/* not on all chips */
-#define TWL4030_REG_VMMC1	6
-#define TWL4030_REG_VMMC2	7	/* not on all chips */
-#define TWL4030_REG_VSIM	8	/* not on all chips */
-#define TWL4030_REG_VAUX1	9	/* not on all chips */
-#define TWL4030_REG_VAUX2_4030	10	/* (twl4030-specific) */
-#define TWL4030_REG_VAUX2	11	/* (twl5030 and newer) */
-#define TWL4030_REG_VAUX3	12	/* not on all chips */
-#define TWL4030_REG_VAUX4	13	/* not on all chips */
-
-/* INTERNAL LDOs */
-#define TWL4030_REG_VINTANA1	14
-#define TWL4030_REG_VINTANA2	15
-#define TWL4030_REG_VINTDIG	16
-#define TWL4030_REG_VUSB1V5	17
-#define TWL4030_REG_VUSB1V8	18
-#define TWL4030_REG_VUSB3V1	19
-
-/* TWL6030 SMPS/LDO's */
-/* EXTERNAL dc-to-dc buck convertor controllable via SR */
-#define TWL6030_REG_VDD1	30
-#define TWL6030_REG_VDD2	31
-#define TWL6030_REG_VDD3	32
-
-/* Non SR compliant dc-to-dc buck convertors */
-#define TWL6030_REG_VMEM	33
-#define TWL6030_REG_V2V1	34
-#define TWL6030_REG_V1V29	35
-#define TWL6030_REG_V1V8	36
-
-/* EXTERNAL LDOs */
-#define TWL6030_REG_VAUX1_6030	37
-#define TWL6030_REG_VAUX2_6030	38
-#define TWL6030_REG_VAUX3_6030	39
-#define TWL6030_REG_VMMC	40
-#define TWL6030_REG_VPP		41
-#define TWL6030_REG_VUSIM	42
-#define TWL6030_REG_VANA	43
-#define TWL6030_REG_VCXIO	44
-#define TWL6030_REG_VDAC	45
-#define TWL6030_REG_VUSB	46
-
-/* INTERNAL LDOs */
-#define TWL6030_REG_VRTC	47
-#define TWL6030_REG_CLK32KG	48
-
-/* LDOs on 6025 have different names */
-#define TWL6025_REG_LDO2	49
-#define TWL6025_REG_LDO4	50
-#define TWL6025_REG_LDO3	51
-#define TWL6025_REG_LDO5	52
-#define TWL6025_REG_LDO1	53
-#define TWL6025_REG_LDO7	54
-#define TWL6025_REG_LDO6	55
-#define TWL6025_REG_LDOLN	56
-#define TWL6025_REG_LDOUSB	57
-
-/* 6025 DCDC supplies */
-#define TWL6025_REG_SMPS3	58
-#define TWL6025_REG_SMPS4	59
-#define TWL6025_REG_VIO		60
-
-
-#endif /* End of __TWL4030_H */
diff --git a/ANDROID_3.4.5/include/linux/i2c/twl4030-madc.h b/ANDROID_3.4.5/include/linux/i2c/twl4030-madc.h
deleted file mode 100644
index 530e11ba..00000000
--- a/ANDROID_3.4.5/include/linux/i2c/twl4030-madc.h
+++ /dev/null
@@ -1,145 +0,0 @@
-/*
- * twl4030_madc.h - Header for TWL4030 MADC
- *
- * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
- * J Keerthy <j-keerthy@ti.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- */
-
-#ifndef _TWL4030_MADC_H
-#define _TWL4030_MADC_H
-
-struct twl4030_madc_conversion_method {
-	u8 sel;
-	u8 avg;
-	u8 rbase;
-	u8 ctrl;
-};
-
-#define TWL4030_MADC_MAX_CHANNELS 16
-
-
-/*
- * twl4030_madc_request- madc request packet for channel conversion
- * @channels:	16 bit bitmap for individual channels
- * @do_avgP:	sample the input channel for 4 consecutive cycles
- * @method:	RT, SW1, SW2
- * @type:	Polling or interrupt based method
- */
-
-struct twl4030_madc_request {
-	unsigned long channels;
-	u16 do_avg;
-	u16 method;
-	u16 type;
-	bool active;
-	bool result_pending;
-	int rbuf[TWL4030_MADC_MAX_CHANNELS];
-	void (*func_cb)(int len, int channels, int *buf);
-};
-
-enum conversion_methods {
-	TWL4030_MADC_RT,
-	TWL4030_MADC_SW1,
-	TWL4030_MADC_SW2,
-	TWL4030_MADC_NUM_METHODS
-};
-
-enum sample_type {
-	TWL4030_MADC_WAIT,
-	TWL4030_MADC_IRQ_ONESHOT,
-	TWL4030_MADC_IRQ_REARM
-};
-
-#define TWL4030_MADC_CTRL1		0x00
-#define TWL4030_MADC_CTRL2		0x01
-
-#define TWL4030_MADC_RTSELECT_LSB	0x02
-#define TWL4030_MADC_SW1SELECT_LSB	0x06
-#define TWL4030_MADC_SW2SELECT_LSB	0x0A
-
-#define TWL4030_MADC_RTAVERAGE_LSB	0x04
-#define TWL4030_MADC_SW1AVERAGE_LSB	0x08
-#define TWL4030_MADC_SW2AVERAGE_LSB	0x0C
-
-#define TWL4030_MADC_CTRL_SW1		0x12
-#define TWL4030_MADC_CTRL_SW2		0x13
-
-#define TWL4030_MADC_RTCH0_LSB		0x17
-#define TWL4030_MADC_GPCH0_LSB		0x37
-
-#define TWL4030_MADC_MADCON	(1 << 0)	/* MADC power on */
-#define TWL4030_MADC_BUSY	(1 << 0)	/* MADC busy */
-/* MADC conversion completion */
-#define TWL4030_MADC_EOC_SW	(1 << 1)
-/* MADC SWx start conversion */
-#define TWL4030_MADC_SW_START	(1 << 5)
-#define TWL4030_MADC_ADCIN0	(1 << 0)
-#define TWL4030_MADC_ADCIN1	(1 << 1)
-#define TWL4030_MADC_ADCIN2	(1 << 2)
-#define TWL4030_MADC_ADCIN3	(1 << 3)
-#define TWL4030_MADC_ADCIN4	(1 << 4)
-#define TWL4030_MADC_ADCIN5	(1 << 5)
-#define TWL4030_MADC_ADCIN6	(1 << 6)
-#define TWL4030_MADC_ADCIN7	(1 << 7)
-#define TWL4030_MADC_ADCIN8	(1 << 8)
-#define TWL4030_MADC_ADCIN9	(1 << 9)
-#define TWL4030_MADC_ADCIN10	(1 << 10)
-#define TWL4030_MADC_ADCIN11	(1 << 11)
-#define TWL4030_MADC_ADCIN12	(1 << 12)
-#define TWL4030_MADC_ADCIN13	(1 << 13)
-#define TWL4030_MADC_ADCIN14	(1 << 14)
-#define TWL4030_MADC_ADCIN15	(1 << 15)
-
-/* Fixed channels */
-#define TWL4030_MADC_BTEMP	TWL4030_MADC_ADCIN1
-#define TWL4030_MADC_VBUS	TWL4030_MADC_ADCIN8
-#define TWL4030_MADC_VBKB	TWL4030_MADC_ADCIN9
-#define TWL4030_MADC_ICHG	TWL4030_MADC_ADCIN10
-#define TWL4030_MADC_VCHG	TWL4030_MADC_ADCIN11
-#define TWL4030_MADC_VBAT	TWL4030_MADC_ADCIN12
-
-/* Step size and prescaler ratio */
-#define TEMP_STEP_SIZE          147
-#define TEMP_PSR_R              100
-#define CURR_STEP_SIZE		147
-#define CURR_PSR_R1		44
-#define CURR_PSR_R2		88
-
-#define TWL4030_BCI_BCICTL1	0x23
-#define TWL4030_BCI_CGAIN	0x020
-#define TWL4030_BCI_MESBAT	(1 << 1)
-#define TWL4030_BCI_TYPEN	(1 << 4)
-#define TWL4030_BCI_ITHEN	(1 << 3)
-
-#define REG_BCICTL2             0x024
-#define TWL4030_BCI_ITHSENS	0x007
-
-/* Register and bits for GPBR1 register */
-#define TWL4030_REG_GPBR1		0x0c
-#define TWL4030_GPBR1_MADC_HFCLK_EN	(1 << 7)
-
-struct twl4030_madc_user_parms {
-	int channel;
-	int average;
-	int status;
-	u16 result;
-};
-
-int twl4030_madc_conversion(struct twl4030_madc_request *conv);
-int twl4030_get_madc_conversion(int channel_no);
-#endif
diff --git a/ANDROID_3.4.5/include/linux/i2o-dev.h b/ANDROID_3.4.5/include/linux/i2o-dev.h
deleted file mode 100644
index a0b23dd4..00000000
--- a/ANDROID_3.4.5/include/linux/i2o-dev.h
+++ /dev/null
@@ -1,421 +0,0 @@
-/*
- * I2O user space accessible structures/APIs
- *
- * (c) Copyright 1999, 2000 Red Hat Software
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- *
- *************************************************************************
- *
- * This header file defines the I2O APIs that are available to both
- * the kernel and user level applications.  Kernel specific structures
- * are defined in i2o_osm. OSMs should include _only_ i2o_osm.h which
- * automatically includes this file.
- *
- */
-
-#ifndef _I2O_DEV_H
-#define _I2O_DEV_H
-
-/* How many controllers are we allowing */
-#define MAX_I2O_CONTROLLERS	32
-
-#include <linux/ioctl.h>
-#include <linux/types.h>
-
-/*
- * I2O Control IOCTLs and structures
- */
-#define I2O_MAGIC_NUMBER	'i'
-#define I2OGETIOPS		_IOR(I2O_MAGIC_NUMBER,0,__u8[MAX_I2O_CONTROLLERS])
-#define I2OHRTGET		_IOWR(I2O_MAGIC_NUMBER,1,struct i2o_cmd_hrtlct)
-#define I2OLCTGET		_IOWR(I2O_MAGIC_NUMBER,2,struct i2o_cmd_hrtlct)
-#define I2OPARMSET		_IOWR(I2O_MAGIC_NUMBER,3,struct i2o_cmd_psetget)
-#define I2OPARMGET		_IOWR(I2O_MAGIC_NUMBER,4,struct i2o_cmd_psetget)
-#define I2OSWDL 		_IOWR(I2O_MAGIC_NUMBER,5,struct i2o_sw_xfer)
-#define I2OSWUL 		_IOWR(I2O_MAGIC_NUMBER,6,struct i2o_sw_xfer)
-#define I2OSWDEL		_IOWR(I2O_MAGIC_NUMBER,7,struct i2o_sw_xfer)
-#define I2OVALIDATE		_IOR(I2O_MAGIC_NUMBER,8,__u32)
-#define I2OHTML 		_IOWR(I2O_MAGIC_NUMBER,9,struct i2o_html)
-#define I2OEVTREG		_IOW(I2O_MAGIC_NUMBER,10,struct i2o_evt_id)
-#define I2OEVTGET		_IOR(I2O_MAGIC_NUMBER,11,struct i2o_evt_info)
-#define I2OPASSTHRU		_IOR(I2O_MAGIC_NUMBER,12,struct i2o_cmd_passthru)
-#define I2OPASSTHRU32		_IOR(I2O_MAGIC_NUMBER,12,struct i2o_cmd_passthru32)
-
-struct i2o_cmd_passthru32 {
-	unsigned int iop;	/* IOP unit number */
-	__u32 msg;		/* message */
-};
-
-struct i2o_cmd_passthru {
-	unsigned int iop;	/* IOP unit number */
-	void __user *msg;	/* message */
-};
-
-struct i2o_cmd_hrtlct {
-	unsigned int iop;	/* IOP unit number */
-	void __user *resbuf;	/* Buffer for result */
-	unsigned int __user *reslen;	/* Buffer length in bytes */
-};
-
-struct i2o_cmd_psetget {
-	unsigned int iop;	/* IOP unit number */
-	unsigned int tid;	/* Target device TID */
-	void __user *opbuf;	/* Operation List buffer */
-	unsigned int oplen;	/* Operation List buffer length in bytes */
-	void __user *resbuf;	/* Result List buffer */
-	unsigned int __user *reslen;	/* Result List buffer length in bytes */
-};
-
-struct i2o_sw_xfer {
-	unsigned int iop;	/* IOP unit number */
-	unsigned char flags;	/* Flags field */
-	unsigned char sw_type;	/* Software type */
-	unsigned int sw_id;	/* Software ID */
-	void __user *buf;	/* Pointer to software buffer */
-	unsigned int __user *swlen;	/* Length of software data */
-	unsigned int __user *maxfrag;	/* Maximum fragment count */
-	unsigned int __user *curfrag;	/* Current fragment count */
-};
-
-struct i2o_html {
-	unsigned int iop;	/* IOP unit number */
-	unsigned int tid;	/* Target device ID */
-	unsigned int page;	/* HTML page */
-	void __user *resbuf;	/* Buffer for reply HTML page */
-	unsigned int __user *reslen;	/* Length in bytes of reply buffer */
-	void __user *qbuf;	/* Pointer to HTTP query string */
-	unsigned int qlen;	/* Length in bytes of query string buffer */
-};
-
-#define I2O_EVT_Q_LEN 32
-
-struct i2o_evt_id {
-	unsigned int iop;
-	unsigned int tid;
-	unsigned int evt_mask;
-};
-
-/* Event data size = frame size - message header + evt indicator */
-#define I2O_EVT_DATA_SIZE 88
-
-struct i2o_evt_info {
-	struct i2o_evt_id id;
-	unsigned char evt_data[I2O_EVT_DATA_SIZE];
-	unsigned int data_size;
-};
-
-struct i2o_evt_get {
-	struct i2o_evt_info info;
-	int pending;
-	int lost;
-};
-
-typedef struct i2o_sg_io_hdr {
-	unsigned int flags;	/* see I2O_DPT_SG_IO_FLAGS */
-} i2o_sg_io_hdr_t;
-
-/**************************************************************************
- * HRT related constants and structures
- **************************************************************************/
-#define I2O_BUS_LOCAL	0
-#define I2O_BUS_ISA	1
-#define I2O_BUS_EISA	2
-#define I2O_BUS_MCA	3
-#define I2O_BUS_PCI	4
-#define I2O_BUS_PCMCIA	5
-#define I2O_BUS_NUBUS	6
-#define I2O_BUS_CARDBUS 7
-#define I2O_BUS_UNKNOWN 0x80
-
-typedef struct _i2o_pci_bus {
-	__u8 PciFunctionNumber;
-	__u8 PciDeviceNumber;
-	__u8 PciBusNumber;
-	__u8 reserved;
-	__u16 PciVendorID;
-	__u16 PciDeviceID;
-} i2o_pci_bus;
-
-typedef struct _i2o_local_bus {
-	__u16 LbBaseIOPort;
-	__u16 reserved;
-	__u32 LbBaseMemoryAddress;
-} i2o_local_bus;
-
-typedef struct _i2o_isa_bus {
-	__u16 IsaBaseIOPort;
-	__u8 CSN;
-	__u8 reserved;
-	__u32 IsaBaseMemoryAddress;
-} i2o_isa_bus;
-
-typedef struct _i2o_eisa_bus_info {
-	__u16 EisaBaseIOPort;
-	__u8 reserved;
-	__u8 EisaSlotNumber;
-	__u32 EisaBaseMemoryAddress;
-} i2o_eisa_bus;
-
-typedef struct _i2o_mca_bus {
-	__u16 McaBaseIOPort;
-	__u8 reserved;
-	__u8 McaSlotNumber;
-	__u32 McaBaseMemoryAddress;
-} i2o_mca_bus;
-
-typedef struct _i2o_other_bus {
-	__u16 BaseIOPort;
-	__u16 reserved;
-	__u32 BaseMemoryAddress;
-} i2o_other_bus;
-
-typedef struct _i2o_hrt_entry {
-	__u32 adapter_id;
-	__u32 parent_tid:12;
-	__u32 state:4;
-	__u32 bus_num:8;
-	__u32 bus_type:8;
-	union {
-		i2o_pci_bus pci_bus;
-		i2o_local_bus local_bus;
-		i2o_isa_bus isa_bus;
-		i2o_eisa_bus eisa_bus;
-		i2o_mca_bus mca_bus;
-		i2o_other_bus other_bus;
-	} bus;
-} i2o_hrt_entry;
-
-typedef struct _i2o_hrt {
-	__u16 num_entries;
-	__u8 entry_len;
-	__u8 hrt_version;
-	__u32 change_ind;
-	i2o_hrt_entry hrt_entry[1];
-} i2o_hrt;
-
-typedef struct _i2o_lct_entry {
-	__u32 entry_size:16;
-	__u32 tid:12;
-	__u32 reserved:4;
-	__u32 change_ind;
-	__u32 device_flags;
-	__u32 class_id:12;
-	__u32 version:4;
-	__u32 vendor_id:16;
-	__u32 sub_class;
-	__u32 user_tid:12;
-	__u32 parent_tid:12;
-	__u32 bios_info:8;
-	__u8 identity_tag[8];
-	__u32 event_capabilities;
-} i2o_lct_entry;
-
-typedef struct _i2o_lct {
-	__u32 table_size:16;
-	__u32 boot_tid:12;
-	__u32 lct_ver:4;
-	__u32 iop_flags;
-	__u32 change_ind;
-	i2o_lct_entry lct_entry[1];
-} i2o_lct;
-
-typedef struct _i2o_status_block {
-	__u16 org_id;
-	__u16 reserved;
-	__u16 iop_id:12;
-	__u16 reserved1:4;
-	__u16 host_unit_id;
-	__u16 segment_number:12;
-	__u16 i2o_version:4;
-	__u8 iop_state;
-	__u8 msg_type;
-	__u16 inbound_frame_size;
-	__u8 init_code;
-	__u8 reserved2;
-	__u32 max_inbound_frames;
-	__u32 cur_inbound_frames;
-	__u32 max_outbound_frames;
-	char product_id[24];
-	__u32 expected_lct_size;
-	__u32 iop_capabilities;
-	__u32 desired_mem_size;
-	__u32 current_mem_size;
-	__u32 current_mem_base;
-	__u32 desired_io_size;
-	__u32 current_io_size;
-	__u32 current_io_base;
-	__u32 reserved3:24;
-	__u32 cmd_status:8;
-} i2o_status_block;
-
-/* Event indicator mask flags */
-#define I2O_EVT_IND_STATE_CHANGE		0x80000000
-#define I2O_EVT_IND_GENERAL_WARNING		0x40000000
-#define I2O_EVT_IND_CONFIGURATION_FLAG		0x20000000
-#define I2O_EVT_IND_LOCK_RELEASE		0x10000000
-#define I2O_EVT_IND_CAPABILITY_CHANGE		0x08000000
-#define I2O_EVT_IND_DEVICE_RESET		0x04000000
-#define I2O_EVT_IND_EVT_MASK_MODIFIED		0x02000000
-#define I2O_EVT_IND_FIELD_MODIFIED		0x01000000
-#define I2O_EVT_IND_VENDOR_EVT			0x00800000
-#define I2O_EVT_IND_DEVICE_STATE		0x00400000
-
-/* Executive event indicitors */
-#define I2O_EVT_IND_EXEC_RESOURCE_LIMITS	0x00000001
-#define I2O_EVT_IND_EXEC_CONNECTION_FAIL	0x00000002
-#define I2O_EVT_IND_EXEC_ADAPTER_FAULT		0x00000004
-#define I2O_EVT_IND_EXEC_POWER_FAIL		0x00000008
-#define I2O_EVT_IND_EXEC_RESET_PENDING		0x00000010
-#define I2O_EVT_IND_EXEC_RESET_IMMINENT 	0x00000020
-#define I2O_EVT_IND_EXEC_HW_FAIL		0x00000040
-#define I2O_EVT_IND_EXEC_XCT_CHANGE		0x00000080
-#define I2O_EVT_IND_EXEC_NEW_LCT_ENTRY		0x00000100
-#define I2O_EVT_IND_EXEC_MODIFIED_LCT		0x00000200
-#define I2O_EVT_IND_EXEC_DDM_AVAILABILITY	0x00000400
-
-/* Random Block Storage Event Indicators */
-#define I2O_EVT_IND_BSA_VOLUME_LOAD		0x00000001
-#define I2O_EVT_IND_BSA_VOLUME_UNLOAD		0x00000002
-#define I2O_EVT_IND_BSA_VOLUME_UNLOAD_REQ	0x00000004
-#define I2O_EVT_IND_BSA_CAPACITY_CHANGE 	0x00000008
-#define I2O_EVT_IND_BSA_SCSI_SMART		0x00000010
-
-/* Event data for generic events */
-#define I2O_EVT_STATE_CHANGE_NORMAL		0x00
-#define I2O_EVT_STATE_CHANGE_SUSPENDED		0x01
-#define I2O_EVT_STATE_CHANGE_RESTART		0x02
-#define I2O_EVT_STATE_CHANGE_NA_RECOVER 	0x03
-#define I2O_EVT_STATE_CHANGE_NA_NO_RECOVER	0x04
-#define I2O_EVT_STATE_CHANGE_QUIESCE_REQUEST	0x05
-#define I2O_EVT_STATE_CHANGE_FAILED		0x10
-#define I2O_EVT_STATE_CHANGE_FAULTED		0x11
-
-#define I2O_EVT_GEN_WARNING_NORMAL		0x00
-#define I2O_EVT_GEN_WARNING_ERROR_THRESHOLD	0x01
-#define I2O_EVT_GEN_WARNING_MEDIA_FAULT 	0x02
-
-#define I2O_EVT_CAPABILITY_OTHER		0x01
-#define I2O_EVT_CAPABILITY_CHANGED		0x02
-
-#define I2O_EVT_SENSOR_STATE_CHANGED		0x01
-
-/*
- *	I2O classes / subclasses
- */
-
-/*  Class ID and Code Assignments
- *  (LCT.ClassID.Version field)
- */
-#define I2O_CLASS_VERSION_10			0x00
-#define I2O_CLASS_VERSION_11			0x01
-
-/*  Class code names
- *  (from v1.5 Table 6-1 Class Code Assignments.)
- */
-
-#define I2O_CLASS_EXECUTIVE			0x000
-#define I2O_CLASS_DDM				0x001
-#define I2O_CLASS_RANDOM_BLOCK_STORAGE		0x010
-#define I2O_CLASS_SEQUENTIAL_STORAGE		0x011
-#define I2O_CLASS_LAN				0x020
-#define I2O_CLASS_WAN				0x030
-#define I2O_CLASS_FIBRE_CHANNEL_PORT		0x040
-#define I2O_CLASS_FIBRE_CHANNEL_PERIPHERAL	0x041
-#define I2O_CLASS_SCSI_PERIPHERAL		0x051
-#define I2O_CLASS_ATE_PORT			0x060
-#define I2O_CLASS_ATE_PERIPHERAL		0x061
-#define I2O_CLASS_FLOPPY_CONTROLLER		0x070
-#define I2O_CLASS_FLOPPY_DEVICE 		0x071
-#define I2O_CLASS_BUS_ADAPTER			0x080
-#define I2O_CLASS_PEER_TRANSPORT_AGENT		0x090
-#define I2O_CLASS_PEER_TRANSPORT		0x091
-#define	I2O_CLASS_END				0xfff
-
-/*
- *  Rest of 0x092 - 0x09f reserved for peer-to-peer classes
- */
-
-#define I2O_CLASS_MATCH_ANYCLASS		0xffffffff
-
-/*
- *  Subclasses
- */
-
-#define I2O_SUBCLASS_i960			0x001
-#define I2O_SUBCLASS_HDM			0x020
-#define I2O_SUBCLASS_ISM			0x021
-
-/* Operation functions */
-
-#define I2O_PARAMS_FIELD_GET			0x0001
-#define I2O_PARAMS_LIST_GET			0x0002
-#define I2O_PARAMS_MORE_GET			0x0003
-#define I2O_PARAMS_SIZE_GET			0x0004
-#define I2O_PARAMS_TABLE_GET			0x0005
-#define I2O_PARAMS_FIELD_SET			0x0006
-#define I2O_PARAMS_LIST_SET			0x0007
-#define I2O_PARAMS_ROW_ADD			0x0008
-#define I2O_PARAMS_ROW_DELETE			0x0009
-#define I2O_PARAMS_TABLE_CLEAR			0x000A
-
-/*
- * I2O serial number conventions / formats
- * (circa v1.5)
- */
-
-#define I2O_SNFORMAT_UNKNOWN			0
-#define I2O_SNFORMAT_BINARY			1
-#define I2O_SNFORMAT_ASCII			2
-#define I2O_SNFORMAT_UNICODE			3
-#define I2O_SNFORMAT_LAN48_MAC			4
-#define I2O_SNFORMAT_WAN			5
-
-/*
- * Plus new in v2.0 (Yellowstone pdf doc)
- */
-
-#define I2O_SNFORMAT_LAN64_MAC			6
-#define I2O_SNFORMAT_DDM			7
-#define I2O_SNFORMAT_IEEE_REG64 		8
-#define I2O_SNFORMAT_IEEE_REG128		9
-#define I2O_SNFORMAT_UNKNOWN2			0xff
-
-/*
- *	I2O Get Status State values
- */
-
-#define ADAPTER_STATE_INITIALIZING		0x01
-#define ADAPTER_STATE_RESET			0x02
-#define ADAPTER_STATE_HOLD			0x04
-#define ADAPTER_STATE_READY			0x05
-#define ADAPTER_STATE_OPERATIONAL		0x08
-#define ADAPTER_STATE_FAILED			0x10
-#define ADAPTER_STATE_FAULTED			0x11
-
-/*
- *	Software module types
- */
-#define I2O_SOFTWARE_MODULE_IRTOS		0x11
-#define I2O_SOFTWARE_MODULE_IOP_PRIVATE		0x22
-#define I2O_SOFTWARE_MODULE_IOP_CONFIG		0x23
-
-/*
- *	Vendors
- */
-#define I2O_VENDOR_DPT				0x001b
-
-/*
- * DPT / Adaptec specific values for i2o_sg_io_hdr flags.
- */
-#define I2O_DPT_SG_FLAG_INTERPRET		0x00010000
-#define I2O_DPT_SG_FLAG_PHYSICAL		0x00020000
-
-#define I2O_DPT_FLASH_FRAG_SIZE			0x10000
-#define I2O_DPT_FLASH_READ			0x0101
-#define I2O_DPT_FLASH_WRITE			0x0102
-
-#endif				/* _I2O_DEV_H */
diff --git a/ANDROID_3.4.5/include/linux/i2o.h b/ANDROID_3.4.5/include/linux/i2o.h
deleted file mode 100644
index d23c3c20..00000000
--- a/ANDROID_3.4.5/include/linux/i2o.h
+++ /dev/null
@@ -1,988 +0,0 @@
-/*
- * I2O kernel space accessible structures/APIs
- *
- * (c) Copyright 1999, 2000 Red Hat Software
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- *
- *************************************************************************
- *
- * This header file defined the I2O APIs/structures for use by
- * the I2O kernel modules.
- *
- */
-
-#ifndef _I2O_H
-#define _I2O_H
-
-#include <linux/i2o-dev.h>
-
-/* How many different OSM's are we allowing */
-#define I2O_MAX_DRIVERS		8
-
-#include <linux/pci.h>
-#include <linux/bug.h>
-#include <linux/dma-mapping.h>
-#include <linux/string.h>
-#include <linux/slab.h>
-#include <linux/workqueue.h>	/* work_struct */
-#include <linux/mempool.h>
-#include <linux/mutex.h>
-#include <linux/scatterlist.h>
-#include <linux/semaphore.h>	/* Needed for MUTEX init macros */
-
-#include <asm/io.h>
-
-/* message queue empty */
-#define I2O_QUEUE_EMPTY		0xffffffff
-
-/*
- *	Cache strategies
- */
-
-/*	The NULL strategy leaves everything up to the controller. This tends to be a
- *	pessimal but functional choice.
- */
-#define CACHE_NULL		0
-/*	Prefetch data when reading. We continually attempt to load the next 32 sectors
- *	into the controller cache.
- */
-#define CACHE_PREFETCH		1
-/*	Prefetch data when reading. We sometimes attempt to load the next 32 sectors
- *	into the controller cache. When an I/O is less <= 8K we assume its probably
- *	not sequential and don't prefetch (default)
- */
-#define CACHE_SMARTFETCH	2
-/*	Data is written to the cache and then out on to the disk. The I/O must be
- *	physically on the medium before the write is acknowledged (default without
- *	NVRAM)
- */
-#define CACHE_WRITETHROUGH	17
-/*	Data is written to the cache and then out on to the disk. The controller
- *	is permitted to write back the cache any way it wants. (default if battery
- *	backed NVRAM is present). It can be useful to set this for swap regardless of
- *	battery state.
- */
-#define CACHE_WRITEBACK		18
-/*	Optimise for under powered controllers, especially on RAID1 and RAID0. We
- *	write large I/O's directly to disk bypassing the cache to avoid the extra
- *	memory copy hits. Small writes are writeback cached
- */
-#define CACHE_SMARTBACK		19
-/*	Optimise for under powered controllers, especially on RAID1 and RAID0. We
- *	write large I/O's directly to disk bypassing the cache to avoid the extra
- *	memory copy hits. Small writes are writethrough cached. Suitable for devices
- *	lacking battery backup
- */
-#define CACHE_SMARTTHROUGH	20
-
-/*
- *	Ioctl structures
- */
-
-#define 	BLKI2OGRSTRAT	_IOR('2', 1, int)
-#define 	BLKI2OGWSTRAT	_IOR('2', 2, int)
-#define 	BLKI2OSRSTRAT	_IOW('2', 3, int)
-#define 	BLKI2OSWSTRAT	_IOW('2', 4, int)
-
-/*
- *	I2O Function codes
- */
-
-/*
- *	Executive Class
- */
-#define	I2O_CMD_ADAPTER_ASSIGN		0xB3
-#define	I2O_CMD_ADAPTER_READ		0xB2
-#define	I2O_CMD_ADAPTER_RELEASE		0xB5
-#define	I2O_CMD_BIOS_INFO_SET		0xA5
-#define	I2O_CMD_BOOT_DEVICE_SET		0xA7
-#define	I2O_CMD_CONFIG_VALIDATE		0xBB
-#define	I2O_CMD_CONN_SETUP		0xCA
-#define	I2O_CMD_DDM_DESTROY		0xB1
-#define	I2O_CMD_DDM_ENABLE		0xD5
-#define	I2O_CMD_DDM_QUIESCE		0xC7
-#define	I2O_CMD_DDM_RESET		0xD9
-#define	I2O_CMD_DDM_SUSPEND		0xAF
-#define	I2O_CMD_DEVICE_ASSIGN		0xB7
-#define	I2O_CMD_DEVICE_RELEASE		0xB9
-#define	I2O_CMD_HRT_GET			0xA8
-#define	I2O_CMD_ADAPTER_CLEAR		0xBE
-#define	I2O_CMD_ADAPTER_CONNECT		0xC9
-#define	I2O_CMD_ADAPTER_RESET		0xBD
-#define	I2O_CMD_LCT_NOTIFY		0xA2
-#define	I2O_CMD_OUTBOUND_INIT		0xA1
-#define	I2O_CMD_PATH_ENABLE		0xD3
-#define	I2O_CMD_PATH_QUIESCE		0xC5
-#define	I2O_CMD_PATH_RESET		0xD7
-#define	I2O_CMD_STATIC_MF_CREATE	0xDD
-#define	I2O_CMD_STATIC_MF_RELEASE	0xDF
-#define	I2O_CMD_STATUS_GET		0xA0
-#define	I2O_CMD_SW_DOWNLOAD		0xA9
-#define	I2O_CMD_SW_UPLOAD		0xAB
-#define	I2O_CMD_SW_REMOVE		0xAD
-#define	I2O_CMD_SYS_ENABLE		0xD1
-#define	I2O_CMD_SYS_MODIFY		0xC1
-#define	I2O_CMD_SYS_QUIESCE		0xC3
-#define	I2O_CMD_SYS_TAB_SET		0xA3
-
-/*
- * Utility Class
- */
-#define I2O_CMD_UTIL_NOP		0x00
-#define I2O_CMD_UTIL_ABORT		0x01
-#define I2O_CMD_UTIL_CLAIM		0x09
-#define I2O_CMD_UTIL_RELEASE		0x0B
-#define I2O_CMD_UTIL_PARAMS_GET		0x06
-#define I2O_CMD_UTIL_PARAMS_SET		0x05
-#define I2O_CMD_UTIL_EVT_REGISTER	0x13
-#define I2O_CMD_UTIL_EVT_ACK		0x14
-#define I2O_CMD_UTIL_CONFIG_DIALOG	0x10
-#define I2O_CMD_UTIL_DEVICE_RESERVE	0x0D
-#define I2O_CMD_UTIL_DEVICE_RELEASE	0x0F
-#define I2O_CMD_UTIL_LOCK		0x17
-#define I2O_CMD_UTIL_LOCK_RELEASE	0x19
-#define I2O_CMD_UTIL_REPLY_FAULT_NOTIFY	0x15
-
-/*
- * SCSI Host Bus Adapter Class
- */
-#define I2O_CMD_SCSI_EXEC		0x81
-#define I2O_CMD_SCSI_ABORT		0x83
-#define I2O_CMD_SCSI_BUSRESET		0x27
-
-/*
- * Bus Adapter Class
- */
-#define I2O_CMD_BUS_ADAPTER_RESET	0x85
-#define I2O_CMD_BUS_RESET		0x87
-#define I2O_CMD_BUS_SCAN		0x89
-#define I2O_CMD_BUS_QUIESCE		0x8b
-
-/*
- * Random Block Storage Class
- */
-#define I2O_CMD_BLOCK_READ		0x30
-#define I2O_CMD_BLOCK_WRITE		0x31
-#define I2O_CMD_BLOCK_CFLUSH		0x37
-#define I2O_CMD_BLOCK_MLOCK		0x49
-#define I2O_CMD_BLOCK_MUNLOCK		0x4B
-#define I2O_CMD_BLOCK_MMOUNT		0x41
-#define I2O_CMD_BLOCK_MEJECT		0x43
-#define I2O_CMD_BLOCK_POWER		0x70
-
-#define I2O_CMD_PRIVATE			0xFF
-
-/* Command status values  */
-
-#define I2O_CMD_IN_PROGRESS	0x01
-#define I2O_CMD_REJECTED	0x02
-#define I2O_CMD_FAILED		0x03
-#define I2O_CMD_COMPLETED	0x04
-
-/* I2O API function return values */
-
-#define I2O_RTN_NO_ERROR			0
-#define I2O_RTN_NOT_INIT			1
-#define I2O_RTN_FREE_Q_EMPTY			2
-#define I2O_RTN_TCB_ERROR			3
-#define I2O_RTN_TRANSACTION_ERROR		4
-#define I2O_RTN_ADAPTER_ALREADY_INIT		5
-#define I2O_RTN_MALLOC_ERROR			6
-#define I2O_RTN_ADPTR_NOT_REGISTERED		7
-#define I2O_RTN_MSG_REPLY_TIMEOUT		8
-#define I2O_RTN_NO_STATUS			9
-#define I2O_RTN_NO_FIRM_VER			10
-#define	I2O_RTN_NO_LINK_SPEED			11
-
-/* Reply message status defines for all messages */
-
-#define I2O_REPLY_STATUS_SUCCESS                    	0x00
-#define I2O_REPLY_STATUS_ABORT_DIRTY                	0x01
-#define I2O_REPLY_STATUS_ABORT_NO_DATA_TRANSFER     	0x02
-#define	I2O_REPLY_STATUS_ABORT_PARTIAL_TRANSFER		0x03
-#define	I2O_REPLY_STATUS_ERROR_DIRTY			0x04
-#define	I2O_REPLY_STATUS_ERROR_NO_DATA_TRANSFER		0x05
-#define	I2O_REPLY_STATUS_ERROR_PARTIAL_TRANSFER		0x06
-#define	I2O_REPLY_STATUS_PROCESS_ABORT_DIRTY		0x08
-#define	I2O_REPLY_STATUS_PROCESS_ABORT_NO_DATA_TRANSFER	0x09
-#define	I2O_REPLY_STATUS_PROCESS_ABORT_PARTIAL_TRANSFER	0x0A
-#define	I2O_REPLY_STATUS_TRANSACTION_ERROR		0x0B
-#define	I2O_REPLY_STATUS_PROGRESS_REPORT		0x80
-
-/* Status codes and Error Information for Parameter functions */
-
-#define I2O_PARAMS_STATUS_SUCCESS		0x00
-#define I2O_PARAMS_STATUS_BAD_KEY_ABORT		0x01
-#define I2O_PARAMS_STATUS_BAD_KEY_CONTINUE   	0x02
-#define I2O_PARAMS_STATUS_BUFFER_FULL		0x03
-#define I2O_PARAMS_STATUS_BUFFER_TOO_SMALL	0x04
-#define I2O_PARAMS_STATUS_FIELD_UNREADABLE	0x05
-#define I2O_PARAMS_STATUS_FIELD_UNWRITEABLE	0x06
-#define I2O_PARAMS_STATUS_INSUFFICIENT_FIELDS	0x07
-#define I2O_PARAMS_STATUS_INVALID_GROUP_ID	0x08
-#define I2O_PARAMS_STATUS_INVALID_OPERATION	0x09
-#define I2O_PARAMS_STATUS_NO_KEY_FIELD		0x0A
-#define I2O_PARAMS_STATUS_NO_SUCH_FIELD		0x0B
-#define I2O_PARAMS_STATUS_NON_DYNAMIC_GROUP	0x0C
-#define I2O_PARAMS_STATUS_OPERATION_ERROR	0x0D
-#define I2O_PARAMS_STATUS_SCALAR_ERROR		0x0E
-#define I2O_PARAMS_STATUS_TABLE_ERROR		0x0F
-#define I2O_PARAMS_STATUS_WRONG_GROUP_TYPE	0x10
-
-/* DetailedStatusCode defines for Executive, DDM, Util and Transaction error
- * messages: Table 3-2 Detailed Status Codes.*/
-
-#define I2O_DSC_SUCCESS                        0x0000
-#define I2O_DSC_BAD_KEY                        0x0002
-#define I2O_DSC_TCL_ERROR                      0x0003
-#define I2O_DSC_REPLY_BUFFER_FULL              0x0004
-#define I2O_DSC_NO_SUCH_PAGE                   0x0005
-#define I2O_DSC_INSUFFICIENT_RESOURCE_SOFT     0x0006
-#define I2O_DSC_INSUFFICIENT_RESOURCE_HARD     0x0007
-#define I2O_DSC_CHAIN_BUFFER_TOO_LARGE         0x0009
-#define I2O_DSC_UNSUPPORTED_FUNCTION           0x000A
-#define I2O_DSC_DEVICE_LOCKED                  0x000B
-#define I2O_DSC_DEVICE_RESET                   0x000C
-#define I2O_DSC_INAPPROPRIATE_FUNCTION         0x000D
-#define I2O_DSC_INVALID_INITIATOR_ADDRESS      0x000E
-#define I2O_DSC_INVALID_MESSAGE_FLAGS          0x000F
-#define I2O_DSC_INVALID_OFFSET                 0x0010
-#define I2O_DSC_INVALID_PARAMETER              0x0011
-#define I2O_DSC_INVALID_REQUEST                0x0012
-#define I2O_DSC_INVALID_TARGET_ADDRESS         0x0013
-#define I2O_DSC_MESSAGE_TOO_LARGE              0x0014
-#define I2O_DSC_MESSAGE_TOO_SMALL              0x0015
-#define I2O_DSC_MISSING_PARAMETER              0x0016
-#define I2O_DSC_TIMEOUT                        0x0017
-#define I2O_DSC_UNKNOWN_ERROR                  0x0018
-#define I2O_DSC_UNKNOWN_FUNCTION               0x0019
-#define I2O_DSC_UNSUPPORTED_VERSION            0x001A
-#define I2O_DSC_DEVICE_BUSY                    0x001B
-#define I2O_DSC_DEVICE_NOT_AVAILABLE           0x001C
-
-/* DetailedStatusCode defines for Block Storage Operation: Table 6-7 Detailed
-   Status Codes.*/
-
-#define I2O_BSA_DSC_SUCCESS               0x0000
-#define I2O_BSA_DSC_MEDIA_ERROR           0x0001
-#define I2O_BSA_DSC_ACCESS_ERROR          0x0002
-#define I2O_BSA_DSC_DEVICE_FAILURE        0x0003
-#define I2O_BSA_DSC_DEVICE_NOT_READY      0x0004
-#define I2O_BSA_DSC_MEDIA_NOT_PRESENT     0x0005
-#define I2O_BSA_DSC_MEDIA_LOCKED          0x0006
-#define I2O_BSA_DSC_MEDIA_FAILURE         0x0007
-#define I2O_BSA_DSC_PROTOCOL_FAILURE      0x0008
-#define I2O_BSA_DSC_BUS_FAILURE           0x0009
-#define I2O_BSA_DSC_ACCESS_VIOLATION      0x000A
-#define I2O_BSA_DSC_WRITE_PROTECTED       0x000B
-#define I2O_BSA_DSC_DEVICE_RESET          0x000C
-#define I2O_BSA_DSC_VOLUME_CHANGED        0x000D
-#define I2O_BSA_DSC_TIMEOUT               0x000E
-
-/* FailureStatusCodes, Table 3-3 Message Failure Codes */
-
-#define I2O_FSC_TRANSPORT_SERVICE_SUSPENDED             0x81
-#define I2O_FSC_TRANSPORT_SERVICE_TERMINATED            0x82
-#define I2O_FSC_TRANSPORT_CONGESTION                    0x83
-#define I2O_FSC_TRANSPORT_FAILURE                       0x84
-#define I2O_FSC_TRANSPORT_STATE_ERROR                   0x85
-#define I2O_FSC_TRANSPORT_TIME_OUT                      0x86
-#define I2O_FSC_TRANSPORT_ROUTING_FAILURE               0x87
-#define I2O_FSC_TRANSPORT_INVALID_VERSION               0x88
-#define I2O_FSC_TRANSPORT_INVALID_OFFSET                0x89
-#define I2O_FSC_TRANSPORT_INVALID_MSG_FLAGS             0x8A
-#define I2O_FSC_TRANSPORT_FRAME_TOO_SMALL               0x8B
-#define I2O_FSC_TRANSPORT_FRAME_TOO_LARGE               0x8C
-#define I2O_FSC_TRANSPORT_INVALID_TARGET_ID             0x8D
-#define I2O_FSC_TRANSPORT_INVALID_INITIATOR_ID          0x8E
-#define I2O_FSC_TRANSPORT_INVALID_INITIATOR_CONTEXT     0x8F
-#define I2O_FSC_TRANSPORT_UNKNOWN_FAILURE               0xFF
-
-/* Device Claim Types */
-#define	I2O_CLAIM_PRIMARY					0x01000000
-#define	I2O_CLAIM_MANAGEMENT					0x02000000
-#define	I2O_CLAIM_AUTHORIZED					0x03000000
-#define	I2O_CLAIM_SECONDARY					0x04000000
-
-/* Message header defines for VersionOffset */
-#define I2OVER15	0x0001
-#define I2OVER20	0x0002
-
-/* Default is 1.5 */
-#define I2OVERSION	I2OVER15
-
-#define SGL_OFFSET_0    I2OVERSION
-#define SGL_OFFSET_4    (0x0040 | I2OVERSION)
-#define SGL_OFFSET_5    (0x0050 | I2OVERSION)
-#define SGL_OFFSET_6    (0x0060 | I2OVERSION)
-#define SGL_OFFSET_7    (0x0070 | I2OVERSION)
-#define SGL_OFFSET_8    (0x0080 | I2OVERSION)
-#define SGL_OFFSET_9    (0x0090 | I2OVERSION)
-#define SGL_OFFSET_10   (0x00A0 | I2OVERSION)
-#define SGL_OFFSET_11   (0x00B0 | I2OVERSION)
-#define SGL_OFFSET_12   (0x00C0 | I2OVERSION)
-#define SGL_OFFSET(x)   (((x)<<4) | I2OVERSION)
-
-/* Transaction Reply Lists (TRL) Control Word structure */
-#define TRL_SINGLE_FIXED_LENGTH		0x00
-#define TRL_SINGLE_VARIABLE_LENGTH	0x40
-#define TRL_MULTIPLE_FIXED_LENGTH	0x80
-
- /* msg header defines for MsgFlags */
-#define MSG_STATIC	0x0100
-#define MSG_64BIT_CNTXT	0x0200
-#define MSG_MULTI_TRANS	0x1000
-#define MSG_FAIL	0x2000
-#define MSG_FINAL	0x4000
-#define MSG_REPLY	0x8000
-
- /* minimum size msg */
-#define THREE_WORD_MSG_SIZE	0x00030000
-#define FOUR_WORD_MSG_SIZE	0x00040000
-#define FIVE_WORD_MSG_SIZE	0x00050000
-#define SIX_WORD_MSG_SIZE	0x00060000
-#define SEVEN_WORD_MSG_SIZE	0x00070000
-#define EIGHT_WORD_MSG_SIZE	0x00080000
-#define NINE_WORD_MSG_SIZE	0x00090000
-#define TEN_WORD_MSG_SIZE	0x000A0000
-#define ELEVEN_WORD_MSG_SIZE	0x000B0000
-#define I2O_MESSAGE_SIZE(x)	((x)<<16)
-
-/* special TID assignments */
-#define ADAPTER_TID		0
-#define HOST_TID		1
-
-/* outbound queue defines */
-#define I2O_MAX_OUTBOUND_MSG_FRAMES	128
-#define I2O_OUTBOUND_MSG_FRAME_SIZE	128	/* in 32-bit words */
-
-/* inbound queue definitions */
-#define I2O_MSG_INPOOL_MIN		32
-#define I2O_INBOUND_MSG_FRAME_SIZE	128	/* in 32-bit words */
-
-#define I2O_POST_WAIT_OK	0
-#define I2O_POST_WAIT_TIMEOUT	-ETIMEDOUT
-
-#define I2O_CONTEXT_LIST_MIN_LENGTH	15
-#define I2O_CONTEXT_LIST_USED		0x01
-#define I2O_CONTEXT_LIST_DELETED	0x02
-
-/* timeouts */
-#define I2O_TIMEOUT_INIT_OUTBOUND_QUEUE	15
-#define I2O_TIMEOUT_MESSAGE_GET		5
-#define I2O_TIMEOUT_RESET		30
-#define I2O_TIMEOUT_STATUS_GET		5
-#define I2O_TIMEOUT_LCT_GET		360
-#define I2O_TIMEOUT_SCSI_SCB_ABORT	240
-
-/* retries */
-#define I2O_HRT_GET_TRIES		3
-#define I2O_LCT_GET_TRIES		3
-
-/* defines for max_sectors and max_phys_segments */
-#define I2O_MAX_SECTORS			1024
-#define I2O_MAX_SECTORS_LIMITED		128
-#define I2O_MAX_PHYS_SEGMENTS		BLK_MAX_SEGMENTS
-
-/*
- *	Message structures
- */
-struct i2o_message {
-	union {
-		struct {
-			u8 version_offset;
-			u8 flags;
-			u16 size;
-			u32 target_tid:12;
-			u32 init_tid:12;
-			u32 function:8;
-			u32 icntxt;	/* initiator context */
-			u32 tcntxt;	/* transaction context */
-		} s;
-		u32 head[4];
-	} u;
-	/* List follows */
-	u32 body[0];
-};
-
-/* MFA and I2O message used by mempool */
-struct i2o_msg_mfa {
-	u32 mfa;		/* MFA returned by the controller */
-	struct i2o_message msg;	/* I2O message */
-};
-
-/*
- *	Each I2O device entity has one of these. There is one per device.
- */
-struct i2o_device {
-	i2o_lct_entry lct_data;	/* Device LCT information */
-
-	struct i2o_controller *iop;	/* Controlling IOP */
-	struct list_head list;	/* node in IOP devices list */
-
-	struct device device;
-
-	struct mutex lock;	/* device lock */
-};
-
-/*
- *	Event structure provided to the event handling function
- */
-struct i2o_event {
-	struct work_struct work;
-	struct i2o_device *i2o_dev;	/* I2O device pointer from which the
-					   event reply was initiated */
-	u16 size;		/* Size of data in 32-bit words */
-	u32 tcntxt;		/* Transaction context used at
-				   registration */
-	u32 event_indicator;	/* Event indicator from reply */
-	u32 data[0];		/* Event data from reply */
-};
-
-/*
- *	I2O classes which could be handled by the OSM
- */
-struct i2o_class_id {
-	u16 class_id:12;
-};
-
-/*
- *	I2O driver structure for OSMs
- */
-struct i2o_driver {
-	char *name;		/* OSM name */
-	int context;		/* Low 8 bits of the transaction info */
-	struct i2o_class_id *classes;	/* I2O classes that this OSM handles */
-
-	/* Message reply handler */
-	int (*reply) (struct i2o_controller *, u32, struct i2o_message *);
-
-	/* Event handler */
-	work_func_t event;
-
-	struct workqueue_struct *event_queue;	/* Event queue */
-
-	struct device_driver driver;
-
-	/* notification of changes */
-	void (*notify_controller_add) (struct i2o_controller *);
-	void (*notify_controller_remove) (struct i2o_controller *);
-	void (*notify_device_add) (struct i2o_device *);
-	void (*notify_device_remove) (struct i2o_device *);
-
-	struct semaphore lock;
-};
-
-/*
- *	Contains DMA mapped address information
- */
-struct i2o_dma {
-	void *virt;
-	dma_addr_t phys;
-	size_t len;
-};
-
-/*
- *	Contains slab cache and mempool information
- */
-struct i2o_pool {
-	char *name;
-	struct kmem_cache *slab;
-	mempool_t *mempool;
-};
-
-/*
- *	Contains IO mapped address information
- */
-struct i2o_io {
-	void __iomem *virt;
-	unsigned long phys;
-	unsigned long len;
-};
-
-/*
- *	Context queue entry, used for 32-bit context on 64-bit systems
- */
-struct i2o_context_list_element {
-	struct list_head list;
-	u32 context;
-	void *ptr;
-	unsigned long timestamp;
-};
-
-/*
- * Each I2O controller has one of these objects
- */
-struct i2o_controller {
-	char name[16];
-	int unit;
-	int type;
-
-	struct pci_dev *pdev;	/* PCI device */
-
-	unsigned int promise:1;	/* Promise controller */
-	unsigned int adaptec:1;	/* DPT / Adaptec controller */
-	unsigned int raptor:1;	/* split bar */
-	unsigned int no_quiesce:1;	/* dont quiesce before reset */
-	unsigned int short_req:1;	/* use small block sizes */
-	unsigned int limit_sectors:1;	/* limit number of sectors / request */
-	unsigned int pae_support:1;	/* controller has 64-bit SGL support */
-
-	struct list_head devices;	/* list of I2O devices */
-	struct list_head list;	/* Controller list */
-
-	void __iomem *in_port;	/* Inbout port address */
-	void __iomem *out_port;	/* Outbound port address */
-	void __iomem *irq_status;	/* Interrupt status register address */
-	void __iomem *irq_mask;	/* Interrupt mask register address */
-
-	struct i2o_dma status;	/* IOP status block */
-
-	struct i2o_dma hrt;	/* HW Resource Table */
-	i2o_lct *lct;		/* Logical Config Table */
-	struct i2o_dma dlct;	/* Temp LCT */
-	struct mutex lct_lock;	/* Lock for LCT updates */
-	struct i2o_dma status_block;	/* IOP status block */
-
-	struct i2o_io base;	/* controller messaging unit */
-	struct i2o_io in_queue;	/* inbound message queue Host->IOP */
-	struct i2o_dma out_queue;	/* outbound message queue IOP->Host */
-
-	struct i2o_pool in_msg;	/* mempool for inbound messages */
-
-	unsigned int battery:1;	/* Has a battery backup */
-	unsigned int io_alloc:1;	/* An I/O resource was allocated */
-	unsigned int mem_alloc:1;	/* A memory resource was allocated */
-
-	struct resource io_resource;	/* I/O resource allocated to the IOP */
-	struct resource mem_resource;	/* Mem resource allocated to the IOP */
-
-	struct device device;
-	struct i2o_device *exec;	/* Executive */
-#if BITS_PER_LONG == 64
-	spinlock_t context_list_lock;	/* lock for context_list */
-	atomic_t context_list_counter;	/* needed for unique contexts */
-	struct list_head context_list;	/* list of context id's
-					   and pointers */
-#endif
-	spinlock_t lock;	/* lock for controller
-				   configuration */
-	void *driver_data[I2O_MAX_DRIVERS];	/* storage for drivers */
-};
-
-/*
- * I2O System table entry
- *
- * The system table contains information about all the IOPs in the
- * system.  It is sent to all IOPs so that they can create peer2peer
- * connections between them.
- */
-struct i2o_sys_tbl_entry {
-	u16 org_id;
-	u16 reserved1;
-	u32 iop_id:12;
-	u32 reserved2:20;
-	u16 seg_num:12;
-	u16 i2o_version:4;
-	u8 iop_state;
-	u8 msg_type;
-	u16 frame_size;
-	u16 reserved3;
-	u32 last_changed;
-	u32 iop_capabilities;
-	u32 inbound_low;
-	u32 inbound_high;
-};
-
-struct i2o_sys_tbl {
-	u8 num_entries;
-	u8 version;
-	u16 reserved1;
-	u32 change_ind;
-	u32 reserved2;
-	u32 reserved3;
-	struct i2o_sys_tbl_entry iops[0];
-};
-
-extern struct list_head i2o_controllers;
-
-/* Message functions */
-extern struct i2o_message *i2o_msg_get_wait(struct i2o_controller *, int);
-extern int i2o_msg_post_wait_mem(struct i2o_controller *, struct i2o_message *,
-				 unsigned long, struct i2o_dma *);
-
-/* IOP functions */
-extern int i2o_status_get(struct i2o_controller *);
-
-extern int i2o_event_register(struct i2o_device *, struct i2o_driver *, int,
-			      u32);
-extern struct i2o_device *i2o_iop_find_device(struct i2o_controller *, u16);
-extern struct i2o_controller *i2o_find_iop(int);
-
-/* Functions needed for handling 64-bit pointers in 32-bit context */
-#if BITS_PER_LONG == 64
-extern u32 i2o_cntxt_list_add(struct i2o_controller *, void *);
-extern void *i2o_cntxt_list_get(struct i2o_controller *, u32);
-extern u32 i2o_cntxt_list_remove(struct i2o_controller *, void *);
-extern u32 i2o_cntxt_list_get_ptr(struct i2o_controller *, void *);
-
-static inline u32 i2o_ptr_low(void *ptr)
-{
-	return (u32) (u64) ptr;
-};
-
-static inline u32 i2o_ptr_high(void *ptr)
-{
-	return (u32) ((u64) ptr >> 32);
-};
-
-static inline u32 i2o_dma_low(dma_addr_t dma_addr)
-{
-	return (u32) (u64) dma_addr;
-};
-
-static inline u32 i2o_dma_high(dma_addr_t dma_addr)
-{
-	return (u32) ((u64) dma_addr >> 32);
-};
-#else
-static inline u32 i2o_cntxt_list_add(struct i2o_controller *c, void *ptr)
-{
-	return (u32) ptr;
-};
-
-static inline void *i2o_cntxt_list_get(struct i2o_controller *c, u32 context)
-{
-	return (void *)context;
-};
-
-static inline u32 i2o_cntxt_list_remove(struct i2o_controller *c, void *ptr)
-{
-	return (u32) ptr;
-};
-
-static inline u32 i2o_cntxt_list_get_ptr(struct i2o_controller *c, void *ptr)
-{
-	return (u32) ptr;
-};
-
-static inline u32 i2o_ptr_low(void *ptr)
-{
-	return (u32) ptr;
-};
-
-static inline u32 i2o_ptr_high(void *ptr)
-{
-	return 0;
-};
-
-static inline u32 i2o_dma_low(dma_addr_t dma_addr)
-{
-	return (u32) dma_addr;
-};
-
-static inline u32 i2o_dma_high(dma_addr_t dma_addr)
-{
-	return 0;
-};
-#endif
-
-extern u16 i2o_sg_tablesize(struct i2o_controller *c, u16 body_size);
-extern dma_addr_t i2o_dma_map_single(struct i2o_controller *c, void *ptr,
-					    size_t size,
-					    enum dma_data_direction direction,
-					    u32 ** sg_ptr);
-extern int i2o_dma_map_sg(struct i2o_controller *c,
-				 struct scatterlist *sg, int sg_count,
-				 enum dma_data_direction direction,
-				 u32 ** sg_ptr);
-extern int i2o_dma_alloc(struct device *dev, struct i2o_dma *addr, size_t len);
-extern void i2o_dma_free(struct device *dev, struct i2o_dma *addr);
-extern int i2o_dma_realloc(struct device *dev, struct i2o_dma *addr,
-								size_t len);
-extern int i2o_pool_alloc(struct i2o_pool *pool, const char *name,
-				 size_t size, int min_nr);
-extern void i2o_pool_free(struct i2o_pool *pool);
-/* I2O driver (OSM) functions */
-extern int i2o_driver_register(struct i2o_driver *);
-extern void i2o_driver_unregister(struct i2o_driver *);
-
-/**
- *	i2o_driver_notify_controller_add - Send notification of added controller
- *	@drv: I2O driver
- *	@c: I2O controller
- *
- *	Send notification of added controller to a single registered driver.
- */
-static inline void i2o_driver_notify_controller_add(struct i2o_driver *drv,
-						    struct i2o_controller *c)
-{
-	if (drv->notify_controller_add)
-		drv->notify_controller_add(c);
-};
-
-/**
- *	i2o_driver_notify_controller_remove - Send notification of removed controller
- *	@drv: I2O driver
- *	@c: I2O controller
- *
- *	Send notification of removed controller to a single registered driver.
- */
-static inline void i2o_driver_notify_controller_remove(struct i2o_driver *drv,
-						       struct i2o_controller *c)
-{
-	if (drv->notify_controller_remove)
-		drv->notify_controller_remove(c);
-};
-
-/**
- *	i2o_driver_notify_device_add - Send notification of added device
- *	@drv: I2O driver
- *	@i2o_dev: the added i2o_device
- *
- *	Send notification of added device to a single registered driver.
- */
-static inline void i2o_driver_notify_device_add(struct i2o_driver *drv,
-						struct i2o_device *i2o_dev)
-{
-	if (drv->notify_device_add)
-		drv->notify_device_add(i2o_dev);
-};
-
-/**
- *	i2o_driver_notify_device_remove - Send notification of removed device
- *	@drv: I2O driver
- *	@i2o_dev: the added i2o_device
- *
- *	Send notification of removed device to a single registered driver.
- */
-static inline void i2o_driver_notify_device_remove(struct i2o_driver *drv,
-						   struct i2o_device *i2o_dev)
-{
-	if (drv->notify_device_remove)
-		drv->notify_device_remove(i2o_dev);
-};
-
-extern void i2o_driver_notify_controller_add_all(struct i2o_controller *);
-extern void i2o_driver_notify_controller_remove_all(struct i2o_controller *);
-extern void i2o_driver_notify_device_add_all(struct i2o_device *);
-extern void i2o_driver_notify_device_remove_all(struct i2o_device *);
-
-/* I2O device functions */
-extern int i2o_device_claim(struct i2o_device *);
-extern int i2o_device_claim_release(struct i2o_device *);
-
-/* Exec OSM functions */
-extern int i2o_exec_lct_get(struct i2o_controller *);
-
-/* device / driver / kobject conversion functions */
-#define to_i2o_driver(drv) container_of(drv,struct i2o_driver, driver)
-#define to_i2o_device(dev) container_of(dev, struct i2o_device, device)
-#define to_i2o_controller(dev) container_of(dev, struct i2o_controller, device)
-
-/**
- *	i2o_out_to_virt - Turn an I2O message to a virtual address
- *	@c: controller
- *	@m: message engine value
- *
- *	Turn a receive message from an I2O controller bus address into
- *	a Linux virtual address. The shared page frame is a linear block
- *	so we simply have to shift the offset. This function does not
- *	work for sender side messages as they are ioremap objects
- *	provided by the I2O controller.
- */
-static inline struct i2o_message *i2o_msg_out_to_virt(struct i2o_controller *c,
-						      u32 m)
-{
-	BUG_ON(m < c->out_queue.phys
-	       || m >= c->out_queue.phys + c->out_queue.len);
-
-	return c->out_queue.virt + (m - c->out_queue.phys);
-};
-
-/**
- *	i2o_msg_in_to_virt - Turn an I2O message to a virtual address
- *	@c: controller
- *	@m: message engine value
- *
- *	Turn a send message from an I2O controller bus address into
- *	a Linux virtual address. The shared page frame is a linear block
- *	so we simply have to shift the offset. This function does not
- *	work for receive side messages as they are kmalloc objects
- *	in a different pool.
- */
-static inline struct i2o_message __iomem *i2o_msg_in_to_virt(struct
-							     i2o_controller *c,
-							     u32 m)
-{
-	return c->in_queue.virt + m;
-};
-
-/**
- *	i2o_msg_get - obtain an I2O message from the IOP
- *	@c: I2O controller
- *
- *	This function tries to get a message frame. If no message frame is
- *	available do not wait until one is available (see also i2o_msg_get_wait).
- *	The returned pointer to the message frame is not in I/O memory, it is
- *	allocated from a mempool. But because a MFA is allocated from the
- *	controller too it is guaranteed that i2o_msg_post() will never fail.
- *
- *	On a success a pointer to the message frame is returned. If the message
- *	queue is empty -EBUSY is returned and if no memory is available -ENOMEM
- *	is returned.
- */
-static inline struct i2o_message *i2o_msg_get(struct i2o_controller *c)
-{
-	struct i2o_msg_mfa *mmsg = mempool_alloc(c->in_msg.mempool, GFP_ATOMIC);
-	if (!mmsg)
-		return ERR_PTR(-ENOMEM);
-
-	mmsg->mfa = readl(c->in_port);
-	if (unlikely(mmsg->mfa >= c->in_queue.len)) {
-		u32 mfa = mmsg->mfa;
-
-		mempool_free(mmsg, c->in_msg.mempool);
-
-		if (mfa == I2O_QUEUE_EMPTY)
-			return ERR_PTR(-EBUSY);
-		return ERR_PTR(-EFAULT);
-	}
-
-	return &mmsg->msg;
-};
-
-/**
- *	i2o_msg_post - Post I2O message to I2O controller
- *	@c: I2O controller to which the message should be send
- *	@msg: message returned by i2o_msg_get()
- *
- *	Post the message to the I2O controller and return immediately.
- */
-static inline void i2o_msg_post(struct i2o_controller *c,
-				struct i2o_message *msg)
-{
-	struct i2o_msg_mfa *mmsg;
-
-	mmsg = container_of(msg, struct i2o_msg_mfa, msg);
-	memcpy_toio(i2o_msg_in_to_virt(c, mmsg->mfa), msg,
-		    (le32_to_cpu(msg->u.head[0]) >> 16) << 2);
-	writel(mmsg->mfa, c->in_port);
-	mempool_free(mmsg, c->in_msg.mempool);
-};
-
-/**
- * 	i2o_msg_post_wait - Post and wait a message and wait until return
- *	@c: controller
- *	@msg: message to post
- *	@timeout: time in seconds to wait
- *
- * 	This API allows an OSM to post a message and then be told whether or
- *	not the system received a successful reply. If the message times out
- *	then the value '-ETIMEDOUT' is returned.
- *
- *	Returns 0 on success or negative error code on failure.
- */
-static inline int i2o_msg_post_wait(struct i2o_controller *c,
-				    struct i2o_message *msg,
-				    unsigned long timeout)
-{
-	return i2o_msg_post_wait_mem(c, msg, timeout, NULL);
-};
-
-/**
- *	i2o_msg_nop_mfa - Returns a fetched MFA back to the controller
- *	@c: I2O controller from which the MFA was fetched
- *	@mfa: MFA which should be returned
- *
- *	This function must be used for preserved messages, because i2o_msg_nop()
- *	also returns the allocated memory back to the msg_pool mempool.
- */
-static inline void i2o_msg_nop_mfa(struct i2o_controller *c, u32 mfa)
-{
-	struct i2o_message __iomem *msg;
-	u32 nop[3] = {
-		THREE_WORD_MSG_SIZE | SGL_OFFSET_0,
-		I2O_CMD_UTIL_NOP << 24 | HOST_TID << 12 | ADAPTER_TID,
-		0x00000000
-	};
-
-	msg = i2o_msg_in_to_virt(c, mfa);
-	memcpy_toio(msg, nop, sizeof(nop));
-	writel(mfa, c->in_port);
-};
-
-/**
- *	i2o_msg_nop - Returns a message which is not used
- *	@c: I2O controller from which the message was created
- *	@msg: message which should be returned
- *
- *	If you fetch a message via i2o_msg_get, and can't use it, you must
- *	return the message with this function. Otherwise the MFA is lost as well
- *	as the allocated memory from the mempool.
- */
-static inline void i2o_msg_nop(struct i2o_controller *c,
-			       struct i2o_message *msg)
-{
-	struct i2o_msg_mfa *mmsg;
-	mmsg = container_of(msg, struct i2o_msg_mfa, msg);
-
-	i2o_msg_nop_mfa(c, mmsg->mfa);
-	mempool_free(mmsg, c->in_msg.mempool);
-};
-
-/**
- *	i2o_flush_reply - Flush reply from I2O controller
- *	@c: I2O controller
- *	@m: the message identifier
- *
- *	The I2O controller must be informed that the reply message is not needed
- *	anymore. If you forget to flush the reply, the message frame can't be
- *	used by the controller anymore and is therefore lost.
- */
-static inline void i2o_flush_reply(struct i2o_controller *c, u32 m)
-{
-	writel(m, c->out_port);
-};
-
-/*
- *	Endian handling wrapped into the macro - keeps the core code
- *	cleaner.
- */
-
-#define i2o_raw_writel(val, mem)	__raw_writel(cpu_to_le32(val), mem)
-
-extern int i2o_parm_field_get(struct i2o_device *, int, int, void *, int);
-extern int i2o_parm_table_get(struct i2o_device *, int, int, int, void *, int,
-			      void *, int);
-
-/* debugging and troubleshooting/diagnostic helpers. */
-#define osm_printk(level, format, arg...)  \
-	printk(level "%s: " format, OSM_NAME , ## arg)
-
-#ifdef DEBUG
-#define osm_debug(format, arg...) \
-	osm_printk(KERN_DEBUG, format , ## arg)
-#else
-#define osm_debug(format, arg...) \
-        do { } while (0)
-#endif
-
-#define osm_err(format, arg...)		\
-	osm_printk(KERN_ERR, format , ## arg)
-#define osm_info(format, arg...)		\
-	osm_printk(KERN_INFO, format , ## arg)
-#define osm_warn(format, arg...)		\
-	osm_printk(KERN_WARNING, format , ## arg)
-
-/* debugging functions */
-extern void i2o_report_status(const char *, const char *, struct i2o_message *);
-extern void i2o_dump_message(struct i2o_message *);
-extern void i2o_dump_hrt(struct i2o_controller *c);
-extern void i2o_debug_state(struct i2o_controller *c);
-
-#endif				/* _I2O_H */
diff --git a/ANDROID_3.4.5/include/linux/i7300_idle.h b/ANDROID_3.4.5/include/linux/i7300_idle.h
deleted file mode 100644
index 1587b7de..00000000
--- a/ANDROID_3.4.5/include/linux/i7300_idle.h
+++ /dev/null
@@ -1,83 +0,0 @@
-
-#ifndef I7300_IDLE_H
-#define I7300_IDLE_H
-
-#include <linux/pci.h>
-
-/*
- * I/O AT controls (PCI bus 0 device 8 function 0)
- * DIMM controls (PCI bus 0 device 16 function 1)
- */
-#define IOAT_BUS 0
-#define IOAT_DEVFN PCI_DEVFN(8, 0)
-#define MEMCTL_BUS 0
-#define MEMCTL_DEVFN PCI_DEVFN(16, 1)
-
-struct fbd_ioat {
-	unsigned int vendor;
-	unsigned int ioat_dev;
-	unsigned int enabled;
-};
-
-/*
- * The i5000 chip-set has the same hooks as the i7300
- * but it is not enabled by default and must be manually
- * manually enabled with "forceload=1" because it is
- * only lightly validated.
- */
-
-static const struct fbd_ioat fbd_ioat_list[] = {
-	{PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_IOAT_CNB, 1},
-	{PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_IOAT, 0},
-	{0, 0}
-};
-
-/* table of devices that work with this driver */
-static const struct pci_device_id pci_tbl[] = {
-	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_FBD_CNB) },
-	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_5000_ERR) },
-	{ } /* Terminating entry */
-};
-
-/* Check for known platforms with I/O-AT */
-static inline int i7300_idle_platform_probe(struct pci_dev **fbd_dev,
-						struct pci_dev **ioat_dev,
-						int enable_all)
-{
-	int i;
-	struct pci_dev *memdev, *dmadev;
-
-	memdev = pci_get_bus_and_slot(MEMCTL_BUS, MEMCTL_DEVFN);
-	if (!memdev)
-		return -ENODEV;
-
-	for (i = 0; pci_tbl[i].vendor != 0; i++) {
-		if (memdev->vendor == pci_tbl[i].vendor &&
-		    memdev->device == pci_tbl[i].device) {
-			break;
-		}
-	}
-	if (pci_tbl[i].vendor == 0)
-		return -ENODEV;
-
-	dmadev = pci_get_bus_and_slot(IOAT_BUS, IOAT_DEVFN);
-	if (!dmadev)
-		return -ENODEV;
-
-	for (i = 0; fbd_ioat_list[i].vendor != 0; i++) {
-		if (dmadev->vendor == fbd_ioat_list[i].vendor &&
-		    dmadev->device == fbd_ioat_list[i].ioat_dev) {
-			if (!(fbd_ioat_list[i].enabled || enable_all))
-				continue;
-			if (fbd_dev)
-				*fbd_dev = memdev;
-			if (ioat_dev)
-				*ioat_dev = dmadev;
-
-			return 0;
-		}
-	}
-	return -ENODEV;
-}
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/i8042.h b/ANDROID_3.4.5/include/linux/i8042.h
deleted file mode 100644
index a986ff58..00000000
--- a/ANDROID_3.4.5/include/linux/i8042.h
+++ /dev/null
@@ -1,81 +0,0 @@
-#ifndef _LINUX_I8042_H
-#define _LINUX_I8042_H
-
-/*
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-
-#include <linux/types.h>
-
-/*
- * Standard commands.
- */
-
-#define I8042_CMD_CTL_RCTR	0x0120
-#define I8042_CMD_CTL_WCTR	0x1060
-#define I8042_CMD_CTL_TEST	0x01aa
-
-#define I8042_CMD_KBD_DISABLE	0x00ad
-#define I8042_CMD_KBD_ENABLE	0x00ae
-#define I8042_CMD_KBD_TEST	0x01ab
-#define I8042_CMD_KBD_LOOP	0x11d2
-
-#define I8042_CMD_AUX_DISABLE	0x00a7
-#define I8042_CMD_AUX_ENABLE	0x00a8
-#define I8042_CMD_AUX_TEST	0x01a9
-#define I8042_CMD_AUX_SEND	0x10d4
-#define I8042_CMD_AUX_LOOP	0x11d3
-
-#define I8042_CMD_MUX_PFX	0x0090
-#define I8042_CMD_MUX_SEND	0x1090
-
-struct serio;
-
-#if defined(CONFIG_SERIO_I8042) || defined(CONFIG_SERIO_I8042_MODULE)
-
-void i8042_lock_chip(void);
-void i8042_unlock_chip(void);
-int i8042_command(unsigned char *param, int command);
-bool i8042_check_port_owner(const struct serio *);
-int i8042_install_filter(bool (*filter)(unsigned char data, unsigned char str,
-					struct serio *serio));
-int i8042_remove_filter(bool (*filter)(unsigned char data, unsigned char str,
-				       struct serio *serio));
-
-#else
-
-static inline void i8042_lock_chip(void)
-{
-}
-
-static inline void i8042_unlock_chip(void)
-{
-}
-
-static inline int i8042_command(unsigned char *param, int command)
-{
-	return -ENODEV;
-}
-
-static inline bool i8042_check_port_owner(const struct serio *serio)
-{
-	return false;
-}
-
-static inline int i8042_install_filter(bool (*filter)(unsigned char data, unsigned char str,
-					struct serio *serio))
-{
-	return -ENODEV;
-}
-
-static inline int i8042_remove_filter(bool (*filter)(unsigned char data, unsigned char str,
-				       struct serio *serio))
-{
-	return -ENODEV;
-}
-
-#endif
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/i8253.h b/ANDROID_3.4.5/include/linux/i8253.h
deleted file mode 100644
index e6bb36a9..00000000
--- a/ANDROID_3.4.5/include/linux/i8253.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- *  Machine specific IO port address definition for generic.
- *  Written by Osamu Tomita <tomita@cinet.co.jp>
- */
-#ifndef __LINUX_I8253_H
-#define __LINUX_I8253_H
-
-#include <linux/param.h>
-#include <linux/spinlock.h>
-#include <linux/timex.h>
-
-/* i8253A PIT registers */
-#define PIT_MODE	0x43
-#define PIT_CH0		0x40
-#define PIT_CH2		0x42
-
-#define PIT_LATCH	((PIT_TICK_RATE + HZ/2) / HZ)
-
-extern raw_spinlock_t i8253_lock;
-extern struct clock_event_device i8253_clockevent;
-extern void clockevent_i8253_init(bool oneshot);
-
-extern void setup_pit_timer(void);
-
-#endif /* __LINUX_I8253_H */
diff --git a/ANDROID_3.4.5/include/linux/i82593.h b/ANDROID_3.4.5/include/linux/i82593.h
deleted file mode 100644
index afac5c7a..00000000
--- a/ANDROID_3.4.5/include/linux/i82593.h
+++ /dev/null
@@ -1,229 +0,0 @@
-/*
- * Definitions for Intel 82593 CSMA/CD Core LAN Controller
- * The definitions are taken from the 1992 users manual with Intel
- * order number 297125-001.
- *
- * /usr/src/pc/RCS/i82593.h,v 1.1 1996/07/17 15:23:12 root Exp
- *
- * Copyright 1994, Anders Klemets <klemets@it.kth.se>
- *
- * HISTORY
- * i82593.h,v
- * Revision 1.4  2005/11/4  09:15:00  baroniunas
- * Modified copyright with permission of author as follows:
- *
- *   "If I82539.H is the only file with my copyright statement
- *    that is included in the Source Forge project, then you have
- *    my approval to change the copyright statement to be a GPL
- *    license, in the way you proposed on October 10."
- *
- * Revision 1.1  1996/07/17 15:23:12  root
- * Initial revision
- *
- * Revision 1.3  1995/04/05  15:13:58  adj
- * Initial alpha release
- *
- * Revision 1.2  1994/06/16  23:57:31  klemets
- * Mirrored all the fields in the configuration block.
- *
- * Revision 1.1  1994/06/02  20:25:34  klemets
- * Initial revision
- *
- *
- */
-#ifndef	_I82593_H
-#define	_I82593_H
-
-/* Intel 82593 CSMA/CD Core LAN Controller */
-
-/* Port 0 Command Register definitions */
-
-/* Execution operations */
-#define OP0_NOP			0	/* CHNL = 0 */
-#define OP0_SWIT_TO_PORT_1	0	/* CHNL = 1 */
-#define OP0_IA_SETUP		1
-#define OP0_CONFIGURE		2
-#define OP0_MC_SETUP		3
-#define OP0_TRANSMIT		4
-#define OP0_TDR			5
-#define OP0_DUMP		6
-#define OP0_DIAGNOSE		7
-#define OP0_TRANSMIT_NO_CRC	9
-#define OP0_RETRANSMIT		12
-#define OP0_ABORT		13
-/* Reception operations */
-#define OP0_RCV_ENABLE		8
-#define OP0_RCV_DISABLE		10
-#define OP0_STOP_RCV		11
-/* Status pointer control operations */
-#define OP0_FIX_PTR		15	/* CHNL = 1 */
-#define OP0_RLS_PTR		15	/* CHNL = 0 */
-#define OP0_RESET		14
-
-#define CR0_CHNL		(1 << 4)	/* 0=Channel 0, 1=Channel 1 */
-#define CR0_STATUS_0		0x00
-#define CR0_STATUS_1		0x20
-#define CR0_STATUS_2		0x40
-#define CR0_STATUS_3		0x60
-#define CR0_INT_ACK		(1 << 7)	/* 0=No ack, 1=acknowledge */
-
-/* Port 0 Status Register definitions */
-
-#define SR0_NO_RESULT		0		/* dummy */
-#define SR0_EVENT_MASK		0x0f
-#define SR0_IA_SETUP_DONE	1
-#define SR0_CONFIGURE_DONE	2
-#define SR0_MC_SETUP_DONE	3
-#define SR0_TRANSMIT_DONE	4
-#define SR0_TDR_DONE		5
-#define SR0_DUMP_DONE		6
-#define SR0_DIAGNOSE_PASSED	7
-#define SR0_TRANSMIT_NO_CRC_DONE 9
-#define SR0_RETRANSMIT_DONE	12
-#define SR0_EXECUTION_ABORTED	13
-#define SR0_END_OF_FRAME	8
-#define SR0_RECEPTION_ABORTED	10
-#define SR0_DIAGNOSE_FAILED	15
-#define SR0_STOP_REG_HIT	11
-
-#define SR0_CHNL		(1 << 4)
-#define SR0_EXECUTION		(1 << 5)
-#define SR0_RECEPTION		(1 << 6)
-#define SR0_INTERRUPT		(1 << 7)
-#define SR0_BOTH_RX_TX		(SR0_EXECUTION | SR0_RECEPTION)
-
-#define SR3_EXEC_STATE_MASK	0x03
-#define SR3_EXEC_IDLE		0
-#define SR3_TX_ABORT_IN_PROGRESS 1
-#define SR3_EXEC_ACTIVE		2
-#define SR3_ABORT_IN_PROGRESS	3
-#define SR3_EXEC_CHNL		(1 << 2)
-#define SR3_STP_ON_NO_RSRC	(1 << 3)
-#define SR3_RCVING_NO_RSRC	(1 << 4)
-#define SR3_RCV_STATE_MASK	0x60
-#define SR3_RCV_IDLE		0x00
-#define SR3_RCV_READY		0x20
-#define SR3_RCV_ACTIVE		0x40
-#define SR3_RCV_STOP_IN_PROG	0x60
-#define SR3_RCV_CHNL		(1 << 7)
-
-/* Port 1 Command Register definitions */
-
-#define OP1_NOP			0
-#define OP1_SWIT_TO_PORT_0	1
-#define OP1_INT_DISABLE		2
-#define OP1_INT_ENABLE		3
-#define OP1_SET_TS		5
-#define OP1_RST_TS		7
-#define OP1_POWER_DOWN		8
-#define OP1_RESET_RING_MNGMT	11
-#define OP1_RESET		14
-#define OP1_SEL_RST		15
-
-#define CR1_STATUS_4		0x00
-#define CR1_STATUS_5		0x20
-#define CR1_STATUS_6		0x40
-#define CR1_STOP_REG_UPDATE	(1 << 7)
-
-/* Receive frame status bits */
-
-#define	RX_RCLD			(1 << 0)
-#define RX_IA_MATCH		(1 << 1)
-#define	RX_NO_AD_MATCH		(1 << 2)
-#define RX_NO_SFD		(1 << 3)
-#define RX_SRT_FRM		(1 << 7)
-#define RX_OVRRUN		(1 << 8)
-#define RX_ALG_ERR		(1 << 10)
-#define RX_CRC_ERR		(1 << 11)
-#define RX_LEN_ERR		(1 << 12)
-#define RX_RCV_OK		(1 << 13)
-#define RX_TYP_LEN		(1 << 15)
-
-/* Transmit status bits */
-
-#define TX_NCOL_MASK		0x0f
-#define TX_FRTL			(1 << 4)
-#define TX_MAX_COL		(1 << 5)
-#define TX_HRT_BEAT		(1 << 6)
-#define TX_DEFER		(1 << 7)
-#define TX_UND_RUN		(1 << 8)
-#define TX_LOST_CTS		(1 << 9)
-#define TX_LOST_CRS		(1 << 10)
-#define TX_LTCOL		(1 << 11)
-#define TX_OK			(1 << 13)
-#define TX_COLL			(1 << 15)
-
-struct i82593_conf_block {
-  u_char fifo_limit : 4,
-  	 forgnesi   : 1,
-  	 fifo_32    : 1,
-  	 d6mod      : 1,
-  	 throttle_enb : 1;
-  u_char throttle   : 6,
-	 cntrxint   : 1,
-	 contin	    : 1;
-  u_char addr_len   : 3,
-  	 acloc 	    : 1,
- 	 preamb_len : 2,
-  	 loopback   : 2;
-  u_char lin_prio   : 3,
-	 tbofstop   : 1,
-	 exp_prio   : 3,
-	 bof_met    : 1;
-  u_char	    : 4,
-	 ifrm_spc   : 4;
-  u_char	    : 5,
-	 slottim_low : 3;
-  u_char slottim_hi : 3,
-		    : 1,
-	 max_retr   : 4;
-  u_char prmisc     : 1,
-	 bc_dis     : 1,
-  		    : 1,
-	 crs_1	    : 1,
-	 nocrc_ins  : 1,
-	 crc_1632   : 1,
-  	 	    : 1,
-  	 crs_cdt    : 1;
-  u_char cs_filter  : 3,
-	 crs_src    : 1,
-	 cd_filter  : 3,
-		    : 1;
-  u_char	    : 2,
-  	 min_fr_len : 6;
-  u_char lng_typ    : 1,
-	 lng_fld    : 1,
-	 rxcrc_xf   : 1,
-	 artx	    : 1,
-	 sarec	    : 1,
-	 tx_jabber  : 1,	/* why is this called max_len in the manual? */
-	 hash_1	    : 1,
-  	 lbpkpol    : 1;
-  u_char	    : 6,
-  	 fdx	    : 1,
-  	  	    : 1;
-  u_char dummy_6    : 6,	/* supposed to be ones */
-  	 mult_ia    : 1,
-  	 dis_bof    : 1;
-  u_char dummy_1    : 1,	/* supposed to be one */
-	 tx_ifs_retrig : 2,
-	 mc_all     : 1,
-	 rcv_mon    : 2,
-	 frag_acpt  : 1,
-  	 tstrttrs   : 1;
-  u_char fretx	    : 1,
-	 runt_eop   : 1,
-	 hw_sw_pin  : 1,
-	 big_endn   : 1,
-	 syncrqs    : 1,
-	 sttlen     : 1,
-	 tx_eop     : 1,
-  	 rx_eop	    : 1;
-  u_char rbuf_size  : 5,
-	 rcvstop    : 1,
-  	 	    : 2;
-};
-
-#define I82593_MAX_MULTICAST_ADDRESSES	128	/* Hardware hashed filter */
-
-#endif /* _I82593_H */
diff --git a/ANDROID_3.4.5/include/linux/i8k.h b/ANDROID_3.4.5/include/linux/i8k.h
deleted file mode 100644
index 1c45ba50..00000000
--- a/ANDROID_3.4.5/include/linux/i8k.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- * i8k.h -- Linux driver for accessing the SMM BIOS on Dell laptops
- *
- * Copyright (C) 2001  Massimo Dal Zotto <dz@debian.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2, or (at your option) any
- * later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- */
-
-#ifndef _LINUX_I8K_H
-#define _LINUX_I8K_H
-
-#define I8K_PROC		"/proc/i8k"
-#define I8K_PROC_FMT		"1.0"
-
-#define I8K_BIOS_VERSION	_IOR ('i', 0x80, int)	/* broken: meant 4 bytes */
-#define I8K_MACHINE_ID		_IOR ('i', 0x81, int)	/* broken: meant 16 bytes */
-#define I8K_POWER_STATUS	_IOR ('i', 0x82, size_t)
-#define I8K_FN_STATUS		_IOR ('i', 0x83, size_t)
-#define I8K_GET_TEMP		_IOR ('i', 0x84, size_t)
-#define I8K_GET_SPEED		_IOWR('i', 0x85, size_t)
-#define I8K_GET_FAN		_IOWR('i', 0x86, size_t)
-#define I8K_SET_FAN		_IOWR('i', 0x87, size_t)
-
-#define I8K_FAN_LEFT		1
-#define I8K_FAN_RIGHT		0
-#define I8K_FAN_OFF		0
-#define I8K_FAN_LOW		1
-#define I8K_FAN_HIGH		2
-#define I8K_FAN_MAX		I8K_FAN_HIGH
-
-#define I8K_VOL_UP		1
-#define I8K_VOL_DOWN		2
-#define I8K_VOL_MUTE		4
-
-#define I8K_AC			1
-#define I8K_BATTERY		0
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/ibmtr.h b/ANDROID_3.4.5/include/linux/ibmtr.h
deleted file mode 100644
index 06695b74..00000000
--- a/ANDROID_3.4.5/include/linux/ibmtr.h
+++ /dev/null
@@ -1,373 +0,0 @@
-#ifndef __LINUX_IBMTR_H__
-#define __LINUX_IBMTR_H__
-
-/* Definitions for an IBM Token Ring card. */
-/* This file is distributed under the GNU GPL   */
-
-/* ported to the Alpha architecture 02/20/96 (just used the HZ macro) */
-
-#define TR_RETRY_INTERVAL	(30*HZ)	/* 500 on PC = 5 s */
-#define TR_RST_TIME		(msecs_to_jiffies(50))	/* 5 on PC = 50 ms */
-#define TR_BUSY_INTERVAL	(msecs_to_jiffies(200))	/* 5 on PC = 200 ms */
-#define TR_SPIN_INTERVAL	(3*HZ)	/* 3 seconds before init timeout */
-
-#define TR_ISA 1
-#define TR_MCA 2
-#define TR_ISAPNP 3
-#define NOTOK 0
-
-#define IBMTR_SHARED_RAM_SIZE 0x10000
-#define IBMTR_IO_EXTENT 4
-#define IBMTR_MAX_ADAPTERS 4
-
-#define CHANNEL_ID      0X1F30
-#define AIP             0X1F00
-#define AIPADAPTYPE     0X1FA0
-#define AIPDATARATE     0X1FA2
-#define AIPEARLYTOKEN   0X1FA4
-#define AIPAVAILSHRAM   0X1FA6
-#define AIPSHRAMPAGE    0X1FA8
-#define AIP4MBDHB       0X1FAA
-#define AIP16MBDHB      0X1FAC
-#define AIPFID		0X1FBA
-
-#define ADAPTRESET      0x1     /* Control Adapter reset (add to base) */
-#define ADAPTRESETREL   0x2     /* Release Adapter from reset ( """)  */
-#define ADAPTINTREL	0x3 	/* Adapter interrupt release */
-
-#define GLOBAL_INT_ENABLE 0x02f0
-
-/* MMIO bits 0-4 select register */
-#define RRR_EVEN       0x00 /* Shared RAM relocation registers - even and odd */
-/* Used to set the starting address of shared RAM  */
-/* Bits 1 through 7 of this register map to bits 13 through 19 of the shared
-   RAM address.*/
-/* ie: 0x02 sets RAM address to ...ato!  issy su wazzoo !! GODZILLA!!! */
-#define RRR_ODD         0x01
-/* Bits 2 and 3 of this register can be read to determine shared RAM size */
-/* 00 for 8k, 01 for 16k, 10 for 32k, 11 for 64k  */
-#define WRBR_EVEN       0x02    /* Write region base registers - even and odd */
-#define WRBR_ODD        0x03
-#define WWOR_EVEN       0x04    /* Write window open registers - even and odd */
-#define WWOR_ODD        0x05
-#define WWCR_EVEN       0x06   /* Write window close registers - even and odd */
-#define WWCR_ODD        0x07
-
-/* Interrupt status registers - PC system  - even and odd */
-#define ISRP_EVEN       0x08
-
-#define TCR_INT    0x10    /* Bit 4 - Timer interrupt.  The TVR_EVEN timer has
-                                                                   expired. */
-#define ERR_INT	   0x08    /* Bit 3 - Error interrupt.  The adapter has had an
-                                                            internal error. */
-#define ACCESS_INT 0x04    /* Bit 2 - Access interrupt.  You have attempted to
-				      write to an invalid area of shared RAM
-				      or an invalid register within the MMIO. */
-/* In addition, the following bits within ISRP_EVEN can be turned on or off   */
-/* by you to control the interrupt processing:   */
-#define INT_ENABLE 0x40 /* Bit 6 - Interrupt enable.  If 0, no interrupts will
-                                   occur.  If 1, interrupts will occur normally.
-                                                         Normally set to 1.  */
-/* Bit 0 - Primary or alternate adapter.  Set to zero if this adapter is the
-		primary adapter, 1 if this adapter is the alternate adapter. */
-
-
-#define ISRP_ODD        0x09
-
-#define ADAP_CHK_INT 0x40 /* Bit 6 - Adapter check.  the adapter has
-                             encountered a serious problem and has closed
-                             itself.  Whoa.  */
-#define SRB_RESP_INT 0x20 /* Bit 5 - SRB response.  The adapter has accepted
-                             an SRB request and set the return code within
-                             the SRB. */
-#define ASB_FREE_INT 0x10 /* Bit 4 - ASB free.  The adapter has read the ASB
-                             and this area can be safely reused. This interrupt
-                             is only used if your application has set the ASB
-                             free request bit in ISRA_ODD or if an error was
-                             detected in your response. */
-#define ARB_CMD_INT  0x08 /* Bit 3 - ARB command.  The adapter has given you a
-                             command for action.  The command is located in the
-                             ARB area of shared memory. */
-#define SSB_RESP_INT 0x04 /* Bit 2 - SSB response.  The adapter has posted a
-                             response to your SRB (the response is located in
-                             the SSB area of shared memory). */
-/* Bit 1 - Bridge frame forward complete. */
-
-
-
-#define ISRA_EVEN 0x0A /*Interrupt status registers - adapter  - even and odd */
-/* Bit 7 - Internal parity error (on adapter's internal bus) */
-/* Bit 6 - Timer interrupt pending */
-/* Bit 5 - Access interrupt (attempt by adapter to access illegal address) */
-/* Bit 4 - Adapter microcode problem (microcode dead-man timer expired) */
-/* Bit 3 - Adapter processor check status */
-/* Bit 2 - Reserved */
-/* Bit 1 - Adapter hardware interrupt mask (prevents internal interrupts) */
-/* Bit 0 - Adapter software interrupt mask (prevents internal software ints) */
-
-#define ISRA_ODD        0x0B
-#define CMD_IN_SRB  0x20 /* Bit 5  - Indicates that you have placed a new
-                           command in the SRB and are ready for the adapter to
-                           process the command. */
-#define RESP_IN_ASB 0x10 /* Bit 4 - Indicates that you have placed a response
-                            (an ASB) in the shared RAM which is available for
-                            the adapter's use. */
-/* Bit 3 - Indicates that you are ready to put an SRB in the shared RAM, but
-	that a previous command is still pending.  The adapter will then
-	interrupt you when the previous command is completed */
-/* Bit 2 - Indicates that you are ready to put an ASB in the shared RAM, but
-	that a previous ASB is still pending.  The adapter will then interrupt
-	you when the previous ASB is copied.  */
-#define ARB_FREE 0x2
-#define SSB_FREE 0x1
-
-#define TCR_EVEN        0x0C    /* Timer control registers - even and odd */
-#define TCR_ODD         0x0D
-#define TVR_EVEN        0x0E    /* Timer value registers - even and odd */
-#define TVR_ODD         0x0F
-#define SRPR_EVEN       0x18    /* Shared RAM paging registers - even and odd */
-#define SRPR_ENABLE_PAGING 0xc0
-#define SRPR_ODD        0x19	/* Not used. */
-#define TOKREAD         0x60
-#define TOKOR           0x40
-#define TOKAND          0x20
-#define TOKWRITE        0x00
-
-/* MMIO bits 5-6 select operation */
-/* 00 is used to write to a register */
-/* 01 is used to bitwise AND a byte with a register */
-/* 10 is used to bitwise OR a byte with a register  */
-/* 11 is used to read from a register */
-
-/* MMIO bits 7-8 select area of interest.. see below */
-/* 00 selects attachment control area. */
-/* 01 is reserved. */
-/* 10 selects adapter identification area A containing the adapter encoded
-	address. */
-/* 11 selects the adapter identification area B containing test patterns. */
-
-#define PCCHANNELID 5049434F3631313039393020
-#define MCCHANNELID 4D4152533633583435313820
-
-#define ACA_OFFSET 0x1e00
-#define ACA_SET 0x40
-#define ACA_RESET 0x20
-#define ACA_RW 0x00
-
-#ifdef ENABLE_PAGING
-#define SET_PAGE(x) (writeb((x), ti->mmio + ACA_OFFSET+ ACA_RW + SRPR_EVEN))
-#else
-#define SET_PAGE(x)
-#endif
-
-/* do_tok_int possible values */
-#define FIRST_INT 1
-#define NOT_FIRST 2
-
-typedef enum {	CLOSED,	OPEN } open_state;
-//staic const char *printstate[] = { "CLOSED","OPEN"};
-
-struct tok_info {
-	unsigned char irq;
-	void __iomem *mmio;
-	unsigned char hw_address[32];
-	unsigned char adapter_type;
-	unsigned char data_rate;
-	unsigned char token_release;
-	unsigned char avail_shared_ram;
-	unsigned char shared_ram_paging;
-        unsigned char turbo;
-	unsigned short dhb_size4mb;
-	unsigned short rbuf_len4;
-	unsigned short rbuf_cnt4;
-	unsigned short maxmtu4;
-	unsigned short dhb_size16mb;
-	unsigned short rbuf_len16;
-	unsigned short rbuf_cnt16;
-	unsigned short maxmtu16;
-	/* Additions by David Morris       */
-	unsigned char do_tok_int;
-	wait_queue_head_t wait_for_reset;
-	unsigned char sram_base;
-	/* Additions by Peter De Schrijver */
-	unsigned char page_mask;          /* mask to select RAM page to Map*/
-	unsigned char mapped_ram_size;    /* size of RAM page */
-	__u32 sram_phys;          /* Shared memory base address */
-	void __iomem *sram_virt;          /* Shared memory base address */
-	void __iomem *init_srb;   /* Initial System Request Block address */
-	void __iomem *srb;                /* System Request Block address */
-	void __iomem *ssb;                /* System Status Block address */
-	void __iomem *arb;                /* Adapter Request Block address */
-	void __iomem *asb;                /* Adapter Status Block address */
-        __u8  init_srb_page;
-        __u8  srb_page;
-        __u8  ssb_page;
-        __u8  arb_page;
-        __u8  asb_page;
-	unsigned short exsap_station_id;
-	unsigned short global_int_enable;
-	struct sk_buff *current_skb;
-
-	unsigned char auto_speedsave;
-	open_state			open_status, sap_status;
-	enum {MANUAL, AUTOMATIC}	open_mode;
-	enum {FAIL, RESTART, REOPEN}	open_action;
-	enum {NO, YES}			open_failure;
-	unsigned char readlog_pending;
-	unsigned short adapter_int_enable; /* Adapter-specific int enable */
-        struct timer_list tr_timer;
-	unsigned char ring_speed;
-	spinlock_t lock;		/* SMP protection */
-};
-
-/* token ring adapter commands */
-#define DIR_INTERRUPT 		0x00 /* struct srb_interrupt */
-#define DIR_MOD_OPEN_PARAMS 	0x01
-#define DIR_OPEN_ADAPTER 	0x03 /* struct dir_open_adapter */
-#define DIR_CLOSE_ADAPTER   	0x04
-#define DIR_SET_GRP_ADDR    	0x06
-#define DIR_SET_FUNC_ADDR   	0x07 /* struct srb_set_funct_addr */
-#define DIR_READ_LOG 		0x08 /* struct srb_read_log */
-#define DLC_OPEN_SAP 		0x15 /* struct dlc_open_sap */
-#define DLC_CLOSE_SAP       	0x16
-#define DATA_LOST 		0x20 /* struct asb_rec */
-#define REC_DATA 		0x81 /* struct arb_rec_req */
-#define XMIT_DATA_REQ 		0x82 /* struct arb_xmit_req */
-#define DLC_STATUS 		0x83 /* struct arb_dlc_status */
-#define RING_STAT_CHANGE    	0x84 /* struct dlc_open_sap ??? */
-
-/* DIR_OPEN_ADAPTER options */
-#define OPEN_PASS_BCON_MAC 0x0100
-#define NUM_RCV_BUF 2
-#define RCV_BUF_LEN 1024
-#define DHB_LENGTH 2048
-#define NUM_DHB 2
-#define DLC_MAX_SAP 2
-#define DLC_MAX_STA 1
-
-/* DLC_OPEN_SAP options */
-#define MAX_I_FIELD 0x0088
-#define SAP_OPEN_IND_SAP 0x04
-#define SAP_OPEN_PRIORITY 0x20
-#define SAP_OPEN_STATION_CNT 0x1
-#define XMIT_DIR_FRAME 0x0A
-#define XMIT_UI_FRAME  0x0d
-#define XMIT_XID_CMD   0x0e
-#define XMIT_TEST_CMD  0x11
-
-/* srb close return code */
-#define SIGNAL_LOSS  0x8000
-#define HARD_ERROR   0x4000
-#define XMIT_BEACON  0x1000
-#define LOBE_FAULT   0x0800
-#define AUTO_REMOVAL 0x0400
-#define REMOVE_RECV  0x0100
-#define LOG_OVERFLOW 0x0080
-#define RING_RECOVER 0x0020
-
-struct srb_init_response {
-	unsigned char command;
-	unsigned char init_status;
-	unsigned char init_status_2;
-	unsigned char reserved[3];
-	__u16 bring_up_code;
-	__u16 encoded_address;
-	__u16 level_address;
-	__u16 adapter_address;
-	__u16 parms_address;
-	__u16 mac_address;
-};
-
-struct dir_open_adapter {
-	unsigned char command;
-	char reserved[7];
-	__u16 open_options;
-	unsigned char node_address[6];
-	unsigned char group_address[4];
-	unsigned char funct_address[4];
-	__u16 num_rcv_buf;
-	__u16 rcv_buf_len;
-	__u16 dhb_length;
-	unsigned char num_dhb;
-	char reserved2;
-	unsigned char dlc_max_sap;
-	unsigned char dlc_max_sta;
-	unsigned char dlc_max_gsap;
-	unsigned char dlc_max_gmem;
-	unsigned char dlc_t1_tick_1;
-	unsigned char dlc_t2_tick_1;
-	unsigned char dlc_ti_tick_1;
-	unsigned char dlc_t1_tick_2;
-	unsigned char dlc_t2_tick_2;
-	unsigned char dlc_ti_tick_2;
-	unsigned char product_id[18];
-};
-
-struct dlc_open_sap {
-	unsigned char command;
-	unsigned char reserved1;
-	unsigned char ret_code;
-	unsigned char reserved2;
-	__u16 station_id;
-	unsigned char timer_t1;
-	unsigned char timer_t2;
-	unsigned char timer_ti;
-	unsigned char maxout;
-	unsigned char maxin;
-	unsigned char maxout_incr;
-	unsigned char max_retry_count;
-	unsigned char gsap_max_mem;
-	__u16 max_i_field;
-	unsigned char sap_value;
-	unsigned char sap_options;
-	unsigned char station_count;
-	unsigned char sap_gsap_mem;
-	unsigned char gsap[0];
-};
-
-struct srb_xmit {
-	unsigned char command;
-	unsigned char cmd_corr;
-	unsigned char ret_code;
-	unsigned char reserved1;
-	__u16 station_id;
-};
-
-struct arb_rec_req {
-	unsigned char command;
-	unsigned char reserved1[3];
-	__u16 station_id;
-	__u16 rec_buf_addr;
-	unsigned char lan_hdr_len;
-	unsigned char dlc_hdr_len;
-	__u16 frame_len;
-	unsigned char msg_type;
-};
-
-struct asb_rec {
-	unsigned char command;
-	unsigned char reserved1;
-	unsigned char ret_code;
-	unsigned char reserved2;
-	__u16 station_id;
-	__u16 rec_buf_addr;
-};
-
-struct rec_buf {
-  	unsigned char reserved1[2];
-	__u16 buf_ptr;
-	unsigned char reserved2;
-	unsigned char receive_fs;
-	__u16 buf_len;
-	unsigned char data[0];
-};
-
-struct srb_set_funct_addr {
-	unsigned char command;
-	unsigned char reserved1;
-	unsigned char ret_code;
-	unsigned char reserved2[3];
-	unsigned char funct_address[4];
-};
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/icmp.h b/ANDROID_3.4.5/include/linux/icmp.h
deleted file mode 100644
index 474f2a51..00000000
--- a/ANDROID_3.4.5/include/linux/icmp.h
+++ /dev/null
@@ -1,105 +0,0 @@
-/*
- * INET		An implementation of the TCP/IP protocol suite for the LINUX
- *		operating system.  INET is implemented using the  BSD Socket
- *		interface as the means of communication with the user level.
- *
- *		Definitions for the ICMP protocol.
- *
- * Version:	@(#)icmp.h	1.0.3	04/28/93
- *
- * Author:	Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
- *
- *		This program is free software; you can redistribute it and/or
- *		modify it under the terms of the GNU General Public License
- *		as published by the Free Software Foundation; either version
- *		2 of the License, or (at your option) any later version.
- */
-#ifndef _LINUX_ICMP_H
-#define	_LINUX_ICMP_H
-
-#include <linux/types.h>
-
-#define ICMP_ECHOREPLY		0	/* Echo Reply			*/
-#define ICMP_DEST_UNREACH	3	/* Destination Unreachable	*/
-#define ICMP_SOURCE_QUENCH	4	/* Source Quench		*/
-#define ICMP_REDIRECT		5	/* Redirect (change route)	*/
-#define ICMP_ECHO		8	/* Echo Request			*/
-#define ICMP_TIME_EXCEEDED	11	/* Time Exceeded		*/
-#define ICMP_PARAMETERPROB	12	/* Parameter Problem		*/
-#define ICMP_TIMESTAMP		13	/* Timestamp Request		*/
-#define ICMP_TIMESTAMPREPLY	14	/* Timestamp Reply		*/
-#define ICMP_INFO_REQUEST	15	/* Information Request		*/
-#define ICMP_INFO_REPLY		16	/* Information Reply		*/
-#define ICMP_ADDRESS		17	/* Address Mask Request		*/
-#define ICMP_ADDRESSREPLY	18	/* Address Mask Reply		*/
-#define NR_ICMP_TYPES		18
-
-
-/* Codes for UNREACH. */
-#define ICMP_NET_UNREACH	0	/* Network Unreachable		*/
-#define ICMP_HOST_UNREACH	1	/* Host Unreachable		*/
-#define ICMP_PROT_UNREACH	2	/* Protocol Unreachable		*/
-#define ICMP_PORT_UNREACH	3	/* Port Unreachable		*/
-#define ICMP_FRAG_NEEDED	4	/* Fragmentation Needed/DF set	*/
-#define ICMP_SR_FAILED		5	/* Source Route failed		*/
-#define ICMP_NET_UNKNOWN	6
-#define ICMP_HOST_UNKNOWN	7
-#define ICMP_HOST_ISOLATED	8
-#define ICMP_NET_ANO		9
-#define ICMP_HOST_ANO		10
-#define ICMP_NET_UNR_TOS	11
-#define ICMP_HOST_UNR_TOS	12
-#define ICMP_PKT_FILTERED	13	/* Packet filtered */
-#define ICMP_PREC_VIOLATION	14	/* Precedence violation */
-#define ICMP_PREC_CUTOFF	15	/* Precedence cut off */
-#define NR_ICMP_UNREACH		15	/* instead of hardcoding immediate value */
-
-/* Codes for REDIRECT. */
-#define ICMP_REDIR_NET		0	/* Redirect Net			*/
-#define ICMP_REDIR_HOST		1	/* Redirect Host		*/
-#define ICMP_REDIR_NETTOS	2	/* Redirect Net for TOS		*/
-#define ICMP_REDIR_HOSTTOS	3	/* Redirect Host for TOS	*/
-
-/* Codes for TIME_EXCEEDED. */
-#define ICMP_EXC_TTL		0	/* TTL count exceeded		*/
-#define ICMP_EXC_FRAGTIME	1	/* Fragment Reass time exceeded	*/
-
-
-struct icmphdr {
-  __u8		type;
-  __u8		code;
-  __sum16	checksum;
-  union {
-	struct {
-		__be16	id;
-		__be16	sequence;
-	} echo;
-	__be32	gateway;
-	struct {
-		__be16	__unused;
-		__be16	mtu;
-	} frag;
-  } un;
-};
-
-#ifdef __KERNEL__
-#include <linux/skbuff.h>
-
-static inline struct icmphdr *icmp_hdr(const struct sk_buff *skb)
-{
-	return (struct icmphdr *)skb_transport_header(skb);
-}
-#endif
-
-/*
- *	constants for (set|get)sockopt
- */
-
-#define ICMP_FILTER			1
-
-struct icmp_filter {
-	__u32		data;
-};
-
-
-#endif	/* _LINUX_ICMP_H */
diff --git a/ANDROID_3.4.5/include/linux/icmpv6.h b/ANDROID_3.4.5/include/linux/icmpv6.h
deleted file mode 100644
index ba45e6bc..00000000
--- a/ANDROID_3.4.5/include/linux/icmpv6.h
+++ /dev/null
@@ -1,196 +0,0 @@
-#ifndef _LINUX_ICMPV6_H
-#define _LINUX_ICMPV6_H
-
-#include <linux/types.h>
-#include <asm/byteorder.h>
-
-struct icmp6hdr {
-
-	__u8		icmp6_type;
-	__u8		icmp6_code;
-	__sum16		icmp6_cksum;
-
-
-	union {
-		__be32			un_data32[1];
-		__be16			un_data16[2];
-		__u8			un_data8[4];
-
-		struct icmpv6_echo {
-			__be16		identifier;
-			__be16		sequence;
-		} u_echo;
-
-                struct icmpv6_nd_advt {
-#if defined(__LITTLE_ENDIAN_BITFIELD)
-                        __u32		reserved:5,
-                        		override:1,
-                        		solicited:1,
-                        		router:1,
-					reserved2:24;
-#elif defined(__BIG_ENDIAN_BITFIELD)
-                        __u32		router:1,
-					solicited:1,
-                        		override:1,
-                        		reserved:29;
-#else
-#error	"Please fix <asm/byteorder.h>"
-#endif						
-                } u_nd_advt;
-
-                struct icmpv6_nd_ra {
-			__u8		hop_limit;
-#if defined(__LITTLE_ENDIAN_BITFIELD)
-			__u8		reserved:3,
-					router_pref:2,
-					home_agent:1,
-					other:1,
-					managed:1;
-
-#elif defined(__BIG_ENDIAN_BITFIELD)
-			__u8		managed:1,
-					other:1,
-					home_agent:1,
-					router_pref:2,
-					reserved:3;
-#else
-#error	"Please fix <asm/byteorder.h>"
-#endif
-			__be16		rt_lifetime;
-                } u_nd_ra;
-
-	} icmp6_dataun;
-
-#define icmp6_identifier	icmp6_dataun.u_echo.identifier
-#define icmp6_sequence		icmp6_dataun.u_echo.sequence
-#define icmp6_pointer		icmp6_dataun.un_data32[0]
-#define icmp6_mtu		icmp6_dataun.un_data32[0]
-#define icmp6_unused		icmp6_dataun.un_data32[0]
-#define icmp6_maxdelay		icmp6_dataun.un_data16[0]
-#define icmp6_router		icmp6_dataun.u_nd_advt.router
-#define icmp6_solicited		icmp6_dataun.u_nd_advt.solicited
-#define icmp6_override		icmp6_dataun.u_nd_advt.override
-#define icmp6_ndiscreserved	icmp6_dataun.u_nd_advt.reserved
-#define icmp6_hop_limit		icmp6_dataun.u_nd_ra.hop_limit
-#define icmp6_addrconf_managed	icmp6_dataun.u_nd_ra.managed
-#define icmp6_addrconf_other	icmp6_dataun.u_nd_ra.other
-#define icmp6_rt_lifetime	icmp6_dataun.u_nd_ra.rt_lifetime
-#define icmp6_router_pref	icmp6_dataun.u_nd_ra.router_pref
-};
-
-#ifdef __KERNEL__
-#include <linux/skbuff.h>
-
-static inline struct icmp6hdr *icmp6_hdr(const struct sk_buff *skb)
-{
-	return (struct icmp6hdr *)skb_transport_header(skb);
-}
-#endif
-
-#define ICMPV6_ROUTER_PREF_LOW		0x3
-#define ICMPV6_ROUTER_PREF_MEDIUM	0x0
-#define ICMPV6_ROUTER_PREF_HIGH		0x1
-#define ICMPV6_ROUTER_PREF_INVALID	0x2
-
-#define ICMPV6_DEST_UNREACH		1
-#define ICMPV6_PKT_TOOBIG		2
-#define ICMPV6_TIME_EXCEED		3
-#define ICMPV6_PARAMPROB		4
-
-#define ICMPV6_INFOMSG_MASK		0x80
-
-#define ICMPV6_ECHO_REQUEST		128
-#define ICMPV6_ECHO_REPLY		129
-#define ICMPV6_MGM_QUERY		130
-#define ICMPV6_MGM_REPORT       	131
-#define ICMPV6_MGM_REDUCTION    	132
-
-#define ICMPV6_NI_QUERY			139
-#define ICMPV6_NI_REPLY			140
-
-#define ICMPV6_MLD2_REPORT		143
-
-#define ICMPV6_DHAAD_REQUEST		144
-#define ICMPV6_DHAAD_REPLY		145
-#define ICMPV6_MOBILE_PREFIX_SOL	146
-#define ICMPV6_MOBILE_PREFIX_ADV	147
-
-/*
- *	Codes for Destination Unreachable
- */
-#define ICMPV6_NOROUTE			0
-#define ICMPV6_ADM_PROHIBITED		1
-#define ICMPV6_NOT_NEIGHBOUR		2
-#define ICMPV6_ADDR_UNREACH		3
-#define ICMPV6_PORT_UNREACH		4
-
-/*
- *	Codes for Time Exceeded
- */
-#define ICMPV6_EXC_HOPLIMIT		0
-#define ICMPV6_EXC_FRAGTIME		1
-
-/*
- *	Codes for Parameter Problem
- */
-#define ICMPV6_HDR_FIELD		0
-#define ICMPV6_UNK_NEXTHDR		1
-#define ICMPV6_UNK_OPTION		2
-
-/*
- *	constants for (set|get)sockopt
- */
-
-#define ICMPV6_FILTER			1
-
-/*
- *	ICMPV6 filter
- */
-
-#define ICMPV6_FILTER_BLOCK		1
-#define ICMPV6_FILTER_PASS		2
-#define ICMPV6_FILTER_BLOCKOTHERS	3
-#define ICMPV6_FILTER_PASSONLY		4
-
-struct icmp6_filter {
-	__u32		data[8];
-};
-
-/*
- *	Definitions for MLDv2
- */
-#define MLD2_MODE_IS_INCLUDE	1
-#define MLD2_MODE_IS_EXCLUDE	2
-#define MLD2_CHANGE_TO_INCLUDE	3
-#define MLD2_CHANGE_TO_EXCLUDE	4
-#define MLD2_ALLOW_NEW_SOURCES	5
-#define MLD2_BLOCK_OLD_SOURCES	6
-
-#define MLD2_ALL_MCR_INIT { { { 0xff,0x02,0,0,0,0,0,0,0,0,0,0,0,0,0,0x16 } } }
-
-#ifdef __KERNEL__
-
-#include <linux/netdevice.h>
-
-extern void				icmpv6_send(struct sk_buff *skb,
-						    u8 type, u8 code,
-						    __u32 info);
-
-extern int				icmpv6_init(void);
-extern int				icmpv6_err_convert(u8 type, u8 code,
-							   int *err);
-extern void				icmpv6_cleanup(void);
-extern void				icmpv6_param_prob(struct sk_buff *skb,
-							  u8 code, int pos);
-
-struct flowi6;
-struct in6_addr;
-extern void				icmpv6_flow_init(struct sock *sk,
-							 struct flowi6 *fl6,
-							 u8 type,
-							 const struct in6_addr *saddr,
-							 const struct in6_addr *daddr,
-							 int oif);
-#endif
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/ide.h b/ANDROID_3.4.5/include/linux/ide.h
deleted file mode 100644
index b1797491..00000000
--- a/ANDROID_3.4.5/include/linux/ide.h
+++ /dev/null
@@ -1,1558 +0,0 @@
-#ifndef _IDE_H
-#define _IDE_H
-/*
- *  linux/include/linux/ide.h
- *
- *  Copyright (C) 1994-2002  Linus Torvalds & authors
- */
-
-#include <linux/init.h>
-#include <linux/ioport.h>
-#include <linux/ata.h>
-#include <linux/blkdev.h>
-#include <linux/proc_fs.h>
-#include <linux/interrupt.h>
-#include <linux/bitops.h>
-#include <linux/bio.h>
-#include <linux/pci.h>
-#include <linux/completion.h>
-#include <linux/pm.h>
-#include <linux/mutex.h>
-#ifdef CONFIG_BLK_DEV_IDEACPI
-#include <acpi/acpi.h>
-#endif
-#include <asm/byteorder.h>
-#include <asm/io.h>
-
-/* for request_sense */
-#include <linux/cdrom.h>
-
-#if defined(CONFIG_CRIS) || defined(CONFIG_FRV) || defined(CONFIG_MN10300)
-# define SUPPORT_VLB_SYNC 0
-#else
-# define SUPPORT_VLB_SYNC 1
-#endif
-
-/*
- * Probably not wise to fiddle with these
- */
-#define IDE_DEFAULT_MAX_FAILURES	1
-#define ERROR_MAX	8	/* Max read/write errors per sector */
-#define ERROR_RESET	3	/* Reset controller every 4th retry */
-#define ERROR_RECAL	1	/* Recalibrate every 2nd retry */
-
-struct device;
-
-/* Error codes returned in rq->errors to the higher part of the driver. */
-enum {
-	IDE_DRV_ERROR_GENERAL	= 101,
-	IDE_DRV_ERROR_FILEMARK	= 102,
-	IDE_DRV_ERROR_EOD	= 103,
-};
-
-/*
- * Definitions for accessing IDE controller registers
- */
-#define IDE_NR_PORTS		(10)
-
-struct ide_io_ports {
-	unsigned long	data_addr;
-
-	union {
-		unsigned long error_addr;	/*   read:  error */
-		unsigned long feature_addr;	/*  write: feature */
-	};
-
-	unsigned long	nsect_addr;
-	unsigned long	lbal_addr;
-	unsigned long	lbam_addr;
-	unsigned long	lbah_addr;
-
-	unsigned long	device_addr;
-
-	union {
-		unsigned long status_addr;	/*  read: status  */
-		unsigned long command_addr;	/* write: command */
-	};
-
-	unsigned long	ctl_addr;
-
-	unsigned long	irq_addr;
-};
-
-#define OK_STAT(stat,good,bad)	(((stat)&((good)|(bad)))==(good))
-
-#define BAD_R_STAT	(ATA_BUSY | ATA_ERR)
-#define BAD_W_STAT	(BAD_R_STAT | ATA_DF)
-#define BAD_STAT	(BAD_R_STAT | ATA_DRQ)
-#define DRIVE_READY	(ATA_DRDY | ATA_DSC)
-
-#define BAD_CRC		(ATA_ABORTED | ATA_ICRC)
-
-#define SATA_NR_PORTS		(3)	/* 16 possible ?? */
-
-#define SATA_STATUS_OFFSET	(0)
-#define SATA_ERROR_OFFSET	(1)
-#define SATA_CONTROL_OFFSET	(2)
-
-/*
- * Our Physical Region Descriptor (PRD) table should be large enough
- * to handle the biggest I/O request we are likely to see.  Since requests
- * can have no more than 256 sectors, and since the typical blocksize is
- * two or more sectors, we could get by with a limit of 128 entries here for
- * the usual worst case.  Most requests seem to include some contiguous blocks,
- * further reducing the number of table entries required.
- *
- * The driver reverts to PIO mode for individual requests that exceed
- * this limit (possible with 512 byte blocksizes, eg. MSDOS f/s), so handling
- * 100% of all crazy scenarios here is not necessary.
- *
- * As it turns out though, we must allocate a full 4KB page for this,
- * so the two PRD tables (ide0 & ide1) will each get half of that,
- * allowing each to have about 256 entries (8 bytes each) from this.
- */
-#define PRD_BYTES       8
-#define PRD_ENTRIES	256
-
-/*
- * Some more useful definitions
- */
-#define PARTN_BITS	6	/* number of minor dev bits for partitions */
-#define MAX_DRIVES	2	/* per interface; 2 assumed by lots of code */
-#define SECTOR_SIZE	512
-
-/*
- * Timeouts for various operations:
- */
-enum {
-	/* spec allows up to 20ms, but CF cards and SSD drives need more */
-	WAIT_DRQ	= 1 * HZ,	/* 1s */
-	/* some laptops are very slow */
-	WAIT_READY	= 5 * HZ,	/* 5s */
-	/* should be less than 3ms (?), if all ATAPI CD is closed at boot */
-	WAIT_PIDENTIFY	= 10 * HZ,	/* 10s */
-	/* worst case when spinning up */
-	WAIT_WORSTCASE	= 30 * HZ,	/* 30s */
-	/* maximum wait for an IRQ to happen */
-	WAIT_CMD	= 10 * HZ,	/* 10s */
-	/* Some drives require a longer IRQ timeout. */
-	WAIT_FLOPPY_CMD	= 50 * HZ,	/* 50s */
-	/*
-	 * Some drives (for example, Seagate STT3401A Travan) require a very
-	 * long timeout, because they don't return an interrupt or clear their
-	 * BSY bit until after the command completes (even retension commands).
-	 */
-	WAIT_TAPE_CMD	= 900 * HZ,	/* 900s */
-	/* minimum sleep time */
-	WAIT_MIN_SLEEP	= HZ / 50,	/* 20ms */
-};
-
-/*
- * Op codes for special requests to be handled by ide_special_rq().
- * Values should be in the range of 0x20 to 0x3f.
- */
-#define REQ_DRIVE_RESET		0x20
-#define REQ_DEVSET_EXEC		0x21
-#define REQ_PARK_HEADS		0x22
-#define REQ_UNPARK_HEADS	0x23
-
-/*
- * hwif_chipset_t is used to keep track of the specific hardware
- * chipset used by each IDE interface, if known.
- */
-enum {		ide_unknown,	ide_generic,	ide_pci,
-		ide_cmd640,	ide_dtc2278,	ide_ali14xx,
-		ide_qd65xx,	ide_umc8672,	ide_ht6560b,
-		ide_4drives,	ide_pmac,	ide_acorn,
-		ide_au1xxx,	ide_palm3710
-};
-
-typedef u8 hwif_chipset_t;
-
-/*
- * Structure to hold all information about the location of this port
- */
-struct ide_hw {
-	union {
-		struct ide_io_ports	io_ports;
-		unsigned long		io_ports_array[IDE_NR_PORTS];
-	};
-
-	int		irq;			/* our irq number */
-	struct device	*dev, *parent;
-	unsigned long	config;
-};
-
-static inline void ide_std_init_ports(struct ide_hw *hw,
-				      unsigned long io_addr,
-				      unsigned long ctl_addr)
-{
-	unsigned int i;
-
-	for (i = 0; i <= 7; i++)
-		hw->io_ports_array[i] = io_addr++;
-
-	hw->io_ports.ctl_addr = ctl_addr;
-}
-
-#define MAX_HWIFS	10
-
-/*
- * Now for the data we need to maintain per-drive:  ide_drive_t
- */
-
-#define ide_scsi	0x21
-#define ide_disk	0x20
-#define ide_optical	0x7
-#define ide_cdrom	0x5
-#define ide_tape	0x1
-#define ide_floppy	0x0
-
-/*
- * Special Driver Flags
- */
-enum {
-	IDE_SFLAG_SET_GEOMETRY		= (1 << 0),
-	IDE_SFLAG_RECALIBRATE		= (1 << 1),
-	IDE_SFLAG_SET_MULTMODE		= (1 << 2),
-};
-
-/*
- * Status returned from various ide_ functions
- */
-typedef enum {
-	ide_stopped,	/* no drive operation was started */
-	ide_started,	/* a drive operation was started, handler was set */
-} ide_startstop_t;
-
-enum {
-	IDE_VALID_ERROR 		= (1 << 1),
-	IDE_VALID_FEATURE		= IDE_VALID_ERROR,
-	IDE_VALID_NSECT 		= (1 << 2),
-	IDE_VALID_LBAL			= (1 << 3),
-	IDE_VALID_LBAM			= (1 << 4),
-	IDE_VALID_LBAH			= (1 << 5),
-	IDE_VALID_DEVICE		= (1 << 6),
-	IDE_VALID_LBA			= IDE_VALID_LBAL |
-					  IDE_VALID_LBAM |
-					  IDE_VALID_LBAH,
-	IDE_VALID_OUT_TF		= IDE_VALID_FEATURE |
-					  IDE_VALID_NSECT |
-					  IDE_VALID_LBA,
-	IDE_VALID_IN_TF 		= IDE_VALID_NSECT |
-					  IDE_VALID_LBA,
-	IDE_VALID_OUT_HOB		= IDE_VALID_OUT_TF,
-	IDE_VALID_IN_HOB		= IDE_VALID_ERROR |
-					  IDE_VALID_NSECT |
-					  IDE_VALID_LBA,
-};
-
-enum {
-	IDE_TFLAG_LBA48			= (1 << 0),
-	IDE_TFLAG_WRITE			= (1 << 1),
-	IDE_TFLAG_CUSTOM_HANDLER	= (1 << 2),
-	IDE_TFLAG_DMA_PIO_FALLBACK	= (1 << 3),
-	/* force 16-bit I/O operations */
-	IDE_TFLAG_IO_16BIT		= (1 << 4),
-	/* struct ide_cmd was allocated using kmalloc() */
-	IDE_TFLAG_DYN			= (1 << 5),
-	IDE_TFLAG_FS			= (1 << 6),
-	IDE_TFLAG_MULTI_PIO		= (1 << 7),
-	IDE_TFLAG_SET_XFER		= (1 << 8),
-};
-
-enum {
-	IDE_FTFLAG_FLAGGED		= (1 << 0),
-	IDE_FTFLAG_SET_IN_FLAGS		= (1 << 1),
-	IDE_FTFLAG_OUT_DATA		= (1 << 2),
-	IDE_FTFLAG_IN_DATA		= (1 << 3),
-};
-
-struct ide_taskfile {
-	u8	data;		/* 0: data byte (for TASKFILE ioctl) */
-	union {			/* 1: */
-		u8 error;	/*  read: error */
-		u8 feature;	/* write: feature */
-	};
-	u8	nsect;		/* 2: number of sectors */
-	u8	lbal;		/* 3: LBA low */
-	u8	lbam;		/* 4: LBA mid */
-	u8	lbah;		/* 5: LBA high */
-	u8	device;		/* 6: device select */
-	union {			/* 7: */
-		u8 status;	/*  read: status */
-		u8 command;	/* write: command */
-	};
-};
-
-struct ide_cmd {
-	struct ide_taskfile	tf;
-	struct ide_taskfile	hob;
-	struct {
-		struct {
-			u8		tf;
-			u8		hob;
-		} out, in;
-	} valid;
-
-	u16			tf_flags;
-	u8			ftf_flags;	/* for TASKFILE ioctl */
-	int			protocol;
-
-	int			sg_nents;	  /* number of sg entries */
-	int			orig_sg_nents;
-	int			sg_dma_direction; /* DMA transfer direction */
-
-	unsigned int		nbytes;
-	unsigned int		nleft;
-	unsigned int		last_xfer_len;
-
-	struct scatterlist	*cursg;
-	unsigned int		cursg_ofs;
-
-	struct request		*rq;		/* copy of request */
-};
-
-/* ATAPI packet command flags */
-enum {
-	/* set when an error is considered normal - no retry (ide-tape) */
-	PC_FLAG_ABORT			= (1 << 0),
-	PC_FLAG_SUPPRESS_ERROR		= (1 << 1),
-	PC_FLAG_WAIT_FOR_DSC		= (1 << 2),
-	PC_FLAG_DMA_OK			= (1 << 3),
-	PC_FLAG_DMA_IN_PROGRESS		= (1 << 4),
-	PC_FLAG_DMA_ERROR		= (1 << 5),
-	PC_FLAG_WRITING			= (1 << 6),
-};
-
-#define ATAPI_WAIT_PC		(60 * HZ)
-
-struct ide_atapi_pc {
-	/* actual packet bytes */
-	u8 c[12];
-	/* incremented on each retry */
-	int retries;
-	int error;
-
-	/* bytes to transfer */
-	int req_xfer;
-
-	/* the corresponding request */
-	struct request *rq;
-
-	unsigned long flags;
-
-	/*
-	 * those are more or less driver-specific and some of them are subject
-	 * to change/removal later.
-	 */
-	unsigned long timeout;
-};
-
-struct ide_devset;
-struct ide_driver;
-
-#ifdef CONFIG_BLK_DEV_IDEACPI
-struct ide_acpi_drive_link;
-struct ide_acpi_hwif_link;
-#endif
-
-struct ide_drive_s;
-
-struct ide_disk_ops {
-	int		(*check)(struct ide_drive_s *, const char *);
-	int		(*get_capacity)(struct ide_drive_s *);
-	void		(*unlock_native_capacity)(struct ide_drive_s *);
-	void		(*setup)(struct ide_drive_s *);
-	void		(*flush)(struct ide_drive_s *);
-	int		(*init_media)(struct ide_drive_s *, struct gendisk *);
-	int		(*set_doorlock)(struct ide_drive_s *, struct gendisk *,
-					int);
-	ide_startstop_t	(*do_request)(struct ide_drive_s *, struct request *,
-				      sector_t);
-	int		(*ioctl)(struct ide_drive_s *, struct block_device *,
-				 fmode_t, unsigned int, unsigned long);
-};
-
-/* ATAPI device flags */
-enum {
-	IDE_AFLAG_DRQ_INTERRUPT		= (1 << 0),
-
-	/* ide-cd */
-	/* Drive cannot eject the disc. */
-	IDE_AFLAG_NO_EJECT		= (1 << 1),
-	/* Drive is a pre ATAPI 1.2 drive. */
-	IDE_AFLAG_PRE_ATAPI12		= (1 << 2),
-	/* TOC addresses are in BCD. */
-	IDE_AFLAG_TOCADDR_AS_BCD	= (1 << 3),
-	/* TOC track numbers are in BCD. */
-	IDE_AFLAG_TOCTRACKS_AS_BCD	= (1 << 4),
-	/* Saved TOC information is current. */
-	IDE_AFLAG_TOC_VALID		= (1 << 6),
-	/* We think that the drive door is locked. */
-	IDE_AFLAG_DOOR_LOCKED		= (1 << 7),
-	/* SET_CD_SPEED command is unsupported. */
-	IDE_AFLAG_NO_SPEED_SELECT	= (1 << 8),
-	IDE_AFLAG_VERTOS_300_SSD	= (1 << 9),
-	IDE_AFLAG_VERTOS_600_ESD	= (1 << 10),
-	IDE_AFLAG_SANYO_3CD		= (1 << 11),
-	IDE_AFLAG_FULL_CAPS_PAGE	= (1 << 12),
-	IDE_AFLAG_PLAY_AUDIO_OK		= (1 << 13),
-	IDE_AFLAG_LE_SPEED_FIELDS	= (1 << 14),
-
-	/* ide-floppy */
-	/* Avoid commands not supported in Clik drive */
-	IDE_AFLAG_CLIK_DRIVE		= (1 << 15),
-	/* Requires BH algorithm for packets */
-	IDE_AFLAG_ZIP_DRIVE		= (1 << 16),
-	/* Supports format progress report */
-	IDE_AFLAG_SRFP			= (1 << 17),
-
-	/* ide-tape */
-	IDE_AFLAG_IGNORE_DSC		= (1 << 18),
-	/* 0 When the tape position is unknown */
-	IDE_AFLAG_ADDRESS_VALID		= (1 <<	19),
-	/* Device already opened */
-	IDE_AFLAG_BUSY			= (1 << 20),
-	/* Attempt to auto-detect the current user block size */
-	IDE_AFLAG_DETECT_BS		= (1 << 21),
-	/* Currently on a filemark */
-	IDE_AFLAG_FILEMARK		= (1 << 22),
-	/* 0 = no tape is loaded, so we don't rewind after ejecting */
-	IDE_AFLAG_MEDIUM_PRESENT	= (1 << 23),
-
-	IDE_AFLAG_NO_AUTOCLOSE		= (1 << 24),
-};
-
-/* device flags */
-enum {
-	/* restore settings after device reset */
-	IDE_DFLAG_KEEP_SETTINGS		= (1 << 0),
-	/* device is using DMA for read/write */
-	IDE_DFLAG_USING_DMA		= (1 << 1),
-	/* okay to unmask other IRQs */
-	IDE_DFLAG_UNMASK		= (1 << 2),
-	/* don't attempt flushes */
-	IDE_DFLAG_NOFLUSH		= (1 << 3),
-	/* DSC overlap */
-	IDE_DFLAG_DSC_OVERLAP		= (1 << 4),
-	/* give potential excess bandwidth */
-	IDE_DFLAG_NICE1			= (1 << 5),
-	/* device is physically present */
-	IDE_DFLAG_PRESENT		= (1 << 6),
-	/* disable Host Protected Area */
-	IDE_DFLAG_NOHPA			= (1 << 7),
-	/* id read from device (synthetic if not set) */
-	IDE_DFLAG_ID_READ		= (1 << 8),
-	IDE_DFLAG_NOPROBE		= (1 << 9),
-	/* need to do check_media_change() */
-	IDE_DFLAG_REMOVABLE		= (1 << 10),
-	/* needed for removable devices */
-	IDE_DFLAG_ATTACH		= (1 << 11),
-	IDE_DFLAG_FORCED_GEOM		= (1 << 12),
-	/* disallow setting unmask bit */
-	IDE_DFLAG_NO_UNMASK		= (1 << 13),
-	/* disallow enabling 32-bit I/O */
-	IDE_DFLAG_NO_IO_32BIT		= (1 << 14),
-	/* for removable only: door lock/unlock works */
-	IDE_DFLAG_DOORLOCKING		= (1 << 15),
-	/* disallow DMA */
-	IDE_DFLAG_NODMA			= (1 << 16),
-	/* powermanagement told us not to do anything, so sleep nicely */
-	IDE_DFLAG_BLOCKED		= (1 << 17),
-	/* sleeping & sleep field valid */
-	IDE_DFLAG_SLEEPING		= (1 << 18),
-	IDE_DFLAG_POST_RESET		= (1 << 19),
-	IDE_DFLAG_UDMA33_WARNED		= (1 << 20),
-	IDE_DFLAG_LBA48			= (1 << 21),
-	/* status of write cache */
-	IDE_DFLAG_WCACHE		= (1 << 22),
-	/* used for ignoring ATA_DF */
-	IDE_DFLAG_NOWERR		= (1 << 23),
-	/* retrying in PIO */
-	IDE_DFLAG_DMA_PIO_RETRY		= (1 << 24),
-	IDE_DFLAG_LBA			= (1 << 25),
-	/* don't unload heads */
-	IDE_DFLAG_NO_UNLOAD		= (1 << 26),
-	/* heads unloaded, please don't reset port */
-	IDE_DFLAG_PARKED		= (1 << 27),
-	IDE_DFLAG_MEDIA_CHANGED		= (1 << 28),
-	/* write protect */
-	IDE_DFLAG_WP			= (1 << 29),
-	IDE_DFLAG_FORMAT_IN_PROGRESS	= (1 << 30),
-	IDE_DFLAG_NIEN_QUIRK		= (1 << 31),
-};
-
-struct ide_drive_s {
-	char		name[4];	/* drive name, such as "hda" */
-        char            driver_req[10];	/* requests specific driver */
-
-	struct request_queue	*queue;	/* request queue */
-
-	struct request		*rq;	/* current request */
-	void		*driver_data;	/* extra driver data */
-	u16			*id;	/* identification info */
-#ifdef CONFIG_IDE_PROC_FS
-	struct proc_dir_entry *proc;	/* /proc/ide/ directory entry */
-	const struct ide_proc_devset *settings; /* /proc/ide/ drive settings */
-#endif
-	struct hwif_s		*hwif;	/* actually (ide_hwif_t *) */
-
-	const struct ide_disk_ops *disk_ops;
-
-	unsigned long dev_flags;
-
-	unsigned long sleep;		/* sleep until this time */
-	unsigned long timeout;		/* max time to wait for irq */
-
-	u8	special_flags;		/* special action flags */
-
-	u8	select;			/* basic drive/head select reg value */
-	u8	retry_pio;		/* retrying dma capable host in pio */
-	u8	waiting_for_dma;	/* dma currently in progress */
-	u8	dma;			/* atapi dma flag */
-
-        u8	init_speed;	/* transfer rate set at boot */
-        u8	current_speed;	/* current transfer rate set */
-	u8	desired_speed;	/* desired transfer rate set */
-	u8	pio_mode;	/* for ->set_pio_mode _only_ */
-	u8	dma_mode;	/* for ->set_dma_mode _only_ */
-	u8	dn;		/* now wide spread use */
-	u8	acoustic;	/* acoustic management */
-	u8	media;		/* disk, cdrom, tape, floppy, ... */
-	u8	ready_stat;	/* min status value for drive ready */
-	u8	mult_count;	/* current multiple sector setting */
-	u8	mult_req;	/* requested multiple sector setting */
-	u8	io_32bit;	/* 0=16-bit, 1=32-bit, 2/3=32bit+sync */
-	u8	bad_wstat;	/* used for ignoring ATA_DF */
-	u8	head;		/* "real" number of heads */
-	u8	sect;		/* "real" sectors per track */
-	u8	bios_head;	/* BIOS/fdisk/LILO number of heads */
-	u8	bios_sect;	/* BIOS/fdisk/LILO sectors per track */
-
-	/* delay this long before sending packet command */
-	u8 pc_delay;
-
-	unsigned int	bios_cyl;	/* BIOS/fdisk/LILO number of cyls */
-	unsigned int	cyl;		/* "real" number of cyls */
-	void		*drive_data;	/* used by set_pio_mode/dev_select() */
-	unsigned int	failures;	/* current failure count */
-	unsigned int	max_failures;	/* maximum allowed failure count */
-	u64		probed_capacity;/* initial/native media capacity */
-	u64		capacity64;	/* total number of sectors */
-
-	int		lun;		/* logical unit */
-	int		crc_count;	/* crc counter to reduce drive speed */
-
-	unsigned long	debug_mask;	/* debugging levels switch */
-
-#ifdef CONFIG_BLK_DEV_IDEACPI
-	struct ide_acpi_drive_link *acpidata;
-#endif
-	struct list_head list;
-	struct device	gendev;
-	struct completion gendev_rel_comp;	/* to deal with device release() */
-
-	/* current packet command */
-	struct ide_atapi_pc *pc;
-
-	/* last failed packet command */
-	struct ide_atapi_pc *failed_pc;
-
-	/* callback for packet commands */
-	int  (*pc_callback)(struct ide_drive_s *, int);
-
-	ide_startstop_t (*irq_handler)(struct ide_drive_s *);
-
-	unsigned long atapi_flags;
-
-	struct ide_atapi_pc request_sense_pc;
-
-	/* current sense rq and buffer */
-	bool sense_rq_armed;
-	struct request sense_rq;
-	struct request_sense sense_data;
-};
-
-typedef struct ide_drive_s ide_drive_t;
-
-#define to_ide_device(dev)		container_of(dev, ide_drive_t, gendev)
-
-#define to_ide_drv(obj, cont_type)	\
-	container_of(obj, struct cont_type, dev)
-
-#define ide_drv_g(disk, cont_type)	\
-	container_of((disk)->private_data, struct cont_type, driver)
-
-struct ide_port_info;
-
-struct ide_tp_ops {
-	void	(*exec_command)(struct hwif_s *, u8);
-	u8	(*read_status)(struct hwif_s *);
-	u8	(*read_altstatus)(struct hwif_s *);
-	void	(*write_devctl)(struct hwif_s *, u8);
-
-	void	(*dev_select)(ide_drive_t *);
-	void	(*tf_load)(ide_drive_t *, struct ide_taskfile *, u8);
-	void	(*tf_read)(ide_drive_t *, struct ide_taskfile *, u8);
-
-	void	(*input_data)(ide_drive_t *, struct ide_cmd *,
-			      void *, unsigned int);
-	void	(*output_data)(ide_drive_t *, struct ide_cmd *,
-			       void *, unsigned int);
-};
-
-extern const struct ide_tp_ops default_tp_ops;
-
-/**
- * struct ide_port_ops - IDE port operations
- *
- * @init_dev:		host specific initialization of a device
- * @set_pio_mode:	routine to program host for PIO mode
- * @set_dma_mode:	routine to program host for DMA mode
- * @reset_poll:		chipset polling based on hba specifics
- * @pre_reset:		chipset specific changes to default for device-hba resets
- * @resetproc:		routine to reset controller after a disk reset
- * @maskproc:		special host masking for drive selection
- * @quirkproc:		check host's drive quirk list
- * @clear_irq:		clear IRQ
- *
- * @mdma_filter:	filter MDMA modes
- * @udma_filter:	filter UDMA modes
- *
- * @cable_detect:	detect cable type
- */
-struct ide_port_ops {
-	void	(*init_dev)(ide_drive_t *);
-	void	(*set_pio_mode)(struct hwif_s *, ide_drive_t *);
-	void	(*set_dma_mode)(struct hwif_s *, ide_drive_t *);
-	int	(*reset_poll)(ide_drive_t *);
-	void	(*pre_reset)(ide_drive_t *);
-	void	(*resetproc)(ide_drive_t *);
-	void	(*maskproc)(ide_drive_t *, int);
-	void	(*quirkproc)(ide_drive_t *);
-	void	(*clear_irq)(ide_drive_t *);
-	int	(*test_irq)(struct hwif_s *);
-
-	u8	(*mdma_filter)(ide_drive_t *);
-	u8	(*udma_filter)(ide_drive_t *);
-
-	u8	(*cable_detect)(struct hwif_s *);
-};
-
-struct ide_dma_ops {
-	void	(*dma_host_set)(struct ide_drive_s *, int);
-	int	(*dma_setup)(struct ide_drive_s *, struct ide_cmd *);
-	void	(*dma_start)(struct ide_drive_s *);
-	int	(*dma_end)(struct ide_drive_s *);
-	int	(*dma_test_irq)(struct ide_drive_s *);
-	void	(*dma_lost_irq)(struct ide_drive_s *);
-	/* below ones are optional */
-	int	(*dma_check)(struct ide_drive_s *, struct ide_cmd *);
-	int	(*dma_timer_expiry)(struct ide_drive_s *);
-	void	(*dma_clear)(struct ide_drive_s *);
-	/*
-	 * The following method is optional and only required to be
-	 * implemented for the SFF-8038i compatible controllers.
-	 */
-	u8	(*dma_sff_read_status)(struct hwif_s *);
-};
-
-enum {
-	IDE_PFLAG_PROBING		= (1 << 0),
-};
-
-struct ide_host;
-
-typedef struct hwif_s {
-	struct hwif_s *mate;		/* other hwif from same PCI chip */
-	struct proc_dir_entry *proc;	/* /proc/ide/ directory entry */
-
-	struct ide_host *host;
-
-	char name[6];			/* name of interface, eg. "ide0" */
-
-	struct ide_io_ports	io_ports;
-
-	unsigned long	sata_scr[SATA_NR_PORTS];
-
-	ide_drive_t	*devices[MAX_DRIVES + 1];
-
-	unsigned long	port_flags;
-
-	u8 major;	/* our major number */
-	u8 index;	/* 0 for ide0; 1 for ide1; ... */
-	u8 channel;	/* for dual-port chips: 0=primary, 1=secondary */
-
-	u32 host_flags;
-
-	u8 pio_mask;
-
-	u8 ultra_mask;
-	u8 mwdma_mask;
-	u8 swdma_mask;
-
-	u8 cbl;		/* cable type */
-
-	hwif_chipset_t chipset;	/* sub-module for tuning.. */
-
-	struct device *dev;
-
-	void (*rw_disk)(ide_drive_t *, struct request *);
-
-	const struct ide_tp_ops		*tp_ops;
-	const struct ide_port_ops	*port_ops;
-	const struct ide_dma_ops	*dma_ops;
-
-	/* dma physical region descriptor table (cpu view) */
-	unsigned int	*dmatable_cpu;
-	/* dma physical region descriptor table (dma view) */
-	dma_addr_t	dmatable_dma;
-
-	/* maximum number of PRD table entries */
-	int prd_max_nents;
-	/* PRD entry size in bytes */
-	int prd_ent_size;
-
-	/* Scatter-gather list used to build the above */
-	struct scatterlist *sg_table;
-	int sg_max_nents;		/* Maximum number of entries in it */
-
-	struct ide_cmd cmd;		/* current command */
-
-	int		rqsize;		/* max sectors per request */
-	int		irq;		/* our irq number */
-
-	unsigned long	dma_base;	/* base addr for dma ports */
-
-	unsigned long	config_data;	/* for use by chipset-specific code */
-	unsigned long	select_data;	/* for use by chipset-specific code */
-
-	unsigned long	extra_base;	/* extra addr for dma ports */
-	unsigned	extra_ports;	/* number of extra dma ports */
-
-	unsigned	present    : 1;	/* this interface exists */
-	unsigned	busy	   : 1; /* serializes devices on a port */
-
-	struct device		gendev;
-	struct device		*portdev;
-
-	struct completion gendev_rel_comp; /* To deal with device release() */
-
-	void		*hwif_data;	/* extra hwif data */
-
-#ifdef CONFIG_BLK_DEV_IDEACPI
-	struct ide_acpi_hwif_link *acpidata;
-#endif
-
-	/* IRQ handler, if active */
-	ide_startstop_t	(*handler)(ide_drive_t *);
-
-	/* BOOL: polling active & poll_timeout field valid */
-	unsigned int polling : 1;
-
-	/* current drive */
-	ide_drive_t *cur_dev;
-
-	/* current request */
-	struct request *rq;
-
-	/* failsafe timer */
-	struct timer_list timer;
-	/* timeout value during long polls */
-	unsigned long poll_timeout;
-	/* queried upon timeouts */
-	int (*expiry)(ide_drive_t *);
-
-	int req_gen;
-	int req_gen_timer;
-
-	spinlock_t lock;
-} ____cacheline_internodealigned_in_smp ide_hwif_t;
-
-#define MAX_HOST_PORTS 4
-
-struct ide_host {
-	ide_hwif_t	*ports[MAX_HOST_PORTS + 1];
-	unsigned int	n_ports;
-	struct device	*dev[2];
-
-	int		(*init_chipset)(struct pci_dev *);
-
-	void		(*get_lock)(irq_handler_t, void *);
-	void		(*release_lock)(void);
-
-	irq_handler_t	irq_handler;
-
-	unsigned long	host_flags;
-
-	int		irq_flags;
-
-	void		*host_priv;
-	ide_hwif_t	*cur_port;	/* for hosts requiring serialization */
-
-	/* used for hosts requiring serialization */
-	volatile unsigned long	host_busy;
-};
-
-#define IDE_HOST_BUSY 0
-
-/*
- *  internal ide interrupt handler type
- */
-typedef ide_startstop_t (ide_handler_t)(ide_drive_t *);
-typedef int (ide_expiry_t)(ide_drive_t *);
-
-/* used by ide-cd, ide-floppy, etc. */
-typedef void (xfer_func_t)(ide_drive_t *, struct ide_cmd *, void *, unsigned);
-
-extern struct mutex ide_setting_mtx;
-
-/*
- * configurable drive settings
- */
-
-#define DS_SYNC	(1 << 0)
-
-struct ide_devset {
-	int		(*get)(ide_drive_t *);
-	int		(*set)(ide_drive_t *, int);
-	unsigned int	flags;
-};
-
-#define __DEVSET(_flags, _get, _set) { \
-	.flags	= _flags, \
-	.get	= _get,	\
-	.set	= _set,	\
-}
-
-#define ide_devset_get(name, field) \
-static int get_##name(ide_drive_t *drive) \
-{ \
-	return drive->field; \
-}
-
-#define ide_devset_set(name, field) \
-static int set_##name(ide_drive_t *drive, int arg) \
-{ \
-	drive->field = arg; \
-	return 0; \
-}
-
-#define ide_devset_get_flag(name, flag) \
-static int get_##name(ide_drive_t *drive) \
-{ \
-	return !!(drive->dev_flags & flag); \
-}
-
-#define ide_devset_set_flag(name, flag) \
-static int set_##name(ide_drive_t *drive, int arg) \
-{ \
-	if (arg) \
-		drive->dev_flags |= flag; \
-	else \
-		drive->dev_flags &= ~flag; \
-	return 0; \
-}
-
-#define __IDE_DEVSET(_name, _flags, _get, _set) \
-const struct ide_devset ide_devset_##_name = \
-	__DEVSET(_flags, _get, _set)
-
-#define IDE_DEVSET(_name, _flags, _get, _set) \
-static __IDE_DEVSET(_name, _flags, _get, _set)
-
-#define ide_devset_rw(_name, _func) \
-IDE_DEVSET(_name, 0, get_##_func, set_##_func)
-
-#define ide_devset_w(_name, _func) \
-IDE_DEVSET(_name, 0, NULL, set_##_func)
-
-#define ide_ext_devset_rw(_name, _func) \
-__IDE_DEVSET(_name, 0, get_##_func, set_##_func)
-
-#define ide_ext_devset_rw_sync(_name, _func) \
-__IDE_DEVSET(_name, DS_SYNC, get_##_func, set_##_func)
-
-#define ide_decl_devset(_name) \
-extern const struct ide_devset ide_devset_##_name
-
-ide_decl_devset(io_32bit);
-ide_decl_devset(keepsettings);
-ide_decl_devset(pio_mode);
-ide_decl_devset(unmaskirq);
-ide_decl_devset(using_dma);
-
-#ifdef CONFIG_IDE_PROC_FS
-/*
- * /proc/ide interface
- */
-
-#define ide_devset_rw_field(_name, _field) \
-ide_devset_get(_name, _field); \
-ide_devset_set(_name, _field); \
-IDE_DEVSET(_name, DS_SYNC, get_##_name, set_##_name)
-
-#define ide_devset_rw_flag(_name, _field) \
-ide_devset_get_flag(_name, _field); \
-ide_devset_set_flag(_name, _field); \
-IDE_DEVSET(_name, DS_SYNC, get_##_name, set_##_name)
-
-struct ide_proc_devset {
-	const char		*name;
-	const struct ide_devset	*setting;
-	int			min, max;
-	int			(*mulf)(ide_drive_t *);
-	int			(*divf)(ide_drive_t *);
-};
-
-#define __IDE_PROC_DEVSET(_name, _min, _max, _mulf, _divf) { \
-	.name = __stringify(_name), \
-	.setting = &ide_devset_##_name, \
-	.min = _min, \
-	.max = _max, \
-	.mulf = _mulf, \
-	.divf = _divf, \
-}
-
-#define IDE_PROC_DEVSET(_name, _min, _max) \
-__IDE_PROC_DEVSET(_name, _min, _max, NULL, NULL)
-
-typedef struct {
-	const char	*name;
-	umode_t		mode;
-	const struct file_operations *proc_fops;
-} ide_proc_entry_t;
-
-void proc_ide_create(void);
-void proc_ide_destroy(void);
-void ide_proc_register_port(ide_hwif_t *);
-void ide_proc_port_register_devices(ide_hwif_t *);
-void ide_proc_unregister_device(ide_drive_t *);
-void ide_proc_unregister_port(ide_hwif_t *);
-void ide_proc_register_driver(ide_drive_t *, struct ide_driver *);
-void ide_proc_unregister_driver(ide_drive_t *, struct ide_driver *);
-
-extern const struct file_operations ide_capacity_proc_fops;
-extern const struct file_operations ide_geometry_proc_fops;
-#else
-static inline void proc_ide_create(void) { ; }
-static inline void proc_ide_destroy(void) { ; }
-static inline void ide_proc_register_port(ide_hwif_t *hwif) { ; }
-static inline void ide_proc_port_register_devices(ide_hwif_t *hwif) { ; }
-static inline void ide_proc_unregister_device(ide_drive_t *drive) { ; }
-static inline void ide_proc_unregister_port(ide_hwif_t *hwif) { ; }
-static inline void ide_proc_register_driver(ide_drive_t *drive,
-					    struct ide_driver *driver) { ; }
-static inline void ide_proc_unregister_driver(ide_drive_t *drive,
-					      struct ide_driver *driver) { ; }
-#endif
-
-enum {
-	/* enter/exit functions */
-	IDE_DBG_FUNC =			(1 << 0),
-	/* sense key/asc handling */
-	IDE_DBG_SENSE =			(1 << 1),
-	/* packet commands handling */
-	IDE_DBG_PC =			(1 << 2),
-	/* request handling */
-	IDE_DBG_RQ =			(1 << 3),
-	/* driver probing/setup */
-	IDE_DBG_PROBE =			(1 << 4),
-};
-
-/* DRV_NAME has to be defined in the driver before using the macro below */
-#define __ide_debug_log(lvl, fmt, args...)				\
-{									\
-	if (unlikely(drive->debug_mask & lvl))				\
-		printk(KERN_INFO DRV_NAME ": %s: " fmt "\n",		\
-					  __func__, ## args);		\
-}
-
-/*
- * Power Management state machine (rq->pm->pm_step).
- *
- * For each step, the core calls ide_start_power_step() first.
- * This can return:
- *	- ide_stopped :	In this case, the core calls us back again unless
- *			step have been set to ide_power_state_completed.
- *	- ide_started :	In this case, the channel is left busy until an
- *			async event (interrupt) occurs.
- * Typically, ide_start_power_step() will issue a taskfile request with
- * do_rw_taskfile().
- *
- * Upon reception of the interrupt, the core will call ide_complete_power_step()
- * with the error code if any. This routine should update the step value
- * and return. It should not start a new request. The core will call
- * ide_start_power_step() for the new step value, unless step have been
- * set to IDE_PM_COMPLETED.
- */
-enum {
-	IDE_PM_START_SUSPEND,
-	IDE_PM_FLUSH_CACHE	= IDE_PM_START_SUSPEND,
-	IDE_PM_STANDBY,
-
-	IDE_PM_START_RESUME,
-	IDE_PM_RESTORE_PIO	= IDE_PM_START_RESUME,
-	IDE_PM_IDLE,
-	IDE_PM_RESTORE_DMA,
-
-	IDE_PM_COMPLETED,
-};
-
-int generic_ide_suspend(struct device *, pm_message_t);
-int generic_ide_resume(struct device *);
-
-void ide_complete_power_step(ide_drive_t *, struct request *);
-ide_startstop_t ide_start_power_step(ide_drive_t *, struct request *);
-void ide_complete_pm_rq(ide_drive_t *, struct request *);
-void ide_check_pm_state(ide_drive_t *, struct request *);
-
-/*
- * Subdrivers support.
- *
- * The gendriver.owner field should be set to the module owner of this driver.
- * The gendriver.name field should be set to the name of this driver
- */
-struct ide_driver {
-	const char			*version;
-	ide_startstop_t	(*do_request)(ide_drive_t *, struct request *, sector_t);
-	struct device_driver	gen_driver;
-	int		(*probe)(ide_drive_t *);
-	void		(*remove)(ide_drive_t *);
-	void		(*resume)(ide_drive_t *);
-	void		(*shutdown)(ide_drive_t *);
-#ifdef CONFIG_IDE_PROC_FS
-	ide_proc_entry_t *		(*proc_entries)(ide_drive_t *);
-	const struct ide_proc_devset *	(*proc_devsets)(ide_drive_t *);
-#endif
-};
-
-#define to_ide_driver(drv) container_of(drv, struct ide_driver, gen_driver)
-
-int ide_device_get(ide_drive_t *);
-void ide_device_put(ide_drive_t *);
-
-struct ide_ioctl_devset {
-	unsigned int	get_ioctl;
-	unsigned int	set_ioctl;
-	const struct ide_devset *setting;
-};
-
-int ide_setting_ioctl(ide_drive_t *, struct block_device *, unsigned int,
-		      unsigned long, const struct ide_ioctl_devset *);
-
-int generic_ide_ioctl(ide_drive_t *, struct block_device *, unsigned, unsigned long);
-
-extern int ide_vlb_clk;
-extern int ide_pci_clk;
-
-int ide_end_rq(ide_drive_t *, struct request *, int, unsigned int);
-void ide_kill_rq(ide_drive_t *, struct request *);
-
-void __ide_set_handler(ide_drive_t *, ide_handler_t *, unsigned int);
-void ide_set_handler(ide_drive_t *, ide_handler_t *, unsigned int);
-
-void ide_execute_command(ide_drive_t *, struct ide_cmd *, ide_handler_t *,
-			 unsigned int);
-
-void ide_pad_transfer(ide_drive_t *, int, int);
-
-ide_startstop_t ide_error(ide_drive_t *, const char *, u8);
-
-void ide_fix_driveid(u16 *);
-
-extern void ide_fixstring(u8 *, const int, const int);
-
-int ide_busy_sleep(ide_drive_t *, unsigned long, int);
-
-int __ide_wait_stat(ide_drive_t *, u8, u8, unsigned long, u8 *);
-int ide_wait_stat(ide_startstop_t *, ide_drive_t *, u8, u8, unsigned long);
-
-ide_startstop_t ide_do_park_unpark(ide_drive_t *, struct request *);
-ide_startstop_t ide_do_devset(ide_drive_t *, struct request *);
-
-extern ide_startstop_t ide_do_reset (ide_drive_t *);
-
-extern int ide_devset_execute(ide_drive_t *drive,
-			      const struct ide_devset *setting, int arg);
-
-void ide_complete_cmd(ide_drive_t *, struct ide_cmd *, u8, u8);
-int ide_complete_rq(ide_drive_t *, int, unsigned int);
-
-void ide_tf_readback(ide_drive_t *drive, struct ide_cmd *cmd);
-void ide_tf_dump(const char *, struct ide_cmd *);
-
-void ide_exec_command(ide_hwif_t *, u8);
-u8 ide_read_status(ide_hwif_t *);
-u8 ide_read_altstatus(ide_hwif_t *);
-void ide_write_devctl(ide_hwif_t *, u8);
-
-void ide_dev_select(ide_drive_t *);
-void ide_tf_load(ide_drive_t *, struct ide_taskfile *, u8);
-void ide_tf_read(ide_drive_t *, struct ide_taskfile *, u8);
-
-void ide_input_data(ide_drive_t *, struct ide_cmd *, void *, unsigned int);
-void ide_output_data(ide_drive_t *, struct ide_cmd *, void *, unsigned int);
-
-void SELECT_MASK(ide_drive_t *, int);
-
-u8 ide_read_error(ide_drive_t *);
-void ide_read_bcount_and_ireason(ide_drive_t *, u16 *, u8 *);
-
-int ide_check_ireason(ide_drive_t *, struct request *, int, int, int);
-
-int ide_check_atapi_device(ide_drive_t *, const char *);
-
-void ide_init_pc(struct ide_atapi_pc *);
-
-/* Disk head parking */
-extern wait_queue_head_t ide_park_wq;
-ssize_t ide_park_show(struct device *dev, struct device_attribute *attr,
-		      char *buf);
-ssize_t ide_park_store(struct device *dev, struct device_attribute *attr,
-		       const char *buf, size_t len);
-
-/*
- * Special requests for ide-tape block device strategy routine.
- *
- * In order to service a character device command, we add special requests to
- * the tail of our block device request queue and wait for their completion.
- */
-enum {
-	REQ_IDETAPE_PC1		= (1 << 0), /* packet command (first stage) */
-	REQ_IDETAPE_PC2		= (1 << 1), /* packet command (second stage) */
-	REQ_IDETAPE_READ	= (1 << 2),
-	REQ_IDETAPE_WRITE	= (1 << 3),
-};
-
-int ide_queue_pc_tail(ide_drive_t *, struct gendisk *, struct ide_atapi_pc *,
-		      void *, unsigned int);
-
-int ide_do_test_unit_ready(ide_drive_t *, struct gendisk *);
-int ide_do_start_stop(ide_drive_t *, struct gendisk *, int);
-int ide_set_media_lock(ide_drive_t *, struct gendisk *, int);
-void ide_create_request_sense_cmd(ide_drive_t *, struct ide_atapi_pc *);
-void ide_retry_pc(ide_drive_t *drive);
-
-void ide_prep_sense(ide_drive_t *drive, struct request *rq);
-int ide_queue_sense_rq(ide_drive_t *drive, void *special);
-
-int ide_cd_expiry(ide_drive_t *);
-
-int ide_cd_get_xferlen(struct request *);
-
-ide_startstop_t ide_issue_pc(ide_drive_t *, struct ide_cmd *);
-
-ide_startstop_t do_rw_taskfile(ide_drive_t *, struct ide_cmd *);
-
-void ide_pio_bytes(ide_drive_t *, struct ide_cmd *, unsigned int, unsigned int);
-
-void ide_finish_cmd(ide_drive_t *, struct ide_cmd *, u8);
-
-int ide_raw_taskfile(ide_drive_t *, struct ide_cmd *, u8 *, u16);
-int ide_no_data_taskfile(ide_drive_t *, struct ide_cmd *);
-
-int ide_taskfile_ioctl(ide_drive_t *, unsigned long);
-
-int ide_dev_read_id(ide_drive_t *, u8, u16 *, int);
-
-extern int ide_driveid_update(ide_drive_t *);
-extern int ide_config_drive_speed(ide_drive_t *, u8);
-extern u8 eighty_ninty_three (ide_drive_t *);
-extern int taskfile_lib_get_identify(ide_drive_t *drive, u8 *);
-
-extern int ide_wait_not_busy(ide_hwif_t *hwif, unsigned long timeout);
-
-extern void ide_stall_queue(ide_drive_t *drive, unsigned long timeout);
-
-extern void ide_timer_expiry(unsigned long);
-extern irqreturn_t ide_intr(int irq, void *dev_id);
-extern void do_ide_request(struct request_queue *);
-extern void ide_requeue_and_plug(ide_drive_t *drive, struct request *rq);
-
-void ide_init_disk(struct gendisk *, ide_drive_t *);
-
-#ifdef CONFIG_IDEPCI_PCIBUS_ORDER
-extern int __ide_pci_register_driver(struct pci_driver *driver, struct module *owner, const char *mod_name);
-#define ide_pci_register_driver(d) __ide_pci_register_driver(d, THIS_MODULE, KBUILD_MODNAME)
-#else
-#define ide_pci_register_driver(d) pci_register_driver(d)
-#endif
-
-static inline int ide_pci_is_in_compatibility_mode(struct pci_dev *dev)
-{
-	if ((dev->class >> 8) == PCI_CLASS_STORAGE_IDE && (dev->class & 5) != 5)
-		return 1;
-	return 0;
-}
-
-void ide_pci_setup_ports(struct pci_dev *, const struct ide_port_info *,
-			 struct ide_hw *, struct ide_hw **);
-void ide_setup_pci_noise(struct pci_dev *, const struct ide_port_info *);
-
-#ifdef CONFIG_BLK_DEV_IDEDMA_PCI
-int ide_pci_set_master(struct pci_dev *, const char *);
-unsigned long ide_pci_dma_base(ide_hwif_t *, const struct ide_port_info *);
-int ide_pci_check_simplex(ide_hwif_t *, const struct ide_port_info *);
-int ide_hwif_setup_dma(ide_hwif_t *, const struct ide_port_info *);
-#else
-static inline int ide_hwif_setup_dma(ide_hwif_t *hwif,
-				     const struct ide_port_info *d)
-{
-	return -EINVAL;
-}
-#endif
-
-struct ide_pci_enablebit {
-	u8	reg;	/* byte pci reg holding the enable-bit */
-	u8	mask;	/* mask to isolate the enable-bit */
-	u8	val;	/* value of masked reg when "enabled" */
-};
-
-enum {
-	/* Uses ISA control ports not PCI ones. */
-	IDE_HFLAG_ISA_PORTS		= (1 << 0),
-	/* single port device */
-	IDE_HFLAG_SINGLE		= (1 << 1),
-	/* don't use legacy PIO blacklist */
-	IDE_HFLAG_PIO_NO_BLACKLIST	= (1 << 2),
-	/* set for the second port of QD65xx */
-	IDE_HFLAG_QD_2ND_PORT		= (1 << 3),
-	/* use PIO8/9 for prefetch off/on */
-	IDE_HFLAG_ABUSE_PREFETCH	= (1 << 4),
-	/* use PIO6/7 for fast-devsel off/on */
-	IDE_HFLAG_ABUSE_FAST_DEVSEL	= (1 << 5),
-	/* use 100-102 and 200-202 PIO values to set DMA modes */
-	IDE_HFLAG_ABUSE_DMA_MODES	= (1 << 6),
-	/*
-	 * keep DMA setting when programming PIO mode, may be used only
-	 * for hosts which have separate PIO and DMA timings (ie. PMAC)
-	 */
-	IDE_HFLAG_SET_PIO_MODE_KEEP_DMA	= (1 << 7),
-	/* program host for the transfer mode after programming device */
-	IDE_HFLAG_POST_SET_MODE		= (1 << 8),
-	/* don't program host/device for the transfer mode ("smart" hosts) */
-	IDE_HFLAG_NO_SET_MODE		= (1 << 9),
-	/* trust BIOS for programming chipset/device for DMA */
-	IDE_HFLAG_TRUST_BIOS_FOR_DMA	= (1 << 10),
-	/* host is CS5510/CS5520 */
-	IDE_HFLAG_CS5520		= (1 << 11),
-	/* ATAPI DMA is unsupported */
-	IDE_HFLAG_NO_ATAPI_DMA		= (1 << 12),
-	/* set if host is a "non-bootable" controller */
-	IDE_HFLAG_NON_BOOTABLE		= (1 << 13),
-	/* host doesn't support DMA */
-	IDE_HFLAG_NO_DMA		= (1 << 14),
-	/* check if host is PCI IDE device before allowing DMA */
-	IDE_HFLAG_NO_AUTODMA		= (1 << 15),
-	/* host uses MMIO */
-	IDE_HFLAG_MMIO			= (1 << 16),
-	/* no LBA48 */
-	IDE_HFLAG_NO_LBA48		= (1 << 17),
-	/* no LBA48 DMA */
-	IDE_HFLAG_NO_LBA48_DMA		= (1 << 18),
-	/* data FIFO is cleared by an error */
-	IDE_HFLAG_ERROR_STOPS_FIFO	= (1 << 19),
-	/* serialize ports */
-	IDE_HFLAG_SERIALIZE		= (1 << 20),
-	/* host is DTC2278 */
-	IDE_HFLAG_DTC2278		= (1 << 21),
-	/* 4 devices on a single set of I/O ports */
-	IDE_HFLAG_4DRIVES		= (1 << 22),
-	/* host is TRM290 */
-	IDE_HFLAG_TRM290		= (1 << 23),
-	/* use 32-bit I/O ops */
-	IDE_HFLAG_IO_32BIT		= (1 << 24),
-	/* unmask IRQs */
-	IDE_HFLAG_UNMASK_IRQS		= (1 << 25),
-	IDE_HFLAG_BROKEN_ALTSTATUS	= (1 << 26),
-	/* serialize ports if DMA is possible (for sl82c105) */
-	IDE_HFLAG_SERIALIZE_DMA		= (1 << 27),
-	/* force host out of "simplex" mode */
-	IDE_HFLAG_CLEAR_SIMPLEX		= (1 << 28),
-	/* DSC overlap is unsupported */
-	IDE_HFLAG_NO_DSC		= (1 << 29),
-	/* never use 32-bit I/O ops */
-	IDE_HFLAG_NO_IO_32BIT		= (1 << 30),
-	/* never unmask IRQs */
-	IDE_HFLAG_NO_UNMASK_IRQS	= (1 << 31),
-};
-
-#ifdef CONFIG_BLK_DEV_OFFBOARD
-# define IDE_HFLAG_OFF_BOARD	0
-#else
-# define IDE_HFLAG_OFF_BOARD	IDE_HFLAG_NON_BOOTABLE
-#endif
-
-struct ide_port_info {
-	char			*name;
-
-	int			(*init_chipset)(struct pci_dev *);
-
-	void			(*get_lock)(irq_handler_t, void *);
-	void			(*release_lock)(void);
-
-	void			(*init_iops)(ide_hwif_t *);
-	void                    (*init_hwif)(ide_hwif_t *);
-	int			(*init_dma)(ide_hwif_t *,
-					    const struct ide_port_info *);
-
-	const struct ide_tp_ops		*tp_ops;
-	const struct ide_port_ops	*port_ops;
-	const struct ide_dma_ops	*dma_ops;
-
-	struct ide_pci_enablebit	enablebits[2];
-
-	hwif_chipset_t		chipset;
-
-	u16			max_sectors;	/* if < than the default one */
-
-	u32			host_flags;
-
-	int			irq_flags;
-
-	u8			pio_mask;
-	u8			swdma_mask;
-	u8			mwdma_mask;
-	u8			udma_mask;
-};
-
-int ide_pci_init_one(struct pci_dev *, const struct ide_port_info *, void *);
-int ide_pci_init_two(struct pci_dev *, struct pci_dev *,
-		     const struct ide_port_info *, void *);
-void ide_pci_remove(struct pci_dev *);
-
-#ifdef CONFIG_PM
-int ide_pci_suspend(struct pci_dev *, pm_message_t);
-int ide_pci_resume(struct pci_dev *);
-#else
-#define ide_pci_suspend NULL
-#define ide_pci_resume NULL
-#endif
-
-void ide_map_sg(ide_drive_t *, struct ide_cmd *);
-void ide_init_sg_cmd(struct ide_cmd *, unsigned int);
-
-#define BAD_DMA_DRIVE		0
-#define GOOD_DMA_DRIVE		1
-
-struct drive_list_entry {
-	const char *id_model;
-	const char *id_firmware;
-};
-
-int ide_in_drive_list(u16 *, const struct drive_list_entry *);
-
-#ifdef CONFIG_BLK_DEV_IDEDMA
-int ide_dma_good_drive(ide_drive_t *);
-int __ide_dma_bad_drive(ide_drive_t *);
-
-u8 ide_find_dma_mode(ide_drive_t *, u8);
-
-static inline u8 ide_max_dma_mode(ide_drive_t *drive)
-{
-	return ide_find_dma_mode(drive, XFER_UDMA_6);
-}
-
-void ide_dma_off_quietly(ide_drive_t *);
-void ide_dma_off(ide_drive_t *);
-void ide_dma_on(ide_drive_t *);
-int ide_set_dma(ide_drive_t *);
-void ide_check_dma_crc(ide_drive_t *);
-ide_startstop_t ide_dma_intr(ide_drive_t *);
-
-int ide_allocate_dma_engine(ide_hwif_t *);
-void ide_release_dma_engine(ide_hwif_t *);
-
-int ide_dma_prepare(ide_drive_t *, struct ide_cmd *);
-void ide_dma_unmap_sg(ide_drive_t *, struct ide_cmd *);
-
-#ifdef CONFIG_BLK_DEV_IDEDMA_SFF
-int config_drive_for_dma(ide_drive_t *);
-int ide_build_dmatable(ide_drive_t *, struct ide_cmd *);
-void ide_dma_host_set(ide_drive_t *, int);
-int ide_dma_setup(ide_drive_t *, struct ide_cmd *);
-extern void ide_dma_start(ide_drive_t *);
-int ide_dma_end(ide_drive_t *);
-int ide_dma_test_irq(ide_drive_t *);
-int ide_dma_sff_timer_expiry(ide_drive_t *);
-u8 ide_dma_sff_read_status(ide_hwif_t *);
-extern const struct ide_dma_ops sff_dma_ops;
-#else
-static inline int config_drive_for_dma(ide_drive_t *drive) { return 0; }
-#endif /* CONFIG_BLK_DEV_IDEDMA_SFF */
-
-void ide_dma_lost_irq(ide_drive_t *);
-ide_startstop_t ide_dma_timeout_retry(ide_drive_t *, int);
-
-#else
-static inline u8 ide_find_dma_mode(ide_drive_t *drive, u8 speed) { return 0; }
-static inline u8 ide_max_dma_mode(ide_drive_t *drive) { return 0; }
-static inline void ide_dma_off_quietly(ide_drive_t *drive) { ; }
-static inline void ide_dma_off(ide_drive_t *drive) { ; }
-static inline void ide_dma_on(ide_drive_t *drive) { ; }
-static inline void ide_dma_verbose(ide_drive_t *drive) { ; }
-static inline int ide_set_dma(ide_drive_t *drive) { return 1; }
-static inline void ide_check_dma_crc(ide_drive_t *drive) { ; }
-static inline ide_startstop_t ide_dma_intr(ide_drive_t *drive) { return ide_stopped; }
-static inline ide_startstop_t ide_dma_timeout_retry(ide_drive_t *drive, int error) { return ide_stopped; }
-static inline void ide_release_dma_engine(ide_hwif_t *hwif) { ; }
-static inline int ide_dma_prepare(ide_drive_t *drive,
-				  struct ide_cmd *cmd) { return 1; }
-static inline void ide_dma_unmap_sg(ide_drive_t *drive,
-				    struct ide_cmd *cmd) { ; }
-#endif /* CONFIG_BLK_DEV_IDEDMA */
-
-#ifdef CONFIG_BLK_DEV_IDEACPI
-int ide_acpi_init(void);
-bool ide_port_acpi(ide_hwif_t *hwif);
-extern int ide_acpi_exec_tfs(ide_drive_t *drive);
-extern void ide_acpi_get_timing(ide_hwif_t *hwif);
-extern void ide_acpi_push_timing(ide_hwif_t *hwif);
-void ide_acpi_init_port(ide_hwif_t *);
-void ide_acpi_port_init_devices(ide_hwif_t *);
-extern void ide_acpi_set_state(ide_hwif_t *hwif, int on);
-#else
-static inline int ide_acpi_init(void) { return 0; }
-static inline bool ide_port_acpi(ide_hwif_t *hwif) { return 0; }
-static inline int ide_acpi_exec_tfs(ide_drive_t *drive) { return 0; }
-static inline void ide_acpi_get_timing(ide_hwif_t *hwif) { ; }
-static inline void ide_acpi_push_timing(ide_hwif_t *hwif) { ; }
-static inline void ide_acpi_init_port(ide_hwif_t *hwif) { ; }
-static inline void ide_acpi_port_init_devices(ide_hwif_t *hwif) { ; }
-static inline void ide_acpi_set_state(ide_hwif_t *hwif, int on) {}
-#endif
-
-void ide_register_region(struct gendisk *);
-void ide_unregister_region(struct gendisk *);
-
-void ide_check_nien_quirk_list(ide_drive_t *);
-void ide_undecoded_slave(ide_drive_t *);
-
-void ide_port_apply_params(ide_hwif_t *);
-int ide_sysfs_register_port(ide_hwif_t *);
-
-struct ide_host *ide_host_alloc(const struct ide_port_info *, struct ide_hw **,
-				unsigned int);
-void ide_host_free(struct ide_host *);
-int ide_host_register(struct ide_host *, const struct ide_port_info *,
-		      struct ide_hw **);
-int ide_host_add(const struct ide_port_info *, struct ide_hw **, unsigned int,
-		 struct ide_host **);
-void ide_host_remove(struct ide_host *);
-int ide_legacy_device_add(const struct ide_port_info *, unsigned long);
-void ide_port_unregister_devices(ide_hwif_t *);
-void ide_port_scan(ide_hwif_t *);
-
-static inline void *ide_get_hwifdata (ide_hwif_t * hwif)
-{
-	return hwif->hwif_data;
-}
-
-static inline void ide_set_hwifdata (ide_hwif_t * hwif, void *data)
-{
-	hwif->hwif_data = data;
-}
-
-extern void ide_toggle_bounce(ide_drive_t *drive, int on);
-
-u64 ide_get_lba_addr(struct ide_cmd *, int);
-u8 ide_dump_status(ide_drive_t *, const char *, u8);
-
-struct ide_timing {
-	u8  mode;
-	u8  setup;	/* t1 */
-	u16 act8b;	/* t2 for 8-bit io */
-	u16 rec8b;	/* t2i for 8-bit io */
-	u16 cyc8b;	/* t0 for 8-bit io */
-	u16 active;	/* t2 or tD */
-	u16 recover;	/* t2i or tK */
-	u16 cycle;	/* t0 */
-	u16 udma;	/* t2CYCTYP/2 */
-};
-
-enum {
-	IDE_TIMING_SETUP	= (1 << 0),
-	IDE_TIMING_ACT8B	= (1 << 1),
-	IDE_TIMING_REC8B	= (1 << 2),
-	IDE_TIMING_CYC8B	= (1 << 3),
-	IDE_TIMING_8BIT		= IDE_TIMING_ACT8B | IDE_TIMING_REC8B |
-				  IDE_TIMING_CYC8B,
-	IDE_TIMING_ACTIVE	= (1 << 4),
-	IDE_TIMING_RECOVER	= (1 << 5),
-	IDE_TIMING_CYCLE	= (1 << 6),
-	IDE_TIMING_UDMA		= (1 << 7),
-	IDE_TIMING_ALL		= IDE_TIMING_SETUP | IDE_TIMING_8BIT |
-				  IDE_TIMING_ACTIVE | IDE_TIMING_RECOVER |
-				  IDE_TIMING_CYCLE | IDE_TIMING_UDMA,
-};
-
-struct ide_timing *ide_timing_find_mode(u8);
-u16 ide_pio_cycle_time(ide_drive_t *, u8);
-void ide_timing_merge(struct ide_timing *, struct ide_timing *,
-		      struct ide_timing *, unsigned int);
-int ide_timing_compute(ide_drive_t *, u8, struct ide_timing *, int, int);
-
-#ifdef CONFIG_IDE_XFER_MODE
-int ide_scan_pio_blacklist(char *);
-const char *ide_xfer_verbose(u8);
-int ide_pio_need_iordy(ide_drive_t *, const u8);
-int ide_set_pio_mode(ide_drive_t *, u8);
-int ide_set_dma_mode(ide_drive_t *, u8);
-void ide_set_pio(ide_drive_t *, u8);
-int ide_set_xfer_rate(ide_drive_t *, u8);
-#else
-static inline void ide_set_pio(ide_drive_t *drive, u8 pio) { ; }
-static inline int ide_set_xfer_rate(ide_drive_t *drive, u8 rate) { return -1; }
-#endif
-
-static inline void ide_set_max_pio(ide_drive_t *drive)
-{
-	ide_set_pio(drive, 255);
-}
-
-char *ide_media_string(ide_drive_t *);
-
-extern struct device_attribute ide_dev_attrs[];
-extern struct bus_type ide_bus_type;
-extern struct class *ide_port_class;
-
-static inline void ide_dump_identify(u8 *id)
-{
-	print_hex_dump(KERN_INFO, "", DUMP_PREFIX_NONE, 16, 2, id, 512, 0);
-}
-
-static inline int hwif_to_node(ide_hwif_t *hwif)
-{
-	return hwif->dev ? dev_to_node(hwif->dev) : -1;
-}
-
-static inline ide_drive_t *ide_get_pair_dev(ide_drive_t *drive)
-{
-	ide_drive_t *peer = drive->hwif->devices[(drive->dn ^ 1) & 1];
-
-	return (peer->dev_flags & IDE_DFLAG_PRESENT) ? peer : NULL;
-}
-
-static inline void *ide_get_drivedata(ide_drive_t *drive)
-{
-	return drive->drive_data;
-}
-
-static inline void ide_set_drivedata(ide_drive_t *drive, void *data)
-{
-	drive->drive_data = data;
-}
-
-#define ide_port_for_each_dev(i, dev, port) \
-	for ((i) = 0; ((dev) = (port)->devices[i]) || (i) < MAX_DRIVES; (i)++)
-
-#define ide_port_for_each_present_dev(i, dev, port) \
-	for ((i) = 0; ((dev) = (port)->devices[i]) || (i) < MAX_DRIVES; (i)++) \
-		if ((dev)->dev_flags & IDE_DFLAG_PRESENT)
-
-#define ide_host_for_each_port(i, port, host) \
-	for ((i) = 0; ((port) = (host)->ports[i]) || (i) < MAX_HOST_PORTS; (i)++)
-
-#endif /* _IDE_H */
diff --git a/ANDROID_3.4.5/include/linux/idr.h b/ANDROID_3.4.5/include/linux/idr.h
deleted file mode 100644
index 255491cf..00000000
--- a/ANDROID_3.4.5/include/linux/idr.h
+++ /dev/null
@@ -1,155 +0,0 @@
-/*
- * include/linux/idr.h
- * 
- * 2002-10-18  written by Jim Houston jim.houston@ccur.com
- *	Copyright (C) 2002 by Concurrent Computer Corporation
- *	Distributed under the GNU GPL license version 2.
- *
- * Small id to pointer translation service avoiding fixed sized
- * tables.
- */
-
-#ifndef __IDR_H__
-#define __IDR_H__
-
-#include <linux/types.h>
-#include <linux/bitops.h>
-#include <linux/init.h>
-#include <linux/rcupdate.h>
-
-#if BITS_PER_LONG == 32
-# define IDR_BITS 5
-# define IDR_FULL 0xfffffffful
-/* We can only use two of the bits in the top level because there is
-   only one possible bit in the top level (5 bits * 7 levels = 35
-   bits, but you only use 31 bits in the id). */
-# define TOP_LEVEL_FULL (IDR_FULL >> 30)
-#elif BITS_PER_LONG == 64
-# define IDR_BITS 6
-# define IDR_FULL 0xfffffffffffffffful
-/* We can only use two of the bits in the top level because there is
-   only one possible bit in the top level (6 bits * 6 levels = 36
-   bits, but you only use 31 bits in the id). */
-# define TOP_LEVEL_FULL (IDR_FULL >> 62)
-#else
-# error "BITS_PER_LONG is not 32 or 64"
-#endif
-
-#define IDR_SIZE (1 << IDR_BITS)
-#define IDR_MASK ((1 << IDR_BITS)-1)
-
-#define MAX_ID_SHIFT (sizeof(int)*8 - 1)
-#define MAX_ID_BIT (1U << MAX_ID_SHIFT)
-#define MAX_ID_MASK (MAX_ID_BIT - 1)
-
-/* Leave the possibility of an incomplete final layer */
-#define MAX_LEVEL (MAX_ID_SHIFT + IDR_BITS - 1) / IDR_BITS
-
-/* Number of id_layer structs to leave in free list */
-#define IDR_FREE_MAX MAX_LEVEL + MAX_LEVEL
-
-struct idr_layer {
-	unsigned long		 bitmap; /* A zero bit means "space here" */
-	struct idr_layer __rcu	*ary[1<<IDR_BITS];
-	int			 count;	 /* When zero, we can release it */
-	int			 layer;	 /* distance from leaf */
-	struct rcu_head		 rcu_head;
-};
-
-struct idr {
-	struct idr_layer __rcu *top;
-	struct idr_layer *id_free;
-	int		  layers; /* only valid without concurrent changes */
-	int		  id_free_cnt;
-	spinlock_t	  lock;
-};
-
-#define IDR_INIT(name)						\
-{								\
-	.top		= NULL,					\
-	.id_free	= NULL,					\
-	.layers 	= 0,					\
-	.id_free_cnt	= 0,					\
-	.lock		= __SPIN_LOCK_UNLOCKED(name.lock),	\
-}
-#define DEFINE_IDR(name)	struct idr name = IDR_INIT(name)
-
-/* Actions to be taken after a call to _idr_sub_alloc */
-#define IDR_NEED_TO_GROW -2
-#define IDR_NOMORE_SPACE -3
-
-#define _idr_rc_to_errno(rc) ((rc) == -1 ? -EAGAIN : -ENOSPC)
-
-/**
- * DOC: idr sync
- * idr synchronization (stolen from radix-tree.h)
- *
- * idr_find() is able to be called locklessly, using RCU. The caller must
- * ensure calls to this function are made within rcu_read_lock() regions.
- * Other readers (lock-free or otherwise) and modifications may be running
- * concurrently.
- *
- * It is still required that the caller manage the synchronization and
- * lifetimes of the items. So if RCU lock-free lookups are used, typically
- * this would mean that the items have their own locks, or are amenable to
- * lock-free access; and that the items are freed by RCU (or only freed after
- * having been deleted from the idr tree *and* a synchronize_rcu() grace
- * period).
- */
-
-/*
- * This is what we export.
- */
-
-void *idr_find(struct idr *idp, int id);
-int idr_pre_get(struct idr *idp, gfp_t gfp_mask);
-int idr_get_new(struct idr *idp, void *ptr, int *id);
-int idr_get_new_above(struct idr *idp, void *ptr, int starting_id, int *id);
-int idr_for_each(struct idr *idp,
-		 int (*fn)(int id, void *p, void *data), void *data);
-void *idr_get_next(struct idr *idp, int *nextid);
-void *idr_replace(struct idr *idp, void *ptr, int id);
-void idr_remove(struct idr *idp, int id);
-void idr_remove_all(struct idr *idp);
-void idr_destroy(struct idr *idp);
-void idr_init(struct idr *idp);
-
-
-/*
- * IDA - IDR based id allocator, use when translation from id to
- * pointer isn't necessary.
- *
- * IDA_BITMAP_LONGS is calculated to be one less to accommodate
- * ida_bitmap->nr_busy so that the whole struct fits in 128 bytes.
- */
-#define IDA_CHUNK_SIZE		128	/* 128 bytes per chunk */
-#define IDA_BITMAP_LONGS	(IDA_CHUNK_SIZE / sizeof(long) - 1)
-#define IDA_BITMAP_BITS 	(IDA_BITMAP_LONGS * sizeof(long) * 8)
-
-struct ida_bitmap {
-	long			nr_busy;
-	unsigned long		bitmap[IDA_BITMAP_LONGS];
-};
-
-struct ida {
-	struct idr		idr;
-	struct ida_bitmap	*free_bitmap;
-};
-
-#define IDA_INIT(name)		{ .idr = IDR_INIT(name), .free_bitmap = NULL, }
-#define DEFINE_IDA(name)	struct ida name = IDA_INIT(name)
-
-int ida_pre_get(struct ida *ida, gfp_t gfp_mask);
-int ida_get_new_above(struct ida *ida, int starting_id, int *p_id);
-int ida_get_new(struct ida *ida, int *p_id);
-void ida_remove(struct ida *ida, int id);
-void ida_destroy(struct ida *ida);
-void ida_init(struct ida *ida);
-
-int ida_simple_get(struct ida *ida, unsigned int start, unsigned int end,
-		   gfp_t gfp_mask);
-void ida_simple_remove(struct ida *ida, unsigned int id);
-
-void __init idr_init_cache(void);
-
-#endif /* __IDR_H__ */
diff --git a/ANDROID_3.4.5/include/linux/ieee80211.h b/ANDROID_3.4.5/include/linux/ieee80211.h
deleted file mode 100644
index 210e2c32..00000000
--- a/ANDROID_3.4.5/include/linux/ieee80211.h
+++ /dev/null
@@ -1,1878 +0,0 @@
-/*
- * IEEE 802.11 defines
- *
- * Copyright (c) 2001-2002, SSH Communications Security Corp and Jouni Malinen
- * <jkmaline@cc.hut.fi>
- * Copyright (c) 2002-2003, Jouni Malinen <jkmaline@cc.hut.fi>
- * Copyright (c) 2005, Devicescape Software, Inc.
- * Copyright (c) 2006, Michael Wu <flamingice@sourmilk.net>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef LINUX_IEEE80211_H
-#define LINUX_IEEE80211_H
-
-#include <linux/types.h>
-#include <asm/byteorder.h>
-
-/*
- * DS bit usage
- *
- * TA = transmitter address
- * RA = receiver address
- * DA = destination address
- * SA = source address
- *
- * ToDS    FromDS  A1(RA)  A2(TA)  A3      A4      Use
- * -----------------------------------------------------------------
- *  0       0       DA      SA      BSSID   -       IBSS/DLS
- *  0       1       DA      BSSID   SA      -       AP -> STA
- *  1       0       BSSID   SA      DA      -       AP <- STA
- *  1       1       RA      TA      DA      SA      unspecified (WDS)
- */
-
-#define FCS_LEN 4
-
-#define IEEE80211_FCTL_VERS		0x0003
-#define IEEE80211_FCTL_FTYPE		0x000c
-#define IEEE80211_FCTL_STYPE		0x00f0
-#define IEEE80211_FCTL_TODS		0x0100
-#define IEEE80211_FCTL_FROMDS		0x0200
-#define IEEE80211_FCTL_MOREFRAGS	0x0400
-#define IEEE80211_FCTL_RETRY		0x0800
-#define IEEE80211_FCTL_PM		0x1000
-#define IEEE80211_FCTL_MOREDATA		0x2000
-#define IEEE80211_FCTL_PROTECTED	0x4000
-#define IEEE80211_FCTL_ORDER		0x8000
-
-#define IEEE80211_SCTL_FRAG		0x000F
-#define IEEE80211_SCTL_SEQ		0xFFF0
-
-#define IEEE80211_FTYPE_MGMT		0x0000
-#define IEEE80211_FTYPE_CTL		0x0004
-#define IEEE80211_FTYPE_DATA		0x0008
-
-/* management */
-#define IEEE80211_STYPE_ASSOC_REQ	0x0000
-#define IEEE80211_STYPE_ASSOC_RESP	0x0010
-#define IEEE80211_STYPE_REASSOC_REQ	0x0020
-#define IEEE80211_STYPE_REASSOC_RESP	0x0030
-#define IEEE80211_STYPE_PROBE_REQ	0x0040
-#define IEEE80211_STYPE_PROBE_RESP	0x0050
-#define IEEE80211_STYPE_BEACON		0x0080
-#define IEEE80211_STYPE_ATIM		0x0090
-#define IEEE80211_STYPE_DISASSOC	0x00A0
-#define IEEE80211_STYPE_AUTH		0x00B0
-#define IEEE80211_STYPE_DEAUTH		0x00C0
-#define IEEE80211_STYPE_ACTION		0x00D0
-
-/* control */
-#define IEEE80211_STYPE_BACK_REQ	0x0080
-#define IEEE80211_STYPE_BACK		0x0090
-#define IEEE80211_STYPE_PSPOLL		0x00A0
-#define IEEE80211_STYPE_RTS		0x00B0
-#define IEEE80211_STYPE_CTS		0x00C0
-#define IEEE80211_STYPE_ACK		0x00D0
-#define IEEE80211_STYPE_CFEND		0x00E0
-#define IEEE80211_STYPE_CFENDACK	0x00F0
-
-/* data */
-#define IEEE80211_STYPE_DATA			0x0000
-#define IEEE80211_STYPE_DATA_CFACK		0x0010
-#define IEEE80211_STYPE_DATA_CFPOLL		0x0020
-#define IEEE80211_STYPE_DATA_CFACKPOLL		0x0030
-#define IEEE80211_STYPE_NULLFUNC		0x0040
-#define IEEE80211_STYPE_CFACK			0x0050
-#define IEEE80211_STYPE_CFPOLL			0x0060
-#define IEEE80211_STYPE_CFACKPOLL		0x0070
-#define IEEE80211_STYPE_QOS_DATA		0x0080
-#define IEEE80211_STYPE_QOS_DATA_CFACK		0x0090
-#define IEEE80211_STYPE_QOS_DATA_CFPOLL		0x00A0
-#define IEEE80211_STYPE_QOS_DATA_CFACKPOLL	0x00B0
-#define IEEE80211_STYPE_QOS_NULLFUNC		0x00C0
-#define IEEE80211_STYPE_QOS_CFACK		0x00D0
-#define IEEE80211_STYPE_QOS_CFPOLL		0x00E0
-#define IEEE80211_STYPE_QOS_CFACKPOLL		0x00F0
-
-
-/* miscellaneous IEEE 802.11 constants */
-#define IEEE80211_MAX_FRAG_THRESHOLD	2352
-#define IEEE80211_MAX_RTS_THRESHOLD	2353
-#define IEEE80211_MAX_AID		2007
-#define IEEE80211_MAX_TIM_LEN		251
-/* Maximum size for the MA-UNITDATA primitive, 802.11 standard section
-   6.2.1.1.2.
-
-   802.11e clarifies the figure in section 7.1.2. The frame body is
-   up to 2304 octets long (maximum MSDU size) plus any crypt overhead. */
-#define IEEE80211_MAX_DATA_LEN		2304
-/* 30 byte 4 addr hdr, 2 byte QoS, 2304 byte MSDU, 12 byte crypt, 4 byte FCS */
-#define IEEE80211_MAX_FRAME_LEN		2352
-
-#define IEEE80211_MAX_SSID_LEN		32
-
-#define IEEE80211_MAX_MESH_ID_LEN	32
-
-#define IEEE80211_QOS_CTL_LEN		2
-/* 1d tag mask */
-#define IEEE80211_QOS_CTL_TAG1D_MASK		0x0007
-/* TID mask */
-#define IEEE80211_QOS_CTL_TID_MASK		0x000f
-/* EOSP */
-#define IEEE80211_QOS_CTL_EOSP			0x0010
-/* ACK policy */
-#define IEEE80211_QOS_CTL_ACK_POLICY_NORMAL	0x0000
-#define IEEE80211_QOS_CTL_ACK_POLICY_NOACK	0x0020
-#define IEEE80211_QOS_CTL_ACK_POLICY_NO_EXPL	0x0040
-#define IEEE80211_QOS_CTL_ACK_POLICY_BLOCKACK	0x0060
-#define IEEE80211_QOS_CTL_ACK_POLICY_MASK	0x0060
-/* A-MSDU 802.11n */
-#define IEEE80211_QOS_CTL_A_MSDU_PRESENT	0x0080
-/* Mesh Control 802.11s */
-#define IEEE80211_QOS_CTL_MESH_CONTROL_PRESENT  0x0100
-
-/* U-APSD queue for WMM IEs sent by AP */
-#define IEEE80211_WMM_IE_AP_QOSINFO_UAPSD	(1<<7)
-#define IEEE80211_WMM_IE_AP_QOSINFO_PARAM_SET_CNT_MASK	0x0f
-
-/* U-APSD queues for WMM IEs sent by STA */
-#define IEEE80211_WMM_IE_STA_QOSINFO_AC_VO	(1<<0)
-#define IEEE80211_WMM_IE_STA_QOSINFO_AC_VI	(1<<1)
-#define IEEE80211_WMM_IE_STA_QOSINFO_AC_BK	(1<<2)
-#define IEEE80211_WMM_IE_STA_QOSINFO_AC_BE	(1<<3)
-#define IEEE80211_WMM_IE_STA_QOSINFO_AC_MASK	0x0f
-
-/* U-APSD max SP length for WMM IEs sent by STA */
-#define IEEE80211_WMM_IE_STA_QOSINFO_SP_ALL	0x00
-#define IEEE80211_WMM_IE_STA_QOSINFO_SP_2	0x01
-#define IEEE80211_WMM_IE_STA_QOSINFO_SP_4	0x02
-#define IEEE80211_WMM_IE_STA_QOSINFO_SP_6	0x03
-#define IEEE80211_WMM_IE_STA_QOSINFO_SP_MASK	0x03
-#define IEEE80211_WMM_IE_STA_QOSINFO_SP_SHIFT	5
-
-#define IEEE80211_HT_CTL_LEN		4
-
-struct ieee80211_hdr {
-	__le16 frame_control;
-	__le16 duration_id;
-	u8 addr1[6];
-	u8 addr2[6];
-	u8 addr3[6];
-	__le16 seq_ctrl;
-	u8 addr4[6];
-} __attribute__ ((packed));
-
-struct ieee80211_hdr_3addr {
-	__le16 frame_control;
-	__le16 duration_id;
-	u8 addr1[6];
-	u8 addr2[6];
-	u8 addr3[6];
-	__le16 seq_ctrl;
-} __attribute__ ((packed));
-
-struct ieee80211_qos_hdr {
-	__le16 frame_control;
-	__le16 duration_id;
-	u8 addr1[6];
-	u8 addr2[6];
-	u8 addr3[6];
-	__le16 seq_ctrl;
-	__le16 qos_ctrl;
-} __attribute__ ((packed));
-
-/**
- * ieee80211_has_tods - check if IEEE80211_FCTL_TODS is set
- * @fc: frame control bytes in little-endian byteorder
- */
-static inline int ieee80211_has_tods(__le16 fc)
-{
-	return (fc & cpu_to_le16(IEEE80211_FCTL_TODS)) != 0;
-}
-
-/**
- * ieee80211_has_fromds - check if IEEE80211_FCTL_FROMDS is set
- * @fc: frame control bytes in little-endian byteorder
- */
-static inline int ieee80211_has_fromds(__le16 fc)
-{
-	return (fc & cpu_to_le16(IEEE80211_FCTL_FROMDS)) != 0;
-}
-
-/**
- * ieee80211_has_a4 - check if IEEE80211_FCTL_TODS and IEEE80211_FCTL_FROMDS are set
- * @fc: frame control bytes in little-endian byteorder
- */
-static inline int ieee80211_has_a4(__le16 fc)
-{
-	__le16 tmp = cpu_to_le16(IEEE80211_FCTL_TODS | IEEE80211_FCTL_FROMDS);
-	return (fc & tmp) == tmp;
-}
-
-/**
- * ieee80211_has_morefrags - check if IEEE80211_FCTL_MOREFRAGS is set
- * @fc: frame control bytes in little-endian byteorder
- */
-static inline int ieee80211_has_morefrags(__le16 fc)
-{
-	return (fc & cpu_to_le16(IEEE80211_FCTL_MOREFRAGS)) != 0;
-}
-
-/**
- * ieee80211_has_retry - check if IEEE80211_FCTL_RETRY is set
- * @fc: frame control bytes in little-endian byteorder
- */
-static inline int ieee80211_has_retry(__le16 fc)
-{
-	return (fc & cpu_to_le16(IEEE80211_FCTL_RETRY)) != 0;
-}
-
-/**
- * ieee80211_has_pm - check if IEEE80211_FCTL_PM is set
- * @fc: frame control bytes in little-endian byteorder
- */
-static inline int ieee80211_has_pm(__le16 fc)
-{
-	return (fc & cpu_to_le16(IEEE80211_FCTL_PM)) != 0;
-}
-
-/**
- * ieee80211_has_moredata - check if IEEE80211_FCTL_MOREDATA is set
- * @fc: frame control bytes in little-endian byteorder
- */
-static inline int ieee80211_has_moredata(__le16 fc)
-{
-	return (fc & cpu_to_le16(IEEE80211_FCTL_MOREDATA)) != 0;
-}
-
-/**
- * ieee80211_has_protected - check if IEEE80211_FCTL_PROTECTED is set
- * @fc: frame control bytes in little-endian byteorder
- */
-static inline int ieee80211_has_protected(__le16 fc)
-{
-	return (fc & cpu_to_le16(IEEE80211_FCTL_PROTECTED)) != 0;
-}
-
-/**
- * ieee80211_has_order - check if IEEE80211_FCTL_ORDER is set
- * @fc: frame control bytes in little-endian byteorder
- */
-static inline int ieee80211_has_order(__le16 fc)
-{
-	return (fc & cpu_to_le16(IEEE80211_FCTL_ORDER)) != 0;
-}
-
-/**
- * ieee80211_is_mgmt - check if type is IEEE80211_FTYPE_MGMT
- * @fc: frame control bytes in little-endian byteorder
- */
-static inline int ieee80211_is_mgmt(__le16 fc)
-{
-	return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE)) ==
-	       cpu_to_le16(IEEE80211_FTYPE_MGMT);
-}
-
-/**
- * ieee80211_is_ctl - check if type is IEEE80211_FTYPE_CTL
- * @fc: frame control bytes in little-endian byteorder
- */
-static inline int ieee80211_is_ctl(__le16 fc)
-{
-	return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE)) ==
-	       cpu_to_le16(IEEE80211_FTYPE_CTL);
-}
-
-/**
- * ieee80211_is_data - check if type is IEEE80211_FTYPE_DATA
- * @fc: frame control bytes in little-endian byteorder
- */
-static inline int ieee80211_is_data(__le16 fc)
-{
-	return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE)) ==
-	       cpu_to_le16(IEEE80211_FTYPE_DATA);
-}
-
-/**
- * ieee80211_is_data_qos - check if type is IEEE80211_FTYPE_DATA and IEEE80211_STYPE_QOS_DATA is set
- * @fc: frame control bytes in little-endian byteorder
- */
-static inline int ieee80211_is_data_qos(__le16 fc)
-{
-	/*
-	 * mask with QOS_DATA rather than IEEE80211_FCTL_STYPE as we just need
-	 * to check the one bit
-	 */
-	return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_STYPE_QOS_DATA)) ==
-	       cpu_to_le16(IEEE80211_FTYPE_DATA | IEEE80211_STYPE_QOS_DATA);
-}
-
-/**
- * ieee80211_is_data_present - check if type is IEEE80211_FTYPE_DATA and has data
- * @fc: frame control bytes in little-endian byteorder
- */
-static inline int ieee80211_is_data_present(__le16 fc)
-{
-	/*
-	 * mask with 0x40 and test that that bit is clear to only return true
-	 * for the data-containing substypes.
-	 */
-	return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | 0x40)) ==
-	       cpu_to_le16(IEEE80211_FTYPE_DATA);
-}
-
-/**
- * ieee80211_is_assoc_req - check if IEEE80211_FTYPE_MGMT && IEEE80211_STYPE_ASSOC_REQ
- * @fc: frame control bytes in little-endian byteorder
- */
-static inline int ieee80211_is_assoc_req(__le16 fc)
-{
-	return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) ==
-	       cpu_to_le16(IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_ASSOC_REQ);
-}
-
-/**
- * ieee80211_is_assoc_resp - check if IEEE80211_FTYPE_MGMT && IEEE80211_STYPE_ASSOC_RESP
- * @fc: frame control bytes in little-endian byteorder
- */
-static inline int ieee80211_is_assoc_resp(__le16 fc)
-{
-	return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) ==
-	       cpu_to_le16(IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_ASSOC_RESP);
-}
-
-/**
- * ieee80211_is_reassoc_req - check if IEEE80211_FTYPE_MGMT && IEEE80211_STYPE_REASSOC_REQ
- * @fc: frame control bytes in little-endian byteorder
- */
-static inline int ieee80211_is_reassoc_req(__le16 fc)
-{
-	return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) ==
-	       cpu_to_le16(IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_REASSOC_REQ);
-}
-
-/**
- * ieee80211_is_reassoc_resp - check if IEEE80211_FTYPE_MGMT && IEEE80211_STYPE_REASSOC_RESP
- * @fc: frame control bytes in little-endian byteorder
- */
-static inline int ieee80211_is_reassoc_resp(__le16 fc)
-{
-	return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) ==
-	       cpu_to_le16(IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_REASSOC_RESP);
-}
-
-/**
- * ieee80211_is_probe_req - check if IEEE80211_FTYPE_MGMT && IEEE80211_STYPE_PROBE_REQ
- * @fc: frame control bytes in little-endian byteorder
- */
-static inline int ieee80211_is_probe_req(__le16 fc)
-{
-	return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) ==
-	       cpu_to_le16(IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_PROBE_REQ);
-}
-
-/**
- * ieee80211_is_probe_resp - check if IEEE80211_FTYPE_MGMT && IEEE80211_STYPE_PROBE_RESP
- * @fc: frame control bytes in little-endian byteorder
- */
-static inline int ieee80211_is_probe_resp(__le16 fc)
-{
-	return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) ==
-	       cpu_to_le16(IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_PROBE_RESP);
-}
-
-/**
- * ieee80211_is_beacon - check if IEEE80211_FTYPE_MGMT && IEEE80211_STYPE_BEACON
- * @fc: frame control bytes in little-endian byteorder
- */
-static inline int ieee80211_is_beacon(__le16 fc)
-{
-	return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) ==
-	       cpu_to_le16(IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_BEACON);
-}
-
-/**
- * ieee80211_is_atim - check if IEEE80211_FTYPE_MGMT && IEEE80211_STYPE_ATIM
- * @fc: frame control bytes in little-endian byteorder
- */
-static inline int ieee80211_is_atim(__le16 fc)
-{
-	return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) ==
-	       cpu_to_le16(IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_ATIM);
-}
-
-/**
- * ieee80211_is_disassoc - check if IEEE80211_FTYPE_MGMT && IEEE80211_STYPE_DISASSOC
- * @fc: frame control bytes in little-endian byteorder
- */
-static inline int ieee80211_is_disassoc(__le16 fc)
-{
-	return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) ==
-	       cpu_to_le16(IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_DISASSOC);
-}
-
-/**
- * ieee80211_is_auth - check if IEEE80211_FTYPE_MGMT && IEEE80211_STYPE_AUTH
- * @fc: frame control bytes in little-endian byteorder
- */
-static inline int ieee80211_is_auth(__le16 fc)
-{
-	return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) ==
-	       cpu_to_le16(IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_AUTH);
-}
-
-/**
- * ieee80211_is_deauth - check if IEEE80211_FTYPE_MGMT && IEEE80211_STYPE_DEAUTH
- * @fc: frame control bytes in little-endian byteorder
- */
-static inline int ieee80211_is_deauth(__le16 fc)
-{
-	return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) ==
-	       cpu_to_le16(IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_DEAUTH);
-}
-
-/**
- * ieee80211_is_action - check if IEEE80211_FTYPE_MGMT && IEEE80211_STYPE_ACTION
- * @fc: frame control bytes in little-endian byteorder
- */
-static inline int ieee80211_is_action(__le16 fc)
-{
-	return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) ==
-	       cpu_to_le16(IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_ACTION);
-}
-
-/**
- * ieee80211_is_back_req - check if IEEE80211_FTYPE_CTL && IEEE80211_STYPE_BACK_REQ
- * @fc: frame control bytes in little-endian byteorder
- */
-static inline int ieee80211_is_back_req(__le16 fc)
-{
-	return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) ==
-	       cpu_to_le16(IEEE80211_FTYPE_CTL | IEEE80211_STYPE_BACK_REQ);
-}
-
-/**
- * ieee80211_is_back - check if IEEE80211_FTYPE_CTL && IEEE80211_STYPE_BACK
- * @fc: frame control bytes in little-endian byteorder
- */
-static inline int ieee80211_is_back(__le16 fc)
-{
-	return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) ==
-	       cpu_to_le16(IEEE80211_FTYPE_CTL | IEEE80211_STYPE_BACK);
-}
-
-/**
- * ieee80211_is_pspoll - check if IEEE80211_FTYPE_CTL && IEEE80211_STYPE_PSPOLL
- * @fc: frame control bytes in little-endian byteorder
- */
-static inline int ieee80211_is_pspoll(__le16 fc)
-{
-	return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) ==
-	       cpu_to_le16(IEEE80211_FTYPE_CTL | IEEE80211_STYPE_PSPOLL);
-}
-
-/**
- * ieee80211_is_rts - check if IEEE80211_FTYPE_CTL && IEEE80211_STYPE_RTS
- * @fc: frame control bytes in little-endian byteorder
- */
-static inline int ieee80211_is_rts(__le16 fc)
-{
-	return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) ==
-	       cpu_to_le16(IEEE80211_FTYPE_CTL | IEEE80211_STYPE_RTS);
-}
-
-/**
- * ieee80211_is_cts - check if IEEE80211_FTYPE_CTL && IEEE80211_STYPE_CTS
- * @fc: frame control bytes in little-endian byteorder
- */
-static inline int ieee80211_is_cts(__le16 fc)
-{
-	return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) ==
-	       cpu_to_le16(IEEE80211_FTYPE_CTL | IEEE80211_STYPE_CTS);
-}
-
-/**
- * ieee80211_is_ack - check if IEEE80211_FTYPE_CTL && IEEE80211_STYPE_ACK
- * @fc: frame control bytes in little-endian byteorder
- */
-static inline int ieee80211_is_ack(__le16 fc)
-{
-	return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) ==
-	       cpu_to_le16(IEEE80211_FTYPE_CTL | IEEE80211_STYPE_ACK);
-}
-
-/**
- * ieee80211_is_cfend - check if IEEE80211_FTYPE_CTL && IEEE80211_STYPE_CFEND
- * @fc: frame control bytes in little-endian byteorder
- */
-static inline int ieee80211_is_cfend(__le16 fc)
-{
-	return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) ==
-	       cpu_to_le16(IEEE80211_FTYPE_CTL | IEEE80211_STYPE_CFEND);
-}
-
-/**
- * ieee80211_is_cfendack - check if IEEE80211_FTYPE_CTL && IEEE80211_STYPE_CFENDACK
- * @fc: frame control bytes in little-endian byteorder
- */
-static inline int ieee80211_is_cfendack(__le16 fc)
-{
-	return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) ==
-	       cpu_to_le16(IEEE80211_FTYPE_CTL | IEEE80211_STYPE_CFENDACK);
-}
-
-/**
- * ieee80211_is_nullfunc - check if frame is a regular (non-QoS) nullfunc frame
- * @fc: frame control bytes in little-endian byteorder
- */
-static inline int ieee80211_is_nullfunc(__le16 fc)
-{
-	return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) ==
-	       cpu_to_le16(IEEE80211_FTYPE_DATA | IEEE80211_STYPE_NULLFUNC);
-}
-
-/**
- * ieee80211_is_qos_nullfunc - check if frame is a QoS nullfunc frame
- * @fc: frame control bytes in little-endian byteorder
- */
-static inline int ieee80211_is_qos_nullfunc(__le16 fc)
-{
-	return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) ==
-	       cpu_to_le16(IEEE80211_FTYPE_DATA | IEEE80211_STYPE_QOS_NULLFUNC);
-}
-
-/**
- * ieee80211_is_first_frag - check if IEEE80211_SCTL_FRAG is not set
- * @seq_ctrl: frame sequence control bytes in little-endian byteorder
- */
-static inline int ieee80211_is_first_frag(__le16 seq_ctrl)
-{
-	return (seq_ctrl & cpu_to_le16(IEEE80211_SCTL_FRAG)) == 0;
-}
-
-struct ieee80211s_hdr {
-	u8 flags;
-	u8 ttl;
-	__le32 seqnum;
-	u8 eaddr1[6];
-	u8 eaddr2[6];
-} __attribute__ ((packed));
-
-/* Mesh flags */
-#define MESH_FLAGS_AE_A4 	0x1
-#define MESH_FLAGS_AE_A5_A6	0x2
-#define MESH_FLAGS_AE		0x3
-#define MESH_FLAGS_PS_DEEP	0x4
-
-/**
- * struct ieee80211_quiet_ie
- *
- * This structure refers to "Quiet information element"
- */
-struct ieee80211_quiet_ie {
-	u8 count;
-	u8 period;
-	__le16 duration;
-	__le16 offset;
-} __attribute__ ((packed));
-
-/**
- * struct ieee80211_msrment_ie
- *
- * This structure refers to "Measurement Request/Report information element"
- */
-struct ieee80211_msrment_ie {
-	u8 token;
-	u8 mode;
-	u8 type;
-	u8 request[0];
-} __attribute__ ((packed));
-
-/**
- * struct ieee80211_channel_sw_ie
- *
- * This structure refers to "Channel Switch Announcement information element"
- */
-struct ieee80211_channel_sw_ie {
-	u8 mode;
-	u8 new_ch_num;
-	u8 count;
-} __attribute__ ((packed));
-
-/**
- * struct ieee80211_tim
- *
- * This structure refers to "Traffic Indication Map information element"
- */
-struct ieee80211_tim_ie {
-	u8 dtim_count;
-	u8 dtim_period;
-	u8 bitmap_ctrl;
-	/* variable size: 1 - 251 bytes */
-	u8 virtual_map[1];
-} __attribute__ ((packed));
-
-/**
- * struct ieee80211_meshconf_ie
- *
- * This structure refers to "Mesh Configuration information element"
- */
-struct ieee80211_meshconf_ie {
-	u8 meshconf_psel;
-	u8 meshconf_pmetric;
-	u8 meshconf_congest;
-	u8 meshconf_synch;
-	u8 meshconf_auth;
-	u8 meshconf_form;
-	u8 meshconf_cap;
-} __attribute__ ((packed));
-
-/**
- * struct ieee80211_rann_ie
- *
- * This structure refers to "Root Announcement information element"
- */
-struct ieee80211_rann_ie {
-	u8 rann_flags;
-	u8 rann_hopcount;
-	u8 rann_ttl;
-	u8 rann_addr[6];
-	u32 rann_seq;
-	u32 rann_interval;
-	u32 rann_metric;
-} __attribute__ ((packed));
-
-enum ieee80211_rann_flags {
-	RANN_FLAG_IS_GATE = 1 << 0,
-};
-
-#define WLAN_SA_QUERY_TR_ID_LEN 2
-
-struct ieee80211_mgmt {
-	__le16 frame_control;
-	__le16 duration;
-	u8 da[6];
-	u8 sa[6];
-	u8 bssid[6];
-	__le16 seq_ctrl;
-	union {
-		struct {
-			__le16 auth_alg;
-			__le16 auth_transaction;
-			__le16 status_code;
-			/* possibly followed by Challenge text */
-			u8 variable[0];
-		} __attribute__ ((packed)) auth;
-		struct {
-			__le16 reason_code;
-		} __attribute__ ((packed)) deauth;
-		struct {
-			__le16 capab_info;
-			__le16 listen_interval;
-			/* followed by SSID and Supported rates */
-			u8 variable[0];
-		} __attribute__ ((packed)) assoc_req;
-		struct {
-			__le16 capab_info;
-			__le16 status_code;
-			__le16 aid;
-			/* followed by Supported rates */
-			u8 variable[0];
-		} __attribute__ ((packed)) assoc_resp, reassoc_resp;
-		struct {
-			__le16 capab_info;
-			__le16 listen_interval;
-			u8 current_ap[6];
-			/* followed by SSID and Supported rates */
-			u8 variable[0];
-		} __attribute__ ((packed)) reassoc_req;
-		struct {
-			__le16 reason_code;
-		} __attribute__ ((packed)) disassoc;
-		struct {
-			__le64 timestamp;
-			__le16 beacon_int;
-			__le16 capab_info;
-			/* followed by some of SSID, Supported rates,
-			 * FH Params, DS Params, CF Params, IBSS Params, TIM */
-			u8 variable[0];
-		} __attribute__ ((packed)) beacon;
-		struct {
-			/* only variable items: SSID, Supported rates */
-			u8 variable[0];
-		} __attribute__ ((packed)) probe_req;
-		struct {
-			__le64 timestamp;
-			__le16 beacon_int;
-			__le16 capab_info;
-			/* followed by some of SSID, Supported rates,
-			 * FH Params, DS Params, CF Params, IBSS Params */
-			u8 variable[0];
-		} __attribute__ ((packed)) probe_resp;
-		struct {
-			u8 category;
-			union {
-				struct {
-					u8 action_code;
-					u8 dialog_token;
-					u8 status_code;
-					u8 variable[0];
-				} __attribute__ ((packed)) wme_action;
-				struct{
-					u8 action_code;
-					u8 element_id;
-					u8 length;
-					struct ieee80211_channel_sw_ie sw_elem;
-				} __attribute__((packed)) chan_switch;
-				struct{
-					u8 action_code;
-					u8 dialog_token;
-					u8 element_id;
-					u8 length;
-					struct ieee80211_msrment_ie msr_elem;
-				} __attribute__((packed)) measurement;
-				struct{
-					u8 action_code;
-					u8 dialog_token;
-					__le16 capab;
-					__le16 timeout;
-					__le16 start_seq_num;
-				} __attribute__((packed)) addba_req;
-				struct{
-					u8 action_code;
-					u8 dialog_token;
-					__le16 status;
-					__le16 capab;
-					__le16 timeout;
-				} __attribute__((packed)) addba_resp;
-				struct{
-					u8 action_code;
-					__le16 params;
-					__le16 reason_code;
-				} __attribute__((packed)) delba;
-				struct {
-					u8 action_code;
-					u8 variable[0];
-				} __attribute__((packed)) self_prot;
-				struct{
-					u8 action_code;
-					u8 variable[0];
-				} __attribute__((packed)) mesh_action;
-				struct {
-					u8 action;
-					u8 trans_id[WLAN_SA_QUERY_TR_ID_LEN];
-				} __attribute__ ((packed)) sa_query;
-				struct {
-					u8 action;
-					u8 smps_control;
-				} __attribute__ ((packed)) ht_smps;
-				struct {
-					u8 action_code;
-					u8 dialog_token;
-					__le16 capability;
-					u8 variable[0];
-				} __packed tdls_discover_resp;
-			} u;
-		} __attribute__ ((packed)) action;
-	} u;
-} __attribute__ ((packed));
-
-/* Supported Rates value encodings in 802.11n-2009 7.3.2.2 */
-#define BSS_MEMBERSHIP_SELECTOR_HT_PHY	127
-
-/* mgmt header + 1 byte category code */
-#define IEEE80211_MIN_ACTION_SIZE offsetof(struct ieee80211_mgmt, u.action.u)
-
-
-/* Management MIC information element (IEEE 802.11w) */
-struct ieee80211_mmie {
-	u8 element_id;
-	u8 length;
-	__le16 key_id;
-	u8 sequence_number[6];
-	u8 mic[8];
-} __attribute__ ((packed));
-
-struct ieee80211_vendor_ie {
-	u8 element_id;
-	u8 len;
-	u8 oui[3];
-	u8 oui_type;
-} __packed;
-
-/* Control frames */
-struct ieee80211_rts {
-	__le16 frame_control;
-	__le16 duration;
-	u8 ra[6];
-	u8 ta[6];
-} __attribute__ ((packed));
-
-struct ieee80211_cts {
-	__le16 frame_control;
-	__le16 duration;
-	u8 ra[6];
-} __attribute__ ((packed));
-
-struct ieee80211_pspoll {
-	__le16 frame_control;
-	__le16 aid;
-	u8 bssid[6];
-	u8 ta[6];
-} __attribute__ ((packed));
-
-/* TDLS */
-
-/* Link-id information element */
-struct ieee80211_tdls_lnkie {
-	u8 ie_type; /* Link Identifier IE */
-	u8 ie_len;
-	u8 bssid[6];
-	u8 init_sta[6];
-	u8 resp_sta[6];
-} __packed;
-
-struct ieee80211_tdls_data {
-	u8 da[6];
-	u8 sa[6];
-	__be16 ether_type;
-	u8 payload_type;
-	u8 category;
-	u8 action_code;
-	union {
-		struct {
-			u8 dialog_token;
-			__le16 capability;
-			u8 variable[0];
-		} __packed setup_req;
-		struct {
-			__le16 status_code;
-			u8 dialog_token;
-			__le16 capability;
-			u8 variable[0];
-		} __packed setup_resp;
-		struct {
-			__le16 status_code;
-			u8 dialog_token;
-			u8 variable[0];
-		} __packed setup_cfm;
-		struct {
-			__le16 reason_code;
-			u8 variable[0];
-		} __packed teardown;
-		struct {
-			u8 dialog_token;
-			u8 variable[0];
-		} __packed discover_req;
-	} u;
-} __packed;
-
-/**
- * struct ieee80211_bar - HT Block Ack Request
- *
- * This structure refers to "HT BlockAckReq" as
- * described in 802.11n draft section 7.2.1.7.1
- */
-struct ieee80211_bar {
-	__le16 frame_control;
-	__le16 duration;
-	__u8 ra[6];
-	__u8 ta[6];
-	__le16 control;
-	__le16 start_seq_num;
-} __attribute__((packed));
-
-/* 802.11 BAR control masks */
-#define IEEE80211_BAR_CTRL_ACK_POLICY_NORMAL	0x0000
-#define IEEE80211_BAR_CTRL_MULTI_TID		0x0002
-#define IEEE80211_BAR_CTRL_CBMTID_COMPRESSED_BA	0x0004
-#define IEEE80211_BAR_CTRL_TID_INFO_MASK	0xf000
-#define IEEE80211_BAR_CTRL_TID_INFO_SHIFT	12
-
-#define IEEE80211_HT_MCS_MASK_LEN		10
-
-/**
- * struct ieee80211_mcs_info - MCS information
- * @rx_mask: RX mask
- * @rx_highest: highest supported RX rate. If set represents
- *	the highest supported RX data rate in units of 1 Mbps.
- *	If this field is 0 this value should not be used to
- *	consider the highest RX data rate supported.
- * @tx_params: TX parameters
- */
-struct ieee80211_mcs_info {
-	u8 rx_mask[IEEE80211_HT_MCS_MASK_LEN];
-	__le16 rx_highest;
-	u8 tx_params;
-	u8 reserved[3];
-} __attribute__((packed));
-
-/* 802.11n HT capability MSC set */
-#define IEEE80211_HT_MCS_RX_HIGHEST_MASK	0x3ff
-#define IEEE80211_HT_MCS_TX_DEFINED		0x01
-#define IEEE80211_HT_MCS_TX_RX_DIFF		0x02
-/* value 0 == 1 stream etc */
-#define IEEE80211_HT_MCS_TX_MAX_STREAMS_MASK	0x0C
-#define IEEE80211_HT_MCS_TX_MAX_STREAMS_SHIFT	2
-#define		IEEE80211_HT_MCS_TX_MAX_STREAMS	4
-#define IEEE80211_HT_MCS_TX_UNEQUAL_MODULATION	0x10
-
-/*
- * 802.11n D5.0 20.3.5 / 20.6 says:
- * - indices 0 to 7 and 32 are single spatial stream
- * - 8 to 31 are multiple spatial streams using equal modulation
- *   [8..15 for two streams, 16..23 for three and 24..31 for four]
- * - remainder are multiple spatial streams using unequal modulation
- */
-#define IEEE80211_HT_MCS_UNEQUAL_MODULATION_START 33
-#define IEEE80211_HT_MCS_UNEQUAL_MODULATION_START_BYTE \
-	(IEEE80211_HT_MCS_UNEQUAL_MODULATION_START / 8)
-
-/**
- * struct ieee80211_ht_cap - HT capabilities
- *
- * This structure is the "HT capabilities element" as
- * described in 802.11n D5.0 7.3.2.57
- */
-struct ieee80211_ht_cap {
-	__le16 cap_info;
-	u8 ampdu_params_info;
-
-	/* 16 bytes MCS information */
-	struct ieee80211_mcs_info mcs;
-
-	__le16 extended_ht_cap_info;
-	__le32 tx_BF_cap_info;
-	u8 antenna_selection_info;
-} __attribute__ ((packed));
-
-/* 802.11n HT capabilities masks (for cap_info) */
-#define IEEE80211_HT_CAP_LDPC_CODING		0x0001
-#define IEEE80211_HT_CAP_SUP_WIDTH_20_40	0x0002
-#define IEEE80211_HT_CAP_SM_PS			0x000C
-#define		IEEE80211_HT_CAP_SM_PS_SHIFT	2
-#define IEEE80211_HT_CAP_GRN_FLD		0x0010
-#define IEEE80211_HT_CAP_SGI_20			0x0020
-#define IEEE80211_HT_CAP_SGI_40			0x0040
-#define IEEE80211_HT_CAP_TX_STBC		0x0080
-#define IEEE80211_HT_CAP_RX_STBC		0x0300
-#define		IEEE80211_HT_CAP_RX_STBC_SHIFT	8
-#define IEEE80211_HT_CAP_DELAY_BA		0x0400
-#define IEEE80211_HT_CAP_MAX_AMSDU		0x0800
-#define IEEE80211_HT_CAP_DSSSCCK40		0x1000
-#define IEEE80211_HT_CAP_RESERVED		0x2000
-#define IEEE80211_HT_CAP_40MHZ_INTOLERANT	0x4000
-#define IEEE80211_HT_CAP_LSIG_TXOP_PROT		0x8000
-
-/* 802.11n HT extended capabilities masks (for extended_ht_cap_info) */
-#define IEEE80211_HT_EXT_CAP_PCO		0x0001
-#define IEEE80211_HT_EXT_CAP_PCO_TIME		0x0006
-#define		IEEE80211_HT_EXT_CAP_PCO_TIME_SHIFT	1
-#define IEEE80211_HT_EXT_CAP_MCS_FB		0x0300
-#define		IEEE80211_HT_EXT_CAP_MCS_FB_SHIFT	8
-#define IEEE80211_HT_EXT_CAP_HTC_SUP		0x0400
-#define IEEE80211_HT_EXT_CAP_RD_RESPONDER	0x0800
-
-/* 802.11n HT capability AMPDU settings (for ampdu_params_info) */
-#define IEEE80211_HT_AMPDU_PARM_FACTOR		0x03
-#define IEEE80211_HT_AMPDU_PARM_DENSITY		0x1C
-#define		IEEE80211_HT_AMPDU_PARM_DENSITY_SHIFT	2
-
-/*
- * Maximum length of AMPDU that the STA can receive.
- * Length = 2 ^ (13 + max_ampdu_length_exp) - 1 (octets)
- */
-enum ieee80211_max_ampdu_length_exp {
-	IEEE80211_HT_MAX_AMPDU_8K = 0,
-	IEEE80211_HT_MAX_AMPDU_16K = 1,
-	IEEE80211_HT_MAX_AMPDU_32K = 2,
-	IEEE80211_HT_MAX_AMPDU_64K = 3
-};
-
-#define IEEE80211_HT_MAX_AMPDU_FACTOR 13
-
-/* Minimum MPDU start spacing */
-enum ieee80211_min_mpdu_spacing {
-	IEEE80211_HT_MPDU_DENSITY_NONE = 0,	/* No restriction */
-	IEEE80211_HT_MPDU_DENSITY_0_25 = 1,	/* 1/4 usec */
-	IEEE80211_HT_MPDU_DENSITY_0_5 = 2,	/* 1/2 usec */
-	IEEE80211_HT_MPDU_DENSITY_1 = 3,	/* 1 usec */
-	IEEE80211_HT_MPDU_DENSITY_2 = 4,	/* 2 usec */
-	IEEE80211_HT_MPDU_DENSITY_4 = 5,	/* 4 usec */
-	IEEE80211_HT_MPDU_DENSITY_8 = 6,	/* 8 usec */
-	IEEE80211_HT_MPDU_DENSITY_16 = 7	/* 16 usec */
-};
-
-/**
- * struct ieee80211_ht_info - HT information
- *
- * This structure is the "HT information element" as
- * described in 802.11n D5.0 7.3.2.58
- */
-struct ieee80211_ht_info {
-	u8 control_chan;
-	u8 ht_param;
-	__le16 operation_mode;
-	__le16 stbc_param;
-	u8 basic_set[16];
-} __attribute__ ((packed));
-
-/* for ht_param */
-#define IEEE80211_HT_PARAM_CHA_SEC_OFFSET		0x03
-#define		IEEE80211_HT_PARAM_CHA_SEC_NONE		0x00
-#define		IEEE80211_HT_PARAM_CHA_SEC_ABOVE	0x01
-#define		IEEE80211_HT_PARAM_CHA_SEC_BELOW	0x03
-#define IEEE80211_HT_PARAM_CHAN_WIDTH_ANY		0x04
-#define IEEE80211_HT_PARAM_RIFS_MODE			0x08
-#define IEEE80211_HT_PARAM_SPSMP_SUPPORT		0x10
-#define IEEE80211_HT_PARAM_SERV_INTERVAL_GRAN		0xE0
-
-/* for operation_mode */
-#define IEEE80211_HT_OP_MODE_PROTECTION			0x0003
-#define		IEEE80211_HT_OP_MODE_PROTECTION_NONE		0
-#define		IEEE80211_HT_OP_MODE_PROTECTION_NONMEMBER	1
-#define		IEEE80211_HT_OP_MODE_PROTECTION_20MHZ		2
-#define		IEEE80211_HT_OP_MODE_PROTECTION_NONHT_MIXED	3
-#define IEEE80211_HT_OP_MODE_NON_GF_STA_PRSNT		0x0004
-#define IEEE80211_HT_OP_MODE_NON_HT_STA_PRSNT		0x0010
-
-/* for stbc_param */
-#define IEEE80211_HT_STBC_PARAM_DUAL_BEACON		0x0040
-#define IEEE80211_HT_STBC_PARAM_DUAL_CTS_PROT		0x0080
-#define IEEE80211_HT_STBC_PARAM_STBC_BEACON		0x0100
-#define IEEE80211_HT_STBC_PARAM_LSIG_TXOP_FULLPROT	0x0200
-#define IEEE80211_HT_STBC_PARAM_PCO_ACTIVE		0x0400
-#define IEEE80211_HT_STBC_PARAM_PCO_PHASE		0x0800
-
-
-/* block-ack parameters */
-#define IEEE80211_ADDBA_PARAM_POLICY_MASK 0x0002
-#define IEEE80211_ADDBA_PARAM_TID_MASK 0x003C
-#define IEEE80211_ADDBA_PARAM_BUF_SIZE_MASK 0xFFC0
-#define IEEE80211_DELBA_PARAM_TID_MASK 0xF000
-#define IEEE80211_DELBA_PARAM_INITIATOR_MASK 0x0800
-
-/*
- * A-PMDU buffer sizes
- * According to IEEE802.11n spec size varies from 8K to 64K (in powers of 2)
- */
-#define IEEE80211_MIN_AMPDU_BUF 0x8
-#define IEEE80211_MAX_AMPDU_BUF 0x40
-
-
-/* Spatial Multiplexing Power Save Modes (for capability) */
-#define WLAN_HT_CAP_SM_PS_STATIC	0
-#define WLAN_HT_CAP_SM_PS_DYNAMIC	1
-#define WLAN_HT_CAP_SM_PS_INVALID	2
-#define WLAN_HT_CAP_SM_PS_DISABLED	3
-
-/* for SM power control field lower two bits */
-#define WLAN_HT_SMPS_CONTROL_DISABLED	0
-#define WLAN_HT_SMPS_CONTROL_STATIC	1
-#define WLAN_HT_SMPS_CONTROL_DYNAMIC	3
-
-/* Authentication algorithms */
-#define WLAN_AUTH_OPEN 0
-#define WLAN_AUTH_SHARED_KEY 1
-#define WLAN_AUTH_FT 2
-#define WLAN_AUTH_SAE 3
-#define WLAN_AUTH_LEAP 128
-
-#define WLAN_AUTH_CHALLENGE_LEN 128
-
-#define WLAN_CAPABILITY_ESS		(1<<0)
-#define WLAN_CAPABILITY_IBSS		(1<<1)
-
-/*
- * A mesh STA sets the ESS and IBSS capability bits to zero.
- * however, this holds true for p2p probe responses (in the p2p_find
- * phase) as well.
- */
-#define WLAN_CAPABILITY_IS_STA_BSS(cap)	\
-	(!((cap) & (WLAN_CAPABILITY_ESS | WLAN_CAPABILITY_IBSS)))
-
-#define WLAN_CAPABILITY_CF_POLLABLE	(1<<2)
-#define WLAN_CAPABILITY_CF_POLL_REQUEST	(1<<3)
-#define WLAN_CAPABILITY_PRIVACY		(1<<4)
-#define WLAN_CAPABILITY_SHORT_PREAMBLE	(1<<5)
-#define WLAN_CAPABILITY_PBCC		(1<<6)
-#define WLAN_CAPABILITY_CHANNEL_AGILITY	(1<<7)
-
-/* 802.11h */
-#define WLAN_CAPABILITY_SPECTRUM_MGMT	(1<<8)
-#define WLAN_CAPABILITY_QOS		(1<<9)
-#define WLAN_CAPABILITY_SHORT_SLOT_TIME	(1<<10)
-#define WLAN_CAPABILITY_DSSS_OFDM	(1<<13)
-/* measurement */
-#define IEEE80211_SPCT_MSR_RPRT_MODE_LATE	(1<<0)
-#define IEEE80211_SPCT_MSR_RPRT_MODE_INCAPABLE	(1<<1)
-#define IEEE80211_SPCT_MSR_RPRT_MODE_REFUSED	(1<<2)
-
-#define IEEE80211_SPCT_MSR_RPRT_TYPE_BASIC	0
-#define IEEE80211_SPCT_MSR_RPRT_TYPE_CCA	1
-#define IEEE80211_SPCT_MSR_RPRT_TYPE_RPI	2
-
-
-/* 802.11g ERP information element */
-#define WLAN_ERP_NON_ERP_PRESENT (1<<0)
-#define WLAN_ERP_USE_PROTECTION (1<<1)
-#define WLAN_ERP_BARKER_PREAMBLE (1<<2)
-
-/* WLAN_ERP_BARKER_PREAMBLE values */
-enum {
-	WLAN_ERP_PREAMBLE_SHORT = 0,
-	WLAN_ERP_PREAMBLE_LONG = 1,
-};
-
-/* Status codes */
-enum ieee80211_statuscode {
-	WLAN_STATUS_SUCCESS = 0,
-	WLAN_STATUS_UNSPECIFIED_FAILURE = 1,
-	WLAN_STATUS_CAPS_UNSUPPORTED = 10,
-	WLAN_STATUS_REASSOC_NO_ASSOC = 11,
-	WLAN_STATUS_ASSOC_DENIED_UNSPEC = 12,
-	WLAN_STATUS_NOT_SUPPORTED_AUTH_ALG = 13,
-	WLAN_STATUS_UNKNOWN_AUTH_TRANSACTION = 14,
-	WLAN_STATUS_CHALLENGE_FAIL = 15,
-	WLAN_STATUS_AUTH_TIMEOUT = 16,
-	WLAN_STATUS_AP_UNABLE_TO_HANDLE_NEW_STA = 17,
-	WLAN_STATUS_ASSOC_DENIED_RATES = 18,
-	/* 802.11b */
-	WLAN_STATUS_ASSOC_DENIED_NOSHORTPREAMBLE = 19,
-	WLAN_STATUS_ASSOC_DENIED_NOPBCC = 20,
-	WLAN_STATUS_ASSOC_DENIED_NOAGILITY = 21,
-	/* 802.11h */
-	WLAN_STATUS_ASSOC_DENIED_NOSPECTRUM = 22,
-	WLAN_STATUS_ASSOC_REJECTED_BAD_POWER = 23,
-	WLAN_STATUS_ASSOC_REJECTED_BAD_SUPP_CHAN = 24,
-	/* 802.11g */
-	WLAN_STATUS_ASSOC_DENIED_NOSHORTTIME = 25,
-	WLAN_STATUS_ASSOC_DENIED_NODSSSOFDM = 26,
-	/* 802.11w */
-	WLAN_STATUS_ASSOC_REJECTED_TEMPORARILY = 30,
-	WLAN_STATUS_ROBUST_MGMT_FRAME_POLICY_VIOLATION = 31,
-	/* 802.11i */
-	WLAN_STATUS_INVALID_IE = 40,
-	WLAN_STATUS_INVALID_GROUP_CIPHER = 41,
-	WLAN_STATUS_INVALID_PAIRWISE_CIPHER = 42,
-	WLAN_STATUS_INVALID_AKMP = 43,
-	WLAN_STATUS_UNSUPP_RSN_VERSION = 44,
-	WLAN_STATUS_INVALID_RSN_IE_CAP = 45,
-	WLAN_STATUS_CIPHER_SUITE_REJECTED = 46,
-	/* 802.11e */
-	WLAN_STATUS_UNSPECIFIED_QOS = 32,
-	WLAN_STATUS_ASSOC_DENIED_NOBANDWIDTH = 33,
-	WLAN_STATUS_ASSOC_DENIED_LOWACK = 34,
-	WLAN_STATUS_ASSOC_DENIED_UNSUPP_QOS = 35,
-	WLAN_STATUS_REQUEST_DECLINED = 37,
-	WLAN_STATUS_INVALID_QOS_PARAM = 38,
-	WLAN_STATUS_CHANGE_TSPEC = 39,
-	WLAN_STATUS_WAIT_TS_DELAY = 47,
-	WLAN_STATUS_NO_DIRECT_LINK = 48,
-	WLAN_STATUS_STA_NOT_PRESENT = 49,
-	WLAN_STATUS_STA_NOT_QSTA = 50,
-	/* 802.11s */
-	WLAN_STATUS_ANTI_CLOG_REQUIRED = 76,
-	WLAN_STATUS_FCG_NOT_SUPP = 78,
-	WLAN_STATUS_STA_NO_TBTT = 78,
-};
-
-
-/* Reason codes */
-enum ieee80211_reasoncode {
-	WLAN_REASON_UNSPECIFIED = 1,
-	WLAN_REASON_PREV_AUTH_NOT_VALID = 2,
-	WLAN_REASON_DEAUTH_LEAVING = 3,
-	WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY = 4,
-	WLAN_REASON_DISASSOC_AP_BUSY = 5,
-	WLAN_REASON_CLASS2_FRAME_FROM_NONAUTH_STA = 6,
-	WLAN_REASON_CLASS3_FRAME_FROM_NONASSOC_STA = 7,
-	WLAN_REASON_DISASSOC_STA_HAS_LEFT = 8,
-	WLAN_REASON_STA_REQ_ASSOC_WITHOUT_AUTH = 9,
-	/* 802.11h */
-	WLAN_REASON_DISASSOC_BAD_POWER = 10,
-	WLAN_REASON_DISASSOC_BAD_SUPP_CHAN = 11,
-	/* 802.11i */
-	WLAN_REASON_INVALID_IE = 13,
-	WLAN_REASON_MIC_FAILURE = 14,
-	WLAN_REASON_4WAY_HANDSHAKE_TIMEOUT = 15,
-	WLAN_REASON_GROUP_KEY_HANDSHAKE_TIMEOUT = 16,
-	WLAN_REASON_IE_DIFFERENT = 17,
-	WLAN_REASON_INVALID_GROUP_CIPHER = 18,
-	WLAN_REASON_INVALID_PAIRWISE_CIPHER = 19,
-	WLAN_REASON_INVALID_AKMP = 20,
-	WLAN_REASON_UNSUPP_RSN_VERSION = 21,
-	WLAN_REASON_INVALID_RSN_IE_CAP = 22,
-	WLAN_REASON_IEEE8021X_FAILED = 23,
-	WLAN_REASON_CIPHER_SUITE_REJECTED = 24,
-	/* 802.11e */
-	WLAN_REASON_DISASSOC_UNSPECIFIED_QOS = 32,
-	WLAN_REASON_DISASSOC_QAP_NO_BANDWIDTH = 33,
-	WLAN_REASON_DISASSOC_LOW_ACK = 34,
-	WLAN_REASON_DISASSOC_QAP_EXCEED_TXOP = 35,
-	WLAN_REASON_QSTA_LEAVE_QBSS = 36,
-	WLAN_REASON_QSTA_NOT_USE = 37,
-	WLAN_REASON_QSTA_REQUIRE_SETUP = 38,
-	WLAN_REASON_QSTA_TIMEOUT = 39,
-	WLAN_REASON_QSTA_CIPHER_NOT_SUPP = 45,
-	/* 802.11s */
-	WLAN_REASON_MESH_PEER_CANCELED = 52,
-	WLAN_REASON_MESH_MAX_PEERS = 53,
-	WLAN_REASON_MESH_CONFIG = 54,
-	WLAN_REASON_MESH_CLOSE = 55,
-	WLAN_REASON_MESH_MAX_RETRIES = 56,
-	WLAN_REASON_MESH_CONFIRM_TIMEOUT = 57,
-	WLAN_REASON_MESH_INVALID_GTK = 58,
-	WLAN_REASON_MESH_INCONSISTENT_PARAM = 59,
-	WLAN_REASON_MESH_INVALID_SECURITY = 60,
-	WLAN_REASON_MESH_PATH_ERROR = 61,
-	WLAN_REASON_MESH_PATH_NOFORWARD = 62,
-	WLAN_REASON_MESH_PATH_DEST_UNREACHABLE = 63,
-	WLAN_REASON_MAC_EXISTS_IN_MBSS = 64,
-	WLAN_REASON_MESH_CHAN_REGULATORY = 65,
-	WLAN_REASON_MESH_CHAN = 66,
-};
-
-
-/* Information Element IDs */
-enum ieee80211_eid {
-	WLAN_EID_SSID = 0,
-	WLAN_EID_SUPP_RATES = 1,
-	WLAN_EID_FH_PARAMS = 2,
-	WLAN_EID_DS_PARAMS = 3,
-	WLAN_EID_CF_PARAMS = 4,
-	WLAN_EID_TIM = 5,
-	WLAN_EID_IBSS_PARAMS = 6,
-	WLAN_EID_CHALLENGE = 16,
-
-	WLAN_EID_COUNTRY = 7,
-	WLAN_EID_HP_PARAMS = 8,
-	WLAN_EID_HP_TABLE = 9,
-	WLAN_EID_REQUEST = 10,
-
-	WLAN_EID_QBSS_LOAD = 11,
-	WLAN_EID_EDCA_PARAM_SET = 12,
-	WLAN_EID_TSPEC = 13,
-	WLAN_EID_TCLAS = 14,
-	WLAN_EID_SCHEDULE = 15,
-	WLAN_EID_TS_DELAY = 43,
-	WLAN_EID_TCLAS_PROCESSING = 44,
-	WLAN_EID_QOS_CAPA = 46,
-	/* 802.11z */
-	WLAN_EID_LINK_ID = 101,
-	/* 802.11s */
-	WLAN_EID_MESH_CONFIG = 113,
-	WLAN_EID_MESH_ID = 114,
-	WLAN_EID_LINK_METRIC_REPORT = 115,
-	WLAN_EID_CONGESTION_NOTIFICATION = 116,
-	WLAN_EID_PEER_MGMT = 117,
-	WLAN_EID_CHAN_SWITCH_PARAM = 118,
-	WLAN_EID_MESH_AWAKE_WINDOW = 119,
-	WLAN_EID_BEACON_TIMING = 120,
-	WLAN_EID_MCCAOP_SETUP_REQ = 121,
-	WLAN_EID_MCCAOP_SETUP_RESP = 122,
-	WLAN_EID_MCCAOP_ADVERT = 123,
-	WLAN_EID_MCCAOP_TEARDOWN = 124,
-	WLAN_EID_GANN = 125,
-	WLAN_EID_RANN = 126,
-	WLAN_EID_PREQ = 130,
-	WLAN_EID_PREP = 131,
-	WLAN_EID_PERR = 132,
-	WLAN_EID_PXU = 137,
-	WLAN_EID_PXUC = 138,
-	WLAN_EID_AUTH_MESH_PEER_EXCH = 139,
-	WLAN_EID_MIC = 140,
-
-	WLAN_EID_PWR_CONSTRAINT = 32,
-	WLAN_EID_PWR_CAPABILITY = 33,
-	WLAN_EID_TPC_REQUEST = 34,
-	WLAN_EID_TPC_REPORT = 35,
-	WLAN_EID_SUPPORTED_CHANNELS = 36,
-	WLAN_EID_CHANNEL_SWITCH = 37,
-	WLAN_EID_MEASURE_REQUEST = 38,
-	WLAN_EID_MEASURE_REPORT = 39,
-	WLAN_EID_QUIET = 40,
-	WLAN_EID_IBSS_DFS = 41,
-
-	WLAN_EID_ERP_INFO = 42,
-	WLAN_EID_EXT_SUPP_RATES = 50,
-
-	WLAN_EID_HT_CAPABILITY = 45,
-	WLAN_EID_HT_INFORMATION = 61,
-
-	WLAN_EID_RSN = 48,
-	WLAN_EID_MMIE = 76,
-	WLAN_EID_WPA = 221,
-	WLAN_EID_GENERIC = 221,
-	WLAN_EID_VENDOR_SPECIFIC = 221,
-	WLAN_EID_QOS_PARAMETER = 222,
-
-	WLAN_EID_AP_CHAN_REPORT = 51,
-	WLAN_EID_NEIGHBOR_REPORT = 52,
-	WLAN_EID_RCPI = 53,
-	WLAN_EID_BSS_AVG_ACCESS_DELAY = 63,
-	WLAN_EID_ANTENNA_INFO = 64,
-	WLAN_EID_RSNI = 65,
-	WLAN_EID_MEASUREMENT_PILOT_TX_INFO = 66,
-	WLAN_EID_BSS_AVAILABLE_CAPACITY = 67,
-	WLAN_EID_BSS_AC_ACCESS_DELAY = 68,
-	WLAN_EID_RRM_ENABLED_CAPABILITIES = 70,
-	WLAN_EID_MULTIPLE_BSSID = 71,
-	WLAN_EID_BSS_COEX_2040 = 72,
-	WLAN_EID_OVERLAP_BSS_SCAN_PARAM = 74,
-	WLAN_EID_EXT_CAPABILITY = 127,
-
-	WLAN_EID_MOBILITY_DOMAIN = 54,
-	WLAN_EID_FAST_BSS_TRANSITION = 55,
-	WLAN_EID_TIMEOUT_INTERVAL = 56,
-	WLAN_EID_RIC_DATA = 57,
-	WLAN_EID_RIC_DESCRIPTOR = 75,
-
-	WLAN_EID_DSE_REGISTERED_LOCATION = 58,
-	WLAN_EID_SUPPORTED_REGULATORY_CLASSES = 59,
-	WLAN_EID_EXT_CHANSWITCH_ANN = 60,
-};
-
-/* Action category code */
-enum ieee80211_category {
-	WLAN_CATEGORY_SPECTRUM_MGMT = 0,
-	WLAN_CATEGORY_QOS = 1,
-	WLAN_CATEGORY_DLS = 2,
-	WLAN_CATEGORY_BACK = 3,
-	WLAN_CATEGORY_PUBLIC = 4,
-	WLAN_CATEGORY_HT = 7,
-	WLAN_CATEGORY_SA_QUERY = 8,
-	WLAN_CATEGORY_PROTECTED_DUAL_OF_ACTION = 9,
-	WLAN_CATEGORY_TDLS = 12,
-	WLAN_CATEGORY_MESH_ACTION = 13,
-	WLAN_CATEGORY_MULTIHOP_ACTION = 14,
-	WLAN_CATEGORY_SELF_PROTECTED = 15,
-	WLAN_CATEGORY_WMM = 17,
-	WLAN_CATEGORY_VENDOR_SPECIFIC_PROTECTED = 126,
-	WLAN_CATEGORY_VENDOR_SPECIFIC = 127,
-};
-
-/* SPECTRUM_MGMT action code */
-enum ieee80211_spectrum_mgmt_actioncode {
-	WLAN_ACTION_SPCT_MSR_REQ = 0,
-	WLAN_ACTION_SPCT_MSR_RPRT = 1,
-	WLAN_ACTION_SPCT_TPC_REQ = 2,
-	WLAN_ACTION_SPCT_TPC_RPRT = 3,
-	WLAN_ACTION_SPCT_CHL_SWITCH = 4,
-};
-
-/* HT action codes */
-enum ieee80211_ht_actioncode {
-	WLAN_HT_ACTION_NOTIFY_CHANWIDTH = 0,
-	WLAN_HT_ACTION_SMPS = 1,
-	WLAN_HT_ACTION_PSMP = 2,
-	WLAN_HT_ACTION_PCO_PHASE = 3,
-	WLAN_HT_ACTION_CSI = 4,
-	WLAN_HT_ACTION_NONCOMPRESSED_BF = 5,
-	WLAN_HT_ACTION_COMPRESSED_BF = 6,
-	WLAN_HT_ACTION_ASEL_IDX_FEEDBACK = 7,
-};
-
-/* Self Protected Action codes */
-enum ieee80211_self_protected_actioncode {
-	WLAN_SP_RESERVED = 0,
-	WLAN_SP_MESH_PEERING_OPEN = 1,
-	WLAN_SP_MESH_PEERING_CONFIRM = 2,
-	WLAN_SP_MESH_PEERING_CLOSE = 3,
-	WLAN_SP_MGK_INFORM = 4,
-	WLAN_SP_MGK_ACK = 5,
-};
-
-/* Mesh action codes */
-enum ieee80211_mesh_actioncode {
-	WLAN_MESH_ACTION_LINK_METRIC_REPORT,
-	WLAN_MESH_ACTION_HWMP_PATH_SELECTION,
-	WLAN_MESH_ACTION_GATE_ANNOUNCEMENT,
-	WLAN_MESH_ACTION_CONGESTION_CONTROL_NOTIFICATION,
-	WLAN_MESH_ACTION_MCCA_SETUP_REQUEST,
-	WLAN_MESH_ACTION_MCCA_SETUP_REPLY,
-	WLAN_MESH_ACTION_MCCA_ADVERTISEMENT_REQUEST,
-	WLAN_MESH_ACTION_MCCA_ADVERTISEMENT,
-	WLAN_MESH_ACTION_MCCA_TEARDOWN,
-	WLAN_MESH_ACTION_TBTT_ADJUSTMENT_REQUEST,
-	WLAN_MESH_ACTION_TBTT_ADJUSTMENT_RESPONSE,
-};
-
-/* Security key length */
-enum ieee80211_key_len {
-	WLAN_KEY_LEN_WEP40 = 5,
-	WLAN_KEY_LEN_WEP104 = 13,
-	WLAN_KEY_LEN_CCMP = 16,
-	WLAN_KEY_LEN_TKIP = 32,
-	WLAN_KEY_LEN_AES_CMAC = 16,
-};
-
-/* Public action codes */
-enum ieee80211_pub_actioncode {
-	WLAN_PUB_ACTION_TDLS_DISCOVER_RES = 14,
-};
-
-/* TDLS action codes */
-enum ieee80211_tdls_actioncode {
-	WLAN_TDLS_SETUP_REQUEST = 0,
-	WLAN_TDLS_SETUP_RESPONSE = 1,
-	WLAN_TDLS_SETUP_CONFIRM = 2,
-	WLAN_TDLS_TEARDOWN = 3,
-	WLAN_TDLS_PEER_TRAFFIC_INDICATION = 4,
-	WLAN_TDLS_CHANNEL_SWITCH_REQUEST = 5,
-	WLAN_TDLS_CHANNEL_SWITCH_RESPONSE = 6,
-	WLAN_TDLS_PEER_PSM_REQUEST = 7,
-	WLAN_TDLS_PEER_PSM_RESPONSE = 8,
-	WLAN_TDLS_PEER_TRAFFIC_RESPONSE = 9,
-	WLAN_TDLS_DISCOVERY_REQUEST = 10,
-};
-
-/*
- * TDLS capabililites to be enabled in the 5th byte of the
- * @WLAN_EID_EXT_CAPABILITY information element
- */
-#define WLAN_EXT_CAPA5_TDLS_ENABLED	BIT(5)
-#define WLAN_EXT_CAPA5_TDLS_PROHIBITED	BIT(6)
-
-/* TDLS specific payload type in the LLC/SNAP header */
-#define WLAN_TDLS_SNAP_RFTYPE	0x2
-
-/**
- * enum - mesh path selection protocol identifier
- *
- * @IEEE80211_PATH_PROTOCOL_HWMP: the default path selection protocol
- * @IEEE80211_PATH_PROTOCOL_VENDOR: a vendor specific protocol that will
- * be specified in a vendor specific information element
- */
-enum {
-	IEEE80211_PATH_PROTOCOL_HWMP = 0,
-	IEEE80211_PATH_PROTOCOL_VENDOR = 255,
-};
-
-/**
- * enum - mesh path selection metric identifier
- *
- * @IEEE80211_PATH_METRIC_AIRTIME: the default path selection metric
- * @IEEE80211_PATH_METRIC_VENDOR: a vendor specific metric that will be
- * specified in a vendor specific information element
- */
-enum {
-	IEEE80211_PATH_METRIC_AIRTIME = 0,
-	IEEE80211_PATH_METRIC_VENDOR = 255,
-};
-
-
-/*
- * IEEE 802.11-2007 7.3.2.9 Country information element
- *
- * Minimum length is 8 octets, ie len must be evenly
- * divisible by 2
- */
-
-/* Although the spec says 8 I'm seeing 6 in practice */
-#define IEEE80211_COUNTRY_IE_MIN_LEN	6
-
-/* The Country String field of the element shall be 3 octets in length */
-#define IEEE80211_COUNTRY_STRING_LEN	3
-
-/*
- * For regulatory extension stuff see IEEE 802.11-2007
- * Annex I (page 1141) and Annex J (page 1147). Also
- * review 7.3.2.9.
- *
- * When dot11RegulatoryClassesRequired is true and the
- * first_channel/reg_extension_id is >= 201 then the IE
- * compromises of the 'ext' struct represented below:
- *
- *  - Regulatory extension ID - when generating IE this just needs
- *    to be monotonically increasing for each triplet passed in
- *    the IE
- *  - Regulatory class - index into set of rules
- *  - Coverage class - index into air propagation time (Table 7-27),
- *    in microseconds, you can compute the air propagation time from
- *    the index by multiplying by 3, so index 10 yields a propagation
- *    of 10 us. Valid values are 0-31, values 32-255 are not defined
- *    yet. A value of 0 inicates air propagation of <= 1 us.
- *
- *  See also Table I.2 for Emission limit sets and table
- *  I.3 for Behavior limit sets. Table J.1 indicates how to map
- *  a reg_class to an emission limit set and behavior limit set.
- */
-#define IEEE80211_COUNTRY_EXTENSION_ID 201
-
-/*
- *  Channels numbers in the IE must be monotonically increasing
- *  if dot11RegulatoryClassesRequired is not true.
- *
- *  If dot11RegulatoryClassesRequired is true consecutive
- *  subband triplets following a regulatory triplet shall
- *  have monotonically increasing first_channel number fields.
- *
- *  Channel numbers shall not overlap.
- *
- *  Note that max_power is signed.
- */
-struct ieee80211_country_ie_triplet {
-	union {
-		struct {
-			u8 first_channel;
-			u8 num_channels;
-			s8 max_power;
-		} __attribute__ ((packed)) chans;
-		struct {
-			u8 reg_extension_id;
-			u8 reg_class;
-			u8 coverage_class;
-		} __attribute__ ((packed)) ext;
-	};
-} __attribute__ ((packed));
-
-enum ieee80211_timeout_interval_type {
-	WLAN_TIMEOUT_REASSOC_DEADLINE = 1 /* 802.11r */,
-	WLAN_TIMEOUT_KEY_LIFETIME = 2 /* 802.11r */,
-	WLAN_TIMEOUT_ASSOC_COMEBACK = 3 /* 802.11w */,
-};
-
-/* BACK action code */
-enum ieee80211_back_actioncode {
-	WLAN_ACTION_ADDBA_REQ = 0,
-	WLAN_ACTION_ADDBA_RESP = 1,
-	WLAN_ACTION_DELBA = 2,
-};
-
-/* BACK (block-ack) parties */
-enum ieee80211_back_parties {
-	WLAN_BACK_RECIPIENT = 0,
-	WLAN_BACK_INITIATOR = 1,
-};
-
-/* SA Query action */
-enum ieee80211_sa_query_action {
-	WLAN_ACTION_SA_QUERY_REQUEST = 0,
-	WLAN_ACTION_SA_QUERY_RESPONSE = 1,
-};
-
-
-/* cipher suite selectors */
-#define WLAN_CIPHER_SUITE_USE_GROUP	0x000FAC00
-#define WLAN_CIPHER_SUITE_WEP40		0x000FAC01
-#define WLAN_CIPHER_SUITE_TKIP		0x000FAC02
-/* reserved: 				0x000FAC03 */
-#define WLAN_CIPHER_SUITE_CCMP		0x000FAC04
-#define WLAN_CIPHER_SUITE_WEP104	0x000FAC05
-#define WLAN_CIPHER_SUITE_AES_CMAC	0x000FAC06
-
-#define WLAN_CIPHER_SUITE_SMS4		0x00147201
-
-/* AKM suite selectors */
-#define WLAN_AKM_SUITE_8021X		0x000FAC01
-#define WLAN_AKM_SUITE_PSK		0x000FAC02
-#define WLAN_AKM_SUITE_SAE			0x000FAC08
-#define WLAN_AKM_SUITE_FT_OVER_SAE	0x000FAC09
-
-#define WLAN_MAX_KEY_LEN		32
-
-#define WLAN_PMKID_LEN			16
-
-#define WLAN_OUI_WFA			0x506f9a
-#define WLAN_OUI_TYPE_WFA_P2P		9
-
-/*
- * WMM/802.11e Tspec Element
- */
-#define IEEE80211_WMM_IE_TSPEC_TID_MASK		0x0F
-#define IEEE80211_WMM_IE_TSPEC_TID_SHIFT	1
-
-enum ieee80211_tspec_status_code {
-	IEEE80211_TSPEC_STATUS_ADMISS_ACCEPTED = 0,
-	IEEE80211_TSPEC_STATUS_ADDTS_INVAL_PARAMS = 0x1,
-};
-
-struct ieee80211_tspec_ie {
-	u8 element_id;
-	u8 len;
-	u8 oui[3];
-	u8 oui_type;
-	u8 oui_subtype;
-	u8 version;
-	__le16 tsinfo;
-	u8 tsinfo_resvd;
-	__le16 nominal_msdu;
-	__le16 max_msdu;
-	__le32 min_service_int;
-	__le32 max_service_int;
-	__le32 inactivity_int;
-	__le32 suspension_int;
-	__le32 service_start_time;
-	__le32 min_data_rate;
-	__le32 mean_data_rate;
-	__le32 peak_data_rate;
-	__le32 max_burst_size;
-	__le32 delay_bound;
-	__le32 min_phy_rate;
-	__le16 sba;
-	__le16 medium_time;
-} __packed;
-
-/**
- * ieee80211_get_qos_ctl - get pointer to qos control bytes
- * @hdr: the frame
- *
- * The qos ctrl bytes come after the frame_control, duration, seq_num
- * and 3 or 4 addresses of length ETH_ALEN.
- * 3 addr: 2 + 2 + 2 + 3*6 = 24
- * 4 addr: 2 + 2 + 2 + 4*6 = 30
- */
-static inline u8 *ieee80211_get_qos_ctl(struct ieee80211_hdr *hdr)
-{
-	if (ieee80211_has_a4(hdr->frame_control))
-		return (u8 *)hdr + 30;
-	else
-		return (u8 *)hdr + 24;
-}
-
-/**
- * ieee80211_get_SA - get pointer to SA
- * @hdr: the frame
- *
- * Given an 802.11 frame, this function returns the offset
- * to the source address (SA). It does not verify that the
- * header is long enough to contain the address, and the
- * header must be long enough to contain the frame control
- * field.
- */
-static inline u8 *ieee80211_get_SA(struct ieee80211_hdr *hdr)
-{
-	if (ieee80211_has_a4(hdr->frame_control))
-		return hdr->addr4;
-	if (ieee80211_has_fromds(hdr->frame_control))
-		return hdr->addr3;
-	return hdr->addr2;
-}
-
-/**
- * ieee80211_get_DA - get pointer to DA
- * @hdr: the frame
- *
- * Given an 802.11 frame, this function returns the offset
- * to the destination address (DA). It does not verify that
- * the header is long enough to contain the address, and the
- * header must be long enough to contain the frame control
- * field.
- */
-static inline u8 *ieee80211_get_DA(struct ieee80211_hdr *hdr)
-{
-	if (ieee80211_has_tods(hdr->frame_control))
-		return hdr->addr3;
-	else
-		return hdr->addr1;
-}
-
-/**
- * ieee80211_is_robust_mgmt_frame - check if frame is a robust management frame
- * @hdr: the frame (buffer must include at least the first octet of payload)
- */
-static inline bool ieee80211_is_robust_mgmt_frame(struct ieee80211_hdr *hdr)
-{
-	if (ieee80211_is_disassoc(hdr->frame_control) ||
-	    ieee80211_is_deauth(hdr->frame_control))
-		return true;
-
-	if (ieee80211_is_action(hdr->frame_control)) {
-		u8 *category;
-
-		/*
-		 * Action frames, excluding Public Action frames, are Robust
-		 * Management Frames. However, if we are looking at a Protected
-		 * frame, skip the check since the data may be encrypted and
-		 * the frame has already been found to be a Robust Management
-		 * Frame (by the other end).
-		 */
-		if (ieee80211_has_protected(hdr->frame_control))
-			return true;
-		category = ((u8 *) hdr) + 24;
-		return *category != WLAN_CATEGORY_PUBLIC &&
-			*category != WLAN_CATEGORY_HT &&
-			*category != WLAN_CATEGORY_SELF_PROTECTED &&
-			*category != WLAN_CATEGORY_VENDOR_SPECIFIC;
-	}
-
-	return false;
-}
-
-/**
- * ieee80211_is_public_action - check if frame is a public action frame
- * @hdr: the frame
- * @len: length of the frame
- */
-static inline bool ieee80211_is_public_action(struct ieee80211_hdr *hdr,
-					      size_t len)
-{
-	struct ieee80211_mgmt *mgmt = (void *)hdr;
-
-	if (len < IEEE80211_MIN_ACTION_SIZE)
-		return false;
-	if (!ieee80211_is_action(hdr->frame_control))
-		return false;
-	return mgmt->u.action.category == WLAN_CATEGORY_PUBLIC;
-}
-
-/**
- * ieee80211_fhss_chan_to_freq - get channel frequency
- * @channel: the FHSS channel
- *
- * Convert IEEE802.11 FHSS channel to frequency (MHz)
- * Ref IEEE 802.11-2007 section 14.6
- */
-static inline int ieee80211_fhss_chan_to_freq(int channel)
-{
-	if ((channel > 1) && (channel < 96))
-		return channel + 2400;
-	else
-		return -1;
-}
-
-/**
- * ieee80211_freq_to_fhss_chan - get channel
- * @freq: the channels frequency
- *
- * Convert frequency (MHz) to IEEE802.11 FHSS channel
- * Ref IEEE 802.11-2007 section 14.6
- */
-static inline int ieee80211_freq_to_fhss_chan(int freq)
-{
-	if ((freq > 2401) && (freq < 2496))
-		return freq - 2400;
-	else
-		return -1;
-}
-
-/**
- * ieee80211_dsss_chan_to_freq - get channel center frequency
- * @channel: the DSSS channel
- *
- * Convert IEEE802.11 DSSS channel to the center frequency (MHz).
- * Ref IEEE 802.11-2007 section 15.6
- */
-static inline int ieee80211_dsss_chan_to_freq(int channel)
-{
-	if ((channel > 0) && (channel < 14))
-		return 2407 + (channel * 5);
-	else if (channel == 14)
-		return 2484;
-	else
-		return -1;
-}
-
-/**
- * ieee80211_freq_to_dsss_chan - get channel
- * @freq: the frequency
- *
- * Convert frequency (MHz) to IEEE802.11 DSSS channel
- * Ref IEEE 802.11-2007 section 15.6
- *
- * This routine selects the channel with the closest center frequency.
- */
-static inline int ieee80211_freq_to_dsss_chan(int freq)
-{
-	if ((freq >= 2410) && (freq < 2475))
-		return (freq - 2405) / 5;
-	else if ((freq >= 2482) && (freq < 2487))
-		return 14;
-	else
-		return -1;
-}
-
-/* Convert IEEE802.11 HR DSSS channel to frequency (MHz) and back
- * Ref IEEE 802.11-2007 section 18.4.6.2
- *
- * The channels and frequencies are the same as those defined for DSSS
- */
-#define ieee80211_hr_chan_to_freq(chan) ieee80211_dsss_chan_to_freq(chan)
-#define ieee80211_freq_to_hr_chan(freq) ieee80211_freq_to_dsss_chan(freq)
-
-/* Convert IEEE802.11 ERP channel to frequency (MHz) and back
- * Ref IEEE 802.11-2007 section 19.4.2
- */
-#define ieee80211_erp_chan_to_freq(chan) ieee80211_hr_chan_to_freq(chan)
-#define ieee80211_freq_to_erp_chan(freq) ieee80211_freq_to_hr_chan(freq)
-
-/**
- * ieee80211_ofdm_chan_to_freq - get channel center frequency
- * @s_freq: starting frequency == (dotChannelStartingFactor/2) MHz
- * @channel: the OFDM channel
- *
- * Convert IEEE802.11 OFDM channel to center frequency (MHz)
- * Ref IEEE 802.11-2007 section 17.3.8.3.2
- */
-static inline int ieee80211_ofdm_chan_to_freq(int s_freq, int channel)
-{
-	if ((channel > 0) && (channel <= 200) &&
-	    (s_freq >= 4000))
-		return s_freq + (channel * 5);
-	else
-		return -1;
-}
-
-/**
- * ieee80211_freq_to_ofdm_channel - get channel
- * @s_freq: starting frequency == (dotChannelStartingFactor/2) MHz
- * @freq: the frequency
- *
- * Convert frequency (MHz) to IEEE802.11 OFDM channel
- * Ref IEEE 802.11-2007 section 17.3.8.3.2
- *
- * This routine selects the channel with the closest center frequency.
- */
-static inline int ieee80211_freq_to_ofdm_chan(int s_freq, int freq)
-{
-	if ((freq > (s_freq + 2)) && (freq <= (s_freq + 1202)) &&
-	    (s_freq >= 4000))
-		return (freq + 2 - s_freq) / 5;
-	else
-		return -1;
-}
-
-/**
- * ieee80211_tu_to_usec - convert time units (TU) to microseconds
- * @tu: the TUs
- */
-static inline unsigned long ieee80211_tu_to_usec(unsigned long tu)
-{
-	return 1024 * tu;
-}
-
-/**
- * ieee80211_check_tim - check if AID bit is set in TIM
- * @tim: the TIM IE
- * @tim_len: length of the TIM IE
- * @aid: the AID to look for
- */
-static inline bool ieee80211_check_tim(struct ieee80211_tim_ie *tim,
-				       u8 tim_len, u16 aid)
-{
-	u8 mask;
-	u8 index, indexn1, indexn2;
-
-	if (unlikely(!tim || tim_len < sizeof(*tim)))
-		return false;
-
-	aid &= 0x3fff;
-	index = aid / 8;
-	mask  = 1 << (aid & 7);
-
-	indexn1 = tim->bitmap_ctrl & 0xfe;
-	indexn2 = tim_len + indexn1 - 4;
-
-	if (index < indexn1 || index > indexn2)
-		return false;
-
-	index -= indexn1;
-
-	return !!(tim->virtual_map[index] & mask);
-}
-
-#endif /* LINUX_IEEE80211_H */
diff --git a/ANDROID_3.4.5/include/linux/if.h b/ANDROID_3.4.5/include/linux/if.h
deleted file mode 100644
index f995c663..00000000
--- a/ANDROID_3.4.5/include/linux/if.h
+++ /dev/null
@@ -1,233 +0,0 @@
-/*
- * INET		An implementation of the TCP/IP protocol suite for the LINUX
- *		operating system.  INET is implemented using the  BSD Socket
- *		interface as the means of communication with the user level.
- *
- *		Global definitions for the INET interface module.
- *
- * Version:	@(#)if.h	1.0.2	04/18/93
- *
- * Authors:	Original taken from Berkeley UNIX 4.3, (c) UCB 1982-1988
- *		Ross Biro
- *		Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
- *
- *		This program is free software; you can redistribute it and/or
- *		modify it under the terms of the GNU General Public License
- *		as published by the Free Software Foundation; either version
- *		2 of the License, or (at your option) any later version.
- */
-#ifndef _LINUX_IF_H
-#define _LINUX_IF_H
-
-#include <linux/types.h>		/* for "__kernel_caddr_t" et al	*/
-#include <linux/socket.h>		/* for "struct sockaddr" et al	*/
-#include <linux/compiler.h>		/* for "__user" et al           */
-
-#define	IFNAMSIZ	16
-#define	IFALIASZ	256
-#include <linux/hdlc/ioctl.h>
-
-/* Standard interface flags (netdevice->flags). */
-#define	IFF_UP		0x1		/* interface is up		*/
-#define	IFF_BROADCAST	0x2		/* broadcast address valid	*/
-#define	IFF_DEBUG	0x4		/* turn on debugging		*/
-#define	IFF_LOOPBACK	0x8		/* is a loopback net		*/
-#define	IFF_POINTOPOINT	0x10		/* interface is has p-p link	*/
-#define	IFF_NOTRAILERS	0x20		/* avoid use of trailers	*/
-#define	IFF_RUNNING	0x40		/* interface RFC2863 OPER_UP	*/
-#define	IFF_NOARP	0x80		/* no ARP protocol		*/
-#define	IFF_PROMISC	0x100		/* receive all packets		*/
-#define	IFF_ALLMULTI	0x200		/* receive all multicast packets*/
-
-#define IFF_MASTER	0x400		/* master of a load balancer 	*/
-#define IFF_SLAVE	0x800		/* slave of a load balancer	*/
-
-#define IFF_MULTICAST	0x1000		/* Supports multicast		*/
-
-#define IFF_PORTSEL	0x2000          /* can set media type		*/
-#define IFF_AUTOMEDIA	0x4000		/* auto media select active	*/
-#define IFF_DYNAMIC	0x8000		/* dialup device with changing addresses*/
-
-#define IFF_LOWER_UP	0x10000		/* driver signals L1 up		*/
-#define IFF_DORMANT	0x20000		/* driver signals dormant	*/
-
-#define IFF_ECHO	0x40000		/* echo sent packets		*/
-
-#define IFF_VOLATILE	(IFF_LOOPBACK|IFF_POINTOPOINT|IFF_BROADCAST|IFF_ECHO|\
-		IFF_MASTER|IFF_SLAVE|IFF_RUNNING|IFF_LOWER_UP|IFF_DORMANT)
-
-/* Private (from user) interface flags (netdevice->priv_flags). */
-#define IFF_802_1Q_VLAN 0x1             /* 802.1Q VLAN device.          */
-#define IFF_EBRIDGE	0x2		/* Ethernet bridging device.	*/
-#define IFF_SLAVE_INACTIVE	0x4	/* bonding slave not the curr. active */
-#define IFF_MASTER_8023AD	0x8	/* bonding master, 802.3ad. 	*/
-#define IFF_MASTER_ALB	0x10		/* bonding master, balance-alb.	*/
-#define IFF_BONDING	0x20		/* bonding master or slave	*/
-#define IFF_SLAVE_NEEDARP 0x40		/* need ARPs for validation	*/
-#define IFF_ISATAP	0x80		/* ISATAP interface (RFC4214)	*/
-#define IFF_MASTER_ARPMON 0x100		/* bonding master, ARP mon in use */
-#define IFF_WAN_HDLC	0x200		/* WAN HDLC device		*/
-#define IFF_XMIT_DST_RELEASE 0x400	/* dev_hard_start_xmit() is allowed to
-					 * release skb->dst
-					 */
-#define IFF_DONT_BRIDGE 0x800		/* disallow bridging this ether dev */
-#define IFF_DISABLE_NETPOLL	0x1000	/* disable netpoll at run-time */
-#define IFF_MACVLAN_PORT	0x2000	/* device used as macvlan port */
-#define IFF_BRIDGE_PORT	0x4000		/* device used as bridge port */
-#define IFF_OVS_DATAPATH	0x8000	/* device used as Open vSwitch
-					 * datapath port */
-#define IFF_TX_SKB_SHARING	0x10000	/* The interface supports sharing
-					 * skbs on transmit */
-#define IFF_UNICAST_FLT	0x20000		/* Supports unicast filtering	*/
-#define IFF_TEAM_PORT	0x40000		/* device used as team port */
-#define IFF_SUPP_NOFCS	0x80000		/* device supports sending custom FCS */
-
-
-#define IF_GET_IFACE	0x0001		/* for querying only */
-#define IF_GET_PROTO	0x0002
-
-/* For definitions see hdlc.h */
-#define IF_IFACE_V35	0x1000		/* V.35 serial interface	*/
-#define IF_IFACE_V24	0x1001		/* V.24 serial interface	*/
-#define IF_IFACE_X21	0x1002		/* X.21 serial interface	*/
-#define IF_IFACE_T1	0x1003		/* T1 telco serial interface	*/
-#define IF_IFACE_E1	0x1004		/* E1 telco serial interface	*/
-#define IF_IFACE_SYNC_SERIAL 0x1005	/* can't be set by software	*/
-#define IF_IFACE_X21D   0x1006          /* X.21 Dual Clocking (FarSite) */
-
-/* For definitions see hdlc.h */
-#define IF_PROTO_HDLC	0x2000		/* raw HDLC protocol		*/
-#define IF_PROTO_PPP	0x2001		/* PPP protocol			*/
-#define IF_PROTO_CISCO	0x2002		/* Cisco HDLC protocol		*/
-#define IF_PROTO_FR	0x2003		/* Frame Relay protocol		*/
-#define IF_PROTO_FR_ADD_PVC 0x2004	/*    Create FR PVC		*/
-#define IF_PROTO_FR_DEL_PVC 0x2005	/*    Delete FR PVC		*/
-#define IF_PROTO_X25	0x2006		/* X.25				*/
-#define IF_PROTO_HDLC_ETH 0x2007	/* raw HDLC, Ethernet emulation	*/
-#define IF_PROTO_FR_ADD_ETH_PVC 0x2008	/*  Create FR Ethernet-bridged PVC */
-#define IF_PROTO_FR_DEL_ETH_PVC 0x2009	/*  Delete FR Ethernet-bridged PVC */
-#define IF_PROTO_FR_PVC	0x200A		/* for reading PVC status	*/
-#define IF_PROTO_FR_ETH_PVC 0x200B
-#define IF_PROTO_RAW    0x200C          /* RAW Socket                   */
-
-/* RFC 2863 operational status */
-enum {
-	IF_OPER_UNKNOWN,
-	IF_OPER_NOTPRESENT,
-	IF_OPER_DOWN,
-	IF_OPER_LOWERLAYERDOWN,
-	IF_OPER_TESTING,
-	IF_OPER_DORMANT,
-	IF_OPER_UP,
-};
-
-/* link modes */
-enum {
-	IF_LINK_MODE_DEFAULT,
-	IF_LINK_MODE_DORMANT,	/* limit upward transition to dormant */
-};
-
-/*
- *	Device mapping structure. I'd just gone off and designed a 
- *	beautiful scheme using only loadable modules with arguments
- *	for driver options and along come the PCMCIA people 8)
- *
- *	Ah well. The get() side of this is good for WDSETUP, and it'll
- *	be handy for debugging things. The set side is fine for now and
- *	being very small might be worth keeping for clean configuration.
- */
-
-struct ifmap {
-	unsigned long mem_start;
-	unsigned long mem_end;
-	unsigned short base_addr; 
-	unsigned char irq;
-	unsigned char dma;
-	unsigned char port;
-	/* 3 bytes spare */
-};
-
-struct if_settings {
-	unsigned int type;	/* Type of physical device or protocol */
-	unsigned int size;	/* Size of the data allocated by the caller */
-	union {
-		/* {atm/eth/dsl}_settings anyone ? */
-		raw_hdlc_proto		__user *raw_hdlc;
-		cisco_proto		__user *cisco;
-		fr_proto		__user *fr;
-		fr_proto_pvc		__user *fr_pvc;
-		fr_proto_pvc_info	__user *fr_pvc_info;
-
-		/* interface settings */
-		sync_serial_settings	__user *sync;
-		te1_settings		__user *te1;
-	} ifs_ifsu;
-};
-
-/*
- * Interface request structure used for socket
- * ioctl's.  All interface ioctl's must have parameter
- * definitions which begin with ifr_name.  The
- * remainder may be interface specific.
- */
-
-struct ifreq {
-#define IFHWADDRLEN	6
-	union
-	{
-		char	ifrn_name[IFNAMSIZ];		/* if name, e.g. "en0" */
-	} ifr_ifrn;
-	
-	union {
-		struct	sockaddr ifru_addr;
-		struct	sockaddr ifru_dstaddr;
-		struct	sockaddr ifru_broadaddr;
-		struct	sockaddr ifru_netmask;
-		struct  sockaddr ifru_hwaddr;
-		short	ifru_flags;
-		int	ifru_ivalue;
-		int	ifru_mtu;
-		struct  ifmap ifru_map;
-		char	ifru_slave[IFNAMSIZ];	/* Just fits the size */
-		char	ifru_newname[IFNAMSIZ];
-		void __user *	ifru_data;
-		struct	if_settings ifru_settings;
-	} ifr_ifru;
-};
-
-#define ifr_name	ifr_ifrn.ifrn_name	/* interface name 	*/
-#define ifr_hwaddr	ifr_ifru.ifru_hwaddr	/* MAC address 		*/
-#define	ifr_addr	ifr_ifru.ifru_addr	/* address		*/
-#define	ifr_dstaddr	ifr_ifru.ifru_dstaddr	/* other end of p-p lnk	*/
-#define	ifr_broadaddr	ifr_ifru.ifru_broadaddr	/* broadcast address	*/
-#define	ifr_netmask	ifr_ifru.ifru_netmask	/* interface net mask	*/
-#define	ifr_flags	ifr_ifru.ifru_flags	/* flags		*/
-#define	ifr_metric	ifr_ifru.ifru_ivalue	/* metric		*/
-#define	ifr_mtu		ifr_ifru.ifru_mtu	/* mtu			*/
-#define ifr_map		ifr_ifru.ifru_map	/* device map		*/
-#define ifr_slave	ifr_ifru.ifru_slave	/* slave device		*/
-#define	ifr_data	ifr_ifru.ifru_data	/* for use by interface	*/
-#define ifr_ifindex	ifr_ifru.ifru_ivalue	/* interface index	*/
-#define ifr_bandwidth	ifr_ifru.ifru_ivalue    /* link bandwidth	*/
-#define ifr_qlen	ifr_ifru.ifru_ivalue	/* Queue length 	*/
-#define ifr_newname	ifr_ifru.ifru_newname	/* New name		*/
-#define ifr_settings	ifr_ifru.ifru_settings	/* Device/proto settings*/
-
-/*
- * Structure used in SIOCGIFCONF request.
- * Used to retrieve interface configuration
- * for machine (useful for programs which
- * must know all networks accessible).
- */
-
-struct ifconf  {
-	int	ifc_len;			/* size of buffer	*/
-	union {
-		char __user *ifcu_buf;
-		struct ifreq __user *ifcu_req;
-	} ifc_ifcu;
-};
-#define	ifc_buf	ifc_ifcu.ifcu_buf		/* buffer address	*/
-#define	ifc_req	ifc_ifcu.ifcu_req		/* array of structures	*/
-
-#endif /* _LINUX_IF_H */
diff --git a/ANDROID_3.4.5/include/linux/if_addr.h b/ANDROID_3.4.5/include/linux/if_addr.h
deleted file mode 100644
index 23357ab8..00000000
--- a/ANDROID_3.4.5/include/linux/if_addr.h
+++ /dev/null
@@ -1,61 +0,0 @@
-#ifndef __LINUX_IF_ADDR_H
-#define __LINUX_IF_ADDR_H
-
-#include <linux/types.h>
-#include <linux/netlink.h>
-
-struct ifaddrmsg {
-	__u8		ifa_family;
-	__u8		ifa_prefixlen;	/* The prefix length		*/
-	__u8		ifa_flags;	/* Flags			*/
-	__u8		ifa_scope;	/* Address scope		*/
-	__u32		ifa_index;	/* Link index			*/
-};
-
-/*
- * Important comment:
- * IFA_ADDRESS is prefix address, rather than local interface address.
- * It makes no difference for normally configured broadcast interfaces,
- * but for point-to-point IFA_ADDRESS is DESTINATION address,
- * local address is supplied in IFA_LOCAL attribute.
- */
-enum {
-	IFA_UNSPEC,
-	IFA_ADDRESS,
-	IFA_LOCAL,
-	IFA_LABEL,
-	IFA_BROADCAST,
-	IFA_ANYCAST,
-	IFA_CACHEINFO,
-	IFA_MULTICAST,
-	__IFA_MAX,
-};
-
-#define IFA_MAX (__IFA_MAX - 1)
-
-/* ifa_flags */
-#define IFA_F_SECONDARY		0x01
-#define IFA_F_TEMPORARY		IFA_F_SECONDARY
-
-#define	IFA_F_NODAD		0x02
-#define IFA_F_OPTIMISTIC	0x04
-#define IFA_F_DADFAILED		0x08
-#define	IFA_F_HOMEADDRESS	0x10
-#define IFA_F_DEPRECATED	0x20
-#define IFA_F_TENTATIVE		0x40
-#define IFA_F_PERMANENT		0x80
-
-struct ifa_cacheinfo {
-	__u32	ifa_prefered;
-	__u32	ifa_valid;
-	__u32	cstamp; /* created timestamp, hundredths of seconds */
-	__u32	tstamp; /* updated timestamp, hundredths of seconds */
-};
-
-/* backwards compatibility for userspace */
-#ifndef __KERNEL__
-#define IFA_RTA(r)  ((struct rtattr*)(((char*)(r)) + NLMSG_ALIGN(sizeof(struct ifaddrmsg))))
-#define IFA_PAYLOAD(n) NLMSG_PAYLOAD(n,sizeof(struct ifaddrmsg))
-#endif
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/if_addrlabel.h b/ANDROID_3.4.5/include/linux/if_addrlabel.h
deleted file mode 100644
index 54580c29..00000000
--- a/ANDROID_3.4.5/include/linux/if_addrlabel.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * if_addrlabel.h - netlink interface for address labels
- *
- * Copyright (C)2007 USAGI/WIDE Project,  All Rights Reserved.
- *
- * Authors:
- *	YOSHIFUJI Hideaki @ USAGI/WIDE <yoshfuji@linux-ipv6.org>
- */
-
-#ifndef __LINUX_IF_ADDRLABEL_H
-#define __LINUX_IF_ADDRLABEL_H
-
-#include <linux/types.h>
-
-struct ifaddrlblmsg {
-	__u8		ifal_family;		/* Address family */
-	__u8		__ifal_reserved;	/* Reserved */
-	__u8		ifal_prefixlen;		/* Prefix length */
-	__u8		ifal_flags;		/* Flags */
-	__u32		ifal_index;		/* Link index */
-	__u32		ifal_seq;		/* sequence number */
-};
-
-enum {
-	IFAL_ADDRESS = 1,
-	IFAL_LABEL = 2,
-	__IFAL_MAX
-};
-
-#define IFAL_MAX	(__IFAL_MAX - 1)
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/if_alg.h b/ANDROID_3.4.5/include/linux/if_alg.h
deleted file mode 100644
index 0f9acce5..00000000
--- a/ANDROID_3.4.5/include/linux/if_alg.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- * if_alg: User-space algorithm interface
- *
- * Copyright (c) 2010 Herbert Xu <herbert@gondor.apana.org.au>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the Free
- * Software Foundation; either version 2 of the License, or (at your option)
- * any later version.
- *
- */
-
-#ifndef _LINUX_IF_ALG_H
-#define _LINUX_IF_ALG_H
-
-#include <linux/types.h>
-
-struct sockaddr_alg {
-	__u16	salg_family;
-	__u8	salg_type[14];
-	__u32	salg_feat;
-	__u32	salg_mask;
-	__u8	salg_name[64];
-};
-
-struct af_alg_iv {
-	__u32	ivlen;
-	__u8	iv[0];
-};
-
-/* Socket options */
-#define ALG_SET_KEY			1
-#define ALG_SET_IV			2
-#define ALG_SET_OP			3
-
-/* Operations */
-#define ALG_OP_DECRYPT			0
-#define ALG_OP_ENCRYPT			1
-
-#endif	/* _LINUX_IF_ALG_H */
diff --git a/ANDROID_3.4.5/include/linux/if_arcnet.h b/ANDROID_3.4.5/include/linux/if_arcnet.h
deleted file mode 100644
index 46e34bd0..00000000
--- a/ANDROID_3.4.5/include/linux/if_arcnet.h
+++ /dev/null
@@ -1,132 +0,0 @@
-/*
- * INET         An implementation of the TCP/IP protocol suite for the LINUX
- *              operating system.  INET is implemented using the  BSD Socket
- *              interface as the means of communication with the user level.
- *
- *              Global definitions for the ARCnet interface.
- *
- * Authors:     David Woodhouse and Avery Pennarun
- *
- *              This program is free software; you can redistribute it and/or
- *              modify it under the terms of the GNU General Public License
- *              as published by the Free Software Foundation; either version
- *              2 of the License, or (at your option) any later version.
- */
-
-#ifndef _LINUX_IF_ARCNET_H
-#define _LINUX_IF_ARCNET_H
-
-#include <linux/types.h>
-#include <linux/if_ether.h>
-
-
-/*
- *    These are the defined ARCnet Protocol ID's.
- */
-
-/* CAP mode */
-/* No macro but uses 1-8 */
-
-/* RFC1201 Protocol ID's */
-#define ARC_P_IP		212	/* 0xD4 */
-#define ARC_P_IPV6		196	/* 0xC4: RFC2497 */
-#define ARC_P_ARP		213	/* 0xD5 */
-#define ARC_P_RARP		214	/* 0xD6 */
-#define ARC_P_IPX		250	/* 0xFA */
-#define ARC_P_NOVELL_EC		236	/* 0xEC */
-
-/* Old RFC1051 Protocol ID's */
-#define ARC_P_IP_RFC1051	240	/* 0xF0 */
-#define ARC_P_ARP_RFC1051	241	/* 0xF1 */
-
-/* MS LanMan/WfWg "NDIS" encapsulation */
-#define ARC_P_ETHER		232	/* 0xE8 */
-
-/* Unsupported/indirectly supported protocols */
-#define ARC_P_DATAPOINT_BOOT	0	/* very old Datapoint equipment */
-#define ARC_P_DATAPOINT_MOUNT	1
-#define ARC_P_POWERLAN_BEACON	8	/* Probably ATA-Netbios related */
-#define ARC_P_POWERLAN_BEACON2	243	/* 0xF3 */
-#define ARC_P_LANSOFT		251	/* 0xFB - what is this? */
-#define ARC_P_ATALK		0xDD
-
-/* Hardware address length */
-#define ARCNET_ALEN	1
-
-/*
- * The RFC1201-specific components of an arcnet packet header.
- */
-struct arc_rfc1201 {
-    __u8  proto;		/* protocol ID field - varies		*/
-    __u8  split_flag;	/* for use with split packets		*/
-    __be16   sequence;		/* sequence number			*/
-    __u8  payload[0];	/* space remaining in packet (504 bytes)*/
-};
-#define RFC1201_HDR_SIZE 4
-
-
-/*
- * The RFC1051-specific components.
- */
-struct arc_rfc1051 {
-    __u8 proto;		/* ARC_P_RFC1051_ARP/RFC1051_IP	*/
-    __u8 payload[0];		/* 507 bytes			*/
-};
-#define RFC1051_HDR_SIZE 1
-
-
-/*
- * The ethernet-encap-specific components.  We have a real ethernet header
- * and some data.
- */
-struct arc_eth_encap {
-    __u8 proto;		/* Always ARC_P_ETHER			*/
-    struct ethhdr eth;		/* standard ethernet header (yuck!)	*/
-    __u8 payload[0];		/* 493 bytes				*/
-};
-#define ETH_ENCAP_HDR_SIZE 14
-
-
-struct arc_cap {
-	__u8 proto;
-	__u8 cookie[sizeof(int)];   /* Actually NOT sent over the network */
-	union {
-		__u8 ack;
-		__u8 raw[0];		/* 507 bytes */
-	} mes;
-};
-
-/*
- * The data needed by the actual arcnet hardware.
- *
- * Now, in the real arcnet hardware, the third and fourth bytes are the
- * 'offset' specification instead of the length, and the soft data is at
- * the _end_ of the 512-byte buffer.  We hide this complexity inside the
- * driver.
- */
-struct arc_hardware {
-    __u8  source,		/* source ARCnet - filled in automagically */
-             dest,		/* destination ARCnet - 0 for broadcast    */
-    	     offset[2];		/* offset bytes (some weird semantics)     */
-};
-#define ARC_HDR_SIZE 4
-
-/*
- * This is an ARCnet frame header, as seen by the kernel (and userspace,
- * when you do a raw packet capture).
- */
-struct archdr {
-    /* hardware requirements */
-    struct arc_hardware hard;
-     
-    /* arcnet encapsulation-specific bits */
-    union {
-	struct arc_rfc1201   rfc1201;
-	struct arc_rfc1051   rfc1051;
-	struct arc_eth_encap eth_encap;
-	struct arc_cap       cap;
-	__u8 raw[0];		/* 508 bytes				*/
-    } soft;
-};
-
-#endif				/* _LINUX_IF_ARCNET_H */
diff --git a/ANDROID_3.4.5/include/linux/if_arp.h b/ANDROID_3.4.5/include/linux/if_arp.h
deleted file mode 100644
index 6d722f41..00000000
--- a/ANDROID_3.4.5/include/linux/if_arp.h
+++ /dev/null
@@ -1,171 +0,0 @@
-/*
- * INET		An implementation of the TCP/IP protocol suite for the LINUX
- *		operating system.  INET is implemented using the  BSD Socket
- *		interface as the means of communication with the user level.
- *
- *		Global definitions for the ARP (RFC 826) protocol.
- *
- * Version:	@(#)if_arp.h	1.0.1	04/16/93
- *
- * Authors:	Original taken from Berkeley UNIX 4.3, (c) UCB 1986-1988
- *		Portions taken from the KA9Q/NOS (v2.00m PA0GRI) source.
- *		Ross Biro
- *		Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
- *		Florian La Roche,
- *		Jonathan Layes <layes@loran.com>
- *		Arnaldo Carvalho de Melo <acme@conectiva.com.br> ARPHRD_HWX25
- *
- *		This program is free software; you can redistribute it and/or
- *		modify it under the terms of the GNU General Public License
- *		as published by the Free Software Foundation; either version
- *		2 of the License, or (at your option) any later version.
- */
-#ifndef _LINUX_IF_ARP_H
-#define _LINUX_IF_ARP_H
-
-#include <linux/netdevice.h>
-
-/* ARP protocol HARDWARE identifiers. */
-#define ARPHRD_NETROM	0		/* from KA9Q: NET/ROM pseudo	*/
-#define ARPHRD_ETHER 	1		/* Ethernet 10Mbps		*/
-#define	ARPHRD_EETHER	2		/* Experimental Ethernet	*/
-#define	ARPHRD_AX25	3		/* AX.25 Level 2		*/
-#define	ARPHRD_PRONET	4		/* PROnet token ring		*/
-#define	ARPHRD_CHAOS	5		/* Chaosnet			*/
-#define	ARPHRD_IEEE802	6		/* IEEE 802.2 Ethernet/TR/TB	*/
-#define	ARPHRD_ARCNET	7		/* ARCnet			*/
-#define	ARPHRD_APPLETLK	8		/* APPLEtalk			*/
-#define ARPHRD_DLCI	15		/* Frame Relay DLCI		*/
-#define ARPHRD_ATM	19		/* ATM 				*/
-#define ARPHRD_METRICOM	23		/* Metricom STRIP (new IANA id)	*/
-#define	ARPHRD_IEEE1394	24		/* IEEE 1394 IPv4 - RFC 2734	*/
-#define ARPHRD_EUI64	27		/* EUI-64                       */
-#define ARPHRD_INFINIBAND 32		/* InfiniBand			*/
-
-/* Dummy types for non ARP hardware */
-#define ARPHRD_SLIP	256
-#define ARPHRD_CSLIP	257
-#define ARPHRD_SLIP6	258
-#define ARPHRD_CSLIP6	259
-#define ARPHRD_RSRVD	260		/* Notional KISS type 		*/
-#define ARPHRD_ADAPT	264
-#define ARPHRD_ROSE	270
-#define ARPHRD_X25	271		/* CCITT X.25			*/
-#define ARPHRD_HWX25	272		/* Boards with X.25 in firmware	*/
-#define ARPHRD_CAN	280		/* Controller Area Network      */
-#define ARPHRD_PPP	512
-#define ARPHRD_CISCO	513		/* Cisco HDLC	 		*/
-#define ARPHRD_HDLC	ARPHRD_CISCO
-#define ARPHRD_LAPB	516		/* LAPB				*/
-#define ARPHRD_DDCMP    517		/* Digital's DDCMP protocol     */
-#define ARPHRD_RAWHDLC	518		/* Raw HDLC			*/
-
-#define ARPHRD_TUNNEL	768		/* IPIP tunnel			*/
-#define ARPHRD_TUNNEL6	769		/* IP6IP6 tunnel       		*/
-#define ARPHRD_FRAD	770             /* Frame Relay Access Device    */
-#define ARPHRD_SKIP	771		/* SKIP vif			*/
-#define ARPHRD_LOOPBACK	772		/* Loopback device		*/
-#define ARPHRD_LOCALTLK 773		/* Localtalk device		*/
-#define ARPHRD_FDDI	774		/* Fiber Distributed Data Interface */
-#define ARPHRD_BIF      775             /* AP1000 BIF                   */
-#define ARPHRD_SIT	776		/* sit0 device - IPv6-in-IPv4	*/
-#define ARPHRD_IPDDP	777		/* IP over DDP tunneller	*/
-#define ARPHRD_IPGRE	778		/* GRE over IP			*/
-#define ARPHRD_PIMREG	779		/* PIMSM register interface	*/
-#define ARPHRD_HIPPI	780		/* High Performance Parallel Interface */
-#define ARPHRD_ASH	781		/* Nexus 64Mbps Ash		*/
-#define ARPHRD_ECONET	782		/* Acorn Econet			*/
-#define ARPHRD_IRDA 	783		/* Linux-IrDA			*/
-/* ARP works differently on different FC media .. so  */
-#define ARPHRD_FCPP	784		/* Point to point fibrechannel	*/
-#define ARPHRD_FCAL	785		/* Fibrechannel arbitrated loop */
-#define ARPHRD_FCPL	786		/* Fibrechannel public loop	*/
-#define ARPHRD_FCFABRIC	787		/* Fibrechannel fabric		*/
-	/* 787->799 reserved for fibrechannel media types */
-#define ARPHRD_IEEE802_TR 800		/* Magic type ident for TR	*/
-#define ARPHRD_IEEE80211 801		/* IEEE 802.11			*/
-#define ARPHRD_IEEE80211_PRISM 802	/* IEEE 802.11 + Prism2 header  */
-#define ARPHRD_IEEE80211_RADIOTAP 803	/* IEEE 802.11 + radiotap header */
-#define ARPHRD_IEEE802154	  804
-
-#define ARPHRD_PHONET	820		/* PhoNet media type		*/
-#define ARPHRD_PHONET_PIPE 821		/* PhoNet pipe header		*/
-#define ARPHRD_CAIF	822		/* CAIF media type		*/
-
-#define ARPHRD_VOID	  0xFFFF	/* Void type, nothing is known */
-#define ARPHRD_NONE	  0xFFFE	/* zero header length */
-
-/* ARP protocol opcodes. */
-#define	ARPOP_REQUEST	1		/* ARP request			*/
-#define	ARPOP_REPLY	2		/* ARP reply			*/
-#define	ARPOP_RREQUEST	3		/* RARP request			*/
-#define	ARPOP_RREPLY	4		/* RARP reply			*/
-#define	ARPOP_InREQUEST	8		/* InARP request		*/
-#define	ARPOP_InREPLY	9		/* InARP reply			*/
-#define	ARPOP_NAK	10		/* (ATM)ARP NAK			*/
-
-
-/* ARP ioctl request. */
-struct arpreq {
-  struct sockaddr	arp_pa;		/* protocol address		*/
-  struct sockaddr	arp_ha;		/* hardware address		*/
-  int			arp_flags;	/* flags			*/
-  struct sockaddr       arp_netmask;    /* netmask (only for proxy arps) */
-  char			arp_dev[16];
-};
-
-struct arpreq_old {
-  struct sockaddr	arp_pa;		/* protocol address		*/
-  struct sockaddr	arp_ha;		/* hardware address		*/
-  int			arp_flags;	/* flags			*/
-  struct sockaddr       arp_netmask;    /* netmask (only for proxy arps) */
-};
-
-/* ARP Flag values. */
-#define ATF_COM		0x02		/* completed entry (ha valid)	*/
-#define	ATF_PERM	0x04		/* permanent entry		*/
-#define	ATF_PUBL	0x08		/* publish entry		*/
-#define	ATF_USETRAILERS	0x10		/* has requested trailers	*/
-#define ATF_NETMASK     0x20            /* want to use a netmask (only
-					   for proxy entries) */
-#define ATF_DONTPUB	0x40		/* don't answer this addresses	*/
-
-/*
- *	This structure defines an ethernet arp header.
- */
-
-struct arphdr {
-	__be16		ar_hrd;		/* format of hardware address	*/
-	__be16		ar_pro;		/* format of protocol address	*/
-	unsigned char	ar_hln;		/* length of hardware address	*/
-	unsigned char	ar_pln;		/* length of protocol address	*/
-	__be16		ar_op;		/* ARP opcode (command)		*/
-
-#if 0
-	 /*
-	  *	 Ethernet looks like this : This bit is variable sized however...
-	  */
-	unsigned char		ar_sha[ETH_ALEN];	/* sender hardware address	*/
-	unsigned char		ar_sip[4];		/* sender IP address		*/
-	unsigned char		ar_tha[ETH_ALEN];	/* target hardware address	*/
-	unsigned char		ar_tip[4];		/* target IP address		*/
-#endif
-
-};
-
-#ifdef __KERNEL__
-#include <linux/skbuff.h>
-
-static inline struct arphdr *arp_hdr(const struct sk_buff *skb)
-{
-	return (struct arphdr *)skb_network_header(skb);
-}
-
-static inline int arp_hdr_len(struct net_device *dev)
-{
-	/* ARP header, plus 2 device addresses, plus 2 IP addresses. */
-	return sizeof(struct arphdr) + (dev->addr_len + sizeof(u32)) * 2;
-}
-#endif
-
-#endif	/* _LINUX_IF_ARP_H */
diff --git a/ANDROID_3.4.5/include/linux/if_bonding.h b/ANDROID_3.4.5/include/linux/if_bonding.h
deleted file mode 100644
index a17edda8..00000000
--- a/ANDROID_3.4.5/include/linux/if_bonding.h
+++ /dev/null
@@ -1,128 +0,0 @@
-/*
- * Bond several ethernet interfaces into a Cisco, running 'Etherchannel'.
- *
- *
- * Portions are (c) Copyright 1995 Simon "Guru Aleph-Null" Janes
- * NCM: Network and Communications Management, Inc.
- *
- * BUT, I'm the one who modified it for ethernet, so:
- * (c) Copyright 1999, Thomas Davis, tadavis@lbl.gov
- *
- *	This software may be used and distributed according to the terms
- *	of the GNU Public License, incorporated herein by reference.
- *
- * 2003/03/18 - Amir Noam <amir.noam at intel dot com>
- *	- Added support for getting slave's speed and duplex via ethtool.
- *	  Needed for 802.3ad and other future modes.
- *
- * 2003/03/18 - Tsippy Mendelson <tsippy.mendelson at intel dot com> and
- *		Shmulik Hen <shmulik.hen at intel dot com>
- *	- Enable support of modes that need to use the unique mac address of
- *	  each slave.
- *
- * 2003/03/18 - Tsippy Mendelson <tsippy.mendelson at intel dot com> and
- *		Amir Noam <amir.noam at intel dot com>
- *	- Moved driver's private data types to bonding.h
- *
- * 2003/03/18 - Amir Noam <amir.noam at intel dot com>,
- *		Tsippy Mendelson <tsippy.mendelson at intel dot com> and
- *		Shmulik Hen <shmulik.hen at intel dot com>
- *	- Added support for IEEE 802.3ad Dynamic link aggregation mode.
- *
- * 2003/05/01 - Amir Noam <amir.noam at intel dot com>
- *	- Added ABI version control to restore compatibility between
- *	  new/old ifenslave and new/old bonding.
- *
- * 2003/12/01 - Shmulik Hen <shmulik.hen at intel dot com>
- *	- Code cleanup and style changes
- *
- * 2005/05/05 - Jason Gabler <jygabler at lbl dot gov>
- *      - added definitions for various XOR hashing policies
- */
-
-#ifndef _LINUX_IF_BONDING_H
-#define _LINUX_IF_BONDING_H
-
-#include <linux/if.h>
-#include <linux/types.h>
-#include <linux/if_ether.h>
-
-/* userland - kernel ABI version (2003/05/08) */
-#define BOND_ABI_VERSION 2
-
-/*
- * We can remove these ioctl definitions in 2.5.  People should use the
- * SIOC*** versions of them instead
- */
-#define BOND_ENSLAVE_OLD		(SIOCDEVPRIVATE)
-#define BOND_RELEASE_OLD		(SIOCDEVPRIVATE + 1)
-#define BOND_SETHWADDR_OLD		(SIOCDEVPRIVATE + 2)
-#define BOND_SLAVE_INFO_QUERY_OLD	(SIOCDEVPRIVATE + 11)
-#define BOND_INFO_QUERY_OLD		(SIOCDEVPRIVATE + 12)
-#define BOND_CHANGE_ACTIVE_OLD		(SIOCDEVPRIVATE + 13)
-
-#define BOND_CHECK_MII_STATUS	(SIOCGMIIPHY)
-
-#define BOND_MODE_ROUNDROBIN	0
-#define BOND_MODE_ACTIVEBACKUP	1
-#define BOND_MODE_XOR		2
-#define BOND_MODE_BROADCAST	3
-#define BOND_MODE_8023AD        4
-#define BOND_MODE_TLB           5
-#define BOND_MODE_ALB		6 /* TLB + RLB (receive load balancing) */
-
-/* each slave's link has 4 states */
-#define BOND_LINK_UP    0           /* link is up and running */
-#define BOND_LINK_FAIL  1           /* link has just gone down */
-#define BOND_LINK_DOWN  2           /* link has been down for too long time */
-#define BOND_LINK_BACK  3           /* link is going back */
-
-/* each slave has several states */
-#define BOND_STATE_ACTIVE       0   /* link is active */
-#define BOND_STATE_BACKUP       1   /* link is backup */
-
-#define BOND_DEFAULT_MAX_BONDS  1   /* Default maximum number of devices to support */
-
-#define BOND_DEFAULT_TX_QUEUES 16   /* Default number of tx queues per device */
-
-#define BOND_DEFAULT_RESEND_IGMP	1 /* Default number of IGMP membership reports */
-
-/* hashing types */
-#define BOND_XMIT_POLICY_LAYER2		0 /* layer 2 (MAC only), default */
-#define BOND_XMIT_POLICY_LAYER34	1 /* layer 3+4 (IP ^ (TCP || UDP)) */
-#define BOND_XMIT_POLICY_LAYER23	2 /* layer 2+3 (IP ^ MAC) */
-
-typedef struct ifbond {
-	__s32 bond_mode;
-	__s32 num_slaves;
-	__s32 miimon;
-} ifbond;
-
-typedef struct ifslave {
-	__s32 slave_id; /* Used as an IN param to the BOND_SLAVE_INFO_QUERY ioctl */
-	char slave_name[IFNAMSIZ];
-	__s8 link;
-	__s8 state;
-	__u32  link_failure_count;
-} ifslave;
-
-struct ad_info {
-	__u16 aggregator_id;
-	__u16 ports;
-	__u16 actor_key;
-	__u16 partner_key;
-	__u8 partner_system[ETH_ALEN];
-};
-
-#endif /* _LINUX_IF_BONDING_H */
-
-/*
- * Local variables:
- *  version-control: t
- *  kept-new-versions: 5
- *  c-indent-level: 8
- *  c-basic-offset: 8
- *  tab-width: 8
- * End:
- */
-
diff --git a/ANDROID_3.4.5/include/linux/if_bridge.h b/ANDROID_3.4.5/include/linux/if_bridge.h
deleted file mode 100644
index dd3f2013..00000000
--- a/ANDROID_3.4.5/include/linux/if_bridge.h
+++ /dev/null
@@ -1,111 +0,0 @@
-/*
- *	Linux ethernet bridge
- *
- *	Authors:
- *	Lennert Buytenhek		<buytenh@gnu.org>
- *
- *	This program is free software; you can redistribute it and/or
- *	modify it under the terms of the GNU General Public License
- *	as published by the Free Software Foundation; either version
- *	2 of the License, or (at your option) any later version.
- */
-
-#ifndef _LINUX_IF_BRIDGE_H
-#define _LINUX_IF_BRIDGE_H
-
-#include <linux/types.h>
-
-#define SYSFS_BRIDGE_ATTR	"bridge"
-#define SYSFS_BRIDGE_FDB	"brforward"
-#define SYSFS_BRIDGE_PORT_SUBDIR "brif"
-#define SYSFS_BRIDGE_PORT_ATTR	"brport"
-#define SYSFS_BRIDGE_PORT_LINK	"bridge"
-
-#define BRCTL_VERSION 1
-
-#define BRCTL_GET_VERSION 0
-#define BRCTL_GET_BRIDGES 1
-#define BRCTL_ADD_BRIDGE 2
-#define BRCTL_DEL_BRIDGE 3
-#define BRCTL_ADD_IF 4
-#define BRCTL_DEL_IF 5
-#define BRCTL_GET_BRIDGE_INFO 6
-#define BRCTL_GET_PORT_LIST 7
-#define BRCTL_SET_BRIDGE_FORWARD_DELAY 8
-#define BRCTL_SET_BRIDGE_HELLO_TIME 9
-#define BRCTL_SET_BRIDGE_MAX_AGE 10
-#define BRCTL_SET_AGEING_TIME 11
-#define BRCTL_SET_GC_INTERVAL 12
-#define BRCTL_GET_PORT_INFO 13
-#define BRCTL_SET_BRIDGE_STP_STATE 14
-#define BRCTL_SET_BRIDGE_PRIORITY 15
-#define BRCTL_SET_PORT_PRIORITY 16
-#define BRCTL_SET_PATH_COST 17
-#define BRCTL_GET_FDB_ENTRIES 18
-
-#define BR_STATE_DISABLED 0
-#define BR_STATE_LISTENING 1
-#define BR_STATE_LEARNING 2
-#define BR_STATE_FORWARDING 3
-#define BR_STATE_BLOCKING 4
-
-struct __bridge_info {
-	__u64 designated_root;
-	__u64 bridge_id;
-	__u32 root_path_cost;
-	__u32 max_age;
-	__u32 hello_time;
-	__u32 forward_delay;
-	__u32 bridge_max_age;
-	__u32 bridge_hello_time;
-	__u32 bridge_forward_delay;
-	__u8 topology_change;
-	__u8 topology_change_detected;
-	__u8 root_port;
-	__u8 stp_enabled;
-	__u32 ageing_time;
-	__u32 gc_interval;
-	__u32 hello_timer_value;
-	__u32 tcn_timer_value;
-	__u32 topology_change_timer_value;
-	__u32 gc_timer_value;
-};
-
-struct __port_info {
-	__u64 designated_root;
-	__u64 designated_bridge;
-	__u16 port_id;
-	__u16 designated_port;
-	__u32 path_cost;
-	__u32 designated_cost;
-	__u8 state;
-	__u8 top_change_ack;
-	__u8 config_pending;
-	__u8 unused0;
-	__u32 message_age_timer_value;
-	__u32 forward_delay_timer_value;
-	__u32 hold_timer_value;
-};
-
-struct __fdb_entry {
-	__u8 mac_addr[6];
-	__u8 port_no;
-	__u8 is_local;
-	__u32 ageing_timer_value;
-	__u8 port_hi;
-	__u8 pad0;
-	__u16 unused;
-};
-
-#ifdef __KERNEL__
-
-#include <linux/netdevice.h>
-
-extern void brioctl_set(int (*ioctl_hook)(struct net *, unsigned int, void __user *));
-
-typedef int br_should_route_hook_t(struct sk_buff *skb);
-extern br_should_route_hook_t __rcu *br_should_route_hook;
-
-#endif
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/if_cablemodem.h b/ANDROID_3.4.5/include/linux/if_cablemodem.h
deleted file mode 100644
index 9ca1007e..00000000
--- a/ANDROID_3.4.5/include/linux/if_cablemodem.h
+++ /dev/null
@@ -1,22 +0,0 @@
-#ifndef _LINUX_CABLEMODEM_H_
-#define _LINUX_CABLEMODEM_H_
-/*
- *		Author: Franco Venturi <fventuri@mediaone.net>
- *		Copyright 1998 Franco Venturi
- *
- *		This program is free software; you can redistribute it
- *		and/or  modify it under  the terms of  the GNU General
- *		Public  License as  published  by  the  Free  Software
- *		Foundation;  either  version 2 of the License, or  (at
- *		your option) any later version.
- */
-
-/* some useful defines for sb1000.c e cmconfig.c - fv */
-#define SIOCGCMSTATS		SIOCDEVPRIVATE+0	/* get cable modem stats */
-#define SIOCGCMFIRMWARE		SIOCDEVPRIVATE+1	/* get cm firmware version */
-#define SIOCGCMFREQUENCY	SIOCDEVPRIVATE+2	/* get cable modem frequency */
-#define SIOCSCMFREQUENCY	SIOCDEVPRIVATE+3	/* set cable modem frequency */
-#define SIOCGCMPIDS			SIOCDEVPRIVATE+4	/* get cable modem PIDs */
-#define SIOCSCMPIDS			SIOCDEVPRIVATE+5	/* set cable modem PIDs */
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/if_ec.h b/ANDROID_3.4.5/include/linux/if_ec.h
deleted file mode 100644
index d85f9f48..00000000
--- a/ANDROID_3.4.5/include/linux/if_ec.h
+++ /dev/null
@@ -1,68 +0,0 @@
-/* Definitions for Econet sockets. */
-
-#ifndef __LINUX_IF_EC
-#define __LINUX_IF_EC
-
-/* User visible stuff. Glibc provides its own but libc5 folk will use these */
-
-struct ec_addr {
-  unsigned char station;		/* Station number.  */
-  unsigned char net;			/* Network number.  */
-};
-
-struct sockaddr_ec {
-  unsigned short sec_family;
-  unsigned char port;			/* Port number.  */
-  unsigned char cb;			/* Control/flag byte.  */
-  unsigned char type;			/* Type of message.  */
-  struct ec_addr addr;
-  unsigned long cookie;
-};
-
-#define ECTYPE_PACKET_RECEIVED		0	/* Packet received */
-#define ECTYPE_TRANSMIT_STATUS		0x10	/* Transmit completed, 
-						   low nibble holds status */
-
-#define ECTYPE_TRANSMIT_OK		1
-#define ECTYPE_TRANSMIT_NOT_LISTENING	2
-#define ECTYPE_TRANSMIT_NET_ERROR	3
-#define ECTYPE_TRANSMIT_NO_CLOCK	4
-#define ECTYPE_TRANSMIT_LINE_JAMMED	5
-#define ECTYPE_TRANSMIT_NOT_PRESENT	6
-
-#ifdef __KERNEL__
-
-#define EC_HLEN				6
-
-/* This is what an Econet frame looks like on the wire. */
-struct ec_framehdr {
-  unsigned char dst_stn;
-  unsigned char dst_net;
-  unsigned char src_stn;
-  unsigned char src_net;
-  unsigned char cb;
-  unsigned char port;
-};
-
-struct econet_sock {
-  /* struct sock has to be the first member of econet_sock */
-  struct sock	sk;
-  unsigned char cb;
-  unsigned char port;
-  unsigned char station;
-  unsigned char net;
-  unsigned short num;
-};
-
-static inline struct econet_sock *ec_sk(const struct sock *sk)
-{
-	return (struct econet_sock *)sk;
-}
-
-struct ec_device {
-  unsigned char station, net;		/* Econet protocol address */
-};
-
-#endif
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/if_eql.h b/ANDROID_3.4.5/include/linux/if_eql.h
deleted file mode 100644
index 18a5d02a..00000000
--- a/ANDROID_3.4.5/include/linux/if_eql.h
+++ /dev/null
@@ -1,83 +0,0 @@
-/*
- * Equalizer Load-balancer for serial network interfaces.
- *
- * (c) Copyright 1995 Simon "Guru Aleph-Null" Janes
- * NCM: Network and Communications Management, Inc.
- *
- *
- *	This software may be used and distributed according to the terms
- *	of the GNU General Public License, incorporated herein by reference.
- * 
- * The author may be reached as simon@ncm.com, or C/O
- *    NCM
- *    Attn: Simon Janes
- *    6803 Whittier Ave
- *    McLean VA 22101
- *    Phone: 1-703-847-0040 ext 103
- */
-
-#ifndef _LINUX_IF_EQL_H
-#define _LINUX_IF_EQL_H
-
-#define EQL_DEFAULT_SLAVE_PRIORITY 28800
-#define EQL_DEFAULT_MAX_SLAVES     4
-#define EQL_DEFAULT_MTU            576
-#define EQL_DEFAULT_RESCHED_IVAL   HZ
-
-#define EQL_ENSLAVE     (SIOCDEVPRIVATE)
-#define EQL_EMANCIPATE  (SIOCDEVPRIVATE + 1)
-
-#define EQL_GETSLAVECFG (SIOCDEVPRIVATE + 2)
-#define EQL_SETSLAVECFG (SIOCDEVPRIVATE + 3)
-
-#define EQL_GETMASTRCFG (SIOCDEVPRIVATE + 4)
-#define EQL_SETMASTRCFG (SIOCDEVPRIVATE + 5)
-
-#ifdef __KERNEL__
-
-#include <linux/timer.h>
-#include <linux/spinlock.h>
-
-typedef struct slave {
-	struct list_head	list;
-	struct net_device	*dev;
-	long			priority;
-	long			priority_bps;
-	long			priority_Bps;
-	long			bytes_queued;
-} slave_t;
-
-typedef struct slave_queue {
-	spinlock_t		lock;
-	struct list_head	all_slaves;
-	int			num_slaves;
-	struct net_device	*master_dev;
-} slave_queue_t;
-
-typedef struct equalizer {
-	slave_queue_t		queue;
-	int			min_slaves;
-	int			max_slaves;
-	struct timer_list	timer;
-} equalizer_t;  
-
-#endif /* __KERNEL__ */
-
-typedef struct master_config {
-	char	master_name[16];
-	int	max_slaves;
-	int	min_slaves;
-} master_config_t;
-
-typedef struct slave_config {
-	char	slave_name[16];
-	long	priority;
-} slave_config_t;
-
-typedef struct slaving_request {
-	char	slave_name[16];
-	long	priority;
-} slaving_request_t;
-
-
-#endif /* _LINUX_EQL_H */
diff --git a/ANDROID_3.4.5/include/linux/if_ether.h b/ANDROID_3.4.5/include/linux/if_ether.h
deleted file mode 100644
index 56d907a2..00000000
--- a/ANDROID_3.4.5/include/linux/if_ether.h
+++ /dev/null
@@ -1,148 +0,0 @@
-/*
- * INET		An implementation of the TCP/IP protocol suite for the LINUX
- *		operating system.  INET is implemented using the  BSD Socket
- *		interface as the means of communication with the user level.
- *
- *		Global definitions for the Ethernet IEEE 802.3 interface.
- *
- * Version:	@(#)if_ether.h	1.0.1a	02/08/94
- *
- * Author:	Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
- *		Donald Becker, <becker@super.org>
- *		Alan Cox, <alan@lxorguk.ukuu.org.uk>
- *		Steve Whitehouse, <gw7rrm@eeshack3.swan.ac.uk>
- *
- *		This program is free software; you can redistribute it and/or
- *		modify it under the terms of the GNU General Public License
- *		as published by the Free Software Foundation; either version
- *		2 of the License, or (at your option) any later version.
- */
-
-#ifndef _LINUX_IF_ETHER_H
-#define _LINUX_IF_ETHER_H
-
-#include <linux/types.h>
-
-/*
- *	IEEE 802.3 Ethernet magic constants.  The frame sizes omit the preamble
- *	and FCS/CRC (frame check sequence).
- */
-
-#define ETH_ALEN	6		/* Octets in one ethernet addr	 */
-#define ETH_HLEN	14		/* Total octets in header.	 */
-#define ETH_ZLEN	60		/* Min. octets in frame sans FCS */
-#define ETH_DATA_LEN	1500		/* Max. octets in payload	 */
-#define ETH_FRAME_LEN	1514		/* Max. octets in frame sans FCS */
-#define ETH_FCS_LEN	4		/* Octets in the FCS		 */
-
-/*
- *	These are the defined Ethernet Protocol ID's.
- */
-
-#define ETH_P_LOOP	0x0060		/* Ethernet Loopback packet	*/
-#define ETH_P_PUP	0x0200		/* Xerox PUP packet		*/
-#define ETH_P_PUPAT	0x0201		/* Xerox PUP Addr Trans packet	*/
-#define ETH_P_IP	0x0800		/* Internet Protocol packet	*/
-#define ETH_P_X25	0x0805		/* CCITT X.25			*/
-#define ETH_P_ARP	0x0806		/* Address Resolution packet	*/
-#define	ETH_P_BPQ	0x08FF		/* G8BPQ AX.25 Ethernet Packet	[ NOT AN OFFICIALLY REGISTERED ID ] */
-#define ETH_P_IEEEPUP	0x0a00		/* Xerox IEEE802.3 PUP packet */
-#define ETH_P_IEEEPUPAT	0x0a01		/* Xerox IEEE802.3 PUP Addr Trans packet */
-#define ETH_P_DEC       0x6000          /* DEC Assigned proto           */
-#define ETH_P_DNA_DL    0x6001          /* DEC DNA Dump/Load            */
-#define ETH_P_DNA_RC    0x6002          /* DEC DNA Remote Console       */
-#define ETH_P_DNA_RT    0x6003          /* DEC DNA Routing              */
-#define ETH_P_LAT       0x6004          /* DEC LAT                      */
-#define ETH_P_DIAG      0x6005          /* DEC Diagnostics              */
-#define ETH_P_CUST      0x6006          /* DEC Customer use             */
-#define ETH_P_SCA       0x6007          /* DEC Systems Comms Arch       */
-#define ETH_P_TEB	0x6558		/* Trans Ether Bridging		*/
-#define ETH_P_RARP      0x8035		/* Reverse Addr Res packet	*/
-#define ETH_P_ATALK	0x809B		/* Appletalk DDP		*/
-#define ETH_P_AARP	0x80F3		/* Appletalk AARP		*/
-#define ETH_P_8021Q	0x8100          /* 802.1Q VLAN Extended Header  */
-#define ETH_P_IPX	0x8137		/* IPX over DIX			*/
-#define ETH_P_IPV6	0x86DD		/* IPv6 over bluebook		*/
-#define ETH_P_PAUSE	0x8808		/* IEEE Pause frames. See 802.3 31B */
-#define ETH_P_SLOW	0x8809		/* Slow Protocol. See 802.3ad 43B */
-#define ETH_P_WCCP	0x883E		/* Web-cache coordination protocol
-					 * defined in draft-wilson-wrec-wccp-v2-00.txt */
-#define ETH_P_PPP_DISC	0x8863		/* PPPoE discovery messages     */
-#define ETH_P_PPP_SES	0x8864		/* PPPoE session messages	*/
-#define ETH_P_MPLS_UC	0x8847		/* MPLS Unicast traffic		*/
-#define ETH_P_MPLS_MC	0x8848		/* MPLS Multicast traffic	*/
-#define ETH_P_ATMMPOA	0x884c		/* MultiProtocol Over ATM	*/
-#define ETH_P_LINK_CTL	0x886c		/* HPNA, wlan link local tunnel */
-#define ETH_P_ATMFATE	0x8884		/* Frame-based ATM Transport
-					 * over Ethernet
-					 */
-#define ETH_P_PAE	0x888E		/* Port Access Entity (IEEE 802.1X) */
-#define ETH_P_AOE	0x88A2		/* ATA over Ethernet		*/
-#define ETH_P_8021AD	0x88A8          /* 802.1ad Service VLAN		*/
-#define ETH_P_802_EX1	0x88B5		/* 802.1 Local Experimental 1.  */
-#define ETH_P_TIPC	0x88CA		/* TIPC 			*/
-#define ETH_P_8021AH	0x88E7          /* 802.1ah Backbone Service Tag */
-#define ETH_P_1588	0x88F7		/* IEEE 1588 Timesync */
-#define ETH_P_FCOE	0x8906		/* Fibre Channel over Ethernet  */
-#define ETH_P_TDLS	0x890D          /* TDLS */
-#define ETH_P_FIP	0x8914		/* FCoE Initialization Protocol */
-#define ETH_P_QINQ1	0x9100		/* deprecated QinQ VLAN [ NOT AN OFFICIALLY REGISTERED ID ] */
-#define ETH_P_QINQ2	0x9200		/* deprecated QinQ VLAN [ NOT AN OFFICIALLY REGISTERED ID ] */
-#define ETH_P_QINQ3	0x9300		/* deprecated QinQ VLAN [ NOT AN OFFICIALLY REGISTERED ID ] */
-#define ETH_P_EDSA	0xDADA		/* Ethertype DSA [ NOT AN OFFICIALLY REGISTERED ID ] */
-#define ETH_P_AF_IUCV   0xFBFB		/* IBM af_iucv [ NOT AN OFFICIALLY REGISTERED ID ] */
-
-/*
- *	Non DIX types. Won't clash for 1500 types.
- */
-
-#define ETH_P_802_3	0x0001		/* Dummy type for 802.3 frames  */
-#define ETH_P_AX25	0x0002		/* Dummy protocol id for AX.25  */
-#define ETH_P_ALL	0x0003		/* Every packet (be careful!!!) */
-#define ETH_P_802_2	0x0004		/* 802.2 frames 		*/
-#define ETH_P_SNAP	0x0005		/* Internal only		*/
-#define ETH_P_DDCMP     0x0006          /* DEC DDCMP: Internal only     */
-#define ETH_P_WAN_PPP   0x0007          /* Dummy type for WAN PPP frames*/
-#define ETH_P_PPP_MP    0x0008          /* Dummy type for PPP MP frames */
-#define ETH_P_LOCALTALK 0x0009		/* Localtalk pseudo type 	*/
-#define ETH_P_CAN	0x000C		/* Controller Area Network      */
-#define ETH_P_PPPTALK	0x0010		/* Dummy type for Atalk over PPP*/
-#define ETH_P_TR_802_2	0x0011		/* 802.2 frames 		*/
-#define ETH_P_MOBITEX	0x0015		/* Mobitex (kaz@cafe.net)	*/
-#define ETH_P_CONTROL	0x0016		/* Card specific control frames */
-#define ETH_P_IRDA	0x0017		/* Linux-IrDA			*/
-#define ETH_P_ECONET	0x0018		/* Acorn Econet			*/
-#define ETH_P_HDLC	0x0019		/* HDLC frames			*/
-#define ETH_P_ARCNET	0x001A		/* 1A for ArcNet :-)            */
-#define ETH_P_DSA	0x001B		/* Distributed Switch Arch.	*/
-#define ETH_P_TRAILER	0x001C		/* Trailer switch tagging	*/
-#define ETH_P_PHONET	0x00F5		/* Nokia Phonet frames          */
-#define ETH_P_IEEE802154 0x00F6		/* IEEE802.15.4 frame		*/
-#define ETH_P_CAIF	0x00F7		/* ST-Ericsson CAIF protocol	*/
-
-/*
- *	This is an Ethernet frame header.
- */
-
-struct ethhdr {
-	unsigned char	h_dest[ETH_ALEN];	/* destination eth addr	*/
-	unsigned char	h_source[ETH_ALEN];	/* source ether addr	*/
-	__be16		h_proto;		/* packet type ID field	*/
-} __attribute__((packed));
-
-#ifdef __KERNEL__
-#include <linux/skbuff.h>
-
-static inline struct ethhdr *eth_hdr(const struct sk_buff *skb)
-{
-	return (struct ethhdr *)skb_mac_header(skb);
-}
-
-int eth_header_parse(const struct sk_buff *skb, unsigned char *haddr);
-
-int mac_pton(const char *s, u8 *mac);
-extern ssize_t sysfs_format_mac(char *buf, const unsigned char *addr, int len);
-
-#endif
-
-#endif	/* _LINUX_IF_ETHER_H */
diff --git a/ANDROID_3.4.5/include/linux/if_fc.h b/ANDROID_3.4.5/include/linux/if_fc.h
deleted file mode 100644
index 6ed7f1bf..00000000
--- a/ANDROID_3.4.5/include/linux/if_fc.h
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
- * INET		An implementation of the TCP/IP protocol suite for the LINUX
- *		operating system.  INET is implemented using the  BSD Socket
- *		interface as the means of communication with the user level.
- *
- *		Global definitions for Fibre Channel.
- *
- * Version:	@(#)if_fc.h	0.0	11/20/98
- *
- * Author:	Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
- *		Donald Becker, <becker@super.org>
- *    Peter De Schrijver, <stud11@cc4.kuleuven.ac.be>
- *	  Vineet Abraham, <vma@iol.unh.edu>
- *
- *		This program is free software; you can redistribute it and/or
- *		modify it under the terms of the GNU General Public License
- *		as published by the Free Software Foundation; either version
- *		2 of the License, or (at your option) any later version.
- */
-#ifndef _LINUX_IF_FC_H
-#define _LINUX_IF_FC_H
-
-#include <linux/types.h>
-
-#define FC_ALEN	6		/* Octets in one ethernet addr	 */
-#define FC_HLEN   (sizeof(struct fch_hdr)+sizeof(struct fcllc))
-#define FC_ID_LEN 3		/* Octets in a Fibre Channel Address */
-
-/* LLC and SNAP constants */
-#define EXTENDED_SAP 0xAA
-#define UI_CMD       0x03
-
-/* This is NOT the Fibre Channel frame header. The FC frame header is
- *  constructed in the driver as the Tachyon needs certain fields in
- *  certains positions. So, it can't be generalized here.*/
-
-struct fch_hdr {
-	__u8  daddr[FC_ALEN];		/* destination address */
-	__u8  saddr[FC_ALEN];		/* source address */
-};
-
-/* This is a Fibre Channel LLC structure */
-struct fcllc {
-	__u8  dsap;			/* destination SAP */
-	__u8  ssap;			/* source SAP */
-	__u8  llc;			/* LLC control field */
-	__u8  protid[3];		/* protocol id */
-	__be16 ethertype;		/* ether type field */
-};
-
-#endif	/* _LINUX_IF_FC_H */
diff --git a/ANDROID_3.4.5/include/linux/if_fddi.h b/ANDROID_3.4.5/include/linux/if_fddi.h
deleted file mode 100644
index e6dc11e7..00000000
--- a/ANDROID_3.4.5/include/linux/if_fddi.h
+++ /dev/null
@@ -1,199 +0,0 @@
-/*
- * INET		An implementation of the TCP/IP protocol suite for the LINUX
- *		operating system.  INET is implemented using the BSD Socket
- *		interface as the means of communication with the user level.
- *
- *		Global definitions for the ANSI FDDI interface.
- *
- * Version:	@(#)if_fddi.h	1.0.2	Sep 29 2004
- *
- * Author:	Lawrence V. Stefani, <stefani@lkg.dec.com>
- *
- *		if_fddi.h is based on previous if_ether.h and if_tr.h work by
- *			Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
- *			Donald Becker, <becker@super.org>
- *			Alan Cox, <alan@lxorguk.ukuu.org.uk>
- *			Steve Whitehouse, <gw7rrm@eeshack3.swan.ac.uk>
- *			Peter De Schrijver, <stud11@cc4.kuleuven.ac.be>
- *
- *		This program is free software; you can redistribute it and/or
- *		modify it under the terms of the GNU General Public License
- *		as published by the Free Software Foundation; either version
- *		2 of the License, or (at your option) any later version.
- */
-#ifndef _LINUX_IF_FDDI_H
-#define _LINUX_IF_FDDI_H
-
-#include <linux/types.h>
-
-/*
- *  Define max and min legal sizes.  The frame sizes do not include
- *  4 byte FCS/CRC (frame check sequence).
- */
-#define FDDI_K_ALEN			6		/* Octets in one FDDI address */
-#define FDDI_K_8022_HLEN	16		/* Total octets in 802.2 header */
-#define FDDI_K_SNAP_HLEN	21		/* Total octets in 802.2 SNAP header */
-#define FDDI_K_8022_ZLEN	16		/* Min octets in 802.2 frame sans FCS */
-#define FDDI_K_SNAP_ZLEN	21		/* Min octets in 802.2 SNAP frame sans FCS */
-#define FDDI_K_8022_DLEN	4475	/* Max octets in 802.2 payload */
-#define FDDI_K_SNAP_DLEN	4470	/* Max octets in 802.2 SNAP payload */
-#define FDDI_K_LLC_ZLEN		13		/* Min octets in LLC frame sans FCS */
-#define FDDI_K_LLC_LEN		4491	/* Max octets in LLC frame sans FCS */
-
-/* Define FDDI Frame Control (FC) Byte values */
-#define FDDI_FC_K_VOID					0x00	
-#define FDDI_FC_K_NON_RESTRICTED_TOKEN	0x80	
-#define FDDI_FC_K_RESTRICTED_TOKEN		0xC0	
-#define FDDI_FC_K_SMT_MIN				0x41
-#define FDDI_FC_K_SMT_MAX		   		0x4F
-#define FDDI_FC_K_MAC_MIN				0xC1
-#define FDDI_FC_K_MAC_MAX		  		0xCF	
-#define FDDI_FC_K_ASYNC_LLC_MIN			0x50
-#define FDDI_FC_K_ASYNC_LLC_DEF			0x54
-#define FDDI_FC_K_ASYNC_LLC_MAX			0x5F
-#define FDDI_FC_K_SYNC_LLC_MIN			0xD0
-#define FDDI_FC_K_SYNC_LLC_MAX			0xD7
-#define FDDI_FC_K_IMPLEMENTOR_MIN		0x60
-#define FDDI_FC_K_IMPLEMENTOR_MAX  		0x6F
-#define FDDI_FC_K_RESERVED_MIN			0x70
-#define FDDI_FC_K_RESERVED_MAX			0x7F
-
-/* Define LLC and SNAP constants */
-#define FDDI_EXTENDED_SAP	0xAA
-#define FDDI_UI_CMD			0x03
-
-/* Define 802.2 Type 1 header */
-struct fddi_8022_1_hdr {
-	__u8	dsap;					/* destination service access point */
-	__u8	ssap;					/* source service access point */
-	__u8	ctrl;					/* control byte #1 */
-} __attribute__((packed));
-
-/* Define 802.2 Type 2 header */
-struct fddi_8022_2_hdr {
-	__u8	dsap;					/* destination service access point */
-	__u8	ssap;					/* source service access point */
-	__u8	ctrl_1;					/* control byte #1 */
-	__u8	ctrl_2;					/* control byte #2 */
-} __attribute__((packed));
-
-/* Define 802.2 SNAP header */
-#define FDDI_K_OUI_LEN	3
-struct fddi_snap_hdr {
-	__u8	dsap;					/* always 0xAA */
-	__u8	ssap;					/* always 0xAA */
-	__u8	ctrl;					/* always 0x03 */
-	__u8	oui[FDDI_K_OUI_LEN];	/* organizational universal id */
-	__be16	ethertype;				/* packet type ID field */
-} __attribute__((packed));
-
-/* Define FDDI LLC frame header */
-struct fddihdr {
-	__u8	fc;						/* frame control */
-	__u8	daddr[FDDI_K_ALEN];		/* destination address */
-	__u8	saddr[FDDI_K_ALEN];		/* source address */
-	union
-		{
-		struct fddi_8022_1_hdr		llc_8022_1;
-		struct fddi_8022_2_hdr		llc_8022_2;
-		struct fddi_snap_hdr		llc_snap;
-		} hdr;
-} __attribute__((packed));
-
-#ifdef __KERNEL__
-#include <linux/netdevice.h>
-
-/* Define FDDI statistics structure */
-struct fddi_statistics {
-
-	/* Generic statistics. */
-
-	struct net_device_stats gen;
-
-	/* Detailed FDDI statistics.  Adopted from RFC 1512 */
-
-	__u8	smt_station_id[8];
-	__u32	smt_op_version_id;
-	__u32	smt_hi_version_id;
-	__u32	smt_lo_version_id;
-	__u8	smt_user_data[32];
-	__u32	smt_mib_version_id;
-	__u32	smt_mac_cts;
-	__u32	smt_non_master_cts;
-	__u32	smt_master_cts;
-	__u32	smt_available_paths;
-	__u32	smt_config_capabilities;
-	__u32	smt_config_policy;
-	__u32	smt_connection_policy;
-	__u32	smt_t_notify;
-	__u32	smt_stat_rpt_policy;
-	__u32	smt_trace_max_expiration;
-	__u32	smt_bypass_present;
-	__u32	smt_ecm_state;
-	__u32	smt_cf_state;
-	__u32	smt_remote_disconnect_flag;
-	__u32	smt_station_status;
-	__u32	smt_peer_wrap_flag;
-	__u32	smt_time_stamp;
-	__u32	smt_transition_time_stamp;
-	__u32	mac_frame_status_functions;
-	__u32	mac_t_max_capability;
-	__u32	mac_tvx_capability;
-	__u32	mac_available_paths;
-	__u32	mac_current_path;
-	__u8	mac_upstream_nbr[FDDI_K_ALEN];
-	__u8	mac_downstream_nbr[FDDI_K_ALEN];
-	__u8	mac_old_upstream_nbr[FDDI_K_ALEN];
-	__u8	mac_old_downstream_nbr[FDDI_K_ALEN];
-	__u32	mac_dup_address_test;
-	__u32	mac_requested_paths;
-	__u32	mac_downstream_port_type;
-	__u8	mac_smt_address[FDDI_K_ALEN];
-	__u32	mac_t_req;
-	__u32	mac_t_neg;
-	__u32	mac_t_max;
-	__u32	mac_tvx_value;
-	__u32	mac_frame_cts;
-	__u32	mac_copied_cts;
-	__u32	mac_transmit_cts;
-	__u32	mac_error_cts;
-	__u32	mac_lost_cts;
-	__u32	mac_frame_error_threshold;
-	__u32	mac_frame_error_ratio;
-	__u32	mac_rmt_state;
-	__u32	mac_da_flag;
-	__u32	mac_una_da_flag;
-	__u32	mac_frame_error_flag;
-	__u32	mac_ma_unitdata_available;
-	__u32	mac_hardware_present;
-	__u32	mac_ma_unitdata_enable;
-	__u32	path_tvx_lower_bound;
-	__u32	path_t_max_lower_bound;
-	__u32	path_max_t_req;
-	__u32	path_configuration[8];
-	__u32	port_my_type[2];
-	__u32	port_neighbor_type[2];
-	__u32	port_connection_policies[2];
-	__u32	port_mac_indicated[2];
-	__u32	port_current_path[2];
-	__u8	port_requested_paths[3*2];
-	__u32	port_mac_placement[2];
-	__u32	port_available_paths[2];
-	__u32	port_pmd_class[2];
-	__u32	port_connection_capabilities[2];
-	__u32	port_bs_flag[2];
-	__u32	port_lct_fail_cts[2];
-	__u32	port_ler_estimate[2];
-	__u32	port_lem_reject_cts[2];
-	__u32	port_lem_cts[2];
-	__u32	port_ler_cutoff[2];
-	__u32	port_ler_alarm[2];
-	__u32	port_connect_state[2];
-	__u32	port_pcm_state[2];
-	__u32	port_pc_withhold[2];
-	__u32	port_ler_flag[2];
-	__u32	port_hardware_present[2];
-};
-#endif /* __KERNEL__ */
-
-#endif	/* _LINUX_IF_FDDI_H */
diff --git a/ANDROID_3.4.5/include/linux/if_frad.h b/ANDROID_3.4.5/include/linux/if_frad.h
deleted file mode 100644
index 191ee086..00000000
--- a/ANDROID_3.4.5/include/linux/if_frad.h
+++ /dev/null
@@ -1,193 +0,0 @@
-/*
- * DLCI/FRAD	Definitions for Frame Relay Access Devices.  DLCI devices are
- *		created for each DLCI associated with a FRAD.  The FRAD driver
- *		is not truly a network device, but the lower level device
- *		handler.  This allows other FRAD manufacturers to use the DLCI
- *		code, including its RFC1490 encapsulation alongside the current
- *		implementation for the Sangoma cards.
- *
- * Version:	@(#)if_ifrad.h	0.15	31 Mar 96
- *
- * Author:	Mike McLagan <mike.mclagan@linux.org>
- *
- * Changes:
- *		0.15	Mike McLagan	changed structure defs (packed)
- *					re-arranged flags
- *					added DLCI_RET vars
- *
- *		This program is free software; you can redistribute it and/or
- *		modify it under the terms of the GNU General Public License
- *		as published by the Free Software Foundation; either version
- *		2 of the License, or (at your option) any later version.
- */
-
-#ifndef _FRAD_H_
-#define _FRAD_H_
-
-#include <linux/if.h>
-
-/* Structures and constants associated with the DLCI device driver */
-
-struct dlci_add
-{
-   char  devname[IFNAMSIZ];
-   short dlci;
-};
-
-#define DLCI_GET_CONF	(SIOCDEVPRIVATE + 2)
-#define DLCI_SET_CONF	(SIOCDEVPRIVATE + 3)
-
-/* 
- * These are related to the Sangoma SDLA and should remain in order. 
- * Code within the SDLA module is based on the specifics of this 
- * structure.  Change at your own peril.
- */
-struct dlci_conf {
-   short flags;
-   short CIR_fwd;
-   short Bc_fwd;
-   short Be_fwd;
-   short CIR_bwd;
-   short Bc_bwd;
-   short Be_bwd; 
-
-/* these are part of the status read */
-   short Tc_fwd;
-   short Tc_bwd;
-   short Tf_max;
-   short Tb_max;
-
-/* add any new fields here above is a mirror of sdla_dlci_conf */
-};
-
-#define DLCI_GET_SLAVE	(SIOCDEVPRIVATE + 4)
-
-/* configuration flags for DLCI */
-#define DLCI_IGNORE_CIR_OUT	0x0001
-#define DLCI_ACCOUNT_CIR_IN	0x0002
-#define DLCI_BUFFER_IF		0x0008
-
-#define DLCI_VALID_FLAGS	0x000B
-
-/* defines for the actual Frame Relay hardware */
-#define FRAD_GET_CONF	(SIOCDEVPRIVATE)
-#define FRAD_SET_CONF	(SIOCDEVPRIVATE + 1)
-
-#define FRAD_LAST_IOCTL	FRAD_SET_CONF
-
-/*
- * Based on the setup for the Sangoma SDLA.  If changes are 
- * necessary to this structure, a routine will need to be 
- * added to that module to copy fields.
- */
-struct frad_conf 
-{
-   short station;
-   short flags;
-   short kbaud;
-   short clocking;
-   short mtu;
-   short T391;
-   short T392;
-   short N391;
-   short N392;
-   short N393;
-   short CIR_fwd;
-   short Bc_fwd;
-   short Be_fwd;
-   short CIR_bwd;
-   short Bc_bwd;
-   short Be_bwd;
-
-/* Add new fields here, above is a mirror of the sdla_conf */
-
-};
-
-#define FRAD_STATION_CPE	0x0000
-#define FRAD_STATION_NODE	0x0001
-
-#define FRAD_TX_IGNORE_CIR	0x0001
-#define FRAD_RX_ACCOUNT_CIR	0x0002
-#define FRAD_DROP_ABORTED	0x0004
-#define FRAD_BUFFERIF		0x0008
-#define FRAD_STATS		0x0010
-#define FRAD_MCI		0x0100
-#define FRAD_AUTODLCI		0x8000
-#define FRAD_VALID_FLAGS	0x811F
-
-#define FRAD_CLOCK_INT		0x0001
-#define FRAD_CLOCK_EXT		0x0000
-
-#ifdef __KERNEL__
-
-#if defined(CONFIG_DLCI) || defined(CONFIG_DLCI_MODULE)
-
-/* these are the fields of an RFC 1490 header */
-struct frhdr
-{
-   unsigned char  control;
-
-   /* for IP packets, this can be the NLPID */
-   unsigned char  pad;
-
-   unsigned char  NLPID;
-   unsigned char  OUI[3];
-   __be16 PID;
-
-#define IP_NLPID pad 
-} __packed;
-
-/* see RFC 1490 for the definition of the following */
-#define FRAD_I_UI		0x03
-
-#define FRAD_P_PADDING		0x00
-#define FRAD_P_Q933		0x08
-#define FRAD_P_SNAP		0x80
-#define FRAD_P_CLNP		0x81
-#define FRAD_P_IP		0xCC
-
-struct dlci_local
-{
-   struct net_device      *master;
-   struct net_device      *slave;
-   struct dlci_conf       config;
-   int                    configured;
-   struct list_head	  list;
-
-   /* callback function */
-   void              (*receive)(struct sk_buff *skb, struct net_device *);
-};
-
-struct frad_local
-{
-   struct net_device_stats stats;
-
-   /* devices which this FRAD is slaved to */
-   struct net_device     *master[CONFIG_DLCI_MAX];
-   short             dlci[CONFIG_DLCI_MAX];
-
-   struct frad_conf  config;
-   int               configured;	/* has this device been configured */
-   int               initialized;	/* mem_start, port, irq set ? */
-
-   /* callback functions */
-   int               (*activate)(struct net_device *, struct net_device *);
-   int               (*deactivate)(struct net_device *, struct net_device *);
-   int               (*assoc)(struct net_device *, struct net_device *);
-   int               (*deassoc)(struct net_device *, struct net_device *);
-   int               (*dlci_conf)(struct net_device *, struct net_device *, int get);
-
-   /* fields that are used by the Sangoma SDLA cards */
-   struct timer_list timer;
-   int               type;		/* adapter type */
-   int               state;		/* state of the S502/8 control latch */
-   int               buffer;		/* current buffer for S508 firmware */
-};
-
-#endif /* CONFIG_DLCI || CONFIG_DLCI_MODULE */
-
-extern void dlci_ioctl_set(int (*hook)(unsigned int, void __user *));
-
-#endif /* __KERNEL__ */
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/if_hippi.h b/ANDROID_3.4.5/include/linux/if_hippi.h
deleted file mode 100644
index cdc049f1..00000000
--- a/ANDROID_3.4.5/include/linux/if_hippi.h
+++ /dev/null
@@ -1,153 +0,0 @@
-/*
- * INET		An implementation of the TCP/IP protocol suite for the LINUX
- *		operating system.  INET is implemented using the  BSD Socket
- *		interface as the means of communication with the user level.
- *
- *		Global definitions for the HIPPI interface.
- *
- * Version:	@(#)if_hippi.h	1.0.0	05/26/97
- *
- * Author:	Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
- *		Donald Becker, <becker@super.org>
- *		Alan Cox, <alan@lxorguk.ukuu.org.uk>
- *		Steve Whitehouse, <gw7rrm@eeshack3.swan.ac.uk>
- *		Jes Sorensen, <Jes.Sorensen@cern.ch>
- *
- *		This program is free software; you can redistribute it and/or
- *		modify it under the terms of the GNU General Public License
- *		as published by the Free Software Foundation; either version
- *		2 of the License, or (at your option) any later version.
- */
- 
-#ifndef _LINUX_IF_HIPPI_H
-#define _LINUX_IF_HIPPI_H
-
-#include <linux/types.h>
-#include <asm/byteorder.h>
-
-/*
- *	HIPPI magic constants.
- */
-
-#define HIPPI_ALEN	6		/* Bytes in one HIPPI hw-addr	   */
-#define HIPPI_HLEN	sizeof(struct hippi_hdr)
-#define HIPPI_ZLEN	0		/* Min. bytes in frame without FCS */
-#define HIPPI_DATA_LEN	65280		/* Max. bytes in payload	   */
-#define HIPPI_FRAME_LEN	(HIPPI_DATA_LEN + HIPPI_HLEN)
-					/* Max. bytes in frame without FCS */
-
-/*
- * Define LLC and SNAP constants.
- */
-#define HIPPI_EXTENDED_SAP	0xAA
-#define HIPPI_UI_CMD		0x03
-
-
-/*
- *	Do we need to list some sort of ID's here?
- */
-
-/*
- *	HIPPI statistics collection data. 
- */
- 
-struct hipnet_statistics {
-	int	rx_packets;		/* total packets received	*/
-	int	tx_packets;		/* total packets transmitted	*/
-	int	rx_errors;		/* bad packets received		*/
-	int	tx_errors;		/* packet transmit problems	*/
-	int	rx_dropped;		/* no space in linux buffers	*/
-	int	tx_dropped;		/* no space available in linux	*/
-
-	/* detailed rx_errors: */
-	int	rx_length_errors;
-	int	rx_over_errors;		/* receiver ring buff overflow	*/
-	int	rx_crc_errors;		/* recved pkt with crc error	*/
-	int	rx_frame_errors;	/* recv'd frame alignment error */
-	int	rx_fifo_errors;		/* recv'r fifo overrun		*/
-	int	rx_missed_errors;	/* receiver missed packet	*/
-
-	/* detailed tx_errors */
-	int	tx_aborted_errors;
-	int	tx_carrier_errors;
-	int	tx_fifo_errors;
-	int	tx_heartbeat_errors;
-	int	tx_window_errors;
-};
-
-
-struct hippi_fp_hdr {
-#if 0
-	__u8		ulp;				/* must contain 4 */
-#if defined (__BIG_ENDIAN_BITFIELD)
-	__u8		d1_data_present:1;		/* must be 1 */
-	__u8		start_d2_burst_boundary:1;	/* must be zero */
-	__u8		reserved:6;			/* must be zero */
-#if 0
-	__u16		reserved1:5;
-	__u16		d1_area_size:8;			/* must be 3 */
-	__u16		d2_offset:3;			/* must be zero */
-#endif
-#elif defined(__LITTLE_ENDIAN_BITFIELD)
-	__u8		reserved:6;			/* must be zero */
-	__u8	 	start_d2_burst_boundary:1;	/* must be zero */
-	__u8		d1_data_present:1;		/* must be 1 */
-#if 0
-	__u16		d2_offset:3;			/* must be zero */
-	__u16		d1_area_size:8;			/* must be 3 */
-	__u16		reserved1:5;			/* must be zero */
-#endif
-#else
-#error	"Please fix <asm/byteorder.h>"
-#endif
-#else
-	__be32		fixed;
-#endif
-	__be32		d2_size;
-} __attribute__((packed));
-
-struct hippi_le_hdr {
-#if defined (__BIG_ENDIAN_BITFIELD)
-	__u8		fc:3;
-	__u8		double_wide:1;
-	__u8		message_type:4;
-#elif defined(__LITTLE_ENDIAN_BITFIELD)
-	__u8		message_type:4;
-	__u8		double_wide:1;
-	__u8		fc:3;
-#endif
-	__u8		dest_switch_addr[3];
-#if defined (__BIG_ENDIAN_BITFIELD)
-	__u8		dest_addr_type:4,
-			src_addr_type:4;
-#elif defined(__LITTLE_ENDIAN_BITFIELD)
-	__u8		src_addr_type:4,
-			dest_addr_type:4;
-#endif
-	__u8		src_switch_addr[3];
-	__u16		reserved;
-	__u8		daddr[HIPPI_ALEN];
-	__u16		locally_administered;
-	__u8		saddr[HIPPI_ALEN];
-} __attribute__((packed));
-
-#define HIPPI_OUI_LEN	3
-/*
- * Looks like the dsap and ssap fields have been swapped by mistake in
- * RFC 2067 "IP over HIPPI".
- */
-struct hippi_snap_hdr {
-	__u8	dsap;			/* always 0xAA */
-	__u8	ssap;			/* always 0xAA */
-	__u8	ctrl;			/* always 0x03 */
-	__u8	oui[HIPPI_OUI_LEN];	/* organizational universal id (zero)*/
-	__be16	ethertype;		/* packet type ID field */
-} __attribute__((packed));
-
-struct hippi_hdr {
-	struct hippi_fp_hdr	fp;
-	struct hippi_le_hdr	le;
-	struct hippi_snap_hdr	snap;
-} __attribute__((packed));
-
-#endif	/* _LINUX_IF_HIPPI_H */
diff --git a/ANDROID_3.4.5/include/linux/if_infiniband.h b/ANDROID_3.4.5/include/linux/if_infiniband.h
deleted file mode 100644
index 7d958475..00000000
--- a/ANDROID_3.4.5/include/linux/if_infiniband.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * This software is available to you under a choice of one of two
- * licenses.  You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available at
- * <http://www.fsf.org/copyleft/gpl.html>, or the OpenIB.org BSD
- * license, available in the LICENSE.TXT file accompanying this
- * software.  These details are also available at
- * <http://www.openfabrics.org/software_license.htm>.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
- * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
- * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
- *
- * Copyright (c) 2004 Topspin Communications.  All rights reserved.
- *
- * $Id$
- */
-
-#ifndef _LINUX_IF_INFINIBAND_H
-#define _LINUX_IF_INFINIBAND_H
-
-#define INFINIBAND_ALEN		20	/* Octets in IPoIB HW addr	*/
-
-#endif /* _LINUX_IF_INFINIBAND_H */
diff --git a/ANDROID_3.4.5/include/linux/if_link.h b/ANDROID_3.4.5/include/linux/if_link.h
deleted file mode 100644
index 4b24ff45..00000000
--- a/ANDROID_3.4.5/include/linux/if_link.h
+++ /dev/null
@@ -1,394 +0,0 @@
-#ifndef _LINUX_IF_LINK_H
-#define _LINUX_IF_LINK_H
-
-#include <linux/types.h>
-#include <linux/netlink.h>
-
-/* This struct should be in sync with struct rtnl_link_stats64 */
-struct rtnl_link_stats {
-	__u32	rx_packets;		/* total packets received	*/
-	__u32	tx_packets;		/* total packets transmitted	*/
-	__u32	rx_bytes;		/* total bytes received 	*/
-	__u32	tx_bytes;		/* total bytes transmitted	*/
-	__u32	rx_errors;		/* bad packets received		*/
-	__u32	tx_errors;		/* packet transmit problems	*/
-	__u32	rx_dropped;		/* no space in linux buffers	*/
-	__u32	tx_dropped;		/* no space available in linux	*/
-	__u32	multicast;		/* multicast packets received	*/
-	__u32	collisions;
-
-	/* detailed rx_errors: */
-	__u32	rx_length_errors;
-	__u32	rx_over_errors;		/* receiver ring buff overflow	*/
-	__u32	rx_crc_errors;		/* recved pkt with crc error	*/
-	__u32	rx_frame_errors;	/* recv'd frame alignment error */
-	__u32	rx_fifo_errors;		/* recv'r fifo overrun		*/
-	__u32	rx_missed_errors;	/* receiver missed packet	*/
-
-	/* detailed tx_errors */
-	__u32	tx_aborted_errors;
-	__u32	tx_carrier_errors;
-	__u32	tx_fifo_errors;
-	__u32	tx_heartbeat_errors;
-	__u32	tx_window_errors;
-
-	/* for cslip etc */
-	__u32	rx_compressed;
-	__u32	tx_compressed;
-};
-
-/* The main device statistics structure */
-struct rtnl_link_stats64 {
-	__u64	rx_packets;		/* total packets received	*/
-	__u64	tx_packets;		/* total packets transmitted	*/
-	__u64	rx_bytes;		/* total bytes received 	*/
-	__u64	tx_bytes;		/* total bytes transmitted	*/
-	__u64	rx_errors;		/* bad packets received		*/
-	__u64	tx_errors;		/* packet transmit problems	*/
-	__u64	rx_dropped;		/* no space in linux buffers	*/
-	__u64	tx_dropped;		/* no space available in linux	*/
-	__u64	multicast;		/* multicast packets received	*/
-	__u64	collisions;
-
-	/* detailed rx_errors: */
-	__u64	rx_length_errors;
-	__u64	rx_over_errors;		/* receiver ring buff overflow	*/
-	__u64	rx_crc_errors;		/* recved pkt with crc error	*/
-	__u64	rx_frame_errors;	/* recv'd frame alignment error */
-	__u64	rx_fifo_errors;		/* recv'r fifo overrun		*/
-	__u64	rx_missed_errors;	/* receiver missed packet	*/
-
-	/* detailed tx_errors */
-	__u64	tx_aborted_errors;
-	__u64	tx_carrier_errors;
-	__u64	tx_fifo_errors;
-	__u64	tx_heartbeat_errors;
-	__u64	tx_window_errors;
-
-	/* for cslip etc */
-	__u64	rx_compressed;
-	__u64	tx_compressed;
-};
-
-/* The struct should be in sync with struct ifmap */
-struct rtnl_link_ifmap {
-	__u64	mem_start;
-	__u64	mem_end;
-	__u64	base_addr;
-	__u16	irq;
-	__u8	dma;
-	__u8	port;
-};
-
-/*
- * IFLA_AF_SPEC
- *   Contains nested attributes for address family specific attributes.
- *   Each address family may create a attribute with the address family
- *   number as type and create its own attribute structure in it.
- *
- *   Example:
- *   [IFLA_AF_SPEC] = {
- *       [AF_INET] = {
- *           [IFLA_INET_CONF] = ...,
- *       },
- *       [AF_INET6] = {
- *           [IFLA_INET6_FLAGS] = ...,
- *           [IFLA_INET6_CONF] = ...,
- *       }
- *   }
- */
-
-enum {
-	IFLA_UNSPEC,
-	IFLA_ADDRESS,
-	IFLA_BROADCAST,
-	IFLA_IFNAME,
-	IFLA_MTU,
-	IFLA_LINK,
-	IFLA_QDISC,
-	IFLA_STATS,
-	IFLA_COST,
-#define IFLA_COST IFLA_COST
-	IFLA_PRIORITY,
-#define IFLA_PRIORITY IFLA_PRIORITY
-	IFLA_MASTER,
-#define IFLA_MASTER IFLA_MASTER
-	IFLA_WIRELESS,		/* Wireless Extension event - see wireless.h */
-#define IFLA_WIRELESS IFLA_WIRELESS
-	IFLA_PROTINFO,		/* Protocol specific information for a link */
-#define IFLA_PROTINFO IFLA_PROTINFO
-	IFLA_TXQLEN,
-#define IFLA_TXQLEN IFLA_TXQLEN
-	IFLA_MAP,
-#define IFLA_MAP IFLA_MAP
-	IFLA_WEIGHT,
-#define IFLA_WEIGHT IFLA_WEIGHT
-	IFLA_OPERSTATE,
-	IFLA_LINKMODE,
-	IFLA_LINKINFO,
-#define IFLA_LINKINFO IFLA_LINKINFO
-	IFLA_NET_NS_PID,
-	IFLA_IFALIAS,
-	IFLA_NUM_VF,		/* Number of VFs if device is SR-IOV PF */
-	IFLA_VFINFO_LIST,
-	IFLA_STATS64,
-	IFLA_VF_PORTS,
-	IFLA_PORT_SELF,
-	IFLA_AF_SPEC,
-	IFLA_GROUP,		/* Group the device belongs to */
-	IFLA_NET_NS_FD,
-	IFLA_EXT_MASK,		/* Extended info mask, VFs, etc */
-	__IFLA_MAX
-};
-
-
-#define IFLA_MAX (__IFLA_MAX - 1)
-
-/* backwards compatibility for userspace */
-#ifndef __KERNEL__
-#define IFLA_RTA(r)  ((struct rtattr*)(((char*)(r)) + NLMSG_ALIGN(sizeof(struct ifinfomsg))))
-#define IFLA_PAYLOAD(n) NLMSG_PAYLOAD(n,sizeof(struct ifinfomsg))
-#endif
-
-enum {
-	IFLA_INET_UNSPEC,
-	IFLA_INET_CONF,
-	__IFLA_INET_MAX,
-};
-
-#define IFLA_INET_MAX (__IFLA_INET_MAX - 1)
-
-/* ifi_flags.
-
-   IFF_* flags.
-
-   The only change is:
-   IFF_LOOPBACK, IFF_BROADCAST and IFF_POINTOPOINT are
-   more not changeable by user. They describe link media
-   characteristics and set by device driver.
-
-   Comments:
-   - Combination IFF_BROADCAST|IFF_POINTOPOINT is invalid
-   - If neither of these three flags are set;
-     the interface is NBMA.
-
-   - IFF_MULTICAST does not mean anything special:
-   multicasts can be used on all not-NBMA links.
-   IFF_MULTICAST means that this media uses special encapsulation
-   for multicast frames. Apparently, all IFF_POINTOPOINT and
-   IFF_BROADCAST devices are able to use multicasts too.
- */
-
-/* IFLA_LINK.
-   For usual devices it is equal ifi_index.
-   If it is a "virtual interface" (f.e. tunnel), ifi_link
-   can point to real physical interface (f.e. for bandwidth calculations),
-   or maybe 0, what means, that real media is unknown (usual
-   for IPIP tunnels, when route to endpoint is allowed to change)
- */
-
-/* Subtype attributes for IFLA_PROTINFO */
-enum {
-	IFLA_INET6_UNSPEC,
-	IFLA_INET6_FLAGS,	/* link flags			*/
-	IFLA_INET6_CONF,	/* sysctl parameters		*/
-	IFLA_INET6_STATS,	/* statistics			*/
-	IFLA_INET6_MCAST,	/* MC things. What of them?	*/
-	IFLA_INET6_CACHEINFO,	/* time values and max reasm size */
-	IFLA_INET6_ICMP6STATS,	/* statistics (icmpv6)		*/
-	__IFLA_INET6_MAX
-};
-
-#define IFLA_INET6_MAX	(__IFLA_INET6_MAX - 1)
-
-struct ifla_cacheinfo {
-	__u32	max_reasm_len;
-	__u32	tstamp;		/* ipv6InterfaceTable updated timestamp */
-	__u32	reachable_time;
-	__u32	retrans_time;
-};
-
-enum {
-	IFLA_INFO_UNSPEC,
-	IFLA_INFO_KIND,
-	IFLA_INFO_DATA,
-	IFLA_INFO_XSTATS,
-	__IFLA_INFO_MAX,
-};
-
-#define IFLA_INFO_MAX	(__IFLA_INFO_MAX - 1)
-
-/* VLAN section */
-
-enum {
-	IFLA_VLAN_UNSPEC,
-	IFLA_VLAN_ID,
-	IFLA_VLAN_FLAGS,
-	IFLA_VLAN_EGRESS_QOS,
-	IFLA_VLAN_INGRESS_QOS,
-	__IFLA_VLAN_MAX,
-};
-
-#define IFLA_VLAN_MAX	(__IFLA_VLAN_MAX - 1)
-
-struct ifla_vlan_flags {
-	__u32	flags;
-	__u32	mask;
-};
-
-enum {
-	IFLA_VLAN_QOS_UNSPEC,
-	IFLA_VLAN_QOS_MAPPING,
-	__IFLA_VLAN_QOS_MAX
-};
-
-#define IFLA_VLAN_QOS_MAX	(__IFLA_VLAN_QOS_MAX - 1)
-
-struct ifla_vlan_qos_mapping {
-	__u32 from;
-	__u32 to;
-};
-
-/* MACVLAN section */
-enum {
-	IFLA_MACVLAN_UNSPEC,
-	IFLA_MACVLAN_MODE,
-	__IFLA_MACVLAN_MAX,
-};
-
-#define IFLA_MACVLAN_MAX (__IFLA_MACVLAN_MAX - 1)
-
-enum macvlan_mode {
-	MACVLAN_MODE_PRIVATE = 1, /* don't talk to other macvlans */
-	MACVLAN_MODE_VEPA    = 2, /* talk to other ports through ext bridge */
-	MACVLAN_MODE_BRIDGE  = 4, /* talk to bridge ports directly */
-	MACVLAN_MODE_PASSTHRU = 8,/* take over the underlying device */
-};
-
-/* SR-IOV virtual function management section */
-
-enum {
-	IFLA_VF_INFO_UNSPEC,
-	IFLA_VF_INFO,
-	__IFLA_VF_INFO_MAX,
-};
-
-#define IFLA_VF_INFO_MAX (__IFLA_VF_INFO_MAX - 1)
-
-enum {
-	IFLA_VF_UNSPEC,
-	IFLA_VF_MAC,		/* Hardware queue specific attributes */
-	IFLA_VF_VLAN,
-	IFLA_VF_TX_RATE,	/* TX Bandwidth Allocation */
-	IFLA_VF_SPOOFCHK,	/* Spoof Checking on/off switch */
-	__IFLA_VF_MAX,
-};
-
-#define IFLA_VF_MAX (__IFLA_VF_MAX - 1)
-
-struct ifla_vf_mac {
-	__u32 vf;
-	__u8 mac[32]; /* MAX_ADDR_LEN */
-};
-
-struct ifla_vf_vlan {
-	__u32 vf;
-	__u32 vlan; /* 0 - 4095, 0 disables VLAN filter */
-	__u32 qos;
-};
-
-struct ifla_vf_tx_rate {
-	__u32 vf;
-	__u32 rate; /* Max TX bandwidth in Mbps, 0 disables throttling */
-};
-
-struct ifla_vf_spoofchk {
-	__u32 vf;
-	__u32 setting;
-};
-#ifdef __KERNEL__
-
-/* We don't want this structure exposed to user space */
-struct ifla_vf_info {
-	__u32 vf;
-	__u8 mac[32];
-	__u32 vlan;
-	__u32 qos;
-	__u32 tx_rate;
-	__u32 spoofchk;
-};
-#endif
-
-/* VF ports management section
- *
- *	Nested layout of set/get msg is:
- *
- *		[IFLA_NUM_VF]
- *		[IFLA_VF_PORTS]
- *			[IFLA_VF_PORT]
- *				[IFLA_PORT_*], ...
- *			[IFLA_VF_PORT]
- *				[IFLA_PORT_*], ...
- *			...
- *		[IFLA_PORT_SELF]
- *			[IFLA_PORT_*], ...
- */
-
-enum {
-	IFLA_VF_PORT_UNSPEC,
-	IFLA_VF_PORT,			/* nest */
-	__IFLA_VF_PORT_MAX,
-};
-
-#define IFLA_VF_PORT_MAX (__IFLA_VF_PORT_MAX - 1)
-
-enum {
-	IFLA_PORT_UNSPEC,
-	IFLA_PORT_VF,			/* __u32 */
-	IFLA_PORT_PROFILE,		/* string */
-	IFLA_PORT_VSI_TYPE,		/* 802.1Qbg (pre-)standard VDP */
-	IFLA_PORT_INSTANCE_UUID,	/* binary UUID */
-	IFLA_PORT_HOST_UUID,		/* binary UUID */
-	IFLA_PORT_REQUEST,		/* __u8 */
-	IFLA_PORT_RESPONSE,		/* __u16, output only */
-	__IFLA_PORT_MAX,
-};
-
-#define IFLA_PORT_MAX (__IFLA_PORT_MAX - 1)
-
-#define PORT_PROFILE_MAX	40
-#define PORT_UUID_MAX		16
-#define PORT_SELF_VF		-1
-
-enum {
-	PORT_REQUEST_PREASSOCIATE = 0,
-	PORT_REQUEST_PREASSOCIATE_RR,
-	PORT_REQUEST_ASSOCIATE,
-	PORT_REQUEST_DISASSOCIATE,
-};
-
-enum {
-	PORT_VDP_RESPONSE_SUCCESS = 0,
-	PORT_VDP_RESPONSE_INVALID_FORMAT,
-	PORT_VDP_RESPONSE_INSUFFICIENT_RESOURCES,
-	PORT_VDP_RESPONSE_UNUSED_VTID,
-	PORT_VDP_RESPONSE_VTID_VIOLATION,
-	PORT_VDP_RESPONSE_VTID_VERSION_VIOALTION,
-	PORT_VDP_RESPONSE_OUT_OF_SYNC,
-	/* 0x08-0xFF reserved for future VDP use */
-	PORT_PROFILE_RESPONSE_SUCCESS = 0x100,
-	PORT_PROFILE_RESPONSE_INPROGRESS,
-	PORT_PROFILE_RESPONSE_INVALID,
-	PORT_PROFILE_RESPONSE_BADSTATE,
-	PORT_PROFILE_RESPONSE_INSUFFICIENT_RESOURCES,
-	PORT_PROFILE_RESPONSE_ERROR,
-};
-
-struct ifla_port_vsi {
-	__u8 vsi_mgr_id;
-	__u8 vsi_type_id[3];
-	__u8 vsi_type_version;
-	__u8 pad[3];
-};
-
-#endif /* _LINUX_IF_LINK_H */
diff --git a/ANDROID_3.4.5/include/linux/if_ltalk.h b/ANDROID_3.4.5/include/linux/if_ltalk.h
deleted file mode 100644
index 76525760..00000000
--- a/ANDROID_3.4.5/include/linux/if_ltalk.h
+++ /dev/null
@@ -1,12 +0,0 @@
-#ifndef __LINUX_LTALK_H
-#define __LINUX_LTALK_H
-
-#define LTALK_HLEN		1
-#define LTALK_MTU		600
-#define LTALK_ALEN		1
-
-#ifdef __KERNEL__
-extern struct net_device *alloc_ltalkdev(int sizeof_priv);
-#endif
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/if_macvlan.h b/ANDROID_3.4.5/include/linux/if_macvlan.h
deleted file mode 100644
index d103dca5..00000000
--- a/ANDROID_3.4.5/include/linux/if_macvlan.h
+++ /dev/null
@@ -1,108 +0,0 @@
-#ifndef _LINUX_IF_MACVLAN_H
-#define _LINUX_IF_MACVLAN_H
-
-#include <linux/if_link.h>
-#include <linux/list.h>
-#include <linux/netdevice.h>
-#include <linux/netlink.h>
-#include <net/netlink.h>
-#include <linux/u64_stats_sync.h>
-
-#if defined(CONFIG_MACVTAP) || defined(CONFIG_MACVTAP_MODULE)
-struct socket *macvtap_get_socket(struct file *);
-#else
-#include <linux/err.h>
-#include <linux/errno.h>
-struct file;
-struct socket;
-static inline struct socket *macvtap_get_socket(struct file *f)
-{
-	return ERR_PTR(-EINVAL);
-}
-#endif /* CONFIG_MACVTAP */
-
-struct macvlan_port;
-struct macvtap_queue;
-
-/**
- *	struct macvlan_pcpu_stats - MACVLAN percpu stats
- *	@rx_packets: number of received packets
- *	@rx_bytes: number of received bytes
- *	@rx_multicast: number of received multicast packets
- *	@tx_packets: number of transmitted packets
- *	@tx_bytes: number of transmitted bytes
- *	@syncp: synchronization point for 64bit counters
- *	@rx_errors: number of rx errors
- *	@tx_dropped: number of tx dropped packets
- */
-struct macvlan_pcpu_stats {
-	u64			rx_packets;
-	u64			rx_bytes;
-	u64			rx_multicast;
-	u64			tx_packets;
-	u64			tx_bytes;
-	struct u64_stats_sync	syncp;
-	u32			rx_errors;
-	u32			tx_dropped;
-};
-
-/*
- * Maximum times a macvtap device can be opened. This can be used to
- * configure the number of receive queue, e.g. for multiqueue virtio.
- */
-#define MAX_MACVTAP_QUEUES	(NR_CPUS < 16 ? NR_CPUS : 16)
-
-struct macvlan_dev {
-	struct net_device	*dev;
-	struct list_head	list;
-	struct hlist_node	hlist;
-	struct macvlan_port	*port;
-	struct net_device	*lowerdev;
-	struct macvlan_pcpu_stats __percpu *pcpu_stats;
-	enum macvlan_mode	mode;
-	int (*receive)(struct sk_buff *skb);
-	int (*forward)(struct net_device *dev, struct sk_buff *skb);
-	struct macvtap_queue	*taps[MAX_MACVTAP_QUEUES];
-	int			numvtaps;
-	int			minor;
-};
-
-static inline void macvlan_count_rx(const struct macvlan_dev *vlan,
-				    unsigned int len, bool success,
-				    bool multicast)
-{
-	if (likely(success)) {
-		struct macvlan_pcpu_stats *pcpu_stats;
-
-		pcpu_stats = this_cpu_ptr(vlan->pcpu_stats);
-		u64_stats_update_begin(&pcpu_stats->syncp);
-		pcpu_stats->rx_packets++;
-		pcpu_stats->rx_bytes += len;
-		if (multicast)
-			pcpu_stats->rx_multicast++;
-		u64_stats_update_end(&pcpu_stats->syncp);
-	} else {
-		this_cpu_inc(vlan->pcpu_stats->rx_errors);
-	}
-}
-
-extern void macvlan_common_setup(struct net_device *dev);
-
-extern int macvlan_common_newlink(struct net *src_net, struct net_device *dev,
-				  struct nlattr *tb[], struct nlattr *data[],
-				  int (*receive)(struct sk_buff *skb),
-				  int (*forward)(struct net_device *dev,
-						 struct sk_buff *skb));
-
-extern void macvlan_count_rx(const struct macvlan_dev *vlan,
-			     unsigned int len, bool success,
-			     bool multicast);
-
-extern void macvlan_dellink(struct net_device *dev, struct list_head *head);
-
-extern int macvlan_link_register(struct rtnl_link_ops *ops);
-
-extern netdev_tx_t macvlan_start_xmit(struct sk_buff *skb,
-				      struct net_device *dev);
-
-#endif /* _LINUX_IF_MACVLAN_H */
diff --git a/ANDROID_3.4.5/include/linux/if_packet.h b/ANDROID_3.4.5/include/linux/if_packet.h
deleted file mode 100644
index f3799295..00000000
--- a/ANDROID_3.4.5/include/linux/if_packet.h
+++ /dev/null
@@ -1,272 +0,0 @@
-#ifndef __LINUX_IF_PACKET_H
-#define __LINUX_IF_PACKET_H
-
-#include <linux/types.h>
-
-struct sockaddr_pkt {
-	unsigned short spkt_family;
-	unsigned char spkt_device[14];
-	__be16 spkt_protocol;
-};
-
-struct sockaddr_ll {
-	unsigned short	sll_family;
-	__be16		sll_protocol;
-	int		sll_ifindex;
-	unsigned short	sll_hatype;
-	unsigned char	sll_pkttype;
-	unsigned char	sll_halen;
-	unsigned char	sll_addr[8];
-};
-
-/* Packet types */
-
-#define PACKET_HOST		0		/* To us		*/
-#define PACKET_BROADCAST	1		/* To all		*/
-#define PACKET_MULTICAST	2		/* To group		*/
-#define PACKET_OTHERHOST	3		/* To someone else 	*/
-#define PACKET_OUTGOING		4		/* Outgoing of any type */
-/* These ones are invisible by user level */
-#define PACKET_LOOPBACK		5		/* MC/BRD frame looped back */
-#define PACKET_FASTROUTE	6		/* Fastrouted frame	*/
-
-/* Packet socket options */
-
-#define PACKET_ADD_MEMBERSHIP		1
-#define PACKET_DROP_MEMBERSHIP		2
-#define PACKET_RECV_OUTPUT		3
-/* Value 4 is still used by obsolete turbo-packet. */
-#define PACKET_RX_RING			5
-#define PACKET_STATISTICS		6
-#define PACKET_COPY_THRESH		7
-#define PACKET_AUXDATA			8
-#define PACKET_ORIGDEV			9
-#define PACKET_VERSION			10
-#define PACKET_HDRLEN			11
-#define PACKET_RESERVE			12
-#define PACKET_TX_RING			13
-#define PACKET_LOSS			14
-#define PACKET_VNET_HDR			15
-#define PACKET_TX_TIMESTAMP		16
-#define PACKET_TIMESTAMP		17
-#define PACKET_FANOUT			18
-
-#define PACKET_FANOUT_HASH		0
-#define PACKET_FANOUT_LB		1
-#define PACKET_FANOUT_CPU		2
-#define PACKET_FANOUT_FLAG_DEFRAG	0x8000
-
-struct tpacket_stats {
-	unsigned int	tp_packets;
-	unsigned int	tp_drops;
-};
-
-struct tpacket_stats_v3 {
-	unsigned int	tp_packets;
-	unsigned int	tp_drops;
-	unsigned int	tp_freeze_q_cnt;
-};
-
-union tpacket_stats_u {
-	struct tpacket_stats stats1;
-	struct tpacket_stats_v3 stats3;
-};
-
-struct tpacket_auxdata {
-	__u32		tp_status;
-	__u32		tp_len;
-	__u32		tp_snaplen;
-	__u16		tp_mac;
-	__u16		tp_net;
-	__u16		tp_vlan_tci;
-	__u16		tp_padding;
-};
-
-/* Rx ring - header status */
-#define TP_STATUS_KERNEL	0x0
-#define TP_STATUS_USER		0x1
-#define TP_STATUS_COPY		0x2
-#define TP_STATUS_LOSING	0x4
-#define TP_STATUS_CSUMNOTREADY	0x8
-#define TP_STATUS_VLAN_VALID   0x10 /* auxdata has valid tp_vlan_tci */
-#define TP_STATUS_BLK_TMO	0x20
-
-/* Tx ring - header status */
-#define TP_STATUS_AVAILABLE	0x0
-#define TP_STATUS_SEND_REQUEST	0x1
-#define TP_STATUS_SENDING	0x2
-#define TP_STATUS_WRONG_FORMAT	0x4
-
-/* Rx ring - feature request bits */
-#define TP_FT_REQ_FILL_RXHASH	0x1
-
-struct tpacket_hdr {
-	unsigned long	tp_status;
-	unsigned int	tp_len;
-	unsigned int	tp_snaplen;
-	unsigned short	tp_mac;
-	unsigned short	tp_net;
-	unsigned int	tp_sec;
-	unsigned int	tp_usec;
-};
-
-#define TPACKET_ALIGNMENT	16
-#define TPACKET_ALIGN(x)	(((x)+TPACKET_ALIGNMENT-1)&~(TPACKET_ALIGNMENT-1))
-#define TPACKET_HDRLEN		(TPACKET_ALIGN(sizeof(struct tpacket_hdr)) + sizeof(struct sockaddr_ll))
-
-struct tpacket2_hdr {
-	__u32		tp_status;
-	__u32		tp_len;
-	__u32		tp_snaplen;
-	__u16		tp_mac;
-	__u16		tp_net;
-	__u32		tp_sec;
-	__u32		tp_nsec;
-	__u16		tp_vlan_tci;
-	__u16		tp_padding;
-};
-
-struct tpacket_hdr_variant1 {
-	__u32	tp_rxhash;
-	__u32	tp_vlan_tci;
-};
-
-struct tpacket3_hdr {
-	__u32		tp_next_offset;
-	__u32		tp_sec;
-	__u32		tp_nsec;
-	__u32		tp_snaplen;
-	__u32		tp_len;
-	__u32		tp_status;
-	__u16		tp_mac;
-	__u16		tp_net;
-	/* pkt_hdr variants */
-	union {
-		struct tpacket_hdr_variant1 hv1;
-	};
-};
-
-struct tpacket_bd_ts {
-	unsigned int ts_sec;
-	union {
-		unsigned int ts_usec;
-		unsigned int ts_nsec;
-	};
-};
-
-struct tpacket_hdr_v1 {
-	__u32	block_status;
-	__u32	num_pkts;
-	__u32	offset_to_first_pkt;
-
-	/* Number of valid bytes (including padding)
-	 * blk_len <= tp_block_size
-	 */
-	__u32	blk_len;
-
-	/*
-	 * Quite a few uses of sequence number:
-	 * 1. Make sure cache flush etc worked.
-	 *    Well, one can argue - why not use the increasing ts below?
-	 *    But look at 2. below first.
-	 * 2. When you pass around blocks to other user space decoders,
-	 *    you can see which blk[s] is[are] outstanding etc.
-	 * 3. Validate kernel code.
-	 */
-	__aligned_u64	seq_num;
-
-	/*
-	 * ts_last_pkt:
-	 *
-	 * Case 1.	Block has 'N'(N >=1) packets and TMO'd(timed out)
-	 *		ts_last_pkt == 'time-stamp of last packet' and NOT the
-	 *		time when the timer fired and the block was closed.
-	 *		By providing the ts of the last packet we can absolutely
-	 *		guarantee that time-stamp wise, the first packet in the
-	 *		next block will never precede the last packet of the
-	 *		previous block.
-	 * Case 2.	Block has zero packets and TMO'd
-	 *		ts_last_pkt = time when the timer fired and the block
-	 *		was closed.
-	 * Case 3.	Block has 'N' packets and NO TMO.
-	 *		ts_last_pkt = time-stamp of the last pkt in the block.
-	 *
-	 * ts_first_pkt:
-	 *		Is always the time-stamp when the block was opened.
-	 *		Case a)	ZERO packets
-	 *			No packets to deal with but atleast you know the
-	 *			time-interval of this block.
-	 *		Case b) Non-zero packets
-	 *			Use the ts of the first packet in the block.
-	 *
-	 */
-	struct tpacket_bd_ts	ts_first_pkt, ts_last_pkt;
-};
-
-union tpacket_bd_header_u {
-	struct tpacket_hdr_v1 bh1;
-};
-
-struct tpacket_block_desc {
-	__u32 version;
-	__u32 offset_to_priv;
-	union tpacket_bd_header_u hdr;
-};
-
-#define TPACKET2_HDRLEN		(TPACKET_ALIGN(sizeof(struct tpacket2_hdr)) + sizeof(struct sockaddr_ll))
-#define TPACKET3_HDRLEN		(TPACKET_ALIGN(sizeof(struct tpacket3_hdr)) + sizeof(struct sockaddr_ll))
-
-enum tpacket_versions {
-	TPACKET_V1,
-	TPACKET_V2,
-	TPACKET_V3
-};
-
-/*
-   Frame structure:
-
-   - Start. Frame must be aligned to TPACKET_ALIGNMENT=16
-   - struct tpacket_hdr
-   - pad to TPACKET_ALIGNMENT=16
-   - struct sockaddr_ll
-   - Gap, chosen so that packet data (Start+tp_net) alignes to TPACKET_ALIGNMENT=16
-   - Start+tp_mac: [ Optional MAC header ]
-   - Start+tp_net: Packet data, aligned to TPACKET_ALIGNMENT=16.
-   - Pad to align to TPACKET_ALIGNMENT=16
- */
-
-struct tpacket_req {
-	unsigned int	tp_block_size;	/* Minimal size of contiguous block */
-	unsigned int	tp_block_nr;	/* Number of blocks */
-	unsigned int	tp_frame_size;	/* Size of frame */
-	unsigned int	tp_frame_nr;	/* Total number of frames */
-};
-
-struct tpacket_req3 {
-	unsigned int	tp_block_size;	/* Minimal size of contiguous block */
-	unsigned int	tp_block_nr;	/* Number of blocks */
-	unsigned int	tp_frame_size;	/* Size of frame */
-	unsigned int	tp_frame_nr;	/* Total number of frames */
-	unsigned int	tp_retire_blk_tov; /* timeout in msecs */
-	unsigned int	tp_sizeof_priv; /* offset to private data area */
-	unsigned int	tp_feature_req_word;
-};
-
-union tpacket_req_u {
-	struct tpacket_req	req;
-	struct tpacket_req3	req3;
-};
-
-struct packet_mreq {
-	int		mr_ifindex;
-	unsigned short	mr_type;
-	unsigned short	mr_alen;
-	unsigned char	mr_address[8];
-};
-
-#define PACKET_MR_MULTICAST	0
-#define PACKET_MR_PROMISC	1
-#define PACKET_MR_ALLMULTI	2
-#define PACKET_MR_UNICAST	3
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/if_phonet.h b/ANDROID_3.4.5/include/linux/if_phonet.h
deleted file mode 100644
index d70034bc..00000000
--- a/ANDROID_3.4.5/include/linux/if_phonet.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * File: if_phonet.h
- *
- * Phonet interface kernel definitions
- *
- * Copyright (C) 2008 Nokia Corporation. All rights reserved.
- */
-#ifndef LINUX_IF_PHONET_H
-#define LINUX_IF_PHONET_H
-
-#define PHONET_MIN_MTU		6	/* pn_length = 0 */
-#define PHONET_MAX_MTU		65541	/* pn_length = 0xffff */
-#define PHONET_DEV_MTU		PHONET_MAX_MTU
-
-#ifdef __KERNEL__
-extern struct header_ops phonet_header_ops;
-#endif
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/if_plip.h b/ANDROID_3.4.5/include/linux/if_plip.h
deleted file mode 100644
index 6298c7e8..00000000
--- a/ANDROID_3.4.5/include/linux/if_plip.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- *	NET3	PLIP tuning facilities for the new Niibe PLIP.
- *
- *	This program is free software; you can redistribute it and/or
- *	modify it under the terms of the GNU General Public License
- *	as published by the Free Software Foundation; either version
- *	2 of the License, or (at your option) any later version.
- *
- */
- 
-#ifndef _LINUX_IF_PLIP_H
-#define _LINUX_IF_PLIP_H
-
-#include <linux/sockios.h>
-
-#define	SIOCDEVPLIP	SIOCDEVPRIVATE
-
-struct plipconf {
-	unsigned short pcmd;
-	unsigned long  nibble;
-	unsigned long  trigger;
-};
-
-#define PLIP_GET_TIMEOUT	0x1
-#define PLIP_SET_TIMEOUT	0x2
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/if_ppp.h b/ANDROID_3.4.5/include/linux/if_ppp.h
deleted file mode 100644
index 9048fabb..00000000
--- a/ANDROID_3.4.5/include/linux/if_ppp.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <linux/ppp-ioctl.h>
diff --git a/ANDROID_3.4.5/include/linux/if_pppol2tp.h b/ANDROID_3.4.5/include/linux/if_pppol2tp.h
deleted file mode 100644
index 23cefa11..00000000
--- a/ANDROID_3.4.5/include/linux/if_pppol2tp.h
+++ /dev/null
@@ -1,82 +0,0 @@
-/***************************************************************************
- * Linux PPP over L2TP (PPPoL2TP) Socket Implementation (RFC 2661)
- *
- * This file supplies definitions required by the PPP over L2TP driver
- * (l2tp_ppp.c).  All version information wrt this file is located in l2tp_ppp.c
- *
- * License:
- *		This program is free software; you can redistribute it and/or
- *		modify it under the terms of the GNU General Public License
- *		as published by the Free Software Foundation; either version
- *		2 of the License, or (at your option) any later version.
- *
- */
-
-#ifndef __LINUX_IF_PPPOL2TP_H
-#define __LINUX_IF_PPPOL2TP_H
-
-#include <linux/types.h>
-
-#ifdef __KERNEL__
-#include <linux/in.h>
-#endif
-
-/* Structure used to connect() the socket to a particular tunnel UDP
- * socket.
- */
-struct pppol2tp_addr {
-	__kernel_pid_t	pid;		/* pid that owns the fd.
-					 * 0 => current */
-	int	fd;			/* FD of UDP socket to use */
-
-	struct sockaddr_in addr;	/* IP address and port to send to */
-
-	__u16 s_tunnel, s_session;	/* For matching incoming packets */
-	__u16 d_tunnel, d_session;	/* For sending outgoing packets */
-};
-
-/* The L2TPv3 protocol changes tunnel and session ids from 16 to 32
- * bits. So we need a different sockaddr structure.
- */
-struct pppol2tpv3_addr {
-	__kernel_pid_t	pid;		/* pid that owns the fd.
-					 * 0 => current */
-	int	fd;			/* FD of UDP or IP socket to use */
-
-	struct sockaddr_in addr;	/* IP address and port to send to */
-
-	__u32 s_tunnel, s_session;	/* For matching incoming packets */
-	__u32 d_tunnel, d_session;	/* For sending outgoing packets */
-};
-
-/* Socket options:
- * DEBUG	- bitmask of debug message categories
- * SENDSEQ	- 0 => don't send packets with sequence numbers
- *		  1 => send packets with sequence numbers
- * RECVSEQ	- 0 => receive packet sequence numbers are optional
- *		  1 => drop receive packets without sequence numbers
- * LNSMODE	- 0 => act as LAC.
- *		  1 => act as LNS.
- * REORDERTO	- reorder timeout (in millisecs). If 0, don't try to reorder.
- */
-enum {
-	PPPOL2TP_SO_DEBUG	= 1,
-	PPPOL2TP_SO_RECVSEQ	= 2,
-	PPPOL2TP_SO_SENDSEQ	= 3,
-	PPPOL2TP_SO_LNSMODE	= 4,
-	PPPOL2TP_SO_REORDERTO	= 5,
-};
-
-/* Debug message categories for the DEBUG socket option */
-enum {
-	PPPOL2TP_MSG_DEBUG	= (1 << 0),	/* verbose debug (if
-						 * compiled in) */
-	PPPOL2TP_MSG_CONTROL	= (1 << 1),	/* userspace - kernel
-						 * interface */
-	PPPOL2TP_MSG_SEQ	= (1 << 2),	/* sequence numbers */
-	PPPOL2TP_MSG_DATA	= (1 << 3),	/* data packets */
-};
-
-
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/if_pppolac.h b/ANDROID_3.4.5/include/linux/if_pppolac.h
deleted file mode 100644
index c06bd6c8..00000000
--- a/ANDROID_3.4.5/include/linux/if_pppolac.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/* include/linux/if_pppolac.h
- *
- * Header for PPP on L2TP Access Concentrator / PPPoLAC Socket (RFC 2661)
- *
- * Copyright (C) 2009 Google, Inc.
- * Author: Chia-chi Yeh <chiachi@android.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#ifndef __LINUX_IF_PPPOLAC_H
-#define __LINUX_IF_PPPOLAC_H
-
-#include <linux/socket.h>
-#include <linux/types.h>
-
-struct sockaddr_pppolac {
-	sa_family_t	sa_family;	/* AF_PPPOX */
-	unsigned int	sa_protocol;	/* PX_PROTO_OLAC */
-	int		udp_socket;
-	struct __attribute__((packed)) {
-		__u16	tunnel, session;
-	} local, remote;
-} __attribute__((packed));
-
-#endif /* __LINUX_IF_PPPOLAC_H */
diff --git a/ANDROID_3.4.5/include/linux/if_pppopns.h b/ANDROID_3.4.5/include/linux/if_pppopns.h
deleted file mode 100644
index 0cf34b4d..00000000
--- a/ANDROID_3.4.5/include/linux/if_pppopns.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/* include/linux/if_pppopns.h
- *
- * Header for PPP on PPTP Network Server / PPPoPNS Socket (RFC 2637)
- *
- * Copyright (C) 2009 Google, Inc.
- * Author: Chia-chi Yeh <chiachi@android.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#ifndef __LINUX_IF_PPPOPNS_H
-#define __LINUX_IF_PPPOPNS_H
-
-#include <linux/socket.h>
-#include <linux/types.h>
-
-struct sockaddr_pppopns {
-	sa_family_t	sa_family;	/* AF_PPPOX */
-	unsigned int	sa_protocol;	/* PX_PROTO_OPNS */
-	int		tcp_socket;
-	__u16		local;
-	__u16		remote;
-} __attribute__((packed));
-
-#endif /* __LINUX_IF_PPPOPNS_H */
diff --git a/ANDROID_3.4.5/include/linux/if_pppox.h b/ANDROID_3.4.5/include/linux/if_pppox.h
deleted file mode 100644
index 1597b8bc..00000000
--- a/ANDROID_3.4.5/include/linux/if_pppox.h
+++ /dev/null
@@ -1,250 +0,0 @@
-/***************************************************************************
- * Linux PPP over X - Generic PPP transport layer sockets
- * Linux PPP over Ethernet (PPPoE) Socket Implementation (RFC 2516) 
- *
- * This file supplies definitions required by the PPP over Ethernet driver
- * (pppox.c).  All version information wrt this file is located in pppox.c
- *
- * License:
- *		This program is free software; you can redistribute it and/or
- *		modify it under the terms of the GNU General Public License
- *		as published by the Free Software Foundation; either version
- *		2 of the License, or (at your option) any later version.
- *
- */
-
-#ifndef __LINUX_IF_PPPOX_H
-#define __LINUX_IF_PPPOX_H
-
-
-#include <linux/types.h>
-#include <asm/byteorder.h>
-
-#include <linux/socket.h>
-#include <linux/if_ether.h>
-#ifdef  __KERNEL__
-#include <linux/if.h>
-#include <linux/netdevice.h>
-#include <linux/ppp_channel.h>
-#endif /* __KERNEL__ */
-#include <linux/if_pppol2tp.h>
-#include <linux/if_pppolac.h>
-#include <linux/if_pppopns.h>
-
-/* For user-space programs to pick up these definitions
- * which they wouldn't get otherwise without defining __KERNEL__
- */
-#ifndef AF_PPPOX
-#define AF_PPPOX	24
-#define PF_PPPOX	AF_PPPOX
-#endif /* !(AF_PPPOX) */
-
-/************************************************************************ 
- * PPPoE addressing definition 
- */ 
-typedef __be16 sid_t;
-struct pppoe_addr {
-	sid_t         sid;                    /* Session identifier */
-	unsigned char remote[ETH_ALEN];       /* Remote address */
-	char          dev[IFNAMSIZ];          /* Local device to use */
-}; 
- 
-/************************************************************************ 
- * PPTP addressing definition
- */
-struct pptp_addr {
-	__be16		call_id;
-	struct in_addr	sin_addr;
-};
-
-/************************************************************************
- * Protocols supported by AF_PPPOX
- */
-#define PX_PROTO_OE    0 /* Currently just PPPoE */
-#define PX_PROTO_OL2TP 1 /* Now L2TP also */
-#define PX_PROTO_PPTP  2
-#define PX_PROTO_OLAC  3
-#define PX_PROTO_OPNS  4
-#define PX_MAX_PROTO   5
-
-struct sockaddr_pppox {
-	__kernel_sa_family_t sa_family;       /* address family, AF_PPPOX */
-	unsigned int    sa_protocol;          /* protocol identifier */
-	union {
-		struct pppoe_addr  pppoe;
-		struct pptp_addr   pptp;
-	} sa_addr;
-} __attribute__((packed));
-
-/* The use of the above union isn't viable because the size of this
- * struct must stay fixed over time -- applications use sizeof(struct
- * sockaddr_pppox) to fill it. We use a protocol specific sockaddr
- * type instead.
- */
-struct sockaddr_pppol2tp {
-	__kernel_sa_family_t sa_family; /* address family, AF_PPPOX */
-	unsigned int    sa_protocol;    /* protocol identifier */
-	struct pppol2tp_addr pppol2tp;
-} __attribute__((packed));
-
-/* The L2TPv3 protocol changes tunnel and session ids from 16 to 32
- * bits. So we need a different sockaddr structure.
- */
-struct sockaddr_pppol2tpv3 {
-	__kernel_sa_family_t sa_family; /* address family, AF_PPPOX */
-	unsigned int    sa_protocol;    /* protocol identifier */
-	struct pppol2tpv3_addr pppol2tp;
-} __attribute__((packed));
-
-/*********************************************************************
- *
- * ioctl interface for defining forwarding of connections
- *
- ********************************************************************/
-
-#define PPPOEIOCSFWD	_IOW(0xB1 ,0, size_t)
-#define PPPOEIOCDFWD	_IO(0xB1 ,1)
-/*#define PPPOEIOCGFWD	_IOWR(0xB1,2, size_t)*/
-
-/* Codes to identify message types */
-#define PADI_CODE	0x09
-#define PADO_CODE	0x07
-#define PADR_CODE	0x19
-#define PADS_CODE	0x65
-#define PADT_CODE	0xa7
-struct pppoe_tag {
-	__be16 tag_type;
-	__be16 tag_len;
-	char tag_data[0];
-} __attribute__ ((packed));
-
-/* Tag identifiers */
-#define PTT_EOL		__cpu_to_be16(0x0000)
-#define PTT_SRV_NAME	__cpu_to_be16(0x0101)
-#define PTT_AC_NAME	__cpu_to_be16(0x0102)
-#define PTT_HOST_UNIQ	__cpu_to_be16(0x0103)
-#define PTT_AC_COOKIE	__cpu_to_be16(0x0104)
-#define PTT_VENDOR 	__cpu_to_be16(0x0105)
-#define PTT_RELAY_SID	__cpu_to_be16(0x0110)
-#define PTT_SRV_ERR     __cpu_to_be16(0x0201)
-#define PTT_SYS_ERR  	__cpu_to_be16(0x0202)
-#define PTT_GEN_ERR  	__cpu_to_be16(0x0203)
-
-struct pppoe_hdr {
-#if defined(__LITTLE_ENDIAN_BITFIELD)
-	__u8 ver : 4;
-	__u8 type : 4;
-#elif defined(__BIG_ENDIAN_BITFIELD)
-	__u8 type : 4;
-	__u8 ver : 4;
-#else
-#error	"Please fix <asm/byteorder.h>"
-#endif
-	__u8 code;
-	__be16 sid;
-	__be16 length;
-	struct pppoe_tag tag[0];
-} __attribute__((packed));
-
-/* Length of entire PPPoE + PPP header */
-#define PPPOE_SES_HLEN	8
-
-#ifdef __KERNEL__
-#include <linux/skbuff.h>
-
-static inline struct pppoe_hdr *pppoe_hdr(const struct sk_buff *skb)
-{
-	return (struct pppoe_hdr *)skb_network_header(skb);
-}
-
-struct pppoe_opt {
-	struct net_device      *dev;	  /* device associated with socket*/
-	int			ifindex;  /* ifindex of device associated with socket */
-	struct pppoe_addr	pa;	  /* what this socket is bound to*/
-	struct sockaddr_pppox	relay;	  /* what socket data will be
-					     relayed to (PPPoE relaying) */
-};
-
-struct pptp_opt {
-	struct pptp_addr src_addr;
-	struct pptp_addr dst_addr;
-	u32 ack_sent, ack_recv;
-	u32 seq_sent, seq_recv;
-	int ppp_flags;
-};
-
-struct pppolac_opt {
-	__u32		local;
-	__u32		remote;
-	__u32		recv_sequence;
-	__u32		xmit_sequence;
-	atomic_t	sequencing;
-	int		(*backlog_rcv)(struct sock *sk_udp, struct sk_buff *skb);
-};
-
-struct pppopns_opt {
-	__u16		local;
-	__u16		remote;
-	__u32		recv_sequence;
-	__u32		xmit_sequence;
-	void		(*data_ready)(struct sock *sk_raw, int length);
-	int		(*backlog_rcv)(struct sock *sk_raw, struct sk_buff *skb);
-};
-
-#include <net/sock.h>
-
-struct pppox_sock {
-	/* struct sock must be the first member of pppox_sock */
-	struct sock sk;
-	struct ppp_channel chan;
-	struct pppox_sock	*next;	  /* for hash table */
-	union {
-		struct pppoe_opt pppoe;
-		struct pptp_opt  pptp;
-		struct pppolac_opt lac;
-		struct pppopns_opt pns;
-	} proto;
-	__be16			num;
-};
-#define pppoe_dev	proto.pppoe.dev
-#define pppoe_ifindex	proto.pppoe.ifindex
-#define pppoe_pa	proto.pppoe.pa
-#define pppoe_relay	proto.pppoe.relay
-
-static inline struct pppox_sock *pppox_sk(struct sock *sk)
-{
-	return (struct pppox_sock *)sk;
-}
-
-static inline struct sock *sk_pppox(struct pppox_sock *po)
-{
-	return (struct sock *)po;
-}
-
-struct module;
-
-struct pppox_proto {
-	int		(*create)(struct net *net, struct socket *sock);
-	int		(*ioctl)(struct socket *sock, unsigned int cmd,
-				 unsigned long arg);
-	struct module	*owner;
-};
-
-extern int register_pppox_proto(int proto_num, const struct pppox_proto *pp);
-extern void unregister_pppox_proto(int proto_num);
-extern void pppox_unbind_sock(struct sock *sk);/* delete ppp-channel binding */
-extern int pppox_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg);
-
-/* PPPoX socket states */
-enum {
-    PPPOX_NONE		= 0,  /* initial state */
-    PPPOX_CONNECTED	= 1,  /* connection established ==TCP_ESTABLISHED */
-    PPPOX_BOUND		= 2,  /* bound to ppp device */
-    PPPOX_RELAY		= 4,  /* forwarding is enabled */
-    PPPOX_ZOMBIE	= 8,  /* dead, but still bound to ppp device */
-    PPPOX_DEAD		= 16  /* dead, useless, please clean me up!*/
-};
-
-#endif /* __KERNEL__ */
-
-#endif /* !(__LINUX_IF_PPPOX_H) */
diff --git a/ANDROID_3.4.5/include/linux/if_slip.h b/ANDROID_3.4.5/include/linux/if_slip.h
deleted file mode 100644
index 1eb4e3a8..00000000
--- a/ANDROID_3.4.5/include/linux/if_slip.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
- *	Swansea University Computer Society	NET3
- *	
- *	This file declares the constants of special use with the SLIP/CSLIP/
- *	KISS TNC driver.
- */
- 
-#ifndef __LINUX_SLIP_H
-#define __LINUX_SLIP_H
-
-#define		SL_MODE_SLIP		0
-#define		SL_MODE_CSLIP		1
-#define 	SL_MODE_KISS		4
-
-#define		SL_OPT_SIXBIT		2
-#define		SL_OPT_ADAPTIVE		8
-
-/*
- *	VSV = ioctl for keepalive & outfill in SLIP driver 
- */
- 
-#define SIOCSKEEPALIVE	(SIOCDEVPRIVATE)		/* Set keepalive timeout in sec */
-#define SIOCGKEEPALIVE	(SIOCDEVPRIVATE+1)		/* Get keepalive timeout */
-#define SIOCSOUTFILL	(SIOCDEVPRIVATE+2)		/* Set outfill timeout */
-#define	SIOCGOUTFILL	(SIOCDEVPRIVATE+3)		/* Get outfill timeout */
-#define SIOCSLEASE	(SIOCDEVPRIVATE+4)		/* Set "leased" line type */
-#define	SIOCGLEASE	(SIOCDEVPRIVATE+5)		/* Get line type */
-
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/if_strip.h b/ANDROID_3.4.5/include/linux/if_strip.h
deleted file mode 100644
index 6526a623..00000000
--- a/ANDROID_3.4.5/include/linux/if_strip.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * if_strip.h --
- *
- *      Definitions for the STRIP interface
- *
- * Copyright 1996 The Board of Trustees of The Leland Stanford
- * Junior University. All Rights Reserved.
- *
- * Permission to use, copy, modify, and distribute this
- * software and its documentation for any purpose and without
- * fee is hereby granted, provided that the above copyright
- * notice appear in all copies.  Stanford University
- * makes no representations about the suitability of this
- * software for any purpose.  It is provided "as is" without
- * express or implied warranty.
- */
-
-#ifndef __LINUX_STRIP_H
-#define __LINUX_STRIP_H
-
-#include <linux/types.h>
-
-typedef struct {
-    __u8 c[6];
-} MetricomAddress;
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/if_team.h b/ANDROID_3.4.5/include/linux/if_team.h
deleted file mode 100644
index 58404b0c..00000000
--- a/ANDROID_3.4.5/include/linux/if_team.h
+++ /dev/null
@@ -1,252 +0,0 @@
-/*
- * include/linux/if_team.h - Network team device driver header
- * Copyright (c) 2011 Jiri Pirko <jpirko@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef _LINUX_IF_TEAM_H_
-#define _LINUX_IF_TEAM_H_
-
-#ifdef __KERNEL__
-
-struct team_pcpu_stats {
-	u64			rx_packets;
-	u64			rx_bytes;
-	u64			rx_multicast;
-	u64			tx_packets;
-	u64			tx_bytes;
-	struct u64_stats_sync	syncp;
-	u32			rx_dropped;
-	u32			tx_dropped;
-};
-
-struct team;
-
-struct team_port {
-	struct net_device *dev;
-	struct hlist_node hlist; /* node in hash list */
-	struct list_head list; /* node in ordinary list */
-	struct team *team;
-	int index;
-
-	/*
-	 * A place for storing original values of the device before it
-	 * become a port.
-	 */
-	struct {
-		unsigned char dev_addr[MAX_ADDR_LEN];
-		unsigned int mtu;
-	} orig;
-
-	bool linkup;
-	u32 speed;
-	u8 duplex;
-
-	/* Custom gennetlink interface related flags */
-	bool changed;
-	bool removed;
-
-	struct rcu_head rcu;
-};
-
-struct team_mode_ops {
-	int (*init)(struct team *team);
-	void (*exit)(struct team *team);
-	rx_handler_result_t (*receive)(struct team *team,
-				       struct team_port *port,
-				       struct sk_buff *skb);
-	bool (*transmit)(struct team *team, struct sk_buff *skb);
-	int (*port_enter)(struct team *team, struct team_port *port);
-	void (*port_leave)(struct team *team, struct team_port *port);
-	void (*port_change_mac)(struct team *team, struct team_port *port);
-};
-
-enum team_option_type {
-	TEAM_OPTION_TYPE_U32,
-	TEAM_OPTION_TYPE_STRING,
-};
-
-struct team_option {
-	struct list_head list;
-	const char *name;
-	enum team_option_type type;
-	int (*getter)(struct team *team, void *arg);
-	int (*setter)(struct team *team, void *arg);
-
-	/* Custom gennetlink interface related flags */
-	bool changed;
-	bool removed;
-};
-
-struct team_mode {
-	struct list_head list;
-	const char *kind;
-	struct module *owner;
-	size_t priv_size;
-	const struct team_mode_ops *ops;
-};
-
-#define TEAM_PORT_HASHBITS 4
-#define TEAM_PORT_HASHENTRIES (1 << TEAM_PORT_HASHBITS)
-
-#define TEAM_MODE_PRIV_LONGS 4
-#define TEAM_MODE_PRIV_SIZE (sizeof(long) * TEAM_MODE_PRIV_LONGS)
-
-struct team {
-	struct net_device *dev; /* associated netdevice */
-	struct team_pcpu_stats __percpu *pcpu_stats;
-
-	struct mutex lock; /* used for overall locking, e.g. port lists write */
-
-	/*
-	 * port lists with port count
-	 */
-	int port_count;
-	struct hlist_head port_hlist[TEAM_PORT_HASHENTRIES];
-	struct list_head port_list;
-
-	struct list_head option_list;
-
-	const struct team_mode *mode;
-	struct team_mode_ops ops;
-	long mode_priv[TEAM_MODE_PRIV_LONGS];
-};
-
-static inline struct hlist_head *team_port_index_hash(struct team *team,
-						      int port_index)
-{
-	return &team->port_hlist[port_index & (TEAM_PORT_HASHENTRIES - 1)];
-}
-
-static inline struct team_port *team_get_port_by_index(struct team *team,
-						       int port_index)
-{
-	struct hlist_node *p;
-	struct team_port *port;
-	struct hlist_head *head = team_port_index_hash(team, port_index);
-
-	hlist_for_each_entry(port, p, head, hlist)
-		if (port->index == port_index)
-			return port;
-	return NULL;
-}
-static inline struct team_port *team_get_port_by_index_rcu(struct team *team,
-							   int port_index)
-{
-	struct hlist_node *p;
-	struct team_port *port;
-	struct hlist_head *head = team_port_index_hash(team, port_index);
-
-	hlist_for_each_entry_rcu(port, p, head, hlist)
-		if (port->index == port_index)
-			return port;
-	return NULL;
-}
-
-extern int team_port_set_team_mac(struct team_port *port);
-extern int team_options_register(struct team *team,
-				 const struct team_option *option,
-				 size_t option_count);
-extern void team_options_unregister(struct team *team,
-				    const struct team_option *option,
-				    size_t option_count);
-extern int team_mode_register(struct team_mode *mode);
-extern int team_mode_unregister(struct team_mode *mode);
-
-#endif /* __KERNEL__ */
-
-#define TEAM_STRING_MAX_LEN 32
-
-/**********************************
- * NETLINK_GENERIC netlink family.
- **********************************/
-
-enum {
-	TEAM_CMD_NOOP,
-	TEAM_CMD_OPTIONS_SET,
-	TEAM_CMD_OPTIONS_GET,
-	TEAM_CMD_PORT_LIST_GET,
-
-	__TEAM_CMD_MAX,
-	TEAM_CMD_MAX = (__TEAM_CMD_MAX - 1),
-};
-
-enum {
-	TEAM_ATTR_UNSPEC,
-	TEAM_ATTR_TEAM_IFINDEX,		/* u32 */
-	TEAM_ATTR_LIST_OPTION,		/* nest */
-	TEAM_ATTR_LIST_PORT,		/* nest */
-
-	__TEAM_ATTR_MAX,
-	TEAM_ATTR_MAX = __TEAM_ATTR_MAX - 1,
-};
-
-/* Nested layout of get/set msg:
- *
- *	[TEAM_ATTR_LIST_OPTION]
- *		[TEAM_ATTR_ITEM_OPTION]
- *			[TEAM_ATTR_OPTION_*], ...
- *		[TEAM_ATTR_ITEM_OPTION]
- *			[TEAM_ATTR_OPTION_*], ...
- *		...
- *	[TEAM_ATTR_LIST_PORT]
- *		[TEAM_ATTR_ITEM_PORT]
- *			[TEAM_ATTR_PORT_*], ...
- *		[TEAM_ATTR_ITEM_PORT]
- *			[TEAM_ATTR_PORT_*], ...
- *		...
- */
-
-enum {
-	TEAM_ATTR_ITEM_OPTION_UNSPEC,
-	TEAM_ATTR_ITEM_OPTION,		/* nest */
-
-	__TEAM_ATTR_ITEM_OPTION_MAX,
-	TEAM_ATTR_ITEM_OPTION_MAX = __TEAM_ATTR_ITEM_OPTION_MAX - 1,
-};
-
-enum {
-	TEAM_ATTR_OPTION_UNSPEC,
-	TEAM_ATTR_OPTION_NAME,		/* string */
-	TEAM_ATTR_OPTION_CHANGED,	/* flag */
-	TEAM_ATTR_OPTION_TYPE,		/* u8 */
-	TEAM_ATTR_OPTION_DATA,		/* dynamic */
-	TEAM_ATTR_OPTION_REMOVED,	/* flag */
-
-	__TEAM_ATTR_OPTION_MAX,
-	TEAM_ATTR_OPTION_MAX = __TEAM_ATTR_OPTION_MAX - 1,
-};
-
-enum {
-	TEAM_ATTR_ITEM_PORT_UNSPEC,
-	TEAM_ATTR_ITEM_PORT,		/* nest */
-
-	__TEAM_ATTR_ITEM_PORT_MAX,
-	TEAM_ATTR_ITEM_PORT_MAX = __TEAM_ATTR_ITEM_PORT_MAX - 1,
-};
-
-enum {
-	TEAM_ATTR_PORT_UNSPEC,
-	TEAM_ATTR_PORT_IFINDEX,		/* u32 */
-	TEAM_ATTR_PORT_CHANGED,		/* flag */
-	TEAM_ATTR_PORT_LINKUP,		/* flag */
-	TEAM_ATTR_PORT_SPEED,		/* u32 */
-	TEAM_ATTR_PORT_DUPLEX,		/* u8 */
-	TEAM_ATTR_PORT_REMOVED,		/* flag */
-
-	__TEAM_ATTR_PORT_MAX,
-	TEAM_ATTR_PORT_MAX = __TEAM_ATTR_PORT_MAX - 1,
-};
-
-/*
- * NETLINK_GENERIC related info
- */
-#define TEAM_GENL_NAME "team"
-#define TEAM_GENL_VERSION 0x1
-#define TEAM_GENL_CHANGE_EVENT_MC_GRP_NAME "change_event"
-
-#endif /* _LINUX_IF_TEAM_H_ */
diff --git a/ANDROID_3.4.5/include/linux/if_tr.h b/ANDROID_3.4.5/include/linux/if_tr.h
deleted file mode 100644
index fc23aeb0..00000000
--- a/ANDROID_3.4.5/include/linux/if_tr.h
+++ /dev/null
@@ -1,103 +0,0 @@
-/*
- * INET		An implementation of the TCP/IP protocol suite for the LINUX
- *		operating system.  INET is implemented using the  BSD Socket
- *		interface as the means of communication with the user level.
- *
- *		Global definitions for the Token-Ring IEEE 802.5 interface.
- *
- * Version:	@(#)if_tr.h	0.0	07/11/94
- *
- * Author:	Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
- *		Donald Becker, <becker@super.org>
- *		Peter De Schrijver, <stud11@cc4.kuleuven.ac.be>
- *
- *		This program is free software; you can redistribute it and/or
- *		modify it under the terms of the GNU General Public License
- *		as published by the Free Software Foundation; either version
- *		2 of the License, or (at your option) any later version.
- */
-#ifndef _LINUX_IF_TR_H
-#define _LINUX_IF_TR_H
-
-#include <linux/types.h>
-#include <asm/byteorder.h>	/* For __be16 */
-
-/* IEEE 802.5 Token-Ring magic constants.  The frame sizes omit the preamble
-   and FCS/CRC (frame check sequence). */
-#define TR_ALEN		6		/* Octets in one token-ring addr */
-#define TR_HLEN 	(sizeof(struct trh_hdr)+sizeof(struct trllc))
-#define AC		0x10
-#define LLC_FRAME 	0x40
-
-/* LLC and SNAP constants */
-#define EXTENDED_SAP 	0xAA
-#define UI_CMD       	0x03
-
-/* This is an Token-Ring frame header. */
-struct trh_hdr {
-	__u8  ac;			/* access control field */
-	__u8  fc;			/* frame control field */
-	__u8  daddr[TR_ALEN];		/* destination address */
-	__u8  saddr[TR_ALEN];		/* source address */
-	__be16 rcf;			/* route control field */
-	__be16 rseg[8];			/* routing registers */
-};
-
-#ifdef __KERNEL__
-#include <linux/skbuff.h>
-
-static inline struct trh_hdr *tr_hdr(const struct sk_buff *skb)
-{
-	return (struct trh_hdr *)skb_mac_header(skb);
-}
-#endif
-
-/* This is an Token-Ring LLC structure */
-struct trllc {
-	__u8  dsap;			/* destination SAP */
-	__u8  ssap;			/* source SAP */
-	__u8  llc;			/* LLC control field */
-	__u8  protid[3];		/* protocol id */
-	__be16 ethertype;		/* ether type field */
-};
-
-/* Token-Ring statistics collection data. */
-struct tr_statistics {
-	unsigned long rx_packets;       /* total packets received	*/
-	unsigned long tx_packets;	/* total packets transmitted	*/
-	unsigned long rx_bytes;		/* total bytes received   	*/
-	unsigned long tx_bytes;		/* total bytes transmitted	*/
-	unsigned long rx_errors;	/* bad packets received		*/
-	unsigned long tx_errors;	/* packet transmit problems	*/
-	unsigned long rx_dropped;	/* no space in linux buffers	*/
-	unsigned long tx_dropped;	/* no space available in linux	*/
-	unsigned long multicast;	/* multicast packets received	*/
-	unsigned long transmit_collision;
-
-	/* detailed Token-Ring errors. See IBM Token-Ring Network
-	   Architecture for more info */
-
-	unsigned long line_errors;
-	unsigned long internal_errors;
-	unsigned long burst_errors;
-	unsigned long A_C_errors;
-	unsigned long abort_delimiters;
-	unsigned long lost_frames;
-	unsigned long recv_congest_count;
-	unsigned long frame_copied_errors;
-	unsigned long frequency_errors;
-	unsigned long token_errors;
-	unsigned long dummy1;
-};
-
-/* source routing stuff */
-#define TR_RII 			0x80
-#define TR_RCF_DIR_BIT 		0x80
-#define TR_RCF_LEN_MASK 	0x1f00
-#define TR_RCF_BROADCAST 	0x8000	/* all-routes broadcast */
-#define TR_RCF_LIMITED_BROADCAST 0xC000	/* single-route broadcast */
-#define TR_RCF_FRAME2K 		0x20
-#define TR_RCF_BROADCAST_MASK 	0xC000
-#define TR_MAXRIFLEN 		18
-
-#endif	/* _LINUX_IF_TR_H */
diff --git a/ANDROID_3.4.5/include/linux/if_tun.h b/ANDROID_3.4.5/include/linux/if_tun.h
deleted file mode 100644
index 06b18297..00000000
--- a/ANDROID_3.4.5/include/linux/if_tun.h
+++ /dev/null
@@ -1,108 +0,0 @@
-/*
- *  Universal TUN/TAP device driver.
- *  Copyright (C) 1999-2000 Maxim Krasnyansky <max_mk@yahoo.com>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- *  GNU General Public License for more details.
- */
-
-#ifndef __IF_TUN_H
-#define __IF_TUN_H
-
-#include <linux/types.h>
-#include <linux/if_ether.h>
-#include <linux/filter.h>
-
-/* Read queue size */
-#define TUN_READQ_SIZE	500
-
-/* TUN device flags */
-#define TUN_TUN_DEV 	0x0001	
-#define TUN_TAP_DEV	0x0002
-#define TUN_TYPE_MASK   0x000f
-
-#define TUN_FASYNC	0x0010
-#define TUN_NOCHECKSUM	0x0020
-#define TUN_NO_PI	0x0040
-#define TUN_ONE_QUEUE	0x0080
-#define TUN_PERSIST 	0x0100	
-#define TUN_VNET_HDR 	0x0200
-
-/* Ioctl defines */
-#define TUNSETNOCSUM  _IOW('T', 200, int) 
-#define TUNSETDEBUG   _IOW('T', 201, int) 
-#define TUNSETIFF     _IOW('T', 202, int) 
-#define TUNSETPERSIST _IOW('T', 203, int) 
-#define TUNSETOWNER   _IOW('T', 204, int)
-#define TUNSETLINK    _IOW('T', 205, int)
-#define TUNSETGROUP   _IOW('T', 206, int)
-#define TUNGETFEATURES _IOR('T', 207, unsigned int)
-#define TUNSETOFFLOAD  _IOW('T', 208, unsigned int)
-#define TUNSETTXFILTER _IOW('T', 209, unsigned int)
-#define TUNGETIFF      _IOR('T', 210, unsigned int)
-#define TUNGETSNDBUF   _IOR('T', 211, int)
-#define TUNSETSNDBUF   _IOW('T', 212, int)
-#define TUNATTACHFILTER _IOW('T', 213, struct sock_fprog)
-#define TUNDETACHFILTER _IOW('T', 214, struct sock_fprog)
-#define TUNGETVNETHDRSZ _IOR('T', 215, int)
-#define TUNSETVNETHDRSZ _IOW('T', 216, int)
-
-/* TUNSETIFF ifr flags */
-#define IFF_TUN		0x0001
-#define IFF_TAP		0x0002
-#define IFF_NO_PI	0x1000
-#define IFF_ONE_QUEUE	0x2000
-#define IFF_VNET_HDR	0x4000
-#define IFF_TUN_EXCL	0x8000
-
-/* Features for GSO (TUNSETOFFLOAD). */
-#define TUN_F_CSUM	0x01	/* You can hand me unchecksummed packets. */
-#define TUN_F_TSO4	0x02	/* I can handle TSO for IPv4 packets */
-#define TUN_F_TSO6	0x04	/* I can handle TSO for IPv6 packets */
-#define TUN_F_TSO_ECN	0x08	/* I can handle TSO with ECN bits. */
-#define TUN_F_UFO	0x10	/* I can handle UFO packets */
-
-/* Protocol info prepended to the packets (when IFF_NO_PI is not set) */
-#define TUN_PKT_STRIP	0x0001
-struct tun_pi {
-	__u16  flags;
-	__be16 proto;
-};
-
-/*
- * Filter spec (used for SETXXFILTER ioctls)
- * This stuff is applicable only to the TAP (Ethernet) devices.
- * If the count is zero the filter is disabled and the driver accepts
- * all packets (promisc mode).
- * If the filter is enabled in order to accept broadcast packets
- * broadcast addr must be explicitly included in the addr list.
- */
-#define TUN_FLT_ALLMULTI 0x0001 /* Accept all multicast packets */
-struct tun_filter {
-	__u16  flags; /* TUN_FLT_ flags see above */
-	__u16  count; /* Number of addresses */
-	__u8   addr[0][ETH_ALEN];
-};
-
-#ifdef __KERNEL__
-#if defined(CONFIG_TUN) || defined(CONFIG_TUN_MODULE)
-struct socket *tun_get_socket(struct file *);
-#else
-#include <linux/err.h>
-#include <linux/errno.h>
-struct file;
-struct socket;
-static inline struct socket *tun_get_socket(struct file *f)
-{
-	return ERR_PTR(-EINVAL);
-}
-#endif /* CONFIG_TUN */
-#endif /* __KERNEL__ */
-#endif /* __IF_TUN_H */
diff --git a/ANDROID_3.4.5/include/linux/if_tunnel.h b/ANDROID_3.4.5/include/linux/if_tunnel.h
deleted file mode 100644
index 16b92d00..00000000
--- a/ANDROID_3.4.5/include/linux/if_tunnel.h
+++ /dev/null
@@ -1,83 +0,0 @@
-#ifndef _IF_TUNNEL_H_
-#define _IF_TUNNEL_H_
-
-#include <linux/types.h>
-#include <asm/byteorder.h>
-
-#ifdef __KERNEL__
-#include <linux/ip.h>
-#include <linux/in6.h>
-#endif
-
-#define SIOCGETTUNNEL   (SIOCDEVPRIVATE + 0)
-#define SIOCADDTUNNEL   (SIOCDEVPRIVATE + 1)
-#define SIOCDELTUNNEL   (SIOCDEVPRIVATE + 2)
-#define SIOCCHGTUNNEL   (SIOCDEVPRIVATE + 3)
-#define SIOCGETPRL      (SIOCDEVPRIVATE + 4)
-#define SIOCADDPRL      (SIOCDEVPRIVATE + 5)
-#define SIOCDELPRL      (SIOCDEVPRIVATE + 6)
-#define SIOCCHGPRL      (SIOCDEVPRIVATE + 7)
-#define SIOCGET6RD      (SIOCDEVPRIVATE + 8)
-#define SIOCADD6RD      (SIOCDEVPRIVATE + 9)
-#define SIOCDEL6RD      (SIOCDEVPRIVATE + 10)
-#define SIOCCHG6RD      (SIOCDEVPRIVATE + 11)
-
-#define GRE_CSUM	__cpu_to_be16(0x8000)
-#define GRE_ROUTING	__cpu_to_be16(0x4000)
-#define GRE_KEY		__cpu_to_be16(0x2000)
-#define GRE_SEQ		__cpu_to_be16(0x1000)
-#define GRE_STRICT	__cpu_to_be16(0x0800)
-#define GRE_REC		__cpu_to_be16(0x0700)
-#define GRE_FLAGS	__cpu_to_be16(0x00F8)
-#define GRE_VERSION	__cpu_to_be16(0x0007)
-
-struct ip_tunnel_parm {
-	char			name[IFNAMSIZ];
-	int			link;
-	__be16			i_flags;
-	__be16			o_flags;
-	__be32			i_key;
-	__be32			o_key;
-	struct iphdr		iph;
-};
-
-/* SIT-mode i_flags */
-#define	SIT_ISATAP	0x0001
-
-struct ip_tunnel_prl {
-	__be32			addr;
-	__u16			flags;
-	__u16			__reserved;
-	__u32			datalen;
-	__u32			__reserved2;
-	/* data follows */
-};
-
-/* PRL flags */
-#define	PRL_DEFAULT		0x0001
-
-struct ip_tunnel_6rd {
-	struct in6_addr		prefix;
-	__be32			relay_prefix;
-	__u16			prefixlen;
-	__u16			relay_prefixlen;
-};
-
-enum {
-	IFLA_GRE_UNSPEC,
-	IFLA_GRE_LINK,
-	IFLA_GRE_IFLAGS,
-	IFLA_GRE_OFLAGS,
-	IFLA_GRE_IKEY,
-	IFLA_GRE_OKEY,
-	IFLA_GRE_LOCAL,
-	IFLA_GRE_REMOTE,
-	IFLA_GRE_TTL,
-	IFLA_GRE_TOS,
-	IFLA_GRE_PMTUDISC,
-	__IFLA_GRE_MAX,
-};
-
-#define IFLA_GRE_MAX	(__IFLA_GRE_MAX - 1)
-
-#endif /* _IF_TUNNEL_H_ */
diff --git a/ANDROID_3.4.5/include/linux/if_vlan.h b/ANDROID_3.4.5/include/linux/if_vlan.h
deleted file mode 100644
index a810987c..00000000
--- a/ANDROID_3.4.5/include/linux/if_vlan.h
+++ /dev/null
@@ -1,407 +0,0 @@
-/*
- * VLAN		An implementation of 802.1Q VLAN tagging.
- *
- * Authors:	Ben Greear <greearb@candelatech.com>
- *
- *		This program is free software; you can redistribute it and/or
- *		modify it under the terms of the GNU General Public License
- *		as published by the Free Software Foundation; either version
- *		2 of the License, or (at your option) any later version.
- *
- */
-
-#ifndef _LINUX_IF_VLAN_H_
-#define _LINUX_IF_VLAN_H_
-
-#ifdef __KERNEL__
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/rtnetlink.h>
-#include <linux/bug.h>
-
-#define VLAN_HLEN	4		/* The additional bytes required by VLAN
-					 * (in addition to the Ethernet header)
-					 */
-#define VLAN_ETH_HLEN	18		/* Total octets in header.	 */
-#define VLAN_ETH_ZLEN	64		/* Min. octets in frame sans FCS */
-
-/*
- * According to 802.3ac, the packet can be 4 bytes longer. --Klika Jan
- */
-#define VLAN_ETH_DATA_LEN	1500	/* Max. octets in payload	 */
-#define VLAN_ETH_FRAME_LEN	1518	/* Max. octets in frame sans FCS */
-
-/*
- * 	struct vlan_hdr - vlan header
- * 	@h_vlan_TCI: priority and VLAN ID
- *	@h_vlan_encapsulated_proto: packet type ID or len
- */
-struct vlan_hdr {
-	__be16	h_vlan_TCI;
-	__be16	h_vlan_encapsulated_proto;
-};
-
-/**
- *	struct vlan_ethhdr - vlan ethernet header (ethhdr + vlan_hdr)
- *	@h_dest: destination ethernet address
- *	@h_source: source ethernet address
- *	@h_vlan_proto: ethernet protocol (always 0x8100)
- *	@h_vlan_TCI: priority and VLAN ID
- *	@h_vlan_encapsulated_proto: packet type ID or len
- */
-struct vlan_ethhdr {
-	unsigned char	h_dest[ETH_ALEN];
-	unsigned char	h_source[ETH_ALEN];
-	__be16		h_vlan_proto;
-	__be16		h_vlan_TCI;
-	__be16		h_vlan_encapsulated_proto;
-};
-
-#include <linux/skbuff.h>
-
-static inline struct vlan_ethhdr *vlan_eth_hdr(const struct sk_buff *skb)
-{
-	return (struct vlan_ethhdr *)skb_mac_header(skb);
-}
-
-#define VLAN_PRIO_MASK		0xe000 /* Priority Code Point */
-#define VLAN_PRIO_SHIFT		13
-#define VLAN_CFI_MASK		0x1000 /* Canonical Format Indicator */
-#define VLAN_TAG_PRESENT	VLAN_CFI_MASK
-#define VLAN_VID_MASK		0x0fff /* VLAN Identifier */
-#define VLAN_N_VID		4096
-
-/* found in socket.c */
-extern void vlan_ioctl_set(int (*hook)(struct net *, void __user *));
-
-struct vlan_info;
-
-static inline int is_vlan_dev(struct net_device *dev)
-{
-        return dev->priv_flags & IFF_802_1Q_VLAN;
-}
-
-#define vlan_tx_tag_present(__skb)	((__skb)->vlan_tci & VLAN_TAG_PRESENT)
-#define vlan_tx_tag_get(__skb)		((__skb)->vlan_tci & ~VLAN_TAG_PRESENT)
-
-#if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE)
-
-extern struct net_device *__vlan_find_dev_deep(struct net_device *real_dev,
-					       u16 vlan_id);
-extern struct net_device *vlan_dev_real_dev(const struct net_device *dev);
-extern u16 vlan_dev_vlan_id(const struct net_device *dev);
-
-extern bool vlan_do_receive(struct sk_buff **skb, bool last_handler);
-extern struct sk_buff *vlan_untag(struct sk_buff *skb);
-
-extern int vlan_vid_add(struct net_device *dev, unsigned short vid);
-extern void vlan_vid_del(struct net_device *dev, unsigned short vid);
-
-extern int vlan_vids_add_by_dev(struct net_device *dev,
-				const struct net_device *by_dev);
-extern void vlan_vids_del_by_dev(struct net_device *dev,
-				 const struct net_device *by_dev);
-#else
-static inline struct net_device *
-__vlan_find_dev_deep(struct net_device *real_dev, u16 vlan_id)
-{
-	return NULL;
-}
-
-static inline struct net_device *vlan_dev_real_dev(const struct net_device *dev)
-{
-	BUG();
-	return NULL;
-}
-
-static inline u16 vlan_dev_vlan_id(const struct net_device *dev)
-{
-	BUG();
-	return 0;
-}
-
-static inline bool vlan_do_receive(struct sk_buff **skb, bool last_handler)
-{
-	if (((*skb)->vlan_tci & VLAN_VID_MASK) && last_handler)
-		(*skb)->pkt_type = PACKET_OTHERHOST;
-	return false;
-}
-
-static inline struct sk_buff *vlan_untag(struct sk_buff *skb)
-{
-	return skb;
-}
-
-static inline int vlan_vid_add(struct net_device *dev, unsigned short vid)
-{
-	return 0;
-}
-
-static inline void vlan_vid_del(struct net_device *dev, unsigned short vid)
-{
-}
-
-static inline int vlan_vids_add_by_dev(struct net_device *dev,
-				       const struct net_device *by_dev)
-{
-	return 0;
-}
-
-static inline void vlan_vids_del_by_dev(struct net_device *dev,
-					const struct net_device *by_dev)
-{
-}
-#endif
-
-/**
- * vlan_insert_tag - regular VLAN tag inserting
- * @skb: skbuff to tag
- * @vlan_tci: VLAN TCI to insert
- *
- * Inserts the VLAN tag into @skb as part of the payload
- * Returns a VLAN tagged skb. If a new skb is created, @skb is freed.
- *
- * Following the skb_unshare() example, in case of error, the calling function
- * doesn't have to worry about freeing the original skb.
- *
- * Does not change skb->protocol so this function can be used during receive.
- */
-static inline struct sk_buff *vlan_insert_tag(struct sk_buff *skb, u16 vlan_tci)
-{
-	struct vlan_ethhdr *veth;
-
-	if (skb_cow_head(skb, VLAN_HLEN) < 0) {
-		kfree_skb(skb);
-		return NULL;
-	}
-	veth = (struct vlan_ethhdr *)skb_push(skb, VLAN_HLEN);
-
-	/* Move the mac addresses to the beginning of the new header. */
-	memmove(skb->data, skb->data + VLAN_HLEN, 2 * ETH_ALEN);
-	skb->mac_header -= VLAN_HLEN;
-
-	/* first, the ethernet type */
-	veth->h_vlan_proto = htons(ETH_P_8021Q);
-
-	/* now, the TCI */
-	veth->h_vlan_TCI = htons(vlan_tci);
-
-	return skb;
-}
-
-/**
- * __vlan_put_tag - regular VLAN tag inserting
- * @skb: skbuff to tag
- * @vlan_tci: VLAN TCI to insert
- *
- * Inserts the VLAN tag into @skb as part of the payload
- * Returns a VLAN tagged skb. If a new skb is created, @skb is freed.
- *
- * Following the skb_unshare() example, in case of error, the calling function
- * doesn't have to worry about freeing the original skb.
- */
-static inline struct sk_buff *__vlan_put_tag(struct sk_buff *skb, u16 vlan_tci)
-{
-	skb = vlan_insert_tag(skb, vlan_tci);
-	if (skb)
-		skb->protocol = htons(ETH_P_8021Q);
-	return skb;
-}
-
-/**
- * __vlan_hwaccel_put_tag - hardware accelerated VLAN inserting
- * @skb: skbuff to tag
- * @vlan_tci: VLAN TCI to insert
- *
- * Puts the VLAN TCI in @skb->vlan_tci and lets the device do the rest
- */
-static inline struct sk_buff *__vlan_hwaccel_put_tag(struct sk_buff *skb,
-						     u16 vlan_tci)
-{
-	skb->vlan_tci = VLAN_TAG_PRESENT | vlan_tci;
-	return skb;
-}
-
-#define HAVE_VLAN_PUT_TAG
-
-/**
- * vlan_put_tag - inserts VLAN tag according to device features
- * @skb: skbuff to tag
- * @vlan_tci: VLAN TCI to insert
- *
- * Assumes skb->dev is the target that will xmit this frame.
- * Returns a VLAN tagged skb.
- */
-static inline struct sk_buff *vlan_put_tag(struct sk_buff *skb, u16 vlan_tci)
-{
-	if (skb->dev->features & NETIF_F_HW_VLAN_TX) {
-		return __vlan_hwaccel_put_tag(skb, vlan_tci);
-	} else {
-		return __vlan_put_tag(skb, vlan_tci);
-	}
-}
-
-/**
- * __vlan_get_tag - get the VLAN ID that is part of the payload
- * @skb: skbuff to query
- * @vlan_tci: buffer to store vlaue
- *
- * Returns error if the skb is not of VLAN type
- */
-static inline int __vlan_get_tag(const struct sk_buff *skb, u16 *vlan_tci)
-{
-	struct vlan_ethhdr *veth = (struct vlan_ethhdr *)skb->data;
-
-	if (veth->h_vlan_proto != htons(ETH_P_8021Q)) {
-		return -EINVAL;
-	}
-
-	*vlan_tci = ntohs(veth->h_vlan_TCI);
-	return 0;
-}
-
-/**
- * __vlan_hwaccel_get_tag - get the VLAN ID that is in @skb->cb[]
- * @skb: skbuff to query
- * @vlan_tci: buffer to store vlaue
- *
- * Returns error if @skb->vlan_tci is not set correctly
- */
-static inline int __vlan_hwaccel_get_tag(const struct sk_buff *skb,
-					 u16 *vlan_tci)
-{
-	if (vlan_tx_tag_present(skb)) {
-		*vlan_tci = vlan_tx_tag_get(skb);
-		return 0;
-	} else {
-		*vlan_tci = 0;
-		return -EINVAL;
-	}
-}
-
-#define HAVE_VLAN_GET_TAG
-
-/**
- * vlan_get_tag - get the VLAN ID from the skb
- * @skb: skbuff to query
- * @vlan_tci: buffer to store vlaue
- *
- * Returns error if the skb is not VLAN tagged
- */
-static inline int vlan_get_tag(const struct sk_buff *skb, u16 *vlan_tci)
-{
-	if (skb->dev->features & NETIF_F_HW_VLAN_TX) {
-		return __vlan_hwaccel_get_tag(skb, vlan_tci);
-	} else {
-		return __vlan_get_tag(skb, vlan_tci);
-	}
-}
-
-/**
- * vlan_get_protocol - get protocol EtherType.
- * @skb: skbuff to query
- *
- * Returns the EtherType of the packet, regardless of whether it is
- * vlan encapsulated (normal or hardware accelerated) or not.
- */
-static inline __be16 vlan_get_protocol(const struct sk_buff *skb)
-{
-	__be16 protocol = 0;
-
-	if (vlan_tx_tag_present(skb) ||
-	     skb->protocol != cpu_to_be16(ETH_P_8021Q))
-		protocol = skb->protocol;
-	else {
-		__be16 proto, *protop;
-		protop = skb_header_pointer(skb, offsetof(struct vlan_ethhdr,
-						h_vlan_encapsulated_proto),
-						sizeof(proto), &proto);
-		if (likely(protop))
-			protocol = *protop;
-	}
-
-	return protocol;
-}
-
-static inline void vlan_set_encap_proto(struct sk_buff *skb,
-					struct vlan_hdr *vhdr)
-{
-	__be16 proto;
-	unsigned char *rawp;
-
-	/*
-	 * Was a VLAN packet, grab the encapsulated protocol, which the layer
-	 * three protocols care about.
-	 */
-
-	proto = vhdr->h_vlan_encapsulated_proto;
-	if (ntohs(proto) >= 1536) {
-		skb->protocol = proto;
-		return;
-	}
-
-	rawp = skb->data;
-	if (*(unsigned short *) rawp == 0xFFFF)
-		/*
-		 * This is a magic hack to spot IPX packets. Older Novell
-		 * breaks the protocol design and runs IPX over 802.3 without
-		 * an 802.2 LLC layer. We look for FFFF which isn't a used
-		 * 802.2 SSAP/DSAP. This won't work for fault tolerant netware
-		 * but does for the rest.
-		 */
-		skb->protocol = htons(ETH_P_802_3);
-	else
-		/*
-		 * Real 802.2 LLC
-		 */
-		skb->protocol = htons(ETH_P_802_2);
-}
-#endif /* __KERNEL__ */
-
-/* VLAN IOCTLs are found in sockios.h */
-
-/* Passed in vlan_ioctl_args structure to determine behaviour. */
-enum vlan_ioctl_cmds {
-	ADD_VLAN_CMD,
-	DEL_VLAN_CMD,
-	SET_VLAN_INGRESS_PRIORITY_CMD,
-	SET_VLAN_EGRESS_PRIORITY_CMD,
-	GET_VLAN_INGRESS_PRIORITY_CMD,
-	GET_VLAN_EGRESS_PRIORITY_CMD,
-	SET_VLAN_NAME_TYPE_CMD,
-	SET_VLAN_FLAG_CMD,
-	GET_VLAN_REALDEV_NAME_CMD, /* If this works, you know it's a VLAN device, btw */
-	GET_VLAN_VID_CMD /* Get the VID of this VLAN (specified by name) */
-};
-
-enum vlan_flags {
-	VLAN_FLAG_REORDER_HDR	= 0x1,
-	VLAN_FLAG_GVRP		= 0x2,
-	VLAN_FLAG_LOOSE_BINDING	= 0x4,
-};
-
-enum vlan_name_types {
-	VLAN_NAME_TYPE_PLUS_VID, /* Name will look like:  vlan0005 */
-	VLAN_NAME_TYPE_RAW_PLUS_VID, /* name will look like:  eth1.0005 */
-	VLAN_NAME_TYPE_PLUS_VID_NO_PAD, /* Name will look like:  vlan5 */
-	VLAN_NAME_TYPE_RAW_PLUS_VID_NO_PAD, /* Name will look like:  eth0.5 */
-	VLAN_NAME_TYPE_HIGHEST
-};
-
-struct vlan_ioctl_args {
-	int cmd; /* Should be one of the vlan_ioctl_cmds enum above. */
-	char device1[24];
-
-        union {
-		char device2[24];
-		int VID;
-		unsigned int skb_priority;
-		unsigned int name_type;
-		unsigned int bind_type;
-		unsigned int flag; /* Matches vlan_dev_priv flags */
-        } u;
-
-	short vlan_qos;   
-};
-
-#endif /* !(_LINUX_IF_VLAN_H_) */
diff --git a/ANDROID_3.4.5/include/linux/if_x25.h b/ANDROID_3.4.5/include/linux/if_x25.h
deleted file mode 100644
index 897765f5..00000000
--- a/ANDROID_3.4.5/include/linux/if_x25.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- *  Linux X.25 packet to device interface
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- *  GNU General Public License for more details.
- */
-
-#ifndef _IF_X25_H
-#define _IF_X25_H
-
-#include <linux/types.h>
-
-/* Documentation/networking/x25-iface.txt */
-#define X25_IFACE_DATA		0x00
-#define X25_IFACE_CONNECT	0x01
-#define X25_IFACE_DISCONNECT	0x02
-#define X25_IFACE_PARAMS	0x03
-
-#endif /* _IF_X25_H */
diff --git a/ANDROID_3.4.5/include/linux/igmp.h b/ANDROID_3.4.5/include/linux/igmp.h
deleted file mode 100644
index 82de336b..00000000
--- a/ANDROID_3.4.5/include/linux/igmp.h
+++ /dev/null
@@ -1,244 +0,0 @@
-/*
- *	Linux NET3:	Internet Group Management Protocol  [IGMP]
- *
- *	Authors:
- *		Alan Cox <alan@lxorguk.ukuu.org.uk>
- *
- *	Extended to talk the BSD extended IGMP protocol of mrouted 3.6
- *
- *
- *	This program is free software; you can redistribute it and/or
- *	modify it under the terms of the GNU General Public License
- *	as published by the Free Software Foundation; either version
- *	2 of the License, or (at your option) any later version.
- */
-
-#ifndef _LINUX_IGMP_H
-#define _LINUX_IGMP_H
-
-#include <linux/types.h>
-#include <asm/byteorder.h>
-
-/*
- *	IGMP protocol structures
- */
-
-/*
- *	Header in on cable format
- */
-
-struct igmphdr {
-	__u8 type;
-	__u8 code;		/* For newer IGMP */
-	__sum16 csum;
-	__be32 group;
-};
-
-/* V3 group record types [grec_type] */
-#define IGMPV3_MODE_IS_INCLUDE		1
-#define IGMPV3_MODE_IS_EXCLUDE		2
-#define IGMPV3_CHANGE_TO_INCLUDE	3
-#define IGMPV3_CHANGE_TO_EXCLUDE	4
-#define IGMPV3_ALLOW_NEW_SOURCES	5
-#define IGMPV3_BLOCK_OLD_SOURCES	6
-
-struct igmpv3_grec {
-	__u8	grec_type;
-	__u8	grec_auxwords;
-	__be16	grec_nsrcs;
-	__be32	grec_mca;
-	__be32	grec_src[0];
-};
-
-struct igmpv3_report {
-	__u8 type;
-	__u8 resv1;
-	__be16 csum;
-	__be16 resv2;
-	__be16 ngrec;
-	struct igmpv3_grec grec[0];
-};
-
-struct igmpv3_query {
-	__u8 type;
-	__u8 code;
-	__be16 csum;
-	__be32 group;
-#if defined(__LITTLE_ENDIAN_BITFIELD)
-	__u8 qrv:3,
-	     suppress:1,
-	     resv:4;
-#elif defined(__BIG_ENDIAN_BITFIELD)
-	__u8 resv:4,
-	     suppress:1,
-	     qrv:3;
-#else
-#error "Please fix <asm/byteorder.h>"
-#endif
-	__u8 qqic;
-	__be16 nsrcs;
-	__be32 srcs[0];
-};
-
-#define IGMP_HOST_MEMBERSHIP_QUERY	0x11	/* From RFC1112 */
-#define IGMP_HOST_MEMBERSHIP_REPORT	0x12	/* Ditto */
-#define IGMP_DVMRP			0x13	/* DVMRP routing */
-#define IGMP_PIM			0x14	/* PIM routing */
-#define IGMP_TRACE			0x15
-#define IGMPV2_HOST_MEMBERSHIP_REPORT	0x16	/* V2 version of 0x12 */
-#define IGMP_HOST_LEAVE_MESSAGE 	0x17
-#define IGMPV3_HOST_MEMBERSHIP_REPORT	0x22	/* V3 version of 0x12 */
-
-#define IGMP_MTRACE_RESP		0x1e
-#define IGMP_MTRACE			0x1f
-
-
-/*
- *	Use the BSD names for these for compatibility
- */
-
-#define IGMP_DELAYING_MEMBER		0x01
-#define IGMP_IDLE_MEMBER		0x02
-#define IGMP_LAZY_MEMBER		0x03
-#define IGMP_SLEEPING_MEMBER		0x04
-#define IGMP_AWAKENING_MEMBER		0x05
-
-#define IGMP_MINLEN			8
-
-#define IGMP_MAX_HOST_REPORT_DELAY	10	/* max delay for response to */
-						/* query (in seconds)	*/
-
-#define IGMP_TIMER_SCALE		10	/* denotes that the igmphdr->timer field */
-						/* specifies time in 10th of seconds	 */
-
-#define IGMP_AGE_THRESHOLD		400	/* If this host don't hear any IGMP V1	*/
-						/* message in this period of time,	*/
-						/* revert to IGMP v2 router.		*/
-
-#define IGMP_ALL_HOSTS		htonl(0xE0000001L)
-#define IGMP_ALL_ROUTER 	htonl(0xE0000002L)
-#define IGMPV3_ALL_MCR	 	htonl(0xE0000016L)
-#define IGMP_LOCAL_GROUP	htonl(0xE0000000L)
-#define IGMP_LOCAL_GROUP_MASK	htonl(0xFFFFFF00L)
-
-/*
- * struct for keeping the multicast list in
- */
-
-#ifdef __KERNEL__
-#include <linux/skbuff.h>
-#include <linux/timer.h>
-#include <linux/in.h>
-
-static inline struct igmphdr *igmp_hdr(const struct sk_buff *skb)
-{
-	return (struct igmphdr *)skb_transport_header(skb);
-}
-
-static inline struct igmpv3_report *
-			igmpv3_report_hdr(const struct sk_buff *skb)
-{
-	return (struct igmpv3_report *)skb_transport_header(skb);
-}
-
-static inline struct igmpv3_query *
-			igmpv3_query_hdr(const struct sk_buff *skb)
-{
-	return (struct igmpv3_query *)skb_transport_header(skb);
-}
-
-extern int sysctl_igmp_max_memberships;
-extern int sysctl_igmp_max_msf;
-
-struct ip_sf_socklist {
-	unsigned int		sl_max;
-	unsigned int		sl_count;
-	struct rcu_head		rcu;
-	__be32			sl_addr[0];
-};
-
-#define IP_SFLSIZE(count)	(sizeof(struct ip_sf_socklist) + \
-	(count) * sizeof(__be32))
-
-#define IP_SFBLOCK	10	/* allocate this many at once */
-
-/* ip_mc_socklist is real list now. Speed is not argument;
-   this list never used in fast path code
- */
-
-struct ip_mc_socklist {
-	struct ip_mc_socklist __rcu *next_rcu;
-	struct ip_mreqn		multi;
-	unsigned int		sfmode;		/* MCAST_{INCLUDE,EXCLUDE} */
-	struct ip_sf_socklist __rcu	*sflist;
-	struct rcu_head		rcu;
-};
-
-struct ip_sf_list {
-	struct ip_sf_list	*sf_next;
-	__be32			sf_inaddr;
-	unsigned long		sf_count[2];	/* include/exclude counts */
-	unsigned char		sf_gsresp;	/* include in g & s response? */
-	unsigned char		sf_oldin;	/* change state */
-	unsigned char		sf_crcount;	/* retrans. left to send */
-};
-
-struct ip_mc_list {
-	struct in_device	*interface;
-	__be32			multiaddr;
-	unsigned int		sfmode;
-	struct ip_sf_list	*sources;
-	struct ip_sf_list	*tomb;
-	unsigned long		sfcount[2];
-	union {
-		struct ip_mc_list *next;
-		struct ip_mc_list __rcu *next_rcu;
-	};
-	struct timer_list	timer;
-	int			users;
-	atomic_t		refcnt;
-	spinlock_t		lock;
-	char			tm_running;
-	char			reporter;
-	char			unsolicit_count;
-	char			loaded;
-	unsigned char		gsquery;	/* check source marks? */
-	unsigned char		crcount;
-	struct rcu_head		rcu;
-};
-
-/* V3 exponential field decoding */
-#define IGMPV3_MASK(value, nb) ((nb)>=32 ? (value) : ((1<<(nb))-1) & (value))
-#define IGMPV3_EXP(thresh, nbmant, nbexp, value) \
-	((value) < (thresh) ? (value) : \
-        ((IGMPV3_MASK(value, nbmant) | (1<<(nbmant))) << \
-         (IGMPV3_MASK((value) >> (nbmant), nbexp) + (nbexp))))
-
-#define IGMPV3_QQIC(value) IGMPV3_EXP(0x80, 4, 3, value)
-#define IGMPV3_MRC(value) IGMPV3_EXP(0x80, 4, 3, value)
-
-extern int ip_check_mc_rcu(struct in_device *dev, __be32 mc_addr, __be32 src_addr, u16 proto);
-extern int igmp_rcv(struct sk_buff *);
-extern int ip_mc_join_group(struct sock *sk, struct ip_mreqn *imr);
-extern int ip_mc_leave_group(struct sock *sk, struct ip_mreqn *imr);
-extern void ip_mc_drop_socket(struct sock *sk);
-extern int ip_mc_source(int add, int omode, struct sock *sk,
-		struct ip_mreq_source *mreqs, int ifindex);
-extern int ip_mc_msfilter(struct sock *sk, struct ip_msfilter *msf,int ifindex);
-extern int ip_mc_msfget(struct sock *sk, struct ip_msfilter *msf,
-		struct ip_msfilter __user *optval, int __user *optlen);
-extern int ip_mc_gsfget(struct sock *sk, struct group_filter *gsf,
-		struct group_filter __user *optval, int __user *optlen);
-extern int ip_mc_sf_allow(struct sock *sk, __be32 local, __be32 rmt, int dif);
-extern void ip_mc_init_dev(struct in_device *);
-extern void ip_mc_destroy_dev(struct in_device *);
-extern void ip_mc_up(struct in_device *);
-extern void ip_mc_down(struct in_device *);
-extern void ip_mc_unmap(struct in_device *);
-extern void ip_mc_remap(struct in_device *);
-extern void ip_mc_dec_group(struct in_device *in_dev, __be32 addr);
-extern void ip_mc_inc_group(struct in_device *in_dev, __be32 addr);
-extern void ip_mc_rejoin_groups(struct in_device *in_dev);
-
-#endif
-#endif
diff --git a/ANDROID_3.4.5/include/linux/ihex.h b/ANDROID_3.4.5/include/linux/ihex.h
deleted file mode 100644
index 31d8629e..00000000
--- a/ANDROID_3.4.5/include/linux/ihex.h
+++ /dev/null
@@ -1,74 +0,0 @@
-/*
- * Compact binary representation of ihex records. Some devices need their
- * firmware loaded in strange orders rather than a single big blob, but
- * actually parsing ihex-as-text within the kernel seems silly. Thus,...
- */
-
-#ifndef __LINUX_IHEX_H__
-#define __LINUX_IHEX_H__
-
-#include <linux/types.h>
-#include <linux/firmware.h>
-#include <linux/device.h>
-
-/* Intel HEX files actually limit the length to 256 bytes, but we have
-   drivers which would benefit from using separate records which are
-   longer than that, so we extend to 16 bits of length */
-struct ihex_binrec {
-	__be32 addr;
-	__be16 len;
-	uint8_t data[0];
-} __attribute__((packed));
-
-/* Find the next record, taking into account the 4-byte alignment */
-static inline const struct ihex_binrec *
-ihex_next_binrec(const struct ihex_binrec *rec)
-{
-	int next = ((be16_to_cpu(rec->len) + 5) & ~3) - 2;
-	rec = (void *)&rec->data[next];
-
-	return be16_to_cpu(rec->len) ? rec : NULL;
-}
-
-/* Check that ihex_next_binrec() won't take us off the end of the image... */
-static inline int ihex_validate_fw(const struct firmware *fw)
-{
-	const struct ihex_binrec *rec;
-	size_t ofs = 0;
-
-	while (ofs <= fw->size - sizeof(*rec)) {
-		rec = (void *)&fw->data[ofs];
-
-		/* Zero length marks end of records */
-		if (!be16_to_cpu(rec->len))
-			return 0;
-
-		/* Point to next record... */
-		ofs += (sizeof(*rec) + be16_to_cpu(rec->len) + 3) & ~3;
-	}
-	return -EINVAL;
-}
-
-/* Request firmware and validate it so that we can trust we won't
- * run off the end while reading records... */
-static inline int request_ihex_firmware(const struct firmware **fw,
-					const char *fw_name,
-					struct device *dev)
-{
-	const struct firmware *lfw;
-	int ret;
-
-	ret = request_firmware(&lfw, fw_name, dev);
-	if (ret)
-		return ret;
-	ret = ihex_validate_fw(lfw);
-	if (ret) {
-		dev_err(dev, "Firmware \"%s\" not valid IHEX records\n",
-			fw_name);
-		release_firmware(lfw);
-		return ret;
-	}
-	*fw = lfw;
-	return 0;
-}
-#endif /* __LINUX_IHEX_H__ */
diff --git a/ANDROID_3.4.5/include/linux/ima.h b/ANDROID_3.4.5/include/linux/ima.h
deleted file mode 100644
index 6ac8e50c..00000000
--- a/ANDROID_3.4.5/include/linux/ima.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * Copyright (C) 2008 IBM Corporation
- * Author: Mimi Zohar <zohar@us.ibm.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, version 2 of the License.
- */
-
-#ifndef _LINUX_IMA_H
-#define _LINUX_IMA_H
-
-#include <linux/fs.h>
-struct linux_binprm;
-
-#ifdef CONFIG_IMA
-extern int ima_bprm_check(struct linux_binprm *bprm);
-extern int ima_file_check(struct file *file, int mask);
-extern void ima_file_free(struct file *file);
-extern int ima_file_mmap(struct file *file, unsigned long prot);
-
-#else
-static inline int ima_bprm_check(struct linux_binprm *bprm)
-{
-	return 0;
-}
-
-static inline int ima_file_check(struct file *file, int mask)
-{
-	return 0;
-}
-
-static inline void ima_file_free(struct file *file)
-{
-	return;
-}
-
-static inline int ima_file_mmap(struct file *file, unsigned long prot)
-{
-	return 0;
-}
-#endif /* CONFIG_IMA_H */
-#endif /* _LINUX_IMA_H */
diff --git a/ANDROID_3.4.5/include/linux/in.h b/ANDROID_3.4.5/include/linux/in.h
deleted file mode 100644
index e0337f11..00000000
--- a/ANDROID_3.4.5/include/linux/in.h
+++ /dev/null
@@ -1,337 +0,0 @@
-/*
- * INET		An implementation of the TCP/IP protocol suite for the LINUX
- *		operating system.  INET is implemented using the  BSD Socket
- *		interface as the means of communication with the user level.
- *
- *		Definitions of the Internet Protocol.
- *
- * Version:	@(#)in.h	1.0.1	04/21/93
- *
- * Authors:	Original taken from the GNU Project <netinet/in.h> file.
- *		Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
- *
- *		This program is free software; you can redistribute it and/or
- *		modify it under the terms of the GNU General Public License
- *		as published by the Free Software Foundation; either version
- *		2 of the License, or (at your option) any later version.
- */
-#ifndef _LINUX_IN_H
-#define _LINUX_IN_H
-
-#include <linux/types.h>
-#include <linux/socket.h>
-
-/* Standard well-defined IP protocols.  */
-enum {
-  IPPROTO_IP = 0,		/* Dummy protocol for TCP		*/
-  IPPROTO_ICMP = 1,		/* Internet Control Message Protocol	*/
-  IPPROTO_IGMP = 2,		/* Internet Group Management Protocol	*/
-  IPPROTO_IPIP = 4,		/* IPIP tunnels (older KA9Q tunnels use 94) */
-  IPPROTO_TCP = 6,		/* Transmission Control Protocol	*/
-  IPPROTO_EGP = 8,		/* Exterior Gateway Protocol		*/
-  IPPROTO_PUP = 12,		/* PUP protocol				*/
-  IPPROTO_UDP = 17,		/* User Datagram Protocol		*/
-  IPPROTO_IDP = 22,		/* XNS IDP protocol			*/
-  IPPROTO_DCCP = 33,		/* Datagram Congestion Control Protocol */
-  IPPROTO_RSVP = 46,		/* RSVP protocol			*/
-  IPPROTO_GRE = 47,		/* Cisco GRE tunnels (rfc 1701,1702)	*/
-
-  IPPROTO_IPV6	 = 41,		/* IPv6-in-IPv4 tunnelling		*/
-
-  IPPROTO_ESP = 50,            /* Encapsulation Security Payload protocol */
-  IPPROTO_AH = 51,             /* Authentication Header protocol       */
-  IPPROTO_BEETPH = 94,	       /* IP option pseudo header for BEET */
-  IPPROTO_PIM    = 103,		/* Protocol Independent Multicast	*/
-
-  IPPROTO_COMP   = 108,                /* Compression Header protocol */
-  IPPROTO_SCTP   = 132,		/* Stream Control Transport Protocol	*/
-  IPPROTO_UDPLITE = 136,	/* UDP-Lite (RFC 3828)			*/
-
-  IPPROTO_RAW	 = 255,		/* Raw IP packets			*/
-  IPPROTO_MAX
-};
-
-
-/* Internet address. */
-struct in_addr {
-	__be32	s_addr;
-};
-
-#define IP_TOS		1
-#define IP_TTL		2
-#define IP_HDRINCL	3
-#define IP_OPTIONS	4
-#define IP_ROUTER_ALERT	5
-#define IP_RECVOPTS	6
-#define IP_RETOPTS	7
-#define IP_PKTINFO	8
-#define IP_PKTOPTIONS	9
-#define IP_MTU_DISCOVER	10
-#define IP_RECVERR	11
-#define IP_RECVTTL	12
-#define	IP_RECVTOS	13
-#define IP_MTU		14
-#define IP_FREEBIND	15
-#define IP_IPSEC_POLICY	16
-#define IP_XFRM_POLICY	17
-#define IP_PASSSEC	18
-#define IP_TRANSPARENT	19
-
-/* BSD compatibility */
-#define IP_RECVRETOPTS	IP_RETOPTS
-
-/* TProxy original addresses */
-#define IP_ORIGDSTADDR       20
-#define IP_RECVORIGDSTADDR   IP_ORIGDSTADDR
-
-#define IP_MINTTL       21
-#define IP_NODEFRAG     22
-
-/* IP_MTU_DISCOVER values */
-#define IP_PMTUDISC_DONT		0	/* Never send DF frames */
-#define IP_PMTUDISC_WANT		1	/* Use per route hints	*/
-#define IP_PMTUDISC_DO			2	/* Always DF		*/
-#define IP_PMTUDISC_PROBE		3       /* Ignore dst pmtu      */
-
-#define IP_MULTICAST_IF			32
-#define IP_MULTICAST_TTL 		33
-#define IP_MULTICAST_LOOP 		34
-#define IP_ADD_MEMBERSHIP		35
-#define IP_DROP_MEMBERSHIP		36
-#define IP_UNBLOCK_SOURCE		37
-#define IP_BLOCK_SOURCE			38
-#define IP_ADD_SOURCE_MEMBERSHIP	39
-#define IP_DROP_SOURCE_MEMBERSHIP	40
-#define IP_MSFILTER			41
-#define MCAST_JOIN_GROUP		42
-#define MCAST_BLOCK_SOURCE		43
-#define MCAST_UNBLOCK_SOURCE		44
-#define MCAST_LEAVE_GROUP		45
-#define MCAST_JOIN_SOURCE_GROUP		46
-#define MCAST_LEAVE_SOURCE_GROUP	47
-#define MCAST_MSFILTER			48
-#define IP_MULTICAST_ALL		49
-#define IP_UNICAST_IF			50
-
-#define MCAST_EXCLUDE	0
-#define MCAST_INCLUDE	1
-
-/* These need to appear somewhere around here */
-#define IP_DEFAULT_MULTICAST_TTL        1
-#define IP_DEFAULT_MULTICAST_LOOP       1
-
-/* Request struct for multicast socket ops */
-
-struct ip_mreq  {
-	struct in_addr imr_multiaddr;	/* IP multicast address of group */
-	struct in_addr imr_interface;	/* local IP address of interface */
-};
-
-struct ip_mreqn {
-	struct in_addr	imr_multiaddr;		/* IP multicast address of group */
-	struct in_addr	imr_address;		/* local IP address of interface */
-	int		imr_ifindex;		/* Interface index */
-};
-
-struct ip_mreq_source {
-	__be32		imr_multiaddr;
-	__be32		imr_interface;
-	__be32		imr_sourceaddr;
-};
-
-struct ip_msfilter {
-	__be32		imsf_multiaddr;
-	__be32		imsf_interface;
-	__u32		imsf_fmode;
-	__u32		imsf_numsrc;
-	__be32		imsf_slist[1];
-};
-
-#define IP_MSFILTER_SIZE(numsrc) \
-	(sizeof(struct ip_msfilter) - sizeof(__u32) \
-	+ (numsrc) * sizeof(__u32))
-
-struct group_req {
-	__u32				 gr_interface;	/* interface index */
-	struct __kernel_sockaddr_storage gr_group;	/* group address */
-};
-
-struct group_source_req {
-	__u32				 gsr_interface;	/* interface index */
-	struct __kernel_sockaddr_storage gsr_group;	/* group address */
-	struct __kernel_sockaddr_storage gsr_source;	/* source address */
-};
-
-struct group_filter {
-	__u32				 gf_interface;	/* interface index */
-	struct __kernel_sockaddr_storage gf_group;	/* multicast address */
-	__u32				 gf_fmode;	/* filter mode */
-	__u32				 gf_numsrc;	/* number of sources */
-	struct __kernel_sockaddr_storage gf_slist[1];	/* interface index */
-};
-
-#define GROUP_FILTER_SIZE(numsrc) \
-	(sizeof(struct group_filter) - sizeof(struct __kernel_sockaddr_storage) \
-	+ (numsrc) * sizeof(struct __kernel_sockaddr_storage))
-
-struct in_pktinfo {
-	int		ipi_ifindex;
-	struct in_addr	ipi_spec_dst;
-	struct in_addr	ipi_addr;
-};
-
-/* Structure describing an Internet (IP) socket address. */
-#define __SOCK_SIZE__	16		/* sizeof(struct sockaddr)	*/
-struct sockaddr_in {
-  __kernel_sa_family_t	sin_family;	/* Address family		*/
-  __be16		sin_port;	/* Port number			*/
-  struct in_addr	sin_addr;	/* Internet address		*/
-
-  /* Pad to size of `struct sockaddr'. */
-  unsigned char		__pad[__SOCK_SIZE__ - sizeof(short int) -
-			sizeof(unsigned short int) - sizeof(struct in_addr)];
-};
-#define sin_zero	__pad		/* for BSD UNIX comp. -FvK	*/
-
-
-/*
- * Definitions of the bits in an Internet address integer.
- * On subnets, host and network parts are found according
- * to the subnet mask, not these masks.
- */
-#define	IN_CLASSA(a)		((((long int) (a)) & 0x80000000) == 0)
-#define	IN_CLASSA_NET		0xff000000
-#define	IN_CLASSA_NSHIFT	24
-#define	IN_CLASSA_HOST		(0xffffffff & ~IN_CLASSA_NET)
-#define	IN_CLASSA_MAX		128
-
-#define	IN_CLASSB(a)		((((long int) (a)) & 0xc0000000) == 0x80000000)
-#define	IN_CLASSB_NET		0xffff0000
-#define	IN_CLASSB_NSHIFT	16
-#define	IN_CLASSB_HOST		(0xffffffff & ~IN_CLASSB_NET)
-#define	IN_CLASSB_MAX		65536
-
-#define	IN_CLASSC(a)		((((long int) (a)) & 0xe0000000) == 0xc0000000)
-#define	IN_CLASSC_NET		0xffffff00
-#define	IN_CLASSC_NSHIFT	8
-#define	IN_CLASSC_HOST		(0xffffffff & ~IN_CLASSC_NET)
-
-#define	IN_CLASSD(a)		((((long int) (a)) & 0xf0000000) == 0xe0000000)
-#define	IN_MULTICAST(a)		IN_CLASSD(a)
-#define IN_MULTICAST_NET	0xF0000000
-
-#define	IN_EXPERIMENTAL(a)	((((long int) (a)) & 0xf0000000) == 0xf0000000)
-#define	IN_BADCLASS(a)		IN_EXPERIMENTAL((a))
-
-/* Address to accept any incoming messages. */
-#define	INADDR_ANY		((unsigned long int) 0x00000000)
-
-/* Address to send to all hosts. */
-#define	INADDR_BROADCAST	((unsigned long int) 0xffffffff)
-
-/* Address indicating an error return. */
-#define	INADDR_NONE		((unsigned long int) 0xffffffff)
-
-/* Network number for local host loopback. */
-#define	IN_LOOPBACKNET		127
-
-/* Address to loopback in software to local host.  */
-#define	INADDR_LOOPBACK		0x7f000001	/* 127.0.0.1   */
-#define	IN_LOOPBACK(a)		((((long int) (a)) & 0xff000000) == 0x7f000000)
-
-/* Defines for Multicast INADDR */
-#define INADDR_UNSPEC_GROUP   	0xe0000000U	/* 224.0.0.0   */
-#define INADDR_ALLHOSTS_GROUP 	0xe0000001U	/* 224.0.0.1   */
-#define INADDR_ALLRTRS_GROUP    0xe0000002U	/* 224.0.0.2 */
-#define INADDR_MAX_LOCAL_GROUP  0xe00000ffU	/* 224.0.0.255 */
-
-
-/* <asm/byteorder.h> contains the htonl type stuff.. */
-#include <asm/byteorder.h> 
-
-#ifdef __KERNEL__
-
-#include <linux/errno.h>
-
-static inline int proto_ports_offset(int proto)
-{
-	switch (proto) {
-	case IPPROTO_TCP:
-	case IPPROTO_UDP:
-	case IPPROTO_DCCP:
-	case IPPROTO_ESP:	/* SPI */
-	case IPPROTO_SCTP:
-	case IPPROTO_UDPLITE:
-		return 0;
-	case IPPROTO_AH:	/* SPI */
-		return 4;
-	default:
-		return -EINVAL;
-	}
-}
-
-static inline bool ipv4_is_loopback(__be32 addr)
-{
-	return (addr & htonl(0xff000000)) == htonl(0x7f000000);
-}
-
-static inline bool ipv4_is_multicast(__be32 addr)
-{
-	return (addr & htonl(0xf0000000)) == htonl(0xe0000000);
-}
-
-static inline bool ipv4_is_local_multicast(__be32 addr)
-{
-	return (addr & htonl(0xffffff00)) == htonl(0xe0000000);
-}
-
-static inline bool ipv4_is_lbcast(__be32 addr)
-{
-	/* limited broadcast */
-	return addr == htonl(INADDR_BROADCAST);
-}
-
-static inline bool ipv4_is_zeronet(__be32 addr)
-{
-	return (addr & htonl(0xff000000)) == htonl(0x00000000);
-}
-
-/* Special-Use IPv4 Addresses (RFC3330) */
-
-static inline bool ipv4_is_private_10(__be32 addr)
-{
-	return (addr & htonl(0xff000000)) == htonl(0x0a000000);
-}
-
-static inline bool ipv4_is_private_172(__be32 addr)
-{
-	return (addr & htonl(0xfff00000)) == htonl(0xac100000);
-}
-
-static inline bool ipv4_is_private_192(__be32 addr)
-{
-	return (addr & htonl(0xffff0000)) == htonl(0xc0a80000);
-}
-
-static inline bool ipv4_is_linklocal_169(__be32 addr)
-{
-	return (addr & htonl(0xffff0000)) == htonl(0xa9fe0000);
-}
-
-static inline bool ipv4_is_anycast_6to4(__be32 addr)
-{
-	return (addr & htonl(0xffffff00)) == htonl(0xc0586300);
-}
-
-static inline bool ipv4_is_test_192(__be32 addr)
-{
-	return (addr & htonl(0xffffff00)) == htonl(0xc0000200);
-}
-
-static inline bool ipv4_is_test_198(__be32 addr)
-{
-	return (addr & htonl(0xfffe0000)) == htonl(0xc6120000);
-}
-#endif
-
-#endif	/* _LINUX_IN_H */
diff --git a/ANDROID_3.4.5/include/linux/in6.h b/ANDROID_3.4.5/include/linux/in6.h
deleted file mode 100644
index 5c83d9e3..00000000
--- a/ANDROID_3.4.5/include/linux/in6.h
+++ /dev/null
@@ -1,291 +0,0 @@
-/*
- *	Types and definitions for AF_INET6 
- *	Linux INET6 implementation 
- *
- *	Authors:
- *	Pedro Roque		<roque@di.fc.ul.pt>	
- *
- *	Sources:
- *	IPv6 Program Interfaces for BSD Systems
- *      <draft-ietf-ipngwg-bsd-api-05.txt>
- *
- *	Advanced Sockets API for IPv6
- *	<draft-stevens-advanced-api-00.txt>
- *
- *	This program is free software; you can redistribute it and/or
- *      modify it under the terms of the GNU General Public License
- *      as published by the Free Software Foundation; either version
- *      2 of the License, or (at your option) any later version.
- */
-
-#ifndef _LINUX_IN6_H
-#define _LINUX_IN6_H
-
-#include <linux/types.h>
-
-/*
- *	IPv6 address structure
- */
-
-struct in6_addr {
-	union {
-		__u8		u6_addr8[16];
-		__be16		u6_addr16[8];
-		__be32		u6_addr32[4];
-	} in6_u;
-#define s6_addr			in6_u.u6_addr8
-#define s6_addr16		in6_u.u6_addr16
-#define s6_addr32		in6_u.u6_addr32
-};
-
-/* IPv6 Wildcard Address (::) and Loopback Address (::1) defined in RFC2553
- * NOTE: Be aware the IN6ADDR_* constants and in6addr_* externals are defined
- * in network byte order, not in host byte order as are the IPv4 equivalents
- */
-#ifdef __KERNEL__
-extern const struct in6_addr in6addr_any;
-#define IN6ADDR_ANY_INIT { { { 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 } } }
-extern const struct in6_addr in6addr_loopback;
-#define IN6ADDR_LOOPBACK_INIT { { { 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1 } } }
-extern const struct in6_addr in6addr_linklocal_allnodes;
-#define IN6ADDR_LINKLOCAL_ALLNODES_INIT	\
-		{ { { 0xff,2,0,0,0,0,0,0,0,0,0,0,0,0,0,1 } } }
-extern const struct in6_addr in6addr_linklocal_allrouters;
-#define IN6ADDR_LINKLOCAL_ALLROUTERS_INIT \
-		{ { { 0xff,2,0,0,0,0,0,0,0,0,0,0,0,0,0,2 } } }
-#endif
-
-struct sockaddr_in6 {
-	unsigned short int	sin6_family;    /* AF_INET6 */
-	__be16			sin6_port;      /* Transport layer port # */
-	__be32			sin6_flowinfo;  /* IPv6 flow information */
-	struct in6_addr		sin6_addr;      /* IPv6 address */
-	__u32			sin6_scope_id;  /* scope id (new in RFC2553) */
-};
-
-struct ipv6_mreq {
-	/* IPv6 multicast address of group */
-	struct in6_addr ipv6mr_multiaddr;
-
-	/* local IPv6 address of interface */
-	int		ipv6mr_ifindex;
-};
-
-#define ipv6mr_acaddr	ipv6mr_multiaddr
-
-struct in6_flowlabel_req {
-	struct in6_addr	flr_dst;
-	__be32	flr_label;
-	__u8	flr_action;
-	__u8	flr_share;
-	__u16	flr_flags;
-	__u16 	flr_expires;
-	__u16	flr_linger;
-	__u32	__flr_pad;
-	/* Options in format of IPV6_PKTOPTIONS */
-};
-
-#define IPV6_FL_A_GET	0
-#define IPV6_FL_A_PUT	1
-#define IPV6_FL_A_RENEW	2
-
-#define IPV6_FL_F_CREATE	1
-#define IPV6_FL_F_EXCL		2
-
-#define IPV6_FL_S_NONE		0
-#define IPV6_FL_S_EXCL		1
-#define IPV6_FL_S_PROCESS	2
-#define IPV6_FL_S_USER		3
-#define IPV6_FL_S_ANY		255
-
-
-/*
- *	Bitmask constant declarations to help applications select out the 
- *	flow label and priority fields.
- *
- *	Note that this are in host byte order while the flowinfo field of
- *	sockaddr_in6 is in network byte order.
- */
-
-#define IPV6_FLOWINFO_FLOWLABEL		0x000fffff
-#define IPV6_FLOWINFO_PRIORITY		0x0ff00000
-
-/* These definitions are obsolete */
-#define IPV6_PRIORITY_UNCHARACTERIZED	0x0000
-#define IPV6_PRIORITY_FILLER		0x0100
-#define IPV6_PRIORITY_UNATTENDED	0x0200
-#define IPV6_PRIORITY_RESERVED1		0x0300
-#define IPV6_PRIORITY_BULK		0x0400
-#define IPV6_PRIORITY_RESERVED2		0x0500
-#define IPV6_PRIORITY_INTERACTIVE	0x0600
-#define IPV6_PRIORITY_CONTROL		0x0700
-#define IPV6_PRIORITY_8			0x0800
-#define IPV6_PRIORITY_9			0x0900
-#define IPV6_PRIORITY_10		0x0a00
-#define IPV6_PRIORITY_11		0x0b00
-#define IPV6_PRIORITY_12		0x0c00
-#define IPV6_PRIORITY_13		0x0d00
-#define IPV6_PRIORITY_14		0x0e00
-#define IPV6_PRIORITY_15		0x0f00
-
-/*
- *	IPV6 extension headers
- */
-#define IPPROTO_HOPOPTS		0	/* IPv6 hop-by-hop options	*/
-#define IPPROTO_ROUTING		43	/* IPv6 routing header		*/
-#define IPPROTO_FRAGMENT	44	/* IPv6 fragmentation header	*/
-#define IPPROTO_ICMPV6		58	/* ICMPv6			*/
-#define IPPROTO_NONE		59	/* IPv6 no next header		*/
-#define IPPROTO_DSTOPTS		60	/* IPv6 destination options	*/
-#define IPPROTO_MH		135	/* IPv6 mobility header		*/
-
-/*
- *	IPv6 TLV options.
- */
-#define IPV6_TLV_PAD0		0
-#define IPV6_TLV_PADN		1
-#define IPV6_TLV_ROUTERALERT	5
-#define IPV6_TLV_JUMBO		194
-#define IPV6_TLV_HAO		201	/* home address option */
-
-/*
- *	IPV6 socket options
- */
-
-#define IPV6_ADDRFORM		1
-#define IPV6_2292PKTINFO	2
-#define IPV6_2292HOPOPTS	3
-#define IPV6_2292DSTOPTS	4
-#define IPV6_2292RTHDR		5
-#define IPV6_2292PKTOPTIONS	6
-#define IPV6_CHECKSUM		7
-#define IPV6_2292HOPLIMIT	8
-#define IPV6_NEXTHOP		9
-#define IPV6_AUTHHDR		10	/* obsolete */
-#define IPV6_FLOWINFO		11
-
-#define IPV6_UNICAST_HOPS	16
-#define IPV6_MULTICAST_IF	17
-#define IPV6_MULTICAST_HOPS	18
-#define IPV6_MULTICAST_LOOP	19
-#define IPV6_ADD_MEMBERSHIP	20
-#define IPV6_DROP_MEMBERSHIP	21
-#define IPV6_ROUTER_ALERT	22
-#define IPV6_MTU_DISCOVER	23
-#define IPV6_MTU		24
-#define IPV6_RECVERR		25
-#define IPV6_V6ONLY		26
-#define IPV6_JOIN_ANYCAST	27
-#define IPV6_LEAVE_ANYCAST	28
-
-/* IPV6_MTU_DISCOVER values */
-#define IPV6_PMTUDISC_DONT		0
-#define IPV6_PMTUDISC_WANT		1
-#define IPV6_PMTUDISC_DO		2
-#define IPV6_PMTUDISC_PROBE		3
-
-/* Flowlabel */
-#define IPV6_FLOWLABEL_MGR	32
-#define IPV6_FLOWINFO_SEND	33
-
-#define IPV6_IPSEC_POLICY	34
-#define IPV6_XFRM_POLICY	35
-
-/*
- * Multicast:
- * Following socket options are shared between IPv4 and IPv6.
- *
- * MCAST_JOIN_GROUP		42
- * MCAST_BLOCK_SOURCE		43
- * MCAST_UNBLOCK_SOURCE		44
- * MCAST_LEAVE_GROUP		45
- * MCAST_JOIN_SOURCE_GROUP	46
- * MCAST_LEAVE_SOURCE_GROUP	47
- * MCAST_MSFILTER		48
- */
-
-/*
- * Advanced API (RFC3542) (1)
- *
- * Note: IPV6_RECVRTHDRDSTOPTS does not exist. see net/ipv6/datagram.c.
- */
-
-#define IPV6_RECVPKTINFO	49
-#define IPV6_PKTINFO		50
-#define IPV6_RECVHOPLIMIT	51
-#define IPV6_HOPLIMIT		52
-#define IPV6_RECVHOPOPTS	53
-#define IPV6_HOPOPTS		54
-#define IPV6_RTHDRDSTOPTS	55
-#define IPV6_RECVRTHDR		56
-#define IPV6_RTHDR		57
-#define IPV6_RECVDSTOPTS	58
-#define IPV6_DSTOPTS		59
-#define IPV6_RECVPATHMTU	60
-#define IPV6_PATHMTU		61
-#define IPV6_DONTFRAG		62
-#if 0	/* not yet */
-#define IPV6_USE_MIN_MTU	63
-#endif
-
-/*
- * Netfilter (1)
- *
- * Following socket options are used in ip6_tables;
- * see include/linux/netfilter_ipv6/ip6_tables.h.
- *
- * IP6T_SO_SET_REPLACE / IP6T_SO_GET_INFO		64
- * IP6T_SO_SET_ADD_COUNTERS / IP6T_SO_GET_ENTRIES	65
- */
-
-/*
- * Advanced API (RFC3542) (2)
- */
-#define IPV6_RECVTCLASS		66
-#define IPV6_TCLASS		67
-
-/*
- * Netfilter (2)
- *
- * Following socket options are used in ip6_tables;
- * see include/linux/netfilter_ipv6/ip6_tables.h.
- *
- * IP6T_SO_GET_REVISION_MATCH	68
- * IP6T_SO_GET_REVISION_TARGET	69
- */
-
-/* RFC5014: Source address selection */
-#define IPV6_ADDR_PREFERENCES	72
-
-#define IPV6_PREFER_SRC_TMP		0x0001
-#define IPV6_PREFER_SRC_PUBLIC		0x0002
-#define IPV6_PREFER_SRC_PUBTMP_DEFAULT	0x0100
-#define IPV6_PREFER_SRC_COA		0x0004
-#define IPV6_PREFER_SRC_HOME		0x0400
-#define IPV6_PREFER_SRC_CGA		0x0008
-#define IPV6_PREFER_SRC_NONCGA		0x0800
-
-/* RFC5082: Generalized Ttl Security Mechanism */
-#define IPV6_MINHOPCOUNT		73
-
-#define IPV6_ORIGDSTADDR        74
-#define IPV6_RECVORIGDSTADDR    IPV6_ORIGDSTADDR
-#define IPV6_TRANSPARENT        75
-#define IPV6_UNICAST_IF         76
-
-/*
- * Multicast Routing:
- * see include/linux/mroute6.h.
- *
- * MRT6_INIT			200
- * MRT6_DONE			201
- * MRT6_ADD_MIF			202
- * MRT6_DEL_MIF			203
- * MRT6_ADD_MFC			204
- * MRT6_DEL_MFC			205
- * MRT6_VERSION			206
- * MRT6_ASSERT			207
- * MRT6_PIM			208
- * (reserved)			209
- */
-#endif
diff --git a/ANDROID_3.4.5/include/linux/in_route.h b/ANDROID_3.4.5/include/linux/in_route.h
deleted file mode 100644
index b261b8c9..00000000
--- a/ANDROID_3.4.5/include/linux/in_route.h
+++ /dev/null
@@ -1,32 +0,0 @@
-#ifndef _LINUX_IN_ROUTE_H
-#define _LINUX_IN_ROUTE_H
-
-/* IPv4 routing cache flags */
-
-#define RTCF_DEAD	RTNH_F_DEAD
-#define RTCF_ONLINK	RTNH_F_ONLINK
-
-/* Obsolete flag. About to be deleted */
-#define RTCF_NOPMTUDISC RTM_F_NOPMTUDISC
-
-#define RTCF_NOTIFY	0x00010000
-#define RTCF_DIRECTDST	0x00020000 /* unused */
-#define RTCF_REDIRECTED	0x00040000
-#define RTCF_TPROXY	0x00080000 /* unused */
-
-#define RTCF_FAST	0x00200000 /* unused */
-#define RTCF_MASQ	0x00400000 /* unused */
-#define RTCF_SNAT	0x00800000 /* unused */
-#define RTCF_DOREDIRECT 0x01000000
-#define RTCF_DIRECTSRC	0x04000000
-#define RTCF_DNAT	0x08000000
-#define RTCF_BROADCAST	0x10000000
-#define RTCF_MULTICAST	0x20000000
-#define RTCF_REJECT	0x40000000 /* unused */
-#define RTCF_LOCAL	0x80000000
-
-#define RTCF_NAT	(RTCF_DNAT|RTCF_SNAT)
-
-#define RT_TOS(tos)	((tos)&IPTOS_TOS_MASK)
-
-#endif /* _LINUX_IN_ROUTE_H */
diff --git a/ANDROID_3.4.5/include/linux/inet.h b/ANDROID_3.4.5/include/linux/inet.h
deleted file mode 100644
index 4cca05c9..00000000
--- a/ANDROID_3.4.5/include/linux/inet.h
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- *		Swansea University Computer Society NET3
- *
- *	This work is derived from NET2Debugged, which is in turn derived
- *	from NET2D which was written by:
- * 		Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
- *
- *		This work was derived from Ross Biro's inspirational work
- *		for the LINUX operating system.  His version numbers were:
- *
- *		$Id: Space.c,v     0.8.4.5  1992/12/12 19:25:04 bir7 Exp $
- *		$Id: arp.c,v       0.8.4.6  1993/01/28 22:30:00 bir7 Exp $
- *		$Id: arp.h,v       0.8.4.6  1993/01/28 22:30:00 bir7 Exp $
- *		$Id: dev.c,v       0.8.4.13 1993/01/23 18:00:11 bir7 Exp $
- *		$Id: dev.h,v       0.8.4.7  1993/01/23 18:00:11 bir7 Exp $
- *		$Id: eth.c,v       0.8.4.4  1993/01/22 23:21:38 bir7 Exp $
- *		$Id: eth.h,v       0.8.4.1  1992/11/10 00:17:18 bir7 Exp $
- *		$Id: icmp.c,v      0.8.4.9  1993/01/23 18:00:11 bir7 Exp $
- *		$Id: icmp.h,v      0.8.4.2  1992/11/15 14:55:30 bir7 Exp $
- * 		$Id: ip.c,v        0.8.4.8  1992/12/12 19:25:04 bir7 Exp $
- * 		$Id: ip.h,v        0.8.4.2  1993/01/23 18:00:11 bir7 Exp $
- * 		$Id: loopback.c,v  0.8.4.8  1993/01/23 18:00:11 bir7 Exp $
- * 		$Id: packet.c,v    0.8.4.7  1993/01/26 22:04:00 bir7 Exp $
- *		$Id: protocols.c,v 0.8.4.3  1992/11/15 14:55:30 bir7 Exp $
- *		$Id: raw.c,v       0.8.4.12 1993/01/26 22:04:00 bir7 Exp $
- *		$Id: sock.c,v      0.8.4.6  1993/01/28 22:30:00 bir7 Exp $
- *		$Id: sock.h,v      0.8.4.7  1993/01/26 22:04:00 bir7 Exp $
- *		$Id: tcp.c,v       0.8.4.16 1993/01/26 22:04:00 bir7 Exp $
- *		$Id: tcp.h,v       0.8.4.7  1993/01/22 22:58:08 bir7 Exp $
- *		$Id: timer.c,v     0.8.4.8  1993/01/23 18:00:11 bir7 Exp $
- *		$Id: timer.h,v     0.8.4.2  1993/01/23 18:00:11 bir7 Exp $
- *		$Id: udp.c,v       0.8.4.12 1993/01/26 22:04:00 bir7 Exp $
- *		$Id: udp.h,v       0.8.4.1  1992/11/10 00:17:18 bir7 Exp $
- *		$Id: we.c,v        0.8.4.10 1993/01/23 18:00:11 bir7 Exp $
- *		$Id: wereg.h,v     0.8.4.1  1992/11/10 00:17:18 bir7 Exp $
- *
- *		This program is free software; you can redistribute it and/or
- *		modify it under the terms of the GNU General Public License
- *		as published by the Free Software Foundation; either version
- *		2 of the License, or (at your option) any later version.
- */
-#ifndef _LINUX_INET_H
-#define _LINUX_INET_H
-
-#include <linux/types.h>
-
-/*
- * These mimic similar macros defined in user-space for inet_ntop(3).
- * See /usr/include/netinet/in.h .
- */
-#define INET_ADDRSTRLEN		(16)
-#define INET6_ADDRSTRLEN	(48)
-
-extern __be32 in_aton(const char *str);
-extern int in4_pton(const char *src, int srclen, u8 *dst, int delim, const char **end);
-extern int in6_pton(const char *src, int srclen, u8 *dst, int delim, const char **end);
-#endif	/* _LINUX_INET_H */
diff --git a/ANDROID_3.4.5/include/linux/inet_diag.h b/ANDROID_3.4.5/include/linux/inet_diag.h
deleted file mode 100644
index f1362b54..00000000
--- a/ANDROID_3.4.5/include/linux/inet_diag.h
+++ /dev/null
@@ -1,177 +0,0 @@
-#ifndef _INET_DIAG_H_
-#define _INET_DIAG_H_ 1
-
-#include <linux/types.h>
-
-/* Just some random number */
-#define TCPDIAG_GETSOCK 18
-#define DCCPDIAG_GETSOCK 19
-
-#define INET_DIAG_GETSOCK_MAX 24
-
-/* Socket identity */
-struct inet_diag_sockid {
-	__be16	idiag_sport;
-	__be16	idiag_dport;
-	__be32	idiag_src[4];
-	__be32	idiag_dst[4];
-	__u32	idiag_if;
-	__u32	idiag_cookie[2];
-#define INET_DIAG_NOCOOKIE (~0U)
-};
-
-/* Request structure */
-
-struct inet_diag_req {
-	__u8	idiag_family;		/* Family of addresses. */
-	__u8	idiag_src_len;
-	__u8	idiag_dst_len;
-	__u8	idiag_ext;		/* Query extended information */
-
-	struct inet_diag_sockid id;
-
-	__u32	idiag_states;		/* States to dump */
-	__u32	idiag_dbs;		/* Tables to dump (NI) */
-};
-
-struct inet_diag_req_v2 {
-	__u8	sdiag_family;
-	__u8	sdiag_protocol;
-	__u8	idiag_ext;
-	__u8	pad;
-	__u32	idiag_states;
-	struct inet_diag_sockid id;
-};
-
-enum {
-	INET_DIAG_REQ_NONE,
-	INET_DIAG_REQ_BYTECODE,
-};
-
-#define INET_DIAG_REQ_MAX INET_DIAG_REQ_BYTECODE
-
-/* Bytecode is sequence of 4 byte commands followed by variable arguments.
- * All the commands identified by "code" are conditional jumps forward:
- * to offset cc+"yes" or to offset cc+"no". "yes" is supposed to be
- * length of the command and its arguments.
- */
- 
-struct inet_diag_bc_op {
-	unsigned char	code;
-	unsigned char	yes;
-	unsigned short	no;
-};
-
-enum {
-	INET_DIAG_BC_NOP,
-	INET_DIAG_BC_JMP,
-	INET_DIAG_BC_S_GE,
-	INET_DIAG_BC_S_LE,
-	INET_DIAG_BC_D_GE,
-	INET_DIAG_BC_D_LE,
-	INET_DIAG_BC_AUTO,
-	INET_DIAG_BC_S_COND,
-	INET_DIAG_BC_D_COND,
-};
-
-struct inet_diag_hostcond {
-	__u8	family;
-	__u8	prefix_len;
-	int	port;
-	__be32	addr[0];
-};
-
-/* Base info structure. It contains socket identity (addrs/ports/cookie)
- * and, alas, the information shown by netstat. */
-struct inet_diag_msg {
-	__u8	idiag_family;
-	__u8	idiag_state;
-	__u8	idiag_timer;
-	__u8	idiag_retrans;
-
-	struct inet_diag_sockid id;
-
-	__u32	idiag_expires;
-	__u32	idiag_rqueue;
-	__u32	idiag_wqueue;
-	__u32	idiag_uid;
-	__u32	idiag_inode;
-};
-
-/* Extensions */
-
-enum {
-	INET_DIAG_NONE,
-	INET_DIAG_MEMINFO,
-	INET_DIAG_INFO,
-	INET_DIAG_VEGASINFO,
-	INET_DIAG_CONG,
-	INET_DIAG_TOS,
-	INET_DIAG_TCLASS,
-	INET_DIAG_SKMEMINFO,
-};
-
-#define INET_DIAG_MAX INET_DIAG_SKMEMINFO
-
-
-/* INET_DIAG_MEM */
-
-struct inet_diag_meminfo {
-	__u32	idiag_rmem;
-	__u32	idiag_wmem;
-	__u32	idiag_fmem;
-	__u32	idiag_tmem;
-};
-
-/* INET_DIAG_VEGASINFO */
-
-struct tcpvegas_info {
-	__u32	tcpv_enabled;
-	__u32	tcpv_rttcnt;
-	__u32	tcpv_rtt;
-	__u32	tcpv_minrtt;
-};
-
-#ifdef __KERNEL__
-struct sock;
-struct inet_hashinfo;
-struct nlattr;
-struct nlmsghdr;
-struct sk_buff;
-struct netlink_callback;
-
-struct inet_diag_handler {
-	void			(*dump)(struct sk_buff *skb,
-					struct netlink_callback *cb,
-					struct inet_diag_req_v2 *r,
-					struct nlattr *bc);
-
-	int			(*dump_one)(struct sk_buff *in_skb,
-					const struct nlmsghdr *nlh,
-					struct inet_diag_req_v2 *req);
-
-	void			(*idiag_get_info)(struct sock *sk,
-						  struct inet_diag_msg *r,
-						  void *info);
-	__u16                   idiag_type;
-};
-
-struct inet_connection_sock;
-int inet_sk_diag_fill(struct sock *sk, struct inet_connection_sock *icsk,
-			      struct sk_buff *skb, struct inet_diag_req_v2 *req,
-			      u32 pid, u32 seq, u16 nlmsg_flags,
-			      const struct nlmsghdr *unlh);
-void inet_diag_dump_icsk(struct inet_hashinfo *h, struct sk_buff *skb,
-		struct netlink_callback *cb, struct inet_diag_req_v2 *r,
-		struct nlattr *bc);
-int inet_diag_dump_one_icsk(struct inet_hashinfo *hashinfo,
-		struct sk_buff *in_skb, const struct nlmsghdr *nlh,
-		struct inet_diag_req_v2 *req);
-
-int inet_diag_bc_sk(const struct nlattr *_bc, struct sock *sk);
-
-extern int  inet_diag_register(const struct inet_diag_handler *handler);
-extern void inet_diag_unregister(const struct inet_diag_handler *handler);
-#endif /* __KERNEL__ */
-
-#endif /* _INET_DIAG_H_ */
diff --git a/ANDROID_3.4.5/include/linux/inet_lro.h b/ANDROID_3.4.5/include/linux/inet_lro.h
deleted file mode 100644
index 2cf55afb..00000000
--- a/ANDROID_3.4.5/include/linux/inet_lro.h
+++ /dev/null
@@ -1,165 +0,0 @@
-/*
- *  linux/include/linux/inet_lro.h
- *
- *  Large Receive Offload (ipv4 / tcp)
- *
- *  (C) Copyright IBM Corp. 2007
- *
- *  Authors:
- *       Jan-Bernd Themann <themann@de.ibm.com>
- *       Christoph Raisch <raisch@de.ibm.com>
- *
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __INET_LRO_H_
-#define __INET_LRO_H_
-
-#include <net/ip.h>
-#include <net/tcp.h>
-
-/*
- * LRO statistics
- */
-
-struct net_lro_stats {
-	unsigned long aggregated;
-	unsigned long flushed;
-	unsigned long no_desc;
-};
-
-/*
- * LRO descriptor for a tcp session
- */
-struct net_lro_desc {
-	struct sk_buff *parent;
-	struct sk_buff *last_skb;
-	struct skb_frag_struct *next_frag;
-	struct iphdr *iph;
-	struct tcphdr *tcph;
-	__wsum  data_csum;
-	__be32 tcp_rcv_tsecr;
-	__be32 tcp_rcv_tsval;
-	__be32 tcp_ack;
-	u32 tcp_next_seq;
-	u32 skb_tot_frags_len;
-	u16 ip_tot_len;
-	u16 tcp_saw_tstamp; 		/* timestamps enabled */
-	__be16 tcp_window;
-	int pkt_aggr_cnt;		/* counts aggregated packets */
-	int vlan_packet;
-	int mss;
-	int active;
-};
-
-/*
- * Large Receive Offload (LRO) Manager
- *
- * Fields must be set by driver
- */
-
-struct net_lro_mgr {
-	struct net_device *dev;
-	struct net_lro_stats stats;
-
-	/* LRO features */
-	unsigned long features;
-#define LRO_F_NAPI            1  /* Pass packets to stack via NAPI */
-#define LRO_F_EXTRACT_VLAN_ID 2  /* Set flag if VLAN IDs are extracted
-				    from received packets and eth protocol
-				    is still ETH_P_8021Q */
-
-	/*
-	 * Set for generated SKBs that are not added to
-	 * the frag list in fragmented mode
-	 */
-	u32 ip_summed;
-	u32 ip_summed_aggr; /* Set in aggregated SKBs: CHECKSUM_UNNECESSARY
-			     * or CHECKSUM_NONE */
-
-	int max_desc; /* Max number of LRO descriptors  */
-	int max_aggr; /* Max number of LRO packets to be aggregated */
-
-	int frag_align_pad; /* Padding required to properly align layer 3
-			     * headers in generated skb when using frags */
-
-	struct net_lro_desc *lro_arr; /* Array of LRO descriptors */
-
-	/*
-	 * Optimized driver functions
-	 *
-	 * get_skb_header: returns tcp and ip header for packet in SKB
-	 */
-	int (*get_skb_header)(struct sk_buff *skb, void **ip_hdr,
-			      void **tcpudp_hdr, u64 *hdr_flags, void *priv);
-
-	/* hdr_flags: */
-#define LRO_IPV4 1 /* ip_hdr is IPv4 header */
-#define LRO_TCP  2 /* tcpudp_hdr is TCP header */
-
-	/*
-	 * get_frag_header: returns mac, tcp and ip header for packet in SKB
-	 *
-	 * @hdr_flags: Indicate what kind of LRO has to be done
-	 *             (IPv4/IPv6/TCP/UDP)
-	 */
-	int (*get_frag_header)(struct skb_frag_struct *frag, void **mac_hdr,
-			       void **ip_hdr, void **tcpudp_hdr, u64 *hdr_flags,
-			       void *priv);
-};
-
-/*
- * Processes a SKB
- *
- * @lro_mgr: LRO manager to use
- * @skb: SKB to aggregate
- * @priv: Private data that may be used by driver functions
- *        (for example get_tcp_ip_hdr)
- */
-
-void lro_receive_skb(struct net_lro_mgr *lro_mgr,
-		     struct sk_buff *skb,
-		     void *priv);
-
-/*
- * Processes a fragment list
- *
- * This functions aggregate fragments and generate SKBs do pass
- * the packets to the stack.
- *
- * @lro_mgr: LRO manager to use
- * @frags: Fragment to be processed. Must contain entire header in first
- *         element.
- * @len: Length of received data
- * @true_size: Actual size of memory the fragment is consuming
- * @priv: Private data that may be used by driver functions
- *        (for example get_tcp_ip_hdr)
- */
-
-void lro_receive_frags(struct net_lro_mgr *lro_mgr,
-		       struct skb_frag_struct *frags,
-		       int len, int true_size, void *priv, __wsum sum);
-
-/*
- * Forward all aggregated SKBs held by lro_mgr to network stack
- */
-
-void lro_flush_all(struct net_lro_mgr *lro_mgr);
-
-void lro_flush_pkt(struct net_lro_mgr *lro_mgr,
-		   struct iphdr *iph, struct tcphdr *tcph);
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/inetdevice.h b/ANDROID_3.4.5/include/linux/inetdevice.h
deleted file mode 100644
index 597f4a9f..00000000
--- a/ANDROID_3.4.5/include/linux/inetdevice.h
+++ /dev/null
@@ -1,259 +0,0 @@
-#ifndef _LINUX_INETDEVICE_H
-#define _LINUX_INETDEVICE_H
-
-#ifdef __KERNEL__
-
-#include <linux/bitmap.h>
-#include <linux/if.h>
-#include <linux/netdevice.h>
-#include <linux/rcupdate.h>
-#include <linux/timer.h>
-#include <linux/sysctl.h>
-#include <linux/rtnetlink.h>
-
-enum
-{
-	IPV4_DEVCONF_FORWARDING=1,
-	IPV4_DEVCONF_MC_FORWARDING,
-	IPV4_DEVCONF_PROXY_ARP,
-	IPV4_DEVCONF_ACCEPT_REDIRECTS,
-	IPV4_DEVCONF_SECURE_REDIRECTS,
-	IPV4_DEVCONF_SEND_REDIRECTS,
-	IPV4_DEVCONF_SHARED_MEDIA,
-	IPV4_DEVCONF_RP_FILTER,
-	IPV4_DEVCONF_ACCEPT_SOURCE_ROUTE,
-	IPV4_DEVCONF_BOOTP_RELAY,
-	IPV4_DEVCONF_LOG_MARTIANS,
-	IPV4_DEVCONF_TAG,
-	IPV4_DEVCONF_ARPFILTER,
-	IPV4_DEVCONF_MEDIUM_ID,
-	IPV4_DEVCONF_NOXFRM,
-	IPV4_DEVCONF_NOPOLICY,
-	IPV4_DEVCONF_FORCE_IGMP_VERSION,
-	IPV4_DEVCONF_ARP_ANNOUNCE,
-	IPV4_DEVCONF_ARP_IGNORE,
-	IPV4_DEVCONF_PROMOTE_SECONDARIES,
-	IPV4_DEVCONF_ARP_ACCEPT,
-	IPV4_DEVCONF_ARP_NOTIFY,
-	IPV4_DEVCONF_ACCEPT_LOCAL,
-	IPV4_DEVCONF_SRC_VMARK,
-	IPV4_DEVCONF_PROXY_ARP_PVLAN,
-	__IPV4_DEVCONF_MAX
-};
-
-#define IPV4_DEVCONF_MAX (__IPV4_DEVCONF_MAX - 1)
-
-struct ipv4_devconf {
-	void	*sysctl;
-	int	data[IPV4_DEVCONF_MAX];
-	DECLARE_BITMAP(state, IPV4_DEVCONF_MAX);
-};
-
-struct in_device {
-	struct net_device	*dev;
-	atomic_t		refcnt;
-	int			dead;
-	struct in_ifaddr	*ifa_list;	/* IP ifaddr chain		*/
-	struct ip_mc_list __rcu	*mc_list;	/* IP multicast filter chain    */
-	int			mc_count;	/* Number of installed mcasts	*/
-	spinlock_t		mc_tomb_lock;
-	struct ip_mc_list	*mc_tomb;
-	unsigned long		mr_v1_seen;
-	unsigned long		mr_v2_seen;
-	unsigned long		mr_maxdelay;
-	unsigned char		mr_qrv;
-	unsigned char		mr_gq_running;
-	unsigned char		mr_ifc_count;
-	struct timer_list	mr_gq_timer;	/* general query timer */
-	struct timer_list	mr_ifc_timer;	/* interface change timer */
-
-	struct neigh_parms	*arp_parms;
-	struct ipv4_devconf	cnf;
-	struct rcu_head		rcu_head;
-};
-
-#define IPV4_DEVCONF(cnf, attr) ((cnf).data[IPV4_DEVCONF_ ## attr - 1])
-#define IPV4_DEVCONF_ALL(net, attr) \
-	IPV4_DEVCONF((*(net)->ipv4.devconf_all), attr)
-
-static inline int ipv4_devconf_get(struct in_device *in_dev, int index)
-{
-	index--;
-	return in_dev->cnf.data[index];
-}
-
-static inline void ipv4_devconf_set(struct in_device *in_dev, int index,
-				    int val)
-{
-	index--;
-	set_bit(index, in_dev->cnf.state);
-	in_dev->cnf.data[index] = val;
-}
-
-static inline void ipv4_devconf_setall(struct in_device *in_dev)
-{
-	bitmap_fill(in_dev->cnf.state, IPV4_DEVCONF_MAX);
-}
-
-#define IN_DEV_CONF_GET(in_dev, attr) \
-	ipv4_devconf_get((in_dev), IPV4_DEVCONF_ ## attr)
-#define IN_DEV_CONF_SET(in_dev, attr, val) \
-	ipv4_devconf_set((in_dev), IPV4_DEVCONF_ ## attr, (val))
-
-#define IN_DEV_ANDCONF(in_dev, attr) \
-	(IPV4_DEVCONF_ALL(dev_net(in_dev->dev), attr) && \
-	 IN_DEV_CONF_GET((in_dev), attr))
-#define IN_DEV_ORCONF(in_dev, attr) \
-	(IPV4_DEVCONF_ALL(dev_net(in_dev->dev), attr) || \
-	 IN_DEV_CONF_GET((in_dev), attr))
-#define IN_DEV_MAXCONF(in_dev, attr) \
-	(max(IPV4_DEVCONF_ALL(dev_net(in_dev->dev), attr), \
-	     IN_DEV_CONF_GET((in_dev), attr)))
-
-#define IN_DEV_FORWARD(in_dev)		IN_DEV_CONF_GET((in_dev), FORWARDING)
-#define IN_DEV_MFORWARD(in_dev)		IN_DEV_ANDCONF((in_dev), MC_FORWARDING)
-#define IN_DEV_RPFILTER(in_dev)		IN_DEV_MAXCONF((in_dev), RP_FILTER)
-#define IN_DEV_SRC_VMARK(in_dev)    	IN_DEV_ORCONF((in_dev), SRC_VMARK)
-#define IN_DEV_SOURCE_ROUTE(in_dev)	IN_DEV_ANDCONF((in_dev), \
-						       ACCEPT_SOURCE_ROUTE)
-#define IN_DEV_ACCEPT_LOCAL(in_dev)	IN_DEV_ORCONF((in_dev), ACCEPT_LOCAL)
-#define IN_DEV_BOOTP_RELAY(in_dev)	IN_DEV_ANDCONF((in_dev), BOOTP_RELAY)
-
-#define IN_DEV_LOG_MARTIANS(in_dev)	IN_DEV_ORCONF((in_dev), LOG_MARTIANS)
-#define IN_DEV_PROXY_ARP(in_dev)	IN_DEV_ORCONF((in_dev), PROXY_ARP)
-#define IN_DEV_PROXY_ARP_PVLAN(in_dev)	IN_DEV_CONF_GET(in_dev, PROXY_ARP_PVLAN)
-#define IN_DEV_SHARED_MEDIA(in_dev)	IN_DEV_ORCONF((in_dev), SHARED_MEDIA)
-#define IN_DEV_TX_REDIRECTS(in_dev)	IN_DEV_ORCONF((in_dev), SEND_REDIRECTS)
-#define IN_DEV_SEC_REDIRECTS(in_dev)	IN_DEV_ORCONF((in_dev), \
-						      SECURE_REDIRECTS)
-#define IN_DEV_IDTAG(in_dev)		IN_DEV_CONF_GET(in_dev, TAG)
-#define IN_DEV_MEDIUM_ID(in_dev)	IN_DEV_CONF_GET(in_dev, MEDIUM_ID)
-#define IN_DEV_PROMOTE_SECONDARIES(in_dev) \
-					IN_DEV_ORCONF((in_dev), \
-						      PROMOTE_SECONDARIES)
-
-#define IN_DEV_RX_REDIRECTS(in_dev) \
-	((IN_DEV_FORWARD(in_dev) && \
-	  IN_DEV_ANDCONF((in_dev), ACCEPT_REDIRECTS)) \
-	 || (!IN_DEV_FORWARD(in_dev) && \
-	  IN_DEV_ORCONF((in_dev), ACCEPT_REDIRECTS)))
-
-#define IN_DEV_ARPFILTER(in_dev)	IN_DEV_ORCONF((in_dev), ARPFILTER)
-#define IN_DEV_ARP_ACCEPT(in_dev)	IN_DEV_ORCONF((in_dev), ARP_ACCEPT)
-#define IN_DEV_ARP_ANNOUNCE(in_dev)	IN_DEV_MAXCONF((in_dev), ARP_ANNOUNCE)
-#define IN_DEV_ARP_IGNORE(in_dev)	IN_DEV_MAXCONF((in_dev), ARP_IGNORE)
-#define IN_DEV_ARP_NOTIFY(in_dev)	IN_DEV_MAXCONF((in_dev), ARP_NOTIFY)
-
-struct in_ifaddr {
-	struct hlist_node	hash;
-	struct in_ifaddr	*ifa_next;
-	struct in_device	*ifa_dev;
-	struct rcu_head		rcu_head;
-	__be32			ifa_local;
-	__be32			ifa_address;
-	__be32			ifa_mask;
-	__be32			ifa_broadcast;
-	unsigned char		ifa_scope;
-	unsigned char		ifa_flags;
-	unsigned char		ifa_prefixlen;
-	char			ifa_label[IFNAMSIZ];
-};
-
-extern int register_inetaddr_notifier(struct notifier_block *nb);
-extern int unregister_inetaddr_notifier(struct notifier_block *nb);
-
-extern struct net_device *__ip_dev_find(struct net *net, __be32 addr, bool devref);
-static inline struct net_device *ip_dev_find(struct net *net, __be32 addr)
-{
-	return __ip_dev_find(net, addr, true);
-}
-
-extern int		inet_addr_onlink(struct in_device *in_dev, __be32 a, __be32 b);
-extern int		devinet_ioctl(struct net *net, unsigned int cmd, void __user *);
-extern void		devinet_init(void);
-extern struct in_device	*inetdev_by_index(struct net *, int);
-extern __be32		inet_select_addr(const struct net_device *dev, __be32 dst, int scope);
-extern __be32		inet_confirm_addr(struct in_device *in_dev, __be32 dst, __be32 local, int scope);
-extern struct in_ifaddr *inet_ifa_byprefix(struct in_device *in_dev, __be32 prefix, __be32 mask);
-
-static __inline__ int inet_ifa_match(__be32 addr, struct in_ifaddr *ifa)
-{
-	return !((addr^ifa->ifa_address)&ifa->ifa_mask);
-}
-
-/*
- *	Check if a mask is acceptable.
- */
- 
-static __inline__ int bad_mask(__be32 mask, __be32 addr)
-{
-	__u32 hmask;
-	if (addr & (mask = ~mask))
-		return 1;
-	hmask = ntohl(mask);
-	if (hmask & (hmask+1))
-		return 1;
-	return 0;
-}
-
-#define for_primary_ifa(in_dev)	{ struct in_ifaddr *ifa; \
-  for (ifa = (in_dev)->ifa_list; ifa && !(ifa->ifa_flags&IFA_F_SECONDARY); ifa = ifa->ifa_next)
-
-#define for_ifa(in_dev)	{ struct in_ifaddr *ifa; \
-  for (ifa = (in_dev)->ifa_list; ifa; ifa = ifa->ifa_next)
-
-
-#define endfor_ifa(in_dev) }
-
-static inline struct in_device *__in_dev_get_rcu(const struct net_device *dev)
-{
-	return rcu_dereference(dev->ip_ptr);
-}
-
-static inline struct in_device *in_dev_get(const struct net_device *dev)
-{
-	struct in_device *in_dev;
-
-	rcu_read_lock();
-	in_dev = __in_dev_get_rcu(dev);
-	if (in_dev)
-		atomic_inc(&in_dev->refcnt);
-	rcu_read_unlock();
-	return in_dev;
-}
-
-static inline struct in_device *__in_dev_get_rtnl(const struct net_device *dev)
-{
-	return rtnl_dereference(dev->ip_ptr);
-}
-
-extern void in_dev_finish_destroy(struct in_device *idev);
-
-static inline void in_dev_put(struct in_device *idev)
-{
-	if (atomic_dec_and_test(&idev->refcnt))
-		in_dev_finish_destroy(idev);
-}
-
-#define __in_dev_put(idev)  atomic_dec(&(idev)->refcnt)
-#define in_dev_hold(idev)   atomic_inc(&(idev)->refcnt)
-
-#endif /* __KERNEL__ */
-
-static __inline__ __be32 inet_make_mask(int logmask)
-{
-	if (logmask)
-		return htonl(~((1<<(32-logmask))-1));
-	return 0;
-}
-
-static __inline__ int inet_mask_len(__be32 mask)
-{
-	__u32 hmask = ntohl(mask);
-	if (!hmask)
-		return 0;
-	return 32 - ffz(~hmask);
-}
-
-
-#endif /* _LINUX_INETDEVICE_H */
diff --git a/ANDROID_3.4.5/include/linux/init.h b/ANDROID_3.4.5/include/linux/init.h
deleted file mode 100644
index 6b951095..00000000
--- a/ANDROID_3.4.5/include/linux/init.h
+++ /dev/null
@@ -1,350 +0,0 @@
-#ifndef _LINUX_INIT_H
-#define _LINUX_INIT_H
-
-#include <linux/compiler.h>
-#include <linux/types.h>
-
-/* These macros are used to mark some functions or 
- * initialized data (doesn't apply to uninitialized data)
- * as `initialization' functions. The kernel can take this
- * as hint that the function is used only during the initialization
- * phase and free up used memory resources after
- *
- * Usage:
- * For functions:
- * 
- * You should add __init immediately before the function name, like:
- *
- * static void __init initme(int x, int y)
- * {
- *    extern int z; z = x * y;
- * }
- *
- * If the function has a prototype somewhere, you can also add
- * __init between closing brace of the prototype and semicolon:
- *
- * extern int initialize_foobar_device(int, int, int) __init;
- *
- * For initialized data:
- * You should insert __initdata between the variable name and equal
- * sign followed by value, e.g.:
- *
- * static int init_variable __initdata = 0;
- * static const char linux_logo[] __initconst = { 0x32, 0x36, ... };
- *
- * Don't forget to initialize data not at file scope, i.e. within a function,
- * as gcc otherwise puts the data into the bss section and not into the init
- * section.
- * 
- * Also note, that this data cannot be "const".
- */
-
-/* These are for everybody (although not all archs will actually
-   discard it in modules) */
-#define __init		__section(.init.text) __cold notrace
-#define __initdata	__section(.init.data)
-#define __initconst	__section(.init.rodata)
-#define __exitdata	__section(.exit.data)
-#define __exit_call	__used __section(.exitcall.exit)
-
-/*
- * modpost check for section mismatches during the kernel build.
- * A section mismatch happens when there are references from a
- * code or data section to an init section (both code or data).
- * The init sections are (for most archs) discarded by the kernel
- * when early init has completed so all such references are potential bugs.
- * For exit sections the same issue exists.
- *
- * The following markers are used for the cases where the reference to
- * the *init / *exit section (code or data) is valid and will teach
- * modpost not to issue a warning.  Intended semantics is that a code or
- * data tagged __ref* can reference code or data from init section without
- * producing a warning (of course, no warning does not mean code is
- * correct, so optimally document why the __ref is needed and why it's OK).
- *
- * The markers follow same syntax rules as __init / __initdata.
- */
-#define __ref            __section(.ref.text) noinline
-#define __refdata        __section(.ref.data)
-#define __refconst       __section(.ref.rodata)
-
-/* compatibility defines */
-#define __init_refok     __ref
-#define __initdata_refok __refdata
-#define __exit_refok     __ref
-
-
-#ifdef MODULE
-#define __exitused
-#else
-#define __exitused  __used
-#endif
-
-#define __exit          __section(.exit.text) __exitused __cold notrace
-
-/* Used for HOTPLUG */
-#define __devinit        __section(.devinit.text) __cold notrace
-#define __devinitdata    __section(.devinit.data)
-#define __devinitconst   __section(.devinit.rodata)
-#define __devexit        __section(.devexit.text) __exitused __cold notrace
-#define __devexitdata    __section(.devexit.data)
-#define __devexitconst   __section(.devexit.rodata)
-
-/* Used for HOTPLUG_CPU */
-#define __cpuinit        __section(.cpuinit.text) __cold notrace
-#define __cpuinitdata    __section(.cpuinit.data)
-#define __cpuinitconst   __section(.cpuinit.rodata)
-#define __cpuexit        __section(.cpuexit.text) __exitused __cold notrace
-#define __cpuexitdata    __section(.cpuexit.data)
-#define __cpuexitconst   __section(.cpuexit.rodata)
-
-/* Used for MEMORY_HOTPLUG */
-#define __meminit        __section(.meminit.text) __cold notrace
-#define __meminitdata    __section(.meminit.data)
-#define __meminitconst   __section(.meminit.rodata)
-#define __memexit        __section(.memexit.text) __exitused __cold notrace
-#define __memexitdata    __section(.memexit.data)
-#define __memexitconst   __section(.memexit.rodata)
-
-/* For assembly routines */
-#define __HEAD		.section	".head.text","ax"
-#define __INIT		.section	".init.text","ax"
-#define __FINIT		.previous
-
-#define __INITDATA	.section	".init.data","aw",%progbits
-#define __INITRODATA	.section	".init.rodata","a",%progbits
-#define __FINITDATA	.previous
-
-#define __DEVINIT        .section	".devinit.text", "ax"
-#define __DEVINITDATA    .section	".devinit.data", "aw"
-#define __DEVINITRODATA  .section	".devinit.rodata", "a"
-
-#define __CPUINIT        .section	".cpuinit.text", "ax"
-#define __CPUINITDATA    .section	".cpuinit.data", "aw"
-#define __CPUINITRODATA  .section	".cpuinit.rodata", "a"
-
-#define __MEMINIT        .section	".meminit.text", "ax"
-#define __MEMINITDATA    .section	".meminit.data", "aw"
-#define __MEMINITRODATA  .section	".meminit.rodata", "a"
-
-/* silence warnings when references are OK */
-#define __REF            .section       ".ref.text", "ax"
-#define __REFDATA        .section       ".ref.data", "aw"
-#define __REFCONST       .section       ".ref.rodata", "a"
-
-#ifndef __ASSEMBLY__
-/*
- * Used for initialization calls..
- */
-typedef int (*initcall_t)(void);
-typedef void (*exitcall_t)(void);
-
-extern initcall_t __con_initcall_start[], __con_initcall_end[];
-extern initcall_t __security_initcall_start[], __security_initcall_end[];
-
-/* Used for contructor calls. */
-typedef void (*ctor_fn_t)(void);
-
-/* Defined in init/main.c */
-extern int do_one_initcall(initcall_t fn);
-extern char __initdata boot_command_line[];
-extern char *saved_command_line;
-extern unsigned int reset_devices;
-
-/* used by init/main.c */
-void setup_arch(char **);
-void prepare_namespace(void);
-
-extern void (*late_time_init)(void);
-
-extern bool initcall_debug;
-
-#endif
-  
-#ifndef MODULE
-
-#ifndef __ASSEMBLY__
-
-/* initcalls are now grouped by functionality into separate 
- * subsections. Ordering inside the subsections is determined
- * by link order. 
- * For backwards compatibility, initcall() puts the call in 
- * the device init subsection.
- *
- * The `id' arg to __define_initcall() is needed so that multiple initcalls
- * can point at the same handler without causing duplicate-symbol build errors.
- */
-
-#define __define_initcall(level,fn,id) \
-	static initcall_t __initcall_##fn##id __used \
-	__attribute__((__section__(".initcall" level ".init"))) = fn
-
-/*
- * Early initcalls run before initializing SMP.
- *
- * Only for built-in code, not modules.
- */
-#define early_initcall(fn)		__define_initcall("early",fn,early)
-
-/*
- * A "pure" initcall has no dependencies on anything else, and purely
- * initializes variables that couldn't be statically initialized.
- *
- * This only exists for built-in code, not for modules.
- */
-#define pure_initcall(fn)		__define_initcall("0",fn,0)
-
-#define core_initcall(fn)		__define_initcall("1",fn,1)
-#define core_initcall_sync(fn)		__define_initcall("1s",fn,1s)
-#define postcore_initcall(fn)		__define_initcall("2",fn,2)
-#define postcore_initcall_sync(fn)	__define_initcall("2s",fn,2s)
-#define arch_initcall(fn)		__define_initcall("3",fn,3)
-#define arch_initcall_sync(fn)		__define_initcall("3s",fn,3s)
-#define subsys_initcall(fn)		__define_initcall("4",fn,4)
-#define subsys_initcall_sync(fn)	__define_initcall("4s",fn,4s)
-#define fs_initcall(fn)			__define_initcall("5",fn,5)
-#define fs_initcall_sync(fn)		__define_initcall("5s",fn,5s)
-#define rootfs_initcall(fn)		__define_initcall("rootfs",fn,rootfs)
-#define device_initcall(fn)		__define_initcall("6",fn,6)
-#define device_initcall_sync(fn)	__define_initcall("6s",fn,6s)
-#define late_initcall(fn)		__define_initcall("7",fn,7)
-#define late_initcall_sync(fn)		__define_initcall("7s",fn,7s)
-
-#define __initcall(fn) device_initcall(fn)
-
-#define __exitcall(fn) \
-	static exitcall_t __exitcall_##fn __exit_call = fn
-
-#define console_initcall(fn) \
-	static initcall_t __initcall_##fn \
-	__used __section(.con_initcall.init) = fn
-
-#define security_initcall(fn) \
-	static initcall_t __initcall_##fn \
-	__used __section(.security_initcall.init) = fn
-
-struct obs_kernel_param {
-	const char *str;
-	int (*setup_func)(char *);
-	int early;
-};
-
-/*
- * Only for really core code.  See moduleparam.h for the normal way.
- *
- * Force the alignment so the compiler doesn't space elements of the
- * obs_kernel_param "array" too far apart in .init.setup.
- */
-#define __setup_param(str, unique_id, fn, early)			\
-	static const char __setup_str_##unique_id[] __initconst	\
-		__aligned(1) = str; \
-	static struct obs_kernel_param __setup_##unique_id	\
-		__used __section(.init.setup)			\
-		__attribute__((aligned((sizeof(long)))))	\
-		= { __setup_str_##unique_id, fn, early }
-
-#define __setup(str, fn)					\
-	__setup_param(str, fn, fn, 0)
-
-/* NOTE: fn is as per module_param, not __setup!  Emits warning if fn
- * returns non-zero. */
-#define early_param(str, fn)					\
-	__setup_param(str, fn, fn, 1)
-
-/* Relies on boot_command_line being set */
-void __init parse_early_param(void);
-void __init parse_early_options(char *cmdline);
-#endif /* __ASSEMBLY__ */
-
-/**
- * module_init() - driver initialization entry point
- * @x: function to be run at kernel boot time or module insertion
- * 
- * module_init() will either be called during do_initcalls() (if
- * builtin) or at module insertion time (if a module).  There can only
- * be one per module.
- */
-#define module_init(x)	__initcall(x);
-
-/**
- * module_exit() - driver exit entry point
- * @x: function to be run when driver is removed
- * 
- * module_exit() will wrap the driver clean-up code
- * with cleanup_module() when used with rmmod when
- * the driver is a module.  If the driver is statically
- * compiled into the kernel, module_exit() has no effect.
- * There can only be one per module.
- */
-#define module_exit(x)	__exitcall(x);
-
-#else /* MODULE */
-
-/* Don't use these in modules, but some people do... */
-#define early_initcall(fn)		module_init(fn)
-#define core_initcall(fn)		module_init(fn)
-#define postcore_initcall(fn)		module_init(fn)
-#define arch_initcall(fn)		module_init(fn)
-#define subsys_initcall(fn)		module_init(fn)
-#define fs_initcall(fn)			module_init(fn)
-#define device_initcall(fn)		module_init(fn)
-#define late_initcall(fn)		module_init(fn)
-
-#define security_initcall(fn)		module_init(fn)
-
-/* Each module must use one module_init(). */
-#define module_init(initfn)					\
-	static inline initcall_t __inittest(void)		\
-	{ return initfn; }					\
-	int init_module(void) __attribute__((alias(#initfn)));
-
-/* This is only required if you want to be unloadable. */
-#define module_exit(exitfn)					\
-	static inline exitcall_t __exittest(void)		\
-	{ return exitfn; }					\
-	void cleanup_module(void) __attribute__((alias(#exitfn)));
-
-#define __setup_param(str, unique_id, fn)	/* nothing */
-#define __setup(str, func) 			/* nothing */
-#endif
-
-/* Data marked not to be saved by software suspend */
-#define __nosavedata __section(.data..nosave)
-
-/* This means "can be init if no module support, otherwise module load
-   may call it." */
-#ifdef CONFIG_MODULES
-#define __init_or_module
-#define __initdata_or_module
-#define __initconst_or_module
-#define __INIT_OR_MODULE	.text
-#define __INITDATA_OR_MODULE	.data
-#define __INITRODATA_OR_MODULE	.section ".rodata","a",%progbits
-#else
-#define __init_or_module __init
-#define __initdata_or_module __initdata
-#define __initconst_or_module __initconst
-#define __INIT_OR_MODULE __INIT
-#define __INITDATA_OR_MODULE __INITDATA
-#define __INITRODATA_OR_MODULE __INITRODATA
-#endif /*CONFIG_MODULES*/
-
-/* Functions marked as __devexit may be discarded at kernel link time, depending
-   on config options.  Newer versions of binutils detect references from
-   retained sections to discarded sections and flag an error.  Pointers to
-   __devexit functions must use __devexit_p(function_name), the wrapper will
-   insert either the function_name or NULL, depending on the config options.
- */
-#if defined(MODULE) || defined(CONFIG_HOTPLUG)
-#define __devexit_p(x) x
-#else
-#define __devexit_p(x) NULL
-#endif
-
-#ifdef MODULE
-#define __exit_p(x) x
-#else
-#define __exit_p(x) NULL
-#endif
-
-#endif /* _LINUX_INIT_H */
diff --git a/ANDROID_3.4.5/include/linux/init_ohci1394_dma.h b/ANDROID_3.4.5/include/linux/init_ohci1394_dma.h
deleted file mode 100644
index 3c03a4bb..00000000
--- a/ANDROID_3.4.5/include/linux/init_ohci1394_dma.h
+++ /dev/null
@@ -1,4 +0,0 @@
-#ifdef CONFIG_PROVIDE_OHCI1394_DMA_INIT
-extern int __initdata init_ohci1394_dma_early;
-extern void __init init_ohci1394_dma_on_all_controllers(void);
-#endif
diff --git a/ANDROID_3.4.5/include/linux/init_task.h b/ANDROID_3.4.5/include/linux/init_task.h
deleted file mode 100644
index e4baff5f..00000000
--- a/ANDROID_3.4.5/include/linux/init_task.h
+++ /dev/null
@@ -1,217 +0,0 @@
-#ifndef _LINUX__INIT_TASK_H
-#define _LINUX__INIT_TASK_H
-
-#include <linux/rcupdate.h>
-#include <linux/irqflags.h>
-#include <linux/utsname.h>
-#include <linux/lockdep.h>
-#include <linux/ftrace.h>
-#include <linux/ipc.h>
-#include <linux/pid_namespace.h>
-#include <linux/user_namespace.h>
-#include <linux/securebits.h>
-#include <net/net_namespace.h>
-
-#ifdef CONFIG_SMP
-# define INIT_PUSHABLE_TASKS(tsk)					\
-	.pushable_tasks = PLIST_NODE_INIT(tsk.pushable_tasks, MAX_PRIO),
-#else
-# define INIT_PUSHABLE_TASKS(tsk)
-#endif
-
-extern struct files_struct init_files;
-extern struct fs_struct init_fs;
-
-#ifdef CONFIG_CGROUPS
-#define INIT_GROUP_RWSEM(sig)						\
-	.group_rwsem = __RWSEM_INITIALIZER(sig.group_rwsem),
-#else
-#define INIT_GROUP_RWSEM(sig)
-#endif
-
-#ifdef CONFIG_CPUSETS
-#define INIT_CPUSET_SEQ							\
-	.mems_allowed_seq = SEQCNT_ZERO,
-#else
-#define INIT_CPUSET_SEQ
-#endif
-
-#define INIT_SIGNALS(sig) {						\
-	.nr_threads	= 1,						\
-	.wait_chldexit	= __WAIT_QUEUE_HEAD_INITIALIZER(sig.wait_chldexit),\
-	.shared_pending	= { 						\
-		.list = LIST_HEAD_INIT(sig.shared_pending.list),	\
-		.signal =  {{0}}},					\
-	.posix_timers	 = LIST_HEAD_INIT(sig.posix_timers),		\
-	.cpu_timers	= INIT_CPU_TIMERS(sig.cpu_timers),		\
-	.rlim		= INIT_RLIMITS,					\
-	.cputimer	= { 						\
-		.cputime = INIT_CPUTIME,				\
-		.running = 0,						\
-		.lock = __RAW_SPIN_LOCK_UNLOCKED(sig.cputimer.lock),	\
-	},								\
-	.cred_guard_mutex =						\
-		 __MUTEX_INITIALIZER(sig.cred_guard_mutex),		\
-	INIT_GROUP_RWSEM(sig)						\
-}
-
-extern struct nsproxy init_nsproxy;
-
-#define INIT_SIGHAND(sighand) {						\
-	.count		= ATOMIC_INIT(1), 				\
-	.action		= { { { .sa_handler = SIG_DFL, } }, },		\
-	.siglock	= __SPIN_LOCK_UNLOCKED(sighand.siglock),	\
-	.signalfd_wqh	= __WAIT_QUEUE_HEAD_INITIALIZER(sighand.signalfd_wqh),	\
-}
-
-extern struct group_info init_groups;
-
-#define INIT_STRUCT_PID {						\
-	.count 		= ATOMIC_INIT(1),				\
-	.tasks		= {						\
-		{ .first = NULL },					\
-		{ .first = NULL },					\
-		{ .first = NULL },					\
-	},								\
-	.level		= 0,						\
-	.numbers	= { {						\
-		.nr		= 0,					\
-		.ns		= &init_pid_ns,				\
-		.pid_chain	= { .next = NULL, .pprev = NULL },	\
-	}, }								\
-}
-
-#define INIT_PID_LINK(type) 					\
-{								\
-	.node = {						\
-		.next = NULL,					\
-		.pprev = NULL,					\
-	},							\
-	.pid = &init_struct_pid,				\
-}
-
-#ifdef CONFIG_AUDITSYSCALL
-#define INIT_IDS \
-	.loginuid = -1, \
-	.sessionid = -1,
-#else
-#define INIT_IDS
-#endif
-
-#ifdef CONFIG_RCU_BOOST
-#define INIT_TASK_RCU_BOOST()						\
-	.rcu_boost_mutex = NULL,
-#else
-#define INIT_TASK_RCU_BOOST()
-#endif
-#ifdef CONFIG_TREE_PREEMPT_RCU
-#define INIT_TASK_RCU_TREE_PREEMPT()					\
-	.rcu_blocked_node = NULL,
-#else
-#define INIT_TASK_RCU_TREE_PREEMPT(tsk)
-#endif
-#ifdef CONFIG_PREEMPT_RCU
-#define INIT_TASK_RCU_PREEMPT(tsk)					\
-	.rcu_read_lock_nesting = 0,					\
-	.rcu_read_unlock_special = 0,					\
-	.rcu_node_entry = LIST_HEAD_INIT(tsk.rcu_node_entry),		\
-	INIT_TASK_RCU_TREE_PREEMPT()					\
-	INIT_TASK_RCU_BOOST()
-#else
-#define INIT_TASK_RCU_PREEMPT(tsk)
-#endif
-
-extern struct cred init_cred;
-
-#ifdef CONFIG_PERF_EVENTS
-# define INIT_PERF_EVENTS(tsk)					\
-	.perf_event_mutex = 						\
-		 __MUTEX_INITIALIZER(tsk.perf_event_mutex),		\
-	.perf_event_list = LIST_HEAD_INIT(tsk.perf_event_list),
-#else
-# define INIT_PERF_EVENTS(tsk)
-#endif
-
-#define INIT_TASK_COMM "swapper"
-
-/*
- *  INIT_TASK is used to set up the first task table, touch at
- * your own risk!. Base=0, limit=0x1fffff (=2MB)
- */
-#define INIT_TASK(tsk)	\
-{									\
-	.state		= 0,						\
-	.stack		= &init_thread_info,				\
-	.usage		= ATOMIC_INIT(2),				\
-	.flags		= PF_KTHREAD,					\
-	.prio		= MAX_PRIO-20,					\
-	.static_prio	= MAX_PRIO-20,					\
-	.normal_prio	= MAX_PRIO-20,					\
-	.policy		= SCHED_NORMAL,					\
-	.cpus_allowed	= CPU_MASK_ALL,					\
-	.mm		= NULL,						\
-	.active_mm	= &init_mm,					\
-	.se		= {						\
-		.group_node 	= LIST_HEAD_INIT(tsk.se.group_node),	\
-	},								\
-	.rt		= {						\
-		.run_list	= LIST_HEAD_INIT(tsk.rt.run_list),	\
-		.time_slice	= RR_TIMESLICE,				\
-		.nr_cpus_allowed = NR_CPUS,				\
-	},								\
-	.tasks		= LIST_HEAD_INIT(tsk.tasks),			\
-	INIT_PUSHABLE_TASKS(tsk)					\
-	.ptraced	= LIST_HEAD_INIT(tsk.ptraced),			\
-	.ptrace_entry	= LIST_HEAD_INIT(tsk.ptrace_entry),		\
-	.real_parent	= &tsk,						\
-	.parent		= &tsk,						\
-	.children	= LIST_HEAD_INIT(tsk.children),			\
-	.sibling	= LIST_HEAD_INIT(tsk.sibling),			\
-	.group_leader	= &tsk,						\
-	RCU_INIT_POINTER(.real_cred, &init_cred),			\
-	RCU_INIT_POINTER(.cred, &init_cred),				\
-	.comm		= INIT_TASK_COMM,				\
-	.thread		= INIT_THREAD,					\
-	.fs		= &init_fs,					\
-	.files		= &init_files,					\
-	.signal		= &init_signals,				\
-	.sighand	= &init_sighand,				\
-	.nsproxy	= &init_nsproxy,				\
-	.pending	= {						\
-		.list = LIST_HEAD_INIT(tsk.pending.list),		\
-		.signal = {{0}}},					\
-	.blocked	= {{0}},					\
-	.alloc_lock	= __SPIN_LOCK_UNLOCKED(tsk.alloc_lock),		\
-	.journal_info	= NULL,						\
-	.cpu_timers	= INIT_CPU_TIMERS(tsk.cpu_timers),		\
-	.pi_lock	= __RAW_SPIN_LOCK_UNLOCKED(tsk.pi_lock),	\
-	.timer_slack_ns = 50000, /* 50 usec default slack */		\
-	.pids = {							\
-		[PIDTYPE_PID]  = INIT_PID_LINK(PIDTYPE_PID),		\
-		[PIDTYPE_PGID] = INIT_PID_LINK(PIDTYPE_PGID),		\
-		[PIDTYPE_SID]  = INIT_PID_LINK(PIDTYPE_SID),		\
-	},								\
-	.thread_group	= LIST_HEAD_INIT(tsk.thread_group),		\
-	INIT_IDS							\
-	INIT_PERF_EVENTS(tsk)						\
-	INIT_TRACE_IRQFLAGS						\
-	INIT_LOCKDEP							\
-	INIT_FTRACE_GRAPH						\
-	INIT_TRACE_RECURSION						\
-	INIT_TASK_RCU_PREEMPT(tsk)					\
-	INIT_CPUSET_SEQ							\
-}
-
-
-#define INIT_CPU_TIMERS(cpu_timers)					\
-{									\
-	LIST_HEAD_INIT(cpu_timers[0]),					\
-	LIST_HEAD_INIT(cpu_timers[1]),					\
-	LIST_HEAD_INIT(cpu_timers[2]),					\
-}
-
-/* Attach to the init_task data structure for proper alignment */
-#define __init_task_data __attribute__((__section__(".data..init_task")))
-
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/initrd.h b/ANDROID_3.4.5/include/linux/initrd.h
deleted file mode 100644
index 55289d26..00000000
--- a/ANDROID_3.4.5/include/linux/initrd.h
+++ /dev/null
@@ -1,20 +0,0 @@
-
-#define INITRD_MINOR 250 /* shouldn't collide with /dev/ram* too soon ... */
-
-/* 1 = load ramdisk, 0 = don't load */
-extern int rd_doload;
-
-/* 1 = prompt for ramdisk, 0 = don't prompt */
-extern int rd_prompt;
-
-/* starting block # of image */
-extern int rd_image_start;
-
-/* 1 if it is not an error if initrd_start < memory_start */
-extern int initrd_below_start_ok;
-
-/* free_initrd_mem always gets called with the next two as arguments.. */
-extern unsigned long initrd_start, initrd_end;
-extern void free_initrd_mem(unsigned long, unsigned long);
-
-extern unsigned int real_root_dev;
diff --git a/ANDROID_3.4.5/include/linux/inotify.h b/ANDROID_3.4.5/include/linux/inotify.h
deleted file mode 100644
index d33041e2..00000000
--- a/ANDROID_3.4.5/include/linux/inotify.h
+++ /dev/null
@@ -1,87 +0,0 @@
-/*
- * Inode based directory notification for Linux
- *
- * Copyright (C) 2005 John McCutchan
- */
-
-#ifndef _LINUX_INOTIFY_H
-#define _LINUX_INOTIFY_H
-
-/* For O_CLOEXEC and O_NONBLOCK */
-#include <linux/fcntl.h>
-#include <linux/types.h>
-
-/*
- * struct inotify_event - structure read from the inotify device for each event
- *
- * When you are watching a directory, you will receive the filename for events
- * such as IN_CREATE, IN_DELETE, IN_OPEN, IN_CLOSE, ..., relative to the wd.
- */
-struct inotify_event {
-	__s32		wd;		/* watch descriptor */
-	__u32		mask;		/* watch mask */
-	__u32		cookie;		/* cookie to synchronize two events */
-	__u32		len;		/* length (including nulls) of name */
-	char		name[0];	/* stub for possible name */
-};
-
-/* the following are legal, implemented events that user-space can watch for */
-#define IN_ACCESS		0x00000001	/* File was accessed */
-#define IN_MODIFY		0x00000002	/* File was modified */
-#define IN_ATTRIB		0x00000004	/* Metadata changed */
-#define IN_CLOSE_WRITE		0x00000008	/* Writtable file was closed */
-#define IN_CLOSE_NOWRITE	0x00000010	/* Unwrittable file closed */
-#define IN_OPEN			0x00000020	/* File was opened */
-#define IN_MOVED_FROM		0x00000040	/* File was moved from X */
-#define IN_MOVED_TO		0x00000080	/* File was moved to Y */
-#define IN_CREATE		0x00000100	/* Subfile was created */
-#define IN_DELETE		0x00000200	/* Subfile was deleted */
-#define IN_DELETE_SELF		0x00000400	/* Self was deleted */
-#define IN_MOVE_SELF		0x00000800	/* Self was moved */
-
-/* the following are legal events.  they are sent as needed to any watch */
-#define IN_UNMOUNT		0x00002000	/* Backing fs was unmounted */
-#define IN_Q_OVERFLOW		0x00004000	/* Event queued overflowed */
-#define IN_IGNORED		0x00008000	/* File was ignored */
-
-/* helper events */
-#define IN_CLOSE		(IN_CLOSE_WRITE | IN_CLOSE_NOWRITE) /* close */
-#define IN_MOVE			(IN_MOVED_FROM | IN_MOVED_TO) /* moves */
-
-/* special flags */
-#define IN_ONLYDIR		0x01000000	/* only watch the path if it is a directory */
-#define IN_DONT_FOLLOW		0x02000000	/* don't follow a sym link */
-#define IN_EXCL_UNLINK		0x04000000	/* exclude events on unlinked objects */
-#define IN_MASK_ADD		0x20000000	/* add to the mask of an already existing watch */
-#define IN_ISDIR		0x40000000	/* event occurred against dir */
-#define IN_ONESHOT		0x80000000	/* only send event once */
-
-/*
- * All of the events - we build the list by hand so that we can add flags in
- * the future and not break backward compatibility.  Apps will get only the
- * events that they originally wanted.  Be sure to add new events here!
- */
-#define IN_ALL_EVENTS	(IN_ACCESS | IN_MODIFY | IN_ATTRIB | IN_CLOSE_WRITE | \
-			 IN_CLOSE_NOWRITE | IN_OPEN | IN_MOVED_FROM | \
-			 IN_MOVED_TO | IN_DELETE | IN_CREATE | IN_DELETE_SELF | \
-			 IN_MOVE_SELF)
-
-/* Flags for sys_inotify_init1.  */
-#define IN_CLOEXEC O_CLOEXEC
-#define IN_NONBLOCK O_NONBLOCK
-
-#ifdef __KERNEL__
-#include <linux/sysctl.h>
-extern struct ctl_table inotify_table[]; /* for sysctl */
-
-#define ALL_INOTIFY_BITS (IN_ACCESS | IN_MODIFY | IN_ATTRIB | IN_CLOSE_WRITE | \
-			  IN_CLOSE_NOWRITE | IN_OPEN | IN_MOVED_FROM | \
-			  IN_MOVED_TO | IN_CREATE | IN_DELETE | \
-			  IN_DELETE_SELF | IN_MOVE_SELF | IN_UNMOUNT | \
-			  IN_Q_OVERFLOW | IN_IGNORED | IN_ONLYDIR | \
-			  IN_DONT_FOLLOW | IN_EXCL_UNLINK | IN_MASK_ADD | \
-			  IN_ISDIR | IN_ONESHOT)
-
-#endif
-
-#endif	/* _LINUX_INOTIFY_H */
diff --git a/ANDROID_3.4.5/include/linux/input-polldev.h b/ANDROID_3.4.5/include/linux/input-polldev.h
deleted file mode 100644
index ce0b7246..00000000
--- a/ANDROID_3.4.5/include/linux/input-polldev.h
+++ /dev/null
@@ -1,58 +0,0 @@
-#ifndef _INPUT_POLLDEV_H
-#define _INPUT_POLLDEV_H
-
-/*
- * Copyright (c) 2007 Dmitry Torokhov
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-
-#include <linux/input.h>
-#include <linux/workqueue.h>
-
-/**
- * struct input_polled_dev - simple polled input device
- * @private: private driver data.
- * @open: driver-supplied method that prepares device for polling
- *	(enabled the device and maybe flushes device state).
- * @close: driver-supplied method that is called when device is no
- *	longer being polled. Used to put device into low power mode.
- * @poll: driver-supplied method that polls the device and posts
- *	input events (mandatory).
- * @poll_interval: specifies how often the poll() method should be called.
- *	Defaults to 500 msec unless overridden when registering the device.
- * @poll_interval_max: specifies upper bound for the poll interval.
- *	Defaults to the initial value of @poll_interval.
- * @poll_interval_min: specifies lower bound for the poll interval.
- *	Defaults to 0.
- * @input: input device structure associated with the polled device.
- *	Must be properly initialized by the driver (id, name, phys, bits).
- *
- * Polled input device provides a skeleton for supporting simple input
- * devices that do not raise interrupts but have to be periodically
- * scanned or polled to detect changes in their state.
- */
-struct input_polled_dev {
-	void *private;
-
-	void (*open)(struct input_polled_dev *dev);
-	void (*close)(struct input_polled_dev *dev);
-	void (*poll)(struct input_polled_dev *dev);
-	unsigned int poll_interval; /* msec */
-	unsigned int poll_interval_max; /* msec */
-	unsigned int poll_interval_min; /* msec */
-
-	struct input_dev *input;
-
-/* private: */
-	struct delayed_work work;
-};
-
-struct input_polled_dev *input_allocate_polled_device(void);
-void input_free_polled_device(struct input_polled_dev *dev);
-int input_register_polled_device(struct input_polled_dev *dev);
-void input_unregister_polled_device(struct input_polled_dev *dev);
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/input.h b/ANDROID_3.4.5/include/linux/input.h
deleted file mode 100644
index 49fb20e3..00000000
--- a/ANDROID_3.4.5/include/linux/input.h
+++ /dev/null
@@ -1,1656 +0,0 @@
-#ifndef _INPUT_H
-#define _INPUT_H
-
-/*
- * Copyright (c) 1999-2002 Vojtech Pavlik
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-
-#ifdef __KERNEL__
-#include <linux/time.h>
-#include <linux/list.h>
-#else
-#include <sys/time.h>
-#include <sys/ioctl.h>
-#include <sys/types.h>
-#include <linux/types.h>
-#endif
-
-/*
- * The event structure itself
- */
-
-struct input_event {
-	struct timeval time;
-	__u16 type;
-	__u16 code;
-	__s32 value;
-};
-
-/*
- * Protocol version.
- */
-
-#define EV_VERSION		0x010001
-
-/*
- * IOCTLs (0x00 - 0x7f)
- */
-
-struct input_id {
-	__u16 bustype;
-	__u16 vendor;
-	__u16 product;
-	__u16 version;
-};
-
-/**
- * struct input_absinfo - used by EVIOCGABS/EVIOCSABS ioctls
- * @value: latest reported value for the axis.
- * @minimum: specifies minimum value for the axis.
- * @maximum: specifies maximum value for the axis.
- * @fuzz: specifies fuzz value that is used to filter noise from
- *	the event stream.
- * @flat: values that are within this value will be discarded by
- *	joydev interface and reported as 0 instead.
- * @resolution: specifies resolution for the values reported for
- *	the axis.
- *
- * Note that input core does not clamp reported values to the
- * [minimum, maximum] limits, such task is left to userspace.
- *
- * Resolution for main axes (ABS_X, ABS_Y, ABS_Z) is reported in
- * units per millimeter (units/mm), resolution for rotational axes
- * (ABS_RX, ABS_RY, ABS_RZ) is reported in units per radian.
- */
-struct input_absinfo {
-	__s32 value;
-	__s32 minimum;
-	__s32 maximum;
-	__s32 fuzz;
-	__s32 flat;
-	__s32 resolution;
-};
-
-/**
- * struct input_keymap_entry - used by EVIOCGKEYCODE/EVIOCSKEYCODE ioctls
- * @scancode: scancode represented in machine-endian form.
- * @len: length of the scancode that resides in @scancode buffer.
- * @index: index in the keymap, may be used instead of scancode
- * @flags: allows to specify how kernel should handle the request. For
- *	example, setting INPUT_KEYMAP_BY_INDEX flag indicates that kernel
- *	should perform lookup in keymap by @index instead of @scancode
- * @keycode: key code assigned to this scancode
- *
- * The structure is used to retrieve and modify keymap data. Users have
- * option of performing lookup either by @scancode itself or by @index
- * in keymap entry. EVIOCGKEYCODE will also return scancode or index
- * (depending on which element was used to perform lookup).
- */
-struct input_keymap_entry {
-#define INPUT_KEYMAP_BY_INDEX	(1 << 0)
-	__u8  flags;
-	__u8  len;
-	__u16 index;
-	__u32 keycode;
-	__u8  scancode[32];
-};
-
-#define EVIOCGVERSION		_IOR('E', 0x01, int)			/* get driver version */
-#define EVIOCGID		_IOR('E', 0x02, struct input_id)	/* get device ID */
-#define EVIOCGREP		_IOR('E', 0x03, unsigned int[2])	/* get repeat settings */
-#define EVIOCSREP		_IOW('E', 0x03, unsigned int[2])	/* set repeat settings */
-
-#define EVIOCGKEYCODE		_IOR('E', 0x04, unsigned int[2])        /* get keycode */
-#define EVIOCGKEYCODE_V2	_IOR('E', 0x04, struct input_keymap_entry)
-#define EVIOCSKEYCODE		_IOW('E', 0x04, unsigned int[2])        /* set keycode */
-#define EVIOCSKEYCODE_V2	_IOW('E', 0x04, struct input_keymap_entry)
-
-#define EVIOCGNAME(len)		_IOC(_IOC_READ, 'E', 0x06, len)		/* get device name */
-#define EVIOCGPHYS(len)		_IOC(_IOC_READ, 'E', 0x07, len)		/* get physical location */
-#define EVIOCGUNIQ(len)		_IOC(_IOC_READ, 'E', 0x08, len)		/* get unique identifier */
-#define EVIOCGPROP(len)		_IOC(_IOC_READ, 'E', 0x09, len)		/* get device properties */
-
-/**
- * EVIOCGMTSLOTS(len) - get MT slot values
- *
- * The ioctl buffer argument should be binary equivalent to
- *
- * struct input_mt_request_layout {
- *	__u32 code;
- *	__s32 values[num_slots];
- * };
- *
- * where num_slots is the (arbitrary) number of MT slots to extract.
- *
- * The ioctl size argument (len) is the size of the buffer, which
- * should satisfy len = (num_slots + 1) * sizeof(__s32).  If len is
- * too small to fit all available slots, the first num_slots are
- * returned.
- *
- * Before the call, code is set to the wanted ABS_MT event type. On
- * return, values[] is filled with the slot values for the specified
- * ABS_MT code.
- *
- * If the request code is not an ABS_MT value, -EINVAL is returned.
- */
-#define EVIOCGMTSLOTS(len)	_IOC(_IOC_READ, 'E', 0x0a, len)
-
-#define EVIOCGKEY(len)		_IOC(_IOC_READ, 'E', 0x18, len)		/* get global key state */
-#define EVIOCGLED(len)		_IOC(_IOC_READ, 'E', 0x19, len)		/* get all LEDs */
-#define EVIOCGSND(len)		_IOC(_IOC_READ, 'E', 0x1a, len)		/* get all sounds status */
-#define EVIOCGSW(len)		_IOC(_IOC_READ, 'E', 0x1b, len)		/* get all switch states */
-
-#define EVIOCGBIT(ev,len)	_IOC(_IOC_READ, 'E', 0x20 + (ev), len)	/* get event bits */
-#define EVIOCGABS(abs)		_IOR('E', 0x40 + (abs), struct input_absinfo)	/* get abs value/limits */
-#define EVIOCSABS(abs)		_IOW('E', 0xc0 + (abs), struct input_absinfo)	/* set abs value/limits */
-
-#define EVIOCSFF		_IOC(_IOC_WRITE, 'E', 0x80, sizeof(struct ff_effect))	/* send a force effect to a force feedback device */
-#define EVIOCRMFF		_IOW('E', 0x81, int)			/* Erase a force effect */
-#define EVIOCGEFFECTS		_IOR('E', 0x84, int)			/* Report number of effects playable at the same time */
-
-#define EVIOCGRAB		_IOW('E', 0x90, int)			/* Grab/Release device */
-
-#define EVIOCGSUSPENDBLOCK	_IOR('E', 0x91, int)			/* get suspend block enable */
-#define EVIOCSSUSPENDBLOCK	_IOW('E', 0x91, int)			/* set suspend block enable */
-
-#define EVIOCSCLOCKID		_IOW('E', 0xa0, int)			/* Set clockid to be used for timestamps */
-
-/*
- * Device properties and quirks
- */
-
-#define INPUT_PROP_POINTER		0x00	/* needs a pointer */
-#define INPUT_PROP_DIRECT		0x01	/* direct input devices */
-#define INPUT_PROP_BUTTONPAD		0x02	/* has button(s) under pad */
-#define INPUT_PROP_SEMI_MT		0x03	/* touch rectangle only */
-
-#define INPUT_PROP_MAX			0x1f
-#define INPUT_PROP_CNT			(INPUT_PROP_MAX + 1)
-
-/*
- * Event types
- */
-
-#define EV_SYN			0x00
-#define EV_KEY			0x01
-#define EV_REL			0x02
-#define EV_ABS			0x03
-#define EV_MSC			0x04
-#define EV_SW			0x05
-#define EV_LED			0x11
-#define EV_SND			0x12
-#define EV_REP			0x14
-#define EV_FF			0x15
-#define EV_PWR			0x16
-#define EV_FF_STATUS		0x17
-#define EV_MAX			0x1f
-#define EV_CNT			(EV_MAX+1)
-
-/*
- * Synchronization events.
- */
-
-#define SYN_REPORT		0
-#define SYN_CONFIG		1
-#define SYN_MT_REPORT		2
-#define SYN_DROPPED		3
-
-/*
- * Keys and buttons
- *
- * Most of the keys/buttons are modeled after USB HUT 1.12
- * (see http://www.usb.org/developers/hidpage).
- * Abbreviations in the comments:
- * AC - Application Control
- * AL - Application Launch Button
- * SC - System Control
- */
-
-#define KEY_RESERVED		0
-#define KEY_ESC			1
-#define KEY_1			2
-#define KEY_2			3
-#define KEY_3			4
-#define KEY_4			5
-#define KEY_5			6
-#define KEY_6			7
-#define KEY_7			8
-#define KEY_8			9
-#define KEY_9			10
-#define KEY_0			11
-#define KEY_MINUS		12
-#define KEY_EQUAL		13
-#define KEY_BACKSPACE		14
-#define KEY_TAB			15
-#define KEY_Q			16
-#define KEY_W			17
-#define KEY_E			18
-#define KEY_R			19
-#define KEY_T			20
-#define KEY_Y			21
-#define KEY_U			22
-#define KEY_I			23
-#define KEY_O			24
-#define KEY_P			25
-#define KEY_LEFTBRACE		26
-#define KEY_RIGHTBRACE		27
-#define KEY_ENTER		28
-#define KEY_LEFTCTRL		29
-#define KEY_A			30
-#define KEY_S			31
-#define KEY_D			32
-#define KEY_F			33
-#define KEY_G			34
-#define KEY_H			35
-#define KEY_J			36
-#define KEY_K			37
-#define KEY_L			38
-#define KEY_SEMICOLON		39
-#define KEY_APOSTROPHE		40
-#define KEY_GRAVE		41
-#define KEY_LEFTSHIFT		42
-#define KEY_BACKSLASH		43
-#define KEY_Z			44
-#define KEY_X			45
-#define KEY_C			46
-#define KEY_V			47
-#define KEY_B			48
-#define KEY_N			49
-#define KEY_M			50
-#define KEY_COMMA		51
-#define KEY_DOT			52
-#define KEY_SLASH		53
-#define KEY_RIGHTSHIFT		54
-#define KEY_KPASTERISK		55
-#define KEY_LEFTALT		56
-#define KEY_SPACE		57
-#define KEY_CAPSLOCK		58
-#define KEY_F1			59
-#define KEY_F2			60
-#define KEY_F3			61
-#define KEY_F4			62
-#define KEY_F5			63
-#define KEY_F6			64
-#define KEY_F7			65
-#define KEY_F8			66
-#define KEY_F9			67
-#define KEY_F10			68
-#define KEY_NUMLOCK		69
-#define KEY_SCROLLLOCK		70
-#define KEY_KP7			71
-#define KEY_KP8			72
-#define KEY_KP9			73
-#define KEY_KPMINUS		74
-#define KEY_KP4			75
-#define KEY_KP5			76
-#define KEY_KP6			77
-#define KEY_KPPLUS		78
-#define KEY_KP1			79
-#define KEY_KP2			80
-#define KEY_KP3			81
-#define KEY_KP0			82
-#define KEY_KPDOT		83
-
-#define KEY_ZENKAKUHANKAKU	85
-#define KEY_102ND		86
-#define KEY_F11			87
-#define KEY_F12			88
-#define KEY_RO			89
-#define KEY_KATAKANA		90
-#define KEY_HIRAGANA		91
-#define KEY_HENKAN		92
-#define KEY_KATAKANAHIRAGANA	93
-#define KEY_MUHENKAN		94
-#define KEY_KPJPCOMMA		95
-#define KEY_KPENTER		96
-#define KEY_RIGHTCTRL		97
-#define KEY_KPSLASH		98
-#define KEY_SYSRQ		99
-#define KEY_RIGHTALT		100
-#define KEY_LINEFEED		101
-#define KEY_HOME		102
-#define KEY_UP			103
-#define KEY_PAGEUP		104
-#define KEY_LEFT		105
-#define KEY_RIGHT		106
-#define KEY_END			107
-#define KEY_DOWN		108
-#define KEY_PAGEDOWN		109
-#define KEY_INSERT		110
-#define KEY_DELETE		111
-#define KEY_MACRO		112
-#define KEY_MUTE		113
-#define KEY_VOLUMEDOWN		114
-#define KEY_VOLUMEUP		115
-#define KEY_POWER		116	/* SC System Power Down */
-#define KEY_KPEQUAL		117
-#define KEY_KPPLUSMINUS		118
-#define KEY_PAUSE		119
-#define KEY_SCALE		120	/* AL Compiz Scale (Expose) */
-
-#define KEY_KPCOMMA		121
-#define KEY_HANGEUL		122
-#define KEY_HANGUEL		KEY_HANGEUL
-#define KEY_HANJA		123
-#define KEY_YEN			124
-#define KEY_LEFTMETA		125
-#define KEY_RIGHTMETA		126
-#define KEY_COMPOSE		127
-
-#define KEY_STOP		128	/* AC Stop */
-#define KEY_AGAIN		129
-#define KEY_PROPS		130	/* AC Properties */
-#define KEY_UNDO		131	/* AC Undo */
-#define KEY_FRONT		132
-#define KEY_COPY		133	/* AC Copy */
-#define KEY_OPEN		134	/* AC Open */
-#define KEY_PASTE		135	/* AC Paste */
-#define KEY_FIND		136	/* AC Search */
-#define KEY_CUT			137	/* AC Cut */
-#define KEY_HELP		138	/* AL Integrated Help Center */
-#define KEY_MENU		139	/* Menu (show menu) */
-#define KEY_CALC		140	/* AL Calculator */
-#define KEY_SETUP		141
-#define KEY_SLEEP		142	/* SC System Sleep */
-#define KEY_WAKEUP		143	/* System Wake Up */
-#define KEY_FILE		144	/* AL Local Machine Browser */
-#define KEY_SENDFILE		145
-#define KEY_DELETEFILE		146
-#define KEY_XFER		147
-#define KEY_PROG1		148
-#define KEY_PROG2		149
-#define KEY_WWW			150	/* AL Internet Browser */
-#define KEY_MSDOS		151
-#define KEY_COFFEE		152	/* AL Terminal Lock/Screensaver */
-#define KEY_SCREENLOCK		KEY_COFFEE
-#define KEY_DIRECTION		153
-#define KEY_CYCLEWINDOWS	154
-#define KEY_MAIL		155
-#define KEY_BOOKMARKS		156	/* AC Bookmarks */
-#define KEY_COMPUTER		157
-#define KEY_BACK		158	/* AC Back */
-#define KEY_FORWARD		159	/* AC Forward */
-#define KEY_CLOSECD		160
-#define KEY_EJECTCD		161
-#define KEY_EJECTCLOSECD	162
-#define KEY_NEXTSONG		163
-#define KEY_PLAYPAUSE		164
-#define KEY_PREVIOUSSONG	165
-#define KEY_STOPCD		166
-#define KEY_RECORD		167
-#define KEY_REWIND		168
-#define KEY_PHONE		169	/* Media Select Telephone */
-#define KEY_ISO			170
-#define KEY_CONFIG		171	/* AL Consumer Control Configuration */
-#define KEY_HOMEPAGE		172	/* AC Home */
-#define KEY_REFRESH		173	/* AC Refresh */
-#define KEY_EXIT		174	/* AC Exit */
-#define KEY_MOVE		175
-#define KEY_EDIT		176
-#define KEY_SCROLLUP		177
-#define KEY_SCROLLDOWN		178
-#define KEY_KPLEFTPAREN		179
-#define KEY_KPRIGHTPAREN	180
-#define KEY_NEW			181	/* AC New */
-#define KEY_REDO		182	/* AC Redo/Repeat */
-
-#define KEY_F13			183
-#define KEY_F14			184
-#define KEY_F15			185
-#define KEY_F16			186
-#define KEY_F17			187
-#define KEY_F18			188
-#define KEY_F19			189
-#define KEY_F20			190
-#define KEY_F21			191
-#define KEY_F22			192
-#define KEY_F23			193
-#define KEY_F24			194
-
-#define KEY_PLAYCD		200
-#define KEY_PAUSECD		201
-#define KEY_PROG3		202
-#define KEY_PROG4		203
-#define KEY_DASHBOARD		204	/* AL Dashboard */
-#define KEY_SUSPEND		205
-#define KEY_CLOSE		206	/* AC Close */
-#define KEY_PLAY		207
-#define KEY_FASTFORWARD		208
-#define KEY_BASSBOOST		209
-#define KEY_PRINT		210	/* AC Print */
-#define KEY_HP			211
-#define KEY_CAMERA		212
-#define KEY_SOUND		213
-#define KEY_QUESTION		214
-#define KEY_EMAIL		215
-#define KEY_CHAT		216
-#define KEY_SEARCH		217
-#define KEY_CONNECT		218
-#define KEY_FINANCE		219	/* AL Checkbook/Finance */
-#define KEY_SPORT		220
-#define KEY_SHOP		221
-#define KEY_ALTERASE		222
-#define KEY_CANCEL		223	/* AC Cancel */
-#define KEY_BRIGHTNESSDOWN	224
-#define KEY_BRIGHTNESSUP	225
-#define KEY_MEDIA		226
-
-#define KEY_SWITCHVIDEOMODE	227	/* Cycle between available video
-					   outputs (Monitor/LCD/TV-out/etc) */
-#define KEY_KBDILLUMTOGGLE	228
-#define KEY_KBDILLUMDOWN	229
-#define KEY_KBDILLUMUP		230
-
-#define KEY_SEND		231	/* AC Send */
-#define KEY_REPLY		232	/* AC Reply */
-#define KEY_FORWARDMAIL		233	/* AC Forward Msg */
-#define KEY_SAVE		234	/* AC Save */
-#define KEY_DOCUMENTS		235
-
-#define KEY_BATTERY		236
-
-#define KEY_BLUETOOTH		237
-#define KEY_WLAN		238
-#define KEY_UWB			239
-
-#define KEY_UNKNOWN		240
-
-#define KEY_VIDEO_NEXT		241	/* drive next video source */
-#define KEY_VIDEO_PREV		242	/* drive previous video source */
-#define KEY_BRIGHTNESS_CYCLE	243	/* brightness up, after max is min */
-#define KEY_BRIGHTNESS_ZERO	244	/* brightness off, use ambient */
-#define KEY_DISPLAY_OFF		245	/* display device to off state */
-
-#define KEY_WIMAX		246
-#define KEY_RFKILL		247	/* Key that controls all radios */
-
-#define KEY_MICMUTE		248	/* Mute / unmute the microphone */
-
-/* Code 255 is reserved for special needs of AT keyboard driver */
-
-#define BTN_MISC		0x100
-#define BTN_0			0x100
-#define BTN_1			0x101
-#define BTN_2			0x102
-#define BTN_3			0x103
-#define BTN_4			0x104
-#define BTN_5			0x105
-#define BTN_6			0x106
-#define BTN_7			0x107
-#define BTN_8			0x108
-#define BTN_9			0x109
-
-#define BTN_MOUSE		0x110
-#define BTN_LEFT		0x110
-#define BTN_RIGHT		0x111
-#define BTN_MIDDLE		0x112
-#define BTN_SIDE		0x113
-#define BTN_EXTRA		0x114
-#define BTN_FORWARD		0x115
-#define BTN_BACK		0x116
-#define BTN_TASK		0x117
-
-#define BTN_JOYSTICK		0x120
-#define BTN_TRIGGER		0x120
-#define BTN_THUMB		0x121
-#define BTN_THUMB2		0x122
-#define BTN_TOP			0x123
-#define BTN_TOP2		0x124
-#define BTN_PINKIE		0x125
-#define BTN_BASE		0x126
-#define BTN_BASE2		0x127
-#define BTN_BASE3		0x128
-#define BTN_BASE4		0x129
-#define BTN_BASE5		0x12a
-#define BTN_BASE6		0x12b
-#define BTN_DEAD		0x12f
-
-#define BTN_GAMEPAD		0x130
-#define BTN_A			0x130
-#define BTN_B			0x131
-#define BTN_C			0x132
-#define BTN_X			0x133
-#define BTN_Y			0x134
-#define BTN_Z			0x135
-#define BTN_TL			0x136
-#define BTN_TR			0x137
-#define BTN_TL2			0x138
-#define BTN_TR2			0x139
-#define BTN_SELECT		0x13a
-#define BTN_START		0x13b
-#define BTN_MODE		0x13c
-#define BTN_THUMBL		0x13d
-#define BTN_THUMBR		0x13e
-
-#define BTN_DIGI		0x140
-#define BTN_TOOL_PEN		0x140
-#define BTN_TOOL_RUBBER		0x141
-#define BTN_TOOL_BRUSH		0x142
-#define BTN_TOOL_PENCIL		0x143
-#define BTN_TOOL_AIRBRUSH	0x144
-#define BTN_TOOL_FINGER		0x145
-#define BTN_TOOL_MOUSE		0x146
-#define BTN_TOOL_LENS		0x147
-#define BTN_TOOL_QUINTTAP	0x148	/* Five fingers on trackpad */
-#define BTN_TOUCH		0x14a
-#define BTN_STYLUS		0x14b
-#define BTN_STYLUS2		0x14c
-#define BTN_TOOL_DOUBLETAP	0x14d
-#define BTN_TOOL_TRIPLETAP	0x14e
-#define BTN_TOOL_QUADTAP	0x14f	/* Four fingers on trackpad */
-
-#define BTN_WHEEL		0x150
-#define BTN_GEAR_DOWN		0x150
-#define BTN_GEAR_UP		0x151
-
-#define KEY_OK			0x160
-#define KEY_SELECT		0x161
-#define KEY_GOTO		0x162
-#define KEY_CLEAR		0x163
-#define KEY_POWER2		0x164
-#define KEY_OPTION		0x165
-#define KEY_INFO		0x166	/* AL OEM Features/Tips/Tutorial */
-#define KEY_TIME		0x167
-#define KEY_VENDOR		0x168
-#define KEY_ARCHIVE		0x169
-#define KEY_PROGRAM		0x16a	/* Media Select Program Guide */
-#define KEY_CHANNEL		0x16b
-#define KEY_FAVORITES		0x16c
-#define KEY_EPG			0x16d
-#define KEY_PVR			0x16e	/* Media Select Home */
-#define KEY_MHP			0x16f
-#define KEY_LANGUAGE		0x170
-#define KEY_TITLE		0x171
-#define KEY_SUBTITLE		0x172
-#define KEY_ANGLE		0x173
-#define KEY_ZOOM		0x174
-#define KEY_MODE		0x175
-#define KEY_KEYBOARD		0x176
-#define KEY_SCREEN		0x177
-#define KEY_PC			0x178	/* Media Select Computer */
-#define KEY_TV			0x179	/* Media Select TV */
-#define KEY_TV2			0x17a	/* Media Select Cable */
-#define KEY_VCR			0x17b	/* Media Select VCR */
-#define KEY_VCR2		0x17c	/* VCR Plus */
-#define KEY_SAT			0x17d	/* Media Select Satellite */
-#define KEY_SAT2		0x17e
-#define KEY_CD			0x17f	/* Media Select CD */
-#define KEY_TAPE		0x180	/* Media Select Tape */
-#define KEY_RADIO		0x181
-#define KEY_TUNER		0x182	/* Media Select Tuner */
-#define KEY_PLAYER		0x183
-#define KEY_TEXT		0x184
-#define KEY_DVD			0x185	/* Media Select DVD */
-#define KEY_AUX			0x186
-#define KEY_MP3			0x187
-#define KEY_AUDIO		0x188	/* AL Audio Browser */
-#define KEY_VIDEO		0x189	/* AL Movie Browser */
-#define KEY_DIRECTORY		0x18a
-#define KEY_LIST		0x18b
-#define KEY_MEMO		0x18c	/* Media Select Messages */
-#define KEY_CALENDAR		0x18d
-#define KEY_RED			0x18e
-#define KEY_GREEN		0x18f
-#define KEY_YELLOW		0x190
-#define KEY_BLUE		0x191
-#define KEY_CHANNELUP		0x192	/* Channel Increment */
-#define KEY_CHANNELDOWN		0x193	/* Channel Decrement */
-#define KEY_FIRST		0x194
-#define KEY_LAST		0x195	/* Recall Last */
-#define KEY_AB			0x196
-#define KEY_NEXT		0x197
-#define KEY_RESTART		0x198
-#define KEY_SLOW		0x199
-#define KEY_SHUFFLE		0x19a
-#define KEY_BREAK		0x19b
-#define KEY_PREVIOUS		0x19c
-#define KEY_DIGITS		0x19d
-#define KEY_TEEN		0x19e
-#define KEY_TWEN		0x19f
-#define KEY_VIDEOPHONE		0x1a0	/* Media Select Video Phone */
-#define KEY_GAMES		0x1a1	/* Media Select Games */
-#define KEY_ZOOMIN		0x1a2	/* AC Zoom In */
-#define KEY_ZOOMOUT		0x1a3	/* AC Zoom Out */
-#define KEY_ZOOMRESET		0x1a4	/* AC Zoom */
-#define KEY_WORDPROCESSOR	0x1a5	/* AL Word Processor */
-#define KEY_EDITOR		0x1a6	/* AL Text Editor */
-#define KEY_SPREADSHEET		0x1a7	/* AL Spreadsheet */
-#define KEY_GRAPHICSEDITOR	0x1a8	/* AL Graphics Editor */
-#define KEY_PRESENTATION	0x1a9	/* AL Presentation App */
-#define KEY_DATABASE		0x1aa	/* AL Database App */
-#define KEY_NEWS		0x1ab	/* AL Newsreader */
-#define KEY_VOICEMAIL		0x1ac	/* AL Voicemail */
-#define KEY_ADDRESSBOOK		0x1ad	/* AL Contacts/Address Book */
-#define KEY_MESSENGER		0x1ae	/* AL Instant Messaging */
-#define KEY_DISPLAYTOGGLE	0x1af	/* Turn display (LCD) on and off */
-#define KEY_SPELLCHECK		0x1b0   /* AL Spell Check */
-#define KEY_LOGOFF		0x1b1   /* AL Logoff */
-
-#define KEY_DOLLAR		0x1b2
-#define KEY_EURO		0x1b3
-
-#define KEY_FRAMEBACK		0x1b4	/* Consumer - transport controls */
-#define KEY_FRAMEFORWARD	0x1b5
-#define KEY_CONTEXT_MENU	0x1b6	/* GenDesc - system context menu */
-#define KEY_MEDIA_REPEAT	0x1b7	/* Consumer - transport control */
-#define KEY_10CHANNELSUP	0x1b8	/* 10 channels up (10+) */
-#define KEY_10CHANNELSDOWN	0x1b9	/* 10 channels down (10-) */
-#define KEY_IMAGES		0x1ba	/* AL Image Browser */
-
-#define KEY_DEL_EOL		0x1c0
-#define KEY_DEL_EOS		0x1c1
-#define KEY_INS_LINE		0x1c2
-#define KEY_DEL_LINE		0x1c3
-
-#define KEY_FN			0x1d0
-#define KEY_FN_ESC		0x1d1
-#define KEY_FN_F1		0x1d2
-#define KEY_FN_F2		0x1d3
-#define KEY_FN_F3		0x1d4
-#define KEY_FN_F4		0x1d5
-#define KEY_FN_F5		0x1d6
-#define KEY_FN_F6		0x1d7
-#define KEY_FN_F7		0x1d8
-#define KEY_FN_F8		0x1d9
-#define KEY_FN_F9		0x1da
-#define KEY_FN_F10		0x1db
-#define KEY_FN_F11		0x1dc
-#define KEY_FN_F12		0x1dd
-#define KEY_FN_1		0x1de
-#define KEY_FN_2		0x1df
-#define KEY_FN_D		0x1e0
-#define KEY_FN_E		0x1e1
-#define KEY_FN_F		0x1e2
-#define KEY_FN_S		0x1e3
-#define KEY_FN_B		0x1e4
-
-#define KEY_BRL_DOT1		0x1f1
-#define KEY_BRL_DOT2		0x1f2
-#define KEY_BRL_DOT3		0x1f3
-#define KEY_BRL_DOT4		0x1f4
-#define KEY_BRL_DOT5		0x1f5
-#define KEY_BRL_DOT6		0x1f6
-#define KEY_BRL_DOT7		0x1f7
-#define KEY_BRL_DOT8		0x1f8
-#define KEY_BRL_DOT9		0x1f9
-#define KEY_BRL_DOT10		0x1fa
-
-#define KEY_NUMERIC_0		0x200	/* used by phones, remote controls, */
-#define KEY_NUMERIC_1		0x201	/* and other keypads */
-#define KEY_NUMERIC_2		0x202
-#define KEY_NUMERIC_3		0x203
-#define KEY_NUMERIC_4		0x204
-#define KEY_NUMERIC_5		0x205
-#define KEY_NUMERIC_6		0x206
-#define KEY_NUMERIC_7		0x207
-#define KEY_NUMERIC_8		0x208
-#define KEY_NUMERIC_9		0x209
-#define KEY_NUMERIC_STAR	0x20a
-#define KEY_NUMERIC_POUND	0x20b
-
-#define KEY_CAMERA_FOCUS	0x210
-#define KEY_WPS_BUTTON		0x211	/* WiFi Protected Setup key */
-
-#define KEY_TOUCHPAD_TOGGLE	0x212	/* Request switch touchpad on or off */
-#define KEY_TOUCHPAD_ON		0x213
-#define KEY_TOUCHPAD_OFF	0x214
-
-#define KEY_CAMERA_ZOOMIN	0x215
-#define KEY_CAMERA_ZOOMOUT	0x216
-#define KEY_CAMERA_UP		0x217
-#define KEY_CAMERA_DOWN		0x218
-#define KEY_CAMERA_LEFT		0x219
-#define KEY_CAMERA_RIGHT	0x21a
-
-#define BTN_TRIGGER_HAPPY		0x2c0
-#define BTN_TRIGGER_HAPPY1		0x2c0
-#define BTN_TRIGGER_HAPPY2		0x2c1
-#define BTN_TRIGGER_HAPPY3		0x2c2
-#define BTN_TRIGGER_HAPPY4		0x2c3
-#define BTN_TRIGGER_HAPPY5		0x2c4
-#define BTN_TRIGGER_HAPPY6		0x2c5
-#define BTN_TRIGGER_HAPPY7		0x2c6
-#define BTN_TRIGGER_HAPPY8		0x2c7
-#define BTN_TRIGGER_HAPPY9		0x2c8
-#define BTN_TRIGGER_HAPPY10		0x2c9
-#define BTN_TRIGGER_HAPPY11		0x2ca
-#define BTN_TRIGGER_HAPPY12		0x2cb
-#define BTN_TRIGGER_HAPPY13		0x2cc
-#define BTN_TRIGGER_HAPPY14		0x2cd
-#define BTN_TRIGGER_HAPPY15		0x2ce
-#define BTN_TRIGGER_HAPPY16		0x2cf
-#define BTN_TRIGGER_HAPPY17		0x2d0
-#define BTN_TRIGGER_HAPPY18		0x2d1
-#define BTN_TRIGGER_HAPPY19		0x2d2
-#define BTN_TRIGGER_HAPPY20		0x2d3
-#define BTN_TRIGGER_HAPPY21		0x2d4
-#define BTN_TRIGGER_HAPPY22		0x2d5
-#define BTN_TRIGGER_HAPPY23		0x2d6
-#define BTN_TRIGGER_HAPPY24		0x2d7
-#define BTN_TRIGGER_HAPPY25		0x2d8
-#define BTN_TRIGGER_HAPPY26		0x2d9
-#define BTN_TRIGGER_HAPPY27		0x2da
-#define BTN_TRIGGER_HAPPY28		0x2db
-#define BTN_TRIGGER_HAPPY29		0x2dc
-#define BTN_TRIGGER_HAPPY30		0x2dd
-#define BTN_TRIGGER_HAPPY31		0x2de
-#define BTN_TRIGGER_HAPPY32		0x2df
-#define BTN_TRIGGER_HAPPY33		0x2e0
-#define BTN_TRIGGER_HAPPY34		0x2e1
-#define BTN_TRIGGER_HAPPY35		0x2e2
-#define BTN_TRIGGER_HAPPY36		0x2e3
-#define BTN_TRIGGER_HAPPY37		0x2e4
-#define BTN_TRIGGER_HAPPY38		0x2e5
-#define BTN_TRIGGER_HAPPY39		0x2e6
-#define BTN_TRIGGER_HAPPY40		0x2e7
-
-/* We avoid low common keys in module aliases so they don't get huge. */
-#define KEY_MIN_INTERESTING	KEY_MUTE
-#define KEY_MAX			0x2ff
-#define KEY_CNT			(KEY_MAX+1)
-
-/*
- * Relative axes
- */
-
-#define REL_X			0x00
-#define REL_Y			0x01
-#define REL_Z			0x02
-#define REL_RX			0x03
-#define REL_RY			0x04
-#define REL_RZ			0x05
-#define REL_HWHEEL		0x06
-#define REL_DIAL		0x07
-#define REL_WHEEL		0x08
-#define REL_MISC		0x09
-#define REL_MAX			0x0f
-#define REL_CNT			(REL_MAX+1)
-
-/*
- * Absolute axes
- */
-
-#define ABS_X			0x00
-#define ABS_Y			0x01
-#define ABS_Z			0x02
-#define ABS_RX			0x03
-#define ABS_RY			0x04
-#define ABS_RZ			0x05
-#define ABS_THROTTLE		0x06
-#define ABS_RUDDER		0x07
-#define ABS_WHEEL		0x08
-#define ABS_GAS			0x09
-#define ABS_BRAKE		0x0a
-#define ABS_HAT0X		0x10
-#define ABS_HAT0Y		0x11
-#define ABS_HAT1X		0x12
-#define ABS_HAT1Y		0x13
-#define ABS_HAT2X		0x14
-#define ABS_HAT2Y		0x15
-#define ABS_HAT3X		0x16
-#define ABS_HAT3Y		0x17
-#define ABS_PRESSURE		0x18
-#define ABS_DISTANCE		0x19
-#define ABS_TILT_X		0x1a
-#define ABS_TILT_Y		0x1b
-#define ABS_TOOL_WIDTH		0x1c
-
-#define ABS_VOLUME		0x20
-
-#define ABS_MISC		0x28
-
-#define ABS_MT_SLOT		0x2f	/* MT slot being modified */
-#define ABS_MT_TOUCH_MAJOR	0x30	/* Major axis of touching ellipse */
-#define ABS_MT_TOUCH_MINOR	0x31	/* Minor axis (omit if circular) */
-#define ABS_MT_WIDTH_MAJOR	0x32	/* Major axis of approaching ellipse */
-#define ABS_MT_WIDTH_MINOR	0x33	/* Minor axis (omit if circular) */
-#define ABS_MT_ORIENTATION	0x34	/* Ellipse orientation */
-#define ABS_MT_POSITION_X	0x35	/* Center X ellipse position */
-#define ABS_MT_POSITION_Y	0x36	/* Center Y ellipse position */
-#define ABS_MT_TOOL_TYPE	0x37	/* Type of touching device */
-#define ABS_MT_BLOB_ID		0x38	/* Group a set of packets as a blob */
-#define ABS_MT_TRACKING_ID	0x39	/* Unique ID of initiated contact */
-#define ABS_MT_PRESSURE		0x3a	/* Pressure on contact area */
-#define ABS_MT_DISTANCE		0x3b	/* Contact hover distance */
-
-#ifdef __KERNEL__
-/* Implementation details, userspace should not care about these */
-#define ABS_MT_FIRST		ABS_MT_TOUCH_MAJOR
-#define ABS_MT_LAST		ABS_MT_DISTANCE
-#endif
-
-#define ABS_MAX			0x3f
-#define ABS_CNT			(ABS_MAX+1)
-
-/*
- * Switch events
- */
-
-#define SW_LID			0x00  /* set = lid shut */
-#define SW_TABLET_MODE		0x01  /* set = tablet mode */
-#define SW_HEADPHONE_INSERT	0x02  /* set = inserted */
-#define SW_RFKILL_ALL		0x03  /* rfkill master switch, type "any"
-					 set = radio enabled */
-#define SW_RADIO		SW_RFKILL_ALL	/* deprecated */
-#define SW_MICROPHONE_INSERT	0x04  /* set = inserted */
-#define SW_DOCK			0x05  /* set = plugged into dock */
-#define SW_LINEOUT_INSERT	0x06  /* set = inserted */
-#define SW_JACK_PHYSICAL_INSERT 0x07  /* set = mechanical switch set */
-#define SW_VIDEOOUT_INSERT	0x08  /* set = inserted */
-#define SW_CAMERA_LENS_COVER	0x09  /* set = lens covered */
-#define SW_KEYPAD_SLIDE		0x0a  /* set = keypad slide out */
-#define SW_FRONT_PROXIMITY	0x0b  /* set = front proximity sensor active */
-#define SW_ROTATE_LOCK		0x0c  /* set = rotate locked/disabled */
-#define SW_LINEIN_INSERT	0x0d  /* set = inserted */
-#define SW_MAX			0x0f
-#define SW_CNT			(SW_MAX+1)
-
-/*
- * Misc events
- */
-
-#define MSC_SERIAL		0x00
-#define MSC_PULSELED		0x01
-#define MSC_GESTURE		0x02
-#define MSC_RAW			0x03
-#define MSC_SCAN		0x04
-#define MSC_MAX			0x07
-#define MSC_CNT			(MSC_MAX+1)
-
-/*
- * LEDs
- */
-
-#define LED_NUML		0x00
-#define LED_CAPSL		0x01
-#define LED_SCROLLL		0x02
-#define LED_COMPOSE		0x03
-#define LED_KANA		0x04
-#define LED_SLEEP		0x05
-#define LED_SUSPEND		0x06
-#define LED_MUTE		0x07
-#define LED_MISC		0x08
-#define LED_MAIL		0x09
-#define LED_CHARGING		0x0a
-#define LED_MAX			0x0f
-#define LED_CNT			(LED_MAX+1)
-
-/*
- * Autorepeat values
- */
-
-#define REP_DELAY		0x00
-#define REP_PERIOD		0x01
-#define REP_MAX			0x01
-#define REP_CNT			(REP_MAX+1)
-
-/*
- * Sounds
- */
-
-#define SND_CLICK		0x00
-#define SND_BELL		0x01
-#define SND_TONE		0x02
-#define SND_MAX			0x07
-#define SND_CNT			(SND_MAX+1)
-
-/*
- * IDs.
- */
-
-#define ID_BUS			0
-#define ID_VENDOR		1
-#define ID_PRODUCT		2
-#define ID_VERSION		3
-
-#define BUS_PCI			0x01
-#define BUS_ISAPNP		0x02
-#define BUS_USB			0x03
-#define BUS_HIL			0x04
-#define BUS_BLUETOOTH		0x05
-#define BUS_VIRTUAL		0x06
-
-#define BUS_ISA			0x10
-#define BUS_I8042		0x11
-#define BUS_XTKBD		0x12
-#define BUS_RS232		0x13
-#define BUS_GAMEPORT		0x14
-#define BUS_PARPORT		0x15
-#define BUS_AMIGA		0x16
-#define BUS_ADB			0x17
-#define BUS_I2C			0x18
-#define BUS_HOST		0x19
-#define BUS_GSC			0x1A
-#define BUS_ATARI		0x1B
-#define BUS_SPI			0x1C
-
-/*
- * MT_TOOL types
- */
-#define MT_TOOL_FINGER		0
-#define MT_TOOL_PEN		1
-#define MT_TOOL_MAX		1
-
-/*
- * Values describing the status of a force-feedback effect
- */
-#define FF_STATUS_STOPPED	0x00
-#define FF_STATUS_PLAYING	0x01
-#define FF_STATUS_MAX		0x01
-
-/*
- * Structures used in ioctls to upload effects to a device
- * They are pieces of a bigger structure (called ff_effect)
- */
-
-/*
- * All duration values are expressed in ms. Values above 32767 ms (0x7fff)
- * should not be used and have unspecified results.
- */
-
-/**
- * struct ff_replay - defines scheduling of the force-feedback effect
- * @length: duration of the effect
- * @delay: delay before effect should start playing
- */
-struct ff_replay {
-	__u16 length;
-	__u16 delay;
-};
-
-/**
- * struct ff_trigger - defines what triggers the force-feedback effect
- * @button: number of the button triggering the effect
- * @interval: controls how soon the effect can be re-triggered
- */
-struct ff_trigger {
-	__u16 button;
-	__u16 interval;
-};
-
-/**
- * struct ff_envelope - generic force-feedback effect envelope
- * @attack_length: duration of the attack (ms)
- * @attack_level: level at the beginning of the attack
- * @fade_length: duration of fade (ms)
- * @fade_level: level at the end of fade
- *
- * The @attack_level and @fade_level are absolute values; when applying
- * envelope force-feedback core will convert to positive/negative
- * value based on polarity of the default level of the effect.
- * Valid range for the attack and fade levels is 0x0000 - 0x7fff
- */
-struct ff_envelope {
-	__u16 attack_length;
-	__u16 attack_level;
-	__u16 fade_length;
-	__u16 fade_level;
-};
-
-/**
- * struct ff_constant_effect - defines parameters of a constant force-feedback effect
- * @level: strength of the effect; may be negative
- * @envelope: envelope data
- */
-struct ff_constant_effect {
-	__s16 level;
-	struct ff_envelope envelope;
-};
-
-/**
- * struct ff_ramp_effect - defines parameters of a ramp force-feedback effect
- * @start_level: beginning strength of the effect; may be negative
- * @end_level: final strength of the effect; may be negative
- * @envelope: envelope data
- */
-struct ff_ramp_effect {
-	__s16 start_level;
-	__s16 end_level;
-	struct ff_envelope envelope;
-};
-
-/**
- * struct ff_condition_effect - defines a spring or friction force-feedback effect
- * @right_saturation: maximum level when joystick moved all way to the right
- * @left_saturation: same for the left side
- * @right_coeff: controls how fast the force grows when the joystick moves
- *	to the right
- * @left_coeff: same for the left side
- * @deadband: size of the dead zone, where no force is produced
- * @center: position of the dead zone
- */
-struct ff_condition_effect {
-	__u16 right_saturation;
-	__u16 left_saturation;
-
-	__s16 right_coeff;
-	__s16 left_coeff;
-
-	__u16 deadband;
-	__s16 center;
-};
-
-/**
- * struct ff_periodic_effect - defines parameters of a periodic force-feedback effect
- * @waveform: kind of the effect (wave)
- * @period: period of the wave (ms)
- * @magnitude: peak value
- * @offset: mean value of the wave (roughly)
- * @phase: 'horizontal' shift
- * @envelope: envelope data
- * @custom_len: number of samples (FF_CUSTOM only)
- * @custom_data: buffer of samples (FF_CUSTOM only)
- *
- * Known waveforms - FF_SQUARE, FF_TRIANGLE, FF_SINE, FF_SAW_UP,
- * FF_SAW_DOWN, FF_CUSTOM. The exact syntax FF_CUSTOM is undefined
- * for the time being as no driver supports it yet.
- *
- * Note: the data pointed by custom_data is copied by the driver.
- * You can therefore dispose of the memory after the upload/update.
- */
-struct ff_periodic_effect {
-	__u16 waveform;
-	__u16 period;
-	__s16 magnitude;
-	__s16 offset;
-	__u16 phase;
-
-	struct ff_envelope envelope;
-
-	__u32 custom_len;
-	__s16 __user *custom_data;
-};
-
-/**
- * struct ff_rumble_effect - defines parameters of a periodic force-feedback effect
- * @strong_magnitude: magnitude of the heavy motor
- * @weak_magnitude: magnitude of the light one
- *
- * Some rumble pads have two motors of different weight. Strong_magnitude
- * represents the magnitude of the vibration generated by the heavy one.
- */
-struct ff_rumble_effect {
-	__u16 strong_magnitude;
-	__u16 weak_magnitude;
-};
-
-/**
- * struct ff_effect - defines force feedback effect
- * @type: type of the effect (FF_CONSTANT, FF_PERIODIC, FF_RAMP, FF_SPRING,
- *	FF_FRICTION, FF_DAMPER, FF_RUMBLE, FF_INERTIA, or FF_CUSTOM)
- * @id: an unique id assigned to an effect
- * @direction: direction of the effect
- * @trigger: trigger conditions (struct ff_trigger)
- * @replay: scheduling of the effect (struct ff_replay)
- * @u: effect-specific structure (one of ff_constant_effect, ff_ramp_effect,
- *	ff_periodic_effect, ff_condition_effect, ff_rumble_effect) further
- *	defining effect parameters
- *
- * This structure is sent through ioctl from the application to the driver.
- * To create a new effect application should set its @id to -1; the kernel
- * will return assigned @id which can later be used to update or delete
- * this effect.
- *
- * Direction of the effect is encoded as follows:
- *	0 deg -> 0x0000 (down)
- *	90 deg -> 0x4000 (left)
- *	180 deg -> 0x8000 (up)
- *	270 deg -> 0xC000 (right)
- */
-struct ff_effect {
-	__u16 type;
-	__s16 id;
-	__u16 direction;
-	struct ff_trigger trigger;
-	struct ff_replay replay;
-
-	union {
-		struct ff_constant_effect constant;
-		struct ff_ramp_effect ramp;
-		struct ff_periodic_effect periodic;
-		struct ff_condition_effect condition[2]; /* One for each axis */
-		struct ff_rumble_effect rumble;
-	} u;
-};
-
-/*
- * Force feedback effect types
- */
-
-#define FF_RUMBLE	0x50
-#define FF_PERIODIC	0x51
-#define FF_CONSTANT	0x52
-#define FF_SPRING	0x53
-#define FF_FRICTION	0x54
-#define FF_DAMPER	0x55
-#define FF_INERTIA	0x56
-#define FF_RAMP		0x57
-
-#define FF_EFFECT_MIN	FF_RUMBLE
-#define FF_EFFECT_MAX	FF_RAMP
-
-/*
- * Force feedback periodic effect types
- */
-
-#define FF_SQUARE	0x58
-#define FF_TRIANGLE	0x59
-#define FF_SINE		0x5a
-#define FF_SAW_UP	0x5b
-#define FF_SAW_DOWN	0x5c
-#define FF_CUSTOM	0x5d
-
-#define FF_WAVEFORM_MIN	FF_SQUARE
-#define FF_WAVEFORM_MAX	FF_CUSTOM
-
-/*
- * Set ff device properties
- */
-
-#define FF_GAIN		0x60
-#define FF_AUTOCENTER	0x61
-
-#define FF_MAX		0x7f
-#define FF_CNT		(FF_MAX+1)
-
-#ifdef __KERNEL__
-
-/*
- * In-kernel definitions.
- */
-
-#include <linux/device.h>
-#include <linux/fs.h>
-#include <linux/timer.h>
-#include <linux/mod_devicetable.h>
-
-/**
- * struct input_dev - represents an input device
- * @name: name of the device
- * @phys: physical path to the device in the system hierarchy
- * @uniq: unique identification code for the device (if device has it)
- * @id: id of the device (struct input_id)
- * @propbit: bitmap of device properties and quirks
- * @evbit: bitmap of types of events supported by the device (EV_KEY,
- *	EV_REL, etc.)
- * @keybit: bitmap of keys/buttons this device has
- * @relbit: bitmap of relative axes for the device
- * @absbit: bitmap of absolute axes for the device
- * @mscbit: bitmap of miscellaneous events supported by the device
- * @ledbit: bitmap of leds present on the device
- * @sndbit: bitmap of sound effects supported by the device
- * @ffbit: bitmap of force feedback effects supported by the device
- * @swbit: bitmap of switches present on the device
- * @hint_events_per_packet: average number of events generated by the
- *	device in a packet (between EV_SYN/SYN_REPORT events). Used by
- *	event handlers to estimate size of the buffer needed to hold
- *	events.
- * @keycodemax: size of keycode table
- * @keycodesize: size of elements in keycode table
- * @keycode: map of scancodes to keycodes for this device
- * @getkeycode: optional legacy method to retrieve current keymap.
- * @setkeycode: optional method to alter current keymap, used to implement
- *	sparse keymaps. If not supplied default mechanism will be used.
- *	The method is being called while holding event_lock and thus must
- *	not sleep
- * @ff: force feedback structure associated with the device if device
- *	supports force feedback effects
- * @repeat_key: stores key code of the last key pressed; used to implement
- *	software autorepeat
- * @timer: timer for software autorepeat
- * @rep: current values for autorepeat parameters (delay, rate)
- * @mt: pointer to array of struct input_mt_slot holding current values
- *	of tracked contacts
- * @mtsize: number of MT slots the device uses
- * @slot: MT slot currently being transmitted
- * @trkid: stores MT tracking ID for the current contact
- * @absinfo: array of &struct input_absinfo elements holding information
- *	about absolute axes (current value, min, max, flat, fuzz,
- *	resolution)
- * @key: reflects current state of device's keys/buttons
- * @led: reflects current state of device's LEDs
- * @snd: reflects current state of sound effects
- * @sw: reflects current state of device's switches
- * @open: this method is called when the very first user calls
- *	input_open_device(). The driver must prepare the device
- *	to start generating events (start polling thread,
- *	request an IRQ, submit URB, etc.)
- * @close: this method is called when the very last user calls
- *	input_close_device().
- * @flush: purges the device. Most commonly used to get rid of force
- *	feedback effects loaded into the device when disconnecting
- *	from it
- * @event: event handler for events sent _to_ the device, like EV_LED
- *	or EV_SND. The device is expected to carry out the requested
- *	action (turn on a LED, play sound, etc.) The call is protected
- *	by @event_lock and must not sleep
- * @grab: input handle that currently has the device grabbed (via
- *	EVIOCGRAB ioctl). When a handle grabs a device it becomes sole
- *	recipient for all input events coming from the device
- * @event_lock: this spinlock is is taken when input core receives
- *	and processes a new event for the device (in input_event()).
- *	Code that accesses and/or modifies parameters of a device
- *	(such as keymap or absmin, absmax, absfuzz, etc.) after device
- *	has been registered with input core must take this lock.
- * @mutex: serializes calls to open(), close() and flush() methods
- * @users: stores number of users (input handlers) that opened this
- *	device. It is used by input_open_device() and input_close_device()
- *	to make sure that dev->open() is only called when the first
- *	user opens device and dev->close() is called when the very
- *	last user closes the device
- * @going_away: marks devices that are in a middle of unregistering and
- *	causes input_open_device*() fail with -ENODEV.
- * @sync: set to %true when there were no new events since last EV_SYN
- * @dev: driver model's view of this device
- * @h_list: list of input handles associated with the device. When
- *	accessing the list dev->mutex must be held
- * @node: used to place the device onto input_dev_list
- */
-struct input_dev {
-	const char *name;
-	const char *phys;
-	const char *uniq;
-	struct input_id id;
-
-	unsigned long propbit[BITS_TO_LONGS(INPUT_PROP_CNT)];
-
-	unsigned long evbit[BITS_TO_LONGS(EV_CNT)];
-	unsigned long keybit[BITS_TO_LONGS(KEY_CNT)];
-	unsigned long relbit[BITS_TO_LONGS(REL_CNT)];
-	unsigned long absbit[BITS_TO_LONGS(ABS_CNT)];
-	unsigned long mscbit[BITS_TO_LONGS(MSC_CNT)];
-	unsigned long ledbit[BITS_TO_LONGS(LED_CNT)];
-	unsigned long sndbit[BITS_TO_LONGS(SND_CNT)];
-	unsigned long ffbit[BITS_TO_LONGS(FF_CNT)];
-	unsigned long swbit[BITS_TO_LONGS(SW_CNT)];
-
-	unsigned int hint_events_per_packet;
-
-	unsigned int keycodemax;
-	unsigned int keycodesize;
-	void *keycode;
-
-	int (*setkeycode)(struct input_dev *dev,
-			  const struct input_keymap_entry *ke,
-			  unsigned int *old_keycode);
-	int (*getkeycode)(struct input_dev *dev,
-			  struct input_keymap_entry *ke);
-
-	struct ff_device *ff;
-
-	unsigned int repeat_key;
-	struct timer_list timer;
-
-	int rep[REP_CNT];
-
-	struct input_mt_slot *mt;
-	int mtsize;
-	int slot;
-	int trkid;
-
-	struct input_absinfo *absinfo;
-
-	unsigned long key[BITS_TO_LONGS(KEY_CNT)];
-	unsigned long led[BITS_TO_LONGS(LED_CNT)];
-	unsigned long snd[BITS_TO_LONGS(SND_CNT)];
-	unsigned long sw[BITS_TO_LONGS(SW_CNT)];
-
-	int (*open)(struct input_dev *dev);
-	void (*close)(struct input_dev *dev);
-	int (*flush)(struct input_dev *dev, struct file *file);
-	int (*event)(struct input_dev *dev, unsigned int type, unsigned int code, int value);
-
-	struct input_handle __rcu *grab;
-
-	spinlock_t event_lock;
-	struct mutex mutex;
-
-	unsigned int users;
-	bool going_away;
-
-	bool sync;
-
-	struct device dev;
-
-	struct list_head	h_list;
-	struct list_head	node;
-};
-#define to_input_dev(d) container_of(d, struct input_dev, dev)
-
-/*
- * Verify that we are in sync with input_device_id mod_devicetable.h #defines
- */
-
-#if EV_MAX != INPUT_DEVICE_ID_EV_MAX
-#error "EV_MAX and INPUT_DEVICE_ID_EV_MAX do not match"
-#endif
-
-#if KEY_MIN_INTERESTING != INPUT_DEVICE_ID_KEY_MIN_INTERESTING
-#error "KEY_MIN_INTERESTING and INPUT_DEVICE_ID_KEY_MIN_INTERESTING do not match"
-#endif
-
-#if KEY_MAX != INPUT_DEVICE_ID_KEY_MAX
-#error "KEY_MAX and INPUT_DEVICE_ID_KEY_MAX do not match"
-#endif
-
-#if REL_MAX != INPUT_DEVICE_ID_REL_MAX
-#error "REL_MAX and INPUT_DEVICE_ID_REL_MAX do not match"
-#endif
-
-#if ABS_MAX != INPUT_DEVICE_ID_ABS_MAX
-#error "ABS_MAX and INPUT_DEVICE_ID_ABS_MAX do not match"
-#endif
-
-#if MSC_MAX != INPUT_DEVICE_ID_MSC_MAX
-#error "MSC_MAX and INPUT_DEVICE_ID_MSC_MAX do not match"
-#endif
-
-#if LED_MAX != INPUT_DEVICE_ID_LED_MAX
-#error "LED_MAX and INPUT_DEVICE_ID_LED_MAX do not match"
-#endif
-
-#if SND_MAX != INPUT_DEVICE_ID_SND_MAX
-#error "SND_MAX and INPUT_DEVICE_ID_SND_MAX do not match"
-#endif
-
-#if FF_MAX != INPUT_DEVICE_ID_FF_MAX
-#error "FF_MAX and INPUT_DEVICE_ID_FF_MAX do not match"
-#endif
-
-#if SW_MAX != INPUT_DEVICE_ID_SW_MAX
-#error "SW_MAX and INPUT_DEVICE_ID_SW_MAX do not match"
-#endif
-
-#define INPUT_DEVICE_ID_MATCH_DEVICE \
-	(INPUT_DEVICE_ID_MATCH_BUS | INPUT_DEVICE_ID_MATCH_VENDOR | INPUT_DEVICE_ID_MATCH_PRODUCT)
-#define INPUT_DEVICE_ID_MATCH_DEVICE_AND_VERSION \
-	(INPUT_DEVICE_ID_MATCH_DEVICE | INPUT_DEVICE_ID_MATCH_VERSION)
-
-struct input_handle;
-
-/**
- * struct input_handler - implements one of interfaces for input devices
- * @private: driver-specific data
- * @event: event handler. This method is being called by input core with
- *	interrupts disabled and dev->event_lock spinlock held and so
- *	it may not sleep
- * @filter: similar to @event; separates normal event handlers from
- *	"filters".
- * @match: called after comparing device's id with handler's id_table
- *	to perform fine-grained matching between device and handler
- * @connect: called when attaching a handler to an input device
- * @disconnect: disconnects a handler from input device
- * @start: starts handler for given handle. This function is called by
- *	input core right after connect() method and also when a process
- *	that "grabbed" a device releases it
- * @fops: file operations this driver implements
- * @minor: beginning of range of 32 minors for devices this driver
- *	can provide
- * @name: name of the handler, to be shown in /proc/bus/input/handlers
- * @id_table: pointer to a table of input_device_ids this driver can
- *	handle
- * @h_list: list of input handles associated with the handler
- * @node: for placing the driver onto input_handler_list
- *
- * Input handlers attach to input devices and create input handles. There
- * are likely several handlers attached to any given input device at the
- * same time. All of them will get their copy of input event generated by
- * the device.
- *
- * The very same structure is used to implement input filters. Input core
- * allows filters to run first and will not pass event to regular handlers
- * if any of the filters indicate that the event should be filtered (by
- * returning %true from their filter() method).
- *
- * Note that input core serializes calls to connect() and disconnect()
- * methods.
- */
-struct input_handler {
-
-	void *private;
-
-	void (*event)(struct input_handle *handle, unsigned int type, unsigned int code, int value);
-	bool (*filter)(struct input_handle *handle, unsigned int type, unsigned int code, int value);
-	bool (*match)(struct input_handler *handler, struct input_dev *dev);
-	int (*connect)(struct input_handler *handler, struct input_dev *dev, const struct input_device_id *id);
-	void (*disconnect)(struct input_handle *handle);
-	void (*start)(struct input_handle *handle);
-
-	const struct file_operations *fops;
-	int minor;
-	const char *name;
-
-	const struct input_device_id *id_table;
-
-	struct list_head	h_list;
-	struct list_head	node;
-};
-
-/**
- * struct input_handle - links input device with an input handler
- * @private: handler-specific data
- * @open: counter showing whether the handle is 'open', i.e. should deliver
- *	events from its device
- * @name: name given to the handle by handler that created it
- * @dev: input device the handle is attached to
- * @handler: handler that works with the device through this handle
- * @d_node: used to put the handle on device's list of attached handles
- * @h_node: used to put the handle on handler's list of handles from which
- *	it gets events
- */
-struct input_handle {
-
-	void *private;
-
-	int open;
-	const char *name;
-
-	struct input_dev *dev;
-	struct input_handler *handler;
-
-	struct list_head	d_node;
-	struct list_head	h_node;
-};
-
-struct input_dev *input_allocate_device(void);
-void input_free_device(struct input_dev *dev);
-
-static inline struct input_dev *input_get_device(struct input_dev *dev)
-{
-	return dev ? to_input_dev(get_device(&dev->dev)) : NULL;
-}
-
-static inline void input_put_device(struct input_dev *dev)
-{
-	if (dev)
-		put_device(&dev->dev);
-}
-
-static inline void *input_get_drvdata(struct input_dev *dev)
-{
-	return dev_get_drvdata(&dev->dev);
-}
-
-static inline void input_set_drvdata(struct input_dev *dev, void *data)
-{
-	dev_set_drvdata(&dev->dev, data);
-}
-
-int __must_check input_register_device(struct input_dev *);
-void input_unregister_device(struct input_dev *);
-
-void input_reset_device(struct input_dev *);
-
-int __must_check input_register_handler(struct input_handler *);
-void input_unregister_handler(struct input_handler *);
-
-int input_handler_for_each_handle(struct input_handler *, void *data,
-				  int (*fn)(struct input_handle *, void *));
-
-int input_register_handle(struct input_handle *);
-void input_unregister_handle(struct input_handle *);
-
-int input_grab_device(struct input_handle *);
-void input_release_device(struct input_handle *);
-
-int input_open_device(struct input_handle *);
-void input_close_device(struct input_handle *);
-
-int input_flush_device(struct input_handle *handle, struct file *file);
-
-void input_event(struct input_dev *dev, unsigned int type, unsigned int code, int value);
-void input_inject_event(struct input_handle *handle, unsigned int type, unsigned int code, int value);
-
-static inline void input_report_key(struct input_dev *dev, unsigned int code, int value)
-{
-	input_event(dev, EV_KEY, code, !!value);
-}
-
-static inline void input_report_rel(struct input_dev *dev, unsigned int code, int value)
-{
-	input_event(dev, EV_REL, code, value);
-}
-
-static inline void input_report_abs(struct input_dev *dev, unsigned int code, int value)
-{
-	input_event(dev, EV_ABS, code, value);
-}
-
-static inline void input_report_ff_status(struct input_dev *dev, unsigned int code, int value)
-{
-	input_event(dev, EV_FF_STATUS, code, value);
-}
-
-static inline void input_report_switch(struct input_dev *dev, unsigned int code, int value)
-{
-	input_event(dev, EV_SW, code, !!value);
-}
-
-static inline void input_sync(struct input_dev *dev)
-{
-	input_event(dev, EV_SYN, SYN_REPORT, 0);
-}
-
-static inline void input_mt_sync(struct input_dev *dev)
-{
-	input_event(dev, EV_SYN, SYN_MT_REPORT, 0);
-}
-
-void input_set_capability(struct input_dev *dev, unsigned int type, unsigned int code);
-
-/**
- * input_set_events_per_packet - tell handlers about the driver event rate
- * @dev: the input device used by the driver
- * @n_events: the average number of events between calls to input_sync()
- *
- * If the event rate sent from a device is unusually large, use this
- * function to set the expected event rate. This will allow handlers
- * to set up an appropriate buffer size for the event stream, in order
- * to minimize information loss.
- */
-static inline void input_set_events_per_packet(struct input_dev *dev, int n_events)
-{
-	dev->hint_events_per_packet = n_events;
-}
-
-void input_alloc_absinfo(struct input_dev *dev);
-void input_set_abs_params(struct input_dev *dev, unsigned int axis,
-			  int min, int max, int fuzz, int flat);
-
-#define INPUT_GENERATE_ABS_ACCESSORS(_suffix, _item)			\
-static inline int input_abs_get_##_suffix(struct input_dev *dev,	\
-					  unsigned int axis)		\
-{									\
-	return dev->absinfo ? dev->absinfo[axis]._item : 0;		\
-}									\
-									\
-static inline void input_abs_set_##_suffix(struct input_dev *dev,	\
-					   unsigned int axis, int val)	\
-{									\
-	input_alloc_absinfo(dev);					\
-	if (dev->absinfo)						\
-		dev->absinfo[axis]._item = val;				\
-}
-
-INPUT_GENERATE_ABS_ACCESSORS(val, value)
-INPUT_GENERATE_ABS_ACCESSORS(min, minimum)
-INPUT_GENERATE_ABS_ACCESSORS(max, maximum)
-INPUT_GENERATE_ABS_ACCESSORS(fuzz, fuzz)
-INPUT_GENERATE_ABS_ACCESSORS(flat, flat)
-INPUT_GENERATE_ABS_ACCESSORS(res, resolution)
-
-int input_scancode_to_scalar(const struct input_keymap_entry *ke,
-			     unsigned int *scancode);
-
-int input_get_keycode(struct input_dev *dev, struct input_keymap_entry *ke);
-int input_set_keycode(struct input_dev *dev,
-		      const struct input_keymap_entry *ke);
-
-extern struct class input_class;
-
-/**
- * struct ff_device - force-feedback part of an input device
- * @upload: Called to upload an new effect into device
- * @erase: Called to erase an effect from device
- * @playback: Called to request device to start playing specified effect
- * @set_gain: Called to set specified gain
- * @set_autocenter: Called to auto-center device
- * @destroy: called by input core when parent input device is being
- *	destroyed
- * @private: driver-specific data, will be freed automatically
- * @ffbit: bitmap of force feedback capabilities truly supported by
- *	device (not emulated like ones in input_dev->ffbit)
- * @mutex: mutex for serializing access to the device
- * @max_effects: maximum number of effects supported by device
- * @effects: pointer to an array of effects currently loaded into device
- * @effect_owners: array of effect owners; when file handle owning
- *	an effect gets closed the effect is automatically erased
- *
- * Every force-feedback device must implement upload() and playback()
- * methods; erase() is optional. set_gain() and set_autocenter() need
- * only be implemented if driver sets up FF_GAIN and FF_AUTOCENTER
- * bits.
- *
- * Note that playback(), set_gain() and set_autocenter() are called with
- * dev->event_lock spinlock held and interrupts off and thus may not
- * sleep.
- */
-struct ff_device {
-	int (*upload)(struct input_dev *dev, struct ff_effect *effect,
-		      struct ff_effect *old);
-	int (*erase)(struct input_dev *dev, int effect_id);
-
-	int (*playback)(struct input_dev *dev, int effect_id, int value);
-	void (*set_gain)(struct input_dev *dev, u16 gain);
-	void (*set_autocenter)(struct input_dev *dev, u16 magnitude);
-
-	void (*destroy)(struct ff_device *);
-
-	void *private;
-
-	unsigned long ffbit[BITS_TO_LONGS(FF_CNT)];
-
-	struct mutex mutex;
-
-	int max_effects;
-	struct ff_effect *effects;
-	struct file *effect_owners[];
-};
-
-int input_ff_create(struct input_dev *dev, unsigned int max_effects);
-void input_ff_destroy(struct input_dev *dev);
-
-int input_ff_event(struct input_dev *dev, unsigned int type, unsigned int code, int value);
-
-int input_ff_upload(struct input_dev *dev, struct ff_effect *effect, struct file *file);
-int input_ff_erase(struct input_dev *dev, int effect_id, struct file *file);
-
-int input_ff_create_memless(struct input_dev *dev, void *data,
-		int (*play_effect)(struct input_dev *, void *, struct ff_effect *));
-
-#endif
-#endif
diff --git a/ANDROID_3.4.5/include/linux/input/ad714x.h b/ANDROID_3.4.5/include/linux/input/ad714x.h
deleted file mode 100644
index d388d857..00000000
--- a/ANDROID_3.4.5/include/linux/input/ad714x.h
+++ /dev/null
@@ -1,64 +0,0 @@
-/*
- * include/linux/input/ad714x.h
- *
- * AD714x is very flexible, it can be used as buttons, scrollwheel,
- * slider, touchpad at the same time. That depends on the boards.
- * The platform_data for the device's "struct device" holds this
- * information.
- *
- * Copyright 2009-2011 Analog Devices Inc.
- *
- * Licensed under the GPL-2 or later.
- */
-
-#ifndef __LINUX_INPUT_AD714X_H__
-#define __LINUX_INPUT_AD714X_H__
-
-#define STAGE_NUM              12
-#define STAGE_CFGREG_NUM       8
-#define SYS_CFGREG_NUM         8
-
-/* board information which need be initialized in arch/mach... */
-struct ad714x_slider_plat {
-	int start_stage;
-	int end_stage;
-	int max_coord;
-};
-
-struct ad714x_wheel_plat {
-	int start_stage;
-	int end_stage;
-	int max_coord;
-};
-
-struct ad714x_touchpad_plat {
-	int x_start_stage;
-	int x_end_stage;
-	int x_max_coord;
-
-	int y_start_stage;
-	int y_end_stage;
-	int y_max_coord;
-};
-
-struct ad714x_button_plat {
-	int keycode;
-	unsigned short l_mask;
-	unsigned short h_mask;
-};
-
-struct ad714x_platform_data {
-	int slider_num;
-	int wheel_num;
-	int touchpad_num;
-	int button_num;
-	struct ad714x_slider_plat *slider;
-	struct ad714x_wheel_plat *wheel;
-	struct ad714x_touchpad_plat *touchpad;
-	struct ad714x_button_plat *button;
-	unsigned short stage_cfg_reg[STAGE_NUM][STAGE_CFGREG_NUM];
-	unsigned short sys_cfg_reg[SYS_CFGREG_NUM];
-	unsigned long irqflags;
-};
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/input/adp5589.h b/ANDROID_3.4.5/include/linux/input/adp5589.h
deleted file mode 100644
index 1a05eee1..00000000
--- a/ANDROID_3.4.5/include/linux/input/adp5589.h
+++ /dev/null
@@ -1,188 +0,0 @@
-/*
- * Analog Devices ADP5589/ADP5585 I/O Expander and QWERTY Keypad Controller
- *
- * Copyright 2010-2011 Analog Devices Inc.
- *
- * Licensed under the GPL-2.
- */
-
-#ifndef _ADP5589_H
-#define _ADP5589_H
-
-/*
- * ADP5589 specific GPI and Keymap defines
- */
-
-#define ADP5589_KEYMAPSIZE	88
-
-#define ADP5589_GPI_PIN_ROW0 97
-#define ADP5589_GPI_PIN_ROW1 98
-#define ADP5589_GPI_PIN_ROW2 99
-#define ADP5589_GPI_PIN_ROW3 100
-#define ADP5589_GPI_PIN_ROW4 101
-#define ADP5589_GPI_PIN_ROW5 102
-#define ADP5589_GPI_PIN_ROW6 103
-#define ADP5589_GPI_PIN_ROW7 104
-#define ADP5589_GPI_PIN_COL0 105
-#define ADP5589_GPI_PIN_COL1 106
-#define ADP5589_GPI_PIN_COL2 107
-#define ADP5589_GPI_PIN_COL3 108
-#define ADP5589_GPI_PIN_COL4 109
-#define ADP5589_GPI_PIN_COL5 110
-#define ADP5589_GPI_PIN_COL6 111
-#define ADP5589_GPI_PIN_COL7 112
-#define ADP5589_GPI_PIN_COL8 113
-#define ADP5589_GPI_PIN_COL9 114
-#define ADP5589_GPI_PIN_COL10 115
-#define GPI_LOGIC1 116
-#define GPI_LOGIC2 117
-
-#define ADP5589_GPI_PIN_ROW_BASE ADP5589_GPI_PIN_ROW0
-#define ADP5589_GPI_PIN_ROW_END ADP5589_GPI_PIN_ROW7
-#define ADP5589_GPI_PIN_COL_BASE ADP5589_GPI_PIN_COL0
-#define ADP5589_GPI_PIN_COL_END ADP5589_GPI_PIN_COL10
-
-#define ADP5589_GPI_PIN_BASE ADP5589_GPI_PIN_ROW_BASE
-#define ADP5589_GPI_PIN_END ADP5589_GPI_PIN_COL_END
-
-#define ADP5589_GPIMAPSIZE_MAX (ADP5589_GPI_PIN_END - ADP5589_GPI_PIN_BASE + 1)
-
-/*
- * ADP5585 specific GPI and Keymap defines
- */
-
-#define ADP5585_KEYMAPSIZE	30
-
-#define ADP5585_GPI_PIN_ROW0 37
-#define ADP5585_GPI_PIN_ROW1 38
-#define ADP5585_GPI_PIN_ROW2 39
-#define ADP5585_GPI_PIN_ROW3 40
-#define ADP5585_GPI_PIN_ROW4 41
-#define ADP5585_GPI_PIN_ROW5 42
-#define ADP5585_GPI_PIN_COL0 43
-#define ADP5585_GPI_PIN_COL1 44
-#define ADP5585_GPI_PIN_COL2 45
-#define ADP5585_GPI_PIN_COL3 46
-#define ADP5585_GPI_PIN_COL4 47
-#define GPI_LOGIC 48
-
-#define ADP5585_GPI_PIN_ROW_BASE ADP5585_GPI_PIN_ROW0
-#define ADP5585_GPI_PIN_ROW_END ADP5585_GPI_PIN_ROW5
-#define ADP5585_GPI_PIN_COL_BASE ADP5585_GPI_PIN_COL0
-#define ADP5585_GPI_PIN_COL_END ADP5585_GPI_PIN_COL4
-
-#define ADP5585_GPI_PIN_BASE ADP5585_GPI_PIN_ROW_BASE
-#define ADP5585_GPI_PIN_END ADP5585_GPI_PIN_COL_END
-
-#define ADP5585_GPIMAPSIZE_MAX (ADP5585_GPI_PIN_END - ADP5585_GPI_PIN_BASE + 1)
-
-struct adp5589_gpi_map {
-	unsigned short pin;
-	unsigned short sw_evt;
-};
-
-/* scan_cycle_time */
-#define ADP5589_SCAN_CYCLE_10ms		0
-#define ADP5589_SCAN_CYCLE_20ms		1
-#define ADP5589_SCAN_CYCLE_30ms		2
-#define ADP5589_SCAN_CYCLE_40ms		3
-
-/* RESET_CFG */
-#define RESET_PULSE_WIDTH_500us		0
-#define RESET_PULSE_WIDTH_1ms		1
-#define RESET_PULSE_WIDTH_2ms		2
-#define RESET_PULSE_WIDTH_10ms		3
-
-#define RESET_TRIG_TIME_0ms		(0 << 2)
-#define RESET_TRIG_TIME_1000ms		(1 << 2)
-#define RESET_TRIG_TIME_1500ms		(2 << 2)
-#define RESET_TRIG_TIME_2000ms		(3 << 2)
-#define RESET_TRIG_TIME_2500ms		(4 << 2)
-#define RESET_TRIG_TIME_3000ms		(5 << 2)
-#define RESET_TRIG_TIME_3500ms		(6 << 2)
-#define RESET_TRIG_TIME_4000ms		(7 << 2)
-
-#define RESET_PASSTHRU_EN		(1 << 5)
-#define RESET1_POL_HIGH			(1 << 6)
-#define RESET1_POL_LOW			(0 << 6)
-#define RESET2_POL_HIGH			(1 << 7)
-#define RESET2_POL_LOW			(0 << 7)
-
-/* ADP5589 Mask Bits:
- * C C C C C C C C C C C | R R R R R R R R
- * 1 9 8 7 6 5 4 3 2 1 0 | 7 6 5 4 3 2 1 0
- * 0
- * ---------------- BIT ------------------
- * 1 1 1 1 1 1 1 1 1 0 0 | 0 0 0 0 0 0 0 0
- * 8 7 6 5 4 3 2 1 0 9 8 | 7 6 5 4 3 2 1 0
- */
-
-#define ADP_ROW(x)	(1 << (x))
-#define ADP_COL(x)	(1 << (x + 8))
-#define ADP5589_ROW_MASK		0xFF
-#define ADP5589_COL_MASK		0xFF
-#define ADP5589_COL_SHIFT		8
-#define ADP5589_MAX_ROW_NUM		7
-#define ADP5589_MAX_COL_NUM		10
-
-/* ADP5585 Mask Bits:
- * C C C C C | R R R R R R
- * 4 3 2 1 0 | 5 4 3 2 1 0
- *
- * ---- BIT -- -----------
- * 1 0 0 0 0 | 0 0 0 0 0 0
- * 0 9 8 7 6 | 5 4 3 2 1 0
- */
-
-#define ADP5585_ROW_MASK		0x3F
-#define ADP5585_COL_MASK		0x1F
-#define ADP5585_ROW_SHIFT		0
-#define ADP5585_COL_SHIFT		6
-#define ADP5585_MAX_ROW_NUM		5
-#define ADP5585_MAX_COL_NUM		4
-
-#define ADP5585_ROW(x)	(1 << ((x) & ADP5585_ROW_MASK))
-#define ADP5585_COL(x)	(1 << (((x) & ADP5585_COL_MASK) + ADP5585_COL_SHIFT))
-
-/* Put one of these structures in i2c_board_info platform_data */
-
-struct adp5589_kpad_platform_data {
-	unsigned keypad_en_mask;	/* Keypad (Rows/Columns) enable mask */
-	const unsigned short *keymap;	/* Pointer to keymap */
-	unsigned short keymapsize;	/* Keymap size */
-	bool repeat;			/* Enable key repeat */
-	bool en_keylock;		/* Enable key lock feature (ADP5589 only)*/
-	unsigned char unlock_key1;	/* Unlock Key 1 (ADP5589 only) */
-	unsigned char unlock_key2;	/* Unlock Key 2 (ADP5589 only) */
-	unsigned char unlock_timer;	/* Time in seconds [0..7] between the two unlock keys 0=disable (ADP5589 only) */
-	unsigned char scan_cycle_time;	/* Time between consecutive scan cycles */
-	unsigned char reset_cfg;	/* Reset config */
-	unsigned short reset1_key_1;	/* Reset Key 1 */
-	unsigned short reset1_key_2;	/* Reset Key 2 */
-	unsigned short reset1_key_3;	/* Reset Key 3 */
-	unsigned short reset2_key_1;	/* Reset Key 1 */
-	unsigned short reset2_key_2;	/* Reset Key 2 */
-	unsigned debounce_dis_mask;	/* Disable debounce mask */
-	unsigned pull_dis_mask;		/* Disable all pull resistors mask */
-	unsigned pullup_en_100k;	/* Pull-Up 100k Enable Mask */
-	unsigned pullup_en_300k;	/* Pull-Up 300k Enable Mask */
-	unsigned pulldown_en_300k;	/* Pull-Down 300k Enable Mask */
-	const struct adp5589_gpi_map *gpimap;
-	unsigned short gpimapsize;
-	const struct adp5589_gpio_platform_data *gpio_data;
-};
-
-struct i2c_client; /* forward declaration */
-
-struct adp5589_gpio_platform_data {
-	int	gpio_start;	/* GPIO Chip base # */
-	int	(*setup)(struct i2c_client *client,
-				int gpio, unsigned ngpio,
-				void *context);
-	int	(*teardown)(struct i2c_client *client,
-				int gpio, unsigned ngpio,
-				void *context);
-	void	*context;
-};
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/input/adxl34x.h b/ANDROID_3.4.5/include/linux/input/adxl34x.h
deleted file mode 100644
index 57e01a7c..00000000
--- a/ANDROID_3.4.5/include/linux/input/adxl34x.h
+++ /dev/null
@@ -1,356 +0,0 @@
-/*
- * include/linux/input/adxl34x.h
- *
- * Digital Accelerometer characteristics are highly application specific
- * and may vary between boards and models. The platform_data for the
- * device's "struct device" holds this information.
- *
- * Copyright 2009 Analog Devices Inc.
- *
- * Licensed under the GPL-2 or later.
- */
-
-#ifndef __LINUX_INPUT_ADXL34X_H__
-#define __LINUX_INPUT_ADXL34X_H__
-
-struct adxl34x_platform_data {
-
-	/*
-	 * X,Y,Z Axis Offset:
-	 * offer user offset adjustments in twoscompliment
-	 * form with a scale factor of 15.6 mg/LSB (i.e. 0x7F = +2 g)
-	 */
-
-	s8 x_axis_offset;
-	s8 y_axis_offset;
-	s8 z_axis_offset;
-
-	/*
-	 * TAP_X/Y/Z Enable: Setting TAP_X, Y, or Z Enable enables X,
-	 * Y, or Z participation in Tap detection. A '0' excludes the
-	 * selected axis from participation in Tap detection.
-	 * Setting the SUPPRESS bit suppresses Double Tap detection if
-	 * acceleration greater than tap_threshold is present during the
-	 * tap_latency period, i.e. after the first tap but before the
-	 * opening of the second tap window.
-	 */
-
-#define ADXL_SUPPRESS	(1 << 3)
-#define ADXL_TAP_X_EN	(1 << 2)
-#define ADXL_TAP_Y_EN	(1 << 1)
-#define ADXL_TAP_Z_EN	(1 << 0)
-
-	u8 tap_axis_control;
-
-	/*
-	 * tap_threshold:
-	 * holds the threshold value for tap detection/interrupts.
-	 * The data format is unsigned. The scale factor is 62.5 mg/LSB
-	 * (i.e. 0xFF = +16 g). A zero value may result in undesirable
-	 * behavior if Tap/Double Tap is enabled.
-	 */
-
-	u8 tap_threshold;
-
-	/*
-	 * tap_duration:
-	 * is an unsigned time value representing the maximum
-	 * time that an event must be above the tap_threshold threshold
-	 * to qualify as a tap event. The scale factor is 625 us/LSB. A zero
-	 * value will prevent Tap/Double Tap functions from working.
-	 */
-
-	u8 tap_duration;
-
-	/*
-	 * tap_latency:
-	 * is an unsigned time value representing the wait time
-	 * from the detection of a tap event to the opening of the time
-	 * window tap_window for a possible second tap event. The scale
-	 * factor is 1.25 ms/LSB. A zero value will disable the Double Tap
-	 * function.
-	 */
-
-	u8 tap_latency;
-
-	/*
-	 * tap_window:
-	 * is an unsigned time value representing the amount
-	 * of time after the expiration of tap_latency during which a second
-	 * tap can begin. The scale factor is 1.25 ms/LSB. A zero value will
-	 * disable the Double Tap function.
-	 */
-
-	u8 tap_window;
-
-	/*
-	 * act_axis_control:
-	 * X/Y/Z Enable: A '1' enables X, Y, or Z participation in activity
-	 * or inactivity detection. A '0' excludes the selected axis from
-	 * participation. If all of the axes are excluded, the function is
-	 * disabled.
-	 * AC/DC: A '0' = DC coupled operation and a '1' = AC coupled
-	 * operation. In DC coupled operation, the current acceleration is
-	 * compared with activity_threshold and inactivity_threshold directly
-	 * to determine whether activity or inactivity is detected. In AC
-	 * coupled operation for activity detection, the acceleration value
-	 * at the start of activity detection is taken as a reference value.
-	 * New samples of acceleration are then compared to this
-	 * reference value and if the magnitude of the difference exceeds
-	 * activity_threshold the device will trigger an activity interrupt. In
-	 * AC coupled operation for inactivity detection, a reference value
-	 * is used again for comparison and is updated whenever the
-	 * device exceeds the inactivity threshold. Once the reference
-	 * value is selected, the device compares the magnitude of the
-	 * difference between the reference value and the current
-	 * acceleration with inactivity_threshold. If the difference is below
-	 * inactivity_threshold for a total of inactivity_time, the device is
-	 * considered inactive and the inactivity interrupt is triggered.
-	 */
-
-#define ADXL_ACT_ACDC		(1 << 7)
-#define ADXL_ACT_X_EN		(1 << 6)
-#define ADXL_ACT_Y_EN		(1 << 5)
-#define ADXL_ACT_Z_EN		(1 << 4)
-#define ADXL_INACT_ACDC		(1 << 3)
-#define ADXL_INACT_X_EN		(1 << 2)
-#define ADXL_INACT_Y_EN		(1 << 1)
-#define ADXL_INACT_Z_EN		(1 << 0)
-
-	u8 act_axis_control;
-
-	/*
-	 * activity_threshold:
-	 * holds the threshold value for activity detection.
-	 * The data format is unsigned. The scale factor is
-	 * 62.5 mg/LSB. A zero value may result in undesirable behavior if
-	 * Activity interrupt is enabled.
-	 */
-
-	u8 activity_threshold;
-
-	/*
-	 * inactivity_threshold:
-	 * holds the threshold value for inactivity
-	 * detection. The data format is unsigned. The scale
-	 * factor is 62.5 mg/LSB. A zero value may result in undesirable
-	 * behavior if Inactivity interrupt is enabled.
-	 */
-
-	u8 inactivity_threshold;
-
-	/*
-	 * inactivity_time:
-	 * is an unsigned time value representing the
-	 * amount of time that acceleration must be below the value in
-	 * inactivity_threshold for inactivity to be declared. The scale factor
-	 * is 1 second/LSB. Unlike the other interrupt functions, which
-	 * operate on unfiltered data, the inactivity function operates on the
-	 * filtered output data. At least one output sample must be
-	 * generated for the inactivity interrupt to be triggered. This will
-	 * result in the function appearing un-responsive if the
-	 * inactivity_time register is set with a value less than the time
-	 * constant of the Output Data Rate. A zero value will result in an
-	 * interrupt when the output data is below inactivity_threshold.
-	 */
-
-	u8 inactivity_time;
-
-	/*
-	 * free_fall_threshold:
-	 * holds the threshold value for Free-Fall detection.
-	 * The data format is unsigned. The root-sum-square(RSS) value
-	 * of all axes is calculated and compared to the value in
-	 * free_fall_threshold to determine if a free fall event may be
-	 * occurring.  The scale factor is 62.5 mg/LSB. A zero value may
-	 * result in undesirable behavior if Free-Fall interrupt is
-	 * enabled. Values between 300 and 600 mg (0x05 to 0x09) are
-	 * recommended.
-	 */
-
-	u8 free_fall_threshold;
-
-	/*
-	 * free_fall_time:
-	 * is an unsigned time value representing the minimum
-	 * time that the RSS value of all axes must be less than
-	 * free_fall_threshold to generate a Free-Fall interrupt. The
-	 * scale factor is 5 ms/LSB. A zero value may result in
-	 * undesirable behavior if Free-Fall interrupt is enabled.
-	 * Values between 100 to 350 ms (0x14 to 0x46) are recommended.
-	 */
-
-	u8 free_fall_time;
-
-	/*
-	 * data_rate:
-	 * Selects device bandwidth and output data rate.
-	 * RATE = 3200 Hz / (2^(15 - x)). Default value is 0x0A, or 100 Hz
-	 * Output Data Rate. An Output Data Rate should be selected that
-	 * is appropriate for the communication protocol and frequency
-	 * selected. Selecting too high of an Output Data Rate with a low
-	 * communication speed will result in samples being discarded.
-	 */
-
-	u8 data_rate;
-
-	/*
-	 * data_range:
-	 * FULL_RES: When this bit is set with the device is
-	 * in Full-Resolution Mode, where the output resolution increases
-	 * with RANGE to maintain a 4 mg/LSB scale factor. When this
-	 * bit is cleared the device is in 10-bit Mode and RANGE determine the
-	 * maximum g-Range and scale factor.
-	 */
-
-#define ADXL_FULL_RES		(1 << 3)
-#define ADXL_RANGE_PM_2g	0
-#define ADXL_RANGE_PM_4g	1
-#define ADXL_RANGE_PM_8g	2
-#define ADXL_RANGE_PM_16g	3
-
-	u8 data_range;
-
-	/*
-	 * low_power_mode:
-	 * A '0' = Normal operation and a '1' = Reduced
-	 * power operation with somewhat higher noise.
-	 */
-
-	u8 low_power_mode;
-
-	/*
-	 * power_mode:
-	 * LINK: A '1' with both the activity and inactivity functions
-	 * enabled will delay the start of the activity function until
-	 * inactivity is detected. Once activity is detected, inactivity
-	 * detection will begin and prevent the detection of activity. This
-	 * bit serially links the activity and inactivity functions. When '0'
-	 * the inactivity and activity functions are concurrent. Additional
-	 * information can be found in the ADXL34x datasheet's Application
-	 * section under Link Mode.
-	 * AUTO_SLEEP: A '1' sets the ADXL34x to switch to Sleep Mode
-	 * when inactivity (acceleration has been below inactivity_threshold
-	 * for at least inactivity_time) is detected and the LINK bit is set.
-	 * A '0' disables automatic switching to Sleep Mode. See the
-	 * Sleep Bit section of the ADXL34x datasheet for more information.
-	 */
-
-#define ADXL_LINK	(1 << 5)
-#define ADXL_AUTO_SLEEP	(1 << 4)
-
-	u8 power_mode;
-
-	/*
-	 * fifo_mode:
-	 * BYPASS The FIFO is bypassed
-	 * FIFO   FIFO collects up to 32 values then stops collecting data
-	 * STREAM FIFO holds the last 32 data values. Once full, the FIFO's
-	 *        oldest data is lost as it is replaced with newer data
-	 *
-	 * DEFAULT should be ADXL_FIFO_STREAM
-	 */
-
-#define ADXL_FIFO_BYPASS	0
-#define ADXL_FIFO_FIFO		1
-#define ADXL_FIFO_STREAM	2
-
-	u8 fifo_mode;
-
-	/*
-	 * watermark:
-	 * The Watermark feature can be used to reduce the interrupt load
-	 * of the system. The FIFO fills up to the value stored in watermark
-	 * [1..32] and then generates an interrupt.
-	 * A '0' disables the watermark feature.
-	 */
-
-	u8 watermark;
-
-	/*
-	 * When acceleration measurements are received from the ADXL34x
-	 * events are sent to the event subsystem. The following settings
-	 * select the event type and event code for new x, y and z axis data
-	 * respectively.
-	 */
-	u32 ev_type;	/* EV_ABS or EV_REL */
-
-	u32 ev_code_x;	/* ABS_X,Y,Z or REL_X,Y,Z */
-	u32 ev_code_y;	/* ABS_X,Y,Z or REL_X,Y,Z */
-	u32 ev_code_z;	/* ABS_X,Y,Z or REL_X,Y,Z */
-
-	/*
-	 * A valid BTN or KEY Code; use tap_axis_control to disable
-	 * event reporting
-	 */
-
-	u32 ev_code_tap[3];	/* EV_KEY {X-Axis, Y-Axis, Z-Axis} */
-
-	/*
-	 * A valid BTN or KEY Code for Free-Fall or Activity enables
-	 * input event reporting. A '0' disables the Free-Fall or
-	 * Activity reporting.
-	 */
-
-	u32 ev_code_ff;	/* EV_KEY */
-	u32 ev_code_act_inactivity;	/* EV_KEY */
-
-	/*
-	 * Use ADXL34x INT2 pin instead of INT1 pin for interrupt output
-	 */
-	u8 use_int2;
-
-	/*
-	 * ADXL346 only ORIENTATION SENSING feature
-	 * The orientation function of the ADXL346 reports both 2-D and
-	 * 3-D orientation concurrently.
-	 */
-
-#define ADXL_EN_ORIENTATION_2D		1
-#define ADXL_EN_ORIENTATION_3D		2
-#define ADXL_EN_ORIENTATION_2D_3D	3
-
-	u8 orientation_enable;
-
-	/*
-	 * The width of the deadzone region between two or more
-	 * orientation positions is determined by setting the Deadzone
-	 * value. The deadzone region size can be specified with a
-	 * resolution of 3.6deg. The deadzone angle represents the total
-	 * angle where the orientation is considered invalid.
-	 */
-
-#define ADXL_DEADZONE_ANGLE_0p0		0	/* !!!0.0 [deg] */
-#define ADXL_DEADZONE_ANGLE_3p6		1	/* 3.6 [deg] */
-#define ADXL_DEADZONE_ANGLE_7p2		2	/* 7.2 [deg] */
-#define ADXL_DEADZONE_ANGLE_10p8	3	/* 10.8 [deg] */
-#define ADXL_DEADZONE_ANGLE_14p4	4	/* 14.4 [deg] */
-#define ADXL_DEADZONE_ANGLE_18p0	5	/* 18.0 [deg] */
-#define ADXL_DEADZONE_ANGLE_21p6	6	/* 21.6 [deg] */
-#define ADXL_DEADZONE_ANGLE_25p2	7	/* 25.2 [deg] */
-
-	u8 deadzone_angle;
-
-	/*
-	 * To eliminate most human motion such as walking or shaking,
-	 * a Divisor value should be selected to effectively limit the
-	 * orientation bandwidth. Set the depth of the filter used to
-	 * low-pass filter the measured acceleration for stable
-	 * orientation sensing
-	 */
-
-#define ADXL_LP_FILTER_DIVISOR_2	0
-#define ADXL_LP_FILTER_DIVISOR_4	1
-#define ADXL_LP_FILTER_DIVISOR_8	2
-#define ADXL_LP_FILTER_DIVISOR_16	3
-#define ADXL_LP_FILTER_DIVISOR_32	4
-#define ADXL_LP_FILTER_DIVISOR_64	5
-#define ADXL_LP_FILTER_DIVISOR_128	6
-#define ADXL_LP_FILTER_DIVISOR_256	7
-
-	u8 divisor_length;
-
-	u32 ev_codes_orient_2d[4];	/* EV_KEY {+X, -X, +Y, -Y} */
-	u32 ev_codes_orient_3d[6];	/* EV_KEY {+Z, +Y, +X, -X, -Y, -Z} */
-};
-#endif
diff --git a/ANDROID_3.4.5/include/linux/input/as5011.h b/ANDROID_3.4.5/include/linux/input/as5011.h
deleted file mode 100644
index 1affd0dd..00000000
--- a/ANDROID_3.4.5/include/linux/input/as5011.h
+++ /dev/null
@@ -1,20 +0,0 @@
-#ifndef _AS5011_H
-#define _AS5011_H
-
-/*
- * Copyright (c) 2010, 2011 Fabien Marteau <fabien.marteau@armadeus.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-
-struct as5011_platform_data {
-	unsigned int button_gpio;
-	unsigned int axis_irq; /* irq number */
-	unsigned long axis_irqflags;
-	char xp, xn; /* threshold for x axis */
-	char yp, yn; /* threshold for y axis */
-};
-
-#endif /* _AS5011_H */
diff --git a/ANDROID_3.4.5/include/linux/input/auo-pixcir-ts.h b/ANDROID_3.4.5/include/linux/input/auo-pixcir-ts.h
deleted file mode 100644
index 75d4be71..00000000
--- a/ANDROID_3.4.5/include/linux/input/auo-pixcir-ts.h
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- * Driver for AUO in-cell touchscreens
- *
- * Copyright (c) 2011 Heiko Stuebner <heiko@sntech.de>
- *
- * based on auo_touch.h from Dell Streak kernel
- *
- * Copyright (c) 2008 QUALCOMM Incorporated.
- * Copyright (c) 2008 QUALCOMM USA, INC.
- *
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __AUO_PIXCIR_TS_H__
-#define __AUO_PIXCIR_TS_H__
-
-/*
- * Interrupt modes:
- * periodical:		interrupt is asserted periodicaly
- * compare coordinates:	interrupt is asserted when coordinates change
- * indicate touch:	interrupt is asserted during touch
- */
-#define AUO_PIXCIR_INT_PERIODICAL	0x00
-#define AUO_PIXCIR_INT_COMP_COORD	0x01
-#define AUO_PIXCIR_INT_TOUCH_IND	0x02
-
-/*
- * @gpio_int		interrupt gpio
- * @int_setting		one of AUO_PIXCIR_INT_*
- * @init_hw		hardwarespecific init
- * @exit_hw		hardwarespecific shutdown
- * @x_max		x-resolution
- * @y_max		y-resolution
- */
-struct auo_pixcir_ts_platdata {
-	int gpio_int;
-
-	int int_setting;
-
-	void (*init_hw)(struct i2c_client *);
-	void (*exit_hw)(struct i2c_client *);
-
-	unsigned int x_max;
-	unsigned int y_max;
-};
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/input/bu21013.h b/ANDROID_3.4.5/include/linux/input/bu21013.h
deleted file mode 100644
index 05e03284..00000000
--- a/ANDROID_3.4.5/include/linux/input/bu21013.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- * Author: Naveen Kumar G <naveen.gaddipati@stericsson.com> for ST-Ericsson
- * License terms:GNU General Public License (GPL) version 2
- */
-
-#ifndef _BU21013_H
-#define _BU21013_H
-
-/**
- * struct bu21013_platform_device - Handle the platform data
- * @cs_en:	pointer to the cs enable function
- * @cs_dis:	pointer to the cs disable function
- * @irq_read_val:    pointer to read the pen irq value function
- * @touch_x_max: touch x max
- * @touch_y_max: touch y max
- * @cs_pin: chip select pin
- * @irq: irq pin
- * @ext_clk: external clock flag
- * @x_flip: x flip flag
- * @y_flip: y flip flag
- * @wakeup: wakeup flag
- *
- * This is used to handle the platform data
- */
-struct bu21013_platform_device {
-	int (*cs_en)(int reset_pin);
-	int (*cs_dis)(int reset_pin);
-	int (*irq_read_val)(void);
-	int touch_x_max;
-	int touch_y_max;
-	unsigned int cs_pin;
-	unsigned int irq;
-	bool ext_clk;
-	bool x_flip;
-	bool y_flip;
-	bool wakeup;
-};
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/input/cma3000.h b/ANDROID_3.4.5/include/linux/input/cma3000.h
deleted file mode 100644
index cbbaac27..00000000
--- a/ANDROID_3.4.5/include/linux/input/cma3000.h
+++ /dev/null
@@ -1,59 +0,0 @@
-/*
- * VTI CMA3000_Dxx Accelerometer driver
- *
- * Copyright (C) 2010 Texas Instruments
- * Author: Hemanth V <hemanthv@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#ifndef _LINUX_CMA3000_H
-#define _LINUX_CMA3000_H
-
-#define CMAMODE_DEFAULT    0
-#define CMAMODE_MEAS100    1
-#define CMAMODE_MEAS400    2
-#define CMAMODE_MEAS40     3
-#define CMAMODE_MOTDET     4
-#define CMAMODE_FF100      5
-#define CMAMODE_FF400      6
-#define CMAMODE_POFF       7
-
-#define CMARANGE_2G   2000
-#define CMARANGE_8G   8000
-
-/**
- * struct cma3000_i2c_platform_data - CMA3000 Platform data
- * @fuzz_x: Noise on X Axis
- * @fuzz_y: Noise on Y Axis
- * @fuzz_z: Noise on Z Axis
- * @g_range: G range in milli g i.e 2000 or 8000
- * @mode: Operating mode
- * @mdthr: Motion detect threshold value
- * @mdfftmr: Motion detect and free fall time value
- * @ffthr: Free fall threshold value
- */
-
-struct cma3000_platform_data {
-	int fuzz_x;
-	int fuzz_y;
-	int fuzz_z;
-	int g_range;
-	uint8_t mode;
-	uint8_t mdthr;
-	uint8_t mdfftmr;
-	uint8_t ffthr;
-	unsigned long irqflags;
-};
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/input/cy8ctmg110_pdata.h b/ANDROID_3.4.5/include/linux/input/cy8ctmg110_pdata.h
deleted file mode 100644
index 09522cb5..00000000
--- a/ANDROID_3.4.5/include/linux/input/cy8ctmg110_pdata.h
+++ /dev/null
@@ -1,10 +0,0 @@
-#ifndef _LINUX_CY8CTMG110_PDATA_H
-#define _LINUX_CY8CTMG110_PDATA_H
-
-struct cy8ctmg110_pdata
-{
-	int reset_pin;		/* Reset pin is wired to this GPIO (optional) */
-	int irq_pin;		/* IRQ pin is wired to this GPIO */
-};
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/input/cyttsp.h b/ANDROID_3.4.5/include/linux/input/cyttsp.h
deleted file mode 100644
index 5af7c66f..00000000
--- a/ANDROID_3.4.5/include/linux/input/cyttsp.h
+++ /dev/null
@@ -1,58 +0,0 @@
-/*
- * Header file for:
- * Cypress TrueTouch(TM) Standard Product (TTSP) touchscreen drivers.
- * For use with Cypress Txx3xx parts.
- * Supported parts include:
- * CY8CTST341
- * CY8CTMA340
- *
- * Copyright (C) 2009, 2010, 2011 Cypress Semiconductor, Inc.
- * Copyright (C) 2012 Javier Martinez Canillas <javier@dowhile0.org>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2, and only version 2, as published by the
- * Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
- *
- * Contact Cypress Semiconductor at www.cypress.com (kev@cypress.com)
- *
- */
-#ifndef _CYTTSP_H_
-#define _CYTTSP_H_
-
-#define CY_SPI_NAME "cyttsp-spi"
-#define CY_I2C_NAME "cyttsp-i2c"
-/* Active Power state scanning/processing refresh interval */
-#define CY_ACT_INTRVL_DFLT 0x00 /* ms */
-/* touch timeout for the Active power */
-#define CY_TCH_TMOUT_DFLT 0xFF /* ms */
-/* Low Power state scanning/processing refresh interval */
-#define CY_LP_INTRVL_DFLT 0x0A /* ms */
-/* Active distance in pixels for a gesture to be reported */
-#define CY_ACT_DIST_DFLT 0xF8 /* pixels */
-
-struct cyttsp_platform_data {
-	u32 maxx;
-	u32 maxy;
-	bool use_hndshk;
-	u8 act_dist;	/* Active distance */
-	u8 act_intrvl;  /* Active refresh interval; ms */
-	u8 tch_tmout;   /* Active touch timeout; ms */
-	u8 lp_intrvl;   /* Low power refresh interval; ms */
-	int (*init)(void);
-	void (*exit)(void);
-	char *name;
-	s16 irq_gpio;
-	u8 *bl_keys;
-};
-
-#endif /* _CYTTSP_H_ */
diff --git a/ANDROID_3.4.5/include/linux/input/eeti_ts.h b/ANDROID_3.4.5/include/linux/input/eeti_ts.h
deleted file mode 100644
index f875b316..00000000
--- a/ANDROID_3.4.5/include/linux/input/eeti_ts.h
+++ /dev/null
@@ -1,9 +0,0 @@
-#ifndef LINUX_INPUT_EETI_TS_H
-#define LINUX_INPUT_EETI_TS_H
-
-struct eeti_ts_platform_data {
-	unsigned int irq_active_high;
-};
-
-#endif /* LINUX_INPUT_EETI_TS_H */
-
diff --git a/ANDROID_3.4.5/include/linux/input/gp2ap002a00f.h b/ANDROID_3.4.5/include/linux/input/gp2ap002a00f.h
deleted file mode 100644
index aad2fd44..00000000
--- a/ANDROID_3.4.5/include/linux/input/gp2ap002a00f.h
+++ /dev/null
@@ -1,22 +0,0 @@
-#ifndef _GP2AP002A00F_H_
-#define _GP2AP002A00F_H_
-
-#include <linux/i2c.h>
-
-#define GP2A_I2C_NAME "gp2ap002a00f"
-
-/**
- * struct gp2a_platform_data - Sharp gp2ap002a00f proximity platform data
- * @vout_gpio: The gpio connected to the object detected pin (VOUT)
- * @wakeup: Set to true if the proximity can wake the device from suspend
- * @hw_setup: Callback for setting up hardware such as gpios and vregs
- * @hw_shutdown: Callback for properly shutting down hardware
- */
-struct gp2a_platform_data {
-	int vout_gpio;
-	bool wakeup;
-	int (*hw_setup)(struct i2c_client *client);
-	int (*hw_shutdown)(struct i2c_client *client);
-};
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/input/gpio_tilt.h b/ANDROID_3.4.5/include/linux/input/gpio_tilt.h
deleted file mode 100644
index c1cc52d3..00000000
--- a/ANDROID_3.4.5/include/linux/input/gpio_tilt.h
+++ /dev/null
@@ -1,73 +0,0 @@
-#ifndef _INPUT_GPIO_TILT_H
-#define _INPUT_GPIO_TILT_H
-
-/**
- * struct gpio_tilt_axis - Axis used by the tilt switch
- * @axis:		Constant describing the axis, e.g. ABS_X
- * @min:		minimum value for abs_param
- * @max:		maximum value for abs_param
- * @fuzz:		fuzz value for abs_param
- * @flat:		flat value for abs_param
- */
-struct gpio_tilt_axis {
-	int axis;
-	int min;
-	int max;
-	int fuzz;
-	int flat;
-};
-
-/**
- * struct gpio_tilt_state - state description
- * @gpios:		bitfield of gpio target-states for the value
- * @axes:		array containing the axes settings for the gpio state
- *			The array indizes must correspond to the axes defined
- *			in platform_data
- *
- * This structure describes a supported axis settings
- * and the necessary gpio-state which represent it.
- *
- * The n-th bit in the bitfield describes the state of the n-th GPIO
- * from the gpios-array defined in gpio_regulator_config below.
- */
-struct gpio_tilt_state {
-	int gpios;
-	int *axes;
-};
-
-/**
- * struct gpio_tilt_platform_data
- * @gpios:		Array containing the gpios determining the tilt state
- * @nr_gpios:		Number of gpios
- * @axes:		Array of gpio_tilt_axis descriptions
- * @nr_axes:		Number of axes
- * @states:		Array of gpio_tilt_state entries describing
- *			the gpio state for specific tilts
- * @nr_states:		Number of states available
- * @debounce_interval:	debounce ticks interval in msecs
- * @poll_interval:	polling interval in msecs - for polling driver only
- * @enable:		callback to enable the tilt switch
- * @disable:		callback to disable the tilt switch
- *
- * This structure contains gpio-tilt-switch configuration
- * information that must be passed by platform code to the
- * gpio-tilt input driver.
- */
-struct gpio_tilt_platform_data {
-	struct gpio *gpios;
-	int nr_gpios;
-
-	struct gpio_tilt_axis *axes;
-	int nr_axes;
-
-	struct gpio_tilt_state *states;
-	int nr_states;
-
-	int debounce_interval;
-
-	unsigned int poll_interval;
-	int (*enable)(struct device *dev);
-	void (*disable)(struct device *dev);
-};
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/input/ili210x.h b/ANDROID_3.4.5/include/linux/input/ili210x.h
deleted file mode 100644
index a5471245..00000000
--- a/ANDROID_3.4.5/include/linux/input/ili210x.h
+++ /dev/null
@@ -1,10 +0,0 @@
-#ifndef _ILI210X_H
-#define _ILI210X_H
-
-struct ili210x_platform_data {
-	unsigned long irq_flags;
-	unsigned int poll_period;
-	bool (*get_pendown_state)(void);
-};
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/input/kxtj9.h b/ANDROID_3.4.5/include/linux/input/kxtj9.h
deleted file mode 100644
index d415579b..00000000
--- a/ANDROID_3.4.5/include/linux/input/kxtj9.h
+++ /dev/null
@@ -1,61 +0,0 @@
-/*
- * Copyright (C) 2011 Kionix, Inc.
- * Written by Chris Hudson <chudson@kionix.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
- * 02111-1307, USA
- */
-
-#ifndef __KXTJ9_H__
-#define __KXTJ9_H__
-
-#define KXTJ9_I2C_ADDR		0x0F
-
-struct kxtj9_platform_data {
-	unsigned int min_interval;	/* minimum poll interval (in milli-seconds) */
-	unsigned int init_interval;	/* initial poll interval (in milli-seconds) */
-
-	/*
-	 * By default, x is axis 0, y is axis 1, z is axis 2; these can be
-	 * changed to account for sensor orientation within the host device.
-	 */
-	u8 axis_map_x;
-	u8 axis_map_y;
-	u8 axis_map_z;
-
-	/*
-	 * Each axis can be negated to account for sensor orientation within
-	 * the host device.
-	 */
-	bool negate_x;
-	bool negate_y;
-	bool negate_z;
-
-	/* CTRL_REG1: set resolution, g-range, data ready enable */
-	/* Output resolution: 8-bit valid or 12-bit valid */
-	#define RES_8BIT		0
-	#define RES_12BIT		(1 << 6)
-	u8 res_12bit;
-	/* Output g-range: +/-2g, 4g, or 8g */
-	#define KXTJ9_G_2G		0
-	#define KXTJ9_G_4G		(1 << 3)
-	#define KXTJ9_G_8G		(1 << 4)
-	u8 g_range;
-
-	int (*init)(void);
-	void (*exit)(void);
-	int (*power_on)(void);
-	int (*power_off)(void);
-};
-#endif  /* __KXTJ9_H__ */
diff --git a/ANDROID_3.4.5/include/linux/input/matrix_keypad.h b/ANDROID_3.4.5/include/linux/input/matrix_keypad.h
deleted file mode 100644
index 6c07ced0..00000000
--- a/ANDROID_3.4.5/include/linux/input/matrix_keypad.h
+++ /dev/null
@@ -1,128 +0,0 @@
-#ifndef _MATRIX_KEYPAD_H
-#define _MATRIX_KEYPAD_H
-
-#include <linux/types.h>
-#include <linux/input.h>
-#include <linux/of.h>
-
-#define MATRIX_MAX_ROWS		32
-#define MATRIX_MAX_COLS		32
-
-#define KEY(row, col, val)	((((row) & (MATRIX_MAX_ROWS - 1)) << 24) |\
-				 (((col) & (MATRIX_MAX_COLS - 1)) << 16) |\
-				 ((val) & 0xffff))
-
-#define KEY_ROW(k)		(((k) >> 24) & 0xff)
-#define KEY_COL(k)		(((k) >> 16) & 0xff)
-#define KEY_VAL(k)		((k) & 0xffff)
-
-#define MATRIX_SCAN_CODE(row, col, row_shift)	(((row) << (row_shift)) + (col))
-
-/**
- * struct matrix_keymap_data - keymap for matrix keyboards
- * @keymap: pointer to array of uint32 values encoded with KEY() macro
- *	representing keymap
- * @keymap_size: number of entries (initialized) in this keymap
- *
- * This structure is supposed to be used by platform code to supply
- * keymaps to drivers that implement matrix-like keypads/keyboards.
- */
-struct matrix_keymap_data {
-	const uint32_t *keymap;
-	unsigned int	keymap_size;
-};
-
-/**
- * struct matrix_keypad_platform_data - platform-dependent keypad data
- * @keymap_data: pointer to &matrix_keymap_data
- * @row_gpios: pointer to array of gpio numbers representing rows
- * @col_gpios: pointer to array of gpio numbers reporesenting colums
- * @num_row_gpios: actual number of row gpios used by device
- * @num_col_gpios: actual number of col gpios used by device
- * @col_scan_delay_us: delay, measured in microseconds, that is
- *	needed before we can keypad after activating column gpio
- * @debounce_ms: debounce interval in milliseconds
- * @clustered_irq: may be specified if interrupts of all row/column GPIOs
- *	are bundled to one single irq
- * @clustered_irq_flags: flags that are needed for the clustered irq
- * @active_low: gpio polarity
- * @wakeup: controls whether the device should be set up as wakeup
- *	source
- * @no_autorepeat: disable key autorepeat
- *
- * This structure represents platform-specific data that use used by
- * matrix_keypad driver to perform proper initialization.
- */
-struct matrix_keypad_platform_data {
-	const struct matrix_keymap_data *keymap_data;
-
-	const unsigned int *row_gpios;
-	const unsigned int *col_gpios;
-
-	unsigned int	num_row_gpios;
-	unsigned int	num_col_gpios;
-
-	unsigned int	col_scan_delay_us;
-
-	/* key debounce interval in milli-second */
-	unsigned int	debounce_ms;
-
-	unsigned int	clustered_irq;
-	unsigned int	clustered_irq_flags;
-
-	bool		active_low;
-	bool		wakeup;
-	bool		no_autorepeat;
-};
-
-/**
- * matrix_keypad_build_keymap - convert platform keymap into matrix keymap
- * @keymap_data: keymap supplied by the platform code
- * @row_shift: number of bits to shift row value by to advance to the next
- * line in the keymap
- * @keymap: expanded version of keymap that is suitable for use by
- * matrix keyboad driver
- * @keybit: pointer to bitmap of keys supported by input device
- *
- * This function converts platform keymap (encoded with KEY() macro) into
- * an array of keycodes that is suitable for using in a standard matrix
- * keyboard driver that uses row and col as indices.
- */
-static inline void
-matrix_keypad_build_keymap(const struct matrix_keymap_data *keymap_data,
-			   unsigned int row_shift,
-			   unsigned short *keymap, unsigned long *keybit)
-{
-	int i;
-
-	for (i = 0; i < keymap_data->keymap_size; i++) {
-		unsigned int key = keymap_data->keymap[i];
-		unsigned int row = KEY_ROW(key);
-		unsigned int col = KEY_COL(key);
-		unsigned short code = KEY_VAL(key);
-
-		keymap[MATRIX_SCAN_CODE(row, col, row_shift)] = code;
-		__set_bit(code, keybit);
-	}
-	__clear_bit(KEY_RESERVED, keybit);
-}
-
-#ifdef CONFIG_INPUT_OF_MATRIX_KEYMAP
-struct matrix_keymap_data *
-matrix_keyboard_of_fill_keymap(struct device_node *np, const char *propname);
-
-void matrix_keyboard_of_free_keymap(const struct matrix_keymap_data *kd);
-#else
-static inline struct matrix_keymap_data *
-matrix_keyboard_of_fill_keymap(struct device_node *np, const char *propname)
-{
-	return NULL;
-}
-
-static inline void
-matrix_keyboard_of_free_keymap(const struct matrix_keymap_data *kd)
-{
-}
-#endif
-
-#endif /* _MATRIX_KEYPAD_H */
diff --git a/ANDROID_3.4.5/include/linux/input/mt.h b/ANDROID_3.4.5/include/linux/input/mt.h
deleted file mode 100644
index f8673758..00000000
--- a/ANDROID_3.4.5/include/linux/input/mt.h
+++ /dev/null
@@ -1,67 +0,0 @@
-#ifndef _INPUT_MT_H
-#define _INPUT_MT_H
-
-/*
- * Input Multitouch Library
- *
- * Copyright (c) 2010 Henrik Rydberg
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-
-#include <linux/input.h>
-
-#define TRKID_MAX	0xffff
-
-/**
- * struct input_mt_slot - represents the state of an input MT slot
- * @abs: holds current values of ABS_MT axes for this slot
- */
-struct input_mt_slot {
-	int abs[ABS_MT_LAST - ABS_MT_FIRST + 1];
-};
-
-static inline void input_mt_set_value(struct input_mt_slot *slot,
-				      unsigned code, int value)
-{
-	slot->abs[code - ABS_MT_FIRST] = value;
-}
-
-static inline int input_mt_get_value(const struct input_mt_slot *slot,
-				     unsigned code)
-{
-	return slot->abs[code - ABS_MT_FIRST];
-}
-
-int input_mt_init_slots(struct input_dev *dev, unsigned int num_slots);
-void input_mt_destroy_slots(struct input_dev *dev);
-
-static inline int input_mt_new_trkid(struct input_dev *dev)
-{
-	return dev->trkid++ & TRKID_MAX;
-}
-
-static inline void input_mt_slot(struct input_dev *dev, int slot)
-{
-	input_event(dev, EV_ABS, ABS_MT_SLOT, slot);
-}
-
-static inline bool input_is_mt_value(int axis)
-{
-	return axis >= ABS_MT_FIRST && axis <= ABS_MT_LAST;
-}
-
-static inline bool input_is_mt_axis(int axis)
-{
-	return axis == ABS_MT_SLOT || input_is_mt_value(axis);
-}
-
-void input_mt_report_slot_state(struct input_dev *dev,
-				unsigned int tool_type, bool active);
-
-void input_mt_report_finger_count(struct input_dev *dev, int count);
-void input_mt_report_pointer_emulation(struct input_dev *dev, bool use_count);
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/input/pixcir_ts.h b/ANDROID_3.4.5/include/linux/input/pixcir_ts.h
deleted file mode 100644
index 7163d91c..00000000
--- a/ANDROID_3.4.5/include/linux/input/pixcir_ts.h
+++ /dev/null
@@ -1,10 +0,0 @@
-#ifndef	_PIXCIR_I2C_TS_H
-#define	_PIXCIR_I2C_TS_H
-
-struct pixcir_ts_platform_data {
-	int (*attb_read_val)(void);
-	int x_max;
-	int y_max;
-};
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/input/pmic8xxx-keypad.h b/ANDROID_3.4.5/include/linux/input/pmic8xxx-keypad.h
deleted file mode 100644
index 5f1e2f9a..00000000
--- a/ANDROID_3.4.5/include/linux/input/pmic8xxx-keypad.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/* Copyright (c) 2011, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#ifndef __PMIC8XXX_KEYPAD_H__
-#define __PMIC8XXX_KEYPAD_H__
-
-#include <linux/input/matrix_keypad.h>
-
-#define PM8XXX_KEYPAD_DEV_NAME     "pm8xxx-keypad"
-
-/**
- * struct pm8xxx_keypad_platform_data - platform data for keypad
- * @keymap_data - matrix keymap data
- * @input_name - input device name
- * @input_phys_device - input device name
- * @num_cols - number of columns of keypad
- * @num_rows - number of row of keypad
- * @debounce_ms - debounce period in milliseconds
- * @scan_delay_ms - scan delay in milliseconds
- * @row_hold_ns - row hold period in nanoseconds
- * @wakeup - configure keypad as wakeup
- * @rep - enable or disable key repeat bit
- */
-struct pm8xxx_keypad_platform_data {
-	const struct matrix_keymap_data *keymap_data;
-
-	const char *input_name;
-	const char *input_phys_device;
-
-	unsigned int num_cols;
-	unsigned int num_rows;
-	unsigned int rows_gpio_start;
-	unsigned int cols_gpio_start;
-
-	unsigned int debounce_ms;
-	unsigned int scan_delay_ms;
-	unsigned int row_hold_ns;
-
-	bool wakeup;
-	bool rep;
-};
-
-#endif /*__PMIC8XXX_KEYPAD_H__ */
diff --git a/ANDROID_3.4.5/include/linux/input/pmic8xxx-pwrkey.h b/ANDROID_3.4.5/include/linux/input/pmic8xxx-pwrkey.h
deleted file mode 100644
index 6d2974e5..00000000
--- a/ANDROID_3.4.5/include/linux/input/pmic8xxx-pwrkey.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/* Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#ifndef __PMIC8XXX_PWRKEY_H__
-#define __PMIC8XXX_PWRKEY_H__
-
-#define PM8XXX_PWRKEY_DEV_NAME "pm8xxx-pwrkey"
-
-/**
- * struct pm8xxx_pwrkey_platform_data - platform data for pwrkey driver
- * @pull up:  power on register control for pull up/down configuration
- * @kpd_trigger_delay_us: time delay for power key state change interrupt
- *                  trigger.
- * @wakeup: configure power key as wakeup source
- */
-struct pm8xxx_pwrkey_platform_data  {
-	bool pull_up;
-	u32  kpd_trigger_delay_us;
-	u32  wakeup;
-};
-
-#endif /* __PMIC8XXX_PWRKEY_H__ */
diff --git a/ANDROID_3.4.5/include/linux/input/samsung-keypad.h b/ANDROID_3.4.5/include/linux/input/samsung-keypad.h
deleted file mode 100644
index f25619bf..00000000
--- a/ANDROID_3.4.5/include/linux/input/samsung-keypad.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * Samsung Keypad platform data definitions
- *
- * Copyright (C) 2010 Samsung Electronics Co.Ltd
- * Author: Joonyoung Shim <jy0922.shim@samsung.com>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#ifndef __SAMSUNG_KEYPAD_H
-#define __SAMSUNG_KEYPAD_H
-
-#include <linux/input/matrix_keypad.h>
-
-#define SAMSUNG_MAX_ROWS	8
-#define SAMSUNG_MAX_COLS	8
-
-/**
- * struct samsung_keypad_platdata - Platform device data for Samsung Keypad.
- * @keymap_data: pointer to &matrix_keymap_data.
- * @rows: number of keypad row supported.
- * @cols: number of keypad col supported.
- * @no_autorepeat: disable key autorepeat.
- * @wakeup: controls whether the device should be set up as wakeup source.
- * @cfg_gpio: configure the GPIO.
- *
- * Initialisation data specific to either the machine or the platform
- * for the device driver to use or call-back when configuring gpio.
- */
-struct samsung_keypad_platdata {
-	const struct matrix_keymap_data	*keymap_data;
-	unsigned int rows;
-	unsigned int cols;
-	bool no_autorepeat;
-	bool wakeup;
-
-	void (*cfg_gpio)(unsigned int rows, unsigned int cols);
-};
-
-#endif /* __SAMSUNG_KEYPAD_H */
diff --git a/ANDROID_3.4.5/include/linux/input/sh_keysc.h b/ANDROID_3.4.5/include/linux/input/sh_keysc.h
deleted file mode 100644
index 5d253cd9..00000000
--- a/ANDROID_3.4.5/include/linux/input/sh_keysc.h
+++ /dev/null
@@ -1,15 +0,0 @@
-#ifndef __SH_KEYSC_H__
-#define __SH_KEYSC_H__
-
-#define SH_KEYSC_MAXKEYS 64
-
-struct sh_keysc_info {
-	enum { SH_KEYSC_MODE_1, SH_KEYSC_MODE_2, SH_KEYSC_MODE_3,
-	       SH_KEYSC_MODE_4, SH_KEYSC_MODE_5, SH_KEYSC_MODE_6 } mode;
-	int scan_timing; /* 0 -> 7, see KYCR1, SCN[2:0] */
-	int delay;
-	int kycr2_delay;
-	int keycodes[SH_KEYSC_MAXKEYS]; /* KEYIN * KEYOUT */
-};
-
-#endif /* __SH_KEYSC_H__ */
diff --git a/ANDROID_3.4.5/include/linux/input/sparse-keymap.h b/ANDROID_3.4.5/include/linux/input/sparse-keymap.h
deleted file mode 100644
index 52db6206..00000000
--- a/ANDROID_3.4.5/include/linux/input/sparse-keymap.h
+++ /dev/null
@@ -1,62 +0,0 @@
-#ifndef _SPARSE_KEYMAP_H
-#define _SPARSE_KEYMAP_H
-
-/*
- * Copyright (c) 2009 Dmitry Torokhov
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-
-#define KE_END		0	/* Indicates end of keymap */
-#define KE_KEY		1	/* Ordinary key/button */
-#define KE_SW		2	/* Switch (predetermined value) */
-#define KE_VSW		3	/* Switch (value supplied at runtime) */
-#define KE_IGNORE	4	/* Known entry that should be ignored */
-#define KE_LAST		KE_IGNORE
-
-/**
- * struct key_entry - keymap entry for use in sparse keymap
- * @type: Type of the key entry (KE_KEY, KE_SW, KE_VSW, KE_END);
- *	drivers are allowed to extend the list with their own
- *	private definitions.
- * @code: Device-specific data identifying the button/switch
- * @keycode: KEY_* code assigned to a key/button
- * @sw.code: SW_* code assigned to a switch
- * @sw.value: Value that should be sent in an input even when KE_SW
- *	switch is toggled. KE_VSW switches ignore this field and
- *	expect driver to supply value for the event.
- *
- * This structure defines an entry in a sparse keymap used by some
- * input devices for which traditional table-based approach is not
- * suitable.
- */
-struct key_entry {
-	int type;		/* See KE_* above */
-	u32 code;
-	union {
-		u16 keycode;		/* For KE_KEY */
-		struct {		/* For KE_SW, KE_VSW */
-			u8 code;
-			u8 value;	/* For KE_SW, ignored by KE_VSW */
-		} sw;
-	};
-};
-
-struct key_entry *sparse_keymap_entry_from_scancode(struct input_dev *dev,
-						    unsigned int code);
-struct key_entry *sparse_keymap_entry_from_keycode(struct input_dev *dev,
-						   unsigned int code);
-int sparse_keymap_setup(struct input_dev *dev,
-			const struct key_entry *keymap,
-			int (*setup)(struct input_dev *, struct key_entry *));
-void sparse_keymap_free(struct input_dev *dev);
-
-void sparse_keymap_report_entry(struct input_dev *dev, const struct key_entry *ke,
-				unsigned int value, bool autorelease);
-
-bool sparse_keymap_report_event(struct input_dev *dev, unsigned int code,
-				unsigned int value, bool autorelease);
-
-#endif /* _SPARSE_KEYMAP_H */
diff --git a/ANDROID_3.4.5/include/linux/input/tca8418_keypad.h b/ANDROID_3.4.5/include/linux/input/tca8418_keypad.h
deleted file mode 100644
index e71a85dc..00000000
--- a/ANDROID_3.4.5/include/linux/input/tca8418_keypad.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- * TCA8418 keypad platform support
- *
- * Copyright (C) 2011 Fuel7, Inc.  All rights reserved.
- *
- * Author: Kyle Manna <kyle.manna@fuel7.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public
- * License v2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public
- * License along with this program; if not, write to the
- * Free Software Foundation, Inc., 59 Temple Place - Suite 330,
- * Boston, MA 021110-1307, USA.
- *
- * If you can't comply with GPLv2, alternative licensing terms may be
- * arranged. Please contact Fuel7, Inc. (http://fuel7.com/) for proprietary
- * alternative licensing inquiries.
- */
-
-#ifndef _TCA8418_KEYPAD_H
-#define _TCA8418_KEYPAD_H
-
-#include <linux/types.h>
-#include <linux/input/matrix_keypad.h>
-
-#define TCA8418_I2C_ADDR	0x34
-#define	TCA8418_NAME		"tca8418_keypad"
-
-struct tca8418_keypad_platform_data {
-	const struct matrix_keymap_data *keymap_data;
-	unsigned rows;
-	unsigned cols;
-	bool rep;
-	bool irq_is_gpio;
-};
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/input/ti_tscadc.h b/ANDROID_3.4.5/include/linux/input/ti_tscadc.h
deleted file mode 100644
index b10a527a..00000000
--- a/ANDROID_3.4.5/include/linux/input/ti_tscadc.h
+++ /dev/null
@@ -1,17 +0,0 @@
-#ifndef __LINUX_TI_TSCADC_H
-#define __LINUX_TI_TSCADC_H
-
-/**
- * struct tsc_data	Touchscreen wire configuration
- * @wires:		Wires refer to application modes
- *			i.e. 4/5/8 wire touchscreen support
- *			on the platform.
- * @x_plate_resistance:	X plate resistance.
- */
-
-struct tsc_data {
-	int wires;
-	int x_plate_resistance;
-};
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/input/tps6507x-ts.h b/ANDROID_3.4.5/include/linux/input/tps6507x-ts.h
deleted file mode 100644
index ab144031..00000000
--- a/ANDROID_3.4.5/include/linux/input/tps6507x-ts.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/* linux/i2c/tps6507x-ts.h
- *
- * Functions to access TPS65070 touch screen chip.
- *
- * Copyright (c) 2009 RidgeRun (todd.fischer@ridgerun.com)
- *
- *
- *  For licencing details see kernel-base/COPYING
- */
-
-#ifndef __LINUX_I2C_TPS6507X_TS_H
-#define __LINUX_I2C_TPS6507X_TS_H
-
-/* Board specific touch screen initial values */
-struct touchscreen_init_data {
-	int	poll_period;	/* ms */
-	int	vref;		/* non-zero to leave vref on */
-	__u16	min_pressure;	/* min reading to be treated as a touch */
-	__u16	vendor;
-	__u16	product;
-	__u16	version;
-};
-
-#endif /*  __LINUX_I2C_TPS6507X_TS_H */
diff --git a/ANDROID_3.4.5/include/linux/integrity.h b/ANDROID_3.4.5/include/linux/integrity.h
deleted file mode 100644
index a0c41256..00000000
--- a/ANDROID_3.4.5/include/linux/integrity.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * Copyright (C) 2009 IBM Corporation
- * Author: Mimi Zohar <zohar@us.ibm.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, version 2 of the License.
- */
-
-#ifndef _LINUX_INTEGRITY_H
-#define _LINUX_INTEGRITY_H
-
-#include <linux/fs.h>
-
-enum integrity_status {
-	INTEGRITY_PASS = 0,
-	INTEGRITY_FAIL,
-	INTEGRITY_NOLABEL,
-	INTEGRITY_NOXATTRS,
-	INTEGRITY_UNKNOWN,
-};
-
-/* List of EVM protected security xattrs */
-#ifdef CONFIG_INTEGRITY
-extern int integrity_inode_alloc(struct inode *inode);
-extern void integrity_inode_free(struct inode *inode);
-
-#else
-static inline int integrity_inode_alloc(struct inode *inode)
-{
-	return 0;
-}
-
-static inline void integrity_inode_free(struct inode *inode)
-{
-	return;
-}
-#endif /* CONFIG_INTEGRITY_H */
-#endif /* _LINUX_INTEGRITY_H */
diff --git a/ANDROID_3.4.5/include/linux/intel-iommu.h b/ANDROID_3.4.5/include/linux/intel-iommu.h
deleted file mode 100644
index e6ca56de..00000000
--- a/ANDROID_3.4.5/include/linux/intel-iommu.h
+++ /dev/null
@@ -1,366 +0,0 @@
-/*
- * Copyright (c) 2006, Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc., 59 Temple
- * Place - Suite 330, Boston, MA 02111-1307 USA.
- *
- * Copyright (C) 2006-2008 Intel Corporation
- * Author: Ashok Raj <ashok.raj@intel.com>
- * Author: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
- */
-
-#ifndef _INTEL_IOMMU_H_
-#define _INTEL_IOMMU_H_
-
-#include <linux/types.h>
-#include <linux/iova.h>
-#include <linux/io.h>
-#include <linux/dma_remapping.h>
-#include <asm/cacheflush.h>
-#include <asm/iommu.h>
-
-/*
- * Intel IOMMU register specification per version 1.0 public spec.
- */
-
-#define	DMAR_VER_REG	0x0	/* Arch version supported by this IOMMU */
-#define	DMAR_CAP_REG	0x8	/* Hardware supported capabilities */
-#define	DMAR_ECAP_REG	0x10	/* Extended capabilities supported */
-#define	DMAR_GCMD_REG	0x18	/* Global command register */
-#define	DMAR_GSTS_REG	0x1c	/* Global status register */
-#define	DMAR_RTADDR_REG	0x20	/* Root entry table */
-#define	DMAR_CCMD_REG	0x28	/* Context command reg */
-#define	DMAR_FSTS_REG	0x34	/* Fault Status register */
-#define	DMAR_FECTL_REG	0x38	/* Fault control register */
-#define	DMAR_FEDATA_REG	0x3c	/* Fault event interrupt data register */
-#define	DMAR_FEADDR_REG	0x40	/* Fault event interrupt addr register */
-#define	DMAR_FEUADDR_REG 0x44	/* Upper address register */
-#define	DMAR_AFLOG_REG	0x58	/* Advanced Fault control */
-#define	DMAR_PMEN_REG	0x64	/* Enable Protected Memory Region */
-#define	DMAR_PLMBASE_REG 0x68	/* PMRR Low addr */
-#define	DMAR_PLMLIMIT_REG 0x6c	/* PMRR low limit */
-#define	DMAR_PHMBASE_REG 0x70	/* pmrr high base addr */
-#define	DMAR_PHMLIMIT_REG 0x78	/* pmrr high limit */
-#define DMAR_IQH_REG	0x80	/* Invalidation queue head register */
-#define DMAR_IQT_REG	0x88	/* Invalidation queue tail register */
-#define DMAR_IQ_SHIFT	4	/* Invalidation queue head/tail shift */
-#define DMAR_IQA_REG	0x90	/* Invalidation queue addr register */
-#define DMAR_ICS_REG	0x98	/* Invalidation complete status register */
-#define DMAR_IRTA_REG	0xb8    /* Interrupt remapping table addr register */
-
-#define OFFSET_STRIDE		(9)
-/*
-#define dmar_readl(dmar, reg) readl(dmar + reg)
-#define dmar_readq(dmar, reg) ({ \
-		u32 lo, hi; \
-		lo = readl(dmar + reg); \
-		hi = readl(dmar + reg + 4); \
-		(((u64) hi) << 32) + lo; })
-*/
-static inline u64 dmar_readq(void __iomem *addr)
-{
-	u32 lo, hi;
-	lo = readl(addr);
-	hi = readl(addr + 4);
-	return (((u64) hi) << 32) + lo;
-}
-
-static inline void dmar_writeq(void __iomem *addr, u64 val)
-{
-	writel((u32)val, addr);
-	writel((u32)(val >> 32), addr + 4);
-}
-
-#define DMAR_VER_MAJOR(v)		(((v) & 0xf0) >> 4)
-#define DMAR_VER_MINOR(v)		((v) & 0x0f)
-
-/*
- * Decoding Capability Register
- */
-#define cap_read_drain(c)	(((c) >> 55) & 1)
-#define cap_write_drain(c)	(((c) >> 54) & 1)
-#define cap_max_amask_val(c)	(((c) >> 48) & 0x3f)
-#define cap_num_fault_regs(c)	((((c) >> 40) & 0xff) + 1)
-#define cap_pgsel_inv(c)	(((c) >> 39) & 1)
-
-#define cap_super_page_val(c)	(((c) >> 34) & 0xf)
-#define cap_super_offset(c)	(((find_first_bit(&cap_super_page_val(c), 4)) \
-					* OFFSET_STRIDE) + 21)
-
-#define cap_fault_reg_offset(c)	((((c) >> 24) & 0x3ff) * 16)
-#define cap_max_fault_reg_offset(c) \
-	(cap_fault_reg_offset(c) + cap_num_fault_regs(c) * 16)
-
-#define cap_zlr(c)		(((c) >> 22) & 1)
-#define cap_isoch(c)		(((c) >> 23) & 1)
-#define cap_mgaw(c)		((((c) >> 16) & 0x3f) + 1)
-#define cap_sagaw(c)		(((c) >> 8) & 0x1f)
-#define cap_caching_mode(c)	(((c) >> 7) & 1)
-#define cap_phmr(c)		(((c) >> 6) & 1)
-#define cap_plmr(c)		(((c) >> 5) & 1)
-#define cap_rwbf(c)		(((c) >> 4) & 1)
-#define cap_afl(c)		(((c) >> 3) & 1)
-#define cap_ndoms(c)		(((unsigned long)1) << (4 + 2 * ((c) & 0x7)))
-/*
- * Extended Capability Register
- */
-
-#define ecap_niotlb_iunits(e)	((((e) >> 24) & 0xff) + 1)
-#define ecap_iotlb_offset(e) 	((((e) >> 8) & 0x3ff) * 16)
-#define ecap_max_iotlb_offset(e) \
-	(ecap_iotlb_offset(e) + ecap_niotlb_iunits(e) * 16)
-#define ecap_coherent(e)	((e) & 0x1)
-#define ecap_qis(e)		((e) & 0x2)
-#define ecap_pass_through(e)	((e >> 6) & 0x1)
-#define ecap_eim_support(e)	((e >> 4) & 0x1)
-#define ecap_ir_support(e)	((e >> 3) & 0x1)
-#define ecap_dev_iotlb_support(e)	(((e) >> 2) & 0x1)
-#define ecap_max_handle_mask(e) ((e >> 20) & 0xf)
-#define ecap_sc_support(e)	((e >> 7) & 0x1) /* Snooping Control */
-
-/* IOTLB_REG */
-#define DMA_TLB_FLUSH_GRANU_OFFSET  60
-#define DMA_TLB_GLOBAL_FLUSH (((u64)1) << 60)
-#define DMA_TLB_DSI_FLUSH (((u64)2) << 60)
-#define DMA_TLB_PSI_FLUSH (((u64)3) << 60)
-#define DMA_TLB_IIRG(type) ((type >> 60) & 7)
-#define DMA_TLB_IAIG(val) (((val) >> 57) & 7)
-#define DMA_TLB_READ_DRAIN (((u64)1) << 49)
-#define DMA_TLB_WRITE_DRAIN (((u64)1) << 48)
-#define DMA_TLB_DID(id)	(((u64)((id) & 0xffff)) << 32)
-#define DMA_TLB_IVT (((u64)1) << 63)
-#define DMA_TLB_IH_NONLEAF (((u64)1) << 6)
-#define DMA_TLB_MAX_SIZE (0x3f)
-
-/* INVALID_DESC */
-#define DMA_CCMD_INVL_GRANU_OFFSET  61
-#define DMA_ID_TLB_GLOBAL_FLUSH	(((u64)1) << 3)
-#define DMA_ID_TLB_DSI_FLUSH	(((u64)2) << 3)
-#define DMA_ID_TLB_PSI_FLUSH	(((u64)3) << 3)
-#define DMA_ID_TLB_READ_DRAIN	(((u64)1) << 7)
-#define DMA_ID_TLB_WRITE_DRAIN	(((u64)1) << 6)
-#define DMA_ID_TLB_DID(id)	(((u64)((id & 0xffff) << 16)))
-#define DMA_ID_TLB_IH_NONLEAF	(((u64)1) << 6)
-#define DMA_ID_TLB_ADDR(addr)	(addr)
-#define DMA_ID_TLB_ADDR_MASK(mask)	(mask)
-
-/* PMEN_REG */
-#define DMA_PMEN_EPM (((u32)1)<<31)
-#define DMA_PMEN_PRS (((u32)1)<<0)
-
-/* GCMD_REG */
-#define DMA_GCMD_TE (((u32)1) << 31)
-#define DMA_GCMD_SRTP (((u32)1) << 30)
-#define DMA_GCMD_SFL (((u32)1) << 29)
-#define DMA_GCMD_EAFL (((u32)1) << 28)
-#define DMA_GCMD_WBF (((u32)1) << 27)
-#define DMA_GCMD_QIE (((u32)1) << 26)
-#define DMA_GCMD_SIRTP (((u32)1) << 24)
-#define DMA_GCMD_IRE (((u32) 1) << 25)
-#define DMA_GCMD_CFI (((u32) 1) << 23)
-
-/* GSTS_REG */
-#define DMA_GSTS_TES (((u32)1) << 31)
-#define DMA_GSTS_RTPS (((u32)1) << 30)
-#define DMA_GSTS_FLS (((u32)1) << 29)
-#define DMA_GSTS_AFLS (((u32)1) << 28)
-#define DMA_GSTS_WBFS (((u32)1) << 27)
-#define DMA_GSTS_QIES (((u32)1) << 26)
-#define DMA_GSTS_IRTPS (((u32)1) << 24)
-#define DMA_GSTS_IRES (((u32)1) << 25)
-#define DMA_GSTS_CFIS (((u32)1) << 23)
-
-/* CCMD_REG */
-#define DMA_CCMD_ICC (((u64)1) << 63)
-#define DMA_CCMD_GLOBAL_INVL (((u64)1) << 61)
-#define DMA_CCMD_DOMAIN_INVL (((u64)2) << 61)
-#define DMA_CCMD_DEVICE_INVL (((u64)3) << 61)
-#define DMA_CCMD_FM(m) (((u64)((m) & 0x3)) << 32)
-#define DMA_CCMD_MASK_NOBIT 0
-#define DMA_CCMD_MASK_1BIT 1
-#define DMA_CCMD_MASK_2BIT 2
-#define DMA_CCMD_MASK_3BIT 3
-#define DMA_CCMD_SID(s) (((u64)((s) & 0xffff)) << 16)
-#define DMA_CCMD_DID(d) ((u64)((d) & 0xffff))
-
-/* FECTL_REG */
-#define DMA_FECTL_IM (((u32)1) << 31)
-
-/* FSTS_REG */
-#define DMA_FSTS_PPF ((u32)2)
-#define DMA_FSTS_PFO ((u32)1)
-#define DMA_FSTS_IQE (1 << 4)
-#define DMA_FSTS_ICE (1 << 5)
-#define DMA_FSTS_ITE (1 << 6)
-#define dma_fsts_fault_record_index(s) (((s) >> 8) & 0xff)
-
-/* FRCD_REG, 32 bits access */
-#define DMA_FRCD_F (((u32)1) << 31)
-#define dma_frcd_type(d) ((d >> 30) & 1)
-#define dma_frcd_fault_reason(c) (c & 0xff)
-#define dma_frcd_source_id(c) (c & 0xffff)
-/* low 64 bit */
-#define dma_frcd_page_addr(d) (d & (((u64)-1) << PAGE_SHIFT))
-
-#define IOMMU_WAIT_OP(iommu, offset, op, cond, sts)			\
-do {									\
-	cycles_t start_time = get_cycles();				\
-	while (1) {							\
-		sts = op(iommu->reg + offset);				\
-		if (cond)						\
-			break;						\
-		if (DMAR_OPERATION_TIMEOUT < (get_cycles() - start_time))\
-			panic("DMAR hardware is malfunctioning\n");	\
-		cpu_relax();						\
-	}								\
-} while (0)
-
-#define QI_LENGTH	256	/* queue length */
-
-enum {
-	QI_FREE,
-	QI_IN_USE,
-	QI_DONE,
-	QI_ABORT
-};
-
-#define QI_CC_TYPE		0x1
-#define QI_IOTLB_TYPE		0x2
-#define QI_DIOTLB_TYPE		0x3
-#define QI_IEC_TYPE		0x4
-#define QI_IWD_TYPE		0x5
-
-#define QI_IEC_SELECTIVE	(((u64)1) << 4)
-#define QI_IEC_IIDEX(idx)	(((u64)(idx & 0xffff) << 32))
-#define QI_IEC_IM(m)		(((u64)(m & 0x1f) << 27))
-
-#define QI_IWD_STATUS_DATA(d)	(((u64)d) << 32)
-#define QI_IWD_STATUS_WRITE	(((u64)1) << 5)
-
-#define QI_IOTLB_DID(did) 	(((u64)did) << 16)
-#define QI_IOTLB_DR(dr) 	(((u64)dr) << 7)
-#define QI_IOTLB_DW(dw) 	(((u64)dw) << 6)
-#define QI_IOTLB_GRAN(gran) 	(((u64)gran) >> (DMA_TLB_FLUSH_GRANU_OFFSET-4))
-#define QI_IOTLB_ADDR(addr)	(((u64)addr) & VTD_PAGE_MASK)
-#define QI_IOTLB_IH(ih)		(((u64)ih) << 6)
-#define QI_IOTLB_AM(am)		(((u8)am))
-
-#define QI_CC_FM(fm)		(((u64)fm) << 48)
-#define QI_CC_SID(sid)		(((u64)sid) << 32)
-#define QI_CC_DID(did)		(((u64)did) << 16)
-#define QI_CC_GRAN(gran)	(((u64)gran) >> (DMA_CCMD_INVL_GRANU_OFFSET-4))
-
-#define QI_DEV_IOTLB_SID(sid)	((u64)((sid) & 0xffff) << 32)
-#define QI_DEV_IOTLB_QDEP(qdep)	(((qdep) & 0x1f) << 16)
-#define QI_DEV_IOTLB_ADDR(addr)	((u64)(addr) & VTD_PAGE_MASK)
-#define QI_DEV_IOTLB_SIZE	1
-#define QI_DEV_IOTLB_MAX_INVS	32
-
-struct qi_desc {
-	u64 low, high;
-};
-
-struct q_inval {
-	raw_spinlock_t  q_lock;
-	struct qi_desc  *desc;          /* invalidation queue */
-	int             *desc_status;   /* desc status */
-	int             free_head;      /* first free entry */
-	int             free_tail;      /* last free entry */
-	int             free_cnt;
-};
-
-#ifdef CONFIG_IRQ_REMAP
-/* 1MB - maximum possible interrupt remapping table size */
-#define INTR_REMAP_PAGE_ORDER	8
-#define INTR_REMAP_TABLE_REG_SIZE	0xf
-
-#define INTR_REMAP_TABLE_ENTRIES	65536
-
-struct ir_table {
-	struct irte *base;
-};
-#endif
-
-struct iommu_flush {
-	void (*flush_context)(struct intel_iommu *iommu, u16 did, u16 sid,
-			      u8 fm, u64 type);
-	void (*flush_iotlb)(struct intel_iommu *iommu, u16 did, u64 addr,
-			    unsigned int size_order, u64 type);
-};
-
-enum {
-	SR_DMAR_FECTL_REG,
-	SR_DMAR_FEDATA_REG,
-	SR_DMAR_FEADDR_REG,
-	SR_DMAR_FEUADDR_REG,
-	MAX_SR_DMAR_REGS
-};
-
-struct intel_iommu {
-	void __iomem	*reg; /* Pointer to hardware regs, virtual addr */
-	u64		cap;
-	u64		ecap;
-	u32		gcmd; /* Holds TE, EAFL. Don't need SRTP, SFL, WBF */
-	raw_spinlock_t	register_lock; /* protect register handling */
-	int		seq_id;	/* sequence id of the iommu */
-	int		agaw; /* agaw of this iommu */
-	int		msagaw; /* max sagaw of this iommu */
-	unsigned int 	irq;
-	unsigned char 	name[13];    /* Device Name */
-
-#ifdef CONFIG_INTEL_IOMMU
-	unsigned long 	*domain_ids; /* bitmap of domains */
-	struct dmar_domain **domains; /* ptr to domains */
-	spinlock_t	lock; /* protect context, domain ids */
-	struct root_entry *root_entry; /* virtual address */
-
-	struct iommu_flush flush;
-#endif
-	struct q_inval  *qi;            /* Queued invalidation info */
-	u32 *iommu_state; /* Store iommu states between suspend and resume.*/
-
-#ifdef CONFIG_IRQ_REMAP
-	struct ir_table *ir_table;	/* Interrupt remapping info */
-#endif
-	int		node;
-};
-
-static inline void __iommu_flush_cache(
-	struct intel_iommu *iommu, void *addr, int size)
-{
-	if (!ecap_coherent(iommu->ecap))
-		clflush_cache_range(addr, size);
-}
-
-extern struct dmar_drhd_unit * dmar_find_matched_drhd_unit(struct pci_dev *dev);
-extern int dmar_find_matched_atsr_unit(struct pci_dev *dev);
-
-extern int alloc_iommu(struct dmar_drhd_unit *drhd);
-extern void free_iommu(struct intel_iommu *iommu);
-extern int dmar_enable_qi(struct intel_iommu *iommu);
-extern void dmar_disable_qi(struct intel_iommu *iommu);
-extern int dmar_reenable_qi(struct intel_iommu *iommu);
-extern void qi_global_iec(struct intel_iommu *iommu);
-
-extern void qi_flush_context(struct intel_iommu *iommu, u16 did, u16 sid,
-			     u8 fm, u64 type);
-extern void qi_flush_iotlb(struct intel_iommu *iommu, u16 did, u64 addr,
-			  unsigned int size_order, u64 type);
-extern void qi_flush_dev_iotlb(struct intel_iommu *iommu, u16 sid, u16 qdep,
-			       u64 addr, unsigned mask);
-
-extern int qi_submit_sync(struct qi_desc *desc, struct intel_iommu *iommu);
-
-extern int dmar_ir_support(void);
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/intel_mid_dma.h b/ANDROID_3.4.5/include/linux/intel_mid_dma.h
deleted file mode 100644
index 10496bd2..00000000
--- a/ANDROID_3.4.5/include/linux/intel_mid_dma.h
+++ /dev/null
@@ -1,76 +0,0 @@
-/*
- *  intel_mid_dma.h - Intel MID DMA Drivers
- *
- *  Copyright (C) 2008-10 Intel Corp
- *  Author: Vinod Koul <vinod.koul@intel.com>
- *  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; version 2 of the License.
- *
- *  This program is distributed in the hope that it will be useful, but
- *  WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- *  General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
- *
- * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- *
- *
- */
-#ifndef __INTEL_MID_DMA_H__
-#define __INTEL_MID_DMA_H__
-
-#include <linux/dmaengine.h>
-
-#define DMA_PREP_CIRCULAR_LIST		(1 << 10)
-
-/*DMA mode configurations*/
-enum intel_mid_dma_mode {
-	LNW_DMA_PER_TO_MEM = 0, /*periphral to memory configuration*/
-	LNW_DMA_MEM_TO_PER,	/*memory to periphral configuration*/
-	LNW_DMA_MEM_TO_MEM,	/*mem to mem confg (testing only)*/
-};
-
-/*DMA handshaking*/
-enum intel_mid_dma_hs_mode {
-	LNW_DMA_HW_HS = 0,	/*HW Handshaking only*/
-	LNW_DMA_SW_HS = 1,	/*SW Handshaking not recommended*/
-};
-
-/*Burst size configuration*/
-enum intel_mid_dma_msize {
-	LNW_DMA_MSIZE_1 = 0x0,
-	LNW_DMA_MSIZE_4 = 0x1,
-	LNW_DMA_MSIZE_8 = 0x2,
-	LNW_DMA_MSIZE_16 = 0x3,
-	LNW_DMA_MSIZE_32 = 0x4,
-	LNW_DMA_MSIZE_64 = 0x5,
-};
-
-/**
- * struct intel_mid_dma_slave - DMA slave structure
- *
- * @dirn: DMA trf direction
- * @src_width: tx register width
- * @dst_width: rx register width
- * @hs_mode: HW/SW handshaking mode
- * @cfg_mode: DMA data transfer mode (per-per/mem-per/mem-mem)
- * @src_msize: Source DMA burst size
- * @dst_msize: Dst DMA burst size
- * @per_addr: Periphral address
- * @device_instance: DMA peripheral device instance, we can have multiple
- *		peripheral device connected to single DMAC
- */
-struct intel_mid_dma_slave {
-	enum intel_mid_dma_hs_mode	hs_mode;  /*handshaking*/
-	enum intel_mid_dma_mode		cfg_mode; /*mode configuration*/
-	unsigned int		device_instance; /*0, 1 for periphral instance*/
-	struct dma_slave_config		dma_slave;
-};
-
-#endif /*__INTEL_MID_DMA_H__*/
diff --git a/ANDROID_3.4.5/include/linux/intel_pmic_gpio.h b/ANDROID_3.4.5/include/linux/intel_pmic_gpio.h
deleted file mode 100644
index 920109a2..00000000
--- a/ANDROID_3.4.5/include/linux/intel_pmic_gpio.h
+++ /dev/null
@@ -1,15 +0,0 @@
-#ifndef LINUX_INTEL_PMIC_H
-#define LINUX_INTEL_PMIC_H
-
-struct intel_pmic_gpio_platform_data {
-	/* the first IRQ of the chip */
-	unsigned	irq_base;
-	/* number assigned to the first GPIO */
-	unsigned	gpio_base;
-	/* sram address for gpiointr register, the langwell chip will map
-	 * the PMIC spi GPIO expander's GPIOINTR register in sram.
-	 */
-	unsigned	gpiointr;
-};
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/interrupt.h b/ANDROID_3.4.5/include/linux/interrupt.h
deleted file mode 100644
index 2aea5d22..00000000
--- a/ANDROID_3.4.5/include/linux/interrupt.h
+++ /dev/null
@@ -1,703 +0,0 @@
-/* interrupt.h */
-#ifndef _LINUX_INTERRUPT_H
-#define _LINUX_INTERRUPT_H
-
-#include <linux/kernel.h>
-#include <linux/linkage.h>
-#include <linux/bitops.h>
-#include <linux/preempt.h>
-#include <linux/cpumask.h>
-#include <linux/irqreturn.h>
-#include <linux/irqnr.h>
-#include <linux/hardirq.h>
-#include <linux/irqflags.h>
-#include <linux/smp.h>
-#include <linux/percpu.h>
-#include <linux/hrtimer.h>
-#include <linux/kref.h>
-#include <linux/workqueue.h>
-
-#include <linux/atomic.h>
-#include <asm/ptrace.h>
-
-/*
- * These correspond to the IORESOURCE_IRQ_* defines in
- * linux/ioport.h to select the interrupt line behaviour.  When
- * requesting an interrupt without specifying a IRQF_TRIGGER, the
- * setting should be assumed to be "as already configured", which
- * may be as per machine or firmware initialisation.
- */
-#define IRQF_TRIGGER_NONE	0x00000000
-#define IRQF_TRIGGER_RISING	0x00000001
-#define IRQF_TRIGGER_FALLING	0x00000002
-#define IRQF_TRIGGER_HIGH	0x00000004
-#define IRQF_TRIGGER_LOW	0x00000008
-#define IRQF_TRIGGER_MASK	(IRQF_TRIGGER_HIGH | IRQF_TRIGGER_LOW | \
-				 IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING)
-#define IRQF_TRIGGER_PROBE	0x00000010
-
-/*
- * These flags used only by the kernel as part of the
- * irq handling routines.
- *
- * IRQF_DISABLED - keep irqs disabled when calling the action handler.
- *                 DEPRECATED. This flag is a NOOP and scheduled to be removed
- * IRQF_SAMPLE_RANDOM - irq is used to feed the random generator
- * IRQF_SHARED - allow sharing the irq among several devices
- * IRQF_PROBE_SHARED - set by callers when they expect sharing mismatches to occur
- * IRQF_TIMER - Flag to mark this interrupt as timer interrupt
- * IRQF_PERCPU - Interrupt is per cpu
- * IRQF_NOBALANCING - Flag to exclude this interrupt from irq balancing
- * IRQF_IRQPOLL - Interrupt is used for polling (only the interrupt that is
- *                registered first in an shared interrupt is considered for
- *                performance reasons)
- * IRQF_ONESHOT - Interrupt is not reenabled after the hardirq handler finished.
- *                Used by threaded interrupts which need to keep the
- *                irq line disabled until the threaded handler has been run.
- * IRQF_NO_SUSPEND - Do not disable this IRQ during suspend
- * IRQF_FORCE_RESUME - Force enable it on resume even if IRQF_NO_SUSPEND is set
- * IRQF_NO_THREAD - Interrupt cannot be threaded
- * IRQF_EARLY_RESUME - Resume IRQ early during syscore instead of at device
- *                resume time.
- */
-#define IRQF_DISABLED		0x00000020
-#define IRQF_SAMPLE_RANDOM	0x00000040
-#define IRQF_SHARED		0x00000080
-#define IRQF_PROBE_SHARED	0x00000100
-#define __IRQF_TIMER		0x00000200
-#define IRQF_PERCPU		0x00000400
-#define IRQF_NOBALANCING	0x00000800
-#define IRQF_IRQPOLL		0x00001000
-#define IRQF_ONESHOT		0x00002000
-#define IRQF_NO_SUSPEND		0x00004000
-#define IRQF_FORCE_RESUME	0x00008000
-#define IRQF_NO_THREAD		0x00010000
-#define IRQF_EARLY_RESUME	0x00020000
-
-#define IRQF_TIMER		(__IRQF_TIMER | IRQF_NO_SUSPEND | IRQF_NO_THREAD)
-
-/*
- * These values can be returned by request_any_context_irq() and
- * describe the context the interrupt will be run in.
- *
- * IRQC_IS_HARDIRQ - interrupt runs in hardirq context
- * IRQC_IS_NESTED - interrupt runs in a nested threaded context
- */
-enum {
-	IRQC_IS_HARDIRQ	= 0,
-	IRQC_IS_NESTED,
-};
-
-typedef irqreturn_t (*irq_handler_t)(int, void *);
-
-/**
- * struct irqaction - per interrupt action descriptor
- * @handler:	interrupt handler function
- * @flags:	flags (see IRQF_* above)
- * @name:	name of the device
- * @dev_id:	cookie to identify the device
- * @percpu_dev_id:	cookie to identify the device
- * @next:	pointer to the next irqaction for shared interrupts
- * @irq:	interrupt number
- * @dir:	pointer to the proc/irq/NN/name entry
- * @thread_fn:	interrupt handler function for threaded interrupts
- * @thread:	thread pointer for threaded interrupts
- * @thread_flags:	flags related to @thread
- * @thread_mask:	bitmask for keeping track of @thread activity
- */
-struct irqaction {
-	irq_handler_t		handler;
-	unsigned long		flags;
-	void			*dev_id;
-	void __percpu		*percpu_dev_id;
-	struct irqaction	*next;
-	int			irq;
-	irq_handler_t		thread_fn;
-	struct task_struct	*thread;
-	unsigned long		thread_flags;
-	unsigned long		thread_mask;
-	const char		*name;
-	struct proc_dir_entry	*dir;
-} ____cacheline_internodealigned_in_smp;
-
-extern irqreturn_t no_action(int cpl, void *dev_id);
-
-#ifdef CONFIG_GENERIC_HARDIRQS
-extern int __must_check
-request_threaded_irq(unsigned int irq, irq_handler_t handler,
-		     irq_handler_t thread_fn,
-		     unsigned long flags, const char *name, void *dev);
-
-static inline int __must_check
-request_irq(unsigned int irq, irq_handler_t handler, unsigned long flags,
-	    const char *name, void *dev)
-{
-	return request_threaded_irq(irq, handler, NULL, flags, name, dev);
-}
-
-extern int __must_check
-request_any_context_irq(unsigned int irq, irq_handler_t handler,
-			unsigned long flags, const char *name, void *dev_id);
-
-extern int __must_check
-request_percpu_irq(unsigned int irq, irq_handler_t handler,
-		   const char *devname, void __percpu *percpu_dev_id);
-
-extern void exit_irq_thread(void);
-#else
-
-extern int __must_check
-request_irq(unsigned int irq, irq_handler_t handler, unsigned long flags,
-	    const char *name, void *dev);
-
-/*
- * Special function to avoid ifdeffery in kernel/irq/devres.c which
- * gets magically built by GENERIC_HARDIRQS=n architectures (sparc,
- * m68k). I really love these $@%#!* obvious Makefile references:
- * ../../../kernel/irq/devres.o
- */
-static inline int __must_check
-request_threaded_irq(unsigned int irq, irq_handler_t handler,
-		     irq_handler_t thread_fn,
-		     unsigned long flags, const char *name, void *dev)
-{
-	return request_irq(irq, handler, flags, name, dev);
-}
-
-static inline int __must_check
-request_any_context_irq(unsigned int irq, irq_handler_t handler,
-			unsigned long flags, const char *name, void *dev_id)
-{
-	return request_irq(irq, handler, flags, name, dev_id);
-}
-
-static inline int __must_check
-request_percpu_irq(unsigned int irq, irq_handler_t handler,
-		   const char *devname, void __percpu *percpu_dev_id)
-{
-	return request_irq(irq, handler, 0, devname, percpu_dev_id);
-}
-
-static inline void exit_irq_thread(void) { }
-#endif
-
-extern void free_irq(unsigned int, void *);
-extern void free_percpu_irq(unsigned int, void __percpu *);
-
-struct device;
-
-extern int __must_check
-devm_request_threaded_irq(struct device *dev, unsigned int irq,
-			  irq_handler_t handler, irq_handler_t thread_fn,
-			  unsigned long irqflags, const char *devname,
-			  void *dev_id);
-
-static inline int __must_check
-devm_request_irq(struct device *dev, unsigned int irq, irq_handler_t handler,
-		 unsigned long irqflags, const char *devname, void *dev_id)
-{
-	return devm_request_threaded_irq(dev, irq, handler, NULL, irqflags,
-					 devname, dev_id);
-}
-
-extern void devm_free_irq(struct device *dev, unsigned int irq, void *dev_id);
-
-/*
- * On lockdep we dont want to enable hardirqs in hardirq
- * context. Use local_irq_enable_in_hardirq() to annotate
- * kernel code that has to do this nevertheless (pretty much
- * the only valid case is for old/broken hardware that is
- * insanely slow).
- *
- * NOTE: in theory this might break fragile code that relies
- * on hardirq delivery - in practice we dont seem to have such
- * places left. So the only effect should be slightly increased
- * irqs-off latencies.
- */
-#ifdef CONFIG_LOCKDEP
-# define local_irq_enable_in_hardirq()	do { } while (0)
-#else
-# define local_irq_enable_in_hardirq()	local_irq_enable()
-#endif
-
-extern void disable_irq_nosync(unsigned int irq);
-extern void disable_irq(unsigned int irq);
-extern void disable_percpu_irq(unsigned int irq);
-extern void enable_irq(unsigned int irq);
-extern void enable_percpu_irq(unsigned int irq, unsigned int type);
-
-/* The following three functions are for the core kernel use only. */
-#ifdef CONFIG_GENERIC_HARDIRQS
-extern void suspend_device_irqs(void);
-extern void resume_device_irqs(void);
-#ifdef CONFIG_PM_SLEEP
-extern int check_wakeup_irqs(void);
-#else
-static inline int check_wakeup_irqs(void) { return 0; }
-#endif
-#else
-static inline void suspend_device_irqs(void) { };
-static inline void resume_device_irqs(void) { };
-static inline int check_wakeup_irqs(void) { return 0; }
-#endif
-
-#if defined(CONFIG_SMP) && defined(CONFIG_GENERIC_HARDIRQS)
-
-extern cpumask_var_t irq_default_affinity;
-
-extern int irq_set_affinity(unsigned int irq, const struct cpumask *cpumask);
-extern int irq_can_set_affinity(unsigned int irq);
-extern int irq_select_affinity(unsigned int irq);
-
-extern int irq_set_affinity_hint(unsigned int irq, const struct cpumask *m);
-
-/**
- * struct irq_affinity_notify - context for notification of IRQ affinity changes
- * @irq:		Interrupt to which notification applies
- * @kref:		Reference count, for internal use
- * @work:		Work item, for internal use
- * @notify:		Function to be called on change.  This will be
- *			called in process context.
- * @release:		Function to be called on release.  This will be
- *			called in process context.  Once registered, the
- *			structure must only be freed when this function is
- *			called or later.
- */
-struct irq_affinity_notify {
-	unsigned int irq;
-	struct kref kref;
-	struct work_struct work;
-	void (*notify)(struct irq_affinity_notify *, const cpumask_t *mask);
-	void (*release)(struct kref *ref);
-};
-
-extern int
-irq_set_affinity_notifier(unsigned int irq, struct irq_affinity_notify *notify);
-
-static inline void irq_run_affinity_notifiers(void)
-{
-	flush_scheduled_work();
-}
-
-#else /* CONFIG_SMP */
-
-static inline int irq_set_affinity(unsigned int irq, const struct cpumask *m)
-{
-	return -EINVAL;
-}
-
-static inline int irq_can_set_affinity(unsigned int irq)
-{
-	return 0;
-}
-
-static inline int irq_select_affinity(unsigned int irq)  { return 0; }
-
-static inline int irq_set_affinity_hint(unsigned int irq,
-					const struct cpumask *m)
-{
-	return -EINVAL;
-}
-#endif /* CONFIG_SMP && CONFIG_GENERIC_HARDIRQS */
-
-#ifdef CONFIG_GENERIC_HARDIRQS
-/*
- * Special lockdep variants of irq disabling/enabling.
- * These should be used for locking constructs that
- * know that a particular irq context which is disabled,
- * and which is the only irq-context user of a lock,
- * that it's safe to take the lock in the irq-disabled
- * section without disabling hardirqs.
- *
- * On !CONFIG_LOCKDEP they are equivalent to the normal
- * irq disable/enable methods.
- */
-static inline void disable_irq_nosync_lockdep(unsigned int irq)
-{
-	disable_irq_nosync(irq);
-#ifdef CONFIG_LOCKDEP
-	local_irq_disable();
-#endif
-}
-
-static inline void disable_irq_nosync_lockdep_irqsave(unsigned int irq, unsigned long *flags)
-{
-	disable_irq_nosync(irq);
-#ifdef CONFIG_LOCKDEP
-	local_irq_save(*flags);
-#endif
-}
-
-static inline void disable_irq_lockdep(unsigned int irq)
-{
-	disable_irq(irq);
-#ifdef CONFIG_LOCKDEP
-	local_irq_disable();
-#endif
-}
-
-static inline void enable_irq_lockdep(unsigned int irq)
-{
-#ifdef CONFIG_LOCKDEP
-	local_irq_enable();
-#endif
-	enable_irq(irq);
-}
-
-static inline void enable_irq_lockdep_irqrestore(unsigned int irq, unsigned long *flags)
-{
-#ifdef CONFIG_LOCKDEP
-	local_irq_restore(*flags);
-#endif
-	enable_irq(irq);
-}
-
-/* IRQ wakeup (PM) control: */
-extern int irq_set_irq_wake(unsigned int irq, unsigned int on);
-
-static inline int enable_irq_wake(unsigned int irq)
-{
-	return irq_set_irq_wake(irq, 1);
-}
-
-static inline int disable_irq_wake(unsigned int irq)
-{
-	return irq_set_irq_wake(irq, 0);
-}
-
-#else /* !CONFIG_GENERIC_HARDIRQS */
-/*
- * NOTE: non-genirq architectures, if they want to support the lock
- * validator need to define the methods below in their asm/irq.h
- * files, under an #ifdef CONFIG_LOCKDEP section.
- */
-#ifndef CONFIG_LOCKDEP
-#  define disable_irq_nosync_lockdep(irq)	disable_irq_nosync(irq)
-#  define disable_irq_nosync_lockdep_irqsave(irq, flags) \
-						disable_irq_nosync(irq)
-#  define disable_irq_lockdep(irq)		disable_irq(irq)
-#  define enable_irq_lockdep(irq)		enable_irq(irq)
-#  define enable_irq_lockdep_irqrestore(irq, flags) \
-						enable_irq(irq)
-# endif
-
-static inline int enable_irq_wake(unsigned int irq)
-{
-	return 0;
-}
-
-static inline int disable_irq_wake(unsigned int irq)
-{
-	return 0;
-}
-#endif /* CONFIG_GENERIC_HARDIRQS */
-
-
-#ifdef CONFIG_IRQ_FORCED_THREADING
-extern bool force_irqthreads;
-#else
-#define force_irqthreads	(0)
-#endif
-
-#ifndef __ARCH_SET_SOFTIRQ_PENDING
-#define set_softirq_pending(x) (local_softirq_pending() = (x))
-#define or_softirq_pending(x)  (local_softirq_pending() |= (x))
-#endif
-
-/* Some architectures might implement lazy enabling/disabling of
- * interrupts. In some cases, such as stop_machine, we might want
- * to ensure that after a local_irq_disable(), interrupts have
- * really been disabled in hardware. Such architectures need to
- * implement the following hook.
- */
-#ifndef hard_irq_disable
-#define hard_irq_disable()	do { } while(0)
-#endif
-
-/* PLEASE, avoid to allocate new softirqs, if you need not _really_ high
-   frequency threaded job scheduling. For almost all the purposes
-   tasklets are more than enough. F.e. all serial device BHs et
-   al. should be converted to tasklets, not to softirqs.
- */
-
-enum
-{
-	HI_SOFTIRQ=0,
-	TIMER_SOFTIRQ,
-	NET_TX_SOFTIRQ,
-	NET_RX_SOFTIRQ,
-	BLOCK_SOFTIRQ,
-	BLOCK_IOPOLL_SOFTIRQ,
-	TASKLET_SOFTIRQ,
-	SCHED_SOFTIRQ,
-	HRTIMER_SOFTIRQ,
-	RCU_SOFTIRQ,    /* Preferable RCU should always be the last softirq */
-
-	NR_SOFTIRQS
-};
-
-/* map softirq index to softirq name. update 'softirq_to_name' in
- * kernel/softirq.c when adding a new softirq.
- */
-extern char *softirq_to_name[NR_SOFTIRQS];
-
-/* softirq mask and active fields moved to irq_cpustat_t in
- * asm/hardirq.h to get better cache usage.  KAO
- */
-
-struct softirq_action
-{
-	void	(*action)(struct softirq_action *);
-};
-
-asmlinkage void do_softirq(void);
-asmlinkage void __do_softirq(void);
-extern void open_softirq(int nr, void (*action)(struct softirq_action *));
-extern void softirq_init(void);
-extern void __raise_softirq_irqoff(unsigned int nr);
-
-extern void raise_softirq_irqoff(unsigned int nr);
-extern void raise_softirq(unsigned int nr);
-
-/* This is the worklist that queues up per-cpu softirq work.
- *
- * send_remote_sendirq() adds work to these lists, and
- * the softirq handler itself dequeues from them.  The queues
- * are protected by disabling local cpu interrupts and they must
- * only be accessed by the local cpu that they are for.
- */
-DECLARE_PER_CPU(struct list_head [NR_SOFTIRQS], softirq_work_list);
-
-DECLARE_PER_CPU(struct task_struct *, ksoftirqd);
-
-static inline struct task_struct *this_cpu_ksoftirqd(void)
-{
-	return this_cpu_read(ksoftirqd);
-}
-
-/* Try to send a softirq to a remote cpu.  If this cannot be done, the
- * work will be queued to the local cpu.
- */
-extern void send_remote_softirq(struct call_single_data *cp, int cpu, int softirq);
-
-/* Like send_remote_softirq(), but the caller must disable local cpu interrupts
- * and compute the current cpu, passed in as 'this_cpu'.
- */
-extern void __send_remote_softirq(struct call_single_data *cp, int cpu,
-				  int this_cpu, int softirq);
-
-/* Tasklets --- multithreaded analogue of BHs.
-
-   Main feature differing them of generic softirqs: tasklet
-   is running only on one CPU simultaneously.
-
-   Main feature differing them of BHs: different tasklets
-   may be run simultaneously on different CPUs.
-
-   Properties:
-   * If tasklet_schedule() is called, then tasklet is guaranteed
-     to be executed on some cpu at least once after this.
-   * If the tasklet is already scheduled, but its execution is still not
-     started, it will be executed only once.
-   * If this tasklet is already running on another CPU (or schedule is called
-     from tasklet itself), it is rescheduled for later.
-   * Tasklet is strictly serialized wrt itself, but not
-     wrt another tasklets. If client needs some intertask synchronization,
-     he makes it with spinlocks.
- */
-
-struct tasklet_struct
-{
-	struct tasklet_struct *next;
-	unsigned long state;
-	atomic_t count;
-	void (*func)(unsigned long);
-	unsigned long data;
-};
-
-#define DECLARE_TASKLET(name, func, data) \
-struct tasklet_struct name = { NULL, 0, ATOMIC_INIT(0), func, data }
-
-#define DECLARE_TASKLET_DISABLED(name, func, data) \
-struct tasklet_struct name = { NULL, 0, ATOMIC_INIT(1), func, data }
-
-
-enum
-{
-	TASKLET_STATE_SCHED,	/* Tasklet is scheduled for execution */
-	TASKLET_STATE_RUN	/* Tasklet is running (SMP only) */
-};
-
-#ifdef CONFIG_SMP
-static inline int tasklet_trylock(struct tasklet_struct *t)
-{
-	return !test_and_set_bit(TASKLET_STATE_RUN, &(t)->state);
-}
-
-static inline void tasklet_unlock(struct tasklet_struct *t)
-{
-	smp_mb__before_clear_bit(); 
-	clear_bit(TASKLET_STATE_RUN, &(t)->state);
-}
-
-static inline void tasklet_unlock_wait(struct tasklet_struct *t)
-{
-	while (test_bit(TASKLET_STATE_RUN, &(t)->state)) { barrier(); }
-}
-#else
-#define tasklet_trylock(t) 1
-#define tasklet_unlock_wait(t) do { } while (0)
-#define tasklet_unlock(t) do { } while (0)
-#endif
-
-extern void __tasklet_schedule(struct tasklet_struct *t);
-
-static inline void tasklet_schedule(struct tasklet_struct *t)
-{
-	if (!test_and_set_bit(TASKLET_STATE_SCHED, &t->state))
-		__tasklet_schedule(t);
-}
-
-extern void __tasklet_hi_schedule(struct tasklet_struct *t);
-
-static inline void tasklet_hi_schedule(struct tasklet_struct *t)
-{
-	if (!test_and_set_bit(TASKLET_STATE_SCHED, &t->state))
-		__tasklet_hi_schedule(t);
-}
-
-extern void __tasklet_hi_schedule_first(struct tasklet_struct *t);
-
-/*
- * This version avoids touching any other tasklets. Needed for kmemcheck
- * in order not to take any page faults while enqueueing this tasklet;
- * consider VERY carefully whether you really need this or
- * tasklet_hi_schedule()...
- */
-static inline void tasklet_hi_schedule_first(struct tasklet_struct *t)
-{
-	if (!test_and_set_bit(TASKLET_STATE_SCHED, &t->state))
-		__tasklet_hi_schedule_first(t);
-}
-
-
-static inline void tasklet_disable_nosync(struct tasklet_struct *t)
-{
-	atomic_inc(&t->count);
-	smp_mb__after_atomic_inc();
-}
-
-static inline void tasklet_disable(struct tasklet_struct *t)
-{
-	tasklet_disable_nosync(t);
-	tasklet_unlock_wait(t);
-	smp_mb();
-}
-
-static inline void tasklet_enable(struct tasklet_struct *t)
-{
-	smp_mb__before_atomic_dec();
-	atomic_dec(&t->count);
-}
-
-static inline void tasklet_hi_enable(struct tasklet_struct *t)
-{
-	smp_mb__before_atomic_dec();
-	atomic_dec(&t->count);
-}
-
-extern void tasklet_kill(struct tasklet_struct *t);
-extern void tasklet_kill_immediate(struct tasklet_struct *t, unsigned int cpu);
-extern void tasklet_init(struct tasklet_struct *t,
-			 void (*func)(unsigned long), unsigned long data);
-
-struct tasklet_hrtimer {
-	struct hrtimer		timer;
-	struct tasklet_struct	tasklet;
-	enum hrtimer_restart	(*function)(struct hrtimer *);
-};
-
-extern void
-tasklet_hrtimer_init(struct tasklet_hrtimer *ttimer,
-		     enum hrtimer_restart (*function)(struct hrtimer *),
-		     clockid_t which_clock, enum hrtimer_mode mode);
-
-static inline
-int tasklet_hrtimer_start(struct tasklet_hrtimer *ttimer, ktime_t time,
-			  const enum hrtimer_mode mode)
-{
-	return hrtimer_start(&ttimer->timer, time, mode);
-}
-
-static inline
-void tasklet_hrtimer_cancel(struct tasklet_hrtimer *ttimer)
-{
-	hrtimer_cancel(&ttimer->timer);
-	tasklet_kill(&ttimer->tasklet);
-}
-
-/*
- * Autoprobing for irqs:
- *
- * probe_irq_on() and probe_irq_off() provide robust primitives
- * for accurate IRQ probing during kernel initialization.  They are
- * reasonably simple to use, are not "fooled" by spurious interrupts,
- * and, unlike other attempts at IRQ probing, they do not get hung on
- * stuck interrupts (such as unused PS2 mouse interfaces on ASUS boards).
- *
- * For reasonably foolproof probing, use them as follows:
- *
- * 1. clear and/or mask the device's internal interrupt.
- * 2. sti();
- * 3. irqs = probe_irq_on();      // "take over" all unassigned idle IRQs
- * 4. enable the device and cause it to trigger an interrupt.
- * 5. wait for the device to interrupt, using non-intrusive polling or a delay.
- * 6. irq = probe_irq_off(irqs);  // get IRQ number, 0=none, negative=multiple
- * 7. service the device to clear its pending interrupt.
- * 8. loop again if paranoia is required.
- *
- * probe_irq_on() returns a mask of allocated irq's.
- *
- * probe_irq_off() takes the mask as a parameter,
- * and returns the irq number which occurred,
- * or zero if none occurred, or a negative irq number
- * if more than one irq occurred.
- */
-
-#if defined(CONFIG_GENERIC_HARDIRQS) && !defined(CONFIG_GENERIC_IRQ_PROBE) 
-static inline unsigned long probe_irq_on(void)
-{
-	return 0;
-}
-static inline int probe_irq_off(unsigned long val)
-{
-	return 0;
-}
-static inline unsigned int probe_irq_mask(unsigned long val)
-{
-	return 0;
-}
-#else
-extern unsigned long probe_irq_on(void);	/* returns 0 on failure */
-extern int probe_irq_off(unsigned long);	/* returns 0 or negative on failure */
-extern unsigned int probe_irq_mask(unsigned long);	/* returns mask of ISA interrupts */
-#endif
-
-#ifdef CONFIG_PROC_FS
-/* Initialize /proc/irq/ */
-extern void init_irq_proc(void);
-#else
-static inline void init_irq_proc(void)
-{
-}
-#endif
-
-struct seq_file;
-int show_interrupts(struct seq_file *p, void *v);
-int arch_show_interrupts(struct seq_file *p, int prec);
-
-extern int early_irq_init(void);
-extern int arch_probe_nr_irqs(void);
-extern int arch_early_irq_init(void);
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/io-mapping.h b/ANDROID_3.4.5/include/linux/io-mapping.h
deleted file mode 100644
index 657fab4e..00000000
--- a/ANDROID_3.4.5/include/linux/io-mapping.h
+++ /dev/null
@@ -1,168 +0,0 @@
-/*
- * Copyright © 2008 Keith Packard <keithp@keithp.com>
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of version 2 of the GNU General Public License
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software Foundation,
- * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301, USA.
- */
-
-#ifndef _LINUX_IO_MAPPING_H
-#define _LINUX_IO_MAPPING_H
-
-#include <linux/types.h>
-#include <linux/slab.h>
-#include <linux/bug.h>
-#include <asm/io.h>
-#include <asm/page.h>
-
-/*
- * The io_mapping mechanism provides an abstraction for mapping
- * individual pages from an io device to the CPU in an efficient fashion.
- *
- * See Documentation/io-mapping.txt
- */
-
-#ifdef CONFIG_HAVE_ATOMIC_IOMAP
-
-#include <asm/iomap.h>
-
-struct io_mapping {
-	resource_size_t base;
-	unsigned long size;
-	pgprot_t prot;
-};
-
-/*
- * For small address space machines, mapping large objects
- * into the kernel virtual space isn't practical. Where
- * available, use fixmap support to dynamically map pages
- * of the object at run time.
- */
-
-static inline struct io_mapping *
-io_mapping_create_wc(resource_size_t base, unsigned long size)
-{
-	struct io_mapping *iomap;
-	pgprot_t prot;
-
-	iomap = kmalloc(sizeof(*iomap), GFP_KERNEL);
-	if (!iomap)
-		goto out_err;
-
-	if (iomap_create_wc(base, size, &prot))
-		goto out_free;
-
-	iomap->base = base;
-	iomap->size = size;
-	iomap->prot = prot;
-	return iomap;
-
-out_free:
-	kfree(iomap);
-out_err:
-	return NULL;
-}
-
-static inline void
-io_mapping_free(struct io_mapping *mapping)
-{
-	iomap_free(mapping->base, mapping->size);
-	kfree(mapping);
-}
-
-/* Atomic map/unmap */
-static inline void __iomem *
-io_mapping_map_atomic_wc(struct io_mapping *mapping,
-			 unsigned long offset)
-{
-	resource_size_t phys_addr;
-	unsigned long pfn;
-
-	BUG_ON(offset >= mapping->size);
-	phys_addr = mapping->base + offset;
-	pfn = (unsigned long) (phys_addr >> PAGE_SHIFT);
-	return iomap_atomic_prot_pfn(pfn, mapping->prot);
-}
-
-static inline void
-io_mapping_unmap_atomic(void __iomem *vaddr)
-{
-	iounmap_atomic(vaddr);
-}
-
-static inline void __iomem *
-io_mapping_map_wc(struct io_mapping *mapping, unsigned long offset)
-{
-	resource_size_t phys_addr;
-
-	BUG_ON(offset >= mapping->size);
-	phys_addr = mapping->base + offset;
-
-	return ioremap_wc(phys_addr, PAGE_SIZE);
-}
-
-static inline void
-io_mapping_unmap(void __iomem *vaddr)
-{
-	iounmap(vaddr);
-}
-
-#else
-
-#include <linux/uaccess.h>
-
-/* this struct isn't actually defined anywhere */
-struct io_mapping;
-
-/* Create the io_mapping object*/
-static inline struct io_mapping *
-io_mapping_create_wc(resource_size_t base, unsigned long size)
-{
-	return (struct io_mapping __force *) ioremap_wc(base, size);
-}
-
-static inline void
-io_mapping_free(struct io_mapping *mapping)
-{
-	iounmap((void __force __iomem *) mapping);
-}
-
-/* Atomic map/unmap */
-static inline void __iomem *
-io_mapping_map_atomic_wc(struct io_mapping *mapping,
-			 unsigned long offset)
-{
-	pagefault_disable();
-	return ((char __force __iomem *) mapping) + offset;
-}
-
-static inline void
-io_mapping_unmap_atomic(void __iomem *vaddr)
-{
-	pagefault_enable();
-}
-
-/* Non-atomic map/unmap */
-static inline void __iomem *
-io_mapping_map_wc(struct io_mapping *mapping, unsigned long offset)
-{
-	return ((char __force __iomem *) mapping) + offset;
-}
-
-static inline void
-io_mapping_unmap(void __iomem *vaddr)
-{
-}
-
-#endif /* HAVE_ATOMIC_IOMAP */
-
-#endif /* _LINUX_IO_MAPPING_H */
diff --git a/ANDROID_3.4.5/include/linux/io.h b/ANDROID_3.4.5/include/linux/io.h
deleted file mode 100644
index 7fd2d213..00000000
--- a/ANDROID_3.4.5/include/linux/io.h
+++ /dev/null
@@ -1,70 +0,0 @@
-/*
- * Copyright 2006 PathScale, Inc.  All Rights Reserved.
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of version 2 of the GNU General Public License
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software Foundation,
- * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301, USA.
- */
-
-#ifndef _LINUX_IO_H
-#define _LINUX_IO_H
-
-#include <linux/types.h>
-#include <asm/io.h>
-#include <asm/page.h>
-
-struct device;
-
-void __iowrite32_copy(void __iomem *to, const void *from, size_t count);
-void __iowrite64_copy(void __iomem *to, const void *from, size_t count);
-
-#ifdef CONFIG_MMU
-int ioremap_page_range(unsigned long addr, unsigned long end,
-		       phys_addr_t phys_addr, pgprot_t prot);
-#else
-static inline int ioremap_page_range(unsigned long addr, unsigned long end,
-				     phys_addr_t phys_addr, pgprot_t prot)
-{
-	return 0;
-}
-#endif
-
-/*
- * Managed iomap interface
- */
-#ifdef CONFIG_HAS_IOPORT
-void __iomem * devm_ioport_map(struct device *dev, unsigned long port,
-			       unsigned int nr);
-void devm_ioport_unmap(struct device *dev, void __iomem *addr);
-#else
-static inline void __iomem *devm_ioport_map(struct device *dev,
-					     unsigned long port,
-					     unsigned int nr)
-{
-	return NULL;
-}
-
-static inline void devm_ioport_unmap(struct device *dev, void __iomem *addr)
-{
-}
-#endif
-
-void __iomem *devm_ioremap(struct device *dev, resource_size_t offset,
-			    unsigned long size);
-void __iomem *devm_ioremap_nocache(struct device *dev, resource_size_t offset,
-				    unsigned long size);
-void devm_iounmap(struct device *dev, void __iomem *addr);
-int check_signature(const volatile void __iomem *io_addr,
-			const unsigned char *signature, int length);
-void devm_ioremap_release(struct device *dev, void *res);
-
-#endif /* _LINUX_IO_H */
diff --git a/ANDROID_3.4.5/include/linux/ioc3.h b/ANDROID_3.4.5/include/linux/ioc3.h
deleted file mode 100644
index 38b286e9..00000000
--- a/ANDROID_3.4.5/include/linux/ioc3.h
+++ /dev/null
@@ -1,93 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (c) 2005 Stanislaw Skowronek <skylark@linux-mips.org>
- */
-
-#ifndef _LINUX_IOC3_H
-#define _LINUX_IOC3_H
-
-#include <asm/sn/ioc3.h>
-
-#define IOC3_MAX_SUBMODULES	32
-
-#define IOC3_CLASS_NONE		0
-#define IOC3_CLASS_BASE_IP27	1
-#define IOC3_CLASS_BASE_IP30	2
-#define IOC3_CLASS_MENET_123	3
-#define IOC3_CLASS_MENET_4	4
-#define IOC3_CLASS_CADDUO	5
-#define IOC3_CLASS_SERIAL	6
-
-/* One of these per IOC3 */
-struct ioc3_driver_data {
-	struct list_head list;
-	int id;				/* IOC3 sequence number */
-	/* PCI mapping */
-	unsigned long pma;		/* physical address */
-	struct ioc3 __iomem *vma;	/* pointer to registers */
-	struct pci_dev *pdev;		/* PCI device */
-	/* IRQ stuff */
-	int dual_irq;			/* set if separate IRQs are used */
-	int irq_io, irq_eth;		/* IRQ numbers */
-	/* GPIO magic */
-	spinlock_t gpio_lock;
-	unsigned int gpdr_shadow;
-	/* NIC identifiers */
-	char nic_part[32];
-	char nic_serial[16];
-	char nic_mac[6];
-	/* submodule set */
-	int class;
-	void *data[IOC3_MAX_SUBMODULES];	/* for submodule use */
-	int active[IOC3_MAX_SUBMODULES];	/* set if probe succeeds */
-	/* is_ir_lock must be held while
-	 * modifying sio_ie values, so
-	 * we can be sure that sio_ie is
-	 * not changing when we read it
-	 * along with sio_ir.
-	 */
-	spinlock_t ir_lock;	/* SIO_IE[SC] mod lock */
-};
-
-/* One per submodule */
-struct ioc3_submodule {
-	char *name;		/* descriptive submodule name */
-	struct module *owner;	/* owning kernel module */
-	int ethernet;		/* set for ethernet drivers */
-	int (*probe) (struct ioc3_submodule *, struct ioc3_driver_data *);
-	int (*remove) (struct ioc3_submodule *, struct ioc3_driver_data *);
-	int id;			/* assigned by IOC3, index for the "data" array */
-	/* IRQ stuff */
-	unsigned int irq_mask;	/* IOC3 IRQ mask, leave clear for Ethernet */
-	int reset_mask;		/* non-zero if you want the ioc3.c module to reset interrupts */
-	int (*intr) (struct ioc3_submodule *, struct ioc3_driver_data *, unsigned int);
-	/* private submodule data */
-	void *data;		/* assigned by submodule */
-};
-
-/**********************************
- * Functions needed by submodules *
- **********************************/
-
-#define IOC3_W_IES		0
-#define IOC3_W_IEC		1
-
-/* registers a submodule for all existing and future IOC3 chips */
-extern int ioc3_register_submodule(struct ioc3_submodule *);
-/* unregisters a submodule */
-extern void ioc3_unregister_submodule(struct ioc3_submodule *);
-/* enables IRQs indicated by irq_mask for a specified IOC3 chip */
-extern void ioc3_enable(struct ioc3_submodule *, struct ioc3_driver_data *, unsigned int);
-/* ackowledges specified IRQs */
-extern void ioc3_ack(struct ioc3_submodule *, struct ioc3_driver_data *, unsigned int);
-/* disables IRQs indicated by irq_mask for a specified IOC3 chip */
-extern void ioc3_disable(struct ioc3_submodule *, struct ioc3_driver_data *, unsigned int);
-/* atomically sets GPCR bits */
-extern void ioc3_gpcr_set(struct ioc3_driver_data *, unsigned int);
-/* general ireg writer */
-extern void ioc3_write_ireg(struct ioc3_driver_data *idd, uint32_t value, int reg);
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/ioc4.h b/ANDROID_3.4.5/include/linux/ioc4.h
deleted file mode 100644
index 51e2b9fb..00000000
--- a/ANDROID_3.4.5/include/linux/ioc4.h
+++ /dev/null
@@ -1,184 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (c) 2005 Silicon Graphics, Inc.  All Rights Reserved.
- */
-
-#ifndef _LINUX_IOC4_H
-#define _LINUX_IOC4_H
-
-#include <linux/interrupt.h>
-
-/***************
- * Definitions *
- ***************/
-
-/* Miscellaneous values inherent to hardware */
-
-#define IOC4_EXTINT_COUNT_DIVISOR 520	/* PCI clocks per COUNT tick */
-
-/***********************************
- * Structures needed by subdrivers *
- ***********************************/
-
-/* This structure fully describes the IOC4 miscellaneous registers which
- * appear at bar[0]+0x00000 through bar[0]+0x0005c.  The corresponding
- * PCI resource is managed by the main IOC4 driver because it contains
- * registers of interest to many different IOC4 subdrivers.
- */
-struct ioc4_misc_regs {
-	/* Miscellaneous IOC4 registers */
-	union ioc4_pci_err_addr_l {
-		uint32_t raw;
-		struct {
-			uint32_t valid:1;	/* Address captured */
-			uint32_t master_id:4;	/* Unit causing error
-						 * 0/1: Serial port 0 TX/RX
-						 * 2/3: Serial port 1 TX/RX
-						 * 4/5: Serial port 2 TX/RX
-						 * 6/7: Serial port 3 TX/RX
-						 * 8: ATA/ATAPI
-						 * 9-15: Undefined
-						 */
-			uint32_t mul_err:1;	/* Multiple errors occurred */
-			uint32_t addr:26;	/* Bits 31-6 of error addr */
-		} fields;
-	} pci_err_addr_l;
-	uint32_t pci_err_addr_h;	/* Bits 63-32 of error addr */
-	union ioc4_sio_int {
-		uint32_t raw;
-		struct {
-			uint8_t tx_mt:1;	/* TX ring buffer empty */
-			uint8_t rx_full:1;	/* RX ring buffer full */
-			uint8_t rx_high:1;	/* RX high-water exceeded */
-			uint8_t rx_timer:1;	/* RX timer has triggered */
-			uint8_t delta_dcd:1;	/* DELTA_DCD seen */
-			uint8_t delta_cts:1;	/* DELTA_CTS seen */
-			uint8_t intr_pass:1;	/* Interrupt pass-through */
-			uint8_t tx_explicit:1;	/* TX, MCW, or delay complete */
-		} fields[4];
-	} sio_ir;		/* Serial interrupt state */
-	union ioc4_other_int {
-		uint32_t raw;
-		struct {
-			uint32_t ata_int:1;	/* ATA port passthru */
-			uint32_t ata_memerr:1;	/* ATA halted by mem error */
-			uint32_t memerr:4;	/* Serial halted by mem err */
-			uint32_t kbd_int:1;	/* kbd/mouse intr asserted */
-			uint32_t reserved:16;	/* zero */
-			uint32_t rt_int:1;	/* INT_OUT section latch */
-			uint32_t gen_int:8;	/* Intr. from generic pins */
-		} fields;
-	} other_ir;		/* Other interrupt state */
-	union ioc4_sio_int sio_ies;	/* Serial interrupt enable set */
-	union ioc4_other_int other_ies;	/* Other interrupt enable set */
-	union ioc4_sio_int sio_iec;	/* Serial interrupt enable clear */
-	union ioc4_other_int other_iec;	/* Other interrupt enable clear */
-	union ioc4_sio_cr {
-		uint32_t raw;
-		struct {
-			uint32_t cmd_pulse:4;	/* Bytebus strobe width */
-			uint32_t arb_diag:3;	/* PCI bus requester */
-			uint32_t sio_diag_idle:1;	/* Active ser req? */
-			uint32_t ata_diag_idle:1;	/* Active ATA req? */
-			uint32_t ata_diag_active:1;	/* ATA req is winner */
-			uint32_t reserved:22;	/* zero */
-		} fields;
-	} sio_cr;
-	uint32_t unused1;
-	union ioc4_int_out {
-		uint32_t raw;
-		struct {
-			uint32_t count:16;	/* Period control */
-			uint32_t mode:3;	/* Output signal shape */
-			uint32_t reserved:11;	/* zero */
-			uint32_t diag:1;	/* Timebase control */
-			uint32_t int_out:1;	/* Current value */
-		} fields;
-	} int_out;		/* External interrupt output control */
-	uint32_t unused2;
-	union ioc4_gpcr {
-		uint32_t raw;
-		struct {
-			uint32_t dir:8;	/* Pin direction */
-			uint32_t edge:8;	/* Edge/level mode */
-			uint32_t reserved1:4;	/* zero */
-			uint32_t int_out_en:1;	/* INT_OUT enable */
-			uint32_t reserved2:11;	/* zero */
-		} fields;
-	} gpcr_s;		/* Generic PIO control set */
-	union ioc4_gpcr gpcr_c;	/* Generic PIO control clear */
-	union ioc4_gpdr {
-		uint32_t raw;
-		struct {
-			uint32_t gen_pin:8;	/* State of pins */
-			uint32_t reserved:24;
-		} fields;
-	} gpdr;			/* Generic PIO data */
-	uint32_t unused3;
-	union ioc4_gppr {
-		uint32_t raw;
-		struct {
-			uint32_t gen_pin:1;	/* Single pin state */
-			uint32_t reserved:31;
-		} fields;
-	} gppr[8];		/* Generic PIO pins */
-};
-
-/* Masks for GPCR DIR pins */
-#define IOC4_GPCR_DIR_0 0x01	/* External interrupt output */
-#define IOC4_GPCR_DIR_1 0x02	/* External interrupt input */
-#define IOC4_GPCR_DIR_2 0x04
-#define IOC4_GPCR_DIR_3 0x08	/* Keyboard/mouse presence */
-#define IOC4_GPCR_DIR_4 0x10	/* Ser. port 0 xcvr select (0=232, 1=422) */
-#define IOC4_GPCR_DIR_5 0x20	/* Ser. port 1 xcvr select (0=232, 1=422) */
-#define IOC4_GPCR_DIR_6 0x40	/* Ser. port 2 xcvr select (0=232, 1=422) */
-#define IOC4_GPCR_DIR_7 0x80	/* Ser. port 3 xcvr select (0=232, 1=422) */
-
-/* Masks for GPCR EDGE pins */
-#define IOC4_GPCR_EDGE_0 0x01
-#define IOC4_GPCR_EDGE_1 0x02	/* External interrupt input */
-#define IOC4_GPCR_EDGE_2 0x04
-#define IOC4_GPCR_EDGE_3 0x08
-#define IOC4_GPCR_EDGE_4 0x10
-#define IOC4_GPCR_EDGE_5 0x20
-#define IOC4_GPCR_EDGE_6 0x40
-#define IOC4_GPCR_EDGE_7 0x80
-
-#define IOC4_VARIANT_IO9	0x0900
-#define IOC4_VARIANT_PCI_RT	0x0901
-#define IOC4_VARIANT_IO10	0x1000
-
-/* One of these per IOC4 */
-struct ioc4_driver_data {
-	struct list_head idd_list;
-	unsigned long idd_bar0;
-	struct pci_dev *idd_pdev;
-	const struct pci_device_id *idd_pci_id;
-	struct ioc4_misc_regs __iomem *idd_misc_regs;
-	unsigned long count_period;
-	void *idd_serial_data;
-	unsigned int idd_variant;
-};
-
-/* One per submodule */
-struct ioc4_submodule {
-	struct list_head is_list;
-	char *is_name;
-	struct module *is_owner;
-	int (*is_probe) (struct ioc4_driver_data *);
-	int (*is_remove) (struct ioc4_driver_data *);
-};
-
-#define IOC4_NUM_CARDS		8	/* max cards per partition */
-
-/**********************************
- * Functions needed by submodules *
- **********************************/
-
-extern int ioc4_register_submodule(struct ioc4_submodule *);
-extern void ioc4_unregister_submodule(struct ioc4_submodule *);
-
-#endif				/* _LINUX_IOC4_H */
diff --git a/ANDROID_3.4.5/include/linux/iocontext.h b/ANDROID_3.4.5/include/linux/iocontext.h
deleted file mode 100644
index 1a301806..00000000
--- a/ANDROID_3.4.5/include/linux/iocontext.h
+++ /dev/null
@@ -1,152 +0,0 @@
-#ifndef IOCONTEXT_H
-#define IOCONTEXT_H
-
-#include <linux/radix-tree.h>
-#include <linux/rcupdate.h>
-#include <linux/workqueue.h>
-
-enum {
-	ICQ_IOPRIO_CHANGED	= 1 << 0,
-	ICQ_CGROUP_CHANGED	= 1 << 1,
-	ICQ_EXITED		= 1 << 2,
-
-	ICQ_CHANGED_MASK	= ICQ_IOPRIO_CHANGED | ICQ_CGROUP_CHANGED,
-};
-
-/*
- * An io_cq (icq) is association between an io_context (ioc) and a
- * request_queue (q).  This is used by elevators which need to track
- * information per ioc - q pair.
- *
- * Elevator can request use of icq by setting elevator_type->icq_size and
- * ->icq_align.  Both size and align must be larger than that of struct
- * io_cq and elevator can use the tail area for private information.  The
- * recommended way to do this is defining a struct which contains io_cq as
- * the first member followed by private members and using its size and
- * align.  For example,
- *
- *	struct snail_io_cq {
- *		struct io_cq	icq;
- *		int		poke_snail;
- *		int		feed_snail;
- *	};
- *
- *	struct elevator_type snail_elv_type {
- *		.ops =		{ ... },
- *		.icq_size =	sizeof(struct snail_io_cq),
- *		.icq_align =	__alignof__(struct snail_io_cq),
- *		...
- *	};
- *
- * If icq_size is set, block core will manage icq's.  All requests will
- * have its ->elv.icq field set before elevator_ops->elevator_set_req_fn()
- * is called and be holding a reference to the associated io_context.
- *
- * Whenever a new icq is created, elevator_ops->elevator_init_icq_fn() is
- * called and, on destruction, ->elevator_exit_icq_fn().  Both functions
- * are called with both the associated io_context and queue locks held.
- *
- * Elevator is allowed to lookup icq using ioc_lookup_icq() while holding
- * queue lock but the returned icq is valid only until the queue lock is
- * released.  Elevators can not and should not try to create or destroy
- * icq's.
- *
- * As icq's are linked from both ioc and q, the locking rules are a bit
- * complex.
- *
- * - ioc lock nests inside q lock.
- *
- * - ioc->icq_list and icq->ioc_node are protected by ioc lock.
- *   q->icq_list and icq->q_node by q lock.
- *
- * - ioc->icq_tree and ioc->icq_hint are protected by ioc lock, while icq
- *   itself is protected by q lock.  However, both the indexes and icq
- *   itself are also RCU managed and lookup can be performed holding only
- *   the q lock.
- *
- * - icq's are not reference counted.  They are destroyed when either the
- *   ioc or q goes away.  Each request with icq set holds an extra
- *   reference to ioc to ensure it stays until the request is completed.
- *
- * - Linking and unlinking icq's are performed while holding both ioc and q
- *   locks.  Due to the lock ordering, q exit is simple but ioc exit
- *   requires reverse-order double lock dance.
- */
-struct io_cq {
-	struct request_queue	*q;
-	struct io_context	*ioc;
-
-	/*
-	 * q_node and ioc_node link io_cq through icq_list of q and ioc
-	 * respectively.  Both fields are unused once ioc_exit_icq() is
-	 * called and shared with __rcu_icq_cache and __rcu_head which are
-	 * used for RCU free of io_cq.
-	 */
-	union {
-		struct list_head	q_node;
-		struct kmem_cache	*__rcu_icq_cache;
-	};
-	union {
-		struct hlist_node	ioc_node;
-		struct rcu_head		__rcu_head;
-	};
-
-	unsigned int		flags;
-};
-
-/*
- * I/O subsystem state of the associated processes.  It is refcounted
- * and kmalloc'ed. These could be shared between processes.
- */
-struct io_context {
-	atomic_long_t refcount;
-	atomic_t nr_tasks;
-
-	/* all the fields below are protected by this lock */
-	spinlock_t lock;
-
-	unsigned short ioprio;
-
-	/*
-	 * For request batching
-	 */
-	int nr_batch_requests;     /* Number of requests left in the batch */
-	unsigned long last_waited; /* Time last woken after wait for request */
-
-	struct radix_tree_root	icq_tree;
-	struct io_cq __rcu	*icq_hint;
-	struct hlist_head	icq_list;
-
-	struct work_struct release_work;
-};
-
-static inline struct io_context *ioc_task_link(struct io_context *ioc)
-{
-	/*
-	 * if ref count is zero, don't allow sharing (ioc is going away, it's
-	 * a race).
-	 */
-	if (ioc && atomic_long_inc_not_zero(&ioc->refcount)) {
-		atomic_inc(&ioc->nr_tasks);
-		return ioc;
-	}
-
-	return NULL;
-}
-
-struct task_struct;
-#ifdef CONFIG_BLOCK
-void put_io_context(struct io_context *ioc);
-void exit_io_context(struct task_struct *task);
-struct io_context *get_task_io_context(struct task_struct *task,
-				       gfp_t gfp_flags, int node);
-void ioc_ioprio_changed(struct io_context *ioc, int ioprio);
-void ioc_cgroup_changed(struct io_context *ioc);
-unsigned int icq_get_changed(struct io_cq *icq);
-#else
-struct io_context;
-static inline void put_io_context(struct io_context *ioc) { }
-static inline void exit_io_context(struct task_struct *task) { }
-#endif
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/ioctl.h b/ANDROID_3.4.5/include/linux/ioctl.h
deleted file mode 100644
index aa91eb39..00000000
--- a/ANDROID_3.4.5/include/linux/ioctl.h
+++ /dev/null
@@ -1,7 +0,0 @@
-#ifndef _LINUX_IOCTL_H
-#define _LINUX_IOCTL_H
-
-#include <asm/ioctl.h>
-
-#endif /* _LINUX_IOCTL_H */
-
diff --git a/ANDROID_3.4.5/include/linux/iommu-helper.h b/ANDROID_3.4.5/include/linux/iommu-helper.h
deleted file mode 100644
index 86bdeffe..00000000
--- a/ANDROID_3.4.5/include/linux/iommu-helper.h
+++ /dev/null
@@ -1,34 +0,0 @@
-#ifndef _LINUX_IOMMU_HELPER_H
-#define _LINUX_IOMMU_HELPER_H
-
-#include <linux/kernel.h>
-
-static inline unsigned long iommu_device_max_index(unsigned long size,
-						   unsigned long offset,
-						   u64 dma_mask)
-{
-	if (size + offset > dma_mask)
-		return dma_mask - offset + 1;
-	else
-		return size;
-}
-
-extern int iommu_is_span_boundary(unsigned int index, unsigned int nr,
-				  unsigned long shift,
-				  unsigned long boundary_size);
-extern unsigned long iommu_area_alloc(unsigned long *map, unsigned long size,
-				      unsigned long start, unsigned int nr,
-				      unsigned long shift,
-				      unsigned long boundary_size,
-				      unsigned long align_mask);
-
-static inline unsigned long iommu_num_pages(unsigned long addr,
-					    unsigned long len,
-					    unsigned long io_page_size)
-{
-	unsigned long size = (addr & (io_page_size - 1)) + len;
-
-	return DIV_ROUND_UP(size, io_page_size);
-}
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/iommu.h b/ANDROID_3.4.5/include/linux/iommu.h
deleted file mode 100644
index d9375804..00000000
--- a/ANDROID_3.4.5/include/linux/iommu.h
+++ /dev/null
@@ -1,205 +0,0 @@
-/*
- * Copyright (C) 2007-2008 Advanced Micro Devices, Inc.
- * Author: Joerg Roedel <joerg.roedel@amd.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
- */
-
-#ifndef __LINUX_IOMMU_H
-#define __LINUX_IOMMU_H
-
-#include <linux/errno.h>
-
-#define IOMMU_READ	(1)
-#define IOMMU_WRITE	(2)
-#define IOMMU_CACHE	(4) /* DMA cache coherency */
-
-struct iommu_ops;
-struct bus_type;
-struct device;
-struct iommu_domain;
-
-/* iommu fault flags */
-#define IOMMU_FAULT_READ	0x0
-#define IOMMU_FAULT_WRITE	0x1
-
-typedef int (*iommu_fault_handler_t)(struct iommu_domain *,
-				struct device *, unsigned long, int);
-
-struct iommu_domain {
-	struct iommu_ops *ops;
-	void *priv;
-	iommu_fault_handler_t handler;
-};
-
-#define IOMMU_CAP_CACHE_COHERENCY	0x1
-#define IOMMU_CAP_INTR_REMAP		0x2	/* isolates device intrs */
-
-#ifdef CONFIG_IOMMU_API
-
-/**
- * struct iommu_ops - iommu ops and capabilities
- * @domain_init: init iommu domain
- * @domain_destroy: destroy iommu domain
- * @attach_dev: attach device to an iommu domain
- * @detach_dev: detach device from an iommu domain
- * @map: map a physically contiguous memory region to an iommu domain
- * @unmap: unmap a physically contiguous memory region from an iommu domain
- * @iova_to_phys: translate iova to physical address
- * @domain_has_cap: domain capabilities query
- * @commit: commit iommu domain
- * @pgsize_bitmap: bitmap of supported page sizes
- */
-struct iommu_ops {
-	int (*domain_init)(struct iommu_domain *domain);
-	void (*domain_destroy)(struct iommu_domain *domain);
-	int (*attach_dev)(struct iommu_domain *domain, struct device *dev);
-	void (*detach_dev)(struct iommu_domain *domain, struct device *dev);
-	int (*map)(struct iommu_domain *domain, unsigned long iova,
-		   phys_addr_t paddr, size_t size, int prot);
-	size_t (*unmap)(struct iommu_domain *domain, unsigned long iova,
-		     size_t size);
-	phys_addr_t (*iova_to_phys)(struct iommu_domain *domain,
-				    unsigned long iova);
-	int (*domain_has_cap)(struct iommu_domain *domain,
-			      unsigned long cap);
-	int (*device_group)(struct device *dev, unsigned int *groupid);
-	unsigned long pgsize_bitmap;
-};
-
-extern int bus_set_iommu(struct bus_type *bus, struct iommu_ops *ops);
-extern bool iommu_present(struct bus_type *bus);
-extern struct iommu_domain *iommu_domain_alloc(struct bus_type *bus);
-extern void iommu_domain_free(struct iommu_domain *domain);
-extern int iommu_attach_device(struct iommu_domain *domain,
-			       struct device *dev);
-extern void iommu_detach_device(struct iommu_domain *domain,
-				struct device *dev);
-extern int iommu_map(struct iommu_domain *domain, unsigned long iova,
-		     phys_addr_t paddr, size_t size, int prot);
-extern size_t iommu_unmap(struct iommu_domain *domain, unsigned long iova,
-		       size_t size);
-extern phys_addr_t iommu_iova_to_phys(struct iommu_domain *domain,
-				      unsigned long iova);
-extern int iommu_domain_has_cap(struct iommu_domain *domain,
-				unsigned long cap);
-extern void iommu_set_fault_handler(struct iommu_domain *domain,
-					iommu_fault_handler_t handler);
-extern int iommu_device_group(struct device *dev, unsigned int *groupid);
-
-/**
- * report_iommu_fault() - report about an IOMMU fault to the IOMMU framework
- * @domain: the iommu domain where the fault has happened
- * @dev: the device where the fault has happened
- * @iova: the faulting address
- * @flags: mmu fault flags (e.g. IOMMU_FAULT_READ/IOMMU_FAULT_WRITE/...)
- *
- * This function should be called by the low-level IOMMU implementations
- * whenever IOMMU faults happen, to allow high-level users, that are
- * interested in such events, to know about them.
- *
- * This event may be useful for several possible use cases:
- * - mere logging of the event
- * - dynamic TLB/PTE loading
- * - if restarting of the faulting device is required
- *
- * Returns 0 on success and an appropriate error code otherwise (if dynamic
- * PTE/TLB loading will one day be supported, implementations will be able
- * to tell whether it succeeded or not according to this return value).
- *
- * Specifically, -ENOSYS is returned if a fault handler isn't installed
- * (though fault handlers can also return -ENOSYS, in case they want to
- * elicit the default behavior of the IOMMU drivers).
- */
-static inline int report_iommu_fault(struct iommu_domain *domain,
-		struct device *dev, unsigned long iova, int flags)
-{
-	int ret = -ENOSYS;
-
-	/*
-	 * if upper layers showed interest and installed a fault handler,
-	 * invoke it.
-	 */
-	if (domain->handler)
-		ret = domain->handler(domain, dev, iova, flags);
-
-	return ret;
-}
-
-#else /* CONFIG_IOMMU_API */
-
-struct iommu_ops {};
-
-static inline bool iommu_present(struct bus_type *bus)
-{
-	return false;
-}
-
-static inline struct iommu_domain *iommu_domain_alloc(struct bus_type *bus)
-{
-	return NULL;
-}
-
-static inline void iommu_domain_free(struct iommu_domain *domain)
-{
-}
-
-static inline int iommu_attach_device(struct iommu_domain *domain,
-				      struct device *dev)
-{
-	return -ENODEV;
-}
-
-static inline void iommu_detach_device(struct iommu_domain *domain,
-				       struct device *dev)
-{
-}
-
-static inline int iommu_map(struct iommu_domain *domain, unsigned long iova,
-			    phys_addr_t paddr, int gfp_order, int prot)
-{
-	return -ENODEV;
-}
-
-static inline int iommu_unmap(struct iommu_domain *domain, unsigned long iova,
-			      int gfp_order)
-{
-	return -ENODEV;
-}
-
-static inline phys_addr_t iommu_iova_to_phys(struct iommu_domain *domain,
-					     unsigned long iova)
-{
-	return 0;
-}
-
-static inline int domain_has_cap(struct iommu_domain *domain,
-				 unsigned long cap)
-{
-	return 0;
-}
-
-static inline void iommu_set_fault_handler(struct iommu_domain *domain,
-					iommu_fault_handler_t handler)
-{
-}
-
-static inline int iommu_device_group(struct device *dev, unsigned int *groupid)
-{
-	return -ENODEV;
-}
-
-#endif /* CONFIG_IOMMU_API */
-
-#endif /* __LINUX_IOMMU_H */
diff --git a/ANDROID_3.4.5/include/linux/ion.h b/ANDROID_3.4.5/include/linux/ion.h
deleted file mode 100644
index a7d399c4..00000000
--- a/ANDROID_3.4.5/include/linux/ion.h
+++ /dev/null
@@ -1,356 +0,0 @@
-/*
- * include/linux/ion.h
- *
- * Copyright (C) 2011 Google, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef _LINUX_ION_H
-#define _LINUX_ION_H
-
-#include <linux/types.h>
-
-struct ion_handle;
-/**
- * enum ion_heap_types - list of all possible types of heaps
- * @ION_HEAP_TYPE_SYSTEM:	 memory allocated via vmalloc
- * @ION_HEAP_TYPE_SYSTEM_CONTIG: memory allocated via kmalloc
- * @ION_HEAP_TYPE_CARVEOUT:	 memory allocated from a prereserved
- * 				 carveout heap, allocations are physically
- * 				 contiguous
- * @ION_NUM_HEAPS:		 helper for iterating over heaps, a bit mask
- * 				 is used to identify the heaps, so only 32
- * 				 total heap types are supported
- */
-enum ion_heap_type {
-	ION_HEAP_TYPE_SYSTEM,
-	ION_HEAP_TYPE_SYSTEM_CONTIG,
-	ION_HEAP_TYPE_CARVEOUT,
-	ION_HEAP_TYPE_CUSTOM, /* must be last so device specific heaps always
-				 are at the end of this enum */
-	ION_NUM_HEAPS = 16,
-};
-
-#define ION_HEAP_SYSTEM_MASK		(1 << ION_HEAP_TYPE_SYSTEM)
-#define ION_HEAP_SYSTEM_CONTIG_MASK	(1 << ION_HEAP_TYPE_SYSTEM_CONTIG)
-#define ION_HEAP_CARVEOUT_MASK		(1 << ION_HEAP_TYPE_CARVEOUT)
-
-/**
- * heap flags - the lower 16 bits are used by core ion, the upper 16
- * bits are reserved for use by the heaps themselves.
- */
-#define ION_FLAG_CACHED 1		/* mappings of this buffer should be
-					   cached, ion will do cache
-					   maintenance when the buffer is
-					   mapped for dma */
-#define ION_FLAG_CACHED_NEEDS_SYNC 2	/* mappings of this buffer will created
-					   at mmap time, if this is set
-					   caches must be managed manually */
-
-#ifdef __KERNEL__
-struct ion_device;
-struct ion_heap;
-struct ion_mapper;
-struct ion_client;
-struct ion_buffer;
-
-/* This should be removed some day when phys_addr_t's are fully
-   plumbed in the kernel, and all instances of ion_phys_addr_t should
-   be converted to phys_addr_t.  For the time being many kernel interfaces
-   do not accept phys_addr_t's that would have to */
-#define ion_phys_addr_t unsigned long
-
-/**
- * struct ion_platform_heap - defines a heap in the given platform
- * @type:	type of the heap from ion_heap_type enum
- * @id:		unique identifier for heap.  When allocating (lower numbers 
- * 		will be allocated from first)
- * @name:	used for debug purposes
- * @base:	base address of heap in physical memory if applicable
- * @size:	size of the heap in bytes if applicable
- *
- * Provided by the board file.
- */
-struct ion_platform_heap {
-	enum ion_heap_type type;
-	unsigned int id;
-	const char *name;
-	ion_phys_addr_t base;
-	size_t size;
-};
-
-/**
- * struct ion_platform_data - array of platform heaps passed from board file
- * @nr:		number of structures in the array
- * @heaps:	array of platform_heap structions
- *
- * Provided by the board file in the form of platform data to a platform device.
- */
-struct ion_platform_data {
-	int nr;
-	struct ion_platform_heap heaps[];
-};
-
-/**
- * ion_reserve() - reserve memory for ion heaps if applicable
- * @data:	platform data specifying starting physical address and
- *		size
- *
- * Calls memblock reserve to set aside memory for heaps that are
- * located at specific memory addresses or of specfic sizes not
- * managed by the kernel
- */
-void ion_reserve(struct ion_platform_data *data);
-
-/**
- * ion_client_create() -  allocate a client and returns it
- * @dev:	the global ion device
- * @heap_mask:	mask of heaps this client can allocate from
- * @name:	used for debugging
- */
-struct ion_client *ion_client_create(struct ion_device *dev,
-				     unsigned int heap_mask, const char *name);
-
-/**
- * ion_client_destroy() -  free's a client and all it's handles
- * @client:	the client
- *
- * Free the provided client and all it's resources including
- * any handles it is holding.
- */
-void ion_client_destroy(struct ion_client *client);
-
-/**
- * ion_alloc - allocate ion memory
- * @client:	the client
- * @len:	size of the allocation
- * @align:	requested allocation alignment, lots of hardware blocks have
- *		alignment requirements of some kind
- * @heap_mask:	mask of heaps to allocate from, if multiple bits are set
- *		heaps will be tried in order from lowest to highest order bit
- * @flags:	heap flags, the low 16 bits are consumed by ion, the high 16
- *		bits are passed on to the respective heap and can be heap
- * 		custom
- *
- * Allocate memory in one of the heaps provided in heap mask and return
- * an opaque handle to it.
- */
-struct ion_handle *ion_alloc(struct ion_client *client, size_t len,
-			     size_t align, unsigned int heap_mask,
-			     unsigned int flags);
-
-/**
- * ion_free - free a handle
- * @client:	the client
- * @handle:	the handle to free
- *
- * Free the provided handle.
- */
-void ion_free(struct ion_client *client, struct ion_handle *handle);
-
-/**
- * ion_phys - returns the physical address and len of a handle
- * @client:	the client
- * @handle:	the handle
- * @addr:	a pointer to put the address in
- * @len:	a pointer to put the length in
- *
- * This function queries the heap for a particular handle to get the
- * handle's physical address.  It't output is only correct if
- * a heap returns physically contiguous memory -- in other cases
- * this api should not be implemented -- ion_sg_table should be used
- * instead.  Returns -EINVAL if the handle is invalid.  This has
- * no implications on the reference counting of the handle --
- * the returned value may not be valid if the caller is not
- * holding a reference.
- */
-int ion_phys(struct ion_client *client, struct ion_handle *handle,
-	     ion_phys_addr_t *addr, size_t *len);
-
-/**
- * ion_map_dma - return an sg_table describing a handle
- * @client:	the client
- * @handle:	the handle
- *
- * This function returns the sg_table describing
- * a particular ion handle.
- */
-struct sg_table *ion_sg_table(struct ion_client *client,
-			      struct ion_handle *handle);
-
-/**
- * ion_map_kernel - create mapping for the given handle
- * @client:	the client
- * @handle:	handle to map
- *
- * Map the given handle into the kernel and return a kernel address that
- * can be used to access this address.
- */
-void *ion_map_kernel(struct ion_client *client, struct ion_handle *handle);
-
-/**
- * ion_unmap_kernel() - destroy a kernel mapping for a handle
- * @client:	the client
- * @handle:	handle to unmap
- */
-void ion_unmap_kernel(struct ion_client *client, struct ion_handle *handle);
-
-/**
- * ion_share_dma_buf() - given an ion client, create a dma-buf fd
- * @client:	the client
- * @handle:	the handle
- */
-int ion_share_dma_buf(struct ion_client *client, struct ion_handle *handle);
-
-/**
- * ion_import_dma_buf() - given an dma-buf fd from the ion exporter get handle
- * @client:	the client
- * @fd:		the dma-buf fd
- *
- * Given an dma-buf fd that was allocated through ion via ion_share_dma_buf,
- * import that fd and return a handle representing it.  If a dma-buf from
- * another exporter is passed in this function will return ERR_PTR(-EINVAL)
- */
-struct ion_handle *ion_import_dma_buf(struct ion_client *client, int fd);
-
-#endif /* __KERNEL__ */
-
-/**
- * DOC: Ion Userspace API
- *
- * create a client by opening /dev/ion
- * most operations handled via following ioctls
- *
- */
-
-/**
- * struct ion_allocation_data - metadata passed from userspace for allocations
- * @len:	size of the allocation
- * @align:	required alignment of the allocation
- * @heap_mask:	mask of heaps to allocate from
- * @flags:	flags passed to heap
- * @handle:	pointer that will be populated with a cookie to use to refer
- *		to this allocation
- *
- * Provided by userspace as an argument to the ioctl
- */
-struct ion_allocation_data {
-	size_t len;
-	size_t align;
-	unsigned int heap_mask;
-	unsigned int flags;
-	struct ion_handle *handle;
-};
-
-/**
- * struct ion_fd_data - metadata passed to/from userspace for a handle/fd pair
- * @handle:	a handle
- * @fd:		a file descriptor representing that handle
- *
- * For ION_IOC_SHARE or ION_IOC_MAP userspace populates the handle field with
- * the handle returned from ion alloc, and the kernel returns the file
- * descriptor to share or map in the fd field.  For ION_IOC_IMPORT, userspace
- * provides the file descriptor and the kernel returns the handle.
- */
-struct ion_fd_data {
-	struct ion_handle *handle;
-	int fd;
-};
-
-/**
- * struct ion_handle_data - a handle passed to/from the kernel
- * @handle:	a handle
- */
-struct ion_handle_data {
-	struct ion_handle *handle;
-};
-
-/**
- * struct ion_custom_data - metadata passed to/from userspace for a custom ioctl
- * @cmd:	the custom ioctl function to call
- * @arg:	additional data to pass to the custom ioctl, typically a user
- *		pointer to a predefined structure
- *
- * This works just like the regular cmd and arg fields of an ioctl.
- */
-struct ion_custom_data {
-	unsigned int cmd;
-	unsigned long arg;
-};
-
-#define ION_IOC_MAGIC		'I'
-
-/**
- * DOC: ION_IOC_ALLOC - allocate memory
- *
- * Takes an ion_allocation_data struct and returns it with the handle field
- * populated with the opaque handle for the allocation.
- */
-#define ION_IOC_ALLOC		_IOWR(ION_IOC_MAGIC, 0, \
-				      struct ion_allocation_data)
-
-/**
- * DOC: ION_IOC_FREE - free memory
- *
- * Takes an ion_handle_data struct and frees the handle.
- */
-#define ION_IOC_FREE		_IOWR(ION_IOC_MAGIC, 1, struct ion_handle_data)
-
-/**
- * DOC: ION_IOC_MAP - get a file descriptor to mmap
- *
- * Takes an ion_fd_data struct with the handle field populated with a valid
- * opaque handle.  Returns the struct with the fd field set to a file
- * descriptor open in the current address space.  This file descriptor
- * can then be used as an argument to mmap.
- */
-#define ION_IOC_MAP		_IOWR(ION_IOC_MAGIC, 2, struct ion_fd_data)
-
-/**
- * DOC: ION_IOC_SHARE - creates a file descriptor to use to share an allocation
- *
- * Takes an ion_fd_data struct with the handle field populated with a valid
- * opaque handle.  Returns the struct with the fd field set to a file
- * descriptor open in the current address space.  This file descriptor
- * can then be passed to another process.  The corresponding opaque handle can
- * be retrieved via ION_IOC_IMPORT.
- */
-#define ION_IOC_SHARE		_IOWR(ION_IOC_MAGIC, 4, struct ion_fd_data)
-
-/**
- * DOC: ION_IOC_IMPORT - imports a shared file descriptor
- *
- * Takes an ion_fd_data struct with the fd field populated with a valid file
- * descriptor obtained from ION_IOC_SHARE and returns the struct with the handle
- * filed set to the corresponding opaque handle.
- */
-#define ION_IOC_IMPORT		_IOWR(ION_IOC_MAGIC, 5, struct ion_fd_data)
-
-/**
- * DOC: ION_IOC_SYNC - syncs a shared file descriptors to memory
- *
- * Deprecated in favor of using the dma_buf api's correctly (syncing
- * will happend automatically when the buffer is mapped to a device).
- * If necessary should be used after touching a cached buffer from the cpu,
- * this will make the buffer in memory coherent.
- */
-#define ION_IOC_SYNC		_IOWR(ION_IOC_MAGIC, 7, struct ion_fd_data)
-
-/**
- * DOC: ION_IOC_CUSTOM - call architecture specific ion ioctl
- *
- * Takes the argument of the architecture specific ioctl to call and
- * passes appropriate userdata for that ioctl
- */
-#define ION_IOC_CUSTOM		_IOWR(ION_IOC_MAGIC, 6, struct ion_custom_data)
-
-#endif /* _LINUX_ION_H */
diff --git a/ANDROID_3.4.5/include/linux/ioport.h b/ANDROID_3.4.5/include/linux/ioport.h
deleted file mode 100644
index e885ba23..00000000
--- a/ANDROID_3.4.5/include/linux/ioport.h
+++ /dev/null
@@ -1,227 +0,0 @@
-/*
- * ioport.h	Definitions of routines for detecting, reserving and
- *		allocating system resources.
- *
- * Authors:	Linus Torvalds
- */
-
-#ifndef _LINUX_IOPORT_H
-#define _LINUX_IOPORT_H
-
-#ifndef __ASSEMBLY__
-#include <linux/compiler.h>
-#include <linux/types.h>
-/*
- * Resources are tree-like, allowing
- * nesting etc..
- */
-struct resource {
-	resource_size_t start;
-	resource_size_t end;
-	const char *name;
-	unsigned long flags;
-	struct resource *parent, *sibling, *child;
-};
-
-/*
- * IO resources have these defined flags.
- */
-#define IORESOURCE_BITS		0x000000ff	/* Bus-specific bits */
-
-#define IORESOURCE_TYPE_BITS	0x00001f00	/* Resource type */
-#define IORESOURCE_IO		0x00000100
-#define IORESOURCE_MEM		0x00000200
-#define IORESOURCE_IRQ		0x00000400
-#define IORESOURCE_DMA		0x00000800
-#define IORESOURCE_BUS		0x00001000
-
-#define IORESOURCE_PREFETCH	0x00002000	/* No side effects */
-#define IORESOURCE_READONLY	0x00004000
-#define IORESOURCE_CACHEABLE	0x00008000
-#define IORESOURCE_RANGELENGTH	0x00010000
-#define IORESOURCE_SHADOWABLE	0x00020000
-
-#define IORESOURCE_SIZEALIGN	0x00040000	/* size indicates alignment */
-#define IORESOURCE_STARTALIGN	0x00080000	/* start field is alignment */
-
-#define IORESOURCE_MEM_64	0x00100000
-#define IORESOURCE_WINDOW	0x00200000	/* forwarded by bridge */
-#define IORESOURCE_MUXED	0x00400000	/* Resource is software muxed */
-
-#define IORESOURCE_EXCLUSIVE	0x08000000	/* Userland may not map this resource */
-#define IORESOURCE_DISABLED	0x10000000
-#define IORESOURCE_UNSET	0x20000000
-#define IORESOURCE_AUTO		0x40000000
-#define IORESOURCE_BUSY		0x80000000	/* Driver has marked this resource busy */
-
-/* PnP IRQ specific bits (IORESOURCE_BITS) */
-#define IORESOURCE_IRQ_HIGHEDGE		(1<<0)
-#define IORESOURCE_IRQ_LOWEDGE		(1<<1)
-#define IORESOURCE_IRQ_HIGHLEVEL	(1<<2)
-#define IORESOURCE_IRQ_LOWLEVEL		(1<<3)
-#define IORESOURCE_IRQ_SHAREABLE	(1<<4)
-#define IORESOURCE_IRQ_OPTIONAL 	(1<<5)
-
-/* PnP DMA specific bits (IORESOURCE_BITS) */
-#define IORESOURCE_DMA_TYPE_MASK	(3<<0)
-#define IORESOURCE_DMA_8BIT		(0<<0)
-#define IORESOURCE_DMA_8AND16BIT	(1<<0)
-#define IORESOURCE_DMA_16BIT		(2<<0)
-
-#define IORESOURCE_DMA_MASTER		(1<<2)
-#define IORESOURCE_DMA_BYTE		(1<<3)
-#define IORESOURCE_DMA_WORD		(1<<4)
-
-#define IORESOURCE_DMA_SPEED_MASK	(3<<6)
-#define IORESOURCE_DMA_COMPATIBLE	(0<<6)
-#define IORESOURCE_DMA_TYPEA		(1<<6)
-#define IORESOURCE_DMA_TYPEB		(2<<6)
-#define IORESOURCE_DMA_TYPEF		(3<<6)
-
-/* PnP memory I/O specific bits (IORESOURCE_BITS) */
-#define IORESOURCE_MEM_WRITEABLE	(1<<0)	/* dup: IORESOURCE_READONLY */
-#define IORESOURCE_MEM_CACHEABLE	(1<<1)	/* dup: IORESOURCE_CACHEABLE */
-#define IORESOURCE_MEM_RANGELENGTH	(1<<2)	/* dup: IORESOURCE_RANGELENGTH */
-#define IORESOURCE_MEM_TYPE_MASK	(3<<3)
-#define IORESOURCE_MEM_8BIT		(0<<3)
-#define IORESOURCE_MEM_16BIT		(1<<3)
-#define IORESOURCE_MEM_8AND16BIT	(2<<3)
-#define IORESOURCE_MEM_32BIT		(3<<3)
-#define IORESOURCE_MEM_SHADOWABLE	(1<<5)	/* dup: IORESOURCE_SHADOWABLE */
-#define IORESOURCE_MEM_EXPANSIONROM	(1<<6)
-
-/* PnP I/O specific bits (IORESOURCE_BITS) */
-#define IORESOURCE_IO_16BIT_ADDR	(1<<0)
-#define IORESOURCE_IO_FIXED		(1<<1)
-
-/* PCI ROM control bits (IORESOURCE_BITS) */
-#define IORESOURCE_ROM_ENABLE		(1<<0)	/* ROM is enabled, same as PCI_ROM_ADDRESS_ENABLE */
-#define IORESOURCE_ROM_SHADOW		(1<<1)	/* ROM is copy at C000:0 */
-#define IORESOURCE_ROM_COPY		(1<<2)	/* ROM is alloc'd copy, resource field overlaid */
-#define IORESOURCE_ROM_BIOS_COPY	(1<<3)	/* ROM is BIOS copy, resource field overlaid */
-
-/* PCI control bits.  Shares IORESOURCE_BITS with above PCI ROM.  */
-#define IORESOURCE_PCI_FIXED		(1<<4)	/* Do not move resource */
-
-
-/* helpers to define resources */
-#define DEFINE_RES_NAMED(_start, _size, _name, _flags)			\
-	{								\
-		.start = (_start),					\
-		.end = (_start) + (_size) - 1,				\
-		.name = (_name),					\
-		.flags = (_flags),					\
-	}
-
-#define DEFINE_RES_IO_NAMED(_start, _size, _name)			\
-	DEFINE_RES_NAMED((_start), (_size), (_name), IORESOURCE_IO)
-#define DEFINE_RES_IO(_start, _size)					\
-	DEFINE_RES_IO_NAMED((_start), (_size), NULL)
-
-#define DEFINE_RES_MEM_NAMED(_start, _size, _name)			\
-	DEFINE_RES_NAMED((_start), (_size), (_name), IORESOURCE_MEM)
-#define DEFINE_RES_MEM(_start, _size)					\
-	DEFINE_RES_MEM_NAMED((_start), (_size), NULL)
-
-#define DEFINE_RES_IRQ_NAMED(_irq, _name)				\
-	DEFINE_RES_NAMED((_irq), 1, (_name), IORESOURCE_IRQ)
-#define DEFINE_RES_IRQ(_irq)						\
-	DEFINE_RES_IRQ_NAMED((_irq), NULL)
-
-#define DEFINE_RES_DMA_NAMED(_dma, _name)				\
-	DEFINE_RES_NAMED((_dma), 1, (_name), IORESOURCE_DMA)
-#define DEFINE_RES_DMA(_dma)						\
-	DEFINE_RES_DMA_NAMED((_dma), NULL)
-
-/* PC/ISA/whatever - the normal PC address spaces: IO and memory */
-extern struct resource ioport_resource;
-extern struct resource iomem_resource;
-
-extern struct resource *request_resource_conflict(struct resource *root, struct resource *new);
-extern int request_resource(struct resource *root, struct resource *new);
-extern int release_resource(struct resource *new);
-void release_child_resources(struct resource *new);
-extern void reserve_region_with_split(struct resource *root,
-			     resource_size_t start, resource_size_t end,
-			     const char *name);
-extern struct resource *insert_resource_conflict(struct resource *parent, struct resource *new);
-extern int insert_resource(struct resource *parent, struct resource *new);
-extern void insert_resource_expand_to_fit(struct resource *root, struct resource *new);
-extern void arch_remove_reservations(struct resource *avail);
-extern int allocate_resource(struct resource *root, struct resource *new,
-			     resource_size_t size, resource_size_t min,
-			     resource_size_t max, resource_size_t align,
-			     resource_size_t (*alignf)(void *,
-						       const struct resource *,
-						       resource_size_t,
-						       resource_size_t),
-			     void *alignf_data);
-struct resource *lookup_resource(struct resource *root, resource_size_t start);
-int adjust_resource(struct resource *res, resource_size_t start,
-		    resource_size_t size);
-resource_size_t resource_alignment(struct resource *res);
-static inline resource_size_t resource_size(const struct resource *res)
-{
-	return res->end - res->start + 1;
-}
-static inline unsigned long resource_type(const struct resource *res)
-{
-	return res->flags & IORESOURCE_TYPE_BITS;
-}
-
-/* Convenience shorthand with allocation */
-#define request_region(start,n,name)		__request_region(&ioport_resource, (start), (n), (name), 0)
-#define request_muxed_region(start,n,name)	__request_region(&ioport_resource, (start), (n), (name), IORESOURCE_MUXED)
-#define __request_mem_region(start,n,name, excl) __request_region(&iomem_resource, (start), (n), (name), excl)
-#define request_mem_region(start,n,name) __request_region(&iomem_resource, (start), (n), (name), 0)
-#define request_mem_region_exclusive(start,n,name) \
-	__request_region(&iomem_resource, (start), (n), (name), IORESOURCE_EXCLUSIVE)
-#define rename_region(region, newname) do { (region)->name = (newname); } while (0)
-
-extern struct resource * __request_region(struct resource *,
-					resource_size_t start,
-					resource_size_t n,
-					const char *name, int flags);
-
-/* Compatibility cruft */
-#define release_region(start,n)	__release_region(&ioport_resource, (start), (n))
-#define check_mem_region(start,n)	__check_region(&iomem_resource, (start), (n))
-#define release_mem_region(start,n)	__release_region(&iomem_resource, (start), (n))
-
-extern int __check_region(struct resource *, resource_size_t, resource_size_t);
-extern void __release_region(struct resource *, resource_size_t,
-				resource_size_t);
-
-static inline int __deprecated check_region(resource_size_t s,
-						resource_size_t n)
-{
-	return __check_region(&ioport_resource, s, n);
-}
-
-/* Wrappers for managed devices */
-struct device;
-#define devm_request_region(dev,start,n,name) \
-	__devm_request_region(dev, &ioport_resource, (start), (n), (name))
-#define devm_request_mem_region(dev,start,n,name) \
-	__devm_request_region(dev, &iomem_resource, (start), (n), (name))
-
-extern struct resource * __devm_request_region(struct device *dev,
-				struct resource *parent, resource_size_t start,
-				resource_size_t n, const char *name);
-
-#define devm_release_region(dev, start, n) \
-	__devm_release_region(dev, &ioport_resource, (start), (n))
-#define devm_release_mem_region(dev, start, n) \
-	__devm_release_region(dev, &iomem_resource, (start), (n))
-
-extern void __devm_release_region(struct device *dev, struct resource *parent,
-				  resource_size_t start, resource_size_t n);
-extern int iomem_map_sanity_check(resource_size_t addr, unsigned long size);
-extern int iomem_is_exclusive(u64 addr);
-
-extern int
-walk_system_ram_range(unsigned long start_pfn, unsigned long nr_pages,
-		void *arg, int (*func)(unsigned long, unsigned long, void *));
-
-#endif /* __ASSEMBLY__ */
-#endif	/* _LINUX_IOPORT_H */
diff --git a/ANDROID_3.4.5/include/linux/ioprio.h b/ANDROID_3.4.5/include/linux/ioprio.h
deleted file mode 100644
index 76dad480..00000000
--- a/ANDROID_3.4.5/include/linux/ioprio.h
+++ /dev/null
@@ -1,91 +0,0 @@
-#ifndef IOPRIO_H
-#define IOPRIO_H
-
-#include <linux/sched.h>
-#include <linux/iocontext.h>
-
-/*
- * Gives us 8 prio classes with 13-bits of data for each class
- */
-#define IOPRIO_BITS		(16)
-#define IOPRIO_CLASS_SHIFT	(13)
-#define IOPRIO_PRIO_MASK	((1UL << IOPRIO_CLASS_SHIFT) - 1)
-
-#define IOPRIO_PRIO_CLASS(mask)	((mask) >> IOPRIO_CLASS_SHIFT)
-#define IOPRIO_PRIO_DATA(mask)	((mask) & IOPRIO_PRIO_MASK)
-#define IOPRIO_PRIO_VALUE(class, data)	(((class) << IOPRIO_CLASS_SHIFT) | data)
-
-#define ioprio_valid(mask)	(IOPRIO_PRIO_CLASS((mask)) != IOPRIO_CLASS_NONE)
-
-/*
- * These are the io priority groups as implemented by CFQ. RT is the realtime
- * class, it always gets premium service. BE is the best-effort scheduling
- * class, the default for any process. IDLE is the idle scheduling class, it
- * is only served when no one else is using the disk.
- */
-enum {
-	IOPRIO_CLASS_NONE,
-	IOPRIO_CLASS_RT,
-	IOPRIO_CLASS_BE,
-	IOPRIO_CLASS_IDLE,
-};
-
-/*
- * 8 best effort priority levels are supported
- */
-#define IOPRIO_BE_NR	(8)
-
-enum {
-	IOPRIO_WHO_PROCESS = 1,
-	IOPRIO_WHO_PGRP,
-	IOPRIO_WHO_USER,
-};
-
-/*
- * if process has set io priority explicitly, use that. if not, convert
- * the cpu scheduler nice value to an io priority
- */
-#define IOPRIO_NORM	(4)
-static inline int task_ioprio(struct io_context *ioc)
-{
-	if (ioprio_valid(ioc->ioprio))
-		return IOPRIO_PRIO_DATA(ioc->ioprio);
-
-	return IOPRIO_NORM;
-}
-
-static inline int task_ioprio_class(struct io_context *ioc)
-{
-	if (ioprio_valid(ioc->ioprio))
-		return IOPRIO_PRIO_CLASS(ioc->ioprio);
-
-	return IOPRIO_CLASS_BE;
-}
-
-static inline int task_nice_ioprio(struct task_struct *task)
-{
-	return (task_nice(task) + 20) / 5;
-}
-
-/*
- * This is for the case where the task hasn't asked for a specific IO class.
- * Check for idle and rt task process, and return appropriate IO class.
- */
-static inline int task_nice_ioclass(struct task_struct *task)
-{
-	if (task->policy == SCHED_IDLE)
-		return IOPRIO_CLASS_IDLE;
-	else if (task->policy == SCHED_FIFO || task->policy == SCHED_RR)
-		return IOPRIO_CLASS_RT;
-	else
-		return IOPRIO_CLASS_BE;
-}
-
-/*
- * For inheritance, return the highest of the two given priorities
- */
-extern int ioprio_best(unsigned short aprio, unsigned short bprio);
-
-extern int set_task_ioprio(struct task_struct *task, int ioprio);
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/iova.h b/ANDROID_3.4.5/include/linux/iova.h
deleted file mode 100644
index 76a0759e..00000000
--- a/ANDROID_3.4.5/include/linux/iova.h
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
- * Copyright (c) 2006, Intel Corporation.
- *
- * This file is released under the GPLv2.
- *
- * Copyright (C) 2006-2008 Intel Corporation
- * Author: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
- *
- */
-
-#ifndef _IOVA_H_
-#define _IOVA_H_
-
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/rbtree.h>
-#include <linux/dma-mapping.h>
-
-/* IO virtual address start page frame number */
-#define IOVA_START_PFN		(1)
-
-/* iova structure */
-struct iova {
-	struct rb_node	node;
-	unsigned long	pfn_hi; /* IOMMU dish out addr hi */
-	unsigned long	pfn_lo; /* IOMMU dish out addr lo */
-};
-
-/* holds all the iova translations for a domain */
-struct iova_domain {
-	spinlock_t	iova_rbtree_lock; /* Lock to protect update of rbtree */
-	struct rb_root	rbroot;		/* iova domain rbtree root */
-	struct rb_node	*cached32_node; /* Save last alloced node */
-	unsigned long	dma_32bit_pfn;
-};
-
-struct iova *alloc_iova_mem(void);
-void free_iova_mem(struct iova *iova);
-void free_iova(struct iova_domain *iovad, unsigned long pfn);
-void __free_iova(struct iova_domain *iovad, struct iova *iova);
-struct iova *alloc_iova(struct iova_domain *iovad, unsigned long size,
-	unsigned long limit_pfn,
-	bool size_aligned);
-struct iova *reserve_iova(struct iova_domain *iovad, unsigned long pfn_lo,
-	unsigned long pfn_hi);
-void copy_reserved_iova(struct iova_domain *from, struct iova_domain *to);
-void init_iova_domain(struct iova_domain *iovad, unsigned long pfn_32bit);
-struct iova *find_iova(struct iova_domain *iovad, unsigned long pfn);
-void put_iova_domain(struct iova_domain *iovad);
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/ip.h b/ANDROID_3.4.5/include/linux/ip.h
deleted file mode 100644
index bd0a2a86..00000000
--- a/ANDROID_3.4.5/include/linux/ip.h
+++ /dev/null
@@ -1,149 +0,0 @@
-/*
- * INET		An implementation of the TCP/IP protocol suite for the LINUX
- *		operating system.  INET is implemented using the  BSD Socket
- *		interface as the means of communication with the user level.
- *
- *		Definitions for the IP protocol.
- *
- * Version:	@(#)ip.h	1.0.2	04/28/93
- *
- * Authors:	Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
- *
- *		This program is free software; you can redistribute it and/or
- *		modify it under the terms of the GNU General Public License
- *		as published by the Free Software Foundation; either version
- *		2 of the License, or (at your option) any later version.
- */
-#ifndef _LINUX_IP_H
-#define _LINUX_IP_H
-#include <linux/types.h>
-#include <asm/byteorder.h>
-
-#define IPTOS_TOS_MASK		0x1E
-#define IPTOS_TOS(tos)		((tos)&IPTOS_TOS_MASK)
-#define	IPTOS_LOWDELAY		0x10
-#define	IPTOS_THROUGHPUT	0x08
-#define	IPTOS_RELIABILITY	0x04
-#define	IPTOS_MINCOST		0x02
-
-#define IPTOS_PREC_MASK		0xE0
-#define IPTOS_PREC(tos)		((tos)&IPTOS_PREC_MASK)
-#define IPTOS_PREC_NETCONTROL           0xe0
-#define IPTOS_PREC_INTERNETCONTROL      0xc0
-#define IPTOS_PREC_CRITIC_ECP           0xa0
-#define IPTOS_PREC_FLASHOVERRIDE        0x80
-#define IPTOS_PREC_FLASH                0x60
-#define IPTOS_PREC_IMMEDIATE            0x40
-#define IPTOS_PREC_PRIORITY             0x20
-#define IPTOS_PREC_ROUTINE              0x00
-
-
-/* IP options */
-#define IPOPT_COPY		0x80
-#define IPOPT_CLASS_MASK	0x60
-#define IPOPT_NUMBER_MASK	0x1f
-
-#define	IPOPT_COPIED(o)		((o)&IPOPT_COPY)
-#define	IPOPT_CLASS(o)		((o)&IPOPT_CLASS_MASK)
-#define	IPOPT_NUMBER(o)		((o)&IPOPT_NUMBER_MASK)
-
-#define	IPOPT_CONTROL		0x00
-#define	IPOPT_RESERVED1		0x20
-#define	IPOPT_MEASUREMENT	0x40
-#define	IPOPT_RESERVED2		0x60
-
-#define IPOPT_END	(0 |IPOPT_CONTROL)
-#define IPOPT_NOOP	(1 |IPOPT_CONTROL)
-#define IPOPT_SEC	(2 |IPOPT_CONTROL|IPOPT_COPY)
-#define IPOPT_LSRR	(3 |IPOPT_CONTROL|IPOPT_COPY)
-#define IPOPT_TIMESTAMP	(4 |IPOPT_MEASUREMENT)
-#define IPOPT_CIPSO	(6 |IPOPT_CONTROL|IPOPT_COPY)
-#define IPOPT_RR	(7 |IPOPT_CONTROL)
-#define IPOPT_SID	(8 |IPOPT_CONTROL|IPOPT_COPY)
-#define IPOPT_SSRR	(9 |IPOPT_CONTROL|IPOPT_COPY)
-#define IPOPT_RA	(20|IPOPT_CONTROL|IPOPT_COPY)
-
-#define IPVERSION	4
-#define MAXTTL		255
-#define IPDEFTTL	64
-
-#define IPOPT_OPTVAL 0
-#define IPOPT_OLEN   1
-#define IPOPT_OFFSET 2
-#define IPOPT_MINOFF 4
-#define MAX_IPOPTLEN 40
-#define IPOPT_NOP IPOPT_NOOP
-#define IPOPT_EOL IPOPT_END
-#define IPOPT_TS  IPOPT_TIMESTAMP
-
-#define	IPOPT_TS_TSONLY		0		/* timestamps only */
-#define	IPOPT_TS_TSANDADDR	1		/* timestamps and addresses */
-#define	IPOPT_TS_PRESPEC	3		/* specified modules only */
-
-#define IPV4_BEET_PHMAXLEN 8
-
-struct iphdr {
-#if defined(__LITTLE_ENDIAN_BITFIELD)
-	__u8	ihl:4,
-		version:4;
-#elif defined (__BIG_ENDIAN_BITFIELD)
-	__u8	version:4,
-  		ihl:4;
-#else
-#error	"Please fix <asm/byteorder.h>"
-#endif
-	__u8	tos;
-	__be16	tot_len;
-	__be16	id;
-	__be16	frag_off;
-	__u8	ttl;
-	__u8	protocol;
-	__sum16	check;
-	__be32	saddr;
-	__be32	daddr;
-	/*The options start here. */
-};
-
-#ifdef __KERNEL__
-#include <linux/skbuff.h>
-
-static inline struct iphdr *ip_hdr(const struct sk_buff *skb)
-{
-	return (struct iphdr *)skb_network_header(skb);
-}
-
-static inline struct iphdr *ipip_hdr(const struct sk_buff *skb)
-{
-	return (struct iphdr *)skb_transport_header(skb);
-}
-#endif
-
-struct ip_auth_hdr {
-	__u8  nexthdr;
-	__u8  hdrlen;		/* This one is measured in 32 bit units! */
-	__be16 reserved;
-	__be32 spi;
-	__be32 seq_no;		/* Sequence number */
-	__u8  auth_data[0];	/* Variable len but >=4. Mind the 64 bit alignment! */
-};
-
-struct ip_esp_hdr {
-	__be32 spi;
-	__be32 seq_no;		/* Sequence number */
-	__u8  enc_data[0];	/* Variable len but >=8. Mind the 64 bit alignment! */
-};
-
-struct ip_comp_hdr {
-	__u8 nexthdr;
-	__u8 flags;
-	__be16 cpi;
-};
-
-struct ip_beet_phdr {
-	__u8 nexthdr;
-	__u8 hdrlen;
-	__u8 padlen;
-	__u8 reserved;
-};
-
-#endif	/* _LINUX_IP_H */
diff --git a/ANDROID_3.4.5/include/linux/ip6_tunnel.h b/ANDROID_3.4.5/include/linux/ip6_tunnel.h
deleted file mode 100644
index bf22b031..00000000
--- a/ANDROID_3.4.5/include/linux/ip6_tunnel.h
+++ /dev/null
@@ -1,34 +0,0 @@
-#ifndef _IP6_TUNNEL_H
-#define _IP6_TUNNEL_H
-
-#include <linux/types.h>
-
-#define IPV6_TLV_TNL_ENCAP_LIMIT 4
-#define IPV6_DEFAULT_TNL_ENCAP_LIMIT 4
-
-/* don't add encapsulation limit if one isn't present in inner packet */
-#define IP6_TNL_F_IGN_ENCAP_LIMIT 0x1
-/* copy the traffic class field from the inner packet */
-#define IP6_TNL_F_USE_ORIG_TCLASS 0x2
-/* copy the flowlabel from the inner packet */
-#define IP6_TNL_F_USE_ORIG_FLOWLABEL 0x4
-/* being used for Mobile IPv6 */
-#define IP6_TNL_F_MIP6_DEV 0x8
-/* copy DSCP from the outer packet */
-#define IP6_TNL_F_RCV_DSCP_COPY 0x10
-/* copy fwmark from inner packet */
-#define IP6_TNL_F_USE_ORIG_FWMARK 0x20
-
-struct ip6_tnl_parm {
-	char name[IFNAMSIZ];	/* name of tunnel device */
-	int link;		/* ifindex of underlying L2 interface */
-	__u8 proto;		/* tunnel protocol */
-	__u8 encap_limit;	/* encapsulation limit for tunnel */
-	__u8 hop_limit;		/* hop limit for tunnel */
-	__be32 flowinfo;	/* traffic class and flowlabel for tunnel */
-	__u32 flags;		/* tunnel flags */
-	struct in6_addr laddr;	/* local tunnel end-point address */
-	struct in6_addr raddr;	/* remote tunnel end-point address */
-};
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/ip_vs.h b/ANDROID_3.4.5/include/linux/ip_vs.h
deleted file mode 100644
index 4deb3834..00000000
--- a/ANDROID_3.4.5/include/linux/ip_vs.h
+++ /dev/null
@@ -1,429 +0,0 @@
-/*
- *      IP Virtual Server
- *      data structure and functionality definitions
- */
-
-#ifndef _IP_VS_H
-#define _IP_VS_H
-
-#include <linux/types.h>	/* For __beXX types in userland */
-
-#define IP_VS_VERSION_CODE	0x010201
-#define NVERSION(version)			\
-	(version >> 16) & 0xFF,			\
-	(version >> 8) & 0xFF,			\
-	version & 0xFF
-
-/*
- *      Virtual Service Flags
- */
-#define IP_VS_SVC_F_PERSISTENT	0x0001		/* persistent port */
-#define IP_VS_SVC_F_HASHED	0x0002		/* hashed entry */
-#define IP_VS_SVC_F_ONEPACKET	0x0004		/* one-packet scheduling */
-
-/*
- *      Destination Server Flags
- */
-#define IP_VS_DEST_F_AVAILABLE	0x0001		/* server is available */
-#define IP_VS_DEST_F_OVERLOAD	0x0002		/* server is overloaded */
-
-/*
- *      IPVS sync daemon states
- */
-#define IP_VS_STATE_NONE	0x0000		/* daemon is stopped */
-#define IP_VS_STATE_MASTER	0x0001		/* started as master */
-#define IP_VS_STATE_BACKUP	0x0002		/* started as backup */
-
-/*
- *      IPVS socket options
- */
-#define IP_VS_BASE_CTL		(64+1024+64)		/* base */
-
-#define IP_VS_SO_SET_NONE	IP_VS_BASE_CTL		/* just peek */
-#define IP_VS_SO_SET_INSERT	(IP_VS_BASE_CTL+1)
-#define IP_VS_SO_SET_ADD	(IP_VS_BASE_CTL+2)
-#define IP_VS_SO_SET_EDIT	(IP_VS_BASE_CTL+3)
-#define IP_VS_SO_SET_DEL	(IP_VS_BASE_CTL+4)
-#define IP_VS_SO_SET_FLUSH	(IP_VS_BASE_CTL+5)
-#define IP_VS_SO_SET_LIST	(IP_VS_BASE_CTL+6)
-#define IP_VS_SO_SET_ADDDEST	(IP_VS_BASE_CTL+7)
-#define IP_VS_SO_SET_DELDEST	(IP_VS_BASE_CTL+8)
-#define IP_VS_SO_SET_EDITDEST	(IP_VS_BASE_CTL+9)
-#define IP_VS_SO_SET_TIMEOUT	(IP_VS_BASE_CTL+10)
-#define IP_VS_SO_SET_STARTDAEMON (IP_VS_BASE_CTL+11)
-#define IP_VS_SO_SET_STOPDAEMON (IP_VS_BASE_CTL+12)
-#define IP_VS_SO_SET_RESTORE    (IP_VS_BASE_CTL+13)
-#define IP_VS_SO_SET_SAVE       (IP_VS_BASE_CTL+14)
-#define IP_VS_SO_SET_ZERO	(IP_VS_BASE_CTL+15)
-#define IP_VS_SO_SET_MAX	IP_VS_SO_SET_ZERO
-
-#define IP_VS_SO_GET_VERSION	IP_VS_BASE_CTL
-#define IP_VS_SO_GET_INFO	(IP_VS_BASE_CTL+1)
-#define IP_VS_SO_GET_SERVICES	(IP_VS_BASE_CTL+2)
-#define IP_VS_SO_GET_SERVICE	(IP_VS_BASE_CTL+3)
-#define IP_VS_SO_GET_DESTS	(IP_VS_BASE_CTL+4)
-#define IP_VS_SO_GET_DEST	(IP_VS_BASE_CTL+5)	/* not used now */
-#define IP_VS_SO_GET_TIMEOUT	(IP_VS_BASE_CTL+6)
-#define IP_VS_SO_GET_DAEMON	(IP_VS_BASE_CTL+7)
-#define IP_VS_SO_GET_MAX	IP_VS_SO_GET_DAEMON
-
-
-/*
- *      IPVS Connection Flags
- *      Only flags 0..15 are sent to backup server
- */
-#define IP_VS_CONN_F_FWD_MASK	0x0007		/* mask for the fwd methods */
-#define IP_VS_CONN_F_MASQ	0x0000		/* masquerading/NAT */
-#define IP_VS_CONN_F_LOCALNODE	0x0001		/* local node */
-#define IP_VS_CONN_F_TUNNEL	0x0002		/* tunneling */
-#define IP_VS_CONN_F_DROUTE	0x0003		/* direct routing */
-#define IP_VS_CONN_F_BYPASS	0x0004		/* cache bypass */
-#define IP_VS_CONN_F_SYNC	0x0020		/* entry created by sync */
-#define IP_VS_CONN_F_HASHED	0x0040		/* hashed entry */
-#define IP_VS_CONN_F_NOOUTPUT	0x0080		/* no output packets */
-#define IP_VS_CONN_F_INACTIVE	0x0100		/* not established */
-#define IP_VS_CONN_F_OUT_SEQ	0x0200		/* must do output seq adjust */
-#define IP_VS_CONN_F_IN_SEQ	0x0400		/* must do input seq adjust */
-#define IP_VS_CONN_F_SEQ_MASK	0x0600		/* in/out sequence mask */
-#define IP_VS_CONN_F_NO_CPORT	0x0800		/* no client port set yet */
-#define IP_VS_CONN_F_TEMPLATE	0x1000		/* template, not connection */
-#define IP_VS_CONN_F_ONE_PACKET	0x2000		/* forward only one packet */
-
-#define IP_VS_CONN_F_BACKUP_MASK (IP_VS_CONN_F_FWD_MASK | \
-				  IP_VS_CONN_F_NOOUTPUT | \
-				  IP_VS_CONN_F_INACTIVE | \
-				  IP_VS_CONN_F_SEQ_MASK | \
-				  IP_VS_CONN_F_NO_CPORT | \
-				  IP_VS_CONN_F_TEMPLATE \
-				 )
-
-/* Flags that are not sent to backup server start from bit 16 */
-#define IP_VS_CONN_F_NFCT	(1 << 16)	/* use netfilter conntrack */
-
-/* Connection flags from destination that can be changed by user space */
-#define IP_VS_CONN_F_DEST_MASK (IP_VS_CONN_F_FWD_MASK | \
-				IP_VS_CONN_F_ONE_PACKET | \
-				IP_VS_CONN_F_NFCT | \
-				0)
-
-#define IP_VS_SCHEDNAME_MAXLEN	16
-#define IP_VS_PENAME_MAXLEN	16
-#define IP_VS_IFNAME_MAXLEN	16
-
-#define IP_VS_PEDATA_MAXLEN     255
-
-/*
- *	The struct ip_vs_service_user and struct ip_vs_dest_user are
- *	used to set IPVS rules through setsockopt.
- */
-struct ip_vs_service_user {
-	/* virtual service addresses */
-	__u16		protocol;
-	__be32			addr;		/* virtual ip address */
-	__be16			port;
-	__u32		fwmark;		/* firwall mark of service */
-
-	/* virtual service options */
-	char			sched_name[IP_VS_SCHEDNAME_MAXLEN];
-	unsigned		flags;		/* virtual service flags */
-	unsigned		timeout;	/* persistent timeout in sec */
-	__be32			netmask;	/* persistent netmask */
-};
-
-
-struct ip_vs_dest_user {
-	/* destination server address */
-	__be32			addr;
-	__be16			port;
-
-	/* real server options */
-	unsigned		conn_flags;	/* connection flags */
-	int			weight;		/* destination weight */
-
-	/* thresholds for active connections */
-	__u32		u_threshold;	/* upper threshold */
-	__u32		l_threshold;	/* lower threshold */
-};
-
-
-/*
- *	IPVS statistics object (for user space)
- */
-struct ip_vs_stats_user {
-	__u32                   conns;          /* connections scheduled */
-	__u32                   inpkts;         /* incoming packets */
-	__u32                   outpkts;        /* outgoing packets */
-	__u64                   inbytes;        /* incoming bytes */
-	__u64                   outbytes;       /* outgoing bytes */
-
-	__u32			cps;		/* current connection rate */
-	__u32			inpps;		/* current in packet rate */
-	__u32			outpps;		/* current out packet rate */
-	__u32			inbps;		/* current in byte rate */
-	__u32			outbps;		/* current out byte rate */
-};
-
-
-/* The argument to IP_VS_SO_GET_INFO */
-struct ip_vs_getinfo {
-	/* version number */
-	unsigned int		version;
-
-	/* size of connection hash table */
-	unsigned int		size;
-
-	/* number of virtual services */
-	unsigned int		num_services;
-};
-
-
-/* The argument to IP_VS_SO_GET_SERVICE */
-struct ip_vs_service_entry {
-	/* which service: user fills in these */
-	__u16		protocol;
-	__be32			addr;		/* virtual address */
-	__be16			port;
-	__u32		fwmark;		/* firwall mark of service */
-
-	/* service options */
-	char			sched_name[IP_VS_SCHEDNAME_MAXLEN];
-	unsigned		flags;          /* virtual service flags */
-	unsigned		timeout;	/* persistent timeout */
-	__be32			netmask;	/* persistent netmask */
-
-	/* number of real servers */
-	unsigned int		num_dests;
-
-	/* statistics */
-	struct ip_vs_stats_user stats;
-};
-
-
-struct ip_vs_dest_entry {
-	__be32			addr;		/* destination address */
-	__be16			port;
-	unsigned		conn_flags;	/* connection flags */
-	int			weight;		/* destination weight */
-
-	__u32		u_threshold;	/* upper threshold */
-	__u32		l_threshold;	/* lower threshold */
-
-	__u32		activeconns;	/* active connections */
-	__u32		inactconns;	/* inactive connections */
-	__u32		persistconns;	/* persistent connections */
-
-	/* statistics */
-	struct ip_vs_stats_user stats;
-};
-
-
-/* The argument to IP_VS_SO_GET_DESTS */
-struct ip_vs_get_dests {
-	/* which service: user fills in these */
-	__u16		protocol;
-	__be32			addr;		/* virtual address */
-	__be16			port;
-	__u32		fwmark;		/* firwall mark of service */
-
-	/* number of real servers */
-	unsigned int		num_dests;
-
-	/* the real servers */
-	struct ip_vs_dest_entry	entrytable[0];
-};
-
-
-/* The argument to IP_VS_SO_GET_SERVICES */
-struct ip_vs_get_services {
-	/* number of virtual services */
-	unsigned int		num_services;
-
-	/* service table */
-	struct ip_vs_service_entry entrytable[0];
-};
-
-
-/* The argument to IP_VS_SO_GET_TIMEOUT */
-struct ip_vs_timeout_user {
-	int			tcp_timeout;
-	int			tcp_fin_timeout;
-	int			udp_timeout;
-};
-
-
-/* The argument to IP_VS_SO_GET_DAEMON */
-struct ip_vs_daemon_user {
-	/* sync daemon state (master/backup) */
-	int			state;
-
-	/* multicast interface name */
-	char			mcast_ifn[IP_VS_IFNAME_MAXLEN];
-
-	/* SyncID we belong to */
-	int			syncid;
-};
-
-/*
- *
- * IPVS Generic Netlink interface definitions
- *
- */
-
-/* Generic Netlink family info */
-
-#define IPVS_GENL_NAME		"IPVS"
-#define IPVS_GENL_VERSION	0x1
-
-struct ip_vs_flags {
-	__be32 flags;
-	__be32 mask;
-};
-
-/* Generic Netlink command attributes */
-enum {
-	IPVS_CMD_UNSPEC = 0,
-
-	IPVS_CMD_NEW_SERVICE,		/* add service */
-	IPVS_CMD_SET_SERVICE,		/* modify service */
-	IPVS_CMD_DEL_SERVICE,		/* delete service */
-	IPVS_CMD_GET_SERVICE,		/* get service info */
-
-	IPVS_CMD_NEW_DEST,		/* add destination */
-	IPVS_CMD_SET_DEST,		/* modify destination */
-	IPVS_CMD_DEL_DEST,		/* delete destination */
-	IPVS_CMD_GET_DEST,		/* get destination info */
-
-	IPVS_CMD_NEW_DAEMON,		/* start sync daemon */
-	IPVS_CMD_DEL_DAEMON,		/* stop sync daemon */
-	IPVS_CMD_GET_DAEMON,		/* get sync daemon status */
-
-	IPVS_CMD_SET_CONFIG,		/* set config settings */
-	IPVS_CMD_GET_CONFIG,		/* get config settings */
-
-	IPVS_CMD_SET_INFO,		/* only used in GET_INFO reply */
-	IPVS_CMD_GET_INFO,		/* get general IPVS info */
-
-	IPVS_CMD_ZERO,			/* zero all counters and stats */
-	IPVS_CMD_FLUSH,			/* flush services and dests */
-
-	__IPVS_CMD_MAX,
-};
-
-#define IPVS_CMD_MAX (__IPVS_CMD_MAX - 1)
-
-/* Attributes used in the first level of commands */
-enum {
-	IPVS_CMD_ATTR_UNSPEC = 0,
-	IPVS_CMD_ATTR_SERVICE,		/* nested service attribute */
-	IPVS_CMD_ATTR_DEST,		/* nested destination attribute */
-	IPVS_CMD_ATTR_DAEMON,		/* nested sync daemon attribute */
-	IPVS_CMD_ATTR_TIMEOUT_TCP,	/* TCP connection timeout */
-	IPVS_CMD_ATTR_TIMEOUT_TCP_FIN,	/* TCP FIN wait timeout */
-	IPVS_CMD_ATTR_TIMEOUT_UDP,	/* UDP timeout */
-	__IPVS_CMD_ATTR_MAX,
-};
-
-#define IPVS_CMD_ATTR_MAX (__IPVS_SVC_ATTR_MAX - 1)
-
-/*
- * Attributes used to describe a service
- *
- * Used inside nested attribute IPVS_CMD_ATTR_SERVICE
- */
-enum {
-	IPVS_SVC_ATTR_UNSPEC = 0,
-	IPVS_SVC_ATTR_AF,		/* address family */
-	IPVS_SVC_ATTR_PROTOCOL,		/* virtual service protocol */
-	IPVS_SVC_ATTR_ADDR,		/* virtual service address */
-	IPVS_SVC_ATTR_PORT,		/* virtual service port */
-	IPVS_SVC_ATTR_FWMARK,		/* firewall mark of service */
-
-	IPVS_SVC_ATTR_SCHED_NAME,	/* name of scheduler */
-	IPVS_SVC_ATTR_FLAGS,		/* virtual service flags */
-	IPVS_SVC_ATTR_TIMEOUT,		/* persistent timeout */
-	IPVS_SVC_ATTR_NETMASK,		/* persistent netmask */
-
-	IPVS_SVC_ATTR_STATS,		/* nested attribute for service stats */
-
-	IPVS_SVC_ATTR_PE_NAME,		/* name of ct retriever */
-
-	__IPVS_SVC_ATTR_MAX,
-};
-
-#define IPVS_SVC_ATTR_MAX (__IPVS_SVC_ATTR_MAX - 1)
-
-/*
- * Attributes used to describe a destination (real server)
- *
- * Used inside nested attribute IPVS_CMD_ATTR_DEST
- */
-enum {
-	IPVS_DEST_ATTR_UNSPEC = 0,
-	IPVS_DEST_ATTR_ADDR,		/* real server address */
-	IPVS_DEST_ATTR_PORT,		/* real server port */
-
-	IPVS_DEST_ATTR_FWD_METHOD,	/* forwarding method */
-	IPVS_DEST_ATTR_WEIGHT,		/* destination weight */
-
-	IPVS_DEST_ATTR_U_THRESH,	/* upper threshold */
-	IPVS_DEST_ATTR_L_THRESH,	/* lower threshold */
-
-	IPVS_DEST_ATTR_ACTIVE_CONNS,	/* active connections */
-	IPVS_DEST_ATTR_INACT_CONNS,	/* inactive connections */
-	IPVS_DEST_ATTR_PERSIST_CONNS,	/* persistent connections */
-
-	IPVS_DEST_ATTR_STATS,		/* nested attribute for dest stats */
-	__IPVS_DEST_ATTR_MAX,
-};
-
-#define IPVS_DEST_ATTR_MAX (__IPVS_DEST_ATTR_MAX - 1)
-
-/*
- * Attributes describing a sync daemon
- *
- * Used inside nested attribute IPVS_CMD_ATTR_DAEMON
- */
-enum {
-	IPVS_DAEMON_ATTR_UNSPEC = 0,
-	IPVS_DAEMON_ATTR_STATE,		/* sync daemon state (master/backup) */
-	IPVS_DAEMON_ATTR_MCAST_IFN,	/* multicast interface name */
-	IPVS_DAEMON_ATTR_SYNC_ID,	/* SyncID we belong to */
-	__IPVS_DAEMON_ATTR_MAX,
-};
-
-#define IPVS_DAEMON_ATTR_MAX (__IPVS_DAEMON_ATTR_MAX - 1)
-
-/*
- * Attributes used to describe service or destination entry statistics
- *
- * Used inside nested attributes IPVS_SVC_ATTR_STATS and IPVS_DEST_ATTR_STATS
- */
-enum {
-	IPVS_STATS_ATTR_UNSPEC = 0,
-	IPVS_STATS_ATTR_CONNS,		/* connections scheduled */
-	IPVS_STATS_ATTR_INPKTS,		/* incoming packets */
-	IPVS_STATS_ATTR_OUTPKTS,	/* outgoing packets */
-	IPVS_STATS_ATTR_INBYTES,	/* incoming bytes */
-	IPVS_STATS_ATTR_OUTBYTES,	/* outgoing bytes */
-
-	IPVS_STATS_ATTR_CPS,		/* current connection rate */
-	IPVS_STATS_ATTR_INPPS,		/* current in packet rate */
-	IPVS_STATS_ATTR_OUTPPS,		/* current out packet rate */
-	IPVS_STATS_ATTR_INBPS,		/* current in byte rate */
-	IPVS_STATS_ATTR_OUTBPS,		/* current out byte rate */
-	__IPVS_STATS_ATTR_MAX,
-};
-
-#define IPVS_STATS_ATTR_MAX (__IPVS_STATS_ATTR_MAX - 1)
-
-/* Attributes used in response to IPVS_CMD_GET_INFO command */
-enum {
-	IPVS_INFO_ATTR_UNSPEC = 0,
-	IPVS_INFO_ATTR_VERSION,		/* IPVS version number */
-	IPVS_INFO_ATTR_CONN_TAB_SIZE,	/* size of connection hash table */
-	__IPVS_INFO_ATTR_MAX,
-};
-
-#define IPVS_INFO_ATTR_MAX (__IPVS_INFO_ATTR_MAX - 1)
-
-#endif	/* _IP_VS_H */
diff --git a/ANDROID_3.4.5/include/linux/ipc.h b/ANDROID_3.4.5/include/linux/ipc.h
deleted file mode 100644
index 30e81614..00000000
--- a/ANDROID_3.4.5/include/linux/ipc.h
+++ /dev/null
@@ -1,103 +0,0 @@
-#ifndef _LINUX_IPC_H
-#define _LINUX_IPC_H
-
-#include <linux/types.h>
-
-#define IPC_PRIVATE ((__kernel_key_t) 0)  
-
-/* Obsolete, used only for backwards compatibility and libc5 compiles */
-struct ipc_perm
-{
-	__kernel_key_t	key;
-	__kernel_uid_t	uid;
-	__kernel_gid_t	gid;
-	__kernel_uid_t	cuid;
-	__kernel_gid_t	cgid;
-	__kernel_mode_t	mode; 
-	unsigned short	seq;
-};
-
-/* Include the definition of ipc64_perm */
-#include <asm/ipcbuf.h>
-
-/* resource get request flags */
-#define IPC_CREAT  00001000   /* create if key is nonexistent */
-#define IPC_EXCL   00002000   /* fail if key exists */
-#define IPC_NOWAIT 00004000   /* return error on wait */
-
-/* these fields are used by the DIPC package so the kernel as standard
-   should avoid using them if possible */
-   
-#define IPC_DIPC 00010000  /* make it distributed */
-#define IPC_OWN  00020000  /* this machine is the DIPC owner */
-
-/* 
- * Control commands used with semctl, msgctl and shmctl 
- * see also specific commands in sem.h, msg.h and shm.h
- */
-#define IPC_RMID 0     /* remove resource */
-#define IPC_SET  1     /* set ipc_perm options */
-#define IPC_STAT 2     /* get ipc_perm options */
-#define IPC_INFO 3     /* see ipcs */
-
-/*
- * Version flags for semctl, msgctl, and shmctl commands
- * These are passed as bitflags or-ed with the actual command
- */
-#define IPC_OLD 0	/* Old version (no 32-bit UID support on many
-			   architectures) */
-#define IPC_64  0x0100  /* New version (support 32-bit UIDs, bigger
-			   message sizes, etc. */
-
-/*
- * These are used to wrap system calls.
- *
- * See architecture code for ugly details..
- */
-struct ipc_kludge {
-	struct msgbuf __user *msgp;
-	long msgtyp;
-};
-
-#define SEMOP		 1
-#define SEMGET		 2
-#define SEMCTL		 3
-#define SEMTIMEDOP	 4
-#define MSGSND		11
-#define MSGRCV		12
-#define MSGGET		13
-#define MSGCTL		14
-#define SHMAT		21
-#define SHMDT		22
-#define SHMGET		23
-#define SHMCTL		24
-
-/* Used by the DIPC package, try and avoid reusing it */
-#define DIPC            25
-
-#define IPCCALL(version,op)	((version)<<16 | (op))
-
-#ifdef __KERNEL__
-#include <linux/spinlock.h>
-
-#define IPCMNI 32768  /* <= MAX_INT limit for ipc arrays (including sysctl changes) */
-
-/* used by in-kernel data structures */
-struct kern_ipc_perm
-{
-	spinlock_t	lock;
-	int		deleted;
-	int		id;
-	key_t		key;
-	uid_t		uid;
-	gid_t		gid;
-	uid_t		cuid;
-	gid_t		cgid;
-	umode_t		mode; 
-	unsigned long	seq;
-	void		*security;
-};
-
-#endif /* __KERNEL__ */
-
-#endif /* _LINUX_IPC_H */
diff --git a/ANDROID_3.4.5/include/linux/ipc_namespace.h b/ANDROID_3.4.5/include/linux/ipc_namespace.h
deleted file mode 100644
index 8a297a5e..00000000
--- a/ANDROID_3.4.5/include/linux/ipc_namespace.h
+++ /dev/null
@@ -1,146 +0,0 @@
-#ifndef __IPC_NAMESPACE_H__
-#define __IPC_NAMESPACE_H__
-
-#include <linux/err.h>
-#include <linux/idr.h>
-#include <linux/rwsem.h>
-#include <linux/notifier.h>
-#include <linux/nsproxy.h>
-
-/*
- * ipc namespace events
- */
-#define IPCNS_MEMCHANGED   0x00000001   /* Notify lowmem size changed */
-#define IPCNS_CREATED  0x00000002   /* Notify new ipc namespace created */
-#define IPCNS_REMOVED  0x00000003   /* Notify ipc namespace removed */
-
-#define IPCNS_CALLBACK_PRI 0
-
-struct user_namespace;
-
-struct ipc_ids {
-	int in_use;
-	unsigned short seq;
-	unsigned short seq_max;
-	struct rw_semaphore rw_mutex;
-	struct idr ipcs_idr;
-};
-
-struct ipc_namespace {
-	atomic_t	count;
-	struct ipc_ids	ids[3];
-
-	int		sem_ctls[4];
-	int		used_sems;
-
-	int		msg_ctlmax;
-	int		msg_ctlmnb;
-	int		msg_ctlmni;
-	atomic_t	msg_bytes;
-	atomic_t	msg_hdrs;
-	int		auto_msgmni;
-
-	size_t		shm_ctlmax;
-	size_t		shm_ctlall;
-	int		shm_ctlmni;
-	int		shm_tot;
-	/*
-	 * Defines whether IPC_RMID is forced for _all_ shm segments regardless
-	 * of shmctl()
-	 */
-	int		shm_rmid_forced;
-
-	struct notifier_block ipcns_nb;
-
-	/* The kern_mount of the mqueuefs sb.  We take a ref on it */
-	struct vfsmount	*mq_mnt;
-
-	/* # queues in this ns, protected by mq_lock */
-	unsigned int    mq_queues_count;
-
-	/* next fields are set through sysctl */
-	unsigned int    mq_queues_max;   /* initialized to DFLT_QUEUESMAX */
-	unsigned int    mq_msg_max;      /* initialized to DFLT_MSGMAX */
-	unsigned int    mq_msgsize_max;  /* initialized to DFLT_MSGSIZEMAX */
-
-	/* user_ns which owns the ipc ns */
-	struct user_namespace *user_ns;
-};
-
-extern struct ipc_namespace init_ipc_ns;
-extern atomic_t nr_ipc_ns;
-
-extern spinlock_t mq_lock;
-
-#ifdef CONFIG_SYSVIPC
-extern int register_ipcns_notifier(struct ipc_namespace *);
-extern int cond_register_ipcns_notifier(struct ipc_namespace *);
-extern void unregister_ipcns_notifier(struct ipc_namespace *);
-extern int ipcns_notify(unsigned long);
-extern void shm_destroy_orphaned(struct ipc_namespace *ns);
-#else /* CONFIG_SYSVIPC */
-static inline int register_ipcns_notifier(struct ipc_namespace *ns)
-{ return 0; }
-static inline int cond_register_ipcns_notifier(struct ipc_namespace *ns)
-{ return 0; }
-static inline void unregister_ipcns_notifier(struct ipc_namespace *ns) { }
-static inline int ipcns_notify(unsigned long l) { return 0; }
-static inline void shm_destroy_orphaned(struct ipc_namespace *ns) {}
-#endif /* CONFIG_SYSVIPC */
-
-#ifdef CONFIG_POSIX_MQUEUE
-extern int mq_init_ns(struct ipc_namespace *ns);
-/* default values */
-#define DFLT_QUEUESMAX 256     /* max number of message queues */
-#define DFLT_MSGMAX    10      /* max number of messages in each queue */
-#define HARD_MSGMAX    (32768*sizeof(void *)/4)
-#define DFLT_MSGSIZEMAX 8192   /* max message size */
-#else
-static inline int mq_init_ns(struct ipc_namespace *ns) { return 0; }
-#endif
-
-#if defined(CONFIG_IPC_NS)
-extern struct ipc_namespace *copy_ipcs(unsigned long flags,
-				       struct task_struct *tsk);
-static inline struct ipc_namespace *get_ipc_ns(struct ipc_namespace *ns)
-{
-	if (ns)
-		atomic_inc(&ns->count);
-	return ns;
-}
-
-extern void put_ipc_ns(struct ipc_namespace *ns);
-#else
-static inline struct ipc_namespace *copy_ipcs(unsigned long flags,
-					      struct task_struct *tsk)
-{
-	if (flags & CLONE_NEWIPC)
-		return ERR_PTR(-EINVAL);
-
-	return tsk->nsproxy->ipc_ns;
-}
-
-static inline struct ipc_namespace *get_ipc_ns(struct ipc_namespace *ns)
-{
-	return ns;
-}
-
-static inline void put_ipc_ns(struct ipc_namespace *ns)
-{
-}
-#endif
-
-#ifdef CONFIG_POSIX_MQUEUE_SYSCTL
-
-struct ctl_table_header;
-extern struct ctl_table_header *mq_register_sysctl_table(void);
-
-#else /* CONFIG_POSIX_MQUEUE_SYSCTL */
-
-static inline struct ctl_table_header *mq_register_sysctl_table(void)
-{
-	return NULL;
-}
-
-#endif /* CONFIG_POSIX_MQUEUE_SYSCTL */
-#endif
diff --git a/ANDROID_3.4.5/include/linux/ipmi.h b/ANDROID_3.4.5/include/linux/ipmi.h
deleted file mode 100644
index 48dcba9b..00000000
--- a/ANDROID_3.4.5/include/linux/ipmi.h
+++ /dev/null
@@ -1,736 +0,0 @@
-/*
- * ipmi.h
- *
- * MontaVista IPMI interface
- *
- * Author: MontaVista Software, Inc.
- *         Corey Minyard <minyard@mvista.com>
- *         source@mvista.com
- *
- * Copyright 2002 MontaVista Software Inc.
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License as published by the
- *  Free Software Foundation; either version 2 of the License, or (at your
- *  option) any later version.
- *
- *
- *  THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- *  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
- *  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- *  BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- *  OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- *  ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
- *  TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
- *  USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __LINUX_IPMI_H
-#define __LINUX_IPMI_H
-
-#include <linux/ipmi_msgdefs.h>
-#include <linux/compiler.h>
-
-/*
- * This file describes an interface to an IPMI driver.  You have to
- * have a fairly good understanding of IPMI to use this, so go read
- * the specs first before actually trying to do anything.
- *
- * With that said, this driver provides a multi-user interface to the
- * IPMI driver, and it allows multiple IPMI physical interfaces below
- * the driver.  The physical interfaces bind as a lower layer on the
- * driver.  They appear as interfaces to the application using this
- * interface.
- *
- * Multi-user means that multiple applications may use the driver,
- * send commands, receive responses, etc.  The driver keeps track of
- * commands the user sends and tracks the responses.  The responses
- * will go back to the application that send the command.  If the
- * response doesn't come back in time, the driver will return a
- * timeout error response to the application.  Asynchronous events
- * from the BMC event queue will go to all users bound to the driver.
- * The incoming event queue in the BMC will automatically be flushed
- * if it becomes full and it is queried once a second to see if
- * anything is in it.  Incoming commands to the driver will get
- * delivered as commands.
- *
- * This driver provides two main interfaces: one for in-kernel
- * applications and another for userland applications.  The
- * capabilities are basically the same for both interface, although
- * the interfaces are somewhat different.  The stuff in the
- * #ifdef __KERNEL__ below is the in-kernel interface.  The userland
- * interface is defined later in the file.  */
-
-
-
-/*
- * This is an overlay for all the address types, so it's easy to
- * determine the actual address type.  This is kind of like addresses
- * work for sockets.
- */
-#define IPMI_MAX_ADDR_SIZE 32
-struct ipmi_addr {
-	 /* Try to take these from the "Channel Medium Type" table
-	    in section 6.5 of the IPMI 1.5 manual. */
-	int   addr_type;
-	short channel;
-	char  data[IPMI_MAX_ADDR_SIZE];
-};
-
-/*
- * When the address is not used, the type will be set to this value.
- * The channel is the BMC's channel number for the channel (usually
- * 0), or IPMC_BMC_CHANNEL if communicating directly with the BMC.
- */
-#define IPMI_SYSTEM_INTERFACE_ADDR_TYPE	0x0c
-struct ipmi_system_interface_addr {
-	int           addr_type;
-	short         channel;
-	unsigned char lun;
-};
-
-/* An IPMB Address. */
-#define IPMI_IPMB_ADDR_TYPE		0x01
-/* Used for broadcast get device id as described in section 17.9 of the
-   IPMI 1.5 manual. */
-#define IPMI_IPMB_BROADCAST_ADDR_TYPE	0x41
-struct ipmi_ipmb_addr {
-	int           addr_type;
-	short         channel;
-	unsigned char slave_addr;
-	unsigned char lun;
-};
-
-/*
- * A LAN Address.  This is an address to/from a LAN interface bridged
- * by the BMC, not an address actually out on the LAN.
- *
- * A conscious decision was made here to deviate slightly from the IPMI
- * spec.  We do not use rqSWID and rsSWID like it shows in the
- * message.  Instead, we use remote_SWID and local_SWID.  This means
- * that any message (a request or response) from another device will
- * always have exactly the same address.  If you didn't do this,
- * requests and responses from the same device would have different
- * addresses, and that's not too cool.
- *
- * In this address, the remote_SWID is always the SWID the remote
- * message came from, or the SWID we are sending the message to.
- * local_SWID is always our SWID.  Note that having our SWID in the
- * message is a little weird, but this is required.
- */
-#define IPMI_LAN_ADDR_TYPE		0x04
-struct ipmi_lan_addr {
-	int           addr_type;
-	short         channel;
-	unsigned char privilege;
-	unsigned char session_handle;
-	unsigned char remote_SWID;
-	unsigned char local_SWID;
-	unsigned char lun;
-};
-
-
-/*
- * Channel for talking directly with the BMC.  When using this
- * channel, This is for the system interface address type only.  FIXME
- * - is this right, or should we use -1?
- */
-#define IPMI_BMC_CHANNEL  0xf
-#define IPMI_NUM_CHANNELS 0x10
-
-/*
- * Used to signify an "all channel" bitmask.  This is more than the
- * actual number of channels because this is used in userland and
- * will cover us if the number of channels is extended.
- */
-#define IPMI_CHAN_ALL     (~0)
-
-
-/*
- * A raw IPMI message without any addressing.  This covers both
- * commands and responses.  The completion code is always the first
- * byte of data in the response (as the spec shows the messages laid
- * out).
- */
-struct ipmi_msg {
-	unsigned char  netfn;
-	unsigned char  cmd;
-	unsigned short data_len;
-	unsigned char  __user *data;
-};
-
-struct kernel_ipmi_msg {
-	unsigned char  netfn;
-	unsigned char  cmd;
-	unsigned short data_len;
-	unsigned char  *data;
-};
-
-/*
- * Various defines that are useful for IPMI applications.
- */
-#define IPMI_INVALID_CMD_COMPLETION_CODE	0xC1
-#define IPMI_TIMEOUT_COMPLETION_CODE		0xC3
-#define IPMI_UNKNOWN_ERR_COMPLETION_CODE	0xff
-
-
-/*
- * Receive types for messages coming from the receive interface.  This
- * is used for the receive in-kernel interface and in the receive
- * IOCTL.
- *
- * The "IPMI_RESPONSE_RESPNOSE_TYPE" is a little strange sounding, but
- * it allows you to get the message results when you send a response
- * message.
- */
-#define IPMI_RESPONSE_RECV_TYPE		1 /* A response to a command */
-#define IPMI_ASYNC_EVENT_RECV_TYPE	2 /* Something from the event queue */
-#define IPMI_CMD_RECV_TYPE		3 /* A command from somewhere else */
-#define IPMI_RESPONSE_RESPONSE_TYPE	4 /* The response for
-					      a sent response, giving any
-					      error status for sending the
-					      response.  When you send a
-					      response message, this will
-					      be returned. */
-#define IPMI_OEM_RECV_TYPE		5 /* The response for OEM Channels */
-
-/* Note that async events and received commands do not have a completion
-   code as the first byte of the incoming data, unlike a response. */
-
-
-/*
- * Modes for ipmi_set_maint_mode() and the userland IOCTL.  The AUTO
- * setting is the default and means it will be set on certain
- * commands.  Hard setting it on and off will override automatic
- * operation.
- */
-#define IPMI_MAINTENANCE_MODE_AUTO	0
-#define IPMI_MAINTENANCE_MODE_OFF	1
-#define IPMI_MAINTENANCE_MODE_ON	2
-
-#ifdef __KERNEL__
-
-/*
- * The in-kernel interface.
- */
-#include <linux/list.h>
-#include <linux/proc_fs.h>
-
-struct module;
-struct device;
-
-/* Opaque type for a IPMI message user.  One of these is needed to
-   send and receive messages. */
-typedef struct ipmi_user *ipmi_user_t;
-
-/*
- * Stuff coming from the receive interface comes as one of these.
- * They are allocated, the receiver must free them with
- * ipmi_free_recv_msg() when done with the message.  The link is not
- * used after the message is delivered, so the upper layer may use the
- * link to build a linked list, if it likes.
- */
-struct ipmi_recv_msg {
-	struct list_head link;
-
-	/* The type of message as defined in the "Receive Types"
-	   defines above. */
-	int              recv_type;
-
-	ipmi_user_t      user;
-	struct ipmi_addr addr;
-	long             msgid;
-	struct kernel_ipmi_msg  msg;
-
-	/* The user_msg_data is the data supplied when a message was
-	   sent, if this is a response to a sent message.  If this is
-	   not a response to a sent message, then user_msg_data will
-	   be NULL.  If the user above is NULL, then this will be the
-	   intf. */
-	void             *user_msg_data;
-
-	/* Call this when done with the message.  It will presumably free
-	   the message and do any other necessary cleanup. */
-	void (*done)(struct ipmi_recv_msg *msg);
-
-	/* Place-holder for the data, don't make any assumptions about
-	   the size or existence of this, since it may change. */
-	unsigned char   msg_data[IPMI_MAX_MSG_LENGTH];
-};
-
-/* Allocate and free the receive message. */
-void ipmi_free_recv_msg(struct ipmi_recv_msg *msg);
-
-struct ipmi_user_hndl {
-	/* Routine type to call when a message needs to be routed to
-	   the upper layer.  This will be called with some locks held,
-	   the only IPMI routines that can be called are ipmi_request
-	   and the alloc/free operations.  The handler_data is the
-	   variable supplied when the receive handler was registered. */
-	void (*ipmi_recv_hndl)(struct ipmi_recv_msg *msg,
-			       void                 *user_msg_data);
-
-	/* Called when the interface detects a watchdog pre-timeout.  If
-	   this is NULL, it will be ignored for the user. */
-	void (*ipmi_watchdog_pretimeout)(void *handler_data);
-};
-
-/* Create a new user of the IPMI layer on the given interface number. */
-int ipmi_create_user(unsigned int          if_num,
-		     struct ipmi_user_hndl *handler,
-		     void                  *handler_data,
-		     ipmi_user_t           *user);
-
-/* Destroy the given user of the IPMI layer.  Note that after this
-   function returns, the system is guaranteed to not call any
-   callbacks for the user.  Thus as long as you destroy all the users
-   before you unload a module, you will be safe.  And if you destroy
-   the users before you destroy the callback structures, it should be
-   safe, too. */
-int ipmi_destroy_user(ipmi_user_t user);
-
-/* Get the IPMI version of the BMC we are talking to. */
-void ipmi_get_version(ipmi_user_t   user,
-		      unsigned char *major,
-		      unsigned char *minor);
-
-/* Set and get the slave address and LUN that we will use for our
-   source messages.  Note that this affects the interface, not just
-   this user, so it will affect all users of this interface.  This is
-   so some initialization code can come in and do the OEM-specific
-   things it takes to determine your address (if not the BMC) and set
-   it for everyone else.  Note that each channel can have its own address. */
-int ipmi_set_my_address(ipmi_user_t   user,
-			unsigned int  channel,
-			unsigned char address);
-int ipmi_get_my_address(ipmi_user_t   user,
-			unsigned int  channel,
-			unsigned char *address);
-int ipmi_set_my_LUN(ipmi_user_t   user,
-		    unsigned int  channel,
-		    unsigned char LUN);
-int ipmi_get_my_LUN(ipmi_user_t   user,
-		    unsigned int  channel,
-		    unsigned char *LUN);
-
-/*
- * Like ipmi_request, but lets you specify the number of retries and
- * the retry time.  The retries is the number of times the message
- * will be resent if no reply is received.  If set to -1, the default
- * value will be used.  The retry time is the time in milliseconds
- * between retries.  If set to zero, the default value will be
- * used.
- *
- * Don't use this unless you *really* have to.  It's primarily for the
- * IPMI over LAN converter; since the LAN stuff does its own retries,
- * it makes no sense to do it here.  However, this can be used if you
- * have unusual requirements.
- */
-int ipmi_request_settime(ipmi_user_t      user,
-			 struct ipmi_addr *addr,
-			 long             msgid,
-			 struct kernel_ipmi_msg  *msg,
-			 void             *user_msg_data,
-			 int              priority,
-			 int              max_retries,
-			 unsigned int     retry_time_ms);
-
-/*
- * Like ipmi_request, but with messages supplied.  This will not
- * allocate any memory, and the messages may be statically allocated
- * (just make sure to do the "done" handling on them).  Note that this
- * is primarily for the watchdog timer, since it should be able to
- * send messages even if no memory is available.  This is subject to
- * change as the system changes, so don't use it unless you REALLY
- * have to.
- */
-int ipmi_request_supply_msgs(ipmi_user_t          user,
-			     struct ipmi_addr     *addr,
-			     long                 msgid,
-			     struct kernel_ipmi_msg *msg,
-			     void                 *user_msg_data,
-			     void                 *supplied_smi,
-			     struct ipmi_recv_msg *supplied_recv,
-			     int                  priority);
-
-/*
- * Poll the IPMI interface for the user.  This causes the IPMI code to
- * do an immediate check for information from the driver and handle
- * anything that is immediately pending.  This will not block in any
- * way.  This is useful if you need to spin waiting for something to
- * happen in the IPMI driver.
- */
-void ipmi_poll_interface(ipmi_user_t user);
-
-/*
- * When commands come in to the SMS, the user can register to receive
- * them.  Only one user can be listening on a specific netfn/cmd/chan tuple
- * at a time, you will get an EBUSY error if the command is already
- * registered.  If a command is received that does not have a user
- * registered, the driver will automatically return the proper
- * error.  Channels are specified as a bitfield, use IPMI_CHAN_ALL to
- * mean all channels.
- */
-int ipmi_register_for_cmd(ipmi_user_t   user,
-			  unsigned char netfn,
-			  unsigned char cmd,
-			  unsigned int  chans);
-int ipmi_unregister_for_cmd(ipmi_user_t   user,
-			    unsigned char netfn,
-			    unsigned char cmd,
-			    unsigned int  chans);
-
-/*
- * Go into a mode where the driver will not autonomously attempt to do
- * things with the interface.  It will still respond to attentions and
- * interrupts, and it will expect that commands will complete.  It
- * will not automatcially check for flags, events, or things of that
- * nature.
- *
- * This is primarily used for firmware upgrades.  The idea is that
- * when you go into firmware upgrade mode, you do this operation
- * and the driver will not attempt to do anything but what you tell
- * it or what the BMC asks for.
- *
- * Note that if you send a command that resets the BMC, the driver
- * will still expect a response from that command.  So the BMC should
- * reset itself *after* the response is sent.  Resetting before the
- * response is just silly.
- *
- * If in auto maintenance mode, the driver will automatically go into
- * maintenance mode for 30 seconds if it sees a cold reset, a warm
- * reset, or a firmware NetFN.  This means that code that uses only
- * firmware NetFN commands to do upgrades will work automatically
- * without change, assuming it sends a message every 30 seconds or
- * less.
- *
- * See the IPMI_MAINTENANCE_MODE_xxx defines for what the mode means.
- */
-int ipmi_get_maintenance_mode(ipmi_user_t user);
-int ipmi_set_maintenance_mode(ipmi_user_t user, int mode);
-
-/*
- * When the user is created, it will not receive IPMI events by
- * default.  The user must set this to TRUE to get incoming events.
- * The first user that sets this to TRUE will receive all events that
- * have been queued while no one was waiting for events.
- */
-int ipmi_set_gets_events(ipmi_user_t user, int val);
-
-/*
- * Called when a new SMI is registered.  This will also be called on
- * every existing interface when a new watcher is registered with
- * ipmi_smi_watcher_register().
- */
-struct ipmi_smi_watcher {
-	struct list_head link;
-
-	/* You must set the owner to the current module, if you are in
-	   a module (generally just set it to "THIS_MODULE"). */
-	struct module *owner;
-
-	/* These two are called with read locks held for the interface
-	   the watcher list.  So you can add and remove users from the
-	   IPMI interface, send messages, etc., but you cannot add
-	   or remove SMI watchers or SMI interfaces. */
-	void (*new_smi)(int if_num, struct device *dev);
-	void (*smi_gone)(int if_num);
-};
-
-int ipmi_smi_watcher_register(struct ipmi_smi_watcher *watcher);
-int ipmi_smi_watcher_unregister(struct ipmi_smi_watcher *watcher);
-
-/* The following are various helper functions for dealing with IPMI
-   addresses. */
-
-/* Return the maximum length of an IPMI address given it's type. */
-unsigned int ipmi_addr_length(int addr_type);
-
-/* Validate that the given IPMI address is valid. */
-int ipmi_validate_addr(struct ipmi_addr *addr, int len);
-
-/*
- * How did the IPMI driver find out about the device?
- */
-enum ipmi_addr_src {
-	SI_INVALID = 0, SI_HOTMOD, SI_HARDCODED, SI_SPMI, SI_ACPI, SI_SMBIOS,
-	SI_PCI,	SI_DEVICETREE, SI_DEFAULT
-};
-
-union ipmi_smi_info_union {
-	/*
-	 * the acpi_info element is defined for the SI_ACPI
-	 * address type
-	 */
-	struct {
-		void *acpi_handle;
-	} acpi_info;
-};
-
-struct ipmi_smi_info {
-	enum ipmi_addr_src addr_src;
-
-	/*
-	 * Base device for the interface.  Don't forget to put this when
-	 * you are done.
-	 */
-	struct device *dev;
-
-	/*
-	 * The addr_info provides more detailed info for some IPMI
-	 * devices, depending on the addr_src.  Currently only SI_ACPI
-	 * info is provided.
-	 */
-	union ipmi_smi_info_union addr_info;
-};
-
-/* This is to get the private info of ipmi_smi_t */
-extern int ipmi_get_smi_info(int if_num, struct ipmi_smi_info *data);
-
-#endif /* __KERNEL__ */
-
-
-/*
- * The userland interface
- */
-
-/*
- * The userland interface for the IPMI driver is a standard character
- * device, with each instance of an interface registered as a minor
- * number under the major character device.
- *
- * The read and write calls do not work, to get messages in and out
- * requires ioctl calls because of the complexity of the data.  select
- * and poll do work, so you can wait for input using the file
- * descriptor, you just can use read to get it.
- *
- * In general, you send a command down to the interface and receive
- * responses back.  You can use the msgid value to correlate commands
- * and responses, the driver will take care of figuring out which
- * incoming messages are for which command and find the proper msgid
- * value to report.  You will only receive reponses for commands you
- * send.  Asynchronous events, however, go to all open users, so you
- * must be ready to handle these (or ignore them if you don't care).
- *
- * The address type depends upon the channel type.  When talking
- * directly to the BMC (IPMC_BMC_CHANNEL), the address is ignored
- * (IPMI_UNUSED_ADDR_TYPE).  When talking to an IPMB channel, you must
- * supply a valid IPMB address with the addr_type set properly.
- *
- * When talking to normal channels, the driver takes care of the
- * details of formatting and sending messages on that channel.  You do
- * not, for instance, have to format a send command, you just send
- * whatever command you want to the channel, the driver will create
- * the send command, automatically issue receive command and get even
- * commands, and pass those up to the proper user.
- */
-
-
-/* The magic IOCTL value for this interface. */
-#define IPMI_IOC_MAGIC 'i'
-
-
-/* Messages sent to the interface are this format. */
-struct ipmi_req {
-	unsigned char __user *addr; /* Address to send the message to. */
-	unsigned int  addr_len;
-
-	long    msgid; /* The sequence number for the message.  This
-			  exact value will be reported back in the
-			  response to this request if it is a command.
-			  If it is a response, this will be used as
-			  the sequence value for the response.  */
-
-	struct ipmi_msg msg;
-};
-/*
- * Send a message to the interfaces.  error values are:
- *   - EFAULT - an address supplied was invalid.
- *   - EINVAL - The address supplied was not valid, or the command
- *              was not allowed.
- *   - EMSGSIZE - The message to was too large.
- *   - ENOMEM - Buffers could not be allocated for the command.
- */
-#define IPMICTL_SEND_COMMAND		_IOR(IPMI_IOC_MAGIC, 13,	\
-					     struct ipmi_req)
-
-/* Messages sent to the interface with timing parameters are this
-   format. */
-struct ipmi_req_settime {
-	struct ipmi_req req;
-
-	/* See ipmi_request_settime() above for details on these
-	   values. */
-	int          retries;
-	unsigned int retry_time_ms;
-};
-/*
- * Send a message to the interfaces with timing parameters.  error values
- * are:
- *   - EFAULT - an address supplied was invalid.
- *   - EINVAL - The address supplied was not valid, or the command
- *              was not allowed.
- *   - EMSGSIZE - The message to was too large.
- *   - ENOMEM - Buffers could not be allocated for the command.
- */
-#define IPMICTL_SEND_COMMAND_SETTIME	_IOR(IPMI_IOC_MAGIC, 21,	\
-					     struct ipmi_req_settime)
-
-/* Messages received from the interface are this format. */
-struct ipmi_recv {
-	int     recv_type; /* Is this a command, response or an
-			      asyncronous event. */
-
-	unsigned char __user *addr;    /* Address the message was from is put
-				   here.  The caller must supply the
-				   memory. */
-	unsigned int  addr_len; /* The size of the address buffer.
-				   The caller supplies the full buffer
-				   length, this value is updated to
-				   the actual message length when the
-				   message is received. */
-
-	long    msgid; /* The sequence number specified in the request
-			  if this is a response.  If this is a command,
-			  this will be the sequence number from the
-			  command. */
-
-	struct ipmi_msg msg; /* The data field must point to a buffer.
-				The data_size field must be set to the
-				size of the message buffer.  The
-				caller supplies the full buffer
-				length, this value is updated to the
-				actual message length when the message
-				is received. */
-};
-
-/*
- * Receive a message.  error values:
- *  - EAGAIN - no messages in the queue.
- *  - EFAULT - an address supplied was invalid.
- *  - EINVAL - The address supplied was not valid.
- *  - EMSGSIZE - The message to was too large to fit into the message buffer,
- *               the message will be left in the buffer. */
-#define IPMICTL_RECEIVE_MSG		_IOWR(IPMI_IOC_MAGIC, 12,	\
-					      struct ipmi_recv)
-
-/*
- * Like RECEIVE_MSG, but if the message won't fit in the buffer, it
- * will truncate the contents instead of leaving the data in the
- * buffer.
- */
-#define IPMICTL_RECEIVE_MSG_TRUNC	_IOWR(IPMI_IOC_MAGIC, 11,	\
-					      struct ipmi_recv)
-
-/* Register to get commands from other entities on this interface. */
-struct ipmi_cmdspec {
-	unsigned char netfn;
-	unsigned char cmd;
-};
-
-/*
- * Register to receive a specific command.  error values:
- *   - EFAULT - an address supplied was invalid.
- *   - EBUSY - The netfn/cmd supplied was already in use.
- *   - ENOMEM - could not allocate memory for the entry.
- */
-#define IPMICTL_REGISTER_FOR_CMD	_IOR(IPMI_IOC_MAGIC, 14,	\
-					     struct ipmi_cmdspec)
-/*
- * Unregister a regsitered command.  error values:
- *  - EFAULT - an address supplied was invalid.
- *  - ENOENT - The netfn/cmd was not found registered for this user.
- */
-#define IPMICTL_UNREGISTER_FOR_CMD	_IOR(IPMI_IOC_MAGIC, 15,	\
-					     struct ipmi_cmdspec)
-
-/*
- * Register to get commands from other entities on specific channels.
- * This way, you can only listen on specific channels, or have messages
- * from some channels go to one place and other channels to someplace
- * else.  The chans field is a bitmask, (1 << channel) for each channel.
- * It may be IPMI_CHAN_ALL for all channels.
- */
-struct ipmi_cmdspec_chans {
-	unsigned int netfn;
-	unsigned int cmd;
-	unsigned int chans;
-};
-
-/*
- * Register to receive a specific command on specific channels.  error values:
- *   - EFAULT - an address supplied was invalid.
- *   - EBUSY - One of the netfn/cmd/chans supplied was already in use.
- *   - ENOMEM - could not allocate memory for the entry.
- */
-#define IPMICTL_REGISTER_FOR_CMD_CHANS	_IOR(IPMI_IOC_MAGIC, 28,	\
-					     struct ipmi_cmdspec_chans)
-/*
- * Unregister some netfn/cmd/chans.  error values:
- *  - EFAULT - an address supplied was invalid.
- *  - ENOENT - None of the netfn/cmd/chans were found registered for this user.
- */
-#define IPMICTL_UNREGISTER_FOR_CMD_CHANS _IOR(IPMI_IOC_MAGIC, 29,	\
-					     struct ipmi_cmdspec_chans)
-
-/*
- * Set whether this interface receives events.  Note that the first
- * user registered for events will get all pending events for the
- * interface.  error values:
- *  - EFAULT - an address supplied was invalid.
- */
-#define IPMICTL_SET_GETS_EVENTS_CMD	_IOR(IPMI_IOC_MAGIC, 16, int)
-
-/*
- * Set and get the slave address and LUN that we will use for our
- * source messages.  Note that this affects the interface, not just
- * this user, so it will affect all users of this interface.  This is
- * so some initialization code can come in and do the OEM-specific
- * things it takes to determine your address (if not the BMC) and set
- * it for everyone else.  You should probably leave the LUN alone.
- */
-struct ipmi_channel_lun_address_set {
-	unsigned short channel;
-	unsigned char  value;
-};
-#define IPMICTL_SET_MY_CHANNEL_ADDRESS_CMD \
-	_IOR(IPMI_IOC_MAGIC, 24, struct ipmi_channel_lun_address_set)
-#define IPMICTL_GET_MY_CHANNEL_ADDRESS_CMD \
-	_IOR(IPMI_IOC_MAGIC, 25, struct ipmi_channel_lun_address_set)
-#define IPMICTL_SET_MY_CHANNEL_LUN_CMD \
-	_IOR(IPMI_IOC_MAGIC, 26, struct ipmi_channel_lun_address_set)
-#define IPMICTL_GET_MY_CHANNEL_LUN_CMD \
-	_IOR(IPMI_IOC_MAGIC, 27, struct ipmi_channel_lun_address_set)
-/* Legacy interfaces, these only set IPMB 0. */
-#define IPMICTL_SET_MY_ADDRESS_CMD	_IOR(IPMI_IOC_MAGIC, 17, unsigned int)
-#define IPMICTL_GET_MY_ADDRESS_CMD	_IOR(IPMI_IOC_MAGIC, 18, unsigned int)
-#define IPMICTL_SET_MY_LUN_CMD		_IOR(IPMI_IOC_MAGIC, 19, unsigned int)
-#define IPMICTL_GET_MY_LUN_CMD		_IOR(IPMI_IOC_MAGIC, 20, unsigned int)
-
-/*
- * Get/set the default timing values for an interface.  You shouldn't
- * generally mess with these.
- */
-struct ipmi_timing_parms {
-	int          retries;
-	unsigned int retry_time_ms;
-};
-#define IPMICTL_SET_TIMING_PARMS_CMD	_IOR(IPMI_IOC_MAGIC, 22, \
-					     struct ipmi_timing_parms)
-#define IPMICTL_GET_TIMING_PARMS_CMD	_IOR(IPMI_IOC_MAGIC, 23, \
-					     struct ipmi_timing_parms)
-
-/*
- * Set the maintenance mode.  See ipmi_set_maintenance_mode() above
- * for a description of what this does.
- */
-#define IPMICTL_GET_MAINTENANCE_MODE_CMD	_IOR(IPMI_IOC_MAGIC, 30, int)
-#define IPMICTL_SET_MAINTENANCE_MODE_CMD	_IOW(IPMI_IOC_MAGIC, 31, int)
-
-#endif /* __LINUX_IPMI_H */
diff --git a/ANDROID_3.4.5/include/linux/ipmi_msgdefs.h b/ANDROID_3.4.5/include/linux/ipmi_msgdefs.h
deleted file mode 100644
index df97e6e3..00000000
--- a/ANDROID_3.4.5/include/linux/ipmi_msgdefs.h
+++ /dev/null
@@ -1,121 +0,0 @@
-/*
- * ipmi_smi.h
- *
- * MontaVista IPMI system management interface
- *
- * Author: MontaVista Software, Inc.
- *         Corey Minyard <minyard@mvista.com>
- *         source@mvista.com
- *
- * Copyright 2002 MontaVista Software Inc.
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License as published by the
- *  Free Software Foundation; either version 2 of the License, or (at your
- *  option) any later version.
- *
- *
- *  THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- *  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
- *  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- *  BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- *  OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- *  ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
- *  TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
- *  USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __LINUX_IPMI_MSGDEFS_H
-#define __LINUX_IPMI_MSGDEFS_H
-
-/* Various definitions for IPMI messages used by almost everything in
-   the IPMI stack. */
-
-/* NetFNs and commands used inside the IPMI stack. */
-
-#define IPMI_NETFN_SENSOR_EVENT_REQUEST		0x04
-#define IPMI_NETFN_SENSOR_EVENT_RESPONSE	0x05
-#define IPMI_GET_EVENT_RECEIVER_CMD	0x01
-
-#define IPMI_NETFN_APP_REQUEST			0x06
-#define IPMI_NETFN_APP_RESPONSE			0x07
-#define IPMI_GET_DEVICE_ID_CMD		0x01
-#define IPMI_COLD_RESET_CMD		0x02
-#define IPMI_WARM_RESET_CMD		0x03
-#define IPMI_CLEAR_MSG_FLAGS_CMD	0x30
-#define IPMI_GET_DEVICE_GUID_CMD	0x08
-#define IPMI_GET_MSG_FLAGS_CMD		0x31
-#define IPMI_SEND_MSG_CMD		0x34
-#define IPMI_GET_MSG_CMD		0x33
-#define IPMI_SET_BMC_GLOBAL_ENABLES_CMD	0x2e
-#define IPMI_GET_BMC_GLOBAL_ENABLES_CMD	0x2f
-#define IPMI_READ_EVENT_MSG_BUFFER_CMD	0x35
-#define IPMI_GET_CHANNEL_INFO_CMD	0x42
-
-/* Bit for BMC global enables. */
-#define IPMI_BMC_RCV_MSG_INTR     0x01
-#define IPMI_BMC_EVT_MSG_INTR     0x02
-#define IPMI_BMC_EVT_MSG_BUFF     0x04
-#define IPMI_BMC_SYS_LOG          0x08
-
-#define IPMI_NETFN_STORAGE_REQUEST		0x0a
-#define IPMI_NETFN_STORAGE_RESPONSE		0x0b
-#define IPMI_ADD_SEL_ENTRY_CMD		0x44
-
-#define IPMI_NETFN_FIRMWARE_REQUEST		0x08
-#define IPMI_NETFN_FIRMWARE_RESPONSE		0x09
-
-/* The default slave address */
-#define IPMI_BMC_SLAVE_ADDR	0x20
-
-/* The BT interface on high-end HP systems supports up to 255 bytes in
- * one transfer.  Its "virtual" BMC supports some commands that are longer
- * than 128 bytes.  Use the full 256, plus NetFn/LUN, Cmd, cCode, plus
- * some overhead; it's not worth the effort to dynamically size this based
- * on the results of the "Get BT Capabilities" command. */
-#define IPMI_MAX_MSG_LENGTH	272	/* multiple of 16 */
-
-#define IPMI_CC_NO_ERROR		0x00
-#define IPMI_NODE_BUSY_ERR		0xc0
-#define IPMI_INVALID_COMMAND_ERR	0xc1
-#define IPMI_TIMEOUT_ERR		0xc3
-#define IPMI_ERR_MSG_TRUNCATED		0xc6
-#define IPMI_REQ_LEN_INVALID_ERR	0xc7
-#define IPMI_REQ_LEN_EXCEEDED_ERR	0xc8
-#define IPMI_NOT_IN_MY_STATE_ERR	0xd5	/* IPMI 2.0 */
-#define IPMI_LOST_ARBITRATION_ERR	0x81
-#define IPMI_BUS_ERR			0x82
-#define IPMI_NAK_ON_WRITE_ERR		0x83
-#define IPMI_ERR_UNSPECIFIED		0xff
-
-#define IPMI_CHANNEL_PROTOCOL_IPMB	1
-#define IPMI_CHANNEL_PROTOCOL_ICMB	2
-#define IPMI_CHANNEL_PROTOCOL_SMBUS	4
-#define IPMI_CHANNEL_PROTOCOL_KCS	5
-#define IPMI_CHANNEL_PROTOCOL_SMIC	6
-#define IPMI_CHANNEL_PROTOCOL_BT10	7
-#define IPMI_CHANNEL_PROTOCOL_BT15	8
-#define IPMI_CHANNEL_PROTOCOL_TMODE	9
-
-#define IPMI_CHANNEL_MEDIUM_IPMB	1
-#define IPMI_CHANNEL_MEDIUM_ICMB10	2
-#define IPMI_CHANNEL_MEDIUM_ICMB09	3
-#define IPMI_CHANNEL_MEDIUM_8023LAN	4
-#define IPMI_CHANNEL_MEDIUM_ASYNC	5
-#define IPMI_CHANNEL_MEDIUM_OTHER_LAN	6
-#define IPMI_CHANNEL_MEDIUM_PCI_SMBUS	7
-#define IPMI_CHANNEL_MEDIUM_SMBUS1	8
-#define IPMI_CHANNEL_MEDIUM_SMBUS2	9
-#define IPMI_CHANNEL_MEDIUM_USB1	10
-#define IPMI_CHANNEL_MEDIUM_USB2	11
-#define IPMI_CHANNEL_MEDIUM_SYSINTF	12
-#define IPMI_CHANNEL_MEDIUM_OEM_MIN	0x60
-#define IPMI_CHANNEL_MEDIUM_OEM_MAX	0x7f
-
-#endif /* __LINUX_IPMI_MSGDEFS_H */
diff --git a/ANDROID_3.4.5/include/linux/ipmi_smi.h b/ANDROID_3.4.5/include/linux/ipmi_smi.h
deleted file mode 100644
index fcb5d44e..00000000
--- a/ANDROID_3.4.5/include/linux/ipmi_smi.h
+++ /dev/null
@@ -1,242 +0,0 @@
-/*
- * ipmi_smi.h
- *
- * MontaVista IPMI system management interface
- *
- * Author: MontaVista Software, Inc.
- *         Corey Minyard <minyard@mvista.com>
- *         source@mvista.com
- *
- * Copyright 2002 MontaVista Software Inc.
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License as published by the
- *  Free Software Foundation; either version 2 of the License, or (at your
- *  option) any later version.
- *
- *
- *  THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- *  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
- *  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- *  BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- *  OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- *  ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
- *  TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
- *  USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __LINUX_IPMI_SMI_H
-#define __LINUX_IPMI_SMI_H
-
-#include <linux/ipmi_msgdefs.h>
-#include <linux/proc_fs.h>
-#include <linux/platform_device.h>
-#include <linux/ipmi.h>
-
-struct device;
-
-/* This files describes the interface for IPMI system management interface
-   drivers to bind into the IPMI message handler. */
-
-/* Structure for the low-level drivers. */
-typedef struct ipmi_smi *ipmi_smi_t;
-
-/*
- * Messages to/from the lower layer.  The smi interface will take one
- * of these to send. After the send has occurred and a response has
- * been received, it will report this same data structure back up to
- * the upper layer.  If an error occurs, it should fill in the
- * response with an error code in the completion code location. When
- * asynchronous data is received, one of these is allocated, the
- * data_size is set to zero and the response holds the data from the
- * get message or get event command that the interface initiated.
- * Note that it is the interfaces responsibility to detect
- * asynchronous data and messages and request them from the
- * interface.
- */
-struct ipmi_smi_msg {
-	struct list_head link;
-
-	long    msgid;
-	void    *user_data;
-
-	int           data_size;
-	unsigned char data[IPMI_MAX_MSG_LENGTH];
-
-	int           rsp_size;
-	unsigned char rsp[IPMI_MAX_MSG_LENGTH];
-
-	/* Will be called when the system is done with the message
-	   (presumably to free it). */
-	void (*done)(struct ipmi_smi_msg *msg);
-};
-
-struct ipmi_smi_handlers {
-	struct module *owner;
-
-	/* The low-level interface cannot start sending messages to
-	   the upper layer until this function is called.  This may
-	   not be NULL, the lower layer must take the interface from
-	   this call. */
-	int (*start_processing)(void       *send_info,
-				ipmi_smi_t new_intf);
-
-	/*
-	 * Get the detailed private info of the low level interface and store
-	 * it into the structure of ipmi_smi_data. For example: the
-	 * ACPI device handle will be returned for the pnp_acpi IPMI device.
-	 */
-	int (*get_smi_info)(void *send_info, struct ipmi_smi_info *data);
-
-	/* Called to enqueue an SMI message to be sent.  This
-	   operation is not allowed to fail.  If an error occurs, it
-	   should report back the error in a received message.  It may
-	   do this in the current call context, since no write locks
-	   are held when this is run.  If the priority is > 0, the
-	   message will go into a high-priority queue and be sent
-	   first.  Otherwise, it goes into a normal-priority queue. */
-	void (*sender)(void                *send_info,
-		       struct ipmi_smi_msg *msg,
-		       int                 priority);
-
-	/* Called by the upper layer to request that we try to get
-	   events from the BMC we are attached to. */
-	void (*request_events)(void *send_info);
-
-	/* Called when the interface should go into "run to
-	   completion" mode.  If this call sets the value to true, the
-	   interface should make sure that all messages are flushed
-	   out and that none are pending, and any new requests are run
-	   to completion immediately. */
-	void (*set_run_to_completion)(void *send_info, int run_to_completion);
-
-	/* Called to poll for work to do.  This is so upper layers can
-	   poll for operations during things like crash dumps. */
-	void (*poll)(void *send_info);
-
-	/* Enable/disable firmware maintenance mode.  Note that this
-	   is *not* the modes defined, this is simply an on/off
-	   setting.  The message handler does the mode handling.  Note
-	   that this is called from interrupt context, so it cannot
-	   block. */
-	void (*set_maintenance_mode)(void *send_info, int enable);
-
-	/* Tell the handler that we are using it/not using it.  The
-	   message handler get the modules that this handler belongs
-	   to; this function lets the SMI claim any modules that it
-	   uses.  These may be NULL if this is not required. */
-	int (*inc_usecount)(void *send_info);
-	void (*dec_usecount)(void *send_info);
-};
-
-struct ipmi_device_id {
-	unsigned char device_id;
-	unsigned char device_revision;
-	unsigned char firmware_revision_1;
-	unsigned char firmware_revision_2;
-	unsigned char ipmi_version;
-	unsigned char additional_device_support;
-	unsigned int  manufacturer_id;
-	unsigned int  product_id;
-	unsigned char aux_firmware_revision[4];
-	unsigned int  aux_firmware_revision_set : 1;
-};
-
-#define ipmi_version_major(v) ((v)->ipmi_version & 0xf)
-#define ipmi_version_minor(v) ((v)->ipmi_version >> 4)
-
-/* Take a pointer to a raw data buffer and a length and extract device
-   id information from it.  The first byte of data must point to the
-   netfn << 2, the data should be of the format:
-      netfn << 2, cmd, completion code, data
-   as normally comes from a device interface. */
-static inline int ipmi_demangle_device_id(const unsigned char *data,
-					  unsigned int data_len,
-					  struct ipmi_device_id *id)
-{
-	if (data_len < 9)
-		return -EINVAL;
-	if (data[0] != IPMI_NETFN_APP_RESPONSE << 2 ||
-	    data[1] != IPMI_GET_DEVICE_ID_CMD)
-		/* Strange, didn't get the response we expected. */
-		return -EINVAL;
-	if (data[2] != 0)
-		/* That's odd, it shouldn't be able to fail. */
-		return -EINVAL;
-
-	data += 3;
-	data_len -= 3;
-	id->device_id = data[0];
-	id->device_revision = data[1];
-	id->firmware_revision_1 = data[2];
-	id->firmware_revision_2 = data[3];
-	id->ipmi_version = data[4];
-	id->additional_device_support = data[5];
-	if (data_len >= 11) {
-		id->manufacturer_id = (data[6] | (data[7] << 8) |
-				       (data[8] << 16));
-		id->product_id = data[9] | (data[10] << 8);
-	} else {
-		id->manufacturer_id = 0;
-		id->product_id = 0;
-	}
-	if (data_len >= 15) {
-		memcpy(id->aux_firmware_revision, data+11, 4);
-		id->aux_firmware_revision_set = 1;
-	} else
-		id->aux_firmware_revision_set = 0;
-
-	return 0;
-}
-
-/* Add a low-level interface to the IPMI driver.  Note that if the
-   interface doesn't know its slave address, it should pass in zero.
-   The low-level interface should not deliver any messages to the
-   upper layer until the start_processing() function in the handlers
-   is called, and the lower layer must get the interface from that
-   call. */
-int ipmi_register_smi(struct ipmi_smi_handlers *handlers,
-		      void                     *send_info,
-		      struct ipmi_device_id    *device_id,
-		      struct device            *dev,
-		      const char               *sysfs_name,
-		      unsigned char            slave_addr);
-
-/*
- * Remove a low-level interface from the IPMI driver.  This will
- * return an error if the interface is still in use by a user.
- */
-int ipmi_unregister_smi(ipmi_smi_t intf);
-
-/*
- * The lower layer reports received messages through this interface.
- * The data_size should be zero if this is an asyncronous message.  If
- * the lower layer gets an error sending a message, it should format
- * an error response in the message response.
- */
-void ipmi_smi_msg_received(ipmi_smi_t          intf,
-			   struct ipmi_smi_msg *msg);
-
-/* The lower layer received a watchdog pre-timeout on interface. */
-void ipmi_smi_watchdog_pretimeout(ipmi_smi_t intf);
-
-struct ipmi_smi_msg *ipmi_alloc_smi_msg(void);
-static inline void ipmi_free_smi_msg(struct ipmi_smi_msg *msg)
-{
-	msg->done(msg);
-}
-
-/* Allow the lower layer to add things to the proc filesystem
-   directory for this interface.  Note that the entry will
-   automatically be dstroyed when the interface is destroyed. */
-int ipmi_smi_add_proc_entry(ipmi_smi_t smi, char *name,
-			    const struct file_operations *proc_ops,
-			    void *data);
-
-#endif /* __LINUX_IPMI_SMI_H */
diff --git a/ANDROID_3.4.5/include/linux/ipsec.h b/ANDROID_3.4.5/include/linux/ipsec.h
deleted file mode 100644
index d17a6302..00000000
--- a/ANDROID_3.4.5/include/linux/ipsec.h
+++ /dev/null
@@ -1,47 +0,0 @@
-#ifndef _LINUX_IPSEC_H
-#define _LINUX_IPSEC_H
-
-/* The definitions, required to talk to KAME racoon IKE. */
-
-#include <linux/pfkeyv2.h>
-
-#define IPSEC_PORT_ANY		0
-#define IPSEC_ULPROTO_ANY	255
-#define IPSEC_PROTO_ANY		255
-
-enum {
-	IPSEC_MODE_ANY		= 0,	/* We do not support this for SA */
-	IPSEC_MODE_TRANSPORT	= 1,
-	IPSEC_MODE_TUNNEL	= 2,
-	IPSEC_MODE_BEET         = 3
-};
-
-enum {
-	IPSEC_DIR_ANY		= 0,
-	IPSEC_DIR_INBOUND	= 1,
-	IPSEC_DIR_OUTBOUND	= 2,
-	IPSEC_DIR_FWD		= 3,	/* It is our own */
-	IPSEC_DIR_MAX		= 4,
-	IPSEC_DIR_INVALID	= 5
-};
-
-enum {
-	IPSEC_POLICY_DISCARD	= 0,
-	IPSEC_POLICY_NONE	= 1,
-	IPSEC_POLICY_IPSEC	= 2,
-	IPSEC_POLICY_ENTRUST	= 3,
-	IPSEC_POLICY_BYPASS	= 4
-};
-
-enum {
-	IPSEC_LEVEL_DEFAULT	= 0,
-	IPSEC_LEVEL_USE		= 1,
-	IPSEC_LEVEL_REQUIRE	= 2,
-	IPSEC_LEVEL_UNIQUE	= 3
-};
-
-#define IPSEC_MANUAL_REQID_MAX	0x3fff
-
-#define IPSEC_REPLAYWSIZE  32
-
-#endif	/* _LINUX_IPSEC_H */
diff --git a/ANDROID_3.4.5/include/linux/ipv6.h b/ANDROID_3.4.5/include/linux/ipv6.h
deleted file mode 100644
index 8260ef77..00000000
--- a/ANDROID_3.4.5/include/linux/ipv6.h
+++ /dev/null
@@ -1,544 +0,0 @@
-#ifndef _IPV6_H
-#define _IPV6_H
-
-#include <linux/types.h>
-#include <linux/in6.h>
-#include <asm/byteorder.h>
-
-/* The latest drafts declared increase in minimal mtu up to 1280. */
-
-#define IPV6_MIN_MTU	1280
-
-/*
- *	Advanced API
- *	source interface/address selection, source routing, etc...
- *	*under construction*
- */
-
-
-struct in6_pktinfo {
-	struct in6_addr	ipi6_addr;
-	int		ipi6_ifindex;
-};
-
-struct ip6_mtuinfo {
-	struct sockaddr_in6	ip6m_addr;
-	__u32			ip6m_mtu;
-};
-
-struct in6_ifreq {
-	struct in6_addr	ifr6_addr;
-	__u32		ifr6_prefixlen;
-	int		ifr6_ifindex; 
-};
-
-#define IPV6_SRCRT_STRICT	0x01	/* Deprecated; will be removed */
-#define IPV6_SRCRT_TYPE_0	0	/* Deprecated; will be removed */
-#define IPV6_SRCRT_TYPE_2	2	/* IPv6 type 2 Routing Header	*/
-
-/*
- *	routing header
- */
-struct ipv6_rt_hdr {
-	__u8		nexthdr;
-	__u8		hdrlen;
-	__u8		type;
-	__u8		segments_left;
-
-	/*
-	 *	type specific data
-	 *	variable length field
-	 */
-};
-
-
-struct ipv6_opt_hdr {
-	__u8 		nexthdr;
-	__u8 		hdrlen;
-	/* 
-	 * TLV encoded option data follows.
-	 */
-} __attribute__((packed));	/* required for some archs */
-
-#define ipv6_destopt_hdr ipv6_opt_hdr
-#define ipv6_hopopt_hdr  ipv6_opt_hdr
-
-#ifdef __KERNEL__
-#define ipv6_optlen(p)  (((p)->hdrlen+1) << 3)
-#endif
-
-/*
- *	routing header type 0 (used in cmsghdr struct)
- */
-
-struct rt0_hdr {
-	struct ipv6_rt_hdr	rt_hdr;
-	__u32			reserved;
-	struct in6_addr		addr[0];
-
-#define rt0_type		rt_hdr.type
-};
-
-/*
- *	routing header type 2
- */
-
-struct rt2_hdr {
-	struct ipv6_rt_hdr	rt_hdr;
-	__u32			reserved;
-	struct in6_addr		addr;
-
-#define rt2_type		rt_hdr.type
-};
-
-/*
- *	home address option in destination options header
- */
-
-struct ipv6_destopt_hao {
-	__u8			type;
-	__u8			length;
-	struct in6_addr		addr;
-} __attribute__((packed));
-
-/*
- *	IPv6 fixed header
- *
- *	BEWARE, it is incorrect. The first 4 bits of flow_lbl
- *	are glued to priority now, forming "class".
- */
-
-struct ipv6hdr {
-#if defined(__LITTLE_ENDIAN_BITFIELD)
-	__u8			priority:4,
-				version:4;
-#elif defined(__BIG_ENDIAN_BITFIELD)
-	__u8			version:4,
-				priority:4;
-#else
-#error	"Please fix <asm/byteorder.h>"
-#endif
-	__u8			flow_lbl[3];
-
-	__be16			payload_len;
-	__u8			nexthdr;
-	__u8			hop_limit;
-
-	struct	in6_addr	saddr;
-	struct	in6_addr	daddr;
-};
-
-#ifdef __KERNEL__
-/*
- * This structure contains configuration options per IPv6 link.
- */
-struct ipv6_devconf {
-	__s32		forwarding;
-	__s32		hop_limit;
-	__s32		mtu6;
-	__s32		accept_ra;
-	__s32		accept_redirects;
-	__s32		autoconf;
-	__s32		dad_transmits;
-	__s32		rtr_solicits;
-	__s32		rtr_solicit_interval;
-	__s32		rtr_solicit_delay;
-	__s32		force_mld_version;
-#ifdef CONFIG_IPV6_PRIVACY
-	__s32		use_tempaddr;
-	__s32		temp_valid_lft;
-	__s32		temp_prefered_lft;
-	__s32		regen_max_retry;
-	__s32		max_desync_factor;
-#endif
-	__s32		max_addresses;
-	__s32		accept_ra_defrtr;
-	__s32		accept_ra_pinfo;
-#ifdef CONFIG_IPV6_ROUTER_PREF
-	__s32		accept_ra_rtr_pref;
-	__s32		rtr_probe_interval;
-#ifdef CONFIG_IPV6_ROUTE_INFO
-	__s32		accept_ra_rt_info_max_plen;
-#endif
-#endif
-	__s32		proxy_ndp;
-	__s32		accept_source_route;
-#ifdef CONFIG_IPV6_OPTIMISTIC_DAD
-	__s32		optimistic_dad;
-#endif
-#ifdef CONFIG_IPV6_MROUTE
-	__s32		mc_forwarding;
-#endif
-	__s32		disable_ipv6;
-	__s32		accept_dad;
-	__s32		force_tllao;
-	void		*sysctl;
-};
-
-struct ipv6_params {
-	__s32 disable_ipv6;
-	__s32 autoconf;
-};
-extern struct ipv6_params ipv6_defaults;
-#endif
-
-/* index values for the variables in ipv6_devconf */
-enum {
-	DEVCONF_FORWARDING = 0,
-	DEVCONF_HOPLIMIT,
-	DEVCONF_MTU6,
-	DEVCONF_ACCEPT_RA,
-	DEVCONF_ACCEPT_REDIRECTS,
-	DEVCONF_AUTOCONF,
-	DEVCONF_DAD_TRANSMITS,
-	DEVCONF_RTR_SOLICITS,
-	DEVCONF_RTR_SOLICIT_INTERVAL,
-	DEVCONF_RTR_SOLICIT_DELAY,
-	DEVCONF_USE_TEMPADDR,
-	DEVCONF_TEMP_VALID_LFT,
-	DEVCONF_TEMP_PREFERED_LFT,
-	DEVCONF_REGEN_MAX_RETRY,
-	DEVCONF_MAX_DESYNC_FACTOR,
-	DEVCONF_MAX_ADDRESSES,
-	DEVCONF_FORCE_MLD_VERSION,
-	DEVCONF_ACCEPT_RA_DEFRTR,
-	DEVCONF_ACCEPT_RA_PINFO,
-	DEVCONF_ACCEPT_RA_RTR_PREF,
-	DEVCONF_RTR_PROBE_INTERVAL,
-	DEVCONF_ACCEPT_RA_RT_INFO_MAX_PLEN,
-	DEVCONF_PROXY_NDP,
-	DEVCONF_OPTIMISTIC_DAD,
-	DEVCONF_ACCEPT_SOURCE_ROUTE,
-	DEVCONF_MC_FORWARDING,
-	DEVCONF_DISABLE_IPV6,
-	DEVCONF_ACCEPT_DAD,
-	DEVCONF_FORCE_TLLAO,
-	DEVCONF_MAX
-};
-
-#ifdef __KERNEL__
-#include <linux/icmpv6.h>
-#include <linux/tcp.h>
-#include <linux/udp.h>
-
-#include <net/inet_sock.h>
-
-static inline struct ipv6hdr *ipv6_hdr(const struct sk_buff *skb)
-{
-	return (struct ipv6hdr *)skb_network_header(skb);
-}
-
-static inline struct ipv6hdr *ipipv6_hdr(const struct sk_buff *skb)
-{
-	return (struct ipv6hdr *)skb_transport_header(skb);
-}
-
-static inline __u8 ipv6_tclass(const struct ipv6hdr *iph)
-{
-	return (ntohl(*(__be32 *)iph) >> 20) & 0xff;
-}
-
-/* 
-   This structure contains results of exthdrs parsing
-   as offsets from skb->nh.
- */
-
-struct inet6_skb_parm {
-	int			iif;
-	__u16			ra;
-	__u16			hop;
-	__u16			dst0;
-	__u16			srcrt;
-	__u16			dst1;
-	__u16			lastopt;
-	__u16			nhoff;
-	__u16			flags;
-#if defined(CONFIG_IPV6_MIP6) || defined(CONFIG_IPV6_MIP6_MODULE)
-	__u16			dsthao;
-#endif
-
-#define IP6SKB_XFRM_TRANSFORMED	1
-#define IP6SKB_FORWARDED	2
-#define IP6SKB_REROUTED		4
-};
-
-#define IP6CB(skb)	((struct inet6_skb_parm*)((skb)->cb))
-#define IP6CBMTU(skb)	((struct ip6_mtuinfo *)((skb)->cb))
-
-static inline int inet6_iif(const struct sk_buff *skb)
-{
-	return IP6CB(skb)->iif;
-}
-
-struct inet6_request_sock {
-	struct in6_addr		loc_addr;
-	struct in6_addr		rmt_addr;
-	struct sk_buff		*pktopts;
-	int			iif;
-};
-
-struct tcp6_request_sock {
-	struct tcp_request_sock	  tcp6rsk_tcp;
-	struct inet6_request_sock tcp6rsk_inet6;
-};
-
-struct ipv6_mc_socklist;
-struct ipv6_ac_socklist;
-struct ipv6_fl_socklist;
-
-/**
- * struct ipv6_pinfo - ipv6 private area
- *
- * In the struct sock hierarchy (tcp6_sock, upd6_sock, etc)
- * this _must_ be the last member, so that inet6_sk_generic
- * is able to calculate its offset from the base struct sock
- * by using the struct proto->slab_obj_size member. -acme
- */
-struct ipv6_pinfo {
-	struct in6_addr 	saddr;
-	struct in6_addr 	rcv_saddr;
-	struct in6_addr		daddr;
-	struct in6_pktinfo	sticky_pktinfo;
-	struct in6_addr		*daddr_cache;
-#ifdef CONFIG_IPV6_SUBTREES
-	struct in6_addr		*saddr_cache;
-#endif
-
-	__be32			flow_label;
-	__u32			frag_size;
-
-	/*
-	 * Packed in 16bits.
-	 * Omit one shift by by putting the signed field at MSB.
-	 */
-#if defined(__BIG_ENDIAN_BITFIELD)
-	__s16			hop_limit:9;
-	__u16			__unused_1:7;
-#else
-	__u16			__unused_1:7;
-	__s16			hop_limit:9;
-#endif
-
-#if defined(__BIG_ENDIAN_BITFIELD)
-	/* Packed in 16bits. */
-	__s16			mcast_hops:9;
-	__u16			__unused_2:6,
-				mc_loop:1;
-#else
-	__u16			mc_loop:1,
-				__unused_2:6;
-	__s16			mcast_hops:9;
-#endif
-	int			ucast_oif;
-	int			mcast_oif;
-
-	/* pktoption flags */
-	union {
-		struct {
-			__u16	srcrt:1,
-				osrcrt:1,
-			        rxinfo:1,
-			        rxoinfo:1,
-				rxhlim:1,
-				rxohlim:1,
-				hopopts:1,
-				ohopopts:1,
-				dstopts:1,
-				odstopts:1,
-                                rxflow:1,
-				rxtclass:1,
-				rxpmtu:1,
-				rxorigdstaddr:1;
-				/* 2 bits hole */
-		} bits;
-		__u16		all;
-	} rxopt;
-
-	/* sockopt flags */
-	__u16			recverr:1,
-	                        sndflow:1,
-				pmtudisc:2,
-				ipv6only:1,
-				srcprefs:3,	/* 001: prefer temporary address
-						 * 010: prefer public address
-						 * 100: prefer care-of address
-						 */
-				dontfrag:1;
-	__u8			min_hopcount;
-	__u8			tclass;
-	__u8			rcv_tclass;
-
-	__u32			dst_cookie;
-
-	struct ipv6_mc_socklist	__rcu *ipv6_mc_list;
-	struct ipv6_ac_socklist	*ipv6_ac_list;
-	struct ipv6_fl_socklist *ipv6_fl_list;
-
-	struct ipv6_txoptions	*opt;
-	struct sk_buff		*pktoptions;
-	struct sk_buff		*rxpmtu;
-	struct {
-		struct ipv6_txoptions *opt;
-		u8 hop_limit;
-		u8 tclass;
-	} cork;
-};
-
-/* WARNING: don't change the layout of the members in {raw,udp,tcp}6_sock! */
-struct raw6_sock {
-	/* inet_sock has to be the first member of raw6_sock */
-	struct inet_sock	inet;
-	__u32			checksum;	/* perform checksum */
-	__u32			offset;		/* checksum offset  */
-	struct icmp6_filter	filter;
-	__u32			ip6mr_table;
-	/* ipv6_pinfo has to be the last member of raw6_sock, see inet6_sk_generic */
-	struct ipv6_pinfo	inet6;
-};
-
-struct udp6_sock {
-	struct udp_sock	  udp;
-	/* ipv6_pinfo has to be the last member of udp6_sock, see inet6_sk_generic */
-	struct ipv6_pinfo inet6;
-};
-
-struct tcp6_sock {
-	struct tcp_sock	  tcp;
-	/* ipv6_pinfo has to be the last member of tcp6_sock, see inet6_sk_generic */
-	struct ipv6_pinfo inet6;
-};
-
-extern int inet6_sk_rebuild_header(struct sock *sk);
-
-#if IS_ENABLED(CONFIG_IPV6)
-static inline struct ipv6_pinfo * inet6_sk(const struct sock *__sk)
-{
-	return inet_sk(__sk)->pinet6;
-}
-
-static inline struct inet6_request_sock *
-			inet6_rsk(const struct request_sock *rsk)
-{
-	return (struct inet6_request_sock *)(((u8 *)rsk) +
-					     inet_rsk(rsk)->inet6_rsk_offset);
-}
-
-static inline u32 inet6_rsk_offset(struct request_sock *rsk)
-{
-	return rsk->rsk_ops->obj_size - sizeof(struct inet6_request_sock);
-}
-
-static inline struct request_sock *inet6_reqsk_alloc(struct request_sock_ops *ops)
-{
-	struct request_sock *req = reqsk_alloc(ops);
-
-	if (req != NULL) {
-		inet_rsk(req)->inet6_rsk_offset = inet6_rsk_offset(req);
-		inet6_rsk(req)->pktopts = NULL;
-	}
-
-	return req;
-}
-
-static inline struct raw6_sock *raw6_sk(const struct sock *sk)
-{
-	return (struct raw6_sock *)sk;
-}
-
-static inline void inet_sk_copy_descendant(struct sock *sk_to,
-					   const struct sock *sk_from)
-{
-	int ancestor_size = sizeof(struct inet_sock);
-
-	if (sk_from->sk_family == PF_INET6)
-		ancestor_size += sizeof(struct ipv6_pinfo);
-
-	__inet_sk_copy_descendant(sk_to, sk_from, ancestor_size);
-}
-
-#define __ipv6_only_sock(sk)	(inet6_sk(sk)->ipv6only)
-#define ipv6_only_sock(sk)	((sk)->sk_family == PF_INET6 && __ipv6_only_sock(sk))
-
-struct inet6_timewait_sock {
-	struct in6_addr tw_v6_daddr;
-	struct in6_addr	tw_v6_rcv_saddr;
-};
-
-struct tcp6_timewait_sock {
-	struct tcp_timewait_sock   tcp6tw_tcp;
-	struct inet6_timewait_sock tcp6tw_inet6;
-};
-
-static inline u16 inet6_tw_offset(const struct proto *prot)
-{
-	return prot->twsk_prot->twsk_obj_size -
-			sizeof(struct inet6_timewait_sock);
-}
-
-static inline struct inet6_timewait_sock *inet6_twsk(const struct sock *sk)
-{
-	return (struct inet6_timewait_sock *)(((u8 *)sk) +
-					      inet_twsk(sk)->tw_ipv6_offset);
-}
-
-static inline struct in6_addr *__inet6_rcv_saddr(const struct sock *sk)
-{
-	return likely(sk->sk_state != TCP_TIME_WAIT) ?
-		&inet6_sk(sk)->rcv_saddr : &inet6_twsk(sk)->tw_v6_rcv_saddr;
-}
-
-static inline struct in6_addr *inet6_rcv_saddr(const struct sock *sk)
-{
-	return sk->sk_family == AF_INET6 ? __inet6_rcv_saddr(sk) : NULL;
-}
-
-static inline int inet_v6_ipv6only(const struct sock *sk)
-{
-	return likely(sk->sk_state != TCP_TIME_WAIT) ?
-		ipv6_only_sock(sk) : inet_twsk(sk)->tw_ipv6only;
-}
-#else
-#define __ipv6_only_sock(sk)	0
-#define ipv6_only_sock(sk)	0
-
-static inline struct ipv6_pinfo * inet6_sk(const struct sock *__sk)
-{
-	return NULL;
-}
-
-static inline struct inet6_request_sock *
-			inet6_rsk(const struct request_sock *rsk)
-{
-	return NULL;
-}
-
-static inline struct raw6_sock *raw6_sk(const struct sock *sk)
-{
-	return NULL;
-}
-
-#define __inet6_rcv_saddr(__sk)	NULL
-#define inet6_rcv_saddr(__sk)	NULL
-#define tcp_twsk_ipv6only(__sk)		0
-#define inet_v6_ipv6only(__sk)		0
-#endif /* IS_ENABLED(CONFIG_IPV6) */
-
-#define INET6_MATCH(__sk, __net, __hash, __saddr, __daddr, __ports, __dif)\
-	(((__sk)->sk_hash == (__hash)) && sock_net((__sk)) == (__net)	&& \
-	 ((*((__portpair *)&(inet_sk(__sk)->inet_dport))) == (__ports)) && \
-	 ((__sk)->sk_family		== AF_INET6)		&& \
-	 ipv6_addr_equal(&inet6_sk(__sk)->daddr, (__saddr))	&& \
-	 ipv6_addr_equal(&inet6_sk(__sk)->rcv_saddr, (__daddr))	&& \
-	 (!((__sk)->sk_bound_dev_if) || ((__sk)->sk_bound_dev_if == (__dif))))
-
-#define INET6_TW_MATCH(__sk, __net, __hash, __saddr, __daddr, __ports, __dif) \
-	(((__sk)->sk_hash == (__hash)) && sock_net((__sk)) == (__net)	&& \
-	 (*((__portpair *)&(inet_twsk(__sk)->tw_dport)) == (__ports))	&& \
-	 ((__sk)->sk_family	       == PF_INET6)			&& \
-	 (ipv6_addr_equal(&inet6_twsk(__sk)->tw_v6_daddr, (__saddr)))	&& \
-	 (ipv6_addr_equal(&inet6_twsk(__sk)->tw_v6_rcv_saddr, (__daddr))) && \
-	 (!((__sk)->sk_bound_dev_if) || ((__sk)->sk_bound_dev_if == (__dif))))
-
-#endif /* __KERNEL__ */
-
-#endif /* _IPV6_H */
diff --git a/ANDROID_3.4.5/include/linux/ipv6_route.h b/ANDROID_3.4.5/include/linux/ipv6_route.h
deleted file mode 100644
index 1e7d8af2..00000000
--- a/ANDROID_3.4.5/include/linux/ipv6_route.h
+++ /dev/null
@@ -1,62 +0,0 @@
-/*
- *	Linux INET6 implementation 
- *
- *	Authors:
- *	Pedro Roque		<roque@di.fc.ul.pt>	
- *
- *	This program is free software; you can redistribute it and/or
- *      modify it under the terms of the GNU General Public License
- *      as published by the Free Software Foundation; either version
- *      2 of the License, or (at your option) any later version.
- */
-
-#ifndef _LINUX_IPV6_ROUTE_H
-#define _LINUX_IPV6_ROUTE_H
-
-#include <linux/types.h>
-
-#define RTF_DEFAULT	0x00010000	/* default - learned via ND	*/
-#define RTF_ALLONLINK	0x00020000	/* (deprecated and will be removed)
-					   fallback, no routers on link */
-#define RTF_ADDRCONF	0x00040000	/* addrconf route - RA		*/
-#define RTF_PREFIX_RT	0x00080000	/* A prefix only route - RA	*/
-#define RTF_ANYCAST	0x00100000	/* Anycast			*/
-
-#define RTF_NONEXTHOP	0x00200000	/* route with no nexthop	*/
-#define RTF_EXPIRES	0x00400000
-
-#define RTF_ROUTEINFO	0x00800000	/* route information - RA	*/
-
-#define RTF_CACHE	0x01000000	/* cache entry			*/
-#define RTF_FLOW	0x02000000	/* flow significant route	*/
-#define RTF_POLICY	0x04000000	/* policy route			*/
-
-#define RTF_PREF(pref)	((pref) << 27)
-#define RTF_PREF_MASK	0x18000000
-
-#define RTF_LOCAL	0x80000000
-
-#ifdef __KERNEL__
-#define IPV6_EXTRACT_PREF(flag)	(((flag) & RTF_PREF_MASK) >> 27)
-#define IPV6_DECODE_PREF(pref)	((pref) ^ 2)	/* 1:low,2:med,3:high */
-#endif
-
-struct in6_rtmsg {
-	struct in6_addr		rtmsg_dst;
-	struct in6_addr		rtmsg_src;
-	struct in6_addr		rtmsg_gateway;
-	__u32			rtmsg_type;
-	__u16			rtmsg_dst_len;
-	__u16			rtmsg_src_len;
-	__u32			rtmsg_metric;
-	unsigned long		rtmsg_info;
-        __u32			rtmsg_flags;
-	int			rtmsg_ifindex;
-};
-
-#define RTMSG_NEWDEVICE		0x11
-#define RTMSG_DELDEVICE		0x12
-#define RTMSG_NEWROUTE		0x21
-#define RTMSG_DELROUTE		0x22
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/ipx.h b/ANDROID_3.4.5/include/linux/ipx.h
deleted file mode 100644
index 3d48014c..00000000
--- a/ANDROID_3.4.5/include/linux/ipx.h
+++ /dev/null
@@ -1,75 +0,0 @@
-#ifndef _IPX_H_
-#define _IPX_H_
-#include <linux/types.h>
-#include <linux/sockios.h>
-#include <linux/socket.h>
-#define IPX_NODE_LEN	6
-#define IPX_MTU		576
-
-struct sockaddr_ipx {
-	__kernel_sa_family_t sipx_family;
-	__be16		sipx_port;
-	__be32		sipx_network;
-	unsigned char 	sipx_node[IPX_NODE_LEN];
-	__u8		sipx_type;
-	unsigned char	sipx_zero;	/* 16 byte fill */
-};
-
-/*
- * So we can fit the extra info for SIOCSIFADDR into the address nicely
- */
-#define sipx_special	sipx_port
-#define sipx_action	sipx_zero
-#define IPX_DLTITF	0
-#define IPX_CRTITF	1
-
-struct ipx_route_definition {
-	__be32        ipx_network;
-	__be32        ipx_router_network;
-	unsigned char ipx_router_node[IPX_NODE_LEN];
-};
-
-struct ipx_interface_definition {
-	__be32        ipx_network;
-	unsigned char ipx_device[16];
-	unsigned char ipx_dlink_type;
-#define IPX_FRAME_NONE		0
-#define IPX_FRAME_SNAP		1
-#define IPX_FRAME_8022		2
-#define IPX_FRAME_ETHERII	3
-#define IPX_FRAME_8023		4
-#define IPX_FRAME_TR_8022       5 /* obsolete */
-	unsigned char ipx_special;
-#define IPX_SPECIAL_NONE	0
-#define IPX_PRIMARY		1
-#define IPX_INTERNAL		2
-	unsigned char ipx_node[IPX_NODE_LEN];
-};
-	
-struct ipx_config_data {
-	unsigned char	ipxcfg_auto_select_primary;
-	unsigned char	ipxcfg_auto_create_interfaces;
-};
-
-/*
- * OLD Route Definition for backward compatibility.
- */
-
-struct ipx_route_def {
-	__be32		ipx_network;
-	__be32		ipx_router_network;
-#define IPX_ROUTE_NO_ROUTER	0
-	unsigned char	ipx_router_node[IPX_NODE_LEN];
-	unsigned char	ipx_device[16];
-	unsigned short	ipx_flags;
-#define IPX_RT_SNAP		8
-#define IPX_RT_8022		4
-#define IPX_RT_BLUEBOOK		2
-#define IPX_RT_ROUTED		1
-};
-
-#define SIOCAIPXITFCRT		(SIOCPROTOPRIVATE)
-#define SIOCAIPXPRISLT		(SIOCPROTOPRIVATE + 1)
-#define SIOCIPXCFGDATA		(SIOCPROTOPRIVATE + 2)
-#define SIOCIPXNCPCONN		(SIOCPROTOPRIVATE + 3)
-#endif /* _IPX_H_ */
diff --git a/ANDROID_3.4.5/include/linux/irda.h b/ANDROID_3.4.5/include/linux/irda.h
deleted file mode 100644
index a014c325..00000000
--- a/ANDROID_3.4.5/include/linux/irda.h
+++ /dev/null
@@ -1,251 +0,0 @@
-/*********************************************************************
- *                
- * Filename:      irda.h
- * Version:       
- * Description:   
- * Status:        Experimental.
- * Author:        Dag Brattli <dagb@cs.uit.no>
- * Created at:    Mon Mar  8 14:06:12 1999
- * Modified at:   Sat Dec 25 16:06:42 1999
- * Modified by:   Dag Brattli <dagb@cs.uit.no>
- * 
- *     Copyright (c) 1999 Dag Brattli, All Rights Reserved.
- *      
- *     This program is free software; you can redistribute it and/or 
- *     modify it under the terms of the GNU General Public License as 
- *     published by the Free Software Foundation; either version 2 of 
- *     the License, or (at your option) any later version.
- *  
- *     Neither Dag Brattli nor University of Tromsø admit liability nor
- *     provide warranty for any of this software. This material is 
- *     provided "AS-IS" and at no charge.
- *
- ********************************************************************/
-
-#ifndef KERNEL_IRDA_H
-#define KERNEL_IRDA_H
-
-#include <linux/types.h>
-#include <linux/socket.h>
-
-/* Note that this file is shared with user space. */
-
-/* Hint bit positions for first hint byte */
-#define HINT_PNP         0x01
-#define HINT_PDA         0x02
-#define HINT_COMPUTER    0x04
-#define HINT_PRINTER     0x08
-#define HINT_MODEM       0x10
-#define HINT_FAX         0x20
-#define HINT_LAN         0x40
-#define HINT_EXTENSION   0x80
-
-/* Hint bit positions for second hint byte (first extension byte) */
-#define HINT_TELEPHONY   0x01
-#define HINT_FILE_SERVER 0x02
-#define HINT_COMM        0x04
-#define HINT_MESSAGE     0x08
-#define HINT_HTTP        0x10
-#define HINT_OBEX        0x20
-
-/* IrLMP character code values */
-#define CS_ASCII         0x00
-#define	CS_ISO_8859_1    0x01
-#define	CS_ISO_8859_2    0x02
-#define	CS_ISO_8859_3    0x03
-#define	CS_ISO_8859_4    0x04
-#define	CS_ISO_8859_5    0x05
-#define	CS_ISO_8859_6    0x06
-#define	CS_ISO_8859_7    0x07
-#define	CS_ISO_8859_8    0x08
-#define	CS_ISO_8859_9    0x09
-#define CS_UNICODE       0xff
-
-/* These are the currently known dongles */
-typedef enum {
-	IRDA_TEKRAM_DONGLE       = 0,
-	IRDA_ESI_DONGLE          = 1,
-	IRDA_ACTISYS_DONGLE      = 2,
-	IRDA_ACTISYS_PLUS_DONGLE = 3,
-	IRDA_GIRBIL_DONGLE       = 4,
-	IRDA_LITELINK_DONGLE     = 5,
-	IRDA_AIRPORT_DONGLE      = 6,
-	IRDA_OLD_BELKIN_DONGLE   = 7,
-	IRDA_EP7211_IR           = 8,
-	IRDA_MCP2120_DONGLE      = 9,
-	IRDA_ACT200L_DONGLE      = 10,
-	IRDA_MA600_DONGLE        = 11,
-	IRDA_TOIM3232_DONGLE     = 12,
-	IRDA_EP7211_DONGLE       = 13,
-} IRDA_DONGLE;
-
-/* Protocol types to be used for SOCK_DGRAM */
-enum {
-	IRDAPROTO_UNITDATA = 0,
-	IRDAPROTO_ULTRA    = 1,
-	IRDAPROTO_MAX
-};
-
-#define SOL_IRLMP      266 /* Same as SOL_IRDA for now */
-#define SOL_IRTTP      266 /* Same as SOL_IRDA for now */
-
-#define IRLMP_ENUMDEVICES        1	/* Return discovery log */
-#define IRLMP_IAS_SET            2	/* Set an attribute in local IAS */
-#define IRLMP_IAS_QUERY          3	/* Query remote IAS for attribute */
-#define IRLMP_HINTS_SET          4	/* Set hint bits advertised */
-#define IRLMP_QOS_SET            5
-#define IRLMP_QOS_GET            6
-#define IRLMP_MAX_SDU_SIZE       7
-#define IRLMP_IAS_GET            8	/* Get an attribute from local IAS */
-#define IRLMP_IAS_DEL		 9	/* Remove attribute from local IAS */
-#define IRLMP_HINT_MASK_SET	10	/* Set discovery filter */
-#define IRLMP_WAITDEVICE	11	/* Wait for a new discovery */
-
-#define IRTTP_MAX_SDU_SIZE IRLMP_MAX_SDU_SIZE /* Compatibility */
-
-#define IAS_MAX_STRING         256	/* See IrLMP 1.1, 4.3.3.2 */
-#define IAS_MAX_OCTET_STRING  1024	/* See IrLMP 1.1, 4.3.3.2 */
-#define IAS_MAX_CLASSNAME       60	/* See IrLMP 1.1, 4.3.1 */
-#define IAS_MAX_ATTRIBNAME      60	/* See IrLMP 1.1, 4.3.3.1 */
-#define IAS_MAX_ATTRIBNUMBER   256	/* See IrLMP 1.1, 4.3.3.1 */
-/* For user space backward compatibility - may be fixed in kernel 2.5.X
- * Note : need 60+1 ('\0'), make it 64 for alignement - Jean II */
-#define IAS_EXPORT_CLASSNAME       64
-#define IAS_EXPORT_ATTRIBNAME     256
-
-/* Attribute type needed for struct irda_ias_set */
-#define IAS_MISSING 0
-#define IAS_INTEGER 1
-#define IAS_OCT_SEQ 2
-#define IAS_STRING  3
-
-#define LSAP_ANY              0xff
-
-struct sockaddr_irda {
-	__kernel_sa_family_t sir_family; /* AF_IRDA */
-	__u8        sir_lsap_sel; /* LSAP selector */
-	__u32       sir_addr;     /* Device address */
-	char        sir_name[25]; /* Usually <service>:IrDA:TinyTP */
-};
-
-struct irda_device_info {
-	__u32       saddr;    /* Address of local interface */
-	__u32       daddr;    /* Address of remote device */
-	char        info[22]; /* Description */
-	__u8        charset;  /* Charset used for description */
-	__u8        hints[2]; /* Hint bits */
-};
-
-struct irda_device_list {
-       __u32 len;
-       struct irda_device_info dev[1];
-};
-
-struct irda_ias_set {
-	char irda_class_name[IAS_EXPORT_CLASSNAME];
-	char irda_attrib_name[IAS_EXPORT_ATTRIBNAME];
-	unsigned int irda_attrib_type;
-	union {
-		unsigned int irda_attrib_int;
-		struct {
-			unsigned short len;
-			__u8 octet_seq[IAS_MAX_OCTET_STRING];
-		} irda_attrib_octet_seq;
-		struct {
-			__u8 len;
-			__u8 charset;
-			__u8 string[IAS_MAX_STRING];
-		} irda_attrib_string;
-	} attribute;
-	__u32       daddr;    /* Address of device (for some queries only) */
-};
-
-/* Some private IOCTL's (max 16) */
-#define SIOCSDONGLE    (SIOCDEVPRIVATE + 0)
-#define SIOCGDONGLE    (SIOCDEVPRIVATE + 1)
-#define SIOCSBANDWIDTH (SIOCDEVPRIVATE + 2)
-#define SIOCSMEDIABUSY (SIOCDEVPRIVATE + 3)
-#define SIOCGMEDIABUSY (SIOCDEVPRIVATE + 4)
-#define SIOCGRECEIVING (SIOCDEVPRIVATE + 5)
-#define SIOCSMODE      (SIOCDEVPRIVATE + 6)
-#define SIOCGMODE      (SIOCDEVPRIVATE + 7)
-#define SIOCSDTRRTS    (SIOCDEVPRIVATE + 8)
-#define SIOCGQOS       (SIOCDEVPRIVATE + 9)
-
-/* No reason to include <linux/if.h> just because of this one ;-) */
-#define IRNAMSIZ 16 
-
-/* IrDA quality of service information (must not exceed 16 bytes) */
-struct if_irda_qos {
-	unsigned long  baudrate;
-	unsigned short data_size;
-	unsigned short window_size;
-	unsigned short min_turn_time;
-	unsigned short max_turn_time;
-	unsigned char  add_bofs;
-	unsigned char  link_disc;
-};
-
-/* For setting RTS and DTR lines of a dongle */
-struct if_irda_line {
-	__u8 dtr;
-	__u8 rts;
-};
-
-/* IrDA interface configuration (data part must not exceed 16 bytes) */
-struct if_irda_req {
-	union {
-		char ifrn_name[IRNAMSIZ];  /* if name, e.g. "irda0" */
-	} ifr_ifrn;
-	
-	/* Data part */
-	union {
-		struct if_irda_line ifru_line;
-		struct if_irda_qos  ifru_qos;
-		unsigned short      ifru_flags;
-		unsigned int        ifru_receiving;
-		unsigned int        ifru_mode;
-		unsigned int        ifru_dongle;
-	} ifr_ifru;
-};
-
-#define ifr_baudrate  ifr_ifru.ifru_qos.baudrate
-#define ifr_receiving ifr_ifru.ifru_receiving 
-#define ifr_dongle    ifr_ifru.ifru_dongle
-#define ifr_mode      ifr_ifru.ifru_mode
-#define ifr_dtr       ifr_ifru.ifru_line.dtr
-#define ifr_rts       ifr_ifru.ifru_line.rts
-
-
-/* IrDA netlink definitions */
-#define IRDA_NL_NAME "irda"
-#define IRDA_NL_VERSION 1
-
-enum irda_nl_commands {
-	IRDA_NL_CMD_UNSPEC,
-	IRDA_NL_CMD_SET_MODE,
-	IRDA_NL_CMD_GET_MODE,
-
-	__IRDA_NL_CMD_AFTER_LAST
-};
-#define IRDA_NL_CMD_MAX (__IRDA_NL_CMD_AFTER_LAST - 1)
-
-enum nl80211_attrs {
-	IRDA_NL_ATTR_UNSPEC,
-	IRDA_NL_ATTR_IFNAME,
-	IRDA_NL_ATTR_MODE,
-
-	__IRDA_NL_ATTR_AFTER_LAST
-};
-#define IRDA_NL_ATTR_MAX (__IRDA_NL_ATTR_AFTER_LAST - 1)
-
-/* IrDA modes */
-#define IRDA_MODE_PRIMARY   0x1
-#define IRDA_MODE_SECONDARY 0x2
-#define IRDA_MODE_MONITOR   0x4
-
-#endif /* KERNEL_IRDA_H */
-
-
-
-
diff --git a/ANDROID_3.4.5/include/linux/irq.h b/ANDROID_3.4.5/include/linux/irq.h
deleted file mode 100644
index b27cfcfd..00000000
--- a/ANDROID_3.4.5/include/linux/irq.h
+++ /dev/null
@@ -1,752 +0,0 @@
-#ifndef _LINUX_IRQ_H
-#define _LINUX_IRQ_H
-
-/*
- * Please do not include this file in generic code.  There is currently
- * no requirement for any architecture to implement anything held
- * within this file.
- *
- * Thanks. --rmk
- */
-
-#include <linux/smp.h>
-
-#ifndef CONFIG_S390
-
-#include <linux/linkage.h>
-#include <linux/cache.h>
-#include <linux/spinlock.h>
-#include <linux/cpumask.h>
-#include <linux/gfp.h>
-#include <linux/irqreturn.h>
-#include <linux/irqnr.h>
-#include <linux/errno.h>
-#include <linux/topology.h>
-#include <linux/wait.h>
-
-#include <asm/irq.h>
-#include <asm/ptrace.h>
-#include <asm/irq_regs.h>
-
-struct seq_file;
-struct module;
-struct irq_desc;
-struct irq_data;
-typedef	void (*irq_flow_handler_t)(unsigned int irq,
-					    struct irq_desc *desc);
-typedef	void (*irq_preflow_handler_t)(struct irq_data *data);
-
-/*
- * IRQ line status.
- *
- * Bits 0-7 are the same as the IRQF_* bits in linux/interrupt.h
- *
- * IRQ_TYPE_NONE		- default, unspecified type
- * IRQ_TYPE_EDGE_RISING		- rising edge triggered
- * IRQ_TYPE_EDGE_FALLING	- falling edge triggered
- * IRQ_TYPE_EDGE_BOTH		- rising and falling edge triggered
- * IRQ_TYPE_LEVEL_HIGH		- high level triggered
- * IRQ_TYPE_LEVEL_LOW		- low level triggered
- * IRQ_TYPE_LEVEL_MASK		- Mask to filter out the level bits
- * IRQ_TYPE_SENSE_MASK		- Mask for all the above bits
- * IRQ_TYPE_DEFAULT		- For use by some PICs to ask irq_set_type
- *				  to setup the HW to a sane default (used
- *                                by irqdomain map() callbacks to synchronize
- *                                the HW state and SW flags for a newly
- *                                allocated descriptor).
- *
- * IRQ_TYPE_PROBE		- Special flag for probing in progress
- *
- * Bits which can be modified via irq_set/clear/modify_status_flags()
- * IRQ_LEVEL			- Interrupt is level type. Will be also
- *				  updated in the code when the above trigger
- *				  bits are modified via irq_set_irq_type()
- * IRQ_PER_CPU			- Mark an interrupt PER_CPU. Will protect
- *				  it from affinity setting
- * IRQ_NOPROBE			- Interrupt cannot be probed by autoprobing
- * IRQ_NOREQUEST		- Interrupt cannot be requested via
- *				  request_irq()
- * IRQ_NOTHREAD			- Interrupt cannot be threaded
- * IRQ_NOAUTOEN			- Interrupt is not automatically enabled in
- *				  request/setup_irq()
- * IRQ_NO_BALANCING		- Interrupt cannot be balanced (affinity set)
- * IRQ_MOVE_PCNTXT		- Interrupt can be migrated from process context
- * IRQ_NESTED_TRHEAD		- Interrupt nests into another thread
- * IRQ_PER_CPU_DEVID		- Dev_id is a per-cpu variable
- */
-enum {
-	IRQ_TYPE_NONE		= 0x00000000,
-	IRQ_TYPE_EDGE_RISING	= 0x00000001,
-	IRQ_TYPE_EDGE_FALLING	= 0x00000002,
-	IRQ_TYPE_EDGE_BOTH	= (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING),
-	IRQ_TYPE_LEVEL_HIGH	= 0x00000004,
-	IRQ_TYPE_LEVEL_LOW	= 0x00000008,
-	IRQ_TYPE_LEVEL_MASK	= (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH),
-	IRQ_TYPE_SENSE_MASK	= 0x0000000f,
-	IRQ_TYPE_DEFAULT	= IRQ_TYPE_SENSE_MASK,
-
-	IRQ_TYPE_PROBE		= 0x00000010,
-
-	IRQ_LEVEL		= (1 <<  8),
-	IRQ_PER_CPU		= (1 <<  9),
-	IRQ_NOPROBE		= (1 << 10),
-	IRQ_NOREQUEST		= (1 << 11),
-	IRQ_NOAUTOEN		= (1 << 12),
-	IRQ_NO_BALANCING	= (1 << 13),
-	IRQ_MOVE_PCNTXT		= (1 << 14),
-	IRQ_NESTED_THREAD	= (1 << 15),
-	IRQ_NOTHREAD		= (1 << 16),
-	IRQ_PER_CPU_DEVID	= (1 << 17),
-};
-
-#define IRQF_MODIFY_MASK	\
-	(IRQ_TYPE_SENSE_MASK | IRQ_NOPROBE | IRQ_NOREQUEST | \
-	 IRQ_NOAUTOEN | IRQ_MOVE_PCNTXT | IRQ_LEVEL | IRQ_NO_BALANCING | \
-	 IRQ_PER_CPU | IRQ_NESTED_THREAD | IRQ_NOTHREAD | IRQ_PER_CPU_DEVID)
-
-#define IRQ_NO_BALANCING_MASK	(IRQ_PER_CPU | IRQ_NO_BALANCING)
-
-/*
- * Return value for chip->irq_set_affinity()
- *
- * IRQ_SET_MASK_OK	- OK, core updates irq_data.affinity
- * IRQ_SET_MASK_NOCPY	- OK, chip did update irq_data.affinity
- */
-enum {
-	IRQ_SET_MASK_OK = 0,
-	IRQ_SET_MASK_OK_NOCOPY,
-};
-
-struct msi_desc;
-struct irq_domain;
-
-/**
- * struct irq_data - per irq and irq chip data passed down to chip functions
- * @irq:		interrupt number
- * @hwirq:		hardware interrupt number, local to the interrupt domain
- * @node:		node index useful for balancing
- * @state_use_accessors: status information for irq chip functions.
- *			Use accessor functions to deal with it
- * @chip:		low level interrupt hardware access
- * @domain:		Interrupt translation domain; responsible for mapping
- *			between hwirq number and linux irq number.
- * @handler_data:	per-IRQ data for the irq_chip methods
- * @chip_data:		platform-specific per-chip private data for the chip
- *			methods, to allow shared chip implementations
- * @msi_desc:		MSI descriptor
- * @affinity:		IRQ affinity on SMP
- *
- * The fields here need to overlay the ones in irq_desc until we
- * cleaned up the direct references and switched everything over to
- * irq_data.
- */
-struct irq_data {
-	unsigned int		irq;
-	unsigned long		hwirq;
-	unsigned int		node;
-	unsigned int		state_use_accessors;
-	struct irq_chip		*chip;
-	struct irq_domain	*domain;
-	void			*handler_data;
-	void			*chip_data;
-	struct msi_desc		*msi_desc;
-#ifdef CONFIG_SMP
-	cpumask_var_t		affinity;
-#endif
-};
-
-/*
- * Bit masks for irq_data.state
- *
- * IRQD_TRIGGER_MASK		- Mask for the trigger type bits
- * IRQD_SETAFFINITY_PENDING	- Affinity setting is pending
- * IRQD_NO_BALANCING		- Balancing disabled for this IRQ
- * IRQD_PER_CPU			- Interrupt is per cpu
- * IRQD_AFFINITY_SET		- Interrupt affinity was set
- * IRQD_LEVEL			- Interrupt is level triggered
- * IRQD_WAKEUP_STATE		- Interrupt is configured for wakeup
- *				  from suspend
- * IRDQ_MOVE_PCNTXT		- Interrupt can be moved in process
- *				  context
- * IRQD_IRQ_DISABLED		- Disabled state of the interrupt
- * IRQD_IRQ_MASKED		- Masked state of the interrupt
- * IRQD_IRQ_INPROGRESS		- In progress state of the interrupt
- */
-enum {
-	IRQD_TRIGGER_MASK		= 0xf,
-	IRQD_SETAFFINITY_PENDING	= (1 <<  8),
-	IRQD_NO_BALANCING		= (1 << 10),
-	IRQD_PER_CPU			= (1 << 11),
-	IRQD_AFFINITY_SET		= (1 << 12),
-	IRQD_LEVEL			= (1 << 13),
-	IRQD_WAKEUP_STATE		= (1 << 14),
-	IRQD_MOVE_PCNTXT		= (1 << 15),
-	IRQD_IRQ_DISABLED		= (1 << 16),
-	IRQD_IRQ_MASKED			= (1 << 17),
-	IRQD_IRQ_INPROGRESS		= (1 << 18),
-};
-
-static inline bool irqd_is_setaffinity_pending(struct irq_data *d)
-{
-	return d->state_use_accessors & IRQD_SETAFFINITY_PENDING;
-}
-
-static inline bool irqd_is_per_cpu(struct irq_data *d)
-{
-	return d->state_use_accessors & IRQD_PER_CPU;
-}
-
-static inline bool irqd_can_balance(struct irq_data *d)
-{
-	return !(d->state_use_accessors & (IRQD_PER_CPU | IRQD_NO_BALANCING));
-}
-
-static inline bool irqd_affinity_was_set(struct irq_data *d)
-{
-	return d->state_use_accessors & IRQD_AFFINITY_SET;
-}
-
-static inline void irqd_mark_affinity_was_set(struct irq_data *d)
-{
-	d->state_use_accessors |= IRQD_AFFINITY_SET;
-}
-
-static inline u32 irqd_get_trigger_type(struct irq_data *d)
-{
-	return d->state_use_accessors & IRQD_TRIGGER_MASK;
-}
-
-/*
- * Must only be called inside irq_chip.irq_set_type() functions.
- */
-static inline void irqd_set_trigger_type(struct irq_data *d, u32 type)
-{
-	d->state_use_accessors &= ~IRQD_TRIGGER_MASK;
-	d->state_use_accessors |= type & IRQD_TRIGGER_MASK;
-}
-
-static inline bool irqd_is_level_type(struct irq_data *d)
-{
-	return d->state_use_accessors & IRQD_LEVEL;
-}
-
-static inline bool irqd_is_wakeup_set(struct irq_data *d)
-{
-	return d->state_use_accessors & IRQD_WAKEUP_STATE;
-}
-
-static inline bool irqd_can_move_in_process_context(struct irq_data *d)
-{
-	return d->state_use_accessors & IRQD_MOVE_PCNTXT;
-}
-
-static inline bool irqd_irq_disabled(struct irq_data *d)
-{
-	return d->state_use_accessors & IRQD_IRQ_DISABLED;
-}
-
-static inline bool irqd_irq_masked(struct irq_data *d)
-{
-	return d->state_use_accessors & IRQD_IRQ_MASKED;
-}
-
-static inline bool irqd_irq_inprogress(struct irq_data *d)
-{
-	return d->state_use_accessors & IRQD_IRQ_INPROGRESS;
-}
-
-/*
- * Functions for chained handlers which can be enabled/disabled by the
- * standard disable_irq/enable_irq calls. Must be called with
- * irq_desc->lock held.
- */
-static inline void irqd_set_chained_irq_inprogress(struct irq_data *d)
-{
-	d->state_use_accessors |= IRQD_IRQ_INPROGRESS;
-}
-
-static inline void irqd_clr_chained_irq_inprogress(struct irq_data *d)
-{
-	d->state_use_accessors &= ~IRQD_IRQ_INPROGRESS;
-}
-
-static inline irq_hw_number_t irqd_to_hwirq(struct irq_data *d)
-{
-	return d->hwirq;
-}
-
-/**
- * struct irq_chip - hardware interrupt chip descriptor
- *
- * @name:		name for /proc/interrupts
- * @irq_startup:	start up the interrupt (defaults to ->enable if NULL)
- * @irq_shutdown:	shut down the interrupt (defaults to ->disable if NULL)
- * @irq_enable:		enable the interrupt (defaults to chip->unmask if NULL)
- * @irq_disable:	disable the interrupt
- * @irq_ack:		start of a new interrupt
- * @irq_mask:		mask an interrupt source
- * @irq_mask_ack:	ack and mask an interrupt source
- * @irq_unmask:		unmask an interrupt source
- * @irq_eoi:		end of interrupt
- * @irq_set_affinity:	set the CPU affinity on SMP machines
- * @irq_retrigger:	resend an IRQ to the CPU
- * @irq_set_type:	set the flow type (IRQ_TYPE_LEVEL/etc.) of an IRQ
- * @irq_set_wake:	enable/disable power-management wake-on of an IRQ
- * @irq_bus_lock:	function to lock access to slow bus (i2c) chips
- * @irq_bus_sync_unlock:function to sync and unlock slow bus (i2c) chips
- * @irq_cpu_online:	configure an interrupt source for a secondary CPU
- * @irq_cpu_offline:	un-configure an interrupt source for a secondary CPU
- * @irq_suspend:	function called from core code on suspend once per chip
- * @irq_resume:		function called from core code on resume once per chip
- * @irq_pm_shutdown:	function called from core code on shutdown once per chip
- * @irq_print_chip:	optional to print special chip info in show_interrupts
- * @flags:		chip specific flags
- *
- * @release:		release function solely used by UML
- */
-struct irq_chip {
-	const char	*name;
-	unsigned int	(*irq_startup)(struct irq_data *data);
-	void		(*irq_shutdown)(struct irq_data *data);
-	void		(*irq_enable)(struct irq_data *data);
-	void		(*irq_disable)(struct irq_data *data);
-
-	void		(*irq_ack)(struct irq_data *data);
-	void		(*irq_mask)(struct irq_data *data);
-	void		(*irq_mask_ack)(struct irq_data *data);
-	void		(*irq_unmask)(struct irq_data *data);
-	void		(*irq_eoi)(struct irq_data *data);
-
-	int		(*irq_set_affinity)(struct irq_data *data, const struct cpumask *dest, bool force);
-	int		(*irq_retrigger)(struct irq_data *data);
-	int		(*irq_set_type)(struct irq_data *data, unsigned int flow_type);
-	int		(*irq_set_wake)(struct irq_data *data, unsigned int on);
-
-	void		(*irq_bus_lock)(struct irq_data *data);
-	void		(*irq_bus_sync_unlock)(struct irq_data *data);
-
-	void		(*irq_cpu_online)(struct irq_data *data);
-	void		(*irq_cpu_offline)(struct irq_data *data);
-
-	void		(*irq_suspend)(struct irq_data *data);
-	void		(*irq_resume)(struct irq_data *data);
-	void		(*irq_pm_shutdown)(struct irq_data *data);
-
-	void		(*irq_print_chip)(struct irq_data *data, struct seq_file *p);
-
-	unsigned long	flags;
-
-	/* Currently used only by UML, might disappear one day.*/
-#ifdef CONFIG_IRQ_RELEASE_METHOD
-	void		(*release)(unsigned int irq, void *dev_id);
-#endif
-};
-
-/*
- * irq_chip specific flags
- *
- * IRQCHIP_SET_TYPE_MASKED:	Mask before calling chip.irq_set_type()
- * IRQCHIP_EOI_IF_HANDLED:	Only issue irq_eoi() when irq was handled
- * IRQCHIP_MASK_ON_SUSPEND:	Mask non wake irqs in the suspend path
- * IRQCHIP_ONOFFLINE_ENABLED:	Only call irq_on/off_line callbacks
- *				when irq enabled
- * IRQCHIP_SKIP_SET_WAKE:	Skip chip.irq_set_wake(), for this irq chip
- */
-enum {
-	IRQCHIP_SET_TYPE_MASKED		= (1 <<  0),
-	IRQCHIP_EOI_IF_HANDLED		= (1 <<  1),
-	IRQCHIP_MASK_ON_SUSPEND		= (1 <<  2),
-	IRQCHIP_ONOFFLINE_ENABLED	= (1 <<  3),
-	IRQCHIP_SKIP_SET_WAKE		= (1 <<  4),
-};
-
-/* This include will go away once we isolated irq_desc usage to core code */
-#include <linux/irqdesc.h>
-
-/*
- * Pick up the arch-dependent methods:
- */
-#include <asm/hw_irq.h>
-
-#ifndef NR_IRQS_LEGACY
-# define NR_IRQS_LEGACY 0
-#endif
-
-#ifndef ARCH_IRQ_INIT_FLAGS
-# define ARCH_IRQ_INIT_FLAGS	0
-#endif
-
-#define IRQ_DEFAULT_INIT_FLAGS	ARCH_IRQ_INIT_FLAGS
-
-struct irqaction;
-extern int setup_irq(unsigned int irq, struct irqaction *new);
-extern void remove_irq(unsigned int irq, struct irqaction *act);
-extern int setup_percpu_irq(unsigned int irq, struct irqaction *new);
-extern void remove_percpu_irq(unsigned int irq, struct irqaction *act);
-
-extern void irq_cpu_online(void);
-extern void irq_cpu_offline(void);
-extern int __irq_set_affinity_locked(struct irq_data *data,  const struct cpumask *cpumask);
-
-#ifdef CONFIG_GENERIC_HARDIRQS
-
-#if defined(CONFIG_SMP) && defined(CONFIG_GENERIC_PENDING_IRQ)
-void irq_move_irq(struct irq_data *data);
-void irq_move_masked_irq(struct irq_data *data);
-#else
-static inline void irq_move_irq(struct irq_data *data) { }
-static inline void irq_move_masked_irq(struct irq_data *data) { }
-#endif
-
-extern int no_irq_affinity;
-
-/*
- * Built-in IRQ handlers for various IRQ types,
- * callable via desc->handle_irq()
- */
-extern void handle_level_irq(unsigned int irq, struct irq_desc *desc);
-extern void handle_fasteoi_irq(unsigned int irq, struct irq_desc *desc);
-extern void handle_edge_irq(unsigned int irq, struct irq_desc *desc);
-extern void handle_edge_eoi_irq(unsigned int irq, struct irq_desc *desc);
-extern void handle_simple_irq(unsigned int irq, struct irq_desc *desc);
-extern void handle_percpu_irq(unsigned int irq, struct irq_desc *desc);
-extern void handle_percpu_devid_irq(unsigned int irq, struct irq_desc *desc);
-extern void handle_bad_irq(unsigned int irq, struct irq_desc *desc);
-extern void handle_nested_irq(unsigned int irq);
-
-/* Handling of unhandled and spurious interrupts: */
-extern void note_interrupt(unsigned int irq, struct irq_desc *desc,
-			   irqreturn_t action_ret);
-
-
-/* Enable/disable irq debugging output: */
-extern int noirqdebug_setup(char *str);
-
-/* Checks whether the interrupt can be requested by request_irq(): */
-extern int can_request_irq(unsigned int irq, unsigned long irqflags);
-
-/* Dummy irq-chip implementations: */
-extern struct irq_chip no_irq_chip;
-extern struct irq_chip dummy_irq_chip;
-
-extern void
-irq_set_chip_and_handler_name(unsigned int irq, struct irq_chip *chip,
-			      irq_flow_handler_t handle, const char *name);
-
-static inline void irq_set_chip_and_handler(unsigned int irq, struct irq_chip *chip,
-					    irq_flow_handler_t handle)
-{
-	irq_set_chip_and_handler_name(irq, chip, handle, NULL);
-}
-
-extern int irq_set_percpu_devid(unsigned int irq);
-
-extern void
-__irq_set_handler(unsigned int irq, irq_flow_handler_t handle, int is_chained,
-		  const char *name);
-
-static inline void
-irq_set_handler(unsigned int irq, irq_flow_handler_t handle)
-{
-	__irq_set_handler(irq, handle, 0, NULL);
-}
-
-/*
- * Set a highlevel chained flow handler for a given IRQ.
- * (a chained handler is automatically enabled and set to
- *  IRQ_NOREQUEST, IRQ_NOPROBE, and IRQ_NOTHREAD)
- */
-static inline void
-irq_set_chained_handler(unsigned int irq, irq_flow_handler_t handle)
-{
-	__irq_set_handler(irq, handle, 1, NULL);
-}
-
-void irq_modify_status(unsigned int irq, unsigned long clr, unsigned long set);
-
-static inline void irq_set_status_flags(unsigned int irq, unsigned long set)
-{
-	irq_modify_status(irq, 0, set);
-}
-
-static inline void irq_clear_status_flags(unsigned int irq, unsigned long clr)
-{
-	irq_modify_status(irq, clr, 0);
-}
-
-static inline void irq_set_noprobe(unsigned int irq)
-{
-	irq_modify_status(irq, 0, IRQ_NOPROBE);
-}
-
-static inline void irq_set_probe(unsigned int irq)
-{
-	irq_modify_status(irq, IRQ_NOPROBE, 0);
-}
-
-static inline void irq_set_nothread(unsigned int irq)
-{
-	irq_modify_status(irq, 0, IRQ_NOTHREAD);
-}
-
-static inline void irq_set_thread(unsigned int irq)
-{
-	irq_modify_status(irq, IRQ_NOTHREAD, 0);
-}
-
-static inline void irq_set_nested_thread(unsigned int irq, bool nest)
-{
-	if (nest)
-		irq_set_status_flags(irq, IRQ_NESTED_THREAD);
-	else
-		irq_clear_status_flags(irq, IRQ_NESTED_THREAD);
-}
-
-static inline void irq_set_percpu_devid_flags(unsigned int irq)
-{
-	irq_set_status_flags(irq,
-			     IRQ_NOAUTOEN | IRQ_PER_CPU | IRQ_NOTHREAD |
-			     IRQ_NOPROBE | IRQ_PER_CPU_DEVID);
-}
-
-/* Handle dynamic irq creation and destruction */
-extern unsigned int create_irq_nr(unsigned int irq_want, int node);
-extern int create_irq(void);
-extern void destroy_irq(unsigned int irq);
-
-/*
- * Dynamic irq helper functions. Obsolete. Use irq_alloc_desc* and
- * irq_free_desc instead.
- */
-extern void dynamic_irq_cleanup(unsigned int irq);
-static inline void dynamic_irq_init(unsigned int irq)
-{
-	dynamic_irq_cleanup(irq);
-}
-
-/* Set/get chip/data for an IRQ: */
-extern int irq_set_chip(unsigned int irq, struct irq_chip *chip);
-extern int irq_set_handler_data(unsigned int irq, void *data);
-extern int irq_set_chip_data(unsigned int irq, void *data);
-extern int irq_set_irq_type(unsigned int irq, unsigned int type);
-extern int irq_set_msi_desc(unsigned int irq, struct msi_desc *entry);
-extern struct irq_data *irq_get_irq_data(unsigned int irq);
-
-static inline struct irq_chip *irq_get_chip(unsigned int irq)
-{
-	struct irq_data *d = irq_get_irq_data(irq);
-	return d ? d->chip : NULL;
-}
-
-static inline struct irq_chip *irq_data_get_irq_chip(struct irq_data *d)
-{
-	return d->chip;
-}
-
-static inline void *irq_get_chip_data(unsigned int irq)
-{
-	struct irq_data *d = irq_get_irq_data(irq);
-	return d ? d->chip_data : NULL;
-}
-
-static inline void *irq_data_get_irq_chip_data(struct irq_data *d)
-{
-	return d->chip_data;
-}
-
-static inline void *irq_get_handler_data(unsigned int irq)
-{
-	struct irq_data *d = irq_get_irq_data(irq);
-	return d ? d->handler_data : NULL;
-}
-
-static inline void *irq_data_get_irq_handler_data(struct irq_data *d)
-{
-	return d->handler_data;
-}
-
-static inline struct msi_desc *irq_get_msi_desc(unsigned int irq)
-{
-	struct irq_data *d = irq_get_irq_data(irq);
-	return d ? d->msi_desc : NULL;
-}
-
-static inline struct msi_desc *irq_data_get_msi(struct irq_data *d)
-{
-	return d->msi_desc;
-}
-
-int __irq_alloc_descs(int irq, unsigned int from, unsigned int cnt, int node,
-		struct module *owner);
-
-/* use macros to avoid needing export.h for THIS_MODULE */
-#define irq_alloc_descs(irq, from, cnt, node)	\
-	__irq_alloc_descs(irq, from, cnt, node, THIS_MODULE)
-
-#define irq_alloc_desc(node)			\
-	irq_alloc_descs(-1, 0, 1, node)
-
-#define irq_alloc_desc_at(at, node)		\
-	irq_alloc_descs(at, at, 1, node)
-
-#define irq_alloc_desc_from(from, node)		\
-	irq_alloc_descs(-1, from, 1, node)
-
-void irq_free_descs(unsigned int irq, unsigned int cnt);
-int irq_reserve_irqs(unsigned int from, unsigned int cnt);
-
-static inline void irq_free_desc(unsigned int irq)
-{
-	irq_free_descs(irq, 1);
-}
-
-static inline int irq_reserve_irq(unsigned int irq)
-{
-	return irq_reserve_irqs(irq, 1);
-}
-
-#ifndef irq_reg_writel
-# define irq_reg_writel(val, addr)	writel(val, addr)
-#endif
-#ifndef irq_reg_readl
-# define irq_reg_readl(addr)		readl(addr)
-#endif
-
-/**
- * struct irq_chip_regs - register offsets for struct irq_gci
- * @enable:	Enable register offset to reg_base
- * @disable:	Disable register offset to reg_base
- * @mask:	Mask register offset to reg_base
- * @ack:	Ack register offset to reg_base
- * @eoi:	Eoi register offset to reg_base
- * @type:	Type configuration register offset to reg_base
- * @polarity:	Polarity configuration register offset to reg_base
- */
-struct irq_chip_regs {
-	unsigned long		enable;
-	unsigned long		disable;
-	unsigned long		mask;
-	unsigned long		ack;
-	unsigned long		eoi;
-	unsigned long		type;
-	unsigned long		polarity;
-};
-
-/**
- * struct irq_chip_type - Generic interrupt chip instance for a flow type
- * @chip:		The real interrupt chip which provides the callbacks
- * @regs:		Register offsets for this chip
- * @handler:		Flow handler associated with this chip
- * @type:		Chip can handle these flow types
- *
- * A irq_generic_chip can have several instances of irq_chip_type when
- * it requires different functions and register offsets for different
- * flow types.
- */
-struct irq_chip_type {
-	struct irq_chip		chip;
-	struct irq_chip_regs	regs;
-	irq_flow_handler_t	handler;
-	u32			type;
-};
-
-/**
- * struct irq_chip_generic - Generic irq chip data structure
- * @lock:		Lock to protect register and cache data access
- * @reg_base:		Register base address (virtual)
- * @irq_base:		Interrupt base nr for this chip
- * @irq_cnt:		Number of interrupts handled by this chip
- * @mask_cache:		Cached mask register
- * @type_cache:		Cached type register
- * @polarity_cache:	Cached polarity register
- * @wake_enabled:	Interrupt can wakeup from suspend
- * @wake_active:	Interrupt is marked as an wakeup from suspend source
- * @num_ct:		Number of available irq_chip_type instances (usually 1)
- * @private:		Private data for non generic chip callbacks
- * @list:		List head for keeping track of instances
- * @chip_types:		Array of interrupt irq_chip_types
- *
- * Note, that irq_chip_generic can have multiple irq_chip_type
- * implementations which can be associated to a particular irq line of
- * an irq_chip_generic instance. That allows to share and protect
- * state in an irq_chip_generic instance when we need to implement
- * different flow mechanisms (level/edge) for it.
- */
-struct irq_chip_generic {
-	raw_spinlock_t		lock;
-	void __iomem		*reg_base;
-	unsigned int		irq_base;
-	unsigned int		irq_cnt;
-	u32			mask_cache;
-	u32			type_cache;
-	u32			polarity_cache;
-	u32			wake_enabled;
-	u32			wake_active;
-	unsigned int		num_ct;
-	void			*private;
-	struct list_head	list;
-	struct irq_chip_type	chip_types[0];
-};
-
-/**
- * enum irq_gc_flags - Initialization flags for generic irq chips
- * @IRQ_GC_INIT_MASK_CACHE:	Initialize the mask_cache by reading mask reg
- * @IRQ_GC_INIT_NESTED_LOCK:	Set the lock class of the irqs to nested for
- *				irq chips which need to call irq_set_wake() on
- *				the parent irq. Usually GPIO implementations
- */
-enum irq_gc_flags {
-	IRQ_GC_INIT_MASK_CACHE		= 1 << 0,
-	IRQ_GC_INIT_NESTED_LOCK		= 1 << 1,
-};
-
-/* Generic chip callback functions */
-void irq_gc_noop(struct irq_data *d);
-void irq_gc_mask_disable_reg(struct irq_data *d);
-void irq_gc_mask_set_bit(struct irq_data *d);
-void irq_gc_mask_clr_bit(struct irq_data *d);
-void irq_gc_unmask_enable_reg(struct irq_data *d);
-void irq_gc_ack_set_bit(struct irq_data *d);
-void irq_gc_ack_clr_bit(struct irq_data *d);
-void irq_gc_mask_disable_reg_and_ack(struct irq_data *d);
-void irq_gc_eoi(struct irq_data *d);
-int irq_gc_set_wake(struct irq_data *d, unsigned int on);
-
-/* Setup functions for irq_chip_generic */
-struct irq_chip_generic *
-irq_alloc_generic_chip(const char *name, int nr_ct, unsigned int irq_base,
-		       void __iomem *reg_base, irq_flow_handler_t handler);
-void irq_setup_generic_chip(struct irq_chip_generic *gc, u32 msk,
-			    enum irq_gc_flags flags, unsigned int clr,
-			    unsigned int set);
-int irq_setup_alt_chip(struct irq_data *d, unsigned int type);
-void irq_remove_generic_chip(struct irq_chip_generic *gc, u32 msk,
-			     unsigned int clr, unsigned int set);
-
-static inline struct irq_chip_type *irq_data_get_chip_type(struct irq_data *d)
-{
-	return container_of(d->chip, struct irq_chip_type, chip);
-}
-
-#define IRQ_MSK(n) (u32)((n) < 32 ? ((1 << (n)) - 1) : UINT_MAX)
-
-#ifdef CONFIG_SMP
-static inline void irq_gc_lock(struct irq_chip_generic *gc)
-{
-	raw_spin_lock(&gc->lock);
-}
-
-static inline void irq_gc_unlock(struct irq_chip_generic *gc)
-{
-	raw_spin_unlock(&gc->lock);
-}
-#else
-static inline void irq_gc_lock(struct irq_chip_generic *gc) { }
-static inline void irq_gc_unlock(struct irq_chip_generic *gc) { }
-#endif
-
-#endif /* CONFIG_GENERIC_HARDIRQS */
-
-#endif /* !CONFIG_S390 */
-
-#endif /* _LINUX_IRQ_H */
diff --git a/ANDROID_3.4.5/include/linux/irq_cpustat.h b/ANDROID_3.4.5/include/linux/irq_cpustat.h
deleted file mode 100644
index 77e4bac2..00000000
--- a/ANDROID_3.4.5/include/linux/irq_cpustat.h
+++ /dev/null
@@ -1,31 +0,0 @@
-#ifndef __irq_cpustat_h
-#define __irq_cpustat_h
-
-/*
- * Contains default mappings for irq_cpustat_t, used by almost every
- * architecture.  Some arch (like s390) have per cpu hardware pages and
- * they define their own mappings for irq_stat.
- *
- * Keith Owens <kaos@ocs.com.au> July 2000.
- */
-
-
-/*
- * Simple wrappers reducing source bloat.  Define all irq_stat fields
- * here, even ones that are arch dependent.  That way we get common
- * definitions instead of differing sets for each arch.
- */
-
-#ifndef __ARCH_IRQ_STAT
-extern irq_cpustat_t irq_stat[];		/* defined in asm/hardirq.h */
-#define __IRQ_STAT(cpu, member)	(irq_stat[cpu].member)
-#endif
-
-  /* arch independent irq_stat fields */
-#define local_softirq_pending() \
-	__IRQ_STAT(smp_processor_id(), __softirq_pending)
-
-  /* arch dependent irq_stat fields */
-#define nmi_count(cpu)		__IRQ_STAT((cpu), __nmi_count)	/* i386 */
-
-#endif	/* __irq_cpustat_h */
diff --git a/ANDROID_3.4.5/include/linux/irq_work.h b/ANDROID_3.4.5/include/linux/irq_work.h
deleted file mode 100644
index 6a9e8f53..00000000
--- a/ANDROID_3.4.5/include/linux/irq_work.h
+++ /dev/null
@@ -1,23 +0,0 @@
-#ifndef _LINUX_IRQ_WORK_H
-#define _LINUX_IRQ_WORK_H
-
-#include <linux/llist.h>
-
-struct irq_work {
-	unsigned long flags;
-	struct llist_node llnode;
-	void (*func)(struct irq_work *);
-};
-
-static inline
-void init_irq_work(struct irq_work *work, void (*func)(struct irq_work *))
-{
-	work->flags = 0;
-	work->func = func;
-}
-
-bool irq_work_queue(struct irq_work *work);
-void irq_work_run(void);
-void irq_work_sync(struct irq_work *work);
-
-#endif /* _LINUX_IRQ_WORK_H */
diff --git a/ANDROID_3.4.5/include/linux/irqdesc.h b/ANDROID_3.4.5/include/linux/irqdesc.h
deleted file mode 100644
index f1e25270..00000000
--- a/ANDROID_3.4.5/include/linux/irqdesc.h
+++ /dev/null
@@ -1,178 +0,0 @@
-#ifndef _LINUX_IRQDESC_H
-#define _LINUX_IRQDESC_H
-
-/*
- * Core internal functions to deal with irq descriptors
- *
- * This include will move to kernel/irq once we cleaned up the tree.
- * For now it's included from <linux/irq.h>
- */
-
-struct irq_affinity_notify;
-struct proc_dir_entry;
-struct timer_rand_state;
-struct module;
-/**
- * struct irq_desc - interrupt descriptor
- * @irq_data:		per irq and chip data passed down to chip functions
- * @timer_rand_state:	pointer to timer rand state struct
- * @kstat_irqs:		irq stats per cpu
- * @handle_irq:		highlevel irq-events handler
- * @preflow_handler:	handler called before the flow handler (currently used by sparc)
- * @action:		the irq action chain
- * @status:		status information
- * @core_internal_state__do_not_mess_with_it: core internal status information
- * @depth:		disable-depth, for nested irq_disable() calls
- * @wake_depth:		enable depth, for multiple irq_set_irq_wake() callers
- * @irq_count:		stats field to detect stalled irqs
- * @last_unhandled:	aging timer for unhandled count
- * @irqs_unhandled:	stats field for spurious unhandled interrupts
- * @lock:		locking for SMP
- * @affinity_hint:	hint to user space for preferred irq affinity
- * @affinity_notify:	context for notification of affinity changes
- * @pending_mask:	pending rebalanced interrupts
- * @threads_oneshot:	bitfield to handle shared oneshot threads
- * @threads_active:	number of irqaction threads currently running
- * @wait_for_threads:	wait queue for sync_irq to wait for threaded handlers
- * @dir:		/proc/irq/ procfs entry
- * @name:		flow handler name for /proc/interrupts output
- */
-struct irq_desc {
-	struct irq_data		irq_data;
-	struct timer_rand_state *timer_rand_state;
-	unsigned int __percpu	*kstat_irqs;
-	irq_flow_handler_t	handle_irq;
-#ifdef CONFIG_IRQ_PREFLOW_FASTEOI
-	irq_preflow_handler_t	preflow_handler;
-#endif
-	struct irqaction	*action;	/* IRQ action list */
-	unsigned int		status_use_accessors;
-	unsigned int		core_internal_state__do_not_mess_with_it;
-	unsigned int		depth;		/* nested irq disables */
-	unsigned int		wake_depth;	/* nested wake enables */
-	unsigned int		irq_count;	/* For detecting broken IRQs */
-	unsigned long		last_unhandled;	/* Aging timer for unhandled count */
-	unsigned int		irqs_unhandled;
-	raw_spinlock_t		lock;
-	struct cpumask		*percpu_enabled;
-#ifdef CONFIG_SMP
-	const struct cpumask	*affinity_hint;
-	struct irq_affinity_notify *affinity_notify;
-#ifdef CONFIG_GENERIC_PENDING_IRQ
-	cpumask_var_t		pending_mask;
-#endif
-#endif
-	unsigned long		threads_oneshot;
-	atomic_t		threads_active;
-	wait_queue_head_t       wait_for_threads;
-#ifdef CONFIG_PROC_FS
-	struct proc_dir_entry	*dir;
-#endif
-	struct module		*owner;
-	const char		*name;
-} ____cacheline_internodealigned_in_smp;
-
-#ifndef CONFIG_SPARSE_IRQ
-extern struct irq_desc irq_desc[NR_IRQS];
-#endif
-
-#ifdef CONFIG_GENERIC_HARDIRQS
-
-static inline struct irq_data *irq_desc_get_irq_data(struct irq_desc *desc)
-{
-	return &desc->irq_data;
-}
-
-static inline struct irq_chip *irq_desc_get_chip(struct irq_desc *desc)
-{
-	return desc->irq_data.chip;
-}
-
-static inline void *irq_desc_get_chip_data(struct irq_desc *desc)
-{
-	return desc->irq_data.chip_data;
-}
-
-static inline void *irq_desc_get_handler_data(struct irq_desc *desc)
-{
-	return desc->irq_data.handler_data;
-}
-
-static inline struct msi_desc *irq_desc_get_msi_desc(struct irq_desc *desc)
-{
-	return desc->irq_data.msi_desc;
-}
-
-/*
- * Architectures call this to let the generic IRQ layer
- * handle an interrupt. If the descriptor is attached to an
- * irqchip-style controller then we call the ->handle_irq() handler,
- * and it calls __do_IRQ() if it's attached to an irqtype-style controller.
- */
-static inline void generic_handle_irq_desc(unsigned int irq, struct irq_desc *desc)
-{
-	desc->handle_irq(irq, desc);
-}
-
-int generic_handle_irq(unsigned int irq);
-
-/* Test to see if a driver has successfully requested an irq */
-static inline int irq_has_action(unsigned int irq)
-{
-	struct irq_desc *desc = irq_to_desc(irq);
-	return desc->action != NULL;
-}
-
-/* caller has locked the irq_desc and both params are valid */
-static inline void __irq_set_handler_locked(unsigned int irq,
-					    irq_flow_handler_t handler)
-{
-	struct irq_desc *desc;
-
-	desc = irq_to_desc(irq);
-	desc->handle_irq = handler;
-}
-
-/* caller has locked the irq_desc and both params are valid */
-static inline void
-__irq_set_chip_handler_name_locked(unsigned int irq, struct irq_chip *chip,
-				   irq_flow_handler_t handler, const char *name)
-{
-	struct irq_desc *desc;
-
-	desc = irq_to_desc(irq);
-	irq_desc_get_irq_data(desc)->chip = chip;
-	desc->handle_irq = handler;
-	desc->name = name;
-}
-
-static inline int irq_balancing_disabled(unsigned int irq)
-{
-	struct irq_desc *desc;
-
-	desc = irq_to_desc(irq);
-	return desc->status_use_accessors & IRQ_NO_BALANCING_MASK;
-}
-
-static inline void
-irq_set_lockdep_class(unsigned int irq, struct lock_class_key *class)
-{
-	struct irq_desc *desc = irq_to_desc(irq);
-
-	if (desc)
-		lockdep_set_class(&desc->lock, class);
-}
-
-#ifdef CONFIG_IRQ_PREFLOW_FASTEOI
-static inline void
-__irq_set_preflow_handler(unsigned int irq, irq_preflow_handler_t handler)
-{
-	struct irq_desc *desc;
-
-	desc = irq_to_desc(irq);
-	desc->preflow_handler = handler;
-}
-#endif
-#endif
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/irqdomain.h b/ANDROID_3.4.5/include/linux/irqdomain.h
deleted file mode 100644
index c65740d7..00000000
--- a/ANDROID_3.4.5/include/linux/irqdomain.h
+++ /dev/null
@@ -1,186 +0,0 @@
-/*
- * irq_domain - IRQ translation domains
- *
- * Translation infrastructure between hw and linux irq numbers.  This is
- * helpful for interrupt controllers to implement mapping between hardware
- * irq numbers and the Linux irq number space.
- *
- * irq_domains also have a hook for translating device tree interrupt
- * representation into a hardware irq number that can be mapped back to a
- * Linux irq number without any extra platform support code.
- *
- * Interrupt controller "domain" data structure. This could be defined as a
- * irq domain controller. That is, it handles the mapping between hardware
- * and virtual interrupt numbers for a given interrupt domain. The domain
- * structure is generally created by the PIC code for a given PIC instance
- * (though a domain can cover more than one PIC if they have a flat number
- * model). It's the domain callbacks that are responsible for setting the
- * irq_chip on a given irq_desc after it's been mapped.
- *
- * The host code and data structures are agnostic to whether or not
- * we use an open firmware device-tree. We do have references to struct
- * device_node in two places: in irq_find_host() to find the host matching
- * a given interrupt controller node, and of course as an argument to its
- * counterpart domain->ops->match() callback. However, those are treated as
- * generic pointers by the core and the fact that it's actually a device-node
- * pointer is purely a convention between callers and implementation. This
- * code could thus be used on other architectures by replacing those two
- * by some sort of arch-specific void * "token" used to identify interrupt
- * controllers.
- */
-
-#ifndef _LINUX_IRQDOMAIN_H
-#define _LINUX_IRQDOMAIN_H
-
-#include <linux/types.h>
-#include <linux/radix-tree.h>
-
-struct device_node;
-struct irq_domain;
-struct of_device_id;
-
-/* Number of irqs reserved for a legacy isa controller */
-#define NUM_ISA_INTERRUPTS	16
-
-/**
- * struct irq_domain_ops - Methods for irq_domain objects
- * @match: Match an interrupt controller device node to a host, returns
- *         1 on a match
- * @map: Create or update a mapping between a virtual irq number and a hw
- *       irq number. This is called only once for a given mapping.
- * @unmap: Dispose of such a mapping
- * @xlate: Given a device tree node and interrupt specifier, decode
- *         the hardware irq number and linux irq type value.
- *
- * Functions below are provided by the driver and called whenever a new mapping
- * is created or an old mapping is disposed. The driver can then proceed to
- * whatever internal data structures management is required. It also needs
- * to setup the irq_desc when returning from map().
- */
-struct irq_domain_ops {
-	int (*match)(struct irq_domain *d, struct device_node *node);
-	int (*map)(struct irq_domain *d, unsigned int virq, irq_hw_number_t hw);
-	void (*unmap)(struct irq_domain *d, unsigned int virq);
-	int (*xlate)(struct irq_domain *d, struct device_node *node,
-		     const u32 *intspec, unsigned int intsize,
-		     unsigned long *out_hwirq, unsigned int *out_type);
-};
-
-/**
- * struct irq_domain - Hardware interrupt number translation object
- * @link: Element in global irq_domain list.
- * @revmap_type: Method used for reverse mapping hwirq numbers to linux irq. This
- *               will be one of the IRQ_DOMAIN_MAP_* values.
- * @revmap_data: Revmap method specific data.
- * @ops: pointer to irq_domain methods
- * @host_data: private data pointer for use by owner.  Not touched by irq_domain
- *             core code.
- * @irq_base: Start of irq_desc range assigned to the irq_domain.  The creator
- *            of the irq_domain is responsible for allocating the array of
- *            irq_desc structures.
- * @nr_irq: Number of irqs managed by the irq domain
- * @hwirq_base: Starting number for hwirqs managed by the irq domain
- * @of_node: (optional) Pointer to device tree nodes associated with the
- *           irq_domain.  Used when decoding device tree interrupt specifiers.
- */
-struct irq_domain {
-	struct list_head link;
-
-	/* type of reverse mapping_technique */
-	unsigned int revmap_type;
-	union {
-		struct {
-			unsigned int size;
-			unsigned int first_irq;
-			irq_hw_number_t first_hwirq;
-		} legacy;
-		struct {
-			unsigned int size;
-			unsigned int *revmap;
-		} linear;
-		struct {
-			unsigned int max_irq;
-		} nomap;
-		struct radix_tree_root tree;
-	} revmap_data;
-	const struct irq_domain_ops *ops;
-	void *host_data;
-	irq_hw_number_t inval_irq;
-
-	/* Optional device node pointer */
-	struct device_node *of_node;
-};
-
-#ifdef CONFIG_IRQ_DOMAIN
-struct irq_domain *irq_domain_add_legacy(struct device_node *of_node,
-					 unsigned int size,
-					 unsigned int first_irq,
-					 irq_hw_number_t first_hwirq,
-					 const struct irq_domain_ops *ops,
-					 void *host_data);
-struct irq_domain *irq_domain_add_linear(struct device_node *of_node,
-					 unsigned int size,
-					 const struct irq_domain_ops *ops,
-					 void *host_data);
-struct irq_domain *irq_domain_add_nomap(struct device_node *of_node,
-					 unsigned int max_irq,
-					 const struct irq_domain_ops *ops,
-					 void *host_data);
-struct irq_domain *irq_domain_add_tree(struct device_node *of_node,
-					 const struct irq_domain_ops *ops,
-					 void *host_data);
-
-extern struct irq_domain *irq_find_host(struct device_node *node);
-extern void irq_set_default_host(struct irq_domain *host);
-
-static inline struct irq_domain *irq_domain_add_legacy_isa(
-				struct device_node *of_node,
-				const struct irq_domain_ops *ops,
-				void *host_data)
-{
-	return irq_domain_add_legacy(of_node, NUM_ISA_INTERRUPTS, 0, 0, ops,
-				     host_data);
-}
-extern struct irq_domain *irq_find_host(struct device_node *node);
-extern void irq_set_default_host(struct irq_domain *host);
-
-
-extern unsigned int irq_create_mapping(struct irq_domain *host,
-				       irq_hw_number_t hwirq);
-extern void irq_dispose_mapping(unsigned int virq);
-extern unsigned int irq_find_mapping(struct irq_domain *host,
-				     irq_hw_number_t hwirq);
-extern unsigned int irq_create_direct_mapping(struct irq_domain *host);
-extern void irq_radix_revmap_insert(struct irq_domain *host, unsigned int virq,
-				    irq_hw_number_t hwirq);
-extern unsigned int irq_radix_revmap_lookup(struct irq_domain *host,
-					    irq_hw_number_t hwirq);
-extern unsigned int irq_linear_revmap(struct irq_domain *host,
-				      irq_hw_number_t hwirq);
-
-extern const struct irq_domain_ops irq_domain_simple_ops;
-
-/* stock xlate functions */
-int irq_domain_xlate_onecell(struct irq_domain *d, struct device_node *ctrlr,
-			const u32 *intspec, unsigned int intsize,
-			irq_hw_number_t *out_hwirq, unsigned int *out_type);
-int irq_domain_xlate_twocell(struct irq_domain *d, struct device_node *ctrlr,
-			const u32 *intspec, unsigned int intsize,
-			irq_hw_number_t *out_hwirq, unsigned int *out_type);
-int irq_domain_xlate_onetwocell(struct irq_domain *d, struct device_node *ctrlr,
-			const u32 *intspec, unsigned int intsize,
-			irq_hw_number_t *out_hwirq, unsigned int *out_type);
-
-#if defined(CONFIG_OF_IRQ)
-extern void irq_domain_generate_simple(const struct of_device_id *match,
-					u64 phys_base, unsigned int irq_start);
-#else /* CONFIG_OF_IRQ */
-static inline void irq_domain_generate_simple(const struct of_device_id *match,
-					u64 phys_base, unsigned int irq_start) { }
-#endif /* !CONFIG_OF_IRQ */
-
-#else /* CONFIG_IRQ_DOMAIN */
-static inline void irq_dispose_mapping(unsigned int virq) { }
-#endif /* !CONFIG_IRQ_DOMAIN */
-
-#endif /* _LINUX_IRQDOMAIN_H */
diff --git a/ANDROID_3.4.5/include/linux/irqflags.h b/ANDROID_3.4.5/include/linux/irqflags.h
deleted file mode 100644
index d176d658..00000000
--- a/ANDROID_3.4.5/include/linux/irqflags.h
+++ /dev/null
@@ -1,150 +0,0 @@
-/*
- * include/linux/irqflags.h
- *
- * IRQ flags tracing: follow the state of the hardirq and softirq flags and
- * provide callbacks for transitions between ON and OFF states.
- *
- * This file gets included from lowlevel asm headers too, to provide
- * wrapped versions of the local_irq_*() APIs, based on the
- * raw_local_irq_*() macros from the lowlevel headers.
- */
-#ifndef _LINUX_TRACE_IRQFLAGS_H
-#define _LINUX_TRACE_IRQFLAGS_H
-
-#include <linux/typecheck.h>
-#include <asm/irqflags.h>
-
-#ifdef CONFIG_TRACE_IRQFLAGS
-  extern void trace_softirqs_on(unsigned long ip);
-  extern void trace_softirqs_off(unsigned long ip);
-  extern void trace_hardirqs_on(void);
-  extern void trace_hardirqs_off(void);
-# define trace_hardirq_context(p)	((p)->hardirq_context)
-# define trace_softirq_context(p)	((p)->softirq_context)
-# define trace_hardirqs_enabled(p)	((p)->hardirqs_enabled)
-# define trace_softirqs_enabled(p)	((p)->softirqs_enabled)
-# define trace_hardirq_enter()	do { current->hardirq_context++; } while (0)
-# define trace_hardirq_exit()	do { current->hardirq_context--; } while (0)
-# define lockdep_softirq_enter()	do { current->softirq_context++; } while (0)
-# define lockdep_softirq_exit()	do { current->softirq_context--; } while (0)
-# define INIT_TRACE_IRQFLAGS	.softirqs_enabled = 1,
-#else
-# define trace_hardirqs_on()		do { } while (0)
-# define trace_hardirqs_off()		do { } while (0)
-# define trace_softirqs_on(ip)		do { } while (0)
-# define trace_softirqs_off(ip)		do { } while (0)
-# define trace_hardirq_context(p)	0
-# define trace_softirq_context(p)	0
-# define trace_hardirqs_enabled(p)	0
-# define trace_softirqs_enabled(p)	0
-# define trace_hardirq_enter()		do { } while (0)
-# define trace_hardirq_exit()		do { } while (0)
-# define lockdep_softirq_enter()	do { } while (0)
-# define lockdep_softirq_exit()		do { } while (0)
-# define INIT_TRACE_IRQFLAGS
-#endif
-
-#if defined(CONFIG_IRQSOFF_TRACER) || \
-	defined(CONFIG_PREEMPT_TRACER)
- extern void stop_critical_timings(void);
- extern void start_critical_timings(void);
-#else
-# define stop_critical_timings() do { } while (0)
-# define start_critical_timings() do { } while (0)
-#endif
-
-/*
- * Wrap the arch provided IRQ routines to provide appropriate checks.
- */
-#define raw_local_irq_disable()		arch_local_irq_disable()
-#define raw_local_irq_enable()		arch_local_irq_enable()
-#define raw_local_irq_save(flags)			\
-	do {						\
-		typecheck(unsigned long, flags);	\
-		flags = arch_local_irq_save();		\
-	} while (0)
-#define raw_local_irq_restore(flags)			\
-	do {						\
-		typecheck(unsigned long, flags);	\
-		arch_local_irq_restore(flags);		\
-	} while (0)
-#define raw_local_save_flags(flags)			\
-	do {						\
-		typecheck(unsigned long, flags);	\
-		flags = arch_local_save_flags();	\
-	} while (0)
-#define raw_irqs_disabled_flags(flags)			\
-	({						\
-		typecheck(unsigned long, flags);	\
-		arch_irqs_disabled_flags(flags);	\
-	})
-#define raw_irqs_disabled()		(arch_irqs_disabled())
-#define raw_safe_halt()			arch_safe_halt()
-
-/*
- * The local_irq_*() APIs are equal to the raw_local_irq*()
- * if !TRACE_IRQFLAGS.
- */
-#ifdef CONFIG_TRACE_IRQFLAGS_SUPPORT
-#define local_irq_enable() \
-	do { trace_hardirqs_on(); raw_local_irq_enable(); } while (0)
-#define local_irq_disable() \
-	do { raw_local_irq_disable(); trace_hardirqs_off(); } while (0)
-#define local_irq_save(flags)				\
-	do {						\
-		raw_local_irq_save(flags);		\
-		trace_hardirqs_off();			\
-	} while (0)
-
-
-#define local_irq_restore(flags)			\
-	do {						\
-		if (raw_irqs_disabled_flags(flags)) {	\
-			raw_local_irq_restore(flags);	\
-			trace_hardirqs_off();		\
-		} else {				\
-			trace_hardirqs_on();		\
-			raw_local_irq_restore(flags);	\
-		}					\
-	} while (0)
-#define local_save_flags(flags)				\
-	do {						\
-		raw_local_save_flags(flags);		\
-	} while (0)
-
-#define irqs_disabled_flags(flags)			\
-	({						\
-		raw_irqs_disabled_flags(flags);		\
-	})
-
-#define irqs_disabled()					\
-	({						\
-		unsigned long _flags;			\
-		raw_local_save_flags(_flags);		\
-		raw_irqs_disabled_flags(_flags);	\
-	})
-
-#define safe_halt()				\
-	do {					\
-		trace_hardirqs_on();		\
-		raw_safe_halt();		\
-	} while (0)
-
-
-#else /* !CONFIG_TRACE_IRQFLAGS_SUPPORT */
-
-#define local_irq_enable()	do { raw_local_irq_enable(); } while (0)
-#define local_irq_disable()	do { raw_local_irq_disable(); } while (0)
-#define local_irq_save(flags)					\
-	do {							\
-		raw_local_irq_save(flags);			\
-	} while (0)
-#define local_irq_restore(flags) do { raw_local_irq_restore(flags); } while (0)
-#define local_save_flags(flags)	do { raw_local_save_flags(flags); } while (0)
-#define irqs_disabled()		(raw_irqs_disabled())
-#define irqs_disabled_flags(flags) (raw_irqs_disabled_flags(flags))
-#define safe_halt()		do { raw_safe_halt(); } while (0)
-
-#endif /* CONFIG_TRACE_IRQFLAGS_SUPPORT */
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/irqnr.h b/ANDROID_3.4.5/include/linux/irqnr.h
deleted file mode 100644
index 3bc4dcab..00000000
--- a/ANDROID_3.4.5/include/linux/irqnr.h
+++ /dev/null
@@ -1,62 +0,0 @@
-#ifndef _LINUX_IRQNR_H
-#define _LINUX_IRQNR_H
-
-/*
- * Generic irq_desc iterators:
- */
-#ifdef __KERNEL__
-
-#ifndef CONFIG_GENERIC_HARDIRQS
-#include <asm/irq.h>
-
-/*
- * Wrappers for non-genirq architectures:
- */
-#define nr_irqs			NR_IRQS
-#define irq_to_desc(irq)	(&irq_desc[irq])
-
-# define for_each_irq_desc(irq, desc)		\
-	for (irq = 0; irq < nr_irqs; irq++)
-
-# define for_each_irq_desc_reverse(irq, desc)                          \
-	for (irq = nr_irqs - 1; irq >= 0; irq--)
-
-#else /* CONFIG_GENERIC_HARDIRQS */
-
-extern int nr_irqs;
-extern struct irq_desc *irq_to_desc(unsigned int irq);
-unsigned int irq_get_next_irq(unsigned int offset);
-
-# define for_each_irq_desc(irq, desc)					\
-	for (irq = 0, desc = irq_to_desc(irq); irq < nr_irqs;		\
-	     irq++, desc = irq_to_desc(irq))				\
-		if (!desc)						\
-			;						\
-		else
-
-
-# define for_each_irq_desc_reverse(irq, desc)				\
-	for (irq = nr_irqs - 1, desc = irq_to_desc(irq); irq >= 0;	\
-	     irq--, desc = irq_to_desc(irq))				\
-		if (!desc)						\
-			;						\
-		else
-
-#ifdef CONFIG_SMP
-#define irq_node(irq)	(irq_get_irq_data(irq)->node)
-#else
-#define irq_node(irq)	0
-#endif
-
-# define for_each_active_irq(irq)			\
-	for (irq = irq_get_next_irq(0); irq < nr_irqs;	\
-	     irq = irq_get_next_irq(irq + 1))
-
-#endif /* CONFIG_GENERIC_HARDIRQS */
-
-#define for_each_irq_nr(irq)                   \
-       for (irq = 0; irq < nr_irqs; irq++)
-
-#endif /* __KERNEL__ */
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/irqreturn.h b/ANDROID_3.4.5/include/linux/irqreturn.h
deleted file mode 100644
index 714ba08d..00000000
--- a/ANDROID_3.4.5/include/linux/irqreturn.h
+++ /dev/null
@@ -1,19 +0,0 @@
-#ifndef _LINUX_IRQRETURN_H
-#define _LINUX_IRQRETURN_H
-
-/**
- * enum irqreturn
- * @IRQ_NONE		interrupt was not from this device
- * @IRQ_HANDLED		interrupt was handled by this device
- * @IRQ_WAKE_THREAD	handler requests to wake the handler thread
- */
-enum irqreturn {
-	IRQ_NONE		= (0 << 0),
-	IRQ_HANDLED		= (1 << 0),
-	IRQ_WAKE_THREAD		= (1 << 1),
-};
-
-typedef enum irqreturn irqreturn_t;
-#define IRQ_RETVAL(x)	((x) != IRQ_NONE)
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/isa.h b/ANDROID_3.4.5/include/linux/isa.h
deleted file mode 100644
index b0270e38..00000000
--- a/ANDROID_3.4.5/include/linux/isa.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * ISA bus.
- */
-
-#ifndef __LINUX_ISA_H
-#define __LINUX_ISA_H
-
-#include <linux/device.h>
-#include <linux/kernel.h>
-
-struct isa_driver {
-	int (*match)(struct device *, unsigned int);
-	int (*probe)(struct device *, unsigned int);
-	int (*remove)(struct device *, unsigned int);
-	void (*shutdown)(struct device *, unsigned int);
-	int (*suspend)(struct device *, unsigned int, pm_message_t);
-	int (*resume)(struct device *, unsigned int);
-
-	struct device_driver driver;
-	struct device *devices;
-};
-
-#define to_isa_driver(x) container_of((x), struct isa_driver, driver)
-
-#ifdef CONFIG_ISA
-int isa_register_driver(struct isa_driver *, unsigned int);
-void isa_unregister_driver(struct isa_driver *);
-#else
-static inline int isa_register_driver(struct isa_driver *d, unsigned int i)
-{
-	return 0;
-}
-
-static inline void isa_unregister_driver(struct isa_driver *d)
-{
-}
-#endif
-
-#endif /* __LINUX_ISA_H */
diff --git a/ANDROID_3.4.5/include/linux/isapnp.h b/ANDROID_3.4.5/include/linux/isapnp.h
deleted file mode 100644
index e2d28b02..00000000
--- a/ANDROID_3.4.5/include/linux/isapnp.h
+++ /dev/null
@@ -1,125 +0,0 @@
-/*
- *  ISA Plug & Play support
- *  Copyright (c) by Jaroslav Kysela <perex@suse.cz>
- *
- *
- *   This program is free software; you can redistribute it and/or modify
- *   it under the terms of the GNU General Public License as published by
- *   the Free Software Foundation; either version 2 of the License, or
- *   (at your option) any later version.
- *
- *   This program is distributed in the hope that it will be useful,
- *   but WITHOUT ANY WARRANTY; without even the implied warranty of
- *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *   GNU General Public License for more details.
- *
- *   You should have received a copy of the GNU General Public License
- *   along with this program; if not, write to the Free Software
- *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-#ifndef LINUX_ISAPNP_H
-#define LINUX_ISAPNP_H
-
-#include <linux/errno.h>
-#include <linux/pnp.h>
-
-/*
- *
- */
-
-#define ISAPNP_VENDOR(a,b,c)	(((((a)-'A'+1)&0x3f)<<2)|\
-				((((b)-'A'+1)&0x18)>>3)|((((b)-'A'+1)&7)<<13)|\
-				((((c)-'A'+1)&0x1f)<<8))
-#define ISAPNP_DEVICE(x)	((((x)&0xf000)>>8)|\
-				 (((x)&0x0f00)>>8)|\
-				 (((x)&0x00f0)<<8)|\
-				 (((x)&0x000f)<<8))
-#define ISAPNP_FUNCTION(x)	ISAPNP_DEVICE(x)
-
-/*
- *
- */
-
-#ifdef __KERNEL__
-#include <linux/mod_devicetable.h>
-
-#define DEVICE_COUNT_COMPATIBLE 4
-
-#define ISAPNP_CARD_DEVS	8
-
-#define ISAPNP_CARD_ID(_va, _vb, _vc, _device) \
-		.card_vendor = ISAPNP_VENDOR(_va, _vb, _vc), .card_device = ISAPNP_DEVICE(_device)
-#define ISAPNP_CARD_END \
-		.card_vendor = 0, .card_device = 0
-#define ISAPNP_DEVICE_ID(_va, _vb, _vc, _function) \
-		{ .vendor = ISAPNP_VENDOR(_va, _vb, _vc), .function = ISAPNP_FUNCTION(_function) }
-
-/* export used IDs outside module */
-#define ISAPNP_CARD_TABLE(name) \
-		MODULE_GENERIC_TABLE(isapnp_card, name)
-
-struct isapnp_card_id {
-	unsigned long driver_data;	/* data private to the driver */
-	unsigned short card_vendor, card_device;
-	struct {
-		unsigned short vendor, function;
-	} devs[ISAPNP_CARD_DEVS];	/* logical devices */
-};
-
-#define ISAPNP_DEVICE_SINGLE(_cva, _cvb, _cvc, _cdevice, _dva, _dvb, _dvc, _dfunction) \
-		.card_vendor = ISAPNP_VENDOR(_cva, _cvb, _cvc), .card_device =  ISAPNP_DEVICE(_cdevice), \
-		.vendor = ISAPNP_VENDOR(_dva, _dvb, _dvc), .function = ISAPNP_FUNCTION(_dfunction)
-#define ISAPNP_DEVICE_SINGLE_END \
-		.card_vendor = 0, .card_device = 0
-
-#if defined(CONFIG_ISAPNP) || (defined(CONFIG_ISAPNP_MODULE) && defined(MODULE))
-
-#define __ISAPNP__
-
-/* lowlevel configuration */
-int isapnp_present(void);
-int isapnp_cfg_begin(int csn, int device);
-int isapnp_cfg_end(void);
-unsigned char isapnp_read_byte(unsigned char idx);
-void isapnp_write_byte(unsigned char idx, unsigned char val);
-
-#ifdef CONFIG_PROC_FS
-int isapnp_proc_init(void);
-int isapnp_proc_done(void);
-#else
-static inline int isapnp_proc_init(void) { return 0; }
-static inline int isapnp_proc_done(void) { return 0; }
-#endif
-
-/* compat */
-struct pnp_card *pnp_find_card(unsigned short vendor,
-			       unsigned short device,
-			       struct pnp_card *from);
-struct pnp_dev *pnp_find_dev(struct pnp_card *card,
-			     unsigned short vendor,
-			     unsigned short function,
-			     struct pnp_dev *from);
-
-#else /* !CONFIG_ISAPNP */
-
-/* lowlevel configuration */
-static inline int isapnp_present(void) { return 0; }
-static inline int isapnp_cfg_begin(int csn, int device) { return -ENODEV; }
-static inline int isapnp_cfg_end(void) { return -ENODEV; }
-static inline unsigned char isapnp_read_byte(unsigned char idx) { return 0xff; }
-static inline void isapnp_write_byte(unsigned char idx, unsigned char val) { ; }
-
-static inline struct pnp_card *pnp_find_card(unsigned short vendor,
-					     unsigned short device,
-					     struct pnp_card *from) { return NULL; }
-static inline struct pnp_dev *pnp_find_dev(struct pnp_card *card,
-					   unsigned short vendor,
-					   unsigned short function,
-					   struct pnp_dev *from) { return NULL; }
-
-#endif /* CONFIG_ISAPNP */
-
-#endif /* __KERNEL__ */
-#endif /* LINUX_ISAPNP_H */
diff --git a/ANDROID_3.4.5/include/linux/iscsi_boot_sysfs.h b/ANDROID_3.4.5/include/linux/iscsi_boot_sysfs.h
deleted file mode 100644
index 2a8b1659..00000000
--- a/ANDROID_3.4.5/include/linux/iscsi_boot_sysfs.h
+++ /dev/null
@@ -1,133 +0,0 @@
-/*
- * Export the iSCSI boot info to userland via sysfs.
- *
- * Copyright (C) 2010 Red Hat, Inc.  All rights reserved.
- * Copyright (C) 2010 Mike Christie
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License v2.0 as published by
- * the Free Software Foundation
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-#ifndef _ISCSI_BOOT_SYSFS_
-#define _ISCSI_BOOT_SYSFS_
-
-/*
- * The text attributes names for each of the kobjects.
-*/
-enum iscsi_boot_eth_properties_enum {
-	ISCSI_BOOT_ETH_INDEX,
-	ISCSI_BOOT_ETH_FLAGS,
-	ISCSI_BOOT_ETH_IP_ADDR,
-	ISCSI_BOOT_ETH_SUBNET_MASK,
-	ISCSI_BOOT_ETH_ORIGIN,
-	ISCSI_BOOT_ETH_GATEWAY,
-	ISCSI_BOOT_ETH_PRIMARY_DNS,
-	ISCSI_BOOT_ETH_SECONDARY_DNS,
-	ISCSI_BOOT_ETH_DHCP,
-	ISCSI_BOOT_ETH_VLAN,
-	ISCSI_BOOT_ETH_MAC,
-	/* eth_pci_bdf - this is replaced by link to the device itself. */
-	ISCSI_BOOT_ETH_HOSTNAME,
-	ISCSI_BOOT_ETH_END_MARKER,
-};
-
-enum iscsi_boot_tgt_properties_enum {
-	ISCSI_BOOT_TGT_INDEX,
-	ISCSI_BOOT_TGT_FLAGS,
-	ISCSI_BOOT_TGT_IP_ADDR,
-	ISCSI_BOOT_TGT_PORT,
-	ISCSI_BOOT_TGT_LUN,
-	ISCSI_BOOT_TGT_CHAP_TYPE,
-	ISCSI_BOOT_TGT_NIC_ASSOC,
-	ISCSI_BOOT_TGT_NAME,
-	ISCSI_BOOT_TGT_CHAP_NAME,
-	ISCSI_BOOT_TGT_CHAP_SECRET,
-	ISCSI_BOOT_TGT_REV_CHAP_NAME,
-	ISCSI_BOOT_TGT_REV_CHAP_SECRET,
-	ISCSI_BOOT_TGT_END_MARKER,
-};
-
-enum iscsi_boot_initiator_properties_enum {
-	ISCSI_BOOT_INI_INDEX,
-	ISCSI_BOOT_INI_FLAGS,
-	ISCSI_BOOT_INI_ISNS_SERVER,
-	ISCSI_BOOT_INI_SLP_SERVER,
-	ISCSI_BOOT_INI_PRI_RADIUS_SERVER,
-	ISCSI_BOOT_INI_SEC_RADIUS_SERVER,
-	ISCSI_BOOT_INI_INITIATOR_NAME,
-	ISCSI_BOOT_INI_END_MARKER,
-};
-
-struct attribute_group;
-
-struct iscsi_boot_kobj {
-	struct kobject kobj;
-	struct attribute_group *attr_group;
-	struct list_head list;
-
-	/*
-	 * Pointer to store driver specific info. If set this will
-	 * be freed for the LLD when the kobj release function is called.
-	 */
-	void *data;
-	/*
-	 * Driver specific show function.
-	 *
-	 * The enum of the type. This can be any value of the above
-	 * properties.
-	 */
-	ssize_t (*show) (void *data, int type, char *buf);
-
-	/*
-	 * Drivers specific visibility function.
-	 * The function should return if they the attr should be readable
-	 * writable or should not be shown.
-	 *
-	 * The enum of the type. This can be any value of the above
-	 * properties.
-	 */
-	umode_t (*is_visible) (void *data, int type);
-
-	/*
-	 * Driver specific release function.
-	 *
-	 * The function should free the data passed in.
-	 */
-	void (*release) (void *data);
-};
-
-struct iscsi_boot_kset {
-	struct list_head kobj_list;
-	struct kset *kset;
-};
-
-struct iscsi_boot_kobj *
-iscsi_boot_create_initiator(struct iscsi_boot_kset *boot_kset, int index,
-			    void *data,
-			    ssize_t (*show) (void *data, int type, char *buf),
-			    umode_t (*is_visible) (void *data, int type),
-			    void (*release) (void *data));
-
-struct iscsi_boot_kobj *
-iscsi_boot_create_ethernet(struct iscsi_boot_kset *boot_kset, int index,
-			   void *data,
-			   ssize_t (*show) (void *data, int type, char *buf),
-			   umode_t (*is_visible) (void *data, int type),
-			   void (*release) (void *data));
-struct iscsi_boot_kobj *
-iscsi_boot_create_target(struct iscsi_boot_kset *boot_kset, int index,
-			 void *data,
-			 ssize_t (*show) (void *data, int type, char *buf),
-			 umode_t (*is_visible) (void *data, int type),
-			 void (*release) (void *data));
-
-struct iscsi_boot_kset *iscsi_boot_create_kset(const char *set_name);
-struct iscsi_boot_kset *iscsi_boot_create_host_kset(unsigned int hostno);
-void iscsi_boot_destroy_kset(struct iscsi_boot_kset *boot_kset);
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/iscsi_ibft.h b/ANDROID_3.4.5/include/linux/iscsi_ibft.h
deleted file mode 100644
index 8ba7e5b9..00000000
--- a/ANDROID_3.4.5/include/linux/iscsi_ibft.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- *  Copyright 2007 Red Hat, Inc.
- *  by Peter Jones <pjones@redhat.com>
- *  Copyright 2007 IBM, Inc.
- *  by Konrad Rzeszutek <konradr@linux.vnet.ibm.com>
- *  Copyright 2008
- *  by Konrad Rzeszutek <ketuzsezr@darnok.org>
- *
- * This code exposes the iSCSI Boot Format Table to userland via sysfs.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License v2.0 as published by
- * the Free Software Foundation
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#ifndef ISCSI_IBFT_H
-#define ISCSI_IBFT_H
-
-#include <acpi/acpi.h>
-
-/*
- * Logical location of iSCSI Boot Format Table.
- * If the value is NULL there is no iBFT on the machine.
- */
-extern struct acpi_table_ibft *ibft_addr;
-
-/*
- * Routine used to find and reserve the iSCSI Boot Format Table. The
- * mapped address is set in the ibft_addr variable.
- */
-#ifdef CONFIG_ISCSI_IBFT_FIND
-unsigned long find_ibft_region(unsigned long *sizep);
-#else
-static inline unsigned long find_ibft_region(unsigned long *sizep)
-{
-	*sizep = 0;
-	return 0;
-}
-#endif
-
-#endif /* ISCSI_IBFT_H */
diff --git a/ANDROID_3.4.5/include/linux/isdn.h b/ANDROID_3.4.5/include/linux/isdn.h
deleted file mode 100644
index 292f27a7..00000000
--- a/ANDROID_3.4.5/include/linux/isdn.h
+++ /dev/null
@@ -1,622 +0,0 @@
-/* $Id: isdn.h,v 1.125.2.3 2004/02/10 01:07:14 keil Exp $
- *
- * Main header for the Linux ISDN subsystem (linklevel).
- *
- * Copyright 1994,95,96 by Fritz Elfert (fritz@isdn4linux.de)
- * Copyright 1995,96    by Thinking Objects Software GmbH Wuerzburg
- * Copyright 1995,96    by Michael Hipp (Michael.Hipp@student.uni-tuebingen.de)
- * 
- * This software may be used and distributed according to the terms
- * of the GNU General Public License, incorporated herein by reference.
- *
- */
-
-#ifndef __ISDN_H__
-#define __ISDN_H__
-
-#include <linux/ioctl.h>
-
-#define ISDN_MAX_DRIVERS    32
-#define ISDN_MAX_CHANNELS   64
-
-/* New ioctl-codes */
-#define IIOCNETAIF  _IO('I',1)
-#define IIOCNETDIF  _IO('I',2)
-#define IIOCNETSCF  _IO('I',3)
-#define IIOCNETGCF  _IO('I',4)
-#define IIOCNETANM  _IO('I',5)
-#define IIOCNETDNM  _IO('I',6)
-#define IIOCNETGNM  _IO('I',7)
-#define IIOCGETSET  _IO('I',8) /* no longer supported */
-#define IIOCSETSET  _IO('I',9) /* no longer supported */
-#define IIOCSETVER  _IO('I',10)
-#define IIOCNETHUP  _IO('I',11)
-#define IIOCSETGST  _IO('I',12)
-#define IIOCSETBRJ  _IO('I',13)
-#define IIOCSIGPRF  _IO('I',14)
-#define IIOCGETPRF  _IO('I',15)
-#define IIOCSETPRF  _IO('I',16)
-#define IIOCGETMAP  _IO('I',17)
-#define IIOCSETMAP  _IO('I',18)
-#define IIOCNETASL  _IO('I',19)
-#define IIOCNETDIL  _IO('I',20)
-#define IIOCGETCPS  _IO('I',21)
-#define IIOCGETDVR  _IO('I',22)
-#define IIOCNETLCR  _IO('I',23) /* dwabc ioctl for LCR from isdnlog */
-#define IIOCNETDWRSET  _IO('I',24) /* dwabc ioctl to reset abc-values to default on a net-interface */
-
-#define IIOCNETALN  _IO('I',32)
-#define IIOCNETDLN  _IO('I',33)
-
-#define IIOCNETGPN  _IO('I',34)
-
-#define IIOCDBGVAR  _IO('I',127)
-
-#define IIOCDRVCTL  _IO('I',128)
-
-/* cisco hdlck device private ioctls */
-#define SIOCGKEEPPERIOD	(SIOCDEVPRIVATE + 0)
-#define SIOCSKEEPPERIOD	(SIOCDEVPRIVATE + 1)
-#define SIOCGDEBSERINT	(SIOCDEVPRIVATE + 2)
-#define SIOCSDEBSERINT	(SIOCDEVPRIVATE + 3)
-
-/* Packet encapsulations for net-interfaces */
-#define ISDN_NET_ENCAP_ETHER      0
-#define ISDN_NET_ENCAP_RAWIP      1
-#define ISDN_NET_ENCAP_IPTYP      2
-#define ISDN_NET_ENCAP_CISCOHDLC  3 /* Without SLARP and keepalive */
-#define ISDN_NET_ENCAP_SYNCPPP    4
-#define ISDN_NET_ENCAP_UIHDLC     5
-#define ISDN_NET_ENCAP_CISCOHDLCK 6 /* With SLARP and keepalive    */
-#define ISDN_NET_ENCAP_X25IFACE   7 /* Documentation/networking/x25-iface.txt */
-#define ISDN_NET_ENCAP_MAX_ENCAP  ISDN_NET_ENCAP_X25IFACE
-
-/* Facility which currently uses an ISDN-channel */
-#define ISDN_USAGE_NONE       0
-#define ISDN_USAGE_RAW        1
-#define ISDN_USAGE_MODEM      2
-#define ISDN_USAGE_NET        3
-#define ISDN_USAGE_VOICE      4
-#define ISDN_USAGE_FAX        5
-#define ISDN_USAGE_MASK       7 /* Mask to get plain usage */
-#define ISDN_USAGE_DISABLED  32 /* This bit is set, if channel is disabled */
-#define ISDN_USAGE_EXCLUSIVE 64 /* This bit is set, if channel is exclusive */
-#define ISDN_USAGE_OUTGOING 128 /* This bit is set, if channel is outgoing  */
-
-#define ISDN_MODEM_NUMREG    24        /* Number of Modem-Registers        */
-#define ISDN_LMSNLEN         255 /* Length of tty's Listen-MSN string */
-#define ISDN_CMSGLEN	     50	 /* Length of CONNECT-Message to add for Modem */
-
-#define ISDN_MSNLEN          32
-#define NET_DV 0x06  /* Data version for isdn_net_ioctl_cfg   */
-#define TTY_DV 0x06  /* Data version for iprofd etc.          */
-
-#define INF_DV 0x01  /* Data version for /dev/isdninfo        */
-
-typedef struct {
-  char drvid[25];
-  unsigned long arg;
-} isdn_ioctl_struct;
-
-typedef struct {
-  char name[10];
-  char phone[ISDN_MSNLEN];
-  int  outgoing;
-} isdn_net_ioctl_phone;
-
-typedef struct {
-  char name[10];     /* Name of interface                     */
-  char master[10];   /* Name of Master for Bundling           */
-  char slave[10];    /* Name of Slave for Bundling            */
-  char eaz[256];     /* EAZ/MSN                               */
-  char drvid[25];    /* DriverId for Bindings                 */
-  int  onhtime;      /* Hangup-Timeout                        */
-  int  charge;       /* Charge-Units                          */
-  int  l2_proto;     /* Layer-2 protocol                      */
-  int  l3_proto;     /* Layer-3 protocol                      */
-  int  p_encap;      /* Encapsulation                         */
-  int  exclusive;    /* Channel, if bound exclusive           */
-  int  dialmax;      /* Dial Retry-Counter                    */
-  int  slavedelay;   /* Delay until slave starts up           */
-  int  cbdelay;      /* Delay before Callback                 */
-  int  chargehup;    /* Flag: Charge-Hangup                   */
-  int  ihup;         /* Flag: Hangup-Timeout on incoming line */
-  int  secure;       /* Flag: Secure                          */
-  int  callback;     /* Flag: Callback                        */
-  int  cbhup;        /* Flag: Reject Call before Callback     */
-  int  pppbind;      /* ippp device for bindings              */
-  int  chargeint;    /* Use fixed charge interval length      */
-  int  triggercps;   /* BogoCPS needed for triggering slave   */
-  int  dialtimeout;  /* Dial-Timeout                          */
-  int  dialwait;     /* Time to wait after failed dial        */
-  int  dialmode;     /* Flag: off / on / auto                 */
-} isdn_net_ioctl_cfg;
-
-#define ISDN_NET_DIALMODE_MASK  0xC0    /* bits for status                */
-#define ISDN_NET_DM_OFF	        0x00    /* this interface is stopped      */
-#define ISDN_NET_DM_MANUAL	0x40    /* this interface is on (manual)  */
-#define ISDN_NET_DM_AUTO	0x80    /* this interface is autodial     */
-#define ISDN_NET_DIALMODE(x) ((&(x))->flags & ISDN_NET_DIALMODE_MASK)
-
-#ifdef __KERNEL__
-
-#include <linux/errno.h>
-#include <linux/fs.h>
-#include <linux/major.h>
-#include <asm/io.h>
-#include <linux/kernel.h>
-#include <linux/signal.h>
-#include <linux/slab.h>
-#include <linux/timer.h>
-#include <linux/wait.h>
-#include <linux/tty.h>
-#include <linux/tty_flip.h>
-#include <linux/serial_reg.h>
-#include <linux/fcntl.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/ip.h>
-#include <linux/in.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/skbuff.h>
-#include <linux/tcp.h>
-#include <linux/mutex.h>
-
-#define ISDN_TTY_MAJOR    43
-#define ISDN_TTYAUX_MAJOR 44
-#define ISDN_MAJOR        45
-
-/* The minor-devicenumbers for Channel 0 and 1 are used as arguments for
- * physical Channel-Mapping, so they MUST NOT be changed without changing
- * the correspondent code in isdn.c
- */
-
-#define ISDN_MINOR_B        0
-#define ISDN_MINOR_BMAX     (ISDN_MAX_CHANNELS-1)
-#define ISDN_MINOR_CTRL     64
-#define ISDN_MINOR_CTRLMAX  (64 + (ISDN_MAX_CHANNELS-1))
-#define ISDN_MINOR_PPP      128
-#define ISDN_MINOR_PPPMAX   (128 + (ISDN_MAX_CHANNELS-1))
-#define ISDN_MINOR_STATUS   255
-
-#ifdef CONFIG_ISDN_PPP
-
-#ifdef CONFIG_ISDN_PPP_VJ
-#  include <net/slhc_vj.h>
-#endif
-
-#include <linux/ppp_defs.h>
-#include <linux/ppp-ioctl.h>
-
-#include <linux/isdn_ppp.h>
-#endif
-
-#ifdef CONFIG_ISDN_X25
-#  include <linux/concap.h>
-#endif
-
-#include <linux/isdnif.h>
-
-#define ISDN_DRVIOCTL_MASK       0x7f  /* Mask for Device-ioctl */
-
-/* Until now unused */
-#define ISDN_SERVICE_VOICE 1
-#define ISDN_SERVICE_AB    1<<1 
-#define ISDN_SERVICE_X21   1<<2
-#define ISDN_SERVICE_G4    1<<3
-#define ISDN_SERVICE_BTX   1<<4
-#define ISDN_SERVICE_DFUE  1<<5
-#define ISDN_SERVICE_X25   1<<6
-#define ISDN_SERVICE_TTX   1<<7
-#define ISDN_SERVICE_MIXED 1<<8
-#define ISDN_SERVICE_FW    1<<9
-#define ISDN_SERVICE_GTEL  1<<10
-#define ISDN_SERVICE_BTXN  1<<11
-#define ISDN_SERVICE_BTEL  1<<12
-
-/* Macros checking plain usage */
-#define USG_NONE(x)         ((x & ISDN_USAGE_MASK)==ISDN_USAGE_NONE)
-#define USG_RAW(x)          ((x & ISDN_USAGE_MASK)==ISDN_USAGE_RAW)
-#define USG_MODEM(x)        ((x & ISDN_USAGE_MASK)==ISDN_USAGE_MODEM)
-#define USG_VOICE(x)        ((x & ISDN_USAGE_MASK)==ISDN_USAGE_VOICE)
-#define USG_NET(x)          ((x & ISDN_USAGE_MASK)==ISDN_USAGE_NET)
-#define USG_FAX(x)          ((x & ISDN_USAGE_MASK)==ISDN_USAGE_FAX)
-#define USG_OUTGOING(x)     ((x & ISDN_USAGE_OUTGOING)==ISDN_USAGE_OUTGOING)
-#define USG_MODEMORVOICE(x) (((x & ISDN_USAGE_MASK)==ISDN_USAGE_MODEM) || \
-                             ((x & ISDN_USAGE_MASK)==ISDN_USAGE_VOICE)     )
-
-/* Timer-delays and scheduling-flags */
-#define ISDN_TIMER_RES         4                         /* Main Timer-Resolution   */
-#define ISDN_TIMER_02SEC       (HZ/ISDN_TIMER_RES/5)     /* Slow-Timer1 .2 sec      */
-#define ISDN_TIMER_1SEC        (HZ/ISDN_TIMER_RES)       /* Slow-Timer2 1 sec       */
-#define ISDN_TIMER_RINGING     5 /* tty RINGs = ISDN_TIMER_1SEC * this factor       */
-#define ISDN_TIMER_KEEPINT    10 /* Cisco-Keepalive = ISDN_TIMER_1SEC * this factor */
-#define ISDN_TIMER_MODEMREAD   1
-#define ISDN_TIMER_MODEMPLUS   2
-#define ISDN_TIMER_MODEMRING   4
-#define ISDN_TIMER_MODEMXMIT   8
-#define ISDN_TIMER_NETDIAL    16 
-#define ISDN_TIMER_NETHANGUP  32
-#define ISDN_TIMER_CARRIER   256 /* Wait for Carrier */
-#define ISDN_TIMER_FAST      (ISDN_TIMER_MODEMREAD | ISDN_TIMER_MODEMPLUS | \
-                              ISDN_TIMER_MODEMXMIT)
-#define ISDN_TIMER_SLOW      (ISDN_TIMER_MODEMRING | ISDN_TIMER_NETHANGUP | \
-                              ISDN_TIMER_NETDIAL | ISDN_TIMER_CARRIER)
-
-/* Timeout-Values for isdn_net_dial() */
-#define ISDN_TIMER_DTIMEOUT10 (10*HZ/(ISDN_TIMER_02SEC*(ISDN_TIMER_RES+1)))
-#define ISDN_TIMER_DTIMEOUT15 (15*HZ/(ISDN_TIMER_02SEC*(ISDN_TIMER_RES+1)))
-#define ISDN_TIMER_DTIMEOUT60 (60*HZ/(ISDN_TIMER_02SEC*(ISDN_TIMER_RES+1)))
-
-/* GLOBAL_FLAGS */
-#define ISDN_GLOBAL_STOPPED 1
-
-/*=================== Start of ip-over-ISDN stuff =========================*/
-
-/* Feature- and status-flags for a net-interface */
-#define ISDN_NET_CONNECTED  0x01       /* Bound to ISDN-Channel             */
-#define ISDN_NET_SECURE     0x02       /* Accept calls from phonelist only  */
-#define ISDN_NET_CALLBACK   0x04       /* activate callback                 */
-#define ISDN_NET_CBHUP      0x08       /* hangup before callback            */
-#define ISDN_NET_CBOUT      0x10       /* remote machine does callback      */
-
-#define ISDN_NET_MAGIC      0x49344C02 /* for paranoia-checking             */
-
-/* Phone-list-element */
-typedef struct {
-  void *next;
-  char num[ISDN_MSNLEN];
-} isdn_net_phone;
-
-/*
-   Principles when extending structures for generic encapsulation protocol
-   ("concap") support:
-   - Stuff which is hardware specific (here i4l-specific) goes in 
-     the netdev -> local structure (here: isdn_net_local)
-   - Stuff which is encapsulation protocol specific goes in the structure
-     which holds the linux device structure (here: isdn_net_device)
-*/
-
-/* Local interface-data */
-typedef struct isdn_net_local_s {
-  ulong                  magic;
-  struct net_device_stats stats;       /* Ethernet Statistics              */
-  int                    isdn_device;  /* Index to isdn-device             */
-  int                    isdn_channel; /* Index to isdn-channel            */
-  int			 ppp_slot;     /* PPPD device slot number          */
-  int                    pre_device;   /* Preselected isdn-device          */
-  int                    pre_channel;  /* Preselected isdn-channel         */
-  int                    exclusive;    /* If non-zero idx to reserved chan.*/
-  int                    flags;        /* Connection-flags                 */
-  int                    dialretry;    /* Counter for Dialout-retries      */
-  int                    dialmax;      /* Max. Number of Dial-retries      */
-  int                    cbdelay;      /* Delay before Callback starts     */
-  int                    dtimer;       /* Timeout-counter for dialing      */
-  char                   msn[ISDN_MSNLEN]; /* MSNs/EAZs for this interface */
-  u_char                 cbhup;        /* Flag: Reject Call before Callback*/
-  u_char                 dialstate;    /* State for dialing                */
-  u_char                 p_encap;      /* Packet encapsulation             */
-                                       /*   0 = Ethernet over ISDN         */
-				       /*   1 = RAW-IP                     */
-                                       /*   2 = IP with type field         */
-  u_char                 l2_proto;     /* Layer-2-protocol                 */
-				       /* See ISDN_PROTO_L2..-constants in */
-                                       /* isdnif.h                         */
-                                       /*   0 = X75/LAPB with I-Frames     */
-				       /*   1 = X75/LAPB with UI-Frames    */
-				       /*   2 = X75/LAPB with BUI-Frames   */
-				       /*   3 = HDLC                       */
-  u_char                 l3_proto;     /* Layer-3-protocol                 */
-				       /* See ISDN_PROTO_L3..-constants in */
-                                       /* isdnif.h                         */
-                                       /*   0 = Transparent                */
-  int                    huptimer;     /* Timeout-counter for auto-hangup  */
-  int                    charge;       /* Counter for charging units       */
-  ulong                  chargetime;   /* Timer for Charging info          */
-  int                    hupflags;     /* Flags for charge-unit-hangup:    */
-				       /* bit0: chargeint is invalid       */
-				       /* bit1: Getting charge-interval    */
-                                       /* bit2: Do charge-unit-hangup      */
-                                       /* bit3: Do hangup even on incoming */
-  int                    outgoing;     /* Flag: outgoing call              */
-  int                    onhtime;      /* Time to keep link up             */
-  int                    chargeint;    /* Interval between charge-infos    */
-  int                    onum;         /* Flag: at least 1 outgoing number */
-  int                    cps;          /* current speed of this interface  */
-  int                    transcount;   /* byte-counter for cps-calculation */
-  int                    sqfull;       /* Flag: netdev-queue overloaded    */
-  ulong                  sqfull_stamp; /* Start-Time of overload           */
-  ulong                  slavedelay;   /* Dynamic bundling delaytime       */
-  int                    triggercps;   /* BogoCPS needed for trigger slave */
-  isdn_net_phone         *phone[2];    /* List of remote-phonenumbers      */
-				       /* phone[0] = Incoming Numbers      */
-				       /* phone[1] = Outgoing Numbers      */
-  isdn_net_phone         *dial;        /* Pointer to dialed number         */
-  struct net_device      *master;      /* Ptr to Master device for slaves  */
-  struct net_device      *slave;       /* Ptr to Slave device for masters  */
-  struct isdn_net_local_s *next;       /* Ptr to next link in bundle       */
-  struct isdn_net_local_s *last;       /* Ptr to last link in bundle       */
-  struct isdn_net_dev_s  *netdev;      /* Ptr to netdev                    */
-  struct sk_buff_head    super_tx_queue; /* List of supervisory frames to  */
-	                               /* be transmitted asap              */
-  atomic_t frame_cnt;                  /* number of frames currently       */
-                        	       /* queued in HL driver              */    
-                                       /* Ptr to orig. hard_header_cache   */
-  spinlock_t             xmit_lock;    /* used to protect the xmit path of */
-                                       /* a particular channel (including  */
-                                       /* the frame_cnt                    */
-
-  int  pppbind;                        /* ippp device for bindings         */
-  int					dialtimeout;	/* How long shall we try on dialing? (jiffies) */
-  int					dialwait;		/* How long shall we wait after failed attempt? (jiffies) */
-  ulong					dialstarted;	/* jiffies of first dialing-attempt */
-  ulong					dialwait_timer;	/* jiffies of earliest next dialing-attempt */
-  int					huptimeout;		/* How long will the connection be up? (seconds) */
-#ifdef CONFIG_ISDN_X25
-  struct concap_device_ops *dops;      /* callbacks used by encapsulator   */
-#endif
-  /* use an own struct for that in later versions */
-  ulong cisco_myseq;                   /* Local keepalive seq. for Cisco   */
-  ulong cisco_mineseen;                /* returned keepalive seq. from remote */
-  ulong cisco_yourseq;                 /* Remote keepalive seq. for Cisco  */
-  int cisco_keepalive_period;		/* keepalive period */
-  ulong cisco_last_slarp_in;		/* jiffie of last keepalive packet we received */
-  char cisco_line_state;		/* state of line according to keepalive packets */
-  char cisco_debserint;			/* debugging flag of cisco hdlc with slarp */
-  struct timer_list cisco_timer;
-  struct work_struct tqueue;
-} isdn_net_local;
-
-/* the interface itself */
-typedef struct isdn_net_dev_s {
-  isdn_net_local *local;
-  isdn_net_local *queue;               /* circular list of all bundled
-					  channels, which are currently
-					  online                           */
-  spinlock_t queue_lock;               /* lock to protect queue            */
-  void *next;                          /* Pointer to next isdn-interface   */
-  struct net_device *dev;              /* interface to upper levels        */
-#ifdef CONFIG_ISDN_PPP
-  ippp_bundle * pb;		/* pointer to the common bundle structure
-   			         * with the per-bundle data */
-#endif
-#ifdef CONFIG_ISDN_X25
-  struct concap_proto  *cprot; /* connection oriented encapsulation protocol */
-#endif
-
-} isdn_net_dev;
-
-/*===================== End of ip-over-ISDN stuff ===========================*/
-
-/*======================= Start of ISDN-tty stuff ===========================*/
-
-#define ISDN_ASYNC_MAGIC          0x49344C01 /* for paranoia-checking        */
-#define ISDN_ASYNC_INITIALIZED	  0x80000000 /* port was initialized         */
-#define ISDN_ASYNC_CALLOUT_ACTIVE 0x40000000 /* Call out device active       */
-#define ISDN_ASYNC_NORMAL_ACTIVE  0x20000000 /* Normal device active         */
-#define ISDN_ASYNC_CLOSING	  0x08000000 /* Serial port is closing       */
-#define ISDN_ASYNC_CTS_FLOW	  0x04000000 /* Do CTS flow control          */
-#define ISDN_ASYNC_CHECK_CD	  0x02000000 /* i.e., CLOCAL                 */
-#define ISDN_ASYNC_HUP_NOTIFY         0x0001 /* Notify tty on hangups/closes */
-#define ISDN_ASYNC_SESSION_LOCKOUT    0x0100 /* Lock cua opens on session    */
-#define ISDN_ASYNC_PGRP_LOCKOUT       0x0200 /* Lock cua opens on pgrp       */
-#define ISDN_ASYNC_CALLOUT_NOHUP      0x0400 /* No hangup for cui            */
-#define ISDN_ASYNC_SPLIT_TERMIOS      0x0008 /* Sep. termios for dialin/out  */
-#define ISDN_SERIAL_XMIT_SIZE           1024 /* Default bufsize for write    */
-#define ISDN_SERIAL_XMIT_MAX            4000 /* Maximum bufsize for write    */
-#define ISDN_SERIAL_TYPE_NORMAL            1
-#define ISDN_SERIAL_TYPE_CALLOUT           2
-
-#ifdef CONFIG_ISDN_AUDIO
-/* For using sk_buffs with audio we need some private variables
- * within each sk_buff. For this purpose, we declare a struct here,
- * and put it always at the private skb->cb data array. A few macros help
- * accessing the variables.
- */
-typedef struct _isdn_audio_data {
-  unsigned short dle_count;
-  unsigned char  lock;
-} isdn_audio_data_t;
-
-#define ISDN_AUDIO_SKB_DLECOUNT(skb)	(((isdn_audio_data_t *)&skb->cb[0])->dle_count)
-#define ISDN_AUDIO_SKB_LOCK(skb)	(((isdn_audio_data_t *)&skb->cb[0])->lock)
-#endif
-
-/* Private data of AT-command-interpreter */
-typedef struct atemu {
-	u_char       profile[ISDN_MODEM_NUMREG]; /* Modem-Regs. Profile 0              */
-	u_char       mdmreg[ISDN_MODEM_NUMREG];  /* Modem-Registers                    */
-	char         pmsn[ISDN_MSNLEN];          /* EAZ/MSNs Profile 0                 */
-	char         msn[ISDN_MSNLEN];           /* EAZ/MSN                            */
-	char         plmsn[ISDN_LMSNLEN];        /* Listening MSNs Profile 0           */
-	char         lmsn[ISDN_LMSNLEN];         /* Listening MSNs                     */
-	char         cpn[ISDN_MSNLEN];           /* CalledPartyNumber on incoming call */
-	char         connmsg[ISDN_CMSGLEN];	 /* CONNECT-Msg from HL-Driver	       */
-#ifdef CONFIG_ISDN_AUDIO
-	u_char       vpar[10];                   /* Voice-parameters                   */
-	int          lastDLE;                    /* Flag for voice-coding: DLE seen    */
-#endif
-	int          mdmcmdl;                    /* Length of Modem-Commandbuffer      */
-	int          pluscount;                  /* Counter for +++ sequence           */
-	u_long       lastplus;                   /* Timestamp of last +                */
-	int	     carrierwait;                /* Seconds of carrier waiting         */
-	char         mdmcmd[255];                /* Modem-Commandbuffer                */
-	unsigned int charge;                     /* Charge units of current connection */
-} atemu;
-
-/* Private data (similar to async_struct in <linux/serial.h>) */
-typedef struct modem_info {
-  int			magic;
-  struct module		*owner;
-  int			flags;		 /* defined in tty.h               */
-  int			x_char;		 /* xon/xoff character             */
-  int			mcr;		 /* Modem control register         */
-  int                   msr;             /* Modem status register          */
-  int                   lsr;             /* Line status register           */
-  int			line;
-  int			count;		 /* # of fd on device              */
-  int			blocked_open;	 /* # of blocked opens             */
-  long			session;	 /* Session of opening process     */
-  long			pgrp;		 /* pgrp of opening process        */
-  int                   online;          /* 1 = B-Channel is up, drop data */
-					 /* 2 = B-Channel is up, deliver d.*/
-  int                   dialing;         /* Dial in progress or ATA        */
-  int                   rcvsched;        /* Receive needs schedule         */
-  int                   isdn_driver;	 /* Index to isdn-driver           */
-  int                   isdn_channel;    /* Index to isdn-channel          */
-  int                   drv_index;       /* Index to dev->usage            */
-  int                   ncarrier;        /* Flag: schedule NO CARRIER      */
-  unsigned char         last_cause[8];   /* Last cause message             */
-  unsigned char         last_num[ISDN_MSNLEN];
-	                                 /* Last phone-number              */
-  unsigned char         last_l2;         /* Last layer-2 protocol          */
-  unsigned char         last_si;         /* Last service                   */
-  unsigned char         last_lhup;       /* Last hangup local?             */
-  unsigned char         last_dir;        /* Last direction (in or out)     */
-  struct timer_list     nc_timer;        /* Timer for delayed NO CARRIER   */
-  int                   send_outstanding;/* # of outstanding send-requests */
-  int                   xmit_size;       /* max. # of chars in xmit_buf    */
-  int                   xmit_count;      /* # of chars in xmit_buf         */
-  unsigned char         *xmit_buf;       /* transmit buffer                */
-  struct sk_buff_head   xmit_queue;      /* transmit queue                 */
-  atomic_t              xmit_lock;       /* Semaphore for isdn_tty_write   */
-#ifdef CONFIG_ISDN_AUDIO
-  int                   vonline;         /* Voice-channel status           */
-					 /* Bit 0 = recording              */
-					 /* Bit 1 = playback               */
-					 /* Bit 2 = playback, DLE-ETX seen */
-  struct sk_buff_head   dtmf_queue;      /* queue for dtmf results         */
-  void                  *adpcms;         /* state for adpcm decompression  */
-  void                  *adpcmr;         /* state for adpcm compression    */
-  void                  *dtmf_state;     /* state for dtmf decoder         */
-  void                  *silence_state;  /* state for silence detection    */
-#endif
-#ifdef CONFIG_ISDN_TTY_FAX
-  struct T30_s		*fax;		 /* T30 Fax Group 3 data/interface */
-  int			faxonline;	 /* Fax-channel status             */
-#endif
-  struct tty_struct 	*tty;            /* Pointer to corresponding tty   */
-  atemu                 emu;             /* AT-emulator data               */
-  struct ktermios	normal_termios;  /* For saving termios structs     */
-  struct ktermios	callout_termios;
-  wait_queue_head_t	open_wait, close_wait;
-  spinlock_t	        readlock;
-} modem_info;
-
-#define ISDN_MODEM_WINSIZE 8
-
-/* Description of one ISDN-tty */
-typedef struct _isdn_modem {
-  int                refcount;				/* Number of opens        */
-  struct tty_driver  *tty_modem;			/* tty-device             */
-  struct tty_struct  *modem_table[ISDN_MAX_CHANNELS];	/* ?? copied from Orig    */
-  struct ktermios     *modem_termios[ISDN_MAX_CHANNELS];
-  struct ktermios     *modem_termios_locked[ISDN_MAX_CHANNELS];
-  modem_info         info[ISDN_MAX_CHANNELS];	   /* Private data           */
-} isdn_modem_t;
-
-/*======================= End of ISDN-tty stuff ============================*/
-
-/*======================== Start of V.110 stuff ============================*/
-#define V110_BUFSIZE 1024
-
-typedef struct {
-	int nbytes;                    /* 1 Matrixbyte -> nbytes in stream     */
-	int nbits;                     /* Number of used bits in streambyte    */
-	unsigned char key;             /* Bitmask in stream eg. 11 (nbits=2)   */
-	int decodelen;                 /* Amount of data in decodebuf          */
-	int SyncInit;                  /* Number of sync frames to send        */
-	unsigned char *OnlineFrame;    /* Precalculated V110 idle frame        */
-	unsigned char *OfflineFrame;   /* Precalculated V110 sync Frame        */
-	int framelen;                  /* Length of frames                     */
-	int skbuser;                   /* Number of unacked userdata skbs      */
-	int skbidle;                   /* Number of unacked idle/sync skbs     */
-	int introducer;                /* Local vars for decoder               */
-	int dbit;
-	unsigned char b;
-	int skbres;                    /* space to reserve in outgoing skb     */
-	int maxsize;                   /* maxbufsize of lowlevel driver        */
-	unsigned char *encodebuf;      /* temporary buffer for encoding        */
-	unsigned char decodebuf[V110_BUFSIZE]; /* incomplete V110 matrices     */
-} isdn_v110_stream;
-
-/*========================= End of V.110 stuff =============================*/
-
-/*======================= Start of general stuff ===========================*/
-
-typedef struct {
-	char *next;
-	char *private;
-} infostruct;
-
-#define DRV_FLAG_RUNNING 1
-#define DRV_FLAG_REJBUS  2
-#define DRV_FLAG_LOADED  4
-
-/* Description of hardware-level-driver */
-typedef struct _isdn_driver {
-	ulong               online;           /* Channel-Online flags             */
-	ulong               flags;            /* Misc driver Flags                */
-	int                 locks;            /* Number of locks for this driver  */
-	int                 channels;         /* Number of channels               */
-	wait_queue_head_t   st_waitq;         /* Wait-Queue for status-read's     */
-	int                 maxbufsize;       /* Maximum Buffersize supported     */
-	unsigned long       pktcount;         /* Until now: unused                */
-	int                 stavail;          /* Chars avail on Status-device     */
-	isdn_if            *interface;        /* Interface to driver              */
-	int                *rcverr;           /* Error-counters for B-Ch.-receive */
-	int                *rcvcount;         /* Byte-counters for B-Ch.-receive  */
-#ifdef CONFIG_ISDN_AUDIO
-	unsigned long      DLEflag;           /* Flags: Insert DLE at next read   */
-#endif
-	struct sk_buff_head *rpqueue;         /* Pointers to start of Rcv-Queue   */
-	wait_queue_head_t  *rcv_waitq;       /* Wait-Queues for B-Channel-Reads  */
-	wait_queue_head_t  *snd_waitq;       /* Wait-Queue for B-Channel-Send's  */
-	char               msn2eaz[10][ISDN_MSNLEN];  /* Mapping-Table MSN->EAZ   */
-} isdn_driver_t;
-
-/* Main driver-data */
-typedef struct isdn_devt {
-	struct module     *owner;
-	spinlock_t	  lock;
-	unsigned short    flags;		      /* Bitmapped Flags:           */
-	int               drivers;		      /* Current number of drivers  */
-	int               channels;		      /* Current number of channels */
-	int               net_verbose;                /* Verbose-Flag               */
-	int               modempoll;		      /* Flag: tty-read active      */
-	spinlock_t	  timerlock;
-	int               tflags;                     /* Timer-Flags:               */
-	/*  see ISDN_TIMER_..defines  */
-	int               global_flags;
-	infostruct        *infochain;                 /* List of open info-devs.    */
-	wait_queue_head_t info_waitq;                 /* Wait-Queue for isdninfo    */
-	struct timer_list timer;		      /* Misc.-function Timer       */
-	int               chanmap[ISDN_MAX_CHANNELS]; /* Map minor->device-channel  */
-	int               drvmap[ISDN_MAX_CHANNELS];  /* Map minor->driver-index    */
-	int               usage[ISDN_MAX_CHANNELS];   /* Used by tty/ip/voice       */
-	char              num[ISDN_MAX_CHANNELS][ISDN_MSNLEN];
-	/* Remote number of active ch.*/
-	int               m_idx[ISDN_MAX_CHANNELS];   /* Index for mdm....          */
-	isdn_driver_t     *drv[ISDN_MAX_DRIVERS];     /* Array of drivers           */
-	isdn_net_dev      *netdev;		      /* Linked list of net-if's    */
-	char              drvid[ISDN_MAX_DRIVERS][20];/* Driver-ID                 */
-	struct task_struct *profd;                    /* For iprofd                 */
-	isdn_modem_t      mdm;			      /* tty-driver-data            */
-	isdn_net_dev      *rx_netdev[ISDN_MAX_CHANNELS]; /* rx netdev-pointers     */
-	isdn_net_dev      *st_netdev[ISDN_MAX_CHANNELS]; /* stat netdev-pointers   */
-	ulong             ibytes[ISDN_MAX_CHANNELS];  /* Statistics incoming bytes  */
-	ulong             obytes[ISDN_MAX_CHANNELS];  /* Statistics outgoing bytes  */
-	int               v110emu[ISDN_MAX_CHANNELS]; /* V.110 emulator-mode 0=none */
-	atomic_t          v110use[ISDN_MAX_CHANNELS]; /* Usage-Semaphore for stream */
-	isdn_v110_stream  *v110[ISDN_MAX_CHANNELS];   /* V.110 private data         */
-	struct mutex      mtx;                        /* serialize list access*/
-	unsigned long     global_features;
-} isdn_dev;
-
-extern isdn_dev *dev;
-
-
-#endif /* __KERNEL__ */
-
-#endif /* __ISDN_H__ */
diff --git a/ANDROID_3.4.5/include/linux/isdn/Kbuild b/ANDROID_3.4.5/include/linux/isdn/Kbuild
deleted file mode 100644
index 991cdb29..00000000
--- a/ANDROID_3.4.5/include/linux/isdn/Kbuild
+++ /dev/null
@@ -1 +0,0 @@
-header-y += capicmd.h
diff --git a/ANDROID_3.4.5/include/linux/isdn/capicmd.h b/ANDROID_3.4.5/include/linux/isdn/capicmd.h
deleted file mode 100644
index b58635f7..00000000
--- a/ANDROID_3.4.5/include/linux/isdn/capicmd.h
+++ /dev/null
@@ -1,115 +0,0 @@
-/* $Id: capicmd.h,v 1.2.6.2 2001/09/23 22:24:33 kai Exp $
- * 
- * CAPI 2.0 Interface for Linux
- * 
- * Copyright 1997 by Carsten Paeth <calle@calle.de>
- * 
- * This software may be used and distributed according to the terms
- * of the GNU General Public License, incorporated herein by reference.
- *
- */
-
-#ifndef __CAPICMD_H__
-#define __CAPICMD_H__
-
-#define CAPI_MSG_BASELEN		8
-#define CAPI_DATA_B3_REQ_LEN		(CAPI_MSG_BASELEN+4+4+2+2+2)
-#define CAPI_DATA_B3_RESP_LEN		(CAPI_MSG_BASELEN+4+2)
-
-/*----- CAPI commands -----*/
-#define CAPI_ALERT		    0x01
-#define CAPI_CONNECT		    0x02
-#define CAPI_CONNECT_ACTIVE	    0x03
-#define CAPI_CONNECT_B3_ACTIVE	    0x83
-#define CAPI_CONNECT_B3 	    0x82
-#define CAPI_CONNECT_B3_T90_ACTIVE  0x88
-#define CAPI_DATA_B3		    0x86
-#define CAPI_DISCONNECT_B3	    0x84
-#define CAPI_DISCONNECT 	    0x04
-#define CAPI_FACILITY		    0x80
-#define CAPI_INFO		    0x08
-#define CAPI_LISTEN		    0x05
-#define CAPI_MANUFACTURER	    0xff
-#define CAPI_RESET_B3		    0x87
-#define CAPI_SELECT_B_PROTOCOL	    0x41
-
-/*----- CAPI subcommands -----*/
-
-#define CAPI_REQ    0x80
-#define CAPI_CONF   0x81
-#define CAPI_IND    0x82
-#define CAPI_RESP   0x83
-
-/*----- CAPI combined commands -----*/
-
-#define CAPICMD(cmd,subcmd)	(((cmd)<<8)|(subcmd))
-
-#define CAPI_DISCONNECT_REQ		CAPICMD(CAPI_DISCONNECT,CAPI_REQ)
-#define CAPI_DISCONNECT_CONF		CAPICMD(CAPI_DISCONNECT,CAPI_CONF)
-#define CAPI_DISCONNECT_IND		CAPICMD(CAPI_DISCONNECT,CAPI_IND)
-#define CAPI_DISCONNECT_RESP		CAPICMD(CAPI_DISCONNECT,CAPI_RESP)
-
-#define CAPI_ALERT_REQ			CAPICMD(CAPI_ALERT,CAPI_REQ)
-#define CAPI_ALERT_CONF			CAPICMD(CAPI_ALERT,CAPI_CONF)
-
-#define CAPI_CONNECT_REQ		CAPICMD(CAPI_CONNECT,CAPI_REQ)
-#define CAPI_CONNECT_CONF		CAPICMD(CAPI_CONNECT,CAPI_CONF)
-#define CAPI_CONNECT_IND		CAPICMD(CAPI_CONNECT,CAPI_IND)
-#define CAPI_CONNECT_RESP		CAPICMD(CAPI_CONNECT,CAPI_RESP)
-
-#define CAPI_CONNECT_ACTIVE_REQ		CAPICMD(CAPI_CONNECT_ACTIVE,CAPI_REQ)
-#define CAPI_CONNECT_ACTIVE_CONF	CAPICMD(CAPI_CONNECT_ACTIVE,CAPI_CONF)
-#define CAPI_CONNECT_ACTIVE_IND		CAPICMD(CAPI_CONNECT_ACTIVE,CAPI_IND)
-#define CAPI_CONNECT_ACTIVE_RESP	CAPICMD(CAPI_CONNECT_ACTIVE,CAPI_RESP)
-
-#define CAPI_SELECT_B_PROTOCOL_REQ	CAPICMD(CAPI_SELECT_B_PROTOCOL,CAPI_REQ)
-#define CAPI_SELECT_B_PROTOCOL_CONF	CAPICMD(CAPI_SELECT_B_PROTOCOL,CAPI_CONF)
-
-#define CAPI_CONNECT_B3_ACTIVE_REQ	CAPICMD(CAPI_CONNECT_B3_ACTIVE,CAPI_REQ)
-#define CAPI_CONNECT_B3_ACTIVE_CONF	CAPICMD(CAPI_CONNECT_B3_ACTIVE,CAPI_CONF)
-#define CAPI_CONNECT_B3_ACTIVE_IND	CAPICMD(CAPI_CONNECT_B3_ACTIVE,CAPI_IND)
-#define CAPI_CONNECT_B3_ACTIVE_RESP	CAPICMD(CAPI_CONNECT_B3_ACTIVE,CAPI_RESP)
-
-#define CAPI_CONNECT_B3_REQ		CAPICMD(CAPI_CONNECT_B3,CAPI_REQ)
-#define CAPI_CONNECT_B3_CONF		CAPICMD(CAPI_CONNECT_B3,CAPI_CONF)
-#define CAPI_CONNECT_B3_IND		CAPICMD(CAPI_CONNECT_B3,CAPI_IND)
-#define CAPI_CONNECT_B3_RESP		CAPICMD(CAPI_CONNECT_B3,CAPI_RESP)
-
-
-#define CAPI_CONNECT_B3_T90_ACTIVE_IND	CAPICMD(CAPI_CONNECT_B3_T90_ACTIVE,CAPI_IND)
-#define CAPI_CONNECT_B3_T90_ACTIVE_RESP	CAPICMD(CAPI_CONNECT_B3_T90_ACTIVE,CAPI_RESP)
-
-#define CAPI_DATA_B3_REQ		CAPICMD(CAPI_DATA_B3,CAPI_REQ)
-#define CAPI_DATA_B3_CONF		CAPICMD(CAPI_DATA_B3,CAPI_CONF)
-#define CAPI_DATA_B3_IND		CAPICMD(CAPI_DATA_B3,CAPI_IND)
-#define CAPI_DATA_B3_RESP		CAPICMD(CAPI_DATA_B3,CAPI_RESP)
-
-#define CAPI_DISCONNECT_B3_REQ		CAPICMD(CAPI_DISCONNECT_B3,CAPI_REQ)
-#define CAPI_DISCONNECT_B3_CONF		CAPICMD(CAPI_DISCONNECT_B3,CAPI_CONF)
-#define CAPI_DISCONNECT_B3_IND		CAPICMD(CAPI_DISCONNECT_B3,CAPI_IND)
-#define CAPI_DISCONNECT_B3_RESP		CAPICMD(CAPI_DISCONNECT_B3,CAPI_RESP)
-
-#define CAPI_RESET_B3_REQ		CAPICMD(CAPI_RESET_B3,CAPI_REQ)
-#define CAPI_RESET_B3_CONF		CAPICMD(CAPI_RESET_B3,CAPI_CONF)
-#define CAPI_RESET_B3_IND		CAPICMD(CAPI_RESET_B3,CAPI_IND)
-#define CAPI_RESET_B3_RESP		CAPICMD(CAPI_RESET_B3,CAPI_RESP)
-
-#define CAPI_LISTEN_REQ			CAPICMD(CAPI_LISTEN,CAPI_REQ)
-#define CAPI_LISTEN_CONF		CAPICMD(CAPI_LISTEN,CAPI_CONF)
-
-#define CAPI_MANUFACTURER_REQ		CAPICMD(CAPI_MANUFACTURER,CAPI_REQ)
-#define CAPI_MANUFACTURER_CONF		CAPICMD(CAPI_MANUFACTURER,CAPI_CONF)
-#define CAPI_MANUFACTURER_IND		CAPICMD(CAPI_MANUFACTURER,CAPI_IND)
-#define CAPI_MANUFACTURER_RESP		CAPICMD(CAPI_MANUFACTURER,CAPI_RESP)
-
-#define CAPI_FACILITY_REQ		CAPICMD(CAPI_FACILITY,CAPI_REQ)
-#define CAPI_FACILITY_CONF		CAPICMD(CAPI_FACILITY,CAPI_CONF)
-#define CAPI_FACILITY_IND		CAPICMD(CAPI_FACILITY,CAPI_IND)
-#define CAPI_FACILITY_RESP		CAPICMD(CAPI_FACILITY,CAPI_RESP)
-
-#define CAPI_INFO_REQ			CAPICMD(CAPI_INFO,CAPI_REQ)
-#define CAPI_INFO_CONF			CAPICMD(CAPI_INFO,CAPI_CONF)
-#define CAPI_INFO_IND			CAPICMD(CAPI_INFO,CAPI_IND)
-#define CAPI_INFO_RESP			CAPICMD(CAPI_INFO,CAPI_RESP)
-
-#endif				/* __CAPICMD_H__ */
diff --git a/ANDROID_3.4.5/include/linux/isdn/capilli.h b/ANDROID_3.4.5/include/linux/isdn/capilli.h
deleted file mode 100644
index 11b57c48..00000000
--- a/ANDROID_3.4.5/include/linux/isdn/capilli.h
+++ /dev/null
@@ -1,113 +0,0 @@
-/* $Id: capilli.h,v 1.1.2.2 2004/01/16 21:09:27 keil Exp $
- * 
- * Kernel CAPI 2.0 Driver Interface for Linux
- * 
- * Copyright 1999 by Carsten Paeth <calle@calle.de>
- * 
- * This software may be used and distributed according to the terms
- * of the GNU General Public License, incorporated herein by reference.
- *
- */
-
-#ifndef __CAPILLI_H__
-#define __CAPILLI_H__
-
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/capi.h>
-#include <linux/kernelcapi.h>
-
-typedef struct capiloaddatapart {
-	int user;		/* data in userspace ? */
-	int len;
-	unsigned char *data;
-} capiloaddatapart;
-
-typedef struct capiloaddata {
-	capiloaddatapart firmware;
-	capiloaddatapart configuration;
-} capiloaddata;
-
-typedef struct capicardparams {
-	unsigned int port;
-	unsigned irq;
-	int cardtype;
-	int cardnr;
-	unsigned int membase;
-} capicardparams;
-
-struct capi_ctr {
-	/* filled in before calling attach_capi_ctr */
-	struct module *owner;
-	void *driverdata;			/* driver specific */
-	char name[32];				/* name of controller */
-	char *driver_name;			/* name of driver */
-	int (*load_firmware)(struct capi_ctr *, capiloaddata *);
-	void (*reset_ctr)(struct capi_ctr *);
-	void (*register_appl)(struct capi_ctr *, u16 appl,
-			      capi_register_params *);
-	void (*release_appl)(struct capi_ctr *, u16 appl);
-	u16  (*send_message)(struct capi_ctr *, struct sk_buff *skb);
-	
-	char *(*procinfo)(struct capi_ctr *);
-	const struct file_operations *proc_fops;
-
-	/* filled in before calling ready callback */
-	u8 manu[CAPI_MANUFACTURER_LEN];		/* CAPI_GET_MANUFACTURER */
-	capi_version version;			/* CAPI_GET_VERSION */
-	capi_profile profile;			/* CAPI_GET_PROFILE */
-	u8 serial[CAPI_SERIAL_LEN];		/* CAPI_GET_SERIAL */
-
-	/* management information for kcapi */
-
-	unsigned long nrecvctlpkt;
-	unsigned long nrecvdatapkt;
-	unsigned long nsentctlpkt;
-	unsigned long nsentdatapkt;
-
-	int cnr;				/* controller number */
-	unsigned short state;			/* controller state */
-	int blocked;				/* output blocked */
-	int traceflag;				/* capi trace */
-	wait_queue_head_t state_wait_queue;
-
-	struct proc_dir_entry *procent;
-        char procfn[128];
-};
-
-int attach_capi_ctr(struct capi_ctr *);
-int detach_capi_ctr(struct capi_ctr *);
-
-void capi_ctr_ready(struct capi_ctr * card);
-void capi_ctr_down(struct capi_ctr * card);
-void capi_ctr_suspend_output(struct capi_ctr * card);
-void capi_ctr_resume_output(struct capi_ctr * card);
-void capi_ctr_handle_message(struct capi_ctr * card, u16 appl, struct sk_buff *skb);
-
-// ---------------------------------------------------------------------------
-// needed for AVM capi drivers
-
-struct capi_driver {
-	char name[32];				/* driver name */
-	char revision[32];
-
-	int (*add_card)(struct capi_driver *driver, capicardparams *data);
-
-	/* management information for kcapi */
-	struct list_head list; 
-};
-
-void register_capi_driver(struct capi_driver *driver);
-void unregister_capi_driver(struct capi_driver *driver);
-
-// ---------------------------------------------------------------------------
-// library functions for use by hardware controller drivers
-
-void capilib_new_ncci(struct list_head *head, u16 applid, u32 ncci, u32 winsize);
-void capilib_free_ncci(struct list_head *head, u16 applid, u32 ncci);
-void capilib_release_appl(struct list_head *head, u16 applid);
-void capilib_release(struct list_head *head);
-void capilib_data_b3_conf(struct list_head *head, u16 applid, u32 ncci, u16 msgid);
-u16  capilib_data_b3_req(struct list_head *head, u16 applid, u32 ncci, u16 msgid);
-
-#endif				/* __CAPILLI_H__ */
diff --git a/ANDROID_3.4.5/include/linux/isdn/capiutil.h b/ANDROID_3.4.5/include/linux/isdn/capiutil.h
deleted file mode 100644
index 5a52f2c9..00000000
--- a/ANDROID_3.4.5/include/linux/isdn/capiutil.h
+++ /dev/null
@@ -1,521 +0,0 @@
-/* $Id: capiutil.h,v 1.5.6.2 2001/09/23 22:24:33 kai Exp $
- *
- * CAPI 2.0 defines & types
- *
- * From CAPI 2.0 Development Kit AVM 1995 (msg.c)
- * Rewritten for Linux 1996 by Carsten Paeth <calle@calle.de>
- *
- * This software may be used and distributed according to the terms
- * of the GNU General Public License, incorporated herein by reference.
- *
- */
-
-#ifndef __CAPIUTIL_H__
-#define __CAPIUTIL_H__
-
-#include <asm/types.h>
-
-#define CAPIMSG_BASELEN		8
-#define CAPIMSG_U8(m, off)	(m[off])
-#define CAPIMSG_U16(m, off)	(m[off]|(m[(off)+1]<<8))
-#define CAPIMSG_U32(m, off)	(m[off]|(m[(off)+1]<<8)|(m[(off)+2]<<16)|(m[(off)+3]<<24))
-#define	CAPIMSG_LEN(m)		CAPIMSG_U16(m,0)
-#define	CAPIMSG_APPID(m)	CAPIMSG_U16(m,2)
-#define	CAPIMSG_COMMAND(m)	CAPIMSG_U8(m,4)
-#define	CAPIMSG_SUBCOMMAND(m)	CAPIMSG_U8(m,5)
-#define CAPIMSG_CMD(m)		(((m[4])<<8)|(m[5]))
-#define	CAPIMSG_MSGID(m)	CAPIMSG_U16(m,6)
-#define CAPIMSG_CONTROLLER(m)	(m[8] & 0x7f)
-#define CAPIMSG_CONTROL(m)	CAPIMSG_U32(m, 8)
-#define CAPIMSG_NCCI(m)		CAPIMSG_CONTROL(m)
-#define CAPIMSG_DATALEN(m)	CAPIMSG_U16(m,16) /* DATA_B3_REQ */
-
-static inline void capimsg_setu8(void *m, int off, __u8 val)
-{
-	((__u8 *)m)[off] = val;
-}
-
-static inline void capimsg_setu16(void *m, int off, __u16 val)
-{
-	((__u8 *)m)[off] = val & 0xff;
-	((__u8 *)m)[off+1] = (val >> 8) & 0xff;
-}
-
-static inline void capimsg_setu32(void *m, int off, __u32 val)
-{
-	((__u8 *)m)[off] = val & 0xff;
-	((__u8 *)m)[off+1] = (val >> 8) & 0xff;
-	((__u8 *)m)[off+2] = (val >> 16) & 0xff;
-	((__u8 *)m)[off+3] = (val >> 24) & 0xff;
-}
-
-#define	CAPIMSG_SETLEN(m, len)		capimsg_setu16(m, 0, len)
-#define	CAPIMSG_SETAPPID(m, applid)	capimsg_setu16(m, 2, applid)
-#define	CAPIMSG_SETCOMMAND(m,cmd)	capimsg_setu8(m, 4, cmd)
-#define	CAPIMSG_SETSUBCOMMAND(m, cmd)	capimsg_setu8(m, 5, cmd)
-#define	CAPIMSG_SETMSGID(m, msgid)	capimsg_setu16(m, 6, msgid)
-#define	CAPIMSG_SETCONTROL(m, contr)	capimsg_setu32(m, 8, contr)
-#define	CAPIMSG_SETDATALEN(m, len)	capimsg_setu16(m, 16, len)
-
-/*----- basic-type definitions -----*/
-
-typedef __u8 *_cstruct;
-
-typedef enum {
-	CAPI_COMPOSE,
-	CAPI_DEFAULT
-} _cmstruct;
-
-/*
-   The _cmsg structure contains all possible CAPI 2.0 parameter.
-   All parameters are stored here first. The function CAPI_CMSG_2_MESSAGE
-   assembles the parameter and builds CAPI2.0 conform messages.
-   CAPI_MESSAGE_2_CMSG disassembles CAPI 2.0 messages and stores the
-   parameter in the _cmsg structure
- */
-
-typedef struct {
-	/* Header */
-	__u16 ApplId;
-	__u8 Command;
-	__u8 Subcommand;
-	__u16 Messagenumber;
-
-	/* Parameter */
-	union {
-		__u32 adrController;
-		__u32 adrPLCI;
-		__u32 adrNCCI;
-	} adr;
-
-	_cmstruct AdditionalInfo;
-	_cstruct B1configuration;
-	__u16 B1protocol;
-	_cstruct B2configuration;
-	__u16 B2protocol;
-	_cstruct B3configuration;
-	__u16 B3protocol;
-	_cstruct BC;
-	_cstruct BChannelinformation;
-	_cmstruct BProtocol;
-	_cstruct CalledPartyNumber;
-	_cstruct CalledPartySubaddress;
-	_cstruct CallingPartyNumber;
-	_cstruct CallingPartySubaddress;
-	__u32 CIPmask;
-	__u32 CIPmask2;
-	__u16 CIPValue;
-	__u32 Class;
-	_cstruct ConnectedNumber;
-	_cstruct ConnectedSubaddress;
-	__u32 Data;
-	__u16 DataHandle;
-	__u16 DataLength;
-	_cstruct FacilityConfirmationParameter;
-	_cstruct Facilitydataarray;
-	_cstruct FacilityIndicationParameter;
-	_cstruct FacilityRequestParameter;
-	__u16 FacilitySelector;
-	__u16 Flags;
-	__u32 Function;
-	_cstruct HLC;
-	__u16 Info;
-	_cstruct InfoElement;
-	__u32 InfoMask;
-	__u16 InfoNumber;
-	_cstruct Keypadfacility;
-	_cstruct LLC;
-	_cstruct ManuData;
-	__u32 ManuID;
-	_cstruct NCPI;
-	__u16 Reason;
-	__u16 Reason_B3;
-	__u16 Reject;
-	_cstruct Useruserdata;
-
-	/* intern */
-	unsigned l, p;
-	unsigned char *par;
-	__u8 *m;
-
-	/* buffer to construct message */
-	__u8 buf[180];
-
-} _cmsg;
-
-/*
- * capi_cmsg2message() assembles the parameter from _cmsg to a CAPI 2.0
- * conform message
- */
-unsigned capi_cmsg2message(_cmsg * cmsg, __u8 * msg);
-
-/*
- *  capi_message2cmsg disassembles a CAPI message an writes the parameter
- *  into _cmsg for easy access
- */
-unsigned capi_message2cmsg(_cmsg * cmsg, __u8 * msg);
-
-/*
- * capi_cmsg_header() fills the _cmsg structure with default values, so only
- * parameter with non default values must be changed before sending the
- * message.
- */
-unsigned capi_cmsg_header(_cmsg * cmsg, __u16 _ApplId,
-			  __u8 _Command, __u8 _Subcommand,
-			  __u16 _Messagenumber, __u32 _Controller);
-
-/*
- * capi_info2str generated a readable string for Capi2.0 reasons.
- */
-char *capi_info2str(__u16 reason);
-
-/*-----------------------------------------------------------------------*/
-
-/*
- * Debugging / Tracing functions
- */
-
-char *capi_cmd2str(__u8 cmd, __u8 subcmd);
-
-typedef struct {
-	u_char	*buf;
-	u_char	*p;
-	size_t	size;
-	size_t	pos;
-} _cdebbuf;
-
-#define	CDEBUG_SIZE	1024
-#define	CDEBUG_GSIZE	4096
-
-void cdebbuf_free(_cdebbuf *cdb);
-int cdebug_init(void);
-void cdebug_exit(void);
-
-_cdebbuf *capi_cmsg2str(_cmsg *cmsg);
-_cdebbuf *capi_message2str(__u8 *msg);
-
-/*-----------------------------------------------------------------------*/
-
-static inline void capi_cmsg_answer(_cmsg * cmsg)
-{
-	cmsg->Subcommand |= 0x01;
-}
-
-/*-----------------------------------------------------------------------*/
-
-static inline void capi_fill_CONNECT_B3_REQ(_cmsg * cmsg, __u16 ApplId, __u16 Messagenumber,
-					    __u32 adr,
-					    _cstruct NCPI)
-{
-	capi_cmsg_header(cmsg, ApplId, 0x82, 0x80, Messagenumber, adr);
-	cmsg->NCPI = NCPI;
-}
-
-static inline void capi_fill_FACILITY_REQ(_cmsg * cmsg, __u16 ApplId, __u16 Messagenumber,
-					  __u32 adr,
-					  __u16 FacilitySelector,
-				       _cstruct FacilityRequestParameter)
-{
-	capi_cmsg_header(cmsg, ApplId, 0x80, 0x80, Messagenumber, adr);
-	cmsg->FacilitySelector = FacilitySelector;
-	cmsg->FacilityRequestParameter = FacilityRequestParameter;
-}
-
-static inline void capi_fill_INFO_REQ(_cmsg * cmsg, __u16 ApplId, __u16 Messagenumber,
-				      __u32 adr,
-				      _cstruct CalledPartyNumber,
-				      _cstruct BChannelinformation,
-				      _cstruct Keypadfacility,
-				      _cstruct Useruserdata,
-				      _cstruct Facilitydataarray)
-{
-	capi_cmsg_header(cmsg, ApplId, 0x08, 0x80, Messagenumber, adr);
-	cmsg->CalledPartyNumber = CalledPartyNumber;
-	cmsg->BChannelinformation = BChannelinformation;
-	cmsg->Keypadfacility = Keypadfacility;
-	cmsg->Useruserdata = Useruserdata;
-	cmsg->Facilitydataarray = Facilitydataarray;
-}
-
-static inline void capi_fill_LISTEN_REQ(_cmsg * cmsg, __u16 ApplId, __u16 Messagenumber,
-					__u32 adr,
-					__u32 InfoMask,
-					__u32 CIPmask,
-					__u32 CIPmask2,
-					_cstruct CallingPartyNumber,
-					_cstruct CallingPartySubaddress)
-{
-	capi_cmsg_header(cmsg, ApplId, 0x05, 0x80, Messagenumber, adr);
-	cmsg->InfoMask = InfoMask;
-	cmsg->CIPmask = CIPmask;
-	cmsg->CIPmask2 = CIPmask2;
-	cmsg->CallingPartyNumber = CallingPartyNumber;
-	cmsg->CallingPartySubaddress = CallingPartySubaddress;
-}
-
-static inline void capi_fill_ALERT_REQ(_cmsg * cmsg, __u16 ApplId, __u16 Messagenumber,
-				       __u32 adr,
-				       _cstruct BChannelinformation,
-				       _cstruct Keypadfacility,
-				       _cstruct Useruserdata,
-				       _cstruct Facilitydataarray)
-{
-	capi_cmsg_header(cmsg, ApplId, 0x01, 0x80, Messagenumber, adr);
-	cmsg->BChannelinformation = BChannelinformation;
-	cmsg->Keypadfacility = Keypadfacility;
-	cmsg->Useruserdata = Useruserdata;
-	cmsg->Facilitydataarray = Facilitydataarray;
-}
-
-static inline void capi_fill_CONNECT_REQ(_cmsg * cmsg, __u16 ApplId, __u16 Messagenumber,
-					 __u32 adr,
-					 __u16 CIPValue,
-					 _cstruct CalledPartyNumber,
-					 _cstruct CallingPartyNumber,
-					 _cstruct CalledPartySubaddress,
-					 _cstruct CallingPartySubaddress,
-					 __u16 B1protocol,
-					 __u16 B2protocol,
-					 __u16 B3protocol,
-					 _cstruct B1configuration,
-					 _cstruct B2configuration,
-					 _cstruct B3configuration,
-					 _cstruct BC,
-					 _cstruct LLC,
-					 _cstruct HLC,
-					 _cstruct BChannelinformation,
-					 _cstruct Keypadfacility,
-					 _cstruct Useruserdata,
-					 _cstruct Facilitydataarray)
-{
-
-	capi_cmsg_header(cmsg, ApplId, 0x02, 0x80, Messagenumber, adr);
-	cmsg->CIPValue = CIPValue;
-	cmsg->CalledPartyNumber = CalledPartyNumber;
-	cmsg->CallingPartyNumber = CallingPartyNumber;
-	cmsg->CalledPartySubaddress = CalledPartySubaddress;
-	cmsg->CallingPartySubaddress = CallingPartySubaddress;
-	cmsg->B1protocol = B1protocol;
-	cmsg->B2protocol = B2protocol;
-	cmsg->B3protocol = B3protocol;
-	cmsg->B1configuration = B1configuration;
-	cmsg->B2configuration = B2configuration;
-	cmsg->B3configuration = B3configuration;
-	cmsg->BC = BC;
-	cmsg->LLC = LLC;
-	cmsg->HLC = HLC;
-	cmsg->BChannelinformation = BChannelinformation;
-	cmsg->Keypadfacility = Keypadfacility;
-	cmsg->Useruserdata = Useruserdata;
-	cmsg->Facilitydataarray = Facilitydataarray;
-}
-
-static inline void capi_fill_DATA_B3_REQ(_cmsg * cmsg, __u16 ApplId, __u16 Messagenumber,
-					 __u32 adr,
-					 __u32 Data,
-					 __u16 DataLength,
-					 __u16 DataHandle,
-					 __u16 Flags)
-{
-
-	capi_cmsg_header(cmsg, ApplId, 0x86, 0x80, Messagenumber, adr);
-	cmsg->Data = Data;
-	cmsg->DataLength = DataLength;
-	cmsg->DataHandle = DataHandle;
-	cmsg->Flags = Flags;
-}
-
-static inline void capi_fill_DISCONNECT_REQ(_cmsg * cmsg, __u16 ApplId, __u16 Messagenumber,
-					    __u32 adr,
-					    _cstruct BChannelinformation,
-					    _cstruct Keypadfacility,
-					    _cstruct Useruserdata,
-					    _cstruct Facilitydataarray)
-{
-
-	capi_cmsg_header(cmsg, ApplId, 0x04, 0x80, Messagenumber, adr);
-	cmsg->BChannelinformation = BChannelinformation;
-	cmsg->Keypadfacility = Keypadfacility;
-	cmsg->Useruserdata = Useruserdata;
-	cmsg->Facilitydataarray = Facilitydataarray;
-}
-
-static inline void capi_fill_DISCONNECT_B3_REQ(_cmsg * cmsg, __u16 ApplId, __u16 Messagenumber,
-					       __u32 adr,
-					       _cstruct NCPI)
-{
-
-	capi_cmsg_header(cmsg, ApplId, 0x84, 0x80, Messagenumber, adr);
-	cmsg->NCPI = NCPI;
-}
-
-static inline void capi_fill_MANUFACTURER_REQ(_cmsg * cmsg, __u16 ApplId, __u16 Messagenumber,
-					      __u32 adr,
-					      __u32 ManuID,
-					      __u32 Class,
-					      __u32 Function,
-					      _cstruct ManuData)
-{
-
-	capi_cmsg_header(cmsg, ApplId, 0xff, 0x80, Messagenumber, adr);
-	cmsg->ManuID = ManuID;
-	cmsg->Class = Class;
-	cmsg->Function = Function;
-	cmsg->ManuData = ManuData;
-}
-
-static inline void capi_fill_RESET_B3_REQ(_cmsg * cmsg, __u16 ApplId, __u16 Messagenumber,
-					  __u32 adr,
-					  _cstruct NCPI)
-{
-
-	capi_cmsg_header(cmsg, ApplId, 0x87, 0x80, Messagenumber, adr);
-	cmsg->NCPI = NCPI;
-}
-
-static inline void capi_fill_SELECT_B_PROTOCOL_REQ(_cmsg * cmsg, __u16 ApplId, __u16 Messagenumber,
-						   __u32 adr,
-						   __u16 B1protocol,
-						   __u16 B2protocol,
-						   __u16 B3protocol,
-						_cstruct B1configuration,
-						_cstruct B2configuration,
-						_cstruct B3configuration)
-{
-
-	capi_cmsg_header(cmsg, ApplId, 0x41, 0x80, Messagenumber, adr);
-	cmsg->B1protocol = B1protocol;
-	cmsg->B2protocol = B2protocol;
-	cmsg->B3protocol = B3protocol;
-	cmsg->B1configuration = B1configuration;
-	cmsg->B2configuration = B2configuration;
-	cmsg->B3configuration = B3configuration;
-}
-
-static inline void capi_fill_CONNECT_RESP(_cmsg * cmsg, __u16 ApplId, __u16 Messagenumber,
-					  __u32 adr,
-					  __u16 Reject,
-					  __u16 B1protocol,
-					  __u16 B2protocol,
-					  __u16 B3protocol,
-					  _cstruct B1configuration,
-					  _cstruct B2configuration,
-					  _cstruct B3configuration,
-					  _cstruct ConnectedNumber,
-					  _cstruct ConnectedSubaddress,
-					  _cstruct LLC,
-					  _cstruct BChannelinformation,
-					  _cstruct Keypadfacility,
-					  _cstruct Useruserdata,
-					  _cstruct Facilitydataarray)
-{
-	capi_cmsg_header(cmsg, ApplId, 0x02, 0x83, Messagenumber, adr);
-	cmsg->Reject = Reject;
-	cmsg->B1protocol = B1protocol;
-	cmsg->B2protocol = B2protocol;
-	cmsg->B3protocol = B3protocol;
-	cmsg->B1configuration = B1configuration;
-	cmsg->B2configuration = B2configuration;
-	cmsg->B3configuration = B3configuration;
-	cmsg->ConnectedNumber = ConnectedNumber;
-	cmsg->ConnectedSubaddress = ConnectedSubaddress;
-	cmsg->LLC = LLC;
-	cmsg->BChannelinformation = BChannelinformation;
-	cmsg->Keypadfacility = Keypadfacility;
-	cmsg->Useruserdata = Useruserdata;
-	cmsg->Facilitydataarray = Facilitydataarray;
-}
-
-static inline void capi_fill_CONNECT_ACTIVE_RESP(_cmsg * cmsg, __u16 ApplId, __u16 Messagenumber,
-						 __u32 adr)
-{
-
-	capi_cmsg_header(cmsg, ApplId, 0x03, 0x83, Messagenumber, adr);
-}
-
-static inline void capi_fill_CONNECT_B3_ACTIVE_RESP(_cmsg * cmsg, __u16 ApplId, __u16 Messagenumber,
-						    __u32 adr)
-{
-
-	capi_cmsg_header(cmsg, ApplId, 0x83, 0x83, Messagenumber, adr);
-}
-
-static inline void capi_fill_CONNECT_B3_RESP(_cmsg * cmsg, __u16 ApplId, __u16 Messagenumber,
-					     __u32 adr,
-					     __u16 Reject,
-					     _cstruct NCPI)
-{
-	capi_cmsg_header(cmsg, ApplId, 0x82, 0x83, Messagenumber, adr);
-	cmsg->Reject = Reject;
-	cmsg->NCPI = NCPI;
-}
-
-static inline void capi_fill_CONNECT_B3_T90_ACTIVE_RESP(_cmsg * cmsg, __u16 ApplId, __u16 Messagenumber,
-							__u32 adr)
-{
-
-	capi_cmsg_header(cmsg, ApplId, 0x88, 0x83, Messagenumber, adr);
-}
-
-static inline void capi_fill_DATA_B3_RESP(_cmsg * cmsg, __u16 ApplId, __u16 Messagenumber,
-					  __u32 adr,
-					  __u16 DataHandle)
-{
-
-	capi_cmsg_header(cmsg, ApplId, 0x86, 0x83, Messagenumber, adr);
-	cmsg->DataHandle = DataHandle;
-}
-
-static inline void capi_fill_DISCONNECT_B3_RESP(_cmsg * cmsg, __u16 ApplId, __u16 Messagenumber,
-						__u32 adr)
-{
-
-	capi_cmsg_header(cmsg, ApplId, 0x84, 0x83, Messagenumber, adr);
-}
-
-static inline void capi_fill_DISCONNECT_RESP(_cmsg * cmsg, __u16 ApplId, __u16 Messagenumber,
-					     __u32 adr)
-{
-
-	capi_cmsg_header(cmsg, ApplId, 0x04, 0x83, Messagenumber, adr);
-}
-
-static inline void capi_fill_FACILITY_RESP(_cmsg * cmsg, __u16 ApplId, __u16 Messagenumber,
-					   __u32 adr,
-					   __u16 FacilitySelector)
-{
-
-	capi_cmsg_header(cmsg, ApplId, 0x80, 0x83, Messagenumber, adr);
-	cmsg->FacilitySelector = FacilitySelector;
-}
-
-static inline void capi_fill_INFO_RESP(_cmsg * cmsg, __u16 ApplId, __u16 Messagenumber,
-				       __u32 adr)
-{
-
-	capi_cmsg_header(cmsg, ApplId, 0x08, 0x83, Messagenumber, adr);
-}
-
-static inline void capi_fill_MANUFACTURER_RESP(_cmsg * cmsg, __u16 ApplId, __u16 Messagenumber,
-					       __u32 adr,
-					       __u32 ManuID,
-					       __u32 Class,
-					       __u32 Function,
-					       _cstruct ManuData)
-{
-
-	capi_cmsg_header(cmsg, ApplId, 0xff, 0x83, Messagenumber, adr);
-	cmsg->ManuID = ManuID;
-	cmsg->Class = Class;
-	cmsg->Function = Function;
-	cmsg->ManuData = ManuData;
-}
-
-static inline void capi_fill_RESET_B3_RESP(_cmsg * cmsg, __u16 ApplId, __u16 Messagenumber,
-					   __u32 adr)
-{
-
-	capi_cmsg_header(cmsg, ApplId, 0x87, 0x83, Messagenumber, adr);
-}
-
-#endif				/* __CAPIUTIL_H__ */
diff --git a/ANDROID_3.4.5/include/linux/isdn/hdlc.h b/ANDROID_3.4.5/include/linux/isdn/hdlc.h
deleted file mode 100644
index 96521370..00000000
--- a/ANDROID_3.4.5/include/linux/isdn/hdlc.h
+++ /dev/null
@@ -1,82 +0,0 @@
-/*
- * hdlc.h  --  General purpose ISDN HDLC decoder.
- *
- * Implementation of a HDLC decoder/encoder in software.
- * Necessary because some ISDN devices don't have HDLC
- * controllers.
- *
- * Copyright (C)
- *	2009	Karsten Keil		<keil@b1-systems.de>
- *	2002	Wolfgang Mües		<wolfgang@iksw-muees.de>
- *	2001	Frode Isaksen		<fisaksen@bewan.com>
- *	2001	Kai Germaschewski	<kai.germaschewski@gmx.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ISDNHDLC_H__
-#define __ISDNHDLC_H__
-
-struct isdnhdlc_vars {
-	int bit_shift;
-	int hdlc_bits1;
-	int data_bits;
-	int ffbit_shift;	/* encoding only */
-	int state;
-	int dstpos;
-
-	u16 crc;
-
-	u8 cbin;
-	u8 shift_reg;
-	u8 ffvalue;
-
-	/* set if transferring data */
-	u32 data_received:1;
-	/* set if D channel (send idle instead of flags) */
-	u32 dchannel:1;
-	/* set if 56K adaptation */
-	u32 do_adapt56:1;
-	/* set if in closing phase (need to send CRC + flag) */
-	u32 do_closing:1;
-	/* set if data is bitreverse */
-	u32 do_bitreverse:1;
-};
-
-/* Feature Flags */
-#define HDLC_56KBIT	0x01
-#define HDLC_DCHANNEL	0x02
-#define HDLC_BITREVERSE	0x04
-
-/*
-  The return value from isdnhdlc_decode is
-  the frame length, 0 if no complete frame was decoded,
-  or a negative error number
-*/
-#define HDLC_FRAMING_ERROR     1
-#define HDLC_CRC_ERROR         2
-#define HDLC_LENGTH_ERROR      3
-
-extern void	isdnhdlc_rcv_init(struct isdnhdlc_vars *hdlc, u32 features);
-
-extern int	isdnhdlc_decode(struct isdnhdlc_vars *hdlc, const u8 *src,
-			int slen, int *count, u8 *dst, int dsize);
-
-extern void	isdnhdlc_out_init(struct isdnhdlc_vars *hdlc, u32 features);
-
-extern int	isdnhdlc_encode(struct isdnhdlc_vars *hdlc, const u8 *src,
-			u16 slen, int *count, u8 *dst, int dsize);
-
-#endif /* __ISDNHDLC_H__ */
diff --git a/ANDROID_3.4.5/include/linux/isdn_divertif.h b/ANDROID_3.4.5/include/linux/isdn_divertif.h
deleted file mode 100644
index a5a50f52..00000000
--- a/ANDROID_3.4.5/include/linux/isdn_divertif.h
+++ /dev/null
@@ -1,51 +0,0 @@
-/* $Id: isdn_divertif.h,v 1.4.6.1 2001/09/23 22:25:05 kai Exp $
- *
- * Header for the diversion supplementary interface for i4l.
- *
- * Author    Werner Cornelius (werner@titro.de)
- * Copyright by Werner Cornelius (werner@titro.de)
- *
- * This software may be used and distributed according to the terms
- * of the GNU General Public License, incorporated herein by reference.
- *
- */
-
-#ifndef _LINUX_ISDN_DIVERTIF_H
-#define _LINUX_ISDN_DIVERTIF_H
-
-/***********************************************************/
-/* magic value is also used to control version information */
-/***********************************************************/
-#define DIVERT_IF_MAGIC 0x25873401
-#define DIVERT_CMD_REG  0x00  /* register command */
-#define DIVERT_CMD_REL  0x01  /* release command */
-#define DIVERT_NO_ERR   0x00  /* return value no error */
-#define DIVERT_CMD_ERR  0x01  /* invalid cmd */
-#define DIVERT_VER_ERR  0x02  /* magic/version invalid */
-#define DIVERT_REG_ERR  0x03  /* module already registered */
-#define DIVERT_REL_ERR  0x04  /* module not registered */
-#define DIVERT_REG_NAME isdn_register_divert
-
-#ifdef __KERNEL__
-#include <linux/isdnif.h>
-#include <linux/types.h>
-
-/***************************************************************/
-/* structure exchanging data between isdn hl and divert module */
-/***************************************************************/ 
-typedef struct
-  { ulong if_magic; /* magic info and version */
-    int cmd; /* command */
-    int (*stat_callback)(isdn_ctrl *); /* supplied by divert module when calling */
-    int (*ll_cmd)(isdn_ctrl *); /* supplied by hl on return */
-    char * (*drv_to_name)(int); /* map a driver id to name, supplied by hl */
-    int (*name_to_drv)(char *); /* map a driver id to name, supplied by hl */
-  } isdn_divert_if;
-
-/*********************/
-/* function register */
-/*********************/
-extern int DIVERT_REG_NAME(isdn_divert_if *);
-#endif
-
-#endif /* _LINUX_ISDN_DIVERTIF_H */
diff --git a/ANDROID_3.4.5/include/linux/isdn_ppp.h b/ANDROID_3.4.5/include/linux/isdn_ppp.h
deleted file mode 100644
index 8687a7dc..00000000
--- a/ANDROID_3.4.5/include/linux/isdn_ppp.h
+++ /dev/null
@@ -1,248 +0,0 @@
-/* Linux ISDN subsystem, sync PPP, interface to ipppd
- *
- * Copyright 1994-1999  by Fritz Elfert (fritz@isdn4linux.de)
- * Copyright 1995,96    Thinking Objects Software GmbH Wuerzburg
- * Copyright 1995,96    by Michael Hipp (Michael.Hipp@student.uni-tuebingen.de)
- * Copyright 2000-2002  by Kai Germaschewski (kai@germaschewski.name)
- *
- * This software may be used and distributed according to the terms
- * of the GNU General Public License, incorporated herein by reference.
- *
- */
-
-#ifndef _LINUX_ISDN_PPP_H
-#define _LINUX_ISDN_PPP_H
-
-#define CALLTYPE_INCOMING 0x1
-#define CALLTYPE_OUTGOING 0x2
-#define CALLTYPE_CALLBACK 0x4
-
-#define IPPP_VERSION    "2.2.0"
-
-struct pppcallinfo
-{
-  int calltype;
-  unsigned char local_num[64];
-  unsigned char remote_num[64];
-  int charge_units;
-};
-
-#define PPPIOCGCALLINFO _IOWR('t',128,struct pppcallinfo)
-#define PPPIOCBUNDLE   _IOW('t',129,int)
-#define PPPIOCGMPFLAGS _IOR('t',130,int)
-#define PPPIOCSMPFLAGS _IOW('t',131,int)
-#define PPPIOCSMPMTU   _IOW('t',132,int)
-#define PPPIOCSMPMRU   _IOW('t',133,int)
-#define PPPIOCGCOMPRESSORS _IOR('t',134,unsigned long [8])
-#define PPPIOCSCOMPRESSOR _IOW('t',135,int)
-#define PPPIOCGIFNAME      _IOR('t',136, char [IFNAMSIZ] )
-
-
-#define SC_MP_PROT       0x00000200
-#define SC_REJ_MP_PROT   0x00000400
-#define SC_OUT_SHORT_SEQ 0x00000800
-#define SC_IN_SHORT_SEQ  0x00004000
-
-#define SC_DECOMP_ON		0x01
-#define SC_COMP_ON		0x02
-#define SC_DECOMP_DISCARD	0x04
-#define SC_COMP_DISCARD		0x08
-#define SC_LINK_DECOMP_ON	0x10
-#define SC_LINK_COMP_ON		0x20
-#define SC_LINK_DECOMP_DISCARD	0x40
-#define SC_LINK_COMP_DISCARD	0x80
-
-#define ISDN_PPP_COMP_MAX_OPTIONS 16
-
-#define IPPP_COMP_FLAG_XMIT 0x1
-#define IPPP_COMP_FLAG_LINK 0x2
-
-struct isdn_ppp_comp_data {
-  int num;
-  unsigned char options[ISDN_PPP_COMP_MAX_OPTIONS];
-  int optlen;
-  int flags;
-};
-
-#ifdef __KERNEL__
-
-
-
-#ifdef CONFIG_IPPP_FILTER
-#include <linux/filter.h>
-#endif
-
-#define DECOMP_ERR_NOMEM	(-10)
-
-#define MP_END_FRAG    0x40
-#define MP_BEGIN_FRAG  0x80
-
-#define MP_MAX_QUEUE_LEN	16
-
-/*
- * We need a way for the decompressor to influence the generation of CCP
- * Reset-Requests in a variety of ways. The decompressor is already returning
- * a lot of information (generated skb length, error conditions) so we use
- * another parameter. This parameter is a pointer to a structure which is
- * to be marked valid by the decompressor and only in this case is ever used.
- * Furthermore, the only case where this data is used is when the decom-
- * pressor returns DECOMP_ERROR.
- *
- * We use this same struct for the reset entry of the compressor to commu-
- * nicate to its caller how to deal with sending of a Reset Ack. In this
- * case, expra is not used, but other options still apply (suppressing
- * sending with rsend, appending arbitrary data, etc).
- */
-
-#define IPPP_RESET_MAXDATABYTES	32
-
-struct isdn_ppp_resetparams {
-  unsigned char valid:1;	/* rw Is this structure filled at all ? */
-  unsigned char rsend:1;	/* rw Should we send one at all ? */
-  unsigned char idval:1;	/* rw Is the id field valid ? */
-  unsigned char dtval:1;	/* rw Is the data field valid ? */
-  unsigned char expra:1;	/* rw Is an Ack expected for this Req ? */
-  unsigned char id;		/* wo Send CCP ResetReq with this id */
-  unsigned short maxdlen;	/* ro Max bytes to be stored in data field */
-  unsigned short dlen;		/* rw Bytes stored in data field */
-  unsigned char *data;		/* wo Data for ResetReq info field */
-};
-
-/*
- * this is an 'old friend' from ppp-comp.h under a new name 
- * check the original include for more information
- */
-struct isdn_ppp_compressor {
-  struct isdn_ppp_compressor *next, *prev;
-  struct module *owner;
-  int num; /* CCP compression protocol number */
-  
-  void *(*alloc) (struct isdn_ppp_comp_data *);
-  void (*free) (void *state);
-  int  (*init) (void *state, struct isdn_ppp_comp_data *,
-		int unit,int debug);
-  
-  /* The reset entry needs to get more exact information about the
-     ResetReq or ResetAck it was called with. The parameters are
-     obvious. If reset is called without a Req or Ack frame which
-     could be handed into it, code MUST be set to 0. Using rsparm,
-     the reset entry can control if and how a ResetAck is returned. */
-  
-  void (*reset) (void *state, unsigned char code, unsigned char id,
-		 unsigned char *data, unsigned len,
-		 struct isdn_ppp_resetparams *rsparm);
-  
-  int  (*compress) (void *state, struct sk_buff *in,
-		    struct sk_buff *skb_out, int proto);
-  
-	int  (*decompress) (void *state,struct sk_buff *in,
-			    struct sk_buff *skb_out,
-			    struct isdn_ppp_resetparams *rsparm);
-  
-  void (*incomp) (void *state, struct sk_buff *in,int proto);
-  void (*stat) (void *state, struct compstat *stats);
-};
-
-extern int isdn_ppp_register_compressor(struct isdn_ppp_compressor *);
-extern int isdn_ppp_unregister_compressor(struct isdn_ppp_compressor *);
-extern int isdn_ppp_dial_slave(char *);
-extern int isdn_ppp_hangup_slave(char *);
-
-typedef struct {
-  unsigned long seqerrs;
-  unsigned long frame_drops;
-  unsigned long overflows;
-  unsigned long max_queue_len;
-} isdn_mppp_stats;
-
-typedef struct {
-  int mp_mrru;                        /* unused                             */
-  struct sk_buff * frags;	/* fragments sl list -- use skb->next */
-  long frames;			/* number of frames in the frame list */
-  unsigned int seq;		/* last processed packet seq #: any packets
-  				 * with smaller seq # will be dropped
-				 * unconditionally */
-  spinlock_t lock;
-  int ref_ct;				 
-  /* statistics */
-  isdn_mppp_stats stats;
-} ippp_bundle;
-
-#define NUM_RCV_BUFFS     64
-
-struct ippp_buf_queue {
-  struct ippp_buf_queue *next;
-  struct ippp_buf_queue *last;
-  char *buf;                 /* NULL here indicates end of queue */
-  int len;
-};
-
-/* The data structure for one CCP reset transaction */
-enum ippp_ccp_reset_states {
-  CCPResetIdle,
-  CCPResetSentReq,
-  CCPResetRcvdReq,
-  CCPResetSentAck,
-  CCPResetRcvdAck
-};
-
-struct ippp_ccp_reset_state {
-  enum ippp_ccp_reset_states state;	/* State of this transaction */
-  struct ippp_struct *is;		/* Backlink to device stuff */
-  unsigned char id;			/* Backlink id index */
-  unsigned char ta:1;			/* The timer is active (flag) */
-  unsigned char expra:1;		/* We expect a ResetAck at all */
-  int dlen;				/* Databytes stored in data */
-  struct timer_list timer;		/* For timeouts/retries */
-  /* This is a hack but seems sufficient for the moment. We do not want
-     to have this be yet another allocation for some bytes, it is more
-     memory management overhead than the whole mess is worth. */
-  unsigned char data[IPPP_RESET_MAXDATABYTES];
-};
-
-/* The data structure keeping track of the currently outstanding CCP Reset
-   transactions. */
-struct ippp_ccp_reset {
-  struct ippp_ccp_reset_state *rs[256];	/* One per possible id */
-  unsigned char lastid;			/* Last id allocated by the engine */
-};
-
-struct ippp_struct {
-  struct ippp_struct *next_link;
-  int state;
-  spinlock_t buflock;
-  struct ippp_buf_queue rq[NUM_RCV_BUFFS]; /* packet queue for isdn_ppp_read() */
-  struct ippp_buf_queue *first;  /* pointer to (current) first packet */
-  struct ippp_buf_queue *last;   /* pointer to (current) last used packet in queue */
-  wait_queue_head_t wq;
-  struct task_struct *tk;
-  unsigned int mpppcfg;
-  unsigned int pppcfg;
-  unsigned int mru;
-  unsigned int mpmru;
-  unsigned int mpmtu;
-  unsigned int maxcid;
-  struct isdn_net_local_s *lp;
-  int unit;
-  int minor;
-  unsigned int last_link_seqno;
-  long mp_seqno;
-#ifdef CONFIG_ISDN_PPP_VJ
-  unsigned char *cbuf;
-  struct slcompress *slcomp;
-#endif
-#ifdef CONFIG_IPPP_FILTER
-  struct sock_filter *pass_filter;	/* filter for packets to pass */
-  struct sock_filter *active_filter;	/* filter for pkts to reset idle */
-  unsigned pass_len, active_len;
-#endif
-  unsigned long debug;
-  struct isdn_ppp_compressor *compressor,*decompressor;
-  struct isdn_ppp_compressor *link_compressor,*link_decompressor;
-  void *decomp_stat,*comp_stat,*link_decomp_stat,*link_comp_stat;
-  struct ippp_ccp_reset *reset;	/* Allocated on demand, may never be needed */
-  unsigned long compflags;
-};
-
-#endif /* __KERNEL__ */
-#endif /* _LINUX_ISDN_PPP_H */
diff --git a/ANDROID_3.4.5/include/linux/isdnif.h b/ANDROID_3.4.5/include/linux/isdnif.h
deleted file mode 100644
index b8c23f88..00000000
--- a/ANDROID_3.4.5/include/linux/isdnif.h
+++ /dev/null
@@ -1,546 +0,0 @@
-/* $Id: isdnif.h,v 1.43.2.2 2004/01/12 23:08:35 keil Exp $
- *
- * Linux ISDN subsystem
- * Definition of the interface between the subsystem and its low-level drivers.
- *
- * Copyright 1994,95,96 by Fritz Elfert (fritz@isdn4linux.de)
- * Copyright 1995,96    Thinking Objects Software GmbH Wuerzburg
- * 
- * This software may be used and distributed according to the terms
- * of the GNU General Public License, incorporated herein by reference.
- *
- */
-
-#ifndef __ISDNIF_H__
-#define __ISDNIF_H__
-
-
-/*
- * Values for general protocol-selection
- */
-#define ISDN_PTYPE_UNKNOWN   0   /* Protocol undefined   */
-#define ISDN_PTYPE_1TR6      1   /* german 1TR6-protocol */
-#define ISDN_PTYPE_EURO      2   /* EDSS1-protocol       */
-#define ISDN_PTYPE_LEASED    3   /* for leased lines     */
-#define ISDN_PTYPE_NI1       4   /* US NI-1 protocol     */
-#define ISDN_PTYPE_MAX       7   /* Max. 8 Protocols     */
-
-/*
- * Values for Layer-2-protocol-selection
- */
-#define ISDN_PROTO_L2_X75I   0   /* X75/LAPB with I-Frames            */
-#define ISDN_PROTO_L2_X75UI  1   /* X75/LAPB with UI-Frames           */
-#define ISDN_PROTO_L2_X75BUI 2   /* X75/LAPB with UI-Frames           */
-#define ISDN_PROTO_L2_HDLC   3   /* HDLC                              */
-#define ISDN_PROTO_L2_TRANS  4   /* Transparent (Voice)               */
-#define ISDN_PROTO_L2_X25DTE 5   /* X25/LAPB DTE mode                 */
-#define ISDN_PROTO_L2_X25DCE 6   /* X25/LAPB DCE mode                 */
-#define ISDN_PROTO_L2_V11096 7   /* V.110 bitrate adaption 9600 Baud  */
-#define ISDN_PROTO_L2_V11019 8   /* V.110 bitrate adaption 19200 Baud */
-#define ISDN_PROTO_L2_V11038 9   /* V.110 bitrate adaption 38400 Baud */
-#define ISDN_PROTO_L2_MODEM  10  /* Analog Modem on Board */
-#define ISDN_PROTO_L2_FAX    11  /* Fax Group 2/3         */
-#define ISDN_PROTO_L2_HDLC_56K 12   /* HDLC 56k                          */
-#define ISDN_PROTO_L2_MAX    15  /* Max. 16 Protocols                 */
-
-/*
- * Values for Layer-3-protocol-selection
- */
-#define ISDN_PROTO_L3_TRANS	0	/* Transparent */
-#define ISDN_PROTO_L3_TRANSDSP	1	/* Transparent with DSP */
-#define ISDN_PROTO_L3_FCLASS2	2	/* Fax Group 2/3 CLASS 2 */
-#define ISDN_PROTO_L3_FCLASS1	3	/* Fax Group 2/3 CLASS 1 */
-#define ISDN_PROTO_L3_MAX	7	/* Max. 8 Protocols */
-
-#ifdef __KERNEL__
-
-#include <linux/skbuff.h>
-
-/***************************************************************************/
-/* Extensions made by Werner Cornelius (werner@ikt.de)                     */
-/*                                                                         */ 
-/* The proceed command holds a incoming call in a state to leave processes */
-/* enough time to check whether ist should be accepted.                    */
-/* The PROT_IO Command extends the interface to make protocol dependent    */
-/* features available (call diversion, call waiting...).                   */
-/*                                                                         */ 
-/* The PROT_IO Command is executed with the desired driver id and the arg  */
-/* parameter coded as follows:                                             */
-/* The lower 8 bits of arg contain the desired protocol from ISDN_PTYPE    */
-/* definitions. The upper 24 bits represent the protocol specific cmd/stat.*/
-/* Any additional data is protocol and command specific.                   */
-/* This mechanism also applies to the statcallb callback STAT_PROT.        */    
-/*                                                                         */
-/* This suggested extension permits an easy expansion of protocol specific */
-/* handling. Extensions may be added at any time without changing the HL   */
-/* driver code and not getting conflicts without certifications.           */
-/* The well known CAPI 2.0 interface handles such extensions in a similar  */
-/* way. Perhaps a protocol specific module may be added and separately     */
-/* loaded and linked to the basic isdn module for handling.                */                    
-/***************************************************************************/
-
-/*****************/
-/* DSS1 commands */ 
-/*****************/
-#define DSS1_CMD_INVOKE       ((0x00 << 8) | ISDN_PTYPE_EURO)   /* invoke a supplementary service */
-#define DSS1_CMD_INVOKE_ABORT ((0x01 << 8) | ISDN_PTYPE_EURO)   /* abort a invoke cmd */
-
-/*******************************/
-/* DSS1 Status callback values */
-/*******************************/
-#define DSS1_STAT_INVOKE_RES  ((0x80 << 8) | ISDN_PTYPE_EURO)   /* Result for invocation */
-#define DSS1_STAT_INVOKE_ERR  ((0x81 << 8) | ISDN_PTYPE_EURO)   /* Error Return for invocation */
-#define DSS1_STAT_INVOKE_BRD  ((0x82 << 8) | ISDN_PTYPE_EURO)   /* Deliver invoke broadcast info */
-
-
-/*********************************************************************/
-/* structures for DSS1 commands and callback                         */
-/*                                                                   */
-/* An action is invoked by sending a DSS1_CMD_INVOKE. The ll_id, proc*/
-/* timeout, datalen and data fields must be set before calling.      */
-/*                                                                   */
-/* The return value is a positive hl_id value also delivered in the  */
-/* hl_id field. A value of zero signals no more left hl_id capacitys.*/
-/* A negative return value signals errors in LL. So if the return    */
-/* value is <= 0 no action in LL will be taken -> request ignored    */
-/*                                                                   */
-/* The timeout field must be filled with a positive value specifying */
-/* the amount of time the INVOKED process waits for a reaction from  */
-/* the network.                                                      */
-/* If a response (either error or result) is received during this    */
-/* intervall, a reporting callback is initiated and the process will */
-/* be deleted, the hl identifier will be freed.                      */
-/* If no response is received during the specified intervall, a error*/
-/* callback is initiated with timeout set to -1 and a datalen set    */
-/* to 0.                                                             */
-/* If timeout is set to a value <= 0 during INVOCATION the process is*/
-/* immediately deleted after sending the data. No callback occurs !  */
-/*                                                                   */
-/* A currently waiting process may be aborted with INVOKE_ABORT. No  */
-/* callback will occur when a process has been aborted.              */
-/*                                                                   */
-/* Broadcast invoke frames from the network are reported via the     */
-/* STAT_INVOKE_BRD callback. The ll_id is set to 0, the other fields */
-/* are supplied by the network and not by the HL.                    */   
-/*********************************************************************/
-
-/*****************/
-/* NI1 commands */ 
-/*****************/
-#define NI1_CMD_INVOKE       ((0x00 << 8) | ISDN_PTYPE_NI1)   /* invoke a supplementary service */
-#define NI1_CMD_INVOKE_ABORT ((0x01 << 8) | ISDN_PTYPE_NI1)   /* abort a invoke cmd */
-
-/*******************************/
-/* NI1 Status callback values */
-/*******************************/
-#define NI1_STAT_INVOKE_RES  ((0x80 << 8) | ISDN_PTYPE_NI1)   /* Result for invocation */
-#define NI1_STAT_INVOKE_ERR  ((0x81 << 8) | ISDN_PTYPE_NI1)   /* Error Return for invocation */
-#define NI1_STAT_INVOKE_BRD  ((0x82 << 8) | ISDN_PTYPE_NI1)   /* Deliver invoke broadcast info */
-
-typedef struct
-  { ulong ll_id; /* ID supplied by LL when executing    */
-		 /* a command and returned by HL for    */
-                 /* INVOKE_RES and INVOKE_ERR           */
-    int hl_id;   /* ID supplied by HL when called       */
-                 /* for executing a cmd and delivered   */
-                 /* for results and errors              */
-                 /* must be supplied by LL when aborting*/  
-    int proc;    /* invoke procedure used by CMD_INVOKE */
-                 /* returned by callback and broadcast  */ 
-    int timeout; /* timeout for INVOKE CMD in ms        */
-                 /* -1  in stat callback when timed out */
-                 /* error value when error callback     */
-    int datalen; /* length of cmd or stat data          */
-    u_char *data;/* pointer to data delivered or send   */
-  } isdn_cmd_stat;
-
-/*
- * Commands from linklevel to lowlevel
- *
- */
-#define ISDN_CMD_IOCTL    0       /* Perform ioctl                         */
-#define ISDN_CMD_DIAL     1       /* Dial out                              */
-#define ISDN_CMD_ACCEPTD  2       /* Accept an incoming call on D-Chan.    */
-#define ISDN_CMD_ACCEPTB  3       /* Request B-Channel connect.            */
-#define ISDN_CMD_HANGUP   4       /* Hangup                                */
-#define ISDN_CMD_CLREAZ   5       /* Clear EAZ(s) of channel               */
-#define ISDN_CMD_SETEAZ   6       /* Set EAZ(s) of channel                 */
-#define ISDN_CMD_GETEAZ   7       /* Get EAZ(s) of channel                 */
-#define ISDN_CMD_SETSIL   8       /* Set Service-Indicator-List of channel */
-#define ISDN_CMD_GETSIL   9       /* Get Service-Indicator-List of channel */
-#define ISDN_CMD_SETL2   10       /* Set B-Chan. Layer2-Parameter          */
-#define ISDN_CMD_GETL2   11       /* Get B-Chan. Layer2-Parameter          */
-#define ISDN_CMD_SETL3   12       /* Set B-Chan. Layer3-Parameter          */
-#define ISDN_CMD_GETL3   13       /* Get B-Chan. Layer3-Parameter          */
-// #define ISDN_CMD_LOCK    14       /* Signal usage by upper levels          */
-// #define ISDN_CMD_UNLOCK  15       /* Release usage-lock                    */
-#define ISDN_CMD_SUSPEND 16       /* Suspend connection                    */
-#define ISDN_CMD_RESUME  17       /* Resume connection                     */
-#define ISDN_CMD_PROCEED 18       /* Proceed with call establishment       */
-#define ISDN_CMD_ALERT   19       /* Alert after Proceeding                */
-#define ISDN_CMD_REDIR   20       /* Redir a incoming call                 */
-#define ISDN_CMD_PROT_IO 21       /* Protocol specific commands            */
-#define CAPI_PUT_MESSAGE 22       /* CAPI message send down or up          */
-#define ISDN_CMD_FAXCMD  23       /* FAX commands to HL-driver             */
-#define ISDN_CMD_AUDIO   24       /* DSP, DTMF, ... settings               */
-
-/*
- * Status-Values delivered from lowlevel to linklevel via
- * statcallb().
- *
- */
-#define ISDN_STAT_STAVAIL 256    /* Raw status-data available             */
-#define ISDN_STAT_ICALL   257    /* Incoming call detected                */
-#define ISDN_STAT_RUN     258    /* Signal protocol-code is running       */
-#define ISDN_STAT_STOP    259    /* Signal halt of protocol-code          */
-#define ISDN_STAT_DCONN   260    /* Signal D-Channel connect              */
-#define ISDN_STAT_BCONN   261    /* Signal B-Channel connect              */
-#define ISDN_STAT_DHUP    262    /* Signal D-Channel disconnect           */
-#define ISDN_STAT_BHUP    263    /* Signal B-Channel disconnect           */
-#define ISDN_STAT_CINF    264    /* Charge-Info                           */
-#define ISDN_STAT_LOAD    265    /* Signal new lowlevel-driver is loaded  */
-#define ISDN_STAT_UNLOAD  266    /* Signal unload of lowlevel-driver      */
-#define ISDN_STAT_BSENT   267    /* Signal packet sent                    */
-#define ISDN_STAT_NODCH   268    /* Signal no D-Channel                   */
-#define ISDN_STAT_ADDCH   269    /* Add more Channels                     */
-#define ISDN_STAT_CAUSE   270    /* Cause-Message                         */
-#define ISDN_STAT_ICALLW  271    /* Incoming call without B-chan waiting  */
-#define ISDN_STAT_REDIR   272    /* Redir result                          */
-#define ISDN_STAT_PROT    273    /* protocol IO specific callback         */
-#define ISDN_STAT_DISPLAY 274    /* deliver a received display message    */
-#define ISDN_STAT_L1ERR   275    /* Signal Layer-1 Error                  */
-#define ISDN_STAT_FAXIND  276    /* FAX indications from HL-driver        */
-#define ISDN_STAT_AUDIO   277    /* DTMF, DSP indications                 */
-#define ISDN_STAT_DISCH   278    /* Disable/Enable channel usage          */
-
-/*
- * Audio commands
- */
-#define ISDN_AUDIO_SETDD	0	/* Set DTMF detection           */
-#define ISDN_AUDIO_DTMF		1	/* Rx/Tx DTMF                   */
-
-/*
- * Values for errcode field
- */
-#define ISDN_STAT_L1ERR_SEND 1
-#define ISDN_STAT_L1ERR_RECV 2
-
-/*
- * Values for feature-field of interface-struct.
- */
-/* Layer 2 */
-#define ISDN_FEATURE_L2_X75I    (0x0001 << ISDN_PROTO_L2_X75I)
-#define ISDN_FEATURE_L2_X75UI   (0x0001 << ISDN_PROTO_L2_X75UI)
-#define ISDN_FEATURE_L2_X75BUI  (0x0001 << ISDN_PROTO_L2_X75BUI)
-#define ISDN_FEATURE_L2_HDLC    (0x0001 << ISDN_PROTO_L2_HDLC)
-#define ISDN_FEATURE_L2_TRANS   (0x0001 << ISDN_PROTO_L2_TRANS)
-#define ISDN_FEATURE_L2_X25DTE  (0x0001 << ISDN_PROTO_L2_X25DTE)
-#define ISDN_FEATURE_L2_X25DCE  (0x0001 << ISDN_PROTO_L2_X25DCE)
-#define ISDN_FEATURE_L2_V11096  (0x0001 << ISDN_PROTO_L2_V11096)
-#define ISDN_FEATURE_L2_V11019  (0x0001 << ISDN_PROTO_L2_V11019)
-#define ISDN_FEATURE_L2_V11038  (0x0001 << ISDN_PROTO_L2_V11038)
-#define ISDN_FEATURE_L2_MODEM   (0x0001 << ISDN_PROTO_L2_MODEM)
-#define ISDN_FEATURE_L2_FAX	(0x0001 << ISDN_PROTO_L2_FAX)
-#define ISDN_FEATURE_L2_HDLC_56K (0x0001 << ISDN_PROTO_L2_HDLC_56K)
-
-#define ISDN_FEATURE_L2_MASK    (0x0FFFF) /* Max. 16 protocols */
-#define ISDN_FEATURE_L2_SHIFT   (0)
-
-/* Layer 3 */
-#define ISDN_FEATURE_L3_TRANS   (0x10000 << ISDN_PROTO_L3_TRANS)
-#define ISDN_FEATURE_L3_TRANSDSP (0x10000 << ISDN_PROTO_L3_TRANSDSP)
-#define ISDN_FEATURE_L3_FCLASS2	(0x10000 << ISDN_PROTO_L3_FCLASS2)
-#define ISDN_FEATURE_L3_FCLASS1	(0x10000 << ISDN_PROTO_L3_FCLASS1)
-
-#define ISDN_FEATURE_L3_MASK    (0x0FF0000) /* Max. 8 Protocols */
-#define ISDN_FEATURE_L3_SHIFT   (16)
-
-/* Signaling */
-#define ISDN_FEATURE_P_UNKNOWN  (0x1000000 << ISDN_PTYPE_UNKNOWN)
-#define ISDN_FEATURE_P_1TR6     (0x1000000 << ISDN_PTYPE_1TR6)
-#define ISDN_FEATURE_P_EURO     (0x1000000 << ISDN_PTYPE_EURO)
-#define ISDN_FEATURE_P_NI1      (0x1000000 << ISDN_PTYPE_NI1)
-
-#define ISDN_FEATURE_P_MASK     (0x0FF000000) /* Max. 8 Protocols */
-#define ISDN_FEATURE_P_SHIFT    (24)
-
-typedef struct setup_parm {
-    unsigned char phone[32];	/* Remote Phone-Number */
-    unsigned char eazmsn[32];	/* Local EAZ or MSN    */
-    unsigned char si1;      /* Service Indicator 1 */
-    unsigned char si2;      /* Service Indicator 2 */
-    unsigned char plan;     /* Numbering plan      */
-    unsigned char screen;   /* Screening info      */
-} setup_parm;
-
-
-#ifdef CONFIG_ISDN_TTY_FAX
-/* T.30 Fax G3 */
-
-#define FAXIDLEN 21
-
-typedef struct T30_s {
-	/* session parameters */
-	__u8 resolution;
-	__u8 rate;
-	__u8 width;
-	__u8 length;
-	__u8 compression;
-	__u8 ecm;
-	__u8 binary;
-	__u8 scantime;
-	__u8 id[FAXIDLEN];
-	/* additional parameters */
-	__u8 phase;
-	__u8 direction;
-	__u8 code;
-	__u8 badlin;
-	__u8 badmul;
-	__u8 bor;
-	__u8 fet;
-	__u8 pollid[FAXIDLEN];
-	__u8 cq;
-	__u8 cr;
-	__u8 ctcrty;
-	__u8 minsp;
-	__u8 phcto;
-	__u8 rel;
-	__u8 nbc;
-	/* remote station parameters */
-	__u8 r_resolution;
-	__u8 r_rate;
-	__u8 r_width;
-	__u8 r_length;
-	__u8 r_compression;
-	__u8 r_ecm;
-	__u8 r_binary;
-	__u8 r_scantime;
-	__u8 r_id[FAXIDLEN];
-	__u8 r_code;
-} __packed T30_s;
-
-#define ISDN_TTY_FAX_CONN_IN	0
-#define ISDN_TTY_FAX_CONN_OUT	1
-
-#define ISDN_TTY_FAX_FCON	0
-#define ISDN_TTY_FAX_DIS 	1
-#define ISDN_TTY_FAX_FTT 	2
-#define ISDN_TTY_FAX_MCF 	3
-#define ISDN_TTY_FAX_DCS 	4
-#define ISDN_TTY_FAX_TRAIN_OK	5
-#define ISDN_TTY_FAX_EOP 	6
-#define ISDN_TTY_FAX_EOM 	7
-#define ISDN_TTY_FAX_MPS 	8
-#define ISDN_TTY_FAX_DTC 	9
-#define ISDN_TTY_FAX_RID 	10
-#define ISDN_TTY_FAX_HNG 	11
-#define ISDN_TTY_FAX_DT  	12
-#define ISDN_TTY_FAX_FCON_I	13
-#define ISDN_TTY_FAX_DR  	14
-#define ISDN_TTY_FAX_ET  	15
-#define ISDN_TTY_FAX_CFR 	16
-#define ISDN_TTY_FAX_PTS 	17
-#define ISDN_TTY_FAX_SENT	18
-
-#define ISDN_FAX_PHASE_IDLE	0
-#define ISDN_FAX_PHASE_A	1
-#define ISDN_FAX_PHASE_B   	2
-#define ISDN_FAX_PHASE_C   	3
-#define ISDN_FAX_PHASE_D   	4
-#define ISDN_FAX_PHASE_E   	5
-
-#endif /* TTY_FAX */
-
-#define ISDN_FAX_CLASS1_FAE	0
-#define ISDN_FAX_CLASS1_FTS	1
-#define ISDN_FAX_CLASS1_FRS	2
-#define ISDN_FAX_CLASS1_FTM	3
-#define ISDN_FAX_CLASS1_FRM	4
-#define ISDN_FAX_CLASS1_FTH	5
-#define ISDN_FAX_CLASS1_FRH	6
-#define ISDN_FAX_CLASS1_CTRL	7
-
-#define ISDN_FAX_CLASS1_OK	0
-#define ISDN_FAX_CLASS1_CONNECT	1
-#define ISDN_FAX_CLASS1_NOCARR	2
-#define ISDN_FAX_CLASS1_ERROR	3
-#define ISDN_FAX_CLASS1_FCERROR	4
-#define ISDN_FAX_CLASS1_QUERY	5
-
-typedef struct {
-	__u8	cmd;
-	__u8	subcmd;
-	__u8	para[50];
-} aux_s;
-
-#define AT_COMMAND	0
-#define AT_EQ_VALUE	1
-#define AT_QUERY	2
-#define AT_EQ_QUERY	3
-
-/* CAPI structs */
-
-/* this is compatible to the old union size */
-#define MAX_CAPI_PARA_LEN 50
-
-typedef struct {
-	/* Header */
-	__u16 Length;
-	__u16 ApplId;
-	__u8 Command;
-	__u8 Subcommand;
-	__u16 Messagenumber;
-
-	/* Parameter */
-	union {
-		__u32 Controller;
-		__u32 PLCI;
-		__u32 NCCI;
-	} adr;
-	__u8 para[MAX_CAPI_PARA_LEN];
-} capi_msg;
-
-/*
- * Structure for exchanging above infos
- *
- */
-typedef struct {
-	int   driver;		/* Lowlevel-Driver-ID            */
-	int   command;		/* Command or Status (see above) */
-	ulong arg;		/* Additional Data               */
-	union {
-		ulong errcode;	/* Type of error with STAT_L1ERR	*/
-		int length;	/* Amount of bytes sent with STAT_BSENT	*/
-		u_char num[50];	/* Additional Data			*/
-		setup_parm setup;/* For SETUP msg			*/
-		capi_msg cmsg;	/* For CAPI like messages		*/
-		char display[85];/* display message data		*/ 
-		isdn_cmd_stat isdn_io; /* ISDN IO-parameter/result	*/
-		aux_s aux;	/* for modem commands/indications	*/
-#ifdef CONFIG_ISDN_TTY_FAX
-		T30_s	*fax;	/* Pointer to ttys fax struct		*/
-#endif
-		ulong userdata;	/* User Data */
-	} parm;
-} isdn_ctrl;
-
-#define dss1_io    isdn_io
-#define ni1_io     isdn_io
-
-/*
- * The interface-struct itself (initialized at load-time of lowlevel-driver)
- *
- * See Documentation/isdn/INTERFACE for a description, how the communication
- * between the ISDN subsystem and its drivers is done.
- *
- */
-typedef struct {
-  struct module *owner;
-
-  /* Number of channels supported by this driver
-   */
-  int channels;
-
-  /* 
-   * Maximum Size of transmit/receive-buffer this driver supports.
-   */
-  int maxbufsize;
-
-  /* Feature-Flags for this driver.
-   * See defines ISDN_FEATURE_... for Values
-   */
-  unsigned long features;
-
-  /*
-   * Needed for calculating
-   * dev->hard_header_len = linklayer header + hl_hdrlen;
-   * Drivers, not supporting sk_buff's should set this to 0.
-   */
-  unsigned short hl_hdrlen;
-
-  /*
-   * Receive-Callback using sk_buff's
-   * Parameters:
-   *             int                    Driver-ID
-   *             int                    local channel-number (0 ...)
-   *             struct sk_buff *skb    received Data
-   */
-  void (*rcvcallb_skb)(int, int, struct sk_buff *);
-
-  /* Status-Callback
-   * Parameters:
-   *             isdn_ctrl*
-   *                   driver  = Driver ID.
-   *                   command = One of above ISDN_STAT_... constants.
-   *                   arg     = depending on status-type.
-   *                   num     = depending on status-type.
-   */
-  int (*statcallb)(isdn_ctrl*);
-
-  /* Send command
-   * Parameters:
-   *             isdn_ctrl*
-   *                   driver  = Driver ID.
-   *                   command = One of above ISDN_CMD_... constants.
-   *                   arg     = depending on command.
-   *                   num     = depending on command.
-   */
-  int (*command)(isdn_ctrl*);
-
-  /*
-   * Send data using sk_buff's
-   * Parameters:
-   *             int                    driverId
-   *             int                    local channel-number (0...)
-   *             int                    Flag: Need ACK for this packet.
-   *             struct sk_buff *skb    Data to send
-   */
-  int (*writebuf_skb) (int, int, int, struct sk_buff *);
-
-  /* Send raw D-Channel-Commands
-   * Parameters:
-   *             u_char pointer data
-   *             int    length of data
-   *             int    driverId
-   *             int    local channel-number (0 ...)
-   */
-  int (*writecmd)(const u_char __user *, int, int, int);
-
-  /* Read raw Status replies
-   *             u_char pointer data (volatile)
-   *             int    length of buffer
-   *             int    driverId
-   *             int    local channel-number (0 ...)
-   */
-  int (*readstat)(u_char __user *, int, int, int);
-
-  char id[20];
-} isdn_if;
-
-/*
- * Function which must be called by lowlevel-driver at loadtime with
- * the following fields of above struct set:
- *
- * channels     Number of channels that will be supported.
- * hl_hdrlen    Space to preserve in sk_buff's when sending. Drivers, not
- *              supporting sk_buff's should set this to 0.
- * command      Address of Command-Handler.
- * features     Bitwise coded Features of this driver. (use ISDN_FEATURE_...)
- * writebuf_skb Address of Skbuff-Send-Handler.
- * writecmd        "    "  D-Channel  " which accepts raw D-Ch-Commands.
- * readstat        "    "  D-Channel  " which delivers raw Status-Data.
- *
- * The linklevel-driver fills the following fields:
- *
- * channels      Driver-ID assigned to this driver. (Must be used on all
- *               subsequent callbacks.
- * rcvcallb_skb  Address of handler for received Skbuff's.
- * statcallb        "    "     "    for status-changes.
- *
- */
-extern int register_isdn(isdn_if*);
-#include <asm/uaccess.h>
-
-#endif /* __KERNEL__ */
-
-#endif /* __ISDNIF_H__ */
diff --git a/ANDROID_3.4.5/include/linux/isicom.h b/ANDROID_3.4.5/include/linux/isicom.h
deleted file mode 100644
index b92e0565..00000000
--- a/ANDROID_3.4.5/include/linux/isicom.h
+++ /dev/null
@@ -1,84 +0,0 @@
-#ifndef _LINUX_ISICOM_H
-#define _LINUX_ISICOM_H
-
-#define		YES	1
-#define		NO	0
-
-/*
- *  ISICOM Driver definitions ...
- *
- */
-
-#define		ISICOM_NAME	"ISICom"
-
-/*
- *      PCI definitions
- */
-
-#define		DEVID_COUNT	9
-#define		VENDOR_ID	0x10b5
-
-/*
- *	These are now officially allocated numbers
- */
-
-#define		ISICOM_NMAJOR	112	/* normal  */
-#define		ISICOM_CMAJOR	113	/* callout */
-#define		ISICOM_MAGIC	(('M' << 8) | 'T')
-
-#define		WAKEUP_CHARS	256	/* hard coded for now	*/
-#define		TX_SIZE		254
-
-#define		BOARD_COUNT	4
-#define		PORT_COUNT	(BOARD_COUNT*16)
-
-/*   character sizes  */
-
-#define		ISICOM_CS5		0x0000
-#define		ISICOM_CS6		0x0001
-#define		ISICOM_CS7		0x0002
-#define		ISICOM_CS8		0x0003
-
-/* stop bits */
-
-#define		ISICOM_1SB		0x0000
-#define		ISICOM_2SB		0x0004
-
-/* parity */
-
-#define		ISICOM_NOPAR		0x0000
-#define		ISICOM_ODPAR		0x0008
-#define		ISICOM_EVPAR		0x0018
-
-/* flow control */
-
-#define		ISICOM_CTSRTS		0x03
-#define		ISICOM_INITIATE_XONXOFF	0x04
-#define		ISICOM_RESPOND_XONXOFF	0x08
-
-#define	BOARD(line)  (((line) >> 4) & 0x3)
-
-	/*	isi kill queue bitmap	*/
-
-#define		ISICOM_KILLTX		0x01
-#define		ISICOM_KILLRX		0x02
-
-	/* isi_board status bitmap */
-
-#define		FIRMWARE_LOADED		0x0001
-#define		BOARD_ACTIVE		0x0002
-#define		BOARD_INIT		0x0004
-
- 	/* isi_port status bitmap  */
-
-#define		ISI_CTS			0x1000
-#define		ISI_DSR			0x2000
-#define		ISI_RI			0x4000
-#define		ISI_DCD			0x8000
-#define		ISI_DTR			0x0100
-#define		ISI_RTS			0x0200
-
-
-#define		ISI_TXOK		0x0001
-
-#endif	/*	ISICOM_H	*/
diff --git a/ANDROID_3.4.5/include/linux/iso_fs.h b/ANDROID_3.4.5/include/linux/iso_fs.h
deleted file mode 100644
index 4688ac42..00000000
--- a/ANDROID_3.4.5/include/linux/iso_fs.h
+++ /dev/null
@@ -1,165 +0,0 @@
-#ifndef _ISOFS_FS_H
-#define _ISOFS_FS_H
-
-#include <linux/types.h>
-#include <linux/magic.h>
-
-/*
- * The isofs filesystem constants/structures
- */
-
-/* This part borrowed from the bsd386 isofs */
-#define ISODCL(from, to) (to - from + 1)
-
-struct iso_volume_descriptor {
-	char type[ISODCL(1,1)]; /* 711 */
-	char id[ISODCL(2,6)];
-	char version[ISODCL(7,7)];
-	char data[ISODCL(8,2048)];
-};
-
-/* volume descriptor types */
-#define ISO_VD_PRIMARY 1
-#define ISO_VD_SUPPLEMENTARY 2
-#define ISO_VD_END 255
-
-#define ISO_STANDARD_ID "CD001"
-
-struct iso_primary_descriptor {
-	char type			[ISODCL (  1,   1)]; /* 711 */
-	char id				[ISODCL (  2,   6)];
-	char version			[ISODCL (  7,   7)]; /* 711 */
-	char unused1			[ISODCL (  8,   8)];
-	char system_id			[ISODCL (  9,  40)]; /* achars */
-	char volume_id			[ISODCL ( 41,  72)]; /* dchars */
-	char unused2			[ISODCL ( 73,  80)];
-	char volume_space_size		[ISODCL ( 81,  88)]; /* 733 */
-	char unused3			[ISODCL ( 89, 120)];
-	char volume_set_size		[ISODCL (121, 124)]; /* 723 */
-	char volume_sequence_number	[ISODCL (125, 128)]; /* 723 */
-	char logical_block_size		[ISODCL (129, 132)]; /* 723 */
-	char path_table_size		[ISODCL (133, 140)]; /* 733 */
-	char type_l_path_table		[ISODCL (141, 144)]; /* 731 */
-	char opt_type_l_path_table	[ISODCL (145, 148)]; /* 731 */
-	char type_m_path_table		[ISODCL (149, 152)]; /* 732 */
-	char opt_type_m_path_table	[ISODCL (153, 156)]; /* 732 */
-	char root_directory_record	[ISODCL (157, 190)]; /* 9.1 */
-	char volume_set_id		[ISODCL (191, 318)]; /* dchars */
-	char publisher_id		[ISODCL (319, 446)]; /* achars */
-	char preparer_id		[ISODCL (447, 574)]; /* achars */
-	char application_id		[ISODCL (575, 702)]; /* achars */
-	char copyright_file_id		[ISODCL (703, 739)]; /* 7.5 dchars */
-	char abstract_file_id		[ISODCL (740, 776)]; /* 7.5 dchars */
-	char bibliographic_file_id	[ISODCL (777, 813)]; /* 7.5 dchars */
-	char creation_date		[ISODCL (814, 830)]; /* 8.4.26.1 */
-	char modification_date		[ISODCL (831, 847)]; /* 8.4.26.1 */
-	char expiration_date		[ISODCL (848, 864)]; /* 8.4.26.1 */
-	char effective_date		[ISODCL (865, 881)]; /* 8.4.26.1 */
-	char file_structure_version	[ISODCL (882, 882)]; /* 711 */
-	char unused4			[ISODCL (883, 883)];
-	char application_data		[ISODCL (884, 1395)];
-	char unused5			[ISODCL (1396, 2048)];
-};
-
-/* Almost the same as the primary descriptor but two fields are specified */
-struct iso_supplementary_descriptor {
-	char type			[ISODCL (  1,   1)]; /* 711 */
-	char id				[ISODCL (  2,   6)];
-	char version			[ISODCL (  7,   7)]; /* 711 */
-	char flags			[ISODCL (  8,   8)]; /* 853 */
-	char system_id			[ISODCL (  9,  40)]; /* achars */
-	char volume_id			[ISODCL ( 41,  72)]; /* dchars */
-	char unused2			[ISODCL ( 73,  80)];
-	char volume_space_size		[ISODCL ( 81,  88)]; /* 733 */
-	char escape			[ISODCL ( 89, 120)]; /* 856 */
-	char volume_set_size		[ISODCL (121, 124)]; /* 723 */
-	char volume_sequence_number	[ISODCL (125, 128)]; /* 723 */
-	char logical_block_size		[ISODCL (129, 132)]; /* 723 */
-	char path_table_size		[ISODCL (133, 140)]; /* 733 */
-	char type_l_path_table		[ISODCL (141, 144)]; /* 731 */
-	char opt_type_l_path_table	[ISODCL (145, 148)]; /* 731 */
-	char type_m_path_table		[ISODCL (149, 152)]; /* 732 */
-	char opt_type_m_path_table	[ISODCL (153, 156)]; /* 732 */
-	char root_directory_record	[ISODCL (157, 190)]; /* 9.1 */
-	char volume_set_id		[ISODCL (191, 318)]; /* dchars */
-	char publisher_id		[ISODCL (319, 446)]; /* achars */
-	char preparer_id		[ISODCL (447, 574)]; /* achars */
-	char application_id		[ISODCL (575, 702)]; /* achars */
-	char copyright_file_id		[ISODCL (703, 739)]; /* 7.5 dchars */
-	char abstract_file_id		[ISODCL (740, 776)]; /* 7.5 dchars */
-	char bibliographic_file_id	[ISODCL (777, 813)]; /* 7.5 dchars */
-	char creation_date		[ISODCL (814, 830)]; /* 8.4.26.1 */
-	char modification_date		[ISODCL (831, 847)]; /* 8.4.26.1 */
-	char expiration_date		[ISODCL (848, 864)]; /* 8.4.26.1 */
-	char effective_date		[ISODCL (865, 881)]; /* 8.4.26.1 */
-	char file_structure_version	[ISODCL (882, 882)]; /* 711 */
-	char unused4			[ISODCL (883, 883)];
-	char application_data		[ISODCL (884, 1395)];
-	char unused5			[ISODCL (1396, 2048)];
-};
-
-
-#define HS_STANDARD_ID "CDROM"
-
-struct  hs_volume_descriptor {
-	char foo			[ISODCL (  1,   8)]; /* 733 */
-	char type			[ISODCL (  9,   9)]; /* 711 */
-	char id				[ISODCL ( 10,  14)];
-	char version			[ISODCL ( 15,  15)]; /* 711 */
-	char data[ISODCL(16,2048)];
-};
-
-
-struct hs_primary_descriptor {
-	char foo			[ISODCL (  1,   8)]; /* 733 */
-	char type			[ISODCL (  9,   9)]; /* 711 */
-	char id				[ISODCL ( 10,  14)];
-	char version			[ISODCL ( 15,  15)]; /* 711 */
-	char unused1			[ISODCL ( 16,  16)]; /* 711 */
-	char system_id			[ISODCL ( 17,  48)]; /* achars */
-	char volume_id			[ISODCL ( 49,  80)]; /* dchars */
-	char unused2			[ISODCL ( 81,  88)]; /* 733 */
-	char volume_space_size		[ISODCL ( 89,  96)]; /* 733 */
-	char unused3			[ISODCL ( 97, 128)]; /* 733 */
-	char volume_set_size		[ISODCL (129, 132)]; /* 723 */
-	char volume_sequence_number	[ISODCL (133, 136)]; /* 723 */
-	char logical_block_size		[ISODCL (137, 140)]; /* 723 */
-	char path_table_size		[ISODCL (141, 148)]; /* 733 */
-	char type_l_path_table		[ISODCL (149, 152)]; /* 731 */
-	char unused4			[ISODCL (153, 180)]; /* 733 */
-	char root_directory_record	[ISODCL (181, 214)]; /* 9.1 */
-};
-
-/* We use this to help us look up the parent inode numbers. */
-
-struct iso_path_table{
-	unsigned char  name_len[2];	/* 721 */
-	char extent[4];		/* 731 */
-	char  parent[2];	/* 721 */
-	char name[0];
-} __attribute__((packed));
-
-/* high sierra is identical to iso, except that the date is only 6 bytes, and
-   there is an extra reserved byte after the flags */
-
-struct iso_directory_record {
-	char length			[ISODCL (1, 1)]; /* 711 */
-	char ext_attr_length		[ISODCL (2, 2)]; /* 711 */
-	char extent			[ISODCL (3, 10)]; /* 733 */
-	char size			[ISODCL (11, 18)]; /* 733 */
-	char date			[ISODCL (19, 25)]; /* 7 by 711 */
-	char flags			[ISODCL (26, 26)];
-	char file_unit_size		[ISODCL (27, 27)]; /* 711 */
-	char interleave			[ISODCL (28, 28)]; /* 711 */
-	char volume_sequence_number	[ISODCL (29, 32)]; /* 723 */
-	unsigned char name_len		[ISODCL (33, 33)]; /* 711 */
-	char name			[0];
-} __attribute__((packed));
-
-#define ISOFS_BLOCK_BITS 11
-#define ISOFS_BLOCK_SIZE 2048
-
-#define ISOFS_BUFFER_SIZE(INODE) ((INODE)->i_sb->s_blocksize)
-#define ISOFS_BUFFER_BITS(INODE) ((INODE)->i_sb->s_blocksize_bits)
-
-#endif /* _ISOFS_FS_H */
diff --git a/ANDROID_3.4.5/include/linux/istallion.h b/ANDROID_3.4.5/include/linux/istallion.h
deleted file mode 100644
index ad700a60..00000000
--- a/ANDROID_3.4.5/include/linux/istallion.h
+++ /dev/null
@@ -1,123 +0,0 @@
-/*****************************************************************************/
-
-/*
- *	istallion.h  -- stallion intelligent multiport serial driver.
- *
- *	Copyright (C) 1996-1998  Stallion Technologies
- *	Copyright (C) 1994-1996  Greg Ungerer.
- *
- *	This program is free software; you can redistribute it and/or modify
- *	it under the terms of the GNU General Public License as published by
- *	the Free Software Foundation; either version 2 of the License, or
- *	(at your option) any later version.
- *
- *	This program is distributed in the hope that it will be useful,
- *	but WITHOUT ANY WARRANTY; without even the implied warranty of
- *	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *	GNU General Public License for more details.
- *
- *	You should have received a copy of the GNU General Public License
- *	along with this program; if not, write to the Free Software
- *	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-/*****************************************************************************/
-#ifndef	_ISTALLION_H
-#define	_ISTALLION_H
-/*****************************************************************************/
-
-/*
- *	Define important driver constants here.
- */
-#define	STL_MAXBRDS		4
-#define	STL_MAXPANELS		4
-#define	STL_MAXPORTS		64
-#define	STL_MAXCHANS		(STL_MAXPORTS + 1)
-#define	STL_MAXDEVS		(STL_MAXBRDS * STL_MAXPORTS)
-
-
-/*
- *	Define a set of structures to hold all the board/panel/port info
- *	for our ports. These will be dynamically allocated as required at
- *	driver initialization time.
- */
-
-/*
- *	Port and board structures to hold status info about each object.
- *	The board structure contains pointers to structures for each port
- *	connected to it. Panels are not distinguished here, since
- *	communication with the slave board will always be on a per port
- *	basis.
- */
-struct stliport {
-	unsigned long		magic;
-	struct tty_port		port;
-	unsigned int		portnr;
-	unsigned int		panelnr;
-	unsigned int		brdnr;
-	unsigned long		state;
-	unsigned int		devnr;
-	int			baud_base;
-	int			custom_divisor;
-	int			closing_wait;
-	int			rc;
-	int			argsize;
-	void			*argp;
-	unsigned int		rxmarkmsk;
-	wait_queue_head_t	raw_wait;
-	struct asysigs		asig;
-	unsigned long		addr;
-	unsigned long		rxoffset;
-	unsigned long		txoffset;
-	unsigned long		sigs;
-	unsigned long		pflag;
-	unsigned int		rxsize;
-	unsigned int		txsize;
-	unsigned char		reqbit;
-	unsigned char		portidx;
-	unsigned char		portbit;
-};
-
-/*
- *	Use a structure of function pointers to do board level operations.
- *	These include, enable/disable, paging shared memory, interrupting, etc.
- */
-struct stlibrd {
-	unsigned long	magic;
-	unsigned int	brdnr;
-	unsigned int	brdtype;
-	unsigned long	state;
-	unsigned int	nrpanels;
-	unsigned int	nrports;
-	unsigned int	nrdevs;
-	unsigned int	iobase;
-	int		iosize;
-	unsigned long	memaddr;
-	void		__iomem *membase;
-	unsigned long	memsize;
-	int		pagesize;
-	int		hostoffset;
-	int		slaveoffset;
-	int		bitsize;
-	int		enabval;
-	unsigned int	panels[STL_MAXPANELS];
-	int		panelids[STL_MAXPANELS];
-	void		(*init)(struct stlibrd *brdp);
-	void		(*enable)(struct stlibrd *brdp);
-	void		(*reenable)(struct stlibrd *brdp);
-	void		(*disable)(struct stlibrd *brdp);
-	void		__iomem *(*getmemptr)(struct stlibrd *brdp, unsigned long offset, int line);
-	void		(*intr)(struct stlibrd *brdp);
-	void		(*reset)(struct stlibrd *brdp);
-	struct stliport	*ports[STL_MAXPORTS];
-};
-
-
-/*
- *	Define MAGIC numbers used for above structures.
- */
-#define	STLI_PORTMAGIC	0xe671c7a1
-#define	STLI_BOARDMAGIC	0x4bc6c825
-
-/*****************************************************************************/
-#endif
diff --git a/ANDROID_3.4.5/include/linux/ivtv.h b/ANDROID_3.4.5/include/linux/ivtv.h
deleted file mode 100644
index 42bf7257..00000000
--- a/ANDROID_3.4.5/include/linux/ivtv.h
+++ /dev/null
@@ -1,73 +0,0 @@
-/*
-    Public ivtv API header
-    Copyright (C) 2003-2004  Kevin Thayer <nufan_wfk at yahoo.com>
-    Copyright (C) 2004-2007  Hans Verkuil <hverkuil@xs4all.nl>
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __LINUX_IVTV_H__
-#define __LINUX_IVTV_H__
-
-#include <linux/compiler.h>
-#include <linux/types.h>
-#include <linux/videodev2.h>
-
-/* ivtv knows several distinct output modes: MPEG streaming,
-   YUV streaming, YUV updates through user DMA and the passthrough
-   mode.
-
-   In order to clearly tell the driver that we are in user DMA
-   YUV mode you need to call IVTV_IOC_DMA_FRAME with y_source == NULL
-   first (althrough if you don't then the first time
-   DMA_FRAME is called the mode switch is done automatically).
-
-   When you close the file handle the user DMA mode is exited again.
-
-   While in one mode, you cannot use another mode (EBUSY is returned).
-
-   All this means that if you want to change the YUV interlacing
-   for the user DMA YUV mode you first need to do call IVTV_IOC_DMA_FRAME
-   with y_source == NULL before you can set the correct format using
-   VIDIOC_S_FMT.
-
-   Eventually all this should be replaced with a proper V4L2 API,
-   but for now we have to do it this way. */
-
-struct ivtv_dma_frame {
-	enum v4l2_buf_type type; /* V4L2_BUF_TYPE_VIDEO_OUTPUT */
-	__u32 pixelformat;	 /* 0 == same as destination */
-	void __user *y_source;   /* if NULL and type == V4L2_BUF_TYPE_VIDEO_OUTPUT,
-				    then just switch to user DMA YUV output mode */
-	void __user *uv_source;  /* Unused for RGB pixelformats */
-	struct v4l2_rect src;
-	struct v4l2_rect dst;
-	__u32 src_width;
-	__u32 src_height;
-};
-
-#define IVTV_IOC_DMA_FRAME		_IOW ('V', BASE_VIDIOC_PRIVATE+0, struct ivtv_dma_frame)
-
-/* Select the passthrough mode (if the argument is non-zero). In the passthrough
-   mode the output of the encoder is passed immediately into the decoder. */
-#define IVTV_IOC_PASSTHROUGH_MODE	_IOW ('V', BASE_VIDIOC_PRIVATE+1, int)
-
-/* Deprecated defines: applications should use the defines from videodev2.h */
-#define IVTV_SLICED_TYPE_TELETEXT_B     V4L2_MPEG_VBI_IVTV_TELETEXT_B
-#define IVTV_SLICED_TYPE_CAPTION_525    V4L2_MPEG_VBI_IVTV_CAPTION_525
-#define IVTV_SLICED_TYPE_WSS_625        V4L2_MPEG_VBI_IVTV_WSS_625
-#define IVTV_SLICED_TYPE_VPS            V4L2_MPEG_VBI_IVTV_VPS
-
-#endif /* _LINUX_IVTV_H */
diff --git a/ANDROID_3.4.5/include/linux/ivtvfb.h b/ANDROID_3.4.5/include/linux/ivtvfb.h
deleted file mode 100644
index e8b92f67..00000000
--- a/ANDROID_3.4.5/include/linux/ivtvfb.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
-    On Screen Display cx23415 Framebuffer driver
-
-    Copyright (C) 2006, 2007  Ian Armstrong <ian@iarmst.demon.co.uk>
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __LINUX_IVTVFB_H__
-#define __LINUX_IVTVFB_H__
-
-#include <linux/compiler.h>
-#include <linux/types.h>
-
-/* Framebuffer external API */
-
-struct ivtvfb_dma_frame {
-	void __user *source;
-	unsigned long dest_offset;
-	int count;
-};
-
-#define IVTVFB_IOC_DMA_FRAME 	_IOW('V', BASE_VIDIOC_PRIVATE+0, struct ivtvfb_dma_frame)
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/ixjuser.h b/ANDROID_3.4.5/include/linux/ixjuser.h
deleted file mode 100644
index 94ab5e94..00000000
--- a/ANDROID_3.4.5/include/linux/ixjuser.h
+++ /dev/null
@@ -1,720 +0,0 @@
-#ifndef __LINUX_IXJUSER_H
-#define __LINUX_IXJUSER_H
-
-/******************************************************************************
- *
- *    ixjuser.h
- *
- * Device Driver for Quicknet Technologies, Inc.'s Telephony cards
- * including the Internet PhoneJACK, Internet PhoneJACK Lite,
- * Internet PhoneJACK PCI, Internet LineJACK, Internet PhoneCARD and
- * SmartCABLE
- *
- *    (c) Copyright 1999-2001  Quicknet Technologies, Inc.
- *
- *    This program is free software; you can redistribute it and/or
- *    modify it under the terms of the GNU General Public License
- *    as published by the Free Software Foundation; either version
- *    2 of the License, or (at your option) any later version.
- *
- * Author:          Ed Okerson, <eokerson@quicknet.net>
- *    
- * Contributors:    Greg Herlein, <gherlein@quicknet.net>
- *                  David W. Erhart, <derhart@quicknet.net>
- *                  John Sellers, <jsellers@quicknet.net>
- *                  Mike Preston, <mpreston@quicknet.net>
- *
- * More information about the hardware related to this driver can be found
- * at our website:    http://www.quicknet.net
- *
- * Fixes:
- *
- * IN NO EVENT SHALL QUICKNET TECHNOLOGIES, INC. BE LIABLE TO ANY PARTY FOR
- * DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING OUT
- * OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN IF QUICKNET
- * TECHNOLOGIES, INC.HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * QUICKNET TECHNOLOGIES, INC. SPECIFICALLY DISCLAIMS ANY WARRANTIES,
- * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS FOR A PARTICULAR PURPOSE.  THE SOFTWARE PROVIDED HEREUNDER IS
- * ON AN "AS IS" BASIS, AND QUICKNET TECHNOLOGIES, INC. HAS NO OBLIGATION 
- * TO PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS.
- *
- *****************************************************************************/
-
-#include <linux/telephony.h>
-
-
-/******************************************************************************
-*
-* IOCTL's used for the Quicknet Telephony Cards
-*
-* If you use the IXJCTL_TESTRAM command, the card must be power cycled to
-* reset the SRAM values before further use.
-*
-******************************************************************************/
-
-#define IXJCTL_DSP_RESET 		_IO  ('q', 0xC0)
-
-#define IXJCTL_RING                     PHONE_RING
-#define IXJCTL_HOOKSTATE                PHONE_HOOKSTATE
-#define IXJCTL_MAXRINGS			PHONE_MAXRINGS
-#define IXJCTL_RING_CADENCE		PHONE_RING_CADENCE
-#define IXJCTL_RING_START		PHONE_RING_START
-#define IXJCTL_RING_STOP		PHONE_RING_STOP
-
-#define IXJCTL_CARDTYPE			_IOR ('q', 0xC1, int)
-#define IXJCTL_SERIAL			_IOR ('q', 0xC2, int)
-#define IXJCTL_DSP_TYPE                 _IOR ('q', 0xC3, int)
-#define IXJCTL_DSP_VERSION              _IOR ('q', 0xC4, int)
-#define IXJCTL_VERSION              	_IOR ('q', 0xDA, char *)
-#define IXJCTL_DSP_IDLE			_IO  ('q', 0xC5)
-#define IXJCTL_TESTRAM			_IO  ('q', 0xC6)
-
-/******************************************************************************
-*
-* This group of IOCTLs deal with the record settings of the DSP
-*
-* The IXJCTL_REC_DEPTH command sets the internal buffer depth of the DSP.
-* Setting a lower depth reduces latency, but increases the demand of the
-* application to service the driver without frame loss.  The DSP has 480
-* bytes of physical buffer memory for the record channel so the true
-* maximum limit is determined by how many frames will fit in the buffer.
-*
-* 1 uncompressed (480 byte) 16-bit linear frame.
-* 2 uncompressed (240 byte) 8-bit A-law/mu-law frames.
-* 15 TrueSpeech 8.5 frames.
-* 20 TrueSpeech 6.3,5.3,4.8 or 4.1 frames.
-*
-* The default in the driver is currently set to 2 frames.
-*
-* The IXJCTL_REC_VOLUME and IXJCTL_PLAY_VOLUME commands both use a Q8
-* number as a parameter, 0x100 scales the signal by 1.0, 0x200 scales the
-* signal by 2.0, 0x80 scales the signal by 0.5.  No protection is given
-* against over-scaling, if the multiplication factor times the input
-* signal exceeds 16 bits, overflow distortion will occur.  The default
-* setting is 0x100 (1.0).
-*
-* The IXJCTL_REC_LEVEL returns the average signal level (not r.m.s.) on
-* the most recently recorded frame as a 16 bit value.
-******************************************************************************/
-
-#define IXJCTL_REC_CODEC                PHONE_REC_CODEC
-#define IXJCTL_REC_START                PHONE_REC_START
-#define IXJCTL_REC_STOP                 PHONE_REC_STOP
-#define IXJCTL_REC_DEPTH		PHONE_REC_DEPTH
-#define IXJCTL_FRAME			PHONE_FRAME
-#define IXJCTL_REC_VOLUME		PHONE_REC_VOLUME
-#define IXJCTL_REC_LEVEL		PHONE_REC_LEVEL
-
-typedef enum {
-	f300_640 = 4, f300_500, f1100, f350, f400, f480, f440, f620, f20_50,
-	f133_200, f300, f300_420, f330, f300_425, f330_440, f340, f350_400,
-	f350_440, f350_450, f360, f380_420, f392, f400_425, f400_440, f400_450,
-	f420, f425, f425_450, f425_475, f435, f440_450, f440_480, f445, f450,
-	f452, f475, f480_620, f494, f500, f520, f523, f525, f540_660, f587,
-	f590, f600, f660, f700, f740, f750, f750_1450, f770, f800, f816, f850,
-	f857_1645, f900, f900_1300, f935_1215, f941_1477, f942, f950, f950_1400,
-	f975, f1000, f1020, f1050, f1100_1750, f1140, f1200, f1209, f1330, f1336,
-	lf1366, f1380, f1400, f1477, f1600, f1633_1638, f1800, f1860
-} IXJ_FILTER_FREQ;
-
-typedef struct {
-	unsigned int filter;
-	IXJ_FILTER_FREQ freq;
-	char enable;
-} IXJ_FILTER;
-
-typedef struct {
-	char enable;
-	char en_filter;
-	unsigned int filter;
-	unsigned int on1;
-	unsigned int off1;
-	unsigned int on2;
-	unsigned int off2;
-	unsigned int on3;
-	unsigned int off3;
-} IXJ_FILTER_CADENCE;
-
-#define IXJCTL_SET_FILTER		_IOW ('q', 0xC7, IXJ_FILTER *)
-#define IXJCTL_SET_FILTER_RAW		_IOW ('q', 0xDD, IXJ_FILTER_RAW *)
-#define IXJCTL_GET_FILTER_HIST		_IOW ('q', 0xC8, int)
-#define IXJCTL_FILTER_CADENCE		_IOW ('q', 0xD6, IXJ_FILTER_CADENCE *)
-#define IXJCTL_PLAY_CID			_IO  ('q', 0xD7)
-/******************************************************************************
-*
-* This IOCTL allows you to reassign values in the tone index table.  The
-* tone table has 32 entries (0 - 31), but the driver only allows entries
-* 13 - 27 to be modified, entry 0 is reserved for silence and 1 - 12 are
-* the standard DTMF digits and 28 - 31 are the DTMF tones for A, B, C & D.
-* The positions used internally for Call Progress Tones are as follows:
-*    Dial Tone   - 25
-*    Ring Back   - 26
-*    Busy Signal - 27
-*
-* The freq values are calculated as:
-* freq = cos(2 * PI * frequency / 8000)
-*
-* The most commonly needed values are already calculated and listed in the
-* enum IXJ_TONE_FREQ.  Each tone index can have two frequencies with
-* different gains, if you are only using a single frequency set the unused
-* one to 0.
-*
-* The gain values range from 0 to 15 indicating +6dB to -24dB in 2dB
-* increments.
-*
-******************************************************************************/
-
-typedef enum {
-	hz20 = 0x7ffa,
-	hz50 = 0x7fe5,
-	hz133 = 0x7f4c,
-	hz200 = 0x7e6b,
-	hz261 = 0x7d50,		/* .63 C1  */
-	hz277 = 0x7cfa,		/* .18 CS1 */
-	hz293 = 0x7c9f,		/* .66 D1  */
-	hz300 = 0x7c75,
-	hz311 = 0x7c32,		/* .13 DS1 */
-	hz329 = 0x7bbf,		/* .63 E1  */
-	hz330 = 0x7bb8,
-	hz340 = 0x7b75,
-	hz349 = 0x7b37,		/* .23 F1  */
-	hz350 = 0x7b30,
-	hz360 = 0x7ae9,
-	hz369 = 0x7aa8,		/* .99 FS1 */
-	hz380 = 0x7a56,
-	hz392 = 0x79fa,		/* .00 G1  */
-	hz400 = 0x79bb,
-	hz415 = 0x7941,		/* .30 GS1 */
-	hz420 = 0x7918,
-	hz425 = 0x78ee,
-	hz435 = 0x7899,
-	hz440 = 0x786d,		/* .00 A1  */
-	hz445 = 0x7842,
-	hz450 = 0x7815,
-	hz452 = 0x7803,
-	hz466 = 0x7784,		/* .16 AS1 */
-	hz475 = 0x7731,
-	hz480 = 0x7701,
-	hz493 = 0x7685,		/* .88 B1  */
-	hz494 = 0x767b,
-	hz500 = 0x7640,
-	hz520 = 0x7578,
-	hz523 = 0x7559,		/* .25 C2  */
-	hz525 = 0x7544,
-	hz540 = 0x74a7,
-	hz554 = 0x7411,		/* .37 CS2 */
-	hz587 = 0x72a1,		/* .33 D2  */
-	hz590 = 0x727f,
-	hz600 = 0x720b,
-	hz620 = 0x711e,
-	hz622 = 0x7106,		/* .25 DS2 */
-	hz659 = 0x6f3b,		/* .26 E2  */
-	hz660 = 0x6f2e,
-	hz698 = 0x6d3d,		/* .46 F2  */
-	hz700 = 0x6d22,
-	hz739 = 0x6b09,		/* .99 FS2 */
-	hz740 = 0x6afa,
-	hz750 = 0x6a6c,
-	hz770 = 0x694b,
-	hz783 = 0x688b,		/* .99 G2  */
-	hz800 = 0x678d,
-	hz816 = 0x6698,
-	hz830 = 0x65bf,		/* .61 GS2 */
-	hz850 = 0x6484,
-	hz857 = 0x6414,
-	hz880 = 0x629f,		/* .00 A2  */
-	hz900 = 0x6154,
-	hz932 = 0x5f35,		/* .33 AS2 */
-	hz935 = 0x5f01,
-	hz941 = 0x5e9a,
-	hz942 = 0x5e88,
-	hz950 = 0x5dfd,
-	hz975 = 0x5c44,
-	hz1000 = 0x5a81,
-	hz1020 = 0x5912,
-	hz1050 = 0x56e2,
-	hz1100 = 0x5320,
-	hz1140 = 0x5007,
-	hz1200 = 0x4b3b,
-	hz1209 = 0x4a80,
-	hz1215 = 0x4a02,
-	hz1250 = 0x471c,
-	hz1300 = 0x42e0,
-	hz1330 = 0x4049,
-	hz1336 = 0x3fc4,
-	hz1366 = 0x3d22,
-	hz1380 = 0x3be4,
-	hz1400 = 0x3a1b,
-	hz1450 = 0x3596,
-	hz1477 = 0x331c,
-	hz1500 = 0x30fb,
-	hz1600 = 0x278d,
-	hz1633 = 0x2462,
-	hz1638 = 0x23e7,
-	hz1645 = 0x233a,
-	hz1750 = 0x18f8,
-	hz1800 = 0x1405,
-	hz1860 = 0xe0b,
-	hz2100 = 0xf5f6,
-	hz2130 = 0xf2f5,
-	hz2450 = 0xd3b3,
-	hz2750 = 0xb8e4
-} IXJ_FREQ;
-
-typedef enum {
-	C1 = hz261,
-	CS1 = hz277,
-	D1 = hz293,
-	DS1 = hz311,
-	E1 = hz329,
-	F1 = hz349,
-	FS1 = hz369,
-	G1 = hz392,
-	GS1 = hz415,
-	A1 = hz440,
-	AS1 = hz466,
-	B1 = hz493,
-	C2 = hz523,
-	CS2 = hz554,
-	D2 = hz587,
-	DS2 = hz622,
-	E2 = hz659,
-	F2 = hz698,
-	FS2 = hz739,
-	G2 = hz783,
-	GS2 = hz830,
-	A2 = hz880,
-	AS2 = hz932,
-} IXJ_NOTE;
-
-typedef struct {
-	int tone_index;
-	int freq0;
-	int gain0;
-	int freq1;
-	int gain1;
-} IXJ_TONE;
-
-#define IXJCTL_INIT_TONE		_IOW ('q', 0xC9, IXJ_TONE *)
-
-/******************************************************************************
-*
-* The IXJCTL_TONE_CADENCE ioctl defines tone sequences used for various
-* Call Progress Tones (CPT).  This is accomplished by setting up an array of
-* IXJ_CADENCE_ELEMENT structures that sequentially define the states of
-* the tone sequence.  The tone_on_time and tone_off time are in
-* 250 microsecond intervals.  A pointer to this array is passed to the
-* driver as the ce element of an IXJ_CADENCE structure.  The elements_used
-* must be set to the number of IXJ_CADENCE_ELEMENTS in the array.  The
-* termination variable defines what to do at the end of a cadence, the
-* options are to play the cadence once and stop, to repeat the last
-* element of the cadence indefinitely, or to repeat the entire cadence
-* indefinitely.  The ce variable is a pointer to the array of IXJ_TONE
-* structures.  If the freq0 variable is non-zero, the tone table contents
-* for the tone_index are updated to the frequencies and gains defined.  It
-* should be noted that DTMF tones cannot be reassigned, so if DTMF tone
-* table indexes are used in a cadence the frequency and gain variables will
-* be ignored.
-*
-* If the array elements contain frequency parameters the driver will
-* initialize the needed tone table elements and begin playing the tone,
-* there is no preset limit on the number of elements in the cadence.  If
-* there is more than one frequency used in the cadence, sequential elements
-* of different frequencies MUST use different tone table indexes.  Only one
-* cadence can be played at a time.  It is possible to build complex
-* cadences with multiple frequencies using 2 tone table indexes by
-* alternating between them.
-*
-******************************************************************************/
-
-typedef struct {
-	int index;
-	int tone_on_time;
-	int tone_off_time;
-	int freq0;
-	int gain0;
-	int freq1;
-	int gain1;
-} IXJ_CADENCE_ELEMENT;
-
-typedef enum {
-	PLAY_ONCE,
-	REPEAT_LAST_ELEMENT,
-	REPEAT_ALL
-} IXJ_CADENCE_TERM;
-
-typedef struct {
-	int elements_used;
-	IXJ_CADENCE_TERM termination;
-	IXJ_CADENCE_ELEMENT __user *ce;
-} IXJ_CADENCE;
-
-#define IXJCTL_TONE_CADENCE		_IOW ('q', 0xCA, IXJ_CADENCE *)
-/******************************************************************************
-*
-* This group of IOCTLs deal with the playback settings of the DSP
-*
-******************************************************************************/
-
-#define IXJCTL_PLAY_CODEC               PHONE_PLAY_CODEC
-#define IXJCTL_PLAY_START               PHONE_PLAY_START
-#define IXJCTL_PLAY_STOP                PHONE_PLAY_STOP
-#define IXJCTL_PLAY_DEPTH		PHONE_PLAY_DEPTH
-#define IXJCTL_PLAY_VOLUME		PHONE_PLAY_VOLUME
-#define IXJCTL_PLAY_LEVEL		PHONE_PLAY_LEVEL
-
-/******************************************************************************
-*
-* This group of IOCTLs deal with the Acoustic Echo Cancellation settings
-* of the DSP
-*
-* Issuing the IXJCTL_AEC_START command with a value of AEC_OFF has the
-* same effect as IXJCTL_AEC_STOP.  This is to simplify slider bar
-* controls.  IXJCTL_AEC_GET_LEVEL returns the current setting of the AEC.
-******************************************************************************/
-#define IXJCTL_AEC_START		_IOW ('q', 0xCB, int)
-#define IXJCTL_AEC_STOP			_IO  ('q', 0xCC)
-#define IXJCTL_AEC_GET_LEVEL		_IO  ('q', 0xCD)
-
-#define AEC_OFF   0
-#define AEC_LOW   1
-#define AEC_MED   2
-#define AEC_HIGH  3
-#define AEC_AUTO  4
-#define AEC_AGC   5
-/******************************************************************************
-*
-* Call Progress Tones, DTMF, etc.
-* IXJCTL_DTMF_OOB determines if DTMF signaling is sent as Out-Of-Band
-* only.  If you pass a 1, DTMF is suppressed from the audio stream.
-* Tone on and off times are in 250 microsecond intervals so
-* ioctl(ixj1, IXJCTL_SET_TONE_ON_TIME, 360);
-* will set the tone on time of board ixj1 to 360 * 250us = 90ms
-* the default values of tone on and off times is 840 or 210ms
-******************************************************************************/
-
-#define IXJCTL_DTMF_READY		PHONE_DTMF_READY
-#define IXJCTL_GET_DTMF                 PHONE_GET_DTMF
-#define IXJCTL_GET_DTMF_ASCII           PHONE_GET_DTMF_ASCII
-#define IXJCTL_DTMF_OOB			PHONE_DTMF_OOB
-#define IXJCTL_EXCEPTION		PHONE_EXCEPTION
-#define IXJCTL_PLAY_TONE		PHONE_PLAY_TONE
-#define IXJCTL_SET_TONE_ON_TIME		PHONE_SET_TONE_ON_TIME
-#define IXJCTL_SET_TONE_OFF_TIME	PHONE_SET_TONE_OFF_TIME
-#define IXJCTL_GET_TONE_ON_TIME		PHONE_GET_TONE_ON_TIME
-#define IXJCTL_GET_TONE_OFF_TIME	PHONE_GET_TONE_OFF_TIME
-#define IXJCTL_GET_TONE_STATE		PHONE_GET_TONE_STATE
-#define IXJCTL_BUSY			PHONE_BUSY
-#define IXJCTL_RINGBACK			PHONE_RINGBACK
-#define IXJCTL_DIALTONE			PHONE_DIALTONE
-#define IXJCTL_CPT_STOP			PHONE_CPT_STOP
-
-/******************************************************************************
-* LineJACK specific IOCTLs
-*
-* The lsb 4 bits of the LED argument represent the state of each of the 4
-* LED's on the LineJACK
-******************************************************************************/
-
-#define IXJCTL_SET_LED			_IOW ('q', 0xCE, int)
-#define IXJCTL_MIXER			_IOW ('q', 0xCF, int)
-
-/******************************************************************************
-* 
-* The master volume controls use attenuation with 32 levels from 0 to -62dB
-* with steps of 2dB each, the defines should be OR'ed together then sent
-* as the parameter to the mixer command to change the mixer settings.
-* 
-******************************************************************************/
-#define MIXER_MASTER_L		0x0000
-#define MIXER_MASTER_R		0x0100
-#define ATT00DB			0x00
-#define ATT02DB			0x01
-#define ATT04DB			0x02
-#define ATT06DB			0x03
-#define ATT08DB			0x04
-#define ATT10DB			0x05
-#define ATT12DB			0x06
-#define ATT14DB			0x07
-#define ATT16DB			0x08
-#define ATT18DB			0x09
-#define ATT20DB			0x0A
-#define ATT22DB			0x0B
-#define ATT24DB			0x0C
-#define ATT26DB			0x0D
-#define ATT28DB			0x0E
-#define ATT30DB			0x0F
-#define ATT32DB			0x10
-#define ATT34DB			0x11
-#define ATT36DB			0x12
-#define ATT38DB			0x13
-#define ATT40DB			0x14
-#define ATT42DB			0x15
-#define ATT44DB			0x16
-#define ATT46DB			0x17
-#define ATT48DB			0x18
-#define ATT50DB			0x19
-#define ATT52DB			0x1A
-#define ATT54DB			0x1B
-#define ATT56DB			0x1C
-#define ATT58DB			0x1D
-#define ATT60DB			0x1E
-#define ATT62DB			0x1F
-#define MASTER_MUTE		0x80
-
-/******************************************************************************
-* 
-* The input volume controls use gain with 32 levels from +12dB to -50dB
-* with steps of 2dB each, the defines should be OR'ed together then sent
-* as the parameter to the mixer command to change the mixer settings.
-* 
-******************************************************************************/
-#define MIXER_PORT_CD_L		0x0600
-#define MIXER_PORT_CD_R		0x0700
-#define MIXER_PORT_LINE_IN_L	0x0800
-#define MIXER_PORT_LINE_IN_R	0x0900
-#define MIXER_PORT_POTS_REC	0x0C00
-#define MIXER_PORT_MIC		0x0E00
-
-#define GAIN12DB		0x00
-#define GAIN10DB		0x01
-#define GAIN08DB		0x02
-#define GAIN06DB		0x03
-#define GAIN04DB		0x04
-#define GAIN02DB		0x05
-#define GAIN00DB		0x06
-#define GAIN_02DB		0x07
-#define GAIN_04DB		0x08
-#define GAIN_06DB		0x09
-#define GAIN_08DB		0x0A
-#define GAIN_10DB		0x0B
-#define GAIN_12DB		0x0C
-#define GAIN_14DB		0x0D
-#define GAIN_16DB		0x0E
-#define GAIN_18DB		0x0F
-#define GAIN_20DB		0x10
-#define GAIN_22DB		0x11
-#define GAIN_24DB		0x12
-#define GAIN_26DB		0x13
-#define GAIN_28DB		0x14
-#define GAIN_30DB		0x15
-#define GAIN_32DB		0x16
-#define GAIN_34DB		0x17
-#define GAIN_36DB		0x18
-#define GAIN_38DB		0x19
-#define GAIN_40DB		0x1A
-#define GAIN_42DB		0x1B
-#define GAIN_44DB		0x1C
-#define GAIN_46DB		0x1D
-#define GAIN_48DB		0x1E
-#define GAIN_50DB		0x1F
-#define INPUT_MUTE		0x80
-
-/******************************************************************************
-* 
-* The POTS volume control use attenuation with 8 levels from 0dB to -28dB
-* with steps of 4dB each, the defines should be OR'ed together then sent
-* as the parameter to the mixer command to change the mixer settings.
-* 
-******************************************************************************/
-#define MIXER_PORT_POTS_PLAY	0x0F00
-
-#define POTS_ATT_00DB		0x00
-#define POTS_ATT_04DB		0x01
-#define POTS_ATT_08DB		0x02
-#define POTS_ATT_12DB		0x03
-#define POTS_ATT_16DB		0x04
-#define POTS_ATT_20DB		0x05
-#define POTS_ATT_24DB		0x06
-#define POTS_ATT_28DB		0x07
-#define POTS_MUTE		0x80
-
-/******************************************************************************
-* 
-* The DAA controls the interface to the PSTN port.  The driver loads the
-* US coefficients by default, so if you live in a different country you
-* need to load the set for your countries phone system.
-* 
-******************************************************************************/
-#define IXJCTL_DAA_COEFF_SET		_IOW ('q', 0xD0, int)
-
-#define DAA_US 		1	/*PITA 8kHz */
-#define DAA_UK 		2	/*ISAR34 8kHz */
-#define DAA_FRANCE 	3	/* */
-#define DAA_GERMANY	4
-#define DAA_AUSTRALIA	5
-#define DAA_JAPAN	6
-
-/******************************************************************************
-* 
-* Use IXJCTL_PORT to set or query the port the card is set to.  If the
-* argument is set to PORT_QUERY, the return value of the ioctl will
-* indicate which port is currently in use, otherwise it will change the
-* port.
-* 
-******************************************************************************/
-#define IXJCTL_PORT			_IOW ('q', 0xD1, int)
-
-#define PORT_QUERY	0
-#define PORT_POTS	1
-#define PORT_PSTN	2
-#define PORT_SPEAKER	3
-#define PORT_HANDSET	4
-
-#define IXJCTL_PSTN_SET_STATE		PHONE_PSTN_SET_STATE
-#define IXJCTL_PSTN_GET_STATE		PHONE_PSTN_GET_STATE
-
-#define PSTN_ON_HOOK	0
-#define PSTN_RINGING	1
-#define PSTN_OFF_HOOK	2
-#define PSTN_PULSE_DIAL	3
-
-/******************************************************************************
-* 
-* The DAA Analog GAIN sets 2 parameters at one time, the receive gain (AGRR), 
-* and the transmit gain (AGX).  OR together the components and pass them
-* as the parameter to IXJCTL_DAA_AGAIN.  The default setting is both at 0dB.
-* 
-******************************************************************************/
-#define IXJCTL_DAA_AGAIN		_IOW ('q', 0xD2, int)
-
-#define AGRR00DB	0x00	/* Analog gain in receive direction 0dB */
-#define AGRR3_5DB	0x10	/* Analog gain in receive direction 3.5dB */
-#define AGRR06DB	0x30	/* Analog gain in receive direction 6dB */
-
-#define AGX00DB		0x00	/* Analog gain in transmit direction 0dB */
-#define AGX_6DB		0x04	/* Analog gain in transmit direction -6dB */
-#define AGX3_5DB	0x08	/* Analog gain in transmit direction 3.5dB */
-#define AGX_2_5B	0x0C	/* Analog gain in transmit direction -2.5dB */
-
-#define IXJCTL_PSTN_LINETEST		_IO  ('q', 0xD3)
-
-#define IXJCTL_CID			_IOR ('q', 0xD4, PHONE_CID *)
-#define IXJCTL_VMWI			_IOR ('q', 0xD8, int)
-#define IXJCTL_CIDCW			_IOW ('q', 0xD9, PHONE_CID *)
-/******************************************************************************
-* 
-* The wink duration is tunable with this ioctl.  The default wink duration  
-* is 320ms.  You do not need to use this ioctl if you do not require a
-* different wink duration.
-* 
-******************************************************************************/
-#define IXJCTL_WINK_DURATION		PHONE_WINK_DURATION
-
-/******************************************************************************
-* 
-* This ioctl will connect the POTS port to the PSTN port on the LineJACK
-* In order for this to work properly the port selection should be set to
-* the PSTN port with IXJCTL_PORT prior to calling this ioctl.  This will
-* enable conference calls between PSTN callers and network callers.
-* Passing a 1 to this ioctl enables the POTS<->PSTN connection while
-* passing a 0 turns it back off.
-* 
-******************************************************************************/
-#define IXJCTL_POTS_PSTN		_IOW ('q', 0xD5, int)
-
-/******************************************************************************
-*
-* IOCTLs added by request.
-*
-* IXJCTL_HZ sets the value your Linux kernel uses for HZ as defined in
-*           /usr/include/asm/param.h, this determines the fundamental
-*           frequency of the clock ticks on your Linux system.  The kernel
-*           must be rebuilt if you change this value, also all modules you
-*           use (except this one) must be recompiled.  The default value
-*           is 100, and you only need to use this IOCTL if you use some
-*           other value.
-*
-*
-* IXJCTL_RATE sets the number of times per second that the driver polls
-*             the DSP.  This value cannot be larger than HZ.  By
-*             increasing both of these values, you may be able to reduce
-*             latency because the max hang time that can exist between the
-*             driver and the DSP will be reduced.
-*
-******************************************************************************/
-
-#define IXJCTL_HZ                       _IOW ('q', 0xE0, int)
-#define IXJCTL_RATE                     _IOW ('q', 0xE1, int)
-#define IXJCTL_FRAMES_READ		_IOR ('q', 0xE2, unsigned long)
-#define IXJCTL_FRAMES_WRITTEN		_IOR ('q', 0xE3, unsigned long)
-#define IXJCTL_READ_WAIT		_IOR ('q', 0xE4, unsigned long)
-#define IXJCTL_WRITE_WAIT		_IOR ('q', 0xE5, unsigned long)
-#define IXJCTL_DRYBUFFER_READ		_IOR ('q', 0xE6, unsigned long)
-#define IXJCTL_DRYBUFFER_CLEAR		_IO  ('q', 0xE7)
-#define IXJCTL_DTMF_PRESCALE		_IOW ('q', 0xE8, int)
-
-/******************************************************************************
-*
-* This ioctl allows the user application to control what events the driver
-* will send signals for, and what signals it will send for which event.
-* By default, if signaling is enabled, all events will send SIGIO when
-* they occur.  To disable signals for an event set the signal to 0.
-*
-******************************************************************************/
-typedef enum {
-	SIG_DTMF_READY,
-	SIG_HOOKSTATE,
-	SIG_FLASH,
-	SIG_PSTN_RING,
-	SIG_CALLER_ID,
-	SIG_PSTN_WINK,
-	SIG_F0, SIG_F1, SIG_F2, SIG_F3,
-	SIG_FC0, SIG_FC1, SIG_FC2, SIG_FC3,
-	SIG_READ_READY = 33,
-	SIG_WRITE_READY = 34
-} IXJ_SIGEVENT;
-
-typedef struct {
-	unsigned int event;
-	int signal;
-} IXJ_SIGDEF;
-
-#define IXJCTL_SIGCTL			_IOW ('q', 0xE9, IXJ_SIGDEF *)
-
-/******************************************************************************
-*
-* These ioctls allow the user application to change the gain in the 
-* Smart Cable of the Internet Phone Card.  Sending -1 as a value will cause
-* return value to be the current setting.  Valid values to set are 0x00 - 0x1F
-*
-* 11111 = +12 dB
-* 10111 =   0 dB
-* 00000 = -34.5 dB
-*
-* IXJCTL_SC_RXG sets the Receive gain
-* IXJCTL_SC_TXG sets the Transmit gain
-*
-******************************************************************************/
-#define IXJCTL_SC_RXG			_IOW ('q', 0xEA, int)
-#define IXJCTL_SC_TXG			_IOW ('q', 0xEB, int)
-
-/******************************************************************************
-*
-* The intercom IOCTL's short the output from one card to the input of the
-* other and vice versa (actually done in the DSP read function).  It is only
-* necessary to execute the IOCTL on one card, but it is necessary to have
-* both devices open to be able to detect hook switch changes.  The record
-* codec and rate of each card must match the playback codec and rate of
-* the other card for this to work properly.
-*
-******************************************************************************/
-
-#define IXJCTL_INTERCOM_START 		_IOW ('q', 0xFD, int)
-#define IXJCTL_INTERCOM_STOP  		_IOW ('q', 0xFE, int)
-
-/******************************************************************************
- *
- * new structure for accessing raw filter information
- *
- ******************************************************************************/
-
-typedef struct {
-	unsigned int filter;
-	char enable;
-	unsigned int coeff[19];
-} IXJ_FILTER_RAW;
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/jbd.h b/ANDROID_3.4.5/include/linux/jbd.h
deleted file mode 100644
index d211732b..00000000
--- a/ANDROID_3.4.5/include/linux/jbd.h
+++ /dev/null
@@ -1,1031 +0,0 @@
-/*
- * linux/include/linux/jbd.h
- *
- * Written by Stephen C. Tweedie <sct@redhat.com>
- *
- * Copyright 1998-2000 Red Hat, Inc --- All Rights Reserved
- *
- * This file is part of the Linux kernel and is made available under
- * the terms of the GNU General Public License, version 2, or at your
- * option, any later version, incorporated herein by reference.
- *
- * Definitions for transaction data structures for the buffer cache
- * filesystem journaling support.
- */
-
-#ifndef _LINUX_JBD_H
-#define _LINUX_JBD_H
-
-/* Allow this file to be included directly into e2fsprogs */
-#ifndef __KERNEL__
-#include "jfs_compat.h"
-#define JFS_DEBUG
-#define jfs_debug jbd_debug
-#else
-
-#include <linux/types.h>
-#include <linux/buffer_head.h>
-#include <linux/journal-head.h>
-#include <linux/stddef.h>
-#include <linux/bit_spinlock.h>
-#include <linux/mutex.h>
-#include <linux/timer.h>
-#include <linux/lockdep.h>
-#include <linux/slab.h>
-
-#define journal_oom_retry 1
-
-/*
- * Define JBD_PARANOID_IOFAIL to cause a kernel BUG() if ext3 finds
- * certain classes of error which can occur due to failed IOs.  Under
- * normal use we want ext3 to continue after such errors, because
- * hardware _can_ fail, but for debugging purposes when running tests on
- * known-good hardware we may want to trap these errors.
- */
-#undef JBD_PARANOID_IOFAIL
-
-/*
- * The default maximum commit age, in seconds.
- */
-#define JBD_DEFAULT_MAX_COMMIT_AGE 5
-
-#ifdef CONFIG_JBD_DEBUG
-/*
- * Define JBD_EXPENSIVE_CHECKING to enable more expensive internal
- * consistency checks.  By default we don't do this unless
- * CONFIG_JBD_DEBUG is on.
- */
-#define JBD_EXPENSIVE_CHECKING
-extern u8 journal_enable_debug;
-
-#define jbd_debug(n, f, a...)						\
-	do {								\
-		if ((n) <= journal_enable_debug) {			\
-			printk (KERN_DEBUG "(%s, %d): %s: ",		\
-				__FILE__, __LINE__, __func__);	\
-			printk (f, ## a);				\
-		}							\
-	} while (0)
-#else
-#define jbd_debug(f, a...)	/**/
-#endif
-
-static inline void *jbd_alloc(size_t size, gfp_t flags)
-{
-	return (void *)__get_free_pages(flags, get_order(size));
-}
-
-static inline void jbd_free(void *ptr, size_t size)
-{
-	free_pages((unsigned long)ptr, get_order(size));
-};
-
-#define JFS_MIN_JOURNAL_BLOCKS 1024
-
-
-/**
- * typedef handle_t - The handle_t type represents a single atomic update being performed by some process.
- *
- * All filesystem modifications made by the process go
- * through this handle.  Recursive operations (such as quota operations)
- * are gathered into a single update.
- *
- * The buffer credits field is used to account for journaled buffers
- * being modified by the running process.  To ensure that there is
- * enough log space for all outstanding operations, we need to limit the
- * number of outstanding buffers possible at any time.  When the
- * operation completes, any buffer credits not used are credited back to
- * the transaction, so that at all times we know how many buffers the
- * outstanding updates on a transaction might possibly touch.
- *
- * This is an opaque datatype.
- **/
-typedef struct handle_s		handle_t;	/* Atomic operation type */
-
-
-/**
- * typedef journal_t - The journal_t maintains all of the journaling state information for a single filesystem.
- *
- * journal_t is linked to from the fs superblock structure.
- *
- * We use the journal_t to keep track of all outstanding transaction
- * activity on the filesystem, and to manage the state of the log
- * writing process.
- *
- * This is an opaque datatype.
- **/
-typedef struct journal_s	journal_t;	/* Journal control structure */
-#endif
-
-/*
- * Internal structures used by the logging mechanism:
- */
-
-#define JFS_MAGIC_NUMBER 0xc03b3998U /* The first 4 bytes of /dev/random! */
-
-/*
- * On-disk structures
- */
-
-/*
- * Descriptor block types:
- */
-
-#define JFS_DESCRIPTOR_BLOCK	1
-#define JFS_COMMIT_BLOCK	2
-#define JFS_SUPERBLOCK_V1	3
-#define JFS_SUPERBLOCK_V2	4
-#define JFS_REVOKE_BLOCK	5
-
-/*
- * Standard header for all descriptor blocks:
- */
-typedef struct journal_header_s
-{
-	__be32		h_magic;
-	__be32		h_blocktype;
-	__be32		h_sequence;
-} journal_header_t;
-
-
-/*
- * The block tag: used to describe a single buffer in the journal
- */
-typedef struct journal_block_tag_s
-{
-	__be32		t_blocknr;	/* The on-disk block number */
-	__be32		t_flags;	/* See below */
-} journal_block_tag_t;
-
-/*
- * The revoke descriptor: used on disk to describe a series of blocks to
- * be revoked from the log
- */
-typedef struct journal_revoke_header_s
-{
-	journal_header_t r_header;
-	__be32		 r_count;	/* Count of bytes used in the block */
-} journal_revoke_header_t;
-
-
-/* Definitions for the journal tag flags word: */
-#define JFS_FLAG_ESCAPE		1	/* on-disk block is escaped */
-#define JFS_FLAG_SAME_UUID	2	/* block has same uuid as previous */
-#define JFS_FLAG_DELETED	4	/* block deleted by this transaction */
-#define JFS_FLAG_LAST_TAG	8	/* last tag in this descriptor block */
-
-
-/*
- * The journal superblock.  All fields are in big-endian byte order.
- */
-typedef struct journal_superblock_s
-{
-/* 0x0000 */
-	journal_header_t s_header;
-
-/* 0x000C */
-	/* Static information describing the journal */
-	__be32	s_blocksize;		/* journal device blocksize */
-	__be32	s_maxlen;		/* total blocks in journal file */
-	__be32	s_first;		/* first block of log information */
-
-/* 0x0018 */
-	/* Dynamic information describing the current state of the log */
-	__be32	s_sequence;		/* first commit ID expected in log */
-	__be32	s_start;		/* blocknr of start of log */
-
-/* 0x0020 */
-	/* Error value, as set by journal_abort(). */
-	__be32	s_errno;
-
-/* 0x0024 */
-	/* Remaining fields are only valid in a version-2 superblock */
-	__be32	s_feature_compat;	/* compatible feature set */
-	__be32	s_feature_incompat;	/* incompatible feature set */
-	__be32	s_feature_ro_compat;	/* readonly-compatible feature set */
-/* 0x0030 */
-	__u8	s_uuid[16];		/* 128-bit uuid for journal */
-
-/* 0x0040 */
-	__be32	s_nr_users;		/* Nr of filesystems sharing log */
-
-	__be32	s_dynsuper;		/* Blocknr of dynamic superblock copy*/
-
-/* 0x0048 */
-	__be32	s_max_transaction;	/* Limit of journal blocks per trans.*/
-	__be32	s_max_trans_data;	/* Limit of data blocks per trans. */
-
-/* 0x0050 */
-	__u32	s_padding[44];
-
-/* 0x0100 */
-	__u8	s_users[16*48];		/* ids of all fs'es sharing the log */
-/* 0x0400 */
-} journal_superblock_t;
-
-#define JFS_HAS_COMPAT_FEATURE(j,mask)					\
-	((j)->j_format_version >= 2 &&					\
-	 ((j)->j_superblock->s_feature_compat & cpu_to_be32((mask))))
-#define JFS_HAS_RO_COMPAT_FEATURE(j,mask)				\
-	((j)->j_format_version >= 2 &&					\
-	 ((j)->j_superblock->s_feature_ro_compat & cpu_to_be32((mask))))
-#define JFS_HAS_INCOMPAT_FEATURE(j,mask)				\
-	((j)->j_format_version >= 2 &&					\
-	 ((j)->j_superblock->s_feature_incompat & cpu_to_be32((mask))))
-
-#define JFS_FEATURE_INCOMPAT_REVOKE	0x00000001
-
-/* Features known to this kernel version: */
-#define JFS_KNOWN_COMPAT_FEATURES	0
-#define JFS_KNOWN_ROCOMPAT_FEATURES	0
-#define JFS_KNOWN_INCOMPAT_FEATURES	JFS_FEATURE_INCOMPAT_REVOKE
-
-#ifdef __KERNEL__
-
-#include <linux/fs.h>
-#include <linux/sched.h>
-#include <linux/jbd_common.h>
-
-#define J_ASSERT(assert)	BUG_ON(!(assert))
-
-#define J_ASSERT_BH(bh, expr)	J_ASSERT(expr)
-#define J_ASSERT_JH(jh, expr)	J_ASSERT(expr)
-
-#if defined(JBD_PARANOID_IOFAIL)
-#define J_EXPECT(expr, why...)		J_ASSERT(expr)
-#define J_EXPECT_BH(bh, expr, why...)	J_ASSERT_BH(bh, expr)
-#define J_EXPECT_JH(jh, expr, why...)	J_ASSERT_JH(jh, expr)
-#else
-#define __journal_expect(expr, why...)					     \
-	({								     \
-		int val = (expr);					     \
-		if (!val) {						     \
-			printk(KERN_ERR					     \
-				"EXT3-fs unexpected failure: %s;\n",# expr); \
-			printk(KERN_ERR why "\n");			     \
-		}							     \
-		val;							     \
-	})
-#define J_EXPECT(expr, why...)		__journal_expect(expr, ## why)
-#define J_EXPECT_BH(bh, expr, why...)	__journal_expect(expr, ## why)
-#define J_EXPECT_JH(jh, expr, why...)	__journal_expect(expr, ## why)
-#endif
-
-struct jbd_revoke_table_s;
-
-/**
- * struct handle_s - this is the concrete type associated with handle_t.
- * @h_transaction: Which compound transaction is this update a part of?
- * @h_buffer_credits: Number of remaining buffers we are allowed to dirty.
- * @h_ref: Reference count on this handle
- * @h_err: Field for caller's use to track errors through large fs operations
- * @h_sync: flag for sync-on-close
- * @h_jdata: flag to force data journaling
- * @h_aborted: flag indicating fatal error on handle
- * @h_lockdep_map: lockdep info for debugging lock problems
- */
-struct handle_s
-{
-	/* Which compound transaction is this update a part of? */
-	transaction_t		*h_transaction;
-
-	/* Number of remaining buffers we are allowed to dirty: */
-	int			h_buffer_credits;
-
-	/* Reference count on this handle */
-	int			h_ref;
-
-	/* Field for caller's use to track errors through large fs */
-	/* operations */
-	int			h_err;
-
-	/* Flags [no locking] */
-	unsigned int	h_sync:		1;	/* sync-on-close */
-	unsigned int	h_jdata:	1;	/* force data journaling */
-	unsigned int	h_aborted:	1;	/* fatal error on handle */
-
-#ifdef CONFIG_DEBUG_LOCK_ALLOC
-	struct lockdep_map	h_lockdep_map;
-#endif
-};
-
-
-/* The transaction_t type is the guts of the journaling mechanism.  It
- * tracks a compound transaction through its various states:
- *
- * RUNNING:	accepting new updates
- * LOCKED:	Updates still running but we don't accept new ones
- * RUNDOWN:	Updates are tidying up but have finished requesting
- *		new buffers to modify (state not used for now)
- * FLUSH:       All updates complete, but we are still writing to disk
- * COMMIT:      All data on disk, writing commit record
- * FINISHED:	We still have to keep the transaction for checkpointing.
- *
- * The transaction keeps track of all of the buffers modified by a
- * running transaction, and all of the buffers committed but not yet
- * flushed to home for finished transactions.
- */
-
-/*
- * Lock ranking:
- *
- *    j_list_lock
- *      ->jbd_lock_bh_journal_head()	(This is "innermost")
- *
- *    j_state_lock
- *    ->jbd_lock_bh_state()
- *
- *    jbd_lock_bh_state()
- *    ->j_list_lock
- *
- *    j_state_lock
- *    ->t_handle_lock
- *
- *    j_state_lock
- *    ->j_list_lock			(journal_unmap_buffer)
- *
- */
-
-struct transaction_s
-{
-	/* Pointer to the journal for this transaction. [no locking] */
-	journal_t		*t_journal;
-
-	/* Sequence number for this transaction [no locking] */
-	tid_t			t_tid;
-
-	/*
-	 * Transaction's current state
-	 * [no locking - only kjournald alters this]
-	 * [j_list_lock] guards transition of a transaction into T_FINISHED
-	 * state and subsequent call of __journal_drop_transaction()
-	 * FIXME: needs barriers
-	 * KLUDGE: [use j_state_lock]
-	 */
-	enum {
-		T_RUNNING,
-		T_LOCKED,
-		T_FLUSH,
-		T_COMMIT,
-		T_COMMIT_RECORD,
-		T_FINISHED
-	}			t_state;
-
-	/*
-	 * Where in the log does this transaction's commit start? [no locking]
-	 */
-	unsigned int		t_log_start;
-
-	/* Number of buffers on the t_buffers list [j_list_lock] */
-	int			t_nr_buffers;
-
-	/*
-	 * Doubly-linked circular list of all buffers reserved but not yet
-	 * modified by this transaction [j_list_lock]
-	 */
-	struct journal_head	*t_reserved_list;
-
-	/*
-	 * Doubly-linked circular list of all buffers under writeout during
-	 * commit [j_list_lock]
-	 */
-	struct journal_head	*t_locked_list;
-
-	/*
-	 * Doubly-linked circular list of all metadata buffers owned by this
-	 * transaction [j_list_lock]
-	 */
-	struct journal_head	*t_buffers;
-
-	/*
-	 * Doubly-linked circular list of all data buffers still to be
-	 * flushed before this transaction can be committed [j_list_lock]
-	 */
-	struct journal_head	*t_sync_datalist;
-
-	/*
-	 * Doubly-linked circular list of all forget buffers (superseded
-	 * buffers which we can un-checkpoint once this transaction commits)
-	 * [j_list_lock]
-	 */
-	struct journal_head	*t_forget;
-
-	/*
-	 * Doubly-linked circular list of all buffers still to be flushed before
-	 * this transaction can be checkpointed. [j_list_lock]
-	 */
-	struct journal_head	*t_checkpoint_list;
-
-	/*
-	 * Doubly-linked circular list of all buffers submitted for IO while
-	 * checkpointing. [j_list_lock]
-	 */
-	struct journal_head	*t_checkpoint_io_list;
-
-	/*
-	 * Doubly-linked circular list of temporary buffers currently undergoing
-	 * IO in the log [j_list_lock]
-	 */
-	struct journal_head	*t_iobuf_list;
-
-	/*
-	 * Doubly-linked circular list of metadata buffers being shadowed by log
-	 * IO.  The IO buffers on the iobuf list and the shadow buffers on this
-	 * list match each other one for one at all times. [j_list_lock]
-	 */
-	struct journal_head	*t_shadow_list;
-
-	/*
-	 * Doubly-linked circular list of control buffers being written to the
-	 * log. [j_list_lock]
-	 */
-	struct journal_head	*t_log_list;
-
-	/*
-	 * Protects info related to handles
-	 */
-	spinlock_t		t_handle_lock;
-
-	/*
-	 * Number of outstanding updates running on this transaction
-	 * [t_handle_lock]
-	 */
-	int			t_updates;
-
-	/*
-	 * Number of buffers reserved for use by all handles in this transaction
-	 * handle but not yet modified. [t_handle_lock]
-	 */
-	int			t_outstanding_credits;
-
-	/*
-	 * Forward and backward links for the circular list of all transactions
-	 * awaiting checkpoint. [j_list_lock]
-	 */
-	transaction_t		*t_cpnext, *t_cpprev;
-
-	/*
-	 * When will the transaction expire (become due for commit), in jiffies?
-	 * [no locking]
-	 */
-	unsigned long		t_expires;
-
-	/*
-	 * When this transaction started, in nanoseconds [no locking]
-	 */
-	ktime_t			t_start_time;
-
-	/*
-	 * How many handles used this transaction? [t_handle_lock]
-	 */
-	int t_handle_count;
-
-	/*
-	 * This transaction is being forced and some process is
-	 * waiting for it to finish.
-	 */
-	unsigned int t_synchronous_commit:1;
-};
-
-/**
- * struct journal_s - this is the concrete type associated with journal_t.
- * @j_flags:  General journaling state flags
- * @j_errno:  Is there an outstanding uncleared error on the journal (from a
- *     prior abort)?
- * @j_sb_buffer: First part of superblock buffer
- * @j_superblock: Second part of superblock buffer
- * @j_format_version: Version of the superblock format
- * @j_state_lock: Protect the various scalars in the journal
- * @j_barrier_count:  Number of processes waiting to create a barrier lock
- * @j_running_transaction: The current running transaction..
- * @j_committing_transaction: the transaction we are pushing to disk
- * @j_checkpoint_transactions: a linked circular list of all transactions
- *  waiting for checkpointing
- * @j_wait_transaction_locked: Wait queue for waiting for a locked transaction
- *  to start committing, or for a barrier lock to be released
- * @j_wait_logspace: Wait queue for waiting for checkpointing to complete
- * @j_wait_done_commit: Wait queue for waiting for commit to complete
- * @j_wait_checkpoint:  Wait queue to trigger checkpointing
- * @j_wait_commit: Wait queue to trigger commit
- * @j_wait_updates: Wait queue to wait for updates to complete
- * @j_checkpoint_mutex: Mutex for locking against concurrent checkpoints
- * @j_head: Journal head - identifies the first unused block in the journal
- * @j_tail: Journal tail - identifies the oldest still-used block in the
- *  journal.
- * @j_free: Journal free - how many free blocks are there in the journal?
- * @j_first: The block number of the first usable block
- * @j_last: The block number one beyond the last usable block
- * @j_dev: Device where we store the journal
- * @j_blocksize: blocksize for the location where we store the journal.
- * @j_blk_offset: starting block offset for into the device where we store the
- *     journal
- * @j_fs_dev: Device which holds the client fs.  For internal journal this will
- *     be equal to j_dev
- * @j_maxlen: Total maximum capacity of the journal region on disk.
- * @j_list_lock: Protects the buffer lists and internal buffer state.
- * @j_inode: Optional inode where we store the journal.  If present, all journal
- *     block numbers are mapped into this inode via bmap().
- * @j_tail_sequence:  Sequence number of the oldest transaction in the log
- * @j_transaction_sequence: Sequence number of the next transaction to grant
- * @j_commit_sequence: Sequence number of the most recently committed
- *  transaction
- * @j_commit_request: Sequence number of the most recent transaction wanting
- *     commit
- * @j_uuid: Uuid of client object.
- * @j_task: Pointer to the current commit thread for this journal
- * @j_max_transaction_buffers:  Maximum number of metadata buffers to allow in a
- *     single compound commit transaction
- * @j_commit_interval: What is the maximum transaction lifetime before we begin
- *  a commit?
- * @j_commit_timer:  The timer used to wakeup the commit thread
- * @j_revoke_lock: Protect the revoke table
- * @j_revoke: The revoke table - maintains the list of revoked blocks in the
- *     current transaction.
- * @j_revoke_table: alternate revoke tables for j_revoke
- * @j_wbuf: array of buffer_heads for journal_commit_transaction
- * @j_wbufsize: maximum number of buffer_heads allowed in j_wbuf, the
- *	number that will fit in j_blocksize
- * @j_last_sync_writer: most recent pid which did a synchronous write
- * @j_average_commit_time: the average amount of time in nanoseconds it
- *	takes to commit a transaction to the disk.
- * @j_private: An opaque pointer to fs-private information.
- */
-
-struct journal_s
-{
-	/* General journaling state flags [j_state_lock] */
-	unsigned long		j_flags;
-
-	/*
-	 * Is there an outstanding uncleared error on the journal (from a prior
-	 * abort)? [j_state_lock]
-	 */
-	int			j_errno;
-
-	/* The superblock buffer */
-	struct buffer_head	*j_sb_buffer;
-	journal_superblock_t	*j_superblock;
-
-	/* Version of the superblock format */
-	int			j_format_version;
-
-	/*
-	 * Protect the various scalars in the journal
-	 */
-	spinlock_t		j_state_lock;
-
-	/*
-	 * Number of processes waiting to create a barrier lock [j_state_lock]
-	 */
-	int			j_barrier_count;
-
-	/*
-	 * Transactions: The current running transaction...
-	 * [j_state_lock] [caller holding open handle]
-	 */
-	transaction_t		*j_running_transaction;
-
-	/*
-	 * the transaction we are pushing to disk
-	 * [j_state_lock] [caller holding open handle]
-	 */
-	transaction_t		*j_committing_transaction;
-
-	/*
-	 * ... and a linked circular list of all transactions waiting for
-	 * checkpointing. [j_list_lock]
-	 */
-	transaction_t		*j_checkpoint_transactions;
-
-	/*
-	 * Wait queue for waiting for a locked transaction to start committing,
-	 * or for a barrier lock to be released
-	 */
-	wait_queue_head_t	j_wait_transaction_locked;
-
-	/* Wait queue for waiting for checkpointing to complete */
-	wait_queue_head_t	j_wait_logspace;
-
-	/* Wait queue for waiting for commit to complete */
-	wait_queue_head_t	j_wait_done_commit;
-
-	/* Wait queue to trigger checkpointing */
-	wait_queue_head_t	j_wait_checkpoint;
-
-	/* Wait queue to trigger commit */
-	wait_queue_head_t	j_wait_commit;
-
-	/* Wait queue to wait for updates to complete */
-	wait_queue_head_t	j_wait_updates;
-
-	/* Semaphore for locking against concurrent checkpoints */
-	struct mutex		j_checkpoint_mutex;
-
-	/*
-	 * Journal head: identifies the first unused block in the journal.
-	 * [j_state_lock]
-	 */
-	unsigned int		j_head;
-
-	/*
-	 * Journal tail: identifies the oldest still-used block in the journal.
-	 * [j_state_lock]
-	 */
-	unsigned int		j_tail;
-
-	/*
-	 * Journal free: how many free blocks are there in the journal?
-	 * [j_state_lock]
-	 */
-	unsigned int		j_free;
-
-	/*
-	 * Journal start and end: the block numbers of the first usable block
-	 * and one beyond the last usable block in the journal. [j_state_lock]
-	 */
-	unsigned int		j_first;
-	unsigned int		j_last;
-
-	/*
-	 * Device, blocksize and starting block offset for the location where we
-	 * store the journal.
-	 */
-	struct block_device	*j_dev;
-	int			j_blocksize;
-	unsigned int		j_blk_offset;
-
-	/*
-	 * Device which holds the client fs.  For internal journal this will be
-	 * equal to j_dev.
-	 */
-	struct block_device	*j_fs_dev;
-
-	/* Total maximum capacity of the journal region on disk. */
-	unsigned int		j_maxlen;
-
-	/*
-	 * Protects the buffer lists and internal buffer state.
-	 */
-	spinlock_t		j_list_lock;
-
-	/* Optional inode where we store the journal.  If present, all */
-	/* journal block numbers are mapped into this inode via */
-	/* bmap(). */
-	struct inode		*j_inode;
-
-	/*
-	 * Sequence number of the oldest transaction in the log [j_state_lock]
-	 */
-	tid_t			j_tail_sequence;
-
-	/*
-	 * Sequence number of the next transaction to grant [j_state_lock]
-	 */
-	tid_t			j_transaction_sequence;
-
-	/*
-	 * Sequence number of the most recently committed transaction
-	 * [j_state_lock].
-	 */
-	tid_t			j_commit_sequence;
-
-	/*
-	 * Sequence number of the most recent transaction wanting commit
-	 * [j_state_lock]
-	 */
-	tid_t			j_commit_request;
-
-	/*
-	 * Journal uuid: identifies the object (filesystem, LVM volume etc)
-	 * backed by this journal.  This will eventually be replaced by an array
-	 * of uuids, allowing us to index multiple devices within a single
-	 * journal and to perform atomic updates across them.
-	 */
-	__u8			j_uuid[16];
-
-	/* Pointer to the current commit thread for this journal */
-	struct task_struct	*j_task;
-
-	/*
-	 * Maximum number of metadata buffers to allow in a single compound
-	 * commit transaction
-	 */
-	int			j_max_transaction_buffers;
-
-	/*
-	 * What is the maximum transaction lifetime before we begin a commit?
-	 */
-	unsigned long		j_commit_interval;
-
-	/* The timer used to wakeup the commit thread: */
-	struct timer_list	j_commit_timer;
-
-	/*
-	 * The revoke table: maintains the list of revoked blocks in the
-	 * current transaction.  [j_revoke_lock]
-	 */
-	spinlock_t		j_revoke_lock;
-	struct jbd_revoke_table_s *j_revoke;
-	struct jbd_revoke_table_s *j_revoke_table[2];
-
-	/*
-	 * array of bhs for journal_commit_transaction
-	 */
-	struct buffer_head	**j_wbuf;
-	int			j_wbufsize;
-
-	/*
-	 * this is the pid of the last person to run a synchronous operation
-	 * through the journal.
-	 */
-	pid_t			j_last_sync_writer;
-
-	/*
-	 * the average amount of time in nanoseconds it takes to commit a
-	 * transaction to the disk.  [j_state_lock]
-	 */
-	u64			j_average_commit_time;
-
-	/*
-	 * An opaque pointer to fs-private information.  ext3 puts its
-	 * superblock pointer here
-	 */
-	void *j_private;
-};
-
-/*
- * Journal flag definitions
- */
-#define JFS_UNMOUNT	0x001	/* Journal thread is being destroyed */
-#define JFS_ABORT	0x002	/* Journaling has been aborted for errors. */
-#define JFS_ACK_ERR	0x004	/* The errno in the sb has been acked */
-#define JFS_FLUSHED	0x008	/* The journal superblock has been flushed */
-#define JFS_LOADED	0x010	/* The journal superblock has been loaded */
-#define JFS_BARRIER	0x020	/* Use IDE barriers */
-#define JFS_ABORT_ON_SYNCDATA_ERR	0x040  /* Abort the journal on file
-						* data write error in ordered
-						* mode */
-
-/*
- * Function declarations for the journaling transaction and buffer
- * management
- */
-
-/* Filing buffers */
-extern void journal_unfile_buffer(journal_t *, struct journal_head *);
-extern void __journal_unfile_buffer(struct journal_head *);
-extern void __journal_refile_buffer(struct journal_head *);
-extern void journal_refile_buffer(journal_t *, struct journal_head *);
-extern void __journal_file_buffer(struct journal_head *, transaction_t *, int);
-extern void __journal_free_buffer(struct journal_head *bh);
-extern void journal_file_buffer(struct journal_head *, transaction_t *, int);
-extern void __journal_clean_data_list(transaction_t *transaction);
-
-/* Log buffer allocation */
-extern struct journal_head * journal_get_descriptor_buffer(journal_t *);
-int journal_next_log_block(journal_t *, unsigned int *);
-
-/* Commit management */
-extern void journal_commit_transaction(journal_t *);
-
-/* Checkpoint list management */
-int __journal_clean_checkpoint_list(journal_t *journal);
-int __journal_remove_checkpoint(struct journal_head *);
-void __journal_insert_checkpoint(struct journal_head *, transaction_t *);
-
-/* Buffer IO */
-extern int
-journal_write_metadata_buffer(transaction_t	  *transaction,
-			      struct journal_head  *jh_in,
-			      struct journal_head **jh_out,
-			      unsigned int blocknr);
-
-/* Transaction locking */
-extern void		__wait_on_journal (journal_t *);
-
-/*
- * Journal locking.
- *
- * We need to lock the journal during transaction state changes so that nobody
- * ever tries to take a handle on the running transaction while we are in the
- * middle of moving it to the commit phase.  j_state_lock does this.
- *
- * Note that the locking is completely interrupt unsafe.  We never touch
- * journal structures from interrupts.
- */
-
-static inline handle_t *journal_current_handle(void)
-{
-	return current->journal_info;
-}
-
-/* The journaling code user interface:
- *
- * Create and destroy handles
- * Register buffer modifications against the current transaction.
- */
-
-extern handle_t *journal_start(journal_t *, int nblocks);
-extern int	 journal_restart (handle_t *, int nblocks);
-extern int	 journal_extend (handle_t *, int nblocks);
-extern int	 journal_get_write_access(handle_t *, struct buffer_head *);
-extern int	 journal_get_create_access (handle_t *, struct buffer_head *);
-extern int	 journal_get_undo_access(handle_t *, struct buffer_head *);
-extern int	 journal_dirty_data (handle_t *, struct buffer_head *);
-extern int	 journal_dirty_metadata (handle_t *, struct buffer_head *);
-extern void	 journal_release_buffer (handle_t *, struct buffer_head *);
-extern int	 journal_forget (handle_t *, struct buffer_head *);
-extern void	 journal_sync_buffer (struct buffer_head *);
-extern void	 journal_invalidatepage(journal_t *,
-				struct page *, unsigned long);
-extern int	 journal_try_to_free_buffers(journal_t *, struct page *, gfp_t);
-extern int	 journal_stop(handle_t *);
-extern int	 journal_flush (journal_t *);
-extern void	 journal_lock_updates (journal_t *);
-extern void	 journal_unlock_updates (journal_t *);
-
-extern journal_t * journal_init_dev(struct block_device *bdev,
-				struct block_device *fs_dev,
-				int start, int len, int bsize);
-extern journal_t * journal_init_inode (struct inode *);
-extern int	   journal_update_format (journal_t *);
-extern int	   journal_check_used_features
-		   (journal_t *, unsigned long, unsigned long, unsigned long);
-extern int	   journal_check_available_features
-		   (journal_t *, unsigned long, unsigned long, unsigned long);
-extern int	   journal_set_features
-		   (journal_t *, unsigned long, unsigned long, unsigned long);
-extern int	   journal_create     (journal_t *);
-extern int	   journal_load       (journal_t *journal);
-extern int	   journal_destroy    (journal_t *);
-extern int	   journal_recover    (journal_t *journal);
-extern int	   journal_wipe       (journal_t *, int);
-extern int	   journal_skip_recovery	(journal_t *);
-extern void	   journal_update_superblock	(journal_t *, int);
-extern void	   journal_abort      (journal_t *, int);
-extern int	   journal_errno      (journal_t *);
-extern void	   journal_ack_err    (journal_t *);
-extern int	   journal_clear_err  (journal_t *);
-extern int	   journal_bmap(journal_t *, unsigned int, unsigned int *);
-extern int	   journal_force_commit(journal_t *);
-
-/*
- * journal_head management
- */
-struct journal_head *journal_add_journal_head(struct buffer_head *bh);
-struct journal_head *journal_grab_journal_head(struct buffer_head *bh);
-void journal_put_journal_head(struct journal_head *jh);
-
-/*
- * handle management
- */
-extern struct kmem_cache *jbd_handle_cache;
-
-static inline handle_t *jbd_alloc_handle(gfp_t gfp_flags)
-{
-	return kmem_cache_alloc(jbd_handle_cache, gfp_flags);
-}
-
-static inline void jbd_free_handle(handle_t *handle)
-{
-	kmem_cache_free(jbd_handle_cache, handle);
-}
-
-/* Primary revoke support */
-#define JOURNAL_REVOKE_DEFAULT_HASH 256
-extern int	   journal_init_revoke(journal_t *, int);
-extern void	   journal_destroy_revoke_caches(void);
-extern int	   journal_init_revoke_caches(void);
-
-extern void	   journal_destroy_revoke(journal_t *);
-extern int	   journal_revoke (handle_t *,
-				unsigned int, struct buffer_head *);
-extern int	   journal_cancel_revoke(handle_t *, struct journal_head *);
-extern void	   journal_write_revoke_records(journal_t *,
-						transaction_t *, int);
-
-/* Recovery revoke support */
-extern int	journal_set_revoke(journal_t *, unsigned int, tid_t);
-extern int	journal_test_revoke(journal_t *, unsigned int, tid_t);
-extern void	journal_clear_revoke(journal_t *);
-extern void	journal_switch_revoke_table(journal_t *journal);
-extern void	journal_clear_buffer_revoked_flags(journal_t *journal);
-
-/*
- * The log thread user interface:
- *
- * Request space in the current transaction, and force transaction commit
- * transitions on demand.
- */
-
-int __log_space_left(journal_t *); /* Called with journal locked */
-int log_start_commit(journal_t *journal, tid_t tid);
-int __log_start_commit(journal_t *journal, tid_t tid);
-int journal_start_commit(journal_t *journal, tid_t *tid);
-int journal_force_commit_nested(journal_t *journal);
-int log_wait_commit(journal_t *journal, tid_t tid);
-int log_do_checkpoint(journal_t *journal);
-int journal_trans_will_send_data_barrier(journal_t *journal, tid_t tid);
-
-void __log_wait_for_space(journal_t *journal);
-extern void	__journal_drop_transaction(journal_t *, transaction_t *);
-extern int	cleanup_journal_tail(journal_t *);
-
-/* Debugging code only: */
-
-#define jbd_ENOSYS() \
-do {								           \
-	printk (KERN_ERR "JBD unimplemented function %s\n", __func__); \
-	current->state = TASK_UNINTERRUPTIBLE;			           \
-	schedule();						           \
-} while (1)
-
-/*
- * is_journal_abort
- *
- * Simple test wrapper function to test the JFS_ABORT state flag.  This
- * bit, when set, indicates that we have had a fatal error somewhere,
- * either inside the journaling layer or indicated to us by the client
- * (eg. ext3), and that we and should not commit any further
- * transactions.
- */
-
-static inline int is_journal_aborted(journal_t *journal)
-{
-	return journal->j_flags & JFS_ABORT;
-}
-
-static inline int is_handle_aborted(handle_t *handle)
-{
-	if (handle->h_aborted)
-		return 1;
-	return is_journal_aborted(handle->h_transaction->t_journal);
-}
-
-static inline void journal_abort_handle(handle_t *handle)
-{
-	handle->h_aborted = 1;
-}
-
-#endif /* __KERNEL__   */
-
-/* Comparison functions for transaction IDs: perform comparisons using
- * modulo arithmetic so that they work over sequence number wraps. */
-
-static inline int tid_gt(tid_t x, tid_t y)
-{
-	int difference = (x - y);
-	return (difference > 0);
-}
-
-static inline int tid_geq(tid_t x, tid_t y)
-{
-	int difference = (x - y);
-	return (difference >= 0);
-}
-
-extern int journal_blocks_per_page(struct inode *inode);
-
-/*
- * Return the minimum number of blocks which must be free in the journal
- * before a new transaction may be started.  Must be called under j_state_lock.
- */
-static inline int jbd_space_needed(journal_t *journal)
-{
-	int nblocks = journal->j_max_transaction_buffers;
-	if (journal->j_committing_transaction)
-		nblocks += journal->j_committing_transaction->
-					t_outstanding_credits;
-	return nblocks;
-}
-
-/*
- * Definitions which augment the buffer_head layer
- */
-
-/* journaling buffer types */
-#define BJ_None		0	/* Not journaled */
-#define BJ_SyncData	1	/* Normal data: flush before commit */
-#define BJ_Metadata	2	/* Normal journaled metadata */
-#define BJ_Forget	3	/* Buffer superseded by this transaction */
-#define BJ_IO		4	/* Buffer is for temporary IO use */
-#define BJ_Shadow	5	/* Buffer contents being shadowed to the log */
-#define BJ_LogCtl	6	/* Buffer contains log descriptors */
-#define BJ_Reserved	7	/* Buffer is reserved for access by journal */
-#define BJ_Locked	8	/* Locked for I/O during commit */
-#define BJ_Types	9
-
-extern int jbd_blocks_per_page(struct inode *inode);
-
-#ifdef __KERNEL__
-
-#define buffer_trace_init(bh)	do {} while (0)
-#define print_buffer_fields(bh)	do {} while (0)
-#define print_buffer_trace(bh)	do {} while (0)
-#define BUFFER_TRACE(bh, info)	do {} while (0)
-#define BUFFER_TRACE2(bh, bh2, info)	do {} while (0)
-#define JBUFFER_TRACE(jh, info)	do {} while (0)
-
-#endif	/* __KERNEL__ */
-
-#endif	/* _LINUX_JBD_H */
diff --git a/ANDROID_3.4.5/include/linux/jbd2.h b/ANDROID_3.4.5/include/linux/jbd2.h
deleted file mode 100644
index 912c30a8..00000000
--- a/ANDROID_3.4.5/include/linux/jbd2.h
+++ /dev/null
@@ -1,1282 +0,0 @@
-/*
- * linux/include/linux/jbd2.h
- *
- * Written by Stephen C. Tweedie <sct@redhat.com>
- *
- * Copyright 1998-2000 Red Hat, Inc --- All Rights Reserved
- *
- * This file is part of the Linux kernel and is made available under
- * the terms of the GNU General Public License, version 2, or at your
- * option, any later version, incorporated herein by reference.
- *
- * Definitions for transaction data structures for the buffer cache
- * filesystem journaling support.
- */
-
-#ifndef _LINUX_JBD2_H
-#define _LINUX_JBD2_H
-
-/* Allow this file to be included directly into e2fsprogs */
-#ifndef __KERNEL__
-#include "jfs_compat.h"
-#define JBD2_DEBUG
-#define jfs_debug jbd_debug
-#else
-
-#include <linux/types.h>
-#include <linux/buffer_head.h>
-#include <linux/journal-head.h>
-#include <linux/stddef.h>
-#include <linux/bit_spinlock.h>
-#include <linux/mutex.h>
-#include <linux/timer.h>
-#include <linux/slab.h>
-#endif
-
-#define journal_oom_retry 1
-
-/*
- * Define JBD2_PARANIOD_IOFAIL to cause a kernel BUG() if ext4 finds
- * certain classes of error which can occur due to failed IOs.  Under
- * normal use we want ext4 to continue after such errors, because
- * hardware _can_ fail, but for debugging purposes when running tests on
- * known-good hardware we may want to trap these errors.
- */
-#undef JBD2_PARANOID_IOFAIL
-
-/*
- * The default maximum commit age, in seconds.
- */
-#define JBD2_DEFAULT_MAX_COMMIT_AGE 5
-
-#ifdef CONFIG_JBD2_DEBUG
-/*
- * Define JBD2_EXPENSIVE_CHECKING to enable more expensive internal
- * consistency checks.  By default we don't do this unless
- * CONFIG_JBD2_DEBUG is on.
- */
-#define JBD2_EXPENSIVE_CHECKING
-extern u8 jbd2_journal_enable_debug;
-
-#define jbd_debug(n, f, a...)						\
-	do {								\
-		if ((n) <= jbd2_journal_enable_debug) {			\
-			printk (KERN_DEBUG "(%s, %d): %s: ",		\
-				__FILE__, __LINE__, __func__);	\
-			printk (f, ## a);				\
-		}							\
-	} while (0)
-#else
-#define jbd_debug(f, a...)	/**/
-#endif
-
-extern void *jbd2_alloc(size_t size, gfp_t flags);
-extern void jbd2_free(void *ptr, size_t size);
-
-#define JBD2_MIN_JOURNAL_BLOCKS 1024
-
-#ifdef __KERNEL__
-
-/**
- * typedef handle_t - The handle_t type represents a single atomic update being performed by some process.
- *
- * All filesystem modifications made by the process go
- * through this handle.  Recursive operations (such as quota operations)
- * are gathered into a single update.
- *
- * The buffer credits field is used to account for journaled buffers
- * being modified by the running process.  To ensure that there is
- * enough log space for all outstanding operations, we need to limit the
- * number of outstanding buffers possible at any time.  When the
- * operation completes, any buffer credits not used are credited back to
- * the transaction, so that at all times we know how many buffers the
- * outstanding updates on a transaction might possibly touch.
- *
- * This is an opaque datatype.
- **/
-typedef struct jbd2_journal_handle handle_t;	/* Atomic operation type */
-
-
-/**
- * typedef journal_t - The journal_t maintains all of the journaling state information for a single filesystem.
- *
- * journal_t is linked to from the fs superblock structure.
- *
- * We use the journal_t to keep track of all outstanding transaction
- * activity on the filesystem, and to manage the state of the log
- * writing process.
- *
- * This is an opaque datatype.
- **/
-typedef struct journal_s	journal_t;	/* Journal control structure */
-#endif
-
-/*
- * Internal structures used by the logging mechanism:
- */
-
-#define JBD2_MAGIC_NUMBER 0xc03b3998U /* The first 4 bytes of /dev/random! */
-
-/*
- * On-disk structures
- */
-
-/*
- * Descriptor block types:
- */
-
-#define JBD2_DESCRIPTOR_BLOCK	1
-#define JBD2_COMMIT_BLOCK	2
-#define JBD2_SUPERBLOCK_V1	3
-#define JBD2_SUPERBLOCK_V2	4
-#define JBD2_REVOKE_BLOCK	5
-
-/*
- * Standard header for all descriptor blocks:
- */
-typedef struct journal_header_s
-{
-	__be32		h_magic;
-	__be32		h_blocktype;
-	__be32		h_sequence;
-} journal_header_t;
-
-/*
- * Checksum types.
- */
-#define JBD2_CRC32_CHKSUM   1
-#define JBD2_MD5_CHKSUM     2
-#define JBD2_SHA1_CHKSUM    3
-
-#define JBD2_CRC32_CHKSUM_SIZE 4
-
-#define JBD2_CHECKSUM_BYTES (32 / sizeof(u32))
-/*
- * Commit block header for storing transactional checksums:
- */
-struct commit_header {
-	__be32		h_magic;
-	__be32          h_blocktype;
-	__be32          h_sequence;
-	unsigned char   h_chksum_type;
-	unsigned char   h_chksum_size;
-	unsigned char 	h_padding[2];
-	__be32 		h_chksum[JBD2_CHECKSUM_BYTES];
-	__be64		h_commit_sec;
-	__be32		h_commit_nsec;
-};
-
-/*
- * The block tag: used to describe a single buffer in the journal.
- * t_blocknr_high is only used if INCOMPAT_64BIT is set, so this
- * raw struct shouldn't be used for pointer math or sizeof() - use
- * journal_tag_bytes(journal) instead to compute this.
- */
-typedef struct journal_block_tag_s
-{
-	__be32		t_blocknr;	/* The on-disk block number */
-	__be32		t_flags;	/* See below */
-	__be32		t_blocknr_high; /* most-significant high 32bits. */
-} journal_block_tag_t;
-
-#define JBD2_TAG_SIZE32 (offsetof(journal_block_tag_t, t_blocknr_high))
-#define JBD2_TAG_SIZE64 (sizeof(journal_block_tag_t))
-
-/*
- * The revoke descriptor: used on disk to describe a series of blocks to
- * be revoked from the log
- */
-typedef struct jbd2_journal_revoke_header_s
-{
-	journal_header_t r_header;
-	__be32		 r_count;	/* Count of bytes used in the block */
-} jbd2_journal_revoke_header_t;
-
-
-/* Definitions for the journal tag flags word: */
-#define JBD2_FLAG_ESCAPE		1	/* on-disk block is escaped */
-#define JBD2_FLAG_SAME_UUID	2	/* block has same uuid as previous */
-#define JBD2_FLAG_DELETED	4	/* block deleted by this transaction */
-#define JBD2_FLAG_LAST_TAG	8	/* last tag in this descriptor block */
-
-
-/*
- * The journal superblock.  All fields are in big-endian byte order.
- */
-typedef struct journal_superblock_s
-{
-/* 0x0000 */
-	journal_header_t s_header;
-
-/* 0x000C */
-	/* Static information describing the journal */
-	__be32	s_blocksize;		/* journal device blocksize */
-	__be32	s_maxlen;		/* total blocks in journal file */
-	__be32	s_first;		/* first block of log information */
-
-/* 0x0018 */
-	/* Dynamic information describing the current state of the log */
-	__be32	s_sequence;		/* first commit ID expected in log */
-	__be32	s_start;		/* blocknr of start of log */
-
-/* 0x0020 */
-	/* Error value, as set by jbd2_journal_abort(). */
-	__be32	s_errno;
-
-/* 0x0024 */
-	/* Remaining fields are only valid in a version-2 superblock */
-	__be32	s_feature_compat;	/* compatible feature set */
-	__be32	s_feature_incompat;	/* incompatible feature set */
-	__be32	s_feature_ro_compat;	/* readonly-compatible feature set */
-/* 0x0030 */
-	__u8	s_uuid[16];		/* 128-bit uuid for journal */
-
-/* 0x0040 */
-	__be32	s_nr_users;		/* Nr of filesystems sharing log */
-
-	__be32	s_dynsuper;		/* Blocknr of dynamic superblock copy*/
-
-/* 0x0048 */
-	__be32	s_max_transaction;	/* Limit of journal blocks per trans.*/
-	__be32	s_max_trans_data;	/* Limit of data blocks per trans. */
-
-/* 0x0050 */
-	__u32	s_padding[44];
-
-/* 0x0100 */
-	__u8	s_users[16*48];		/* ids of all fs'es sharing the log */
-/* 0x0400 */
-} journal_superblock_t;
-
-#define JBD2_HAS_COMPAT_FEATURE(j,mask)					\
-	((j)->j_format_version >= 2 &&					\
-	 ((j)->j_superblock->s_feature_compat & cpu_to_be32((mask))))
-#define JBD2_HAS_RO_COMPAT_FEATURE(j,mask)				\
-	((j)->j_format_version >= 2 &&					\
-	 ((j)->j_superblock->s_feature_ro_compat & cpu_to_be32((mask))))
-#define JBD2_HAS_INCOMPAT_FEATURE(j,mask)				\
-	((j)->j_format_version >= 2 &&					\
-	 ((j)->j_superblock->s_feature_incompat & cpu_to_be32((mask))))
-
-#define JBD2_FEATURE_COMPAT_CHECKSUM	0x00000001
-
-#define JBD2_FEATURE_INCOMPAT_REVOKE		0x00000001
-#define JBD2_FEATURE_INCOMPAT_64BIT		0x00000002
-#define JBD2_FEATURE_INCOMPAT_ASYNC_COMMIT	0x00000004
-
-/* Features known to this kernel version: */
-#define JBD2_KNOWN_COMPAT_FEATURES	JBD2_FEATURE_COMPAT_CHECKSUM
-#define JBD2_KNOWN_ROCOMPAT_FEATURES	0
-#define JBD2_KNOWN_INCOMPAT_FEATURES	(JBD2_FEATURE_INCOMPAT_REVOKE | \
-					JBD2_FEATURE_INCOMPAT_64BIT | \
-					JBD2_FEATURE_INCOMPAT_ASYNC_COMMIT)
-
-#ifdef __KERNEL__
-
-#include <linux/fs.h>
-#include <linux/sched.h>
-#include <linux/jbd_common.h>
-
-#define J_ASSERT(assert)	BUG_ON(!(assert))
-
-#define J_ASSERT_BH(bh, expr)	J_ASSERT(expr)
-#define J_ASSERT_JH(jh, expr)	J_ASSERT(expr)
-
-#if defined(JBD2_PARANOID_IOFAIL)
-#define J_EXPECT(expr, why...)		J_ASSERT(expr)
-#define J_EXPECT_BH(bh, expr, why...)	J_ASSERT_BH(bh, expr)
-#define J_EXPECT_JH(jh, expr, why...)	J_ASSERT_JH(jh, expr)
-#else
-#define __journal_expect(expr, why...)					     \
-	({								     \
-		int val = (expr);					     \
-		if (!val) {						     \
-			printk(KERN_ERR					     \
-			       "JBD2 unexpected failure: %s: %s;\n",	     \
-			       __func__, #expr);			     \
-			printk(KERN_ERR why "\n");			     \
-		}							     \
-		val;							     \
-	})
-#define J_EXPECT(expr, why...)		__journal_expect(expr, ## why)
-#define J_EXPECT_BH(bh, expr, why...)	__journal_expect(expr, ## why)
-#define J_EXPECT_JH(jh, expr, why...)	__journal_expect(expr, ## why)
-#endif
-
-/* Flags in jbd_inode->i_flags */
-#define __JI_COMMIT_RUNNING 0
-/* Commit of the inode data in progress. We use this flag to protect us from
- * concurrent deletion of inode. We cannot use reference to inode for this
- * since we cannot afford doing last iput() on behalf of kjournald
- */
-#define JI_COMMIT_RUNNING (1 << __JI_COMMIT_RUNNING)
-
-/**
- * struct jbd_inode is the structure linking inodes in ordered mode
- *   present in a transaction so that we can sync them during commit.
- */
-struct jbd2_inode {
-	/* Which transaction does this inode belong to? Either the running
-	 * transaction or the committing one. [j_list_lock] */
-	transaction_t *i_transaction;
-
-	/* Pointer to the running transaction modifying inode's data in case
-	 * there is already a committing transaction touching it. [j_list_lock] */
-	transaction_t *i_next_transaction;
-
-	/* List of inodes in the i_transaction [j_list_lock] */
-	struct list_head i_list;
-
-	/* VFS inode this inode belongs to [constant during the lifetime
-	 * of the structure] */
-	struct inode *i_vfs_inode;
-
-	/* Flags of inode [j_list_lock] */
-	unsigned long i_flags;
-};
-
-struct jbd2_revoke_table_s;
-
-/**
- * struct handle_s - The handle_s type is the concrete type associated with
- *     handle_t.
- * @h_transaction: Which compound transaction is this update a part of?
- * @h_buffer_credits: Number of remaining buffers we are allowed to dirty.
- * @h_ref: Reference count on this handle
- * @h_err: Field for caller's use to track errors through large fs operations
- * @h_sync: flag for sync-on-close
- * @h_jdata: flag to force data journaling
- * @h_aborted: flag indicating fatal error on handle
- **/
-
-/* Docbook can't yet cope with the bit fields, but will leave the documentation
- * in so it can be fixed later.
- */
-
-struct jbd2_journal_handle
-{
-	/* Which compound transaction is this update a part of? */
-	transaction_t		*h_transaction;
-
-	/* Number of remaining buffers we are allowed to dirty: */
-	int			h_buffer_credits;
-
-	/* Reference count on this handle */
-	int			h_ref;
-
-	/* Field for caller's use to track errors through large fs */
-	/* operations */
-	int			h_err;
-
-	/* Flags [no locking] */
-	unsigned int	h_sync:1;	/* sync-on-close */
-	unsigned int	h_jdata:1;	/* force data journaling */
-	unsigned int	h_aborted:1;	/* fatal error on handle */
-	unsigned int	h_cowing:1;	/* COWing block to snapshot */
-
-	/* Number of buffers requested by user:
-	 * (before adding the COW credits factor) */
-	unsigned int	h_base_credits:14;
-
-	/* Number of buffers the user is allowed to dirty:
-	 * (counts only buffers dirtied when !h_cowing) */
-	unsigned int	h_user_credits:14;
-
-
-#ifdef CONFIG_DEBUG_LOCK_ALLOC
-	struct lockdep_map	h_lockdep_map;
-#endif
-
-#ifdef CONFIG_JBD2_DEBUG
-	/* COW debugging counters: */
-	unsigned int h_cow_moved; /* blocks moved to snapshot */
-	unsigned int h_cow_copied; /* blocks copied to snapshot */
-	unsigned int h_cow_ok_jh; /* blocks already COWed during current
-				     transaction */
-	unsigned int h_cow_ok_bitmap; /* blocks not set in COW bitmap */
-	unsigned int h_cow_ok_mapped;/* blocks already mapped in snapshot */
-	unsigned int h_cow_bitmaps; /* COW bitmaps created */
-	unsigned int h_cow_excluded; /* blocks set in exclude bitmap */
-#endif
-};
-
-
-/*
- * Some stats for checkpoint phase
- */
-struct transaction_chp_stats_s {
-	unsigned long		cs_chp_time;
-	__u32			cs_forced_to_close;
-	__u32			cs_written;
-	__u32			cs_dropped;
-};
-
-/* The transaction_t type is the guts of the journaling mechanism.  It
- * tracks a compound transaction through its various states:
- *
- * RUNNING:	accepting new updates
- * LOCKED:	Updates still running but we don't accept new ones
- * RUNDOWN:	Updates are tidying up but have finished requesting
- *		new buffers to modify (state not used for now)
- * FLUSH:       All updates complete, but we are still writing to disk
- * COMMIT:      All data on disk, writing commit record
- * FINISHED:	We still have to keep the transaction for checkpointing.
- *
- * The transaction keeps track of all of the buffers modified by a
- * running transaction, and all of the buffers committed but not yet
- * flushed to home for finished transactions.
- */
-
-/*
- * Lock ranking:
- *
- *    j_list_lock
- *      ->jbd_lock_bh_journal_head()	(This is "innermost")
- *
- *    j_state_lock
- *    ->jbd_lock_bh_state()
- *
- *    jbd_lock_bh_state()
- *    ->j_list_lock
- *
- *    j_state_lock
- *    ->t_handle_lock
- *
- *    j_state_lock
- *    ->j_list_lock			(journal_unmap_buffer)
- *
- */
-
-struct transaction_s
-{
-	/* Pointer to the journal for this transaction. [no locking] */
-	journal_t		*t_journal;
-
-	/* Sequence number for this transaction [no locking] */
-	tid_t			t_tid;
-
-	/*
-	 * Transaction's current state
-	 * [no locking - only kjournald2 alters this]
-	 * [j_list_lock] guards transition of a transaction into T_FINISHED
-	 * state and subsequent call of __jbd2_journal_drop_transaction()
-	 * FIXME: needs barriers
-	 * KLUDGE: [use j_state_lock]
-	 */
-	enum {
-		T_RUNNING,
-		T_LOCKED,
-		T_FLUSH,
-		T_COMMIT,
-		T_COMMIT_DFLUSH,
-		T_COMMIT_JFLUSH,
-		T_FINISHED
-	}			t_state;
-
-	/*
-	 * Where in the log does this transaction's commit start? [no locking]
-	 */
-	unsigned long		t_log_start;
-
-	/* Number of buffers on the t_buffers list [j_list_lock] */
-	int			t_nr_buffers;
-
-	/*
-	 * Doubly-linked circular list of all buffers reserved but not yet
-	 * modified by this transaction [j_list_lock]
-	 */
-	struct journal_head	*t_reserved_list;
-
-	/*
-	 * Doubly-linked circular list of all metadata buffers owned by this
-	 * transaction [j_list_lock]
-	 */
-	struct journal_head	*t_buffers;
-
-	/*
-	 * Doubly-linked circular list of all forget buffers (superseded
-	 * buffers which we can un-checkpoint once this transaction commits)
-	 * [j_list_lock]
-	 */
-	struct journal_head	*t_forget;
-
-	/*
-	 * Doubly-linked circular list of all buffers still to be flushed before
-	 * this transaction can be checkpointed. [j_list_lock]
-	 */
-	struct journal_head	*t_checkpoint_list;
-
-	/*
-	 * Doubly-linked circular list of all buffers submitted for IO while
-	 * checkpointing. [j_list_lock]
-	 */
-	struct journal_head	*t_checkpoint_io_list;
-
-	/*
-	 * Doubly-linked circular list of temporary buffers currently undergoing
-	 * IO in the log [j_list_lock]
-	 */
-	struct journal_head	*t_iobuf_list;
-
-	/*
-	 * Doubly-linked circular list of metadata buffers being shadowed by log
-	 * IO.  The IO buffers on the iobuf list and the shadow buffers on this
-	 * list match each other one for one at all times. [j_list_lock]
-	 */
-	struct journal_head	*t_shadow_list;
-
-	/*
-	 * Doubly-linked circular list of control buffers being written to the
-	 * log. [j_list_lock]
-	 */
-	struct journal_head	*t_log_list;
-
-	/*
-	 * List of inodes whose data we've modified in data=ordered mode.
-	 * [j_list_lock]
-	 */
-	struct list_head	t_inode_list;
-
-	/*
-	 * Protects info related to handles
-	 */
-	spinlock_t		t_handle_lock;
-
-	/*
-	 * Longest time some handle had to wait for running transaction
-	 */
-	unsigned long		t_max_wait;
-
-	/*
-	 * When transaction started
-	 */
-	unsigned long		t_start;
-
-	/*
-	 * Checkpointing stats [j_checkpoint_sem]
-	 */
-	struct transaction_chp_stats_s t_chp_stats;
-
-	/*
-	 * Number of outstanding updates running on this transaction
-	 * [t_handle_lock]
-	 */
-	atomic_t		t_updates;
-
-	/*
-	 * Number of buffers reserved for use by all handles in this transaction
-	 * handle but not yet modified. [t_handle_lock]
-	 */
-	atomic_t		t_outstanding_credits;
-
-	/*
-	 * Forward and backward links for the circular list of all transactions
-	 * awaiting checkpoint. [j_list_lock]
-	 */
-	transaction_t		*t_cpnext, *t_cpprev;
-
-	/*
-	 * When will the transaction expire (become due for commit), in jiffies?
-	 * [no locking]
-	 */
-	unsigned long		t_expires;
-
-	/*
-	 * When this transaction started, in nanoseconds [no locking]
-	 */
-	ktime_t			t_start_time;
-
-	/*
-	 * How many handles used this transaction? [t_handle_lock]
-	 */
-	atomic_t		t_handle_count;
-
-	/*
-	 * This transaction is being forced and some process is
-	 * waiting for it to finish.
-	 */
-	unsigned int t_synchronous_commit:1;
-
-	/* Disk flush needs to be sent to fs partition [no locking] */
-	int			t_need_data_flush;
-
-	/*
-	 * For use by the filesystem to store fs-specific data
-	 * structures associated with the transaction
-	 */
-	struct list_head	t_private_list;
-};
-
-struct transaction_run_stats_s {
-	unsigned long		rs_wait;
-	unsigned long		rs_running;
-	unsigned long		rs_locked;
-	unsigned long		rs_flushing;
-	unsigned long		rs_logging;
-
-	__u32			rs_handle_count;
-	__u32			rs_blocks;
-	__u32			rs_blocks_logged;
-};
-
-struct transaction_stats_s {
-	unsigned long		ts_tid;
-	struct transaction_run_stats_s run;
-};
-
-static inline unsigned long
-jbd2_time_diff(unsigned long start, unsigned long end)
-{
-	if (end >= start)
-		return end - start;
-
-	return end + (MAX_JIFFY_OFFSET - start);
-}
-
-#define JBD2_NR_BATCH	64
-
-/**
- * struct journal_s - The journal_s type is the concrete type associated with
- *     journal_t.
- * @j_flags:  General journaling state flags
- * @j_errno:  Is there an outstanding uncleared error on the journal (from a
- *     prior abort)?
- * @j_sb_buffer: First part of superblock buffer
- * @j_superblock: Second part of superblock buffer
- * @j_format_version: Version of the superblock format
- * @j_state_lock: Protect the various scalars in the journal
- * @j_barrier_count:  Number of processes waiting to create a barrier lock
- * @j_barrier: The barrier lock itself
- * @j_running_transaction: The current running transaction..
- * @j_committing_transaction: the transaction we are pushing to disk
- * @j_checkpoint_transactions: a linked circular list of all transactions
- *  waiting for checkpointing
- * @j_wait_transaction_locked: Wait queue for waiting for a locked transaction
- *  to start committing, or for a barrier lock to be released
- * @j_wait_logspace: Wait queue for waiting for checkpointing to complete
- * @j_wait_done_commit: Wait queue for waiting for commit to complete
- * @j_wait_checkpoint:  Wait queue to trigger checkpointing
- * @j_wait_commit: Wait queue to trigger commit
- * @j_wait_updates: Wait queue to wait for updates to complete
- * @j_checkpoint_mutex: Mutex for locking against concurrent checkpoints
- * @j_head: Journal head - identifies the first unused block in the journal
- * @j_tail: Journal tail - identifies the oldest still-used block in the
- *  journal.
- * @j_free: Journal free - how many free blocks are there in the journal?
- * @j_first: The block number of the first usable block
- * @j_last: The block number one beyond the last usable block
- * @j_dev: Device where we store the journal
- * @j_blocksize: blocksize for the location where we store the journal.
- * @j_blk_offset: starting block offset for into the device where we store the
- *     journal
- * @j_fs_dev: Device which holds the client fs.  For internal journal this will
- *     be equal to j_dev
- * @j_maxlen: Total maximum capacity of the journal region on disk.
- * @j_list_lock: Protects the buffer lists and internal buffer state.
- * @j_inode: Optional inode where we store the journal.  If present, all journal
- *     block numbers are mapped into this inode via bmap().
- * @j_tail_sequence:  Sequence number of the oldest transaction in the log
- * @j_transaction_sequence: Sequence number of the next transaction to grant
- * @j_commit_sequence: Sequence number of the most recently committed
- *  transaction
- * @j_commit_request: Sequence number of the most recent transaction wanting
- *     commit
- * @j_uuid: Uuid of client object.
- * @j_task: Pointer to the current commit thread for this journal
- * @j_max_transaction_buffers:  Maximum number of metadata buffers to allow in a
- *     single compound commit transaction
- * @j_commit_interval: What is the maximum transaction lifetime before we begin
- *  a commit?
- * @j_commit_timer:  The timer used to wakeup the commit thread
- * @j_revoke_lock: Protect the revoke table
- * @j_revoke: The revoke table - maintains the list of revoked blocks in the
- *     current transaction.
- * @j_revoke_table: alternate revoke tables for j_revoke
- * @j_wbuf: array of buffer_heads for jbd2_journal_commit_transaction
- * @j_wbufsize: maximum number of buffer_heads allowed in j_wbuf, the
- *	number that will fit in j_blocksize
- * @j_last_sync_writer: most recent pid which did a synchronous write
- * @j_history: Buffer storing the transactions statistics history
- * @j_history_max: Maximum number of transactions in the statistics history
- * @j_history_cur: Current number of transactions in the statistics history
- * @j_history_lock: Protect the transactions statistics history
- * @j_proc_entry: procfs entry for the jbd statistics directory
- * @j_stats: Overall statistics
- * @j_private: An opaque pointer to fs-private information.
- */
-
-struct journal_s
-{
-	/* General journaling state flags [j_state_lock] */
-	unsigned long		j_flags;
-
-	/*
-	 * Is there an outstanding uncleared error on the journal (from a prior
-	 * abort)? [j_state_lock]
-	 */
-	int			j_errno;
-
-	/* The superblock buffer */
-	struct buffer_head	*j_sb_buffer;
-	journal_superblock_t	*j_superblock;
-
-	/* Version of the superblock format */
-	int			j_format_version;
-
-	/*
-	 * Protect the various scalars in the journal
-	 */
-	rwlock_t		j_state_lock;
-
-	/*
-	 * Number of processes waiting to create a barrier lock [j_state_lock]
-	 */
-	int			j_barrier_count;
-
-	/* The barrier lock itself */
-	struct mutex		j_barrier;
-
-	/*
-	 * Transactions: The current running transaction...
-	 * [j_state_lock] [caller holding open handle]
-	 */
-	transaction_t		*j_running_transaction;
-
-	/*
-	 * the transaction we are pushing to disk
-	 * [j_state_lock] [caller holding open handle]
-	 */
-	transaction_t		*j_committing_transaction;
-
-	/*
-	 * ... and a linked circular list of all transactions waiting for
-	 * checkpointing. [j_list_lock]
-	 */
-	transaction_t		*j_checkpoint_transactions;
-
-	/*
-	 * Wait queue for waiting for a locked transaction to start committing,
-	 * or for a barrier lock to be released
-	 */
-	wait_queue_head_t	j_wait_transaction_locked;
-
-	/* Wait queue for waiting for checkpointing to complete */
-	wait_queue_head_t	j_wait_logspace;
-
-	/* Wait queue for waiting for commit to complete */
-	wait_queue_head_t	j_wait_done_commit;
-
-	/* Wait queue to trigger checkpointing */
-	wait_queue_head_t	j_wait_checkpoint;
-
-	/* Wait queue to trigger commit */
-	wait_queue_head_t	j_wait_commit;
-
-	/* Wait queue to wait for updates to complete */
-	wait_queue_head_t	j_wait_updates;
-
-	/* Semaphore for locking against concurrent checkpoints */
-	struct mutex		j_checkpoint_mutex;
-
-	/*
-	 * List of buffer heads used by the checkpoint routine.  This
-	 * was moved from jbd2_log_do_checkpoint() to reduce stack
-	 * usage.  Access to this array is controlled by the
-	 * j_checkpoint_mutex.  [j_checkpoint_mutex]
-	 */
-	struct buffer_head	*j_chkpt_bhs[JBD2_NR_BATCH];
-	
-	/*
-	 * Journal head: identifies the first unused block in the journal.
-	 * [j_state_lock]
-	 */
-	unsigned long		j_head;
-
-	/*
-	 * Journal tail: identifies the oldest still-used block in the journal.
-	 * [j_state_lock]
-	 */
-	unsigned long		j_tail;
-
-	/*
-	 * Journal free: how many free blocks are there in the journal?
-	 * [j_state_lock]
-	 */
-	unsigned long		j_free;
-
-	/*
-	 * Journal start and end: the block numbers of the first usable block
-	 * and one beyond the last usable block in the journal. [j_state_lock]
-	 */
-	unsigned long		j_first;
-	unsigned long		j_last;
-
-	/*
-	 * Device, blocksize and starting block offset for the location where we
-	 * store the journal.
-	 */
-	struct block_device	*j_dev;
-	int			j_blocksize;
-	unsigned long long	j_blk_offset;
-	char			j_devname[BDEVNAME_SIZE+24];
-
-	/*
-	 * Device which holds the client fs.  For internal journal this will be
-	 * equal to j_dev.
-	 */
-	struct block_device	*j_fs_dev;
-
-	/* Total maximum capacity of the journal region on disk. */
-	unsigned int		j_maxlen;
-
-	/*
-	 * Protects the buffer lists and internal buffer state.
-	 */
-	spinlock_t		j_list_lock;
-
-	/* Optional inode where we store the journal.  If present, all */
-	/* journal block numbers are mapped into this inode via */
-	/* bmap(). */
-	struct inode		*j_inode;
-
-	/*
-	 * Sequence number of the oldest transaction in the log [j_state_lock]
-	 */
-	tid_t			j_tail_sequence;
-
-	/*
-	 * Sequence number of the next transaction to grant [j_state_lock]
-	 */
-	tid_t			j_transaction_sequence;
-
-	/*
-	 * Sequence number of the most recently committed transaction
-	 * [j_state_lock].
-	 */
-	tid_t			j_commit_sequence;
-
-	/*
-	 * Sequence number of the most recent transaction wanting commit
-	 * [j_state_lock]
-	 */
-	tid_t			j_commit_request;
-
-	/*
-	 * Journal uuid: identifies the object (filesystem, LVM volume etc)
-	 * backed by this journal.  This will eventually be replaced by an array
-	 * of uuids, allowing us to index multiple devices within a single
-	 * journal and to perform atomic updates across them.
-	 */
-	__u8			j_uuid[16];
-
-	/* Pointer to the current commit thread for this journal */
-	struct task_struct	*j_task;
-
-	/*
-	 * Maximum number of metadata buffers to allow in a single compound
-	 * commit transaction
-	 */
-	int			j_max_transaction_buffers;
-
-	/*
-	 * What is the maximum transaction lifetime before we begin a commit?
-	 */
-	unsigned long		j_commit_interval;
-
-	/* The timer used to wakeup the commit thread: */
-	struct timer_list	j_commit_timer;
-
-	/*
-	 * The revoke table: maintains the list of revoked blocks in the
-	 * current transaction.  [j_revoke_lock]
-	 */
-	spinlock_t		j_revoke_lock;
-	struct jbd2_revoke_table_s *j_revoke;
-	struct jbd2_revoke_table_s *j_revoke_table[2];
-
-	/*
-	 * array of bhs for jbd2_journal_commit_transaction
-	 */
-	struct buffer_head	**j_wbuf;
-	int			j_wbufsize;
-
-	/*
-	 * this is the pid of hte last person to run a synchronous operation
-	 * through the journal
-	 */
-	pid_t			j_last_sync_writer;
-
-	/*
-	 * the average amount of time in nanoseconds it takes to commit a
-	 * transaction to disk. [j_state_lock]
-	 */
-	u64			j_average_commit_time;
-
-	/*
-	 * minimum and maximum times that we should wait for
-	 * additional filesystem operations to get batched into a
-	 * synchronous handle in microseconds
-	 */
-	u32			j_min_batch_time;
-	u32			j_max_batch_time;
-
-	/* This function is called when a transaction is closed */
-	void			(*j_commit_callback)(journal_t *,
-						     transaction_t *);
-
-	/*
-	 * Journal statistics
-	 */
-	spinlock_t		j_history_lock;
-	struct proc_dir_entry	*j_proc_entry;
-	struct transaction_stats_s j_stats;
-
-	/* Failed journal commit ID */
-	unsigned int		j_failed_commit;
-
-	/*
-	 * An opaque pointer to fs-private information.  ext3 puts its
-	 * superblock pointer here
-	 */
-	void *j_private;
-};
-
-/*
- * Journal flag definitions
- */
-#define JBD2_UNMOUNT	0x001	/* Journal thread is being destroyed */
-#define JBD2_ABORT	0x002	/* Journaling has been aborted for errors. */
-#define JBD2_ACK_ERR	0x004	/* The errno in the sb has been acked */
-#define JBD2_FLUSHED	0x008	/* The journal superblock has been flushed */
-#define JBD2_LOADED	0x010	/* The journal superblock has been loaded */
-#define JBD2_BARRIER	0x020	/* Use IDE barriers */
-#define JBD2_ABORT_ON_SYNCDATA_ERR	0x040	/* Abort the journal on file
-						 * data write error in ordered
-						 * mode */
-
-/*
- * Function declarations for the journaling transaction and buffer
- * management
- */
-
-/* Filing buffers */
-extern void jbd2_journal_unfile_buffer(journal_t *, struct journal_head *);
-extern void __jbd2_journal_refile_buffer(struct journal_head *);
-extern void jbd2_journal_refile_buffer(journal_t *, struct journal_head *);
-extern void __jbd2_journal_file_buffer(struct journal_head *, transaction_t *, int);
-extern void __journal_free_buffer(struct journal_head *bh);
-extern void jbd2_journal_file_buffer(struct journal_head *, transaction_t *, int);
-extern void __journal_clean_data_list(transaction_t *transaction);
-
-/* Log buffer allocation */
-extern struct journal_head * jbd2_journal_get_descriptor_buffer(journal_t *);
-int jbd2_journal_next_log_block(journal_t *, unsigned long long *);
-int jbd2_journal_get_log_tail(journal_t *journal, tid_t *tid,
-			      unsigned long *block);
-void __jbd2_update_log_tail(journal_t *journal, tid_t tid, unsigned long block);
-void jbd2_update_log_tail(journal_t *journal, tid_t tid, unsigned long block);
-
-/* Commit management */
-extern void jbd2_journal_commit_transaction(journal_t *);
-
-/* Checkpoint list management */
-int __jbd2_journal_clean_checkpoint_list(journal_t *journal);
-int __jbd2_journal_remove_checkpoint(struct journal_head *);
-void __jbd2_journal_insert_checkpoint(struct journal_head *, transaction_t *);
-
-
-/*
- * Triggers
- */
-
-struct jbd2_buffer_trigger_type {
-	/*
-	 * Fired a the moment data to write to the journal are known to be
-	 * stable - so either at the moment b_frozen_data is created or just
-	 * before a buffer is written to the journal.  mapped_data is a mapped
-	 * buffer that is the frozen data for commit.
-	 */
-	void (*t_frozen)(struct jbd2_buffer_trigger_type *type,
-			 struct buffer_head *bh, void *mapped_data,
-			 size_t size);
-
-	/*
-	 * Fired during journal abort for dirty buffers that will not be
-	 * committed.
-	 */
-	void (*t_abort)(struct jbd2_buffer_trigger_type *type,
-			struct buffer_head *bh);
-};
-
-extern void jbd2_buffer_frozen_trigger(struct journal_head *jh,
-				       void *mapped_data,
-				       struct jbd2_buffer_trigger_type *triggers);
-extern void jbd2_buffer_abort_trigger(struct journal_head *jh,
-				      struct jbd2_buffer_trigger_type *triggers);
-
-/* Buffer IO */
-extern int
-jbd2_journal_write_metadata_buffer(transaction_t	  *transaction,
-			      struct journal_head  *jh_in,
-			      struct journal_head **jh_out,
-			      unsigned long long   blocknr);
-
-/* Transaction locking */
-extern void		__wait_on_journal (journal_t *);
-
-/* Transaction cache support */
-extern void jbd2_journal_destroy_transaction_cache(void);
-extern int  jbd2_journal_init_transaction_cache(void);
-extern void jbd2_journal_free_transaction(transaction_t *);
-
-/*
- * Journal locking.
- *
- * We need to lock the journal during transaction state changes so that nobody
- * ever tries to take a handle on the running transaction while we are in the
- * middle of moving it to the commit phase.  j_state_lock does this.
- *
- * Note that the locking is completely interrupt unsafe.  We never touch
- * journal structures from interrupts.
- */
-
-static inline handle_t *journal_current_handle(void)
-{
-	return current->journal_info;
-}
-
-/* The journaling code user interface:
- *
- * Create and destroy handles
- * Register buffer modifications against the current transaction.
- */
-
-extern handle_t *jbd2_journal_start(journal_t *, int nblocks);
-extern handle_t *jbd2__journal_start(journal_t *, int nblocks, gfp_t gfp_mask);
-extern int	 jbd2_journal_restart(handle_t *, int nblocks);
-extern int	 jbd2__journal_restart(handle_t *, int nblocks, gfp_t gfp_mask);
-extern int	 jbd2_journal_extend (handle_t *, int nblocks);
-extern int	 jbd2_journal_get_write_access(handle_t *, struct buffer_head *);
-extern int	 jbd2_journal_get_create_access (handle_t *, struct buffer_head *);
-extern int	 jbd2_journal_get_undo_access(handle_t *, struct buffer_head *);
-void		 jbd2_journal_set_triggers(struct buffer_head *,
-					   struct jbd2_buffer_trigger_type *type);
-extern int	 jbd2_journal_dirty_metadata (handle_t *, struct buffer_head *);
-extern void	 jbd2_journal_release_buffer (handle_t *, struct buffer_head *);
-extern int	 jbd2_journal_forget (handle_t *, struct buffer_head *);
-extern void	 journal_sync_buffer (struct buffer_head *);
-extern void	 jbd2_journal_invalidatepage(journal_t *,
-				struct page *, unsigned long);
-extern int	 jbd2_journal_try_to_free_buffers(journal_t *, struct page *, gfp_t);
-extern int	 jbd2_journal_stop(handle_t *);
-extern int	 jbd2_journal_flush (journal_t *);
-extern void	 jbd2_journal_lock_updates (journal_t *);
-extern void	 jbd2_journal_unlock_updates (journal_t *);
-
-extern journal_t * jbd2_journal_init_dev(struct block_device *bdev,
-				struct block_device *fs_dev,
-				unsigned long long start, int len, int bsize);
-extern journal_t * jbd2_journal_init_inode (struct inode *);
-extern int	   jbd2_journal_update_format (journal_t *);
-extern int	   jbd2_journal_check_used_features
-		   (journal_t *, unsigned long, unsigned long, unsigned long);
-extern int	   jbd2_journal_check_available_features
-		   (journal_t *, unsigned long, unsigned long, unsigned long);
-extern int	   jbd2_journal_set_features
-		   (journal_t *, unsigned long, unsigned long, unsigned long);
-extern void	   jbd2_journal_clear_features
-		   (journal_t *, unsigned long, unsigned long, unsigned long);
-extern int	   jbd2_journal_load       (journal_t *journal);
-extern int	   jbd2_journal_destroy    (journal_t *);
-extern int	   jbd2_journal_recover    (journal_t *journal);
-extern int	   jbd2_journal_wipe       (journal_t *, int);
-extern int	   jbd2_journal_skip_recovery	(journal_t *);
-extern void	   jbd2_journal_update_sb_log_tail	(journal_t *, tid_t,
-				unsigned long, int);
-extern void	   __jbd2_journal_abort_hard	(journal_t *);
-extern void	   jbd2_journal_abort      (journal_t *, int);
-extern int	   jbd2_journal_errno      (journal_t *);
-extern void	   jbd2_journal_ack_err    (journal_t *);
-extern int	   jbd2_journal_clear_err  (journal_t *);
-extern int	   jbd2_journal_bmap(journal_t *, unsigned long, unsigned long long *);
-extern int	   jbd2_journal_force_commit(journal_t *);
-extern int	   jbd2_journal_file_inode(handle_t *handle, struct jbd2_inode *inode);
-extern int	   jbd2_journal_begin_ordered_truncate(journal_t *journal,
-				struct jbd2_inode *inode, loff_t new_size);
-extern void	   jbd2_journal_init_jbd_inode(struct jbd2_inode *jinode, struct inode *inode);
-extern void	   jbd2_journal_release_jbd_inode(journal_t *journal, struct jbd2_inode *jinode);
-
-/*
- * journal_head management
- */
-struct journal_head *jbd2_journal_add_journal_head(struct buffer_head *bh);
-struct journal_head *jbd2_journal_grab_journal_head(struct buffer_head *bh);
-void jbd2_journal_put_journal_head(struct journal_head *jh);
-
-/*
- * handle management
- */
-extern struct kmem_cache *jbd2_handle_cache;
-
-static inline handle_t *jbd2_alloc_handle(gfp_t gfp_flags)
-{
-	return kmem_cache_alloc(jbd2_handle_cache, gfp_flags);
-}
-
-static inline void jbd2_free_handle(handle_t *handle)
-{
-	kmem_cache_free(jbd2_handle_cache, handle);
-}
-
-/*
- * jbd2_inode management (optional, for those file systems that want to use
- * dynamically allocated jbd2_inode structures)
- */
-extern struct kmem_cache *jbd2_inode_cache;
-
-static inline struct jbd2_inode *jbd2_alloc_inode(gfp_t gfp_flags)
-{
-	return kmem_cache_alloc(jbd2_inode_cache, gfp_flags);
-}
-
-static inline void jbd2_free_inode(struct jbd2_inode *jinode)
-{
-	kmem_cache_free(jbd2_inode_cache, jinode);
-}
-
-/* Primary revoke support */
-#define JOURNAL_REVOKE_DEFAULT_HASH 256
-extern int	   jbd2_journal_init_revoke(journal_t *, int);
-extern void	   jbd2_journal_destroy_revoke_caches(void);
-extern int	   jbd2_journal_init_revoke_caches(void);
-
-extern void	   jbd2_journal_destroy_revoke(journal_t *);
-extern int	   jbd2_journal_revoke (handle_t *, unsigned long long, struct buffer_head *);
-extern int	   jbd2_journal_cancel_revoke(handle_t *, struct journal_head *);
-extern void	   jbd2_journal_write_revoke_records(journal_t *,
-						     transaction_t *, int);
-
-/* Recovery revoke support */
-extern int	jbd2_journal_set_revoke(journal_t *, unsigned long long, tid_t);
-extern int	jbd2_journal_test_revoke(journal_t *, unsigned long long, tid_t);
-extern void	jbd2_journal_clear_revoke(journal_t *);
-extern void	jbd2_journal_switch_revoke_table(journal_t *journal);
-extern void	jbd2_clear_buffer_revoked_flags(journal_t *journal);
-
-/*
- * The log thread user interface:
- *
- * Request space in the current transaction, and force transaction commit
- * transitions on demand.
- */
-
-int __jbd2_log_space_left(journal_t *); /* Called with journal locked */
-int jbd2_log_start_commit(journal_t *journal, tid_t tid);
-int __jbd2_log_start_commit(journal_t *journal, tid_t tid);
-int jbd2_journal_start_commit(journal_t *journal, tid_t *tid);
-int jbd2_journal_force_commit_nested(journal_t *journal);
-int jbd2_log_wait_commit(journal_t *journal, tid_t tid);
-int jbd2_log_do_checkpoint(journal_t *journal);
-int jbd2_trans_will_send_data_barrier(journal_t *journal, tid_t tid);
-
-void __jbd2_log_wait_for_space(journal_t *journal);
-extern void __jbd2_journal_drop_transaction(journal_t *, transaction_t *);
-extern int jbd2_cleanup_journal_tail(journal_t *);
-
-/* Debugging code only: */
-
-#define jbd_ENOSYS() \
-do {								           \
-	printk (KERN_ERR "JBD unimplemented function %s\n", __func__); \
-	current->state = TASK_UNINTERRUPTIBLE;			           \
-	schedule();						           \
-} while (1)
-
-/*
- * is_journal_abort
- *
- * Simple test wrapper function to test the JBD2_ABORT state flag.  This
- * bit, when set, indicates that we have had a fatal error somewhere,
- * either inside the journaling layer or indicated to us by the client
- * (eg. ext3), and that we and should not commit any further
- * transactions.
- */
-
-static inline int is_journal_aborted(journal_t *journal)
-{
-	return journal->j_flags & JBD2_ABORT;
-}
-
-static inline int is_handle_aborted(handle_t *handle)
-{
-	if (handle->h_aborted)
-		return 1;
-	return is_journal_aborted(handle->h_transaction->t_journal);
-}
-
-static inline void jbd2_journal_abort_handle(handle_t *handle)
-{
-	handle->h_aborted = 1;
-}
-
-#endif /* __KERNEL__   */
-
-/* Comparison functions for transaction IDs: perform comparisons using
- * modulo arithmetic so that they work over sequence number wraps. */
-
-static inline int tid_gt(tid_t x, tid_t y)
-{
-	int difference = (x - y);
-	return (difference > 0);
-}
-
-static inline int tid_geq(tid_t x, tid_t y)
-{
-	int difference = (x - y);
-	return (difference >= 0);
-}
-
-extern int jbd2_journal_blocks_per_page(struct inode *inode);
-extern size_t journal_tag_bytes(journal_t *journal);
-
-/*
- * Return the minimum number of blocks which must be free in the journal
- * before a new transaction may be started.  Must be called under j_state_lock.
- */
-static inline int jbd_space_needed(journal_t *journal)
-{
-	int nblocks = journal->j_max_transaction_buffers;
-	if (journal->j_committing_transaction)
-		nblocks += atomic_read(&journal->j_committing_transaction->
-				       t_outstanding_credits);
-	return nblocks;
-}
-
-/*
- * Definitions which augment the buffer_head layer
- */
-
-/* journaling buffer types */
-#define BJ_None		0	/* Not journaled */
-#define BJ_Metadata	1	/* Normal journaled metadata */
-#define BJ_Forget	2	/* Buffer superseded by this transaction */
-#define BJ_IO		3	/* Buffer is for temporary IO use */
-#define BJ_Shadow	4	/* Buffer contents being shadowed to the log */
-#define BJ_LogCtl	5	/* Buffer contains log descriptors */
-#define BJ_Reserved	6	/* Buffer is reserved for access by journal */
-#define BJ_Types	7
-
-extern int jbd_blocks_per_page(struct inode *inode);
-
-#ifdef __KERNEL__
-
-#define buffer_trace_init(bh)	do {} while (0)
-#define print_buffer_fields(bh)	do {} while (0)
-#define print_buffer_trace(bh)	do {} while (0)
-#define BUFFER_TRACE(bh, info)	do {} while (0)
-#define BUFFER_TRACE2(bh, bh2, info)	do {} while (0)
-#define JBUFFER_TRACE(jh, info)	do {} while (0)
-
-#endif	/* __KERNEL__ */
-
-#endif	/* _LINUX_JBD2_H */
diff --git a/ANDROID_3.4.5/include/linux/jbd_common.h b/ANDROID_3.4.5/include/linux/jbd_common.h
deleted file mode 100644
index 6230f855..00000000
--- a/ANDROID_3.4.5/include/linux/jbd_common.h
+++ /dev/null
@@ -1,68 +0,0 @@
-#ifndef _LINUX_JBD_STATE_H
-#define _LINUX_JBD_STATE_H
-
-enum jbd_state_bits {
-	BH_JBD			/* Has an attached ext3 journal_head */
-	  = BH_PrivateStart,
-	BH_JWrite,		/* Being written to log (@@@ DEBUGGING) */
-	BH_Freed,		/* Has been freed (truncated) */
-	BH_Revoked,		/* Has been revoked from the log */
-	BH_RevokeValid,		/* Revoked flag is valid */
-	BH_JBDDirty,		/* Is dirty but journaled */
-	BH_State,		/* Pins most journal_head state */
-	BH_JournalHead,		/* Pins bh->b_private and jh->b_bh */
-	BH_Unshadow,		/* Dummy bit, for BJ_Shadow wakeup filtering */
-	BH_JBDPrivateStart,	/* First bit available for private use by FS */
-};
-
-BUFFER_FNS(JBD, jbd)
-BUFFER_FNS(JWrite, jwrite)
-BUFFER_FNS(JBDDirty, jbddirty)
-TAS_BUFFER_FNS(JBDDirty, jbddirty)
-BUFFER_FNS(Revoked, revoked)
-TAS_BUFFER_FNS(Revoked, revoked)
-BUFFER_FNS(RevokeValid, revokevalid)
-TAS_BUFFER_FNS(RevokeValid, revokevalid)
-BUFFER_FNS(Freed, freed)
-
-static inline struct buffer_head *jh2bh(struct journal_head *jh)
-{
-	return jh->b_bh;
-}
-
-static inline struct journal_head *bh2jh(struct buffer_head *bh)
-{
-	return bh->b_private;
-}
-
-static inline void jbd_lock_bh_state(struct buffer_head *bh)
-{
-	bit_spin_lock(BH_State, &bh->b_state);
-}
-
-static inline int jbd_trylock_bh_state(struct buffer_head *bh)
-{
-	return bit_spin_trylock(BH_State, &bh->b_state);
-}
-
-static inline int jbd_is_locked_bh_state(struct buffer_head *bh)
-{
-	return bit_spin_is_locked(BH_State, &bh->b_state);
-}
-
-static inline void jbd_unlock_bh_state(struct buffer_head *bh)
-{
-	bit_spin_unlock(BH_State, &bh->b_state);
-}
-
-static inline void jbd_lock_bh_journal_head(struct buffer_head *bh)
-{
-	bit_spin_lock(BH_JournalHead, &bh->b_state);
-}
-
-static inline void jbd_unlock_bh_journal_head(struct buffer_head *bh)
-{
-	bit_spin_unlock(BH_JournalHead, &bh->b_state);
-}
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/jffs2.h b/ANDROID_3.4.5/include/linux/jffs2.h
deleted file mode 100644
index a18b719f..00000000
--- a/ANDROID_3.4.5/include/linux/jffs2.h
+++ /dev/null
@@ -1,223 +0,0 @@
-/*
- * JFFS2 -- Journalling Flash File System, Version 2.
- *
- * Copyright © 2001-2007 Red Hat, Inc.
- * Copyright © 2004-2010 David Woodhouse <dwmw2@infradead.org>
- *
- * Created by David Woodhouse <dwmw2@infradead.org>
- *
- * For licensing information, see the file 'LICENCE' in the
- * jffs2 directory.
- */
-
-#ifndef __LINUX_JFFS2_H__
-#define __LINUX_JFFS2_H__
-
-#include <linux/types.h>
-#include <linux/magic.h>
-
-/* You must include something which defines the C99 uintXX_t types. 
-   We don't do it from here because this file is used in too many
-   different environments. */
-
-/* Values we may expect to find in the 'magic' field */
-#define JFFS2_OLD_MAGIC_BITMASK 0x1984
-#define JFFS2_MAGIC_BITMASK 0x1985
-#define KSAMTIB_CIGAM_2SFFJ 0x8519 /* For detecting wrong-endian fs */
-#define JFFS2_EMPTY_BITMASK 0xffff
-#define JFFS2_DIRTY_BITMASK 0x0000
-
-/* Summary node MAGIC marker */
-#define JFFS2_SUM_MAGIC	0x02851885
-
-/* We only allow a single char for length, and 0xFF is empty flash so
-   we don't want it confused with a real length. Hence max 254.
-*/
-#define JFFS2_MAX_NAME_LEN 254
-
-/* How small can we sensibly write nodes? */
-#define JFFS2_MIN_DATA_LEN 128
-
-#define JFFS2_COMPR_NONE	0x00
-#define JFFS2_COMPR_ZERO	0x01
-#define JFFS2_COMPR_RTIME	0x02
-#define JFFS2_COMPR_RUBINMIPS	0x03
-#define JFFS2_COMPR_COPY	0x04
-#define JFFS2_COMPR_DYNRUBIN	0x05
-#define JFFS2_COMPR_ZLIB	0x06
-#define JFFS2_COMPR_LZO		0x07
-/* Compatibility flags. */
-#define JFFS2_COMPAT_MASK 0xc000      /* What do to if an unknown nodetype is found */
-#define JFFS2_NODE_ACCURATE 0x2000
-/* INCOMPAT: Fail to mount the filesystem */
-#define JFFS2_FEATURE_INCOMPAT 0xc000
-/* ROCOMPAT: Mount read-only */
-#define JFFS2_FEATURE_ROCOMPAT 0x8000
-/* RWCOMPAT_COPY: Mount read/write, and copy the node when it's GC'd */
-#define JFFS2_FEATURE_RWCOMPAT_COPY 0x4000
-/* RWCOMPAT_DELETE: Mount read/write, and delete the node when it's GC'd */
-#define JFFS2_FEATURE_RWCOMPAT_DELETE 0x0000
-
-#define JFFS2_NODETYPE_DIRENT (JFFS2_FEATURE_INCOMPAT | JFFS2_NODE_ACCURATE | 1)
-#define JFFS2_NODETYPE_INODE (JFFS2_FEATURE_INCOMPAT | JFFS2_NODE_ACCURATE | 2)
-#define JFFS2_NODETYPE_CLEANMARKER (JFFS2_FEATURE_RWCOMPAT_DELETE | JFFS2_NODE_ACCURATE | 3)
-#define JFFS2_NODETYPE_PADDING (JFFS2_FEATURE_RWCOMPAT_DELETE | JFFS2_NODE_ACCURATE | 4)
-
-#define JFFS2_NODETYPE_SUMMARY (JFFS2_FEATURE_RWCOMPAT_DELETE | JFFS2_NODE_ACCURATE | 6)
-
-#define JFFS2_NODETYPE_XATTR (JFFS2_FEATURE_INCOMPAT | JFFS2_NODE_ACCURATE | 8)
-#define JFFS2_NODETYPE_XREF (JFFS2_FEATURE_INCOMPAT | JFFS2_NODE_ACCURATE | 9)
-
-/* XATTR Related */
-#define JFFS2_XPREFIX_USER		1	/* for "user." */
-#define JFFS2_XPREFIX_SECURITY		2	/* for "security." */
-#define JFFS2_XPREFIX_ACL_ACCESS	3	/* for "system.posix_acl_access" */
-#define JFFS2_XPREFIX_ACL_DEFAULT	4	/* for "system.posix_acl_default" */
-#define JFFS2_XPREFIX_TRUSTED		5	/* for "trusted.*" */
-
-#define JFFS2_ACL_VERSION		0x0001
-
-// Maybe later...
-//#define JFFS2_NODETYPE_CHECKPOINT (JFFS2_FEATURE_RWCOMPAT_DELETE | JFFS2_NODE_ACCURATE | 3)
-//#define JFFS2_NODETYPE_OPTIONS (JFFS2_FEATURE_RWCOMPAT_COPY | JFFS2_NODE_ACCURATE | 4)
-
-
-#define JFFS2_INO_FLAG_PREREAD	  1	/* Do read_inode() for this one at
-					   mount time, don't wait for it to
-					   happen later */
-#define JFFS2_INO_FLAG_USERCOMPR  2	/* User has requested a specific
-					   compression type */
-
-
-/* These can go once we've made sure we've caught all uses without
-   byteswapping */
-
-typedef struct {
-	__u32 v32;
-} __attribute__((packed)) jint32_t;
-
-typedef struct {
-	__u32 m;
-} __attribute__((packed)) jmode_t;
-
-typedef struct {
-	__u16 v16;
-} __attribute__((packed)) jint16_t;
-
-struct jffs2_unknown_node
-{
-	/* All start like this */
-	jint16_t magic;
-	jint16_t nodetype;
-	jint32_t totlen; /* So we can skip over nodes we don't grok */
-	jint32_t hdr_crc;
-};
-
-struct jffs2_raw_dirent
-{
-	jint16_t magic;
-	jint16_t nodetype;	/* == JFFS2_NODETYPE_DIRENT */
-	jint32_t totlen;
-	jint32_t hdr_crc;
-	jint32_t pino;
-	jint32_t version;
-	jint32_t ino; /* == zero for unlink */
-	jint32_t mctime;
-	__u8 nsize;
-	__u8 type;
-	__u8 unused[2];
-	jint32_t node_crc;
-	jint32_t name_crc;
-	__u8 name[0];
-};
-
-/* The JFFS2 raw inode structure: Used for storage on physical media.  */
-/* The uid, gid, atime, mtime and ctime members could be longer, but
-   are left like this for space efficiency. If and when people decide
-   they really need them extended, it's simple enough to add support for
-   a new type of raw node.
-*/
-struct jffs2_raw_inode
-{
-	jint16_t magic;      /* A constant magic number.  */
-	jint16_t nodetype;   /* == JFFS2_NODETYPE_INODE */
-	jint32_t totlen;     /* Total length of this node (inc data, etc.) */
-	jint32_t hdr_crc;
-	jint32_t ino;        /* Inode number.  */
-	jint32_t version;    /* Version number.  */
-	jmode_t mode;       /* The file's type or mode.  */
-	jint16_t uid;        /* The file's owner.  */
-	jint16_t gid;        /* The file's group.  */
-	jint32_t isize;      /* Total resultant size of this inode (used for truncations)  */
-	jint32_t atime;      /* Last access time.  */
-	jint32_t mtime;      /* Last modification time.  */
-	jint32_t ctime;      /* Change time.  */
-	jint32_t offset;     /* Where to begin to write.  */
-	jint32_t csize;      /* (Compressed) data size */
-	jint32_t dsize;	     /* Size of the node's data. (after decompression) */
-	__u8 compr;       /* Compression algorithm used */
-	__u8 usercompr;   /* Compression algorithm requested by the user */
-	jint16_t flags;	     /* See JFFS2_INO_FLAG_* */
-	jint32_t data_crc;   /* CRC for the (compressed) data.  */
-	jint32_t node_crc;   /* CRC for the raw inode (excluding data)  */
-	__u8 data[0];
-};
-
-struct jffs2_raw_xattr {
-	jint16_t magic;
-	jint16_t nodetype;	/* = JFFS2_NODETYPE_XATTR */
-	jint32_t totlen;
-	jint32_t hdr_crc;
-	jint32_t xid;		/* XATTR identifier number */
-	jint32_t version;
-	__u8 xprefix;
-	__u8 name_len;
-	jint16_t value_len;
-	jint32_t data_crc;
-	jint32_t node_crc;
-	__u8 data[0];
-} __attribute__((packed));
-
-struct jffs2_raw_xref
-{
-	jint16_t magic;
-	jint16_t nodetype;	/* = JFFS2_NODETYPE_XREF */
-	jint32_t totlen;
-	jint32_t hdr_crc;
-	jint32_t ino;		/* inode number */
-	jint32_t xid;		/* XATTR identifier number */
-	jint32_t xseqno;	/* xref sequential number */
-	jint32_t node_crc;
-} __attribute__((packed));
-
-struct jffs2_raw_summary
-{
-	jint16_t magic;
-	jint16_t nodetype; 	/* = JFFS2_NODETYPE_SUMMARY */
-	jint32_t totlen;
-	jint32_t hdr_crc;
-	jint32_t sum_num;	/* number of sum entries*/
-	jint32_t cln_mkr;	/* clean marker size, 0 = no cleanmarker */
-	jint32_t padded;	/* sum of the size of padding nodes */
-	jint32_t sum_crc;	/* summary information crc */
-	jint32_t node_crc; 	/* node crc */
-	jint32_t sum[0]; 	/* inode summary info */
-};
-
-union jffs2_node_union
-{
-	struct jffs2_raw_inode i;
-	struct jffs2_raw_dirent d;
-	struct jffs2_raw_xattr x;
-	struct jffs2_raw_xref r;
-	struct jffs2_raw_summary s;
-	struct jffs2_unknown_node u;
-};
-
-/* Data payload for device nodes. */
-union jffs2_device_node {
-	jint16_t old_id;
-	jint32_t new_id;
-};
-
-#endif /* __LINUX_JFFS2_H__ */
diff --git a/ANDROID_3.4.5/include/linux/jhash.h b/ANDROID_3.4.5/include/linux/jhash.h
deleted file mode 100644
index 47cb09ed..00000000
--- a/ANDROID_3.4.5/include/linux/jhash.h
+++ /dev/null
@@ -1,170 +0,0 @@
-#ifndef _LINUX_JHASH_H
-#define _LINUX_JHASH_H
-
-/* jhash.h: Jenkins hash support.
- *
- * Copyright (C) 2006. Bob Jenkins (bob_jenkins@burtleburtle.net)
- *
- * http://burtleburtle.net/bob/hash/
- *
- * These are the credits from Bob's sources:
- *
- * lookup3.c, by Bob Jenkins, May 2006, Public Domain.
- *
- * These are functions for producing 32-bit hashes for hash table lookup.
- * hashword(), hashlittle(), hashlittle2(), hashbig(), mix(), and final()
- * are externally useful functions.  Routines to test the hash are included
- * if SELF_TEST is defined.  You can use this free for any purpose.  It's in
- * the public domain.  It has no warranty.
- *
- * Copyright (C) 2009-2010 Jozsef Kadlecsik (kadlec@blackhole.kfki.hu)
- *
- * I've modified Bob's hash to be useful in the Linux kernel, and
- * any bugs present are my fault.
- * Jozsef
- */
-#include <linux/bitops.h>
-#include <linux/unaligned/packed_struct.h>
-
-/* Best hash sizes are of power of two */
-#define jhash_size(n)   ((u32)1<<(n))
-/* Mask the hash value, i.e (value & jhash_mask(n)) instead of (value % n) */
-#define jhash_mask(n)   (jhash_size(n)-1)
-
-/* __jhash_mix -- mix 3 32-bit values reversibly. */
-#define __jhash_mix(a, b, c)			\
-{						\
-	a -= c;  a ^= rol32(c, 4);  c += b;	\
-	b -= a;  b ^= rol32(a, 6);  a += c;	\
-	c -= b;  c ^= rol32(b, 8);  b += a;	\
-	a -= c;  a ^= rol32(c, 16); c += b;	\
-	b -= a;  b ^= rol32(a, 19); a += c;	\
-	c -= b;  c ^= rol32(b, 4);  b += a;	\
-}
-
-/* __jhash_final - final mixing of 3 32-bit values (a,b,c) into c */
-#define __jhash_final(a, b, c)			\
-{						\
-	c ^= b; c -= rol32(b, 14);		\
-	a ^= c; a -= rol32(c, 11);		\
-	b ^= a; b -= rol32(a, 25);		\
-	c ^= b; c -= rol32(b, 16);		\
-	a ^= c; a -= rol32(c, 4);		\
-	b ^= a; b -= rol32(a, 14);		\
-	c ^= b; c -= rol32(b, 24);		\
-}
-
-/* An arbitrary initial parameter */
-#define JHASH_INITVAL		0xdeadbeef
-
-/* jhash - hash an arbitrary key
- * @k: sequence of bytes as key
- * @length: the length of the key
- * @initval: the previous hash, or an arbitray value
- *
- * The generic version, hashes an arbitrary sequence of bytes.
- * No alignment or length assumptions are made about the input key.
- *
- * Returns the hash value of the key. The result depends on endianness.
- */
-static inline u32 jhash(const void *key, u32 length, u32 initval)
-{
-	u32 a, b, c;
-	const u8 *k = key;
-
-	/* Set up the internal state */
-	a = b = c = JHASH_INITVAL + length + initval;
-
-	/* All but the last block: affect some 32 bits of (a,b,c) */
-	while (length > 12) {
-		a += __get_unaligned_cpu32(k);
-		b += __get_unaligned_cpu32(k + 4);
-		c += __get_unaligned_cpu32(k + 8);
-		__jhash_mix(a, b, c);
-		length -= 12;
-		k += 12;
-	}
-	/* Last block: affect all 32 bits of (c) */
-	/* All the case statements fall through */
-	switch (length) {
-	case 12: c += (u32)k[11]<<24;
-	case 11: c += (u32)k[10]<<16;
-	case 10: c += (u32)k[9]<<8;
-	case 9:  c += k[8];
-	case 8:  b += (u32)k[7]<<24;
-	case 7:  b += (u32)k[6]<<16;
-	case 6:  b += (u32)k[5]<<8;
-	case 5:  b += k[4];
-	case 4:  a += (u32)k[3]<<24;
-	case 3:  a += (u32)k[2]<<16;
-	case 2:  a += (u32)k[1]<<8;
-	case 1:  a += k[0];
-		 __jhash_final(a, b, c);
-	case 0: /* Nothing left to add */
-		break;
-	}
-
-	return c;
-}
-
-/* jhash2 - hash an array of u32's
- * @k: the key which must be an array of u32's
- * @length: the number of u32's in the key
- * @initval: the previous hash, or an arbitray value
- *
- * Returns the hash value of the key.
- */
-static inline u32 jhash2(const u32 *k, u32 length, u32 initval)
-{
-	u32 a, b, c;
-
-	/* Set up the internal state */
-	a = b = c = JHASH_INITVAL + (length<<2) + initval;
-
-	/* Handle most of the key */
-	while (length > 3) {
-		a += k[0];
-		b += k[1];
-		c += k[2];
-		__jhash_mix(a, b, c);
-		length -= 3;
-		k += 3;
-	}
-
-	/* Handle the last 3 u32's: all the case statements fall through */
-	switch (length) {
-	case 3: c += k[2];
-	case 2: b += k[1];
-	case 1: a += k[0];
-		__jhash_final(a, b, c);
-	case 0:	/* Nothing left to add */
-		break;
-	}
-
-	return c;
-}
-
-
-/* jhash_3words - hash exactly 3, 2 or 1 word(s) */
-static inline u32 jhash_3words(u32 a, u32 b, u32 c, u32 initval)
-{
-	a += JHASH_INITVAL;
-	b += JHASH_INITVAL;
-	c += initval;
-
-	__jhash_final(a, b, c);
-
-	return c;
-}
-
-static inline u32 jhash_2words(u32 a, u32 b, u32 initval)
-{
-	return jhash_3words(a, b, 0, initval);
-}
-
-static inline u32 jhash_1word(u32 a, u32 initval)
-{
-	return jhash_3words(a, 0, 0, initval);
-}
-
-#endif /* _LINUX_JHASH_H */
diff --git a/ANDROID_3.4.5/include/linux/jiffies.h b/ANDROID_3.4.5/include/linux/jiffies.h
deleted file mode 100644
index 265e2c3c..00000000
--- a/ANDROID_3.4.5/include/linux/jiffies.h
+++ /dev/null
@@ -1,315 +0,0 @@
-#ifndef _LINUX_JIFFIES_H
-#define _LINUX_JIFFIES_H
-
-#include <linux/math64.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/time.h>
-#include <linux/timex.h>
-#include <asm/param.h>			/* for HZ */
-
-/*
- * The following defines establish the engineering parameters of the PLL
- * model. The HZ variable establishes the timer interrupt frequency, 100 Hz
- * for the SunOS kernel, 256 Hz for the Ultrix kernel and 1024 Hz for the
- * OSF/1 kernel. The SHIFT_HZ define expresses the same value as the
- * nearest power of two in order to avoid hardware multiply operations.
- */
-#if HZ >= 12 && HZ < 24
-# define SHIFT_HZ	4
-#elif HZ >= 24 && HZ < 48
-# define SHIFT_HZ	5
-#elif HZ >= 48 && HZ < 96
-# define SHIFT_HZ	6
-#elif HZ >= 96 && HZ < 192
-# define SHIFT_HZ	7
-#elif HZ >= 192 && HZ < 384
-# define SHIFT_HZ	8
-#elif HZ >= 384 && HZ < 768
-# define SHIFT_HZ	9
-#elif HZ >= 768 && HZ < 1536
-# define SHIFT_HZ	10
-#elif HZ >= 1536 && HZ < 3072
-# define SHIFT_HZ	11
-#elif HZ >= 3072 && HZ < 6144
-# define SHIFT_HZ	12
-#elif HZ >= 6144 && HZ < 12288
-# define SHIFT_HZ	13
-#else
-# error Invalid value of HZ.
-#endif
-
-/* LATCH is used in the interval timer and ftape setup. */
-#define LATCH  ((CLOCK_TICK_RATE + HZ/2) / HZ)	/* For divider */
-
-/* Suppose we want to divide two numbers NOM and DEN: NOM/DEN, then we can
- * improve accuracy by shifting LSH bits, hence calculating:
- *     (NOM << LSH) / DEN
- * This however means trouble for large NOM, because (NOM << LSH) may no
- * longer fit in 32 bits. The following way of calculating this gives us
- * some slack, under the following conditions:
- *   - (NOM / DEN) fits in (32 - LSH) bits.
- *   - (NOM % DEN) fits in (32 - LSH) bits.
- */
-#define SH_DIV(NOM,DEN,LSH) (   (((NOM) / (DEN)) << (LSH))              \
-                             + ((((NOM) % (DEN)) << (LSH)) + (DEN) / 2) / (DEN))
-
-/* HZ is the requested value. ACTHZ is actual HZ ("<< 8" is for accuracy) */
-#define ACTHZ (SH_DIV (CLOCK_TICK_RATE, LATCH, 8))
-
-/* TICK_NSEC is the time between ticks in nsec assuming real ACTHZ */
-#define TICK_NSEC (SH_DIV (1000000UL * 1000, ACTHZ, 8))
-
-/* TICK_USEC is the time between ticks in usec assuming fake USER_HZ */
-#define TICK_USEC ((1000000UL + USER_HZ/2) / USER_HZ)
-
-/* TICK_USEC_TO_NSEC is the time between ticks in nsec assuming real ACTHZ and	*/
-/* a value TUSEC for TICK_USEC (can be set bij adjtimex)		*/
-#define TICK_USEC_TO_NSEC(TUSEC) (SH_DIV (TUSEC * USER_HZ * 1000, ACTHZ, 8))
-
-/* some arch's have a small-data section that can be accessed register-relative
- * but that can only take up to, say, 4-byte variables. jiffies being part of
- * an 8-byte variable may not be correctly accessed unless we force the issue
- */
-#define __jiffy_data  __attribute__((section(".data")))
-
-/*
- * The 64-bit value is not atomic - you MUST NOT read it
- * without sampling the sequence number in xtime_lock.
- * get_jiffies_64() will do this for you as appropriate.
- */
-extern u64 __jiffy_data jiffies_64;
-extern unsigned long volatile __jiffy_data jiffies;
-
-#if (BITS_PER_LONG < 64)
-u64 get_jiffies_64(void);
-#else
-static inline u64 get_jiffies_64(void)
-{
-	return (u64)jiffies;
-}
-#endif
-
-/*
- *	These inlines deal with timer wrapping correctly. You are 
- *	strongly encouraged to use them
- *	1. Because people otherwise forget
- *	2. Because if the timer wrap changes in future you won't have to
- *	   alter your driver code.
- *
- * time_after(a,b) returns true if the time a is after time b.
- *
- * Do this with "<0" and ">=0" to only test the sign of the result. A
- * good compiler would generate better code (and a really good compiler
- * wouldn't care). Gcc is currently neither.
- */
-#define time_after(a,b)		\
-	(typecheck(unsigned long, a) && \
-	 typecheck(unsigned long, b) && \
-	 ((long)(b) - (long)(a) < 0))
-#define time_before(a,b)	time_after(b,a)
-
-#define time_after_eq(a,b)	\
-	(typecheck(unsigned long, a) && \
-	 typecheck(unsigned long, b) && \
-	 ((long)(a) - (long)(b) >= 0))
-#define time_before_eq(a,b)	time_after_eq(b,a)
-
-/*
- * Calculate whether a is in the range of [b, c].
- */
-#define time_in_range(a,b,c) \
-	(time_after_eq(a,b) && \
-	 time_before_eq(a,c))
-
-/*
- * Calculate whether a is in the range of [b, c).
- */
-#define time_in_range_open(a,b,c) \
-	(time_after_eq(a,b) && \
-	 time_before(a,c))
-
-/* Same as above, but does so with platform independent 64bit types.
- * These must be used when utilizing jiffies_64 (i.e. return value of
- * get_jiffies_64() */
-#define time_after64(a,b)	\
-	(typecheck(__u64, a) &&	\
-	 typecheck(__u64, b) && \
-	 ((__s64)(b) - (__s64)(a) < 0))
-#define time_before64(a,b)	time_after64(b,a)
-
-#define time_after_eq64(a,b)	\
-	(typecheck(__u64, a) && \
-	 typecheck(__u64, b) && \
-	 ((__s64)(a) - (__s64)(b) >= 0))
-#define time_before_eq64(a,b)	time_after_eq64(b,a)
-
-/*
- * These four macros compare jiffies and 'a' for convenience.
- */
-
-/* time_is_before_jiffies(a) return true if a is before jiffies */
-#define time_is_before_jiffies(a) time_after(jiffies, a)
-
-/* time_is_after_jiffies(a) return true if a is after jiffies */
-#define time_is_after_jiffies(a) time_before(jiffies, a)
-
-/* time_is_before_eq_jiffies(a) return true if a is before or equal to jiffies*/
-#define time_is_before_eq_jiffies(a) time_after_eq(jiffies, a)
-
-/* time_is_after_eq_jiffies(a) return true if a is after or equal to jiffies*/
-#define time_is_after_eq_jiffies(a) time_before_eq(jiffies, a)
-
-/*
- * Have the 32 bit jiffies value wrap 5 minutes after boot
- * so jiffies wrap bugs show up earlier.
- */
-#define INITIAL_JIFFIES ((unsigned long)(unsigned int) (-300*HZ))
-
-/*
- * Change timeval to jiffies, trying to avoid the
- * most obvious overflows..
- *
- * And some not so obvious.
- *
- * Note that we don't want to return LONG_MAX, because
- * for various timeout reasons we often end up having
- * to wait "jiffies+1" in order to guarantee that we wait
- * at _least_ "jiffies" - so "jiffies+1" had better still
- * be positive.
- */
-#define MAX_JIFFY_OFFSET ((LONG_MAX >> 1)-1)
-
-extern unsigned long preset_lpj;
-
-/*
- * We want to do realistic conversions of time so we need to use the same
- * values the update wall clock code uses as the jiffies size.  This value
- * is: TICK_NSEC (which is defined in timex.h).  This
- * is a constant and is in nanoseconds.  We will use scaled math
- * with a set of scales defined here as SEC_JIFFIE_SC,  USEC_JIFFIE_SC and
- * NSEC_JIFFIE_SC.  Note that these defines contain nothing but
- * constants and so are computed at compile time.  SHIFT_HZ (computed in
- * timex.h) adjusts the scaling for different HZ values.
-
- * Scaled math???  What is that?
- *
- * Scaled math is a way to do integer math on values that would,
- * otherwise, either overflow, underflow, or cause undesired div
- * instructions to appear in the execution path.  In short, we "scale"
- * up the operands so they take more bits (more precision, less
- * underflow), do the desired operation and then "scale" the result back
- * by the same amount.  If we do the scaling by shifting we avoid the
- * costly mpy and the dastardly div instructions.
-
- * Suppose, for example, we want to convert from seconds to jiffies
- * where jiffies is defined in nanoseconds as NSEC_PER_JIFFIE.  The
- * simple math is: jiff = (sec * NSEC_PER_SEC) / NSEC_PER_JIFFIE; We
- * observe that (NSEC_PER_SEC / NSEC_PER_JIFFIE) is a constant which we
- * might calculate at compile time, however, the result will only have
- * about 3-4 bits of precision (less for smaller values of HZ).
- *
- * So, we scale as follows:
- * jiff = (sec) * (NSEC_PER_SEC / NSEC_PER_JIFFIE);
- * jiff = ((sec) * ((NSEC_PER_SEC * SCALE)/ NSEC_PER_JIFFIE)) / SCALE;
- * Then we make SCALE a power of two so:
- * jiff = ((sec) * ((NSEC_PER_SEC << SCALE)/ NSEC_PER_JIFFIE)) >> SCALE;
- * Now we define:
- * #define SEC_CONV = ((NSEC_PER_SEC << SCALE)/ NSEC_PER_JIFFIE))
- * jiff = (sec * SEC_CONV) >> SCALE;
- *
- * Often the math we use will expand beyond 32-bits so we tell C how to
- * do this and pass the 64-bit result of the mpy through the ">> SCALE"
- * which should take the result back to 32-bits.  We want this expansion
- * to capture as much precision as possible.  At the same time we don't
- * want to overflow so we pick the SCALE to avoid this.  In this file,
- * that means using a different scale for each range of HZ values (as
- * defined in timex.h).
- *
- * For those who want to know, gcc will give a 64-bit result from a "*"
- * operator if the result is a long long AND at least one of the
- * operands is cast to long long (usually just prior to the "*" so as
- * not to confuse it into thinking it really has a 64-bit operand,
- * which, buy the way, it can do, but it takes more code and at least 2
- * mpys).
-
- * We also need to be aware that one second in nanoseconds is only a
- * couple of bits away from overflowing a 32-bit word, so we MUST use
- * 64-bits to get the full range time in nanoseconds.
-
- */
-
-/*
- * Here are the scales we will use.  One for seconds, nanoseconds and
- * microseconds.
- *
- * Within the limits of cpp we do a rough cut at the SEC_JIFFIE_SC and
- * check if the sign bit is set.  If not, we bump the shift count by 1.
- * (Gets an extra bit of precision where we can use it.)
- * We know it is set for HZ = 1024 and HZ = 100 not for 1000.
- * Haven't tested others.
-
- * Limits of cpp (for #if expressions) only long (no long long), but
- * then we only need the most signicant bit.
- */
-
-#define SEC_JIFFIE_SC (31 - SHIFT_HZ)
-#if !((((NSEC_PER_SEC << 2) / TICK_NSEC) << (SEC_JIFFIE_SC - 2)) & 0x80000000)
-#undef SEC_JIFFIE_SC
-#define SEC_JIFFIE_SC (32 - SHIFT_HZ)
-#endif
-#define NSEC_JIFFIE_SC (SEC_JIFFIE_SC + 29)
-#define USEC_JIFFIE_SC (SEC_JIFFIE_SC + 19)
-#define SEC_CONVERSION ((unsigned long)((((u64)NSEC_PER_SEC << SEC_JIFFIE_SC) +\
-                                TICK_NSEC -1) / (u64)TICK_NSEC))
-
-#define NSEC_CONVERSION ((unsigned long)((((u64)1 << NSEC_JIFFIE_SC) +\
-                                        TICK_NSEC -1) / (u64)TICK_NSEC))
-#define USEC_CONVERSION  \
-                    ((unsigned long)((((u64)NSEC_PER_USEC << USEC_JIFFIE_SC) +\
-                                        TICK_NSEC -1) / (u64)TICK_NSEC))
-/*
- * USEC_ROUND is used in the timeval to jiffie conversion.  See there
- * for more details.  It is the scaled resolution rounding value.  Note
- * that it is a 64-bit value.  Since, when it is applied, we are already
- * in jiffies (albit scaled), it is nothing but the bits we will shift
- * off.
- */
-#define USEC_ROUND (u64)(((u64)1 << USEC_JIFFIE_SC) - 1)
-/*
- * The maximum jiffie value is (MAX_INT >> 1).  Here we translate that
- * into seconds.  The 64-bit case will overflow if we are not careful,
- * so use the messy SH_DIV macro to do it.  Still all constants.
- */
-#if BITS_PER_LONG < 64
-# define MAX_SEC_IN_JIFFIES \
-	(long)((u64)((u64)MAX_JIFFY_OFFSET * TICK_NSEC) / NSEC_PER_SEC)
-#else	/* take care of overflow on 64 bits machines */
-# define MAX_SEC_IN_JIFFIES \
-	(SH_DIV((MAX_JIFFY_OFFSET >> SEC_JIFFIE_SC) * TICK_NSEC, NSEC_PER_SEC, 1) - 1)
-
-#endif
-
-/*
- * Convert various time units to each other:
- */
-extern unsigned int jiffies_to_msecs(const unsigned long j);
-extern unsigned int jiffies_to_usecs(const unsigned long j);
-extern unsigned long msecs_to_jiffies(const unsigned int m);
-extern unsigned long usecs_to_jiffies(const unsigned int u);
-extern unsigned long timespec_to_jiffies(const struct timespec *value);
-extern void jiffies_to_timespec(const unsigned long jiffies,
-				struct timespec *value);
-extern unsigned long timeval_to_jiffies(const struct timeval *value);
-extern void jiffies_to_timeval(const unsigned long jiffies,
-			       struct timeval *value);
-extern clock_t jiffies_to_clock_t(unsigned long x);
-extern unsigned long clock_t_to_jiffies(unsigned long x);
-extern u64 jiffies_64_to_clock_t(u64 x);
-extern u64 nsec_to_clock_t(u64 x);
-extern u64 nsecs_to_jiffies64(u64 n);
-extern unsigned long nsecs_to_jiffies(u64 n);
-
-#define TIMESTAMP_SIZE	30
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/journal-head.h b/ANDROID_3.4.5/include/linux/journal-head.h
deleted file mode 100644
index c18b46f8..00000000
--- a/ANDROID_3.4.5/include/linux/journal-head.h
+++ /dev/null
@@ -1,109 +0,0 @@
-/*
- * include/linux/journal-head.h
- *
- * buffer_head fields for JBD
- *
- * 27 May 2001 Andrew Morton
- *	Created - pulled out of fs.h
- */
-
-#ifndef JOURNAL_HEAD_H_INCLUDED
-#define JOURNAL_HEAD_H_INCLUDED
-
-typedef unsigned int		tid_t;		/* Unique transaction ID */
-typedef struct transaction_s	transaction_t;	/* Compound transaction type */
-
-
-struct buffer_head;
-
-struct journal_head {
-	/*
-	 * Points back to our buffer_head. [jbd_lock_bh_journal_head()]
-	 */
-	struct buffer_head *b_bh;
-
-	/*
-	 * Reference count - see description in journal.c
-	 * [jbd_lock_bh_journal_head()]
-	 */
-	int b_jcount;
-
-	/*
-	 * Journalling list for this buffer [jbd_lock_bh_state()]
-	 */
-	unsigned b_jlist;
-
-	/*
-	 * This flag signals the buffer has been modified by
-	 * the currently running transaction
-	 * [jbd_lock_bh_state()]
-	 */
-	unsigned b_modified;
-
-	/*
-	 * This feild tracks the last transaction id in which this buffer
-	 * has been cowed
-	 * [jbd_lock_bh_state()]
-	 */
-	tid_t b_cow_tid;
-
-	/*
-	 * Copy of the buffer data frozen for writing to the log.
-	 * [jbd_lock_bh_state()]
-	 */
-	char *b_frozen_data;
-
-	/*
-	 * Pointer to a saved copy of the buffer containing no uncommitted
-	 * deallocation references, so that allocations can avoid overwriting
-	 * uncommitted deletes. [jbd_lock_bh_state()]
-	 */
-	char *b_committed_data;
-
-	/*
-	 * Pointer to the compound transaction which owns this buffer's
-	 * metadata: either the running transaction or the committing
-	 * transaction (if there is one).  Only applies to buffers on a
-	 * transaction's data or metadata journaling list.
-	 * [j_list_lock] [jbd_lock_bh_state()]
-	 * Either of these locks is enough for reading, both are needed for
-	 * changes.
-	 */
-	transaction_t *b_transaction;
-
-	/*
-	 * Pointer to the running compound transaction which is currently
-	 * modifying the buffer's metadata, if there was already a transaction
-	 * committing it when the new transaction touched it.
-	 * [t_list_lock] [jbd_lock_bh_state()]
-	 */
-	transaction_t *b_next_transaction;
-
-	/*
-	 * Doubly-linked list of buffers on a transaction's data, metadata or
-	 * forget queue. [t_list_lock] [jbd_lock_bh_state()]
-	 */
-	struct journal_head *b_tnext, *b_tprev;
-
-	/*
-	 * Pointer to the compound transaction against which this buffer
-	 * is checkpointed.  Only dirty buffers can be checkpointed.
-	 * [j_list_lock]
-	 */
-	transaction_t *b_cp_transaction;
-
-	/*
-	 * Doubly-linked list of buffers still remaining to be flushed
-	 * before an old transaction can be checkpointed.
-	 * [j_list_lock]
-	 */
-	struct journal_head *b_cpnext, *b_cpprev;
-
-	/* Trigger type */
-	struct jbd2_buffer_trigger_type *b_triggers;
-
-	/* Trigger type for the committing transaction's frozen data */
-	struct jbd2_buffer_trigger_type *b_frozen_triggers;
-};
-
-#endif		/* JOURNAL_HEAD_H_INCLUDED */
diff --git a/ANDROID_3.4.5/include/linux/joystick.h b/ANDROID_3.4.5/include/linux/joystick.h
deleted file mode 100644
index 47199b13..00000000
--- a/ANDROID_3.4.5/include/linux/joystick.h
+++ /dev/null
@@ -1,145 +0,0 @@
-#ifndef _LINUX_JOYSTICK_H
-#define _LINUX_JOYSTICK_H
-
-/*
- *  Copyright (C) 1996-2000 Vojtech Pavlik
- *
- *  Sponsored by SuSE
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or 
- * (at your option) any later version.
- * 
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- * 
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- * 
- * Should you need to contact me, the author, you can do so either by
- * e-mail - mail your message to <vojtech@suse.cz>, or by paper mail:
- * Vojtech Pavlik, Ucitelska 1576, Prague 8, 182 00 Czech Republic
- */
-
-#include <linux/types.h>
-#include <linux/input.h>
-
-/*
- * Version
- */
-
-#define JS_VERSION		0x020100
-
-/*
- * Types and constants for reading from /dev/js
- */
-
-#define JS_EVENT_BUTTON		0x01	/* button pressed/released */
-#define JS_EVENT_AXIS		0x02	/* joystick moved */
-#define JS_EVENT_INIT		0x80	/* initial state of device */
-
-struct js_event {
-	__u32 time;	/* event timestamp in milliseconds */
-	__s16 value;	/* value */
-	__u8 type;	/* event type */
-	__u8 number;	/* axis/button number */
-};
-
-/*
- * IOCTL commands for joystick driver
- */
-
-#define JSIOCGVERSION		_IOR('j', 0x01, __u32)				/* get driver version */
-
-#define JSIOCGAXES		_IOR('j', 0x11, __u8)				/* get number of axes */
-#define JSIOCGBUTTONS		_IOR('j', 0x12, __u8)				/* get number of buttons */
-#define JSIOCGNAME(len)		_IOC(_IOC_READ, 'j', 0x13, len)			/* get identifier string */
-
-#define JSIOCSCORR		_IOW('j', 0x21, struct js_corr)			/* set correction values */
-#define JSIOCGCORR		_IOR('j', 0x22, struct js_corr)			/* get correction values */
-
-#define JSIOCSAXMAP		_IOW('j', 0x31, __u8[ABS_CNT])			/* set axis mapping */
-#define JSIOCGAXMAP		_IOR('j', 0x32, __u8[ABS_CNT])			/* get axis mapping */
-#define JSIOCSBTNMAP		_IOW('j', 0x33, __u16[KEY_MAX - BTN_MISC + 1])	/* set button mapping */
-#define JSIOCGBTNMAP		_IOR('j', 0x34, __u16[KEY_MAX - BTN_MISC + 1])	/* get button mapping */
-
-/*
- * Types and constants for get/set correction
- */
-
-#define JS_CORR_NONE		0x00	/* returns raw values */
-#define JS_CORR_BROKEN		0x01	/* broken line */
-
-struct js_corr {
-	__s32 coef[8];
-	__s16 prec;
-	__u16 type;
-};
-
-/*
- * v0.x compatibility definitions
- */
-
-#define JS_RETURN		sizeof(struct JS_DATA_TYPE)
-#define JS_TRUE			1
-#define JS_FALSE		0
-#define JS_X_0			0x01
-#define JS_Y_0			0x02
-#define JS_X_1			0x04
-#define JS_Y_1			0x08
-#define JS_MAX			2
-
-#define JS_DEF_TIMEOUT		0x1300
-#define JS_DEF_CORR		0
-#define JS_DEF_TIMELIMIT	10L
-
-#define JS_SET_CAL		1
-#define JS_GET_CAL		2
-#define JS_SET_TIMEOUT		3
-#define JS_GET_TIMEOUT		4
-#define JS_SET_TIMELIMIT	5
-#define JS_GET_TIMELIMIT	6
-#define JS_GET_ALL		7
-#define JS_SET_ALL		8
-
-struct JS_DATA_TYPE {
-	__s32 buttons;
-	__s32 x;
-	__s32 y;
-};
-
-struct JS_DATA_SAVE_TYPE_32 {
-	__s32 JS_TIMEOUT;
-	__s32 BUSY;
-	__s32 JS_EXPIRETIME;
-	__s32 JS_TIMELIMIT;
-	struct JS_DATA_TYPE JS_SAVE;
-	struct JS_DATA_TYPE JS_CORR;
-};
-
-struct JS_DATA_SAVE_TYPE_64 {
-	__s32 JS_TIMEOUT;
-	__s32 BUSY;
-	__s64 JS_EXPIRETIME;
-	__s64 JS_TIMELIMIT;
-	struct JS_DATA_TYPE JS_SAVE;
-	struct JS_DATA_TYPE JS_CORR;
-};
-
-#ifdef __KERNEL__
-#if BITS_PER_LONG == 64
-#define JS_DATA_SAVE_TYPE JS_DATA_SAVE_TYPE_64
-#elif BITS_PER_LONG == 32
-#define JS_DATA_SAVE_TYPE JS_DATA_SAVE_TYPE_32
-#else
-#error Unexpected BITS_PER_LONG
-#endif
-#endif
-
-#endif /* _LINUX_JOYSTICK_H */
diff --git a/ANDROID_3.4.5/include/linux/jump_label.h b/ANDROID_3.4.5/include/linux/jump_label.h
deleted file mode 100644
index c513a405..00000000
--- a/ANDROID_3.4.5/include/linux/jump_label.h
+++ /dev/null
@@ -1,226 +0,0 @@
-#ifndef _LINUX_JUMP_LABEL_H
-#define _LINUX_JUMP_LABEL_H
-
-/*
- * Jump label support
- *
- * Copyright (C) 2009-2012 Jason Baron <jbaron@redhat.com>
- * Copyright (C) 2011-2012 Peter Zijlstra <pzijlstr@redhat.com>
- *
- * Jump labels provide an interface to generate dynamic branches using
- * self-modifying code. Assuming toolchain and architecture support the result
- * of a "if (static_key_false(&key))" statement is a unconditional branch (which
- * defaults to false - and the true block is placed out of line).
- *
- * However at runtime we can change the branch target using
- * static_key_slow_{inc,dec}(). These function as a 'reference' count on the key
- * object and for as long as there are references all branches referring to
- * that particular key will point to the (out of line) true block.
- *
- * Since this relies on modifying code the static_key_slow_{inc,dec}() functions
- * must be considered absolute slow paths (machine wide synchronization etc.).
- * OTOH, since the affected branches are unconditional their runtime overhead
- * will be absolutely minimal, esp. in the default (off) case where the total
- * effect is a single NOP of appropriate size. The on case will patch in a jump
- * to the out-of-line block.
- *
- * When the control is directly exposed to userspace it is prudent to delay the
- * decrement to avoid high frequency code modifications which can (and do)
- * cause significant performance degradation. Struct static_key_deferred and
- * static_key_slow_dec_deferred() provide for this.
- *
- * Lacking toolchain and or architecture support, it falls back to a simple
- * conditional branch.
- *
- * struct static_key my_key = STATIC_KEY_INIT_TRUE;
- *
- *   if (static_key_true(&my_key)) {
- *   }
- *
- * will result in the true case being in-line and starts the key with a single
- * reference. Mixing static_key_true() and static_key_false() on the same key is not
- * allowed.
- *
- * Not initializing the key (static data is initialized to 0s anyway) is the
- * same as using STATIC_KEY_INIT_FALSE and static_key_false() is
- * equivalent with static_branch().
- *
-*/
-
-#include <linux/types.h>
-#include <linux/compiler.h>
-#include <linux/workqueue.h>
-
-#if defined(CC_HAVE_ASM_GOTO) && defined(CONFIG_JUMP_LABEL)
-
-struct static_key {
-	atomic_t enabled;
-/* Set lsb bit to 1 if branch is default true, 0 ot */
-	struct jump_entry *entries;
-#ifdef CONFIG_MODULES
-	struct static_key_mod *next;
-#endif
-};
-
-struct static_key_deferred {
-	struct static_key key;
-	unsigned long timeout;
-	struct delayed_work work;
-};
-
-# include <asm/jump_label.h>
-# define HAVE_JUMP_LABEL
-#endif	/* CC_HAVE_ASM_GOTO && CONFIG_JUMP_LABEL */
-
-enum jump_label_type {
-	JUMP_LABEL_DISABLE = 0,
-	JUMP_LABEL_ENABLE,
-};
-
-struct module;
-
-#ifdef HAVE_JUMP_LABEL
-
-#define JUMP_LABEL_TRUE_BRANCH 1UL
-
-static
-inline struct jump_entry *jump_label_get_entries(struct static_key *key)
-{
-	return (struct jump_entry *)((unsigned long)key->entries
-						& ~JUMP_LABEL_TRUE_BRANCH);
-}
-
-static inline bool jump_label_get_branch_default(struct static_key *key)
-{
-	if ((unsigned long)key->entries & JUMP_LABEL_TRUE_BRANCH)
-		return true;
-	return false;
-}
-
-static __always_inline bool static_key_false(struct static_key *key)
-{
-	return arch_static_branch(key);
-}
-
-static __always_inline bool static_key_true(struct static_key *key)
-{
-	return !static_key_false(key);
-}
-
-/* Deprecated. Please use 'static_key_false() instead. */
-static __always_inline bool static_branch(struct static_key *key)
-{
-	return arch_static_branch(key);
-}
-
-extern struct jump_entry __start___jump_table[];
-extern struct jump_entry __stop___jump_table[];
-
-extern void jump_label_init(void);
-extern void jump_label_lock(void);
-extern void jump_label_unlock(void);
-extern void arch_jump_label_transform(struct jump_entry *entry,
-				      enum jump_label_type type);
-extern void arch_jump_label_transform_static(struct jump_entry *entry,
-					     enum jump_label_type type);
-extern int jump_label_text_reserved(void *start, void *end);
-extern void static_key_slow_inc(struct static_key *key);
-extern void static_key_slow_dec(struct static_key *key);
-extern void static_key_slow_dec_deferred(struct static_key_deferred *key);
-extern void jump_label_apply_nops(struct module *mod);
-extern void
-jump_label_rate_limit(struct static_key_deferred *key, unsigned long rl);
-
-#define STATIC_KEY_INIT_TRUE ((struct static_key) \
-	{ .enabled = ATOMIC_INIT(1), .entries = (void *)1 })
-#define STATIC_KEY_INIT_FALSE ((struct static_key) \
-	{ .enabled = ATOMIC_INIT(0), .entries = (void *)0 })
-
-#else  /* !HAVE_JUMP_LABEL */
-
-#include <linux/atomic.h>
-
-struct static_key {
-	atomic_t enabled;
-};
-
-static __always_inline void jump_label_init(void)
-{
-}
-
-struct static_key_deferred {
-	struct static_key  key;
-};
-
-static __always_inline bool static_key_false(struct static_key *key)
-{
-	if (unlikely(atomic_read(&key->enabled)) > 0)
-		return true;
-	return false;
-}
-
-static __always_inline bool static_key_true(struct static_key *key)
-{
-	if (likely(atomic_read(&key->enabled)) > 0)
-		return true;
-	return false;
-}
-
-/* Deprecated. Please use 'static_key_false() instead. */
-static __always_inline bool static_branch(struct static_key *key)
-{
-	if (unlikely(atomic_read(&key->enabled)) > 0)
-		return true;
-	return false;
-}
-
-static inline void static_key_slow_inc(struct static_key *key)
-{
-	atomic_inc(&key->enabled);
-}
-
-static inline void static_key_slow_dec(struct static_key *key)
-{
-	atomic_dec(&key->enabled);
-}
-
-static inline void static_key_slow_dec_deferred(struct static_key_deferred *key)
-{
-	static_key_slow_dec(&key->key);
-}
-
-static inline int jump_label_text_reserved(void *start, void *end)
-{
-	return 0;
-}
-
-static inline void jump_label_lock(void) {}
-static inline void jump_label_unlock(void) {}
-
-static inline int jump_label_apply_nops(struct module *mod)
-{
-	return 0;
-}
-
-static inline void
-jump_label_rate_limit(struct static_key_deferred *key,
-		unsigned long rl)
-{
-}
-
-#define STATIC_KEY_INIT_TRUE ((struct static_key) \
-		{ .enabled = ATOMIC_INIT(1) })
-#define STATIC_KEY_INIT_FALSE ((struct static_key) \
-		{ .enabled = ATOMIC_INIT(0) })
-
-#endif	/* HAVE_JUMP_LABEL */
-
-#define STATIC_KEY_INIT STATIC_KEY_INIT_FALSE
-#define jump_label_enabled static_key_enabled
-
-static inline bool static_key_enabled(struct static_key *key)
-{
-	return (atomic_read(&key->enabled) > 0);
-}
-
-#endif	/* _LINUX_JUMP_LABEL_H */
diff --git a/ANDROID_3.4.5/include/linux/jz4740-adc.h b/ANDROID_3.4.5/include/linux/jz4740-adc.h
deleted file mode 100644
index 8184578f..00000000
--- a/ANDROID_3.4.5/include/linux/jz4740-adc.h
+++ /dev/null
@@ -1,32 +0,0 @@
-
-#ifndef __LINUX_JZ4740_ADC
-#define __LINUX_JZ4740_ADC
-
-struct device;
-
-/*
- * jz4740_adc_set_config - Configure a JZ4740 adc device
- * @dev: Pointer to a jz4740-adc device
- * @mask: Mask for the config value to be set
- * @val: Value to be set
- *
- * This function can be used by the JZ4740 ADC mfd cells to configure their
- * options in the shared config register.
-*/
-int jz4740_adc_set_config(struct device *dev, uint32_t mask, uint32_t val);
-
-#define JZ_ADC_CONFIG_SPZZ		BIT(31)
-#define JZ_ADC_CONFIG_EX_IN		BIT(30)
-#define JZ_ADC_CONFIG_DNUM_MASK		(0x7 << 16)
-#define JZ_ADC_CONFIG_DMA_ENABLE	BIT(15)
-#define JZ_ADC_CONFIG_XYZ_MASK		(0x2 << 13)
-#define JZ_ADC_CONFIG_SAMPLE_NUM_MASK	(0x7 << 10)
-#define JZ_ADC_CONFIG_CLKDIV_MASK	(0xf << 5)
-#define JZ_ADC_CONFIG_BAT_MB		BIT(4)
-
-#define JZ_ADC_CONFIG_DNUM(dnum)	((dnum) << 16)
-#define JZ_ADC_CONFIG_XYZ_OFFSET(dnum)	((xyz) << 13)
-#define JZ_ADC_CONFIG_SAMPLE_NUM(x)	((x) << 10)
-#define JZ_ADC_CONFIG_CLKDIV(div)	((div) << 5)
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/kallsyms.h b/ANDROID_3.4.5/include/linux/kallsyms.h
deleted file mode 100644
index 38757195..00000000
--- a/ANDROID_3.4.5/include/linux/kallsyms.h
+++ /dev/null
@@ -1,121 +0,0 @@
-/* Rewritten and vastly simplified by Rusty Russell for in-kernel
- * module loader:
- *   Copyright 2002 Rusty Russell <rusty@rustcorp.com.au> IBM Corporation
- */
-#ifndef _LINUX_KALLSYMS_H
-#define _LINUX_KALLSYMS_H
-
-#include <linux/errno.h>
-#include <linux/kernel.h>
-#include <linux/stddef.h>
-
-#define KSYM_NAME_LEN 128
-#define KSYM_SYMBOL_LEN (sizeof("%s+%#lx/%#lx [%s]") + (KSYM_NAME_LEN - 1) + \
-			 2*(BITS_PER_LONG*3/10) + (MODULE_NAME_LEN - 1) + 1)
-
-struct module;
-
-#ifdef CONFIG_KALLSYMS
-/* Lookup the address for a symbol. Returns 0 if not found. */
-unsigned long kallsyms_lookup_name(const char *name);
-
-/* Call a function on each kallsyms symbol in the core kernel */
-int kallsyms_on_each_symbol(int (*fn)(void *, const char *, struct module *,
-				      unsigned long),
-			    void *data);
-
-extern int kallsyms_lookup_size_offset(unsigned long addr,
-				  unsigned long *symbolsize,
-				  unsigned long *offset);
-
-/* Lookup an address.  modname is set to NULL if it's in the kernel. */
-const char *kallsyms_lookup(unsigned long addr,
-			    unsigned long *symbolsize,
-			    unsigned long *offset,
-			    char **modname, char *namebuf);
-
-/* Look up a kernel symbol and return it in a text buffer. */
-extern int sprint_symbol(char *buffer, unsigned long address);
-extern int sprint_backtrace(char *buffer, unsigned long address);
-
-/* Look up a kernel symbol and print it to the kernel messages. */
-extern void __print_symbol(const char *fmt, unsigned long address);
-
-int lookup_symbol_name(unsigned long addr, char *symname);
-int lookup_symbol_attrs(unsigned long addr, unsigned long *size, unsigned long *offset, char *modname, char *name);
-
-#else /* !CONFIG_KALLSYMS */
-
-static inline unsigned long kallsyms_lookup_name(const char *name)
-{
-	return 0;
-}
-
-static inline int kallsyms_on_each_symbol(int (*fn)(void *, const char *,
-						    struct module *,
-						    unsigned long),
-					  void *data)
-{
-	return 0;
-}
-
-static inline int kallsyms_lookup_size_offset(unsigned long addr,
-					      unsigned long *symbolsize,
-					      unsigned long *offset)
-{
-	return 0;
-}
-
-static inline const char *kallsyms_lookup(unsigned long addr,
-					  unsigned long *symbolsize,
-					  unsigned long *offset,
-					  char **modname, char *namebuf)
-{
-	return NULL;
-}
-
-static inline int sprint_symbol(char *buffer, unsigned long addr)
-{
-	*buffer = '\0';
-	return 0;
-}
-
-static inline int sprint_backtrace(char *buffer, unsigned long addr)
-{
-	*buffer = '\0';
-	return 0;
-}
-
-static inline int lookup_symbol_name(unsigned long addr, char *symname)
-{
-	return -ERANGE;
-}
-
-static inline int lookup_symbol_attrs(unsigned long addr, unsigned long *size, unsigned long *offset, char *modname, char *name)
-{
-	return -ERANGE;
-}
-
-/* Stupid that this does nothing, but I didn't create this mess. */
-#define __print_symbol(fmt, addr)
-#endif /*CONFIG_KALLSYMS*/
-
-/* This macro allows us to keep printk typechecking */
-static __printf(1, 2)
-void __check_printsym_format(const char *fmt, ...)
-{
-}
-
-static inline void print_symbol(const char *fmt, unsigned long addr)
-{
-	__check_printsym_format(fmt, "");
-	__print_symbol(fmt, (unsigned long)
-		       __builtin_extract_return_addr((void *)addr));
-}
-
-static inline void print_ip_sym(unsigned long ip)
-{
-	printk("[<%p>] %pS\n", (void *) ip, (void *) ip);
-}
-
-#endif /*_LINUX_KALLSYMS_H*/
diff --git a/ANDROID_3.4.5/include/linux/kbd_diacr.h b/ANDROID_3.4.5/include/linux/kbd_diacr.h
deleted file mode 100644
index 7274ec68..00000000
--- a/ANDROID_3.4.5/include/linux/kbd_diacr.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef _DIACR_H
-#define _DIACR_H
-#include <linux/kd.h>
-
-extern struct kbdiacruc accent_table[];
-extern unsigned int accent_table_size;
-
-#endif /* _DIACR_H */
diff --git a/ANDROID_3.4.5/include/linux/kbd_kern.h b/ANDROID_3.4.5/include/linux/kbd_kern.h
deleted file mode 100644
index daf4a3a4..00000000
--- a/ANDROID_3.4.5/include/linux/kbd_kern.h
+++ /dev/null
@@ -1,160 +0,0 @@
-#ifndef _KBD_KERN_H
-#define _KBD_KERN_H
-
-#include <linux/tty.h>
-#include <linux/interrupt.h>
-#include <linux/keyboard.h>
-
-extern struct tasklet_struct keyboard_tasklet;
-
-extern char *func_table[MAX_NR_FUNC];
-extern char func_buf[];
-extern char *funcbufptr;
-extern int funcbufsize, funcbufleft;
-
-/*
- * kbd->xxx contains the VC-local things (flag settings etc..)
- *
- * Note: externally visible are LED_SCR, LED_NUM, LED_CAP defined in kd.h
- *       The code in KDGETLED / KDSETLED depends on the internal and
- *       external order being the same.
- *
- * Note: lockstate is used as index in the array key_map.
- */
-struct kbd_struct {
-
-	unsigned char lockstate;
-/* 8 modifiers - the names do not have any meaning at all;
-   they can be associated to arbitrarily chosen keys */
-#define VC_SHIFTLOCK	KG_SHIFT	/* shift lock mode */
-#define VC_ALTGRLOCK	KG_ALTGR	/* altgr lock mode */
-#define VC_CTRLLOCK	KG_CTRL 	/* control lock mode */
-#define VC_ALTLOCK	KG_ALT  	/* alt lock mode */
-#define VC_SHIFTLLOCK	KG_SHIFTL	/* shiftl lock mode */
-#define VC_SHIFTRLOCK	KG_SHIFTR	/* shiftr lock mode */
-#define VC_CTRLLLOCK	KG_CTRLL 	/* ctrll lock mode */
-#define VC_CTRLRLOCK	KG_CTRLR 	/* ctrlr lock mode */
-	unsigned char slockstate; 	/* for `sticky' Shift, Ctrl, etc. */
-
-	unsigned char ledmode:2; 	/* one 2-bit value */
-#define LED_SHOW_FLAGS 0        /* traditional state */
-#define LED_SHOW_IOCTL 1        /* only change leds upon ioctl */
-#define LED_SHOW_MEM 2          /* `heartbeat': peek into memory */
-
-	unsigned char ledflagstate:4;	/* flags, not lights */
-	unsigned char default_ledflagstate:4;
-#define VC_SCROLLOCK	0	/* scroll-lock mode */
-#define VC_NUMLOCK	1	/* numeric lock mode */
-#define VC_CAPSLOCK	2	/* capslock mode */
-#define VC_KANALOCK	3	/* kanalock mode */
-
-	unsigned char kbdmode:3;	/* one 3-bit value */
-#define VC_XLATE	0	/* translate keycodes using keymap */
-#define VC_MEDIUMRAW	1	/* medium raw (keycode) mode */
-#define VC_RAW		2	/* raw (scancode) mode */
-#define VC_UNICODE	3	/* Unicode mode */
-#define VC_OFF		4	/* disabled mode */
-
-	unsigned char modeflags:5;
-#define VC_APPLIC	0	/* application key mode */
-#define VC_CKMODE	1	/* cursor key mode */
-#define VC_REPEAT	2	/* keyboard repeat */
-#define VC_CRLF		3	/* 0 - enter sends CR, 1 - enter sends CRLF */
-#define VC_META		4	/* 0 - meta, 1 - meta=prefix with ESC */
-};
-
-extern int kbd_init(void);
-
-extern unsigned char getledstate(void);
-extern void setledstate(struct kbd_struct *kbd, unsigned int led);
-
-extern int do_poke_blanked_console;
-
-extern void (*kbd_ledfunc)(unsigned int led);
-
-extern int set_console(int nr);
-extern void schedule_console_callback(void);
-
-/* FIXME: review locking for vt.c callers */
-static inline void set_leds(void)
-{
-	tasklet_schedule(&keyboard_tasklet);
-}
-
-static inline int vc_kbd_mode(struct kbd_struct * kbd, int flag)
-{
-	return ((kbd->modeflags >> flag) & 1);
-}
-
-static inline int vc_kbd_led(struct kbd_struct * kbd, int flag)
-{
-	return ((kbd->ledflagstate >> flag) & 1);
-}
-
-static inline void set_vc_kbd_mode(struct kbd_struct * kbd, int flag)
-{
-	kbd->modeflags |= 1 << flag;
-}
-
-static inline void set_vc_kbd_led(struct kbd_struct * kbd, int flag)
-{
-	kbd->ledflagstate |= 1 << flag;
-}
-
-static inline void clr_vc_kbd_mode(struct kbd_struct * kbd, int flag)
-{
-	kbd->modeflags &= ~(1 << flag);
-}
-
-static inline void clr_vc_kbd_led(struct kbd_struct * kbd, int flag)
-{
-	kbd->ledflagstate &= ~(1 << flag);
-}
-
-static inline void chg_vc_kbd_lock(struct kbd_struct * kbd, int flag)
-{
-	kbd->lockstate ^= 1 << flag;
-}
-
-static inline void chg_vc_kbd_slock(struct kbd_struct * kbd, int flag)
-{
-	kbd->slockstate ^= 1 << flag;
-}
-
-static inline void chg_vc_kbd_mode(struct kbd_struct * kbd, int flag)
-{
-	kbd->modeflags ^= 1 << flag;
-}
-
-static inline void chg_vc_kbd_led(struct kbd_struct * kbd, int flag)
-{
-	kbd->ledflagstate ^= 1 << flag;
-}
-
-#define U(x) ((x) ^ 0xf000)
-
-#define BRL_UC_ROW 0x2800
-
-/* keyboard.c */
-
-struct console;
-
-void compute_shiftstate(void);
-
-/* defkeymap.c */
-
-extern unsigned int keymap_count;
-
-/* console.c */
-
-static inline void con_schedule_flip(struct tty_struct *t)
-{
-	unsigned long flags;
-	spin_lock_irqsave(&t->buf.lock, flags);
-	if (t->buf.tail != NULL)
-		t->buf.tail->commit = t->buf.tail->used;
-	spin_unlock_irqrestore(&t->buf.lock, flags);
-	schedule_work(&t->buf.work);
-}
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/kbuild.h b/ANDROID_3.4.5/include/linux/kbuild.h
deleted file mode 100644
index 22a72198..00000000
--- a/ANDROID_3.4.5/include/linux/kbuild.h
+++ /dev/null
@@ -1,15 +0,0 @@
-#ifndef __LINUX_KBUILD_H
-#define __LINUX_KBUILD_H
-
-#define DEFINE(sym, val) \
-        asm volatile("\n->" #sym " %0 " #val : : "i" (val))
-
-#define BLANK() asm volatile("\n->" : : )
-
-#define OFFSET(sym, str, mem) \
-	DEFINE(sym, offsetof(struct str, mem))
-
-#define COMMENT(x) \
-	asm volatile("\n->#" x)
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/kconfig.h b/ANDROID_3.4.5/include/linux/kconfig.h
deleted file mode 100644
index be342b94..00000000
--- a/ANDROID_3.4.5/include/linux/kconfig.h
+++ /dev/null
@@ -1,46 +0,0 @@
-#ifndef __LINUX_KCONFIG_H
-#define __LINUX_KCONFIG_H
-
-#include <generated/autoconf.h>
-
-/*
- * Helper macros to use CONFIG_ options in C/CPP expressions. Note that
- * these only work with boolean and tristate options.
- */
-
-/*
- * Getting something that works in C and CPP for an arg that may or may
- * not be defined is tricky.  Here, if we have "#define CONFIG_BOOGER 1"
- * we match on the placeholder define, insert the "0," for arg1 and generate
- * the triplet (0, 1, 0).  Then the last step cherry picks the 2nd arg (a one).
- * When CONFIG_BOOGER is not defined, we generate a (... 1, 0) pair, and when
- * the last step cherry picks the 2nd arg, we get a zero.
- */
-#define __ARG_PLACEHOLDER_1 0,
-#define config_enabled(cfg) _config_enabled(cfg)
-#define _config_enabled(value) __config_enabled(__ARG_PLACEHOLDER_##value)
-#define __config_enabled(arg1_or_junk) ___config_enabled(arg1_or_junk 1, 0)
-#define ___config_enabled(__ignored, val, ...) val
-
-/*
- * IS_ENABLED(CONFIG_FOO) evaluates to 1 if CONFIG_FOO is set to 'y' or 'm',
- * 0 otherwise.
- *
- */
-#define IS_ENABLED(option) \
-	(config_enabled(option) || config_enabled(option##_MODULE))
-
-/*
- * IS_BUILTIN(CONFIG_FOO) evaluates to 1 if CONFIG_FOO is set to 'y', 0
- * otherwise. For boolean options, this is equivalent to
- * IS_ENABLED(CONFIG_FOO).
- */
-#define IS_BUILTIN(option) config_enabled(option)
-
-/*
- * IS_MODULE(CONFIG_FOO) evaluates to 1 if CONFIG_FOO is set to 'm', 0
- * otherwise.
- */
-#define IS_MODULE(option) config_enabled(option##_MODULE)
-
-#endif /* __LINUX_KCONFIG_H */
diff --git a/ANDROID_3.4.5/include/linux/kd.h b/ANDROID_3.4.5/include/linux/kd.h
deleted file mode 100644
index c36d8476..00000000
--- a/ANDROID_3.4.5/include/linux/kd.h
+++ /dev/null
@@ -1,186 +0,0 @@
-#ifndef _LINUX_KD_H
-#define _LINUX_KD_H
-#include <linux/types.h>
-#include <linux/compiler.h>
-
-/* 0x4B is 'K', to avoid collision with termios and vt */
-
-#define GIO_FONT	0x4B60	/* gets font in expanded form */
-#define PIO_FONT	0x4B61	/* use font in expanded form */
-
-#define GIO_FONTX	0x4B6B	/* get font using struct consolefontdesc */
-#define PIO_FONTX	0x4B6C	/* set font using struct consolefontdesc */
-struct consolefontdesc {
-	unsigned short charcount;	/* characters in font (256 or 512) */
-	unsigned short charheight;	/* scan lines per character (1-32) */
-	char __user *chardata;		/* font data in expanded form */
-};
-
-#define PIO_FONTRESET   0x4B6D	/* reset to default font */
-
-#define GIO_CMAP	0x4B70	/* gets colour palette on VGA+ */
-#define PIO_CMAP	0x4B71	/* sets colour palette on VGA+ */
-
-#define KIOCSOUND	0x4B2F	/* start sound generation (0 for off) */
-#define KDMKTONE	0x4B30	/* generate tone */
-
-#define KDGETLED	0x4B31	/* return current led state */
-#define KDSETLED	0x4B32	/* set led state [lights, not flags] */
-#define 	LED_SCR		0x01	/* scroll lock led */
-#define 	LED_NUM		0x02	/* num lock led */
-#define 	LED_CAP		0x04	/* caps lock led */
-
-#define KDGKBTYPE	0x4B33	/* get keyboard type */
-#define 	KB_84		0x01
-#define 	KB_101		0x02 	/* this is what we always answer */
-#define 	KB_OTHER	0x03
-
-#define KDADDIO		0x4B34	/* add i/o port as valid */
-#define KDDELIO		0x4B35	/* del i/o port as valid */
-#define KDENABIO	0x4B36	/* enable i/o to video board */
-#define KDDISABIO	0x4B37	/* disable i/o to video board */
-
-#define KDSETMODE	0x4B3A	/* set text/graphics mode */
-#define		KD_TEXT		0x00
-#define		KD_GRAPHICS	0x01
-#define		KD_TEXT0	0x02	/* obsolete */
-#define		KD_TEXT1	0x03	/* obsolete */
-#define KDGETMODE	0x4B3B	/* get current mode */
-
-#define KDMAPDISP	0x4B3C	/* map display into address space */
-#define KDUNMAPDISP	0x4B3D	/* unmap display from address space */
-
-typedef char scrnmap_t;
-#define		E_TABSZ		256
-#define GIO_SCRNMAP	0x4B40	/* get screen mapping from kernel */
-#define PIO_SCRNMAP	0x4B41	/* put screen mapping table in kernel */
-#define GIO_UNISCRNMAP  0x4B69	/* get full Unicode screen mapping */
-#define PIO_UNISCRNMAP  0x4B6A  /* set full Unicode screen mapping */
-
-#define GIO_UNIMAP	0x4B66	/* get unicode-to-font mapping from kernel */
-struct unipair {
-	unsigned short unicode;
-	unsigned short fontpos;
-};
-struct unimapdesc {
-	unsigned short entry_ct;
-	struct unipair __user *entries;
-};
-#define PIO_UNIMAP	0x4B67	/* put unicode-to-font mapping in kernel */
-#define PIO_UNIMAPCLR	0x4B68	/* clear table, possibly advise hash algorithm */
-struct unimapinit {
-	unsigned short advised_hashsize;  /* 0 if no opinion */
-	unsigned short advised_hashstep;  /* 0 if no opinion */
-	unsigned short advised_hashlevel; /* 0 if no opinion */
-};
-
-#define UNI_DIRECT_BASE 0xF000	/* start of Direct Font Region */
-#define UNI_DIRECT_MASK 0x01FF	/* Direct Font Region bitmask */
-
-#define		K_RAW		0x00
-#define		K_XLATE		0x01
-#define		K_MEDIUMRAW	0x02
-#define		K_UNICODE	0x03
-#define		K_OFF		0x04
-#define KDGKBMODE	0x4B44	/* gets current keyboard mode */
-#define KDSKBMODE	0x4B45	/* sets current keyboard mode */
-
-#define		K_METABIT	0x03
-#define		K_ESCPREFIX	0x04
-#define KDGKBMETA	0x4B62	/* gets meta key handling mode */
-#define KDSKBMETA	0x4B63	/* sets meta key handling mode */
-
-#define		K_SCROLLLOCK	0x01
-#define		K_NUMLOCK	0x02
-#define		K_CAPSLOCK	0x04
-#define	KDGKBLED	0x4B64	/* get led flags (not lights) */
-#define	KDSKBLED	0x4B65	/* set led flags (not lights) */
-
-struct kbentry {
-	unsigned char kb_table;
-	unsigned char kb_index;
-	unsigned short kb_value;
-};
-#define		K_NORMTAB	0x00
-#define		K_SHIFTTAB	0x01
-#define		K_ALTTAB	0x02
-#define		K_ALTSHIFTTAB	0x03
-
-#define KDGKBENT	0x4B46	/* gets one entry in translation table */
-#define KDSKBENT	0x4B47	/* sets one entry in translation table */
-
-struct kbsentry {
-	unsigned char kb_func;
-	unsigned char kb_string[512];
-};
-#define KDGKBSENT	0x4B48	/* gets one function key string entry */
-#define KDSKBSENT	0x4B49	/* sets one function key string entry */
-
-struct kbdiacr {
-        unsigned char diacr, base, result;
-};
-struct kbdiacrs {
-        unsigned int kb_cnt;    /* number of entries in following array */
-	struct kbdiacr kbdiacr[256];    /* MAX_DIACR from keyboard.h */
-};
-#define KDGKBDIACR      0x4B4A  /* read kernel accent table */
-#define KDSKBDIACR      0x4B4B  /* write kernel accent table */
-
-struct kbdiacruc {
-	unsigned int diacr, base, result;
-};
-struct kbdiacrsuc {
-        unsigned int kb_cnt;    /* number of entries in following array */
-	struct kbdiacruc kbdiacruc[256];    /* MAX_DIACR from keyboard.h */
-};
-#define KDGKBDIACRUC    0x4BFA  /* read kernel accent table - UCS */
-#define KDSKBDIACRUC    0x4BFB  /* write kernel accent table - UCS */
-
-struct kbkeycode {
-	unsigned int scancode, keycode;
-};
-#define KDGETKEYCODE	0x4B4C	/* read kernel keycode table entry */
-#define KDSETKEYCODE	0x4B4D	/* write kernel keycode table entry */
-
-#define KDSIGACCEPT	0x4B4E	/* accept kbd generated signals */
-
-struct kbd_repeat {
-	int delay;	/* in msec; <= 0: don't change */
-	int period;	/* in msec; <= 0: don't change */
-			/* earlier this field was misnamed "rate" */
-};
-
-#define KDKBDREP        0x4B52  /* set keyboard delay/repeat rate;
-				 * actually used values are returned */
-
-#define KDFONTOP	0x4B72	/* font operations */
-
-struct console_font_op {
-	unsigned int op;	/* operation code KD_FONT_OP_* */
-	unsigned int flags;	/* KD_FONT_FLAG_* */
-	unsigned int width, height;	/* font size */
-	unsigned int charcount;
-	unsigned char __user *data;	/* font data with height fixed to 32 */
-};
-
-struct console_font {
-	unsigned int width, height;	/* font size */
-	unsigned int charcount;
-	unsigned char *data;	/* font data with height fixed to 32 */
-};
-
-#define KD_FONT_OP_SET		0	/* Set font */
-#define KD_FONT_OP_GET		1	/* Get font */
-#define KD_FONT_OP_SET_DEFAULT	2	/* Set font to default, data points to name / NULL */
-#define KD_FONT_OP_COPY		3	/* Copy from another console */
-
-#define KD_FONT_FLAG_DONT_RECALC 	1	/* Don't recalculate hw charcell size [compat] */
-#ifdef __KERNEL__
-#define KD_FONT_FLAG_OLD		0x80000000	/* Invoked via old interface [compat] */
-#endif
-
-/* note: 0x4B00-0x4B4E all have had a value at some time;
-   don't reuse for the time being */
-/* note: 0x4B60-0x4B6D, 0x4B70-0x4B72 used above */
-
-#endif /* _LINUX_KD_H */
diff --git a/ANDROID_3.4.5/include/linux/kdb.h b/ANDROID_3.4.5/include/linux/kdb.h
deleted file mode 100644
index 06472585..00000000
--- a/ANDROID_3.4.5/include/linux/kdb.h
+++ /dev/null
@@ -1,169 +0,0 @@
-#ifndef _KDB_H
-#define _KDB_H
-
-/*
- * Kernel Debugger Architecture Independent Global Headers
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (c) 2000-2007 Silicon Graphics, Inc.  All Rights Reserved.
- * Copyright (C) 2000 Stephane Eranian <eranian@hpl.hp.com>
- * Copyright (C) 2009 Jason Wessel <jason.wessel@windriver.com>
- */
-
-#ifdef	CONFIG_KGDB_KDB
-#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/atomic.h>
-
-#define KDB_POLL_FUNC_MAX	5
-extern int kdb_poll_idx;
-
-/*
- * kdb_initial_cpu is initialized to -1, and is set to the cpu
- * number whenever the kernel debugger is entered.
- */
-extern int kdb_initial_cpu;
-extern atomic_t kdb_event;
-
-/* Types and messages used for dynamically added kdb shell commands */
-
-#define KDB_MAXARGS    16 /* Maximum number of arguments to a function  */
-
-typedef enum {
-	KDB_REPEAT_NONE = 0,	/* Do not repeat this command */
-	KDB_REPEAT_NO_ARGS,	/* Repeat the command without arguments */
-	KDB_REPEAT_WITH_ARGS,	/* Repeat the command including its arguments */
-} kdb_repeat_t;
-
-typedef int (*kdb_func_t)(int, const char **);
-
-/* KDB return codes from a command or internal kdb function */
-#define KDB_NOTFOUND	(-1)
-#define KDB_ARGCOUNT	(-2)
-#define KDB_BADWIDTH	(-3)
-#define KDB_BADRADIX	(-4)
-#define KDB_NOTENV	(-5)
-#define KDB_NOENVVALUE	(-6)
-#define KDB_NOTIMP	(-7)
-#define KDB_ENVFULL	(-8)
-#define KDB_ENVBUFFULL	(-9)
-#define KDB_TOOMANYBPT	(-10)
-#define KDB_TOOMANYDBREGS (-11)
-#define KDB_DUPBPT	(-12)
-#define KDB_BPTNOTFOUND	(-13)
-#define KDB_BADMODE	(-14)
-#define KDB_BADINT	(-15)
-#define KDB_INVADDRFMT  (-16)
-#define KDB_BADREG      (-17)
-#define KDB_BADCPUNUM   (-18)
-#define KDB_BADLENGTH	(-19)
-#define KDB_NOBP	(-20)
-#define KDB_BADADDR	(-21)
-
-/*
- * kdb_diemsg
- *
- *	Contains a pointer to the last string supplied to the
- *	kernel 'die' panic function.
- */
-extern const char *kdb_diemsg;
-
-#define KDB_FLAG_EARLYKDB	(1 << 0) /* set from boot parameter kdb=early */
-#define KDB_FLAG_CATASTROPHIC	(1 << 1) /* A catastrophic event has occurred */
-#define KDB_FLAG_CMD_INTERRUPT	(1 << 2) /* Previous command was interrupted */
-#define KDB_FLAG_NOIPI		(1 << 3) /* Do not send IPIs */
-#define KDB_FLAG_ONLY_DO_DUMP	(1 << 4) /* Only do a dump, used when
-					  * kdb is off */
-#define KDB_FLAG_NO_CONSOLE	(1 << 5) /* No console is available,
-					  * kdb is disabled */
-#define KDB_FLAG_NO_VT_CONSOLE	(1 << 6) /* No VT console is available, do
-					  * not use keyboard */
-#define KDB_FLAG_NO_I8042	(1 << 7) /* No i8042 chip is available, do
-					  * not use keyboard */
-
-extern int kdb_flags;	/* Global flags, see kdb_state for per cpu state */
-
-extern void kdb_save_flags(void);
-extern void kdb_restore_flags(void);
-
-#define KDB_FLAG(flag)		(kdb_flags & KDB_FLAG_##flag)
-#define KDB_FLAG_SET(flag)	((void)(kdb_flags |= KDB_FLAG_##flag))
-#define KDB_FLAG_CLEAR(flag)	((void)(kdb_flags &= ~KDB_FLAG_##flag))
-
-/*
- * External entry point for the kernel debugger.  The pt_regs
- * at the time of entry are supplied along with the reason for
- * entry to the kernel debugger.
- */
-
-typedef enum {
-	KDB_REASON_ENTER = 1,	/* KDB_ENTER() trap/fault - regs valid */
-	KDB_REASON_ENTER_SLAVE,	/* KDB_ENTER_SLAVE() trap/fault - regs valid */
-	KDB_REASON_BREAK,	/* Breakpoint inst. - regs valid */
-	KDB_REASON_DEBUG,	/* Debug Fault - regs valid */
-	KDB_REASON_OOPS,	/* Kernel Oops - regs valid */
-	KDB_REASON_SWITCH,	/* CPU switch - regs valid*/
-	KDB_REASON_KEYBOARD,	/* Keyboard entry - regs valid */
-	KDB_REASON_NMI,		/* Non-maskable interrupt; regs valid */
-	KDB_REASON_RECURSE,	/* Recursive entry to kdb;
-				 * regs probably valid */
-	KDB_REASON_SSTEP,	/* Single Step trap. - regs valid */
-} kdb_reason_t;
-
-extern int kdb_trap_printk;
-extern __printf(1, 0) int vkdb_printf(const char *fmt, va_list args);
-extern __printf(1, 2) int kdb_printf(const char *, ...);
-typedef __printf(1, 2) int (*kdb_printf_t)(const char *, ...);
-
-extern void kdb_init(int level);
-
-/* Access to kdb specific polling devices */
-typedef int (*get_char_func)(void);
-extern get_char_func kdb_poll_funcs[];
-extern int kdb_get_kbd_char(void);
-
-static inline
-int kdb_process_cpu(const struct task_struct *p)
-{
-	unsigned int cpu = task_thread_info(p)->cpu;
-	if (cpu > num_possible_cpus())
-		cpu = 0;
-	return cpu;
-}
-
-/* kdb access to register set for stack dumping */
-extern struct pt_regs *kdb_current_regs;
-#ifdef CONFIG_KALLSYMS
-extern const char *kdb_walk_kallsyms(loff_t *pos);
-#else /* ! CONFIG_KALLSYMS */
-static inline const char *kdb_walk_kallsyms(loff_t *pos)
-{
-	return NULL;
-}
-#endif /* ! CONFIG_KALLSYMS */
-
-/* Dynamic kdb shell command registration */
-extern int kdb_register(char *, kdb_func_t, char *, char *, short);
-extern int kdb_register_repeat(char *, kdb_func_t, char *, char *,
-			       short, kdb_repeat_t);
-extern int kdb_unregister(char *);
-#else /* ! CONFIG_KGDB_KDB */
-#define kdb_printf(...)
-#define kdb_init(x)
-#define kdb_register(...)
-#define kdb_register_repeat(...)
-#define kdb_uregister(x)
-#endif	/* CONFIG_KGDB_KDB */
-enum {
-	KDB_NOT_INITIALIZED,
-	KDB_INIT_EARLY,
-	KDB_INIT_FULL,
-};
-
-extern int kdbgetintenv(const char *, int *);
-extern int kdb_set(int, const char **);
-
-#endif	/* !_KDB_H */
diff --git a/ANDROID_3.4.5/include/linux/kdebug.h b/ANDROID_3.4.5/include/linux/kdebug.h
deleted file mode 100644
index ed815090..00000000
--- a/ANDROID_3.4.5/include/linux/kdebug.h
+++ /dev/null
@@ -1,22 +0,0 @@
-#ifndef _LINUX_KDEBUG_H
-#define _LINUX_KDEBUG_H
-
-#include <asm/kdebug.h>
-
-struct notifier_block;
-
-struct die_args {
-	struct pt_regs *regs;
-	const char *str;
-	long err;
-	int trapnr;
-	int signr;
-};
-
-int register_die_notifier(struct notifier_block *nb);
-int unregister_die_notifier(struct notifier_block *nb);
-
-int notify_die(enum die_val val, const char *str,
-	       struct pt_regs *regs, long err, int trap, int sig);
-
-#endif /* _LINUX_KDEBUG_H */
diff --git a/ANDROID_3.4.5/include/linux/kdev_t.h b/ANDROID_3.4.5/include/linux/kdev_t.h
deleted file mode 100644
index 2dacab8b..00000000
--- a/ANDROID_3.4.5/include/linux/kdev_t.h
+++ /dev/null
@@ -1,100 +0,0 @@
-#ifndef _LINUX_KDEV_T_H
-#define _LINUX_KDEV_T_H
-#ifdef __KERNEL__
-#define MINORBITS	20
-#define MINORMASK	((1U << MINORBITS) - 1)
-
-#define MAJOR(dev)	((unsigned int) ((dev) >> MINORBITS))
-#define MINOR(dev)	((unsigned int) ((dev) & MINORMASK))
-#define MKDEV(ma,mi)	(((ma) << MINORBITS) | (mi))
-
-#define print_dev_t(buffer, dev)					\
-	sprintf((buffer), "%u:%u\n", MAJOR(dev), MINOR(dev))
-
-#define format_dev_t(buffer, dev)					\
-	({								\
-		sprintf(buffer, "%u:%u", MAJOR(dev), MINOR(dev));	\
-		buffer;							\
-	})
-
-/* acceptable for old filesystems */
-static inline int old_valid_dev(dev_t dev)
-{
-	return MAJOR(dev) < 256 && MINOR(dev) < 256;
-}
-
-static inline u16 old_encode_dev(dev_t dev)
-{
-	return (MAJOR(dev) << 8) | MINOR(dev);
-}
-
-static inline dev_t old_decode_dev(u16 val)
-{
-	return MKDEV((val >> 8) & 255, val & 255);
-}
-
-static inline int new_valid_dev(dev_t dev)
-{
-	return 1;
-}
-
-static inline u32 new_encode_dev(dev_t dev)
-{
-	unsigned major = MAJOR(dev);
-	unsigned minor = MINOR(dev);
-	return (minor & 0xff) | (major << 8) | ((minor & ~0xff) << 12);
-}
-
-static inline dev_t new_decode_dev(u32 dev)
-{
-	unsigned major = (dev & 0xfff00) >> 8;
-	unsigned minor = (dev & 0xff) | ((dev >> 12) & 0xfff00);
-	return MKDEV(major, minor);
-}
-
-static inline int huge_valid_dev(dev_t dev)
-{
-	return 1;
-}
-
-static inline u64 huge_encode_dev(dev_t dev)
-{
-	return new_encode_dev(dev);
-}
-
-static inline dev_t huge_decode_dev(u64 dev)
-{
-	return new_decode_dev(dev);
-}
-
-static inline int sysv_valid_dev(dev_t dev)
-{
-	return MAJOR(dev) < (1<<14) && MINOR(dev) < (1<<18);
-}
-
-static inline u32 sysv_encode_dev(dev_t dev)
-{
-	return MINOR(dev) | (MAJOR(dev) << 18);
-}
-
-static inline unsigned sysv_major(u32 dev)
-{
-	return (dev >> 18) & 0x3fff;
-}
-
-static inline unsigned sysv_minor(u32 dev)
-{
-	return dev & 0x3ffff;
-}
-
-#else /* __KERNEL__ */
-
-/*
-Some programs want their definitions of MAJOR and MINOR and MKDEV
-from the kernel sources. These must be the externally visible ones.
-*/
-#define MAJOR(dev)	((dev)>>8)
-#define MINOR(dev)	((dev) & 0xff)
-#define MKDEV(ma,mi)	((ma)<<8 | (mi))
-#endif /* __KERNEL__ */
-#endif
diff --git a/ANDROID_3.4.5/include/linux/kernel-page-flags.h b/ANDROID_3.4.5/include/linux/kernel-page-flags.h
deleted file mode 100644
index a1bdf696..00000000
--- a/ANDROID_3.4.5/include/linux/kernel-page-flags.h
+++ /dev/null
@@ -1,51 +0,0 @@
-#ifndef LINUX_KERNEL_PAGE_FLAGS_H
-#define LINUX_KERNEL_PAGE_FLAGS_H
-
-/*
- * Stable page flag bits exported to user space
- */
-
-#define KPF_LOCKED		0
-#define KPF_ERROR		1
-#define KPF_REFERENCED		2
-#define KPF_UPTODATE		3
-#define KPF_DIRTY		4
-#define KPF_LRU			5
-#define KPF_ACTIVE		6
-#define KPF_SLAB		7
-#define KPF_WRITEBACK		8
-#define KPF_RECLAIM		9
-#define KPF_BUDDY		10
-
-/* 11-20: new additions in 2.6.31 */
-#define KPF_MMAP		11
-#define KPF_ANON		12
-#define KPF_SWAPCACHE		13
-#define KPF_SWAPBACKED		14
-#define KPF_COMPOUND_HEAD	15
-#define KPF_COMPOUND_TAIL	16
-#define KPF_HUGE		17
-#define KPF_UNEVICTABLE		18
-#define KPF_HWPOISON		19
-#define KPF_NOPAGE		20
-
-#define KPF_KSM			21
-#define KPF_THP			22
-
-#ifdef __KERNEL__
-
-/* kernel hacking assistances
- * WARNING: subject to change, never rely on them!
- */
-#define KPF_RESERVED		32
-#define KPF_MLOCKED		33
-#define KPF_MAPPEDTODISK	34
-#define KPF_PRIVATE		35
-#define KPF_PRIVATE_2		36
-#define KPF_OWNER_PRIVATE	37
-#define KPF_ARCH		38
-#define KPF_UNCACHED		39
-
-#endif /* __KERNEL__ */
-
-#endif /* LINUX_KERNEL_PAGE_FLAGS_H */
diff --git a/ANDROID_3.4.5/include/linux/kernel.h b/ANDROID_3.4.5/include/linux/kernel.h
deleted file mode 100644
index 747404ab..00000000
--- a/ANDROID_3.4.5/include/linux/kernel.h
+++ /dev/null
@@ -1,713 +0,0 @@
-#ifndef _LINUX_KERNEL_H
-#define _LINUX_KERNEL_H
-
-#include <linux/sysinfo.h>
-
-/*
- * 'kernel.h' contains some often-used function prototypes etc
- */
-#define __ALIGN_KERNEL(x, a)		__ALIGN_KERNEL_MASK(x, (typeof(x))(a) - 1)
-#define __ALIGN_KERNEL_MASK(x, mask)	(((x) + (mask)) & ~(mask))
-
-#ifdef __KERNEL__
-
-#include <stdarg.h>
-#include <linux/linkage.h>
-#include <linux/stddef.h>
-#include <linux/types.h>
-#include <linux/compiler.h>
-#include <linux/bitops.h>
-#include <linux/log2.h>
-#include <linux/typecheck.h>
-#include <linux/printk.h>
-#include <linux/dynamic_debug.h>
-#include <asm/byteorder.h>
-
-#define USHRT_MAX	((u16)(~0U))
-#define SHRT_MAX	((s16)(USHRT_MAX>>1))
-#define SHRT_MIN	((s16)(-SHRT_MAX - 1))
-#define INT_MAX		((int)(~0U>>1))
-#define INT_MIN		(-INT_MAX - 1)
-#define UINT_MAX	(~0U)
-#define LONG_MAX	((long)(~0UL>>1))
-#define LONG_MIN	(-LONG_MAX - 1)
-#define ULONG_MAX	(~0UL)
-#define LLONG_MAX	((long long)(~0ULL>>1))
-#define LLONG_MIN	(-LLONG_MAX - 1)
-#define ULLONG_MAX	(~0ULL)
-
-#define STACK_MAGIC	0xdeadbeef
-
-#define ALIGN(x, a)		__ALIGN_KERNEL((x), (a))
-#define __ALIGN_MASK(x, mask)	__ALIGN_KERNEL_MASK((x), (mask))
-#define PTR_ALIGN(p, a)		((typeof(p))ALIGN((unsigned long)(p), (a)))
-#define IS_ALIGNED(x, a)		(((x) & ((typeof(x))(a) - 1)) == 0)
-
-#define ARRAY_SIZE(arr) (sizeof(arr) / sizeof((arr)[0]) + __must_be_array(arr))
-
-/*
- * This looks more complex than it should be. But we need to
- * get the type for the ~ right in round_down (it needs to be
- * as wide as the result!), and we want to evaluate the macro
- * arguments just once each.
- */
-#define __round_mask(x, y) ((__typeof__(x))((y)-1))
-#define round_up(x, y) ((((x)-1) | __round_mask(x, y))+1)
-#define round_down(x, y) ((x) & ~__round_mask(x, y))
-
-#define FIELD_SIZEOF(t, f) (sizeof(((t*)0)->f))
-#define DIV_ROUND_UP(n,d) (((n) + (d) - 1) / (d))
-#define DIV_ROUND_UP_ULL(ll,d) \
-	({ unsigned long long _tmp = (ll)+(d)-1; do_div(_tmp, d); _tmp; })
-
-#if BITS_PER_LONG == 32
-# define DIV_ROUND_UP_SECTOR_T(ll,d) DIV_ROUND_UP_ULL(ll, d)
-#else
-# define DIV_ROUND_UP_SECTOR_T(ll,d) DIV_ROUND_UP(ll,d)
-#endif
-
-/* The `const' in roundup() prevents gcc-3.3 from calling __divdi3 */
-#define roundup(x, y) (					\
-{							\
-	const typeof(y) __y = y;			\
-	(((x) + (__y - 1)) / __y) * __y;		\
-}							\
-)
-#define rounddown(x, y) (				\
-{							\
-	typeof(x) __x = (x);				\
-	__x - (__x % (y));				\
-}							\
-)
-#define DIV_ROUND_CLOSEST(x, divisor)(			\
-{							\
-	typeof(divisor) __divisor = divisor;		\
-	(((x) + ((__divisor) / 2)) / (__divisor));	\
-}							\
-)
-
-/*
- * Multiplies an integer by a fraction, while avoiding unnecessary
- * overflow or loss of precision.
- */
-#define mult_frac(x, numer, denom)(			\
-{							\
-	typeof(x) quot = (x) / (denom);			\
-	typeof(x) rem  = (x) % (denom);			\
-	(quot * (numer)) + ((rem * (numer)) / (denom));	\
-}							\
-)
-
-
-#define _RET_IP_		(unsigned long)__builtin_return_address(0)
-#define _THIS_IP_  ({ __label__ __here; __here: (unsigned long)&&__here; })
-
-#ifdef CONFIG_LBDAF
-# include <asm/div64.h>
-# define sector_div(a, b) do_div(a, b)
-#else
-# define sector_div(n, b)( \
-{ \
-	int _res; \
-	_res = (n) % (b); \
-	(n) /= (b); \
-	_res; \
-} \
-)
-#endif
-
-/**
- * upper_32_bits - return bits 32-63 of a number
- * @n: the number we're accessing
- *
- * A basic shift-right of a 64- or 32-bit quantity.  Use this to suppress
- * the "right shift count >= width of type" warning when that quantity is
- * 32-bits.
- */
-#define upper_32_bits(n) ((u32)(((n) >> 16) >> 16))
-
-/**
- * lower_32_bits - return bits 0-31 of a number
- * @n: the number we're accessing
- */
-#define lower_32_bits(n) ((u32)(n))
-
-struct completion;
-struct pt_regs;
-struct user;
-
-#ifdef CONFIG_PREEMPT_VOLUNTARY
-extern int _cond_resched(void);
-# define might_resched() _cond_resched()
-#else
-# define might_resched() do { } while (0)
-#endif
-
-#ifdef CONFIG_DEBUG_ATOMIC_SLEEP
-  void __might_sleep(const char *file, int line, int preempt_offset);
-/**
- * might_sleep - annotation for functions that can sleep
- *
- * this macro will print a stack trace if it is executed in an atomic
- * context (spinlock, irq-handler, ...).
- *
- * This is a useful debugging help to be able to catch problems early and not
- * be bitten later when the calling function happens to sleep when it is not
- * supposed to.
- */
-# define might_sleep() \
-	do { __might_sleep(__FILE__, __LINE__, 0); might_resched(); } while (0)
-#else
-  static inline void __might_sleep(const char *file, int line,
-				   int preempt_offset) { }
-# define might_sleep() do { might_resched(); } while (0)
-#endif
-
-#define might_sleep_if(cond) do { if (cond) might_sleep(); } while (0)
-
-/*
- * abs() handles unsigned and signed longs, ints, shorts and chars.  For all
- * input types abs() returns a signed long.
- * abs() should not be used for 64-bit types (s64, u64, long long) - use abs64()
- * for those.
- */
-#define abs(x) ({						\
-		long ret;					\
-		if (sizeof(x) == sizeof(long)) {		\
-			long __x = (x);				\
-			ret = (__x < 0) ? -__x : __x;		\
-		} else {					\
-			int __x = (x);				\
-			ret = (__x < 0) ? -__x : __x;		\
-		}						\
-		ret;						\
-	})
-
-#define abs64(x) ({				\
-		s64 __x = (x);			\
-		(__x < 0) ? -__x : __x;		\
-	})
-
-#ifdef CONFIG_PROVE_LOCKING
-void might_fault(void);
-#else
-static inline void might_fault(void)
-{
-	might_sleep();
-}
-#endif
-
-extern struct atomic_notifier_head panic_notifier_list;
-extern long (*panic_blink)(int state);
-__printf(1, 2)
-void panic(const char *fmt, ...)
-	__noreturn __cold;
-extern void oops_enter(void);
-extern void oops_exit(void);
-void print_oops_end_marker(void);
-extern int oops_may_print(void);
-void do_exit(long error_code)
-	__noreturn;
-void complete_and_exit(struct completion *, long)
-	__noreturn;
-
-/* Internal, do not use. */
-int __must_check _kstrtoul(const char *s, unsigned int base, unsigned long *res);
-int __must_check _kstrtol(const char *s, unsigned int base, long *res);
-
-int __must_check kstrtoull(const char *s, unsigned int base, unsigned long long *res);
-int __must_check kstrtoll(const char *s, unsigned int base, long long *res);
-static inline int __must_check kstrtoul(const char *s, unsigned int base, unsigned long *res)
-{
-	/*
-	 * We want to shortcut function call, but
-	 * __builtin_types_compatible_p(unsigned long, unsigned long long) = 0.
-	 */
-	if (sizeof(unsigned long) == sizeof(unsigned long long) &&
-	    __alignof__(unsigned long) == __alignof__(unsigned long long))
-		return kstrtoull(s, base, (unsigned long long *)res);
-	else
-		return _kstrtoul(s, base, res);
-}
-
-static inline int __must_check kstrtol(const char *s, unsigned int base, long *res)
-{
-	/*
-	 * We want to shortcut function call, but
-	 * __builtin_types_compatible_p(long, long long) = 0.
-	 */
-	if (sizeof(long) == sizeof(long long) &&
-	    __alignof__(long) == __alignof__(long long))
-		return kstrtoll(s, base, (long long *)res);
-	else
-		return _kstrtol(s, base, res);
-}
-
-int __must_check kstrtouint(const char *s, unsigned int base, unsigned int *res);
-int __must_check kstrtoint(const char *s, unsigned int base, int *res);
-
-static inline int __must_check kstrtou64(const char *s, unsigned int base, u64 *res)
-{
-	return kstrtoull(s, base, res);
-}
-
-static inline int __must_check kstrtos64(const char *s, unsigned int base, s64 *res)
-{
-	return kstrtoll(s, base, res);
-}
-
-static inline int __must_check kstrtou32(const char *s, unsigned int base, u32 *res)
-{
-	return kstrtouint(s, base, res);
-}
-
-static inline int __must_check kstrtos32(const char *s, unsigned int base, s32 *res)
-{
-	return kstrtoint(s, base, res);
-}
-
-int __must_check kstrtou16(const char *s, unsigned int base, u16 *res);
-int __must_check kstrtos16(const char *s, unsigned int base, s16 *res);
-int __must_check kstrtou8(const char *s, unsigned int base, u8 *res);
-int __must_check kstrtos8(const char *s, unsigned int base, s8 *res);
-
-int __must_check kstrtoull_from_user(const char __user *s, size_t count, unsigned int base, unsigned long long *res);
-int __must_check kstrtoll_from_user(const char __user *s, size_t count, unsigned int base, long long *res);
-int __must_check kstrtoul_from_user(const char __user *s, size_t count, unsigned int base, unsigned long *res);
-int __must_check kstrtol_from_user(const char __user *s, size_t count, unsigned int base, long *res);
-int __must_check kstrtouint_from_user(const char __user *s, size_t count, unsigned int base, unsigned int *res);
-int __must_check kstrtoint_from_user(const char __user *s, size_t count, unsigned int base, int *res);
-int __must_check kstrtou16_from_user(const char __user *s, size_t count, unsigned int base, u16 *res);
-int __must_check kstrtos16_from_user(const char __user *s, size_t count, unsigned int base, s16 *res);
-int __must_check kstrtou8_from_user(const char __user *s, size_t count, unsigned int base, u8 *res);
-int __must_check kstrtos8_from_user(const char __user *s, size_t count, unsigned int base, s8 *res);
-
-static inline int __must_check kstrtou64_from_user(const char __user *s, size_t count, unsigned int base, u64 *res)
-{
-	return kstrtoull_from_user(s, count, base, res);
-}
-
-static inline int __must_check kstrtos64_from_user(const char __user *s, size_t count, unsigned int base, s64 *res)
-{
-	return kstrtoll_from_user(s, count, base, res);
-}
-
-static inline int __must_check kstrtou32_from_user(const char __user *s, size_t count, unsigned int base, u32 *res)
-{
-	return kstrtouint_from_user(s, count, base, res);
-}
-
-static inline int __must_check kstrtos32_from_user(const char __user *s, size_t count, unsigned int base, s32 *res)
-{
-	return kstrtoint_from_user(s, count, base, res);
-}
-
-/* Obsolete, do not use.  Use kstrto<foo> instead */
-
-extern unsigned long simple_strtoul(const char *,char **,unsigned int);
-extern long simple_strtol(const char *,char **,unsigned int);
-extern unsigned long long simple_strtoull(const char *,char **,unsigned int);
-extern long long simple_strtoll(const char *,char **,unsigned int);
-#define strict_strtoul	kstrtoul
-#define strict_strtol	kstrtol
-#define strict_strtoull	kstrtoull
-#define strict_strtoll	kstrtoll
-
-extern int num_to_str(char *buf, int size, unsigned long long num);
-
-/* lib/printf utilities */
-
-extern __printf(2, 3) int sprintf(char *buf, const char * fmt, ...);
-extern __printf(2, 0) int vsprintf(char *buf, const char *, va_list);
-extern __printf(3, 4)
-int snprintf(char *buf, size_t size, const char *fmt, ...);
-extern __printf(3, 0)
-int vsnprintf(char *buf, size_t size, const char *fmt, va_list args);
-extern __printf(3, 4)
-int scnprintf(char *buf, size_t size, const char *fmt, ...);
-extern __printf(3, 0)
-int vscnprintf(char *buf, size_t size, const char *fmt, va_list args);
-extern __printf(2, 3)
-char *kasprintf(gfp_t gfp, const char *fmt, ...);
-extern char *kvasprintf(gfp_t gfp, const char *fmt, va_list args);
-
-extern __scanf(2, 3)
-int sscanf(const char *, const char *, ...);
-extern __scanf(2, 0)
-int vsscanf(const char *, const char *, va_list);
-
-extern int get_option(char **str, int *pint);
-extern char *get_options(const char *str, int nints, int *ints);
-extern unsigned long long memparse(const char *ptr, char **retptr);
-
-extern int core_kernel_text(unsigned long addr);
-extern int core_kernel_data(unsigned long addr);
-extern int __kernel_text_address(unsigned long addr);
-extern int kernel_text_address(unsigned long addr);
-extern int func_ptr_is_kernel_text(void *ptr);
-
-struct pid;
-extern struct pid *session_of_pgrp(struct pid *pgrp);
-
-unsigned long int_sqrt(unsigned long);
-
-extern void bust_spinlocks(int yes);
-extern void wake_up_klogd(void);
-extern int oops_in_progress;		/* If set, an oops, panic(), BUG() or die() is in progress */
-extern int panic_timeout;
-extern int panic_on_oops;
-extern int panic_on_unrecovered_nmi;
-extern int panic_on_io_nmi;
-extern int sysctl_panic_on_stackoverflow;
-extern const char *print_tainted(void);
-extern void add_taint(unsigned flag);
-extern int test_taint(unsigned flag);
-extern unsigned long get_taint(void);
-extern int root_mountflags;
-
-extern bool early_boot_irqs_disabled;
-
-/* Values used for system_state */
-extern enum system_states {
-	SYSTEM_BOOTING,
-	SYSTEM_RUNNING,
-	SYSTEM_HALT,
-	SYSTEM_POWER_OFF,
-	SYSTEM_RESTART,
-	SYSTEM_SUSPEND_DISK,
-} system_state;
-
-#define TAINT_PROPRIETARY_MODULE	0
-#define TAINT_FORCED_MODULE		1
-#define TAINT_UNSAFE_SMP		2
-#define TAINT_FORCED_RMMOD		3
-#define TAINT_MACHINE_CHECK		4
-#define TAINT_BAD_PAGE			5
-#define TAINT_USER			6
-#define TAINT_DIE			7
-#define TAINT_OVERRIDDEN_ACPI_TABLE	8
-#define TAINT_WARN			9
-#define TAINT_CRAP			10
-#define TAINT_FIRMWARE_WORKAROUND	11
-#define TAINT_OOT_MODULE		12
-
-extern const char hex_asc[];
-#define hex_asc_lo(x)	hex_asc[((x) & 0x0f)]
-#define hex_asc_hi(x)	hex_asc[((x) & 0xf0) >> 4]
-
-static inline char *hex_byte_pack(char *buf, u8 byte)
-{
-	*buf++ = hex_asc_hi(byte);
-	*buf++ = hex_asc_lo(byte);
-	return buf;
-}
-
-static inline char * __deprecated pack_hex_byte(char *buf, u8 byte)
-{
-	return hex_byte_pack(buf, byte);
-}
-
-extern int hex_to_bin(char ch);
-extern int __must_check hex2bin(u8 *dst, const char *src, size_t count);
-
-/*
- * General tracing related utility functions - trace_printk(),
- * tracing_on/tracing_off and tracing_start()/tracing_stop
- *
- * Use tracing_on/tracing_off when you want to quickly turn on or off
- * tracing. It simply enables or disables the recording of the trace events.
- * This also corresponds to the user space /sys/kernel/debug/tracing/tracing_on
- * file, which gives a means for the kernel and userspace to interact.
- * Place a tracing_off() in the kernel where you want tracing to end.
- * From user space, examine the trace, and then echo 1 > tracing_on
- * to continue tracing.
- *
- * tracing_stop/tracing_start has slightly more overhead. It is used
- * by things like suspend to ram where disabling the recording of the
- * trace is not enough, but tracing must actually stop because things
- * like calling smp_processor_id() may crash the system.
- *
- * Most likely, you want to use tracing_on/tracing_off.
- */
-#ifdef CONFIG_RING_BUFFER
-/* trace_off_permanent stops recording with no way to bring it back */
-void tracing_off_permanent(void);
-#else
-static inline void tracing_off_permanent(void) { }
-#endif
-
-enum ftrace_dump_mode {
-	DUMP_NONE,
-	DUMP_ALL,
-	DUMP_ORIG,
-};
-
-#ifdef CONFIG_TRACING
-void tracing_on(void);
-void tracing_off(void);
-int tracing_is_on(void);
-
-extern void tracing_start(void);
-extern void tracing_stop(void);
-extern void ftrace_off_permanent(void);
-
-static inline __printf(1, 2)
-void ____trace_printk_check_format(const char *fmt, ...)
-{
-}
-#define __trace_printk_check_format(fmt, args...)			\
-do {									\
-	if (0)								\
-		____trace_printk_check_format(fmt, ##args);		\
-} while (0)
-
-/**
- * trace_printk - printf formatting in the ftrace buffer
- * @fmt: the printf format for printing
- *
- * Note: __trace_printk is an internal function for trace_printk and
- *       the @ip is passed in via the trace_printk macro.
- *
- * This function allows a kernel developer to debug fast path sections
- * that printk is not appropriate for. By scattering in various
- * printk like tracing in the code, a developer can quickly see
- * where problems are occurring.
- *
- * This is intended as a debugging tool for the developer only.
- * Please refrain from leaving trace_printks scattered around in
- * your code.
- */
-
-#define trace_printk(fmt, args...)					\
-do {									\
-	__trace_printk_check_format(fmt, ##args);			\
-	if (__builtin_constant_p(fmt)) {				\
-		static const char *trace_printk_fmt			\
-		  __attribute__((section("__trace_printk_fmt"))) =	\
-			__builtin_constant_p(fmt) ? fmt : NULL;		\
-									\
-		__trace_bprintk(_THIS_IP_, trace_printk_fmt, ##args);	\
-	} else								\
-		__trace_printk(_THIS_IP_, fmt, ##args);		\
-} while (0)
-
-extern __printf(2, 3)
-int __trace_bprintk(unsigned long ip, const char *fmt, ...);
-
-extern __printf(2, 3)
-int __trace_printk(unsigned long ip, const char *fmt, ...);
-
-extern void trace_dump_stack(void);
-
-/*
- * The double __builtin_constant_p is because gcc will give us an error
- * if we try to allocate the static variable to fmt if it is not a
- * constant. Even with the outer if statement.
- */
-#define ftrace_vprintk(fmt, vargs)					\
-do {									\
-	if (__builtin_constant_p(fmt)) {				\
-		static const char *trace_printk_fmt			\
-		  __attribute__((section("__trace_printk_fmt"))) =	\
-			__builtin_constant_p(fmt) ? fmt : NULL;		\
-									\
-		__ftrace_vbprintk(_THIS_IP_, trace_printk_fmt, vargs);	\
-	} else								\
-		__ftrace_vprintk(_THIS_IP_, fmt, vargs);		\
-} while (0)
-
-extern int
-__ftrace_vbprintk(unsigned long ip, const char *fmt, va_list ap);
-
-extern int
-__ftrace_vprintk(unsigned long ip, const char *fmt, va_list ap);
-
-extern void ftrace_dump(enum ftrace_dump_mode oops_dump_mode);
-#else
-static inline __printf(1, 2)
-int trace_printk(const char *fmt, ...);
-
-static inline void tracing_start(void) { }
-static inline void tracing_stop(void) { }
-static inline void ftrace_off_permanent(void) { }
-static inline void trace_dump_stack(void) { }
-
-static inline void tracing_on(void) { }
-static inline void tracing_off(void) { }
-static inline int tracing_is_on(void) { return 0; }
-
-static inline int
-trace_printk(const char *fmt, ...)
-{
-	return 0;
-}
-static inline int
-ftrace_vprintk(const char *fmt, va_list ap)
-{
-	return 0;
-}
-static inline void ftrace_dump(enum ftrace_dump_mode oops_dump_mode) { }
-#endif /* CONFIG_TRACING */
-
-/*
- * min()/max()/clamp() macros that also do
- * strict type-checking.. See the
- * "unnecessary" pointer comparison.
- */
-#define min(x, y) ({				\
-	typeof(x) _min1 = (x);			\
-	typeof(y) _min2 = (y);			\
-	(void) (&_min1 == &_min2);		\
-	_min1 < _min2 ? _min1 : _min2; })
-
-#define max(x, y) ({				\
-	typeof(x) _max1 = (x);			\
-	typeof(y) _max2 = (y);			\
-	(void) (&_max1 == &_max2);		\
-	_max1 > _max2 ? _max1 : _max2; })
-
-#define min3(x, y, z) ({			\
-	typeof(x) _min1 = (x);			\
-	typeof(y) _min2 = (y);			\
-	typeof(z) _min3 = (z);			\
-	(void) (&_min1 == &_min2);		\
-	(void) (&_min1 == &_min3);		\
-	_min1 < _min2 ? (_min1 < _min3 ? _min1 : _min3) : \
-		(_min2 < _min3 ? _min2 : _min3); })
-
-#define max3(x, y, z) ({			\
-	typeof(x) _max1 = (x);			\
-	typeof(y) _max2 = (y);			\
-	typeof(z) _max3 = (z);			\
-	(void) (&_max1 == &_max2);		\
-	(void) (&_max1 == &_max3);		\
-	_max1 > _max2 ? (_max1 > _max3 ? _max1 : _max3) : \
-		(_max2 > _max3 ? _max2 : _max3); })
-
-/**
- * min_not_zero - return the minimum that is _not_ zero, unless both are zero
- * @x: value1
- * @y: value2
- */
-#define min_not_zero(x, y) ({			\
-	typeof(x) __x = (x);			\
-	typeof(y) __y = (y);			\
-	__x == 0 ? __y : ((__y == 0) ? __x : min(__x, __y)); })
-
-/**
- * clamp - return a value clamped to a given range with strict typechecking
- * @val: current value
- * @min: minimum allowable value
- * @max: maximum allowable value
- *
- * This macro does strict typechecking of min/max to make sure they are of the
- * same type as val.  See the unnecessary pointer comparisons.
- */
-#define clamp(val, min, max) ({			\
-	typeof(val) __val = (val);		\
-	typeof(min) __min = (min);		\
-	typeof(max) __max = (max);		\
-	(void) (&__val == &__min);		\
-	(void) (&__val == &__max);		\
-	__val = __val < __min ? __min: __val;	\
-	__val > __max ? __max: __val; })
-
-/*
- * ..and if you can't take the strict
- * types, you can specify one yourself.
- *
- * Or not use min/max/clamp at all, of course.
- */
-#define min_t(type, x, y) ({			\
-	type __min1 = (x);			\
-	type __min2 = (y);			\
-	__min1 < __min2 ? __min1: __min2; })
-
-#define max_t(type, x, y) ({			\
-	type __max1 = (x);			\
-	type __max2 = (y);			\
-	__max1 > __max2 ? __max1: __max2; })
-
-/**
- * clamp_t - return a value clamped to a given range using a given type
- * @type: the type of variable to use
- * @val: current value
- * @min: minimum allowable value
- * @max: maximum allowable value
- *
- * This macro does no typechecking and uses temporary variables of type
- * 'type' to make all the comparisons.
- */
-#define clamp_t(type, val, min, max) ({		\
-	type __val = (val);			\
-	type __min = (min);			\
-	type __max = (max);			\
-	__val = __val < __min ? __min: __val;	\
-	__val > __max ? __max: __val; })
-
-/**
- * clamp_val - return a value clamped to a given range using val's type
- * @val: current value
- * @min: minimum allowable value
- * @max: maximum allowable value
- *
- * This macro does no typechecking and uses temporary variables of whatever
- * type the input argument 'val' is.  This is useful when val is an unsigned
- * type and min and max are literals that will otherwise be assigned a signed
- * integer type.
- */
-#define clamp_val(val, min, max) ({		\
-	typeof(val) __val = (val);		\
-	typeof(val) __min = (min);		\
-	typeof(val) __max = (max);		\
-	__val = __val < __min ? __min: __val;	\
-	__val > __max ? __max: __val; })
-
-
-/*
- * swap - swap value of @a and @b
- */
-#define swap(a, b) \
-	do { typeof(a) __tmp = (a); (a) = (b); (b) = __tmp; } while (0)
-
-/**
- * container_of - cast a member of a structure out to the containing structure
- * @ptr:	the pointer to the member.
- * @type:	the type of the container struct this is embedded in.
- * @member:	the name of the member within the struct.
- *
- */
-#define container_of(ptr, type, member) ({			\
-	const typeof( ((type *)0)->member ) *__mptr = (ptr);	\
-	(type *)( (char *)__mptr - offsetof(type,member) );})
-
-/* Trap pasters of __FUNCTION__ at compile-time */
-#define __FUNCTION__ (__func__)
-
-/* This helps us to avoid #ifdef CONFIG_NUMA */
-#ifdef CONFIG_NUMA
-#define NUMA_BUILD 1
-#else
-#define NUMA_BUILD 0
-#endif
-
-/* This helps us avoid #ifdef CONFIG_COMPACTION */
-#ifdef CONFIG_COMPACTION
-#define COMPACTION_BUILD 1
-#else
-#define COMPACTION_BUILD 0
-#endif
-
-/* Rebuild everything on CONFIG_FTRACE_MCOUNT_RECORD */
-#ifdef CONFIG_FTRACE_MCOUNT_RECORD
-# define REBUILD_DUE_TO_FTRACE_MCOUNT_RECORD
-#endif
-
-extern int do_sysinfo(struct sysinfo *info);
-
-/* To identify board information in panic logs, set this */
-extern char *mach_panic_string;
-
-#endif /* __KERNEL__ */
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/kernel_stat.h b/ANDROID_3.4.5/include/linux/kernel_stat.h
deleted file mode 100644
index 2fbd9053..00000000
--- a/ANDROID_3.4.5/include/linux/kernel_stat.h
+++ /dev/null
@@ -1,133 +0,0 @@
-#ifndef _LINUX_KERNEL_STAT_H
-#define _LINUX_KERNEL_STAT_H
-
-#include <linux/smp.h>
-#include <linux/threads.h>
-#include <linux/percpu.h>
-#include <linux/cpumask.h>
-#include <linux/interrupt.h>
-#include <linux/sched.h>
-#include <asm/irq.h>
-#include <asm/cputime.h>
-
-/*
- * 'kernel_stat.h' contains the definitions needed for doing
- * some kernel statistics (CPU usage, context switches ...),
- * used by rstatd/perfmeter
- */
-
-enum cpu_usage_stat {
-	CPUTIME_USER,
-	CPUTIME_NICE,
-	CPUTIME_SYSTEM,
-	CPUTIME_SOFTIRQ,
-	CPUTIME_IRQ,
-	CPUTIME_IDLE,
-	CPUTIME_IOWAIT,
-	CPUTIME_STEAL,
-	CPUTIME_GUEST,
-	CPUTIME_GUEST_NICE,
-	NR_STATS,
-};
-
-struct kernel_cpustat {
-	u64 cpustat[NR_STATS];
-};
-
-struct kernel_stat {
-#ifndef CONFIG_GENERIC_HARDIRQS
-       unsigned int irqs[NR_IRQS];
-#endif
-	unsigned long irqs_sum;
-	unsigned int softirqs[NR_SOFTIRQS];
-};
-
-DECLARE_PER_CPU(struct kernel_stat, kstat);
-DECLARE_PER_CPU(struct kernel_cpustat, kernel_cpustat);
-
-/* Must have preemption disabled for this to be meaningful. */
-#define kstat_this_cpu (&__get_cpu_var(kstat))
-#define kcpustat_this_cpu (&__get_cpu_var(kernel_cpustat))
-#define kstat_cpu(cpu) per_cpu(kstat, cpu)
-#define kcpustat_cpu(cpu) per_cpu(kernel_cpustat, cpu)
-
-extern unsigned long long nr_context_switches(void);
-
-#ifndef CONFIG_GENERIC_HARDIRQS
-
-struct irq_desc;
-
-static inline void kstat_incr_irqs_this_cpu(unsigned int irq,
-					    struct irq_desc *desc)
-{
-	__this_cpu_inc(kstat.irqs[irq]);
-	__this_cpu_inc(kstat.irqs_sum);
-}
-
-static inline unsigned int kstat_irqs_cpu(unsigned int irq, int cpu)
-{
-       return kstat_cpu(cpu).irqs[irq];
-}
-#else
-#include <linux/irq.h>
-extern unsigned int kstat_irqs_cpu(unsigned int irq, int cpu);
-
-#define kstat_incr_irqs_this_cpu(irqno, DESC)		\
-do {							\
-	__this_cpu_inc(*(DESC)->kstat_irqs);		\
-	__this_cpu_inc(kstat.irqs_sum);			\
-} while (0)
-
-#endif
-
-static inline void kstat_incr_softirqs_this_cpu(unsigned int irq)
-{
-	__this_cpu_inc(kstat.softirqs[irq]);
-}
-
-static inline unsigned int kstat_softirqs_cpu(unsigned int irq, int cpu)
-{
-       return kstat_cpu(cpu).softirqs[irq];
-}
-
-/*
- * Number of interrupts per specific IRQ source, since bootup
- */
-#ifndef CONFIG_GENERIC_HARDIRQS
-static inline unsigned int kstat_irqs(unsigned int irq)
-{
-	unsigned int sum = 0;
-	int cpu;
-
-	for_each_possible_cpu(cpu)
-		sum += kstat_irqs_cpu(irq, cpu);
-
-	return sum;
-}
-#else
-extern unsigned int kstat_irqs(unsigned int irq);
-#endif
-
-/*
- * Number of interrupts per cpu, since bootup
- */
-static inline unsigned int kstat_cpu_irqs_sum(unsigned int cpu)
-{
-	return kstat_cpu(cpu).irqs_sum;
-}
-
-/*
- * Lock/unlock the current runqueue - to extract task statistics:
- */
-extern unsigned long long task_delta_exec(struct task_struct *);
-
-extern void account_user_time(struct task_struct *, cputime_t, cputime_t);
-extern void account_system_time(struct task_struct *, int, cputime_t, cputime_t);
-extern void account_steal_time(cputime_t);
-extern void account_idle_time(cputime_t);
-
-extern void account_process_tick(struct task_struct *, int user);
-extern void account_steal_ticks(unsigned long ticks);
-extern void account_idle_ticks(unsigned long ticks);
-
-#endif /* _LINUX_KERNEL_STAT_H */
diff --git a/ANDROID_3.4.5/include/linux/kernelcapi.h b/ANDROID_3.4.5/include/linux/kernelcapi.h
deleted file mode 100644
index 9c268392..00000000
--- a/ANDROID_3.4.5/include/linux/kernelcapi.h
+++ /dev/null
@@ -1,155 +0,0 @@
-/*
- * $Id: kernelcapi.h,v 1.8.6.2 2001/02/07 11:31:31 kai Exp $
- * 
- * Kernel CAPI 2.0 Interface for Linux
- * 
- * (c) Copyright 1997 by Carsten Paeth (calle@calle.in-berlin.de)
- * 
- */
-
-#ifndef __KERNELCAPI_H__
-#define __KERNELCAPI_H__
-
-#define CAPI_MAXAPPL	240	/* maximum number of applications  */
-#define CAPI_MAXCONTR	32	/* maximum number of controller    */
-#define CAPI_MAXDATAWINDOW	8
-
-
-typedef struct kcapi_flagdef {
-	int contr;
-	int flag;
-} kcapi_flagdef;
-
-typedef struct kcapi_carddef {
-	char		driver[32];
-	unsigned int	port;
-	unsigned	irq;
-	unsigned int	membase;
-	int		cardnr;
-} kcapi_carddef;
-
-/* new ioctls >= 10 */
-#define KCAPI_CMD_TRACE		10
-#define KCAPI_CMD_ADDCARD	11	/* OBSOLETE */
-
-/* 
- * flag > 2 => trace also data
- * flag & 1 => show trace
- */
-#define KCAPI_TRACE_OFF			0
-#define KCAPI_TRACE_SHORT_NO_DATA	1
-#define KCAPI_TRACE_FULL_NO_DATA	2
-#define KCAPI_TRACE_SHORT		3
-#define KCAPI_TRACE_FULL		4
-
-
-#ifdef __KERNEL__
-
-#include <linux/list.h>
-#include <linux/skbuff.h>
-#include <linux/workqueue.h>
-#include <linux/notifier.h>
-
-struct capi20_appl {
-	u16 applid;
-	capi_register_params rparam;
-	void (*recv_message)(struct capi20_appl *ap, struct sk_buff *skb);
-	void *private;
-
-	/* internal to kernelcapi.o */
-	unsigned long nrecvctlpkt;
-	unsigned long nrecvdatapkt;
-	unsigned long nsentctlpkt;
-	unsigned long nsentdatapkt;
-	struct mutex recv_mtx;
-	struct sk_buff_head recv_queue;
-	struct work_struct recv_work;
-	int release_in_progress;
-};
-
-u16 capi20_isinstalled(void);
-u16 capi20_register(struct capi20_appl *ap);
-u16 capi20_release(struct capi20_appl *ap);
-u16 capi20_put_message(struct capi20_appl *ap, struct sk_buff *skb);
-u16 capi20_get_manufacturer(u32 contr, u8 buf[CAPI_MANUFACTURER_LEN]);
-u16 capi20_get_version(u32 contr, struct capi_version *verp);
-u16 capi20_get_serial(u32 contr, u8 serial[CAPI_SERIAL_LEN]);
-u16 capi20_get_profile(u32 contr, struct capi_profile *profp);
-int capi20_manufacturer(unsigned int cmd, void __user *data);
-
-#define CAPICTR_UP			0
-#define CAPICTR_DOWN			1
-
-int register_capictr_notifier(struct notifier_block *nb);
-int unregister_capictr_notifier(struct notifier_block *nb);
-
-#define CAPI_NOERROR                      0x0000
-
-#define CAPI_TOOMANYAPPLS		  0x1001
-#define CAPI_LOGBLKSIZETOSMALL	          0x1002
-#define CAPI_BUFFEXECEEDS64K 	          0x1003
-#define CAPI_MSGBUFSIZETOOSMALL	          0x1004
-#define CAPI_ANZLOGCONNNOTSUPPORTED	  0x1005
-#define CAPI_REGRESERVED		  0x1006
-#define CAPI_REGBUSY 		          0x1007
-#define CAPI_REGOSRESOURCEERR	          0x1008
-#define CAPI_REGNOTINSTALLED 	          0x1009
-#define CAPI_REGCTRLERNOTSUPPORTEXTEQUIP  0x100a
-#define CAPI_REGCTRLERONLYSUPPORTEXTEQUIP 0x100b
-
-#define CAPI_ILLAPPNR		          0x1101
-#define CAPI_ILLCMDORSUBCMDORMSGTOSMALL   0x1102
-#define CAPI_SENDQUEUEFULL		  0x1103
-#define CAPI_RECEIVEQUEUEEMPTY	          0x1104
-#define CAPI_RECEIVEOVERFLOW 	          0x1105
-#define CAPI_UNKNOWNNOTPAR		  0x1106
-#define CAPI_MSGBUSY 		          0x1107
-#define CAPI_MSGOSRESOURCEERR	          0x1108
-#define CAPI_MSGNOTINSTALLED 	          0x1109
-#define CAPI_MSGCTRLERNOTSUPPORTEXTEQUIP  0x110a
-#define CAPI_MSGCTRLERONLYSUPPORTEXTEQUIP 0x110b
-
-typedef enum {
-        CapiMessageNotSupportedInCurrentState = 0x2001,
-        CapiIllContrPlciNcci                  = 0x2002,
-        CapiNoPlciAvailable                   = 0x2003,
-        CapiNoNcciAvailable                   = 0x2004,
-        CapiNoListenResourcesAvailable        = 0x2005,
-        CapiNoFaxResourcesAvailable           = 0x2006,
-        CapiIllMessageParmCoding              = 0x2007,
-} RESOURCE_CODING_PROBLEM;
-
-typedef enum {
-        CapiB1ProtocolNotSupported                      = 0x3001,
-        CapiB2ProtocolNotSupported                      = 0x3002,
-        CapiB3ProtocolNotSupported                      = 0x3003,
-        CapiB1ProtocolParameterNotSupported             = 0x3004,
-        CapiB2ProtocolParameterNotSupported             = 0x3005,
-        CapiB3ProtocolParameterNotSupported             = 0x3006,
-        CapiBProtocolCombinationNotSupported            = 0x3007,
-        CapiNcpiNotSupported                            = 0x3008,
-        CapiCipValueUnknown                             = 0x3009,
-        CapiFlagsNotSupported                           = 0x300a,
-        CapiFacilityNotSupported                        = 0x300b,
-        CapiDataLengthNotSupportedByCurrentProtocol     = 0x300c,
-        CapiResetProcedureNotSupportedByCurrentProtocol = 0x300d,
-        CapiTeiAssignmentFailed                         = 0x300e,
-} REQUESTED_SERVICES_PROBLEM;
-
-typedef enum {
-	CapiSuccess                                     = 0x0000,
-	CapiSupplementaryServiceNotSupported            = 0x300e,
-	CapiRequestNotAllowedInThisState                = 0x3010,
-} SUPPLEMENTARY_SERVICE_INFO;
-
-typedef enum {
-	CapiProtocolErrorLayer1                         = 0x3301,
-	CapiProtocolErrorLayer2                         = 0x3302,
-	CapiProtocolErrorLayer3                         = 0x3303,
-	CapiTimeOut                                     = 0x3303, // SuppServiceReason
-	CapiCallGivenToOtherApplication                 = 0x3304,
-} CAPI_REASON;
-
-#endif				/* __KERNEL__ */
-
-#endif				/* __KERNELCAPI_H__ */
diff --git a/ANDROID_3.4.5/include/linux/kexec.h b/ANDROID_3.4.5/include/linux/kexec.h
deleted file mode 100644
index 0d7d6a1b..00000000
--- a/ANDROID_3.4.5/include/linux/kexec.h
+++ /dev/null
@@ -1,231 +0,0 @@
-#ifndef LINUX_KEXEC_H
-#define LINUX_KEXEC_H
-
-#ifdef CONFIG_KEXEC
-#include <linux/types.h>
-#include <linux/list.h>
-#include <linux/linkage.h>
-#include <linux/compat.h>
-#include <linux/ioport.h>
-#include <linux/elfcore.h>
-#include <linux/elf.h>
-#include <asm/kexec.h>
-
-/* Verify architecture specific macros are defined */
-
-#ifndef KEXEC_SOURCE_MEMORY_LIMIT
-#error KEXEC_SOURCE_MEMORY_LIMIT not defined
-#endif
-
-#ifndef KEXEC_DESTINATION_MEMORY_LIMIT
-#error KEXEC_DESTINATION_MEMORY_LIMIT not defined
-#endif
-
-#ifndef KEXEC_CONTROL_MEMORY_LIMIT
-#error KEXEC_CONTROL_MEMORY_LIMIT not defined
-#endif
-
-#ifndef KEXEC_CONTROL_PAGE_SIZE
-#error KEXEC_CONTROL_PAGE_SIZE not defined
-#endif
-
-#ifndef KEXEC_ARCH
-#error KEXEC_ARCH not defined
-#endif
-
-#ifndef KEXEC_CRASH_CONTROL_MEMORY_LIMIT
-#define KEXEC_CRASH_CONTROL_MEMORY_LIMIT KEXEC_CONTROL_MEMORY_LIMIT
-#endif
-
-#ifndef KEXEC_CRASH_MEM_ALIGN
-#define KEXEC_CRASH_MEM_ALIGN PAGE_SIZE
-#endif
-
-#define KEXEC_NOTE_HEAD_BYTES ALIGN(sizeof(struct elf_note), 4)
-#define KEXEC_CORE_NOTE_NAME "CORE"
-#define KEXEC_CORE_NOTE_NAME_BYTES ALIGN(sizeof(KEXEC_CORE_NOTE_NAME), 4)
-#define KEXEC_CORE_NOTE_DESC_BYTES ALIGN(sizeof(struct elf_prstatus), 4)
-/*
- * The per-cpu notes area is a list of notes terminated by a "NULL"
- * note header.  For kdump, the code in vmcore.c runs in the context
- * of the second kernel to combine them into one note.
- */
-#ifndef KEXEC_NOTE_BYTES
-#define KEXEC_NOTE_BYTES ( (KEXEC_NOTE_HEAD_BYTES * 2) +		\
-			    KEXEC_CORE_NOTE_NAME_BYTES +		\
-			    KEXEC_CORE_NOTE_DESC_BYTES )
-#endif
-
-/*
- * This structure is used to hold the arguments that are used when loading
- * kernel binaries.
- */
-
-typedef unsigned long kimage_entry_t;
-#define IND_DESTINATION  0x1
-#define IND_INDIRECTION  0x2
-#define IND_DONE         0x4
-#define IND_SOURCE       0x8
-
-#define KEXEC_SEGMENT_MAX 16
-struct kexec_segment {
-	void __user *buf;
-	size_t bufsz;
-	unsigned long mem;	/* User space sees this as a (void *) ... */
-	size_t memsz;
-};
-
-#ifdef CONFIG_COMPAT
-struct compat_kexec_segment {
-	compat_uptr_t buf;
-	compat_size_t bufsz;
-	compat_ulong_t mem;	/* User space sees this as a (void *) ... */
-	compat_size_t memsz;
-};
-#endif
-
-struct kimage {
-	kimage_entry_t head;
-	kimage_entry_t *entry;
-	kimage_entry_t *last_entry;
-
-	unsigned long destination;
-
-	unsigned long start;
-	struct page *control_code_page;
-	struct page *swap_page;
-
-	unsigned long nr_segments;
-	struct kexec_segment segment[KEXEC_SEGMENT_MAX];
-
-	struct list_head control_pages;
-	struct list_head dest_pages;
-	struct list_head unuseable_pages;
-
-	/* Address of next control page to allocate for crash kernels. */
-	unsigned long control_page;
-
-	/* Flags to indicate special processing */
-	unsigned int type : 1;
-#define KEXEC_TYPE_DEFAULT 0
-#define KEXEC_TYPE_CRASH   1
-	unsigned int preserve_context : 1;
-
-#ifdef ARCH_HAS_KIMAGE_ARCH
-	struct kimage_arch arch;
-#endif
-};
-
-
-
-/* kexec interface functions */
-extern void machine_kexec(struct kimage *image);
-extern int machine_kexec_prepare(struct kimage *image);
-extern void machine_kexec_cleanup(struct kimage *image);
-extern asmlinkage long sys_kexec_load(unsigned long entry,
-					unsigned long nr_segments,
-					struct kexec_segment __user *segments,
-					unsigned long flags);
-extern int kernel_kexec(void);
-#ifdef CONFIG_COMPAT
-extern asmlinkage long compat_sys_kexec_load(unsigned long entry,
-				unsigned long nr_segments,
-				struct compat_kexec_segment __user *segments,
-				unsigned long flags);
-#endif
-extern struct page *kimage_alloc_control_pages(struct kimage *image,
-						unsigned int order);
-extern void crash_kexec(struct pt_regs *);
-int kexec_should_crash(struct task_struct *);
-void crash_save_cpu(struct pt_regs *regs, int cpu);
-void crash_save_vmcoreinfo(void);
-void crash_map_reserved_pages(void);
-void crash_unmap_reserved_pages(void);
-void arch_crash_save_vmcoreinfo(void);
-__printf(1, 2)
-void vmcoreinfo_append_str(const char *fmt, ...);
-unsigned long paddr_vmcoreinfo_note(void);
-
-#define VMCOREINFO_OSRELEASE(value) \
-	vmcoreinfo_append_str("OSRELEASE=%s\n", value)
-#define VMCOREINFO_PAGESIZE(value) \
-	vmcoreinfo_append_str("PAGESIZE=%ld\n", value)
-#define VMCOREINFO_SYMBOL(name) \
-	vmcoreinfo_append_str("SYMBOL(%s)=%lx\n", #name, (unsigned long)&name)
-#define VMCOREINFO_SIZE(name) \
-	vmcoreinfo_append_str("SIZE(%s)=%lu\n", #name, \
-			      (unsigned long)sizeof(name))
-#define VMCOREINFO_STRUCT_SIZE(name) \
-	vmcoreinfo_append_str("SIZE(%s)=%lu\n", #name, \
-			      (unsigned long)sizeof(struct name))
-#define VMCOREINFO_OFFSET(name, field) \
-	vmcoreinfo_append_str("OFFSET(%s.%s)=%lu\n", #name, #field, \
-			      (unsigned long)offsetof(struct name, field))
-#define VMCOREINFO_LENGTH(name, value) \
-	vmcoreinfo_append_str("LENGTH(%s)=%lu\n", #name, (unsigned long)value)
-#define VMCOREINFO_NUMBER(name) \
-	vmcoreinfo_append_str("NUMBER(%s)=%ld\n", #name, (long)name)
-#define VMCOREINFO_CONFIG(name) \
-	vmcoreinfo_append_str("CONFIG_%s=y\n", #name)
-
-extern struct kimage *kexec_image;
-extern struct kimage *kexec_crash_image;
-
-#ifndef kexec_flush_icache_page
-#define kexec_flush_icache_page(page)
-#endif
-
-#define KEXEC_ON_CRASH		0x00000001
-#define KEXEC_PRESERVE_CONTEXT	0x00000002
-#define KEXEC_ARCH_MASK		0xffff0000
-
-/* These values match the ELF architecture values.
- * Unless there is a good reason that should continue to be the case.
- */
-#define KEXEC_ARCH_DEFAULT ( 0 << 16)
-#define KEXEC_ARCH_386     ( 3 << 16)
-#define KEXEC_ARCH_X86_64  (62 << 16)
-#define KEXEC_ARCH_PPC     (20 << 16)
-#define KEXEC_ARCH_PPC64   (21 << 16)
-#define KEXEC_ARCH_IA_64   (50 << 16)
-#define KEXEC_ARCH_ARM     (40 << 16)
-#define KEXEC_ARCH_S390    (22 << 16)
-#define KEXEC_ARCH_SH      (42 << 16)
-#define KEXEC_ARCH_MIPS_LE (10 << 16)
-#define KEXEC_ARCH_MIPS    ( 8 << 16)
-
-/* List of defined/legal kexec flags */
-#ifndef CONFIG_KEXEC_JUMP
-#define KEXEC_FLAGS    KEXEC_ON_CRASH
-#else
-#define KEXEC_FLAGS    (KEXEC_ON_CRASH | KEXEC_PRESERVE_CONTEXT)
-#endif
-
-#define VMCOREINFO_BYTES           (4096)
-#define VMCOREINFO_NOTE_NAME       "VMCOREINFO"
-#define VMCOREINFO_NOTE_NAME_BYTES ALIGN(sizeof(VMCOREINFO_NOTE_NAME), 4)
-#define VMCOREINFO_NOTE_SIZE       (KEXEC_NOTE_HEAD_BYTES*2 + VMCOREINFO_BYTES \
-				    + VMCOREINFO_NOTE_NAME_BYTES)
-
-/* Location of a reserved region to hold the crash kernel.
- */
-extern struct resource crashk_res;
-typedef u32 note_buf_t[KEXEC_NOTE_BYTES/4];
-extern note_buf_t __percpu *crash_notes;
-extern u32 vmcoreinfo_note[VMCOREINFO_NOTE_SIZE/4];
-extern size_t vmcoreinfo_size;
-extern size_t vmcoreinfo_max_size;
-
-int __init parse_crashkernel(char *cmdline, unsigned long long system_ram,
-		unsigned long long *crash_size, unsigned long long *crash_base);
-int crash_shrink_memory(unsigned long new_size);
-size_t crash_get_memory_size(void);
-void crash_free_reserved_phys_range(unsigned long begin, unsigned long end);
-
-#else /* !CONFIG_KEXEC */
-struct pt_regs;
-struct task_struct;
-static inline void crash_kexec(struct pt_regs *regs) { }
-static inline int kexec_should_crash(struct task_struct *p) { return 0; }
-#endif /* CONFIG_KEXEC */
-#endif /* LINUX_KEXEC_H */
diff --git a/ANDROID_3.4.5/include/linux/key-type.h b/ANDROID_3.4.5/include/linux/key-type.h
deleted file mode 100644
index 39e3c082..00000000
--- a/ANDROID_3.4.5/include/linux/key-type.h
+++ /dev/null
@@ -1,125 +0,0 @@
-/* Definitions for key type implementations
- *
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-
-#ifndef _LINUX_KEY_TYPE_H
-#define _LINUX_KEY_TYPE_H
-
-#include <linux/key.h>
-
-#ifdef CONFIG_KEYS
-
-/*
- * key under-construction record
- * - passed to the request_key actor if supplied
- */
-struct key_construction {
-	struct key	*key;	/* key being constructed */
-	struct key	*authkey;/* authorisation for key being constructed */
-};
-
-typedef int (*request_key_actor_t)(struct key_construction *key,
-				   const char *op, void *aux);
-
-/*
- * kernel managed key type definition
- */
-struct key_type {
-	/* name of the type */
-	const char *name;
-
-	/* default payload length for quota precalculation (optional)
-	 * - this can be used instead of calling key_payload_reserve(), that
-	 *   function only needs to be called if the real datalen is different
-	 */
-	size_t def_datalen;
-
-	/* vet a description */
-	int (*vet_description)(const char *description);
-
-	/* instantiate a key of this type
-	 * - this method should call key_payload_reserve() to determine if the
-	 *   user's quota will hold the payload
-	 */
-	int (*instantiate)(struct key *key, const void *data, size_t datalen);
-
-	/* update a key of this type (optional)
-	 * - this method should call key_payload_reserve() to recalculate the
-	 *   quota consumption
-	 * - the key must be locked against read when modifying
-	 */
-	int (*update)(struct key *key, const void *data, size_t datalen);
-
-	/* match a key against a description */
-	int (*match)(const struct key *key, const void *desc);
-
-	/* clear some of the data from a key on revokation (optional)
-	 * - the key's semaphore will be write-locked by the caller
-	 */
-	void (*revoke)(struct key *key);
-
-	/* clear the data from a key (optional) */
-	void (*destroy)(struct key *key);
-
-	/* describe a key */
-	void (*describe)(const struct key *key, struct seq_file *p);
-
-	/* read a key's data (optional)
-	 * - permission checks will be done by the caller
-	 * - the key's semaphore will be readlocked by the caller
-	 * - should return the amount of data that could be read, no matter how
-	 *   much is copied into the buffer
-	 * - shouldn't do the copy if the buffer is NULL
-	 */
-	long (*read)(const struct key *key, char __user *buffer, size_t buflen);
-
-	/* handle request_key() for this type instead of invoking
-	 * /sbin/request-key (optional)
-	 * - key is the key to instantiate
-	 * - authkey is the authority to assume when instantiating this key
-	 * - op is the operation to be done, usually "create"
-	 * - the call must not return until the instantiation process has run
-	 *   its course
-	 */
-	request_key_actor_t request_key;
-
-	/* internal fields */
-	struct list_head	link;		/* link in types list */
-	struct lock_class_key	lock_class;	/* key->sem lock class */
-};
-
-extern struct key_type key_type_keyring;
-
-extern int register_key_type(struct key_type *ktype);
-extern void unregister_key_type(struct key_type *ktype);
-
-extern int key_payload_reserve(struct key *key, size_t datalen);
-extern int key_instantiate_and_link(struct key *key,
-				    const void *data,
-				    size_t datalen,
-				    struct key *keyring,
-				    struct key *instkey);
-extern int key_reject_and_link(struct key *key,
-			       unsigned timeout,
-			       unsigned error,
-			       struct key *keyring,
-			       struct key *instkey);
-extern void complete_request_key(struct key_construction *cons, int error);
-
-static inline int key_negate_and_link(struct key *key,
-				      unsigned timeout,
-				      struct key *keyring,
-				      struct key *instkey)
-{
-	return key_reject_and_link(key, timeout, ENOKEY, keyring, instkey);
-}
-
-#endif /* CONFIG_KEYS */
-#endif /* _LINUX_KEY_TYPE_H */
diff --git a/ANDROID_3.4.5/include/linux/key.h b/ANDROID_3.4.5/include/linux/key.h
deleted file mode 100644
index 96933b1e..00000000
--- a/ANDROID_3.4.5/include/linux/key.h
+++ /dev/null
@@ -1,334 +0,0 @@
-/* Authentication token and access key management
- *
- * Copyright (C) 2004, 2007 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- *
- *
- * See Documentation/security/keys.txt for information on keys/keyrings.
- */
-
-#ifndef _LINUX_KEY_H
-#define _LINUX_KEY_H
-
-#include <linux/types.h>
-#include <linux/list.h>
-#include <linux/rbtree.h>
-#include <linux/rcupdate.h>
-#include <linux/sysctl.h>
-#include <linux/rwsem.h>
-#include <linux/atomic.h>
-
-#ifdef __KERNEL__
-
-/* key handle serial number */
-typedef int32_t key_serial_t;
-
-/* key handle permissions mask */
-typedef uint32_t key_perm_t;
-
-struct key;
-
-#ifdef CONFIG_KEYS
-
-#undef KEY_DEBUGGING
-
-#define KEY_POS_VIEW	0x01000000	/* possessor can view a key's attributes */
-#define KEY_POS_READ	0x02000000	/* possessor can read key payload / view keyring */
-#define KEY_POS_WRITE	0x04000000	/* possessor can update key payload / add link to keyring */
-#define KEY_POS_SEARCH	0x08000000	/* possessor can find a key in search / search a keyring */
-#define KEY_POS_LINK	0x10000000	/* possessor can create a link to a key/keyring */
-#define KEY_POS_SETATTR	0x20000000	/* possessor can set key attributes */
-#define KEY_POS_ALL	0x3f000000
-
-#define KEY_USR_VIEW	0x00010000	/* user permissions... */
-#define KEY_USR_READ	0x00020000
-#define KEY_USR_WRITE	0x00040000
-#define KEY_USR_SEARCH	0x00080000
-#define KEY_USR_LINK	0x00100000
-#define KEY_USR_SETATTR	0x00200000
-#define KEY_USR_ALL	0x003f0000
-
-#define KEY_GRP_VIEW	0x00000100	/* group permissions... */
-#define KEY_GRP_READ	0x00000200
-#define KEY_GRP_WRITE	0x00000400
-#define KEY_GRP_SEARCH	0x00000800
-#define KEY_GRP_LINK	0x00001000
-#define KEY_GRP_SETATTR	0x00002000
-#define KEY_GRP_ALL	0x00003f00
-
-#define KEY_OTH_VIEW	0x00000001	/* third party permissions... */
-#define KEY_OTH_READ	0x00000002
-#define KEY_OTH_WRITE	0x00000004
-#define KEY_OTH_SEARCH	0x00000008
-#define KEY_OTH_LINK	0x00000010
-#define KEY_OTH_SETATTR	0x00000020
-#define KEY_OTH_ALL	0x0000003f
-
-#define KEY_PERM_UNDEF	0xffffffff
-
-struct seq_file;
-struct user_struct;
-struct signal_struct;
-struct cred;
-
-struct key_type;
-struct key_owner;
-struct keyring_list;
-struct keyring_name;
-
-/*****************************************************************************/
-/*
- * key reference with possession attribute handling
- *
- * NOTE! key_ref_t is a typedef'd pointer to a type that is not actually
- * defined. This is because we abuse the bottom bit of the reference to carry a
- * flag to indicate whether the calling process possesses that key in one of
- * its keyrings.
- *
- * the key_ref_t has been made a separate type so that the compiler can reject
- * attempts to dereference it without proper conversion.
- *
- * the three functions are used to assemble and disassemble references
- */
-typedef struct __key_reference_with_attributes *key_ref_t;
-
-static inline key_ref_t make_key_ref(const struct key *key,
-				     unsigned long possession)
-{
-	return (key_ref_t) ((unsigned long) key | possession);
-}
-
-static inline struct key *key_ref_to_ptr(const key_ref_t key_ref)
-{
-	return (struct key *) ((unsigned long) key_ref & ~1UL);
-}
-
-static inline unsigned long is_key_possessed(const key_ref_t key_ref)
-{
-	return (unsigned long) key_ref & 1UL;
-}
-
-/*****************************************************************************/
-/*
- * authentication token / access credential / keyring
- * - types of key include:
- *   - keyrings
- *   - disk encryption IDs
- *   - Kerberos TGTs and tickets
- */
-struct key {
-	atomic_t		usage;		/* number of references */
-	key_serial_t		serial;		/* key serial number */
-	struct rb_node		serial_node;
-	struct key_type		*type;		/* type of key */
-	struct rw_semaphore	sem;		/* change vs change sem */
-	struct key_user		*user;		/* owner of this key */
-	void			*security;	/* security data for this key */
-	union {
-		time_t		expiry;		/* time at which key expires (or 0) */
-		time_t		revoked_at;	/* time at which key was revoked */
-	};
-	uid_t			uid;
-	gid_t			gid;
-	key_perm_t		perm;		/* access permissions */
-	unsigned short		quotalen;	/* length added to quota */
-	unsigned short		datalen;	/* payload data length
-						 * - may not match RCU dereferenced payload
-						 * - payload should contain own length
-						 */
-
-#ifdef KEY_DEBUGGING
-	unsigned		magic;
-#define KEY_DEBUG_MAGIC		0x18273645u
-#define KEY_DEBUG_MAGIC_X	0xf8e9dacbu
-#endif
-
-	unsigned long		flags;		/* status flags (change with bitops) */
-#define KEY_FLAG_INSTANTIATED	0	/* set if key has been instantiated */
-#define KEY_FLAG_DEAD		1	/* set if key type has been deleted */
-#define KEY_FLAG_REVOKED	2	/* set if key had been revoked */
-#define KEY_FLAG_IN_QUOTA	3	/* set if key consumes quota */
-#define KEY_FLAG_USER_CONSTRUCT	4	/* set if key is being constructed in userspace */
-#define KEY_FLAG_NEGATIVE	5	/* set if key is negative */
-#define KEY_FLAG_ROOT_CAN_CLEAR	6	/* set if key can be cleared by root without permission */
-
-	/* the description string
-	 * - this is used to match a key against search criteria
-	 * - this should be a printable string
-	 * - eg: for krb5 AFS, this might be "afs@REDHAT.COM"
-	 */
-	char			*description;
-
-	/* type specific data
-	 * - this is used by the keyring type to index the name
-	 */
-	union {
-		struct list_head	link;
-		unsigned long		x[2];
-		void			*p[2];
-		int			reject_error;
-	} type_data;
-
-	/* key data
-	 * - this is used to hold the data actually used in cryptography or
-	 *   whatever
-	 */
-	union {
-		unsigned long		value;
-		void __rcu		*rcudata;
-		void			*data;
-		struct keyring_list __rcu *subscriptions;
-	} payload;
-};
-
-extern struct key *key_alloc(struct key_type *type,
-			     const char *desc,
-			     uid_t uid, gid_t gid,
-			     const struct cred *cred,
-			     key_perm_t perm,
-			     unsigned long flags);
-
-
-#define KEY_ALLOC_IN_QUOTA	0x0000	/* add to quota, reject if would overrun */
-#define KEY_ALLOC_QUOTA_OVERRUN	0x0001	/* add to quota, permit even if overrun */
-#define KEY_ALLOC_NOT_IN_QUOTA	0x0002	/* not in quota */
-
-extern void key_revoke(struct key *key);
-extern void key_put(struct key *key);
-
-static inline struct key *key_get(struct key *key)
-{
-	if (key)
-		atomic_inc(&key->usage);
-	return key;
-}
-
-static inline void key_ref_put(key_ref_t key_ref)
-{
-	key_put(key_ref_to_ptr(key_ref));
-}
-
-extern struct key *request_key(struct key_type *type,
-			       const char *description,
-			       const char *callout_info);
-
-extern struct key *request_key_with_auxdata(struct key_type *type,
-					    const char *description,
-					    const void *callout_info,
-					    size_t callout_len,
-					    void *aux);
-
-extern struct key *request_key_async(struct key_type *type,
-				     const char *description,
-				     const void *callout_info,
-				     size_t callout_len);
-
-extern struct key *request_key_async_with_auxdata(struct key_type *type,
-						  const char *description,
-						  const void *callout_info,
-						  size_t callout_len,
-						  void *aux);
-
-extern int wait_for_key_construction(struct key *key, bool intr);
-
-extern int key_validate(struct key *key);
-
-extern key_ref_t key_create_or_update(key_ref_t keyring,
-				      const char *type,
-				      const char *description,
-				      const void *payload,
-				      size_t plen,
-				      key_perm_t perm,
-				      unsigned long flags);
-
-extern int key_update(key_ref_t key,
-		      const void *payload,
-		      size_t plen);
-
-extern int key_link(struct key *keyring,
-		    struct key *key);
-
-extern int key_unlink(struct key *keyring,
-		      struct key *key);
-
-extern struct key *keyring_alloc(const char *description, uid_t uid, gid_t gid,
-				 const struct cred *cred,
-				 unsigned long flags,
-				 struct key *dest);
-
-extern int keyring_clear(struct key *keyring);
-
-extern key_ref_t keyring_search(key_ref_t keyring,
-				struct key_type *type,
-				const char *description);
-
-extern int keyring_add_key(struct key *keyring,
-			   struct key *key);
-
-extern struct key *key_lookup(key_serial_t id);
-
-static inline key_serial_t key_serial(const struct key *key)
-{
-	return key ? key->serial : 0;
-}
-
-extern void key_set_timeout(struct key *, unsigned);
-
-/**
- * key_is_instantiated - Determine if a key has been positively instantiated
- * @key: The key to check.
- *
- * Return true if the specified key has been positively instantiated, false
- * otherwise.
- */
-static inline bool key_is_instantiated(const struct key *key)
-{
-	return test_bit(KEY_FLAG_INSTANTIATED, &key->flags) &&
-		!test_bit(KEY_FLAG_NEGATIVE, &key->flags);
-}
-
-#define rcu_dereference_key(KEY)					\
-	(rcu_dereference_protected((KEY)->payload.rcudata,		\
-				   rwsem_is_locked(&((struct key *)(KEY))->sem)))
-
-#define rcu_assign_keypointer(KEY, PAYLOAD)				\
-	(rcu_assign_pointer((KEY)->payload.rcudata, PAYLOAD))
-
-#ifdef CONFIG_SYSCTL
-extern ctl_table key_sysctls[];
-#endif
-
-extern void key_replace_session_keyring(void);
-
-/*
- * the userspace interface
- */
-extern int install_thread_keyring_to_cred(struct cred *cred);
-extern void key_fsuid_changed(struct task_struct *tsk);
-extern void key_fsgid_changed(struct task_struct *tsk);
-extern void key_init(void);
-
-#else /* CONFIG_KEYS */
-
-#define key_validate(k)			0
-#define key_serial(k)			0
-#define key_get(k) 			({ NULL; })
-#define key_revoke(k)			do { } while(0)
-#define key_put(k)			do { } while(0)
-#define key_ref_put(k)			do { } while(0)
-#define make_key_ref(k, p)		NULL
-#define key_ref_to_ptr(k)		NULL
-#define is_key_possessed(k)		0
-#define key_fsuid_changed(t)		do { } while(0)
-#define key_fsgid_changed(t)		do { } while(0)
-#define key_init()			do { } while(0)
-#define key_replace_session_keyring()	do { } while(0)
-
-#endif /* CONFIG_KEYS */
-#endif /* __KERNEL__ */
-#endif /* _LINUX_KEY_H */
diff --git a/ANDROID_3.4.5/include/linux/keyboard.h b/ANDROID_3.4.5/include/linux/keyboard.h
deleted file mode 100644
index 86e5214a..00000000
--- a/ANDROID_3.4.5/include/linux/keyboard.h
+++ /dev/null
@@ -1,459 +0,0 @@
-#ifndef __LINUX_KEYBOARD_H
-#define __LINUX_KEYBOARD_H
-
-#include <linux/wait.h>
-
-#define KG_SHIFT	0
-#define KG_CTRL		2
-#define KG_ALT		3
-#define KG_ALTGR	1
-#define KG_SHIFTL	4
-#define KG_KANASHIFT	4
-#define KG_SHIFTR	5
-#define KG_CTRLL	6
-#define KG_CTRLR	7
-#define KG_CAPSSHIFT	8
-
-#define NR_SHIFT	9
-
-#define NR_KEYS		256
-#define MAX_NR_KEYMAPS	256
-/* This means 128Kb if all keymaps are allocated. Only the superuser
-	may increase the number of keymaps beyond MAX_NR_OF_USER_KEYMAPS. */
-#define MAX_NR_OF_USER_KEYMAPS 256 	/* should be at least 7 */
-
-#ifdef __KERNEL__
-struct notifier_block;
-extern unsigned short *key_maps[MAX_NR_KEYMAPS];
-extern unsigned short plain_map[NR_KEYS];
-
-struct keyboard_notifier_param {
-	struct vc_data *vc;	/* VC on which the keyboard press was done */
-	int down;		/* Pressure of the key? */
-	int shift;		/* Current shift mask */
-	int ledstate;		/* Current led state */
-	unsigned int value;	/* keycode, unicode value or keysym */
-};
-
-extern int register_keyboard_notifier(struct notifier_block *nb);
-extern int unregister_keyboard_notifier(struct notifier_block *nb);
-#endif
-
-#define MAX_NR_FUNC	256	/* max nr of strings assigned to keys */
-
-#define KT_LATIN	0	/* we depend on this being zero */
-#define KT_LETTER	11	/* symbol that can be acted upon by CapsLock */
-#define KT_FN		1
-#define KT_SPEC		2
-#define KT_PAD		3
-#define KT_DEAD		4
-#define KT_CONS		5
-#define KT_CUR		6
-#define KT_SHIFT	7
-#define KT_META		8
-#define KT_ASCII	9
-#define KT_LOCK		10
-#define KT_SLOCK	12
-#define KT_DEAD2	13
-#define KT_BRL		14
-
-#define K(t,v)		(((t)<<8)|(v))
-#define KTYP(x)		((x) >> 8)
-#define KVAL(x)		((x) & 0xff)
-
-#define K_F1		K(KT_FN,0)
-#define K_F2		K(KT_FN,1)
-#define K_F3		K(KT_FN,2)
-#define K_F4		K(KT_FN,3)
-#define K_F5		K(KT_FN,4)
-#define K_F6		K(KT_FN,5)
-#define K_F7		K(KT_FN,6)
-#define K_F8		K(KT_FN,7)
-#define K_F9		K(KT_FN,8)
-#define K_F10		K(KT_FN,9)
-#define K_F11		K(KT_FN,10)
-#define K_F12		K(KT_FN,11)
-#define K_F13		K(KT_FN,12)
-#define K_F14		K(KT_FN,13)
-#define K_F15		K(KT_FN,14)
-#define K_F16		K(KT_FN,15)
-#define K_F17		K(KT_FN,16)
-#define K_F18		K(KT_FN,17)
-#define K_F19		K(KT_FN,18)
-#define K_F20		K(KT_FN,19)
-#define K_FIND		K(KT_FN,20)
-#define K_INSERT	K(KT_FN,21)
-#define K_REMOVE	K(KT_FN,22)
-#define K_SELECT	K(KT_FN,23)
-#define K_PGUP		K(KT_FN,24) /* PGUP is a synonym for PRIOR */
-#define K_PGDN		K(KT_FN,25) /* PGDN is a synonym for NEXT */
-#define K_MACRO	 	K(KT_FN,26)
-#define K_HELP		K(KT_FN,27)
-#define K_DO		K(KT_FN,28)
-#define K_PAUSE	 	K(KT_FN,29)
-#define K_F21		K(KT_FN,30)
-#define K_F22		K(KT_FN,31)
-#define K_F23		K(KT_FN,32)
-#define K_F24		K(KT_FN,33)
-#define K_F25		K(KT_FN,34)
-#define K_F26		K(KT_FN,35)
-#define K_F27		K(KT_FN,36)
-#define K_F28		K(KT_FN,37)
-#define K_F29		K(KT_FN,38)
-#define K_F30		K(KT_FN,39)
-#define K_F31		K(KT_FN,40)
-#define K_F32		K(KT_FN,41)
-#define K_F33		K(KT_FN,42)
-#define K_F34		K(KT_FN,43)
-#define K_F35		K(KT_FN,44)
-#define K_F36		K(KT_FN,45)
-#define K_F37		K(KT_FN,46)
-#define K_F38		K(KT_FN,47)
-#define K_F39		K(KT_FN,48)
-#define K_F40		K(KT_FN,49)
-#define K_F41		K(KT_FN,50)
-#define K_F42		K(KT_FN,51)
-#define K_F43		K(KT_FN,52)
-#define K_F44		K(KT_FN,53)
-#define K_F45		K(KT_FN,54)
-#define K_F46		K(KT_FN,55)
-#define K_F47		K(KT_FN,56)
-#define K_F48		K(KT_FN,57)
-#define K_F49		K(KT_FN,58)
-#define K_F50		K(KT_FN,59)
-#define K_F51		K(KT_FN,60)
-#define K_F52		K(KT_FN,61)
-#define K_F53		K(KT_FN,62)
-#define K_F54		K(KT_FN,63)
-#define K_F55		K(KT_FN,64)
-#define K_F56		K(KT_FN,65)
-#define K_F57		K(KT_FN,66)
-#define K_F58		K(KT_FN,67)
-#define K_F59		K(KT_FN,68)
-#define K_F60		K(KT_FN,69)
-#define K_F61		K(KT_FN,70)
-#define K_F62		K(KT_FN,71)
-#define K_F63		K(KT_FN,72)
-#define K_F64		K(KT_FN,73)
-#define K_F65		K(KT_FN,74)
-#define K_F66		K(KT_FN,75)
-#define K_F67		K(KT_FN,76)
-#define K_F68		K(KT_FN,77)
-#define K_F69		K(KT_FN,78)
-#define K_F70		K(KT_FN,79)
-#define K_F71		K(KT_FN,80)
-#define K_F72		K(KT_FN,81)
-#define K_F73		K(KT_FN,82)
-#define K_F74		K(KT_FN,83)
-#define K_F75		K(KT_FN,84)
-#define K_F76		K(KT_FN,85)
-#define K_F77		K(KT_FN,86)
-#define K_F78		K(KT_FN,87)
-#define K_F79		K(KT_FN,88)
-#define K_F80		K(KT_FN,89)
-#define K_F81		K(KT_FN,90)
-#define K_F82		K(KT_FN,91)
-#define K_F83		K(KT_FN,92)
-#define K_F84		K(KT_FN,93)
-#define K_F85		K(KT_FN,94)
-#define K_F86		K(KT_FN,95)
-#define K_F87		K(KT_FN,96)
-#define K_F88		K(KT_FN,97)
-#define K_F89		K(KT_FN,98)
-#define K_F90		K(KT_FN,99)
-#define K_F91		K(KT_FN,100)
-#define K_F92		K(KT_FN,101)
-#define K_F93		K(KT_FN,102)
-#define K_F94		K(KT_FN,103)
-#define K_F95		K(KT_FN,104)
-#define K_F96		K(KT_FN,105)
-#define K_F97		K(KT_FN,106)
-#define K_F98		K(KT_FN,107)
-#define K_F99		K(KT_FN,108)
-#define K_F100		K(KT_FN,109)
-#define K_F101		K(KT_FN,110)
-#define K_F102		K(KT_FN,111)
-#define K_F103		K(KT_FN,112)
-#define K_F104		K(KT_FN,113)
-#define K_F105		K(KT_FN,114)
-#define K_F106		K(KT_FN,115)
-#define K_F107		K(KT_FN,116)
-#define K_F108		K(KT_FN,117)
-#define K_F109		K(KT_FN,118)
-#define K_F110		K(KT_FN,119)
-#define K_F111		K(KT_FN,120)
-#define K_F112		K(KT_FN,121)
-#define K_F113		K(KT_FN,122)
-#define K_F114		K(KT_FN,123)
-#define K_F115		K(KT_FN,124)
-#define K_F116		K(KT_FN,125)
-#define K_F117		K(KT_FN,126)
-#define K_F118		K(KT_FN,127)
-#define K_F119		K(KT_FN,128)
-#define K_F120		K(KT_FN,129)
-#define K_F121		K(KT_FN,130)
-#define K_F122		K(KT_FN,131)
-#define K_F123		K(KT_FN,132)
-#define K_F124		K(KT_FN,133)
-#define K_F125		K(KT_FN,134)
-#define K_F126		K(KT_FN,135)
-#define K_F127		K(KT_FN,136)
-#define K_F128		K(KT_FN,137)
-#define K_F129		K(KT_FN,138)
-#define K_F130		K(KT_FN,139)
-#define K_F131		K(KT_FN,140)
-#define K_F132		K(KT_FN,141)
-#define K_F133		K(KT_FN,142)
-#define K_F134		K(KT_FN,143)
-#define K_F135		K(KT_FN,144)
-#define K_F136		K(KT_FN,145)
-#define K_F137		K(KT_FN,146)
-#define K_F138		K(KT_FN,147)
-#define K_F139		K(KT_FN,148)
-#define K_F140		K(KT_FN,149)
-#define K_F141		K(KT_FN,150)
-#define K_F142		K(KT_FN,151)
-#define K_F143		K(KT_FN,152)
-#define K_F144		K(KT_FN,153)
-#define K_F145		K(KT_FN,154)
-#define K_F146		K(KT_FN,155)
-#define K_F147		K(KT_FN,156)
-#define K_F148		K(KT_FN,157)
-#define K_F149		K(KT_FN,158)
-#define K_F150		K(KT_FN,159)
-#define K_F151		K(KT_FN,160)
-#define K_F152		K(KT_FN,161)
-#define K_F153		K(KT_FN,162)
-#define K_F154		K(KT_FN,163)
-#define K_F155		K(KT_FN,164)
-#define K_F156		K(KT_FN,165)
-#define K_F157		K(KT_FN,166)
-#define K_F158		K(KT_FN,167)
-#define K_F159		K(KT_FN,168)
-#define K_F160		K(KT_FN,169)
-#define K_F161		K(KT_FN,170)
-#define K_F162		K(KT_FN,171)
-#define K_F163		K(KT_FN,172)
-#define K_F164		K(KT_FN,173)
-#define K_F165		K(KT_FN,174)
-#define K_F166		K(KT_FN,175)
-#define K_F167		K(KT_FN,176)
-#define K_F168		K(KT_FN,177)
-#define K_F169		K(KT_FN,178)
-#define K_F170		K(KT_FN,179)
-#define K_F171		K(KT_FN,180)
-#define K_F172		K(KT_FN,181)
-#define K_F173		K(KT_FN,182)
-#define K_F174		K(KT_FN,183)
-#define K_F175		K(KT_FN,184)
-#define K_F176		K(KT_FN,185)
-#define K_F177		K(KT_FN,186)
-#define K_F178		K(KT_FN,187)
-#define K_F179		K(KT_FN,188)
-#define K_F180		K(KT_FN,189)
-#define K_F181		K(KT_FN,190)
-#define K_F182		K(KT_FN,191)
-#define K_F183		K(KT_FN,192)
-#define K_F184		K(KT_FN,193)
-#define K_F185		K(KT_FN,194)
-#define K_F186		K(KT_FN,195)
-#define K_F187		K(KT_FN,196)
-#define K_F188		K(KT_FN,197)
-#define K_F189		K(KT_FN,198)
-#define K_F190		K(KT_FN,199)
-#define K_F191		K(KT_FN,200)
-#define K_F192		K(KT_FN,201)
-#define K_F193		K(KT_FN,202)
-#define K_F194		K(KT_FN,203)
-#define K_F195		K(KT_FN,204)
-#define K_F196		K(KT_FN,205)
-#define K_F197		K(KT_FN,206)
-#define K_F198		K(KT_FN,207)
-#define K_F199		K(KT_FN,208)
-#define K_F200		K(KT_FN,209)
-#define K_F201		K(KT_FN,210)
-#define K_F202		K(KT_FN,211)
-#define K_F203		K(KT_FN,212)
-#define K_F204		K(KT_FN,213)
-#define K_F205		K(KT_FN,214)
-#define K_F206		K(KT_FN,215)
-#define K_F207		K(KT_FN,216)
-#define K_F208		K(KT_FN,217)
-#define K_F209		K(KT_FN,218)
-#define K_F210		K(KT_FN,219)
-#define K_F211		K(KT_FN,220)
-#define K_F212		K(KT_FN,221)
-#define K_F213		K(KT_FN,222)
-#define K_F214		K(KT_FN,223)
-#define K_F215		K(KT_FN,224)
-#define K_F216		K(KT_FN,225)
-#define K_F217		K(KT_FN,226)
-#define K_F218		K(KT_FN,227)
-#define K_F219		K(KT_FN,228)
-#define K_F220		K(KT_FN,229)
-#define K_F221		K(KT_FN,230)
-#define K_F222		K(KT_FN,231)
-#define K_F223		K(KT_FN,232)
-#define K_F224		K(KT_FN,233)
-#define K_F225		K(KT_FN,234)
-#define K_F226		K(KT_FN,235)
-#define K_F227		K(KT_FN,236)
-#define K_F228		K(KT_FN,237)
-#define K_F229		K(KT_FN,238)
-#define K_F230		K(KT_FN,239)
-#define K_F231		K(KT_FN,240)
-#define K_F232		K(KT_FN,241)
-#define K_F233		K(KT_FN,242)
-#define K_F234		K(KT_FN,243)
-#define K_F235		K(KT_FN,244)
-#define K_F236		K(KT_FN,245)
-#define K_F237		K(KT_FN,246)
-#define K_F238		K(KT_FN,247)
-#define K_F239		K(KT_FN,248)
-#define K_F240		K(KT_FN,249)
-#define K_F241		K(KT_FN,250)
-#define K_F242		K(KT_FN,251)
-#define K_F243		K(KT_FN,252)
-#define K_F244		K(KT_FN,253)
-#define K_F245		K(KT_FN,254)
-#define K_UNDO		K(KT_FN,255)
-
-
-#define K_HOLE		K(KT_SPEC,0)
-#define K_ENTER		K(KT_SPEC,1)
-#define K_SH_REGS	K(KT_SPEC,2)
-#define K_SH_MEM	K(KT_SPEC,3)
-#define K_SH_STAT	K(KT_SPEC,4)
-#define K_BREAK		K(KT_SPEC,5)
-#define K_CONS		K(KT_SPEC,6)
-#define K_CAPS		K(KT_SPEC,7)
-#define K_NUM		K(KT_SPEC,8)
-#define K_HOLD		K(KT_SPEC,9)
-#define K_SCROLLFORW	K(KT_SPEC,10)
-#define K_SCROLLBACK	K(KT_SPEC,11)
-#define K_BOOT		K(KT_SPEC,12)
-#define K_CAPSON	K(KT_SPEC,13)
-#define K_COMPOSE	K(KT_SPEC,14)
-#define K_SAK		K(KT_SPEC,15)
-#define K_DECRCONSOLE	K(KT_SPEC,16)
-#define K_INCRCONSOLE	K(KT_SPEC,17)
-#define K_SPAWNCONSOLE	K(KT_SPEC,18)
-#define K_BARENUMLOCK	K(KT_SPEC,19)
-
-#define K_ALLOCATED	K(KT_SPEC,126) /* dynamically allocated keymap */
-#define K_NOSUCHMAP	K(KT_SPEC,127) /* returned by KDGKBENT */
-
-#define K_P0		K(KT_PAD,0)
-#define K_P1		K(KT_PAD,1)
-#define K_P2		K(KT_PAD,2)
-#define K_P3		K(KT_PAD,3)
-#define K_P4		K(KT_PAD,4)
-#define K_P5		K(KT_PAD,5)
-#define K_P6		K(KT_PAD,6)
-#define K_P7		K(KT_PAD,7)
-#define K_P8		K(KT_PAD,8)
-#define K_P9		K(KT_PAD,9)
-#define K_PPLUS		K(KT_PAD,10)	/* key-pad plus */
-#define K_PMINUS	K(KT_PAD,11)	/* key-pad minus */
-#define K_PSTAR		K(KT_PAD,12)	/* key-pad asterisk (star) */
-#define K_PSLASH	K(KT_PAD,13)	/* key-pad slash */
-#define K_PENTER	K(KT_PAD,14)	/* key-pad enter */
-#define K_PCOMMA	K(KT_PAD,15)	/* key-pad comma: kludge... */
-#define K_PDOT		K(KT_PAD,16)	/* key-pad dot (period): kludge... */
-#define K_PPLUSMINUS	K(KT_PAD,17)	/* key-pad plus/minus */
-#define K_PPARENL	K(KT_PAD,18)	/* key-pad left parenthesis */
-#define K_PPARENR	K(KT_PAD,19)	/* key-pad right parenthesis */
-
-#define NR_PAD		20
-
-#define K_DGRAVE	K(KT_DEAD,0)
-#define K_DACUTE	K(KT_DEAD,1)
-#define K_DCIRCM	K(KT_DEAD,2)
-#define K_DTILDE	K(KT_DEAD,3)
-#define K_DDIERE	K(KT_DEAD,4)
-#define K_DCEDIL	K(KT_DEAD,5)
-
-#define NR_DEAD		6
-
-#define K_DOWN		K(KT_CUR,0)
-#define K_LEFT		K(KT_CUR,1)
-#define K_RIGHT		K(KT_CUR,2)
-#define K_UP		K(KT_CUR,3)
-
-#define K_SHIFT		K(KT_SHIFT,KG_SHIFT)
-#define K_CTRL		K(KT_SHIFT,KG_CTRL)
-#define K_ALT		K(KT_SHIFT,KG_ALT)
-#define K_ALTGR		K(KT_SHIFT,KG_ALTGR)
-#define K_SHIFTL	K(KT_SHIFT,KG_SHIFTL)
-#define K_SHIFTR	K(KT_SHIFT,KG_SHIFTR)
-#define K_CTRLL	 	K(KT_SHIFT,KG_CTRLL)
-#define K_CTRLR	 	K(KT_SHIFT,KG_CTRLR)
-#define K_CAPSSHIFT	K(KT_SHIFT,KG_CAPSSHIFT)
-
-#define K_ASC0		K(KT_ASCII,0)
-#define K_ASC1		K(KT_ASCII,1)
-#define K_ASC2		K(KT_ASCII,2)
-#define K_ASC3		K(KT_ASCII,3)
-#define K_ASC4		K(KT_ASCII,4)
-#define K_ASC5		K(KT_ASCII,5)
-#define K_ASC6		K(KT_ASCII,6)
-#define K_ASC7		K(KT_ASCII,7)
-#define K_ASC8		K(KT_ASCII,8)
-#define K_ASC9		K(KT_ASCII,9)
-#define K_HEX0		K(KT_ASCII,10)
-#define K_HEX1		K(KT_ASCII,11)
-#define K_HEX2		K(KT_ASCII,12)
-#define K_HEX3		K(KT_ASCII,13)
-#define K_HEX4		K(KT_ASCII,14)
-#define K_HEX5		K(KT_ASCII,15)
-#define K_HEX6		K(KT_ASCII,16)
-#define K_HEX7		K(KT_ASCII,17)
-#define K_HEX8		K(KT_ASCII,18)
-#define K_HEX9		K(KT_ASCII,19)
-#define K_HEXa		K(KT_ASCII,20)
-#define K_HEXb		K(KT_ASCII,21)
-#define K_HEXc		K(KT_ASCII,22)
-#define K_HEXd		K(KT_ASCII,23)
-#define K_HEXe		K(KT_ASCII,24)
-#define K_HEXf		K(KT_ASCII,25)
-
-#define NR_ASCII	26
-
-#define K_SHIFTLOCK	K(KT_LOCK,KG_SHIFT)
-#define K_CTRLLOCK	K(KT_LOCK,KG_CTRL)
-#define K_ALTLOCK	K(KT_LOCK,KG_ALT)
-#define K_ALTGRLOCK	K(KT_LOCK,KG_ALTGR)
-#define K_SHIFTLLOCK	K(KT_LOCK,KG_SHIFTL)
-#define K_SHIFTRLOCK	K(KT_LOCK,KG_SHIFTR)
-#define K_CTRLLLOCK	K(KT_LOCK,KG_CTRLL)
-#define K_CTRLRLOCK	K(KT_LOCK,KG_CTRLR)
-#define K_CAPSSHIFTLOCK	K(KT_LOCK,KG_CAPSSHIFT)
-
-#define K_SHIFT_SLOCK	K(KT_SLOCK,KG_SHIFT)
-#define K_CTRL_SLOCK	K(KT_SLOCK,KG_CTRL)
-#define K_ALT_SLOCK	K(KT_SLOCK,KG_ALT)
-#define K_ALTGR_SLOCK	K(KT_SLOCK,KG_ALTGR)
-#define K_SHIFTL_SLOCK	K(KT_SLOCK,KG_SHIFTL)
-#define K_SHIFTR_SLOCK	K(KT_SLOCK,KG_SHIFTR)
-#define K_CTRLL_SLOCK	K(KT_SLOCK,KG_CTRLL)
-#define K_CTRLR_SLOCK	K(KT_SLOCK,KG_CTRLR)
-#define K_CAPSSHIFT_SLOCK	K(KT_SLOCK,KG_CAPSSHIFT)
-
-#define NR_LOCK		9
-
-#define K_BRL_BLANK     K(KT_BRL, 0)
-#define K_BRL_DOT1      K(KT_BRL, 1)
-#define K_BRL_DOT2      K(KT_BRL, 2)
-#define K_BRL_DOT3      K(KT_BRL, 3)
-#define K_BRL_DOT4      K(KT_BRL, 4)
-#define K_BRL_DOT5      K(KT_BRL, 5)
-#define K_BRL_DOT6      K(KT_BRL, 6)
-#define K_BRL_DOT7      K(KT_BRL, 7)
-#define K_BRL_DOT8      K(KT_BRL, 8)
-#define K_BRL_DOT9      K(KT_BRL, 9)
-#define K_BRL_DOT10     K(KT_BRL, 10)
-
-#define NR_BRL		11
-
-#define MAX_DIACR	256
-#endif
diff --git a/ANDROID_3.4.5/include/linux/keychord.h b/ANDROID_3.4.5/include/linux/keychord.h
deleted file mode 100644
index 856a5850..00000000
--- a/ANDROID_3.4.5/include/linux/keychord.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- *  Key chord input driver
- *
- * Copyright (C) 2008 Google, Inc.
- * Author: Mike Lockwood <lockwood@android.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
-*/
-
-#ifndef __LINUX_KEYCHORD_H_
-#define __LINUX_KEYCHORD_H_
-
-#include <linux/input.h>
-
-#define KEYCHORD_VERSION		1
-
-/*
- * One or more input_keychord structs are written to /dev/keychord
- * at once to specify the list of keychords to monitor.
- * Reading /dev/keychord returns the id of a keychord when the
- * keychord combination is pressed.  A keychord is signalled when
- * all of the keys in the keycode list are in the pressed state.
- * The order in which the keys are pressed does not matter.
- * The keychord will not be signalled if keys not in the keycode
- * list are pressed.
- * Keychords will not be signalled on key release events.
- */
-struct input_keychord {
-	/* should be KEYCHORD_VERSION */
-	__u16 version;
-	/*
-	 * client specified ID, returned from read()
-	 * when this keychord is pressed.
-	 */
-	__u16 id;
-
-	/* number of keycodes in this keychord */
-	__u16 count;
-
-	/* variable length array of keycodes */
-	__u16 keycodes[];
-};
-
-#endif	/* __LINUX_KEYCHORD_H_ */
diff --git a/ANDROID_3.4.5/include/linux/keyctl.h b/ANDROID_3.4.5/include/linux/keyctl.h
deleted file mode 100644
index 9b0b865c..00000000
--- a/ANDROID_3.4.5/include/linux/keyctl.h
+++ /dev/null
@@ -1,59 +0,0 @@
-/* keyctl.h: keyctl command IDs
- *
- * Copyright (C) 2004, 2008 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#ifndef _LINUX_KEYCTL_H
-#define _LINUX_KEYCTL_H
-
-/* special process keyring shortcut IDs */
-#define KEY_SPEC_THREAD_KEYRING		-1	/* - key ID for thread-specific keyring */
-#define KEY_SPEC_PROCESS_KEYRING	-2	/* - key ID for process-specific keyring */
-#define KEY_SPEC_SESSION_KEYRING	-3	/* - key ID for session-specific keyring */
-#define KEY_SPEC_USER_KEYRING		-4	/* - key ID for UID-specific keyring */
-#define KEY_SPEC_USER_SESSION_KEYRING	-5	/* - key ID for UID-session keyring */
-#define KEY_SPEC_GROUP_KEYRING		-6	/* - key ID for GID-specific keyring */
-#define KEY_SPEC_REQKEY_AUTH_KEY	-7	/* - key ID for assumed request_key auth key */
-#define KEY_SPEC_REQUESTOR_KEYRING	-8	/* - key ID for request_key() dest keyring */
-
-/* request-key default keyrings */
-#define KEY_REQKEY_DEFL_NO_CHANGE		-1
-#define KEY_REQKEY_DEFL_DEFAULT			0
-#define KEY_REQKEY_DEFL_THREAD_KEYRING		1
-#define KEY_REQKEY_DEFL_PROCESS_KEYRING		2
-#define KEY_REQKEY_DEFL_SESSION_KEYRING		3
-#define KEY_REQKEY_DEFL_USER_KEYRING		4
-#define KEY_REQKEY_DEFL_USER_SESSION_KEYRING	5
-#define KEY_REQKEY_DEFL_GROUP_KEYRING		6
-#define KEY_REQKEY_DEFL_REQUESTOR_KEYRING	7
-
-/* keyctl commands */
-#define KEYCTL_GET_KEYRING_ID		0	/* ask for a keyring's ID */
-#define KEYCTL_JOIN_SESSION_KEYRING	1	/* join or start named session keyring */
-#define KEYCTL_UPDATE			2	/* update a key */
-#define KEYCTL_REVOKE			3	/* revoke a key */
-#define KEYCTL_CHOWN			4	/* set ownership of a key */
-#define KEYCTL_SETPERM			5	/* set perms on a key */
-#define KEYCTL_DESCRIBE			6	/* describe a key */
-#define KEYCTL_CLEAR			7	/* clear contents of a keyring */
-#define KEYCTL_LINK			8	/* link a key into a keyring */
-#define KEYCTL_UNLINK			9	/* unlink a key from a keyring */
-#define KEYCTL_SEARCH			10	/* search for a key in a keyring */
-#define KEYCTL_READ			11	/* read a key or keyring's contents */
-#define KEYCTL_INSTANTIATE		12	/* instantiate a partially constructed key */
-#define KEYCTL_NEGATE			13	/* negate a partially constructed key */
-#define KEYCTL_SET_REQKEY_KEYRING	14	/* set default request-key keyring */
-#define KEYCTL_SET_TIMEOUT		15	/* set key timeout */
-#define KEYCTL_ASSUME_AUTHORITY		16	/* assume request_key() authorisation */
-#define KEYCTL_GET_SECURITY		17	/* get key security label */
-#define KEYCTL_SESSION_TO_PARENT	18	/* apply session keyring to parent process */
-#define KEYCTL_REJECT			19	/* reject a partially constructed key */
-#define KEYCTL_INSTANTIATE_IOV		20	/* instantiate a partially constructed key */
-
-#endif /*  _LINUX_KEYCTL_H */
diff --git a/ANDROID_3.4.5/include/linux/keyreset.h b/ANDROID_3.4.5/include/linux/keyreset.h
deleted file mode 100644
index a2ac49e5..00000000
--- a/ANDROID_3.4.5/include/linux/keyreset.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * include/linux/keyreset.h - platform data structure for resetkeys driver
- *
- * Copyright (C) 2008 Google, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef _LINUX_KEYRESET_H
-#define _LINUX_KEYRESET_H
-
-#define KEYRESET_NAME "keyreset"
-
-struct keyreset_platform_data {
-	int (*reset_fn)(void);
-	int *keys_up;
-	int keys_down[]; /* 0 terminated */
-};
-
-#endif /* _LINUX_KEYRESET_H */
diff --git a/ANDROID_3.4.5/include/linux/kfifo.h b/ANDROID_3.4.5/include/linux/kfifo.h
deleted file mode 100644
index 10308c6a..00000000
--- a/ANDROID_3.4.5/include/linux/kfifo.h
+++ /dev/null
@@ -1,852 +0,0 @@
-/*
- * A generic kernel FIFO implementation
- *
- * Copyright (C) 2009/2010 Stefani Seibold <stefani@seibold.net>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-#ifndef _LINUX_KFIFO_H
-#define _LINUX_KFIFO_H
-
-/*
- * How to porting drivers to the new generic FIFO API:
- *
- * - Modify the declaration of the "struct kfifo *" object into a
- *   in-place "struct kfifo" object
- * - Init the in-place object with kfifo_alloc() or kfifo_init()
- *   Note: The address of the in-place "struct kfifo" object must be
- *   passed as the first argument to this functions
- * - Replace the use of __kfifo_put into kfifo_in and __kfifo_get
- *   into kfifo_out
- * - Replace the use of kfifo_put into kfifo_in_spinlocked and kfifo_get
- *   into kfifo_out_spinlocked
- *   Note: the spinlock pointer formerly passed to kfifo_init/kfifo_alloc
- *   must be passed now to the kfifo_in_spinlocked and kfifo_out_spinlocked
- *   as the last parameter
- * - The formerly __kfifo_* functions are renamed into kfifo_*
- */
-
-/*
- * Note about locking : There is no locking required until only * one reader
- * and one writer is using the fifo and no kfifo_reset() will be * called
- *  kfifo_reset_out() can be safely used, until it will be only called
- * in the reader thread.
- *  For multiple writer and one reader there is only a need to lock the writer.
- * And vice versa for only one writer and multiple reader there is only a need
- * to lock the reader.
- */
-
-#include <linux/kernel.h>
-#include <linux/spinlock.h>
-#include <linux/stddef.h>
-#include <linux/scatterlist.h>
-
-struct __kfifo {
-	unsigned int	in;
-	unsigned int	out;
-	unsigned int	mask;
-	unsigned int	esize;
-	void		*data;
-};
-
-#define __STRUCT_KFIFO_COMMON(datatype, recsize, ptrtype) \
-	union { \
-		struct __kfifo	kfifo; \
-		datatype	*type; \
-		char		(*rectype)[recsize]; \
-		ptrtype		*ptr; \
-		const ptrtype	*ptr_const; \
-	}
-
-#define __STRUCT_KFIFO(type, size, recsize, ptrtype) \
-{ \
-	__STRUCT_KFIFO_COMMON(type, recsize, ptrtype); \
-	type		buf[((size < 2) || (size & (size - 1))) ? -1 : size]; \
-}
-
-#define STRUCT_KFIFO(type, size) \
-	struct __STRUCT_KFIFO(type, size, 0, type)
-
-#define __STRUCT_KFIFO_PTR(type, recsize, ptrtype) \
-{ \
-	__STRUCT_KFIFO_COMMON(type, recsize, ptrtype); \
-	type		buf[0]; \
-}
-
-#define STRUCT_KFIFO_PTR(type) \
-	struct __STRUCT_KFIFO_PTR(type, 0, type)
-
-/*
- * define compatibility "struct kfifo" for dynamic allocated fifos
- */
-struct kfifo __STRUCT_KFIFO_PTR(unsigned char, 0, void);
-
-#define STRUCT_KFIFO_REC_1(size) \
-	struct __STRUCT_KFIFO(unsigned char, size, 1, void)
-
-#define STRUCT_KFIFO_REC_2(size) \
-	struct __STRUCT_KFIFO(unsigned char, size, 2, void)
-
-/*
- * define kfifo_rec types
- */
-struct kfifo_rec_ptr_1 __STRUCT_KFIFO_PTR(unsigned char, 1, void);
-struct kfifo_rec_ptr_2 __STRUCT_KFIFO_PTR(unsigned char, 2, void);
-
-/*
- * helper macro to distinguish between real in place fifo where the fifo
- * array is a part of the structure and the fifo type where the array is
- * outside of the fifo structure.
- */
-#define	__is_kfifo_ptr(fifo)	(sizeof(*fifo) == sizeof(struct __kfifo))
-
-/**
- * DECLARE_KFIFO_PTR - macro to declare a fifo pointer object
- * @fifo: name of the declared fifo
- * @type: type of the fifo elements
- */
-#define DECLARE_KFIFO_PTR(fifo, type)	STRUCT_KFIFO_PTR(type) fifo
-
-/**
- * DECLARE_KFIFO - macro to declare a fifo object
- * @fifo: name of the declared fifo
- * @type: type of the fifo elements
- * @size: the number of elements in the fifo, this must be a power of 2
- */
-#define DECLARE_KFIFO(fifo, type, size)	STRUCT_KFIFO(type, size) fifo
-
-/**
- * INIT_KFIFO - Initialize a fifo declared by DECLARE_KFIFO
- * @fifo: name of the declared fifo datatype
- */
-#define INIT_KFIFO(fifo) \
-(void)({ \
-	typeof(&(fifo)) __tmp = &(fifo); \
-	struct __kfifo *__kfifo = &__tmp->kfifo; \
-	__kfifo->in = 0; \
-	__kfifo->out = 0; \
-	__kfifo->mask = __is_kfifo_ptr(__tmp) ? 0 : ARRAY_SIZE(__tmp->buf) - 1;\
-	__kfifo->esize = sizeof(*__tmp->buf); \
-	__kfifo->data = __is_kfifo_ptr(__tmp) ?  NULL : __tmp->buf; \
-})
-
-/**
- * DEFINE_KFIFO - macro to define and initialize a fifo
- * @fifo: name of the declared fifo datatype
- * @type: type of the fifo elements
- * @size: the number of elements in the fifo, this must be a power of 2
- *
- * Note: the macro can be used for global and local fifo data type variables.
- */
-#define DEFINE_KFIFO(fifo, type, size) \
-	DECLARE_KFIFO(fifo, type, size) = \
-	(typeof(fifo)) { \
-		{ \
-			{ \
-			.in	= 0, \
-			.out	= 0, \
-			.mask	= __is_kfifo_ptr(&(fifo)) ? \
-				  0 : \
-				  ARRAY_SIZE((fifo).buf) - 1, \
-			.esize	= sizeof(*(fifo).buf), \
-			.data	= __is_kfifo_ptr(&(fifo)) ? \
-				NULL : \
-				(fifo).buf, \
-			} \
-		} \
-	}
-
-
-static inline unsigned int __must_check
-__kfifo_uint_must_check_helper(unsigned int val)
-{
-	return val;
-}
-
-static inline int __must_check
-__kfifo_int_must_check_helper(int val)
-{
-	return val;
-}
-
-/**
- * kfifo_initialized - Check if the fifo is initialized
- * @fifo: address of the fifo to check
- *
- * Return %true if fifo is initialized, otherwise %false.
- * Assumes the fifo was 0 before.
- */
-#define kfifo_initialized(fifo) ((fifo)->kfifo.mask)
-
-/**
- * kfifo_esize - returns the size of the element managed by the fifo
- * @fifo: address of the fifo to be used
- */
-#define kfifo_esize(fifo)	((fifo)->kfifo.esize)
-
-/**
- * kfifo_recsize - returns the size of the record length field
- * @fifo: address of the fifo to be used
- */
-#define kfifo_recsize(fifo)	(sizeof(*(fifo)->rectype))
-
-/**
- * kfifo_size - returns the size of the fifo in elements
- * @fifo: address of the fifo to be used
- */
-#define kfifo_size(fifo)	((fifo)->kfifo.mask + 1)
-
-/**
- * kfifo_reset - removes the entire fifo content
- * @fifo: address of the fifo to be used
- *
- * Note: usage of kfifo_reset() is dangerous. It should be only called when the
- * fifo is exclusived locked or when it is secured that no other thread is
- * accessing the fifo.
- */
-#define kfifo_reset(fifo) \
-(void)({ \
-	typeof((fifo) + 1) __tmp = (fifo); \
-	__tmp->kfifo.in = __tmp->kfifo.out = 0; \
-})
-
-/**
- * kfifo_reset_out - skip fifo content
- * @fifo: address of the fifo to be used
- *
- * Note: The usage of kfifo_reset_out() is safe until it will be only called
- * from the reader thread and there is only one concurrent reader. Otherwise
- * it is dangerous and must be handled in the same way as kfifo_reset().
- */
-#define kfifo_reset_out(fifo)	\
-(void)({ \
-	typeof((fifo) + 1) __tmp = (fifo); \
-	__tmp->kfifo.out = __tmp->kfifo.in; \
-})
-
-/**
- * kfifo_len - returns the number of used elements in the fifo
- * @fifo: address of the fifo to be used
- */
-#define kfifo_len(fifo) \
-({ \
-	typeof((fifo) + 1) __tmpl = (fifo); \
-	__tmpl->kfifo.in - __tmpl->kfifo.out; \
-})
-
-/**
- * kfifo_is_empty - returns true if the fifo is empty
- * @fifo: address of the fifo to be used
- */
-#define	kfifo_is_empty(fifo) \
-({ \
-	typeof((fifo) + 1) __tmpq = (fifo); \
-	__tmpq->kfifo.in == __tmpq->kfifo.out; \
-})
-
-/**
- * kfifo_is_full - returns true if the fifo is full
- * @fifo: address of the fifo to be used
- */
-#define	kfifo_is_full(fifo) \
-({ \
-	typeof((fifo) + 1) __tmpq = (fifo); \
-	kfifo_len(__tmpq) > __tmpq->kfifo.mask; \
-})
-
-/**
- * kfifo_avail - returns the number of unused elements in the fifo
- * @fifo: address of the fifo to be used
- */
-#define	kfifo_avail(fifo) \
-__kfifo_uint_must_check_helper( \
-({ \
-	typeof((fifo) + 1) __tmpq = (fifo); \
-	const size_t __recsize = sizeof(*__tmpq->rectype); \
-	unsigned int __avail = kfifo_size(__tmpq) - kfifo_len(__tmpq); \
-	(__recsize) ? ((__avail <= __recsize) ? 0 : \
-	__kfifo_max_r(__avail - __recsize, __recsize)) : \
-	__avail; \
-}) \
-)
-
-/**
- * kfifo_skip - skip output data
- * @fifo: address of the fifo to be used
- */
-#define	kfifo_skip(fifo) \
-(void)({ \
-	typeof((fifo) + 1) __tmp = (fifo); \
-	const size_t __recsize = sizeof(*__tmp->rectype); \
-	struct __kfifo *__kfifo = &__tmp->kfifo; \
-	if (__recsize) \
-		__kfifo_skip_r(__kfifo, __recsize); \
-	else \
-		__kfifo->out++; \
-})
-
-/**
- * kfifo_peek_len - gets the size of the next fifo record
- * @fifo: address of the fifo to be used
- *
- * This function returns the size of the next fifo record in number of bytes.
- */
-#define kfifo_peek_len(fifo) \
-__kfifo_uint_must_check_helper( \
-({ \
-	typeof((fifo) + 1) __tmp = (fifo); \
-	const size_t __recsize = sizeof(*__tmp->rectype); \
-	struct __kfifo *__kfifo = &__tmp->kfifo; \
-	(!__recsize) ? kfifo_len(__tmp) * sizeof(*__tmp->type) : \
-	__kfifo_len_r(__kfifo, __recsize); \
-}) \
-)
-
-/**
- * kfifo_alloc - dynamically allocates a new fifo buffer
- * @fifo: pointer to the fifo
- * @size: the number of elements in the fifo, this must be a power of 2
- * @gfp_mask: get_free_pages mask, passed to kmalloc()
- *
- * This macro dynamically allocates a new fifo buffer.
- *
- * The numer of elements will be rounded-up to a power of 2.
- * The fifo will be release with kfifo_free().
- * Return 0 if no error, otherwise an error code.
- */
-#define kfifo_alloc(fifo, size, gfp_mask) \
-__kfifo_int_must_check_helper( \
-({ \
-	typeof((fifo) + 1) __tmp = (fifo); \
-	struct __kfifo *__kfifo = &__tmp->kfifo; \
-	__is_kfifo_ptr(__tmp) ? \
-	__kfifo_alloc(__kfifo, size, sizeof(*__tmp->type), gfp_mask) : \
-	-EINVAL; \
-}) \
-)
-
-/**
- * kfifo_free - frees the fifo
- * @fifo: the fifo to be freed
- */
-#define kfifo_free(fifo) \
-({ \
-	typeof((fifo) + 1) __tmp = (fifo); \
-	struct __kfifo *__kfifo = &__tmp->kfifo; \
-	if (__is_kfifo_ptr(__tmp)) \
-		__kfifo_free(__kfifo); \
-})
-
-/**
- * kfifo_init - initialize a fifo using a preallocated buffer
- * @fifo: the fifo to assign the buffer
- * @buffer: the preallocated buffer to be used
- * @size: the size of the internal buffer, this have to be a power of 2
- *
- * This macro initialize a fifo using a preallocated buffer.
- *
- * The numer of elements will be rounded-up to a power of 2.
- * Return 0 if no error, otherwise an error code.
- */
-#define kfifo_init(fifo, buffer, size) \
-({ \
-	typeof((fifo) + 1) __tmp = (fifo); \
-	struct __kfifo *__kfifo = &__tmp->kfifo; \
-	__is_kfifo_ptr(__tmp) ? \
-	__kfifo_init(__kfifo, buffer, size, sizeof(*__tmp->type)) : \
-	-EINVAL; \
-})
-
-/**
- * kfifo_put - put data into the fifo
- * @fifo: address of the fifo to be used
- * @val: the data to be added
- *
- * This macro copies the given value into the fifo.
- * It returns 0 if the fifo was full. Otherwise it returns the number
- * processed elements.
- *
- * Note that with only one concurrent reader and one concurrent
- * writer, you don't need extra locking to use these macro.
- */
-#define	kfifo_put(fifo, val) \
-({ \
-	typeof((fifo) + 1) __tmp = (fifo); \
-	typeof((val) + 1) __val = (val); \
-	unsigned int __ret; \
-	const size_t __recsize = sizeof(*__tmp->rectype); \
-	struct __kfifo *__kfifo = &__tmp->kfifo; \
-	if (0) { \
-		typeof(__tmp->ptr_const) __dummy __attribute__ ((unused)); \
-		__dummy = (typeof(__val))NULL; \
-	} \
-	if (__recsize) \
-		__ret = __kfifo_in_r(__kfifo, __val, sizeof(*__val), \
-			__recsize); \
-	else { \
-		__ret = !kfifo_is_full(__tmp); \
-		if (__ret) { \
-			(__is_kfifo_ptr(__tmp) ? \
-			((typeof(__tmp->type))__kfifo->data) : \
-			(__tmp->buf) \
-			)[__kfifo->in & __tmp->kfifo.mask] = \
-				*(typeof(__tmp->type))__val; \
-			smp_wmb(); \
-			__kfifo->in++; \
-		} \
-	} \
-	__ret; \
-})
-
-/**
- * kfifo_get - get data from the fifo
- * @fifo: address of the fifo to be used
- * @val: the var where to store the data to be added
- *
- * This macro reads the data from the fifo.
- * It returns 0 if the fifo was empty. Otherwise it returns the number
- * processed elements.
- *
- * Note that with only one concurrent reader and one concurrent
- * writer, you don't need extra locking to use these macro.
- */
-#define	kfifo_get(fifo, val) \
-__kfifo_uint_must_check_helper( \
-({ \
-	typeof((fifo) + 1) __tmp = (fifo); \
-	typeof((val) + 1) __val = (val); \
-	unsigned int __ret; \
-	const size_t __recsize = sizeof(*__tmp->rectype); \
-	struct __kfifo *__kfifo = &__tmp->kfifo; \
-	if (0) \
-		__val = (typeof(__tmp->ptr))0; \
-	if (__recsize) \
-		__ret = __kfifo_out_r(__kfifo, __val, sizeof(*__val), \
-			__recsize); \
-	else { \
-		__ret = !kfifo_is_empty(__tmp); \
-		if (__ret) { \
-			*(typeof(__tmp->type))__val = \
-				(__is_kfifo_ptr(__tmp) ? \
-				((typeof(__tmp->type))__kfifo->data) : \
-				(__tmp->buf) \
-				)[__kfifo->out & __tmp->kfifo.mask]; \
-			smp_wmb(); \
-			__kfifo->out++; \
-		} \
-	} \
-	__ret; \
-}) \
-)
-
-/**
- * kfifo_peek - get data from the fifo without removing
- * @fifo: address of the fifo to be used
- * @val: the var where to store the data to be added
- *
- * This reads the data from the fifo without removing it from the fifo.
- * It returns 0 if the fifo was empty. Otherwise it returns the number
- * processed elements.
- *
- * Note that with only one concurrent reader and one concurrent
- * writer, you don't need extra locking to use these macro.
- */
-#define	kfifo_peek(fifo, val) \
-__kfifo_uint_must_check_helper( \
-({ \
-	typeof((fifo) + 1) __tmp = (fifo); \
-	typeof((val) + 1) __val = (val); \
-	unsigned int __ret; \
-	const size_t __recsize = sizeof(*__tmp->rectype); \
-	struct __kfifo *__kfifo = &__tmp->kfifo; \
-	if (0) \
-		__val = (typeof(__tmp->ptr))NULL; \
-	if (__recsize) \
-		__ret = __kfifo_out_peek_r(__kfifo, __val, sizeof(*__val), \
-			__recsize); \
-	else { \
-		__ret = !kfifo_is_empty(__tmp); \
-		if (__ret) { \
-			*(typeof(__tmp->type))__val = \
-				(__is_kfifo_ptr(__tmp) ? \
-				((typeof(__tmp->type))__kfifo->data) : \
-				(__tmp->buf) \
-				)[__kfifo->out & __tmp->kfifo.mask]; \
-			smp_wmb(); \
-		} \
-	} \
-	__ret; \
-}) \
-)
-
-/**
- * kfifo_in - put data into the fifo
- * @fifo: address of the fifo to be used
- * @buf: the data to be added
- * @n: number of elements to be added
- *
- * This macro copies the given buffer into the fifo and returns the
- * number of copied elements.
- *
- * Note that with only one concurrent reader and one concurrent
- * writer, you don't need extra locking to use these macro.
- */
-#define	kfifo_in(fifo, buf, n) \
-({ \
-	typeof((fifo) + 1) __tmp = (fifo); \
-	typeof((buf) + 1) __buf = (buf); \
-	unsigned long __n = (n); \
-	const size_t __recsize = sizeof(*__tmp->rectype); \
-	struct __kfifo *__kfifo = &__tmp->kfifo; \
-	if (0) { \
-		typeof(__tmp->ptr_const) __dummy __attribute__ ((unused)); \
-		__dummy = (typeof(__buf))NULL; \
-	} \
-	(__recsize) ?\
-	__kfifo_in_r(__kfifo, __buf, __n, __recsize) : \
-	__kfifo_in(__kfifo, __buf, __n); \
-})
-
-/**
- * kfifo_in_spinlocked - put data into the fifo using a spinlock for locking
- * @fifo: address of the fifo to be used
- * @buf: the data to be added
- * @n: number of elements to be added
- * @lock: pointer to the spinlock to use for locking
- *
- * This macro copies the given values buffer into the fifo and returns the
- * number of copied elements.
- */
-#define	kfifo_in_spinlocked(fifo, buf, n, lock) \
-({ \
-	unsigned long __flags; \
-	unsigned int __ret; \
-	spin_lock_irqsave(lock, __flags); \
-	__ret = kfifo_in(fifo, buf, n); \
-	spin_unlock_irqrestore(lock, __flags); \
-	__ret; \
-})
-
-/* alias for kfifo_in_spinlocked, will be removed in a future release */
-#define kfifo_in_locked(fifo, buf, n, lock) \
-		kfifo_in_spinlocked(fifo, buf, n, lock)
-
-/**
- * kfifo_out - get data from the fifo
- * @fifo: address of the fifo to be used
- * @buf: pointer to the storage buffer
- * @n: max. number of elements to get
- *
- * This macro get some data from the fifo and return the numbers of elements
- * copied.
- *
- * Note that with only one concurrent reader and one concurrent
- * writer, you don't need extra locking to use these macro.
- */
-#define	kfifo_out(fifo, buf, n) \
-__kfifo_uint_must_check_helper( \
-({ \
-	typeof((fifo) + 1) __tmp = (fifo); \
-	typeof((buf) + 1) __buf = (buf); \
-	unsigned long __n = (n); \
-	const size_t __recsize = sizeof(*__tmp->rectype); \
-	struct __kfifo *__kfifo = &__tmp->kfifo; \
-	if (0) { \
-		typeof(__tmp->ptr) __dummy = NULL; \
-		__buf = __dummy; \
-	} \
-	(__recsize) ?\
-	__kfifo_out_r(__kfifo, __buf, __n, __recsize) : \
-	__kfifo_out(__kfifo, __buf, __n); \
-}) \
-)
-
-/**
- * kfifo_out_spinlocked - get data from the fifo using a spinlock for locking
- * @fifo: address of the fifo to be used
- * @buf: pointer to the storage buffer
- * @n: max. number of elements to get
- * @lock: pointer to the spinlock to use for locking
- *
- * This macro get the data from the fifo and return the numbers of elements
- * copied.
- */
-#define	kfifo_out_spinlocked(fifo, buf, n, lock) \
-__kfifo_uint_must_check_helper( \
-({ \
-	unsigned long __flags; \
-	unsigned int __ret; \
-	spin_lock_irqsave(lock, __flags); \
-	__ret = kfifo_out(fifo, buf, n); \
-	spin_unlock_irqrestore(lock, __flags); \
-	__ret; \
-}) \
-)
-
-/* alias for kfifo_out_spinlocked, will be removed in a future release */
-#define kfifo_out_locked(fifo, buf, n, lock) \
-		kfifo_out_spinlocked(fifo, buf, n, lock)
-
-/**
- * kfifo_from_user - puts some data from user space into the fifo
- * @fifo: address of the fifo to be used
- * @from: pointer to the data to be added
- * @len: the length of the data to be added
- * @copied: pointer to output variable to store the number of copied bytes
- *
- * This macro copies at most @len bytes from the @from into the
- * fifo, depending of the available space and returns -EFAULT/0.
- *
- * Note that with only one concurrent reader and one concurrent
- * writer, you don't need extra locking to use these macro.
- */
-#define	kfifo_from_user(fifo, from, len, copied) \
-__kfifo_uint_must_check_helper( \
-({ \
-	typeof((fifo) + 1) __tmp = (fifo); \
-	const void __user *__from = (from); \
-	unsigned int __len = (len); \
-	unsigned int *__copied = (copied); \
-	const size_t __recsize = sizeof(*__tmp->rectype); \
-	struct __kfifo *__kfifo = &__tmp->kfifo; \
-	(__recsize) ? \
-	__kfifo_from_user_r(__kfifo, __from, __len,  __copied, __recsize) : \
-	__kfifo_from_user(__kfifo, __from, __len, __copied); \
-}) \
-)
-
-/**
- * kfifo_to_user - copies data from the fifo into user space
- * @fifo: address of the fifo to be used
- * @to: where the data must be copied
- * @len: the size of the destination buffer
- * @copied: pointer to output variable to store the number of copied bytes
- *
- * This macro copies at most @len bytes from the fifo into the
- * @to buffer and returns -EFAULT/0.
- *
- * Note that with only one concurrent reader and one concurrent
- * writer, you don't need extra locking to use these macro.
- */
-#define	kfifo_to_user(fifo, to, len, copied) \
-__kfifo_uint_must_check_helper( \
-({ \
-	typeof((fifo) + 1) __tmp = (fifo); \
-	void __user *__to = (to); \
-	unsigned int __len = (len); \
-	unsigned int *__copied = (copied); \
-	const size_t __recsize = sizeof(*__tmp->rectype); \
-	struct __kfifo *__kfifo = &__tmp->kfifo; \
-	(__recsize) ? \
-	__kfifo_to_user_r(__kfifo, __to, __len, __copied, __recsize) : \
-	__kfifo_to_user(__kfifo, __to, __len, __copied); \
-}) \
-)
-
-/**
- * kfifo_dma_in_prepare - setup a scatterlist for DMA input
- * @fifo: address of the fifo to be used
- * @sgl: pointer to the scatterlist array
- * @nents: number of entries in the scatterlist array
- * @len: number of elements to transfer
- *
- * This macro fills a scatterlist for DMA input.
- * It returns the number entries in the scatterlist array.
- *
- * Note that with only one concurrent reader and one concurrent
- * writer, you don't need extra locking to use these macros.
- */
-#define	kfifo_dma_in_prepare(fifo, sgl, nents, len) \
-({ \
-	typeof((fifo) + 1) __tmp = (fifo); \
-	struct scatterlist *__sgl = (sgl); \
-	int __nents = (nents); \
-	unsigned int __len = (len); \
-	const size_t __recsize = sizeof(*__tmp->rectype); \
-	struct __kfifo *__kfifo = &__tmp->kfifo; \
-	(__recsize) ? \
-	__kfifo_dma_in_prepare_r(__kfifo, __sgl, __nents, __len, __recsize) : \
-	__kfifo_dma_in_prepare(__kfifo, __sgl, __nents, __len); \
-})
-
-/**
- * kfifo_dma_in_finish - finish a DMA IN operation
- * @fifo: address of the fifo to be used
- * @len: number of bytes to received
- *
- * This macro finish a DMA IN operation. The in counter will be updated by
- * the len parameter. No error checking will be done.
- *
- * Note that with only one concurrent reader and one concurrent
- * writer, you don't need extra locking to use these macros.
- */
-#define kfifo_dma_in_finish(fifo, len) \
-(void)({ \
-	typeof((fifo) + 1) __tmp = (fifo); \
-	unsigned int __len = (len); \
-	const size_t __recsize = sizeof(*__tmp->rectype); \
-	struct __kfifo *__kfifo = &__tmp->kfifo; \
-	if (__recsize) \
-		__kfifo_dma_in_finish_r(__kfifo, __len, __recsize); \
-	else \
-		__kfifo->in += __len / sizeof(*__tmp->type); \
-})
-
-/**
- * kfifo_dma_out_prepare - setup a scatterlist for DMA output
- * @fifo: address of the fifo to be used
- * @sgl: pointer to the scatterlist array
- * @nents: number of entries in the scatterlist array
- * @len: number of elements to transfer
- *
- * This macro fills a scatterlist for DMA output which at most @len bytes
- * to transfer.
- * It returns the number entries in the scatterlist array.
- * A zero means there is no space available and the scatterlist is not filled.
- *
- * Note that with only one concurrent reader and one concurrent
- * writer, you don't need extra locking to use these macros.
- */
-#define	kfifo_dma_out_prepare(fifo, sgl, nents, len) \
-({ \
-	typeof((fifo) + 1) __tmp = (fifo);  \
-	struct scatterlist *__sgl = (sgl); \
-	int __nents = (nents); \
-	unsigned int __len = (len); \
-	const size_t __recsize = sizeof(*__tmp->rectype); \
-	struct __kfifo *__kfifo = &__tmp->kfifo; \
-	(__recsize) ? \
-	__kfifo_dma_out_prepare_r(__kfifo, __sgl, __nents, __len, __recsize) : \
-	__kfifo_dma_out_prepare(__kfifo, __sgl, __nents, __len); \
-})
-
-/**
- * kfifo_dma_out_finish - finish a DMA OUT operation
- * @fifo: address of the fifo to be used
- * @len: number of bytes transferd
- *
- * This macro finish a DMA OUT operation. The out counter will be updated by
- * the len parameter. No error checking will be done.
- *
- * Note that with only one concurrent reader and one concurrent
- * writer, you don't need extra locking to use these macros.
- */
-#define kfifo_dma_out_finish(fifo, len) \
-(void)({ \
-	typeof((fifo) + 1) __tmp = (fifo); \
-	unsigned int __len = (len); \
-	const size_t __recsize = sizeof(*__tmp->rectype); \
-	struct __kfifo *__kfifo = &__tmp->kfifo; \
-	if (__recsize) \
-		__kfifo_dma_out_finish_r(__kfifo, __recsize); \
-	else \
-		__kfifo->out += __len / sizeof(*__tmp->type); \
-})
-
-/**
- * kfifo_out_peek - gets some data from the fifo
- * @fifo: address of the fifo to be used
- * @buf: pointer to the storage buffer
- * @n: max. number of elements to get
- *
- * This macro get the data from the fifo and return the numbers of elements
- * copied. The data is not removed from the fifo.
- *
- * Note that with only one concurrent reader and one concurrent
- * writer, you don't need extra locking to use these macro.
- */
-#define	kfifo_out_peek(fifo, buf, n) \
-__kfifo_uint_must_check_helper( \
-({ \
-	typeof((fifo) + 1) __tmp = (fifo); \
-	typeof((buf) + 1) __buf = (buf); \
-	unsigned long __n = (n); \
-	const size_t __recsize = sizeof(*__tmp->rectype); \
-	struct __kfifo *__kfifo = &__tmp->kfifo; \
-	if (0) { \
-		typeof(__tmp->ptr) __dummy __attribute__ ((unused)) = NULL; \
-		__buf = __dummy; \
-	} \
-	(__recsize) ? \
-	__kfifo_out_peek_r(__kfifo, __buf, __n, __recsize) : \
-	__kfifo_out_peek(__kfifo, __buf, __n); \
-}) \
-)
-
-extern int __kfifo_alloc(struct __kfifo *fifo, unsigned int size,
-	size_t esize, gfp_t gfp_mask);
-
-extern void __kfifo_free(struct __kfifo *fifo);
-
-extern int __kfifo_init(struct __kfifo *fifo, void *buffer,
-	unsigned int size, size_t esize);
-
-extern unsigned int __kfifo_in(struct __kfifo *fifo,
-	const void *buf, unsigned int len);
-
-extern unsigned int __kfifo_out(struct __kfifo *fifo,
-	void *buf, unsigned int len);
-
-extern int __kfifo_from_user(struct __kfifo *fifo,
-	const void __user *from, unsigned long len, unsigned int *copied);
-
-extern int __kfifo_to_user(struct __kfifo *fifo,
-	void __user *to, unsigned long len, unsigned int *copied);
-
-extern unsigned int __kfifo_dma_in_prepare(struct __kfifo *fifo,
-	struct scatterlist *sgl, int nents, unsigned int len);
-
-extern unsigned int __kfifo_dma_out_prepare(struct __kfifo *fifo,
-	struct scatterlist *sgl, int nents, unsigned int len);
-
-extern unsigned int __kfifo_out_peek(struct __kfifo *fifo,
-	void *buf, unsigned int len);
-
-extern unsigned int __kfifo_in_r(struct __kfifo *fifo,
-	const void *buf, unsigned int len, size_t recsize);
-
-extern unsigned int __kfifo_out_r(struct __kfifo *fifo,
-	void *buf, unsigned int len, size_t recsize);
-
-extern int __kfifo_from_user_r(struct __kfifo *fifo,
-	const void __user *from, unsigned long len, unsigned int *copied,
-	size_t recsize);
-
-extern int __kfifo_to_user_r(struct __kfifo *fifo, void __user *to,
-	unsigned long len, unsigned int *copied, size_t recsize);
-
-extern unsigned int __kfifo_dma_in_prepare_r(struct __kfifo *fifo,
-	struct scatterlist *sgl, int nents, unsigned int len, size_t recsize);
-
-extern void __kfifo_dma_in_finish_r(struct __kfifo *fifo,
-	unsigned int len, size_t recsize);
-
-extern unsigned int __kfifo_dma_out_prepare_r(struct __kfifo *fifo,
-	struct scatterlist *sgl, int nents, unsigned int len, size_t recsize);
-
-extern void __kfifo_dma_out_finish_r(struct __kfifo *fifo, size_t recsize);
-
-extern unsigned int __kfifo_len_r(struct __kfifo *fifo, size_t recsize);
-
-extern void __kfifo_skip_r(struct __kfifo *fifo, size_t recsize);
-
-extern unsigned int __kfifo_out_peek_r(struct __kfifo *fifo,
-	void *buf, unsigned int len, size_t recsize);
-
-extern unsigned int __kfifo_max_r(unsigned int len, size_t recsize);
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/kgdb.h b/ANDROID_3.4.5/include/linux/kgdb.h
deleted file mode 100644
index c4d2fc19..00000000
--- a/ANDROID_3.4.5/include/linux/kgdb.h
+++ /dev/null
@@ -1,313 +0,0 @@
-/*
- * This provides the callbacks and functions that KGDB needs to share between
- * the core, I/O and arch-specific portions.
- *
- * Author: Amit Kale <amitkale@linsyssoft.com> and
- *         Tom Rini <trini@kernel.crashing.org>
- *
- * 2001-2004 (c) Amit S. Kale and 2003-2005 (c) MontaVista Software, Inc.
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-#ifndef _KGDB_H_
-#define _KGDB_H_
-
-#include <linux/serial_8250.h>
-#include <linux/linkage.h>
-#include <linux/init.h>
-#include <linux/atomic.h>
-#ifdef CONFIG_HAVE_ARCH_KGDB
-#include <asm/kgdb.h>
-#endif
-
-#ifdef CONFIG_KGDB
-struct pt_regs;
-
-/**
- *	kgdb_skipexception - (optional) exit kgdb_handle_exception early
- *	@exception: Exception vector number
- *	@regs: Current &struct pt_regs.
- *
- *	On some architectures it is required to skip a breakpoint
- *	exception when it occurs after a breakpoint has been removed.
- *	This can be implemented in the architecture specific portion of kgdb.
- */
-extern int kgdb_skipexception(int exception, struct pt_regs *regs);
-
-struct tasklet_struct;
-struct task_struct;
-struct uart_port;
-
-/**
- *	kgdb_breakpoint - compiled in breakpoint
- *
- *	This will be implemented as a static inline per architecture.  This
- *	function is called by the kgdb core to execute an architecture
- *	specific trap to cause kgdb to enter the exception processing.
- *
- */
-void kgdb_breakpoint(void);
-
-extern int kgdb_connected;
-extern int kgdb_io_module_registered;
-
-extern atomic_t			kgdb_setting_breakpoint;
-extern atomic_t			kgdb_cpu_doing_single_step;
-
-extern struct task_struct	*kgdb_usethread;
-extern struct task_struct	*kgdb_contthread;
-
-enum kgdb_bptype {
-	BP_BREAKPOINT = 0,
-	BP_HARDWARE_BREAKPOINT,
-	BP_WRITE_WATCHPOINT,
-	BP_READ_WATCHPOINT,
-	BP_ACCESS_WATCHPOINT,
-	BP_POKE_BREAKPOINT,
-};
-
-enum kgdb_bpstate {
-	BP_UNDEFINED = 0,
-	BP_REMOVED,
-	BP_SET,
-	BP_ACTIVE
-};
-
-struct kgdb_bkpt {
-	unsigned long		bpt_addr;
-	unsigned char		saved_instr[BREAK_INSTR_SIZE];
-	enum kgdb_bptype	type;
-	enum kgdb_bpstate	state;
-};
-
-struct dbg_reg_def_t {
-	char *name;
-	int size;
-	int offset;
-};
-
-#ifndef DBG_MAX_REG_NUM
-#define DBG_MAX_REG_NUM 0
-#else
-extern struct dbg_reg_def_t dbg_reg_def[];
-extern char *dbg_get_reg(int regno, void *mem, struct pt_regs *regs);
-extern int dbg_set_reg(int regno, void *mem, struct pt_regs *regs);
-#endif
-#ifndef KGDB_MAX_BREAKPOINTS
-# define KGDB_MAX_BREAKPOINTS	1000
-#endif
-
-#define KGDB_HW_BREAKPOINT	1
-
-/*
- * Functions each KGDB-supporting architecture must provide:
- */
-
-/**
- *	kgdb_arch_init - Perform any architecture specific initalization.
- *
- *	This function will handle the initalization of any architecture
- *	specific callbacks.
- */
-extern int kgdb_arch_init(void);
-
-/**
- *	kgdb_arch_exit - Perform any architecture specific uninitalization.
- *
- *	This function will handle the uninitalization of any architecture
- *	specific callbacks, for dynamic registration and unregistration.
- */
-extern void kgdb_arch_exit(void);
-
-/**
- *	pt_regs_to_gdb_regs - Convert ptrace regs to GDB regs
- *	@gdb_regs: A pointer to hold the registers in the order GDB wants.
- *	@regs: The &struct pt_regs of the current process.
- *
- *	Convert the pt_regs in @regs into the format for registers that
- *	GDB expects, stored in @gdb_regs.
- */
-extern void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *regs);
-
-/**
- *	sleeping_thread_to_gdb_regs - Convert ptrace regs to GDB regs
- *	@gdb_regs: A pointer to hold the registers in the order GDB wants.
- *	@p: The &struct task_struct of the desired process.
- *
- *	Convert the register values of the sleeping process in @p to
- *	the format that GDB expects.
- *	This function is called when kgdb does not have access to the
- *	&struct pt_regs and therefore it should fill the gdb registers
- *	@gdb_regs with what has	been saved in &struct thread_struct
- *	thread field during switch_to.
- */
-extern void
-sleeping_thread_to_gdb_regs(unsigned long *gdb_regs, struct task_struct *p);
-
-/**
- *	gdb_regs_to_pt_regs - Convert GDB regs to ptrace regs.
- *	@gdb_regs: A pointer to hold the registers we've received from GDB.
- *	@regs: A pointer to a &struct pt_regs to hold these values in.
- *
- *	Convert the GDB regs in @gdb_regs into the pt_regs, and store them
- *	in @regs.
- */
-extern void gdb_regs_to_pt_regs(unsigned long *gdb_regs, struct pt_regs *regs);
-
-/**
- *	kgdb_arch_handle_exception - Handle architecture specific GDB packets.
- *	@vector: The error vector of the exception that happened.
- *	@signo: The signal number of the exception that happened.
- *	@err_code: The error code of the exception that happened.
- *	@remcom_in_buffer: The buffer of the packet we have read.
- *	@remcom_out_buffer: The buffer of %BUFMAX bytes to write a packet into.
- *	@regs: The &struct pt_regs of the current process.
- *
- *	This function MUST handle the 'c' and 's' command packets,
- *	as well packets to set / remove a hardware breakpoint, if used.
- *	If there are additional packets which the hardware needs to handle,
- *	they are handled here.  The code should return -1 if it wants to
- *	process more packets, and a %0 or %1 if it wants to exit from the
- *	kgdb callback.
- */
-extern int
-kgdb_arch_handle_exception(int vector, int signo, int err_code,
-			   char *remcom_in_buffer,
-			   char *remcom_out_buffer,
-			   struct pt_regs *regs);
-
-/**
- *	kgdb_roundup_cpus - Get other CPUs into a holding pattern
- *	@flags: Current IRQ state
- *
- *	On SMP systems, we need to get the attention of the other CPUs
- *	and get them into a known state.  This should do what is needed
- *	to get the other CPUs to call kgdb_wait(). Note that on some arches,
- *	the NMI approach is not used for rounding up all the CPUs. For example,
- *	in case of MIPS, smp_call_function() is used to roundup CPUs. In
- *	this case, we have to make sure that interrupts are enabled before
- *	calling smp_call_function(). The argument to this function is
- *	the flags that will be used when restoring the interrupts. There is
- *	local_irq_save() call before kgdb_roundup_cpus().
- *
- *	On non-SMP systems, this is not called.
- */
-extern void kgdb_roundup_cpus(unsigned long flags);
-
-/**
- *	kgdb_arch_set_pc - Generic call back to the program counter
- *	@regs: Current &struct pt_regs.
- *  @pc: The new value for the program counter
- *
- *	This function handles updating the program counter and requires an
- *	architecture specific implementation.
- */
-extern void kgdb_arch_set_pc(struct pt_regs *regs, unsigned long pc);
-
-
-/* Optional functions. */
-extern int kgdb_validate_break_address(unsigned long addr);
-extern int kgdb_arch_set_breakpoint(struct kgdb_bkpt *bpt);
-extern int kgdb_arch_remove_breakpoint(struct kgdb_bkpt *bpt);
-
-/**
- *	kgdb_arch_late - Perform any architecture specific initalization.
- *
- *	This function will handle the late initalization of any
- *	architecture specific callbacks.  This is an optional function for
- *	handling things like late initialization of hw breakpoints.  The
- *	default implementation does nothing.
- */
-extern void kgdb_arch_late(void);
-
-
-/**
- * struct kgdb_arch - Describe architecture specific values.
- * @gdb_bpt_instr: The instruction to trigger a breakpoint.
- * @flags: Flags for the breakpoint, currently just %KGDB_HW_BREAKPOINT.
- * @set_breakpoint: Allow an architecture to specify how to set a software
- * breakpoint.
- * @remove_breakpoint: Allow an architecture to specify how to remove a
- * software breakpoint.
- * @set_hw_breakpoint: Allow an architecture to specify how to set a hardware
- * breakpoint.
- * @remove_hw_breakpoint: Allow an architecture to specify how to remove a
- * hardware breakpoint.
- * @disable_hw_break: Allow an architecture to specify how to disable
- * hardware breakpoints for a single cpu.
- * @remove_all_hw_break: Allow an architecture to specify how to remove all
- * hardware breakpoints.
- * @correct_hw_break: Allow an architecture to specify how to correct the
- * hardware debug registers.
- */
-struct kgdb_arch {
-	unsigned char		gdb_bpt_instr[BREAK_INSTR_SIZE];
-	unsigned long		flags;
-
-	int	(*set_breakpoint)(unsigned long, char *);
-	int	(*remove_breakpoint)(unsigned long, char *);
-	int	(*set_hw_breakpoint)(unsigned long, int, enum kgdb_bptype);
-	int	(*remove_hw_breakpoint)(unsigned long, int, enum kgdb_bptype);
-	void	(*disable_hw_break)(struct pt_regs *regs);
-	void	(*remove_all_hw_break)(void);
-	void	(*correct_hw_break)(void);
-};
-
-/**
- * struct kgdb_io - Describe the interface for an I/O driver to talk with KGDB.
- * @name: Name of the I/O driver.
- * @read_char: Pointer to a function that will return one char.
- * @write_char: Pointer to a function that will write one char.
- * @flush: Pointer to a function that will flush any pending writes.
- * @init: Pointer to a function that will initialize the device.
- * @pre_exception: Pointer to a function that will do any prep work for
- * the I/O driver.
- * @post_exception: Pointer to a function that will do any cleanup work
- * for the I/O driver.
- * @is_console: 1 if the end device is a console 0 if the I/O device is
- * not a console
- */
-struct kgdb_io {
-	const char		*name;
-	int			(*read_char) (void);
-	void			(*write_char) (u8);
-	void			(*flush) (void);
-	int			(*init) (void);
-	void			(*pre_exception) (void);
-	void			(*post_exception) (void);
-	int			is_console;
-};
-
-extern struct kgdb_arch		arch_kgdb_ops;
-
-extern unsigned long __weak kgdb_arch_pc(int exception, struct pt_regs *regs);
-
-extern int kgdb_register_io_module(struct kgdb_io *local_kgdb_io_ops);
-extern void kgdb_unregister_io_module(struct kgdb_io *local_kgdb_io_ops);
-extern struct kgdb_io *dbg_io_ops;
-
-extern int kgdb_hex2long(char **ptr, unsigned long *long_val);
-extern char *kgdb_mem2hex(char *mem, char *buf, int count);
-extern int kgdb_hex2mem(char *buf, char *mem, int count);
-
-extern int kgdb_isremovedbreak(unsigned long addr);
-extern void kgdb_schedule_breakpoint(void);
-
-extern int
-kgdb_handle_exception(int ex_vector, int signo, int err_code,
-		      struct pt_regs *regs);
-extern int kgdb_nmicallback(int cpu, void *regs);
-extern void gdbstub_exit(int status);
-
-extern int			kgdb_single_step;
-extern atomic_t			kgdb_active;
-#define in_dbg_master() \
-	(raw_smp_processor_id() == atomic_read(&kgdb_active))
-extern bool dbg_is_early;
-extern void __init dbg_late_init(void);
-#else /* ! CONFIG_KGDB */
-#define in_dbg_master() (0)
-#define dbg_late_init()
-#endif /* ! CONFIG_KGDB */
-#endif /* _KGDB_H_ */
diff --git a/ANDROID_3.4.5/include/linux/khugepaged.h b/ANDROID_3.4.5/include/linux/khugepaged.h
deleted file mode 100644
index 6b394f0b..00000000
--- a/ANDROID_3.4.5/include/linux/khugepaged.h
+++ /dev/null
@@ -1,67 +0,0 @@
-#ifndef _LINUX_KHUGEPAGED_H
-#define _LINUX_KHUGEPAGED_H
-
-#include <linux/sched.h> /* MMF_VM_HUGEPAGE */
-
-#ifdef CONFIG_TRANSPARENT_HUGEPAGE
-extern int __khugepaged_enter(struct mm_struct *mm);
-extern void __khugepaged_exit(struct mm_struct *mm);
-extern int khugepaged_enter_vma_merge(struct vm_area_struct *vma);
-
-#define khugepaged_enabled()					       \
-	(transparent_hugepage_flags &				       \
-	 ((1<<TRANSPARENT_HUGEPAGE_FLAG) |		       \
-	  (1<<TRANSPARENT_HUGEPAGE_REQ_MADV_FLAG)))
-#define khugepaged_always()				\
-	(transparent_hugepage_flags &			\
-	 (1<<TRANSPARENT_HUGEPAGE_FLAG))
-#define khugepaged_req_madv()					\
-	(transparent_hugepage_flags &				\
-	 (1<<TRANSPARENT_HUGEPAGE_REQ_MADV_FLAG))
-#define khugepaged_defrag()					\
-	(transparent_hugepage_flags &				\
-	 (1<<TRANSPARENT_HUGEPAGE_DEFRAG_KHUGEPAGED_FLAG))
-
-static inline int khugepaged_fork(struct mm_struct *mm, struct mm_struct *oldmm)
-{
-	if (test_bit(MMF_VM_HUGEPAGE, &oldmm->flags))
-		return __khugepaged_enter(mm);
-	return 0;
-}
-
-static inline void khugepaged_exit(struct mm_struct *mm)
-{
-	if (test_bit(MMF_VM_HUGEPAGE, &mm->flags))
-		__khugepaged_exit(mm);
-}
-
-static inline int khugepaged_enter(struct vm_area_struct *vma)
-{
-	if (!test_bit(MMF_VM_HUGEPAGE, &vma->vm_mm->flags))
-		if ((khugepaged_always() ||
-		     (khugepaged_req_madv() &&
-		      vma->vm_flags & VM_HUGEPAGE)) &&
-		    !(vma->vm_flags & VM_NOHUGEPAGE))
-			if (__khugepaged_enter(vma->vm_mm))
-				return -ENOMEM;
-	return 0;
-}
-#else /* CONFIG_TRANSPARENT_HUGEPAGE */
-static inline int khugepaged_fork(struct mm_struct *mm, struct mm_struct *oldmm)
-{
-	return 0;
-}
-static inline void khugepaged_exit(struct mm_struct *mm)
-{
-}
-static inline int khugepaged_enter(struct vm_area_struct *vma)
-{
-	return 0;
-}
-static inline int khugepaged_enter_vma_merge(struct vm_area_struct *vma)
-{
-	return 0;
-}
-#endif /* CONFIG_TRANSPARENT_HUGEPAGE */
-
-#endif /* _LINUX_KHUGEPAGED_H */
diff --git a/ANDROID_3.4.5/include/linux/klist.h b/ANDROID_3.4.5/include/linux/klist.h
deleted file mode 100644
index a370ce57..00000000
--- a/ANDROID_3.4.5/include/linux/klist.h
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- *	klist.h - Some generic list helpers, extending struct list_head a bit.
- *
- *	Implementations are found in lib/klist.c
- *
- *
- *	Copyright (C) 2005 Patrick Mochel
- *
- *	This file is rleased under the GPL v2.
- */
-
-#ifndef _LINUX_KLIST_H
-#define _LINUX_KLIST_H
-
-#include <linux/spinlock.h>
-#include <linux/kref.h>
-#include <linux/list.h>
-
-struct klist_node;
-struct klist {
-	spinlock_t		k_lock;
-	struct list_head	k_list;
-	void			(*get)(struct klist_node *);
-	void			(*put)(struct klist_node *);
-} __attribute__ ((aligned (sizeof(void *))));
-
-#define KLIST_INIT(_name, _get, _put)					\
-	{ .k_lock	= __SPIN_LOCK_UNLOCKED(_name.k_lock),		\
-	  .k_list	= LIST_HEAD_INIT(_name.k_list),			\
-	  .get		= _get,						\
-	  .put		= _put, }
-
-#define DEFINE_KLIST(_name, _get, _put)					\
-	struct klist _name = KLIST_INIT(_name, _get, _put)
-
-extern void klist_init(struct klist *k, void (*get)(struct klist_node *),
-		       void (*put)(struct klist_node *));
-
-struct klist_node {
-	void			*n_klist;	/* never access directly */
-	struct list_head	n_node;
-	struct kref		n_ref;
-};
-
-extern void klist_add_tail(struct klist_node *n, struct klist *k);
-extern void klist_add_head(struct klist_node *n, struct klist *k);
-extern void klist_add_after(struct klist_node *n, struct klist_node *pos);
-extern void klist_add_before(struct klist_node *n, struct klist_node *pos);
-
-extern void klist_del(struct klist_node *n);
-extern void klist_remove(struct klist_node *n);
-
-extern int klist_node_attached(struct klist_node *n);
-
-
-struct klist_iter {
-	struct klist		*i_klist;
-	struct klist_node	*i_cur;
-};
-
-
-extern void klist_iter_init(struct klist *k, struct klist_iter *i);
-extern void klist_iter_init_node(struct klist *k, struct klist_iter *i,
-				 struct klist_node *n);
-extern void klist_iter_exit(struct klist_iter *i);
-extern struct klist_node *klist_next(struct klist_iter *i);
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/kmalloc_sizes.h b/ANDROID_3.4.5/include/linux/kmalloc_sizes.h
deleted file mode 100644
index e576b848..00000000
--- a/ANDROID_3.4.5/include/linux/kmalloc_sizes.h
+++ /dev/null
@@ -1,45 +0,0 @@
-#if (PAGE_SIZE == 4096)
-	CACHE(32)
-#endif
-	CACHE(64)
-#if L1_CACHE_BYTES < 64
-	CACHE(96)
-#endif
-	CACHE(128)
-#if L1_CACHE_BYTES < 128
-	CACHE(192)
-#endif
-	CACHE(256)
-	CACHE(512)
-	CACHE(1024)
-	CACHE(2048)
-	CACHE(4096)
-	CACHE(8192)
-	CACHE(16384)
-	CACHE(32768)
-	CACHE(65536)
-	CACHE(131072)
-#if KMALLOC_MAX_SIZE >= 262144
-	CACHE(262144)
-#endif
-#if KMALLOC_MAX_SIZE >= 524288
-	CACHE(524288)
-#endif
-#if KMALLOC_MAX_SIZE >= 1048576
-	CACHE(1048576)
-#endif
-#if KMALLOC_MAX_SIZE >= 2097152
-	CACHE(2097152)
-#endif
-#if KMALLOC_MAX_SIZE >= 4194304
-	CACHE(4194304)
-#endif
-#if KMALLOC_MAX_SIZE >= 8388608
-	CACHE(8388608)
-#endif
-#if KMALLOC_MAX_SIZE >= 16777216
-	CACHE(16777216)
-#endif
-#if KMALLOC_MAX_SIZE >= 33554432
-	CACHE(33554432)
-#endif
diff --git a/ANDROID_3.4.5/include/linux/kmemcheck.h b/ANDROID_3.4.5/include/linux/kmemcheck.h
deleted file mode 100644
index 39f84532..00000000
--- a/ANDROID_3.4.5/include/linux/kmemcheck.h
+++ /dev/null
@@ -1,171 +0,0 @@
-#ifndef LINUX_KMEMCHECK_H
-#define LINUX_KMEMCHECK_H
-
-#include <linux/mm_types.h>
-#include <linux/types.h>
-
-#ifdef CONFIG_KMEMCHECK
-extern int kmemcheck_enabled;
-
-/* The slab-related functions. */
-void kmemcheck_alloc_shadow(struct page *page, int order, gfp_t flags, int node);
-void kmemcheck_free_shadow(struct page *page, int order);
-void kmemcheck_slab_alloc(struct kmem_cache *s, gfp_t gfpflags, void *object,
-			  size_t size);
-void kmemcheck_slab_free(struct kmem_cache *s, void *object, size_t size);
-
-void kmemcheck_pagealloc_alloc(struct page *p, unsigned int order,
-			       gfp_t gfpflags);
-
-void kmemcheck_show_pages(struct page *p, unsigned int n);
-void kmemcheck_hide_pages(struct page *p, unsigned int n);
-
-bool kmemcheck_page_is_tracked(struct page *p);
-
-void kmemcheck_mark_unallocated(void *address, unsigned int n);
-void kmemcheck_mark_uninitialized(void *address, unsigned int n);
-void kmemcheck_mark_initialized(void *address, unsigned int n);
-void kmemcheck_mark_freed(void *address, unsigned int n);
-
-void kmemcheck_mark_unallocated_pages(struct page *p, unsigned int n);
-void kmemcheck_mark_uninitialized_pages(struct page *p, unsigned int n);
-void kmemcheck_mark_initialized_pages(struct page *p, unsigned int n);
-
-int kmemcheck_show_addr(unsigned long address);
-int kmemcheck_hide_addr(unsigned long address);
-
-bool kmemcheck_is_obj_initialized(unsigned long addr, size_t size);
-
-/*
- * Bitfield annotations
- *
- * How to use: If you have a struct using bitfields, for example
- *
- *     struct a {
- *             int x:8, y:8;
- *     };
- *
- * then this should be rewritten as
- *
- *     struct a {
- *             kmemcheck_bitfield_begin(flags);
- *             int x:8, y:8;
- *             kmemcheck_bitfield_end(flags);
- *     };
- *
- * Now the "flags_begin" and "flags_end" members may be used to refer to the
- * beginning and end, respectively, of the bitfield (and things like
- * &x.flags_begin is allowed). As soon as the struct is allocated, the bit-
- * fields should be annotated:
- *
- *     struct a *a = kmalloc(sizeof(struct a), GFP_KERNEL);
- *     kmemcheck_annotate_bitfield(a, flags);
- */
-#define kmemcheck_bitfield_begin(name)	\
-	int name##_begin[0];
-
-#define kmemcheck_bitfield_end(name)	\
-	int name##_end[0];
-
-#define kmemcheck_annotate_bitfield(ptr, name)				\
-	do {								\
-		int _n;							\
-									\
-		if (!ptr)						\
-			break;						\
-									\
-		_n = (long) &((ptr)->name##_end)			\
-			- (long) &((ptr)->name##_begin);		\
-		BUILD_BUG_ON(_n < 0);					\
-									\
-		kmemcheck_mark_initialized(&((ptr)->name##_begin), _n);	\
-	} while (0)
-
-#define kmemcheck_annotate_variable(var)				\
-	do {								\
-		kmemcheck_mark_initialized(&(var), sizeof(var));	\
-	} while (0)							\
-
-#else
-#define kmemcheck_enabled 0
-
-static inline void
-kmemcheck_alloc_shadow(struct page *page, int order, gfp_t flags, int node)
-{
-}
-
-static inline void
-kmemcheck_free_shadow(struct page *page, int order)
-{
-}
-
-static inline void
-kmemcheck_slab_alloc(struct kmem_cache *s, gfp_t gfpflags, void *object,
-		     size_t size)
-{
-}
-
-static inline void kmemcheck_slab_free(struct kmem_cache *s, void *object,
-				       size_t size)
-{
-}
-
-static inline void kmemcheck_pagealloc_alloc(struct page *p,
-	unsigned int order, gfp_t gfpflags)
-{
-}
-
-static inline bool kmemcheck_page_is_tracked(struct page *p)
-{
-	return false;
-}
-
-static inline void kmemcheck_mark_unallocated(void *address, unsigned int n)
-{
-}
-
-static inline void kmemcheck_mark_uninitialized(void *address, unsigned int n)
-{
-}
-
-static inline void kmemcheck_mark_initialized(void *address, unsigned int n)
-{
-}
-
-static inline void kmemcheck_mark_freed(void *address, unsigned int n)
-{
-}
-
-static inline void kmemcheck_mark_unallocated_pages(struct page *p,
-						    unsigned int n)
-{
-}
-
-static inline void kmemcheck_mark_uninitialized_pages(struct page *p,
-						      unsigned int n)
-{
-}
-
-static inline void kmemcheck_mark_initialized_pages(struct page *p,
-						    unsigned int n)
-{
-}
-
-static inline bool kmemcheck_is_obj_initialized(unsigned long addr, size_t size)
-{
-	return true;
-}
-
-#define kmemcheck_bitfield_begin(name)
-#define kmemcheck_bitfield_end(name)
-#define kmemcheck_annotate_bitfield(ptr, name)	\
-	do {					\
-	} while (0)
-
-#define kmemcheck_annotate_variable(var)	\
-	do {					\
-	} while (0)
-
-#endif /* CONFIG_KMEMCHECK */
-
-#endif /* LINUX_KMEMCHECK_H */
diff --git a/ANDROID_3.4.5/include/linux/kmemleak.h b/ANDROID_3.4.5/include/linux/kmemleak.h
deleted file mode 100644
index 2a5e5548..00000000
--- a/ANDROID_3.4.5/include/linux/kmemleak.h
+++ /dev/null
@@ -1,106 +0,0 @@
-/*
- * include/linux/kmemleak.h
- *
- * Copyright (C) 2008 ARM Limited
- * Written by Catalin Marinas <catalin.marinas@arm.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#ifndef __KMEMLEAK_H
-#define __KMEMLEAK_H
-
-#ifdef CONFIG_DEBUG_KMEMLEAK
-
-extern void kmemleak_init(void) __ref;
-extern void kmemleak_alloc(const void *ptr, size_t size, int min_count,
-			   gfp_t gfp) __ref;
-extern void kmemleak_alloc_percpu(const void __percpu *ptr, size_t size) __ref;
-extern void kmemleak_free(const void *ptr) __ref;
-extern void kmemleak_free_part(const void *ptr, size_t size) __ref;
-extern void kmemleak_free_percpu(const void __percpu *ptr) __ref;
-extern void kmemleak_padding(const void *ptr, unsigned long offset,
-			     size_t size) __ref;
-extern void kmemleak_not_leak(const void *ptr) __ref;
-extern void kmemleak_ignore(const void *ptr) __ref;
-extern void kmemleak_scan_area(const void *ptr, size_t size, gfp_t gfp) __ref;
-extern void kmemleak_no_scan(const void *ptr) __ref;
-
-static inline void kmemleak_alloc_recursive(const void *ptr, size_t size,
-					    int min_count, unsigned long flags,
-					    gfp_t gfp)
-{
-	if (!(flags & SLAB_NOLEAKTRACE))
-		kmemleak_alloc(ptr, size, min_count, gfp);
-}
-
-static inline void kmemleak_free_recursive(const void *ptr, unsigned long flags)
-{
-	if (!(flags & SLAB_NOLEAKTRACE))
-		kmemleak_free(ptr);
-}
-
-static inline void kmemleak_erase(void **ptr)
-{
-	*ptr = NULL;
-}
-
-#else
-
-static inline void kmemleak_init(void)
-{
-}
-static inline void kmemleak_alloc(const void *ptr, size_t size, int min_count,
-				  gfp_t gfp)
-{
-}
-static inline void kmemleak_alloc_recursive(const void *ptr, size_t size,
-					    int min_count, unsigned long flags,
-					    gfp_t gfp)
-{
-}
-static inline void kmemleak_alloc_percpu(const void __percpu *ptr, size_t size)
-{
-}
-static inline void kmemleak_free(const void *ptr)
-{
-}
-static inline void kmemleak_free_part(const void *ptr, size_t size)
-{
-}
-static inline void kmemleak_free_recursive(const void *ptr, unsigned long flags)
-{
-}
-static inline void kmemleak_free_percpu(const void __percpu *ptr)
-{
-}
-static inline void kmemleak_not_leak(const void *ptr)
-{
-}
-static inline void kmemleak_ignore(const void *ptr)
-{
-}
-static inline void kmemleak_scan_area(const void *ptr, size_t size, gfp_t gfp)
-{
-}
-static inline void kmemleak_erase(void **ptr)
-{
-}
-static inline void kmemleak_no_scan(const void *ptr)
-{
-}
-
-#endif	/* CONFIG_DEBUG_KMEMLEAK */
-
-#endif	/* __KMEMLEAK_H */
diff --git a/ANDROID_3.4.5/include/linux/kmod.h b/ANDROID_3.4.5/include/linux/kmod.h
deleted file mode 100644
index dd99c329..00000000
--- a/ANDROID_3.4.5/include/linux/kmod.h
+++ /dev/null
@@ -1,138 +0,0 @@
-#ifndef __LINUX_KMOD_H__
-#define __LINUX_KMOD_H__
-
-/*
- *	include/linux/kmod.h
- *
- *      This program is free software; you can redistribute it and/or modify
- *      it under the terms of the GNU General Public License as published by
- *      the Free Software Foundation; either version 2 of the License, or
- *      (at your option) any later version.
- *
- *      This program is distributed in the hope that it will be useful,
- *      but WITHOUT ANY WARRANTY; without even the implied warranty of
- *      MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *      GNU General Public License for more details.
- *
- *      You should have received a copy of the GNU General Public License
- *      along with this program; if not, write to the Free Software
- *      Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/gfp.h>
-#include <linux/stddef.h>
-#include <linux/errno.h>
-#include <linux/compiler.h>
-#include <linux/workqueue.h>
-#include <linux/sysctl.h>
-
-#define KMOD_PATH_LEN 256
-
-#ifdef CONFIG_MODULES
-extern char modprobe_path[]; /* for sysctl */
-/* modprobe exit status on success, -ve on error.  Return value
- * usually useless though. */
-extern __printf(2, 3)
-int __request_module(bool wait, const char *name, ...);
-#define request_module(mod...) __request_module(true, mod)
-#define request_module_nowait(mod...) __request_module(false, mod)
-#define try_then_request_module(x, mod...) \
-	((x) ?: (__request_module(true, mod), (x)))
-#else
-static inline int request_module(const char *name, ...) { return -ENOSYS; }
-static inline int request_module_nowait(const char *name, ...) { return -ENOSYS; }
-#define try_then_request_module(x, mod...) (x)
-#endif
-
-
-struct cred;
-struct file;
-
-#define UMH_NO_WAIT	0	/* don't wait at all */
-#define UMH_WAIT_EXEC	1	/* wait for the exec, but not the process */
-#define UMH_WAIT_PROC	2	/* wait for the process to complete */
-#define UMH_KILLABLE	4	/* wait for EXEC/PROC killable */
-
-struct subprocess_info {
-	struct work_struct work;
-	struct completion *complete;
-	char *path;
-	char **argv;
-	char **envp;
-	int wait;
-	int retval;
-	int (*init)(struct subprocess_info *info, struct cred *new);
-	void (*cleanup)(struct subprocess_info *info);
-	void *data;
-};
-
-/* Allocate a subprocess_info structure */
-struct subprocess_info *call_usermodehelper_setup(char *path, char **argv,
-						  char **envp, gfp_t gfp_mask);
-
-/* Set various pieces of state into the subprocess_info structure */
-void call_usermodehelper_setfns(struct subprocess_info *info,
-		    int (*init)(struct subprocess_info *info, struct cred *new),
-		    void (*cleanup)(struct subprocess_info *info),
-		    void *data);
-
-/* Actually execute the sub-process */
-int call_usermodehelper_exec(struct subprocess_info *info, int wait);
-
-/* Free the subprocess_info. This is only needed if you're not going
-   to call call_usermodehelper_exec */
-void call_usermodehelper_freeinfo(struct subprocess_info *info);
-
-static inline int
-call_usermodehelper_fns(char *path, char **argv, char **envp, int wait,
-			int (*init)(struct subprocess_info *info, struct cred *new),
-			void (*cleanup)(struct subprocess_info *), void *data)
-{
-	struct subprocess_info *info;
-	gfp_t gfp_mask = (wait == UMH_NO_WAIT) ? GFP_ATOMIC : GFP_KERNEL;
-
-	info = call_usermodehelper_setup(path, argv, envp, gfp_mask);
-
-	if (info == NULL)
-		return -ENOMEM;
-
-	call_usermodehelper_setfns(info, init, cleanup, data);
-
-	return call_usermodehelper_exec(info, wait);
-}
-
-static inline int
-call_usermodehelper(char *path, char **argv, char **envp, int wait)
-{
-	return call_usermodehelper_fns(path, argv, envp, wait,
-				       NULL, NULL, NULL);
-}
-
-extern struct ctl_table usermodehelper_table[];
-
-enum umh_disable_depth {
-	UMH_ENABLED = 0,
-	UMH_FREEZING,
-	UMH_DISABLED,
-};
-
-extern void usermodehelper_init(void);
-
-extern int __usermodehelper_disable(enum umh_disable_depth depth);
-extern void __usermodehelper_set_disable_depth(enum umh_disable_depth depth);
-
-static inline int usermodehelper_disable(void)
-{
-	return __usermodehelper_disable(UMH_DISABLED);
-}
-
-static inline void usermodehelper_enable(void)
-{
-	__usermodehelper_set_disable_depth(UMH_ENABLED);
-}
-
-extern int usermodehelper_read_trylock(void);
-extern long usermodehelper_read_lock_wait(long timeout);
-extern void usermodehelper_read_unlock(void);
-
-#endif /* __LINUX_KMOD_H__ */
diff --git a/ANDROID_3.4.5/include/linux/kmsg_dump.h b/ANDROID_3.4.5/include/linux/kmsg_dump.h
deleted file mode 100644
index 35f7237e..00000000
--- a/ANDROID_3.4.5/include/linux/kmsg_dump.h
+++ /dev/null
@@ -1,70 +0,0 @@
-/*
- * linux/include/kmsg_dump.h
- *
- * Copyright (C) 2009 Net Insight AB
- *
- * Author: Simon Kagstrom <simon.kagstrom@netinsight.net>
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file COPYING in the main directory of this archive
- * for more details.
- */
-#ifndef _LINUX_KMSG_DUMP_H
-#define _LINUX_KMSG_DUMP_H
-
-#include <linux/errno.h>
-#include <linux/list.h>
-
-/*
- * Keep this list arranged in rough order of priority. Anything listed after
- * KMSG_DUMP_OOPS will not be logged by default unless printk.always_kmsg_dump
- * is passed to the kernel.
- */
-enum kmsg_dump_reason {
-	KMSG_DUMP_PANIC,
-	KMSG_DUMP_OOPS,
-	KMSG_DUMP_EMERG,
-	KMSG_DUMP_RESTART,
-	KMSG_DUMP_HALT,
-	KMSG_DUMP_POWEROFF,
-};
-
-/**
- * struct kmsg_dumper - kernel crash message dumper structure
- * @dump:	The callback which gets called on crashes. The buffer is passed
- * 		as two sections, where s1 (length l1) contains the older
- * 		messages and s2 (length l2) contains the newer.
- * @list:	Entry in the dumper list (private)
- * @registered:	Flag that specifies if this is already registered
- */
-struct kmsg_dumper {
-	void (*dump)(struct kmsg_dumper *dumper, enum kmsg_dump_reason reason,
-			const char *s1, unsigned long l1,
-			const char *s2, unsigned long l2);
-	struct list_head list;
-	int registered;
-};
-
-#ifdef CONFIG_PRINTK
-void kmsg_dump(enum kmsg_dump_reason reason);
-
-int kmsg_dump_register(struct kmsg_dumper *dumper);
-
-int kmsg_dump_unregister(struct kmsg_dumper *dumper);
-#else
-static inline void kmsg_dump(enum kmsg_dump_reason reason)
-{
-}
-
-static inline int kmsg_dump_register(struct kmsg_dumper *dumper)
-{
-	return -EINVAL;
-}
-
-static inline int kmsg_dump_unregister(struct kmsg_dumper *dumper)
-{
-	return -EINVAL;
-}
-#endif
-
-#endif /* _LINUX_KMSG_DUMP_H */
diff --git a/ANDROID_3.4.5/include/linux/kobj_map.h b/ANDROID_3.4.5/include/linux/kobj_map.h
deleted file mode 100644
index 18ca75ff..00000000
--- a/ANDROID_3.4.5/include/linux/kobj_map.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * kobj_map.h
- */
-
-#ifndef _KOBJ_MAP_H_
-#define _KOBJ_MAP_H_
-
-#include <linux/mutex.h>
-
-typedef struct kobject *kobj_probe_t(dev_t, int *, void *);
-struct kobj_map;
-
-int kobj_map(struct kobj_map *, dev_t, unsigned long, struct module *,
-	     kobj_probe_t *, int (*)(dev_t, void *), void *);
-void kobj_unmap(struct kobj_map *, dev_t, unsigned long);
-struct kobject *kobj_lookup(struct kobj_map *, dev_t, int *);
-struct kobj_map *kobj_map_init(kobj_probe_t *, struct mutex *);
-
-#endif /* _KOBJ_MAP_H_ */
diff --git a/ANDROID_3.4.5/include/linux/kobject.h b/ANDROID_3.4.5/include/linux/kobject.h
deleted file mode 100644
index fc615a97..00000000
--- a/ANDROID_3.4.5/include/linux/kobject.h
+++ /dev/null
@@ -1,234 +0,0 @@
-/*
- * kobject.h - generic kernel object infrastructure.
- *
- * Copyright (c) 2002-2003 Patrick Mochel
- * Copyright (c) 2002-2003 Open Source Development Labs
- * Copyright (c) 2006-2008 Greg Kroah-Hartman <greg@kroah.com>
- * Copyright (c) 2006-2008 Novell Inc.
- *
- * This file is released under the GPLv2.
- *
- * Please read Documentation/kobject.txt before using the kobject
- * interface, ESPECIALLY the parts about reference counts and object
- * destructors.
- */
-
-#ifndef _KOBJECT_H_
-#define _KOBJECT_H_
-
-#include <linux/types.h>
-#include <linux/list.h>
-#include <linux/sysfs.h>
-#include <linux/compiler.h>
-#include <linux/spinlock.h>
-#include <linux/kref.h>
-#include <linux/kobject_ns.h>
-#include <linux/kernel.h>
-#include <linux/wait.h>
-#include <linux/atomic.h>
-
-#define UEVENT_HELPER_PATH_LEN		256
-#define UEVENT_NUM_ENVP			32	/* number of env pointers */
-#define UEVENT_BUFFER_SIZE		2048	/* buffer for the variables */
-
-/* path to the userspace helper executed on an event */
-extern char uevent_helper[];
-
-/* counter to tag the uevent, read only except for the kobject core */
-extern u64 uevent_seqnum;
-
-/*
- * The actions here must match the index to the string array
- * in lib/kobject_uevent.c
- *
- * Do not add new actions here without checking with the driver-core
- * maintainers. Action strings are not meant to express subsystem
- * or device specific properties. In most cases you want to send a
- * kobject_uevent_env(kobj, KOBJ_CHANGE, env) with additional event
- * specific variables added to the event environment.
- */
-enum kobject_action {
-	KOBJ_ADD,
-	KOBJ_REMOVE,
-	KOBJ_CHANGE,
-	KOBJ_MOVE,
-	KOBJ_ONLINE,
-	KOBJ_OFFLINE,
-	KOBJ_MAX
-};
-
-struct kobject {
-	const char		*name;
-	struct list_head	entry;
-	struct kobject		*parent;
-	struct kset		*kset;
-	struct kobj_type	*ktype;
-	struct sysfs_dirent	*sd;
-	struct kref		kref;
-	unsigned int state_initialized:1;
-	unsigned int state_in_sysfs:1;
-	unsigned int state_add_uevent_sent:1;
-	unsigned int state_remove_uevent_sent:1;
-	unsigned int uevent_suppress:1;
-};
-
-extern __printf(2, 3)
-int kobject_set_name(struct kobject *kobj, const char *name, ...);
-extern int kobject_set_name_vargs(struct kobject *kobj, const char *fmt,
-				  va_list vargs);
-
-static inline const char *kobject_name(const struct kobject *kobj)
-{
-	return kobj->name;
-}
-
-extern void kobject_init(struct kobject *kobj, struct kobj_type *ktype);
-extern __printf(3, 4) __must_check
-int kobject_add(struct kobject *kobj, struct kobject *parent,
-		const char *fmt, ...);
-extern __printf(4, 5) __must_check
-int kobject_init_and_add(struct kobject *kobj,
-			 struct kobj_type *ktype, struct kobject *parent,
-			 const char *fmt, ...);
-
-extern void kobject_del(struct kobject *kobj);
-
-extern struct kobject * __must_check kobject_create(void);
-extern struct kobject * __must_check kobject_create_and_add(const char *name,
-						struct kobject *parent);
-
-extern int __must_check kobject_rename(struct kobject *, const char *new_name);
-extern int __must_check kobject_move(struct kobject *, struct kobject *);
-
-extern struct kobject *kobject_get(struct kobject *kobj);
-extern void kobject_put(struct kobject *kobj);
-
-extern char *kobject_get_path(struct kobject *kobj, gfp_t flag);
-
-struct kobj_type {
-	void (*release)(struct kobject *kobj);
-	const struct sysfs_ops *sysfs_ops;
-	struct attribute **default_attrs;
-	const struct kobj_ns_type_operations *(*child_ns_type)(struct kobject *kobj);
-	const void *(*namespace)(struct kobject *kobj);
-};
-
-struct kobj_uevent_env {
-	char *envp[UEVENT_NUM_ENVP];
-	int envp_idx;
-	char buf[UEVENT_BUFFER_SIZE];
-	int buflen;
-};
-
-struct kset_uevent_ops {
-	int (* const filter)(struct kset *kset, struct kobject *kobj);
-	const char *(* const name)(struct kset *kset, struct kobject *kobj);
-	int (* const uevent)(struct kset *kset, struct kobject *kobj,
-		      struct kobj_uevent_env *env);
-};
-
-struct kobj_attribute {
-	struct attribute attr;
-	ssize_t (*show)(struct kobject *kobj, struct kobj_attribute *attr,
-			char *buf);
-	ssize_t (*store)(struct kobject *kobj, struct kobj_attribute *attr,
-			 const char *buf, size_t count);
-};
-
-extern const struct sysfs_ops kobj_sysfs_ops;
-
-struct sock;
-
-/**
- * struct kset - a set of kobjects of a specific type, belonging to a specific subsystem.
- *
- * A kset defines a group of kobjects.  They can be individually
- * different "types" but overall these kobjects all want to be grouped
- * together and operated on in the same manner.  ksets are used to
- * define the attribute callbacks and other common events that happen to
- * a kobject.
- *
- * @list: the list of all kobjects for this kset
- * @list_lock: a lock for iterating over the kobjects
- * @kobj: the embedded kobject for this kset (recursion, isn't it fun...)
- * @uevent_ops: the set of uevent operations for this kset.  These are
- * called whenever a kobject has something happen to it so that the kset
- * can add new environment variables, or filter out the uevents if so
- * desired.
- */
-struct kset {
-	struct list_head list;
-	spinlock_t list_lock;
-	struct kobject kobj;
-	const struct kset_uevent_ops *uevent_ops;
-};
-
-extern void kset_init(struct kset *kset);
-extern int __must_check kset_register(struct kset *kset);
-extern void kset_unregister(struct kset *kset);
-extern struct kset * __must_check kset_create_and_add(const char *name,
-						const struct kset_uevent_ops *u,
-						struct kobject *parent_kobj);
-
-static inline struct kset *to_kset(struct kobject *kobj)
-{
-	return kobj ? container_of(kobj, struct kset, kobj) : NULL;
-}
-
-static inline struct kset *kset_get(struct kset *k)
-{
-	return k ? to_kset(kobject_get(&k->kobj)) : NULL;
-}
-
-static inline void kset_put(struct kset *k)
-{
-	kobject_put(&k->kobj);
-}
-
-static inline struct kobj_type *get_ktype(struct kobject *kobj)
-{
-	return kobj->ktype;
-}
-
-extern struct kobject *kset_find_obj(struct kset *, const char *);
-
-/* The global /sys/kernel/ kobject for people to chain off of */
-extern struct kobject *kernel_kobj;
-/* The global /sys/kernel/mm/ kobject for people to chain off of */
-extern struct kobject *mm_kobj;
-/* The global /sys/hypervisor/ kobject for people to chain off of */
-extern struct kobject *hypervisor_kobj;
-/* The global /sys/power/ kobject for people to chain off of */
-extern struct kobject *power_kobj;
-/* The global /sys/firmware/ kobject for people to chain off of */
-extern struct kobject *firmware_kobj;
-
-#if defined(CONFIG_HOTPLUG)
-int kobject_uevent(struct kobject *kobj, enum kobject_action action);
-int kobject_uevent_env(struct kobject *kobj, enum kobject_action action,
-			char *envp[]);
-
-__printf(2, 3)
-int add_uevent_var(struct kobj_uevent_env *env, const char *format, ...);
-
-int kobject_action_type(const char *buf, size_t count,
-			enum kobject_action *type);
-#else
-static inline int kobject_uevent(struct kobject *kobj,
-				 enum kobject_action action)
-{ return 0; }
-static inline int kobject_uevent_env(struct kobject *kobj,
-				      enum kobject_action action,
-				      char *envp[])
-{ return 0; }
-
-static inline __printf(2, 3)
-int add_uevent_var(struct kobj_uevent_env *env, const char *format, ...)
-{ return 0; }
-
-static inline int kobject_action_type(const char *buf, size_t count,
-				      enum kobject_action *type)
-{ return -EINVAL; }
-#endif
-
-#endif /* _KOBJECT_H_ */
diff --git a/ANDROID_3.4.5/include/linux/kobject_ns.h b/ANDROID_3.4.5/include/linux/kobject_ns.h
deleted file mode 100644
index f66b065a..00000000
--- a/ANDROID_3.4.5/include/linux/kobject_ns.h
+++ /dev/null
@@ -1,58 +0,0 @@
-/* Kernel object name space definitions
- *
- * Copyright (c) 2002-2003 Patrick Mochel
- * Copyright (c) 2002-2003 Open Source Development Labs
- * Copyright (c) 2006-2008 Greg Kroah-Hartman <greg@kroah.com>
- * Copyright (c) 2006-2008 Novell Inc.
- *
- * Split from kobject.h by David Howells (dhowells@redhat.com)
- *
- * This file is released under the GPLv2.
- *
- * Please read Documentation/kobject.txt before using the kobject
- * interface, ESPECIALLY the parts about reference counts and object
- * destructors.
- */
-
-#ifndef _LINUX_KOBJECT_NS_H
-#define _LINUX_KOBJECT_NS_H
-
-struct sock;
-struct kobject;
-
-/*
- * Namespace types which are used to tag kobjects and sysfs entries.
- * Network namespace will likely be the first.
- */
-enum kobj_ns_type {
-	KOBJ_NS_TYPE_NONE = 0,
-	KOBJ_NS_TYPE_NET,
-	KOBJ_NS_TYPES
-};
-
-/*
- * Callbacks so sysfs can determine namespaces
- *   @grab_current_ns: return a new reference to calling task's namespace
- *   @netlink_ns: return namespace to which a sock belongs (right?)
- *   @initial_ns: return the initial namespace (i.e. init_net_ns)
- *   @drop_ns: drops a reference to namespace
- */
-struct kobj_ns_type_operations {
-	enum kobj_ns_type type;
-	void *(*grab_current_ns)(void);
-	const void *(*netlink_ns)(struct sock *sk);
-	const void *(*initial_ns)(void);
-	void (*drop_ns)(void *);
-};
-
-int kobj_ns_type_register(const struct kobj_ns_type_operations *ops);
-int kobj_ns_type_registered(enum kobj_ns_type type);
-const struct kobj_ns_type_operations *kobj_child_ns_ops(struct kobject *parent);
-const struct kobj_ns_type_operations *kobj_ns_ops(struct kobject *kobj);
-
-void *kobj_ns_grab_current(enum kobj_ns_type type);
-const void *kobj_ns_netlink(enum kobj_ns_type type, struct sock *sk);
-const void *kobj_ns_initial(enum kobj_ns_type type);
-void kobj_ns_drop(enum kobj_ns_type type, void *ns);
-
-#endif /* _LINUX_KOBJECT_NS_H */
diff --git a/ANDROID_3.4.5/include/linux/kprobes.h b/ANDROID_3.4.5/include/linux/kprobes.h
deleted file mode 100644
index b6e1f8c0..00000000
--- a/ANDROID_3.4.5/include/linux/kprobes.h
+++ /dev/null
@@ -1,440 +0,0 @@
-#ifndef _LINUX_KPROBES_H
-#define _LINUX_KPROBES_H
-/*
- *  Kernel Probes (KProbes)
- *  include/linux/kprobes.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- *
- * Copyright (C) IBM Corporation, 2002, 2004
- *
- * 2002-Oct	Created by Vamsi Krishna S <vamsi_krishna@in.ibm.com> Kernel
- *		Probes initial implementation ( includes suggestions from
- *		Rusty Russell).
- * 2004-July	Suparna Bhattacharya <suparna@in.ibm.com> added jumper probes
- *		interface to access function arguments.
- * 2005-May	Hien Nguyen <hien@us.ibm.com> and Jim Keniston
- *		<jkenisto@us.ibm.com>  and Prasanna S Panchamukhi
- *		<prasanna@in.ibm.com> added function-return probes.
- */
-#include <linux/linkage.h>
-#include <linux/list.h>
-#include <linux/notifier.h>
-#include <linux/smp.h>
-#include <linux/bug.h>
-#include <linux/percpu.h>
-#include <linux/spinlock.h>
-#include <linux/rcupdate.h>
-#include <linux/mutex.h>
-
-#ifdef CONFIG_KPROBES
-#include <asm/kprobes.h>
-
-/* kprobe_status settings */
-#define KPROBE_HIT_ACTIVE	0x00000001
-#define KPROBE_HIT_SS		0x00000002
-#define KPROBE_REENTER		0x00000004
-#define KPROBE_HIT_SSDONE	0x00000008
-
-/* Attach to insert probes on any functions which should be ignored*/
-#define __kprobes	__attribute__((__section__(".kprobes.text")))
-#else /* CONFIG_KPROBES */
-typedef int kprobe_opcode_t;
-struct arch_specific_insn {
-	int dummy;
-};
-#define __kprobes
-#endif /* CONFIG_KPROBES */
-
-struct kprobe;
-struct pt_regs;
-struct kretprobe;
-struct kretprobe_instance;
-typedef int (*kprobe_pre_handler_t) (struct kprobe *, struct pt_regs *);
-typedef int (*kprobe_break_handler_t) (struct kprobe *, struct pt_regs *);
-typedef void (*kprobe_post_handler_t) (struct kprobe *, struct pt_regs *,
-				       unsigned long flags);
-typedef int (*kprobe_fault_handler_t) (struct kprobe *, struct pt_regs *,
-				       int trapnr);
-typedef int (*kretprobe_handler_t) (struct kretprobe_instance *,
-				    struct pt_regs *);
-
-struct kprobe {
-	struct hlist_node hlist;
-
-	/* list of kprobes for multi-handler support */
-	struct list_head list;
-
-	/*count the number of times this probe was temporarily disarmed */
-	unsigned long nmissed;
-
-	/* location of the probe point */
-	kprobe_opcode_t *addr;
-
-	/* Allow user to indicate symbol name of the probe point */
-	const char *symbol_name;
-
-	/* Offset into the symbol */
-	unsigned int offset;
-
-	/* Called before addr is executed. */
-	kprobe_pre_handler_t pre_handler;
-
-	/* Called after addr is executed, unless... */
-	kprobe_post_handler_t post_handler;
-
-	/*
-	 * ... called if executing addr causes a fault (eg. page fault).
-	 * Return 1 if it handled fault, otherwise kernel will see it.
-	 */
-	kprobe_fault_handler_t fault_handler;
-
-	/*
-	 * ... called if breakpoint trap occurs in probe handler.
-	 * Return 1 if it handled break, otherwise kernel will see it.
-	 */
-	kprobe_break_handler_t break_handler;
-
-	/* Saved opcode (which has been replaced with breakpoint) */
-	kprobe_opcode_t opcode;
-
-	/* copy of the original instruction */
-	struct arch_specific_insn ainsn;
-
-	/*
-	 * Indicates various status flags.
-	 * Protected by kprobe_mutex after this kprobe is registered.
-	 */
-	u32 flags;
-};
-
-/* Kprobe status flags */
-#define KPROBE_FLAG_GONE	1 /* breakpoint has already gone */
-#define KPROBE_FLAG_DISABLED	2 /* probe is temporarily disabled */
-#define KPROBE_FLAG_OPTIMIZED	4 /*
-				   * probe is really optimized.
-				   * NOTE:
-				   * this flag is only for optimized_kprobe.
-				   */
-
-/* Has this kprobe gone ? */
-static inline int kprobe_gone(struct kprobe *p)
-{
-	return p->flags & KPROBE_FLAG_GONE;
-}
-
-/* Is this kprobe disabled ? */
-static inline int kprobe_disabled(struct kprobe *p)
-{
-	return p->flags & (KPROBE_FLAG_DISABLED | KPROBE_FLAG_GONE);
-}
-
-/* Is this kprobe really running optimized path ? */
-static inline int kprobe_optimized(struct kprobe *p)
-{
-	return p->flags & KPROBE_FLAG_OPTIMIZED;
-}
-/*
- * Special probe type that uses setjmp-longjmp type tricks to resume
- * execution at a specified entry with a matching prototype corresponding
- * to the probed function - a trick to enable arguments to become
- * accessible seamlessly by probe handling logic.
- * Note:
- * Because of the way compilers allocate stack space for local variables
- * etc upfront, regardless of sub-scopes within a function, this mirroring
- * principle currently works only for probes placed on function entry points.
- */
-struct jprobe {
-	struct kprobe kp;
-	void *entry;	/* probe handling code to jump to */
-};
-
-/* For backward compatibility with old code using JPROBE_ENTRY() */
-#define JPROBE_ENTRY(handler)	(handler)
-
-/*
- * Function-return probe -
- * Note:
- * User needs to provide a handler function, and initialize maxactive.
- * maxactive - The maximum number of instances of the probed function that
- * can be active concurrently.
- * nmissed - tracks the number of times the probed function's return was
- * ignored, due to maxactive being too low.
- *
- */
-struct kretprobe {
-	struct kprobe kp;
-	kretprobe_handler_t handler;
-	kretprobe_handler_t entry_handler;
-	int maxactive;
-	int nmissed;
-	size_t data_size;
-	struct hlist_head free_instances;
-	raw_spinlock_t lock;
-};
-
-struct kretprobe_instance {
-	struct hlist_node hlist;
-	struct kretprobe *rp;
-	kprobe_opcode_t *ret_addr;
-	struct task_struct *task;
-	char data[0];
-};
-
-struct kretprobe_blackpoint {
-	const char *name;
-	void *addr;
-};
-
-struct kprobe_blackpoint {
-	const char *name;
-	unsigned long start_addr;
-	unsigned long range;
-};
-
-#ifdef CONFIG_KPROBES
-DECLARE_PER_CPU(struct kprobe *, current_kprobe);
-DECLARE_PER_CPU(struct kprobe_ctlblk, kprobe_ctlblk);
-
-/*
- * For #ifdef avoidance:
- */
-static inline int kprobes_built_in(void)
-{
-	return 1;
-}
-
-#ifdef CONFIG_KRETPROBES
-extern void arch_prepare_kretprobe(struct kretprobe_instance *ri,
-				   struct pt_regs *regs);
-extern int arch_trampoline_kprobe(struct kprobe *p);
-#else /* CONFIG_KRETPROBES */
-static inline void arch_prepare_kretprobe(struct kretprobe *rp,
-					struct pt_regs *regs)
-{
-}
-static inline int arch_trampoline_kprobe(struct kprobe *p)
-{
-	return 0;
-}
-#endif /* CONFIG_KRETPROBES */
-
-extern struct kretprobe_blackpoint kretprobe_blacklist[];
-
-static inline void kretprobe_assert(struct kretprobe_instance *ri,
-	unsigned long orig_ret_address, unsigned long trampoline_address)
-{
-	if (!orig_ret_address || (orig_ret_address == trampoline_address)) {
-		printk("kretprobe BUG!: Processing kretprobe %p @ %p\n",
-				ri->rp, ri->rp->kp.addr);
-		BUG();
-	}
-}
-
-#ifdef CONFIG_KPROBES_SANITY_TEST
-extern int init_test_probes(void);
-#else
-static inline int init_test_probes(void)
-{
-	return 0;
-}
-#endif /* CONFIG_KPROBES_SANITY_TEST */
-
-extern int arch_prepare_kprobe(struct kprobe *p);
-extern void arch_arm_kprobe(struct kprobe *p);
-extern void arch_disarm_kprobe(struct kprobe *p);
-extern int arch_init_kprobes(void);
-extern void show_registers(struct pt_regs *regs);
-extern kprobe_opcode_t *get_insn_slot(void);
-extern void free_insn_slot(kprobe_opcode_t *slot, int dirty);
-extern void kprobes_inc_nmissed_count(struct kprobe *p);
-
-#ifdef CONFIG_OPTPROBES
-/*
- * Internal structure for direct jump optimized probe
- */
-struct optimized_kprobe {
-	struct kprobe kp;
-	struct list_head list;	/* list for optimizing queue */
-	struct arch_optimized_insn optinsn;
-};
-
-/* Architecture dependent functions for direct jump optimization */
-extern int arch_prepared_optinsn(struct arch_optimized_insn *optinsn);
-extern int arch_check_optimized_kprobe(struct optimized_kprobe *op);
-extern int arch_prepare_optimized_kprobe(struct optimized_kprobe *op);
-extern void arch_remove_optimized_kprobe(struct optimized_kprobe *op);
-extern void arch_optimize_kprobes(struct list_head *oplist);
-extern void arch_unoptimize_kprobes(struct list_head *oplist,
-				    struct list_head *done_list);
-extern void arch_unoptimize_kprobe(struct optimized_kprobe *op);
-extern kprobe_opcode_t *get_optinsn_slot(void);
-extern void free_optinsn_slot(kprobe_opcode_t *slot, int dirty);
-extern int arch_within_optimized_kprobe(struct optimized_kprobe *op,
-					unsigned long addr);
-
-extern void opt_pre_handler(struct kprobe *p, struct pt_regs *regs);
-
-#ifdef CONFIG_SYSCTL
-extern int sysctl_kprobes_optimization;
-extern int proc_kprobes_optimization_handler(struct ctl_table *table,
-					     int write, void __user *buffer,
-					     size_t *length, loff_t *ppos);
-#endif
-
-#endif /* CONFIG_OPTPROBES */
-
-/* Get the kprobe at this addr (if any) - called with preemption disabled */
-struct kprobe *get_kprobe(void *addr);
-void kretprobe_hash_lock(struct task_struct *tsk,
-			 struct hlist_head **head, unsigned long *flags);
-void kretprobe_hash_unlock(struct task_struct *tsk, unsigned long *flags);
-struct hlist_head * kretprobe_inst_table_head(struct task_struct *tsk);
-
-/* kprobe_running() will just return the current_kprobe on this CPU */
-static inline struct kprobe *kprobe_running(void)
-{
-	return (__this_cpu_read(current_kprobe));
-}
-
-static inline void reset_current_kprobe(void)
-{
-	__this_cpu_write(current_kprobe, NULL);
-}
-
-static inline struct kprobe_ctlblk *get_kprobe_ctlblk(void)
-{
-	return (&__get_cpu_var(kprobe_ctlblk));
-}
-
-int register_kprobe(struct kprobe *p);
-void unregister_kprobe(struct kprobe *p);
-int register_kprobes(struct kprobe **kps, int num);
-void unregister_kprobes(struct kprobe **kps, int num);
-int setjmp_pre_handler(struct kprobe *, struct pt_regs *);
-int longjmp_break_handler(struct kprobe *, struct pt_regs *);
-int register_jprobe(struct jprobe *p);
-void unregister_jprobe(struct jprobe *p);
-int register_jprobes(struct jprobe **jps, int num);
-void unregister_jprobes(struct jprobe **jps, int num);
-void jprobe_return(void);
-unsigned long arch_deref_entry_point(void *);
-
-int register_kretprobe(struct kretprobe *rp);
-void unregister_kretprobe(struct kretprobe *rp);
-int register_kretprobes(struct kretprobe **rps, int num);
-void unregister_kretprobes(struct kretprobe **rps, int num);
-
-void kprobe_flush_task(struct task_struct *tk);
-void recycle_rp_inst(struct kretprobe_instance *ri, struct hlist_head *head);
-
-int disable_kprobe(struct kprobe *kp);
-int enable_kprobe(struct kprobe *kp);
-
-void dump_kprobe(struct kprobe *kp);
-
-#else /* !CONFIG_KPROBES: */
-
-static inline int kprobes_built_in(void)
-{
-	return 0;
-}
-static inline int kprobe_fault_handler(struct pt_regs *regs, int trapnr)
-{
-	return 0;
-}
-static inline struct kprobe *get_kprobe(void *addr)
-{
-	return NULL;
-}
-static inline struct kprobe *kprobe_running(void)
-{
-	return NULL;
-}
-static inline int register_kprobe(struct kprobe *p)
-{
-	return -ENOSYS;
-}
-static inline int register_kprobes(struct kprobe **kps, int num)
-{
-	return -ENOSYS;
-}
-static inline void unregister_kprobe(struct kprobe *p)
-{
-}
-static inline void unregister_kprobes(struct kprobe **kps, int num)
-{
-}
-static inline int register_jprobe(struct jprobe *p)
-{
-	return -ENOSYS;
-}
-static inline int register_jprobes(struct jprobe **jps, int num)
-{
-	return -ENOSYS;
-}
-static inline void unregister_jprobe(struct jprobe *p)
-{
-}
-static inline void unregister_jprobes(struct jprobe **jps, int num)
-{
-}
-static inline void jprobe_return(void)
-{
-}
-static inline int register_kretprobe(struct kretprobe *rp)
-{
-	return -ENOSYS;
-}
-static inline int register_kretprobes(struct kretprobe **rps, int num)
-{
-	return -ENOSYS;
-}
-static inline void unregister_kretprobe(struct kretprobe *rp)
-{
-}
-static inline void unregister_kretprobes(struct kretprobe **rps, int num)
-{
-}
-static inline void kprobe_flush_task(struct task_struct *tk)
-{
-}
-static inline int disable_kprobe(struct kprobe *kp)
-{
-	return -ENOSYS;
-}
-static inline int enable_kprobe(struct kprobe *kp)
-{
-	return -ENOSYS;
-}
-#endif /* CONFIG_KPROBES */
-static inline int disable_kretprobe(struct kretprobe *rp)
-{
-	return disable_kprobe(&rp->kp);
-}
-static inline int enable_kretprobe(struct kretprobe *rp)
-{
-	return enable_kprobe(&rp->kp);
-}
-static inline int disable_jprobe(struct jprobe *jp)
-{
-	return disable_kprobe(&jp->kp);
-}
-static inline int enable_jprobe(struct jprobe *jp)
-{
-	return enable_kprobe(&jp->kp);
-}
-
-#endif /* _LINUX_KPROBES_H */
diff --git a/ANDROID_3.4.5/include/linux/kref.h b/ANDROID_3.4.5/include/linux/kref.h
deleted file mode 100644
index 9c07dceb..00000000
--- a/ANDROID_3.4.5/include/linux/kref.h
+++ /dev/null
@@ -1,96 +0,0 @@
-/*
- * kref.h - library routines for handling generic reference counted objects
- *
- * Copyright (C) 2004 Greg Kroah-Hartman <greg@kroah.com>
- * Copyright (C) 2004 IBM Corp.
- *
- * based on kobject.h which was:
- * Copyright (C) 2002-2003 Patrick Mochel <mochel@osdl.org>
- * Copyright (C) 2002-2003 Open Source Development Labs
- *
- * This file is released under the GPLv2.
- *
- */
-
-#ifndef _KREF_H_
-#define _KREF_H_
-
-#include <linux/bug.h>
-#include <linux/atomic.h>
-#include <linux/kernel.h>
-
-struct kref {
-	atomic_t refcount;
-};
-
-/**
- * kref_init - initialize object.
- * @kref: object in question.
- */
-static inline void kref_init(struct kref *kref)
-{
-	atomic_set(&kref->refcount, 1);
-}
-
-/**
- * kref_get - increment refcount for object.
- * @kref: object.
- */
-static inline void kref_get(struct kref *kref)
-{
-	WARN_ON(!atomic_read(&kref->refcount));
-	atomic_inc(&kref->refcount);
-}
-
-/**
- * kref_sub - subtract a number of refcounts for object.
- * @kref: object.
- * @count: Number of recounts to subtract.
- * @release: pointer to the function that will clean up the object when the
- *	     last reference to the object is released.
- *	     This pointer is required, and it is not acceptable to pass kfree
- *	     in as this function.  If the caller does pass kfree to this
- *	     function, you will be publicly mocked mercilessly by the kref
- *	     maintainer, and anyone else who happens to notice it.  You have
- *	     been warned.
- *
- * Subtract @count from the refcount, and if 0, call release().
- * Return 1 if the object was removed, otherwise return 0.  Beware, if this
- * function returns 0, you still can not count on the kref from remaining in
- * memory.  Only use the return value if you want to see if the kref is now
- * gone, not present.
- */
-static inline int kref_sub(struct kref *kref, unsigned int count,
-	     void (*release)(struct kref *kref))
-{
-	WARN_ON(release == NULL);
-
-	if (atomic_sub_and_test((int) count, &kref->refcount)) {
-		release(kref);
-		return 1;
-	}
-	return 0;
-}
-
-/**
- * kref_put - decrement refcount for object.
- * @kref: object.
- * @release: pointer to the function that will clean up the object when the
- *	     last reference to the object is released.
- *	     This pointer is required, and it is not acceptable to pass kfree
- *	     in as this function.  If the caller does pass kfree to this
- *	     function, you will be publicly mocked mercilessly by the kref
- *	     maintainer, and anyone else who happens to notice it.  You have
- *	     been warned.
- *
- * Decrement the refcount, and if 0, call release().
- * Return 1 if the object was removed, otherwise return 0.  Beware, if this
- * function returns 0, you still can not count on the kref from remaining in
- * memory.  Only use the return value if you want to see if the kref is now
- * gone, not present.
- */
-static inline int kref_put(struct kref *kref, void (*release)(struct kref *kref))
-{
-	return kref_sub(kref, 1, release);
-}
-#endif /* _KREF_H_ */
diff --git a/ANDROID_3.4.5/include/linux/ks0108.h b/ANDROID_3.4.5/include/linux/ks0108.h
deleted file mode 100644
index cb311798..00000000
--- a/ANDROID_3.4.5/include/linux/ks0108.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- *    Filename: ks0108.h
- *     Version: 0.1.0
- * Description: ks0108 LCD Controller driver header
- *     License: GPLv2
- *
- *      Author: Copyright (C) Miguel Ojeda Sandonis
- *        Date: 2006-10-31
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- */
-
-#ifndef _KS0108_H_
-#define _KS0108_H_
-
-/* Write a byte to the data port */
-extern void ks0108_writedata(unsigned char byte);
-
-/* Write a byte to the control port */
-extern void ks0108_writecontrol(unsigned char byte);
-
-/* Set the controller's current display state (0..1) */
-extern void ks0108_displaystate(unsigned char state);
-
-/* Set the controller's current startline (0..63) */
-extern void ks0108_startline(unsigned char startline);
-
-/* Set the controller's current address (0..63) */
-extern void ks0108_address(unsigned char address);
-
-/* Set the controller's current page (0..7) */
-extern void ks0108_page(unsigned char page);
-
-/* Is the module inited? */
-extern unsigned char ks0108_isinited(void);
-
-#endif /* _KS0108_H_ */
diff --git a/ANDROID_3.4.5/include/linux/ks8842.h b/ANDROID_3.4.5/include/linux/ks8842.h
deleted file mode 100644
index 14ba4452..00000000
--- a/ANDROID_3.4.5/include/linux/ks8842.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- * ks8842.h KS8842 platform data struct definition
- * Copyright (c) 2010 Intel Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef _LINUX_KS8842_H
-#define _LINUX_KS8842_H
-
-#include <linux/if_ether.h>
-
-/**
- * struct ks8842_platform_data - Platform data of the KS8842 network driver
- * @macaddr:	The MAC address of the device, set to all 0:s to use the on in
- *		the chip.
- * @rx_dma_channel:	The DMA channel to use for RX, -1 for none.
- * @tx_dma_channel:	The DMA channel to use for TX, -1 for none.
- *
- */
-struct ks8842_platform_data {
-	u8 macaddr[ETH_ALEN];
-	int rx_dma_channel;
-	int tx_dma_channel;
-};
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/ksm.h b/ANDROID_3.4.5/include/linux/ksm.h
deleted file mode 100644
index 3319a696..00000000
--- a/ANDROID_3.4.5/include/linux/ksm.h
+++ /dev/null
@@ -1,145 +0,0 @@
-#ifndef __LINUX_KSM_H
-#define __LINUX_KSM_H
-/*
- * Memory merging support.
- *
- * This code enables dynamic sharing of identical pages found in different
- * memory areas, even if they are not shared by fork().
- */
-
-#include <linux/bitops.h>
-#include <linux/mm.h>
-#include <linux/pagemap.h>
-#include <linux/rmap.h>
-#include <linux/sched.h>
-
-struct stable_node;
-struct mem_cgroup;
-
-struct page *ksm_does_need_to_copy(struct page *page,
-			struct vm_area_struct *vma, unsigned long address);
-
-#ifdef CONFIG_KSM
-int ksm_madvise(struct vm_area_struct *vma, unsigned long start,
-		unsigned long end, int advice, unsigned long *vm_flags);
-int __ksm_enter(struct mm_struct *mm);
-void __ksm_exit(struct mm_struct *mm);
-
-static inline int ksm_fork(struct mm_struct *mm, struct mm_struct *oldmm)
-{
-	if (test_bit(MMF_VM_MERGEABLE, &oldmm->flags))
-		return __ksm_enter(mm);
-	return 0;
-}
-
-static inline void ksm_exit(struct mm_struct *mm)
-{
-	if (test_bit(MMF_VM_MERGEABLE, &mm->flags))
-		__ksm_exit(mm);
-}
-
-/*
- * A KSM page is one of those write-protected "shared pages" or "merged pages"
- * which KSM maps into multiple mms, wherever identical anonymous page content
- * is found in VM_MERGEABLE vmas.  It's a PageAnon page, pointing not to any
- * anon_vma, but to that page's node of the stable tree.
- */
-static inline int PageKsm(struct page *page)
-{
-	return ((unsigned long)page->mapping & PAGE_MAPPING_FLAGS) ==
-				(PAGE_MAPPING_ANON | PAGE_MAPPING_KSM);
-}
-
-static inline struct stable_node *page_stable_node(struct page *page)
-{
-	return PageKsm(page) ? page_rmapping(page) : NULL;
-}
-
-static inline void set_page_stable_node(struct page *page,
-					struct stable_node *stable_node)
-{
-	page->mapping = (void *)stable_node +
-				(PAGE_MAPPING_ANON | PAGE_MAPPING_KSM);
-}
-
-/*
- * When do_swap_page() first faults in from swap what used to be a KSM page,
- * no problem, it will be assigned to this vma's anon_vma; but thereafter,
- * it might be faulted into a different anon_vma (or perhaps to a different
- * offset in the same anon_vma).  do_swap_page() cannot do all the locking
- * needed to reconstitute a cross-anon_vma KSM page: for now it has to make
- * a copy, and leave remerging the pages to a later pass of ksmd.
- *
- * We'd like to make this conditional on vma->vm_flags & VM_MERGEABLE,
- * but what if the vma was unmerged while the page was swapped out?
- */
-static inline int ksm_might_need_to_copy(struct page *page,
-			struct vm_area_struct *vma, unsigned long address)
-{
-	struct anon_vma *anon_vma = page_anon_vma(page);
-
-	return anon_vma &&
-		(anon_vma->root != vma->anon_vma->root ||
-		 page->index != linear_page_index(vma, address));
-}
-
-int page_referenced_ksm(struct page *page,
-			struct mem_cgroup *memcg, unsigned long *vm_flags);
-int try_to_unmap_ksm(struct page *page, enum ttu_flags flags);
-int rmap_walk_ksm(struct page *page, int (*rmap_one)(struct page *,
-		  struct vm_area_struct *, unsigned long, void *), void *arg);
-void ksm_migrate_page(struct page *newpage, struct page *oldpage);
-
-#else  /* !CONFIG_KSM */
-
-static inline int ksm_fork(struct mm_struct *mm, struct mm_struct *oldmm)
-{
-	return 0;
-}
-
-static inline void ksm_exit(struct mm_struct *mm)
-{
-}
-
-static inline int PageKsm(struct page *page)
-{
-	return 0;
-}
-
-#ifdef CONFIG_MMU
-static inline int ksm_madvise(struct vm_area_struct *vma, unsigned long start,
-		unsigned long end, int advice, unsigned long *vm_flags)
-{
-	return 0;
-}
-
-static inline int ksm_might_need_to_copy(struct page *page,
-			struct vm_area_struct *vma, unsigned long address)
-{
-	return 0;
-}
-
-static inline int page_referenced_ksm(struct page *page,
-			struct mem_cgroup *memcg, unsigned long *vm_flags)
-{
-	return 0;
-}
-
-static inline int try_to_unmap_ksm(struct page *page, enum ttu_flags flags)
-{
-	return 0;
-}
-
-static inline int rmap_walk_ksm(struct page *page, int (*rmap_one)(struct page*,
-		struct vm_area_struct *, unsigned long, void *), void *arg)
-{
-	return 0;
-}
-
-static inline void ksm_migrate_page(struct page *newpage, struct page *oldpage)
-{
-}
-#endif /* CONFIG_MMU */
-#endif /* !CONFIG_KSM */
-
-#endif /* __LINUX_KSM_H */
diff --git a/ANDROID_3.4.5/include/linux/kthread.h b/ANDROID_3.4.5/include/linux/kthread.h
deleted file mode 100644
index 22ccf9de..00000000
--- a/ANDROID_3.4.5/include/linux/kthread.h
+++ /dev/null
@@ -1,130 +0,0 @@
-#ifndef _LINUX_KTHREAD_H
-#define _LINUX_KTHREAD_H
-/* Simple interface for creating and stopping kernel threads without mess. */
-#include <linux/err.h>
-#include <linux/sched.h>
-
-__printf(4, 5)
-struct task_struct *kthread_create_on_node(int (*threadfn)(void *data),
-					   void *data,
-					   int node,
-					   const char namefmt[], ...);
-
-#define kthread_create(threadfn, data, namefmt, arg...) \
-	kthread_create_on_node(threadfn, data, -1, namefmt, ##arg)
-
-
-/**
- * kthread_run - create and wake a thread.
- * @threadfn: the function to run until signal_pending(current).
- * @data: data ptr for @threadfn.
- * @namefmt: printf-style name for the thread.
- *
- * Description: Convenient wrapper for kthread_create() followed by
- * wake_up_process().  Returns the kthread or ERR_PTR(-ENOMEM).
- */
-#define kthread_run(threadfn, data, namefmt, ...)			   \
-({									   \
-	struct task_struct *__k						   \
-		= kthread_create(threadfn, data, namefmt, ## __VA_ARGS__); \
-	if (!IS_ERR(__k))						   \
-		wake_up_process(__k);					   \
-	__k;								   \
-})
-
-void kthread_bind(struct task_struct *k, unsigned int cpu);
-int kthread_stop(struct task_struct *k);
-int kthread_should_stop(void);
-bool kthread_freezable_should_stop(bool *was_frozen);
-void *kthread_data(struct task_struct *k);
-
-int kthreadd(void *unused);
-extern struct task_struct *kthreadd_task;
-extern int tsk_fork_get_node(struct task_struct *tsk);
-
-/*
- * Simple work processor based on kthread.
- *
- * This provides easier way to make use of kthreads.  A kthread_work
- * can be queued and flushed using queue/flush_kthread_work()
- * respectively.  Queued kthread_works are processed by a kthread
- * running kthread_worker_fn().
- */
-struct kthread_work;
-typedef void (*kthread_work_func_t)(struct kthread_work *work);
-
-struct kthread_worker {
-	spinlock_t		lock;
-	struct list_head	work_list;
-	struct task_struct	*task;
-	struct kthread_work	*current_work;
-};
-
-struct kthread_work {
-	struct list_head	node;
-	kthread_work_func_t	func;
-	wait_queue_head_t	done;
-	struct kthread_worker	*worker;
-};
-
-#define KTHREAD_WORKER_INIT(worker)	{				\
-	.lock = __SPIN_LOCK_UNLOCKED((worker).lock),			\
-	.work_list = LIST_HEAD_INIT((worker).work_list),		\
-	}
-
-#define KTHREAD_WORK_INIT(work, fn)	{				\
-	.node = LIST_HEAD_INIT((work).node),				\
-	.func = (fn),							\
-	.done = __WAIT_QUEUE_HEAD_INITIALIZER((work).done),		\
-	}
-
-#define DEFINE_KTHREAD_WORKER(worker)					\
-	struct kthread_worker worker = KTHREAD_WORKER_INIT(worker)
-
-#define DEFINE_KTHREAD_WORK(work, fn)					\
-	struct kthread_work work = KTHREAD_WORK_INIT(work, fn)
-
-/*
- * kthread_worker.lock and kthread_work.done need their own lockdep class
- * keys if they are defined on stack with lockdep enabled.  Use the
- * following macros when defining them on stack.
- */
-#ifdef CONFIG_LOCKDEP
-# define KTHREAD_WORKER_INIT_ONSTACK(worker)				\
-	({ init_kthread_worker(&worker); worker; })
-# define DEFINE_KTHREAD_WORKER_ONSTACK(worker)				\
-	struct kthread_worker worker = KTHREAD_WORKER_INIT_ONSTACK(worker)
-# define KTHREAD_WORK_INIT_ONSTACK(work, fn)				\
-	({ init_kthread_work((&work), fn); work; })
-# define DEFINE_KTHREAD_WORK_ONSTACK(work, fn)				\
-	struct kthread_work work = KTHREAD_WORK_INIT_ONSTACK(work, fn)
-#else
-# define DEFINE_KTHREAD_WORKER_ONSTACK(worker) DEFINE_KTHREAD_WORKER(worker)
-# define DEFINE_KTHREAD_WORK_ONSTACK(work, fn) DEFINE_KTHREAD_WORK(work, fn)
-#endif
-
-extern void __init_kthread_worker(struct kthread_worker *worker,
-			const char *name, struct lock_class_key *key);
-
-#define init_kthread_worker(worker)					\
-	do {								\
-		static struct lock_class_key __key;			\
-		__init_kthread_worker((worker), "("#worker")->lock", &__key); \
-	} while (0)
-
-#define init_kthread_work(work, fn)					\
-	do {								\
-		memset((work), 0, sizeof(struct kthread_work));		\
-		INIT_LIST_HEAD(&(work)->node);				\
-		(work)->func = (fn);					\
-		init_waitqueue_head(&(work)->done);			\
-	} while (0)
-
-int kthread_worker_fn(void *worker_ptr);
-
-bool queue_kthread_work(struct kthread_worker *worker,
-			struct kthread_work *work);
-void flush_kthread_work(struct kthread_work *work);
-void flush_kthread_worker(struct kthread_worker *worker);
-
-#endif /* _LINUX_KTHREAD_H */
diff --git a/ANDROID_3.4.5/include/linux/ktime.h b/ANDROID_3.4.5/include/linux/ktime.h
deleted file mode 100644
index 603bec29..00000000
--- a/ANDROID_3.4.5/include/linux/ktime.h
+++ /dev/null
@@ -1,342 +0,0 @@
-/*
- *  include/linux/ktime.h
- *
- *  ktime_t - nanosecond-resolution time format.
- *
- *   Copyright(C) 2005, Thomas Gleixner <tglx@linutronix.de>
- *   Copyright(C) 2005, Red Hat, Inc., Ingo Molnar
- *
- *  data type definitions, declarations, prototypes and macros.
- *
- *  Started by: Thomas Gleixner and Ingo Molnar
- *
- *  Credits:
- *
- *  	Roman Zippel provided the ideas and primary code snippets of
- *  	the ktime_t union and further simplifications of the original
- *  	code.
- *
- *  For licencing details see kernel-base/COPYING
- */
-#ifndef _LINUX_KTIME_H
-#define _LINUX_KTIME_H
-
-#include <linux/time.h>
-#include <linux/jiffies.h>
-
-/*
- * ktime_t:
- *
- * On 64-bit CPUs a single 64-bit variable is used to store the hrtimers
- * internal representation of time values in scalar nanoseconds. The
- * design plays out best on 64-bit CPUs, where most conversions are
- * NOPs and most arithmetic ktime_t operations are plain arithmetic
- * operations.
- *
- * On 32-bit CPUs an optimized representation of the timespec structure
- * is used to avoid expensive conversions from and to timespecs. The
- * endian-aware order of the tv struct members is chosen to allow
- * mathematical operations on the tv64 member of the union too, which
- * for certain operations produces better code.
- *
- * For architectures with efficient support for 64/32-bit conversions the
- * plain scalar nanosecond based representation can be selected by the
- * config switch CONFIG_KTIME_SCALAR.
- */
-union ktime {
-	s64	tv64;
-#if BITS_PER_LONG != 64 && !defined(CONFIG_KTIME_SCALAR)
-	struct {
-# ifdef __BIG_ENDIAN
-	s32	sec, nsec;
-# else
-	s32	nsec, sec;
-# endif
-	} tv;
-#endif
-};
-
-typedef union ktime ktime_t;		/* Kill this */
-
-#define KTIME_MAX			((s64)~((u64)1 << 63))
-#if (BITS_PER_LONG == 64)
-# define KTIME_SEC_MAX			(KTIME_MAX / NSEC_PER_SEC)
-#else
-# define KTIME_SEC_MAX			LONG_MAX
-#endif
-
-/*
- * ktime_t definitions when using the 64-bit scalar representation:
- */
-
-#if (BITS_PER_LONG == 64) || defined(CONFIG_KTIME_SCALAR)
-
-/**
- * ktime_set - Set a ktime_t variable from a seconds/nanoseconds value
- * @secs:	seconds to set
- * @nsecs:	nanoseconds to set
- *
- * Return the ktime_t representation of the value
- */
-static inline ktime_t ktime_set(const long secs, const unsigned long nsecs)
-{
-#if (BITS_PER_LONG == 64)
-	if (unlikely(secs >= KTIME_SEC_MAX))
-		return (ktime_t){ .tv64 = KTIME_MAX };
-#endif
-	return (ktime_t) { .tv64 = (s64)secs * NSEC_PER_SEC + (s64)nsecs };
-}
-
-/* Subtract two ktime_t variables. rem = lhs -rhs: */
-#define ktime_sub(lhs, rhs) \
-		({ (ktime_t){ .tv64 = (lhs).tv64 - (rhs).tv64 }; })
-
-/* Add two ktime_t variables. res = lhs + rhs: */
-#define ktime_add(lhs, rhs) \
-		({ (ktime_t){ .tv64 = (lhs).tv64 + (rhs).tv64 }; })
-
-/*
- * Add a ktime_t variable and a scalar nanosecond value.
- * res = kt + nsval:
- */
-#define ktime_add_ns(kt, nsval) \
-		({ (ktime_t){ .tv64 = (kt).tv64 + (nsval) }; })
-
-/*
- * Subtract a scalar nanosecod from a ktime_t variable
- * res = kt - nsval:
- */
-#define ktime_sub_ns(kt, nsval) \
-		({ (ktime_t){ .tv64 = (kt).tv64 - (nsval) }; })
-
-/* convert a timespec to ktime_t format: */
-static inline ktime_t timespec_to_ktime(struct timespec ts)
-{
-	return ktime_set(ts.tv_sec, ts.tv_nsec);
-}
-
-/* convert a timeval to ktime_t format: */
-static inline ktime_t timeval_to_ktime(struct timeval tv)
-{
-	return ktime_set(tv.tv_sec, tv.tv_usec * NSEC_PER_USEC);
-}
-
-/* Map the ktime_t to timespec conversion to ns_to_timespec function */
-#define ktime_to_timespec(kt)		ns_to_timespec((kt).tv64)
-
-/* Map the ktime_t to timeval conversion to ns_to_timeval function */
-#define ktime_to_timeval(kt)		ns_to_timeval((kt).tv64)
-
-/* Convert ktime_t to nanoseconds - NOP in the scalar storage format: */
-#define ktime_to_ns(kt)			((kt).tv64)
-
-#else	/* !((BITS_PER_LONG == 64) || defined(CONFIG_KTIME_SCALAR)) */
-
-/*
- * Helper macros/inlines to get the ktime_t math right in the timespec
- * representation. The macros are sometimes ugly - their actual use is
- * pretty okay-ish, given the circumstances. We do all this for
- * performance reasons. The pure scalar nsec_t based code was nice and
- * simple, but created too many 64-bit / 32-bit conversions and divisions.
- *
- * Be especially aware that negative values are represented in a way
- * that the tv.sec field is negative and the tv.nsec field is greater
- * or equal to zero but less than nanoseconds per second. This is the
- * same representation which is used by timespecs.
- *
- *   tv.sec < 0 and 0 >= tv.nsec < NSEC_PER_SEC
- */
-
-/* Set a ktime_t variable to a value in sec/nsec representation: */
-static inline ktime_t ktime_set(const long secs, const unsigned long nsecs)
-{
-	return (ktime_t) { .tv = { .sec = secs, .nsec = nsecs } };
-}
-
-/**
- * ktime_sub - subtract two ktime_t variables
- * @lhs:	minuend
- * @rhs:	subtrahend
- *
- * Returns the remainder of the subtraction
- */
-static inline ktime_t ktime_sub(const ktime_t lhs, const ktime_t rhs)
-{
-	ktime_t res;
-
-	res.tv64 = lhs.tv64 - rhs.tv64;
-	if (res.tv.nsec < 0)
-		res.tv.nsec += NSEC_PER_SEC;
-
-	return res;
-}
-
-/**
- * ktime_add - add two ktime_t variables
- * @add1:	addend1
- * @add2:	addend2
- *
- * Returns the sum of @add1 and @add2.
- */
-static inline ktime_t ktime_add(const ktime_t add1, const ktime_t add2)
-{
-	ktime_t res;
-
-	res.tv64 = add1.tv64 + add2.tv64;
-	/*
-	 * performance trick: the (u32) -NSEC gives 0x00000000Fxxxxxxx
-	 * so we subtract NSEC_PER_SEC and add 1 to the upper 32 bit.
-	 *
-	 * it's equivalent to:
-	 *   tv.nsec -= NSEC_PER_SEC
-	 *   tv.sec ++;
-	 */
-	if (res.tv.nsec >= NSEC_PER_SEC)
-		res.tv64 += (u32)-NSEC_PER_SEC;
-
-	return res;
-}
-
-/**
- * ktime_add_ns - Add a scalar nanoseconds value to a ktime_t variable
- * @kt:		addend
- * @nsec:	the scalar nsec value to add
- *
- * Returns the sum of @kt and @nsec in ktime_t format
- */
-extern ktime_t ktime_add_ns(const ktime_t kt, u64 nsec);
-
-/**
- * ktime_sub_ns - Subtract a scalar nanoseconds value from a ktime_t variable
- * @kt:		minuend
- * @nsec:	the scalar nsec value to subtract
- *
- * Returns the subtraction of @nsec from @kt in ktime_t format
- */
-extern ktime_t ktime_sub_ns(const ktime_t kt, u64 nsec);
-
-/**
- * timespec_to_ktime - convert a timespec to ktime_t format
- * @ts:		the timespec variable to convert
- *
- * Returns a ktime_t variable with the converted timespec value
- */
-static inline ktime_t timespec_to_ktime(const struct timespec ts)
-{
-	return (ktime_t) { .tv = { .sec = (s32)ts.tv_sec,
-			   	   .nsec = (s32)ts.tv_nsec } };
-}
-
-/**
- * timeval_to_ktime - convert a timeval to ktime_t format
- * @tv:		the timeval variable to convert
- *
- * Returns a ktime_t variable with the converted timeval value
- */
-static inline ktime_t timeval_to_ktime(const struct timeval tv)
-{
-	return (ktime_t) { .tv = { .sec = (s32)tv.tv_sec,
-				   .nsec = (s32)tv.tv_usec * 1000 } };
-}
-
-/**
- * ktime_to_timespec - convert a ktime_t variable to timespec format
- * @kt:		the ktime_t variable to convert
- *
- * Returns the timespec representation of the ktime value
- */
-static inline struct timespec ktime_to_timespec(const ktime_t kt)
-{
-	return (struct timespec) { .tv_sec = (time_t) kt.tv.sec,
-				   .tv_nsec = (long) kt.tv.nsec };
-}
-
-/**
- * ktime_to_timeval - convert a ktime_t variable to timeval format
- * @kt:		the ktime_t variable to convert
- *
- * Returns the timeval representation of the ktime value
- */
-static inline struct timeval ktime_to_timeval(const ktime_t kt)
-{
-	return (struct timeval) {
-		.tv_sec = (time_t) kt.tv.sec,
-		.tv_usec = (suseconds_t) (kt.tv.nsec / NSEC_PER_USEC) };
-}
-
-/**
- * ktime_to_ns - convert a ktime_t variable to scalar nanoseconds
- * @kt:		the ktime_t variable to convert
- *
- * Returns the scalar nanoseconds representation of @kt
- */
-static inline s64 ktime_to_ns(const ktime_t kt)
-{
-	return (s64) kt.tv.sec * NSEC_PER_SEC + kt.tv.nsec;
-}
-
-#endif	/* !((BITS_PER_LONG == 64) || defined(CONFIG_KTIME_SCALAR)) */
-
-/**
- * ktime_equal - Compares two ktime_t variables to see if they are equal
- * @cmp1:	comparable1
- * @cmp2:	comparable2
- *
- * Compare two ktime_t variables, returns 1 if equal
- */
-static inline int ktime_equal(const ktime_t cmp1, const ktime_t cmp2)
-{
-	return cmp1.tv64 == cmp2.tv64;
-}
-
-static inline s64 ktime_to_us(const ktime_t kt)
-{
-	struct timeval tv = ktime_to_timeval(kt);
-	return (s64) tv.tv_sec * USEC_PER_SEC + tv.tv_usec;
-}
-
-static inline s64 ktime_to_ms(const ktime_t kt)
-{
-	struct timeval tv = ktime_to_timeval(kt);
-	return (s64) tv.tv_sec * MSEC_PER_SEC + tv.tv_usec / USEC_PER_MSEC;
-}
-
-static inline s64 ktime_us_delta(const ktime_t later, const ktime_t earlier)
-{
-       return ktime_to_us(ktime_sub(later, earlier));
-}
-
-static inline ktime_t ktime_add_us(const ktime_t kt, const u64 usec)
-{
-	return ktime_add_ns(kt, usec * 1000);
-}
-
-static inline ktime_t ktime_sub_us(const ktime_t kt, const u64 usec)
-{
-	return ktime_sub_ns(kt, usec * 1000);
-}
-
-extern ktime_t ktime_add_safe(const ktime_t lhs, const ktime_t rhs);
-
-/*
- * The resolution of the clocks. The resolution value is returned in
- * the clock_getres() system call to give application programmers an
- * idea of the (in)accuracy of timers. Timer values are rounded up to
- * this resolution values.
- */
-#define LOW_RES_NSEC		TICK_NSEC
-#define KTIME_LOW_RES		(ktime_t){ .tv64 = LOW_RES_NSEC }
-
-/* Get the monotonic time in timespec format: */
-extern void ktime_get_ts(struct timespec *ts);
-
-/* Get the real (wall-) time in timespec format: */
-#define ktime_get_real_ts(ts)	getnstimeofday(ts)
-
-static inline ktime_t ns_to_ktime(u64 ns)
-{
-	static const ktime_t ktime_zero = { .tv64 = 0 };
-	return ktime_add_ns(ktime_zero, ns);
-}
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/kvm.h b/ANDROID_3.4.5/include/linux/kvm.h
deleted file mode 100644
index 6c322a90..00000000
--- a/ANDROID_3.4.5/include/linux/kvm.h
+++ /dev/null
@@ -1,913 +0,0 @@
-#ifndef __LINUX_KVM_H
-#define __LINUX_KVM_H
-
-/*
- * Userspace interface for /dev/kvm - kernel based virtual machine
- *
- * Note: you must update KVM_API_VERSION if you change this interface.
- */
-
-#include <linux/types.h>
-#include <linux/compiler.h>
-#include <linux/ioctl.h>
-#include <asm/kvm.h>
-
-#define KVM_API_VERSION 12
-
-/* *** Deprecated interfaces *** */
-
-#define KVM_TRC_SHIFT           16
-
-#define KVM_TRC_ENTRYEXIT       (1 << KVM_TRC_SHIFT)
-#define KVM_TRC_HANDLER         (1 << (KVM_TRC_SHIFT + 1))
-
-#define KVM_TRC_VMENTRY         (KVM_TRC_ENTRYEXIT + 0x01)
-#define KVM_TRC_VMEXIT          (KVM_TRC_ENTRYEXIT + 0x02)
-#define KVM_TRC_PAGE_FAULT      (KVM_TRC_HANDLER + 0x01)
-
-#define KVM_TRC_HEAD_SIZE       12
-#define KVM_TRC_CYCLE_SIZE      8
-#define KVM_TRC_EXTRA_MAX       7
-
-#define KVM_TRC_INJ_VIRQ         (KVM_TRC_HANDLER + 0x02)
-#define KVM_TRC_REDELIVER_EVT    (KVM_TRC_HANDLER + 0x03)
-#define KVM_TRC_PEND_INTR        (KVM_TRC_HANDLER + 0x04)
-#define KVM_TRC_IO_READ          (KVM_TRC_HANDLER + 0x05)
-#define KVM_TRC_IO_WRITE         (KVM_TRC_HANDLER + 0x06)
-#define KVM_TRC_CR_READ          (KVM_TRC_HANDLER + 0x07)
-#define KVM_TRC_CR_WRITE         (KVM_TRC_HANDLER + 0x08)
-#define KVM_TRC_DR_READ          (KVM_TRC_HANDLER + 0x09)
-#define KVM_TRC_DR_WRITE         (KVM_TRC_HANDLER + 0x0A)
-#define KVM_TRC_MSR_READ         (KVM_TRC_HANDLER + 0x0B)
-#define KVM_TRC_MSR_WRITE        (KVM_TRC_HANDLER + 0x0C)
-#define KVM_TRC_CPUID            (KVM_TRC_HANDLER + 0x0D)
-#define KVM_TRC_INTR             (KVM_TRC_HANDLER + 0x0E)
-#define KVM_TRC_NMI              (KVM_TRC_HANDLER + 0x0F)
-#define KVM_TRC_VMMCALL          (KVM_TRC_HANDLER + 0x10)
-#define KVM_TRC_HLT              (KVM_TRC_HANDLER + 0x11)
-#define KVM_TRC_CLTS             (KVM_TRC_HANDLER + 0x12)
-#define KVM_TRC_LMSW             (KVM_TRC_HANDLER + 0x13)
-#define KVM_TRC_APIC_ACCESS      (KVM_TRC_HANDLER + 0x14)
-#define KVM_TRC_TDP_FAULT        (KVM_TRC_HANDLER + 0x15)
-#define KVM_TRC_GTLB_WRITE       (KVM_TRC_HANDLER + 0x16)
-#define KVM_TRC_STLB_WRITE       (KVM_TRC_HANDLER + 0x17)
-#define KVM_TRC_STLB_INVAL       (KVM_TRC_HANDLER + 0x18)
-#define KVM_TRC_PPC_INSTR        (KVM_TRC_HANDLER + 0x19)
-
-struct kvm_user_trace_setup {
-	__u32 buf_size;
-	__u32 buf_nr;
-};
-
-#define __KVM_DEPRECATED_MAIN_W_0x06 \
-	_IOW(KVMIO, 0x06, struct kvm_user_trace_setup)
-#define __KVM_DEPRECATED_MAIN_0x07 _IO(KVMIO, 0x07)
-#define __KVM_DEPRECATED_MAIN_0x08 _IO(KVMIO, 0x08)
-
-#define __KVM_DEPRECATED_VM_R_0x70 _IOR(KVMIO, 0x70, struct kvm_assigned_irq)
-
-struct kvm_breakpoint {
-	__u32 enabled;
-	__u32 padding;
-	__u64 address;
-};
-
-struct kvm_debug_guest {
-	__u32 enabled;
-	__u32 pad;
-	struct kvm_breakpoint breakpoints[4];
-	__u32 singlestep;
-};
-
-#define __KVM_DEPRECATED_VCPU_W_0x87 _IOW(KVMIO, 0x87, struct kvm_debug_guest)
-
-/* *** End of deprecated interfaces *** */
-
-
-/* for KVM_CREATE_MEMORY_REGION */
-struct kvm_memory_region {
-	__u32 slot;
-	__u32 flags;
-	__u64 guest_phys_addr;
-	__u64 memory_size; /* bytes */
-};
-
-/* for KVM_SET_USER_MEMORY_REGION */
-struct kvm_userspace_memory_region {
-	__u32 slot;
-	__u32 flags;
-	__u64 guest_phys_addr;
-	__u64 memory_size; /* bytes */
-	__u64 userspace_addr; /* start of the userspace allocated memory */
-};
-
-/* for kvm_memory_region::flags */
-#define KVM_MEM_LOG_DIRTY_PAGES  1UL
-#define KVM_MEMSLOT_INVALID      (1UL << 1)
-
-/* for KVM_IRQ_LINE */
-struct kvm_irq_level {
-	/*
-	 * ACPI gsi notion of irq.
-	 * For IA-64 (APIC model) IOAPIC0: irq 0-23; IOAPIC1: irq 24-47..
-	 * For X86 (standard AT mode) PIC0/1: irq 0-15. IOAPIC0: 0-23..
-	 */
-	union {
-		__u32 irq;
-		__s32 status;
-	};
-	__u32 level;
-};
-
-
-struct kvm_irqchip {
-	__u32 chip_id;
-	__u32 pad;
-        union {
-		char dummy[512];  /* reserving space */
-#ifdef __KVM_HAVE_PIT
-		struct kvm_pic_state pic;
-#endif
-#ifdef __KVM_HAVE_IOAPIC
-		struct kvm_ioapic_state ioapic;
-#endif
-	} chip;
-};
-
-/* for KVM_CREATE_PIT2 */
-struct kvm_pit_config {
-	__u32 flags;
-	__u32 pad[15];
-};
-
-#define KVM_PIT_SPEAKER_DUMMY     1
-
-#define KVM_EXIT_UNKNOWN          0
-#define KVM_EXIT_EXCEPTION        1
-#define KVM_EXIT_IO               2
-#define KVM_EXIT_HYPERCALL        3
-#define KVM_EXIT_DEBUG            4
-#define KVM_EXIT_HLT              5
-#define KVM_EXIT_MMIO             6
-#define KVM_EXIT_IRQ_WINDOW_OPEN  7
-#define KVM_EXIT_SHUTDOWN         8
-#define KVM_EXIT_FAIL_ENTRY       9
-#define KVM_EXIT_INTR             10
-#define KVM_EXIT_SET_TPR          11
-#define KVM_EXIT_TPR_ACCESS       12
-#define KVM_EXIT_S390_SIEIC       13
-#define KVM_EXIT_S390_RESET       14
-#define KVM_EXIT_DCR              15
-#define KVM_EXIT_NMI              16
-#define KVM_EXIT_INTERNAL_ERROR   17
-#define KVM_EXIT_OSI              18
-#define KVM_EXIT_PAPR_HCALL	  19
-#define KVM_EXIT_S390_UCONTROL	  20
-
-/* For KVM_EXIT_INTERNAL_ERROR */
-#define KVM_INTERNAL_ERROR_EMULATION 1
-#define KVM_INTERNAL_ERROR_SIMUL_EX 2
-
-/* for KVM_RUN, returned by mmap(vcpu_fd, offset=0) */
-struct kvm_run {
-	/* in */
-	__u8 request_interrupt_window;
-	__u8 padding1[7];
-
-	/* out */
-	__u32 exit_reason;
-	__u8 ready_for_interrupt_injection;
-	__u8 if_flag;
-	__u8 padding2[2];
-
-	/* in (pre_kvm_run), out (post_kvm_run) */
-	__u64 cr8;
-	__u64 apic_base;
-
-#ifdef __KVM_S390
-	/* the processor status word for s390 */
-	__u64 psw_mask; /* psw upper half */
-	__u64 psw_addr; /* psw lower half */
-#endif
-	union {
-		/* KVM_EXIT_UNKNOWN */
-		struct {
-			__u64 hardware_exit_reason;
-		} hw;
-		/* KVM_EXIT_FAIL_ENTRY */
-		struct {
-			__u64 hardware_entry_failure_reason;
-		} fail_entry;
-		/* KVM_EXIT_EXCEPTION */
-		struct {
-			__u32 exception;
-			__u32 error_code;
-		} ex;
-		/* KVM_EXIT_IO */
-		struct {
-#define KVM_EXIT_IO_IN  0
-#define KVM_EXIT_IO_OUT 1
-			__u8 direction;
-			__u8 size; /* bytes */
-			__u16 port;
-			__u32 count;
-			__u64 data_offset; /* relative to kvm_run start */
-		} io;
-		struct {
-			struct kvm_debug_exit_arch arch;
-		} debug;
-		/* KVM_EXIT_MMIO */
-		struct {
-			__u64 phys_addr;
-			__u8  data[8];
-			__u32 len;
-			__u8  is_write;
-		} mmio;
-		/* KVM_EXIT_HYPERCALL */
-		struct {
-			__u64 nr;
-			__u64 args[6];
-			__u64 ret;
-			__u32 longmode;
-			__u32 pad;
-		} hypercall;
-		/* KVM_EXIT_TPR_ACCESS */
-		struct {
-			__u64 rip;
-			__u32 is_write;
-			__u32 pad;
-		} tpr_access;
-		/* KVM_EXIT_S390_SIEIC */
-		struct {
-			__u8 icptcode;
-			__u16 ipa;
-			__u32 ipb;
-		} s390_sieic;
-		/* KVM_EXIT_S390_RESET */
-#define KVM_S390_RESET_POR       1
-#define KVM_S390_RESET_CLEAR     2
-#define KVM_S390_RESET_SUBSYSTEM 4
-#define KVM_S390_RESET_CPU_INIT  8
-#define KVM_S390_RESET_IPL       16
-		__u64 s390_reset_flags;
-		/* KVM_EXIT_S390_UCONTROL */
-		struct {
-			__u64 trans_exc_code;
-			__u32 pgm_code;
-		} s390_ucontrol;
-		/* KVM_EXIT_DCR */
-		struct {
-			__u32 dcrn;
-			__u32 data;
-			__u8  is_write;
-		} dcr;
-		struct {
-			__u32 suberror;
-			/* Available with KVM_CAP_INTERNAL_ERROR_DATA: */
-			__u32 ndata;
-			__u64 data[16];
-		} internal;
-		/* KVM_EXIT_OSI */
-		struct {
-			__u64 gprs[32];
-		} osi;
-		struct {
-			__u64 nr;
-			__u64 ret;
-			__u64 args[9];
-		} papr_hcall;
-		/* Fix the size of the union. */
-		char padding[256];
-	};
-
-	/*
-	 * shared registers between kvm and userspace.
-	 * kvm_valid_regs specifies the register classes set by the host
-	 * kvm_dirty_regs specified the register classes dirtied by userspace
-	 * struct kvm_sync_regs is architecture specific, as well as the
-	 * bits for kvm_valid_regs and kvm_dirty_regs
-	 */
-	__u64 kvm_valid_regs;
-	__u64 kvm_dirty_regs;
-	union {
-		struct kvm_sync_regs regs;
-		char padding[1024];
-	} s;
-};
-
-/* for KVM_REGISTER_COALESCED_MMIO / KVM_UNREGISTER_COALESCED_MMIO */
-
-struct kvm_coalesced_mmio_zone {
-	__u64 addr;
-	__u32 size;
-	__u32 pad;
-};
-
-struct kvm_coalesced_mmio {
-	__u64 phys_addr;
-	__u32 len;
-	__u32 pad;
-	__u8  data[8];
-};
-
-struct kvm_coalesced_mmio_ring {
-	__u32 first, last;
-	struct kvm_coalesced_mmio coalesced_mmio[0];
-};
-
-#define KVM_COALESCED_MMIO_MAX \
-	((PAGE_SIZE - sizeof(struct kvm_coalesced_mmio_ring)) / \
-	 sizeof(struct kvm_coalesced_mmio))
-
-/* for KVM_TRANSLATE */
-struct kvm_translation {
-	/* in */
-	__u64 linear_address;
-
-	/* out */
-	__u64 physical_address;
-	__u8  valid;
-	__u8  writeable;
-	__u8  usermode;
-	__u8  pad[5];
-};
-
-/* for KVM_INTERRUPT */
-struct kvm_interrupt {
-	/* in */
-	__u32 irq;
-};
-
-/* for KVM_GET_DIRTY_LOG */
-struct kvm_dirty_log {
-	__u32 slot;
-	__u32 padding1;
-	union {
-		void __user *dirty_bitmap; /* one bit per page */
-		__u64 padding2;
-	};
-};
-
-/* for KVM_SET_SIGNAL_MASK */
-struct kvm_signal_mask {
-	__u32 len;
-	__u8  sigset[0];
-};
-
-/* for KVM_TPR_ACCESS_REPORTING */
-struct kvm_tpr_access_ctl {
-	__u32 enabled;
-	__u32 flags;
-	__u32 reserved[8];
-};
-
-/* for KVM_SET_VAPIC_ADDR */
-struct kvm_vapic_addr {
-	__u64 vapic_addr;
-};
-
-/* for KVM_SET_MPSTATE */
-
-#define KVM_MP_STATE_RUNNABLE          0
-#define KVM_MP_STATE_UNINITIALIZED     1
-#define KVM_MP_STATE_INIT_RECEIVED     2
-#define KVM_MP_STATE_HALTED            3
-#define KVM_MP_STATE_SIPI_RECEIVED     4
-
-struct kvm_mp_state {
-	__u32 mp_state;
-};
-
-struct kvm_s390_psw {
-	__u64 mask;
-	__u64 addr;
-};
-
-/* valid values for type in kvm_s390_interrupt */
-#define KVM_S390_SIGP_STOP		0xfffe0000u
-#define KVM_S390_PROGRAM_INT		0xfffe0001u
-#define KVM_S390_SIGP_SET_PREFIX	0xfffe0002u
-#define KVM_S390_RESTART		0xfffe0003u
-#define KVM_S390_INT_VIRTIO		0xffff2603u
-#define KVM_S390_INT_SERVICE		0xffff2401u
-#define KVM_S390_INT_EMERGENCY		0xffff1201u
-#define KVM_S390_INT_EXTERNAL_CALL	0xffff1202u
-
-struct kvm_s390_interrupt {
-	__u32 type;
-	__u32 parm;
-	__u64 parm64;
-};
-
-/* for KVM_SET_GUEST_DEBUG */
-
-#define KVM_GUESTDBG_ENABLE		0x00000001
-#define KVM_GUESTDBG_SINGLESTEP		0x00000002
-
-struct kvm_guest_debug {
-	__u32 control;
-	__u32 pad;
-	struct kvm_guest_debug_arch arch;
-};
-
-enum {
-	kvm_ioeventfd_flag_nr_datamatch,
-	kvm_ioeventfd_flag_nr_pio,
-	kvm_ioeventfd_flag_nr_deassign,
-	kvm_ioeventfd_flag_nr_max,
-};
-
-#define KVM_IOEVENTFD_FLAG_DATAMATCH (1 << kvm_ioeventfd_flag_nr_datamatch)
-#define KVM_IOEVENTFD_FLAG_PIO       (1 << kvm_ioeventfd_flag_nr_pio)
-#define KVM_IOEVENTFD_FLAG_DEASSIGN  (1 << kvm_ioeventfd_flag_nr_deassign)
-
-#define KVM_IOEVENTFD_VALID_FLAG_MASK  ((1 << kvm_ioeventfd_flag_nr_max) - 1)
-
-struct kvm_ioeventfd {
-	__u64 datamatch;
-	__u64 addr;        /* legal pio/mmio address */
-	__u32 len;         /* 1, 2, 4, or 8 bytes    */
-	__s32 fd;
-	__u32 flags;
-	__u8  pad[36];
-};
-
-/* for KVM_ENABLE_CAP */
-struct kvm_enable_cap {
-	/* in */
-	__u32 cap;
-	__u32 flags;
-	__u64 args[4];
-	__u8  pad[64];
-};
-
-/* for KVM_PPC_GET_PVINFO */
-struct kvm_ppc_pvinfo {
-	/* out */
-	__u32 flags;
-	__u32 hcall[4];
-	__u8  pad[108];
-};
-
-#define KVMIO 0xAE
-
-/* machine type bits, to be used as argument to KVM_CREATE_VM */
-#define KVM_VM_S390_UCONTROL	1
-
-#define KVM_S390_SIE_PAGE_OFFSET 1
-
-/*
- * ioctls for /dev/kvm fds:
- */
-#define KVM_GET_API_VERSION       _IO(KVMIO,   0x00)
-#define KVM_CREATE_VM             _IO(KVMIO,   0x01) /* returns a VM fd */
-#define KVM_GET_MSR_INDEX_LIST    _IOWR(KVMIO, 0x02, struct kvm_msr_list)
-
-#define KVM_S390_ENABLE_SIE       _IO(KVMIO,   0x06)
-/*
- * Check if a kvm extension is available.  Argument is extension number,
- * return is 1 (yes) or 0 (no, sorry).
- */
-#define KVM_CHECK_EXTENSION       _IO(KVMIO,   0x03)
-/*
- * Get size for mmap(vcpu_fd)
- */
-#define KVM_GET_VCPU_MMAP_SIZE    _IO(KVMIO,   0x04) /* in bytes */
-#define KVM_GET_SUPPORTED_CPUID   _IOWR(KVMIO, 0x05, struct kvm_cpuid2)
-#define KVM_TRACE_ENABLE          __KVM_DEPRECATED_MAIN_W_0x06
-#define KVM_TRACE_PAUSE           __KVM_DEPRECATED_MAIN_0x07
-#define KVM_TRACE_DISABLE         __KVM_DEPRECATED_MAIN_0x08
-
-/*
- * Extension capability list.
- */
-#define KVM_CAP_IRQCHIP	  0
-#define KVM_CAP_HLT	  1
-#define KVM_CAP_MMU_SHADOW_CACHE_CONTROL 2
-#define KVM_CAP_USER_MEMORY 3
-#define KVM_CAP_SET_TSS_ADDR 4
-#define KVM_CAP_VAPIC 6
-#define KVM_CAP_EXT_CPUID 7
-#define KVM_CAP_CLOCKSOURCE 8
-#define KVM_CAP_NR_VCPUS 9       /* returns recommended max vcpus per vm */
-#define KVM_CAP_NR_MEMSLOTS 10   /* returns max memory slots per vm */
-#define KVM_CAP_PIT 11
-#define KVM_CAP_NOP_IO_DELAY 12
-#define KVM_CAP_PV_MMU 13
-#define KVM_CAP_MP_STATE 14
-#define KVM_CAP_COALESCED_MMIO 15
-#define KVM_CAP_SYNC_MMU 16  /* Changes to host mmap are reflected in guest */
-#ifdef __KVM_HAVE_DEVICE_ASSIGNMENT
-#define KVM_CAP_DEVICE_ASSIGNMENT 17
-#endif
-#define KVM_CAP_IOMMU 18
-#ifdef __KVM_HAVE_MSI
-#define KVM_CAP_DEVICE_MSI 20
-#endif
-/* Bug in KVM_SET_USER_MEMORY_REGION fixed: */
-#define KVM_CAP_DESTROY_MEMORY_REGION_WORKS 21
-#ifdef __KVM_HAVE_USER_NMI
-#define KVM_CAP_USER_NMI 22
-#endif
-#ifdef __KVM_HAVE_GUEST_DEBUG
-#define KVM_CAP_SET_GUEST_DEBUG 23
-#endif
-#ifdef __KVM_HAVE_PIT
-#define KVM_CAP_REINJECT_CONTROL 24
-#endif
-#ifdef __KVM_HAVE_IOAPIC
-#define KVM_CAP_IRQ_ROUTING 25
-#endif
-#define KVM_CAP_IRQ_INJECT_STATUS 26
-#ifdef __KVM_HAVE_DEVICE_ASSIGNMENT
-#define KVM_CAP_DEVICE_DEASSIGNMENT 27
-#endif
-#ifdef __KVM_HAVE_MSIX
-#define KVM_CAP_DEVICE_MSIX 28
-#endif
-#define KVM_CAP_ASSIGN_DEV_IRQ 29
-/* Another bug in KVM_SET_USER_MEMORY_REGION fixed: */
-#define KVM_CAP_JOIN_MEMORY_REGIONS_WORKS 30
-#ifdef __KVM_HAVE_MCE
-#define KVM_CAP_MCE 31
-#endif
-#define KVM_CAP_IRQFD 32
-#ifdef __KVM_HAVE_PIT
-#define KVM_CAP_PIT2 33
-#endif
-#define KVM_CAP_SET_BOOT_CPU_ID 34
-#ifdef __KVM_HAVE_PIT_STATE2
-#define KVM_CAP_PIT_STATE2 35
-#endif
-#define KVM_CAP_IOEVENTFD 36
-#define KVM_CAP_SET_IDENTITY_MAP_ADDR 37
-#ifdef __KVM_HAVE_XEN_HVM
-#define KVM_CAP_XEN_HVM 38
-#endif
-#define KVM_CAP_ADJUST_CLOCK 39
-#define KVM_CAP_INTERNAL_ERROR_DATA 40
-#ifdef __KVM_HAVE_VCPU_EVENTS
-#define KVM_CAP_VCPU_EVENTS 41
-#endif
-#define KVM_CAP_S390_PSW 42
-#define KVM_CAP_PPC_SEGSTATE 43
-#define KVM_CAP_HYPERV 44
-#define KVM_CAP_HYPERV_VAPIC 45
-#define KVM_CAP_HYPERV_SPIN 46
-#define KVM_CAP_PCI_SEGMENT 47
-#define KVM_CAP_PPC_PAIRED_SINGLES 48
-#define KVM_CAP_INTR_SHADOW 49
-#ifdef __KVM_HAVE_DEBUGREGS
-#define KVM_CAP_DEBUGREGS 50
-#endif
-#define KVM_CAP_X86_ROBUST_SINGLESTEP 51
-#define KVM_CAP_PPC_OSI 52
-#define KVM_CAP_PPC_UNSET_IRQ 53
-#define KVM_CAP_ENABLE_CAP 54
-#ifdef __KVM_HAVE_XSAVE
-#define KVM_CAP_XSAVE 55
-#endif
-#ifdef __KVM_HAVE_XCRS
-#define KVM_CAP_XCRS 56
-#endif
-#define KVM_CAP_PPC_GET_PVINFO 57
-#define KVM_CAP_PPC_IRQ_LEVEL 58
-#define KVM_CAP_ASYNC_PF 59
-#define KVM_CAP_TSC_CONTROL 60
-#define KVM_CAP_GET_TSC_KHZ 61
-#define KVM_CAP_PPC_BOOKE_SREGS 62
-#define KVM_CAP_SPAPR_TCE 63
-#define KVM_CAP_PPC_SMT 64
-#define KVM_CAP_PPC_RMA	65
-#define KVM_CAP_MAX_VCPUS 66       /* returns max vcpus per vm */
-#define KVM_CAP_PPC_HIOR 67
-#define KVM_CAP_PPC_PAPR 68
-#define KVM_CAP_SW_TLB 69
-#define KVM_CAP_ONE_REG 70
-#define KVM_CAP_S390_GMAP 71
-#define KVM_CAP_TSC_DEADLINE_TIMER 72
-#define KVM_CAP_S390_UCONTROL 73
-#define KVM_CAP_SYNC_REGS 74
-#define KVM_CAP_PCI_2_3 75
-
-#ifdef KVM_CAP_IRQ_ROUTING
-
-struct kvm_irq_routing_irqchip {
-	__u32 irqchip;
-	__u32 pin;
-};
-
-struct kvm_irq_routing_msi {
-	__u32 address_lo;
-	__u32 address_hi;
-	__u32 data;
-	__u32 pad;
-};
-
-/* gsi routing entry types */
-#define KVM_IRQ_ROUTING_IRQCHIP 1
-#define KVM_IRQ_ROUTING_MSI 2
-
-struct kvm_irq_routing_entry {
-	__u32 gsi;
-	__u32 type;
-	__u32 flags;
-	__u32 pad;
-	union {
-		struct kvm_irq_routing_irqchip irqchip;
-		struct kvm_irq_routing_msi msi;
-		__u32 pad[8];
-	} u;
-};
-
-struct kvm_irq_routing {
-	__u32 nr;
-	__u32 flags;
-	struct kvm_irq_routing_entry entries[0];
-};
-
-#endif
-
-#ifdef KVM_CAP_MCE
-/* x86 MCE */
-struct kvm_x86_mce {
-	__u64 status;
-	__u64 addr;
-	__u64 misc;
-	__u64 mcg_status;
-	__u8 bank;
-	__u8 pad1[7];
-	__u64 pad2[3];
-};
-#endif
-
-#ifdef KVM_CAP_XEN_HVM
-struct kvm_xen_hvm_config {
-	__u32 flags;
-	__u32 msr;
-	__u64 blob_addr_32;
-	__u64 blob_addr_64;
-	__u8 blob_size_32;
-	__u8 blob_size_64;
-	__u8 pad2[30];
-};
-#endif
-
-#define KVM_IRQFD_FLAG_DEASSIGN (1 << 0)
-
-struct kvm_irqfd {
-	__u32 fd;
-	__u32 gsi;
-	__u32 flags;
-	__u8  pad[20];
-};
-
-struct kvm_clock_data {
-	__u64 clock;
-	__u32 flags;
-	__u32 pad[9];
-};
-
-#define KVM_MMU_FSL_BOOKE_NOHV		0
-#define KVM_MMU_FSL_BOOKE_HV		1
-
-struct kvm_config_tlb {
-	__u64 params;
-	__u64 array;
-	__u32 mmu_type;
-	__u32 array_len;
-};
-
-struct kvm_dirty_tlb {
-	__u64 bitmap;
-	__u32 num_dirty;
-};
-
-/* Available with KVM_CAP_ONE_REG */
-
-#define KVM_REG_ARCH_MASK	0xff00000000000000ULL
-#define KVM_REG_GENERIC		0x0000000000000000ULL
-
-/*
- * Architecture specific registers are to be defined in arch headers and
- * ORed with the arch identifier.
- */
-#define KVM_REG_PPC		0x1000000000000000ULL
-#define KVM_REG_X86		0x2000000000000000ULL
-#define KVM_REG_IA64		0x3000000000000000ULL
-#define KVM_REG_ARM		0x4000000000000000ULL
-#define KVM_REG_S390		0x5000000000000000ULL
-
-#define KVM_REG_SIZE_SHIFT	52
-#define KVM_REG_SIZE_MASK	0x00f0000000000000ULL
-#define KVM_REG_SIZE_U8		0x0000000000000000ULL
-#define KVM_REG_SIZE_U16	0x0010000000000000ULL
-#define KVM_REG_SIZE_U32	0x0020000000000000ULL
-#define KVM_REG_SIZE_U64	0x0030000000000000ULL
-#define KVM_REG_SIZE_U128	0x0040000000000000ULL
-#define KVM_REG_SIZE_U256	0x0050000000000000ULL
-#define KVM_REG_SIZE_U512	0x0060000000000000ULL
-#define KVM_REG_SIZE_U1024	0x0070000000000000ULL
-
-struct kvm_one_reg {
-	__u64 id;
-	__u64 addr;
-};
-
-/*
- * ioctls for VM fds
- */
-#define KVM_SET_MEMORY_REGION     _IOW(KVMIO,  0x40, struct kvm_memory_region)
-/*
- * KVM_CREATE_VCPU receives as a parameter the vcpu slot, and returns
- * a vcpu fd.
- */
-#define KVM_CREATE_VCPU           _IO(KVMIO,   0x41)
-#define KVM_GET_DIRTY_LOG         _IOW(KVMIO,  0x42, struct kvm_dirty_log)
-/* KVM_SET_MEMORY_ALIAS is obsolete: */
-#define KVM_SET_MEMORY_ALIAS      _IOW(KVMIO,  0x43, struct kvm_memory_alias)
-#define KVM_SET_NR_MMU_PAGES      _IO(KVMIO,   0x44)
-#define KVM_GET_NR_MMU_PAGES      _IO(KVMIO,   0x45)
-#define KVM_SET_USER_MEMORY_REGION _IOW(KVMIO, 0x46, \
-					struct kvm_userspace_memory_region)
-#define KVM_SET_TSS_ADDR          _IO(KVMIO,   0x47)
-#define KVM_SET_IDENTITY_MAP_ADDR _IOW(KVMIO,  0x48, __u64)
-
-/* enable ucontrol for s390 */
-struct kvm_s390_ucas_mapping {
-	__u64 user_addr;
-	__u64 vcpu_addr;
-	__u64 length;
-};
-#define KVM_S390_UCAS_MAP        _IOW(KVMIO, 0x50, struct kvm_s390_ucas_mapping)
-#define KVM_S390_UCAS_UNMAP      _IOW(KVMIO, 0x51, struct kvm_s390_ucas_mapping)
-#define KVM_S390_VCPU_FAULT	 _IOW(KVMIO, 0x52, unsigned long)
-
-/* Device model IOC */
-#define KVM_CREATE_IRQCHIP        _IO(KVMIO,   0x60)
-#define KVM_IRQ_LINE              _IOW(KVMIO,  0x61, struct kvm_irq_level)
-#define KVM_GET_IRQCHIP           _IOWR(KVMIO, 0x62, struct kvm_irqchip)
-#define KVM_SET_IRQCHIP           _IOR(KVMIO,  0x63, struct kvm_irqchip)
-#define KVM_CREATE_PIT            _IO(KVMIO,   0x64)
-#define KVM_GET_PIT               _IOWR(KVMIO, 0x65, struct kvm_pit_state)
-#define KVM_SET_PIT               _IOR(KVMIO,  0x66, struct kvm_pit_state)
-#define KVM_IRQ_LINE_STATUS       _IOWR(KVMIO, 0x67, struct kvm_irq_level)
-#define KVM_REGISTER_COALESCED_MMIO \
-			_IOW(KVMIO,  0x67, struct kvm_coalesced_mmio_zone)
-#define KVM_UNREGISTER_COALESCED_MMIO \
-			_IOW(KVMIO,  0x68, struct kvm_coalesced_mmio_zone)
-#define KVM_ASSIGN_PCI_DEVICE     _IOR(KVMIO,  0x69, \
-				       struct kvm_assigned_pci_dev)
-#define KVM_SET_GSI_ROUTING       _IOW(KVMIO,  0x6a, struct kvm_irq_routing)
-/* deprecated, replaced by KVM_ASSIGN_DEV_IRQ */
-#define KVM_ASSIGN_IRQ            __KVM_DEPRECATED_VM_R_0x70
-#define KVM_ASSIGN_DEV_IRQ        _IOW(KVMIO,  0x70, struct kvm_assigned_irq)
-#define KVM_REINJECT_CONTROL      _IO(KVMIO,   0x71)
-#define KVM_DEASSIGN_PCI_DEVICE   _IOW(KVMIO,  0x72, \
-				       struct kvm_assigned_pci_dev)
-#define KVM_ASSIGN_SET_MSIX_NR    _IOW(KVMIO,  0x73, \
-				       struct kvm_assigned_msix_nr)
-#define KVM_ASSIGN_SET_MSIX_ENTRY _IOW(KVMIO,  0x74, \
-				       struct kvm_assigned_msix_entry)
-#define KVM_DEASSIGN_DEV_IRQ      _IOW(KVMIO,  0x75, struct kvm_assigned_irq)
-#define KVM_IRQFD                 _IOW(KVMIO,  0x76, struct kvm_irqfd)
-#define KVM_CREATE_PIT2		  _IOW(KVMIO,  0x77, struct kvm_pit_config)
-#define KVM_SET_BOOT_CPU_ID       _IO(KVMIO,   0x78)
-#define KVM_IOEVENTFD             _IOW(KVMIO,  0x79, struct kvm_ioeventfd)
-#define KVM_XEN_HVM_CONFIG        _IOW(KVMIO,  0x7a, struct kvm_xen_hvm_config)
-#define KVM_SET_CLOCK             _IOW(KVMIO,  0x7b, struct kvm_clock_data)
-#define KVM_GET_CLOCK             _IOR(KVMIO,  0x7c, struct kvm_clock_data)
-/* Available with KVM_CAP_PIT_STATE2 */
-#define KVM_GET_PIT2              _IOR(KVMIO,  0x9f, struct kvm_pit_state2)
-#define KVM_SET_PIT2              _IOW(KVMIO,  0xa0, struct kvm_pit_state2)
-/* Available with KVM_CAP_PPC_GET_PVINFO */
-#define KVM_PPC_GET_PVINFO	  _IOW(KVMIO,  0xa1, struct kvm_ppc_pvinfo)
-/* Available with KVM_CAP_TSC_CONTROL */
-#define KVM_SET_TSC_KHZ           _IO(KVMIO,  0xa2)
-#define KVM_GET_TSC_KHZ           _IO(KVMIO,  0xa3)
-/* Available with KVM_CAP_PCI_2_3 */
-#define KVM_ASSIGN_SET_INTX_MASK  _IOW(KVMIO,  0xa4, \
-				       struct kvm_assigned_pci_dev)
-
-/*
- * ioctls for vcpu fds
- */
-#define KVM_RUN                   _IO(KVMIO,   0x80)
-#define KVM_GET_REGS              _IOR(KVMIO,  0x81, struct kvm_regs)
-#define KVM_SET_REGS              _IOW(KVMIO,  0x82, struct kvm_regs)
-#define KVM_GET_SREGS             _IOR(KVMIO,  0x83, struct kvm_sregs)
-#define KVM_SET_SREGS             _IOW(KVMIO,  0x84, struct kvm_sregs)
-#define KVM_TRANSLATE             _IOWR(KVMIO, 0x85, struct kvm_translation)
-#define KVM_INTERRUPT             _IOW(KVMIO,  0x86, struct kvm_interrupt)
-/* KVM_DEBUG_GUEST is no longer supported, use KVM_SET_GUEST_DEBUG instead */
-#define KVM_DEBUG_GUEST           __KVM_DEPRECATED_VCPU_W_0x87
-#define KVM_GET_MSRS              _IOWR(KVMIO, 0x88, struct kvm_msrs)
-#define KVM_SET_MSRS              _IOW(KVMIO,  0x89, struct kvm_msrs)
-#define KVM_SET_CPUID             _IOW(KVMIO,  0x8a, struct kvm_cpuid)
-#define KVM_SET_SIGNAL_MASK       _IOW(KVMIO,  0x8b, struct kvm_signal_mask)
-#define KVM_GET_FPU               _IOR(KVMIO,  0x8c, struct kvm_fpu)
-#define KVM_SET_FPU               _IOW(KVMIO,  0x8d, struct kvm_fpu)
-#define KVM_GET_LAPIC             _IOR(KVMIO,  0x8e, struct kvm_lapic_state)
-#define KVM_SET_LAPIC             _IOW(KVMIO,  0x8f, struct kvm_lapic_state)
-#define KVM_SET_CPUID2            _IOW(KVMIO,  0x90, struct kvm_cpuid2)
-#define KVM_GET_CPUID2            _IOWR(KVMIO, 0x91, struct kvm_cpuid2)
-/* Available with KVM_CAP_VAPIC */
-#define KVM_TPR_ACCESS_REPORTING  _IOWR(KVMIO, 0x92, struct kvm_tpr_access_ctl)
-/* Available with KVM_CAP_VAPIC */
-#define KVM_SET_VAPIC_ADDR        _IOW(KVMIO,  0x93, struct kvm_vapic_addr)
-/* valid for virtual machine (for floating interrupt)_and_ vcpu */
-#define KVM_S390_INTERRUPT        _IOW(KVMIO,  0x94, struct kvm_s390_interrupt)
-/* store status for s390 */
-#define KVM_S390_STORE_STATUS_NOADDR    (-1ul)
-#define KVM_S390_STORE_STATUS_PREFIXED  (-2ul)
-#define KVM_S390_STORE_STATUS	  _IOW(KVMIO,  0x95, unsigned long)
-/* initial ipl psw for s390 */
-#define KVM_S390_SET_INITIAL_PSW  _IOW(KVMIO,  0x96, struct kvm_s390_psw)
-/* initial reset for s390 */
-#define KVM_S390_INITIAL_RESET    _IO(KVMIO,   0x97)
-#define KVM_GET_MP_STATE          _IOR(KVMIO,  0x98, struct kvm_mp_state)
-#define KVM_SET_MP_STATE          _IOW(KVMIO,  0x99, struct kvm_mp_state)
-/* Available with KVM_CAP_NMI */
-#define KVM_NMI                   _IO(KVMIO,   0x9a)
-/* Available with KVM_CAP_SET_GUEST_DEBUG */
-#define KVM_SET_GUEST_DEBUG       _IOW(KVMIO,  0x9b, struct kvm_guest_debug)
-/* MCE for x86 */
-#define KVM_X86_SETUP_MCE         _IOW(KVMIO,  0x9c, __u64)
-#define KVM_X86_GET_MCE_CAP_SUPPORTED _IOR(KVMIO,  0x9d, __u64)
-#define KVM_X86_SET_MCE           _IOW(KVMIO,  0x9e, struct kvm_x86_mce)
-/* IA64 stack access */
-#define KVM_IA64_VCPU_GET_STACK   _IOR(KVMIO,  0x9a, void *)
-#define KVM_IA64_VCPU_SET_STACK   _IOW(KVMIO,  0x9b, void *)
-/* Available with KVM_CAP_VCPU_EVENTS */
-#define KVM_GET_VCPU_EVENTS       _IOR(KVMIO,  0x9f, struct kvm_vcpu_events)
-#define KVM_SET_VCPU_EVENTS       _IOW(KVMIO,  0xa0, struct kvm_vcpu_events)
-/* Available with KVM_CAP_DEBUGREGS */
-#define KVM_GET_DEBUGREGS         _IOR(KVMIO,  0xa1, struct kvm_debugregs)
-#define KVM_SET_DEBUGREGS         _IOW(KVMIO,  0xa2, struct kvm_debugregs)
-#define KVM_ENABLE_CAP            _IOW(KVMIO,  0xa3, struct kvm_enable_cap)
-/* Available with KVM_CAP_XSAVE */
-#define KVM_GET_XSAVE		  _IOR(KVMIO,  0xa4, struct kvm_xsave)
-#define KVM_SET_XSAVE		  _IOW(KVMIO,  0xa5, struct kvm_xsave)
-/* Available with KVM_CAP_XCRS */
-#define KVM_GET_XCRS		  _IOR(KVMIO,  0xa6, struct kvm_xcrs)
-#define KVM_SET_XCRS		  _IOW(KVMIO,  0xa7, struct kvm_xcrs)
-#define KVM_CREATE_SPAPR_TCE	  _IOW(KVMIO,  0xa8, struct kvm_create_spapr_tce)
-/* Available with KVM_CAP_RMA */
-#define KVM_ALLOCATE_RMA	  _IOR(KVMIO,  0xa9, struct kvm_allocate_rma)
-/* Available with KVM_CAP_SW_TLB */
-#define KVM_DIRTY_TLB		  _IOW(KVMIO,  0xaa, struct kvm_dirty_tlb)
-/* Available with KVM_CAP_ONE_REG */
-#define KVM_GET_ONE_REG		  _IOW(KVMIO,  0xab, struct kvm_one_reg)
-#define KVM_SET_ONE_REG		  _IOW(KVMIO,  0xac, struct kvm_one_reg)
-
-#define KVM_DEV_ASSIGN_ENABLE_IOMMU	(1 << 0)
-#define KVM_DEV_ASSIGN_PCI_2_3		(1 << 1)
-#define KVM_DEV_ASSIGN_MASK_INTX	(1 << 2)
-
-struct kvm_assigned_pci_dev {
-	__u32 assigned_dev_id;
-	__u32 busnr;
-	__u32 devfn;
-	__u32 flags;
-	__u32 segnr;
-	union {
-		__u32 reserved[11];
-	};
-};
-
-#define KVM_DEV_IRQ_HOST_INTX    (1 << 0)
-#define KVM_DEV_IRQ_HOST_MSI     (1 << 1)
-#define KVM_DEV_IRQ_HOST_MSIX    (1 << 2)
-
-#define KVM_DEV_IRQ_GUEST_INTX   (1 << 8)
-#define KVM_DEV_IRQ_GUEST_MSI    (1 << 9)
-#define KVM_DEV_IRQ_GUEST_MSIX   (1 << 10)
-
-#define KVM_DEV_IRQ_HOST_MASK	 0x00ff
-#define KVM_DEV_IRQ_GUEST_MASK   0xff00
-
-struct kvm_assigned_irq {
-	__u32 assigned_dev_id;
-	__u32 host_irq; /* ignored (legacy field) */
-	__u32 guest_irq;
-	__u32 flags;
-	union {
-		__u32 reserved[12];
-	};
-};
-
-struct kvm_assigned_msix_nr {
-	__u32 assigned_dev_id;
-	__u16 entry_nr;
-	__u16 padding;
-};
-
-#define KVM_MAX_MSIX_PER_DEV		256
-struct kvm_assigned_msix_entry {
-	__u32 assigned_dev_id;
-	__u32 gsi;
-	__u16 entry; /* The index of entry in the MSI-X table */
-	__u16 padding[3];
-};
-
-#endif /* __LINUX_KVM_H */
diff --git a/ANDROID_3.4.5/include/linux/kvm_host.h b/ANDROID_3.4.5/include/linux/kvm_host.h
deleted file mode 100644
index 72cbf08d..00000000
--- a/ANDROID_3.4.5/include/linux/kvm_host.h
+++ /dev/null
@@ -1,857 +0,0 @@
-#ifndef __KVM_HOST_H
-#define __KVM_HOST_H
-
-/*
- * This work is licensed under the terms of the GNU GPL, version 2.  See
- * the COPYING file in the top-level directory.
- */
-
-#include <linux/types.h>
-#include <linux/hardirq.h>
-#include <linux/list.h>
-#include <linux/mutex.h>
-#include <linux/spinlock.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/bug.h>
-#include <linux/mm.h>
-#include <linux/mmu_notifier.h>
-#include <linux/preempt.h>
-#include <linux/msi.h>
-#include <linux/slab.h>
-#include <linux/rcupdate.h>
-#include <linux/ratelimit.h>
-#include <asm/signal.h>
-
-#include <linux/kvm.h>
-#include <linux/kvm_para.h>
-
-#include <linux/kvm_types.h>
-
-#include <asm/kvm_host.h>
-
-#ifndef KVM_MMIO_SIZE
-#define KVM_MMIO_SIZE 8
-#endif
-
-/*
- * vcpu->requests bit members
- */
-#define KVM_REQ_TLB_FLUSH          0
-#define KVM_REQ_MIGRATE_TIMER      1
-#define KVM_REQ_REPORT_TPR_ACCESS  2
-#define KVM_REQ_MMU_RELOAD         3
-#define KVM_REQ_TRIPLE_FAULT       4
-#define KVM_REQ_PENDING_TIMER      5
-#define KVM_REQ_UNHALT             6
-#define KVM_REQ_MMU_SYNC           7
-#define KVM_REQ_CLOCK_UPDATE       8
-#define KVM_REQ_KICK               9
-#define KVM_REQ_DEACTIVATE_FPU    10
-#define KVM_REQ_EVENT             11
-#define KVM_REQ_APF_HALT          12
-#define KVM_REQ_STEAL_UPDATE      13
-#define KVM_REQ_NMI               14
-#define KVM_REQ_IMMEDIATE_EXIT    15
-#define KVM_REQ_PMU               16
-#define KVM_REQ_PMI               17
-
-#define KVM_USERSPACE_IRQ_SOURCE_ID	0
-
-struct kvm;
-struct kvm_vcpu;
-extern struct kmem_cache *kvm_vcpu_cache;
-
-struct kvm_io_range {
-	gpa_t addr;
-	int len;
-	struct kvm_io_device *dev;
-};
-
-struct kvm_io_bus {
-	int                   dev_count;
-#define NR_IOBUS_DEVS 300
-	struct kvm_io_range range[NR_IOBUS_DEVS];
-};
-
-enum kvm_bus {
-	KVM_MMIO_BUS,
-	KVM_PIO_BUS,
-	KVM_NR_BUSES
-};
-
-int kvm_io_bus_write(struct kvm *kvm, enum kvm_bus bus_idx, gpa_t addr,
-		     int len, const void *val);
-int kvm_io_bus_read(struct kvm *kvm, enum kvm_bus bus_idx, gpa_t addr, int len,
-		    void *val);
-int kvm_io_bus_register_dev(struct kvm *kvm, enum kvm_bus bus_idx, gpa_t addr,
-			    int len, struct kvm_io_device *dev);
-int kvm_io_bus_unregister_dev(struct kvm *kvm, enum kvm_bus bus_idx,
-			      struct kvm_io_device *dev);
-
-#ifdef CONFIG_KVM_ASYNC_PF
-struct kvm_async_pf {
-	struct work_struct work;
-	struct list_head link;
-	struct list_head queue;
-	struct kvm_vcpu *vcpu;
-	struct mm_struct *mm;
-	gva_t gva;
-	unsigned long addr;
-	struct kvm_arch_async_pf arch;
-	struct page *page;
-	bool done;
-};
-
-void kvm_clear_async_pf_completion_queue(struct kvm_vcpu *vcpu);
-void kvm_check_async_pf_completion(struct kvm_vcpu *vcpu);
-int kvm_setup_async_pf(struct kvm_vcpu *vcpu, gva_t gva, gfn_t gfn,
-		       struct kvm_arch_async_pf *arch);
-int kvm_async_pf_wakeup_all(struct kvm_vcpu *vcpu);
-#endif
-
-enum {
-	OUTSIDE_GUEST_MODE,
-	IN_GUEST_MODE,
-	EXITING_GUEST_MODE
-};
-
-struct kvm_vcpu {
-	struct kvm *kvm;
-#ifdef CONFIG_PREEMPT_NOTIFIERS
-	struct preempt_notifier preempt_notifier;
-#endif
-	int cpu;
-	int vcpu_id;
-	int srcu_idx;
-	int mode;
-	unsigned long requests;
-	unsigned long guest_debug;
-
-	struct mutex mutex;
-	struct kvm_run *run;
-
-	int fpu_active;
-	int guest_fpu_loaded, guest_xcr0_loaded;
-	wait_queue_head_t wq;
-	struct pid *pid;
-	int sigset_active;
-	sigset_t sigset;
-	struct kvm_vcpu_stat stat;
-
-#ifdef CONFIG_HAS_IOMEM
-	int mmio_needed;
-	int mmio_read_completed;
-	int mmio_is_write;
-	int mmio_size;
-	int mmio_index;
-	unsigned char mmio_data[KVM_MMIO_SIZE];
-	gpa_t mmio_phys_addr;
-#endif
-
-#ifdef CONFIG_KVM_ASYNC_PF
-	struct {
-		u32 queued;
-		struct list_head queue;
-		struct list_head done;
-		spinlock_t lock;
-	} async_pf;
-#endif
-
-	struct kvm_vcpu_arch arch;
-};
-
-static inline int kvm_vcpu_exiting_guest_mode(struct kvm_vcpu *vcpu)
-{
-	return cmpxchg(&vcpu->mode, IN_GUEST_MODE, EXITING_GUEST_MODE);
-}
-
-/*
- * Some of the bitops functions do not support too long bitmaps.
- * This number must be determined not to exceed such limits.
- */
-#define KVM_MEM_MAX_NR_PAGES ((1UL << 31) - 1)
-
-struct kvm_memory_slot {
-	gfn_t base_gfn;
-	unsigned long npages;
-	unsigned long flags;
-	unsigned long *rmap;
-	unsigned long *dirty_bitmap;
-	unsigned long *dirty_bitmap_head;
-	unsigned long nr_dirty_pages;
-	struct kvm_arch_memory_slot arch;
-	unsigned long userspace_addr;
-	int user_alloc;
-	int id;
-};
-
-static inline unsigned long kvm_dirty_bitmap_bytes(struct kvm_memory_slot *memslot)
-{
-	return ALIGN(memslot->npages, BITS_PER_LONG) / 8;
-}
-
-struct kvm_kernel_irq_routing_entry {
-	u32 gsi;
-	u32 type;
-	int (*set)(struct kvm_kernel_irq_routing_entry *e,
-		   struct kvm *kvm, int irq_source_id, int level);
-	union {
-		struct {
-			unsigned irqchip;
-			unsigned pin;
-		} irqchip;
-		struct msi_msg msi;
-	};
-	struct hlist_node link;
-};
-
-#ifdef __KVM_HAVE_IOAPIC
-
-struct kvm_irq_routing_table {
-	int chip[KVM_NR_IRQCHIPS][KVM_IOAPIC_NUM_PINS];
-	struct kvm_kernel_irq_routing_entry *rt_entries;
-	u32 nr_rt_entries;
-	/*
-	 * Array indexed by gsi. Each entry contains list of irq chips
-	 * the gsi is connected to.
-	 */
-	struct hlist_head map[0];
-};
-
-#else
-
-struct kvm_irq_routing_table {};
-
-#endif
-
-#ifndef KVM_MEM_SLOTS_NUM
-#define KVM_MEM_SLOTS_NUM (KVM_MEMORY_SLOTS + KVM_PRIVATE_MEM_SLOTS)
-#endif
-
-/*
- * Note:
- * memslots are not sorted by id anymore, please use id_to_memslot()
- * to get the memslot by its id.
- */
-struct kvm_memslots {
-	u64 generation;
-	struct kvm_memory_slot memslots[KVM_MEM_SLOTS_NUM];
-	/* The mapping table from slot id to the index in memslots[]. */
-	int id_to_index[KVM_MEM_SLOTS_NUM];
-};
-
-struct kvm {
-	spinlock_t mmu_lock;
-	struct mutex slots_lock;
-	struct mm_struct *mm; /* userspace tied to this vm */
-	struct kvm_memslots *memslots;
-	struct srcu_struct srcu;
-#ifdef CONFIG_KVM_APIC_ARCHITECTURE
-	u32 bsp_vcpu_id;
-#endif
-	struct kvm_vcpu *vcpus[KVM_MAX_VCPUS];
-	atomic_t online_vcpus;
-	int last_boosted_vcpu;
-	struct list_head vm_list;
-	struct mutex lock;
-	struct kvm_io_bus *buses[KVM_NR_BUSES];
-#ifdef CONFIG_HAVE_KVM_EVENTFD
-	struct {
-		spinlock_t        lock;
-		struct list_head  items;
-	} irqfds;
-	struct list_head ioeventfds;
-#endif
-	struct kvm_vm_stat stat;
-	struct kvm_arch arch;
-	atomic_t users_count;
-#ifdef KVM_COALESCED_MMIO_PAGE_OFFSET
-	struct kvm_coalesced_mmio_ring *coalesced_mmio_ring;
-	spinlock_t ring_lock;
-	struct list_head coalesced_zones;
-#endif
-
-	struct mutex irq_lock;
-#ifdef CONFIG_HAVE_KVM_IRQCHIP
-	/*
-	 * Update side is protected by irq_lock and,
-	 * if configured, irqfds.lock.
-	 */
-	struct kvm_irq_routing_table __rcu *irq_routing;
-	struct hlist_head mask_notifier_list;
-	struct hlist_head irq_ack_notifier_list;
-#endif
-
-#ifdef KVM_ARCH_WANT_MMU_NOTIFIER
-	struct mmu_notifier mmu_notifier;
-	unsigned long mmu_notifier_seq;
-	long mmu_notifier_count;
-#endif
-	long tlbs_dirty;
-};
-
-/* The guest did something we don't support. */
-#define pr_unimpl(vcpu, fmt, ...)					\
-	pr_err_ratelimited("kvm: %i: cpu%i " fmt,			\
-			   current->tgid, (vcpu)->vcpu_id , ## __VA_ARGS__)
-
-#define kvm_printf(kvm, fmt ...) printk(KERN_DEBUG fmt)
-#define vcpu_printf(vcpu, fmt...) kvm_printf(vcpu->kvm, fmt)
-
-static inline struct kvm_vcpu *kvm_get_vcpu(struct kvm *kvm, int i)
-{
-	smp_rmb();
-	return kvm->vcpus[i];
-}
-
-#define kvm_for_each_vcpu(idx, vcpup, kvm) \
-	for (idx = 0; \
-	     idx < atomic_read(&kvm->online_vcpus) && \
-	     (vcpup = kvm_get_vcpu(kvm, idx)) != NULL; \
-	     idx++)
-
-#define kvm_for_each_memslot(memslot, slots)	\
-	for (memslot = &slots->memslots[0];	\
-	      memslot < slots->memslots + KVM_MEM_SLOTS_NUM && memslot->npages;\
-		memslot++)
-
-int kvm_vcpu_init(struct kvm_vcpu *vcpu, struct kvm *kvm, unsigned id);
-void kvm_vcpu_uninit(struct kvm_vcpu *vcpu);
-
-void vcpu_load(struct kvm_vcpu *vcpu);
-void vcpu_put(struct kvm_vcpu *vcpu);
-
-int kvm_init(void *opaque, unsigned vcpu_size, unsigned vcpu_align,
-		  struct module *module);
-void kvm_exit(void);
-
-void kvm_get_kvm(struct kvm *kvm);
-void kvm_put_kvm(struct kvm *kvm);
-void update_memslots(struct kvm_memslots *slots, struct kvm_memory_slot *new);
-
-static inline struct kvm_memslots *kvm_memslots(struct kvm *kvm)
-{
-	return rcu_dereference_check(kvm->memslots,
-			srcu_read_lock_held(&kvm->srcu)
-			|| lockdep_is_held(&kvm->slots_lock));
-}
-
-static inline struct kvm_memory_slot *
-id_to_memslot(struct kvm_memslots *slots, int id)
-{
-	int index = slots->id_to_index[id];
-	struct kvm_memory_slot *slot;
-
-	slot = &slots->memslots[index];
-
-	WARN_ON(slot->id != id);
-	return slot;
-}
-
-#define HPA_MSB ((sizeof(hpa_t) * 8) - 1)
-#define HPA_ERR_MASK ((hpa_t)1 << HPA_MSB)
-static inline int is_error_hpa(hpa_t hpa) { return hpa >> HPA_MSB; }
-
-extern struct page *bad_page;
-extern struct page *fault_page;
-
-extern pfn_t bad_pfn;
-extern pfn_t fault_pfn;
-
-int is_error_page(struct page *page);
-int is_error_pfn(pfn_t pfn);
-int is_hwpoison_pfn(pfn_t pfn);
-int is_fault_pfn(pfn_t pfn);
-int is_noslot_pfn(pfn_t pfn);
-int is_invalid_pfn(pfn_t pfn);
-int kvm_is_error_hva(unsigned long addr);
-int kvm_set_memory_region(struct kvm *kvm,
-			  struct kvm_userspace_memory_region *mem,
-			  int user_alloc);
-int __kvm_set_memory_region(struct kvm *kvm,
-			    struct kvm_userspace_memory_region *mem,
-			    int user_alloc);
-void kvm_arch_free_memslot(struct kvm_memory_slot *free,
-			   struct kvm_memory_slot *dont);
-int kvm_arch_create_memslot(struct kvm_memory_slot *slot, unsigned long npages);
-int kvm_arch_prepare_memory_region(struct kvm *kvm,
-				struct kvm_memory_slot *memslot,
-				struct kvm_memory_slot old,
-				struct kvm_userspace_memory_region *mem,
-				int user_alloc);
-void kvm_arch_commit_memory_region(struct kvm *kvm,
-				struct kvm_userspace_memory_region *mem,
-				struct kvm_memory_slot old,
-				int user_alloc);
-bool kvm_largepages_enabled(void);
-void kvm_disable_largepages(void);
-void kvm_arch_flush_shadow(struct kvm *kvm);
-
-int gfn_to_page_many_atomic(struct kvm *kvm, gfn_t gfn, struct page **pages,
-			    int nr_pages);
-
-struct page *gfn_to_page(struct kvm *kvm, gfn_t gfn);
-unsigned long gfn_to_hva(struct kvm *kvm, gfn_t gfn);
-void kvm_release_page_clean(struct page *page);
-void kvm_release_page_dirty(struct page *page);
-void kvm_set_page_dirty(struct page *page);
-void kvm_set_page_accessed(struct page *page);
-
-pfn_t hva_to_pfn_atomic(struct kvm *kvm, unsigned long addr);
-pfn_t gfn_to_pfn_atomic(struct kvm *kvm, gfn_t gfn);
-pfn_t gfn_to_pfn_async(struct kvm *kvm, gfn_t gfn, bool *async,
-		       bool write_fault, bool *writable);
-pfn_t gfn_to_pfn(struct kvm *kvm, gfn_t gfn);
-pfn_t gfn_to_pfn_prot(struct kvm *kvm, gfn_t gfn, bool write_fault,
-		      bool *writable);
-pfn_t gfn_to_pfn_memslot(struct kvm *kvm,
-			 struct kvm_memory_slot *slot, gfn_t gfn);
-void kvm_release_pfn_dirty(pfn_t);
-void kvm_release_pfn_clean(pfn_t pfn);
-void kvm_set_pfn_dirty(pfn_t pfn);
-void kvm_set_pfn_accessed(pfn_t pfn);
-void kvm_get_pfn(pfn_t pfn);
-
-int kvm_read_guest_page(struct kvm *kvm, gfn_t gfn, void *data, int offset,
-			int len);
-int kvm_read_guest_atomic(struct kvm *kvm, gpa_t gpa, void *data,
-			  unsigned long len);
-int kvm_read_guest(struct kvm *kvm, gpa_t gpa, void *data, unsigned long len);
-int kvm_read_guest_cached(struct kvm *kvm, struct gfn_to_hva_cache *ghc,
-			   void *data, unsigned long len);
-int kvm_write_guest_page(struct kvm *kvm, gfn_t gfn, const void *data,
-			 int offset, int len);
-int kvm_write_guest(struct kvm *kvm, gpa_t gpa, const void *data,
-		    unsigned long len);
-int kvm_write_guest_cached(struct kvm *kvm, struct gfn_to_hva_cache *ghc,
-			   void *data, unsigned long len);
-int kvm_gfn_to_hva_cache_init(struct kvm *kvm, struct gfn_to_hva_cache *ghc,
-			      gpa_t gpa);
-int kvm_clear_guest_page(struct kvm *kvm, gfn_t gfn, int offset, int len);
-int kvm_clear_guest(struct kvm *kvm, gpa_t gpa, unsigned long len);
-struct kvm_memory_slot *gfn_to_memslot(struct kvm *kvm, gfn_t gfn);
-int kvm_is_visible_gfn(struct kvm *kvm, gfn_t gfn);
-unsigned long kvm_host_page_size(struct kvm *kvm, gfn_t gfn);
-void mark_page_dirty(struct kvm *kvm, gfn_t gfn);
-void mark_page_dirty_in_slot(struct kvm *kvm, struct kvm_memory_slot *memslot,
-			     gfn_t gfn);
-
-void kvm_vcpu_block(struct kvm_vcpu *vcpu);
-void kvm_vcpu_on_spin(struct kvm_vcpu *vcpu);
-void kvm_resched(struct kvm_vcpu *vcpu);
-void kvm_load_guest_fpu(struct kvm_vcpu *vcpu);
-void kvm_put_guest_fpu(struct kvm_vcpu *vcpu);
-
-void kvm_flush_remote_tlbs(struct kvm *kvm);
-void kvm_reload_remote_mmus(struct kvm *kvm);
-
-long kvm_arch_dev_ioctl(struct file *filp,
-			unsigned int ioctl, unsigned long arg);
-long kvm_arch_vcpu_ioctl(struct file *filp,
-			 unsigned int ioctl, unsigned long arg);
-int kvm_arch_vcpu_fault(struct kvm_vcpu *vcpu, struct vm_fault *vmf);
-
-int kvm_dev_ioctl_check_extension(long ext);
-
-int kvm_get_dirty_log(struct kvm *kvm,
-			struct kvm_dirty_log *log, int *is_dirty);
-int kvm_vm_ioctl_get_dirty_log(struct kvm *kvm,
-				struct kvm_dirty_log *log);
-
-int kvm_vm_ioctl_set_memory_region(struct kvm *kvm,
-				   struct
-				   kvm_userspace_memory_region *mem,
-				   int user_alloc);
-long kvm_arch_vm_ioctl(struct file *filp,
-		       unsigned int ioctl, unsigned long arg);
-
-int kvm_arch_vcpu_ioctl_get_fpu(struct kvm_vcpu *vcpu, struct kvm_fpu *fpu);
-int kvm_arch_vcpu_ioctl_set_fpu(struct kvm_vcpu *vcpu, struct kvm_fpu *fpu);
-
-int kvm_arch_vcpu_ioctl_translate(struct kvm_vcpu *vcpu,
-				    struct kvm_translation *tr);
-
-int kvm_arch_vcpu_ioctl_get_regs(struct kvm_vcpu *vcpu, struct kvm_regs *regs);
-int kvm_arch_vcpu_ioctl_set_regs(struct kvm_vcpu *vcpu, struct kvm_regs *regs);
-int kvm_arch_vcpu_ioctl_get_sregs(struct kvm_vcpu *vcpu,
-				  struct kvm_sregs *sregs);
-int kvm_arch_vcpu_ioctl_set_sregs(struct kvm_vcpu *vcpu,
-				  struct kvm_sregs *sregs);
-int kvm_arch_vcpu_ioctl_get_mpstate(struct kvm_vcpu *vcpu,
-				    struct kvm_mp_state *mp_state);
-int kvm_arch_vcpu_ioctl_set_mpstate(struct kvm_vcpu *vcpu,
-				    struct kvm_mp_state *mp_state);
-int kvm_arch_vcpu_ioctl_set_guest_debug(struct kvm_vcpu *vcpu,
-					struct kvm_guest_debug *dbg);
-int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run);
-
-int kvm_arch_init(void *opaque);
-void kvm_arch_exit(void);
-
-int kvm_arch_vcpu_init(struct kvm_vcpu *vcpu);
-void kvm_arch_vcpu_uninit(struct kvm_vcpu *vcpu);
-
-void kvm_arch_vcpu_free(struct kvm_vcpu *vcpu);
-void kvm_arch_vcpu_load(struct kvm_vcpu *vcpu, int cpu);
-void kvm_arch_vcpu_put(struct kvm_vcpu *vcpu);
-struct kvm_vcpu *kvm_arch_vcpu_create(struct kvm *kvm, unsigned int id);
-int kvm_arch_vcpu_setup(struct kvm_vcpu *vcpu);
-void kvm_arch_vcpu_destroy(struct kvm_vcpu *vcpu);
-
-int kvm_arch_vcpu_reset(struct kvm_vcpu *vcpu);
-int kvm_arch_hardware_enable(void *garbage);
-void kvm_arch_hardware_disable(void *garbage);
-int kvm_arch_hardware_setup(void);
-void kvm_arch_hardware_unsetup(void);
-void kvm_arch_check_processor_compat(void *rtn);
-int kvm_arch_vcpu_runnable(struct kvm_vcpu *vcpu);
-
-void kvm_free_physmem(struct kvm *kvm);
-
-#ifndef __KVM_HAVE_ARCH_VM_ALLOC
-static inline struct kvm *kvm_arch_alloc_vm(void)
-{
-	return kzalloc(sizeof(struct kvm), GFP_KERNEL);
-}
-
-static inline void kvm_arch_free_vm(struct kvm *kvm)
-{
-	kfree(kvm);
-}
-#endif
-
-int kvm_arch_init_vm(struct kvm *kvm, unsigned long type);
-void kvm_arch_destroy_vm(struct kvm *kvm);
-void kvm_free_all_assigned_devices(struct kvm *kvm);
-void kvm_arch_sync_events(struct kvm *kvm);
-
-int kvm_cpu_has_pending_timer(struct kvm_vcpu *vcpu);
-void kvm_vcpu_kick(struct kvm_vcpu *vcpu);
-
-int kvm_is_mmio_pfn(pfn_t pfn);
-
-struct kvm_irq_ack_notifier {
-	struct hlist_node link;
-	unsigned gsi;
-	void (*irq_acked)(struct kvm_irq_ack_notifier *kian);
-};
-
-struct kvm_assigned_dev_kernel {
-	struct kvm_irq_ack_notifier ack_notifier;
-	struct list_head list;
-	int assigned_dev_id;
-	int host_segnr;
-	int host_busnr;
-	int host_devfn;
-	unsigned int entries_nr;
-	int host_irq;
-	bool host_irq_disabled;
-	bool pci_2_3;
-	struct msix_entry *host_msix_entries;
-	int guest_irq;
-	struct msix_entry *guest_msix_entries;
-	unsigned long irq_requested_type;
-	int irq_source_id;
-	int flags;
-	struct pci_dev *dev;
-	struct kvm *kvm;
-	spinlock_t intx_lock;
-	spinlock_t intx_mask_lock;
-	char irq_name[32];
-	struct pci_saved_state *pci_saved_state;
-};
-
-struct kvm_irq_mask_notifier {
-	void (*func)(struct kvm_irq_mask_notifier *kimn, bool masked);
-	int irq;
-	struct hlist_node link;
-};
-
-void kvm_register_irq_mask_notifier(struct kvm *kvm, int irq,
-				    struct kvm_irq_mask_notifier *kimn);
-void kvm_unregister_irq_mask_notifier(struct kvm *kvm, int irq,
-				      struct kvm_irq_mask_notifier *kimn);
-void kvm_fire_mask_notifiers(struct kvm *kvm, unsigned irqchip, unsigned pin,
-			     bool mask);
-
-#ifdef __KVM_HAVE_IOAPIC
-void kvm_get_intr_delivery_bitmask(struct kvm_ioapic *ioapic,
-				   union kvm_ioapic_redirect_entry *entry,
-				   unsigned long *deliver_bitmask);
-#endif
-int kvm_set_irq(struct kvm *kvm, int irq_source_id, u32 irq, int level);
-int kvm_set_msi(struct kvm_kernel_irq_routing_entry *irq_entry, struct kvm *kvm,
-		int irq_source_id, int level);
-void kvm_notify_acked_irq(struct kvm *kvm, unsigned irqchip, unsigned pin);
-void kvm_register_irq_ack_notifier(struct kvm *kvm,
-				   struct kvm_irq_ack_notifier *kian);
-void kvm_unregister_irq_ack_notifier(struct kvm *kvm,
-				   struct kvm_irq_ack_notifier *kian);
-int kvm_request_irq_source_id(struct kvm *kvm);
-void kvm_free_irq_source_id(struct kvm *kvm, int irq_source_id);
-
-/* For vcpu->arch.iommu_flags */
-#define KVM_IOMMU_CACHE_COHERENCY	0x1
-
-#ifdef CONFIG_IOMMU_API
-int kvm_iommu_map_pages(struct kvm *kvm, struct kvm_memory_slot *slot);
-void kvm_iommu_unmap_pages(struct kvm *kvm, struct kvm_memory_slot *slot);
-int kvm_iommu_map_guest(struct kvm *kvm);
-int kvm_iommu_unmap_guest(struct kvm *kvm);
-int kvm_assign_device(struct kvm *kvm,
-		      struct kvm_assigned_dev_kernel *assigned_dev);
-int kvm_deassign_device(struct kvm *kvm,
-			struct kvm_assigned_dev_kernel *assigned_dev);
-#else /* CONFIG_IOMMU_API */
-static inline int kvm_iommu_map_pages(struct kvm *kvm,
-				      struct kvm_memory_slot *slot)
-{
-	return 0;
-}
-
-static inline void kvm_iommu_unmap_pages(struct kvm *kvm,
-					 struct kvm_memory_slot *slot)
-{
-}
-
-static inline int kvm_iommu_map_guest(struct kvm *kvm)
-{
-	return -ENODEV;
-}
-
-static inline int kvm_iommu_unmap_guest(struct kvm *kvm)
-{
-	return 0;
-}
-
-static inline int kvm_assign_device(struct kvm *kvm,
-		struct kvm_assigned_dev_kernel *assigned_dev)
-{
-	return 0;
-}
-
-static inline int kvm_deassign_device(struct kvm *kvm,
-		struct kvm_assigned_dev_kernel *assigned_dev)
-{
-	return 0;
-}
-#endif /* CONFIG_IOMMU_API */
-
-static inline void kvm_guest_enter(void)
-{
-	BUG_ON(preemptible());
-	account_system_vtime(current);
-	current->flags |= PF_VCPU;
-	/* KVM does not hold any references to rcu protected data when it
-	 * switches CPU into a guest mode. In fact switching to a guest mode
-	 * is very similar to exiting to userspase from rcu point of view. In
-	 * addition CPU may stay in a guest mode for quite a long time (up to
-	 * one time slice). Lets treat guest mode as quiescent state, just like
-	 * we do with user-mode execution.
-	 */
-	rcu_virt_note_context_switch(smp_processor_id());
-}
-
-static inline void kvm_guest_exit(void)
-{
-	account_system_vtime(current);
-	current->flags &= ~PF_VCPU;
-}
-
-/*
- * search_memslots() and __gfn_to_memslot() are here because they are
- * used in non-modular code in arch/powerpc/kvm/book3s_hv_rm_mmu.c.
- * gfn_to_memslot() itself isn't here as an inline because that would
- * bloat other code too much.
- */
-static inline struct kvm_memory_slot *
-search_memslots(struct kvm_memslots *slots, gfn_t gfn)
-{
-	struct kvm_memory_slot *memslot;
-
-	kvm_for_each_memslot(memslot, slots)
-		if (gfn >= memslot->base_gfn &&
-		      gfn < memslot->base_gfn + memslot->npages)
-			return memslot;
-
-	return NULL;
-}
-
-static inline struct kvm_memory_slot *
-__gfn_to_memslot(struct kvm_memslots *slots, gfn_t gfn)
-{
-	return search_memslots(slots, gfn);
-}
-
-static inline int memslot_id(struct kvm *kvm, gfn_t gfn)
-{
-	return gfn_to_memslot(kvm, gfn)->id;
-}
-
-static inline gfn_t gfn_to_index(gfn_t gfn, gfn_t base_gfn, int level)
-{
-	/* KVM_HPAGE_GFN_SHIFT(PT_PAGE_TABLE_LEVEL) must be 0. */
-	return (gfn >> KVM_HPAGE_GFN_SHIFT(level)) -
-		(base_gfn >> KVM_HPAGE_GFN_SHIFT(level));
-}
-
-static inline unsigned long gfn_to_hva_memslot(struct kvm_memory_slot *slot,
-					       gfn_t gfn)
-{
-	return slot->userspace_addr + (gfn - slot->base_gfn) * PAGE_SIZE;
-}
-
-static inline gpa_t gfn_to_gpa(gfn_t gfn)
-{
-	return (gpa_t)gfn << PAGE_SHIFT;
-}
-
-static inline gfn_t gpa_to_gfn(gpa_t gpa)
-{
-	return (gfn_t)(gpa >> PAGE_SHIFT);
-}
-
-static inline hpa_t pfn_to_hpa(pfn_t pfn)
-{
-	return (hpa_t)pfn << PAGE_SHIFT;
-}
-
-static inline void kvm_migrate_timers(struct kvm_vcpu *vcpu)
-{
-	set_bit(KVM_REQ_MIGRATE_TIMER, &vcpu->requests);
-}
-
-enum kvm_stat_kind {
-	KVM_STAT_VM,
-	KVM_STAT_VCPU,
-};
-
-struct kvm_stats_debugfs_item {
-	const char *name;
-	int offset;
-	enum kvm_stat_kind kind;
-	struct dentry *dentry;
-};
-extern struct kvm_stats_debugfs_item debugfs_entries[];
-extern struct dentry *kvm_debugfs_dir;
-
-#ifdef KVM_ARCH_WANT_MMU_NOTIFIER
-static inline int mmu_notifier_retry(struct kvm_vcpu *vcpu, unsigned long mmu_seq)
-{
-	if (unlikely(vcpu->kvm->mmu_notifier_count))
-		return 1;
-	/*
-	 * Ensure the read of mmu_notifier_count happens before the read
-	 * of mmu_notifier_seq.  This interacts with the smp_wmb() in
-	 * mmu_notifier_invalidate_range_end to make sure that the caller
-	 * either sees the old (non-zero) value of mmu_notifier_count or
-	 * the new (incremented) value of mmu_notifier_seq.
-	 * PowerPC Book3s HV KVM calls this under a per-page lock
-	 * rather than under kvm->mmu_lock, for scalability, so
-	 * can't rely on kvm->mmu_lock to keep things ordered.
-	 */
-	smp_rmb();
-	if (vcpu->kvm->mmu_notifier_seq != mmu_seq)
-		return 1;
-	return 0;
-}
-#endif
-
-#ifdef CONFIG_HAVE_KVM_IRQCHIP
-
-#define KVM_MAX_IRQ_ROUTES 1024
-
-int kvm_setup_default_irq_routing(struct kvm *kvm);
-int kvm_set_irq_routing(struct kvm *kvm,
-			const struct kvm_irq_routing_entry *entries,
-			unsigned nr,
-			unsigned flags);
-void kvm_free_irq_routing(struct kvm *kvm);
-
-#else
-
-static inline void kvm_free_irq_routing(struct kvm *kvm) {}
-
-#endif
-
-#ifdef CONFIG_HAVE_KVM_EVENTFD
-
-void kvm_eventfd_init(struct kvm *kvm);
-int kvm_irqfd(struct kvm *kvm, int fd, int gsi, int flags);
-void kvm_irqfd_release(struct kvm *kvm);
-void kvm_irq_routing_update(struct kvm *, struct kvm_irq_routing_table *);
-int kvm_ioeventfd(struct kvm *kvm, struct kvm_ioeventfd *args);
-
-#else
-
-static inline void kvm_eventfd_init(struct kvm *kvm) {}
-
-static inline int kvm_irqfd(struct kvm *kvm, int fd, int gsi, int flags)
-{
-	return -EINVAL;
-}
-
-static inline void kvm_irqfd_release(struct kvm *kvm) {}
-
-#ifdef CONFIG_HAVE_KVM_IRQCHIP
-static inline void kvm_irq_routing_update(struct kvm *kvm,
-					  struct kvm_irq_routing_table *irq_rt)
-{
-	rcu_assign_pointer(kvm->irq_routing, irq_rt);
-}
-#endif
-
-static inline int kvm_ioeventfd(struct kvm *kvm, struct kvm_ioeventfd *args)
-{
-	return -ENOSYS;
-}
-
-#endif /* CONFIG_HAVE_KVM_EVENTFD */
-
-#ifdef CONFIG_KVM_APIC_ARCHITECTURE
-static inline bool kvm_vcpu_is_bsp(struct kvm_vcpu *vcpu)
-{
-	return vcpu->kvm->bsp_vcpu_id == vcpu->vcpu_id;
-}
-
-bool kvm_vcpu_compatible(struct kvm_vcpu *vcpu);
-
-#else
-
-static inline bool kvm_vcpu_compatible(struct kvm_vcpu *vcpu) { return true; }
-
-#endif
-
-#ifdef __KVM_HAVE_DEVICE_ASSIGNMENT
-
-long kvm_vm_ioctl_assigned_device(struct kvm *kvm, unsigned ioctl,
-				  unsigned long arg);
-
-#else
-
-static inline long kvm_vm_ioctl_assigned_device(struct kvm *kvm, unsigned ioctl,
-						unsigned long arg)
-{
-	return -ENOTTY;
-}
-
-#endif
-
-static inline void kvm_make_request(int req, struct kvm_vcpu *vcpu)
-{
-	set_bit(req, &vcpu->requests);
-}
-
-static inline bool kvm_check_request(int req, struct kvm_vcpu *vcpu)
-{
-	if (test_bit(req, &vcpu->requests)) {
-		clear_bit(req, &vcpu->requests);
-		return true;
-	} else {
-		return false;
-	}
-}
-
-#endif
-
diff --git a/ANDROID_3.4.5/include/linux/kvm_para.h b/ANDROID_3.4.5/include/linux/kvm_para.h
deleted file mode 100644
index ff476dda..00000000
--- a/ANDROID_3.4.5/include/linux/kvm_para.h
+++ /dev/null
@@ -1,37 +0,0 @@
-#ifndef __LINUX_KVM_PARA_H
-#define __LINUX_KVM_PARA_H
-
-/*
- * This header file provides a method for making a hypercall to the host
- * Architectures should define:
- * - kvm_hypercall0, kvm_hypercall1...
- * - kvm_arch_para_features
- * - kvm_para_available
- */
-
-/* Return values for hypercalls */
-#define KVM_ENOSYS		1000
-#define KVM_EFAULT		EFAULT
-#define KVM_E2BIG		E2BIG
-#define KVM_EPERM		EPERM
-
-#define KVM_HC_VAPIC_POLL_IRQ		1
-#define KVM_HC_MMU_OP			2
-#define KVM_HC_FEATURES			3
-#define KVM_HC_PPC_MAP_MAGIC_PAGE	4
-
-/*
- * hypercalls use architecture specific
- */
-#include <asm/kvm_para.h>
-
-#ifdef __KERNEL__
-
-static inline int kvm_para_has_feature(unsigned int feature)
-{
-	if (kvm_arch_para_features() & (1UL << feature))
-		return 1;
-	return 0;
-}
-#endif /* __KERNEL__ */
-#endif /* __LINUX_KVM_PARA_H */
diff --git a/ANDROID_3.4.5/include/linux/kvm_types.h b/ANDROID_3.4.5/include/linux/kvm_types.h
deleted file mode 100644
index fa7cc724..00000000
--- a/ANDROID_3.4.5/include/linux/kvm_types.h
+++ /dev/null
@@ -1,77 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
- *
- */
-
-#ifndef __KVM_TYPES_H__
-#define __KVM_TYPES_H__
-
-#include <asm/types.h>
-
-/*
- * Address types:
- *
- *  gva - guest virtual address
- *  gpa - guest physical address
- *  gfn - guest frame number
- *  hva - host virtual address
- *  hpa - host physical address
- *  hfn - host frame number
- */
-
-typedef unsigned long  gva_t;
-typedef u64            gpa_t;
-typedef u64            gfn_t;
-
-typedef unsigned long  hva_t;
-typedef u64            hpa_t;
-typedef u64            hfn_t;
-
-typedef hfn_t pfn_t;
-
-union kvm_ioapic_redirect_entry {
-	u64 bits;
-	struct {
-		u8 vector;
-		u8 delivery_mode:3;
-		u8 dest_mode:1;
-		u8 delivery_status:1;
-		u8 polarity:1;
-		u8 remote_irr:1;
-		u8 trig_mode:1;
-		u8 mask:1;
-		u8 reserve:7;
-		u8 reserved[4];
-		u8 dest_id;
-	} fields;
-};
-
-struct kvm_lapic_irq {
-	u32 vector;
-	u32 delivery_mode;
-	u32 dest_mode;
-	u32 level;
-	u32 trig_mode;
-	u32 shorthand;
-	u32 dest_id;
-};
-
-struct gfn_to_hva_cache {
-	u64 generation;
-	gpa_t gpa;
-	unsigned long hva;
-	struct kvm_memory_slot *memslot;
-};
-
-#endif /* __KVM_TYPES_H__ */
diff --git a/ANDROID_3.4.5/include/linux/l2tp.h b/ANDROID_3.4.5/include/linux/l2tp.h
deleted file mode 100644
index e77d7f9b..00000000
--- a/ANDROID_3.4.5/include/linux/l2tp.h
+++ /dev/null
@@ -1,164 +0,0 @@
-/*
- * L2TP-over-IP socket for L2TPv3.
- *
- * Author: James Chapman <jchapman@katalix.com>
- */
-
-#ifndef _LINUX_L2TP_H_
-#define _LINUX_L2TP_H_
-
-#include <linux/types.h>
-#include <linux/socket.h>
-#ifdef __KERNEL__
-#include <linux/in.h>
-#else
-#include <netinet/in.h>
-#endif
-
-#define IPPROTO_L2TP		115
-
-/**
- * struct sockaddr_l2tpip - the sockaddr structure for L2TP-over-IP sockets
- * @l2tp_family:  address family number AF_L2TPIP.
- * @l2tp_addr:    protocol specific address information
- * @l2tp_conn_id: connection id of tunnel
- */
-#define __SOCK_SIZE__	16		/* sizeof(struct sockaddr)	*/
-struct sockaddr_l2tpip {
-	/* The first fields must match struct sockaddr_in */
-	__kernel_sa_family_t l2tp_family; /* AF_INET */
-	__be16		l2tp_unused;	/* INET port number (unused) */
-	struct in_addr	l2tp_addr;	/* Internet address */
-
-	__u32		l2tp_conn_id;	/* Connection ID of tunnel */
-
-	/* Pad to size of `struct sockaddr'. */
-	unsigned char	__pad[sizeof(struct sockaddr) -
-			      sizeof(__kernel_sa_family_t) -
-			      sizeof(__be16) - sizeof(struct in_addr) -
-			      sizeof(__u32)];
-};
-
-/*****************************************************************************
- *  NETLINK_GENERIC netlink family.
- *****************************************************************************/
-
-/*
- * Commands.
- * Valid TLVs of each command are:-
- * TUNNEL_CREATE	- CONN_ID, pw_type, netns, ifname, ipinfo, udpinfo, udpcsum, vlanid
- * TUNNEL_DELETE	- CONN_ID
- * TUNNEL_MODIFY	- CONN_ID, udpcsum
- * TUNNEL_GETSTATS	- CONN_ID, (stats)
- * TUNNEL_GET		- CONN_ID, (...)
- * SESSION_CREATE	- SESSION_ID, PW_TYPE, offset, data_seq, cookie, peer_cookie, offset, l2spec
- * SESSION_DELETE	- SESSION_ID
- * SESSION_MODIFY	- SESSION_ID, data_seq
- * SESSION_GET		- SESSION_ID, (...)
- * SESSION_GETSTATS	- SESSION_ID, (stats)
- *
- */
-enum {
-	L2TP_CMD_NOOP,
-	L2TP_CMD_TUNNEL_CREATE,
-	L2TP_CMD_TUNNEL_DELETE,
-	L2TP_CMD_TUNNEL_MODIFY,
-	L2TP_CMD_TUNNEL_GET,
-	L2TP_CMD_SESSION_CREATE,
-	L2TP_CMD_SESSION_DELETE,
-	L2TP_CMD_SESSION_MODIFY,
-	L2TP_CMD_SESSION_GET,
-	__L2TP_CMD_MAX,
-};
-
-#define L2TP_CMD_MAX			(__L2TP_CMD_MAX - 1)
-
-/*
- * ATTR types defined for L2TP
- */
-enum {
-	L2TP_ATTR_NONE,			/* no data */
-	L2TP_ATTR_PW_TYPE,		/* u16, enum l2tp_pwtype */
-	L2TP_ATTR_ENCAP_TYPE,		/* u16, enum l2tp_encap_type */
-	L2TP_ATTR_OFFSET,		/* u16 */
-	L2TP_ATTR_DATA_SEQ,		/* u16 */
-	L2TP_ATTR_L2SPEC_TYPE,		/* u8, enum l2tp_l2spec_type */
-	L2TP_ATTR_L2SPEC_LEN,		/* u8, enum l2tp_l2spec_type */
-	L2TP_ATTR_PROTO_VERSION,	/* u8 */
-	L2TP_ATTR_IFNAME,		/* string */
-	L2TP_ATTR_CONN_ID,		/* u32 */
-	L2TP_ATTR_PEER_CONN_ID,		/* u32 */
-	L2TP_ATTR_SESSION_ID,		/* u32 */
-	L2TP_ATTR_PEER_SESSION_ID,	/* u32 */
-	L2TP_ATTR_UDP_CSUM,		/* u8 */
-	L2TP_ATTR_VLAN_ID,		/* u16 */
-	L2TP_ATTR_COOKIE,		/* 0, 4 or 8 bytes */
-	L2TP_ATTR_PEER_COOKIE,		/* 0, 4 or 8 bytes */
-	L2TP_ATTR_DEBUG,		/* u32 */
-	L2TP_ATTR_RECV_SEQ,		/* u8 */
-	L2TP_ATTR_SEND_SEQ,		/* u8 */
-	L2TP_ATTR_LNS_MODE,		/* u8 */
-	L2TP_ATTR_USING_IPSEC,		/* u8 */
-	L2TP_ATTR_RECV_TIMEOUT,		/* msec */
-	L2TP_ATTR_FD,			/* int */
-	L2TP_ATTR_IP_SADDR,		/* u32 */
-	L2TP_ATTR_IP_DADDR,		/* u32 */
-	L2TP_ATTR_UDP_SPORT,		/* u16 */
-	L2TP_ATTR_UDP_DPORT,		/* u16 */
-	L2TP_ATTR_MTU,			/* u16 */
-	L2TP_ATTR_MRU,			/* u16 */
-	L2TP_ATTR_STATS,		/* nested */
-	__L2TP_ATTR_MAX,
-};
-
-#define L2TP_ATTR_MAX			(__L2TP_ATTR_MAX - 1)
-
-/* Nested in L2TP_ATTR_STATS */
-enum {
-	L2TP_ATTR_STATS_NONE,		/* no data */
-	L2TP_ATTR_TX_PACKETS,		/* u64 */
-	L2TP_ATTR_TX_BYTES,		/* u64 */
-	L2TP_ATTR_TX_ERRORS,		/* u64 */
-	L2TP_ATTR_RX_PACKETS,		/* u64 */
-	L2TP_ATTR_RX_BYTES,		/* u64 */
-	L2TP_ATTR_RX_SEQ_DISCARDS,	/* u64 */
-	L2TP_ATTR_RX_OOS_PACKETS,	/* u64 */
-	L2TP_ATTR_RX_ERRORS,		/* u64 */
-	__L2TP_ATTR_STATS_MAX,
-};
-
-#define L2TP_ATTR_STATS_MAX		(__L2TP_ATTR_STATS_MAX - 1)
-
-enum l2tp_pwtype {
-	L2TP_PWTYPE_NONE = 0x0000,
-	L2TP_PWTYPE_ETH_VLAN = 0x0004,
-	L2TP_PWTYPE_ETH = 0x0005,
-	L2TP_PWTYPE_PPP = 0x0007,
-	L2TP_PWTYPE_PPP_AC = 0x0008,
-	L2TP_PWTYPE_IP = 0x000b,
-	__L2TP_PWTYPE_MAX
-};
-
-enum l2tp_l2spec_type {
-	L2TP_L2SPECTYPE_NONE,
-	L2TP_L2SPECTYPE_DEFAULT,
-};
-
-enum l2tp_encap_type {
-	L2TP_ENCAPTYPE_UDP,
-	L2TP_ENCAPTYPE_IP,
-};
-
-enum l2tp_seqmode {
-	L2TP_SEQ_NONE = 0,
-	L2TP_SEQ_IP = 1,
-	L2TP_SEQ_ALL = 2,
-};
-
-/*
- * NETLINK_GENERIC related info
- */
-#define L2TP_GENL_NAME		"l2tp"
-#define L2TP_GENL_VERSION	0x1
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/lapb.h b/ANDROID_3.4.5/include/linux/lapb.h
deleted file mode 100644
index 873c1eb6..00000000
--- a/ANDROID_3.4.5/include/linux/lapb.h
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- * These are the public elements of the Linux LAPB module.
- */
-
-#ifndef	LAPB_KERNEL_H
-#define	LAPB_KERNEL_H
-
-#define	LAPB_OK			0
-#define	LAPB_BADTOKEN		1
-#define	LAPB_INVALUE		2
-#define	LAPB_CONNECTED		3
-#define	LAPB_NOTCONNECTED	4
-#define	LAPB_REFUSED		5
-#define	LAPB_TIMEDOUT		6
-#define	LAPB_NOMEM		7
-
-#define	LAPB_STANDARD		0x00
-#define	LAPB_EXTENDED		0x01
-
-#define	LAPB_SLP		0x00
-#define	LAPB_MLP		0x02
-
-#define	LAPB_DTE		0x00
-#define	LAPB_DCE		0x04
-
-struct lapb_register_struct {
-	void (*connect_confirmation)(struct net_device *dev, int reason);
-	void (*connect_indication)(struct net_device *dev, int reason);
-	void (*disconnect_confirmation)(struct net_device *dev, int reason);
-	void (*disconnect_indication)(struct net_device *dev, int reason);
-	int  (*data_indication)(struct net_device *dev, struct sk_buff *skb);
-	void (*data_transmit)(struct net_device *dev, struct sk_buff *skb);
-};
-
-struct lapb_parms_struct {
-	unsigned int t1;
-	unsigned int t1timer;
-	unsigned int t2;
-	unsigned int t2timer;
-	unsigned int n2;
-	unsigned int n2count;
-	unsigned int window;
-	unsigned int state;
-	unsigned int mode;
-};
-
-extern int lapb_register(struct net_device *dev,
-			 const struct lapb_register_struct *callbacks);
-extern int lapb_unregister(struct net_device *dev);
-extern int lapb_getparms(struct net_device *dev, struct lapb_parms_struct *parms);
-extern int lapb_setparms(struct net_device *dev, struct lapb_parms_struct *parms);
-extern int lapb_connect_request(struct net_device *dev);
-extern int lapb_disconnect_request(struct net_device *dev);
-extern int lapb_data_request(struct net_device *dev, struct sk_buff *skb);
-extern int lapb_data_received(struct net_device *dev, struct sk_buff *skb);
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/latencytop.h b/ANDROID_3.4.5/include/linux/latencytop.h
deleted file mode 100644
index e23121f9..00000000
--- a/ANDROID_3.4.5/include/linux/latencytop.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- * latencytop.h: Infrastructure for displaying latency
- *
- * (C) Copyright 2008 Intel Corporation
- * Author: Arjan van de Ven <arjan@linux.intel.com>
- *
- */
-
-#ifndef _INCLUDE_GUARD_LATENCYTOP_H_
-#define _INCLUDE_GUARD_LATENCYTOP_H_
-
-#include <linux/compiler.h>
-struct task_struct;
-
-#ifdef CONFIG_LATENCYTOP
-
-#define LT_SAVECOUNT		32
-#define LT_BACKTRACEDEPTH	12
-
-struct latency_record {
-	unsigned long	backtrace[LT_BACKTRACEDEPTH];
-	unsigned int	count;
-	unsigned long	time;
-	unsigned long	max;
-};
-
-
-
-extern int latencytop_enabled;
-void __account_scheduler_latency(struct task_struct *task, int usecs, int inter);
-static inline void
-account_scheduler_latency(struct task_struct *task, int usecs, int inter)
-{
-	if (unlikely(latencytop_enabled))
-		__account_scheduler_latency(task, usecs, inter);
-}
-
-void clear_all_latency_tracing(struct task_struct *p);
-
-#else
-
-static inline void
-account_scheduler_latency(struct task_struct *task, int usecs, int inter)
-{
-}
-
-static inline void clear_all_latency_tracing(struct task_struct *p)
-{
-}
-
-#endif
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/lcd.h b/ANDROID_3.4.5/include/linux/lcd.h
deleted file mode 100644
index 8877123f..00000000
--- a/ANDROID_3.4.5/include/linux/lcd.h
+++ /dev/null
@@ -1,115 +0,0 @@
-/*
- * LCD Lowlevel Control Abstraction
- *
- * Copyright (C) 2003,2004 Hewlett-Packard Company
- *
- */
-
-#ifndef _LINUX_LCD_H
-#define _LINUX_LCD_H
-
-#include <linux/device.h>
-#include <linux/mutex.h>
-#include <linux/notifier.h>
-#include <linux/fb.h>
-
-/* Notes on locking:
- *
- * lcd_device->ops_lock is an internal backlight lock protecting the ops
- * field and no code outside the core should need to touch it.
- *
- * Access to set_power() is serialised by the update_lock mutex since
- * most drivers seem to need this and historically get it wrong.
- *
- * Most drivers don't need locking on their get_power() method.
- * If yours does, you need to implement it in the driver. You can use the
- * update_lock mutex if appropriate.
- *
- * Any other use of the locks below is probably wrong.
- */
-
-struct lcd_device;
-struct fb_info;
-
-struct lcd_properties {
-	/* The maximum value for contrast (read-only) */
-	int max_contrast;
-};
-
-struct lcd_ops {
-	/* Get the LCD panel power status (0: full on, 1..3: controller
-	   power on, flat panel power off, 4: full off), see FB_BLANK_XXX */
-	int (*get_power)(struct lcd_device *);
-	/* Enable or disable power to the LCD (0: on; 4: off, see FB_BLANK_XXX) */
-	int (*set_power)(struct lcd_device *, int power);
-	/* Get the current contrast setting (0-max_contrast) */
-	int (*get_contrast)(struct lcd_device *);
-	/* Set LCD panel contrast */
-        int (*set_contrast)(struct lcd_device *, int contrast);
-	/* Set LCD panel mode (resolutions ...) */
-	int (*set_mode)(struct lcd_device *, struct fb_videomode *);
-	/* Check if given framebuffer device is the one LCD is bound to;
-	   return 0 if not, !=0 if it is. If NULL, lcd always matches the fb. */
-	int (*check_fb)(struct lcd_device *, struct fb_info *);
-};
-
-struct lcd_device {
-	struct lcd_properties props;
-	/* This protects the 'ops' field. If 'ops' is NULL, the driver that
-	   registered this device has been unloaded, and if class_get_devdata()
-	   points to something in the body of that driver, it is also invalid. */
-	struct mutex ops_lock;
-	/* If this is NULL, the backing module is unloaded */
-	struct lcd_ops *ops;
-	/* Serialise access to set_power method */
-	struct mutex update_lock;
-	/* The framebuffer notifier block */
-	struct notifier_block fb_notif;
-
-	struct device dev;
-};
-
-struct lcd_platform_data {
-	/* reset lcd panel device. */
-	int (*reset)(struct lcd_device *ld);
-	/* on or off to lcd panel. if 'enable' is 0 then
-	   lcd power off and 1, lcd power on. */
-	int (*power_on)(struct lcd_device *ld, int enable);
-
-	/* it indicates whether lcd panel was enabled
-	   from bootloader or not. */
-	int lcd_enabled;
-	/* it means delay for stable time when it becomes low to high
-	   or high to low that is dependent on whether reset gpio is
-	   low active or high active. */
-	unsigned int reset_delay;
-	/* stable time needing to become lcd power on. */
-	unsigned int power_on_delay;
-	/* stable time needing to become lcd power off. */
-	unsigned int power_off_delay;
-
-	/* it could be used for any purpose. */
-	void *pdata;
-};
-
-static inline void lcd_set_power(struct lcd_device *ld, int power)
-{
-	mutex_lock(&ld->update_lock);
-	if (ld->ops && ld->ops->set_power)
-		ld->ops->set_power(ld, power);
-	mutex_unlock(&ld->update_lock);
-}
-
-extern struct lcd_device *lcd_device_register(const char *name,
-	struct device *parent, void *devdata, struct lcd_ops *ops);
-extern void lcd_device_unregister(struct lcd_device *ld);
-
-#define to_lcd_device(obj) container_of(obj, struct lcd_device, dev)
-
-static inline void * lcd_get_data(struct lcd_device *ld_dev)
-{
-	return dev_get_drvdata(&ld_dev->dev);
-}
-
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/lcm.h b/ANDROID_3.4.5/include/linux/lcm.h
deleted file mode 100644
index 7bf01d77..00000000
--- a/ANDROID_3.4.5/include/linux/lcm.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef _LCM_H
-#define _LCM_H
-
-#include <linux/compiler.h>
-
-unsigned long lcm(unsigned long a, unsigned long b) __attribute_const__;
-
-#endif /* _LCM_H */
diff --git a/ANDROID_3.4.5/include/linux/led-lm3530.h b/ANDROID_3.4.5/include/linux/led-lm3530.h
deleted file mode 100644
index eeae6e74..00000000
--- a/ANDROID_3.4.5/include/linux/led-lm3530.h
+++ /dev/null
@@ -1,121 +0,0 @@
-/*
- * Copyright (C) 2011 ST-Ericsson SA.
- * Copyright (C) 2009 Motorola, Inc.
- *
- * License Terms: GNU General Public License v2
- *
- * Simple driver for National Semiconductor LM35330 Backlight driver chip
- *
- * Author: Shreshtha Kumar SAHU <shreshthakumar.sahu@stericsson.com>
- * based on leds-lm3530.c by Dan Murphy <D.Murphy@motorola.com>
- */
-
-#ifndef _LINUX_LED_LM3530_H__
-#define _LINUX_LED_LM3530_H__
-
-#define LM3530_FS_CURR_5mA		(0) /* Full Scale Current */
-#define LM3530_FS_CURR_8mA		(1)
-#define LM3530_FS_CURR_12mA		(2)
-#define LM3530_FS_CURR_15mA		(3)
-#define LM3530_FS_CURR_19mA		(4)
-#define LM3530_FS_CURR_22mA		(5)
-#define LM3530_FS_CURR_26mA		(6)
-#define LM3530_FS_CURR_29mA		(7)
-
-#define LM3530_ALS_AVRG_TIME_32ms	(0) /* ALS Averaging Time */
-#define LM3530_ALS_AVRG_TIME_64ms	(1)
-#define LM3530_ALS_AVRG_TIME_128ms	(2)
-#define LM3530_ALS_AVRG_TIME_256ms	(3)
-#define LM3530_ALS_AVRG_TIME_512ms	(4)
-#define LM3530_ALS_AVRG_TIME_1024ms	(5)
-#define LM3530_ALS_AVRG_TIME_2048ms	(6)
-#define LM3530_ALS_AVRG_TIME_4096ms	(7)
-
-#define LM3530_RAMP_TIME_1ms		(0) /* Brigtness Ramp Time */
-#define LM3530_RAMP_TIME_130ms		(1) /* Max to 0 and vice versa */
-#define LM3530_RAMP_TIME_260ms		(2)
-#define LM3530_RAMP_TIME_520ms		(3)
-#define LM3530_RAMP_TIME_1s		(4)
-#define LM3530_RAMP_TIME_2s		(5)
-#define LM3530_RAMP_TIME_4s		(6)
-#define LM3530_RAMP_TIME_8s		(7)
-
-/* ALS Resistor Select */
-#define LM3530_ALS_IMPD_Z		(0x00) /* ALS Impedance */
-#define LM3530_ALS_IMPD_13_53kOhm	(0x01)
-#define LM3530_ALS_IMPD_9_01kOhm	(0x02)
-#define LM3530_ALS_IMPD_5_41kOhm	(0x03)
-#define LM3530_ALS_IMPD_2_27kOhm	(0x04)
-#define LM3530_ALS_IMPD_1_94kOhm	(0x05)
-#define LM3530_ALS_IMPD_1_81kOhm	(0x06)
-#define LM3530_ALS_IMPD_1_6kOhm		(0x07)
-#define LM3530_ALS_IMPD_1_138kOhm	(0x08)
-#define LM3530_ALS_IMPD_1_05kOhm	(0x09)
-#define LM3530_ALS_IMPD_1_011kOhm	(0x0A)
-#define LM3530_ALS_IMPD_941Ohm		(0x0B)
-#define LM3530_ALS_IMPD_759Ohm		(0x0C)
-#define LM3530_ALS_IMPD_719Ohm		(0x0D)
-#define LM3530_ALS_IMPD_700Ohm		(0x0E)
-#define LM3530_ALS_IMPD_667Ohm		(0x0F)
-
-enum lm3530_mode {
-	LM3530_BL_MODE_MANUAL = 0,	/* "man" */
-	LM3530_BL_MODE_ALS,		/* "als" */
-	LM3530_BL_MODE_PWM,		/* "pwm" */
-};
-
-/* ALS input select */
-enum lm3530_als_mode {
-	LM3530_INPUT_AVRG = 0,	/* ALS1 and ALS2 input average */
-	LM3530_INPUT_ALS1,	/* ALS1 Input */
-	LM3530_INPUT_ALS2,	/* ALS2 Input */
-	LM3530_INPUT_CEIL,	/* Max of ALS1 and ALS2 */
-};
-
-/* PWM Platform Specific Data */
-struct lm3530_pwm_data {
-	void (*pwm_set_intensity) (int brightness, int max_brightness);
-	int (*pwm_get_intensity) (int max_brightness);
-};
-
-/**
- * struct lm3530_platform_data
- * @mode: mode of operation i.e. Manual, ALS or PWM
- * @als_input_mode: select source of ALS input - ALS1/2 or average
- * @max_current: full scale LED current
- * @pwm_pol_hi: PWM input polarity - active high/active low
- * @als_avrg_time: ALS input averaging time
- * @brt_ramp_law: brightness mapping mode - exponential/linear
- * @brt_ramp_fall: rate of fall of led current
- * @brt_ramp_rise: rate of rise of led current
- * @als1_resistor_sel: internal resistance from ALS1 input to ground
- * @als2_resistor_sel: internal resistance from ALS2 input to ground
- * @als_vmin: als input voltage calibrated for max brightness in mV
- * @als_vmax: als input voltage calibrated for min brightness in mV
- * @brt_val: brightness value (0-255)
- * @pwm_data: PWM control functions (only valid when the mode is PWM)
- */
-struct lm3530_platform_data {
-	enum lm3530_mode mode;
-	enum lm3530_als_mode als_input_mode;
-
-	u8 max_current;
-	bool pwm_pol_hi;
-	u8 als_avrg_time;
-
-	bool brt_ramp_law;
-	u8 brt_ramp_fall;
-	u8 brt_ramp_rise;
-
-	u8 als1_resistor_sel;
-	u8 als2_resistor_sel;
-
-	u32 als_vmin;
-	u32 als_vmax;
-
-	u8 brt_val;
-
-	struct lm3530_pwm_data pwm_data;
-};
-
-#endif	/* _LINUX_LED_LM3530_H__ */
diff --git a/ANDROID_3.4.5/include/linux/leds-bd2802.h b/ANDROID_3.4.5/include/linux/leds-bd2802.h
deleted file mode 100644
index 42f854a1..00000000
--- a/ANDROID_3.4.5/include/linux/leds-bd2802.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * leds-bd2802.h - RGB LED Driver
- *
- * Copyright (C) 2009 Samsung Electronics
- * Kim Kyuwon <q1.kim@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Datasheet: http://www.rohm.com/products/databook/driver/pdf/bd2802gu-e.pdf
- *
- */
-#ifndef _LEDS_BD2802_H_
-#define _LEDS_BD2802_H_
-
-struct bd2802_led_platform_data{
-	int	reset_gpio;
-	u8	rgb_time;
-};
-
-#define RGB_TIME(slopedown, slopeup, waveform) \
-	((slopedown) << 6 | (slopeup) << 4 | (waveform))
-
-#endif /* _LEDS_BD2802_H_ */
-
diff --git a/ANDROID_3.4.5/include/linux/leds-lp3944.h b/ANDROID_3.4.5/include/linux/leds-lp3944.h
deleted file mode 100644
index 2618aa90..00000000
--- a/ANDROID_3.4.5/include/linux/leds-lp3944.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * leds-lp3944.h - platform data structure for lp3944 led controller
- *
- * Copyright (C) 2009 Antonio Ospite <ospite@studenti.unina.it>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#ifndef __LINUX_LEDS_LP3944_H
-#define __LINUX_LEDS_LP3944_H
-
-#define LP3944_LED0 0
-#define LP3944_LED1 1
-#define LP3944_LED2 2
-#define LP3944_LED3 3
-#define LP3944_LED4 4
-#define LP3944_LED5 5
-#define LP3944_LED6 6
-#define LP3944_LED7 7
-#define LP3944_LEDS_MAX 8
-
-#define LP3944_LED_STATUS_MASK	0x03
-enum lp3944_status {
-	LP3944_LED_STATUS_OFF  = 0x0,
-	LP3944_LED_STATUS_ON   = 0x1,
-	LP3944_LED_STATUS_DIM0 = 0x2,
-	LP3944_LED_STATUS_DIM1 = 0x3
-};
-
-enum lp3944_type {
-	LP3944_LED_TYPE_NONE,
-	LP3944_LED_TYPE_LED,
-	LP3944_LED_TYPE_LED_INVERTED,
-};
-
-struct lp3944_led {
-	char *name;
-	enum lp3944_type type;
-	enum lp3944_status status;
-};
-
-struct lp3944_platform_data {
-	struct lp3944_led leds[LP3944_LEDS_MAX];
-	u8 leds_size;
-};
-
-#endif /* __LINUX_LEDS_LP3944_H */
diff --git a/ANDROID_3.4.5/include/linux/leds-lp5521.h b/ANDROID_3.4.5/include/linux/leds-lp5521.h
deleted file mode 100644
index 3f071ec0..00000000
--- a/ANDROID_3.4.5/include/linux/leds-lp5521.h
+++ /dev/null
@@ -1,73 +0,0 @@
-/*
- * LP5521 LED chip driver.
- *
- * Copyright (C) 2010 Nokia Corporation
- *
- * Contact: Samu Onkalo <samu.p.onkalo@nokia.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- */
-
-#ifndef __LINUX_LP5521_H
-#define __LINUX_LP5521_H
-
-/* See Documentation/leds/leds-lp5521.txt */
-
-struct lp5521_led_config {
-	char		*name;
-	u8		chan_nr;
-	u8		led_current; /* mA x10, 0 if led is not connected */
-	u8		max_current;
-};
-
-struct lp5521_led_pattern {
-	u8 *r;
-	u8 *g;
-	u8 *b;
-	u8 size_r;
-	u8 size_g;
-	u8 size_b;
-};
-
-#define LP5521_CLOCK_AUTO	0
-#define LP5521_CLOCK_INT	1
-#define LP5521_CLOCK_EXT	2
-
-/* Bits in CONFIG register */
-#define LP5521_PWM_HF			0x40	/* PWM: 0 = 256Hz, 1 = 558Hz */
-#define LP5521_PWRSAVE_EN		0x20	/* 1 = Power save mode */
-#define LP5521_CP_MODE_OFF		0	/* Charge pump (CP) off */
-#define LP5521_CP_MODE_BYPASS		8	/* CP forced to bypass mode */
-#define LP5521_CP_MODE_1X5		0x10	/* CP forced to 1.5x mode */
-#define LP5521_CP_MODE_AUTO		0x18	/* Automatic mode selection */
-#define LP5521_R_TO_BATT		4	/* R out: 0 = CP, 1 = Vbat */
-#define LP5521_CLK_SRC_EXT		0	/* Ext-clk source (CLK_32K) */
-#define LP5521_CLK_INT			1	/* Internal clock */
-#define LP5521_CLK_AUTO			2	/* Automatic clock selection */
-
-struct lp5521_platform_data {
-	struct lp5521_led_config *led_config;
-	u8	num_channels;
-	u8	clock_mode;
-	int	(*setup_resources)(void);
-	void	(*release_resources)(void);
-	void	(*enable)(bool state);
-	const char *label;
-	u8	update_config;
-	struct lp5521_led_pattern *patterns;
-	int num_patterns;
-};
-
-#endif /* __LINUX_LP5521_H */
diff --git a/ANDROID_3.4.5/include/linux/leds-lp5523.h b/ANDROID_3.4.5/include/linux/leds-lp5523.h
deleted file mode 100644
index 2694289b..00000000
--- a/ANDROID_3.4.5/include/linux/leds-lp5523.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * LP5523 LED Driver
- *
- * Copyright (C) 2010 Nokia Corporation
- *
- * Contact: Samu Onkalo <samu.p.onkalo@nokia.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- */
-
-#ifndef __LINUX_LP5523_H
-#define __LINUX_LP5523_H
-
-/* See Documentation/leds/leds-lp5523.txt */
-
-struct lp5523_led_config {
-	u8		chan_nr;
-	u8		led_current; /* mA x10, 0 if led is not connected */
-	u8		max_current;
-};
-
-#define LP5523_CLOCK_AUTO	0
-#define LP5523_CLOCK_INT	1
-#define LP5523_CLOCK_EXT	2
-
-struct lp5523_platform_data {
-	struct lp5523_led_config *led_config;
-	u8	num_channels;
-	u8	clock_mode;
-	int	(*setup_resources)(void);
-	void	(*release_resources)(void);
-	void	(*enable)(bool state);
-	const	char *label;
-};
-
-#endif /* __LINUX_LP5523_H */
diff --git a/ANDROID_3.4.5/include/linux/leds-pca9532.h b/ANDROID_3.4.5/include/linux/leds-pca9532.h
deleted file mode 100644
index b8d6fffe..00000000
--- a/ANDROID_3.4.5/include/linux/leds-pca9532.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * pca9532.h - platform data structure for pca9532 led controller
- *
- * Copyright (C) 2008 Riku Voipio <riku.voipio@movial.fi>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * Datasheet: http://www.nxp.com/acrobat/datasheets/PCA9532_3.pdf
- *
- */
-
-#ifndef __LINUX_PCA9532_H
-#define __LINUX_PCA9532_H
-
-#include <linux/leds.h>
-#include <linux/workqueue.h>
-
-enum pca9532_state {
-	PCA9532_OFF  = 0x0,
-	PCA9532_ON   = 0x1,
-	PCA9532_PWM0 = 0x2,
-	PCA9532_PWM1 = 0x3
-};
-
-enum pca9532_type { PCA9532_TYPE_NONE, PCA9532_TYPE_LED,
-	PCA9532_TYPE_N2100_BEEP, PCA9532_TYPE_GPIO };
-
-struct pca9532_led {
-	u8 id;
-	struct i2c_client *client;
-	char *name;
-	struct led_classdev ldev;
-	struct work_struct work;
-	enum pca9532_type type;
-	enum pca9532_state state;
-};
-
-struct pca9532_platform_data {
-	struct pca9532_led leds[16];
-	u8 pwm[2];
-	u8 psc[2];
-	int gpio_base;
-};
-
-#endif /* __LINUX_PCA9532_H */
-
diff --git a/ANDROID_3.4.5/include/linux/leds-regulator.h b/ANDROID_3.4.5/include/linux/leds-regulator.h
deleted file mode 100644
index e2337a8c..00000000
--- a/ANDROID_3.4.5/include/linux/leds-regulator.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- * leds-regulator.h - platform data structure for regulator driven LEDs.
- *
- * Copyright (C) 2009 Antonio Ospite <ospite@studenti.unina.it>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#ifndef __LINUX_LEDS_REGULATOR_H
-#define __LINUX_LEDS_REGULATOR_H
-
-/*
- * Use "vled" as supply id when declaring the regulator consumer:
- *
- * static struct regulator_consumer_supply pcap_regulator_VVIB_consumers [] = {
- * 	{ .dev_name = "leds-regulator.0", .supply = "vled" },
- * };
- *
- * If you have several regulator driven LEDs, you can append a numerical id to
- * .dev_name as done above, and use the same id when declaring the platform
- * device:
- *
- * static struct led_regulator_platform_data a780_vibrator_data = {
- * 	.name   = "a780::vibrator",
- * };
- *
- * static struct platform_device a780_vibrator = {
- * 	.name = "leds-regulator",
- * 	.id   = 0,
- * 	.dev  = {
- * 		.platform_data = &a780_vibrator_data,
- * 	},
- * };
- */
-
-#include <linux/leds.h>
-
-struct led_regulator_platform_data {
-	char *name;                     /* LED name as expected by LED class */
-	enum led_brightness brightness; /* initial brightness value */
-};
-
-#endif /* __LINUX_LEDS_REGULATOR_H */
diff --git a/ANDROID_3.4.5/include/linux/leds-tca6507.h b/ANDROID_3.4.5/include/linux/leds-tca6507.h
deleted file mode 100644
index dcabf4fa..00000000
--- a/ANDROID_3.4.5/include/linux/leds-tca6507.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * TCA6507 LED chip driver.
- *
- * Copyright (C) 2011 Neil Brown <neil@brown.name>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- */
-
-#ifndef __LINUX_TCA6507_H
-#define __LINUX_TCA6507_H
-#include <linux/leds.h>
-
-struct tca6507_platform_data {
-	struct led_platform_data leds;
-#ifdef CONFIG_GPIOLIB
-	int gpio_base;
-	void (*setup)(unsigned gpio_base, unsigned ngpio);
-#endif
-};
-
-#define	TCA6507_MAKE_GPIO 1
-#endif /* __LINUX_TCA6507_H*/
diff --git a/ANDROID_3.4.5/include/linux/leds.h b/ANDROID_3.4.5/include/linux/leds.h
deleted file mode 100644
index 5884def1..00000000
--- a/ANDROID_3.4.5/include/linux/leds.h
+++ /dev/null
@@ -1,213 +0,0 @@
-/*
- * Driver model for leds and led triggers
- *
- * Copyright (C) 2005 John Lenz <lenz@cs.wisc.edu>
- * Copyright (C) 2005 Richard Purdie <rpurdie@openedhand.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-#ifndef __LINUX_LEDS_H_INCLUDED
-#define __LINUX_LEDS_H_INCLUDED
-
-#include <linux/list.h>
-#include <linux/spinlock.h>
-#include <linux/rwsem.h>
-#include <linux/timer.h>
-
-struct device;
-/*
- * LED Core
- */
-
-enum led_brightness {
-	LED_OFF		= 0,
-	LED_HALF	= 127,
-	LED_FULL	= 255,
-};
-
-struct led_classdev {
-	const char		*name;
-	int			 brightness;
-	int			 max_brightness;
-	int			 flags;
-
-	/* Lower 16 bits reflect status */
-#define LED_SUSPENDED		(1 << 0)
-	/* Upper 16 bits reflect control information */
-#define LED_CORE_SUSPENDRESUME	(1 << 16)
-
-	/* Set LED brightness level */
-	/* Must not sleep, use a workqueue if needed */
-	void		(*brightness_set)(struct led_classdev *led_cdev,
-					  enum led_brightness brightness);
-	/* Get LED brightness level */
-	enum led_brightness (*brightness_get)(struct led_classdev *led_cdev);
-
-	/*
-	 * Activate hardware accelerated blink, delays are in milliseconds
-	 * and if both are zero then a sensible default should be chosen.
-	 * The call should adjust the timings in that case and if it can't
-	 * match the values specified exactly.
-	 * Deactivate blinking again when the brightness is set to a fixed
-	 * value via the brightness_set() callback.
-	 */
-	int		(*blink_set)(struct led_classdev *led_cdev,
-				     unsigned long *delay_on,
-				     unsigned long *delay_off);
-
-	struct device		*dev;
-	struct list_head	 node;			/* LED Device list */
-	const char		*default_trigger;	/* Trigger to use */
-
-	unsigned long		 blink_delay_on, blink_delay_off;
-	struct timer_list	 blink_timer;
-	int			 blink_brightness;
-
-#ifdef CONFIG_LEDS_TRIGGERS
-	/* Protects the trigger data below */
-	struct rw_semaphore	 trigger_lock;
-
-	struct led_trigger	*trigger;
-	struct list_head	 trig_list;
-	void			*trigger_data;
-#endif
-};
-
-extern int led_classdev_register(struct device *parent,
-				 struct led_classdev *led_cdev);
-extern void led_classdev_unregister(struct led_classdev *led_cdev);
-extern void led_classdev_suspend(struct led_classdev *led_cdev);
-extern void led_classdev_resume(struct led_classdev *led_cdev);
-
-/**
- * led_blink_set - set blinking with software fallback
- * @led_cdev: the LED to start blinking
- * @delay_on: the time it should be on (in ms)
- * @delay_off: the time it should ble off (in ms)
- *
- * This function makes the LED blink, attempting to use the
- * hardware acceleration if possible, but falling back to
- * software blinking if there is no hardware blinking or if
- * the LED refuses the passed values.
- *
- * Note that if software blinking is active, simply calling
- * led_cdev->brightness_set() will not stop the blinking,
- * use led_classdev_brightness_set() instead.
- */
-extern void led_blink_set(struct led_classdev *led_cdev,
-			  unsigned long *delay_on,
-			  unsigned long *delay_off);
-/**
- * led_brightness_set - set LED brightness
- * @led_cdev: the LED to set
- * @brightness: the brightness to set it to
- *
- * Set an LED's brightness, and, if necessary, cancel the
- * software blink timer that implements blinking when the
- * hardware doesn't.
- */
-extern void led_brightness_set(struct led_classdev *led_cdev,
-			       enum led_brightness brightness);
-
-/*
- * LED Triggers
- */
-#ifdef CONFIG_LEDS_TRIGGERS
-
-#define TRIG_NAME_MAX 50
-
-struct led_trigger {
-	/* Trigger Properties */
-	const char	 *name;
-	void		(*activate)(struct led_classdev *led_cdev);
-	void		(*deactivate)(struct led_classdev *led_cdev);
-
-	/* LEDs under control by this trigger (for simple triggers) */
-	rwlock_t	  leddev_list_lock;
-	struct list_head  led_cdevs;
-
-	/* Link to next registered trigger */
-	struct list_head  next_trig;
-};
-
-/* Registration functions for complex triggers */
-extern int led_trigger_register(struct led_trigger *trigger);
-extern void led_trigger_unregister(struct led_trigger *trigger);
-
-/* Registration functions for simple triggers */
-#define DEFINE_LED_TRIGGER(x)		static struct led_trigger *x;
-#define DEFINE_LED_TRIGGER_GLOBAL(x)	struct led_trigger *x;
-extern void led_trigger_register_simple(const char *name,
-				struct led_trigger **trigger);
-extern void led_trigger_unregister_simple(struct led_trigger *trigger);
-extern void led_trigger_event(struct led_trigger *trigger,
-				enum led_brightness event);
-extern void led_trigger_blink(struct led_trigger *trigger,
-			      unsigned long *delay_on,
-			      unsigned long *delay_off);
-
-#else
-
-/* Triggers aren't active - null macros */
-#define DEFINE_LED_TRIGGER(x)
-#define DEFINE_LED_TRIGGER_GLOBAL(x)
-#define led_trigger_register_simple(x, y) do {} while(0)
-#define led_trigger_unregister_simple(x) do {} while(0)
-#define led_trigger_event(x, y) do {} while(0)
-
-#endif
-
-/* Trigger specific functions */
-#ifdef CONFIG_LEDS_TRIGGER_IDE_DISK
-extern void ledtrig_ide_activity(void);
-#else
-#define ledtrig_ide_activity() do {} while(0)
-#endif
-
-/*
- * Generic LED platform data for describing LED names and default triggers.
- */
-struct led_info {
-	const char	*name;
-	const char	*default_trigger;
-	int		flags;
-};
-
-struct led_platform_data {
-	int		num_leds;
-	struct led_info	*leds;
-};
-
-/* For the leds-gpio driver */
-struct gpio_led {
-	const char *name;
-	const char *default_trigger;
-	unsigned 	gpio;
-	unsigned	active_low : 1;
-	unsigned	retain_state_suspended : 1;
-	unsigned	default_state : 2;
-	/* default_state should be one of LEDS_GPIO_DEFSTATE_(ON|OFF|KEEP) */
-};
-#define LEDS_GPIO_DEFSTATE_OFF		0
-#define LEDS_GPIO_DEFSTATE_ON		1
-#define LEDS_GPIO_DEFSTATE_KEEP		2
-
-struct gpio_led_platform_data {
-	int 		num_leds;
-	const struct gpio_led *leds;
-
-#define GPIO_LED_NO_BLINK_LOW	0	/* No blink GPIO state low */
-#define GPIO_LED_NO_BLINK_HIGH	1	/* No blink GPIO state high */
-#define GPIO_LED_BLINK		2	/* Please, blink */
-	int		(*gpio_blink_set)(unsigned gpio, int state,
-					unsigned long *delay_on,
-					unsigned long *delay_off);
-};
-
-struct platform_device *gpio_led_register_device(
-		int id, const struct gpio_led_platform_data *pdata);
-
-#endif		/* __LINUX_LEDS_H_INCLUDED */
diff --git a/ANDROID_3.4.5/include/linux/leds_pwm.h b/ANDROID_3.4.5/include/linux/leds_pwm.h
deleted file mode 100644
index 33a07116..00000000
--- a/ANDROID_3.4.5/include/linux/leds_pwm.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * PWM LED driver data - see drivers/leds/leds-pwm.c
- */
-#ifndef __LINUX_LEDS_PWM_H
-#define __LINUX_LEDS_PWM_H
-
-struct led_pwm {
-	const char	*name;
-	const char	*default_trigger;
-	unsigned	pwm_id;
-	u8 		active_low;
-	unsigned 	max_brightness;
-	unsigned	pwm_period_ns;
-};
-
-struct led_pwm_platform_data {
-	int			num_leds;
-	struct led_pwm	*leds;
-};
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/lglock.h b/ANDROID_3.4.5/include/linux/lglock.h
deleted file mode 100644
index 87f402cc..00000000
--- a/ANDROID_3.4.5/include/linux/lglock.h
+++ /dev/null
@@ -1,200 +0,0 @@
-/*
- * Specialised local-global spinlock. Can only be declared as global variables
- * to avoid overhead and keep things simple (and we don't want to start using
- * these inside dynamically allocated structures).
- *
- * "local/global locks" (lglocks) can be used to:
- *
- * - Provide fast exclusive access to per-CPU data, with exclusive access to
- *   another CPU's data allowed but possibly subject to contention, and to
- *   provide very slow exclusive access to all per-CPU data.
- * - Or to provide very fast and scalable read serialisation, and to provide
- *   very slow exclusive serialisation of data (not necessarily per-CPU data).
- *
- * Brlocks are also implemented as a short-hand notation for the latter use
- * case.
- *
- * Copyright 2009, 2010, Nick Piggin, Novell Inc.
- */
-#ifndef __LINUX_LGLOCK_H
-#define __LINUX_LGLOCK_H
-
-#include <linux/spinlock.h>
-#include <linux/lockdep.h>
-#include <linux/percpu.h>
-#include <linux/cpu.h>
-
-/* can make br locks by using local lock for read side, global lock for write */
-#define br_lock_init(name)	name##_lock_init()
-#define br_read_lock(name)	name##_local_lock()
-#define br_read_unlock(name)	name##_local_unlock()
-#define br_write_lock(name)	name##_global_lock_online()
-#define br_write_unlock(name)	name##_global_unlock_online()
-
-#define DECLARE_BRLOCK(name)	DECLARE_LGLOCK(name)
-#define DEFINE_BRLOCK(name)	DEFINE_LGLOCK(name)
-
-
-#define lg_lock_init(name)	name##_lock_init()
-#define lg_local_lock(name)	name##_local_lock()
-#define lg_local_unlock(name)	name##_local_unlock()
-#define lg_local_lock_cpu(name, cpu)	name##_local_lock_cpu(cpu)
-#define lg_local_unlock_cpu(name, cpu)	name##_local_unlock_cpu(cpu)
-#define lg_global_lock(name)	name##_global_lock()
-#define lg_global_unlock(name)	name##_global_unlock()
-#define lg_global_lock_online(name) name##_global_lock_online()
-#define lg_global_unlock_online(name) name##_global_unlock_online()
-
-#ifdef CONFIG_DEBUG_LOCK_ALLOC
-#define LOCKDEP_INIT_MAP lockdep_init_map
-
-#define DEFINE_LGLOCK_LOCKDEP(name)					\
- struct lock_class_key name##_lock_key;					\
- struct lockdep_map name##_lock_dep_map;				\
- EXPORT_SYMBOL(name##_lock_dep_map)
-
-#else
-#define LOCKDEP_INIT_MAP(a, b, c, d)
-
-#define DEFINE_LGLOCK_LOCKDEP(name)
-#endif
-
-
-#define DECLARE_LGLOCK(name)						\
- extern void name##_lock_init(void);					\
- extern void name##_local_lock(void);					\
- extern void name##_local_unlock(void);					\
- extern void name##_local_lock_cpu(int cpu);				\
- extern void name##_local_unlock_cpu(int cpu);				\
- extern void name##_global_lock(void);					\
- extern void name##_global_unlock(void);				\
- extern void name##_global_lock_online(void);				\
- extern void name##_global_unlock_online(void);				\
-
-#define DEFINE_LGLOCK(name)						\
-									\
- DEFINE_SPINLOCK(name##_cpu_lock);					\
- cpumask_t name##_cpus __read_mostly;					\
- DEFINE_PER_CPU(arch_spinlock_t, name##_lock);				\
- DEFINE_LGLOCK_LOCKDEP(name);						\
-									\
- static int								\
- name##_lg_cpu_callback(struct notifier_block *nb,			\
-				unsigned long action, void *hcpu)	\
- {									\
-	switch (action & ~CPU_TASKS_FROZEN) {				\
-	case CPU_UP_PREPARE:						\
-		spin_lock(&name##_cpu_lock);				\
-		cpu_set((unsigned long)hcpu, name##_cpus);		\
-		spin_unlock(&name##_cpu_lock);				\
-		break;							\
-	case CPU_UP_CANCELED: case CPU_DEAD:				\
-		spin_lock(&name##_cpu_lock);				\
-		cpu_clear((unsigned long)hcpu, name##_cpus);		\
-		spin_unlock(&name##_cpu_lock);				\
-	}								\
-	return NOTIFY_OK;						\
- }									\
- static struct notifier_block name##_lg_cpu_notifier = {		\
-	.notifier_call = name##_lg_cpu_callback,			\
- };									\
- void name##_lock_init(void) {						\
-	int i;								\
-	LOCKDEP_INIT_MAP(&name##_lock_dep_map, #name, &name##_lock_key, 0); \
-	for_each_possible_cpu(i) {					\
-		arch_spinlock_t *lock;					\
-		lock = &per_cpu(name##_lock, i);			\
-		*lock = (arch_spinlock_t)__ARCH_SPIN_LOCK_UNLOCKED;	\
-	}								\
-	register_hotcpu_notifier(&name##_lg_cpu_notifier);		\
-	get_online_cpus();						\
-	for_each_online_cpu(i)						\
-		cpu_set(i, name##_cpus);				\
-	put_online_cpus();						\
- }									\
- EXPORT_SYMBOL(name##_lock_init);					\
-									\
- void name##_local_lock(void) {						\
-	arch_spinlock_t *lock;						\
-	preempt_disable();						\
-	rwlock_acquire_read(&name##_lock_dep_map, 0, 0, _THIS_IP_);	\
-	lock = &__get_cpu_var(name##_lock);				\
-	arch_spin_lock(lock);						\
- }									\
- EXPORT_SYMBOL(name##_local_lock);					\
-									\
- void name##_local_unlock(void) {					\
-	arch_spinlock_t *lock;						\
-	rwlock_release(&name##_lock_dep_map, 1, _THIS_IP_);		\
-	lock = &__get_cpu_var(name##_lock);				\
-	arch_spin_unlock(lock);						\
-	preempt_enable();						\
- }									\
- EXPORT_SYMBOL(name##_local_unlock);					\
-									\
- void name##_local_lock_cpu(int cpu) {					\
-	arch_spinlock_t *lock;						\
-	preempt_disable();						\
-	rwlock_acquire_read(&name##_lock_dep_map, 0, 0, _THIS_IP_);	\
-	lock = &per_cpu(name##_lock, cpu);				\
-	arch_spin_lock(lock);						\
- }									\
- EXPORT_SYMBOL(name##_local_lock_cpu);					\
-									\
- void name##_local_unlock_cpu(int cpu) {				\
-	arch_spinlock_t *lock;						\
-	rwlock_release(&name##_lock_dep_map, 1, _THIS_IP_);		\
-	lock = &per_cpu(name##_lock, cpu);				\
-	arch_spin_unlock(lock);						\
-	preempt_enable();						\
- }									\
- EXPORT_SYMBOL(name##_local_unlock_cpu);				\
-									\
- void name##_global_lock_online(void) {					\
-	int i;								\
-	spin_lock(&name##_cpu_lock);					\
-	rwlock_acquire(&name##_lock_dep_map, 0, 0, _RET_IP_);		\
-	for_each_cpu(i, &name##_cpus) {					\
-		arch_spinlock_t *lock;					\
-		lock = &per_cpu(name##_lock, i);			\
-		arch_spin_lock(lock);					\
-	}								\
- }									\
- EXPORT_SYMBOL(name##_global_lock_online);				\
-									\
- void name##_global_unlock_online(void) {				\
-	int i;								\
-	rwlock_release(&name##_lock_dep_map, 1, _RET_IP_);		\
-	for_each_cpu(i, &name##_cpus) {					\
-		arch_spinlock_t *lock;					\
-		lock = &per_cpu(name##_lock, i);			\
-		arch_spin_unlock(lock);					\
-	}								\
-	spin_unlock(&name##_cpu_lock);					\
- }									\
- EXPORT_SYMBOL(name##_global_unlock_online);				\
-									\
- void name##_global_lock(void) {					\
-	int i;								\
-	preempt_disable();						\
-	rwlock_acquire(&name##_lock_dep_map, 0, 0, _RET_IP_);		\
-	for_each_possible_cpu(i) {					\
-		arch_spinlock_t *lock;					\
-		lock = &per_cpu(name##_lock, i);			\
-		arch_spin_lock(lock);					\
-	}								\
- }									\
- EXPORT_SYMBOL(name##_global_lock);					\
-									\
- void name##_global_unlock(void) {					\
-	int i;								\
-	rwlock_release(&name##_lock_dep_map, 1, _RET_IP_);		\
-	for_each_possible_cpu(i) {					\
-		arch_spinlock_t *lock;					\
-		lock = &per_cpu(name##_lock, i);			\
-		arch_spin_unlock(lock);					\
-	}								\
-	preempt_enable();						\
- }									\
- EXPORT_SYMBOL(name##_global_unlock);
-#endif
diff --git a/ANDROID_3.4.5/include/linux/lguest.h b/ANDROID_3.4.5/include/linux/lguest.h
deleted file mode 100644
index 9962c6bb..00000000
--- a/ANDROID_3.4.5/include/linux/lguest.h
+++ /dev/null
@@ -1,73 +0,0 @@
-/*
- * Things the lguest guest needs to know.  Note: like all lguest interfaces,
- * this is subject to wild and random change between versions.
- */
-#ifndef _LINUX_LGUEST_H
-#define _LINUX_LGUEST_H
-
-#ifndef __ASSEMBLY__
-#include <linux/time.h>
-#include <asm/irq.h>
-#include <asm/lguest_hcall.h>
-
-#define LG_CLOCK_MIN_DELTA	100UL
-#define LG_CLOCK_MAX_DELTA	ULONG_MAX
-
-/*G:031
- * The second method of communicating with the Host is to via "struct
- * lguest_data".  Once the Guest's initialization hypercall tells the Host where
- * this is, the Guest and Host both publish information in it.
-:*/
-struct lguest_data {
-	/*
-	 * 512 == enabled (same as eflags in normal hardware).  The Guest
-	 * changes interrupts so often that a hypercall is too slow.
-	 */
-	unsigned int irq_enabled;
-	/* Fine-grained interrupt disabling by the Guest */
-	DECLARE_BITMAP(blocked_interrupts, LGUEST_IRQS);
-
-	/*
-	 * The Host writes the virtual address of the last page fault here,
-	 * which saves the Guest a hypercall.  CR2 is the native register where
-	 * this address would normally be found.
-	 */
-	unsigned long cr2;
-
-	/* Wallclock time set by the Host. */
-	struct timespec time;
-
-	/*
-	 * Interrupt pending set by the Host.  The Guest should do a hypercall
-	 * if it re-enables interrupts and sees this set (to X86_EFLAGS_IF).
-	 */
-	int irq_pending;
-
-	/*
-	 * Async hypercall ring.  Instead of directly making hypercalls, we can
-	 * place them in here for processing the next time the Host wants.
-	 * This batching can be quite efficient.
-	 */
-
-	/* 0xFF == done (set by Host), 0 == pending (set by Guest). */
-	u8 hcall_status[LHCALL_RING_SIZE];
-	/* The actual registers for the hypercalls. */
-	struct hcall_args hcalls[LHCALL_RING_SIZE];
-
-/* Fields initialized by the Host at boot: */
-	/* Memory not to try to access */
-	unsigned long reserve_mem;
-	/* KHz for the TSC clock. */
-	u32 tsc_khz;
-
-/* Fields initialized by the Guest at boot: */
-	/* Instruction range to suppress interrupts even if enabled */
-	unsigned long noirq_start, noirq_end;
-	/* Address above which page tables are all identical. */
-	unsigned long kernel_address;
-	/* The vector to try to use for system calls (0x40 or 0x80). */
-	unsigned int syscall_vec;
-};
-extern struct lguest_data lguest_data;
-#endif /* __ASSEMBLY__ */
-#endif	/* _LINUX_LGUEST_H */
diff --git a/ANDROID_3.4.5/include/linux/lguest_launcher.h b/ANDROID_3.4.5/include/linux/lguest_launcher.h
deleted file mode 100644
index 495203ff..00000000
--- a/ANDROID_3.4.5/include/linux/lguest_launcher.h
+++ /dev/null
@@ -1,73 +0,0 @@
-#ifndef _LINUX_LGUEST_LAUNCHER
-#define _LINUX_LGUEST_LAUNCHER
-/* Everything the "lguest" userspace program needs to know. */
-#include <linux/types.h>
-
-/*D:010
- * Drivers
- *
- * The Guest needs devices to do anything useful.  Since we don't let it touch
- * real devices (think of the damage it could do!) we provide virtual devices.
- * We could emulate a PCI bus with various devices on it, but that is a fairly
- * complex burden for the Host and suboptimal for the Guest, so we have our own
- * simple lguest bus and we use "virtio" drivers.  These drivers need a set of
- * routines from us which will actually do the virtual I/O, but they handle all
- * the net/block/console stuff themselves.  This means that if we want to add
- * a new device, we simply need to write a new virtio driver and create support
- * for it in the Launcher: this code won't need to change.
- *
- * Virtio devices are also used by kvm, so we can simply reuse their optimized
- * device drivers.  And one day when everyone uses virtio, my plan will be
- * complete.  Bwahahahah!
- *
- * Devices are described by a simplified ID, a status byte, and some "config"
- * bytes which describe this device's configuration.  This is placed by the
- * Launcher just above the top of physical memory:
- */
-struct lguest_device_desc {
-	/* The device type: console, network, disk etc.  Type 0 terminates. */
-	__u8 type;
-	/* The number of virtqueues (first in config array) */
-	__u8 num_vq;
-	/*
-	 * The number of bytes of feature bits.  Multiply by 2: one for host
-	 * features and one for Guest acknowledgements.
-	 */
-	__u8 feature_len;
-	/* The number of bytes of the config array after virtqueues. */
-	__u8 config_len;
-	/* A status byte, written by the Guest. */
-	__u8 status;
-	__u8 config[0];
-};
-
-/*D:135
- * This is how we expect the device configuration field for a virtqueue
- * to be laid out in config space.
- */
-struct lguest_vqconfig {
-	/* The number of entries in the virtio_ring */
-	__u16 num;
-	/* The interrupt we get when something happens. */
-	__u16 irq;
-	/* The page number of the virtio ring for this device. */
-	__u32 pfn;
-};
-/*:*/
-
-/* Write command first word is a request. */
-enum lguest_req
-{
-	LHREQ_INITIALIZE, /* + base, pfnlimit, start */
-	LHREQ_GETDMA, /* No longer used */
-	LHREQ_IRQ, /* + irq */
-	LHREQ_BREAK, /* No longer used */
-	LHREQ_EVENTFD, /* + address, fd. */
-};
-
-/*
- * The alignment to use between consumer and producer parts of vring.
- * x86 pagesize for historical reasons.
- */
-#define LGUEST_VRING_ALIGN	4096
-#endif /* _LINUX_LGUEST_LAUNCHER */
diff --git a/ANDROID_3.4.5/include/linux/libata.h b/ANDROID_3.4.5/include/linux/libata.h
deleted file mode 100644
index 6e887c74..00000000
--- a/ANDROID_3.4.5/include/linux/libata.h
+++ /dev/null
@@ -1,1786 +0,0 @@
-/*
- *  Copyright 2003-2005 Red Hat, Inc.  All rights reserved.
- *  Copyright 2003-2005 Jeff Garzik
- *
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2, or (at your option)
- *  any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; see the file COPYING.  If not, write to
- *  the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- *
- *  libata documentation is available via 'make {ps|pdf}docs',
- *  as Documentation/DocBook/libata.*
- *
- */
-
-#ifndef __LINUX_LIBATA_H__
-#define __LINUX_LIBATA_H__
-
-#include <linux/delay.h>
-#include <linux/jiffies.h>
-#include <linux/interrupt.h>
-#include <linux/dma-mapping.h>
-#include <linux/scatterlist.h>
-#include <linux/io.h>
-#include <linux/ata.h>
-#include <linux/workqueue.h>
-#include <scsi/scsi_host.h>
-#include <linux/acpi.h>
-#include <linux/cdrom.h>
-#include <linux/sched.h>
-
-/*
- * Define if arch has non-standard setup.  This is a _PCI_ standard
- * not a legacy or ISA standard.
- */
-#ifdef CONFIG_ATA_NONSTANDARD
-#include <asm/libata-portmap.h>
-#else
-#include <asm-generic/libata-portmap.h>
-#endif
-
-/*
- * compile-time options: to be removed as soon as all the drivers are
- * converted to the new debugging mechanism
- */
-#undef ATA_DEBUG		/* debugging output */
-#undef ATA_VERBOSE_DEBUG	/* yet more debugging output */
-#undef ATA_IRQ_TRAP		/* define to ack screaming irqs */
-#undef ATA_NDEBUG		/* define to disable quick runtime checks */
-
-
-/* note: prints function name for you */
-#ifdef ATA_DEBUG
-#define DPRINTK(fmt, args...) printk(KERN_ERR "%s: " fmt, __func__, ## args)
-#ifdef ATA_VERBOSE_DEBUG
-#define VPRINTK(fmt, args...) printk(KERN_ERR "%s: " fmt, __func__, ## args)
-#else
-#define VPRINTK(fmt, args...)
-#endif	/* ATA_VERBOSE_DEBUG */
-#else
-#define DPRINTK(fmt, args...)
-#define VPRINTK(fmt, args...)
-#endif	/* ATA_DEBUG */
-
-#define BPRINTK(fmt, args...) if (ap->flags & ATA_FLAG_DEBUGMSG) printk(KERN_ERR "%s: " fmt, __func__, ## args)
-
-#define ata_print_version_once(dev, version)			\
-({								\
-	static bool __print_once;				\
-								\
-	if (!__print_once) {					\
-		__print_once = true;				\
-		ata_print_version(dev, version);		\
-	}							\
-})
-
-/* NEW: debug levels */
-#define HAVE_LIBATA_MSG 1
-
-enum {
-	ATA_MSG_DRV	= 0x0001,
-	ATA_MSG_INFO	= 0x0002,
-	ATA_MSG_PROBE	= 0x0004,
-	ATA_MSG_WARN	= 0x0008,
-	ATA_MSG_MALLOC	= 0x0010,
-	ATA_MSG_CTL	= 0x0020,
-	ATA_MSG_INTR	= 0x0040,
-	ATA_MSG_ERR	= 0x0080,
-};
-
-#define ata_msg_drv(p)    ((p)->msg_enable & ATA_MSG_DRV)
-#define ata_msg_info(p)   ((p)->msg_enable & ATA_MSG_INFO)
-#define ata_msg_probe(p)  ((p)->msg_enable & ATA_MSG_PROBE)
-#define ata_msg_warn(p)   ((p)->msg_enable & ATA_MSG_WARN)
-#define ata_msg_malloc(p) ((p)->msg_enable & ATA_MSG_MALLOC)
-#define ata_msg_ctl(p)    ((p)->msg_enable & ATA_MSG_CTL)
-#define ata_msg_intr(p)   ((p)->msg_enable & ATA_MSG_INTR)
-#define ata_msg_err(p)    ((p)->msg_enable & ATA_MSG_ERR)
-
-static inline u32 ata_msg_init(int dval, int default_msg_enable_bits)
-{
-	if (dval < 0 || dval >= (sizeof(u32) * 8))
-		return default_msg_enable_bits; /* should be 0x1 - only driver info msgs */
-	if (!dval)
-		return 0;
-	return (1 << dval) - 1;
-}
-
-/* defines only for the constants which don't work well as enums */
-#define ATA_TAG_POISON		0xfafbfcfdU
-
-enum {
-	/* various global constants */
-	LIBATA_MAX_PRD		= ATA_MAX_PRD / 2,
-	LIBATA_DUMB_MAX_PRD	= ATA_MAX_PRD / 4,	/* Worst case */
-	ATA_DEF_QUEUE		= 1,
-	/* tag ATA_MAX_QUEUE - 1 is reserved for internal commands */
-	ATA_MAX_QUEUE		= 32,
-	ATA_TAG_INTERNAL	= ATA_MAX_QUEUE - 1,
-	ATA_SHORT_PAUSE		= 16,
-
-	ATAPI_MAX_DRAIN		= 16 << 10,
-
-	ATA_ALL_DEVICES		= (1 << ATA_MAX_DEVICES) - 1,
-
-	ATA_SHT_EMULATED	= 1,
-	ATA_SHT_CMD_PER_LUN	= 1,
-	ATA_SHT_THIS_ID		= -1,
-	ATA_SHT_USE_CLUSTERING	= 1,
-
-	/* struct ata_device stuff */
-	ATA_DFLAG_LBA		= (1 << 0), /* device supports LBA */
-	ATA_DFLAG_LBA48		= (1 << 1), /* device supports LBA48 */
-	ATA_DFLAG_CDB_INTR	= (1 << 2), /* device asserts INTRQ when ready for CDB */
-	ATA_DFLAG_NCQ		= (1 << 3), /* device supports NCQ */
-	ATA_DFLAG_FLUSH_EXT	= (1 << 4), /* do FLUSH_EXT instead of FLUSH */
-	ATA_DFLAG_ACPI_PENDING	= (1 << 5), /* ACPI resume action pending */
-	ATA_DFLAG_ACPI_FAILED	= (1 << 6), /* ACPI on devcfg has failed */
-	ATA_DFLAG_AN		= (1 << 7), /* AN configured */
-	ATA_DFLAG_DMADIR	= (1 << 10), /* device requires DMADIR */
-	ATA_DFLAG_CFG_MASK	= (1 << 12) - 1,
-
-	ATA_DFLAG_PIO		= (1 << 12), /* device limited to PIO mode */
-	ATA_DFLAG_NCQ_OFF	= (1 << 13), /* device limited to non-NCQ mode */
-	ATA_DFLAG_SLEEPING	= (1 << 15), /* device is sleeping */
-	ATA_DFLAG_DUBIOUS_XFER	= (1 << 16), /* data transfer not verified */
-	ATA_DFLAG_NO_UNLOAD	= (1 << 17), /* device doesn't support unload */
-	ATA_DFLAG_UNLOCK_HPA	= (1 << 18), /* unlock HPA */
-	ATA_DFLAG_INIT_MASK	= (1 << 24) - 1,
-
-	ATA_DFLAG_DETACH	= (1 << 24),
-	ATA_DFLAG_DETACHED	= (1 << 25),
-
-	ATA_DEV_UNKNOWN		= 0,	/* unknown device */
-	ATA_DEV_ATA		= 1,	/* ATA device */
-	ATA_DEV_ATA_UNSUP	= 2,	/* ATA device (unsupported) */
-	ATA_DEV_ATAPI		= 3,	/* ATAPI device */
-	ATA_DEV_ATAPI_UNSUP	= 4,	/* ATAPI device (unsupported) */
-	ATA_DEV_PMP		= 5,	/* SATA port multiplier */
-	ATA_DEV_PMP_UNSUP	= 6,	/* SATA port multiplier (unsupported) */
-	ATA_DEV_SEMB		= 7,	/* SEMB */
-	ATA_DEV_SEMB_UNSUP	= 8,	/* SEMB (unsupported) */
-	ATA_DEV_NONE		= 9,	/* no device */
-
-	/* struct ata_link flags */
-	ATA_LFLAG_NO_HRST	= (1 << 1), /* avoid hardreset */
-	ATA_LFLAG_NO_SRST	= (1 << 2), /* avoid softreset */
-	ATA_LFLAG_ASSUME_ATA	= (1 << 3), /* assume ATA class */
-	ATA_LFLAG_ASSUME_SEMB	= (1 << 4), /* assume SEMB class */
-	ATA_LFLAG_ASSUME_CLASS	= ATA_LFLAG_ASSUME_ATA | ATA_LFLAG_ASSUME_SEMB,
-	ATA_LFLAG_NO_RETRY	= (1 << 5), /* don't retry this link */
-	ATA_LFLAG_DISABLED	= (1 << 6), /* link is disabled */
-	ATA_LFLAG_SW_ACTIVITY	= (1 << 7), /* keep activity stats */
-	ATA_LFLAG_NO_LPM	= (1 << 8), /* disable LPM on this link */
-
-	/* struct ata_port flags */
-	ATA_FLAG_SLAVE_POSS	= (1 << 0), /* host supports slave dev */
-					    /* (doesn't imply presence) */
-	ATA_FLAG_SATA		= (1 << 1),
-	ATA_FLAG_NO_ATAPI	= (1 << 6), /* No ATAPI support */
-	ATA_FLAG_PIO_DMA	= (1 << 7), /* PIO cmds via DMA */
-	ATA_FLAG_PIO_LBA48	= (1 << 8), /* Host DMA engine is LBA28 only */
-	ATA_FLAG_PIO_POLLING	= (1 << 9), /* use polling PIO if LLD
-					     * doesn't handle PIO interrupts */
-	ATA_FLAG_NCQ		= (1 << 10), /* host supports NCQ */
-	ATA_FLAG_NO_POWEROFF_SPINDOWN = (1 << 11), /* don't spindown before poweroff */
-	ATA_FLAG_NO_HIBERNATE_SPINDOWN = (1 << 12), /* don't spindown before hibernation */
-	ATA_FLAG_DEBUGMSG	= (1 << 13),
-	ATA_FLAG_FPDMA_AA		= (1 << 14), /* driver supports Auto-Activate */
-	ATA_FLAG_IGN_SIMPLEX	= (1 << 15), /* ignore SIMPLEX */
-	ATA_FLAG_NO_IORDY	= (1 << 16), /* controller lacks iordy */
-	ATA_FLAG_ACPI_SATA	= (1 << 17), /* need native SATA ACPI layout */
-	ATA_FLAG_AN		= (1 << 18), /* controller supports AN */
-	ATA_FLAG_PMP		= (1 << 19), /* controller supports PMP */
-	ATA_FLAG_EM		= (1 << 21), /* driver supports enclosure
-					      * management */
-	ATA_FLAG_SW_ACTIVITY	= (1 << 22), /* driver supports sw activity
-					      * led */
-	ATA_FLAG_NO_DIPM	= (1 << 23), /* host not happy with DIPM */
-
-	/* bits 24:31 of ap->flags are reserved for LLD specific flags */
-
-
-	/* struct ata_port pflags */
-	ATA_PFLAG_EH_PENDING	= (1 << 0), /* EH pending */
-	ATA_PFLAG_EH_IN_PROGRESS = (1 << 1), /* EH in progress */
-	ATA_PFLAG_FROZEN	= (1 << 2), /* port is frozen */
-	ATA_PFLAG_RECOVERED	= (1 << 3), /* recovery action performed */
-	ATA_PFLAG_LOADING	= (1 << 4), /* boot/loading probe */
-	ATA_PFLAG_SCSI_HOTPLUG	= (1 << 6), /* SCSI hotplug scheduled */
-	ATA_PFLAG_INITIALIZING	= (1 << 7), /* being initialized, don't touch */
-	ATA_PFLAG_RESETTING	= (1 << 8), /* reset in progress */
-	ATA_PFLAG_UNLOADING	= (1 << 9), /* driver is being unloaded */
-	ATA_PFLAG_UNLOADED	= (1 << 10), /* driver is unloaded */
-
-	ATA_PFLAG_SUSPENDED	= (1 << 17), /* port is suspended (power) */
-	ATA_PFLAG_PM_PENDING	= (1 << 18), /* PM operation pending */
-	ATA_PFLAG_INIT_GTM_VALID = (1 << 19), /* initial gtm data valid */
-
-	ATA_PFLAG_PIO32		= (1 << 20),  /* 32bit PIO */
-	ATA_PFLAG_PIO32CHANGE	= (1 << 21),  /* 32bit PIO can be turned on/off */
-
-	/* struct ata_queued_cmd flags */
-	ATA_QCFLAG_ACTIVE	= (1 << 0), /* cmd not yet ack'd to scsi lyer */
-	ATA_QCFLAG_DMAMAP	= (1 << 1), /* SG table is DMA mapped */
-	ATA_QCFLAG_IO		= (1 << 3), /* standard IO command */
-	ATA_QCFLAG_RESULT_TF	= (1 << 4), /* result TF requested */
-	ATA_QCFLAG_CLEAR_EXCL	= (1 << 5), /* clear excl_link on completion */
-	ATA_QCFLAG_QUIET	= (1 << 6), /* don't report device error */
-	ATA_QCFLAG_RETRY	= (1 << 7), /* retry after failure */
-
-	ATA_QCFLAG_FAILED	= (1 << 16), /* cmd failed and is owned by EH */
-	ATA_QCFLAG_SENSE_VALID	= (1 << 17), /* sense data valid */
-	ATA_QCFLAG_EH_SCHEDULED = (1 << 18), /* EH scheduled (obsolete) */
-
-	/* host set flags */
-	ATA_HOST_SIMPLEX	= (1 << 0),	/* Host is simplex, one DMA channel per host only */
-	ATA_HOST_STARTED	= (1 << 1),	/* Host started */
-	ATA_HOST_PARALLEL_SCAN	= (1 << 2),	/* Ports on this host can be scanned in parallel */
-	ATA_HOST_IGNORE_ATA	= (1 << 3),	/* Ignore ATA devices on this host. */
-
-	/* bits 24:31 of host->flags are reserved for LLD specific flags */
-
-	/* various lengths of time */
-	ATA_TMOUT_BOOT		= 30000,	/* heuristic */
-	ATA_TMOUT_BOOT_QUICK	=  7000,	/* heuristic */
-	ATA_TMOUT_INTERNAL_QUICK = 5000,
-	ATA_TMOUT_MAX_PARK	= 30000,
-
-	/*
-	 * GoVault needs 2s and iVDR disk HHD424020F7SV00 800ms.  2s
-	 * is too much without parallel probing.  Use 2s if parallel
-	 * probing is available, 800ms otherwise.
-	 */
-	ATA_TMOUT_FF_WAIT_LONG	=  2000,
-	ATA_TMOUT_FF_WAIT	=   800,
-
-	/* Spec mandates to wait for ">= 2ms" before checking status
-	 * after reset.  We wait 150ms, because that was the magic
-	 * delay used for ATAPI devices in Hale Landis's ATADRVR, for
-	 * the period of time between when the ATA command register is
-	 * written, and then status is checked.  Because waiting for
-	 * "a while" before checking status is fine, post SRST, we
-	 * perform this magic delay here as well.
-	 *
-	 * Old drivers/ide uses the 2mS rule and then waits for ready.
-	 */
-	ATA_WAIT_AFTER_RESET	=  150,
-
-	/* If PMP is supported, we have to do follow-up SRST.  As some
-	 * PMPs don't send D2H Reg FIS after hardreset, LLDs are
-	 * advised to wait only for the following duration before
-	 * doing SRST.
-	 */
-	ATA_TMOUT_PMP_SRST_WAIT	= 5000,
-
-	/* ATA bus states */
-	BUS_UNKNOWN		= 0,
-	BUS_DMA			= 1,
-	BUS_IDLE		= 2,
-	BUS_NOINTR		= 3,
-	BUS_NODATA		= 4,
-	BUS_TIMER		= 5,
-	BUS_PIO			= 6,
-	BUS_EDD			= 7,
-	BUS_IDENTIFY		= 8,
-	BUS_PACKET		= 9,
-
-	/* SATA port states */
-	PORT_UNKNOWN		= 0,
-	PORT_ENABLED		= 1,
-	PORT_DISABLED		= 2,
-
-	/* encoding various smaller bitmaps into a single
-	 * unsigned long bitmap
-	 */
-	ATA_NR_PIO_MODES	= 7,
-	ATA_NR_MWDMA_MODES	= 5,
-	ATA_NR_UDMA_MODES	= 8,
-
-	ATA_SHIFT_PIO		= 0,
-	ATA_SHIFT_MWDMA		= ATA_SHIFT_PIO + ATA_NR_PIO_MODES,
-	ATA_SHIFT_UDMA		= ATA_SHIFT_MWDMA + ATA_NR_MWDMA_MODES,
-
-	/* size of buffer to pad xfers ending on unaligned boundaries */
-	ATA_DMA_PAD_SZ		= 4,
-
-	/* ering size */
-	ATA_ERING_SIZE		= 32,
-
-	/* return values for ->qc_defer */
-	ATA_DEFER_LINK		= 1,
-	ATA_DEFER_PORT		= 2,
-
-	/* desc_len for ata_eh_info and context */
-	ATA_EH_DESC_LEN		= 80,
-
-	/* reset / recovery action types */
-	ATA_EH_REVALIDATE	= (1 << 0),
-	ATA_EH_SOFTRESET	= (1 << 1), /* meaningful only in ->prereset */
-	ATA_EH_HARDRESET	= (1 << 2), /* meaningful only in ->prereset */
-	ATA_EH_RESET		= ATA_EH_SOFTRESET | ATA_EH_HARDRESET,
-	ATA_EH_ENABLE_LINK	= (1 << 3),
-	ATA_EH_PARK		= (1 << 5), /* unload heads and stop I/O */
-
-	ATA_EH_PERDEV_MASK	= ATA_EH_REVALIDATE | ATA_EH_PARK,
-	ATA_EH_ALL_ACTIONS	= ATA_EH_REVALIDATE | ATA_EH_RESET |
-				  ATA_EH_ENABLE_LINK,
-
-	/* ata_eh_info->flags */
-	ATA_EHI_HOTPLUGGED	= (1 << 0),  /* could have been hotplugged */
-	ATA_EHI_NO_AUTOPSY	= (1 << 2),  /* no autopsy */
-	ATA_EHI_QUIET		= (1 << 3),  /* be quiet */
-	ATA_EHI_NO_RECOVERY	= (1 << 4),  /* no recovery */
-
-	ATA_EHI_DID_SOFTRESET	= (1 << 16), /* already soft-reset this port */
-	ATA_EHI_DID_HARDRESET	= (1 << 17), /* already soft-reset this port */
-	ATA_EHI_PRINTINFO	= (1 << 18), /* print configuration info */
-	ATA_EHI_SETMODE		= (1 << 19), /* configure transfer mode */
-	ATA_EHI_POST_SETMODE	= (1 << 20), /* revalidating after setmode */
-
-	ATA_EHI_DID_RESET	= ATA_EHI_DID_SOFTRESET | ATA_EHI_DID_HARDRESET,
-
-	/* mask of flags to transfer *to* the slave link */
-	ATA_EHI_TO_SLAVE_MASK	= ATA_EHI_NO_AUTOPSY | ATA_EHI_QUIET,
-
-	/* max tries if error condition is still set after ->error_handler */
-	ATA_EH_MAX_TRIES	= 5,
-
-	/* sometimes resuming a link requires several retries */
-	ATA_LINK_RESUME_TRIES	= 5,
-
-	/* how hard are we gonna try to probe/recover devices */
-	ATA_PROBE_MAX_TRIES	= 3,
-	ATA_EH_DEV_TRIES	= 3,
-	ATA_EH_PMP_TRIES	= 5,
-	ATA_EH_PMP_LINK_TRIES	= 3,
-
-	SATA_PMP_RW_TIMEOUT	= 3000,		/* PMP read/write timeout */
-
-	/* This should match the actual table size of
-	 * ata_eh_cmd_timeout_table in libata-eh.c.
-	 */
-	ATA_EH_CMD_TIMEOUT_TABLE_SIZE = 6,
-
-	/* Horkage types. May be set by libata or controller on drives
-	   (some horkage may be drive/controller pair dependent */
-
-	ATA_HORKAGE_DIAGNOSTIC	= (1 << 0),	/* Failed boot diag */
-	ATA_HORKAGE_NODMA	= (1 << 1),	/* DMA problems */
-	ATA_HORKAGE_NONCQ	= (1 << 2),	/* Don't use NCQ */
-	ATA_HORKAGE_MAX_SEC_128	= (1 << 3),	/* Limit max sects to 128 */
-	ATA_HORKAGE_BROKEN_HPA	= (1 << 4),	/* Broken HPA */
-	ATA_HORKAGE_DISABLE	= (1 << 5),	/* Disable it */
-	ATA_HORKAGE_HPA_SIZE	= (1 << 6),	/* native size off by one */
-	ATA_HORKAGE_IVB		= (1 << 8),	/* cbl det validity bit bugs */
-	ATA_HORKAGE_STUCK_ERR	= (1 << 9),	/* stuck ERR on next PACKET */
-	ATA_HORKAGE_BRIDGE_OK	= (1 << 10),	/* no bridge limits */
-	ATA_HORKAGE_ATAPI_MOD16_DMA = (1 << 11), /* use ATAPI DMA for commands
-						    not multiple of 16 bytes */
-	ATA_HORKAGE_FIRMWARE_WARN = (1 << 12),	/* firmware update warning */
-	ATA_HORKAGE_1_5_GBPS	= (1 << 13),	/* force 1.5 Gbps */
-	ATA_HORKAGE_NOSETXFER	= (1 << 14),	/* skip SETXFER, SATA only */
-	ATA_HORKAGE_BROKEN_FPDMA_AA	= (1 << 15),	/* skip AA */
-	ATA_HORKAGE_DUMP_ID	= (1 << 16),	/* dump IDENTIFY data */
-
-	 /* DMA mask for user DMA control: User visible values; DO NOT
-	    renumber */
-	ATA_DMA_MASK_ATA	= (1 << 0),	/* DMA on ATA Disk */
-	ATA_DMA_MASK_ATAPI	= (1 << 1),	/* DMA on ATAPI */
-	ATA_DMA_MASK_CFA	= (1 << 2),	/* DMA on CF Card */
-
-	/* ATAPI command types */
-	ATAPI_READ		= 0,		/* READs */
-	ATAPI_WRITE		= 1,		/* WRITEs */
-	ATAPI_READ_CD		= 2,		/* READ CD [MSF] */
-	ATAPI_PASS_THRU		= 3,		/* SAT pass-thru */
-	ATAPI_MISC		= 4,		/* the rest */
-
-	/* Timing constants */
-	ATA_TIMING_SETUP	= (1 << 0),
-	ATA_TIMING_ACT8B	= (1 << 1),
-	ATA_TIMING_REC8B	= (1 << 2),
-	ATA_TIMING_CYC8B	= (1 << 3),
-	ATA_TIMING_8BIT		= ATA_TIMING_ACT8B | ATA_TIMING_REC8B |
-				  ATA_TIMING_CYC8B,
-	ATA_TIMING_ACTIVE	= (1 << 4),
-	ATA_TIMING_RECOVER	= (1 << 5),
-	ATA_TIMING_DMACK_HOLD	= (1 << 6),
-	ATA_TIMING_CYCLE	= (1 << 7),
-	ATA_TIMING_UDMA		= (1 << 8),
-	ATA_TIMING_ALL		= ATA_TIMING_SETUP | ATA_TIMING_ACT8B |
-				  ATA_TIMING_REC8B | ATA_TIMING_CYC8B |
-				  ATA_TIMING_ACTIVE | ATA_TIMING_RECOVER |
-				  ATA_TIMING_DMACK_HOLD | ATA_TIMING_CYCLE |
-				  ATA_TIMING_UDMA,
-
-	/* ACPI constants */
-	ATA_ACPI_FILTER_SETXFER	= 1 << 0,
-	ATA_ACPI_FILTER_LOCK	= 1 << 1,
-	ATA_ACPI_FILTER_DIPM	= 1 << 2,
-	ATA_ACPI_FILTER_FPDMA_OFFSET = 1 << 3,	/* FPDMA non-zero offset */
-	ATA_ACPI_FILTER_FPDMA_AA = 1 << 4,	/* FPDMA auto activate */
-
-	ATA_ACPI_FILTER_DEFAULT	= ATA_ACPI_FILTER_SETXFER |
-				  ATA_ACPI_FILTER_LOCK |
-				  ATA_ACPI_FILTER_DIPM,
-};
-
-enum ata_xfer_mask {
-	ATA_MASK_PIO		= ((1LU << ATA_NR_PIO_MODES) - 1)
-					<< ATA_SHIFT_PIO,
-	ATA_MASK_MWDMA		= ((1LU << ATA_NR_MWDMA_MODES) - 1)
-					<< ATA_SHIFT_MWDMA,
-	ATA_MASK_UDMA		= ((1LU << ATA_NR_UDMA_MODES) - 1)
-					<< ATA_SHIFT_UDMA,
-};
-
-enum hsm_task_states {
-	HSM_ST_IDLE,		/* no command on going */
-	HSM_ST_FIRST,		/* (waiting the device to)
-				   write CDB or first data block */
-	HSM_ST,			/* (waiting the device to) transfer data */
-	HSM_ST_LAST,		/* (waiting the device to) complete command */
-	HSM_ST_ERR,		/* error */
-};
-
-enum ata_completion_errors {
-	AC_ERR_DEV		= (1 << 0), /* device reported error */
-	AC_ERR_HSM		= (1 << 1), /* host state machine violation */
-	AC_ERR_TIMEOUT		= (1 << 2), /* timeout */
-	AC_ERR_MEDIA		= (1 << 3), /* media error */
-	AC_ERR_ATA_BUS		= (1 << 4), /* ATA bus error */
-	AC_ERR_HOST_BUS		= (1 << 5), /* host bus error */
-	AC_ERR_SYSTEM		= (1 << 6), /* system error */
-	AC_ERR_INVALID		= (1 << 7), /* invalid argument */
-	AC_ERR_OTHER		= (1 << 8), /* unknown */
-	AC_ERR_NODEV_HINT	= (1 << 9), /* polling device detection hint */
-	AC_ERR_NCQ		= (1 << 10), /* marker for offending NCQ qc */
-};
-
-/*
- * Link power management policy: If you alter this, you also need to
- * alter libata-scsi.c (for the ascii descriptions)
- */
-enum ata_lpm_policy {
-	ATA_LPM_UNKNOWN,
-	ATA_LPM_MAX_POWER,
-	ATA_LPM_MED_POWER,
-	ATA_LPM_MIN_POWER,
-};
-
-enum ata_lpm_hints {
-	ATA_LPM_EMPTY		= (1 << 0), /* port empty/probing */
-	ATA_LPM_HIPM		= (1 << 1), /* may use HIPM */
-};
-
-/* forward declarations */
-struct scsi_device;
-struct ata_port_operations;
-struct ata_port;
-struct ata_link;
-struct ata_queued_cmd;
-
-/* typedefs */
-typedef void (*ata_qc_cb_t) (struct ata_queued_cmd *qc);
-typedef int (*ata_prereset_fn_t)(struct ata_link *link, unsigned long deadline);
-typedef int (*ata_reset_fn_t)(struct ata_link *link, unsigned int *classes,
-			      unsigned long deadline);
-typedef void (*ata_postreset_fn_t)(struct ata_link *link, unsigned int *classes);
-
-extern struct device_attribute dev_attr_link_power_management_policy;
-extern struct device_attribute dev_attr_unload_heads;
-extern struct device_attribute dev_attr_em_message_type;
-extern struct device_attribute dev_attr_em_message;
-extern struct device_attribute dev_attr_sw_activity;
-
-enum sw_activity {
-	OFF,
-	BLINK_ON,
-	BLINK_OFF,
-};
-
-#ifdef CONFIG_ATA_SFF
-struct ata_ioports {
-	void __iomem		*cmd_addr;
-	void __iomem		*data_addr;
-	void __iomem		*error_addr;
-	void __iomem		*feature_addr;
-	void __iomem		*nsect_addr;
-	void __iomem		*lbal_addr;
-	void __iomem		*lbam_addr;
-	void __iomem		*lbah_addr;
-	void __iomem		*device_addr;
-	void __iomem		*status_addr;
-	void __iomem		*command_addr;
-	void __iomem		*altstatus_addr;
-	void __iomem		*ctl_addr;
-#ifdef CONFIG_ATA_BMDMA
-	void __iomem		*bmdma_addr;
-#endif /* CONFIG_ATA_BMDMA */
-	void __iomem		*scr_addr;
-};
-#endif /* CONFIG_ATA_SFF */
-
-struct ata_host {
-	spinlock_t		lock;
-	struct device 		*dev;
-	void __iomem * const	*iomap;
-	unsigned int		n_ports;
-	void			*private_data;
-	struct ata_port_operations *ops;
-	unsigned long		flags;
-
-	struct mutex		eh_mutex;
-	struct task_struct	*eh_owner;
-
-#ifdef CONFIG_ATA_ACPI
-	acpi_handle		acpi_handle;
-#endif
-	struct ata_port		*simplex_claimed;	/* channel owning the DMA */
-	struct ata_port		*ports[0];
-};
-
-struct ata_queued_cmd {
-	struct ata_port		*ap;
-	struct ata_device	*dev;
-
-	struct scsi_cmnd	*scsicmd;
-	void			(*scsidone)(struct scsi_cmnd *);
-
-	struct ata_taskfile	tf;
-	u8			cdb[ATAPI_CDB_LEN];
-
-	unsigned long		flags;		/* ATA_QCFLAG_xxx */
-	unsigned int		tag;
-	unsigned int		n_elem;
-	unsigned int		orig_n_elem;
-
-	int			dma_dir;
-
-	unsigned int		sect_size;
-
-	unsigned int		nbytes;
-	unsigned int		extrabytes;
-	unsigned int		curbytes;
-
-	struct scatterlist	sgent;
-
-	struct scatterlist	*sg;
-
-	struct scatterlist	*cursg;
-	unsigned int		cursg_ofs;
-
-	unsigned int		err_mask;
-	struct ata_taskfile	result_tf;
-	ata_qc_cb_t		complete_fn;
-
-	void			*private_data;
-	void			*lldd_task;
-};
-
-struct ata_port_stats {
-	unsigned long		unhandled_irq;
-	unsigned long		idle_irq;
-	unsigned long		rw_reqbuf;
-};
-
-struct ata_ering_entry {
-	unsigned int		eflags;
-	unsigned int		err_mask;
-	u64			timestamp;
-};
-
-struct ata_ering {
-	int			cursor;
-	struct ata_ering_entry	ring[ATA_ERING_SIZE];
-};
-
-struct ata_device {
-	struct ata_link		*link;
-	unsigned int		devno;		/* 0 or 1 */
-	unsigned int		horkage;	/* List of broken features */
-	unsigned long		flags;		/* ATA_DFLAG_xxx */
-	struct scsi_device	*sdev;		/* attached SCSI device */
-	void			*private_data;
-#ifdef CONFIG_ATA_ACPI
-	acpi_handle		acpi_handle;
-	union acpi_object	*gtf_cache;
-	unsigned int		gtf_filter;
-#endif
-	struct device		tdev;
-	/* n_sector is CLEAR_BEGIN, read comment above CLEAR_BEGIN */
-	u64			n_sectors;	/* size of device, if ATA */
-	u64			n_native_sectors; /* native size, if ATA */
-	unsigned int		class;		/* ATA_DEV_xxx */
-	unsigned long		unpark_deadline;
-
-	u8			pio_mode;
-	u8			dma_mode;
-	u8			xfer_mode;
-	unsigned int		xfer_shift;	/* ATA_SHIFT_xxx */
-
-	unsigned int		multi_count;	/* sectors count for
-						   READ/WRITE MULTIPLE */
-	unsigned int		max_sectors;	/* per-device max sectors */
-	unsigned int		cdb_len;
-
-	/* per-dev xfer mask */
-	unsigned long		pio_mask;
-	unsigned long		mwdma_mask;
-	unsigned long		udma_mask;
-
-	/* for CHS addressing */
-	u16			cylinders;	/* Number of cylinders */
-	u16			heads;		/* Number of heads */
-	u16			sectors;	/* Number of sectors per track */
-
-	union {
-		u16		id[ATA_ID_WORDS]; /* IDENTIFY xxx DEVICE data */
-		u32		gscr[SATA_PMP_GSCR_DWORDS]; /* PMP GSCR block */
-	};
-
-	/* error history */
-	int			spdn_cnt;
-	/* ering is CLEAR_END, read comment above CLEAR_END */
-	struct ata_ering	ering;
-};
-
-/* Fields between ATA_DEVICE_CLEAR_BEGIN and ATA_DEVICE_CLEAR_END are
- * cleared to zero on ata_dev_init().
- */
-#define ATA_DEVICE_CLEAR_BEGIN		offsetof(struct ata_device, n_sectors)
-#define ATA_DEVICE_CLEAR_END		offsetof(struct ata_device, ering)
-
-struct ata_eh_info {
-	struct ata_device	*dev;		/* offending device */
-	u32			serror;		/* SError from LLDD */
-	unsigned int		err_mask;	/* port-wide err_mask */
-	unsigned int		action;		/* ATA_EH_* action mask */
-	unsigned int		dev_action[ATA_MAX_DEVICES]; /* dev EH action */
-	unsigned int		flags;		/* ATA_EHI_* flags */
-
-	unsigned int		probe_mask;
-
-	char			desc[ATA_EH_DESC_LEN];
-	int			desc_len;
-};
-
-struct ata_eh_context {
-	struct ata_eh_info	i;
-	int			tries[ATA_MAX_DEVICES];
-	int			cmd_timeout_idx[ATA_MAX_DEVICES]
-					       [ATA_EH_CMD_TIMEOUT_TABLE_SIZE];
-	unsigned int		classes[ATA_MAX_DEVICES];
-	unsigned int		did_probe_mask;
-	unsigned int		unloaded_mask;
-	unsigned int		saved_ncq_enabled;
-	u8			saved_xfer_mode[ATA_MAX_DEVICES];
-	/* timestamp for the last reset attempt or success */
-	unsigned long		last_reset;
-};
-
-struct ata_acpi_drive
-{
-	u32 pio;
-	u32 dma;
-} __packed;
-
-struct ata_acpi_gtm {
-	struct ata_acpi_drive drive[2];
-	u32 flags;
-} __packed;
-
-struct ata_link {
-	struct ata_port		*ap;
-	int			pmp;		/* port multiplier port # */
-
-	struct device		tdev;
-	unsigned int		active_tag;	/* active tag on this link */
-	u32			sactive;	/* active NCQ commands */
-
-	unsigned int		flags;		/* ATA_LFLAG_xxx */
-
-	u32			saved_scontrol;	/* SControl on probe */
-	unsigned int		hw_sata_spd_limit;
-	unsigned int		sata_spd_limit;
-	unsigned int		sata_spd;	/* current SATA PHY speed */
-	enum ata_lpm_policy	lpm_policy;
-
-	/* record runtime error info, protected by host_set lock */
-	struct ata_eh_info	eh_info;
-	/* EH context */
-	struct ata_eh_context	eh_context;
-
-	struct ata_device	device[ATA_MAX_DEVICES];
-};
-#define ATA_LINK_CLEAR_BEGIN		offsetof(struct ata_link, active_tag)
-#define ATA_LINK_CLEAR_END		offsetof(struct ata_link, device[0])
-
-struct ata_port {
-	struct Scsi_Host	*scsi_host; /* our co-allocated scsi host */
-	struct ata_port_operations *ops;
-	spinlock_t		*lock;
-	/* Flags owned by the EH context. Only EH should touch these once the
-	   port is active */
-	unsigned long		flags;	/* ATA_FLAG_xxx */
-	/* Flags that change dynamically, protected by ap->lock */
-	unsigned int		pflags; /* ATA_PFLAG_xxx */
-	unsigned int		print_id; /* user visible unique port ID */
-	unsigned int		port_no; /* 0 based port no. inside the host */
-
-#ifdef CONFIG_ATA_SFF
-	struct ata_ioports	ioaddr;	/* ATA cmd/ctl/dma register blocks */
-	u8			ctl;	/* cache of ATA control register */
-	u8			last_ctl;	/* Cache last written value */
-	struct ata_link*	sff_pio_task_link; /* link currently used */
-	struct delayed_work	sff_pio_task;
-#ifdef CONFIG_ATA_BMDMA
-	struct ata_bmdma_prd	*bmdma_prd;	/* BMDMA SG list */
-	dma_addr_t		bmdma_prd_dma;	/* and its DMA mapping */
-#endif /* CONFIG_ATA_BMDMA */
-#endif /* CONFIG_ATA_SFF */
-
-	unsigned int		pio_mask;
-	unsigned int		mwdma_mask;
-	unsigned int		udma_mask;
-	unsigned int		cbl;	/* cable type; ATA_CBL_xxx */
-
-	struct ata_queued_cmd	qcmd[ATA_MAX_QUEUE];
-	unsigned long		qc_allocated;
-	unsigned int		qc_active;
-	int			nr_active_links; /* #links with active qcs */
-
-	struct ata_link		link;		/* host default link */
-	struct ata_link		*slave_link;	/* see ata_slave_link_init() */
-
-	int			nr_pmp_links;	/* nr of available PMP links */
-	struct ata_link		*pmp_link;	/* array of PMP links */
-	struct ata_link		*excl_link;	/* for PMP qc exclusion */
-
-	struct ata_port_stats	stats;
-	struct ata_host		*host;
-	struct device 		*dev;
-	struct device		tdev;
-
-	struct mutex		scsi_scan_mutex;
-	struct delayed_work	hotplug_task;
-	struct work_struct	scsi_rescan_task;
-
-	unsigned int		hsm_task_state;
-
-	u32			msg_enable;
-	struct list_head	eh_done_q;
-	wait_queue_head_t	eh_wait_q;
-	int			eh_tries;
-	struct completion	park_req_pending;
-
-	pm_message_t		pm_mesg;
-	int			*pm_result;
-	enum ata_lpm_policy	target_lpm_policy;
-
-	struct timer_list	fastdrain_timer;
-	unsigned long		fastdrain_cnt;
-
-	int			em_message_type;
-	void			*private_data;
-
-#ifdef CONFIG_ATA_ACPI
-	acpi_handle		acpi_handle;
-	struct ata_acpi_gtm	__acpi_init_gtm; /* use ata_acpi_init_gtm() */
-#endif
-	/* owned by EH */
-	u8			sector_buf[ATA_SECT_SIZE] ____cacheline_aligned;
-};
-
-/* The following initializer overrides a method to NULL whether one of
- * its parent has the method defined or not.  This is equivalent to
- * ERR_PTR(-ENOENT).  Unfortunately, ERR_PTR doesn't render a constant
- * expression and thus can't be used as an initializer.
- */
-#define ATA_OP_NULL		(void *)(unsigned long)(-ENOENT)
-
-struct ata_port_operations {
-	/*
-	 * Command execution
-	 */
-	int  (*qc_defer)(struct ata_queued_cmd *qc);
-	int  (*check_atapi_dma)(struct ata_queued_cmd *qc);
-	void (*qc_prep)(struct ata_queued_cmd *qc);
-	unsigned int (*qc_issue)(struct ata_queued_cmd *qc);
-	bool (*qc_fill_rtf)(struct ata_queued_cmd *qc);
-
-	/*
-	 * Configuration and exception handling
-	 */
-	int  (*cable_detect)(struct ata_port *ap);
-	unsigned long (*mode_filter)(struct ata_device *dev, unsigned long xfer_mask);
-	void (*set_piomode)(struct ata_port *ap, struct ata_device *dev);
-	void (*set_dmamode)(struct ata_port *ap, struct ata_device *dev);
-	int  (*set_mode)(struct ata_link *link, struct ata_device **r_failed_dev);
-	unsigned int (*read_id)(struct ata_device *dev, struct ata_taskfile *tf, u16 *id);
-
-	void (*dev_config)(struct ata_device *dev);
-
-	void (*freeze)(struct ata_port *ap);
-	void (*thaw)(struct ata_port *ap);
-	ata_prereset_fn_t	prereset;
-	ata_reset_fn_t		softreset;
-	ata_reset_fn_t		hardreset;
-	ata_postreset_fn_t	postreset;
-	ata_prereset_fn_t	pmp_prereset;
-	ata_reset_fn_t		pmp_softreset;
-	ata_reset_fn_t		pmp_hardreset;
-	ata_postreset_fn_t	pmp_postreset;
-	void (*error_handler)(struct ata_port *ap);
-	void (*lost_interrupt)(struct ata_port *ap);
-	void (*post_internal_cmd)(struct ata_queued_cmd *qc);
-
-	/*
-	 * Optional features
-	 */
-	int  (*scr_read)(struct ata_link *link, unsigned int sc_reg, u32 *val);
-	int  (*scr_write)(struct ata_link *link, unsigned int sc_reg, u32 val);
-	void (*pmp_attach)(struct ata_port *ap);
-	void (*pmp_detach)(struct ata_port *ap);
-	int  (*set_lpm)(struct ata_link *link, enum ata_lpm_policy policy,
-			unsigned hints);
-
-	/*
-	 * Start, stop, suspend and resume
-	 */
-	int  (*port_suspend)(struct ata_port *ap, pm_message_t mesg);
-	int  (*port_resume)(struct ata_port *ap);
-	int  (*port_start)(struct ata_port *ap);
-	void (*port_stop)(struct ata_port *ap);
-	void (*host_stop)(struct ata_host *host);
-
-#ifdef CONFIG_ATA_SFF
-	/*
-	 * SFF / taskfile oriented ops
-	 */
-	void (*sff_dev_select)(struct ata_port *ap, unsigned int device);
-	void (*sff_set_devctl)(struct ata_port *ap, u8 ctl);
-	u8   (*sff_check_status)(struct ata_port *ap);
-	u8   (*sff_check_altstatus)(struct ata_port *ap);
-	void (*sff_tf_load)(struct ata_port *ap, const struct ata_taskfile *tf);
-	void (*sff_tf_read)(struct ata_port *ap, struct ata_taskfile *tf);
-	void (*sff_exec_command)(struct ata_port *ap,
-				 const struct ata_taskfile *tf);
-	unsigned int (*sff_data_xfer)(struct ata_device *dev,
-			unsigned char *buf, unsigned int buflen, int rw);
-	void (*sff_irq_on)(struct ata_port *);
-	bool (*sff_irq_check)(struct ata_port *);
-	void (*sff_irq_clear)(struct ata_port *);
-	void (*sff_drain_fifo)(struct ata_queued_cmd *qc);
-
-#ifdef CONFIG_ATA_BMDMA
-	void (*bmdma_setup)(struct ata_queued_cmd *qc);
-	void (*bmdma_start)(struct ata_queued_cmd *qc);
-	void (*bmdma_stop)(struct ata_queued_cmd *qc);
-	u8   (*bmdma_status)(struct ata_port *ap);
-#endif /* CONFIG_ATA_BMDMA */
-#endif /* CONFIG_ATA_SFF */
-
-	ssize_t (*em_show)(struct ata_port *ap, char *buf);
-	ssize_t (*em_store)(struct ata_port *ap, const char *message,
-			    size_t size);
-	ssize_t (*sw_activity_show)(struct ata_device *dev, char *buf);
-	ssize_t (*sw_activity_store)(struct ata_device *dev,
-				     enum sw_activity val);
-	/*
-	 * Obsolete
-	 */
-	void (*phy_reset)(struct ata_port *ap);
-	void (*eng_timeout)(struct ata_port *ap);
-
-	/*
-	 * ->inherits must be the last field and all the preceding
-	 * fields must be pointers.
-	 */
-	const struct ata_port_operations	*inherits;
-};
-
-struct ata_port_info {
-	unsigned long		flags;
-	unsigned long		link_flags;
-	unsigned long		pio_mask;
-	unsigned long		mwdma_mask;
-	unsigned long		udma_mask;
-	struct ata_port_operations *port_ops;
-	void 			*private_data;
-};
-
-struct ata_timing {
-	unsigned short mode;		/* ATA mode */
-	unsigned short setup;		/* t1 */
-	unsigned short act8b;		/* t2 for 8-bit I/O */
-	unsigned short rec8b;		/* t2i for 8-bit I/O */
-	unsigned short cyc8b;		/* t0 for 8-bit I/O */
-	unsigned short active;		/* t2 or tD */
-	unsigned short recover;		/* t2i or tK */
-	unsigned short dmack_hold;	/* tj */
-	unsigned short cycle;		/* t0 */
-	unsigned short udma;		/* t2CYCTYP/2 */
-};
-
-/*
- * Core layer - drivers/ata/libata-core.c
- */
-extern const unsigned long sata_deb_timing_normal[];
-extern const unsigned long sata_deb_timing_hotplug[];
-extern const unsigned long sata_deb_timing_long[];
-
-extern struct ata_port_operations ata_dummy_port_ops;
-extern const struct ata_port_info ata_dummy_port_info;
-
-static inline const unsigned long *
-sata_ehc_deb_timing(struct ata_eh_context *ehc)
-{
-	if (ehc->i.flags & ATA_EHI_HOTPLUGGED)
-		return sata_deb_timing_hotplug;
-	else
-		return sata_deb_timing_normal;
-}
-
-static inline int ata_port_is_dummy(struct ata_port *ap)
-{
-	return ap->ops == &ata_dummy_port_ops;
-}
-
-extern int sata_set_spd(struct ata_link *link);
-extern int ata_std_prereset(struct ata_link *link, unsigned long deadline);
-extern int ata_wait_after_reset(struct ata_link *link, unsigned long deadline,
-				int (*check_ready)(struct ata_link *link));
-extern int sata_link_debounce(struct ata_link *link,
-			const unsigned long *params, unsigned long deadline);
-extern int sata_link_resume(struct ata_link *link, const unsigned long *params,
-			    unsigned long deadline);
-extern int sata_link_scr_lpm(struct ata_link *link, enum ata_lpm_policy policy,
-			     bool spm_wakeup);
-extern int sata_link_hardreset(struct ata_link *link,
-			const unsigned long *timing, unsigned long deadline,
-			bool *online, int (*check_ready)(struct ata_link *));
-extern int sata_std_hardreset(struct ata_link *link, unsigned int *class,
-			      unsigned long deadline);
-extern void ata_std_postreset(struct ata_link *link, unsigned int *classes);
-
-extern struct ata_host *ata_host_alloc(struct device *dev, int max_ports);
-extern struct ata_host *ata_host_alloc_pinfo(struct device *dev,
-			const struct ata_port_info * const * ppi, int n_ports);
-extern int ata_slave_link_init(struct ata_port *ap);
-extern int ata_host_start(struct ata_host *host);
-extern int ata_host_register(struct ata_host *host,
-			     struct scsi_host_template *sht);
-extern int ata_host_activate(struct ata_host *host, int irq,
-			     irq_handler_t irq_handler, unsigned long irq_flags,
-			     struct scsi_host_template *sht);
-extern void ata_host_detach(struct ata_host *host);
-extern void ata_host_init(struct ata_host *, struct device *,
-			  unsigned long, struct ata_port_operations *);
-extern int ata_scsi_detect(struct scsi_host_template *sht);
-extern int ata_scsi_ioctl(struct scsi_device *dev, int cmd, void __user *arg);
-extern int ata_scsi_queuecmd(struct Scsi_Host *h, struct scsi_cmnd *cmd);
-extern int ata_sas_scsi_ioctl(struct ata_port *ap, struct scsi_device *dev,
-			    int cmd, void __user *arg);
-extern void ata_sas_port_destroy(struct ata_port *);
-extern struct ata_port *ata_sas_port_alloc(struct ata_host *,
-					   struct ata_port_info *, struct Scsi_Host *);
-extern void ata_sas_async_probe(struct ata_port *ap);
-extern int ata_sas_sync_probe(struct ata_port *ap);
-extern int ata_sas_port_init(struct ata_port *);
-extern int ata_sas_port_start(struct ata_port *ap);
-extern void ata_sas_port_stop(struct ata_port *ap);
-extern int ata_sas_slave_configure(struct scsi_device *, struct ata_port *);
-extern int ata_sas_queuecmd(struct scsi_cmnd *cmd, struct ata_port *ap);
-extern int sata_scr_valid(struct ata_link *link);
-extern int sata_scr_read(struct ata_link *link, int reg, u32 *val);
-extern int sata_scr_write(struct ata_link *link, int reg, u32 val);
-extern int sata_scr_write_flush(struct ata_link *link, int reg, u32 val);
-extern bool ata_link_online(struct ata_link *link);
-extern bool ata_link_offline(struct ata_link *link);
-#ifdef CONFIG_PM
-extern int ata_host_suspend(struct ata_host *host, pm_message_t mesg);
-extern void ata_host_resume(struct ata_host *host);
-#endif
-extern int ata_ratelimit(void);
-extern void ata_msleep(struct ata_port *ap, unsigned int msecs);
-extern u32 ata_wait_register(struct ata_port *ap, void __iomem *reg, u32 mask,
-			u32 val, unsigned long interval, unsigned long timeout);
-extern int atapi_cmd_type(u8 opcode);
-extern void ata_tf_to_fis(const struct ata_taskfile *tf,
-			  u8 pmp, int is_cmd, u8 *fis);
-extern void ata_tf_from_fis(const u8 *fis, struct ata_taskfile *tf);
-extern unsigned long ata_pack_xfermask(unsigned long pio_mask,
-			unsigned long mwdma_mask, unsigned long udma_mask);
-extern void ata_unpack_xfermask(unsigned long xfer_mask,
-			unsigned long *pio_mask, unsigned long *mwdma_mask,
-			unsigned long *udma_mask);
-extern u8 ata_xfer_mask2mode(unsigned long xfer_mask);
-extern unsigned long ata_xfer_mode2mask(u8 xfer_mode);
-extern int ata_xfer_mode2shift(unsigned long xfer_mode);
-extern const char *ata_mode_string(unsigned long xfer_mask);
-extern unsigned long ata_id_xfermask(const u16 *id);
-extern int ata_std_qc_defer(struct ata_queued_cmd *qc);
-extern void ata_noop_qc_prep(struct ata_queued_cmd *qc);
-extern void ata_sg_init(struct ata_queued_cmd *qc, struct scatterlist *sg,
-		 unsigned int n_elem);
-extern unsigned int ata_dev_classify(const struct ata_taskfile *tf);
-extern void ata_dev_disable(struct ata_device *adev);
-extern void ata_id_string(const u16 *id, unsigned char *s,
-			  unsigned int ofs, unsigned int len);
-extern void ata_id_c_string(const u16 *id, unsigned char *s,
-			    unsigned int ofs, unsigned int len);
-extern unsigned int ata_do_dev_read_id(struct ata_device *dev,
-					struct ata_taskfile *tf, u16 *id);
-extern void ata_qc_complete(struct ata_queued_cmd *qc);
-extern int ata_qc_complete_multiple(struct ata_port *ap, u32 qc_active);
-extern void ata_scsi_simulate(struct ata_device *dev, struct scsi_cmnd *cmd);
-extern int ata_std_bios_param(struct scsi_device *sdev,
-			      struct block_device *bdev,
-			      sector_t capacity, int geom[]);
-extern void ata_scsi_unlock_native_capacity(struct scsi_device *sdev);
-extern int ata_scsi_slave_config(struct scsi_device *sdev);
-extern void ata_scsi_slave_destroy(struct scsi_device *sdev);
-extern int ata_scsi_change_queue_depth(struct scsi_device *sdev,
-				       int queue_depth, int reason);
-extern int __ata_change_queue_depth(struct ata_port *ap, struct scsi_device *sdev,
-				    int queue_depth, int reason);
-extern struct ata_device *ata_dev_pair(struct ata_device *adev);
-extern int ata_do_set_mode(struct ata_link *link, struct ata_device **r_failed_dev);
-extern void ata_scsi_port_error_handler(struct Scsi_Host *host, struct ata_port *ap);
-extern void ata_scsi_cmd_error_handler(struct Scsi_Host *host, struct ata_port *ap, struct list_head *eh_q);
-
-extern int ata_cable_40wire(struct ata_port *ap);
-extern int ata_cable_80wire(struct ata_port *ap);
-extern int ata_cable_sata(struct ata_port *ap);
-extern int ata_cable_ignore(struct ata_port *ap);
-extern int ata_cable_unknown(struct ata_port *ap);
-
-/* Timing helpers */
-extern unsigned int ata_pio_need_iordy(const struct ata_device *);
-extern const struct ata_timing *ata_timing_find_mode(u8 xfer_mode);
-extern int ata_timing_compute(struct ata_device *, unsigned short,
-			      struct ata_timing *, int, int);
-extern void ata_timing_merge(const struct ata_timing *,
-			     const struct ata_timing *, struct ata_timing *,
-			     unsigned int);
-extern u8 ata_timing_cycle2mode(unsigned int xfer_shift, int cycle);
-
-/* PCI */
-#ifdef CONFIG_PCI
-struct pci_dev;
-
-struct pci_bits {
-	unsigned int		reg;	/* PCI config register to read */
-	unsigned int		width;	/* 1 (8 bit), 2 (16 bit), 4 (32 bit) */
-	unsigned long		mask;
-	unsigned long		val;
-};
-
-extern int pci_test_config_bits(struct pci_dev *pdev, const struct pci_bits *bits);
-extern void ata_pci_remove_one(struct pci_dev *pdev);
-
-#ifdef CONFIG_PM
-extern void ata_pci_device_do_suspend(struct pci_dev *pdev, pm_message_t mesg);
-extern int __must_check ata_pci_device_do_resume(struct pci_dev *pdev);
-extern int ata_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg);
-extern int ata_pci_device_resume(struct pci_dev *pdev);
-#endif /* CONFIG_PM */
-#endif /* CONFIG_PCI */
-
-/*
- * ACPI - drivers/ata/libata-acpi.c
- */
-#ifdef CONFIG_ATA_ACPI
-static inline const struct ata_acpi_gtm *ata_acpi_init_gtm(struct ata_port *ap)
-{
-	if (ap->pflags & ATA_PFLAG_INIT_GTM_VALID)
-		return &ap->__acpi_init_gtm;
-	return NULL;
-}
-int ata_acpi_stm(struct ata_port *ap, const struct ata_acpi_gtm *stm);
-int ata_acpi_gtm(struct ata_port *ap, struct ata_acpi_gtm *stm);
-unsigned long ata_acpi_gtm_xfermask(struct ata_device *dev,
-				    const struct ata_acpi_gtm *gtm);
-int ata_acpi_cbl_80wire(struct ata_port *ap, const struct ata_acpi_gtm *gtm);
-#else
-static inline const struct ata_acpi_gtm *ata_acpi_init_gtm(struct ata_port *ap)
-{
-	return NULL;
-}
-
-static inline int ata_acpi_stm(const struct ata_port *ap,
-			       struct ata_acpi_gtm *stm)
-{
-	return -ENOSYS;
-}
-
-static inline int ata_acpi_gtm(const struct ata_port *ap,
-			       struct ata_acpi_gtm *stm)
-{
-	return -ENOSYS;
-}
-
-static inline unsigned int ata_acpi_gtm_xfermask(struct ata_device *dev,
-					const struct ata_acpi_gtm *gtm)
-{
-	return 0;
-}
-
-static inline int ata_acpi_cbl_80wire(struct ata_port *ap,
-				      const struct ata_acpi_gtm *gtm)
-{
-	return 0;
-}
-#endif
-
-/*
- * EH - drivers/ata/libata-eh.c
- */
-extern void ata_port_schedule_eh(struct ata_port *ap);
-extern void ata_port_wait_eh(struct ata_port *ap);
-extern int ata_link_abort(struct ata_link *link);
-extern int ata_port_abort(struct ata_port *ap);
-extern int ata_port_freeze(struct ata_port *ap);
-extern int sata_async_notification(struct ata_port *ap);
-
-extern void ata_eh_freeze_port(struct ata_port *ap);
-extern void ata_eh_thaw_port(struct ata_port *ap);
-
-extern void ata_eh_qc_complete(struct ata_queued_cmd *qc);
-extern void ata_eh_qc_retry(struct ata_queued_cmd *qc);
-extern void ata_eh_analyze_ncq_error(struct ata_link *link);
-
-extern void ata_do_eh(struct ata_port *ap, ata_prereset_fn_t prereset,
-		      ata_reset_fn_t softreset, ata_reset_fn_t hardreset,
-		      ata_postreset_fn_t postreset);
-extern void ata_std_error_handler(struct ata_port *ap);
-extern int ata_link_nr_enabled(struct ata_link *link);
-
-/*
- * Base operations to inherit from and initializers for sht
- *
- * Operations
- *
- * base  : Common to all libata drivers.
- * sata  : SATA controllers w/ native interface.
- * pmp   : SATA controllers w/ PMP support.
- * sff   : SFF ATA controllers w/o BMDMA support.
- * bmdma : SFF ATA controllers w/ BMDMA support.
- *
- * sht initializers
- *
- * BASE  : Common to all libata drivers.  The user must set
- *	   sg_tablesize and dma_boundary.
- * PIO   : SFF ATA controllers w/ only PIO support.
- * BMDMA : SFF ATA controllers w/ BMDMA support.  sg_tablesize and
- *	   dma_boundary are set to BMDMA limits.
- * NCQ   : SATA controllers supporting NCQ.  The user must set
- *	   sg_tablesize, dma_boundary and can_queue.
- */
-extern const struct ata_port_operations ata_base_port_ops;
-extern const struct ata_port_operations sata_port_ops;
-extern struct device_attribute *ata_common_sdev_attrs[];
-
-#define ATA_BASE_SHT(drv_name)					\
-	.module			= THIS_MODULE,			\
-	.name			= drv_name,			\
-	.ioctl			= ata_scsi_ioctl,		\
-	.queuecommand		= ata_scsi_queuecmd,		\
-	.can_queue		= ATA_DEF_QUEUE,		\
-	.this_id		= ATA_SHT_THIS_ID,		\
-	.cmd_per_lun		= ATA_SHT_CMD_PER_LUN,		\
-	.emulated		= ATA_SHT_EMULATED,		\
-	.use_clustering		= ATA_SHT_USE_CLUSTERING,	\
-	.proc_name		= drv_name,			\
-	.slave_configure	= ata_scsi_slave_config,	\
-	.slave_destroy		= ata_scsi_slave_destroy,	\
-	.bios_param		= ata_std_bios_param,		\
-	.unlock_native_capacity	= ata_scsi_unlock_native_capacity, \
-	.sdev_attrs		= ata_common_sdev_attrs
-
-#define ATA_NCQ_SHT(drv_name)					\
-	ATA_BASE_SHT(drv_name),					\
-	.change_queue_depth	= ata_scsi_change_queue_depth
-
-/*
- * PMP helpers
- */
-#ifdef CONFIG_SATA_PMP
-static inline bool sata_pmp_supported(struct ata_port *ap)
-{
-	return ap->flags & ATA_FLAG_PMP;
-}
-
-static inline bool sata_pmp_attached(struct ata_port *ap)
-{
-	return ap->nr_pmp_links != 0;
-}
-
-static inline int ata_is_host_link(const struct ata_link *link)
-{
-	return link == &link->ap->link || link == link->ap->slave_link;
-}
-#else /* CONFIG_SATA_PMP */
-static inline bool sata_pmp_supported(struct ata_port *ap)
-{
-	return false;
-}
-
-static inline bool sata_pmp_attached(struct ata_port *ap)
-{
-	return false;
-}
-
-static inline int ata_is_host_link(const struct ata_link *link)
-{
-	return 1;
-}
-#endif /* CONFIG_SATA_PMP */
-
-static inline int sata_srst_pmp(struct ata_link *link)
-{
-	if (sata_pmp_supported(link->ap) && ata_is_host_link(link))
-		return SATA_PMP_CTRL_PORT;
-	return link->pmp;
-}
-
-/*
- * printk helpers
- */
-__printf(3, 4)
-int ata_port_printk(const struct ata_port *ap, const char *level,
-		    const char *fmt, ...);
-__printf(3, 4)
-int ata_link_printk(const struct ata_link *link, const char *level,
-		    const char *fmt, ...);
-__printf(3, 4)
-int ata_dev_printk(const struct ata_device *dev, const char *level,
-		   const char *fmt, ...);
-
-#define ata_port_err(ap, fmt, ...)				\
-	ata_port_printk(ap, KERN_ERR, fmt, ##__VA_ARGS__)
-#define ata_port_warn(ap, fmt, ...)				\
-	ata_port_printk(ap, KERN_WARNING, fmt, ##__VA_ARGS__)
-#define ata_port_notice(ap, fmt, ...)				\
-	ata_port_printk(ap, KERN_NOTICE, fmt, ##__VA_ARGS__)
-#define ata_port_info(ap, fmt, ...)				\
-	ata_port_printk(ap, KERN_INFO, fmt, ##__VA_ARGS__)
-#define ata_port_dbg(ap, fmt, ...)				\
-	ata_port_printk(ap, KERN_DEBUG, fmt, ##__VA_ARGS__)
-
-#define ata_link_err(link, fmt, ...)				\
-	ata_link_printk(link, KERN_ERR, fmt, ##__VA_ARGS__)
-#define ata_link_warn(link, fmt, ...)				\
-	ata_link_printk(link, KERN_WARNING, fmt, ##__VA_ARGS__)
-#define ata_link_notice(link, fmt, ...)				\
-	ata_link_printk(link, KERN_NOTICE, fmt, ##__VA_ARGS__)
-#define ata_link_info(link, fmt, ...)				\
-	ata_link_printk(link, KERN_INFO, fmt, ##__VA_ARGS__)
-#define ata_link_dbg(link, fmt, ...)				\
-	ata_link_printk(link, KERN_DEBUG, fmt, ##__VA_ARGS__)
-
-#define ata_dev_err(dev, fmt, ...)				\
-	ata_dev_printk(dev, KERN_ERR, fmt, ##__VA_ARGS__)
-#define ata_dev_warn(dev, fmt, ...)				\
-	ata_dev_printk(dev, KERN_WARNING, fmt, ##__VA_ARGS__)
-#define ata_dev_notice(dev, fmt, ...)				\
-	ata_dev_printk(dev, KERN_NOTICE, fmt, ##__VA_ARGS__)
-#define ata_dev_info(dev, fmt, ...)				\
-	ata_dev_printk(dev, KERN_INFO, fmt, ##__VA_ARGS__)
-#define ata_dev_dbg(dev, fmt, ...)				\
-	ata_dev_printk(dev, KERN_DEBUG, fmt, ##__VA_ARGS__)
-
-void ata_print_version(const struct device *dev, const char *version);
-
-/*
- * ata_eh_info helpers
- */
-extern __printf(2, 3)
-void __ata_ehi_push_desc(struct ata_eh_info *ehi, const char *fmt, ...);
-extern __printf(2, 3)
-void ata_ehi_push_desc(struct ata_eh_info *ehi, const char *fmt, ...);
-extern void ata_ehi_clear_desc(struct ata_eh_info *ehi);
-
-static inline void ata_ehi_hotplugged(struct ata_eh_info *ehi)
-{
-	ehi->probe_mask |= (1 << ATA_MAX_DEVICES) - 1;
-	ehi->flags |= ATA_EHI_HOTPLUGGED;
-	ehi->action |= ATA_EH_RESET | ATA_EH_ENABLE_LINK;
-	ehi->err_mask |= AC_ERR_ATA_BUS;
-}
-
-/*
- * port description helpers
- */
-extern __printf(2, 3)
-void ata_port_desc(struct ata_port *ap, const char *fmt, ...);
-#ifdef CONFIG_PCI
-extern void ata_port_pbar_desc(struct ata_port *ap, int bar, ssize_t offset,
-			       const char *name);
-#endif
-
-static inline unsigned int ata_tag_valid(unsigned int tag)
-{
-	return (tag < ATA_MAX_QUEUE) ? 1 : 0;
-}
-
-static inline unsigned int ata_tag_internal(unsigned int tag)
-{
-	return tag == ATA_TAG_INTERNAL;
-}
-
-/*
- * device helpers
- */
-static inline unsigned int ata_class_enabled(unsigned int class)
-{
-	return class == ATA_DEV_ATA || class == ATA_DEV_ATAPI ||
-		class == ATA_DEV_PMP || class == ATA_DEV_SEMB;
-}
-
-static inline unsigned int ata_class_disabled(unsigned int class)
-{
-	return class == ATA_DEV_ATA_UNSUP || class == ATA_DEV_ATAPI_UNSUP ||
-		class == ATA_DEV_PMP_UNSUP || class == ATA_DEV_SEMB_UNSUP;
-}
-
-static inline unsigned int ata_class_absent(unsigned int class)
-{
-	return !ata_class_enabled(class) && !ata_class_disabled(class);
-}
-
-static inline unsigned int ata_dev_enabled(const struct ata_device *dev)
-{
-	return ata_class_enabled(dev->class);
-}
-
-static inline unsigned int ata_dev_disabled(const struct ata_device *dev)
-{
-	return ata_class_disabled(dev->class);
-}
-
-static inline unsigned int ata_dev_absent(const struct ata_device *dev)
-{
-	return ata_class_absent(dev->class);
-}
-
-/*
- * link helpers
- */
-static inline int ata_link_max_devices(const struct ata_link *link)
-{
-	if (ata_is_host_link(link) && link->ap->flags & ATA_FLAG_SLAVE_POSS)
-		return 2;
-	return 1;
-}
-
-static inline int ata_link_active(struct ata_link *link)
-{
-	return ata_tag_valid(link->active_tag) || link->sactive;
-}
-
-/*
- * Iterators
- *
- * ATA_LITER_* constants are used to select link iteration mode and
- * ATA_DITER_* device iteration mode.
- *
- * For a custom iteration directly using ata_{link|dev}_next(), if
- * @link or @dev, respectively, is NULL, the first element is
- * returned.  @dev and @link can be any valid device or link and the
- * next element according to the iteration mode will be returned.
- * After the last element, NULL is returned.
- */
-enum ata_link_iter_mode {
-	ATA_LITER_EDGE,		/* if present, PMP links only; otherwise,
-				 * host link.  no slave link */
-	ATA_LITER_HOST_FIRST,	/* host link followed by PMP or slave links */
-	ATA_LITER_PMP_FIRST,	/* PMP links followed by host link,
-				 * slave link still comes after host link */
-};
-
-enum ata_dev_iter_mode {
-	ATA_DITER_ENABLED,
-	ATA_DITER_ENABLED_REVERSE,
-	ATA_DITER_ALL,
-	ATA_DITER_ALL_REVERSE,
-};
-
-extern struct ata_link *ata_link_next(struct ata_link *link,
-				      struct ata_port *ap,
-				      enum ata_link_iter_mode mode);
-
-extern struct ata_device *ata_dev_next(struct ata_device *dev,
-				       struct ata_link *link,
-				       enum ata_dev_iter_mode mode);
-
-/*
- * Shortcut notation for iterations
- *
- * ata_for_each_link() iterates over each link of @ap according to
- * @mode.  @link points to the current link in the loop.  @link is
- * NULL after loop termination.  ata_for_each_dev() works the same way
- * except that it iterates over each device of @link.
- *
- * Note that the mode prefixes ATA_{L|D}ITER_ shouldn't need to be
- * specified when using the following shorthand notations.  Only the
- * mode itself (EDGE, HOST_FIRST, ENABLED, etc...) should be
- * specified.  This not only increases brevity but also makes it
- * impossible to use ATA_LITER_* for device iteration or vice-versa.
- */
-#define ata_for_each_link(link, ap, mode) \
-	for ((link) = ata_link_next(NULL, (ap), ATA_LITER_##mode); (link); \
-	     (link) = ata_link_next((link), (ap), ATA_LITER_##mode))
-
-#define ata_for_each_dev(dev, link, mode) \
-	for ((dev) = ata_dev_next(NULL, (link), ATA_DITER_##mode); (dev); \
-	     (dev) = ata_dev_next((dev), (link), ATA_DITER_##mode))
-
-/**
- *	ata_ncq_enabled - Test whether NCQ is enabled
- *	@dev: ATA device to test for
- *
- *	LOCKING:
- *	spin_lock_irqsave(host lock)
- *
- *	RETURNS:
- *	1 if NCQ is enabled for @dev, 0 otherwise.
- */
-static inline int ata_ncq_enabled(struct ata_device *dev)
-{
-	return (dev->flags & (ATA_DFLAG_PIO | ATA_DFLAG_NCQ_OFF |
-			      ATA_DFLAG_NCQ)) == ATA_DFLAG_NCQ;
-}
-
-static inline void ata_qc_set_polling(struct ata_queued_cmd *qc)
-{
-	qc->tf.ctl |= ATA_NIEN;
-}
-
-static inline struct ata_queued_cmd *__ata_qc_from_tag(struct ata_port *ap,
-						       unsigned int tag)
-{
-	if (likely(ata_tag_valid(tag)))
-		return &ap->qcmd[tag];
-	return NULL;
-}
-
-static inline struct ata_queued_cmd *ata_qc_from_tag(struct ata_port *ap,
-						     unsigned int tag)
-{
-	struct ata_queued_cmd *qc = __ata_qc_from_tag(ap, tag);
-
-	if (unlikely(!qc) || !ap->ops->error_handler)
-		return qc;
-
-	if ((qc->flags & (ATA_QCFLAG_ACTIVE |
-			  ATA_QCFLAG_FAILED)) == ATA_QCFLAG_ACTIVE)
-		return qc;
-
-	return NULL;
-}
-
-static inline unsigned int ata_qc_raw_nbytes(struct ata_queued_cmd *qc)
-{
-	return qc->nbytes - min(qc->extrabytes, qc->nbytes);
-}
-
-static inline void ata_tf_init(struct ata_device *dev, struct ata_taskfile *tf)
-{
-	memset(tf, 0, sizeof(*tf));
-
-#ifdef CONFIG_ATA_SFF
-	tf->ctl = dev->link->ap->ctl;
-#else
-	tf->ctl = ATA_DEVCTL_OBS;
-#endif
-	if (dev->devno == 0)
-		tf->device = ATA_DEVICE_OBS;
-	else
-		tf->device = ATA_DEVICE_OBS | ATA_DEV1;
-}
-
-static inline void ata_qc_reinit(struct ata_queued_cmd *qc)
-{
-	qc->dma_dir = DMA_NONE;
-	qc->sg = NULL;
-	qc->flags = 0;
-	qc->cursg = NULL;
-	qc->cursg_ofs = 0;
-	qc->nbytes = qc->extrabytes = qc->curbytes = 0;
-	qc->n_elem = 0;
-	qc->err_mask = 0;
-	qc->sect_size = ATA_SECT_SIZE;
-
-	ata_tf_init(qc->dev, &qc->tf);
-
-	/* init result_tf such that it indicates normal completion */
-	qc->result_tf.command = ATA_DRDY;
-	qc->result_tf.feature = 0;
-}
-
-static inline int ata_try_flush_cache(const struct ata_device *dev)
-{
-	return ata_id_wcache_enabled(dev->id) ||
-	       ata_id_has_flush(dev->id) ||
-	       ata_id_has_flush_ext(dev->id);
-}
-
-static inline unsigned int ac_err_mask(u8 status)
-{
-	if (status & (ATA_BUSY | ATA_DRQ))
-		return AC_ERR_HSM;
-	if (status & (ATA_ERR | ATA_DF))
-		return AC_ERR_DEV;
-	return 0;
-}
-
-static inline unsigned int __ac_err_mask(u8 status)
-{
-	unsigned int mask = ac_err_mask(status);
-	if (mask == 0)
-		return AC_ERR_OTHER;
-	return mask;
-}
-
-static inline struct ata_port *ata_shost_to_port(struct Scsi_Host *host)
-{
-	return *(struct ata_port **)&host->hostdata[0];
-}
-
-static inline int ata_check_ready(u8 status)
-{
-	if (!(status & ATA_BUSY))
-		return 1;
-
-	/* 0xff indicates either no device or device not ready */
-	if (status == 0xff)
-		return -ENODEV;
-
-	return 0;
-}
-
-static inline unsigned long ata_deadline(unsigned long from_jiffies,
-					 unsigned long timeout_msecs)
-{
-	return from_jiffies + msecs_to_jiffies(timeout_msecs);
-}
-
-/* Don't open code these in drivers as there are traps. Firstly the range may
-   change in future hardware and specs, secondly 0xFF means 'no DMA' but is
-   > UDMA_0. Dyma ddreigiau */
-
-static inline int ata_using_mwdma(struct ata_device *adev)
-{
-	if (adev->dma_mode >= XFER_MW_DMA_0 && adev->dma_mode <= XFER_MW_DMA_4)
-		return 1;
-	return 0;
-}
-
-static inline int ata_using_udma(struct ata_device *adev)
-{
-	if (adev->dma_mode >= XFER_UDMA_0 && adev->dma_mode <= XFER_UDMA_7)
-		return 1;
-	return 0;
-}
-
-static inline int ata_dma_enabled(struct ata_device *adev)
-{
-	return (adev->dma_mode == 0xFF ? 0 : 1);
-}
-
-/**************************************************************************
- * PMP - drivers/ata/libata-pmp.c
- */
-#ifdef CONFIG_SATA_PMP
-
-extern const struct ata_port_operations sata_pmp_port_ops;
-
-extern int sata_pmp_qc_defer_cmd_switch(struct ata_queued_cmd *qc);
-extern void sata_pmp_error_handler(struct ata_port *ap);
-
-#else /* CONFIG_SATA_PMP */
-
-#define sata_pmp_port_ops		sata_port_ops
-#define sata_pmp_qc_defer_cmd_switch	ata_std_qc_defer
-#define sata_pmp_error_handler		ata_std_error_handler
-
-#endif /* CONFIG_SATA_PMP */
-
-
-/**************************************************************************
- * SFF - drivers/ata/libata-sff.c
- */
-#ifdef CONFIG_ATA_SFF
-
-extern const struct ata_port_operations ata_sff_port_ops;
-extern const struct ata_port_operations ata_bmdma32_port_ops;
-
-/* PIO only, sg_tablesize and dma_boundary limits can be removed */
-#define ATA_PIO_SHT(drv_name)					\
-	ATA_BASE_SHT(drv_name),					\
-	.sg_tablesize		= LIBATA_MAX_PRD,		\
-	.dma_boundary		= ATA_DMA_BOUNDARY
-
-extern void ata_sff_dev_select(struct ata_port *ap, unsigned int device);
-extern u8 ata_sff_check_status(struct ata_port *ap);
-extern void ata_sff_pause(struct ata_port *ap);
-extern void ata_sff_dma_pause(struct ata_port *ap);
-extern int ata_sff_busy_sleep(struct ata_port *ap,
-			      unsigned long timeout_pat, unsigned long timeout);
-extern int ata_sff_wait_ready(struct ata_link *link, unsigned long deadline);
-extern void ata_sff_tf_load(struct ata_port *ap, const struct ata_taskfile *tf);
-extern void ata_sff_tf_read(struct ata_port *ap, struct ata_taskfile *tf);
-extern void ata_sff_exec_command(struct ata_port *ap,
-				 const struct ata_taskfile *tf);
-extern unsigned int ata_sff_data_xfer(struct ata_device *dev,
-			unsigned char *buf, unsigned int buflen, int rw);
-extern unsigned int ata_sff_data_xfer32(struct ata_device *dev,
-			unsigned char *buf, unsigned int buflen, int rw);
-extern unsigned int ata_sff_data_xfer_noirq(struct ata_device *dev,
-			unsigned char *buf, unsigned int buflen, int rw);
-extern void ata_sff_irq_on(struct ata_port *ap);
-extern void ata_sff_irq_clear(struct ata_port *ap);
-extern int ata_sff_hsm_move(struct ata_port *ap, struct ata_queued_cmd *qc,
-			    u8 status, int in_wq);
-extern void ata_sff_queue_work(struct work_struct *work);
-extern void ata_sff_queue_delayed_work(struct delayed_work *dwork,
-		unsigned long delay);
-extern void ata_sff_queue_pio_task(struct ata_link *link, unsigned long delay);
-extern unsigned int ata_sff_qc_issue(struct ata_queued_cmd *qc);
-extern bool ata_sff_qc_fill_rtf(struct ata_queued_cmd *qc);
-extern unsigned int ata_sff_port_intr(struct ata_port *ap,
-				      struct ata_queued_cmd *qc);
-extern irqreturn_t ata_sff_interrupt(int irq, void *dev_instance);
-extern void ata_sff_lost_interrupt(struct ata_port *ap);
-extern void ata_sff_freeze(struct ata_port *ap);
-extern void ata_sff_thaw(struct ata_port *ap);
-extern int ata_sff_prereset(struct ata_link *link, unsigned long deadline);
-extern unsigned int ata_sff_dev_classify(struct ata_device *dev, int present,
-					  u8 *r_err);
-extern int ata_sff_wait_after_reset(struct ata_link *link, unsigned int devmask,
-				    unsigned long deadline);
-extern int ata_sff_softreset(struct ata_link *link, unsigned int *classes,
-			     unsigned long deadline);
-extern int sata_sff_hardreset(struct ata_link *link, unsigned int *class,
-			       unsigned long deadline);
-extern void ata_sff_postreset(struct ata_link *link, unsigned int *classes);
-extern void ata_sff_drain_fifo(struct ata_queued_cmd *qc);
-extern void ata_sff_error_handler(struct ata_port *ap);
-extern void ata_sff_std_ports(struct ata_ioports *ioaddr);
-#ifdef CONFIG_PCI
-extern int ata_pci_sff_init_host(struct ata_host *host);
-extern int ata_pci_sff_prepare_host(struct pci_dev *pdev,
-				    const struct ata_port_info * const * ppi,
-				    struct ata_host **r_host);
-extern int ata_pci_sff_activate_host(struct ata_host *host,
-				     irq_handler_t irq_handler,
-				     struct scsi_host_template *sht);
-extern int ata_pci_sff_init_one(struct pci_dev *pdev,
-		const struct ata_port_info * const * ppi,
-		struct scsi_host_template *sht, void *host_priv, int hflags);
-#endif /* CONFIG_PCI */
-
-#ifdef CONFIG_ATA_BMDMA
-
-extern const struct ata_port_operations ata_bmdma_port_ops;
-
-#define ATA_BMDMA_SHT(drv_name)					\
-	ATA_BASE_SHT(drv_name),					\
-	.sg_tablesize		= LIBATA_MAX_PRD,		\
-	.dma_boundary		= ATA_DMA_BOUNDARY
-
-extern void ata_bmdma_qc_prep(struct ata_queued_cmd *qc);
-extern unsigned int ata_bmdma_qc_issue(struct ata_queued_cmd *qc);
-extern void ata_bmdma_dumb_qc_prep(struct ata_queued_cmd *qc);
-extern unsigned int ata_bmdma_port_intr(struct ata_port *ap,
-				      struct ata_queued_cmd *qc);
-extern irqreturn_t ata_bmdma_interrupt(int irq, void *dev_instance);
-extern void ata_bmdma_error_handler(struct ata_port *ap);
-extern void ata_bmdma_post_internal_cmd(struct ata_queued_cmd *qc);
-extern void ata_bmdma_irq_clear(struct ata_port *ap);
-extern void ata_bmdma_setup(struct ata_queued_cmd *qc);
-extern void ata_bmdma_start(struct ata_queued_cmd *qc);
-extern void ata_bmdma_stop(struct ata_queued_cmd *qc);
-extern u8 ata_bmdma_status(struct ata_port *ap);
-extern int ata_bmdma_port_start(struct ata_port *ap);
-extern int ata_bmdma_port_start32(struct ata_port *ap);
-
-#ifdef CONFIG_PCI
-extern int ata_pci_bmdma_clear_simplex(struct pci_dev *pdev);
-extern void ata_pci_bmdma_init(struct ata_host *host);
-extern int ata_pci_bmdma_prepare_host(struct pci_dev *pdev,
-				      const struct ata_port_info * const * ppi,
-				      struct ata_host **r_host);
-extern int ata_pci_bmdma_init_one(struct pci_dev *pdev,
-				  const struct ata_port_info * const * ppi,
-				  struct scsi_host_template *sht,
-				  void *host_priv, int hflags);
-#endif /* CONFIG_PCI */
-#endif /* CONFIG_ATA_BMDMA */
-
-/**
- *	ata_sff_busy_wait - Wait for a port status register
- *	@ap: Port to wait for.
- *	@bits: bits that must be clear
- *	@max: number of 10uS waits to perform
- *
- *	Waits up to max*10 microseconds for the selected bits in the port's
- *	status register to be cleared.
- *	Returns final value of status register.
- *
- *	LOCKING:
- *	Inherited from caller.
- */
-static inline u8 ata_sff_busy_wait(struct ata_port *ap, unsigned int bits,
-				   unsigned int max)
-{
-	u8 status;
-
-	do {
-		udelay(10);
-		status = ap->ops->sff_check_status(ap);
-		max--;
-	} while (status != 0xff && (status & bits) && (max > 0));
-
-	return status;
-}
-
-/**
- *	ata_wait_idle - Wait for a port to be idle.
- *	@ap: Port to wait for.
- *
- *	Waits up to 10ms for port's BUSY and DRQ signals to clear.
- *	Returns final value of status register.
- *
- *	LOCKING:
- *	Inherited from caller.
- */
-static inline u8 ata_wait_idle(struct ata_port *ap)
-{
-	u8 status = ata_sff_busy_wait(ap, ATA_BUSY | ATA_DRQ, 1000);
-
-#ifdef ATA_DEBUG
-	if (status != 0xff && (status & (ATA_BUSY | ATA_DRQ)))
-		ata_port_printk(ap, KERN_DEBUG, "abnormal Status 0x%X\n",
-				status);
-#endif
-
-	return status;
-}
-#endif /* CONFIG_ATA_SFF */
-
-#endif /* __LINUX_LIBATA_H__ */
diff --git a/ANDROID_3.4.5/include/linux/libps2.h b/ANDROID_3.4.5/include/linux/libps2.h
deleted file mode 100644
index 79603a6c..00000000
--- a/ANDROID_3.4.5/include/linux/libps2.h
+++ /dev/null
@@ -1,56 +0,0 @@
-#ifndef _LIBPS2_H
-#define _LIBPS2_H
-
-/*
- * Copyright (C) 1999-2002 Vojtech Pavlik
- * Copyright (C) 2004 Dmitry Torokhov
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-
-
-#define PS2_CMD_GETID		0x02f2
-#define PS2_CMD_RESET_BAT	0x02ff
-
-#define PS2_RET_BAT		0xaa
-#define PS2_RET_ID		0x00
-#define PS2_RET_ACK		0xfa
-#define PS2_RET_NAK		0xfe
-#define PS2_RET_ERR		0xfc
-
-#define PS2_FLAG_ACK		1	/* Waiting for ACK/NAK */
-#define PS2_FLAG_CMD		2	/* Waiting for command to finish */
-#define PS2_FLAG_CMD1		4	/* Waiting for the first byte of command response */
-#define PS2_FLAG_WAITID		8	/* Command execiting is GET ID */
-#define PS2_FLAG_NAK		16	/* Last transmission was NAKed */
-
-struct ps2dev {
-	struct serio *serio;
-
-	/* Ensures that only one command is executing at a time */
-	struct mutex cmd_mutex;
-
-	/* Used to signal completion from interrupt handler */
-	wait_queue_head_t wait;
-
-	unsigned long flags;
-	unsigned char cmdbuf[6];
-	unsigned char cmdcnt;
-	unsigned char nak;
-};
-
-void ps2_init(struct ps2dev *ps2dev, struct serio *serio);
-int ps2_sendbyte(struct ps2dev *ps2dev, unsigned char byte, int timeout);
-void ps2_drain(struct ps2dev *ps2dev, int maxbytes, int timeout);
-void ps2_begin_command(struct ps2dev *ps2dev);
-void ps2_end_command(struct ps2dev *ps2dev);
-int __ps2_command(struct ps2dev *ps2dev, unsigned char *param, int command);
-int ps2_command(struct ps2dev *ps2dev, unsigned char *param, int command);
-int ps2_handle_ack(struct ps2dev *ps2dev, unsigned char data);
-int ps2_handle_response(struct ps2dev *ps2dev, unsigned char data);
-void ps2_cmd_aborted(struct ps2dev *ps2dev);
-int ps2_is_keyboard_id(char id);
-
-#endif /* _LIBPS2_H */
diff --git a/ANDROID_3.4.5/include/linux/license.h b/ANDROID_3.4.5/include/linux/license.h
deleted file mode 100644
index decdbf43..00000000
--- a/ANDROID_3.4.5/include/linux/license.h
+++ /dev/null
@@ -1,14 +0,0 @@
-#ifndef __LICENSE_H
-#define __LICENSE_H
-
-static inline int license_is_gpl_compatible(const char *license)
-{
-	return (strcmp(license, "GPL") == 0
-		|| strcmp(license, "GPL v2") == 0
-		|| strcmp(license, "GPL and additional rights") == 0
-		|| strcmp(license, "Dual BSD/GPL") == 0
-		|| strcmp(license, "Dual MIT/GPL") == 0
-		|| strcmp(license, "Dual MPL/GPL") == 0);
-}
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/limits.h b/ANDROID_3.4.5/include/linux/limits.h
deleted file mode 100644
index 2d0f9416..00000000
--- a/ANDROID_3.4.5/include/linux/limits.h
+++ /dev/null
@@ -1,20 +0,0 @@
-#ifndef _LINUX_LIMITS_H
-#define _LINUX_LIMITS_H
-
-#define NR_OPEN	        1024
-
-#define NGROUPS_MAX    65536	/* supplemental group IDs are available */
-#define ARG_MAX       131072	/* # bytes of args + environ for exec() */
-#define LINK_MAX         127	/* # links a file may have */
-#define MAX_CANON        255	/* size of the canonical input queue */
-#define MAX_INPUT        255	/* size of the type-ahead buffer */
-#define NAME_MAX         255	/* # chars in a file name */
-#define PATH_MAX        4096	/* # chars in a path name including nul */
-#define PIPE_BUF        4096	/* # bytes in atomic write to a pipe */
-#define XATTR_NAME_MAX   255	/* # chars in an extended attribute name */
-#define XATTR_SIZE_MAX 65536	/* size of an extended attribute value (64k) */
-#define XATTR_LIST_MAX 65536	/* size of extended attribute namelist (64k) */
-
-#define RTSIG_MAX	  32
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/linkage.h b/ANDROID_3.4.5/include/linux/linkage.h
deleted file mode 100644
index 807f1e53..00000000
--- a/ANDROID_3.4.5/include/linux/linkage.h
+++ /dev/null
@@ -1,91 +0,0 @@
-#ifndef _LINUX_LINKAGE_H
-#define _LINUX_LINKAGE_H
-
-#include <linux/compiler.h>
-#include <asm/linkage.h>
-
-#ifdef __cplusplus
-#define CPP_ASMLINKAGE extern "C"
-#else
-#define CPP_ASMLINKAGE
-#endif
-
-#ifndef asmlinkage
-#define asmlinkage CPP_ASMLINKAGE
-#endif
-
-#define __page_aligned_data	__section(.data..page_aligned) __aligned(PAGE_SIZE)
-#define __page_aligned_bss	__section(.bss..page_aligned) __aligned(PAGE_SIZE)
-
-/*
- * For assembly routines.
- *
- * Note when using these that you must specify the appropriate
- * alignment directives yourself
- */
-#define __PAGE_ALIGNED_DATA	.section ".data..page_aligned", "aw"
-#define __PAGE_ALIGNED_BSS	.section ".bss..page_aligned", "aw"
-
-/*
- * This is used by architectures to keep arguments on the stack
- * untouched by the compiler by keeping them live until the end.
- * The argument stack may be owned by the assembly-language
- * caller, not the callee, and gcc doesn't always understand
- * that.
- *
- * We have the return value, and a maximum of six arguments.
- *
- * This should always be followed by a "return ret" for the
- * protection to work (ie no more work that the compiler might
- * end up needing stack temporaries for).
- */
-/* Assembly files may be compiled with -traditional .. */
-#ifndef __ASSEMBLY__
-#ifndef asmlinkage_protect
-# define asmlinkage_protect(n, ret, args...)	do { } while (0)
-#endif
-#endif
-
-#ifndef __ALIGN
-#define __ALIGN		.align 4,0x90
-#define __ALIGN_STR	".align 4,0x90"
-#endif
-
-#ifdef __ASSEMBLY__
-
-#ifndef LINKER_SCRIPT
-#define ALIGN __ALIGN
-#define ALIGN_STR __ALIGN_STR
-
-#ifndef ENTRY
-#define ENTRY(name) \
-  .globl name; \
-  ALIGN; \
-  name:
-#endif
-#endif /* LINKER_SCRIPT */
-
-#ifndef WEAK
-#define WEAK(name)	   \
-	.weak name;	   \
-	name:
-#endif
-
-#ifndef END
-#define END(name) \
-  .size name, .-name
-#endif
-
-/* If symbol 'name' is treated as a subroutine (gets called, and returns)
- * then please use ENDPROC to mark 'name' as STT_FUNC for the benefit of
- * static analysis tools such as stack depth analyzer.
- */
-#ifndef ENDPROC
-#define ENDPROC(name) \
-  .type name, @function; \
-  END(name)
-#endif
-
-#endif
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/linux_logo.h b/ANDROID_3.4.5/include/linux/linux_logo.h
deleted file mode 100644
index ca5bd91d..00000000
--- a/ANDROID_3.4.5/include/linux/linux_logo.h
+++ /dev/null
@@ -1,61 +0,0 @@
-#ifndef _LINUX_LINUX_LOGO_H
-#define _LINUX_LINUX_LOGO_H
-
-/*
- *  Linux logo to be displayed on boot
- *
- *  Copyright (C) 1996 Larry Ewing (lewing@isc.tamu.edu)
- *  Copyright (C) 1996,1998 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
- *  Copyright (C) 2001 Greg Banks <gnb@alphalink.com.au>
- *  Copyright (C) 2001 Jan-Benedict Glaw <jbglaw@lug-owl.de>
- *  Copyright (C) 2003 Geert Uytterhoeven <geert@linux-m68k.org>
- *
- *  Serial_console ascii image can be any size,
- *  but should contain %s to display the version
- */
-
-#include <linux/init.h>
-
-
-#define LINUX_LOGO_MONO		1	/* monochrome black/white */
-#define LINUX_LOGO_VGA16	2	/* 16 colors VGA text palette */
-#define LINUX_LOGO_CLUT224	3	/* 224 colors */
-#define LINUX_LOGO_GRAY256	4	/* 256 levels grayscale */
-
-
-struct linux_logo {
-	int type;			/* one of LINUX_LOGO_* */
-	unsigned int width;
-	unsigned int height;
-	unsigned int clutsize;		/* LINUX_LOGO_CLUT224 only */
-	const unsigned char *clut;	/* LINUX_LOGO_CLUT224 only */
-	const unsigned char *data;
-};
-
-extern const struct linux_logo logo_linux_mono;
-extern const struct linux_logo logo_linux_vga16;
-extern const struct linux_logo logo_linux_clut224;
-extern const struct linux_logo logo_blackfin_vga16;
-extern const struct linux_logo logo_blackfin_clut224;
-extern const struct linux_logo logo_dec_clut224;
-extern const struct linux_logo logo_mac_clut224;
-extern const struct linux_logo logo_parisc_clut224;
-extern const struct linux_logo logo_sgi_clut224;
-extern const struct linux_logo logo_sun_clut224;
-extern const struct linux_logo logo_superh_mono;
-extern const struct linux_logo logo_superh_vga16;
-extern const struct linux_logo logo_superh_clut224;
-extern const struct linux_logo logo_m32r_clut224;
-extern const struct linux_logo logo_spe_clut224;
-
-extern const struct linux_logo *fb_find_logo(int depth);
-#ifdef CONFIG_FB_LOGO_EXTRA
-extern void fb_append_extra_logo(const struct linux_logo *logo,
-				 unsigned int n);
-#else
-static inline void fb_append_extra_logo(const struct linux_logo *logo,
-					unsigned int n)
-{}
-#endif
-
-#endif /* _LINUX_LINUX_LOGO_H */
diff --git a/ANDROID_3.4.5/include/linux/lis3lv02d.h b/ANDROID_3.4.5/include/linux/lis3lv02d.h
deleted file mode 100644
index f1664c63..00000000
--- a/ANDROID_3.4.5/include/linux/lis3lv02d.h
+++ /dev/null
@@ -1,127 +0,0 @@
-#ifndef __LIS3LV02D_H_
-#define __LIS3LV02D_H_
-
-/**
- * struct lis3lv02d_platform_data - lis3 chip family platform data
- * @click_flags:	Click detection unit configuration
- * @click_thresh_x:	Click detection unit x axis threshold
- * @click_thresh_y:	Click detection unit y axis threshold
- * @click_thresh_z:	Click detection unit z axis threshold
- * @click_time_limit:	Click detection unit time parameter
- * @click_latency:	Click detection unit latency parameter
- * @click_window:	Click detection unit window parameter
- * @irq_cfg:		On chip irq source and type configuration (click /
- *			data available / wake up, open drain, polarity)
- * @irq_flags1:		Additional irq triggering flags for irq channel 0
- * @irq_flags2:		Additional irq triggering flags for irq channel 1
- * @duration1:		Wake up unit 1 duration parameter
- * @duration2:		Wake up unit 2 duration parameter
- * @wakeup_flags:	Wake up unit 1 flags
- * @wakeup_thresh:	Wake up unit 1 threshold value
- * @wakeup_flags2:	Wake up unit 2 flags
- * @wakeup_thresh2:	Wake up unit 2 threshold value
- * @hipass_ctrl:	High pass filter control (enable / disable, cut off
- *			frequency)
- * @axis_x:		Sensor orientation remapping for x-axis
- * @axis_y:		Sensor orientation remapping for y-axis
- * @axis_z:		Sensor orientation remapping for z-axis
- * @driver_features:	Enable bits for different features. Disabled by default
- * @default_rate:	Default sampling rate. 0 means reset default
- * @setup_resources:	Interrupt line setup call back function
- * @release_resources:	Interrupt line release call back function
- * @st_min_limits[3]:	Selftest acceptance minimum values
- * @st_max_limits[3]:	Selftest acceptance maximum values
- * @irq2:		Irq line 2 number
- *
- * Platform data is used to setup the sensor chip. Meaning of the different
- * chip features can be found from the data sheet. It is publicly available
- * at www.st.com web pages. Currently the platform data is used
- * only for the 8 bit device. The 8 bit device has two wake up / free fall
- * detection units and click detection unit. There are plenty of ways to
- * configure the chip which makes is quite hard to explain deeper meaning of
- * the fields here. Behaviour of the detection blocks varies heavily depending
- * on the configuration. For example, interrupt detection block can use high
- * pass filtered data which makes it react to the changes in the acceleration.
- * Irq_flags can be used to enable interrupt detection on the both edges.
- * With proper chip configuration this produces interrupt when some trigger
- * starts and when it goes away.
- */
-
-struct lis3lv02d_platform_data {
-	/* please note: the 'click' feature is only supported for
-	 * LIS[32]02DL variants of the chip and will be ignored for
-	 * others */
-#define LIS3_CLICK_SINGLE_X	(1 << 0)
-#define LIS3_CLICK_DOUBLE_X	(1 << 1)
-#define LIS3_CLICK_SINGLE_Y	(1 << 2)
-#define LIS3_CLICK_DOUBLE_Y	(1 << 3)
-#define LIS3_CLICK_SINGLE_Z	(1 << 4)
-#define LIS3_CLICK_DOUBLE_Z	(1 << 5)
-	unsigned char click_flags;
-	unsigned char click_thresh_x;
-	unsigned char click_thresh_y;
-	unsigned char click_thresh_z;
-	unsigned char click_time_limit;
-	unsigned char click_latency;
-	unsigned char click_window;
-
-#define LIS3_IRQ1_DISABLE	(0 << 0)
-#define LIS3_IRQ1_FF_WU_1	(1 << 0)
-#define LIS3_IRQ1_FF_WU_2	(2 << 0)
-#define LIS3_IRQ1_FF_WU_12	(3 << 0)
-#define LIS3_IRQ1_DATA_READY	(4 << 0)
-#define LIS3_IRQ1_CLICK		(7 << 0)
-#define LIS3_IRQ1_MASK		(7 << 0)
-#define LIS3_IRQ2_DISABLE	(0 << 3)
-#define LIS3_IRQ2_FF_WU_1	(1 << 3)
-#define LIS3_IRQ2_FF_WU_2	(2 << 3)
-#define LIS3_IRQ2_FF_WU_12	(3 << 3)
-#define LIS3_IRQ2_DATA_READY	(4 << 3)
-#define LIS3_IRQ2_CLICK		(7 << 3)
-#define LIS3_IRQ2_MASK		(7 << 3)
-#define LIS3_IRQ_OPEN_DRAIN	(1 << 6)
-#define LIS3_IRQ_ACTIVE_LOW	(1 << 7)
-	unsigned char irq_cfg;
-	unsigned char irq_flags1; /* Additional irq edge / level flags */
-	unsigned char irq_flags2; /* Additional irq edge / level flags */
-	unsigned char duration1;
-	unsigned char duration2;
-#define LIS3_WAKEUP_X_LO	(1 << 0)
-#define LIS3_WAKEUP_X_HI	(1 << 1)
-#define LIS3_WAKEUP_Y_LO	(1 << 2)
-#define LIS3_WAKEUP_Y_HI	(1 << 3)
-#define LIS3_WAKEUP_Z_LO	(1 << 4)
-#define LIS3_WAKEUP_Z_HI	(1 << 5)
-	unsigned char wakeup_flags;
-	unsigned char wakeup_thresh;
-	unsigned char wakeup_flags2;
-	unsigned char wakeup_thresh2;
-#define LIS3_HIPASS_CUTFF_8HZ   0
-#define LIS3_HIPASS_CUTFF_4HZ   1
-#define LIS3_HIPASS_CUTFF_2HZ   2
-#define LIS3_HIPASS_CUTFF_1HZ   3
-#define LIS3_HIPASS1_DISABLE    (1 << 2)
-#define LIS3_HIPASS2_DISABLE    (1 << 3)
-	unsigned char hipass_ctrl;
-#define LIS3_NO_MAP		0
-#define LIS3_DEV_X		1
-#define LIS3_DEV_Y		2
-#define LIS3_DEV_Z		3
-#define LIS3_INV_DEV_X	       -1
-#define LIS3_INV_DEV_Y	       -2
-#define LIS3_INV_DEV_Z	       -3
-	s8 axis_x;
-	s8 axis_y;
-	s8 axis_z;
-#define LIS3_USE_BLOCK_READ	0x02
-	u16 driver_features;
-	int default_rate;
-	int (*setup_resources)(void);
-	int (*release_resources)(void);
-	/* Limits for selftest are specified in chip data sheet */
-	s16 st_min_limits[3]; /* min pass limit x, y, z */
-	s16 st_max_limits[3]; /* max pass limit x, y, z */
-	int irq2;
-};
-
-#endif /* __LIS3LV02D_H_ */
diff --git a/ANDROID_3.4.5/include/linux/list.h b/ANDROID_3.4.5/include/linux/list.h
deleted file mode 100644
index cc6d2aa6..00000000
--- a/ANDROID_3.4.5/include/linux/list.h
+++ /dev/null
@@ -1,719 +0,0 @@
-#ifndef _LINUX_LIST_H
-#define _LINUX_LIST_H
-
-#include <linux/types.h>
-#include <linux/stddef.h>
-#include <linux/poison.h>
-#include <linux/const.h>
-
-/*
- * Simple doubly linked list implementation.
- *
- * Some of the internal functions ("__xxx") are useful when
- * manipulating whole lists rather than single entries, as
- * sometimes we already know the next/prev entries and we can
- * generate better code by using them directly rather than
- * using the generic single-entry routines.
- */
-
-#define LIST_HEAD_INIT(name) { &(name), &(name) }
-
-#define LIST_HEAD(name) \
-	struct list_head name = LIST_HEAD_INIT(name)
-
-static inline void INIT_LIST_HEAD(struct list_head *list)
-{
-	list->next = list;
-	list->prev = list;
-}
-
-/*
- * Insert a new entry between two known consecutive entries.
- *
- * This is only for internal list manipulation where we know
- * the prev/next entries already!
- */
-#ifndef CONFIG_DEBUG_LIST
-static inline void __list_add(struct list_head *new,
-			      struct list_head *prev,
-			      struct list_head *next)
-{
-	next->prev = new;
-	new->next = next;
-	new->prev = prev;
-	prev->next = new;
-}
-#else
-extern void __list_add(struct list_head *new,
-			      struct list_head *prev,
-			      struct list_head *next);
-#endif
-
-/**
- * list_add - add a new entry
- * @new: new entry to be added
- * @head: list head to add it after
- *
- * Insert a new entry after the specified head.
- * This is good for implementing stacks.
- */
-static inline void list_add(struct list_head *new, struct list_head *head)
-{
-	__list_add(new, head, head->next);
-}
-
-
-/**
- * list_add_tail - add a new entry
- * @new: new entry to be added
- * @head: list head to add it before
- *
- * Insert a new entry before the specified head.
- * This is useful for implementing queues.
- */
-static inline void list_add_tail(struct list_head *new, struct list_head *head)
-{
-	__list_add(new, head->prev, head);
-}
-
-/*
- * Delete a list entry by making the prev/next entries
- * point to each other.
- *
- * This is only for internal list manipulation where we know
- * the prev/next entries already!
- */
-static inline void __list_del(struct list_head * prev, struct list_head * next)
-{
-	next->prev = prev;
-	prev->next = next;
-}
-
-/**
- * list_del - deletes entry from list.
- * @entry: the element to delete from the list.
- * Note: list_empty() on entry does not return true after this, the entry is
- * in an undefined state.
- */
-#ifndef CONFIG_DEBUG_LIST
-static inline void __list_del_entry(struct list_head *entry)
-{
-	__list_del(entry->prev, entry->next);
-}
-
-static inline void list_del(struct list_head *entry)
-{
-	__list_del(entry->prev, entry->next);
-	entry->next = LIST_POISON1;
-	entry->prev = LIST_POISON2;
-}
-#else
-extern void __list_del_entry(struct list_head *entry);
-extern void list_del(struct list_head *entry);
-#endif
-
-/**
- * list_replace - replace old entry by new one
- * @old : the element to be replaced
- * @new : the new element to insert
- *
- * If @old was empty, it will be overwritten.
- */
-static inline void list_replace(struct list_head *old,
-				struct list_head *new)
-{
-	new->next = old->next;
-	new->next->prev = new;
-	new->prev = old->prev;
-	new->prev->next = new;
-}
-
-static inline void list_replace_init(struct list_head *old,
-					struct list_head *new)
-{
-	list_replace(old, new);
-	INIT_LIST_HEAD(old);
-}
-
-/**
- * list_del_init - deletes entry from list and reinitialize it.
- * @entry: the element to delete from the list.
- */
-static inline void list_del_init(struct list_head *entry)
-{
-	__list_del_entry(entry);
-	INIT_LIST_HEAD(entry);
-}
-
-/**
- * list_move - delete from one list and add as another's head
- * @list: the entry to move
- * @head: the head that will precede our entry
- */
-static inline void list_move(struct list_head *list, struct list_head *head)
-{
-	__list_del_entry(list);
-	list_add(list, head);
-}
-
-/**
- * list_move_tail - delete from one list and add as another's tail
- * @list: the entry to move
- * @head: the head that will follow our entry
- */
-static inline void list_move_tail(struct list_head *list,
-				  struct list_head *head)
-{
-	__list_del_entry(list);
-	list_add_tail(list, head);
-}
-
-/**
- * list_is_last - tests whether @list is the last entry in list @head
- * @list: the entry to test
- * @head: the head of the list
- */
-static inline int list_is_last(const struct list_head *list,
-				const struct list_head *head)
-{
-	return list->next == head;
-}
-
-/**
- * list_empty - tests whether a list is empty
- * @head: the list to test.
- */
-static inline int list_empty(const struct list_head *head)
-{
-	return head->next == head;
-}
-
-/**
- * list_empty_careful - tests whether a list is empty and not being modified
- * @head: the list to test
- *
- * Description:
- * tests whether a list is empty _and_ checks that no other CPU might be
- * in the process of modifying either member (next or prev)
- *
- * NOTE: using list_empty_careful() without synchronization
- * can only be safe if the only activity that can happen
- * to the list entry is list_del_init(). Eg. it cannot be used
- * if another CPU could re-list_add() it.
- */
-static inline int list_empty_careful(const struct list_head *head)
-{
-	struct list_head *next = head->next;
-	return (next == head) && (next == head->prev);
-}
-
-/**
- * list_rotate_left - rotate the list to the left
- * @head: the head of the list
- */
-static inline void list_rotate_left(struct list_head *head)
-{
-	struct list_head *first;
-
-	if (!list_empty(head)) {
-		first = head->next;
-		list_move_tail(first, head);
-	}
-}
-
-/**
- * list_is_singular - tests whether a list has just one entry.
- * @head: the list to test.
- */
-static inline int list_is_singular(const struct list_head *head)
-{
-	return !list_empty(head) && (head->next == head->prev);
-}
-
-static inline void __list_cut_position(struct list_head *list,
-		struct list_head *head, struct list_head *entry)
-{
-	struct list_head *new_first = entry->next;
-	list->next = head->next;
-	list->next->prev = list;
-	list->prev = entry;
-	entry->next = list;
-	head->next = new_first;
-	new_first->prev = head;
-}
-
-/**
- * list_cut_position - cut a list into two
- * @list: a new list to add all removed entries
- * @head: a list with entries
- * @entry: an entry within head, could be the head itself
- *	and if so we won't cut the list
- *
- * This helper moves the initial part of @head, up to and
- * including @entry, from @head to @list. You should
- * pass on @entry an element you know is on @head. @list
- * should be an empty list or a list you do not care about
- * losing its data.
- *
- */
-static inline void list_cut_position(struct list_head *list,
-		struct list_head *head, struct list_head *entry)
-{
-	if (list_empty(head))
-		return;
-	if (list_is_singular(head) &&
-		(head->next != entry && head != entry))
-		return;
-	if (entry == head)
-		INIT_LIST_HEAD(list);
-	else
-		__list_cut_position(list, head, entry);
-}
-
-static inline void __list_splice(const struct list_head *list,
-				 struct list_head *prev,
-				 struct list_head *next)
-{
-	struct list_head *first = list->next;
-	struct list_head *last = list->prev;
-
-	first->prev = prev;
-	prev->next = first;
-
-	last->next = next;
-	next->prev = last;
-}
-
-/**
- * list_splice - join two lists, this is designed for stacks
- * @list: the new list to add.
- * @head: the place to add it in the first list.
- */
-static inline void list_splice(const struct list_head *list,
-				struct list_head *head)
-{
-	if (!list_empty(list))
-		__list_splice(list, head, head->next);
-}
-
-/**
- * list_splice_tail - join two lists, each list being a queue
- * @list: the new list to add.
- * @head: the place to add it in the first list.
- */
-static inline void list_splice_tail(struct list_head *list,
-				struct list_head *head)
-{
-	if (!list_empty(list))
-		__list_splice(list, head->prev, head);
-}
-
-/**
- * list_splice_init - join two lists and reinitialise the emptied list.
- * @list: the new list to add.
- * @head: the place to add it in the first list.
- *
- * The list at @list is reinitialised
- */
-static inline void list_splice_init(struct list_head *list,
-				    struct list_head *head)
-{
-	if (!list_empty(list)) {
-		__list_splice(list, head, head->next);
-		INIT_LIST_HEAD(list);
-	}
-}
-
-/**
- * list_splice_tail_init - join two lists and reinitialise the emptied list
- * @list: the new list to add.
- * @head: the place to add it in the first list.
- *
- * Each of the lists is a queue.
- * The list at @list is reinitialised
- */
-static inline void list_splice_tail_init(struct list_head *list,
-					 struct list_head *head)
-{
-	if (!list_empty(list)) {
-		__list_splice(list, head->prev, head);
-		INIT_LIST_HEAD(list);
-	}
-}
-
-/**
- * list_entry - get the struct for this entry
- * @ptr:	the &struct list_head pointer.
- * @type:	the type of the struct this is embedded in.
- * @member:	the name of the list_struct within the struct.
- */
-#define list_entry(ptr, type, member) \
-	container_of(ptr, type, member)
-
-/**
- * list_first_entry - get the first element from a list
- * @ptr:	the list head to take the element from.
- * @type:	the type of the struct this is embedded in.
- * @member:	the name of the list_struct within the struct.
- *
- * Note, that list is expected to be not empty.
- */
-#define list_first_entry(ptr, type, member) \
-	list_entry((ptr)->next, type, member)
-
-/**
- * list_for_each	-	iterate over a list
- * @pos:	the &struct list_head to use as a loop cursor.
- * @head:	the head for your list.
- */
-#define list_for_each(pos, head) \
-	for (pos = (head)->next; pos != (head); pos = pos->next)
-
-/**
- * __list_for_each	-	iterate over a list
- * @pos:	the &struct list_head to use as a loop cursor.
- * @head:	the head for your list.
- *
- * This variant doesn't differ from list_for_each() any more.
- * We don't do prefetching in either case.
- */
-#define __list_for_each(pos, head) \
-	for (pos = (head)->next; pos != (head); pos = pos->next)
-
-/**
- * list_for_each_prev	-	iterate over a list backwards
- * @pos:	the &struct list_head to use as a loop cursor.
- * @head:	the head for your list.
- */
-#define list_for_each_prev(pos, head) \
-	for (pos = (head)->prev; pos != (head); pos = pos->prev)
-
-/**
- * list_for_each_safe - iterate over a list safe against removal of list entry
- * @pos:	the &struct list_head to use as a loop cursor.
- * @n:		another &struct list_head to use as temporary storage
- * @head:	the head for your list.
- */
-#define list_for_each_safe(pos, n, head) \
-	for (pos = (head)->next, n = pos->next; pos != (head); \
-		pos = n, n = pos->next)
-
-/**
- * list_for_each_prev_safe - iterate over a list backwards safe against removal of list entry
- * @pos:	the &struct list_head to use as a loop cursor.
- * @n:		another &struct list_head to use as temporary storage
- * @head:	the head for your list.
- */
-#define list_for_each_prev_safe(pos, n, head) \
-	for (pos = (head)->prev, n = pos->prev; \
-	     pos != (head); \
-	     pos = n, n = pos->prev)
-
-/**
- * list_for_each_entry	-	iterate over list of given type
- * @pos:	the type * to use as a loop cursor.
- * @head:	the head for your list.
- * @member:	the name of the list_struct within the struct.
- */
-#define list_for_each_entry(pos, head, member)				\
-	for (pos = list_entry((head)->next, typeof(*pos), member);	\
-	     &pos->member != (head); 	\
-	     pos = list_entry(pos->member.next, typeof(*pos), member))
-
-/**
- * list_for_each_entry_reverse - iterate backwards over list of given type.
- * @pos:	the type * to use as a loop cursor.
- * @head:	the head for your list.
- * @member:	the name of the list_struct within the struct.
- */
-#define list_for_each_entry_reverse(pos, head, member)			\
-	for (pos = list_entry((head)->prev, typeof(*pos), member);	\
-	     &pos->member != (head); 	\
-	     pos = list_entry(pos->member.prev, typeof(*pos), member))
-
-/**
- * list_prepare_entry - prepare a pos entry for use in list_for_each_entry_continue()
- * @pos:	the type * to use as a start point
- * @head:	the head of the list
- * @member:	the name of the list_struct within the struct.
- *
- * Prepares a pos entry for use as a start point in list_for_each_entry_continue().
- */
-#define list_prepare_entry(pos, head, member) \
-	((pos) ? : list_entry(head, typeof(*pos), member))
-
-/**
- * list_for_each_entry_continue - continue iteration over list of given type
- * @pos:	the type * to use as a loop cursor.
- * @head:	the head for your list.
- * @member:	the name of the list_struct within the struct.
- *
- * Continue to iterate over list of given type, continuing after
- * the current position.
- */
-#define list_for_each_entry_continue(pos, head, member) 		\
-	for (pos = list_entry(pos->member.next, typeof(*pos), member);	\
-	     &pos->member != (head);	\
-	     pos = list_entry(pos->member.next, typeof(*pos), member))
-
-/**
- * list_for_each_entry_continue_reverse - iterate backwards from the given point
- * @pos:	the type * to use as a loop cursor.
- * @head:	the head for your list.
- * @member:	the name of the list_struct within the struct.
- *
- * Start to iterate over list of given type backwards, continuing after
- * the current position.
- */
-#define list_for_each_entry_continue_reverse(pos, head, member)		\
-	for (pos = list_entry(pos->member.prev, typeof(*pos), member);	\
-	     &pos->member != (head);	\
-	     pos = list_entry(pos->member.prev, typeof(*pos), member))
-
-/**
- * list_for_each_entry_from - iterate over list of given type from the current point
- * @pos:	the type * to use as a loop cursor.
- * @head:	the head for your list.
- * @member:	the name of the list_struct within the struct.
- *
- * Iterate over list of given type, continuing from current position.
- */
-#define list_for_each_entry_from(pos, head, member) 			\
-	for (; &pos->member != (head);	\
-	     pos = list_entry(pos->member.next, typeof(*pos), member))
-
-/**
- * list_for_each_entry_safe - iterate over list of given type safe against removal of list entry
- * @pos:	the type * to use as a loop cursor.
- * @n:		another type * to use as temporary storage
- * @head:	the head for your list.
- * @member:	the name of the list_struct within the struct.
- */
-#define list_for_each_entry_safe(pos, n, head, member)			\
-	for (pos = list_entry((head)->next, typeof(*pos), member),	\
-		n = list_entry(pos->member.next, typeof(*pos), member);	\
-	     &pos->member != (head); 					\
-	     pos = n, n = list_entry(n->member.next, typeof(*n), member))
-
-/**
- * list_for_each_entry_safe_continue - continue list iteration safe against removal
- * @pos:	the type * to use as a loop cursor.
- * @n:		another type * to use as temporary storage
- * @head:	the head for your list.
- * @member:	the name of the list_struct within the struct.
- *
- * Iterate over list of given type, continuing after current point,
- * safe against removal of list entry.
- */
-#define list_for_each_entry_safe_continue(pos, n, head, member) 		\
-	for (pos = list_entry(pos->member.next, typeof(*pos), member), 		\
-		n = list_entry(pos->member.next, typeof(*pos), member);		\
-	     &pos->member != (head);						\
-	     pos = n, n = list_entry(n->member.next, typeof(*n), member))
-
-/**
- * list_for_each_entry_safe_from - iterate over list from current point safe against removal
- * @pos:	the type * to use as a loop cursor.
- * @n:		another type * to use as temporary storage
- * @head:	the head for your list.
- * @member:	the name of the list_struct within the struct.
- *
- * Iterate over list of given type from current point, safe against
- * removal of list entry.
- */
-#define list_for_each_entry_safe_from(pos, n, head, member) 			\
-	for (n = list_entry(pos->member.next, typeof(*pos), member);		\
-	     &pos->member != (head);						\
-	     pos = n, n = list_entry(n->member.next, typeof(*n), member))
-
-/**
- * list_for_each_entry_safe_reverse - iterate backwards over list safe against removal
- * @pos:	the type * to use as a loop cursor.
- * @n:		another type * to use as temporary storage
- * @head:	the head for your list.
- * @member:	the name of the list_struct within the struct.
- *
- * Iterate backwards over list of given type, safe against removal
- * of list entry.
- */
-#define list_for_each_entry_safe_reverse(pos, n, head, member)		\
-	for (pos = list_entry((head)->prev, typeof(*pos), member),	\
-		n = list_entry(pos->member.prev, typeof(*pos), member);	\
-	     &pos->member != (head); 					\
-	     pos = n, n = list_entry(n->member.prev, typeof(*n), member))
-
-/**
- * list_safe_reset_next - reset a stale list_for_each_entry_safe loop
- * @pos:	the loop cursor used in the list_for_each_entry_safe loop
- * @n:		temporary storage used in list_for_each_entry_safe
- * @member:	the name of the list_struct within the struct.
- *
- * list_safe_reset_next is not safe to use in general if the list may be
- * modified concurrently (eg. the lock is dropped in the loop body). An
- * exception to this is if the cursor element (pos) is pinned in the list,
- * and list_safe_reset_next is called after re-taking the lock and before
- * completing the current iteration of the loop body.
- */
-#define list_safe_reset_next(pos, n, member)				\
-	n = list_entry(pos->member.next, typeof(*pos), member)
-
-/*
- * Double linked lists with a single pointer list head.
- * Mostly useful for hash tables where the two pointer list head is
- * too wasteful.
- * You lose the ability to access the tail in O(1).
- */
-
-#define HLIST_HEAD_INIT { .first = NULL }
-#define HLIST_HEAD(name) struct hlist_head name = {  .first = NULL }
-#define INIT_HLIST_HEAD(ptr) ((ptr)->first = NULL)
-static inline void INIT_HLIST_NODE(struct hlist_node *h)
-{
-	h->next = NULL;
-	h->pprev = NULL;
-}
-
-static inline int hlist_unhashed(const struct hlist_node *h)
-{
-	return !h->pprev;
-}
-
-static inline int hlist_empty(const struct hlist_head *h)
-{
-	return !h->first;
-}
-
-static inline void __hlist_del(struct hlist_node *n)
-{
-	struct hlist_node *next = n->next;
-	struct hlist_node **pprev = n->pprev;
-	*pprev = next;
-	if (next)
-		next->pprev = pprev;
-}
-
-static inline void hlist_del(struct hlist_node *n)
-{
-	__hlist_del(n);
-	n->next = LIST_POISON1;
-	n->pprev = LIST_POISON2;
-}
-
-static inline void hlist_del_init(struct hlist_node *n)
-{
-	if (!hlist_unhashed(n)) {
-		__hlist_del(n);
-		INIT_HLIST_NODE(n);
-	}
-}
-
-static inline void hlist_add_head(struct hlist_node *n, struct hlist_head *h)
-{
-	struct hlist_node *first = h->first;
-	n->next = first;
-	if (first)
-		first->pprev = &n->next;
-	h->first = n;
-	n->pprev = &h->first;
-}
-
-/* next must be != NULL */
-static inline void hlist_add_before(struct hlist_node *n,
-					struct hlist_node *next)
-{
-	n->pprev = next->pprev;
-	n->next = next;
-	next->pprev = &n->next;
-	*(n->pprev) = n;
-}
-
-static inline void hlist_add_after(struct hlist_node *n,
-					struct hlist_node *next)
-{
-	next->next = n->next;
-	n->next = next;
-	next->pprev = &n->next;
-
-	if(next->next)
-		next->next->pprev  = &next->next;
-}
-
-/* after that we'll appear to be on some hlist and hlist_del will work */
-static inline void hlist_add_fake(struct hlist_node *n)
-{
-	n->pprev = &n->next;
-}
-
-/*
- * Move a list from one list head to another. Fixup the pprev
- * reference of the first entry if it exists.
- */
-static inline void hlist_move_list(struct hlist_head *old,
-				   struct hlist_head *new)
-{
-	new->first = old->first;
-	if (new->first)
-		new->first->pprev = &new->first;
-	old->first = NULL;
-}
-
-#define hlist_entry(ptr, type, member) container_of(ptr,type,member)
-
-#define hlist_for_each(pos, head) \
-	for (pos = (head)->first; pos ; pos = pos->next)
-
-#define hlist_for_each_safe(pos, n, head) \
-	for (pos = (head)->first; pos && ({ n = pos->next; 1; }); \
-	     pos = n)
-
-/**
- * hlist_for_each_entry	- iterate over list of given type
- * @tpos:	the type * to use as a loop cursor.
- * @pos:	the &struct hlist_node to use as a loop cursor.
- * @head:	the head for your list.
- * @member:	the name of the hlist_node within the struct.
- */
-#define hlist_for_each_entry(tpos, pos, head, member)			 \
-	for (pos = (head)->first;					 \
-	     pos &&							 \
-		({ tpos = hlist_entry(pos, typeof(*tpos), member); 1;}); \
-	     pos = pos->next)
-
-/**
- * hlist_for_each_entry_continue - iterate over a hlist continuing after current point
- * @tpos:	the type * to use as a loop cursor.
- * @pos:	the &struct hlist_node to use as a loop cursor.
- * @member:	the name of the hlist_node within the struct.
- */
-#define hlist_for_each_entry_continue(tpos, pos, member)		 \
-	for (pos = (pos)->next;						 \
-	     pos &&							 \
-		({ tpos = hlist_entry(pos, typeof(*tpos), member); 1;}); \
-	     pos = pos->next)
-
-/**
- * hlist_for_each_entry_from - iterate over a hlist continuing from current point
- * @tpos:	the type * to use as a loop cursor.
- * @pos:	the &struct hlist_node to use as a loop cursor.
- * @member:	the name of the hlist_node within the struct.
- */
-#define hlist_for_each_entry_from(tpos, pos, member)			 \
-	for (; pos &&							 \
-		({ tpos = hlist_entry(pos, typeof(*tpos), member); 1;}); \
-	     pos = pos->next)
-
-/**
- * hlist_for_each_entry_safe - iterate over list of given type safe against removal of list entry
- * @tpos:	the type * to use as a loop cursor.
- * @pos:	the &struct hlist_node to use as a loop cursor.
- * @n:		another &struct hlist_node to use as temporary storage
- * @head:	the head for your list.
- * @member:	the name of the hlist_node within the struct.
- */
-#define hlist_for_each_entry_safe(tpos, pos, n, head, member) 		 \
-	for (pos = (head)->first;					 \
-	     pos && ({ n = pos->next; 1; }) && 				 \
-		({ tpos = hlist_entry(pos, typeof(*tpos), member); 1;}); \
-	     pos = n)
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/list_bl.h b/ANDROID_3.4.5/include/linux/list_bl.h
deleted file mode 100644
index 31f9d75a..00000000
--- a/ANDROID_3.4.5/include/linux/list_bl.h
+++ /dev/null
@@ -1,156 +0,0 @@
-#ifndef _LINUX_LIST_BL_H
-#define _LINUX_LIST_BL_H
-
-#include <linux/list.h>
-#include <linux/bit_spinlock.h>
-
-/*
- * Special version of lists, where head of the list has a lock in the lowest
- * bit. This is useful for scalable hash tables without increasing memory
- * footprint overhead.
- *
- * For modification operations, the 0 bit of hlist_bl_head->first
- * pointer must be set.
- *
- * With some small modifications, this can easily be adapted to store several
- * arbitrary bits (not just a single lock bit), if the need arises to store
- * some fast and compact auxiliary data.
- */
-
-#if defined(CONFIG_SMP) || defined(CONFIG_DEBUG_SPINLOCK)
-#define LIST_BL_LOCKMASK	1UL
-#else
-#define LIST_BL_LOCKMASK	0UL
-#endif
-
-#ifdef CONFIG_DEBUG_LIST
-#define LIST_BL_BUG_ON(x) BUG_ON(x)
-#else
-#define LIST_BL_BUG_ON(x)
-#endif
-
-
-struct hlist_bl_head {
-	struct hlist_bl_node *first;
-};
-
-struct hlist_bl_node {
-	struct hlist_bl_node *next, **pprev;
-};
-#define INIT_HLIST_BL_HEAD(ptr) \
-	((ptr)->first = NULL)
-
-static inline void INIT_HLIST_BL_NODE(struct hlist_bl_node *h)
-{
-	h->next = NULL;
-	h->pprev = NULL;
-}
-
-#define hlist_bl_entry(ptr, type, member) container_of(ptr,type,member)
-
-static inline int hlist_bl_unhashed(const struct hlist_bl_node *h)
-{
-	return !h->pprev;
-}
-
-static inline struct hlist_bl_node *hlist_bl_first(struct hlist_bl_head *h)
-{
-	return (struct hlist_bl_node *)
-		((unsigned long)h->first & ~LIST_BL_LOCKMASK);
-}
-
-static inline void hlist_bl_set_first(struct hlist_bl_head *h,
-					struct hlist_bl_node *n)
-{
-	LIST_BL_BUG_ON((unsigned long)n & LIST_BL_LOCKMASK);
-	LIST_BL_BUG_ON(((unsigned long)h->first & LIST_BL_LOCKMASK) !=
-							LIST_BL_LOCKMASK);
-	h->first = (struct hlist_bl_node *)((unsigned long)n | LIST_BL_LOCKMASK);
-}
-
-static inline int hlist_bl_empty(const struct hlist_bl_head *h)
-{
-	return !((unsigned long)h->first & ~LIST_BL_LOCKMASK);
-}
-
-static inline void hlist_bl_add_head(struct hlist_bl_node *n,
-					struct hlist_bl_head *h)
-{
-	struct hlist_bl_node *first = hlist_bl_first(h);
-
-	n->next = first;
-	if (first)
-		first->pprev = &n->next;
-	n->pprev = &h->first;
-	hlist_bl_set_first(h, n);
-}
-
-static inline void __hlist_bl_del(struct hlist_bl_node *n)
-{
-	struct hlist_bl_node *next = n->next;
-	struct hlist_bl_node **pprev = n->pprev;
-
-	LIST_BL_BUG_ON((unsigned long)n & LIST_BL_LOCKMASK);
-
-	/* pprev may be `first`, so be careful not to lose the lock bit */
-	*pprev = (struct hlist_bl_node *)
-			((unsigned long)next |
-			 ((unsigned long)*pprev & LIST_BL_LOCKMASK));
-	if (next)
-		next->pprev = pprev;
-}
-
-static inline void hlist_bl_del(struct hlist_bl_node *n)
-{
-	__hlist_bl_del(n);
-	n->next = LIST_POISON1;
-	n->pprev = LIST_POISON2;
-}
-
-static inline void hlist_bl_del_init(struct hlist_bl_node *n)
-{
-	if (!hlist_bl_unhashed(n)) {
-		__hlist_bl_del(n);
-		INIT_HLIST_BL_NODE(n);
-	}
-}
-
-static inline void hlist_bl_lock(struct hlist_bl_head *b)
-{
-	bit_spin_lock(0, (unsigned long *)b);
-}
-
-static inline void hlist_bl_unlock(struct hlist_bl_head *b)
-{
-	__bit_spin_unlock(0, (unsigned long *)b);
-}
-
-/**
- * hlist_bl_for_each_entry	- iterate over list of given type
- * @tpos:	the type * to use as a loop cursor.
- * @pos:	the &struct hlist_node to use as a loop cursor.
- * @head:	the head for your list.
- * @member:	the name of the hlist_node within the struct.
- *
- */
-#define hlist_bl_for_each_entry(tpos, pos, head, member)		\
-	for (pos = hlist_bl_first(head);				\
-	     pos &&							\
-		({ tpos = hlist_bl_entry(pos, typeof(*tpos), member); 1;}); \
-	     pos = pos->next)
-
-/**
- * hlist_bl_for_each_entry_safe - iterate over list of given type safe against removal of list entry
- * @tpos:	the type * to use as a loop cursor.
- * @pos:	the &struct hlist_node to use as a loop cursor.
- * @n:		another &struct hlist_node to use as temporary storage
- * @head:	the head for your list.
- * @member:	the name of the hlist_node within the struct.
- */
-#define hlist_bl_for_each_entry_safe(tpos, pos, n, head, member)	 \
-	for (pos = hlist_bl_first(head);				 \
-	     pos && ({ n = pos->next; 1; }) && 				 \
-		({ tpos = hlist_bl_entry(pos, typeof(*tpos), member); 1;}); \
-	     pos = n)
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/list_nulls.h b/ANDROID_3.4.5/include/linux/list_nulls.h
deleted file mode 100644
index 5d10ae36..00000000
--- a/ANDROID_3.4.5/include/linux/list_nulls.h
+++ /dev/null
@@ -1,112 +0,0 @@
-#ifndef _LINUX_LIST_NULLS_H
-#define _LINUX_LIST_NULLS_H
-
-/*
- * Special version of lists, where end of list is not a NULL pointer,
- * but a 'nulls' marker, which can have many different values.
- * (up to 2^31 different values guaranteed on all platforms)
- *
- * In the standard hlist, termination of a list is the NULL pointer.
- * In this special 'nulls' variant, we use the fact that objects stored in
- * a list are aligned on a word (4 or 8 bytes alignment).
- * We therefore use the last significant bit of 'ptr' :
- * Set to 1 : This is a 'nulls' end-of-list marker (ptr >> 1)
- * Set to 0 : This is a pointer to some object (ptr)
- */
-
-struct hlist_nulls_head {
-	struct hlist_nulls_node *first;
-};
-
-struct hlist_nulls_node {
-	struct hlist_nulls_node *next, **pprev;
-};
-#define INIT_HLIST_NULLS_HEAD(ptr, nulls) \
-	((ptr)->first = (struct hlist_nulls_node *) (1UL | (((long)nulls) << 1)))
-
-#define hlist_nulls_entry(ptr, type, member) container_of(ptr,type,member)
-/**
- * ptr_is_a_nulls - Test if a ptr is a nulls
- * @ptr: ptr to be tested
- *
- */
-static inline int is_a_nulls(const struct hlist_nulls_node *ptr)
-{
-	return ((unsigned long)ptr & 1);
-}
-
-/**
- * get_nulls_value - Get the 'nulls' value of the end of chain
- * @ptr: end of chain
- *
- * Should be called only if is_a_nulls(ptr);
- */
-static inline unsigned long get_nulls_value(const struct hlist_nulls_node *ptr)
-{
-	return ((unsigned long)ptr) >> 1;
-}
-
-static inline int hlist_nulls_unhashed(const struct hlist_nulls_node *h)
-{
-	return !h->pprev;
-}
-
-static inline int hlist_nulls_empty(const struct hlist_nulls_head *h)
-{
-	return is_a_nulls(h->first);
-}
-
-static inline void hlist_nulls_add_head(struct hlist_nulls_node *n,
-					struct hlist_nulls_head *h)
-{
-	struct hlist_nulls_node *first = h->first;
-
-	n->next = first;
-	n->pprev = &h->first;
-	h->first = n;
-	if (!is_a_nulls(first))
-		first->pprev = &n->next;
-}
-
-static inline void __hlist_nulls_del(struct hlist_nulls_node *n)
-{
-	struct hlist_nulls_node *next = n->next;
-	struct hlist_nulls_node **pprev = n->pprev;
-	*pprev = next;
-	if (!is_a_nulls(next))
-		next->pprev = pprev;
-}
-
-static inline void hlist_nulls_del(struct hlist_nulls_node *n)
-{
-	__hlist_nulls_del(n);
-	n->pprev = LIST_POISON2;
-}
-
-/**
- * hlist_nulls_for_each_entry	- iterate over list of given type
- * @tpos:	the type * to use as a loop cursor.
- * @pos:	the &struct hlist_node to use as a loop cursor.
- * @head:	the head for your list.
- * @member:	the name of the hlist_node within the struct.
- *
- */
-#define hlist_nulls_for_each_entry(tpos, pos, head, member)		       \
-	for (pos = (head)->first;					       \
-	     (!is_a_nulls(pos)) &&					       \
-		({ tpos = hlist_nulls_entry(pos, typeof(*tpos), member); 1;}); \
-	     pos = pos->next)
-
-/**
- * hlist_nulls_for_each_entry_from - iterate over a hlist continuing from current point
- * @tpos:	the type * to use as a loop cursor.
- * @pos:	the &struct hlist_node to use as a loop cursor.
- * @member:	the name of the hlist_node within the struct.
- *
- */
-#define hlist_nulls_for_each_entry_from(tpos, pos, member)	\
-	for (; (!is_a_nulls(pos)) && 				\
-		({ tpos = hlist_nulls_entry(pos, typeof(*tpos), member); 1;}); \
-	     pos = pos->next)
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/list_sort.h b/ANDROID_3.4.5/include/linux/list_sort.h
deleted file mode 100644
index 1a2df2ef..00000000
--- a/ANDROID_3.4.5/include/linux/list_sort.h
+++ /dev/null
@@ -1,11 +0,0 @@
-#ifndef _LINUX_LIST_SORT_H
-#define _LINUX_LIST_SORT_H
-
-#include <linux/types.h>
-
-struct list_head;
-
-void list_sort(void *priv, struct list_head *head,
-	       int (*cmp)(void *priv, struct list_head *a,
-			  struct list_head *b));
-#endif
diff --git a/ANDROID_3.4.5/include/linux/llc.h b/ANDROID_3.4.5/include/linux/llc.h
deleted file mode 100644
index a2418ae1..00000000
--- a/ANDROID_3.4.5/include/linux/llc.h
+++ /dev/null
@@ -1,91 +0,0 @@
-#ifndef __LINUX_LLC_H
-#define __LINUX_LLC_H
-/*
- * IEEE 802.2 User Interface SAPs for Linux, data structures and indicators.
- *
- * Copyright (c) 2001 by Jay Schulist <jschlst@samba.org>
- *
- * This program can be redistributed or modified under the terms of the
- * GNU General Public License as published by the Free Software Foundation.
- * This program is distributed without any warranty or implied warranty
- * of merchantability or fitness for a particular purpose.
- *
- * See the GNU General Public License for more details.
- */
-
-#include <linux/socket.h>
-
-#define __LLC_SOCK_SIZE__ 16	/* sizeof(sockaddr_llc), word align. */
-struct sockaddr_llc {
-	__kernel_sa_family_t sllc_family; /* AF_LLC */
-	__kernel_sa_family_t sllc_arphrd; /* ARPHRD_ETHER */
-	unsigned char   sllc_test;
-	unsigned char   sllc_xid;
-	unsigned char	sllc_ua;	/* UA data, only for SOCK_STREAM. */
-	unsigned char   sllc_sap;
-	unsigned char   sllc_mac[IFHWADDRLEN];
-	unsigned char   __pad[__LLC_SOCK_SIZE__ -
-			      sizeof(__kernel_sa_family_t) * 2 -
-			      sizeof(unsigned char) * 4 - IFHWADDRLEN];
-};
-
-/* sockopt definitions. */
-enum llc_sockopts {
-	LLC_OPT_UNKNOWN = 0,
-	LLC_OPT_RETRY,		/* max retrans attempts. */
-	LLC_OPT_SIZE,		/* max PDU size (octets). */
-	LLC_OPT_ACK_TMR_EXP,	/* ack expire time (secs). */
-	LLC_OPT_P_TMR_EXP,	/* pf cycle expire time (secs). */
-	LLC_OPT_REJ_TMR_EXP,	/* rej sent expire time (secs). */
-	LLC_OPT_BUSY_TMR_EXP,	/* busy state expire time (secs). */
-	LLC_OPT_TX_WIN,		/* tx window size. */
-	LLC_OPT_RX_WIN,		/* rx window size. */
-	LLC_OPT_PKTINFO,	/* ancillary packet information. */
-	LLC_OPT_MAX
-};
-
-#define LLC_OPT_MAX_RETRY	 100
-#define LLC_OPT_MAX_SIZE	4196
-#define LLC_OPT_MAX_WIN		 127
-#define LLC_OPT_MAX_ACK_TMR_EXP	  60
-#define LLC_OPT_MAX_P_TMR_EXP	  60
-#define LLC_OPT_MAX_REJ_TMR_EXP	  60
-#define LLC_OPT_MAX_BUSY_TMR_EXP  60
-
-/* LLC SAP types. */
-#define LLC_SAP_NULL	0x00		/* NULL SAP. 			*/
-#define LLC_SAP_LLC	0x02		/* LLC Sublayer Management. 	*/
-#define LLC_SAP_SNA	0x04		/* SNA Path Control. 		*/
-#define LLC_SAP_PNM	0x0E		/* Proway Network Management.	*/	
-#define LLC_SAP_IP	0x06		/* TCP/IP. 			*/
-#define LLC_SAP_BSPAN	0x42		/* Bridge Spanning Tree Proto	*/
-#define LLC_SAP_MMS	0x4E		/* Manufacturing Message Srv.	*/
-#define LLC_SAP_8208	0x7E		/* ISO 8208			*/
-#define LLC_SAP_3COM	0x80		/* 3COM. 			*/
-#define LLC_SAP_PRO	0x8E		/* Proway Active Station List	*/
-#define LLC_SAP_SNAP	0xAA		/* SNAP. 			*/
-#define LLC_SAP_BANYAN	0xBC		/* Banyan. 			*/
-#define LLC_SAP_IPX	0xE0		/* IPX/SPX. 			*/
-#define LLC_SAP_NETBEUI	0xF0		/* NetBEUI. 			*/
-#define LLC_SAP_LANMGR	0xF4		/* LanManager. 			*/
-#define LLC_SAP_IMPL	0xF8		/* IMPL				*/
-#define LLC_SAP_DISC	0xFC		/* Discovery			*/
-#define LLC_SAP_OSI	0xFE		/* OSI Network Layers. 		*/
-#define LLC_SAP_LAR	0xDC		/* LAN Address Resolution 	*/
-#define LLC_SAP_RM	0xD4		/* Resource Management 		*/
-#define LLC_SAP_GLOBAL	0xFF		/* Global SAP. 			*/
-
-struct llc_pktinfo {
-	int lpi_ifindex;
-	unsigned char lpi_sap;
-	unsigned char lpi_mac[IFHWADDRLEN];
-};
-
-#ifdef __KERNEL__
-#define LLC_SAP_DYN_START	0xC0
-#define LLC_SAP_DYN_STOP	0xDE
-#define LLC_SAP_DYN_TRIES	4
-
-#define llc_ui_skb_cb(__skb) ((struct sockaddr_llc *)&((__skb)->cb[0]))
-#endif /* __KERNEL__ */
-#endif /* __LINUX_LLC_H */
diff --git a/ANDROID_3.4.5/include/linux/llist.h b/ANDROID_3.4.5/include/linux/llist.h
deleted file mode 100644
index a5199f6d..00000000
--- a/ANDROID_3.4.5/include/linux/llist.h
+++ /dev/null
@@ -1,186 +0,0 @@
-#ifndef LLIST_H
-#define LLIST_H
-/*
- * Lock-less NULL terminated single linked list
- *
- * If there are multiple producers and multiple consumers, llist_add
- * can be used in producers and llist_del_all can be used in
- * consumers.  They can work simultaneously without lock.  But
- * llist_del_first can not be used here.  Because llist_del_first
- * depends on list->first->next does not changed if list->first is not
- * changed during its operation, but llist_del_first, llist_add,
- * llist_add (or llist_del_all, llist_add, llist_add) sequence in
- * another consumer may violate that.
- *
- * If there are multiple producers and one consumer, llist_add can be
- * used in producers and llist_del_all or llist_del_first can be used
- * in the consumer.
- *
- * This can be summarized as follow:
- *
- *           |   add    | del_first |  del_all
- * add       |    -     |     -     |     -
- * del_first |          |     L     |     L
- * del_all   |          |           |     -
- *
- * Where "-" stands for no lock is needed, while "L" stands for lock
- * is needed.
- *
- * The list entries deleted via llist_del_all can be traversed with
- * traversing function such as llist_for_each etc.  But the list
- * entries can not be traversed safely before deleted from the list.
- * The order of deleted entries is from the newest to the oldest added
- * one.  If you want to traverse from the oldest to the newest, you
- * must reverse the order by yourself before traversing.
- *
- * The basic atomic operation of this list is cmpxchg on long.  On
- * architectures that don't have NMI-safe cmpxchg implementation, the
- * list can NOT be used in NMI handlers.  So code that uses the list in
- * an NMI handler should depend on CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG.
- *
- * Copyright 2010,2011 Intel Corp.
- *   Author: Huang Ying <ying.huang@intel.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version
- * 2 as published by the Free Software Foundation;
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/kernel.h>
-#include <asm/cmpxchg.h>
-
-struct llist_head {
-	struct llist_node *first;
-};
-
-struct llist_node {
-	struct llist_node *next;
-};
-
-#define LLIST_HEAD_INIT(name)	{ NULL }
-#define LLIST_HEAD(name)	struct llist_head name = LLIST_HEAD_INIT(name)
-
-/**
- * init_llist_head - initialize lock-less list head
- * @head:	the head for your lock-less list
- */
-static inline void init_llist_head(struct llist_head *list)
-{
-	list->first = NULL;
-}
-
-/**
- * llist_entry - get the struct of this entry
- * @ptr:	the &struct llist_node pointer.
- * @type:	the type of the struct this is embedded in.
- * @member:	the name of the llist_node within the struct.
- */
-#define llist_entry(ptr, type, member)		\
-	container_of(ptr, type, member)
-
-/**
- * llist_for_each - iterate over some deleted entries of a lock-less list
- * @pos:	the &struct llist_node to use as a loop cursor
- * @node:	the first entry of deleted list entries
- *
- * In general, some entries of the lock-less list can be traversed
- * safely only after being deleted from list, so start with an entry
- * instead of list head.
- *
- * If being used on entries deleted from lock-less list directly, the
- * traverse order is from the newest to the oldest added entry.  If
- * you want to traverse from the oldest to the newest, you must
- * reverse the order by yourself before traversing.
- */
-#define llist_for_each(pos, node)			\
-	for ((pos) = (node); pos; (pos) = (pos)->next)
-
-/**
- * llist_for_each_entry - iterate over some deleted entries of lock-less list of given type
- * @pos:	the type * to use as a loop cursor.
- * @node:	the fist entry of deleted list entries.
- * @member:	the name of the llist_node with the struct.
- *
- * In general, some entries of the lock-less list can be traversed
- * safely only after being removed from list, so start with an entry
- * instead of list head.
- *
- * If being used on entries deleted from lock-less list directly, the
- * traverse order is from the newest to the oldest added entry.  If
- * you want to traverse from the oldest to the newest, you must
- * reverse the order by yourself before traversing.
- */
-#define llist_for_each_entry(pos, node, member)				\
-	for ((pos) = llist_entry((node), typeof(*(pos)), member);	\
-	     &(pos)->member != NULL;					\
-	     (pos) = llist_entry((pos)->member.next, typeof(*(pos)), member))
-
-/**
- * llist_empty - tests whether a lock-less list is empty
- * @head:	the list to test
- *
- * Not guaranteed to be accurate or up to date.  Just a quick way to
- * test whether the list is empty without deleting something from the
- * list.
- */
-static inline bool llist_empty(const struct llist_head *head)
-{
-	return ACCESS_ONCE(head->first) == NULL;
-}
-
-static inline struct llist_node *llist_next(struct llist_node *node)
-{
-	return node->next;
-}
-
-/**
- * llist_add - add a new entry
- * @new:	new entry to be added
- * @head:	the head for your lock-less list
- *
- * Returns true if the list was empty prior to adding this entry.
- */
-static inline bool llist_add(struct llist_node *new, struct llist_head *head)
-{
-	struct llist_node *entry, *old_entry;
-
-	entry = head->first;
-	for (;;) {
-		old_entry = entry;
-		new->next = entry;
-		entry = cmpxchg(&head->first, old_entry, new);
-		if (entry == old_entry)
-			break;
-	}
-
-	return old_entry == NULL;
-}
-
-/**
- * llist_del_all - delete all entries from lock-less list
- * @head:	the head of lock-less list to delete all entries
- *
- * If list is empty, return NULL, otherwise, delete all entries and
- * return the pointer to the first entry.  The order of entries
- * deleted is from the newest to the oldest added one.
- */
-static inline struct llist_node *llist_del_all(struct llist_head *head)
-{
-	return xchg(&head->first, NULL);
-}
-
-extern bool llist_add_batch(struct llist_node *new_first,
-			    struct llist_node *new_last,
-			    struct llist_head *head);
-extern struct llist_node *llist_del_first(struct llist_head *head);
-
-#endif /* LLIST_H */
diff --git a/ANDROID_3.4.5/include/linux/lockd/bind.h b/ANDROID_3.4.5/include/linux/lockd/bind.h
deleted file mode 100644
index 4d24d645..00000000
--- a/ANDROID_3.4.5/include/linux/lockd/bind.h
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
- * linux/include/linux/lockd/bind.h
- *
- * This is the part of lockd visible to nfsd and the nfs client.
- *
- * Copyright (C) 1996, Olaf Kirch <okir@monad.swb.de>
- */
-
-#ifndef LINUX_LOCKD_BIND_H
-#define LINUX_LOCKD_BIND_H
-
-#include <linux/lockd/nlm.h>
-/* need xdr-encoded error codes too, so... */
-#include <linux/lockd/xdr.h>
-#ifdef CONFIG_LOCKD_V4
-#include <linux/lockd/xdr4.h>
-#endif
-
-/* Dummy declarations */
-struct svc_rqst;
-
-/*
- * This is the set of functions for lockd->nfsd communication
- */
-struct nlmsvc_binding {
-	__be32			(*fopen)(struct svc_rqst *,
-						struct nfs_fh *,
-						struct file **);
-	void			(*fclose)(struct file *);
-};
-
-extern struct nlmsvc_binding *	nlmsvc_ops;
-
-/*
- * Similar to nfs_client_initdata, but without the NFS-specific
- * rpc_ops field.
- */
-struct nlmclnt_initdata {
-	const char		*hostname;
-	const struct sockaddr	*address;
-	size_t			addrlen;
-	unsigned short		protocol;
-	u32			nfs_version;
-	int			noresvport;
-	struct net		*net;
-};
-
-/*
- * Functions exported by the lockd module
- */
-
-extern struct nlm_host *nlmclnt_init(const struct nlmclnt_initdata *nlm_init);
-extern void	nlmclnt_done(struct nlm_host *host);
-
-extern int	nlmclnt_proc(struct nlm_host *host, int cmd,
-					struct file_lock *fl);
-extern int	lockd_up(struct net *net);
-extern void	lockd_down(struct net *net);
-
-#endif /* LINUX_LOCKD_BIND_H */
diff --git a/ANDROID_3.4.5/include/linux/lockd/debug.h b/ANDROID_3.4.5/include/linux/lockd/debug.h
deleted file mode 100644
index 257d3779..00000000
--- a/ANDROID_3.4.5/include/linux/lockd/debug.h
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- * linux/include/linux/lockd/debug.h
- *
- * Debugging stuff.
- *
- * Copyright (C) 1996 Olaf Kirch <okir@monad.swb.de>
- */
-
-#ifndef LINUX_LOCKD_DEBUG_H
-#define LINUX_LOCKD_DEBUG_H
-
-#ifdef __KERNEL__
-
-#include <linux/sunrpc/debug.h>
-
-/*
- * Enable lockd debugging.
- * Requires RPC_DEBUG.
- */
-#ifdef RPC_DEBUG
-# define LOCKD_DEBUG		1
-#endif
-
-#undef ifdebug
-#if defined(RPC_DEBUG) && defined(LOCKD_DEBUG)
-# define ifdebug(flag)		if (unlikely(nlm_debug & NLMDBG_##flag))
-#else
-# define ifdebug(flag)		if (0)
-#endif
-
-#endif /* __KERNEL__ */
-
-/*
- * Debug flags
- */
-#define NLMDBG_SVC		0x0001
-#define NLMDBG_CLIENT		0x0002
-#define NLMDBG_CLNTLOCK		0x0004
-#define NLMDBG_SVCLOCK		0x0008
-#define NLMDBG_MONITOR		0x0010
-#define NLMDBG_CLNTSUBS		0x0020
-#define NLMDBG_SVCSUBS		0x0040
-#define NLMDBG_HOSTCACHE	0x0080
-#define NLMDBG_XDR		0x0100
-#define NLMDBG_ALL		0x7fff
-
-#endif /* LINUX_LOCKD_DEBUG_H */
diff --git a/ANDROID_3.4.5/include/linux/lockd/lockd.h b/ANDROID_3.4.5/include/linux/lockd/lockd.h
deleted file mode 100644
index f04ce6ac..00000000
--- a/ANDROID_3.4.5/include/linux/lockd/lockd.h
+++ /dev/null
@@ -1,365 +0,0 @@
-/*
- * linux/include/linux/lockd/lockd.h
- *
- * General-purpose lockd include file.
- *
- * Copyright (C) 1996 Olaf Kirch <okir@monad.swb.de>
- */
-
-#ifndef LINUX_LOCKD_LOCKD_H
-#define LINUX_LOCKD_LOCKD_H
-
-#ifdef __KERNEL__
-
-#include <linux/in.h>
-#include <linux/in6.h>
-#include <net/ipv6.h>
-#include <linux/fs.h>
-#include <linux/kref.h>
-#include <linux/utsname.h>
-#include <linux/nfsd/nfsfh.h>
-#include <linux/lockd/bind.h>
-#include <linux/lockd/xdr.h>
-#ifdef CONFIG_LOCKD_V4
-#include <linux/lockd/xdr4.h>
-#endif
-#include <linux/lockd/debug.h>
-
-/*
- * Version string
- */
-#define LOCKD_VERSION		"0.5"
-
-/*
- * Default timeout for RPC calls (seconds)
- */
-#define LOCKD_DFLT_TIMEO	10
-
-/*
- * Lockd host handle (used both by the client and server personality).
- */
-struct nlm_host {
-	struct hlist_node	h_hash;		/* doubly linked list */
-	struct sockaddr_storage	h_addr;		/* peer address */
-	size_t			h_addrlen;
-	struct sockaddr_storage	h_srcaddr;	/* our address (optional) */
-	size_t			h_srcaddrlen;
-	struct rpc_clnt		*h_rpcclnt;	/* RPC client to talk to peer */
-	char			*h_name;		/* remote hostname */
-	u32			h_version;	/* interface version */
-	unsigned short		h_proto;	/* transport proto */
-	unsigned short		h_reclaiming : 1,
-				h_server     : 1, /* server side, not client side */
-				h_noresvport : 1,
-				h_inuse      : 1;
-	wait_queue_head_t	h_gracewait;	/* wait while reclaiming */
-	struct rw_semaphore	h_rwsem;	/* Reboot recovery lock */
-	u32			h_state;	/* pseudo-state counter */
-	u32			h_nsmstate;	/* true remote NSM state */
-	u32			h_pidcount;	/* Pseudopids */
-	atomic_t		h_count;	/* reference count */
-	struct mutex		h_mutex;	/* mutex for pmap binding */
-	unsigned long		h_nextrebind;	/* next portmap call */
-	unsigned long		h_expires;	/* eligible for GC */
-	struct list_head	h_lockowners;	/* Lockowners for the client */
-	spinlock_t		h_lock;
-	struct list_head	h_granted;	/* Locks in GRANTED state */
-	struct list_head	h_reclaim;	/* Locks in RECLAIM state */
-	struct nsm_handle	*h_nsmhandle;	/* NSM status handle */
-	char			*h_addrbuf;	/* address eyecatcher */
-	struct net		*net;		/* host net */
-};
-
-/*
- * The largest string sm_addrbuf should hold is a full-size IPv6 address
- * (no "::" anywhere) with a scope ID.  The buffer size is computed to
- * hold eight groups of colon-separated four-hex-digit numbers, a
- * percent sign, a scope id (at most 32 bits, in decimal), and NUL.
- */
-#define NSM_ADDRBUF		((8 * 4 + 7) + (1 + 10) + 1)
-
-struct nsm_handle {
-	struct list_head	sm_link;
-	atomic_t		sm_count;
-	char			*sm_mon_name;
-	char			*sm_name;
-	struct sockaddr_storage	sm_addr;
-	size_t			sm_addrlen;
-	unsigned int		sm_monitored : 1,
-				sm_sticky : 1;	/* don't unmonitor */
-	struct nsm_private	sm_priv;
-	char			sm_addrbuf[NSM_ADDRBUF];
-};
-
-/*
- * Rigorous type checking on sockaddr type conversions
- */
-static inline struct sockaddr_in *nlm_addr_in(const struct nlm_host *host)
-{
-	return (struct sockaddr_in *)&host->h_addr;
-}
-
-static inline struct sockaddr *nlm_addr(const struct nlm_host *host)
-{
-	return (struct sockaddr *)&host->h_addr;
-}
-
-static inline struct sockaddr_in *nlm_srcaddr_in(const struct nlm_host *host)
-{
-	return (struct sockaddr_in *)&host->h_srcaddr;
-}
-
-static inline struct sockaddr *nlm_srcaddr(const struct nlm_host *host)
-{
-	return (struct sockaddr *)&host->h_srcaddr;
-}
-
-/*
- * Map an fl_owner_t into a unique 32-bit "pid"
- */
-struct nlm_lockowner {
-	struct list_head list;
-	atomic_t count;
-
-	struct nlm_host *host;
-	fl_owner_t owner;
-	uint32_t pid;
-};
-
-struct nlm_wait;
-
-/*
- * Memory chunk for NLM client RPC request.
- */
-#define NLMCLNT_OHSIZE		((__NEW_UTS_LEN) + 10u)
-struct nlm_rqst {
-	atomic_t		a_count;
-	unsigned int		a_flags;	/* initial RPC task flags */
-	struct nlm_host *	a_host;		/* host handle */
-	struct nlm_args		a_args;		/* arguments */
-	struct nlm_res		a_res;		/* result */
-	struct nlm_block *	a_block;
-	unsigned int		a_retries;	/* Retry count */
-	u8			a_owner[NLMCLNT_OHSIZE];
-};
-
-/*
- * This struct describes a file held open by lockd on behalf of
- * an NFS client.
- */
-struct nlm_file {
-	struct hlist_node	f_list;		/* linked list */
-	struct nfs_fh		f_handle;	/* NFS file handle */
-	struct file *		f_file;		/* VFS file pointer */
-	struct nlm_share *	f_shares;	/* DOS shares */
-	struct list_head	f_blocks;	/* blocked locks */
-	unsigned int		f_locks;	/* guesstimate # of locks */
-	unsigned int		f_count;	/* reference count */
-	struct mutex		f_mutex;	/* avoid concurrent access */
-};
-
-/*
- * This is a server block (i.e. a lock requested by some client which
- * couldn't be granted because of a conflicting lock).
- */
-#define NLM_NEVER		(~(unsigned long) 0)
-/* timeout on non-blocking call: */
-#define NLM_TIMEOUT		(7 * HZ)
-
-struct nlm_block {
-	struct kref		b_count;	/* Reference count */
-	struct list_head	b_list;		/* linked list of all blocks */
-	struct list_head	b_flist;	/* linked list (per file) */
-	struct nlm_rqst	*	b_call;		/* RPC args & callback info */
-	struct svc_serv *	b_daemon;	/* NLM service */
-	struct nlm_host *	b_host;		/* host handle for RPC clnt */
-	unsigned long		b_when;		/* next re-xmit */
-	unsigned int		b_id;		/* block id */
-	unsigned char		b_granted;	/* VFS granted lock */
-	struct nlm_file *	b_file;		/* file in question */
-	struct cache_req *	b_cache_req;	/* deferred request handling */
-	struct file_lock *	b_fl;		/* set for GETLK */
-	struct cache_deferred_req * b_deferred_req;
-	unsigned int		b_flags;	/* block flags */
-#define B_QUEUED		1	/* lock queued */
-#define B_GOT_CALLBACK		2	/* got lock or conflicting lock */
-#define B_TIMED_OUT		4	/* filesystem too slow to respond */
-};
-
-/*
- * Global variables
- */
-extern const struct rpc_program	nlm_program;
-extern struct svc_procedure	nlmsvc_procedures[];
-#ifdef CONFIG_LOCKD_V4
-extern struct svc_procedure	nlmsvc_procedures4[];
-#endif
-extern int			nlmsvc_grace_period;
-extern unsigned long		nlmsvc_timeout;
-extern bool			nsm_use_hostnames;
-extern u32			nsm_local_state;
-
-/*
- * Lockd client functions
- */
-struct nlm_rqst * nlm_alloc_call(struct nlm_host *host);
-int		  nlm_async_call(struct nlm_rqst *, u32, const struct rpc_call_ops *);
-int		  nlm_async_reply(struct nlm_rqst *, u32, const struct rpc_call_ops *);
-void		  nlmclnt_release_call(struct nlm_rqst *);
-struct nlm_wait * nlmclnt_prepare_block(struct nlm_host *host, struct file_lock *fl);
-void		  nlmclnt_finish_block(struct nlm_wait *block);
-int		  nlmclnt_block(struct nlm_wait *block, struct nlm_rqst *req, long timeout);
-__be32		  nlmclnt_grant(const struct sockaddr *addr,
-				const struct nlm_lock *lock);
-void		  nlmclnt_recovery(struct nlm_host *);
-int		  nlmclnt_reclaim(struct nlm_host *, struct file_lock *);
-void		  nlmclnt_next_cookie(struct nlm_cookie *);
-
-/*
- * Host cache
- */
-struct nlm_host  *nlmclnt_lookup_host(const struct sockaddr *sap,
-					const size_t salen,
-					const unsigned short protocol,
-					const u32 version,
-					const char *hostname,
-					int noresvport,
-					struct net *net);
-void		  nlmclnt_release_host(struct nlm_host *);
-struct nlm_host  *nlmsvc_lookup_host(const struct svc_rqst *rqstp,
-					const char *hostname,
-					const size_t hostname_len);
-void		  nlmsvc_release_host(struct nlm_host *);
-struct rpc_clnt * nlm_bind_host(struct nlm_host *);
-void		  nlm_rebind_host(struct nlm_host *);
-struct nlm_host * nlm_get_host(struct nlm_host *);
-void		  nlm_shutdown_hosts(void);
-void		  nlm_shutdown_hosts_net(struct net *net);
-void		  nlm_host_rebooted(const struct nlm_reboot *);
-
-/*
- * Host monitoring
- */
-int		  nsm_monitor(const struct nlm_host *host);
-void		  nsm_unmonitor(const struct nlm_host *host);
-
-struct nsm_handle *nsm_get_handle(const struct sockaddr *sap,
-					const size_t salen,
-					const char *hostname,
-					const size_t hostname_len);
-struct nsm_handle *nsm_reboot_lookup(const struct nlm_reboot *info);
-void		  nsm_release(struct nsm_handle *nsm);
-
-/*
- * This is used in garbage collection and resource reclaim
- * A return value != 0 means destroy the lock/block/share
- */
-typedef int	  (*nlm_host_match_fn_t)(void *cur, struct nlm_host *ref);
-
-/*
- * Server-side lock handling
- */
-__be32		  nlmsvc_lock(struct svc_rqst *, struct nlm_file *,
-			      struct nlm_host *, struct nlm_lock *, int,
-			      struct nlm_cookie *, int);
-__be32		  nlmsvc_unlock(struct nlm_file *, struct nlm_lock *);
-__be32		  nlmsvc_testlock(struct svc_rqst *, struct nlm_file *,
-			struct nlm_host *, struct nlm_lock *,
-			struct nlm_lock *, struct nlm_cookie *);
-__be32		  nlmsvc_cancel_blocked(struct nlm_file *, struct nlm_lock *);
-unsigned long	  nlmsvc_retry_blocked(void);
-void		  nlmsvc_traverse_blocks(struct nlm_host *, struct nlm_file *,
-					nlm_host_match_fn_t match);
-void		  nlmsvc_grant_reply(struct nlm_cookie *, __be32);
-void		  nlmsvc_release_call(struct nlm_rqst *);
-
-/*
- * File handling for the server personality
- */
-__be32		  nlm_lookup_file(struct svc_rqst *, struct nlm_file **,
-					struct nfs_fh *);
-void		  nlm_release_file(struct nlm_file *);
-void		  nlmsvc_mark_resources(void);
-void		  nlmsvc_free_host_resources(struct nlm_host *);
-void		  nlmsvc_invalidate_all(void);
-
-/*
- * Cluster failover support
- */
-int           nlmsvc_unlock_all_by_sb(struct super_block *sb);
-int           nlmsvc_unlock_all_by_ip(struct sockaddr *server_addr);
-
-static inline struct inode *nlmsvc_file_inode(struct nlm_file *file)
-{
-	return file->f_file->f_path.dentry->d_inode;
-}
-
-static inline int __nlm_privileged_request4(const struct sockaddr *sap)
-{
-	const struct sockaddr_in *sin = (struct sockaddr_in *)sap;
-
-	if (ntohs(sin->sin_port) > 1023)
-		return 0;
-
-	return ipv4_is_loopback(sin->sin_addr.s_addr);
-}
-
-#if IS_ENABLED(CONFIG_IPV6)
-static inline int __nlm_privileged_request6(const struct sockaddr *sap)
-{
-	const struct sockaddr_in6 *sin6 = (struct sockaddr_in6 *)sap;
-
-	if (ntohs(sin6->sin6_port) > 1023)
-		return 0;
-
-	if (ipv6_addr_type(&sin6->sin6_addr) & IPV6_ADDR_MAPPED)
-		return ipv4_is_loopback(sin6->sin6_addr.s6_addr32[3]);
-
-	return ipv6_addr_type(&sin6->sin6_addr) & IPV6_ADDR_LOOPBACK;
-}
-#else	/* IS_ENABLED(CONFIG_IPV6) */
-static inline int __nlm_privileged_request6(const struct sockaddr *sap)
-{
-	return 0;
-}
-#endif	/* IS_ENABLED(CONFIG_IPV6) */
-
-/*
- * Ensure incoming requests are from local privileged callers.
- *
- * Return TRUE if sender is local and is connecting via a privileged port;
- * otherwise return FALSE.
- */
-static inline int nlm_privileged_requester(const struct svc_rqst *rqstp)
-{
-	const struct sockaddr *sap = svc_addr(rqstp);
-
-	switch (sap->sa_family) {
-	case AF_INET:
-		return __nlm_privileged_request4(sap);
-	case AF_INET6:
-		return __nlm_privileged_request6(sap);
-	default:
-		return 0;
-	}
-}
-
-/*
- * Compare two NLM locks.
- * When the second lock is of type F_UNLCK, this acts like a wildcard.
- */
-static inline int nlm_compare_locks(const struct file_lock *fl1,
-				    const struct file_lock *fl2)
-{
-	return	fl1->fl_pid   == fl2->fl_pid
-	     && fl1->fl_owner == fl2->fl_owner
-	     && fl1->fl_start == fl2->fl_start
-	     && fl1->fl_end   == fl2->fl_end
-	     &&(fl1->fl_type  == fl2->fl_type || fl2->fl_type == F_UNLCK);
-}
-
-extern const struct lock_manager_operations nlmsvc_lock_operations;
-
-#endif /* __KERNEL__ */
-
-#endif /* LINUX_LOCKD_LOCKD_H */
diff --git a/ANDROID_3.4.5/include/linux/lockd/nlm.h b/ANDROID_3.4.5/include/linux/lockd/nlm.h
deleted file mode 100644
index d9d46e44..00000000
--- a/ANDROID_3.4.5/include/linux/lockd/nlm.h
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- * linux/include/linux/lockd/nlm.h
- *
- * Declarations for the Network Lock Manager protocol.
- *
- * Copyright (C) 1996, Olaf Kirch <okir@monad.swb.de>
- */
-
-#ifndef LINUX_LOCKD_NLM_H
-#define LINUX_LOCKD_NLM_H
-
-
-/* Maximum file offset in file_lock.fl_end */
-# define NLM_OFFSET_MAX		((s32) 0x7fffffff)
-# define NLM4_OFFSET_MAX	((s64) ((~(u64)0) >> 1))
-
-/* Return states for NLM */
-enum {
-	NLM_LCK_GRANTED			= 0,
-	NLM_LCK_DENIED			= 1,
-	NLM_LCK_DENIED_NOLOCKS		= 2,
-	NLM_LCK_BLOCKED			= 3,
-	NLM_LCK_DENIED_GRACE_PERIOD	= 4,
-#ifdef CONFIG_LOCKD_V4
-	NLM_DEADLCK			= 5,
-	NLM_ROFS			= 6,
-	NLM_STALE_FH			= 7,
-	NLM_FBIG			= 8,
-	NLM_FAILED			= 9,
-#endif
-};
-
-#define NLM_PROGRAM		100021
-
-#define NLMPROC_NULL		0
-#define NLMPROC_TEST		1
-#define NLMPROC_LOCK		2
-#define NLMPROC_CANCEL		3
-#define NLMPROC_UNLOCK		4
-#define NLMPROC_GRANTED		5
-#define NLMPROC_TEST_MSG	6
-#define NLMPROC_LOCK_MSG	7
-#define NLMPROC_CANCEL_MSG	8
-#define NLMPROC_UNLOCK_MSG	9
-#define NLMPROC_GRANTED_MSG	10
-#define NLMPROC_TEST_RES	11
-#define NLMPROC_LOCK_RES	12
-#define NLMPROC_CANCEL_RES	13
-#define NLMPROC_UNLOCK_RES	14
-#define NLMPROC_GRANTED_RES	15
-#define NLMPROC_NSM_NOTIFY	16		/* statd callback */
-#define NLMPROC_SHARE		20
-#define NLMPROC_UNSHARE		21
-#define NLMPROC_NM_LOCK		22
-#define NLMPROC_FREE_ALL	23
-
-#endif /* LINUX_LOCKD_NLM_H */
diff --git a/ANDROID_3.4.5/include/linux/lockd/share.h b/ANDROID_3.4.5/include/linux/lockd/share.h
deleted file mode 100644
index 630c5bf6..00000000
--- a/ANDROID_3.4.5/include/linux/lockd/share.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/*
- * linux/include/linux/lockd/share.h
- *
- * DOS share management for lockd.
- *
- * Copyright (C) 1996, Olaf Kirch <okir@monad.swb.de>
- */
-
-#ifndef LINUX_LOCKD_SHARE_H
-#define LINUX_LOCKD_SHARE_H
-
-/*
- * DOS share for a specific file
- */
-struct nlm_share {
-	struct nlm_share *	s_next;		/* linked list */
-	struct nlm_host *	s_host;		/* client host */
-	struct nlm_file *	s_file;		/* shared file */
-	struct xdr_netobj	s_owner;	/* owner handle */
-	u32			s_access;	/* access mode */
-	u32			s_mode;		/* deny mode */
-};
-
-__be32	nlmsvc_share_file(struct nlm_host *, struct nlm_file *,
-					       struct nlm_args *);
-__be32	nlmsvc_unshare_file(struct nlm_host *, struct nlm_file *,
-					       struct nlm_args *);
-void	nlmsvc_traverse_shares(struct nlm_host *, struct nlm_file *,
-					       nlm_host_match_fn_t);
-
-#endif /* LINUX_LOCKD_SHARE_H */
diff --git a/ANDROID_3.4.5/include/linux/lockd/xdr.h b/ANDROID_3.4.5/include/linux/lockd/xdr.h
deleted file mode 100644
index d39ed1cc..00000000
--- a/ANDROID_3.4.5/include/linux/lockd/xdr.h
+++ /dev/null
@@ -1,118 +0,0 @@
-/*
- * linux/include/linux/lockd/xdr.h
- *
- * XDR types for the NLM protocol
- *
- * Copyright (C) 1996 Olaf Kirch <okir@monad.swb.de>
- */
-
-#ifndef LOCKD_XDR_H
-#define LOCKD_XDR_H
-
-#include <linux/fs.h>
-#include <linux/nfs.h>
-#include <linux/sunrpc/xdr.h>
-
-#define SM_MAXSTRLEN		1024
-#define SM_PRIV_SIZE		16
-
-struct nsm_private {
-	unsigned char		data[SM_PRIV_SIZE];
-};
-
-struct svc_rqst;
-
-#define NLM_MAXCOOKIELEN    	32
-#define NLM_MAXSTRLEN		1024
-
-#define	nlm_granted		cpu_to_be32(NLM_LCK_GRANTED)
-#define	nlm_lck_denied		cpu_to_be32(NLM_LCK_DENIED)
-#define	nlm_lck_denied_nolocks	cpu_to_be32(NLM_LCK_DENIED_NOLOCKS)
-#define	nlm_lck_blocked		cpu_to_be32(NLM_LCK_BLOCKED)
-#define	nlm_lck_denied_grace_period	cpu_to_be32(NLM_LCK_DENIED_GRACE_PERIOD)
-
-#define nlm_drop_reply		cpu_to_be32(30000)
-
-/* Lock info passed via NLM */
-struct nlm_lock {
-	char *			caller;
-	unsigned int		len; 	/* length of "caller" */
-	struct nfs_fh		fh;
-	struct xdr_netobj	oh;
-	u32			svid;
-	struct file_lock	fl;
-};
-
-/*
- *	NLM cookies. Technically they can be 1K, but Linux only uses 8 bytes.
- *	FreeBSD uses 16, Apple Mac OS X 10.3 uses 20. Therefore we set it to
- *	32 bytes.
- */
- 
-struct nlm_cookie
-{
-	unsigned char data[NLM_MAXCOOKIELEN];
-	unsigned int len;
-};
-
-/*
- * Generic lockd arguments for all but sm_notify
- */
-struct nlm_args {
-	struct nlm_cookie	cookie;
-	struct nlm_lock		lock;
-	u32			block;
-	u32			reclaim;
-	u32			state;
-	u32			monitor;
-	u32			fsm_access;
-	u32			fsm_mode;
-};
-
-typedef struct nlm_args nlm_args;
-
-/*
- * Generic lockd result
- */
-struct nlm_res {
-	struct nlm_cookie	cookie;
-	__be32			status;
-	struct nlm_lock		lock;
-};
-
-/*
- * statd callback when client has rebooted
- */
-struct nlm_reboot {
-	char			*mon;
-	unsigned int		len;
-	u32			state;
-	struct nsm_private	priv;
-};
-
-/*
- * Contents of statd callback when monitored host rebooted
- */
-#define NLMSVC_XDRSIZE		sizeof(struct nlm_args)
-
-int	nlmsvc_decode_testargs(struct svc_rqst *, __be32 *, struct nlm_args *);
-int	nlmsvc_encode_testres(struct svc_rqst *, __be32 *, struct nlm_res *);
-int	nlmsvc_decode_lockargs(struct svc_rqst *, __be32 *, struct nlm_args *);
-int	nlmsvc_decode_cancargs(struct svc_rqst *, __be32 *, struct nlm_args *);
-int	nlmsvc_decode_unlockargs(struct svc_rqst *, __be32 *, struct nlm_args *);
-int	nlmsvc_encode_res(struct svc_rqst *, __be32 *, struct nlm_res *);
-int	nlmsvc_decode_res(struct svc_rqst *, __be32 *, struct nlm_res *);
-int	nlmsvc_encode_void(struct svc_rqst *, __be32 *, void *);
-int	nlmsvc_decode_void(struct svc_rqst *, __be32 *, void *);
-int	nlmsvc_decode_shareargs(struct svc_rqst *, __be32 *, struct nlm_args *);
-int	nlmsvc_encode_shareres(struct svc_rqst *, __be32 *, struct nlm_res *);
-int	nlmsvc_decode_notify(struct svc_rqst *, __be32 *, struct nlm_args *);
-int	nlmsvc_decode_reboot(struct svc_rqst *, __be32 *, struct nlm_reboot *);
-/*
-int	nlmclt_encode_testargs(struct rpc_rqst *, u32 *, struct nlm_args *);
-int	nlmclt_encode_lockargs(struct rpc_rqst *, u32 *, struct nlm_args *);
-int	nlmclt_encode_cancargs(struct rpc_rqst *, u32 *, struct nlm_args *);
-int	nlmclt_encode_unlockargs(struct rpc_rqst *, u32 *, struct nlm_args *);
- */
-
-#endif /* LOCKD_XDR_H */
diff --git a/ANDROID_3.4.5/include/linux/lockd/xdr4.h b/ANDROID_3.4.5/include/linux/lockd/xdr4.h
deleted file mode 100644
index e58c88b5..00000000
--- a/ANDROID_3.4.5/include/linux/lockd/xdr4.h
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- * linux/include/linux/lockd/xdr4.h
- *
- * XDR types for the NLM protocol
- *
- * Copyright (C) 1996 Olaf Kirch <okir@monad.swb.de>
- */
-
-#ifndef LOCKD_XDR4_H
-#define LOCKD_XDR4_H
-
-#include <linux/fs.h>
-#include <linux/nfs.h>
-#include <linux/sunrpc/xdr.h>
-#include <linux/lockd/xdr.h>
-
-/* error codes new to NLMv4 */
-#define	nlm4_deadlock		cpu_to_be32(NLM_DEADLCK)
-#define	nlm4_rofs		cpu_to_be32(NLM_ROFS)
-#define	nlm4_stale_fh		cpu_to_be32(NLM_STALE_FH)
-#define	nlm4_fbig		cpu_to_be32(NLM_FBIG)
-#define	nlm4_failed		cpu_to_be32(NLM_FAILED)
-
-
-
-int	nlm4svc_decode_testargs(struct svc_rqst *, __be32 *, struct nlm_args *);
-int	nlm4svc_encode_testres(struct svc_rqst *, __be32 *, struct nlm_res *);
-int	nlm4svc_decode_lockargs(struct svc_rqst *, __be32 *, struct nlm_args *);
-int	nlm4svc_decode_cancargs(struct svc_rqst *, __be32 *, struct nlm_args *);
-int	nlm4svc_decode_unlockargs(struct svc_rqst *, __be32 *, struct nlm_args *);
-int	nlm4svc_encode_res(struct svc_rqst *, __be32 *, struct nlm_res *);
-int	nlm4svc_decode_res(struct svc_rqst *, __be32 *, struct nlm_res *);
-int	nlm4svc_encode_void(struct svc_rqst *, __be32 *, void *);
-int	nlm4svc_decode_void(struct svc_rqst *, __be32 *, void *);
-int	nlm4svc_decode_shareargs(struct svc_rqst *, __be32 *, struct nlm_args *);
-int	nlm4svc_encode_shareres(struct svc_rqst *, __be32 *, struct nlm_res *);
-int	nlm4svc_decode_notify(struct svc_rqst *, __be32 *, struct nlm_args *);
-int	nlm4svc_decode_reboot(struct svc_rqst *, __be32 *, struct nlm_reboot *);
-/*
-int	nlmclt_encode_testargs(struct rpc_rqst *, u32 *, struct nlm_args *);
-int	nlmclt_encode_lockargs(struct rpc_rqst *, u32 *, struct nlm_args *);
-int	nlmclt_encode_cancargs(struct rpc_rqst *, u32 *, struct nlm_args *);
-int	nlmclt_encode_unlockargs(struct rpc_rqst *, u32 *, struct nlm_args *);
- */
-extern const struct rpc_version nlm_version4;
-
-#endif /* LOCKD_XDR4_H */
diff --git a/ANDROID_3.4.5/include/linux/lockdep.h b/ANDROID_3.4.5/include/linux/lockdep.h
deleted file mode 100644
index d36619ea..00000000
--- a/ANDROID_3.4.5/include/linux/lockdep.h
+++ /dev/null
@@ -1,558 +0,0 @@
-/*
- * Runtime locking correctness validator
- *
- *  Copyright (C) 2006,2007 Red Hat, Inc., Ingo Molnar <mingo@redhat.com>
- *  Copyright (C) 2007 Red Hat, Inc., Peter Zijlstra <pzijlstr@redhat.com>
- *
- * see Documentation/lockdep-design.txt for more details.
- */
-#ifndef __LINUX_LOCKDEP_H
-#define __LINUX_LOCKDEP_H
-
-struct task_struct;
-struct lockdep_map;
-
-/* for sysctl */
-extern int prove_locking;
-extern int lock_stat;
-
-#ifdef CONFIG_LOCKDEP
-
-#include <linux/linkage.h>
-#include <linux/list.h>
-#include <linux/debug_locks.h>
-#include <linux/stacktrace.h>
-
-/*
- * We'd rather not expose kernel/lockdep_states.h this wide, but we do need
- * the total number of states... :-(
- */
-#define XXX_LOCK_USAGE_STATES		(1+3*4)
-
-#define MAX_LOCKDEP_SUBCLASSES		8UL
-
-/*
- * NR_LOCKDEP_CACHING_CLASSES ... Number of classes
- * cached in the instance of lockdep_map
- *
- * Currently main class (subclass == 0) and signle depth subclass
- * are cached in lockdep_map. This optimization is mainly targeting
- * on rq->lock. double_rq_lock() acquires this highly competitive with
- * single depth.
- */
-#define NR_LOCKDEP_CACHING_CLASSES	2
-
-/*
- * Lock-classes are keyed via unique addresses, by embedding the
- * lockclass-key into the kernel (or module) .data section. (For
- * static locks we use the lock address itself as the key.)
- */
-struct lockdep_subclass_key {
-	char __one_byte;
-} __attribute__ ((__packed__));
-
-struct lock_class_key {
-	struct lockdep_subclass_key	subkeys[MAX_LOCKDEP_SUBCLASSES];
-};
-
-extern struct lock_class_key __lockdep_no_validate__;
-
-#define LOCKSTAT_POINTS		4
-
-/*
- * The lock-class itself:
- */
-struct lock_class {
-	/*
-	 * class-hash:
-	 */
-	struct list_head		hash_entry;
-
-	/*
-	 * global list of all lock-classes:
-	 */
-	struct list_head		lock_entry;
-
-	struct lockdep_subclass_key	*key;
-	unsigned int			subclass;
-	unsigned int			dep_gen_id;
-
-	/*
-	 * IRQ/softirq usage tracking bits:
-	 */
-	unsigned long			usage_mask;
-	struct stack_trace		usage_traces[XXX_LOCK_USAGE_STATES];
-
-	/*
-	 * These fields represent a directed graph of lock dependencies,
-	 * to every node we attach a list of "forward" and a list of
-	 * "backward" graph nodes.
-	 */
-	struct list_head		locks_after, locks_before;
-
-	/*
-	 * Generation counter, when doing certain classes of graph walking,
-	 * to ensure that we check one node only once:
-	 */
-	unsigned int			version;
-
-	/*
-	 * Statistics counter:
-	 */
-	unsigned long			ops;
-
-	const char			*name;
-	int				name_version;
-
-#ifdef CONFIG_LOCK_STAT
-	unsigned long			contention_point[LOCKSTAT_POINTS];
-	unsigned long			contending_point[LOCKSTAT_POINTS];
-#endif
-};
-
-#ifdef CONFIG_LOCK_STAT
-struct lock_time {
-	s64				min;
-	s64				max;
-	s64				total;
-	unsigned long			nr;
-};
-
-enum bounce_type {
-	bounce_acquired_write,
-	bounce_acquired_read,
-	bounce_contended_write,
-	bounce_contended_read,
-	nr_bounce_types,
-
-	bounce_acquired = bounce_acquired_write,
-	bounce_contended = bounce_contended_write,
-};
-
-struct lock_class_stats {
-	unsigned long			contention_point[4];
-	unsigned long			contending_point[4];
-	struct lock_time		read_waittime;
-	struct lock_time		write_waittime;
-	struct lock_time		read_holdtime;
-	struct lock_time		write_holdtime;
-	unsigned long			bounces[nr_bounce_types];
-};
-
-struct lock_class_stats lock_stats(struct lock_class *class);
-void clear_lock_stats(struct lock_class *class);
-#endif
-
-/*
- * Map the lock object (the lock instance) to the lock-class object.
- * This is embedded into specific lock instances:
- */
-struct lockdep_map {
-	struct lock_class_key		*key;
-	struct lock_class		*class_cache[NR_LOCKDEP_CACHING_CLASSES];
-	const char			*name;
-#ifdef CONFIG_LOCK_STAT
-	int				cpu;
-	unsigned long			ip;
-#endif
-};
-
-/*
- * Every lock has a list of other locks that were taken after it.
- * We only grow the list, never remove from it:
- */
-struct lock_list {
-	struct list_head		entry;
-	struct lock_class		*class;
-	struct stack_trace		trace;
-	int				distance;
-
-	/*
-	 * The parent field is used to implement breadth-first search, and the
-	 * bit 0 is reused to indicate if the lock has been accessed in BFS.
-	 */
-	struct lock_list		*parent;
-};
-
-/*
- * We record lock dependency chains, so that we can cache them:
- */
-struct lock_chain {
-	u8				irq_context;
-	u8				depth;
-	u16				base;
-	struct list_head		entry;
-	u64				chain_key;
-};
-
-#define MAX_LOCKDEP_KEYS_BITS		13
-/*
- * Subtract one because we offset hlock->class_idx by 1 in order
- * to make 0 mean no class. This avoids overflowing the class_idx
- * bitfield and hitting the BUG in hlock_class().
- */
-#define MAX_LOCKDEP_KEYS		((1UL << MAX_LOCKDEP_KEYS_BITS) - 1)
-
-struct held_lock {
-	/*
-	 * One-way hash of the dependency chain up to this point. We
-	 * hash the hashes step by step as the dependency chain grows.
-	 *
-	 * We use it for dependency-caching and we skip detection
-	 * passes and dependency-updates if there is a cache-hit, so
-	 * it is absolutely critical for 100% coverage of the validator
-	 * to have a unique key value for every unique dependency path
-	 * that can occur in the system, to make a unique hash value
-	 * as likely as possible - hence the 64-bit width.
-	 *
-	 * The task struct holds the current hash value (initialized
-	 * with zero), here we store the previous hash value:
-	 */
-	u64				prev_chain_key;
-	unsigned long			acquire_ip;
-	struct lockdep_map		*instance;
-	struct lockdep_map		*nest_lock;
-#ifdef CONFIG_LOCK_STAT
-	u64 				waittime_stamp;
-	u64				holdtime_stamp;
-#endif
-	unsigned int			class_idx:MAX_LOCKDEP_KEYS_BITS;
-	/*
-	 * The lock-stack is unified in that the lock chains of interrupt
-	 * contexts nest ontop of process context chains, but we 'separate'
-	 * the hashes by starting with 0 if we cross into an interrupt
-	 * context, and we also keep do not add cross-context lock
-	 * dependencies - the lock usage graph walking covers that area
-	 * anyway, and we'd just unnecessarily increase the number of
-	 * dependencies otherwise. [Note: hardirq and softirq contexts
-	 * are separated from each other too.]
-	 *
-	 * The following field is used to detect when we cross into an
-	 * interrupt context:
-	 */
-	unsigned int irq_context:2; /* bit 0 - soft, bit 1 - hard */
-	unsigned int trylock:1;						/* 16 bits */
-
-	unsigned int read:2;        /* see lock_acquire() comment */
-	unsigned int check:2;       /* see lock_acquire() comment */
-	unsigned int hardirqs_off:1;
-	unsigned int references:11;					/* 32 bits */
-};
-
-/*
- * Initialization, self-test and debugging-output methods:
- */
-extern void lockdep_init(void);
-extern void lockdep_info(void);
-extern void lockdep_reset(void);
-extern void lockdep_reset_lock(struct lockdep_map *lock);
-extern void lockdep_free_key_range(void *start, unsigned long size);
-extern void lockdep_sys_exit(void);
-
-extern void lockdep_off(void);
-extern void lockdep_on(void);
-
-/*
- * These methods are used by specific locking variants (spinlocks,
- * rwlocks, mutexes and rwsems) to pass init/acquire/release events
- * to lockdep:
- */
-
-extern void lockdep_init_map(struct lockdep_map *lock, const char *name,
-			     struct lock_class_key *key, int subclass);
-
-/*
- * To initialize a lockdep_map statically use this macro.
- * Note that _name must not be NULL.
- */
-#define STATIC_LOCKDEP_MAP_INIT(_name, _key) \
-	{ .name = (_name), .key = (void *)(_key), }
-
-/*
- * Reinitialize a lock key - for cases where there is special locking or
- * special initialization of locks so that the validator gets the scope
- * of dependencies wrong: they are either too broad (they need a class-split)
- * or they are too narrow (they suffer from a false class-split):
- */
-#define lockdep_set_class(lock, key) \
-		lockdep_init_map(&(lock)->dep_map, #key, key, 0)
-#define lockdep_set_class_and_name(lock, key, name) \
-		lockdep_init_map(&(lock)->dep_map, name, key, 0)
-#define lockdep_set_class_and_subclass(lock, key, sub) \
-		lockdep_init_map(&(lock)->dep_map, #key, key, sub)
-#define lockdep_set_subclass(lock, sub)	\
-		lockdep_init_map(&(lock)->dep_map, #lock, \
-				 (lock)->dep_map.key, sub)
-
-#define lockdep_set_novalidate_class(lock) \
-	lockdep_set_class(lock, &__lockdep_no_validate__)
-/*
- * Compare locking classes
- */
-#define lockdep_match_class(lock, key) lockdep_match_key(&(lock)->dep_map, key)
-
-static inline int lockdep_match_key(struct lockdep_map *lock,
-				    struct lock_class_key *key)
-{
-	return lock->key == key;
-}
-
-/*
- * Acquire a lock.
- *
- * Values for "read":
- *
- *   0: exclusive (write) acquire
- *   1: read-acquire (no recursion allowed)
- *   2: read-acquire with same-instance recursion allowed
- *
- * Values for check:
- *
- *   0: disabled
- *   1: simple checks (freeing, held-at-exit-time, etc.)
- *   2: full validation
- */
-extern void lock_acquire(struct lockdep_map *lock, unsigned int subclass,
-			 int trylock, int read, int check,
-			 struct lockdep_map *nest_lock, unsigned long ip);
-
-extern void lock_release(struct lockdep_map *lock, int nested,
-			 unsigned long ip);
-
-#define lockdep_is_held(lock)	lock_is_held(&(lock)->dep_map)
-
-extern int lock_is_held(struct lockdep_map *lock);
-
-extern void lock_set_class(struct lockdep_map *lock, const char *name,
-			   struct lock_class_key *key, unsigned int subclass,
-			   unsigned long ip);
-
-static inline void lock_set_subclass(struct lockdep_map *lock,
-		unsigned int subclass, unsigned long ip)
-{
-	lock_set_class(lock, lock->name, lock->key, subclass, ip);
-}
-
-extern void lockdep_set_current_reclaim_state(gfp_t gfp_mask);
-extern void lockdep_clear_current_reclaim_state(void);
-extern void lockdep_trace_alloc(gfp_t mask);
-
-# define INIT_LOCKDEP				.lockdep_recursion = 0, .lockdep_reclaim_gfp = 0,
-
-#define lockdep_depth(tsk)	(debug_locks ? (tsk)->lockdep_depth : 0)
-
-#define lockdep_assert_held(l)	WARN_ON(debug_locks && !lockdep_is_held(l))
-
-#define lockdep_recursing(tsk)	((tsk)->lockdep_recursion)
-
-#else /* !LOCKDEP */
-
-static inline void lockdep_off(void)
-{
-}
-
-static inline void lockdep_on(void)
-{
-}
-
-# define lock_acquire(l, s, t, r, c, n, i)	do { } while (0)
-# define lock_release(l, n, i)			do { } while (0)
-# define lock_set_class(l, n, k, s, i)		do { } while (0)
-# define lock_set_subclass(l, s, i)		do { } while (0)
-# define lockdep_set_current_reclaim_state(g)	do { } while (0)
-# define lockdep_clear_current_reclaim_state()	do { } while (0)
-# define lockdep_trace_alloc(g)			do { } while (0)
-# define lockdep_init()				do { } while (0)
-# define lockdep_info()				do { } while (0)
-# define lockdep_init_map(lock, name, key, sub) \
-		do { (void)(name); (void)(key); } while (0)
-# define lockdep_set_class(lock, key)		do { (void)(key); } while (0)
-# define lockdep_set_class_and_name(lock, key, name) \
-		do { (void)(key); (void)(name); } while (0)
-#define lockdep_set_class_and_subclass(lock, key, sub) \
-		do { (void)(key); } while (0)
-#define lockdep_set_subclass(lock, sub)		do { } while (0)
-
-#define lockdep_set_novalidate_class(lock) do { } while (0)
-
-/*
- * We don't define lockdep_match_class() and lockdep_match_key() for !LOCKDEP
- * case since the result is not well defined and the caller should rather
- * #ifdef the call himself.
- */
-
-# define INIT_LOCKDEP
-# define lockdep_reset()		do { debug_locks = 1; } while (0)
-# define lockdep_free_key_range(start, size)	do { } while (0)
-# define lockdep_sys_exit() 			do { } while (0)
-/*
- * The class key takes no space if lockdep is disabled:
- */
-struct lock_class_key { };
-
-#define lockdep_depth(tsk)	(0)
-
-#define lockdep_assert_held(l)			do { } while (0)
-
-#define lockdep_recursing(tsk)			(0)
-
-#endif /* !LOCKDEP */
-
-#ifdef CONFIG_LOCK_STAT
-
-extern void lock_contended(struct lockdep_map *lock, unsigned long ip);
-extern void lock_acquired(struct lockdep_map *lock, unsigned long ip);
-
-#define LOCK_CONTENDED(_lock, try, lock)			\
-do {								\
-	if (!try(_lock)) {					\
-		lock_contended(&(_lock)->dep_map, _RET_IP_);	\
-		lock(_lock);					\
-	}							\
-	lock_acquired(&(_lock)->dep_map, _RET_IP_);			\
-} while (0)
-
-#else /* CONFIG_LOCK_STAT */
-
-#define lock_contended(lockdep_map, ip) do {} while (0)
-#define lock_acquired(lockdep_map, ip) do {} while (0)
-
-#define LOCK_CONTENDED(_lock, try, lock) \
-	lock(_lock)
-
-#endif /* CONFIG_LOCK_STAT */
-
-#ifdef CONFIG_LOCKDEP
-
-/*
- * On lockdep we dont want the hand-coded irq-enable of
- * _raw_*_lock_flags() code, because lockdep assumes
- * that interrupts are not re-enabled during lock-acquire:
- */
-#define LOCK_CONTENDED_FLAGS(_lock, try, lock, lockfl, flags) \
-	LOCK_CONTENDED((_lock), (try), (lock))
-
-#else /* CONFIG_LOCKDEP */
-
-#define LOCK_CONTENDED_FLAGS(_lock, try, lock, lockfl, flags) \
-	lockfl((_lock), (flags))
-
-#endif /* CONFIG_LOCKDEP */
-
-#ifdef CONFIG_TRACE_IRQFLAGS
-extern void print_irqtrace_events(struct task_struct *curr);
-#else
-static inline void print_irqtrace_events(struct task_struct *curr)
-{
-}
-#endif
-
-/*
- * For trivial one-depth nesting of a lock-class, the following
- * global define can be used. (Subsystems with multiple levels
- * of nesting should define their own lock-nesting subclasses.)
- */
-#define SINGLE_DEPTH_NESTING			1
-
-/*
- * Map the dependency ops to NOP or to real lockdep ops, depending
- * on the per lock-class debug mode:
- */
-
-#ifdef CONFIG_DEBUG_LOCK_ALLOC
-# ifdef CONFIG_PROVE_LOCKING
-#  define spin_acquire(l, s, t, i)		lock_acquire(l, s, t, 0, 2, NULL, i)
-#  define spin_acquire_nest(l, s, t, n, i)	lock_acquire(l, s, t, 0, 2, n, i)
-# else
-#  define spin_acquire(l, s, t, i)		lock_acquire(l, s, t, 0, 1, NULL, i)
-#  define spin_acquire_nest(l, s, t, n, i)	lock_acquire(l, s, t, 0, 1, NULL, i)
-# endif
-# define spin_release(l, n, i)			lock_release(l, n, i)
-#else
-# define spin_acquire(l, s, t, i)		do { } while (0)
-# define spin_release(l, n, i)			do { } while (0)
-#endif
-
-#ifdef CONFIG_DEBUG_LOCK_ALLOC
-# ifdef CONFIG_PROVE_LOCKING
-#  define rwlock_acquire(l, s, t, i)		lock_acquire(l, s, t, 0, 2, NULL, i)
-#  define rwlock_acquire_read(l, s, t, i)	lock_acquire(l, s, t, 2, 2, NULL, i)
-# else
-#  define rwlock_acquire(l, s, t, i)		lock_acquire(l, s, t, 0, 1, NULL, i)
-#  define rwlock_acquire_read(l, s, t, i)	lock_acquire(l, s, t, 2, 1, NULL, i)
-# endif
-# define rwlock_release(l, n, i)		lock_release(l, n, i)
-#else
-# define rwlock_acquire(l, s, t, i)		do { } while (0)
-# define rwlock_acquire_read(l, s, t, i)	do { } while (0)
-# define rwlock_release(l, n, i)		do { } while (0)
-#endif
-
-#ifdef CONFIG_DEBUG_LOCK_ALLOC
-# ifdef CONFIG_PROVE_LOCKING
-#  define mutex_acquire(l, s, t, i)		lock_acquire(l, s, t, 0, 2, NULL, i)
-#  define mutex_acquire_nest(l, s, t, n, i)	lock_acquire(l, s, t, 0, 2, n, i)
-# else
-#  define mutex_acquire(l, s, t, i)		lock_acquire(l, s, t, 0, 1, NULL, i)
-#  define mutex_acquire_nest(l, s, t, n, i)	lock_acquire(l, s, t, 0, 1, n, i)
-# endif
-# define mutex_release(l, n, i)			lock_release(l, n, i)
-#else
-# define mutex_acquire(l, s, t, i)		do { } while (0)
-# define mutex_acquire_nest(l, s, t, n, i)	do { } while (0)
-# define mutex_release(l, n, i)			do { } while (0)
-#endif
-
-#ifdef CONFIG_DEBUG_LOCK_ALLOC
-# ifdef CONFIG_PROVE_LOCKING
-#  define rwsem_acquire(l, s, t, i)		lock_acquire(l, s, t, 0, 2, NULL, i)
-#  define rwsem_acquire_read(l, s, t, i)	lock_acquire(l, s, t, 1, 2, NULL, i)
-# else
-#  define rwsem_acquire(l, s, t, i)		lock_acquire(l, s, t, 0, 1, NULL, i)
-#  define rwsem_acquire_read(l, s, t, i)	lock_acquire(l, s, t, 1, 1, NULL, i)
-# endif
-# define rwsem_release(l, n, i)			lock_release(l, n, i)
-#else
-# define rwsem_acquire(l, s, t, i)		do { } while (0)
-# define rwsem_acquire_read(l, s, t, i)		do { } while (0)
-# define rwsem_release(l, n, i)			do { } while (0)
-#endif
-
-#ifdef CONFIG_DEBUG_LOCK_ALLOC
-# ifdef CONFIG_PROVE_LOCKING
-#  define lock_map_acquire(l)		lock_acquire(l, 0, 0, 0, 2, NULL, _THIS_IP_)
-#  define lock_map_acquire_read(l)	lock_acquire(l, 0, 0, 2, 2, NULL, _THIS_IP_)
-# else
-#  define lock_map_acquire(l)		lock_acquire(l, 0, 0, 0, 1, NULL, _THIS_IP_)
-#  define lock_map_acquire_read(l)	lock_acquire(l, 0, 0, 2, 1, NULL, _THIS_IP_)
-# endif
-# define lock_map_release(l)			lock_release(l, 1, _THIS_IP_)
-#else
-# define lock_map_acquire(l)			do { } while (0)
-# define lock_map_acquire_read(l)		do { } while (0)
-# define lock_map_release(l)			do { } while (0)
-#endif
-
-#ifdef CONFIG_PROVE_LOCKING
-# define might_lock(lock) 						\
-do {									\
-	typecheck(struct lockdep_map *, &(lock)->dep_map);		\
-	lock_acquire(&(lock)->dep_map, 0, 0, 0, 2, NULL, _THIS_IP_);	\
-	lock_release(&(lock)->dep_map, 0, _THIS_IP_);			\
-} while (0)
-# define might_lock_read(lock) 						\
-do {									\
-	typecheck(struct lockdep_map *, &(lock)->dep_map);		\
-	lock_acquire(&(lock)->dep_map, 0, 0, 1, 2, NULL, _THIS_IP_);	\
-	lock_release(&(lock)->dep_map, 0, _THIS_IP_);			\
-} while (0)
-#else
-# define might_lock(lock) do { } while (0)
-# define might_lock_read(lock) do { } while (0)
-#endif
-
-#ifdef CONFIG_PROVE_RCU
-void lockdep_rcu_suspicious(const char *file, const int line, const char *s);
-#endif
-
-#endif /* __LINUX_LOCKDEP_H */
diff --git a/ANDROID_3.4.5/include/linux/log2.h b/ANDROID_3.4.5/include/linux/log2.h
deleted file mode 100644
index fd7ff3d9..00000000
--- a/ANDROID_3.4.5/include/linux/log2.h
+++ /dev/null
@@ -1,208 +0,0 @@
-/* Integer base 2 logarithm calculation
- *
- * Copyright (C) 2006 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#ifndef _LINUX_LOG2_H
-#define _LINUX_LOG2_H
-
-#include <linux/types.h>
-#include <linux/bitops.h>
-
-/*
- * deal with unrepresentable constant logarithms
- */
-extern __attribute__((const, noreturn))
-int ____ilog2_NaN(void);
-
-/*
- * non-constant log of base 2 calculators
- * - the arch may override these in asm/bitops.h if they can be implemented
- *   more efficiently than using fls() and fls64()
- * - the arch is not required to handle n==0 if implementing the fallback
- */
-#ifndef CONFIG_ARCH_HAS_ILOG2_U32
-static inline __attribute__((const))
-int __ilog2_u32(u32 n)
-{
-	return fls(n) - 1;
-}
-#endif
-
-#ifndef CONFIG_ARCH_HAS_ILOG2_U64
-static inline __attribute__((const))
-int __ilog2_u64(u64 n)
-{
-	return fls64(n) - 1;
-}
-#endif
-
-/*
- *  Determine whether some value is a power of two, where zero is
- * *not* considered a power of two.
- */
-
-static inline __attribute__((const))
-bool is_power_of_2(unsigned long n)
-{
-	return (n != 0 && ((n & (n - 1)) == 0));
-}
-
-/*
- * round up to nearest power of two
- */
-static inline __attribute__((const))
-unsigned long __roundup_pow_of_two(unsigned long n)
-{
-	return 1UL << fls_long(n - 1);
-}
-
-/*
- * round down to nearest power of two
- */
-static inline __attribute__((const))
-unsigned long __rounddown_pow_of_two(unsigned long n)
-{
-	return 1UL << (fls_long(n) - 1);
-}
-
-/**
- * ilog2 - log of base 2 of 32-bit or a 64-bit unsigned value
- * @n - parameter
- *
- * constant-capable log of base 2 calculation
- * - this can be used to initialise global variables from constant data, hence
- *   the massive ternary operator construction
- *
- * selects the appropriately-sized optimised version depending on sizeof(n)
- */
-#define ilog2(n)				\
-(						\
-	__builtin_constant_p(n) ? (		\
-		(n) < 1 ? ____ilog2_NaN() :	\
-		(n) & (1ULL << 63) ? 63 :	\
-		(n) & (1ULL << 62) ? 62 :	\
-		(n) & (1ULL << 61) ? 61 :	\
-		(n) & (1ULL << 60) ? 60 :	\
-		(n) & (1ULL << 59) ? 59 :	\
-		(n) & (1ULL << 58) ? 58 :	\
-		(n) & (1ULL << 57) ? 57 :	\
-		(n) & (1ULL << 56) ? 56 :	\
-		(n) & (1ULL << 55) ? 55 :	\
-		(n) & (1ULL << 54) ? 54 :	\
-		(n) & (1ULL << 53) ? 53 :	\
-		(n) & (1ULL << 52) ? 52 :	\
-		(n) & (1ULL << 51) ? 51 :	\
-		(n) & (1ULL << 50) ? 50 :	\
-		(n) & (1ULL << 49) ? 49 :	\
-		(n) & (1ULL << 48) ? 48 :	\
-		(n) & (1ULL << 47) ? 47 :	\
-		(n) & (1ULL << 46) ? 46 :	\
-		(n) & (1ULL << 45) ? 45 :	\
-		(n) & (1ULL << 44) ? 44 :	\
-		(n) & (1ULL << 43) ? 43 :	\
-		(n) & (1ULL << 42) ? 42 :	\
-		(n) & (1ULL << 41) ? 41 :	\
-		(n) & (1ULL << 40) ? 40 :	\
-		(n) & (1ULL << 39) ? 39 :	\
-		(n) & (1ULL << 38) ? 38 :	\
-		(n) & (1ULL << 37) ? 37 :	\
-		(n) & (1ULL << 36) ? 36 :	\
-		(n) & (1ULL << 35) ? 35 :	\
-		(n) & (1ULL << 34) ? 34 :	\
-		(n) & (1ULL << 33) ? 33 :	\
-		(n) & (1ULL << 32) ? 32 :	\
-		(n) & (1ULL << 31) ? 31 :	\
-		(n) & (1ULL << 30) ? 30 :	\
-		(n) & (1ULL << 29) ? 29 :	\
-		(n) & (1ULL << 28) ? 28 :	\
-		(n) & (1ULL << 27) ? 27 :	\
-		(n) & (1ULL << 26) ? 26 :	\
-		(n) & (1ULL << 25) ? 25 :	\
-		(n) & (1ULL << 24) ? 24 :	\
-		(n) & (1ULL << 23) ? 23 :	\
-		(n) & (1ULL << 22) ? 22 :	\
-		(n) & (1ULL << 21) ? 21 :	\
-		(n) & (1ULL << 20) ? 20 :	\
-		(n) & (1ULL << 19) ? 19 :	\
-		(n) & (1ULL << 18) ? 18 :	\
-		(n) & (1ULL << 17) ? 17 :	\
-		(n) & (1ULL << 16) ? 16 :	\
-		(n) & (1ULL << 15) ? 15 :	\
-		(n) & (1ULL << 14) ? 14 :	\
-		(n) & (1ULL << 13) ? 13 :	\
-		(n) & (1ULL << 12) ? 12 :	\
-		(n) & (1ULL << 11) ? 11 :	\
-		(n) & (1ULL << 10) ? 10 :	\
-		(n) & (1ULL <<  9) ?  9 :	\
-		(n) & (1ULL <<  8) ?  8 :	\
-		(n) & (1ULL <<  7) ?  7 :	\
-		(n) & (1ULL <<  6) ?  6 :	\
-		(n) & (1ULL <<  5) ?  5 :	\
-		(n) & (1ULL <<  4) ?  4 :	\
-		(n) & (1ULL <<  3) ?  3 :	\
-		(n) & (1ULL <<  2) ?  2 :	\
-		(n) & (1ULL <<  1) ?  1 :	\
-		(n) & (1ULL <<  0) ?  0 :	\
-		____ilog2_NaN()			\
-				   ) :		\
-	(sizeof(n) <= 4) ?			\
-	__ilog2_u32(n) :			\
-	__ilog2_u64(n)				\
- )
-
-/**
- * roundup_pow_of_two - round the given value up to nearest power of two
- * @n - parameter
- *
- * round the given value up to the nearest power of two
- * - the result is undefined when n == 0
- * - this can be used to initialise global variables from constant data
- */
-#define roundup_pow_of_two(n)			\
-(						\
-	__builtin_constant_p(n) ? (		\
-		(n == 1) ? 1 :			\
-		(1UL << (ilog2((n) - 1) + 1))	\
-				   ) :		\
-	__roundup_pow_of_two(n)			\
- )
-
-/**
- * rounddown_pow_of_two - round the given value down to nearest power of two
- * @n - parameter
- *
- * round the given value down to the nearest power of two
- * - the result is undefined when n == 0
- * - this can be used to initialise global variables from constant data
- */
-#define rounddown_pow_of_two(n)			\
-(						\
-	__builtin_constant_p(n) ? (		\
-		(1UL << ilog2(n))) :		\
-	__rounddown_pow_of_two(n)		\
- )
-
-/**
- * order_base_2 - calculate the (rounded up) base 2 order of the argument
- * @n: parameter
- *
- * The first few values calculated by this routine:
- *  ob2(0) = 0
- *  ob2(1) = 0
- *  ob2(2) = 1
- *  ob2(3) = 2
- *  ob2(4) = 2
- *  ob2(5) = 3
- *  ... and so on.
- */
-
-#define order_base_2(n) ilog2(roundup_pow_of_two(n))
-
-#endif /* _LINUX_LOG2_H */
diff --git a/ANDROID_3.4.5/include/linux/loop.h b/ANDROID_3.4.5/include/linux/loop.h
deleted file mode 100644
index 11a41a8f..00000000
--- a/ANDROID_3.4.5/include/linux/loop.h
+++ /dev/null
@@ -1,167 +0,0 @@
-#ifndef _LINUX_LOOP_H
-#define _LINUX_LOOP_H
-
-/*
- * include/linux/loop.h
- *
- * Written by Theodore Ts'o, 3/29/93.
- *
- * Copyright 1993 by Theodore Ts'o.  Redistribution of this file is
- * permitted under the GNU General Public License.
- */
-
-#define LO_NAME_SIZE	64
-#define LO_KEY_SIZE	32
-
-#ifdef __KERNEL__
-#include <linux/bio.h>
-#include <linux/blkdev.h>
-#include <linux/spinlock.h>
-#include <linux/mutex.h>
-
-/* Possible states of device */
-enum {
-	Lo_unbound,
-	Lo_bound,
-	Lo_rundown,
-};
-
-struct loop_func_table;
-
-struct loop_device {
-	int		lo_number;
-	int		lo_refcnt;
-	loff_t		lo_offset;
-	loff_t		lo_sizelimit;
-	int		lo_flags;
-	int		(*transfer)(struct loop_device *, int cmd,
-				    struct page *raw_page, unsigned raw_off,
-				    struct page *loop_page, unsigned loop_off,
-				    int size, sector_t real_block);
-	char		lo_file_name[LO_NAME_SIZE];
-	char		lo_crypt_name[LO_NAME_SIZE];
-	char		lo_encrypt_key[LO_KEY_SIZE];
-	int		lo_encrypt_key_size;
-	struct loop_func_table *lo_encryption;
-	__u32           lo_init[2];
-	uid_t		lo_key_owner;	/* Who set the key */
-	int		(*ioctl)(struct loop_device *, int cmd, 
-				 unsigned long arg); 
-
-	struct file *	lo_backing_file;
-	struct block_device *lo_device;
-	unsigned	lo_blocksize;
-	void		*key_data; 
-
-	gfp_t		old_gfp_mask;
-
-	spinlock_t		lo_lock;
-	struct bio_list		lo_bio_list;
-	int			lo_state;
-	struct mutex		lo_ctl_mutex;
-	struct task_struct	*lo_thread;
-	wait_queue_head_t	lo_event;
-
-	struct request_queue	*lo_queue;
-	struct gendisk		*lo_disk;
-};
-
-#endif /* __KERNEL__ */
-
-/*
- * Loop flags
- */
-enum {
-	LO_FLAGS_READ_ONLY	= 1,
-	LO_FLAGS_AUTOCLEAR	= 4,
-	LO_FLAGS_PARTSCAN	= 8,
-};
-
-#include <asm/posix_types.h>	/* for __kernel_old_dev_t */
-#include <linux/types.h>	/* for __u64 */
-
-/* Backwards compatibility version */
-struct loop_info {
-	int		   lo_number;		/* ioctl r/o */
-	__kernel_old_dev_t lo_device; 		/* ioctl r/o */
-	unsigned long	   lo_inode; 		/* ioctl r/o */
-	__kernel_old_dev_t lo_rdevice; 		/* ioctl r/o */
-	int		   lo_offset;
-	int		   lo_encrypt_type;
-	int		   lo_encrypt_key_size; 	/* ioctl w/o */
-	int		   lo_flags;			/* ioctl r/o */
-	char		   lo_name[LO_NAME_SIZE];
-	unsigned char	   lo_encrypt_key[LO_KEY_SIZE]; /* ioctl w/o */
-	unsigned long	   lo_init[2];
-	char		   reserved[4];
-};
-
-struct loop_info64 {
-	__u64		   lo_device;			/* ioctl r/o */
-	__u64		   lo_inode;			/* ioctl r/o */
-	__u64		   lo_rdevice;			/* ioctl r/o */
-	__u64		   lo_offset;
-	__u64		   lo_sizelimit;/* bytes, 0 == max available */
-	__u32		   lo_number;			/* ioctl r/o */
-	__u32		   lo_encrypt_type;
-	__u32		   lo_encrypt_key_size;		/* ioctl w/o */
-	__u32		   lo_flags;			/* ioctl r/o */
-	__u8		   lo_file_name[LO_NAME_SIZE];
-	__u8		   lo_crypt_name[LO_NAME_SIZE];
-	__u8		   lo_encrypt_key[LO_KEY_SIZE]; /* ioctl w/o */
-	__u64		   lo_init[2];
-};
-
-/*
- * Loop filter types
- */
-
-#define LO_CRYPT_NONE		0
-#define LO_CRYPT_XOR		1
-#define LO_CRYPT_DES		2
-#define LO_CRYPT_FISH2		3    /* Twofish encryption */
-#define LO_CRYPT_BLOW		4
-#define LO_CRYPT_CAST128	5
-#define LO_CRYPT_IDEA		6
-#define LO_CRYPT_DUMMY		9
-#define LO_CRYPT_SKIPJACK	10
-#define LO_CRYPT_CRYPTOAPI	18
-#define MAX_LO_CRYPT		20
-
-#ifdef __KERNEL__
-/* Support for loadable transfer modules */
-struct loop_func_table {
-	int number;	/* filter type */ 
-	int (*transfer)(struct loop_device *lo, int cmd,
-			struct page *raw_page, unsigned raw_off,
-			struct page *loop_page, unsigned loop_off,
-			int size, sector_t real_block);
-	int (*init)(struct loop_device *, const struct loop_info64 *); 
-	/* release is called from loop_unregister_transfer or clr_fd */
-	int (*release)(struct loop_device *); 
-	int (*ioctl)(struct loop_device *, int cmd, unsigned long arg);
-	struct module *owner;
-}; 
-
-int loop_register_transfer(struct loop_func_table *funcs);
-int loop_unregister_transfer(int number); 
-
-#endif
-/*
- * IOCTL commands --- we will commandeer 0x4C ('L')
- */
-
-#define LOOP_SET_FD		0x4C00
-#define LOOP_CLR_FD		0x4C01
-#define LOOP_SET_STATUS		0x4C02
-#define LOOP_GET_STATUS		0x4C03
-#define LOOP_SET_STATUS64	0x4C04
-#define LOOP_GET_STATUS64	0x4C05
-#define LOOP_CHANGE_FD		0x4C06
-#define LOOP_SET_CAPACITY	0x4C07
-
-/* /dev/loop-control interface */
-#define LOOP_CTL_ADD		0x4C80
-#define LOOP_CTL_REMOVE		0x4C81
-#define LOOP_CTL_GET_FREE	0x4C82
-#endif
diff --git a/ANDROID_3.4.5/include/linux/lp.h b/ANDROID_3.4.5/include/linux/lp.h
deleted file mode 100644
index 0df024bf..00000000
--- a/ANDROID_3.4.5/include/linux/lp.h
+++ /dev/null
@@ -1,191 +0,0 @@
-#ifndef _LINUX_LP_H
-#define _LINUX_LP_H
-
-/*
- * usr/include/linux/lp.h c.1991-1992 James Wiegand
- * many modifications copyright (C) 1992 Michael K. Johnson
- * Interrupt support added 1993 Nigel Gamble
- * Removed 8255 status defines from inside __KERNEL__ Marcelo Tosatti 
- */
-
-/*
- * Per POSIX guidelines, this module reserves the LP and lp prefixes
- * These are the lp_table[minor].flags flags...
- */
-#define LP_EXIST 0x0001
-#define LP_SELEC 0x0002
-#define LP_BUSY	 0x0004
-#define LP_BUSY_BIT_POS 2
-#define LP_OFFL	 0x0008
-#define LP_NOPA  0x0010
-#define LP_ERR   0x0020
-#define LP_ABORT 0x0040
-#define LP_CAREFUL 0x0080 /* obsoleted -arca */
-#define LP_ABORTOPEN 0x0100
-
-#define LP_TRUST_IRQ_  0x0200 /* obsolete */
-#define LP_NO_REVERSE  0x0400 /* No reverse mode available. */
-#define LP_DATA_AVAIL  0x0800 /* Data is available. */
-
-/* 
- * bit defines for 8255 status port
- * base + 1
- * accessed with LP_S(minor), which gets the byte...
- */
-#define LP_PBUSY	0x80  /* inverted input, active high */
-#define LP_PACK		0x40  /* unchanged input, active low */
-#define LP_POUTPA	0x20  /* unchanged input, active high */
-#define LP_PSELECD	0x10  /* unchanged input, active high */
-#define LP_PERRORP	0x08  /* unchanged input, active low */
-
-/* timeout for each character.  This is relative to bus cycles -- it
- * is the count in a busy loop.  THIS IS THE VALUE TO CHANGE if you
- * have extremely slow printing, or if the machine seems to slow down
- * a lot when you print.  If you have slow printing, increase this
- * number and recompile, and if your system gets bogged down, decrease
- * this number.  This can be changed with the tunelp(8) command as well.
- */
-
-#define LP_INIT_CHAR 1000
-
-/* The parallel port specs apparently say that there needs to be
- * a .5usec wait before and after the strobe.
- */
-
-#define LP_INIT_WAIT 1
-
-/* This is the amount of time that the driver waits for the printer to
- * catch up when the printer's buffer appears to be filled.  If you
- * want to tune this and have a fast printer (i.e. HPIIIP), decrease
- * this number, and if you have a slow printer, increase this number.
- * This is in hundredths of a second, the default 2 being .05 second.
- * Or use the tunelp(8) command, which is especially nice if you want
- * change back and forth between character and graphics printing, which
- * are wildly different...
- */
-
-#define LP_INIT_TIME 2
-
-/* IOCTL numbers */
-#define LPCHAR   0x0601  /* corresponds to LP_INIT_CHAR */
-#define LPTIME   0x0602  /* corresponds to LP_INIT_TIME */
-#define LPABORT  0x0604  /* call with TRUE arg to abort on error,
-			    FALSE to retry.  Default is retry.  */
-#define LPSETIRQ 0x0605  /* call with new IRQ number,
-			    or 0 for polling (no IRQ) */
-#define LPGETIRQ 0x0606  /* get the current IRQ number */
-#define LPWAIT   0x0608  /* corresponds to LP_INIT_WAIT */
-/* NOTE: LPCAREFUL is obsoleted and it' s always the default right now -arca */
-#define LPCAREFUL   0x0609  /* call with TRUE arg to require out-of-paper, off-
-			    line, and error indicators good on all writes,
-			    FALSE to ignore them.  Default is ignore. */
-#define LPABORTOPEN 0x060a  /* call with TRUE arg to abort open() on error,
-			    FALSE to ignore error.  Default is ignore.  */
-#define LPGETSTATUS 0x060b  /* return LP_S(minor) */
-#define LPRESET     0x060c  /* reset printer */
-#ifdef LP_STATS
-#define LPGETSTATS  0x060d  /* get statistics (struct lp_stats) */
-#endif
-#define LPGETFLAGS  0x060e  /* get status flags */
-#define LPSETTIMEOUT 0x060f /* set parport timeout */
-
-/* timeout for printk'ing a timeout, in jiffies (100ths of a second).
-   This is also used for re-checking error conditions if LP_ABORT is
-   not set.  This is the default behavior. */
-
-#define LP_TIMEOUT_INTERRUPT	(60 * HZ)
-#define LP_TIMEOUT_POLLED	(10 * HZ)
-
-#ifdef __KERNEL__
-
-#include <linux/wait.h>
-#include <linux/mutex.h>
-
-/* Magic numbers for defining port-device mappings */
-#define LP_PARPORT_UNSPEC -4
-#define LP_PARPORT_AUTO -3
-#define LP_PARPORT_OFF -2
-#define LP_PARPORT_NONE -1
-
-#define LP_F(minor)	lp_table[(minor)].flags		/* flags for busy, etc. */
-#define LP_CHAR(minor)	lp_table[(minor)].chars		/* busy timeout */
-#define LP_TIME(minor)	lp_table[(minor)].time		/* wait time */
-#define LP_WAIT(minor)	lp_table[(minor)].wait		/* strobe wait */
-#define LP_IRQ(minor)	lp_table[(minor)].dev->port->irq /* interrupt # */
-					/* PARPORT_IRQ_NONE means polled */
-#ifdef LP_STATS
-#define LP_STAT(minor)	lp_table[(minor)].stats		/* statistics area */
-#endif
-#define LP_BUFFER_SIZE PAGE_SIZE
-
-#define LP_BASE(x)	lp_table[(x)].dev->port->base
-
-#ifdef LP_STATS
-struct lp_stats {
-	unsigned long chars;
-	unsigned long sleeps;
-	unsigned int maxrun;
-	unsigned int maxwait;
-	unsigned int meanwait;
-	unsigned int mdev;
-};
-#endif
-
-struct lp_struct {
-	struct pardevice *dev;
-	unsigned long flags;
-	unsigned int chars;
-	unsigned int time;
-	unsigned int wait;
-	char *lp_buffer;
-#ifdef LP_STATS
-	unsigned int lastcall;
-	unsigned int runchars;
-	struct lp_stats stats;
-#endif
-	wait_queue_head_t waitq;
-	unsigned int last_error;
-	struct mutex port_mutex;
-	wait_queue_head_t dataq;
-	long timeout;
-	unsigned int best_mode;
-	unsigned int current_mode;
-	unsigned long bits;
-};
-
-/*
- * The following constants describe the various signals of the printer port
- * hardware.  Note that the hardware inverts some signals and that some
- * signals are active low.  An example is LP_STROBE, which must be programmed
- * with 1 for being active and 0 for being inactive, because the strobe signal
- * gets inverted, but it is also active low.
- */
-
-
-/* 
- * defines for 8255 control port
- * base + 2 
- * accessed with LP_C(minor)
- */
-#define LP_PINTEN	0x10  /* high to read data in or-ed with data out */
-#define LP_PSELECP	0x08  /* inverted output, active low */
-#define LP_PINITP	0x04  /* unchanged output, active low */
-#define LP_PAUTOLF	0x02  /* inverted output, active low */
-#define LP_PSTROBE	0x01  /* short high output on raising edge */
-
-/* 
- * the value written to ports to test existence. PC-style ports will 
- * return the value written. AT-style ports will return 0. so why not
- * make them the same ? 
- */
-#define LP_DUMMY	0x00
-
-/*
- * This is the port delay time, in microseconds.
- * It is used only in the lp_init() and lp_reset() routine.
- */
-#define LP_DELAY 	50
-
-#endif
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/lp855x.h b/ANDROID_3.4.5/include/linux/lp855x.h
deleted file mode 100644
index 781a490a..00000000
--- a/ANDROID_3.4.5/include/linux/lp855x.h
+++ /dev/null
@@ -1,131 +0,0 @@
-/*
- * LP855x Backlight Driver
- *
- *			Copyright (C) 2011 Texas Instruments
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#ifndef _LP855X_H
-#define _LP855X_H
-
-#define BL_CTL_SHFT	(0)
-#define BRT_MODE_SHFT	(1)
-#define BRT_MODE_MASK	(0x06)
-
-/* Enable backlight. Only valid when BRT_MODE=10(I2C only) */
-#define ENABLE_BL	(1)
-#define DISABLE_BL	(0)
-
-#define I2C_CONFIG(id)	id ## _I2C_CONFIG
-#define PWM_CONFIG(id)	id ## _PWM_CONFIG
-
-/* DEVICE CONTROL register - LP8550 */
-#define LP8550_PWM_CONFIG	(LP8550_PWM_ONLY << BRT_MODE_SHFT)
-#define LP8550_I2C_CONFIG	((ENABLE_BL << BL_CTL_SHFT) | \
-				(LP8550_I2C_ONLY << BRT_MODE_SHFT))
-
-/* DEVICE CONTROL register - LP8551 */
-#define LP8551_PWM_CONFIG	LP8550_PWM_CONFIG
-#define LP8551_I2C_CONFIG	LP8550_I2C_CONFIG
-
-/* DEVICE CONTROL register - LP8552 */
-#define LP8552_PWM_CONFIG	LP8550_PWM_CONFIG
-#define LP8552_I2C_CONFIG	LP8550_I2C_CONFIG
-
-/* DEVICE CONTROL register - LP8553 */
-#define LP8553_PWM_CONFIG	LP8550_PWM_CONFIG
-#define LP8553_I2C_CONFIG	LP8550_I2C_CONFIG
-
-/* DEVICE CONTROL register - LP8556 */
-#define LP8556_PWM_CONFIG	(LP8556_PWM_ONLY << BRT_MODE_SHFT)
-#define LP8556_COMB1_CONFIG	(LP8556_COMBINED1 << BRT_MODE_SHFT)
-#define LP8556_I2C_CONFIG	((ENABLE_BL << BL_CTL_SHFT) | \
-				(LP8556_I2C_ONLY << BRT_MODE_SHFT))
-#define LP8556_COMB2_CONFIG	(LP8556_COMBINED2 << BRT_MODE_SHFT)
-
-/* ROM area boundary */
-#define EEPROM_START	(0xA0)
-#define EEPROM_END	(0xA7)
-#define EPROM_START	(0xA0)
-#define EPROM_END	(0xAF)
-
-enum lp855x_chip_id {
-	LP8550,
-	LP8551,
-	LP8552,
-	LP8553,
-	LP8556,
-};
-
-enum lp855x_brightness_ctrl_mode {
-	PWM_BASED = 1,
-	REGISTER_BASED,
-};
-
-enum lp8550_brighntess_source {
-	LP8550_PWM_ONLY,
-	LP8550_I2C_ONLY = 2,
-};
-
-enum lp8551_brighntess_source {
-	LP8551_PWM_ONLY = LP8550_PWM_ONLY,
-	LP8551_I2C_ONLY = LP8550_I2C_ONLY,
-};
-
-enum lp8552_brighntess_source {
-	LP8552_PWM_ONLY = LP8550_PWM_ONLY,
-	LP8552_I2C_ONLY = LP8550_I2C_ONLY,
-};
-
-enum lp8553_brighntess_source {
-	LP8553_PWM_ONLY = LP8550_PWM_ONLY,
-	LP8553_I2C_ONLY = LP8550_I2C_ONLY,
-};
-
-enum lp8556_brightness_source {
-	LP8556_PWM_ONLY,
-	LP8556_COMBINED1,	/* pwm + i2c before the shaper block */
-	LP8556_I2C_ONLY,
-	LP8556_COMBINED2,	/* pwm + i2c after the shaper block */
-};
-
-struct lp855x_pwm_data {
-	void (*pwm_set_intensity) (int brightness, int max_brightness);
-	int (*pwm_get_intensity) (int max_brightness);
-};
-
-struct lp855x_rom_data {
-	u8 addr;
-	u8 val;
-};
-
-/**
- * struct lp855x_platform_data
- * @name : Backlight driver name. If it is not defined, default name is set.
- * @mode : brightness control by pwm or lp855x register
- * @device_control : value of DEVICE CONTROL register
- * @initial_brightness : initial value of backlight brightness
- * @pwm_data : platform specific pwm generation functions.
-		Only valid when mode is PWM_BASED.
- * @load_new_rom_data :
-	0 : use default configuration data
-	1 : update values of eeprom or eprom registers on loading driver
- * @size_program : total size of lp855x_rom_data
- * @rom_data : list of new eeprom/eprom registers
- */
-struct lp855x_platform_data {
-	char *name;
-	enum lp855x_brightness_ctrl_mode mode;
-	u8 device_control;
-	int initial_brightness;
-	struct lp855x_pwm_data pwm_data;
-	u8 load_new_rom_data;
-	int size_program;
-	struct lp855x_rom_data *rom_data;
-};
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/lp8727.h b/ANDROID_3.4.5/include/linux/lp8727.h
deleted file mode 100644
index ea98c613..00000000
--- a/ANDROID_3.4.5/include/linux/lp8727.h
+++ /dev/null
@@ -1,65 +0,0 @@
-/*
- * LP8727 Micro/Mini USB IC with integrated charger
- *
- *			Copyright (C) 2011 Texas Instruments
- *			Copyright (C) 2011 National Semiconductor
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef _LP8727_H
-#define _LP8727_H
-
-enum lp8727_eoc_level {
-	EOC_5P,
-	EOC_10P,
-	EOC_16P,
-	EOC_20P,
-	EOC_25P,
-	EOC_33P,
-	EOC_50P,
-};
-
-enum lp8727_ichg {
-	ICHG_90mA,
-	ICHG_100mA,
-	ICHG_400mA,
-	ICHG_450mA,
-	ICHG_500mA,
-	ICHG_600mA,
-	ICHG_700mA,
-	ICHG_800mA,
-	ICHG_900mA,
-	ICHG_1000mA,
-};
-
-/**
- * struct lp8727_chg_param
- * @eoc_level : end of charge level setting
- * @ichg : charging current
- */
-struct lp8727_chg_param {
-	enum lp8727_eoc_level eoc_level;
-	enum lp8727_ichg ichg;
-};
-
-/**
- * struct lp8727_platform_data
- * @get_batt_present : check battery status - exists or not
- * @get_batt_level : get battery voltage (mV)
- * @get_batt_capacity : get battery capacity (%)
- * @get_batt_temp : get battery temperature
- * @ac, @usb : charging parameters each charger type
- */
-struct lp8727_platform_data {
-	u8 (*get_batt_present)(void);
-	u16 (*get_batt_level)(void);
-	u8 (*get_batt_capacity)(void);
-	u8 (*get_batt_temp)(void);
-	struct lp8727_chg_param ac;
-	struct lp8727_chg_param usb;
-};
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/lru_cache.h b/ANDROID_3.4.5/include/linux/lru_cache.h
deleted file mode 100644
index 7a71ffad..00000000
--- a/ANDROID_3.4.5/include/linux/lru_cache.h
+++ /dev/null
@@ -1,294 +0,0 @@
-/*
-   lru_cache.c
-
-   This file is part of DRBD by Philipp Reisner and Lars Ellenberg.
-
-   Copyright (C) 2003-2008, LINBIT Information Technologies GmbH.
-   Copyright (C) 2003-2008, Philipp Reisner <philipp.reisner@linbit.com>.
-   Copyright (C) 2003-2008, Lars Ellenberg <lars.ellenberg@linbit.com>.
-
-   drbd is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 2, or (at your option)
-   any later version.
-
-   drbd is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with drbd; see the file COPYING.  If not, write to
-   the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
-
- */
-
-#ifndef LRU_CACHE_H
-#define LRU_CACHE_H
-
-#include <linux/list.h>
-#include <linux/slab.h>
-#include <linux/bitops.h>
-#include <linux/string.h> /* for memset */
-#include <linux/seq_file.h>
-
-/*
-This header file (and its .c file; kernel-doc of functions see there)
-  define a helper framework to easily keep track of index:label associations,
-  and changes to an "active set" of objects, as well as pending transactions,
-  to persistently record those changes.
-
-  We use an LRU policy if it is necessary to "cool down" a region currently in
-  the active set before we can "heat" a previously unused region.
-
-  Because of this later property, it is called "lru_cache".
-  As it actually Tracks Objects in an Active SeT, we could also call it
-  toast (incidentally that is what may happen to the data on the
-  backend storage uppon next resync, if we don't get it right).
-
-What for?
-
-We replicate IO (more or less synchronously) to local and remote disk.
-
-For crash recovery after replication node failure,
-  we need to resync all regions that have been target of in-flight WRITE IO
-  (in use, or "hot", regions), as we don't know wether or not those WRITEs have
-  made it to stable storage.
-
-  To avoid a "full resync", we need to persistently track these regions.
-
-  This is known as "write intent log", and can be implemented as on-disk
-  (coarse or fine grained) bitmap, or other meta data.
-
-  To avoid the overhead of frequent extra writes to this meta data area,
-  usually the condition is softened to regions that _may_ have been target of
-  in-flight WRITE IO, e.g. by only lazily clearing the on-disk write-intent
-  bitmap, trading frequency of meta data transactions against amount of
-  (possibly unnecessary) resync traffic.
-
-  If we set a hard limit on the area that may be "hot" at any given time, we
-  limit the amount of resync traffic needed for crash recovery.
-
-For recovery after replication link failure,
-  we need to resync all blocks that have been changed on the other replica
-  in the mean time, or, if both replica have been changed independently [*],
-  all blocks that have been changed on either replica in the mean time.
-  [*] usually as a result of a cluster split-brain and insufficient protection.
-      but there are valid use cases to do this on purpose.
-
-  Tracking those blocks can be implemented as "dirty bitmap".
-  Having it fine-grained reduces the amount of resync traffic.
-  It should also be persistent, to allow for reboots (or crashes)
-  while the replication link is down.
-
-There are various possible implementations for persistently storing
-write intent log information, three of which are mentioned here.
-
-"Chunk dirtying"
-  The on-disk "dirty bitmap" may be re-used as "write-intent" bitmap as well.
-  To reduce the frequency of bitmap updates for write-intent log purposes,
-  one could dirty "chunks" (of some size) at a time of the (fine grained)
-  on-disk bitmap, while keeping the in-memory "dirty" bitmap as clean as
-  possible, flushing it to disk again when a previously "hot" (and on-disk
-  dirtied as full chunk) area "cools down" again (no IO in flight anymore,
-  and none expected in the near future either).
-
-"Explicit (coarse) write intent bitmap"
-  An other implementation could chose a (probably coarse) explicit bitmap,
-  for write-intent log purposes, additionally to the fine grained dirty bitmap.
-
-"Activity log"
-  Yet an other implementation may keep track of the hot regions, by starting
-  with an empty set, and writing down a journal of region numbers that have
-  become "hot", or have "cooled down" again.
-
-  To be able to use a ring buffer for this journal of changes to the active
-  set, we not only record the actual changes to that set, but also record the
-  not changing members of the set in a round robin fashion. To do so, we use a
-  fixed (but configurable) number of slots which we can identify by index, and
-  associate region numbers (labels) with these indices.
-  For each transaction recording a change to the active set, we record the
-  change itself (index: -old_label, +new_label), and which index is associated
-  with which label (index: current_label) within a certain sliding window that
-  is moved further over the available indices with each such transaction.
-
-  Thus, for crash recovery, if the ringbuffer is sufficiently large, we can
-  accurately reconstruct the active set.
-
-  Sufficiently large depends only on maximum number of active objects, and the
-  size of the sliding window recording "index: current_label" associations within
-  each transaction.
-
-  This is what we call the "activity log".
-
-  Currently we need one activity log transaction per single label change, which
-  does not give much benefit over the "dirty chunks of bitmap" approach, other
-  than potentially less seeks.
-
-  We plan to change the transaction format to support multiple changes per
-  transaction, which then would reduce several (disjoint, "random") updates to
-  the bitmap into one transaction to the activity log ring buffer.
-*/
-
-/* this defines an element in a tracked set
- * .colision is for hash table lookup.
- * When we process a new IO request, we know its sector, thus can deduce the
- * region number (label) easily.  To do the label -> object lookup without a
- * full list walk, we use a simple hash table.
- *
- * .list is on one of three lists:
- *  in_use: currently in use (refcnt > 0, lc_number != LC_FREE)
- *     lru: unused but ready to be reused or recycled
- *          (lc_refcnt == 0, lc_number != LC_FREE),
- *    free: unused but ready to be recycled
- *          (lc_refcnt == 0, lc_number == LC_FREE),
- *
- * an element is said to be "in the active set",
- * if either on "in_use" or "lru", i.e. lc_number != LC_FREE.
- *
- * DRBD currently (May 2009) only uses 61 elements on the resync lru_cache
- * (total memory usage 2 pages), and up to 3833 elements on the act_log
- * lru_cache, totalling ~215 kB for 64bit architecture, ~53 pages.
- *
- * We usually do not actually free these objects again, but only "recycle"
- * them, as the change "index: -old_label, +LC_FREE" would need a transaction
- * as well.  Which also means that using a kmem_cache to allocate the objects
- * from wastes some resources.
- * But it avoids high order page allocations in kmalloc.
- */
-struct lc_element {
-	struct hlist_node colision;
-	struct list_head list;		 /* LRU list or free list */
-	unsigned refcnt;
-	/* back "pointer" into lc_cache->element[index],
-	 * for paranoia, and for "lc_element_to_index" */
-	unsigned lc_index;
-	/* if we want to track a larger set of objects,
-	 * it needs to become arch independend u64 */
-	unsigned lc_number;
-
-	/* special label when on free list */
-#define LC_FREE (~0U)
-};
-
-struct lru_cache {
-	/* the least recently used item is kept at lru->prev */
-	struct list_head lru;
-	struct list_head free;
-	struct list_head in_use;
-
-	/* the pre-created kmem cache to allocate the objects from */
-	struct kmem_cache *lc_cache;
-
-	/* size of tracked objects, used to memset(,0,) them in lc_reset */
-	size_t element_size;
-	/* offset of struct lc_element member in the tracked object */
-	size_t element_off;
-
-	/* number of elements (indices) */
-	unsigned int  nr_elements;
-	/* Arbitrary limit on maximum tracked objects. Practical limit is much
-	 * lower due to allocation failures, probably. For typical use cases,
-	 * nr_elements should be a few thousand at most.
-	 * This also limits the maximum value of lc_element.lc_index, allowing the
-	 * 8 high bits of .lc_index to be overloaded with flags in the future. */
-#define LC_MAX_ACTIVE	(1<<24)
-
-	/* statistics */
-	unsigned used; /* number of lelements currently on in_use list */
-	unsigned long hits, misses, starving, dirty, changed;
-
-	/* see below: flag-bits for lru_cache */
-	unsigned long flags;
-
-	/* when changing the label of an index element */
-	unsigned int  new_number;
-
-	/* for paranoia when changing the label of an index element */
-	struct lc_element *changing_element;
-
-	void  *lc_private;
-	const char *name;
-
-	/* nr_elements there */
-	struct hlist_head *lc_slot;
-	struct lc_element **lc_element;
-};
-
-
-/* flag-bits for lru_cache */
-enum {
-	/* debugging aid, to catch concurrent access early.
-	 * user needs to guarantee exclusive access by proper locking! */
-	__LC_PARANOIA,
-	/* if we need to change the set, but currently there is a changing
-	 * transaction pending, we are "dirty", and must deferr further
-	 * changing requests */
-	__LC_DIRTY,
-	/* if we need to change the set, but currently there is no free nor
-	 * unused element available, we are "starving", and must not give out
-	 * further references, to guarantee that eventually some refcnt will
-	 * drop to zero and we will be able to make progress again, changing
-	 * the set, writing the transaction.
-	 * if the statistics say we are frequently starving,
-	 * nr_elements is too small. */
-	__LC_STARVING,
-};
-#define LC_PARANOIA (1<<__LC_PARANOIA)
-#define LC_DIRTY    (1<<__LC_DIRTY)
-#define LC_STARVING (1<<__LC_STARVING)
-
-extern struct lru_cache *lc_create(const char *name, struct kmem_cache *cache,
-		unsigned e_count, size_t e_size, size_t e_off);
-extern void lc_reset(struct lru_cache *lc);
-extern void lc_destroy(struct lru_cache *lc);
-extern void lc_set(struct lru_cache *lc, unsigned int enr, int index);
-extern void lc_del(struct lru_cache *lc, struct lc_element *element);
-
-extern struct lc_element *lc_try_get(struct lru_cache *lc, unsigned int enr);
-extern struct lc_element *lc_find(struct lru_cache *lc, unsigned int enr);
-extern struct lc_element *lc_get(struct lru_cache *lc, unsigned int enr);
-extern unsigned int lc_put(struct lru_cache *lc, struct lc_element *e);
-extern void lc_changed(struct lru_cache *lc, struct lc_element *e);
-
-struct seq_file;
-extern size_t lc_seq_printf_stats(struct seq_file *seq, struct lru_cache *lc);
-
-extern void lc_seq_dump_details(struct seq_file *seq, struct lru_cache *lc, char *utext,
-				void (*detail) (struct seq_file *, struct lc_element *));
-
-/**
- * lc_try_lock - can be used to stop lc_get() from changing the tracked set
- * @lc: the lru cache to operate on
- *
- * Note that the reference counts and order on the active and lru lists may
- * still change.  Returns true if we acquired the lock.
- */
-static inline int lc_try_lock(struct lru_cache *lc)
-{
-	return !test_and_set_bit(__LC_DIRTY, &lc->flags);
-}
-
-/**
- * lc_unlock - unlock @lc, allow lc_get() to change the set again
- * @lc: the lru cache to operate on
- */
-static inline void lc_unlock(struct lru_cache *lc)
-{
-	clear_bit(__LC_DIRTY, &lc->flags);
-	smp_mb__after_clear_bit();
-}
-
-static inline int lc_is_used(struct lru_cache *lc, unsigned int enr)
-{
-	struct lc_element *e = lc_find(lc, enr);
-	return e && e->refcnt;
-}
-
-#define lc_entry(ptr, type, member) \
-	container_of(ptr, type, member)
-
-extern struct lc_element *lc_element_by_index(struct lru_cache *lc, unsigned i);
-extern unsigned int lc_index_of(struct lru_cache *lc, struct lc_element *e);
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/lsm_audit.h b/ANDROID_3.4.5/include/linux/lsm_audit.h
deleted file mode 100644
index fad48aab..00000000
--- a/ANDROID_3.4.5/include/linux/lsm_audit.h
+++ /dev/null
@@ -1,105 +0,0 @@
-/*
- * Common LSM logging functions
- * Heavily borrowed from selinux/avc.h
- *
- * Author : Etienne BASSET  <etienne.basset@ensta.org>
- *
- * All credits to : Stephen Smalley, <sds@epoch.ncsc.mil>
- * All BUGS to : Etienne BASSET  <etienne.basset@ensta.org>
- */
-#ifndef _LSM_COMMON_LOGGING_
-#define _LSM_COMMON_LOGGING_
-
-#include <linux/stddef.h>
-#include <linux/errno.h>
-#include <linux/kernel.h>
-#include <linux/kdev_t.h>
-#include <linux/spinlock.h>
-#include <linux/init.h>
-#include <linux/audit.h>
-#include <linux/in6.h>
-#include <linux/path.h>
-#include <linux/key.h>
-#include <linux/skbuff.h>
-
-struct lsm_network_audit {
-	int netif;
-	struct sock *sk;
-	u16 family;
-	__be16 dport;
-	__be16 sport;
-	union {
-		struct {
-			__be32 daddr;
-			__be32 saddr;
-		} v4;
-		struct {
-			struct in6_addr daddr;
-			struct in6_addr saddr;
-		} v6;
-	} fam;
-};
-
-/* Auxiliary data to use in generating the audit record. */
-struct common_audit_data {
-	char type;
-#define LSM_AUDIT_DATA_PATH	1
-#define LSM_AUDIT_DATA_NET	2
-#define LSM_AUDIT_DATA_CAP	3
-#define LSM_AUDIT_DATA_IPC	4
-#define LSM_AUDIT_DATA_TASK	5
-#define LSM_AUDIT_DATA_KEY	6
-#define LSM_AUDIT_DATA_NONE	7
-#define LSM_AUDIT_DATA_KMOD	8
-#define LSM_AUDIT_DATA_INODE	9
-#define LSM_AUDIT_DATA_DENTRY	10
-	struct task_struct *tsk;
-	union 	{
-		struct path path;
-		struct dentry *dentry;
-		struct inode *inode;
-		struct lsm_network_audit *net;
-		int cap;
-		int ipc_id;
-		struct task_struct *tsk;
-#ifdef CONFIG_KEYS
-		struct {
-			key_serial_t key;
-			char *key_desc;
-		} key_struct;
-#endif
-		char *kmod_name;
-	} u;
-	/* this union contains LSM specific data */
-	union {
-#ifdef CONFIG_SECURITY_SMACK
-		struct smack_audit_data *smack_audit_data;
-#endif
-#ifdef CONFIG_SECURITY_SELINUX
-		struct selinux_audit_data *selinux_audit_data;
-#endif
-#ifdef CONFIG_SECURITY_APPARMOR
-		struct apparmor_audit_data *apparmor_audit_data;
-#endif
-	}; /* per LSM data pointer union */
-};
-
-#define v4info fam.v4
-#define v6info fam.v6
-
-int ipv4_skb_to_auditdata(struct sk_buff *skb,
-		struct common_audit_data *ad, u8 *proto);
-
-int ipv6_skb_to_auditdata(struct sk_buff *skb,
-		struct common_audit_data *ad, u8 *proto);
-
-/* Initialize an LSM audit data structure. */
-#define COMMON_AUDIT_DATA_INIT(_d, _t) \
-	{ memset((_d), 0, sizeof(struct common_audit_data)); \
-	 (_d)->type = LSM_AUDIT_DATA_##_t; }
-
-void common_lsm_audit(struct common_audit_data *a,
-	void (*pre_audit)(struct audit_buffer *, void *),
-	void (*post_audit)(struct audit_buffer *, void *));
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/lz4.h b/ANDROID_3.4.5/include/linux/lz4.h
deleted file mode 100755
index 8bd8ad7e..00000000
--- a/ANDROID_3.4.5/include/linux/lz4.h
+++ /dev/null
@@ -1,89 +0,0 @@
-#ifndef __LZ4_H__
-#define __LZ4_H__
-/*
- * LZ4 Kernel Interface
- *
- * Copyright (C) 2013, LG Electronics, Kyungsik Lee <kyungsik.lee@lge.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#define LZ4_MEM_COMPRESS	(4096 * sizeof(unsigned char *))
-#define LZ4HC_MEM_COMPRESS	(65538 * sizeof(unsigned char *))
-
-#define lz4_worst_compress(x) ((x) + ((x) / 255) + 16)
-
-/*
- * lz4_compressbound()
- * Provides the maximum size that LZ4 may output in a "worst case" scenario
- * (input data not compressible)
- */
-static inline size_t lz4_compressbound(size_t isize)
-{
-	return isize + (isize / 255) + 16;
-}
-
-/*
- * lz4_compress()
- *	src     : source address of the original data
- *	src_len : size of the original data
- *	dst	: output buffer address of the compressed data
- *		This requires 'dst' of size LZ4_COMPRESSBOUND.
- *	dst_len : is the output size, which is returned after compress done
- *	workmem : address of the working memory.
- *		This requires 'workmem' of size LZ4_MEM_COMPRESS.
- *	return  : Success if return 0
- *		  Error if return (< 0)
- *	note :  Destination buffer and workmem must be already allocated with
- *		the defined size.
- */
-int lz4_compress(const unsigned char *src, size_t src_len,
-		unsigned char *dst, size_t *dst_len, void *wrkmem);
-
- /*
-  * lz4hc_compress()
-  *	 src	 : source address of the original data
-  *	 src_len : size of the original data
-  *	 dst	 : output buffer address of the compressed data
-  *		This requires 'dst' of size LZ4_COMPRESSBOUND.
-  *	 dst_len : is the output size, which is returned after compress done
-  *	 workmem : address of the working memory.
-  *		This requires 'workmem' of size LZ4HC_MEM_COMPRESS.
-  *	 return  : Success if return 0
-  *		   Error if return (< 0)
-  *	 note :  Destination buffer and workmem must be already allocated with
-  *		 the defined size.
-  */
-int lz4hc_compress(const unsigned char *src, size_t src_len,
-		unsigned char *dst, size_t *dst_len, void *wrkmem);
-
-/*
- * lz4_decompress()
- *	src     : source address of the compressed data
- *	src_len : is the input size, whcih is returned after decompress done
- *	dest	: output buffer address of the decompressed data
- *	actual_dest_len: is the size of uncompressed data, supposing it's known
- *	return  : Success if return 0
- *		  Error if return (< 0)
- *	note :  Destination buffer must be already allocated.
- *		slightly faster than lz4_decompress_unknownoutputsize()
- */
-int lz4_decompress(const unsigned char *src, size_t *src_len,
-		unsigned char *dest, size_t actual_dest_len);
-
-/*
- * lz4_decompress_unknownoutputsize()
- *	src     : source address of the compressed data
- *	src_len : is the input size, therefore the compressed size
- *	dest	: output buffer address of the decompressed data
- *	dest_len: is the max size of the destination buffer, which is
- *			returned with actual size of decompressed data after
- *			decompress done
- *	return  : Success if return 0
- *		  Error if return (< 0)
- *	note :  Destination buffer must be already allocated.
- */
-int lz4_decompress_unknownoutputsize(const unsigned char *src, size_t src_len,
-		unsigned char *dest, size_t *dest_len);
-#endif
diff --git a/ANDROID_3.4.5/include/linux/lzo.h b/ANDROID_3.4.5/include/linux/lzo.h
deleted file mode 100644
index d793497e..00000000
--- a/ANDROID_3.4.5/include/linux/lzo.h
+++ /dev/null
@@ -1,44 +0,0 @@
-#ifndef __LZO_H__
-#define __LZO_H__
-/*
- *  LZO Public Kernel Interface
- *  A mini subset of the LZO real-time data compression library
- *
- *  Copyright (C) 1996-2005 Markus F.X.J. Oberhumer <markus@oberhumer.com>
- *
- *  The full LZO package can be found at:
- *  http://www.oberhumer.com/opensource/lzo/
- *
- *  Changed for kernel use by:
- *  Nitin Gupta <nitingupta910@gmail.com>
- *  Richard Purdie <rpurdie@openedhand.com>
- */
-
-#define LZO1X_MEM_COMPRESS	(16384 * sizeof(unsigned char *))
-#define LZO1X_1_MEM_COMPRESS	LZO1X_MEM_COMPRESS
-
-#define lzo1x_worst_compress(x) ((x) + ((x) / 16) + 64 + 3)
-
-/* This requires 'workmem' of size LZO1X_1_MEM_COMPRESS */
-int lzo1x_1_compress(const unsigned char *src, size_t src_len,
-			unsigned char *dst, size_t *dst_len, void *wrkmem);
-
-/* safe decompression with overrun testing */
-int lzo1x_decompress_safe(const unsigned char *src, size_t src_len,
-			unsigned char *dst, size_t *dst_len);
-
-/*
- * Return values (< 0 = Error)
- */
-#define LZO_E_OK			0
-#define LZO_E_ERROR			(-1)
-#define LZO_E_OUT_OF_MEMORY		(-2)
-#define LZO_E_NOT_COMPRESSIBLE		(-3)
-#define LZO_E_INPUT_OVERRUN		(-4)
-#define LZO_E_OUTPUT_OVERRUN		(-5)
-#define LZO_E_LOOKBEHIND_OVERRUN	(-6)
-#define LZO_E_EOF_NOT_FOUND		(-7)
-#define LZO_E_INPUT_NOT_CONSUMED	(-8)
-#define LZO_E_NOT_YET_IMPLEMENTED	(-9)
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/m48t86.h b/ANDROID_3.4.5/include/linux/m48t86.h
deleted file mode 100644
index 915d6b4f..00000000
--- a/ANDROID_3.4.5/include/linux/m48t86.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- * ST M48T86 / Dallas DS12887 RTC driver
- * Copyright (c) 2006 Tower Technologies
- *
- * Author: Alessandro Zummo <a.zummo@towertech.it>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-struct m48t86_ops
-{
-	void (*writebyte)(unsigned char value, unsigned long addr);
-	unsigned char (*readbyte)(unsigned long addr);
-};
diff --git a/ANDROID_3.4.5/include/linux/mISDNdsp.h b/ANDROID_3.4.5/include/linux/mISDNdsp.h
deleted file mode 100644
index 41d1eeb9..00000000
--- a/ANDROID_3.4.5/include/linux/mISDNdsp.h
+++ /dev/null
@@ -1,39 +0,0 @@
-#ifndef __mISDNdsp_H__
-#define __mISDNdsp_H__
-
-struct mISDN_dsp_element_arg {
-	char	*name;
-	char	*def;
-	char	*desc;
-};
-
-struct mISDN_dsp_element {
-	char	*name;
-	void	*(*new)(const char *arg);
-	void	(*free)(void *p);
-	void	(*process_tx)(void *p, unsigned char *data, int len);
-	void	(*process_rx)(void *p, unsigned char *data, int len,
-			unsigned int txlen);
-	int	num_args;
-	struct mISDN_dsp_element_arg
-		*args;
-};
-
-extern int  mISDN_dsp_element_register(struct mISDN_dsp_element *elem);
-extern void mISDN_dsp_element_unregister(struct mISDN_dsp_element *elem);
-
-struct dsp_features {
-	int	hfc_id; /* unique id to identify the chip (or -1) */
-	int	hfc_dtmf; /* set if HFCmulti card supports dtmf */
-	int	hfc_conf; /* set if HFCmulti card supports conferences */
-	int	hfc_loops; /* set if card supports tone loops */
-	int	hfc_echocanhw; /* set if card supports echocancelation*/
-	int	pcm_id; /* unique id to identify the pcm bus (or -1) */
-	int	pcm_slots; /* number of slots on the pcm bus */
-	int	pcm_banks; /* number of IO banks of pcm bus */
-	int	unclocked; /* data is not clocked (has jitter/loss) */
-	int	unordered; /* data is unordered (packets have index) */
-};
-
-#endif
-
diff --git a/ANDROID_3.4.5/include/linux/mISDNhw.h b/ANDROID_3.4.5/include/linux/mISDNhw.h
deleted file mode 100644
index 4af84140..00000000
--- a/ANDROID_3.4.5/include/linux/mISDNhw.h
+++ /dev/null
@@ -1,186 +0,0 @@
-/*
- *
- * Author	Karsten Keil <kkeil@novell.com>
- *
- *   Basic declarations for the mISDN HW channels
- *
- * Copyright 2008  by Karsten Keil <kkeil@novell.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef MISDNHW_H
-#define MISDNHW_H
-#include <linux/mISDNif.h>
-#include <linux/timer.h>
-
-/*
- * HW DEBUG 0xHHHHGGGG
- * H - hardware driver specific bits
- * G - for all drivers
- */
-
-#define DEBUG_HW		0x00000001
-#define DEBUG_HW_OPEN		0x00000002
-#define DEBUG_HW_DCHANNEL	0x00000100
-#define DEBUG_HW_DFIFO		0x00000200
-#define DEBUG_HW_BCHANNEL	0x00001000
-#define DEBUG_HW_BFIFO		0x00002000
-
-#define MAX_DFRAME_LEN_L1	300
-#define MAX_MON_FRAME		32
-#define MAX_LOG_SPACE		2048
-#define MISDN_COPY_SIZE		32
-
-/* channel->Flags bit field */
-#define FLG_TX_BUSY		0	/* tx_buf in use */
-#define FLG_TX_NEXT		1	/* next_skb in use */
-#define FLG_L1_BUSY		2	/* L1 is permanent busy */
-#define FLG_L2_ACTIVATED	3	/* activated from L2 */
-#define FLG_OPEN		5	/* channel is in use */
-#define FLG_ACTIVE		6	/* channel is activated */
-#define FLG_BUSY_TIMER		7
-/* channel type */
-#define FLG_DCHANNEL		8	/* channel is D-channel */
-#define FLG_BCHANNEL		9	/* channel is B-channel */
-#define FLG_ECHANNEL		10	/* channel is E-channel */
-#define FLG_TRANSPARENT		12	/* channel use transparent data */
-#define FLG_HDLC		13	/* channel use hdlc data */
-#define FLG_L2DATA		14	/* channel use L2 DATA primitivs */
-#define FLG_ORIGIN		15	/* channel is on origin site */
-/* channel specific stuff */
-#define FLG_FILLEMPTY		16	/* fill fifo on first frame (empty) */
-/* arcofi specific */
-#define FLG_ARCOFI_TIMER	17
-#define FLG_ARCOFI_ERROR	18
-/* isar specific */
-#define FLG_INITIALIZED		17
-#define FLG_DLEETX		18
-#define FLG_LASTDLE		19
-#define FLG_FIRST		20
-#define FLG_LASTDATA		21
-#define FLG_NMD_DATA		22
-#define FLG_FTI_RUN		23
-#define FLG_LL_OK		24
-#define FLG_LL_CONN		25
-#define FLG_DTMFSEND		26
-
-/* workq events */
-#define FLG_RECVQUEUE		30
-#define	FLG_PHCHANGE		31
-
-#define schedule_event(s, ev)	do { \
-					test_and_set_bit(ev, &((s)->Flags)); \
-					schedule_work(&((s)->workq)); \
-				} while (0)
-
-struct dchannel {
-	struct mISDNdevice	dev;
-	u_long			Flags;
-	struct work_struct	workq;
-	void			(*phfunc) (struct dchannel *);
-	u_int			state;
-	void			*l1;
-	void			*hw;
-	int			slot;	/* multiport card channel slot */
-	struct timer_list	timer;
-	/* receive data */
-	struct sk_buff		*rx_skb;
-	int			maxlen;
-	/* send data */
-	struct sk_buff_head	squeue;
-	struct sk_buff_head	rqueue;
-	struct sk_buff		*tx_skb;
-	int			tx_idx;
-	int			debug;
-	/* statistics */
-	int			err_crc;
-	int			err_tx;
-	int			err_rx;
-};
-
-typedef int	(dchannel_l1callback)(struct dchannel *, u_int);
-extern int	create_l1(struct dchannel *, dchannel_l1callback *);
-
-/* private L1 commands */
-#define INFO0		0x8002
-#define INFO1		0x8102
-#define INFO2		0x8202
-#define INFO3_P8	0x8302
-#define INFO3_P10	0x8402
-#define INFO4_P8	0x8502
-#define INFO4_P10	0x8602
-#define LOSTFRAMING	0x8702
-#define ANYSIGNAL	0x8802
-#define HW_POWERDOWN	0x8902
-#define HW_RESET_REQ	0x8a02
-#define HW_POWERUP_REQ	0x8b02
-#define HW_DEACT_REQ	0x8c02
-#define HW_ACTIVATE_REQ	0x8e02
-#define HW_D_NOBLOCKED  0x8f02
-#define HW_RESET_IND	0x9002
-#define HW_POWERUP_IND	0x9102
-#define HW_DEACT_IND	0x9202
-#define HW_ACTIVATE_IND	0x9302
-#define HW_DEACT_CNF	0x9402
-#define HW_TESTLOOP	0x9502
-#define HW_TESTRX_RAW	0x9602
-#define HW_TESTRX_HDLC	0x9702
-#define HW_TESTRX_OFF	0x9802
-
-struct layer1;
-extern int	l1_event(struct layer1 *, u_int);
-
-
-struct bchannel {
-	struct mISDNchannel	ch;
-	int			nr;
-	u_long			Flags;
-	struct work_struct	workq;
-	u_int			state;
-	void			*hw;
-	int			slot;	/* multiport card channel slot */
-	struct timer_list	timer;
-	/* receive data */
-	struct sk_buff		*rx_skb;
-	int			maxlen;
-	/* send data */
-	struct sk_buff		*next_skb;
-	struct sk_buff		*tx_skb;
-	struct sk_buff_head	rqueue;
-	int			rcount;
-	int			tx_idx;
-	int			debug;
-	/* statistics */
-	int			err_crc;
-	int			err_tx;
-	int			err_rx;
-};
-
-extern int	mISDN_initdchannel(struct dchannel *, int, void *);
-extern int	mISDN_initbchannel(struct bchannel *, int);
-extern int	mISDN_freedchannel(struct dchannel *);
-extern void	mISDN_clear_bchannel(struct bchannel *);
-extern int	mISDN_freebchannel(struct bchannel *);
-extern void	queue_ch_frame(struct mISDNchannel *, u_int,
-			int, struct sk_buff *);
-extern int	dchannel_senddata(struct dchannel *, struct sk_buff *);
-extern int	bchannel_senddata(struct bchannel *, struct sk_buff *);
-extern void	recv_Dchannel(struct dchannel *);
-extern void	recv_Echannel(struct dchannel *, struct dchannel *);
-extern void	recv_Bchannel(struct bchannel *, unsigned int id);
-extern void	recv_Dchannel_skb(struct dchannel *, struct sk_buff *);
-extern void	recv_Bchannel_skb(struct bchannel *, struct sk_buff *);
-extern void	confirm_Bsend(struct bchannel *bch);
-extern int	get_next_bframe(struct bchannel *);
-extern int	get_next_dframe(struct dchannel *);
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/mISDNif.h b/ANDROID_3.4.5/include/linux/mISDNif.h
deleted file mode 100644
index b5e7f220..00000000
--- a/ANDROID_3.4.5/include/linux/mISDNif.h
+++ /dev/null
@@ -1,590 +0,0 @@
-/*
- *
- * Author	Karsten Keil <kkeil@novell.com>
- *
- * Copyright 2008  by Karsten Keil <kkeil@novell.com>
- *
- * This code is free software; you can redistribute it and/or modify
- * it under the terms of the GNU LESSER GENERAL PUBLIC LICENSE
- * version 2.1 as published by the Free Software Foundation.
- *
- * This code is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU LESSER GENERAL PUBLIC LICENSE for more details.
- *
- */
-
-#ifndef mISDNIF_H
-#define mISDNIF_H
-
-#include <stdarg.h>
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <linux/socket.h>
-
-/*
- * ABI Version 32 bit
- *
- * <8 bit> Major version
- *		- changed if any interface become backwards incompatible
- *
- * <8 bit> Minor version
- *              - changed if any interface is extended but backwards compatible
- *
- * <16 bit> Release number
- *              - should be incremented on every checkin
- */
-#define	MISDN_MAJOR_VERSION	1
-#define	MISDN_MINOR_VERSION	1
-#define MISDN_RELEASE		21
-
-/* primitives for information exchange
- * generell format
- * <16  bit  0 >
- * <8  bit command>
- *    BIT 8 = 1 LAYER private
- *    BIT 7 = 1 answer
- *    BIT 6 = 1 DATA
- * <8  bit target layer mask>
- *
- * Layer = 00 is reserved for general commands
-   Layer = 01  L2 -> HW
-   Layer = 02  HW -> L2
-   Layer = 04  L3 -> L2
-   Layer = 08  L2 -> L3
- * Layer = FF is reserved for broadcast commands
- */
-
-#define MISDN_CMDMASK		0xff00
-#define MISDN_LAYERMASK		0x00ff
-
-/* generell commands */
-#define OPEN_CHANNEL		0x0100
-#define CLOSE_CHANNEL		0x0200
-#define CONTROL_CHANNEL		0x0300
-#define CHECK_DATA		0x0400
-
-/* layer 2 -> layer 1 */
-#define PH_ACTIVATE_REQ		0x0101
-#define PH_DEACTIVATE_REQ	0x0201
-#define PH_DATA_REQ		0x2001
-#define MPH_ACTIVATE_REQ	0x0501
-#define MPH_DEACTIVATE_REQ	0x0601
-#define MPH_INFORMATION_REQ	0x0701
-#define PH_CONTROL_REQ		0x0801
-
-/* layer 1 -> layer 2 */
-#define PH_ACTIVATE_IND		0x0102
-#define PH_ACTIVATE_CNF		0x4102
-#define PH_DEACTIVATE_IND	0x0202
-#define PH_DEACTIVATE_CNF	0x4202
-#define PH_DATA_IND		0x2002
-#define PH_DATA_E_IND		0x3002
-#define MPH_ACTIVATE_IND	0x0502
-#define MPH_DEACTIVATE_IND	0x0602
-#define MPH_INFORMATION_IND	0x0702
-#define PH_DATA_CNF		0x6002
-#define PH_CONTROL_IND		0x0802
-#define PH_CONTROL_CNF		0x4802
-
-/* layer 3 -> layer 2 */
-#define DL_ESTABLISH_REQ	0x1004
-#define DL_RELEASE_REQ		0x1104
-#define DL_DATA_REQ		0x3004
-#define DL_UNITDATA_REQ		0x3104
-#define DL_INFORMATION_REQ	0x0004
-
-/* layer 2 -> layer 3 */
-#define DL_ESTABLISH_IND	0x1008
-#define DL_ESTABLISH_CNF	0x5008
-#define DL_RELEASE_IND		0x1108
-#define DL_RELEASE_CNF		0x5108
-#define DL_DATA_IND		0x3008
-#define DL_UNITDATA_IND		0x3108
-#define DL_INFORMATION_IND	0x0008
-
-/* intern layer 2 management */
-#define MDL_ASSIGN_REQ		0x1804
-#define MDL_ASSIGN_IND		0x1904
-#define MDL_REMOVE_REQ		0x1A04
-#define MDL_REMOVE_IND		0x1B04
-#define MDL_STATUS_UP_IND	0x1C04
-#define MDL_STATUS_DOWN_IND	0x1D04
-#define MDL_STATUS_UI_IND	0x1E04
-#define MDL_ERROR_IND		0x1F04
-#define MDL_ERROR_RSP		0x5F04
-
-/* DL_INFORMATION_IND types */
-#define DL_INFO_L2_CONNECT	0x0001
-#define DL_INFO_L2_REMOVED	0x0002
-
-/* PH_CONTROL types */
-/* TOUCH TONE IS 0x20XX  XX "0"..."9", "A","B","C","D","*","#" */
-#define DTMF_TONE_VAL		0x2000
-#define DTMF_TONE_MASK		0x007F
-#define DTMF_TONE_START		0x2100
-#define DTMF_TONE_STOP		0x2200
-#define DTMF_HFC_COEF		0x4000
-#define DSP_CONF_JOIN		0x2403
-#define DSP_CONF_SPLIT		0x2404
-#define DSP_RECEIVE_OFF		0x2405
-#define DSP_RECEIVE_ON		0x2406
-#define DSP_ECHO_ON		0x2407
-#define DSP_ECHO_OFF		0x2408
-#define DSP_MIX_ON		0x2409
-#define DSP_MIX_OFF		0x240a
-#define DSP_DELAY		0x240b
-#define DSP_JITTER		0x240c
-#define DSP_TXDATA_ON		0x240d
-#define DSP_TXDATA_OFF		0x240e
-#define DSP_TX_DEJITTER		0x240f
-#define DSP_TX_DEJ_OFF		0x2410
-#define DSP_TONE_PATT_ON	0x2411
-#define DSP_TONE_PATT_OFF	0x2412
-#define DSP_VOL_CHANGE_TX	0x2413
-#define DSP_VOL_CHANGE_RX	0x2414
-#define DSP_BF_ENABLE_KEY	0x2415
-#define DSP_BF_DISABLE		0x2416
-#define DSP_BF_ACCEPT		0x2416
-#define DSP_BF_REJECT		0x2417
-#define DSP_PIPELINE_CFG	0x2418
-#define HFC_VOL_CHANGE_TX	0x2601
-#define HFC_VOL_CHANGE_RX	0x2602
-#define HFC_SPL_LOOP_ON		0x2603
-#define HFC_SPL_LOOP_OFF	0x2604
-/* for T30 FAX and analog modem */
-#define HW_MOD_FRM		0x4000
-#define HW_MOD_FRH		0x4001
-#define HW_MOD_FTM		0x4002
-#define HW_MOD_FTH		0x4003
-#define HW_MOD_FTS		0x4004
-#define HW_MOD_CONNECT		0x4010
-#define HW_MOD_OK		0x4011
-#define HW_MOD_NOCARR		0x4012
-#define HW_MOD_FCERROR		0x4013
-#define HW_MOD_READY		0x4014
-#define HW_MOD_LASTDATA		0x4015
-
-/* DSP_TONE_PATT_ON parameter */
-#define TONE_OFF			0x0000
-#define TONE_GERMAN_DIALTONE		0x0001
-#define TONE_GERMAN_OLDDIALTONE		0x0002
-#define TONE_AMERICAN_DIALTONE		0x0003
-#define TONE_GERMAN_DIALPBX		0x0004
-#define TONE_GERMAN_OLDDIALPBX		0x0005
-#define TONE_AMERICAN_DIALPBX		0x0006
-#define TONE_GERMAN_RINGING		0x0007
-#define TONE_GERMAN_OLDRINGING		0x0008
-#define TONE_AMERICAN_RINGPBX		0x000b
-#define TONE_GERMAN_RINGPBX		0x000c
-#define TONE_GERMAN_OLDRINGPBX		0x000d
-#define TONE_AMERICAN_RINGING		0x000e
-#define TONE_GERMAN_BUSY		0x000f
-#define TONE_GERMAN_OLDBUSY		0x0010
-#define TONE_AMERICAN_BUSY		0x0011
-#define TONE_GERMAN_HANGUP		0x0012
-#define TONE_GERMAN_OLDHANGUP		0x0013
-#define TONE_AMERICAN_HANGUP		0x0014
-#define TONE_SPECIAL_INFO		0x0015
-#define TONE_GERMAN_GASSENBESETZT	0x0016
-#define TONE_GERMAN_AUFSCHALTTON	0x0016
-
-/* MPH_INFORMATION_IND */
-#define L1_SIGNAL_LOS_OFF	0x0010
-#define L1_SIGNAL_LOS_ON	0x0011
-#define L1_SIGNAL_AIS_OFF	0x0012
-#define L1_SIGNAL_AIS_ON	0x0013
-#define L1_SIGNAL_RDI_OFF	0x0014
-#define L1_SIGNAL_RDI_ON	0x0015
-#define L1_SIGNAL_SLIP_RX	0x0020
-#define L1_SIGNAL_SLIP_TX	0x0021
-
-/*
- * protocol ids
- * D channel 1-31
- * B channel 33 - 63
- */
-
-#define ISDN_P_NONE		0
-#define ISDN_P_BASE		0
-#define ISDN_P_TE_S0		0x01
-#define ISDN_P_NT_S0  		0x02
-#define ISDN_P_TE_E1		0x03
-#define ISDN_P_NT_E1  		0x04
-#define ISDN_P_TE_UP0		0x05
-#define ISDN_P_NT_UP0		0x06
-
-#define IS_ISDN_P_TE(p) ((p == ISDN_P_TE_S0) || (p == ISDN_P_TE_E1) || \
-				(p == ISDN_P_TE_UP0) || (p == ISDN_P_LAPD_TE))
-#define IS_ISDN_P_NT(p) ((p == ISDN_P_NT_S0) || (p == ISDN_P_NT_E1) || \
-				(p == ISDN_P_NT_UP0) || (p == ISDN_P_LAPD_NT))
-#define IS_ISDN_P_S0(p) ((p == ISDN_P_TE_S0) || (p == ISDN_P_NT_S0))
-#define IS_ISDN_P_E1(p) ((p == ISDN_P_TE_E1) || (p == ISDN_P_NT_E1))
-#define IS_ISDN_P_UP0(p) ((p == ISDN_P_TE_UP0) || (p == ISDN_P_NT_UP0))
-
-
-#define ISDN_P_LAPD_TE		0x10
-#define	ISDN_P_LAPD_NT		0x11
-
-#define ISDN_P_B_MASK		0x1f
-#define ISDN_P_B_START		0x20
-
-#define ISDN_P_B_RAW		0x21
-#define ISDN_P_B_HDLC		0x22
-#define ISDN_P_B_X75SLP		0x23
-#define ISDN_P_B_L2DTMF		0x24
-#define ISDN_P_B_L2DSP		0x25
-#define ISDN_P_B_L2DSPHDLC	0x26
-#define ISDN_P_B_T30_FAX	0x27
-#define ISDN_P_B_MODEM_ASYNC	0x28
-
-#define OPTION_L2_PMX		1
-#define OPTION_L2_PTP		2
-#define OPTION_L2_FIXEDTEI	3
-#define OPTION_L2_CLEANUP	4
-#define OPTION_L1_HOLD		5
-
-/* should be in sync with linux/kobject.h:KOBJ_NAME_LEN */
-#define MISDN_MAX_IDLEN		20
-
-struct mISDNhead {
-	unsigned int	prim;
-	unsigned int	id;
-}  __packed;
-
-#define MISDN_HEADER_LEN	sizeof(struct mISDNhead)
-#define MAX_DATA_SIZE		2048
-#define MAX_DATA_MEM		(MAX_DATA_SIZE + MISDN_HEADER_LEN)
-#define MAX_DFRAME_LEN		260
-
-#define MISDN_ID_ADDR_MASK	0xFFFF
-#define MISDN_ID_TEI_MASK	0xFF00
-#define MISDN_ID_SAPI_MASK	0x00FF
-#define MISDN_ID_TEI_ANY	0x7F00
-
-#define MISDN_ID_ANY		0xFFFF
-#define MISDN_ID_NONE		0xFFFE
-
-#define GROUP_TEI		127
-#define TEI_SAPI		63
-#define CTRL_SAPI		0
-
-#define MISDN_MAX_CHANNEL	127
-#define MISDN_CHMAP_SIZE	((MISDN_MAX_CHANNEL + 1) >> 3)
-
-#define SOL_MISDN	0
-
-struct sockaddr_mISDN {
-	sa_family_t    family;
-	unsigned char	dev;
-	unsigned char	channel;
-	unsigned char	sapi;
-	unsigned char	tei;
-};
-
-struct mISDNversion {
-	unsigned char	major;
-	unsigned char	minor;
-	unsigned short	release;
-};
-
-struct mISDN_devinfo {
-	u_int			id;
-	u_int			Dprotocols;
-	u_int			Bprotocols;
-	u_int			protocol;
-	u_char			channelmap[MISDN_CHMAP_SIZE];
-	u_int			nrbchan;
-	char			name[MISDN_MAX_IDLEN];
-};
-
-struct mISDN_devrename {
-	u_int			id;
-	char			name[MISDN_MAX_IDLEN]; /* new name */
-};
-
-/* MPH_INFORMATION_REQ payload */
-struct ph_info_ch {
-	__u32 protocol;
-	__u64 Flags;
-};
-
-struct ph_info_dch {
-	struct ph_info_ch ch;
-	__u16 state;
-	__u16 num_bch;
-};
-
-struct ph_info {
-	struct ph_info_dch dch;
-	struct ph_info_ch  bch[];
-};
-
-/* timer device ioctl */
-#define IMADDTIMER	_IOR('I', 64, int)
-#define IMDELTIMER	_IOR('I', 65, int)
-
-/* socket ioctls */
-#define	IMGETVERSION	_IOR('I', 66, int)
-#define	IMGETCOUNT	_IOR('I', 67, int)
-#define IMGETDEVINFO	_IOR('I', 68, int)
-#define IMCTRLREQ	_IOR('I', 69, int)
-#define IMCLEAR_L2	_IOR('I', 70, int)
-#define IMSETDEVNAME	_IOR('I', 71, struct mISDN_devrename)
-#define IMHOLD_L1	_IOR('I', 72, int)
-
-static inline int
-test_channelmap(u_int nr, u_char *map)
-{
-	if (nr <= MISDN_MAX_CHANNEL)
-		return map[nr >> 3] & (1 << (nr & 7));
-	else
-		return 0;
-}
-
-static inline void
-set_channelmap(u_int nr, u_char *map)
-{
-	map[nr >> 3] |= (1 << (nr & 7));
-}
-
-static inline void
-clear_channelmap(u_int nr, u_char *map)
-{
-	map[nr >> 3] &= ~(1 << (nr & 7));
-}
-
-/* CONTROL_CHANNEL parameters */
-#define MISDN_CTRL_GETOP		0x0000
-#define MISDN_CTRL_LOOP			0x0001
-#define MISDN_CTRL_CONNECT		0x0002
-#define MISDN_CTRL_DISCONNECT		0x0004
-#define MISDN_CTRL_PCMCONNECT		0x0010
-#define MISDN_CTRL_PCMDISCONNECT	0x0020
-#define MISDN_CTRL_SETPEER		0x0040
-#define MISDN_CTRL_UNSETPEER		0x0080
-#define MISDN_CTRL_RX_OFF		0x0100
-#define MISDN_CTRL_FILL_EMPTY		0x0200
-#define MISDN_CTRL_GETPEER		0x0400
-#define MISDN_CTRL_HW_FEATURES_OP	0x2000
-#define MISDN_CTRL_HW_FEATURES		0x2001
-#define MISDN_CTRL_HFC_OP		0x4000
-#define MISDN_CTRL_HFC_PCM_CONN		0x4001
-#define MISDN_CTRL_HFC_PCM_DISC		0x4002
-#define MISDN_CTRL_HFC_CONF_JOIN	0x4003
-#define MISDN_CTRL_HFC_CONF_SPLIT	0x4004
-#define MISDN_CTRL_HFC_RECEIVE_OFF	0x4005
-#define MISDN_CTRL_HFC_RECEIVE_ON	0x4006
-#define MISDN_CTRL_HFC_ECHOCAN_ON 	0x4007
-#define MISDN_CTRL_HFC_ECHOCAN_OFF 	0x4008
-#define MISDN_CTRL_HFC_WD_INIT		0x4009
-#define MISDN_CTRL_HFC_WD_RESET		0x400A
-
-/* socket options */
-#define MISDN_TIME_STAMP		0x0001
-
-struct mISDN_ctrl_req {
-	int		op;
-	int		channel;
-	int		p1;
-	int		p2;
-};
-
-/* muxer options */
-#define MISDN_OPT_ALL		1
-#define MISDN_OPT_TEIMGR	2
-
-#ifdef __KERNEL__
-#include <linux/list.h>
-#include <linux/skbuff.h>
-#include <linux/net.h>
-#include <net/sock.h>
-#include <linux/completion.h>
-
-#define DEBUG_CORE		0x000000ff
-#define DEBUG_CORE_FUNC		0x00000002
-#define DEBUG_SOCKET		0x00000004
-#define DEBUG_MANAGER		0x00000008
-#define DEBUG_SEND_ERR		0x00000010
-#define DEBUG_MSG_THREAD	0x00000020
-#define DEBUG_QUEUE_FUNC	0x00000040
-#define DEBUG_L1		0x0000ff00
-#define DEBUG_L1_FSM		0x00000200
-#define DEBUG_L2		0x00ff0000
-#define DEBUG_L2_FSM		0x00020000
-#define DEBUG_L2_CTRL		0x00040000
-#define DEBUG_L2_RECV		0x00080000
-#define DEBUG_L2_TEI		0x00100000
-#define DEBUG_L2_TEIFSM		0x00200000
-#define DEBUG_TIMER		0x01000000
-#define DEBUG_CLOCK		0x02000000
-
-#define mISDN_HEAD_P(s)		((struct mISDNhead *)&s->cb[0])
-#define mISDN_HEAD_PRIM(s)	(((struct mISDNhead *)&s->cb[0])->prim)
-#define mISDN_HEAD_ID(s)	(((struct mISDNhead *)&s->cb[0])->id)
-
-/* socket states */
-#define MISDN_OPEN	1
-#define MISDN_BOUND	2
-#define MISDN_CLOSED	3
-
-struct mISDNchannel;
-struct mISDNdevice;
-struct mISDNstack;
-struct mISDNclock;
-
-struct channel_req {
-	u_int			protocol;
-	struct sockaddr_mISDN	adr;
-	struct mISDNchannel	*ch;
-};
-
-typedef	int	(ctrl_func_t)(struct mISDNchannel *, u_int, void *);
-typedef	int	(send_func_t)(struct mISDNchannel *, struct sk_buff *);
-typedef int	(create_func_t)(struct channel_req *);
-
-struct Bprotocol {
-	struct list_head	list;
-	char			*name;
-	u_int			Bprotocols;
-	create_func_t		*create;
-};
-
-struct mISDNchannel {
-	struct list_head	list;
-	u_int			protocol;
-	u_int			nr;
-	u_long			opt;
-	u_int			addr;
-	struct mISDNstack	*st;
-	struct mISDNchannel	*peer;
-	send_func_t		*send;
-	send_func_t		*recv;
-	ctrl_func_t		*ctrl;
-};
-
-struct mISDN_sock_list {
-	struct hlist_head	head;
-	rwlock_t		lock;
-};
-
-struct mISDN_sock {
-	struct sock		sk;
-	struct mISDNchannel	ch;
-	u_int			cmask;
-	struct mISDNdevice	*dev;
-};
-
-
-
-struct mISDNdevice {
-	struct mISDNchannel	D;
-	u_int			id;
-	u_int			Dprotocols;
-	u_int			Bprotocols;
-	u_int			nrbchan;
-	u_char			channelmap[MISDN_CHMAP_SIZE];
-	struct list_head	bchannels;
-	struct mISDNchannel	*teimgr;
-	struct device		dev;
-};
-
-struct mISDNstack {
-	u_long			status;
-	struct mISDNdevice	*dev;
-	struct task_struct	*thread;
-	struct completion	*notify;
-	wait_queue_head_t	workq;
-	struct sk_buff_head	msgq;
-	struct list_head	layer2;
-	struct mISDNchannel	*layer1;
-	struct mISDNchannel	own;
-	struct mutex		lmutex; /* protect lists */
-	struct mISDN_sock_list	l1sock;
-#ifdef MISDN_MSG_STATS
-	u_int			msg_cnt;
-	u_int			sleep_cnt;
-	u_int			stopped_cnt;
-#endif
-};
-
-typedef	int	(clockctl_func_t)(void *, int);
-
-struct	mISDNclock {
-	struct list_head	list;
-	char			name[64];
-	int			pri;
-	clockctl_func_t		*ctl;
-	void			*priv;
-};
-
-/* global alloc/queue functions */
-
-static inline struct sk_buff *
-mI_alloc_skb(unsigned int len, gfp_t gfp_mask)
-{
-	struct sk_buff	*skb;
-
-	skb = alloc_skb(len + MISDN_HEADER_LEN, gfp_mask);
-	if (likely(skb))
-		skb_reserve(skb, MISDN_HEADER_LEN);
-	return skb;
-}
-
-static inline struct sk_buff *
-_alloc_mISDN_skb(u_int prim, u_int id, u_int len, void *dp, gfp_t gfp_mask)
-{
-	struct sk_buff	*skb = mI_alloc_skb(len, gfp_mask);
-	struct mISDNhead *hh;
-
-	if (!skb)
-		return NULL;
-	if (len)
-		memcpy(skb_put(skb, len), dp, len);
-	hh = mISDN_HEAD_P(skb);
-	hh->prim = prim;
-	hh->id = id;
-	return skb;
-}
-
-static inline void
-_queue_data(struct mISDNchannel *ch, u_int prim,
-    u_int id, u_int len, void *dp, gfp_t gfp_mask)
-{
-	struct sk_buff		*skb;
-
-	if (!ch->peer)
-		return;
-	skb = _alloc_mISDN_skb(prim, id, len, dp, gfp_mask);
-	if (!skb)
-		return;
-	if (ch->recv(ch->peer, skb))
-		dev_kfree_skb(skb);
-}
-
-/* global register/unregister functions */
-
-extern int	mISDN_register_device(struct mISDNdevice *,
-					struct device *parent, char *name);
-extern void	mISDN_unregister_device(struct mISDNdevice *);
-extern int	mISDN_register_Bprotocol(struct Bprotocol *);
-extern void	mISDN_unregister_Bprotocol(struct Bprotocol *);
-extern struct mISDNclock *mISDN_register_clock(char *, int, clockctl_func_t *,
-						void *);
-extern void	mISDN_unregister_clock(struct mISDNclock *);
-
-static inline struct mISDNdevice *dev_to_mISDN(struct device *dev)
-{
-	if (dev)
-		return dev_get_drvdata(dev);
-	else
-		return NULL;
-}
-
-extern void	set_channel_address(struct mISDNchannel *, u_int, u_int);
-extern void	mISDN_clock_update(struct mISDNclock *, int, struct timeval *);
-extern unsigned short mISDN_clock_get(void);
-
-#endif /* __KERNEL__ */
-#endif /* mISDNIF_H */
diff --git a/ANDROID_3.4.5/include/linux/magic.h b/ANDROID_3.4.5/include/linux/magic.h
deleted file mode 100644
index e15192cb..00000000
--- a/ANDROID_3.4.5/include/linux/magic.h
+++ /dev/null
@@ -1,72 +0,0 @@
-#ifndef __LINUX_MAGIC_H__
-#define __LINUX_MAGIC_H__
-
-#define ADFS_SUPER_MAGIC	0xadf5
-#define AFFS_SUPER_MAGIC	0xadff
-#define AFS_SUPER_MAGIC                0x5346414F
-#define AUTOFS_SUPER_MAGIC	0x0187
-#define CODA_SUPER_MAGIC	0x73757245
-#define CRAMFS_MAGIC		0x28cd3d45	/* some random number */
-#define CRAMFS_MAGIC_WEND	0x453dcd28	/* magic number with the wrong endianess */
-#define DEBUGFS_MAGIC          0x64626720
-#define SECURITYFS_MAGIC	0x73636673
-#define SELINUX_MAGIC		0xf97cff8c
-#define RAMFS_MAGIC		0x858458f6	/* some random number */
-#define TMPFS_MAGIC		0x01021994
-#define HUGETLBFS_MAGIC 	0x958458f6	/* some random number */
-#define SQUASHFS_MAGIC		0x73717368
-#define ECRYPTFS_SUPER_MAGIC	0xf15f
-#define EFS_SUPER_MAGIC		0x414A53
-#define EXT2_SUPER_MAGIC	0xEF53
-#define EXT3_SUPER_MAGIC	0xEF53
-#define XENFS_SUPER_MAGIC	0xabba1974
-#define EXT4_SUPER_MAGIC	0xEF53
-#define BTRFS_SUPER_MAGIC	0x9123683E
-#define NILFS_SUPER_MAGIC	0x3434
-#define HPFS_SUPER_MAGIC	0xf995e849
-#define ISOFS_SUPER_MAGIC	0x9660
-#define JFFS2_SUPER_MAGIC	0x72b6
-#define PSTOREFS_MAGIC		0x6165676C
-
-#define MINIX_SUPER_MAGIC	0x137F		/* minix v1 fs, 14 char names */
-#define MINIX_SUPER_MAGIC2	0x138F		/* minix v1 fs, 30 char names */
-#define MINIX2_SUPER_MAGIC	0x2468		/* minix v2 fs, 14 char names */
-#define MINIX2_SUPER_MAGIC2	0x2478		/* minix v2 fs, 30 char names */
-#define MINIX3_SUPER_MAGIC	0x4d5a		/* minix v3 fs, 60 char names */
-
-#define MSDOS_SUPER_MAGIC	0x4d44		/* MD */
-#define NCP_SUPER_MAGIC		0x564c		/* Guess, what 0x564c is :-) */
-#define NFS_SUPER_MAGIC		0x6969
-#define OPENPROM_SUPER_MAGIC	0x9fa1
-#define QNX4_SUPER_MAGIC	0x002f		/* qnx4 fs detection */
-#define QNX6_SUPER_MAGIC	0x68191122	/* qnx6 fs detection */
-
-#define REISERFS_SUPER_MAGIC	0x52654973	/* used by gcc */
-					/* used by file system utilities that
-	                                   look at the superblock, etc.  */
-#define REISERFS_SUPER_MAGIC_STRING	"ReIsErFs"
-#define REISER2FS_SUPER_MAGIC_STRING	"ReIsEr2Fs"
-#define REISER2FS_JR_SUPER_MAGIC_STRING	"ReIsEr3Fs"
-
-#define SMB_SUPER_MAGIC		0x517B
-#define CGROUP_SUPER_MAGIC	0x27e0eb
-
-
-#define STACK_END_MAGIC		0x57AC6E9D
-
-#define V9FS_MAGIC		0x01021997
-
-#define BDEVFS_MAGIC            0x62646576
-#define BINFMTFS_MAGIC          0x42494e4d
-#define DEVPTS_SUPER_MAGIC	0x1cd1
-#define FUTEXFS_SUPER_MAGIC	0xBAD1DEA
-#define PIPEFS_MAGIC            0x50495045
-#define PROC_SUPER_MAGIC	0x9fa0
-#define SOCKFS_MAGIC		0x534F434B
-#define SYSFS_MAGIC		0x62656572
-#define USBDEVICE_SUPER_MAGIC	0x9fa2
-#define MTD_INODE_FS_MAGIC      0x11307854
-#define ANON_INODE_FS_MAGIC	0x09041934
-
-
-#endif /* __LINUX_MAGIC_H__ */
diff --git a/ANDROID_3.4.5/include/linux/major.h b/ANDROID_3.4.5/include/linux/major.h
deleted file mode 100644
index 14706398..00000000
--- a/ANDROID_3.4.5/include/linux/major.h
+++ /dev/null
@@ -1,184 +0,0 @@
-#ifndef _LINUX_MAJOR_H
-#define _LINUX_MAJOR_H
-
-/*
- * This file has definitions for major device numbers.
- * For the device number assignments, see Documentation/devices.txt.
- */
-
-#define UNNAMED_MAJOR		0
-#define MEM_MAJOR		1
-#define RAMDISK_MAJOR		1
-#define FLOPPY_MAJOR		2
-#define PTY_MASTER_MAJOR	2
-#define IDE0_MAJOR		3
-#define HD_MAJOR		IDE0_MAJOR
-#define PTY_SLAVE_MAJOR		3
-#define TTY_MAJOR		4
-#define TTYAUX_MAJOR		5
-#define LP_MAJOR		6
-#define VCS_MAJOR		7
-#define LOOP_MAJOR		7
-#define SCSI_DISK0_MAJOR	8
-#define SCSI_TAPE_MAJOR		9
-#define MD_MAJOR		9
-#define MISC_MAJOR		10
-#define SCSI_CDROM_MAJOR	11
-#define MUX_MAJOR		11	/* PA-RISC only */
-#define XT_DISK_MAJOR		13
-#define INPUT_MAJOR		13
-#define SOUND_MAJOR		14
-#define CDU31A_CDROM_MAJOR	15
-#define JOYSTICK_MAJOR		15
-#define GOLDSTAR_CDROM_MAJOR	16
-#define OPTICS_CDROM_MAJOR	17
-#define SANYO_CDROM_MAJOR	18
-#define CYCLADES_MAJOR		19
-#define CYCLADESAUX_MAJOR	20
-#define MITSUMI_X_CDROM_MAJOR	20
-#define MFM_ACORN_MAJOR		21	/* ARM Linux /dev/mfm */
-#define SCSI_GENERIC_MAJOR	21
-#define IDE1_MAJOR		22
-#define DIGICU_MAJOR		22
-#define DIGI_MAJOR		23
-#define MITSUMI_CDROM_MAJOR	23
-#define CDU535_CDROM_MAJOR	24
-#define STL_SERIALMAJOR		24
-#define MATSUSHITA_CDROM_MAJOR	25
-#define STL_CALLOUTMAJOR	25
-#define MATSUSHITA_CDROM2_MAJOR	26
-#define QIC117_TAPE_MAJOR	27
-#define MATSUSHITA_CDROM3_MAJOR	27
-#define MATSUSHITA_CDROM4_MAJOR	28
-#define STL_SIOMEMMAJOR		28
-#define ACSI_MAJOR		28
-#define AZTECH_CDROM_MAJOR	29
-#define FB_MAJOR		29   /* /dev/fb* framebuffers */
-#define CM206_CDROM_MAJOR	32
-#define IDE2_MAJOR		33
-#define IDE3_MAJOR		34
-#define Z8530_MAJOR		34
-#define XPRAM_MAJOR		35   /* Expanded storage on S/390: "slow ram"*/
-#define NETLINK_MAJOR		36
-#define PS2ESDI_MAJOR		36
-#define IDETAPE_MAJOR		37
-#define Z2RAM_MAJOR		37
-#define APBLOCK_MAJOR		38   /* AP1000 Block device */
-#define DDV_MAJOR		39   /* AP1000 DDV block device */
-#define NBD_MAJOR		43   /* Network block device	*/
-#define RISCOM8_NORMAL_MAJOR	48
-#define DAC960_MAJOR		48   /* 48..55 */
-#define RISCOM8_CALLOUT_MAJOR	49
-#define MKISS_MAJOR		55
-#define DSP56K_MAJOR		55   /* DSP56001 processor device */
-
-#define IDE4_MAJOR		56
-#define IDE5_MAJOR		57
-
-#define SCSI_DISK1_MAJOR	65
-#define SCSI_DISK2_MAJOR	66
-#define SCSI_DISK3_MAJOR	67
-#define SCSI_DISK4_MAJOR	68
-#define SCSI_DISK5_MAJOR	69
-#define SCSI_DISK6_MAJOR	70
-#define SCSI_DISK7_MAJOR	71
-
-#define COMPAQ_SMART2_MAJOR	72
-#define COMPAQ_SMART2_MAJOR1	73
-#define COMPAQ_SMART2_MAJOR2	74
-#define COMPAQ_SMART2_MAJOR3	75
-#define COMPAQ_SMART2_MAJOR4	76
-#define COMPAQ_SMART2_MAJOR5	77
-#define COMPAQ_SMART2_MAJOR6	78
-#define COMPAQ_SMART2_MAJOR7	79
-
-#define SPECIALIX_NORMAL_MAJOR	75
-#define SPECIALIX_CALLOUT_MAJOR	76
-
-#define AURORA_MAJOR		79
-
-#define I2O_MAJOR		80	/* 80->87 */
-
-#define SHMIQ_MAJOR		85   /* Linux/mips, SGI /dev/shmiq */
-#define SCSI_CHANGER_MAJOR      86
-
-#define IDE6_MAJOR		88
-#define IDE7_MAJOR		89
-#define IDE8_MAJOR		90
-#define IDE9_MAJOR		91
-
-#define DASD_MAJOR		94
-
-#define MDISK_MAJOR		95
-
-#define UBD_MAJOR		98
-
-#define PP_MAJOR		99
-#define JSFD_MAJOR		99
-
-#define PHONE_MAJOR		100
-
-#define COMPAQ_CISS_MAJOR	104
-#define COMPAQ_CISS_MAJOR1	105
-#define COMPAQ_CISS_MAJOR2      106
-#define COMPAQ_CISS_MAJOR3      107
-#define COMPAQ_CISS_MAJOR4      108
-#define COMPAQ_CISS_MAJOR5      109
-#define COMPAQ_CISS_MAJOR6      110
-#define COMPAQ_CISS_MAJOR7      111
-
-#define VIODASD_MAJOR		112
-#define VIOCD_MAJOR		113
-
-#define ATARAID_MAJOR		114
-
-#define SCSI_DISK8_MAJOR	128
-#define SCSI_DISK9_MAJOR	129
-#define SCSI_DISK10_MAJOR	130
-#define SCSI_DISK11_MAJOR	131
-#define SCSI_DISK12_MAJOR	132
-#define SCSI_DISK13_MAJOR	133
-#define SCSI_DISK14_MAJOR	134
-#define SCSI_DISK15_MAJOR	135
-
-#define UNIX98_PTY_MASTER_MAJOR	128
-#define UNIX98_PTY_MAJOR_COUNT	8
-#define UNIX98_PTY_SLAVE_MAJOR	(UNIX98_PTY_MASTER_MAJOR+UNIX98_PTY_MAJOR_COUNT)
-
-#define DRBD_MAJOR		147
-#define RTF_MAJOR		150
-#define RAW_MAJOR		162
-
-#define USB_ACM_MAJOR		166
-#define USB_ACM_AUX_MAJOR	167
-#define USB_CHAR_MAJOR		180
-
-#define MMC_BLOCK_MAJOR		179
-
-#define VXVM_MAJOR		199	/* VERITAS volume i/o driver    */
-#define VXSPEC_MAJOR		200	/* VERITAS volume config driver */
-#define VXDMP_MAJOR		201	/* VERITAS volume multipath driver */
-
-#define XENVBD_MAJOR		202	/* Xen virtual block device */
-
-#define MSR_MAJOR		202
-#define CPUID_MAJOR		203
-
-#define OSST_MAJOR		206	/* OnStream-SCx0 SCSI tape */
-
-#define IBM_TTY3270_MAJOR	227
-#define IBM_FS3270_MAJOR	228
-
-#define VIOTAPE_MAJOR		230
-
-#define VD_MAJOR                236   /* For all Video Decoders & Encoders */
-#define CIPHER_MAJOR            238   /* For security engine */
-
-#define VID_MAJOR               241   /* For CMOS driver */
-#define MB_MAJOR                242   /* For WMT Memory Block driver */
-
-#define BLOCK_EXT_MAJOR		259
-#define SCSI_OSD_MAJOR		260	/* open-osd's OSD scsi device */
-#define CEC_MAJOR		261	/* for WMT HDMI CEC driver*/
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/map_to_7segment.h b/ANDROID_3.4.5/include/linux/map_to_7segment.h
deleted file mode 100644
index 12d62a54..00000000
--- a/ANDROID_3.4.5/include/linux/map_to_7segment.h
+++ /dev/null
@@ -1,187 +0,0 @@
-/*
- * Copyright (c) 2005 Henk Vergonet <Henk.Vergonet@gmail.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#ifndef MAP_TO_7SEGMENT_H
-#define MAP_TO_7SEGMENT_H
-
-/* This file provides translation primitives and tables for the conversion
- * of (ASCII) characters to a 7-segments notation.
- *
- * The 7 segment's wikipedia notation below is used as standard.
- * See: http://en.wikipedia.org/wiki/Seven_segment_display
- *
- * Notation:	+-a-+
- *		f   b
- *		+-g-+
- *		e   c
- *		+-d-+
- *
- * Usage:
- *
- *   Register a map variable, and fill it with a character set:
- *	static SEG7_DEFAULT_MAP(map_seg7);
- *
- *
- *   Then use for conversion:
- *	seg7 = map_to_seg7(&map_seg7, some_char);
- *	...
- *
- * In device drivers it is recommended, if required, to make the char map
- * accessible via the sysfs interface using the following scheme:
- *
- * static ssize_t show_map(struct device *dev, char *buf) {
- *	memcpy(buf, &map_seg7, sizeof(map_seg7));
- *	return sizeof(map_seg7);
- * }
- * static ssize_t store_map(struct device *dev, const char *buf, size_t cnt) {
- *	if(cnt != sizeof(map_seg7))
- *		return -EINVAL;
- *	memcpy(&map_seg7, buf, cnt);
- *	return cnt;
- * }
- * static DEVICE_ATTR(map_seg7, PERMS_RW, show_map, store_map);
- *
- * History:
- * 2005-05-31	RFC linux-kernel@vger.kernel.org
- */
-#include <linux/errno.h>
-
-
-#define BIT_SEG7_A		0
-#define BIT_SEG7_B		1
-#define BIT_SEG7_C		2
-#define BIT_SEG7_D		3
-#define BIT_SEG7_E		4
-#define BIT_SEG7_F		5
-#define BIT_SEG7_G		6
-#define BIT_SEG7_RESERVED	7
-
-struct seg7_conversion_map {
-	unsigned char	table[128];
-};
-
-static __inline__ int map_to_seg7(struct seg7_conversion_map *map, int c)
-{
-	return c >= 0 && c < sizeof(map->table) ? map->table[c] : -EINVAL;
-}
-
-#define SEG7_CONVERSION_MAP(_name, _map)	\
-	struct seg7_conversion_map _name = { .table = { _map } }
-
-/*
- * It is recommended to use a facility that allows user space to redefine
- * custom character sets for LCD devices. Please use a sysfs interface
- * as described above.
- */
-#define MAP_TO_SEG7_SYSFS_FILE	"map_seg7"
-
-/*******************************************************************************
- * ASCII conversion table
- ******************************************************************************/
-
-#define _SEG7(l,a,b,c,d,e,f,g)	\
-      (	a<<BIT_SEG7_A |	b<<BIT_SEG7_B |	c<<BIT_SEG7_C |	d<<BIT_SEG7_D |	\
-	e<<BIT_SEG7_E |	f<<BIT_SEG7_F |	g<<BIT_SEG7_G )
-
-#define _MAP_0_32_ASCII_SEG7_NON_PRINTABLE	\
-	0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
-
-#define _MAP_33_47_ASCII_SEG7_SYMBOL		\
- _SEG7('!',0,0,0,0,1,1,0), _SEG7('"',0,1,0,0,0,1,0), _SEG7('#',0,1,1,0,1,1,0),\
- _SEG7('$',1,0,1,1,0,1,1), _SEG7('%',0,0,1,0,0,1,0), _SEG7('&',1,0,1,1,1,1,1),\
- _SEG7('\'',0,0,0,0,0,1,0),_SEG7('(',1,0,0,1,1,1,0), _SEG7(')',1,1,1,1,0,0,0),\
- _SEG7('*',0,1,1,0,1,1,1), _SEG7('+',0,1,1,0,0,0,1), _SEG7(',',0,0,0,0,1,0,0),\
- _SEG7('-',0,0,0,0,0,0,1), _SEG7('.',0,0,0,0,1,0,0), _SEG7('/',0,1,0,0,1,0,1),
-
-#define _MAP_48_57_ASCII_SEG7_NUMERIC		\
- _SEG7('0',1,1,1,1,1,1,0), _SEG7('1',0,1,1,0,0,0,0), _SEG7('2',1,1,0,1,1,0,1),\
- _SEG7('3',1,1,1,1,0,0,1), _SEG7('4',0,1,1,0,0,1,1), _SEG7('5',1,0,1,1,0,1,1),\
- _SEG7('6',1,0,1,1,1,1,1), _SEG7('7',1,1,1,0,0,0,0), _SEG7('8',1,1,1,1,1,1,1),\
- _SEG7('9',1,1,1,1,0,1,1),
-
-#define _MAP_58_64_ASCII_SEG7_SYMBOL		\
- _SEG7(':',0,0,0,1,0,0,1), _SEG7(';',0,0,0,1,0,0,1), _SEG7('<',1,0,0,0,0,1,1),\
- _SEG7('=',0,0,0,1,0,0,1), _SEG7('>',1,1,0,0,0,0,1), _SEG7('?',1,1,1,0,0,1,0),\
- _SEG7('@',1,1,0,1,1,1,1),
-
-#define _MAP_65_90_ASCII_SEG7_ALPHA_UPPR	\
- _SEG7('A',1,1,1,0,1,1,1), _SEG7('B',1,1,1,1,1,1,1), _SEG7('C',1,0,0,1,1,1,0),\
- _SEG7('D',1,1,1,1,1,1,0), _SEG7('E',1,0,0,1,1,1,1), _SEG7('F',1,0,0,0,1,1,1),\
- _SEG7('G',1,1,1,1,0,1,1), _SEG7('H',0,1,1,0,1,1,1), _SEG7('I',0,1,1,0,0,0,0),\
- _SEG7('J',0,1,1,1,0,0,0), _SEG7('K',0,1,1,0,1,1,1), _SEG7('L',0,0,0,1,1,1,0),\
- _SEG7('M',1,1,1,0,1,1,0), _SEG7('N',1,1,1,0,1,1,0), _SEG7('O',1,1,1,1,1,1,0),\
- _SEG7('P',1,1,0,0,1,1,1), _SEG7('Q',1,1,1,1,1,1,0), _SEG7('R',1,1,1,0,1,1,1),\
- _SEG7('S',1,0,1,1,0,1,1), _SEG7('T',0,0,0,1,1,1,1), _SEG7('U',0,1,1,1,1,1,0),\
- _SEG7('V',0,1,1,1,1,1,0), _SEG7('W',0,1,1,1,1,1,1), _SEG7('X',0,1,1,0,1,1,1),\
- _SEG7('Y',0,1,1,0,0,1,1), _SEG7('Z',1,1,0,1,1,0,1),
-
-#define _MAP_91_96_ASCII_SEG7_SYMBOL		\
- _SEG7('[',1,0,0,1,1,1,0), _SEG7('\\',0,0,1,0,0,1,1),_SEG7(']',1,1,1,1,0,0,0),\
- _SEG7('^',1,1,0,0,0,1,0), _SEG7('_',0,0,0,1,0,0,0), _SEG7('`',0,1,0,0,0,0,0),
-
-#define _MAP_97_122_ASCII_SEG7_ALPHA_LOWER	\
- _SEG7('A',1,1,1,0,1,1,1), _SEG7('b',0,0,1,1,1,1,1), _SEG7('c',0,0,0,1,1,0,1),\
- _SEG7('d',0,1,1,1,1,0,1), _SEG7('E',1,0,0,1,1,1,1), _SEG7('F',1,0,0,0,1,1,1),\
- _SEG7('G',1,1,1,1,0,1,1), _SEG7('h',0,0,1,0,1,1,1), _SEG7('i',0,0,1,0,0,0,0),\
- _SEG7('j',0,0,1,1,0,0,0), _SEG7('k',0,0,1,0,1,1,1), _SEG7('L',0,0,0,1,1,1,0),\
- _SEG7('M',1,1,1,0,1,1,0), _SEG7('n',0,0,1,0,1,0,1), _SEG7('o',0,0,1,1,1,0,1),\
- _SEG7('P',1,1,0,0,1,1,1), _SEG7('q',1,1,1,0,0,1,1), _SEG7('r',0,0,0,0,1,0,1),\
- _SEG7('S',1,0,1,1,0,1,1), _SEG7('T',0,0,0,1,1,1,1), _SEG7('u',0,0,1,1,1,0,0),\
- _SEG7('v',0,0,1,1,1,0,0), _SEG7('W',0,1,1,1,1,1,1), _SEG7('X',0,1,1,0,1,1,1),\
- _SEG7('y',0,1,1,1,0,1,1), _SEG7('Z',1,1,0,1,1,0,1),
-
-#define _MAP_123_126_ASCII_SEG7_SYMBOL		\
- _SEG7('{',1,0,0,1,1,1,0), _SEG7('|',0,0,0,0,1,1,0), _SEG7('}',1,1,1,1,0,0,0),\
- _SEG7('~',1,0,0,0,0,0,0),
-
-/* Maps */
-
-/* This set tries to map as close as possible to the visible characteristics
- * of the ASCII symbol, lowercase and uppercase letters may differ in
- * presentation on the display.
- */
-#define MAP_ASCII7SEG_ALPHANUM			\
-	_MAP_0_32_ASCII_SEG7_NON_PRINTABLE	\
-	_MAP_33_47_ASCII_SEG7_SYMBOL		\
-	_MAP_48_57_ASCII_SEG7_NUMERIC		\
-	_MAP_58_64_ASCII_SEG7_SYMBOL		\
-	_MAP_65_90_ASCII_SEG7_ALPHA_UPPR	\
-	_MAP_91_96_ASCII_SEG7_SYMBOL		\
-	_MAP_97_122_ASCII_SEG7_ALPHA_LOWER	\
-	_MAP_123_126_ASCII_SEG7_SYMBOL
-
-/* This set tries to map as close as possible to the symbolic characteristics
- * of the ASCII character for maximum discrimination.
- * For now this means all alpha chars are in lower case representations.
- * (This for example facilitates the use of hex numbers with uppercase input.)
- */
-#define MAP_ASCII7SEG_ALPHANUM_LC			\
-	_MAP_0_32_ASCII_SEG7_NON_PRINTABLE	\
-	_MAP_33_47_ASCII_SEG7_SYMBOL		\
-	_MAP_48_57_ASCII_SEG7_NUMERIC		\
-	_MAP_58_64_ASCII_SEG7_SYMBOL		\
-	_MAP_97_122_ASCII_SEG7_ALPHA_LOWER	\
-	_MAP_91_96_ASCII_SEG7_SYMBOL		\
-	_MAP_97_122_ASCII_SEG7_ALPHA_LOWER	\
-	_MAP_123_126_ASCII_SEG7_SYMBOL
-
-#define SEG7_DEFAULT_MAP(_name)		\
-	SEG7_CONVERSION_MAP(_name,MAP_ASCII7SEG_ALPHANUM)
-
-#endif	/* MAP_TO_7SEGMENT_H */
-
diff --git a/ANDROID_3.4.5/include/linux/maple.h b/ANDROID_3.4.5/include/linux/maple.h
deleted file mode 100644
index c37288b2..00000000
--- a/ANDROID_3.4.5/include/linux/maple.h
+++ /dev/null
@@ -1,105 +0,0 @@
-#ifndef __LINUX_MAPLE_H
-#define __LINUX_MAPLE_H
-
-#include <mach/maple.h>
-
-struct device;
-extern struct bus_type maple_bus_type;
-
-/* Maple Bus command and response codes */
-enum maple_code {
-	MAPLE_RESPONSE_FILEERR =	-5,
-	MAPLE_RESPONSE_AGAIN,	/* retransmit */
-	MAPLE_RESPONSE_BADCMD,
-	MAPLE_RESPONSE_BADFUNC,
-	MAPLE_RESPONSE_NONE,	/* unit didn't respond*/
-	MAPLE_COMMAND_DEVINFO =		1,
-	MAPLE_COMMAND_ALLINFO,
-	MAPLE_COMMAND_RESET,
-	MAPLE_COMMAND_KILL,
-	MAPLE_RESPONSE_DEVINFO,
-	MAPLE_RESPONSE_ALLINFO,
-	MAPLE_RESPONSE_OK,
-	MAPLE_RESPONSE_DATATRF,
-	MAPLE_COMMAND_GETCOND,
-	MAPLE_COMMAND_GETMINFO,
-	MAPLE_COMMAND_BREAD,
-	MAPLE_COMMAND_BWRITE,
-	MAPLE_COMMAND_BSYNC,
-	MAPLE_COMMAND_SETCOND,
-	MAPLE_COMMAND_MICCONTROL
-};
-
-enum maple_file_errors {
-	MAPLE_FILEERR_INVALID_PARTITION =	0x01000000,
-	MAPLE_FILEERR_PHASE_ERROR =		0x02000000,
-	MAPLE_FILEERR_INVALID_BLOCK =		0x04000000,
-	MAPLE_FILEERR_WRITE_ERROR =		0x08000000,
-	MAPLE_FILEERR_INVALID_WRITE_LENGTH =	0x10000000,
-	MAPLE_FILEERR_BAD_CRC = 		0x20000000
-};
-
-struct maple_buffer {
-	char bufx[0x400];
-	void *buf;
-};
-
-struct mapleq {
-	struct list_head list;
-	struct maple_device *dev;
-	struct maple_buffer *recvbuf;
-	void *sendbuf, *recvbuf_p2;
-	unsigned char length;
-	enum maple_code command;
-};
-
-struct maple_devinfo {
-	unsigned long function;
-	unsigned long function_data[3];
-	unsigned char area_code;
-	unsigned char connector_direction;
-	char product_name[31];
-	char product_licence[61];
-	unsigned short standby_power;
-	unsigned short max_power;
-};
-
-struct maple_device {
-	struct maple_driver *driver;
-	struct mapleq *mq;
-	void (*callback) (struct mapleq * mq);
-	void (*fileerr_handler)(struct maple_device *mdev, void *recvbuf);
-	int (*can_unload)(struct maple_device *mdev);
-	unsigned long when, interval, function;
-	struct maple_devinfo devinfo;
-	unsigned char port, unit;
-	char product_name[32];
-	char product_licence[64];
-	atomic_t busy;
-	wait_queue_head_t maple_wait;
-	struct device dev;
-};
-
-struct maple_driver {
-	unsigned long function;
-	struct device_driver drv;
-};
-
-void maple_getcond_callback(struct maple_device *dev,
-			    void (*callback) (struct mapleq * mq),
-			    unsigned long interval,
-			    unsigned long function);
-int maple_driver_register(struct maple_driver *);
-void maple_driver_unregister(struct maple_driver *);
-
-int maple_add_packet(struct maple_device *mdev, u32 function,
-	u32 command, u32 length, void *data);
-void maple_clear_dev(struct maple_device *mdev);
-
-#define to_maple_dev(n) container_of(n, struct maple_device, dev)
-#define to_maple_driver(n) container_of(n, struct maple_driver, drv)
-
-#define maple_get_drvdata(d)		dev_get_drvdata(&(d)->dev)
-#define maple_set_drvdata(d,p)		dev_set_drvdata(&(d)->dev, (p))
-
-#endif				/* __LINUX_MAPLE_H */
diff --git a/ANDROID_3.4.5/include/linux/marvell_phy.h b/ANDROID_3.4.5/include/linux/marvell_phy.h
deleted file mode 100644
index dd3c34eb..00000000
--- a/ANDROID_3.4.5/include/linux/marvell_phy.h
+++ /dev/null
@@ -1,22 +0,0 @@
-#ifndef _MARVELL_PHY_H
-#define _MARVELL_PHY_H
-
-/* Mask used for ID comparisons */
-#define MARVELL_PHY_ID_MASK		0xfffffff0
-
-/* Known PHY IDs */
-#define MARVELL_PHY_ID_88E1101		0x01410c60
-#define MARVELL_PHY_ID_88E1112		0x01410c90
-#define MARVELL_PHY_ID_88E1111		0x01410cc0
-#define MARVELL_PHY_ID_88E1118		0x01410e10
-#define MARVELL_PHY_ID_88E1121R		0x01410cb0
-#define MARVELL_PHY_ID_88E1145		0x01410cd0
-#define MARVELL_PHY_ID_88E1149R		0x01410e50
-#define MARVELL_PHY_ID_88E1240		0x01410e30
-#define MARVELL_PHY_ID_88E1318S		0x01410e90
-
-/* struct phy_device dev_flags definitions */
-#define MARVELL_PHY_M1145_FLAGS_RESISTANCE	0x00000001
-#define MARVELL_PHY_M1118_DNS323_LEDS		0x00000002
-
-#endif /* _MARVELL_PHY_H */
diff --git a/ANDROID_3.4.5/include/linux/math64.h b/ANDROID_3.4.5/include/linux/math64.h
deleted file mode 100644
index b8ba8554..00000000
--- a/ANDROID_3.4.5/include/linux/math64.h
+++ /dev/null
@@ -1,121 +0,0 @@
-#ifndef _LINUX_MATH64_H
-#define _LINUX_MATH64_H
-
-#include <linux/types.h>
-#include <asm/div64.h>
-
-#if BITS_PER_LONG == 64
-
-#define div64_long(x,y) div64_s64((x),(y))
-
-/**
- * div_u64_rem - unsigned 64bit divide with 32bit divisor with remainder
- *
- * This is commonly provided by 32bit archs to provide an optimized 64bit
- * divide.
- */
-static inline u64 div_u64_rem(u64 dividend, u32 divisor, u32 *remainder)
-{
-	*remainder = dividend % divisor;
-	return dividend / divisor;
-}
-
-/**
- * div_s64_rem - signed 64bit divide with 32bit divisor with remainder
- */
-static inline s64 div_s64_rem(s64 dividend, s32 divisor, s32 *remainder)
-{
-	*remainder = dividend % divisor;
-	return dividend / divisor;
-}
-
-/**
- * div64_u64 - unsigned 64bit divide with 64bit divisor
- */
-static inline u64 div64_u64(u64 dividend, u64 divisor)
-{
-	return dividend / divisor;
-}
-
-/**
- * div64_s64 - signed 64bit divide with 64bit divisor
- */
-static inline s64 div64_s64(s64 dividend, s64 divisor)
-{
-	return dividend / divisor;
-}
-
-#elif BITS_PER_LONG == 32
-
-#define div64_long(x,y) div_s64((x),(y))
-
-#ifndef div_u64_rem
-static inline u64 div_u64_rem(u64 dividend, u32 divisor, u32 *remainder)
-{
-	*remainder = do_div(dividend, divisor);
-	return dividend;
-}
-#endif
-
-#ifndef div_s64_rem
-extern s64 div_s64_rem(s64 dividend, s32 divisor, s32 *remainder);
-#endif
-
-#ifndef div64_u64
-extern u64 div64_u64(u64 dividend, u64 divisor);
-#endif
-
-#ifndef div64_s64
-extern s64 div64_s64(s64 dividend, s64 divisor);
-#endif
-
-#endif /* BITS_PER_LONG */
-
-/**
- * div_u64 - unsigned 64bit divide with 32bit divisor
- *
- * This is the most common 64bit divide and should be used if possible,
- * as many 32bit archs can optimize this variant better than a full 64bit
- * divide.
- */
-#ifndef div_u64
-static inline u64 div_u64(u64 dividend, u32 divisor)
-{
-	u32 remainder;
-	return div_u64_rem(dividend, divisor, &remainder);
-}
-#endif
-
-/**
- * div_s64 - signed 64bit divide with 32bit divisor
- */
-#ifndef div_s64
-static inline s64 div_s64(s64 dividend, s32 divisor)
-{
-	s32 remainder;
-	return div_s64_rem(dividend, divisor, &remainder);
-}
-#endif
-
-u32 iter_div_u64_rem(u64 dividend, u32 divisor, u64 *remainder);
-
-static __always_inline u32
-__iter_div_u64_rem(u64 dividend, u32 divisor, u64 *remainder)
-{
-	u32 ret = 0;
-
-	while (dividend >= divisor) {
-		/* The following asm() prevents the compiler from
-		   optimising this loop into a modulo operation.  */
-		asm("" : "+rm"(dividend));
-
-		dividend -= divisor;
-		ret++;
-	}
-
-	*remainder = dividend;
-
-	return ret;
-}
-
-#endif /* _LINUX_MATH64_H */
diff --git a/ANDROID_3.4.5/include/linux/matroxfb.h b/ANDROID_3.4.5/include/linux/matroxfb.h
deleted file mode 100644
index 8c22a893..00000000
--- a/ANDROID_3.4.5/include/linux/matroxfb.h
+++ /dev/null
@@ -1,42 +0,0 @@
-#ifndef __LINUX_MATROXFB_H__
-#define __LINUX_MATROXFB_H__
-
-#include <asm/ioctl.h>
-#include <linux/types.h>
-#include <linux/videodev2.h>
-#include <linux/fb.h>
-
-struct matroxioc_output_mode {
-	__u32	output;		/* which output */
-#define MATROXFB_OUTPUT_PRIMARY		0x0000
-#define MATROXFB_OUTPUT_SECONDARY	0x0001
-#define MATROXFB_OUTPUT_DFP		0x0002
-	__u32	mode;		/* which mode */
-#define MATROXFB_OUTPUT_MODE_PAL	0x0001
-#define MATROXFB_OUTPUT_MODE_NTSC	0x0002
-#define MATROXFB_OUTPUT_MODE_MONITOR	0x0080
-};
-#define MATROXFB_SET_OUTPUT_MODE	_IOW('n',0xFA,size_t)
-#define MATROXFB_GET_OUTPUT_MODE	_IOWR('n',0xFA,size_t)
-
-/* bitfield */
-#define MATROXFB_OUTPUT_CONN_PRIMARY	(1 << MATROXFB_OUTPUT_PRIMARY)
-#define MATROXFB_OUTPUT_CONN_SECONDARY	(1 << MATROXFB_OUTPUT_SECONDARY)
-#define MATROXFB_OUTPUT_CONN_DFP	(1 << MATROXFB_OUTPUT_DFP)
-/* connect these outputs to this framebuffer */
-#define MATROXFB_SET_OUTPUT_CONNECTION	_IOW('n',0xF8,size_t)
-/* which outputs are connected to this framebuffer */
-#define MATROXFB_GET_OUTPUT_CONNECTION	_IOR('n',0xF8,size_t)
-/* which outputs are available for this framebuffer */
-#define MATROXFB_GET_AVAILABLE_OUTPUTS	_IOR('n',0xF9,size_t)
-/* which outputs exist on this framebuffer */
-#define MATROXFB_GET_ALL_OUTPUTS	_IOR('n',0xFB,size_t)
-
-enum matroxfb_ctrl_id {
-  MATROXFB_CID_TESTOUT	 = V4L2_CID_PRIVATE_BASE,
-  MATROXFB_CID_DEFLICKER,
-  MATROXFB_CID_LAST
-};
-
-#endif
-
diff --git a/ANDROID_3.4.5/include/linux/max17040_battery.h b/ANDROID_3.4.5/include/linux/max17040_battery.h
deleted file mode 100644
index ad97b06c..00000000
--- a/ANDROID_3.4.5/include/linux/max17040_battery.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- *  Copyright (C) 2009 Samsung Electronics
- *  Minkyu Kang <mk7.kang@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __MAX17040_BATTERY_H_
-#define __MAX17040_BATTERY_H_
-
-struct max17040_platform_data {
-	int (*battery_online)(void);
-	int (*charger_online)(void);
-	int (*charger_enable)(void);
-};
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/mbcache.h b/ANDROID_3.4.5/include/linux/mbcache.h
deleted file mode 100644
index 5525d370..00000000
--- a/ANDROID_3.4.5/include/linux/mbcache.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
-  File: linux/mbcache.h
-
-  (C) 2001 by Andreas Gruenbacher, <a.gruenbacher@computer.org>
-*/
-
-struct mb_cache_entry {
-	struct list_head		e_lru_list;
-	struct mb_cache			*e_cache;
-	unsigned short			e_used;
-	unsigned short			e_queued;
-	struct block_device		*e_bdev;
-	sector_t			e_block;
-	struct list_head		e_block_list;
-	struct {
-		struct list_head	o_list;
-		unsigned int		o_key;
-	} e_index;
-};
-
-struct mb_cache {
-	struct list_head		c_cache_list;
-	const char			*c_name;
-	atomic_t			c_entry_count;
-	int				c_max_entries;
-	int				c_bucket_bits;
-	struct kmem_cache		*c_entry_cache;
-	struct list_head		*c_block_hash;
-	struct list_head		*c_index_hash;
-};
-
-/* Functions on caches */
-
-struct mb_cache *mb_cache_create(const char *, int);
-void mb_cache_shrink(struct block_device *);
-void mb_cache_destroy(struct mb_cache *);
-
-/* Functions on cache entries */
-
-struct mb_cache_entry *mb_cache_entry_alloc(struct mb_cache *, gfp_t);
-int mb_cache_entry_insert(struct mb_cache_entry *, struct block_device *,
-			  sector_t, unsigned int);
-void mb_cache_entry_release(struct mb_cache_entry *);
-void mb_cache_entry_free(struct mb_cache_entry *);
-struct mb_cache_entry *mb_cache_entry_get(struct mb_cache *,
-					  struct block_device *,
-					  sector_t);
-struct mb_cache_entry *mb_cache_entry_find_first(struct mb_cache *cache,
-						 struct block_device *, 
-						 unsigned int);
-struct mb_cache_entry *mb_cache_entry_find_next(struct mb_cache_entry *,
-						struct block_device *, 
-						unsigned int);
diff --git a/ANDROID_3.4.5/include/linux/mbus.h b/ANDROID_3.4.5/include/linux/mbus.h
deleted file mode 100644
index efa1a6d7..00000000
--- a/ANDROID_3.4.5/include/linux/mbus.h
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- * Marvell MBUS common definitions.
- *
- * Copyright (C) 2008 Marvell Semiconductor
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __LINUX_MBUS_H
-#define __LINUX_MBUS_H
-
-struct mbus_dram_target_info
-{
-	/*
-	 * The 4-bit MBUS target ID of the DRAM controller.
-	 */
-	u8		mbus_dram_target_id;
-
-	/*
-	 * The base address, size, and MBUS attribute ID for each
-	 * of the possible DRAM chip selects.  Peripherals are
-	 * required to support at least 4 decode windows.
-	 */
-	int		num_cs;
-	struct mbus_dram_window {
-		u8	cs_index;
-		u8	mbus_attr;
-		u32	base;
-		u32	size;
-	} cs[4];
-};
-
-/*
- * The Marvell mbus is to be found only on SOCs from the Orion family
- * at the moment.  Provide a dummy stub for other architectures.
- */
-#ifdef CONFIG_PLAT_ORION
-extern const struct mbus_dram_target_info *mv_mbus_dram_info(void);
-#else
-static inline const struct mbus_dram_target_info *mv_mbus_dram_info(void)
-{
-	return NULL;
-}
-#endif
-#endif
diff --git a/ANDROID_3.4.5/include/linux/mc146818rtc.h b/ANDROID_3.4.5/include/linux/mc146818rtc.h
deleted file mode 100644
index 2f4e957a..00000000
--- a/ANDROID_3.4.5/include/linux/mc146818rtc.h
+++ /dev/null
@@ -1,119 +0,0 @@
-/* mc146818rtc.h - register definitions for the Real-Time-Clock / CMOS RAM
- * Copyright Torsten Duwe <duwe@informatik.uni-erlangen.de> 1993
- * derived from Data Sheet, Copyright Motorola 1984 (!).
- * It was written to be part of the Linux operating system.
- */
-/* permission is hereby granted to copy, modify and redistribute this code
- * in terms of the GNU Library General Public License, Version 2 or later,
- * at your option.
- */
-
-#ifndef _MC146818RTC_H
-#define _MC146818RTC_H
-
-#include <asm/io.h>
-#include <linux/rtc.h>			/* get the user-level API */
-#include <asm/mc146818rtc.h>		/* register access macros */
-
-#ifdef __KERNEL__
-#include <linux/spinlock.h>		/* spinlock_t */
-extern spinlock_t rtc_lock;		/* serialize CMOS RAM access */
-
-/* Some RTCs extend the mc146818 register set to support alarms of more
- * than 24 hours in the future; or dates that include a century code.
- * This platform_data structure can pass this information to the driver.
- *
- * Also, some platforms need suspend()/resume() hooks to kick in special
- * handling of wake alarms, e.g. activating ACPI BIOS hooks or setting up
- * a separate wakeup alarm used by some almost-clone chips.
- */
-struct cmos_rtc_board_info {
-	void	(*wake_on)(struct device *dev);
-	void	(*wake_off)(struct device *dev);
-
-	u8	rtc_day_alarm;		/* zero, or register index */
-	u8	rtc_mon_alarm;		/* zero, or register index */
-	u8	rtc_century;		/* zero, or register index */
-};
-#endif
-
-/**********************************************************************
- * register summary
- **********************************************************************/
-#define RTC_SECONDS		0
-#define RTC_SECONDS_ALARM	1
-#define RTC_MINUTES		2
-#define RTC_MINUTES_ALARM	3
-#define RTC_HOURS		4
-#define RTC_HOURS_ALARM		5
-/* RTC_*_alarm is always true if 2 MSBs are set */
-# define RTC_ALARM_DONT_CARE 	0xC0
-
-#define RTC_DAY_OF_WEEK		6
-#define RTC_DAY_OF_MONTH	7
-#define RTC_MONTH		8
-#define RTC_YEAR		9
-
-/* control registers - Moto names
- */
-#define RTC_REG_A		10
-#define RTC_REG_B		11
-#define RTC_REG_C		12
-#define RTC_REG_D		13
-
-/**********************************************************************
- * register details
- **********************************************************************/
-#define RTC_FREQ_SELECT	RTC_REG_A
-
-/* update-in-progress  - set to "1" 244 microsecs before RTC goes off the bus,
- * reset after update (may take 1.984ms @ 32768Hz RefClock) is complete,
- * totalling to a max high interval of 2.228 ms.
- */
-# define RTC_UIP		0x80
-# define RTC_DIV_CTL		0x70
-   /* divider control: refclock values 4.194 / 1.049 MHz / 32.768 kHz */
-#  define RTC_REF_CLCK_4MHZ	0x00
-#  define RTC_REF_CLCK_1MHZ	0x10
-#  define RTC_REF_CLCK_32KHZ	0x20
-   /* 2 values for divider stage reset, others for "testing purposes only" */
-#  define RTC_DIV_RESET1	0x60
-#  define RTC_DIV_RESET2	0x70
-  /* Periodic intr. / Square wave rate select. 0=none, 1=32.8kHz,... 15=2Hz */
-# define RTC_RATE_SELECT 	0x0F
-
-/**********************************************************************/
-#define RTC_CONTROL	RTC_REG_B
-# define RTC_SET 0x80		/* disable updates for clock setting */
-# define RTC_PIE 0x40		/* periodic interrupt enable */
-# define RTC_AIE 0x20		/* alarm interrupt enable */
-# define RTC_UIE 0x10		/* update-finished interrupt enable */
-# define RTC_SQWE 0x08		/* enable square-wave output */
-# define RTC_DM_BINARY 0x04	/* all time/date values are BCD if clear */
-# define RTC_24H 0x02		/* 24 hour mode - else hours bit 7 means pm */
-# define RTC_DST_EN 0x01	/* auto switch DST - works f. USA only */
-
-/**********************************************************************/
-#define RTC_INTR_FLAGS	RTC_REG_C
-/* caution - cleared by read */
-# define RTC_IRQF 0x80		/* any of the following 3 is active */
-# define RTC_PF 0x40
-# define RTC_AF 0x20
-# define RTC_UF 0x10
-
-/**********************************************************************/
-#define RTC_VALID	RTC_REG_D
-# define RTC_VRT 0x80		/* valid RAM and time */
-/**********************************************************************/
-
-#ifndef ARCH_RTC_LOCATION	/* Override by <asm/mc146818rtc.h>? */
-
-#define RTC_IO_EXTENT	0x8
-#define RTC_IO_EXTENT_USED	0x2
-#define RTC_IOMAPPED	1	/* Default to I/O mapping. */
-
-#else
-#define RTC_IO_EXTENT_USED      RTC_IO_EXTENT
-#endif /* ARCH_RTC_LOCATION */
-
-#endif /* _MC146818RTC_H */
diff --git a/ANDROID_3.4.5/include/linux/mc6821.h b/ANDROID_3.4.5/include/linux/mc6821.h
deleted file mode 100644
index 28e301e2..00000000
--- a/ANDROID_3.4.5/include/linux/mc6821.h
+++ /dev/null
@@ -1,51 +0,0 @@
-#ifndef _MC6821_H_
-#define _MC6821_H_
-
-/*
- * This file describes the memery mapping of the MC6821 PIA.
- * The unions describe overlayed registers. Which of them is used is
- * determined by bit 2 of the corresponding control register.
- * this files expects the PIA_REG_PADWIDTH to be defined the numeric
- * value of the register spacing.
- *
- * Data came from MFC-31-Developer Kit (from Ralph Seidel,
- * zodiac@darkness.gun.de) and Motorola Data Sheet (from 
- * Richard Hirst, srh@gpt.co.uk)
- *
- * 6.11.95 copyright Joerg Dorchain (dorchain@mpi-sb.mpg.de)
- *
- */
-
-#ifndef PIA_REG_PADWIDTH
-#define PIA_REG_PADWIDTH 255
-#endif
-
-struct pia {
-	union {
-		volatile u_char pra;
-		volatile u_char ddra;
-	} ua;
-	u_char pad1[PIA_REG_PADWIDTH];
-	volatile u_char cra;
-	u_char pad2[PIA_REG_PADWIDTH];
-	union {
-		volatile u_char prb;
-		volatile u_char ddrb;
-	} ub;
-	u_char pad3[PIA_REG_PADWIDTH];
-	volatile u_char crb;
-	u_char pad4[PIA_REG_PADWIDTH];
-};
-
-#define ppra ua.pra
-#define pddra ua.ddra
-#define pprb ub.prb
-#define pddrb ub.ddrb
-
-#define PIA_C1_ENABLE_IRQ (1<<0)
-#define PIA_C1_LOW_TO_HIGH (1<<1)
-#define PIA_DDR (1<<2)
-#define PIA_IRQ2 (1<<6)
-#define PIA_IRQ1 (1<<7)
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/mca-legacy.h b/ANDROID_3.4.5/include/linux/mca-legacy.h
deleted file mode 100644
index 7a3aea84..00000000
--- a/ANDROID_3.4.5/include/linux/mca-legacy.h
+++ /dev/null
@@ -1,66 +0,0 @@
-/* -*- mode: c; c-basic-offset: 8 -*- */
-
-/* This is the function prototypes for the old legacy MCA interface
- *
- * Please move your driver to the new sysfs based one instead */
-
-#ifndef _LINUX_MCA_LEGACY_H
-#define _LINUX_MCA_LEGACY_H
-
-#include <linux/mca.h>
-
-#warning "MCA legacy - please move your driver to the new sysfs api"
-
-/* MCA_NOTFOUND is an error condition.  The other two indicate
- * motherboard POS registers contain the adapter.  They might be
- * returned by the mca_find_adapter() function, and can be used as
- * arguments to mca_read_stored_pos().  I'm not going to allow direct
- * access to the motherboard registers until we run across an adapter
- * that requires it.  We don't know enough about them to know if it's
- * safe.
- *
- * See Documentation/mca.txt or one of the existing drivers for
- * more information.
- */
-#define MCA_NOTFOUND	(-1)
-
-
-
-/* Returns the slot of the first enabled adapter matching id.  User can
- * specify a starting slot beyond zero, to deal with detecting multiple
- * devices.  Returns MCA_NOTFOUND if id not found.  Also checks the
- * integrated adapters.
- */
-extern int mca_find_adapter(int id, int start);
-extern int mca_find_unused_adapter(int id, int start);
-
-extern int mca_mark_as_used(int slot);
-extern void mca_mark_as_unused(int slot);
-
-/* gets a byte out of POS register (stored in memory) */
-extern unsigned char mca_read_stored_pos(int slot, int reg);
-
-/* This can be expanded later.  Right now, it gives us a way of
- * getting meaningful information into the MCA_info structure,
- * so we can have a more interesting /proc/mca.
- */
-extern void mca_set_adapter_name(int slot, char* name);
-
-/* These routines actually mess with the hardware POS registers.  They
- * temporarily disable the device (and interrupts), so make sure you know
- * what you're doing if you use them.  Furthermore, writing to a POS may
- * result in two devices trying to share a resource, which in turn can
- * result in multiple devices sharing memory spaces, IRQs, or even trashing
- * hardware.  YOU HAVE BEEN WARNED.
- *
- * You can only access slots with this.  Motherboard registers are off
- * limits.
- */
-
-/* read a byte from the specified POS register. */
-extern unsigned char mca_read_pos(int slot, int reg);
-
-/* write a byte to the specified POS register. */
-extern void mca_write_pos(int slot, int reg, unsigned char byte);
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/mca.h b/ANDROID_3.4.5/include/linux/mca.h
deleted file mode 100644
index 37972704..00000000
--- a/ANDROID_3.4.5/include/linux/mca.h
+++ /dev/null
@@ -1,148 +0,0 @@
-/*
- * Header for Microchannel Architecture Bus
- * Written by Martin Kolinek, February 1996
- */
-
-#ifndef _LINUX_MCA_H
-#define _LINUX_MCA_H
-
-#include <linux/device.h>
-
-#ifdef CONFIG_MCA
-#include <asm/mca.h>
-
-extern int MCA_bus;
-#else
-#define MCA_bus 0
-#endif
-
-/* This sets up an information callback for /proc/mca/slot?.  The
- * function is called with the buffer, slot, and device pointer (or
- * some equally informative context information, or nothing, if you
- * prefer), and is expected to put useful information into the
- * buffer.  The adapter name, id, and POS registers get printed
- * before this is called though, so don't do it again.
- *
- * This should be called with a NULL procfn when a module
- * unregisters, thus preventing kernel crashes and other such
- * nastiness.
- */
-typedef int (*MCA_ProcFn)(char* buf, int slot, void* dev);
-
-/* Should only be called by the NMI interrupt handler, this will do some
- * fancy stuff to figure out what might have generated a NMI.
- */
-extern void mca_handle_nmi(void);
-
-enum MCA_AdapterStatus {
-	MCA_ADAPTER_NORMAL = 0,
-	MCA_ADAPTER_NONE = 1,
-	MCA_ADAPTER_DISABLED = 2,
-	MCA_ADAPTER_ERROR = 3
-};
-
-struct mca_device {
-	u64			dma_mask;
-	int			pos_id;
-	int			slot;
-
-	/* index into id_table, set by the bus match routine */
-	int			index;
-
-	/* is there a driver installed? 0 - No, 1 - Yes */
-	int			driver_loaded;
-	/* POS registers */
-	unsigned char		pos[8];
-	/* if a pseudo adapter of the motherboard, this is the motherboard
-	 * register value to use for setup cycles */
-	short			pos_register;
-	
-	enum MCA_AdapterStatus	status;
-#ifdef CONFIG_MCA_PROC_FS
-	/* name of the proc/mca file */
-	char			procname[8];
-	/* /proc info callback */
-	MCA_ProcFn		procfn;
-	/* device/context info for proc callback */
-	void			*proc_dev;
-#endif
-	struct device		dev;
-	char			name[32];
-};
-#define to_mca_device(mdev) container_of(mdev, struct mca_device, dev)
-
-struct mca_bus_accessor_functions {
-	unsigned char	(*mca_read_pos)(struct mca_device *, int reg);
-	void		(*mca_write_pos)(struct mca_device *, int reg,
-					 unsigned char byte);
-	int		(*mca_transform_irq)(struct mca_device *, int irq);
-	int		(*mca_transform_ioport)(struct mca_device *,
-						  int region);
-	void *		(*mca_transform_memory)(struct mca_device *,
-						void *memory);
-};
-
-struct mca_bus {
-	u64			default_dma_mask;
-	int			number;
-	struct mca_bus_accessor_functions f;
-	struct device		dev;
-	char			name[32];
-};
-#define to_mca_bus(mdev) container_of(mdev, struct mca_bus, dev)
-
-struct mca_driver {
-	const short		*id_table;
-	void			*driver_data;
-	int			integrated_id;
-	struct device_driver	driver;
-};
-#define to_mca_driver(mdriver) container_of(mdriver, struct mca_driver, driver)
-
-/* Ongoing supported API functions */
-extern struct mca_device *mca_find_device_by_slot(int slot);
-extern int mca_system_init(void);
-extern struct mca_bus *mca_attach_bus(int);
-
-extern unsigned char mca_device_read_stored_pos(struct mca_device *mca_dev,
-						int reg);
-extern unsigned char mca_device_read_pos(struct mca_device *mca_dev, int reg);
-extern void mca_device_write_pos(struct mca_device *mca_dev, int reg,
-				 unsigned char byte);
-extern int mca_device_transform_irq(struct mca_device *mca_dev, int irq);
-extern int mca_device_transform_ioport(struct mca_device *mca_dev, int port);
-extern void *mca_device_transform_memory(struct mca_device *mca_dev,
-					 void *mem);
-extern int mca_device_claimed(struct mca_device *mca_dev);
-extern void mca_device_set_claim(struct mca_device *mca_dev, int val);
-extern void mca_device_set_name(struct mca_device *mca_dev, const char *name);
-static inline char *mca_device_get_name(struct mca_device *mca_dev)
-{
-	return mca_dev ? mca_dev->name : NULL;
-}
-
-extern enum MCA_AdapterStatus mca_device_status(struct mca_device *mca_dev);
-
-extern struct bus_type mca_bus_type;
-
-extern int mca_register_driver(struct mca_driver *drv);
-extern int mca_register_driver_integrated(struct mca_driver *, int);
-extern void mca_unregister_driver(struct mca_driver *drv);
-
-/* WARNING: only called by the boot time device setup */
-extern int mca_register_device(int bus, struct mca_device *mca_dev);
-
-#ifdef CONFIG_MCA_PROC_FS
-extern void mca_do_proc_init(void);
-extern void mca_set_adapter_procfn(int slot, MCA_ProcFn, void* dev);
-#else
-static inline void mca_do_proc_init(void)
-{
-}
-
-static inline void mca_set_adapter_procfn(int slot, MCA_ProcFn fn, void* dev)
-{
-}
-#endif
-
-#endif /* _LINUX_MCA_H */
diff --git a/ANDROID_3.4.5/include/linux/mdio-bitbang.h b/ANDROID_3.4.5/include/linux/mdio-bitbang.h
deleted file mode 100644
index 76f52bbb..00000000
--- a/ANDROID_3.4.5/include/linux/mdio-bitbang.h
+++ /dev/null
@@ -1,45 +0,0 @@
-#ifndef __LINUX_MDIO_BITBANG_H
-#define __LINUX_MDIO_BITBANG_H
-
-#include <linux/phy.h>
-
-struct module;
-
-struct mdiobb_ctrl;
-
-struct mdiobb_ops {
-	struct module *owner;
-
-	/* Set the Management Data Clock high if level is one,
-	 * low if level is zero.
-	 */
-	void (*set_mdc)(struct mdiobb_ctrl *ctrl, int level);
-
-	/* Configure the Management Data I/O pin as an input if
-	 * "output" is zero, or an output if "output" is one.
-	 */
-	void (*set_mdio_dir)(struct mdiobb_ctrl *ctrl, int output);
-
-	/* Set the Management Data I/O pin high if value is one,
-	 * low if "value" is zero.  This may only be called
-	 * when the MDIO pin is configured as an output.
-	 */
-	void (*set_mdio_data)(struct mdiobb_ctrl *ctrl, int value);
-
-	/* Retrieve the state Management Data I/O pin. */
-	int (*get_mdio_data)(struct mdiobb_ctrl *ctrl);
-};
-
-struct mdiobb_ctrl {
-	const struct mdiobb_ops *ops;
-	/* reset callback */
-	int (*reset)(struct mii_bus *bus);
-};
-
-/* The returned bus is not yet registered with the phy layer. */
-struct mii_bus *alloc_mdio_bitbang(struct mdiobb_ctrl *ctrl);
-
-/* The bus must already have been unregistered. */
-void free_mdio_bitbang(struct mii_bus *bus);
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/mdio-gpio.h b/ANDROID_3.4.5/include/linux/mdio-gpio.h
deleted file mode 100644
index 7c9fe3c2..00000000
--- a/ANDROID_3.4.5/include/linux/mdio-gpio.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * MDIO-GPIO bus platform data structures
- *
- * Copyright (C) 2008, Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#ifndef __LINUX_MDIO_GPIO_H
-#define __LINUX_MDIO_GPIO_H
-
-#include <linux/mdio-bitbang.h>
-
-struct mdio_gpio_platform_data {
-	/* GPIO numbers for bus pins */
-	unsigned int mdc;
-	unsigned int mdio;
-
-	unsigned int phy_mask;
-	int irqs[PHY_MAX_ADDR];
-	/* reset callback */
-	int (*reset)(struct mii_bus *bus);
-};
-
-#endif /* __LINUX_MDIO_GPIO_H */
diff --git a/ANDROID_3.4.5/include/linux/mdio.h b/ANDROID_3.4.5/include/linux/mdio.h
deleted file mode 100644
index dfb94795..00000000
--- a/ANDROID_3.4.5/include/linux/mdio.h
+++ /dev/null
@@ -1,361 +0,0 @@
-/*
- * linux/mdio.h: definitions for MDIO (clause 45) transceivers
- * Copyright 2006-2009 Solarflare Communications Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation, incorporated herein by reference.
- */
-
-#ifndef __LINUX_MDIO_H__
-#define __LINUX_MDIO_H__
-
-#include <linux/types.h>
-#include <linux/mii.h>
-
-/* MDIO Manageable Devices (MMDs). */
-#define MDIO_MMD_PMAPMD		1	/* Physical Medium Attachment/
-					 * Physical Medium Dependent */
-#define MDIO_MMD_WIS		2	/* WAN Interface Sublayer */
-#define MDIO_MMD_PCS		3	/* Physical Coding Sublayer */
-#define MDIO_MMD_PHYXS		4	/* PHY Extender Sublayer */
-#define MDIO_MMD_DTEXS		5	/* DTE Extender Sublayer */
-#define MDIO_MMD_TC		6	/* Transmission Convergence */
-#define MDIO_MMD_AN		7	/* Auto-Negotiation */
-#define MDIO_MMD_C22EXT		29	/* Clause 22 extension */
-#define MDIO_MMD_VEND1		30	/* Vendor specific 1 */
-#define MDIO_MMD_VEND2		31	/* Vendor specific 2 */
-
-/* Generic MDIO registers. */
-#define MDIO_CTRL1		MII_BMCR
-#define MDIO_STAT1		MII_BMSR
-#define MDIO_DEVID1		MII_PHYSID1
-#define MDIO_DEVID2		MII_PHYSID2
-#define MDIO_SPEED		4	/* Speed ability */
-#define MDIO_DEVS1		5	/* Devices in package */
-#define MDIO_DEVS2		6
-#define MDIO_CTRL2		7	/* 10G control 2 */
-#define MDIO_STAT2		8	/* 10G status 2 */
-#define MDIO_PMA_TXDIS		9	/* 10G PMA/PMD transmit disable */
-#define MDIO_PMA_RXDET		10	/* 10G PMA/PMD receive signal detect */
-#define MDIO_PMA_EXTABLE	11	/* 10G PMA/PMD extended ability */
-#define MDIO_PKGID1		14	/* Package identifier */
-#define MDIO_PKGID2		15
-#define MDIO_AN_ADVERTISE	16	/* AN advertising (base page) */
-#define MDIO_AN_LPA		19	/* AN LP abilities (base page) */
-#define MDIO_PHYXS_LNSTAT	24	/* PHY XGXS lane state */
-
-/* Media-dependent registers. */
-#define MDIO_PMA_10GBT_SWAPPOL	130	/* 10GBASE-T pair swap & polarity */
-#define MDIO_PMA_10GBT_TXPWR	131	/* 10GBASE-T TX power control */
-#define MDIO_PMA_10GBT_SNR	133	/* 10GBASE-T SNR margin, lane A.
-					 * Lanes B-D are numbered 134-136. */
-#define MDIO_PMA_10GBR_FECABLE	170	/* 10GBASE-R FEC ability */
-#define MDIO_PCS_10GBX_STAT1	24	/* 10GBASE-X PCS status 1 */
-#define MDIO_PCS_10GBRT_STAT1	32	/* 10GBASE-R/-T PCS status 1 */
-#define MDIO_PCS_10GBRT_STAT2	33	/* 10GBASE-R/-T PCS status 2 */
-#define MDIO_AN_10GBT_CTRL	32	/* 10GBASE-T auto-negotiation control */
-#define MDIO_AN_10GBT_STAT	33	/* 10GBASE-T auto-negotiation status */
-#define MDIO_AN_EEE_ADV		60	/* EEE advertisement */
-
-/* LASI (Link Alarm Status Interrupt) registers, defined by XENPAK MSA. */
-#define MDIO_PMA_LASI_RXCTRL	0x9000	/* RX_ALARM control */
-#define MDIO_PMA_LASI_TXCTRL	0x9001	/* TX_ALARM control */
-#define MDIO_PMA_LASI_CTRL	0x9002	/* LASI control */
-#define MDIO_PMA_LASI_RXSTAT	0x9003	/* RX_ALARM status */
-#define MDIO_PMA_LASI_TXSTAT	0x9004	/* TX_ALARM status */
-#define MDIO_PMA_LASI_STAT	0x9005	/* LASI status */
-
-/* Control register 1. */
-/* Enable extended speed selection */
-#define MDIO_CTRL1_SPEEDSELEXT		(BMCR_SPEED1000 | BMCR_SPEED100)
-/* All speed selection bits */
-#define MDIO_CTRL1_SPEEDSEL		(MDIO_CTRL1_SPEEDSELEXT | 0x003c)
-#define MDIO_CTRL1_FULLDPLX		BMCR_FULLDPLX
-#define MDIO_CTRL1_LPOWER		BMCR_PDOWN
-#define MDIO_CTRL1_RESET		BMCR_RESET
-#define MDIO_PMA_CTRL1_LOOPBACK		0x0001
-#define MDIO_PMA_CTRL1_SPEED1000	BMCR_SPEED1000
-#define MDIO_PMA_CTRL1_SPEED100		BMCR_SPEED100
-#define MDIO_PCS_CTRL1_LOOPBACK		BMCR_LOOPBACK
-#define MDIO_PHYXS_CTRL1_LOOPBACK	BMCR_LOOPBACK
-#define MDIO_AN_CTRL1_RESTART		BMCR_ANRESTART
-#define MDIO_AN_CTRL1_ENABLE		BMCR_ANENABLE
-#define MDIO_AN_CTRL1_XNP		0x2000	/* Enable extended next page */
-
-/* 10 Gb/s */
-#define MDIO_CTRL1_SPEED10G		(MDIO_CTRL1_SPEEDSELEXT | 0x00)
-/* 10PASS-TS/2BASE-TL */
-#define MDIO_CTRL1_SPEED10P2B		(MDIO_CTRL1_SPEEDSELEXT | 0x04)
-
-/* Status register 1. */
-#define MDIO_STAT1_LPOWERABLE		0x0002	/* Low-power ability */
-#define MDIO_STAT1_LSTATUS		BMSR_LSTATUS
-#define MDIO_STAT1_FAULT		0x0080	/* Fault */
-#define MDIO_AN_STAT1_LPABLE		0x0001	/* Link partner AN ability */
-#define MDIO_AN_STAT1_ABLE		BMSR_ANEGCAPABLE
-#define MDIO_AN_STAT1_RFAULT		BMSR_RFAULT
-#define MDIO_AN_STAT1_COMPLETE		BMSR_ANEGCOMPLETE
-#define MDIO_AN_STAT1_PAGE		0x0040	/* Page received */
-#define MDIO_AN_STAT1_XNP		0x0080	/* Extended next page status */
-
-/* Speed register. */
-#define MDIO_SPEED_10G			0x0001	/* 10G capable */
-#define MDIO_PMA_SPEED_2B		0x0002	/* 2BASE-TL capable */
-#define MDIO_PMA_SPEED_10P		0x0004	/* 10PASS-TS capable */
-#define MDIO_PMA_SPEED_1000		0x0010	/* 1000M capable */
-#define MDIO_PMA_SPEED_100		0x0020	/* 100M capable */
-#define MDIO_PMA_SPEED_10		0x0040	/* 10M capable */
-#define MDIO_PCS_SPEED_10P2B		0x0002	/* 10PASS-TS/2BASE-TL capable */
-
-/* Device present registers. */
-#define MDIO_DEVS_PRESENT(devad)	(1 << (devad))
-#define MDIO_DEVS_PMAPMD		MDIO_DEVS_PRESENT(MDIO_MMD_PMAPMD)
-#define MDIO_DEVS_WIS			MDIO_DEVS_PRESENT(MDIO_MMD_WIS)
-#define MDIO_DEVS_PCS			MDIO_DEVS_PRESENT(MDIO_MMD_PCS)
-#define MDIO_DEVS_PHYXS			MDIO_DEVS_PRESENT(MDIO_MMD_PHYXS)
-#define MDIO_DEVS_DTEXS			MDIO_DEVS_PRESENT(MDIO_MMD_DTEXS)
-#define MDIO_DEVS_TC			MDIO_DEVS_PRESENT(MDIO_MMD_TC)
-#define MDIO_DEVS_AN			MDIO_DEVS_PRESENT(MDIO_MMD_AN)
-#define MDIO_DEVS_C22EXT		MDIO_DEVS_PRESENT(MDIO_MMD_C22EXT)
-
-/* Control register 2. */
-#define MDIO_PMA_CTRL2_TYPE		0x000f	/* PMA/PMD type selection */
-#define MDIO_PMA_CTRL2_10GBCX4		0x0000	/* 10GBASE-CX4 type */
-#define MDIO_PMA_CTRL2_10GBEW		0x0001	/* 10GBASE-EW type */
-#define MDIO_PMA_CTRL2_10GBLW		0x0002	/* 10GBASE-LW type */
-#define MDIO_PMA_CTRL2_10GBSW		0x0003	/* 10GBASE-SW type */
-#define MDIO_PMA_CTRL2_10GBLX4		0x0004	/* 10GBASE-LX4 type */
-#define MDIO_PMA_CTRL2_10GBER		0x0005	/* 10GBASE-ER type */
-#define MDIO_PMA_CTRL2_10GBLR		0x0006	/* 10GBASE-LR type */
-#define MDIO_PMA_CTRL2_10GBSR		0x0007	/* 10GBASE-SR type */
-#define MDIO_PMA_CTRL2_10GBLRM		0x0008	/* 10GBASE-LRM type */
-#define MDIO_PMA_CTRL2_10GBT		0x0009	/* 10GBASE-T type */
-#define MDIO_PMA_CTRL2_10GBKX4		0x000a	/* 10GBASE-KX4 type */
-#define MDIO_PMA_CTRL2_10GBKR		0x000b	/* 10GBASE-KR type */
-#define MDIO_PMA_CTRL2_1000BT		0x000c	/* 1000BASE-T type */
-#define MDIO_PMA_CTRL2_1000BKX		0x000d	/* 1000BASE-KX type */
-#define MDIO_PMA_CTRL2_100BTX		0x000e	/* 100BASE-TX type */
-#define MDIO_PMA_CTRL2_10BT		0x000f	/* 10BASE-T type */
-#define MDIO_PCS_CTRL2_TYPE		0x0003	/* PCS type selection */
-#define MDIO_PCS_CTRL2_10GBR		0x0000	/* 10GBASE-R type */
-#define MDIO_PCS_CTRL2_10GBX		0x0001	/* 10GBASE-X type */
-#define MDIO_PCS_CTRL2_10GBW		0x0002	/* 10GBASE-W type */
-#define MDIO_PCS_CTRL2_10GBT		0x0003	/* 10GBASE-T type */
-
-/* Status register 2. */
-#define MDIO_STAT2_RXFAULT		0x0400	/* Receive fault */
-#define MDIO_STAT2_TXFAULT		0x0800	/* Transmit fault */
-#define MDIO_STAT2_DEVPRST		0xc000	/* Device present */
-#define MDIO_STAT2_DEVPRST_VAL		0x8000	/* Device present value */
-#define MDIO_PMA_STAT2_LBABLE		0x0001	/* PMA loopback ability */
-#define MDIO_PMA_STAT2_10GBEW		0x0002	/* 10GBASE-EW ability */
-#define MDIO_PMA_STAT2_10GBLW		0x0004	/* 10GBASE-LW ability */
-#define MDIO_PMA_STAT2_10GBSW		0x0008	/* 10GBASE-SW ability */
-#define MDIO_PMA_STAT2_10GBLX4		0x0010	/* 10GBASE-LX4 ability */
-#define MDIO_PMA_STAT2_10GBER		0x0020	/* 10GBASE-ER ability */
-#define MDIO_PMA_STAT2_10GBLR		0x0040	/* 10GBASE-LR ability */
-#define MDIO_PMA_STAT2_10GBSR		0x0080	/* 10GBASE-SR ability */
-#define MDIO_PMD_STAT2_TXDISAB		0x0100	/* PMD TX disable ability */
-#define MDIO_PMA_STAT2_EXTABLE		0x0200	/* Extended abilities */
-#define MDIO_PMA_STAT2_RXFLTABLE	0x1000	/* Receive fault ability */
-#define MDIO_PMA_STAT2_TXFLTABLE	0x2000	/* Transmit fault ability */
-#define MDIO_PCS_STAT2_10GBR		0x0001	/* 10GBASE-R capable */
-#define MDIO_PCS_STAT2_10GBX		0x0002	/* 10GBASE-X capable */
-#define MDIO_PCS_STAT2_10GBW		0x0004	/* 10GBASE-W capable */
-#define MDIO_PCS_STAT2_RXFLTABLE	0x1000	/* Receive fault ability */
-#define MDIO_PCS_STAT2_TXFLTABLE	0x2000	/* Transmit fault ability */
-
-/* Transmit disable register. */
-#define MDIO_PMD_TXDIS_GLOBAL		0x0001	/* Global PMD TX disable */
-#define MDIO_PMD_TXDIS_0		0x0002	/* PMD TX disable 0 */
-#define MDIO_PMD_TXDIS_1		0x0004	/* PMD TX disable 1 */
-#define MDIO_PMD_TXDIS_2		0x0008	/* PMD TX disable 2 */
-#define MDIO_PMD_TXDIS_3		0x0010	/* PMD TX disable 3 */
-
-/* Receive signal detect register. */
-#define MDIO_PMD_RXDET_GLOBAL		0x0001	/* Global PMD RX signal detect */
-#define MDIO_PMD_RXDET_0		0x0002	/* PMD RX signal detect 0 */
-#define MDIO_PMD_RXDET_1		0x0004	/* PMD RX signal detect 1 */
-#define MDIO_PMD_RXDET_2		0x0008	/* PMD RX signal detect 2 */
-#define MDIO_PMD_RXDET_3		0x0010	/* PMD RX signal detect 3 */
-
-/* Extended abilities register. */
-#define MDIO_PMA_EXTABLE_10GCX4		0x0001	/* 10GBASE-CX4 ability */
-#define MDIO_PMA_EXTABLE_10GBLRM	0x0002	/* 10GBASE-LRM ability */
-#define MDIO_PMA_EXTABLE_10GBT		0x0004	/* 10GBASE-T ability */
-#define MDIO_PMA_EXTABLE_10GBKX4	0x0008	/* 10GBASE-KX4 ability */
-#define MDIO_PMA_EXTABLE_10GBKR		0x0010	/* 10GBASE-KR ability */
-#define MDIO_PMA_EXTABLE_1000BT		0x0020	/* 1000BASE-T ability */
-#define MDIO_PMA_EXTABLE_1000BKX	0x0040	/* 1000BASE-KX ability */
-#define MDIO_PMA_EXTABLE_100BTX		0x0080	/* 100BASE-TX ability */
-#define MDIO_PMA_EXTABLE_10BT		0x0100	/* 10BASE-T ability */
-
-/* PHY XGXS lane state register. */
-#define MDIO_PHYXS_LNSTAT_SYNC0		0x0001
-#define MDIO_PHYXS_LNSTAT_SYNC1		0x0002
-#define MDIO_PHYXS_LNSTAT_SYNC2		0x0004
-#define MDIO_PHYXS_LNSTAT_SYNC3		0x0008
-#define MDIO_PHYXS_LNSTAT_ALIGN		0x1000
-
-/* PMA 10GBASE-T pair swap & polarity */
-#define MDIO_PMA_10GBT_SWAPPOL_ABNX	0x0001	/* Pair A/B uncrossed */
-#define MDIO_PMA_10GBT_SWAPPOL_CDNX	0x0002	/* Pair C/D uncrossed */
-#define MDIO_PMA_10GBT_SWAPPOL_AREV	0x0100	/* Pair A polarity reversed */
-#define MDIO_PMA_10GBT_SWAPPOL_BREV	0x0200	/* Pair B polarity reversed */
-#define MDIO_PMA_10GBT_SWAPPOL_CREV	0x0400	/* Pair C polarity reversed */
-#define MDIO_PMA_10GBT_SWAPPOL_DREV	0x0800	/* Pair D polarity reversed */
-
-/* PMA 10GBASE-T TX power register. */
-#define MDIO_PMA_10GBT_TXPWR_SHORT	0x0001	/* Short-reach mode */
-
-/* PMA 10GBASE-T SNR registers. */
-/* Value is SNR margin in dB, clamped to range [-127, 127], plus 0x8000. */
-#define MDIO_PMA_10GBT_SNR_BIAS		0x8000
-#define MDIO_PMA_10GBT_SNR_MAX		127
-
-/* PMA 10GBASE-R FEC ability register. */
-#define MDIO_PMA_10GBR_FECABLE_ABLE	0x0001	/* FEC ability */
-#define MDIO_PMA_10GBR_FECABLE_ERRABLE	0x0002	/* FEC error indic. ability */
-
-/* PCS 10GBASE-R/-T status register 1. */
-#define MDIO_PCS_10GBRT_STAT1_BLKLK	0x0001	/* Block lock attained */
-
-/* PCS 10GBASE-R/-T status register 2. */
-#define MDIO_PCS_10GBRT_STAT2_ERR	0x00ff
-#define MDIO_PCS_10GBRT_STAT2_BER	0x3f00
-
-/* AN 10GBASE-T control register. */
-#define MDIO_AN_10GBT_CTRL_ADV10G	0x1000	/* Advertise 10GBASE-T */
-
-/* AN 10GBASE-T status register. */
-#define MDIO_AN_10GBT_STAT_LPTRR	0x0200	/* LP training reset req. */
-#define MDIO_AN_10GBT_STAT_LPLTABLE	0x0400	/* LP loop timing ability */
-#define MDIO_AN_10GBT_STAT_LP10G	0x0800	/* LP is 10GBT capable */
-#define MDIO_AN_10GBT_STAT_REMOK	0x1000	/* Remote OK */
-#define MDIO_AN_10GBT_STAT_LOCOK	0x2000	/* Local OK */
-#define MDIO_AN_10GBT_STAT_MS		0x4000	/* Master/slave config */
-#define MDIO_AN_10GBT_STAT_MSFLT	0x8000	/* Master/slave config fault */
-
-/* AN EEE Advertisement register. */
-#define MDIO_AN_EEE_ADV_100TX		0x0002	/* Advertise 100TX EEE cap */
-#define MDIO_AN_EEE_ADV_1000T		0x0004	/* Advertise 1000T EEE cap */
-
-/* LASI RX_ALARM control/status registers. */
-#define MDIO_PMA_LASI_RX_PHYXSLFLT	0x0001	/* PHY XS RX local fault */
-#define MDIO_PMA_LASI_RX_PCSLFLT	0x0008	/* PCS RX local fault */
-#define MDIO_PMA_LASI_RX_PMALFLT	0x0010	/* PMA/PMD RX local fault */
-#define MDIO_PMA_LASI_RX_OPTICPOWERFLT	0x0020	/* RX optical power fault */
-#define MDIO_PMA_LASI_RX_WISLFLT	0x0200	/* WIS local fault */
-
-/* LASI TX_ALARM control/status registers. */
-#define MDIO_PMA_LASI_TX_PHYXSLFLT	0x0001	/* PHY XS TX local fault */
-#define MDIO_PMA_LASI_TX_PCSLFLT	0x0008	/* PCS TX local fault */
-#define MDIO_PMA_LASI_TX_PMALFLT	0x0010	/* PMA/PMD TX local fault */
-#define MDIO_PMA_LASI_TX_LASERPOWERFLT	0x0080	/* Laser output power fault */
-#define MDIO_PMA_LASI_TX_LASERTEMPFLT	0x0100	/* Laser temperature fault */
-#define MDIO_PMA_LASI_TX_LASERBICURRFLT	0x0200	/* Laser bias current fault */
-
-/* LASI control/status registers. */
-#define MDIO_PMA_LASI_LSALARM		0x0001	/* LS_ALARM enable/status */
-#define MDIO_PMA_LASI_TXALARM		0x0002	/* TX_ALARM enable/status */
-#define MDIO_PMA_LASI_RXALARM		0x0004	/* RX_ALARM enable/status */
-
-/* Mapping between MDIO PRTAD/DEVAD and mii_ioctl_data::phy_id */
-
-#define MDIO_PHY_ID_C45			0x8000
-#define MDIO_PHY_ID_PRTAD		0x03e0
-#define MDIO_PHY_ID_DEVAD		0x001f
-#define MDIO_PHY_ID_C45_MASK						\
-	(MDIO_PHY_ID_C45 | MDIO_PHY_ID_PRTAD | MDIO_PHY_ID_DEVAD)
-
-static inline __u16 mdio_phy_id_c45(int prtad, int devad)
-{
-	return MDIO_PHY_ID_C45 | (prtad << 5) | devad;
-}
-
-#ifdef __KERNEL__
-
-static inline bool mdio_phy_id_is_c45(int phy_id)
-{
-	return (phy_id & MDIO_PHY_ID_C45) && !(phy_id & ~MDIO_PHY_ID_C45_MASK);
-}
-
-static inline __u16 mdio_phy_id_prtad(int phy_id)
-{
-	return (phy_id & MDIO_PHY_ID_PRTAD) >> 5;
-}
-
-static inline __u16 mdio_phy_id_devad(int phy_id)
-{
-	return phy_id & MDIO_PHY_ID_DEVAD;
-}
-
-/**
- * struct mdio_if_info - Ethernet controller MDIO interface
- * @prtad: PRTAD of the PHY (%MDIO_PRTAD_NONE if not present/unknown)
- * @mmds: Mask of MMDs expected to be present in the PHY.  This must be
- *	non-zero unless @prtad = %MDIO_PRTAD_NONE.
- * @mode_support: MDIO modes supported.  If %MDIO_SUPPORTS_C22 is set then
- *	MII register access will be passed through with @devad =
- *	%MDIO_DEVAD_NONE.  If %MDIO_EMULATE_C22 is set then access to
- *	commonly used clause 22 registers will be translated into
- *	clause 45 registers.
- * @dev: Net device structure
- * @mdio_read: Register read function; returns value or negative error code
- * @mdio_write: Register write function; returns 0 or negative error code
- */
-struct mdio_if_info {
-	int prtad;
-	u32 mmds;
-	unsigned mode_support;
-
-	struct net_device *dev;
-	int (*mdio_read)(struct net_device *dev, int prtad, int devad,
-			 u16 addr);
-	int (*mdio_write)(struct net_device *dev, int prtad, int devad,
-			  u16 addr, u16 val);
-};
-
-#define MDIO_PRTAD_NONE			(-1)
-#define MDIO_DEVAD_NONE			(-1)
-#define MDIO_SUPPORTS_C22		1
-#define MDIO_SUPPORTS_C45		2
-#define MDIO_EMULATE_C22		4
-
-struct ethtool_cmd;
-struct ethtool_pauseparam;
-extern int mdio45_probe(struct mdio_if_info *mdio, int prtad);
-extern int mdio_set_flag(const struct mdio_if_info *mdio,
-			 int prtad, int devad, u16 addr, int mask,
-			 bool sense);
-extern int mdio45_links_ok(const struct mdio_if_info *mdio, u32 mmds);
-extern int mdio45_nway_restart(const struct mdio_if_info *mdio);
-extern void mdio45_ethtool_gset_npage(const struct mdio_if_info *mdio,
-				      struct ethtool_cmd *ecmd,
-				      u32 npage_adv, u32 npage_lpa);
-extern void
-mdio45_ethtool_spauseparam_an(const struct mdio_if_info *mdio,
-			      const struct ethtool_pauseparam *ecmd);
-
-/**
- * mdio45_ethtool_gset - get settings for ETHTOOL_GSET
- * @mdio: MDIO interface
- * @ecmd: Ethtool request structure
- *
- * Since the CSRs for auto-negotiation using next pages are not fully
- * standardised, this function does not attempt to decode them.  Use
- * mdio45_ethtool_gset_npage() to specify advertisement bits from next
- * pages.
- */
-static inline void mdio45_ethtool_gset(const struct mdio_if_info *mdio,
-				       struct ethtool_cmd *ecmd)
-{
-	mdio45_ethtool_gset_npage(mdio, ecmd, 0, 0);
-}
-
-extern int mdio_mii_ioctl(const struct mdio_if_info *mdio,
-			  struct mii_ioctl_data *mii_data, int cmd);
-
-#endif /* __KERNEL__ */
-#endif /* __LINUX_MDIO_H__ */
diff --git a/ANDROID_3.4.5/include/linux/media.h b/ANDROID_3.4.5/include/linux/media.h
deleted file mode 100644
index 0ef88332..00000000
--- a/ANDROID_3.4.5/include/linux/media.h
+++ /dev/null
@@ -1,132 +0,0 @@
-/*
- * Multimedia device API
- *
- * Copyright (C) 2010 Nokia Corporation
- *
- * Contacts: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
- *	     Sakari Ailus <sakari.ailus@iki.fi>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __LINUX_MEDIA_H
-#define __LINUX_MEDIA_H
-
-#include <linux/ioctl.h>
-#include <linux/types.h>
-#include <linux/version.h>
-
-#define MEDIA_API_VERSION	KERNEL_VERSION(0, 1, 0)
-
-struct media_device_info {
-	char driver[16];
-	char model[32];
-	char serial[40];
-	char bus_info[32];
-	__u32 media_version;
-	__u32 hw_revision;
-	__u32 driver_version;
-	__u32 reserved[31];
-};
-
-#define MEDIA_ENT_ID_FLAG_NEXT		(1 << 31)
-
-#define MEDIA_ENT_TYPE_SHIFT		16
-#define MEDIA_ENT_TYPE_MASK		0x00ff0000
-#define MEDIA_ENT_SUBTYPE_MASK		0x0000ffff
-
-#define MEDIA_ENT_T_DEVNODE		(1 << MEDIA_ENT_TYPE_SHIFT)
-#define MEDIA_ENT_T_DEVNODE_V4L		(MEDIA_ENT_T_DEVNODE + 1)
-#define MEDIA_ENT_T_DEVNODE_FB		(MEDIA_ENT_T_DEVNODE + 2)
-#define MEDIA_ENT_T_DEVNODE_ALSA	(MEDIA_ENT_T_DEVNODE + 3)
-#define MEDIA_ENT_T_DEVNODE_DVB		(MEDIA_ENT_T_DEVNODE + 4)
-
-#define MEDIA_ENT_T_V4L2_SUBDEV		(2 << MEDIA_ENT_TYPE_SHIFT)
-#define MEDIA_ENT_T_V4L2_SUBDEV_SENSOR	(MEDIA_ENT_T_V4L2_SUBDEV + 1)
-#define MEDIA_ENT_T_V4L2_SUBDEV_FLASH	(MEDIA_ENT_T_V4L2_SUBDEV + 2)
-#define MEDIA_ENT_T_V4L2_SUBDEV_LENS	(MEDIA_ENT_T_V4L2_SUBDEV + 3)
-
-#define MEDIA_ENT_FL_DEFAULT		(1 << 0)
-
-struct media_entity_desc {
-	__u32 id;
-	char name[32];
-	__u32 type;
-	__u32 revision;
-	__u32 flags;
-	__u32 group_id;
-	__u16 pads;
-	__u16 links;
-
-	__u32 reserved[4];
-
-	union {
-		/* Node specifications */
-		struct {
-			__u32 major;
-			__u32 minor;
-		} v4l;
-		struct {
-			__u32 major;
-			__u32 minor;
-		} fb;
-		struct {
-			__u32 card;
-			__u32 device;
-			__u32 subdevice;
-		} alsa;
-		int dvb;
-
-		/* Sub-device specifications */
-		/* Nothing needed yet */
-		__u8 raw[184];
-	};
-};
-
-#define MEDIA_PAD_FL_SINK		(1 << 0)
-#define MEDIA_PAD_FL_SOURCE		(1 << 1)
-
-struct media_pad_desc {
-	__u32 entity;		/* entity ID */
-	__u16 index;		/* pad index */
-	__u32 flags;		/* pad flags */
-	__u32 reserved[2];
-};
-
-#define MEDIA_LNK_FL_ENABLED		(1 << 0)
-#define MEDIA_LNK_FL_IMMUTABLE		(1 << 1)
-#define MEDIA_LNK_FL_DYNAMIC		(1 << 2)
-
-struct media_link_desc {
-	struct media_pad_desc source;
-	struct media_pad_desc sink;
-	__u32 flags;
-	__u32 reserved[2];
-};
-
-struct media_links_enum {
-	__u32 entity;
-	/* Should have enough room for pads elements */
-	struct media_pad_desc __user *pads;
-	/* Should have enough room for links elements */
-	struct media_link_desc __user *links;
-	__u32 reserved[4];
-};
-
-#define MEDIA_IOC_DEVICE_INFO		_IOWR('|', 0x00, struct media_device_info)
-#define MEDIA_IOC_ENUM_ENTITIES		_IOWR('|', 0x01, struct media_entity_desc)
-#define MEDIA_IOC_ENUM_LINKS		_IOWR('|', 0x02, struct media_links_enum)
-#define MEDIA_IOC_SETUP_LINK		_IOWR('|', 0x03, struct media_link_desc)
-
-#endif /* __LINUX_MEDIA_H */
diff --git a/ANDROID_3.4.5/include/linux/memblock.h b/ANDROID_3.4.5/include/linux/memblock.h
deleted file mode 100644
index 19dc455b..00000000
--- a/ANDROID_3.4.5/include/linux/memblock.h
+++ /dev/null
@@ -1,251 +0,0 @@
-#ifndef _LINUX_MEMBLOCK_H
-#define _LINUX_MEMBLOCK_H
-#ifdef __KERNEL__
-
-#ifdef CONFIG_HAVE_MEMBLOCK
-/*
- * Logical memory blocks.
- *
- * Copyright (C) 2001 Peter Bergner, IBM Corp.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <linux/init.h>
-#include <linux/mm.h>
-
-#define INIT_MEMBLOCK_REGIONS	128
-
-struct memblock_region {
-	phys_addr_t base;
-	phys_addr_t size;
-#ifdef CONFIG_HAVE_MEMBLOCK_NODE_MAP
-	int nid;
-#endif
-};
-
-struct memblock_type {
-	unsigned long cnt;	/* number of regions */
-	unsigned long max;	/* size of the allocated array */
-	phys_addr_t total_size;	/* size of all regions */
-	struct memblock_region *regions;
-};
-
-struct memblock {
-	phys_addr_t current_limit;
-	struct memblock_type memory;
-	struct memblock_type reserved;
-};
-
-extern struct memblock memblock;
-extern int memblock_debug;
-
-#define memblock_dbg(fmt, ...) \
-	if (memblock_debug) printk(KERN_INFO pr_fmt(fmt), ##__VA_ARGS__)
-
-phys_addr_t memblock_find_in_range_node(phys_addr_t start, phys_addr_t end,
-				phys_addr_t size, phys_addr_t align, int nid);
-phys_addr_t memblock_find_in_range(phys_addr_t start, phys_addr_t end,
-				   phys_addr_t size, phys_addr_t align);
-phys_addr_t get_allocated_memblock_reserved_regions_info(phys_addr_t *addr);
-void memblock_allow_resize(void);
-int memblock_add_node(phys_addr_t base, phys_addr_t size, int nid);
-int memblock_add(phys_addr_t base, phys_addr_t size);
-int memblock_remove(phys_addr_t base, phys_addr_t size);
-int memblock_free(phys_addr_t base, phys_addr_t size);
-int memblock_reserve(phys_addr_t base, phys_addr_t size);
-
-#ifdef CONFIG_HAVE_MEMBLOCK_NODE_MAP
-void __next_mem_pfn_range(int *idx, int nid, unsigned long *out_start_pfn,
-			  unsigned long *out_end_pfn, int *out_nid);
-
-/**
- * for_each_mem_pfn_range - early memory pfn range iterator
- * @i: an integer used as loop variable
- * @nid: node selector, %MAX_NUMNODES for all nodes
- * @p_start: ptr to ulong for start pfn of the range, can be %NULL
- * @p_end: ptr to ulong for end pfn of the range, can be %NULL
- * @p_nid: ptr to int for nid of the range, can be %NULL
- *
- * Walks over configured memory ranges.  Available after early_node_map is
- * populated.
- */
-#define for_each_mem_pfn_range(i, nid, p_start, p_end, p_nid)		\
-	for (i = -1, __next_mem_pfn_range(&i, nid, p_start, p_end, p_nid); \
-	     i >= 0; __next_mem_pfn_range(&i, nid, p_start, p_end, p_nid))
-#endif /* CONFIG_HAVE_MEMBLOCK_NODE_MAP */
-
-void __next_free_mem_range(u64 *idx, int nid, phys_addr_t *out_start,
-			   phys_addr_t *out_end, int *out_nid);
-
-/**
- * for_each_free_mem_range - iterate through free memblock areas
- * @i: u64 used as loop variable
- * @nid: node selector, %MAX_NUMNODES for all nodes
- * @p_start: ptr to phys_addr_t for start address of the range, can be %NULL
- * @p_end: ptr to phys_addr_t for end address of the range, can be %NULL
- * @p_nid: ptr to int for nid of the range, can be %NULL
- *
- * Walks over free (memory && !reserved) areas of memblock.  Available as
- * soon as memblock is initialized.
- */
-#define for_each_free_mem_range(i, nid, p_start, p_end, p_nid)		\
-	for (i = 0,							\
-	     __next_free_mem_range(&i, nid, p_start, p_end, p_nid);	\
-	     i != (u64)ULLONG_MAX;					\
-	     __next_free_mem_range(&i, nid, p_start, p_end, p_nid))
-
-void __next_free_mem_range_rev(u64 *idx, int nid, phys_addr_t *out_start,
-			       phys_addr_t *out_end, int *out_nid);
-
-/**
- * for_each_free_mem_range_reverse - rev-iterate through free memblock areas
- * @i: u64 used as loop variable
- * @nid: node selector, %MAX_NUMNODES for all nodes
- * @p_start: ptr to phys_addr_t for start address of the range, can be %NULL
- * @p_end: ptr to phys_addr_t for end address of the range, can be %NULL
- * @p_nid: ptr to int for nid of the range, can be %NULL
- *
- * Walks over free (memory && !reserved) areas of memblock in reverse
- * order.  Available as soon as memblock is initialized.
- */
-#define for_each_free_mem_range_reverse(i, nid, p_start, p_end, p_nid)	\
-	for (i = (u64)ULLONG_MAX,					\
-	     __next_free_mem_range_rev(&i, nid, p_start, p_end, p_nid);	\
-	     i != (u64)ULLONG_MAX;					\
-	     __next_free_mem_range_rev(&i, nid, p_start, p_end, p_nid))
-
-#ifdef CONFIG_HAVE_MEMBLOCK_NODE_MAP
-int memblock_set_node(phys_addr_t base, phys_addr_t size, int nid);
-
-static inline void memblock_set_region_node(struct memblock_region *r, int nid)
-{
-	r->nid = nid;
-}
-
-static inline int memblock_get_region_node(const struct memblock_region *r)
-{
-	return r->nid;
-}
-#else
-static inline void memblock_set_region_node(struct memblock_region *r, int nid)
-{
-}
-
-static inline int memblock_get_region_node(const struct memblock_region *r)
-{
-	return 0;
-}
-#endif /* CONFIG_HAVE_MEMBLOCK_NODE_MAP */
-
-phys_addr_t memblock_alloc_nid(phys_addr_t size, phys_addr_t align, int nid);
-phys_addr_t memblock_alloc_try_nid(phys_addr_t size, phys_addr_t align, int nid);
-
-phys_addr_t memblock_alloc(phys_addr_t size, phys_addr_t align);
-
-/* Flags for memblock_alloc_base() amd __memblock_alloc_base() */
-#define MEMBLOCK_ALLOC_ANYWHERE	(~(phys_addr_t)0)
-#define MEMBLOCK_ALLOC_ACCESSIBLE	0
-
-phys_addr_t memblock_alloc_base(phys_addr_t size, phys_addr_t align,
-				phys_addr_t max_addr);
-phys_addr_t __memblock_alloc_base(phys_addr_t size, phys_addr_t align,
-				  phys_addr_t max_addr);
-phys_addr_t memblock_phys_mem_size(void);
-phys_addr_t memblock_start_of_DRAM(void);
-phys_addr_t memblock_end_of_DRAM(void);
-void memblock_enforce_memory_limit(phys_addr_t memory_limit);
-int memblock_is_memory(phys_addr_t addr);
-int memblock_is_region_memory(phys_addr_t base, phys_addr_t size);
-int memblock_is_reserved(phys_addr_t addr);
-int memblock_is_region_reserved(phys_addr_t base, phys_addr_t size);
-
-extern void __memblock_dump_all(void);
-
-static inline void memblock_dump_all(void)
-{
-	if (memblock_debug)
-		__memblock_dump_all();
-}
-
-/**
- * memblock_set_current_limit - Set the current allocation limit to allow
- *                         limiting allocations to what is currently
- *                         accessible during boot
- * @limit: New limit value (physical address)
- */
-void memblock_set_current_limit(phys_addr_t limit);
-
-
-/*
- * pfn conversion functions
- *
- * While the memory MEMBLOCKs should always be page aligned, the reserved
- * MEMBLOCKs may not be. This accessor attempt to provide a very clear
- * idea of what they return for such non aligned MEMBLOCKs.
- */
-
-/**
- * memblock_region_memory_base_pfn - Return the lowest pfn intersecting with the memory region
- * @reg: memblock_region structure
- */
-static inline unsigned long memblock_region_memory_base_pfn(const struct memblock_region *reg)
-{
-	return PFN_UP(reg->base);
-}
-
-/**
- * memblock_region_memory_end_pfn - Return the end_pfn this region
- * @reg: memblock_region structure
- */
-static inline unsigned long memblock_region_memory_end_pfn(const struct memblock_region *reg)
-{
-	return PFN_DOWN(reg->base + reg->size);
-}
-
-/**
- * memblock_region_reserved_base_pfn - Return the lowest pfn intersecting with the reserved region
- * @reg: memblock_region structure
- */
-static inline unsigned long memblock_region_reserved_base_pfn(const struct memblock_region *reg)
-{
-	return PFN_DOWN(reg->base);
-}
-
-/**
- * memblock_region_reserved_end_pfn - Return the end_pfn this region
- * @reg: memblock_region structure
- */
-static inline unsigned long memblock_region_reserved_end_pfn(const struct memblock_region *reg)
-{
-	return PFN_UP(reg->base + reg->size);
-}
-
-#define for_each_memblock(memblock_type, region)					\
-	for (region = memblock.memblock_type.regions;				\
-	     region < (memblock.memblock_type.regions + memblock.memblock_type.cnt);	\
-	     region++)
-
-
-#ifdef CONFIG_ARCH_DISCARD_MEMBLOCK
-#define __init_memblock __meminit
-#define __initdata_memblock __meminitdata
-#else
-#define __init_memblock
-#define __initdata_memblock
-#endif
-
-#else
-static inline phys_addr_t memblock_alloc(phys_addr_t size, phys_addr_t align)
-{
-	return 0;
-}
-
-#endif /* CONFIG_HAVE_MEMBLOCK */
-
-#endif /* __KERNEL__ */
-
-#endif /* _LINUX_MEMBLOCK_H */
diff --git a/ANDROID_3.4.5/include/linux/memcontrol.h b/ANDROID_3.4.5/include/linux/memcontrol.h
deleted file mode 100644
index f94efd2f..00000000
--- a/ANDROID_3.4.5/include/linux/memcontrol.h
+++ /dev/null
@@ -1,452 +0,0 @@
-/* memcontrol.h - Memory Controller
- *
- * Copyright IBM Corporation, 2007
- * Author Balbir Singh <balbir@linux.vnet.ibm.com>
- *
- * Copyright 2007 OpenVZ SWsoft Inc
- * Author: Pavel Emelianov <xemul@openvz.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#ifndef _LINUX_MEMCONTROL_H
-#define _LINUX_MEMCONTROL_H
-#include <linux/cgroup.h>
-#include <linux/vm_event_item.h>
-
-struct mem_cgroup;
-struct page_cgroup;
-struct page;
-struct mm_struct;
-
-/* Stats that can be updated by kernel. */
-enum mem_cgroup_page_stat_item {
-	MEMCG_NR_FILE_MAPPED, /* # of pages charged as file rss */
-};
-
-struct mem_cgroup_reclaim_cookie {
-	struct zone *zone;
-	int priority;
-	unsigned int generation;
-};
-
-#ifdef CONFIG_CGROUP_MEM_RES_CTLR
-/*
- * All "charge" functions with gfp_mask should use GFP_KERNEL or
- * (gfp_mask & GFP_RECLAIM_MASK). In current implementatin, memcg doesn't
- * alloc memory but reclaims memory from all available zones. So, "where I want
- * memory from" bits of gfp_mask has no meaning. So any bits of that field is
- * available but adding a rule is better. charge functions' gfp_mask should
- * be set to GFP_KERNEL or gfp_mask & GFP_RECLAIM_MASK for avoiding ambiguous
- * codes.
- * (Of course, if memcg does memory allocation in future, GFP_KERNEL is sane.)
- */
-
-extern int mem_cgroup_newpage_charge(struct page *page, struct mm_struct *mm,
-				gfp_t gfp_mask);
-/* for swap handling */
-extern int mem_cgroup_try_charge_swapin(struct mm_struct *mm,
-		struct page *page, gfp_t mask, struct mem_cgroup **memcgp);
-extern void mem_cgroup_commit_charge_swapin(struct page *page,
-					struct mem_cgroup *memcg);
-extern void mem_cgroup_cancel_charge_swapin(struct mem_cgroup *memcg);
-
-extern int mem_cgroup_cache_charge(struct page *page, struct mm_struct *mm,
-					gfp_t gfp_mask);
-
-struct lruvec *mem_cgroup_zone_lruvec(struct zone *, struct mem_cgroup *);
-struct lruvec *mem_cgroup_lru_add_list(struct zone *, struct page *,
-				       enum lru_list);
-void mem_cgroup_lru_del_list(struct page *, enum lru_list);
-void mem_cgroup_lru_del(struct page *);
-struct lruvec *mem_cgroup_lru_move_lists(struct zone *, struct page *,
-					 enum lru_list, enum lru_list);
-
-/* For coalescing uncharge for reducing memcg' overhead*/
-extern void mem_cgroup_uncharge_start(void);
-extern void mem_cgroup_uncharge_end(void);
-
-extern void mem_cgroup_uncharge_page(struct page *page);
-extern void mem_cgroup_uncharge_cache_page(struct page *page);
-
-extern void mem_cgroup_out_of_memory(struct mem_cgroup *memcg, gfp_t gfp_mask,
-				     int order);
-int task_in_mem_cgroup(struct task_struct *task, const struct mem_cgroup *memcg);
-
-extern struct mem_cgroup *try_get_mem_cgroup_from_page(struct page *page);
-extern struct mem_cgroup *mem_cgroup_from_task(struct task_struct *p);
-extern struct mem_cgroup *try_get_mem_cgroup_from_mm(struct mm_struct *mm);
-
-extern struct mem_cgroup *parent_mem_cgroup(struct mem_cgroup *memcg);
-extern struct mem_cgroup *mem_cgroup_from_cont(struct cgroup *cont);
-
-static inline
-int mm_match_cgroup(const struct mm_struct *mm, const struct mem_cgroup *cgroup)
-{
-	struct mem_cgroup *memcg;
-	rcu_read_lock();
-	memcg = mem_cgroup_from_task(rcu_dereference((mm)->owner));
-	rcu_read_unlock();
-	return cgroup == memcg;
-}
-
-extern struct cgroup_subsys_state *mem_cgroup_css(struct mem_cgroup *memcg);
-
-extern int
-mem_cgroup_prepare_migration(struct page *page,
-	struct page *newpage, struct mem_cgroup **memcgp, gfp_t gfp_mask);
-extern void mem_cgroup_end_migration(struct mem_cgroup *memcg,
-	struct page *oldpage, struct page *newpage, bool migration_ok);
-
-struct mem_cgroup *mem_cgroup_iter(struct mem_cgroup *,
-				   struct mem_cgroup *,
-				   struct mem_cgroup_reclaim_cookie *);
-void mem_cgroup_iter_break(struct mem_cgroup *, struct mem_cgroup *);
-
-/*
- * For memory reclaim.
- */
-int mem_cgroup_inactive_anon_is_low(struct mem_cgroup *memcg,
-				    struct zone *zone);
-int mem_cgroup_inactive_file_is_low(struct mem_cgroup *memcg,
-				    struct zone *zone);
-int mem_cgroup_select_victim_node(struct mem_cgroup *memcg);
-unsigned long mem_cgroup_zone_nr_lru_pages(struct mem_cgroup *memcg,
-					int nid, int zid, unsigned int lrumask);
-struct zone_reclaim_stat *mem_cgroup_get_reclaim_stat(struct mem_cgroup *memcg,
-						      struct zone *zone);
-struct zone_reclaim_stat*
-mem_cgroup_get_reclaim_stat_from_page(struct page *page);
-extern void mem_cgroup_print_oom_info(struct mem_cgroup *memcg,
-					struct task_struct *p);
-extern void mem_cgroup_replace_page_cache(struct page *oldpage,
-					struct page *newpage);
-
-#ifdef CONFIG_CGROUP_MEM_RES_CTLR_SWAP
-extern int do_swap_account;
-#endif
-
-static inline bool mem_cgroup_disabled(void)
-{
-	if (mem_cgroup_subsys.disabled)
-		return true;
-	return false;
-}
-
-void __mem_cgroup_begin_update_page_stat(struct page *page, bool *locked,
-					 unsigned long *flags);
-
-extern atomic_t memcg_moving;
-
-static inline void mem_cgroup_begin_update_page_stat(struct page *page,
-					bool *locked, unsigned long *flags)
-{
-	if (mem_cgroup_disabled())
-		return;
-	rcu_read_lock();
-	*locked = false;
-	if (atomic_read(&memcg_moving))
-		__mem_cgroup_begin_update_page_stat(page, locked, flags);
-}
-
-void __mem_cgroup_end_update_page_stat(struct page *page,
-				unsigned long *flags);
-static inline void mem_cgroup_end_update_page_stat(struct page *page,
-					bool *locked, unsigned long *flags)
-{
-	if (mem_cgroup_disabled())
-		return;
-	if (*locked)
-		__mem_cgroup_end_update_page_stat(page, flags);
-	rcu_read_unlock();
-}
-
-void mem_cgroup_update_page_stat(struct page *page,
-				 enum mem_cgroup_page_stat_item idx,
-				 int val);
-
-static inline void mem_cgroup_inc_page_stat(struct page *page,
-					    enum mem_cgroup_page_stat_item idx)
-{
-	mem_cgroup_update_page_stat(page, idx, 1);
-}
-
-static inline void mem_cgroup_dec_page_stat(struct page *page,
-					    enum mem_cgroup_page_stat_item idx)
-{
-	mem_cgroup_update_page_stat(page, idx, -1);
-}
-
-unsigned long mem_cgroup_soft_limit_reclaim(struct zone *zone, int order,
-						gfp_t gfp_mask,
-						unsigned long *total_scanned);
-u64 mem_cgroup_get_limit(struct mem_cgroup *memcg);
-
-void mem_cgroup_count_vm_event(struct mm_struct *mm, enum vm_event_item idx);
-#ifdef CONFIG_TRANSPARENT_HUGEPAGE
-void mem_cgroup_split_huge_fixup(struct page *head);
-#endif
-
-#ifdef CONFIG_DEBUG_VM
-bool mem_cgroup_bad_page_check(struct page *page);
-void mem_cgroup_print_bad_page(struct page *page);
-#endif
-#else /* CONFIG_CGROUP_MEM_RES_CTLR */
-struct mem_cgroup;
-
-static inline int mem_cgroup_newpage_charge(struct page *page,
-					struct mm_struct *mm, gfp_t gfp_mask)
-{
-	return 0;
-}
-
-static inline int mem_cgroup_cache_charge(struct page *page,
-					struct mm_struct *mm, gfp_t gfp_mask)
-{
-	return 0;
-}
-
-static inline int mem_cgroup_try_charge_swapin(struct mm_struct *mm,
-		struct page *page, gfp_t gfp_mask, struct mem_cgroup **memcgp)
-{
-	return 0;
-}
-
-static inline void mem_cgroup_commit_charge_swapin(struct page *page,
-					  struct mem_cgroup *memcg)
-{
-}
-
-static inline void mem_cgroup_cancel_charge_swapin(struct mem_cgroup *memcg)
-{
-}
-
-static inline void mem_cgroup_uncharge_start(void)
-{
-}
-
-static inline void mem_cgroup_uncharge_end(void)
-{
-}
-
-static inline void mem_cgroup_uncharge_page(struct page *page)
-{
-}
-
-static inline void mem_cgroup_uncharge_cache_page(struct page *page)
-{
-}
-
-static inline struct lruvec *mem_cgroup_zone_lruvec(struct zone *zone,
-						    struct mem_cgroup *memcg)
-{
-	return &zone->lruvec;
-}
-
-static inline struct lruvec *mem_cgroup_lru_add_list(struct zone *zone,
-						     struct page *page,
-						     enum lru_list lru)
-{
-	return &zone->lruvec;
-}
-
-static inline void mem_cgroup_lru_del_list(struct page *page, enum lru_list lru)
-{
-}
-
-static inline void mem_cgroup_lru_del(struct page *page)
-{
-}
-
-static inline struct lruvec *mem_cgroup_lru_move_lists(struct zone *zone,
-						       struct page *page,
-						       enum lru_list from,
-						       enum lru_list to)
-{
-	return &zone->lruvec;
-}
-
-static inline struct mem_cgroup *try_get_mem_cgroup_from_page(struct page *page)
-{
-	return NULL;
-}
-
-static inline struct mem_cgroup *try_get_mem_cgroup_from_mm(struct mm_struct *mm)
-{
-	return NULL;
-}
-
-static inline int mm_match_cgroup(struct mm_struct *mm,
-		struct mem_cgroup *memcg)
-{
-	return 1;
-}
-
-static inline int task_in_mem_cgroup(struct task_struct *task,
-				     const struct mem_cgroup *memcg)
-{
-	return 1;
-}
-
-static inline struct cgroup_subsys_state
-		*mem_cgroup_css(struct mem_cgroup *memcg)
-{
-	return NULL;
-}
-
-static inline int
-mem_cgroup_prepare_migration(struct page *page, struct page *newpage,
-	struct mem_cgroup **memcgp, gfp_t gfp_mask)
-{
-	return 0;
-}
-
-static inline void mem_cgroup_end_migration(struct mem_cgroup *memcg,
-		struct page *oldpage, struct page *newpage, bool migration_ok)
-{
-}
-
-static inline struct mem_cgroup *
-mem_cgroup_iter(struct mem_cgroup *root,
-		struct mem_cgroup *prev,
-		struct mem_cgroup_reclaim_cookie *reclaim)
-{
-	return NULL;
-}
-
-static inline void mem_cgroup_iter_break(struct mem_cgroup *root,
-					 struct mem_cgroup *prev)
-{
-}
-
-static inline bool mem_cgroup_disabled(void)
-{
-	return true;
-}
-
-static inline int
-mem_cgroup_inactive_anon_is_low(struct mem_cgroup *memcg, struct zone *zone)
-{
-	return 1;
-}
-
-static inline int
-mem_cgroup_inactive_file_is_low(struct mem_cgroup *memcg, struct zone *zone)
-{
-	return 1;
-}
-
-static inline unsigned long
-mem_cgroup_zone_nr_lru_pages(struct mem_cgroup *memcg, int nid, int zid,
-				unsigned int lru_mask)
-{
-	return 0;
-}
-
-
-static inline struct zone_reclaim_stat*
-mem_cgroup_get_reclaim_stat(struct mem_cgroup *memcg, struct zone *zone)
-{
-	return NULL;
-}
-
-static inline struct zone_reclaim_stat*
-mem_cgroup_get_reclaim_stat_from_page(struct page *page)
-{
-	return NULL;
-}
-
-static inline void
-mem_cgroup_print_oom_info(struct mem_cgroup *memcg, struct task_struct *p)
-{
-}
-
-static inline void mem_cgroup_begin_update_page_stat(struct page *page,
-					bool *locked, unsigned long *flags)
-{
-}
-
-static inline void mem_cgroup_end_update_page_stat(struct page *page,
-					bool *locked, unsigned long *flags)
-{
-}
-
-static inline void mem_cgroup_inc_page_stat(struct page *page,
-					    enum mem_cgroup_page_stat_item idx)
-{
-}
-
-static inline void mem_cgroup_dec_page_stat(struct page *page,
-					    enum mem_cgroup_page_stat_item idx)
-{
-}
-
-static inline
-unsigned long mem_cgroup_soft_limit_reclaim(struct zone *zone, int order,
-					    gfp_t gfp_mask,
-					    unsigned long *total_scanned)
-{
-	return 0;
-}
-
-static inline
-u64 mem_cgroup_get_limit(struct mem_cgroup *memcg)
-{
-	return 0;
-}
-
-static inline void mem_cgroup_split_huge_fixup(struct page *head)
-{
-}
-
-static inline
-void mem_cgroup_count_vm_event(struct mm_struct *mm, enum vm_event_item idx)
-{
-}
-static inline void mem_cgroup_replace_page_cache(struct page *oldpage,
-				struct page *newpage)
-{
-}
-#endif /* CONFIG_CGROUP_MEM_RES_CTLR */
-
-#if !defined(CONFIG_CGROUP_MEM_RES_CTLR) || !defined(CONFIG_DEBUG_VM)
-static inline bool
-mem_cgroup_bad_page_check(struct page *page)
-{
-	return false;
-}
-
-static inline void
-mem_cgroup_print_bad_page(struct page *page)
-{
-}
-#endif
-
-enum {
-	UNDER_LIMIT,
-	SOFT_LIMIT,
-	OVER_LIMIT,
-};
-
-struct sock;
-#ifdef CONFIG_CGROUP_MEM_RES_CTLR_KMEM
-void sock_update_memcg(struct sock *sk);
-void sock_release_memcg(struct sock *sk);
-#else
-static inline void sock_update_memcg(struct sock *sk)
-{
-}
-static inline void sock_release_memcg(struct sock *sk)
-{
-}
-#endif /* CONFIG_CGROUP_MEM_RES_CTLR_KMEM */
-#endif /* _LINUX_MEMCONTROL_H */
-
diff --git a/ANDROID_3.4.5/include/linux/memory.h b/ANDROID_3.4.5/include/linux/memory.h
deleted file mode 100644
index 1ac7f6e4..00000000
--- a/ANDROID_3.4.5/include/linux/memory.h
+++ /dev/null
@@ -1,154 +0,0 @@
-/*
- * include/linux/memory.h - generic memory definition
- *
- * This is mainly for topological representation. We define the
- * basic "struct memory_block" here, which can be embedded in per-arch
- * definitions or NUMA information.
- *
- * Basic handling of the devices is done in drivers/base/memory.c
- * and system devices are handled in drivers/base/sys.c.
- *
- * Memory block are exported via sysfs in the class/memory/devices/
- * directory.
- *
- */
-#ifndef _LINUX_MEMORY_H_
-#define _LINUX_MEMORY_H_
-
-#include <linux/node.h>
-#include <linux/compiler.h>
-#include <linux/mutex.h>
-
-#define MIN_MEMORY_BLOCK_SIZE     (1 << SECTION_SIZE_BITS)
-
-struct memory_block {
-	unsigned long start_section_nr;
-	unsigned long end_section_nr;
-	unsigned long state;
-	int section_count;
-
-	/*
-	 * This serializes all state change requests.  It isn't
-	 * held during creation because the control files are
-	 * created long after the critical areas during
-	 * initialization.
-	 */
-	struct mutex state_mutex;
-	int phys_device;		/* to which fru does this belong? */
-	void *hw;			/* optional pointer to fw/hw data */
-	int (*phys_callback)(struct memory_block *);
-	struct device dev;
-};
-
-int arch_get_memory_phys_device(unsigned long start_pfn);
-
-/* These states are exposed to userspace as text strings in sysfs */
-#define	MEM_ONLINE		(1<<0) /* exposed to userspace */
-#define	MEM_GOING_OFFLINE	(1<<1) /* exposed to userspace */
-#define	MEM_OFFLINE		(1<<2) /* exposed to userspace */
-#define	MEM_GOING_ONLINE	(1<<3)
-#define	MEM_CANCEL_ONLINE	(1<<4)
-#define	MEM_CANCEL_OFFLINE	(1<<5)
-
-struct memory_notify {
-	unsigned long start_pfn;
-	unsigned long nr_pages;
-	int status_change_nid;
-};
-
-/*
- * During pageblock isolation, count the number of pages within the
- * range [start_pfn, start_pfn + nr_pages) which are owned by code
- * in the notifier chain.
- */
-#define MEM_ISOLATE_COUNT	(1<<0)
-
-struct memory_isolate_notify {
-	unsigned long start_pfn;	/* Start of range to check */
-	unsigned int nr_pages;		/* # pages in range to check */
-	unsigned int pages_found;	/* # pages owned found by callbacks */
-};
-
-struct notifier_block;
-struct mem_section;
-
-/*
- * Priorities for the hotplug memory callback routines (stored in decreasing
- * order in the callback chain)
- */
-#define SLAB_CALLBACK_PRI       1
-#define IPC_CALLBACK_PRI        10
-
-#ifndef CONFIG_MEMORY_HOTPLUG_SPARSE
-static inline int memory_dev_init(void)
-{
-	return 0;
-}
-static inline int register_memory_notifier(struct notifier_block *nb)
-{
-	return 0;
-}
-static inline void unregister_memory_notifier(struct notifier_block *nb)
-{
-}
-static inline int memory_notify(unsigned long val, void *v)
-{
-	return 0;
-}
-static inline int register_memory_isolate_notifier(struct notifier_block *nb)
-{
-	return 0;
-}
-static inline void unregister_memory_isolate_notifier(struct notifier_block *nb)
-{
-}
-static inline int memory_isolate_notify(unsigned long val, void *v)
-{
-	return 0;
-}
-#else
-extern int register_memory_notifier(struct notifier_block *nb);
-extern void unregister_memory_notifier(struct notifier_block *nb);
-extern int register_memory_isolate_notifier(struct notifier_block *nb);
-extern void unregister_memory_isolate_notifier(struct notifier_block *nb);
-extern int register_new_memory(int, struct mem_section *);
-extern int unregister_memory_section(struct mem_section *);
-extern int memory_dev_init(void);
-extern int remove_memory_block(unsigned long, struct mem_section *, int);
-extern int memory_notify(unsigned long val, void *v);
-extern int memory_isolate_notify(unsigned long val, void *v);
-extern struct memory_block *find_memory_block_hinted(struct mem_section *,
-							struct memory_block *);
-extern struct memory_block *find_memory_block(struct mem_section *);
-#define CONFIG_MEM_BLOCK_SIZE	(PAGES_PER_SECTION<<PAGE_SHIFT)
-enum mem_add_context { BOOT, HOTPLUG };
-#endif /* CONFIG_MEMORY_HOTPLUG_SPARSE */
-
-#ifdef CONFIG_MEMORY_HOTPLUG
-#define hotplug_memory_notifier(fn, pri) {			\
-	static __meminitdata struct notifier_block fn##_mem_nb =\
-		{ .notifier_call = fn, .priority = pri };	\
-	register_memory_notifier(&fn##_mem_nb);			\
-}
-#else
-#define hotplug_memory_notifier(fn, pri) do { } while (0)
-#endif
-
-/*
- * 'struct memory_accessor' is a generic interface to provide
- * in-kernel access to persistent memory such as i2c or SPI EEPROMs
- */
-struct memory_accessor {
-	ssize_t (*read)(struct memory_accessor *, char *buf, off_t offset,
-			size_t count);
-	ssize_t (*write)(struct memory_accessor *, const char *buf,
-			 off_t offset, size_t count);
-};
-
-/*
- * Kernel text modification mutex, used for code patching. Users of this lock
- * can sleep.
- */
-extern struct mutex text_mutex;
-
-#endif /* _LINUX_MEMORY_H_ */
diff --git a/ANDROID_3.4.5/include/linux/memory_hotplug.h b/ANDROID_3.4.5/include/linux/memory_hotplug.h
deleted file mode 100644
index 910550f3..00000000
--- a/ANDROID_3.4.5/include/linux/memory_hotplug.h
+++ /dev/null
@@ -1,243 +0,0 @@
-#ifndef __LINUX_MEMORY_HOTPLUG_H
-#define __LINUX_MEMORY_HOTPLUG_H
-
-#include <linux/mmzone.h>
-#include <linux/spinlock.h>
-#include <linux/notifier.h>
-#include <linux/bug.h>
-
-struct page;
-struct zone;
-struct pglist_data;
-struct mem_section;
-
-#ifdef CONFIG_MEMORY_HOTPLUG
-
-/*
- * Types for free bootmem stored in page->lru.next. These have to be in
- * some random range in unsigned long space for debugging purposes.
- */
-enum {
-	MEMORY_HOTPLUG_MIN_BOOTMEM_TYPE = 12,
-	SECTION_INFO = MEMORY_HOTPLUG_MIN_BOOTMEM_TYPE,
-	MIX_SECTION_INFO,
-	NODE_INFO,
-	MEMORY_HOTPLUG_MAX_BOOTMEM_TYPE = NODE_INFO,
-};
-
-/*
- * pgdat resizing functions
- */
-static inline
-void pgdat_resize_lock(struct pglist_data *pgdat, unsigned long *flags)
-{
-	spin_lock_irqsave(&pgdat->node_size_lock, *flags);
-}
-static inline
-void pgdat_resize_unlock(struct pglist_data *pgdat, unsigned long *flags)
-{
-	spin_unlock_irqrestore(&pgdat->node_size_lock, *flags);
-}
-static inline
-void pgdat_resize_init(struct pglist_data *pgdat)
-{
-	spin_lock_init(&pgdat->node_size_lock);
-}
-/*
- * Zone resizing functions
- */
-static inline unsigned zone_span_seqbegin(struct zone *zone)
-{
-	return read_seqbegin(&zone->span_seqlock);
-}
-static inline int zone_span_seqretry(struct zone *zone, unsigned iv)
-{
-	return read_seqretry(&zone->span_seqlock, iv);
-}
-static inline void zone_span_writelock(struct zone *zone)
-{
-	write_seqlock(&zone->span_seqlock);
-}
-static inline void zone_span_writeunlock(struct zone *zone)
-{
-	write_sequnlock(&zone->span_seqlock);
-}
-static inline void zone_seqlock_init(struct zone *zone)
-{
-	seqlock_init(&zone->span_seqlock);
-}
-extern int zone_grow_free_lists(struct zone *zone, unsigned long new_nr_pages);
-extern int zone_grow_waitqueues(struct zone *zone, unsigned long nr_pages);
-extern int add_one_highpage(struct page *page, int pfn, int bad_ppro);
-/* VM interface that may be used by firmware interface */
-extern int online_pages(unsigned long, unsigned long);
-extern void __offline_isolated_pages(unsigned long, unsigned long);
-
-typedef void (*online_page_callback_t)(struct page *page);
-
-extern int set_online_page_callback(online_page_callback_t callback);
-extern int restore_online_page_callback(online_page_callback_t callback);
-
-extern void __online_page_set_limits(struct page *page);
-extern void __online_page_increment_counters(struct page *page);
-extern void __online_page_free(struct page *page);
-
-#ifdef CONFIG_MEMORY_HOTREMOVE
-extern bool is_pageblock_removable_nolock(struct page *page);
-#endif /* CONFIG_MEMORY_HOTREMOVE */
-
-/* reasonably generic interface to expand the physical pages in a zone  */
-extern int __add_pages(int nid, struct zone *zone, unsigned long start_pfn,
-	unsigned long nr_pages);
-extern int __remove_pages(struct zone *zone, unsigned long start_pfn,
-	unsigned long nr_pages);
-
-#ifdef CONFIG_NUMA
-extern int memory_add_physaddr_to_nid(u64 start);
-#else
-static inline int memory_add_physaddr_to_nid(u64 start)
-{
-	return 0;
-}
-#endif
-
-#ifdef CONFIG_HAVE_ARCH_NODEDATA_EXTENSION
-/*
- * For supporting node-hotadd, we have to allocate a new pgdat.
- *
- * If an arch has generic style NODE_DATA(),
- * node_data[nid] = kzalloc() works well. But it depends on the architecture.
- *
- * In general, generic_alloc_nodedata() is used.
- * Now, arch_free_nodedata() is just defined for error path of node_hot_add.
- *
- */
-extern pg_data_t *arch_alloc_nodedata(int nid);
-extern void arch_free_nodedata(pg_data_t *pgdat);
-extern void arch_refresh_nodedata(int nid, pg_data_t *pgdat);
-
-#else /* CONFIG_HAVE_ARCH_NODEDATA_EXTENSION */
-
-#define arch_alloc_nodedata(nid)	generic_alloc_nodedata(nid)
-#define arch_free_nodedata(pgdat)	generic_free_nodedata(pgdat)
-
-#ifdef CONFIG_NUMA
-/*
- * If ARCH_HAS_NODEDATA_EXTENSION=n, this func is used to allocate pgdat.
- * XXX: kmalloc_node() can't work well to get new node's memory at this time.
- *	Because, pgdat for the new node is not allocated/initialized yet itself.
- *	To use new node's memory, more consideration will be necessary.
- */
-#define generic_alloc_nodedata(nid)				\
-({								\
-	kzalloc(sizeof(pg_data_t), GFP_KERNEL);			\
-})
-/*
- * This definition is just for error path in node hotadd.
- * For node hotremove, we have to replace this.
- */
-#define generic_free_nodedata(pgdat)	kfree(pgdat)
-
-extern pg_data_t *node_data[];
-static inline void arch_refresh_nodedata(int nid, pg_data_t *pgdat)
-{
-	node_data[nid] = pgdat;
-}
-
-#else /* !CONFIG_NUMA */
-
-/* never called */
-static inline pg_data_t *generic_alloc_nodedata(int nid)
-{
-	BUG();
-	return NULL;
-}
-static inline void generic_free_nodedata(pg_data_t *pgdat)
-{
-}
-static inline void arch_refresh_nodedata(int nid, pg_data_t *pgdat)
-{
-}
-#endif /* CONFIG_NUMA */
-#endif /* CONFIG_HAVE_ARCH_NODEDATA_EXTENSION */
-
-#ifdef CONFIG_SPARSEMEM_VMEMMAP
-static inline void register_page_bootmem_info_node(struct pglist_data *pgdat)
-{
-}
-static inline void put_page_bootmem(struct page *page)
-{
-}
-#else
-extern void register_page_bootmem_info_node(struct pglist_data *pgdat);
-extern void put_page_bootmem(struct page *page);
-#endif
-
-/*
- * Lock for memory hotplug guarantees 1) all callbacks for memory hotplug
- * notifier will be called under this. 2) offline/online/add/remove memory
- * will not run simultaneously.
- */
-
-void lock_memory_hotplug(void);
-void unlock_memory_hotplug(void);
-
-#else /* ! CONFIG_MEMORY_HOTPLUG */
-/*
- * Stub functions for when hotplug is off
- */
-static inline void pgdat_resize_lock(struct pglist_data *p, unsigned long *f) {}
-static inline void pgdat_resize_unlock(struct pglist_data *p, unsigned long *f) {}
-static inline void pgdat_resize_init(struct pglist_data *pgdat) {}
-
-static inline unsigned zone_span_seqbegin(struct zone *zone)
-{
-	return 0;
-}
-static inline int zone_span_seqretry(struct zone *zone, unsigned iv)
-{
-	return 0;
-}
-static inline void zone_span_writelock(struct zone *zone) {}
-static inline void zone_span_writeunlock(struct zone *zone) {}
-static inline void zone_seqlock_init(struct zone *zone) {}
-
-static inline int mhp_notimplemented(const char *func)
-{
-	printk(KERN_WARNING "%s() called, with CONFIG_MEMORY_HOTPLUG disabled\n", func);
-	dump_stack();
-	return -ENOSYS;
-}
-
-static inline void register_page_bootmem_info_node(struct pglist_data *pgdat)
-{
-}
-
-static inline void lock_memory_hotplug(void) {}
-static inline void unlock_memory_hotplug(void) {}
-
-#endif /* ! CONFIG_MEMORY_HOTPLUG */
-
-#ifdef CONFIG_MEMORY_HOTREMOVE
-
-extern int is_mem_section_removable(unsigned long pfn, unsigned long nr_pages);
-
-#else
-static inline int is_mem_section_removable(unsigned long pfn,
-					unsigned long nr_pages)
-{
-	return 0;
-}
-#endif /* CONFIG_MEMORY_HOTREMOVE */
-
-extern int mem_online_node(int nid);
-extern int add_memory(int nid, u64 start, u64 size);
-extern int arch_add_memory(int nid, u64 start, u64 size);
-extern int remove_memory(u64 start, u64 size);
-extern int sparse_add_one_section(struct zone *zone, unsigned long start_pfn,
-								int nr_pages);
-extern void sparse_remove_one_section(struct zone *zone, struct mem_section *ms);
-extern struct page *sparse_decode_mem_map(unsigned long coded_mem_map,
-					  unsigned long pnum);
-
-#endif /* __LINUX_MEMORY_HOTPLUG_H */
diff --git a/ANDROID_3.4.5/include/linux/mempolicy.h b/ANDROID_3.4.5/include/linux/mempolicy.h
deleted file mode 100644
index 7c727a90..00000000
--- a/ANDROID_3.4.5/include/linux/mempolicy.h
+++ /dev/null
@@ -1,385 +0,0 @@
-#ifndef _LINUX_MEMPOLICY_H
-#define _LINUX_MEMPOLICY_H 1
-
-#include <linux/errno.h>
-
-/*
- * NUMA memory policies for Linux.
- * Copyright 2003,2004 Andi Kleen SuSE Labs
- */
-
-/*
- * Both the MPOL_* mempolicy mode and the MPOL_F_* optional mode flags are
- * passed by the user to either set_mempolicy() or mbind() in an 'int' actual.
- * The MPOL_MODE_FLAGS macro determines the legal set of optional mode flags.
- */
-
-/* Policies */
-enum {
-	MPOL_DEFAULT,
-	MPOL_PREFERRED,
-	MPOL_BIND,
-	MPOL_INTERLEAVE,
-	MPOL_MAX,	/* always last member of enum */
-};
-
-enum mpol_rebind_step {
-	MPOL_REBIND_ONCE,	/* do rebind work at once(not by two step) */
-	MPOL_REBIND_STEP1,	/* first step(set all the newly nodes) */
-	MPOL_REBIND_STEP2,	/* second step(clean all the disallowed nodes)*/
-	MPOL_REBIND_NSTEP,
-};
-
-/* Flags for set_mempolicy */
-#define MPOL_F_STATIC_NODES	(1 << 15)
-#define MPOL_F_RELATIVE_NODES	(1 << 14)
-
-/*
- * MPOL_MODE_FLAGS is the union of all possible optional mode flags passed to
- * either set_mempolicy() or mbind().
- */
-#define MPOL_MODE_FLAGS	(MPOL_F_STATIC_NODES | MPOL_F_RELATIVE_NODES)
-
-/* Flags for get_mempolicy */
-#define MPOL_F_NODE	(1<<0)	/* return next IL mode instead of node mask */
-#define MPOL_F_ADDR	(1<<1)	/* look up vma using address */
-#define MPOL_F_MEMS_ALLOWED (1<<2) /* return allowed memories */
-
-/* Flags for mbind */
-#define MPOL_MF_STRICT	(1<<0)	/* Verify existing pages in the mapping */
-#define MPOL_MF_MOVE	(1<<1)	/* Move pages owned by this process to conform to mapping */
-#define MPOL_MF_MOVE_ALL (1<<2)	/* Move every page to conform to mapping */
-#define MPOL_MF_INTERNAL (1<<3)	/* Internal flags start here */
-
-/*
- * Internal flags that share the struct mempolicy flags word with
- * "mode flags".  These flags are allocated from bit 0 up, as they
- * are never OR'ed into the mode in mempolicy API arguments.
- */
-#define MPOL_F_SHARED  (1 << 0)	/* identify shared policies */
-#define MPOL_F_LOCAL   (1 << 1)	/* preferred local allocation */
-#define MPOL_F_REBINDING (1 << 2)	/* identify policies in rebinding */
-
-#ifdef __KERNEL__
-
-#include <linux/mmzone.h>
-#include <linux/slab.h>
-#include <linux/rbtree.h>
-#include <linux/spinlock.h>
-#include <linux/nodemask.h>
-#include <linux/pagemap.h>
-
-struct mm_struct;
-
-#ifdef CONFIG_NUMA
-
-/*
- * Describe a memory policy.
- *
- * A mempolicy can be either associated with a process or with a VMA.
- * For VMA related allocations the VMA policy is preferred, otherwise
- * the process policy is used. Interrupts ignore the memory policy
- * of the current process.
- *
- * Locking policy for interlave:
- * In process context there is no locking because only the process accesses
- * its own state. All vma manipulation is somewhat protected by a down_read on
- * mmap_sem.
- *
- * Freeing policy:
- * Mempolicy objects are reference counted.  A mempolicy will be freed when
- * mpol_put() decrements the reference count to zero.
- *
- * Duplicating policy objects:
- * mpol_dup() allocates a new mempolicy and copies the specified mempolicy
- * to the new storage.  The reference count of the new object is initialized
- * to 1, representing the caller of mpol_dup().
- */
-struct mempolicy {
-	atomic_t refcnt;
-	unsigned short mode; 	/* See MPOL_* above */
-	unsigned short flags;	/* See set_mempolicy() MPOL_F_* above */
-	union {
-		short 		 preferred_node; /* preferred */
-		nodemask_t	 nodes;		/* interleave/bind */
-		/* undefined for default */
-	} v;
-	union {
-		nodemask_t cpuset_mems_allowed;	/* relative to these nodes */
-		nodemask_t user_nodemask;	/* nodemask passed by user */
-	} w;
-};
-
-/*
- * Support for managing mempolicy data objects (clone, copy, destroy)
- * The default fast path of a NULL MPOL_DEFAULT policy is always inlined.
- */
-
-extern void __mpol_put(struct mempolicy *pol);
-static inline void mpol_put(struct mempolicy *pol)
-{
-	if (pol)
-		__mpol_put(pol);
-}
-
-/*
- * Does mempolicy pol need explicit unref after use?
- * Currently only needed for shared policies.
- */
-static inline int mpol_needs_cond_ref(struct mempolicy *pol)
-{
-	return (pol && (pol->flags & MPOL_F_SHARED));
-}
-
-static inline void mpol_cond_put(struct mempolicy *pol)
-{
-	if (mpol_needs_cond_ref(pol))
-		__mpol_put(pol);
-}
-
-extern struct mempolicy *__mpol_cond_copy(struct mempolicy *tompol,
-					  struct mempolicy *frompol);
-static inline struct mempolicy *mpol_cond_copy(struct mempolicy *tompol,
-						struct mempolicy *frompol)
-{
-	if (!frompol)
-		return frompol;
-	return __mpol_cond_copy(tompol, frompol);
-}
-
-extern struct mempolicy *__mpol_dup(struct mempolicy *pol);
-static inline struct mempolicy *mpol_dup(struct mempolicy *pol)
-{
-	if (pol)
-		pol = __mpol_dup(pol);
-	return pol;
-}
-
-#define vma_policy(vma) ((vma)->vm_policy)
-#define vma_set_policy(vma, pol) ((vma)->vm_policy = (pol))
-
-static inline void mpol_get(struct mempolicy *pol)
-{
-	if (pol)
-		atomic_inc(&pol->refcnt);
-}
-
-extern bool __mpol_equal(struct mempolicy *a, struct mempolicy *b);
-static inline bool mpol_equal(struct mempolicy *a, struct mempolicy *b)
-{
-	if (a == b)
-		return true;
-	return __mpol_equal(a, b);
-}
-
-/*
- * Tree of shared policies for a shared memory region.
- * Maintain the policies in a pseudo mm that contains vmas. The vmas
- * carry the policy. As a special twist the pseudo mm is indexed in pages, not
- * bytes, so that we can work with shared memory segments bigger than
- * unsigned long.
- */
-
-struct sp_node {
-	struct rb_node nd;
-	unsigned long start, end;
-	struct mempolicy *policy;
-};
-
-struct shared_policy {
-	struct rb_root root;
-	spinlock_t lock;
-};
-
-void mpol_shared_policy_init(struct shared_policy *sp, struct mempolicy *mpol);
-int mpol_set_shared_policy(struct shared_policy *info,
-				struct vm_area_struct *vma,
-				struct mempolicy *new);
-void mpol_free_shared_policy(struct shared_policy *p);
-struct mempolicy *mpol_shared_policy_lookup(struct shared_policy *sp,
-					    unsigned long idx);
-
-struct mempolicy *get_vma_policy(struct task_struct *tsk,
-		struct vm_area_struct *vma, unsigned long addr);
-
-extern void numa_default_policy(void);
-extern void numa_policy_init(void);
-extern void mpol_rebind_task(struct task_struct *tsk, const nodemask_t *new,
-				enum mpol_rebind_step step);
-extern void mpol_rebind_mm(struct mm_struct *mm, nodemask_t *new);
-extern void mpol_fix_fork_child_flag(struct task_struct *p);
-
-extern struct zonelist *huge_zonelist(struct vm_area_struct *vma,
-				unsigned long addr, gfp_t gfp_flags,
-				struct mempolicy **mpol, nodemask_t **nodemask);
-extern bool init_nodemask_of_mempolicy(nodemask_t *mask);
-extern bool mempolicy_nodemask_intersects(struct task_struct *tsk,
-				const nodemask_t *mask);
-extern unsigned slab_node(struct mempolicy *policy);
-
-extern enum zone_type policy_zone;
-
-static inline void check_highest_zone(enum zone_type k)
-{
-	if (k > policy_zone && k != ZONE_MOVABLE)
-		policy_zone = k;
-}
-
-int do_migrate_pages(struct mm_struct *mm,
-	const nodemask_t *from_nodes, const nodemask_t *to_nodes, int flags);
-
-
-#ifdef CONFIG_TMPFS
-extern int mpol_parse_str(char *str, struct mempolicy **mpol, int no_context);
-#endif
-
-extern int mpol_to_str(char *buffer, int maxlen, struct mempolicy *pol,
-			int no_context);
-
-/* Check if a vma is migratable */
-static inline int vma_migratable(struct vm_area_struct *vma)
-{
-	if (vma->vm_flags & (VM_IO|VM_HUGETLB|VM_PFNMAP|VM_RESERVED))
-		return 0;
-	/*
-	 * Migration allocates pages in the highest zone. If we cannot
-	 * do so then migration (at least from node to node) is not
-	 * possible.
-	 */
-	if (vma->vm_file &&
-		gfp_zone(mapping_gfp_mask(vma->vm_file->f_mapping))
-								< policy_zone)
-			return 0;
-	return 1;
-}
-
-#else
-
-struct mempolicy {};
-
-static inline bool mpol_equal(struct mempolicy *a, struct mempolicy *b)
-{
-	return true;
-}
-
-static inline void mpol_put(struct mempolicy *p)
-{
-}
-
-static inline void mpol_cond_put(struct mempolicy *pol)
-{
-}
-
-static inline struct mempolicy *mpol_cond_copy(struct mempolicy *to,
-						struct mempolicy *from)
-{
-	return from;
-}
-
-static inline void mpol_get(struct mempolicy *pol)
-{
-}
-
-static inline struct mempolicy *mpol_dup(struct mempolicy *old)
-{
-	return NULL;
-}
-
-struct shared_policy {};
-
-static inline int mpol_set_shared_policy(struct shared_policy *info,
-					struct vm_area_struct *vma,
-					struct mempolicy *new)
-{
-	return -EINVAL;
-}
-
-static inline void mpol_shared_policy_init(struct shared_policy *sp,
-						struct mempolicy *mpol)
-{
-}
-
-static inline void mpol_free_shared_policy(struct shared_policy *p)
-{
-}
-
-static inline struct mempolicy *
-mpol_shared_policy_lookup(struct shared_policy *sp, unsigned long idx)
-{
-	return NULL;
-}
-
-#define vma_policy(vma) NULL
-#define vma_set_policy(vma, pol) do {} while(0)
-
-static inline void numa_policy_init(void)
-{
-}
-
-static inline void numa_default_policy(void)
-{
-}
-
-static inline void mpol_rebind_task(struct task_struct *tsk,
-				const nodemask_t *new,
-				enum mpol_rebind_step step)
-{
-}
-
-static inline void mpol_rebind_mm(struct mm_struct *mm, nodemask_t *new)
-{
-}
-
-static inline void mpol_fix_fork_child_flag(struct task_struct *p)
-{
-}
-
-static inline struct zonelist *huge_zonelist(struct vm_area_struct *vma,
-				unsigned long addr, gfp_t gfp_flags,
-				struct mempolicy **mpol, nodemask_t **nodemask)
-{
-	*mpol = NULL;
-	*nodemask = NULL;
-	return node_zonelist(0, gfp_flags);
-}
-
-static inline bool init_nodemask_of_mempolicy(nodemask_t *m)
-{
-	return false;
-}
-
-static inline bool mempolicy_nodemask_intersects(struct task_struct *tsk,
-			const nodemask_t *mask)
-{
-	return false;
-}
-
-static inline int do_migrate_pages(struct mm_struct *mm,
-			const nodemask_t *from_nodes,
-			const nodemask_t *to_nodes, int flags)
-{
-	return 0;
-}
-
-static inline void check_highest_zone(int k)
-{
-}
-
-#ifdef CONFIG_TMPFS
-static inline int mpol_parse_str(char *str, struct mempolicy **mpol,
-				int no_context)
-{
-	return 1;	/* error */
-}
-#endif
-
-static inline int mpol_to_str(char *buffer, int maxlen, struct mempolicy *pol,
-				int no_context)
-{
-	return 0;
-}
-
-#endif /* CONFIG_NUMA */
-#endif /* __KERNEL__ */
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/mempool.h b/ANDROID_3.4.5/include/linux/mempool.h
deleted file mode 100644
index 7c08052e..00000000
--- a/ANDROID_3.4.5/include/linux/mempool.h
+++ /dev/null
@@ -1,73 +0,0 @@
-/*
- * memory buffer pool support
- */
-#ifndef _LINUX_MEMPOOL_H
-#define _LINUX_MEMPOOL_H
-
-#include <linux/wait.h>
-
-struct kmem_cache;
-
-typedef void * (mempool_alloc_t)(gfp_t gfp_mask, void *pool_data);
-typedef void (mempool_free_t)(void *element, void *pool_data);
-
-typedef struct mempool_s {
-	spinlock_t lock;
-	int min_nr;		/* nr of elements at *elements */
-	int curr_nr;		/* Current nr of elements at *elements */
-	void **elements;
-
-	void *pool_data;
-	mempool_alloc_t *alloc;
-	mempool_free_t *free;
-	wait_queue_head_t wait;
-} mempool_t;
-
-extern mempool_t *mempool_create(int min_nr, mempool_alloc_t *alloc_fn,
-			mempool_free_t *free_fn, void *pool_data);
-extern mempool_t *mempool_create_node(int min_nr, mempool_alloc_t *alloc_fn,
-			mempool_free_t *free_fn, void *pool_data, int nid);
-
-extern int mempool_resize(mempool_t *pool, int new_min_nr, gfp_t gfp_mask);
-extern void mempool_destroy(mempool_t *pool);
-extern void * mempool_alloc(mempool_t *pool, gfp_t gfp_mask);
-extern void mempool_free(void *element, mempool_t *pool);
-
-/*
- * A mempool_alloc_t and mempool_free_t that get the memory from
- * a slab that is passed in through pool_data.
- */
-void *mempool_alloc_slab(gfp_t gfp_mask, void *pool_data);
-void mempool_free_slab(void *element, void *pool_data);
-static inline mempool_t *
-mempool_create_slab_pool(int min_nr, struct kmem_cache *kc)
-{
-	return mempool_create(min_nr, mempool_alloc_slab, mempool_free_slab,
-			      (void *) kc);
-}
-
-/*
- * a mempool_alloc_t and a mempool_free_t to kmalloc and kfree the
- * amount of memory specified by pool_data
- */
-void *mempool_kmalloc(gfp_t gfp_mask, void *pool_data);
-void mempool_kfree(void *element, void *pool_data);
-static inline mempool_t *mempool_create_kmalloc_pool(int min_nr, size_t size)
-{
-	return mempool_create(min_nr, mempool_kmalloc, mempool_kfree,
-			      (void *) size);
-}
-
-/*
- * A mempool_alloc_t and mempool_free_t for a simple page allocator that
- * allocates pages of the order specified by pool_data
- */
-void *mempool_alloc_pages(gfp_t gfp_mask, void *pool_data);
-void mempool_free_pages(void *element, void *pool_data);
-static inline mempool_t *mempool_create_page_pool(int min_nr, int order)
-{
-	return mempool_create(min_nr, mempool_alloc_pages, mempool_free_pages,
-			      (void *)(long)order);
-}
-
-#endif /* _LINUX_MEMPOOL_H */
diff --git a/ANDROID_3.4.5/include/linux/memstick.h b/ANDROID_3.4.5/include/linux/memstick.h
deleted file mode 100644
index 690c35a9..00000000
--- a/ANDROID_3.4.5/include/linux/memstick.h
+++ /dev/null
@@ -1,347 +0,0 @@
-/*
- *  Sony MemoryStick support
- *
- *  Copyright (C) 2007 Alex Dubov <oakad@yahoo.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#ifndef _MEMSTICK_H
-#define _MEMSTICK_H
-
-#include <linux/workqueue.h>
-#include <linux/scatterlist.h>
-#include <linux/device.h>
-
-/*** Hardware based structures ***/
-
-struct ms_status_register {
-	unsigned char reserved;
-	unsigned char interrupt;
-#define MEMSTICK_INT_CMDNAK 0x01
-#define MEMSTICK_INT_IOREQ  0x08
-#define MEMSTICK_INT_IOBREQ 0x10
-#define MEMSTICK_INT_BREQ   0x20
-#define MEMSTICK_INT_ERR    0x40
-#define MEMSTICK_INT_CED    0x80
-
-	unsigned char status0;
-#define MEMSTICK_STATUS0_WP  0x01
-#define MEMSTICK_STATUS0_SL  0x02
-#define MEMSTICK_STATUS0_BF  0x10
-#define MEMSTICK_STATUS0_BE  0x20
-#define MEMSTICK_STATUS0_FB0 0x40
-#define MEMSTICK_STATUS0_MB  0x80
-
-	unsigned char status1;
-#define MEMSTICK_STATUS1_UCFG 0x01
-#define MEMSTICK_STATUS1_FGER 0x02
-#define MEMSTICK_STATUS1_UCEX 0x04
-#define MEMSTICK_STATUS1_EXER 0x08
-#define MEMSTICK_STATUS1_UCDT 0x10
-#define MEMSTICK_STATUS1_DTER 0x20
-#define MEMSTICK_STATUS1_FB1  0x40
-#define MEMSTICK_STATUS1_MB   0x80
-} __attribute__((packed));
-
-struct ms_id_register {
-	unsigned char type;
-	unsigned char if_mode;
-	unsigned char category;
-	unsigned char class;
-} __attribute__((packed));
-
-struct ms_param_register {
-	unsigned char system;
-#define MEMSTICK_SYS_PAM  0x08
-#define MEMSTICK_SYS_BAMD 0x80
-
-	unsigned char block_address_msb;
-	unsigned short block_address;
-	unsigned char cp;
-#define MEMSTICK_CP_BLOCK     0x00
-#define MEMSTICK_CP_PAGE      0x20
-#define MEMSTICK_CP_EXTRA     0x40
-#define MEMSTICK_CP_OVERWRITE 0x80
-
-	unsigned char page_address;
-} __attribute__((packed));
-
-struct ms_extra_data_register {
-	unsigned char  overwrite_flag;
-#define MEMSTICK_OVERWRITE_UDST  0x10
-#define MEMSTICK_OVERWRITE_PGST1 0x20
-#define MEMSTICK_OVERWRITE_PGST0 0x40
-#define MEMSTICK_OVERWRITE_BKST  0x80
-
-	unsigned char  management_flag;
-#define MEMSTICK_MANAGEMENT_SYSFLG 0x04
-#define MEMSTICK_MANAGEMENT_ATFLG  0x08
-#define MEMSTICK_MANAGEMENT_SCMS1  0x10
-#define MEMSTICK_MANAGEMENT_SCMS0  0x20
-
-	unsigned short logical_address;
-} __attribute__((packed));
-
-struct ms_register {
-	struct ms_status_register     status;
-	struct ms_id_register         id;
-	unsigned char                 reserved[8];
-	struct ms_param_register      param;
-	struct ms_extra_data_register extra_data;
-} __attribute__((packed));
-
-struct mspro_param_register {
-	unsigned char  system;
-#define MEMSTICK_SYS_PAR4   0x00
-#define MEMSTICK_SYS_PAR8   0x40
-#define MEMSTICK_SYS_SERIAL 0x80
-
-	__be16 data_count;
-	__be32 data_address;
-	unsigned char  tpc_param;
-} __attribute__((packed));
-
-struct mspro_io_info_register {
-	unsigned char version;
-	unsigned char io_category;
-	unsigned char current_req;
-	unsigned char card_opt_info;
-	unsigned char rdy_wait_time;
-} __attribute__((packed));
-
-struct mspro_io_func_register {
-	unsigned char func_enable;
-	unsigned char func_select;
-	unsigned char func_intmask;
-	unsigned char transfer_mode;
-} __attribute__((packed));
-
-struct mspro_io_cmd_register {
-	unsigned short tpc_param;
-	unsigned short data_count;
-	unsigned int   data_address;
-} __attribute__((packed));
-
-struct mspro_register {
-	struct ms_status_register     status;
-	struct ms_id_register         id;
-	unsigned char                 reserved0[8];
-	struct mspro_param_register   param;
-	unsigned char                 reserved1[8];
-	struct mspro_io_info_register io_info;
-	struct mspro_io_func_register io_func;
-	unsigned char                 reserved2[7];
-	struct mspro_io_cmd_register  io_cmd;
-	unsigned char                 io_int;
-	unsigned char                 io_int_func;
-} __attribute__((packed));
-
-struct ms_register_addr {
-	unsigned char r_offset;
-	unsigned char r_length;
-	unsigned char w_offset;
-	unsigned char w_length;
-} __attribute__((packed));
-
-enum memstick_tpc {
-	MS_TPC_READ_MG_STATUS   = 0x01,
-	MS_TPC_READ_LONG_DATA   = 0x02,
-	MS_TPC_READ_SHORT_DATA  = 0x03,
-	MS_TPC_READ_MG_DATA     = 0x03,
-	MS_TPC_READ_REG         = 0x04,
-	MS_TPC_READ_QUAD_DATA   = 0x05,
-	MS_TPC_READ_IO_DATA     = 0x05,
-	MS_TPC_GET_INT          = 0x07,
-	MS_TPC_SET_RW_REG_ADRS  = 0x08,
-	MS_TPC_EX_SET_CMD       = 0x09,
-	MS_TPC_WRITE_QUAD_DATA  = 0x0a,
-	MS_TPC_WRITE_IO_DATA    = 0x0a,
-	MS_TPC_WRITE_REG        = 0x0b,
-	MS_TPC_WRITE_SHORT_DATA = 0x0c,
-	MS_TPC_WRITE_MG_DATA    = 0x0c,
-	MS_TPC_WRITE_LONG_DATA  = 0x0d,
-	MS_TPC_SET_CMD          = 0x0e
-};
-
-enum memstick_command {
-	MS_CMD_BLOCK_END       = 0x33,
-	MS_CMD_RESET           = 0x3c,
-	MS_CMD_BLOCK_WRITE     = 0x55,
-	MS_CMD_SLEEP           = 0x5a,
-	MS_CMD_BLOCK_ERASE     = 0x99,
-	MS_CMD_BLOCK_READ      = 0xaa,
-	MS_CMD_CLEAR_BUF       = 0xc3,
-	MS_CMD_FLASH_STOP      = 0xcc,
-	MS_CMD_LOAD_ID         = 0x60,
-	MS_CMD_CMP_ICV         = 0x7f,
-	MSPRO_CMD_FORMAT       = 0x10,
-	MSPRO_CMD_SLEEP        = 0x11,
-	MSPRO_CMD_WAKEUP       = 0x12,
-	MSPRO_CMD_READ_DATA    = 0x20,
-	MSPRO_CMD_WRITE_DATA   = 0x21,
-	MSPRO_CMD_READ_ATRB    = 0x24,
-	MSPRO_CMD_STOP         = 0x25,
-	MSPRO_CMD_ERASE        = 0x26,
-	MSPRO_CMD_READ_QUAD    = 0x27,
-	MSPRO_CMD_WRITE_QUAD   = 0x28,
-	MSPRO_CMD_SET_IBD      = 0x46,
-	MSPRO_CMD_GET_IBD      = 0x47,
-	MSPRO_CMD_IN_IO_DATA   = 0xb0,
-	MSPRO_CMD_OUT_IO_DATA  = 0xb1,
-	MSPRO_CMD_READ_IO_ATRB = 0xb2,
-	MSPRO_CMD_IN_IO_FIFO   = 0xb3,
-	MSPRO_CMD_OUT_IO_FIFO  = 0xb4,
-	MSPRO_CMD_IN_IOM       = 0xb5,
-	MSPRO_CMD_OUT_IOM      = 0xb6,
-};
-
-/*** Driver structures and functions ***/
-
-enum memstick_param { MEMSTICK_POWER = 1, MEMSTICK_INTERFACE };
-
-#define MEMSTICK_POWER_OFF 0
-#define MEMSTICK_POWER_ON  1
-
-#define MEMSTICK_SERIAL   0
-#define MEMSTICK_PAR4     1
-#define MEMSTICK_PAR8     2
-
-struct memstick_host;
-struct memstick_driver;
-
-struct memstick_device_id {
-	unsigned char match_flags;
-#define MEMSTICK_MATCH_ALL            0x01
-
-	unsigned char type;
-#define MEMSTICK_TYPE_LEGACY          0xff
-#define MEMSTICK_TYPE_DUO             0x00
-#define MEMSTICK_TYPE_PRO             0x01
-
-	unsigned char category;
-#define MEMSTICK_CATEGORY_STORAGE     0xff
-#define MEMSTICK_CATEGORY_STORAGE_DUO 0x00
-#define MEMSTICK_CATEGORY_IO          0x01
-#define MEMSTICK_CATEGORY_IO_PRO      0x10
-
-	unsigned char class;
-#define MEMSTICK_CLASS_FLASH          0xff
-#define MEMSTICK_CLASS_DUO            0x00
-#define MEMSTICK_CLASS_ROM            0x01
-#define MEMSTICK_CLASS_RO             0x02
-#define MEMSTICK_CLASS_WP             0x03
-};
-
-struct memstick_request {
-	unsigned char tpc;
-	unsigned char data_dir:1,
-		      need_card_int:1,
-		      long_data:1;
-	unsigned char int_reg;
-	int           error;
-	union {
-		struct scatterlist sg;
-		struct {
-			unsigned char data_len;
-			unsigned char data[15];
-		};
-	};
-};
-
-struct memstick_dev {
-	struct memstick_device_id id;
-	struct memstick_host     *host;
-	struct ms_register_addr  reg_addr;
-	struct completion        mrq_complete;
-	struct memstick_request  current_mrq;
-
-	/* Check that media driver is still willing to operate the device. */
-	int                      (*check)(struct memstick_dev *card);
-	/* Get next request from the media driver.                         */
-	int                      (*next_request)(struct memstick_dev *card,
-						 struct memstick_request **mrq);
-	/* Tell the media driver to stop doing things                      */
-	void                     (*stop)(struct memstick_dev *card);
-	/* Allow the media driver to continue                              */
-	void                     (*start)(struct memstick_dev *card);
-
-	struct device            dev;
-};
-
-struct memstick_host {
-	struct mutex        lock;
-	unsigned int        id;
-	unsigned int        caps;
-#define MEMSTICK_CAP_AUTO_GET_INT  1
-#define MEMSTICK_CAP_PAR4          2
-#define MEMSTICK_CAP_PAR8          4
-
-	struct work_struct  media_checker;
-	struct device       dev;
-
-	struct memstick_dev *card;
-	unsigned int        retries;
-
-	/* Notify the host that some requests are pending. */
-	void                (*request)(struct memstick_host *host);
-	/* Set host IO parameters (power, clock, etc).     */
-	int                 (*set_param)(struct memstick_host *host,
-					 enum memstick_param param,
-					 int value);
-	unsigned long       private[0] ____cacheline_aligned;
-};
-
-struct memstick_driver {
-	struct memstick_device_id *id_table;
-	int                       (*probe)(struct memstick_dev *card);
-	void                      (*remove)(struct memstick_dev *card);
-	int                       (*suspend)(struct memstick_dev *card,
-					     pm_message_t state);
-	int                       (*resume)(struct memstick_dev *card);
-
-	struct device_driver      driver;
-};
-
-int memstick_register_driver(struct memstick_driver *drv);
-void memstick_unregister_driver(struct memstick_driver *drv);
-
-struct memstick_host *memstick_alloc_host(unsigned int extra,
-					  struct device *dev);
-
-int memstick_add_host(struct memstick_host *host);
-void memstick_remove_host(struct memstick_host *host);
-void memstick_free_host(struct memstick_host *host);
-void memstick_detect_change(struct memstick_host *host);
-void memstick_suspend_host(struct memstick_host *host);
-void memstick_resume_host(struct memstick_host *host);
-
-void memstick_init_req_sg(struct memstick_request *mrq, unsigned char tpc,
-			  const struct scatterlist *sg);
-void memstick_init_req(struct memstick_request *mrq, unsigned char tpc,
-		       const void *buf, size_t length);
-int memstick_next_req(struct memstick_host *host,
-		      struct memstick_request **mrq);
-void memstick_new_req(struct memstick_host *host);
-
-int memstick_set_rw_addr(struct memstick_dev *card);
-
-static inline void *memstick_priv(struct memstick_host *host)
-{
-	return (void *)host->private;
-}
-
-static inline void *memstick_get_drvdata(struct memstick_dev *card)
-{
-	return dev_get_drvdata(&card->dev);
-}
-
-static inline void memstick_set_drvdata(struct memstick_dev *card, void *data)
-{
-	dev_set_drvdata(&card->dev, data);
-}
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/meye.h b/ANDROID_3.4.5/include/linux/meye.h
deleted file mode 100644
index 0dd49954..00000000
--- a/ANDROID_3.4.5/include/linux/meye.h
+++ /dev/null
@@ -1,66 +0,0 @@
-/*
- * Motion Eye video4linux driver for Sony Vaio PictureBook
- *
- * Copyright (C) 2001-2003 Stelian Pop <stelian@popies.net>
- *
- * Copyright (C) 2001-2002 Alcôve <www.alcove.com>
- *
- * Copyright (C) 2000 Andrew Tridgell <tridge@valinux.com>
- *
- * Earlier work by Werner Almesberger, Paul `Rusty' Russell and Paul Mackerras.
- *
- * Some parts borrowed from various video4linux drivers, especially
- * bttv-driver.c and zoran.c, see original files for credits.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef _MEYE_H_
-#define _MEYE_H_
-
-/****************************************************************************/
-/* Private API for handling mjpeg capture / playback.                       */
-/****************************************************************************/
-
-struct meye_params {
-	unsigned char subsample;
-	unsigned char quality;
-	unsigned char sharpness;
-	unsigned char agc;
-	unsigned char picture;
-	unsigned char framerate;
-};
-
-/* query the extended parameters */
-#define MEYEIOC_G_PARAMS	_IOR ('v', BASE_VIDIOC_PRIVATE+0, struct meye_params)
-/* set the extended parameters */
-#define MEYEIOC_S_PARAMS	_IOW ('v', BASE_VIDIOC_PRIVATE+1, struct meye_params)
-/* queue a buffer for mjpeg capture */
-#define MEYEIOC_QBUF_CAPT	_IOW ('v', BASE_VIDIOC_PRIVATE+2, int)
-/* sync a previously queued mjpeg buffer */
-#define MEYEIOC_SYNC		_IOWR('v', BASE_VIDIOC_PRIVATE+3, int)
-/* get a still uncompressed snapshot */
-#define MEYEIOC_STILLCAPT	_IO  ('v', BASE_VIDIOC_PRIVATE+4)
-/* get a jpeg compressed snapshot */
-#define MEYEIOC_STILLJCAPT	_IOR ('v', BASE_VIDIOC_PRIVATE+5, int)
-
-/* V4L2 private controls */
-#define V4L2_CID_AGC		V4L2_CID_PRIVATE_BASE
-#define V4L2_CID_MEYE_SHARPNESS	(V4L2_CID_PRIVATE_BASE + 1)
-#define V4L2_CID_PICTURE	(V4L2_CID_PRIVATE_BASE + 2)
-#define V4L2_CID_JPEGQUAL	(V4L2_CID_PRIVATE_BASE + 3)
-#define V4L2_CID_FRAMERATE	(V4L2_CID_PRIVATE_BASE + 4)
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/mfd/88pm860x.h b/ANDROID_3.4.5/include/linux/mfd/88pm860x.h
deleted file mode 100644
index 84d071ad..00000000
--- a/ANDROID_3.4.5/include/linux/mfd/88pm860x.h
+++ /dev/null
@@ -1,414 +0,0 @@
-/*
- * Marvell 88PM860x Interface
- *
- * Copyright (C) 2009 Marvell International Ltd.
- * 	Haojian Zhuang <haojian.zhuang@marvell.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __LINUX_MFD_88PM860X_H
-#define __LINUX_MFD_88PM860X_H
-
-#include <linux/interrupt.h>
-
-#define MFD_NAME_SIZE		(40)
-
-enum {
-	CHIP_INVALID = 0,
-	CHIP_PM8606,
-	CHIP_PM8607,
-	CHIP_MAX,
-};
-
-enum {
-	PM8606_ID_INVALID,
-	PM8606_ID_BACKLIGHT,
-	PM8606_ID_LED,
-	PM8606_ID_VIBRATOR,
-	PM8606_ID_TOUCH,
-	PM8606_ID_SOUND,
-	PM8606_ID_CHARGER,
-	PM8606_ID_MAX,
-};
-
-enum {
-	PM8606_BACKLIGHT1 = 0,
-	PM8606_BACKLIGHT2,
-	PM8606_BACKLIGHT3,
-};
-
-enum {
-	PM8606_LED1_RED = 0,
-	PM8606_LED1_GREEN,
-	PM8606_LED1_BLUE,
-	PM8606_LED2_RED,
-	PM8606_LED2_GREEN,
-	PM8606_LED2_BLUE,
-	PM8607_LED_VIBRATOR,
-};
-
-
-/* 8606 Registers */
-#define PM8606_DCM_BOOST		(0x00)
-#define PM8606_PWM			(0x01)
-
-/* Backlight Registers */
-#define PM8606_WLED1A			(0x02)
-#define PM8606_WLED1B			(0x03)
-#define PM8606_WLED2A			(0x04)
-#define PM8606_WLED2B			(0x05)
-#define PM8606_WLED3A			(0x06)
-#define PM8606_WLED3B			(0x07)
-
-/* LED Registers */
-#define PM8606_RGB2A			(0x08)
-#define PM8606_RGB2B			(0x09)
-#define PM8606_RGB2C			(0x0A)
-#define PM8606_RGB2D			(0x0B)
-#define PM8606_RGB1A			(0x0C)
-#define PM8606_RGB1B			(0x0D)
-#define PM8606_RGB1C			(0x0E)
-#define PM8606_RGB1D			(0x0F)
-
-#define PM8606_PREREGULATORA		(0x10)
-#define PM8606_PREREGULATORB		(0x11)
-#define PM8606_VIBRATORA		(0x12)
-#define PM8606_VIBRATORB		(0x13)
-#define PM8606_VCHG			(0x14)
-#define PM8606_VSYS			(0x15)
-#define PM8606_MISC			(0x16)
-#define PM8606_CHIP_ID			(0x17)
-#define PM8606_STATUS			(0x18)
-#define PM8606_FLAGS			(0x19)
-#define PM8606_PROTECTA			(0x1A)
-#define PM8606_PROTECTB			(0x1B)
-#define PM8606_PROTECTC			(0x1C)
-
-/* Bit definitions of PM8606 registers */
-#define PM8606_DCM_500MA		(0x0)	/* current limit */
-#define PM8606_DCM_750MA		(0x1)
-#define PM8606_DCM_1000MA		(0x2)
-#define PM8606_DCM_1250MA		(0x3)
-#define PM8606_DCM_250MV		(0x0 << 2)
-#define PM8606_DCM_300MV		(0x1 << 2)
-#define PM8606_DCM_350MV		(0x2 << 2)
-#define PM8606_DCM_400MV		(0x3 << 2)
-
-#define PM8606_PWM_31200HZ		(0x0)
-#define PM8606_PWM_15600HZ		(0x1)
-#define PM8606_PWM_7800HZ		(0x2)
-#define PM8606_PWM_3900HZ		(0x3)
-#define PM8606_PWM_1950HZ		(0x4)
-#define PM8606_PWM_976HZ		(0x5)
-#define PM8606_PWM_488HZ		(0x6)
-#define PM8606_PWM_244HZ		(0x7)
-#define PM8606_PWM_FREQ_MASK		(0x7)
-
-#define PM8606_WLED_ON			(1 << 0)
-#define PM8606_WLED_CURRENT(x)		((x & 0x1F) << 1)
-
-#define PM8606_LED_CURRENT(x)		(((x >> 2) & 0x07) << 5)
-
-#define PM8606_VSYS_EN			(1 << 1)
-
-#define PM8606_MISC_OSC_EN		(1 << 4)
-
-enum {
-	PM8607_ID_BUCK1 = 0,
-	PM8607_ID_BUCK2,
-	PM8607_ID_BUCK3,
-
-	PM8607_ID_LDO1,
-	PM8607_ID_LDO2,
-	PM8607_ID_LDO3,
-	PM8607_ID_LDO4,
-	PM8607_ID_LDO5,
-	PM8607_ID_LDO6,
-	PM8607_ID_LDO7,
-	PM8607_ID_LDO8,
-	PM8607_ID_LDO9,
-	PM8607_ID_LDO10,
-	PM8607_ID_LDO11,
-	PM8607_ID_LDO12,
-	PM8607_ID_LDO13,
-	PM8607_ID_LDO14,
-	PM8607_ID_LDO15,
-
-	PM8607_ID_RG_MAX,
-};
-
-/* 8607 chip ID is 0x40 or 0x50 */
-#define PM8607_VERSION_MASK		(0xF0)	/* 8607 chip ID mask */
-
-/* Interrupt Registers */
-#define PM8607_STATUS_1			(0x01)
-#define PM8607_STATUS_2			(0x02)
-#define PM8607_INT_STATUS1		(0x03)
-#define PM8607_INT_STATUS2		(0x04)
-#define PM8607_INT_STATUS3		(0x05)
-#define PM8607_INT_MASK_1		(0x06)
-#define PM8607_INT_MASK_2		(0x07)
-#define PM8607_INT_MASK_3		(0x08)
-
-/* Regulator Control Registers */
-#define PM8607_LDO1			(0x10)
-#define PM8607_LDO2			(0x11)
-#define PM8607_LDO3			(0x12)
-#define PM8607_LDO4			(0x13)
-#define PM8607_LDO5			(0x14)
-#define PM8607_LDO6			(0x15)
-#define PM8607_LDO7			(0x16)
-#define PM8607_LDO8			(0x17)
-#define PM8607_LDO9			(0x18)
-#define PM8607_LDO10			(0x19)
-#define PM8607_LDO12			(0x1A)
-#define PM8607_LDO14			(0x1B)
-#define PM8607_SLEEP_MODE1		(0x1C)
-#define PM8607_SLEEP_MODE2		(0x1D)
-#define PM8607_SLEEP_MODE3		(0x1E)
-#define PM8607_SLEEP_MODE4		(0x1F)
-#define PM8607_GO			(0x20)
-#define PM8607_SLEEP_BUCK1		(0x21)
-#define PM8607_SLEEP_BUCK2		(0x22)
-#define PM8607_SLEEP_BUCK3		(0x23)
-#define PM8607_BUCK1			(0x24)
-#define PM8607_BUCK2			(0x25)
-#define PM8607_BUCK3			(0x26)
-#define PM8607_BUCK_CONTROLS		(0x27)
-#define PM8607_SUPPLIES_EN11		(0x2B)
-#define PM8607_SUPPLIES_EN12		(0x2C)
-#define PM8607_GROUP1			(0x2D)
-#define PM8607_GROUP2			(0x2E)
-#define PM8607_GROUP3			(0x2F)
-#define PM8607_GROUP4			(0x30)
-#define PM8607_GROUP5			(0x31)
-#define PM8607_GROUP6			(0x32)
-#define PM8607_SUPPLIES_EN21		(0x33)
-#define PM8607_SUPPLIES_EN22		(0x34)
-
-/* Vibrator Control Registers */
-#define PM8607_VIBRATOR_SET		(0x28)
-#define PM8607_VIBRATOR_PWM		(0x29)
-
-/* GPADC Registers */
-#define PM8607_GP_BIAS1			(0x4F)
-#define PM8607_MEAS_EN1			(0x50)
-#define PM8607_MEAS_EN2			(0x51)
-#define PM8607_MEAS_EN3			(0x52)
-#define PM8607_MEAS_OFF_TIME1		(0x53)
-#define PM8607_MEAS_OFF_TIME2		(0x54)
-#define PM8607_TSI_PREBIAS		(0x55)	/* prebias time */
-#define PM8607_PD_PREBIAS		(0x56)	/* prebias time */
-#define PM8607_GPADC_MISC1		(0x57)
-
-/* RTC Control Registers */
-#define PM8607_RTC1			(0xA0)
-#define PM8607_RTC_COUNTER1		(0xA1)
-#define PM8607_RTC_COUNTER2		(0xA2)
-#define PM8607_RTC_COUNTER3		(0xA3)
-#define PM8607_RTC_COUNTER4		(0xA4)
-#define PM8607_RTC_EXPIRE1		(0xA5)
-#define PM8607_RTC_EXPIRE2		(0xA6)
-#define PM8607_RTC_EXPIRE3		(0xA7)
-#define PM8607_RTC_EXPIRE4		(0xA8)
-#define PM8607_RTC_TRIM1		(0xA9)
-#define PM8607_RTC_TRIM2		(0xAA)
-#define PM8607_RTC_TRIM3		(0xAB)
-#define PM8607_RTC_TRIM4		(0xAC)
-#define PM8607_RTC_MISC1		(0xAD)
-#define PM8607_RTC_MISC2		(0xAE)
-#define PM8607_RTC_MISC3		(0xAF)
-
-/* Misc Registers */
-#define PM8607_CHIP_ID			(0x00)
-#define PM8607_B0_MISC1			(0x0C)
-#define PM8607_LDO1			(0x10)
-#define PM8607_DVC3			(0x26)
-#define PM8607_A1_MISC1			(0x40)
-
-/* bit definitions of Status Query Interface */
-#define PM8607_STATUS_CC		(1 << 3)
-#define PM8607_STATUS_PEN		(1 << 4)
-#define PM8607_STATUS_HEADSET		(1 << 5)
-#define PM8607_STATUS_HOOK		(1 << 6)
-#define PM8607_STATUS_MICIN		(1 << 7)
-#define PM8607_STATUS_ONKEY		(1 << 8)
-#define PM8607_STATUS_EXTON		(1 << 9)
-#define PM8607_STATUS_CHG		(1 << 10)
-#define PM8607_STATUS_BAT		(1 << 11)
-#define PM8607_STATUS_VBUS		(1 << 12)
-#define PM8607_STATUS_OV		(1 << 13)
-
-/* bit definitions of BUCK3 */
-#define PM8607_BUCK3_DOUBLE		(1 << 6)
-
-/* bit definitions of Misc1 */
-#define PM8607_A1_MISC1_PI2C		(1 << 0)
-#define PM8607_B0_MISC1_INV_INT		(1 << 0)
-#define PM8607_B0_MISC1_INT_CLEAR	(1 << 1)
-#define PM8607_B0_MISC1_INT_MASK	(1 << 2)
-#define PM8607_B0_MISC1_PI2C		(1 << 3)
-#define PM8607_B0_MISC1_RESET		(1 << 6)
-
-/* bits definitions of GPADC */
-#define PM8607_GPADC_EN			(1 << 0)
-#define PM8607_GPADC_PREBIAS_MASK	(3 << 1)
-#define PM8607_GPADC_SLOT_CYCLE_MASK	(3 << 3)	/* slow mode */
-#define PM8607_GPADC_OFF_SCALE_MASK	(3 << 5)	/* GP sleep mode */
-#define PM8607_GPADC_SW_CAL_MASK	(1 << 7)
-
-#define PM8607_PD_PREBIAS_MASK		(0x1F << 0)
-#define PM8607_PD_PRECHG_MASK		(7 << 5)
-
-#define PM8606_REF_GP_OSC_OFF         0
-#define PM8606_REF_GP_OSC_ON          1
-#define PM8606_REF_GP_OSC_UNKNOWN     2
-
-/* Clients of reference group and 8MHz oscillator in 88PM8606 */
-enum pm8606_ref_gp_and_osc_clients {
-	REF_GP_NO_CLIENTS       = 0,
-	WLED1_DUTY              = (1<<0), /*PF 0x02.7:0*/
-	WLED2_DUTY              = (1<<1), /*PF 0x04.7:0*/
-	WLED3_DUTY              = (1<<2), /*PF 0x06.7:0*/
-	RGB1_ENABLE             = (1<<3), /*PF 0x07.1*/
-	RGB2_ENABLE             = (1<<4), /*PF 0x07.2*/
-	LDO_VBR_EN              = (1<<5), /*PF 0x12.0*/
-	REF_GP_MAX_CLIENT       = 0xFFFF
-};
-
-/* Interrupt Number in 88PM8607 */
-enum {
-	PM8607_IRQ_ONKEY,
-	PM8607_IRQ_EXTON,
-	PM8607_IRQ_CHG,
-	PM8607_IRQ_BAT,
-	PM8607_IRQ_RTC,
-	PM8607_IRQ_CC,
-	PM8607_IRQ_VBAT,
-	PM8607_IRQ_VCHG,
-	PM8607_IRQ_VSYS,
-	PM8607_IRQ_TINT,
-	PM8607_IRQ_GPADC0,
-	PM8607_IRQ_GPADC1,
-	PM8607_IRQ_GPADC2,
-	PM8607_IRQ_GPADC3,
-	PM8607_IRQ_AUDIO_SHORT,
-	PM8607_IRQ_PEN,
-	PM8607_IRQ_HEADSET,
-	PM8607_IRQ_HOOK,
-	PM8607_IRQ_MICIN,
-	PM8607_IRQ_CHG_FAIL,
-	PM8607_IRQ_CHG_DONE,
-	PM8607_IRQ_CHG_FAULT,
-};
-
-enum {
-	PM8607_CHIP_A0 = 0x40,
-	PM8607_CHIP_A1 = 0x41,
-	PM8607_CHIP_B0 = 0x48,
-};
-
-struct pm860x_chip {
-	struct device		*dev;
-	struct mutex		irq_lock;
-	struct mutex		osc_lock;
-	struct i2c_client	*client;
-	struct i2c_client	*companion;	/* companion chip client */
-	struct regmap           *regmap;
-	struct regmap           *regmap_companion;
-
-	int			buck3_double;	/* DVC ramp slope double */
-	unsigned short		companion_addr;
-	unsigned short		osc_vote;
-	int			id;
-	int			irq_mode;
-	int			irq_base;
-	int			core_irq;
-	unsigned char		chip_version;
-	unsigned char		osc_status;
-
-	unsigned int            wakeup_flag;
-};
-
-enum {
-	GI2C_PORT = 0,
-	PI2C_PORT,
-};
-
-struct pm860x_backlight_pdata {
-	int		id;
-	int		pwm;
-	int		iset;
-	unsigned long	flags;
-};
-
-struct pm860x_led_pdata {
-	int		id;
-	int		iset;
-	unsigned long	flags;
-};
-
-struct pm860x_rtc_pdata {
-	int		(*sync)(unsigned int ticks);
-	int		vrtc;
-};
-
-struct pm860x_touch_pdata {
-	int		gpadc_prebias;
-	int		slot_cycle;
-	int		off_scale;
-	int		sw_cal;
-	int		tsi_prebias;	/* time, slot */
-	int		pen_prebias;	/* time, slot */
-	int		pen_prechg;	/* time, slot */
-	int		res_x;		/* resistor of Xplate */
-	unsigned long	flags;
-};
-
-struct pm860x_power_pdata {
-	unsigned	fast_charge;	/* charge current */
-};
-
-struct pm860x_platform_data {
-	struct pm860x_backlight_pdata	*backlight;
-	struct pm860x_led_pdata		*led;
-	struct pm860x_rtc_pdata		*rtc;
-	struct pm860x_touch_pdata	*touch;
-	struct pm860x_power_pdata	*power;
-	struct regulator_init_data	*regulator;
-
-	unsigned short	companion_addr;	/* I2C address of companion chip */
-	int		i2c_port;	/* Controlled by GI2C or PI2C */
-	int		irq_mode;	/* Clear interrupt by read/write(0/1) */
-	int		irq_base;	/* IRQ base number of 88pm860x */
-	int		num_leds;
-	int		num_backlights;
-	int		num_regulators;
-};
-
-extern int pm8606_osc_enable(struct pm860x_chip *, unsigned short);
-extern int pm8606_osc_disable(struct pm860x_chip *, unsigned short);
-
-extern int pm860x_reg_read(struct i2c_client *, int);
-extern int pm860x_reg_write(struct i2c_client *, int, unsigned char);
-extern int pm860x_bulk_read(struct i2c_client *, int, int, unsigned char *);
-extern int pm860x_bulk_write(struct i2c_client *, int, int, unsigned char *);
-extern int pm860x_set_bits(struct i2c_client *, int, unsigned char,
-			   unsigned char);
-extern int pm860x_page_reg_read(struct i2c_client *, int);
-extern int pm860x_page_reg_write(struct i2c_client *, int, unsigned char);
-extern int pm860x_page_bulk_read(struct i2c_client *, int, int,
-				 unsigned char *);
-extern int pm860x_page_bulk_write(struct i2c_client *, int, int,
-				  unsigned char *);
-extern int pm860x_page_set_bits(struct i2c_client *, int, unsigned char,
-				unsigned char);
-
-extern int pm860x_device_init(struct pm860x_chip *chip,
-			      struct pm860x_platform_data *pdata) __devinit ;
-extern void pm860x_device_exit(struct pm860x_chip *chip) __devexit ;
-
-#endif /* __LINUX_MFD_88PM860X_H */
diff --git a/ANDROID_3.4.5/include/linux/mfd/aat2870.h b/ANDROID_3.4.5/include/linux/mfd/aat2870.h
deleted file mode 100644
index f7316c29..00000000
--- a/ANDROID_3.4.5/include/linux/mfd/aat2870.h
+++ /dev/null
@@ -1,181 +0,0 @@
-/*
- * linux/include/linux/mfd/aat2870.h
- *
- * Copyright (c) 2011, NVIDIA Corporation.
- * Author: Jin Park <jinyoungp@nvidia.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- */
-
-#ifndef __LINUX_MFD_AAT2870_H
-#define __LINUX_MFD_AAT2870_H
-
-#include <linux/debugfs.h>
-#include <linux/i2c.h>
-
-/* Register offsets */
-#define AAT2870_BL_CH_EN	0x00
-#define AAT2870_BLM		0x01
-#define AAT2870_BLS		0x02
-#define AAT2870_BL1		0x03
-#define AAT2870_BL2		0x04
-#define AAT2870_BL3		0x05
-#define AAT2870_BL4		0x06
-#define AAT2870_BL5		0x07
-#define AAT2870_BL6		0x08
-#define AAT2870_BL7		0x09
-#define AAT2870_BL8		0x0A
-#define AAT2870_FLR		0x0B
-#define AAT2870_FM		0x0C
-#define AAT2870_FS		0x0D
-#define AAT2870_ALS_CFG0	0x0E
-#define AAT2870_ALS_CFG1	0x0F
-#define AAT2870_ALS_CFG2	0x10
-#define AAT2870_AMB		0x11
-#define AAT2870_ALS0		0x12
-#define AAT2870_ALS1		0x13
-#define AAT2870_ALS2		0x14
-#define AAT2870_ALS3		0x15
-#define AAT2870_ALS4		0x16
-#define AAT2870_ALS5		0x17
-#define AAT2870_ALS6		0x18
-#define AAT2870_ALS7		0x19
-#define AAT2870_ALS8		0x1A
-#define AAT2870_ALS9		0x1B
-#define AAT2870_ALSA		0x1C
-#define AAT2870_ALSB		0x1D
-#define AAT2870_ALSC		0x1E
-#define AAT2870_ALSD		0x1F
-#define AAT2870_ALSE		0x20
-#define AAT2870_ALSF		0x21
-#define AAT2870_SUB_SET		0x22
-#define AAT2870_SUB_CTRL	0x23
-#define AAT2870_LDO_AB		0x24
-#define AAT2870_LDO_CD		0x25
-#define AAT2870_LDO_EN		0x26
-#define AAT2870_REG_NUM		0x27
-
-/* Device IDs */
-enum aat2870_id {
-	AAT2870_ID_BL,
-	AAT2870_ID_LDOA,
-	AAT2870_ID_LDOB,
-	AAT2870_ID_LDOC,
-	AAT2870_ID_LDOD
-};
-
-/* Backlight channels */
-#define AAT2870_BL_CH1		0x01
-#define AAT2870_BL_CH2		0x02
-#define AAT2870_BL_CH3		0x04
-#define AAT2870_BL_CH4		0x08
-#define AAT2870_BL_CH5		0x10
-#define AAT2870_BL_CH6		0x20
-#define AAT2870_BL_CH7		0x40
-#define AAT2870_BL_CH8		0x80
-#define AAT2870_BL_CH_ALL	0xFF
-
-/* Backlight current magnitude (mA) */
-enum aat2870_current {
-	AAT2870_CURRENT_0_45 = 1,
-	AAT2870_CURRENT_0_90,
-	AAT2870_CURRENT_1_80,
-	AAT2870_CURRENT_2_70,
-	AAT2870_CURRENT_3_60,
-	AAT2870_CURRENT_4_50,
-	AAT2870_CURRENT_5_40,
-	AAT2870_CURRENT_6_30,
-	AAT2870_CURRENT_7_20,
-	AAT2870_CURRENT_8_10,
-	AAT2870_CURRENT_9_00,
-	AAT2870_CURRENT_9_90,
-	AAT2870_CURRENT_10_8,
-	AAT2870_CURRENT_11_7,
-	AAT2870_CURRENT_12_6,
-	AAT2870_CURRENT_13_5,
-	AAT2870_CURRENT_14_4,
-	AAT2870_CURRENT_15_3,
-	AAT2870_CURRENT_16_2,
-	AAT2870_CURRENT_17_1,
-	AAT2870_CURRENT_18_0,
-	AAT2870_CURRENT_18_9,
-	AAT2870_CURRENT_19_8,
-	AAT2870_CURRENT_20_7,
-	AAT2870_CURRENT_21_6,
-	AAT2870_CURRENT_22_5,
-	AAT2870_CURRENT_23_4,
-	AAT2870_CURRENT_24_3,
-	AAT2870_CURRENT_25_2,
-	AAT2870_CURRENT_26_1,
-	AAT2870_CURRENT_27_0,
-	AAT2870_CURRENT_27_9
-};
-
-struct aat2870_register {
-	bool readable;
-	bool writeable;
-	u8 value;
-};
-
-struct aat2870_data {
-	struct device *dev;
-	struct i2c_client *client;
-
-	struct mutex io_lock;
-	struct aat2870_register *reg_cache; /* register cache */
-	int en_pin; /* enable GPIO pin (if < 0, ignore this value) */
-	bool is_enable;
-
-	/* init and uninit for platform specified */
-	int (*init)(struct aat2870_data *aat2870);
-	void (*uninit)(struct aat2870_data *aat2870);
-
-	/* i2c io funcntions */
-	int (*read)(struct aat2870_data *aat2870, u8 addr, u8 *val);
-	int (*write)(struct aat2870_data *aat2870, u8 addr, u8 val);
-	int (*update)(struct aat2870_data *aat2870, u8 addr, u8 mask, u8 val);
-
-	/* for debugfs */
-	struct dentry *dentry_root;
-	struct dentry *dentry_reg;
-};
-
-struct aat2870_subdev_info {
-	int id;
-	const char *name;
-	void *platform_data;
-};
-
-struct aat2870_platform_data {
-	int en_pin; /* enable GPIO pin (if < 0, ignore this value) */
-
-	struct aat2870_subdev_info *subdevs;
-	int num_subdevs;
-
-	/* init and uninit for platform specified */
-	int (*init)(struct aat2870_data *aat2870);
-	void (*uninit)(struct aat2870_data *aat2870);
-};
-
-struct aat2870_bl_platform_data {
-	/* backlight channels, default is AAT2870_BL_CH_ALL */
-	int channels;
-	/* backlight current magnitude, default is AAT2870_CURRENT_27_9 */
-	int max_current;
-	/* maximum brightness, default is 255 */
-	int max_brightness;
-};
-
-#endif /* __LINUX_MFD_AAT2870_H */
diff --git a/ANDROID_3.4.5/include/linux/mfd/abx500.h b/ANDROID_3.4.5/include/linux/mfd/abx500.h
deleted file mode 100644
index ee96cd51..00000000
--- a/ANDROID_3.4.5/include/linux/mfd/abx500.h
+++ /dev/null
@@ -1,461 +0,0 @@
-/*
- * Copyright (C) 2007-2009 ST-Ericsson AB
- * License terms: GNU General Public License (GPL) version 2
- * AB3100 core access functions
- * Author: Linus Walleij <linus.walleij@stericsson.com>
- *
- * ABX500 core access functions.
- * The abx500 interface is used for the Analog Baseband chip
- * ab3100, ab5500, and ab8500.
- *
- * Author: Mattias Wallin <mattias.wallin@stericsson.com>
- * Author: Mattias Nilsson <mattias.i.nilsson@stericsson.com>
- * Author: Bengt Jonsson <bengt.g.jonsson@stericsson.com>
- * Author: Rickard Andersson <rickard.andersson@stericsson.com>
- */
-
-#include <linux/regulator/machine.h>
-
-struct device;
-
-#ifndef MFD_ABX500_H
-#define MFD_ABX500_H
-
-#define AB3100_P1A	0xc0
-#define AB3100_P1B	0xc1
-#define AB3100_P1C	0xc2
-#define AB3100_P1D	0xc3
-#define AB3100_P1E	0xc4
-#define AB3100_P1F	0xc5
-#define AB3100_P1G	0xc6
-#define AB3100_R2A	0xc7
-#define AB3100_R2B	0xc8
-#define AB5500_1_0	0x20
-#define AB5500_1_1	0x21
-#define AB5500_2_0	0x24
-
-/*
- * AB3100, EVENTA1, A2 and A3 event register flags
- * these are catenated into a single 32-bit flag in the code
- * for event notification broadcasts.
- */
-#define AB3100_EVENTA1_ONSWA				(0x01<<16)
-#define AB3100_EVENTA1_ONSWB				(0x02<<16)
-#define AB3100_EVENTA1_ONSWC				(0x04<<16)
-#define AB3100_EVENTA1_DCIO				(0x08<<16)
-#define AB3100_EVENTA1_OVER_TEMP			(0x10<<16)
-#define AB3100_EVENTA1_SIM_OFF				(0x20<<16)
-#define AB3100_EVENTA1_VBUS				(0x40<<16)
-#define AB3100_EVENTA1_VSET_USB				(0x80<<16)
-
-#define AB3100_EVENTA2_READY_TX				(0x01<<8)
-#define AB3100_EVENTA2_READY_RX				(0x02<<8)
-#define AB3100_EVENTA2_OVERRUN_ERROR			(0x04<<8)
-#define AB3100_EVENTA2_FRAMING_ERROR			(0x08<<8)
-#define AB3100_EVENTA2_CHARG_OVERCURRENT		(0x10<<8)
-#define AB3100_EVENTA2_MIDR				(0x20<<8)
-#define AB3100_EVENTA2_BATTERY_REM			(0x40<<8)
-#define AB3100_EVENTA2_ALARM				(0x80<<8)
-
-#define AB3100_EVENTA3_ADC_TRIG5			(0x01)
-#define AB3100_EVENTA3_ADC_TRIG4			(0x02)
-#define AB3100_EVENTA3_ADC_TRIG3			(0x04)
-#define AB3100_EVENTA3_ADC_TRIG2			(0x08)
-#define AB3100_EVENTA3_ADC_TRIGVBAT			(0x10)
-#define AB3100_EVENTA3_ADC_TRIGVTX			(0x20)
-#define AB3100_EVENTA3_ADC_TRIG1			(0x40)
-#define AB3100_EVENTA3_ADC_TRIG0			(0x80)
-
-/* AB3100, STR register flags */
-#define AB3100_STR_ONSWA				(0x01)
-#define AB3100_STR_ONSWB				(0x02)
-#define AB3100_STR_ONSWC				(0x04)
-#define AB3100_STR_DCIO					(0x08)
-#define AB3100_STR_BOOT_MODE				(0x10)
-#define AB3100_STR_SIM_OFF				(0x20)
-#define AB3100_STR_BATT_REMOVAL				(0x40)
-#define AB3100_STR_VBUS					(0x80)
-
-/*
- * AB3100 contains 8 regulators, one external regulator controller
- * and a buck converter, further the LDO E and buck converter can
- * have separate settings if they are in sleep mode, this is
- * modeled as a separate regulator.
- */
-#define AB3100_NUM_REGULATORS				10
-
-/**
- * struct ab3100
- * @access_mutex: lock out concurrent accesses to the AB3100 registers
- * @dev: pointer to the containing device
- * @i2c_client: I2C client for this chip
- * @testreg_client: secondary client for test registers
- * @chip_name: name of this chip variant
- * @chip_id: 8 bit chip ID for this chip variant
- * @event_subscribers: event subscribers are listed here
- * @startup_events: a copy of the first reading of the event registers
- * @startup_events_read: whether the first events have been read
- *
- * This struct is PRIVATE and devices using it should NOT
- * access ANY fields. It is used as a token for calling the
- * AB3100 functions.
- */
-struct ab3100 {
-	struct mutex access_mutex;
-	struct device *dev;
-	struct i2c_client *i2c_client;
-	struct i2c_client *testreg_client;
-	char chip_name[32];
-	u8 chip_id;
-	struct blocking_notifier_head event_subscribers;
-	u8 startup_events[3];
-	bool startup_events_read;
-};
-
-/**
- * struct ab3100_platform_data
- * Data supplied to initialize board connections to the AB3100
- * @reg_constraints: regulator constraints for target board
- *     the order of these constraints are: LDO A, C, D, E,
- *     F, G, H, K, EXT and BUCK.
- * @reg_initvals: initial values for the regulator registers
- *     plus two sleep settings for LDO E and the BUCK converter.
- *     exactly AB3100_NUM_REGULATORS+2 values must be sent in.
- *     Order: LDO A, C, E, E sleep, F, G, H, K, EXT, BUCK,
- *     BUCK sleep, LDO D. (LDO D need to be initialized last.)
- * @external_voltage: voltage level of the external regulator.
- */
-struct ab3100_platform_data {
-	struct regulator_init_data reg_constraints[AB3100_NUM_REGULATORS];
-	u8 reg_initvals[AB3100_NUM_REGULATORS+2];
-	int external_voltage;
-};
-
-int ab3100_event_register(struct ab3100 *ab3100,
-			  struct notifier_block *nb);
-int ab3100_event_unregister(struct ab3100 *ab3100,
-			    struct notifier_block *nb);
-
-/**
- * struct abx500_init_setting
- * Initial value of the registers for driver to use during setup.
- */
-struct abx500_init_settings {
-	u8 bank;
-	u8 reg;
-	u8 setting;
-};
-
-/* Battery driver related data */
-/*
- * ADC for the battery thermistor.
- * When using the ABx500_ADC_THERM_BATCTRL the battery ID resistor is combined
- * with a NTC resistor to both identify the battery and to measure its
- * temperature. Different phone manufactures uses different techniques to both
- * identify the battery and to read its temperature.
- */
-enum abx500_adc_therm {
-	ABx500_ADC_THERM_BATCTRL,
-	ABx500_ADC_THERM_BATTEMP,
-};
-
-/**
- * struct abx500_res_to_temp - defines one point in a temp to res curve. To
- * be used in battery packs that combines the identification resistor with a
- * NTC resistor.
- * @temp:			battery pack temperature in Celcius
- * @resist:			NTC resistor net total resistance
- */
-struct abx500_res_to_temp {
-	int temp;
-	int resist;
-};
-
-/**
- * struct abx500_v_to_cap - Table for translating voltage to capacity
- * @voltage:		Voltage in mV
- * @capacity:		Capacity in percent
- */
-struct abx500_v_to_cap {
-	int voltage;
-	int capacity;
-};
-
-/* Forward declaration */
-struct abx500_fg;
-
-/**
- * struct abx500_fg_parameters - Fuel gauge algorithm parameters, in seconds
- * if not specified
- * @recovery_sleep_timer:	Time between measurements while recovering
- * @recovery_total_time:	Total recovery time
- * @init_timer:			Measurement interval during startup
- * @init_discard_time:		Time we discard voltage measurement at startup
- * @init_total_time:		Total init time during startup
- * @high_curr_time:		Time current has to be high to go to recovery
- * @accu_charging:		FG accumulation time while charging
- * @accu_high_curr:		FG accumulation time in high current mode
- * @high_curr_threshold:	High current threshold, in mA
- * @lowbat_threshold:		Low battery threshold, in mV
- * @overbat_threshold:		Over battery threshold, in mV
- * @battok_falling_th_sel0	Threshold in mV for battOk signal sel0
- *				Resolution in 50 mV step.
- * @battok_raising_th_sel1	Threshold in mV for battOk signal sel1
- *				Resolution in 50 mV step.
- * @user_cap_limit		Capacity reported from user must be within this
- *				limit to be considered as sane, in percentage
- *				points.
- * @maint_thres			This is the threshold where we stop reporting
- *				battery full while in maintenance, in per cent
- */
-struct abx500_fg_parameters {
-	int recovery_sleep_timer;
-	int recovery_total_time;
-	int init_timer;
-	int init_discard_time;
-	int init_total_time;
-	int high_curr_time;
-	int accu_charging;
-	int accu_high_curr;
-	int high_curr_threshold;
-	int lowbat_threshold;
-	int overbat_threshold;
-	int battok_falling_th_sel0;
-	int battok_raising_th_sel1;
-	int user_cap_limit;
-	int maint_thres;
-};
-
-/**
- * struct abx500_charger_maximization - struct used by the board config.
- * @use_maxi:		Enable maximization for this battery type
- * @maxi_chg_curr:	Maximum charger current allowed
- * @maxi_wait_cycles:	cycles to wait before setting charger current
- * @charger_curr_step	delta between two charger current settings (mA)
- */
-struct abx500_maxim_parameters {
-	bool ena_maxi;
-	int chg_curr;
-	int wait_cycles;
-	int charger_curr_step;
-};
-
-/**
- * struct abx500_battery_type - different batteries supported
- * @name:			battery technology
- * @resis_high:			battery upper resistance limit
- * @resis_low:			battery lower resistance limit
- * @charge_full_design:		Maximum battery capacity in mAh
- * @nominal_voltage:		Nominal voltage of the battery in mV
- * @termination_vol:		max voltage upto which battery can be charged
- * @termination_curr		battery charging termination current in mA
- * @recharge_vol		battery voltage limit that will trigger a new
- *				full charging cycle in the case where maintenan-
- *				-ce charging has been disabled
- * @normal_cur_lvl:		charger current in normal state in mA
- * @normal_vol_lvl:		charger voltage in normal state in mV
- * @maint_a_cur_lvl:		charger current in maintenance A state in mA
- * @maint_a_vol_lvl:		charger voltage in maintenance A state in mV
- * @maint_a_chg_timer_h:	charge time in maintenance A state
- * @maint_b_cur_lvl:		charger current in maintenance B state in mA
- * @maint_b_vol_lvl:		charger voltage in maintenance B state in mV
- * @maint_b_chg_timer_h:	charge time in maintenance B state
- * @low_high_cur_lvl:		charger current in temp low/high state in mA
- * @low_high_vol_lvl:		charger voltage in temp low/high state in mV'
- * @battery_resistance:		battery inner resistance in mOhm.
- * @n_r_t_tbl_elements:		number of elements in r_to_t_tbl
- * @r_to_t_tbl:			table containing resistance to temp points
- * @n_v_cap_tbl_elements:	number of elements in v_to_cap_tbl
- * @v_to_cap_tbl:		Voltage to capacity (in %) table
- * @n_batres_tbl_elements	number of elements in the batres_tbl
- * @batres_tbl			battery internal resistance vs temperature table
- */
-struct abx500_battery_type {
-	int name;
-	int resis_high;
-	int resis_low;
-	int charge_full_design;
-	int nominal_voltage;
-	int termination_vol;
-	int termination_curr;
-	int recharge_vol;
-	int normal_cur_lvl;
-	int normal_vol_lvl;
-	int maint_a_cur_lvl;
-	int maint_a_vol_lvl;
-	int maint_a_chg_timer_h;
-	int maint_b_cur_lvl;
-	int maint_b_vol_lvl;
-	int maint_b_chg_timer_h;
-	int low_high_cur_lvl;
-	int low_high_vol_lvl;
-	int battery_resistance;
-	int n_temp_tbl_elements;
-	struct abx500_res_to_temp *r_to_t_tbl;
-	int n_v_cap_tbl_elements;
-	struct abx500_v_to_cap *v_to_cap_tbl;
-	int n_batres_tbl_elements;
-	struct batres_vs_temp *batres_tbl;
-};
-
-/**
- * struct abx500_bm_capacity_levels - abx500 capacity level data
- * @critical:		critical capacity level in percent
- * @low:		low capacity level in percent
- * @normal:		normal capacity level in percent
- * @high:		high capacity level in percent
- * @full:		full capacity level in percent
- */
-struct abx500_bm_capacity_levels {
-	int critical;
-	int low;
-	int normal;
-	int high;
-	int full;
-};
-
-/**
- * struct abx500_bm_charger_parameters - Charger specific parameters
- * @usb_volt_max:	maximum allowed USB charger voltage in mV
- * @usb_curr_max:	maximum allowed USB charger current in mA
- * @ac_volt_max:	maximum allowed AC charger voltage in mV
- * @ac_curr_max:	maximum allowed AC charger current in mA
- */
-struct abx500_bm_charger_parameters {
-	int usb_volt_max;
-	int usb_curr_max;
-	int ac_volt_max;
-	int ac_curr_max;
-};
-
-/**
- * struct abx500_bm_data - abx500 battery management data
- * @temp_under		under this temp, charging is stopped
- * @temp_low		between this temp and temp_under charging is reduced
- * @temp_high		between this temp and temp_over charging is reduced
- * @temp_over		over this temp, charging is stopped
- * @temp_now		present battery temperature
- * @temp_interval_chg	temperature measurement interval in s when charging
- * @temp_interval_nochg	temperature measurement interval in s when not charging
- * @main_safety_tmr_h	safety timer for main charger
- * @usb_safety_tmr_h	safety timer for usb charger
- * @bkup_bat_v		voltage which we charge the backup battery with
- * @bkup_bat_i		current which we charge the backup battery with
- * @no_maintenance	indicates that maintenance charging is disabled
- * @abx500_adc_therm	placement of thermistor, batctrl or battemp adc
- * @chg_unknown_bat	flag to enable charging of unknown batteries
- * @enable_overshoot	flag to enable VBAT overshoot control
- * @auto_trig		flag to enable auto adc trigger
- * @fg_res		resistance of FG resistor in 0.1mOhm
- * @n_btypes		number of elements in array bat_type
- * @batt_id		index of the identified battery in array bat_type
- * @interval_charging	charge alg cycle period time when charging (sec)
- * @interval_not_charging charge alg cycle period time when not charging (sec)
- * @temp_hysteresis	temperature hysteresis
- * @gnd_lift_resistance	Battery ground to phone ground resistance (mOhm)
- * @maxi:		maximization parameters
- * @cap_levels		capacity in percent for the different capacity levels
- * @bat_type		table of supported battery types
- * @chg_params		charger parameters
- * @fg_params		fuel gauge parameters
- */
-struct abx500_bm_data {
-	int temp_under;
-	int temp_low;
-	int temp_high;
-	int temp_over;
-	int temp_now;
-	int temp_interval_chg;
-	int temp_interval_nochg;
-	int main_safety_tmr_h;
-	int usb_safety_tmr_h;
-	int bkup_bat_v;
-	int bkup_bat_i;
-	bool no_maintenance;
-	bool chg_unknown_bat;
-	bool enable_overshoot;
-	bool auto_trig;
-	enum abx500_adc_therm adc_therm;
-	int fg_res;
-	int n_btypes;
-	int batt_id;
-	int interval_charging;
-	int interval_not_charging;
-	int temp_hysteresis;
-	int gnd_lift_resistance;
-	const struct abx500_maxim_parameters *maxi;
-	const struct abx500_bm_capacity_levels *cap_levels;
-	const struct abx500_battery_type *bat_type;
-	const struct abx500_bm_charger_parameters *chg_params;
-	const struct abx500_fg_parameters *fg_params;
-};
-
-struct abx500_chargalg_platform_data {
-	char **supplied_to;
-	size_t num_supplicants;
-};
-
-struct abx500_charger_platform_data {
-	char **supplied_to;
-	size_t num_supplicants;
-	bool autopower_cfg;
-};
-
-struct abx500_btemp_platform_data {
-	char **supplied_to;
-	size_t num_supplicants;
-};
-
-struct abx500_fg_platform_data {
-	char **supplied_to;
-	size_t num_supplicants;
-};
-
-struct abx500_bm_plat_data {
-	struct abx500_bm_data *battery;
-	struct abx500_charger_platform_data *charger;
-	struct abx500_btemp_platform_data *btemp;
-	struct abx500_fg_platform_data *fg;
-	struct abx500_chargalg_platform_data *chargalg;
-};
-
-int abx500_set_register_interruptible(struct device *dev, u8 bank, u8 reg,
-	u8 value);
-int abx500_get_register_interruptible(struct device *dev, u8 bank, u8 reg,
-	u8 *value);
-int abx500_get_register_page_interruptible(struct device *dev, u8 bank,
-	u8 first_reg, u8 *regvals, u8 numregs);
-int abx500_set_register_page_interruptible(struct device *dev, u8 bank,
-	u8 first_reg, u8 *regvals, u8 numregs);
-/**
- * abx500_mask_and_set_register_inerruptible() - Modifies selected bits of a
- *	target register
- *
- * @dev: The AB sub device.
- * @bank: The i2c bank number.
- * @bitmask: The bit mask to use.
- * @bitvalues: The new bit values.
- *
- * Updates the value of an AB register:
- * value -> ((value & ~bitmask) | (bitvalues & bitmask))
- */
-int abx500_mask_and_set_register_interruptible(struct device *dev, u8 bank,
-	u8 reg, u8 bitmask, u8 bitvalues);
-int abx500_get_chip_id(struct device *dev);
-int abx500_event_registers_startup_state_get(struct device *dev, u8 *event);
-int abx500_startup_irq_enabled(struct device *dev, unsigned int irq);
-
-struct abx500_ops {
-	int (*get_chip_id) (struct device *);
-	int (*get_register) (struct device *, u8, u8, u8 *);
-	int (*set_register) (struct device *, u8, u8, u8);
-	int (*get_register_page) (struct device *, u8, u8, u8 *, u8);
-	int (*set_register_page) (struct device *, u8, u8, u8 *, u8);
-	int (*mask_and_set_register) (struct device *, u8, u8, u8, u8);
-	int (*event_registers_startup_state_get) (struct device *, u8 *);
-	int (*startup_irq_enabled) (struct device *, unsigned int);
-};
-
-int abx500_register_ops(struct device *core_dev, struct abx500_ops *ops);
-void abx500_remove_ops(struct device *dev);
-#endif
diff --git a/ANDROID_3.4.5/include/linux/mfd/abx500/ab5500.h b/ANDROID_3.4.5/include/linux/mfd/abx500/ab5500.h
deleted file mode 100644
index 54f820ed..00000000
--- a/ANDROID_3.4.5/include/linux/mfd/abx500/ab5500.h
+++ /dev/null
@@ -1,140 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson 2011
- *
- * License Terms: GNU General Public License v2
- */
-#ifndef MFD_AB5500_H
-#define MFD_AB5500_H
-
-struct device;
-
-enum ab5500_devid {
-	AB5500_DEVID_ADC,
-	AB5500_DEVID_LEDS,
-	AB5500_DEVID_POWER,
-	AB5500_DEVID_REGULATORS,
-	AB5500_DEVID_SIM,
-	AB5500_DEVID_RTC,
-	AB5500_DEVID_CHARGER,
-	AB5500_DEVID_FUELGAUGE,
-	AB5500_DEVID_VIBRATOR,
-	AB5500_DEVID_CODEC,
-	AB5500_DEVID_USB,
-	AB5500_DEVID_OTP,
-	AB5500_DEVID_VIDEO,
-	AB5500_DEVID_DBIECI,
-	AB5500_DEVID_ONSWA,
-	AB5500_NUM_DEVICES,
-};
-
-enum ab5500_banks {
-	AB5500_BANK_VIT_IO_I2C_CLK_TST_OTP = 0,
-	AB5500_BANK_VDDDIG_IO_I2C_CLK_TST = 1,
-	AB5500_BANK_VDENC = 2,
-	AB5500_BANK_SIM_USBSIM  = 3,
-	AB5500_BANK_LED = 4,
-	AB5500_BANK_ADC  = 5,
-	AB5500_BANK_RTC  = 6,
-	AB5500_BANK_STARTUP  = 7,
-	AB5500_BANK_DBI_ECI  = 8,
-	AB5500_BANK_CHG  = 9,
-	AB5500_BANK_FG_BATTCOM_ACC = 10,
-	AB5500_BANK_USB = 11,
-	AB5500_BANK_IT = 12,
-	AB5500_BANK_VIBRA = 13,
-	AB5500_BANK_AUDIO_HEADSETUSB = 14,
-	AB5500_NUM_BANKS = 15,
-};
-
-enum ab5500_banks_addr {
-	AB5500_ADDR_VIT_IO_I2C_CLK_TST_OTP = 0x4A,
-	AB5500_ADDR_VDDDIG_IO_I2C_CLK_TST = 0x4B,
-	AB5500_ADDR_VDENC = 0x06,
-	AB5500_ADDR_SIM_USBSIM  = 0x04,
-	AB5500_ADDR_LED = 0x10,
-	AB5500_ADDR_ADC  = 0x0A,
-	AB5500_ADDR_RTC  = 0x0F,
-	AB5500_ADDR_STARTUP  = 0x03,
-	AB5500_ADDR_DBI_ECI  = 0x07,
-	AB5500_ADDR_CHG  = 0x0B,
-	AB5500_ADDR_FG_BATTCOM_ACC = 0x0C,
-	AB5500_ADDR_USB = 0x05,
-	AB5500_ADDR_IT = 0x0E,
-	AB5500_ADDR_VIBRA = 0x02,
-	AB5500_ADDR_AUDIO_HEADSETUSB = 0x0D,
-};
-
-/*
- * Interrupt register offsets
- * Bank : 0x0E
- */
-#define AB5500_IT_SOURCE0_REG		0x20
-#define AB5500_IT_SOURCE1_REG		0x21
-#define AB5500_IT_SOURCE2_REG		0x22
-#define AB5500_IT_SOURCE3_REG		0x23
-#define AB5500_IT_SOURCE4_REG		0x24
-#define AB5500_IT_SOURCE5_REG		0x25
-#define AB5500_IT_SOURCE6_REG		0x26
-#define AB5500_IT_SOURCE7_REG		0x27
-#define AB5500_IT_SOURCE8_REG		0x28
-#define AB5500_IT_SOURCE9_REG		0x29
-#define AB5500_IT_SOURCE10_REG		0x2A
-#define AB5500_IT_SOURCE11_REG		0x2B
-#define AB5500_IT_SOURCE12_REG		0x2C
-#define AB5500_IT_SOURCE13_REG		0x2D
-#define AB5500_IT_SOURCE14_REG		0x2E
-#define AB5500_IT_SOURCE15_REG		0x2F
-#define AB5500_IT_SOURCE16_REG		0x30
-#define AB5500_IT_SOURCE17_REG		0x31
-#define AB5500_IT_SOURCE18_REG		0x32
-#define AB5500_IT_SOURCE19_REG		0x33
-#define AB5500_IT_SOURCE20_REG		0x34
-#define AB5500_IT_SOURCE21_REG		0x35
-#define AB5500_IT_SOURCE22_REG		0x36
-#define AB5500_IT_SOURCE23_REG		0x37
-
-#define AB5500_NUM_IRQ_REGS		23
-
-/**
- * struct ab5500
- * @access_mutex: lock out concurrent accesses to the AB registers
- * @dev: a pointer to the device struct for this chip driver
- * @ab5500_irq: the analog baseband irq
- * @irq_base: the platform configuration irq base for subdevices
- * @chip_name: name of this chip variant
- * @chip_id: 8 bit chip ID for this chip variant
- * @irq_lock: a lock to protect the mask
- * @abb_events: a local bit mask of the prcmu wakeup events
- * @event_mask: a local copy of the mask event registers
- * @last_event_mask: a copy of the last event_mask written to hardware
- * @startup_events: a copy of the first reading of the event registers
- * @startup_events_read: whether the first events have been read
- */
-struct ab5500 {
-	struct mutex access_mutex;
-	struct device *dev;
-	unsigned int ab5500_irq;
-	unsigned int irq_base;
-	char chip_name[32];
-	u8 chip_id;
-	struct mutex irq_lock;
-	u32 abb_events;
-	u8 mask[AB5500_NUM_IRQ_REGS];
-	u8 oldmask[AB5500_NUM_IRQ_REGS];
-	u8 startup_events[AB5500_NUM_IRQ_REGS];
-	bool startup_events_read;
-#ifdef CONFIG_DEBUG_FS
-	unsigned int debug_bank;
-	unsigned int debug_address;
-#endif
-};
-
-struct ab5500_platform_data {
-	struct {unsigned int base; unsigned int count; } irq;
-	void *dev_data[AB5500_NUM_DEVICES];
-	struct abx500_init_settings *init_settings;
-	unsigned int init_settings_sz;
-	bool pm_power_off;
-};
-
-#endif /* MFD_AB5500_H */
diff --git a/ANDROID_3.4.5/include/linux/mfd/abx500/ab8500-bm.h b/ANDROID_3.4.5/include/linux/mfd/abx500/ab8500-bm.h
deleted file mode 100644
index 44310c98..00000000
--- a/ANDROID_3.4.5/include/linux/mfd/abx500/ab8500-bm.h
+++ /dev/null
@@ -1,474 +0,0 @@
-/*
- * Copyright ST-Ericsson 2012.
- *
- * Author: Arun Murthy <arun.murthy@stericsson.com>
- * Licensed under GPLv2.
- */
-
-#ifndef _AB8500_BM_H
-#define _AB8500_BM_H
-
-#include <linux/kernel.h>
-#include <linux/mfd/abx500.h>
-
-/*
- * System control 2 register offsets.
- * bank = 0x02
- */
-#define AB8500_MAIN_WDOG_CTRL_REG	0x01
-#define AB8500_LOW_BAT_REG		0x03
-#define AB8500_BATT_OK_REG		0x04
-/*
- * USB/ULPI register offsets
- * Bank : 0x5
- */
-#define AB8500_USB_LINE_STAT_REG	0x80
-
-/*
- * Charger / status register offfsets
- * Bank : 0x0B
- */
-#define AB8500_CH_STATUS1_REG		0x00
-#define AB8500_CH_STATUS2_REG		0x01
-#define AB8500_CH_USBCH_STAT1_REG	0x02
-#define AB8500_CH_USBCH_STAT2_REG	0x03
-#define AB8500_CH_FSM_STAT_REG		0x04
-#define AB8500_CH_STAT_REG		0x05
-
-/*
- * Charger / control register offfsets
- * Bank : 0x0B
- */
-#define AB8500_CH_VOLT_LVL_REG		0x40
-#define AB8500_CH_VOLT_LVL_MAX_REG	0x41  /*Only in Cut2.0*/
-#define AB8500_CH_OPT_CRNTLVL_REG	0x42
-#define AB8500_CH_OPT_CRNTLVL_MAX_REG	0x43  /*Only in Cut2.0*/
-#define AB8500_CH_WD_TIMER_REG		0x50
-#define AB8500_CHARG_WD_CTRL		0x51
-#define AB8500_BTEMP_HIGH_TH		0x52
-#define AB8500_LED_INDICATOR_PWM_CTRL	0x53
-#define AB8500_LED_INDICATOR_PWM_DUTY	0x54
-#define AB8500_BATT_OVV			0x55
-#define AB8500_CHARGER_CTRL		0x56
-#define AB8500_BAT_CTRL_CURRENT_SOURCE	0x60  /*Only in Cut2.0*/
-
-/*
- * Charger / main control register offsets
- * Bank : 0x0B
- */
-#define AB8500_MCH_CTRL1		0x80
-#define AB8500_MCH_CTRL2		0x81
-#define AB8500_MCH_IPT_CURLVL_REG	0x82
-#define AB8500_CH_WD_REG		0x83
-
-/*
- * Charger / USB control register offsets
- * Bank : 0x0B
- */
-#define AB8500_USBCH_CTRL1_REG		0xC0
-#define AB8500_USBCH_CTRL2_REG		0xC1
-#define AB8500_USBCH_IPT_CRNTLVL_REG	0xC2
-
-/*
- * Gas Gauge register offsets
- * Bank : 0x0C
- */
-#define AB8500_GASG_CC_CTRL_REG		0x00
-#define AB8500_GASG_CC_ACCU1_REG	0x01
-#define AB8500_GASG_CC_ACCU2_REG	0x02
-#define AB8500_GASG_CC_ACCU3_REG	0x03
-#define AB8500_GASG_CC_ACCU4_REG	0x04
-#define AB8500_GASG_CC_SMPL_CNTRL_REG	0x05
-#define AB8500_GASG_CC_SMPL_CNTRH_REG	0x06
-#define AB8500_GASG_CC_SMPL_CNVL_REG	0x07
-#define AB8500_GASG_CC_SMPL_CNVH_REG	0x08
-#define AB8500_GASG_CC_CNTR_AVGOFF_REG	0x09
-#define AB8500_GASG_CC_OFFSET_REG	0x0A
-#define AB8500_GASG_CC_NCOV_ACCU	0x10
-#define AB8500_GASG_CC_NCOV_ACCU_CTRL	0x11
-#define AB8500_GASG_CC_NCOV_ACCU_LOW	0x12
-#define AB8500_GASG_CC_NCOV_ACCU_MED	0x13
-#define AB8500_GASG_CC_NCOV_ACCU_HIGH	0x14
-
-/*
- * Interrupt register offsets
- * Bank : 0x0E
- */
-#define AB8500_IT_SOURCE2_REG		0x01
-#define AB8500_IT_SOURCE21_REG		0x14
-
-/*
- * RTC register offsets
- * Bank: 0x0F
- */
-#define AB8500_RTC_BACKUP_CHG_REG	0x0C
-#define AB8500_RTC_CC_CONF_REG		0x01
-#define AB8500_RTC_CTRL_REG		0x0B
-
-/*
- * OTP register offsets
- * Bank : 0x15
- */
-#define AB8500_OTP_CONF_15		0x0E
-
-/* GPADC constants from AB8500 spec, UM0836 */
-#define ADC_RESOLUTION			1024
-#define ADC_CH_MAIN_MIN			0
-#define ADC_CH_MAIN_MAX			20030
-#define ADC_CH_VBUS_MIN			0
-#define ADC_CH_VBUS_MAX			20030
-#define ADC_CH_VBAT_MIN			2300
-#define ADC_CH_VBAT_MAX			4800
-#define ADC_CH_BKBAT_MIN		0
-#define ADC_CH_BKBAT_MAX		3200
-
-/* Main charge i/p current */
-#define MAIN_CH_IP_CUR_0P9A		0x80
-#define MAIN_CH_IP_CUR_1P0A		0x90
-#define MAIN_CH_IP_CUR_1P1A		0xA0
-#define MAIN_CH_IP_CUR_1P2A		0xB0
-#define MAIN_CH_IP_CUR_1P3A		0xC0
-#define MAIN_CH_IP_CUR_1P4A		0xD0
-#define MAIN_CH_IP_CUR_1P5A		0xE0
-
-/* ChVoltLevel */
-#define CH_VOL_LVL_3P5			0x00
-#define CH_VOL_LVL_4P0			0x14
-#define CH_VOL_LVL_4P05			0x16
-#define CH_VOL_LVL_4P1			0x1B
-#define CH_VOL_LVL_4P15			0x20
-#define CH_VOL_LVL_4P2			0x25
-#define CH_VOL_LVL_4P6			0x4D
-
-/* ChOutputCurrentLevel */
-#define CH_OP_CUR_LVL_0P1		0x00
-#define CH_OP_CUR_LVL_0P2		0x01
-#define CH_OP_CUR_LVL_0P3		0x02
-#define CH_OP_CUR_LVL_0P4		0x03
-#define CH_OP_CUR_LVL_0P5		0x04
-#define CH_OP_CUR_LVL_0P6		0x05
-#define CH_OP_CUR_LVL_0P7		0x06
-#define CH_OP_CUR_LVL_0P8		0x07
-#define CH_OP_CUR_LVL_0P9		0x08
-#define CH_OP_CUR_LVL_1P4		0x0D
-#define CH_OP_CUR_LVL_1P5		0x0E
-#define CH_OP_CUR_LVL_1P6		0x0F
-
-/* BTEMP High thermal limits */
-#define BTEMP_HIGH_TH_57_0		0x00
-#define BTEMP_HIGH_TH_52		0x01
-#define BTEMP_HIGH_TH_57_1		0x02
-#define BTEMP_HIGH_TH_62		0x03
-
-/* current is mA */
-#define USB_0P1A			100
-#define USB_0P2A			200
-#define USB_0P3A			300
-#define USB_0P4A			400
-#define USB_0P5A			500
-
-#define LOW_BAT_3P1V			0x20
-#define LOW_BAT_2P3V			0x00
-#define LOW_BAT_RESET			0x01
-#define LOW_BAT_ENABLE			0x01
-
-/* Backup battery constants */
-#define BUP_ICH_SEL_50UA		0x00
-#define BUP_ICH_SEL_150UA		0x04
-#define BUP_ICH_SEL_300UA		0x08
-#define BUP_ICH_SEL_700UA		0x0C
-
-#define BUP_VCH_SEL_2P5V		0x00
-#define BUP_VCH_SEL_2P6V		0x01
-#define BUP_VCH_SEL_2P8V		0x02
-#define BUP_VCH_SEL_3P1V		0x03
-
-/* Battery OVV constants */
-#define BATT_OVV_ENA			0x02
-#define BATT_OVV_TH_3P7			0x00
-#define BATT_OVV_TH_4P75		0x01
-
-/* A value to indicate over voltage */
-#define BATT_OVV_VALUE			4750
-
-/* VBUS OVV constants */
-#define VBUS_OVV_SELECT_MASK		0x78
-#define VBUS_OVV_SELECT_5P6V		0x00
-#define VBUS_OVV_SELECT_5P7V		0x08
-#define VBUS_OVV_SELECT_5P8V		0x10
-#define VBUS_OVV_SELECT_5P9V		0x18
-#define VBUS_OVV_SELECT_6P0V		0x20
-#define VBUS_OVV_SELECT_6P1V		0x28
-#define VBUS_OVV_SELECT_6P2V		0x30
-#define VBUS_OVV_SELECT_6P3V		0x38
-
-#define VBUS_AUTO_IN_CURR_LIM_ENA	0x04
-
-/* Fuel Gauge constants */
-#define RESET_ACCU			0x02
-#define READ_REQ			0x01
-#define CC_DEEP_SLEEP_ENA		0x02
-#define CC_PWR_UP_ENA			0x01
-#define CC_SAMPLES_40			0x28
-#define RD_NCONV_ACCU_REQ		0x01
-#define CC_CALIB			0x08
-#define CC_INTAVGOFFSET_ENA		0x10
-#define CC_MUXOFFSET			0x80
-#define CC_INT_CAL_N_AVG_MASK		0x60
-#define CC_INT_CAL_SAMPLES_16		0x40
-#define CC_INT_CAL_SAMPLES_8		0x20
-#define CC_INT_CAL_SAMPLES_4		0x00
-
-/* RTC constants */
-#define RTC_BUP_CH_ENA			0x10
-
-/* BatCtrl Current Source Constants */
-#define BAT_CTRL_7U_ENA			0x01
-#define BAT_CTRL_20U_ENA		0x02
-#define BAT_CTRL_CMP_ENA		0x04
-#define FORCE_BAT_CTRL_CMP_HIGH		0x08
-#define BAT_CTRL_PULL_UP_ENA		0x10
-
-/* Battery type */
-#define BATTERY_UNKNOWN			00
-
-/**
- * struct res_to_temp - defines one point in a temp to res curve. To
- * be used in battery packs that combines the identification resistor with a
- * NTC resistor.
- * @temp:			battery pack temperature in Celcius
- * @resist:			NTC resistor net total resistance
- */
-struct res_to_temp {
-	int temp;
-	int resist;
-};
-
-/**
- * struct batres_vs_temp - defines one point in a temp vs battery internal
- * resistance curve.
- * @temp:			battery pack temperature in Celcius
- * @resist:			battery internal reistance in mOhm
- */
-struct batres_vs_temp {
-	int temp;
-	int resist;
-};
-
-/* Forward declaration */
-struct ab8500_fg;
-
-/**
- * struct ab8500_fg_parameters - Fuel gauge algorithm parameters, in seconds
- * if not specified
- * @recovery_sleep_timer:	Time between measurements while recovering
- * @recovery_total_time:	Total recovery time
- * @init_timer:			Measurement interval during startup
- * @init_discard_time:		Time we discard voltage measurement at startup
- * @init_total_time:		Total init time during startup
- * @high_curr_time:		Time current has to be high to go to recovery
- * @accu_charging:		FG accumulation time while charging
- * @accu_high_curr:		FG accumulation time in high current mode
- * @high_curr_threshold:	High current threshold, in mA
- * @lowbat_threshold:		Low battery threshold, in mV
- * @battok_falling_th_sel0	Threshold in mV for battOk signal sel0
- *				Resolution in 50 mV step.
- * @battok_raising_th_sel1	Threshold in mV for battOk signal sel1
- *				Resolution in 50 mV step.
- * @user_cap_limit		Capacity reported from user must be within this
- *				limit to be considered as sane, in percentage
- *				points.
- * @maint_thres			This is the threshold where we stop reporting
- *				battery full while in maintenance, in per cent
- */
-struct ab8500_fg_parameters {
-	int recovery_sleep_timer;
-	int recovery_total_time;
-	int init_timer;
-	int init_discard_time;
-	int init_total_time;
-	int high_curr_time;
-	int accu_charging;
-	int accu_high_curr;
-	int high_curr_threshold;
-	int lowbat_threshold;
-	int battok_falling_th_sel0;
-	int battok_raising_th_sel1;
-	int user_cap_limit;
-	int maint_thres;
-};
-
-/**
- * struct ab8500_charger_maximization - struct used by the board config.
- * @use_maxi:		Enable maximization for this battery type
- * @maxi_chg_curr:	Maximum charger current allowed
- * @maxi_wait_cycles:	cycles to wait before setting charger current
- * @charger_curr_step	delta between two charger current settings (mA)
- */
-struct ab8500_maxim_parameters {
-	bool ena_maxi;
-	int chg_curr;
-	int wait_cycles;
-	int charger_curr_step;
-};
-
-/**
- * struct ab8500_bm_capacity_levels - ab8500 capacity level data
- * @critical:		critical capacity level in percent
- * @low:		low capacity level in percent
- * @normal:		normal capacity level in percent
- * @high:		high capacity level in percent
- * @full:		full capacity level in percent
- */
-struct ab8500_bm_capacity_levels {
-	int critical;
-	int low;
-	int normal;
-	int high;
-	int full;
-};
-
-/**
- * struct ab8500_bm_charger_parameters - Charger specific parameters
- * @usb_volt_max:	maximum allowed USB charger voltage in mV
- * @usb_curr_max:	maximum allowed USB charger current in mA
- * @ac_volt_max:	maximum allowed AC charger voltage in mV
- * @ac_curr_max:	maximum allowed AC charger current in mA
- */
-struct ab8500_bm_charger_parameters {
-	int usb_volt_max;
-	int usb_curr_max;
-	int ac_volt_max;
-	int ac_curr_max;
-};
-
-/**
- * struct ab8500_bm_data - ab8500 battery management data
- * @temp_under		under this temp, charging is stopped
- * @temp_low		between this temp and temp_under charging is reduced
- * @temp_high		between this temp and temp_over charging is reduced
- * @temp_over		over this temp, charging is stopped
- * @temp_interval_chg	temperature measurement interval in s when charging
- * @temp_interval_nochg	temperature measurement interval in s when not charging
- * @main_safety_tmr_h	safety timer for main charger
- * @usb_safety_tmr_h	safety timer for usb charger
- * @bkup_bat_v		voltage which we charge the backup battery with
- * @bkup_bat_i		current which we charge the backup battery with
- * @no_maintenance	indicates that maintenance charging is disabled
- * @adc_therm		placement of thermistor, batctrl or battemp adc
- * @chg_unknown_bat	flag to enable charging of unknown batteries
- * @enable_overshoot	flag to enable VBAT overshoot control
- * @fg_res		resistance of FG resistor in 0.1mOhm
- * @n_btypes		number of elements in array bat_type
- * @batt_id		index of the identified battery in array bat_type
- * @interval_charging	charge alg cycle period time when charging (sec)
- * @interval_not_charging charge alg cycle period time when not charging (sec)
- * @temp_hysteresis	temperature hysteresis
- * @gnd_lift_resistance	Battery ground to phone ground resistance (mOhm)
- * @maxi:		maximization parameters
- * @cap_levels		capacity in percent for the different capacity levels
- * @bat_type		table of supported battery types
- * @chg_params		charger parameters
- * @fg_params		fuel gauge parameters
- */
-struct ab8500_bm_data {
-	int temp_under;
-	int temp_low;
-	int temp_high;
-	int temp_over;
-	int temp_interval_chg;
-	int temp_interval_nochg;
-	int main_safety_tmr_h;
-	int usb_safety_tmr_h;
-	int bkup_bat_v;
-	int bkup_bat_i;
-	bool no_maintenance;
-	bool chg_unknown_bat;
-	bool enable_overshoot;
-	enum abx500_adc_therm adc_therm;
-	int fg_res;
-	int n_btypes;
-	int batt_id;
-	int interval_charging;
-	int interval_not_charging;
-	int temp_hysteresis;
-	int gnd_lift_resistance;
-	const struct ab8500_maxim_parameters *maxi;
-	const struct ab8500_bm_capacity_levels *cap_levels;
-	const struct ab8500_bm_charger_parameters *chg_params;
-	const struct ab8500_fg_parameters *fg_params;
-};
-
-struct ab8500_charger_platform_data {
-	char **supplied_to;
-	size_t num_supplicants;
-	bool autopower_cfg;
-};
-
-struct ab8500_btemp_platform_data {
-	char **supplied_to;
-	size_t num_supplicants;
-};
-
-struct ab8500_fg_platform_data {
-	char **supplied_to;
-	size_t num_supplicants;
-};
-
-struct ab8500_chargalg_platform_data {
-	char **supplied_to;
-	size_t num_supplicants;
-};
-struct ab8500_btemp;
-struct ab8500_gpadc;
-struct ab8500_fg;
-#ifdef CONFIG_AB8500_BM
-void ab8500_fg_reinit(void);
-void ab8500_charger_usb_state_changed(u8 bm_usb_state, u16 mA);
-struct ab8500_btemp *ab8500_btemp_get(void);
-int ab8500_btemp_get_batctrl_temp(struct ab8500_btemp *btemp);
-struct ab8500_fg *ab8500_fg_get(void);
-int ab8500_fg_inst_curr_blocking(struct ab8500_fg *dev);
-int ab8500_fg_inst_curr_start(struct ab8500_fg *di);
-int ab8500_fg_inst_curr_finalize(struct ab8500_fg *di, int *res);
-int ab8500_fg_inst_curr_done(struct ab8500_fg *di);
-
-#else
-int ab8500_fg_inst_curr_done(struct ab8500_fg *di)
-{
-}
-static void ab8500_fg_reinit(void)
-{
-}
-static void ab8500_charger_usb_state_changed(u8 bm_usb_state, u16 mA)
-{
-}
-static struct ab8500_btemp *ab8500_btemp_get(void)
-{
-	return NULL;
-}
-static int ab8500_btemp_get_batctrl_temp(struct ab8500_btemp *btemp)
-{
-	return 0;
-}
-struct ab8500_fg *ab8500_fg_get(void)
-{
-	return NULL;
-}
-static int ab8500_fg_inst_curr_blocking(struct ab8500_fg *dev)
-{
-	return -ENODEV;
-}
-
-static inline int ab8500_fg_inst_curr_start(struct ab8500_fg *di)
-{
-	return -ENODEV;
-}
-
-static inline int ab8500_fg_inst_curr_finalize(struct ab8500_fg *di, int *res)
-{
-	return -ENODEV;
-}
-
-#endif
-#endif /* _AB8500_BM_H */
diff --git a/ANDROID_3.4.5/include/linux/mfd/abx500/ab8500-gpadc.h b/ANDROID_3.4.5/include/linux/mfd/abx500/ab8500-gpadc.h
deleted file mode 100644
index 25296676..00000000
--- a/ANDROID_3.4.5/include/linux/mfd/abx500/ab8500-gpadc.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * Copyright (C) 2010 ST-Ericsson SA
- * Licensed under GPLv2.
- *
- * Author: Arun R Murthy <arun.murthy@stericsson.com>
- * Author: Daniel Willerud <daniel.willerud@stericsson.com>
- */
-
-#ifndef	_AB8500_GPADC_H
-#define _AB8500_GPADC_H
-
-/* GPADC source: From datasheet(ADCSwSel[4:0] in GPADCCtrl2) */
-#define BAT_CTRL	0x01
-#define BTEMP_BALL	0x02
-#define MAIN_CHARGER_V	0x03
-#define ACC_DETECT1	0x04
-#define ACC_DETECT2	0x05
-#define ADC_AUX1	0x06
-#define ADC_AUX2	0x07
-#define MAIN_BAT_V	0x08
-#define VBUS_V		0x09
-#define MAIN_CHARGER_C	0x0A
-#define USB_CHARGER_C	0x0B
-#define BK_BAT_V	0x0C
-#define DIE_TEMP	0x0D
-
-struct ab8500_gpadc;
-
-struct ab8500_gpadc *ab8500_gpadc_get(char *name);
-int ab8500_gpadc_convert(struct ab8500_gpadc *gpadc, u8 channel);
-int ab8500_gpadc_read_raw(struct ab8500_gpadc *gpadc, u8 channel);
-int ab8500_gpadc_ad_to_voltage(struct ab8500_gpadc *gpadc,
-    u8 channel, int ad_value);
-
-#endif /* _AB8500_GPADC_H */
diff --git a/ANDROID_3.4.5/include/linux/mfd/abx500/ab8500-gpio.h b/ANDROID_3.4.5/include/linux/mfd/abx500/ab8500-gpio.h
deleted file mode 100644
index 2387c207..00000000
--- a/ANDROID_3.4.5/include/linux/mfd/abx500/ab8500-gpio.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * Copyright ST-Ericsson 2010.
- *
- * Author: Bibek Basu <bibek.basu@stericsson.com>
- * Licensed under GPLv2.
- */
-
-#ifndef _AB8500_GPIO_H
-#define _AB8500_GPIO_H
-
-/*
- * Platform data to register a block: only the initial gpio/irq number.
- * Array sizes are large enough to contain all AB8500 and AB9540 GPIO
- * registers.
- */
-
-struct ab8500_gpio_platform_data {
-	int gpio_base;
-	u32 irq_base;
-	u8  config_reg[8];
-};
-
-#endif /* _AB8500_GPIO_H */
diff --git a/ANDROID_3.4.5/include/linux/mfd/abx500/ab8500-sysctrl.h b/ANDROID_3.4.5/include/linux/mfd/abx500/ab8500-sysctrl.h
deleted file mode 100644
index 10eb5097..00000000
--- a/ANDROID_3.4.5/include/linux/mfd/abx500/ab8500-sysctrl.h
+++ /dev/null
@@ -1,297 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- * Author: Mattias Nilsson <mattias.i.nilsson@stericsson.com> for ST Ericsson.
- * License terms: GNU General Public License (GPL) version 2
- */
-#ifndef __AB8500_SYSCTRL_H
-#define __AB8500_SYSCTRL_H
-
-#include <linux/bitops.h>
-
-#ifdef CONFIG_AB8500_CORE
-
-int ab8500_sysctrl_read(u16 reg, u8 *value);
-int ab8500_sysctrl_write(u16 reg, u8 mask, u8 value);
-
-#else
-
-static inline int ab8500_sysctrl_read(u16 reg, u8 *value)
-{
-	return 0;
-}
-
-static inline int ab8500_sysctrl_write(u16 reg, u8 mask, u8 value)
-{
-	return 0;
-}
-
-#endif /* CONFIG_AB8500_CORE */
-
-static inline int ab8500_sysctrl_set(u16 reg, u8 bits)
-{
-	return ab8500_sysctrl_write(reg, bits, bits);
-}
-
-static inline int ab8500_sysctrl_clear(u16 reg, u8 bits)
-{
-	return ab8500_sysctrl_write(reg, bits, 0);
-}
-
-/* Registers */
-#define AB8500_TURNONSTATUS		0x100
-#define AB8500_RESETSTATUS		0x101
-#define AB8500_PONKEY1PRESSSTATUS	0x102
-#define AB8500_SYSCLKREQSTATUS		0x142
-#define AB8500_STW4500CTRL1		0x180
-#define AB8500_STW4500CTRL2		0x181
-#define AB8500_STW4500CTRL3		0x200
-#define AB8500_MAINWDOGCTRL		0x201
-#define AB8500_MAINWDOGTIMER		0x202
-#define AB8500_LOWBAT			0x203
-#define AB8500_BATTOK			0x204
-#define AB8500_SYSCLKTIMER		0x205
-#define AB8500_SMPSCLKCTRL		0x206
-#define AB8500_SMPSCLKSEL1		0x207
-#define AB8500_SMPSCLKSEL2		0x208
-#define AB8500_SMPSCLKSEL3		0x209
-#define AB8500_SYSULPCLKCONF		0x20A
-#define AB8500_SYSULPCLKCTRL1		0x20B
-#define AB8500_SYSCLKCTRL		0x20C
-#define AB8500_SYSCLKREQ1VALID		0x20D
-#define AB8500_SYSTEMCTRLSUP		0x20F
-#define AB8500_SYSCLKREQ1RFCLKBUF	0x210
-#define AB8500_SYSCLKREQ2RFCLKBUF	0x211
-#define AB8500_SYSCLKREQ3RFCLKBUF	0x212
-#define AB8500_SYSCLKREQ4RFCLKBUF	0x213
-#define AB8500_SYSCLKREQ5RFCLKBUF	0x214
-#define AB8500_SYSCLKREQ6RFCLKBUF	0x215
-#define AB8500_SYSCLKREQ7RFCLKBUF	0x216
-#define AB8500_SYSCLKREQ8RFCLKBUF	0x217
-#define AB8500_DITHERCLKCTRL		0x220
-#define AB8500_SWATCTRL			0x230
-#define AB8500_HIQCLKCTRL		0x232
-#define AB8500_VSIMSYSCLKCTRL		0x233
-#define AB9540_SYSCLK12BUFCTRL		0x234
-#define AB9540_SYSCLK12CONFCTRL		0x235
-#define AB9540_SYSCLK12BUFCTRL2		0x236
-#define AB9540_SYSCLK12BUF1VALID	0x237
-#define AB9540_SYSCLK12BUF2VALID	0x238
-#define AB9540_SYSCLK12BUF3VALID	0x239
-#define AB9540_SYSCLK12BUF4VALID	0x23A
-
-/* Bits */
-#define AB8500_TURNONSTATUS_PORNVBAT BIT(0)
-#define AB8500_TURNONSTATUS_PONKEY1DBF BIT(1)
-#define AB8500_TURNONSTATUS_PONKEY2DBF BIT(2)
-#define AB8500_TURNONSTATUS_RTCALARM BIT(3)
-#define AB8500_TURNONSTATUS_MAINCHDET BIT(4)
-#define AB8500_TURNONSTATUS_VBUSDET BIT(5)
-#define AB8500_TURNONSTATUS_USBIDDETECT BIT(6)
-
-#define AB8500_RESETSTATUS_RESETN4500NSTATUS BIT(0)
-#define AB8500_RESETSTATUS_SWRESETN4500NSTATUS BIT(2)
-
-#define AB8500_PONKEY1PRESSSTATUS_PONKEY1PRESSTIME_MASK 0x7F
-#define AB8500_PONKEY1PRESSSTATUS_PONKEY1PRESSTIME_SHIFT 0
-
-#define AB8500_SYSCLKREQSTATUS_SYSCLKREQ1STATUS BIT(0)
-#define AB8500_SYSCLKREQSTATUS_SYSCLKREQ2STATUS BIT(1)
-#define AB8500_SYSCLKREQSTATUS_SYSCLKREQ3STATUS BIT(2)
-#define AB8500_SYSCLKREQSTATUS_SYSCLKREQ4STATUS BIT(3)
-#define AB8500_SYSCLKREQSTATUS_SYSCLKREQ5STATUS BIT(4)
-#define AB8500_SYSCLKREQSTATUS_SYSCLKREQ6STATUS BIT(5)
-#define AB8500_SYSCLKREQSTATUS_SYSCLKREQ7STATUS BIT(6)
-#define AB8500_SYSCLKREQSTATUS_SYSCLKREQ8STATUS BIT(7)
-
-#define AB8500_STW4500CTRL1_SWOFF BIT(0)
-#define AB8500_STW4500CTRL1_SWRESET4500N BIT(1)
-#define AB8500_STW4500CTRL1_THDB8500SWOFF BIT(2)
-
-#define AB8500_STW4500CTRL2_RESETNVAUX1VALID BIT(0)
-#define AB8500_STW4500CTRL2_RESETNVAUX2VALID BIT(1)
-#define AB8500_STW4500CTRL2_RESETNVAUX3VALID BIT(2)
-#define AB8500_STW4500CTRL2_RESETNVMODVALID BIT(3)
-#define AB8500_STW4500CTRL2_RESETNVEXTSUPPLY1VALID BIT(4)
-#define AB8500_STW4500CTRL2_RESETNVEXTSUPPLY2VALID BIT(5)
-#define AB8500_STW4500CTRL2_RESETNVEXTSUPPLY3VALID BIT(6)
-#define AB8500_STW4500CTRL2_RESETNVSMPS1VALID BIT(7)
-
-#define AB8500_STW4500CTRL3_CLK32KOUT2DIS BIT(0)
-#define AB8500_STW4500CTRL3_RESETAUDN BIT(1)
-#define AB8500_STW4500CTRL3_RESETDENCN BIT(2)
-#define AB8500_STW4500CTRL3_THSDENA BIT(3)
-
-#define AB8500_MAINWDOGCTRL_MAINWDOGENA BIT(0)
-#define AB8500_MAINWDOGCTRL_MAINWDOGKICK BIT(1)
-#define AB8500_MAINWDOGCTRL_WDEXPTURNONVALID BIT(4)
-
-#define AB8500_MAINWDOGTIMER_MAINWDOGTIMER_MASK 0x7F
-#define AB8500_MAINWDOGTIMER_MAINWDOGTIMER_SHIFT 0
-
-#define AB8500_LOWBAT_LOWBATENA BIT(0)
-#define AB8500_LOWBAT_LOWBAT_MASK 0x7E
-#define AB8500_LOWBAT_LOWBAT_SHIFT 1
-
-#define AB8500_BATTOK_BATTOKSEL0THF_MASK 0x0F
-#define AB8500_BATTOK_BATTOKSEL0THF_SHIFT 0
-#define AB8500_BATTOK_BATTOKSEL1THF_MASK 0xF0
-#define AB8500_BATTOK_BATTOKSEL1THF_SHIFT 4
-
-#define AB8500_SYSCLKTIMER_SYSCLKTIMER_MASK 0x0F
-#define AB8500_SYSCLKTIMER_SYSCLKTIMER_SHIFT 0
-#define AB8500_SYSCLKTIMER_SYSCLKTIMERADJ_MASK 0xF0
-#define AB8500_SYSCLKTIMER_SYSCLKTIMERADJ_SHIFT 4
-
-#define AB8500_SMPSCLKCTRL_SMPSCLKINTSEL_MASK 0x03
-#define AB8500_SMPSCLKCTRL_SMPSCLKINTSEL_SHIFT 0
-#define AB8500_SMPSCLKCTRL_3M2CLKINTENA BIT(2)
-
-#define AB8500_SMPSCLKSEL1_VARMCLKSEL_MASK 0x07
-#define AB8500_SMPSCLKSEL1_VARMCLKSEL_SHIFT 0
-#define AB8500_SMPSCLKSEL1_VAPECLKSEL_MASK 0x38
-#define AB8500_SMPSCLKSEL1_VAPECLKSEL_SHIFT 3
-
-#define AB8500_SMPSCLKSEL2_VMODCLKSEL_MASK 0x07
-#define AB8500_SMPSCLKSEL2_VMODCLKSEL_SHIFT 0
-#define AB8500_SMPSCLKSEL2_VSMPS1CLKSEL_MASK 0x38
-#define AB8500_SMPSCLKSEL2_VSMPS1CLKSEL_SHIFT 3
-
-#define AB8500_SMPSCLKSEL3_VSMPS2CLKSEL_MASK 0x07
-#define AB8500_SMPSCLKSEL3_VSMPS2CLKSEL_SHIFT 0
-#define AB8500_SMPSCLKSEL3_VSMPS3CLKSEL_MASK 0x38
-#define AB8500_SMPSCLKSEL3_VSMPS3CLKSEL_SHIFT 3
-
-#define AB8500_SYSULPCLKCONF_ULPCLKCONF_MASK 0x03
-#define AB8500_SYSULPCLKCONF_ULPCLKCONF_SHIFT 0
-#define AB8500_SYSULPCLKCONF_CLK27MHZSTRE BIT(2)
-#define AB8500_SYSULPCLKCONF_TVOUTCLKDELN BIT(3)
-#define AB8500_SYSULPCLKCONF_TVOUTCLKINV BIT(4)
-#define AB8500_SYSULPCLKCONF_ULPCLKSTRE BIT(5)
-#define AB8500_SYSULPCLKCONF_CLK27MHZBUFENA BIT(6)
-#define AB8500_SYSULPCLKCONF_CLK27MHZPDENA BIT(7)
-
-#define AB8500_SYSULPCLKCTRL1_SYSULPCLKINTSEL_MASK 0x03
-#define AB8500_SYSULPCLKCTRL1_SYSULPCLKINTSEL_SHIFT 0
-#define AB8500_SYSULPCLKCTRL1_ULPCLKREQ BIT(2)
-#define AB8500_SYSULPCLKCTRL1_4500SYSCLKREQ BIT(3)
-#define AB8500_SYSULPCLKCTRL1_AUDIOCLKENA BIT(4)
-#define AB8500_SYSULPCLKCTRL1_SYSCLKBUF2REQ BIT(5)
-#define AB8500_SYSULPCLKCTRL1_SYSCLKBUF3REQ BIT(6)
-#define AB8500_SYSULPCLKCTRL1_SYSCLKBUF4REQ BIT(7)
-
-#define AB8500_SYSCLKCTRL_TVOUTPLLENA BIT(0)
-#define AB8500_SYSCLKCTRL_TVOUTCLKENA BIT(1)
-#define AB8500_SYSCLKCTRL_USBCLKENA BIT(2)
-
-#define AB8500_SYSCLKREQ1VALID_SYSCLKREQ1VALID BIT(0)
-#define AB8500_SYSCLKREQ1VALID_ULPCLKREQ1VALID BIT(1)
-#define AB8500_SYSCLKREQ1VALID_USBSYSCLKREQ1VALID BIT(2)
-
-#define AB8500_SYSTEMCTRLSUP_EXTSUP12LPNCLKSEL_MASK 0x03
-#define AB8500_SYSTEMCTRLSUP_EXTSUP12LPNCLKSEL_SHIFT 0
-#define AB8500_SYSTEMCTRLSUP_EXTSUP3LPNCLKSEL_MASK 0x0C
-#define AB8500_SYSTEMCTRLSUP_EXTSUP3LPNCLKSEL_SHIFT 2
-#define AB8500_SYSTEMCTRLSUP_INTDB8500NOD BIT(4)
-
-#define AB8500_SYSCLKREQ1RFCLKBUF_SYSCLKREQ1RFCLKBUF2 BIT(2)
-#define AB8500_SYSCLKREQ1RFCLKBUF_SYSCLKREQ1RFCLKBUF3 BIT(3)
-#define AB8500_SYSCLKREQ1RFCLKBUF_SYSCLKREQ1RFCLKBUF4 BIT(4)
-
-#define AB8500_SYSCLKREQ2RFCLKBUF_SYSCLKREQ2RFCLKBUF2 BIT(2)
-#define AB8500_SYSCLKREQ2RFCLKBUF_SYSCLKREQ2RFCLKBUF3 BIT(3)
-#define AB8500_SYSCLKREQ2RFCLKBUF_SYSCLKREQ2RFCLKBUF4 BIT(4)
-
-#define AB8500_SYSCLKREQ3RFCLKBUF_SYSCLKREQ3RFCLKBUF2 BIT(2)
-#define AB8500_SYSCLKREQ3RFCLKBUF_SYSCLKREQ3RFCLKBUF3 BIT(3)
-#define AB8500_SYSCLKREQ3RFCLKBUF_SYSCLKREQ3RFCLKBUF4 BIT(4)
-
-#define AB8500_SYSCLKREQ4RFCLKBUF_SYSCLKREQ4RFCLKBUF2 BIT(2)
-#define AB8500_SYSCLKREQ4RFCLKBUF_SYSCLKREQ4RFCLKBUF3 BIT(3)
-#define AB8500_SYSCLKREQ4RFCLKBUF_SYSCLKREQ4RFCLKBUF4 BIT(4)
-
-#define AB8500_SYSCLKREQ5RFCLKBUF_SYSCLKREQ5RFCLKBUF2 BIT(2)
-#define AB8500_SYSCLKREQ5RFCLKBUF_SYSCLKREQ5RFCLKBUF3 BIT(3)
-#define AB8500_SYSCLKREQ5RFCLKBUF_SYSCLKREQ5RFCLKBUF4 BIT(4)
-
-#define AB8500_SYSCLKREQ6RFCLKBUF_SYSCLKREQ6RFCLKBUF2 BIT(2)
-#define AB8500_SYSCLKREQ6RFCLKBUF_SYSCLKREQ6RFCLKBUF3 BIT(3)
-#define AB8500_SYSCLKREQ6RFCLKBUF_SYSCLKREQ6RFCLKBUF4 BIT(4)
-
-#define AB8500_SYSCLKREQ7RFCLKBUF_SYSCLKREQ7RFCLKBUF2 BIT(2)
-#define AB8500_SYSCLKREQ7RFCLKBUF_SYSCLKREQ7RFCLKBUF3 BIT(3)
-#define AB8500_SYSCLKREQ7RFCLKBUF_SYSCLKREQ7RFCLKBUF4 BIT(4)
-
-#define AB8500_SYSCLKREQ8RFCLKBUF_SYSCLKREQ8RFCLKBUF2 BIT(2)
-#define AB8500_SYSCLKREQ8RFCLKBUF_SYSCLKREQ8RFCLKBUF3 BIT(3)
-#define AB8500_SYSCLKREQ8RFCLKBUF_SYSCLKREQ8RFCLKBUF4 BIT(4)
-
-#define AB8500_DITHERCLKCTRL_VARMDITHERENA BIT(0)
-#define AB8500_DITHERCLKCTRL_VSMPS3DITHERENA BIT(1)
-#define AB8500_DITHERCLKCTRL_VSMPS1DITHERENA BIT(2)
-#define AB8500_DITHERCLKCTRL_VSMPS2DITHERENA BIT(3)
-#define AB8500_DITHERCLKCTRL_VMODDITHERENA BIT(4)
-#define AB8500_DITHERCLKCTRL_VAPEDITHERENA BIT(5)
-#define AB8500_DITHERCLKCTRL_DITHERDEL_MASK 0xC0
-#define AB8500_DITHERCLKCTRL_DITHERDEL_SHIFT 6
-
-#define AB8500_SWATCTRL_UPDATERF BIT(0)
-#define AB8500_SWATCTRL_SWATENABLE BIT(1)
-#define AB8500_SWATCTRL_RFOFFTIMER_MASK 0x1C
-#define AB8500_SWATCTRL_RFOFFTIMER_SHIFT 2
-#define AB8500_SWATCTRL_SWATBIT5 BIT(6)
-
-#define AB8500_HIQCLKCTRL_SYSCLKREQ1HIQENAVALID BIT(0)
-#define AB8500_HIQCLKCTRL_SYSCLKREQ2HIQENAVALID BIT(1)
-#define AB8500_HIQCLKCTRL_SYSCLKREQ3HIQENAVALID BIT(2)
-#define AB8500_HIQCLKCTRL_SYSCLKREQ4HIQENAVALID BIT(3)
-#define AB8500_HIQCLKCTRL_SYSCLKREQ5HIQENAVALID BIT(4)
-#define AB8500_HIQCLKCTRL_SYSCLKREQ6HIQENAVALID BIT(5)
-#define AB8500_HIQCLKCTRL_SYSCLKREQ7HIQENAVALID BIT(6)
-#define AB8500_HIQCLKCTRL_SYSCLKREQ8HIQENAVALID BIT(7)
-
-#define AB8500_VSIMSYSCLKCTRL_VSIMSYSCLKREQ1VALID BIT(0)
-#define AB8500_VSIMSYSCLKCTRL_VSIMSYSCLKREQ2VALID BIT(1)
-#define AB8500_VSIMSYSCLKCTRL_VSIMSYSCLKREQ3VALID BIT(2)
-#define AB8500_VSIMSYSCLKCTRL_VSIMSYSCLKREQ4VALID BIT(3)
-#define AB8500_VSIMSYSCLKCTRL_VSIMSYSCLKREQ5VALID BIT(4)
-#define AB8500_VSIMSYSCLKCTRL_VSIMSYSCLKREQ6VALID BIT(5)
-#define AB8500_VSIMSYSCLKCTRL_VSIMSYSCLKREQ7VALID BIT(6)
-#define AB8500_VSIMSYSCLKCTRL_VSIMSYSCLKREQ8VALID BIT(7)
-
-#define AB9540_SYSCLK12BUFCTRL_SYSCLK12BUF1ENA BIT(0)
-#define AB9540_SYSCLK12BUFCTRL_SYSCLK12BUF2ENA BIT(1)
-#define AB9540_SYSCLK12BUFCTRL_SYSCLK12BUF3ENA BIT(2)
-#define AB9540_SYSCLK12BUFCTRL_SYSCLK12BUF4ENA BIT(3)
-#define AB9540_SYSCLK12BUFCTRL_SYSCLK12BUFENA_MASK 0x0F
-#define AB9540_SYSCLK12BUFCTRL_SYSCLK12BUF1STRE BIT(4)
-#define AB9540_SYSCLK12BUFCTRL_SYSCLK12BUF2STRE BIT(5)
-#define AB9540_SYSCLK12BUFCTRL_SYSCLK12BUF3STRE BIT(6)
-#define AB9540_SYSCLK12BUFCTRL_SYSCLK12BUF4STRE BIT(7)
-#define AB9540_SYSCLK12BUFCTRL_SYSCLK12BUFSTRE_MASK 0xF0
-
-#define AB9540_SYSCLK12CONFCTRL_PLL26TO38ENA BIT(0)
-#define AB9540_SYSCLK12CONFCTRL_SYSCLK12USBMUXSEL BIT(1)
-#define AB9540_SYSCLK12CONFCTRL_INT384MHZMUXSEL_MASK 0x0C
-#define AB9540_SYSCLK12CONFCTRL_INT384MHZMUXSEL_SHIFT 2
-#define AB9540_SYSCLK12CONFCTRL_SYSCLK12BUFMUX BIT(4)
-#define AB9540_SYSCLK12CONFCTRL_SYSCLK12PLLMUX BIT(5)
-#define AB9540_SYSCLK12CONFCTRL_SYSCLK2MUXVALID BIT(6)
-
-#define AB9540_SYSCLK12BUFCTRL2_SYSCLK12BUF1PDENA BIT(0)
-#define AB9540_SYSCLK12BUFCTRL2_SYSCLK12BUF2PDENA BIT(1)
-#define AB9540_SYSCLK12BUFCTRL2_SYSCLK12BUF3PDENA BIT(2)
-#define AB9540_SYSCLK12BUFCTRL2_SYSCLK12BUF4PDENA BIT(3)
-
-#define AB9540_SYSCLK12BUF1VALID_SYSCLK12BUF1VALID_MASK 0xFF
-#define AB9540_SYSCLK12BUF1VALID_SYSCLK12BUF1VALID_SHIFT 0
-
-#define AB9540_SYSCLK12BUF2VALID_SYSCLK12BUF2VALID_MASK 0xFF
-#define AB9540_SYSCLK12BUF2VALID_SYSCLK12BUF2VALID_SHIFT 0
-
-#define AB9540_SYSCLK12BUF3VALID_SYSCLK12BUF3VALID_MASK 0xFF
-#define AB9540_SYSCLK12BUF3VALID_SYSCLK12BUF3VALID_SHIFT 0
-
-#define AB9540_SYSCLK12BUF4VALID_SYSCLK12BUF4VALID_MASK 0xFF
-#define AB9540_SYSCLK12BUF4VALID_SYSCLK12BUF4VALID_SHIFT 0
-
-#endif /* __AB8500_SYSCTRL_H */
diff --git a/ANDROID_3.4.5/include/linux/mfd/abx500/ab8500.h b/ANDROID_3.4.5/include/linux/mfd/abx500/ab8500.h
deleted file mode 100644
index fccc3002..00000000
--- a/ANDROID_3.4.5/include/linux/mfd/abx500/ab8500.h
+++ /dev/null
@@ -1,327 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * License Terms: GNU General Public License v2
- * Author: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
- */
-#ifndef MFD_AB8500_H
-#define MFD_AB8500_H
-
-#include <linux/mutex.h>
-
-struct device;
-
-/*
- * AB IC versions
- *
- * AB8500_VERSION_AB8500 should be 0xFF but will never be read as need a
- * non-supported multi-byte I2C access via PRCMU. Set to 0x00 to ease the
- * print of version string.
- */
-enum ab8500_version {
-	AB8500_VERSION_AB8500 = 0x0,
-	AB8500_VERSION_AB8505 = 0x1,
-	AB8500_VERSION_AB9540 = 0x2,
-	AB8500_VERSION_AB8540 = 0x3,
-	AB8500_VERSION_UNDEFINED,
-};
-
-/* AB8500 CIDs*/
-#define AB8500_CUTEARLY	0x00
-#define AB8500_CUT1P0	0x10
-#define AB8500_CUT1P1	0x11
-#define AB8500_CUT2P0	0x20
-#define AB8500_CUT3P0	0x30
-#define AB8500_CUT3P3	0x33
-
-/*
- * AB8500 bank addresses
- */
-#define AB8500_SYS_CTRL1_BLOCK	0x1
-#define AB8500_SYS_CTRL2_BLOCK	0x2
-#define AB8500_REGU_CTRL1	0x3
-#define AB8500_REGU_CTRL2	0x4
-#define AB8500_USB		0x5
-#define AB8500_TVOUT		0x6
-#define AB8500_DBI		0x7
-#define AB8500_ECI_AV_ACC	0x8
-#define AB8500_RESERVED		0x9
-#define AB8500_GPADC		0xA
-#define AB8500_CHARGER		0xB
-#define AB8500_GAS_GAUGE	0xC
-#define AB8500_AUDIO		0xD
-#define AB8500_INTERRUPT	0xE
-#define AB8500_RTC		0xF
-#define AB8500_MISC		0x10
-#define AB8500_DEVELOPMENT	0x11
-#define AB8500_DEBUG		0x12
-#define AB8500_PROD_TEST	0x13
-#define AB8500_OTP_EMUL		0x15
-
-/*
- * Interrupts
- * Values used to index into array ab8500_irq_regoffset[] defined in
- * drivers/mdf/ab8500-core.c
- */
-/* Definitions for AB8500 and AB9540 */
-/* ab8500_irq_regoffset[0] -> IT[Source|Latch|Mask]1 */
-#define AB8500_INT_MAIN_EXT_CH_NOT_OK	0 /* not 8505/9540 */
-#define AB8500_INT_UN_PLUG_TV_DET	1 /* not 8505/9540 */
-#define AB8500_INT_PLUG_TV_DET		2 /* not 8505/9540 */
-#define AB8500_INT_TEMP_WARM		3
-#define AB8500_INT_PON_KEY2DB_F		4
-#define AB8500_INT_PON_KEY2DB_R		5
-#define AB8500_INT_PON_KEY1DB_F		6
-#define AB8500_INT_PON_KEY1DB_R		7
-/* ab8500_irq_regoffset[1] -> IT[Source|Latch|Mask]2 */
-#define AB8500_INT_BATT_OVV		8
-#define AB8500_INT_MAIN_CH_UNPLUG_DET	10 /* not 8505 */
-#define AB8500_INT_MAIN_CH_PLUG_DET	11 /* not 8505 */
-#define AB8500_INT_VBUS_DET_F		14
-#define AB8500_INT_VBUS_DET_R		15
-/* ab8500_irq_regoffset[2] -> IT[Source|Latch|Mask]3 */
-#define AB8500_INT_VBUS_CH_DROP_END	16
-#define AB8500_INT_RTC_60S		17
-#define AB8500_INT_RTC_ALARM		18
-#define AB8500_INT_BAT_CTRL_INDB	20
-#define AB8500_INT_CH_WD_EXP		21
-#define AB8500_INT_VBUS_OVV		22
-#define AB8500_INT_MAIN_CH_DROP_END	23 /* not 8505/9540 */
-/* ab8500_irq_regoffset[3] -> IT[Source|Latch|Mask]4 */
-#define AB8500_INT_CCN_CONV_ACC		24
-#define AB8500_INT_INT_AUD		25
-#define AB8500_INT_CCEOC		26
-#define AB8500_INT_CC_INT_CALIB		27
-#define AB8500_INT_LOW_BAT_F		28
-#define AB8500_INT_LOW_BAT_R		29
-#define AB8500_INT_BUP_CHG_NOT_OK	30
-#define AB8500_INT_BUP_CHG_OK		31
-/* ab8500_irq_regoffset[4] -> IT[Source|Latch|Mask]5 */
-#define AB8500_INT_GP_HW_ADC_CONV_END	32 /* not 8505 */
-#define AB8500_INT_ACC_DETECT_1DB_F	33
-#define AB8500_INT_ACC_DETECT_1DB_R	34
-#define AB8500_INT_ACC_DETECT_22DB_F	35
-#define AB8500_INT_ACC_DETECT_22DB_R	36
-#define AB8500_INT_ACC_DETECT_21DB_F	37
-#define AB8500_INT_ACC_DETECT_21DB_R	38
-#define AB8500_INT_GP_SW_ADC_CONV_END	39
-/* ab8500_irq_regoffset[5] -> IT[Source|Latch|Mask]7 */
-#define AB8500_INT_GPIO6R		40 /* not 8505/9540 */
-#define AB8500_INT_GPIO7R		41 /* not 8505/9540 */
-#define AB8500_INT_GPIO8R		42 /* not 8505/9540 */
-#define AB8500_INT_GPIO9R		43 /* not 8505/9540 */
-#define AB8500_INT_GPIO10R		44
-#define AB8500_INT_GPIO11R		45
-#define AB8500_INT_GPIO12R		46 /* not 8505 */
-#define AB8500_INT_GPIO13R		47
-/* ab8500_irq_regoffset[6] -> IT[Source|Latch|Mask]8 */
-#define AB8500_INT_GPIO24R		48 /* not 8505 */
-#define AB8500_INT_GPIO25R		49 /* not 8505 */
-#define AB8500_INT_GPIO36R		50 /* not 8505/9540 */
-#define AB8500_INT_GPIO37R		51 /* not 8505/9540 */
-#define AB8500_INT_GPIO38R		52 /* not 8505/9540 */
-#define AB8500_INT_GPIO39R		53 /* not 8505/9540 */
-#define AB8500_INT_GPIO40R		54
-#define AB8500_INT_GPIO41R		55
-/* ab8500_irq_regoffset[7] -> IT[Source|Latch|Mask]9 */
-#define AB8500_INT_GPIO6F		56 /* not 8505/9540 */
-#define AB8500_INT_GPIO7F		57 /* not 8505/9540 */
-#define AB8500_INT_GPIO8F		58 /* not 8505/9540 */
-#define AB8500_INT_GPIO9F		59 /* not 8505/9540 */
-#define AB8500_INT_GPIO10F		60
-#define AB8500_INT_GPIO11F		61
-#define AB8500_INT_GPIO12F		62 /* not 8505 */
-#define AB8500_INT_GPIO13F		63
-/* ab8500_irq_regoffset[8] -> IT[Source|Latch|Mask]10 */
-#define AB8500_INT_GPIO24F		64 /* not 8505 */
-#define AB8500_INT_GPIO25F		65 /* not 8505 */
-#define AB8500_INT_GPIO36F		66 /* not 8505/9540 */
-#define AB8500_INT_GPIO37F		67 /* not 8505/9540 */
-#define AB8500_INT_GPIO38F		68 /* not 8505/9540 */
-#define AB8500_INT_GPIO39F		69 /* not 8505/9540 */
-#define AB8500_INT_GPIO40F		70
-#define AB8500_INT_GPIO41F		71
-/* ab8500_irq_regoffset[9] -> IT[Source|Latch|Mask]12 */
-#define AB8500_INT_ADP_SOURCE_ERROR	72
-#define AB8500_INT_ADP_SINK_ERROR	73
-#define AB8500_INT_ADP_PROBE_PLUG	74
-#define AB8500_INT_ADP_PROBE_UNPLUG	75
-#define AB8500_INT_ADP_SENSE_OFF	76
-#define AB8500_INT_USB_PHY_POWER_ERR	78
-#define AB8500_INT_USB_LINK_STATUS	79
-/* ab8500_irq_regoffset[10] -> IT[Source|Latch|Mask]19 */
-#define AB8500_INT_BTEMP_LOW		80
-#define AB8500_INT_BTEMP_LOW_MEDIUM	81
-#define AB8500_INT_BTEMP_MEDIUM_HIGH	82
-#define AB8500_INT_BTEMP_HIGH		83
-/* ab8500_irq_regoffset[11] -> IT[Source|Latch|Mask]20 */
-#define AB8500_INT_SRP_DETECT		88
-#define AB8500_INT_USB_CHARGER_NOT_OKR	89
-#define AB8500_INT_ID_WAKEUP_R		90
-#define AB8500_INT_ID_DET_R1R		92
-#define AB8500_INT_ID_DET_R2R		93
-#define AB8500_INT_ID_DET_R3R		94
-#define AB8500_INT_ID_DET_R4R		95
-/* ab8500_irq_regoffset[12] -> IT[Source|Latch|Mask]21 */
-#define AB8500_INT_ID_WAKEUP_F		96
-#define AB8500_INT_ID_DET_R1F		98
-#define AB8500_INT_ID_DET_R2F		99
-#define AB8500_INT_ID_DET_R3F		100
-#define AB8500_INT_ID_DET_R4F		101
-#define AB8500_INT_CHAUTORESTARTAFTSEC  102
-#define AB8500_INT_CHSTOPBYSEC		103
-/* ab8500_irq_regoffset[13] -> IT[Source|Latch|Mask]22 */
-#define AB8500_INT_USB_CH_TH_PROT_F	104
-#define AB8500_INT_USB_CH_TH_PROT_R    105
-#define AB8500_INT_MAIN_CH_TH_PROT_F	106 /* not 8505/9540 */
-#define AB8500_INT_MAIN_CH_TH_PROT_R	107 /* not 8505/9540 */
-#define AB8500_INT_CHCURLIMNOHSCHIRP	109
-#define AB8500_INT_CHCURLIMHSCHIRP	110
-#define AB8500_INT_XTAL32K_KO		111
-
-/* Definitions for AB9540 */
-/* ab8500_irq_regoffset[14] -> IT[Source|Latch|Mask]13 */
-#define AB9540_INT_GPIO50R		113
-#define AB9540_INT_GPIO51R		114 /* not 8505 */
-#define AB9540_INT_GPIO52R		115
-#define AB9540_INT_GPIO53R		116
-#define AB9540_INT_GPIO54R		117 /* not 8505 */
-#define AB9540_INT_IEXT_CH_RF_BFN_R	118
-#define AB9540_INT_IEXT_CH_RF_BFN_F	119
-/* ab8500_irq_regoffset[15] -> IT[Source|Latch|Mask]14 */
-#define AB9540_INT_GPIO50F		121
-#define AB9540_INT_GPIO51F		122 /* not 8505 */
-#define AB9540_INT_GPIO52F		123
-#define AB9540_INT_GPIO53F		124
-#define AB9540_INT_GPIO54F		125 /* not 8505 */
-
-/*
- * AB8500_AB9540_NR_IRQS is used when configuring the IRQ numbers for the
- * entire platform. This is a "compile time" constant so this must be set to
- * the largest possible value that may be encountered with different AB SOCs.
- * Of the currently supported AB devices, AB8500 and AB9540, it is the AB9540
- * which is larger.
- */
-#define AB8500_NR_IRQS			112
-#define AB8505_NR_IRQS			128
-#define AB9540_NR_IRQS			128
-/* This is set to the roof of any AB8500 chip variant IRQ counts */
-#define AB8500_MAX_NR_IRQS		AB9540_NR_IRQS
-
-#define AB8500_NUM_IRQ_REGS		14
-#define AB9540_NUM_IRQ_REGS		17
-
-/**
- * struct ab8500 - ab8500 internal structure
- * @dev: parent device
- * @lock: read/write operations lock
- * @irq_lock: genirq bus lock
- * @irq: irq line
- * @version: chip version id (e.g. ab8500 or ab9540)
- * @chip_id: chip revision id
- * @write: register write
- * @write_masked: masked register write
- * @read: register read
- * @rx_buf: rx buf for SPI
- * @tx_buf: tx buf for SPI
- * @mask: cache of IRQ regs for bus lock
- * @oldmask: cache of previous IRQ regs for bus lock
- * @mask_size: Actual number of valid entries in mask[], oldmask[] and
- * irq_reg_offset
- * @irq_reg_offset: Array of offsets into IRQ registers
- */
-struct ab8500 {
-	struct device	*dev;
-	struct mutex	lock;
-	struct mutex	irq_lock;
-
-	int		irq_base;
-	int		irq;
-	enum ab8500_version version;
-	u8		chip_id;
-
-	int (*write)(struct ab8500 *ab8500, u16 addr, u8 data);
-	int (*write_masked)(struct ab8500 *ab8500, u16 addr, u8 mask, u8 data);
-	int (*read)(struct ab8500 *ab8500, u16 addr);
-
-	unsigned long	tx_buf[4];
-	unsigned long	rx_buf[4];
-
-	u8 *mask;
-	u8 *oldmask;
-	int mask_size;
-	const int *irq_reg_offset;
-};
-
-struct regulator_reg_init;
-struct regulator_init_data;
-struct ab8500_gpio_platform_data;
-
-/**
- * struct ab8500_platform_data - AB8500 platform data
- * @irq_base: start of AB8500 IRQs, AB8500_NR_IRQS will be used
- * @init: board-specific initialization after detection of ab8500
- * @num_regulator_reg_init: number of regulator init registers
- * @regulator_reg_init: regulator init registers
- * @num_regulator: number of regulators
- * @regulator: machine-specific constraints for regulators
- */
-struct ab8500_platform_data {
-	int irq_base;
-	void (*init) (struct ab8500 *);
-	int num_regulator_reg_init;
-	struct ab8500_regulator_reg_init *regulator_reg_init;
-	int num_regulator;
-	struct regulator_init_data *regulator;
-	struct ab8500_gpio_platform_data *gpio;
-};
-
-extern int __devinit ab8500_init(struct ab8500 *ab8500,
-				 enum ab8500_version version);
-extern int __devexit ab8500_exit(struct ab8500 *ab8500);
-
-static inline int is_ab8500(struct ab8500 *ab)
-{
-	return ab->version == AB8500_VERSION_AB8500;
-}
-
-static inline int is_ab8505(struct ab8500 *ab)
-{
-	return ab->version == AB8500_VERSION_AB8505;
-}
-
-static inline int is_ab9540(struct ab8500 *ab)
-{
-	return ab->version == AB8500_VERSION_AB9540;
-}
-
-static inline int is_ab8540(struct ab8500 *ab)
-{
-	return ab->version == AB8500_VERSION_AB8540;
-}
-
-/* exclude also ab8505, ab9540... */
-static inline int is_ab8500_1p0_or_earlier(struct ab8500 *ab)
-{
-	return (is_ab8500(ab) && (ab->chip_id <= AB8500_CUT1P0));
-}
-
-/* exclude also ab8505, ab9540... */
-static inline int is_ab8500_1p1_or_earlier(struct ab8500 *ab)
-{
-	return (is_ab8500(ab) && (ab->chip_id <= AB8500_CUT1P1));
-}
-
-/* exclude also ab8505, ab9540... */
-static inline int is_ab8500_2p0_or_earlier(struct ab8500 *ab)
-{
-	return (is_ab8500(ab) && (ab->chip_id <= AB8500_CUT2P0));
-}
-
-/* exclude also ab8505, ab9540... */
-static inline int is_ab8500_2p0(struct ab8500 *ab)
-{
-	return (is_ab8500(ab) && (ab->chip_id == AB8500_CUT2P0));
-}
-
-#endif /* MFD_AB8500_H */
diff --git a/ANDROID_3.4.5/include/linux/mfd/abx500/ux500_chargalg.h b/ANDROID_3.4.5/include/linux/mfd/abx500/ux500_chargalg.h
deleted file mode 100644
index 9b077257..00000000
--- a/ANDROID_3.4.5/include/linux/mfd/abx500/ux500_chargalg.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2012
- * Author: Johan Gardsmark <johan.gardsmark@stericsson.com> for ST-Ericsson.
- * License terms:  GNU General Public License (GPL), version 2
- */
-
-#ifndef _UX500_CHARGALG_H
-#define _UX500_CHARGALG_H
-
-#include <linux/power_supply.h>
-
-#define psy_to_ux500_charger(x) container_of((x), \
-		struct ux500_charger, psy)
-
-/* Forward declaration */
-struct ux500_charger;
-
-struct ux500_charger_ops {
-	int (*enable) (struct ux500_charger *, int, int, int);
-	int (*kick_wd) (struct ux500_charger *);
-	int (*update_curr) (struct ux500_charger *, int);
-};
-
-/**
- * struct ux500_charger - power supply ux500 charger sub class
- * @psy			power supply base class
- * @ops			ux500 charger operations
- * @max_out_volt	maximum output charger voltage in mV
- * @max_out_curr	maximum output charger current in mA
- */
-struct ux500_charger {
-	struct power_supply psy;
-	struct ux500_charger_ops ops;
-	int max_out_volt;
-	int max_out_curr;
-};
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/mfd/adp5520.h b/ANDROID_3.4.5/include/linux/mfd/adp5520.h
deleted file mode 100644
index ac37558a..00000000
--- a/ANDROID_3.4.5/include/linux/mfd/adp5520.h
+++ /dev/null
@@ -1,299 +0,0 @@
-/*
- * Definitions and platform data for Analog Devices
- * ADP5520/ADP5501 MFD PMICs (Backlight, LED, GPIO and Keys)
- *
- * Copyright 2009 Analog Devices Inc.
- *
- * Licensed under the GPL-2 or later.
- */
-
-
-#ifndef __LINUX_MFD_ADP5520_H
-#define __LINUX_MFD_ADP5520_H
-
-#define ID_ADP5520		5520
-#define ID_ADP5501		5501
-
-/*
- * ADP5520/ADP5501 Register Map
- */
-
-#define ADP5520_MODE_STATUS 		0x00
-#define ADP5520_INTERRUPT_ENABLE 	0x01
-#define ADP5520_BL_CONTROL 		0x02
-#define ADP5520_BL_TIME 		0x03
-#define ADP5520_BL_FADE 		0x04
-#define ADP5520_DAYLIGHT_MAX 		0x05
-#define ADP5520_DAYLIGHT_DIM 		0x06
-#define ADP5520_OFFICE_MAX 		0x07
-#define ADP5520_OFFICE_DIM 		0x08
-#define ADP5520_DARK_MAX 		0x09
-#define ADP5520_DARK_DIM 		0x0A
-#define ADP5520_BL_VALUE 		0x0B
-#define ADP5520_ALS_CMPR_CFG 		0x0C
-#define ADP5520_L2_TRIP 		0x0D
-#define ADP5520_L2_HYS 			0x0E
-#define ADP5520_L3_TRIP 		0x0F
-#define ADP5520_L3_HYS 			0x10
-#define ADP5520_LED_CONTROL 		0x11
-#define ADP5520_LED_TIME 		0x12
-#define ADP5520_LED_FADE 		0x13
-#define ADP5520_LED1_CURRENT 		0x14
-#define ADP5520_LED2_CURRENT 		0x15
-#define ADP5520_LED3_CURRENT 		0x16
-
-/*
- * ADP5520 Register Map
- */
-
-#define ADP5520_GPIO_CFG_1 		0x17
-#define ADP5520_GPIO_CFG_2 		0x18
-#define ADP5520_GPIO_IN 		0x19
-#define ADP5520_GPIO_OUT 		0x1A
-#define ADP5520_GPIO_INT_EN 		0x1B
-#define ADP5520_GPIO_INT_STAT 		0x1C
-#define ADP5520_GPIO_INT_LVL 		0x1D
-#define ADP5520_GPIO_DEBOUNCE 		0x1E
-#define ADP5520_GPIO_PULLUP 		0x1F
-#define ADP5520_KP_INT_STAT_1 		0x20
-#define ADP5520_KP_INT_STAT_2 		0x21
-#define ADP5520_KR_INT_STAT_1 		0x22
-#define ADP5520_KR_INT_STAT_2 		0x23
-#define ADP5520_KEY_STAT_1 		0x24
-#define ADP5520_KEY_STAT_2 		0x25
-
-/*
- * MODE_STATUS bits
- */
-
-#define ADP5520_nSTNBY		(1 << 7)
-#define ADP5520_BL_EN           (1 << 6)
-#define ADP5520_DIM_EN          (1 << 5)
-#define ADP5520_OVP_INT         (1 << 4)
-#define ADP5520_CMPR_INT        (1 << 3)
-#define ADP5520_GPI_INT         (1 << 2)
-#define ADP5520_KR_INT          (1 << 1)
-#define ADP5520_KP_INT          (1 << 0)
-
-/*
- * INTERRUPT_ENABLE bits
- */
-
-#define ADP5520_AUTO_LD_EN      (1 << 4)
-#define ADP5520_CMPR_IEN        (1 << 3)
-#define ADP5520_OVP_IEN         (1 << 2)
-#define ADP5520_KR_IEN          (1 << 1)
-#define ADP5520_KP_IEN          (1 << 0)
-
-/*
- * BL_CONTROL bits
- */
-
-#define ADP5520_BL_LVL          ((x) << 5)
-#define ADP5520_BL_LAW          ((x) << 4)
-#define ADP5520_BL_AUTO_ADJ     (1 << 3)
-#define ADP5520_OVP_EN          (1 << 2)
-#define ADP5520_FOVR            (1 << 1)
-#define ADP5520_KP_BL_EN        (1 << 0)
-
-/*
- * ALS_CMPR_CFG bits
- */
-
-#define ADP5520_L3_OUT		(1 << 3)
-#define ADP5520_L2_OUT		(1 << 2)
-#define ADP5520_L3_EN		(1 << 1)
-
-#define ADP5020_MAX_BRIGHTNESS	0x7F
-
-#define FADE_VAL(in, out)	((0xF & (in)) | ((0xF & (out)) << 4))
-#define BL_CTRL_VAL(law, auto)	(((1 & (auto)) << 3) | ((0x3 & (law)) << 4))
-#define ALS_CMPR_CFG_VAL(filt, l3_en)	(((0x7 & filt) << 5) | l3_en)
-
-/*
- * LEDs subdevice bits and masks
- */
-
-#define ADP5520_01_MAXLEDS 3
-
-#define ADP5520_FLAG_LED_MASK 		0x3
-#define ADP5520_FLAG_OFFT_SHIFT 	8
-#define ADP5520_FLAG_OFFT_MASK 		0x3
-
-#define ADP5520_R3_MODE		(1 << 5)
-#define ADP5520_C3_MODE		(1 << 4)
-#define ADP5520_LED_LAW		(1 << 3)
-#define ADP5520_LED3_EN		(1 << 2)
-#define ADP5520_LED2_EN		(1 << 1)
-#define ADP5520_LED1_EN		(1 << 0)
-
-/*
- * GPIO subdevice bits and masks
- */
-
-#define ADP5520_MAXGPIOS	8
-
-#define ADP5520_GPIO_C3		(1 << 7)	/* LED2 or GPIO7 aka C3 */
-#define ADP5520_GPIO_C2		(1 << 6)
-#define ADP5520_GPIO_C1		(1 << 5)
-#define ADP5520_GPIO_C0		(1 << 4)
-#define ADP5520_GPIO_R3		(1 << 3)	/* LED3 or GPIO3 aka R3 */
-#define ADP5520_GPIO_R2		(1 << 2)
-#define ADP5520_GPIO_R1		(1 << 1)
-#define ADP5520_GPIO_R0		(1 << 0)
-
-struct adp5520_gpio_platform_data {
-	unsigned gpio_start;
-	u8 gpio_en_mask;
-	u8 gpio_pullup_mask;
-};
-
-/*
- * Keypad subdevice bits and masks
- */
-
-#define ADP5520_MAXKEYS	16
-
-#define ADP5520_COL_C3 		(1 << 7)	/* LED2 or GPIO7 aka C3 */
-#define ADP5520_COL_C2		(1 << 6)
-#define ADP5520_COL_C1		(1 << 5)
-#define ADP5520_COL_C0		(1 << 4)
-#define ADP5520_ROW_R3		(1 << 3)	/* LED3 or GPIO3 aka R3 */
-#define ADP5520_ROW_R2		(1 << 2)
-#define ADP5520_ROW_R1		(1 << 1)
-#define ADP5520_ROW_R0		(1 << 0)
-
-#define ADP5520_KEY(row, col) (col + row * 4)
-#define ADP5520_KEYMAPSIZE	ADP5520_MAXKEYS
-
-struct adp5520_keys_platform_data {
-	int rows_en_mask;		/* Number of rows */
-	int cols_en_mask;		/* Number of columns */
-	const unsigned short *keymap;	/* Pointer to keymap */
-	unsigned short keymapsize;	/* Keymap size */
-	unsigned repeat:1;		/* Enable key repeat */
-};
-
-
-/*
- * LEDs subdevice platform data
- */
-
-#define FLAG_ID_ADP5520_LED1_ADP5501_LED0 	1	/* ADP5520 PIN ILED */
-#define FLAG_ID_ADP5520_LED2_ADP5501_LED1 	2	/* ADP5520 PIN C3 */
-#define FLAG_ID_ADP5520_LED3_ADP5501_LED2 	3	/* ADP5520 PIN R3 */
-
-#define ADP5520_LED_DIS_BLINK	(0 << ADP5520_FLAG_OFFT_SHIFT)
-#define ADP5520_LED_OFFT_600ms	(1 << ADP5520_FLAG_OFFT_SHIFT)
-#define ADP5520_LED_OFFT_800ms	(2 << ADP5520_FLAG_OFFT_SHIFT)
-#define ADP5520_LED_OFFT_1200ms	(3 << ADP5520_FLAG_OFFT_SHIFT)
-
-#define ADP5520_LED_ONT_200ms	0
-#define ADP5520_LED_ONT_600ms	1
-#define ADP5520_LED_ONT_800ms	2
-#define ADP5520_LED_ONT_1200ms	3
-
-struct adp5520_leds_platform_data {
-	int num_leds;
-	struct led_info	*leds;
-	u8 fade_in;		/* Backlight Fade-In Timer */
-	u8 fade_out;		/* Backlight Fade-Out Timer */
-	u8 led_on_time;
-};
-
-/*
- * Backlight subdevice platform data
- */
-
-#define ADP5520_FADE_T_DIS	0	/* Fade Timer Disabled */
-#define ADP5520_FADE_T_300ms	1	/* 0.3 Sec */
-#define ADP5520_FADE_T_600ms	2
-#define ADP5520_FADE_T_900ms	3
-#define ADP5520_FADE_T_1200ms	4
-#define ADP5520_FADE_T_1500ms	5
-#define ADP5520_FADE_T_1800ms	6
-#define ADP5520_FADE_T_2100ms	7
-#define ADP5520_FADE_T_2400ms	8
-#define ADP5520_FADE_T_2700ms	9
-#define ADP5520_FADE_T_3000ms	10
-#define ADP5520_FADE_T_3500ms	11
-#define ADP5520_FADE_T_4000ms	12
-#define ADP5520_FADE_T_4500ms	13
-#define ADP5520_FADE_T_5000ms	14
-#define ADP5520_FADE_T_5500ms	15	/* 5.5 Sec */
-
-#define ADP5520_BL_LAW_LINEAR 	0
-#define ADP5520_BL_LAW_SQUARE 	1
-#define ADP5520_BL_LAW_CUBIC1 	2
-#define ADP5520_BL_LAW_CUBIC2 	3
-
-#define ADP5520_BL_AMBL_FILT_80ms 	0	/* Light sensor filter time */
-#define ADP5520_BL_AMBL_FILT_160ms 	1
-#define ADP5520_BL_AMBL_FILT_320ms 	2
-#define ADP5520_BL_AMBL_FILT_640ms 	3
-#define ADP5520_BL_AMBL_FILT_1280ms 	4
-#define ADP5520_BL_AMBL_FILT_2560ms 	5
-#define ADP5520_BL_AMBL_FILT_5120ms 	6
-#define ADP5520_BL_AMBL_FILT_10240ms 	7	/* 10.24 sec */
-
-	/*
-	 * Blacklight current 0..30mA
-	 */
-#define ADP5520_BL_CUR_mA(I)		((I * 127) / 30)
-
-	/*
-	 * L2 comparator current 0..1000uA
-	 */
-#define ADP5520_L2_COMP_CURR_uA(I)	((I * 255) / 1000)
-
-	/*
-	 * L3 comparator current 0..127uA
-	 */
-#define ADP5520_L3_COMP_CURR_uA(I)	((I * 255) / 127)
-
-struct adp5520_backlight_platform_data {
-	u8 fade_in;		/* Backlight Fade-In Timer */
-	u8 fade_out;		/* Backlight Fade-Out Timer */
-	u8 fade_led_law;	/* fade-on/fade-off transfer characteristic */
-
-	u8 en_ambl_sens;	/* 1 = enable ambient light sensor */
-	u8 abml_filt;		/* Light sensor filter time */
-	u8 l1_daylight_max;	/* use BL_CUR_mA(I) 0 <= I <= 30 mA */
-	u8 l1_daylight_dim;	/* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */
-	u8 l2_office_max;	/* use BL_CUR_mA(I) 0 <= I <= 30 mA */
-	u8 l2_office_dim;	/* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */
-	u8 l3_dark_max;		/* use BL_CUR_mA(I) 0 <= I <= 30 mA */
-	u8 l3_dark_dim;		/* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */
-	u8 l2_trip;		/* use L2_COMP_CURR_uA(I) 0 <= I <= 1000 uA */
-	u8 l2_hyst;		/* use L2_COMP_CURR_uA(I) 0 <= I <= 1000 uA */
-	u8 l3_trip;		/* use L3_COMP_CURR_uA(I) 0 <= I <= 127 uA */
-	u8 l3_hyst;		/* use L3_COMP_CURR_uA(I) 0 <= I <= 127 uA */
-};
-
-/*
- * MFD chip platform data
- */
-
-struct adp5520_platform_data {
-	struct adp5520_keys_platform_data *keys;
-	struct adp5520_gpio_platform_data *gpio;
-	struct adp5520_leds_platform_data *leds;
-	struct adp5520_backlight_platform_data *backlight;
-};
-
-/*
- * MFD chip functions
- */
-
-extern int adp5520_read(struct device *dev, int reg, uint8_t *val);
-extern int adp5520_write(struct device *dev, int reg, u8 val);
-extern int adp5520_clr_bits(struct device *dev, int reg, uint8_t bit_mask);
-extern int adp5520_set_bits(struct device *dev, int reg, uint8_t bit_mask);
-
-extern int adp5520_register_notifier(struct device *dev,
-		 struct notifier_block *nb, unsigned int events);
-
-extern int adp5520_unregister_notifier(struct device *dev,
-		struct notifier_block *nb, unsigned int events);
-
-#endif /* __LINUX_MFD_ADP5520_H */
diff --git a/ANDROID_3.4.5/include/linux/mfd/anatop.h b/ANDROID_3.4.5/include/linux/mfd/anatop.h
deleted file mode 100644
index 22c1007d..00000000
--- a/ANDROID_3.4.5/include/linux/mfd/anatop.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- * anatop.h - Anatop MFD driver
- *
- *  Copyright (C) 2012 Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org>
- *  Copyright (C) 2012 Linaro
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __LINUX_MFD_ANATOP_H
-#define __LINUX_MFD_ANATOP_H
-
-#include <linux/spinlock.h>
-
-/**
- * anatop - MFD data
- * @ioreg: ioremap register
- * @reglock: spinlock for register read/write
- */
-struct anatop {
-	void *ioreg;
-	spinlock_t reglock;
-};
-
-extern u32 anatop_get_bits(struct anatop *, u32, int, int);
-extern void anatop_set_bits(struct anatop *, u32, int, int, u32);
-
-#endif /*  __LINUX_MFD_ANATOP_H */
diff --git a/ANDROID_3.4.5/include/linux/mfd/asic3.h b/ANDROID_3.4.5/include/linux/mfd/asic3.h
deleted file mode 100644
index ed793b77..00000000
--- a/ANDROID_3.4.5/include/linux/mfd/asic3.h
+++ /dev/null
@@ -1,313 +0,0 @@
-/*
- * include/linux/mfd/asic3.h
- *
- * Compaq ASIC3 headers.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Copyright 2001 Compaq Computer Corporation.
- * Copyright 2007-2008 OpenedHand Ltd.
- */
-
-#ifndef __ASIC3_H__
-#define __ASIC3_H__
-
-#include <linux/types.h>
-
-struct led_classdev;
-struct asic3_led {
-	const char	*name;
-	const char	*default_trigger;
-	struct led_classdev *cdev;
-};
-
-struct asic3_platform_data {
-	u16 *gpio_config;
-	unsigned int gpio_config_num;
-
-	unsigned int irq_base;
-
-	unsigned int gpio_base;
-
-	struct asic3_led *leds;
-};
-
-#define ASIC3_NUM_GPIO_BANKS	4
-#define ASIC3_GPIOS_PER_BANK	16
-#define ASIC3_NUM_GPIOS		64
-#define ASIC3_NR_IRQS		ASIC3_NUM_GPIOS + 6
-
-#define ASIC3_IRQ_LED0		64
-#define ASIC3_IRQ_LED1		65
-#define ASIC3_IRQ_LED2		66
-#define ASIC3_IRQ_SPI		67
-#define ASIC3_IRQ_SMBUS		68
-#define ASIC3_IRQ_OWM		69
-
-#define ASIC3_TO_GPIO(gpio) (NR_BUILTIN_GPIO + (gpio))
-
-#define ASIC3_GPIO_BANK_A	0
-#define ASIC3_GPIO_BANK_B	1
-#define ASIC3_GPIO_BANK_C	2
-#define ASIC3_GPIO_BANK_D	3
-
-#define ASIC3_GPIO(bank, gpio) \
-	((ASIC3_GPIOS_PER_BANK * ASIC3_GPIO_BANK_##bank) + (gpio))
-#define ASIC3_GPIO_bit(gpio) (1 << (gpio & 0xf))
-/* All offsets below are specified with this address bus shift */
-#define ASIC3_DEFAULT_ADDR_SHIFT 2
-
-#define ASIC3_OFFSET(base, reg) (ASIC3_##base##_BASE + ASIC3_##base##_##reg)
-#define ASIC3_GPIO_OFFSET(base, reg) \
-	(ASIC3_GPIO_##base##_BASE + ASIC3_GPIO_##reg)
-
-#define ASIC3_GPIO_A_BASE      0x0000
-#define ASIC3_GPIO_B_BASE      0x0100
-#define ASIC3_GPIO_C_BASE      0x0200
-#define ASIC3_GPIO_D_BASE      0x0300
-
-#define ASIC3_GPIO_TO_BANK(gpio) ((gpio) >> 4)
-#define ASIC3_GPIO_TO_BIT(gpio)  ((gpio) - \
-				  (ASIC3_GPIOS_PER_BANK * ((gpio) >> 4)))
-#define ASIC3_GPIO_TO_MASK(gpio) (1 << ASIC3_GPIO_TO_BIT(gpio))
-#define ASIC3_GPIO_TO_BASE(gpio) (ASIC3_GPIO_A_BASE + (((gpio) >> 4) * 0x0100))
-#define ASIC3_BANK_TO_BASE(bank) (ASIC3_GPIO_A_BASE + ((bank) * 0x100))
-
-#define ASIC3_GPIO_MASK          0x00    /* R/W 0:don't mask */
-#define ASIC3_GPIO_DIRECTION     0x04    /* R/W 0:input */
-#define ASIC3_GPIO_OUT           0x08    /* R/W 0:output low */
-#define ASIC3_GPIO_TRIGGER_TYPE  0x0c    /* R/W 0:level */
-#define ASIC3_GPIO_EDGE_TRIGGER  0x10    /* R/W 0:falling */
-#define ASIC3_GPIO_LEVEL_TRIGGER 0x14    /* R/W 0:low level detect */
-#define ASIC3_GPIO_SLEEP_MASK    0x18    /* R/W 0:don't mask in sleep mode */
-#define ASIC3_GPIO_SLEEP_OUT     0x1c    /* R/W level 0:low in sleep mode */
-#define ASIC3_GPIO_BAT_FAULT_OUT 0x20    /* R/W level 0:low in batt_fault */
-#define ASIC3_GPIO_INT_STATUS    0x24    /* R/W 0:none, 1:detect */
-#define ASIC3_GPIO_ALT_FUNCTION  0x28	 /* R/W 1:LED register control */
-#define ASIC3_GPIO_SLEEP_CONF    0x2c    /*
-					  * R/W bit 1: autosleep
-					  * 0: disable gposlpout in normal mode,
-					  * enable gposlpout in sleep mode.
-					  */
-#define ASIC3_GPIO_STATUS        0x30    /* R   Pin status */
-
-/*
- * ASIC3 GPIO config
- *
- * Bits 0..6   gpio number
- * Bits 7..13  Alternate function
- * Bit  14     Direction
- * Bit  15     Initial value
- *
- */
-#define ASIC3_CONFIG_GPIO_PIN(config) ((config) & 0x7f)
-#define ASIC3_CONFIG_GPIO_ALT(config)  (((config) & (0x7f << 7)) >> 7)
-#define ASIC3_CONFIG_GPIO_DIR(config)  ((config & (1 << 14)) >> 14)
-#define ASIC3_CONFIG_GPIO_INIT(config) ((config & (1 << 15)) >> 15)
-#define ASIC3_CONFIG_GPIO(gpio, alt, dir, init) (((gpio) & 0x7f) \
-	| (((alt) & 0x7f) << 7) | (((dir) & 0x1) << 14) \
-	| (((init) & 0x1) << 15))
-#define ASIC3_CONFIG_GPIO_DEFAULT(gpio, dir, init) \
-	ASIC3_CONFIG_GPIO((gpio), 0, (dir), (init))
-#define ASIC3_CONFIG_GPIO_DEFAULT_OUT(gpio, init) \
-	ASIC3_CONFIG_GPIO((gpio), 0, 1, (init))
-
-/*
- * Alternate functions
- */
-#define ASIC3_GPIOA11_PWM0		ASIC3_CONFIG_GPIO(11, 1, 1, 0)
-#define ASIC3_GPIOA12_PWM1		ASIC3_CONFIG_GPIO(12, 1, 1, 0)
-#define ASIC3_GPIOA15_CONTROL_CX	ASIC3_CONFIG_GPIO(15, 1, 1, 0)
-#define ASIC3_GPIOC0_LED0		ASIC3_CONFIG_GPIO(32, 1, 0, 0)
-#define ASIC3_GPIOC1_LED1		ASIC3_CONFIG_GPIO(33, 1, 0, 0)
-#define ASIC3_GPIOC2_LED2		ASIC3_CONFIG_GPIO(34, 1, 0, 0)
-#define ASIC3_GPIOC3_SPI_RXD		ASIC3_CONFIG_GPIO(35, 1, 0, 0)
-#define ASIC3_GPIOC4_CF_nCD		ASIC3_CONFIG_GPIO(36, 1, 0, 0)
-#define ASIC3_GPIOC4_SPI_TXD		ASIC3_CONFIG_GPIO(36, 1, 1, 0)
-#define ASIC3_GPIOC5_SPI_CLK		ASIC3_CONFIG_GPIO(37, 1, 1, 0)
-#define ASIC3_GPIOC5_nCIOW		ASIC3_CONFIG_GPIO(37, 1, 1, 0)
-#define ASIC3_GPIOC6_nCIOR		ASIC3_CONFIG_GPIO(38, 1, 1, 0)
-#define ASIC3_GPIOC7_nPCE_1		ASIC3_CONFIG_GPIO(39, 1, 0, 0)
-#define ASIC3_GPIOC8_nPCE_2		ASIC3_CONFIG_GPIO(40, 1, 0, 0)
-#define ASIC3_GPIOC9_nPOE		ASIC3_CONFIG_GPIO(41, 1, 0, 0)
-#define ASIC3_GPIOC10_nPWE		ASIC3_CONFIG_GPIO(42, 1, 0, 0)
-#define ASIC3_GPIOC11_PSKTSEL		ASIC3_CONFIG_GPIO(43, 1, 0, 0)
-#define ASIC3_GPIOC12_nPREG		ASIC3_CONFIG_GPIO(44, 1, 0, 0)
-#define ASIC3_GPIOC13_nPWAIT		ASIC3_CONFIG_GPIO(45, 1, 1, 0)
-#define ASIC3_GPIOC14_nPIOIS16		ASIC3_CONFIG_GPIO(46, 1, 1, 0)
-#define ASIC3_GPIOC15_nPIOR		ASIC3_CONFIG_GPIO(47, 1, 0, 0)
-#define ASIC3_GPIOD11_nCIOIS16		ASIC3_CONFIG_GPIO(59, 1, 0, 0)
-#define ASIC3_GPIOD12_nCWAIT		ASIC3_CONFIG_GPIO(60, 1, 0, 0)
-#define ASIC3_GPIOD15_nPIOW		ASIC3_CONFIG_GPIO(63, 1, 0, 0)
-
-
-#define ASIC3_SPI_Base		      0x0400
-#define ASIC3_SPI_Control               0x0000
-#define ASIC3_SPI_TxData                0x0004
-#define ASIC3_SPI_RxData                0x0008
-#define ASIC3_SPI_Int                   0x000c
-#define ASIC3_SPI_Status                0x0010
-
-#define SPI_CONTROL_SPR(clk)      ((clk) & 0x0f)  /* Clock rate */
-
-#define ASIC3_PWM_0_Base                0x0500
-#define ASIC3_PWM_1_Base                0x0600
-#define ASIC3_PWM_TimeBase              0x0000
-#define ASIC3_PWM_PeriodTime            0x0004
-#define ASIC3_PWM_DutyTime              0x0008
-
-#define PWM_TIMEBASE_VALUE(x)    ((x)&0xf)   /* Low 4 bits sets time base */
-#define PWM_TIMEBASE_ENABLE     (1 << 4)   /* Enable clock */
-
-#define ASIC3_NUM_LEDS                  3
-#define ASIC3_LED_0_Base                0x0700
-#define ASIC3_LED_1_Base                0x0800
-#define ASIC3_LED_2_Base 		      0x0900
-#define ASIC3_LED_TimeBase              0x0000    /* R/W  7 bits */
-#define ASIC3_LED_PeriodTime            0x0004    /* R/W 12 bits */
-#define ASIC3_LED_DutyTime              0x0008    /* R/W 12 bits */
-#define ASIC3_LED_AutoStopCount         0x000c    /* R/W 16 bits */
-
-/* LED TimeBase bits - match ASIC2 */
-#define LED_TBS		0x0f /* Low 4 bits sets time base, max = 13 */
-			     /* Note: max = 5 on hx4700	*/
-			     /* 0: maximum time base */
-			     /* 1: maximum time base / 2 */
-			     /* n: maximum time base / 2^n */
-
-#define LED_EN		(1 << 4) /* LED ON/OFF 0:off, 1:on */
-#define LED_AUTOSTOP	(1 << 5) /* LED ON/OFF auto stop 0:disable, 1:enable */
-#define LED_ALWAYS	(1 << 6) /* LED Interrupt Mask 0:No mask, 1:mask */
-
-#define ASIC3_CLOCK_BASE	   0x0A00
-#define ASIC3_CLOCK_CDEX           0x00
-#define ASIC3_CLOCK_SEL            0x04
-
-#define CLOCK_CDEX_SOURCE       (1 << 0)  /* 2 bits */
-#define CLOCK_CDEX_SOURCE0      (1 << 0)
-#define CLOCK_CDEX_SOURCE1      (1 << 1)
-#define CLOCK_CDEX_SPI          (1 << 2)
-#define CLOCK_CDEX_OWM          (1 << 3)
-#define CLOCK_CDEX_PWM0         (1 << 4)
-#define CLOCK_CDEX_PWM1         (1 << 5)
-#define CLOCK_CDEX_LED0         (1 << 6)
-#define CLOCK_CDEX_LED1         (1 << 7)
-#define CLOCK_CDEX_LED2         (1 << 8)
-
-/* Clocks settings: 1 for 24.576 MHz, 0 for 12.288Mhz */
-#define CLOCK_CDEX_SD_HOST      (1 << 9)   /* R/W: SD host clock source */
-#define CLOCK_CDEX_SD_BUS       (1 << 10)  /* R/W: SD bus clock source ctrl */
-#define CLOCK_CDEX_SMBUS        (1 << 11)
-#define CLOCK_CDEX_CONTROL_CX   (1 << 12)
-
-#define CLOCK_CDEX_EX0          (1 << 13)  /* R/W: 32.768 kHz crystal */
-#define CLOCK_CDEX_EX1          (1 << 14)  /* R/W: 24.576 MHz crystal */
-
-#define CLOCK_SEL_SD_HCLK_SEL   (1 << 0)   /* R/W: SDIO host clock select */
-#define CLOCK_SEL_SD_BCLK_SEL   (1 << 1)   /* R/W: SDIO bus clock select */
-
-/* R/W: INT clock source control (32.768 kHz) */
-#define CLOCK_SEL_CX            (1 << 2)
-
-
-#define ASIC3_INTR_BASE		0x0B00
-
-#define ASIC3_INTR_INT_MASK       0x00  /* Interrupt mask control */
-#define ASIC3_INTR_P_INT_STAT     0x04  /* Peripheral interrupt status */
-#define ASIC3_INTR_INT_CPS        0x08  /* Interrupt timer clock pre-scale */
-#define ASIC3_INTR_INT_TBS        0x0c  /* Interrupt timer set */
-
-#define ASIC3_INTMASK_GINTMASK    (1 << 0)  /* Global INTs mask 1:enable */
-#define ASIC3_INTMASK_GINTEL      (1 << 1)  /* 1: rising edge, 0: hi level */
-#define ASIC3_INTMASK_MASK0       (1 << 2)
-#define ASIC3_INTMASK_MASK1       (1 << 3)
-#define ASIC3_INTMASK_MASK2       (1 << 4)
-#define ASIC3_INTMASK_MASK3       (1 << 5)
-#define ASIC3_INTMASK_MASK4       (1 << 6)
-#define ASIC3_INTMASK_MASK5       (1 << 7)
-
-#define ASIC3_INTR_PERIPHERAL_A   (1 << 0)
-#define ASIC3_INTR_PERIPHERAL_B   (1 << 1)
-#define ASIC3_INTR_PERIPHERAL_C   (1 << 2)
-#define ASIC3_INTR_PERIPHERAL_D   (1 << 3)
-#define ASIC3_INTR_LED0           (1 << 4)
-#define ASIC3_INTR_LED1           (1 << 5)
-#define ASIC3_INTR_LED2           (1 << 6)
-#define ASIC3_INTR_SPI            (1 << 7)
-#define ASIC3_INTR_SMBUS          (1 << 8)
-#define ASIC3_INTR_OWM            (1 << 9)
-
-#define ASIC3_INTR_CPS(x)         ((x)&0x0f)    /* 4 bits, max 14 */
-#define ASIC3_INTR_CPS_SET        (1 << 4)    /* Time base enable */
-
-
-/* Basic control of the SD ASIC */
-#define ASIC3_SDHWCTRL_BASE     0x0E00
-#define ASIC3_SDHWCTRL_SDCONF     0x00
-
-#define ASIC3_SDHWCTRL_SUSPEND    (1 << 0)  /* 1=suspend all SD operations */
-#define ASIC3_SDHWCTRL_CLKSEL     (1 << 1)  /* 1=SDICK, 0=HCLK */
-#define ASIC3_SDHWCTRL_PCLR       (1 << 2)  /* All registers of SDIO cleared */
-#define ASIC3_SDHWCTRL_LEVCD      (1 << 3)  /* SD card detection: 0:low */
-
-/* SD card write protection: 0=high */
-#define ASIC3_SDHWCTRL_LEVWP      (1 << 4)
-#define ASIC3_SDHWCTRL_SDLED      (1 << 5)  /* SD card LED signal 0=disable */
-
-/* SD card power supply ctrl 1=enable */
-#define ASIC3_SDHWCTRL_SDPWR      (1 << 6)
-
-#define ASIC3_EXTCF_BASE        0x1100
-
-#define ASIC3_EXTCF_SELECT        0x00
-#define ASIC3_EXTCF_RESET         0x04
-
-#define ASIC3_EXTCF_SMOD0	         (1 << 0)  /* slot number of mode 0 */
-#define ASIC3_EXTCF_SMOD1	         (1 << 1)  /* slot number of mode 1 */
-#define ASIC3_EXTCF_SMOD2	         (1 << 2)  /* slot number of mode 2 */
-#define ASIC3_EXTCF_OWM_EN	         (1 << 4)  /* enable onewire module */
-#define ASIC3_EXTCF_OWM_SMB	         (1 << 5)  /* OWM bus selection */
-#define ASIC3_EXTCF_OWM_RESET            (1 << 6)  /* ?? used by OWM and CF */
-#define ASIC3_EXTCF_CF0_SLEEP_MODE       (1 << 7)  /* CF0 sleep state */
-#define ASIC3_EXTCF_CF1_SLEEP_MODE       (1 << 8)  /* CF1 sleep state */
-#define ASIC3_EXTCF_CF0_PWAIT_EN         (1 << 10) /* CF0 PWAIT_n control */
-#define ASIC3_EXTCF_CF1_PWAIT_EN         (1 << 11) /* CF1 PWAIT_n control */
-#define ASIC3_EXTCF_CF0_BUF_EN           (1 << 12) /* CF0 buffer control */
-#define ASIC3_EXTCF_CF1_BUF_EN           (1 << 13) /* CF1 buffer control */
-#define ASIC3_EXTCF_SD_MEM_ENABLE        (1 << 14)
-#define ASIC3_EXTCF_CF_SLEEP             (1 << 15) /* CF sleep mode control */
-
-/*********************************************
- *  The Onewire interface (DS1WM) is handled
- *  by the ds1wm driver.
- *
- *********************************************/
-
-#define ASIC3_OWM_BASE		0xC00
-
-/*****************************************************************************
- *  The SD configuration registers are at a completely different location
- *  in memory.  They are divided into three sets of registers:
- *
- *  SD_CONFIG         Core configuration register
- *  SD_CTRL           Control registers for SD operations
- *  SDIO_CTRL         Control registers for SDIO operations
- *
- *****************************************************************************/
-#define ASIC3_SD_CONFIG_BASE	0x0400 /* Assumes 32 bit addressing */
-#define ASIC3_SD_CONFIG_SIZE	0x0200 /* Assumes 32 bit addressing */
-#define ASIC3_SD_CTRL_BASE	0x1000
-#define ASIC3_SDIO_CTRL_BASE	0x1200
-
-#define ASIC3_MAP_SIZE_32BIT	0x2000
-#define ASIC3_MAP_SIZE_16BIT	0x1000
-
-/* Functions needed by leds-asic3 */
-
-struct asic3;
-extern void asic3_write_register(struct asic3 *asic, unsigned int reg, u32 val);
-extern u32 asic3_read_register(struct asic3 *asic, unsigned int reg);
-
-#endif /* __ASIC3_H__ */
diff --git a/ANDROID_3.4.5/include/linux/mfd/core.h b/ANDROID_3.4.5/include/linux/mfd/core.h
deleted file mode 100644
index 4e76163d..00000000
--- a/ANDROID_3.4.5/include/linux/mfd/core.h
+++ /dev/null
@@ -1,100 +0,0 @@
-/*
- * drivers/mfd/mfd-core.h
- *
- * core MFD support
- * Copyright (c) 2006 Ian Molton
- * Copyright (c) 2007 Dmitry Baryshkov
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#ifndef MFD_CORE_H
-#define MFD_CORE_H
-
-#include <linux/platform_device.h>
-
-/*
- * This struct describes the MFD part ("cell").
- * After registration the copy of this structure will become the platform data
- * of the resulting platform_device
- */
-struct mfd_cell {
-	const char		*name;
-	int			id;
-
-	/* refcounting for multiple drivers to use a single cell */
-	atomic_t		*usage_count;
-	int			(*enable)(struct platform_device *dev);
-	int			(*disable)(struct platform_device *dev);
-
-	int			(*suspend)(struct platform_device *dev);
-	int			(*resume)(struct platform_device *dev);
-
-	/* platform data passed to the sub devices drivers */
-	void			*platform_data;
-	size_t			pdata_size;
-
-	/*
-	 * These resources can be specified relative to the parent device.
-	 * For accessing hardware you should use resources from the platform dev
-	 */
-	int			num_resources;
-	const struct resource	*resources;
-
-	/* don't check for resource conflicts */
-	bool			ignore_resource_conflicts;
-
-	/*
-	 * Disable runtime PM callbacks for this subdevice - see
-	 * pm_runtime_no_callbacks().
-	 */
-	bool			pm_runtime_no_callbacks;
-};
-
-/*
- * Convenience functions for clients using shared cells.  Refcounting
- * happens automatically, with the cell's enable/disable callbacks
- * being called only when a device is first being enabled or no other
- * clients are making use of it.
- */
-extern int mfd_cell_enable(struct platform_device *pdev);
-extern int mfd_cell_disable(struct platform_device *pdev);
-
-/*
- * "Clone" multiple platform devices for a single cell. This is to be used
- * for devices that have multiple users of a cell.  For example, if an mfd
- * driver wants the cell "foo" to be used by a GPIO driver, an MTD driver,
- * and a platform driver, the following bit of code would be use after first
- * calling mfd_add_devices():
- *
- * const char *fclones[] = { "foo-gpio", "foo-mtd" };
- * err = mfd_clone_cells("foo", fclones, ARRAY_SIZE(fclones));
- *
- * Each driver (MTD, GPIO, and platform driver) would then register
- * platform_drivers for "foo-mtd", "foo-gpio", and "foo", respectively.
- * The cell's .enable/.disable hooks should be used to deal with hardware
- * resource contention.
- */
-extern int mfd_clone_cell(const char *cell, const char **clones,
-		size_t n_clones);
-
-/*
- * Given a platform device that's been created by mfd_add_devices(), fetch
- * the mfd_cell that created it.
- */
-static inline const struct mfd_cell *mfd_get_cell(struct platform_device *pdev)
-{
-	return pdev->mfd_cell;
-}
-
-extern int mfd_add_devices(struct device *parent, int id,
-			   struct mfd_cell *cells, int n_devs,
-			   struct resource *mem_base,
-			   int irq_base);
-
-extern void mfd_remove_devices(struct device *parent);
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/mfd/da903x.h b/ANDROID_3.4.5/include/linux/mfd/da903x.h
deleted file mode 100644
index 0aa3a1a4..00000000
--- a/ANDROID_3.4.5/include/linux/mfd/da903x.h
+++ /dev/null
@@ -1,247 +0,0 @@
-#ifndef __LINUX_PMIC_DA903X_H
-#define __LINUX_PMIC_DA903X_H
-
-/* Unified sub device IDs for DA9030/DA9034/DA9035 */
-enum {
-	DA9030_ID_LED_1,
-	DA9030_ID_LED_2,
-	DA9030_ID_LED_3,
-	DA9030_ID_LED_4,
-	DA9030_ID_LED_PC,
-	DA9030_ID_VIBRA,
-	DA9030_ID_WLED,
-	DA9030_ID_BUCK1,
-	DA9030_ID_BUCK2,
-	DA9030_ID_LDO1,
-	DA9030_ID_LDO2,
-	DA9030_ID_LDO3,
-	DA9030_ID_LDO4,
-	DA9030_ID_LDO5,
-	DA9030_ID_LDO6,
-	DA9030_ID_LDO7,
-	DA9030_ID_LDO8,
-	DA9030_ID_LDO9,
-	DA9030_ID_LDO10,
-	DA9030_ID_LDO11,
-	DA9030_ID_LDO12,
-	DA9030_ID_LDO13,
-	DA9030_ID_LDO14,
-	DA9030_ID_LDO15,
-	DA9030_ID_LDO16,
-	DA9030_ID_LDO17,
-	DA9030_ID_LDO18,
-	DA9030_ID_LDO19,
-	DA9030_ID_LDO_INT,	/* LDO Internal */
-	DA9030_ID_BAT,		/* battery charger */
-
-	DA9034_ID_LED_1,
-	DA9034_ID_LED_2,
-	DA9034_ID_VIBRA,
-	DA9034_ID_WLED,
-	DA9034_ID_TOUCH,
-
-	DA9034_ID_BUCK1,
-	DA9034_ID_BUCK2,
-	DA9034_ID_LDO1,
-	DA9034_ID_LDO2,
-	DA9034_ID_LDO3,
-	DA9034_ID_LDO4,
-	DA9034_ID_LDO5,
-	DA9034_ID_LDO6,
-	DA9034_ID_LDO7,
-	DA9034_ID_LDO8,
-	DA9034_ID_LDO9,
-	DA9034_ID_LDO10,
-	DA9034_ID_LDO11,
-	DA9034_ID_LDO12,
-	DA9034_ID_LDO13,
-	DA9034_ID_LDO14,
-	DA9034_ID_LDO15,
-
-	DA9035_ID_BUCK3,
-};
-
-/*
- * DA9030/DA9034 LEDs sub-devices uses generic "struct led_info"
- * as the platform_data
- */
-
-/* DA9030 flags for "struct led_info"
- */
-#define DA9030_LED_RATE_ON	(0 << 5)
-#define DA9030_LED_RATE_052S	(1 << 5)
-#define DA9030_LED_DUTY_1_16	(0 << 3)
-#define DA9030_LED_DUTY_1_8	(1 << 3)
-#define DA9030_LED_DUTY_1_4	(2 << 3)
-#define DA9030_LED_DUTY_1_2	(3 << 3)
-
-#define DA9030_VIBRA_MODE_1P3V	(0 << 1)
-#define DA9030_VIBRA_MODE_2P7V	(1 << 1)
-#define DA9030_VIBRA_FREQ_1HZ	(0 << 2)
-#define DA9030_VIBRA_FREQ_2HZ	(1 << 2)
-#define DA9030_VIBRA_FREQ_4HZ	(2 << 2)
-#define DA9030_VIBRA_FREQ_8HZ	(3 << 2)
-#define DA9030_VIBRA_DUTY_ON	(0 << 4)
-#define DA9030_VIBRA_DUTY_75P	(1 << 4)
-#define DA9030_VIBRA_DUTY_50P	(2 << 4)
-#define DA9030_VIBRA_DUTY_25P	(3 << 4)
-
-/* DA9034 flags for "struct led_info" */
-#define DA9034_LED_RAMP		(1 << 7)
-
-/* DA9034 touch screen platform data */
-struct da9034_touch_pdata {
-	int	interval_ms;	/* sampling interval while pen down */
-	int	x_inverted;
-	int	y_inverted;
-};
-
-struct da9034_backlight_pdata {
-	int	output_current;	/* output current of WLED, from 0-31 (in mA) */
-};
-
-/* DA9030 battery charger data */
-struct power_supply_info;
-
-struct da9030_battery_info {
-	/* battery parameters */
-	struct power_supply_info *battery_info;
-
-	/* current and voltage to use for battery charging */
-	unsigned int charge_milliamp;
-	unsigned int charge_millivolt;
-
-	/* voltage thresholds (in millivolts) */
-	int vbat_low;
-	int vbat_crit;
-	int vbat_charge_start;
-	int vbat_charge_stop;
-	int vbat_charge_restart;
-
-	/* battery nominal minimal and maximal voltages in millivolts */
-	int vcharge_min;
-	int vcharge_max;
-
-	/* Temperature thresholds. These are DA9030 register values
-	   "as is" and should be measured for each battery type */
-	int tbat_low;
-	int tbat_high;
-	int tbat_restart;
-
-
-	/* battery monitor interval (seconds) */
-	unsigned int batmon_interval;
-
-	/* platform callbacks for battery low and critical events */
-	void (*battery_low)(void);
-	void (*battery_critical)(void);
-};
-
-struct da903x_subdev_info {
-	int		id;
-	const char	*name;
-	void		*platform_data;
-};
-
-struct da903x_platform_data {
-	int num_subdevs;
-	struct da903x_subdev_info *subdevs;
-};
-
-/* bit definitions for DA9030 events */
-#define DA9030_EVENT_ONKEY		(1 << 0)
-#define	DA9030_EVENT_PWREN		(1 << 1)
-#define	DA9030_EVENT_EXTON		(1 << 2)
-#define	DA9030_EVENT_CHDET		(1 << 3)
-#define	DA9030_EVENT_TBAT		(1 << 4)
-#define	DA9030_EVENT_VBATMON		(1 << 5)
-#define	DA9030_EVENT_VBATMON_TXON	(1 << 6)
-#define	DA9030_EVENT_CHIOVER		(1 << 7)
-#define	DA9030_EVENT_TCTO		(1 << 8)
-#define	DA9030_EVENT_CCTO		(1 << 9)
-#define	DA9030_EVENT_ADC_READY		(1 << 10)
-#define	DA9030_EVENT_VBUS_4P4		(1 << 11)
-#define	DA9030_EVENT_VBUS_4P0		(1 << 12)
-#define	DA9030_EVENT_SESS_VALID		(1 << 13)
-#define	DA9030_EVENT_SRP_DETECT		(1 << 14)
-#define	DA9030_EVENT_WATCHDOG		(1 << 15)
-#define	DA9030_EVENT_LDO15		(1 << 16)
-#define	DA9030_EVENT_LDO16		(1 << 17)
-#define	DA9030_EVENT_LDO17		(1 << 18)
-#define	DA9030_EVENT_LDO18		(1 << 19)
-#define	DA9030_EVENT_LDO19		(1 << 20)
-#define	DA9030_EVENT_BUCK2		(1 << 21)
-
-/* bit definitions for DA9034 events */
-#define DA9034_EVENT_ONKEY		(1 << 0)
-#define DA9034_EVENT_EXTON		(1 << 2)
-#define DA9034_EVENT_CHDET		(1 << 3)
-#define DA9034_EVENT_TBAT		(1 << 4)
-#define DA9034_EVENT_VBATMON		(1 << 5)
-#define DA9034_EVENT_REV_IOVER		(1 << 6)
-#define DA9034_EVENT_CH_IOVER		(1 << 7)
-#define DA9034_EVENT_CH_TCTO		(1 << 8)
-#define DA9034_EVENT_CH_CCTO		(1 << 9)
-#define DA9034_EVENT_USB_DEV		(1 << 10)
-#define DA9034_EVENT_OTGCP_IOVER	(1 << 11)
-#define DA9034_EVENT_VBUS_4P55		(1 << 12)
-#define DA9034_EVENT_VBUS_3P8		(1 << 13)
-#define DA9034_EVENT_SESS_1P8		(1 << 14)
-#define DA9034_EVENT_SRP_READY		(1 << 15)
-#define DA9034_EVENT_ADC_MAN		(1 << 16)
-#define DA9034_EVENT_ADC_AUTO4		(1 << 17)
-#define DA9034_EVENT_ADC_AUTO5		(1 << 18)
-#define DA9034_EVENT_ADC_AUTO6		(1 << 19)
-#define DA9034_EVENT_PEN_DOWN		(1 << 20)
-#define DA9034_EVENT_TSI_READY		(1 << 21)
-#define DA9034_EVENT_UART_TX		(1 << 22)
-#define DA9034_EVENT_UART_RX		(1 << 23)
-#define DA9034_EVENT_HEADSET		(1 << 25)
-#define DA9034_EVENT_HOOKSWITCH		(1 << 26)
-#define DA9034_EVENT_WATCHDOG		(1 << 27)
-
-extern int da903x_register_notifier(struct device *dev,
-		struct notifier_block *nb, unsigned int events);
-extern int da903x_unregister_notifier(struct device *dev,
-		struct notifier_block *nb, unsigned int events);
-
-/* Status Query Interface */
-#define DA9030_STATUS_ONKEY		(1 << 0)
-#define DA9030_STATUS_PWREN1		(1 << 1)
-#define DA9030_STATUS_EXTON		(1 << 2)
-#define DA9030_STATUS_CHDET		(1 << 3)
-#define DA9030_STATUS_TBAT		(1 << 4)
-#define DA9030_STATUS_VBATMON		(1 << 5)
-#define DA9030_STATUS_VBATMON_TXON	(1 << 6)
-#define DA9030_STATUS_MCLKDET		(1 << 7)
-
-#define DA9034_STATUS_ONKEY		(1 << 0)
-#define DA9034_STATUS_EXTON		(1 << 2)
-#define DA9034_STATUS_CHDET		(1 << 3)
-#define DA9034_STATUS_TBAT		(1 << 4)
-#define DA9034_STATUS_VBATMON		(1 << 5)
-#define DA9034_STATUS_PEN_DOWN		(1 << 6)
-#define DA9034_STATUS_MCLKDET		(1 << 7)
-#define DA9034_STATUS_USB_DEV		(1 << 8)
-#define DA9034_STATUS_HEADSET		(1 << 9)
-#define DA9034_STATUS_HOOKSWITCH	(1 << 10)
-#define DA9034_STATUS_REMCON		(1 << 11)
-#define DA9034_STATUS_VBUS_VALID_4P55	(1 << 12)
-#define DA9034_STATUS_VBUS_VALID_3P8	(1 << 13)
-#define DA9034_STATUS_SESS_VALID_1P8	(1 << 14)
-#define DA9034_STATUS_SRP_READY		(1 << 15)
-
-extern int da903x_query_status(struct device *dev, unsigned int status);
-
-
-/* NOTE: the functions below are not intended for use outside
- * of the DA903x sub-device drivers
- */
-extern int da903x_write(struct device *dev, int reg, uint8_t val);
-extern int da903x_writes(struct device *dev, int reg, int len, uint8_t *val);
-extern int da903x_read(struct device *dev, int reg, uint8_t *val);
-extern int da903x_reads(struct device *dev, int reg, int len, uint8_t *val);
-extern int da903x_update(struct device *dev, int reg, uint8_t val, uint8_t mask);
-extern int da903x_set_bits(struct device *dev, int reg, uint8_t bit_mask);
-extern int da903x_clr_bits(struct device *dev, int reg, uint8_t bit_mask);
-#endif /* __LINUX_PMIC_DA903X_H */
diff --git a/ANDROID_3.4.5/include/linux/mfd/da9052/da9052.h b/ANDROID_3.4.5/include/linux/mfd/da9052/da9052.h
deleted file mode 100644
index 7ffbd6e9..00000000
--- a/ANDROID_3.4.5/include/linux/mfd/da9052/da9052.h
+++ /dev/null
@@ -1,129 +0,0 @@
-/*
- * da9052 declarations for DA9052 PMICs.
- *
- * Copyright(c) 2011 Dialog Semiconductor Ltd.
- *
- * Author: David Dajun Chen <dchen@diasemi.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-#ifndef __MFD_DA9052_DA9052_H
-#define __MFD_DA9052_DA9052_H
-
-#include <linux/interrupt.h>
-#include <linux/regmap.h>
-#include <linux/slab.h>
-#include <linux/completion.h>
-#include <linux/list.h>
-#include <linux/mfd/core.h>
-
-#include <linux/mfd/da9052/reg.h>
-
-#define DA9052_IRQ_DCIN	0
-#define DA9052_IRQ_VBUS	1
-#define DA9052_IRQ_DCINREM	2
-#define DA9052_IRQ_VBUSREM	3
-#define DA9052_IRQ_VDDLOW	4
-#define DA9052_IRQ_ALARM	5
-#define DA9052_IRQ_SEQRDY	6
-#define DA9052_IRQ_COMP1V2	7
-#define DA9052_IRQ_NONKEY	8
-#define DA9052_IRQ_IDFLOAT	9
-#define DA9052_IRQ_IDGND	10
-#define DA9052_IRQ_CHGEND	11
-#define DA9052_IRQ_TBAT	12
-#define DA9052_IRQ_ADC_EOM	13
-#define DA9052_IRQ_PENDOWN	14
-#define DA9052_IRQ_TSIREADY	15
-#define DA9052_IRQ_GPI0	16
-#define DA9052_IRQ_GPI1	17
-#define DA9052_IRQ_GPI2	18
-#define DA9052_IRQ_GPI3	19
-#define DA9052_IRQ_GPI4	20
-#define DA9052_IRQ_GPI5	21
-#define DA9052_IRQ_GPI6	22
-#define DA9052_IRQ_GPI7	23
-#define DA9052_IRQ_GPI8	24
-#define DA9052_IRQ_GPI9	25
-#define DA9052_IRQ_GPI10	26
-#define DA9052_IRQ_GPI11	27
-#define DA9052_IRQ_GPI12	28
-#define DA9052_IRQ_GPI13	29
-#define DA9052_IRQ_GPI14	30
-#define DA9052_IRQ_GPI15	31
-
-enum da9052_chip_id {
-	DA9052,
-	DA9053_AA,
-	DA9053_BA,
-	DA9053_BB,
-};
-
-struct da9052_pdata;
-
-struct da9052 {
-	struct device *dev;
-	struct regmap *regmap;
-
-	int irq_base;
-	u8 chip_id;
-
-	int chip_irq;
-};
-
-/* Device I/O API */
-static inline int da9052_reg_read(struct da9052 *da9052, unsigned char reg)
-{
-	int val, ret;
-
-	ret = regmap_read(da9052->regmap, reg, &val);
-	if (ret < 0)
-		return ret;
-	return val;
-}
-
-static inline int da9052_reg_write(struct da9052 *da9052, unsigned char reg,
-				    unsigned char val)
-{
-	return regmap_write(da9052->regmap, reg, val);
-}
-
-static inline int da9052_group_read(struct da9052 *da9052, unsigned char reg,
-				     unsigned reg_cnt, unsigned char *val)
-{
-	return regmap_bulk_read(da9052->regmap, reg, val, reg_cnt);
-}
-
-static inline int da9052_group_write(struct da9052 *da9052, unsigned char reg,
-				      unsigned reg_cnt, unsigned char *val)
-{
-	return regmap_raw_write(da9052->regmap, reg, val, reg_cnt);
-}
-
-static inline int da9052_reg_update(struct da9052 *da9052, unsigned char reg,
-				     unsigned char bit_mask,
-				     unsigned char reg_val)
-{
-	return regmap_update_bits(da9052->regmap, reg, bit_mask, reg_val);
-}
-
-int da9052_device_init(struct da9052 *da9052, u8 chip_id);
-void da9052_device_exit(struct da9052 *da9052);
-
-extern struct regmap_config da9052_regmap_config;
-
-#endif /* __MFD_DA9052_DA9052_H */
diff --git a/ANDROID_3.4.5/include/linux/mfd/da9052/pdata.h b/ANDROID_3.4.5/include/linux/mfd/da9052/pdata.h
deleted file mode 100644
index 62c5c3c2..00000000
--- a/ANDROID_3.4.5/include/linux/mfd/da9052/pdata.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- * Platform data declarations for DA9052 PMICs.
- *
- * Copyright(c) 2011 Dialog Semiconductor Ltd.
- *
- * Author: David Dajun Chen <dchen@diasemi.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-#ifndef __MFD_DA9052_PDATA_H__
-#define __MFD_DA9052_PDATA_H__
-
-#define DA9052_MAX_REGULATORS	14
-
-struct da9052;
-
-struct da9052_pdata {
-	struct led_platform_data *pled;
-	int (*init) (struct da9052 *da9052);
-	int irq_base;
-	int gpio_base;
-	int use_for_apm;
-	struct regulator_init_data *regulators[DA9052_MAX_REGULATORS];
-};
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/mfd/da9052/reg.h b/ANDROID_3.4.5/include/linux/mfd/da9052/reg.h
deleted file mode 100644
index b97f7309..00000000
--- a/ANDROID_3.4.5/include/linux/mfd/da9052/reg.h
+++ /dev/null
@@ -1,749 +0,0 @@
-/*
- * Register declarations for DA9052 PMICs.
- *
- * Copyright(c) 2011 Dialog Semiconductor Ltd.
- *
- * Author: David Dajun Chen <dchen@diasemi.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-#ifndef __LINUX_MFD_DA9052_REG_H
-#define __LINUX_MFD_DA9052_REG_H
-
-/* PAGE REGISTERS */
-#define DA9052_PAGE0_CON_REG		0
-#define DA9052_PAGE1_CON_REG		128
-
-/* STATUS REGISTERS */
-#define DA9052_STATUS_A_REG		1
-#define DA9052_STATUS_B_REG		2
-#define DA9052_STATUS_C_REG		3
-#define DA9052_STATUS_D_REG		4
-
-/* EVENT REGISTERS */
-#define DA9052_EVENT_A_REG		5
-#define DA9052_EVENT_B_REG		6
-#define DA9052_EVENT_C_REG		7
-#define DA9052_EVENT_D_REG		8
-#define DA9052_FAULTLOG_REG		9
-
-/* IRQ REGISTERS */
-#define DA9052_IRQ_MASK_A_REG		10
-#define DA9052_IRQ_MASK_B_REG		11
-#define DA9052_IRQ_MASK_C_REG		12
-#define DA9052_IRQ_MASK_D_REG		13
-
-/* CONTROL REGISTERS */
-#define DA9052_CONTROL_A_REG		14
-#define DA9052_CONTROL_B_REG		15
-#define DA9052_CONTROL_C_REG		16
-#define DA9052_CONTROL_D_REG		17
-
-#define DA9052_PDDIS_REG		18
-#define DA9052_INTERFACE_REG		19
-#define DA9052_RESET_REG		20
-
-/* GPIO REGISTERS */
-#define DA9052_GPIO_0_1_REG		21
-#define DA9052_GPIO_2_3_REG		22
-#define DA9052_GPIO_4_5_REG		23
-#define DA9052_GPIO_6_7_REG		24
-#define DA9052_GPIO_14_15_REG		28
-
-/* POWER SEQUENCER CONTROL REGISTERS */
-#define DA9052_ID_0_1_REG		29
-#define DA9052_ID_2_3_REG		30
-#define DA9052_ID_4_5_REG		31
-#define DA9052_ID_6_7_REG		32
-#define DA9052_ID_8_9_REG		33
-#define DA9052_ID_10_11_REG		34
-#define DA9052_ID_12_13_REG		35
-#define DA9052_ID_14_15_REG		36
-#define DA9052_ID_16_17_REG		37
-#define DA9052_ID_18_19_REG		38
-#define DA9052_ID_20_21_REG		39
-#define DA9052_SEQ_STATUS_REG		40
-#define DA9052_SEQ_A_REG		41
-#define DA9052_SEQ_B_REG		42
-#define DA9052_SEQ_TIMER_REG		43
-
-/* LDO AND BUCK REGISTERS */
-#define DA9052_BUCKA_REG		44
-#define DA9052_BUCKB_REG		45
-#define DA9052_BUCKCORE_REG		46
-#define DA9052_BUCKPRO_REG		47
-#define DA9052_BUCKMEM_REG		48
-#define DA9052_BUCKPERI_REG		49
-#define DA9052_LDO1_REG		50
-#define DA9052_LDO2_REG		51
-#define DA9052_LDO3_REG		52
-#define DA9052_LDO4_REG		53
-#define DA9052_LDO5_REG		54
-#define DA9052_LDO6_REG		55
-#define DA9052_LDO7_REG		56
-#define DA9052_LDO8_REG		57
-#define DA9052_LDO9_REG		58
-#define DA9052_LDO10_REG		59
-#define DA9052_SUPPLY_REG		60
-#define DA9052_PULLDOWN_REG		61
-#define DA9052_CHGBUCK_REG		62
-#define DA9052_WAITCONT_REG		63
-#define DA9052_ISET_REG		64
-#define DA9052_BATCHG_REG		65
-
-/* BATTERY CONTROL REGISTRS */
-#define DA9052_CHG_CONT_REG		66
-#define DA9052_INPUT_CONT_REG		67
-#define DA9052_CHG_TIME_REG		68
-#define DA9052_BBAT_CONT_REG		69
-
-/* LED CONTROL REGISTERS */
-#define DA9052_BOOST_REG		70
-#define DA9052_LED_CONT_REG		71
-#define DA9052_LEDMIN123_REG		72
-#define DA9052_LED1_CONF_REG		73
-#define DA9052_LED2_CONF_REG		74
-#define DA9052_LED3_CONF_REG		75
-#define DA9052_LED1CONT_REG		76
-#define DA9052_LED2CONT_REG		77
-#define DA9052_LED3CONT_REG		78
-#define DA9052_LED_CONT_4_REG		79
-#define DA9052_LED_CONT_5_REG		80
-
-/* ADC CONTROL REGISTERS */
-#define DA9052_ADC_MAN_REG		81
-#define DA9052_ADC_CONT_REG		82
-#define DA9052_ADC_RES_L_REG		83
-#define DA9052_ADC_RES_H_REG		84
-#define DA9052_VDD_RES_REG		85
-#define DA9052_VDD_MON_REG		86
-
-#define DA9052_ICHG_AV_REG		87
-#define DA9052_ICHG_THD_REG		88
-#define DA9052_ICHG_END_REG		89
-#define DA9052_TBAT_RES_REG		90
-#define DA9052_TBAT_HIGHP_REG		91
-#define DA9052_TBAT_HIGHN_REG		92
-#define DA9052_TBAT_LOW_REG		93
-#define DA9052_T_OFFSET_REG		94
-
-#define DA9052_ADCIN4_RES_REG		95
-#define DA9052_AUTO4_HIGH_REG		96
-#define DA9052_AUTO4_LOW_REG		97
-#define DA9052_ADCIN5_RES_REG		98
-#define DA9052_AUTO5_HIGH_REG		99
-#define DA9052_AUTO5_LOW_REG		100
-#define DA9052_ADCIN6_RES_REG		101
-#define DA9052_AUTO6_HIGH_REG		102
-#define DA9052_AUTO6_LOW_REG		103
-
-#define DA9052_TJUNC_RES_REG		104
-
-/* TSI CONTROL REGISTERS */
-#define DA9052_TSI_CONT_A_REG		105
-#define DA9052_TSI_CONT_B_REG		106
-#define DA9052_TSI_X_MSB_REG		107
-#define DA9052_TSI_Y_MSB_REG		108
-#define DA9052_TSI_LSB_REG		109
-#define DA9052_TSI_Z_MSB_REG		110
-
-/* RTC COUNT REGISTERS */
-#define DA9052_COUNT_S_REG		111
-#define DA9052_COUNT_MI_REG		112
-#define DA9052_COUNT_H_REG		113
-#define DA9052_COUNT_D_REG		114
-#define DA9052_COUNT_MO_REG		115
-#define DA9052_COUNT_Y_REG		116
-
-/* RTC CONTROL REGISTERS */
-#define DA9052_ALARM_MI_REG		117
-#define DA9052_ALARM_H_REG		118
-#define DA9052_ALARM_D_REG		119
-#define DA9052_ALARM_MO_REG		120
-#define DA9052_ALARM_Y_REG		121
-#define DA9052_SECOND_A_REG		122
-#define DA9052_SECOND_B_REG		123
-#define DA9052_SECOND_C_REG		124
-#define DA9052_SECOND_D_REG		125
-
-/* PAGE CONFIGURATION BIT */
-#define DA9052_PAGE_CONF		0X80
-
-/* STATUS REGISTER A BITS */
-#define DA9052_STATUSA_VDATDET		0X80
-#define DA9052_STATUSA_VBUSSEL		0X40
-#define DA9052_STATUSA_DCINSEL		0X20
-#define DA9052_STATUSA_VBUSDET		0X10
-#define DA9052_STATUSA_DCINDET		0X08
-#define DA9052_STATUSA_IDGND		0X04
-#define DA9052_STATUSA_IDFLOAT		0X02
-#define DA9052_STATUSA_NONKEY		0X01
-
-/* STATUS REGISTER B BITS */
-#define DA9052_STATUSB_COMPDET		0X80
-#define DA9052_STATUSB_SEQUENCING	0X40
-#define DA9052_STATUSB_GPFB2		0X20
-#define DA9052_STATUSB_CHGTO		0X10
-#define DA9052_STATUSB_CHGEND		0X08
-#define DA9052_STATUSB_CHGLIM		0X04
-#define DA9052_STATUSB_CHGPRE		0X02
-#define DA9052_STATUSB_CHGATT		0X01
-
-/* STATUS REGISTER C BITS */
-#define DA9052_STATUSC_GPI7		0X80
-#define DA9052_STATUSC_GPI6		0X40
-#define DA9052_STATUSC_GPI5		0X20
-#define DA9052_STATUSC_GPI4		0X10
-#define DA9052_STATUSC_GPI3		0X08
-#define DA9052_STATUSC_GPI2		0X04
-#define DA9052_STATUSC_GPI1		0X02
-#define DA9052_STATUSC_GPI0		0X01
-
-/* STATUS REGISTER D BITS */
-#define DA9052_STATUSD_GPI15		0X80
-#define DA9052_STATUSD_GPI14		0X40
-#define DA9052_STATUSD_GPI13		0X20
-#define DA9052_STATUSD_GPI12		0X10
-#define DA9052_STATUSD_GPI11		0X08
-#define DA9052_STATUSD_GPI10		0X04
-#define DA9052_STATUSD_GPI9		0X02
-#define DA9052_STATUSD_GPI8		0X01
-
-/* EVENT REGISTER A BITS */
-#define DA9052_EVENTA_ECOMP1V2		0X80
-#define DA9052_EVENTA_ESEQRDY		0X40
-#define DA9052_EVENTA_EALRAM		0X20
-#define DA9052_EVENTA_EVDDLOW		0X10
-#define DA9052_EVENTA_EVBUSREM		0X08
-#define DA9052_EVENTA_EDCINREM		0X04
-#define DA9052_EVENTA_EVBUSDET		0X02
-#define DA9052_EVENTA_EDCINDET		0X01
-
-/* EVENT REGISTER B BITS */
-#define DA9052_EVENTB_ETSIREADY	0X80
-#define DA9052_EVENTB_EPENDOWN		0X40
-#define DA9052_EVENTB_EADCEOM		0X20
-#define DA9052_EVENTB_ETBAT		0X10
-#define DA9052_EVENTB_ECHGEND		0X08
-#define DA9052_EVENTB_EIDGND		0X04
-#define DA9052_EVENTB_EIDFLOAT		0X02
-#define DA9052_EVENTB_ENONKEY		0X01
-
-/* EVENT REGISTER C BITS */
-#define DA9052_EVENTC_EGPI7		0X80
-#define DA9052_EVENTC_EGPI6		0X40
-#define DA9052_EVENTC_EGPI5		0X20
-#define DA9052_EVENTC_EGPI4		0X10
-#define DA9052_EVENTC_EGPI3		0X08
-#define DA9052_EVENTC_EGPI2		0X04
-#define DA9052_EVENTC_EGPI1		0X02
-#define DA9052_EVENTC_EGPI0		0X01
-
-/* EVENT REGISTER D BITS */
-#define DA9052_EVENTD_EGPI15		0X80
-#define DA9052_EVENTD_EGPI14		0X40
-#define DA9052_EVENTD_EGPI13		0X20
-#define DA9052_EVENTD_EGPI12		0X10
-#define DA9052_EVENTD_EGPI11		0X08
-#define DA9052_EVENTD_EGPI10		0X04
-#define DA9052_EVENTD_EGPI9		0X02
-#define DA9052_EVENTD_EGPI8		0X01
-
-/* IRQ MASK REGISTERS BITS */
-#define DA9052_M_NONKEY		0X0100
-
-/* TSI EVENT REGISTERS BITS */
-#define DA9052_E_PEN_DOWN		0X4000
-#define DA9052_E_TSI_READY		0X8000
-
-/* FAULT LOG REGISTER BITS */
-#define DA9052_FAULTLOG_WAITSET	0X80
-#define DA9052_FAULTLOG_NSDSET		0X40
-#define DA9052_FAULTLOG_KEYSHUT	0X20
-#define DA9052_FAULTLOG_TEMPOVER	0X08
-#define DA9052_FAULTLOG_VDDSTART	0X04
-#define DA9052_FAULTLOG_VDDFAULT	0X02
-#define DA9052_FAULTLOG_TWDERROR	0X01
-
-/* CONTROL REGISTER A BITS */
-#define DA9052_CONTROLA_GPIV		0X80
-#define DA9052_CONTROLA_PMOTYPE	0X20
-#define DA9052_CONTROLA_PMOV		0X10
-#define DA9052_CONTROLA_PMIV		0X08
-#define DA9052_CONTROLA_PMIFV		0X08
-#define DA9052_CONTROLA_PWR1EN		0X04
-#define DA9052_CONTROLA_PWREN		0X02
-#define DA9052_CONTROLA_SYSEN		0X01
-
-/* CONTROL REGISTER B BITS */
-#define DA9052_CONTROLB_SHUTDOWN	0X80
-#define DA9052_CONTROLB_DEEPSLEEP	0X40
-#define DA9052_CONTROL_B_WRITEMODE	0X20
-#define DA9052_CONTROLB_BBATEN		0X10
-#define DA9052_CONTROLB_OTPREADEN	0X08
-#define DA9052_CONTROLB_AUTOBOOT	0X04
-#define DA9052_CONTROLB_ACTDIODE	0X02
-#define DA9052_CONTROLB_BUCKMERGE	0X01
-
-/* CONTROL REGISTER C BITS */
-#define DA9052_CONTROLC_BLINKDUR	0X80
-#define DA9052_CONTROLC_BLINKFRQ	0X60
-#define DA9052_CONTROLC_DEBOUNCING	0X1C
-#define DA9052_CONTROLC_PMFB2PIN	0X02
-#define DA9052_CONTROLC_PMFB1PIN	0X01
-
-/* CONTROL REGISTER D BITS */
-#define DA9052_CONTROLD_WATCHDOG	0X80
-#define DA9052_CONTROLD_ACCDETEN	0X40
-#define DA9052_CONTROLD_GPI1415SD	0X20
-#define DA9052_CONTROLD_NONKEYSD	0X10
-#define DA9052_CONTROLD_KEEPACTEN	0X08
-#define DA9052_CONTROLD_TWDSCALE	0X07
-
-/* POWER DOWN DISABLE REGISTER BITS */
-#define DA9052_PDDIS_PMCONTPD		0X80
-#define DA9052_PDDIS_OUT32KPD		0X40
-#define DA9052_PDDIS_CHGBBATPD		0X20
-#define DA9052_PDDIS_CHGPD		0X10
-#define DA9052_PDDIS_HS2WIREPD		0X08
-#define DA9052_PDDIS_PMIFPD		0X04
-#define DA9052_PDDIS_GPADCPD		0X02
-#define DA9052_PDDIS_GPIOPD		0X01
-
-/* CONTROL REGISTER D BITS */
-#define DA9052_INTERFACE_IFBASEADDR	0XE0
-#define DA9052_INTERFACE_NCSPOL	0X10
-#define DA9052_INTERFACE_RWPOL		0X08
-#define DA9052_INTERFACE_CPHA		0X04
-#define DA9052_INTERFACE_CPOL		0X02
-#define DA9052_INTERFACE_IFTYPE	0X01
-
-/* CONTROL REGISTER D BITS */
-#define DA9052_RESET_RESETEVENT	0XC0
-#define DA9052_RESET_RESETTIMER	0X3F
-
-/* GPIO REGISTERS */
-/* GPIO CONTROL REGISTER BITS */
-#define DA9052_GPIO_EVEN_PORT_PIN	0X03
-#define DA9052_GPIO_EVEN_PORT_TYPE	0X04
-#define DA9052_GPIO_EVEN_PORT_MODE	0X08
-
-#define DA9052_GPIO_ODD_PORT_PIN	0X30
-#define DA9052_GPIO_ODD_PORT_TYPE	0X40
-#define DA9052_GPIO_ODD_PORT_MODE	0X80
-
-/*POWER SEQUENCER REGISTER BITS */
-/* SEQ CONTROL REGISTER BITS FOR ID 0 AND 1 */
-#define DA9052_ID01_LDO1STEP		0XF0
-#define DA9052_ID01_SYSPRE		0X04
-#define DA9052_ID01_DEFSUPPLY		0X02
-#define DA9052_ID01_NRESMODE		0X01
-
-/* SEQ CONTROL REGISTER BITS FOR ID 2 AND 3 */
-#define DA9052_ID23_LDO3STEP		0XF0
-#define DA9052_ID23_LDO2STEP		0X0F
-
-/* SEQ CONTROL REGISTER BITS FOR ID 4 AND 5 */
-#define DA9052_ID45_LDO5STEP		0XF0
-#define DA9052_ID45_LDO4STEP		0X0F
-
-/* SEQ CONTROL REGISTER BITS FOR ID 6 AND 7 */
-#define DA9052_ID67_LDO7STEP		0XF0
-#define DA9052_ID67_LDO6STEP		0X0F
-
-/* SEQ CONTROL REGISTER BITS FOR ID 8 AND 9 */
-#define DA9052_ID89_LDO9STEP		0XF0
-#define DA9052_ID89_LDO8STEP		0X0F
-
-/* SEQ CONTROL REGISTER BITS FOR ID 10 AND 11 */
-#define DA9052_ID1011_PDDISSTEP	0XF0
-#define DA9052_ID1011_LDO10STEP	0X0F
-
-/* SEQ CONTROL REGISTER BITS FOR ID 12 AND 13 */
-#define DA9052_ID1213_VMEMSWSTEP	0XF0
-#define DA9052_ID1213_VPERISWSTEP	0X0F
-
-/* SEQ CONTROL REGISTER BITS FOR ID 14 AND 15 */
-#define DA9052_ID1415_BUCKPROSTEP	0XF0
-#define DA9052_ID1415_BUCKCORESTEP	0X0F
-
-/* SEQ CONTROL REGISTER BITS FOR ID 16 AND 17 */
-#define DA9052_ID1617_BUCKPERISTEP	0XF0
-#define DA9052_ID1617_BUCKMEMSTEP	0X0F
-
-/* SEQ CONTROL REGISTER BITS FOR ID 18 AND 19 */
-#define DA9052_ID1819_GPRISE2STEP	0XF0
-#define DA9052_ID1819_GPRISE1STEP	0X0F
-
-/* SEQ CONTROL REGISTER BITS FOR ID 20 AND 21 */
-#define DA9052_ID2021_GPFALL2STEP	0XF0
-#define DA9052_ID2021_GPFALL1STEP	0X0F
-
-/* POWER SEQ STATUS REGISTER BITS */
-#define DA9052_SEQSTATUS_SEQPOINTER	0XF0
-#define DA9052_SEQSTATUS_WAITSTEP	0X0F
-
-/* POWER SEQ A REGISTER BITS */
-#define DA9052_SEQA_POWEREND		0XF0
-#define DA9052_SEQA_SYSTEMEND		0X0F
-
-/* POWER SEQ B REGISTER BITS */
-#define DA9052_SEQB_PARTDOWN		0XF0
-#define DA9052_SEQB_MAXCOUNT		0X0F
-
-/* POWER SEQ TIMER REGISTER BITS */
-#define DA9052_SEQTIMER_SEQDUMMY	0XF0
-#define DA9052_SEQTIMER_SEQTIME	0X0F
-
-/*POWER SUPPLY CONTROL REGISTER BITS */
-/* BUCK REGISTER A BITS */
-#define DA9052_BUCKA_BPROILIM		0XC0
-#define DA9052_BUCKA_BPROMODE		0X30
-#define DA9052_BUCKA_BCOREILIM		0X0C
-#define DA9052_BUCKA_BCOREMODE		0X03
-
-/* BUCK REGISTER B BITS */
-#define DA9052_BUCKB_BERIILIM		0XC0
-#define DA9052_BUCKB_BPERIMODE		0X30
-#define DA9052_BUCKB_BMEMILIM		0X0C
-#define DA9052_BUCKB_BMEMMODE		0X03
-
-/* BUCKCORE REGISTER BITS */
-#define DA9052_BUCKCORE_BCORECONF	0X80
-#define DA9052_BUCKCORE_BCOREEN	0X40
-#define DA9052_BUCKCORE_VBCORE		0X3F
-
-/* BUCKPRO REGISTER BITS */
-#define DA9052_BUCKPRO_BPROCONF	0X80
-#define DA9052_BUCKPRO_BPROEN		0X40
-#define DA9052_BUCKPRO_VBPRO		0X3F
-
-/* BUCKMEM REGISTER BITS */
-#define DA9052_BUCKMEM_BMEMCONF	0X80
-#define DA9052_BUCKMEM_BMEMEN		0X40
-#define DA9052_BUCKMEM_VBMEM		0X3F
-
-/* BUCKPERI REGISTER BITS */
-#define DA9052_BUCKPERI_BPERICONF	0X80
-#define DA9052_BUCKPERI_BPERIEN	0X40
-#define DA9052_BUCKPERI_BPERIHS	0X20
-#define DA9052_BUCKPERI_VBPERI		0X1F
-
-/* LDO1 REGISTER BITS */
-#define DA9052_LDO1_LDO1CONF		0X80
-#define DA9052_LDO1_LDO1EN		0X40
-#define DA9052_LDO1_VLDO1		0X1F
-
-/* LDO2 REGISTER BITS */
-#define DA9052_LDO2_LDO2CONF		0X80
-#define DA9052_LDO2_LDO2EN		0X40
-#define DA9052_LDO2_VLDO2		0X3F
-
-/* LDO3 REGISTER BITS */
-#define DA9052_LDO3_LDO3CONF		0X80
-#define DA9052_LDO3_LDO3EN		0X40
-#define DA9052_LDO3_VLDO3		0X3F
-
-/* LDO4 REGISTER BITS */
-#define DA9052_LDO4_LDO4CONF		0X80
-#define DA9052_LDO4_LDO4EN		0X40
-#define DA9052_LDO4_VLDO4		0X3F
-
-/* LDO5 REGISTER BITS */
-#define DA9052_LDO5_LDO5CONF		0X80
-#define DA9052_LDO5_LDO5EN		0X40
-#define DA9052_LDO5_VLDO5		0X3F
-
-/* LDO6 REGISTER BITS */
-#define DA9052_LDO6_LDO6CONF		0X80
-#define DA9052_LDO6_LDO6EN		0X40
-#define DA9052_LDO6_VLDO6		0X3F
-
-/* LDO7 REGISTER BITS */
-#define DA9052_LDO7_LDO7CONF		0X80
-#define DA9052_LDO7_LDO7EN		0X40
-#define DA9052_LDO7_VLDO7		0X3F
-
-/* LDO8 REGISTER BITS */
-#define DA9052_LDO8_LDO8CONF		0X80
-#define DA9052_LDO8_LDO8EN		0X40
-#define DA9052_LDO8_VLDO8		0X3F
-
-/* LDO9 REGISTER BITS */
-#define DA9052_LDO9_LDO9CONF		0X80
-#define DA9052_LDO9_LDO9EN		0X40
-#define DA9052_LDO9_VLDO9		0X3F
-
-/* LDO10 REGISTER BITS */
-#define DA9052_LDO10_LDO10CONF		0X80
-#define DA9052_LDO10_LDO10EN		0X40
-#define DA9052_LDO10_VLDO10		0X3F
-
-/* SUPPLY REGISTER BITS */
-#define DA9052_SUPPLY_VLOCK		0X80
-#define DA9052_SUPPLY_VMEMSWEN		0X40
-#define DA9052_SUPPLY_VPERISWEN	0X20
-#define DA9052_SUPPLY_VLDO3GO		0X10
-#define DA9052_SUPPLY_VLDO2GO		0X08
-#define DA9052_SUPPLY_VBMEMGO		0X04
-#define DA9052_SUPPLY_VBPROGO		0X02
-#define DA9052_SUPPLY_VBCOREGO		0X01
-
-/* PULLDOWN REGISTER BITS */
-#define DA9052_PULLDOWN_LDO5PDDIS	0X20
-#define DA9052_PULLDOWN_LDO2PDDIS	0X10
-#define DA9052_PULLDOWN_LDO1PDDIS	0X08
-#define DA9052_PULLDOWN_MEMPDDIS	0X04
-#define DA9052_PULLDOWN_PROPDDIS	0X02
-#define DA9052_PULLDOWN_COREPDDIS	0X01
-
-/* BAT CHARGER REGISTER BITS */
-/* CHARGER BUCK REGISTER BITS */
-#define DA9052_CHGBUCK_CHGTEMP		0X80
-#define DA9052_CHGBUCK_CHGUSBILIM	0X40
-#define DA9052_CHGBUCK_CHGBUCKLP	0X20
-#define DA9052_CHGBUCK_CHGBUCKEN	0X10
-#define DA9052_CHGBUCK_ISETBUCK	0X0F
-
-/* WAIT COUNTER REGISTER BITS */
-#define DA9052_WAITCONT_WAITDIR	0X80
-#define DA9052_WAITCONT_RTCCLOCK	0X40
-#define DA9052_WAITCONT_WAITMODE	0X20
-#define DA9052_WAITCONT_EN32KOUT	0X10
-#define DA9052_WAITCONT_DELAYTIME	0X0F
-
-/* ISET CONTROL REGISTER BITS */
-#define DA9052_ISET_ISETDCIN		0XF0
-#define DA9052_ISET_ISETVBUS		0X0F
-
-/* BATTERY CHARGER CONTROL REGISTER BITS */
-#define DA9052_BATCHG_ICHGPRE		0XC0
-#define DA9052_BATCHG_ICHGBAT		0X3F
-
-/* CHARGER COUNTER REGISTER BITS */
-#define DA9052_CHG_CONT_VCHG_BAT	0XF8
-#define DA9052_CHG_CONT_TCTR		0X07
-
-/* INPUT CONTROL REGISTER BITS */
-#define DA9052_INPUT_CONT_TCTR_MODE	0X80
-#define DA9052_INPUT_CONT_VBUS_SUSP	0X10
-#define DA9052_INPUT_CONT_DCIN_SUSP	0X08
-
-/* CHARGING TIME REGISTER BITS */
-#define DA9052_CHGTIME_CHGTIME		0XFF
-
-/* BACKUP BATTERY CONTROL REGISTER BITS */
-#define DA9052_BBATCONT_BCHARGERISET	0XF0
-#define DA9052_BBATCONT_BCHARGERVSET	0X0F
-
-/* LED REGISTERS BITS */
-/* LED BOOST REGISTER BITS */
-#define DA9052_BOOST_EBFAULT		0X80
-#define DA9052_BOOST_MBFAULT		0X40
-#define DA9052_BOOST_BOOSTFRQ		0X20
-#define DA9052_BOOST_BOOSTILIM		0X10
-#define DA9052_BOOST_LED3INEN		0X08
-#define DA9052_BOOST_LED2INEN		0X04
-#define DA9052_BOOST_LED1INEN		0X02
-#define DA9052_BOOST_BOOSTEN		0X01
-
-/* LED CONTROL REGISTER BITS */
-#define DA9052_LEDCONT_SELLEDMODE	0X80
-#define DA9052_LEDCONT_LED3ICONT	0X40
-#define DA9052_LEDCONT_LED3RAMP	0X20
-#define DA9052_LEDCONT_LED3EN		0X10
-#define DA9052_LEDCONT_LED2RAMP	0X08
-#define DA9052_LEDCONT_LED2EN		0X04
-#define DA9052_LEDCONT_LED1RAMP	0X02
-#define DA9052_LEDCONT_LED1EN		0X01
-
-/* LEDMIN123 REGISTER BIT */
-#define DA9052_LEDMIN123_LEDMINCURRENT	0XFF
-
-/* LED1CONF REGISTER BIT */
-#define DA9052_LED1CONF_LED1CURRENT	0XFF
-
-/* LED2CONF REGISTER BIT */
-#define DA9052_LED2CONF_LED2CURRENT	0XFF
-
-/* LED3CONF REGISTER BIT */
-#define DA9052_LED3CONF_LED3CURRENT	0XFF
-
-/* LED COUNT REGISTER BIT */
-#define DA9052_LED_CONT_DIM		0X80
-
-/* ADC MAN REGISTERS BITS */
-#define DA9052_ADC_MAN_MAN_CONV	0X10
-#define DA9052_ADC_MAN_MUXSEL_VDDOUT	0X00
-#define DA9052_ADC_MAN_MUXSEL_ICH	0X01
-#define DA9052_ADC_MAN_MUXSEL_TBAT	0X02
-#define DA9052_ADC_MAN_MUXSEL_VBAT	0X03
-#define DA9052_ADC_MAN_MUXSEL_AD4	0X04
-#define DA9052_ADC_MAN_MUXSEL_AD5	0X05
-#define DA9052_ADC_MAN_MUXSEL_AD6	0X06
-#define DA9052_ADC_MAN_MUXSEL_VBBAT	0X09
-
-/* ADC CONTROL REGSISTERS BITS */
-#define DA9052_ADCCONT_COMP1V2EN	0X80
-#define DA9052_ADCCONT_ADCMODE		0X40
-#define DA9052_ADCCONT_TBATISRCEN	0X20
-#define DA9052_ADCCONT_AD4ISRCEN	0X10
-#define DA9052_ADCCONT_AUTOAD6EN	0X08
-#define DA9052_ADCCONT_AUTOAD5EN	0X04
-#define DA9052_ADCCONT_AUTOAD4EN	0X02
-#define DA9052_ADCCONT_AUTOVDDEN	0X01
-
-/* ADC 10 BIT MANUAL CONVERSION RESULT LOW REGISTER */
-#define DA9052_ADC_RES_LSB		0X03
-
-/* ADC 10 BIT MANUAL CONVERSION RESULT HIGH REGISTER */
-#define DA9052_ADCRESH_ADCRESMSB	0XFF
-
-/* VDD RES REGSISTER BIT*/
-#define DA9052_VDDRES_VDDOUTRES	0XFF
-
-/* VDD MON REGSISTER BIT */
-#define DA9052_VDDMON_VDDOUTMON	0XFF
-
-/* ICHG_AV REGSISTER BIT */
-#define DA9052_ICHGAV_ICHGAV		0XFF
-
-/* ICHG_THD REGSISTER BIT */
-#define DA9052_ICHGTHD_ICHGTHD		0XFF
-
-/* ICHG_END REGSISTER BIT */
-#define DA9052_ICHGEND_ICHGEND		0XFF
-
-/* TBAT_RES REGSISTER BIT */
-#define DA9052_TBATRES_TBATRES		0XFF
-
-/* TBAT_HIGHP REGSISTER BIT */
-#define DA9052_TBATHIGHP_TBATHIGHP	0XFF
-
-/* TBAT_HIGHN REGSISTER BIT */
-#define DA9052_TBATHIGHN_TBATHIGHN	0XFF
-
-/* TBAT_LOW REGSISTER BIT */
-#define DA9052_TBATLOW_TBATLOW		0XFF
-
-/* T_OFFSET REGSISTER BIT */
-#define DA9052_TOFFSET_TOFFSET		0XFF
-
-/* ADCIN4_RES REGSISTER BIT */
-#define DA9052_ADCIN4RES_ADCIN4RES	0XFF
-
-/* ADCIN4_HIGH REGSISTER BIT */
-#define DA9052_AUTO4HIGH_AUTO4HIGH	0XFF
-
-/* ADCIN4_LOW REGSISTER BIT */
-#define DA9052_AUTO4LOW_AUTO4LOW	0XFF
-
-/* ADCIN5_RES REGSISTER BIT */
-#define DA9052_ADCIN5RES_ADCIN5RES	0XFF
-
-/* ADCIN5_HIGH REGSISTER BIT */
-#define DA9052_AUTO5HIGH_AUTOHIGH	0XFF
-
-/* ADCIN5_LOW REGSISTER BIT */
-#define DA9052_AUTO5LOW_AUTO5LOW	0XFF
-
-/* ADCIN6_RES REGSISTER BIT */
-#define DA9052_ADCIN6RES_ADCIN6RES	0XFF
-
-/* ADCIN6_HIGH REGSISTER BIT */
-#define DA9052_AUTO6HIGH_AUTO6HIGH	0XFF
-
-/* ADCIN6_LOW REGSISTER BIT */
-#define DA9052_AUTO6LOW_AUTO6LOW	0XFF
-
-/* TJUNC_RES REGSISTER BIT*/
-#define DA9052_TJUNCRES_TJUNCRES	0XFF
-
-/* TSI REGISTER */
-/* TSI CONTROL REGISTER A BITS */
-#define DA9052_TSICONTA_TSIDELAY	0XC0
-#define DA9052_TSICONTA_TSISKIP	0X38
-#define DA9052_TSICONTA_TSIMODE	0X04
-#define DA9052_TSICONTA_PENDETEN	0X02
-#define DA9052_TSICONTA_AUTOTSIEN	0X01
-
-/* TSI CONTROL REGISTER B BITS */
-#define DA9052_TSICONTB_ADCREF		0X80
-#define DA9052_TSICONTB_TSIMAN		0X40
-#define DA9052_TSICONTB_TSIMUX		0X30
-#define DA9052_TSICONTB_TSISEL3	0X08
-#define DA9052_TSICONTB_TSISEL2	0X04
-#define DA9052_TSICONTB_TSISEL1	0X02
-#define DA9052_TSICONTB_TSISEL0	0X01
-
-/* TSI X CO-ORDINATE MSB RESULT REGISTER BITS */
-#define DA9052_TSIXMSB_TSIXM		0XFF
-
-/* TSI Y CO-ORDINATE MSB RESULT REGISTER BITS */
-#define DA9052_TSIYMSB_TSIYM		0XFF
-
-/* TSI CO-ORDINATE LSB RESULT REGISTER BITS */
-#define DA9052_TSILSB_PENDOWN		0X40
-#define DA9052_TSILSB_TSIZL		0X30
-#define DA9052_TSILSB_TSIYL		0X0C
-#define DA9052_TSILSB_TSIXL		0X03
-
-/* TSI Z MEASUREMENT MSB RESULT REGISTER BIT */
-#define DA9052_TSIZMSB_TSIZM		0XFF
-
-/* RTC REGISTER */
-/* RTC TIMER SECONDS REGISTER BITS */
-#define DA9052_COUNTS_MONITOR		0X40
-#define DA9052_RTC_SEC			0X3F
-
-/* RTC TIMER MINUTES REGISTER BIT */
-#define DA9052_RTC_MIN			0X3F
-
-/* RTC TIMER HOUR REGISTER BIT */
-#define DA9052_RTC_HOUR		0X1F
-
-/* RTC TIMER DAYS REGISTER BIT */
-#define DA9052_RTC_DAY			0X1F
-
-/* RTC TIMER MONTHS REGISTER BIT */
-#define DA9052_RTC_MONTH		0X0F
-
-/* RTC TIMER YEARS REGISTER BIT */
-#define DA9052_RTC_YEAR		0X3F
-
-/* RTC ALARM MINUTES REGISTER BITS */
-#define DA9052_ALARMM_I_TICK_TYPE	0X80
-#define DA9052_ALARMMI_ALARMTYPE	0X40
-
-/* RTC ALARM YEARS REGISTER BITS */
-#define DA9052_ALARM_Y_TICK_ON		0X80
-#define DA9052_ALARM_Y_ALARM_ON	0X40
-
-/* RTC SECONDS REGISTER A BITS */
-#define DA9052_SECONDA_SECONDSA	0XFF
-
-/* RTC SECONDS REGISTER B BITS */
-#define DA9052_SECONDB_SECONDSB	0XFF
-
-/* RTC SECONDS REGISTER C BITS */
-#define DA9052_SECONDC_SECONDSC	0XFF
-
-/* RTC SECONDS REGISTER D BITS */
-#define DA9052_SECONDD_SECONDSD	0XFF
-
-#endif
-/* __LINUX_MFD_DA9052_REG_H */
diff --git a/ANDROID_3.4.5/include/linux/mfd/davinci_voicecodec.h b/ANDROID_3.4.5/include/linux/mfd/davinci_voicecodec.h
deleted file mode 100644
index 0ab61320..00000000
--- a/ANDROID_3.4.5/include/linux/mfd/davinci_voicecodec.h
+++ /dev/null
@@ -1,126 +0,0 @@
-/*
- * DaVinci Voice Codec Core Interface for TI platforms
- *
- * Copyright (C) 2010 Texas Instruments, Inc
- *
- * Author: Miguel Aguilar <miguel.aguilar@ridgerun.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#ifndef __LINUX_MFD_DAVINCI_VOICECODEC_H_
-#define __LINUX_MFD_DAVINIC_VOICECODEC_H_
-
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/mfd/core.h>
-
-#include <mach/edma.h>
-
-/*
- * Register values.
- */
-#define DAVINCI_VC_PID			0x00
-#define DAVINCI_VC_CTRL			0x04
-#define DAVINCI_VC_INTEN		0x08
-#define DAVINCI_VC_INTSTATUS		0x0c
-#define DAVINCI_VC_INTCLR		0x10
-#define DAVINCI_VC_EMUL_CTRL		0x14
-#define DAVINCI_VC_RFIFO		0x20
-#define DAVINCI_VC_WFIFO		0x24
-#define DAVINCI_VC_FIFOSTAT		0x28
-#define DAVINCI_VC_TST_CTRL		0x2C
-#define DAVINCI_VC_REG05		0x94
-#define DAVINCI_VC_REG09		0xA4
-#define DAVINCI_VC_REG12		0xB0
-
-/* DAVINCI_VC_CTRL bit fields */
-#define DAVINCI_VC_CTRL_MASK		0x5500
-#define DAVINCI_VC_CTRL_RSTADC		BIT(0)
-#define DAVINCI_VC_CTRL_RSTDAC		BIT(1)
-#define DAVINCI_VC_CTRL_RD_BITS_8	BIT(4)
-#define DAVINCI_VC_CTRL_RD_UNSIGNED	BIT(5)
-#define DAVINCI_VC_CTRL_WD_BITS_8	BIT(6)
-#define DAVINCI_VC_CTRL_WD_UNSIGNED	BIT(7)
-#define DAVINCI_VC_CTRL_RFIFOEN		BIT(8)
-#define DAVINCI_VC_CTRL_RFIFOCL		BIT(9)
-#define DAVINCI_VC_CTRL_RFIFOMD_WORD_1	BIT(10)
-#define DAVINCI_VC_CTRL_WFIFOEN		BIT(12)
-#define DAVINCI_VC_CTRL_WFIFOCL		BIT(13)
-#define DAVINCI_VC_CTRL_WFIFOMD_WORD_1	BIT(14)
-
-/* DAVINCI_VC_INT bit fields */
-#define DAVINCI_VC_INT_MASK		0x3F
-#define DAVINCI_VC_INT_RDRDY_MASK	BIT(0)
-#define DAVINCI_VC_INT_RERROVF_MASK	BIT(1)
-#define DAVINCI_VC_INT_RERRUDR_MASK	BIT(2)
-#define DAVINCI_VC_INT_WDREQ_MASK	BIT(3)
-#define DAVINCI_VC_INT_WERROVF_MASKBIT	BIT(4)
-#define DAVINCI_VC_INT_WERRUDR_MASK	BIT(5)
-
-/* DAVINCI_VC_REG05 bit fields */
-#define DAVINCI_VC_REG05_PGA_GAIN	0x07
-
-/* DAVINCI_VC_REG09 bit fields */
-#define DAVINCI_VC_REG09_MUTE		0x40
-#define DAVINCI_VC_REG09_DIG_ATTEN	0x3F
-
-/* DAVINCI_VC_REG12 bit fields */
-#define DAVINCI_VC_REG12_POWER_ALL_ON	0xFD
-#define DAVINCI_VC_REG12_POWER_ALL_OFF	0x00
-
-#define DAVINCI_VC_CELLS		2
-
-enum davinci_vc_cells {
-	DAVINCI_VC_VCIF_CELL,
-	DAVINCI_VC_CQ93VC_CELL,
-};
-
-struct davinci_vcif {
-	struct platform_device	*pdev;
-	u32 dma_tx_channel;
-	u32 dma_rx_channel;
-	dma_addr_t dma_tx_addr;
-	dma_addr_t dma_rx_addr;
-};
-
-struct cq93vc {
-	struct platform_device *pdev;
-	struct snd_soc_codec *codec;
-	u32 sysclk;
-};
-
-struct davinci_vc;
-
-struct davinci_vc {
-	/* Device data */
-	struct device *dev;
-	struct platform_device *pdev;
-	struct clk *clk;
-
-	/* Memory resources */
-	void __iomem *base;
-	resource_size_t pbase;
-	size_t base_size;
-
-	/* MFD cells */
-	struct mfd_cell cells[DAVINCI_VC_CELLS];
-
-	/* Client devices */
-	struct davinci_vcif davinci_vcif;
-	struct cq93vc cq93vc;
-};
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/mfd/db5500-prcmu.h b/ANDROID_3.4.5/include/linux/mfd/db5500-prcmu.h
deleted file mode 100644
index 5a049dfa..00000000
--- a/ANDROID_3.4.5/include/linux/mfd/db5500-prcmu.h
+++ /dev/null
@@ -1,105 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * License Terms: GNU General Public License v2
- *
- * U5500 PRCMU API.
- */
-#ifndef __MFD_DB5500_PRCMU_H
-#define __MFD_DB5500_PRCMU_H
-
-static inline int prcmu_resetout(u8 resoutn, u8 state)
-{
-	return 0;
-}
-
-static inline int db5500_prcmu_set_epod(u16 epod_id, u8 epod_state)
-{
-	return 0;
-}
-
-static inline int db5500_prcmu_request_clock(u8 clock, bool enable)
-{
-	return 0;
-}
-
-static inline int db5500_prcmu_set_power_state(u8 state, bool keep_ulp_clk,
-	bool keep_ap_pll)
-{
-	return 0;
-}
-
-static inline int db5500_prcmu_config_esram0_deep_sleep(u8 state)
-{
-	return 0;
-}
-
-static inline u16 db5500_prcmu_get_reset_code(void)
-{
-	return 0;
-}
-
-static inline bool db5500_prcmu_is_ac_wake_requested(void)
-{
-	return 0;
-}
-
-static inline int db5500_prcmu_set_arm_opp(u8 opp)
-{
-	return 0;
-}
-
-static inline int db5500_prcmu_get_arm_opp(void)
-{
-	return 0;
-}
-
-static inline void db5500_prcmu_config_abb_event_readout(u32 abb_events) {}
-
-static inline void db5500_prcmu_get_abb_event_buffer(void __iomem **buf) {}
-
-static inline void db5500_prcmu_system_reset(u16 reset_code) {}
-
-static inline void db5500_prcmu_enable_wakeups(u32 wakeups) {}
-
-#ifdef CONFIG_MFD_DB5500_PRCMU
-
-void db5500_prcmu_early_init(void);
-int db5500_prcmu_set_display_clocks(void);
-int db5500_prcmu_disable_dsipll(void);
-int db5500_prcmu_enable_dsipll(void);
-int db5500_prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size);
-int db5500_prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size);
-
-#else /* !CONFIG_UX500_SOC_DB5500 */
-
-static inline void db5500_prcmu_early_init(void) {}
-
-static inline int db5500_prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size)
-{
-	return -ENOSYS;
-}
-
-static inline int db5500_prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size)
-{
-	return -ENOSYS;
-}
-
-static inline int db5500_prcmu_set_display_clocks(void)
-{
-	return 0;
-}
-
-static inline int db5500_prcmu_disable_dsipll(void)
-{
-	return 0;
-}
-
-static inline int db5500_prcmu_enable_dsipll(void)
-{
-	return 0;
-}
-
-#endif /* CONFIG_MFD_DB5500_PRCMU */
-
-#endif /* __MFD_DB5500_PRCMU_H */
diff --git a/ANDROID_3.4.5/include/linux/mfd/db8500-prcmu.h b/ANDROID_3.4.5/include/linux/mfd/db8500-prcmu.h
deleted file mode 100644
index b3a43b12..00000000
--- a/ANDROID_3.4.5/include/linux/mfd/db8500-prcmu.h
+++ /dev/null
@@ -1,795 +0,0 @@
-/*
- * Copyright (C) STMicroelectronics 2009
- * Copyright (C) ST-Ericsson SA 2010
- *
- * License Terms: GNU General Public License v2
- * Author: Kumar Sanghvi <kumar.sanghvi@stericsson.com>
- *
- * PRCMU f/w APIs
- */
-#ifndef __MFD_DB8500_PRCMU_H
-#define __MFD_DB8500_PRCMU_H
-
-#include <linux/interrupt.h>
-#include <linux/bitops.h>
-
-/*
- * Registers
- */
-#define DB8500_PRCM_GPIOCR 0x138
-#define DB8500_PRCM_GPIOCR_DBG_UARTMOD_CMD0	BIT(0)
-#define DB8500_PRCM_GPIOCR_DBG_STM_APE_CMD	BIT(9)
-#define DB8500_PRCM_GPIOCR_DBG_STM_MOD_CMD1	BIT(11)
-#define DB8500_PRCM_GPIOCR_SPI2_SELECT		BIT(23)
-
-#define DB8500_PRCM_LINE_VALUE 0x170
-#define DB8500_PRCM_LINE_VALUE_HSI_CAWAKE0	BIT(3)
-
-#define DB8500_PRCM_DSI_SW_RESET 0x324
-#define DB8500_PRCM_DSI_SW_RESET_DSI0_SW_RESETN BIT(0)
-#define DB8500_PRCM_DSI_SW_RESET_DSI1_SW_RESETN BIT(1)
-#define DB8500_PRCM_DSI_SW_RESET_DSI2_SW_RESETN BIT(2)
-
-/* This portion previously known as <mach/prcmu-fw-defs_v1.h> */
-
-/**
- * enum state - ON/OFF state definition
- * @OFF: State is ON
- * @ON: State is OFF
- *
- */
-enum state {
-	OFF = 0x0,
-	ON  = 0x1,
-};
-
-/**
- * enum ret_state - general purpose On/Off/Retention states
- *
- */
-enum ret_state {
-	OFFST = 0,
-	ONST  = 1,
-	RETST = 2
-};
-
-/**
- * enum clk_arm - ARM Cortex A9 clock schemes
- * @A9_OFF:
- * @A9_BOOT:
- * @A9_OPPT1:
- * @A9_OPPT2:
- * @A9_EXTCLK:
- */
-enum clk_arm {
-	A9_OFF,
-	A9_BOOT,
-	A9_OPPT1,
-	A9_OPPT2,
-	A9_EXTCLK
-};
-
-/**
- * enum clk_gen - GEN#0/GEN#1 clock schemes
- * @GEN_OFF:
- * @GEN_BOOT:
- * @GEN_OPPT1:
- */
-enum clk_gen {
-	GEN_OFF,
-	GEN_BOOT,
-	GEN_OPPT1,
-};
-
-/* some information between arm and xp70 */
-
-/**
- * enum romcode_write - Romcode message written by A9 AND read by XP70
- * @RDY_2_DS: Value set when ApDeepSleep state can be executed by XP70
- * @RDY_2_XP70_RST: Value set when 0x0F has been successfully polled by the
- *                 romcode. The xp70 will go into self-reset
- */
-enum romcode_write {
-	RDY_2_DS = 0x09,
-	RDY_2_XP70_RST = 0x10
-};
-
-/**
- * enum romcode_read - Romcode message written by XP70 and read by A9
- * @INIT: Init value when romcode field is not used
- * @FS_2_DS: Value set when power state is going from ApExecute to
- *          ApDeepSleep
- * @END_DS: Value set when ApDeepSleep power state is reached coming from
- *         ApExecute state
- * @DS_TO_FS: Value set when power state is going from ApDeepSleep to
- *           ApExecute
- * @END_FS: Value set when ApExecute power state is reached coming from
- *         ApDeepSleep state
- * @SWR: Value set when power state is going to ApReset
- * @END_SWR: Value set when the xp70 finished executing ApReset actions and
- *          waits for romcode acknowledgment to go to self-reset
- */
-enum romcode_read {
-	INIT = 0x00,
-	FS_2_DS = 0x0A,
-	END_DS = 0x0B,
-	DS_TO_FS = 0x0C,
-	END_FS = 0x0D,
-	SWR = 0x0E,
-	END_SWR = 0x0F
-};
-
-/**
- * enum ap_pwrst - current power states defined in PRCMU firmware
- * @NO_PWRST: Current power state init
- * @AP_BOOT: Current power state is apBoot
- * @AP_EXECUTE: Current power state is apExecute
- * @AP_DEEP_SLEEP: Current power state is apDeepSleep
- * @AP_SLEEP: Current power state is apSleep
- * @AP_IDLE: Current power state is apIdle
- * @AP_RESET: Current power state is apReset
- */
-enum ap_pwrst {
-	NO_PWRST = 0x00,
-	AP_BOOT = 0x01,
-	AP_EXECUTE = 0x02,
-	AP_DEEP_SLEEP = 0x03,
-	AP_SLEEP = 0x04,
-	AP_IDLE = 0x05,
-	AP_RESET = 0x06
-};
-
-/**
- * enum ap_pwrst_trans - Transition states defined in PRCMU firmware
- * @NO_TRANSITION: No power state transition
- * @APEXECUTE_TO_APSLEEP: Power state transition from ApExecute to ApSleep
- * @APIDLE_TO_APSLEEP: Power state transition from ApIdle to ApSleep
- * @APBOOT_TO_APEXECUTE: Power state transition from ApBoot to ApExecute
- * @APEXECUTE_TO_APDEEPSLEEP: Power state transition from ApExecute to
- *                          ApDeepSleep
- * @APEXECUTE_TO_APIDLE: Power state transition from ApExecute to ApIdle
- */
-enum ap_pwrst_trans {
-	PRCMU_AP_NO_CHANGE		= 0x00,
-	APEXECUTE_TO_APSLEEP		= 0x01,
-	APIDLE_TO_APSLEEP		= 0x02, /* To be removed */
-	PRCMU_AP_SLEEP			= 0x01,
-	APBOOT_TO_APEXECUTE		= 0x03,
-	APEXECUTE_TO_APDEEPSLEEP	= 0x04, /* To be removed */
-	PRCMU_AP_DEEP_SLEEP		= 0x04,
-	APEXECUTE_TO_APIDLE		= 0x05, /* To be removed */
-	PRCMU_AP_IDLE			= 0x05,
-	PRCMU_AP_DEEP_IDLE		= 0x07,
-};
-
-/**
- * enum hw_acc_state - State definition for hardware accelerator
- * @HW_NO_CHANGE: The hardware accelerator state must remain unchanged
- * @HW_OFF: The hardware accelerator must be switched off
- * @HW_OFF_RAMRET: The hardware accelerator must be switched off with its
- *               internal RAM in retention
- * @HW_ON: The hwa hardware accelerator hwa must be switched on
- *
- * NOTE! Deprecated, to be removed when all users switched over to use the
- * regulator API.
- */
-enum hw_acc_state {
-	HW_NO_CHANGE = 0x00,
-	HW_OFF = 0x01,
-	HW_OFF_RAMRET = 0x02,
-	HW_ON = 0x04
-};
-
-/**
- * enum  mbox_2_arm_stat - Status messages definition for mbox_arm
- * @BOOT_TO_EXECUTEOK: The apBoot to apExecute state transition has been
- *                    completed
- * @DEEPSLEEPOK: The apExecute to apDeepSleep state transition has been
- *              completed
- * @SLEEPOK: The apExecute to apSleep state transition has been completed
- * @IDLEOK: The apExecute to apIdle state transition has been completed
- * @SOFTRESETOK: The A9 watchdog/ SoftReset state has been completed
- * @SOFTRESETGO : The A9 watchdog/SoftReset state is on going
- * @BOOT_TO_EXECUTE: The apBoot to apExecute state transition is on going
- * @EXECUTE_TO_DEEPSLEEP: The apExecute to apDeepSleep state transition is on
- *                       going
- * @DEEPSLEEP_TO_EXECUTE: The apDeepSleep to apExecute state transition is on
- *                       going
- * @DEEPSLEEP_TO_EXECUTEOK: The apDeepSleep to apExecute state transition has
- *                         been completed
- * @EXECUTE_TO_SLEEP: The apExecute to apSleep state transition is on going
- * @SLEEP_TO_EXECUTE: The apSleep to apExecute state transition is on going
- * @SLEEP_TO_EXECUTEOK: The apSleep to apExecute state transition has been
- *                     completed
- * @EXECUTE_TO_IDLE: The apExecute to apIdle state transition is on going
- * @IDLE_TO_EXECUTE: The apIdle to apExecute state transition is on going
- * @IDLE_TO_EXECUTEOK: The apIdle to apExecute state transition has been
- *                    completed
- * @INIT_STATUS: Status init
- */
-enum ap_pwrsttr_status {
-	BOOT_TO_EXECUTEOK = 0xFF,
-	DEEPSLEEPOK = 0xFE,
-	SLEEPOK = 0xFD,
-	IDLEOK = 0xFC,
-	SOFTRESETOK = 0xFB,
-	SOFTRESETGO = 0xFA,
-	BOOT_TO_EXECUTE = 0xF9,
-	EXECUTE_TO_DEEPSLEEP = 0xF8,
-	DEEPSLEEP_TO_EXECUTE = 0xF7,
-	DEEPSLEEP_TO_EXECUTEOK = 0xF6,
-	EXECUTE_TO_SLEEP = 0xF5,
-	SLEEP_TO_EXECUTE = 0xF4,
-	SLEEP_TO_EXECUTEOK = 0xF3,
-	EXECUTE_TO_IDLE = 0xF2,
-	IDLE_TO_EXECUTE = 0xF1,
-	IDLE_TO_EXECUTEOK = 0xF0,
-	RDYTODS_RETURNTOEXE    = 0xEF,
-	NORDYTODS_RETURNTOEXE  = 0xEE,
-	EXETOSLEEP_RETURNTOEXE = 0xED,
-	EXETOIDLE_RETURNTOEXE  = 0xEC,
-	INIT_STATUS = 0xEB,
-
-	/*error messages */
-	INITERROR                     = 0x00,
-	PLLARMLOCKP_ER                = 0x01,
-	PLLDDRLOCKP_ER                = 0x02,
-	PLLSOCLOCKP_ER                = 0x03,
-	PLLSOCK1LOCKP_ER              = 0x04,
-	ARMWFI_ER                     = 0x05,
-	SYSCLKOK_ER                   = 0x06,
-	I2C_NACK_DATA_ER              = 0x07,
-	BOOT_ER                       = 0x08,
-	I2C_STATUS_ALWAYS_1           = 0x0A,
-	I2C_NACK_REG_ADDR_ER          = 0x0B,
-	I2C_NACK_DATA0123_ER          = 0x1B,
-	I2C_NACK_ADDR_ER              = 0x1F,
-	CURAPPWRSTISNOT_BOOT          = 0x20,
-	CURAPPWRSTISNOT_EXECUTE       = 0x21,
-	CURAPPWRSTISNOT_SLEEPMODE     = 0x22,
-	CURAPPWRSTISNOT_CORRECTFORIT10 = 0x23,
-	FIFO4500WUISNOT_WUPEVENT      = 0x24,
-	PLL32KLOCKP_ER                = 0x29,
-	DDRDEEPSLEEPOK_ER             = 0x2A,
-	ROMCODEREADY_ER               = 0x50,
-	WUPBEFOREDS                   = 0x51,
-	DDRCONFIG_ER                  = 0x52,
-	WUPBEFORESLEEP                = 0x53,
-	WUPBEFOREIDLE                 = 0x54
-};  /* earlier called as  mbox_2_arm_stat */
-
-/**
- * enum dvfs_stat - DVFS status messages definition
- * @DVFS_GO: A state transition DVFS is on going
- * @DVFS_ARM100OPPOK: The state transition DVFS has been completed for 100OPP
- * @DVFS_ARM50OPPOK: The state transition DVFS has been completed for 50OPP
- * @DVFS_ARMEXTCLKOK: The state transition DVFS has been completed for EXTCLK
- * @DVFS_NOCHGTCLKOK: The state transition DVFS has been completed for
- *                   NOCHGCLK
- * @DVFS_INITSTATUS: Value init
- */
-enum dvfs_stat {
-	DVFS_GO = 0xFF,
-	DVFS_ARM100OPPOK = 0xFE,
-	DVFS_ARM50OPPOK = 0xFD,
-	DVFS_ARMEXTCLKOK = 0xFC,
-	DVFS_NOCHGTCLKOK = 0xFB,
-	DVFS_INITSTATUS = 0x00
-};
-
-/**
- * enum sva_mmdsp_stat - SVA MMDSP status messages
- * @SVA_MMDSP_GO: SVAMMDSP interrupt has happened
- * @SVA_MMDSP_INIT: Status init
- */
-enum sva_mmdsp_stat {
-	SVA_MMDSP_GO = 0xFF,
-	SVA_MMDSP_INIT = 0x00
-};
-
-/**
- * enum sia_mmdsp_stat - SIA MMDSP status messages
- * @SIA_MMDSP_GO: SIAMMDSP interrupt has happened
- * @SIA_MMDSP_INIT: Status init
- */
-enum sia_mmdsp_stat {
-	SIA_MMDSP_GO = 0xFF,
-	SIA_MMDSP_INIT = 0x00
-};
-
-/**
- * enum  mbox_to_arm_err - Error messages definition
- * @INIT_ERR: Init value
- * @PLLARMLOCKP_ERR: PLLARM has not been correctly locked in given time
- * @PLLDDRLOCKP_ERR: PLLDDR has not been correctly locked in the given time
- * @PLLSOC0LOCKP_ERR: PLLSOC0 has not been correctly locked in the given time
- * @PLLSOC1LOCKP_ERR: PLLSOC1 has not been correctly locked in the given time
- * @ARMWFI_ERR: The ARM WFI has not been correctly executed in the given time
- * @SYSCLKOK_ERR: The SYSCLK is not available in the given time
- * @BOOT_ERR: Romcode has not validated the XP70 self reset in the given time
- * @ROMCODESAVECONTEXT: The Romcode didn.t correctly save it secure context
- * @VARMHIGHSPEEDVALTO_ERR: The ARM high speed supply value transfered
- *          through I2C has not been correctly executed in the given time
- * @VARMHIGHSPEEDACCESS_ERR: The command value of VarmHighSpeedVal transfered
- *             through I2C has not been correctly executed in the given time
- * @VARMLOWSPEEDVALTO_ERR:The ARM low speed supply value transfered through
- *                     I2C has not been correctly executed in the given time
- * @VARMLOWSPEEDACCESS_ERR: The command value of VarmLowSpeedVal transfered
- *             through I2C has not been correctly executed in the given time
- * @VARMRETENTIONVALTO_ERR: The ARM retention supply value transfered through
- *                     I2C has not been correctly executed in the given time
- * @VARMRETENTIONACCESS_ERR: The command value of VarmRetentionVal transfered
- *             through I2C has not been correctly executed in the given time
- * @VAPEHIGHSPEEDVALTO_ERR: The APE highspeed supply value transfered through
- *                     I2C has not been correctly executed in the given time
- * @VSAFEHPVALTO_ERR: The SAFE high power supply value transfered through I2C
- *                         has not been correctly executed in the given time
- * @VMODSEL1VALTO_ERR: The MODEM sel1 supply value transfered through I2C has
- *                             not been correctly executed in the given time
- * @VMODSEL2VALTO_ERR: The MODEM sel2 supply value transfered through I2C has
- *                             not been correctly executed in the given time
- * @VARMOFFACCESS_ERR: The command value of Varm ON/OFF transfered through
- *                     I2C has not been correctly executed in the given time
- * @VAPEOFFACCESS_ERR: The command value of Vape ON/OFF transfered through
- *                     I2C has not been correctly executed in the given time
- * @VARMRETACCES_ERR: The command value of Varm retention ON/OFF transfered
- *             through I2C has not been correctly executed in the given time
- * @CURAPPWRSTISNOTBOOT:Generated when Arm want to do power state transition
- *             ApBoot to ApExecute but the power current state is not Apboot
- * @CURAPPWRSTISNOTEXECUTE: Generated when Arm want to do power state
- *              transition from ApExecute to others power state but the
- *              power current state is not ApExecute
- * @CURAPPWRSTISNOTSLEEPMODE: Generated when wake up events are transmitted
- *             but the power current state is not ApDeepSleep/ApSleep/ApIdle
- * @CURAPPWRSTISNOTCORRECTDBG:  Generated when wake up events are transmitted
- *              but the power current state is not correct
- * @ARMREGU1VALTO_ERR:The ArmRegu1 value transferred through I2C has not
- *                    been correctly executed in the given time
- * @ARMREGU2VALTO_ERR: The ArmRegu2 value transferred through I2C has not
- *                    been correctly executed in the given time
- * @VAPEREGUVALTO_ERR: The VApeRegu value transfered through I2C has not
- *                    been correctly executed in the given time
- * @VSMPS3REGUVALTO_ERR: The VSmps3Regu value transfered through I2C has not
- *                      been correctly executed in the given time
- * @VMODREGUVALTO_ERR: The VModemRegu value transfered through I2C has not
- *                    been correctly executed in the given time
- */
-enum mbox_to_arm_err {
-	INIT_ERR = 0x00,
-	PLLARMLOCKP_ERR = 0x01,
-	PLLDDRLOCKP_ERR = 0x02,
-	PLLSOC0LOCKP_ERR = 0x03,
-	PLLSOC1LOCKP_ERR = 0x04,
-	ARMWFI_ERR = 0x05,
-	SYSCLKOK_ERR = 0x06,
-	BOOT_ERR = 0x07,
-	ROMCODESAVECONTEXT = 0x08,
-	VARMHIGHSPEEDVALTO_ERR = 0x10,
-	VARMHIGHSPEEDACCESS_ERR = 0x11,
-	VARMLOWSPEEDVALTO_ERR = 0x12,
-	VARMLOWSPEEDACCESS_ERR = 0x13,
-	VARMRETENTIONVALTO_ERR = 0x14,
-	VARMRETENTIONACCESS_ERR = 0x15,
-	VAPEHIGHSPEEDVALTO_ERR = 0x16,
-	VSAFEHPVALTO_ERR = 0x17,
-	VMODSEL1VALTO_ERR = 0x18,
-	VMODSEL2VALTO_ERR = 0x19,
-	VARMOFFACCESS_ERR = 0x1A,
-	VAPEOFFACCESS_ERR = 0x1B,
-	VARMRETACCES_ERR = 0x1C,
-	CURAPPWRSTISNOTBOOT = 0x20,
-	CURAPPWRSTISNOTEXECUTE = 0x21,
-	CURAPPWRSTISNOTSLEEPMODE = 0x22,
-	CURAPPWRSTISNOTCORRECTDBG = 0x23,
-	ARMREGU1VALTO_ERR = 0x24,
-	ARMREGU2VALTO_ERR = 0x25,
-	VAPEREGUVALTO_ERR = 0x26,
-	VSMPS3REGUVALTO_ERR = 0x27,
-	VMODREGUVALTO_ERR = 0x28
-};
-
-enum hw_acc {
-	SVAMMDSP = 0,
-	SVAPIPE = 1,
-	SIAMMDSP = 2,
-	SIAPIPE = 3,
-	SGA = 4,
-	B2R2MCDE = 5,
-	ESRAM12 = 6,
-	ESRAM34 = 7,
-};
-
-enum cs_pwrmgt {
-	PWRDNCS0  = 0,
-	WKUPCS0   = 1,
-	PWRDNCS1  = 2,
-	WKUPCS1   = 3
-};
-
-/* Defs related to autonomous power management */
-
-/**
- * enum sia_sva_pwr_policy - Power policy
- * @NO_CHGT:	No change
- * @DSPOFF_HWPOFF:
- * @DSPOFFRAMRET_HWPOFF:
- * @DSPCLKOFF_HWPOFF:
- * @DSPCLKOFF_HWPCLKOFF:
- *
- */
-enum sia_sva_pwr_policy {
-	NO_CHGT			= 0x0,
-	DSPOFF_HWPOFF		= 0x1,
-	DSPOFFRAMRET_HWPOFF	= 0x2,
-	DSPCLKOFF_HWPOFF	= 0x3,
-	DSPCLKOFF_HWPCLKOFF	= 0x4,
-};
-
-/**
- * enum auto_enable - Auto Power enable
- * @AUTO_OFF:
- * @AUTO_ON:
- *
- */
-enum auto_enable {
-	AUTO_OFF	= 0x0,
-	AUTO_ON		= 0x1,
-};
-
-/* End of file previously known as prcmu-fw-defs_v1.h */
-
-/**
- * enum prcmu_power_status - results from set_power_state
- * @PRCMU_SLEEP_OK: Sleep went ok
- * @PRCMU_DEEP_SLEEP_OK: DeepSleep went ok
- * @PRCMU_IDLE_OK: Idle went ok
- * @PRCMU_DEEPIDLE_OK: DeepIdle went ok
- * @PRCMU_PRCMU2ARMPENDINGIT_ER: Pending interrupt detected
- * @PRCMU_ARMPENDINGIT_ER: Pending interrupt detected
- *
- */
-enum prcmu_power_status {
-	PRCMU_SLEEP_OK			= 0xf3,
-	PRCMU_DEEP_SLEEP_OK		= 0xf6,
-	PRCMU_IDLE_OK			= 0xf0,
-	PRCMU_DEEPIDLE_OK		= 0xe3,
-	PRCMU_PRCMU2ARMPENDINGIT_ER	= 0x91,
-	PRCMU_ARMPENDINGIT_ER		= 0x93,
-};
-
-/*
- * Definitions for autonomous power management configuration.
- */
-
-#define PRCMU_AUTO_PM_OFF 0
-#define PRCMU_AUTO_PM_ON 1
-
-#define PRCMU_AUTO_PM_POWER_ON_HSEM BIT(0)
-#define PRCMU_AUTO_PM_POWER_ON_ABB_FIFO_IT BIT(1)
-
-enum prcmu_auto_pm_policy {
-	PRCMU_AUTO_PM_POLICY_NO_CHANGE,
-	PRCMU_AUTO_PM_POLICY_DSP_OFF_HWP_OFF,
-	PRCMU_AUTO_PM_POLICY_DSP_OFF_RAMRET_HWP_OFF,
-	PRCMU_AUTO_PM_POLICY_DSP_CLK_OFF_HWP_OFF,
-	PRCMU_AUTO_PM_POLICY_DSP_CLK_OFF_HWP_CLK_OFF,
-};
-
-/**
- * struct prcmu_auto_pm_config - Autonomous power management configuration.
- * @sia_auto_pm_enable: SIA autonomous pm enable. (PRCMU_AUTO_PM_{OFF,ON})
- * @sia_power_on:       SIA power ON enable. (PRCMU_AUTO_PM_POWER_ON_* bitmask)
- * @sia_policy:         SIA power policy. (enum prcmu_auto_pm_policy)
- * @sva_auto_pm_enable: SVA autonomous pm enable. (PRCMU_AUTO_PM_{OFF,ON})
- * @sva_power_on:       SVA power ON enable. (PRCMU_AUTO_PM_POWER_ON_* bitmask)
- * @sva_policy:         SVA power policy. (enum prcmu_auto_pm_policy)
- */
-struct prcmu_auto_pm_config {
-	u8 sia_auto_pm_enable;
-	u8 sia_power_on;
-	u8 sia_policy;
-	u8 sva_auto_pm_enable;
-	u8 sva_power_on;
-	u8 sva_policy;
-};
-
-#define PRCMU_FW_PROJECT_U8500		2
-#define PRCMU_FW_PROJECT_U9500		4
-#define PRCMU_FW_PROJECT_U8500_C2	7
-#define PRCMU_FW_PROJECT_U9500_C2	11
-#define PRCMU_FW_PROJECT_U8520		13
-#define PRCMU_FW_PROJECT_U8420		14
-
-struct prcmu_fw_version {
-	u8 project;
-	u8 api_version;
-	u8 func_version;
-	u8 errata;
-};
-
-#ifdef CONFIG_MFD_DB8500_PRCMU
-
-void db8500_prcmu_early_init(void);
-int prcmu_set_rc_a2p(enum romcode_write);
-enum romcode_read prcmu_get_rc_p2a(void);
-enum ap_pwrst prcmu_get_xp70_current_state(void);
-bool prcmu_has_arm_maxopp(void);
-struct prcmu_fw_version *prcmu_get_fw_version(void);
-int prcmu_request_ape_opp_100_voltage(bool enable);
-int prcmu_release_usb_wakeup_state(void);
-void prcmu_configure_auto_pm(struct prcmu_auto_pm_config *sleep,
-	struct prcmu_auto_pm_config *idle);
-bool prcmu_is_auto_pm_enabled(void);
-
-int prcmu_config_clkout(u8 clkout, u8 source, u8 div);
-int prcmu_set_clock_divider(u8 clock, u8 divider);
-int db8500_prcmu_config_hotdog(u8 threshold);
-int db8500_prcmu_config_hotmon(u8 low, u8 high);
-int db8500_prcmu_start_temp_sense(u16 cycles32k);
-int db8500_prcmu_stop_temp_sense(void);
-int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size);
-int prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size);
-
-void prcmu_ac_wake_req(void);
-void prcmu_ac_sleep_req(void);
-void db8500_prcmu_modem_reset(void);
-
-int db8500_prcmu_config_a9wdog(u8 num, bool sleep_auto_off);
-int db8500_prcmu_enable_a9wdog(u8 id);
-int db8500_prcmu_disable_a9wdog(u8 id);
-int db8500_prcmu_kick_a9wdog(u8 id);
-int db8500_prcmu_load_a9wdog(u8 id, u32 val);
-
-void db8500_prcmu_system_reset(u16 reset_code);
-int db8500_prcmu_set_power_state(u8 state, bool keep_ulp_clk, bool keep_ap_pll);
-u8 db8500_prcmu_get_power_state_result(void);
-int db8500_prcmu_gic_decouple(void);
-int db8500_prcmu_gic_recouple(void);
-int db8500_prcmu_copy_gic_settings(void);
-bool db8500_prcmu_gic_pending_irq(void);
-bool db8500_prcmu_pending_irq(void);
-bool db8500_prcmu_is_cpu_in_wfi(int cpu);
-void db8500_prcmu_enable_wakeups(u32 wakeups);
-int db8500_prcmu_set_epod(u16 epod_id, u8 epod_state);
-int db8500_prcmu_request_clock(u8 clock, bool enable);
-int db8500_prcmu_set_display_clocks(void);
-int db8500_prcmu_disable_dsipll(void);
-int db8500_prcmu_enable_dsipll(void);
-void db8500_prcmu_config_abb_event_readout(u32 abb_events);
-void db8500_prcmu_get_abb_event_buffer(void __iomem **buf);
-int db8500_prcmu_config_esram0_deep_sleep(u8 state);
-u16 db8500_prcmu_get_reset_code(void);
-bool db8500_prcmu_is_ac_wake_requested(void);
-int db8500_prcmu_set_arm_opp(u8 opp);
-int db8500_prcmu_get_arm_opp(void);
-int db8500_prcmu_set_ape_opp(u8 opp);
-int db8500_prcmu_get_ape_opp(void);
-int db8500_prcmu_set_ddr_opp(u8 opp);
-int db8500_prcmu_get_ddr_opp(void);
-
-u32 db8500_prcmu_read(unsigned int reg);
-void db8500_prcmu_write(unsigned int reg, u32 value);
-void db8500_prcmu_write_masked(unsigned int reg, u32 mask, u32 value);
-
-#else /* !CONFIG_MFD_DB8500_PRCMU */
-
-static inline void db8500_prcmu_early_init(void) {}
-
-static inline int prcmu_set_rc_a2p(enum romcode_write code)
-{
-	return 0;
-}
-
-static inline enum romcode_read prcmu_get_rc_p2a(void)
-{
-	return INIT;
-}
-
-static inline enum ap_pwrst prcmu_get_xp70_current_state(void)
-{
-	return AP_EXECUTE;
-}
-
-static inline bool prcmu_has_arm_maxopp(void)
-{
-	return false;
-}
-
-static inline struct prcmu_fw_version *prcmu_get_fw_version(void)
-{
-	return NULL;
-}
-
-static inline int db8500_prcmu_set_ape_opp(u8 opp)
-{
-	return 0;
-}
-
-static inline int db8500_prcmu_get_ape_opp(void)
-{
-	return APE_100_OPP;
-}
-
-static inline int prcmu_request_ape_opp_100_voltage(bool enable)
-{
-	return 0;
-}
-
-static inline int prcmu_release_usb_wakeup_state(void)
-{
-	return 0;
-}
-
-static inline int db8500_prcmu_set_ddr_opp(u8 opp)
-{
-	return 0;
-}
-
-static inline int db8500_prcmu_get_ddr_opp(void)
-{
-	return DDR_100_OPP;
-}
-
-static inline void prcmu_configure_auto_pm(struct prcmu_auto_pm_config *sleep,
-	struct prcmu_auto_pm_config *idle)
-{
-}
-
-static inline bool prcmu_is_auto_pm_enabled(void)
-{
-	return false;
-}
-
-static inline int prcmu_config_clkout(u8 clkout, u8 source, u8 div)
-{
-	return 0;
-}
-
-static inline int prcmu_set_clock_divider(u8 clock, u8 divider)
-{
-	return 0;
-}
-
-static inline int db8500_prcmu_config_hotdog(u8 threshold)
-{
-	return 0;
-}
-
-static inline int db8500_prcmu_config_hotmon(u8 low, u8 high)
-{
-	return 0;
-}
-
-static inline int db8500_prcmu_start_temp_sense(u16 cycles32k)
-{
-	return 0;
-}
-
-static inline int db8500_prcmu_stop_temp_sense(void)
-{
-	return 0;
-}
-
-static inline int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size)
-{
-	return -ENOSYS;
-}
-
-static inline int prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size)
-{
-	return -ENOSYS;
-}
-
-static inline void prcmu_ac_wake_req(void) {}
-
-static inline void prcmu_ac_sleep_req(void) {}
-
-static inline void db8500_prcmu_modem_reset(void) {}
-
-static inline void db8500_prcmu_system_reset(u16 reset_code) {}
-
-static inline int db8500_prcmu_set_power_state(u8 state, bool keep_ulp_clk,
-	bool keep_ap_pll)
-{
-	return 0;
-}
-
-static inline u8 db8500_prcmu_get_power_state_result(void)
-{
-	return 0;
-}
-
-static inline void db8500_prcmu_enable_wakeups(u32 wakeups) {}
-
-static inline int db8500_prcmu_set_epod(u16 epod_id, u8 epod_state)
-{
-	return 0;
-}
-
-static inline int db8500_prcmu_request_clock(u8 clock, bool enable)
-{
-	return 0;
-}
-
-static inline int db8500_prcmu_set_display_clocks(void)
-{
-	return 0;
-}
-
-static inline int db8500_prcmu_disable_dsipll(void)
-{
-	return 0;
-}
-
-static inline int db8500_prcmu_enable_dsipll(void)
-{
-	return 0;
-}
-
-static inline int db8500_prcmu_config_esram0_deep_sleep(u8 state)
-{
-	return 0;
-}
-
-static inline void db8500_prcmu_config_abb_event_readout(u32 abb_events) {}
-
-static inline void db8500_prcmu_get_abb_event_buffer(void __iomem **buf) {}
-
-static inline u16 db8500_prcmu_get_reset_code(void)
-{
-	return 0;
-}
-
-static inline int db8500_prcmu_config_a9wdog(u8 num, bool sleep_auto_off)
-{
-	return 0;
-}
-
-static inline int db8500_prcmu_enable_a9wdog(u8 id)
-{
-	return 0;
-}
-
-static inline int db8500_prcmu_disable_a9wdog(u8 id)
-{
-	return 0;
-}
-
-static inline int db8500_prcmu_kick_a9wdog(u8 id)
-{
-	return 0;
-}
-
-static inline int db8500_prcmu_load_a9wdog(u8 id, u32 val)
-{
-	return 0;
-}
-
-static inline bool db8500_prcmu_is_ac_wake_requested(void)
-{
-	return 0;
-}
-
-static inline int db8500_prcmu_set_arm_opp(u8 opp)
-{
-	return 0;
-}
-
-static inline int db8500_prcmu_get_arm_opp(void)
-{
-	return 0;
-}
-
-static inline u32 db8500_prcmu_read(unsigned int reg)
-{
-	return 0;
-}
-
-static inline void db8500_prcmu_write(unsigned int reg, u32 value) {}
-
-static inline void db8500_prcmu_write_masked(unsigned int reg, u32 mask,
-	u32 value) {}
-
-#endif /* !CONFIG_MFD_DB8500_PRCMU */
-
-#endif /* __MFD_DB8500_PRCMU_H */
diff --git a/ANDROID_3.4.5/include/linux/mfd/dbx500-prcmu.h b/ANDROID_3.4.5/include/linux/mfd/dbx500-prcmu.h
deleted file mode 100644
index d7674eb7..00000000
--- a/ANDROID_3.4.5/include/linux/mfd/dbx500-prcmu.h
+++ /dev/null
@@ -1,915 +0,0 @@
-/*
- * Copyright (C) ST Ericsson SA 2011
- *
- * License Terms: GNU General Public License v2
- *
- * STE Ux500 PRCMU API
- */
-#ifndef __MACH_PRCMU_H
-#define __MACH_PRCMU_H
-
-#include <linux/interrupt.h>
-#include <linux/notifier.h>
-#include <linux/err.h>
-
-/* PRCMU Wakeup defines */
-enum prcmu_wakeup_index {
-	PRCMU_WAKEUP_INDEX_RTC,
-	PRCMU_WAKEUP_INDEX_RTT0,
-	PRCMU_WAKEUP_INDEX_RTT1,
-	PRCMU_WAKEUP_INDEX_HSI0,
-	PRCMU_WAKEUP_INDEX_HSI1,
-	PRCMU_WAKEUP_INDEX_USB,
-	PRCMU_WAKEUP_INDEX_ABB,
-	PRCMU_WAKEUP_INDEX_ABB_FIFO,
-	PRCMU_WAKEUP_INDEX_ARM,
-	PRCMU_WAKEUP_INDEX_CD_IRQ,
-	NUM_PRCMU_WAKEUP_INDICES
-};
-#define PRCMU_WAKEUP(_name) (BIT(PRCMU_WAKEUP_INDEX_##_name))
-
-/* EPOD (power domain) IDs */
-
-/*
- * DB8500 EPODs
- * - EPOD_ID_SVAMMDSP: power domain for SVA MMDSP
- * - EPOD_ID_SVAPIPE: power domain for SVA pipe
- * - EPOD_ID_SIAMMDSP: power domain for SIA MMDSP
- * - EPOD_ID_SIAPIPE: power domain for SIA pipe
- * - EPOD_ID_SGA: power domain for SGA
- * - EPOD_ID_B2R2_MCDE: power domain for B2R2 and MCDE
- * - EPOD_ID_ESRAM12: power domain for ESRAM 1 and 2
- * - EPOD_ID_ESRAM34: power domain for ESRAM 3 and 4
- * - NUM_EPOD_ID: number of power domains
- *
- * TODO: These should be prefixed.
- */
-#define EPOD_ID_SVAMMDSP	0
-#define EPOD_ID_SVAPIPE		1
-#define EPOD_ID_SIAMMDSP	2
-#define EPOD_ID_SIAPIPE		3
-#define EPOD_ID_SGA		4
-#define EPOD_ID_B2R2_MCDE	5
-#define EPOD_ID_ESRAM12		6
-#define EPOD_ID_ESRAM34		7
-#define NUM_EPOD_ID		8
-
-/*
- * DB5500 EPODs
- */
-#define DB5500_EPOD_ID_BASE 0x0100
-#define DB5500_EPOD_ID_SGA (DB5500_EPOD_ID_BASE + 0)
-#define DB5500_EPOD_ID_HVA (DB5500_EPOD_ID_BASE + 1)
-#define DB5500_EPOD_ID_SIA (DB5500_EPOD_ID_BASE + 2)
-#define DB5500_EPOD_ID_DISP (DB5500_EPOD_ID_BASE + 3)
-#define DB5500_EPOD_ID_ESRAM12 (DB5500_EPOD_ID_BASE + 6)
-#define DB5500_NUM_EPOD_ID 7
-
-/*
- * state definition for EPOD (power domain)
- * - EPOD_STATE_NO_CHANGE: The EPOD should remain unchanged
- * - EPOD_STATE_OFF: The EPOD is switched off
- * - EPOD_STATE_RAMRET: The EPOD is switched off with its internal RAM in
- *                         retention
- * - EPOD_STATE_ON_CLK_OFF: The EPOD is switched on, clock is still off
- * - EPOD_STATE_ON: Same as above, but with clock enabled
- */
-#define EPOD_STATE_NO_CHANGE	0x00
-#define EPOD_STATE_OFF		0x01
-#define EPOD_STATE_RAMRET	0x02
-#define EPOD_STATE_ON_CLK_OFF	0x03
-#define EPOD_STATE_ON		0x04
-
-/* DB5500 CLKOUT IDs */
-enum {
-	DB5500_CLKOUT0 = 0,
-	DB5500_CLKOUT1,
-};
-
-/* DB5500 CLKOUTx sources */
-enum {
-	DB5500_CLKOUT_REF_CLK_SEL0,
-	DB5500_CLKOUT_RTC_CLK0_SEL0,
-	DB5500_CLKOUT_ULP_CLK_SEL0,
-	DB5500_CLKOUT_STATIC0,
-	DB5500_CLKOUT_REFCLK,
-	DB5500_CLKOUT_ULPCLK,
-	DB5500_CLKOUT_ARMCLK,
-	DB5500_CLKOUT_SYSACC0CLK,
-	DB5500_CLKOUT_SOC0PLLCLK,
-	DB5500_CLKOUT_SOC1PLLCLK,
-	DB5500_CLKOUT_DDRPLLCLK,
-	DB5500_CLKOUT_TVCLK,
-	DB5500_CLKOUT_IRDACLK,
-};
-
-/*
- * CLKOUT sources
- */
-#define PRCMU_CLKSRC_CLK38M		0x00
-#define PRCMU_CLKSRC_ACLK		0x01
-#define PRCMU_CLKSRC_SYSCLK		0x02
-#define PRCMU_CLKSRC_LCDCLK		0x03
-#define PRCMU_CLKSRC_SDMMCCLK		0x04
-#define PRCMU_CLKSRC_TVCLK		0x05
-#define PRCMU_CLKSRC_TIMCLK		0x06
-#define PRCMU_CLKSRC_CLK009		0x07
-/* These are only valid for CLKOUT1: */
-#define PRCMU_CLKSRC_SIAMMDSPCLK	0x40
-#define PRCMU_CLKSRC_I2CCLK		0x41
-#define PRCMU_CLKSRC_MSP02CLK		0x42
-#define PRCMU_CLKSRC_ARMPLL_OBSCLK	0x43
-#define PRCMU_CLKSRC_HSIRXCLK		0x44
-#define PRCMU_CLKSRC_HSITXCLK		0x45
-#define PRCMU_CLKSRC_ARMCLKFIX		0x46
-#define PRCMU_CLKSRC_HDMICLK		0x47
-
-/*
- * Clock identifiers.
- */
-enum prcmu_clock {
-	PRCMU_SGACLK,
-	PRCMU_UARTCLK,
-	PRCMU_MSP02CLK,
-	PRCMU_MSP1CLK,
-	PRCMU_I2CCLK,
-	PRCMU_SDMMCCLK,
-	PRCMU_SPARE1CLK,
-	PRCMU_SLIMCLK,
-	PRCMU_PER1CLK,
-	PRCMU_PER2CLK,
-	PRCMU_PER3CLK,
-	PRCMU_PER5CLK,
-	PRCMU_PER6CLK,
-	PRCMU_PER7CLK,
-	PRCMU_LCDCLK,
-	PRCMU_BMLCLK,
-	PRCMU_HSITXCLK,
-	PRCMU_HSIRXCLK,
-	PRCMU_HDMICLK,
-	PRCMU_APEATCLK,
-	PRCMU_APETRACECLK,
-	PRCMU_MCDECLK,
-	PRCMU_IPI2CCLK,
-	PRCMU_DSIALTCLK,
-	PRCMU_DMACLK,
-	PRCMU_B2R2CLK,
-	PRCMU_TVCLK,
-	PRCMU_SSPCLK,
-	PRCMU_RNGCLK,
-	PRCMU_UICCCLK,
-	PRCMU_PWMCLK,
-	PRCMU_IRDACLK,
-	PRCMU_IRRCCLK,
-	PRCMU_SIACLK,
-	PRCMU_SVACLK,
-	PRCMU_ACLK,
-	PRCMU_NUM_REG_CLOCKS,
-	PRCMU_SYSCLK = PRCMU_NUM_REG_CLOCKS,
-	PRCMU_CDCLK,
-	PRCMU_TIMCLK,
-	PRCMU_PLLSOC0,
-	PRCMU_PLLSOC1,
-	PRCMU_PLLDDR,
-	PRCMU_PLLDSI,
-	PRCMU_DSI0CLK,
-	PRCMU_DSI1CLK,
-	PRCMU_DSI0ESCCLK,
-	PRCMU_DSI1ESCCLK,
-	PRCMU_DSI2ESCCLK,
-};
-
-/**
- * enum ape_opp - APE OPP states definition
- * @APE_OPP_INIT:
- * @APE_NO_CHANGE: The APE operating point is unchanged
- * @APE_100_OPP: The new APE operating point is ape100opp
- * @APE_50_OPP: 50%
- * @APE_50_PARTLY_25_OPP: 50%, except some clocks at 25%.
- */
-enum ape_opp {
-	APE_OPP_INIT = 0x00,
-	APE_NO_CHANGE = 0x01,
-	APE_100_OPP = 0x02,
-	APE_50_OPP = 0x03,
-	APE_50_PARTLY_25_OPP = 0xFF,
-};
-
-/**
- * enum arm_opp - ARM OPP states definition
- * @ARM_OPP_INIT:
- * @ARM_NO_CHANGE: The ARM operating point is unchanged
- * @ARM_100_OPP: The new ARM operating point is arm100opp
- * @ARM_50_OPP: The new ARM operating point is arm50opp
- * @ARM_MAX_OPP: Operating point is "max" (more than 100)
- * @ARM_MAX_FREQ100OPP: Set max opp if available, else 100
- * @ARM_EXTCLK: The new ARM operating point is armExtClk
- */
-enum arm_opp {
-	ARM_OPP_INIT = 0x00,
-	ARM_NO_CHANGE = 0x01,
-	ARM_100_OPP = 0x02,
-	ARM_50_OPP = 0x03,
-	ARM_MAX_OPP = 0x04,
-	ARM_MAX_FREQ100OPP = 0x05,
-	ARM_EXTCLK = 0x07
-};
-
-/**
- * enum ddr_opp - DDR OPP states definition
- * @DDR_100_OPP: The new DDR operating point is ddr100opp
- * @DDR_50_OPP: The new DDR operating point is ddr50opp
- * @DDR_25_OPP: The new DDR operating point is ddr25opp
- */
-enum ddr_opp {
-	DDR_100_OPP = 0x00,
-	DDR_50_OPP = 0x01,
-	DDR_25_OPP = 0x02,
-};
-
-/*
- * Definitions for controlling ESRAM0 in deep sleep.
- */
-#define ESRAM0_DEEP_SLEEP_STATE_OFF 1
-#define ESRAM0_DEEP_SLEEP_STATE_RET 2
-
-/**
- * enum ddr_pwrst - DDR power states definition
- * @DDR_PWR_STATE_UNCHANGED: SDRAM and DDR controller state is unchanged
- * @DDR_PWR_STATE_ON:
- * @DDR_PWR_STATE_OFFLOWLAT:
- * @DDR_PWR_STATE_OFFHIGHLAT:
- */
-enum ddr_pwrst {
-	DDR_PWR_STATE_UNCHANGED     = 0x00,
-	DDR_PWR_STATE_ON            = 0x01,
-	DDR_PWR_STATE_OFFLOWLAT     = 0x02,
-	DDR_PWR_STATE_OFFHIGHLAT    = 0x03
-};
-
-#include <linux/mfd/db8500-prcmu.h>
-#include <linux/mfd/db5500-prcmu.h>
-
-#if defined(CONFIG_UX500_SOC_DB8500) || defined(CONFIG_UX500_SOC_DB5500)
-
-#include <mach/id.h>
-
-static inline void __init prcmu_early_init(void)
-{
-	if (cpu_is_u5500())
-		return db5500_prcmu_early_init();
-	else
-		return db8500_prcmu_early_init();
-}
-
-static inline int prcmu_set_power_state(u8 state, bool keep_ulp_clk,
-		bool keep_ap_pll)
-{
-	if (cpu_is_u5500())
-		return db5500_prcmu_set_power_state(state, keep_ulp_clk,
-			keep_ap_pll);
-	else
-		return db8500_prcmu_set_power_state(state, keep_ulp_clk,
-			keep_ap_pll);
-}
-
-static inline u8 prcmu_get_power_state_result(void)
-{
-	if (cpu_is_u5500())
-		return -EINVAL;
-	else
-		return db8500_prcmu_get_power_state_result();
-}
-
-static inline int prcmu_gic_decouple(void)
-{
-	if (cpu_is_u5500())
-		return -EINVAL;
-	else
-		return db8500_prcmu_gic_decouple();
-}
-
-static inline int prcmu_gic_recouple(void)
-{
-	if (cpu_is_u5500())
-		return -EINVAL;
-	else
-		return db8500_prcmu_gic_recouple();
-}
-
-static inline bool prcmu_gic_pending_irq(void)
-{
-	if (cpu_is_u5500())
-		return -EINVAL;
-	else
-		return db8500_prcmu_gic_pending_irq();
-}
-
-static inline bool prcmu_is_cpu_in_wfi(int cpu)
-{
-	if (cpu_is_u5500())
-		return -EINVAL;
-	else
-		return db8500_prcmu_is_cpu_in_wfi(cpu);
-}
-
-static inline int prcmu_copy_gic_settings(void)
-{
-	if (cpu_is_u5500())
-		return -EINVAL;
-	else
-		return db8500_prcmu_copy_gic_settings();
-}
-
-static inline bool prcmu_pending_irq(void)
-{
-        if (cpu_is_u5500())
-                return -EINVAL;
-        else
-                return db8500_prcmu_pending_irq();
-}
-
-static inline int prcmu_set_epod(u16 epod_id, u8 epod_state)
-{
-	if (cpu_is_u5500())
-		return -EINVAL;
-	else
-		return db8500_prcmu_set_epod(epod_id, epod_state);
-}
-
-static inline void prcmu_enable_wakeups(u32 wakeups)
-{
-	if (cpu_is_u5500())
-		db5500_prcmu_enable_wakeups(wakeups);
-	else
-		db8500_prcmu_enable_wakeups(wakeups);
-}
-
-static inline void prcmu_disable_wakeups(void)
-{
-	prcmu_enable_wakeups(0);
-}
-
-static inline void prcmu_config_abb_event_readout(u32 abb_events)
-{
-	if (cpu_is_u5500())
-		db5500_prcmu_config_abb_event_readout(abb_events);
-	else
-		db8500_prcmu_config_abb_event_readout(abb_events);
-}
-
-static inline void prcmu_get_abb_event_buffer(void __iomem **buf)
-{
-	if (cpu_is_u5500())
-		db5500_prcmu_get_abb_event_buffer(buf);
-	else
-		db8500_prcmu_get_abb_event_buffer(buf);
-}
-
-int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size);
-int prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size);
-int prcmu_abb_write_masked(u8 slave, u8 reg, u8 *value, u8 *mask, u8 size);
-
-int prcmu_config_clkout(u8 clkout, u8 source, u8 div);
-
-static inline int prcmu_request_clock(u8 clock, bool enable)
-{
-	if (cpu_is_u5500())
-		return db5500_prcmu_request_clock(clock, enable);
-	else
-		return db8500_prcmu_request_clock(clock, enable);
-}
-
-unsigned long prcmu_clock_rate(u8 clock);
-long prcmu_round_clock_rate(u8 clock, unsigned long rate);
-int prcmu_set_clock_rate(u8 clock, unsigned long rate);
-
-static inline int prcmu_set_ddr_opp(u8 opp)
-{
-	if (cpu_is_u5500())
-		return -EINVAL;
-	else
-		return db8500_prcmu_set_ddr_opp(opp);
-}
-static inline int prcmu_get_ddr_opp(void)
-{
-	if (cpu_is_u5500())
-		return -EINVAL;
-	else
-		return db8500_prcmu_get_ddr_opp();
-}
-
-static inline int prcmu_set_arm_opp(u8 opp)
-{
-	if (cpu_is_u5500())
-		return -EINVAL;
-	else
-		return db8500_prcmu_set_arm_opp(opp);
-}
-
-static inline int prcmu_get_arm_opp(void)
-{
-	if (cpu_is_u5500())
-		return -EINVAL;
-	else
-		return db8500_prcmu_get_arm_opp();
-}
-
-static inline int prcmu_set_ape_opp(u8 opp)
-{
-	if (cpu_is_u5500())
-		return -EINVAL;
-	else
-		return db8500_prcmu_set_ape_opp(opp);
-}
-
-static inline int prcmu_get_ape_opp(void)
-{
-	if (cpu_is_u5500())
-		return -EINVAL;
-	else
-		return db8500_prcmu_get_ape_opp();
-}
-
-static inline void prcmu_system_reset(u16 reset_code)
-{
-	if (cpu_is_u5500())
-		return db5500_prcmu_system_reset(reset_code);
-	else
-		return db8500_prcmu_system_reset(reset_code);
-}
-
-static inline u16 prcmu_get_reset_code(void)
-{
-	if (cpu_is_u5500())
-		return db5500_prcmu_get_reset_code();
-	else
-		return db8500_prcmu_get_reset_code();
-}
-
-void prcmu_ac_wake_req(void);
-void prcmu_ac_sleep_req(void);
-static inline void prcmu_modem_reset(void)
-{
-	if (cpu_is_u5500())
-		return;
-	else
-		return db8500_prcmu_modem_reset();
-}
-
-static inline bool prcmu_is_ac_wake_requested(void)
-{
-	if (cpu_is_u5500())
-		return db5500_prcmu_is_ac_wake_requested();
-	else
-		return db8500_prcmu_is_ac_wake_requested();
-}
-
-static inline int prcmu_set_display_clocks(void)
-{
-	if (cpu_is_u5500())
-		return db5500_prcmu_set_display_clocks();
-	else
-		return db8500_prcmu_set_display_clocks();
-}
-
-static inline int prcmu_disable_dsipll(void)
-{
-	if (cpu_is_u5500())
-		return db5500_prcmu_disable_dsipll();
-	else
-		return db8500_prcmu_disable_dsipll();
-}
-
-static inline int prcmu_enable_dsipll(void)
-{
-	if (cpu_is_u5500())
-		return db5500_prcmu_enable_dsipll();
-	else
-		return db8500_prcmu_enable_dsipll();
-}
-
-static inline int prcmu_config_esram0_deep_sleep(u8 state)
-{
-	if (cpu_is_u5500())
-		return -EINVAL;
-	else
-		return db8500_prcmu_config_esram0_deep_sleep(state);
-}
-
-static inline int prcmu_config_hotdog(u8 threshold)
-{
-	if (cpu_is_u5500())
-		return -EINVAL;
-	else
-		return db8500_prcmu_config_hotdog(threshold);
-}
-
-static inline int prcmu_config_hotmon(u8 low, u8 high)
-{
-	if (cpu_is_u5500())
-		return -EINVAL;
-	else
-		return db8500_prcmu_config_hotmon(low, high);
-}
-
-static inline int prcmu_start_temp_sense(u16 cycles32k)
-{
-	if (cpu_is_u5500())
-		return  -EINVAL;
-	else
-		return  db8500_prcmu_start_temp_sense(cycles32k);
-}
-
-static inline int prcmu_stop_temp_sense(void)
-{
-	if (cpu_is_u5500())
-		return  -EINVAL;
-	else
-		return  db8500_prcmu_stop_temp_sense();
-}
-
-static inline u32 prcmu_read(unsigned int reg)
-{
-	if (cpu_is_u5500())
-		return -EINVAL;
-	else
-		return db8500_prcmu_read(reg);
-}
-
-static inline void prcmu_write(unsigned int reg, u32 value)
-{
-	if (cpu_is_u5500())
-		return;
-	else
-		db8500_prcmu_write(reg, value);
-}
-
-static inline void prcmu_write_masked(unsigned int reg, u32 mask, u32 value)
-{
-	if (cpu_is_u5500())
-		return;
-	else
-		db8500_prcmu_write_masked(reg, mask, value);
-}
-
-static inline int prcmu_enable_a9wdog(u8 id)
-{
-	if (cpu_is_u5500())
-		return -EINVAL;
-	else
-		return db8500_prcmu_enable_a9wdog(id);
-}
-
-static inline int prcmu_disable_a9wdog(u8 id)
-{
-	if (cpu_is_u5500())
-		return -EINVAL;
-	else
-		return db8500_prcmu_disable_a9wdog(id);
-}
-
-static inline int prcmu_kick_a9wdog(u8 id)
-{
-	if (cpu_is_u5500())
-		return -EINVAL;
-	else
-		return db8500_prcmu_kick_a9wdog(id);
-}
-
-static inline int prcmu_load_a9wdog(u8 id, u32 timeout)
-{
-	if (cpu_is_u5500())
-		return -EINVAL;
-	else
-		return db8500_prcmu_load_a9wdog(id, timeout);
-}
-
-static inline int prcmu_config_a9wdog(u8 num, bool sleep_auto_off)
-{
-	if (cpu_is_u5500())
-		return -EINVAL;
-	else
-		return db8500_prcmu_config_a9wdog(num, sleep_auto_off);
-}
-#else
-
-static inline void __init prcmu_early_init(void) {}
-
-static inline int prcmu_set_power_state(u8 state, bool keep_ulp_clk,
-	bool keep_ap_pll)
-{
-	return 0;
-}
-
-static inline int prcmu_set_epod(u16 epod_id, u8 epod_state)
-{
-	return 0;
-}
-
-static inline void prcmu_enable_wakeups(u32 wakeups) {}
-
-static inline void prcmu_disable_wakeups(void) {}
-
-static inline int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size)
-{
-	return -ENOSYS;
-}
-
-static inline int prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size)
-{
-	return -ENOSYS;
-}
-
-static inline int prcmu_abb_write_masked(u8 slave, u8 reg, u8 *value, u8 *mask,
-	u8 size)
-{
-	return -ENOSYS;
-}
-
-static inline int prcmu_config_clkout(u8 clkout, u8 source, u8 div)
-{
-	return 0;
-}
-
-static inline int prcmu_request_clock(u8 clock, bool enable)
-{
-	return 0;
-}
-
-static inline long prcmu_round_clock_rate(u8 clock, unsigned long rate)
-{
-	return 0;
-}
-
-static inline int prcmu_set_clock_rate(u8 clock, unsigned long rate)
-{
-	return 0;
-}
-
-static inline unsigned long prcmu_clock_rate(u8 clock)
-{
-	return 0;
-}
-
-static inline int prcmu_set_ape_opp(u8 opp)
-{
-	return 0;
-}
-
-static inline int prcmu_get_ape_opp(void)
-{
-	return APE_100_OPP;
-}
-
-static inline int prcmu_set_arm_opp(u8 opp)
-{
-	return 0;
-}
-
-static inline int prcmu_get_arm_opp(void)
-{
-	return ARM_100_OPP;
-}
-
-static inline int prcmu_set_ddr_opp(u8 opp)
-{
-	return 0;
-}
-
-static inline int prcmu_get_ddr_opp(void)
-{
-	return DDR_100_OPP;
-}
-
-static inline void prcmu_system_reset(u16 reset_code) {}
-
-static inline u16 prcmu_get_reset_code(void)
-{
-	return 0;
-}
-
-static inline void prcmu_ac_wake_req(void) {}
-
-static inline void prcmu_ac_sleep_req(void) {}
-
-static inline void prcmu_modem_reset(void) {}
-
-static inline bool prcmu_is_ac_wake_requested(void)
-{
-	return false;
-}
-
-static inline int prcmu_set_display_clocks(void)
-{
-	return 0;
-}
-
-static inline int prcmu_disable_dsipll(void)
-{
-	return 0;
-}
-
-static inline int prcmu_enable_dsipll(void)
-{
-	return 0;
-}
-
-static inline int prcmu_config_esram0_deep_sleep(u8 state)
-{
-	return 0;
-}
-
-static inline void prcmu_config_abb_event_readout(u32 abb_events) {}
-
-static inline void prcmu_get_abb_event_buffer(void __iomem **buf)
-{
-	*buf = NULL;
-}
-
-static inline int prcmu_config_hotdog(u8 threshold)
-{
-	return 0;
-}
-
-static inline int prcmu_config_hotmon(u8 low, u8 high)
-{
-	return 0;
-}
-
-static inline int prcmu_start_temp_sense(u16 cycles32k)
-{
-	return 0;
-}
-
-static inline int prcmu_stop_temp_sense(void)
-{
-	return 0;
-}
-
-static inline u32 prcmu_read(unsigned int reg)
-{
-	return 0;
-}
-
-static inline void prcmu_write(unsigned int reg, u32 value) {}
-
-static inline void prcmu_write_masked(unsigned int reg, u32 mask, u32 value) {}
-
-#endif
-
-static inline void prcmu_set(unsigned int reg, u32 bits)
-{
-	prcmu_write_masked(reg, bits, bits);
-}
-
-static inline void prcmu_clear(unsigned int reg, u32 bits)
-{
-	prcmu_write_masked(reg, bits, 0);
-}
-
-#if defined(CONFIG_UX500_SOC_DB8500) || defined(CONFIG_UX500_SOC_DB5500)
-
-/**
- * prcmu_enable_spi2 - Enables pin muxing for SPI2 on OtherAlternateC1.
- */
-static inline void prcmu_enable_spi2(void)
-{
-	if (cpu_is_u8500())
-		prcmu_set(DB8500_PRCM_GPIOCR, DB8500_PRCM_GPIOCR_SPI2_SELECT);
-}
-
-/**
- * prcmu_disable_spi2 - Disables pin muxing for SPI2 on OtherAlternateC1.
- */
-static inline void prcmu_disable_spi2(void)
-{
-	if (cpu_is_u8500())
-		prcmu_clear(DB8500_PRCM_GPIOCR, DB8500_PRCM_GPIOCR_SPI2_SELECT);
-}
-
-/**
- * prcmu_enable_stm_mod_uart - Enables pin muxing for STMMOD
- * and UARTMOD on OtherAlternateC3.
- */
-static inline void prcmu_enable_stm_mod_uart(void)
-{
-	if (cpu_is_u8500()) {
-		prcmu_set(DB8500_PRCM_GPIOCR,
-			(DB8500_PRCM_GPIOCR_DBG_STM_MOD_CMD1 |
-			 DB8500_PRCM_GPIOCR_DBG_UARTMOD_CMD0));
-	}
-}
-
-/**
- * prcmu_disable_stm_mod_uart - Disables pin muxing for STMMOD
- * and UARTMOD on OtherAlternateC3.
- */
-static inline void prcmu_disable_stm_mod_uart(void)
-{
-	if (cpu_is_u8500()) {
-		prcmu_clear(DB8500_PRCM_GPIOCR,
-			(DB8500_PRCM_GPIOCR_DBG_STM_MOD_CMD1 |
-			 DB8500_PRCM_GPIOCR_DBG_UARTMOD_CMD0));
-	}
-}
-
-/**
- * prcmu_enable_stm_ape - Enables pin muxing for STM APE on OtherAlternateC1.
- */
-static inline void prcmu_enable_stm_ape(void)
-{
-	if (cpu_is_u8500()) {
-		prcmu_set(DB8500_PRCM_GPIOCR,
-			DB8500_PRCM_GPIOCR_DBG_STM_APE_CMD);
-	}
-}
-
-/**
- * prcmu_disable_stm_ape - Disables pin muxing for STM APE on OtherAlternateC1.
- */
-static inline void prcmu_disable_stm_ape(void)
-{
-	if (cpu_is_u8500()) {
-		prcmu_clear(DB8500_PRCM_GPIOCR,
-			DB8500_PRCM_GPIOCR_DBG_STM_APE_CMD);
-	}
-}
-
-#else
-
-static inline void prcmu_enable_spi2(void) {}
-static inline void prcmu_disable_spi2(void) {}
-static inline void prcmu_enable_stm_mod_uart(void) {}
-static inline void prcmu_disable_stm_mod_uart(void) {}
-static inline void prcmu_enable_stm_ape(void) {}
-static inline void prcmu_disable_stm_ape(void) {}
-
-#endif
-
-/* PRCMU QoS APE OPP class */
-#define PRCMU_QOS_APE_OPP 1
-#define PRCMU_QOS_DDR_OPP 2
-#define PRCMU_QOS_ARM_OPP 3
-#define PRCMU_QOS_DEFAULT_VALUE -1
-
-#ifdef CONFIG_DBX500_PRCMU_QOS_POWER
-
-unsigned long prcmu_qos_get_cpufreq_opp_delay(void);
-void prcmu_qos_set_cpufreq_opp_delay(unsigned long);
-void prcmu_qos_force_opp(int, s32);
-int prcmu_qos_requirement(int pm_qos_class);
-int prcmu_qos_add_requirement(int pm_qos_class, char *name, s32 value);
-int prcmu_qos_update_requirement(int pm_qos_class, char *name, s32 new_value);
-void prcmu_qos_remove_requirement(int pm_qos_class, char *name);
-int prcmu_qos_add_notifier(int prcmu_qos_class,
-			   struct notifier_block *notifier);
-int prcmu_qos_remove_notifier(int prcmu_qos_class,
-			      struct notifier_block *notifier);
-
-#else
-
-static inline unsigned long prcmu_qos_get_cpufreq_opp_delay(void)
-{
-	return 0;
-}
-
-static inline void prcmu_qos_set_cpufreq_opp_delay(unsigned long n) {}
-
-static inline void prcmu_qos_force_opp(int prcmu_qos_class, s32 i) {}
-
-static inline int prcmu_qos_requirement(int prcmu_qos_class)
-{
-	return 0;
-}
-
-static inline int prcmu_qos_add_requirement(int prcmu_qos_class,
-					    char *name, s32 value)
-{
-	return 0;
-}
-
-static inline int prcmu_qos_update_requirement(int prcmu_qos_class,
-					       char *name, s32 new_value)
-{
-	return 0;
-}
-
-static inline void prcmu_qos_remove_requirement(int prcmu_qos_class, char *name)
-{
-}
-
-static inline int prcmu_qos_add_notifier(int prcmu_qos_class,
-					 struct notifier_block *notifier)
-{
-	return 0;
-}
-static inline int prcmu_qos_remove_notifier(int prcmu_qos_class,
-					    struct notifier_block *notifier)
-{
-	return 0;
-}
-
-#endif
-
-#endif /* __MACH_PRCMU_H */
diff --git a/ANDROID_3.4.5/include/linux/mfd/ds1wm.h b/ANDROID_3.4.5/include/linux/mfd/ds1wm.h
deleted file mode 100644
index 38a372a0..00000000
--- a/ANDROID_3.4.5/include/linux/mfd/ds1wm.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/* MFD cell driver data for the DS1WM driver */
-
-struct ds1wm_driver_data {
-	int active_high;
-	int clock_rate;
-	/* in milliseconds, the amount of time to */
-	/* sleep following a reset pulse. Zero    */
-	/* should work if your bus devices recover*/
-	/* time respects the 1-wire spec since the*/
-	/* ds1wm implements the precise timings of*/
-	/* a reset pulse/presence detect sequence.*/
-	unsigned int reset_recover_delay;
-};
diff --git a/ANDROID_3.4.5/include/linux/mfd/ezx-pcap.h b/ANDROID_3.4.5/include/linux/mfd/ezx-pcap.h
deleted file mode 100644
index 40c37216..00000000
--- a/ANDROID_3.4.5/include/linux/mfd/ezx-pcap.h
+++ /dev/null
@@ -1,252 +0,0 @@
-/*
- * Copyright 2009 Daniel Ribeiro <drwyrm@gmail.com>
- *
- * For further information, please see http://wiki.openezx.org/PCAP2
- */
-
-#ifndef EZX_PCAP_H
-#define EZX_PCAP_H
-
-struct pcap_subdev {
-	int id;
-	const char *name;
-	void *platform_data;
-};
-
-struct pcap_platform_data {
-	unsigned int irq_base;
-	unsigned int config;
-	void (*init) (void *);	/* board specific init */
-	int num_subdevs;
-	struct pcap_subdev *subdevs;
-};
-
-struct pcap_chip;
-
-int ezx_pcap_write(struct pcap_chip *, u8, u32);
-int ezx_pcap_read(struct pcap_chip *, u8, u32 *);
-int ezx_pcap_set_bits(struct pcap_chip *, u8, u32, u32);
-int pcap_to_irq(struct pcap_chip *, int);
-int irq_to_pcap(struct pcap_chip *, int);
-int pcap_adc_async(struct pcap_chip *, u8, u32, u8[], void *, void *);
-int pcap_adc_sync(struct pcap_chip *, u8, u32, u8[], u16[]);
-void pcap_set_ts_bits(struct pcap_chip *, u32);
-
-#define PCAP_SECOND_PORT	1
-#define PCAP_CS_AH		2
-
-#define PCAP_REGISTER_WRITE_OP_BIT	0x80000000
-#define PCAP_REGISTER_READ_OP_BIT	0x00000000
-
-#define PCAP_REGISTER_VALUE_MASK	0x01ffffff
-#define PCAP_REGISTER_ADDRESS_MASK	0x7c000000
-#define PCAP_REGISTER_ADDRESS_SHIFT	26
-#define PCAP_REGISTER_NUMBER		32
-#define PCAP_CLEAR_INTERRUPT_REGISTER	0x01ffffff
-#define PCAP_MASK_ALL_INTERRUPT		0x01ffffff
-
-/* registers accessible by both pcap ports */
-#define PCAP_REG_ISR		0x0	/* Interrupt Status */
-#define PCAP_REG_MSR		0x1	/* Interrupt Mask */
-#define PCAP_REG_PSTAT		0x2	/* Processor Status */
-#define PCAP_REG_VREG2		0x6	/* Regulator Bank 2 Control */
-#define PCAP_REG_AUXVREG	0x7	/* Auxiliary Regulator Control */
-#define PCAP_REG_BATT		0x8	/* Battery Control */
-#define PCAP_REG_ADC		0x9	/* AD Control */
-#define PCAP_REG_ADR		0xa	/* AD Result */
-#define PCAP_REG_CODEC		0xb	/* Audio Codec Control */
-#define PCAP_REG_RX_AMPS	0xc	/* RX Audio Amplifiers Control */
-#define PCAP_REG_ST_DAC		0xd	/* Stereo DAC Control */
-#define PCAP_REG_BUSCTRL	0x14	/* Connectivity Control */
-#define PCAP_REG_PERIPH		0x15	/* Peripheral Control */
-#define PCAP_REG_LOWPWR		0x18	/* Regulator Low Power Control */
-#define PCAP_REG_TX_AMPS	0x1a	/* TX Audio Amplifiers Control */
-#define PCAP_REG_GP		0x1b	/* General Purpose */
-#define PCAP_REG_TEST1		0x1c
-#define PCAP_REG_TEST2		0x1d
-#define PCAP_REG_VENDOR_TEST1	0x1e
-#define PCAP_REG_VENDOR_TEST2	0x1f
-
-/* registers accessible by pcap port 1 only (a1200, e2 & e6) */
-#define PCAP_REG_INT_SEL	0x3	/* Interrupt Select */
-#define PCAP_REG_SWCTRL		0x4	/* Switching Regulator Control */
-#define PCAP_REG_VREG1		0x5	/* Regulator Bank 1 Control */
-#define PCAP_REG_RTC_TOD	0xe	/* RTC Time of Day */
-#define PCAP_REG_RTC_TODA	0xf	/* RTC Time of Day Alarm */
-#define PCAP_REG_RTC_DAY	0x10	/* RTC Day */
-#define PCAP_REG_RTC_DAYA	0x11	/* RTC Day Alarm */
-#define PCAP_REG_MTRTMR		0x12	/* AD Monitor Timer */
-#define PCAP_REG_PWR		0x13	/* Power Control */
-#define PCAP_REG_AUXVREG_MASK	0x16	/* Auxiliary Regulator Mask */
-#define PCAP_REG_VENDOR_REV	0x17
-#define PCAP_REG_PERIPH_MASK	0x19	/* Peripheral Mask */
-
-/* PCAP2 Interrupts */
-#define PCAP_NIRQS		23
-#define PCAP_IRQ_ADCDONE	0	/* ADC done port 1 */
-#define PCAP_IRQ_TS		1	/* Touch Screen */
-#define PCAP_IRQ_1HZ		2	/* 1HZ timer */
-#define PCAP_IRQ_WH		3	/* ADC above high limit */
-#define PCAP_IRQ_WL		4	/* ADC below low limit */
-#define PCAP_IRQ_TODA		5	/* Time of day alarm */
-#define PCAP_IRQ_USB4V		6	/* USB above 4V */
-#define PCAP_IRQ_ONOFF		7	/* On/Off button */
-#define PCAP_IRQ_ONOFF2		8	/* On/Off button 2 */
-#define PCAP_IRQ_USB1V		9	/* USB above 1V */
-#define PCAP_IRQ_MOBPORT	10
-#define PCAP_IRQ_MIC		11	/* Mic attach/HS button */
-#define PCAP_IRQ_HS		12	/* Headset attach */
-#define PCAP_IRQ_ST		13
-#define PCAP_IRQ_PC		14	/* Power Cut */
-#define PCAP_IRQ_WARM		15
-#define PCAP_IRQ_EOL		16	/* Battery End Of Life */
-#define PCAP_IRQ_CLK		17
-#define PCAP_IRQ_SYSRST		18	/* System Reset */
-#define PCAP_IRQ_DUMMY		19
-#define PCAP_IRQ_ADCDONE2	20	/* ADC done port 2 */
-#define PCAP_IRQ_SOFTRESET	21
-#define PCAP_IRQ_MNEXB		22
-
-/* voltage regulators */
-#define V1		0
-#define V2		1
-#define V3		2
-#define V4		3
-#define V5		4
-#define V6		5
-#define V7		6
-#define V8		7
-#define V9		8
-#define V10		9
-#define VAUX1		10
-#define VAUX2		11
-#define VAUX3		12
-#define VAUX4		13
-#define VSIM		14
-#define VSIM2		15
-#define VVIB		16
-#define SW1		17
-#define SW2		18
-#define SW3		19
-#define SW1S		20
-#define SW2S		21
-
-#define PCAP_BATT_DAC_MASK		0x000000ff
-#define PCAP_BATT_DAC_SHIFT		0
-#define PCAP_BATT_B_FDBK		(1 << 8)
-#define PCAP_BATT_EXT_ISENSE		(1 << 9)
-#define PCAP_BATT_V_COIN_MASK		0x00003c00
-#define PCAP_BATT_V_COIN_SHIFT		10
-#define PCAP_BATT_I_COIN		(1 << 14)
-#define PCAP_BATT_COIN_CH_EN		(1 << 15)
-#define PCAP_BATT_EOL_SEL_MASK		0x000e0000
-#define PCAP_BATT_EOL_SEL_SHIFT		17
-#define PCAP_BATT_EOL_CMP_EN		(1 << 20)
-#define PCAP_BATT_BATT_DET_EN		(1 << 21)
-#define PCAP_BATT_THERMBIAS_CTRL	(1 << 22)
-
-#define PCAP_ADC_ADEN			(1 << 0)
-#define PCAP_ADC_RAND			(1 << 1)
-#define PCAP_ADC_AD_SEL1		(1 << 2)
-#define PCAP_ADC_AD_SEL2		(1 << 3)
-#define PCAP_ADC_ADA1_MASK		0x00000070
-#define PCAP_ADC_ADA1_SHIFT		4
-#define PCAP_ADC_ADA2_MASK		0x00000380
-#define PCAP_ADC_ADA2_SHIFT		7
-#define PCAP_ADC_ATO_MASK		0x00003c00
-#define PCAP_ADC_ATO_SHIFT		10
-#define PCAP_ADC_ATOX			(1 << 14)
-#define PCAP_ADC_MTR1			(1 << 15)
-#define PCAP_ADC_MTR2			(1 << 16)
-#define PCAP_ADC_TS_M_MASK		0x000e0000
-#define PCAP_ADC_TS_M_SHIFT		17
-#define PCAP_ADC_TS_REF_LOWPWR		(1 << 20)
-#define PCAP_ADC_TS_REFENB		(1 << 21)
-#define PCAP_ADC_BATT_I_POLARITY	(1 << 22)
-#define PCAP_ADC_BATT_I_ADC		(1 << 23)
-
-#define PCAP_ADC_BANK_0			0
-#define PCAP_ADC_BANK_1			1
-/* ADC bank 0 */
-#define PCAP_ADC_CH_COIN		0
-#define PCAP_ADC_CH_BATT		1
-#define PCAP_ADC_CH_BPLUS		2
-#define PCAP_ADC_CH_MOBPORTB		3
-#define PCAP_ADC_CH_TEMPERATURE		4
-#define PCAP_ADC_CH_CHARGER_ID		5
-#define PCAP_ADC_CH_AD6			6
-/* ADC bank 1 */
-#define PCAP_ADC_CH_AD7			0
-#define PCAP_ADC_CH_AD8			1
-#define PCAP_ADC_CH_AD9			2
-#define PCAP_ADC_CH_TS_X1		3
-#define PCAP_ADC_CH_TS_X2		4
-#define PCAP_ADC_CH_TS_Y1		5
-#define PCAP_ADC_CH_TS_Y2		6
-
-#define PCAP_ADC_T_NOW			0
-#define PCAP_ADC_T_IN_BURST		1
-#define PCAP_ADC_T_OUT_BURST		2
-
-#define PCAP_ADC_ATO_IN_BURST		6
-#define PCAP_ADC_ATO_OUT_BURST		0
-
-#define PCAP_ADC_TS_M_XY		1
-#define PCAP_ADC_TS_M_PRESSURE		2
-#define PCAP_ADC_TS_M_PLATE_X		3
-#define PCAP_ADC_TS_M_PLATE_Y		4
-#define PCAP_ADC_TS_M_STANDBY		5
-#define PCAP_ADC_TS_M_NONTS		6
-
-#define PCAP_ADR_ADD1_MASK		0x000003ff
-#define PCAP_ADR_ADD1_SHIFT		0
-#define PCAP_ADR_ADD2_MASK		0x000ffc00
-#define PCAP_ADR_ADD2_SHIFT		10
-#define PCAP_ADR_ADINC1			(1 << 20)
-#define PCAP_ADR_ADINC2			(1 << 21)
-#define PCAP_ADR_ASC			(1 << 22)
-#define PCAP_ADR_ONESHOT		(1 << 23)
-
-#define PCAP_BUSCTRL_FSENB		(1 << 0)
-#define PCAP_BUSCTRL_USB_SUSPEND	(1 << 1)
-#define PCAP_BUSCTRL_USB_PU		(1 << 2)
-#define PCAP_BUSCTRL_USB_PD		(1 << 3)
-#define PCAP_BUSCTRL_VUSB_EN		(1 << 4)
-#define PCAP_BUSCTRL_USB_PS		(1 << 5)
-#define PCAP_BUSCTRL_VUSB_MSTR_EN	(1 << 6)
-#define PCAP_BUSCTRL_VBUS_PD_ENB	(1 << 7)
-#define PCAP_BUSCTRL_CURRLIM		(1 << 8)
-#define PCAP_BUSCTRL_RS232ENB		(1 << 9)
-#define PCAP_BUSCTRL_RS232_DIR		(1 << 10)
-#define PCAP_BUSCTRL_SE0_CONN		(1 << 11)
-#define PCAP_BUSCTRL_USB_PDM		(1 << 12)
-#define PCAP_BUSCTRL_BUS_PRI_ADJ	(1 << 24)
-
-/* leds */
-#define PCAP_LED0		0
-#define PCAP_LED1		1
-#define PCAP_BL0		2
-#define PCAP_BL1		3
-#define PCAP_LED_3MA		0
-#define PCAP_LED_4MA		1
-#define PCAP_LED_5MA		2
-#define PCAP_LED_9MA		3
-#define PCAP_LED_T_MASK		0xf
-#define PCAP_LED_C_MASK		0x3
-#define PCAP_BL_MASK		0x1f
-#define PCAP_BL0_SHIFT		0
-#define PCAP_LED0_EN		(1 << 5)
-#define PCAP_LED1_EN		(1 << 6)
-#define PCAP_LED0_T_SHIFT	7
-#define PCAP_LED1_T_SHIFT	11
-#define PCAP_LED0_C_SHIFT	15
-#define PCAP_LED1_C_SHIFT	17
-#define PCAP_BL1_SHIFT		20
-
-/* RTC */
-#define PCAP_RTC_DAY_MASK	0x3fff
-#define PCAP_RTC_TOD_MASK	0xffff
-#define PCAP_RTC_PC_MASK	0x7
-#define SEC_PER_DAY		86400
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/mfd/htc-egpio.h b/ANDROID_3.4.5/include/linux/mfd/htc-egpio.h
deleted file mode 100644
index b4201c97..00000000
--- a/ANDROID_3.4.5/include/linux/mfd/htc-egpio.h
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- * HTC simple EGPIO irq and gpio extender
- */
-
-#ifndef __HTC_EGPIO_H__
-#define __HTC_EGPIO_H__
-
-#include <linux/gpio.h>
-
-/* Descriptive values for all-in or all-out htc_egpio_chip descriptors. */
-#define HTC_EGPIO_OUTPUT (~0)
-#define HTC_EGPIO_INPUT  0
-
-/**
- * struct htc_egpio_chip - descriptor to create gpio_chip for register range
- * @reg_start: index of first register
- * @gpio_base: gpio number of first pin in this register range
- * @num_gpios: number of gpios in this register range, max BITS_PER_LONG
- *    (number of registers = DIV_ROUND_UP(num_gpios, reg_width))
- * @direction: bitfield, '0' = input, '1' = output,
- */
-struct htc_egpio_chip {
-	int           reg_start;
-	int           gpio_base;
-	int           num_gpios;
-	unsigned long direction;
-	unsigned long initial_values;
-};
-
-/**
- * struct htc_egpio_platform_data - description provided by the arch
- * @irq_base: beginning of available IRQs (eg, IRQ_BOARD_START)
- * @num_irqs: number of irqs
- * @reg_width: number of bits per register, either 8 or 16 bit
- * @bus_width: alignment of the registers, either 16 or 32 bit
- * @invert_acks: set if chip requires writing '0' to ack an irq, instead of '1'
- * @ack_register: location of the irq/ack register
- * @chip: pointer to array of htc_egpio_chip descriptors
- * @num_chips: number of egpio chip descriptors
- */
-struct htc_egpio_platform_data {
-	int                   bus_width;
-	int                   reg_width;
-
-	int                   irq_base;
-	int                   num_irqs;
-	int                   invert_acks;
-	int                   ack_register;
-
-	struct htc_egpio_chip *chip;
-	int                   num_chips;
-};
-
-/* Determine the wakeup irq, to be called during early resume */
-extern int htc_egpio_get_wakeup_irq(struct device *dev);
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/mfd/htc-pasic3.h b/ANDROID_3.4.5/include/linux/mfd/htc-pasic3.h
deleted file mode 100644
index 3d3ed67b..00000000
--- a/ANDROID_3.4.5/include/linux/mfd/htc-pasic3.h
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- * HTC PASIC3 driver - LEDs and DS1WM
- *
- * Copyright (c) 2007 Philipp Zabel <philipp.zabel@gmail.com>
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file COPYING in the main directory of this archive for
- * more details.
- *
- */
-
-#ifndef __PASIC3_H
-#define __PASIC3_H
-
-#include <linux/platform_device.h>
-#include <linux/leds.h>
-
-extern void pasic3_write_register(struct device *dev, u32 reg, u8 val);
-extern u8 pasic3_read_register(struct device *dev, u32 reg);
-
-/*
- * mask for registers 0x20,0x21,0x22
- */
-#define PASIC3_MASK_LED0 0x04
-#define PASIC3_MASK_LED1 0x08
-#define PASIC3_MASK_LED2 0x40
-
-/*
- * bits in register 0x06
- */
-#define PASIC3_BIT2_LED0 0x08
-#define PASIC3_BIT2_LED1 0x10
-#define PASIC3_BIT2_LED2 0x20
-
-struct pasic3_led {
-	struct led_classdev         led;
-	unsigned int                hw_num;
-	unsigned int                bit2;
-	unsigned int                mask;
-	struct pasic3_leds_machinfo *pdata;
-};
-
-struct pasic3_leds_machinfo {
-	unsigned int      num_leds;
-	unsigned int      power_gpio;
-	struct pasic3_led *leds;
-};
-
-struct pasic3_platform_data {
-	struct pasic3_leds_machinfo *led_pdata;
-	unsigned int                 clock_rate;
-};
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/mfd/intel_msic.h b/ANDROID_3.4.5/include/linux/mfd/intel_msic.h
deleted file mode 100644
index 439a7a61..00000000
--- a/ANDROID_3.4.5/include/linux/mfd/intel_msic.h
+++ /dev/null
@@ -1,456 +0,0 @@
-/*
- * include/linux/mfd/intel_msic.h - Core interface for Intel MSIC
- *
- * Copyright (C) 2011, Intel Corporation
- * Author: Mika Westerberg <mika.westerberg@linux.intel.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __LINUX_MFD_INTEL_MSIC_H__
-#define __LINUX_MFD_INTEL_MSIC_H__
-
-/* ID */
-#define INTEL_MSIC_ID0			0x000	/* RO */
-#define INTEL_MSIC_ID1			0x001	/* RO */
-
-/* IRQ */
-#define INTEL_MSIC_IRQLVL1		0x002
-#define INTEL_MSIC_ADC1INT		0x003
-#define INTEL_MSIC_CCINT		0x004
-#define INTEL_MSIC_PWRSRCINT		0x005
-#define INTEL_MSIC_PWRSRCINT1		0x006
-#define INTEL_MSIC_CHRINT		0x007
-#define INTEL_MSIC_CHRINT1		0x008
-#define INTEL_MSIC_RTCIRQ		0x009
-#define INTEL_MSIC_GPIO0LVIRQ		0x00a
-#define INTEL_MSIC_GPIO1LVIRQ		0x00b
-#define INTEL_MSIC_GPIOHVIRQ		0x00c
-#define INTEL_MSIC_VRINT		0x00d
-#define INTEL_MSIC_OCAUDIO		0x00e
-#define INTEL_MSIC_ACCDET		0x00f
-#define INTEL_MSIC_RESETIRQ1		0x010
-#define INTEL_MSIC_RESETIRQ2		0x011
-#define INTEL_MSIC_MADC1INT		0x012
-#define INTEL_MSIC_MCCINT		0x013
-#define INTEL_MSIC_MPWRSRCINT		0x014
-#define INTEL_MSIC_MPWRSRCINT1		0x015
-#define INTEL_MSIC_MCHRINT		0x016
-#define INTEL_MSIC_MCHRINT1		0x017
-#define INTEL_MSIC_RTCIRQMASK		0x018
-#define INTEL_MSIC_GPIO0LVIRQMASK	0x019
-#define INTEL_MSIC_GPIO1LVIRQMASK	0x01a
-#define INTEL_MSIC_GPIOHVIRQMASK	0x01b
-#define INTEL_MSIC_VRINTMASK		0x01c
-#define INTEL_MSIC_OCAUDIOMASK		0x01d
-#define INTEL_MSIC_ACCDETMASK		0x01e
-#define INTEL_MSIC_RESETIRQ1MASK	0x01f
-#define INTEL_MSIC_RESETIRQ2MASK	0x020
-#define INTEL_MSIC_IRQLVL1MSK		0x021
-#define INTEL_MSIC_PBCONFIG		0x03e
-#define INTEL_MSIC_PBSTATUS		0x03f	/* RO */
-
-/* GPIO */
-#define INTEL_MSIC_GPIO0LV7CTLO		0x040
-#define INTEL_MSIC_GPIO0LV6CTLO		0x041
-#define INTEL_MSIC_GPIO0LV5CTLO		0x042
-#define INTEL_MSIC_GPIO0LV4CTLO		0x043
-#define INTEL_MSIC_GPIO0LV3CTLO		0x044
-#define INTEL_MSIC_GPIO0LV2CTLO		0x045
-#define INTEL_MSIC_GPIO0LV1CTLO		0x046
-#define INTEL_MSIC_GPIO0LV0CTLO		0x047
-#define INTEL_MSIC_GPIO1LV7CTLOS	0x048
-#define INTEL_MSIC_GPIO1LV6CTLO		0x049
-#define INTEL_MSIC_GPIO1LV5CTLO		0x04a
-#define INTEL_MSIC_GPIO1LV4CTLO		0x04b
-#define INTEL_MSIC_GPIO1LV3CTLO		0x04c
-#define INTEL_MSIC_GPIO1LV2CTLO		0x04d
-#define INTEL_MSIC_GPIO1LV1CTLO		0x04e
-#define INTEL_MSIC_GPIO1LV0CTLO		0x04f
-#define INTEL_MSIC_GPIO0LV7CTLI		0x050
-#define INTEL_MSIC_GPIO0LV6CTLI		0x051
-#define INTEL_MSIC_GPIO0LV5CTLI		0x052
-#define INTEL_MSIC_GPIO0LV4CTLI		0x053
-#define INTEL_MSIC_GPIO0LV3CTLI		0x054
-#define INTEL_MSIC_GPIO0LV2CTLI		0x055
-#define INTEL_MSIC_GPIO0LV1CTLI		0x056
-#define INTEL_MSIC_GPIO0LV0CTLI		0x057
-#define INTEL_MSIC_GPIO1LV7CTLIS	0x058
-#define INTEL_MSIC_GPIO1LV6CTLI		0x059
-#define INTEL_MSIC_GPIO1LV5CTLI		0x05a
-#define INTEL_MSIC_GPIO1LV4CTLI		0x05b
-#define INTEL_MSIC_GPIO1LV3CTLI		0x05c
-#define INTEL_MSIC_GPIO1LV2CTLI		0x05d
-#define INTEL_MSIC_GPIO1LV1CTLI		0x05e
-#define INTEL_MSIC_GPIO1LV0CTLI		0x05f
-#define INTEL_MSIC_PWM0CLKDIV1		0x061
-#define INTEL_MSIC_PWM0CLKDIV0		0x062
-#define INTEL_MSIC_PWM1CLKDIV1		0x063
-#define INTEL_MSIC_PWM1CLKDIV0		0x064
-#define INTEL_MSIC_PWM2CLKDIV1		0x065
-#define INTEL_MSIC_PWM2CLKDIV0		0x066
-#define INTEL_MSIC_PWM0DUTYCYCLE	0x067
-#define INTEL_MSIC_PWM1DUTYCYCLE	0x068
-#define INTEL_MSIC_PWM2DUTYCYCLE	0x069
-#define INTEL_MSIC_GPIO0HV3CTLO		0x06d
-#define INTEL_MSIC_GPIO0HV2CTLO		0x06e
-#define INTEL_MSIC_GPIO0HV1CTLO		0x06f
-#define INTEL_MSIC_GPIO0HV0CTLO		0x070
-#define INTEL_MSIC_GPIO1HV3CTLO		0x071
-#define INTEL_MSIC_GPIO1HV2CTLO		0x072
-#define INTEL_MSIC_GPIO1HV1CTLO		0x073
-#define INTEL_MSIC_GPIO1HV0CTLO		0x074
-#define INTEL_MSIC_GPIO0HV3CTLI		0x075
-#define INTEL_MSIC_GPIO0HV2CTLI		0x076
-#define INTEL_MSIC_GPIO0HV1CTLI		0x077
-#define INTEL_MSIC_GPIO0HV0CTLI		0x078
-#define INTEL_MSIC_GPIO1HV3CTLI		0x079
-#define INTEL_MSIC_GPIO1HV2CTLI		0x07a
-#define INTEL_MSIC_GPIO1HV1CTLI		0x07b
-#define INTEL_MSIC_GPIO1HV0CTLI		0x07c
-
-/* SVID */
-#define INTEL_MSIC_SVIDCTRL0		0x080
-#define INTEL_MSIC_SVIDCTRL1		0x081
-#define INTEL_MSIC_SVIDCTRL2		0x082
-#define INTEL_MSIC_SVIDTXLASTPKT3	0x083	/* RO */
-#define INTEL_MSIC_SVIDTXLASTPKT2	0x084	/* RO */
-#define INTEL_MSIC_SVIDTXLASTPKT1	0x085	/* RO */
-#define INTEL_MSIC_SVIDTXLASTPKT0	0x086	/* RO */
-#define INTEL_MSIC_SVIDPKTOUTBYTE3	0x087
-#define INTEL_MSIC_SVIDPKTOUTBYTE2	0x088
-#define INTEL_MSIC_SVIDPKTOUTBYTE1	0x089
-#define INTEL_MSIC_SVIDPKTOUTBYTE0	0x08a
-#define INTEL_MSIC_SVIDRXVPDEBUG1	0x08b
-#define INTEL_MSIC_SVIDRXVPDEBUG0	0x08c
-#define INTEL_MSIC_SVIDRXLASTPKT3	0x08d	/* RO */
-#define INTEL_MSIC_SVIDRXLASTPKT2	0x08e	/* RO */
-#define INTEL_MSIC_SVIDRXLASTPKT1	0x08f	/* RO */
-#define INTEL_MSIC_SVIDRXLASTPKT0	0x090	/* RO */
-#define INTEL_MSIC_SVIDRXCHKSTATUS3	0x091	/* RO */
-#define INTEL_MSIC_SVIDRXCHKSTATUS2	0x092	/* RO */
-#define INTEL_MSIC_SVIDRXCHKSTATUS1	0x093	/* RO */
-#define INTEL_MSIC_SVIDRXCHKSTATUS0	0x094	/* RO */
-
-/* VREG */
-#define INTEL_MSIC_VCCLATCH		0x0c0
-#define INTEL_MSIC_VNNLATCH		0x0c1
-#define INTEL_MSIC_VCCCNT		0x0c2
-#define INTEL_MSIC_SMPSRAMP		0x0c3
-#define INTEL_MSIC_VNNCNT		0x0c4
-#define INTEL_MSIC_VNNAONCNT		0x0c5
-#define INTEL_MSIC_VCC122AONCNT		0x0c6
-#define INTEL_MSIC_V180AONCNT		0x0c7
-#define INTEL_MSIC_V500CNT		0x0c8
-#define INTEL_MSIC_VIHFCNT		0x0c9
-#define INTEL_MSIC_LDORAMP1		0x0ca
-#define INTEL_MSIC_LDORAMP2		0x0cb
-#define INTEL_MSIC_VCC108AONCNT		0x0cc
-#define INTEL_MSIC_VCC108ASCNT		0x0cd
-#define INTEL_MSIC_VCC108CNT		0x0ce
-#define INTEL_MSIC_VCCA100ASCNT		0x0cf
-#define INTEL_MSIC_VCCA100CNT		0x0d0
-#define INTEL_MSIC_VCC180AONCNT		0x0d1
-#define INTEL_MSIC_VCC180CNT		0x0d2
-#define INTEL_MSIC_VCC330CNT		0x0d3
-#define INTEL_MSIC_VUSB330CNT		0x0d4
-#define INTEL_MSIC_VCCSDIOCNT		0x0d5
-#define INTEL_MSIC_VPROG1CNT		0x0d6
-#define INTEL_MSIC_VPROG2CNT		0x0d7
-#define INTEL_MSIC_VEMMCSCNT		0x0d8
-#define INTEL_MSIC_VEMMC1CNT		0x0d9
-#define INTEL_MSIC_VEMMC2CNT		0x0da
-#define INTEL_MSIC_VAUDACNT		0x0db
-#define INTEL_MSIC_VHSPCNT		0x0dc
-#define INTEL_MSIC_VHSNCNT		0x0dd
-#define INTEL_MSIC_VHDMICNT		0x0de
-#define INTEL_MSIC_VOTGCNT		0x0df
-#define INTEL_MSIC_V1P35CNT		0x0e0
-#define INTEL_MSIC_V330AONCNT		0x0e1
-
-/* RESET */
-#define INTEL_MSIC_CHIPCNTRL		0x100	/* WO */
-#define INTEL_MSIC_ERCONFIG		0x101
-
-/* BURST */
-#define INTEL_MSIC_BATCURRENTLIMIT12	0x102
-#define INTEL_MSIC_BATTIMELIMIT12	0x103
-#define INTEL_MSIC_BATTIMELIMIT3	0x104
-#define INTEL_MSIC_BATTIMEDB		0x105
-#define INTEL_MSIC_BRSTCONFIGOUTPUTS	0x106
-#define INTEL_MSIC_BRSTCONFIGACTIONS	0x107
-#define INTEL_MSIC_BURSTCONTROLSTATUS	0x108
-
-/* RTC */
-#define INTEL_MSIC_RTCB1		0x140	/* RO */
-#define INTEL_MSIC_RTCB2		0x141	/* RO */
-#define INTEL_MSIC_RTCB3		0x142	/* RO */
-#define INTEL_MSIC_RTCB4		0x143	/* RO */
-#define INTEL_MSIC_RTCOB1		0x144
-#define INTEL_MSIC_RTCOB2		0x145
-#define INTEL_MSIC_RTCOB3		0x146
-#define INTEL_MSIC_RTCOB4		0x147
-#define INTEL_MSIC_RTCAB1		0x148
-#define INTEL_MSIC_RTCAB2		0x149
-#define INTEL_MSIC_RTCAB3		0x14a
-#define INTEL_MSIC_RTCAB4		0x14b
-#define INTEL_MSIC_RTCWAB1		0x14c
-#define INTEL_MSIC_RTCWAB2		0x14d
-#define INTEL_MSIC_RTCWAB3		0x14e
-#define INTEL_MSIC_RTCWAB4		0x14f
-#define INTEL_MSIC_RTCSC1		0x150
-#define INTEL_MSIC_RTCSC2		0x151
-#define INTEL_MSIC_RTCSC3		0x152
-#define INTEL_MSIC_RTCSC4		0x153
-#define INTEL_MSIC_RTCSTATUS		0x154	/* RO */
-#define INTEL_MSIC_RTCCONFIG1		0x155
-#define INTEL_MSIC_RTCCONFIG2		0x156
-
-/* CHARGER */
-#define INTEL_MSIC_BDTIMER		0x180
-#define INTEL_MSIC_BATTRMV		0x181
-#define INTEL_MSIC_VBUSDET		0x182
-#define INTEL_MSIC_VBUSDET1		0x183
-#define INTEL_MSIC_ADPHVDET		0x184
-#define INTEL_MSIC_ADPLVDET		0x185
-#define INTEL_MSIC_ADPDETDBDM		0x186
-#define INTEL_MSIC_LOWBATTDET		0x187
-#define INTEL_MSIC_CHRCTRL		0x188
-#define INTEL_MSIC_CHRCVOLTAGE		0x189
-#define INTEL_MSIC_CHRCCURRENT		0x18a
-#define INTEL_MSIC_SPCHARGER		0x18b
-#define INTEL_MSIC_CHRTTIME		0x18c
-#define INTEL_MSIC_CHRCTRL1		0x18d
-#define INTEL_MSIC_PWRSRCLMT		0x18e
-#define INTEL_MSIC_CHRSTWDT		0x18f
-#define INTEL_MSIC_WDTWRITE		0x190	/* WO */
-#define INTEL_MSIC_CHRSAFELMT		0x191
-#define INTEL_MSIC_SPWRSRCINT		0x192	/* RO */
-#define INTEL_MSIC_SPWRSRCINT1		0x193	/* RO */
-#define INTEL_MSIC_CHRLEDPWM		0x194
-#define INTEL_MSIC_CHRLEDCTRL		0x195
-
-/* ADC */
-#define INTEL_MSIC_ADC1CNTL1		0x1c0
-#define INTEL_MSIC_ADC1CNTL2		0x1c1
-#define INTEL_MSIC_ADC1CNTL3		0x1c2
-#define INTEL_MSIC_ADC1OFFSETH		0x1c3	/* RO */
-#define INTEL_MSIC_ADC1OFFSETL		0x1c4	/* RO */
-#define INTEL_MSIC_ADC1ADDR0		0x1c5
-#define INTEL_MSIC_ADC1ADDR1		0x1c6
-#define INTEL_MSIC_ADC1ADDR2		0x1c7
-#define INTEL_MSIC_ADC1ADDR3		0x1c8
-#define INTEL_MSIC_ADC1ADDR4		0x1c9
-#define INTEL_MSIC_ADC1ADDR5		0x1ca
-#define INTEL_MSIC_ADC1ADDR6		0x1cb
-#define INTEL_MSIC_ADC1ADDR7		0x1cc
-#define INTEL_MSIC_ADC1ADDR8		0x1cd
-#define INTEL_MSIC_ADC1ADDR9		0x1ce
-#define INTEL_MSIC_ADC1ADDR10		0x1cf
-#define INTEL_MSIC_ADC1ADDR11		0x1d0
-#define INTEL_MSIC_ADC1ADDR12		0x1d1
-#define INTEL_MSIC_ADC1ADDR13		0x1d2
-#define INTEL_MSIC_ADC1ADDR14		0x1d3
-#define INTEL_MSIC_ADC1SNS0H		0x1d4	/* RO */
-#define INTEL_MSIC_ADC1SNS0L		0x1d5	/* RO */
-#define INTEL_MSIC_ADC1SNS1H		0x1d6	/* RO */
-#define INTEL_MSIC_ADC1SNS1L		0x1d7	/* RO */
-#define INTEL_MSIC_ADC1SNS2H		0x1d8	/* RO */
-#define INTEL_MSIC_ADC1SNS2L		0x1d9	/* RO */
-#define INTEL_MSIC_ADC1SNS3H		0x1da	/* RO */
-#define INTEL_MSIC_ADC1SNS3L		0x1db	/* RO */
-#define INTEL_MSIC_ADC1SNS4H		0x1dc	/* RO */
-#define INTEL_MSIC_ADC1SNS4L		0x1dd	/* RO */
-#define INTEL_MSIC_ADC1SNS5H		0x1de	/* RO */
-#define INTEL_MSIC_ADC1SNS5L		0x1df	/* RO */
-#define INTEL_MSIC_ADC1SNS6H		0x1e0	/* RO */
-#define INTEL_MSIC_ADC1SNS6L		0x1e1	/* RO */
-#define INTEL_MSIC_ADC1SNS7H		0x1e2	/* RO */
-#define INTEL_MSIC_ADC1SNS7L		0x1e3	/* RO */
-#define INTEL_MSIC_ADC1SNS8H		0x1e4	/* RO */
-#define INTEL_MSIC_ADC1SNS8L		0x1e5	/* RO */
-#define INTEL_MSIC_ADC1SNS9H		0x1e6	/* RO */
-#define INTEL_MSIC_ADC1SNS9L		0x1e7	/* RO */
-#define INTEL_MSIC_ADC1SNS10H		0x1e8	/* RO */
-#define INTEL_MSIC_ADC1SNS10L		0x1e9	/* RO */
-#define INTEL_MSIC_ADC1SNS11H		0x1ea	/* RO */
-#define INTEL_MSIC_ADC1SNS11L		0x1eb	/* RO */
-#define INTEL_MSIC_ADC1SNS12H		0x1ec	/* RO */
-#define INTEL_MSIC_ADC1SNS12L		0x1ed	/* RO */
-#define INTEL_MSIC_ADC1SNS13H		0x1ee	/* RO */
-#define INTEL_MSIC_ADC1SNS13L		0x1ef	/* RO */
-#define INTEL_MSIC_ADC1SNS14H		0x1f0	/* RO */
-#define INTEL_MSIC_ADC1SNS14L		0x1f1	/* RO */
-#define INTEL_MSIC_ADC1BV0H		0x1f2	/* RO */
-#define INTEL_MSIC_ADC1BV0L		0x1f3	/* RO */
-#define INTEL_MSIC_ADC1BV1H		0x1f4	/* RO */
-#define INTEL_MSIC_ADC1BV1L		0x1f5	/* RO */
-#define INTEL_MSIC_ADC1BV2H		0x1f6	/* RO */
-#define INTEL_MSIC_ADC1BV2L		0x1f7	/* RO */
-#define INTEL_MSIC_ADC1BV3H		0x1f8	/* RO */
-#define INTEL_MSIC_ADC1BV3L		0x1f9	/* RO */
-#define INTEL_MSIC_ADC1BI0H		0x1fa	/* RO */
-#define INTEL_MSIC_ADC1BI0L		0x1fb	/* RO */
-#define INTEL_MSIC_ADC1BI1H		0x1fc	/* RO */
-#define INTEL_MSIC_ADC1BI1L		0x1fd	/* RO */
-#define INTEL_MSIC_ADC1BI2H		0x1fe	/* RO */
-#define INTEL_MSIC_ADC1BI2L		0x1ff	/* RO */
-#define INTEL_MSIC_ADC1BI3H		0x200	/* RO */
-#define INTEL_MSIC_ADC1BI3L		0x201	/* RO */
-#define INTEL_MSIC_CCCNTL		0x202
-#define INTEL_MSIC_CCOFFSETH		0x203	/* RO */
-#define INTEL_MSIC_CCOFFSETL		0x204	/* RO */
-#define INTEL_MSIC_CCADCHA		0x205	/* RO */
-#define INTEL_MSIC_CCADCLA		0x206	/* RO */
-
-/* AUDIO */
-#define INTEL_MSIC_AUDPLLCTRL		0x240
-#define INTEL_MSIC_DMICBUF0123		0x241
-#define INTEL_MSIC_DMICBUF45		0x242
-#define INTEL_MSIC_DMICGPO		0x244
-#define INTEL_MSIC_DMICMUX		0x245
-#define INTEL_MSIC_DMICCLK		0x246
-#define INTEL_MSIC_MICBIAS		0x247
-#define INTEL_MSIC_ADCCONFIG		0x248
-#define INTEL_MSIC_MICAMP1		0x249
-#define INTEL_MSIC_MICAMP2		0x24a
-#define INTEL_MSIC_NOISEMUX		0x24b
-#define INTEL_MSIC_AUDIOMUX12		0x24c
-#define INTEL_MSIC_AUDIOMUX34		0x24d
-#define INTEL_MSIC_AUDIOSINC		0x24e
-#define INTEL_MSIC_AUDIOTXEN		0x24f
-#define INTEL_MSIC_HSEPRXCTRL		0x250
-#define INTEL_MSIC_IHFRXCTRL		0x251
-#define INTEL_MSIC_VOICETXVOL		0x252
-#define INTEL_MSIC_SIDETONEVOL		0x253
-#define INTEL_MSIC_MUSICSHARVOL		0x254
-#define INTEL_MSIC_VOICETXCTRL		0x255
-#define INTEL_MSIC_HSMIXER		0x256
-#define INTEL_MSIC_DACCONFIG		0x257
-#define INTEL_MSIC_SOFTMUTE		0x258
-#define INTEL_MSIC_HSLVOLCTRL		0x259
-#define INTEL_MSIC_HSRVOLCTRL		0x25a
-#define INTEL_MSIC_IHFLVOLCTRL		0x25b
-#define INTEL_MSIC_IHFRVOLCTRL		0x25c
-#define INTEL_MSIC_DRIVEREN		0x25d
-#define INTEL_MSIC_LINEOUTCTRL		0x25e
-#define INTEL_MSIC_VIB1CTRL1		0x25f
-#define INTEL_MSIC_VIB1CTRL2		0x260
-#define INTEL_MSIC_VIB1CTRL3		0x261
-#define INTEL_MSIC_VIB1SPIPCM_1		0x262
-#define INTEL_MSIC_VIB1SPIPCM_2		0x263
-#define INTEL_MSIC_VIB1CTRL5		0x264
-#define INTEL_MSIC_VIB2CTRL1		0x265
-#define INTEL_MSIC_VIB2CTRL2		0x266
-#define INTEL_MSIC_VIB2CTRL3		0x267
-#define INTEL_MSIC_VIB2SPIPCM_1		0x268
-#define INTEL_MSIC_VIB2SPIPCM_2		0x269
-#define INTEL_MSIC_VIB2CTRL5		0x26a
-#define INTEL_MSIC_BTNCTRL1		0x26b
-#define INTEL_MSIC_BTNCTRL2		0x26c
-#define INTEL_MSIC_PCM1TXSLOT01		0x26d
-#define INTEL_MSIC_PCM1TXSLOT23		0x26e
-#define INTEL_MSIC_PCM1TXSLOT45		0x26f
-#define INTEL_MSIC_PCM1RXSLOT0123	0x270
-#define INTEL_MSIC_PCM1RXSLOT045	0x271
-#define INTEL_MSIC_PCM2TXSLOT01		0x272
-#define INTEL_MSIC_PCM2TXSLOT23		0x273
-#define INTEL_MSIC_PCM2TXSLOT45		0x274
-#define INTEL_MSIC_PCM2RXSLOT01		0x275
-#define INTEL_MSIC_PCM2RXSLOT23		0x276
-#define INTEL_MSIC_PCM2RXSLOT45		0x277
-#define INTEL_MSIC_PCM1CTRL1		0x278
-#define INTEL_MSIC_PCM1CTRL2		0x279
-#define INTEL_MSIC_PCM1CTRL3		0x27a
-#define INTEL_MSIC_PCM2CTRL1		0x27b
-#define INTEL_MSIC_PCM2CTRL2		0x27c
-
-/* HDMI */
-#define INTEL_MSIC_HDMIPUEN		0x280
-#define INTEL_MSIC_HDMISTATUS		0x281	/* RO */
-
-/* Physical address of the start of the MSIC interrupt tree in SRAM */
-#define INTEL_MSIC_IRQ_PHYS_BASE	0xffff7fc0
-
-/**
- * struct intel_msic_gpio_pdata - platform data for the MSIC GPIO driver
- * @gpio_base: base number for the GPIOs
- */
-struct intel_msic_gpio_pdata {
-	unsigned	gpio_base;
-};
-
-/**
- * struct intel_msic_ocd_pdata - platform data for the MSIC OCD driver
- * @gpio: GPIO number used for OCD interrupts
- *
- * The MSIC MFD driver converts @gpio into an IRQ number and passes it to
- * the OCD driver as %IORESOURCE_IRQ.
- */
-struct intel_msic_ocd_pdata {
-	unsigned	gpio;
-};
-
-/* MSIC embedded blocks (subdevices) */
-enum intel_msic_block {
-	INTEL_MSIC_BLOCK_TOUCH,
-	INTEL_MSIC_BLOCK_ADC,
-	INTEL_MSIC_BLOCK_BATTERY,
-	INTEL_MSIC_BLOCK_GPIO,
-	INTEL_MSIC_BLOCK_AUDIO,
-	INTEL_MSIC_BLOCK_HDMI,
-	INTEL_MSIC_BLOCK_THERMAL,
-	INTEL_MSIC_BLOCK_POWER_BTN,
-	INTEL_MSIC_BLOCK_OCD,
-
-	INTEL_MSIC_BLOCK_LAST,
-};
-
-/**
- * struct intel_msic_platform_data - platform data for the MSIC driver
- * @irq: array of interrupt numbers, one per device. If @irq is set to %0
- *	 for a given block, the corresponding platform device is not
- *	 created. For devices which don't have an interrupt, use %0xff
- *	 (this is same as in SFI spec).
- * @gpio: platform data for the MSIC GPIO driver
- * @ocd: platform data for the MSIC OCD driver
- *
- * Once the MSIC driver is initialized, the register interface is ready to
- * use. All the platform devices for subdevices are created after the
- * register interface is ready so that we can guarantee its availability to
- * the subdevice drivers.
- *
- * Interrupt numbers are passed to the subdevices via %IORESOURCE_IRQ
- * resources of the created platform device.
- */
-struct intel_msic_platform_data {
-	int				irq[INTEL_MSIC_BLOCK_LAST];
-	struct intel_msic_gpio_pdata	*gpio;
-	struct intel_msic_ocd_pdata	*ocd;
-};
-
-struct intel_msic;
-
-extern int intel_msic_reg_read(unsigned short reg, u8 *val);
-extern int intel_msic_reg_write(unsigned short reg, u8 val);
-extern int intel_msic_reg_update(unsigned short reg, u8 val, u8 mask);
-extern int intel_msic_bulk_read(unsigned short *reg, u8 *buf, size_t count);
-extern int intel_msic_bulk_write(unsigned short *reg, u8 *buf, size_t count);
-
-/*
- * pdev_to_intel_msic - gets an MSIC instance from the platform device
- * @pdev: platform device pointer
- *
- * The client drivers need to have pointer to the MSIC instance if they
- * want to call intel_msic_irq_read(). This macro can be used for
- * convenience to get the MSIC pointer from @pdev where needed. This is
- * _only_ valid for devices which are managed by the MSIC.
- */
-#define pdev_to_intel_msic(pdev)	(dev_get_drvdata(pdev->dev.parent))
-
-extern int intel_msic_irq_read(struct intel_msic *msic, unsigned short reg,
-			       u8 *val);
-
-#endif /* __LINUX_MFD_INTEL_MSIC_H__ */
diff --git a/ANDROID_3.4.5/include/linux/mfd/janz.h b/ANDROID_3.4.5/include/linux/mfd/janz.h
deleted file mode 100644
index e9994c46..00000000
--- a/ANDROID_3.4.5/include/linux/mfd/janz.h
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- * Common Definitions for Janz MODULbus devices
- *
- * Copyright (c) 2010 Ira W. Snyder <iws@ovro.caltech.edu>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#ifndef JANZ_H
-#define JANZ_H
-
-struct janz_platform_data {
-	/* MODULbus Module Number */
-	unsigned int modno;
-};
-
-/* PLX bridge chip onboard registers */
-struct janz_cmodio_onboard_regs {
-	u8 unused1;
-
-	/*
-	 * Read access: interrupt status
-	 * Write access: interrupt disable
-	 */
-	u8 int_disable;
-	u8 unused2;
-
-	/*
-	 * Read access: MODULbus number (hex switch)
-	 * Write access: interrupt enable
-	 */
-	u8 int_enable;
-	u8 unused3;
-
-	/* write-only */
-	u8 reset_assert;
-	u8 unused4;
-
-	/* write-only */
-	u8 reset_deassert;
-	u8 unused5;
-
-	/* read-write access to serial EEPROM */
-	u8 eep;
-	u8 unused6;
-
-	/* write-only access to EEPROM chip select */
-	u8 enid;
-};
-
-#endif /* JANZ_H */
diff --git a/ANDROID_3.4.5/include/linux/mfd/max8925.h b/ANDROID_3.4.5/include/linux/mfd/max8925.h
deleted file mode 100644
index 15b2392a..00000000
--- a/ANDROID_3.4.5/include/linux/mfd/max8925.h
+++ /dev/null
@@ -1,256 +0,0 @@
-/*
- * Maxim8925 Interface
- *
- * Copyright (C) 2009 Marvell International Ltd.
- *	Haojian Zhuang <haojian.zhuang@marvell.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __LINUX_MFD_MAX8925_H
-#define __LINUX_MFD_MAX8925_H
-
-#include <linux/mutex.h>
-#include <linux/interrupt.h>
-
-/* Unified sub device IDs for MAX8925 */
-enum {
-	MAX8925_ID_SD1,
-	MAX8925_ID_SD2,
-	MAX8925_ID_SD3,
-	MAX8925_ID_LDO1,
-	MAX8925_ID_LDO2,
-	MAX8925_ID_LDO3,
-	MAX8925_ID_LDO4,
-	MAX8925_ID_LDO5,
-	MAX8925_ID_LDO6,
-	MAX8925_ID_LDO7,
-	MAX8925_ID_LDO8,
-	MAX8925_ID_LDO9,
-	MAX8925_ID_LDO10,
-	MAX8925_ID_LDO11,
-	MAX8925_ID_LDO12,
-	MAX8925_ID_LDO13,
-	MAX8925_ID_LDO14,
-	MAX8925_ID_LDO15,
-	MAX8925_ID_LDO16,
-	MAX8925_ID_LDO17,
-	MAX8925_ID_LDO18,
-	MAX8925_ID_LDO19,
-	MAX8925_ID_LDO20,
-	MAX8925_ID_MAX,
-};
-
-enum {
-	/*
-	 * Charging current threshold trigger going from fast charge
-	 * to TOPOFF charge. From 5% to 20% of fasting charging current.
-	 */
-	MAX8925_TOPOFF_THR_5PER,
-	MAX8925_TOPOFF_THR_10PER,
-	MAX8925_TOPOFF_THR_15PER,
-	MAX8925_TOPOFF_THR_20PER,
-};
-
-enum {
-	/* Fast charging current */
-	MAX8925_FCHG_85MA,
-	MAX8925_FCHG_300MA,
-	MAX8925_FCHG_460MA,
-	MAX8925_FCHG_600MA,
-	MAX8925_FCHG_700MA,
-	MAX8925_FCHG_800MA,
-	MAX8925_FCHG_900MA,
-	MAX8925_FCHG_1000MA,
-};
-
-/* Charger registers */
-#define MAX8925_CHG_IRQ1		(0x7e)
-#define MAX8925_CHG_IRQ2		(0x7f)
-#define MAX8925_CHG_IRQ1_MASK		(0x80)
-#define MAX8925_CHG_IRQ2_MASK		(0x81)
-#define MAX8925_CHG_STATUS		(0x82)
-
-/* GPM registers */
-#define MAX8925_SYSENSEL		(0x00)
-#define MAX8925_ON_OFF_IRQ1		(0x01)
-#define MAX8925_ON_OFF_IRQ1_MASK	(0x02)
-#define MAX8925_ON_OFF_STATUS		(0x03)
-#define MAX8925_ON_OFF_IRQ2		(0x0d)
-#define MAX8925_ON_OFF_IRQ2_MASK	(0x0e)
-#define MAX8925_RESET_CNFG		(0x0f)
-
-/* Touch registers */
-#define MAX8925_TSC_IRQ			(0x00)
-#define MAX8925_TSC_IRQ_MASK		(0x01)
-#define MAX8925_TSC_CNFG1		(0x02)
-#define MAX8925_ADC_SCHED		(0x10)
-#define MAX8925_ADC_RES_END		(0x6f)
-
-#define MAX8925_NREF_OK			(1 << 4)
-
-/* RTC registers */
-#define MAX8925_ALARM0_CNTL		(0x18)
-#define MAX8925_ALARM1_CNTL		(0x19)
-#define MAX8925_RTC_IRQ			(0x1c)
-#define MAX8925_RTC_IRQ_MASK		(0x1d)
-#define MAX8925_MPL_CNTL		(0x1e)
-
-/* WLED registers */
-#define MAX8925_WLED_MODE_CNTL		(0x84)
-#define MAX8925_WLED_CNTL		(0x85)
-
-/* MAX8925 Registers */
-#define MAX8925_SDCTL1			(0x04)
-#define MAX8925_SDCTL2			(0x07)
-#define MAX8925_SDCTL3			(0x0A)
-#define MAX8925_SDV1			(0x06)
-#define MAX8925_SDV2			(0x09)
-#define MAX8925_SDV3			(0x0C)
-#define MAX8925_LDOCTL1			(0x18)
-#define MAX8925_LDOCTL2			(0x1C)
-#define MAX8925_LDOCTL3			(0x20)
-#define MAX8925_LDOCTL4			(0x24)
-#define MAX8925_LDOCTL5			(0x28)
-#define MAX8925_LDOCTL6			(0x2C)
-#define MAX8925_LDOCTL7			(0x30)
-#define MAX8925_LDOCTL8			(0x34)
-#define MAX8925_LDOCTL9			(0x38)
-#define MAX8925_LDOCTL10		(0x3C)
-#define MAX8925_LDOCTL11		(0x40)
-#define MAX8925_LDOCTL12		(0x44)
-#define MAX8925_LDOCTL13		(0x48)
-#define MAX8925_LDOCTL14		(0x4C)
-#define MAX8925_LDOCTL15		(0x50)
-#define MAX8925_LDOCTL16		(0x10)
-#define MAX8925_LDOCTL17		(0x14)
-#define MAX8925_LDOCTL18		(0x72)
-#define MAX8925_LDOCTL19		(0x5C)
-#define MAX8925_LDOCTL20		(0x9C)
-#define MAX8925_LDOVOUT1		(0x1A)
-#define MAX8925_LDOVOUT2		(0x1E)
-#define MAX8925_LDOVOUT3		(0x22)
-#define MAX8925_LDOVOUT4		(0x26)
-#define MAX8925_LDOVOUT5		(0x2A)
-#define MAX8925_LDOVOUT6		(0x2E)
-#define MAX8925_LDOVOUT7		(0x32)
-#define MAX8925_LDOVOUT8		(0x36)
-#define MAX8925_LDOVOUT9		(0x3A)
-#define MAX8925_LDOVOUT10		(0x3E)
-#define MAX8925_LDOVOUT11		(0x42)
-#define MAX8925_LDOVOUT12		(0x46)
-#define MAX8925_LDOVOUT13		(0x4A)
-#define MAX8925_LDOVOUT14		(0x4E)
-#define MAX8925_LDOVOUT15		(0x52)
-#define MAX8925_LDOVOUT16		(0x12)
-#define MAX8925_LDOVOUT17		(0x16)
-#define MAX8925_LDOVOUT18		(0x74)
-#define MAX8925_LDOVOUT19		(0x5E)
-#define MAX8925_LDOVOUT20		(0x9E)
-
-/* bit definitions */
-#define CHG_IRQ1_MASK			(0x07)
-#define CHG_IRQ2_MASK			(0xff)
-#define ON_OFF_IRQ1_MASK		(0xff)
-#define ON_OFF_IRQ2_MASK		(0x03)
-#define TSC_IRQ_MASK			(0x03)
-#define RTC_IRQ_MASK			(0x0c)
-
-#define MAX8925_MAX_REGULATOR		(23)
-
-#define MAX8925_NAME_SIZE		(32)
-
-/* IRQ definitions */
-enum {
-	MAX8925_IRQ_VCHG_DC_OVP,
-	MAX8925_IRQ_VCHG_DC_F,
-	MAX8925_IRQ_VCHG_DC_R,
-	MAX8925_IRQ_VCHG_THM_OK_R,
-	MAX8925_IRQ_VCHG_THM_OK_F,
-	MAX8925_IRQ_VCHG_SYSLOW_F,
-	MAX8925_IRQ_VCHG_SYSLOW_R,
-	MAX8925_IRQ_VCHG_RST,
-	MAX8925_IRQ_VCHG_DONE,
-	MAX8925_IRQ_VCHG_TOPOFF,
-	MAX8925_IRQ_VCHG_TMR_FAULT,
-	MAX8925_IRQ_GPM_RSTIN,
-	MAX8925_IRQ_GPM_MPL,
-	MAX8925_IRQ_GPM_SW_3SEC,
-	MAX8925_IRQ_GPM_EXTON_F,
-	MAX8925_IRQ_GPM_EXTON_R,
-	MAX8925_IRQ_GPM_SW_1SEC,
-	MAX8925_IRQ_GPM_SW_F,
-	MAX8925_IRQ_GPM_SW_R,
-	MAX8925_IRQ_GPM_SYSCKEN_F,
-	MAX8925_IRQ_GPM_SYSCKEN_R,
-	MAX8925_IRQ_RTC_ALARM1,
-	MAX8925_IRQ_RTC_ALARM0,
-	MAX8925_IRQ_TSC_STICK,
-	MAX8925_IRQ_TSC_NSTICK,
-	MAX8925_NR_IRQS,
-};
-
-struct max8925_chip {
-	struct device		*dev;
-	struct i2c_client	*i2c;
-	struct i2c_client	*adc;
-	struct i2c_client	*rtc;
-	struct mutex		io_lock;
-	struct mutex		irq_lock;
-
-	int			irq_base;
-	int			core_irq;
-	int			tsc_irq;
-
-	unsigned int            wakeup_flag;
-};
-
-struct max8925_backlight_pdata {
-	int	lxw_scl;	/* 0/1 -- 0.8Ohm/0.4Ohm */
-	int	lxw_freq;	/* 700KHz ~ 1400KHz */
-	int	dual_string;	/* 0/1 -- single/dual string */
-};
-
-struct max8925_touch_pdata {
-	unsigned int		flags;
-};
-
-struct max8925_power_pdata {
-	int		(*set_charger)(int);
-	unsigned	batt_detect:1;
-	unsigned	topoff_threshold:2;
-	unsigned	fast_charge:3;	/* charge current */
-	unsigned	no_temp_support:1; /* set if no temperature detect */
-	unsigned	no_insert_detect:1; /* set if no ac insert detect */
-	char		**supplied_to;
-	int		num_supplicants;
-};
-
-/*
- * irq_base: stores IRQ base number of MAX8925 in platform
- * tsc_irq: stores IRQ number of MAX8925 TSC
- */
-struct max8925_platform_data {
-	struct max8925_backlight_pdata	*backlight;
-	struct max8925_touch_pdata	*touch;
-	struct max8925_power_pdata	*power;
-	struct regulator_init_data	*regulator[MAX8925_MAX_REGULATOR];
-
-	int		irq_base;
-	int		tsc_irq;
-};
-
-extern int max8925_reg_read(struct i2c_client *, int);
-extern int max8925_reg_write(struct i2c_client *, int, unsigned char);
-extern int max8925_bulk_read(struct i2c_client *, int, int, unsigned char *);
-extern int max8925_bulk_write(struct i2c_client *, int, int, unsigned char *);
-extern int max8925_set_bits(struct i2c_client *, int, unsigned char,
-			unsigned char);
-
-extern int max8925_device_init(struct max8925_chip *,
-				struct max8925_platform_data *);
-extern void max8925_device_exit(struct max8925_chip *);
-#endif /* __LINUX_MFD_MAX8925_H */
-
diff --git a/ANDROID_3.4.5/include/linux/mfd/max8997-private.h b/ANDROID_3.4.5/include/linux/mfd/max8997-private.h
deleted file mode 100644
index 3f4deb62..00000000
--- a/ANDROID_3.4.5/include/linux/mfd/max8997-private.h
+++ /dev/null
@@ -1,363 +0,0 @@
-/*
- * max8997.h - Voltage regulator driver for the Maxim 8997
- *
- *  Copyright (C) 2010 Samsung Electrnoics
- *  MyungJoo Ham <myungjoo.ham@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __LINUX_MFD_MAX8997_PRIV_H
-#define __LINUX_MFD_MAX8997_PRIV_H
-
-#include <linux/i2c.h>
-
-#define MAX8997_REG_INVALID	(0xff)
-
-enum max8997_pmic_reg {
-	MAX8997_REG_PMIC_ID0	= 0x00,
-	MAX8997_REG_PMIC_ID1	= 0x01,
-	MAX8997_REG_INTSRC	= 0x02,
-	MAX8997_REG_INT1	= 0x03,
-	MAX8997_REG_INT2	= 0x04,
-	MAX8997_REG_INT3	= 0x05,
-	MAX8997_REG_INT4	= 0x06,
-
-	MAX8997_REG_INT1MSK	= 0x08,
-	MAX8997_REG_INT2MSK	= 0x09,
-	MAX8997_REG_INT3MSK	= 0x0a,
-	MAX8997_REG_INT4MSK	= 0x0b,
-
-	MAX8997_REG_STATUS1	= 0x0d,
-	MAX8997_REG_STATUS2	= 0x0e,
-	MAX8997_REG_STATUS3	= 0x0f,
-	MAX8997_REG_STATUS4	= 0x10,
-
-	MAX8997_REG_MAINCON1	= 0x13,
-	MAX8997_REG_MAINCON2	= 0x14,
-	MAX8997_REG_BUCKRAMP	= 0x15,
-
-	MAX8997_REG_BUCK1CTRL	= 0x18,
-	MAX8997_REG_BUCK1DVS1	= 0x19,
-	MAX8997_REG_BUCK1DVS2	= 0x1a,
-	MAX8997_REG_BUCK1DVS3	= 0x1b,
-	MAX8997_REG_BUCK1DVS4	= 0x1c,
-	MAX8997_REG_BUCK1DVS5	= 0x1d,
-	MAX8997_REG_BUCK1DVS6	= 0x1e,
-	MAX8997_REG_BUCK1DVS7	= 0x1f,
-	MAX8997_REG_BUCK1DVS8	= 0x20,
-	MAX8997_REG_BUCK2CTRL	= 0x21,
-	MAX8997_REG_BUCK2DVS1	= 0x22,
-	MAX8997_REG_BUCK2DVS2	= 0x23,
-	MAX8997_REG_BUCK2DVS3	= 0x24,
-	MAX8997_REG_BUCK2DVS4	= 0x25,
-	MAX8997_REG_BUCK2DVS5	= 0x26,
-	MAX8997_REG_BUCK2DVS6	= 0x27,
-	MAX8997_REG_BUCK2DVS7	= 0x28,
-	MAX8997_REG_BUCK2DVS8	= 0x29,
-	MAX8997_REG_BUCK3CTRL	= 0x2a,
-	MAX8997_REG_BUCK3DVS	= 0x2b,
-	MAX8997_REG_BUCK4CTRL	= 0x2c,
-	MAX8997_REG_BUCK4DVS	= 0x2d,
-	MAX8997_REG_BUCK5CTRL	= 0x2e,
-	MAX8997_REG_BUCK5DVS1	= 0x2f,
-	MAX8997_REG_BUCK5DVS2	= 0x30,
-	MAX8997_REG_BUCK5DVS3	= 0x31,
-	MAX8997_REG_BUCK5DVS4	= 0x32,
-	MAX8997_REG_BUCK5DVS5	= 0x33,
-	MAX8997_REG_BUCK5DVS6	= 0x34,
-	MAX8997_REG_BUCK5DVS7	= 0x35,
-	MAX8997_REG_BUCK5DVS8	= 0x36,
-	MAX8997_REG_BUCK6CTRL	= 0x37,
-	MAX8997_REG_BUCK6BPSKIPCTRL	= 0x38,
-	MAX8997_REG_BUCK7CTRL	= 0x39,
-	MAX8997_REG_BUCK7DVS	= 0x3a,
-	MAX8997_REG_LDO1CTRL	= 0x3b,
-	MAX8997_REG_LDO2CTRL	= 0x3c,
-	MAX8997_REG_LDO3CTRL	= 0x3d,
-	MAX8997_REG_LDO4CTRL	= 0x3e,
-	MAX8997_REG_LDO5CTRL	= 0x3f,
-	MAX8997_REG_LDO6CTRL	= 0x40,
-	MAX8997_REG_LDO7CTRL	= 0x41,
-	MAX8997_REG_LDO8CTRL	= 0x42,
-	MAX8997_REG_LDO9CTRL	= 0x43,
-	MAX8997_REG_LDO10CTRL	= 0x44,
-	MAX8997_REG_LDO11CTRL	= 0x45,
-	MAX8997_REG_LDO12CTRL	= 0x46,
-	MAX8997_REG_LDO13CTRL	= 0x47,
-	MAX8997_REG_LDO14CTRL	= 0x48,
-	MAX8997_REG_LDO15CTRL	= 0x49,
-	MAX8997_REG_LDO16CTRL	= 0x4a,
-	MAX8997_REG_LDO17CTRL	= 0x4b,
-	MAX8997_REG_LDO18CTRL	= 0x4c,
-	MAX8997_REG_LDO21CTRL	= 0x4d,
-
-	MAX8997_REG_MBCCTRL1	= 0x50,
-	MAX8997_REG_MBCCTRL2	= 0x51,
-	MAX8997_REG_MBCCTRL3	= 0x52,
-	MAX8997_REG_MBCCTRL4	= 0x53,
-	MAX8997_REG_MBCCTRL5	= 0x54,
-	MAX8997_REG_MBCCTRL6	= 0x55,
-	MAX8997_REG_OTPCGHCVS	= 0x56,
-
-	MAX8997_REG_SAFEOUTCTRL	= 0x5a,
-
-	MAX8997_REG_LBCNFG1	= 0x5e,
-	MAX8997_REG_LBCNFG2	= 0x5f,
-	MAX8997_REG_BBCCTRL	= 0x60,
-
-	MAX8997_REG_FLASH1_CUR	= 0x63, /* 0x63 ~ 0x6e for FLASH */
-	MAX8997_REG_FLASH2_CUR	= 0x64,
-	MAX8997_REG_MOVIE_CUR	= 0x65,
-	MAX8997_REG_GSMB_CUR	= 0x66,
-	MAX8997_REG_BOOST_CNTL	= 0x67,
-	MAX8997_REG_LEN_CNTL	= 0x68,
-	MAX8997_REG_FLASH_CNTL	= 0x69,
-	MAX8997_REG_WDT_CNTL	= 0x6a,
-	MAX8997_REG_MAXFLASH1	= 0x6b,
-	MAX8997_REG_MAXFLASH2	= 0x6c,
-	MAX8997_REG_FLASHSTATUS	= 0x6d,
-	MAX8997_REG_FLASHSTATUSMASK	= 0x6e,
-
-	MAX8997_REG_GPIOCNTL1	= 0x70,
-	MAX8997_REG_GPIOCNTL2	= 0x71,
-	MAX8997_REG_GPIOCNTL3	= 0x72,
-	MAX8997_REG_GPIOCNTL4	= 0x73,
-	MAX8997_REG_GPIOCNTL5	= 0x74,
-	MAX8997_REG_GPIOCNTL6	= 0x75,
-	MAX8997_REG_GPIOCNTL7	= 0x76,
-	MAX8997_REG_GPIOCNTL8	= 0x77,
-	MAX8997_REG_GPIOCNTL9	= 0x78,
-	MAX8997_REG_GPIOCNTL10	= 0x79,
-	MAX8997_REG_GPIOCNTL11	= 0x7a,
-	MAX8997_REG_GPIOCNTL12	= 0x7b,
-
-	MAX8997_REG_LDO1CONFIG	= 0x80,
-	MAX8997_REG_LDO2CONFIG	= 0x81,
-	MAX8997_REG_LDO3CONFIG	= 0x82,
-	MAX8997_REG_LDO4CONFIG	= 0x83,
-	MAX8997_REG_LDO5CONFIG	= 0x84,
-	MAX8997_REG_LDO6CONFIG	= 0x85,
-	MAX8997_REG_LDO7CONFIG	= 0x86,
-	MAX8997_REG_LDO8CONFIG	= 0x87,
-	MAX8997_REG_LDO9CONFIG	= 0x88,
-	MAX8997_REG_LDO10CONFIG	= 0x89,
-	MAX8997_REG_LDO11CONFIG	= 0x8a,
-	MAX8997_REG_LDO12CONFIG	= 0x8b,
-	MAX8997_REG_LDO13CONFIG	= 0x8c,
-	MAX8997_REG_LDO14CONFIG	= 0x8d,
-	MAX8997_REG_LDO15CONFIG	= 0x8e,
-	MAX8997_REG_LDO16CONFIG	= 0x8f,
-	MAX8997_REG_LDO17CONFIG	= 0x90,
-	MAX8997_REG_LDO18CONFIG	= 0x91,
-	MAX8997_REG_LDO21CONFIG	= 0x92,
-
-	MAX8997_REG_DVSOKTIMER1	= 0x97,
-	MAX8997_REG_DVSOKTIMER2	= 0x98,
-	MAX8997_REG_DVSOKTIMER4	= 0x99,
-	MAX8997_REG_DVSOKTIMER5	= 0x9a,
-
-	MAX8997_REG_PMIC_END	= 0x9b,
-};
-
-enum max8997_muic_reg {
-	MAX8997_MUIC_REG_ID		= 0x0,
-	MAX8997_MUIC_REG_INT1		= 0x1,
-	MAX8997_MUIC_REG_INT2		= 0x2,
-	MAX8997_MUIC_REG_INT3		= 0x3,
-	MAX8997_MUIC_REG_STATUS1	= 0x4,
-	MAX8997_MUIC_REG_STATUS2	= 0x5,
-	MAX8997_MUIC_REG_STATUS3	= 0x6,
-	MAX8997_MUIC_REG_INTMASK1	= 0x7,
-	MAX8997_MUIC_REG_INTMASK2	= 0x8,
-	MAX8997_MUIC_REG_INTMASK3	= 0x9,
-	MAX8997_MUIC_REG_CDETCTRL	= 0xa,
-
-	MAX8997_MUIC_REG_CONTROL1	= 0xc,
-	MAX8997_MUIC_REG_CONTROL2	= 0xd,
-	MAX8997_MUIC_REG_CONTROL3	= 0xe,
-
-	MAX8997_MUIC_REG_END		= 0xf,
-};
-
-enum max8997_haptic_reg {
-	MAX8997_HAPTIC_REG_GENERAL	= 0x00,
-	MAX8997_HAPTIC_REG_CONF1	= 0x01,
-	MAX8997_HAPTIC_REG_CONF2	= 0x02,
-	MAX8997_HAPTIC_REG_DRVCONF	= 0x03,
-	MAX8997_HAPTIC_REG_CYCLECONF1	= 0x04,
-	MAX8997_HAPTIC_REG_CYCLECONF2	= 0x05,
-	MAX8997_HAPTIC_REG_SIGCONF1	= 0x06,
-	MAX8997_HAPTIC_REG_SIGCONF2	= 0x07,
-	MAX8997_HAPTIC_REG_SIGCONF3	= 0x08,
-	MAX8997_HAPTIC_REG_SIGCONF4	= 0x09,
-	MAX8997_HAPTIC_REG_SIGDC1	= 0x0a,
-	MAX8997_HAPTIC_REG_SIGDC2	= 0x0b,
-	MAX8997_HAPTIC_REG_SIGPWMDC1	= 0x0c,
-	MAX8997_HAPTIC_REG_SIGPWMDC2	= 0x0d,
-	MAX8997_HAPTIC_REG_SIGPWMDC3	= 0x0e,
-	MAX8997_HAPTIC_REG_SIGPWMDC4	= 0x0f,
-	MAX8997_HAPTIC_REG_MTR_REV	= 0x10,
-
-	MAX8997_HAPTIC_REG_END		= 0x11,
-};
-
-/* slave addr = 0x0c: using "2nd part" of rev4 datasheet */
-enum max8997_rtc_reg {
-	MAX8997_RTC_CTRLMASK		= 0x02,
-	MAX8997_RTC_CTRL		= 0x03,
-	MAX8997_RTC_UPDATE1		= 0x04,
-	MAX8997_RTC_UPDATE2		= 0x05,
-	MAX8997_RTC_WTSR_SMPL		= 0x06,
-
-	MAX8997_RTC_SEC			= 0x10,
-	MAX8997_RTC_MIN			= 0x11,
-	MAX8997_RTC_HOUR		= 0x12,
-	MAX8997_RTC_DAY_OF_WEEK		= 0x13,
-	MAX8997_RTC_MONTH		= 0x14,
-	MAX8997_RTC_YEAR		= 0x15,
-	MAX8997_RTC_DAY_OF_MONTH	= 0x16,
-	MAX8997_RTC_ALARM1_SEC		= 0x17,
-	MAX8997_RTC_ALARM1_MIN		= 0x18,
-	MAX8997_RTC_ALARM1_HOUR		= 0x19,
-	MAX8997_RTC_ALARM1_DAY_OF_WEEK	= 0x1a,
-	MAX8997_RTC_ALARM1_MONTH	= 0x1b,
-	MAX8997_RTC_ALARM1_YEAR		= 0x1c,
-	MAX8997_RTC_ALARM1_DAY_OF_MONTH	= 0x1d,
-	MAX8997_RTC_ALARM2_SEC		= 0x1e,
-	MAX8997_RTC_ALARM2_MIN		= 0x1f,
-	MAX8997_RTC_ALARM2_HOUR		= 0x20,
-	MAX8997_RTC_ALARM2_DAY_OF_WEEK	= 0x21,
-	MAX8997_RTC_ALARM2_MONTH	= 0x22,
-	MAX8997_RTC_ALARM2_YEAR		= 0x23,
-	MAX8997_RTC_ALARM2_DAY_OF_MONTH	= 0x24,
-};
-
-enum max8997_irq_source {
-	PMIC_INT1 = 0,
-	PMIC_INT2,
-	PMIC_INT3,
-	PMIC_INT4,
-
-	FUEL_GAUGE, /* Ignored (MAX17042 driver handles) */
-
-	MUIC_INT1,
-	MUIC_INT2,
-	MUIC_INT3,
-
-	GPIO_LOW, /* Not implemented */
-	GPIO_HI, /* Not implemented */
-
-	FLASH_STATUS, /* Not implemented */
-
-	MAX8997_IRQ_GROUP_NR,
-};
-
-enum max8997_irq {
-	MAX8997_PMICIRQ_PWRONR,
-	MAX8997_PMICIRQ_PWRONF,
-	MAX8997_PMICIRQ_PWRON1SEC,
-	MAX8997_PMICIRQ_JIGONR,
-	MAX8997_PMICIRQ_JIGONF,
-	MAX8997_PMICIRQ_LOWBAT2,
-	MAX8997_PMICIRQ_LOWBAT1,
-
-	MAX8997_PMICIRQ_JIGR,
-	MAX8997_PMICIRQ_JIGF,
-	MAX8997_PMICIRQ_MR,
-	MAX8997_PMICIRQ_DVS1OK,
-	MAX8997_PMICIRQ_DVS2OK,
-	MAX8997_PMICIRQ_DVS3OK,
-	MAX8997_PMICIRQ_DVS4OK,
-
-	MAX8997_PMICIRQ_CHGINS,
-	MAX8997_PMICIRQ_CHGRM,
-	MAX8997_PMICIRQ_DCINOVP,
-	MAX8997_PMICIRQ_TOPOFFR,
-	MAX8997_PMICIRQ_CHGRSTF,
-	MAX8997_PMICIRQ_MBCHGTMEXPD,
-
-	MAX8997_PMICIRQ_RTC60S,
-	MAX8997_PMICIRQ_RTCA1,
-	MAX8997_PMICIRQ_RTCA2,
-	MAX8997_PMICIRQ_SMPL_INT,
-	MAX8997_PMICIRQ_RTC1S,
-	MAX8997_PMICIRQ_WTSR,
-
-	MAX8997_MUICIRQ_ADCError,
-	MAX8997_MUICIRQ_ADCLow,
-	MAX8997_MUICIRQ_ADC,
-
-	MAX8997_MUICIRQ_VBVolt,
-	MAX8997_MUICIRQ_DBChg,
-	MAX8997_MUICIRQ_DCDTmr,
-	MAX8997_MUICIRQ_ChgDetRun,
-	MAX8997_MUICIRQ_ChgTyp,
-
-	MAX8997_MUICIRQ_OVP,
-
-	MAX8997_IRQ_NR,
-};
-
-#define MAX8997_NUM_GPIO	12
-struct max8997_dev {
-	struct device *dev;
-	struct i2c_client *i2c; /* 0xcc / PMIC, Battery Control, and FLASH */
-	struct i2c_client *rtc; /* slave addr 0x0c */
-	struct i2c_client *haptic; /* slave addr 0x90 */
-	struct i2c_client *muic; /* slave addr 0x4a */
-	struct mutex iolock;
-
-	int type;
-	struct platform_device *battery; /* battery control (not fuel gauge) */
-
-	int irq;
-	int ono;
-	int irq_base;
-	struct mutex irqlock;
-	int irq_masks_cur[MAX8997_IRQ_GROUP_NR];
-	int irq_masks_cache[MAX8997_IRQ_GROUP_NR];
-
-	/* For hibernation */
-	u8 reg_dump[MAX8997_REG_PMIC_END + MAX8997_MUIC_REG_END +
-		MAX8997_HAPTIC_REG_END];
-
-	bool gpio_status[MAX8997_NUM_GPIO];
-};
-
-enum max8997_types {
-	TYPE_MAX8997,
-	TYPE_MAX8966,
-};
-
-extern int max8997_irq_init(struct max8997_dev *max8997);
-extern void max8997_irq_exit(struct max8997_dev *max8997);
-extern int max8997_irq_resume(struct max8997_dev *max8997);
-
-extern int max8997_read_reg(struct i2c_client *i2c, u8 reg, u8 *dest);
-extern int max8997_bulk_read(struct i2c_client *i2c, u8 reg, int count,
-				u8 *buf);
-extern int max8997_write_reg(struct i2c_client *i2c, u8 reg, u8 value);
-extern int max8997_bulk_write(struct i2c_client *i2c, u8 reg, int count,
-				u8 *buf);
-extern int max8997_update_reg(struct i2c_client *i2c, u8 reg, u8 val, u8 mask);
-
-#define MAX8997_GPIO_INT_BOTH	(0x3 << 4)
-#define MAX8997_GPIO_INT_RISE	(0x2 << 4)
-#define MAX8997_GPIO_INT_FALL	(0x1 << 4)
-
-#define MAX8997_GPIO_INT_MASK	(0x3 << 4)
-#define MAX8997_GPIO_DATA_MASK	(0x1 << 2)
-#endif /*  __LINUX_MFD_MAX8997_PRIV_H */
diff --git a/ANDROID_3.4.5/include/linux/mfd/max8997.h b/ANDROID_3.4.5/include/linux/mfd/max8997.h
deleted file mode 100644
index 28726dd5..00000000
--- a/ANDROID_3.4.5/include/linux/mfd/max8997.h
+++ /dev/null
@@ -1,252 +0,0 @@
-/*
- * max8997.h - Driver for the Maxim 8997/8966
- *
- *  Copyright (C) 2009-2010 Samsung Electrnoics
- *  MyungJoo Ham <myungjoo.ham@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- * This driver is based on max8998.h
- *
- * MAX8997 has PMIC, MUIC, HAPTIC, RTC, FLASH, and Fuel Gauge devices.
- * Except Fuel Gauge, every device shares the same I2C bus and included in
- * this mfd driver. Although the fuel gauge is included in the chip, it is
- * excluded from the driver because a) it has a different I2C bus from
- * others and b) it can be enabled simply by using MAX17042 driver.
- */
-
-#ifndef __LINUX_MFD_MAX8998_H
-#define __LINUX_MFD_MAX8998_H
-
-#include <linux/regulator/consumer.h>
-
-/* MAX8997/8966 regulator IDs */
-enum max8998_regulators {
-	MAX8997_LDO1 = 0,
-	MAX8997_LDO2,
-	MAX8997_LDO3,
-	MAX8997_LDO4,
-	MAX8997_LDO5,
-	MAX8997_LDO6,
-	MAX8997_LDO7,
-	MAX8997_LDO8,
-	MAX8997_LDO9,
-	MAX8997_LDO10,
-	MAX8997_LDO11,
-	MAX8997_LDO12,
-	MAX8997_LDO13,
-	MAX8997_LDO14,
-	MAX8997_LDO15,
-	MAX8997_LDO16,
-	MAX8997_LDO17,
-	MAX8997_LDO18,
-	MAX8997_LDO21,
-	MAX8997_BUCK1,
-	MAX8997_BUCK2,
-	MAX8997_BUCK3,
-	MAX8997_BUCK4,
-	MAX8997_BUCK5,
-	MAX8997_BUCK6,
-	MAX8997_BUCK7,
-	MAX8997_EN32KHZ_AP,
-	MAX8997_EN32KHZ_CP,
-	MAX8997_ENVICHG,
-	MAX8997_ESAFEOUT1,
-	MAX8997_ESAFEOUT2,
-	MAX8997_CHARGER_CV, /* control MBCCV of MBCCTRL3 */
-	MAX8997_CHARGER, /* charger current, MBCCTRL4 */
-	MAX8997_CHARGER_TOPOFF, /* MBCCTRL5 */
-
-	MAX8997_REG_MAX,
-};
-
-struct max8997_regulator_data {
-	int id;
-	struct regulator_init_data *initdata;
-};
-
-enum max8997_muic_usb_type {
-	MAX8997_USB_HOST,
-	MAX8997_USB_DEVICE,
-};
-
-enum max8997_muic_charger_type {
-	MAX8997_CHARGER_TYPE_NONE = 0,
-	MAX8997_CHARGER_TYPE_USB,
-	MAX8997_CHARGER_TYPE_DOWNSTREAM_PORT,
-	MAX8997_CHARGER_TYPE_DEDICATED_CHG,
-	MAX8997_CHARGER_TYPE_500MA,
-	MAX8997_CHARGER_TYPE_1A,
-	MAX8997_CHARGER_TYPE_DEAD_BATTERY = 7,
-};
-
-struct max8997_muic_reg_data {
-	u8 addr;
-	u8 data;
-};
-
-/**
- * struct max8997_muic_platform_data
- * @usb_callback: callback function for USB
- *		  inform callee of USB type (HOST or DEVICE)
- *		  and attached state(true or false)
- * @charger_callback: callback function for charger
- *		  inform callee of charger_type
- *		  and attached state(true or false)
- * @deskdock_callback: callback function for desk dock
- *		  inform callee of attached state(true or false)
- * @cardock_callback: callback function for car dock
- *		  inform callee of attached state(true or false)
- * @mhl_callback: callback function for MHL (Mobile High-definition Link)
- *		  inform callee of attached state(true or false)
- * @uart_callback: callback function for JIG UART
- *		   inform callee of attached state(true or false)
- * @init_data: array of max8997_muic_reg_data
- *	       used for initializing registers of MAX8997 MUIC device
- * @num_init_data: array size of init_data
- */
-struct max8997_muic_platform_data {
-	void (*usb_callback)(enum max8997_muic_usb_type usb_type,
-		bool attached);
-	void (*charger_callback)(bool attached,
-		enum max8997_muic_charger_type charger_type);
-	void (*deskdock_callback) (bool attached);
-	void (*cardock_callback) (bool attached);
-	void (*mhl_callback) (bool attached);
-	void (*uart_callback) (bool attached);
-
-	struct max8997_muic_reg_data *init_data;
-	int num_init_data;
-};
-
-enum max8997_haptic_motor_type {
-	MAX8997_HAPTIC_ERM,
-	MAX8997_HAPTIC_LRA,
-};
-
-enum max8997_haptic_pulse_mode {
-	MAX8997_EXTERNAL_MODE,
-	MAX8997_INTERNAL_MODE,
-};
-
-enum max8997_haptic_pwm_divisor {
-	MAX8997_PWM_DIVISOR_32,
-	MAX8997_PWM_DIVISOR_64,
-	MAX8997_PWM_DIVISOR_128,
-	MAX8997_PWM_DIVISOR_256,
-};
-
-/**
- * max8997_haptic_platform_data
- * @pwm_channel_id: channel number of PWM device
- *		    valid for MAX8997_EXTERNAL_MODE
- * @pwm_period: period in nano second for PWM device
- *		valid for MAX8997_EXTERNAL_MODE
- * @type: motor type
- * @mode: pulse mode
- *     MAX8997_EXTERNAL_MODE: external PWM device is used to control motor
- *     MAX8997_INTERNAL_MODE: internal pulse generator is used to control motor
- * @pwm_divisor: divisor for external PWM device
- * @internal_mode_pattern: internal mode pattern for internal mode
- *     [0 - 3]: valid pattern number
- * @pattern_cycle: the number of cycles of the waveform
- *		   for the internal mode pattern
- *     [0 - 15]: available cycles
- * @pattern_signal_period: period of the waveform for the internal mode pattern
- *     [0 - 255]: available period
- */
-struct max8997_haptic_platform_data {
-	unsigned int pwm_channel_id;
-	unsigned int pwm_period;
-
-	enum max8997_haptic_motor_type type;
-	enum max8997_haptic_pulse_mode mode;
-	enum max8997_haptic_pwm_divisor pwm_divisor;
-
-	unsigned int internal_mode_pattern;
-	unsigned int pattern_cycle;
-	unsigned int pattern_signal_period;
-};
-
-enum max8997_led_mode {
-	MAX8997_NONE,
-	MAX8997_FLASH_MODE,
-	MAX8997_MOVIE_MODE,
-	MAX8997_FLASH_PIN_CONTROL_MODE,
-	MAX8997_MOVIE_PIN_CONTROL_MODE,
-};
-
-/**
- *  struct max8997_led_platform_data
- *  The number of LED devices for MAX8997 is two
- *  @mode: LED mode for each LED device
- *  @brightness: initial brightness for each LED device
- *	range:
- *	[0 - 31]: MAX8997_FLASH_MODE and MAX8997_FLASH_PIN_CONTROL_MODE
- *	[0 - 15]: MAX8997_MOVIE_MODE and MAX8997_MOVIE_PIN_CONTROL_MODE
- */
-struct max8997_led_platform_data {
-	enum max8997_led_mode mode[2];
-	u8 brightness[2];
-};
-
-struct max8997_platform_data {
-	/* IRQ */
-	int irq_base;
-	int ono;
-	int wakeup;
-
-	/* ---- PMIC ---- */
-	struct max8997_regulator_data *regulators;
-	int num_regulators;
-
-	/*
-	 * SET1~3 DVS GPIOs control Buck1, 2, and 5 simultaneously. Therefore,
-	 * With buckx_gpiodvs enabled, the buckx cannot be controlled
-	 * independently. To control buckx (of 1, 2, and 5) independently,
-	 * disable buckx_gpiodvs and control with BUCKxDVS1 register.
-	 *
-	 * When buckx_gpiodvs and bucky_gpiodvs are both enabled, set_voltage
-	 * on buckx will change the voltage of bucky at the same time.
-	 *
-	 */
-	bool ignore_gpiodvs_side_effect;
-	int buck125_gpios[3]; /* GPIO of [0]SET1, [1]SET2, [2]SET3 */
-	int buck125_default_idx; /* Default value of SET1, 2, 3 */
-	unsigned int buck1_voltage[8]; /* buckx_voltage in uV */
-	bool buck1_gpiodvs;
-	unsigned int buck2_voltage[8];
-	bool buck2_gpiodvs;
-	unsigned int buck5_voltage[8];
-	bool buck5_gpiodvs;
-
-	/* ---- Charger control ---- */
-	/* eoc stands for 'end of charge' */
-	int eoc_mA; /* 50 ~ 200mA by 10mA step */
-	/* charge Full Timeout */
-	int timeout; /* 0 (no timeout), 5, 6, 7 hours */
-
-	/* ---- MUIC ---- */
-	struct max8997_muic_platform_data *muic_pdata;
-
-	/* ---- HAPTIC ---- */
-	struct max8997_haptic_platform_data *haptic_pdata;
-
-	/* RTC: Not implemented */
-	/* ---- LED ---- */
-	struct max8997_led_platform_data *led_pdata;
-};
-
-#endif /* __LINUX_MFD_MAX8998_H */
diff --git a/ANDROID_3.4.5/include/linux/mfd/max8998-private.h b/ANDROID_3.4.5/include/linux/mfd/max8998-private.h
deleted file mode 100644
index effa5d3b..00000000
--- a/ANDROID_3.4.5/include/linux/mfd/max8998-private.h
+++ /dev/null
@@ -1,177 +0,0 @@
-/*
- * max8998.h - Voltage regulator driver for the Maxim 8998
- *
- *  Copyright (C) 2009-2010 Samsung Electrnoics
- *  Kyungmin Park <kyungmin.park@samsung.com>
- *  Marek Szyprowski <m.szyprowski@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __LINUX_MFD_MAX8998_PRIV_H
-#define __LINUX_MFD_MAX8998_PRIV_H
-
-#define MAX8998_NUM_IRQ_REGS	4
-
-/* MAX 8998 registers */
-enum {
-	MAX8998_REG_IRQ1,
-	MAX8998_REG_IRQ2,
-	MAX8998_REG_IRQ3,
-	MAX8998_REG_IRQ4,
-	MAX8998_REG_IRQM1,
-	MAX8998_REG_IRQM2,
-	MAX8998_REG_IRQM3,
-	MAX8998_REG_IRQM4,
-	MAX8998_REG_STATUS1,
-	MAX8998_REG_STATUS2,
-	MAX8998_REG_STATUSM1,
-	MAX8998_REG_STATUSM2,
-	MAX8998_REG_CHGR1,
-	MAX8998_REG_CHGR2,
-	MAX8998_REG_LDO_ACTIVE_DISCHARGE1,
-	MAX8998_REG_LDO_ACTIVE_DISCHARGE2,
-	MAX8998_REG_BUCK_ACTIVE_DISCHARGE3,
-	MAX8998_REG_ONOFF1,
-	MAX8998_REG_ONOFF2,
-	MAX8998_REG_ONOFF3,
-	MAX8998_REG_ONOFF4,
-	MAX8998_REG_BUCK1_VOLTAGE1,
-	MAX8998_REG_BUCK1_VOLTAGE2,
-	MAX8998_REG_BUCK1_VOLTAGE3,
-	MAX8998_REG_BUCK1_VOLTAGE4,
-	MAX8998_REG_BUCK2_VOLTAGE1,
-	MAX8998_REG_BUCK2_VOLTAGE2,
-	MAX8998_REG_BUCK3,
-	MAX8998_REG_BUCK4,
-	MAX8998_REG_LDO2_LDO3,
-	MAX8998_REG_LDO4,
-	MAX8998_REG_LDO5,
-	MAX8998_REG_LDO6,
-	MAX8998_REG_LDO7,
-	MAX8998_REG_LDO8_LDO9,
-	MAX8998_REG_LDO10_LDO11,
-	MAX8998_REG_LDO12,
-	MAX8998_REG_LDO13,
-	MAX8998_REG_LDO14,
-	MAX8998_REG_LDO15,
-	MAX8998_REG_LDO16,
-	MAX8998_REG_LDO17,
-	MAX8998_REG_BKCHR,
-	MAX8998_REG_LBCNFG1,
-	MAX8998_REG_LBCNFG2,
-};
-
-/* IRQ definitions */
-enum {
-	MAX8998_IRQ_DCINF,
-	MAX8998_IRQ_DCINR,
-	MAX8998_IRQ_JIGF,
-	MAX8998_IRQ_JIGR,
-	MAX8998_IRQ_PWRONF,
-	MAX8998_IRQ_PWRONR,
-
-	MAX8998_IRQ_WTSREVNT,
-	MAX8998_IRQ_SMPLEVNT,
-	MAX8998_IRQ_ALARM1,
-	MAX8998_IRQ_ALARM0,
-
-	MAX8998_IRQ_ONKEY1S,
-	MAX8998_IRQ_TOPOFFR,
-	MAX8998_IRQ_DCINOVPR,
-	MAX8998_IRQ_CHGRSTF,
-	MAX8998_IRQ_DONER,
-	MAX8998_IRQ_CHGFAULT,
-
-	MAX8998_IRQ_LOBAT1,
-	MAX8998_IRQ_LOBAT2,
-
-	MAX8998_IRQ_NR,
-};
-
-/* MAX8998 various variants */
-enum {
-	TYPE_MAX8998 = 0, /* Default */
-	TYPE_LP3974,	/* National version of MAX8998 */
-	TYPE_LP3979,	/* Added AVS */
-};
-
-#define MAX8998_IRQ_DCINF_MASK		(1 << 2)
-#define MAX8998_IRQ_DCINR_MASK		(1 << 3)
-#define MAX8998_IRQ_JIGF_MASK		(1 << 4)
-#define MAX8998_IRQ_JIGR_MASK		(1 << 5)
-#define MAX8998_IRQ_PWRONF_MASK		(1 << 6)
-#define MAX8998_IRQ_PWRONR_MASK		(1 << 7)
-
-#define MAX8998_IRQ_WTSREVNT_MASK	(1 << 0)
-#define MAX8998_IRQ_SMPLEVNT_MASK	(1 << 1)
-#define MAX8998_IRQ_ALARM1_MASK		(1 << 2)
-#define MAX8998_IRQ_ALARM0_MASK		(1 << 3)
-
-#define MAX8998_IRQ_ONKEY1S_MASK	(1 << 0)
-#define MAX8998_IRQ_TOPOFFR_MASK	(1 << 2)
-#define MAX8998_IRQ_DCINOVPR_MASK	(1 << 3)
-#define MAX8998_IRQ_CHGRSTF_MASK	(1 << 4)
-#define MAX8998_IRQ_DONER_MASK		(1 << 5)
-#define MAX8998_IRQ_CHGFAULT_MASK	(1 << 7)
-
-#define MAX8998_IRQ_LOBAT1_MASK		(1 << 0)
-#define MAX8998_IRQ_LOBAT2_MASK		(1 << 1)
-
-#define MAX8998_ENRAMP                  (1 << 4)
-
-/**
- * struct max8998_dev - max8998 master device for sub-drivers
- * @dev: master device of the chip (can be used to access platform data)
- * @i2c: i2c client private data for regulator
- * @rtc: i2c client private data for rtc
- * @iolock: mutex for serializing io access
- * @irqlock: mutex for buslock
- * @irq_base: base IRQ number for max8998, required for IRQs
- * @irq: generic IRQ number for max8998
- * @ono: power onoff IRQ number for max8998
- * @irq_masks_cur: currently active value
- * @irq_masks_cache: cached hardware value
- * @type: indicate which max8998 "variant" is used
- */
-struct max8998_dev {
-	struct device *dev;
-	struct i2c_client *i2c;
-	struct i2c_client *rtc;
-	struct mutex iolock;
-	struct mutex irqlock;
-
-	int irq_base;
-	int irq;
-	int ono;
-	u8 irq_masks_cur[MAX8998_NUM_IRQ_REGS];
-	u8 irq_masks_cache[MAX8998_NUM_IRQ_REGS];
-	int type;
-	bool wakeup;
-};
-
-int max8998_irq_init(struct max8998_dev *max8998);
-void max8998_irq_exit(struct max8998_dev *max8998);
-int max8998_irq_resume(struct max8998_dev *max8998);
-
-extern int max8998_read_reg(struct i2c_client *i2c, u8 reg, u8 *dest);
-extern int max8998_bulk_read(struct i2c_client *i2c, u8 reg, int count,
-		u8 *buf);
-extern int max8998_write_reg(struct i2c_client *i2c, u8 reg, u8 value);
-extern int max8998_bulk_write(struct i2c_client *i2c, u8 reg, int count,
-		u8 *buf);
-extern int max8998_update_reg(struct i2c_client *i2c, u8 reg, u8 val, u8 mask);
-
-#endif /*  __LINUX_MFD_MAX8998_PRIV_H */
diff --git a/ANDROID_3.4.5/include/linux/mfd/max8998.h b/ANDROID_3.4.5/include/linux/mfd/max8998.h
deleted file mode 100644
index f4f0dfa4..00000000
--- a/ANDROID_3.4.5/include/linux/mfd/max8998.h
+++ /dev/null
@@ -1,124 +0,0 @@
-/*
- * max8998.h - Voltage regulator driver for the Maxim 8998
- *
- *  Copyright (C) 2009-2010 Samsung Electrnoics
- *  Kyungmin Park <kyungmin.park@samsung.com>
- *  Marek Szyprowski <m.szyprowski@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __LINUX_MFD_MAX8998_H
-#define __LINUX_MFD_MAX8998_H
-
-#include <linux/regulator/machine.h>
-
-/* MAX 8998 regulator ids */
-enum {
-	MAX8998_LDO2 = 2,
-	MAX8998_LDO3,
-	MAX8998_LDO4,
-	MAX8998_LDO5,
-	MAX8998_LDO6,
-	MAX8998_LDO7,
-	MAX8998_LDO8,
-	MAX8998_LDO9,
-	MAX8998_LDO10,
-	MAX8998_LDO11,
-	MAX8998_LDO12,
-	MAX8998_LDO13,
-	MAX8998_LDO14,
-	MAX8998_LDO15,
-	MAX8998_LDO16,
-	MAX8998_LDO17,
-	MAX8998_BUCK1,
-	MAX8998_BUCK2,
-	MAX8998_BUCK3,
-	MAX8998_BUCK4,
-	MAX8998_EN32KHZ_AP,
-	MAX8998_EN32KHZ_CP,
-	MAX8998_ENVICHG,
-	MAX8998_ESAFEOUT1,
-	MAX8998_ESAFEOUT2,
-};
-
-/**
- * max8998_regulator_data - regulator data
- * @id: regulator id
- * @initdata: regulator init data (contraints, supplies, ...)
- */
-struct max8998_regulator_data {
-	int				id;
-	struct regulator_init_data	*initdata;
-};
-
-/**
- * struct max8998_board - packages regulator init data
- * @regulators: array of defined regulators
- * @num_regulators: number of regultors used
- * @irq_base: base IRQ number for max8998, required for IRQs
- * @ono: power onoff IRQ number for max8998
- * @buck_voltage_lock: Do NOT change the values of the following six
- *   registers set by buck?_voltage?. The voltage of BUCK1/2 cannot
- *   be other than the preset values.
- * @buck1_voltage1: BUCK1 DVS mode 1 voltage register
- * @buck1_voltage2: BUCK1 DVS mode 2 voltage register
- * @buck1_voltage3: BUCK1 DVS mode 3 voltage register
- * @buck1_voltage4: BUCK1 DVS mode 4 voltage register
- * @buck2_voltage1: BUCK2 DVS mode 1 voltage register
- * @buck2_voltage2: BUCK2 DVS mode 2 voltage register
- * @buck1_set1: BUCK1 gpio pin 1 to set output voltage
- * @buck1_set2: BUCK1 gpio pin 2 to set output voltage
- * @buck1_default_idx: Default for BUCK1 gpio pin 1, 2
- * @buck2_set3: BUCK2 gpio pin to set output voltage
- * @buck2_default_idx: Default for BUCK2 gpio pin.
- * @wakeup: Allow to wake up from suspend
- * @rtc_delay: LP3974 RTC chip bug that requires delay after a register
- * write before reading it.
- * @eoc: End of Charge Level in percent: 10% ~ 45% by 5% step
- *   If it equals 0, leave it unchanged.
- *   Otherwise, it is a invalid value.
- * @restart: Restart Level in mV: 100, 150, 200, and -1 for disable.
- *   If it equals 0, leave it unchanged.
- *   Otherwise, it is a invalid value.
- * @timeout: Full Timeout in hours: 5, 6, 7, and -1 for disable.
- *   If it equals 0, leave it unchanged.
- *   Otherwise, leave it unchanged.
- */
-struct max8998_platform_data {
-	struct max8998_regulator_data	*regulators;
-	int				num_regulators;
-	int				irq_base;
-	int				ono;
-	bool				buck_voltage_lock;
-	int				buck1_voltage1;
-	int				buck1_voltage2;
-	int				buck1_voltage3;
-	int				buck1_voltage4;
-	int				buck2_voltage1;
-	int				buck2_voltage2;
-	int				buck1_set1;
-	int				buck1_set2;
-	int				buck1_default_idx;
-	int				buck2_set3;
-	int				buck2_default_idx;
-	bool				wakeup;
-	bool				rtc_delay;
-	int				eoc;
-	int				restart;
-	int				timeout;
-};
-
-#endif /*  __LINUX_MFD_MAX8998_H */
diff --git a/ANDROID_3.4.5/include/linux/mfd/mc13783.h b/ANDROID_3.4.5/include/linux/mfd/mc13783.h
deleted file mode 100644
index a8eeda77..00000000
--- a/ANDROID_3.4.5/include/linux/mfd/mc13783.h
+++ /dev/null
@@ -1,91 +0,0 @@
-/*
- * Copyright 2010 Yong Shen <yong.shen@linaro.org>
- * Copyright 2009-2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#ifndef __LINUX_MFD_MC13783_H
-#define __LINUX_MFD_MC13783_H
-
-#include <linux/mfd/mc13xxx.h>
-
-#define	MC13783_REG_SW1A		0
-#define	MC13783_REG_SW1B		1
-#define	MC13783_REG_SW2A		2
-#define	MC13783_REG_SW2B		3
-#define	MC13783_REG_SW3		4
-#define	MC13783_REG_PLL		5
-#define	MC13783_REG_VAUDIO	6
-#define	MC13783_REG_VIOHI	7
-#define	MC13783_REG_VIOLO	8
-#define	MC13783_REG_VDIG	9
-#define	MC13783_REG_VGEN	10
-#define	MC13783_REG_VRFDIG	11
-#define	MC13783_REG_VRFREF	12
-#define	MC13783_REG_VRFCP	13
-#define	MC13783_REG_VSIM	14
-#define	MC13783_REG_VESIM	15
-#define	MC13783_REG_VCAM	16
-#define	MC13783_REG_VRFBG	17
-#define	MC13783_REG_VVIB	18
-#define	MC13783_REG_VRF1	19
-#define	MC13783_REG_VRF2	20
-#define	MC13783_REG_VMMC1	21
-#define	MC13783_REG_VMMC2	22
-#define	MC13783_REG_GPO1	23
-#define	MC13783_REG_GPO2	24
-#define	MC13783_REG_GPO3	25
-#define	MC13783_REG_GPO4	26
-#define	MC13783_REG_V1		27
-#define	MC13783_REG_V2		28
-#define	MC13783_REG_V3		29
-#define	MC13783_REG_V4		30
-#define	MC13783_REG_PWGT1SPI	31
-#define	MC13783_REG_PWGT2SPI	32
-
-#define MC13783_IRQ_ADCDONE	MC13XXX_IRQ_ADCDONE
-#define MC13783_IRQ_ADCBISDONE	MC13XXX_IRQ_ADCBISDONE
-#define MC13783_IRQ_TS		MC13XXX_IRQ_TS
-#define MC13783_IRQ_WHIGH	3
-#define MC13783_IRQ_WLOW	4
-#define MC13783_IRQ_CHGDET	MC13XXX_IRQ_CHGDET
-#define MC13783_IRQ_CHGOV	7
-#define MC13783_IRQ_CHGREV	MC13XXX_IRQ_CHGREV
-#define MC13783_IRQ_CHGSHORT	MC13XXX_IRQ_CHGSHORT
-#define MC13783_IRQ_CCCV	MC13XXX_IRQ_CCCV
-#define MC13783_IRQ_CHGCURR	MC13XXX_IRQ_CHGCURR
-#define MC13783_IRQ_BPON	MC13XXX_IRQ_BPON
-#define MC13783_IRQ_LOBATL	MC13XXX_IRQ_LOBATL
-#define MC13783_IRQ_LOBATH	MC13XXX_IRQ_LOBATH
-#define MC13783_IRQ_UDP		15
-#define MC13783_IRQ_USB		16
-#define MC13783_IRQ_ID		19
-#define MC13783_IRQ_SE1		21
-#define MC13783_IRQ_CKDET	22
-#define MC13783_IRQ_UDM		23
-#define MC13783_IRQ_1HZ		MC13XXX_IRQ_1HZ
-#define MC13783_IRQ_TODA	MC13XXX_IRQ_TODA
-#define MC13783_IRQ_ONOFD1	27
-#define MC13783_IRQ_ONOFD2	28
-#define MC13783_IRQ_ONOFD3	29
-#define MC13783_IRQ_SYSRST	MC13XXX_IRQ_SYSRST
-#define MC13783_IRQ_RTCRST	MC13XXX_IRQ_RTCRST
-#define MC13783_IRQ_PC		MC13XXX_IRQ_PC
-#define MC13783_IRQ_WARM	MC13XXX_IRQ_WARM
-#define MC13783_IRQ_MEMHLD	MC13XXX_IRQ_MEMHLD
-#define MC13783_IRQ_PWRRDY	35
-#define MC13783_IRQ_THWARNL	MC13XXX_IRQ_THWARNL
-#define MC13783_IRQ_THWARNH	MC13XXX_IRQ_THWARNH
-#define MC13783_IRQ_CLK		MC13XXX_IRQ_CLK
-#define MC13783_IRQ_SEMAF	39
-#define MC13783_IRQ_MC2B	41
-#define MC13783_IRQ_HSDET	42
-#define MC13783_IRQ_HSL		43
-#define MC13783_IRQ_ALSPTH	44
-#define MC13783_IRQ_AHSSHORT	45
-#define MC13783_NUM_IRQ		MC13XXX_NUM_IRQ
-
-#endif /* ifndef __LINUX_MFD_MC13783_H */
diff --git a/ANDROID_3.4.5/include/linux/mfd/mc13892.h b/ANDROID_3.4.5/include/linux/mfd/mc13892.h
deleted file mode 100644
index a00f2bec..00000000
--- a/ANDROID_3.4.5/include/linux/mfd/mc13892.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * Copyright 2010 Yong Shen <yong.shen@linaro.org>
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-
-#ifndef __LINUX_MFD_MC13892_H
-#define __LINUX_MFD_MC13892_H
-
-#include <linux/mfd/mc13xxx.h>
-
-#define MC13892_SW1		0
-#define MC13892_SW2		1
-#define MC13892_SW3		2
-#define MC13892_SW4		3
-#define MC13892_SWBST	4
-#define MC13892_VIOHI	5
-#define MC13892_VPLL	6
-#define MC13892_VDIG	7
-#define MC13892_VSD	8
-#define MC13892_VUSB2	9
-#define MC13892_VVIDEO	10
-#define MC13892_VAUDIO	11
-#define MC13892_VCAM	12
-#define MC13892_VGEN1	13
-#define MC13892_VGEN2	14
-#define MC13892_VGEN3	15
-#define MC13892_VUSB	16
-#define MC13892_GPO1	17
-#define MC13892_GPO2	18
-#define MC13892_GPO3	19
-#define MC13892_GPO4	20
-#define MC13892_PWGT1SPI	21
-#define MC13892_PWGT2SPI	22
-#define MC13892_VCOINCELL	23
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/mfd/mc13xxx.h b/ANDROID_3.4.5/include/linux/mfd/mc13xxx.h
deleted file mode 100644
index 10e038ba..00000000
--- a/ANDROID_3.4.5/include/linux/mfd/mc13xxx.h
+++ /dev/null
@@ -1,210 +0,0 @@
-/*
- * Copyright 2009-2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#ifndef __LINUX_MFD_MC13XXX_H
-#define __LINUX_MFD_MC13XXX_H
-
-#include <linux/interrupt.h>
-
-struct mc13xxx;
-
-void mc13xxx_lock(struct mc13xxx *mc13xxx);
-void mc13xxx_unlock(struct mc13xxx *mc13xxx);
-
-int mc13xxx_reg_read(struct mc13xxx *mc13xxx, unsigned int offset, u32 *val);
-int mc13xxx_reg_write(struct mc13xxx *mc13xxx, unsigned int offset, u32 val);
-int mc13xxx_reg_rmw(struct mc13xxx *mc13xxx, unsigned int offset,
-		u32 mask, u32 val);
-
-int mc13xxx_get_flags(struct mc13xxx *mc13xxx);
-
-int mc13xxx_irq_request(struct mc13xxx *mc13xxx, int irq,
-		irq_handler_t handler, const char *name, void *dev);
-int mc13xxx_irq_request_nounmask(struct mc13xxx *mc13xxx, int irq,
-		irq_handler_t handler, const char *name, void *dev);
-int mc13xxx_irq_free(struct mc13xxx *mc13xxx, int irq, void *dev);
-
-int mc13xxx_irq_mask(struct mc13xxx *mc13xxx, int irq);
-int mc13xxx_irq_unmask(struct mc13xxx *mc13xxx, int irq);
-int mc13xxx_irq_status(struct mc13xxx *mc13xxx, int irq,
-		int *enabled, int *pending);
-int mc13xxx_irq_ack(struct mc13xxx *mc13xxx, int irq);
-
-int mc13xxx_get_flags(struct mc13xxx *mc13xxx);
-
-int mc13xxx_adc_do_conversion(struct mc13xxx *mc13xxx,
-		unsigned int mode, unsigned int channel,
-		u8 ato, bool atox, unsigned int *sample);
-
-#define MC13XXX_IRQ_ADCDONE	0
-#define MC13XXX_IRQ_ADCBISDONE	1
-#define MC13XXX_IRQ_TS		2
-#define MC13XXX_IRQ_CHGDET	6
-#define MC13XXX_IRQ_CHGREV	8
-#define MC13XXX_IRQ_CHGSHORT	9
-#define MC13XXX_IRQ_CCCV	10
-#define MC13XXX_IRQ_CHGCURR	11
-#define MC13XXX_IRQ_BPON	12
-#define MC13XXX_IRQ_LOBATL	13
-#define MC13XXX_IRQ_LOBATH	14
-#define MC13XXX_IRQ_1HZ		24
-#define MC13XXX_IRQ_TODA	25
-#define MC13XXX_IRQ_SYSRST	30
-#define MC13XXX_IRQ_RTCRST	31
-#define MC13XXX_IRQ_PC		32
-#define MC13XXX_IRQ_WARM	33
-#define MC13XXX_IRQ_MEMHLD	34
-#define MC13XXX_IRQ_THWARNL	36
-#define MC13XXX_IRQ_THWARNH	37
-#define MC13XXX_IRQ_CLK		38
-
-#define MC13XXX_NUM_IRQ		46
-
-struct regulator_init_data;
-
-struct mc13xxx_regulator_init_data {
-	int id;
-	struct regulator_init_data *init_data;
-	struct device_node *node;
-};
-
-struct mc13xxx_regulator_platform_data {
-	int num_regulators;
-	struct mc13xxx_regulator_init_data *regulators;
-};
-
-struct mc13xxx_led_platform_data {
-#define MC13783_LED_MD		0
-#define MC13783_LED_AD		1
-#define MC13783_LED_KP		2
-#define MC13783_LED_R1		3
-#define MC13783_LED_G1		4
-#define MC13783_LED_B1		5
-#define MC13783_LED_R2		6
-#define MC13783_LED_G2		7
-#define MC13783_LED_B2		8
-#define MC13783_LED_R3		9
-#define MC13783_LED_G3		10
-#define MC13783_LED_B3		11
-#define MC13783_LED_MAX MC13783_LED_B3
-	int id;
-	const char *name;
-	const char *default_trigger;
-
-/* Three or two bits current selection depending on the led */
-	char max_current;
-};
-
-struct mc13xxx_leds_platform_data {
-	int num_leds;
-	struct mc13xxx_led_platform_data *led;
-
-#define MC13783_LED_TRIODE_MD	(1 << 0)
-#define MC13783_LED_TRIODE_AD	(1 << 1)
-#define MC13783_LED_TRIODE_KP	(1 << 2)
-#define MC13783_LED_BOOST_EN	(1 << 3)
-#define MC13783_LED_TC1HALF	(1 << 4)
-#define MC13783_LED_SLEWLIMTC	(1 << 5)
-#define MC13783_LED_SLEWLIMBL	(1 << 6)
-#define MC13783_LED_TRIODE_TC1	(1 << 7)
-#define MC13783_LED_TRIODE_TC2	(1 << 8)
-#define MC13783_LED_TRIODE_TC3	(1 << 9)
-	int flags;
-
-#define MC13783_LED_AB_DISABLED		0
-#define MC13783_LED_AB_MD1		1
-#define MC13783_LED_AB_MD12		2
-#define MC13783_LED_AB_MD123		3
-#define MC13783_LED_AB_MD1234		4
-#define MC13783_LED_AB_MD1234_AD1	5
-#define MC13783_LED_AB_MD1234_AD12	6
-#define MC13783_LED_AB_MD1_AD		7
-	char abmode;
-
-#define MC13783_LED_ABREF_200MV	0
-#define MC13783_LED_ABREF_400MV	1
-#define MC13783_LED_ABREF_600MV	2
-#define MC13783_LED_ABREF_800MV	3
-	char abref;
-
-#define MC13783_LED_PERIOD_10MS		0
-#define MC13783_LED_PERIOD_100MS	1
-#define MC13783_LED_PERIOD_500MS	2
-#define MC13783_LED_PERIOD_2S		3
-	char bl_period;
-	char tc1_period;
-	char tc2_period;
-	char tc3_period;
-};
-
-struct mc13xxx_buttons_platform_data {
-#define MC13783_BUTTON_DBNC_0MS		0
-#define MC13783_BUTTON_DBNC_30MS	1
-#define MC13783_BUTTON_DBNC_150MS	2
-#define MC13783_BUTTON_DBNC_750MS	3
-#define MC13783_BUTTON_ENABLE		(1 << 2)
-#define MC13783_BUTTON_POL_INVERT	(1 << 3)
-#define MC13783_BUTTON_RESET_EN		(1 << 4)
-	int b1on_flags;
-	unsigned short b1on_key;
-	int b2on_flags;
-	unsigned short b2on_key;
-	int b3on_flags;
-	unsigned short b3on_key;
-};
-
-struct mc13xxx_ts_platform_data {
-	/* Delay between Touchscreen polarization and ADC Conversion.
-	 * Given in clock ticks of a 32 kHz clock which gives a granularity of
-	 * about 30.5ms */
-	u8 ato;
-
-#define MC13783_TS_ATO_FIRST false
-#define MC13783_TS_ATO_EACH  true
-	/* Use the ATO delay only for the first conversion or for each one */
-	bool atox;
-};
-
-struct mc13xxx_platform_data {
-#define MC13XXX_USE_TOUCHSCREEN (1 << 0)
-#define MC13XXX_USE_CODEC	(1 << 1)
-#define MC13XXX_USE_ADC		(1 << 2)
-#define MC13XXX_USE_RTC		(1 << 3)
-	unsigned int flags;
-
-	struct mc13xxx_regulator_platform_data regulators;
-	struct mc13xxx_leds_platform_data *leds;
-	struct mc13xxx_buttons_platform_data *buttons;
-	struct mc13xxx_ts_platform_data touch;
-};
-
-#define MC13XXX_ADC_MODE_TS		1
-#define MC13XXX_ADC_MODE_SINGLE_CHAN	2
-#define MC13XXX_ADC_MODE_MULT_CHAN	3
-
-#define MC13XXX_ADC0		43
-#define MC13XXX_ADC0_LICELLCON		(1 << 0)
-#define MC13XXX_ADC0_CHRGICON		(1 << 1)
-#define MC13XXX_ADC0_BATICON		(1 << 2)
-#define MC13XXX_ADC0_ADREFEN		(1 << 10)
-#define MC13XXX_ADC0_TSMOD0		(1 << 12)
-#define MC13XXX_ADC0_TSMOD1		(1 << 13)
-#define MC13XXX_ADC0_TSMOD2		(1 << 14)
-#define MC13XXX_ADC0_ADINC1		(1 << 16)
-#define MC13XXX_ADC0_ADINC2		(1 << 17)
-
-#define MC13XXX_ADC0_TSMOD_MASK		(MC13XXX_ADC0_TSMOD0 | \
-					MC13XXX_ADC0_TSMOD1 | \
-					MC13XXX_ADC0_TSMOD2)
-
-#define MC13XXX_ADC0_CONFIG_MASK	(MC13XXX_ADC0_TSMOD_MASK | \
-					MC13XXX_ADC0_LICELLCON | \
-					MC13XXX_ADC0_CHRGICON | \
-					MC13XXX_ADC0_BATICON)
-
-#endif /* ifndef __LINUX_MFD_MC13XXX_H */
diff --git a/ANDROID_3.4.5/include/linux/mfd/mcp.h b/ANDROID_3.4.5/include/linux/mfd/mcp.h
deleted file mode 100644
index a9e8bd15..00000000
--- a/ANDROID_3.4.5/include/linux/mfd/mcp.h
+++ /dev/null
@@ -1,64 +0,0 @@
-/*
- *  linux/drivers/mfd/mcp.h
- *
- *  Copyright (C) 2001 Russell King, All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License.
- */
-#ifndef MCP_H
-#define MCP_H
-
-struct mcp_ops;
-
-struct mcp {
-	struct module	*owner;
-	struct mcp_ops	*ops;
-	spinlock_t	lock;
-	int		use_count;
-	unsigned int	sclk_rate;
-	unsigned int	rw_timeout;
-	struct device	attached_device;
-};
-
-struct mcp_ops {
-	void		(*set_telecom_divisor)(struct mcp *, unsigned int);
-	void		(*set_audio_divisor)(struct mcp *, unsigned int);
-	void		(*reg_write)(struct mcp *, unsigned int, unsigned int);
-	unsigned int	(*reg_read)(struct mcp *, unsigned int);
-	void		(*enable)(struct mcp *);
-	void		(*disable)(struct mcp *);
-};
-
-void mcp_set_telecom_divisor(struct mcp *, unsigned int);
-void mcp_set_audio_divisor(struct mcp *, unsigned int);
-void mcp_reg_write(struct mcp *, unsigned int, unsigned int);
-unsigned int mcp_reg_read(struct mcp *, unsigned int);
-void mcp_enable(struct mcp *);
-void mcp_disable(struct mcp *);
-#define mcp_get_sclk_rate(mcp)	((mcp)->sclk_rate)
-
-struct mcp *mcp_host_alloc(struct device *, size_t);
-int mcp_host_add(struct mcp *, void *);
-void mcp_host_del(struct mcp *);
-void mcp_host_free(struct mcp *);
-
-struct mcp_driver {
-	struct device_driver drv;
-	int (*probe)(struct mcp *);
-	void (*remove)(struct mcp *);
-};
-
-int mcp_driver_register(struct mcp_driver *);
-void mcp_driver_unregister(struct mcp_driver *);
-
-#define mcp_get_drvdata(mcp)	dev_get_drvdata(&(mcp)->attached_device)
-#define mcp_set_drvdata(mcp,d)	dev_set_drvdata(&(mcp)->attached_device, d)
-
-static inline void *mcp_priv(struct mcp *mcp)
-{
-	return mcp + 1;
-}
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/mfd/pcf50633/adc.h b/ANDROID_3.4.5/include/linux/mfd/pcf50633/adc.h
deleted file mode 100644
index b35e6280..00000000
--- a/ANDROID_3.4.5/include/linux/mfd/pcf50633/adc.h
+++ /dev/null
@@ -1,73 +0,0 @@
-/*
- * adc.h  -- Driver for NXP PCF50633 ADC
- *
- * (C) 2006-2008 by Openmoko, Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#ifndef __LINUX_MFD_PCF50633_ADC_H
-#define __LINUX_MFD_PCF50633_ADC_H
-
-#include <linux/mfd/pcf50633/core.h>
-#include <linux/platform_device.h>
-
-/* ADC Registers */
-#define PCF50633_REG_ADCC3		0x52
-#define PCF50633_REG_ADCC2		0x53
-#define PCF50633_REG_ADCC1		0x54
-#define PCF50633_REG_ADCS1		0x55
-#define PCF50633_REG_ADCS2		0x56
-#define PCF50633_REG_ADCS3		0x57
-
-#define PCF50633_ADCC1_ADCSTART		0x01
-#define PCF50633_ADCC1_RES_8BIT		0x02
-#define PCF50633_ADCC1_RES_10BIT	0x00
-#define PCF50633_ADCC1_AVERAGE_NO	0x00
-#define PCF50633_ADCC1_AVERAGE_4	0x04
-#define PCF50633_ADCC1_AVERAGE_8	0x08
-#define PCF50633_ADCC1_AVERAGE_16	0x0c
-#define PCF50633_ADCC1_MUX_BATSNS_RES	0x00
-#define PCF50633_ADCC1_MUX_BATSNS_SUBTR	0x10
-#define PCF50633_ADCC1_MUX_ADCIN2_RES	0x20
-#define PCF50633_ADCC1_MUX_ADCIN2_SUBTR	0x30
-#define PCF50633_ADCC1_MUX_BATTEMP	0x60
-#define PCF50633_ADCC1_MUX_ADCIN1	0x70
-#define PCF50633_ADCC1_AVERAGE_MASK	0x0c
-#define PCF50633_ADCC1_ADCMUX_MASK	0xf0
-
-#define PCF50633_ADCC2_RATIO_NONE	0x00
-#define PCF50633_ADCC2_RATIO_BATTEMP	0x01
-#define PCF50633_ADCC2_RATIO_ADCIN1	0x02
-#define PCF50633_ADCC2_RATIO_BOTH	0x03
-#define PCF50633_ADCC2_RATIOSETTL_100US 0x04
-
-#define PCF50633_ADCC3_ACCSW_EN		0x01
-#define PCF50633_ADCC3_NTCSW_EN		0x04
-#define PCF50633_ADCC3_RES_DIV_TWO	0x10
-#define PCF50633_ADCC3_RES_DIV_THREE	0x00
-
-#define PCF50633_ADCS3_REF_NTCSW	0x00
-#define PCF50633_ADCS3_REF_ACCSW	0x10
-#define PCF50633_ADCS3_REF_2V0		0x20
-#define PCF50633_ADCS3_REF_VISA		0x30
-#define PCF50633_ADCS3_REF_2V0_2	0x70
-#define PCF50633_ADCS3_ADCRDY		0x80
-
-#define PCF50633_ADCS3_ADCDAT1L_MASK	0x03
-#define PCF50633_ADCS3_ADCDAT2L_MASK	0x0c
-#define PCF50633_ADCS3_ADCDAT2L_SHIFT	2
-#define PCF50633_ASCS3_REF_MASK		0x70
-
-extern int
-pcf50633_adc_async_read(struct pcf50633 *pcf, int mux, int avg,
-		void (*callback)(struct pcf50633 *, void *, int),
-		void *callback_param);
-extern int
-pcf50633_adc_sync_read(struct pcf50633 *pcf, int mux, int avg);
-
-#endif /* __LINUX_PCF50633_ADC_H */
diff --git a/ANDROID_3.4.5/include/linux/mfd/pcf50633/backlight.h b/ANDROID_3.4.5/include/linux/mfd/pcf50633/backlight.h
deleted file mode 100644
index 83747e21..00000000
--- a/ANDROID_3.4.5/include/linux/mfd/pcf50633/backlight.h
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
- *  Copyright (C) 2009-2010, Lars-Peter Clausen <lars@metafoo.de>
- *      PCF50633 backlight device driver
- *
- *  This program is free software; you can redistribute	 it and/or modify it
- *  under  the terms of	 the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the	License, or (at your
- *  option) any later version.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-#ifndef __LINUX_MFD_PCF50633_BACKLIGHT
-#define __LINUX_MFD_PCF50633_BACKLIGHT
-
-/*
-* @default_brightness: Backlight brightness is initialized to this value
-*
-* Brightness to be used after the driver has been probed.
-* Valid range 0-63.
-*
-* @default_brightness_limit: The actual brightness is limited by this value
-*
-* Brightness limit to be used after the driver has been probed. This is useful
-* when it is not known how much power is available for the backlight during
-* probe.
-* Valid range 0-63. Can be changed later with pcf50633_bl_set_brightness_limit.
-*
-* @ramp_time: Display ramp time when changing brightness
-*
-* When changing the backlights brightness the change is not instant, instead
-* it fades smooth from one state to another. This value specifies how long
-* the fade should take. The lower the value the higher the fade time.
-* Valid range 0-255
-*/
-struct pcf50633_bl_platform_data {
-	unsigned int	default_brightness;
-	unsigned int	default_brightness_limit;
-	uint8_t		ramp_time;
-};
-
-
-struct pcf50633;
-
-int pcf50633_bl_set_brightness_limit(struct pcf50633 *pcf, unsigned int limit);
-
-#endif
-
diff --git a/ANDROID_3.4.5/include/linux/mfd/pcf50633/core.h b/ANDROID_3.4.5/include/linux/mfd/pcf50633/core.h
deleted file mode 100644
index a8084075..00000000
--- a/ANDROID_3.4.5/include/linux/mfd/pcf50633/core.h
+++ /dev/null
@@ -1,238 +0,0 @@
-/*
- * core.h  -- Core driver for NXP PCF50633
- *
- * (C) 2006-2008 by Openmoko, Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#ifndef __LINUX_MFD_PCF50633_CORE_H
-#define __LINUX_MFD_PCF50633_CORE_H
-
-#include <linux/i2c.h>
-#include <linux/workqueue.h>
-#include <linux/regulator/driver.h>
-#include <linux/regulator/machine.h>
-#include <linux/power_supply.h>
-#include <linux/mfd/pcf50633/backlight.h>
-
-struct pcf50633;
-struct regmap;
-
-#define PCF50633_NUM_REGULATORS	11
-
-struct pcf50633_platform_data {
-	struct regulator_init_data reg_init_data[PCF50633_NUM_REGULATORS];
-
-	char **batteries;
-	int num_batteries;
-
-	/*
-	 * Should be set accordingly to the reference resistor used, see
-	 * I_{ch(ref)} charger reference current in the pcf50633 User
-	 * Manual.
-	 */
-	int charger_reference_current_ma;
-
-	/* Callbacks */
-	void (*probe_done)(struct pcf50633 *);
-	void (*mbc_event_callback)(struct pcf50633 *, int);
-	void (*regulator_registered)(struct pcf50633 *, int);
-	void (*force_shutdown)(struct pcf50633 *);
-
-	u8 resumers[5];
-
-	struct pcf50633_bl_platform_data *backlight_data;
-};
-
-struct pcf50633_irq {
-	void (*handler) (int, void *);
-	void *data;
-};
-
-int pcf50633_register_irq(struct pcf50633 *pcf, int irq,
-			void (*handler) (int, void *), void *data);
-int pcf50633_free_irq(struct pcf50633 *pcf, int irq);
-
-int pcf50633_irq_mask(struct pcf50633 *pcf, int irq);
-int pcf50633_irq_unmask(struct pcf50633 *pcf, int irq);
-int pcf50633_irq_mask_get(struct pcf50633 *pcf, int irq);
-
-int pcf50633_read_block(struct pcf50633 *, u8 reg,
-					int nr_regs, u8 *data);
-int pcf50633_write_block(struct pcf50633 *pcf, u8 reg,
-					int nr_regs, u8 *data);
-u8 pcf50633_reg_read(struct pcf50633 *, u8 reg);
-int pcf50633_reg_write(struct pcf50633 *pcf, u8 reg, u8 val);
-
-int pcf50633_reg_set_bit_mask(struct pcf50633 *pcf, u8 reg, u8 mask, u8 val);
-int pcf50633_reg_clear_bits(struct pcf50633 *pcf, u8 reg, u8 bits);
-
-/* Interrupt registers */
-
-#define PCF50633_REG_INT1	0x02
-#define PCF50633_REG_INT2	0x03
-#define PCF50633_REG_INT3	0x04
-#define PCF50633_REG_INT4	0x05
-#define PCF50633_REG_INT5	0x06
-
-#define PCF50633_REG_INT1M	0x07
-#define PCF50633_REG_INT2M	0x08
-#define PCF50633_REG_INT3M	0x09
-#define PCF50633_REG_INT4M	0x0a
-#define PCF50633_REG_INT5M	0x0b
-
-enum {
-	/* Chip IRQs */
-	PCF50633_IRQ_ADPINS,
-	PCF50633_IRQ_ADPREM,
-	PCF50633_IRQ_USBINS,
-	PCF50633_IRQ_USBREM,
-	PCF50633_IRQ_RESERVED1,
-	PCF50633_IRQ_RESERVED2,
-	PCF50633_IRQ_ALARM,
-	PCF50633_IRQ_SECOND,
-	PCF50633_IRQ_ONKEYR,
-	PCF50633_IRQ_ONKEYF,
-	PCF50633_IRQ_EXTON1R,
-	PCF50633_IRQ_EXTON1F,
-	PCF50633_IRQ_EXTON2R,
-	PCF50633_IRQ_EXTON2F,
-	PCF50633_IRQ_EXTON3R,
-	PCF50633_IRQ_EXTON3F,
-	PCF50633_IRQ_BATFULL,
-	PCF50633_IRQ_CHGHALT,
-	PCF50633_IRQ_THLIMON,
-	PCF50633_IRQ_THLIMOFF,
-	PCF50633_IRQ_USBLIMON,
-	PCF50633_IRQ_USBLIMOFF,
-	PCF50633_IRQ_ADCRDY,
-	PCF50633_IRQ_ONKEY1S,
-	PCF50633_IRQ_LOWSYS,
-	PCF50633_IRQ_LOWBAT,
-	PCF50633_IRQ_HIGHTMP,
-	PCF50633_IRQ_AUTOPWRFAIL,
-	PCF50633_IRQ_DWN1PWRFAIL,
-	PCF50633_IRQ_DWN2PWRFAIL,
-	PCF50633_IRQ_LEDPWRFAIL,
-	PCF50633_IRQ_LEDOVP,
-	PCF50633_IRQ_LDO1PWRFAIL,
-	PCF50633_IRQ_LDO2PWRFAIL,
-	PCF50633_IRQ_LDO3PWRFAIL,
-	PCF50633_IRQ_LDO4PWRFAIL,
-	PCF50633_IRQ_LDO5PWRFAIL,
-	PCF50633_IRQ_LDO6PWRFAIL,
-	PCF50633_IRQ_HCLDOPWRFAIL,
-	PCF50633_IRQ_HCLDOOVL,
-
-	/* Always last */
-	PCF50633_NUM_IRQ,
-};
-
-struct pcf50633 {
-	struct device *dev;
-	struct regmap *regmap;
-
-	struct pcf50633_platform_data *pdata;
-	int irq;
-	struct pcf50633_irq irq_handler[PCF50633_NUM_IRQ];
-	struct work_struct irq_work;
-	struct workqueue_struct *work_queue;
-	struct mutex lock;
-
-	u8 mask_regs[5];
-
-	u8 suspend_irq_masks[5];
-	u8 resume_reason[5];
-	int is_suspended;
-
-	int onkey1s_held;
-
-	struct platform_device *rtc_pdev;
-	struct platform_device *mbc_pdev;
-	struct platform_device *adc_pdev;
-	struct platform_device *input_pdev;
-	struct platform_device *bl_pdev;
-	struct platform_device *regulator_pdev[PCF50633_NUM_REGULATORS];
-};
-
-enum pcf50633_reg_int1 {
-	PCF50633_INT1_ADPINS	= 0x01,	/* Adapter inserted */
-	PCF50633_INT1_ADPREM	= 0x02,	/* Adapter removed */
-	PCF50633_INT1_USBINS	= 0x04,	/* USB inserted */
-	PCF50633_INT1_USBREM	= 0x08,	/* USB removed */
-	/* reserved */
-	PCF50633_INT1_ALARM	= 0x40, /* RTC alarm time is reached */
-	PCF50633_INT1_SECOND	= 0x80,	/* RTC periodic second interrupt */
-};
-
-enum pcf50633_reg_int2 {
-	PCF50633_INT2_ONKEYR	= 0x01, /* ONKEY rising edge */
-	PCF50633_INT2_ONKEYF	= 0x02, /* ONKEY falling edge */
-	PCF50633_INT2_EXTON1R	= 0x04, /* EXTON1 rising edge */
-	PCF50633_INT2_EXTON1F	= 0x08, /* EXTON1 falling edge */
-	PCF50633_INT2_EXTON2R	= 0x10, /* EXTON2 rising edge */
-	PCF50633_INT2_EXTON2F	= 0x20, /* EXTON2 falling edge */
-	PCF50633_INT2_EXTON3R	= 0x40, /* EXTON3 rising edge */
-	PCF50633_INT2_EXTON3F	= 0x80, /* EXTON3 falling edge */
-};
-
-enum pcf50633_reg_int3 {
-	PCF50633_INT3_BATFULL	= 0x01, /* Battery full */
-	PCF50633_INT3_CHGHALT	= 0x02,	/* Charger halt */
-	PCF50633_INT3_THLIMON	= 0x04,
-	PCF50633_INT3_THLIMOFF	= 0x08,
-	PCF50633_INT3_USBLIMON	= 0x10,
-	PCF50633_INT3_USBLIMOFF	= 0x20,
-	PCF50633_INT3_ADCRDY	= 0x40, /* ADC result ready */
-	PCF50633_INT3_ONKEY1S	= 0x80,	/* ONKEY pressed 1 second */
-};
-
-enum pcf50633_reg_int4 {
-	PCF50633_INT4_LOWSYS		= 0x01,
-	PCF50633_INT4_LOWBAT		= 0x02,
-	PCF50633_INT4_HIGHTMP		= 0x04,
-	PCF50633_INT4_AUTOPWRFAIL	= 0x08,
-	PCF50633_INT4_DWN1PWRFAIL	= 0x10,
-	PCF50633_INT4_DWN2PWRFAIL	= 0x20,
-	PCF50633_INT4_LEDPWRFAIL	= 0x40,
-	PCF50633_INT4_LEDOVP		= 0x80,
-};
-
-enum pcf50633_reg_int5 {
-	PCF50633_INT5_LDO1PWRFAIL	= 0x01,
-	PCF50633_INT5_LDO2PWRFAIL	= 0x02,
-	PCF50633_INT5_LDO3PWRFAIL	= 0x04,
-	PCF50633_INT5_LDO4PWRFAIL	= 0x08,
-	PCF50633_INT5_LDO5PWRFAIL	= 0x10,
-	PCF50633_INT5_LDO6PWRFAIL	= 0x20,
-	PCF50633_INT5_HCLDOPWRFAIL	= 0x40,
-	PCF50633_INT5_HCLDOOVL		= 0x80,
-};
-
-/* misc. registers */
-#define PCF50633_REG_OOCSHDWN	0x0c
-
-/* LED registers */
-#define PCF50633_REG_LEDOUT 0x28
-#define PCF50633_REG_LEDENA 0x29
-#define PCF50633_REG_LEDCTL 0x2a
-#define PCF50633_REG_LEDDIM 0x2b
-
-static inline struct pcf50633 *dev_to_pcf50633(struct device *dev)
-{
-	return dev_get_drvdata(dev);
-}
-
-int pcf50633_irq_init(struct pcf50633 *pcf, int irq);
-void pcf50633_irq_free(struct pcf50633 *pcf);
-#ifdef CONFIG_PM
-int pcf50633_irq_suspend(struct pcf50633 *pcf);
-int pcf50633_irq_resume(struct pcf50633 *pcf);
-#endif
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/mfd/pcf50633/gpio.h b/ANDROID_3.4.5/include/linux/mfd/pcf50633/gpio.h
deleted file mode 100644
index a42b845e..00000000
--- a/ANDROID_3.4.5/include/linux/mfd/pcf50633/gpio.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- * gpio.h -- GPIO driver for NXP PCF50633
- *
- * (C) 2006-2008 by Openmoko, Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#ifndef __LINUX_MFD_PCF50633_GPIO_H
-#define __LINUX_MFD_PCF50633_GPIO_H
-
-#include <linux/mfd/pcf50633/core.h>
-
-#define PCF50633_GPIO1		1
-#define PCF50633_GPIO2		2
-#define PCF50633_GPIO3		3
-#define PCF50633_GPO		4
-
-#define PCF50633_REG_GPIO1CFG	0x14
-#define PCF50633_REG_GPIO2CFG	0x15
-#define PCF50633_REG_GPIO3CFG	0x16
-#define PCF50633_REG_GPOCFG 	0x17
-
-#define PCF50633_GPOCFG_GPOSEL_MASK	0x07
-
-enum pcf50633_reg_gpocfg {
-	PCF50633_GPOCFG_GPOSEL_0	= 0x00,
-	PCF50633_GPOCFG_GPOSEL_LED_NFET	= 0x01,
-	PCF50633_GPOCFG_GPOSEL_SYSxOK	= 0x02,
-	PCF50633_GPOCFG_GPOSEL_CLK32K	= 0x03,
-	PCF50633_GPOCFG_GPOSEL_ADAPUSB	= 0x04,
-	PCF50633_GPOCFG_GPOSEL_USBxOK	= 0x05,
-	PCF50633_GPOCFG_GPOSEL_ACTPH4	= 0x06,
-	PCF50633_GPOCFG_GPOSEL_1	= 0x07,
-	PCF50633_GPOCFG_GPOSEL_INVERSE	= 0x08,
-};
-
-int pcf50633_gpio_set(struct pcf50633 *pcf, int gpio, u8 val);
-u8 pcf50633_gpio_get(struct pcf50633 *pcf, int gpio);
-
-int pcf50633_gpio_invert_set(struct pcf50633 *, int gpio, int invert);
-int pcf50633_gpio_invert_get(struct pcf50633 *pcf, int gpio);
-
-int pcf50633_gpio_power_supply_set(struct pcf50633 *,
-					int gpio, int regulator, int on);
-#endif /* __LINUX_MFD_PCF50633_GPIO_H */
-
-
diff --git a/ANDROID_3.4.5/include/linux/mfd/pcf50633/mbc.h b/ANDROID_3.4.5/include/linux/mfd/pcf50633/mbc.h
deleted file mode 100644
index df4f5fa8..00000000
--- a/ANDROID_3.4.5/include/linux/mfd/pcf50633/mbc.h
+++ /dev/null
@@ -1,134 +0,0 @@
-/*
- * mbc.h  -- Driver for NXP PCF50633 Main Battery Charger
- *
- * (C) 2006-2008 by Openmoko, Inc.
- * All rights reserved.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#ifndef __LINUX_MFD_PCF50633_MBC_H
-#define __LINUX_MFD_PCF50633_MBC_H
-
-#include <linux/mfd/pcf50633/core.h>
-#include <linux/platform_device.h>
-
-#define PCF50633_REG_MBCC1	0x43
-#define PCF50633_REG_MBCC2	0x44
-#define PCF50633_REG_MBCC3	0x45
-#define PCF50633_REG_MBCC4	0x46
-#define PCF50633_REG_MBCC5	0x47
-#define PCF50633_REG_MBCC6	0x48
-#define PCF50633_REG_MBCC7	0x49
-#define PCF50633_REG_MBCC8	0x4a
-#define PCF50633_REG_MBCS1	0x4b
-#define PCF50633_REG_MBCS2	0x4c
-#define PCF50633_REG_MBCS3	0x4d
-
-enum pcf50633_reg_mbcc1 {
-	PCF50633_MBCC1_CHGENA		= 0x01,	/* Charger enable */
-	PCF50633_MBCC1_AUTOSTOP		= 0x02,
-	PCF50633_MBCC1_AUTORES		= 0x04, /* automatic resume */
-	PCF50633_MBCC1_RESUME		= 0x08, /* explicit resume cmd */
-	PCF50633_MBCC1_RESTART		= 0x10, /* restart charging */
-	PCF50633_MBCC1_PREWDTIME_60M	= 0x20,	/* max. precharging time */
-	PCF50633_MBCC1_WDTIME_1H	= 0x00,
-	PCF50633_MBCC1_WDTIME_2H	= 0x40,
-	PCF50633_MBCC1_WDTIME_4H	= 0x80,
-	PCF50633_MBCC1_WDTIME_6H	= 0xc0,
-};
-#define PCF50633_MBCC1_WDTIME_MASK	  0xc0
-
-enum pcf50633_reg_mbcc2 {
-	PCF50633_MBCC2_VBATCOND_2V7	= 0x00,
-	PCF50633_MBCC2_VBATCOND_2V85	= 0x01,
-	PCF50633_MBCC2_VBATCOND_3V0	= 0x02,
-	PCF50633_MBCC2_VBATCOND_3V15	= 0x03,
-	PCF50633_MBCC2_VMAX_4V		= 0x00,
-	PCF50633_MBCC2_VMAX_4V20	= 0x28,
-	PCF50633_MBCC2_VRESDEBTIME_64S	= 0x80,	/* debounce time (32/64sec) */
-};
-
-enum pcf50633_reg_mbcc7 {
-	PCF50633_MBCC7_USB_100mA	= 0x00,
-	PCF50633_MBCC7_USB_500mA	= 0x01,
-	PCF50633_MBCC7_USB_1000mA	= 0x02,
-	PCF50633_MBCC7_USB_SUSPEND	= 0x03,
-	PCF50633_MBCC7_BATTEMP_EN	= 0x04,
-	PCF50633_MBCC7_BATSYSIMAX_1A6	= 0x00,
-	PCF50633_MBCC7_BATSYSIMAX_1A8	= 0x40,
-	PCF50633_MBCC7_BATSYSIMAX_2A0	= 0x80,
-	PCF50633_MBCC7_BATSYSIMAX_2A2	= 0xc0,
-};
-#define PCF50633_MBCC7_USB_MASK 0x03
-
-enum pcf50633_reg_mbcc8 {
-	PCF50633_MBCC8_USBENASUS	= 0x10,
-};
-
-enum pcf50633_reg_mbcs1 {
-	PCF50633_MBCS1_USBPRES		= 0x01,
-	PCF50633_MBCS1_USBOK		= 0x02,
-	PCF50633_MBCS1_ADAPTPRES	= 0x04,
-	PCF50633_MBCS1_ADAPTOK		= 0x08,
-	PCF50633_MBCS1_TBAT_OK		= 0x00,
-	PCF50633_MBCS1_TBAT_ABOVE	= 0x10,
-	PCF50633_MBCS1_TBAT_BELOW	= 0x20,
-	PCF50633_MBCS1_TBAT_UNDEF	= 0x30,
-	PCF50633_MBCS1_PREWDTEXP	= 0x40,
-	PCF50633_MBCS1_WDTEXP		= 0x80,
-};
-
-enum pcf50633_reg_mbcs2_mbcmod {
-	PCF50633_MBCS2_MBC_PLAY		= 0x00,
-	PCF50633_MBCS2_MBC_USB_PRE	= 0x01,
-	PCF50633_MBCS2_MBC_USB_PRE_WAIT	= 0x02,
-	PCF50633_MBCS2_MBC_USB_FAST	= 0x03,
-	PCF50633_MBCS2_MBC_USB_FAST_WAIT = 0x04,
-	PCF50633_MBCS2_MBC_USB_SUSPEND	= 0x05,
-	PCF50633_MBCS2_MBC_ADP_PRE	= 0x06,
-	PCF50633_MBCS2_MBC_ADP_PRE_WAIT	= 0x07,
-	PCF50633_MBCS2_MBC_ADP_FAST	= 0x08,
-	PCF50633_MBCS2_MBC_ADP_FAST_WAIT = 0x09,
-	PCF50633_MBCS2_MBC_BAT_FULL	= 0x0a,
-	PCF50633_MBCS2_MBC_HALT		= 0x0b,
-};
-#define PCF50633_MBCS2_MBC_MASK		0x0f
-enum pcf50633_reg_mbcs2_chgstat {
-	PCF50633_MBCS2_CHGS_NONE	= 0x00,
-	PCF50633_MBCS2_CHGS_ADAPTER	= 0x10,
-	PCF50633_MBCS2_CHGS_USB		= 0x20,
-	PCF50633_MBCS2_CHGS_BOTH	= 0x30,
-};
-#define PCF50633_MBCS2_RESSTAT_AUTO	0x40
-
-enum pcf50633_reg_mbcs3 {
-	PCF50633_MBCS3_USBLIM_PLAY	= 0x01,
-	PCF50633_MBCS3_USBLIM_CGH	= 0x02,
-	PCF50633_MBCS3_TLIM_PLAY	= 0x04,
-	PCF50633_MBCS3_TLIM_CHG		= 0x08,
-	PCF50633_MBCS3_ILIM		= 0x10,	/* 1: Ibat > Icutoff */
-	PCF50633_MBCS3_VLIM		= 0x20,	/* 1: Vbat == Vmax */
-	PCF50633_MBCS3_VBATSTAT		= 0x40,	/* 1: Vbat > Vbatcond */
-	PCF50633_MBCS3_VRES		= 0x80, /* 1: Vbat > Vth(RES) */
-};
-
-#define PCF50633_MBCC2_VBATCOND_MASK	  0x03
-#define PCF50633_MBCC2_VMAX_MASK	  0x3c
-
-/* Charger status */
-#define PCF50633_MBC_USB_ONLINE		0x01
-#define PCF50633_MBC_USB_ACTIVE		0x02
-#define PCF50633_MBC_ADAPTER_ONLINE	0x04
-#define PCF50633_MBC_ADAPTER_ACTIVE	0x08
-
-int pcf50633_mbc_usb_curlim_set(struct pcf50633 *pcf, int ma);
-
-int pcf50633_mbc_get_status(struct pcf50633 *);
-int pcf50633_mbc_get_usb_online_status(struct pcf50633 *);
-
-#endif
-
diff --git a/ANDROID_3.4.5/include/linux/mfd/pcf50633/pmic.h b/ANDROID_3.4.5/include/linux/mfd/pcf50633/pmic.h
deleted file mode 100644
index 2d3dbe53..00000000
--- a/ANDROID_3.4.5/include/linux/mfd/pcf50633/pmic.h
+++ /dev/null
@@ -1,67 +0,0 @@
-#ifndef __LINUX_MFD_PCF50633_PMIC_H
-#define __LINUX_MFD_PCF50633_PMIC_H
-
-#include <linux/mfd/pcf50633/core.h>
-#include <linux/platform_device.h>
-
-#define PCF50633_REG_AUTOOUT	0x1a
-#define PCF50633_REG_AUTOENA	0x1b
-#define PCF50633_REG_AUTOCTL	0x1c
-#define PCF50633_REG_AUTOMXC	0x1d
-#define PCF50633_REG_DOWN1OUT	0x1e
-#define PCF50633_REG_DOWN1ENA	0x1f
-#define PCF50633_REG_DOWN1CTL	0x20
-#define PCF50633_REG_DOWN1MXC	0x21
-#define PCF50633_REG_DOWN2OUT	0x22
-#define PCF50633_REG_DOWN2ENA	0x23
-#define PCF50633_REG_DOWN2CTL	0x24
-#define PCF50633_REG_DOWN2MXC	0x25
-#define PCF50633_REG_MEMLDOOUT	0x26
-#define PCF50633_REG_MEMLDOENA	0x27
-#define PCF50633_REG_LDO1OUT	0x2d
-#define PCF50633_REG_LDO1ENA	0x2e
-#define PCF50633_REG_LDO2OUT	0x2f
-#define PCF50633_REG_LDO2ENA	0x30
-#define PCF50633_REG_LDO3OUT	0x31
-#define PCF50633_REG_LDO3ENA	0x32
-#define PCF50633_REG_LDO4OUT	0x33
-#define PCF50633_REG_LDO4ENA	0x34
-#define PCF50633_REG_LDO5OUT	0x35
-#define PCF50633_REG_LDO5ENA	0x36
-#define PCF50633_REG_LDO6OUT	0x37
-#define PCF50633_REG_LDO6ENA	0x38
-#define PCF50633_REG_HCLDOOUT	0x39
-#define PCF50633_REG_HCLDOENA	0x3a
-#define PCF50633_REG_HCLDOOVL	0x40
-
-enum pcf50633_regulator_enable {
-	PCF50633_REGULATOR_ON		= 0x01,
-	PCF50633_REGULATOR_ON_GPIO1	= 0x02,
-	PCF50633_REGULATOR_ON_GPIO2	= 0x04,
-	PCF50633_REGULATOR_ON_GPIO3	= 0x08,
-};
-#define PCF50633_REGULATOR_ON_MASK	0x0f
-
-enum pcf50633_regulator_phase {
-	PCF50633_REGULATOR_ACTPH1	= 0x00,
-	PCF50633_REGULATOR_ACTPH2	= 0x10,
-	PCF50633_REGULATOR_ACTPH3	= 0x20,
-	PCF50633_REGULATOR_ACTPH4	= 0x30,
-};
-#define PCF50633_REGULATOR_ACTPH_MASK	0x30
-
-enum pcf50633_regulator_id {
-	PCF50633_REGULATOR_AUTO,
-	PCF50633_REGULATOR_DOWN1,
-	PCF50633_REGULATOR_DOWN2,
-	PCF50633_REGULATOR_LDO1,
-	PCF50633_REGULATOR_LDO2,
-	PCF50633_REGULATOR_LDO3,
-	PCF50633_REGULATOR_LDO4,
-	PCF50633_REGULATOR_LDO5,
-	PCF50633_REGULATOR_LDO6,
-	PCF50633_REGULATOR_HCLDO,
-	PCF50633_REGULATOR_MEMLDO,
-};
-#endif
-
diff --git a/ANDROID_3.4.5/include/linux/mfd/pm8xxx/core.h b/ANDROID_3.4.5/include/linux/mfd/pm8xxx/core.h
deleted file mode 100644
index bd2f4f64..00000000
--- a/ANDROID_3.4.5/include/linux/mfd/pm8xxx/core.h
+++ /dev/null
@@ -1,81 +0,0 @@
-/*
- * Copyright (c) 2011, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-/*
- * Qualcomm PMIC 8xxx driver header file
- *
- */
-
-#ifndef __MFD_PM8XXX_CORE_H
-#define __MFD_PM8XXX_CORE_H
-
-#include <linux/mfd/core.h>
-
-struct pm8xxx_drvdata {
-	int	(*pmic_readb) (const struct device *dev, u16 addr, u8 *val);
-	int	(*pmic_writeb) (const struct device *dev, u16 addr, u8 val);
-	int	(*pmic_read_buf) (const struct device *dev, u16 addr, u8 *buf,
-									int n);
-	int	(*pmic_write_buf) (const struct device *dev, u16 addr, u8 *buf,
-									int n);
-	int	(*pmic_read_irq_stat) (const struct device *dev, int irq);
-	void	*pm_chip_data;
-};
-
-static inline int pm8xxx_readb(const struct device *dev, u16 addr, u8 *val)
-{
-	struct pm8xxx_drvdata *dd = dev_get_drvdata(dev);
-
-	if (!dd)
-		return -EINVAL;
-	return dd->pmic_readb(dev, addr, val);
-}
-
-static inline int pm8xxx_writeb(const struct device *dev, u16 addr, u8 val)
-{
-	struct pm8xxx_drvdata *dd = dev_get_drvdata(dev);
-
-	if (!dd)
-		return -EINVAL;
-	return dd->pmic_writeb(dev, addr, val);
-}
-
-static inline int pm8xxx_read_buf(const struct device *dev, u16 addr, u8 *buf,
-									int n)
-{
-	struct pm8xxx_drvdata *dd = dev_get_drvdata(dev);
-
-	if (!dd)
-		return -EINVAL;
-	return dd->pmic_read_buf(dev, addr, buf, n);
-}
-
-static inline int pm8xxx_write_buf(const struct device *dev, u16 addr, u8 *buf,
-									int n)
-{
-	struct pm8xxx_drvdata *dd = dev_get_drvdata(dev);
-
-	if (!dd)
-		return -EINVAL;
-	return dd->pmic_write_buf(dev, addr, buf, n);
-}
-
-static inline int pm8xxx_read_irq_stat(const struct device *dev, int irq)
-{
-	struct pm8xxx_drvdata *dd = dev_get_drvdata(dev);
-
-	if (!dd)
-		return -EINVAL;
-	return dd->pmic_read_irq_stat(dev, irq);
-}
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/mfd/pm8xxx/irq.h b/ANDROID_3.4.5/include/linux/mfd/pm8xxx/irq.h
deleted file mode 100644
index 4b21769f..00000000
--- a/ANDROID_3.4.5/include/linux/mfd/pm8xxx/irq.h
+++ /dev/null
@@ -1,59 +0,0 @@
-/*
- * Copyright (c) 2011, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-/*
- * Qualcomm PMIC irq 8xxx driver header file
- *
- */
-
-#ifndef __MFD_PM8XXX_IRQ_H
-#define __MFD_PM8XXX_IRQ_H
-
-#include <linux/errno.h>
-#include <linux/err.h>
-
-struct pm8xxx_irq_core_data {
-	u32		rev;
-	int		nirqs;
-};
-
-struct pm8xxx_irq_platform_data {
-	int				irq_base;
-	struct pm8xxx_irq_core_data	irq_cdata;
-	int				devirq;
-	int				irq_trigger_flag;
-};
-
-struct pm_irq_chip;
-
-#ifdef CONFIG_MFD_PM8XXX_IRQ
-int pm8xxx_get_irq_stat(struct pm_irq_chip *chip, int irq);
-struct pm_irq_chip * __devinit pm8xxx_irq_init(struct device *dev,
-				const struct pm8xxx_irq_platform_data *pdata);
-int __devexit pm8xxx_irq_exit(struct pm_irq_chip *chip);
-#else
-static inline int pm8xxx_get_irq_stat(struct pm_irq_chip *chip, int irq)
-{
-	return -ENXIO;
-}
-static inline struct pm_irq_chip * __devinit pm8xxx_irq_init(
-				const struct device *dev,
-				const struct pm8xxx_irq_platform_data *pdata)
-{
-	return ERR_PTR(-ENXIO);
-}
-static inline int __devexit pm8xxx_irq_exit(struct pm_irq_chip *chip)
-{
-	return -ENXIO;
-}
-#endif /* CONFIG_MFD_PM8XXX_IRQ */
-#endif /* __MFD_PM8XXX_IRQ_H */
diff --git a/ANDROID_3.4.5/include/linux/mfd/pm8xxx/pm8921.h b/ANDROID_3.4.5/include/linux/mfd/pm8xxx/pm8921.h
deleted file mode 100644
index 00fa3de7..00000000
--- a/ANDROID_3.4.5/include/linux/mfd/pm8xxx/pm8921.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
- * Copyright (c) 2011, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-/*
- * Qualcomm PMIC 8921 driver header file
- *
- */
-
-#ifndef __MFD_PM8921_H
-#define __MFD_PM8921_H
-
-#include <linux/mfd/pm8xxx/irq.h>
-
-#define PM8921_NR_IRQS		256
-
-struct pm8921_platform_data {
-	int					irq_base;
-	struct pm8xxx_irq_platform_data		*irq_pdata;
-};
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/mfd/pm8xxx/rtc.h b/ANDROID_3.4.5/include/linux/mfd/pm8xxx/rtc.h
deleted file mode 100644
index 14f1983e..00000000
--- a/ANDROID_3.4.5/include/linux/mfd/pm8xxx/rtc.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/* Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#ifndef __RTC_PM8XXX_H__
-#define __RTC_PM8XXX_H__
-
-#define PM8XXX_RTC_DEV_NAME     "rtc-pm8xxx"
-/**
- * struct pm8xxx_rtc_pdata - RTC driver platform data
- * @rtc_write_enable: variable stating RTC write capability
- */
-struct pm8xxx_rtc_platform_data {
-	bool rtc_write_enable;
-};
-
-#endif /* __RTC_PM8XXX_H__ */
diff --git a/ANDROID_3.4.5/include/linux/mfd/rc5t583.h b/ANDROID_3.4.5/include/linux/mfd/rc5t583.h
deleted file mode 100644
index 0b64b19d..00000000
--- a/ANDROID_3.4.5/include/linux/mfd/rc5t583.h
+++ /dev/null
@@ -1,326 +0,0 @@
-/*
- * Core driver interface to access RICOH_RC5T583 power management chip.
- *
- * Copyright (c) 2011-2012, NVIDIA CORPORATION.  All rights reserved.
- * Author: Laxman dewangan <ldewangan@nvidia.com>
- *
- * Based on code
- *      Copyright (C) 2011 RICOH COMPANY,LTD
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- *
- */
-
-#ifndef __LINUX_MFD_RC5T583_H
-#define __LINUX_MFD_RC5T583_H
-
-#include <linux/mutex.h>
-#include <linux/types.h>
-#include <linux/regmap.h>
-
-#define RC5T583_MAX_REGS		0xF8
-
-/* Maximum number of main interrupts */
-#define MAX_MAIN_INTERRUPT		5
-#define RC5T583_MAX_GPEDGE_REG		2
-#define RC5T583_MAX_INTERRUPT_MASK_REGS	9
-
-/* Interrupt enable register */
-#define RC5T583_INT_EN_SYS1	0x19
-#define RC5T583_INT_EN_SYS2	0x1D
-#define RC5T583_INT_EN_DCDC	0x41
-#define RC5T583_INT_EN_RTC	0xED
-#define RC5T583_INT_EN_ADC1	0x90
-#define RC5T583_INT_EN_ADC2	0x91
-#define RC5T583_INT_EN_ADC3	0x92
-
-/* Interrupt status registers (monitor regs in Ricoh)*/
-#define RC5T583_INTC_INTPOL	0xAD
-#define RC5T583_INTC_INTEN	0xAE
-#define RC5T583_INTC_INTMON	0xAF
-
-#define RC5T583_INT_MON_GRP	0xAF
-#define RC5T583_INT_MON_SYS1	0x1B
-#define RC5T583_INT_MON_SYS2	0x1F
-#define RC5T583_INT_MON_DCDC	0x43
-#define RC5T583_INT_MON_RTC	0xEE
-
-/* Interrupt clearing registers */
-#define RC5T583_INT_IR_SYS1	0x1A
-#define RC5T583_INT_IR_SYS2	0x1E
-#define RC5T583_INT_IR_DCDC	0x42
-#define RC5T583_INT_IR_RTC	0xEE
-#define RC5T583_INT_IR_ADCL	0x94
-#define RC5T583_INT_IR_ADCH	0x95
-#define RC5T583_INT_IR_ADCEND	0x96
-#define RC5T583_INT_IR_GPIOR	0xA9
-#define RC5T583_INT_IR_GPIOF	0xAA
-
-/* Sleep sequence registers */
-#define RC5T583_SLPSEQ1		0x21
-#define RC5T583_SLPSEQ2		0x22
-#define RC5T583_SLPSEQ3		0x23
-#define RC5T583_SLPSEQ4		0x24
-#define RC5T583_SLPSEQ5		0x25
-#define RC5T583_SLPSEQ6		0x26
-#define RC5T583_SLPSEQ7		0x27
-#define RC5T583_SLPSEQ8		0x28
-#define RC5T583_SLPSEQ9		0x29
-#define RC5T583_SLPSEQ10	0x2A
-#define RC5T583_SLPSEQ11	0x2B
-
-/* Regulator registers */
-#define RC5T583_REG_DC0CTL	0x30
-#define RC5T583_REG_DC0DAC	0x31
-#define RC5T583_REG_DC0LATCTL	0x32
-#define RC5T583_REG_SR0CTL	0x33
-
-#define RC5T583_REG_DC1CTL	0x34
-#define RC5T583_REG_DC1DAC	0x35
-#define RC5T583_REG_DC1LATCTL	0x36
-#define RC5T583_REG_SR1CTL	0x37
-
-#define RC5T583_REG_DC2CTL	0x38
-#define RC5T583_REG_DC2DAC	0x39
-#define RC5T583_REG_DC2LATCTL	0x3A
-#define RC5T583_REG_SR2CTL	0x3B
-
-#define RC5T583_REG_DC3CTL	0x3C
-#define RC5T583_REG_DC3DAC	0x3D
-#define RC5T583_REG_DC3LATCTL	0x3E
-#define RC5T583_REG_SR3CTL	0x3F
-
-
-#define RC5T583_REG_LDOEN1	0x50
-#define RC5T583_REG_LDOEN2	0x51
-#define RC5T583_REG_LDODIS1	0x52
-#define RC5T583_REG_LDODIS2	0x53
-
-#define RC5T583_REG_LDO0DAC	0x54
-#define RC5T583_REG_LDO1DAC	0x55
-#define RC5T583_REG_LDO2DAC	0x56
-#define RC5T583_REG_LDO3DAC	0x57
-#define RC5T583_REG_LDO4DAC	0x58
-#define RC5T583_REG_LDO5DAC	0x59
-#define RC5T583_REG_LDO6DAC	0x5A
-#define RC5T583_REG_LDO7DAC	0x5B
-#define RC5T583_REG_LDO8DAC	0x5C
-#define RC5T583_REG_LDO9DAC	0x5D
-
-#define RC5T583_REG_DC0DAC_DS	0x60
-#define RC5T583_REG_DC1DAC_DS	0x61
-#define RC5T583_REG_DC2DAC_DS	0x62
-#define RC5T583_REG_DC3DAC_DS	0x63
-
-#define RC5T583_REG_LDO0DAC_DS	0x64
-#define RC5T583_REG_LDO1DAC_DS	0x65
-#define RC5T583_REG_LDO2DAC_DS	0x66
-#define RC5T583_REG_LDO3DAC_DS	0x67
-#define RC5T583_REG_LDO4DAC_DS	0x68
-#define RC5T583_REG_LDO5DAC_DS	0x69
-#define RC5T583_REG_LDO6DAC_DS	0x6A
-#define RC5T583_REG_LDO7DAC_DS	0x6B
-#define RC5T583_REG_LDO8DAC_DS	0x6C
-#define RC5T583_REG_LDO9DAC_DS	0x6D
-
-/* GPIO register base address */
-#define RC5T583_GPIO_IOSEL	0xA0
-#define RC5T583_GPIO_PDEN	0xA1
-#define RC5T583_GPIO_IOOUT	0xA2
-#define RC5T583_GPIO_PGSEL	0xA3
-#define RC5T583_GPIO_GPINV	0xA4
-#define RC5T583_GPIO_GPDEB	0xA5
-#define RC5T583_GPIO_GPEDGE1	0xA6
-#define RC5T583_GPIO_GPEDGE2	0xA7
-#define RC5T583_GPIO_EN_INT	0xA8
-#define RC5T583_GPIO_MON_IOIN	0xAB
-#define RC5T583_GPIO_GPOFUNC	0xAC
-
-/* RICOH_RC5T583 IRQ definitions */
-enum {
-	RC5T583_IRQ_ONKEY,
-	RC5T583_IRQ_ACOK,
-	RC5T583_IRQ_LIDOPEN,
-	RC5T583_IRQ_PREOT,
-	RC5T583_IRQ_CLKSTP,
-	RC5T583_IRQ_ONKEY_OFF,
-	RC5T583_IRQ_WD,
-	RC5T583_IRQ_EN_PWRREQ1,
-	RC5T583_IRQ_EN_PWRREQ2,
-	RC5T583_IRQ_PRE_VINDET,
-
-	RC5T583_IRQ_DC0LIM,
-	RC5T583_IRQ_DC1LIM,
-	RC5T583_IRQ_DC2LIM,
-	RC5T583_IRQ_DC3LIM,
-
-	RC5T583_IRQ_CTC,
-	RC5T583_IRQ_YALE,
-	RC5T583_IRQ_DALE,
-	RC5T583_IRQ_WALE,
-
-	RC5T583_IRQ_AIN1L,
-	RC5T583_IRQ_AIN2L,
-	RC5T583_IRQ_AIN3L,
-	RC5T583_IRQ_VBATL,
-	RC5T583_IRQ_VIN3L,
-	RC5T583_IRQ_VIN8L,
-	RC5T583_IRQ_AIN1H,
-	RC5T583_IRQ_AIN2H,
-	RC5T583_IRQ_AIN3H,
-	RC5T583_IRQ_VBATH,
-	RC5T583_IRQ_VIN3H,
-	RC5T583_IRQ_VIN8H,
-	RC5T583_IRQ_ADCEND,
-
-	RC5T583_IRQ_GPIO0,
-	RC5T583_IRQ_GPIO1,
-	RC5T583_IRQ_GPIO2,
-	RC5T583_IRQ_GPIO3,
-	RC5T583_IRQ_GPIO4,
-	RC5T583_IRQ_GPIO5,
-	RC5T583_IRQ_GPIO6,
-	RC5T583_IRQ_GPIO7,
-
-	/* Should be last entry */
-	RC5T583_MAX_IRQS,
-};
-
-/* Ricoh583 gpio definitions */
-enum {
-	RC5T583_GPIO0,
-	RC5T583_GPIO1,
-	RC5T583_GPIO2,
-	RC5T583_GPIO3,
-	RC5T583_GPIO4,
-	RC5T583_GPIO5,
-	RC5T583_GPIO6,
-	RC5T583_GPIO7,
-
-	/* Should be last entry */
-	RC5T583_MAX_GPIO,
-};
-
-enum {
-	RC5T583_DS_NONE,
-	RC5T583_DS_DC0,
-	RC5T583_DS_DC1,
-	RC5T583_DS_DC2,
-	RC5T583_DS_DC3,
-	RC5T583_DS_LDO0,
-	RC5T583_DS_LDO1,
-	RC5T583_DS_LDO2,
-	RC5T583_DS_LDO3,
-	RC5T583_DS_LDO4,
-	RC5T583_DS_LDO5,
-	RC5T583_DS_LDO6,
-	RC5T583_DS_LDO7,
-	RC5T583_DS_LDO8,
-	RC5T583_DS_LDO9,
-	RC5T583_DS_PSO0,
-	RC5T583_DS_PSO1,
-	RC5T583_DS_PSO2,
-	RC5T583_DS_PSO3,
-	RC5T583_DS_PSO4,
-	RC5T583_DS_PSO5,
-	RC5T583_DS_PSO6,
-	RC5T583_DS_PSO7,
-
-	/* Should be last entry */
-	RC5T583_DS_MAX,
-};
-
-/*
- * Ricoh pmic RC5T583 supports sleep through two external controls.
- * The output of gpios and regulator can be enable/disable through
- * this external signals.
- */
-enum {
-	RC5T583_EXT_PWRREQ1_CONTROL = 0x1,
-	RC5T583_EXT_PWRREQ2_CONTROL = 0x2,
-};
-
-struct rc5t583 {
-	struct device	*dev;
-	struct regmap	*regmap;
-	int		chip_irq;
-	int		irq_base;
-	struct mutex	irq_lock;
-	unsigned long	group_irq_en[MAX_MAIN_INTERRUPT];
-
-	/* For main interrupt bits in INTC */
-	uint8_t		intc_inten_reg;
-
-	/* For group interrupt bits and address */
-	uint8_t		irq_en_reg[RC5T583_MAX_INTERRUPT_MASK_REGS];
-
-	/* For gpio edge */
-	uint8_t		gpedge_reg[RC5T583_MAX_GPEDGE_REG];
-};
-
-/*
- * rc5t583_platform_data: Platform data for ricoh rc5t583 pmu.
- * The board specific data is provided through this structure.
- * @irq_base: Irq base number on which this device registers their interrupts.
- * @enable_shutdown: Enable shutdown through the input pin "shutdown".
- */
-
-struct rc5t583_platform_data {
-	int		irq_base;
-	bool		enable_shutdown;
-};
-
-static inline int rc5t583_write(struct device *dev, uint8_t reg, uint8_t val)
-{
-	struct rc5t583 *rc5t583 = dev_get_drvdata(dev);
-	return regmap_write(rc5t583->regmap, reg, val);
-}
-
-static inline int rc5t583_read(struct device *dev, uint8_t reg, uint8_t *val)
-{
-	struct rc5t583 *rc5t583 = dev_get_drvdata(dev);
-	unsigned int ival;
-	int ret;
-	ret = regmap_read(rc5t583->regmap, reg, &ival);
-	if (!ret)
-		*val = (uint8_t)ival;
-	return ret;
-}
-
-static inline int rc5t583_set_bits(struct device *dev, unsigned int reg,
-			unsigned int bit_mask)
-{
-	struct rc5t583 *rc5t583 = dev_get_drvdata(dev);
-	return regmap_update_bits(rc5t583->regmap, reg, bit_mask, bit_mask);
-}
-
-static inline int rc5t583_clear_bits(struct device *dev, unsigned int reg,
-			unsigned int bit_mask)
-{
-	struct rc5t583 *rc5t583 = dev_get_drvdata(dev);
-	return regmap_update_bits(rc5t583->regmap, reg, bit_mask, 0);
-}
-
-static inline int rc5t583_update(struct device *dev, unsigned int reg,
-		unsigned int val, unsigned int mask)
-{
-	struct rc5t583 *rc5t583 = dev_get_drvdata(dev);
-	return regmap_update_bits(rc5t583->regmap, reg, mask, val);
-}
-
-int rc5t583_ext_power_req_config(struct device *dev, int deepsleep_id,
-	int ext_pwr_req, int deepsleep_slot_nr);
-int rc5t583_irq_init(struct rc5t583 *rc5t583, int irq, int irq_base);
-int rc5t583_irq_exit(struct rc5t583 *rc5t583);
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/mfd/rdc321x.h b/ANDROID_3.4.5/include/linux/mfd/rdc321x.h
deleted file mode 100644
index 4bdf19c8..00000000
--- a/ANDROID_3.4.5/include/linux/mfd/rdc321x.h
+++ /dev/null
@@ -1,26 +0,0 @@
-#ifndef __RDC321X_MFD_H
-#define __RDC321X_MFD_H
-
-#include <linux/types.h>
-#include <linux/pci.h>
-
-/* Offsets to be accessed in the southbridge PCI
- * device configuration register */
-#define RDC321X_WDT_CTRL	0x44
-#define RDC321X_GPIO_CTRL_REG1	0x48
-#define RDC321X_GPIO_DATA_REG1	0x4c
-#define RDC321X_GPIO_CTRL_REG2	0x84
-#define RDC321X_GPIO_DATA_REG2	0x88
-
-#define RDC321X_MAX_GPIO	58
-
-struct rdc321x_gpio_pdata {
-	struct pci_dev *sb_pdev;
-	unsigned max_gpios;
-};
-
-struct rdc321x_wdt_pdata {
-	struct pci_dev *sb_pdev;
-};
-
-#endif /* __RDC321X_MFD_H */
diff --git a/ANDROID_3.4.5/include/linux/mfd/s5m87xx/s5m-core.h b/ANDROID_3.4.5/include/linux/mfd/s5m87xx/s5m-core.h
deleted file mode 100644
index a7480b57..00000000
--- a/ANDROID_3.4.5/include/linux/mfd/s5m87xx/s5m-core.h
+++ /dev/null
@@ -1,373 +0,0 @@
-/*
- * s5m-core.h
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd
- *              http://www.samsung.com
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- */
-
-#ifndef __LINUX_MFD_S5M_CORE_H
-#define __LINUX_MFD_S5M_CORE_H
-
-#define NUM_IRQ_REGS	4
-
-enum s5m_device_type {
-	S5M8751X,
-	S5M8763X,
-	S5M8767X,
-};
-
-/* S5M8767 registers */
-enum s5m8767_reg {
-	S5M8767_REG_ID,
-	S5M8767_REG_INT1,
-	S5M8767_REG_INT2,
-	S5M8767_REG_INT3,
-	S5M8767_REG_INT1M,
-	S5M8767_REG_INT2M,
-	S5M8767_REG_INT3M,
-	S5M8767_REG_STATUS1,
-	S5M8767_REG_STATUS2,
-	S5M8767_REG_STATUS3,
-	S5M8767_REG_CTRL1,
-	S5M8767_REG_CTRL2,
-	S5M8767_REG_LOWBAT1,
-	S5M8767_REG_LOWBAT2,
-	S5M8767_REG_BUCHG,
-	S5M8767_REG_DVSRAMP,
-	S5M8767_REG_DVSTIMER2 = 0x10,
-	S5M8767_REG_DVSTIMER3,
-	S5M8767_REG_DVSTIMER4,
-	S5M8767_REG_LDO1,
-	S5M8767_REG_LDO2,
-	S5M8767_REG_LDO3,
-	S5M8767_REG_LDO4,
-	S5M8767_REG_LDO5,
-	S5M8767_REG_LDO6,
-	S5M8767_REG_LDO7,
-	S5M8767_REG_LDO8,
-	S5M8767_REG_LDO9,
-	S5M8767_REG_LDO10,
-	S5M8767_REG_LDO11,
-	S5M8767_REG_LDO12,
-	S5M8767_REG_LDO13,
-	S5M8767_REG_LDO14 = 0x20,
-	S5M8767_REG_LDO15,
-	S5M8767_REG_LDO16,
-	S5M8767_REG_LDO17,
-	S5M8767_REG_LDO18,
-	S5M8767_REG_LDO19,
-	S5M8767_REG_LDO20,
-	S5M8767_REG_LDO21,
-	S5M8767_REG_LDO22,
-	S5M8767_REG_LDO23,
-	S5M8767_REG_LDO24,
-	S5M8767_REG_LDO25,
-	S5M8767_REG_LDO26,
-	S5M8767_REG_LDO27,
-	S5M8767_REG_LDO28,
-	S5M8767_REG_UVLO = 0x31,
-	S5M8767_REG_BUCK1CTRL1,
-	S5M8767_REG_BUCK1CTRL2,
-	S5M8767_REG_BUCK2CTRL,
-	S5M8767_REG_BUCK2DVS1,
-	S5M8767_REG_BUCK2DVS2,
-	S5M8767_REG_BUCK2DVS3,
-	S5M8767_REG_BUCK2DVS4,
-	S5M8767_REG_BUCK2DVS5,
-	S5M8767_REG_BUCK2DVS6,
-	S5M8767_REG_BUCK2DVS7,
-	S5M8767_REG_BUCK2DVS8,
-	S5M8767_REG_BUCK3CTRL,
-	S5M8767_REG_BUCK3DVS1,
-	S5M8767_REG_BUCK3DVS2,
-	S5M8767_REG_BUCK3DVS3,
-	S5M8767_REG_BUCK3DVS4,
-	S5M8767_REG_BUCK3DVS5,
-	S5M8767_REG_BUCK3DVS6,
-	S5M8767_REG_BUCK3DVS7,
-	S5M8767_REG_BUCK3DVS8,
-	S5M8767_REG_BUCK4CTRL,
-	S5M8767_REG_BUCK4DVS1,
-	S5M8767_REG_BUCK4DVS2,
-	S5M8767_REG_BUCK4DVS3,
-	S5M8767_REG_BUCK4DVS4,
-	S5M8767_REG_BUCK4DVS5,
-	S5M8767_REG_BUCK4DVS6,
-	S5M8767_REG_BUCK4DVS7,
-	S5M8767_REG_BUCK4DVS8,
-	S5M8767_REG_BUCK5CTRL1,
-	S5M8767_REG_BUCK5CTRL2,
-	S5M8767_REG_BUCK5CTRL3,
-	S5M8767_REG_BUCK5CTRL4,
-	S5M8767_REG_BUCK5CTRL5,
-	S5M8767_REG_BUCK6CTRL1,
-	S5M8767_REG_BUCK6CTRL2,
-	S5M8767_REG_BUCK7CTRL1,
-	S5M8767_REG_BUCK7CTRL2,
-	S5M8767_REG_BUCK8CTRL1,
-	S5M8767_REG_BUCK8CTRL2,
-	S5M8767_REG_BUCK9CTRL1,
-	S5M8767_REG_BUCK9CTRL2,
-	S5M8767_REG_LDO1CTRL,
-	S5M8767_REG_LDO2_1CTRL,
-	S5M8767_REG_LDO2_2CTRL,
-	S5M8767_REG_LDO2_3CTRL,
-	S5M8767_REG_LDO2_4CTRL,
-	S5M8767_REG_LDO3CTRL,
-	S5M8767_REG_LDO4CTRL,
-	S5M8767_REG_LDO5CTRL,
-	S5M8767_REG_LDO6CTRL,
-	S5M8767_REG_LDO7CTRL,
-	S5M8767_REG_LDO8CTRL,
-	S5M8767_REG_LDO9CTRL,
-	S5M8767_REG_LDO10CTRL,
-	S5M8767_REG_LDO11CTRL,
-	S5M8767_REG_LDO12CTRL,
-	S5M8767_REG_LDO13CTRL,
-	S5M8767_REG_LDO14CTRL,
-	S5M8767_REG_LDO15CTRL,
-	S5M8767_REG_LDO16CTRL,
-	S5M8767_REG_LDO17CTRL,
-	S5M8767_REG_LDO18CTRL,
-	S5M8767_REG_LDO19CTRL,
-	S5M8767_REG_LDO20CTRL,
-	S5M8767_REG_LDO21CTRL,
-	S5M8767_REG_LDO22CTRL,
-	S5M8767_REG_LDO23CTRL,
-	S5M8767_REG_LDO24CTRL,
-	S5M8767_REG_LDO25CTRL,
-	S5M8767_REG_LDO26CTRL,
-	S5M8767_REG_LDO27CTRL,
-	S5M8767_REG_LDO28CTRL,
-};
-
-/* S5M8763 registers */
-enum s5m8763_reg {
-	S5M8763_REG_IRQ1,
-	S5M8763_REG_IRQ2,
-	S5M8763_REG_IRQ3,
-	S5M8763_REG_IRQ4,
-	S5M8763_REG_IRQM1,
-	S5M8763_REG_IRQM2,
-	S5M8763_REG_IRQM3,
-	S5M8763_REG_IRQM4,
-	S5M8763_REG_STATUS1,
-	S5M8763_REG_STATUS2,
-	S5M8763_REG_STATUSM1,
-	S5M8763_REG_STATUSM2,
-	S5M8763_REG_CHGR1,
-	S5M8763_REG_CHGR2,
-	S5M8763_REG_LDO_ACTIVE_DISCHARGE1,
-	S5M8763_REG_LDO_ACTIVE_DISCHARGE2,
-	S5M8763_REG_BUCK_ACTIVE_DISCHARGE3,
-	S5M8763_REG_ONOFF1,
-	S5M8763_REG_ONOFF2,
-	S5M8763_REG_ONOFF3,
-	S5M8763_REG_ONOFF4,
-	S5M8763_REG_BUCK1_VOLTAGE1,
-	S5M8763_REG_BUCK1_VOLTAGE2,
-	S5M8763_REG_BUCK1_VOLTAGE3,
-	S5M8763_REG_BUCK1_VOLTAGE4,
-	S5M8763_REG_BUCK2_VOLTAGE1,
-	S5M8763_REG_BUCK2_VOLTAGE2,
-	S5M8763_REG_BUCK3,
-	S5M8763_REG_BUCK4,
-	S5M8763_REG_LDO1_LDO2,
-	S5M8763_REG_LDO3,
-	S5M8763_REG_LDO4,
-	S5M8763_REG_LDO5,
-	S5M8763_REG_LDO6,
-	S5M8763_REG_LDO7,
-	S5M8763_REG_LDO7_LDO8,
-	S5M8763_REG_LDO9_LDO10,
-	S5M8763_REG_LDO11,
-	S5M8763_REG_LDO12,
-	S5M8763_REG_LDO13,
-	S5M8763_REG_LDO14,
-	S5M8763_REG_LDO15,
-	S5M8763_REG_LDO16,
-	S5M8763_REG_BKCHR,
-	S5M8763_REG_LBCNFG1,
-	S5M8763_REG_LBCNFG2,
-};
-
-enum s5m8767_irq {
-	S5M8767_IRQ_PWRR,
-	S5M8767_IRQ_PWRF,
-	S5M8767_IRQ_PWR1S,
-	S5M8767_IRQ_JIGR,
-	S5M8767_IRQ_JIGF,
-	S5M8767_IRQ_LOWBAT2,
-	S5M8767_IRQ_LOWBAT1,
-
-	S5M8767_IRQ_MRB,
-	S5M8767_IRQ_DVSOK2,
-	S5M8767_IRQ_DVSOK3,
-	S5M8767_IRQ_DVSOK4,
-
-	S5M8767_IRQ_RTC60S,
-	S5M8767_IRQ_RTCA1,
-	S5M8767_IRQ_RTCA2,
-	S5M8767_IRQ_SMPL,
-	S5M8767_IRQ_RTC1S,
-	S5M8767_IRQ_WTSR,
-
-	S5M8767_IRQ_NR,
-};
-
-#define S5M8767_IRQ_PWRR_MASK		(1 << 0)
-#define S5M8767_IRQ_PWRF_MASK		(1 << 1)
-#define S5M8767_IRQ_PWR1S_MASK		(1 << 3)
-#define S5M8767_IRQ_JIGR_MASK		(1 << 4)
-#define S5M8767_IRQ_JIGF_MASK		(1 << 5)
-#define S5M8767_IRQ_LOWBAT2_MASK	(1 << 6)
-#define S5M8767_IRQ_LOWBAT1_MASK	(1 << 7)
-
-#define S5M8767_IRQ_MRB_MASK		(1 << 2)
-#define S5M8767_IRQ_DVSOK2_MASK		(1 << 3)
-#define S5M8767_IRQ_DVSOK3_MASK		(1 << 4)
-#define S5M8767_IRQ_DVSOK4_MASK		(1 << 5)
-
-#define S5M8767_IRQ_RTC60S_MASK		(1 << 0)
-#define S5M8767_IRQ_RTCA1_MASK		(1 << 1)
-#define S5M8767_IRQ_RTCA2_MASK		(1 << 2)
-#define S5M8767_IRQ_SMPL_MASK		(1 << 3)
-#define S5M8767_IRQ_RTC1S_MASK		(1 << 4)
-#define S5M8767_IRQ_WTSR_MASK		(1 << 5)
-
-enum s5m8763_irq {
-	S5M8763_IRQ_DCINF,
-	S5M8763_IRQ_DCINR,
-	S5M8763_IRQ_JIGF,
-	S5M8763_IRQ_JIGR,
-	S5M8763_IRQ_PWRONF,
-	S5M8763_IRQ_PWRONR,
-
-	S5M8763_IRQ_WTSREVNT,
-	S5M8763_IRQ_SMPLEVNT,
-	S5M8763_IRQ_ALARM1,
-	S5M8763_IRQ_ALARM0,
-
-	S5M8763_IRQ_ONKEY1S,
-	S5M8763_IRQ_TOPOFFR,
-	S5M8763_IRQ_DCINOVPR,
-	S5M8763_IRQ_CHGRSTF,
-	S5M8763_IRQ_DONER,
-	S5M8763_IRQ_CHGFAULT,
-
-	S5M8763_IRQ_LOBAT1,
-	S5M8763_IRQ_LOBAT2,
-
-	S5M8763_IRQ_NR,
-};
-
-#define S5M8763_IRQ_DCINF_MASK		(1 << 2)
-#define S5M8763_IRQ_DCINR_MASK		(1 << 3)
-#define S5M8763_IRQ_JIGF_MASK		(1 << 4)
-#define S5M8763_IRQ_JIGR_MASK		(1 << 5)
-#define S5M8763_IRQ_PWRONF_MASK		(1 << 6)
-#define S5M8763_IRQ_PWRONR_MASK		(1 << 7)
-
-#define S5M8763_IRQ_WTSREVNT_MASK	(1 << 0)
-#define S5M8763_IRQ_SMPLEVNT_MASK	(1 << 1)
-#define S5M8763_IRQ_ALARM1_MASK		(1 << 2)
-#define S5M8763_IRQ_ALARM0_MASK		(1 << 3)
-
-#define S5M8763_IRQ_ONKEY1S_MASK	(1 << 0)
-#define S5M8763_IRQ_TOPOFFR_MASK	(1 << 2)
-#define S5M8763_IRQ_DCINOVPR_MASK	(1 << 3)
-#define S5M8763_IRQ_CHGRSTF_MASK	(1 << 4)
-#define S5M8763_IRQ_DONER_MASK		(1 << 5)
-#define S5M8763_IRQ_CHGFAULT_MASK	(1 << 7)
-
-#define S5M8763_IRQ_LOBAT1_MASK		(1 << 0)
-#define S5M8763_IRQ_LOBAT2_MASK		(1 << 1)
-
-#define S5M8763_ENRAMP                  (1 << 4)
-
-/**
- * struct s5m87xx_dev - s5m87xx master device for sub-drivers
- * @dev: master device of the chip (can be used to access platform data)
- * @i2c: i2c client private data for regulator
- * @rtc: i2c client private data for rtc
- * @iolock: mutex for serializing io access
- * @irqlock: mutex for buslock
- * @irq_base: base IRQ number for s5m87xx, required for IRQs
- * @irq: generic IRQ number for s5m87xx
- * @ono: power onoff IRQ number for s5m87xx
- * @irq_masks_cur: currently active value
- * @irq_masks_cache: cached hardware value
- * @type: indicate which s5m87xx "variant" is used
- */
-struct s5m87xx_dev {
-	struct device *dev;
-	struct regmap *regmap;
-	struct i2c_client *i2c;
-	struct i2c_client *rtc;
-	struct mutex iolock;
-	struct mutex irqlock;
-
-	int device_type;
-	int irq_base;
-	int irq;
-	int ono;
-	u8 irq_masks_cur[NUM_IRQ_REGS];
-	u8 irq_masks_cache[NUM_IRQ_REGS];
-	int type;
-	bool wakeup;
-};
-
-int s5m_irq_init(struct s5m87xx_dev *s5m87xx);
-void s5m_irq_exit(struct s5m87xx_dev *s5m87xx);
-int s5m_irq_resume(struct s5m87xx_dev *s5m87xx);
-
-extern int s5m_reg_read(struct s5m87xx_dev *s5m87xx, u8 reg, void *dest);
-extern int s5m_bulk_read(struct s5m87xx_dev *s5m87xx, u8 reg, int count, u8 *buf);
-extern int s5m_reg_write(struct s5m87xx_dev *s5m87xx, u8 reg, u8 value);
-extern int s5m_bulk_write(struct s5m87xx_dev *s5m87xx, u8 reg, int count, u8 *buf);
-extern int s5m_reg_update(struct s5m87xx_dev *s5m87xx, u8 reg, u8 val, u8 mask);
-
-struct s5m_platform_data {
-	struct s5m_regulator_data	*regulators;
-	int				device_type;
-	int				num_regulators;
-
-	int				irq_base;
-	int 				(*cfg_pmic_irq)(void);
-
-	int				ono;
-	bool				wakeup;
-	bool				buck_voltage_lock;
-
-	int				buck_gpios[3];
-	int				buck2_voltage[8];
-	bool				buck2_gpiodvs;
-	int				buck3_voltage[8];
-	bool				buck3_gpiodvs;
-	int				buck4_voltage[8];
-	bool				buck4_gpiodvs;
-
-	int				buck_set1;
-	int				buck_set2;
-	int				buck_set3;
-	int				buck2_enable;
-	int				buck3_enable;
-	int				buck4_enable;
-	int				buck_default_idx;
-	int				buck2_default_idx;
-	int				buck3_default_idx;
-	int				buck4_default_idx;
-
-	int                             buck_ramp_delay;
-	bool                            buck2_ramp_enable;
-	bool                            buck3_ramp_enable;
-	bool                            buck4_ramp_enable;
-};
-
-#endif /*  __LINUX_MFD_S5M_CORE_H */
diff --git a/ANDROID_3.4.5/include/linux/mfd/s5m87xx/s5m-pmic.h b/ANDROID_3.4.5/include/linux/mfd/s5m87xx/s5m-pmic.h
deleted file mode 100644
index a72a5d27..00000000
--- a/ANDROID_3.4.5/include/linux/mfd/s5m87xx/s5m-pmic.h
+++ /dev/null
@@ -1,100 +0,0 @@
-/* s5m87xx.h
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __LINUX_MFD_S5M_PMIC_H
-#define __LINUX_MFD_S5M_PMIC_H
-
-#include <linux/regulator/machine.h>
-
-/* S5M8767 regulator ids */
-enum s5m8767_regulators {
-	S5M8767_LDO1,
-	S5M8767_LDO2,
-	S5M8767_LDO3,
-	S5M8767_LDO4,
-	S5M8767_LDO5,
-	S5M8767_LDO6,
-	S5M8767_LDO7,
-	S5M8767_LDO8,
-	S5M8767_LDO9,
-	S5M8767_LDO10,
-	S5M8767_LDO11,
-	S5M8767_LDO12,
-	S5M8767_LDO13,
-	S5M8767_LDO14,
-	S5M8767_LDO15,
-	S5M8767_LDO16,
-	S5M8767_LDO17,
-	S5M8767_LDO18,
-	S5M8767_LDO19,
-	S5M8767_LDO20,
-	S5M8767_LDO21,
-	S5M8767_LDO22,
-	S5M8767_LDO23,
-	S5M8767_LDO24,
-	S5M8767_LDO25,
-	S5M8767_LDO26,
-	S5M8767_LDO27,
-	S5M8767_LDO28,
-	S5M8767_BUCK1,
-	S5M8767_BUCK2,
-	S5M8767_BUCK3,
-	S5M8767_BUCK4,
-	S5M8767_BUCK5,
-	S5M8767_BUCK6,
-	S5M8767_BUCK7,
-	S5M8767_BUCK8,
-	S5M8767_BUCK9,
-	S5M8767_AP_EN32KHZ,
-	S5M8767_CP_EN32KHZ,
-
-	S5M8767_REG_MAX,
-};
-
-/* S5M8763 regulator ids */
-enum s5m8763_regulators {
-	S5M8763_LDO1,
-	S5M8763_LDO2,
-	S5M8763_LDO3,
-	S5M8763_LDO4,
-	S5M8763_LDO5,
-	S5M8763_LDO6,
-	S5M8763_LDO7,
-	S5M8763_LDO8,
-	S5M8763_LDO9,
-	S5M8763_LDO10,
-	S5M8763_LDO11,
-	S5M8763_LDO12,
-	S5M8763_LDO13,
-	S5M8763_LDO14,
-	S5M8763_LDO15,
-	S5M8763_LDO16,
-	S5M8763_BUCK1,
-	S5M8763_BUCK2,
-	S5M8763_BUCK3,
-	S5M8763_BUCK4,
-	S5M8763_AP_EN32KHZ,
-	S5M8763_CP_EN32KHZ,
-	S5M8763_ENCHGVI,
-	S5M8763_ESAFEUSB1,
-	S5M8763_ESAFEUSB2,
-};
-
-/**
- * s5m87xx_regulator_data - regulator data
- * @id: regulator id
- * @initdata: regulator init data (contraints, supplies, ...)
- */
-struct s5m_regulator_data {
-	int				id;
-	struct regulator_init_data	*initdata;
-};
-
-#endif /*  __LINUX_MFD_S5M_PMIC_H */
diff --git a/ANDROID_3.4.5/include/linux/mfd/s5m87xx/s5m-rtc.h b/ANDROID_3.4.5/include/linux/mfd/s5m87xx/s5m-rtc.h
deleted file mode 100644
index 6ce8da26..00000000
--- a/ANDROID_3.4.5/include/linux/mfd/s5m87xx/s5m-rtc.h
+++ /dev/null
@@ -1,84 +0,0 @@
-/*
- * s5m-rtc.h
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd
- *              http://www.samsung.com
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- */
-
-#ifndef __LINUX_MFD_S5M_RTC_H
-#define __LINUX_MFD_S5M_RTC_H
-
-enum s5m87xx_rtc_reg {
-	S5M87XX_RTC_SEC,
-	S5M87XX_RTC_MIN,
-	S5M87XX_RTC_HOUR,
-	S5M87XX_RTC_WEEKDAY,
-	S5M87XX_RTC_DATE,
-	S5M87XX_RTC_MONTH,
-	S5M87XX_RTC_YEAR1,
-	S5M87XX_RTC_YEAR2,
-	S5M87XX_ALARM0_SEC,
-	S5M87XX_ALARM0_MIN,
-	S5M87XX_ALARM0_HOUR,
-	S5M87XX_ALARM0_WEEKDAY,
-	S5M87XX_ALARM0_DATE,
-	S5M87XX_ALARM0_MONTH,
-	S5M87XX_ALARM0_YEAR1,
-	S5M87XX_ALARM0_YEAR2,
-	S5M87XX_ALARM1_SEC,
-	S5M87XX_ALARM1_MIN,
-	S5M87XX_ALARM1_HOUR,
-	S5M87XX_ALARM1_WEEKDAY,
-	S5M87XX_ALARM1_DATE,
-	S5M87XX_ALARM1_MONTH,
-	S5M87XX_ALARM1_YEAR1,
-	S5M87XX_ALARM1_YEAR2,
-	S5M87XX_ALARM0_CONF,
-	S5M87XX_ALARM1_CONF,
-	S5M87XX_RTC_STATUS,
-	S5M87XX_WTSR_SMPL_CNTL,
-	S5M87XX_RTC_UDR_CON,
-};
-
-#define RTC_I2C_ADDR		(0x0C >> 1)
-
-#define HOUR_12			(1 << 7)
-#define HOUR_AMPM		(1 << 6)
-#define HOUR_PM			(1 << 5)
-#define ALARM0_STATUS		(1 << 1)
-#define ALARM1_STATUS		(1 << 2)
-#define UPDATE_AD		(1 << 0)
-
-/* RTC Control Register */
-#define BCD_EN_SHIFT		0
-#define BCD_EN_MASK		(1 << BCD_EN_SHIFT)
-#define MODEL24_SHIFT		1
-#define MODEL24_MASK		(1 << MODEL24_SHIFT)
-/* RTC Update Register1 */
-#define RTC_UDR_SHIFT		0
-#define RTC_UDR_MASK		(1 << RTC_UDR_SHIFT)
-/* RTC Hour register */
-#define HOUR_PM_SHIFT		6
-#define HOUR_PM_MASK		(1 << HOUR_PM_SHIFT)
-/* RTC Alarm Enable */
-#define ALARM_ENABLE_SHIFT	7
-#define ALARM_ENABLE_MASK	(1 << ALARM_ENABLE_SHIFT)
-
-enum {
-	RTC_SEC = 0,
-	RTC_MIN,
-	RTC_HOUR,
-	RTC_WEEKDAY,
-	RTC_DATE,
-	RTC_MONTH,
-	RTC_YEAR1,
-	RTC_YEAR2,
-};
-
-#endif /*  __LINUX_MFD_S5M_RTC_H */
diff --git a/ANDROID_3.4.5/include/linux/mfd/stmpe.h b/ANDROID_3.4.5/include/linux/mfd/stmpe.h
deleted file mode 100644
index 8516fd1e..00000000
--- a/ANDROID_3.4.5/include/linux/mfd/stmpe.h
+++ /dev/null
@@ -1,225 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * License Terms: GNU General Public License, version 2
- * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
- */
-
-#ifndef __LINUX_MFD_STMPE_H
-#define __LINUX_MFD_STMPE_H
-
-#include <linux/mutex.h>
-
-struct device;
-
-enum stmpe_block {
-	STMPE_BLOCK_GPIO	= 1 << 0,
-	STMPE_BLOCK_KEYPAD	= 1 << 1,
-	STMPE_BLOCK_TOUCHSCREEN	= 1 << 2,
-	STMPE_BLOCK_ADC		= 1 << 3,
-	STMPE_BLOCK_PWM		= 1 << 4,
-	STMPE_BLOCK_ROTATOR	= 1 << 5,
-};
-
-enum stmpe_partnum {
-	STMPE610,
-	STMPE801,
-	STMPE811,
-	STMPE1601,
-	STMPE2401,
-	STMPE2403,
-	STMPE_NBR_PARTS
-};
-
-/*
- * For registers whose locations differ on variants,  the correct address is
- * obtained by indexing stmpe->regs with one of the following.
- */
-enum {
-	STMPE_IDX_CHIP_ID,
-	STMPE_IDX_ICR_LSB,
-	STMPE_IDX_IER_LSB,
-	STMPE_IDX_ISR_MSB,
-	STMPE_IDX_GPMR_LSB,
-	STMPE_IDX_GPSR_LSB,
-	STMPE_IDX_GPCR_LSB,
-	STMPE_IDX_GPDR_LSB,
-	STMPE_IDX_GPEDR_MSB,
-	STMPE_IDX_GPRER_LSB,
-	STMPE_IDX_GPFER_LSB,
-	STMPE_IDX_GPAFR_U_MSB,
-	STMPE_IDX_IEGPIOR_LSB,
-	STMPE_IDX_ISGPIOR_MSB,
-	STMPE_IDX_MAX,
-};
-
-
-struct stmpe_variant_info;
-struct stmpe_client_info;
-
-/**
- * struct stmpe - STMPE MFD structure
- * @lock: lock protecting I/O operations
- * @irq_lock: IRQ bus lock
- * @dev: device, mostly for dev_dbg()
- * @client: client - i2c or spi
- * @ci: client specific information
- * @partnum: part number
- * @variant: the detected STMPE model number
- * @regs: list of addresses of registers which are at different addresses on
- *	  different variants.  Indexed by one of STMPE_IDX_*.
- * @irq: irq number for stmpe
- * @irq_base: starting IRQ number for internal IRQs
- * @num_gpios: number of gpios, differs for variants
- * @ier: cache of IER registers for bus_lock
- * @oldier: cache of IER registers for bus_lock
- * @pdata: platform data
- */
-struct stmpe {
-	struct mutex lock;
-	struct mutex irq_lock;
-	struct device *dev;
-	void *client;
-	struct stmpe_client_info *ci;
-	enum stmpe_partnum partnum;
-	struct stmpe_variant_info *variant;
-	const u8 *regs;
-
-	int irq;
-	int irq_base;
-	int num_gpios;
-	u8 ier[2];
-	u8 oldier[2];
-	struct stmpe_platform_data *pdata;
-};
-
-extern int stmpe_reg_write(struct stmpe *stmpe, u8 reg, u8 data);
-extern int stmpe_reg_read(struct stmpe *stmpe, u8 reg);
-extern int stmpe_block_read(struct stmpe *stmpe, u8 reg, u8 length,
-			    u8 *values);
-extern int stmpe_block_write(struct stmpe *stmpe, u8 reg, u8 length,
-			     const u8 *values);
-extern int stmpe_set_bits(struct stmpe *stmpe, u8 reg, u8 mask, u8 val);
-extern int stmpe_set_altfunc(struct stmpe *stmpe, u32 pins,
-			     enum stmpe_block block);
-extern int stmpe_enable(struct stmpe *stmpe, unsigned int blocks);
-extern int stmpe_disable(struct stmpe *stmpe, unsigned int blocks);
-
-struct matrix_keymap_data;
-
-/**
- * struct stmpe_keypad_platform_data - STMPE keypad platform data
- * @keymap_data: key map table and size
- * @debounce_ms: debounce interval, in ms.  Maximum is
- *		 %STMPE_KEYPAD_MAX_DEBOUNCE.
- * @scan_count: number of key scanning cycles to confirm key data.
- *		Maximum is %STMPE_KEYPAD_MAX_SCAN_COUNT.
- * @no_autorepeat: disable key autorepeat
- */
-struct stmpe_keypad_platform_data {
-	struct matrix_keymap_data *keymap_data;
-	unsigned int debounce_ms;
-	unsigned int scan_count;
-	bool no_autorepeat;
-};
-
-#define STMPE_GPIO_NOREQ_811_TOUCH	(0xf0)
-
-/**
- * struct stmpe_gpio_platform_data - STMPE GPIO platform data
- * @gpio_base: first gpio number assigned.  A maximum of
- *	       %STMPE_NR_GPIOS GPIOs will be allocated.
- * @norequest_mask: bitmask specifying which GPIOs should _not_ be
- *		    requestable due to different usage (e.g. touch, keypad)
- *		    STMPE_GPIO_NOREQ_* macros can be used here.
- * @setup: board specific setup callback.
- * @remove: board specific remove callback
- */
-struct stmpe_gpio_platform_data {
-	int gpio_base;
-	unsigned norequest_mask;
-	void (*setup)(struct stmpe *stmpe, unsigned gpio_base);
-	void (*remove)(struct stmpe *stmpe, unsigned gpio_base);
-};
-
-/**
- * struct stmpe_ts_platform_data - stmpe811 touch screen controller platform
- * data
- * @sample_time: ADC converstion time in number of clock.
- * (0 -> 36 clocks, 1 -> 44 clocks, 2 -> 56 clocks, 3 -> 64 clocks,
- * 4 -> 80 clocks, 5 -> 96 clocks, 6 -> 144 clocks),
- * recommended is 4.
- * @mod_12b: ADC Bit mode (0 -> 10bit ADC, 1 -> 12bit ADC)
- * @ref_sel: ADC reference source
- * (0 -> internal reference, 1 -> external reference)
- * @adc_freq: ADC Clock speed
- * (0 -> 1.625 MHz, 1 -> 3.25 MHz, 2 || 3 -> 6.5 MHz)
- * @ave_ctrl: Sample average control
- * (0 -> 1 sample, 1 -> 2 samples, 2 -> 4 samples, 3 -> 8 samples)
- * @touch_det_delay: Touch detect interrupt delay
- * (0 -> 10 us, 1 -> 50 us, 2 -> 100 us, 3 -> 500 us,
- * 4-> 1 ms, 5 -> 5 ms, 6 -> 10 ms, 7 -> 50 ms)
- * recommended is 3
- * @settling: Panel driver settling time
- * (0 -> 10 us, 1 -> 100 us, 2 -> 500 us, 3 -> 1 ms,
- * 4 -> 5 ms, 5 -> 10 ms, 6 for 50 ms, 7 -> 100 ms)
- * recommended is 2
- * @fraction_z: Length of the fractional part in z
- * (fraction_z ([0..7]) = Count of the fractional part)
- * recommended is 7
- * @i_drive: current limit value of the touchscreen drivers
- * (0 -> 20 mA typical 35 mA max, 1 -> 50 mA typical 80 mA max)
- *
- * */
-struct stmpe_ts_platform_data {
-       u8 sample_time;
-       u8 mod_12b;
-       u8 ref_sel;
-       u8 adc_freq;
-       u8 ave_ctrl;
-       u8 touch_det_delay;
-       u8 settling;
-       u8 fraction_z;
-       u8 i_drive;
-};
-
-/**
- * struct stmpe_platform_data - STMPE platform data
- * @id: device id to distinguish between multiple STMPEs on the same board
- * @blocks: bitmask of blocks to enable (use STMPE_BLOCK_*)
- * @irq_trigger: IRQ trigger to use for the interrupt to the host
- * @irq_invert_polarity: IRQ line is connected with reversed polarity
- * @autosleep: bool to enable/disable stmpe autosleep
- * @autosleep_timeout: inactivity timeout in milliseconds for autosleep
- * @irq_base: base IRQ number.  %STMPE_NR_IRQS irqs will be used, or
- *	      %STMPE_NR_INTERNAL_IRQS if the GPIO driver is not used.
- * @irq_over_gpio: true if gpio is used to get irq
- * @irq_gpio: gpio number over which irq will be requested (significant only if
- *	      irq_over_gpio is true)
- * @gpio: GPIO-specific platform data
- * @keypad: keypad-specific platform data
- * @ts: touchscreen-specific platform data
- */
-struct stmpe_platform_data {
-	int id;
-	unsigned int blocks;
-	int irq_base;
-	unsigned int irq_trigger;
-	bool irq_invert_polarity;
-	bool autosleep;
-	bool irq_over_gpio;
-	int irq_gpio;
-	int autosleep_timeout;
-
-	struct stmpe_gpio_platform_data *gpio;
-	struct stmpe_keypad_platform_data *keypad;
-	struct stmpe_ts_platform_data *ts;
-};
-
-#define STMPE_NR_INTERNAL_IRQS	9
-#define STMPE_INT_GPIO(x)	(STMPE_NR_INTERNAL_IRQS + (x))
-
-#define STMPE_NR_GPIOS		24
-#define STMPE_NR_IRQS		STMPE_INT_GPIO(STMPE_NR_GPIOS)
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/mfd/t7l66xb.h b/ANDROID_3.4.5/include/linux/mfd/t7l66xb.h
deleted file mode 100644
index b4629818..00000000
--- a/ANDROID_3.4.5/include/linux/mfd/t7l66xb.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * This file contains the definitions for the T7L66XB
- *
- * (C) Copyright 2005 Ian Molton <spyro@f2s.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-#ifndef MFD_T7L66XB_H
-#define MFD_T7L66XB_H
-
-#include <linux/mfd/core.h>
-#include <linux/mfd/tmio.h>
-
-struct t7l66xb_platform_data {
-	int (*enable)(struct platform_device *dev);
-	int (*disable)(struct platform_device *dev);
-	int (*suspend)(struct platform_device *dev);
-	int (*resume)(struct platform_device *dev);
-
-	int irq_base; /* The base for subdevice irqs */
-
-	struct tmio_nand_data *nand_data;
-};
-
-
-#define IRQ_T7L66XB_MMC        (1)
-#define IRQ_T7L66XB_NAND       (3)
-
-#define T7L66XB_NR_IRQS	8
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/mfd/tc3589x.h b/ANDROID_3.4.5/include/linux/mfd/tc3589x.h
deleted file mode 100644
index 3acb3a8e..00000000
--- a/ANDROID_3.4.5/include/linux/mfd/tc3589x.h
+++ /dev/null
@@ -1,195 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * License Terms: GNU General Public License, version 2
- */
-
-#ifndef __LINUX_MFD_TC3589x_H
-#define __LINUX_MFD_TC3589x_H
-
-struct device;
-
-enum tx3589x_block {
-	TC3589x_BLOCK_GPIO        = 1 << 0,
-	TC3589x_BLOCK_KEYPAD      = 1 << 1,
-};
-
-#define TC3589x_RSTCTRL_IRQRST	(1 << 4)
-#define TC3589x_RSTCTRL_TIMRST	(1 << 3)
-#define TC3589x_RSTCTRL_ROTRST	(1 << 2)
-#define TC3589x_RSTCTRL_KBDRST	(1 << 1)
-#define TC3589x_RSTCTRL_GPIRST	(1 << 0)
-
-/* Keyboard Configuration Registers */
-#define TC3589x_KBDSETTLE_REG   0x01
-#define TC3589x_KBDBOUNCE       0x02
-#define TC3589x_KBDSIZE         0x03
-#define TC3589x_KBCFG_LSB       0x04
-#define TC3589x_KBCFG_MSB       0x05
-#define TC3589x_KBDIC           0x08
-#define TC3589x_KBDMSK          0x09
-#define TC3589x_EVTCODE_FIFO    0x10
-#define TC3589x_KBDMFS		0x8F
-
-#define TC3589x_IRQST		0x91
-
-#define TC3589x_MANFCODE_MAGIC	0x03
-#define TC3589x_MANFCODE	0x80
-#define TC3589x_VERSION		0x81
-#define TC3589x_IOCFG		0xA7
-
-#define TC3589x_CLKMODE		0x88
-#define TC3589x_CLKCFG		0x89
-#define TC3589x_CLKEN		0x8A
-
-#define TC3589x_RSTCTRL		0x82
-#define TC3589x_EXTRSTN		0x83
-#define TC3589x_RSTINTCLR	0x84
-
-/* Pull up/down configuration registers */
-#define TC3589x_IOCFG           0xA7
-#define TC3589x_IOPULLCFG0_LSB  0xAA
-#define TC3589x_IOPULLCFG0_MSB  0xAB
-#define TC3589x_IOPULLCFG1_LSB  0xAC
-#define TC3589x_IOPULLCFG1_MSB  0xAD
-#define TC3589x_IOPULLCFG2_LSB  0xAE
-
-#define TC3589x_GPIOIS0		0xC9
-#define TC3589x_GPIOIS1		0xCA
-#define TC3589x_GPIOIS2		0xCB
-#define TC3589x_GPIOIBE0	0xCC
-#define TC3589x_GPIOIBE1	0xCD
-#define TC3589x_GPIOIBE2	0xCE
-#define TC3589x_GPIOIEV0	0xCF
-#define TC3589x_GPIOIEV1	0xD0
-#define TC3589x_GPIOIEV2	0xD1
-#define TC3589x_GPIOIE0		0xD2
-#define TC3589x_GPIOIE1		0xD3
-#define TC3589x_GPIOIE2		0xD4
-#define TC3589x_GPIORIS0	0xD6
-#define TC3589x_GPIORIS1	0xD7
-#define TC3589x_GPIORIS2	0xD8
-#define TC3589x_GPIOMIS0	0xD9
-#define TC3589x_GPIOMIS1	0xDA
-#define TC3589x_GPIOMIS2	0xDB
-#define TC3589x_GPIOIC0		0xDC
-#define TC3589x_GPIOIC1		0xDD
-#define TC3589x_GPIOIC2		0xDE
-
-#define TC3589x_GPIODATA0	0xC0
-#define TC3589x_GPIOMASK0	0xc1
-#define TC3589x_GPIODATA1	0xC2
-#define TC3589x_GPIOMASK1	0xc3
-#define TC3589x_GPIODATA2	0xC4
-#define TC3589x_GPIOMASK2	0xC5
-
-#define TC3589x_GPIODIR0	0xC6
-#define TC3589x_GPIODIR1	0xC7
-#define TC3589x_GPIODIR2	0xC8
-
-#define TC3589x_GPIOSYNC0	0xE6
-#define TC3589x_GPIOSYNC1	0xE7
-#define TC3589x_GPIOSYNC2	0xE8
-
-#define TC3589x_GPIOWAKE0	0xE9
-#define TC3589x_GPIOWAKE1	0xEA
-#define TC3589x_GPIOWAKE2	0xEB
-
-#define TC3589x_GPIOODM0	0xE0
-#define TC3589x_GPIOODE0	0xE1
-#define TC3589x_GPIOODM1	0xE2
-#define TC3589x_GPIOODE1	0xE3
-#define TC3589x_GPIOODM2	0xE4
-#define TC3589x_GPIOODE2	0xE5
-
-#define TC3589x_INT_GPIIRQ	0
-#define TC3589x_INT_TI0IRQ	1
-#define TC3589x_INT_TI1IRQ	2
-#define TC3589x_INT_TI2IRQ	3
-#define TC3589x_INT_ROTIRQ	5
-#define TC3589x_INT_KBDIRQ	6
-#define TC3589x_INT_PORIRQ	7
-
-#define TC3589x_NR_INTERNAL_IRQS	8
-#define TC3589x_INT_GPIO(x)	(TC3589x_NR_INTERNAL_IRQS + (x))
-
-struct tc3589x {
-	struct mutex lock;
-	struct device *dev;
-	struct i2c_client *i2c;
-
-	int irq_base;
-	int num_gpio;
-	struct tc3589x_platform_data *pdata;
-};
-
-extern int tc3589x_reg_write(struct tc3589x *tc3589x, u8 reg, u8 data);
-extern int tc3589x_reg_read(struct tc3589x *tc3589x, u8 reg);
-extern int tc3589x_block_read(struct tc3589x *tc3589x, u8 reg, u8 length,
-			      u8 *values);
-extern int tc3589x_block_write(struct tc3589x *tc3589x, u8 reg, u8 length,
-			       const u8 *values);
-extern int tc3589x_set_bits(struct tc3589x *tc3589x, u8 reg, u8 mask, u8 val);
-
-/*
- * Keypad related platform specific constants
- * These values may be modified for fine tuning
- */
-#define TC_KPD_ROWS             0x8
-#define TC_KPD_COLUMNS          0x8
-#define TC_KPD_DEBOUNCE_PERIOD  0xA3
-#define TC_KPD_SETTLE_TIME      0xA3
-
-/**
- * struct tc35893_platform_data - data structure for platform specific data
- * @keymap_data:        matrix scan code table for keycodes
- * @krow:               mask for available rows, value is 0xFF
- * @kcol:               mask for available columns, value is 0xFF
- * @debounce_period:    platform specific debounce time
- * @settle_time:        platform specific settle down time
- * @irqtype:            type of interrupt, falling or rising edge
- * @enable_wakeup:      specifies if keypad event can wake up system from sleep
- * @no_autorepeat:      flag for auto repetition
- */
-struct tc3589x_keypad_platform_data {
-	const struct matrix_keymap_data *keymap_data;
-	u8                      krow;
-	u8                      kcol;
-	u8                      debounce_period;
-	u8                      settle_time;
-	unsigned long           irqtype;
-	bool                    enable_wakeup;
-	bool                    no_autorepeat;
-};
-
-/**
- * struct tc3589x_gpio_platform_data - TC3589x GPIO platform data
- * @gpio_base: first gpio number assigned to TC3589x.  A maximum of
- *	       %TC3589x_NR_GPIOS GPIOs will be allocated.
- * @setup: callback for board-specific initialization
- * @remove: callback for board-specific teardown
- */
-struct tc3589x_gpio_platform_data {
-	int gpio_base;
-	void (*setup)(struct tc3589x *tc3589x, unsigned gpio_base);
-	void (*remove)(struct tc3589x *tc3589x, unsigned gpio_base);
-};
-
-/**
- * struct tc3589x_platform_data - TC3589x platform data
- * @block: bitmask of blocks to enable (use TC3589x_BLOCK_*)
- * @irq_base: base IRQ number.  %TC3589x_NR_IRQS irqs will be used.
- * @gpio: GPIO-specific platform data
- * @keypad: keypad-specific platform data
- */
-struct tc3589x_platform_data {
-	unsigned int block;
-	int irq_base;
-	struct tc3589x_gpio_platform_data *gpio;
-	const struct tc3589x_keypad_platform_data *keypad;
-};
-
-#define TC3589x_NR_GPIOS	24
-#define TC3589x_NR_IRQS		TC3589x_INT_GPIO(TC3589x_NR_GPIOS)
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/mfd/tc6387xb.h b/ANDROID_3.4.5/include/linux/mfd/tc6387xb.h
deleted file mode 100644
index b4888209..00000000
--- a/ANDROID_3.4.5/include/linux/mfd/tc6387xb.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * This file contains the definitions for the TC6387XB
- *
- * (C) Copyright 2005 Ian Molton <spyro@f2s.com>
- *
- * May be copied or modified under the terms of the GNU General Public
- * License.  See linux/COPYING for more information.
- *
- */
-#ifndef MFD_TC6387XB_H
-#define MFD_TC6387XB_H
-
-struct tc6387xb_platform_data {
-	int (*enable)(struct platform_device *dev);
-	int (*disable)(struct platform_device *dev);
-	int (*suspend)(struct platform_device *dev);
-	int (*resume)(struct platform_device *dev);
-};
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/mfd/tc6393xb.h b/ANDROID_3.4.5/include/linux/mfd/tc6393xb.h
deleted file mode 100644
index 626e4482..00000000
--- a/ANDROID_3.4.5/include/linux/mfd/tc6393xb.h
+++ /dev/null
@@ -1,59 +0,0 @@
-/*
- * Toshiba TC6393XB SoC support
- *
- * Copyright(c) 2005-2006 Chris Humbert
- * Copyright(c) 2005 Dirk Opfer
- * Copyright(c) 2005 Ian Molton <spyro@f2s.com>
- * Copyright(c) 2007 Dmitry Baryshkov
- *
- * Based on code written by Sharp/Lineo for 2.4 kernels
- * Based on locomo.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef MFD_TC6393XB_H
-#define MFD_TC6393XB_H
-
-#include <linux/fb.h>
-
-/* Also one should provide the CK3P6MI clock */
-struct tc6393xb_platform_data {
-	u16	scr_pll2cr;	/* PLL2 Control */
-	u16	scr_gper;	/* GP Enable */
-
-	int	(*enable)(struct platform_device *dev);
-	int	(*disable)(struct platform_device *dev);
-	int	(*suspend)(struct platform_device *dev);
-	int	(*resume)(struct platform_device *dev);
-
-	int	irq_base;	/* base for subdevice irqs */
-	int	gpio_base;
-	int	(*setup)(struct platform_device *dev);
-	void	(*teardown)(struct platform_device *dev);
-
-	struct tmio_nand_data	*nand_data;
-	struct tmio_fb_data	*fb_data;
-
-	unsigned resume_restore : 1; /* make special actions
-					to preserve the state
-					on suspend/resume */
-};
-
-extern int tc6393xb_lcd_mode(struct platform_device *fb,
-			     const struct fb_videomode *mode);
-extern int tc6393xb_lcd_set_power(struct platform_device *fb, bool on);
-
-/*
- * Relative to irq_base
- */
-#define	IRQ_TC6393_NAND		0
-#define	IRQ_TC6393_MMC		1
-#define	IRQ_TC6393_OHCI		2
-#define	IRQ_TC6393_FB		4
-
-#define	TC6393XB_NR_IRQS	8
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/mfd/ti_ssp.h b/ANDROID_3.4.5/include/linux/mfd/ti_ssp.h
deleted file mode 100644
index dbb4b43b..00000000
--- a/ANDROID_3.4.5/include/linux/mfd/ti_ssp.h
+++ /dev/null
@@ -1,93 +0,0 @@
-/*
- * Sequencer Serial Port (SSP) driver for Texas Instruments' SoCs
- *
- * Copyright (C) 2010 Texas Instruments Inc
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __TI_SSP_H__
-#define __TI_SSP_H__
-
-struct ti_ssp_dev_data {
-	const char	*dev_name;
-	void		*pdata;
-	size_t		pdata_size;
-};
-
-struct ti_ssp_data {
-	unsigned long		out_clock;
-	struct ti_ssp_dev_data	dev_data[2];
-};
-
-struct ti_ssp_spi_data {
-	unsigned long	iosel;
-	int		num_cs;
-	void		(*select)(int cs);
-};
-
-/*
- * Sequencer port IO pin configuration bits.  These do not correlate 1-1 with
- * the hardware.  The iosel field in the port data combines iosel1 and iosel2,
- * and is therefore not a direct map to register space.  It is best to use the
- * macros below to construct iosel values.
- *
- * least significant 16 bits --> iosel1
- * most significant 16 bits  --> iosel2
- */
-
-#define SSP_IN			0x0000
-#define SSP_DATA		0x0001
-#define SSP_CLOCK		0x0002
-#define SSP_CHIPSEL		0x0003
-#define SSP_OUT			0x0004
-#define SSP_PIN_SEL(pin, v)	((v) << ((pin) * 3))
-#define SSP_PIN_MASK(pin)	SSP_PIN_SEL(pin, 0x7)
-#define SSP_INPUT_SEL(pin)	((pin) << 16)
-
-/* Sequencer port config bits */
-#define SSP_EARLY_DIN		BIT(8)
-#define SSP_DELAY_DOUT		BIT(9)
-
-/* Sequence map definitions */
-#define SSP_CLK_HIGH		BIT(0)
-#define SSP_CLK_LOW		0
-#define SSP_DATA_HIGH		BIT(1)
-#define SSP_DATA_LOW		0
-#define SSP_CS_HIGH		BIT(2)
-#define SSP_CS_LOW		0
-#define SSP_OUT_MODE		BIT(3)
-#define SSP_IN_MODE		0
-#define SSP_DATA_REG		BIT(4)
-#define SSP_ADDR_REG		0
-
-#define SSP_OPCODE_DIRECT	((0x0) << 5)
-#define SSP_OPCODE_TOGGLE	((0x1) << 5)
-#define SSP_OPCODE_SHIFT	((0x2) << 5)
-#define SSP_OPCODE_BRANCH0	((0x4) << 5)
-#define SSP_OPCODE_BRANCH1	((0x5) << 5)
-#define SSP_OPCODE_BRANCH	((0x6) << 5)
-#define SSP_OPCODE_STOP		((0x7) << 5)
-#define SSP_BRANCH(addr)	((addr) << 8)
-#define SSP_COUNT(cycles)	((cycles) << 8)
-
-int ti_ssp_raw_read(struct device *dev);
-int ti_ssp_raw_write(struct device *dev, u32 val);
-int ti_ssp_load(struct device *dev, int offs, u32* prog, int len);
-int ti_ssp_run(struct device *dev, u32 pc, u32 input, u32 *output);
-int ti_ssp_set_mode(struct device *dev, int mode);
-int ti_ssp_set_iosel(struct device *dev, u32 iosel);
-
-#endif /* __TI_SSP_H__ */
diff --git a/ANDROID_3.4.5/include/linux/mfd/tmio.h b/ANDROID_3.4.5/include/linux/mfd/tmio.h
deleted file mode 100644
index f5171dbf..00000000
--- a/ANDROID_3.4.5/include/linux/mfd/tmio.h
+++ /dev/null
@@ -1,153 +0,0 @@
-#ifndef MFD_TMIO_H
-#define MFD_TMIO_H
-
-#include <linux/device.h>
-#include <linux/fb.h>
-#include <linux/io.h>
-#include <linux/jiffies.h>
-#include <linux/platform_device.h>
-#include <linux/pm_runtime.h>
-
-#define tmio_ioread8(addr) readb(addr)
-#define tmio_ioread16(addr) readw(addr)
-#define tmio_ioread16_rep(r, b, l) readsw(r, b, l)
-#define tmio_ioread32(addr) \
-	(((u32) readw((addr))) | (((u32) readw((addr) + 2)) << 16))
-
-#define tmio_iowrite8(val, addr) writeb((val), (addr))
-#define tmio_iowrite16(val, addr) writew((val), (addr))
-#define tmio_iowrite16_rep(r, b, l) writesw(r, b, l)
-#define tmio_iowrite32(val, addr) \
-	do { \
-	writew((val),       (addr)); \
-	writew((val) >> 16, (addr) + 2); \
-	} while (0)
-
-#define CNF_CMD     0x04
-#define CNF_CTL_BASE   0x10
-#define CNF_INT_PIN  0x3d
-#define CNF_STOP_CLK_CTL 0x40
-#define CNF_GCLK_CTL 0x41
-#define CNF_SD_CLK_MODE 0x42
-#define CNF_PIN_STATUS 0x44
-#define CNF_PWR_CTL_1 0x48
-#define CNF_PWR_CTL_2 0x49
-#define CNF_PWR_CTL_3 0x4a
-#define CNF_CARD_DETECT_MODE 0x4c
-#define CNF_SD_SLOT 0x50
-#define CNF_EXT_GCLK_CTL_1 0xf0
-#define CNF_EXT_GCLK_CTL_2 0xf1
-#define CNF_EXT_GCLK_CTL_3 0xf9
-#define CNF_SD_LED_EN_1 0xfa
-#define CNF_SD_LED_EN_2 0xfe
-
-#define   SDCREN 0x2   /* Enable access to MMC CTL regs. (flag in COMMAND_REG)*/
-
-#define sd_config_write8(base, shift, reg, val) \
-	tmio_iowrite8((val), (base) + ((reg) << (shift)))
-#define sd_config_write16(base, shift, reg, val) \
-	tmio_iowrite16((val), (base) + ((reg) << (shift)))
-#define sd_config_write32(base, shift, reg, val) \
-	do { \
-		tmio_iowrite16((val), (base) + ((reg) << (shift)));   \
-		tmio_iowrite16((val) >> 16, (base) + ((reg + 2) << (shift))); \
-	} while (0)
-
-/* tmio MMC platform flags */
-#define TMIO_MMC_WRPROTECT_DISABLE	(1 << 0)
-/*
- * Some controllers can support a 2-byte block size when the bus width
- * is configured in 4-bit mode.
- */
-#define TMIO_MMC_BLKSZ_2BYTES		(1 << 1)
-/*
- * Some controllers can support SDIO IRQ signalling.
- */
-#define TMIO_MMC_SDIO_IRQ		(1 << 2)
-/*
- * Some platforms can detect card insertion events with controller powered
- * down, using a GPIO IRQ, in which case they have to fill in cd_irq, cd_gpio,
- * and cd_flags fields of struct tmio_mmc_data.
- */
-#define TMIO_MMC_HAS_COLD_CD		(1 << 3)
-/*
- * Some controllers require waiting for the SD bus to become
- * idle before writing to some registers.
- */
-#define TMIO_MMC_HAS_IDLE_WAIT		(1 << 4)
-/*
- * A GPIO is used for card hotplug detection. We need an extra flag for this,
- * because 0 is a valid GPIO number too, and requiring users to specify
- * cd_gpio < 0 to disable GPIO hotplug would break backwards compatibility.
- */
-#define TMIO_MMC_USE_GPIO_CD		(1 << 5)
-
-int tmio_core_mmc_enable(void __iomem *cnf, int shift, unsigned long base);
-int tmio_core_mmc_resume(void __iomem *cnf, int shift, unsigned long base);
-void tmio_core_mmc_pwr(void __iomem *cnf, int shift, int state);
-void tmio_core_mmc_clk_div(void __iomem *cnf, int shift, int state);
-
-struct tmio_mmc_dma {
-	void *chan_priv_tx;
-	void *chan_priv_rx;
-	int alignment_shift;
-};
-
-struct tmio_mmc_host;
-
-/*
- * data for the MMC controller
- */
-struct tmio_mmc_data {
-	unsigned int			hclk;
-	unsigned long			capabilities;
-	unsigned long			flags;
-	u32				ocr_mask;	/* available voltages */
-	struct tmio_mmc_dma		*dma;
-	struct device			*dev;
-	unsigned int			cd_gpio;
-	void (*set_pwr)(struct platform_device *host, int state);
-	void (*set_clk_div)(struct platform_device *host, int state);
-	int (*get_cd)(struct platform_device *host);
-	int (*write16_hook)(struct tmio_mmc_host *host, int addr);
-};
-
-/*
- * This function is deprecated and will be removed soon. Please, convert your
- * platform to use drivers/mmc/core/cd-gpio.c
- */
-#include <linux/mmc/host.h>
-static inline void tmio_mmc_cd_wakeup(struct tmio_mmc_data *pdata)
-{
-	if (pdata)
-		mmc_detect_change(dev_get_drvdata(pdata->dev),
-				  msecs_to_jiffies(100));
-}
-
-/*
- * data for the NAND controller
- */
-struct tmio_nand_data {
-	struct nand_bbt_descr	*badblock_pattern;
-	struct mtd_partition	*partition;
-	unsigned int		num_partitions;
-};
-
-#define FBIO_TMIO_ACC_WRITE	0x7C639300
-#define FBIO_TMIO_ACC_SYNC	0x7C639301
-
-struct tmio_fb_data {
-	int			(*lcd_set_power)(struct platform_device *fb_dev,
-								bool on);
-	int			(*lcd_mode)(struct platform_device *fb_dev,
-					const struct fb_videomode *mode);
-	int			num_modes;
-	struct fb_videomode	*modes;
-
-	/* in mm: size of screen */
-	int			height;
-	int			width;
-};
-
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/mfd/tps6105x.h b/ANDROID_3.4.5/include/linux/mfd/tps6105x.h
deleted file mode 100644
index 386743dd..00000000
--- a/ANDROID_3.4.5/include/linux/mfd/tps6105x.h
+++ /dev/null
@@ -1,101 +0,0 @@
-/*
- * Copyright (C) 2011 ST-Ericsson SA
- * Written on behalf of Linaro for ST-Ericsson
- *
- * Author: Linus Walleij <linus.walleij@linaro.org>
- *
- * License terms: GNU General Public License (GPL) version 2
- */
-#ifndef MFD_TPS6105X_H
-#define MFD_TPS6105X_H
-
-#include <linux/i2c.h>
-#include <linux/regulator/machine.h>
-
-/*
- * Register definitions to all subdrivers
- */
-#define TPS6105X_REG_0			0x00
-#define TPS6105X_REG0_MODE_SHIFT	6
-#define TPS6105X_REG0_MODE_MASK		(0x03<<6)
-/* These defines for both reg0 and reg1 */
-#define TPS6105X_REG0_MODE_SHUTDOWN	0x00
-#define TPS6105X_REG0_MODE_TORCH	0x01
-#define TPS6105X_REG0_MODE_TORCH_FLASH	0x02
-#define TPS6105X_REG0_MODE_VOLTAGE	0x03
-#define TPS6105X_REG0_VOLTAGE_SHIFT	4
-#define TPS6105X_REG0_VOLTAGE_MASK	(3<<4)
-#define TPS6105X_REG0_VOLTAGE_450	0
-#define TPS6105X_REG0_VOLTAGE_500	1
-#define TPS6105X_REG0_VOLTAGE_525	2
-#define TPS6105X_REG0_VOLTAGE_500_2	3
-#define TPS6105X_REG0_DIMMING_SHIFT	3
-#define TPS6105X_REG0_TORCHC_SHIFT	0
-#define TPS6105X_REG0_TORCHC_MASK	(7<<0)
-#define TPS6105X_REG0_TORCHC_0		0x00
-#define TPS6105X_REG0_TORCHC_50		0x01
-#define TPS6105X_REG0_TORCHC_75		0x02
-#define TPS6105X_REG0_TORCHC_100	0x03
-#define TPS6105X_REG0_TORCHC_150	0x04
-#define TPS6105X_REG0_TORCHC_200	0x05
-#define TPS6105X_REG0_TORCHC_250_400	0x06
-#define TPS6105X_REG0_TORCHC_250_500	0x07
-#define TPS6105X_REG_1			0x01
-#define TPS6105X_REG1_MODE_SHIFT	6
-#define TPS6105X_REG1_MODE_MASK		(0x03<<6)
-#define TPS6105X_REG1_MODE_SHUTDOWN	0x00
-#define TPS6105X_REG1_MODE_TORCH	0x01
-#define TPS6105X_REG1_MODE_TORCH_FLASH	0x02
-#define TPS6105X_REG1_MODE_VOLTAGE	0x03
-#define TPS6105X_REG_2			0x02
-#define TPS6105X_REG_3			0x03
-
-/**
- * enum tps6105x_mode - desired mode for the TPS6105x
- * @TPS6105X_MODE_SHUTDOWN: this instance is inactive, not used for anything
- * @TPS61905X_MODE_TORCH: this instance is used as a LED, usually a while
- *	LED, for example as backlight or flashlight. If this is set, the
- *	TPS6105X will register to the LED framework
- * @TPS6105X_MODE_TORCH_FLASH: this instance is used as a flashgun, usually
- *	in a camera
- * @TPS6105X_MODE_VOLTAGE: this instance is used as a voltage regulator and
- *	will register to the regulator framework
- */
-enum tps6105x_mode {
-	TPS6105X_MODE_SHUTDOWN,
-	TPS6105X_MODE_TORCH,
-	TPS6105X_MODE_TORCH_FLASH,
-	TPS6105X_MODE_VOLTAGE,
-};
-
-/**
- * struct tps6105x_platform_data - TPS61905x platform data
- * @mode: what mode this instance shall be operated in,
- *	this is not selectable at runtime
- * @regulator_data: initialization data for the voltage
- *	regulator if used as a voltage source
- */
-struct tps6105x_platform_data {
-	enum tps6105x_mode mode;
-	struct regulator_init_data *regulator_data;
-};
-
-/**
- * struct tps6105x - state holder for the TPS6105x drivers
- * @mutex: mutex to serialize I2C accesses
- * @i2c_client: corresponding I2C client
- * @regulator: regulator device if used in voltage mode
- */
-struct tps6105x {
-	struct tps6105x_platform_data *pdata;
-	struct mutex		lock;
-	struct i2c_client	*client;
-	struct regulator_dev	*regulator;
-};
-
-extern int tps6105x_set(struct tps6105x *tps6105x, u8 reg, u8 value);
-extern int tps6105x_get(struct tps6105x *tps6105x, u8 reg, u8 *buf);
-extern int tps6105x_mask_and_set(struct tps6105x *tps6105x, u8 reg,
-				 u8 bitmask, u8 bitvalues);
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/mfd/tps6507x.h b/ANDROID_3.4.5/include/linux/mfd/tps6507x.h
deleted file mode 100644
index c923e486..00000000
--- a/ANDROID_3.4.5/include/linux/mfd/tps6507x.h
+++ /dev/null
@@ -1,169 +0,0 @@
-/* linux/mfd/tps6507x.h
- *
- * Functions to access TPS65070 power management chip.
- *
- * Copyright (c) 2009 RidgeRun (todd.fischer@ridgerun.com)
- *
- *
- *  For licencing details see kernel-base/COPYING
- */
-
-#ifndef __LINUX_MFD_TPS6507X_H
-#define __LINUX_MFD_TPS6507X_H
-
-/*
- * ----------------------------------------------------------------------------
- * Registers, all 8 bits
- * ----------------------------------------------------------------------------
- */
-
-
-/* Register definitions */
-#define	TPS6507X_REG_PPATH1			0X01
-#define	TPS6507X_CHG_USB			BIT(7)
-#define	TPS6507X_CHG_AC				BIT(6)
-#define	TPS6507X_CHG_USB_PW_ENABLE		BIT(5)
-#define	TPS6507X_CHG_AC_PW_ENABLE		BIT(4)
-#define	TPS6507X_CHG_AC_CURRENT			BIT(2)
-#define	TPS6507X_CHG_USB_CURRENT		BIT(0)
-
-#define	TPS6507X_REG_INT			0X02
-#define	TPS6507X_REG_MASK_AC_USB		BIT(7)
-#define	TPS6507X_REG_MASK_TSC			BIT(6)
-#define	TPS6507X_REG_MASK_PB_IN			BIT(5)
-#define	TPS6507X_REG_TSC_INT			BIT(3)
-#define	TPS6507X_REG_PB_IN_INT			BIT(2)
-#define	TPS6507X_REG_AC_USB_APPLIED		BIT(1)
-#define	TPS6507X_REG_AC_USB_REMOVED		BIT(0)
-
-#define	TPS6507X_REG_CHGCONFIG0			0X03
-
-#define	TPS6507X_REG_CHGCONFIG1			0X04
-#define	TPS6507X_CON_CTRL1_DCDC1_ENABLE		BIT(4)
-#define	TPS6507X_CON_CTRL1_DCDC2_ENABLE		BIT(3)
-#define	TPS6507X_CON_CTRL1_DCDC3_ENABLE		BIT(2)
-#define	TPS6507X_CON_CTRL1_LDO1_ENABLE		BIT(1)
-#define	TPS6507X_CON_CTRL1_LDO2_ENABLE		BIT(0)
-
-#define	TPS6507X_REG_CHGCONFIG2			0X05
-
-#define	TPS6507X_REG_CHGCONFIG3			0X06
-
-#define	TPS6507X_REG_ADCONFIG			0X07
-#define	TPS6507X_ADCONFIG_AD_ENABLE		BIT(7)
-#define	TPS6507X_ADCONFIG_START_CONVERSION	BIT(6)
-#define	TPS6507X_ADCONFIG_CONVERSION_DONE	BIT(5)
-#define	TPS6507X_ADCONFIG_VREF_ENABLE		BIT(4)
-#define	TPS6507X_ADCONFIG_INPUT_AD_IN1		0
-#define	TPS6507X_ADCONFIG_INPUT_AD_IN2		1
-#define	TPS6507X_ADCONFIG_INPUT_AD_IN3		2
-#define	TPS6507X_ADCONFIG_INPUT_AD_IN4		3
-#define	TPS6507X_ADCONFIG_INPUT_TS_PIN		4
-#define	TPS6507X_ADCONFIG_INPUT_BAT_CURRENT	5
-#define	TPS6507X_ADCONFIG_INPUT_AC_VOLTAGE	6
-#define	TPS6507X_ADCONFIG_INPUT_SYS_VOLTAGE	7
-#define	TPS6507X_ADCONFIG_INPUT_CHARGER_VOLTAGE 8
-#define	TPS6507X_ADCONFIG_INPUT_BAT_VOLTAGE	9
-#define	TPS6507X_ADCONFIG_INPUT_THRESHOLD_VOLTAGE 10
-#define	TPS6507X_ADCONFIG_INPUT_ISET1_VOLTAGE	11
-#define	TPS6507X_ADCONFIG_INPUT_ISET2_VOLTAGE	12
-#define	TPS6507X_ADCONFIG_INPUT_REAL_TSC	14
-#define	TPS6507X_ADCONFIG_INPUT_TSC		15
-
-#define	TPS6507X_REG_TSCMODE			0X08
-#define	TPS6507X_TSCMODE_X_POSITION		0
-#define	TPS6507X_TSCMODE_Y_POSITION		1
-#define	TPS6507X_TSCMODE_PRESSURE		2
-#define	TPS6507X_TSCMODE_X_PLATE		3
-#define	TPS6507X_TSCMODE_Y_PLATE		4
-#define	TPS6507X_TSCMODE_STANDBY		5
-#define	TPS6507X_TSCMODE_ADC_INPUT		6
-#define	TPS6507X_TSCMODE_DISABLE		7
-
-#define	TPS6507X_REG_ADRESULT_1			0X09
-
-#define	TPS6507X_REG_ADRESULT_2			0X0A
-#define	TPS6507X_REG_ADRESULT_2_MASK		(BIT(1) | BIT(0))
-
-#define	TPS6507X_REG_PGOOD			0X0B
-
-#define	TPS6507X_REG_PGOODMASK			0X0C
-
-#define	TPS6507X_REG_CON_CTRL1			0X0D
-#define	TPS6507X_CON_CTRL1_DCDC1_ENABLE		BIT(4)
-#define	TPS6507X_CON_CTRL1_DCDC2_ENABLE		BIT(3)
-#define	TPS6507X_CON_CTRL1_DCDC3_ENABLE		BIT(2)
-#define	TPS6507X_CON_CTRL1_LDO1_ENABLE		BIT(1)
-#define	TPS6507X_CON_CTRL1_LDO2_ENABLE		BIT(0)
-
-#define	TPS6507X_REG_CON_CTRL2			0X0E
-
-#define	TPS6507X_REG_CON_CTRL3			0X0F
-
-#define	TPS6507X_REG_DEFDCDC1			0X10
-#define TPS6507X_DEFDCDC1_DCDC1_EXT_ADJ_EN	BIT(7)
-#define TPS6507X_DEFDCDC1_DCDC1_MASK		0X3F
-
-#define	TPS6507X_REG_DEFDCDC2_LOW		0X11
-#define TPS6507X_DEFDCDC2_LOW_DCDC2_MASK	0X3F
-
-#define	TPS6507X_REG_DEFDCDC2_HIGH		0X12
-#define TPS6507X_DEFDCDC2_HIGH_DCDC2_MASK	0X3F
-
-#define	TPS6507X_REG_DEFDCDC3_LOW		0X13
-#define TPS6507X_DEFDCDC3_LOW_DCDC3_MASK	0X3F
-
-#define	TPS6507X_REG_DEFDCDC3_HIGH		0X14
-#define TPS6507X_DEFDCDC3_HIGH_DCDC3_MASK	0X3F
-
-#define	TPS6507X_REG_DEFSLEW			0X15
-
-#define	TPS6507X_REG_LDO_CTRL1			0X16
-#define TPS6507X_REG_LDO_CTRL1_LDO1_MASK	0X0F
-
-#define	TPS6507X_REG_DEFLDO2			0X17
-#define TPS6507X_REG_DEFLDO2_LDO2_MASK		0X3F
-
-#define	TPS6507X_REG_WLED_CTRL1			0X18
-
-#define	TPS6507X_REG_WLED_CTRL2			0X19
-
-/* VDCDC MASK */
-#define TPS6507X_DEFDCDCX_DCDC_MASK		0X3F
-
-#define TPS6507X_MAX_REGISTER			0X19
-
-/**
- * struct tps6507x_board - packages regulator and touchscreen init data
- * @tps6507x_regulator_data: regulator initialization values
- *
- * Board data may be used to initialize regulator and touchscreen.
- */
-
-struct tps6507x_board {
-	struct regulator_init_data *tps6507x_pmic_init_data;
-	struct touchscreen_init_data *tps6507x_ts_init_data;
-};
-
-/**
- * struct tps6507x_dev - tps6507x sub-driver chip access routines
- * @read_dev() - I2C register read function
- * @write_dev() - I2C register write function
- *
- * Device data may be used to access the TPS6507x chip
- */
-
-struct tps6507x_dev {
-	struct device *dev;
-	struct i2c_client *i2c_client;
-	int (*read_dev)(struct tps6507x_dev *tps6507x, char reg, int size,
-			void *dest);
-	int (*write_dev)(struct tps6507x_dev *tps6507x, char reg, int size,
-			 void *src);
-
-	/* Client devices */
-	struct tps6507x_pmic *pmic;
-	struct tps6507x_ts *ts;
-};
-
-#endif /*  __LINUX_MFD_TPS6507X_H */
diff --git a/ANDROID_3.4.5/include/linux/mfd/tps65090.h b/ANDROID_3.4.5/include/linux/mfd/tps65090.h
deleted file mode 100644
index 38e31c55..00000000
--- a/ANDROID_3.4.5/include/linux/mfd/tps65090.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- * Core driver interface for TI TPS65090 PMIC family
- *
- * Copyright (C) 2012 NVIDIA Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
- *
- */
-
-#ifndef __LINUX_MFD_TPS65090_H
-#define __LINUX_MFD_TPS65090_H
-
-struct tps65090_subdev_info {
-	int		id;
-	const char	*name;
-	void		*platform_data;
-};
-
-struct tps65090_platform_data {
-	int irq_base;
-	int num_subdevs;
-	struct tps65090_subdev_info *subdevs;
-};
-
-/*
- * NOTE: the functions below are not intended for use outside
- * of the TPS65090 sub-device drivers
- */
-extern int tps65090_write(struct device *dev, int reg, uint8_t val);
-extern int tps65090_read(struct device *dev, int reg, uint8_t *val);
-extern int tps65090_set_bits(struct device *dev, int reg, uint8_t bit_num);
-extern int tps65090_clr_bits(struct device *dev, int reg, uint8_t bit_num);
-
-#endif /*__LINUX_MFD_TPS65090_H */
diff --git a/ANDROID_3.4.5/include/linux/mfd/tps65217.h b/ANDROID_3.4.5/include/linux/mfd/tps65217.h
deleted file mode 100644
index e030ef9a..00000000
--- a/ANDROID_3.4.5/include/linux/mfd/tps65217.h
+++ /dev/null
@@ -1,283 +0,0 @@
-/*
- * linux/mfd/tps65217.h
- *
- * Functions to access TPS65217 power management chip.
- *
- * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#ifndef __LINUX_MFD_TPS65217_H
-#define __LINUX_MFD_TPS65217_H
-
-#include <linux/i2c.h>
-#include <linux/regulator/driver.h>
-#include <linux/regulator/machine.h>
-
-/* I2C ID for TPS65217 part */
-#define TPS65217_I2C_ID			0x24
-
-/* All register addresses */
-#define TPS65217_REG_CHIPID		0X00
-#define TPS65217_REG_PPATH		0X01
-#define TPS65217_REG_INT		0X02
-#define TPS65217_REG_CHGCONFIG0		0X03
-#define TPS65217_REG_CHGCONFIG1		0X04
-#define TPS65217_REG_CHGCONFIG2		0X05
-#define TPS65217_REG_CHGCONFIG3		0X06
-#define TPS65217_REG_WLEDCTRL1		0X07
-#define TPS65217_REG_WLEDCTRL2		0X08
-#define TPS65217_REG_MUXCTRL		0X09
-#define TPS65217_REG_STATUS		0X0A
-#define TPS65217_REG_PASSWORD		0X0B
-#define TPS65217_REG_PGOOD		0X0C
-#define TPS65217_REG_DEFPG		0X0D
-#define TPS65217_REG_DEFDCDC1		0X0E
-#define TPS65217_REG_DEFDCDC2		0X0F
-#define TPS65217_REG_DEFDCDC3		0X10
-#define TPS65217_REG_DEFSLEW		0X11
-#define TPS65217_REG_DEFLDO1		0X12
-#define TPS65217_REG_DEFLDO2		0X13
-#define TPS65217_REG_DEFLS1		0X14
-#define TPS65217_REG_DEFLS2		0X15
-#define TPS65217_REG_ENABLE		0X16
-#define TPS65217_REG_DEFUVLO		0X18
-#define TPS65217_REG_SEQ1		0X19
-#define TPS65217_REG_SEQ2		0X1A
-#define TPS65217_REG_SEQ3		0X1B
-#define TPS65217_REG_SEQ4		0X1C
-#define TPS65217_REG_SEQ5		0X1D
-#define TPS65217_REG_SEQ6		0X1E
-
-/* Register field definitions */
-#define TPS65217_CHIPID_CHIP_MASK	0xF0
-#define TPS65217_CHIPID_REV_MASK	0x0F
-
-#define TPS65217_PPATH_ACSINK_ENABLE	BIT(7)
-#define TPS65217_PPATH_USBSINK_ENABLE	BIT(6)
-#define TPS65217_PPATH_AC_PW_ENABLE	BIT(5)
-#define TPS65217_PPATH_USB_PW_ENABLE	BIT(4)
-#define TPS65217_PPATH_AC_CURRENT_MASK	0x0C
-#define TPS65217_PPATH_USB_CURRENT_MASK	0x03
-
-#define TPS65217_INT_PBM		BIT(6)
-#define TPS65217_INT_ACM		BIT(5)
-#define TPS65217_INT_USBM		BIT(4)
-#define TPS65217_INT_PBI		BIT(2)
-#define TPS65217_INT_ACI		BIT(1)
-#define TPS65217_INT_USBI		BIT(0)
-
-#define TPS65217_CHGCONFIG0_TREG	BIT(7)
-#define TPS65217_CHGCONFIG0_DPPM	BIT(6)
-#define TPS65217_CHGCONFIG0_TSUSP	BIT(5)
-#define TPS65217_CHGCONFIG0_TERMI	BIT(4)
-#define TPS65217_CHGCONFIG0_ACTIVE	BIT(3)
-#define TPS65217_CHGCONFIG0_CHGTOUT	BIT(2)
-#define TPS65217_CHGCONFIG0_PCHGTOUT	BIT(1)
-#define TPS65217_CHGCONFIG0_BATTEMP	BIT(0)
-
-#define TPS65217_CHGCONFIG1_TMR_MASK	0xC0
-#define TPS65217_CHGCONFIG1_TMR_ENABLE	BIT(5)
-#define TPS65217_CHGCONFIG1_NTC_TYPE	BIT(4)
-#define TPS65217_CHGCONFIG1_RESET	BIT(3)
-#define TPS65217_CHGCONFIG1_TERM	BIT(2)
-#define TPS65217_CHGCONFIG1_SUSP	BIT(1)
-#define TPS65217_CHGCONFIG1_CHG_EN	BIT(0)
-
-#define TPS65217_CHGCONFIG2_DYNTMR	BIT(7)
-#define TPS65217_CHGCONFIG2_VPREGHG	BIT(6)
-#define TPS65217_CHGCONFIG2_VOREG_MASK	0x30
-
-#define TPS65217_CHGCONFIG3_ICHRG_MASK	0xC0
-#define TPS65217_CHGCONFIG3_DPPMTH_MASK	0x30
-#define TPS65217_CHGCONFIG2_PCHRGT	BIT(3)
-#define TPS65217_CHGCONFIG2_TERMIF	0x06
-#define TPS65217_CHGCONFIG2_TRANGE	BIT(0)
-
-#define TPS65217_WLEDCTRL1_ISINK_ENABLE	BIT(3)
-#define TPS65217_WLEDCTRL1_ISEL		BIT(2)
-#define TPS65217_WLEDCTRL1_FDIM_MASK	0x03
-
-#define TPS65217_WLEDCTRL2_DUTY_MASK	0x7F
-
-#define TPS65217_MUXCTRL_MUX_MASK	0x07
-
-#define TPS65217_STATUS_OFF		BIT(7)
-#define TPS65217_STATUS_ACPWR		BIT(3)
-#define TPS65217_STATUS_USBPWR		BIT(2)
-#define TPS65217_STATUS_PB		BIT(0)
-
-#define TPS65217_PASSWORD_REGS_UNLOCK	0x7D
-
-#define TPS65217_PGOOD_LDO3_PG		BIT(6)
-#define TPS65217_PGOOD_LDO4_PG		BIT(5)
-#define TPS65217_PGOOD_DC1_PG		BIT(4)
-#define TPS65217_PGOOD_DC2_PG		BIT(3)
-#define TPS65217_PGOOD_DC3_PG		BIT(2)
-#define TPS65217_PGOOD_LDO1_PG		BIT(1)
-#define TPS65217_PGOOD_LDO2_PG		BIT(0)
-
-#define TPS65217_DEFPG_LDO1PGM		BIT(3)
-#define TPS65217_DEFPG_LDO2PGM		BIT(2)
-#define TPS65217_DEFPG_PGDLY_MASK	0x03
-
-#define TPS65217_DEFDCDCX_XADJX		BIT(7)
-#define TPS65217_DEFDCDCX_DCDC_MASK	0x3F
-
-#define TPS65217_DEFSLEW_GO		BIT(7)
-#define TPS65217_DEFSLEW_GODSBL		BIT(6)
-#define TPS65217_DEFSLEW_PFM_EN1	BIT(5)
-#define TPS65217_DEFSLEW_PFM_EN2	BIT(4)
-#define TPS65217_DEFSLEW_PFM_EN3	BIT(3)
-#define TPS65217_DEFSLEW_SLEW_MASK	0x07
-
-#define TPS65217_DEFLDO1_LDO1_MASK	0x0F
-
-#define TPS65217_DEFLDO2_TRACK		BIT(6)
-#define TPS65217_DEFLDO2_LDO2_MASK	0x3F
-
-#define TPS65217_DEFLDO3_LDO3_EN	BIT(5)
-#define TPS65217_DEFLDO3_LDO3_MASK	0x1F
-
-#define TPS65217_DEFLDO4_LDO4_EN	BIT(5)
-#define TPS65217_DEFLDO4_LDO4_MASK	0x1F
-
-#define TPS65217_ENABLE_LS1_EN		BIT(6)
-#define TPS65217_ENABLE_LS2_EN		BIT(5)
-#define TPS65217_ENABLE_DC1_EN		BIT(4)
-#define TPS65217_ENABLE_DC2_EN		BIT(3)
-#define TPS65217_ENABLE_DC3_EN		BIT(2)
-#define TPS65217_ENABLE_LDO1_EN		BIT(1)
-#define TPS65217_ENABLE_LDO2_EN		BIT(0)
-
-#define TPS65217_DEFUVLO_UVLOHYS	BIT(2)
-#define TPS65217_DEFUVLO_UVLO_MASK	0x03
-
-#define TPS65217_SEQ1_DC1_SEQ_MASK	0xF0
-#define TPS65217_SEQ1_DC2_SEQ_MASK	0x0F
-
-#define TPS65217_SEQ2_DC3_SEQ_MASK	0xF0
-#define TPS65217_SEQ2_LDO1_SEQ_MASK	0x0F
-
-#define TPS65217_SEQ3_LDO2_SEQ_MASK	0xF0
-#define TPS65217_SEQ3_LDO3_SEQ_MASK	0x0F
-
-#define TPS65217_SEQ4_LDO4_SEQ_MASK	0xF0
-
-#define TPS65217_SEQ5_DLY1_MASK		0xC0
-#define TPS65217_SEQ5_DLY2_MASK		0x30
-#define TPS65217_SEQ5_DLY3_MASK		0x0C
-#define TPS65217_SEQ5_DLY4_MASK		0x03
-
-#define TPS65217_SEQ6_DLY5_MASK		0xC0
-#define TPS65217_SEQ6_DLY6_MASK		0x30
-#define TPS65217_SEQ6_SEQUP		BIT(2)
-#define TPS65217_SEQ6_SEQDWN		BIT(1)
-#define TPS65217_SEQ6_INSTDWN		BIT(0)
-
-#define TPS65217_MAX_REGISTER		0x1E
-#define TPS65217_PROTECT_NONE		0
-#define TPS65217_PROTECT_L1		1
-#define TPS65217_PROTECT_L2		2
-
-
-enum tps65217_regulator_id {
-	/* DCDC's */
-	TPS65217_DCDC_1,
-	TPS65217_DCDC_2,
-	TPS65217_DCDC_3,
-	/* LDOs */
-	TPS65217_LDO_1,
-	TPS65217_LDO_2,
-	TPS65217_LDO_3,
-	TPS65217_LDO_4,
-};
-
-#define TPS65217_MAX_REG_ID		TPS65217_LDO_4
-
-/* Number of step-down converters available */
-#define TPS65217_NUM_DCDC		3
-/* Number of LDO voltage regulators available */
-#define TPS65217_NUM_LDO		4
-/* Number of total regulators available */
-#define TPS65217_NUM_REGULATOR		(TPS65217_NUM_DCDC + TPS65217_NUM_LDO)
-
-/**
- * struct tps65217_board - packages regulator init data
- * @tps65217_regulator_data: regulator initialization values
- *
- * Board data may be used to initialize regulator.
- */
-struct tps65217_board {
-	struct regulator_init_data *tps65217_init_data;
-};
-
-/**
- * struct tps_info - packages regulator constraints
- * @name:		Voltage regulator name
- * @min_uV:		minimum micro volts
- * @max_uV:		minimum micro volts
- * @vsel_to_uv:		Function pointer to get voltage from selector
- * @uv_to_vsel:		Function pointer to get selector from voltage
- * @table:		Table for non-uniform voltage step-size
- * @table_len:		Length of the voltage table
- * @enable_mask:	Regulator enable mask bits
- * @set_vout_reg:	Regulator output voltage set register
- * @set_vout_mask:	Regulator output voltage set mask
- *
- * This data is used to check the regualtor voltage limits while setting.
- */
-struct tps_info {
-	const char *name;
-	int min_uV;
-	int max_uV;
-	int (*vsel_to_uv)(unsigned int vsel);
-	int (*uv_to_vsel)(int uV, unsigned int *vsel);
-	const int *table;
-	unsigned int table_len;
-	unsigned int enable_mask;
-	unsigned int set_vout_reg;
-	unsigned int set_vout_mask;
-};
-
-/**
- * struct tps65217 - tps65217 sub-driver chip access routines
- *
- * Device data may be used to access the TPS65217 chip
- */
-
-struct tps65217 {
-	struct device *dev;
-	struct tps65217_board *pdata;
-	struct regulator_desc desc[TPS65217_NUM_REGULATOR];
-	struct regulator_dev *rdev[TPS65217_NUM_REGULATOR];
-	struct tps_info *info[TPS65217_NUM_REGULATOR];
-	struct regmap *regmap;
-
-	/* Client devices */
-	struct platform_device *regulator_pdev[TPS65217_NUM_REGULATOR];
-};
-
-static inline struct tps65217 *dev_to_tps65217(struct device *dev)
-{
-	return dev_get_drvdata(dev);
-}
-
-int tps65217_reg_read(struct tps65217 *tps, unsigned int reg,
-					unsigned int *val);
-int tps65217_reg_write(struct tps65217 *tps, unsigned int reg,
-			unsigned int val, unsigned int level);
-int tps65217_set_bits(struct tps65217 *tps, unsigned int reg,
-		unsigned int mask, unsigned int val, unsigned int level);
-int tps65217_clear_bits(struct tps65217 *tps, unsigned int reg,
-		unsigned int mask, unsigned int level);
-
-#endif /*  __LINUX_MFD_TPS65217_H */
diff --git a/ANDROID_3.4.5/include/linux/mfd/tps6586x.h b/ANDROID_3.4.5/include/linux/mfd/tps6586x.h
deleted file mode 100644
index b19176ea..00000000
--- a/ANDROID_3.4.5/include/linux/mfd/tps6586x.h
+++ /dev/null
@@ -1,94 +0,0 @@
-#ifndef __LINUX_MFD_TPS6586X_H
-#define __LINUX_MFD_TPS6586X_H
-
-#define TPS6586X_SLEW_RATE_INSTANTLY	0x00
-#define TPS6586X_SLEW_RATE_110UV	0x01
-#define TPS6586X_SLEW_RATE_220UV	0x02
-#define TPS6586X_SLEW_RATE_440UV	0x03
-#define TPS6586X_SLEW_RATE_880UV	0x04
-#define TPS6586X_SLEW_RATE_1760UV	0x05
-#define TPS6586X_SLEW_RATE_3520UV	0x06
-#define TPS6586X_SLEW_RATE_7040UV	0x07
-
-#define TPS6586X_SLEW_RATE_SET		0x08
-#define TPS6586X_SLEW_RATE_MASK         0x07
-
-enum {
-	TPS6586X_ID_SM_0,
-	TPS6586X_ID_SM_1,
-	TPS6586X_ID_SM_2,
-	TPS6586X_ID_LDO_0,
-	TPS6586X_ID_LDO_1,
-	TPS6586X_ID_LDO_2,
-	TPS6586X_ID_LDO_3,
-	TPS6586X_ID_LDO_4,
-	TPS6586X_ID_LDO_5,
-	TPS6586X_ID_LDO_6,
-	TPS6586X_ID_LDO_7,
-	TPS6586X_ID_LDO_8,
-	TPS6586X_ID_LDO_9,
-	TPS6586X_ID_LDO_RTC,
-};
-
-enum {
-	TPS6586X_INT_PLDO_0,
-	TPS6586X_INT_PLDO_1,
-	TPS6586X_INT_PLDO_2,
-	TPS6586X_INT_PLDO_3,
-	TPS6586X_INT_PLDO_4,
-	TPS6586X_INT_PLDO_5,
-	TPS6586X_INT_PLDO_6,
-	TPS6586X_INT_PLDO_7,
-	TPS6586X_INT_COMP_DET,
-	TPS6586X_INT_ADC,
-	TPS6586X_INT_PLDO_8,
-	TPS6586X_INT_PLDO_9,
-	TPS6586X_INT_PSM_0,
-	TPS6586X_INT_PSM_1,
-	TPS6586X_INT_PSM_2,
-	TPS6586X_INT_PSM_3,
-	TPS6586X_INT_RTC_ALM1,
-	TPS6586X_INT_ACUSB_OVP,
-	TPS6586X_INT_USB_DET,
-	TPS6586X_INT_AC_DET,
-	TPS6586X_INT_BAT_DET,
-	TPS6586X_INT_CHG_STAT,
-	TPS6586X_INT_CHG_TEMP,
-	TPS6586X_INT_PP,
-	TPS6586X_INT_RESUME,
-	TPS6586X_INT_LOW_SYS,
-	TPS6586X_INT_RTC_ALM2,
-};
-
-struct tps6586x_settings {
-	int slew_rate;
-};
-
-struct tps6586x_subdev_info {
-	int		id;
-	const char	*name;
-	void		*platform_data;
-};
-
-struct tps6586x_platform_data {
-	int num_subdevs;
-	struct tps6586x_subdev_info *subdevs;
-
-	int gpio_base;
-	int irq_base;
-};
-
-/*
- * NOTE: the functions below are not intended for use outside
- * of the TPS6586X sub-device drivers
- */
-extern int tps6586x_write(struct device *dev, int reg, uint8_t val);
-extern int tps6586x_writes(struct device *dev, int reg, int len, uint8_t *val);
-extern int tps6586x_read(struct device *dev, int reg, uint8_t *val);
-extern int tps6586x_reads(struct device *dev, int reg, int len, uint8_t *val);
-extern int tps6586x_set_bits(struct device *dev, int reg, uint8_t bit_mask);
-extern int tps6586x_clr_bits(struct device *dev, int reg, uint8_t bit_mask);
-extern int tps6586x_update(struct device *dev, int reg, uint8_t val,
-			   uint8_t mask);
-
-#endif /*__LINUX_MFD_TPS6586X_H */
diff --git a/ANDROID_3.4.5/include/linux/mfd/tps65910.h b/ANDROID_3.4.5/include/linux/mfd/tps65910.h
deleted file mode 100644
index 1c6c2860..00000000
--- a/ANDROID_3.4.5/include/linux/mfd/tps65910.h
+++ /dev/null
@@ -1,848 +0,0 @@
-/*
- * tps65910.h  --  TI TPS6591x
- *
- * Copyright 2010-2011 Texas Instruments Inc.
- *
- * Author: Graeme Gregory <gg@slimlogic.co.uk>
- * Author: Jorge Eduardo Candelaria <jedu@slimlogic.co.uk>
- * Author: Arnaud Deconinck <a-deconinck@ti.com>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under  the terms of the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the License, or (at your
- *  option) any later version.
- *
- */
-
-#ifndef __LINUX_MFD_TPS65910_H
-#define __LINUX_MFD_TPS65910_H
-
-#include <linux/gpio.h>
-
-/* TPS chip id list */
-#define TPS65910			0
-#define TPS65911			1
-
-/* TPS regulator type list */
-#define REGULATOR_LDO			0
-#define REGULATOR_DCDC			1
-
-/*
- * List of registers for component TPS65910
- *
- */
-
-#define TPS65910_SECONDS				0x0
-#define TPS65910_MINUTES				0x1
-#define TPS65910_HOURS					0x2
-#define TPS65910_DAYS					0x3
-#define TPS65910_MONTHS					0x4
-#define TPS65910_YEARS					0x5
-#define TPS65910_WEEKS					0x6
-#define TPS65910_ALARM_SECONDS				0x8
-#define TPS65910_ALARM_MINUTES				0x9
-#define TPS65910_ALARM_HOURS				0xA
-#define TPS65910_ALARM_DAYS				0xB
-#define TPS65910_ALARM_MONTHS				0xC
-#define TPS65910_ALARM_YEARS				0xD
-#define TPS65910_RTC_CTRL				0x10
-#define TPS65910_RTC_STATUS				0x11
-#define TPS65910_RTC_INTERRUPTS				0x12
-#define TPS65910_RTC_COMP_LSB				0x13
-#define TPS65910_RTC_COMP_MSB				0x14
-#define TPS65910_RTC_RES_PROG				0x15
-#define TPS65910_RTC_RESET_STATUS			0x16
-#define TPS65910_BCK1					0x17
-#define TPS65910_BCK2					0x18
-#define TPS65910_BCK3					0x19
-#define TPS65910_BCK4					0x1A
-#define TPS65910_BCK5					0x1B
-#define TPS65910_PUADEN					0x1C
-#define TPS65910_REF					0x1D
-#define TPS65910_VRTC					0x1E
-#define TPS65910_VIO					0x20
-#define TPS65910_VDD1					0x21
-#define TPS65910_VDD1_OP				0x22
-#define TPS65910_VDD1_SR				0x23
-#define TPS65910_VDD2					0x24
-#define TPS65910_VDD2_OP				0x25
-#define TPS65910_VDD2_SR				0x26
-#define TPS65910_VDD3					0x27
-#define TPS65910_VDIG1					0x30
-#define TPS65910_VDIG2					0x31
-#define TPS65910_VAUX1					0x32
-#define TPS65910_VAUX2					0x33
-#define TPS65910_VAUX33					0x34
-#define TPS65910_VMMC					0x35
-#define TPS65910_VPLL					0x36
-#define TPS65910_VDAC					0x37
-#define TPS65910_THERM					0x38
-#define TPS65910_BBCH					0x39
-#define TPS65910_DCDCCTRL				0x3E
-#define TPS65910_DEVCTRL				0x3F
-#define TPS65910_DEVCTRL2				0x40
-#define TPS65910_SLEEP_KEEP_LDO_ON			0x41
-#define TPS65910_SLEEP_KEEP_RES_ON			0x42
-#define TPS65910_SLEEP_SET_LDO_OFF			0x43
-#define TPS65910_SLEEP_SET_RES_OFF			0x44
-#define TPS65910_EN1_LDO_ASS				0x45
-#define TPS65910_EN1_SMPS_ASS				0x46
-#define TPS65910_EN2_LDO_ASS				0x47
-#define TPS65910_EN2_SMPS_ASS				0x48
-#define TPS65910_EN3_LDO_ASS				0x49
-#define TPS65910_SPARE					0x4A
-#define TPS65910_INT_STS				0x50
-#define TPS65910_INT_MSK				0x51
-#define TPS65910_INT_STS2				0x52
-#define TPS65910_INT_MSK2				0x53
-#define TPS65910_INT_STS3				0x54
-#define TPS65910_INT_MSK3				0x55
-#define TPS65910_GPIO0					0x60
-#define TPS65910_GPIO1					0x61
-#define TPS65910_GPIO2					0x62
-#define TPS65910_GPIO3					0x63
-#define TPS65910_GPIO4					0x64
-#define TPS65910_GPIO5					0x65
-#define TPS65910_GPIO6					0x66
-#define TPS65910_GPIO7					0x67
-#define TPS65910_GPIO8					0x68
-#define TPS65910_JTAGVERNUM				0x80
-#define TPS65910_MAX_REGISTER				0x80
-
-/*
- * List of registers specific to TPS65911
- */
-#define TPS65911_VDDCTRL				0x27
-#define TPS65911_VDDCTRL_OP				0x28
-#define TPS65911_VDDCTRL_SR				0x29
-#define TPS65911_LDO1					0x30
-#define TPS65911_LDO2					0x31
-#define TPS65911_LDO5					0x32
-#define TPS65911_LDO8					0x33
-#define TPS65911_LDO7					0x34
-#define TPS65911_LDO6					0x35
-#define TPS65911_LDO4					0x36
-#define TPS65911_LDO3					0x37
-#define TPS65911_VMBCH					0x6A
-#define TPS65911_VMBCH2					0x6B
-
-/*
- * List of register bitfields for component TPS65910
- *
- */
-
-
-/*Register BCK1  (0x80) register.RegisterDescription */
-#define BCK1_BCKUP_MASK					0xFF
-#define BCK1_BCKUP_SHIFT				0
-
-
-/*Register BCK2  (0x80) register.RegisterDescription */
-#define BCK2_BCKUP_MASK					0xFF
-#define BCK2_BCKUP_SHIFT				0
-
-
-/*Register BCK3  (0x80) register.RegisterDescription */
-#define BCK3_BCKUP_MASK					0xFF
-#define BCK3_BCKUP_SHIFT				0
-
-
-/*Register BCK4  (0x80) register.RegisterDescription */
-#define BCK4_BCKUP_MASK					0xFF
-#define BCK4_BCKUP_SHIFT				0
-
-
-/*Register BCK5  (0x80) register.RegisterDescription */
-#define BCK5_BCKUP_MASK					0xFF
-#define BCK5_BCKUP_SHIFT				0
-
-
-/*Register PUADEN  (0x80) register.RegisterDescription */
-#define PUADEN_EN3P_MASK				0x80
-#define PUADEN_EN3P_SHIFT				7
-#define PUADEN_I2CCTLP_MASK				0x40
-#define PUADEN_I2CCTLP_SHIFT				6
-#define PUADEN_I2CSRP_MASK				0x20
-#define PUADEN_I2CSRP_SHIFT				5
-#define PUADEN_PWRONP_MASK				0x10
-#define PUADEN_PWRONP_SHIFT				4
-#define PUADEN_SLEEPP_MASK				0x08
-#define PUADEN_SLEEPP_SHIFT				3
-#define PUADEN_PWRHOLDP_MASK				0x04
-#define PUADEN_PWRHOLDP_SHIFT				2
-#define PUADEN_BOOT1P_MASK				0x02
-#define PUADEN_BOOT1P_SHIFT				1
-#define PUADEN_BOOT0P_MASK				0x01
-#define PUADEN_BOOT0P_SHIFT				0
-
-
-/*Register REF	(0x80) register.RegisterDescription */
-#define REF_VMBCH_SEL_MASK				0x0C
-#define REF_VMBCH_SEL_SHIFT				2
-#define REF_ST_MASK					0x03
-#define REF_ST_SHIFT					0
-
-
-/*Register VRTC  (0x80) register.RegisterDescription */
-#define VRTC_VRTC_OFFMASK_MASK				0x08
-#define VRTC_VRTC_OFFMASK_SHIFT				3
-#define VRTC_ST_MASK					0x03
-#define VRTC_ST_SHIFT					0
-
-
-/*Register VIO	(0x80) register.RegisterDescription */
-#define VIO_ILMAX_MASK					0xC0
-#define VIO_ILMAX_SHIFT					6
-#define VIO_SEL_MASK					0x0C
-#define VIO_SEL_SHIFT					2
-#define VIO_ST_MASK					0x03
-#define VIO_ST_SHIFT					0
-
-
-/*Register VDD1  (0x80) register.RegisterDescription */
-#define VDD1_VGAIN_SEL_MASK				0xC0
-#define VDD1_VGAIN_SEL_SHIFT				6
-#define VDD1_ILMAX_MASK					0x20
-#define VDD1_ILMAX_SHIFT				5
-#define VDD1_TSTEP_MASK					0x1C
-#define VDD1_TSTEP_SHIFT				2
-#define VDD1_ST_MASK					0x03
-#define VDD1_ST_SHIFT					0
-
-
-/*Register VDD1_OP  (0x80) register.RegisterDescription */
-#define VDD1_OP_CMD_MASK				0x80
-#define VDD1_OP_CMD_SHIFT				7
-#define VDD1_OP_SEL_MASK				0x7F
-#define VDD1_OP_SEL_SHIFT				0
-
-
-/*Register VDD1_SR  (0x80) register.RegisterDescription */
-#define VDD1_SR_SEL_MASK				0x7F
-#define VDD1_SR_SEL_SHIFT				0
-
-
-/*Register VDD2  (0x80) register.RegisterDescription */
-#define VDD2_VGAIN_SEL_MASK				0xC0
-#define VDD2_VGAIN_SEL_SHIFT				6
-#define VDD2_ILMAX_MASK					0x20
-#define VDD2_ILMAX_SHIFT				5
-#define VDD2_TSTEP_MASK					0x1C
-#define VDD2_TSTEP_SHIFT				2
-#define VDD2_ST_MASK					0x03
-#define VDD2_ST_SHIFT					0
-
-
-/*Register VDD2_OP  (0x80) register.RegisterDescription */
-#define VDD2_OP_CMD_MASK				0x80
-#define VDD2_OP_CMD_SHIFT				7
-#define VDD2_OP_SEL_MASK				0x7F
-#define VDD2_OP_SEL_SHIFT				0
-
-/*Register VDD2_SR  (0x80) register.RegisterDescription */
-#define VDD2_SR_SEL_MASK				0x7F
-#define VDD2_SR_SEL_SHIFT				0
-
-
-/*Registers VDD1, VDD2 voltage values definitions */
-#define VDD1_2_NUM_VOLT_FINE				73
-#define VDD1_2_NUM_VOLT_COARSE				3
-#define VDD1_2_MIN_VOLT					6000
-#define VDD1_2_OFFSET					125
-
-
-/*Register VDD3  (0x80) register.RegisterDescription */
-#define VDD3_CKINEN_MASK				0x04
-#define VDD3_CKINEN_SHIFT				2
-#define VDD3_ST_MASK					0x03
-#define VDD3_ST_SHIFT					0
-#define VDDCTRL_MIN_VOLT				6000
-#define VDDCTRL_OFFSET					125
-
-/*Registers VDIG (0x80) to VDAC register.RegisterDescription */
-#define LDO_SEL_MASK					0x0C
-#define LDO_SEL_SHIFT					2
-#define LDO_ST_MASK					0x03
-#define LDO_ST_SHIFT					0
-#define LDO_ST_ON_BIT					0x01
-#define LDO_ST_MODE_BIT					0x02	
-
-
-/* Registers LDO1 to LDO8 in tps65910 */
-#define LDO1_SEL_MASK					0xFC
-#define LDO3_SEL_MASK					0x7C
-#define LDO_MIN_VOLT					1000
-#define LDO_MAX_VOLT					3300
-
-
-/*Register VDIG1  (0x80) register.RegisterDescription */
-#define VDIG1_SEL_MASK					0x0C
-#define VDIG1_SEL_SHIFT					2
-#define VDIG1_ST_MASK					0x03
-#define VDIG1_ST_SHIFT					0
-
-
-/*Register VDIG2  (0x80) register.RegisterDescription */
-#define VDIG2_SEL_MASK					0x0C
-#define VDIG2_SEL_SHIFT					2
-#define VDIG2_ST_MASK					0x03
-#define VDIG2_ST_SHIFT					0
-
-
-/*Register VAUX1  (0x80) register.RegisterDescription */
-#define VAUX1_SEL_MASK					0x0C
-#define VAUX1_SEL_SHIFT					2
-#define VAUX1_ST_MASK					0x03
-#define VAUX1_ST_SHIFT					0
-
-
-/*Register VAUX2  (0x80) register.RegisterDescription */
-#define VAUX2_SEL_MASK					0x0C
-#define VAUX2_SEL_SHIFT					2
-#define VAUX2_ST_MASK					0x03
-#define VAUX2_ST_SHIFT					0
-
-
-/*Register VAUX33  (0x80) register.RegisterDescription */
-#define VAUX33_SEL_MASK					0x0C
-#define VAUX33_SEL_SHIFT				2
-#define VAUX33_ST_MASK					0x03
-#define VAUX33_ST_SHIFT					0
-
-
-/*Register VMMC  (0x80) register.RegisterDescription */
-#define VMMC_SEL_MASK					0x0C
-#define VMMC_SEL_SHIFT					2
-#define VMMC_ST_MASK					0x03
-#define VMMC_ST_SHIFT					0
-
-
-/*Register VPLL  (0x80) register.RegisterDescription */
-#define VPLL_SEL_MASK					0x0C
-#define VPLL_SEL_SHIFT					2
-#define VPLL_ST_MASK					0x03
-#define VPLL_ST_SHIFT					0
-
-
-/*Register VDAC  (0x80) register.RegisterDescription */
-#define VDAC_SEL_MASK					0x0C
-#define VDAC_SEL_SHIFT					2
-#define VDAC_ST_MASK					0x03
-#define VDAC_ST_SHIFT					0
-
-
-/*Register THERM  (0x80) register.RegisterDescription */
-#define THERM_THERM_HD_MASK				0x20
-#define THERM_THERM_HD_SHIFT				5
-#define THERM_THERM_TS_MASK				0x10
-#define THERM_THERM_TS_SHIFT				4
-#define THERM_THERM_HDSEL_MASK				0x0C
-#define THERM_THERM_HDSEL_SHIFT				2
-#define THERM_RSVD1_MASK				0x02
-#define THERM_RSVD1_SHIFT				1
-#define THERM_THERM_STATE_MASK				0x01
-#define THERM_THERM_STATE_SHIFT				0
-
-
-/*Register BBCH  (0x80) register.RegisterDescription */
-#define BBCH_BBSEL_MASK					0x06
-#define BBCH_BBSEL_SHIFT				1
-#define BBCH_BBCHEN_MASK				0x01
-#define BBCH_BBCHEN_SHIFT				0
-
-
-/*Register DCDCCTRL  (0x80) register.RegisterDescription */
-#define DCDCCTRL_VDD2_PSKIP_MASK			0x20
-#define DCDCCTRL_VDD2_PSKIP_SHIFT			5
-#define DCDCCTRL_VDD1_PSKIP_MASK			0x10
-#define DCDCCTRL_VDD1_PSKIP_SHIFT			4
-#define DCDCCTRL_VIO_PSKIP_MASK				0x08
-#define DCDCCTRL_VIO_PSKIP_SHIFT			3
-#define DCDCCTRL_DCDCCKEXT_MASK				0x04
-#define DCDCCTRL_DCDCCKEXT_SHIFT			2
-#define DCDCCTRL_DCDCCKSYNC_MASK			0x03
-#define DCDCCTRL_DCDCCKSYNC_SHIFT			0
-
-
-/*Register DEVCTRL  (0x80) register.RegisterDescription */
-#define DEVCTRL_RTC_PWDN_MASK				0x40
-#define DEVCTRL_RTC_PWDN_SHIFT				6
-#define DEVCTRL_CK32K_CTRL_MASK				0x20
-#define DEVCTRL_CK32K_CTRL_SHIFT			5
-#define DEVCTRL_SR_CTL_I2C_SEL_MASK			0x10
-#define DEVCTRL_SR_CTL_I2C_SEL_SHIFT			4
-#define DEVCTRL_DEV_OFF_RST_MASK			0x08
-#define DEVCTRL_DEV_OFF_RST_SHIFT			3
-#define DEVCTRL_DEV_ON_MASK				0x04
-#define DEVCTRL_DEV_ON_SHIFT				2
-#define DEVCTRL_DEV_SLP_MASK				0x02
-#define DEVCTRL_DEV_SLP_SHIFT				1
-#define DEVCTRL_DEV_OFF_MASK				0x01
-#define DEVCTRL_DEV_OFF_SHIFT				0
-
-
-/*Register DEVCTRL2  (0x80) register.RegisterDescription */
-#define DEVCTRL2_TSLOT_LENGTH_MASK			0x30
-#define DEVCTRL2_TSLOT_LENGTH_SHIFT			4
-#define DEVCTRL2_SLEEPSIG_POL_MASK			0x08
-#define DEVCTRL2_SLEEPSIG_POL_SHIFT			3
-#define DEVCTRL2_PWON_LP_OFF_MASK			0x04
-#define DEVCTRL2_PWON_LP_OFF_SHIFT			2
-#define DEVCTRL2_PWON_LP_RST_MASK			0x02
-#define DEVCTRL2_PWON_LP_RST_SHIFT			1
-#define DEVCTRL2_IT_POL_MASK				0x01
-#define DEVCTRL2_IT_POL_SHIFT				0
-
-
-/*Register SLEEP_KEEP_LDO_ON  (0x80) register.RegisterDescription */
-#define SLEEP_KEEP_LDO_ON_VDAC_KEEPON_MASK		0x80
-#define SLEEP_KEEP_LDO_ON_VDAC_KEEPON_SHIFT		7
-#define SLEEP_KEEP_LDO_ON_VPLL_KEEPON_MASK		0x40
-#define SLEEP_KEEP_LDO_ON_VPLL_KEEPON_SHIFT		6
-#define SLEEP_KEEP_LDO_ON_VAUX33_KEEPON_MASK		0x20
-#define SLEEP_KEEP_LDO_ON_VAUX33_KEEPON_SHIFT		5
-#define SLEEP_KEEP_LDO_ON_VAUX2_KEEPON_MASK		0x10
-#define SLEEP_KEEP_LDO_ON_VAUX2_KEEPON_SHIFT		4
-#define SLEEP_KEEP_LDO_ON_VAUX1_KEEPON_MASK		0x08
-#define SLEEP_KEEP_LDO_ON_VAUX1_KEEPON_SHIFT		3
-#define SLEEP_KEEP_LDO_ON_VDIG2_KEEPON_MASK		0x04
-#define SLEEP_KEEP_LDO_ON_VDIG2_KEEPON_SHIFT		2
-#define SLEEP_KEEP_LDO_ON_VDIG1_KEEPON_MASK		0x02
-#define SLEEP_KEEP_LDO_ON_VDIG1_KEEPON_SHIFT		1
-#define SLEEP_KEEP_LDO_ON_VMMC_KEEPON_MASK		0x01
-#define SLEEP_KEEP_LDO_ON_VMMC_KEEPON_SHIFT		0
-
-
-/*Register SLEEP_KEEP_RES_ON  (0x80) register.RegisterDescription */
-#define SLEEP_KEEP_RES_ON_THERM_KEEPON_MASK		0x80
-#define SLEEP_KEEP_RES_ON_THERM_KEEPON_SHIFT		7
-#define SLEEP_KEEP_RES_ON_CLKOUT32K_KEEPON_MASK		0x40
-#define SLEEP_KEEP_RES_ON_CLKOUT32K_KEEPON_SHIFT	6
-#define SLEEP_KEEP_RES_ON_VRTC_KEEPON_MASK		0x20
-#define SLEEP_KEEP_RES_ON_VRTC_KEEPON_SHIFT		5
-#define SLEEP_KEEP_RES_ON_I2CHS_KEEPON_MASK		0x10
-#define SLEEP_KEEP_RES_ON_I2CHS_KEEPON_SHIFT		4
-#define SLEEP_KEEP_RES_ON_VDD3_KEEPON_MASK		0x08
-#define SLEEP_KEEP_RES_ON_VDD3_KEEPON_SHIFT		3
-#define SLEEP_KEEP_RES_ON_VDD2_KEEPON_MASK		0x04
-#define SLEEP_KEEP_RES_ON_VDD2_KEEPON_SHIFT		2
-#define SLEEP_KEEP_RES_ON_VDD1_KEEPON_MASK		0x02
-#define SLEEP_KEEP_RES_ON_VDD1_KEEPON_SHIFT		1
-#define SLEEP_KEEP_RES_ON_VIO_KEEPON_MASK		0x01
-#define SLEEP_KEEP_RES_ON_VIO_KEEPON_SHIFT		0
-
-
-/*Register SLEEP_SET_LDO_OFF  (0x80) register.RegisterDescription */
-#define SLEEP_SET_LDO_OFF_VDAC_SETOFF_MASK		0x80
-#define SLEEP_SET_LDO_OFF_VDAC_SETOFF_SHIFT		7
-#define SLEEP_SET_LDO_OFF_VPLL_SETOFF_MASK		0x40
-#define SLEEP_SET_LDO_OFF_VPLL_SETOFF_SHIFT		6
-#define SLEEP_SET_LDO_OFF_VAUX33_SETOFF_MASK		0x20
-#define SLEEP_SET_LDO_OFF_VAUX33_SETOFF_SHIFT		5
-#define SLEEP_SET_LDO_OFF_VAUX2_SETOFF_MASK		0x10
-#define SLEEP_SET_LDO_OFF_VAUX2_SETOFF_SHIFT		4
-#define SLEEP_SET_LDO_OFF_VAUX1_SETOFF_MASK		0x08
-#define SLEEP_SET_LDO_OFF_VAUX1_SETOFF_SHIFT		3
-#define SLEEP_SET_LDO_OFF_VDIG2_SETOFF_MASK		0x04
-#define SLEEP_SET_LDO_OFF_VDIG2_SETOFF_SHIFT		2
-#define SLEEP_SET_LDO_OFF_VDIG1_SETOFF_MASK		0x02
-#define SLEEP_SET_LDO_OFF_VDIG1_SETOFF_SHIFT		1
-#define SLEEP_SET_LDO_OFF_VMMC_SETOFF_MASK		0x01
-#define SLEEP_SET_LDO_OFF_VMMC_SETOFF_SHIFT		0
-
-
-/*Register SLEEP_SET_RES_OFF  (0x80) register.RegisterDescription */
-#define SLEEP_SET_RES_OFF_DEFAULT_VOLT_MASK		0x80
-#define SLEEP_SET_RES_OFF_DEFAULT_VOLT_SHIFT		7
-#define SLEEP_SET_RES_OFF_RSVD_MASK			0x60
-#define SLEEP_SET_RES_OFF_RSVD_SHIFT			5
-#define SLEEP_SET_RES_OFF_SPARE_SETOFF_MASK		0x10
-#define SLEEP_SET_RES_OFF_SPARE_SETOFF_SHIFT		4
-#define SLEEP_SET_RES_OFF_VDD3_SETOFF_MASK		0x08
-#define SLEEP_SET_RES_OFF_VDD3_SETOFF_SHIFT		3
-#define SLEEP_SET_RES_OFF_VDD2_SETOFF_MASK		0x04
-#define SLEEP_SET_RES_OFF_VDD2_SETOFF_SHIFT		2
-#define SLEEP_SET_RES_OFF_VDD1_SETOFF_MASK		0x02
-#define SLEEP_SET_RES_OFF_VDD1_SETOFF_SHIFT		1
-#define SLEEP_SET_RES_OFF_VIO_SETOFF_MASK		0x01
-#define SLEEP_SET_RES_OFF_VIO_SETOFF_SHIFT		0
-
-
-/*Register EN1_LDO_ASS	(0x80) register.RegisterDescription */
-#define EN1_LDO_ASS_VDAC_EN1_MASK			0x80
-#define EN1_LDO_ASS_VDAC_EN1_SHIFT			7
-#define EN1_LDO_ASS_VPLL_EN1_MASK			0x40
-#define EN1_LDO_ASS_VPLL_EN1_SHIFT			6
-#define EN1_LDO_ASS_VAUX33_EN1_MASK			0x20
-#define EN1_LDO_ASS_VAUX33_EN1_SHIFT			5
-#define EN1_LDO_ASS_VAUX2_EN1_MASK			0x10
-#define EN1_LDO_ASS_VAUX2_EN1_SHIFT			4
-#define EN1_LDO_ASS_VAUX1_EN1_MASK			0x08
-#define EN1_LDO_ASS_VAUX1_EN1_SHIFT			3
-#define EN1_LDO_ASS_VDIG2_EN1_MASK			0x04
-#define EN1_LDO_ASS_VDIG2_EN1_SHIFT			2
-#define EN1_LDO_ASS_VDIG1_EN1_MASK			0x02
-#define EN1_LDO_ASS_VDIG1_EN1_SHIFT			1
-#define EN1_LDO_ASS_VMMC_EN1_MASK			0x01
-#define EN1_LDO_ASS_VMMC_EN1_SHIFT			0
-
-
-/*Register EN1_SMPS_ASS  (0x80) register.RegisterDescription */
-#define EN1_SMPS_ASS_RSVD_MASK				0xE0
-#define EN1_SMPS_ASS_RSVD_SHIFT				5
-#define EN1_SMPS_ASS_SPARE_EN1_MASK			0x10
-#define EN1_SMPS_ASS_SPARE_EN1_SHIFT			4
-#define EN1_SMPS_ASS_VDD3_EN1_MASK			0x08
-#define EN1_SMPS_ASS_VDD3_EN1_SHIFT			3
-#define EN1_SMPS_ASS_VDD2_EN1_MASK			0x04
-#define EN1_SMPS_ASS_VDD2_EN1_SHIFT			2
-#define EN1_SMPS_ASS_VDD1_EN1_MASK			0x02
-#define EN1_SMPS_ASS_VDD1_EN1_SHIFT			1
-#define EN1_SMPS_ASS_VIO_EN1_MASK			0x01
-#define EN1_SMPS_ASS_VIO_EN1_SHIFT			0
-
-
-/*Register EN2_LDO_ASS	(0x80) register.RegisterDescription */
-#define EN2_LDO_ASS_VDAC_EN2_MASK			0x80
-#define EN2_LDO_ASS_VDAC_EN2_SHIFT			7
-#define EN2_LDO_ASS_VPLL_EN2_MASK			0x40
-#define EN2_LDO_ASS_VPLL_EN2_SHIFT			6
-#define EN2_LDO_ASS_VAUX33_EN2_MASK			0x20
-#define EN2_LDO_ASS_VAUX33_EN2_SHIFT			5
-#define EN2_LDO_ASS_VAUX2_EN2_MASK			0x10
-#define EN2_LDO_ASS_VAUX2_EN2_SHIFT			4
-#define EN2_LDO_ASS_VAUX1_EN2_MASK			0x08
-#define EN2_LDO_ASS_VAUX1_EN2_SHIFT			3
-#define EN2_LDO_ASS_VDIG2_EN2_MASK			0x04
-#define EN2_LDO_ASS_VDIG2_EN2_SHIFT			2
-#define EN2_LDO_ASS_VDIG1_EN2_MASK			0x02
-#define EN2_LDO_ASS_VDIG1_EN2_SHIFT			1
-#define EN2_LDO_ASS_VMMC_EN2_MASK			0x01
-#define EN2_LDO_ASS_VMMC_EN2_SHIFT			0
-
-
-/*Register EN2_SMPS_ASS  (0x80) register.RegisterDescription */
-#define EN2_SMPS_ASS_RSVD_MASK				0xE0
-#define EN2_SMPS_ASS_RSVD_SHIFT				5
-#define EN2_SMPS_ASS_SPARE_EN2_MASK			0x10
-#define EN2_SMPS_ASS_SPARE_EN2_SHIFT			4
-#define EN2_SMPS_ASS_VDD3_EN2_MASK			0x08
-#define EN2_SMPS_ASS_VDD3_EN2_SHIFT			3
-#define EN2_SMPS_ASS_VDD2_EN2_MASK			0x04
-#define EN2_SMPS_ASS_VDD2_EN2_SHIFT			2
-#define EN2_SMPS_ASS_VDD1_EN2_MASK			0x02
-#define EN2_SMPS_ASS_VDD1_EN2_SHIFT			1
-#define EN2_SMPS_ASS_VIO_EN2_MASK			0x01
-#define EN2_SMPS_ASS_VIO_EN2_SHIFT			0
-
-
-/*Register EN3_LDO_ASS	(0x80) register.RegisterDescription */
-#define EN3_LDO_ASS_VDAC_EN3_MASK			0x80
-#define EN3_LDO_ASS_VDAC_EN3_SHIFT			7
-#define EN3_LDO_ASS_VPLL_EN3_MASK			0x40
-#define EN3_LDO_ASS_VPLL_EN3_SHIFT			6
-#define EN3_LDO_ASS_VAUX33_EN3_MASK			0x20
-#define EN3_LDO_ASS_VAUX33_EN3_SHIFT			5
-#define EN3_LDO_ASS_VAUX2_EN3_MASK			0x10
-#define EN3_LDO_ASS_VAUX2_EN3_SHIFT			4
-#define EN3_LDO_ASS_VAUX1_EN3_MASK			0x08
-#define EN3_LDO_ASS_VAUX1_EN3_SHIFT			3
-#define EN3_LDO_ASS_VDIG2_EN3_MASK			0x04
-#define EN3_LDO_ASS_VDIG2_EN3_SHIFT			2
-#define EN3_LDO_ASS_VDIG1_EN3_MASK			0x02
-#define EN3_LDO_ASS_VDIG1_EN3_SHIFT			1
-#define EN3_LDO_ASS_VMMC_EN3_MASK			0x01
-#define EN3_LDO_ASS_VMMC_EN3_SHIFT			0
-
-
-/*Register SPARE  (0x80) register.RegisterDescription */
-#define SPARE_SPARE_MASK				0xFF
-#define SPARE_SPARE_SHIFT				0
-
-
-/*Register INT_STS  (0x80) register.RegisterDescription */
-#define INT_STS_RTC_PERIOD_IT_MASK			0x80
-#define INT_STS_RTC_PERIOD_IT_SHIFT			7
-#define INT_STS_RTC_ALARM_IT_MASK			0x40
-#define INT_STS_RTC_ALARM_IT_SHIFT			6
-#define INT_STS_HOTDIE_IT_MASK				0x20
-#define INT_STS_HOTDIE_IT_SHIFT				5
-#define INT_STS_PWRHOLD_IT_MASK				0x10
-#define INT_STS_PWRHOLD_IT_SHIFT			4
-#define INT_STS_PWRON_LP_IT_MASK			0x08
-#define INT_STS_PWRON_LP_IT_SHIFT			3
-#define INT_STS_PWRON_IT_MASK				0x04
-#define INT_STS_PWRON_IT_SHIFT				2
-#define INT_STS_VMBHI_IT_MASK				0x02
-#define INT_STS_VMBHI_IT_SHIFT				1
-#define INT_STS_VMBDCH_IT_MASK				0x01
-#define INT_STS_VMBDCH_IT_SHIFT				0
-
-
-/*Register INT_MSK  (0x80) register.RegisterDescription */
-#define INT_MSK_RTC_PERIOD_IT_MSK_MASK			0x80
-#define INT_MSK_RTC_PERIOD_IT_MSK_SHIFT			7
-#define INT_MSK_RTC_ALARM_IT_MSK_MASK			0x40
-#define INT_MSK_RTC_ALARM_IT_MSK_SHIFT			6
-#define INT_MSK_HOTDIE_IT_MSK_MASK			0x20
-#define INT_MSK_HOTDIE_IT_MSK_SHIFT			5
-#define INT_MSK_PWRHOLD_IT_MSK_MASK			0x10
-#define INT_MSK_PWRHOLD_IT_MSK_SHIFT			4
-#define INT_MSK_PWRON_LP_IT_MSK_MASK			0x08
-#define INT_MSK_PWRON_LP_IT_MSK_SHIFT			3
-#define INT_MSK_PWRON_IT_MSK_MASK			0x04
-#define INT_MSK_PWRON_IT_MSK_SHIFT			2
-#define INT_MSK_VMBHI_IT_MSK_MASK			0x02
-#define INT_MSK_VMBHI_IT_MSK_SHIFT			1
-#define INT_MSK_VMBDCH_IT_MSK_MASK			0x01
-#define INT_MSK_VMBDCH_IT_MSK_SHIFT			0
-
-
-/*Register INT_STS2  (0x80) register.RegisterDescription */
-#define INT_STS2_GPIO3_F_IT_MASK			0x80
-#define INT_STS2_GPIO3_F_IT_SHIFT			7
-#define INT_STS2_GPIO3_R_IT_MASK			0x40
-#define INT_STS2_GPIO3_R_IT_SHIFT			6
-#define INT_STS2_GPIO2_F_IT_MASK			0x20
-#define INT_STS2_GPIO2_F_IT_SHIFT			5
-#define INT_STS2_GPIO2_R_IT_MASK			0x10
-#define INT_STS2_GPIO2_R_IT_SHIFT			4
-#define INT_STS2_GPIO1_F_IT_MASK			0x08
-#define INT_STS2_GPIO1_F_IT_SHIFT			3
-#define INT_STS2_GPIO1_R_IT_MASK			0x04
-#define INT_STS2_GPIO1_R_IT_SHIFT			2
-#define INT_STS2_GPIO0_F_IT_MASK			0x02
-#define INT_STS2_GPIO0_F_IT_SHIFT			1
-#define INT_STS2_GPIO0_R_IT_MASK			0x01
-#define INT_STS2_GPIO0_R_IT_SHIFT			0
-
-
-/*Register INT_MSK2  (0x80) register.RegisterDescription */
-#define INT_MSK2_GPIO3_F_IT_MSK_MASK			0x80
-#define INT_MSK2_GPIO3_F_IT_MSK_SHIFT			7
-#define INT_MSK2_GPIO3_R_IT_MSK_MASK			0x40
-#define INT_MSK2_GPIO3_R_IT_MSK_SHIFT			6
-#define INT_MSK2_GPIO2_F_IT_MSK_MASK			0x20
-#define INT_MSK2_GPIO2_F_IT_MSK_SHIFT			5
-#define INT_MSK2_GPIO2_R_IT_MSK_MASK			0x10
-#define INT_MSK2_GPIO2_R_IT_MSK_SHIFT			4
-#define INT_MSK2_GPIO1_F_IT_MSK_MASK			0x08
-#define INT_MSK2_GPIO1_F_IT_MSK_SHIFT			3
-#define INT_MSK2_GPIO1_R_IT_MSK_MASK			0x04
-#define INT_MSK2_GPIO1_R_IT_MSK_SHIFT			2
-#define INT_MSK2_GPIO0_F_IT_MSK_MASK			0x02
-#define INT_MSK2_GPIO0_F_IT_MSK_SHIFT			1
-#define INT_MSK2_GPIO0_R_IT_MSK_MASK			0x01
-#define INT_MSK2_GPIO0_R_IT_MSK_SHIFT			0
-
-
-/*Register INT_STS3  (0x80) register.RegisterDescription */
-#define INT_STS3_GPIO5_F_IT_MASK			0x08
-#define INT_STS3_GPIO5_F_IT_SHIFT			3
-#define INT_STS3_GPIO5_R_IT_MASK			0x04
-#define INT_STS3_GPIO5_R_IT_SHIFT			2
-#define INT_STS3_GPIO4_F_IT_MASK			0x02
-#define INT_STS3_GPIO4_F_IT_SHIFT			1
-#define INT_STS3_GPIO4_R_IT_MASK			0x01
-#define INT_STS3_GPIO4_R_IT_SHIFT			0
-
-
-/*Register INT_MSK3  (0x80) register.RegisterDescription */
-#define INT_MSK3_GPIO5_F_IT_MSK_MASK			0x08
-#define INT_MSK3_GPIO5_F_IT_MSK_SHIFT			3
-#define INT_MSK3_GPIO5_R_IT_MSK_MASK			0x04
-#define INT_MSK3_GPIO5_R_IT_MSK_SHIFT			2
-#define INT_MSK3_GPIO4_F_IT_MSK_MASK			0x02
-#define INT_MSK3_GPIO4_F_IT_MSK_SHIFT			1
-#define INT_MSK3_GPIO4_R_IT_MSK_MASK			0x01
-#define INT_MSK3_GPIO4_R_IT_MSK_SHIFT			0
-
-
-/*Register GPIO  (0x80) register.RegisterDescription */
-#define GPIO_SLEEP_MASK                         0x80
-#define GPIO_SLEEP_SHIFT                        7
-#define GPIO_DEB_MASK                           0x10
-#define GPIO_DEB_SHIFT                          4
-#define GPIO_PUEN_MASK                          0x08
-#define GPIO_PUEN_SHIFT                         3
-#define GPIO_CFG_MASK                           0x04
-#define GPIO_CFG_SHIFT                          2
-#define GPIO_STS_MASK                           0x02
-#define GPIO_STS_SHIFT                          1
-#define GPIO_SET_MASK                           0x01
-#define GPIO_SET_SHIFT                          0
-
-
-/*Register JTAGVERNUM  (0x80) register.RegisterDescription */
-#define JTAGVERNUM_VERNUM_MASK				0x0F
-#define JTAGVERNUM_VERNUM_SHIFT				0
-
-
-/* Register VDDCTRL (0x27) bit definitions */
-#define VDDCTRL_ST_MASK                                  0x03
-#define VDDCTRL_ST_SHIFT                                 0
-
-
-/*Register VDDCTRL_OP  (0x28) bit definitios */
-#define VDDCTRL_OP_CMD_MASK                              0x80
-#define VDDCTRL_OP_CMD_SHIFT                             7
-#define VDDCTRL_OP_SEL_MASK                              0x7F
-#define VDDCTRL_OP_SEL_SHIFT                             0
-
-
-/*Register VDDCTRL_SR  (0x29) bit definitions */
-#define VDDCTRL_SR_SEL_MASK                              0x7F
-#define VDDCTRL_SR_SEL_SHIFT                             0
-
-
-/* IRQ Definitions */
-#define TPS65910_IRQ_VBAT_VMBDCH			0
-#define TPS65910_IRQ_VBAT_VMHI				1
-#define TPS65910_IRQ_PWRON				2
-#define TPS65910_IRQ_PWRON_LP				3
-#define TPS65910_IRQ_PWRHOLD				4
-#define TPS65910_IRQ_HOTDIE				5
-#define TPS65910_IRQ_RTC_ALARM				6
-#define TPS65910_IRQ_RTC_PERIOD				7
-#define TPS65910_IRQ_GPIO_R				8
-#define TPS65910_IRQ_GPIO_F				9
-#define TPS65910_NUM_IRQ				10
-
-#define TPS65911_IRQ_VBAT_VMBDCH			0
-#define TPS65911_IRQ_VBAT_VMBDCH2L			1
-#define TPS65911_IRQ_VBAT_VMBDCH2H			2
-#define TPS65911_IRQ_VBAT_VMHI				3
-#define TPS65911_IRQ_PWRON				4
-#define TPS65911_IRQ_PWRON_LP				5
-#define TPS65911_IRQ_PWRHOLD_F				6
-#define TPS65911_IRQ_PWRHOLD_R				7
-#define TPS65911_IRQ_HOTDIE				8
-#define TPS65911_IRQ_RTC_ALARM				9
-#define TPS65911_IRQ_RTC_PERIOD				10
-#define TPS65911_IRQ_GPIO0_R				11
-#define TPS65911_IRQ_GPIO0_F				12
-#define TPS65911_IRQ_GPIO1_R				13
-#define TPS65911_IRQ_GPIO1_F				14
-#define TPS65911_IRQ_GPIO2_R				15
-#define TPS65911_IRQ_GPIO2_F				16
-#define TPS65911_IRQ_GPIO3_R				17
-#define TPS65911_IRQ_GPIO3_F				18
-#define TPS65911_IRQ_GPIO4_R				19
-#define TPS65911_IRQ_GPIO4_F				20
-#define TPS65911_IRQ_GPIO5_R				21
-#define TPS65911_IRQ_GPIO5_F				22
-#define TPS65911_IRQ_WTCHDG				23
-#define TPS65911_IRQ_PWRDN				24
-
-#define TPS65911_NUM_IRQ				25
-
-
-/* GPIO Register Definitions */
-#define TPS65910_GPIO_DEB				BIT(2)
-#define TPS65910_GPIO_PUEN				BIT(3)
-#define TPS65910_GPIO_CFG				BIT(2)
-#define TPS65910_GPIO_STS				BIT(1)
-#define TPS65910_GPIO_SET				BIT(0)
-
-/* Max number of TPS65910/11 GPIOs */
-#define TPS65910_NUM_GPIO				6
-#define TPS65911_NUM_GPIO				9
-#define TPS6591X_MAX_NUM_GPIO				9
-
-/* Regulator Index Definitions */
-#define TPS65910_REG_VRTC				0
-#define TPS65910_REG_VIO				1
-#define TPS65910_REG_VDD1				2
-#define TPS65910_REG_VDD2				3
-#define TPS65910_REG_VDD3				4
-#define TPS65910_REG_VDIG1				5
-#define TPS65910_REG_VDIG2				6
-#define TPS65910_REG_VPLL				7
-#define TPS65910_REG_VDAC				8
-#define TPS65910_REG_VAUX1				9
-#define TPS65910_REG_VAUX2				10
-#define TPS65910_REG_VAUX33				11
-#define TPS65910_REG_VMMC				12
-
-#define TPS65911_REG_VDDCTRL				4
-#define TPS65911_REG_LDO1				5
-#define TPS65911_REG_LDO2				6
-#define TPS65911_REG_LDO3				7
-#define TPS65911_REG_LDO4				8
-#define TPS65911_REG_LDO5				9
-#define TPS65911_REG_LDO6				10
-#define TPS65911_REG_LDO7				11
-#define TPS65911_REG_LDO8				12
-
-/* Max number of TPS65910/11 regulators */
-#define TPS65910_NUM_REGS				13
-
-/* External sleep controls through EN1/EN2/EN3/SLEEP inputs */
-#define TPS65910_SLEEP_CONTROL_EXT_INPUT_EN1		0x1
-#define TPS65910_SLEEP_CONTROL_EXT_INPUT_EN2		0x2
-#define TPS65910_SLEEP_CONTROL_EXT_INPUT_EN3		0x4
-#define TPS65911_SLEEP_CONTROL_EXT_INPUT_SLEEP		0x8
-
-/**
- * struct tps65910_board
- * Board platform data may be used to initialize regulators.
- */
-
-struct tps65910_board {
-	int gpio_base;
-	int irq;
-	int irq_base;
-	int vmbch_threshold;
-	int vmbch2_threshold;
-	bool en_gpio_sleep[TPS6591X_MAX_NUM_GPIO];
-	unsigned long regulator_ext_sleep_control[TPS65910_NUM_REGS];
-	struct regulator_init_data *tps65910_pmic_init_data[TPS65910_NUM_REGS];
-};
-
-/**
- * struct tps65910 - tps65910 sub-driver chip access routines
- */
-
-struct tps65910 {
-	struct device *dev;
-	struct i2c_client *i2c_client;
-	struct regmap *regmap;
-	struct mutex io_mutex;
-	unsigned int id;
-	int (*read)(struct tps65910 *tps65910, u8 reg, int size, void *dest);
-	int (*write)(struct tps65910 *tps65910, u8 reg, int size, void *src);
-
-	/* Client devices */
-	struct tps65910_pmic *pmic;
-	struct tps65910_rtc *rtc;
-	struct tps65910_power *power;
-
-	/* GPIO Handling */
-	struct gpio_chip gpio;
-
-	/* IRQ Handling */
-	struct mutex irq_lock;
-	int chip_irq;
-	int irq_base;
-	int irq_num;
-	u32 irq_mask;
-};
-
-struct tps65910_platform_data {
-	int irq;
-	int irq_base;
-};
-
-int tps65910_set_bits(struct tps65910 *tps65910, u8 reg, u8 mask);
-int tps65910_clear_bits(struct tps65910 *tps65910, u8 reg, u8 mask);
-void tps65910_gpio_init(struct tps65910 *tps65910, int gpio_base);
-int tps65910_irq_init(struct tps65910 *tps65910, int irq,
-		struct tps65910_platform_data *pdata);
-int tps65910_irq_exit(struct tps65910 *tps65910);
-
-static inline int tps65910_chip_id(struct tps65910 *tps65910)
-{
-	return tps65910->id;
-}
-
-#endif /*  __LINUX_MFD_TPS65910_H */
diff --git a/ANDROID_3.4.5/include/linux/mfd/tps65912.h b/ANDROID_3.4.5/include/linux/mfd/tps65912.h
deleted file mode 100644
index aaceab40..00000000
--- a/ANDROID_3.4.5/include/linux/mfd/tps65912.h
+++ /dev/null
@@ -1,327 +0,0 @@
-/*
- * tps65912.h  --  TI TPS6591x
- *
- * Copyright 2011 Texas Instruments Inc.
- *
- * Author: Margarita Olaya <magi@slimlogic.co.uk>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under  the terms of the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the License, or (at your
- *  option) any later version.
- *
- */
-
-#ifndef __LINUX_MFD_TPS65912_H
-#define __LINUX_MFD_TPS65912_H
-
-/* TPS regulator type list */
-#define REGULATOR_LDO		0
-#define REGULATOR_DCDC		1
-
-/*
- * List of registers for TPS65912
- */
-
-#define TPS65912_DCDC1_CTRL		0x00
-#define TPS65912_DCDC2_CTRL		0x01
-#define TPS65912_DCDC3_CTRL		0x02
-#define TPS65912_DCDC4_CTRL		0x03
-#define TPS65912_DCDC1_OP		0x04
-#define TPS65912_DCDC1_AVS		0x05
-#define TPS65912_DCDC1_LIMIT		0x06
-#define TPS65912_DCDC2_OP		0x07
-#define TPS65912_DCDC2_AVS		0x08
-#define TPS65912_DCDC2_LIMIT		0x09
-#define TPS65912_DCDC3_OP		0x0A
-#define TPS65912_DCDC3_AVS		0x0B
-#define TPS65912_DCDC3_LIMIT		0x0C
-#define TPS65912_DCDC4_OP		0x0D
-#define TPS65912_DCDC4_AVS		0x0E
-#define TPS65912_DCDC4_LIMIT		0x0F
-#define TPS65912_LDO1_OP		0x10
-#define TPS65912_LDO1_AVS		0x11
-#define TPS65912_LDO1_LIMIT		0x12
-#define TPS65912_LDO2_OP		0x13
-#define TPS65912_LDO2_AVS		0x14
-#define TPS65912_LDO2_LIMIT		0x15
-#define TPS65912_LDO3_OP		0x16
-#define TPS65912_LDO3_AVS		0x17
-#define TPS65912_LDO3_LIMIT		0x18
-#define TPS65912_LDO4_OP		0x19
-#define TPS65912_LDO4_AVS		0x1A
-#define TPS65912_LDO4_LIMIT		0x1B
-#define TPS65912_LDO5			0x1C
-#define TPS65912_LDO6			0x1D
-#define TPS65912_LDO7			0x1E
-#define TPS65912_LDO8			0x1F
-#define TPS65912_LDO9			0x20
-#define TPS65912_LDO10			0x21
-#define TPS65912_THRM			0x22
-#define TPS65912_CLK32OUT		0x23
-#define TPS65912_DEVCTRL		0x24
-#define TPS65912_DEVCTRL2		0x25
-#define TPS65912_I2C_SPI_CFG		0x26
-#define TPS65912_KEEP_ON		0x27
-#define TPS65912_KEEP_ON2		0x28
-#define TPS65912_SET_OFF1		0x29
-#define TPS65912_SET_OFF2		0x2A
-#define TPS65912_DEF_VOLT		0x2B
-#define TPS65912_DEF_VOLT_MAPPING	0x2C
-#define TPS65912_DISCHARGE		0x2D
-#define TPS65912_DISCHARGE2		0x2E
-#define TPS65912_EN1_SET1		0x2F
-#define TPS65912_EN1_SET2		0x30
-#define TPS65912_EN2_SET1		0x31
-#define TPS65912_EN2_SET2		0x32
-#define TPS65912_EN3_SET1		0x33
-#define TPS65912_EN3_SET2		0x34
-#define TPS65912_EN4_SET1		0x35
-#define TPS65912_EN4_SET2		0x36
-#define TPS65912_PGOOD			0x37
-#define TPS65912_PGOOD2			0x38
-#define TPS65912_INT_STS		0x39
-#define TPS65912_INT_MSK		0x3A
-#define TPS65912_INT_STS2		0x3B
-#define TPS65912_INT_MSK2		0x3C
-#define TPS65912_INT_STS3		0x3D
-#define TPS65912_INT_MSK3		0x3E
-#define TPS65912_INT_STS4		0x3F
-#define TPS65912_INT_MSK4		0x40
-#define TPS65912_GPIO1			0x41
-#define TPS65912_GPIO2			0x42
-#define TPS65912_GPIO3			0x43
-#define TPS65912_GPIO4			0x44
-#define TPS65912_GPIO5			0x45
-#define TPS65912_VMON			0x46
-#define TPS65912_LEDA_CTRL1		0x47
-#define TPS65912_LEDA_CTRL2		0x48
-#define TPS65912_LEDA_CTRL3		0x49
-#define TPS65912_LEDA_CTRL4		0x4A
-#define TPS65912_LEDA_CTRL5		0x4B
-#define TPS65912_LEDA_CTRL6		0x4C
-#define TPS65912_LEDA_CTRL7		0x4D
-#define TPS65912_LEDA_CTRL8		0x4E
-#define TPS65912_LEDB_CTRL1		0x4F
-#define TPS65912_LEDB_CTRL2		0x50
-#define TPS65912_LEDB_CTRL3		0x51
-#define TPS65912_LEDB_CTRL4		0x52
-#define TPS65912_LEDB_CTRL5		0x53
-#define TPS65912_LEDB_CTRL6		0x54
-#define TPS65912_LEDB_CTRL7		0x55
-#define TPS65912_LEDB_CTRL8		0x56
-#define TPS65912_LEDC_CTRL1		0x57
-#define TPS65912_LEDC_CTRL2		0x58
-#define TPS65912_LEDC_CTRL3		0x59
-#define TPS65912_LEDC_CTRL4		0x5A
-#define TPS65912_LEDC_CTRL5		0x5B
-#define TPS65912_LEDC_CTRL6		0x5C
-#define TPS65912_LEDC_CTRL7		0x5D
-#define TPS65912_LEDC_CTRL8		0x5E
-#define TPS65912_LED_RAMP_UP_TIME	0x5F
-#define TPS65912_LED_RAMP_DOWN_TIME	0x60
-#define TPS65912_LED_SEQ_EN		0x61
-#define TPS65912_LOADSWITCH		0x62
-#define TPS65912_SPARE			0x63
-#define TPS65912_VERNUM			0x64
-#define TPS6591X_MAX_REGISTER		0x64
-
-/* IRQ Definitions */
-#define TPS65912_IRQ_PWRHOLD_F		0
-#define TPS65912_IRQ_VMON		1
-#define TPS65912_IRQ_PWRON		2
-#define TPS65912_IRQ_PWRON_LP		3
-#define TPS65912_IRQ_PWRHOLD_R		4
-#define TPS65912_IRQ_HOTDIE		5
-#define TPS65912_IRQ_GPIO1_R		6
-#define TPS65912_IRQ_GPIO1_F		7
-#define TPS65912_IRQ_GPIO2_R		8
-#define TPS65912_IRQ_GPIO2_F		9
-#define TPS65912_IRQ_GPIO3_R		10
-#define TPS65912_IRQ_GPIO3_F		11
-#define TPS65912_IRQ_GPIO4_R		12
-#define TPS65912_IRQ_GPIO4_F		13
-#define TPS65912_IRQ_GPIO5_R		14
-#define TPS65912_IRQ_GPIO5_F		15
-#define TPS65912_IRQ_PGOOD_DCDC1	16
-#define TPS65912_IRQ_PGOOD_DCDC2	17
-#define TPS65912_IRQ_PGOOD_DCDC3	18
-#define TPS65912_IRQ_PGOOD_DCDC4	19
-#define TPS65912_IRQ_PGOOD_LDO1		20
-#define TPS65912_IRQ_PGOOD_LDO2		21
-#define TPS65912_IRQ_PGOOD_LDO3		22
-#define TPS65912_IRQ_PGOOD_LDO4		23
-#define TPS65912_IRQ_PGOOD_LDO5		24
-#define TPS65912_IRQ_PGOOD_LDO6		25
-#define TPS65912_IRQ_PGOOD_LDO7		26
-#define TPS65912_IRQ_PGOOD_LD08		27
-#define TPS65912_IRQ_PGOOD_LDO9		28
-#define TPS65912_IRQ_PGOOD_LDO10	29
-
-#define TPS65912_NUM_IRQ		30
-
-/* GPIO 1 and 2 Register Definitions */
-#define GPIO_SLEEP_MASK			0x80
-#define GPIO_SLEEP_SHIFT		7
-#define GPIO_DEB_MASK			0x10
-#define GPIO_DEB_SHIFT			4
-#define GPIO_CFG_MASK			0x04
-#define GPIO_CFG_SHIFT			2
-#define GPIO_STS_MASK			0x02
-#define GPIO_STS_SHIFT			1
-#define GPIO_SET_MASK			0x01
-#define GPIO_SET_SHIFT			0
-
-/* GPIO 3 Register Definitions */
-#define GPIO3_SLEEP_MASK		0x80
-#define GPIO3_SLEEP_SHIFT		7
-#define GPIO3_SEL_MASK			0x40
-#define GPIO3_SEL_SHIFT			6
-#define GPIO3_ODEN_MASK			0x20
-#define GPIO3_ODEN_SHIFT		5
-#define GPIO3_DEB_MASK			0x10
-#define GPIO3_DEB_SHIFT			4
-#define GPIO3_PDEN_MASK			0x08
-#define GPIO3_PDEN_SHIFT		3
-#define GPIO3_CFG_MASK			0x04
-#define GPIO3_CFG_SHIFT			2
-#define GPIO3_STS_MASK			0x02
-#define GPIO3_STS_SHIFT			1
-#define GPIO3_SET_MASK			0x01
-#define GPIO3_SET_SHIFT			0
-
-/* GPIO 4 Register Definitions */
-#define GPIO4_SLEEP_MASK		0x80
-#define GPIO4_SLEEP_SHIFT		7
-#define GPIO4_SEL_MASK			0x40
-#define GPIO4_SEL_SHIFT			6
-#define GPIO4_ODEN_MASK			0x20
-#define GPIO4_ODEN_SHIFT		5
-#define GPIO4_DEB_MASK			0x10
-#define GPIO4_DEB_SHIFT			4
-#define GPIO4_PDEN_MASK			0x08
-#define GPIO4_PDEN_SHIFT		3
-#define GPIO4_CFG_MASK			0x04
-#define GPIO4_CFG_SHIFT			2
-#define GPIO4_STS_MASK			0x02
-#define GPIO4_STS_SHIFT			1
-#define GPIO4_SET_MASK			0x01
-#define GPIO4_SET_SHIFT			0
-
-/* Register THERM  (0x80) register.RegisterDescription */
-#define THERM_THERM_HD_MASK		0x20
-#define THERM_THERM_HD_SHIFT		5
-#define THERM_THERM_TS_MASK		0x10
-#define THERM_THERM_TS_SHIFT		4
-#define THERM_THERM_HDSEL_MASK		0x0C
-#define THERM_THERM_HDSEL_SHIFT		2
-#define THERM_RSVD1_MASK		0x02
-#define THERM_RSVD1_SHIFT		1
-#define THERM_THERM_STATE_MASK		0x01
-#define THERM_THERM_STATE_SHIFT		0
-
-/* Register DCDCCTRL1 register.RegisterDescription */
-#define DCDCCTRL_VCON_ENABLE_MASK	0x80
-#define DCDCCTRL_VCON_ENABLE_SHIFT	7
-#define DCDCCTRL_VCON_RANGE1_MASK	0x40
-#define DCDCCTRL_VCON_RANGE1_SHIFT	6
-#define DCDCCTRL_VCON_RANGE0_MASK	0x20
-#define DCDCCTRL_VCON_RANGE0_SHIFT	5
-#define DCDCCTRL_TSTEP2_MASK		0x10
-#define DCDCCTRL_TSTEP2_SHIFT		4
-#define DCDCCTRL_TSTEP1_MASK		0x08
-#define DCDCCTRL_TSTEP1_SHIFT		3
-#define DCDCCTRL_TSTEP0_MASK		0x04
-#define DCDCCTRL_TSTEP0_SHIFT		2
-#define DCDCCTRL_DCDC1_MODE_MASK	0x02
-#define DCDCCTRL_DCDC1_MODE_SHIFT	1
-
-/* Register DCDCCTRL2 and DCDCCTRL3 register.RegisterDescription */
-#define DCDCCTRL_TSTEP2_MASK		0x10
-#define DCDCCTRL_TSTEP2_SHIFT		4
-#define DCDCCTRL_TSTEP1_MASK		0x08
-#define DCDCCTRL_TSTEP1_SHIFT		3
-#define DCDCCTRL_TSTEP0_MASK		0x04
-#define DCDCCTRL_TSTEP0_SHIFT		2
-#define DCDCCTRL_DCDC_MODE_MASK		0x02
-#define DCDCCTRL_DCDC_MODE_SHIFT	1
-#define DCDCCTRL_RSVD0_MASK		0x01
-#define DCDCCTRL_RSVD0_SHIFT		0
-
-/* Register DCDCCTRL4 register.RegisterDescription */
-#define DCDCCTRL_RAMP_TIME_MASK		0x01
-#define DCDCCTRL_RAMP_TIME_SHIFT	0
-
-/* Register DCDCx_AVS */
-#define DCDC_AVS_ENABLE_MASK		0x80
-#define DCDC_AVS_ENABLE_SHIFT		7
-#define DCDC_AVS_ECO_MASK		0x40
-#define DCDC_AVS_ECO_SHIFT		6
-
-/* Register DCDCx_LIMIT */
-#define DCDC_LIMIT_RANGE_MASK		0xC0
-#define DCDC_LIMIT_RANGE_SHIFT		6
-#define DCDC_LIMIT_MAX_SEL_MASK		0x3F
-#define DCDC_LIMIT_MAX_SEL_SHIFT	0
-
-/**
- * struct tps65912_board
- * Board platform dat may be used to initialize regulators.
- */
-struct tps65912_board {
-	int is_dcdc1_avs;
-	int is_dcdc2_avs;
-	int is_dcdc3_avs;
-	int is_dcdc4_avs;
-	int irq;
-	int irq_base;
-	int gpio_base;
-	struct regulator_init_data *tps65912_pmic_init_data;
-};
-
-/**
- * struct tps65912 - tps65912 sub-driver chip access routines
- */
-
-struct tps65912 {
-	struct device *dev;
-	/* for read/write acces */
-	struct mutex io_mutex;
-
-	/* For device IO interfaces: I2C or SPI */
-	void *control_data;
-
-	int (*read)(struct tps65912 *tps65912, u8 reg, int size, void *dest);
-	int (*write)(struct tps65912 *tps65912, u8 reg, int size, void *src);
-
-	/* Client devices */
-	struct tps65912_pmic *pmic;
-
-	/* GPIO Handling */
-	struct gpio_chip gpio;
-
-	/* IRQ Handling */
-	struct mutex irq_lock;
-	int chip_irq;
-	int irq_base;
-	int irq_num;
-	u32 irq_mask;
-};
-
-struct tps65912_platform_data {
-	int irq;
-	int irq_base;
-};
-
-unsigned int tps_chip(void);
-
-int tps65912_set_bits(struct tps65912 *tps65912, u8 reg, u8 mask);
-int tps65912_clear_bits(struct tps65912 *tps65912, u8 reg, u8 mask);
-int tps65912_reg_read(struct tps65912 *tps65912, u8 reg);
-int tps65912_reg_write(struct tps65912 *tps65912, u8 reg, u8 val);
-int tps65912_device_init(struct tps65912 *tps65912);
-void tps65912_device_exit(struct tps65912 *tps65912);
-int tps65912_irq_init(struct tps65912 *tps65912, int irq,
-			struct tps65912_platform_data *pdata);
-
-#endif /*  __LINUX_MFD_TPS65912_H */
diff --git a/ANDROID_3.4.5/include/linux/mfd/twl4030-audio.h b/ANDROID_3.4.5/include/linux/mfd/twl4030-audio.h
deleted file mode 100644
index 3d22b72d..00000000
--- a/ANDROID_3.4.5/include/linux/mfd/twl4030-audio.h
+++ /dev/null
@@ -1,272 +0,0 @@
-/*
- * MFD driver for twl4030 audio submodule
- *
- * Author: Peter Ujfalusi <peter.ujfalusi@ti.com>
- *
- * Copyright:   (C) 2009 Nokia Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- */
-
-#ifndef __TWL4030_CODEC_H__
-#define __TWL4030_CODEC_H__
-
-/* Codec registers */
-#define TWL4030_REG_CODEC_MODE		0x01
-#define TWL4030_REG_OPTION		0x02
-#define TWL4030_REG_UNKNOWN		0x03
-#define TWL4030_REG_MICBIAS_CTL		0x04
-#define TWL4030_REG_ANAMICL		0x05
-#define TWL4030_REG_ANAMICR		0x06
-#define TWL4030_REG_AVADC_CTL		0x07
-#define TWL4030_REG_ADCMICSEL		0x08
-#define TWL4030_REG_DIGMIXING		0x09
-#define TWL4030_REG_ATXL1PGA		0x0A
-#define TWL4030_REG_ATXR1PGA		0x0B
-#define TWL4030_REG_AVTXL2PGA		0x0C
-#define TWL4030_REG_AVTXR2PGA		0x0D
-#define TWL4030_REG_AUDIO_IF		0x0E
-#define TWL4030_REG_VOICE_IF		0x0F
-#define TWL4030_REG_ARXR1PGA		0x10
-#define TWL4030_REG_ARXL1PGA		0x11
-#define TWL4030_REG_ARXR2PGA		0x12
-#define TWL4030_REG_ARXL2PGA		0x13
-#define TWL4030_REG_VRXPGA		0x14
-#define TWL4030_REG_VSTPGA		0x15
-#define TWL4030_REG_VRX2ARXPGA		0x16
-#define TWL4030_REG_AVDAC_CTL		0x17
-#define TWL4030_REG_ARX2VTXPGA		0x18
-#define TWL4030_REG_ARXL1_APGA_CTL	0x19
-#define TWL4030_REG_ARXR1_APGA_CTL	0x1A
-#define TWL4030_REG_ARXL2_APGA_CTL	0x1B
-#define TWL4030_REG_ARXR2_APGA_CTL	0x1C
-#define TWL4030_REG_ATX2ARXPGA		0x1D
-#define TWL4030_REG_BT_IF		0x1E
-#define TWL4030_REG_BTPGA		0x1F
-#define TWL4030_REG_BTSTPGA		0x20
-#define TWL4030_REG_EAR_CTL		0x21
-#define TWL4030_REG_HS_SEL		0x22
-#define TWL4030_REG_HS_GAIN_SET		0x23
-#define TWL4030_REG_HS_POPN_SET		0x24
-#define TWL4030_REG_PREDL_CTL		0x25
-#define TWL4030_REG_PREDR_CTL		0x26
-#define TWL4030_REG_PRECKL_CTL		0x27
-#define TWL4030_REG_PRECKR_CTL		0x28
-#define TWL4030_REG_HFL_CTL		0x29
-#define TWL4030_REG_HFR_CTL		0x2A
-#define TWL4030_REG_ALC_CTL		0x2B
-#define TWL4030_REG_ALC_SET1		0x2C
-#define TWL4030_REG_ALC_SET2		0x2D
-#define TWL4030_REG_BOOST_CTL		0x2E
-#define TWL4030_REG_SOFTVOL_CTL		0x2F
-#define TWL4030_REG_DTMF_FREQSEL	0x30
-#define TWL4030_REG_DTMF_TONEXT1H	0x31
-#define TWL4030_REG_DTMF_TONEXT1L	0x32
-#define TWL4030_REG_DTMF_TONEXT2H	0x33
-#define TWL4030_REG_DTMF_TONEXT2L	0x34
-#define TWL4030_REG_DTMF_TONOFF		0x35
-#define TWL4030_REG_DTMF_WANONOFF	0x36
-#define TWL4030_REG_I2S_RX_SCRAMBLE_H	0x37
-#define TWL4030_REG_I2S_RX_SCRAMBLE_M	0x38
-#define TWL4030_REG_I2S_RX_SCRAMBLE_L	0x39
-#define TWL4030_REG_APLL_CTL		0x3A
-#define TWL4030_REG_DTMF_CTL		0x3B
-#define TWL4030_REG_DTMF_PGA_CTL2	0x3C
-#define TWL4030_REG_DTMF_PGA_CTL1	0x3D
-#define TWL4030_REG_MISC_SET_1		0x3E
-#define TWL4030_REG_PCMBTMUX		0x3F
-#define TWL4030_REG_RX_PATH_SEL		0x43
-#define TWL4030_REG_VDL_APGA_CTL	0x44
-#define TWL4030_REG_VIBRA_CTL		0x45
-#define TWL4030_REG_VIBRA_SET		0x46
-#define TWL4030_REG_VIBRA_PWM_SET	0x47
-#define TWL4030_REG_ANAMIC_GAIN		0x48
-#define TWL4030_REG_MISC_SET_2		0x49
-
-/* Bitfield Definitions */
-
-/* TWL4030_CODEC_MODE (0x01) Fields */
-#define TWL4030_APLL_RATE		0xF0
-#define TWL4030_APLL_RATE_8000		0x00
-#define TWL4030_APLL_RATE_11025		0x10
-#define TWL4030_APLL_RATE_12000		0x20
-#define TWL4030_APLL_RATE_16000		0x40
-#define TWL4030_APLL_RATE_22050		0x50
-#define TWL4030_APLL_RATE_24000		0x60
-#define TWL4030_APLL_RATE_32000		0x80
-#define TWL4030_APLL_RATE_44100		0x90
-#define TWL4030_APLL_RATE_48000		0xA0
-#define TWL4030_APLL_RATE_96000		0xE0
-#define TWL4030_SEL_16K			0x08
-#define TWL4030_CODECPDZ		0x02
-#define TWL4030_OPT_MODE		0x01
-#define TWL4030_OPTION_1		(1 << 0)
-#define TWL4030_OPTION_2		(0 << 0)
-
-/* TWL4030_OPTION (0x02) Fields */
-#define TWL4030_ATXL1_EN		(1 << 0)
-#define TWL4030_ATXR1_EN		(1 << 1)
-#define TWL4030_ATXL2_VTXL_EN		(1 << 2)
-#define TWL4030_ATXR2_VTXR_EN		(1 << 3)
-#define TWL4030_ARXL1_VRX_EN		(1 << 4)
-#define TWL4030_ARXR1_EN		(1 << 5)
-#define TWL4030_ARXL2_EN		(1 << 6)
-#define TWL4030_ARXR2_EN		(1 << 7)
-
-/* TWL4030_REG_MICBIAS_CTL (0x04) Fields */
-#define TWL4030_MICBIAS2_CTL		0x40
-#define TWL4030_MICBIAS1_CTL		0x20
-#define TWL4030_HSMICBIAS_EN		0x04
-#define TWL4030_MICBIAS2_EN		0x02
-#define TWL4030_MICBIAS1_EN		0x01
-
-/* ANAMICL (0x05) Fields */
-#define TWL4030_CNCL_OFFSET_START	0x80
-#define TWL4030_OFFSET_CNCL_SEL		0x60
-#define TWL4030_OFFSET_CNCL_SEL_ARX1	0x00
-#define TWL4030_OFFSET_CNCL_SEL_ARX2	0x20
-#define TWL4030_OFFSET_CNCL_SEL_VRX	0x40
-#define TWL4030_OFFSET_CNCL_SEL_ALL	0x60
-#define TWL4030_MICAMPL_EN		0x10
-#define TWL4030_CKMIC_EN		0x08
-#define TWL4030_AUXL_EN			0x04
-#define TWL4030_HSMIC_EN		0x02
-#define TWL4030_MAINMIC_EN		0x01
-
-/* ANAMICR (0x06) Fields */
-#define TWL4030_MICAMPR_EN		0x10
-#define TWL4030_AUXR_EN			0x04
-#define TWL4030_SUBMIC_EN		0x01
-
-/* AVADC_CTL (0x07) Fields */
-#define TWL4030_ADCL_EN			0x08
-#define TWL4030_AVADC_CLK_PRIORITY	0x04
-#define TWL4030_ADCR_EN			0x02
-
-/* TWL4030_REG_ADCMICSEL (0x08) Fields */
-#define TWL4030_DIGMIC1_EN		0x08
-#define TWL4030_TX2IN_SEL		0x04
-#define TWL4030_DIGMIC0_EN		0x02
-#define TWL4030_TX1IN_SEL		0x01
-
-/* AUDIO_IF (0x0E) Fields */
-#define TWL4030_AIF_SLAVE_EN		0x80
-#define TWL4030_DATA_WIDTH		0x60
-#define TWL4030_DATA_WIDTH_16S_16W	0x00
-#define TWL4030_DATA_WIDTH_32S_16W	0x40
-#define TWL4030_DATA_WIDTH_32S_24W	0x60
-#define TWL4030_AIF_FORMAT		0x18
-#define TWL4030_AIF_FORMAT_CODEC	0x00
-#define TWL4030_AIF_FORMAT_LEFT		0x08
-#define TWL4030_AIF_FORMAT_RIGHT	0x10
-#define TWL4030_AIF_FORMAT_TDM		0x18
-#define TWL4030_AIF_TRI_EN		0x04
-#define TWL4030_CLK256FS_EN		0x02
-#define TWL4030_AIF_EN			0x01
-
-/* VOICE_IF (0x0F) Fields */
-#define TWL4030_VIF_SLAVE_EN		0x80
-#define TWL4030_VIF_DIN_EN		0x40
-#define TWL4030_VIF_DOUT_EN		0x20
-#define TWL4030_VIF_SWAP		0x10
-#define TWL4030_VIF_FORMAT		0x08
-#define TWL4030_VIF_TRI_EN		0x04
-#define TWL4030_VIF_SUB_EN		0x02
-#define TWL4030_VIF_EN			0x01
-
-/* EAR_CTL (0x21) */
-#define TWL4030_EAR_GAIN		0x30
-
-/* HS_GAIN_SET (0x23) Fields */
-#define TWL4030_HSR_GAIN		0x0C
-#define TWL4030_HSR_GAIN_PWR_DOWN	0x00
-#define TWL4030_HSR_GAIN_PLUS_6DB	0x04
-#define TWL4030_HSR_GAIN_0DB		0x08
-#define TWL4030_HSR_GAIN_MINUS_6DB	0x0C
-#define TWL4030_HSL_GAIN		0x03
-#define TWL4030_HSL_GAIN_PWR_DOWN	0x00
-#define TWL4030_HSL_GAIN_PLUS_6DB	0x01
-#define TWL4030_HSL_GAIN_0DB		0x02
-#define TWL4030_HSL_GAIN_MINUS_6DB	0x03
-
-/* HS_POPN_SET (0x24) Fields */
-#define TWL4030_VMID_EN			0x40
-#define	TWL4030_EXTMUTE			0x20
-#define TWL4030_RAMP_DELAY		0x1C
-#define TWL4030_RAMP_DELAY_20MS		0x00
-#define TWL4030_RAMP_DELAY_40MS		0x04
-#define TWL4030_RAMP_DELAY_81MS		0x08
-#define TWL4030_RAMP_DELAY_161MS	0x0C
-#define TWL4030_RAMP_DELAY_323MS	0x10
-#define TWL4030_RAMP_DELAY_645MS	0x14
-#define TWL4030_RAMP_DELAY_1291MS	0x18
-#define TWL4030_RAMP_DELAY_2581MS	0x1C
-#define TWL4030_RAMP_EN			0x02
-
-/* PREDL_CTL (0x25) */
-#define TWL4030_PREDL_GAIN		0x30
-
-/* PREDR_CTL (0x26) */
-#define TWL4030_PREDR_GAIN		0x30
-
-/* PRECKL_CTL (0x27) */
-#define TWL4030_PRECKL_GAIN		0x30
-
-/* PRECKR_CTL (0x28) */
-#define TWL4030_PRECKR_GAIN		0x30
-
-/* HFL_CTL (0x29, 0x2A) Fields */
-#define TWL4030_HF_CTL_HB_EN		0x04
-#define TWL4030_HF_CTL_LOOP_EN		0x08
-#define TWL4030_HF_CTL_RAMP_EN		0x10
-#define TWL4030_HF_CTL_REF_EN		0x20
-
-/* APLL_CTL (0x3A) Fields */
-#define TWL4030_APLL_EN			0x10
-#define TWL4030_APLL_INFREQ		0x0F
-#define TWL4030_APLL_INFREQ_19200KHZ	0x05
-#define TWL4030_APLL_INFREQ_26000KHZ	0x06
-#define TWL4030_APLL_INFREQ_38400KHZ	0x0F
-
-/* REG_MISC_SET_1 (0x3E) Fields */
-#define TWL4030_CLK64_EN		0x80
-#define TWL4030_SCRAMBLE_EN		0x40
-#define TWL4030_FMLOOP_EN		0x20
-#define TWL4030_SMOOTH_ANAVOL_EN	0x02
-#define TWL4030_DIGMIC_LR_SWAP_EN	0x01
-
-/* VIBRA_CTL (0x45) */
-#define TWL4030_VIBRA_EN		0x01
-#define TWL4030_VIBRA_DIR		0x02
-#define TWL4030_VIBRA_AUDIO_SEL_L1	(0x00 << 2)
-#define TWL4030_VIBRA_AUDIO_SEL_R1	(0x01 << 2)
-#define TWL4030_VIBRA_AUDIO_SEL_L2	(0x02 << 2)
-#define TWL4030_VIBRA_AUDIO_SEL_R2	(0x03 << 2)
-#define TWL4030_VIBRA_SEL		0x10
-#define TWL4030_VIBRA_DIR_SEL		0x20
-
-/* TWL4030 codec resource IDs */
-enum twl4030_audio_res {
-	TWL4030_AUDIO_RES_POWER = 0,
-	TWL4030_AUDIO_RES_APLL,
-	TWL4030_AUDIO_RES_MAX,
-};
-
-int twl4030_audio_disable_resource(enum twl4030_audio_res id);
-int twl4030_audio_enable_resource(enum twl4030_audio_res id);
-unsigned int twl4030_audio_get_mclk(void);
-
-#endif	/* End of __TWL4030_CODEC_H__ */
diff --git a/ANDROID_3.4.5/include/linux/mfd/twl6040.h b/ANDROID_3.4.5/include/linux/mfd/twl6040.h
deleted file mode 100644
index b15b5f03..00000000
--- a/ANDROID_3.4.5/include/linux/mfd/twl6040.h
+++ /dev/null
@@ -1,251 +0,0 @@
-/*
- * MFD driver for twl6040
- *
- * Authors:     Jorge Eduardo Candelaria <jorge.candelaria@ti.com>
- *              Misael Lopez Cruz <misael.lopez@ti.com>
- *
- * Copyright:   (C) 2011 Texas Instruments, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- */
-
-#ifndef __TWL6040_CODEC_H__
-#define __TWL6040_CODEC_H__
-
-#include <linux/interrupt.h>
-#include <linux/mfd/core.h>
-
-#define TWL6040_REG_ASICID		0x01
-#define TWL6040_REG_ASICREV		0x02
-#define TWL6040_REG_INTID		0x03
-#define TWL6040_REG_INTMR		0x04
-#define TWL6040_REG_NCPCTL		0x05
-#define TWL6040_REG_LDOCTL		0x06
-#define TWL6040_REG_HPPLLCTL		0x07
-#define TWL6040_REG_LPPLLCTL		0x08
-#define TWL6040_REG_LPPLLDIV		0x09
-#define TWL6040_REG_AMICBCTL		0x0A
-#define TWL6040_REG_DMICBCTL		0x0B
-#define TWL6040_REG_MICLCTL		0x0C
-#define TWL6040_REG_MICRCTL		0x0D
-#define TWL6040_REG_MICGAIN		0x0E
-#define TWL6040_REG_LINEGAIN		0x0F
-#define TWL6040_REG_HSLCTL		0x10
-#define TWL6040_REG_HSRCTL		0x11
-#define TWL6040_REG_HSGAIN		0x12
-#define TWL6040_REG_EARCTL		0x13
-#define TWL6040_REG_HFLCTL		0x14
-#define TWL6040_REG_HFLGAIN		0x15
-#define TWL6040_REG_HFRCTL		0x16
-#define TWL6040_REG_HFRGAIN		0x17
-#define TWL6040_REG_VIBCTLL		0x18
-#define TWL6040_REG_VIBDATL		0x19
-#define TWL6040_REG_VIBCTLR		0x1A
-#define TWL6040_REG_VIBDATR		0x1B
-#define TWL6040_REG_HKCTL1		0x1C
-#define TWL6040_REG_HKCTL2		0x1D
-#define TWL6040_REG_GPOCTL		0x1E
-#define TWL6040_REG_ALB			0x1F
-#define TWL6040_REG_DLB			0x20
-#define TWL6040_REG_TRIM1		0x28
-#define TWL6040_REG_TRIM2		0x29
-#define TWL6040_REG_TRIM3		0x2A
-#define TWL6040_REG_HSOTRIM		0x2B
-#define TWL6040_REG_HFOTRIM		0x2C
-#define TWL6040_REG_ACCCTL		0x2D
-#define TWL6040_REG_STATUS		0x2E
-
-/* INTID (0x03) fields */
-
-#define TWL6040_THINT			0x01
-#define TWL6040_PLUGINT			0x02
-#define TWL6040_UNPLUGINT		0x04
-#define TWL6040_HOOKINT			0x08
-#define TWL6040_HFINT			0x10
-#define TWL6040_VIBINT			0x20
-#define TWL6040_READYINT		0x40
-
-/* INTMR (0x04) fields */
-
-#define TWL6040_THMSK			0x01
-#define TWL6040_PLUGMSK			0x02
-#define TWL6040_HOOKMSK			0x08
-#define TWL6040_HFMSK			0x10
-#define TWL6040_VIBMSK			0x20
-#define TWL6040_READYMSK		0x40
-#define TWL6040_ALLINT_MSK		0x7B
-
-/* NCPCTL (0x05) fields */
-
-#define TWL6040_NCPENA			0x01
-#define TWL6040_NCPOPEN			0x40
-
-/* LDOCTL (0x06) fields */
-
-#define TWL6040_LSLDOENA		0x01
-#define TWL6040_HSLDOENA		0x04
-#define TWL6040_REFENA			0x40
-#define TWL6040_OSCENA			0x80
-
-/* HPPLLCTL (0x07) fields */
-
-#define TWL6040_HPLLENA			0x01
-#define TWL6040_HPLLRST			0x02
-#define TWL6040_HPLLBP			0x04
-#define TWL6040_HPLLSQRENA		0x08
-#define TWL6040_MCLK_12000KHZ		(0 << 5)
-#define TWL6040_MCLK_19200KHZ		(1 << 5)
-#define TWL6040_MCLK_26000KHZ		(2 << 5)
-#define TWL6040_MCLK_38400KHZ		(3 << 5)
-#define TWL6040_MCLK_MSK		0x60
-
-/* LPPLLCTL (0x08) fields */
-
-#define TWL6040_LPLLENA			0x01
-#define TWL6040_LPLLRST			0x02
-#define TWL6040_LPLLSEL			0x04
-#define TWL6040_LPLLFIN			0x08
-#define TWL6040_HPLLSEL			0x10
-
-/* HSLCTL/R (0x10/0x11) fields */
-
-#define TWL6040_HSDACENA		(1 << 0)
-#define TWL6040_HSDACMODE		(1 << 1)
-#define TWL6040_HSDRVMODE		(1 << 3)
-
-/* VIBCTLL/R (0x18/0x1A) fields */
-
-#define TWL6040_VIBENA			(1 << 0)
-#define TWL6040_VIBSEL			(1 << 1)
-#define TWL6040_VIBCTRL			(1 << 2)
-#define TWL6040_VIBCTRL_P		(1 << 3)
-#define TWL6040_VIBCTRL_N		(1 << 4)
-
-/* VIBDATL/R (0x19/0x1B) fields */
-
-#define TWL6040_VIBDAT_MAX		0x64
-
-/* GPOCTL (0x1E) fields */
-
-#define TWL6040_GPO1			0x01
-#define TWL6040_GPO2			0x02
-#define TWL6040_GPO3			0x03
-
-/* ACCCTL (0x2D) fields */
-
-#define TWL6040_I2CSEL			0x01
-#define TWL6040_RESETSPLIT		0x04
-#define TWL6040_INTCLRMODE		0x08
-
-/* STATUS (0x2E) fields */
-
-#define TWL6040_PLUGCOMP		0x02
-#define TWL6040_VIBLOCDET		0x10
-#define TWL6040_VIBROCDET		0x20
-#define TWL6040_TSHUTDET                0x40
-
-#define TWL6040_CELLS			2
-
-#define TWL6040_REV_ES1_0		0x00
-#define TWL6040_REV_ES1_1		0x01
-#define TWL6040_REV_ES1_2		0x02
-
-#define TWL6040_IRQ_TH			0
-#define TWL6040_IRQ_PLUG		1
-#define TWL6040_IRQ_HOOK		2
-#define TWL6040_IRQ_HF			3
-#define TWL6040_IRQ_VIB			4
-#define TWL6040_IRQ_READY		5
-
-/* PLL selection */
-#define TWL6040_SYSCLK_SEL_LPPLL	0
-#define TWL6040_SYSCLK_SEL_HPPLL	1
-
-struct twl6040_codec_data {
-	u16 hs_left_step;
-	u16 hs_right_step;
-	u16 hf_left_step;
-	u16 hf_right_step;
-};
-
-struct twl6040_vibra_data {
-	unsigned int vibldrv_res;	/* left driver resistance */
-	unsigned int vibrdrv_res;	/* right driver resistance */
-	unsigned int viblmotor_res;	/* left motor resistance */
-	unsigned int vibrmotor_res;	/* right motor resistance */
-	int vddvibl_uV;			/* VDDVIBL volt, set 0 for fixed reg */
-	int vddvibr_uV;			/* VDDVIBR volt, set 0 for fixed reg */
-};
-
-struct twl6040_platform_data {
-	int audpwron_gpio;	/* audio power-on gpio */
-	unsigned int irq_base;
-
-	struct twl6040_codec_data *codec;
-	struct twl6040_vibra_data *vibra;
-};
-
-struct regmap;
-
-struct twl6040 {
-	struct device *dev;
-	struct regmap *regmap;
-	struct mutex mutex;
-	struct mutex io_mutex;
-	struct mutex irq_mutex;
-	struct mfd_cell cells[TWL6040_CELLS];
-	struct completion ready;
-
-	int audpwron;
-	int power_count;
-	int rev;
-	u8 vibra_ctrl_cache[2];
-
-	/* PLL configuration */
-	int pll;
-	unsigned int sysclk;
-	unsigned int mclk;
-
-	unsigned int irq;
-	unsigned int irq_base;
-	u8 irq_masks_cur;
-	u8 irq_masks_cache;
-};
-
-int twl6040_reg_read(struct twl6040 *twl6040, unsigned int reg);
-int twl6040_reg_write(struct twl6040 *twl6040, unsigned int reg,
-		      u8 val);
-int twl6040_set_bits(struct twl6040 *twl6040, unsigned int reg,
-		     u8 mask);
-int twl6040_clear_bits(struct twl6040 *twl6040, unsigned int reg,
-		       u8 mask);
-int twl6040_power(struct twl6040 *twl6040, int on);
-int twl6040_set_pll(struct twl6040 *twl6040, int pll_id,
-		    unsigned int freq_in, unsigned int freq_out);
-int twl6040_get_pll(struct twl6040 *twl6040);
-unsigned int twl6040_get_sysclk(struct twl6040 *twl6040);
-int twl6040_irq_init(struct twl6040 *twl6040);
-void twl6040_irq_exit(struct twl6040 *twl6040);
-/* Get the combined status of the vibra control register */
-int twl6040_get_vibralr_status(struct twl6040 *twl6040);
-
-static inline int twl6040_get_revid(struct twl6040 *twl6040)
-{
-	return twl6040->rev;
-}
-
-
-#endif  /* End of __TWL6040_CODEC_H__ */
diff --git a/ANDROID_3.4.5/include/linux/mfd/ucb1x00.h b/ANDROID_3.4.5/include/linux/mfd/ucb1x00.h
deleted file mode 100644
index 28af4175..00000000
--- a/ANDROID_3.4.5/include/linux/mfd/ucb1x00.h
+++ /dev/null
@@ -1,259 +0,0 @@
-/*
- *  linux/include/mfd/ucb1x00.h
- *
- *  Copyright (C) 2001 Russell King, All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License.
- */
-#ifndef UCB1200_H
-#define UCB1200_H
-
-#include <linux/mfd/mcp.h>
-#include <linux/gpio.h>
-#include <linux/mutex.h>
-
-#define UCB_IO_DATA	0x00
-#define UCB_IO_DIR	0x01
-
-#define UCB_IO_0		(1 << 0)
-#define UCB_IO_1		(1 << 1)
-#define UCB_IO_2		(1 << 2)
-#define UCB_IO_3		(1 << 3)
-#define UCB_IO_4		(1 << 4)
-#define UCB_IO_5		(1 << 5)
-#define UCB_IO_6		(1 << 6)
-#define UCB_IO_7		(1 << 7)
-#define UCB_IO_8		(1 << 8)
-#define UCB_IO_9		(1 << 9)
-
-#define UCB_IE_RIS	0x02
-#define UCB_IE_FAL	0x03
-#define UCB_IE_STATUS	0x04
-#define UCB_IE_CLEAR	0x04
-#define UCB_IE_ADC		(1 << 11)
-#define UCB_IE_TSPX		(1 << 12)
-#define UCB_IE_TSMX		(1 << 13)
-#define UCB_IE_TCLIP		(1 << 14)
-#define UCB_IE_ACLIP		(1 << 15)
-
-#define UCB_IRQ_TSPX		12
-
-#define UCB_TC_A	0x05
-#define UCB_TC_A_LOOP		(1 << 7)	/* UCB1200 */
-#define UCB_TC_A_AMPL		(1 << 7)	/* UCB1300 */
-
-#define UCB_TC_B	0x06
-#define UCB_TC_B_VOICE_ENA	(1 << 3)
-#define UCB_TC_B_CLIP		(1 << 4)
-#define UCB_TC_B_ATT		(1 << 6)
-#define UCB_TC_B_SIDE_ENA	(1 << 11)
-#define UCB_TC_B_MUTE		(1 << 13)
-#define UCB_TC_B_IN_ENA		(1 << 14)
-#define UCB_TC_B_OUT_ENA	(1 << 15)
-
-#define UCB_AC_A	0x07
-#define UCB_AC_B	0x08
-#define UCB_AC_B_LOOP		(1 << 8)
-#define UCB_AC_B_MUTE		(1 << 13)
-#define UCB_AC_B_IN_ENA		(1 << 14)
-#define UCB_AC_B_OUT_ENA	(1 << 15)
-
-#define UCB_TS_CR	0x09
-#define UCB_TS_CR_TSMX_POW	(1 << 0)
-#define UCB_TS_CR_TSPX_POW	(1 << 1)
-#define UCB_TS_CR_TSMY_POW	(1 << 2)
-#define UCB_TS_CR_TSPY_POW	(1 << 3)
-#define UCB_TS_CR_TSMX_GND	(1 << 4)
-#define UCB_TS_CR_TSPX_GND	(1 << 5)
-#define UCB_TS_CR_TSMY_GND	(1 << 6)
-#define UCB_TS_CR_TSPY_GND	(1 << 7)
-#define UCB_TS_CR_MODE_INT	(0 << 8)
-#define UCB_TS_CR_MODE_PRES	(1 << 8)
-#define UCB_TS_CR_MODE_POS	(2 << 8)
-#define UCB_TS_CR_BIAS_ENA	(1 << 11)
-#define UCB_TS_CR_TSPX_LOW	(1 << 12)
-#define UCB_TS_CR_TSMX_LOW	(1 << 13)
-
-#define UCB_ADC_CR	0x0a
-#define UCB_ADC_SYNC_ENA	(1 << 0)
-#define UCB_ADC_VREFBYP_CON	(1 << 1)
-#define UCB_ADC_INP_TSPX	(0 << 2)
-#define UCB_ADC_INP_TSMX	(1 << 2)
-#define UCB_ADC_INP_TSPY	(2 << 2)
-#define UCB_ADC_INP_TSMY	(3 << 2)
-#define UCB_ADC_INP_AD0		(4 << 2)
-#define UCB_ADC_INP_AD1		(5 << 2)
-#define UCB_ADC_INP_AD2		(6 << 2)
-#define UCB_ADC_INP_AD3		(7 << 2)
-#define UCB_ADC_EXT_REF		(1 << 5)
-#define UCB_ADC_START		(1 << 7)
-#define UCB_ADC_ENA		(1 << 15)
-
-#define UCB_ADC_DATA	0x0b
-#define UCB_ADC_DAT_VAL		(1 << 15)
-#define UCB_ADC_DAT(x)		(((x) & 0x7fe0) >> 5)
-
-#define UCB_ID		0x0c
-#define UCB_ID_1200		0x1004
-#define UCB_ID_1300		0x1005
-#define UCB_ID_TC35143          0x9712
-
-#define UCB_MODE	0x0d
-#define UCB_MODE_DYN_VFLAG_ENA	(1 << 12)
-#define UCB_MODE_AUD_OFF_CAN	(1 << 13)
-
-enum ucb1x00_reset {
-	UCB_RST_PROBE,
-	UCB_RST_RESUME,
-	UCB_RST_SUSPEND,
-	UCB_RST_REMOVE,
-	UCB_RST_PROBE_FAIL,
-};
-
-struct ucb1x00_plat_data {
-	void			(*reset)(enum ucb1x00_reset);
-	unsigned		irq_base;
-	int			gpio_base;
-	unsigned		can_wakeup;
-};
-
-struct ucb1x00 {
-	raw_spinlock_t		irq_lock;
-	struct mcp		*mcp;
-	unsigned int		irq;
-	int			irq_base;
-	struct mutex		adc_mutex;
-	spinlock_t		io_lock;
-	u16			id;
-	u16			io_dir;
-	u16			io_out;
-	u16			adc_cr;
-	u16			irq_fal_enbl;
-	u16			irq_ris_enbl;
-	u16			irq_mask;
-	u16			irq_wake;
-	struct device		dev;
-	struct list_head	node;
-	struct list_head	devs;
-	struct gpio_chip 	gpio;
-};
-
-struct ucb1x00_driver;
-
-struct ucb1x00_dev {
-	struct list_head	dev_node;
-	struct list_head	drv_node;
-	struct ucb1x00		*ucb;
-	struct ucb1x00_driver	*drv;
-	void			*priv;
-};
-
-struct ucb1x00_driver {
-	struct list_head	node;
-	struct list_head	devs;
-	int	(*add)(struct ucb1x00_dev *dev);
-	void	(*remove)(struct ucb1x00_dev *dev);
-	int	(*suspend)(struct ucb1x00_dev *dev);
-	int	(*resume)(struct ucb1x00_dev *dev);
-};
-
-#define classdev_to_ucb1x00(cd)	container_of(cd, struct ucb1x00, dev)
-
-int ucb1x00_register_driver(struct ucb1x00_driver *);
-void ucb1x00_unregister_driver(struct ucb1x00_driver *);
-
-/**
- *	ucb1x00_clkrate - return the UCB1x00 SIB clock rate
- *	@ucb: UCB1x00 structure describing chip
- *
- *	Return the SIB clock rate in Hz.
- */
-static inline unsigned int ucb1x00_clkrate(struct ucb1x00 *ucb)
-{
-	return mcp_get_sclk_rate(ucb->mcp);
-}
-
-/**
- *	ucb1x00_enable - enable the UCB1x00 SIB clock
- *	@ucb: UCB1x00 structure describing chip
- *
- *	Enable the SIB clock.  This can be called multiple times.
- */
-static inline void ucb1x00_enable(struct ucb1x00 *ucb)
-{
-	mcp_enable(ucb->mcp);
-}
-
-/**
- *	ucb1x00_disable - disable the UCB1x00 SIB clock
- *	@ucb: UCB1x00 structure describing chip
- *
- *	Disable the SIB clock.  The SIB clock will only be disabled
- *	when the number of ucb1x00_enable calls match the number of
- *	ucb1x00_disable calls.
- */
-static inline void ucb1x00_disable(struct ucb1x00 *ucb)
-{
-	mcp_disable(ucb->mcp);
-}
-
-/**
- *	ucb1x00_reg_write - write a UCB1x00 register
- *	@ucb: UCB1x00 structure describing chip
- *	@reg: UCB1x00 4-bit register index to write
- *	@val: UCB1x00 16-bit value to write
- *
- *	Write the UCB1x00 register @reg with value @val.  The SIB
- *	clock must be running for this function to return.
- */
-static inline void ucb1x00_reg_write(struct ucb1x00 *ucb, unsigned int reg, unsigned int val)
-{
-	mcp_reg_write(ucb->mcp, reg, val);
-}
-
-/**
- *	ucb1x00_reg_read - read a UCB1x00 register
- *	@ucb: UCB1x00 structure describing chip
- *	@reg: UCB1x00 4-bit register index to write
- *
- *	Read the UCB1x00 register @reg and return its value.  The SIB
- *	clock must be running for this function to return.
- */
-static inline unsigned int ucb1x00_reg_read(struct ucb1x00 *ucb, unsigned int reg)
-{
-	return mcp_reg_read(ucb->mcp, reg);
-}
-/**
- *	ucb1x00_set_audio_divisor - 
- *	@ucb: UCB1x00 structure describing chip
- *	@div: SIB clock divisor
- */
-static inline void ucb1x00_set_audio_divisor(struct ucb1x00 *ucb, unsigned int div)
-{
-	mcp_set_audio_divisor(ucb->mcp, div);
-}
-
-/**
- *	ucb1x00_set_telecom_divisor -
- *	@ucb: UCB1x00 structure describing chip
- *	@div: SIB clock divisor
- */
-static inline void ucb1x00_set_telecom_divisor(struct ucb1x00 *ucb, unsigned int div)
-{
-	mcp_set_telecom_divisor(ucb->mcp, div);
-}
-
-void ucb1x00_io_set_dir(struct ucb1x00 *ucb, unsigned int, unsigned int);
-void ucb1x00_io_write(struct ucb1x00 *ucb, unsigned int, unsigned int);
-unsigned int ucb1x00_io_read(struct ucb1x00 *ucb);
-
-#define UCB_NOSYNC	(0)
-#define UCB_SYNC	(1)
-
-unsigned int ucb1x00_adc_read(struct ucb1x00 *ucb, int adc_channel, int sync);
-void ucb1x00_adc_enable(struct ucb1x00 *ucb);
-void ucb1x00_adc_disable(struct ucb1x00 *ucb);
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/mfd/vt1603/core.h b/ANDROID_3.4.5/include/linux/mfd/vt1603/core.h
deleted file mode 100755
index 3dc639c2..00000000
--- a/ANDROID_3.4.5/include/linux/mfd/vt1603/core.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/*++ 
- * WonderMedia core driver for VT1603/VT1609
- *
- * Copyright c 2010  WonderMedia  Technologies, Inc.
- *
- * This program is free software: you can redistribute it and/or modify 
- * it under the terms of the GNU General Public License as published by 
- * the Free Software Foundation, either version 2 of the License, or 
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, 
- * but WITHOUT ANY WARRANTY; without even the implied warranty of 
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the 
- * GNU General Public License for more details. 
- *
- * You should have received a copy of the GNU General Public License 
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- *
- * WonderMedia Technologies, Inc.
- * 4F, 533, Chung-Cheng Road, Hsin-Tien, Taipei 231, R.O.C
---*/
-
-#ifndef __MFD_VT1603_CORE_H__
-#define __MFD_VT1603_CORE_H__
-
-enum vt1603_type {
-	VT1603 = 0,
-	VT1609 = 1,
-};
-
-struct vt1603 {
-	int (*reg_read)(struct vt1603 *vt1603, u8 reg, u8 *val);
-	int (*reg_write)(struct vt1603 *vt1603, u8 reg, u8 val);
-	void *control_data;
-	int type;
-	struct device *dev;
-};
-
-/* Device I/O API */
-int vt1603_reg_write(struct vt1603 *vt1603, u8 reg, u8 val);
-int vt1603_reg_read(struct vt1603 *vt1603, u8 reg, u8 *val);
-void vt1603_regs_dump(struct vt1603 *vt1603);
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/mfd/wl1273-core.h b/ANDROID_3.4.5/include/linux/mfd/wl1273-core.h
deleted file mode 100644
index db2f3f45..00000000
--- a/ANDROID_3.4.5/include/linux/mfd/wl1273-core.h
+++ /dev/null
@@ -1,290 +0,0 @@
-/*
- * include/linux/mfd/wl1273-core.h
- *
- * Some definitions for the wl1273 radio receiver/transmitter chip.
- *
- * Copyright (C) 2010 Nokia Corporation
- * Author: Matti J. Aaltonen <matti.j.aaltonen@nokia.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- */
-
-#ifndef WL1273_CORE_H
-#define WL1273_CORE_H
-
-#include <linux/i2c.h>
-#include <linux/mfd/core.h>
-
-#define WL1273_FM_DRIVER_NAME	"wl1273-fm"
-#define RX71_FM_I2C_ADDR	0x22
-
-#define WL1273_STEREO_GET		0
-#define WL1273_RSSI_LVL_GET		1
-#define WL1273_IF_COUNT_GET		2
-#define WL1273_FLAG_GET			3
-#define WL1273_RDS_SYNC_GET		4
-#define WL1273_RDS_DATA_GET		5
-#define WL1273_FREQ_SET			10
-#define WL1273_AF_FREQ_SET		11
-#define WL1273_MOST_MODE_SET		12
-#define WL1273_MOST_BLEND_SET		13
-#define WL1273_DEMPH_MODE_SET		14
-#define WL1273_SEARCH_LVL_SET		15
-#define WL1273_BAND_SET			16
-#define WL1273_MUTE_STATUS_SET		17
-#define WL1273_RDS_PAUSE_LVL_SET	18
-#define WL1273_RDS_PAUSE_DUR_SET	19
-#define WL1273_RDS_MEM_SET		20
-#define WL1273_RDS_BLK_B_SET		21
-#define WL1273_RDS_MSK_B_SET		22
-#define WL1273_RDS_PI_MASK_SET		23
-#define WL1273_RDS_PI_SET		24
-#define WL1273_RDS_SYSTEM_SET		25
-#define WL1273_INT_MASK_SET		26
-#define WL1273_SEARCH_DIR_SET		27
-#define WL1273_VOLUME_SET		28
-#define WL1273_AUDIO_ENABLE		29
-#define WL1273_PCM_MODE_SET		30
-#define WL1273_I2S_MODE_CONFIG_SET	31
-#define WL1273_POWER_SET		32
-#define WL1273_INTX_CONFIG_SET		33
-#define WL1273_PULL_EN_SET		34
-#define WL1273_HILO_SET			35
-#define WL1273_SWITCH2FREF		36
-#define WL1273_FREQ_DRIFT_REPORT	37
-
-#define WL1273_PCE_GET			40
-#define WL1273_FIRM_VER_GET		41
-#define WL1273_ASIC_VER_GET		42
-#define WL1273_ASIC_ID_GET		43
-#define WL1273_MAN_ID_GET		44
-#define WL1273_TUNER_MODE_SET		45
-#define WL1273_STOP_SEARCH		46
-#define WL1273_RDS_CNTRL_SET		47
-
-#define WL1273_WRITE_HARDWARE_REG	100
-#define WL1273_CODE_DOWNLOAD		101
-#define WL1273_RESET			102
-
-#define WL1273_FM_POWER_MODE		254
-#define WL1273_FM_INTERRUPT		255
-
-/* Transmitter API */
-
-#define WL1273_CHANL_SET			55
-#define WL1273_SCAN_SPACING_SET			56
-#define WL1273_REF_SET				57
-#define WL1273_POWER_ENB_SET			90
-#define WL1273_POWER_ATT_SET			58
-#define WL1273_POWER_LEV_SET			59
-#define WL1273_AUDIO_DEV_SET			60
-#define WL1273_PILOT_DEV_SET			61
-#define WL1273_RDS_DEV_SET			62
-#define WL1273_PUPD_SET				91
-#define WL1273_AUDIO_IO_SET			63
-#define WL1273_PREMPH_SET			64
-#define WL1273_MONO_SET				66
-#define WL1273_MUTE				92
-#define WL1273_MPX_LMT_ENABLE			67
-#define WL1273_PI_SET				93
-#define WL1273_ECC_SET				69
-#define WL1273_PTY				70
-#define WL1273_AF				71
-#define WL1273_DISPLAY_MODE			74
-#define WL1273_RDS_REP_SET			77
-#define WL1273_RDS_CONFIG_DATA_SET		98
-#define WL1273_RDS_DATA_SET			99
-#define WL1273_RDS_DATA_ENB			94
-#define WL1273_TA_SET				78
-#define WL1273_TP_SET				79
-#define WL1273_DI_SET				80
-#define WL1273_MS_SET				81
-#define WL1273_PS_SCROLL_SPEED			82
-#define WL1273_TX_AUDIO_LEVEL_TEST		96
-#define WL1273_TX_AUDIO_LEVEL_TEST_THRESHOLD	73
-#define WL1273_TX_AUDIO_INPUT_LEVEL_RANGE_SET	54
-#define WL1273_RX_ANTENNA_SELECT		87
-#define WL1273_I2C_DEV_ADDR_SET			86
-#define WL1273_REF_ERR_CALIB_PARAM_SET		88
-#define WL1273_REF_ERR_CALIB_PERIODICITY_SET	89
-#define WL1273_SOC_INT_TRIGGER			52
-#define WL1273_SOC_AUDIO_PATH_SET		83
-#define WL1273_SOC_PCMI_OVERRIDE		84
-#define WL1273_SOC_I2S_OVERRIDE			85
-#define WL1273_RSSI_BLOCK_SCAN_FREQ_SET		95
-#define WL1273_RSSI_BLOCK_SCAN_START		97
-#define WL1273_RSSI_BLOCK_SCAN_DATA_GET		5
-#define WL1273_READ_FMANT_TUNE_VALUE		104
-
-#define WL1273_RDS_OFF		0
-#define WL1273_RDS_ON		1
-#define WL1273_RDS_RESET	2
-
-#define WL1273_AUDIO_DIGITAL	0
-#define WL1273_AUDIO_ANALOG	1
-
-#define WL1273_MODE_RX		BIT(0)
-#define WL1273_MODE_TX		BIT(1)
-#define WL1273_MODE_OFF		BIT(2)
-#define WL1273_MODE_SUSPENDED	BIT(3)
-
-#define WL1273_RADIO_CHILD	BIT(0)
-#define WL1273_CODEC_CHILD	BIT(1)
-
-#define WL1273_RX_MONO		1
-#define WL1273_RX_STEREO	0
-#define WL1273_TX_MONO		0
-#define WL1273_TX_STEREO	1
-
-#define WL1273_MAX_VOLUME	0xffff
-#define WL1273_DEFAULT_VOLUME	0x78b8
-
-/* I2S protocol, left channel first, data width 16 bits */
-#define WL1273_PCM_DEF_MODE		0x00
-
-/* Rx */
-#define WL1273_AUDIO_ENABLE_I2S		BIT(0)
-#define WL1273_AUDIO_ENABLE_ANALOG	BIT(1)
-
-/* Tx */
-#define WL1273_AUDIO_IO_SET_ANALOG	0
-#define WL1273_AUDIO_IO_SET_I2S		1
-
-#define WL1273_PUPD_SET_OFF		0x00
-#define WL1273_PUPD_SET_ON		0x01
-#define WL1273_PUPD_SET_RETENTION	0x10
-
-/* I2S mode */
-#define WL1273_IS2_WIDTH_32	0x0
-#define WL1273_IS2_WIDTH_40	0x1
-#define WL1273_IS2_WIDTH_22_23	0x2
-#define WL1273_IS2_WIDTH_23_22	0x3
-#define WL1273_IS2_WIDTH_48	0x4
-#define WL1273_IS2_WIDTH_50	0x5
-#define WL1273_IS2_WIDTH_60	0x6
-#define WL1273_IS2_WIDTH_64	0x7
-#define WL1273_IS2_WIDTH_80	0x8
-#define WL1273_IS2_WIDTH_96	0x9
-#define WL1273_IS2_WIDTH_128	0xa
-#define WL1273_IS2_WIDTH	0xf
-
-#define WL1273_IS2_FORMAT_STD	(0x0 << 4)
-#define WL1273_IS2_FORMAT_LEFT	(0x1 << 4)
-#define WL1273_IS2_FORMAT_RIGHT	(0x2 << 4)
-#define WL1273_IS2_FORMAT_USER	(0x3 << 4)
-
-#define WL1273_IS2_MASTER	(0x0 << 6)
-#define WL1273_IS2_SLAVEW	(0x1 << 6)
-
-#define WL1273_IS2_TRI_AFTER_SENDING	(0x0 << 7)
-#define WL1273_IS2_TRI_ALWAYS_ACTIVE	(0x1 << 7)
-
-#define WL1273_IS2_SDOWS_RR	(0x0 << 8)
-#define WL1273_IS2_SDOWS_RF	(0x1 << 8)
-#define WL1273_IS2_SDOWS_FR	(0x2 << 8)
-#define WL1273_IS2_SDOWS_FF	(0x3 << 8)
-
-#define WL1273_IS2_TRI_OPT	(0x0 << 10)
-#define WL1273_IS2_TRI_ALWAYS	(0x1 << 10)
-
-#define WL1273_IS2_RATE_48K	(0x0 << 12)
-#define WL1273_IS2_RATE_44_1K	(0x1 << 12)
-#define WL1273_IS2_RATE_32K	(0x2 << 12)
-#define WL1273_IS2_RATE_22_05K	(0x4 << 12)
-#define WL1273_IS2_RATE_16K	(0x5 << 12)
-#define WL1273_IS2_RATE_12K	(0x8 << 12)
-#define WL1273_IS2_RATE_11_025	(0x9 << 12)
-#define WL1273_IS2_RATE_8K	(0xa << 12)
-#define WL1273_IS2_RATE		(0xf << 12)
-
-#define WL1273_I2S_DEF_MODE	(WL1273_IS2_WIDTH_32 | \
-				 WL1273_IS2_FORMAT_STD | \
-				 WL1273_IS2_MASTER | \
-				 WL1273_IS2_TRI_AFTER_SENDING | \
-				 WL1273_IS2_SDOWS_RR | \
-				 WL1273_IS2_TRI_OPT | \
-				 WL1273_IS2_RATE_48K)
-
-#define SCHAR_MIN (-128)
-#define SCHAR_MAX 127
-
-#define WL1273_FR_EVENT			BIT(0)
-#define WL1273_BL_EVENT			BIT(1)
-#define WL1273_RDS_EVENT		BIT(2)
-#define WL1273_BBLK_EVENT		BIT(3)
-#define WL1273_LSYNC_EVENT		BIT(4)
-#define WL1273_LEV_EVENT		BIT(5)
-#define WL1273_IFFR_EVENT		BIT(6)
-#define WL1273_PI_EVENT			BIT(7)
-#define WL1273_PD_EVENT			BIT(8)
-#define WL1273_STIC_EVENT		BIT(9)
-#define WL1273_MAL_EVENT		BIT(10)
-#define WL1273_POW_ENB_EVENT		BIT(11)
-#define WL1273_SCAN_OVER_EVENT		BIT(12)
-#define WL1273_ERROR_EVENT		BIT(13)
-
-#define TUNER_MODE_STOP_SEARCH		0
-#define TUNER_MODE_PRESET		1
-#define TUNER_MODE_AUTO_SEEK		2
-#define TUNER_MODE_AF			3
-#define TUNER_MODE_AUTO_SEEK_PI		4
-#define TUNER_MODE_AUTO_SEEK_BULK	5
-
-#define RDS_BLOCK_SIZE	3
-
-struct wl1273_fm_platform_data {
-	int (*request_resources) (struct i2c_client *client);
-	void (*free_resources) (void);
-	void (*enable) (void);
-	void (*disable) (void);
-
-	u8 forbidden_modes;
-	unsigned int children;
-};
-
-#define WL1273_FM_CORE_CELLS	2
-
-#define WL1273_BAND_OTHER	0
-#define WL1273_BAND_JAPAN	1
-
-#define WL1273_BAND_JAPAN_LOW	76000
-#define WL1273_BAND_JAPAN_HIGH	90000
-#define WL1273_BAND_OTHER_LOW	87500
-#define WL1273_BAND_OTHER_HIGH	108000
-
-#define WL1273_BAND_TX_LOW	76000
-#define WL1273_BAND_TX_HIGH	108000
-
-struct wl1273_core {
-	struct mfd_cell cells[WL1273_FM_CORE_CELLS];
-	struct wl1273_fm_platform_data *pdata;
-
-	unsigned int mode;
-	unsigned int i2s_mode;
-	unsigned int volume;
-	unsigned int audio_mode;
-	unsigned int channel_number;
-	struct mutex lock; /* for serializing fm radio operations */
-
-	struct i2c_client *client;
-
-	int (*read)(struct wl1273_core *core, u8, u16 *);
-	int (*write)(struct wl1273_core *core, u8, u16);
-	int (*write_data)(struct wl1273_core *core, u8 *, u16);
-	int (*set_audio)(struct wl1273_core *core, unsigned int);
-	int (*set_volume)(struct wl1273_core *core, unsigned int);
-};
-
-#endif	/* ifndef WL1273_CORE_H */
diff --git a/ANDROID_3.4.5/include/linux/mfd/wm831x/auxadc.h b/ANDROID_3.4.5/include/linux/mfd/wm831x/auxadc.h
deleted file mode 100644
index b132067e..00000000
--- a/ANDROID_3.4.5/include/linux/mfd/wm831x/auxadc.h
+++ /dev/null
@@ -1,216 +0,0 @@
-/*
- * include/linux/mfd/wm831x/auxadc.h -- Auxiliary ADC interface for WM831x
- *
- * Copyright 2009 Wolfson Microelectronics PLC.
- *
- * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- */
-
-#ifndef __MFD_WM831X_AUXADC_H__
-#define __MFD_WM831X_AUXADC_H__
-
-/*
- * R16429 (0x402D) - AuxADC Data
- */
-#define WM831X_AUX_DATA_SRC_MASK                0xF000  /* AUX_DATA_SRC - [15:12] */
-#define WM831X_AUX_DATA_SRC_SHIFT                   12  /* AUX_DATA_SRC - [15:12] */
-#define WM831X_AUX_DATA_SRC_WIDTH                    4  /* AUX_DATA_SRC - [15:12] */
-#define WM831X_AUX_DATA_MASK                    0x0FFF  /* AUX_DATA - [11:0] */
-#define WM831X_AUX_DATA_SHIFT                        0  /* AUX_DATA - [11:0] */
-#define WM831X_AUX_DATA_WIDTH                       12  /* AUX_DATA - [11:0] */
-
-/*
- * R16430 (0x402E) - AuxADC Control
- */
-#define WM831X_AUX_ENA                          0x8000  /* AUX_ENA */
-#define WM831X_AUX_ENA_MASK                     0x8000  /* AUX_ENA */
-#define WM831X_AUX_ENA_SHIFT                        15  /* AUX_ENA */
-#define WM831X_AUX_ENA_WIDTH                         1  /* AUX_ENA */
-#define WM831X_AUX_CVT_ENA                      0x4000  /* AUX_CVT_ENA */
-#define WM831X_AUX_CVT_ENA_MASK                 0x4000  /* AUX_CVT_ENA */
-#define WM831X_AUX_CVT_ENA_SHIFT                    14  /* AUX_CVT_ENA */
-#define WM831X_AUX_CVT_ENA_WIDTH                     1  /* AUX_CVT_ENA */
-#define WM831X_AUX_SLPENA                       0x1000  /* AUX_SLPENA */
-#define WM831X_AUX_SLPENA_MASK                  0x1000  /* AUX_SLPENA */
-#define WM831X_AUX_SLPENA_SHIFT                     12  /* AUX_SLPENA */
-#define WM831X_AUX_SLPENA_WIDTH                      1  /* AUX_SLPENA */
-#define WM831X_AUX_FRC_ENA                      0x0800  /* AUX_FRC_ENA */
-#define WM831X_AUX_FRC_ENA_MASK                 0x0800  /* AUX_FRC_ENA */
-#define WM831X_AUX_FRC_ENA_SHIFT                    11  /* AUX_FRC_ENA */
-#define WM831X_AUX_FRC_ENA_WIDTH                     1  /* AUX_FRC_ENA */
-#define WM831X_AUX_RATE_MASK                    0x003F  /* AUX_RATE - [5:0] */
-#define WM831X_AUX_RATE_SHIFT                        0  /* AUX_RATE - [5:0] */
-#define WM831X_AUX_RATE_WIDTH                        6  /* AUX_RATE - [5:0] */
-
-/*
- * R16431 (0x402F) - AuxADC Source
- */
-#define WM831X_AUX_CAL_SEL                      0x8000  /* AUX_CAL_SEL */
-#define WM831X_AUX_CAL_SEL_MASK                 0x8000  /* AUX_CAL_SEL */
-#define WM831X_AUX_CAL_SEL_SHIFT                    15  /* AUX_CAL_SEL */
-#define WM831X_AUX_CAL_SEL_WIDTH                     1  /* AUX_CAL_SEL */
-#define WM831X_AUX_BKUP_BATT_SEL                0x0400  /* AUX_BKUP_BATT_SEL */
-#define WM831X_AUX_BKUP_BATT_SEL_MASK           0x0400  /* AUX_BKUP_BATT_SEL */
-#define WM831X_AUX_BKUP_BATT_SEL_SHIFT              10  /* AUX_BKUP_BATT_SEL */
-#define WM831X_AUX_BKUP_BATT_SEL_WIDTH               1  /* AUX_BKUP_BATT_SEL */
-#define WM831X_AUX_WALL_SEL                     0x0200  /* AUX_WALL_SEL */
-#define WM831X_AUX_WALL_SEL_MASK                0x0200  /* AUX_WALL_SEL */
-#define WM831X_AUX_WALL_SEL_SHIFT                    9  /* AUX_WALL_SEL */
-#define WM831X_AUX_WALL_SEL_WIDTH                    1  /* AUX_WALL_SEL */
-#define WM831X_AUX_BATT_SEL                     0x0100  /* AUX_BATT_SEL */
-#define WM831X_AUX_BATT_SEL_MASK                0x0100  /* AUX_BATT_SEL */
-#define WM831X_AUX_BATT_SEL_SHIFT                    8  /* AUX_BATT_SEL */
-#define WM831X_AUX_BATT_SEL_WIDTH                    1  /* AUX_BATT_SEL */
-#define WM831X_AUX_USB_SEL                      0x0080  /* AUX_USB_SEL */
-#define WM831X_AUX_USB_SEL_MASK                 0x0080  /* AUX_USB_SEL */
-#define WM831X_AUX_USB_SEL_SHIFT                     7  /* AUX_USB_SEL */
-#define WM831X_AUX_USB_SEL_WIDTH                     1  /* AUX_USB_SEL */
-#define WM831X_AUX_SYSVDD_SEL                   0x0040  /* AUX_SYSVDD_SEL */
-#define WM831X_AUX_SYSVDD_SEL_MASK              0x0040  /* AUX_SYSVDD_SEL */
-#define WM831X_AUX_SYSVDD_SEL_SHIFT                  6  /* AUX_SYSVDD_SEL */
-#define WM831X_AUX_SYSVDD_SEL_WIDTH                  1  /* AUX_SYSVDD_SEL */
-#define WM831X_AUX_BATT_TEMP_SEL                0x0020  /* AUX_BATT_TEMP_SEL */
-#define WM831X_AUX_BATT_TEMP_SEL_MASK           0x0020  /* AUX_BATT_TEMP_SEL */
-#define WM831X_AUX_BATT_TEMP_SEL_SHIFT               5  /* AUX_BATT_TEMP_SEL */
-#define WM831X_AUX_BATT_TEMP_SEL_WIDTH               1  /* AUX_BATT_TEMP_SEL */
-#define WM831X_AUX_CHIP_TEMP_SEL                0x0010  /* AUX_CHIP_TEMP_SEL */
-#define WM831X_AUX_CHIP_TEMP_SEL_MASK           0x0010  /* AUX_CHIP_TEMP_SEL */
-#define WM831X_AUX_CHIP_TEMP_SEL_SHIFT               4  /* AUX_CHIP_TEMP_SEL */
-#define WM831X_AUX_CHIP_TEMP_SEL_WIDTH               1  /* AUX_CHIP_TEMP_SEL */
-#define WM831X_AUX_AUX4_SEL                     0x0008  /* AUX_AUX4_SEL */
-#define WM831X_AUX_AUX4_SEL_MASK                0x0008  /* AUX_AUX4_SEL */
-#define WM831X_AUX_AUX4_SEL_SHIFT                    3  /* AUX_AUX4_SEL */
-#define WM831X_AUX_AUX4_SEL_WIDTH                    1  /* AUX_AUX4_SEL */
-#define WM831X_AUX_AUX3_SEL                     0x0004  /* AUX_AUX3_SEL */
-#define WM831X_AUX_AUX3_SEL_MASK                0x0004  /* AUX_AUX3_SEL */
-#define WM831X_AUX_AUX3_SEL_SHIFT                    2  /* AUX_AUX3_SEL */
-#define WM831X_AUX_AUX3_SEL_WIDTH                    1  /* AUX_AUX3_SEL */
-#define WM831X_AUX_AUX2_SEL                     0x0002  /* AUX_AUX2_SEL */
-#define WM831X_AUX_AUX2_SEL_MASK                0x0002  /* AUX_AUX2_SEL */
-#define WM831X_AUX_AUX2_SEL_SHIFT                    1  /* AUX_AUX2_SEL */
-#define WM831X_AUX_AUX2_SEL_WIDTH                    1  /* AUX_AUX2_SEL */
-#define WM831X_AUX_AUX1_SEL                     0x0001  /* AUX_AUX1_SEL */
-#define WM831X_AUX_AUX1_SEL_MASK                0x0001  /* AUX_AUX1_SEL */
-#define WM831X_AUX_AUX1_SEL_SHIFT                    0  /* AUX_AUX1_SEL */
-#define WM831X_AUX_AUX1_SEL_WIDTH                    1  /* AUX_AUX1_SEL */
-
-/*
- * R16432 (0x4030) - Comparator Control
- */
-#define WM831X_DCOMP4_STS                       0x0800  /* DCOMP4_STS */
-#define WM831X_DCOMP4_STS_MASK                  0x0800  /* DCOMP4_STS */
-#define WM831X_DCOMP4_STS_SHIFT                     11  /* DCOMP4_STS */
-#define WM831X_DCOMP4_STS_WIDTH                      1  /* DCOMP4_STS */
-#define WM831X_DCOMP3_STS                       0x0400  /* DCOMP3_STS */
-#define WM831X_DCOMP3_STS_MASK                  0x0400  /* DCOMP3_STS */
-#define WM831X_DCOMP3_STS_SHIFT                     10  /* DCOMP3_STS */
-#define WM831X_DCOMP3_STS_WIDTH                      1  /* DCOMP3_STS */
-#define WM831X_DCOMP2_STS                       0x0200  /* DCOMP2_STS */
-#define WM831X_DCOMP2_STS_MASK                  0x0200  /* DCOMP2_STS */
-#define WM831X_DCOMP2_STS_SHIFT                      9  /* DCOMP2_STS */
-#define WM831X_DCOMP2_STS_WIDTH                      1  /* DCOMP2_STS */
-#define WM831X_DCOMP1_STS                       0x0100  /* DCOMP1_STS */
-#define WM831X_DCOMP1_STS_MASK                  0x0100  /* DCOMP1_STS */
-#define WM831X_DCOMP1_STS_SHIFT                      8  /* DCOMP1_STS */
-#define WM831X_DCOMP1_STS_WIDTH                      1  /* DCOMP1_STS */
-#define WM831X_DCMP4_ENA                        0x0008  /* DCMP4_ENA */
-#define WM831X_DCMP4_ENA_MASK                   0x0008  /* DCMP4_ENA */
-#define WM831X_DCMP4_ENA_SHIFT                       3  /* DCMP4_ENA */
-#define WM831X_DCMP4_ENA_WIDTH                       1  /* DCMP4_ENA */
-#define WM831X_DCMP3_ENA                        0x0004  /* DCMP3_ENA */
-#define WM831X_DCMP3_ENA_MASK                   0x0004  /* DCMP3_ENA */
-#define WM831X_DCMP3_ENA_SHIFT                       2  /* DCMP3_ENA */
-#define WM831X_DCMP3_ENA_WIDTH                       1  /* DCMP3_ENA */
-#define WM831X_DCMP2_ENA                        0x0002  /* DCMP2_ENA */
-#define WM831X_DCMP2_ENA_MASK                   0x0002  /* DCMP2_ENA */
-#define WM831X_DCMP2_ENA_SHIFT                       1  /* DCMP2_ENA */
-#define WM831X_DCMP2_ENA_WIDTH                       1  /* DCMP2_ENA */
-#define WM831X_DCMP1_ENA                        0x0001  /* DCMP1_ENA */
-#define WM831X_DCMP1_ENA_MASK                   0x0001  /* DCMP1_ENA */
-#define WM831X_DCMP1_ENA_SHIFT                       0  /* DCMP1_ENA */
-#define WM831X_DCMP1_ENA_WIDTH                       1  /* DCMP1_ENA */
-
-/*
- * R16433 (0x4031) - Comparator 1
- */
-#define WM831X_DCMP1_SRC_MASK                   0xE000  /* DCMP1_SRC - [15:13] */
-#define WM831X_DCMP1_SRC_SHIFT                      13  /* DCMP1_SRC - [15:13] */
-#define WM831X_DCMP1_SRC_WIDTH                       3  /* DCMP1_SRC - [15:13] */
-#define WM831X_DCMP1_GT                         0x1000  /* DCMP1_GT */
-#define WM831X_DCMP1_GT_MASK                    0x1000  /* DCMP1_GT */
-#define WM831X_DCMP1_GT_SHIFT                       12  /* DCMP1_GT */
-#define WM831X_DCMP1_GT_WIDTH                        1  /* DCMP1_GT */
-#define WM831X_DCMP1_THR_MASK                   0x0FFF  /* DCMP1_THR - [11:0] */
-#define WM831X_DCMP1_THR_SHIFT                       0  /* DCMP1_THR - [11:0] */
-#define WM831X_DCMP1_THR_WIDTH                      12  /* DCMP1_THR - [11:0] */
-
-/*
- * R16434 (0x4032) - Comparator 2
- */
-#define WM831X_DCMP2_SRC_MASK                   0xE000  /* DCMP2_SRC - [15:13] */
-#define WM831X_DCMP2_SRC_SHIFT                      13  /* DCMP2_SRC - [15:13] */
-#define WM831X_DCMP2_SRC_WIDTH                       3  /* DCMP2_SRC - [15:13] */
-#define WM831X_DCMP2_GT                         0x1000  /* DCMP2_GT */
-#define WM831X_DCMP2_GT_MASK                    0x1000  /* DCMP2_GT */
-#define WM831X_DCMP2_GT_SHIFT                       12  /* DCMP2_GT */
-#define WM831X_DCMP2_GT_WIDTH                        1  /* DCMP2_GT */
-#define WM831X_DCMP2_THR_MASK                   0x0FFF  /* DCMP2_THR - [11:0] */
-#define WM831X_DCMP2_THR_SHIFT                       0  /* DCMP2_THR - [11:0] */
-#define WM831X_DCMP2_THR_WIDTH                      12  /* DCMP2_THR - [11:0] */
-
-/*
- * R16435 (0x4033) - Comparator 3
- */
-#define WM831X_DCMP3_SRC_MASK                   0xE000  /* DCMP3_SRC - [15:13] */
-#define WM831X_DCMP3_SRC_SHIFT                      13  /* DCMP3_SRC - [15:13] */
-#define WM831X_DCMP3_SRC_WIDTH                       3  /* DCMP3_SRC - [15:13] */
-#define WM831X_DCMP3_GT                         0x1000  /* DCMP3_GT */
-#define WM831X_DCMP3_GT_MASK                    0x1000  /* DCMP3_GT */
-#define WM831X_DCMP3_GT_SHIFT                       12  /* DCMP3_GT */
-#define WM831X_DCMP3_GT_WIDTH                        1  /* DCMP3_GT */
-#define WM831X_DCMP3_THR_MASK                   0x0FFF  /* DCMP3_THR - [11:0] */
-#define WM831X_DCMP3_THR_SHIFT                       0  /* DCMP3_THR - [11:0] */
-#define WM831X_DCMP3_THR_WIDTH                      12  /* DCMP3_THR - [11:0] */
-
-/*
- * R16436 (0x4034) - Comparator 4
- */
-#define WM831X_DCMP4_SRC_MASK                   0xE000  /* DCMP4_SRC - [15:13] */
-#define WM831X_DCMP4_SRC_SHIFT                      13  /* DCMP4_SRC - [15:13] */
-#define WM831X_DCMP4_SRC_WIDTH                       3  /* DCMP4_SRC - [15:13] */
-#define WM831X_DCMP4_GT                         0x1000  /* DCMP4_GT */
-#define WM831X_DCMP4_GT_MASK                    0x1000  /* DCMP4_GT */
-#define WM831X_DCMP4_GT_SHIFT                       12  /* DCMP4_GT */
-#define WM831X_DCMP4_GT_WIDTH                        1  /* DCMP4_GT */
-#define WM831X_DCMP4_THR_MASK                   0x0FFF  /* DCMP4_THR - [11:0] */
-#define WM831X_DCMP4_THR_SHIFT                       0  /* DCMP4_THR - [11:0] */
-#define WM831X_DCMP4_THR_WIDTH                      12  /* DCMP4_THR - [11:0] */
-
-#define WM831X_AUX_CAL_FACTOR  0xfff
-#define WM831X_AUX_CAL_NOMINAL 0x222
-
-enum wm831x_auxadc {
-	WM831X_AUX_CAL = 15,
-	WM831X_AUX_BKUP_BATT = 10,
-	WM831X_AUX_WALL = 9,
-	WM831X_AUX_BATT = 8,
-	WM831X_AUX_USB = 7,
-	WM831X_AUX_SYSVDD = 6,
-	WM831X_AUX_BATT_TEMP = 5,
-	WM831X_AUX_CHIP_TEMP = 4,
-	WM831X_AUX_AUX4 = 3,
-	WM831X_AUX_AUX3 = 2,
-	WM831X_AUX_AUX2 = 1,
-	WM831X_AUX_AUX1 = 0,
-};
-
-int wm831x_auxadc_read(struct wm831x *wm831x, enum wm831x_auxadc input);
-int wm831x_auxadc_read_uv(struct wm831x *wm831x, enum wm831x_auxadc input);
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/mfd/wm831x/core.h b/ANDROID_3.4.5/include/linux/mfd/wm831x/core.h
deleted file mode 100644
index 4b121185..00000000
--- a/ANDROID_3.4.5/include/linux/mfd/wm831x/core.h
+++ /dev/null
@@ -1,422 +0,0 @@
-/*
- * include/linux/mfd/wm831x/core.h -- Core interface for WM831x
- *
- * Copyright 2009 Wolfson Microelectronics PLC.
- *
- * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- */
-
-#ifndef __MFD_WM831X_CORE_H__
-#define __MFD_WM831X_CORE_H__
-
-#include <linux/completion.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/regmap.h>
-
-/*
- * Register values.
- */
-#define WM831X_RESET_ID                         0x00
-#define WM831X_REVISION                         0x01
-#define WM831X_PARENT_ID                        0x4000
-#define WM831X_SYSVDD_CONTROL                   0x4001
-#define WM831X_THERMAL_MONITORING               0x4002
-#define WM831X_POWER_STATE                      0x4003
-#define WM831X_WATCHDOG                         0x4004
-#define WM831X_ON_PIN_CONTROL                   0x4005
-#define WM831X_RESET_CONTROL                    0x4006
-#define WM831X_CONTROL_INTERFACE                0x4007
-#define WM831X_SECURITY_KEY                     0x4008
-#define WM831X_SOFTWARE_SCRATCH                 0x4009
-#define WM831X_OTP_CONTROL                      0x400A
-#define WM831X_GPIO_LEVEL                       0x400C
-#define WM831X_SYSTEM_STATUS                    0x400D
-#define WM831X_ON_SOURCE                        0x400E
-#define WM831X_OFF_SOURCE                       0x400F
-#define WM831X_SYSTEM_INTERRUPTS                0x4010
-#define WM831X_INTERRUPT_STATUS_1               0x4011
-#define WM831X_INTERRUPT_STATUS_2               0x4012
-#define WM831X_INTERRUPT_STATUS_3               0x4013
-#define WM831X_INTERRUPT_STATUS_4               0x4014
-#define WM831X_INTERRUPT_STATUS_5               0x4015
-#define WM831X_IRQ_CONFIG                       0x4017
-#define WM831X_SYSTEM_INTERRUPTS_MASK           0x4018
-#define WM831X_INTERRUPT_STATUS_1_MASK          0x4019
-#define WM831X_INTERRUPT_STATUS_2_MASK          0x401A
-#define WM831X_INTERRUPT_STATUS_3_MASK          0x401B
-#define WM831X_INTERRUPT_STATUS_4_MASK          0x401C
-#define WM831X_INTERRUPT_STATUS_5_MASK          0x401D
-#define WM831X_RTC_WRITE_COUNTER                0x4020
-#define WM831X_RTC_TIME_1                       0x4021
-#define WM831X_RTC_TIME_2                       0x4022
-#define WM831X_RTC_ALARM_1                      0x4023
-#define WM831X_RTC_ALARM_2                      0x4024
-#define WM831X_RTC_CONTROL                      0x4025
-#define WM831X_RTC_TRIM                         0x4026
-#define WM831X_TOUCH_CONTROL_1                  0x4028
-#define WM831X_TOUCH_CONTROL_2                  0x4029
-#define WM831X_TOUCH_DATA_X                     0x402A
-#define WM831X_TOUCH_DATA_Y                     0x402B
-#define WM831X_TOUCH_DATA_Z                     0x402C
-#define WM831X_AUXADC_DATA                      0x402D
-#define WM831X_AUXADC_CONTROL                   0x402E
-#define WM831X_AUXADC_SOURCE                    0x402F
-#define WM831X_COMPARATOR_CONTROL               0x4030
-#define WM831X_COMPARATOR_1                     0x4031
-#define WM831X_COMPARATOR_2                     0x4032
-#define WM831X_COMPARATOR_3                     0x4033
-#define WM831X_COMPARATOR_4                     0x4034
-#define WM831X_GPIO1_CONTROL                    0x4038
-#define WM831X_GPIO2_CONTROL                    0x4039
-#define WM831X_GPIO3_CONTROL                    0x403A
-#define WM831X_GPIO4_CONTROL                    0x403B
-#define WM831X_GPIO5_CONTROL                    0x403C
-#define WM831X_GPIO6_CONTROL                    0x403D
-#define WM831X_GPIO7_CONTROL                    0x403E
-#define WM831X_GPIO8_CONTROL                    0x403F
-#define WM831X_GPIO9_CONTROL                    0x4040
-#define WM831X_GPIO10_CONTROL                   0x4041
-#define WM831X_GPIO11_CONTROL                   0x4042
-#define WM831X_GPIO12_CONTROL                   0x4043
-#define WM831X_GPIO13_CONTROL                   0x4044
-#define WM831X_GPIO14_CONTROL                   0x4045
-#define WM831X_GPIO15_CONTROL                   0x4046
-#define WM831X_GPIO16_CONTROL                   0x4047
-#define WM831X_CHARGER_CONTROL_1                0x4048
-#define WM831X_CHARGER_CONTROL_2                0x4049
-#define WM831X_CHARGER_STATUS                   0x404A
-#define WM831X_BACKUP_CHARGER_CONTROL           0x404B
-#define WM831X_STATUS_LED_1                     0x404C
-#define WM831X_STATUS_LED_2                     0x404D
-#define WM831X_CURRENT_SINK_1                   0x404E
-#define WM831X_CURRENT_SINK_2                   0x404F
-#define WM831X_DCDC_ENABLE                      0x4050
-#define WM831X_LDO_ENABLE                       0x4051
-#define WM831X_DCDC_STATUS                      0x4052
-#define WM831X_LDO_STATUS                       0x4053
-#define WM831X_DCDC_UV_STATUS                   0x4054
-#define WM831X_LDO_UV_STATUS                    0x4055
-#define WM831X_DC1_CONTROL_1                    0x4056
-#define WM831X_DC1_CONTROL_2                    0x4057
-#define WM831X_DC1_ON_CONFIG                    0x4058
-#define WM831X_DC1_SLEEP_CONTROL                0x4059
-#define WM831X_DC1_DVS_CONTROL                  0x405A
-#define WM831X_DC2_CONTROL_1                    0x405B
-#define WM831X_DC2_CONTROL_2                    0x405C
-#define WM831X_DC2_ON_CONFIG                    0x405D
-#define WM831X_DC2_SLEEP_CONTROL                0x405E
-#define WM831X_DC2_DVS_CONTROL                  0x405F
-#define WM831X_DC3_CONTROL_1                    0x4060
-#define WM831X_DC3_CONTROL_2                    0x4061
-#define WM831X_DC3_ON_CONFIG                    0x4062
-#define WM831X_DC3_SLEEP_CONTROL                0x4063
-#define WM831X_DC4_CONTROL                      0x4064
-#define WM831X_DC4_SLEEP_CONTROL                0x4065
-#define WM832X_DC4_SLEEP_CONTROL                0x4067
-#define WM831X_EPE1_CONTROL                     0x4066
-#define WM831X_EPE2_CONTROL                     0x4067
-#define WM831X_LDO1_CONTROL                     0x4068
-#define WM831X_LDO1_ON_CONTROL                  0x4069
-#define WM831X_LDO1_SLEEP_CONTROL               0x406A
-#define WM831X_LDO2_CONTROL                     0x406B
-#define WM831X_LDO2_ON_CONTROL                  0x406C
-#define WM831X_LDO2_SLEEP_CONTROL               0x406D
-#define WM831X_LDO3_CONTROL                     0x406E
-#define WM831X_LDO3_ON_CONTROL                  0x406F
-#define WM831X_LDO3_SLEEP_CONTROL               0x4070
-#define WM831X_LDO4_CONTROL                     0x4071
-#define WM831X_LDO4_ON_CONTROL                  0x4072
-#define WM831X_LDO4_SLEEP_CONTROL               0x4073
-#define WM831X_LDO5_CONTROL                     0x4074
-#define WM831X_LDO5_ON_CONTROL                  0x4075
-#define WM831X_LDO5_SLEEP_CONTROL               0x4076
-#define WM831X_LDO6_CONTROL                     0x4077
-#define WM831X_LDO6_ON_CONTROL                  0x4078
-#define WM831X_LDO6_SLEEP_CONTROL               0x4079
-#define WM831X_LDO7_CONTROL                     0x407A
-#define WM831X_LDO7_ON_CONTROL                  0x407B
-#define WM831X_LDO7_SLEEP_CONTROL               0x407C
-#define WM831X_LDO8_CONTROL                     0x407D
-#define WM831X_LDO8_ON_CONTROL                  0x407E
-#define WM831X_LDO8_SLEEP_CONTROL               0x407F
-#define WM831X_LDO9_CONTROL                     0x4080
-#define WM831X_LDO9_ON_CONTROL                  0x4081
-#define WM831X_LDO9_SLEEP_CONTROL               0x4082
-#define WM831X_LDO10_CONTROL                    0x4083
-#define WM831X_LDO10_ON_CONTROL                 0x4084
-#define WM831X_LDO10_SLEEP_CONTROL              0x4085
-#define WM831X_LDO11_ON_CONTROL                 0x4087
-#define WM831X_LDO11_SLEEP_CONTROL              0x4088
-#define WM831X_POWER_GOOD_SOURCE_1              0x408E
-#define WM831X_POWER_GOOD_SOURCE_2              0x408F
-#define WM831X_CLOCK_CONTROL_1                  0x4090
-#define WM831X_CLOCK_CONTROL_2                  0x4091
-#define WM831X_FLL_CONTROL_1                    0x4092
-#define WM831X_FLL_CONTROL_2                    0x4093
-#define WM831X_FLL_CONTROL_3                    0x4094
-#define WM831X_FLL_CONTROL_4                    0x4095
-#define WM831X_FLL_CONTROL_5                    0x4096
-#define WM831X_UNIQUE_ID_1                      0x7800
-#define WM831X_UNIQUE_ID_2                      0x7801
-#define WM831X_UNIQUE_ID_3                      0x7802
-#define WM831X_UNIQUE_ID_4                      0x7803
-#define WM831X_UNIQUE_ID_5                      0x7804
-#define WM831X_UNIQUE_ID_6                      0x7805
-#define WM831X_UNIQUE_ID_7                      0x7806
-#define WM831X_UNIQUE_ID_8                      0x7807
-#define WM831X_FACTORY_OTP_ID                   0x7808
-#define WM831X_FACTORY_OTP_1                    0x7809
-#define WM831X_FACTORY_OTP_2                    0x780A
-#define WM831X_FACTORY_OTP_3                    0x780B
-#define WM831X_FACTORY_OTP_4                    0x780C
-#define WM831X_FACTORY_OTP_5                    0x780D
-#define WM831X_CUSTOMER_OTP_ID                  0x7810
-#define WM831X_DC1_OTP_CONTROL                  0x7811
-#define WM831X_DC2_OTP_CONTROL                  0x7812
-#define WM831X_DC3_OTP_CONTROL                  0x7813
-#define WM831X_LDO1_2_OTP_CONTROL               0x7814
-#define WM831X_LDO3_4_OTP_CONTROL               0x7815
-#define WM831X_LDO5_6_OTP_CONTROL               0x7816
-#define WM831X_LDO7_8_OTP_CONTROL               0x7817
-#define WM831X_LDO9_10_OTP_CONTROL              0x7818
-#define WM831X_LDO11_EPE_CONTROL                0x7819
-#define WM831X_GPIO1_OTP_CONTROL                0x781A
-#define WM831X_GPIO2_OTP_CONTROL                0x781B
-#define WM831X_GPIO3_OTP_CONTROL                0x781C
-#define WM831X_GPIO4_OTP_CONTROL                0x781D
-#define WM831X_GPIO5_OTP_CONTROL                0x781E
-#define WM831X_GPIO6_OTP_CONTROL                0x781F
-#define WM831X_DBE_CHECK_DATA                   0x7827
-
-/*
- * R0 (0x00) - Reset ID
- */
-#define WM831X_CHIP_ID_MASK                     0xFFFF  /* CHIP_ID - [15:0] */
-#define WM831X_CHIP_ID_SHIFT                         0  /* CHIP_ID - [15:0] */
-#define WM831X_CHIP_ID_WIDTH                        16  /* CHIP_ID - [15:0] */
-
-/*
- * R1 (0x01) - Revision
- */
-#define WM831X_PARENT_REV_MASK                  0xFF00  /* PARENT_REV - [15:8] */
-#define WM831X_PARENT_REV_SHIFT                      8  /* PARENT_REV - [15:8] */
-#define WM831X_PARENT_REV_WIDTH                      8  /* PARENT_REV - [15:8] */
-#define WM831X_CHILD_REV_MASK                   0x00FF  /* CHILD_REV - [7:0] */
-#define WM831X_CHILD_REV_SHIFT                       0  /* CHILD_REV - [7:0] */
-#define WM831X_CHILD_REV_WIDTH                       8  /* CHILD_REV - [7:0] */
-
-/*
- * R16384 (0x4000) - Parent ID
- */
-#define WM831X_PARENT_ID_MASK                   0xFFFF  /* PARENT_ID - [15:0] */
-#define WM831X_PARENT_ID_SHIFT                       0  /* PARENT_ID - [15:0] */
-#define WM831X_PARENT_ID_WIDTH                      16  /* PARENT_ID - [15:0] */
-
-/*
- * R16389 (0x4005) - ON Pin Control
- */
-#define WM831X_ON_PIN_SECACT_MASK               0x0300  /* ON_PIN_SECACT - [9:8] */
-#define WM831X_ON_PIN_SECACT_SHIFT                   8  /* ON_PIN_SECACT - [9:8] */
-#define WM831X_ON_PIN_SECACT_WIDTH                   2  /* ON_PIN_SECACT - [9:8] */
-#define WM831X_ON_PIN_PRIMACT_MASK              0x0030  /* ON_PIN_PRIMACT - [5:4] */
-#define WM831X_ON_PIN_PRIMACT_SHIFT                  4  /* ON_PIN_PRIMACT - [5:4] */
-#define WM831X_ON_PIN_PRIMACT_WIDTH                  2  /* ON_PIN_PRIMACT - [5:4] */
-#define WM831X_ON_PIN_STS                       0x0008  /* ON_PIN_STS */
-#define WM831X_ON_PIN_STS_MASK                  0x0008  /* ON_PIN_STS */
-#define WM831X_ON_PIN_STS_SHIFT                      3  /* ON_PIN_STS */
-#define WM831X_ON_PIN_STS_WIDTH                      1  /* ON_PIN_STS */
-#define WM831X_ON_PIN_TO_MASK                   0x0003  /* ON_PIN_TO - [1:0] */
-#define WM831X_ON_PIN_TO_SHIFT                       0  /* ON_PIN_TO - [1:0] */
-#define WM831X_ON_PIN_TO_WIDTH                       2  /* ON_PIN_TO - [1:0] */
-
-/*
- * R16528 (0x4090) - Clock Control 1
- */
-#define WM831X_CLKOUT_ENA                       0x8000  /* CLKOUT_ENA */
-#define WM831X_CLKOUT_ENA_MASK                  0x8000  /* CLKOUT_ENA */
-#define WM831X_CLKOUT_ENA_SHIFT                     15  /* CLKOUT_ENA */
-#define WM831X_CLKOUT_ENA_WIDTH                      1  /* CLKOUT_ENA */
-#define WM831X_CLKOUT_OD                        0x2000  /* CLKOUT_OD */
-#define WM831X_CLKOUT_OD_MASK                   0x2000  /* CLKOUT_OD */
-#define WM831X_CLKOUT_OD_SHIFT                      13  /* CLKOUT_OD */
-#define WM831X_CLKOUT_OD_WIDTH                       1  /* CLKOUT_OD */
-#define WM831X_CLKOUT_SLOT_MASK                 0x0700  /* CLKOUT_SLOT - [10:8] */
-#define WM831X_CLKOUT_SLOT_SHIFT                     8  /* CLKOUT_SLOT - [10:8] */
-#define WM831X_CLKOUT_SLOT_WIDTH                     3  /* CLKOUT_SLOT - [10:8] */
-#define WM831X_CLKOUT_SLPSLOT_MASK              0x0070  /* CLKOUT_SLPSLOT - [6:4] */
-#define WM831X_CLKOUT_SLPSLOT_SHIFT                  4  /* CLKOUT_SLPSLOT - [6:4] */
-#define WM831X_CLKOUT_SLPSLOT_WIDTH                  3  /* CLKOUT_SLPSLOT - [6:4] */
-#define WM831X_CLKOUT_SRC                       0x0001  /* CLKOUT_SRC */
-#define WM831X_CLKOUT_SRC_MASK                  0x0001  /* CLKOUT_SRC */
-#define WM831X_CLKOUT_SRC_SHIFT                      0  /* CLKOUT_SRC */
-#define WM831X_CLKOUT_SRC_WIDTH                      1  /* CLKOUT_SRC */
-
-/*
- * R16529 (0x4091) - Clock Control 2
- */
-#define WM831X_XTAL_INH                         0x8000  /* XTAL_INH */
-#define WM831X_XTAL_INH_MASK                    0x8000  /* XTAL_INH */
-#define WM831X_XTAL_INH_SHIFT                       15  /* XTAL_INH */
-#define WM831X_XTAL_INH_WIDTH                        1  /* XTAL_INH */
-#define WM831X_XTAL_ENA                         0x2000  /* XTAL_ENA */
-#define WM831X_XTAL_ENA_MASK                    0x2000  /* XTAL_ENA */
-#define WM831X_XTAL_ENA_SHIFT                       13  /* XTAL_ENA */
-#define WM831X_XTAL_ENA_WIDTH                        1  /* XTAL_ENA */
-#define WM831X_XTAL_BKUPENA                     0x1000  /* XTAL_BKUPENA */
-#define WM831X_XTAL_BKUPENA_MASK                0x1000  /* XTAL_BKUPENA */
-#define WM831X_XTAL_BKUPENA_SHIFT                   12  /* XTAL_BKUPENA */
-#define WM831X_XTAL_BKUPENA_WIDTH                    1  /* XTAL_BKUPENA */
-#define WM831X_FLL_AUTO                         0x0080  /* FLL_AUTO */
-#define WM831X_FLL_AUTO_MASK                    0x0080  /* FLL_AUTO */
-#define WM831X_FLL_AUTO_SHIFT                        7  /* FLL_AUTO */
-#define WM831X_FLL_AUTO_WIDTH                        1  /* FLL_AUTO */
-#define WM831X_FLL_AUTO_FREQ_MASK               0x0007  /* FLL_AUTO_FREQ - [2:0] */
-#define WM831X_FLL_AUTO_FREQ_SHIFT                   0  /* FLL_AUTO_FREQ - [2:0] */
-#define WM831X_FLL_AUTO_FREQ_WIDTH                   3  /* FLL_AUTO_FREQ - [2:0] */
-
-/*
- * R16530 (0x4092) - FLL Control 1
- */
-#define WM831X_FLL_FRAC                         0x0004  /* FLL_FRAC */
-#define WM831X_FLL_FRAC_MASK                    0x0004  /* FLL_FRAC */
-#define WM831X_FLL_FRAC_SHIFT                        2  /* FLL_FRAC */
-#define WM831X_FLL_FRAC_WIDTH                        1  /* FLL_FRAC */
-#define WM831X_FLL_OSC_ENA                      0x0002  /* FLL_OSC_ENA */
-#define WM831X_FLL_OSC_ENA_MASK                 0x0002  /* FLL_OSC_ENA */
-#define WM831X_FLL_OSC_ENA_SHIFT                     1  /* FLL_OSC_ENA */
-#define WM831X_FLL_OSC_ENA_WIDTH                     1  /* FLL_OSC_ENA */
-#define WM831X_FLL_ENA                          0x0001  /* FLL_ENA */
-#define WM831X_FLL_ENA_MASK                     0x0001  /* FLL_ENA */
-#define WM831X_FLL_ENA_SHIFT                         0  /* FLL_ENA */
-#define WM831X_FLL_ENA_WIDTH                         1  /* FLL_ENA */
-
-/*
- * R16531 (0x4093) - FLL Control 2
- */
-#define WM831X_FLL_OUTDIV_MASK                  0x3F00  /* FLL_OUTDIV - [13:8] */
-#define WM831X_FLL_OUTDIV_SHIFT                      8  /* FLL_OUTDIV - [13:8] */
-#define WM831X_FLL_OUTDIV_WIDTH                      6  /* FLL_OUTDIV - [13:8] */
-#define WM831X_FLL_CTRL_RATE_MASK               0x0070  /* FLL_CTRL_RATE - [6:4] */
-#define WM831X_FLL_CTRL_RATE_SHIFT                   4  /* FLL_CTRL_RATE - [6:4] */
-#define WM831X_FLL_CTRL_RATE_WIDTH                   3  /* FLL_CTRL_RATE - [6:4] */
-#define WM831X_FLL_FRATIO_MASK                  0x0007  /* FLL_FRATIO - [2:0] */
-#define WM831X_FLL_FRATIO_SHIFT                      0  /* FLL_FRATIO - [2:0] */
-#define WM831X_FLL_FRATIO_WIDTH                      3  /* FLL_FRATIO - [2:0] */
-
-/*
- * R16532 (0x4094) - FLL Control 3
- */
-#define WM831X_FLL_K_MASK                       0xFFFF  /* FLL_K - [15:0] */
-#define WM831X_FLL_K_SHIFT                           0  /* FLL_K - [15:0] */
-#define WM831X_FLL_K_WIDTH                          16  /* FLL_K - [15:0] */
-
-/*
- * R16533 (0x4095) - FLL Control 4
- */
-#define WM831X_FLL_N_MASK                       0x7FE0  /* FLL_N - [14:5] */
-#define WM831X_FLL_N_SHIFT                           5  /* FLL_N - [14:5] */
-#define WM831X_FLL_N_WIDTH                          10  /* FLL_N - [14:5] */
-#define WM831X_FLL_GAIN_MASK                    0x000F  /* FLL_GAIN - [3:0] */
-#define WM831X_FLL_GAIN_SHIFT                        0  /* FLL_GAIN - [3:0] */
-#define WM831X_FLL_GAIN_WIDTH                        4  /* FLL_GAIN - [3:0] */
-
-/*
- * R16534 (0x4096) - FLL Control 5
- */
-#define WM831X_FLL_CLK_REF_DIV_MASK             0x0018  /* FLL_CLK_REF_DIV - [4:3] */
-#define WM831X_FLL_CLK_REF_DIV_SHIFT                 3  /* FLL_CLK_REF_DIV - [4:3] */
-#define WM831X_FLL_CLK_REF_DIV_WIDTH                 2  /* FLL_CLK_REF_DIV - [4:3] */
-#define WM831X_FLL_CLK_SRC_MASK                 0x0003  /* FLL_CLK_SRC - [1:0] */
-#define WM831X_FLL_CLK_SRC_SHIFT                     0  /* FLL_CLK_SRC - [1:0] */
-#define WM831X_FLL_CLK_SRC_WIDTH                     2  /* FLL_CLK_SRC - [1:0] */
-
-struct regulator_dev;
-
-#define WM831X_NUM_IRQ_REGS 5
-#define WM831X_NUM_GPIO_REGS 16
-
-enum wm831x_parent {
-	WM8310 = 0x8310,
-	WM8311 = 0x8311,
-	WM8312 = 0x8312,
-	WM8320 = 0x8320,
-	WM8321 = 0x8321,
-	WM8325 = 0x8325,
-	WM8326 = 0x8326,
-};
-
-struct wm831x;
-enum wm831x_auxadc;
-
-typedef int (*wm831x_auxadc_read_fn)(struct wm831x *wm831x,
-				     enum wm831x_auxadc input);
-
-struct wm831x {
-	struct mutex io_lock;
-
-	struct device *dev;
-
-	struct regmap *regmap;
-
-	int irq;  /* Our chip IRQ */
-	struct mutex irq_lock;
-	int irq_base;
-	int irq_masks_cur[WM831X_NUM_IRQ_REGS];   /* Currently active value */
-	int irq_masks_cache[WM831X_NUM_IRQ_REGS]; /* Cached hardware value */
-
-	bool soft_shutdown;
-
-	/* Chip revision based flags */
-	unsigned has_gpio_ena:1;         /* Has GPIO enable bit */
-	unsigned has_cs_sts:1;           /* Has current sink status bit */
-	unsigned charger_irq_wake:1;     /* Are charger IRQs a wake source? */
-
-	int num_gpio;
-
-	/* Used by the interrupt controller code to post writes */
-	int gpio_update[WM831X_NUM_GPIO_REGS];
-	bool gpio_level[WM831X_NUM_GPIO_REGS];
-
-	struct mutex auxadc_lock;
-	struct list_head auxadc_pending;
-	u16 auxadc_active;
-	wm831x_auxadc_read_fn auxadc_read;
-
-	/* The WM831x has a security key blocking access to certain
-	 * registers.  The mutex is taken by the accessors for locking
-	 * and unlocking the security key, locked is used to fail
-	 * writes if the lock is held.
-	 */
-	struct mutex key_lock;
-	unsigned int locked:1;
-};
-
-/* Device I/O API */
-int wm831x_reg_read(struct wm831x *wm831x, unsigned short reg);
-int wm831x_reg_write(struct wm831x *wm831x, unsigned short reg,
-		 unsigned short val);
-void wm831x_reg_lock(struct wm831x *wm831x);
-int wm831x_reg_unlock(struct wm831x *wm831x);
-int wm831x_set_bits(struct wm831x *wm831x, unsigned short reg,
-		    unsigned short mask, unsigned short val);
-int wm831x_bulk_read(struct wm831x *wm831x, unsigned short reg,
-		     int count, u16 *buf);
-
-int wm831x_device_init(struct wm831x *wm831x, unsigned long id, int irq);
-void wm831x_device_exit(struct wm831x *wm831x);
-int wm831x_device_suspend(struct wm831x *wm831x);
-void wm831x_device_shutdown(struct wm831x *wm831x);
-int wm831x_irq_init(struct wm831x *wm831x, int irq);
-void wm831x_irq_exit(struct wm831x *wm831x);
-void wm831x_auxadc_init(struct wm831x *wm831x);
-
-extern struct regmap_config wm831x_regmap_config;
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/mfd/wm831x/gpio.h b/ANDROID_3.4.5/include/linux/mfd/wm831x/gpio.h
deleted file mode 100644
index 9b163c58..00000000
--- a/ANDROID_3.4.5/include/linux/mfd/wm831x/gpio.h
+++ /dev/null
@@ -1,59 +0,0 @@
-/*
- * include/linux/mfd/wm831x/gpio.h -- GPIO for WM831x
- *
- * Copyright 2009 Wolfson Microelectronics PLC.
- *
- * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- */
-
-#ifndef __MFD_WM831X_GPIO_H__
-#define __MFD_WM831X_GPIO_H__
-
-/*
- * R16440-16455 (0x4038-0x4047) - GPIOx Control
- */
-#define WM831X_GPN_DIR                          0x8000  /* GPN_DIR */
-#define WM831X_GPN_DIR_MASK                     0x8000  /* GPN_DIR */
-#define WM831X_GPN_DIR_SHIFT                        15  /* GPN_DIR */
-#define WM831X_GPN_DIR_WIDTH                         1  /* GPN_DIR */
-#define WM831X_GPN_PULL_MASK                    0x6000  /* GPN_PULL - [14:13] */
-#define WM831X_GPN_PULL_SHIFT                       13  /* GPN_PULL - [14:13] */
-#define WM831X_GPN_PULL_WIDTH                        2  /* GPN_PULL - [14:13] */
-#define WM831X_GPN_INT_MODE                     0x1000  /* GPN_INT_MODE */
-#define WM831X_GPN_INT_MODE_MASK                0x1000  /* GPN_INT_MODE */
-#define WM831X_GPN_INT_MODE_SHIFT                   12  /* GPN_INT_MODE */
-#define WM831X_GPN_INT_MODE_WIDTH                    1  /* GPN_INT_MODE */
-#define WM831X_GPN_PWR_DOM                      0x0800  /* GPN_PWR_DOM */
-#define WM831X_GPN_PWR_DOM_MASK                 0x0800  /* GPN_PWR_DOM */
-#define WM831X_GPN_PWR_DOM_SHIFT                    11  /* GPN_PWR_DOM */
-#define WM831X_GPN_PWR_DOM_WIDTH                     1  /* GPN_PWR_DOM */
-#define WM831X_GPN_POL                          0x0400  /* GPN_POL */
-#define WM831X_GPN_POL_MASK                     0x0400  /* GPN_POL */
-#define WM831X_GPN_POL_SHIFT                        10  /* GPN_POL */
-#define WM831X_GPN_POL_WIDTH                         1  /* GPN_POL */
-#define WM831X_GPN_OD                           0x0200  /* GPN_OD */
-#define WM831X_GPN_OD_MASK                      0x0200  /* GPN_OD */
-#define WM831X_GPN_OD_SHIFT                          9  /* GPN_OD */
-#define WM831X_GPN_OD_WIDTH                          1  /* GPN_OD */
-#define WM831X_GPN_ENA                          0x0080  /* GPN_ENA */
-#define WM831X_GPN_ENA_MASK                     0x0080  /* GPN_ENA */
-#define WM831X_GPN_ENA_SHIFT                         7  /* GPN_ENA */
-#define WM831X_GPN_ENA_WIDTH                         1  /* GPN_ENA */
-#define WM831X_GPN_TRI                          0x0080  /* GPN_TRI */
-#define WM831X_GPN_TRI_MASK                     0x0080  /* GPN_TRI */
-#define WM831X_GPN_TRI_SHIFT                         7  /* GPN_TRI */
-#define WM831X_GPN_TRI_WIDTH                         1  /* GPN_TRI */
-#define WM831X_GPN_FN_MASK                      0x000F  /* GPN_FN - [3:0] */
-#define WM831X_GPN_FN_SHIFT                          0  /* GPN_FN - [3:0] */
-#define WM831X_GPN_FN_WIDTH                          4  /* GPN_FN - [3:0] */
-
-#define WM831X_GPIO_PULL_NONE (0 << WM831X_GPN_PULL_SHIFT)
-#define WM831X_GPIO_PULL_DOWN (1 << WM831X_GPN_PULL_SHIFT)
-#define WM831X_GPIO_PULL_UP   (2 << WM831X_GPN_PULL_SHIFT)
-#endif
diff --git a/ANDROID_3.4.5/include/linux/mfd/wm831x/irq.h b/ANDROID_3.4.5/include/linux/mfd/wm831x/irq.h
deleted file mode 100644
index 3a8c9765..00000000
--- a/ANDROID_3.4.5/include/linux/mfd/wm831x/irq.h
+++ /dev/null
@@ -1,764 +0,0 @@
-/*
- * include/linux/mfd/wm831x/irq.h -- Interrupt controller for WM831x
- *
- * Copyright 2009 Wolfson Microelectronics PLC.
- *
- * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- */
-
-#ifndef __MFD_WM831X_IRQ_H__
-#define __MFD_WM831X_IRQ_H__
-
-/* Interrupt number assignments within Linux */
-#define WM831X_IRQ_TEMP_THW 0
-#define WM831X_IRQ_GPIO_1   1
-#define WM831X_IRQ_GPIO_2   2
-#define WM831X_IRQ_GPIO_3   3
-#define WM831X_IRQ_GPIO_4   4
-#define WM831X_IRQ_GPIO_5   5
-#define WM831X_IRQ_GPIO_6   6
-#define WM831X_IRQ_GPIO_7   7
-#define WM831X_IRQ_GPIO_8   8
-#define WM831X_IRQ_GPIO_9   9
-#define WM831X_IRQ_GPIO_10  10
-#define WM831X_IRQ_GPIO_11  11
-#define WM831X_IRQ_GPIO_12  12
-#define WM831X_IRQ_GPIO_13  13
-#define WM831X_IRQ_GPIO_14  14
-#define WM831X_IRQ_GPIO_15  15
-#define WM831X_IRQ_GPIO_16  16
-#define WM831X_IRQ_ON           17
-#define WM831X_IRQ_PPM_SYSLO    18
-#define WM831X_IRQ_PPM_PWR_SRC  19
-#define WM831X_IRQ_PPM_USB_CURR 20
-#define WM831X_IRQ_WDOG_TO      21
-#define WM831X_IRQ_RTC_PER      22
-#define WM831X_IRQ_RTC_ALM      23
-#define WM831X_IRQ_CHG_BATT_HOT  24
-#define WM831X_IRQ_CHG_BATT_COLD 25
-#define WM831X_IRQ_CHG_BATT_FAIL 26
-#define WM831X_IRQ_CHG_OV        27
-#define WM831X_IRQ_CHG_END       29
-#define WM831X_IRQ_CHG_TO        30
-#define WM831X_IRQ_CHG_MODE      31
-#define WM831X_IRQ_CHG_START     32
-#define WM831X_IRQ_TCHDATA       33
-#define WM831X_IRQ_TCHPD         34
-#define WM831X_IRQ_AUXADC_DATA   35
-#define WM831X_IRQ_AUXADC_DCOMP1 36
-#define WM831X_IRQ_AUXADC_DCOMP2 37
-#define WM831X_IRQ_AUXADC_DCOMP3 38
-#define WM831X_IRQ_AUXADC_DCOMP4 39
-#define WM831X_IRQ_CS1           40
-#define WM831X_IRQ_CS2           41
-#define WM831X_IRQ_HC_DC1        42
-#define WM831X_IRQ_HC_DC2        43
-#define WM831X_IRQ_UV_LDO1       44
-#define WM831X_IRQ_UV_LDO2       45
-#define WM831X_IRQ_UV_LDO3       46
-#define WM831X_IRQ_UV_LDO4       47
-#define WM831X_IRQ_UV_LDO5       48
-#define WM831X_IRQ_UV_LDO6       49
-#define WM831X_IRQ_UV_LDO7       50
-#define WM831X_IRQ_UV_LDO8       51
-#define WM831X_IRQ_UV_LDO9       52
-#define WM831X_IRQ_UV_LDO10      53
-#define WM831X_IRQ_UV_DC1        54
-#define WM831X_IRQ_UV_DC2        55
-#define WM831X_IRQ_UV_DC3        56
-#define WM831X_IRQ_UV_DC4        57
-
-#define WM831X_NUM_IRQS     58
-
-/*
- * R16400 (0x4010) - System Interrupts
- */
-#define WM831X_PS_INT                           0x8000  /* PS_INT */
-#define WM831X_PS_INT_MASK                      0x8000  /* PS_INT */
-#define WM831X_PS_INT_SHIFT                         15  /* PS_INT */
-#define WM831X_PS_INT_WIDTH                          1  /* PS_INT */
-#define WM831X_TEMP_INT                         0x4000  /* TEMP_INT */
-#define WM831X_TEMP_INT_MASK                    0x4000  /* TEMP_INT */
-#define WM831X_TEMP_INT_SHIFT                       14  /* TEMP_INT */
-#define WM831X_TEMP_INT_WIDTH                        1  /* TEMP_INT */
-#define WM831X_GP_INT                           0x2000  /* GP_INT */
-#define WM831X_GP_INT_MASK                      0x2000  /* GP_INT */
-#define WM831X_GP_INT_SHIFT                         13  /* GP_INT */
-#define WM831X_GP_INT_WIDTH                          1  /* GP_INT */
-#define WM831X_ON_PIN_INT                       0x1000  /* ON_PIN_INT */
-#define WM831X_ON_PIN_INT_MASK                  0x1000  /* ON_PIN_INT */
-#define WM831X_ON_PIN_INT_SHIFT                     12  /* ON_PIN_INT */
-#define WM831X_ON_PIN_INT_WIDTH                      1  /* ON_PIN_INT */
-#define WM831X_WDOG_INT                         0x0800  /* WDOG_INT */
-#define WM831X_WDOG_INT_MASK                    0x0800  /* WDOG_INT */
-#define WM831X_WDOG_INT_SHIFT                       11  /* WDOG_INT */
-#define WM831X_WDOG_INT_WIDTH                        1  /* WDOG_INT */
-#define WM831X_TCHDATA_INT                      0x0400  /* TCHDATA_INT */
-#define WM831X_TCHDATA_INT_MASK                 0x0400  /* TCHDATA_INT */
-#define WM831X_TCHDATA_INT_SHIFT                    10  /* TCHDATA_INT */
-#define WM831X_TCHDATA_INT_WIDTH                     1  /* TCHDATA_INT */
-#define WM831X_TCHPD_INT                        0x0200  /* TCHPD_INT */
-#define WM831X_TCHPD_INT_MASK                   0x0200  /* TCHPD_INT */
-#define WM831X_TCHPD_INT_SHIFT                       9  /* TCHPD_INT */
-#define WM831X_TCHPD_INT_WIDTH                       1  /* TCHPD_INT */
-#define WM831X_AUXADC_INT                       0x0100  /* AUXADC_INT */
-#define WM831X_AUXADC_INT_MASK                  0x0100  /* AUXADC_INT */
-#define WM831X_AUXADC_INT_SHIFT                      8  /* AUXADC_INT */
-#define WM831X_AUXADC_INT_WIDTH                      1  /* AUXADC_INT */
-#define WM831X_PPM_INT                          0x0080  /* PPM_INT */
-#define WM831X_PPM_INT_MASK                     0x0080  /* PPM_INT */
-#define WM831X_PPM_INT_SHIFT                         7  /* PPM_INT */
-#define WM831X_PPM_INT_WIDTH                         1  /* PPM_INT */
-#define WM831X_CS_INT                           0x0040  /* CS_INT */
-#define WM831X_CS_INT_MASK                      0x0040  /* CS_INT */
-#define WM831X_CS_INT_SHIFT                          6  /* CS_INT */
-#define WM831X_CS_INT_WIDTH                          1  /* CS_INT */
-#define WM831X_RTC_INT                          0x0020  /* RTC_INT */
-#define WM831X_RTC_INT_MASK                     0x0020  /* RTC_INT */
-#define WM831X_RTC_INT_SHIFT                         5  /* RTC_INT */
-#define WM831X_RTC_INT_WIDTH                         1  /* RTC_INT */
-#define WM831X_OTP_INT                          0x0010  /* OTP_INT */
-#define WM831X_OTP_INT_MASK                     0x0010  /* OTP_INT */
-#define WM831X_OTP_INT_SHIFT                         4  /* OTP_INT */
-#define WM831X_OTP_INT_WIDTH                         1  /* OTP_INT */
-#define WM831X_CHILD_INT                        0x0008  /* CHILD_INT */
-#define WM831X_CHILD_INT_MASK                   0x0008  /* CHILD_INT */
-#define WM831X_CHILD_INT_SHIFT                       3  /* CHILD_INT */
-#define WM831X_CHILD_INT_WIDTH                       1  /* CHILD_INT */
-#define WM831X_CHG_INT                          0x0004  /* CHG_INT */
-#define WM831X_CHG_INT_MASK                     0x0004  /* CHG_INT */
-#define WM831X_CHG_INT_SHIFT                         2  /* CHG_INT */
-#define WM831X_CHG_INT_WIDTH                         1  /* CHG_INT */
-#define WM831X_HC_INT                           0x0002  /* HC_INT */
-#define WM831X_HC_INT_MASK                      0x0002  /* HC_INT */
-#define WM831X_HC_INT_SHIFT                          1  /* HC_INT */
-#define WM831X_HC_INT_WIDTH                          1  /* HC_INT */
-#define WM831X_UV_INT                           0x0001  /* UV_INT */
-#define WM831X_UV_INT_MASK                      0x0001  /* UV_INT */
-#define WM831X_UV_INT_SHIFT                          0  /* UV_INT */
-#define WM831X_UV_INT_WIDTH                          1  /* UV_INT */
-
-/*
- * R16401 (0x4011) - Interrupt Status 1
- */
-#define WM831X_PPM_SYSLO_EINT                   0x8000  /* PPM_SYSLO_EINT */
-#define WM831X_PPM_SYSLO_EINT_MASK              0x8000  /* PPM_SYSLO_EINT */
-#define WM831X_PPM_SYSLO_EINT_SHIFT                 15  /* PPM_SYSLO_EINT */
-#define WM831X_PPM_SYSLO_EINT_WIDTH                  1  /* PPM_SYSLO_EINT */
-#define WM831X_PPM_PWR_SRC_EINT                 0x4000  /* PPM_PWR_SRC_EINT */
-#define WM831X_PPM_PWR_SRC_EINT_MASK            0x4000  /* PPM_PWR_SRC_EINT */
-#define WM831X_PPM_PWR_SRC_EINT_SHIFT               14  /* PPM_PWR_SRC_EINT */
-#define WM831X_PPM_PWR_SRC_EINT_WIDTH                1  /* PPM_PWR_SRC_EINT */
-#define WM831X_PPM_USB_CURR_EINT                0x2000  /* PPM_USB_CURR_EINT */
-#define WM831X_PPM_USB_CURR_EINT_MASK           0x2000  /* PPM_USB_CURR_EINT */
-#define WM831X_PPM_USB_CURR_EINT_SHIFT              13  /* PPM_USB_CURR_EINT */
-#define WM831X_PPM_USB_CURR_EINT_WIDTH               1  /* PPM_USB_CURR_EINT */
-#define WM831X_ON_PIN_EINT                      0x1000  /* ON_PIN_EINT */
-#define WM831X_ON_PIN_EINT_MASK                 0x1000  /* ON_PIN_EINT */
-#define WM831X_ON_PIN_EINT_SHIFT                    12  /* ON_PIN_EINT */
-#define WM831X_ON_PIN_EINT_WIDTH                     1  /* ON_PIN_EINT */
-#define WM831X_WDOG_TO_EINT                     0x0800  /* WDOG_TO_EINT */
-#define WM831X_WDOG_TO_EINT_MASK                0x0800  /* WDOG_TO_EINT */
-#define WM831X_WDOG_TO_EINT_SHIFT                   11  /* WDOG_TO_EINT */
-#define WM831X_WDOG_TO_EINT_WIDTH                    1  /* WDOG_TO_EINT */
-#define WM831X_TCHDATA_EINT                     0x0400  /* TCHDATA_EINT */
-#define WM831X_TCHDATA_EINT_MASK                0x0400  /* TCHDATA_EINT */
-#define WM831X_TCHDATA_EINT_SHIFT                   10  /* TCHDATA_EINT */
-#define WM831X_TCHDATA_EINT_WIDTH                    1  /* TCHDATA_EINT */
-#define WM831X_TCHPD_EINT                       0x0200  /* TCHPD_EINT */
-#define WM831X_TCHPD_EINT_MASK                  0x0200  /* TCHPD_EINT */
-#define WM831X_TCHPD_EINT_SHIFT                      9  /* TCHPD_EINT */
-#define WM831X_TCHPD_EINT_WIDTH                      1  /* TCHPD_EINT */
-#define WM831X_AUXADC_DATA_EINT                 0x0100  /* AUXADC_DATA_EINT */
-#define WM831X_AUXADC_DATA_EINT_MASK            0x0100  /* AUXADC_DATA_EINT */
-#define WM831X_AUXADC_DATA_EINT_SHIFT                8  /* AUXADC_DATA_EINT */
-#define WM831X_AUXADC_DATA_EINT_WIDTH                1  /* AUXADC_DATA_EINT */
-#define WM831X_AUXADC_DCOMP4_EINT               0x0080  /* AUXADC_DCOMP4_EINT */
-#define WM831X_AUXADC_DCOMP4_EINT_MASK          0x0080  /* AUXADC_DCOMP4_EINT */
-#define WM831X_AUXADC_DCOMP4_EINT_SHIFT              7  /* AUXADC_DCOMP4_EINT */
-#define WM831X_AUXADC_DCOMP4_EINT_WIDTH              1  /* AUXADC_DCOMP4_EINT */
-#define WM831X_AUXADC_DCOMP3_EINT               0x0040  /* AUXADC_DCOMP3_EINT */
-#define WM831X_AUXADC_DCOMP3_EINT_MASK          0x0040  /* AUXADC_DCOMP3_EINT */
-#define WM831X_AUXADC_DCOMP3_EINT_SHIFT              6  /* AUXADC_DCOMP3_EINT */
-#define WM831X_AUXADC_DCOMP3_EINT_WIDTH              1  /* AUXADC_DCOMP3_EINT */
-#define WM831X_AUXADC_DCOMP2_EINT               0x0020  /* AUXADC_DCOMP2_EINT */
-#define WM831X_AUXADC_DCOMP2_EINT_MASK          0x0020  /* AUXADC_DCOMP2_EINT */
-#define WM831X_AUXADC_DCOMP2_EINT_SHIFT              5  /* AUXADC_DCOMP2_EINT */
-#define WM831X_AUXADC_DCOMP2_EINT_WIDTH              1  /* AUXADC_DCOMP2_EINT */
-#define WM831X_AUXADC_DCOMP1_EINT               0x0010  /* AUXADC_DCOMP1_EINT */
-#define WM831X_AUXADC_DCOMP1_EINT_MASK          0x0010  /* AUXADC_DCOMP1_EINT */
-#define WM831X_AUXADC_DCOMP1_EINT_SHIFT              4  /* AUXADC_DCOMP1_EINT */
-#define WM831X_AUXADC_DCOMP1_EINT_WIDTH              1  /* AUXADC_DCOMP1_EINT */
-#define WM831X_RTC_PER_EINT                     0x0008  /* RTC_PER_EINT */
-#define WM831X_RTC_PER_EINT_MASK                0x0008  /* RTC_PER_EINT */
-#define WM831X_RTC_PER_EINT_SHIFT                    3  /* RTC_PER_EINT */
-#define WM831X_RTC_PER_EINT_WIDTH                    1  /* RTC_PER_EINT */
-#define WM831X_RTC_ALM_EINT                     0x0004  /* RTC_ALM_EINT */
-#define WM831X_RTC_ALM_EINT_MASK                0x0004  /* RTC_ALM_EINT */
-#define WM831X_RTC_ALM_EINT_SHIFT                    2  /* RTC_ALM_EINT */
-#define WM831X_RTC_ALM_EINT_WIDTH                    1  /* RTC_ALM_EINT */
-#define WM831X_TEMP_THW_EINT                    0x0002  /* TEMP_THW_EINT */
-#define WM831X_TEMP_THW_EINT_MASK               0x0002  /* TEMP_THW_EINT */
-#define WM831X_TEMP_THW_EINT_SHIFT                   1  /* TEMP_THW_EINT */
-#define WM831X_TEMP_THW_EINT_WIDTH                   1  /* TEMP_THW_EINT */
-
-/*
- * R16402 (0x4012) - Interrupt Status 2
- */
-#define WM831X_CHG_BATT_HOT_EINT                0x8000  /* CHG_BATT_HOT_EINT */
-#define WM831X_CHG_BATT_HOT_EINT_MASK           0x8000  /* CHG_BATT_HOT_EINT */
-#define WM831X_CHG_BATT_HOT_EINT_SHIFT              15  /* CHG_BATT_HOT_EINT */
-#define WM831X_CHG_BATT_HOT_EINT_WIDTH               1  /* CHG_BATT_HOT_EINT */
-#define WM831X_CHG_BATT_COLD_EINT               0x4000  /* CHG_BATT_COLD_EINT */
-#define WM831X_CHG_BATT_COLD_EINT_MASK          0x4000  /* CHG_BATT_COLD_EINT */
-#define WM831X_CHG_BATT_COLD_EINT_SHIFT             14  /* CHG_BATT_COLD_EINT */
-#define WM831X_CHG_BATT_COLD_EINT_WIDTH              1  /* CHG_BATT_COLD_EINT */
-#define WM831X_CHG_BATT_FAIL_EINT               0x2000  /* CHG_BATT_FAIL_EINT */
-#define WM831X_CHG_BATT_FAIL_EINT_MASK          0x2000  /* CHG_BATT_FAIL_EINT */
-#define WM831X_CHG_BATT_FAIL_EINT_SHIFT             13  /* CHG_BATT_FAIL_EINT */
-#define WM831X_CHG_BATT_FAIL_EINT_WIDTH              1  /* CHG_BATT_FAIL_EINT */
-#define WM831X_CHG_OV_EINT                      0x1000  /* CHG_OV_EINT */
-#define WM831X_CHG_OV_EINT_MASK                 0x1000  /* CHG_OV_EINT */
-#define WM831X_CHG_OV_EINT_SHIFT                    12  /* CHG_OV_EINT */
-#define WM831X_CHG_OV_EINT_WIDTH                     1  /* CHG_OV_EINT */
-#define WM831X_CHG_END_EINT                     0x0800  /* CHG_END_EINT */
-#define WM831X_CHG_END_EINT_MASK                0x0800  /* CHG_END_EINT */
-#define WM831X_CHG_END_EINT_SHIFT                   11  /* CHG_END_EINT */
-#define WM831X_CHG_END_EINT_WIDTH                    1  /* CHG_END_EINT */
-#define WM831X_CHG_TO_EINT                      0x0400  /* CHG_TO_EINT */
-#define WM831X_CHG_TO_EINT_MASK                 0x0400  /* CHG_TO_EINT */
-#define WM831X_CHG_TO_EINT_SHIFT                    10  /* CHG_TO_EINT */
-#define WM831X_CHG_TO_EINT_WIDTH                     1  /* CHG_TO_EINT */
-#define WM831X_CHG_MODE_EINT                    0x0200  /* CHG_MODE_EINT */
-#define WM831X_CHG_MODE_EINT_MASK               0x0200  /* CHG_MODE_EINT */
-#define WM831X_CHG_MODE_EINT_SHIFT                   9  /* CHG_MODE_EINT */
-#define WM831X_CHG_MODE_EINT_WIDTH                   1  /* CHG_MODE_EINT */
-#define WM831X_CHG_START_EINT                   0x0100  /* CHG_START_EINT */
-#define WM831X_CHG_START_EINT_MASK              0x0100  /* CHG_START_EINT */
-#define WM831X_CHG_START_EINT_SHIFT                  8  /* CHG_START_EINT */
-#define WM831X_CHG_START_EINT_WIDTH                  1  /* CHG_START_EINT */
-#define WM831X_CS2_EINT                         0x0080  /* CS2_EINT */
-#define WM831X_CS2_EINT_MASK                    0x0080  /* CS2_EINT */
-#define WM831X_CS2_EINT_SHIFT                        7  /* CS2_EINT */
-#define WM831X_CS2_EINT_WIDTH                        1  /* CS2_EINT */
-#define WM831X_CS1_EINT                         0x0040  /* CS1_EINT */
-#define WM831X_CS1_EINT_MASK                    0x0040  /* CS1_EINT */
-#define WM831X_CS1_EINT_SHIFT                        6  /* CS1_EINT */
-#define WM831X_CS1_EINT_WIDTH                        1  /* CS1_EINT */
-#define WM831X_OTP_CMD_END_EINT                 0x0020  /* OTP_CMD_END_EINT */
-#define WM831X_OTP_CMD_END_EINT_MASK            0x0020  /* OTP_CMD_END_EINT */
-#define WM831X_OTP_CMD_END_EINT_SHIFT                5  /* OTP_CMD_END_EINT */
-#define WM831X_OTP_CMD_END_EINT_WIDTH                1  /* OTP_CMD_END_EINT */
-#define WM831X_OTP_ERR_EINT                     0x0010  /* OTP_ERR_EINT */
-#define WM831X_OTP_ERR_EINT_MASK                0x0010  /* OTP_ERR_EINT */
-#define WM831X_OTP_ERR_EINT_SHIFT                    4  /* OTP_ERR_EINT */
-#define WM831X_OTP_ERR_EINT_WIDTH                    1  /* OTP_ERR_EINT */
-#define WM831X_PS_POR_EINT                      0x0004  /* PS_POR_EINT */
-#define WM831X_PS_POR_EINT_MASK                 0x0004  /* PS_POR_EINT */
-#define WM831X_PS_POR_EINT_SHIFT                     2  /* PS_POR_EINT */
-#define WM831X_PS_POR_EINT_WIDTH                     1  /* PS_POR_EINT */
-#define WM831X_PS_SLEEP_OFF_EINT                0x0002  /* PS_SLEEP_OFF_EINT */
-#define WM831X_PS_SLEEP_OFF_EINT_MASK           0x0002  /* PS_SLEEP_OFF_EINT */
-#define WM831X_PS_SLEEP_OFF_EINT_SHIFT               1  /* PS_SLEEP_OFF_EINT */
-#define WM831X_PS_SLEEP_OFF_EINT_WIDTH               1  /* PS_SLEEP_OFF_EINT */
-#define WM831X_PS_ON_WAKE_EINT                  0x0001  /* PS_ON_WAKE_EINT */
-#define WM831X_PS_ON_WAKE_EINT_MASK             0x0001  /* PS_ON_WAKE_EINT */
-#define WM831X_PS_ON_WAKE_EINT_SHIFT                 0  /* PS_ON_WAKE_EINT */
-#define WM831X_PS_ON_WAKE_EINT_WIDTH                 1  /* PS_ON_WAKE_EINT */
-
-/*
- * R16403 (0x4013) - Interrupt Status 3
- */
-#define WM831X_UV_LDO10_EINT                    0x0200  /* UV_LDO10_EINT */
-#define WM831X_UV_LDO10_EINT_MASK               0x0200  /* UV_LDO10_EINT */
-#define WM831X_UV_LDO10_EINT_SHIFT                   9  /* UV_LDO10_EINT */
-#define WM831X_UV_LDO10_EINT_WIDTH                   1  /* UV_LDO10_EINT */
-#define WM831X_UV_LDO9_EINT                     0x0100  /* UV_LDO9_EINT */
-#define WM831X_UV_LDO9_EINT_MASK                0x0100  /* UV_LDO9_EINT */
-#define WM831X_UV_LDO9_EINT_SHIFT                    8  /* UV_LDO9_EINT */
-#define WM831X_UV_LDO9_EINT_WIDTH                    1  /* UV_LDO9_EINT */
-#define WM831X_UV_LDO8_EINT                     0x0080  /* UV_LDO8_EINT */
-#define WM831X_UV_LDO8_EINT_MASK                0x0080  /* UV_LDO8_EINT */
-#define WM831X_UV_LDO8_EINT_SHIFT                    7  /* UV_LDO8_EINT */
-#define WM831X_UV_LDO8_EINT_WIDTH                    1  /* UV_LDO8_EINT */
-#define WM831X_UV_LDO7_EINT                     0x0040  /* UV_LDO7_EINT */
-#define WM831X_UV_LDO7_EINT_MASK                0x0040  /* UV_LDO7_EINT */
-#define WM831X_UV_LDO7_EINT_SHIFT                    6  /* UV_LDO7_EINT */
-#define WM831X_UV_LDO7_EINT_WIDTH                    1  /* UV_LDO7_EINT */
-#define WM831X_UV_LDO6_EINT                     0x0020  /* UV_LDO6_EINT */
-#define WM831X_UV_LDO6_EINT_MASK                0x0020  /* UV_LDO6_EINT */
-#define WM831X_UV_LDO6_EINT_SHIFT                    5  /* UV_LDO6_EINT */
-#define WM831X_UV_LDO6_EINT_WIDTH                    1  /* UV_LDO6_EINT */
-#define WM831X_UV_LDO5_EINT                     0x0010  /* UV_LDO5_EINT */
-#define WM831X_UV_LDO5_EINT_MASK                0x0010  /* UV_LDO5_EINT */
-#define WM831X_UV_LDO5_EINT_SHIFT                    4  /* UV_LDO5_EINT */
-#define WM831X_UV_LDO5_EINT_WIDTH                    1  /* UV_LDO5_EINT */
-#define WM831X_UV_LDO4_EINT                     0x0008  /* UV_LDO4_EINT */
-#define WM831X_UV_LDO4_EINT_MASK                0x0008  /* UV_LDO4_EINT */
-#define WM831X_UV_LDO4_EINT_SHIFT                    3  /* UV_LDO4_EINT */
-#define WM831X_UV_LDO4_EINT_WIDTH                    1  /* UV_LDO4_EINT */
-#define WM831X_UV_LDO3_EINT                     0x0004  /* UV_LDO3_EINT */
-#define WM831X_UV_LDO3_EINT_MASK                0x0004  /* UV_LDO3_EINT */
-#define WM831X_UV_LDO3_EINT_SHIFT                    2  /* UV_LDO3_EINT */
-#define WM831X_UV_LDO3_EINT_WIDTH                    1  /* UV_LDO3_EINT */
-#define WM831X_UV_LDO2_EINT                     0x0002  /* UV_LDO2_EINT */
-#define WM831X_UV_LDO2_EINT_MASK                0x0002  /* UV_LDO2_EINT */
-#define WM831X_UV_LDO2_EINT_SHIFT                    1  /* UV_LDO2_EINT */
-#define WM831X_UV_LDO2_EINT_WIDTH                    1  /* UV_LDO2_EINT */
-#define WM831X_UV_LDO1_EINT                     0x0001  /* UV_LDO1_EINT */
-#define WM831X_UV_LDO1_EINT_MASK                0x0001  /* UV_LDO1_EINT */
-#define WM831X_UV_LDO1_EINT_SHIFT                    0  /* UV_LDO1_EINT */
-#define WM831X_UV_LDO1_EINT_WIDTH                    1  /* UV_LDO1_EINT */
-
-/*
- * R16404 (0x4014) - Interrupt Status 4
- */
-#define WM831X_HC_DC2_EINT                      0x0200  /* HC_DC2_EINT */
-#define WM831X_HC_DC2_EINT_MASK                 0x0200  /* HC_DC2_EINT */
-#define WM831X_HC_DC2_EINT_SHIFT                     9  /* HC_DC2_EINT */
-#define WM831X_HC_DC2_EINT_WIDTH                     1  /* HC_DC2_EINT */
-#define WM831X_HC_DC1_EINT                      0x0100  /* HC_DC1_EINT */
-#define WM831X_HC_DC1_EINT_MASK                 0x0100  /* HC_DC1_EINT */
-#define WM831X_HC_DC1_EINT_SHIFT                     8  /* HC_DC1_EINT */
-#define WM831X_HC_DC1_EINT_WIDTH                     1  /* HC_DC1_EINT */
-#define WM831X_UV_DC4_EINT                      0x0008  /* UV_DC4_EINT */
-#define WM831X_UV_DC4_EINT_MASK                 0x0008  /* UV_DC4_EINT */
-#define WM831X_UV_DC4_EINT_SHIFT                     3  /* UV_DC4_EINT */
-#define WM831X_UV_DC4_EINT_WIDTH                     1  /* UV_DC4_EINT */
-#define WM831X_UV_DC3_EINT                      0x0004  /* UV_DC3_EINT */
-#define WM831X_UV_DC3_EINT_MASK                 0x0004  /* UV_DC3_EINT */
-#define WM831X_UV_DC3_EINT_SHIFT                     2  /* UV_DC3_EINT */
-#define WM831X_UV_DC3_EINT_WIDTH                     1  /* UV_DC3_EINT */
-#define WM831X_UV_DC2_EINT                      0x0002  /* UV_DC2_EINT */
-#define WM831X_UV_DC2_EINT_MASK                 0x0002  /* UV_DC2_EINT */
-#define WM831X_UV_DC2_EINT_SHIFT                     1  /* UV_DC2_EINT */
-#define WM831X_UV_DC2_EINT_WIDTH                     1  /* UV_DC2_EINT */
-#define WM831X_UV_DC1_EINT                      0x0001  /* UV_DC1_EINT */
-#define WM831X_UV_DC1_EINT_MASK                 0x0001  /* UV_DC1_EINT */
-#define WM831X_UV_DC1_EINT_SHIFT                     0  /* UV_DC1_EINT */
-#define WM831X_UV_DC1_EINT_WIDTH                     1  /* UV_DC1_EINT */
-
-/*
- * R16405 (0x4015) - Interrupt Status 5
- */
-#define WM831X_GP16_EINT                        0x8000  /* GP16_EINT */
-#define WM831X_GP16_EINT_MASK                   0x8000  /* GP16_EINT */
-#define WM831X_GP16_EINT_SHIFT                      15  /* GP16_EINT */
-#define WM831X_GP16_EINT_WIDTH                       1  /* GP16_EINT */
-#define WM831X_GP15_EINT                        0x4000  /* GP15_EINT */
-#define WM831X_GP15_EINT_MASK                   0x4000  /* GP15_EINT */
-#define WM831X_GP15_EINT_SHIFT                      14  /* GP15_EINT */
-#define WM831X_GP15_EINT_WIDTH                       1  /* GP15_EINT */
-#define WM831X_GP14_EINT                        0x2000  /* GP14_EINT */
-#define WM831X_GP14_EINT_MASK                   0x2000  /* GP14_EINT */
-#define WM831X_GP14_EINT_SHIFT                      13  /* GP14_EINT */
-#define WM831X_GP14_EINT_WIDTH                       1  /* GP14_EINT */
-#define WM831X_GP13_EINT                        0x1000  /* GP13_EINT */
-#define WM831X_GP13_EINT_MASK                   0x1000  /* GP13_EINT */
-#define WM831X_GP13_EINT_SHIFT                      12  /* GP13_EINT */
-#define WM831X_GP13_EINT_WIDTH                       1  /* GP13_EINT */
-#define WM831X_GP12_EINT                        0x0800  /* GP12_EINT */
-#define WM831X_GP12_EINT_MASK                   0x0800  /* GP12_EINT */
-#define WM831X_GP12_EINT_SHIFT                      11  /* GP12_EINT */
-#define WM831X_GP12_EINT_WIDTH                       1  /* GP12_EINT */
-#define WM831X_GP11_EINT                        0x0400  /* GP11_EINT */
-#define WM831X_GP11_EINT_MASK                   0x0400  /* GP11_EINT */
-#define WM831X_GP11_EINT_SHIFT                      10  /* GP11_EINT */
-#define WM831X_GP11_EINT_WIDTH                       1  /* GP11_EINT */
-#define WM831X_GP10_EINT                        0x0200  /* GP10_EINT */
-#define WM831X_GP10_EINT_MASK                   0x0200  /* GP10_EINT */
-#define WM831X_GP10_EINT_SHIFT                       9  /* GP10_EINT */
-#define WM831X_GP10_EINT_WIDTH                       1  /* GP10_EINT */
-#define WM831X_GP9_EINT                         0x0100  /* GP9_EINT */
-#define WM831X_GP9_EINT_MASK                    0x0100  /* GP9_EINT */
-#define WM831X_GP9_EINT_SHIFT                        8  /* GP9_EINT */
-#define WM831X_GP9_EINT_WIDTH                        1  /* GP9_EINT */
-#define WM831X_GP8_EINT                         0x0080  /* GP8_EINT */
-#define WM831X_GP8_EINT_MASK                    0x0080  /* GP8_EINT */
-#define WM831X_GP8_EINT_SHIFT                        7  /* GP8_EINT */
-#define WM831X_GP8_EINT_WIDTH                        1  /* GP8_EINT */
-#define WM831X_GP7_EINT                         0x0040  /* GP7_EINT */
-#define WM831X_GP7_EINT_MASK                    0x0040  /* GP7_EINT */
-#define WM831X_GP7_EINT_SHIFT                        6  /* GP7_EINT */
-#define WM831X_GP7_EINT_WIDTH                        1  /* GP7_EINT */
-#define WM831X_GP6_EINT                         0x0020  /* GP6_EINT */
-#define WM831X_GP6_EINT_MASK                    0x0020  /* GP6_EINT */
-#define WM831X_GP6_EINT_SHIFT                        5  /* GP6_EINT */
-#define WM831X_GP6_EINT_WIDTH                        1  /* GP6_EINT */
-#define WM831X_GP5_EINT                         0x0010  /* GP5_EINT */
-#define WM831X_GP5_EINT_MASK                    0x0010  /* GP5_EINT */
-#define WM831X_GP5_EINT_SHIFT                        4  /* GP5_EINT */
-#define WM831X_GP5_EINT_WIDTH                        1  /* GP5_EINT */
-#define WM831X_GP4_EINT                         0x0008  /* GP4_EINT */
-#define WM831X_GP4_EINT_MASK                    0x0008  /* GP4_EINT */
-#define WM831X_GP4_EINT_SHIFT                        3  /* GP4_EINT */
-#define WM831X_GP4_EINT_WIDTH                        1  /* GP4_EINT */
-#define WM831X_GP3_EINT                         0x0004  /* GP3_EINT */
-#define WM831X_GP3_EINT_MASK                    0x0004  /* GP3_EINT */
-#define WM831X_GP3_EINT_SHIFT                        2  /* GP3_EINT */
-#define WM831X_GP3_EINT_WIDTH                        1  /* GP3_EINT */
-#define WM831X_GP2_EINT                         0x0002  /* GP2_EINT */
-#define WM831X_GP2_EINT_MASK                    0x0002  /* GP2_EINT */
-#define WM831X_GP2_EINT_SHIFT                        1  /* GP2_EINT */
-#define WM831X_GP2_EINT_WIDTH                        1  /* GP2_EINT */
-#define WM831X_GP1_EINT                         0x0001  /* GP1_EINT */
-#define WM831X_GP1_EINT_MASK                    0x0001  /* GP1_EINT */
-#define WM831X_GP1_EINT_SHIFT                        0  /* GP1_EINT */
-#define WM831X_GP1_EINT_WIDTH                        1  /* GP1_EINT */
-
-/*
- * R16407 (0x4017) - IRQ Config
- */
-#define WM831X_IRQ_OD                           0x0002  /* IRQ_OD */
-#define WM831X_IRQ_OD_MASK                      0x0002  /* IRQ_OD */
-#define WM831X_IRQ_OD_SHIFT                          1  /* IRQ_OD */
-#define WM831X_IRQ_OD_WIDTH                          1  /* IRQ_OD */
-#define WM831X_IM_IRQ                           0x0001  /* IM_IRQ */
-#define WM831X_IM_IRQ_MASK                      0x0001  /* IM_IRQ */
-#define WM831X_IM_IRQ_SHIFT                          0  /* IM_IRQ */
-#define WM831X_IM_IRQ_WIDTH                          1  /* IM_IRQ */
-
-/*
- * R16408 (0x4018) - System Interrupts Mask
- */
-#define WM831X_IM_PS_INT                        0x8000  /* IM_PS_INT */
-#define WM831X_IM_PS_INT_MASK                   0x8000  /* IM_PS_INT */
-#define WM831X_IM_PS_INT_SHIFT                      15  /* IM_PS_INT */
-#define WM831X_IM_PS_INT_WIDTH                       1  /* IM_PS_INT */
-#define WM831X_IM_TEMP_INT                      0x4000  /* IM_TEMP_INT */
-#define WM831X_IM_TEMP_INT_MASK                 0x4000  /* IM_TEMP_INT */
-#define WM831X_IM_TEMP_INT_SHIFT                    14  /* IM_TEMP_INT */
-#define WM831X_IM_TEMP_INT_WIDTH                     1  /* IM_TEMP_INT */
-#define WM831X_IM_GP_INT                        0x2000  /* IM_GP_INT */
-#define WM831X_IM_GP_INT_MASK                   0x2000  /* IM_GP_INT */
-#define WM831X_IM_GP_INT_SHIFT                      13  /* IM_GP_INT */
-#define WM831X_IM_GP_INT_WIDTH                       1  /* IM_GP_INT */
-#define WM831X_IM_ON_PIN_INT                    0x1000  /* IM_ON_PIN_INT */
-#define WM831X_IM_ON_PIN_INT_MASK               0x1000  /* IM_ON_PIN_INT */
-#define WM831X_IM_ON_PIN_INT_SHIFT                  12  /* IM_ON_PIN_INT */
-#define WM831X_IM_ON_PIN_INT_WIDTH                   1  /* IM_ON_PIN_INT */
-#define WM831X_IM_WDOG_INT                      0x0800  /* IM_WDOG_INT */
-#define WM831X_IM_WDOG_INT_MASK                 0x0800  /* IM_WDOG_INT */
-#define WM831X_IM_WDOG_INT_SHIFT                    11  /* IM_WDOG_INT */
-#define WM831X_IM_WDOG_INT_WIDTH                     1  /* IM_WDOG_INT */
-#define WM831X_IM_TCHDATA_INT                   0x0400  /* IM_TCHDATA_INT */
-#define WM831X_IM_TCHDATA_INT_MASK              0x0400  /* IM_TCHDATA_INT */
-#define WM831X_IM_TCHDATA_INT_SHIFT                 10  /* IM_TCHDATA_INT */
-#define WM831X_IM_TCHDATA_INT_WIDTH                  1  /* IM_TCHDATA_INT */
-#define WM831X_IM_TCHPD_INT                     0x0200  /* IM_TCHPD_INT */
-#define WM831X_IM_TCHPD_INT_MASK                0x0200  /* IM_TCHPD_INT */
-#define WM831X_IM_TCHPD_INT_SHIFT                    9  /* IM_TCHPD_INT */
-#define WM831X_IM_TCHPD_INT_WIDTH                    1  /* IM_TCHPD_INT */
-#define WM831X_IM_AUXADC_INT                    0x0100  /* IM_AUXADC_INT */
-#define WM831X_IM_AUXADC_INT_MASK               0x0100  /* IM_AUXADC_INT */
-#define WM831X_IM_AUXADC_INT_SHIFT                   8  /* IM_AUXADC_INT */
-#define WM831X_IM_AUXADC_INT_WIDTH                   1  /* IM_AUXADC_INT */
-#define WM831X_IM_PPM_INT                       0x0080  /* IM_PPM_INT */
-#define WM831X_IM_PPM_INT_MASK                  0x0080  /* IM_PPM_INT */
-#define WM831X_IM_PPM_INT_SHIFT                      7  /* IM_PPM_INT */
-#define WM831X_IM_PPM_INT_WIDTH                      1  /* IM_PPM_INT */
-#define WM831X_IM_CS_INT                        0x0040  /* IM_CS_INT */
-#define WM831X_IM_CS_INT_MASK                   0x0040  /* IM_CS_INT */
-#define WM831X_IM_CS_INT_SHIFT                       6  /* IM_CS_INT */
-#define WM831X_IM_CS_INT_WIDTH                       1  /* IM_CS_INT */
-#define WM831X_IM_RTC_INT                       0x0020  /* IM_RTC_INT */
-#define WM831X_IM_RTC_INT_MASK                  0x0020  /* IM_RTC_INT */
-#define WM831X_IM_RTC_INT_SHIFT                      5  /* IM_RTC_INT */
-#define WM831X_IM_RTC_INT_WIDTH                      1  /* IM_RTC_INT */
-#define WM831X_IM_OTP_INT                       0x0010  /* IM_OTP_INT */
-#define WM831X_IM_OTP_INT_MASK                  0x0010  /* IM_OTP_INT */
-#define WM831X_IM_OTP_INT_SHIFT                      4  /* IM_OTP_INT */
-#define WM831X_IM_OTP_INT_WIDTH                      1  /* IM_OTP_INT */
-#define WM831X_IM_CHILD_INT                     0x0008  /* IM_CHILD_INT */
-#define WM831X_IM_CHILD_INT_MASK                0x0008  /* IM_CHILD_INT */
-#define WM831X_IM_CHILD_INT_SHIFT                    3  /* IM_CHILD_INT */
-#define WM831X_IM_CHILD_INT_WIDTH                    1  /* IM_CHILD_INT */
-#define WM831X_IM_CHG_INT                       0x0004  /* IM_CHG_INT */
-#define WM831X_IM_CHG_INT_MASK                  0x0004  /* IM_CHG_INT */
-#define WM831X_IM_CHG_INT_SHIFT                      2  /* IM_CHG_INT */
-#define WM831X_IM_CHG_INT_WIDTH                      1  /* IM_CHG_INT */
-#define WM831X_IM_HC_INT                        0x0002  /* IM_HC_INT */
-#define WM831X_IM_HC_INT_MASK                   0x0002  /* IM_HC_INT */
-#define WM831X_IM_HC_INT_SHIFT                       1  /* IM_HC_INT */
-#define WM831X_IM_HC_INT_WIDTH                       1  /* IM_HC_INT */
-#define WM831X_IM_UV_INT                        0x0001  /* IM_UV_INT */
-#define WM831X_IM_UV_INT_MASK                   0x0001  /* IM_UV_INT */
-#define WM831X_IM_UV_INT_SHIFT                       0  /* IM_UV_INT */
-#define WM831X_IM_UV_INT_WIDTH                       1  /* IM_UV_INT */
-
-/*
- * R16409 (0x4019) - Interrupt Status 1 Mask
- */
-#define WM831X_IM_PPM_SYSLO_EINT                0x8000  /* IM_PPM_SYSLO_EINT */
-#define WM831X_IM_PPM_SYSLO_EINT_MASK           0x8000  /* IM_PPM_SYSLO_EINT */
-#define WM831X_IM_PPM_SYSLO_EINT_SHIFT              15  /* IM_PPM_SYSLO_EINT */
-#define WM831X_IM_PPM_SYSLO_EINT_WIDTH               1  /* IM_PPM_SYSLO_EINT */
-#define WM831X_IM_PPM_PWR_SRC_EINT              0x4000  /* IM_PPM_PWR_SRC_EINT */
-#define WM831X_IM_PPM_PWR_SRC_EINT_MASK         0x4000  /* IM_PPM_PWR_SRC_EINT */
-#define WM831X_IM_PPM_PWR_SRC_EINT_SHIFT            14  /* IM_PPM_PWR_SRC_EINT */
-#define WM831X_IM_PPM_PWR_SRC_EINT_WIDTH             1  /* IM_PPM_PWR_SRC_EINT */
-#define WM831X_IM_PPM_USB_CURR_EINT             0x2000  /* IM_PPM_USB_CURR_EINT */
-#define WM831X_IM_PPM_USB_CURR_EINT_MASK        0x2000  /* IM_PPM_USB_CURR_EINT */
-#define WM831X_IM_PPM_USB_CURR_EINT_SHIFT           13  /* IM_PPM_USB_CURR_EINT */
-#define WM831X_IM_PPM_USB_CURR_EINT_WIDTH            1  /* IM_PPM_USB_CURR_EINT */
-#define WM831X_IM_ON_PIN_EINT                   0x1000  /* IM_ON_PIN_EINT */
-#define WM831X_IM_ON_PIN_EINT_MASK              0x1000  /* IM_ON_PIN_EINT */
-#define WM831X_IM_ON_PIN_EINT_SHIFT                 12  /* IM_ON_PIN_EINT */
-#define WM831X_IM_ON_PIN_EINT_WIDTH                  1  /* IM_ON_PIN_EINT */
-#define WM831X_IM_WDOG_TO_EINT                  0x0800  /* IM_WDOG_TO_EINT */
-#define WM831X_IM_WDOG_TO_EINT_MASK             0x0800  /* IM_WDOG_TO_EINT */
-#define WM831X_IM_WDOG_TO_EINT_SHIFT                11  /* IM_WDOG_TO_EINT */
-#define WM831X_IM_WDOG_TO_EINT_WIDTH                 1  /* IM_WDOG_TO_EINT */
-#define WM831X_IM_TCHDATA_EINT                  0x0400  /* IM_TCHDATA_EINT */
-#define WM831X_IM_TCHDATA_EINT_MASK             0x0400  /* IM_TCHDATA_EINT */
-#define WM831X_IM_TCHDATA_EINT_SHIFT                10  /* IM_TCHDATA_EINT */
-#define WM831X_IM_TCHDATA_EINT_WIDTH                 1  /* IM_TCHDATA_EINT */
-#define WM831X_IM_TCHPD_EINT                    0x0200  /* IM_TCHPD_EINT */
-#define WM831X_IM_TCHPD_EINT_MASK               0x0200  /* IM_TCHPD_EINT */
-#define WM831X_IM_TCHPD_EINT_SHIFT                   9  /* IM_TCHPD_EINT */
-#define WM831X_IM_TCHPD_EINT_WIDTH                   1  /* IM_TCHPD_EINT */
-#define WM831X_IM_AUXADC_DATA_EINT              0x0100  /* IM_AUXADC_DATA_EINT */
-#define WM831X_IM_AUXADC_DATA_EINT_MASK         0x0100  /* IM_AUXADC_DATA_EINT */
-#define WM831X_IM_AUXADC_DATA_EINT_SHIFT             8  /* IM_AUXADC_DATA_EINT */
-#define WM831X_IM_AUXADC_DATA_EINT_WIDTH             1  /* IM_AUXADC_DATA_EINT */
-#define WM831X_IM_AUXADC_DCOMP4_EINT            0x0080  /* IM_AUXADC_DCOMP4_EINT */
-#define WM831X_IM_AUXADC_DCOMP4_EINT_MASK       0x0080  /* IM_AUXADC_DCOMP4_EINT */
-#define WM831X_IM_AUXADC_DCOMP4_EINT_SHIFT           7  /* IM_AUXADC_DCOMP4_EINT */
-#define WM831X_IM_AUXADC_DCOMP4_EINT_WIDTH           1  /* IM_AUXADC_DCOMP4_EINT */
-#define WM831X_IM_AUXADC_DCOMP3_EINT            0x0040  /* IM_AUXADC_DCOMP3_EINT */
-#define WM831X_IM_AUXADC_DCOMP3_EINT_MASK       0x0040  /* IM_AUXADC_DCOMP3_EINT */
-#define WM831X_IM_AUXADC_DCOMP3_EINT_SHIFT           6  /* IM_AUXADC_DCOMP3_EINT */
-#define WM831X_IM_AUXADC_DCOMP3_EINT_WIDTH           1  /* IM_AUXADC_DCOMP3_EINT */
-#define WM831X_IM_AUXADC_DCOMP2_EINT            0x0020  /* IM_AUXADC_DCOMP2_EINT */
-#define WM831X_IM_AUXADC_DCOMP2_EINT_MASK       0x0020  /* IM_AUXADC_DCOMP2_EINT */
-#define WM831X_IM_AUXADC_DCOMP2_EINT_SHIFT           5  /* IM_AUXADC_DCOMP2_EINT */
-#define WM831X_IM_AUXADC_DCOMP2_EINT_WIDTH           1  /* IM_AUXADC_DCOMP2_EINT */
-#define WM831X_IM_AUXADC_DCOMP1_EINT            0x0010  /* IM_AUXADC_DCOMP1_EINT */
-#define WM831X_IM_AUXADC_DCOMP1_EINT_MASK       0x0010  /* IM_AUXADC_DCOMP1_EINT */
-#define WM831X_IM_AUXADC_DCOMP1_EINT_SHIFT           4  /* IM_AUXADC_DCOMP1_EINT */
-#define WM831X_IM_AUXADC_DCOMP1_EINT_WIDTH           1  /* IM_AUXADC_DCOMP1_EINT */
-#define WM831X_IM_RTC_PER_EINT                  0x0008  /* IM_RTC_PER_EINT */
-#define WM831X_IM_RTC_PER_EINT_MASK             0x0008  /* IM_RTC_PER_EINT */
-#define WM831X_IM_RTC_PER_EINT_SHIFT                 3  /* IM_RTC_PER_EINT */
-#define WM831X_IM_RTC_PER_EINT_WIDTH                 1  /* IM_RTC_PER_EINT */
-#define WM831X_IM_RTC_ALM_EINT                  0x0004  /* IM_RTC_ALM_EINT */
-#define WM831X_IM_RTC_ALM_EINT_MASK             0x0004  /* IM_RTC_ALM_EINT */
-#define WM831X_IM_RTC_ALM_EINT_SHIFT                 2  /* IM_RTC_ALM_EINT */
-#define WM831X_IM_RTC_ALM_EINT_WIDTH                 1  /* IM_RTC_ALM_EINT */
-#define WM831X_IM_TEMP_THW_EINT                 0x0002  /* IM_TEMP_THW_EINT */
-#define WM831X_IM_TEMP_THW_EINT_MASK            0x0002  /* IM_TEMP_THW_EINT */
-#define WM831X_IM_TEMP_THW_EINT_SHIFT                1  /* IM_TEMP_THW_EINT */
-#define WM831X_IM_TEMP_THW_EINT_WIDTH                1  /* IM_TEMP_THW_EINT */
-
-/*
- * R16410 (0x401A) - Interrupt Status 2 Mask
- */
-#define WM831X_IM_CHG_BATT_HOT_EINT             0x8000  /* IM_CHG_BATT_HOT_EINT */
-#define WM831X_IM_CHG_BATT_HOT_EINT_MASK        0x8000  /* IM_CHG_BATT_HOT_EINT */
-#define WM831X_IM_CHG_BATT_HOT_EINT_SHIFT           15  /* IM_CHG_BATT_HOT_EINT */
-#define WM831X_IM_CHG_BATT_HOT_EINT_WIDTH            1  /* IM_CHG_BATT_HOT_EINT */
-#define WM831X_IM_CHG_BATT_COLD_EINT            0x4000  /* IM_CHG_BATT_COLD_EINT */
-#define WM831X_IM_CHG_BATT_COLD_EINT_MASK       0x4000  /* IM_CHG_BATT_COLD_EINT */
-#define WM831X_IM_CHG_BATT_COLD_EINT_SHIFT          14  /* IM_CHG_BATT_COLD_EINT */
-#define WM831X_IM_CHG_BATT_COLD_EINT_WIDTH           1  /* IM_CHG_BATT_COLD_EINT */
-#define WM831X_IM_CHG_BATT_FAIL_EINT            0x2000  /* IM_CHG_BATT_FAIL_EINT */
-#define WM831X_IM_CHG_BATT_FAIL_EINT_MASK       0x2000  /* IM_CHG_BATT_FAIL_EINT */
-#define WM831X_IM_CHG_BATT_FAIL_EINT_SHIFT          13  /* IM_CHG_BATT_FAIL_EINT */
-#define WM831X_IM_CHG_BATT_FAIL_EINT_WIDTH           1  /* IM_CHG_BATT_FAIL_EINT */
-#define WM831X_IM_CHG_OV_EINT                   0x1000  /* IM_CHG_OV_EINT */
-#define WM831X_IM_CHG_OV_EINT_MASK              0x1000  /* IM_CHG_OV_EINT */
-#define WM831X_IM_CHG_OV_EINT_SHIFT                 12  /* IM_CHG_OV_EINT */
-#define WM831X_IM_CHG_OV_EINT_WIDTH                  1  /* IM_CHG_OV_EINT */
-#define WM831X_IM_CHG_END_EINT                  0x0800  /* IM_CHG_END_EINT */
-#define WM831X_IM_CHG_END_EINT_MASK             0x0800  /* IM_CHG_END_EINT */
-#define WM831X_IM_CHG_END_EINT_SHIFT                11  /* IM_CHG_END_EINT */
-#define WM831X_IM_CHG_END_EINT_WIDTH                 1  /* IM_CHG_END_EINT */
-#define WM831X_IM_CHG_TO_EINT                   0x0400  /* IM_CHG_TO_EINT */
-#define WM831X_IM_CHG_TO_EINT_MASK              0x0400  /* IM_CHG_TO_EINT */
-#define WM831X_IM_CHG_TO_EINT_SHIFT                 10  /* IM_CHG_TO_EINT */
-#define WM831X_IM_CHG_TO_EINT_WIDTH                  1  /* IM_CHG_TO_EINT */
-#define WM831X_IM_CHG_MODE_EINT                 0x0200  /* IM_CHG_MODE_EINT */
-#define WM831X_IM_CHG_MODE_EINT_MASK            0x0200  /* IM_CHG_MODE_EINT */
-#define WM831X_IM_CHG_MODE_EINT_SHIFT                9  /* IM_CHG_MODE_EINT */
-#define WM831X_IM_CHG_MODE_EINT_WIDTH                1  /* IM_CHG_MODE_EINT */
-#define WM831X_IM_CHG_START_EINT                0x0100  /* IM_CHG_START_EINT */
-#define WM831X_IM_CHG_START_EINT_MASK           0x0100  /* IM_CHG_START_EINT */
-#define WM831X_IM_CHG_START_EINT_SHIFT               8  /* IM_CHG_START_EINT */
-#define WM831X_IM_CHG_START_EINT_WIDTH               1  /* IM_CHG_START_EINT */
-#define WM831X_IM_CS2_EINT                      0x0080  /* IM_CS2_EINT */
-#define WM831X_IM_CS2_EINT_MASK                 0x0080  /* IM_CS2_EINT */
-#define WM831X_IM_CS2_EINT_SHIFT                     7  /* IM_CS2_EINT */
-#define WM831X_IM_CS2_EINT_WIDTH                     1  /* IM_CS2_EINT */
-#define WM831X_IM_CS1_EINT                      0x0040  /* IM_CS1_EINT */
-#define WM831X_IM_CS1_EINT_MASK                 0x0040  /* IM_CS1_EINT */
-#define WM831X_IM_CS1_EINT_SHIFT                     6  /* IM_CS1_EINT */
-#define WM831X_IM_CS1_EINT_WIDTH                     1  /* IM_CS1_EINT */
-#define WM831X_IM_OTP_CMD_END_EINT              0x0020  /* IM_OTP_CMD_END_EINT */
-#define WM831X_IM_OTP_CMD_END_EINT_MASK         0x0020  /* IM_OTP_CMD_END_EINT */
-#define WM831X_IM_OTP_CMD_END_EINT_SHIFT             5  /* IM_OTP_CMD_END_EINT */
-#define WM831X_IM_OTP_CMD_END_EINT_WIDTH             1  /* IM_OTP_CMD_END_EINT */
-#define WM831X_IM_OTP_ERR_EINT                  0x0010  /* IM_OTP_ERR_EINT */
-#define WM831X_IM_OTP_ERR_EINT_MASK             0x0010  /* IM_OTP_ERR_EINT */
-#define WM831X_IM_OTP_ERR_EINT_SHIFT                 4  /* IM_OTP_ERR_EINT */
-#define WM831X_IM_OTP_ERR_EINT_WIDTH                 1  /* IM_OTP_ERR_EINT */
-#define WM831X_IM_PS_POR_EINT                   0x0004  /* IM_PS_POR_EINT */
-#define WM831X_IM_PS_POR_EINT_MASK              0x0004  /* IM_PS_POR_EINT */
-#define WM831X_IM_PS_POR_EINT_SHIFT                  2  /* IM_PS_POR_EINT */
-#define WM831X_IM_PS_POR_EINT_WIDTH                  1  /* IM_PS_POR_EINT */
-#define WM831X_IM_PS_SLEEP_OFF_EINT             0x0002  /* IM_PS_SLEEP_OFF_EINT */
-#define WM831X_IM_PS_SLEEP_OFF_EINT_MASK        0x0002  /* IM_PS_SLEEP_OFF_EINT */
-#define WM831X_IM_PS_SLEEP_OFF_EINT_SHIFT            1  /* IM_PS_SLEEP_OFF_EINT */
-#define WM831X_IM_PS_SLEEP_OFF_EINT_WIDTH            1  /* IM_PS_SLEEP_OFF_EINT */
-#define WM831X_IM_PS_ON_WAKE_EINT               0x0001  /* IM_PS_ON_WAKE_EINT */
-#define WM831X_IM_PS_ON_WAKE_EINT_MASK          0x0001  /* IM_PS_ON_WAKE_EINT */
-#define WM831X_IM_PS_ON_WAKE_EINT_SHIFT              0  /* IM_PS_ON_WAKE_EINT */
-#define WM831X_IM_PS_ON_WAKE_EINT_WIDTH              1  /* IM_PS_ON_WAKE_EINT */
-
-/*
- * R16411 (0x401B) - Interrupt Status 3 Mask
- */
-#define WM831X_IM_UV_LDO10_EINT                 0x0200  /* IM_UV_LDO10_EINT */
-#define WM831X_IM_UV_LDO10_EINT_MASK            0x0200  /* IM_UV_LDO10_EINT */
-#define WM831X_IM_UV_LDO10_EINT_SHIFT                9  /* IM_UV_LDO10_EINT */
-#define WM831X_IM_UV_LDO10_EINT_WIDTH                1  /* IM_UV_LDO10_EINT */
-#define WM831X_IM_UV_LDO9_EINT                  0x0100  /* IM_UV_LDO9_EINT */
-#define WM831X_IM_UV_LDO9_EINT_MASK             0x0100  /* IM_UV_LDO9_EINT */
-#define WM831X_IM_UV_LDO9_EINT_SHIFT                 8  /* IM_UV_LDO9_EINT */
-#define WM831X_IM_UV_LDO9_EINT_WIDTH                 1  /* IM_UV_LDO9_EINT */
-#define WM831X_IM_UV_LDO8_EINT                  0x0080  /* IM_UV_LDO8_EINT */
-#define WM831X_IM_UV_LDO8_EINT_MASK             0x0080  /* IM_UV_LDO8_EINT */
-#define WM831X_IM_UV_LDO8_EINT_SHIFT                 7  /* IM_UV_LDO8_EINT */
-#define WM831X_IM_UV_LDO8_EINT_WIDTH                 1  /* IM_UV_LDO8_EINT */
-#define WM831X_IM_UV_LDO7_EINT                  0x0040  /* IM_UV_LDO7_EINT */
-#define WM831X_IM_UV_LDO7_EINT_MASK             0x0040  /* IM_UV_LDO7_EINT */
-#define WM831X_IM_UV_LDO7_EINT_SHIFT                 6  /* IM_UV_LDO7_EINT */
-#define WM831X_IM_UV_LDO7_EINT_WIDTH                 1  /* IM_UV_LDO7_EINT */
-#define WM831X_IM_UV_LDO6_EINT                  0x0020  /* IM_UV_LDO6_EINT */
-#define WM831X_IM_UV_LDO6_EINT_MASK             0x0020  /* IM_UV_LDO6_EINT */
-#define WM831X_IM_UV_LDO6_EINT_SHIFT                 5  /* IM_UV_LDO6_EINT */
-#define WM831X_IM_UV_LDO6_EINT_WIDTH                 1  /* IM_UV_LDO6_EINT */
-#define WM831X_IM_UV_LDO5_EINT                  0x0010  /* IM_UV_LDO5_EINT */
-#define WM831X_IM_UV_LDO5_EINT_MASK             0x0010  /* IM_UV_LDO5_EINT */
-#define WM831X_IM_UV_LDO5_EINT_SHIFT                 4  /* IM_UV_LDO5_EINT */
-#define WM831X_IM_UV_LDO5_EINT_WIDTH                 1  /* IM_UV_LDO5_EINT */
-#define WM831X_IM_UV_LDO4_EINT                  0x0008  /* IM_UV_LDO4_EINT */
-#define WM831X_IM_UV_LDO4_EINT_MASK             0x0008  /* IM_UV_LDO4_EINT */
-#define WM831X_IM_UV_LDO4_EINT_SHIFT                 3  /* IM_UV_LDO4_EINT */
-#define WM831X_IM_UV_LDO4_EINT_WIDTH                 1  /* IM_UV_LDO4_EINT */
-#define WM831X_IM_UV_LDO3_EINT                  0x0004  /* IM_UV_LDO3_EINT */
-#define WM831X_IM_UV_LDO3_EINT_MASK             0x0004  /* IM_UV_LDO3_EINT */
-#define WM831X_IM_UV_LDO3_EINT_SHIFT                 2  /* IM_UV_LDO3_EINT */
-#define WM831X_IM_UV_LDO3_EINT_WIDTH                 1  /* IM_UV_LDO3_EINT */
-#define WM831X_IM_UV_LDO2_EINT                  0x0002  /* IM_UV_LDO2_EINT */
-#define WM831X_IM_UV_LDO2_EINT_MASK             0x0002  /* IM_UV_LDO2_EINT */
-#define WM831X_IM_UV_LDO2_EINT_SHIFT                 1  /* IM_UV_LDO2_EINT */
-#define WM831X_IM_UV_LDO2_EINT_WIDTH                 1  /* IM_UV_LDO2_EINT */
-#define WM831X_IM_UV_LDO1_EINT                  0x0001  /* IM_UV_LDO1_EINT */
-#define WM831X_IM_UV_LDO1_EINT_MASK             0x0001  /* IM_UV_LDO1_EINT */
-#define WM831X_IM_UV_LDO1_EINT_SHIFT                 0  /* IM_UV_LDO1_EINT */
-#define WM831X_IM_UV_LDO1_EINT_WIDTH                 1  /* IM_UV_LDO1_EINT */
-
-/*
- * R16412 (0x401C) - Interrupt Status 4 Mask
- */
-#define WM831X_IM_HC_DC2_EINT                   0x0200  /* IM_HC_DC2_EINT */
-#define WM831X_IM_HC_DC2_EINT_MASK              0x0200  /* IM_HC_DC2_EINT */
-#define WM831X_IM_HC_DC2_EINT_SHIFT                  9  /* IM_HC_DC2_EINT */
-#define WM831X_IM_HC_DC2_EINT_WIDTH                  1  /* IM_HC_DC2_EINT */
-#define WM831X_IM_HC_DC1_EINT                   0x0100  /* IM_HC_DC1_EINT */
-#define WM831X_IM_HC_DC1_EINT_MASK              0x0100  /* IM_HC_DC1_EINT */
-#define WM831X_IM_HC_DC1_EINT_SHIFT                  8  /* IM_HC_DC1_EINT */
-#define WM831X_IM_HC_DC1_EINT_WIDTH                  1  /* IM_HC_DC1_EINT */
-#define WM831X_IM_UV_DC4_EINT                   0x0008  /* IM_UV_DC4_EINT */
-#define WM831X_IM_UV_DC4_EINT_MASK              0x0008  /* IM_UV_DC4_EINT */
-#define WM831X_IM_UV_DC4_EINT_SHIFT                  3  /* IM_UV_DC4_EINT */
-#define WM831X_IM_UV_DC4_EINT_WIDTH                  1  /* IM_UV_DC4_EINT */
-#define WM831X_IM_UV_DC3_EINT                   0x0004  /* IM_UV_DC3_EINT */
-#define WM831X_IM_UV_DC3_EINT_MASK              0x0004  /* IM_UV_DC3_EINT */
-#define WM831X_IM_UV_DC3_EINT_SHIFT                  2  /* IM_UV_DC3_EINT */
-#define WM831X_IM_UV_DC3_EINT_WIDTH                  1  /* IM_UV_DC3_EINT */
-#define WM831X_IM_UV_DC2_EINT                   0x0002  /* IM_UV_DC2_EINT */
-#define WM831X_IM_UV_DC2_EINT_MASK              0x0002  /* IM_UV_DC2_EINT */
-#define WM831X_IM_UV_DC2_EINT_SHIFT                  1  /* IM_UV_DC2_EINT */
-#define WM831X_IM_UV_DC2_EINT_WIDTH                  1  /* IM_UV_DC2_EINT */
-#define WM831X_IM_UV_DC1_EINT                   0x0001  /* IM_UV_DC1_EINT */
-#define WM831X_IM_UV_DC1_EINT_MASK              0x0001  /* IM_UV_DC1_EINT */
-#define WM831X_IM_UV_DC1_EINT_SHIFT                  0  /* IM_UV_DC1_EINT */
-#define WM831X_IM_UV_DC1_EINT_WIDTH                  1  /* IM_UV_DC1_EINT */
-
-/*
- * R16413 (0x401D) - Interrupt Status 5 Mask
- */
-#define WM831X_IM_GP16_EINT                     0x8000  /* IM_GP16_EINT */
-#define WM831X_IM_GP16_EINT_MASK                0x8000  /* IM_GP16_EINT */
-#define WM831X_IM_GP16_EINT_SHIFT                   15  /* IM_GP16_EINT */
-#define WM831X_IM_GP16_EINT_WIDTH                    1  /* IM_GP16_EINT */
-#define WM831X_IM_GP15_EINT                     0x4000  /* IM_GP15_EINT */
-#define WM831X_IM_GP15_EINT_MASK                0x4000  /* IM_GP15_EINT */
-#define WM831X_IM_GP15_EINT_SHIFT                   14  /* IM_GP15_EINT */
-#define WM831X_IM_GP15_EINT_WIDTH                    1  /* IM_GP15_EINT */
-#define WM831X_IM_GP14_EINT                     0x2000  /* IM_GP14_EINT */
-#define WM831X_IM_GP14_EINT_MASK                0x2000  /* IM_GP14_EINT */
-#define WM831X_IM_GP14_EINT_SHIFT                   13  /* IM_GP14_EINT */
-#define WM831X_IM_GP14_EINT_WIDTH                    1  /* IM_GP14_EINT */
-#define WM831X_IM_GP13_EINT                     0x1000  /* IM_GP13_EINT */
-#define WM831X_IM_GP13_EINT_MASK                0x1000  /* IM_GP13_EINT */
-#define WM831X_IM_GP13_EINT_SHIFT                   12  /* IM_GP13_EINT */
-#define WM831X_IM_GP13_EINT_WIDTH                    1  /* IM_GP13_EINT */
-#define WM831X_IM_GP12_EINT                     0x0800  /* IM_GP12_EINT */
-#define WM831X_IM_GP12_EINT_MASK                0x0800  /* IM_GP12_EINT */
-#define WM831X_IM_GP12_EINT_SHIFT                   11  /* IM_GP12_EINT */
-#define WM831X_IM_GP12_EINT_WIDTH                    1  /* IM_GP12_EINT */
-#define WM831X_IM_GP11_EINT                     0x0400  /* IM_GP11_EINT */
-#define WM831X_IM_GP11_EINT_MASK                0x0400  /* IM_GP11_EINT */
-#define WM831X_IM_GP11_EINT_SHIFT                   10  /* IM_GP11_EINT */
-#define WM831X_IM_GP11_EINT_WIDTH                    1  /* IM_GP11_EINT */
-#define WM831X_IM_GP10_EINT                     0x0200  /* IM_GP10_EINT */
-#define WM831X_IM_GP10_EINT_MASK                0x0200  /* IM_GP10_EINT */
-#define WM831X_IM_GP10_EINT_SHIFT                    9  /* IM_GP10_EINT */
-#define WM831X_IM_GP10_EINT_WIDTH                    1  /* IM_GP10_EINT */
-#define WM831X_IM_GP9_EINT                      0x0100  /* IM_GP9_EINT */
-#define WM831X_IM_GP9_EINT_MASK                 0x0100  /* IM_GP9_EINT */
-#define WM831X_IM_GP9_EINT_SHIFT                     8  /* IM_GP9_EINT */
-#define WM831X_IM_GP9_EINT_WIDTH                     1  /* IM_GP9_EINT */
-#define WM831X_IM_GP8_EINT                      0x0080  /* IM_GP8_EINT */
-#define WM831X_IM_GP8_EINT_MASK                 0x0080  /* IM_GP8_EINT */
-#define WM831X_IM_GP8_EINT_SHIFT                     7  /* IM_GP8_EINT */
-#define WM831X_IM_GP8_EINT_WIDTH                     1  /* IM_GP8_EINT */
-#define WM831X_IM_GP7_EINT                      0x0040  /* IM_GP7_EINT */
-#define WM831X_IM_GP7_EINT_MASK                 0x0040  /* IM_GP7_EINT */
-#define WM831X_IM_GP7_EINT_SHIFT                     6  /* IM_GP7_EINT */
-#define WM831X_IM_GP7_EINT_WIDTH                     1  /* IM_GP7_EINT */
-#define WM831X_IM_GP6_EINT                      0x0020  /* IM_GP6_EINT */
-#define WM831X_IM_GP6_EINT_MASK                 0x0020  /* IM_GP6_EINT */
-#define WM831X_IM_GP6_EINT_SHIFT                     5  /* IM_GP6_EINT */
-#define WM831X_IM_GP6_EINT_WIDTH                     1  /* IM_GP6_EINT */
-#define WM831X_IM_GP5_EINT                      0x0010  /* IM_GP5_EINT */
-#define WM831X_IM_GP5_EINT_MASK                 0x0010  /* IM_GP5_EINT */
-#define WM831X_IM_GP5_EINT_SHIFT                     4  /* IM_GP5_EINT */
-#define WM831X_IM_GP5_EINT_WIDTH                     1  /* IM_GP5_EINT */
-#define WM831X_IM_GP4_EINT                      0x0008  /* IM_GP4_EINT */
-#define WM831X_IM_GP4_EINT_MASK                 0x0008  /* IM_GP4_EINT */
-#define WM831X_IM_GP4_EINT_SHIFT                     3  /* IM_GP4_EINT */
-#define WM831X_IM_GP4_EINT_WIDTH                     1  /* IM_GP4_EINT */
-#define WM831X_IM_GP3_EINT                      0x0004  /* IM_GP3_EINT */
-#define WM831X_IM_GP3_EINT_MASK                 0x0004  /* IM_GP3_EINT */
-#define WM831X_IM_GP3_EINT_SHIFT                     2  /* IM_GP3_EINT */
-#define WM831X_IM_GP3_EINT_WIDTH                     1  /* IM_GP3_EINT */
-#define WM831X_IM_GP2_EINT                      0x0002  /* IM_GP2_EINT */
-#define WM831X_IM_GP2_EINT_MASK                 0x0002  /* IM_GP2_EINT */
-#define WM831X_IM_GP2_EINT_SHIFT                     1  /* IM_GP2_EINT */
-#define WM831X_IM_GP2_EINT_WIDTH                     1  /* IM_GP2_EINT */
-#define WM831X_IM_GP1_EINT                      0x0001  /* IM_GP1_EINT */
-#define WM831X_IM_GP1_EINT_MASK                 0x0001  /* IM_GP1_EINT */
-#define WM831X_IM_GP1_EINT_SHIFT                     0  /* IM_GP1_EINT */
-#define WM831X_IM_GP1_EINT_WIDTH                     1  /* IM_GP1_EINT */
-
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/mfd/wm831x/otp.h b/ANDROID_3.4.5/include/linux/mfd/wm831x/otp.h
deleted file mode 100644
index ce1f81a3..00000000
--- a/ANDROID_3.4.5/include/linux/mfd/wm831x/otp.h
+++ /dev/null
@@ -1,162 +0,0 @@
-/*
- * include/linux/mfd/wm831x/otp.h -- OTP interface for WM831x
- *
- * Copyright 2009 Wolfson Microelectronics PLC.
- *
- * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- */
-
-#ifndef __MFD_WM831X_OTP_H__
-#define __MFD_WM831X_OTP_H__
-
-int wm831x_otp_init(struct wm831x *wm831x);
-void wm831x_otp_exit(struct wm831x *wm831x);
-
-/*
- * R30720 (0x7800) - Unique ID 1
- */
-#define WM831X_UNIQUE_ID_MASK                   0xFFFF  /* UNIQUE_ID - [15:0] */
-#define WM831X_UNIQUE_ID_SHIFT                       0  /* UNIQUE_ID - [15:0] */
-#define WM831X_UNIQUE_ID_WIDTH                      16  /* UNIQUE_ID - [15:0] */
-
-/*
- * R30721 (0x7801) - Unique ID 2
- */
-#define WM831X_UNIQUE_ID_MASK                   0xFFFF  /* UNIQUE_ID - [15:0] */
-#define WM831X_UNIQUE_ID_SHIFT                       0  /* UNIQUE_ID - [15:0] */
-#define WM831X_UNIQUE_ID_WIDTH                      16  /* UNIQUE_ID - [15:0] */
-
-/*
- * R30722 (0x7802) - Unique ID 3
- */
-#define WM831X_UNIQUE_ID_MASK                   0xFFFF  /* UNIQUE_ID - [15:0] */
-#define WM831X_UNIQUE_ID_SHIFT                       0  /* UNIQUE_ID - [15:0] */
-#define WM831X_UNIQUE_ID_WIDTH                      16  /* UNIQUE_ID - [15:0] */
-
-/*
- * R30723 (0x7803) - Unique ID 4
- */
-#define WM831X_UNIQUE_ID_MASK                   0xFFFF  /* UNIQUE_ID - [15:0] */
-#define WM831X_UNIQUE_ID_SHIFT                       0  /* UNIQUE_ID - [15:0] */
-#define WM831X_UNIQUE_ID_WIDTH                      16  /* UNIQUE_ID - [15:0] */
-
-/*
- * R30724 (0x7804) - Unique ID 5
- */
-#define WM831X_UNIQUE_ID_MASK                   0xFFFF  /* UNIQUE_ID - [15:0] */
-#define WM831X_UNIQUE_ID_SHIFT                       0  /* UNIQUE_ID - [15:0] */
-#define WM831X_UNIQUE_ID_WIDTH                      16  /* UNIQUE_ID - [15:0] */
-
-/*
- * R30725 (0x7805) - Unique ID 6
- */
-#define WM831X_UNIQUE_ID_MASK                   0xFFFF  /* UNIQUE_ID - [15:0] */
-#define WM831X_UNIQUE_ID_SHIFT                       0  /* UNIQUE_ID - [15:0] */
-#define WM831X_UNIQUE_ID_WIDTH                      16  /* UNIQUE_ID - [15:0] */
-
-/*
- * R30726 (0x7806) - Unique ID 7
- */
-#define WM831X_UNIQUE_ID_MASK                   0xFFFF  /* UNIQUE_ID - [15:0] */
-#define WM831X_UNIQUE_ID_SHIFT                       0  /* UNIQUE_ID - [15:0] */
-#define WM831X_UNIQUE_ID_WIDTH                      16  /* UNIQUE_ID - [15:0] */
-
-/*
- * R30727 (0x7807) - Unique ID 8
- */
-#define WM831X_UNIQUE_ID_MASK                   0xFFFF  /* UNIQUE_ID - [15:0] */
-#define WM831X_UNIQUE_ID_SHIFT                       0  /* UNIQUE_ID - [15:0] */
-#define WM831X_UNIQUE_ID_WIDTH                      16  /* UNIQUE_ID - [15:0] */
-
-/*
- * R30728 (0x7808) - Factory OTP ID
- */
-#define WM831X_OTP_FACT_ID_MASK                 0xFFFE  /* OTP_FACT_ID - [15:1] */
-#define WM831X_OTP_FACT_ID_SHIFT                     1  /* OTP_FACT_ID - [15:1] */
-#define WM831X_OTP_FACT_ID_WIDTH                    15  /* OTP_FACT_ID - [15:1] */
-#define WM831X_OTP_FACT_FINAL                   0x0001  /* OTP_FACT_FINAL */
-#define WM831X_OTP_FACT_FINAL_MASK              0x0001  /* OTP_FACT_FINAL */
-#define WM831X_OTP_FACT_FINAL_SHIFT                  0  /* OTP_FACT_FINAL */
-#define WM831X_OTP_FACT_FINAL_WIDTH                  1  /* OTP_FACT_FINAL */
-
-/*
- * R30729 (0x7809) - Factory OTP 1
- */
-#define WM831X_DC3_TRIM_MASK                    0xF000  /* DC3_TRIM - [15:12] */
-#define WM831X_DC3_TRIM_SHIFT                       12  /* DC3_TRIM - [15:12] */
-#define WM831X_DC3_TRIM_WIDTH                        4  /* DC3_TRIM - [15:12] */
-#define WM831X_DC2_TRIM_MASK                    0x0FC0  /* DC2_TRIM - [11:6] */
-#define WM831X_DC2_TRIM_SHIFT                        6  /* DC2_TRIM - [11:6] */
-#define WM831X_DC2_TRIM_WIDTH                        6  /* DC2_TRIM - [11:6] */
-#define WM831X_DC1_TRIM_MASK                    0x003F  /* DC1_TRIM - [5:0] */
-#define WM831X_DC1_TRIM_SHIFT                        0  /* DC1_TRIM - [5:0] */
-#define WM831X_DC1_TRIM_WIDTH                        6  /* DC1_TRIM - [5:0] */
-
-/*
- * R30730 (0x780A) - Factory OTP 2
- */
-#define WM831X_CHIP_ID_MASK                     0xFFFF  /* CHIP_ID - [15:0] */
-#define WM831X_CHIP_ID_SHIFT                         0  /* CHIP_ID - [15:0] */
-#define WM831X_CHIP_ID_WIDTH                        16  /* CHIP_ID - [15:0] */
-
-/*
- * R30731 (0x780B) - Factory OTP 3
- */
-#define WM831X_OSC_TRIM_MASK                    0x0780  /* OSC_TRIM - [10:7] */
-#define WM831X_OSC_TRIM_SHIFT                        7  /* OSC_TRIM - [10:7] */
-#define WM831X_OSC_TRIM_WIDTH                        4  /* OSC_TRIM - [10:7] */
-#define WM831X_BG_TRIM_MASK                     0x0078  /* BG_TRIM - [6:3] */
-#define WM831X_BG_TRIM_SHIFT                         3  /* BG_TRIM - [6:3] */
-#define WM831X_BG_TRIM_WIDTH                         4  /* BG_TRIM - [6:3] */
-#define WM831X_LPBG_TRIM_MASK                   0x0007  /* LPBG_TRIM - [2:0] */
-#define WM831X_LPBG_TRIM_SHIFT                       0  /* LPBG_TRIM - [2:0] */
-#define WM831X_LPBG_TRIM_WIDTH                       3  /* LPBG_TRIM - [2:0] */
-
-/*
- * R30732 (0x780C) - Factory OTP 4
- */
-#define WM831X_CHILD_I2C_ADDR_MASK              0x00FE  /* CHILD_I2C_ADDR - [7:1] */
-#define WM831X_CHILD_I2C_ADDR_SHIFT                  1  /* CHILD_I2C_ADDR - [7:1] */
-#define WM831X_CHILD_I2C_ADDR_WIDTH                  7  /* CHILD_I2C_ADDR - [7:1] */
-#define WM831X_CH_AW                            0x0001  /* CH_AW */
-#define WM831X_CH_AW_MASK                       0x0001  /* CH_AW */
-#define WM831X_CH_AW_SHIFT                           0  /* CH_AW */
-#define WM831X_CH_AW_WIDTH                           1  /* CH_AW */
-
-/*
- * R30733 (0x780D) - Factory OTP 5
- */
-#define WM831X_CHARGE_TRIM_MASK                 0x003F  /* CHARGE_TRIM - [5:0] */
-#define WM831X_CHARGE_TRIM_SHIFT                     0  /* CHARGE_TRIM - [5:0] */
-#define WM831X_CHARGE_TRIM_WIDTH                     6  /* CHARGE_TRIM - [5:0] */
-
-/*
- * R30736 (0x7810) - Customer OTP ID
- */
-#define WM831X_OTP_AUTO_PROG                    0x8000  /* OTP_AUTO_PROG */
-#define WM831X_OTP_AUTO_PROG_MASK               0x8000  /* OTP_AUTO_PROG */
-#define WM831X_OTP_AUTO_PROG_SHIFT                  15  /* OTP_AUTO_PROG */
-#define WM831X_OTP_AUTO_PROG_WIDTH                   1  /* OTP_AUTO_PROG */
-#define WM831X_OTP_CUST_ID_MASK                 0x7FFE  /* OTP_CUST_ID - [14:1] */
-#define WM831X_OTP_CUST_ID_SHIFT                     1  /* OTP_CUST_ID - [14:1] */
-#define WM831X_OTP_CUST_ID_WIDTH                    14  /* OTP_CUST_ID - [14:1] */
-#define WM831X_OTP_CUST_FINAL                   0x0001  /* OTP_CUST_FINAL */
-#define WM831X_OTP_CUST_FINAL_MASK              0x0001  /* OTP_CUST_FINAL */
-#define WM831X_OTP_CUST_FINAL_SHIFT                  0  /* OTP_CUST_FINAL */
-#define WM831X_OTP_CUST_FINAL_WIDTH                  1  /* OTP_CUST_FINAL */
-
-/*
- * R30759 (0x7827) - DBE CHECK DATA
- */
-#define WM831X_DBE_VALID_DATA_MASK              0xFFFF  /* DBE_VALID_DATA - [15:0] */
-#define WM831X_DBE_VALID_DATA_SHIFT                  0  /* DBE_VALID_DATA - [15:0] */
-#define WM831X_DBE_VALID_DATA_WIDTH                 16  /* DBE_VALID_DATA - [15:0] */
-
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/mfd/wm831x/pdata.h b/ANDROID_3.4.5/include/linux/mfd/wm831x/pdata.h
deleted file mode 100644
index 1d7a3f7b..00000000
--- a/ANDROID_3.4.5/include/linux/mfd/wm831x/pdata.h
+++ /dev/null
@@ -1,150 +0,0 @@
-/*
- * include/linux/mfd/wm831x/pdata.h -- Platform data for WM831x
- *
- * Copyright 2009 Wolfson Microelectronics PLC.
- *
- * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- */
-
-#ifndef __MFD_WM831X_PDATA_H__
-#define __MFD_WM831X_PDATA_H__
-
-struct wm831x;
-struct regulator_init_data;
-
-struct wm831x_backlight_pdata {
-	int isink;     /** ISINK to use, 1 or 2 */
-	int max_uA;    /** Maximum current to allow */
-};
-
-struct wm831x_backup_pdata {
-	int charger_enable;
-	int no_constant_voltage;  /** Disable constant voltage charging */
-	int vlim;   /** Voltage limit in milivolts */
-	int ilim;   /** Current limit in microamps */
-};
-
-struct wm831x_battery_pdata {
-	int enable;         /** Enable charging */
-	int fast_enable;    /** Enable fast charging */
-	int off_mask;       /** Mask OFF while charging */
-	int trickle_ilim;   /** Trickle charge current limit, in mA */
-	int vsel;           /** Target voltage, in mV */
-	int eoc_iterm;      /** End of trickle charge current, in mA */
-	int fast_ilim;      /** Fast charge current limit, in mA */
-	int timeout;        /** Charge cycle timeout, in minutes */
-};
-
-/**
- * Configuration for the WM831x DC-DC BuckWise convertors.  This
- * should be passed as driver_data in the regulator_init_data.
- *
- * Currently all the configuration is for the fast DVS switching
- * support of the devices.  This allows MFPs on the device to be
- * configured as an input to switch between two output voltages,
- * allowing voltage transitions without the expense of an access over
- * I2C or SPI buses.
- */
-struct wm831x_buckv_pdata {
-	int dvs_gpio;        /** CPU GPIO to use for DVS switching */
-	int dvs_control_src; /** Hardware DVS source to use (1 or 2) */
-	int dvs_init_state;  /** DVS state to expect on startup */
-	int dvs_state_gpio;  /** CPU GPIO to use for monitoring status */
-};
-
-/* Sources for status LED configuration.  Values are register values
- * plus 1 to allow for a zero default for preserve.
- */
-enum wm831x_status_src {
-	WM831X_STATUS_PRESERVE = 0,  /* Keep the current hardware setting */
-	WM831X_STATUS_OTP = 1,
-	WM831X_STATUS_POWER = 2,
-	WM831X_STATUS_CHARGER = 3,
-	WM831X_STATUS_MANUAL = 4,
-};
-
-struct wm831x_status_pdata {
-	enum wm831x_status_src default_src;
-	const char *name;
-	const char *default_trigger;
-};
-
-struct wm831x_touch_pdata {
-	int fivewire;          /** 1 for five wire mode, 0 for 4 wire */
-	int isel;              /** Current for pen down (uA) */
-	int rpu;               /** Pen down sensitivity resistor divider */
-	int pressure;          /** Report pressure (boolean) */
-	unsigned int data_irq; /** Touch data ready IRQ */
-	int data_irqf;         /** IRQ flags for data ready IRQ */
-	unsigned int pd_irq;   /** Touch pendown detect IRQ */
-	int pd_irqf;           /** IRQ flags for pen down IRQ */
-};
-
-enum wm831x_watchdog_action {
-	WM831X_WDOG_NONE = 0,
-	WM831X_WDOG_INTERRUPT = 1,
-	WM831X_WDOG_RESET = 2,
-	WM831X_WDOG_WAKE = 3,
-};
-
-struct wm831x_watchdog_pdata {
-	enum wm831x_watchdog_action primary, secondary;
-	int update_gpio;
-	unsigned int software:1;
-};
-
-#define WM831X_MAX_STATUS 2
-#define WM831X_MAX_DCDC   4
-#define WM831X_MAX_EPE    2
-#define WM831X_MAX_LDO    11
-#define WM831X_MAX_ISINK  2
-
-#define WM831X_GPIO_CONFIGURE 0x10000
-#define WM831X_GPIO_NUM 16
-
-struct wm831x_pdata {
-	/** Used to distinguish multiple WM831x chips */
-	int wm831x_num;
-
-	/** Called before subdevices are set up */
-	int (*pre_init)(struct wm831x *wm831x);
-	/** Called after subdevices are set up */
-	int (*post_init)(struct wm831x *wm831x);
-
-	/** Put the /IRQ line into CMOS mode */
-	bool irq_cmos;
-
-	/** Disable the touchscreen */
-	bool disable_touch;
-
-	/** The driver should initiate a power off sequence during shutdown */
-	bool soft_shutdown;
-
-	int irq_base;
-	int gpio_base;
-	int gpio_defaults[WM831X_GPIO_NUM];
-	struct wm831x_backlight_pdata *backlight;
-	struct wm831x_backup_pdata *backup;
-	struct wm831x_battery_pdata *battery;
-	struct wm831x_touch_pdata *touch;
-	struct wm831x_watchdog_pdata *watchdog;
-
-	/** LED1 = 0 and so on */
-	struct wm831x_status_pdata *status[WM831X_MAX_STATUS];
-	/** DCDC1 = 0 and so on */
-	struct regulator_init_data *dcdc[WM831X_MAX_DCDC];
-	/** EPE1 = 0 and so on */
-	struct regulator_init_data *epe[WM831X_MAX_EPE];
-	/** LDO1 = 0 and so on */
-	struct regulator_init_data *ldo[WM831X_MAX_LDO];
-	/** ISINK1 = 0 and so on*/
-	struct regulator_init_data *isink[WM831X_MAX_ISINK];
-};
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/mfd/wm831x/pmu.h b/ANDROID_3.4.5/include/linux/mfd/wm831x/pmu.h
deleted file mode 100644
index b18cbb02..00000000
--- a/ANDROID_3.4.5/include/linux/mfd/wm831x/pmu.h
+++ /dev/null
@@ -1,189 +0,0 @@
-/*
- * include/linux/mfd/wm831x/pmu.h -- PMU for WM831x
- *
- * Copyright 2009 Wolfson Microelectronics PLC.
- *
- * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- */
-
-#ifndef __MFD_WM831X_PMU_H__
-#define __MFD_WM831X_PMU_H__
-
-/*
- * R16387 (0x4003) - Power State
- */
-#define WM831X_CHIP_ON                          0x8000  /* CHIP_ON */
-#define WM831X_CHIP_ON_MASK                     0x8000  /* CHIP_ON */
-#define WM831X_CHIP_ON_SHIFT                        15  /* CHIP_ON */
-#define WM831X_CHIP_ON_WIDTH                         1  /* CHIP_ON */
-#define WM831X_CHIP_SLP                         0x4000  /* CHIP_SLP */
-#define WM831X_CHIP_SLP_MASK                    0x4000  /* CHIP_SLP */
-#define WM831X_CHIP_SLP_SHIFT                       14  /* CHIP_SLP */
-#define WM831X_CHIP_SLP_WIDTH                        1  /* CHIP_SLP */
-#define WM831X_REF_LP                           0x1000  /* REF_LP */
-#define WM831X_REF_LP_MASK                      0x1000  /* REF_LP */
-#define WM831X_REF_LP_SHIFT                         12  /* REF_LP */
-#define WM831X_REF_LP_WIDTH                          1  /* REF_LP */
-#define WM831X_PWRSTATE_DLY_MASK                0x0C00  /* PWRSTATE_DLY - [11:10] */
-#define WM831X_PWRSTATE_DLY_SHIFT                   10  /* PWRSTATE_DLY - [11:10] */
-#define WM831X_PWRSTATE_DLY_WIDTH                    2  /* PWRSTATE_DLY - [11:10] */
-#define WM831X_SWRST_DLY                        0x0200  /* SWRST_DLY */
-#define WM831X_SWRST_DLY_MASK                   0x0200  /* SWRST_DLY */
-#define WM831X_SWRST_DLY_SHIFT                       9  /* SWRST_DLY */
-#define WM831X_SWRST_DLY_WIDTH                       1  /* SWRST_DLY */
-#define WM831X_USB100MA_STARTUP_MASK            0x0030  /* USB100MA_STARTUP - [5:4] */
-#define WM831X_USB100MA_STARTUP_SHIFT                4  /* USB100MA_STARTUP - [5:4] */
-#define WM831X_USB100MA_STARTUP_WIDTH                2  /* USB100MA_STARTUP - [5:4] */
-#define WM831X_USB_CURR_STS                     0x0008  /* USB_CURR_STS */
-#define WM831X_USB_CURR_STS_MASK                0x0008  /* USB_CURR_STS */
-#define WM831X_USB_CURR_STS_SHIFT                    3  /* USB_CURR_STS */
-#define WM831X_USB_CURR_STS_WIDTH                    1  /* USB_CURR_STS */
-#define WM831X_USB_ILIM_MASK                    0x0007  /* USB_ILIM - [2:0] */
-#define WM831X_USB_ILIM_SHIFT                        0  /* USB_ILIM - [2:0] */
-#define WM831X_USB_ILIM_WIDTH                        3  /* USB_ILIM - [2:0] */
-
-/*
- * R16397 (0x400D) - System Status
- */
-#define WM831X_THW_STS                          0x8000  /* THW_STS */
-#define WM831X_THW_STS_MASK                     0x8000  /* THW_STS */
-#define WM831X_THW_STS_SHIFT                        15  /* THW_STS */
-#define WM831X_THW_STS_WIDTH                         1  /* THW_STS */
-#define WM831X_PWR_SRC_BATT                     0x0400  /* PWR_SRC_BATT */
-#define WM831X_PWR_SRC_BATT_MASK                0x0400  /* PWR_SRC_BATT */
-#define WM831X_PWR_SRC_BATT_SHIFT                   10  /* PWR_SRC_BATT */
-#define WM831X_PWR_SRC_BATT_WIDTH                    1  /* PWR_SRC_BATT */
-#define WM831X_PWR_WALL                         0x0200  /* PWR_WALL */
-#define WM831X_PWR_WALL_MASK                    0x0200  /* PWR_WALL */
-#define WM831X_PWR_WALL_SHIFT                        9  /* PWR_WALL */
-#define WM831X_PWR_WALL_WIDTH                        1  /* PWR_WALL */
-#define WM831X_PWR_USB                          0x0100  /* PWR_USB */
-#define WM831X_PWR_USB_MASK                     0x0100  /* PWR_USB */
-#define WM831X_PWR_USB_SHIFT                         8  /* PWR_USB */
-#define WM831X_PWR_USB_WIDTH                         1  /* PWR_USB */
-#define WM831X_MAIN_STATE_MASK                  0x001F  /* MAIN_STATE - [4:0] */
-#define WM831X_MAIN_STATE_SHIFT                      0  /* MAIN_STATE - [4:0] */
-#define WM831X_MAIN_STATE_WIDTH                      5  /* MAIN_STATE - [4:0] */
-
-/*
- * R16456 (0x4048) - Charger Control 1
- */
-#define WM831X_CHG_ENA                          0x8000  /* CHG_ENA */
-#define WM831X_CHG_ENA_MASK                     0x8000  /* CHG_ENA */
-#define WM831X_CHG_ENA_SHIFT                        15  /* CHG_ENA */
-#define WM831X_CHG_ENA_WIDTH                         1  /* CHG_ENA */
-#define WM831X_CHG_FRC                          0x4000  /* CHG_FRC */
-#define WM831X_CHG_FRC_MASK                     0x4000  /* CHG_FRC */
-#define WM831X_CHG_FRC_SHIFT                        14  /* CHG_FRC */
-#define WM831X_CHG_FRC_WIDTH                         1  /* CHG_FRC */
-#define WM831X_CHG_ITERM_MASK                   0x1C00  /* CHG_ITERM - [12:10] */
-#define WM831X_CHG_ITERM_SHIFT                      10  /* CHG_ITERM - [12:10] */
-#define WM831X_CHG_ITERM_WIDTH                       3  /* CHG_ITERM - [12:10] */
-#define WM831X_CHG_FAST                         0x0020  /* CHG_FAST */
-#define WM831X_CHG_FAST_MASK                    0x0020  /* CHG_FAST */
-#define WM831X_CHG_FAST_SHIFT                        5  /* CHG_FAST */
-#define WM831X_CHG_FAST_WIDTH                        1  /* CHG_FAST */
-#define WM831X_CHG_IMON_ENA                     0x0002  /* CHG_IMON_ENA */
-#define WM831X_CHG_IMON_ENA_MASK                0x0002  /* CHG_IMON_ENA */
-#define WM831X_CHG_IMON_ENA_SHIFT                    1  /* CHG_IMON_ENA */
-#define WM831X_CHG_IMON_ENA_WIDTH                    1  /* CHG_IMON_ENA */
-#define WM831X_CHG_CHIP_TEMP_MON                0x0001  /* CHG_CHIP_TEMP_MON */
-#define WM831X_CHG_CHIP_TEMP_MON_MASK           0x0001  /* CHG_CHIP_TEMP_MON */
-#define WM831X_CHG_CHIP_TEMP_MON_SHIFT               0  /* CHG_CHIP_TEMP_MON */
-#define WM831X_CHG_CHIP_TEMP_MON_WIDTH               1  /* CHG_CHIP_TEMP_MON */
-
-/*
- * R16457 (0x4049) - Charger Control 2
- */
-#define WM831X_CHG_OFF_MSK                      0x4000  /* CHG_OFF_MSK */
-#define WM831X_CHG_OFF_MSK_MASK                 0x4000  /* CHG_OFF_MSK */
-#define WM831X_CHG_OFF_MSK_SHIFT                    14  /* CHG_OFF_MSK */
-#define WM831X_CHG_OFF_MSK_WIDTH                     1  /* CHG_OFF_MSK */
-#define WM831X_CHG_TIME_MASK                    0x0F00  /* CHG_TIME - [11:8] */
-#define WM831X_CHG_TIME_SHIFT                        8  /* CHG_TIME - [11:8] */
-#define WM831X_CHG_TIME_WIDTH                        4  /* CHG_TIME - [11:8] */
-#define WM831X_CHG_TRKL_ILIM_MASK               0x00C0  /* CHG_TRKL_ILIM - [7:6] */
-#define WM831X_CHG_TRKL_ILIM_SHIFT                   6  /* CHG_TRKL_ILIM - [7:6] */
-#define WM831X_CHG_TRKL_ILIM_WIDTH                   2  /* CHG_TRKL_ILIM - [7:6] */
-#define WM831X_CHG_VSEL_MASK                    0x0030  /* CHG_VSEL - [5:4] */
-#define WM831X_CHG_VSEL_SHIFT                        4  /* CHG_VSEL - [5:4] */
-#define WM831X_CHG_VSEL_WIDTH                        2  /* CHG_VSEL - [5:4] */
-#define WM831X_CHG_FAST_ILIM_MASK               0x000F  /* CHG_FAST_ILIM - [3:0] */
-#define WM831X_CHG_FAST_ILIM_SHIFT                   0  /* CHG_FAST_ILIM - [3:0] */
-#define WM831X_CHG_FAST_ILIM_WIDTH                   4  /* CHG_FAST_ILIM - [3:0] */
-
-/*
- * R16458 (0x404A) - Charger Status
- */
-#define WM831X_BATT_OV_STS                      0x8000  /* BATT_OV_STS */
-#define WM831X_BATT_OV_STS_MASK                 0x8000  /* BATT_OV_STS */
-#define WM831X_BATT_OV_STS_SHIFT                    15  /* BATT_OV_STS */
-#define WM831X_BATT_OV_STS_WIDTH                     1  /* BATT_OV_STS */
-#define WM831X_CHG_STATE_MASK                   0x7000  /* CHG_STATE - [14:12] */
-#define WM831X_CHG_STATE_SHIFT                      12  /* CHG_STATE - [14:12] */
-#define WM831X_CHG_STATE_WIDTH                       3  /* CHG_STATE - [14:12] */
-#define WM831X_BATT_HOT_STS                     0x0800  /* BATT_HOT_STS */
-#define WM831X_BATT_HOT_STS_MASK                0x0800  /* BATT_HOT_STS */
-#define WM831X_BATT_HOT_STS_SHIFT                   11  /* BATT_HOT_STS */
-#define WM831X_BATT_HOT_STS_WIDTH                    1  /* BATT_HOT_STS */
-#define WM831X_BATT_COLD_STS                    0x0400  /* BATT_COLD_STS */
-#define WM831X_BATT_COLD_STS_MASK               0x0400  /* BATT_COLD_STS */
-#define WM831X_BATT_COLD_STS_SHIFT                  10  /* BATT_COLD_STS */
-#define WM831X_BATT_COLD_STS_WIDTH                   1  /* BATT_COLD_STS */
-#define WM831X_CHG_TOPOFF                       0x0200  /* CHG_TOPOFF */
-#define WM831X_CHG_TOPOFF_MASK                  0x0200  /* CHG_TOPOFF */
-#define WM831X_CHG_TOPOFF_SHIFT                      9  /* CHG_TOPOFF */
-#define WM831X_CHG_TOPOFF_WIDTH                      1  /* CHG_TOPOFF */
-#define WM831X_CHG_ACTIVE                       0x0100  /* CHG_ACTIVE */
-#define WM831X_CHG_ACTIVE_MASK                  0x0100  /* CHG_ACTIVE */
-#define WM831X_CHG_ACTIVE_SHIFT                      8  /* CHG_ACTIVE */
-#define WM831X_CHG_ACTIVE_WIDTH                      1  /* CHG_ACTIVE */
-#define WM831X_CHG_TIME_ELAPSED_MASK            0x00FF  /* CHG_TIME_ELAPSED - [7:0] */
-#define WM831X_CHG_TIME_ELAPSED_SHIFT                0  /* CHG_TIME_ELAPSED - [7:0] */
-#define WM831X_CHG_TIME_ELAPSED_WIDTH                8  /* CHG_TIME_ELAPSED - [7:0] */
-
-#define WM831X_CHG_STATE_OFF         (0 << WM831X_CHG_STATE_SHIFT)
-#define WM831X_CHG_STATE_TRICKLE     (1 << WM831X_CHG_STATE_SHIFT)
-#define WM831X_CHG_STATE_FAST        (2 << WM831X_CHG_STATE_SHIFT)
-#define WM831X_CHG_STATE_TRICKLE_OT  (3 << WM831X_CHG_STATE_SHIFT)
-#define WM831X_CHG_STATE_FAST_OT     (4 << WM831X_CHG_STATE_SHIFT)
-#define WM831X_CHG_STATE_DEFECTIVE   (5 << WM831X_CHG_STATE_SHIFT)
-
-/*
- * R16459 (0x404B) - Backup Charger Control
- */
-#define WM831X_BKUP_CHG_ENA                     0x8000  /* BKUP_CHG_ENA */
-#define WM831X_BKUP_CHG_ENA_MASK                0x8000  /* BKUP_CHG_ENA */
-#define WM831X_BKUP_CHG_ENA_SHIFT                   15  /* BKUP_CHG_ENA */
-#define WM831X_BKUP_CHG_ENA_WIDTH                    1  /* BKUP_CHG_ENA */
-#define WM831X_BKUP_CHG_STS                     0x4000  /* BKUP_CHG_STS */
-#define WM831X_BKUP_CHG_STS_MASK                0x4000  /* BKUP_CHG_STS */
-#define WM831X_BKUP_CHG_STS_SHIFT                   14  /* BKUP_CHG_STS */
-#define WM831X_BKUP_CHG_STS_WIDTH                    1  /* BKUP_CHG_STS */
-#define WM831X_BKUP_CHG_MODE                    0x1000  /* BKUP_CHG_MODE */
-#define WM831X_BKUP_CHG_MODE_MASK               0x1000  /* BKUP_CHG_MODE */
-#define WM831X_BKUP_CHG_MODE_SHIFT                  12  /* BKUP_CHG_MODE */
-#define WM831X_BKUP_CHG_MODE_WIDTH                   1  /* BKUP_CHG_MODE */
-#define WM831X_BKUP_BATT_DET_ENA                0x0800  /* BKUP_BATT_DET_ENA */
-#define WM831X_BKUP_BATT_DET_ENA_MASK           0x0800  /* BKUP_BATT_DET_ENA */
-#define WM831X_BKUP_BATT_DET_ENA_SHIFT              11  /* BKUP_BATT_DET_ENA */
-#define WM831X_BKUP_BATT_DET_ENA_WIDTH               1  /* BKUP_BATT_DET_ENA */
-#define WM831X_BKUP_BATT_STS                    0x0400  /* BKUP_BATT_STS */
-#define WM831X_BKUP_BATT_STS_MASK               0x0400  /* BKUP_BATT_STS */
-#define WM831X_BKUP_BATT_STS_SHIFT                  10  /* BKUP_BATT_STS */
-#define WM831X_BKUP_BATT_STS_WIDTH                   1  /* BKUP_BATT_STS */
-#define WM831X_BKUP_CHG_VLIM                    0x0010  /* BKUP_CHG_VLIM */
-#define WM831X_BKUP_CHG_VLIM_MASK               0x0010  /* BKUP_CHG_VLIM */
-#define WM831X_BKUP_CHG_VLIM_SHIFT                   4  /* BKUP_CHG_VLIM */
-#define WM831X_BKUP_CHG_VLIM_WIDTH                   1  /* BKUP_CHG_VLIM */
-#define WM831X_BKUP_CHG_ILIM_MASK               0x0003  /* BKUP_CHG_ILIM - [1:0] */
-#define WM831X_BKUP_CHG_ILIM_SHIFT                   0  /* BKUP_CHG_ILIM - [1:0] */
-#define WM831X_BKUP_CHG_ILIM_WIDTH                   2  /* BKUP_CHG_ILIM - [1:0] */
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/mfd/wm831x/regulator.h b/ANDROID_3.4.5/include/linux/mfd/wm831x/regulator.h
deleted file mode 100644
index 955d30fc..00000000
--- a/ANDROID_3.4.5/include/linux/mfd/wm831x/regulator.h
+++ /dev/null
@@ -1,1218 +0,0 @@
-/*
- * linux/mfd/wm831x/regulator.h -- Regulator definitons for wm831x
- *
- * Copyright 2009 Wolfson Microelectronics PLC.
- *
- * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- */
-
-#ifndef __MFD_WM831X_REGULATOR_H__
-#define __MFD_WM831X_REGULATOR_H__
-
-/*
- * R16462 (0x404E) - Current Sink 1
- */
-#define WM831X_CS1_ENA                          0x8000  /* CS1_ENA */
-#define WM831X_CS1_ENA_MASK                     0x8000  /* CS1_ENA */
-#define WM831X_CS1_ENA_SHIFT                        15  /* CS1_ENA */
-#define WM831X_CS1_ENA_WIDTH                         1  /* CS1_ENA */
-#define WM831X_CS1_DRIVE                        0x4000  /* CS1_DRIVE */
-#define WM831X_CS1_DRIVE_MASK                   0x4000  /* CS1_DRIVE */
-#define WM831X_CS1_DRIVE_SHIFT                      14  /* CS1_DRIVE */
-#define WM831X_CS1_DRIVE_WIDTH                       1  /* CS1_DRIVE */
-#define WM831X_CS1_SLPENA                       0x1000  /* CS1_SLPENA */
-#define WM831X_CS1_SLPENA_MASK                  0x1000  /* CS1_SLPENA */
-#define WM831X_CS1_SLPENA_SHIFT                     12  /* CS1_SLPENA */
-#define WM831X_CS1_SLPENA_WIDTH                      1  /* CS1_SLPENA */
-#define WM831X_CS1_OFF_RAMP_MASK                0x0C00  /* CS1_OFF_RAMP - [11:10] */
-#define WM831X_CS1_OFF_RAMP_SHIFT                   10  /* CS1_OFF_RAMP - [11:10] */
-#define WM831X_CS1_OFF_RAMP_WIDTH                    2  /* CS1_OFF_RAMP - [11:10] */
-#define WM831X_CS1_ON_RAMP_MASK                 0x0300  /* CS1_ON_RAMP - [9:8] */
-#define WM831X_CS1_ON_RAMP_SHIFT                     8  /* CS1_ON_RAMP - [9:8] */
-#define WM831X_CS1_ON_RAMP_WIDTH                     2  /* CS1_ON_RAMP - [9:8] */
-#define WM831X_CS1_ISEL_MASK                    0x003F  /* CS1_ISEL - [5:0] */
-#define WM831X_CS1_ISEL_SHIFT                        0  /* CS1_ISEL - [5:0] */
-#define WM831X_CS1_ISEL_WIDTH                        6  /* CS1_ISEL - [5:0] */
-
-/*
- * R16463 (0x404F) - Current Sink 2
- */
-#define WM831X_CS2_ENA                          0x8000  /* CS2_ENA */
-#define WM831X_CS2_ENA_MASK                     0x8000  /* CS2_ENA */
-#define WM831X_CS2_ENA_SHIFT                        15  /* CS2_ENA */
-#define WM831X_CS2_ENA_WIDTH                         1  /* CS2_ENA */
-#define WM831X_CS2_DRIVE                        0x4000  /* CS2_DRIVE */
-#define WM831X_CS2_DRIVE_MASK                   0x4000  /* CS2_DRIVE */
-#define WM831X_CS2_DRIVE_SHIFT                      14  /* CS2_DRIVE */
-#define WM831X_CS2_DRIVE_WIDTH                       1  /* CS2_DRIVE */
-#define WM831X_CS2_SLPENA                       0x1000  /* CS2_SLPENA */
-#define WM831X_CS2_SLPENA_MASK                  0x1000  /* CS2_SLPENA */
-#define WM831X_CS2_SLPENA_SHIFT                     12  /* CS2_SLPENA */
-#define WM831X_CS2_SLPENA_WIDTH                      1  /* CS2_SLPENA */
-#define WM831X_CS2_OFF_RAMP_MASK                0x0C00  /* CS2_OFF_RAMP - [11:10] */
-#define WM831X_CS2_OFF_RAMP_SHIFT                   10  /* CS2_OFF_RAMP - [11:10] */
-#define WM831X_CS2_OFF_RAMP_WIDTH                    2  /* CS2_OFF_RAMP - [11:10] */
-#define WM831X_CS2_ON_RAMP_MASK                 0x0300  /* CS2_ON_RAMP - [9:8] */
-#define WM831X_CS2_ON_RAMP_SHIFT                     8  /* CS2_ON_RAMP - [9:8] */
-#define WM831X_CS2_ON_RAMP_WIDTH                     2  /* CS2_ON_RAMP - [9:8] */
-#define WM831X_CS2_ISEL_MASK                    0x003F  /* CS2_ISEL - [5:0] */
-#define WM831X_CS2_ISEL_SHIFT                        0  /* CS2_ISEL - [5:0] */
-#define WM831X_CS2_ISEL_WIDTH                        6  /* CS2_ISEL - [5:0] */
-
-/*
- * R16464 (0x4050) - DCDC Enable
- */
-#define WM831X_EPE2_ENA                         0x0080  /* EPE2_ENA */
-#define WM831X_EPE2_ENA_MASK                    0x0080  /* EPE2_ENA */
-#define WM831X_EPE2_ENA_SHIFT                        7  /* EPE2_ENA */
-#define WM831X_EPE2_ENA_WIDTH                        1  /* EPE2_ENA */
-#define WM831X_EPE1_ENA                         0x0040  /* EPE1_ENA */
-#define WM831X_EPE1_ENA_MASK                    0x0040  /* EPE1_ENA */
-#define WM831X_EPE1_ENA_SHIFT                        6  /* EPE1_ENA */
-#define WM831X_EPE1_ENA_WIDTH                        1  /* EPE1_ENA */
-#define WM831X_DC4_ENA                          0x0008  /* DC4_ENA */
-#define WM831X_DC4_ENA_MASK                     0x0008  /* DC4_ENA */
-#define WM831X_DC4_ENA_SHIFT                         3  /* DC4_ENA */
-#define WM831X_DC4_ENA_WIDTH                         1  /* DC4_ENA */
-#define WM831X_DC3_ENA                          0x0004  /* DC3_ENA */
-#define WM831X_DC3_ENA_MASK                     0x0004  /* DC3_ENA */
-#define WM831X_DC3_ENA_SHIFT                         2  /* DC3_ENA */
-#define WM831X_DC3_ENA_WIDTH                         1  /* DC3_ENA */
-#define WM831X_DC2_ENA                          0x0002  /* DC2_ENA */
-#define WM831X_DC2_ENA_MASK                     0x0002  /* DC2_ENA */
-#define WM831X_DC2_ENA_SHIFT                         1  /* DC2_ENA */
-#define WM831X_DC2_ENA_WIDTH                         1  /* DC2_ENA */
-#define WM831X_DC1_ENA                          0x0001  /* DC1_ENA */
-#define WM831X_DC1_ENA_MASK                     0x0001  /* DC1_ENA */
-#define WM831X_DC1_ENA_SHIFT                         0  /* DC1_ENA */
-#define WM831X_DC1_ENA_WIDTH                         1  /* DC1_ENA */
-
-/*
- * R16465 (0x4051) - LDO Enable
- */
-#define WM831X_LDO11_ENA                        0x0400  /* LDO11_ENA */
-#define WM831X_LDO11_ENA_MASK                   0x0400  /* LDO11_ENA */
-#define WM831X_LDO11_ENA_SHIFT                      10  /* LDO11_ENA */
-#define WM831X_LDO11_ENA_WIDTH                       1  /* LDO11_ENA */
-#define WM831X_LDO10_ENA                        0x0200  /* LDO10_ENA */
-#define WM831X_LDO10_ENA_MASK                   0x0200  /* LDO10_ENA */
-#define WM831X_LDO10_ENA_SHIFT                       9  /* LDO10_ENA */
-#define WM831X_LDO10_ENA_WIDTH                       1  /* LDO10_ENA */
-#define WM831X_LDO9_ENA                         0x0100  /* LDO9_ENA */
-#define WM831X_LDO9_ENA_MASK                    0x0100  /* LDO9_ENA */
-#define WM831X_LDO9_ENA_SHIFT                        8  /* LDO9_ENA */
-#define WM831X_LDO9_ENA_WIDTH                        1  /* LDO9_ENA */
-#define WM831X_LDO8_ENA                         0x0080  /* LDO8_ENA */
-#define WM831X_LDO8_ENA_MASK                    0x0080  /* LDO8_ENA */
-#define WM831X_LDO8_ENA_SHIFT                        7  /* LDO8_ENA */
-#define WM831X_LDO8_ENA_WIDTH                        1  /* LDO8_ENA */
-#define WM831X_LDO7_ENA                         0x0040  /* LDO7_ENA */
-#define WM831X_LDO7_ENA_MASK                    0x0040  /* LDO7_ENA */
-#define WM831X_LDO7_ENA_SHIFT                        6  /* LDO7_ENA */
-#define WM831X_LDO7_ENA_WIDTH                        1  /* LDO7_ENA */
-#define WM831X_LDO6_ENA                         0x0020  /* LDO6_ENA */
-#define WM831X_LDO6_ENA_MASK                    0x0020  /* LDO6_ENA */
-#define WM831X_LDO6_ENA_SHIFT                        5  /* LDO6_ENA */
-#define WM831X_LDO6_ENA_WIDTH                        1  /* LDO6_ENA */
-#define WM831X_LDO5_ENA                         0x0010  /* LDO5_ENA */
-#define WM831X_LDO5_ENA_MASK                    0x0010  /* LDO5_ENA */
-#define WM831X_LDO5_ENA_SHIFT                        4  /* LDO5_ENA */
-#define WM831X_LDO5_ENA_WIDTH                        1  /* LDO5_ENA */
-#define WM831X_LDO4_ENA                         0x0008  /* LDO4_ENA */
-#define WM831X_LDO4_ENA_MASK                    0x0008  /* LDO4_ENA */
-#define WM831X_LDO4_ENA_SHIFT                        3  /* LDO4_ENA */
-#define WM831X_LDO4_ENA_WIDTH                        1  /* LDO4_ENA */
-#define WM831X_LDO3_ENA                         0x0004  /* LDO3_ENA */
-#define WM831X_LDO3_ENA_MASK                    0x0004  /* LDO3_ENA */
-#define WM831X_LDO3_ENA_SHIFT                        2  /* LDO3_ENA */
-#define WM831X_LDO3_ENA_WIDTH                        1  /* LDO3_ENA */
-#define WM831X_LDO2_ENA                         0x0002  /* LDO2_ENA */
-#define WM831X_LDO2_ENA_MASK                    0x0002  /* LDO2_ENA */
-#define WM831X_LDO2_ENA_SHIFT                        1  /* LDO2_ENA */
-#define WM831X_LDO2_ENA_WIDTH                        1  /* LDO2_ENA */
-#define WM831X_LDO1_ENA                         0x0001  /* LDO1_ENA */
-#define WM831X_LDO1_ENA_MASK                    0x0001  /* LDO1_ENA */
-#define WM831X_LDO1_ENA_SHIFT                        0  /* LDO1_ENA */
-#define WM831X_LDO1_ENA_WIDTH                        1  /* LDO1_ENA */
-
-/*
- * R16466 (0x4052) - DCDC Status
- */
-#define WM831X_EPE2_STS                         0x0080  /* EPE2_STS */
-#define WM831X_EPE2_STS_MASK                    0x0080  /* EPE2_STS */
-#define WM831X_EPE2_STS_SHIFT                        7  /* EPE2_STS */
-#define WM831X_EPE2_STS_WIDTH                        1  /* EPE2_STS */
-#define WM831X_EPE1_STS                         0x0040  /* EPE1_STS */
-#define WM831X_EPE1_STS_MASK                    0x0040  /* EPE1_STS */
-#define WM831X_EPE1_STS_SHIFT                        6  /* EPE1_STS */
-#define WM831X_EPE1_STS_WIDTH                        1  /* EPE1_STS */
-#define WM831X_DC4_STS                          0x0008  /* DC4_STS */
-#define WM831X_DC4_STS_MASK                     0x0008  /* DC4_STS */
-#define WM831X_DC4_STS_SHIFT                         3  /* DC4_STS */
-#define WM831X_DC4_STS_WIDTH                         1  /* DC4_STS */
-#define WM831X_DC3_STS                          0x0004  /* DC3_STS */
-#define WM831X_DC3_STS_MASK                     0x0004  /* DC3_STS */
-#define WM831X_DC3_STS_SHIFT                         2  /* DC3_STS */
-#define WM831X_DC3_STS_WIDTH                         1  /* DC3_STS */
-#define WM831X_DC2_STS                          0x0002  /* DC2_STS */
-#define WM831X_DC2_STS_MASK                     0x0002  /* DC2_STS */
-#define WM831X_DC2_STS_SHIFT                         1  /* DC2_STS */
-#define WM831X_DC2_STS_WIDTH                         1  /* DC2_STS */
-#define WM831X_DC1_STS                          0x0001  /* DC1_STS */
-#define WM831X_DC1_STS_MASK                     0x0001  /* DC1_STS */
-#define WM831X_DC1_STS_SHIFT                         0  /* DC1_STS */
-#define WM831X_DC1_STS_WIDTH                         1  /* DC1_STS */
-
-/*
- * R16467 (0x4053) - LDO Status
- */
-#define WM831X_LDO11_STS                        0x0400  /* LDO11_STS */
-#define WM831X_LDO11_STS_MASK                   0x0400  /* LDO11_STS */
-#define WM831X_LDO11_STS_SHIFT                      10  /* LDO11_STS */
-#define WM831X_LDO11_STS_WIDTH                       1  /* LDO11_STS */
-#define WM831X_LDO10_STS                        0x0200  /* LDO10_STS */
-#define WM831X_LDO10_STS_MASK                   0x0200  /* LDO10_STS */
-#define WM831X_LDO10_STS_SHIFT                       9  /* LDO10_STS */
-#define WM831X_LDO10_STS_WIDTH                       1  /* LDO10_STS */
-#define WM831X_LDO9_STS                         0x0100  /* LDO9_STS */
-#define WM831X_LDO9_STS_MASK                    0x0100  /* LDO9_STS */
-#define WM831X_LDO9_STS_SHIFT                        8  /* LDO9_STS */
-#define WM831X_LDO9_STS_WIDTH                        1  /* LDO9_STS */
-#define WM831X_LDO8_STS                         0x0080  /* LDO8_STS */
-#define WM831X_LDO8_STS_MASK                    0x0080  /* LDO8_STS */
-#define WM831X_LDO8_STS_SHIFT                        7  /* LDO8_STS */
-#define WM831X_LDO8_STS_WIDTH                        1  /* LDO8_STS */
-#define WM831X_LDO7_STS                         0x0040  /* LDO7_STS */
-#define WM831X_LDO7_STS_MASK                    0x0040  /* LDO7_STS */
-#define WM831X_LDO7_STS_SHIFT                        6  /* LDO7_STS */
-#define WM831X_LDO7_STS_WIDTH                        1  /* LDO7_STS */
-#define WM831X_LDO6_STS                         0x0020  /* LDO6_STS */
-#define WM831X_LDO6_STS_MASK                    0x0020  /* LDO6_STS */
-#define WM831X_LDO6_STS_SHIFT                        5  /* LDO6_STS */
-#define WM831X_LDO6_STS_WIDTH                        1  /* LDO6_STS */
-#define WM831X_LDO5_STS                         0x0010  /* LDO5_STS */
-#define WM831X_LDO5_STS_MASK                    0x0010  /* LDO5_STS */
-#define WM831X_LDO5_STS_SHIFT                        4  /* LDO5_STS */
-#define WM831X_LDO5_STS_WIDTH                        1  /* LDO5_STS */
-#define WM831X_LDO4_STS                         0x0008  /* LDO4_STS */
-#define WM831X_LDO4_STS_MASK                    0x0008  /* LDO4_STS */
-#define WM831X_LDO4_STS_SHIFT                        3  /* LDO4_STS */
-#define WM831X_LDO4_STS_WIDTH                        1  /* LDO4_STS */
-#define WM831X_LDO3_STS                         0x0004  /* LDO3_STS */
-#define WM831X_LDO3_STS_MASK                    0x0004  /* LDO3_STS */
-#define WM831X_LDO3_STS_SHIFT                        2  /* LDO3_STS */
-#define WM831X_LDO3_STS_WIDTH                        1  /* LDO3_STS */
-#define WM831X_LDO2_STS                         0x0002  /* LDO2_STS */
-#define WM831X_LDO2_STS_MASK                    0x0002  /* LDO2_STS */
-#define WM831X_LDO2_STS_SHIFT                        1  /* LDO2_STS */
-#define WM831X_LDO2_STS_WIDTH                        1  /* LDO2_STS */
-#define WM831X_LDO1_STS                         0x0001  /* LDO1_STS */
-#define WM831X_LDO1_STS_MASK                    0x0001  /* LDO1_STS */
-#define WM831X_LDO1_STS_SHIFT                        0  /* LDO1_STS */
-#define WM831X_LDO1_STS_WIDTH                        1  /* LDO1_STS */
-
-/*
- * R16468 (0x4054) - DCDC UV Status
- */
-#define WM831X_DC2_OV_STS                       0x2000  /* DC2_OV_STS */
-#define WM831X_DC2_OV_STS_MASK                  0x2000  /* DC2_OV_STS */
-#define WM831X_DC2_OV_STS_SHIFT                     13  /* DC2_OV_STS */
-#define WM831X_DC2_OV_STS_WIDTH                      1  /* DC2_OV_STS */
-#define WM831X_DC1_OV_STS                       0x1000  /* DC1_OV_STS */
-#define WM831X_DC1_OV_STS_MASK                  0x1000  /* DC1_OV_STS */
-#define WM831X_DC1_OV_STS_SHIFT                     12  /* DC1_OV_STS */
-#define WM831X_DC1_OV_STS_WIDTH                      1  /* DC1_OV_STS */
-#define WM831X_DC2_HC_STS                       0x0200  /* DC2_HC_STS */
-#define WM831X_DC2_HC_STS_MASK                  0x0200  /* DC2_HC_STS */
-#define WM831X_DC2_HC_STS_SHIFT                      9  /* DC2_HC_STS */
-#define WM831X_DC2_HC_STS_WIDTH                      1  /* DC2_HC_STS */
-#define WM831X_DC1_HC_STS                       0x0100  /* DC1_HC_STS */
-#define WM831X_DC1_HC_STS_MASK                  0x0100  /* DC1_HC_STS */
-#define WM831X_DC1_HC_STS_SHIFT                      8  /* DC1_HC_STS */
-#define WM831X_DC1_HC_STS_WIDTH                      1  /* DC1_HC_STS */
-#define WM831X_DC4_UV_STS                       0x0008  /* DC4_UV_STS */
-#define WM831X_DC4_UV_STS_MASK                  0x0008  /* DC4_UV_STS */
-#define WM831X_DC4_UV_STS_SHIFT                      3  /* DC4_UV_STS */
-#define WM831X_DC4_UV_STS_WIDTH                      1  /* DC4_UV_STS */
-#define WM831X_DC3_UV_STS                       0x0004  /* DC3_UV_STS */
-#define WM831X_DC3_UV_STS_MASK                  0x0004  /* DC3_UV_STS */
-#define WM831X_DC3_UV_STS_SHIFT                      2  /* DC3_UV_STS */
-#define WM831X_DC3_UV_STS_WIDTH                      1  /* DC3_UV_STS */
-#define WM831X_DC2_UV_STS                       0x0002  /* DC2_UV_STS */
-#define WM831X_DC2_UV_STS_MASK                  0x0002  /* DC2_UV_STS */
-#define WM831X_DC2_UV_STS_SHIFT                      1  /* DC2_UV_STS */
-#define WM831X_DC2_UV_STS_WIDTH                      1  /* DC2_UV_STS */
-#define WM831X_DC1_UV_STS                       0x0001  /* DC1_UV_STS */
-#define WM831X_DC1_UV_STS_MASK                  0x0001  /* DC1_UV_STS */
-#define WM831X_DC1_UV_STS_SHIFT                      0  /* DC1_UV_STS */
-#define WM831X_DC1_UV_STS_WIDTH                      1  /* DC1_UV_STS */
-
-/*
- * R16469 (0x4055) - LDO UV Status
- */
-#define WM831X_INTLDO_UV_STS                    0x8000  /* INTLDO_UV_STS */
-#define WM831X_INTLDO_UV_STS_MASK               0x8000  /* INTLDO_UV_STS */
-#define WM831X_INTLDO_UV_STS_SHIFT                  15  /* INTLDO_UV_STS */
-#define WM831X_INTLDO_UV_STS_WIDTH                   1  /* INTLDO_UV_STS */
-#define WM831X_LDO10_UV_STS                     0x0200  /* LDO10_UV_STS */
-#define WM831X_LDO10_UV_STS_MASK                0x0200  /* LDO10_UV_STS */
-#define WM831X_LDO10_UV_STS_SHIFT                    9  /* LDO10_UV_STS */
-#define WM831X_LDO10_UV_STS_WIDTH                    1  /* LDO10_UV_STS */
-#define WM831X_LDO9_UV_STS                      0x0100  /* LDO9_UV_STS */
-#define WM831X_LDO9_UV_STS_MASK                 0x0100  /* LDO9_UV_STS */
-#define WM831X_LDO9_UV_STS_SHIFT                     8  /* LDO9_UV_STS */
-#define WM831X_LDO9_UV_STS_WIDTH                     1  /* LDO9_UV_STS */
-#define WM831X_LDO8_UV_STS                      0x0080  /* LDO8_UV_STS */
-#define WM831X_LDO8_UV_STS_MASK                 0x0080  /* LDO8_UV_STS */
-#define WM831X_LDO8_UV_STS_SHIFT                     7  /* LDO8_UV_STS */
-#define WM831X_LDO8_UV_STS_WIDTH                     1  /* LDO8_UV_STS */
-#define WM831X_LDO7_UV_STS                      0x0040  /* LDO7_UV_STS */
-#define WM831X_LDO7_UV_STS_MASK                 0x0040  /* LDO7_UV_STS */
-#define WM831X_LDO7_UV_STS_SHIFT                     6  /* LDO7_UV_STS */
-#define WM831X_LDO7_UV_STS_WIDTH                     1  /* LDO7_UV_STS */
-#define WM831X_LDO6_UV_STS                      0x0020  /* LDO6_UV_STS */
-#define WM831X_LDO6_UV_STS_MASK                 0x0020  /* LDO6_UV_STS */
-#define WM831X_LDO6_UV_STS_SHIFT                     5  /* LDO6_UV_STS */
-#define WM831X_LDO6_UV_STS_WIDTH                     1  /* LDO6_UV_STS */
-#define WM831X_LDO5_UV_STS                      0x0010  /* LDO5_UV_STS */
-#define WM831X_LDO5_UV_STS_MASK                 0x0010  /* LDO5_UV_STS */
-#define WM831X_LDO5_UV_STS_SHIFT                     4  /* LDO5_UV_STS */
-#define WM831X_LDO5_UV_STS_WIDTH                     1  /* LDO5_UV_STS */
-#define WM831X_LDO4_UV_STS                      0x0008  /* LDO4_UV_STS */
-#define WM831X_LDO4_UV_STS_MASK                 0x0008  /* LDO4_UV_STS */
-#define WM831X_LDO4_UV_STS_SHIFT                     3  /* LDO4_UV_STS */
-#define WM831X_LDO4_UV_STS_WIDTH                     1  /* LDO4_UV_STS */
-#define WM831X_LDO3_UV_STS                      0x0004  /* LDO3_UV_STS */
-#define WM831X_LDO3_UV_STS_MASK                 0x0004  /* LDO3_UV_STS */
-#define WM831X_LDO3_UV_STS_SHIFT                     2  /* LDO3_UV_STS */
-#define WM831X_LDO3_UV_STS_WIDTH                     1  /* LDO3_UV_STS */
-#define WM831X_LDO2_UV_STS                      0x0002  /* LDO2_UV_STS */
-#define WM831X_LDO2_UV_STS_MASK                 0x0002  /* LDO2_UV_STS */
-#define WM831X_LDO2_UV_STS_SHIFT                     1  /* LDO2_UV_STS */
-#define WM831X_LDO2_UV_STS_WIDTH                     1  /* LDO2_UV_STS */
-#define WM831X_LDO1_UV_STS                      0x0001  /* LDO1_UV_STS */
-#define WM831X_LDO1_UV_STS_MASK                 0x0001  /* LDO1_UV_STS */
-#define WM831X_LDO1_UV_STS_SHIFT                     0  /* LDO1_UV_STS */
-#define WM831X_LDO1_UV_STS_WIDTH                     1  /* LDO1_UV_STS */
-
-/*
- * R16470 (0x4056) - DC1 Control 1
- */
-#define WM831X_DC1_RATE_MASK                    0xC000  /* DC1_RATE - [15:14] */
-#define WM831X_DC1_RATE_SHIFT                       14  /* DC1_RATE - [15:14] */
-#define WM831X_DC1_RATE_WIDTH                        2  /* DC1_RATE - [15:14] */
-#define WM831X_DC1_PHASE                        0x1000  /* DC1_PHASE */
-#define WM831X_DC1_PHASE_MASK                   0x1000  /* DC1_PHASE */
-#define WM831X_DC1_PHASE_SHIFT                      12  /* DC1_PHASE */
-#define WM831X_DC1_PHASE_WIDTH                       1  /* DC1_PHASE */
-#define WM831X_DC1_FREQ_MASK                    0x0300  /* DC1_FREQ - [9:8] */
-#define WM831X_DC1_FREQ_SHIFT                        8  /* DC1_FREQ - [9:8] */
-#define WM831X_DC1_FREQ_WIDTH                        2  /* DC1_FREQ - [9:8] */
-#define WM831X_DC1_FLT                          0x0080  /* DC1_FLT */
-#define WM831X_DC1_FLT_MASK                     0x0080  /* DC1_FLT */
-#define WM831X_DC1_FLT_SHIFT                         7  /* DC1_FLT */
-#define WM831X_DC1_FLT_WIDTH                         1  /* DC1_FLT */
-#define WM831X_DC1_SOFT_START_MASK              0x0030  /* DC1_SOFT_START - [5:4] */
-#define WM831X_DC1_SOFT_START_SHIFT                  4  /* DC1_SOFT_START - [5:4] */
-#define WM831X_DC1_SOFT_START_WIDTH                  2  /* DC1_SOFT_START - [5:4] */
-#define WM831X_DC1_CAP_MASK                     0x0003  /* DC1_CAP - [1:0] */
-#define WM831X_DC1_CAP_SHIFT                         0  /* DC1_CAP - [1:0] */
-#define WM831X_DC1_CAP_WIDTH                         2  /* DC1_CAP - [1:0] */
-
-/*
- * R16471 (0x4057) - DC1 Control 2
- */
-#define WM831X_DC1_ERR_ACT_MASK                 0xC000  /* DC1_ERR_ACT - [15:14] */
-#define WM831X_DC1_ERR_ACT_SHIFT                    14  /* DC1_ERR_ACT - [15:14] */
-#define WM831X_DC1_ERR_ACT_WIDTH                     2  /* DC1_ERR_ACT - [15:14] */
-#define WM831X_DC1_HWC_SRC_MASK                 0x1800  /* DC1_HWC_SRC - [12:11] */
-#define WM831X_DC1_HWC_SRC_SHIFT                    11  /* DC1_HWC_SRC - [12:11] */
-#define WM831X_DC1_HWC_SRC_WIDTH                     2  /* DC1_HWC_SRC - [12:11] */
-#define WM831X_DC1_HWC_VSEL                     0x0400  /* DC1_HWC_VSEL */
-#define WM831X_DC1_HWC_VSEL_MASK                0x0400  /* DC1_HWC_VSEL */
-#define WM831X_DC1_HWC_VSEL_SHIFT                   10  /* DC1_HWC_VSEL */
-#define WM831X_DC1_HWC_VSEL_WIDTH                    1  /* DC1_HWC_VSEL */
-#define WM831X_DC1_HWC_MODE_MASK                0x0300  /* DC1_HWC_MODE - [9:8] */
-#define WM831X_DC1_HWC_MODE_SHIFT                    8  /* DC1_HWC_MODE - [9:8] */
-#define WM831X_DC1_HWC_MODE_WIDTH                    2  /* DC1_HWC_MODE - [9:8] */
-#define WM831X_DC1_HC_THR_MASK                  0x0070  /* DC1_HC_THR - [6:4] */
-#define WM831X_DC1_HC_THR_SHIFT                      4  /* DC1_HC_THR - [6:4] */
-#define WM831X_DC1_HC_THR_WIDTH                      3  /* DC1_HC_THR - [6:4] */
-#define WM831X_DC1_HC_IND_ENA                   0x0001  /* DC1_HC_IND_ENA */
-#define WM831X_DC1_HC_IND_ENA_MASK              0x0001  /* DC1_HC_IND_ENA */
-#define WM831X_DC1_HC_IND_ENA_SHIFT                  0  /* DC1_HC_IND_ENA */
-#define WM831X_DC1_HC_IND_ENA_WIDTH                  1  /* DC1_HC_IND_ENA */
-
-/*
- * R16472 (0x4058) - DC1 ON Config
- */
-#define WM831X_DC1_ON_SLOT_MASK                 0xE000  /* DC1_ON_SLOT - [15:13] */
-#define WM831X_DC1_ON_SLOT_SHIFT                    13  /* DC1_ON_SLOT - [15:13] */
-#define WM831X_DC1_ON_SLOT_WIDTH                     3  /* DC1_ON_SLOT - [15:13] */
-#define WM831X_DC1_ON_MODE_MASK                 0x0300  /* DC1_ON_MODE - [9:8] */
-#define WM831X_DC1_ON_MODE_SHIFT                     8  /* DC1_ON_MODE - [9:8] */
-#define WM831X_DC1_ON_MODE_WIDTH                     2  /* DC1_ON_MODE - [9:8] */
-#define WM831X_DC1_ON_VSEL_MASK                 0x007F  /* DC1_ON_VSEL - [6:0] */
-#define WM831X_DC1_ON_VSEL_SHIFT                     0  /* DC1_ON_VSEL - [6:0] */
-#define WM831X_DC1_ON_VSEL_WIDTH                     7  /* DC1_ON_VSEL - [6:0] */
-
-/*
- * R16473 (0x4059) - DC1 SLEEP Control
- */
-#define WM831X_DC1_SLP_SLOT_MASK                0xE000  /* DC1_SLP_SLOT - [15:13] */
-#define WM831X_DC1_SLP_SLOT_SHIFT                   13  /* DC1_SLP_SLOT - [15:13] */
-#define WM831X_DC1_SLP_SLOT_WIDTH                    3  /* DC1_SLP_SLOT - [15:13] */
-#define WM831X_DC1_SLP_MODE_MASK                0x0300  /* DC1_SLP_MODE - [9:8] */
-#define WM831X_DC1_SLP_MODE_SHIFT                    8  /* DC1_SLP_MODE - [9:8] */
-#define WM831X_DC1_SLP_MODE_WIDTH                    2  /* DC1_SLP_MODE - [9:8] */
-#define WM831X_DC1_SLP_VSEL_MASK                0x007F  /* DC1_SLP_VSEL - [6:0] */
-#define WM831X_DC1_SLP_VSEL_SHIFT                    0  /* DC1_SLP_VSEL - [6:0] */
-#define WM831X_DC1_SLP_VSEL_WIDTH                    7  /* DC1_SLP_VSEL - [6:0] */
-
-/*
- * R16474 (0x405A) - DC1 DVS Control
- */
-#define WM831X_DC1_DVS_SRC_MASK                 0x1800  /* DC1_DVS_SRC - [12:11] */
-#define WM831X_DC1_DVS_SRC_SHIFT                    11  /* DC1_DVS_SRC - [12:11] */
-#define WM831X_DC1_DVS_SRC_WIDTH                     2  /* DC1_DVS_SRC - [12:11] */
-#define WM831X_DC1_DVS_VSEL_MASK                0x007F  /* DC1_DVS_VSEL - [6:0] */
-#define WM831X_DC1_DVS_VSEL_SHIFT                    0  /* DC1_DVS_VSEL - [6:0] */
-#define WM831X_DC1_DVS_VSEL_WIDTH                    7  /* DC1_DVS_VSEL - [6:0] */
-
-/*
- * R16475 (0x405B) - DC2 Control 1
- */
-#define WM831X_DC2_RATE_MASK                    0xC000  /* DC2_RATE - [15:14] */
-#define WM831X_DC2_RATE_SHIFT                       14  /* DC2_RATE - [15:14] */
-#define WM831X_DC2_RATE_WIDTH                        2  /* DC2_RATE - [15:14] */
-#define WM831X_DC2_PHASE                        0x1000  /* DC2_PHASE */
-#define WM831X_DC2_PHASE_MASK                   0x1000  /* DC2_PHASE */
-#define WM831X_DC2_PHASE_SHIFT                      12  /* DC2_PHASE */
-#define WM831X_DC2_PHASE_WIDTH                       1  /* DC2_PHASE */
-#define WM831X_DC2_FREQ_MASK                    0x0300  /* DC2_FREQ - [9:8] */
-#define WM831X_DC2_FREQ_SHIFT                        8  /* DC2_FREQ - [9:8] */
-#define WM831X_DC2_FREQ_WIDTH                        2  /* DC2_FREQ - [9:8] */
-#define WM831X_DC2_FLT                          0x0080  /* DC2_FLT */
-#define WM831X_DC2_FLT_MASK                     0x0080  /* DC2_FLT */
-#define WM831X_DC2_FLT_SHIFT                         7  /* DC2_FLT */
-#define WM831X_DC2_FLT_WIDTH                         1  /* DC2_FLT */
-#define WM831X_DC2_SOFT_START_MASK              0x0030  /* DC2_SOFT_START - [5:4] */
-#define WM831X_DC2_SOFT_START_SHIFT                  4  /* DC2_SOFT_START - [5:4] */
-#define WM831X_DC2_SOFT_START_WIDTH                  2  /* DC2_SOFT_START - [5:4] */
-#define WM831X_DC2_CAP_MASK                     0x0003  /* DC2_CAP - [1:0] */
-#define WM831X_DC2_CAP_SHIFT                         0  /* DC2_CAP - [1:0] */
-#define WM831X_DC2_CAP_WIDTH                         2  /* DC2_CAP - [1:0] */
-
-/*
- * R16476 (0x405C) - DC2 Control 2
- */
-#define WM831X_DC2_ERR_ACT_MASK                 0xC000  /* DC2_ERR_ACT - [15:14] */
-#define WM831X_DC2_ERR_ACT_SHIFT                    14  /* DC2_ERR_ACT - [15:14] */
-#define WM831X_DC2_ERR_ACT_WIDTH                     2  /* DC2_ERR_ACT - [15:14] */
-#define WM831X_DC2_HWC_SRC_MASK                 0x1800  /* DC2_HWC_SRC - [12:11] */
-#define WM831X_DC2_HWC_SRC_SHIFT                    11  /* DC2_HWC_SRC - [12:11] */
-#define WM831X_DC2_HWC_SRC_WIDTH                     2  /* DC2_HWC_SRC - [12:11] */
-#define WM831X_DC2_HWC_VSEL                     0x0400  /* DC2_HWC_VSEL */
-#define WM831X_DC2_HWC_VSEL_MASK                0x0400  /* DC2_HWC_VSEL */
-#define WM831X_DC2_HWC_VSEL_SHIFT                   10  /* DC2_HWC_VSEL */
-#define WM831X_DC2_HWC_VSEL_WIDTH                    1  /* DC2_HWC_VSEL */
-#define WM831X_DC2_HWC_MODE_MASK                0x0300  /* DC2_HWC_MODE - [9:8] */
-#define WM831X_DC2_HWC_MODE_SHIFT                    8  /* DC2_HWC_MODE - [9:8] */
-#define WM831X_DC2_HWC_MODE_WIDTH                    2  /* DC2_HWC_MODE - [9:8] */
-#define WM831X_DC2_HC_THR_MASK                  0x0070  /* DC2_HC_THR - [6:4] */
-#define WM831X_DC2_HC_THR_SHIFT                      4  /* DC2_HC_THR - [6:4] */
-#define WM831X_DC2_HC_THR_WIDTH                      3  /* DC2_HC_THR - [6:4] */
-#define WM831X_DC2_HC_IND_ENA                   0x0001  /* DC2_HC_IND_ENA */
-#define WM831X_DC2_HC_IND_ENA_MASK              0x0001  /* DC2_HC_IND_ENA */
-#define WM831X_DC2_HC_IND_ENA_SHIFT                  0  /* DC2_HC_IND_ENA */
-#define WM831X_DC2_HC_IND_ENA_WIDTH                  1  /* DC2_HC_IND_ENA */
-
-/*
- * R16477 (0x405D) - DC2 ON Config
- */
-#define WM831X_DC2_ON_SLOT_MASK                 0xE000  /* DC2_ON_SLOT - [15:13] */
-#define WM831X_DC2_ON_SLOT_SHIFT                    13  /* DC2_ON_SLOT - [15:13] */
-#define WM831X_DC2_ON_SLOT_WIDTH                     3  /* DC2_ON_SLOT - [15:13] */
-#define WM831X_DC2_ON_MODE_MASK                 0x0300  /* DC2_ON_MODE - [9:8] */
-#define WM831X_DC2_ON_MODE_SHIFT                     8  /* DC2_ON_MODE - [9:8] */
-#define WM831X_DC2_ON_MODE_WIDTH                     2  /* DC2_ON_MODE - [9:8] */
-#define WM831X_DC2_ON_VSEL_MASK                 0x007F  /* DC2_ON_VSEL - [6:0] */
-#define WM831X_DC2_ON_VSEL_SHIFT                     0  /* DC2_ON_VSEL - [6:0] */
-#define WM831X_DC2_ON_VSEL_WIDTH                     7  /* DC2_ON_VSEL - [6:0] */
-
-/*
- * R16478 (0x405E) - DC2 SLEEP Control
- */
-#define WM831X_DC2_SLP_SLOT_MASK                0xE000  /* DC2_SLP_SLOT - [15:13] */
-#define WM831X_DC2_SLP_SLOT_SHIFT                   13  /* DC2_SLP_SLOT - [15:13] */
-#define WM831X_DC2_SLP_SLOT_WIDTH                    3  /* DC2_SLP_SLOT - [15:13] */
-#define WM831X_DC2_SLP_MODE_MASK                0x0300  /* DC2_SLP_MODE - [9:8] */
-#define WM831X_DC2_SLP_MODE_SHIFT                    8  /* DC2_SLP_MODE - [9:8] */
-#define WM831X_DC2_SLP_MODE_WIDTH                    2  /* DC2_SLP_MODE - [9:8] */
-#define WM831X_DC2_SLP_VSEL_MASK                0x007F  /* DC2_SLP_VSEL - [6:0] */
-#define WM831X_DC2_SLP_VSEL_SHIFT                    0  /* DC2_SLP_VSEL - [6:0] */
-#define WM831X_DC2_SLP_VSEL_WIDTH                    7  /* DC2_SLP_VSEL - [6:0] */
-
-/*
- * R16479 (0x405F) - DC2 DVS Control
- */
-#define WM831X_DC2_DVS_SRC_MASK                 0x1800  /* DC2_DVS_SRC - [12:11] */
-#define WM831X_DC2_DVS_SRC_SHIFT                    11  /* DC2_DVS_SRC - [12:11] */
-#define WM831X_DC2_DVS_SRC_WIDTH                     2  /* DC2_DVS_SRC - [12:11] */
-#define WM831X_DC2_DVS_VSEL_MASK                0x007F  /* DC2_DVS_VSEL - [6:0] */
-#define WM831X_DC2_DVS_VSEL_SHIFT                    0  /* DC2_DVS_VSEL - [6:0] */
-#define WM831X_DC2_DVS_VSEL_WIDTH                    7  /* DC2_DVS_VSEL - [6:0] */
-
-/*
- * R16480 (0x4060) - DC3 Control 1
- */
-#define WM831X_DC3_PHASE                        0x1000  /* DC3_PHASE */
-#define WM831X_DC3_PHASE_MASK                   0x1000  /* DC3_PHASE */
-#define WM831X_DC3_PHASE_SHIFT                      12  /* DC3_PHASE */
-#define WM831X_DC3_PHASE_WIDTH                       1  /* DC3_PHASE */
-#define WM831X_DC3_FLT                          0x0080  /* DC3_FLT */
-#define WM831X_DC3_FLT_MASK                     0x0080  /* DC3_FLT */
-#define WM831X_DC3_FLT_SHIFT                         7  /* DC3_FLT */
-#define WM831X_DC3_FLT_WIDTH                         1  /* DC3_FLT */
-#define WM831X_DC3_SOFT_START_MASK              0x0030  /* DC3_SOFT_START - [5:4] */
-#define WM831X_DC3_SOFT_START_SHIFT                  4  /* DC3_SOFT_START - [5:4] */
-#define WM831X_DC3_SOFT_START_WIDTH                  2  /* DC3_SOFT_START - [5:4] */
-#define WM831X_DC3_STNBY_LIM_MASK               0x000C  /* DC3_STNBY_LIM - [3:2] */
-#define WM831X_DC3_STNBY_LIM_SHIFT                   2  /* DC3_STNBY_LIM - [3:2] */
-#define WM831X_DC3_STNBY_LIM_WIDTH                   2  /* DC3_STNBY_LIM - [3:2] */
-#define WM831X_DC3_CAP_MASK                     0x0003  /* DC3_CAP - [1:0] */
-#define WM831X_DC3_CAP_SHIFT                         0  /* DC3_CAP - [1:0] */
-#define WM831X_DC3_CAP_WIDTH                         2  /* DC3_CAP - [1:0] */
-
-/*
- * R16481 (0x4061) - DC3 Control 2
- */
-#define WM831X_DC3_ERR_ACT_MASK                 0xC000  /* DC3_ERR_ACT - [15:14] */
-#define WM831X_DC3_ERR_ACT_SHIFT                    14  /* DC3_ERR_ACT - [15:14] */
-#define WM831X_DC3_ERR_ACT_WIDTH                     2  /* DC3_ERR_ACT - [15:14] */
-#define WM831X_DC3_HWC_SRC_MASK                 0x1800  /* DC3_HWC_SRC - [12:11] */
-#define WM831X_DC3_HWC_SRC_SHIFT                    11  /* DC3_HWC_SRC - [12:11] */
-#define WM831X_DC3_HWC_SRC_WIDTH                     2  /* DC3_HWC_SRC - [12:11] */
-#define WM831X_DC3_HWC_VSEL                     0x0400  /* DC3_HWC_VSEL */
-#define WM831X_DC3_HWC_VSEL_MASK                0x0400  /* DC3_HWC_VSEL */
-#define WM831X_DC3_HWC_VSEL_SHIFT                   10  /* DC3_HWC_VSEL */
-#define WM831X_DC3_HWC_VSEL_WIDTH                    1  /* DC3_HWC_VSEL */
-#define WM831X_DC3_HWC_MODE_MASK                0x0300  /* DC3_HWC_MODE - [9:8] */
-#define WM831X_DC3_HWC_MODE_SHIFT                    8  /* DC3_HWC_MODE - [9:8] */
-#define WM831X_DC3_HWC_MODE_WIDTH                    2  /* DC3_HWC_MODE - [9:8] */
-#define WM831X_DC3_OVP                          0x0080  /* DC3_OVP */
-#define WM831X_DC3_OVP_MASK                     0x0080  /* DC3_OVP */
-#define WM831X_DC3_OVP_SHIFT                         7  /* DC3_OVP */
-#define WM831X_DC3_OVP_WIDTH                         1  /* DC3_OVP */
-
-/*
- * R16482 (0x4062) - DC3 ON Config
- */
-#define WM831X_DC3_ON_SLOT_MASK                 0xE000  /* DC3_ON_SLOT - [15:13] */
-#define WM831X_DC3_ON_SLOT_SHIFT                    13  /* DC3_ON_SLOT - [15:13] */
-#define WM831X_DC3_ON_SLOT_WIDTH                     3  /* DC3_ON_SLOT - [15:13] */
-#define WM831X_DC3_ON_MODE_MASK                 0x0300  /* DC3_ON_MODE - [9:8] */
-#define WM831X_DC3_ON_MODE_SHIFT                     8  /* DC3_ON_MODE - [9:8] */
-#define WM831X_DC3_ON_MODE_WIDTH                     2  /* DC3_ON_MODE - [9:8] */
-#define WM831X_DC3_ON_VSEL_MASK                 0x007F  /* DC3_ON_VSEL - [6:0] */
-#define WM831X_DC3_ON_VSEL_SHIFT                     0  /* DC3_ON_VSEL - [6:0] */
-#define WM831X_DC3_ON_VSEL_WIDTH                     7  /* DC3_ON_VSEL - [6:0] */
-
-/*
- * R16483 (0x4063) - DC3 SLEEP Control
- */
-#define WM831X_DC3_SLP_SLOT_MASK                0xE000  /* DC3_SLP_SLOT - [15:13] */
-#define WM831X_DC3_SLP_SLOT_SHIFT                   13  /* DC3_SLP_SLOT - [15:13] */
-#define WM831X_DC3_SLP_SLOT_WIDTH                    3  /* DC3_SLP_SLOT - [15:13] */
-#define WM831X_DC3_SLP_MODE_MASK                0x0300  /* DC3_SLP_MODE - [9:8] */
-#define WM831X_DC3_SLP_MODE_SHIFT                    8  /* DC3_SLP_MODE - [9:8] */
-#define WM831X_DC3_SLP_MODE_WIDTH                    2  /* DC3_SLP_MODE - [9:8] */
-#define WM831X_DC3_SLP_VSEL_MASK                0x007F  /* DC3_SLP_VSEL - [6:0] */
-#define WM831X_DC3_SLP_VSEL_SHIFT                    0  /* DC3_SLP_VSEL - [6:0] */
-#define WM831X_DC3_SLP_VSEL_WIDTH                    7  /* DC3_SLP_VSEL - [6:0] */
-
-/*
- * R16484 (0x4064) - DC4 Control
- */
-#define WM831X_DC4_ERR_ACT_MASK                 0xC000  /* DC4_ERR_ACT - [15:14] */
-#define WM831X_DC4_ERR_ACT_SHIFT                    14  /* DC4_ERR_ACT - [15:14] */
-#define WM831X_DC4_ERR_ACT_WIDTH                     2  /* DC4_ERR_ACT - [15:14] */
-#define WM831X_DC4_HWC_SRC_MASK                 0x1800  /* DC4_HWC_SRC - [12:11] */
-#define WM831X_DC4_HWC_SRC_SHIFT                    11  /* DC4_HWC_SRC - [12:11] */
-#define WM831X_DC4_HWC_SRC_WIDTH                     2  /* DC4_HWC_SRC - [12:11] */
-#define WM831X_DC4_HWC_MODE                     0x0100  /* DC4_HWC_MODE */
-#define WM831X_DC4_HWC_MODE_MASK                0x0100  /* DC4_HWC_MODE */
-#define WM831X_DC4_HWC_MODE_SHIFT                    8  /* DC4_HWC_MODE */
-#define WM831X_DC4_HWC_MODE_WIDTH                    1  /* DC4_HWC_MODE */
-#define WM831X_DC4_RANGE_MASK                   0x000C  /* DC4_RANGE - [3:2] */
-#define WM831X_DC4_RANGE_SHIFT                       2  /* DC4_RANGE - [3:2] */
-#define WM831X_DC4_RANGE_WIDTH                       2  /* DC4_RANGE - [3:2] */
-#define WM831X_DC4_FBSRC                        0x0001  /* DC4_FBSRC */
-#define WM831X_DC4_FBSRC_MASK                   0x0001  /* DC4_FBSRC */
-#define WM831X_DC4_FBSRC_SHIFT                       0  /* DC4_FBSRC */
-#define WM831X_DC4_FBSRC_WIDTH                       1  /* DC4_FBSRC */
-
-/*
- * R16485 (0x4065) - DC4 SLEEP Control
- */
-#define WM831X_DC4_SLPENA                       0x0100  /* DC4_SLPENA */
-#define WM831X_DC4_SLPENA_MASK                  0x0100  /* DC4_SLPENA */
-#define WM831X_DC4_SLPENA_SHIFT                      8  /* DC4_SLPENA */
-#define WM831X_DC4_SLPENA_WIDTH                      1  /* DC4_SLPENA */
-
-/*
- * R16488 (0x4068) - LDO1 Control
- */
-#define WM831X_LDO1_ERR_ACT_MASK                0xC000  /* LDO1_ERR_ACT - [15:14] */
-#define WM831X_LDO1_ERR_ACT_SHIFT                   14  /* LDO1_ERR_ACT - [15:14] */
-#define WM831X_LDO1_ERR_ACT_WIDTH                    2  /* LDO1_ERR_ACT - [15:14] */
-#define WM831X_LDO1_HWC_SRC_MASK                0x1800  /* LDO1_HWC_SRC - [12:11] */
-#define WM831X_LDO1_HWC_SRC_SHIFT                   11  /* LDO1_HWC_SRC - [12:11] */
-#define WM831X_LDO1_HWC_SRC_WIDTH                    2  /* LDO1_HWC_SRC - [12:11] */
-#define WM831X_LDO1_HWC_VSEL                    0x0400  /* LDO1_HWC_VSEL */
-#define WM831X_LDO1_HWC_VSEL_MASK               0x0400  /* LDO1_HWC_VSEL */
-#define WM831X_LDO1_HWC_VSEL_SHIFT                  10  /* LDO1_HWC_VSEL */
-#define WM831X_LDO1_HWC_VSEL_WIDTH                   1  /* LDO1_HWC_VSEL */
-#define WM831X_LDO1_HWC_MODE_MASK               0x0300  /* LDO1_HWC_MODE - [9:8] */
-#define WM831X_LDO1_HWC_MODE_SHIFT                   8  /* LDO1_HWC_MODE - [9:8] */
-#define WM831X_LDO1_HWC_MODE_WIDTH                   2  /* LDO1_HWC_MODE - [9:8] */
-#define WM831X_LDO1_FLT                         0x0080  /* LDO1_FLT */
-#define WM831X_LDO1_FLT_MASK                    0x0080  /* LDO1_FLT */
-#define WM831X_LDO1_FLT_SHIFT                        7  /* LDO1_FLT */
-#define WM831X_LDO1_FLT_WIDTH                        1  /* LDO1_FLT */
-#define WM831X_LDO1_SWI                         0x0040  /* LDO1_SWI */
-#define WM831X_LDO1_SWI_MASK                    0x0040  /* LDO1_SWI */
-#define WM831X_LDO1_SWI_SHIFT                        6  /* LDO1_SWI */
-#define WM831X_LDO1_SWI_WIDTH                        1  /* LDO1_SWI */
-#define WM831X_LDO1_LP_MODE                     0x0001  /* LDO1_LP_MODE */
-#define WM831X_LDO1_LP_MODE_MASK                0x0001  /* LDO1_LP_MODE */
-#define WM831X_LDO1_LP_MODE_SHIFT                    0  /* LDO1_LP_MODE */
-#define WM831X_LDO1_LP_MODE_WIDTH                    1  /* LDO1_LP_MODE */
-
-/*
- * R16489 (0x4069) - LDO1 ON Control
- */
-#define WM831X_LDO1_ON_SLOT_MASK                0xE000  /* LDO1_ON_SLOT - [15:13] */
-#define WM831X_LDO1_ON_SLOT_SHIFT                   13  /* LDO1_ON_SLOT - [15:13] */
-#define WM831X_LDO1_ON_SLOT_WIDTH                    3  /* LDO1_ON_SLOT - [15:13] */
-#define WM831X_LDO1_ON_MODE                     0x0100  /* LDO1_ON_MODE */
-#define WM831X_LDO1_ON_MODE_MASK                0x0100  /* LDO1_ON_MODE */
-#define WM831X_LDO1_ON_MODE_SHIFT                    8  /* LDO1_ON_MODE */
-#define WM831X_LDO1_ON_MODE_WIDTH                    1  /* LDO1_ON_MODE */
-#define WM831X_LDO1_ON_VSEL_MASK                0x001F  /* LDO1_ON_VSEL - [4:0] */
-#define WM831X_LDO1_ON_VSEL_SHIFT                    0  /* LDO1_ON_VSEL - [4:0] */
-#define WM831X_LDO1_ON_VSEL_WIDTH                    5  /* LDO1_ON_VSEL - [4:0] */
-
-/*
- * R16490 (0x406A) - LDO1 SLEEP Control
- */
-#define WM831X_LDO1_SLP_SLOT_MASK               0xE000  /* LDO1_SLP_SLOT - [15:13] */
-#define WM831X_LDO1_SLP_SLOT_SHIFT                  13  /* LDO1_SLP_SLOT - [15:13] */
-#define WM831X_LDO1_SLP_SLOT_WIDTH                   3  /* LDO1_SLP_SLOT - [15:13] */
-#define WM831X_LDO1_SLP_MODE                    0x0100  /* LDO1_SLP_MODE */
-#define WM831X_LDO1_SLP_MODE_MASK               0x0100  /* LDO1_SLP_MODE */
-#define WM831X_LDO1_SLP_MODE_SHIFT                   8  /* LDO1_SLP_MODE */
-#define WM831X_LDO1_SLP_MODE_WIDTH                   1  /* LDO1_SLP_MODE */
-#define WM831X_LDO1_SLP_VSEL_MASK               0x001F  /* LDO1_SLP_VSEL - [4:0] */
-#define WM831X_LDO1_SLP_VSEL_SHIFT                   0  /* LDO1_SLP_VSEL - [4:0] */
-#define WM831X_LDO1_SLP_VSEL_WIDTH                   5  /* LDO1_SLP_VSEL - [4:0] */
-
-/*
- * R16491 (0x406B) - LDO2 Control
- */
-#define WM831X_LDO2_ERR_ACT_MASK                0xC000  /* LDO2_ERR_ACT - [15:14] */
-#define WM831X_LDO2_ERR_ACT_SHIFT                   14  /* LDO2_ERR_ACT - [15:14] */
-#define WM831X_LDO2_ERR_ACT_WIDTH                    2  /* LDO2_ERR_ACT - [15:14] */
-#define WM831X_LDO2_HWC_SRC_MASK                0x1800  /* LDO2_HWC_SRC - [12:11] */
-#define WM831X_LDO2_HWC_SRC_SHIFT                   11  /* LDO2_HWC_SRC - [12:11] */
-#define WM831X_LDO2_HWC_SRC_WIDTH                    2  /* LDO2_HWC_SRC - [12:11] */
-#define WM831X_LDO2_HWC_VSEL                    0x0400  /* LDO2_HWC_VSEL */
-#define WM831X_LDO2_HWC_VSEL_MASK               0x0400  /* LDO2_HWC_VSEL */
-#define WM831X_LDO2_HWC_VSEL_SHIFT                  10  /* LDO2_HWC_VSEL */
-#define WM831X_LDO2_HWC_VSEL_WIDTH                   1  /* LDO2_HWC_VSEL */
-#define WM831X_LDO2_HWC_MODE_MASK               0x0300  /* LDO2_HWC_MODE - [9:8] */
-#define WM831X_LDO2_HWC_MODE_SHIFT                   8  /* LDO2_HWC_MODE - [9:8] */
-#define WM831X_LDO2_HWC_MODE_WIDTH                   2  /* LDO2_HWC_MODE - [9:8] */
-#define WM831X_LDO2_FLT                         0x0080  /* LDO2_FLT */
-#define WM831X_LDO2_FLT_MASK                    0x0080  /* LDO2_FLT */
-#define WM831X_LDO2_FLT_SHIFT                        7  /* LDO2_FLT */
-#define WM831X_LDO2_FLT_WIDTH                        1  /* LDO2_FLT */
-#define WM831X_LDO2_SWI                         0x0040  /* LDO2_SWI */
-#define WM831X_LDO2_SWI_MASK                    0x0040  /* LDO2_SWI */
-#define WM831X_LDO2_SWI_SHIFT                        6  /* LDO2_SWI */
-#define WM831X_LDO2_SWI_WIDTH                        1  /* LDO2_SWI */
-#define WM831X_LDO2_LP_MODE                     0x0001  /* LDO2_LP_MODE */
-#define WM831X_LDO2_LP_MODE_MASK                0x0001  /* LDO2_LP_MODE */
-#define WM831X_LDO2_LP_MODE_SHIFT                    0  /* LDO2_LP_MODE */
-#define WM831X_LDO2_LP_MODE_WIDTH                    1  /* LDO2_LP_MODE */
-
-/*
- * R16492 (0x406C) - LDO2 ON Control
- */
-#define WM831X_LDO2_ON_SLOT_MASK                0xE000  /* LDO2_ON_SLOT - [15:13] */
-#define WM831X_LDO2_ON_SLOT_SHIFT                   13  /* LDO2_ON_SLOT - [15:13] */
-#define WM831X_LDO2_ON_SLOT_WIDTH                    3  /* LDO2_ON_SLOT - [15:13] */
-#define WM831X_LDO2_ON_MODE                     0x0100  /* LDO2_ON_MODE */
-#define WM831X_LDO2_ON_MODE_MASK                0x0100  /* LDO2_ON_MODE */
-#define WM831X_LDO2_ON_MODE_SHIFT                    8  /* LDO2_ON_MODE */
-#define WM831X_LDO2_ON_MODE_WIDTH                    1  /* LDO2_ON_MODE */
-#define WM831X_LDO2_ON_VSEL_MASK                0x001F  /* LDO2_ON_VSEL - [4:0] */
-#define WM831X_LDO2_ON_VSEL_SHIFT                    0  /* LDO2_ON_VSEL - [4:0] */
-#define WM831X_LDO2_ON_VSEL_WIDTH                    5  /* LDO2_ON_VSEL - [4:0] */
-
-/*
- * R16493 (0x406D) - LDO2 SLEEP Control
- */
-#define WM831X_LDO2_SLP_SLOT_MASK               0xE000  /* LDO2_SLP_SLOT - [15:13] */
-#define WM831X_LDO2_SLP_SLOT_SHIFT                  13  /* LDO2_SLP_SLOT - [15:13] */
-#define WM831X_LDO2_SLP_SLOT_WIDTH                   3  /* LDO2_SLP_SLOT - [15:13] */
-#define WM831X_LDO2_SLP_MODE                    0x0100  /* LDO2_SLP_MODE */
-#define WM831X_LDO2_SLP_MODE_MASK               0x0100  /* LDO2_SLP_MODE */
-#define WM831X_LDO2_SLP_MODE_SHIFT                   8  /* LDO2_SLP_MODE */
-#define WM831X_LDO2_SLP_MODE_WIDTH                   1  /* LDO2_SLP_MODE */
-#define WM831X_LDO2_SLP_VSEL_MASK               0x001F  /* LDO2_SLP_VSEL - [4:0] */
-#define WM831X_LDO2_SLP_VSEL_SHIFT                   0  /* LDO2_SLP_VSEL - [4:0] */
-#define WM831X_LDO2_SLP_VSEL_WIDTH                   5  /* LDO2_SLP_VSEL - [4:0] */
-
-/*
- * R16494 (0x406E) - LDO3 Control
- */
-#define WM831X_LDO3_ERR_ACT_MASK                0xC000  /* LDO3_ERR_ACT - [15:14] */
-#define WM831X_LDO3_ERR_ACT_SHIFT                   14  /* LDO3_ERR_ACT - [15:14] */
-#define WM831X_LDO3_ERR_ACT_WIDTH                    2  /* LDO3_ERR_ACT - [15:14] */
-#define WM831X_LDO3_HWC_SRC_MASK                0x1800  /* LDO3_HWC_SRC - [12:11] */
-#define WM831X_LDO3_HWC_SRC_SHIFT                   11  /* LDO3_HWC_SRC - [12:11] */
-#define WM831X_LDO3_HWC_SRC_WIDTH                    2  /* LDO3_HWC_SRC - [12:11] */
-#define WM831X_LDO3_HWC_VSEL                    0x0400  /* LDO3_HWC_VSEL */
-#define WM831X_LDO3_HWC_VSEL_MASK               0x0400  /* LDO3_HWC_VSEL */
-#define WM831X_LDO3_HWC_VSEL_SHIFT                  10  /* LDO3_HWC_VSEL */
-#define WM831X_LDO3_HWC_VSEL_WIDTH                   1  /* LDO3_HWC_VSEL */
-#define WM831X_LDO3_HWC_MODE_MASK               0x0300  /* LDO3_HWC_MODE - [9:8] */
-#define WM831X_LDO3_HWC_MODE_SHIFT                   8  /* LDO3_HWC_MODE - [9:8] */
-#define WM831X_LDO3_HWC_MODE_WIDTH                   2  /* LDO3_HWC_MODE - [9:8] */
-#define WM831X_LDO3_FLT                         0x0080  /* LDO3_FLT */
-#define WM831X_LDO3_FLT_MASK                    0x0080  /* LDO3_FLT */
-#define WM831X_LDO3_FLT_SHIFT                        7  /* LDO3_FLT */
-#define WM831X_LDO3_FLT_WIDTH                        1  /* LDO3_FLT */
-#define WM831X_LDO3_SWI                         0x0040  /* LDO3_SWI */
-#define WM831X_LDO3_SWI_MASK                    0x0040  /* LDO3_SWI */
-#define WM831X_LDO3_SWI_SHIFT                        6  /* LDO3_SWI */
-#define WM831X_LDO3_SWI_WIDTH                        1  /* LDO3_SWI */
-#define WM831X_LDO3_LP_MODE                     0x0001  /* LDO3_LP_MODE */
-#define WM831X_LDO3_LP_MODE_MASK                0x0001  /* LDO3_LP_MODE */
-#define WM831X_LDO3_LP_MODE_SHIFT                    0  /* LDO3_LP_MODE */
-#define WM831X_LDO3_LP_MODE_WIDTH                    1  /* LDO3_LP_MODE */
-
-/*
- * R16495 (0x406F) - LDO3 ON Control
- */
-#define WM831X_LDO3_ON_SLOT_MASK                0xE000  /* LDO3_ON_SLOT - [15:13] */
-#define WM831X_LDO3_ON_SLOT_SHIFT                   13  /* LDO3_ON_SLOT - [15:13] */
-#define WM831X_LDO3_ON_SLOT_WIDTH                    3  /* LDO3_ON_SLOT - [15:13] */
-#define WM831X_LDO3_ON_MODE                     0x0100  /* LDO3_ON_MODE */
-#define WM831X_LDO3_ON_MODE_MASK                0x0100  /* LDO3_ON_MODE */
-#define WM831X_LDO3_ON_MODE_SHIFT                    8  /* LDO3_ON_MODE */
-#define WM831X_LDO3_ON_MODE_WIDTH                    1  /* LDO3_ON_MODE */
-#define WM831X_LDO3_ON_VSEL_MASK                0x001F  /* LDO3_ON_VSEL - [4:0] */
-#define WM831X_LDO3_ON_VSEL_SHIFT                    0  /* LDO3_ON_VSEL - [4:0] */
-#define WM831X_LDO3_ON_VSEL_WIDTH                    5  /* LDO3_ON_VSEL - [4:0] */
-
-/*
- * R16496 (0x4070) - LDO3 SLEEP Control
- */
-#define WM831X_LDO3_SLP_SLOT_MASK               0xE000  /* LDO3_SLP_SLOT - [15:13] */
-#define WM831X_LDO3_SLP_SLOT_SHIFT                  13  /* LDO3_SLP_SLOT - [15:13] */
-#define WM831X_LDO3_SLP_SLOT_WIDTH                   3  /* LDO3_SLP_SLOT - [15:13] */
-#define WM831X_LDO3_SLP_MODE                    0x0100  /* LDO3_SLP_MODE */
-#define WM831X_LDO3_SLP_MODE_MASK               0x0100  /* LDO3_SLP_MODE */
-#define WM831X_LDO3_SLP_MODE_SHIFT                   8  /* LDO3_SLP_MODE */
-#define WM831X_LDO3_SLP_MODE_WIDTH                   1  /* LDO3_SLP_MODE */
-#define WM831X_LDO3_SLP_VSEL_MASK               0x001F  /* LDO3_SLP_VSEL - [4:0] */
-#define WM831X_LDO3_SLP_VSEL_SHIFT                   0  /* LDO3_SLP_VSEL - [4:0] */
-#define WM831X_LDO3_SLP_VSEL_WIDTH                   5  /* LDO3_SLP_VSEL - [4:0] */
-
-/*
- * R16497 (0x4071) - LDO4 Control
- */
-#define WM831X_LDO4_ERR_ACT_MASK                0xC000  /* LDO4_ERR_ACT - [15:14] */
-#define WM831X_LDO4_ERR_ACT_SHIFT                   14  /* LDO4_ERR_ACT - [15:14] */
-#define WM831X_LDO4_ERR_ACT_WIDTH                    2  /* LDO4_ERR_ACT - [15:14] */
-#define WM831X_LDO4_HWC_SRC_MASK                0x1800  /* LDO4_HWC_SRC - [12:11] */
-#define WM831X_LDO4_HWC_SRC_SHIFT                   11  /* LDO4_HWC_SRC - [12:11] */
-#define WM831X_LDO4_HWC_SRC_WIDTH                    2  /* LDO4_HWC_SRC - [12:11] */
-#define WM831X_LDO4_HWC_VSEL                    0x0400  /* LDO4_HWC_VSEL */
-#define WM831X_LDO4_HWC_VSEL_MASK               0x0400  /* LDO4_HWC_VSEL */
-#define WM831X_LDO4_HWC_VSEL_SHIFT                  10  /* LDO4_HWC_VSEL */
-#define WM831X_LDO4_HWC_VSEL_WIDTH                   1  /* LDO4_HWC_VSEL */
-#define WM831X_LDO4_HWC_MODE_MASK               0x0300  /* LDO4_HWC_MODE - [9:8] */
-#define WM831X_LDO4_HWC_MODE_SHIFT                   8  /* LDO4_HWC_MODE - [9:8] */
-#define WM831X_LDO4_HWC_MODE_WIDTH                   2  /* LDO4_HWC_MODE - [9:8] */
-#define WM831X_LDO4_FLT                         0x0080  /* LDO4_FLT */
-#define WM831X_LDO4_FLT_MASK                    0x0080  /* LDO4_FLT */
-#define WM831X_LDO4_FLT_SHIFT                        7  /* LDO4_FLT */
-#define WM831X_LDO4_FLT_WIDTH                        1  /* LDO4_FLT */
-#define WM831X_LDO4_SWI                         0x0040  /* LDO4_SWI */
-#define WM831X_LDO4_SWI_MASK                    0x0040  /* LDO4_SWI */
-#define WM831X_LDO4_SWI_SHIFT                        6  /* LDO4_SWI */
-#define WM831X_LDO4_SWI_WIDTH                        1  /* LDO4_SWI */
-#define WM831X_LDO4_LP_MODE                     0x0001  /* LDO4_LP_MODE */
-#define WM831X_LDO4_LP_MODE_MASK                0x0001  /* LDO4_LP_MODE */
-#define WM831X_LDO4_LP_MODE_SHIFT                    0  /* LDO4_LP_MODE */
-#define WM831X_LDO4_LP_MODE_WIDTH                    1  /* LDO4_LP_MODE */
-
-/*
- * R16498 (0x4072) - LDO4 ON Control
- */
-#define WM831X_LDO4_ON_SLOT_MASK                0xE000  /* LDO4_ON_SLOT - [15:13] */
-#define WM831X_LDO4_ON_SLOT_SHIFT                   13  /* LDO4_ON_SLOT - [15:13] */
-#define WM831X_LDO4_ON_SLOT_WIDTH                    3  /* LDO4_ON_SLOT - [15:13] */
-#define WM831X_LDO4_ON_MODE                     0x0100  /* LDO4_ON_MODE */
-#define WM831X_LDO4_ON_MODE_MASK                0x0100  /* LDO4_ON_MODE */
-#define WM831X_LDO4_ON_MODE_SHIFT                    8  /* LDO4_ON_MODE */
-#define WM831X_LDO4_ON_MODE_WIDTH                    1  /* LDO4_ON_MODE */
-#define WM831X_LDO4_ON_VSEL_MASK                0x001F  /* LDO4_ON_VSEL - [4:0] */
-#define WM831X_LDO4_ON_VSEL_SHIFT                    0  /* LDO4_ON_VSEL - [4:0] */
-#define WM831X_LDO4_ON_VSEL_WIDTH                    5  /* LDO4_ON_VSEL - [4:0] */
-
-/*
- * R16499 (0x4073) - LDO4 SLEEP Control
- */
-#define WM831X_LDO4_SLP_SLOT_MASK               0xE000  /* LDO4_SLP_SLOT - [15:13] */
-#define WM831X_LDO4_SLP_SLOT_SHIFT                  13  /* LDO4_SLP_SLOT - [15:13] */
-#define WM831X_LDO4_SLP_SLOT_WIDTH                   3  /* LDO4_SLP_SLOT - [15:13] */
-#define WM831X_LDO4_SLP_MODE                    0x0100  /* LDO4_SLP_MODE */
-#define WM831X_LDO4_SLP_MODE_MASK               0x0100  /* LDO4_SLP_MODE */
-#define WM831X_LDO4_SLP_MODE_SHIFT                   8  /* LDO4_SLP_MODE */
-#define WM831X_LDO4_SLP_MODE_WIDTH                   1  /* LDO4_SLP_MODE */
-#define WM831X_LDO4_SLP_VSEL_MASK               0x001F  /* LDO4_SLP_VSEL - [4:0] */
-#define WM831X_LDO4_SLP_VSEL_SHIFT                   0  /* LDO4_SLP_VSEL - [4:0] */
-#define WM831X_LDO4_SLP_VSEL_WIDTH                   5  /* LDO4_SLP_VSEL - [4:0] */
-
-/*
- * R16500 (0x4074) - LDO5 Control
- */
-#define WM831X_LDO5_ERR_ACT_MASK                0xC000  /* LDO5_ERR_ACT - [15:14] */
-#define WM831X_LDO5_ERR_ACT_SHIFT                   14  /* LDO5_ERR_ACT - [15:14] */
-#define WM831X_LDO5_ERR_ACT_WIDTH                    2  /* LDO5_ERR_ACT - [15:14] */
-#define WM831X_LDO5_HWC_SRC_MASK                0x1800  /* LDO5_HWC_SRC - [12:11] */
-#define WM831X_LDO5_HWC_SRC_SHIFT                   11  /* LDO5_HWC_SRC - [12:11] */
-#define WM831X_LDO5_HWC_SRC_WIDTH                    2  /* LDO5_HWC_SRC - [12:11] */
-#define WM831X_LDO5_HWC_VSEL                    0x0400  /* LDO5_HWC_VSEL */
-#define WM831X_LDO5_HWC_VSEL_MASK               0x0400  /* LDO5_HWC_VSEL */
-#define WM831X_LDO5_HWC_VSEL_SHIFT                  10  /* LDO5_HWC_VSEL */
-#define WM831X_LDO5_HWC_VSEL_WIDTH                   1  /* LDO5_HWC_VSEL */
-#define WM831X_LDO5_HWC_MODE_MASK               0x0300  /* LDO5_HWC_MODE - [9:8] */
-#define WM831X_LDO5_HWC_MODE_SHIFT                   8  /* LDO5_HWC_MODE - [9:8] */
-#define WM831X_LDO5_HWC_MODE_WIDTH                   2  /* LDO5_HWC_MODE - [9:8] */
-#define WM831X_LDO5_FLT                         0x0080  /* LDO5_FLT */
-#define WM831X_LDO5_FLT_MASK                    0x0080  /* LDO5_FLT */
-#define WM831X_LDO5_FLT_SHIFT                        7  /* LDO5_FLT */
-#define WM831X_LDO5_FLT_WIDTH                        1  /* LDO5_FLT */
-#define WM831X_LDO5_SWI                         0x0040  /* LDO5_SWI */
-#define WM831X_LDO5_SWI_MASK                    0x0040  /* LDO5_SWI */
-#define WM831X_LDO5_SWI_SHIFT                        6  /* LDO5_SWI */
-#define WM831X_LDO5_SWI_WIDTH                        1  /* LDO5_SWI */
-#define WM831X_LDO5_LP_MODE                     0x0001  /* LDO5_LP_MODE */
-#define WM831X_LDO5_LP_MODE_MASK                0x0001  /* LDO5_LP_MODE */
-#define WM831X_LDO5_LP_MODE_SHIFT                    0  /* LDO5_LP_MODE */
-#define WM831X_LDO5_LP_MODE_WIDTH                    1  /* LDO5_LP_MODE */
-
-/*
- * R16501 (0x4075) - LDO5 ON Control
- */
-#define WM831X_LDO5_ON_SLOT_MASK                0xE000  /* LDO5_ON_SLOT - [15:13] */
-#define WM831X_LDO5_ON_SLOT_SHIFT                   13  /* LDO5_ON_SLOT - [15:13] */
-#define WM831X_LDO5_ON_SLOT_WIDTH                    3  /* LDO5_ON_SLOT - [15:13] */
-#define WM831X_LDO5_ON_MODE                     0x0100  /* LDO5_ON_MODE */
-#define WM831X_LDO5_ON_MODE_MASK                0x0100  /* LDO5_ON_MODE */
-#define WM831X_LDO5_ON_MODE_SHIFT                    8  /* LDO5_ON_MODE */
-#define WM831X_LDO5_ON_MODE_WIDTH                    1  /* LDO5_ON_MODE */
-#define WM831X_LDO5_ON_VSEL_MASK                0x001F  /* LDO5_ON_VSEL - [4:0] */
-#define WM831X_LDO5_ON_VSEL_SHIFT                    0  /* LDO5_ON_VSEL - [4:0] */
-#define WM831X_LDO5_ON_VSEL_WIDTH                    5  /* LDO5_ON_VSEL - [4:0] */
-
-/*
- * R16502 (0x4076) - LDO5 SLEEP Control
- */
-#define WM831X_LDO5_SLP_SLOT_MASK               0xE000  /* LDO5_SLP_SLOT - [15:13] */
-#define WM831X_LDO5_SLP_SLOT_SHIFT                  13  /* LDO5_SLP_SLOT - [15:13] */
-#define WM831X_LDO5_SLP_SLOT_WIDTH                   3  /* LDO5_SLP_SLOT - [15:13] */
-#define WM831X_LDO5_SLP_MODE                    0x0100  /* LDO5_SLP_MODE */
-#define WM831X_LDO5_SLP_MODE_MASK               0x0100  /* LDO5_SLP_MODE */
-#define WM831X_LDO5_SLP_MODE_SHIFT                   8  /* LDO5_SLP_MODE */
-#define WM831X_LDO5_SLP_MODE_WIDTH                   1  /* LDO5_SLP_MODE */
-#define WM831X_LDO5_SLP_VSEL_MASK               0x001F  /* LDO5_SLP_VSEL - [4:0] */
-#define WM831X_LDO5_SLP_VSEL_SHIFT                   0  /* LDO5_SLP_VSEL - [4:0] */
-#define WM831X_LDO5_SLP_VSEL_WIDTH                   5  /* LDO5_SLP_VSEL - [4:0] */
-
-/*
- * R16503 (0x4077) - LDO6 Control
- */
-#define WM831X_LDO6_ERR_ACT_MASK                0xC000  /* LDO6_ERR_ACT - [15:14] */
-#define WM831X_LDO6_ERR_ACT_SHIFT                   14  /* LDO6_ERR_ACT - [15:14] */
-#define WM831X_LDO6_ERR_ACT_WIDTH                    2  /* LDO6_ERR_ACT - [15:14] */
-#define WM831X_LDO6_HWC_SRC_MASK                0x1800  /* LDO6_HWC_SRC - [12:11] */
-#define WM831X_LDO6_HWC_SRC_SHIFT                   11  /* LDO6_HWC_SRC - [12:11] */
-#define WM831X_LDO6_HWC_SRC_WIDTH                    2  /* LDO6_HWC_SRC - [12:11] */
-#define WM831X_LDO6_HWC_VSEL                    0x0400  /* LDO6_HWC_VSEL */
-#define WM831X_LDO6_HWC_VSEL_MASK               0x0400  /* LDO6_HWC_VSEL */
-#define WM831X_LDO6_HWC_VSEL_SHIFT                  10  /* LDO6_HWC_VSEL */
-#define WM831X_LDO6_HWC_VSEL_WIDTH                   1  /* LDO6_HWC_VSEL */
-#define WM831X_LDO6_HWC_MODE_MASK               0x0300  /* LDO6_HWC_MODE - [9:8] */
-#define WM831X_LDO6_HWC_MODE_SHIFT                   8  /* LDO6_HWC_MODE - [9:8] */
-#define WM831X_LDO6_HWC_MODE_WIDTH                   2  /* LDO6_HWC_MODE - [9:8] */
-#define WM831X_LDO6_FLT                         0x0080  /* LDO6_FLT */
-#define WM831X_LDO6_FLT_MASK                    0x0080  /* LDO6_FLT */
-#define WM831X_LDO6_FLT_SHIFT                        7  /* LDO6_FLT */
-#define WM831X_LDO6_FLT_WIDTH                        1  /* LDO6_FLT */
-#define WM831X_LDO6_SWI                         0x0040  /* LDO6_SWI */
-#define WM831X_LDO6_SWI_MASK                    0x0040  /* LDO6_SWI */
-#define WM831X_LDO6_SWI_SHIFT                        6  /* LDO6_SWI */
-#define WM831X_LDO6_SWI_WIDTH                        1  /* LDO6_SWI */
-#define WM831X_LDO6_LP_MODE                     0x0001  /* LDO6_LP_MODE */
-#define WM831X_LDO6_LP_MODE_MASK                0x0001  /* LDO6_LP_MODE */
-#define WM831X_LDO6_LP_MODE_SHIFT                    0  /* LDO6_LP_MODE */
-#define WM831X_LDO6_LP_MODE_WIDTH                    1  /* LDO6_LP_MODE */
-
-/*
- * R16504 (0x4078) - LDO6 ON Control
- */
-#define WM831X_LDO6_ON_SLOT_MASK                0xE000  /* LDO6_ON_SLOT - [15:13] */
-#define WM831X_LDO6_ON_SLOT_SHIFT                   13  /* LDO6_ON_SLOT - [15:13] */
-#define WM831X_LDO6_ON_SLOT_WIDTH                    3  /* LDO6_ON_SLOT - [15:13] */
-#define WM831X_LDO6_ON_MODE                     0x0100  /* LDO6_ON_MODE */
-#define WM831X_LDO6_ON_MODE_MASK                0x0100  /* LDO6_ON_MODE */
-#define WM831X_LDO6_ON_MODE_SHIFT                    8  /* LDO6_ON_MODE */
-#define WM831X_LDO6_ON_MODE_WIDTH                    1  /* LDO6_ON_MODE */
-#define WM831X_LDO6_ON_VSEL_MASK                0x001F  /* LDO6_ON_VSEL - [4:0] */
-#define WM831X_LDO6_ON_VSEL_SHIFT                    0  /* LDO6_ON_VSEL - [4:0] */
-#define WM831X_LDO6_ON_VSEL_WIDTH                    5  /* LDO6_ON_VSEL - [4:0] */
-
-/*
- * R16505 (0x4079) - LDO6 SLEEP Control
- */
-#define WM831X_LDO6_SLP_SLOT_MASK               0xE000  /* LDO6_SLP_SLOT - [15:13] */
-#define WM831X_LDO6_SLP_SLOT_SHIFT                  13  /* LDO6_SLP_SLOT - [15:13] */
-#define WM831X_LDO6_SLP_SLOT_WIDTH                   3  /* LDO6_SLP_SLOT - [15:13] */
-#define WM831X_LDO6_SLP_MODE                    0x0100  /* LDO6_SLP_MODE */
-#define WM831X_LDO6_SLP_MODE_MASK               0x0100  /* LDO6_SLP_MODE */
-#define WM831X_LDO6_SLP_MODE_SHIFT                   8  /* LDO6_SLP_MODE */
-#define WM831X_LDO6_SLP_MODE_WIDTH                   1  /* LDO6_SLP_MODE */
-#define WM831X_LDO6_SLP_VSEL_MASK               0x001F  /* LDO6_SLP_VSEL - [4:0] */
-#define WM831X_LDO6_SLP_VSEL_SHIFT                   0  /* LDO6_SLP_VSEL - [4:0] */
-#define WM831X_LDO6_SLP_VSEL_WIDTH                   5  /* LDO6_SLP_VSEL - [4:0] */
-
-/*
- * R16506 (0x407A) - LDO7 Control
- */
-#define WM831X_LDO7_ERR_ACT_MASK                0xC000  /* LDO7_ERR_ACT - [15:14] */
-#define WM831X_LDO7_ERR_ACT_SHIFT                   14  /* LDO7_ERR_ACT - [15:14] */
-#define WM831X_LDO7_ERR_ACT_WIDTH                    2  /* LDO7_ERR_ACT - [15:14] */
-#define WM831X_LDO7_HWC_SRC_MASK                0x1800  /* LDO7_HWC_SRC - [12:11] */
-#define WM831X_LDO7_HWC_SRC_SHIFT                   11  /* LDO7_HWC_SRC - [12:11] */
-#define WM831X_LDO7_HWC_SRC_WIDTH                    2  /* LDO7_HWC_SRC - [12:11] */
-#define WM831X_LDO7_HWC_VSEL                    0x0400  /* LDO7_HWC_VSEL */
-#define WM831X_LDO7_HWC_VSEL_MASK               0x0400  /* LDO7_HWC_VSEL */
-#define WM831X_LDO7_HWC_VSEL_SHIFT                  10  /* LDO7_HWC_VSEL */
-#define WM831X_LDO7_HWC_VSEL_WIDTH                   1  /* LDO7_HWC_VSEL */
-#define WM831X_LDO7_HWC_MODE_MASK               0x0300  /* LDO7_HWC_MODE - [9:8] */
-#define WM831X_LDO7_HWC_MODE_SHIFT                   8  /* LDO7_HWC_MODE - [9:8] */
-#define WM831X_LDO7_HWC_MODE_WIDTH                   2  /* LDO7_HWC_MODE - [9:8] */
-#define WM831X_LDO7_FLT                         0x0080  /* LDO7_FLT */
-#define WM831X_LDO7_FLT_MASK                    0x0080  /* LDO7_FLT */
-#define WM831X_LDO7_FLT_SHIFT                        7  /* LDO7_FLT */
-#define WM831X_LDO7_FLT_WIDTH                        1  /* LDO7_FLT */
-#define WM831X_LDO7_SWI                         0x0040  /* LDO7_SWI */
-#define WM831X_LDO7_SWI_MASK                    0x0040  /* LDO7_SWI */
-#define WM831X_LDO7_SWI_SHIFT                        6  /* LDO7_SWI */
-#define WM831X_LDO7_SWI_WIDTH                        1  /* LDO7_SWI */
-
-/*
- * R16507 (0x407B) - LDO7 ON Control
- */
-#define WM831X_LDO7_ON_SLOT_MASK                0xE000  /* LDO7_ON_SLOT - [15:13] */
-#define WM831X_LDO7_ON_SLOT_SHIFT                   13  /* LDO7_ON_SLOT - [15:13] */
-#define WM831X_LDO7_ON_SLOT_WIDTH                    3  /* LDO7_ON_SLOT - [15:13] */
-#define WM831X_LDO7_ON_MODE                     0x0100  /* LDO7_ON_MODE */
-#define WM831X_LDO7_ON_MODE_MASK                0x0100  /* LDO7_ON_MODE */
-#define WM831X_LDO7_ON_MODE_SHIFT                    8  /* LDO7_ON_MODE */
-#define WM831X_LDO7_ON_MODE_WIDTH                    1  /* LDO7_ON_MODE */
-#define WM831X_LDO7_ON_VSEL_MASK                0x001F  /* LDO7_ON_VSEL - [4:0] */
-#define WM831X_LDO7_ON_VSEL_SHIFT                    0  /* LDO7_ON_VSEL - [4:0] */
-#define WM831X_LDO7_ON_VSEL_WIDTH                    5  /* LDO7_ON_VSEL - [4:0] */
-
-/*
- * R16508 (0x407C) - LDO7 SLEEP Control
- */
-#define WM831X_LDO7_SLP_SLOT_MASK               0xE000  /* LDO7_SLP_SLOT - [15:13] */
-#define WM831X_LDO7_SLP_SLOT_SHIFT                  13  /* LDO7_SLP_SLOT - [15:13] */
-#define WM831X_LDO7_SLP_SLOT_WIDTH                   3  /* LDO7_SLP_SLOT - [15:13] */
-#define WM831X_LDO7_SLP_MODE                    0x0100  /* LDO7_SLP_MODE */
-#define WM831X_LDO7_SLP_MODE_MASK               0x0100  /* LDO7_SLP_MODE */
-#define WM831X_LDO7_SLP_MODE_SHIFT                   8  /* LDO7_SLP_MODE */
-#define WM831X_LDO7_SLP_MODE_WIDTH                   1  /* LDO7_SLP_MODE */
-#define WM831X_LDO7_SLP_VSEL_MASK               0x001F  /* LDO7_SLP_VSEL - [4:0] */
-#define WM831X_LDO7_SLP_VSEL_SHIFT                   0  /* LDO7_SLP_VSEL - [4:0] */
-#define WM831X_LDO7_SLP_VSEL_WIDTH                   5  /* LDO7_SLP_VSEL - [4:0] */
-
-/*
- * R16509 (0x407D) - LDO8 Control
- */
-#define WM831X_LDO8_ERR_ACT_MASK                0xC000  /* LDO8_ERR_ACT - [15:14] */
-#define WM831X_LDO8_ERR_ACT_SHIFT                   14  /* LDO8_ERR_ACT - [15:14] */
-#define WM831X_LDO8_ERR_ACT_WIDTH                    2  /* LDO8_ERR_ACT - [15:14] */
-#define WM831X_LDO8_HWC_SRC_MASK                0x1800  /* LDO8_HWC_SRC - [12:11] */
-#define WM831X_LDO8_HWC_SRC_SHIFT                   11  /* LDO8_HWC_SRC - [12:11] */
-#define WM831X_LDO8_HWC_SRC_WIDTH                    2  /* LDO8_HWC_SRC - [12:11] */
-#define WM831X_LDO8_HWC_VSEL                    0x0400  /* LDO8_HWC_VSEL */
-#define WM831X_LDO8_HWC_VSEL_MASK               0x0400  /* LDO8_HWC_VSEL */
-#define WM831X_LDO8_HWC_VSEL_SHIFT                  10  /* LDO8_HWC_VSEL */
-#define WM831X_LDO8_HWC_VSEL_WIDTH                   1  /* LDO8_HWC_VSEL */
-#define WM831X_LDO8_HWC_MODE_MASK               0x0300  /* LDO8_HWC_MODE - [9:8] */
-#define WM831X_LDO8_HWC_MODE_SHIFT                   8  /* LDO8_HWC_MODE - [9:8] */
-#define WM831X_LDO8_HWC_MODE_WIDTH                   2  /* LDO8_HWC_MODE - [9:8] */
-#define WM831X_LDO8_FLT                         0x0080  /* LDO8_FLT */
-#define WM831X_LDO8_FLT_MASK                    0x0080  /* LDO8_FLT */
-#define WM831X_LDO8_FLT_SHIFT                        7  /* LDO8_FLT */
-#define WM831X_LDO8_FLT_WIDTH                        1  /* LDO8_FLT */
-#define WM831X_LDO8_SWI                         0x0040  /* LDO8_SWI */
-#define WM831X_LDO8_SWI_MASK                    0x0040  /* LDO8_SWI */
-#define WM831X_LDO8_SWI_SHIFT                        6  /* LDO8_SWI */
-#define WM831X_LDO8_SWI_WIDTH                        1  /* LDO8_SWI */
-
-/*
- * R16510 (0x407E) - LDO8 ON Control
- */
-#define WM831X_LDO8_ON_SLOT_MASK                0xE000  /* LDO8_ON_SLOT - [15:13] */
-#define WM831X_LDO8_ON_SLOT_SHIFT                   13  /* LDO8_ON_SLOT - [15:13] */
-#define WM831X_LDO8_ON_SLOT_WIDTH                    3  /* LDO8_ON_SLOT - [15:13] */
-#define WM831X_LDO8_ON_MODE                     0x0100  /* LDO8_ON_MODE */
-#define WM831X_LDO8_ON_MODE_MASK                0x0100  /* LDO8_ON_MODE */
-#define WM831X_LDO8_ON_MODE_SHIFT                    8  /* LDO8_ON_MODE */
-#define WM831X_LDO8_ON_MODE_WIDTH                    1  /* LDO8_ON_MODE */
-#define WM831X_LDO8_ON_VSEL_MASK                0x001F  /* LDO8_ON_VSEL - [4:0] */
-#define WM831X_LDO8_ON_VSEL_SHIFT                    0  /* LDO8_ON_VSEL - [4:0] */
-#define WM831X_LDO8_ON_VSEL_WIDTH                    5  /* LDO8_ON_VSEL - [4:0] */
-
-/*
- * R16511 (0x407F) - LDO8 SLEEP Control
- */
-#define WM831X_LDO8_SLP_SLOT_MASK               0xE000  /* LDO8_SLP_SLOT - [15:13] */
-#define WM831X_LDO8_SLP_SLOT_SHIFT                  13  /* LDO8_SLP_SLOT - [15:13] */
-#define WM831X_LDO8_SLP_SLOT_WIDTH                   3  /* LDO8_SLP_SLOT - [15:13] */
-#define WM831X_LDO8_SLP_MODE                    0x0100  /* LDO8_SLP_MODE */
-#define WM831X_LDO8_SLP_MODE_MASK               0x0100  /* LDO8_SLP_MODE */
-#define WM831X_LDO8_SLP_MODE_SHIFT                   8  /* LDO8_SLP_MODE */
-#define WM831X_LDO8_SLP_MODE_WIDTH                   1  /* LDO8_SLP_MODE */
-#define WM831X_LDO8_SLP_VSEL_MASK               0x001F  /* LDO8_SLP_VSEL - [4:0] */
-#define WM831X_LDO8_SLP_VSEL_SHIFT                   0  /* LDO8_SLP_VSEL - [4:0] */
-#define WM831X_LDO8_SLP_VSEL_WIDTH                   5  /* LDO8_SLP_VSEL - [4:0] */
-
-/*
- * R16512 (0x4080) - LDO9 Control
- */
-#define WM831X_LDO9_ERR_ACT_MASK                0xC000  /* LDO9_ERR_ACT - [15:14] */
-#define WM831X_LDO9_ERR_ACT_SHIFT                   14  /* LDO9_ERR_ACT - [15:14] */
-#define WM831X_LDO9_ERR_ACT_WIDTH                    2  /* LDO9_ERR_ACT - [15:14] */
-#define WM831X_LDO9_HWC_SRC_MASK                0x1800  /* LDO9_HWC_SRC - [12:11] */
-#define WM831X_LDO9_HWC_SRC_SHIFT                   11  /* LDO9_HWC_SRC - [12:11] */
-#define WM831X_LDO9_HWC_SRC_WIDTH                    2  /* LDO9_HWC_SRC - [12:11] */
-#define WM831X_LDO9_HWC_VSEL                    0x0400  /* LDO9_HWC_VSEL */
-#define WM831X_LDO9_HWC_VSEL_MASK               0x0400  /* LDO9_HWC_VSEL */
-#define WM831X_LDO9_HWC_VSEL_SHIFT                  10  /* LDO9_HWC_VSEL */
-#define WM831X_LDO9_HWC_VSEL_WIDTH                   1  /* LDO9_HWC_VSEL */
-#define WM831X_LDO9_HWC_MODE_MASK               0x0300  /* LDO9_HWC_MODE - [9:8] */
-#define WM831X_LDO9_HWC_MODE_SHIFT                   8  /* LDO9_HWC_MODE - [9:8] */
-#define WM831X_LDO9_HWC_MODE_WIDTH                   2  /* LDO9_HWC_MODE - [9:8] */
-#define WM831X_LDO9_FLT                         0x0080  /* LDO9_FLT */
-#define WM831X_LDO9_FLT_MASK                    0x0080  /* LDO9_FLT */
-#define WM831X_LDO9_FLT_SHIFT                        7  /* LDO9_FLT */
-#define WM831X_LDO9_FLT_WIDTH                        1  /* LDO9_FLT */
-#define WM831X_LDO9_SWI                         0x0040  /* LDO9_SWI */
-#define WM831X_LDO9_SWI_MASK                    0x0040  /* LDO9_SWI */
-#define WM831X_LDO9_SWI_SHIFT                        6  /* LDO9_SWI */
-#define WM831X_LDO9_SWI_WIDTH                        1  /* LDO9_SWI */
-
-/*
- * R16513 (0x4081) - LDO9 ON Control
- */
-#define WM831X_LDO9_ON_SLOT_MASK                0xE000  /* LDO9_ON_SLOT - [15:13] */
-#define WM831X_LDO9_ON_SLOT_SHIFT                   13  /* LDO9_ON_SLOT - [15:13] */
-#define WM831X_LDO9_ON_SLOT_WIDTH                    3  /* LDO9_ON_SLOT - [15:13] */
-#define WM831X_LDO9_ON_MODE                     0x0100  /* LDO9_ON_MODE */
-#define WM831X_LDO9_ON_MODE_MASK                0x0100  /* LDO9_ON_MODE */
-#define WM831X_LDO9_ON_MODE_SHIFT                    8  /* LDO9_ON_MODE */
-#define WM831X_LDO9_ON_MODE_WIDTH                    1  /* LDO9_ON_MODE */
-#define WM831X_LDO9_ON_VSEL_MASK                0x001F  /* LDO9_ON_VSEL - [4:0] */
-#define WM831X_LDO9_ON_VSEL_SHIFT                    0  /* LDO9_ON_VSEL - [4:0] */
-#define WM831X_LDO9_ON_VSEL_WIDTH                    5  /* LDO9_ON_VSEL - [4:0] */
-
-/*
- * R16514 (0x4082) - LDO9 SLEEP Control
- */
-#define WM831X_LDO9_SLP_SLOT_MASK               0xE000  /* LDO9_SLP_SLOT - [15:13] */
-#define WM831X_LDO9_SLP_SLOT_SHIFT                  13  /* LDO9_SLP_SLOT - [15:13] */
-#define WM831X_LDO9_SLP_SLOT_WIDTH                   3  /* LDO9_SLP_SLOT - [15:13] */
-#define WM831X_LDO9_SLP_MODE                    0x0100  /* LDO9_SLP_MODE */
-#define WM831X_LDO9_SLP_MODE_MASK               0x0100  /* LDO9_SLP_MODE */
-#define WM831X_LDO9_SLP_MODE_SHIFT                   8  /* LDO9_SLP_MODE */
-#define WM831X_LDO9_SLP_MODE_WIDTH                   1  /* LDO9_SLP_MODE */
-#define WM831X_LDO9_SLP_VSEL_MASK               0x001F  /* LDO9_SLP_VSEL - [4:0] */
-#define WM831X_LDO9_SLP_VSEL_SHIFT                   0  /* LDO9_SLP_VSEL - [4:0] */
-#define WM831X_LDO9_SLP_VSEL_WIDTH                   5  /* LDO9_SLP_VSEL - [4:0] */
-
-/*
- * R16515 (0x4083) - LDO10 Control
- */
-#define WM831X_LDO10_ERR_ACT_MASK               0xC000  /* LDO10_ERR_ACT - [15:14] */
-#define WM831X_LDO10_ERR_ACT_SHIFT                  14  /* LDO10_ERR_ACT - [15:14] */
-#define WM831X_LDO10_ERR_ACT_WIDTH                   2  /* LDO10_ERR_ACT - [15:14] */
-#define WM831X_LDO10_HWC_SRC_MASK               0x1800  /* LDO10_HWC_SRC - [12:11] */
-#define WM831X_LDO10_HWC_SRC_SHIFT                  11  /* LDO10_HWC_SRC - [12:11] */
-#define WM831X_LDO10_HWC_SRC_WIDTH                   2  /* LDO10_HWC_SRC - [12:11] */
-#define WM831X_LDO10_HWC_VSEL                   0x0400  /* LDO10_HWC_VSEL */
-#define WM831X_LDO10_HWC_VSEL_MASK              0x0400  /* LDO10_HWC_VSEL */
-#define WM831X_LDO10_HWC_VSEL_SHIFT                 10  /* LDO10_HWC_VSEL */
-#define WM831X_LDO10_HWC_VSEL_WIDTH                  1  /* LDO10_HWC_VSEL */
-#define WM831X_LDO10_HWC_MODE_MASK              0x0300  /* LDO10_HWC_MODE - [9:8] */
-#define WM831X_LDO10_HWC_MODE_SHIFT                  8  /* LDO10_HWC_MODE - [9:8] */
-#define WM831X_LDO10_HWC_MODE_WIDTH                  2  /* LDO10_HWC_MODE - [9:8] */
-#define WM831X_LDO10_FLT                        0x0080  /* LDO10_FLT */
-#define WM831X_LDO10_FLT_MASK                   0x0080  /* LDO10_FLT */
-#define WM831X_LDO10_FLT_SHIFT                       7  /* LDO10_FLT */
-#define WM831X_LDO10_FLT_WIDTH                       1  /* LDO10_FLT */
-#define WM831X_LDO10_SWI                        0x0040  /* LDO10_SWI */
-#define WM831X_LDO10_SWI_MASK                   0x0040  /* LDO10_SWI */
-#define WM831X_LDO10_SWI_SHIFT                       6  /* LDO10_SWI */
-#define WM831X_LDO10_SWI_WIDTH                       1  /* LDO10_SWI */
-
-/*
- * R16516 (0x4084) - LDO10 ON Control
- */
-#define WM831X_LDO10_ON_SLOT_MASK               0xE000  /* LDO10_ON_SLOT - [15:13] */
-#define WM831X_LDO10_ON_SLOT_SHIFT                  13  /* LDO10_ON_SLOT - [15:13] */
-#define WM831X_LDO10_ON_SLOT_WIDTH                   3  /* LDO10_ON_SLOT - [15:13] */
-#define WM831X_LDO10_ON_MODE                    0x0100  /* LDO10_ON_MODE */
-#define WM831X_LDO10_ON_MODE_MASK               0x0100  /* LDO10_ON_MODE */
-#define WM831X_LDO10_ON_MODE_SHIFT                   8  /* LDO10_ON_MODE */
-#define WM831X_LDO10_ON_MODE_WIDTH                   1  /* LDO10_ON_MODE */
-#define WM831X_LDO10_ON_VSEL_MASK               0x001F  /* LDO10_ON_VSEL - [4:0] */
-#define WM831X_LDO10_ON_VSEL_SHIFT                   0  /* LDO10_ON_VSEL - [4:0] */
-#define WM831X_LDO10_ON_VSEL_WIDTH                   5  /* LDO10_ON_VSEL - [4:0] */
-
-/*
- * R16517 (0x4085) - LDO10 SLEEP Control
- */
-#define WM831X_LDO10_SLP_SLOT_MASK              0xE000  /* LDO10_SLP_SLOT - [15:13] */
-#define WM831X_LDO10_SLP_SLOT_SHIFT                 13  /* LDO10_SLP_SLOT - [15:13] */
-#define WM831X_LDO10_SLP_SLOT_WIDTH                  3  /* LDO10_SLP_SLOT - [15:13] */
-#define WM831X_LDO10_SLP_MODE                   0x0100  /* LDO10_SLP_MODE */
-#define WM831X_LDO10_SLP_MODE_MASK              0x0100  /* LDO10_SLP_MODE */
-#define WM831X_LDO10_SLP_MODE_SHIFT                  8  /* LDO10_SLP_MODE */
-#define WM831X_LDO10_SLP_MODE_WIDTH                  1  /* LDO10_SLP_MODE */
-#define WM831X_LDO10_SLP_VSEL_MASK              0x001F  /* LDO10_SLP_VSEL - [4:0] */
-#define WM831X_LDO10_SLP_VSEL_SHIFT                  0  /* LDO10_SLP_VSEL - [4:0] */
-#define WM831X_LDO10_SLP_VSEL_WIDTH                  5  /* LDO10_SLP_VSEL - [4:0] */
-
-/*
- * R16519 (0x4087) - LDO11 ON Control
- */
-#define WM831X_LDO11_ON_SLOT_MASK               0xE000  /* LDO11_ON_SLOT - [15:13] */
-#define WM831X_LDO11_ON_SLOT_SHIFT                  13  /* LDO11_ON_SLOT - [15:13] */
-#define WM831X_LDO11_ON_SLOT_WIDTH                   3  /* LDO11_ON_SLOT - [15:13] */
-#define WM831X_LDO11_OFFENA                     0x1000  /* LDO11_OFFENA */
-#define WM831X_LDO11_OFFENA_MASK                0x1000  /* LDO11_OFFENA */
-#define WM831X_LDO11_OFFENA_SHIFT                   12  /* LDO11_OFFENA */
-#define WM831X_LDO11_OFFENA_WIDTH                    1  /* LDO11_OFFENA */
-#define WM831X_LDO11_VSEL_SRC                   0x0080  /* LDO11_VSEL_SRC */
-#define WM831X_LDO11_VSEL_SRC_MASK              0x0080  /* LDO11_VSEL_SRC */
-#define WM831X_LDO11_VSEL_SRC_SHIFT                  7  /* LDO11_VSEL_SRC */
-#define WM831X_LDO11_VSEL_SRC_WIDTH                  1  /* LDO11_VSEL_SRC */
-#define WM831X_LDO11_ON_VSEL_MASK               0x000F  /* LDO11_ON_VSEL - [3:0] */
-#define WM831X_LDO11_ON_VSEL_SHIFT                   0  /* LDO11_ON_VSEL - [3:0] */
-#define WM831X_LDO11_ON_VSEL_WIDTH                   4  /* LDO11_ON_VSEL - [3:0] */
-
-/*
- * R16520 (0x4088) - LDO11 SLEEP Control
- */
-#define WM831X_LDO11_SLP_SLOT_MASK              0xE000  /* LDO11_SLP_SLOT - [15:13] */
-#define WM831X_LDO11_SLP_SLOT_SHIFT                 13  /* LDO11_SLP_SLOT - [15:13] */
-#define WM831X_LDO11_SLP_SLOT_WIDTH                  3  /* LDO11_SLP_SLOT - [15:13] */
-#define WM831X_LDO11_SLP_VSEL_MASK              0x000F  /* LDO11_SLP_VSEL - [3:0] */
-#define WM831X_LDO11_SLP_VSEL_SHIFT                  0  /* LDO11_SLP_VSEL - [3:0] */
-#define WM831X_LDO11_SLP_VSEL_WIDTH                  4  /* LDO11_SLP_VSEL - [3:0] */
-
-/*
- * R16526 (0x408E) - Power Good Source 1
- */
-#define WM831X_DC4_OK                           0x0008  /* DC4_OK */
-#define WM831X_DC4_OK_MASK                      0x0008  /* DC4_OK */
-#define WM831X_DC4_OK_SHIFT                          3  /* DC4_OK */
-#define WM831X_DC4_OK_WIDTH                          1  /* DC4_OK */
-#define WM831X_DC3_OK                           0x0004  /* DC3_OK */
-#define WM831X_DC3_OK_MASK                      0x0004  /* DC3_OK */
-#define WM831X_DC3_OK_SHIFT                          2  /* DC3_OK */
-#define WM831X_DC3_OK_WIDTH                          1  /* DC3_OK */
-#define WM831X_DC2_OK                           0x0002  /* DC2_OK */
-#define WM831X_DC2_OK_MASK                      0x0002  /* DC2_OK */
-#define WM831X_DC2_OK_SHIFT                          1  /* DC2_OK */
-#define WM831X_DC2_OK_WIDTH                          1  /* DC2_OK */
-#define WM831X_DC1_OK                           0x0001  /* DC1_OK */
-#define WM831X_DC1_OK_MASK                      0x0001  /* DC1_OK */
-#define WM831X_DC1_OK_SHIFT                          0  /* DC1_OK */
-#define WM831X_DC1_OK_WIDTH                          1  /* DC1_OK */
-
-/*
- * R16527 (0x408F) - Power Good Source 2
- */
-#define WM831X_LDO10_OK                         0x0200  /* LDO10_OK */
-#define WM831X_LDO10_OK_MASK                    0x0200  /* LDO10_OK */
-#define WM831X_LDO10_OK_SHIFT                        9  /* LDO10_OK */
-#define WM831X_LDO10_OK_WIDTH                        1  /* LDO10_OK */
-#define WM831X_LDO9_OK                          0x0100  /* LDO9_OK */
-#define WM831X_LDO9_OK_MASK                     0x0100  /* LDO9_OK */
-#define WM831X_LDO9_OK_SHIFT                         8  /* LDO9_OK */
-#define WM831X_LDO9_OK_WIDTH                         1  /* LDO9_OK */
-#define WM831X_LDO8_OK                          0x0080  /* LDO8_OK */
-#define WM831X_LDO8_OK_MASK                     0x0080  /* LDO8_OK */
-#define WM831X_LDO8_OK_SHIFT                         7  /* LDO8_OK */
-#define WM831X_LDO8_OK_WIDTH                         1  /* LDO8_OK */
-#define WM831X_LDO7_OK                          0x0040  /* LDO7_OK */
-#define WM831X_LDO7_OK_MASK                     0x0040  /* LDO7_OK */
-#define WM831X_LDO7_OK_SHIFT                         6  /* LDO7_OK */
-#define WM831X_LDO7_OK_WIDTH                         1  /* LDO7_OK */
-#define WM831X_LDO6_OK                          0x0020  /* LDO6_OK */
-#define WM831X_LDO6_OK_MASK                     0x0020  /* LDO6_OK */
-#define WM831X_LDO6_OK_SHIFT                         5  /* LDO6_OK */
-#define WM831X_LDO6_OK_WIDTH                         1  /* LDO6_OK */
-#define WM831X_LDO5_OK                          0x0010  /* LDO5_OK */
-#define WM831X_LDO5_OK_MASK                     0x0010  /* LDO5_OK */
-#define WM831X_LDO5_OK_SHIFT                         4  /* LDO5_OK */
-#define WM831X_LDO5_OK_WIDTH                         1  /* LDO5_OK */
-#define WM831X_LDO4_OK                          0x0008  /* LDO4_OK */
-#define WM831X_LDO4_OK_MASK                     0x0008  /* LDO4_OK */
-#define WM831X_LDO4_OK_SHIFT                         3  /* LDO4_OK */
-#define WM831X_LDO4_OK_WIDTH                         1  /* LDO4_OK */
-#define WM831X_LDO3_OK                          0x0004  /* LDO3_OK */
-#define WM831X_LDO3_OK_MASK                     0x0004  /* LDO3_OK */
-#define WM831X_LDO3_OK_SHIFT                         2  /* LDO3_OK */
-#define WM831X_LDO3_OK_WIDTH                         1  /* LDO3_OK */
-#define WM831X_LDO2_OK                          0x0002  /* LDO2_OK */
-#define WM831X_LDO2_OK_MASK                     0x0002  /* LDO2_OK */
-#define WM831X_LDO2_OK_SHIFT                         1  /* LDO2_OK */
-#define WM831X_LDO2_OK_WIDTH                         1  /* LDO2_OK */
-#define WM831X_LDO1_OK                          0x0001  /* LDO1_OK */
-#define WM831X_LDO1_OK_MASK                     0x0001  /* LDO1_OK */
-#define WM831X_LDO1_OK_SHIFT                         0  /* LDO1_OK */
-#define WM831X_LDO1_OK_WIDTH                         1  /* LDO1_OK */
-
-#define WM831X_ISINK_MAX_ISEL 55
-extern int wm831x_isinkv_values[WM831X_ISINK_MAX_ISEL + 1];
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/mfd/wm831x/status.h b/ANDROID_3.4.5/include/linux/mfd/wm831x/status.h
deleted file mode 100644
index 6bc090d0..00000000
--- a/ANDROID_3.4.5/include/linux/mfd/wm831x/status.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * include/linux/mfd/wm831x/status.h -- Status LEDs for WM831x
- *
- * Copyright 2009 Wolfson Microelectronics PLC.
- *
- * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- */
-
-#ifndef __MFD_WM831X_STATUS_H__
-#define __MFD_WM831X_STATUS_H__
-
-#define WM831X_LED_SRC_MASK                    0xC000  /* LED_SRC - [15:14] */
-#define WM831X_LED_SRC_SHIFT                       14  /* LED_SRC - [15:14] */
-#define WM831X_LED_SRC_WIDTH                        2  /* LED_SRC - [15:14] */
-#define WM831X_LED_MODE_MASK                   0x0300  /* LED_MODE - [9:8] */
-#define WM831X_LED_MODE_SHIFT                       8  /* LED_MODE - [9:8] */
-#define WM831X_LED_MODE_WIDTH                       2  /* LED_MODE - [9:8] */
-#define WM831X_LED_SEQ_LEN_MASK                0x0030  /* LED_SEQ_LEN - [5:4] */
-#define WM831X_LED_SEQ_LEN_SHIFT                    4  /* LED_SEQ_LEN - [5:4] */
-#define WM831X_LED_SEQ_LEN_WIDTH                    2  /* LED_SEQ_LEN - [5:4] */
-#define WM831X_LED_DUR_MASK                    0x000C  /* LED_DUR - [3:2] */
-#define WM831X_LED_DUR_SHIFT                        2  /* LED_DUR - [3:2] */
-#define WM831X_LED_DUR_WIDTH                        2  /* LED_DUR - [3:2] */
-#define WM831X_LED_DUTY_CYC_MASK               0x0003  /* LED_DUTY_CYC - [1:0] */
-#define WM831X_LED_DUTY_CYC_SHIFT                   0  /* LED_DUTY_CYC - [1:0] */
-#define WM831X_LED_DUTY_CYC_WIDTH                   2  /* LED_DUTY_CYC - [1:0] */
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/mfd/wm831x/watchdog.h b/ANDROID_3.4.5/include/linux/mfd/wm831x/watchdog.h
deleted file mode 100644
index 97a99b52..00000000
--- a/ANDROID_3.4.5/include/linux/mfd/wm831x/watchdog.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- * include/linux/mfd/wm831x/watchdog.h -- Watchdog for WM831x
- *
- * Copyright 2009 Wolfson Microelectronics PLC.
- *
- * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- */
-
-#ifndef __MFD_WM831X_WATCHDOG_H__
-#define __MFD_WM831X_WATCHDOG_H__
-
-
-/*
- * R16388 (0x4004) - Watchdog
- */
-#define WM831X_WDOG_ENA                         0x8000  /* WDOG_ENA */
-#define WM831X_WDOG_ENA_MASK                    0x8000  /* WDOG_ENA */
-#define WM831X_WDOG_ENA_SHIFT                       15  /* WDOG_ENA */
-#define WM831X_WDOG_ENA_WIDTH                        1  /* WDOG_ENA */
-#define WM831X_WDOG_DEBUG                       0x4000  /* WDOG_DEBUG */
-#define WM831X_WDOG_DEBUG_MASK                  0x4000  /* WDOG_DEBUG */
-#define WM831X_WDOG_DEBUG_SHIFT                     14  /* WDOG_DEBUG */
-#define WM831X_WDOG_DEBUG_WIDTH                      1  /* WDOG_DEBUG */
-#define WM831X_WDOG_RST_SRC                     0x2000  /* WDOG_RST_SRC */
-#define WM831X_WDOG_RST_SRC_MASK                0x2000  /* WDOG_RST_SRC */
-#define WM831X_WDOG_RST_SRC_SHIFT                   13  /* WDOG_RST_SRC */
-#define WM831X_WDOG_RST_SRC_WIDTH                    1  /* WDOG_RST_SRC */
-#define WM831X_WDOG_SLPENA                      0x1000  /* WDOG_SLPENA */
-#define WM831X_WDOG_SLPENA_MASK                 0x1000  /* WDOG_SLPENA */
-#define WM831X_WDOG_SLPENA_SHIFT                    12  /* WDOG_SLPENA */
-#define WM831X_WDOG_SLPENA_WIDTH                     1  /* WDOG_SLPENA */
-#define WM831X_WDOG_RESET                       0x0800  /* WDOG_RESET */
-#define WM831X_WDOG_RESET_MASK                  0x0800  /* WDOG_RESET */
-#define WM831X_WDOG_RESET_SHIFT                     11  /* WDOG_RESET */
-#define WM831X_WDOG_RESET_WIDTH                      1  /* WDOG_RESET */
-#define WM831X_WDOG_SECACT_MASK                 0x0300  /* WDOG_SECACT - [9:8] */
-#define WM831X_WDOG_SECACT_SHIFT                     8  /* WDOG_SECACT - [9:8] */
-#define WM831X_WDOG_SECACT_WIDTH                     2  /* WDOG_SECACT - [9:8] */
-#define WM831X_WDOG_PRIMACT_MASK                0x0030  /* WDOG_PRIMACT - [5:4] */
-#define WM831X_WDOG_PRIMACT_SHIFT                    4  /* WDOG_PRIMACT - [5:4] */
-#define WM831X_WDOG_PRIMACT_WIDTH                    2  /* WDOG_PRIMACT - [5:4] */
-#define WM831X_WDOG_TO_MASK                     0x0007  /* WDOG_TO - [2:0] */
-#define WM831X_WDOG_TO_SHIFT                         0  /* WDOG_TO - [2:0] */
-#define WM831X_WDOG_TO_WIDTH                         3  /* WDOG_TO - [2:0] */
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/mfd/wm8350/audio.h b/ANDROID_3.4.5/include/linux/mfd/wm8350/audio.h
deleted file mode 100644
index bd581c6f..00000000
--- a/ANDROID_3.4.5/include/linux/mfd/wm8350/audio.h
+++ /dev/null
@@ -1,628 +0,0 @@
-/*
- * audio.h  --  Audio Driver for Wolfson WM8350 PMIC
- *
- * Copyright 2007, 2008 Wolfson Microelectronics PLC
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- */
-
-#ifndef __LINUX_MFD_WM8350_AUDIO_H_
-#define __LINUX_MFD_WM8350_AUDIO_H_
-
-#include <linux/platform_device.h>
-
-#define WM8350_CLOCK_CONTROL_1                  0x28
-#define WM8350_CLOCK_CONTROL_2                  0x29
-#define WM8350_FLL_CONTROL_1                    0x2A
-#define WM8350_FLL_CONTROL_2                    0x2B
-#define WM8350_FLL_CONTROL_3                    0x2C
-#define WM8350_FLL_CONTROL_4                    0x2D
-#define WM8350_DAC_CONTROL                      0x30
-#define WM8350_DAC_DIGITAL_VOLUME_L             0x32
-#define WM8350_DAC_DIGITAL_VOLUME_R             0x33
-#define WM8350_DAC_LR_RATE                      0x35
-#define WM8350_DAC_CLOCK_CONTROL                0x36
-#define WM8350_DAC_MUTE                         0x3A
-#define WM8350_DAC_MUTE_VOLUME                  0x3B
-#define WM8350_DAC_SIDE                         0x3C
-#define WM8350_ADC_CONTROL                      0x40
-#define WM8350_ADC_DIGITAL_VOLUME_L             0x42
-#define WM8350_ADC_DIGITAL_VOLUME_R             0x43
-#define WM8350_ADC_DIVIDER                      0x44
-#define WM8350_ADC_LR_RATE                      0x46
-#define WM8350_INPUT_CONTROL                    0x48
-#define WM8350_IN3_INPUT_CONTROL                0x49
-#define WM8350_MIC_BIAS_CONTROL                 0x4A
-#define WM8350_OUTPUT_CONTROL                   0x4C
-#define WM8350_JACK_DETECT                      0x4D
-#define WM8350_ANTI_POP_CONTROL                 0x4E
-#define WM8350_LEFT_INPUT_VOLUME                0x50
-#define WM8350_RIGHT_INPUT_VOLUME               0x51
-#define WM8350_LEFT_MIXER_CONTROL               0x58
-#define WM8350_RIGHT_MIXER_CONTROL              0x59
-#define WM8350_OUT3_MIXER_CONTROL               0x5C
-#define WM8350_OUT4_MIXER_CONTROL               0x5D
-#define WM8350_OUTPUT_LEFT_MIXER_VOLUME         0x60
-#define WM8350_OUTPUT_RIGHT_MIXER_VOLUME        0x61
-#define WM8350_INPUT_MIXER_VOLUME_L             0x62
-#define WM8350_INPUT_MIXER_VOLUME_R             0x63
-#define WM8350_INPUT_MIXER_VOLUME               0x64
-#define WM8350_LOUT1_VOLUME                     0x68
-#define WM8350_ROUT1_VOLUME                     0x69
-#define WM8350_LOUT2_VOLUME                     0x6A
-#define WM8350_ROUT2_VOLUME                     0x6B
-#define WM8350_BEEP_VOLUME                      0x6F
-#define WM8350_AI_FORMATING                     0x70
-#define WM8350_ADC_DAC_COMP                     0x71
-#define WM8350_AI_ADC_CONTROL                   0x72
-#define WM8350_AI_DAC_CONTROL                   0x73
-#define WM8350_AIF_TEST                         0x74
-#define WM8350_JACK_PIN_STATUS                  0xE7
-
-/* Bit values for R08 (0x08) */
-#define WM8350_CODEC_ISEL_1_5                   0	/* x1.5 */
-#define WM8350_CODEC_ISEL_1_0                   1	/* x1.0 */
-#define WM8350_CODEC_ISEL_0_75                  2	/* x0.75 */
-#define WM8350_CODEC_ISEL_0_5                   3	/* x0.5 */
-
-#define WM8350_VMID_OFF                         0
-#define WM8350_VMID_300K                        1
-#define WM8350_VMID_50K                         2
-#define WM8350_VMID_5K                          3
-
-/*
- * R40 (0x28) - Clock Control 1
- */
-#define WM8350_TOCLK_RATE                       0x4000
-#define WM8350_MCLK_SEL                         0x0800
-#define WM8350_MCLK_DIV_MASK                    0x0100
-#define WM8350_BCLK_DIV_MASK                    0x00F0
-#define WM8350_OPCLK_DIV_MASK                   0x0007
-
-/*
- * R41 (0x29) - Clock Control 2
- */
-#define WM8350_LRC_ADC_SEL                      0x8000
-#define WM8350_MCLK_DIR                         0x0001
-
-/*
- * R42 (0x2A) - FLL Control 1
- */
-#define WM8350_FLL_DITHER_WIDTH_MASK            0x3000
-#define WM8350_FLL_DITHER_HP                    0x0800
-#define WM8350_FLL_OUTDIV_MASK                  0x0700
-#define WM8350_FLL_RSP_RATE_MASK                0x00F0
-#define WM8350_FLL_RATE_MASK                    0x0007
-
-/*
- * R43 (0x2B) - FLL Control 2
- */
-#define WM8350_FLL_RATIO_MASK                   0xF800
-#define WM8350_FLL_N_MASK                       0x03FF
-
-/*
- * R44 (0x2C) - FLL Control 3
- */
-#define WM8350_FLL_K_MASK                       0xFFFF
-
-/*
- * R45 (0x2D) - FLL Control 4
- */
-#define WM8350_FLL_FRAC                         0x0020
-#define WM8350_FLL_SLOW_LOCK_REF                0x0010
-#define WM8350_FLL_CLK_SRC_MASK                 0x0003
-
-/*
- * R48 (0x30) - DAC Control
- */
-#define WM8350_DAC_MONO                         0x2000
-#define WM8350_AIF_LRCLKRATE                    0x1000
-#define WM8350_DEEMP_MASK                       0x0030
-#define WM8350_DACL_DATINV                      0x0002
-#define WM8350_DACR_DATINV                      0x0001
-
-/*
- * R50 (0x32) - DAC Digital Volume L
- */
-#define WM8350_DAC_VU                           0x0100
-#define WM8350_DACL_VOL_MASK                    0x00FF
-
-/*
- * R51 (0x33) - DAC Digital Volume R
- */
-#define WM8350_DAC_VU                           0x0100
-#define WM8350_DACR_VOL_MASK                    0x00FF
-
-/*
- * R53 (0x35) - DAC LR Rate
- */
-#define WM8350_DACLRC_ENA                       0x0800
-#define WM8350_DACLRC_RATE_MASK                 0x07FF
-
-/*
- * R54 (0x36) - DAC Clock Control
- */
-#define WM8350_DACCLK_POL                       0x0010
-#define WM8350_DAC_CLKDIV_MASK                  0x0007
-
-/*
- * R58 (0x3A) - DAC Mute
- */
-#define WM8350_DAC_MUTE_ENA                     0x4000
-
-/*
- * R59 (0x3B) - DAC Mute Volume
- */
-#define WM8350_DAC_MUTEMODE                     0x4000
-#define WM8350_DAC_MUTERATE                     0x2000
-#define WM8350_DAC_SB_FILT                      0x1000
-
-/*
- * R60 (0x3C) - DAC Side
- */
-#define WM8350_ADC_TO_DACL_MASK                 0x3000
-#define WM8350_ADC_TO_DACR_MASK                 0x0C00
-
-/*
- * R64 (0x40) - ADC Control
- */
-#define WM8350_ADC_HPF_CUT_MASK                 0x0300
-#define WM8350_ADCL_DATINV                      0x0002
-#define WM8350_ADCR_DATINV                      0x0001
-
-/*
- * R66 (0x42) - ADC Digital Volume L
- */
-#define WM8350_ADC_VU                           0x0100
-#define WM8350_ADCL_VOL_MASK                    0x00FF
-
-/*
- * R67 (0x43) - ADC Digital Volume R
- */
-#define WM8350_ADC_VU                           0x0100
-#define WM8350_ADCR_VOL_MASK                    0x00FF
-
-/*
- * R68 (0x44) - ADC Divider
- */
-#define WM8350_ADCL_DAC_SVOL_MASK               0x0F00
-#define WM8350_ADCR_DAC_SVOL_MASK               0x00F0
-#define WM8350_ADCCLK_POL                       0x0008
-#define WM8350_ADC_CLKDIV_MASK                  0x0007
-
-/*
- * R70 (0x46) - ADC LR Rate
- */
-#define WM8350_ADCLRC_ENA                       0x0800
-#define WM8350_ADCLRC_RATE_MASK                 0x07FF
-
-/*
- * R72 (0x48) - Input Control
- */
-#define WM8350_IN2R_ENA                         0x0400
-#define WM8350_IN1RN_ENA                        0x0200
-#define WM8350_IN1RP_ENA                        0x0100
-#define WM8350_IN2L_ENA                         0x0004
-#define WM8350_IN1LN_ENA                        0x0002
-#define WM8350_IN1LP_ENA                        0x0001
-
-/*
- * R73 (0x49) - IN3 Input Control
- */
-#define WM8350_IN3R_SHORT                       0x4000
-#define WM8350_IN3L_SHORT                       0x0040
-
-/*
- * R74 (0x4A) - Mic Bias Control
- */
-#define WM8350_MICBSEL                          0x4000
-#define WM8350_MCDTHR_MASK                      0x001C
-#define WM8350_MCDSCTHR_MASK                    0x0003
-
-/*
- * R76 (0x4C) - Output Control
- */
-#define WM8350_OUT4_VROI                        0x0800
-#define WM8350_OUT3_VROI                        0x0400
-#define WM8350_OUT2_VROI                        0x0200
-#define WM8350_OUT1_VROI                        0x0100
-#define WM8350_OUT2_FB                          0x0004
-#define WM8350_OUT1_FB                          0x0001
-
-/*
- * R77 (0x4D) - Jack Detect
- */
-#define WM8350_JDL_ENA                          0x8000
-#define WM8350_JDR_ENA                          0x4000
-
-/*
- * R78 (0x4E) - Anti Pop Control
- */
-#define WM8350_ANTI_POP_MASK                    0x0300
-#define WM8350_DIS_OP_LN4_MASK                  0x00C0
-#define WM8350_DIS_OP_LN3_MASK                  0x0030
-#define WM8350_DIS_OP_OUT2_MASK                 0x000C
-#define WM8350_DIS_OP_OUT1_MASK                 0x0003
-
-/*
- * R80 (0x50) - Left Input Volume
- */
-#define WM8350_INL_MUTE                         0x4000
-#define WM8350_INL_ZC                           0x2000
-#define WM8350_IN_VU                            0x0100
-#define WM8350_INL_VOL_MASK                     0x00FC
-
-/*
- * R81 (0x51) - Right Input Volume
- */
-#define WM8350_INR_MUTE                         0x4000
-#define WM8350_INR_ZC                           0x2000
-#define WM8350_IN_VU                            0x0100
-#define WM8350_INR_VOL_MASK                     0x00FC
-
-/*
- * R88 (0x58) - Left Mixer Control
- */
-#define WM8350_DACR_TO_MIXOUTL                  0x1000
-#define WM8350_DACL_TO_MIXOUTL                  0x0800
-#define WM8350_IN3L_TO_MIXOUTL                  0x0004
-#define WM8350_INR_TO_MIXOUTL                   0x0002
-#define WM8350_INL_TO_MIXOUTL                   0x0001
-
-/*
- * R89 (0x59) - Right Mixer Control
- */
-#define WM8350_DACR_TO_MIXOUTR                  0x1000
-#define WM8350_DACL_TO_MIXOUTR                  0x0800
-#define WM8350_IN3R_TO_MIXOUTR                  0x0008
-#define WM8350_INR_TO_MIXOUTR                   0x0002
-#define WM8350_INL_TO_MIXOUTR                   0x0001
-
-/*
- * R92 (0x5C) - OUT3 Mixer Control
- */
-#define WM8350_DACL_TO_OUT3                     0x0800
-#define WM8350_MIXINL_TO_OUT3                   0x0100
-#define WM8350_OUT4_TO_OUT3                     0x0008
-#define WM8350_MIXOUTL_TO_OUT3                  0x0001
-
-/*
- * R93 (0x5D) - OUT4 Mixer Control
- */
-#define WM8350_DACR_TO_OUT4                     0x1000
-#define WM8350_DACL_TO_OUT4                     0x0800
-#define WM8350_OUT4_ATTN                        0x0400
-#define WM8350_MIXINR_TO_OUT4                   0x0200
-#define WM8350_OUT3_TO_OUT4                     0x0004
-#define WM8350_MIXOUTR_TO_OUT4                  0x0002
-#define WM8350_MIXOUTL_TO_OUT4                  0x0001
-
-/*
- * R96 (0x60) - Output Left Mixer Volume
- */
-#define WM8350_IN3L_MIXOUTL_VOL_MASK            0x0E00
-#define WM8350_IN3L_MIXOUTL_VOL_SHIFT                9
-#define WM8350_INR_MIXOUTL_VOL_MASK             0x00E0
-#define WM8350_INR_MIXOUTL_VOL_SHIFT                 5
-#define WM8350_INL_MIXOUTL_VOL_MASK             0x000E
-#define WM8350_INL_MIXOUTL_VOL_SHIFT                 1
-
-/* Bit values for R96 (0x60) */
-#define WM8350_IN3L_MIXOUTL_VOL_OFF                  0
-#define WM8350_IN3L_MIXOUTL_VOL_M12DB                1
-#define WM8350_IN3L_MIXOUTL_VOL_M9DB                 2
-#define WM8350_IN3L_MIXOUTL_VOL_M6DB                 3
-#define WM8350_IN3L_MIXOUTL_VOL_M3DB                 4
-#define WM8350_IN3L_MIXOUTL_VOL_0DB                  5
-#define WM8350_IN3L_MIXOUTL_VOL_3DB                  6
-#define WM8350_IN3L_MIXOUTL_VOL_6DB                  7
-
-#define WM8350_INR_MIXOUTL_VOL_OFF                   0
-#define WM8350_INR_MIXOUTL_VOL_M12DB                 1
-#define WM8350_INR_MIXOUTL_VOL_M9DB                  2
-#define WM8350_INR_MIXOUTL_VOL_M6DB                  3
-#define WM8350_INR_MIXOUTL_VOL_M3DB                  4
-#define WM8350_INR_MIXOUTL_VOL_0DB                   5
-#define WM8350_INR_MIXOUTL_VOL_3DB                   6
-#define WM8350_INR_MIXOUTL_VOL_6DB                   7
-
-#define WM8350_INL_MIXOUTL_VOL_OFF                   0
-#define WM8350_INL_MIXOUTL_VOL_M12DB                 1
-#define WM8350_INL_MIXOUTL_VOL_M9DB                  2
-#define WM8350_INL_MIXOUTL_VOL_M6DB                  3
-#define WM8350_INL_MIXOUTL_VOL_M3DB                  4
-#define WM8350_INL_MIXOUTL_VOL_0DB                   5
-#define WM8350_INL_MIXOUTL_VOL_3DB                   6
-#define WM8350_INL_MIXOUTL_VOL_6DB                   7
-
-/*
- * R97 (0x61) - Output Right Mixer Volume
- */
-#define WM8350_IN3R_MIXOUTR_VOL_MASK            0xE000
-#define WM8350_IN3R_MIXOUTR_VOL_SHIFT               13
-#define WM8350_INR_MIXOUTR_VOL_MASK             0x00E0
-#define WM8350_INR_MIXOUTR_VOL_SHIFT                 5
-#define WM8350_INL_MIXOUTR_VOL_MASK             0x000E
-#define WM8350_INL_MIXOUTR_VOL_SHIFT                 1
-
-/* Bit values for R96 (0x60) */
-#define WM8350_IN3R_MIXOUTR_VOL_OFF                  0
-#define WM8350_IN3R_MIXOUTR_VOL_M12DB                1
-#define WM8350_IN3R_MIXOUTR_VOL_M9DB                 2
-#define WM8350_IN3R_MIXOUTR_VOL_M6DB                 3
-#define WM8350_IN3R_MIXOUTR_VOL_M3DB                 4
-#define WM8350_IN3R_MIXOUTR_VOL_0DB                  5
-#define WM8350_IN3R_MIXOUTR_VOL_3DB                  6
-#define WM8350_IN3R_MIXOUTR_VOL_6DB                  7
-
-#define WM8350_INR_MIXOUTR_VOL_OFF                   0
-#define WM8350_INR_MIXOUTR_VOL_M12DB                 1
-#define WM8350_INR_MIXOUTR_VOL_M9DB                  2
-#define WM8350_INR_MIXOUTR_VOL_M6DB                  3
-#define WM8350_INR_MIXOUTR_VOL_M3DB                  4
-#define WM8350_INR_MIXOUTR_VOL_0DB                   5
-#define WM8350_INR_MIXOUTR_VOL_3DB                   6
-#define WM8350_INR_MIXOUTR_VOL_6DB                   7
-
-#define WM8350_INL_MIXOUTR_VOL_OFF                   0
-#define WM8350_INL_MIXOUTR_VOL_M12DB                 1
-#define WM8350_INL_MIXOUTR_VOL_M9DB                  2
-#define WM8350_INL_MIXOUTR_VOL_M6DB                  3
-#define WM8350_INL_MIXOUTR_VOL_M3DB                  4
-#define WM8350_INL_MIXOUTR_VOL_0DB                   5
-#define WM8350_INL_MIXOUTR_VOL_3DB                   6
-#define WM8350_INL_MIXOUTR_VOL_6DB                   7
-
-/*
- * R98 (0x62) - Input Mixer Volume L
- */
-#define WM8350_IN3L_MIXINL_VOL_MASK             0x0E00
-#define WM8350_IN2L_MIXINL_VOL_MASK             0x000E
-#define WM8350_INL_MIXINL_VOL                   0x0001
-
-/*
- * R99 (0x63) - Input Mixer Volume R
- */
-#define WM8350_IN3R_MIXINR_VOL_MASK             0xE000
-#define WM8350_IN2R_MIXINR_VOL_MASK             0x00E0
-#define WM8350_INR_MIXINR_VOL                   0x0001
-
-/*
- * R100 (0x64) - Input Mixer Volume
- */
-#define WM8350_OUT4_MIXIN_DST                   0x8000
-#define WM8350_OUT4_MIXIN_VOL_MASK              0x000E
-
-/*
- * R104 (0x68) - LOUT1 Volume
- */
-#define WM8350_OUT1L_MUTE                       0x4000
-#define WM8350_OUT1L_ZC                         0x2000
-#define WM8350_OUT1_VU                          0x0100
-#define WM8350_OUT1L_VOL_MASK                   0x00FC
-#define WM8350_OUT1L_VOL_SHIFT                       2
-
-/*
- * R105 (0x69) - ROUT1 Volume
- */
-#define WM8350_OUT1R_MUTE                       0x4000
-#define WM8350_OUT1R_ZC                         0x2000
-#define WM8350_OUT1_VU                          0x0100
-#define WM8350_OUT1R_VOL_MASK                   0x00FC
-#define WM8350_OUT1R_VOL_SHIFT                       2
-
-/*
- * R106 (0x6A) - LOUT2 Volume
- */
-#define WM8350_OUT2L_MUTE                       0x4000
-#define WM8350_OUT2L_ZC                         0x2000
-#define WM8350_OUT2_VU                          0x0100
-#define WM8350_OUT2L_VOL_MASK                   0x00FC
-
-/*
- * R107 (0x6B) - ROUT2 Volume
- */
-#define WM8350_OUT2R_MUTE                       0x4000
-#define WM8350_OUT2R_ZC                         0x2000
-#define WM8350_OUT2R_INV                        0x0400
-#define WM8350_OUT2R_INV_MUTE                   0x0200
-#define WM8350_OUT2_VU                          0x0100
-#define WM8350_OUT2R_VOL_MASK                   0x00FC
-
-/*
- * R111 (0x6F) - BEEP Volume
- */
-#define WM8350_IN3R_OUT2R_VOL_MASK              0x00E0
-
-/*
- * R112 (0x70) - AI Formating
- */
-#define WM8350_AIF_BCLK_INV                     0x8000
-#define WM8350_AIF_TRI                          0x2000
-#define WM8350_AIF_LRCLK_INV                    0x1000
-#define WM8350_AIF_WL_MASK                      0x0C00
-#define WM8350_AIF_FMT_MASK                     0x0300
-
-/*
- * R113 (0x71) - ADC DAC COMP
- */
-#define WM8350_DAC_COMP                         0x0080
-#define WM8350_DAC_COMPMODE                     0x0040
-#define WM8350_ADC_COMP                         0x0020
-#define WM8350_ADC_COMPMODE                     0x0010
-#define WM8350_LOOPBACK                         0x0001
-
-/*
- * R114 (0x72) - AI ADC Control
- */
-#define WM8350_AIFADC_PD                        0x0080
-#define WM8350_AIFADCL_SRC                      0x0040
-#define WM8350_AIFADCR_SRC                      0x0020
-#define WM8350_AIFADC_TDM_CHAN                  0x0010
-#define WM8350_AIFADC_TDM                       0x0008
-
-/*
- * R115 (0x73) - AI DAC Control
- */
-#define WM8350_BCLK_MSTR                        0x4000
-#define WM8350_AIFDAC_PD                        0x0080
-#define WM8350_DACL_SRC                         0x0040
-#define WM8350_DACR_SRC                         0x0020
-#define WM8350_AIFDAC_TDM_CHAN                  0x0010
-#define WM8350_AIFDAC_TDM                       0x0008
-#define WM8350_DAC_BOOST_MASK                   0x0003
-
-/*
- * R116 (0x74) - AIF Test
- */
-#define WM8350_CODEC_BYP                        0x4000
-#define WM8350_AIFADC_WR_TST                    0x2000
-#define WM8350_AIFADC_RD_TST                    0x1000
-#define WM8350_AIFDAC_WR_TST                    0x0800
-#define WM8350_AIFDAC_RD_TST                    0x0400
-#define WM8350_AIFADC_ASYN                      0x0020
-#define WM8350_AIFDAC_ASYN                      0x0010
-
-/*
- * R231 (0xE7) - Jack Status
- */
-#define WM8350_JACK_L_LVL			0x0800
-#define WM8350_JACK_R_LVL                       0x0400
-#define WM8350_JACK_MICSCD_LVL			0x0200
-#define WM8350_JACK_MICSD_LVL			0x0100
-
-/*
- * WM8350 Platform setup
- */
-#define WM8350_S_CURVE_NONE			0x0
-#define WM8350_S_CURVE_FAST			0x1
-#define WM8350_S_CURVE_MEDIUM			0x2
-#define WM8350_S_CURVE_SLOW			0x3
-
-#define WM8350_DISCHARGE_OFF			0x0
-#define WM8350_DISCHARGE_FAST			0x1
-#define WM8350_DISCHARGE_MEDIUM			0x2
-#define WM8350_DISCHARGE_SLOW			0x3
-
-#define WM8350_TIE_OFF_500R			0x0
-#define WM8350_TIE_OFF_30K			0x1
-
-/*
- * Clock sources & directions
- */
-#define WM8350_SYSCLK				0
-
-#define WM8350_MCLK_SEL_PLL_MCLK		0
-#define WM8350_MCLK_SEL_PLL_DAC			1
-#define WM8350_MCLK_SEL_PLL_ADC			2
-#define WM8350_MCLK_SEL_PLL_32K			3
-#define WM8350_MCLK_SEL_MCLK			5
-
-/* clock divider id's */
-#define WM8350_ADC_CLKDIV			0
-#define WM8350_DAC_CLKDIV			1
-#define WM8350_BCLK_CLKDIV			2
-#define WM8350_OPCLK_CLKDIV			3
-#define WM8350_TO_CLKDIV			4
-#define WM8350_SYS_CLKDIV			5
-#define WM8350_DACLR_CLKDIV			6
-#define WM8350_ADCLR_CLKDIV			7
-
-/* ADC clock dividers */
-#define WM8350_ADCDIV_1				0x0
-#define WM8350_ADCDIV_1_5			0x1
-#define WM8350_ADCDIV_2				0x2
-#define WM8350_ADCDIV_3				0x3
-#define WM8350_ADCDIV_4				0x4
-#define WM8350_ADCDIV_5_5			0x5
-#define WM8350_ADCDIV_6				0x6
-
-/* ADC clock dividers */
-#define WM8350_DACDIV_1				0x0
-#define WM8350_DACDIV_1_5			0x1
-#define WM8350_DACDIV_2				0x2
-#define WM8350_DACDIV_3				0x3
-#define WM8350_DACDIV_4				0x4
-#define WM8350_DACDIV_5_5			0x5
-#define WM8350_DACDIV_6				0x6
-
-/* BCLK clock dividers */
-#define WM8350_BCLK_DIV_1			(0x0 << 4)
-#define WM8350_BCLK_DIV_1_5			(0x1 << 4)
-#define WM8350_BCLK_DIV_2			(0x2 << 4)
-#define WM8350_BCLK_DIV_3			(0x3 << 4)
-#define WM8350_BCLK_DIV_4			(0x4 << 4)
-#define WM8350_BCLK_DIV_5_5			(0x5 << 4)
-#define WM8350_BCLK_DIV_6			(0x6 << 4)
-#define WM8350_BCLK_DIV_8			(0x7 << 4)
-#define WM8350_BCLK_DIV_11			(0x8 << 4)
-#define WM8350_BCLK_DIV_12			(0x9 << 4)
-#define WM8350_BCLK_DIV_16			(0xa << 4)
-#define WM8350_BCLK_DIV_22			(0xb << 4)
-#define WM8350_BCLK_DIV_24			(0xc << 4)
-#define WM8350_BCLK_DIV_32			(0xd << 4)
-#define WM8350_BCLK_DIV_44			(0xe << 4)
-#define WM8350_BCLK_DIV_48			(0xf << 4)
-
-/* Sys (MCLK) clock dividers */
-#define WM8350_MCLK_DIV_1			(0x0 << 8)
-#define WM8350_MCLK_DIV_2			(0x1 << 8)
-
-/* OP clock dividers */
-#define WM8350_OPCLK_DIV_1			0x0
-#define WM8350_OPCLK_DIV_2			0x1
-#define WM8350_OPCLK_DIV_3			0x2
-#define WM8350_OPCLK_DIV_4			0x3
-#define WM8350_OPCLK_DIV_5_5			0x4
-#define WM8350_OPCLK_DIV_6			0x5
-
-/* DAI ID */
-#define WM8350_HIFI_DAI				0
-
-/*
- * Audio interrupts.
- */
-#define WM8350_IRQ_CODEC_JCK_DET_L		39
-#define WM8350_IRQ_CODEC_JCK_DET_R		40
-#define WM8350_IRQ_CODEC_MICSCD			41
-#define WM8350_IRQ_CODEC_MICD			42
-
-/*
- * WM8350 Platform data.
- *
- * This must be initialised per platform for best audio performance.
- * Please see WM8350 datasheet for information.
- */
-struct wm8350_audio_platform_data {
-	int vmid_discharge_msecs;	/* VMID --> OFF discharge time */
-	int drain_msecs;	/* OFF drain time */
-	int cap_discharge_msecs;	/* Cap ON (from OFF) discharge time */
-	int vmid_charge_msecs;	/* vmid power up time */
-	u32 vmid_s_curve:2;	/* vmid enable s curve speed */
-	u32 dis_out4:2;		/* out4 discharge speed */
-	u32 dis_out3:2;		/* out3 discharge speed */
-	u32 dis_out2:2;		/* out2 discharge speed */
-	u32 dis_out1:2;		/* out1 discharge speed */
-	u32 vroi_out4:1;	/* out4 tie off */
-	u32 vroi_out3:1;	/* out3 tie off */
-	u32 vroi_out2:1;	/* out2 tie off */
-	u32 vroi_out1:1;	/* out1 tie off */
-	u32 vroi_enable:1;	/* enable tie off */
-	u32 codec_current_on:2;	/* current level ON */
-	u32 codec_current_standby:2;	/* current level STANDBY */
-	u32 codec_current_charge:2;	/* codec current @ vmid charge */
-};
-
-struct snd_soc_codec;
-
-struct wm8350_codec {
-	struct platform_device *pdev;
-	struct snd_soc_codec *codec;
-	struct wm8350_audio_platform_data *platform_data;
-};
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/mfd/wm8350/comparator.h b/ANDROID_3.4.5/include/linux/mfd/wm8350/comparator.h
deleted file mode 100644
index 54bc5d0f..00000000
--- a/ANDROID_3.4.5/include/linux/mfd/wm8350/comparator.h
+++ /dev/null
@@ -1,175 +0,0 @@
-/*
- * comparator.h  --  Comparator Aux ADC for Wolfson WM8350 PMIC
- *
- * Copyright 2007 Wolfson Microelectronics PLC
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- */
-
-#ifndef __LINUX_MFD_WM8350_COMPARATOR_H_
-#define __LINUX_MFD_WM8350_COMPARATOR_H_
-
-/*
- * Registers
- */
-
-#define WM8350_DIGITISER_CONTROL_1              0x90
-#define WM8350_DIGITISER_CONTROL_2              0x91
-#define WM8350_AUX1_READBACK                    0x98
-#define WM8350_AUX2_READBACK                    0x99
-#define WM8350_AUX3_READBACK                    0x9A
-#define WM8350_AUX4_READBACK                    0x9B
-#define WM8350_CHIP_TEMP_READBACK               0x9F
-#define WM8350_GENERIC_COMPARATOR_CONTROL       0xA3
-#define WM8350_GENERIC_COMPARATOR_1             0xA4
-#define WM8350_GENERIC_COMPARATOR_2             0xA5
-#define WM8350_GENERIC_COMPARATOR_3             0xA6
-#define WM8350_GENERIC_COMPARATOR_4             0xA7
-
-/*
- * R144 (0x90) - Digitiser Control (1)
- */
-#define WM8350_AUXADC_CTC                       0x4000
-#define WM8350_AUXADC_POLL                      0x2000
-#define WM8350_AUXADC_HIB_MODE                  0x1000
-#define WM8350_AUXADC_SEL8                      0x0080
-#define WM8350_AUXADC_SEL7                      0x0040
-#define WM8350_AUXADC_SEL6                      0x0020
-#define WM8350_AUXADC_SEL5                      0x0010
-#define WM8350_AUXADC_SEL4                      0x0008
-#define WM8350_AUXADC_SEL3                      0x0004
-#define WM8350_AUXADC_SEL2                      0x0002
-#define WM8350_AUXADC_SEL1                      0x0001
-
-/*
- * R145 (0x91) - Digitiser Control (2)
- */
-#define WM8350_AUXADC_MASKMODE_MASK             0x3000
-#define WM8350_AUXADC_CRATE_MASK                0x0700
-#define WM8350_AUXADC_CAL                       0x0004
-#define WM8350_AUX_RBMODE                       0x0002
-#define WM8350_AUXADC_WAIT                      0x0001
-
-/*
- * R152 (0x98) - AUX1 Readback
- */
-#define WM8350_AUXADC_SCALE1_MASK               0x6000
-#define WM8350_AUXADC_REF1                      0x1000
-#define WM8350_AUXADC_DATA1_MASK                0x0FFF
-
-/*
- * R153 (0x99) - AUX2 Readback
- */
-#define WM8350_AUXADC_SCALE2_MASK               0x6000
-#define WM8350_AUXADC_REF2                      0x1000
-#define WM8350_AUXADC_DATA2_MASK                0x0FFF
-
-/*
- * R154 (0x9A) - AUX3 Readback
- */
-#define WM8350_AUXADC_SCALE3_MASK               0x6000
-#define WM8350_AUXADC_REF3                      0x1000
-#define WM8350_AUXADC_DATA3_MASK                0x0FFF
-
-/*
- * R155 (0x9B) - AUX4 Readback
- */
-#define WM8350_AUXADC_SCALE4_MASK               0x6000
-#define WM8350_AUXADC_REF4                      0x1000
-#define WM8350_AUXADC_DATA4_MASK                0x0FFF
-
-/*
- * R156 (0x9C) - USB Voltage Readback
- */
-#define WM8350_AUXADC_DATA_USB_MASK             0x0FFF
-
-/*
- * R157 (0x9D) - LINE Voltage Readback
- */
-#define WM8350_AUXADC_DATA_LINE_MASK            0x0FFF
-
-/*
- * R158 (0x9E) - BATT Voltage Readback
- */
-#define WM8350_AUXADC_DATA_BATT_MASK            0x0FFF
-
-/*
- * R159 (0x9F) - Chip Temp Readback
- */
-#define WM8350_AUXADC_DATA_CHIPTEMP_MASK        0x0FFF
-
-/*
- * R163 (0xA3) - Generic Comparator Control
- */
-#define WM8350_DCMP4_ENA                        0x0008
-#define WM8350_DCMP3_ENA                        0x0004
-#define WM8350_DCMP2_ENA                        0x0002
-#define WM8350_DCMP1_ENA                        0x0001
-
-/*
- * R164 (0xA4) - Generic comparator 1
- */
-#define WM8350_DCMP1_SRCSEL_MASK                0xE000
-#define WM8350_DCMP1_GT                         0x1000
-#define WM8350_DCMP1_THR_MASK                   0x0FFF
-
-/*
- * R165 (0xA5) - Generic comparator 2
- */
-#define WM8350_DCMP2_SRCSEL_MASK                0xE000
-#define WM8350_DCMP2_GT                         0x1000
-#define WM8350_DCMP2_THR_MASK                   0x0FFF
-
-/*
- * R166 (0xA6) - Generic comparator 3
- */
-#define WM8350_DCMP3_SRCSEL_MASK                0xE000
-#define WM8350_DCMP3_GT                         0x1000
-#define WM8350_DCMP3_THR_MASK                   0x0FFF
-
-/*
- * R167 (0xA7) - Generic comparator 4
- */
-#define WM8350_DCMP4_SRCSEL_MASK                0xE000
-#define WM8350_DCMP4_GT                         0x1000
-#define WM8350_DCMP4_THR_MASK                   0x0FFF
-
-/*
- * Interrupts.
- */
-#define WM8350_IRQ_AUXADC_DATARDY		16
-#define WM8350_IRQ_AUXADC_DCOMP4		17
-#define WM8350_IRQ_AUXADC_DCOMP3		18
-#define WM8350_IRQ_AUXADC_DCOMP2		19
-#define WM8350_IRQ_AUXADC_DCOMP1		20
-#define WM8350_IRQ_SYS_HYST_COMP_FAIL		21
-#define WM8350_IRQ_SYS_CHIP_GT115		22
-#define WM8350_IRQ_SYS_CHIP_GT140		23
-
-/*
- * USB/2, LINE & BATT = ((VRTC * 2) / 4095)) * 10e6 uV
- * Where VRTC = 2.7 V
- */
-#define WM8350_AUX_COEFF			1319
-
-#define WM8350_AUXADC_AUX1			0
-#define WM8350_AUXADC_AUX2			1
-#define WM8350_AUXADC_AUX3			2
-#define WM8350_AUXADC_AUX4			3
-#define WM8350_AUXADC_USB			4
-#define WM8350_AUXADC_LINE			5
-#define WM8350_AUXADC_BATT			6
-#define WM8350_AUXADC_TEMP			7
-
-struct wm8350;
-
-/*
- * AUX ADC Readback
- */
-int wm8350_read_auxadc(struct wm8350 *wm8350, int channel, int scale,
-		       int vref);
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/mfd/wm8350/core.h b/ANDROID_3.4.5/include/linux/mfd/wm8350/core.h
deleted file mode 100644
index 98fcc977..00000000
--- a/ANDROID_3.4.5/include/linux/mfd/wm8350/core.h
+++ /dev/null
@@ -1,713 +0,0 @@
-/*
- * core.h  --  Core Driver for Wolfson WM8350 PMIC
- *
- * Copyright 2007 Wolfson Microelectronics PLC
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- */
-
-#ifndef __LINUX_MFD_WM8350_CORE_H_
-#define __LINUX_MFD_WM8350_CORE_H_
-
-#include <linux/kernel.h>
-#include <linux/mutex.h>
-#include <linux/interrupt.h>
-#include <linux/completion.h>
-
-#include <linux/mfd/wm8350/audio.h>
-#include <linux/mfd/wm8350/gpio.h>
-#include <linux/mfd/wm8350/pmic.h>
-#include <linux/mfd/wm8350/rtc.h>
-#include <linux/mfd/wm8350/supply.h>
-#include <linux/mfd/wm8350/wdt.h>
-
-/*
- * Register values.
- */
-#define WM8350_RESET_ID                         0x00
-#define WM8350_ID                               0x01
-#define WM8350_REVISION				0x02
-#define WM8350_SYSTEM_CONTROL_1                 0x03
-#define WM8350_SYSTEM_CONTROL_2                 0x04
-#define WM8350_SYSTEM_HIBERNATE                 0x05
-#define WM8350_INTERFACE_CONTROL                0x06
-#define WM8350_POWER_MGMT_1                     0x08
-#define WM8350_POWER_MGMT_2                     0x09
-#define WM8350_POWER_MGMT_3                     0x0A
-#define WM8350_POWER_MGMT_4                     0x0B
-#define WM8350_POWER_MGMT_5                     0x0C
-#define WM8350_POWER_MGMT_6                     0x0D
-#define WM8350_POWER_MGMT_7                     0x0E
-
-#define WM8350_SYSTEM_INTERRUPTS                0x18
-#define WM8350_INT_STATUS_1                     0x19
-#define WM8350_INT_STATUS_2                     0x1A
-#define WM8350_POWER_UP_INT_STATUS              0x1B
-#define WM8350_UNDER_VOLTAGE_INT_STATUS         0x1C
-#define WM8350_OVER_CURRENT_INT_STATUS          0x1D
-#define WM8350_GPIO_INT_STATUS                  0x1E
-#define WM8350_COMPARATOR_INT_STATUS            0x1F
-#define WM8350_SYSTEM_INTERRUPTS_MASK           0x20
-#define WM8350_INT_STATUS_1_MASK                0x21
-#define WM8350_INT_STATUS_2_MASK                0x22
-#define WM8350_POWER_UP_INT_STATUS_MASK         0x23
-#define WM8350_UNDER_VOLTAGE_INT_STATUS_MASK    0x24
-#define WM8350_OVER_CURRENT_INT_STATUS_MASK     0x25
-#define WM8350_GPIO_INT_STATUS_MASK             0x26
-#define WM8350_COMPARATOR_INT_STATUS_MASK       0x27
-#define WM8350_CHARGER_OVERRIDES		0xE2
-#define WM8350_MISC_OVERRIDES			0xE3
-#define WM8350_COMPARATOR_OVERRIDES		0xE7
-#define WM8350_STATE_MACHINE_STATUS		0xE9
-
-#define WM8350_MAX_REGISTER                     0xFF
-
-/*
- * Field Definitions.
- */
-
-/*
- * R0 (0x00) - Reset/ID
- */
-#define WM8350_SW_RESET_CHIP_ID_MASK            0xFFFF
-
-/*
- * R1 (0x01) - ID
- */
-#define WM8350_CHIP_REV_MASK                    0x7000
-#define WM8350_CONF_STS_MASK                    0x0C00
-#define WM8350_CUST_ID_MASK                     0x00FF
-
-/*
- * R2 (0x02) - Revision
- */
-#define WM8350_MASK_REV_MASK			0x00FF
-
-/*
- * R3 (0x03) - System Control 1
- */
-#define WM8350_CHIP_ON                          0x8000
-#define WM8350_POWERCYCLE                       0x2000
-#define WM8350_VCC_FAULT_OV                     0x1000
-#define WM8350_REG_RSTB_TIME_MASK               0x0C00
-#define WM8350_BG_SLEEP                         0x0200
-#define WM8350_MEM_VALID                        0x0020
-#define WM8350_CHIP_SET_UP                      0x0010
-#define WM8350_ON_DEB_T                         0x0008
-#define WM8350_ON_POL                           0x0002
-#define WM8350_IRQ_POL                          0x0001
-
-/*
- * R4 (0x04) - System Control 2
- */
-#define WM8350_USB_SUSPEND_8MA                  0x8000
-#define WM8350_USB_SUSPEND                      0x4000
-#define WM8350_USB_MSTR                         0x2000
-#define WM8350_USB_MSTR_SRC                     0x1000
-#define WM8350_USB_500MA                        0x0800
-#define WM8350_USB_NOLIM                        0x0400
-
-/*
- * R5 (0x05) - System Hibernate
- */
-#define WM8350_HIBERNATE                        0x8000
-#define WM8350_WDOG_HIB_MODE                    0x0080
-#define WM8350_REG_HIB_STARTUP_SEQ              0x0040
-#define WM8350_REG_RESET_HIB_MODE               0x0020
-#define WM8350_RST_HIB_MODE                     0x0010
-#define WM8350_IRQ_HIB_MODE                     0x0008
-#define WM8350_MEMRST_HIB_MODE                  0x0004
-#define WM8350_PCCOMP_HIB_MODE                  0x0002
-#define WM8350_TEMPMON_HIB_MODE                 0x0001
-
-/*
- * R6 (0x06) - Interface Control
- */
-#define WM8350_USE_DEV_PINS                     0x8000
-#define WM8350_USE_DEV_PINS_MASK                0x8000
-#define WM8350_USE_DEV_PINS_SHIFT                   15
-#define WM8350_DEV_ADDR_MASK                    0x6000
-#define WM8350_DEV_ADDR_SHIFT                       13
-#define WM8350_CONFIG_DONE                      0x1000
-#define WM8350_CONFIG_DONE_MASK                 0x1000
-#define WM8350_CONFIG_DONE_SHIFT                    12
-#define WM8350_RECONFIG_AT_ON                   0x0800
-#define WM8350_RECONFIG_AT_ON_MASK              0x0800
-#define WM8350_RECONFIG_AT_ON_SHIFT                 11
-#define WM8350_AUTOINC                          0x0200
-#define WM8350_AUTOINC_MASK                     0x0200
-#define WM8350_AUTOINC_SHIFT                         9
-#define WM8350_ARA                              0x0100
-#define WM8350_ARA_MASK                         0x0100
-#define WM8350_ARA_SHIFT                             8
-#define WM8350_SPI_CFG                          0x0008
-#define WM8350_SPI_CFG_MASK                     0x0008
-#define WM8350_SPI_CFG_SHIFT                         3
-#define WM8350_SPI_4WIRE                        0x0004
-#define WM8350_SPI_4WIRE_MASK                   0x0004
-#define WM8350_SPI_4WIRE_SHIFT                       2
-#define WM8350_SPI_3WIRE                        0x0002
-#define WM8350_SPI_3WIRE_MASK                   0x0002
-#define WM8350_SPI_3WIRE_SHIFT                       1
-
-/* Bit values for R06 (0x06) */
-#define WM8350_USE_DEV_PINS_PRIMARY                  0
-#define WM8350_USE_DEV_PINS_DEV                      1
-
-#define WM8350_DEV_ADDR_34                           0
-#define WM8350_DEV_ADDR_36                           1
-#define WM8350_DEV_ADDR_3C                           2
-#define WM8350_DEV_ADDR_3E                           3
-
-#define WM8350_CONFIG_DONE_OFF                       0
-#define WM8350_CONFIG_DONE_DONE                      1
-
-#define WM8350_RECONFIG_AT_ON_OFF                    0
-#define WM8350_RECONFIG_AT_ON_ON                     1
-
-#define WM8350_AUTOINC_OFF                           0
-#define WM8350_AUTOINC_ON                            1
-
-#define WM8350_ARA_OFF                               0
-#define WM8350_ARA_ON                                1
-
-#define WM8350_SPI_CFG_CMOS                          0
-#define WM8350_SPI_CFG_OD                            1
-
-#define WM8350_SPI_4WIRE_3WIRE                       0
-#define WM8350_SPI_4WIRE_4WIRE                       1
-
-#define WM8350_SPI_3WIRE_I2C                         0
-#define WM8350_SPI_3WIRE_SPI                         1
-
-/*
- * R8 (0x08) - Power mgmt (1)
- */
-#define WM8350_CODEC_ISEL_MASK                  0xC000
-#define WM8350_VBUFEN                           0x2000
-#define WM8350_OUTPUT_DRAIN_EN                  0x0400
-#define WM8350_MIC_DET_ENA                      0x0100
-#define WM8350_BIASEN                           0x0020
-#define WM8350_MICBEN                           0x0010
-#define WM8350_VMIDEN                           0x0004
-#define WM8350_VMID_MASK                        0x0003
-#define WM8350_VMID_SHIFT                            0
-
-/*
- * R9 (0x09) - Power mgmt (2)
- */
-#define WM8350_IN3R_ENA                         0x0800
-#define WM8350_IN3L_ENA                         0x0400
-#define WM8350_INR_ENA                          0x0200
-#define WM8350_INL_ENA                          0x0100
-#define WM8350_MIXINR_ENA                       0x0080
-#define WM8350_MIXINL_ENA                       0x0040
-#define WM8350_OUT4_ENA                         0x0020
-#define WM8350_OUT3_ENA                         0x0010
-#define WM8350_MIXOUTR_ENA                      0x0002
-#define WM8350_MIXOUTL_ENA                      0x0001
-
-/*
- * R10 (0x0A) - Power mgmt (3)
- */
-#define WM8350_IN3R_TO_OUT2R                    0x0080
-#define WM8350_OUT2R_ENA                        0x0008
-#define WM8350_OUT2L_ENA                        0x0004
-#define WM8350_OUT1R_ENA                        0x0002
-#define WM8350_OUT1L_ENA                        0x0001
-
-/*
- * R11 (0x0B) - Power mgmt (4)
- */
-#define WM8350_SYSCLK_ENA                       0x4000
-#define WM8350_ADC_HPF_ENA                      0x2000
-#define WM8350_FLL_ENA                          0x0800
-#define WM8350_FLL_OSC_ENA                      0x0400
-#define WM8350_TOCLK_ENA                        0x0100
-#define WM8350_DACR_ENA                         0x0020
-#define WM8350_DACL_ENA                         0x0010
-#define WM8350_ADCR_ENA                         0x0008
-#define WM8350_ADCL_ENA                         0x0004
-
-/*
- * R12 (0x0C) - Power mgmt (5)
- */
-#define WM8350_CODEC_ENA                        0x1000
-#define WM8350_RTC_TICK_ENA                     0x0800
-#define WM8350_OSC32K_ENA                       0x0400
-#define WM8350_CHG_ENA                          0x0200
-#define WM8350_ACC_DET_ENA                      0x0100
-#define WM8350_AUXADC_ENA                       0x0080
-#define WM8350_DCMP4_ENA                        0x0008
-#define WM8350_DCMP3_ENA                        0x0004
-#define WM8350_DCMP2_ENA                        0x0002
-#define WM8350_DCMP1_ENA                        0x0001
-
-/*
- * R13 (0x0D) - Power mgmt (6)
- */
-#define WM8350_LS_ENA                           0x8000
-#define WM8350_LDO4_ENA                         0x0800
-#define WM8350_LDO3_ENA                         0x0400
-#define WM8350_LDO2_ENA                         0x0200
-#define WM8350_LDO1_ENA                         0x0100
-#define WM8350_DC6_ENA                          0x0020
-#define WM8350_DC5_ENA                          0x0010
-#define WM8350_DC4_ENA                          0x0008
-#define WM8350_DC3_ENA                          0x0004
-#define WM8350_DC2_ENA                          0x0002
-#define WM8350_DC1_ENA                          0x0001
-
-/*
- * R14 (0x0E) - Power mgmt (7)
- */
-#define WM8350_CS2_ENA                          0x0002
-#define WM8350_CS1_ENA                          0x0001
-
-/*
- * R24 (0x18) - System Interrupts
- */
-#define WM8350_OC_INT                           0x2000
-#define WM8350_UV_INT                           0x1000
-#define WM8350_PUTO_INT                         0x0800
-#define WM8350_CS_INT                           0x0200
-#define WM8350_EXT_INT                          0x0100
-#define WM8350_CODEC_INT                        0x0080
-#define WM8350_GP_INT                           0x0040
-#define WM8350_AUXADC_INT                       0x0020
-#define WM8350_RTC_INT                          0x0010
-#define WM8350_SYS_INT                          0x0008
-#define WM8350_CHG_INT                          0x0004
-#define WM8350_USB_INT                          0x0002
-#define WM8350_WKUP_INT                         0x0001
-
-/*
- * R25 (0x19) - Interrupt Status 1
- */
-#define WM8350_CHG_BAT_HOT_EINT                 0x8000
-#define WM8350_CHG_BAT_COLD_EINT                0x4000
-#define WM8350_CHG_BAT_FAIL_EINT                0x2000
-#define WM8350_CHG_TO_EINT                      0x1000
-#define WM8350_CHG_END_EINT                     0x0800
-#define WM8350_CHG_START_EINT                   0x0400
-#define WM8350_CHG_FAST_RDY_EINT                0x0200
-#define WM8350_RTC_PER_EINT                     0x0080
-#define WM8350_RTC_SEC_EINT                     0x0040
-#define WM8350_RTC_ALM_EINT                     0x0020
-#define WM8350_CHG_VBATT_LT_3P9_EINT            0x0004
-#define WM8350_CHG_VBATT_LT_3P1_EINT            0x0002
-#define WM8350_CHG_VBATT_LT_2P85_EINT           0x0001
-
-/*
- * R26 (0x1A) - Interrupt Status 2
- */
-#define WM8350_CS1_EINT                         0x2000
-#define WM8350_CS2_EINT                         0x1000
-#define WM8350_USB_LIMIT_EINT                   0x0400
-#define WM8350_AUXADC_DATARDY_EINT              0x0100
-#define WM8350_AUXADC_DCOMP4_EINT               0x0080
-#define WM8350_AUXADC_DCOMP3_EINT               0x0040
-#define WM8350_AUXADC_DCOMP2_EINT               0x0020
-#define WM8350_AUXADC_DCOMP1_EINT               0x0010
-#define WM8350_SYS_HYST_COMP_FAIL_EINT          0x0008
-#define WM8350_SYS_CHIP_GT115_EINT              0x0004
-#define WM8350_SYS_CHIP_GT140_EINT              0x0002
-#define WM8350_SYS_WDOG_TO_EINT                 0x0001
-
-/*
- * R27 (0x1B) - Power Up Interrupt Status
- */
-#define WM8350_PUTO_LDO4_EINT                   0x0800
-#define WM8350_PUTO_LDO3_EINT                   0x0400
-#define WM8350_PUTO_LDO2_EINT                   0x0200
-#define WM8350_PUTO_LDO1_EINT                   0x0100
-#define WM8350_PUTO_DC6_EINT                    0x0020
-#define WM8350_PUTO_DC5_EINT                    0x0010
-#define WM8350_PUTO_DC4_EINT                    0x0008
-#define WM8350_PUTO_DC3_EINT                    0x0004
-#define WM8350_PUTO_DC2_EINT                    0x0002
-#define WM8350_PUTO_DC1_EINT                    0x0001
-
-/*
- * R28 (0x1C) - Under Voltage Interrupt status
- */
-#define WM8350_UV_LDO4_EINT                     0x0800
-#define WM8350_UV_LDO3_EINT                     0x0400
-#define WM8350_UV_LDO2_EINT                     0x0200
-#define WM8350_UV_LDO1_EINT                     0x0100
-#define WM8350_UV_DC6_EINT                      0x0020
-#define WM8350_UV_DC5_EINT                      0x0010
-#define WM8350_UV_DC4_EINT                      0x0008
-#define WM8350_UV_DC3_EINT                      0x0004
-#define WM8350_UV_DC2_EINT                      0x0002
-#define WM8350_UV_DC1_EINT                      0x0001
-
-/*
- * R29 (0x1D) - Over Current Interrupt status
- */
-#define WM8350_OC_LS_EINT                       0x8000
-
-/*
- * R30 (0x1E) - GPIO Interrupt Status
- */
-#define WM8350_GP12_EINT                        0x1000
-#define WM8350_GP11_EINT                        0x0800
-#define WM8350_GP10_EINT                        0x0400
-#define WM8350_GP9_EINT                         0x0200
-#define WM8350_GP8_EINT                         0x0100
-#define WM8350_GP7_EINT                         0x0080
-#define WM8350_GP6_EINT                         0x0040
-#define WM8350_GP5_EINT                         0x0020
-#define WM8350_GP4_EINT                         0x0010
-#define WM8350_GP3_EINT                         0x0008
-#define WM8350_GP2_EINT                         0x0004
-#define WM8350_GP1_EINT                         0x0002
-#define WM8350_GP0_EINT                         0x0001
-
-/*
- * R31 (0x1F) - Comparator Interrupt Status
- */
-#define WM8350_EXT_USB_FB_EINT                  0x8000
-#define WM8350_EXT_WALL_FB_EINT                 0x4000
-#define WM8350_EXT_BAT_FB_EINT                  0x2000
-#define WM8350_CODEC_JCK_DET_L_EINT             0x0800
-#define WM8350_CODEC_JCK_DET_R_EINT             0x0400
-#define WM8350_CODEC_MICSCD_EINT                0x0200
-#define WM8350_CODEC_MICD_EINT                  0x0100
-#define WM8350_WKUP_OFF_STATE_EINT              0x0040
-#define WM8350_WKUP_HIB_STATE_EINT              0x0020
-#define WM8350_WKUP_CONV_FAULT_EINT             0x0010
-#define WM8350_WKUP_WDOG_RST_EINT               0x0008
-#define WM8350_WKUP_GP_PWR_ON_EINT              0x0004
-#define WM8350_WKUP_ONKEY_EINT                  0x0002
-#define WM8350_WKUP_GP_WAKEUP_EINT              0x0001
-
-/*
- * R32 (0x20) - System Interrupts Mask
- */
-#define WM8350_IM_OC_INT                        0x2000
-#define WM8350_IM_UV_INT                        0x1000
-#define WM8350_IM_PUTO_INT                      0x0800
-#define WM8350_IM_SPARE_INT                     0x0400
-#define WM8350_IM_CS_INT                        0x0200
-#define WM8350_IM_EXT_INT                       0x0100
-#define WM8350_IM_CODEC_INT                     0x0080
-#define WM8350_IM_GP_INT                        0x0040
-#define WM8350_IM_AUXADC_INT                    0x0020
-#define WM8350_IM_RTC_INT                       0x0010
-#define WM8350_IM_SYS_INT                       0x0008
-#define WM8350_IM_CHG_INT                       0x0004
-#define WM8350_IM_USB_INT                       0x0002
-#define WM8350_IM_WKUP_INT                      0x0001
-
-/*
- * R33 (0x21) - Interrupt Status 1 Mask
- */
-#define WM8350_IM_CHG_BAT_HOT_EINT              0x8000
-#define WM8350_IM_CHG_BAT_COLD_EINT             0x4000
-#define WM8350_IM_CHG_BAT_FAIL_EINT             0x2000
-#define WM8350_IM_CHG_TO_EINT                   0x1000
-#define WM8350_IM_CHG_END_EINT                  0x0800
-#define WM8350_IM_CHG_START_EINT                0x0400
-#define WM8350_IM_CHG_FAST_RDY_EINT             0x0200
-#define WM8350_IM_RTC_PER_EINT                  0x0080
-#define WM8350_IM_RTC_SEC_EINT                  0x0040
-#define WM8350_IM_RTC_ALM_EINT                  0x0020
-#define WM8350_IM_CHG_VBATT_LT_3P9_EINT         0x0004
-#define WM8350_IM_CHG_VBATT_LT_3P1_EINT         0x0002
-#define WM8350_IM_CHG_VBATT_LT_2P85_EINT        0x0001
-
-/*
- * R34 (0x22) - Interrupt Status 2 Mask
- */
-#define WM8350_IM_SPARE2_EINT                   0x8000
-#define WM8350_IM_SPARE1_EINT                   0x4000
-#define WM8350_IM_CS1_EINT                      0x2000
-#define WM8350_IM_CS2_EINT                      0x1000
-#define WM8350_IM_USB_LIMIT_EINT                0x0400
-#define WM8350_IM_AUXADC_DATARDY_EINT           0x0100
-#define WM8350_IM_AUXADC_DCOMP4_EINT            0x0080
-#define WM8350_IM_AUXADC_DCOMP3_EINT            0x0040
-#define WM8350_IM_AUXADC_DCOMP2_EINT            0x0020
-#define WM8350_IM_AUXADC_DCOMP1_EINT            0x0010
-#define WM8350_IM_SYS_HYST_COMP_FAIL_EINT       0x0008
-#define WM8350_IM_SYS_CHIP_GT115_EINT           0x0004
-#define WM8350_IM_SYS_CHIP_GT140_EINT           0x0002
-#define WM8350_IM_SYS_WDOG_TO_EINT              0x0001
-
-/*
- * R35 (0x23) - Power Up Interrupt Status Mask
- */
-#define WM8350_IM_PUTO_LDO4_EINT                0x0800
-#define WM8350_IM_PUTO_LDO3_EINT                0x0400
-#define WM8350_IM_PUTO_LDO2_EINT                0x0200
-#define WM8350_IM_PUTO_LDO1_EINT                0x0100
-#define WM8350_IM_PUTO_DC6_EINT                 0x0020
-#define WM8350_IM_PUTO_DC5_EINT                 0x0010
-#define WM8350_IM_PUTO_DC4_EINT                 0x0008
-#define WM8350_IM_PUTO_DC3_EINT                 0x0004
-#define WM8350_IM_PUTO_DC2_EINT                 0x0002
-#define WM8350_IM_PUTO_DC1_EINT                 0x0001
-
-/*
- * R36 (0x24) - Under Voltage Interrupt status Mask
- */
-#define WM8350_IM_UV_LDO4_EINT                  0x0800
-#define WM8350_IM_UV_LDO3_EINT                  0x0400
-#define WM8350_IM_UV_LDO2_EINT                  0x0200
-#define WM8350_IM_UV_LDO1_EINT                  0x0100
-#define WM8350_IM_UV_DC6_EINT                   0x0020
-#define WM8350_IM_UV_DC5_EINT                   0x0010
-#define WM8350_IM_UV_DC4_EINT                   0x0008
-#define WM8350_IM_UV_DC3_EINT                   0x0004
-#define WM8350_IM_UV_DC2_EINT                   0x0002
-#define WM8350_IM_UV_DC1_EINT                   0x0001
-
-/*
- * R37 (0x25) - Over Current Interrupt status Mask
- */
-#define WM8350_IM_OC_LS_EINT                    0x8000
-
-/*
- * R38 (0x26) - GPIO Interrupt Status Mask
- */
-#define WM8350_IM_GP12_EINT                     0x1000
-#define WM8350_IM_GP11_EINT                     0x0800
-#define WM8350_IM_GP10_EINT                     0x0400
-#define WM8350_IM_GP9_EINT                      0x0200
-#define WM8350_IM_GP8_EINT                      0x0100
-#define WM8350_IM_GP7_EINT                      0x0080
-#define WM8350_IM_GP6_EINT                      0x0040
-#define WM8350_IM_GP5_EINT                      0x0020
-#define WM8350_IM_GP4_EINT                      0x0010
-#define WM8350_IM_GP3_EINT                      0x0008
-#define WM8350_IM_GP2_EINT                      0x0004
-#define WM8350_IM_GP1_EINT                      0x0002
-#define WM8350_IM_GP0_EINT                      0x0001
-
-/*
- * R39 (0x27) - Comparator Interrupt Status Mask
- */
-#define WM8350_IM_EXT_USB_FB_EINT               0x8000
-#define WM8350_IM_EXT_WALL_FB_EINT              0x4000
-#define WM8350_IM_EXT_BAT_FB_EINT               0x2000
-#define WM8350_IM_CODEC_JCK_DET_L_EINT          0x0800
-#define WM8350_IM_CODEC_JCK_DET_R_EINT          0x0400
-#define WM8350_IM_CODEC_MICSCD_EINT             0x0200
-#define WM8350_IM_CODEC_MICD_EINT               0x0100
-#define WM8350_IM_WKUP_OFF_STATE_EINT           0x0040
-#define WM8350_IM_WKUP_HIB_STATE_EINT           0x0020
-#define WM8350_IM_WKUP_CONV_FAULT_EINT          0x0010
-#define WM8350_IM_WKUP_WDOG_RST_EINT            0x0008
-#define WM8350_IM_WKUP_GP_PWR_ON_EINT           0x0004
-#define WM8350_IM_WKUP_ONKEY_EINT               0x0002
-#define WM8350_IM_WKUP_GP_WAKEUP_EINT           0x0001
-
-/*
- * R220 (0xDC) - RAM BIST 1
- */
-#define WM8350_READ_STATUS                      0x0800
-#define WM8350_TSTRAM_CLK                       0x0100
-#define WM8350_TSTRAM_CLK_ENA                   0x0080
-#define WM8350_STARTSEQ                         0x0040
-#define WM8350_READ_SRC                         0x0020
-#define WM8350_COUNT_DIR                        0x0010
-#define WM8350_TSTRAM_MODE_MASK                 0x000E
-#define WM8350_TSTRAM_ENA                       0x0001
-
-/*
- * R225 (0xE1) - DCDC/LDO status
- */
-#define WM8350_LS_STS                           0x8000
-#define WM8350_LDO4_STS                         0x0800
-#define WM8350_LDO3_STS                         0x0400
-#define WM8350_LDO2_STS                         0x0200
-#define WM8350_LDO1_STS                         0x0100
-#define WM8350_DC6_STS                          0x0020
-#define WM8350_DC5_STS                          0x0010
-#define WM8350_DC4_STS                          0x0008
-#define WM8350_DC3_STS                          0x0004
-#define WM8350_DC2_STS                          0x0002
-#define WM8350_DC1_STS                          0x0001
-
-/*
- * R226 (0xE2) - Charger status
- */
-#define WM8350_CHG_BATT_HOT_OVRDE		0x8000
-#define WM8350_CHG_BATT_COLD_OVRDE		0x4000
-
-/*
- * R227 (0xE3) - Misc Overrides
- */
-#define WM8350_USB_LIMIT_OVRDE			0x0400
-
-/*
- * R227 (0xE7) - Comparator Overrides
- */
-#define WM8350_USB_FB_OVRDE			0x8000
-#define WM8350_WALL_FB_OVRDE			0x4000
-#define WM8350_BATT_FB_OVRDE			0x2000
-
-
-/*
- * R233 (0xE9) - State Machinine Status
- */
-#define WM8350_USB_SM_MASK			0x0700
-#define WM8350_USB_SM_SHIFT			8
-
-#define WM8350_USB_SM_100_SLV   1
-#define WM8350_USB_SM_500_SLV   5
-#define WM8350_USB_SM_STDBY_SLV 7
-
-/* WM8350 wake up conditions */
-#define WM8350_IRQ_WKUP_OFF_STATE		43
-#define WM8350_IRQ_WKUP_HIB_STATE		44
-#define WM8350_IRQ_WKUP_CONV_FAULT		45
-#define WM8350_IRQ_WKUP_WDOG_RST		46
-#define WM8350_IRQ_WKUP_GP_PWR_ON		47
-#define WM8350_IRQ_WKUP_ONKEY			48
-#define WM8350_IRQ_WKUP_GP_WAKEUP		49
-
-/* wm8350 chip revisions */
-#define WM8350_REV_E				0x4
-#define WM8350_REV_F				0x5
-#define WM8350_REV_G				0x6
-#define WM8350_REV_H				0x7
-
-#define WM8350_NUM_IRQ				63
-
-#define WM8350_NUM_IRQ_REGS 7
-
-struct wm8350_reg_access {
-	u16 readable;		/* Mask of readable bits */
-	u16 writable;		/* Mask of writable bits */
-	u16 vol;		/* Mask of volatile bits */
-};
-extern const struct wm8350_reg_access wm8350_reg_io_map[];
-extern const u16 wm8350_mode0_defaults[];
-extern const u16 wm8350_mode1_defaults[];
-extern const u16 wm8350_mode2_defaults[];
-extern const u16 wm8350_mode3_defaults[];
-extern const u16 wm8351_mode0_defaults[];
-extern const u16 wm8351_mode1_defaults[];
-extern const u16 wm8351_mode2_defaults[];
-extern const u16 wm8351_mode3_defaults[];
-extern const u16 wm8352_mode0_defaults[];
-extern const u16 wm8352_mode1_defaults[];
-extern const u16 wm8352_mode2_defaults[];
-extern const u16 wm8352_mode3_defaults[];
-
-struct wm8350;
-
-struct wm8350_hwmon {
-	struct platform_device *pdev;
-	struct device *classdev;
-};
-
-struct wm8350 {
-	struct device *dev;
-
-	/* device IO */
-	union {
-		struct i2c_client *i2c_client;
-		struct spi_device *spi_device;
-	};
-	int (*read_dev)(struct wm8350 *wm8350, char reg, int size, void *dest);
-	int (*write_dev)(struct wm8350 *wm8350, char reg, int size,
-			 void *src);
-	u16 *reg_cache;
-
-	struct mutex auxadc_mutex;
-	struct completion auxadc_done;
-
-	/* Interrupt handling */
-	struct mutex irq_lock;
-	int chip_irq;
-	int irq_base;
-	u16 irq_masks[WM8350_NUM_IRQ_REGS];
-
-	/* Client devices */
-	struct wm8350_codec codec;
-	struct wm8350_gpio gpio;
-	struct wm8350_hwmon hwmon;
-	struct wm8350_pmic pmic;
-	struct wm8350_power power;
-	struct wm8350_rtc rtc;
-	struct wm8350_wdt wdt;
-};
-
-/**
- * Data to be supplied by the platform to initialise the WM8350.
- *
- * @init: Function called during driver initialisation.  Should be
- *        used by the platform to configure GPIO functions and similar.
- * @irq_high: Set if WM8350 IRQ is active high.
- * @irq_base: Base IRQ for genirq (not currently used).
- * @gpio_base: Base for gpiolib.
- */
-struct wm8350_platform_data {
-	int (*init)(struct wm8350 *wm8350);
-	int irq_high;
-	int irq_base;
-	int gpio_base;
-};
-
-
-/*
- * WM8350 device initialisation and exit.
- */
-int wm8350_device_init(struct wm8350 *wm8350, int irq,
-		       struct wm8350_platform_data *pdata);
-void wm8350_device_exit(struct wm8350 *wm8350);
-
-/*
- * WM8350 device IO
- */
-int wm8350_clear_bits(struct wm8350 *wm8350, u16 reg, u16 mask);
-int wm8350_set_bits(struct wm8350 *wm8350, u16 reg, u16 mask);
-u16 wm8350_reg_read(struct wm8350 *wm8350, int reg);
-int wm8350_reg_write(struct wm8350 *wm8350, int reg, u16 val);
-int wm8350_reg_lock(struct wm8350 *wm8350);
-int wm8350_reg_unlock(struct wm8350 *wm8350);
-int wm8350_block_read(struct wm8350 *wm8350, int reg, int size, u16 *dest);
-int wm8350_block_write(struct wm8350 *wm8350, int reg, int size, u16 *src);
-
-/*
- * WM8350 internal interrupts
- */
-static inline int wm8350_register_irq(struct wm8350 *wm8350, int irq,
-				      irq_handler_t handler,
-				      unsigned long flags,
-				      const char *name, void *data)
-{
-	if (!wm8350->irq_base)
-		return -ENODEV;
-
-	return request_threaded_irq(irq + wm8350->irq_base, NULL,
-				    handler, flags, name, data);
-}
-
-static inline void wm8350_free_irq(struct wm8350 *wm8350, int irq, void *data)
-{
-	free_irq(irq + wm8350->irq_base, data);
-}
-
-static inline void wm8350_mask_irq(struct wm8350 *wm8350, int irq)
-{
-	disable_irq(irq + wm8350->irq_base);
-}
-
-static inline void wm8350_unmask_irq(struct wm8350 *wm8350, int irq)
-{
-	enable_irq(irq + wm8350->irq_base);
-}
-
-int wm8350_irq_init(struct wm8350 *wm8350, int irq,
-		    struct wm8350_platform_data *pdata);
-int wm8350_irq_exit(struct wm8350 *wm8350);
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/mfd/wm8350/gpio.h b/ANDROID_3.4.5/include/linux/mfd/wm8350/gpio.h
deleted file mode 100644
index d657bcd6..00000000
--- a/ANDROID_3.4.5/include/linux/mfd/wm8350/gpio.h
+++ /dev/null
@@ -1,361 +0,0 @@
-/*
- * gpio.h  --  GPIO Driver for Wolfson WM8350 PMIC
- *
- * Copyright 2007 Wolfson Microelectronics PLC
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- */
-
-#ifndef __LINUX_MFD_WM8350_GPIO_H_
-#define __LINUX_MFD_WM8350_GPIO_H_
-
-#include <linux/platform_device.h>
-
-/*
- * GPIO Registers.
- */
-#define WM8350_GPIO_DEBOUNCE                    0x80
-#define WM8350_GPIO_PIN_PULL_UP_CONTROL         0x81
-#define WM8350_GPIO_PULL_DOWN_CONTROL           0x82
-#define WM8350_GPIO_INT_MODE                    0x83
-#define WM8350_GPIO_CONTROL                     0x85
-#define WM8350_GPIO_CONFIGURATION_I_O           0x86
-#define WM8350_GPIO_PIN_POLARITY_TYPE           0x87
-#define WM8350_GPIO_FUNCTION_SELECT_1           0x8C
-#define WM8350_GPIO_FUNCTION_SELECT_2           0x8D
-#define WM8350_GPIO_FUNCTION_SELECT_3           0x8E
-#define WM8350_GPIO_FUNCTION_SELECT_4           0x8F
-#define WM8350_GPIO_LEVEL			0xE6
-
-/*
- * GPIO Functions
- */
-#define WM8350_GPIO0_GPIO_IN			0x0
-#define WM8350_GPIO0_GPIO_OUT			0x0
-#define WM8350_GPIO0_PWR_ON_IN			0x1
-#define WM8350_GPIO0_PWR_ON_OUT			0x1
-#define WM8350_GPIO0_LDO_EN_IN			0x2
-#define WM8350_GPIO0_VRTC_OUT			0x2
-#define WM8350_GPIO0_LPWR1_IN			0x3
-#define WM8350_GPIO0_POR_B_OUT			0x3
-
-#define WM8350_GPIO1_GPIO_IN			0x0
-#define WM8350_GPIO1_GPIO_OUT			0x0
-#define WM8350_GPIO1_PWR_ON_IN			0x1
-#define WM8350_GPIO1_DO_CONF_OUT		0x1
-#define WM8350_GPIO1_LDO_EN_IN			0x2
-#define WM8350_GPIO1_RESET_OUT			0x2
-#define WM8350_GPIO1_LPWR2_IN			0x3
-#define WM8350_GPIO1_MEMRST_OUT			0x3
-
-#define WM8350_GPIO2_GPIO_IN			0x0
-#define WM8350_GPIO2_GPIO_OUT			0x0
-#define WM8350_GPIO2_PWR_ON_IN			0x1
-#define WM8350_GPIO2_PWR_ON_OUT			0x1
-#define WM8350_GPIO2_WAKE_UP_IN			0x2
-#define WM8350_GPIO2_VRTC_OUT			0x2
-#define WM8350_GPIO2_32KHZ_IN			0x3
-#define WM8350_GPIO2_32KHZ_OUT			0x3
-
-#define WM8350_GPIO3_GPIO_IN			0x0
-#define WM8350_GPIO3_GPIO_OUT			0x0
-#define WM8350_GPIO3_PWR_ON_IN			0x1
-#define WM8350_GPIO3_P_CLK_OUT			0x1
-#define WM8350_GPIO3_LDO_EN_IN			0x2
-#define WM8350_GPIO3_VRTC_OUT			0x2
-#define WM8350_GPIO3_PWR_OFF_IN			0x3
-#define WM8350_GPIO3_32KHZ_OUT			0x3
-
-#define WM8350_GPIO4_GPIO_IN			0x0
-#define WM8350_GPIO4_GPIO_OUT			0x0
-#define WM8350_GPIO4_MR_IN			0x1
-#define WM8350_GPIO4_MEM_RST_OUT		0x1
-#define WM8350_GPIO4_FLASH_IN			0x2
-#define WM8350_GPIO4_ADA_OUT			0x2
-#define WM8350_GPIO4_HIBERNATE_IN		0x3
-#define WM8350_GPIO4_FLASH_OUT			0x3
-#define WM8350_GPIO4_MICDET_OUT			0x4
-#define WM8350_GPIO4_MICSHT_OUT			0x5
-
-#define WM8350_GPIO5_GPIO_IN			0x0
-#define WM8350_GPIO5_GPIO_OUT			0x0
-#define WM8350_GPIO5_LPWR1_IN			0x1
-#define WM8350_GPIO5_P_CLK_OUT			0x1
-#define WM8350_GPIO5_ADCLRCLK_IN		0x2
-#define WM8350_GPIO5_ADCLRCLK_OUT		0x2
-#define WM8350_GPIO5_HIBERNATE_IN		0x3
-#define WM8350_GPIO5_32KHZ_OUT			0x3
-#define WM8350_GPIO5_MICDET_OUT			0x4
-#define WM8350_GPIO5_MICSHT_OUT			0x5
-#define WM8350_GPIO5_ADA_OUT			0x6
-#define WM8350_GPIO5_OPCLK_OUT			0x7
-
-#define WM8350_GPIO6_GPIO_IN			0x0
-#define WM8350_GPIO6_GPIO_OUT			0x0
-#define WM8350_GPIO6_LPWR2_IN			0x1
-#define WM8350_GPIO6_MEMRST_OUT			0x1
-#define WM8350_GPIO6_FLASH_IN			0x2
-#define WM8350_GPIO6_ADA_OUT			0x2
-#define WM8350_GPIO6_HIBERNATE_IN		0x3
-#define WM8350_GPIO6_RTC_OUT			0x3
-#define WM8350_GPIO6_MICDET_OUT			0x4
-#define WM8350_GPIO6_MICSHT_OUT			0x5
-#define WM8350_GPIO6_ADCLRCLKB_OUT		0x6
-#define WM8350_GPIO6_SDOUT_OUT			0x7
-
-#define WM8350_GPIO7_GPIO_IN			0x0
-#define WM8350_GPIO7_GPIO_OUT			0x0
-#define WM8350_GPIO7_LPWR3_IN			0x1
-#define WM8350_GPIO7_P_CLK_OUT			0x1
-#define WM8350_GPIO7_MASK_IN			0x2
-#define WM8350_GPIO7_VCC_FAULT_OUT		0x2
-#define WM8350_GPIO7_HIBERNATE_IN		0x3
-#define WM8350_GPIO7_BATT_FAULT_OUT		0x3
-#define WM8350_GPIO7_MICDET_OUT			0x4
-#define WM8350_GPIO7_MICSHT_OUT			0x5
-#define WM8350_GPIO7_ADA_OUT			0x6
-#define WM8350_GPIO7_CSB_IN			0x7
-
-#define WM8350_GPIO8_GPIO_IN			0x0
-#define WM8350_GPIO8_GPIO_OUT			0x0
-#define WM8350_GPIO8_MR_IN			0x1
-#define WM8350_GPIO8_VCC_FAULT_OUT		0x1
-#define WM8350_GPIO8_ADCBCLK_IN			0x2
-#define WM8350_GPIO8_ADCBCLK_OUT		0x2
-#define WM8350_GPIO8_PWR_OFF_IN			0x3
-#define WM8350_GPIO8_BATT_FAULT_OUT		0x3
-#define WM8350_GPIO8_ALTSCL_IN			0xf
-
-#define WM8350_GPIO9_GPIO_IN			0x0
-#define WM8350_GPIO9_GPIO_OUT			0x0
-#define WM8350_GPIO9_HEARTBEAT_IN		0x1
-#define WM8350_GPIO9_VCC_FAULT_OUT		0x1
-#define WM8350_GPIO9_MASK_IN			0x2
-#define WM8350_GPIO9_LINE_GT_BATT_OUT		0x2
-#define WM8350_GPIO9_PWR_OFF_IN			0x3
-#define WM8350_GPIO9_BATT_FAULT_OUT		0x3
-#define WM8350_GPIO9_ALTSDA_OUT			0xf
-
-#define WM8350_GPIO10_GPIO_IN			0x0
-#define WM8350_GPIO10_GPIO_OUT			0x0
-#define WM8350_GPIO10_ISINKC_OUT		0x1
-#define WM8350_GPIO10_PWR_OFF_IN		0x2
-#define WM8350_GPIO10_LINE_GT_BATT_OUT		0x2
-#define WM8350_GPIO10_CHD_IND_IN		0x3
-
-#define WM8350_GPIO11_GPIO_IN			0x0
-#define WM8350_GPIO11_GPIO_OUT			0x0
-#define WM8350_GPIO11_ISINKD_OUT		0x1
-#define WM8350_GPIO11_WAKEUP_IN			0x2
-#define WM8350_GPIO11_LINE_GT_BATT_OUT		0x2
-#define WM8350_GPIO11_CHD_IND_IN		0x3
-
-#define WM8350_GPIO12_GPIO_IN			0x0
-#define WM8350_GPIO12_GPIO_OUT			0x0
-#define WM8350_GPIO12_ISINKE_OUT		0x1
-#define WM8350_GPIO12_LINE_GT_BATT_OUT		0x2
-#define WM8350_GPIO12_LINE_EN_OUT		0x3
-#define WM8350_GPIO12_32KHZ_OUT			0x4
-
-#define WM8350_GPIO_DIR_IN			0
-#define WM8350_GPIO_DIR_OUT			1
-#define WM8350_GPIO_ACTIVE_LOW			0
-#define WM8350_GPIO_ACTIVE_HIGH			1
-#define WM8350_GPIO_PULL_NONE			0
-#define WM8350_GPIO_PULL_UP			1
-#define WM8350_GPIO_PULL_DOWN			2
-#define WM8350_GPIO_INVERT_OFF			0
-#define WM8350_GPIO_INVERT_ON			1
-#define WM8350_GPIO_DEBOUNCE_OFF		0
-#define WM8350_GPIO_DEBOUNCE_ON			1
-
-/*
- * R30 (0x1E) - GPIO Interrupt Status
- */
-#define WM8350_GP12_EINT                        0x1000
-#define WM8350_GP11_EINT                        0x0800
-#define WM8350_GP10_EINT                        0x0400
-#define WM8350_GP9_EINT                         0x0200
-#define WM8350_GP8_EINT                         0x0100
-#define WM8350_GP7_EINT                         0x0080
-#define WM8350_GP6_EINT                         0x0040
-#define WM8350_GP5_EINT                         0x0020
-#define WM8350_GP4_EINT                         0x0010
-#define WM8350_GP3_EINT                         0x0008
-#define WM8350_GP2_EINT                         0x0004
-#define WM8350_GP1_EINT                         0x0002
-#define WM8350_GP0_EINT                         0x0001
-
-
-/*
- * R128 (0x80) - GPIO Debounce
- */
-#define WM8350_GP12_DB                          0x1000
-#define WM8350_GP11_DB                          0x0800
-#define WM8350_GP10_DB                          0x0400
-#define WM8350_GP9_DB                           0x0200
-#define WM8350_GP8_DB                           0x0100
-#define WM8350_GP7_DB                           0x0080
-#define WM8350_GP6_DB                           0x0040
-#define WM8350_GP5_DB                           0x0020
-#define WM8350_GP4_DB                           0x0010
-#define WM8350_GP3_DB                           0x0008
-#define WM8350_GP2_DB                           0x0004
-#define WM8350_GP1_DB                           0x0002
-#define WM8350_GP0_DB                           0x0001
-
-/*
- * R129 (0x81) - GPIO Pin pull up Control
- */
-#define WM8350_GP12_PU                          0x1000
-#define WM8350_GP11_PU                          0x0800
-#define WM8350_GP10_PU                          0x0400
-#define WM8350_GP9_PU                           0x0200
-#define WM8350_GP8_PU                           0x0100
-#define WM8350_GP7_PU                           0x0080
-#define WM8350_GP6_PU                           0x0040
-#define WM8350_GP5_PU                           0x0020
-#define WM8350_GP4_PU                           0x0010
-#define WM8350_GP3_PU                           0x0008
-#define WM8350_GP2_PU                           0x0004
-#define WM8350_GP1_PU                           0x0002
-#define WM8350_GP0_PU                           0x0001
-
-/*
- * R130 (0x82) - GPIO Pull down Control
- */
-#define WM8350_GP12_PD                          0x1000
-#define WM8350_GP11_PD                          0x0800
-#define WM8350_GP10_PD                          0x0400
-#define WM8350_GP9_PD                           0x0200
-#define WM8350_GP8_PD                           0x0100
-#define WM8350_GP7_PD                           0x0080
-#define WM8350_GP6_PD                           0x0040
-#define WM8350_GP5_PD                           0x0020
-#define WM8350_GP4_PD                           0x0010
-#define WM8350_GP3_PD                           0x0008
-#define WM8350_GP2_PD                           0x0004
-#define WM8350_GP1_PD                           0x0002
-#define WM8350_GP0_PD                           0x0001
-
-/*
- * R131 (0x83) - GPIO Interrupt Mode
- */
-#define WM8350_GP12_INTMODE                     0x1000
-#define WM8350_GP11_INTMODE                     0x0800
-#define WM8350_GP10_INTMODE                     0x0400
-#define WM8350_GP9_INTMODE                      0x0200
-#define WM8350_GP8_INTMODE                      0x0100
-#define WM8350_GP7_INTMODE                      0x0080
-#define WM8350_GP6_INTMODE                      0x0040
-#define WM8350_GP5_INTMODE                      0x0020
-#define WM8350_GP4_INTMODE                      0x0010
-#define WM8350_GP3_INTMODE                      0x0008
-#define WM8350_GP2_INTMODE                      0x0004
-#define WM8350_GP1_INTMODE                      0x0002
-#define WM8350_GP0_INTMODE                      0x0001
-
-/*
- * R133 (0x85) - GPIO Control
- */
-#define WM8350_GP_DBTIME_MASK                   0x00C0
-
-/*
- * R134 (0x86) - GPIO Configuration (i/o)
- */
-#define WM8350_GP12_DIR                         0x1000
-#define WM8350_GP11_DIR                         0x0800
-#define WM8350_GP10_DIR                         0x0400
-#define WM8350_GP9_DIR                          0x0200
-#define WM8350_GP8_DIR                          0x0100
-#define WM8350_GP7_DIR                          0x0080
-#define WM8350_GP6_DIR                          0x0040
-#define WM8350_GP5_DIR                          0x0020
-#define WM8350_GP4_DIR                          0x0010
-#define WM8350_GP3_DIR                          0x0008
-#define WM8350_GP2_DIR                          0x0004
-#define WM8350_GP1_DIR                          0x0002
-#define WM8350_GP0_DIR                          0x0001
-
-/*
- * R135 (0x87) - GPIO Pin Polarity / Type
- */
-#define WM8350_GP12_CFG                         0x1000
-#define WM8350_GP11_CFG                         0x0800
-#define WM8350_GP10_CFG                         0x0400
-#define WM8350_GP9_CFG                          0x0200
-#define WM8350_GP8_CFG                          0x0100
-#define WM8350_GP7_CFG                          0x0080
-#define WM8350_GP6_CFG                          0x0040
-#define WM8350_GP5_CFG                          0x0020
-#define WM8350_GP4_CFG                          0x0010
-#define WM8350_GP3_CFG                          0x0008
-#define WM8350_GP2_CFG                          0x0004
-#define WM8350_GP1_CFG                          0x0002
-#define WM8350_GP0_CFG                          0x0001
-
-/*
- * R140 (0x8C) - GPIO Function Select 1
- */
-#define WM8350_GP3_FN_MASK                      0xF000
-#define WM8350_GP2_FN_MASK                      0x0F00
-#define WM8350_GP1_FN_MASK                      0x00F0
-#define WM8350_GP0_FN_MASK                      0x000F
-
-/*
- * R141 (0x8D) - GPIO Function Select 2
- */
-#define WM8350_GP7_FN_MASK                      0xF000
-#define WM8350_GP6_FN_MASK                      0x0F00
-#define WM8350_GP5_FN_MASK                      0x00F0
-#define WM8350_GP4_FN_MASK                      0x000F
-
-/*
- * R142 (0x8E) - GPIO Function Select 3
- */
-#define WM8350_GP11_FN_MASK                     0xF000
-#define WM8350_GP10_FN_MASK                     0x0F00
-#define WM8350_GP9_FN_MASK                      0x00F0
-#define WM8350_GP8_FN_MASK                      0x000F
-
-/*
- * R143 (0x8F) - GPIO Function Select 4
- */
-#define WM8350_GP12_FN_MASK                     0x000F
-
-/*
- * R230 (0xE6) - GPIO Pin Status
- */
-#define WM8350_GP12_LVL                         0x1000
-#define WM8350_GP11_LVL                         0x0800
-#define WM8350_GP10_LVL                         0x0400
-#define WM8350_GP9_LVL                          0x0200
-#define WM8350_GP8_LVL                          0x0100
-#define WM8350_GP7_LVL                          0x0080
-#define WM8350_GP6_LVL                          0x0040
-#define WM8350_GP5_LVL                          0x0020
-#define WM8350_GP4_LVL                          0x0010
-#define WM8350_GP3_LVL                          0x0008
-#define WM8350_GP2_LVL                          0x0004
-#define WM8350_GP1_LVL                          0x0002
-#define WM8350_GP0_LVL                          0x0001
-
-struct wm8350;
-
-int wm8350_gpio_config(struct wm8350 *wm8350, int gpio, int dir, int func,
-		       int pol, int pull, int invert, int debounce);
-
-struct wm8350_gpio {
-	struct platform_device *pdev;
-};
-
-/*
- * GPIO Interrupts
- */
-#define WM8350_IRQ_GPIO(x)                      (50 + x)
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/mfd/wm8350/pmic.h b/ANDROID_3.4.5/include/linux/mfd/wm8350/pmic.h
deleted file mode 100644
index 579b50ca..00000000
--- a/ANDROID_3.4.5/include/linux/mfd/wm8350/pmic.h
+++ /dev/null
@@ -1,781 +0,0 @@
-/*
- * pmic.h  --  Power Management Driver for Wolfson WM8350 PMIC
- *
- * Copyright 2007 Wolfson Microelectronics PLC
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- */
-
-#ifndef __LINUX_MFD_WM8350_PMIC_H
-#define __LINUX_MFD_WM8350_PMIC_H
-
-#include <linux/platform_device.h>
-#include <linux/leds.h>
-#include <linux/regulator/machine.h>
-
-/*
- * Register values.
- */
-
-#define WM8350_CURRENT_SINK_DRIVER_A            0xAC
-#define WM8350_CSA_FLASH_CONTROL                0xAD
-#define WM8350_CURRENT_SINK_DRIVER_B            0xAE
-#define WM8350_CSB_FLASH_CONTROL                0xAF
-#define WM8350_DCDC_LDO_REQUESTED               0xB0
-#define WM8350_DCDC_ACTIVE_OPTIONS              0xB1
-#define WM8350_DCDC_SLEEP_OPTIONS               0xB2
-#define WM8350_POWER_CHECK_COMPARATOR           0xB3
-#define WM8350_DCDC1_CONTROL                    0xB4
-#define WM8350_DCDC1_TIMEOUTS                   0xB5
-#define WM8350_DCDC1_LOW_POWER                  0xB6
-#define WM8350_DCDC2_CONTROL                    0xB7
-#define WM8350_DCDC2_TIMEOUTS                   0xB8
-#define WM8350_DCDC3_CONTROL                    0xBA
-#define WM8350_DCDC3_TIMEOUTS                   0xBB
-#define WM8350_DCDC3_LOW_POWER                  0xBC
-#define WM8350_DCDC4_CONTROL                    0xBD
-#define WM8350_DCDC4_TIMEOUTS                   0xBE
-#define WM8350_DCDC4_LOW_POWER                  0xBF
-#define WM8350_DCDC5_CONTROL                    0xC0
-#define WM8350_DCDC5_TIMEOUTS                   0xC1
-#define WM8350_DCDC6_CONTROL                    0xC3
-#define WM8350_DCDC6_TIMEOUTS                   0xC4
-#define WM8350_DCDC6_LOW_POWER                  0xC5
-#define WM8350_LIMIT_SWITCH_CONTROL             0xC7
-#define WM8350_LDO1_CONTROL                     0xC8
-#define WM8350_LDO1_TIMEOUTS                    0xC9
-#define WM8350_LDO1_LOW_POWER                   0xCA
-#define WM8350_LDO2_CONTROL                     0xCB
-#define WM8350_LDO2_TIMEOUTS                    0xCC
-#define WM8350_LDO2_LOW_POWER                   0xCD
-#define WM8350_LDO3_CONTROL                     0xCE
-#define WM8350_LDO3_TIMEOUTS                    0xCF
-#define WM8350_LDO3_LOW_POWER                   0xD0
-#define WM8350_LDO4_CONTROL                     0xD1
-#define WM8350_LDO4_TIMEOUTS                    0xD2
-#define WM8350_LDO4_LOW_POWER                   0xD3
-#define WM8350_VCC_FAULT_MASKS                  0xD7
-#define WM8350_MAIN_BANDGAP_CONTROL             0xD8
-#define WM8350_OSC_CONTROL                      0xD9
-#define WM8350_RTC_TICK_CONTROL                 0xDA
-#define WM8350_SECURITY                         0xDB
-#define WM8350_RAM_BIST_1                       0xDC
-#define WM8350_DCDC_LDO_STATUS                  0xE1
-#define WM8350_GPIO_PIN_STATUS                  0xE6
-
-#define WM8350_DCDC1_FORCE_PWM                  0xF8
-#define WM8350_DCDC3_FORCE_PWM                  0xFA
-#define WM8350_DCDC4_FORCE_PWM                  0xFB
-#define WM8350_DCDC6_FORCE_PWM                  0xFD
-
-/*
- * R172 (0xAC) - Current Sink Driver A
- */
-#define WM8350_CS1_HIB_MODE                     0x1000
-#define WM8350_CS1_HIB_MODE_MASK                0x1000
-#define WM8350_CS1_HIB_MODE_SHIFT                   12
-#define WM8350_CS1_ISEL_MASK                    0x003F
-#define WM8350_CS1_ISEL_SHIFT                        0
-
-/* Bit values for R172 (0xAC) */
-#define WM8350_CS1_HIB_MODE_DISABLE                  0
-#define WM8350_CS1_HIB_MODE_LEAVE                    1
-
-#define WM8350_CS1_ISEL_220M                      0x3F
-
-/*
- * R173 (0xAD) - CSA Flash control
- */
-#define WM8350_CS1_FLASH_MODE                   0x8000
-#define WM8350_CS1_TRIGSRC                      0x4000
-#define WM8350_CS1_DRIVE                        0x2000
-#define WM8350_CS1_FLASH_DUR_MASK               0x0300
-#define WM8350_CS1_OFF_RAMP_MASK                0x0030
-#define WM8350_CS1_ON_RAMP_MASK                 0x0003
-
-/*
- * R174 (0xAE) - Current Sink Driver B
- */
-#define WM8350_CS2_HIB_MODE                     0x1000
-#define WM8350_CS2_ISEL_MASK                    0x003F
-
-/*
- * R175 (0xAF) - CSB Flash control
- */
-#define WM8350_CS2_FLASH_MODE                   0x8000
-#define WM8350_CS2_TRIGSRC                      0x4000
-#define WM8350_CS2_DRIVE                        0x2000
-#define WM8350_CS2_FLASH_DUR_MASK               0x0300
-#define WM8350_CS2_OFF_RAMP_MASK                0x0030
-#define WM8350_CS2_ON_RAMP_MASK                 0x0003
-
-/*
- * R176 (0xB0) - DCDC/LDO requested
- */
-#define WM8350_LS_ENA                           0x8000
-#define WM8350_LDO4_ENA                         0x0800
-#define WM8350_LDO3_ENA                         0x0400
-#define WM8350_LDO2_ENA                         0x0200
-#define WM8350_LDO1_ENA                         0x0100
-#define WM8350_DC6_ENA                          0x0020
-#define WM8350_DC5_ENA                          0x0010
-#define WM8350_DC4_ENA                          0x0008
-#define WM8350_DC3_ENA                          0x0004
-#define WM8350_DC2_ENA                          0x0002
-#define WM8350_DC1_ENA                          0x0001
-
-/*
- * R177 (0xB1) - DCDC Active options
- */
-#define WM8350_PUTO_MASK                        0x3000
-#define WM8350_PWRUP_DELAY_MASK                 0x0300
-#define WM8350_DC6_ACTIVE                       0x0020
-#define WM8350_DC4_ACTIVE                       0x0008
-#define WM8350_DC3_ACTIVE                       0x0004
-#define WM8350_DC1_ACTIVE                       0x0001
-
-/*
- * R178 (0xB2) - DCDC Sleep options
- */
-#define WM8350_DC6_SLEEP                        0x0020
-#define WM8350_DC4_SLEEP                        0x0008
-#define WM8350_DC3_SLEEP                        0x0004
-#define WM8350_DC1_SLEEP                        0x0001
-
-/*
- * R179 (0xB3) - Power-check comparator
- */
-#define WM8350_PCCMP_ERRACT                     0x4000
-#define WM8350_PCCMP_RAIL                       0x0100
-#define WM8350_PCCMP_OFF_THR_MASK               0x0070
-#define WM8350_PCCMP_ON_THR_MASK                0x0007
-
-/*
- * R180 (0xB4) - DCDC1 Control
- */
-#define WM8350_DC1_OPFLT                        0x0400
-#define WM8350_DC1_VSEL_MASK                    0x007F
-#define WM8350_DC1_VSEL_SHIFT                        0
-
-/*
- * R181 (0xB5) - DCDC1 Timeouts
- */
-#define WM8350_DC1_ERRACT_MASK                  0xC000
-#define WM8350_DC1_ERRACT_SHIFT                     14
-#define WM8350_DC1_ENSLOT_MASK                  0x3C00
-#define WM8350_DC1_ENSLOT_SHIFT                     10
-#define WM8350_DC1_SDSLOT_MASK                  0x03C0
-#define WM8350_DC1_UVTO_MASK                    0x0030
-#define WM8350_DC1_SDSLOT_SHIFT                      6
-
-/* Bit values for R181 (0xB5) */
-#define WM8350_DC1_ERRACT_NONE                       0
-#define WM8350_DC1_ERRACT_SHUTDOWN_CONV              1
-#define WM8350_DC1_ERRACT_SHUTDOWN_SYS               2
-
-/*
- * R182 (0xB6) - DCDC1 Low Power
- */
-#define WM8350_DC1_HIB_MODE_MASK                0x7000
-#define WM8350_DC1_HIB_TRIG_MASK                0x0300
-#define WM8350_DC1_VIMG_MASK                    0x007F
-
-/*
- * R183 (0xB7) - DCDC2 Control
- */
-#define WM8350_DC2_MODE                         0x4000
-#define WM8350_DC2_MODE_MASK                    0x4000
-#define WM8350_DC2_MODE_SHIFT                       14
-#define WM8350_DC2_HIB_MODE                     0x1000
-#define WM8350_DC2_HIB_MODE_MASK                0x1000
-#define WM8350_DC2_HIB_MODE_SHIFT                   12
-#define WM8350_DC2_HIB_TRIG_MASK                0x0300
-#define WM8350_DC2_HIB_TRIG_SHIFT                    8
-#define WM8350_DC2_ILIM                         0x0040
-#define WM8350_DC2_ILIM_MASK                    0x0040
-#define WM8350_DC2_ILIM_SHIFT                        6
-#define WM8350_DC2_RMP_MASK                     0x0018
-#define WM8350_DC2_RMP_SHIFT                         3
-#define WM8350_DC2_FBSRC_MASK                   0x0003
-#define WM8350_DC2_FBSRC_SHIFT                       0
-
-/* Bit values for R183 (0xB7) */
-#define WM8350_DC2_MODE_BOOST                        0
-#define WM8350_DC2_MODE_SWITCH                       1
-
-#define WM8350_DC2_HIB_MODE_ACTIVE                   1
-#define WM8350_DC2_HIB_MODE_DISABLE                  0
-
-#define WM8350_DC2_HIB_TRIG_NONE                     0
-#define WM8350_DC2_HIB_TRIG_LPWR1                    1
-#define WM8350_DC2_HIB_TRIG_LPWR2                    2
-#define WM8350_DC2_HIB_TRIG_LPWR3                    3
-
-#define WM8350_DC2_ILIM_HIGH                         0
-#define WM8350_DC2_ILIM_LOW                          1
-
-#define WM8350_DC2_RMP_30V                           0
-#define WM8350_DC2_RMP_20V                           1
-#define WM8350_DC2_RMP_10V                           2
-#define WM8350_DC2_RMP_5V                            3
-
-#define WM8350_DC2_FBSRC_FB2                         0
-#define WM8350_DC2_FBSRC_ISINKA                      1
-#define WM8350_DC2_FBSRC_ISINKB                      2
-#define WM8350_DC2_FBSRC_USB                         3
-
-/*
- * R184 (0xB8) - DCDC2 Timeouts
- */
-#define WM8350_DC2_ERRACT_MASK                  0xC000
-#define WM8350_DC2_ERRACT_SHIFT                     14
-#define WM8350_DC2_ENSLOT_MASK                  0x3C00
-#define WM8350_DC2_ENSLOT_SHIFT                     10
-#define WM8350_DC2_SDSLOT_MASK                  0x03C0
-#define WM8350_DC2_UVTO_MASK                    0x0030
-
-/* Bit values for R184 (0xB8) */
-#define WM8350_DC2_ERRACT_NONE                       0
-#define WM8350_DC2_ERRACT_SHUTDOWN_CONV              1
-#define WM8350_DC2_ERRACT_SHUTDOWN_SYS               2
-
-/*
- * R186 (0xBA) - DCDC3 Control
- */
-#define WM8350_DC3_OPFLT                        0x0400
-#define WM8350_DC3_VSEL_MASK                    0x007F
-#define WM8350_DC3_VSEL_SHIFT                        0
-
-/*
- * R187 (0xBB) - DCDC3 Timeouts
- */
-#define WM8350_DC3_ERRACT_MASK                  0xC000
-#define WM8350_DC3_ERRACT_SHIFT                     14
-#define WM8350_DC3_ENSLOT_MASK                  0x3C00
-#define WM8350_DC3_ENSLOT_SHIFT                     10
-#define WM8350_DC3_SDSLOT_MASK                  0x03C0
-#define WM8350_DC3_UVTO_MASK                    0x0030
-#define WM8350_DC3_SDSLOT_SHIFT                      6
-
-/* Bit values for R187 (0xBB) */
-#define WM8350_DC3_ERRACT_NONE                       0
-#define WM8350_DC3_ERRACT_SHUTDOWN_CONV              1
-#define WM8350_DC3_ERRACT_SHUTDOWN_SYS               2
-/*
- * R188 (0xBC) - DCDC3 Low Power
- */
-#define WM8350_DC3_HIB_MODE_MASK                0x7000
-#define WM8350_DC3_HIB_TRIG_MASK                0x0300
-#define WM8350_DC3_VIMG_MASK                    0x007F
-
-/*
- * R189 (0xBD) - DCDC4 Control
- */
-#define WM8350_DC4_OPFLT                        0x0400
-#define WM8350_DC4_VSEL_MASK                    0x007F
-#define WM8350_DC4_VSEL_SHIFT                        0
-
-/*
- * R190 (0xBE) - DCDC4 Timeouts
- */
-#define WM8350_DC4_ERRACT_MASK                  0xC000
-#define WM8350_DC4_ERRACT_SHIFT                     14
-#define WM8350_DC4_ENSLOT_MASK                  0x3C00
-#define WM8350_DC4_ENSLOT_SHIFT                     10
-#define WM8350_DC4_SDSLOT_MASK                  0x03C0
-#define WM8350_DC4_UVTO_MASK                    0x0030
-#define WM8350_DC4_SDSLOT_SHIFT                      6
-
-/* Bit values for R190 (0xBE) */
-#define WM8350_DC4_ERRACT_NONE                       0
-#define WM8350_DC4_ERRACT_SHUTDOWN_CONV              1
-#define WM8350_DC4_ERRACT_SHUTDOWN_SYS               2
-
-/*
- * R191 (0xBF) - DCDC4 Low Power
- */
-#define WM8350_DC4_HIB_MODE_MASK                0x7000
-#define WM8350_DC4_HIB_TRIG_MASK                0x0300
-#define WM8350_DC4_VIMG_MASK                    0x007F
-
-/*
- * R192 (0xC0) - DCDC5 Control
- */
-#define WM8350_DC5_MODE                         0x4000
-#define WM8350_DC5_MODE_MASK                    0x4000
-#define WM8350_DC5_MODE_SHIFT                       14
-#define WM8350_DC5_HIB_MODE                     0x1000
-#define WM8350_DC5_HIB_MODE_MASK                0x1000
-#define WM8350_DC5_HIB_MODE_SHIFT                   12
-#define WM8350_DC5_HIB_TRIG_MASK                0x0300
-#define WM8350_DC5_HIB_TRIG_SHIFT                    8
-#define WM8350_DC5_ILIM                         0x0040
-#define WM8350_DC5_ILIM_MASK                    0x0040
-#define WM8350_DC5_ILIM_SHIFT                        6
-#define WM8350_DC5_RMP_MASK                     0x0018
-#define WM8350_DC5_RMP_SHIFT                         3
-#define WM8350_DC5_FBSRC_MASK                   0x0003
-#define WM8350_DC5_FBSRC_SHIFT                       0
-
-/* Bit values for R192 (0xC0) */
-#define WM8350_DC5_MODE_BOOST                        0
-#define WM8350_DC5_MODE_SWITCH                       1
-
-#define WM8350_DC5_HIB_MODE_ACTIVE                   1
-#define WM8350_DC5_HIB_MODE_DISABLE                  0
-
-#define WM8350_DC5_HIB_TRIG_NONE                     0
-#define WM8350_DC5_HIB_TRIG_LPWR1                    1
-#define WM8350_DC5_HIB_TRIG_LPWR2                    2
-#define WM8350_DC5_HIB_TRIG_LPWR3                    3
-
-#define WM8350_DC5_ILIM_HIGH                         0
-#define WM8350_DC5_ILIM_LOW                          1
-
-#define WM8350_DC5_RMP_30V                           0
-#define WM8350_DC5_RMP_20V                           1
-#define WM8350_DC5_RMP_10V                           2
-#define WM8350_DC5_RMP_5V                            3
-
-#define WM8350_DC5_FBSRC_FB2                         0
-#define WM8350_DC5_FBSRC_ISINKA                      1
-#define WM8350_DC5_FBSRC_ISINKB                      2
-#define WM8350_DC5_FBSRC_USB                         3
-
-/*
- * R193 (0xC1) - DCDC5 Timeouts
- */
-#define WM8350_DC5_ERRACT_MASK                  0xC000
-#define WM8350_DC5_ERRACT_SHIFT                     14
-#define WM8350_DC5_ENSLOT_MASK                  0x3C00
-#define WM8350_DC5_ENSLOT_SHIFT                     10
-#define WM8350_DC5_SDSLOT_MASK                  0x03C0
-#define WM8350_DC5_UVTO_MASK                    0x0030
-#define WM8350_DC5_SDSLOT_SHIFT                      6
-
-/* Bit values for R193 (0xC1) */
-#define WM8350_DC5_ERRACT_NONE                       0
-#define WM8350_DC5_ERRACT_SHUTDOWN_CONV              1
-#define WM8350_DC5_ERRACT_SHUTDOWN_SYS               2
-
-/*
- * R195 (0xC3) - DCDC6 Control
- */
-#define WM8350_DC6_OPFLT                        0x0400
-#define WM8350_DC6_VSEL_MASK                    0x007F
-#define WM8350_DC6_VSEL_SHIFT                        0
-
-/*
- * R196 (0xC4) - DCDC6 Timeouts
- */
-#define WM8350_DC6_ERRACT_MASK                  0xC000
-#define WM8350_DC6_ERRACT_SHIFT                     14
-#define WM8350_DC6_ENSLOT_MASK                  0x3C00
-#define WM8350_DC6_ENSLOT_SHIFT                     10
-#define WM8350_DC6_SDSLOT_MASK                  0x03C0
-#define WM8350_DC6_UVTO_MASK                    0x0030
-#define WM8350_DC6_SDSLOT_SHIFT                      6
-
-/* Bit values for R196 (0xC4) */
-#define WM8350_DC6_ERRACT_NONE                       0
-#define WM8350_DC6_ERRACT_SHUTDOWN_CONV              1
-#define WM8350_DC6_ERRACT_SHUTDOWN_SYS               2
-
-/*
- * R197 (0xC5) - DCDC6 Low Power
- */
-#define WM8350_DC6_HIB_MODE_MASK                0x7000
-#define WM8350_DC6_HIB_TRIG_MASK                0x0300
-#define WM8350_DC6_VIMG_MASK                    0x007F
-
-/*
- * R199 (0xC7) - Limit Switch Control
- */
-#define WM8350_LS_ERRACT_MASK                   0xC000
-#define WM8350_LS_ERRACT_SHIFT                      14
-#define WM8350_LS_ENSLOT_MASK                   0x3C00
-#define WM8350_LS_ENSLOT_SHIFT                      10
-#define WM8350_LS_SDSLOT_MASK                   0x03C0
-#define WM8350_LS_SDSLOT_SHIFT                       6
-#define WM8350_LS_HIB_MODE                      0x0010
-#define WM8350_LS_HIB_MODE_MASK                 0x0010
-#define WM8350_LS_HIB_MODE_SHIFT                     4
-#define WM8350_LS_HIB_PROT                      0x0002
-#define WM8350_LS_HIB_PROT_MASK                 0x0002
-#define WM8350_LS_HIB_PROT_SHIFT                     1
-#define WM8350_LS_PROT                          0x0001
-#define WM8350_LS_PROT_MASK                     0x0001
-#define WM8350_LS_PROT_SHIFT                         0
-
-/* Bit values for R199 (0xC7) */
-#define WM8350_LS_ERRACT_NONE                       0
-#define WM8350_LS_ERRACT_SHUTDOWN_CONV              1
-#define WM8350_LS_ERRACT_SHUTDOWN_SYS               2
-
-/*
- * R200 (0xC8) - LDO1 Control
- */
-#define WM8350_LDO1_SWI                         0x4000
-#define WM8350_LDO1_OPFLT                       0x0400
-#define WM8350_LDO1_VSEL_MASK                   0x001F
-#define WM8350_LDO1_VSEL_SHIFT                       0
-
-/*
- * R201 (0xC9) - LDO1 Timeouts
- */
-#define WM8350_LDO1_ERRACT_MASK                 0xC000
-#define WM8350_LDO1_ERRACT_SHIFT                    14
-#define WM8350_LDO1_ENSLOT_MASK                 0x3C00
-#define WM8350_LDO1_ENSLOT_SHIFT                    10
-#define WM8350_LDO1_SDSLOT_MASK                 0x03C0
-#define WM8350_LDO1_UVTO_MASK                   0x0030
-#define WM8350_LDO1_SDSLOT_SHIFT                     6
-
-/* Bit values for R201 (0xC9) */
-#define WM8350_LDO1_ERRACT_NONE                       0
-#define WM8350_LDO1_ERRACT_SHUTDOWN_CONV              1
-#define WM8350_LDO1_ERRACT_SHUTDOWN_SYS               2
-
-/*
- * R202 (0xCA) - LDO1 Low Power
- */
-#define WM8350_LDO1_HIB_MODE_MASK               0x3000
-#define WM8350_LDO1_HIB_TRIG_MASK               0x0300
-#define WM8350_LDO1_VIMG_MASK                   0x001F
-#define WM8350_LDO1_HIB_MODE_DIS		(0x1 << 12)
-
-
-/*
- * R203 (0xCB) - LDO2 Control
- */
-#define WM8350_LDO2_SWI                         0x4000
-#define WM8350_LDO2_OPFLT                       0x0400
-#define WM8350_LDO2_VSEL_MASK                   0x001F
-#define WM8350_LDO2_VSEL_SHIFT                       0
-
-/*
- * R204 (0xCC) - LDO2 Timeouts
- */
-#define WM8350_LDO2_ERRACT_MASK                 0xC000
-#define WM8350_LDO2_ERRACT_SHIFT                    14
-#define WM8350_LDO2_ENSLOT_MASK                 0x3C00
-#define WM8350_LDO2_ENSLOT_SHIFT                    10
-#define WM8350_LDO2_SDSLOT_MASK                 0x03C0
-#define WM8350_LDO2_SDSLOT_SHIFT                     6
-
-/* Bit values for R204 (0xCC) */
-#define WM8350_LDO2_ERRACT_NONE                       0
-#define WM8350_LDO2_ERRACT_SHUTDOWN_CONV              1
-#define WM8350_LDO2_ERRACT_SHUTDOWN_SYS               2
-
-/*
- * R205 (0xCD) - LDO2 Low Power
- */
-#define WM8350_LDO2_HIB_MODE_MASK               0x3000
-#define WM8350_LDO2_HIB_TRIG_MASK               0x0300
-#define WM8350_LDO2_VIMG_MASK                   0x001F
-
-/*
- * R206 (0xCE) - LDO3 Control
- */
-#define WM8350_LDO3_SWI                         0x4000
-#define WM8350_LDO3_OPFLT                       0x0400
-#define WM8350_LDO3_VSEL_MASK                   0x001F
-#define WM8350_LDO3_VSEL_SHIFT                       0
-
-/*
- * R207 (0xCF) - LDO3 Timeouts
- */
-#define WM8350_LDO3_ERRACT_MASK                 0xC000
-#define WM8350_LDO3_ERRACT_SHIFT                    14
-#define WM8350_LDO3_ENSLOT_MASK                 0x3C00
-#define WM8350_LDO3_ENSLOT_SHIFT                    10
-#define WM8350_LDO3_SDSLOT_MASK                 0x03C0
-#define WM8350_LDO3_UVTO_MASK                   0x0030
-#define WM8350_LDO3_SDSLOT_SHIFT                     6
-
-/* Bit values for R207 (0xCF) */
-#define WM8350_LDO3_ERRACT_NONE                       0
-#define WM8350_LDO3_ERRACT_SHUTDOWN_CONV              1
-#define WM8350_LDO3_ERRACT_SHUTDOWN_SYS               2
-
-/*
- * R208 (0xD0) - LDO3 Low Power
- */
-#define WM8350_LDO3_HIB_MODE_MASK               0x3000
-#define WM8350_LDO3_HIB_TRIG_MASK               0x0300
-#define WM8350_LDO3_VIMG_MASK                   0x001F
-
-/*
- * R209 (0xD1) - LDO4 Control
- */
-#define WM8350_LDO4_SWI                         0x4000
-#define WM8350_LDO4_OPFLT                       0x0400
-#define WM8350_LDO4_VSEL_MASK                   0x001F
-#define WM8350_LDO4_VSEL_SHIFT                       0
-
-/*
- * R210 (0xD2) - LDO4 Timeouts
- */
-#define WM8350_LDO4_ERRACT_MASK                 0xC000
-#define WM8350_LDO4_ERRACT_SHIFT                    14
-#define WM8350_LDO4_ENSLOT_MASK                 0x3C00
-#define WM8350_LDO4_ENSLOT_SHIFT                    10
-#define WM8350_LDO4_SDSLOT_MASK                 0x03C0
-#define WM8350_LDO4_UVTO_MASK                   0x0030
-#define WM8350_LDO4_SDSLOT_SHIFT                     6
-
-/* Bit values for R210 (0xD2) */
-#define WM8350_LDO4_ERRACT_NONE                       0
-#define WM8350_LDO4_ERRACT_SHUTDOWN_CONV              1
-#define WM8350_LDO4_ERRACT_SHUTDOWN_SYS               2
-
-/*
- * R211 (0xD3) - LDO4 Low Power
- */
-#define WM8350_LDO4_HIB_MODE_MASK               0x3000
-#define WM8350_LDO4_HIB_TRIG_MASK               0x0300
-#define WM8350_LDO4_VIMG_MASK                   0x001F
-
-/*
- * R215 (0xD7) - VCC_FAULT Masks
- */
-#define WM8350_LS_FAULT                         0x8000
-#define WM8350_LDO4_FAULT                       0x0800
-#define WM8350_LDO3_FAULT                       0x0400
-#define WM8350_LDO2_FAULT                       0x0200
-#define WM8350_LDO1_FAULT                       0x0100
-#define WM8350_DC6_FAULT                        0x0020
-#define WM8350_DC5_FAULT                        0x0010
-#define WM8350_DC4_FAULT                        0x0008
-#define WM8350_DC3_FAULT                        0x0004
-#define WM8350_DC2_FAULT                        0x0002
-#define WM8350_DC1_FAULT                        0x0001
-
-/*
- * R216 (0xD8) - Main Bandgap Control
- */
-#define WM8350_MBG_LOAD_FUSES                   0x8000
-#define WM8350_MBG_FUSE_WPREP                   0x4000
-#define WM8350_MBG_FUSE_WRITE                   0x2000
-#define WM8350_MBG_FUSE_TRIM_MASK               0x1F00
-#define WM8350_MBG_TRIM_SRC                     0x0020
-#define WM8350_MBG_USER_TRIM_MASK               0x001F
-
-/*
- * R217 (0xD9) - OSC Control
- */
-#define WM8350_OSC_LOAD_FUSES                   0x8000
-#define WM8350_OSC_FUSE_WPREP                   0x4000
-#define WM8350_OSC_FUSE_WRITE                   0x2000
-#define WM8350_OSC_FUSE_TRIM_MASK               0x0F00
-#define WM8350_OSC_TRIM_SRC                     0x0020
-#define WM8350_OSC_USER_TRIM_MASK               0x000F
-
-/*
- * R248 (0xF8) - DCDC1 Force PWM
- */
-#define WM8350_DCDC1_FORCE_PWM_ENA              0x0010
-
-/*
- * R250 (0xFA) - DCDC3 Force PWM
- */
-#define WM8350_DCDC3_FORCE_PWM_ENA              0x0010
-
-/*
- * R251 (0xFB) - DCDC4 Force PWM
- */
-#define WM8350_DCDC4_FORCE_PWM_ENA              0x0010
-
-/*
- * R253 (0xFD) - DCDC1 Force PWM
- */
-#define WM8350_DCDC6_FORCE_PWM_ENA              0x0010
-
-/*
- * DCDC's
- */
-#define WM8350_DCDC_1				0
-#define WM8350_DCDC_2				1
-#define WM8350_DCDC_3				2
-#define WM8350_DCDC_4				3
-#define WM8350_DCDC_5				4
-#define WM8350_DCDC_6				5
-
-/* DCDC modes */
-#define WM8350_DCDC_ACTIVE_STANDBY		0
-#define WM8350_DCDC_ACTIVE_PULSE		1
-#define WM8350_DCDC_SLEEP_NORMAL		0
-#define WM8350_DCDC_SLEEP_LOW			1
-
-/* DCDC Low power (Hibernate) mode */
-#define WM8350_DCDC_HIB_MODE_CUR		(0 << 12)
-#define WM8350_DCDC_HIB_MODE_IMAGE		(1 << 12)
-#define WM8350_DCDC_HIB_MODE_STANDBY		(2 << 12)
-#define WM8350_DCDC_HIB_MODE_LDO		(4 << 12)
-#define WM8350_DCDC_HIB_MODE_LDO_IM		(5 << 12)
-#define WM8350_DCDC_HIB_MODE_DIS		(7 << 12)
-#define WM8350_DCDC_HIB_MODE_MASK		(7 << 12)
-
-/* DCDC Low Power (Hibernate) signal */
-#define WM8350_DCDC_HIB_SIG_REG			(0 << 8)
-#define WM8350_DCDC_HIB_SIG_LPWR1		(1 << 8)
-#define WM8350_DCDC_HIB_SIG_LPWR2		(2 << 8)
-#define WM8350_DCDC_HIB_SIG_LPWR3		(3 << 8)
-
-/* LDO Low power (Hibernate) mode */
-#define WM8350_LDO_HIB_MODE_IMAGE		(0 << 0)
-#define WM8350_LDO_HIB_MODE_DIS			(1 << 0)
-
-/* LDO Low Power (Hibernate) signal */
-#define WM8350_LDO_HIB_SIG_REG			(0 << 8)
-#define WM8350_LDO_HIB_SIG_LPWR1		(1 << 8)
-#define WM8350_LDO_HIB_SIG_LPWR2		(2 << 8)
-#define WM8350_LDO_HIB_SIG_LPWR3		(3 << 8)
-
-/*
- * LDOs
- */
-#define WM8350_LDO_1				6
-#define WM8350_LDO_2				7
-#define WM8350_LDO_3				8
-#define WM8350_LDO_4				9
-
-/*
- * ISINKs
- */
-#define WM8350_ISINK_A				10
-#define WM8350_ISINK_B				11
-
-#define WM8350_ISINK_MODE_BOOST			0
-#define WM8350_ISINK_MODE_SWITCH		1
-#define WM8350_ISINK_ILIM_NORMAL		0
-#define WM8350_ISINK_ILIM_LOW			1
-
-#define WM8350_ISINK_FLASH_DISABLE		0
-#define WM8350_ISINK_FLASH_ENABLE		1
-#define WM8350_ISINK_FLASH_TRIG_BIT		0
-#define WM8350_ISINK_FLASH_TRIG_GPIO		1
-#define WM8350_ISINK_FLASH_MODE_EN		(1 << 13)
-#define WM8350_ISINK_FLASH_MODE_DIS		(0 << 13)
-#define WM8350_ISINK_FLASH_DUR_32MS		(0 << 8)
-#define WM8350_ISINK_FLASH_DUR_64MS		(1 << 8)
-#define WM8350_ISINK_FLASH_DUR_96MS		(2 << 8)
-#define WM8350_ISINK_FLASH_DUR_1024MS		(3 << 8)
-#define WM8350_ISINK_FLASH_ON_INSTANT		(0 << 0)
-#define WM8350_ISINK_FLASH_ON_0_25S		(1 << 0)
-#define WM8350_ISINK_FLASH_ON_0_50S		(2 << 0)
-#define WM8350_ISINK_FLASH_ON_1_00S		(3 << 0)
-#define WM8350_ISINK_FLASH_ON_1_95S		(1 << 0)
-#define WM8350_ISINK_FLASH_ON_3_91S		(2 << 0)
-#define WM8350_ISINK_FLASH_ON_7_80S		(3 << 0)
-#define WM8350_ISINK_FLASH_OFF_INSTANT		(0 << 4)
-#define WM8350_ISINK_FLASH_OFF_0_25S		(1 << 4)
-#define WM8350_ISINK_FLASH_OFF_0_50S		(2 << 4)
-#define WM8350_ISINK_FLASH_OFF_1_00S		(3 << 4)
-#define WM8350_ISINK_FLASH_OFF_1_95S		(1 << 4)
-#define WM8350_ISINK_FLASH_OFF_3_91S		(2 << 4)
-#define WM8350_ISINK_FLASH_OFF_7_80S		(3 << 4)
-
-/*
- * Regulator Interrupts.
- */
-#define WM8350_IRQ_CS1				13
-#define WM8350_IRQ_CS2				14
-#define WM8350_IRQ_UV_LDO4			25
-#define WM8350_IRQ_UV_LDO3			26
-#define WM8350_IRQ_UV_LDO2			27
-#define WM8350_IRQ_UV_LDO1			28
-#define WM8350_IRQ_UV_DC6			29
-#define WM8350_IRQ_UV_DC5			30
-#define WM8350_IRQ_UV_DC4			31
-#define WM8350_IRQ_UV_DC3			32
-#define WM8350_IRQ_UV_DC2			33
-#define WM8350_IRQ_UV_DC1			34
-#define WM8350_IRQ_OC_LS			35
-
-#define NUM_WM8350_REGULATORS			12
-
-struct wm8350;
-struct platform_device;
-struct regulator_init_data;
-
-/*
- * WM8350 LED platform data
- */
-struct wm8350_led_platform_data {
-	const char *name;
-	const char *default_trigger;
-	int max_uA;
-};
-
-struct wm8350_led {
-	struct platform_device *pdev;
-	struct mutex mutex;
-	struct work_struct work;
-	spinlock_t value_lock;
-	enum led_brightness value;
-	struct led_classdev cdev;
-	int max_uA_index;
-	int enabled;
-
-	struct regulator *isink;
-	struct regulator_consumer_supply isink_consumer;
-	struct regulator_init_data isink_init;
-	struct regulator *dcdc;
-	struct regulator_consumer_supply dcdc_consumer;
-	struct regulator_init_data dcdc_init;
-};
-
-struct wm8350_pmic {
-	/* Number of regulators of each type on this device */
-	int max_dcdc;
-	int max_isink;
-
-	/* ISINK to DCDC mapping */
-	int isink_A_dcdc;
-	int isink_B_dcdc;
-
-	/* hibernate configs */
-	u16 dcdc1_hib_mode;
-	u16 dcdc3_hib_mode;
-	u16 dcdc4_hib_mode;
-	u16 dcdc6_hib_mode;
-
-	/* regulator devices */
-	struct platform_device *pdev[NUM_WM8350_REGULATORS];
-
-	/* LED devices */
-	struct wm8350_led led[2];
-};
-
-int wm8350_register_regulator(struct wm8350 *wm8350, int reg,
-			      struct regulator_init_data *initdata);
-int wm8350_register_led(struct wm8350 *wm8350, int lednum, int dcdc, int isink,
-			struct wm8350_led_platform_data *pdata);
-
-/*
- * Additional DCDC control not supported via regulator API
- */
-int wm8350_dcdc_set_slot(struct wm8350 *wm8350, int dcdc, u16 start,
-			 u16 stop, u16 fault);
-int wm8350_dcdc25_set_mode(struct wm8350 *wm8350, int dcdc, u16 mode,
-			   u16 ilim, u16 ramp, u16 feedback);
-
-/*
- * Additional LDO control not supported via regulator API
- */
-int wm8350_ldo_set_slot(struct wm8350 *wm8350, int ldo, u16 start, u16 stop);
-
-/*
- * Additional ISINK control not supported via regulator API
- */
-int wm8350_isink_set_flash(struct wm8350 *wm8350, int isink, u16 mode,
-			   u16 trigger, u16 duration, u16 on_ramp,
-			   u16 off_ramp, u16 drive);
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/mfd/wm8350/rtc.h b/ANDROID_3.4.5/include/linux/mfd/wm8350/rtc.h
deleted file mode 100644
index ebd72ffc..00000000
--- a/ANDROID_3.4.5/include/linux/mfd/wm8350/rtc.h
+++ /dev/null
@@ -1,269 +0,0 @@
-/*
- * rtc.h  --  RTC driver for Wolfson WM8350 PMIC
- *
- * Copyright 2007 Wolfson Microelectronics PLC
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- */
-
-#ifndef __LINUX_MFD_WM8350_RTC_H
-#define __LINUX_MFD_WM8350_RTC_H
-
-#include <linux/platform_device.h>
-
-/*
- * Register values.
- */
-#define WM8350_RTC_SECONDS_MINUTES              0x10
-#define WM8350_RTC_HOURS_DAY                    0x11
-#define WM8350_RTC_DATE_MONTH                   0x12
-#define WM8350_RTC_YEAR                         0x13
-#define WM8350_ALARM_SECONDS_MINUTES            0x14
-#define WM8350_ALARM_HOURS_DAY                  0x15
-#define WM8350_ALARM_DATE_MONTH                 0x16
-#define WM8350_RTC_TIME_CONTROL                 0x17
-
-/*
- * R16 (0x10) - RTC Seconds/Minutes
- */
-#define WM8350_RTC_MINS_MASK                    0x7F00
-#define WM8350_RTC_MINS_SHIFT                        8
-#define WM8350_RTC_SECS_MASK                    0x007F
-#define WM8350_RTC_SECS_SHIFT                        0
-
-/*
- * R17 (0x11) - RTC Hours/Day
- */
-#define WM8350_RTC_DAY_MASK                     0x0700
-#define WM8350_RTC_DAY_SHIFT                         8
-#define WM8350_RTC_HPM_MASK                     0x0020
-#define WM8350_RTC_HPM_SHIFT                         5
-#define WM8350_RTC_HRS_MASK                     0x001F
-#define WM8350_RTC_HRS_SHIFT                         0
-
-/* Bit values for R21 (0x15) */
-#define WM8350_RTC_DAY_SUN                           1
-#define WM8350_RTC_DAY_MON                           2
-#define WM8350_RTC_DAY_TUE                           3
-#define WM8350_RTC_DAY_WED                           4
-#define WM8350_RTC_DAY_THU                           5
-#define WM8350_RTC_DAY_FRI                           6
-#define WM8350_RTC_DAY_SAT                           7
-
-#define WM8350_RTC_HPM_AM                            0
-#define WM8350_RTC_HPM_PM                            1
-
-/*
- * R18 (0x12) - RTC Date/Month
- */
-#define WM8350_RTC_MTH_MASK                     0x1F00
-#define WM8350_RTC_MTH_SHIFT                         8
-#define WM8350_RTC_DATE_MASK                    0x003F
-#define WM8350_RTC_DATE_SHIFT                        0
-
-/* Bit values for R22 (0x16) */
-#define WM8350_RTC_MTH_JAN                           1
-#define WM8350_RTC_MTH_FEB                           2
-#define WM8350_RTC_MTH_MAR                           3
-#define WM8350_RTC_MTH_APR                           4
-#define WM8350_RTC_MTH_MAY                           5
-#define WM8350_RTC_MTH_JUN                           6
-#define WM8350_RTC_MTH_JUL                           7
-#define WM8350_RTC_MTH_AUG                           8
-#define WM8350_RTC_MTH_SEP                           9
-#define WM8350_RTC_MTH_OCT                          10
-#define WM8350_RTC_MTH_NOV                          11
-#define WM8350_RTC_MTH_DEC                          12
-#define WM8350_RTC_MTH_JAN_BCD                    0x01
-#define WM8350_RTC_MTH_FEB_BCD                    0x02
-#define WM8350_RTC_MTH_MAR_BCD                    0x03
-#define WM8350_RTC_MTH_APR_BCD                    0x04
-#define WM8350_RTC_MTH_MAY_BCD                    0x05
-#define WM8350_RTC_MTH_JUN_BCD                    0x06
-#define WM8350_RTC_MTH_JUL_BCD                    0x07
-#define WM8350_RTC_MTH_AUG_BCD                    0x08
-#define WM8350_RTC_MTH_SEP_BCD                    0x09
-#define WM8350_RTC_MTH_OCT_BCD                    0x10
-#define WM8350_RTC_MTH_NOV_BCD                    0x11
-#define WM8350_RTC_MTH_DEC_BCD                    0x12
-
-/*
- * R19 (0x13) - RTC Year
- */
-#define WM8350_RTC_YHUNDREDS_MASK               0x3F00
-#define WM8350_RTC_YHUNDREDS_SHIFT                   8
-#define WM8350_RTC_YUNITS_MASK                  0x00FF
-#define WM8350_RTC_YUNITS_SHIFT                      0
-
-/*
- * R20 (0x14) - Alarm Seconds/Minutes
- */
-#define WM8350_RTC_ALMMINS_MASK                 0x7F00
-#define WM8350_RTC_ALMMINS_SHIFT                     8
-#define WM8350_RTC_ALMSECS_MASK                 0x007F
-#define WM8350_RTC_ALMSECS_SHIFT                     0
-
-/* Bit values for R20 (0x14) */
-#define WM8350_RTC_ALMMINS_DONT_CARE                -1
-#define WM8350_RTC_ALMSECS_DONT_CARE                -1
-
-/*
- * R21 (0x15) - Alarm Hours/Day
- */
-#define WM8350_RTC_ALMDAY_MASK                  0x0F00
-#define WM8350_RTC_ALMDAY_SHIFT                      8
-#define WM8350_RTC_ALMHPM_MASK                  0x0020
-#define WM8350_RTC_ALMHPM_SHIFT                      5
-#define WM8350_RTC_ALMHRS_MASK                  0x001F
-#define WM8350_RTC_ALMHRS_SHIFT                      0
-
-/* Bit values for R21 (0x15) */
-#define WM8350_RTC_ALMDAY_DONT_CARE                 -1
-#define WM8350_RTC_ALMDAY_SUN                        1
-#define WM8350_RTC_ALMDAY_MON                        2
-#define WM8350_RTC_ALMDAY_TUE                        3
-#define WM8350_RTC_ALMDAY_WED                        4
-#define WM8350_RTC_ALMDAY_THU                        5
-#define WM8350_RTC_ALMDAY_FRI                        6
-#define WM8350_RTC_ALMDAY_SAT                        7
-
-#define WM8350_RTC_ALMHPM_AM                         0
-#define WM8350_RTC_ALMHPM_PM                         1
-
-#define WM8350_RTC_ALMHRS_DONT_CARE                 -1
-
-/*
- * R22 (0x16) - Alarm Date/Month
- */
-#define WM8350_RTC_ALMMTH_MASK                  0x1F00
-#define WM8350_RTC_ALMMTH_SHIFT                      8
-#define WM8350_RTC_ALMDATE_MASK                 0x003F
-#define WM8350_RTC_ALMDATE_SHIFT                     0
-
-/* Bit values for R22 (0x16) */
-#define WM8350_RTC_ALMDATE_DONT_CARE                -1
-
-#define WM8350_RTC_ALMMTH_DONT_CARE                 -1
-#define WM8350_RTC_ALMMTH_JAN                        1
-#define WM8350_RTC_ALMMTH_FEB                        2
-#define WM8350_RTC_ALMMTH_MAR                        3
-#define WM8350_RTC_ALMMTH_APR                        4
-#define WM8350_RTC_ALMMTH_MAY                        5
-#define WM8350_RTC_ALMMTH_JUN                        6
-#define WM8350_RTC_ALMMTH_JUL                        7
-#define WM8350_RTC_ALMMTH_AUG                        8
-#define WM8350_RTC_ALMMTH_SEP                        9
-#define WM8350_RTC_ALMMTH_OCT                       10
-#define WM8350_RTC_ALMMTH_NOV                       11
-#define WM8350_RTC_ALMMTH_DEC                       12
-#define WM8350_RTC_ALMMTH_JAN_BCD                 0x01
-#define WM8350_RTC_ALMMTH_FEB_BCD                 0x02
-#define WM8350_RTC_ALMMTH_MAR_BCD                 0x03
-#define WM8350_RTC_ALMMTH_APR_BCD                 0x04
-#define WM8350_RTC_ALMMTH_MAY_BCD                 0x05
-#define WM8350_RTC_ALMMTH_JUN_BCD                 0x06
-#define WM8350_RTC_ALMMTH_JUL_BCD                 0x07
-#define WM8350_RTC_ALMMTH_AUG_BCD                 0x08
-#define WM8350_RTC_ALMMTH_SEP_BCD                 0x09
-#define WM8350_RTC_ALMMTH_OCT_BCD                 0x10
-#define WM8350_RTC_ALMMTH_NOV_BCD                 0x11
-#define WM8350_RTC_ALMMTH_DEC_BCD                 0x12
-
-/*
- * R23 (0x17) - RTC Time Control
- */
-#define WM8350_RTC_BCD                          0x8000
-#define WM8350_RTC_BCD_MASK                     0x8000
-#define WM8350_RTC_BCD_SHIFT                        15
-#define WM8350_RTC_12HR                         0x4000
-#define WM8350_RTC_12HR_MASK                    0x4000
-#define WM8350_RTC_12HR_SHIFT                       14
-#define WM8350_RTC_DST                          0x2000
-#define WM8350_RTC_DST_MASK                     0x2000
-#define WM8350_RTC_DST_SHIFT                        13
-#define WM8350_RTC_SET                          0x0800
-#define WM8350_RTC_SET_MASK                     0x0800
-#define WM8350_RTC_SET_SHIFT                        11
-#define WM8350_RTC_STS                          0x0400
-#define WM8350_RTC_STS_MASK                     0x0400
-#define WM8350_RTC_STS_SHIFT                        10
-#define WM8350_RTC_ALMSET                       0x0200
-#define WM8350_RTC_ALMSET_MASK                  0x0200
-#define WM8350_RTC_ALMSET_SHIFT                      9
-#define WM8350_RTC_ALMSTS                       0x0100
-#define WM8350_RTC_ALMSTS_MASK                  0x0100
-#define WM8350_RTC_ALMSTS_SHIFT                      8
-#define WM8350_RTC_PINT                         0x0070
-#define WM8350_RTC_PINT_MASK                    0x0070
-#define WM8350_RTC_PINT_SHIFT                        4
-#define WM8350_RTC_DSW                          0x000F
-#define WM8350_RTC_DSW_MASK                     0x000F
-#define WM8350_RTC_DSW_SHIFT                         0
-
-/* Bit values for R23 (0x17) */
-#define WM8350_RTC_BCD_BINARY                        0
-#define WM8350_RTC_BCD_BCD                           1
-
-#define WM8350_RTC_12HR_24HR                         0
-#define WM8350_RTC_12HR_12HR                         1
-
-#define WM8350_RTC_DST_DISABLED                      0
-#define WM8350_RTC_DST_ENABLED                       1
-
-#define WM8350_RTC_SET_RUN                           0
-#define WM8350_RTC_SET_SET                           1
-
-#define WM8350_RTC_STS_RUNNING                       0
-#define WM8350_RTC_STS_STOPPED                       1
-
-#define WM8350_RTC_ALMSET_RUN                        0
-#define WM8350_RTC_ALMSET_SET                        1
-
-#define WM8350_RTC_ALMSTS_RUNNING                    0
-#define WM8350_RTC_ALMSTS_STOPPED                    1
-
-#define WM8350_RTC_PINT_DISABLED                     0
-#define WM8350_RTC_PINT_SECS                         1
-#define WM8350_RTC_PINT_MINS                         2
-#define WM8350_RTC_PINT_HRS                          3
-#define WM8350_RTC_PINT_DAYS                         4
-#define WM8350_RTC_PINT_MTHS                         5
-
-#define WM8350_RTC_DSW_DISABLED                      0
-#define WM8350_RTC_DSW_1HZ                           1
-#define WM8350_RTC_DSW_2HZ                           2
-#define WM8350_RTC_DSW_4HZ                           3
-#define WM8350_RTC_DSW_8HZ                           4
-#define WM8350_RTC_DSW_16HZ                          5
-#define WM8350_RTC_DSW_32HZ                          6
-#define WM8350_RTC_DSW_64HZ                          7
-#define WM8350_RTC_DSW_128HZ                         8
-#define WM8350_RTC_DSW_256HZ                         9
-#define WM8350_RTC_DSW_512HZ                        10
-#define WM8350_RTC_DSW_1024HZ                       11
-
-/*
- * R218 (0xDA) - RTC Tick Control
- */
-#define WM8350_RTC_TICKSTS                      0x4000
-#define WM8350_RTC_CLKSRC                       0x2000
-#define WM8350_RTC_TRIM_MASK                    0x03FF
-
-/*
- * RTC Interrupts.
- */
-#define WM8350_IRQ_RTC_PER			7
-#define WM8350_IRQ_RTC_SEC			8
-#define WM8350_IRQ_RTC_ALM			9
-
-struct wm8350_rtc {
-	struct platform_device *pdev;
-	struct rtc_device *rtc;
-	int alarm_enabled;      /* used over suspend/resume */
-	int update_enabled;
-};
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/mfd/wm8350/supply.h b/ANDROID_3.4.5/include/linux/mfd/wm8350/supply.h
deleted file mode 100644
index 2b947931..00000000
--- a/ANDROID_3.4.5/include/linux/mfd/wm8350/supply.h
+++ /dev/null
@@ -1,134 +0,0 @@
-/*
- * supply.h  --  Power Supply Driver for Wolfson WM8350 PMIC
- *
- * Copyright 2007 Wolfson Microelectronics PLC
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- */
-
-#ifndef __LINUX_MFD_WM8350_SUPPLY_H_
-#define __LINUX_MFD_WM8350_SUPPLY_H_
-
-#include <linux/mutex.h>
-#include <linux/power_supply.h>
-
-/*
- * Charger registers
- */
-#define WM8350_BATTERY_CHARGER_CONTROL_1        0xA8
-#define WM8350_BATTERY_CHARGER_CONTROL_2        0xA9
-#define WM8350_BATTERY_CHARGER_CONTROL_3        0xAA
-
-/*
- * R168 (0xA8) - Battery Charger Control 1
- */
-#define WM8350_CHG_ENA_R168                     0x8000
-#define WM8350_CHG_THR                          0x2000
-#define WM8350_CHG_EOC_SEL_MASK                 0x1C00
-#define WM8350_CHG_TRICKLE_TEMP_CHOKE           0x0200
-#define WM8350_CHG_TRICKLE_USB_CHOKE            0x0100
-#define WM8350_CHG_RECOVER_T                    0x0080
-#define WM8350_CHG_END_ACT                      0x0040
-#define WM8350_CHG_FAST                         0x0020
-#define WM8350_CHG_FAST_USB_THROTTLE            0x0010
-#define WM8350_CHG_NTC_MON                      0x0008
-#define WM8350_CHG_BATT_HOT_MON                 0x0004
-#define WM8350_CHG_BATT_COLD_MON                0x0002
-#define WM8350_CHG_CHIP_TEMP_MON                0x0001
-
-/*
- * R169 (0xA9) - Battery Charger Control 2
- */
-#define WM8350_CHG_ACTIVE                       0x8000
-#define WM8350_CHG_PAUSE                        0x4000
-#define WM8350_CHG_STS_MASK                     0x3000
-#define WM8350_CHG_TIME_MASK                    0x0F00
-#define WM8350_CHG_MASK_WALL_FB                 0x0080
-#define WM8350_CHG_TRICKLE_SEL                  0x0040
-#define WM8350_CHG_VSEL_MASK                    0x0030
-#define WM8350_CHG_ISEL_MASK                    0x000F
-#define WM8350_CHG_STS_OFF                      0x0000
-#define WM8350_CHG_STS_TRICKLE                  0x1000
-#define WM8350_CHG_STS_FAST                     0x2000
-
-/*
- * R170 (0xAA) - Battery Charger Control 3
- */
-#define WM8350_CHG_THROTTLE_T_MASK              0x0060
-#define WM8350_CHG_SMART                        0x0010
-#define WM8350_CHG_TIMER_ADJT_MASK              0x000F
-
-/*
- * Charger Interrupts
- */
-#define WM8350_IRQ_CHG_BAT_HOT			0
-#define WM8350_IRQ_CHG_BAT_COLD			1
-#define WM8350_IRQ_CHG_BAT_FAIL			2
-#define WM8350_IRQ_CHG_TO			3
-#define WM8350_IRQ_CHG_END			4
-#define WM8350_IRQ_CHG_START			5
-#define WM8350_IRQ_CHG_FAST_RDY			6
-#define WM8350_IRQ_CHG_VBATT_LT_3P9		10
-#define WM8350_IRQ_CHG_VBATT_LT_3P1		11
-#define WM8350_IRQ_CHG_VBATT_LT_2P85		12
-
-/*
- * Charger Policy
- */
-#define WM8350_CHG_TRICKLE_50mA			(0 << 6)
-#define WM8350_CHG_TRICKLE_100mA		(1 << 6)
-#define WM8350_CHG_4_05V			(0 << 4)
-#define WM8350_CHG_4_10V			(1 << 4)
-#define WM8350_CHG_4_15V			(2 << 4)
-#define WM8350_CHG_4_20V			(3 << 4)
-#define WM8350_CHG_FAST_LIMIT_mA(x)		((x / 50) & 0xf)
-#define WM8350_CHG_EOC_mA(x)			(((x - 10) & 0x7) << 10)
-#define WM8350_CHG_TRICKLE_3_1V			(0 << 13)
-#define WM8350_CHG_TRICKLE_3_9V			(1 << 13)
-
-/*
- * Supply Registers.
- */
-#define WM8350_USB_VOLTAGE_READBACK             0x9C
-#define WM8350_LINE_VOLTAGE_READBACK            0x9D
-#define WM8350_BATT_VOLTAGE_READBACK            0x9E
-
-/*
- * Supply Interrupts.
- */
-#define WM8350_IRQ_USB_LIMIT			15
-#define WM8350_IRQ_EXT_USB_FB			36
-#define WM8350_IRQ_EXT_WALL_FB			37
-#define WM8350_IRQ_EXT_BAT_FB			38
-
-/*
- * Policy to control charger state machine.
- */
-struct wm8350_charger_policy {
-
-	/* charger state machine policy  - set in machine driver */
-	int eoc_mA;		/* end of charge current (mA)  */
-	int charge_mV;		/* charge voltage */
-	int fast_limit_mA;	/* fast charge current limit */
-	int fast_limit_USB_mA;	/* USB fast charge current limit */
-	int charge_timeout;	/* charge timeout (mins) */
-	int trickle_start_mV;	/* trickle charge starts at mV */
-	int trickle_charge_mA;	/* trickle charge current */
-	int trickle_charge_USB_mA;	/* USB trickle charge current */
-};
-
-struct wm8350_power {
-	struct platform_device *pdev;
-	struct power_supply battery;
-	struct power_supply usb;
-	struct power_supply ac;
-	struct wm8350_charger_policy *policy;
-
-	int rev_g_coeff;
-};
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/mfd/wm8350/wdt.h b/ANDROID_3.4.5/include/linux/mfd/wm8350/wdt.h
deleted file mode 100644
index f6135b5e..00000000
--- a/ANDROID_3.4.5/include/linux/mfd/wm8350/wdt.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * wdt.h  --  Watchdog Driver for Wolfson WM8350 PMIC
- *
- * Copyright 2007, 2008 Wolfson Microelectronics PLC
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- */
-
-#ifndef __LINUX_MFD_WM8350_WDT_H_
-#define __LINUX_MFD_WM8350_WDT_H_
-
-#include <linux/platform_device.h>
-
-#define WM8350_WDOG_HIB_MODE                    0x0080
-#define WM8350_WDOG_DEBUG                       0x0040
-#define WM8350_WDOG_MODE_MASK                   0x0030
-#define WM8350_WDOG_TO_MASK                     0x0007
-
-#define WM8350_IRQ_SYS_WDOG_TO			24
-
-struct wm8350_wdt {
-	struct platform_device *pdev;
-};
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/mfd/wm8400-audio.h b/ANDROID_3.4.5/include/linux/mfd/wm8400-audio.h
deleted file mode 100644
index e06ed3eb..00000000
--- a/ANDROID_3.4.5/include/linux/mfd/wm8400-audio.h
+++ /dev/null
@@ -1,1187 +0,0 @@
-/*
- * wm8400 private definitions for audio
- *
- * Copyright 2008 Wolfson Microelectronics plc
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __LINUX_MFD_WM8400_AUDIO_H
-#define __LINUX_MFD_WM8400_AUDIO_H
-
-#include <linux/mfd/wm8400-audio.h>
-
-/*
- * R2 (0x02) - Power Management (1)
- */
-#define WM8400_CODEC_ENA                        0x8000  /* CODEC_ENA */
-#define WM8400_CODEC_ENA_MASK                   0x8000  /* CODEC_ENA */
-#define WM8400_CODEC_ENA_SHIFT                      15  /* CODEC_ENA */
-#define WM8400_CODEC_ENA_WIDTH                       1  /* CODEC_ENA */
-#define WM8400_SYSCLK_ENA                       0x4000  /* SYSCLK_ENA */
-#define WM8400_SYSCLK_ENA_MASK                  0x4000  /* SYSCLK_ENA */
-#define WM8400_SYSCLK_ENA_SHIFT                     14  /* SYSCLK_ENA */
-#define WM8400_SYSCLK_ENA_WIDTH                      1  /* SYSCLK_ENA */
-#define WM8400_SPK_MIX_ENA                      0x2000  /* SPK_MIX_ENA */
-#define WM8400_SPK_MIX_ENA_MASK                 0x2000  /* SPK_MIX_ENA */
-#define WM8400_SPK_MIX_ENA_SHIFT                    13  /* SPK_MIX_ENA */
-#define WM8400_SPK_MIX_ENA_WIDTH                     1  /* SPK_MIX_ENA */
-#define WM8400_SPK_ENA                          0x1000  /* SPK_ENA */
-#define WM8400_SPK_ENA_MASK                     0x1000  /* SPK_ENA */
-#define WM8400_SPK_ENA_SHIFT                        12  /* SPK_ENA */
-#define WM8400_SPK_ENA_WIDTH                         1  /* SPK_ENA */
-#define WM8400_OUT3_ENA                         0x0800  /* OUT3_ENA */
-#define WM8400_OUT3_ENA_MASK                    0x0800  /* OUT3_ENA */
-#define WM8400_OUT3_ENA_SHIFT                       11  /* OUT3_ENA */
-#define WM8400_OUT3_ENA_WIDTH                        1  /* OUT3_ENA */
-#define WM8400_OUT4_ENA                         0x0400  /* OUT4_ENA */
-#define WM8400_OUT4_ENA_MASK                    0x0400  /* OUT4_ENA */
-#define WM8400_OUT4_ENA_SHIFT                       10  /* OUT4_ENA */
-#define WM8400_OUT4_ENA_WIDTH                        1  /* OUT4_ENA */
-#define WM8400_LOUT_ENA                         0x0200  /* LOUT_ENA */
-#define WM8400_LOUT_ENA_MASK                    0x0200  /* LOUT_ENA */
-#define WM8400_LOUT_ENA_SHIFT                        9  /* LOUT_ENA */
-#define WM8400_LOUT_ENA_WIDTH                        1  /* LOUT_ENA */
-#define WM8400_ROUT_ENA                         0x0100  /* ROUT_ENA */
-#define WM8400_ROUT_ENA_MASK                    0x0100  /* ROUT_ENA */
-#define WM8400_ROUT_ENA_SHIFT                        8  /* ROUT_ENA */
-#define WM8400_ROUT_ENA_WIDTH                        1  /* ROUT_ENA */
-#define WM8400_MIC1BIAS_ENA                     0x0010  /* MIC1BIAS_ENA */
-#define WM8400_MIC1BIAS_ENA_MASK                0x0010  /* MIC1BIAS_ENA */
-#define WM8400_MIC1BIAS_ENA_SHIFT                    4  /* MIC1BIAS_ENA */
-#define WM8400_MIC1BIAS_ENA_WIDTH                    1  /* MIC1BIAS_ENA */
-#define WM8400_VMID_MODE_MASK                   0x0006  /* VMID_MODE - [2:1] */
-#define WM8400_VMID_MODE_SHIFT                       1  /* VMID_MODE - [2:1] */
-#define WM8400_VMID_MODE_WIDTH                       2  /* VMID_MODE - [2:1] */
-#define WM8400_VREF_ENA                         0x0001  /* VREF_ENA */
-#define WM8400_VREF_ENA_MASK                    0x0001  /* VREF_ENA */
-#define WM8400_VREF_ENA_SHIFT                        0  /* VREF_ENA */
-#define WM8400_VREF_ENA_WIDTH                        1  /* VREF_ENA */
-
-/*
- * R3 (0x03) - Power Management (2)
- */
-#define WM8400_FLL_ENA                          0x8000  /* FLL_ENA */
-#define WM8400_FLL_ENA_MASK                     0x8000  /* FLL_ENA */
-#define WM8400_FLL_ENA_SHIFT                        15  /* FLL_ENA */
-#define WM8400_FLL_ENA_WIDTH                         1  /* FLL_ENA */
-#define WM8400_TSHUT_ENA                        0x4000  /* TSHUT_ENA */
-#define WM8400_TSHUT_ENA_MASK                   0x4000  /* TSHUT_ENA */
-#define WM8400_TSHUT_ENA_SHIFT                      14  /* TSHUT_ENA */
-#define WM8400_TSHUT_ENA_WIDTH                       1  /* TSHUT_ENA */
-#define WM8400_TSHUT_OPDIS                      0x2000  /* TSHUT_OPDIS */
-#define WM8400_TSHUT_OPDIS_MASK                 0x2000  /* TSHUT_OPDIS */
-#define WM8400_TSHUT_OPDIS_SHIFT                    13  /* TSHUT_OPDIS */
-#define WM8400_TSHUT_OPDIS_WIDTH                     1  /* TSHUT_OPDIS */
-#define WM8400_OPCLK_ENA                        0x0800  /* OPCLK_ENA */
-#define WM8400_OPCLK_ENA_MASK                   0x0800  /* OPCLK_ENA */
-#define WM8400_OPCLK_ENA_SHIFT                      11  /* OPCLK_ENA */
-#define WM8400_OPCLK_ENA_WIDTH                       1  /* OPCLK_ENA */
-#define WM8400_AINL_ENA                         0x0200  /* AINL_ENA */
-#define WM8400_AINL_ENA_MASK                    0x0200  /* AINL_ENA */
-#define WM8400_AINL_ENA_SHIFT                        9  /* AINL_ENA */
-#define WM8400_AINL_ENA_WIDTH                        1  /* AINL_ENA */
-#define WM8400_AINR_ENA                         0x0100  /* AINR_ENA */
-#define WM8400_AINR_ENA_MASK                    0x0100  /* AINR_ENA */
-#define WM8400_AINR_ENA_SHIFT                        8  /* AINR_ENA */
-#define WM8400_AINR_ENA_WIDTH                        1  /* AINR_ENA */
-#define WM8400_LIN34_ENA                        0x0080  /* LIN34_ENA */
-#define WM8400_LIN34_ENA_MASK                   0x0080  /* LIN34_ENA */
-#define WM8400_LIN34_ENA_SHIFT                       7  /* LIN34_ENA */
-#define WM8400_LIN34_ENA_WIDTH                       1  /* LIN34_ENA */
-#define WM8400_LIN12_ENA                        0x0040  /* LIN12_ENA */
-#define WM8400_LIN12_ENA_MASK                   0x0040  /* LIN12_ENA */
-#define WM8400_LIN12_ENA_SHIFT                       6  /* LIN12_ENA */
-#define WM8400_LIN12_ENA_WIDTH                       1  /* LIN12_ENA */
-#define WM8400_RIN34_ENA                        0x0020  /* RIN34_ENA */
-#define WM8400_RIN34_ENA_MASK                   0x0020  /* RIN34_ENA */
-#define WM8400_RIN34_ENA_SHIFT                       5  /* RIN34_ENA */
-#define WM8400_RIN34_ENA_WIDTH                       1  /* RIN34_ENA */
-#define WM8400_RIN12_ENA                        0x0010  /* RIN12_ENA */
-#define WM8400_RIN12_ENA_MASK                   0x0010  /* RIN12_ENA */
-#define WM8400_RIN12_ENA_SHIFT                       4  /* RIN12_ENA */
-#define WM8400_RIN12_ENA_WIDTH                       1  /* RIN12_ENA */
-#define WM8400_ADCL_ENA                         0x0002  /* ADCL_ENA */
-#define WM8400_ADCL_ENA_MASK                    0x0002  /* ADCL_ENA */
-#define WM8400_ADCL_ENA_SHIFT                        1  /* ADCL_ENA */
-#define WM8400_ADCL_ENA_WIDTH                        1  /* ADCL_ENA */
-#define WM8400_ADCR_ENA                         0x0001  /* ADCR_ENA */
-#define WM8400_ADCR_ENA_MASK                    0x0001  /* ADCR_ENA */
-#define WM8400_ADCR_ENA_SHIFT                        0  /* ADCR_ENA */
-#define WM8400_ADCR_ENA_WIDTH                        1  /* ADCR_ENA */
-
-/*
- * R4 (0x04) - Power Management (3)
- */
-#define WM8400_LON_ENA                          0x2000  /* LON_ENA */
-#define WM8400_LON_ENA_MASK                     0x2000  /* LON_ENA */
-#define WM8400_LON_ENA_SHIFT                        13  /* LON_ENA */
-#define WM8400_LON_ENA_WIDTH                         1  /* LON_ENA */
-#define WM8400_LOP_ENA                          0x1000  /* LOP_ENA */
-#define WM8400_LOP_ENA_MASK                     0x1000  /* LOP_ENA */
-#define WM8400_LOP_ENA_SHIFT                        12  /* LOP_ENA */
-#define WM8400_LOP_ENA_WIDTH                         1  /* LOP_ENA */
-#define WM8400_RON_ENA                          0x0800  /* RON_ENA */
-#define WM8400_RON_ENA_MASK                     0x0800  /* RON_ENA */
-#define WM8400_RON_ENA_SHIFT                        11  /* RON_ENA */
-#define WM8400_RON_ENA_WIDTH                         1  /* RON_ENA */
-#define WM8400_ROP_ENA                          0x0400  /* ROP_ENA */
-#define WM8400_ROP_ENA_MASK                     0x0400  /* ROP_ENA */
-#define WM8400_ROP_ENA_SHIFT                        10  /* ROP_ENA */
-#define WM8400_ROP_ENA_WIDTH                         1  /* ROP_ENA */
-#define WM8400_LOPGA_ENA                        0x0080  /* LOPGA_ENA */
-#define WM8400_LOPGA_ENA_MASK                   0x0080  /* LOPGA_ENA */
-#define WM8400_LOPGA_ENA_SHIFT                       7  /* LOPGA_ENA */
-#define WM8400_LOPGA_ENA_WIDTH                       1  /* LOPGA_ENA */
-#define WM8400_ROPGA_ENA                        0x0040  /* ROPGA_ENA */
-#define WM8400_ROPGA_ENA_MASK                   0x0040  /* ROPGA_ENA */
-#define WM8400_ROPGA_ENA_SHIFT                       6  /* ROPGA_ENA */
-#define WM8400_ROPGA_ENA_WIDTH                       1  /* ROPGA_ENA */
-#define WM8400_LOMIX_ENA                        0x0020  /* LOMIX_ENA */
-#define WM8400_LOMIX_ENA_MASK                   0x0020  /* LOMIX_ENA */
-#define WM8400_LOMIX_ENA_SHIFT                       5  /* LOMIX_ENA */
-#define WM8400_LOMIX_ENA_WIDTH                       1  /* LOMIX_ENA */
-#define WM8400_ROMIX_ENA                        0x0010  /* ROMIX_ENA */
-#define WM8400_ROMIX_ENA_MASK                   0x0010  /* ROMIX_ENA */
-#define WM8400_ROMIX_ENA_SHIFT                       4  /* ROMIX_ENA */
-#define WM8400_ROMIX_ENA_WIDTH                       1  /* ROMIX_ENA */
-#define WM8400_DACL_ENA                         0x0002  /* DACL_ENA */
-#define WM8400_DACL_ENA_MASK                    0x0002  /* DACL_ENA */
-#define WM8400_DACL_ENA_SHIFT                        1  /* DACL_ENA */
-#define WM8400_DACL_ENA_WIDTH                        1  /* DACL_ENA */
-#define WM8400_DACR_ENA                         0x0001  /* DACR_ENA */
-#define WM8400_DACR_ENA_MASK                    0x0001  /* DACR_ENA */
-#define WM8400_DACR_ENA_SHIFT                        0  /* DACR_ENA */
-#define WM8400_DACR_ENA_WIDTH                        1  /* DACR_ENA */
-
-/*
- * R5 (0x05) - Audio Interface (1)
- */
-#define WM8400_AIFADCL_SRC                      0x8000  /* AIFADCL_SRC */
-#define WM8400_AIFADCL_SRC_MASK                 0x8000  /* AIFADCL_SRC */
-#define WM8400_AIFADCL_SRC_SHIFT                    15  /* AIFADCL_SRC */
-#define WM8400_AIFADCL_SRC_WIDTH                     1  /* AIFADCL_SRC */
-#define WM8400_AIFADCR_SRC                      0x4000  /* AIFADCR_SRC */
-#define WM8400_AIFADCR_SRC_MASK                 0x4000  /* AIFADCR_SRC */
-#define WM8400_AIFADCR_SRC_SHIFT                    14  /* AIFADCR_SRC */
-#define WM8400_AIFADCR_SRC_WIDTH                     1  /* AIFADCR_SRC */
-#define WM8400_AIFADC_TDM                       0x2000  /* AIFADC_TDM */
-#define WM8400_AIFADC_TDM_MASK                  0x2000  /* AIFADC_TDM */
-#define WM8400_AIFADC_TDM_SHIFT                     13  /* AIFADC_TDM */
-#define WM8400_AIFADC_TDM_WIDTH                      1  /* AIFADC_TDM */
-#define WM8400_AIFADC_TDM_CHAN                  0x1000  /* AIFADC_TDM_CHAN */
-#define WM8400_AIFADC_TDM_CHAN_MASK             0x1000  /* AIFADC_TDM_CHAN */
-#define WM8400_AIFADC_TDM_CHAN_SHIFT                12  /* AIFADC_TDM_CHAN */
-#define WM8400_AIFADC_TDM_CHAN_WIDTH                 1  /* AIFADC_TDM_CHAN */
-#define WM8400_AIF_BCLK_INV                     0x0100  /* AIF_BCLK_INV */
-#define WM8400_AIF_BCLK_INV_MASK                0x0100  /* AIF_BCLK_INV */
-#define WM8400_AIF_BCLK_INV_SHIFT                    8  /* AIF_BCLK_INV */
-#define WM8400_AIF_BCLK_INV_WIDTH                    1  /* AIF_BCLK_INV */
-#define WM8400_AIF_LRCLK_INV                    0x0080  /* AIF_LRCLK_INV */
-#define WM8400_AIF_LRCLK_INV_MASK               0x0080  /* AIF_LRCLK_INV */
-#define WM8400_AIF_LRCLK_INV_SHIFT                   7  /* AIF_LRCLK_INV */
-#define WM8400_AIF_LRCLK_INV_WIDTH                   1  /* AIF_LRCLK_INV */
-#define WM8400_AIF_WL_MASK                      0x0060  /* AIF_WL - [6:5] */
-#define WM8400_AIF_WL_SHIFT                          5  /* AIF_WL - [6:5] */
-#define WM8400_AIF_WL_WIDTH                          2  /* AIF_WL - [6:5] */
-#define WM8400_AIF_WL_16BITS			(0 << 5)
-#define WM8400_AIF_WL_20BITS			(1 << 5)
-#define WM8400_AIF_WL_24BITS			(2 << 5)
-#define WM8400_AIF_WL_32BITS			(3 << 5)
-#define WM8400_AIF_FMT_MASK                     0x0018  /* AIF_FMT - [4:3] */
-#define WM8400_AIF_FMT_SHIFT                         3  /* AIF_FMT - [4:3] */
-#define WM8400_AIF_FMT_WIDTH                         2  /* AIF_FMT - [4:3] */
-#define WM8400_AIF_FMT_RIGHTJ			(0 << 3)
-#define WM8400_AIF_FMT_LEFTJ			(1 << 3)
-#define WM8400_AIF_FMT_I2S			(2 << 3)
-#define WM8400_AIF_FMT_DSP			(3 << 3)
-
-/*
- * R6 (0x06) - Audio Interface (2)
- */
-#define WM8400_DACL_SRC                         0x8000  /* DACL_SRC */
-#define WM8400_DACL_SRC_MASK                    0x8000  /* DACL_SRC */
-#define WM8400_DACL_SRC_SHIFT                       15  /* DACL_SRC */
-#define WM8400_DACL_SRC_WIDTH                        1  /* DACL_SRC */
-#define WM8400_DACR_SRC                         0x4000  /* DACR_SRC */
-#define WM8400_DACR_SRC_MASK                    0x4000  /* DACR_SRC */
-#define WM8400_DACR_SRC_SHIFT                       14  /* DACR_SRC */
-#define WM8400_DACR_SRC_WIDTH                        1  /* DACR_SRC */
-#define WM8400_AIFDAC_TDM                       0x2000  /* AIFDAC_TDM */
-#define WM8400_AIFDAC_TDM_MASK                  0x2000  /* AIFDAC_TDM */
-#define WM8400_AIFDAC_TDM_SHIFT                     13  /* AIFDAC_TDM */
-#define WM8400_AIFDAC_TDM_WIDTH                      1  /* AIFDAC_TDM */
-#define WM8400_AIFDAC_TDM_CHAN                  0x1000  /* AIFDAC_TDM_CHAN */
-#define WM8400_AIFDAC_TDM_CHAN_MASK             0x1000  /* AIFDAC_TDM_CHAN */
-#define WM8400_AIFDAC_TDM_CHAN_SHIFT                12  /* AIFDAC_TDM_CHAN */
-#define WM8400_AIFDAC_TDM_CHAN_WIDTH                 1  /* AIFDAC_TDM_CHAN */
-#define WM8400_DAC_BOOST_MASK                   0x0C00  /* DAC_BOOST - [11:10] */
-#define WM8400_DAC_BOOST_SHIFT                      10  /* DAC_BOOST - [11:10] */
-#define WM8400_DAC_BOOST_WIDTH                       2  /* DAC_BOOST - [11:10] */
-#define WM8400_DAC_COMP                         0x0010  /* DAC_COMP */
-#define WM8400_DAC_COMP_MASK                    0x0010  /* DAC_COMP */
-#define WM8400_DAC_COMP_SHIFT                        4  /* DAC_COMP */
-#define WM8400_DAC_COMP_WIDTH                        1  /* DAC_COMP */
-#define WM8400_DAC_COMPMODE                     0x0008  /* DAC_COMPMODE */
-#define WM8400_DAC_COMPMODE_MASK                0x0008  /* DAC_COMPMODE */
-#define WM8400_DAC_COMPMODE_SHIFT                    3  /* DAC_COMPMODE */
-#define WM8400_DAC_COMPMODE_WIDTH                    1  /* DAC_COMPMODE */
-#define WM8400_ADC_COMP                         0x0004  /* ADC_COMP */
-#define WM8400_ADC_COMP_MASK                    0x0004  /* ADC_COMP */
-#define WM8400_ADC_COMP_SHIFT                        2  /* ADC_COMP */
-#define WM8400_ADC_COMP_WIDTH                        1  /* ADC_COMP */
-#define WM8400_ADC_COMPMODE                     0x0002  /* ADC_COMPMODE */
-#define WM8400_ADC_COMPMODE_MASK                0x0002  /* ADC_COMPMODE */
-#define WM8400_ADC_COMPMODE_SHIFT                    1  /* ADC_COMPMODE */
-#define WM8400_ADC_COMPMODE_WIDTH                    1  /* ADC_COMPMODE */
-#define WM8400_LOOPBACK                         0x0001  /* LOOPBACK */
-#define WM8400_LOOPBACK_MASK                    0x0001  /* LOOPBACK */
-#define WM8400_LOOPBACK_SHIFT                        0  /* LOOPBACK */
-#define WM8400_LOOPBACK_WIDTH                        1  /* LOOPBACK */
-
-/*
- * R7 (0x07) - Clocking (1)
- */
-#define WM8400_TOCLK_RATE                       0x8000  /* TOCLK_RATE */
-#define WM8400_TOCLK_RATE_MASK                  0x8000  /* TOCLK_RATE */
-#define WM8400_TOCLK_RATE_SHIFT                     15  /* TOCLK_RATE */
-#define WM8400_TOCLK_RATE_WIDTH                      1  /* TOCLK_RATE */
-#define WM8400_TOCLK_ENA                        0x4000  /* TOCLK_ENA */
-#define WM8400_TOCLK_ENA_MASK                   0x4000  /* TOCLK_ENA */
-#define WM8400_TOCLK_ENA_SHIFT                      14  /* TOCLK_ENA */
-#define WM8400_TOCLK_ENA_WIDTH                       1  /* TOCLK_ENA */
-#define WM8400_OPCLKDIV_MASK                    0x1E00  /* OPCLKDIV - [12:9] */
-#define WM8400_OPCLKDIV_SHIFT                        9  /* OPCLKDIV - [12:9] */
-#define WM8400_OPCLKDIV_WIDTH                        4  /* OPCLKDIV - [12:9] */
-#define WM8400_DCLKDIV_MASK                     0x01C0  /* DCLKDIV - [8:6] */
-#define WM8400_DCLKDIV_SHIFT                         6  /* DCLKDIV - [8:6] */
-#define WM8400_DCLKDIV_WIDTH                         3  /* DCLKDIV - [8:6] */
-#define WM8400_BCLK_DIV_MASK                    0x001E  /* BCLK_DIV - [4:1] */
-#define WM8400_BCLK_DIV_SHIFT                        1  /* BCLK_DIV - [4:1] */
-#define WM8400_BCLK_DIV_WIDTH                        4  /* BCLK_DIV - [4:1] */
-
-/*
- * R8 (0x08) - Clocking (2)
- */
-#define WM8400_MCLK_SRC                         0x8000  /* MCLK_SRC */
-#define WM8400_MCLK_SRC_MASK                    0x8000  /* MCLK_SRC */
-#define WM8400_MCLK_SRC_SHIFT                       15  /* MCLK_SRC */
-#define WM8400_MCLK_SRC_WIDTH                        1  /* MCLK_SRC */
-#define WM8400_SYSCLK_SRC                       0x4000  /* SYSCLK_SRC */
-#define WM8400_SYSCLK_SRC_MASK                  0x4000  /* SYSCLK_SRC */
-#define WM8400_SYSCLK_SRC_SHIFT                     14  /* SYSCLK_SRC */
-#define WM8400_SYSCLK_SRC_WIDTH                      1  /* SYSCLK_SRC */
-#define WM8400_CLK_FORCE                        0x2000  /* CLK_FORCE */
-#define WM8400_CLK_FORCE_MASK                   0x2000  /* CLK_FORCE */
-#define WM8400_CLK_FORCE_SHIFT                      13  /* CLK_FORCE */
-#define WM8400_CLK_FORCE_WIDTH                       1  /* CLK_FORCE */
-#define WM8400_MCLK_DIV_MASK                    0x1800  /* MCLK_DIV - [12:11] */
-#define WM8400_MCLK_DIV_SHIFT                       11  /* MCLK_DIV - [12:11] */
-#define WM8400_MCLK_DIV_WIDTH                        2  /* MCLK_DIV - [12:11] */
-#define WM8400_MCLK_INV                         0x0400  /* MCLK_INV */
-#define WM8400_MCLK_INV_MASK                    0x0400  /* MCLK_INV */
-#define WM8400_MCLK_INV_SHIFT                       10  /* MCLK_INV */
-#define WM8400_MCLK_INV_WIDTH                        1  /* MCLK_INV */
-#define WM8400_ADC_CLKDIV_MASK                  0x00E0  /* ADC_CLKDIV - [7:5] */
-#define WM8400_ADC_CLKDIV_SHIFT                      5  /* ADC_CLKDIV - [7:5] */
-#define WM8400_ADC_CLKDIV_WIDTH                      3  /* ADC_CLKDIV - [7:5] */
-#define WM8400_DAC_CLKDIV_MASK                  0x001C  /* DAC_CLKDIV - [4:2] */
-#define WM8400_DAC_CLKDIV_SHIFT                      2  /* DAC_CLKDIV - [4:2] */
-#define WM8400_DAC_CLKDIV_WIDTH                      3  /* DAC_CLKDIV - [4:2] */
-
-/*
- * R9 (0x09) - Audio Interface (3)
- */
-#define WM8400_AIF_MSTR1                        0x8000  /* AIF_MSTR1 */
-#define WM8400_AIF_MSTR1_MASK                   0x8000  /* AIF_MSTR1 */
-#define WM8400_AIF_MSTR1_SHIFT                      15  /* AIF_MSTR1 */
-#define WM8400_AIF_MSTR1_WIDTH                       1  /* AIF_MSTR1 */
-#define WM8400_AIF_MSTR2                        0x4000  /* AIF_MSTR2 */
-#define WM8400_AIF_MSTR2_MASK                   0x4000  /* AIF_MSTR2 */
-#define WM8400_AIF_MSTR2_SHIFT                      14  /* AIF_MSTR2 */
-#define WM8400_AIF_MSTR2_WIDTH                       1  /* AIF_MSTR2 */
-#define WM8400_AIF_SEL                          0x2000  /* AIF_SEL */
-#define WM8400_AIF_SEL_MASK                     0x2000  /* AIF_SEL */
-#define WM8400_AIF_SEL_SHIFT                        13  /* AIF_SEL */
-#define WM8400_AIF_SEL_WIDTH                         1  /* AIF_SEL */
-#define WM8400_ADCLRC_DIR                       0x0800  /* ADCLRC_DIR */
-#define WM8400_ADCLRC_DIR_MASK                  0x0800  /* ADCLRC_DIR */
-#define WM8400_ADCLRC_DIR_SHIFT                     11  /* ADCLRC_DIR */
-#define WM8400_ADCLRC_DIR_WIDTH                      1  /* ADCLRC_DIR */
-#define WM8400_ADCLRC_RATE_MASK                 0x07FF  /* ADCLRC_RATE - [10:0] */
-#define WM8400_ADCLRC_RATE_SHIFT                     0  /* ADCLRC_RATE - [10:0] */
-#define WM8400_ADCLRC_RATE_WIDTH                    11  /* ADCLRC_RATE - [10:0] */
-
-/*
- * R10 (0x0A) - Audio Interface (4)
- */
-#define WM8400_ALRCGPIO1                        0x8000  /* ALRCGPIO1 */
-#define WM8400_ALRCGPIO1_MASK                   0x8000  /* ALRCGPIO1 */
-#define WM8400_ALRCGPIO1_SHIFT                      15  /* ALRCGPIO1 */
-#define WM8400_ALRCGPIO1_WIDTH                       1  /* ALRCGPIO1 */
-#define WM8400_ALRCBGPIO6                       0x4000  /* ALRCBGPIO6 */
-#define WM8400_ALRCBGPIO6_MASK                  0x4000  /* ALRCBGPIO6 */
-#define WM8400_ALRCBGPIO6_SHIFT                     14  /* ALRCBGPIO6 */
-#define WM8400_ALRCBGPIO6_WIDTH                      1  /* ALRCBGPIO6 */
-#define WM8400_AIF_TRIS                         0x2000  /* AIF_TRIS */
-#define WM8400_AIF_TRIS_MASK                    0x2000  /* AIF_TRIS */
-#define WM8400_AIF_TRIS_SHIFT                       13  /* AIF_TRIS */
-#define WM8400_AIF_TRIS_WIDTH                        1  /* AIF_TRIS */
-#define WM8400_DACLRC_DIR                       0x0800  /* DACLRC_DIR */
-#define WM8400_DACLRC_DIR_MASK                  0x0800  /* DACLRC_DIR */
-#define WM8400_DACLRC_DIR_SHIFT                     11  /* DACLRC_DIR */
-#define WM8400_DACLRC_DIR_WIDTH                      1  /* DACLRC_DIR */
-#define WM8400_DACLRC_RATE_MASK                 0x07FF  /* DACLRC_RATE - [10:0] */
-#define WM8400_DACLRC_RATE_SHIFT                     0  /* DACLRC_RATE - [10:0] */
-#define WM8400_DACLRC_RATE_WIDTH                    11  /* DACLRC_RATE - [10:0] */
-
-/*
- * R11 (0x0B) - DAC CTRL
- */
-#define WM8400_DAC_SDMCLK_RATE                  0x2000  /* DAC_SDMCLK_RATE */
-#define WM8400_DAC_SDMCLK_RATE_MASK             0x2000  /* DAC_SDMCLK_RATE */
-#define WM8400_DAC_SDMCLK_RATE_SHIFT                13  /* DAC_SDMCLK_RATE */
-#define WM8400_DAC_SDMCLK_RATE_WIDTH                 1  /* DAC_SDMCLK_RATE */
-#define WM8400_AIF_LRCLKRATE                    0x0400  /* AIF_LRCLKRATE */
-#define WM8400_AIF_LRCLKRATE_MASK               0x0400  /* AIF_LRCLKRATE */
-#define WM8400_AIF_LRCLKRATE_SHIFT                  10  /* AIF_LRCLKRATE */
-#define WM8400_AIF_LRCLKRATE_WIDTH                   1  /* AIF_LRCLKRATE */
-#define WM8400_DAC_MONO                         0x0200  /* DAC_MONO */
-#define WM8400_DAC_MONO_MASK                    0x0200  /* DAC_MONO */
-#define WM8400_DAC_MONO_SHIFT                        9  /* DAC_MONO */
-#define WM8400_DAC_MONO_WIDTH                        1  /* DAC_MONO */
-#define WM8400_DAC_SB_FILT                      0x0100  /* DAC_SB_FILT */
-#define WM8400_DAC_SB_FILT_MASK                 0x0100  /* DAC_SB_FILT */
-#define WM8400_DAC_SB_FILT_SHIFT                     8  /* DAC_SB_FILT */
-#define WM8400_DAC_SB_FILT_WIDTH                     1  /* DAC_SB_FILT */
-#define WM8400_DAC_MUTERATE                     0x0080  /* DAC_MUTERATE */
-#define WM8400_DAC_MUTERATE_MASK                0x0080  /* DAC_MUTERATE */
-#define WM8400_DAC_MUTERATE_SHIFT                    7  /* DAC_MUTERATE */
-#define WM8400_DAC_MUTERATE_WIDTH                    1  /* DAC_MUTERATE */
-#define WM8400_DAC_MUTEMODE                     0x0040  /* DAC_MUTEMODE */
-#define WM8400_DAC_MUTEMODE_MASK                0x0040  /* DAC_MUTEMODE */
-#define WM8400_DAC_MUTEMODE_SHIFT                    6  /* DAC_MUTEMODE */
-#define WM8400_DAC_MUTEMODE_WIDTH                    1  /* DAC_MUTEMODE */
-#define WM8400_DEEMP_MASK                       0x0030  /* DEEMP - [5:4] */
-#define WM8400_DEEMP_SHIFT                           4  /* DEEMP - [5:4] */
-#define WM8400_DEEMP_WIDTH                           2  /* DEEMP - [5:4] */
-#define WM8400_DAC_MUTE                         0x0004  /* DAC_MUTE */
-#define WM8400_DAC_MUTE_MASK                    0x0004  /* DAC_MUTE */
-#define WM8400_DAC_MUTE_SHIFT                        2  /* DAC_MUTE */
-#define WM8400_DAC_MUTE_WIDTH                        1  /* DAC_MUTE */
-#define WM8400_DACL_DATINV                      0x0002  /* DACL_DATINV */
-#define WM8400_DACL_DATINV_MASK                 0x0002  /* DACL_DATINV */
-#define WM8400_DACL_DATINV_SHIFT                     1  /* DACL_DATINV */
-#define WM8400_DACL_DATINV_WIDTH                     1  /* DACL_DATINV */
-#define WM8400_DACR_DATINV                      0x0001  /* DACR_DATINV */
-#define WM8400_DACR_DATINV_MASK                 0x0001  /* DACR_DATINV */
-#define WM8400_DACR_DATINV_SHIFT                     0  /* DACR_DATINV */
-#define WM8400_DACR_DATINV_WIDTH                     1  /* DACR_DATINV */
-
-/*
- * R12 (0x0C) - Left DAC Digital Volume
- */
-#define WM8400_DAC_VU                           0x0100  /* DAC_VU */
-#define WM8400_DAC_VU_MASK                      0x0100  /* DAC_VU */
-#define WM8400_DAC_VU_SHIFT                          8  /* DAC_VU */
-#define WM8400_DAC_VU_WIDTH                          1  /* DAC_VU */
-#define WM8400_DACL_VOL_MASK                    0x00FF  /* DACL_VOL - [7:0] */
-#define WM8400_DACL_VOL_SHIFT                        0  /* DACL_VOL - [7:0] */
-#define WM8400_DACL_VOL_WIDTH                        8  /* DACL_VOL - [7:0] */
-
-/*
- * R13 (0x0D) - Right DAC Digital Volume
- */
-#define WM8400_DAC_VU                           0x0100  /* DAC_VU */
-#define WM8400_DAC_VU_MASK                      0x0100  /* DAC_VU */
-#define WM8400_DAC_VU_SHIFT                          8  /* DAC_VU */
-#define WM8400_DAC_VU_WIDTH                          1  /* DAC_VU */
-#define WM8400_DACR_VOL_MASK                    0x00FF  /* DACR_VOL - [7:0] */
-#define WM8400_DACR_VOL_SHIFT                        0  /* DACR_VOL - [7:0] */
-#define WM8400_DACR_VOL_WIDTH                        8  /* DACR_VOL - [7:0] */
-
-/*
- * R14 (0x0E) - Digital Side Tone
- */
-#define WM8400_ADCL_DAC_SVOL_MASK               0x1E00  /*   ADCL_DAC_SVOL - [12:9] */
-#define WM8400_ADCL_DAC_SVOL_SHIFT                   9  /*   ADCL_DAC_SVOL - [12:9] */
-#define WM8400_ADCL_DAC_SVOL_WIDTH                   4  /*   ADCL_DAC_SVOL - [12:9] */
-#define WM8400_ADCR_DAC_SVOL_MASK               0x01E0  /* ADCR_DAC_SVOL - [8:5] */
-#define WM8400_ADCR_DAC_SVOL_SHIFT                   5  /* ADCR_DAC_SVOL - [8:5] */
-#define WM8400_ADCR_DAC_SVOL_WIDTH                   4  /* ADCR_DAC_SVOL - [8:5] */
-#define WM8400_ADC_TO_DACL_MASK                 0x000C  /* ADC_TO_DACL - [3:2] */
-#define WM8400_ADC_TO_DACL_SHIFT                     2  /* ADC_TO_DACL - [3:2] */
-#define WM8400_ADC_TO_DACL_WIDTH                     2  /* ADC_TO_DACL - [3:2] */
-#define WM8400_ADC_TO_DACR_MASK                 0x0003  /* ADC_TO_DACR - [1:0] */
-#define WM8400_ADC_TO_DACR_SHIFT                     0  /* ADC_TO_DACR - [1:0] */
-#define WM8400_ADC_TO_DACR_WIDTH                     2  /* ADC_TO_DACR - [1:0] */
-
-/*
- * R15 (0x0F) - ADC CTRL
- */
-#define WM8400_ADC_HPF_ENA                      0x0100  /* ADC_HPF_ENA */
-#define WM8400_ADC_HPF_ENA_MASK                 0x0100  /* ADC_HPF_ENA */
-#define WM8400_ADC_HPF_ENA_SHIFT                     8  /* ADC_HPF_ENA */
-#define WM8400_ADC_HPF_ENA_WIDTH                     1  /* ADC_HPF_ENA */
-#define WM8400_ADC_HPF_CUT_MASK                 0x0060  /* ADC_HPF_CUT - [6:5] */
-#define WM8400_ADC_HPF_CUT_SHIFT                     5  /* ADC_HPF_CUT - [6:5] */
-#define WM8400_ADC_HPF_CUT_WIDTH                     2  /* ADC_HPF_CUT - [6:5] */
-#define WM8400_ADCL_DATINV                      0x0002  /* ADCL_DATINV */
-#define WM8400_ADCL_DATINV_MASK                 0x0002  /* ADCL_DATINV */
-#define WM8400_ADCL_DATINV_SHIFT                     1  /* ADCL_DATINV */
-#define WM8400_ADCL_DATINV_WIDTH                     1  /* ADCL_DATINV */
-#define WM8400_ADCR_DATINV                      0x0001  /* ADCR_DATINV */
-#define WM8400_ADCR_DATINV_MASK                 0x0001  /* ADCR_DATINV */
-#define WM8400_ADCR_DATINV_SHIFT                     0  /* ADCR_DATINV */
-#define WM8400_ADCR_DATINV_WIDTH                     1  /* ADCR_DATINV */
-
-/*
- * R16 (0x10) - Left ADC Digital Volume
- */
-#define WM8400_ADC_VU                           0x0100  /* ADC_VU */
-#define WM8400_ADC_VU_MASK                      0x0100  /* ADC_VU */
-#define WM8400_ADC_VU_SHIFT                          8  /* ADC_VU */
-#define WM8400_ADC_VU_WIDTH                          1  /* ADC_VU */
-#define WM8400_ADCL_VOL_MASK                    0x00FF  /* ADCL_VOL - [7:0] */
-#define WM8400_ADCL_VOL_SHIFT                        0  /* ADCL_VOL - [7:0] */
-#define WM8400_ADCL_VOL_WIDTH                        8  /* ADCL_VOL - [7:0] */
-
-/*
- * R17 (0x11) - Right ADC Digital Volume
- */
-#define WM8400_ADC_VU                           0x0100  /* ADC_VU */
-#define WM8400_ADC_VU_MASK                      0x0100  /* ADC_VU */
-#define WM8400_ADC_VU_SHIFT                          8  /* ADC_VU */
-#define WM8400_ADC_VU_WIDTH                          1  /* ADC_VU */
-#define WM8400_ADCR_VOL_MASK                    0x00FF  /* ADCR_VOL - [7:0] */
-#define WM8400_ADCR_VOL_SHIFT                        0  /* ADCR_VOL - [7:0] */
-#define WM8400_ADCR_VOL_WIDTH                        8  /* ADCR_VOL - [7:0] */
-
-/*
- * R24 (0x18) - Left Line Input 1&2 Volume
- */
-#define WM8400_IPVU                             0x0100  /* IPVU */
-#define WM8400_IPVU_MASK                        0x0100  /* IPVU */
-#define WM8400_IPVU_SHIFT                            8  /* IPVU */
-#define WM8400_IPVU_WIDTH                            1  /* IPVU */
-#define WM8400_LI12MUTE                         0x0080  /* LI12MUTE */
-#define WM8400_LI12MUTE_MASK                    0x0080  /* LI12MUTE */
-#define WM8400_LI12MUTE_SHIFT                        7  /* LI12MUTE */
-#define WM8400_LI12MUTE_WIDTH                        1  /* LI12MUTE */
-#define WM8400_LI12ZC                           0x0040  /* LI12ZC */
-#define WM8400_LI12ZC_MASK                      0x0040  /* LI12ZC */
-#define WM8400_LI12ZC_SHIFT                          6  /* LI12ZC */
-#define WM8400_LI12ZC_WIDTH                          1  /* LI12ZC */
-#define WM8400_LIN12VOL_MASK                    0x001F  /* LIN12VOL - [4:0] */
-#define WM8400_LIN12VOL_SHIFT                        0  /* LIN12VOL - [4:0] */
-#define WM8400_LIN12VOL_WIDTH                        5  /* LIN12VOL - [4:0] */
-
-/*
- * R25 (0x19) - Left Line Input 3&4 Volume
- */
-#define WM8400_IPVU                             0x0100  /* IPVU */
-#define WM8400_IPVU_MASK                        0x0100  /* IPVU */
-#define WM8400_IPVU_SHIFT                            8  /* IPVU */
-#define WM8400_IPVU_WIDTH                            1  /* IPVU */
-#define WM8400_LI34MUTE                         0x0080  /* LI34MUTE */
-#define WM8400_LI34MUTE_MASK                    0x0080  /* LI34MUTE */
-#define WM8400_LI34MUTE_SHIFT                        7  /* LI34MUTE */
-#define WM8400_LI34MUTE_WIDTH                        1  /* LI34MUTE */
-#define WM8400_LI34ZC                           0x0040  /* LI34ZC */
-#define WM8400_LI34ZC_MASK                      0x0040  /* LI34ZC */
-#define WM8400_LI34ZC_SHIFT                          6  /* LI34ZC */
-#define WM8400_LI34ZC_WIDTH                          1  /* LI34ZC */
-#define WM8400_LIN34VOL_MASK                    0x001F  /* LIN34VOL - [4:0] */
-#define WM8400_LIN34VOL_SHIFT                        0  /* LIN34VOL - [4:0] */
-#define WM8400_LIN34VOL_WIDTH                        5  /* LIN34VOL - [4:0] */
-
-/*
- * R26 (0x1A) - Right Line Input 1&2 Volume
- */
-#define WM8400_IPVU                             0x0100  /* IPVU */
-#define WM8400_IPVU_MASK                        0x0100  /* IPVU */
-#define WM8400_IPVU_SHIFT                            8  /* IPVU */
-#define WM8400_IPVU_WIDTH                            1  /* IPVU */
-#define WM8400_RI12MUTE                         0x0080  /* RI12MUTE */
-#define WM8400_RI12MUTE_MASK                    0x0080  /* RI12MUTE */
-#define WM8400_RI12MUTE_SHIFT                        7  /* RI12MUTE */
-#define WM8400_RI12MUTE_WIDTH                        1  /* RI12MUTE */
-#define WM8400_RI12ZC                           0x0040  /* RI12ZC */
-#define WM8400_RI12ZC_MASK                      0x0040  /* RI12ZC */
-#define WM8400_RI12ZC_SHIFT                          6  /* RI12ZC */
-#define WM8400_RI12ZC_WIDTH                          1  /* RI12ZC */
-#define WM8400_RIN12VOL_MASK                    0x001F  /* RIN12VOL - [4:0] */
-#define WM8400_RIN12VOL_SHIFT                        0  /* RIN12VOL - [4:0] */
-#define WM8400_RIN12VOL_WIDTH                        5  /* RIN12VOL - [4:0] */
-
-/*
- * R27 (0x1B) - Right Line Input 3&4 Volume
- */
-#define WM8400_IPVU                             0x0100  /* IPVU */
-#define WM8400_IPVU_MASK                        0x0100  /* IPVU */
-#define WM8400_IPVU_SHIFT                            8  /* IPVU */
-#define WM8400_IPVU_WIDTH                            1  /* IPVU */
-#define WM8400_RI34MUTE                         0x0080  /* RI34MUTE */
-#define WM8400_RI34MUTE_MASK                    0x0080  /* RI34MUTE */
-#define WM8400_RI34MUTE_SHIFT                        7  /* RI34MUTE */
-#define WM8400_RI34MUTE_WIDTH                        1  /* RI34MUTE */
-#define WM8400_RI34ZC                           0x0040  /* RI34ZC */
-#define WM8400_RI34ZC_MASK                      0x0040  /* RI34ZC */
-#define WM8400_RI34ZC_SHIFT                          6  /* RI34ZC */
-#define WM8400_RI34ZC_WIDTH                          1  /* RI34ZC */
-#define WM8400_RIN34VOL_MASK                    0x001F  /* RIN34VOL - [4:0] */
-#define WM8400_RIN34VOL_SHIFT                        0  /* RIN34VOL - [4:0] */
-#define WM8400_RIN34VOL_WIDTH                        5  /* RIN34VOL - [4:0] */
-
-/*
- * R28 (0x1C) - Left Output Volume
- */
-#define WM8400_OPVU                             0x0100  /* OPVU */
-#define WM8400_OPVU_MASK                        0x0100  /* OPVU */
-#define WM8400_OPVU_SHIFT                            8  /* OPVU */
-#define WM8400_OPVU_WIDTH                            1  /* OPVU */
-#define WM8400_LOZC                             0x0080  /* LOZC */
-#define WM8400_LOZC_MASK                        0x0080  /* LOZC */
-#define WM8400_LOZC_SHIFT                            7  /* LOZC */
-#define WM8400_LOZC_WIDTH                            1  /* LOZC */
-#define WM8400_LOUTVOL_MASK                     0x007F  /* LOUTVOL - [6:0] */
-#define WM8400_LOUTVOL_SHIFT                         0  /* LOUTVOL - [6:0] */
-#define WM8400_LOUTVOL_WIDTH                         7  /* LOUTVOL - [6:0] */
-
-/*
- * R29 (0x1D) - Right Output Volume
- */
-#define WM8400_OPVU                             0x0100  /* OPVU */
-#define WM8400_OPVU_MASK                        0x0100  /* OPVU */
-#define WM8400_OPVU_SHIFT                            8  /* OPVU */
-#define WM8400_OPVU_WIDTH                            1  /* OPVU */
-#define WM8400_ROZC                             0x0080  /* ROZC */
-#define WM8400_ROZC_MASK                        0x0080  /* ROZC */
-#define WM8400_ROZC_SHIFT                            7  /* ROZC */
-#define WM8400_ROZC_WIDTH                            1  /* ROZC */
-#define WM8400_ROUTVOL_MASK                     0x007F  /* ROUTVOL - [6:0] */
-#define WM8400_ROUTVOL_SHIFT                         0  /* ROUTVOL - [6:0] */
-#define WM8400_ROUTVOL_WIDTH                         7  /* ROUTVOL - [6:0] */
-
-/*
- * R30 (0x1E) - Line Outputs Volume
- */
-#define WM8400_LONMUTE                          0x0040  /* LONMUTE */
-#define WM8400_LONMUTE_MASK                     0x0040  /* LONMUTE */
-#define WM8400_LONMUTE_SHIFT                         6  /* LONMUTE */
-#define WM8400_LONMUTE_WIDTH                         1  /* LONMUTE */
-#define WM8400_LOPMUTE                          0x0020  /* LOPMUTE */
-#define WM8400_LOPMUTE_MASK                     0x0020  /* LOPMUTE */
-#define WM8400_LOPMUTE_SHIFT                         5  /* LOPMUTE */
-#define WM8400_LOPMUTE_WIDTH                         1  /* LOPMUTE */
-#define WM8400_LOATTN                           0x0010  /* LOATTN */
-#define WM8400_LOATTN_MASK                      0x0010  /* LOATTN */
-#define WM8400_LOATTN_SHIFT                          4  /* LOATTN */
-#define WM8400_LOATTN_WIDTH                          1  /* LOATTN */
-#define WM8400_RONMUTE                          0x0004  /* RONMUTE */
-#define WM8400_RONMUTE_MASK                     0x0004  /* RONMUTE */
-#define WM8400_RONMUTE_SHIFT                         2  /* RONMUTE */
-#define WM8400_RONMUTE_WIDTH                         1  /* RONMUTE */
-#define WM8400_ROPMUTE                          0x0002  /* ROPMUTE */
-#define WM8400_ROPMUTE_MASK                     0x0002  /* ROPMUTE */
-#define WM8400_ROPMUTE_SHIFT                         1  /* ROPMUTE */
-#define WM8400_ROPMUTE_WIDTH                         1  /* ROPMUTE */
-#define WM8400_ROATTN                           0x0001  /* ROATTN */
-#define WM8400_ROATTN_MASK                      0x0001  /* ROATTN */
-#define WM8400_ROATTN_SHIFT                          0  /* ROATTN */
-#define WM8400_ROATTN_WIDTH                          1  /* ROATTN */
-
-/*
- * R31 (0x1F) - Out3/4 Volume
- */
-#define WM8400_OUT3MUTE                         0x0020  /* OUT3MUTE */
-#define WM8400_OUT3MUTE_MASK                    0x0020  /* OUT3MUTE */
-#define WM8400_OUT3MUTE_SHIFT                        5  /* OUT3MUTE */
-#define WM8400_OUT3MUTE_WIDTH                        1  /* OUT3MUTE */
-#define WM8400_OUT3ATTN                         0x0010  /* OUT3ATTN */
-#define WM8400_OUT3ATTN_MASK                    0x0010  /* OUT3ATTN */
-#define WM8400_OUT3ATTN_SHIFT                        4  /* OUT3ATTN */
-#define WM8400_OUT3ATTN_WIDTH                        1  /* OUT3ATTN */
-#define WM8400_OUT4MUTE                         0x0002  /* OUT4MUTE */
-#define WM8400_OUT4MUTE_MASK                    0x0002  /* OUT4MUTE */
-#define WM8400_OUT4MUTE_SHIFT                        1  /* OUT4MUTE */
-#define WM8400_OUT4MUTE_WIDTH                        1  /* OUT4MUTE */
-#define WM8400_OUT4ATTN                         0x0001  /* OUT4ATTN */
-#define WM8400_OUT4ATTN_MASK                    0x0001  /* OUT4ATTN */
-#define WM8400_OUT4ATTN_SHIFT                        0  /* OUT4ATTN */
-#define WM8400_OUT4ATTN_WIDTH                        1  /* OUT4ATTN */
-
-/*
- * R32 (0x20) - Left OPGA Volume
- */
-#define WM8400_OPVU                             0x0100  /* OPVU */
-#define WM8400_OPVU_MASK                        0x0100  /* OPVU */
-#define WM8400_OPVU_SHIFT                            8  /* OPVU */
-#define WM8400_OPVU_WIDTH                            1  /* OPVU */
-#define WM8400_LOPGAZC                          0x0080  /* LOPGAZC */
-#define WM8400_LOPGAZC_MASK                     0x0080  /* LOPGAZC */
-#define WM8400_LOPGAZC_SHIFT                         7  /* LOPGAZC */
-#define WM8400_LOPGAZC_WIDTH                         1  /* LOPGAZC */
-#define WM8400_LOPGAVOL_MASK                    0x007F  /* LOPGAVOL - [6:0] */
-#define WM8400_LOPGAVOL_SHIFT                        0  /* LOPGAVOL - [6:0] */
-#define WM8400_LOPGAVOL_WIDTH                        7  /* LOPGAVOL - [6:0] */
-
-/*
- * R33 (0x21) - Right OPGA Volume
- */
-#define WM8400_OPVU                             0x0100  /* OPVU */
-#define WM8400_OPVU_MASK                        0x0100  /* OPVU */
-#define WM8400_OPVU_SHIFT                            8  /* OPVU */
-#define WM8400_OPVU_WIDTH                            1  /* OPVU */
-#define WM8400_ROPGAZC                          0x0080  /* ROPGAZC */
-#define WM8400_ROPGAZC_MASK                     0x0080  /* ROPGAZC */
-#define WM8400_ROPGAZC_SHIFT                         7  /* ROPGAZC */
-#define WM8400_ROPGAZC_WIDTH                         1  /* ROPGAZC */
-#define WM8400_ROPGAVOL_MASK                    0x007F  /* ROPGAVOL - [6:0] */
-#define WM8400_ROPGAVOL_SHIFT                        0  /* ROPGAVOL - [6:0] */
-#define WM8400_ROPGAVOL_WIDTH                        7  /* ROPGAVOL - [6:0] */
-
-/*
- * R34 (0x22) - Speaker Volume
- */
-#define WM8400_SPKATTN_MASK                     0x0003  /* SPKATTN - [1:0] */
-#define WM8400_SPKATTN_SHIFT                         0  /* SPKATTN - [1:0] */
-#define WM8400_SPKATTN_WIDTH                         2  /* SPKATTN - [1:0] */
-
-/*
- * R35 (0x23) - ClassD1
- */
-#define WM8400_CDMODE                           0x0100  /* CDMODE */
-#define WM8400_CDMODE_MASK                      0x0100  /* CDMODE */
-#define WM8400_CDMODE_SHIFT                          8  /* CDMODE */
-#define WM8400_CDMODE_WIDTH                          1  /* CDMODE */
-#define WM8400_CLASSD_CLK_SEL                   0x0080  /* CLASSD_CLK_SEL */
-#define WM8400_CLASSD_CLK_SEL_MASK              0x0080  /* CLASSD_CLK_SEL */
-#define WM8400_CLASSD_CLK_SEL_SHIFT                  7  /* CLASSD_CLK_SEL */
-#define WM8400_CLASSD_CLK_SEL_WIDTH                  1  /* CLASSD_CLK_SEL */
-#define WM8400_CD_SRCTRL                        0x0040  /* CD_SRCTRL */
-#define WM8400_CD_SRCTRL_MASK                   0x0040  /* CD_SRCTRL */
-#define WM8400_CD_SRCTRL_SHIFT                       6  /* CD_SRCTRL */
-#define WM8400_CD_SRCTRL_WIDTH                       1  /* CD_SRCTRL */
-#define WM8400_SPKNOPOP                         0x0020  /* SPKNOPOP */
-#define WM8400_SPKNOPOP_MASK                    0x0020  /* SPKNOPOP */
-#define WM8400_SPKNOPOP_SHIFT                        5  /* SPKNOPOP */
-#define WM8400_SPKNOPOP_WIDTH                        1  /* SPKNOPOP */
-#define WM8400_DBLERATE                         0x0010  /* DBLERATE */
-#define WM8400_DBLERATE_MASK                    0x0010  /* DBLERATE */
-#define WM8400_DBLERATE_SHIFT                        4  /* DBLERATE */
-#define WM8400_DBLERATE_WIDTH                        1  /* DBLERATE */
-#define WM8400_LOOPTEST                         0x0008  /* LOOPTEST */
-#define WM8400_LOOPTEST_MASK                    0x0008  /* LOOPTEST */
-#define WM8400_LOOPTEST_SHIFT                        3  /* LOOPTEST */
-#define WM8400_LOOPTEST_WIDTH                        1  /* LOOPTEST */
-#define WM8400_HALFABBIAS                       0x0004  /* HALFABBIAS */
-#define WM8400_HALFABBIAS_MASK                  0x0004  /* HALFABBIAS */
-#define WM8400_HALFABBIAS_SHIFT                      2  /* HALFABBIAS */
-#define WM8400_HALFABBIAS_WIDTH                      1  /* HALFABBIAS */
-#define WM8400_TRIDEL_MASK                      0x0003  /* TRIDEL - [1:0] */
-#define WM8400_TRIDEL_SHIFT                          0  /* TRIDEL - [1:0] */
-#define WM8400_TRIDEL_WIDTH                          2  /* TRIDEL - [1:0] */
-
-/*
- * R37 (0x25) - ClassD3
- */
-#define WM8400_DCGAIN_MASK                      0x0038  /* DCGAIN - [5:3] */
-#define WM8400_DCGAIN_SHIFT                          3  /* DCGAIN - [5:3] */
-#define WM8400_DCGAIN_WIDTH                          3  /* DCGAIN - [5:3] */
-#define WM8400_ACGAIN_MASK                      0x0007  /* ACGAIN - [2:0] */
-#define WM8400_ACGAIN_SHIFT                          0  /* ACGAIN - [2:0] */
-#define WM8400_ACGAIN_WIDTH                          3  /* ACGAIN - [2:0] */
-
-/*
- * R39 (0x27) - Input Mixer1
- */
-#define WM8400_AINLMODE_MASK                    0x000C  /* AINLMODE - [3:2] */
-#define WM8400_AINLMODE_SHIFT                        2  /* AINLMODE - [3:2] */
-#define WM8400_AINLMODE_WIDTH                        2  /* AINLMODE - [3:2] */
-#define WM8400_AINRMODE_MASK                    0x0003  /* AINRMODE - [1:0] */
-#define WM8400_AINRMODE_SHIFT                        0  /* AINRMODE - [1:0] */
-#define WM8400_AINRMODE_WIDTH                        2  /* AINRMODE - [1:0] */
-
-/*
- * R40 (0x28) - Input Mixer2
- */
-#define WM8400_LMP4                             0x0080  /* LMP4 */
-#define WM8400_LMP4_MASK                        0x0080  /* LMP4 */
-#define WM8400_LMP4_SHIFT                            7  /* LMP4 */
-#define WM8400_LMP4_WIDTH                            1  /* LMP4 */
-#define WM8400_LMN3                             0x0040  /* LMN3 */
-#define WM8400_LMN3_MASK                        0x0040  /* LMN3 */
-#define WM8400_LMN3_SHIFT                            6  /* LMN3 */
-#define WM8400_LMN3_WIDTH                            1  /* LMN3 */
-#define WM8400_LMP2                             0x0020  /* LMP2 */
-#define WM8400_LMP2_MASK                        0x0020  /* LMP2 */
-#define WM8400_LMP2_SHIFT                            5  /* LMP2 */
-#define WM8400_LMP2_WIDTH                            1  /* LMP2 */
-#define WM8400_LMN1                             0x0010  /* LMN1 */
-#define WM8400_LMN1_MASK                        0x0010  /* LMN1 */
-#define WM8400_LMN1_SHIFT                            4  /* LMN1 */
-#define WM8400_LMN1_WIDTH                            1  /* LMN1 */
-#define WM8400_RMP4                             0x0008  /* RMP4 */
-#define WM8400_RMP4_MASK                        0x0008  /* RMP4 */
-#define WM8400_RMP4_SHIFT                            3  /* RMP4 */
-#define WM8400_RMP4_WIDTH                            1  /* RMP4 */
-#define WM8400_RMN3                             0x0004  /* RMN3 */
-#define WM8400_RMN3_MASK                        0x0004  /* RMN3 */
-#define WM8400_RMN3_SHIFT                            2  /* RMN3 */
-#define WM8400_RMN3_WIDTH                            1  /* RMN3 */
-#define WM8400_RMP2                             0x0002  /* RMP2 */
-#define WM8400_RMP2_MASK                        0x0002  /* RMP2 */
-#define WM8400_RMP2_SHIFT                            1  /* RMP2 */
-#define WM8400_RMP2_WIDTH                            1  /* RMP2 */
-#define WM8400_RMN1                             0x0001  /* RMN1 */
-#define WM8400_RMN1_MASK                        0x0001  /* RMN1 */
-#define WM8400_RMN1_SHIFT                            0  /* RMN1 */
-#define WM8400_RMN1_WIDTH                            1  /* RMN1 */
-
-/*
- * R41 (0x29) - Input Mixer3
- */
-#define WM8400_L34MNB                           0x0100  /* L34MNB */
-#define WM8400_L34MNB_MASK                      0x0100  /* L34MNB */
-#define WM8400_L34MNB_SHIFT                          8  /* L34MNB */
-#define WM8400_L34MNB_WIDTH                          1  /* L34MNB */
-#define WM8400_L34MNBST                         0x0080  /* L34MNBST */
-#define WM8400_L34MNBST_MASK                    0x0080  /* L34MNBST */
-#define WM8400_L34MNBST_SHIFT                        7  /* L34MNBST */
-#define WM8400_L34MNBST_WIDTH                        1  /* L34MNBST */
-#define WM8400_L12MNB                           0x0020  /* L12MNB */
-#define WM8400_L12MNB_MASK                      0x0020  /* L12MNB */
-#define WM8400_L12MNB_SHIFT                          5  /* L12MNB */
-#define WM8400_L12MNB_WIDTH                          1  /* L12MNB */
-#define WM8400_L12MNBST                         0x0010  /* L12MNBST */
-#define WM8400_L12MNBST_MASK                    0x0010  /* L12MNBST */
-#define WM8400_L12MNBST_SHIFT                        4  /* L12MNBST */
-#define WM8400_L12MNBST_WIDTH                        1  /* L12MNBST */
-#define WM8400_LDBVOL_MASK                      0x0007  /* LDBVOL - [2:0] */
-#define WM8400_LDBVOL_SHIFT                          0  /* LDBVOL - [2:0] */
-#define WM8400_LDBVOL_WIDTH                          3  /* LDBVOL - [2:0] */
-
-/*
- * R42 (0x2A) - Input Mixer4
- */
-#define WM8400_R34MNB                           0x0100  /* R34MNB */
-#define WM8400_R34MNB_MASK                      0x0100  /* R34MNB */
-#define WM8400_R34MNB_SHIFT                          8  /* R34MNB */
-#define WM8400_R34MNB_WIDTH                          1  /* R34MNB */
-#define WM8400_R34MNBST                         0x0080  /* R34MNBST */
-#define WM8400_R34MNBST_MASK                    0x0080  /* R34MNBST */
-#define WM8400_R34MNBST_SHIFT                        7  /* R34MNBST */
-#define WM8400_R34MNBST_WIDTH                        1  /* R34MNBST */
-#define WM8400_R12MNB                           0x0020  /* R12MNB */
-#define WM8400_R12MNB_MASK                      0x0020  /* R12MNB */
-#define WM8400_R12MNB_SHIFT                          5  /* R12MNB */
-#define WM8400_R12MNB_WIDTH                          1  /* R12MNB */
-#define WM8400_R12MNBST                         0x0010  /* R12MNBST */
-#define WM8400_R12MNBST_MASK                    0x0010  /* R12MNBST */
-#define WM8400_R12MNBST_SHIFT                        4  /* R12MNBST */
-#define WM8400_R12MNBST_WIDTH                        1  /* R12MNBST */
-#define WM8400_RDBVOL_MASK                      0x0007  /* RDBVOL - [2:0] */
-#define WM8400_RDBVOL_SHIFT                          0  /* RDBVOL - [2:0] */
-#define WM8400_RDBVOL_WIDTH                          3  /* RDBVOL - [2:0] */
-
-/*
- * R43 (0x2B) - Input Mixer5
- */
-#define WM8400_LI2BVOL_MASK                     0x01C0  /* LI2BVOL - [8:6] */
-#define WM8400_LI2BVOL_SHIFT                         6  /* LI2BVOL - [8:6] */
-#define WM8400_LI2BVOL_WIDTH                         3  /* LI2BVOL - [8:6] */
-#define WM8400_LR4BVOL_MASK                     0x0038  /* LR4BVOL - [5:3] */
-#define WM8400_LR4BVOL_SHIFT                         3  /* LR4BVOL - [5:3] */
-#define WM8400_LR4BVOL_WIDTH                         3  /* LR4BVOL - [5:3] */
-#define WM8400_LL4BVOL_MASK                     0x0007  /* LL4BVOL - [2:0] */
-#define WM8400_LL4BVOL_SHIFT                         0  /* LL4BVOL - [2:0] */
-#define WM8400_LL4BVOL_WIDTH                         3  /* LL4BVOL - [2:0] */
-
-/*
- * R44 (0x2C) - Input Mixer6
- */
-#define WM8400_RI2BVOL_MASK                     0x01C0  /* RI2BVOL - [8:6] */
-#define WM8400_RI2BVOL_SHIFT                         6  /* RI2BVOL - [8:6] */
-#define WM8400_RI2BVOL_WIDTH                         3  /* RI2BVOL - [8:6] */
-#define WM8400_RL4BVOL_MASK                     0x0038  /* RL4BVOL - [5:3] */
-#define WM8400_RL4BVOL_SHIFT                         3  /* RL4BVOL - [5:3] */
-#define WM8400_RL4BVOL_WIDTH                         3  /* RL4BVOL - [5:3] */
-#define WM8400_RR4BVOL_MASK                     0x0007  /* RR4BVOL - [2:0] */
-#define WM8400_RR4BVOL_SHIFT                         0  /* RR4BVOL - [2:0] */
-#define WM8400_RR4BVOL_WIDTH                         3  /* RR4BVOL - [2:0] */
-
-/*
- * R45 (0x2D) - Output Mixer1
- */
-#define WM8400_LRBLO                            0x0080  /* LRBLO */
-#define WM8400_LRBLO_MASK                       0x0080  /* LRBLO */
-#define WM8400_LRBLO_SHIFT                           7  /* LRBLO */
-#define WM8400_LRBLO_WIDTH                           1  /* LRBLO */
-#define WM8400_LLBLO                            0x0040  /* LLBLO */
-#define WM8400_LLBLO_MASK                       0x0040  /* LLBLO */
-#define WM8400_LLBLO_SHIFT                           6  /* LLBLO */
-#define WM8400_LLBLO_WIDTH                           1  /* LLBLO */
-#define WM8400_LRI3LO                           0x0020  /* LRI3LO */
-#define WM8400_LRI3LO_MASK                      0x0020  /* LRI3LO */
-#define WM8400_LRI3LO_SHIFT                          5  /* LRI3LO */
-#define WM8400_LRI3LO_WIDTH                          1  /* LRI3LO */
-#define WM8400_LLI3LO                           0x0010  /* LLI3LO */
-#define WM8400_LLI3LO_MASK                      0x0010  /* LLI3LO */
-#define WM8400_LLI3LO_SHIFT                          4  /* LLI3LO */
-#define WM8400_LLI3LO_WIDTH                          1  /* LLI3LO */
-#define WM8400_LR12LO                           0x0008  /* LR12LO */
-#define WM8400_LR12LO_MASK                      0x0008  /* LR12LO */
-#define WM8400_LR12LO_SHIFT                          3  /* LR12LO */
-#define WM8400_LR12LO_WIDTH                          1  /* LR12LO */
-#define WM8400_LL12LO                           0x0004  /* LL12LO */
-#define WM8400_LL12LO_MASK                      0x0004  /* LL12LO */
-#define WM8400_LL12LO_SHIFT                          2  /* LL12LO */
-#define WM8400_LL12LO_WIDTH                          1  /* LL12LO */
-#define WM8400_LDLO                             0x0001  /* LDLO */
-#define WM8400_LDLO_MASK                        0x0001  /* LDLO */
-#define WM8400_LDLO_SHIFT                            0  /* LDLO */
-#define WM8400_LDLO_WIDTH                            1  /* LDLO */
-
-/*
- * R46 (0x2E) - Output Mixer2
- */
-#define WM8400_RLBRO                            0x0080  /* RLBRO */
-#define WM8400_RLBRO_MASK                       0x0080  /* RLBRO */
-#define WM8400_RLBRO_SHIFT                           7  /* RLBRO */
-#define WM8400_RLBRO_WIDTH                           1  /* RLBRO */
-#define WM8400_RRBRO                            0x0040  /* RRBRO */
-#define WM8400_RRBRO_MASK                       0x0040  /* RRBRO */
-#define WM8400_RRBRO_SHIFT                           6  /* RRBRO */
-#define WM8400_RRBRO_WIDTH                           1  /* RRBRO */
-#define WM8400_RLI3RO                           0x0020  /* RLI3RO */
-#define WM8400_RLI3RO_MASK                      0x0020  /* RLI3RO */
-#define WM8400_RLI3RO_SHIFT                          5  /* RLI3RO */
-#define WM8400_RLI3RO_WIDTH                          1  /* RLI3RO */
-#define WM8400_RRI3RO                           0x0010  /* RRI3RO */
-#define WM8400_RRI3RO_MASK                      0x0010  /* RRI3RO */
-#define WM8400_RRI3RO_SHIFT                          4  /* RRI3RO */
-#define WM8400_RRI3RO_WIDTH                          1  /* RRI3RO */
-#define WM8400_RL12RO                           0x0008  /* RL12RO */
-#define WM8400_RL12RO_MASK                      0x0008  /* RL12RO */
-#define WM8400_RL12RO_SHIFT                          3  /* RL12RO */
-#define WM8400_RL12RO_WIDTH                          1  /* RL12RO */
-#define WM8400_RR12RO                           0x0004  /* RR12RO */
-#define WM8400_RR12RO_MASK                      0x0004  /* RR12RO */
-#define WM8400_RR12RO_SHIFT                          2  /* RR12RO */
-#define WM8400_RR12RO_WIDTH                          1  /* RR12RO */
-#define WM8400_RDRO                             0x0001  /* RDRO */
-#define WM8400_RDRO_MASK                        0x0001  /* RDRO */
-#define WM8400_RDRO_SHIFT                            0  /* RDRO */
-#define WM8400_RDRO_WIDTH                            1  /* RDRO */
-
-/*
- * R47 (0x2F) - Output Mixer3
- */
-#define WM8400_LLI3LOVOL_MASK                   0x01C0  /* LLI3LOVOL - [8:6] */
-#define WM8400_LLI3LOVOL_SHIFT                       6  /* LLI3LOVOL - [8:6] */
-#define WM8400_LLI3LOVOL_WIDTH                       3  /* LLI3LOVOL - [8:6] */
-#define WM8400_LR12LOVOL_MASK                   0x0038  /* LR12LOVOL - [5:3] */
-#define WM8400_LR12LOVOL_SHIFT                       3  /* LR12LOVOL - [5:3] */
-#define WM8400_LR12LOVOL_WIDTH                       3  /* LR12LOVOL - [5:3] */
-#define WM8400_LL12LOVOL_MASK                   0x0007  /* LL12LOVOL - [2:0] */
-#define WM8400_LL12LOVOL_SHIFT                       0  /* LL12LOVOL - [2:0] */
-#define WM8400_LL12LOVOL_WIDTH                       3  /* LL12LOVOL - [2:0] */
-
-/*
- * R48 (0x30) - Output Mixer4
- */
-#define WM8400_RRI3ROVOL_MASK                   0x01C0  /* RRI3ROVOL - [8:6] */
-#define WM8400_RRI3ROVOL_SHIFT                       6  /* RRI3ROVOL - [8:6] */
-#define WM8400_RRI3ROVOL_WIDTH                       3  /* RRI3ROVOL - [8:6] */
-#define WM8400_RL12ROVOL_MASK                   0x0038  /* RL12ROVOL - [5:3] */
-#define WM8400_RL12ROVOL_SHIFT                       3  /* RL12ROVOL - [5:3] */
-#define WM8400_RL12ROVOL_WIDTH                       3  /* RL12ROVOL - [5:3] */
-#define WM8400_RR12ROVOL_MASK                   0x0007  /* RR12ROVOL - [2:0] */
-#define WM8400_RR12ROVOL_SHIFT                       0  /* RR12ROVOL - [2:0] */
-#define WM8400_RR12ROVOL_WIDTH                       3  /* RR12ROVOL - [2:0] */
-
-/*
- * R49 (0x31) - Output Mixer5
- */
-#define WM8400_LRI3LOVOL_MASK                   0x01C0  /* LRI3LOVOL - [8:6] */
-#define WM8400_LRI3LOVOL_SHIFT                       6  /* LRI3LOVOL - [8:6] */
-#define WM8400_LRI3LOVOL_WIDTH                       3  /* LRI3LOVOL - [8:6] */
-#define WM8400_LRBLOVOL_MASK                    0x0038  /* LRBLOVOL - [5:3] */
-#define WM8400_LRBLOVOL_SHIFT                        3  /* LRBLOVOL - [5:3] */
-#define WM8400_LRBLOVOL_WIDTH                        3  /* LRBLOVOL - [5:3] */
-#define WM8400_LLBLOVOL_MASK                    0x0007  /* LLBLOVOL - [2:0] */
-#define WM8400_LLBLOVOL_SHIFT                        0  /* LLBLOVOL - [2:0] */
-#define WM8400_LLBLOVOL_WIDTH                        3  /* LLBLOVOL - [2:0] */
-
-/*
- * R50 (0x32) - Output Mixer6
- */
-#define WM8400_RLI3ROVOL_MASK                   0x01C0  /* RLI3ROVOL - [8:6] */
-#define WM8400_RLI3ROVOL_SHIFT                       6  /* RLI3ROVOL - [8:6] */
-#define WM8400_RLI3ROVOL_WIDTH                       3  /* RLI3ROVOL - [8:6] */
-#define WM8400_RLBROVOL_MASK                    0x0038  /* RLBROVOL - [5:3] */
-#define WM8400_RLBROVOL_SHIFT                        3  /* RLBROVOL - [5:3] */
-#define WM8400_RLBROVOL_WIDTH                        3  /* RLBROVOL - [5:3] */
-#define WM8400_RRBROVOL_MASK                    0x0007  /* RRBROVOL - [2:0] */
-#define WM8400_RRBROVOL_SHIFT                        0  /* RRBROVOL - [2:0] */
-#define WM8400_RRBROVOL_WIDTH                        3  /* RRBROVOL - [2:0] */
-
-/*
- * R51 (0x33) - Out3/4 Mixer
- */
-#define WM8400_VSEL_MASK                        0x0180  /* VSEL - [8:7] */
-#define WM8400_VSEL_SHIFT                            7  /* VSEL - [8:7] */
-#define WM8400_VSEL_WIDTH                            2  /* VSEL - [8:7] */
-#define WM8400_LI4O3                            0x0020  /* LI4O3 */
-#define WM8400_LI4O3_MASK                       0x0020  /* LI4O3 */
-#define WM8400_LI4O3_SHIFT                           5  /* LI4O3 */
-#define WM8400_LI4O3_WIDTH                           1  /* LI4O3 */
-#define WM8400_LPGAO3                           0x0010  /* LPGAO3 */
-#define WM8400_LPGAO3_MASK                      0x0010  /* LPGAO3 */
-#define WM8400_LPGAO3_SHIFT                          4  /* LPGAO3 */
-#define WM8400_LPGAO3_WIDTH                          1  /* LPGAO3 */
-#define WM8400_RI4O4                            0x0002  /* RI4O4 */
-#define WM8400_RI4O4_MASK                       0x0002  /* RI4O4 */
-#define WM8400_RI4O4_SHIFT                           1  /* RI4O4 */
-#define WM8400_RI4O4_WIDTH                           1  /* RI4O4 */
-#define WM8400_RPGAO4                           0x0001  /* RPGAO4 */
-#define WM8400_RPGAO4_MASK                      0x0001  /* RPGAO4 */
-#define WM8400_RPGAO4_SHIFT                          0  /* RPGAO4 */
-#define WM8400_RPGAO4_WIDTH                          1  /* RPGAO4 */
-
-/*
- * R52 (0x34) - Line Mixer1
- */
-#define WM8400_LLOPGALON                        0x0040  /* LLOPGALON */
-#define WM8400_LLOPGALON_MASK                   0x0040  /* LLOPGALON */
-#define WM8400_LLOPGALON_SHIFT                       6  /* LLOPGALON */
-#define WM8400_LLOPGALON_WIDTH                       1  /* LLOPGALON */
-#define WM8400_LROPGALON                        0x0020  /* LROPGALON */
-#define WM8400_LROPGALON_MASK                   0x0020  /* LROPGALON */
-#define WM8400_LROPGALON_SHIFT                       5  /* LROPGALON */
-#define WM8400_LROPGALON_WIDTH                       1  /* LROPGALON */
-#define WM8400_LOPLON                           0x0010  /* LOPLON */
-#define WM8400_LOPLON_MASK                      0x0010  /* LOPLON */
-#define WM8400_LOPLON_SHIFT                          4  /* LOPLON */
-#define WM8400_LOPLON_WIDTH                          1  /* LOPLON */
-#define WM8400_LR12LOP                          0x0004  /* LR12LOP */
-#define WM8400_LR12LOP_MASK                     0x0004  /* LR12LOP */
-#define WM8400_LR12LOP_SHIFT                         2  /* LR12LOP */
-#define WM8400_LR12LOP_WIDTH                         1  /* LR12LOP */
-#define WM8400_LL12LOP                          0x0002  /* LL12LOP */
-#define WM8400_LL12LOP_MASK                     0x0002  /* LL12LOP */
-#define WM8400_LL12LOP_SHIFT                         1  /* LL12LOP */
-#define WM8400_LL12LOP_WIDTH                         1  /* LL12LOP */
-#define WM8400_LLOPGALOP                        0x0001  /* LLOPGALOP */
-#define WM8400_LLOPGALOP_MASK                   0x0001  /* LLOPGALOP */
-#define WM8400_LLOPGALOP_SHIFT                       0  /* LLOPGALOP */
-#define WM8400_LLOPGALOP_WIDTH                       1  /* LLOPGALOP */
-
-/*
- * R53 (0x35) - Line Mixer2
- */
-#define WM8400_RROPGARON                        0x0040  /* RROPGARON */
-#define WM8400_RROPGARON_MASK                   0x0040  /* RROPGARON */
-#define WM8400_RROPGARON_SHIFT                       6  /* RROPGARON */
-#define WM8400_RROPGARON_WIDTH                       1  /* RROPGARON */
-#define WM8400_RLOPGARON                        0x0020  /* RLOPGARON */
-#define WM8400_RLOPGARON_MASK                   0x0020  /* RLOPGARON */
-#define WM8400_RLOPGARON_SHIFT                       5  /* RLOPGARON */
-#define WM8400_RLOPGARON_WIDTH                       1  /* RLOPGARON */
-#define WM8400_ROPRON                           0x0010  /* ROPRON */
-#define WM8400_ROPRON_MASK                      0x0010  /* ROPRON */
-#define WM8400_ROPRON_SHIFT                          4  /* ROPRON */
-#define WM8400_ROPRON_WIDTH                          1  /* ROPRON */
-#define WM8400_RL12ROP                          0x0004  /* RL12ROP */
-#define WM8400_RL12ROP_MASK                     0x0004  /* RL12ROP */
-#define WM8400_RL12ROP_SHIFT                         2  /* RL12ROP */
-#define WM8400_RL12ROP_WIDTH                         1  /* RL12ROP */
-#define WM8400_RR12ROP                          0x0002  /* RR12ROP */
-#define WM8400_RR12ROP_MASK                     0x0002  /* RR12ROP */
-#define WM8400_RR12ROP_SHIFT                         1  /* RR12ROP */
-#define WM8400_RR12ROP_WIDTH                         1  /* RR12ROP */
-#define WM8400_RROPGAROP                        0x0001  /* RROPGAROP */
-#define WM8400_RROPGAROP_MASK                   0x0001  /* RROPGAROP */
-#define WM8400_RROPGAROP_SHIFT                       0  /* RROPGAROP */
-#define WM8400_RROPGAROP_WIDTH                       1  /* RROPGAROP */
-
-/*
- * R54 (0x36) - Speaker Mixer
- */
-#define WM8400_LB2SPK                           0x0080  /* LB2SPK */
-#define WM8400_LB2SPK_MASK                      0x0080  /* LB2SPK */
-#define WM8400_LB2SPK_SHIFT                          7  /* LB2SPK */
-#define WM8400_LB2SPK_WIDTH                          1  /* LB2SPK */
-#define WM8400_RB2SPK                           0x0040  /* RB2SPK */
-#define WM8400_RB2SPK_MASK                      0x0040  /* RB2SPK */
-#define WM8400_RB2SPK_SHIFT                          6  /* RB2SPK */
-#define WM8400_RB2SPK_WIDTH                          1  /* RB2SPK */
-#define WM8400_LI2SPK                           0x0020  /* LI2SPK */
-#define WM8400_LI2SPK_MASK                      0x0020  /* LI2SPK */
-#define WM8400_LI2SPK_SHIFT                          5  /* LI2SPK */
-#define WM8400_LI2SPK_WIDTH                          1  /* LI2SPK */
-#define WM8400_RI2SPK                           0x0010  /* RI2SPK */
-#define WM8400_RI2SPK_MASK                      0x0010  /* RI2SPK */
-#define WM8400_RI2SPK_SHIFT                          4  /* RI2SPK */
-#define WM8400_RI2SPK_WIDTH                          1  /* RI2SPK */
-#define WM8400_LOPGASPK                         0x0008  /* LOPGASPK */
-#define WM8400_LOPGASPK_MASK                    0x0008  /* LOPGASPK */
-#define WM8400_LOPGASPK_SHIFT                        3  /* LOPGASPK */
-#define WM8400_LOPGASPK_WIDTH                        1  /* LOPGASPK */
-#define WM8400_ROPGASPK                         0x0004  /* ROPGASPK */
-#define WM8400_ROPGASPK_MASK                    0x0004  /* ROPGASPK */
-#define WM8400_ROPGASPK_SHIFT                        2  /* ROPGASPK */
-#define WM8400_ROPGASPK_WIDTH                        1  /* ROPGASPK */
-#define WM8400_LDSPK                            0x0002  /* LDSPK */
-#define WM8400_LDSPK_MASK                       0x0002  /* LDSPK */
-#define WM8400_LDSPK_SHIFT                           1  /* LDSPK */
-#define WM8400_LDSPK_WIDTH                           1  /* LDSPK */
-#define WM8400_RDSPK                            0x0001  /* RDSPK */
-#define WM8400_RDSPK_MASK                       0x0001  /* RDSPK */
-#define WM8400_RDSPK_SHIFT                           0  /* RDSPK */
-#define WM8400_RDSPK_WIDTH                           1  /* RDSPK */
-
-/*
- * R55 (0x37) - Additional Control
- */
-#define WM8400_VROI                             0x0001  /* VROI */
-#define WM8400_VROI_MASK                        0x0001  /* VROI */
-#define WM8400_VROI_SHIFT                            0  /* VROI */
-#define WM8400_VROI_WIDTH                            1  /* VROI */
-
-/*
- * R56 (0x38) - AntiPOP1
- */
-#define WM8400_DIS_LLINE                        0x0020  /* DIS_LLINE */
-#define WM8400_DIS_LLINE_MASK                   0x0020  /* DIS_LLINE */
-#define WM8400_DIS_LLINE_SHIFT                       5  /* DIS_LLINE */
-#define WM8400_DIS_LLINE_WIDTH                       1  /* DIS_LLINE */
-#define WM8400_DIS_RLINE                        0x0010  /* DIS_RLINE */
-#define WM8400_DIS_RLINE_MASK                   0x0010  /* DIS_RLINE */
-#define WM8400_DIS_RLINE_SHIFT                       4  /* DIS_RLINE */
-#define WM8400_DIS_RLINE_WIDTH                       1  /* DIS_RLINE */
-#define WM8400_DIS_OUT3                         0x0008  /* DIS_OUT3 */
-#define WM8400_DIS_OUT3_MASK                    0x0008  /* DIS_OUT3 */
-#define WM8400_DIS_OUT3_SHIFT                        3  /* DIS_OUT3 */
-#define WM8400_DIS_OUT3_WIDTH                        1  /* DIS_OUT3 */
-#define WM8400_DIS_OUT4                         0x0004  /* DIS_OUT4 */
-#define WM8400_DIS_OUT4_MASK                    0x0004  /* DIS_OUT4 */
-#define WM8400_DIS_OUT4_SHIFT                        2  /* DIS_OUT4 */
-#define WM8400_DIS_OUT4_WIDTH                        1  /* DIS_OUT4 */
-#define WM8400_DIS_LOUT                         0x0002  /* DIS_LOUT */
-#define WM8400_DIS_LOUT_MASK                    0x0002  /* DIS_LOUT */
-#define WM8400_DIS_LOUT_SHIFT                        1  /* DIS_LOUT */
-#define WM8400_DIS_LOUT_WIDTH                        1  /* DIS_LOUT */
-#define WM8400_DIS_ROUT                         0x0001  /* DIS_ROUT */
-#define WM8400_DIS_ROUT_MASK                    0x0001  /* DIS_ROUT */
-#define WM8400_DIS_ROUT_SHIFT                        0  /* DIS_ROUT */
-#define WM8400_DIS_ROUT_WIDTH                        1  /* DIS_ROUT */
-
-/*
- * R57 (0x39) - AntiPOP2
- */
-#define WM8400_SOFTST                           0x0040  /* SOFTST */
-#define WM8400_SOFTST_MASK                      0x0040  /* SOFTST */
-#define WM8400_SOFTST_SHIFT                          6  /* SOFTST */
-#define WM8400_SOFTST_WIDTH                          1  /* SOFTST */
-#define WM8400_BUFIOEN                          0x0008  /* BUFIOEN */
-#define WM8400_BUFIOEN_MASK                     0x0008  /* BUFIOEN */
-#define WM8400_BUFIOEN_SHIFT                         3  /* BUFIOEN */
-#define WM8400_BUFIOEN_WIDTH                         1  /* BUFIOEN */
-#define WM8400_BUFDCOPEN                        0x0004  /* BUFDCOPEN */
-#define WM8400_BUFDCOPEN_MASK                   0x0004  /* BUFDCOPEN */
-#define WM8400_BUFDCOPEN_SHIFT                       2  /* BUFDCOPEN */
-#define WM8400_BUFDCOPEN_WIDTH                       1  /* BUFDCOPEN */
-#define WM8400_POBCTRL                          0x0002  /* POBCTRL */
-#define WM8400_POBCTRL_MASK                     0x0002  /* POBCTRL */
-#define WM8400_POBCTRL_SHIFT                         1  /* POBCTRL */
-#define WM8400_POBCTRL_WIDTH                         1  /* POBCTRL */
-#define WM8400_VMIDTOG                          0x0001  /* VMIDTOG */
-#define WM8400_VMIDTOG_MASK                     0x0001  /* VMIDTOG */
-#define WM8400_VMIDTOG_SHIFT                         0  /* VMIDTOG */
-#define WM8400_VMIDTOG_WIDTH                         1  /* VMIDTOG */
-
-/*
- * R58 (0x3A) - MICBIAS
- */
-#define WM8400_MCDSCTH_MASK                     0x00C0  /* MCDSCTH - [7:6] */
-#define WM8400_MCDSCTH_SHIFT                         6  /* MCDSCTH - [7:6] */
-#define WM8400_MCDSCTH_WIDTH                         2  /* MCDSCTH - [7:6] */
-#define WM8400_MCDTHR_MASK                      0x0038  /* MCDTHR - [5:3] */
-#define WM8400_MCDTHR_SHIFT                          3  /* MCDTHR - [5:3] */
-#define WM8400_MCDTHR_WIDTH                          3  /* MCDTHR - [5:3] */
-#define WM8400_MCD                              0x0004  /* MCD */
-#define WM8400_MCD_MASK                         0x0004  /* MCD */
-#define WM8400_MCD_SHIFT                             2  /* MCD */
-#define WM8400_MCD_WIDTH                             1  /* MCD */
-#define WM8400_MBSEL                            0x0001  /* MBSEL */
-#define WM8400_MBSEL_MASK                       0x0001  /* MBSEL */
-#define WM8400_MBSEL_SHIFT                           0  /* MBSEL */
-#define WM8400_MBSEL_WIDTH                           1  /* MBSEL */
-
-/*
- * R60 (0x3C) - FLL Control 1
- */
-#define WM8400_FLL_REF_FREQ                     0x1000  /* FLL_REF_FREQ */
-#define WM8400_FLL_REF_FREQ_MASK                0x1000  /* FLL_REF_FREQ */
-#define WM8400_FLL_REF_FREQ_SHIFT                   12  /* FLL_REF_FREQ */
-#define WM8400_FLL_REF_FREQ_WIDTH                    1  /* FLL_REF_FREQ */
-#define WM8400_FLL_CLK_SRC_MASK                 0x0C00  /* FLL_CLK_SRC - [11:10] */
-#define WM8400_FLL_CLK_SRC_SHIFT                    10  /* FLL_CLK_SRC - [11:10] */
-#define WM8400_FLL_CLK_SRC_WIDTH                     2  /* FLL_CLK_SRC - [11:10] */
-#define WM8400_FLL_FRAC                         0x0200  /* FLL_FRAC */
-#define WM8400_FLL_FRAC_MASK                    0x0200  /* FLL_FRAC */
-#define WM8400_FLL_FRAC_SHIFT                        9  /* FLL_FRAC */
-#define WM8400_FLL_FRAC_WIDTH                        1  /* FLL_FRAC */
-#define WM8400_FLL_OSC_ENA                      0x0100  /* FLL_OSC_ENA */
-#define WM8400_FLL_OSC_ENA_MASK                 0x0100  /* FLL_OSC_ENA */
-#define WM8400_FLL_OSC_ENA_SHIFT                     8  /* FLL_OSC_ENA */
-#define WM8400_FLL_OSC_ENA_WIDTH                     1  /* FLL_OSC_ENA */
-#define WM8400_FLL_CTRL_RATE_MASK               0x00E0  /* FLL_CTRL_RATE - [7:5] */
-#define WM8400_FLL_CTRL_RATE_SHIFT                   5  /* FLL_CTRL_RATE - [7:5] */
-#define WM8400_FLL_CTRL_RATE_WIDTH                   3  /* FLL_CTRL_RATE - [7:5] */
-#define WM8400_FLL_FRATIO_MASK                  0x001F  /* FLL_FRATIO - [4:0] */
-#define WM8400_FLL_FRATIO_SHIFT                      0  /* FLL_FRATIO - [4:0] */
-#define WM8400_FLL_FRATIO_WIDTH                      5  /* FLL_FRATIO - [4:0] */
-
-/*
- * R61 (0x3D) - FLL Control 2
- */
-#define WM8400_FLL_K_MASK                       0xFFFF  /* FLL_K - [15:0] */
-#define WM8400_FLL_K_SHIFT                           0  /* FLL_K - [15:0] */
-#define WM8400_FLL_K_WIDTH                          16  /* FLL_K - [15:0] */
-
-/*
- * R62 (0x3E) - FLL Control 3
- */
-#define WM8400_FLL_N_MASK                       0x03FF  /* FLL_N - [9:0] */
-#define WM8400_FLL_N_SHIFT                           0  /* FLL_N - [9:0] */
-#define WM8400_FLL_N_WIDTH                          10  /* FLL_N - [9:0] */
-
-/*
- * R63 (0x3F) - FLL Control 4
- */
-#define WM8400_FLL_TRK_GAIN_MASK                0x0078  /* FLL_TRK_GAIN - [6:3] */
-#define WM8400_FLL_TRK_GAIN_SHIFT                    3  /* FLL_TRK_GAIN - [6:3] */
-#define WM8400_FLL_TRK_GAIN_WIDTH                    4  /* FLL_TRK_GAIN - [6:3] */
-#define WM8400_FLL_OUTDIV_MASK                  0x0007  /* FLL_OUTDIV - [2:0] */
-#define WM8400_FLL_OUTDIV_SHIFT                      0  /* FLL_OUTDIV - [2:0] */
-#define WM8400_FLL_OUTDIV_WIDTH                      3  /* FLL_OUTDIV - [2:0] */
-
-struct wm8400;
-void wm8400_reset_codec_reg_cache(struct wm8400 *wm8400);
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/mfd/wm8400-private.h b/ANDROID_3.4.5/include/linux/mfd/wm8400-private.h
deleted file mode 100644
index 0147b696..00000000
--- a/ANDROID_3.4.5/include/linux/mfd/wm8400-private.h
+++ /dev/null
@@ -1,935 +0,0 @@
-/*
- * wm8400 private definitions.
- *
- * Copyright 2008 Wolfson Microelectronics plc
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __LINUX_MFD_WM8400_PRIV_H
-#define __LINUX_MFD_WM8400_PRIV_H
-
-#include <linux/mfd/wm8400.h>
-#include <linux/mutex.h>
-#include <linux/platform_device.h>
-
-struct regmap;
-
-#define WM8400_REGISTER_COUNT 0x55
-
-struct wm8400 {
-	struct device *dev;
-
-	struct mutex io_lock;
-	struct regmap *regmap;
-
-	u16 reg_cache[WM8400_REGISTER_COUNT];
-
-	struct platform_device regulators[6];
-};
-
-/*
- * Register values.
- */
-#define WM8400_RESET_ID                         0x00
-#define WM8400_ID                               0x01
-#define WM8400_POWER_MANAGEMENT_1               0x02
-#define WM8400_POWER_MANAGEMENT_2               0x03
-#define WM8400_POWER_MANAGEMENT_3               0x04
-#define WM8400_AUDIO_INTERFACE_1                0x05
-#define WM8400_AUDIO_INTERFACE_2                0x06
-#define WM8400_CLOCKING_1                       0x07
-#define WM8400_CLOCKING_2                       0x08
-#define WM8400_AUDIO_INTERFACE_3                0x09
-#define WM8400_AUDIO_INTERFACE_4                0x0A
-#define WM8400_DAC_CTRL                         0x0B
-#define WM8400_LEFT_DAC_DIGITAL_VOLUME          0x0C
-#define WM8400_RIGHT_DAC_DIGITAL_VOLUME         0x0D
-#define WM8400_DIGITAL_SIDE_TONE                0x0E
-#define WM8400_ADC_CTRL                         0x0F
-#define WM8400_LEFT_ADC_DIGITAL_VOLUME          0x10
-#define WM8400_RIGHT_ADC_DIGITAL_VOLUME         0x11
-#define WM8400_GPIO_CTRL_1                      0x12
-#define WM8400_GPIO1_GPIO2                      0x13
-#define WM8400_GPIO3_GPIO4                      0x14
-#define WM8400_GPIO5_GPIO6                      0x15
-#define WM8400_GPIOCTRL_2                       0x16
-#define WM8400_GPIO_POL                         0x17
-#define WM8400_LEFT_LINE_INPUT_1_2_VOLUME       0x18
-#define WM8400_LEFT_LINE_INPUT_3_4_VOLUME       0x19
-#define WM8400_RIGHT_LINE_INPUT_1_2_VOLUME      0x1A
-#define WM8400_RIGHT_LINE_INPUT_3_4_VOLUME      0x1B
-#define WM8400_LEFT_OUTPUT_VOLUME               0x1C
-#define WM8400_RIGHT_OUTPUT_VOLUME              0x1D
-#define WM8400_LINE_OUTPUTS_VOLUME              0x1E
-#define WM8400_OUT3_4_VOLUME                    0x1F
-#define WM8400_LEFT_OPGA_VOLUME                 0x20
-#define WM8400_RIGHT_OPGA_VOLUME                0x21
-#define WM8400_SPEAKER_VOLUME                   0x22
-#define WM8400_CLASSD1                          0x23
-#define WM8400_CLASSD3                          0x25
-#define WM8400_INPUT_MIXER1                     0x27
-#define WM8400_INPUT_MIXER2                     0x28
-#define WM8400_INPUT_MIXER3                     0x29
-#define WM8400_INPUT_MIXER4                     0x2A
-#define WM8400_INPUT_MIXER5                     0x2B
-#define WM8400_INPUT_MIXER6                     0x2C
-#define WM8400_OUTPUT_MIXER1                    0x2D
-#define WM8400_OUTPUT_MIXER2                    0x2E
-#define WM8400_OUTPUT_MIXER3                    0x2F
-#define WM8400_OUTPUT_MIXER4                    0x30
-#define WM8400_OUTPUT_MIXER5                    0x31
-#define WM8400_OUTPUT_MIXER6                    0x32
-#define WM8400_OUT3_4_MIXER                     0x33
-#define WM8400_LINE_MIXER1                      0x34
-#define WM8400_LINE_MIXER2                      0x35
-#define WM8400_SPEAKER_MIXER                    0x36
-#define WM8400_ADDITIONAL_CONTROL               0x37
-#define WM8400_ANTIPOP1                         0x38
-#define WM8400_ANTIPOP2                         0x39
-#define WM8400_MICBIAS                          0x3A
-#define WM8400_FLL_CONTROL_1                    0x3C
-#define WM8400_FLL_CONTROL_2                    0x3D
-#define WM8400_FLL_CONTROL_3                    0x3E
-#define WM8400_FLL_CONTROL_4                    0x3F
-#define WM8400_LDO1_CONTROL                     0x41
-#define WM8400_LDO2_CONTROL                     0x42
-#define WM8400_LDO3_CONTROL                     0x43
-#define WM8400_LDO4_CONTROL                     0x44
-#define WM8400_DCDC1_CONTROL_1                  0x46
-#define WM8400_DCDC1_CONTROL_2                  0x47
-#define WM8400_DCDC2_CONTROL_1                  0x48
-#define WM8400_DCDC2_CONTROL_2                  0x49
-#define WM8400_INTERFACE                        0x4B
-#define WM8400_PM_GENERAL                       0x4C
-#define WM8400_PM_SHUTDOWN_CONTROL              0x4E
-#define WM8400_INTERRUPT_STATUS_1               0x4F
-#define WM8400_INTERRUPT_STATUS_1_MASK          0x50
-#define WM8400_INTERRUPT_LEVELS                 0x51
-#define WM8400_SHUTDOWN_REASON                  0x52
-#define WM8400_LINE_CIRCUITS                    0x54
-
-/*
- * Field Definitions.
- */
-
-/*
- * R0 (0x00) - Reset/ID
- */
-#define WM8400_SW_RESET_CHIP_ID_MASK            0xFFFF  /* SW_RESET/CHIP_ID - [15:0] */
-#define WM8400_SW_RESET_CHIP_ID_SHIFT                0  /* SW_RESET/CHIP_ID - [15:0] */
-#define WM8400_SW_RESET_CHIP_ID_WIDTH               16  /* SW_RESET/CHIP_ID - [15:0] */
-
-/*
- * R1 (0x01) - ID
- */
-#define WM8400_CHIP_REV_MASK                    0x7000  /* CHIP_REV - [14:12] */
-#define WM8400_CHIP_REV_SHIFT                       12  /* CHIP_REV - [14:12] */
-#define WM8400_CHIP_REV_WIDTH                        3  /* CHIP_REV - [14:12] */
-
-/*
- * R18 (0x12) - GPIO CTRL 1
- */
-#define WM8400_IRQ                              0x1000  /* IRQ */
-#define WM8400_IRQ_MASK                         0x1000  /* IRQ */
-#define WM8400_IRQ_SHIFT                            12  /* IRQ */
-#define WM8400_IRQ_WIDTH                             1  /* IRQ */
-#define WM8400_TEMPOK                           0x0800  /* TEMPOK */
-#define WM8400_TEMPOK_MASK                      0x0800  /* TEMPOK */
-#define WM8400_TEMPOK_SHIFT                         11  /* TEMPOK */
-#define WM8400_TEMPOK_WIDTH                          1  /* TEMPOK */
-#define WM8400_MIC1SHRT                         0x0400  /* MIC1SHRT */
-#define WM8400_MIC1SHRT_MASK                    0x0400  /* MIC1SHRT */
-#define WM8400_MIC1SHRT_SHIFT                       10  /* MIC1SHRT */
-#define WM8400_MIC1SHRT_WIDTH                        1  /* MIC1SHRT */
-#define WM8400_MIC1DET                          0x0200  /* MIC1DET */
-#define WM8400_MIC1DET_MASK                     0x0200  /* MIC1DET */
-#define WM8400_MIC1DET_SHIFT                         9  /* MIC1DET */
-#define WM8400_MIC1DET_WIDTH                         1  /* MIC1DET */
-#define WM8400_FLL_LCK                          0x0100  /* FLL_LCK */
-#define WM8400_FLL_LCK_MASK                     0x0100  /* FLL_LCK */
-#define WM8400_FLL_LCK_SHIFT                         8  /* FLL_LCK */
-#define WM8400_FLL_LCK_WIDTH                         1  /* FLL_LCK */
-#define WM8400_GPIO_STATUS_MASK                 0x00FF  /* GPIO_STATUS - [7:0] */
-#define WM8400_GPIO_STATUS_SHIFT                     0  /* GPIO_STATUS - [7:0] */
-#define WM8400_GPIO_STATUS_WIDTH                     8  /* GPIO_STATUS - [7:0] */
-
-/*
- * R19 (0x13) - GPIO1 & GPIO2
- */
-#define WM8400_GPIO2_DEB_ENA                    0x8000  /* GPIO2_DEB_ENA */
-#define WM8400_GPIO2_DEB_ENA_MASK               0x8000  /* GPIO2_DEB_ENA */
-#define WM8400_GPIO2_DEB_ENA_SHIFT                  15  /* GPIO2_DEB_ENA */
-#define WM8400_GPIO2_DEB_ENA_WIDTH                   1  /* GPIO2_DEB_ENA */
-#define WM8400_GPIO2_IRQ_ENA                    0x4000  /* GPIO2_IRQ_ENA */
-#define WM8400_GPIO2_IRQ_ENA_MASK               0x4000  /* GPIO2_IRQ_ENA */
-#define WM8400_GPIO2_IRQ_ENA_SHIFT                  14  /* GPIO2_IRQ_ENA */
-#define WM8400_GPIO2_IRQ_ENA_WIDTH                   1  /* GPIO2_IRQ_ENA */
-#define WM8400_GPIO2_PU                         0x2000  /* GPIO2_PU */
-#define WM8400_GPIO2_PU_MASK                    0x2000  /* GPIO2_PU */
-#define WM8400_GPIO2_PU_SHIFT                       13  /* GPIO2_PU */
-#define WM8400_GPIO2_PU_WIDTH                        1  /* GPIO2_PU */
-#define WM8400_GPIO2_PD                         0x1000  /* GPIO2_PD */
-#define WM8400_GPIO2_PD_MASK                    0x1000  /* GPIO2_PD */
-#define WM8400_GPIO2_PD_SHIFT                       12  /* GPIO2_PD */
-#define WM8400_GPIO2_PD_WIDTH                        1  /* GPIO2_PD */
-#define WM8400_GPIO2_SEL_MASK                   0x0F00  /* GPIO2_SEL - [11:8] */
-#define WM8400_GPIO2_SEL_SHIFT                       8  /* GPIO2_SEL - [11:8] */
-#define WM8400_GPIO2_SEL_WIDTH                       4  /* GPIO2_SEL - [11:8] */
-#define WM8400_GPIO1_DEB_ENA                    0x0080  /* GPIO1_DEB_ENA */
-#define WM8400_GPIO1_DEB_ENA_MASK               0x0080  /* GPIO1_DEB_ENA */
-#define WM8400_GPIO1_DEB_ENA_SHIFT                   7  /* GPIO1_DEB_ENA */
-#define WM8400_GPIO1_DEB_ENA_WIDTH                   1  /* GPIO1_DEB_ENA */
-#define WM8400_GPIO1_IRQ_ENA                    0x0040  /* GPIO1_IRQ_ENA */
-#define WM8400_GPIO1_IRQ_ENA_MASK               0x0040  /* GPIO1_IRQ_ENA */
-#define WM8400_GPIO1_IRQ_ENA_SHIFT                   6  /* GPIO1_IRQ_ENA */
-#define WM8400_GPIO1_IRQ_ENA_WIDTH                   1  /* GPIO1_IRQ_ENA */
-#define WM8400_GPIO1_PU                         0x0020  /* GPIO1_PU */
-#define WM8400_GPIO1_PU_MASK                    0x0020  /* GPIO1_PU */
-#define WM8400_GPIO1_PU_SHIFT                        5  /* GPIO1_PU */
-#define WM8400_GPIO1_PU_WIDTH                        1  /* GPIO1_PU */
-#define WM8400_GPIO1_PD                         0x0010  /* GPIO1_PD */
-#define WM8400_GPIO1_PD_MASK                    0x0010  /* GPIO1_PD */
-#define WM8400_GPIO1_PD_SHIFT                        4  /* GPIO1_PD */
-#define WM8400_GPIO1_PD_WIDTH                        1  /* GPIO1_PD */
-#define WM8400_GPIO1_SEL_MASK                   0x000F  /* GPIO1_SEL - [3:0] */
-#define WM8400_GPIO1_SEL_SHIFT                       0  /* GPIO1_SEL - [3:0] */
-#define WM8400_GPIO1_SEL_WIDTH                       4  /* GPIO1_SEL - [3:0] */
-
-/*
- * R20 (0x14) - GPIO3 & GPIO4
- */
-#define WM8400_GPIO4_DEB_ENA                    0x8000  /* GPIO4_DEB_ENA */
-#define WM8400_GPIO4_DEB_ENA_MASK               0x8000  /* GPIO4_DEB_ENA */
-#define WM8400_GPIO4_DEB_ENA_SHIFT                  15  /* GPIO4_DEB_ENA */
-#define WM8400_GPIO4_DEB_ENA_WIDTH                   1  /* GPIO4_DEB_ENA */
-#define WM8400_GPIO4_IRQ_ENA                    0x4000  /* GPIO4_IRQ_ENA */
-#define WM8400_GPIO4_IRQ_ENA_MASK               0x4000  /* GPIO4_IRQ_ENA */
-#define WM8400_GPIO4_IRQ_ENA_SHIFT                  14  /* GPIO4_IRQ_ENA */
-#define WM8400_GPIO4_IRQ_ENA_WIDTH                   1  /* GPIO4_IRQ_ENA */
-#define WM8400_GPIO4_PU                         0x2000  /* GPIO4_PU */
-#define WM8400_GPIO4_PU_MASK                    0x2000  /* GPIO4_PU */
-#define WM8400_GPIO4_PU_SHIFT                       13  /* GPIO4_PU */
-#define WM8400_GPIO4_PU_WIDTH                        1  /* GPIO4_PU */
-#define WM8400_GPIO4_PD                         0x1000  /* GPIO4_PD */
-#define WM8400_GPIO4_PD_MASK                    0x1000  /* GPIO4_PD */
-#define WM8400_GPIO4_PD_SHIFT                       12  /* GPIO4_PD */
-#define WM8400_GPIO4_PD_WIDTH                        1  /* GPIO4_PD */
-#define WM8400_GPIO4_SEL_MASK                   0x0F00  /* GPIO4_SEL - [11:8] */
-#define WM8400_GPIO4_SEL_SHIFT                       8  /* GPIO4_SEL - [11:8] */
-#define WM8400_GPIO4_SEL_WIDTH                       4  /* GPIO4_SEL - [11:8] */
-#define WM8400_GPIO3_DEB_ENA                    0x0080  /* GPIO3_DEB_ENA */
-#define WM8400_GPIO3_DEB_ENA_MASK               0x0080  /* GPIO3_DEB_ENA */
-#define WM8400_GPIO3_DEB_ENA_SHIFT                   7  /* GPIO3_DEB_ENA */
-#define WM8400_GPIO3_DEB_ENA_WIDTH                   1  /* GPIO3_DEB_ENA */
-#define WM8400_GPIO3_IRQ_ENA                    0x0040  /* GPIO3_IRQ_ENA */
-#define WM8400_GPIO3_IRQ_ENA_MASK               0x0040  /* GPIO3_IRQ_ENA */
-#define WM8400_GPIO3_IRQ_ENA_SHIFT                   6  /* GPIO3_IRQ_ENA */
-#define WM8400_GPIO3_IRQ_ENA_WIDTH                   1  /* GPIO3_IRQ_ENA */
-#define WM8400_GPIO3_PU                         0x0020  /* GPIO3_PU */
-#define WM8400_GPIO3_PU_MASK                    0x0020  /* GPIO3_PU */
-#define WM8400_GPIO3_PU_SHIFT                        5  /* GPIO3_PU */
-#define WM8400_GPIO3_PU_WIDTH                        1  /* GPIO3_PU */
-#define WM8400_GPIO3_PD                         0x0010  /* GPIO3_PD */
-#define WM8400_GPIO3_PD_MASK                    0x0010  /* GPIO3_PD */
-#define WM8400_GPIO3_PD_SHIFT                        4  /* GPIO3_PD */
-#define WM8400_GPIO3_PD_WIDTH                        1  /* GPIO3_PD */
-#define WM8400_GPIO3_SEL_MASK                   0x000F  /* GPIO3_SEL - [3:0] */
-#define WM8400_GPIO3_SEL_SHIFT                       0  /* GPIO3_SEL - [3:0] */
-#define WM8400_GPIO3_SEL_WIDTH                       4  /* GPIO3_SEL - [3:0] */
-
-/*
- * R21 (0x15) - GPIO5 & GPIO6
- */
-#define WM8400_GPIO6_DEB_ENA                    0x8000  /* GPIO6_DEB_ENA */
-#define WM8400_GPIO6_DEB_ENA_MASK               0x8000  /* GPIO6_DEB_ENA */
-#define WM8400_GPIO6_DEB_ENA_SHIFT                  15  /* GPIO6_DEB_ENA */
-#define WM8400_GPIO6_DEB_ENA_WIDTH                   1  /* GPIO6_DEB_ENA */
-#define WM8400_GPIO6_IRQ_ENA                    0x4000  /* GPIO6_IRQ_ENA */
-#define WM8400_GPIO6_IRQ_ENA_MASK               0x4000  /* GPIO6_IRQ_ENA */
-#define WM8400_GPIO6_IRQ_ENA_SHIFT                  14  /* GPIO6_IRQ_ENA */
-#define WM8400_GPIO6_IRQ_ENA_WIDTH                   1  /* GPIO6_IRQ_ENA */
-#define WM8400_GPIO6_PU                         0x2000  /* GPIO6_PU */
-#define WM8400_GPIO6_PU_MASK                    0x2000  /* GPIO6_PU */
-#define WM8400_GPIO6_PU_SHIFT                       13  /* GPIO6_PU */
-#define WM8400_GPIO6_PU_WIDTH                        1  /* GPIO6_PU */
-#define WM8400_GPIO6_PD                         0x1000  /* GPIO6_PD */
-#define WM8400_GPIO6_PD_MASK                    0x1000  /* GPIO6_PD */
-#define WM8400_GPIO6_PD_SHIFT                       12  /* GPIO6_PD */
-#define WM8400_GPIO6_PD_WIDTH                        1  /* GPIO6_PD */
-#define WM8400_GPIO6_SEL_MASK                   0x0F00  /* GPIO6_SEL - [11:8] */
-#define WM8400_GPIO6_SEL_SHIFT                       8  /* GPIO6_SEL - [11:8] */
-#define WM8400_GPIO6_SEL_WIDTH                       4  /* GPIO6_SEL - [11:8] */
-#define WM8400_GPIO5_DEB_ENA                    0x0080  /* GPIO5_DEB_ENA */
-#define WM8400_GPIO5_DEB_ENA_MASK               0x0080  /* GPIO5_DEB_ENA */
-#define WM8400_GPIO5_DEB_ENA_SHIFT                   7  /* GPIO5_DEB_ENA */
-#define WM8400_GPIO5_DEB_ENA_WIDTH                   1  /* GPIO5_DEB_ENA */
-#define WM8400_GPIO5_IRQ_ENA                    0x0040  /* GPIO5_IRQ_ENA */
-#define WM8400_GPIO5_IRQ_ENA_MASK               0x0040  /* GPIO5_IRQ_ENA */
-#define WM8400_GPIO5_IRQ_ENA_SHIFT                   6  /* GPIO5_IRQ_ENA */
-#define WM8400_GPIO5_IRQ_ENA_WIDTH                   1  /* GPIO5_IRQ_ENA */
-#define WM8400_GPIO5_PU                         0x0020  /* GPIO5_PU */
-#define WM8400_GPIO5_PU_MASK                    0x0020  /* GPIO5_PU */
-#define WM8400_GPIO5_PU_SHIFT                        5  /* GPIO5_PU */
-#define WM8400_GPIO5_PU_WIDTH                        1  /* GPIO5_PU */
-#define WM8400_GPIO5_PD                         0x0010  /* GPIO5_PD */
-#define WM8400_GPIO5_PD_MASK                    0x0010  /* GPIO5_PD */
-#define WM8400_GPIO5_PD_SHIFT                        4  /* GPIO5_PD */
-#define WM8400_GPIO5_PD_WIDTH                        1  /* GPIO5_PD */
-#define WM8400_GPIO5_SEL_MASK                   0x000F  /* GPIO5_SEL - [3:0] */
-#define WM8400_GPIO5_SEL_SHIFT                       0  /* GPIO5_SEL - [3:0] */
-#define WM8400_GPIO5_SEL_WIDTH                       4  /* GPIO5_SEL - [3:0] */
-
-/*
- * R22 (0x16) - GPIOCTRL 2
- */
-#define WM8400_TEMPOK_IRQ_ENA                   0x0800  /* TEMPOK_IRQ_ENA */
-#define WM8400_TEMPOK_IRQ_ENA_MASK              0x0800  /* TEMPOK_IRQ_ENA */
-#define WM8400_TEMPOK_IRQ_ENA_SHIFT                 11  /* TEMPOK_IRQ_ENA */
-#define WM8400_TEMPOK_IRQ_ENA_WIDTH                  1  /* TEMPOK_IRQ_ENA */
-#define WM8400_MIC1SHRT_IRQ_ENA                 0x0400  /* MIC1SHRT_IRQ_ENA */
-#define WM8400_MIC1SHRT_IRQ_ENA_MASK            0x0400  /* MIC1SHRT_IRQ_ENA */
-#define WM8400_MIC1SHRT_IRQ_ENA_SHIFT               10  /* MIC1SHRT_IRQ_ENA */
-#define WM8400_MIC1SHRT_IRQ_ENA_WIDTH                1  /* MIC1SHRT_IRQ_ENA */
-#define WM8400_MIC1DET_IRQ_ENA                  0x0200  /* MIC1DET_IRQ_ENA */
-#define WM8400_MIC1DET_IRQ_ENA_MASK             0x0200  /* MIC1DET_IRQ_ENA */
-#define WM8400_MIC1DET_IRQ_ENA_SHIFT                 9  /* MIC1DET_IRQ_ENA */
-#define WM8400_MIC1DET_IRQ_ENA_WIDTH                 1  /* MIC1DET_IRQ_ENA */
-#define WM8400_FLL_LCK_IRQ_ENA                  0x0100  /* FLL_LCK_IRQ_ENA */
-#define WM8400_FLL_LCK_IRQ_ENA_MASK             0x0100  /* FLL_LCK_IRQ_ENA */
-#define WM8400_FLL_LCK_IRQ_ENA_SHIFT                 8  /* FLL_LCK_IRQ_ENA */
-#define WM8400_FLL_LCK_IRQ_ENA_WIDTH                 1  /* FLL_LCK_IRQ_ENA */
-#define WM8400_GPI8_DEB_ENA                     0x0080  /* GPI8_DEB_ENA */
-#define WM8400_GPI8_DEB_ENA_MASK                0x0080  /* GPI8_DEB_ENA */
-#define WM8400_GPI8_DEB_ENA_SHIFT                    7  /* GPI8_DEB_ENA */
-#define WM8400_GPI8_DEB_ENA_WIDTH                    1  /* GPI8_DEB_ENA */
-#define WM8400_GPI8_IRQ_ENA                     0x0040  /* GPI8_IRQ_ENA */
-#define WM8400_GPI8_IRQ_ENA_MASK                0x0040  /* GPI8_IRQ_ENA */
-#define WM8400_GPI8_IRQ_ENA_SHIFT                    6  /* GPI8_IRQ_ENA */
-#define WM8400_GPI8_IRQ_ENA_WIDTH                    1  /* GPI8_IRQ_ENA */
-#define WM8400_GPI8_ENA                         0x0010  /* GPI8_ENA */
-#define WM8400_GPI8_ENA_MASK                    0x0010  /* GPI8_ENA */
-#define WM8400_GPI8_ENA_SHIFT                        4  /* GPI8_ENA */
-#define WM8400_GPI8_ENA_WIDTH                        1  /* GPI8_ENA */
-#define WM8400_GPI7_DEB_ENA                     0x0008  /* GPI7_DEB_ENA */
-#define WM8400_GPI7_DEB_ENA_MASK                0x0008  /* GPI7_DEB_ENA */
-#define WM8400_GPI7_DEB_ENA_SHIFT                    3  /* GPI7_DEB_ENA */
-#define WM8400_GPI7_DEB_ENA_WIDTH                    1  /* GPI7_DEB_ENA */
-#define WM8400_GPI7_IRQ_ENA                     0x0004  /* GPI7_IRQ_ENA */
-#define WM8400_GPI7_IRQ_ENA_MASK                0x0004  /* GPI7_IRQ_ENA */
-#define WM8400_GPI7_IRQ_ENA_SHIFT                    2  /* GPI7_IRQ_ENA */
-#define WM8400_GPI7_IRQ_ENA_WIDTH                    1  /* GPI7_IRQ_ENA */
-#define WM8400_GPI7_ENA                         0x0001  /* GPI7_ENA */
-#define WM8400_GPI7_ENA_MASK                    0x0001  /* GPI7_ENA */
-#define WM8400_GPI7_ENA_SHIFT                        0  /* GPI7_ENA */
-#define WM8400_GPI7_ENA_WIDTH                        1  /* GPI7_ENA */
-
-/*
- * R23 (0x17) - GPIO_POL
- */
-#define WM8400_IRQ_INV                          0x1000  /* IRQ_INV */
-#define WM8400_IRQ_INV_MASK                     0x1000  /* IRQ_INV */
-#define WM8400_IRQ_INV_SHIFT                        12  /* IRQ_INV */
-#define WM8400_IRQ_INV_WIDTH                         1  /* IRQ_INV */
-#define WM8400_TEMPOK_POL                       0x0800  /* TEMPOK_POL */
-#define WM8400_TEMPOK_POL_MASK                  0x0800  /* TEMPOK_POL */
-#define WM8400_TEMPOK_POL_SHIFT                     11  /* TEMPOK_POL */
-#define WM8400_TEMPOK_POL_WIDTH                      1  /* TEMPOK_POL */
-#define WM8400_MIC1SHRT_POL                     0x0400  /* MIC1SHRT_POL */
-#define WM8400_MIC1SHRT_POL_MASK                0x0400  /* MIC1SHRT_POL */
-#define WM8400_MIC1SHRT_POL_SHIFT                   10  /* MIC1SHRT_POL */
-#define WM8400_MIC1SHRT_POL_WIDTH                    1  /* MIC1SHRT_POL */
-#define WM8400_MIC1DET_POL                      0x0200  /* MIC1DET_POL */
-#define WM8400_MIC1DET_POL_MASK                 0x0200  /* MIC1DET_POL */
-#define WM8400_MIC1DET_POL_SHIFT                     9  /* MIC1DET_POL */
-#define WM8400_MIC1DET_POL_WIDTH                     1  /* MIC1DET_POL */
-#define WM8400_FLL_LCK_POL                      0x0100  /* FLL_LCK_POL */
-#define WM8400_FLL_LCK_POL_MASK                 0x0100  /* FLL_LCK_POL */
-#define WM8400_FLL_LCK_POL_SHIFT                     8  /* FLL_LCK_POL */
-#define WM8400_FLL_LCK_POL_WIDTH                     1  /* FLL_LCK_POL */
-#define WM8400_GPIO_POL_MASK                    0x00FF  /* GPIO_POL - [7:0] */
-#define WM8400_GPIO_POL_SHIFT                        0  /* GPIO_POL - [7:0] */
-#define WM8400_GPIO_POL_WIDTH                        8  /* GPIO_POL - [7:0] */
-
-/*
- * R65 (0x41) - LDO 1 Control
- */
-#define WM8400_LDO1_ENA                         0x8000  /* LDO1_ENA */
-#define WM8400_LDO1_ENA_MASK                    0x8000  /* LDO1_ENA */
-#define WM8400_LDO1_ENA_SHIFT                       15  /* LDO1_ENA */
-#define WM8400_LDO1_ENA_WIDTH                        1  /* LDO1_ENA */
-#define WM8400_LDO1_SWI                         0x4000  /* LDO1_SWI */
-#define WM8400_LDO1_SWI_MASK                    0x4000  /* LDO1_SWI */
-#define WM8400_LDO1_SWI_SHIFT                       14  /* LDO1_SWI */
-#define WM8400_LDO1_SWI_WIDTH                        1  /* LDO1_SWI */
-#define WM8400_LDO1_OPFLT                       0x1000  /* LDO1_OPFLT */
-#define WM8400_LDO1_OPFLT_MASK                  0x1000  /* LDO1_OPFLT */
-#define WM8400_LDO1_OPFLT_SHIFT                     12  /* LDO1_OPFLT */
-#define WM8400_LDO1_OPFLT_WIDTH                      1  /* LDO1_OPFLT */
-#define WM8400_LDO1_ERRACT                      0x0800  /* LDO1_ERRACT */
-#define WM8400_LDO1_ERRACT_MASK                 0x0800  /* LDO1_ERRACT */
-#define WM8400_LDO1_ERRACT_SHIFT                    11  /* LDO1_ERRACT */
-#define WM8400_LDO1_ERRACT_WIDTH                     1  /* LDO1_ERRACT */
-#define WM8400_LDO1_HIB_MODE                    0x0400  /* LDO1_HIB_MODE */
-#define WM8400_LDO1_HIB_MODE_MASK               0x0400  /* LDO1_HIB_MODE */
-#define WM8400_LDO1_HIB_MODE_SHIFT                  10  /* LDO1_HIB_MODE */
-#define WM8400_LDO1_HIB_MODE_WIDTH                   1  /* LDO1_HIB_MODE */
-#define WM8400_LDO1_VIMG_MASK                   0x03E0  /* LDO1_VIMG - [9:5] */
-#define WM8400_LDO1_VIMG_SHIFT                       5  /* LDO1_VIMG - [9:5] */
-#define WM8400_LDO1_VIMG_WIDTH                       5  /* LDO1_VIMG - [9:5] */
-#define WM8400_LDO1_VSEL_MASK                   0x001F  /* LDO1_VSEL - [4:0] */
-#define WM8400_LDO1_VSEL_SHIFT                       0  /* LDO1_VSEL - [4:0] */
-#define WM8400_LDO1_VSEL_WIDTH                       5  /* LDO1_VSEL - [4:0] */
-
-/*
- * R66 (0x42) - LDO 2 Control
- */
-#define WM8400_LDO2_ENA                         0x8000  /* LDO2_ENA */
-#define WM8400_LDO2_ENA_MASK                    0x8000  /* LDO2_ENA */
-#define WM8400_LDO2_ENA_SHIFT                       15  /* LDO2_ENA */
-#define WM8400_LDO2_ENA_WIDTH                        1  /* LDO2_ENA */
-#define WM8400_LDO2_SWI                         0x4000  /* LDO2_SWI */
-#define WM8400_LDO2_SWI_MASK                    0x4000  /* LDO2_SWI */
-#define WM8400_LDO2_SWI_SHIFT                       14  /* LDO2_SWI */
-#define WM8400_LDO2_SWI_WIDTH                        1  /* LDO2_SWI */
-#define WM8400_LDO2_OPFLT                       0x1000  /* LDO2_OPFLT */
-#define WM8400_LDO2_OPFLT_MASK                  0x1000  /* LDO2_OPFLT */
-#define WM8400_LDO2_OPFLT_SHIFT                     12  /* LDO2_OPFLT */
-#define WM8400_LDO2_OPFLT_WIDTH                      1  /* LDO2_OPFLT */
-#define WM8400_LDO2_ERRACT                      0x0800  /* LDO2_ERRACT */
-#define WM8400_LDO2_ERRACT_MASK                 0x0800  /* LDO2_ERRACT */
-#define WM8400_LDO2_ERRACT_SHIFT                    11  /* LDO2_ERRACT */
-#define WM8400_LDO2_ERRACT_WIDTH                     1  /* LDO2_ERRACT */
-#define WM8400_LDO2_HIB_MODE                    0x0400  /* LDO2_HIB_MODE */
-#define WM8400_LDO2_HIB_MODE_MASK               0x0400  /* LDO2_HIB_MODE */
-#define WM8400_LDO2_HIB_MODE_SHIFT                  10  /* LDO2_HIB_MODE */
-#define WM8400_LDO2_HIB_MODE_WIDTH                   1  /* LDO2_HIB_MODE */
-#define WM8400_LDO2_VIMG_MASK                   0x03E0  /* LDO2_VIMG - [9:5] */
-#define WM8400_LDO2_VIMG_SHIFT                       5  /* LDO2_VIMG - [9:5] */
-#define WM8400_LDO2_VIMG_WIDTH                       5  /* LDO2_VIMG - [9:5] */
-#define WM8400_LDO2_VSEL_MASK                   0x001F  /* LDO2_VSEL - [4:0] */
-#define WM8400_LDO2_VSEL_SHIFT                       0  /* LDO2_VSEL - [4:0] */
-#define WM8400_LDO2_VSEL_WIDTH                       5  /* LDO2_VSEL - [4:0] */
-
-/*
- * R67 (0x43) - LDO 3 Control
- */
-#define WM8400_LDO3_ENA                         0x8000  /* LDO3_ENA */
-#define WM8400_LDO3_ENA_MASK                    0x8000  /* LDO3_ENA */
-#define WM8400_LDO3_ENA_SHIFT                       15  /* LDO3_ENA */
-#define WM8400_LDO3_ENA_WIDTH                        1  /* LDO3_ENA */
-#define WM8400_LDO3_SWI                         0x4000  /* LDO3_SWI */
-#define WM8400_LDO3_SWI_MASK                    0x4000  /* LDO3_SWI */
-#define WM8400_LDO3_SWI_SHIFT                       14  /* LDO3_SWI */
-#define WM8400_LDO3_SWI_WIDTH                        1  /* LDO3_SWI */
-#define WM8400_LDO3_OPFLT                       0x1000  /* LDO3_OPFLT */
-#define WM8400_LDO3_OPFLT_MASK                  0x1000  /* LDO3_OPFLT */
-#define WM8400_LDO3_OPFLT_SHIFT                     12  /* LDO3_OPFLT */
-#define WM8400_LDO3_OPFLT_WIDTH                      1  /* LDO3_OPFLT */
-#define WM8400_LDO3_ERRACT                      0x0800  /* LDO3_ERRACT */
-#define WM8400_LDO3_ERRACT_MASK                 0x0800  /* LDO3_ERRACT */
-#define WM8400_LDO3_ERRACT_SHIFT                    11  /* LDO3_ERRACT */
-#define WM8400_LDO3_ERRACT_WIDTH                     1  /* LDO3_ERRACT */
-#define WM8400_LDO3_HIB_MODE                    0x0400  /* LDO3_HIB_MODE */
-#define WM8400_LDO3_HIB_MODE_MASK               0x0400  /* LDO3_HIB_MODE */
-#define WM8400_LDO3_HIB_MODE_SHIFT                  10  /* LDO3_HIB_MODE */
-#define WM8400_LDO3_HIB_MODE_WIDTH                   1  /* LDO3_HIB_MODE */
-#define WM8400_LDO3_VIMG_MASK                   0x03E0  /* LDO3_VIMG - [9:5] */
-#define WM8400_LDO3_VIMG_SHIFT                       5  /* LDO3_VIMG - [9:5] */
-#define WM8400_LDO3_VIMG_WIDTH                       5  /* LDO3_VIMG - [9:5] */
-#define WM8400_LDO3_VSEL_MASK                   0x001F  /* LDO3_VSEL - [4:0] */
-#define WM8400_LDO3_VSEL_SHIFT                       0  /* LDO3_VSEL - [4:0] */
-#define WM8400_LDO3_VSEL_WIDTH                       5  /* LDO3_VSEL - [4:0] */
-
-/*
- * R68 (0x44) - LDO 4 Control
- */
-#define WM8400_LDO4_ENA                         0x8000  /* LDO4_ENA */
-#define WM8400_LDO4_ENA_MASK                    0x8000  /* LDO4_ENA */
-#define WM8400_LDO4_ENA_SHIFT                       15  /* LDO4_ENA */
-#define WM8400_LDO4_ENA_WIDTH                        1  /* LDO4_ENA */
-#define WM8400_LDO4_SWI                         0x4000  /* LDO4_SWI */
-#define WM8400_LDO4_SWI_MASK                    0x4000  /* LDO4_SWI */
-#define WM8400_LDO4_SWI_SHIFT                       14  /* LDO4_SWI */
-#define WM8400_LDO4_SWI_WIDTH                        1  /* LDO4_SWI */
-#define WM8400_LDO4_OPFLT                       0x1000  /* LDO4_OPFLT */
-#define WM8400_LDO4_OPFLT_MASK                  0x1000  /* LDO4_OPFLT */
-#define WM8400_LDO4_OPFLT_SHIFT                     12  /* LDO4_OPFLT */
-#define WM8400_LDO4_OPFLT_WIDTH                      1  /* LDO4_OPFLT */
-#define WM8400_LDO4_ERRACT                      0x0800  /* LDO4_ERRACT */
-#define WM8400_LDO4_ERRACT_MASK                 0x0800  /* LDO4_ERRACT */
-#define WM8400_LDO4_ERRACT_SHIFT                    11  /* LDO4_ERRACT */
-#define WM8400_LDO4_ERRACT_WIDTH                     1  /* LDO4_ERRACT */
-#define WM8400_LDO4_HIB_MODE                    0x0400  /* LDO4_HIB_MODE */
-#define WM8400_LDO4_HIB_MODE_MASK               0x0400  /* LDO4_HIB_MODE */
-#define WM8400_LDO4_HIB_MODE_SHIFT                  10  /* LDO4_HIB_MODE */
-#define WM8400_LDO4_HIB_MODE_WIDTH                   1  /* LDO4_HIB_MODE */
-#define WM8400_LDO4_VIMG_MASK                   0x03E0  /* LDO4_VIMG - [9:5] */
-#define WM8400_LDO4_VIMG_SHIFT                       5  /* LDO4_VIMG - [9:5] */
-#define WM8400_LDO4_VIMG_WIDTH                       5  /* LDO4_VIMG - [9:5] */
-#define WM8400_LDO4_VSEL_MASK                   0x001F  /* LDO4_VSEL - [4:0] */
-#define WM8400_LDO4_VSEL_SHIFT                       0  /* LDO4_VSEL - [4:0] */
-#define WM8400_LDO4_VSEL_WIDTH                       5  /* LDO4_VSEL - [4:0] */
-
-/*
- * R70 (0x46) - DCDC1 Control 1
- */
-#define WM8400_DC1_ENA                          0x8000  /* DC1_ENA */
-#define WM8400_DC1_ENA_MASK                     0x8000  /* DC1_ENA */
-#define WM8400_DC1_ENA_SHIFT                        15  /* DC1_ENA */
-#define WM8400_DC1_ENA_WIDTH                         1  /* DC1_ENA */
-#define WM8400_DC1_ACTIVE                       0x4000  /* DC1_ACTIVE */
-#define WM8400_DC1_ACTIVE_MASK                  0x4000  /* DC1_ACTIVE */
-#define WM8400_DC1_ACTIVE_SHIFT                     14  /* DC1_ACTIVE */
-#define WM8400_DC1_ACTIVE_WIDTH                      1  /* DC1_ACTIVE */
-#define WM8400_DC1_SLEEP                        0x2000  /* DC1_SLEEP */
-#define WM8400_DC1_SLEEP_MASK                   0x2000  /* DC1_SLEEP */
-#define WM8400_DC1_SLEEP_SHIFT                      13  /* DC1_SLEEP */
-#define WM8400_DC1_SLEEP_WIDTH                       1  /* DC1_SLEEP */
-#define WM8400_DC1_OPFLT                        0x1000  /* DC1_OPFLT */
-#define WM8400_DC1_OPFLT_MASK                   0x1000  /* DC1_OPFLT */
-#define WM8400_DC1_OPFLT_SHIFT                      12  /* DC1_OPFLT */
-#define WM8400_DC1_OPFLT_WIDTH                       1  /* DC1_OPFLT */
-#define WM8400_DC1_ERRACT                       0x0800  /* DC1_ERRACT */
-#define WM8400_DC1_ERRACT_MASK                  0x0800  /* DC1_ERRACT */
-#define WM8400_DC1_ERRACT_SHIFT                     11  /* DC1_ERRACT */
-#define WM8400_DC1_ERRACT_WIDTH                      1  /* DC1_ERRACT */
-#define WM8400_DC1_HIB_MODE                     0x0400  /* DC1_HIB_MODE */
-#define WM8400_DC1_HIB_MODE_MASK                0x0400  /* DC1_HIB_MODE */
-#define WM8400_DC1_HIB_MODE_SHIFT                   10  /* DC1_HIB_MODE */
-#define WM8400_DC1_HIB_MODE_WIDTH                    1  /* DC1_HIB_MODE */
-#define WM8400_DC1_SOFTST_MASK                  0x0300  /* DC1_SOFTST - [9:8] */
-#define WM8400_DC1_SOFTST_SHIFT                      8  /* DC1_SOFTST - [9:8] */
-#define WM8400_DC1_SOFTST_WIDTH                      2  /* DC1_SOFTST - [9:8] */
-#define WM8400_DC1_OV_PROT                      0x0080  /* DC1_OV_PROT */
-#define WM8400_DC1_OV_PROT_MASK                 0x0080  /* DC1_OV_PROT */
-#define WM8400_DC1_OV_PROT_SHIFT                     7  /* DC1_OV_PROT */
-#define WM8400_DC1_OV_PROT_WIDTH                     1  /* DC1_OV_PROT */
-#define WM8400_DC1_VSEL_MASK                    0x007F  /* DC1_VSEL - [6:0] */
-#define WM8400_DC1_VSEL_SHIFT                        0  /* DC1_VSEL - [6:0] */
-#define WM8400_DC1_VSEL_WIDTH                        7  /* DC1_VSEL - [6:0] */
-
-/*
- * R71 (0x47) - DCDC1 Control 2
- */
-#define WM8400_DC1_FRC_PWM                      0x2000  /* DC1_FRC_PWM */
-#define WM8400_DC1_FRC_PWM_MASK                 0x2000  /* DC1_FRC_PWM */
-#define WM8400_DC1_FRC_PWM_SHIFT                    13  /* DC1_FRC_PWM */
-#define WM8400_DC1_FRC_PWM_WIDTH                     1  /* DC1_FRC_PWM */
-#define WM8400_DC1_STBY_LIM_MASK                0x0300  /* DC1_STBY_LIM - [9:8] */
-#define WM8400_DC1_STBY_LIM_SHIFT                    8  /* DC1_STBY_LIM - [9:8] */
-#define WM8400_DC1_STBY_LIM_WIDTH                    2  /* DC1_STBY_LIM - [9:8] */
-#define WM8400_DC1_ACT_LIM                      0x0080  /* DC1_ACT_LIM */
-#define WM8400_DC1_ACT_LIM_MASK                 0x0080  /* DC1_ACT_LIM */
-#define WM8400_DC1_ACT_LIM_SHIFT                     7  /* DC1_ACT_LIM */
-#define WM8400_DC1_ACT_LIM_WIDTH                     1  /* DC1_ACT_LIM */
-#define WM8400_DC1_VIMG_MASK                    0x007F  /* DC1_VIMG - [6:0] */
-#define WM8400_DC1_VIMG_SHIFT                        0  /* DC1_VIMG - [6:0] */
-#define WM8400_DC1_VIMG_WIDTH                        7  /* DC1_VIMG - [6:0] */
-
-/*
- * R72 (0x48) - DCDC2 Control 1
- */
-#define WM8400_DC2_ENA                          0x8000  /* DC2_ENA */
-#define WM8400_DC2_ENA_MASK                     0x8000  /* DC2_ENA */
-#define WM8400_DC2_ENA_SHIFT                        15  /* DC2_ENA */
-#define WM8400_DC2_ENA_WIDTH                         1  /* DC2_ENA */
-#define WM8400_DC2_ACTIVE                       0x4000  /* DC2_ACTIVE */
-#define WM8400_DC2_ACTIVE_MASK                  0x4000  /* DC2_ACTIVE */
-#define WM8400_DC2_ACTIVE_SHIFT                     14  /* DC2_ACTIVE */
-#define WM8400_DC2_ACTIVE_WIDTH                      1  /* DC2_ACTIVE */
-#define WM8400_DC2_SLEEP                        0x2000  /* DC2_SLEEP */
-#define WM8400_DC2_SLEEP_MASK                   0x2000  /* DC2_SLEEP */
-#define WM8400_DC2_SLEEP_SHIFT                      13  /* DC2_SLEEP */
-#define WM8400_DC2_SLEEP_WIDTH                       1  /* DC2_SLEEP */
-#define WM8400_DC2_OPFLT                        0x1000  /* DC2_OPFLT */
-#define WM8400_DC2_OPFLT_MASK                   0x1000  /* DC2_OPFLT */
-#define WM8400_DC2_OPFLT_SHIFT                      12  /* DC2_OPFLT */
-#define WM8400_DC2_OPFLT_WIDTH                       1  /* DC2_OPFLT */
-#define WM8400_DC2_ERRACT                       0x0800  /* DC2_ERRACT */
-#define WM8400_DC2_ERRACT_MASK                  0x0800  /* DC2_ERRACT */
-#define WM8400_DC2_ERRACT_SHIFT                     11  /* DC2_ERRACT */
-#define WM8400_DC2_ERRACT_WIDTH                      1  /* DC2_ERRACT */
-#define WM8400_DC2_HIB_MODE                     0x0400  /* DC2_HIB_MODE */
-#define WM8400_DC2_HIB_MODE_MASK                0x0400  /* DC2_HIB_MODE */
-#define WM8400_DC2_HIB_MODE_SHIFT                   10  /* DC2_HIB_MODE */
-#define WM8400_DC2_HIB_MODE_WIDTH                    1  /* DC2_HIB_MODE */
-#define WM8400_DC2_SOFTST_MASK                  0x0300  /* DC2_SOFTST - [9:8] */
-#define WM8400_DC2_SOFTST_SHIFT                      8  /* DC2_SOFTST - [9:8] */
-#define WM8400_DC2_SOFTST_WIDTH                      2  /* DC2_SOFTST - [9:8] */
-#define WM8400_DC2_OV_PROT                      0x0080  /* DC2_OV_PROT */
-#define WM8400_DC2_OV_PROT_MASK                 0x0080  /* DC2_OV_PROT */
-#define WM8400_DC2_OV_PROT_SHIFT                     7  /* DC2_OV_PROT */
-#define WM8400_DC2_OV_PROT_WIDTH                     1  /* DC2_OV_PROT */
-#define WM8400_DC2_VSEL_MASK                    0x007F  /* DC2_VSEL - [6:0] */
-#define WM8400_DC2_VSEL_SHIFT                        0  /* DC2_VSEL - [6:0] */
-#define WM8400_DC2_VSEL_WIDTH                        7  /* DC2_VSEL - [6:0] */
-
-/*
- * R73 (0x49) - DCDC2 Control 2
- */
-#define WM8400_DC2_FRC_PWM                      0x2000  /* DC2_FRC_PWM */
-#define WM8400_DC2_FRC_PWM_MASK                 0x2000  /* DC2_FRC_PWM */
-#define WM8400_DC2_FRC_PWM_SHIFT                    13  /* DC2_FRC_PWM */
-#define WM8400_DC2_FRC_PWM_WIDTH                     1  /* DC2_FRC_PWM */
-#define WM8400_DC2_STBY_LIM_MASK                0x0300  /* DC2_STBY_LIM - [9:8] */
-#define WM8400_DC2_STBY_LIM_SHIFT                    8  /* DC2_STBY_LIM - [9:8] */
-#define WM8400_DC2_STBY_LIM_WIDTH                    2  /* DC2_STBY_LIM - [9:8] */
-#define WM8400_DC2_ACT_LIM                      0x0080  /* DC2_ACT_LIM */
-#define WM8400_DC2_ACT_LIM_MASK                 0x0080  /* DC2_ACT_LIM */
-#define WM8400_DC2_ACT_LIM_SHIFT                     7  /* DC2_ACT_LIM */
-#define WM8400_DC2_ACT_LIM_WIDTH                     1  /* DC2_ACT_LIM */
-#define WM8400_DC2_VIMG_MASK                    0x007F  /* DC2_VIMG - [6:0] */
-#define WM8400_DC2_VIMG_SHIFT                        0  /* DC2_VIMG - [6:0] */
-#define WM8400_DC2_VIMG_WIDTH                        7  /* DC2_VIMG - [6:0] */
-
-/*
- * R75 (0x4B) - Interface
- */
-#define WM8400_AUTOINC                          0x0008  /* AUTOINC */
-#define WM8400_AUTOINC_MASK                     0x0008  /* AUTOINC */
-#define WM8400_AUTOINC_SHIFT                         3  /* AUTOINC */
-#define WM8400_AUTOINC_WIDTH                         1  /* AUTOINC */
-#define WM8400_ARA_ENA                          0x0004  /* ARA_ENA */
-#define WM8400_ARA_ENA_MASK                     0x0004  /* ARA_ENA */
-#define WM8400_ARA_ENA_SHIFT                         2  /* ARA_ENA */
-#define WM8400_ARA_ENA_WIDTH                         1  /* ARA_ENA */
-#define WM8400_SPI_CFG                          0x0002  /* SPI_CFG */
-#define WM8400_SPI_CFG_MASK                     0x0002  /* SPI_CFG */
-#define WM8400_SPI_CFG_SHIFT                         1  /* SPI_CFG */
-#define WM8400_SPI_CFG_WIDTH                         1  /* SPI_CFG */
-
-/*
- * R76 (0x4C) - PM GENERAL
- */
-#define WM8400_CODEC_SOFTST                     0x8000  /* CODEC_SOFTST */
-#define WM8400_CODEC_SOFTST_MASK                0x8000  /* CODEC_SOFTST */
-#define WM8400_CODEC_SOFTST_SHIFT                   15  /* CODEC_SOFTST */
-#define WM8400_CODEC_SOFTST_WIDTH                    1  /* CODEC_SOFTST */
-#define WM8400_CODEC_SOFTSD                     0x4000  /* CODEC_SOFTSD */
-#define WM8400_CODEC_SOFTSD_MASK                0x4000  /* CODEC_SOFTSD */
-#define WM8400_CODEC_SOFTSD_SHIFT                   14  /* CODEC_SOFTSD */
-#define WM8400_CODEC_SOFTSD_WIDTH                    1  /* CODEC_SOFTSD */
-#define WM8400_CHIP_SOFTSD                      0x2000  /* CHIP_SOFTSD */
-#define WM8400_CHIP_SOFTSD_MASK                 0x2000  /* CHIP_SOFTSD */
-#define WM8400_CHIP_SOFTSD_SHIFT                    13  /* CHIP_SOFTSD */
-#define WM8400_CHIP_SOFTSD_WIDTH                     1  /* CHIP_SOFTSD */
-#define WM8400_DSLEEP1_POL                      0x0008  /* DSLEEP1_POL */
-#define WM8400_DSLEEP1_POL_MASK                 0x0008  /* DSLEEP1_POL */
-#define WM8400_DSLEEP1_POL_SHIFT                     3  /* DSLEEP1_POL */
-#define WM8400_DSLEEP1_POL_WIDTH                     1  /* DSLEEP1_POL */
-#define WM8400_DSLEEP2_POL                      0x0004  /* DSLEEP2_POL */
-#define WM8400_DSLEEP2_POL_MASK                 0x0004  /* DSLEEP2_POL */
-#define WM8400_DSLEEP2_POL_SHIFT                     2  /* DSLEEP2_POL */
-#define WM8400_DSLEEP2_POL_WIDTH                     1  /* DSLEEP2_POL */
-#define WM8400_PWR_STATE_MASK                   0x0003  /* PWR_STATE - [1:0] */
-#define WM8400_PWR_STATE_SHIFT                       0  /* PWR_STATE - [1:0] */
-#define WM8400_PWR_STATE_WIDTH                       2  /* PWR_STATE - [1:0] */
-
-/*
- * R78 (0x4E) - PM Shutdown Control
- */
-#define WM8400_CHIP_GT150_ERRACT                0x0200  /* CHIP_GT150_ERRACT */
-#define WM8400_CHIP_GT150_ERRACT_MASK           0x0200  /* CHIP_GT150_ERRACT */
-#define WM8400_CHIP_GT150_ERRACT_SHIFT               9  /* CHIP_GT150_ERRACT */
-#define WM8400_CHIP_GT150_ERRACT_WIDTH               1  /* CHIP_GT150_ERRACT */
-#define WM8400_CHIP_GT115_ERRACT                0x0100  /* CHIP_GT115_ERRACT */
-#define WM8400_CHIP_GT115_ERRACT_MASK           0x0100  /* CHIP_GT115_ERRACT */
-#define WM8400_CHIP_GT115_ERRACT_SHIFT               8  /* CHIP_GT115_ERRACT */
-#define WM8400_CHIP_GT115_ERRACT_WIDTH               1  /* CHIP_GT115_ERRACT */
-#define WM8400_LINE_CMP_ERRACT                  0x0080  /* LINE_CMP_ERRACT */
-#define WM8400_LINE_CMP_ERRACT_MASK             0x0080  /* LINE_CMP_ERRACT */
-#define WM8400_LINE_CMP_ERRACT_SHIFT                 7  /* LINE_CMP_ERRACT */
-#define WM8400_LINE_CMP_ERRACT_WIDTH                 1  /* LINE_CMP_ERRACT */
-#define WM8400_UVLO_ERRACT                      0x0040  /* UVLO_ERRACT */
-#define WM8400_UVLO_ERRACT_MASK                 0x0040  /* UVLO_ERRACT */
-#define WM8400_UVLO_ERRACT_SHIFT                     6  /* UVLO_ERRACT */
-#define WM8400_UVLO_ERRACT_WIDTH                     1  /* UVLO_ERRACT */
-
-/*
- * R79 (0x4F) - Interrupt Status 1
- */
-#define WM8400_MICD_CINT                        0x8000  /* MICD_CINT */
-#define WM8400_MICD_CINT_MASK                   0x8000  /* MICD_CINT */
-#define WM8400_MICD_CINT_SHIFT                      15  /* MICD_CINT */
-#define WM8400_MICD_CINT_WIDTH                       1  /* MICD_CINT */
-#define WM8400_MICSCD_CINT                      0x4000  /* MICSCD_CINT */
-#define WM8400_MICSCD_CINT_MASK                 0x4000  /* MICSCD_CINT */
-#define WM8400_MICSCD_CINT_SHIFT                    14  /* MICSCD_CINT */
-#define WM8400_MICSCD_CINT_WIDTH                     1  /* MICSCD_CINT */
-#define WM8400_JDL_CINT                         0x2000  /* JDL_CINT */
-#define WM8400_JDL_CINT_MASK                    0x2000  /* JDL_CINT */
-#define WM8400_JDL_CINT_SHIFT                       13  /* JDL_CINT */
-#define WM8400_JDL_CINT_WIDTH                        1  /* JDL_CINT */
-#define WM8400_JDR_CINT                         0x1000  /* JDR_CINT */
-#define WM8400_JDR_CINT_MASK                    0x1000  /* JDR_CINT */
-#define WM8400_JDR_CINT_SHIFT                       12  /* JDR_CINT */
-#define WM8400_JDR_CINT_WIDTH                        1  /* JDR_CINT */
-#define WM8400_CODEC_SEQ_END_EINT               0x0800  /* CODEC_SEQ_END_EINT */
-#define WM8400_CODEC_SEQ_END_EINT_MASK          0x0800  /* CODEC_SEQ_END_EINT */
-#define WM8400_CODEC_SEQ_END_EINT_SHIFT             11  /* CODEC_SEQ_END_EINT */
-#define WM8400_CODEC_SEQ_END_EINT_WIDTH              1  /* CODEC_SEQ_END_EINT */
-#define WM8400_CDEL_TO_EINT                     0x0400  /* CDEL_TO_EINT */
-#define WM8400_CDEL_TO_EINT_MASK                0x0400  /* CDEL_TO_EINT */
-#define WM8400_CDEL_TO_EINT_SHIFT                   10  /* CDEL_TO_EINT */
-#define WM8400_CDEL_TO_EINT_WIDTH                    1  /* CDEL_TO_EINT */
-#define WM8400_CHIP_GT150_EINT                  0x0200  /* CHIP_GT150_EINT */
-#define WM8400_CHIP_GT150_EINT_MASK             0x0200  /* CHIP_GT150_EINT */
-#define WM8400_CHIP_GT150_EINT_SHIFT                 9  /* CHIP_GT150_EINT */
-#define WM8400_CHIP_GT150_EINT_WIDTH                 1  /* CHIP_GT150_EINT */
-#define WM8400_CHIP_GT115_EINT                  0x0100  /* CHIP_GT115_EINT */
-#define WM8400_CHIP_GT115_EINT_MASK             0x0100  /* CHIP_GT115_EINT */
-#define WM8400_CHIP_GT115_EINT_SHIFT                 8  /* CHIP_GT115_EINT */
-#define WM8400_CHIP_GT115_EINT_WIDTH                 1  /* CHIP_GT115_EINT */
-#define WM8400_LINE_CMP_EINT                    0x0080  /* LINE_CMP_EINT */
-#define WM8400_LINE_CMP_EINT_MASK               0x0080  /* LINE_CMP_EINT */
-#define WM8400_LINE_CMP_EINT_SHIFT                   7  /* LINE_CMP_EINT */
-#define WM8400_LINE_CMP_EINT_WIDTH                   1  /* LINE_CMP_EINT */
-#define WM8400_UVLO_EINT                        0x0040  /* UVLO_EINT */
-#define WM8400_UVLO_EINT_MASK                   0x0040  /* UVLO_EINT */
-#define WM8400_UVLO_EINT_SHIFT                       6  /* UVLO_EINT */
-#define WM8400_UVLO_EINT_WIDTH                       1  /* UVLO_EINT */
-#define WM8400_DC2_UV_EINT                      0x0020  /* DC2_UV_EINT */
-#define WM8400_DC2_UV_EINT_MASK                 0x0020  /* DC2_UV_EINT */
-#define WM8400_DC2_UV_EINT_SHIFT                     5  /* DC2_UV_EINT */
-#define WM8400_DC2_UV_EINT_WIDTH                     1  /* DC2_UV_EINT */
-#define WM8400_DC1_UV_EINT                      0x0010  /* DC1_UV_EINT */
-#define WM8400_DC1_UV_EINT_MASK                 0x0010  /* DC1_UV_EINT */
-#define WM8400_DC1_UV_EINT_SHIFT                     4  /* DC1_UV_EINT */
-#define WM8400_DC1_UV_EINT_WIDTH                     1  /* DC1_UV_EINT */
-#define WM8400_LDO4_UV_EINT                     0x0008  /* LDO4_UV_EINT */
-#define WM8400_LDO4_UV_EINT_MASK                0x0008  /* LDO4_UV_EINT */
-#define WM8400_LDO4_UV_EINT_SHIFT                    3  /* LDO4_UV_EINT */
-#define WM8400_LDO4_UV_EINT_WIDTH                    1  /* LDO4_UV_EINT */
-#define WM8400_LDO3_UV_EINT                     0x0004  /* LDO3_UV_EINT */
-#define WM8400_LDO3_UV_EINT_MASK                0x0004  /* LDO3_UV_EINT */
-#define WM8400_LDO3_UV_EINT_SHIFT                    2  /* LDO3_UV_EINT */
-#define WM8400_LDO3_UV_EINT_WIDTH                    1  /* LDO3_UV_EINT */
-#define WM8400_LDO2_UV_EINT                     0x0002  /* LDO2_UV_EINT */
-#define WM8400_LDO2_UV_EINT_MASK                0x0002  /* LDO2_UV_EINT */
-#define WM8400_LDO2_UV_EINT_SHIFT                    1  /* LDO2_UV_EINT */
-#define WM8400_LDO2_UV_EINT_WIDTH                    1  /* LDO2_UV_EINT */
-#define WM8400_LDO1_UV_EINT                     0x0001  /* LDO1_UV_EINT */
-#define WM8400_LDO1_UV_EINT_MASK                0x0001  /* LDO1_UV_EINT */
-#define WM8400_LDO1_UV_EINT_SHIFT                    0  /* LDO1_UV_EINT */
-#define WM8400_LDO1_UV_EINT_WIDTH                    1  /* LDO1_UV_EINT */
-
-/*
- * R80 (0x50) - Interrupt Status 1 Mask
- */
-#define WM8400_IM_MICD_CINT                     0x8000  /* IM_MICD_CINT */
-#define WM8400_IM_MICD_CINT_MASK                0x8000  /* IM_MICD_CINT */
-#define WM8400_IM_MICD_CINT_SHIFT                   15  /* IM_MICD_CINT */
-#define WM8400_IM_MICD_CINT_WIDTH                    1  /* IM_MICD_CINT */
-#define WM8400_IM_MICSCD_CINT                   0x4000  /* IM_MICSCD_CINT */
-#define WM8400_IM_MICSCD_CINT_MASK              0x4000  /* IM_MICSCD_CINT */
-#define WM8400_IM_MICSCD_CINT_SHIFT                 14  /* IM_MICSCD_CINT */
-#define WM8400_IM_MICSCD_CINT_WIDTH                  1  /* IM_MICSCD_CINT */
-#define WM8400_IM_JDL_CINT                      0x2000  /* IM_JDL_CINT */
-#define WM8400_IM_JDL_CINT_MASK                 0x2000  /* IM_JDL_CINT */
-#define WM8400_IM_JDL_CINT_SHIFT                    13  /* IM_JDL_CINT */
-#define WM8400_IM_JDL_CINT_WIDTH                     1  /* IM_JDL_CINT */
-#define WM8400_IM_JDR_CINT                      0x1000  /* IM_JDR_CINT */
-#define WM8400_IM_JDR_CINT_MASK                 0x1000  /* IM_JDR_CINT */
-#define WM8400_IM_JDR_CINT_SHIFT                    12  /* IM_JDR_CINT */
-#define WM8400_IM_JDR_CINT_WIDTH                     1  /* IM_JDR_CINT */
-#define WM8400_IM_CODEC_SEQ_END_EINT            0x0800  /* IM_CODEC_SEQ_END_EINT */
-#define WM8400_IM_CODEC_SEQ_END_EINT_MASK       0x0800  /* IM_CODEC_SEQ_END_EINT */
-#define WM8400_IM_CODEC_SEQ_END_EINT_SHIFT          11  /* IM_CODEC_SEQ_END_EINT */
-#define WM8400_IM_CODEC_SEQ_END_EINT_WIDTH           1  /* IM_CODEC_SEQ_END_EINT */
-#define WM8400_IM_CDEL_TO_EINT                  0x0400  /* IM_CDEL_TO_EINT */
-#define WM8400_IM_CDEL_TO_EINT_MASK             0x0400  /* IM_CDEL_TO_EINT */
-#define WM8400_IM_CDEL_TO_EINT_SHIFT                10  /* IM_CDEL_TO_EINT */
-#define WM8400_IM_CDEL_TO_EINT_WIDTH                 1  /* IM_CDEL_TO_EINT */
-#define WM8400_IM_CHIP_GT150_EINT               0x0200  /* IM_CHIP_GT150_EINT */
-#define WM8400_IM_CHIP_GT150_EINT_MASK          0x0200  /* IM_CHIP_GT150_EINT */
-#define WM8400_IM_CHIP_GT150_EINT_SHIFT              9  /* IM_CHIP_GT150_EINT */
-#define WM8400_IM_CHIP_GT150_EINT_WIDTH              1  /* IM_CHIP_GT150_EINT */
-#define WM8400_IM_CHIP_GT115_EINT               0x0100  /* IM_CHIP_GT115_EINT */
-#define WM8400_IM_CHIP_GT115_EINT_MASK          0x0100  /* IM_CHIP_GT115_EINT */
-#define WM8400_IM_CHIP_GT115_EINT_SHIFT              8  /* IM_CHIP_GT115_EINT */
-#define WM8400_IM_CHIP_GT115_EINT_WIDTH              1  /* IM_CHIP_GT115_EINT */
-#define WM8400_IM_LINE_CMP_EINT                 0x0080  /* IM_LINE_CMP_EINT */
-#define WM8400_IM_LINE_CMP_EINT_MASK            0x0080  /* IM_LINE_CMP_EINT */
-#define WM8400_IM_LINE_CMP_EINT_SHIFT                7  /* IM_LINE_CMP_EINT */
-#define WM8400_IM_LINE_CMP_EINT_WIDTH                1  /* IM_LINE_CMP_EINT */
-#define WM8400_IM_UVLO_EINT                     0x0040  /* IM_UVLO_EINT */
-#define WM8400_IM_UVLO_EINT_MASK                0x0040  /* IM_UVLO_EINT */
-#define WM8400_IM_UVLO_EINT_SHIFT                    6  /* IM_UVLO_EINT */
-#define WM8400_IM_UVLO_EINT_WIDTH                    1  /* IM_UVLO_EINT */
-#define WM8400_IM_DC2_UV_EINT                   0x0020  /* IM_DC2_UV_EINT */
-#define WM8400_IM_DC2_UV_EINT_MASK              0x0020  /* IM_DC2_UV_EINT */
-#define WM8400_IM_DC2_UV_EINT_SHIFT                  5  /* IM_DC2_UV_EINT */
-#define WM8400_IM_DC2_UV_EINT_WIDTH                  1  /* IM_DC2_UV_EINT */
-#define WM8400_IM_DC1_UV_EINT                   0x0010  /* IM_DC1_UV_EINT */
-#define WM8400_IM_DC1_UV_EINT_MASK              0x0010  /* IM_DC1_UV_EINT */
-#define WM8400_IM_DC1_UV_EINT_SHIFT                  4  /* IM_DC1_UV_EINT */
-#define WM8400_IM_DC1_UV_EINT_WIDTH                  1  /* IM_DC1_UV_EINT */
-#define WM8400_IM_LDO4_UV_EINT                  0x0008  /* IM_LDO4_UV_EINT */
-#define WM8400_IM_LDO4_UV_EINT_MASK             0x0008  /* IM_LDO4_UV_EINT */
-#define WM8400_IM_LDO4_UV_EINT_SHIFT                 3  /* IM_LDO4_UV_EINT */
-#define WM8400_IM_LDO4_UV_EINT_WIDTH                 1  /* IM_LDO4_UV_EINT */
-#define WM8400_IM_LDO3_UV_EINT                  0x0004  /* IM_LDO3_UV_EINT */
-#define WM8400_IM_LDO3_UV_EINT_MASK             0x0004  /* IM_LDO3_UV_EINT */
-#define WM8400_IM_LDO3_UV_EINT_SHIFT                 2  /* IM_LDO3_UV_EINT */
-#define WM8400_IM_LDO3_UV_EINT_WIDTH                 1  /* IM_LDO3_UV_EINT */
-#define WM8400_IM_LDO2_UV_EINT                  0x0002  /* IM_LDO2_UV_EINT */
-#define WM8400_IM_LDO2_UV_EINT_MASK             0x0002  /* IM_LDO2_UV_EINT */
-#define WM8400_IM_LDO2_UV_EINT_SHIFT                 1  /* IM_LDO2_UV_EINT */
-#define WM8400_IM_LDO2_UV_EINT_WIDTH                 1  /* IM_LDO2_UV_EINT */
-#define WM8400_IM_LDO1_UV_EINT                  0x0001  /* IM_LDO1_UV_EINT */
-#define WM8400_IM_LDO1_UV_EINT_MASK             0x0001  /* IM_LDO1_UV_EINT */
-#define WM8400_IM_LDO1_UV_EINT_SHIFT                 0  /* IM_LDO1_UV_EINT */
-#define WM8400_IM_LDO1_UV_EINT_WIDTH                 1  /* IM_LDO1_UV_EINT */
-
-/*
- * R81 (0x51) - Interrupt Levels
- */
-#define WM8400_MICD_LVL                         0x8000  /* MICD_LVL */
-#define WM8400_MICD_LVL_MASK                    0x8000  /* MICD_LVL */
-#define WM8400_MICD_LVL_SHIFT                       15  /* MICD_LVL */
-#define WM8400_MICD_LVL_WIDTH                        1  /* MICD_LVL */
-#define WM8400_MICSCD_LVL                       0x4000  /* MICSCD_LVL */
-#define WM8400_MICSCD_LVL_MASK                  0x4000  /* MICSCD_LVL */
-#define WM8400_MICSCD_LVL_SHIFT                     14  /* MICSCD_LVL */
-#define WM8400_MICSCD_LVL_WIDTH                      1  /* MICSCD_LVL */
-#define WM8400_JDL_LVL                          0x2000  /* JDL_LVL */
-#define WM8400_JDL_LVL_MASK                     0x2000  /* JDL_LVL */
-#define WM8400_JDL_LVL_SHIFT                        13  /* JDL_LVL */
-#define WM8400_JDL_LVL_WIDTH                         1  /* JDL_LVL */
-#define WM8400_JDR_LVL                          0x1000  /* JDR_LVL */
-#define WM8400_JDR_LVL_MASK                     0x1000  /* JDR_LVL */
-#define WM8400_JDR_LVL_SHIFT                        12  /* JDR_LVL */
-#define WM8400_JDR_LVL_WIDTH                         1  /* JDR_LVL */
-#define WM8400_CODEC_SEQ_END_LVL                0x0800  /* CODEC_SEQ_END_LVL */
-#define WM8400_CODEC_SEQ_END_LVL_MASK           0x0800  /* CODEC_SEQ_END_LVL */
-#define WM8400_CODEC_SEQ_END_LVL_SHIFT              11  /* CODEC_SEQ_END_LVL */
-#define WM8400_CODEC_SEQ_END_LVL_WIDTH               1  /* CODEC_SEQ_END_LVL */
-#define WM8400_CDEL_TO_LVL                      0x0400  /* CDEL_TO_LVL */
-#define WM8400_CDEL_TO_LVL_MASK                 0x0400  /* CDEL_TO_LVL */
-#define WM8400_CDEL_TO_LVL_SHIFT                    10  /* CDEL_TO_LVL */
-#define WM8400_CDEL_TO_LVL_WIDTH                     1  /* CDEL_TO_LVL */
-#define WM8400_CHIP_GT150_LVL                   0x0200  /* CHIP_GT150_LVL */
-#define WM8400_CHIP_GT150_LVL_MASK              0x0200  /* CHIP_GT150_LVL */
-#define WM8400_CHIP_GT150_LVL_SHIFT                  9  /* CHIP_GT150_LVL */
-#define WM8400_CHIP_GT150_LVL_WIDTH                  1  /* CHIP_GT150_LVL */
-#define WM8400_CHIP_GT115_LVL                   0x0100  /* CHIP_GT115_LVL */
-#define WM8400_CHIP_GT115_LVL_MASK              0x0100  /* CHIP_GT115_LVL */
-#define WM8400_CHIP_GT115_LVL_SHIFT                  8  /* CHIP_GT115_LVL */
-#define WM8400_CHIP_GT115_LVL_WIDTH                  1  /* CHIP_GT115_LVL */
-#define WM8400_LINE_CMP_LVL                     0x0080  /* LINE_CMP_LVL */
-#define WM8400_LINE_CMP_LVL_MASK                0x0080  /* LINE_CMP_LVL */
-#define WM8400_LINE_CMP_LVL_SHIFT                    7  /* LINE_CMP_LVL */
-#define WM8400_LINE_CMP_LVL_WIDTH                    1  /* LINE_CMP_LVL */
-#define WM8400_UVLO_LVL                         0x0040  /* UVLO_LVL */
-#define WM8400_UVLO_LVL_MASK                    0x0040  /* UVLO_LVL */
-#define WM8400_UVLO_LVL_SHIFT                        6  /* UVLO_LVL */
-#define WM8400_UVLO_LVL_WIDTH                        1  /* UVLO_LVL */
-#define WM8400_DC2_UV_LVL                       0x0020  /* DC2_UV_LVL */
-#define WM8400_DC2_UV_LVL_MASK                  0x0020  /* DC2_UV_LVL */
-#define WM8400_DC2_UV_LVL_SHIFT                      5  /* DC2_UV_LVL */
-#define WM8400_DC2_UV_LVL_WIDTH                      1  /* DC2_UV_LVL */
-#define WM8400_DC1_UV_LVL                       0x0010  /* DC1_UV_LVL */
-#define WM8400_DC1_UV_LVL_MASK                  0x0010  /* DC1_UV_LVL */
-#define WM8400_DC1_UV_LVL_SHIFT                      4  /* DC1_UV_LVL */
-#define WM8400_DC1_UV_LVL_WIDTH                      1  /* DC1_UV_LVL */
-#define WM8400_LDO4_UV_LVL                      0x0008  /* LDO4_UV_LVL */
-#define WM8400_LDO4_UV_LVL_MASK                 0x0008  /* LDO4_UV_LVL */
-#define WM8400_LDO4_UV_LVL_SHIFT                     3  /* LDO4_UV_LVL */
-#define WM8400_LDO4_UV_LVL_WIDTH                     1  /* LDO4_UV_LVL */
-#define WM8400_LDO3_UV_LVL                      0x0004  /* LDO3_UV_LVL */
-#define WM8400_LDO3_UV_LVL_MASK                 0x0004  /* LDO3_UV_LVL */
-#define WM8400_LDO3_UV_LVL_SHIFT                     2  /* LDO3_UV_LVL */
-#define WM8400_LDO3_UV_LVL_WIDTH                     1  /* LDO3_UV_LVL */
-#define WM8400_LDO2_UV_LVL                      0x0002  /* LDO2_UV_LVL */
-#define WM8400_LDO2_UV_LVL_MASK                 0x0002  /* LDO2_UV_LVL */
-#define WM8400_LDO2_UV_LVL_SHIFT                     1  /* LDO2_UV_LVL */
-#define WM8400_LDO2_UV_LVL_WIDTH                     1  /* LDO2_UV_LVL */
-#define WM8400_LDO1_UV_LVL                      0x0001  /* LDO1_UV_LVL */
-#define WM8400_LDO1_UV_LVL_MASK                 0x0001  /* LDO1_UV_LVL */
-#define WM8400_LDO1_UV_LVL_SHIFT                     0  /* LDO1_UV_LVL */
-#define WM8400_LDO1_UV_LVL_WIDTH                     1  /* LDO1_UV_LVL */
-
-/*
- * R82 (0x52) - Shutdown Reason
- */
-#define WM8400_SDR_CHIP_SOFTSD                  0x2000  /* SDR_CHIP_SOFTSD */
-#define WM8400_SDR_CHIP_SOFTSD_MASK             0x2000  /* SDR_CHIP_SOFTSD */
-#define WM8400_SDR_CHIP_SOFTSD_SHIFT                13  /* SDR_CHIP_SOFTSD */
-#define WM8400_SDR_CHIP_SOFTSD_WIDTH                 1  /* SDR_CHIP_SOFTSD */
-#define WM8400_SDR_NPDN                         0x0800  /* SDR_NPDN */
-#define WM8400_SDR_NPDN_MASK                    0x0800  /* SDR_NPDN */
-#define WM8400_SDR_NPDN_SHIFT                       11  /* SDR_NPDN */
-#define WM8400_SDR_NPDN_WIDTH                        1  /* SDR_NPDN */
-#define WM8400_SDR_CHIP_GT150                   0x0200  /* SDR_CHIP_GT150 */
-#define WM8400_SDR_CHIP_GT150_MASK              0x0200  /* SDR_CHIP_GT150 */
-#define WM8400_SDR_CHIP_GT150_SHIFT                  9  /* SDR_CHIP_GT150 */
-#define WM8400_SDR_CHIP_GT150_WIDTH                  1  /* SDR_CHIP_GT150 */
-#define WM8400_SDR_CHIP_GT115                   0x0100  /* SDR_CHIP_GT115 */
-#define WM8400_SDR_CHIP_GT115_MASK              0x0100  /* SDR_CHIP_GT115 */
-#define WM8400_SDR_CHIP_GT115_SHIFT                  8  /* SDR_CHIP_GT115 */
-#define WM8400_SDR_CHIP_GT115_WIDTH                  1  /* SDR_CHIP_GT115 */
-#define WM8400_SDR_LINE_CMP                     0x0080  /* SDR_LINE_CMP */
-#define WM8400_SDR_LINE_CMP_MASK                0x0080  /* SDR_LINE_CMP */
-#define WM8400_SDR_LINE_CMP_SHIFT                    7  /* SDR_LINE_CMP */
-#define WM8400_SDR_LINE_CMP_WIDTH                    1  /* SDR_LINE_CMP */
-#define WM8400_SDR_UVLO                         0x0040  /* SDR_UVLO */
-#define WM8400_SDR_UVLO_MASK                    0x0040  /* SDR_UVLO */
-#define WM8400_SDR_UVLO_SHIFT                        6  /* SDR_UVLO */
-#define WM8400_SDR_UVLO_WIDTH                        1  /* SDR_UVLO */
-#define WM8400_SDR_DC2_UV                       0x0020  /* SDR_DC2_UV */
-#define WM8400_SDR_DC2_UV_MASK                  0x0020  /* SDR_DC2_UV */
-#define WM8400_SDR_DC2_UV_SHIFT                      5  /* SDR_DC2_UV */
-#define WM8400_SDR_DC2_UV_WIDTH                      1  /* SDR_DC2_UV */
-#define WM8400_SDR_DC1_UV                       0x0010  /* SDR_DC1_UV */
-#define WM8400_SDR_DC1_UV_MASK                  0x0010  /* SDR_DC1_UV */
-#define WM8400_SDR_DC1_UV_SHIFT                      4  /* SDR_DC1_UV */
-#define WM8400_SDR_DC1_UV_WIDTH                      1  /* SDR_DC1_UV */
-#define WM8400_SDR_LDO4_UV                      0x0008  /* SDR_LDO4_UV */
-#define WM8400_SDR_LDO4_UV_MASK                 0x0008  /* SDR_LDO4_UV */
-#define WM8400_SDR_LDO4_UV_SHIFT                     3  /* SDR_LDO4_UV */
-#define WM8400_SDR_LDO4_UV_WIDTH                     1  /* SDR_LDO4_UV */
-#define WM8400_SDR_LDO3_UV                      0x0004  /* SDR_LDO3_UV */
-#define WM8400_SDR_LDO3_UV_MASK                 0x0004  /* SDR_LDO3_UV */
-#define WM8400_SDR_LDO3_UV_SHIFT                     2  /* SDR_LDO3_UV */
-#define WM8400_SDR_LDO3_UV_WIDTH                     1  /* SDR_LDO3_UV */
-#define WM8400_SDR_LDO2_UV                      0x0002  /* SDR_LDO2_UV */
-#define WM8400_SDR_LDO2_UV_MASK                 0x0002  /* SDR_LDO2_UV */
-#define WM8400_SDR_LDO2_UV_SHIFT                     1  /* SDR_LDO2_UV */
-#define WM8400_SDR_LDO2_UV_WIDTH                     1  /* SDR_LDO2_UV */
-#define WM8400_SDR_LDO1_UV                      0x0001  /* SDR_LDO1_UV */
-#define WM8400_SDR_LDO1_UV_MASK                 0x0001  /* SDR_LDO1_UV */
-#define WM8400_SDR_LDO1_UV_SHIFT                     0  /* SDR_LDO1_UV */
-#define WM8400_SDR_LDO1_UV_WIDTH                     1  /* SDR_LDO1_UV */
-
-/*
- * R84 (0x54) - Line Circuits
- */
-#define WM8400_BG_LINE_COMP                     0x8000  /* BG_LINE_COMP */
-#define WM8400_BG_LINE_COMP_MASK                0x8000  /* BG_LINE_COMP */
-#define WM8400_BG_LINE_COMP_SHIFT                   15  /* BG_LINE_COMP */
-#define WM8400_BG_LINE_COMP_WIDTH                    1  /* BG_LINE_COMP */
-#define WM8400_LINE_CMP_VTHI_MASK               0x00F0  /* LINE_CMP_VTHI - [7:4] */
-#define WM8400_LINE_CMP_VTHI_SHIFT                   4  /* LINE_CMP_VTHI - [7:4] */
-#define WM8400_LINE_CMP_VTHI_WIDTH                   4  /* LINE_CMP_VTHI - [7:4] */
-#define WM8400_LINE_CMP_VTHD_MASK               0x000F  /* LINE_CMP_VTHD - [3:0] */
-#define WM8400_LINE_CMP_VTHD_SHIFT                   0  /* LINE_CMP_VTHD - [3:0] */
-#define WM8400_LINE_CMP_VTHD_WIDTH                   4  /* LINE_CMP_VTHD - [3:0] */
-
-u16 wm8400_reg_read(struct wm8400 *wm8400, u8 reg);
-int wm8400_block_read(struct wm8400 *wm8400, u8 reg, int count, u16 *data);
-int wm8400_set_bits(struct wm8400 *wm8400, u8 reg, u16 mask, u16 val);
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/mfd/wm8400.h b/ANDROID_3.4.5/include/linux/mfd/wm8400.h
deleted file mode 100644
index b46b566a..00000000
--- a/ANDROID_3.4.5/include/linux/mfd/wm8400.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- * wm8400 client interface
- *
- * Copyright 2008 Wolfson Microelectronics plc
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __LINUX_MFD_WM8400_H
-#define __LINUX_MFD_WM8400_H
-
-#include <linux/regulator/machine.h>
-
-#define WM8400_LDO1  0
-#define WM8400_LDO2  1
-#define WM8400_LDO3  2
-#define WM8400_LDO4  3
-#define WM8400_DCDC1 4
-#define WM8400_DCDC2 5
-
-struct wm8400_platform_data {
-	int (*platform_init)(struct device *dev);
-};
-
-int wm8400_register_regulator(struct device *dev, int reg,
-			      struct regulator_init_data *initdata);
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/mfd/wm8994/core.h b/ANDROID_3.4.5/include/linux/mfd/wm8994/core.h
deleted file mode 100644
index 9eff2a35..00000000
--- a/ANDROID_3.4.5/include/linux/mfd/wm8994/core.h
+++ /dev/null
@@ -1,113 +0,0 @@
-/*
- * include/linux/mfd/wm8994/core.h -- Core interface for WM8994
- *
- * Copyright 2009 Wolfson Microelectronics PLC.
- *
- * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- */
-
-#ifndef __MFD_WM8994_CORE_H__
-#define __MFD_WM8994_CORE_H__
-
-#include <linux/mutex.h>
-#include <linux/interrupt.h>
-
-enum wm8994_type {
-	WM8994 = 0,
-	WM8958 = 1,
-	WM1811 = 2,
-};
-
-struct regulator_dev;
-struct regulator_bulk_data;
-struct regmap;
-
-#define WM8994_NUM_GPIO_REGS 11
-#define WM8994_NUM_LDO_REGS   2
-#define WM8994_NUM_IRQ_REGS   2
-
-#define WM8994_IRQ_TEMP_SHUT		0
-#define WM8994_IRQ_MIC1_DET		1
-#define WM8994_IRQ_MIC1_SHRT		2
-#define WM8994_IRQ_MIC2_DET		3
-#define WM8994_IRQ_MIC2_SHRT		4
-#define WM8994_IRQ_FLL1_LOCK		5
-#define WM8994_IRQ_FLL2_LOCK		6
-#define WM8994_IRQ_SRC1_LOCK		7
-#define WM8994_IRQ_SRC2_LOCK		8
-#define WM8994_IRQ_AIF1DRC1_SIG_DET	9
-#define WM8994_IRQ_AIF1DRC2_SIG_DET	10
-#define WM8994_IRQ_AIF2DRC_SIG_DET	11
-#define WM8994_IRQ_FIFOS_ERR		12
-#define WM8994_IRQ_WSEQ_DONE		13
-#define WM8994_IRQ_DCS_DONE		14
-#define WM8994_IRQ_TEMP_WARN		15
-
-/* GPIOs in the chip are numbered from 1-11 */
-#define WM8994_IRQ_GPIO(x) (x + WM8994_IRQ_TEMP_WARN)
-
-struct wm8994 {
-	struct mutex irq_lock;
-
-	enum wm8994_type type;
-	int revision;
-
-	struct device *dev;
-	struct regmap *regmap;
-
-	bool ldo_ena_always_driven;
-
-	int gpio_base;
-	int irq_base;
-
-	int irq;
-	struct regmap_irq_chip_data *irq_data;
-
-	/* Used over suspend/resume */
-	bool suspended;
-
-	struct regulator_dev *dbvdd;
-	int num_supplies;
-	struct regulator_bulk_data *supplies;
-};
-
-/* Device I/O API */
-int wm8994_reg_read(struct wm8994 *wm8994, unsigned short reg);
-int wm8994_reg_write(struct wm8994 *wm8994, unsigned short reg,
-		 unsigned short val);
-int wm8994_set_bits(struct wm8994 *wm8994, unsigned short reg,
-		    unsigned short mask, unsigned short val);
-int wm8994_bulk_read(struct wm8994 *wm8994, unsigned short reg,
-		     int count, u16 *buf);
-int wm8994_bulk_write(struct wm8994 *wm8994, unsigned short reg,
-		     int count, const u16 *buf);
-
-
-/* Helper to save on boilerplate */
-static inline int wm8994_request_irq(struct wm8994 *wm8994, int irq,
-				     irq_handler_t handler, const char *name,
-				     void *data)
-{
-	if (!wm8994->irq_base)
-		return -EINVAL;
-	return request_threaded_irq(wm8994->irq_base + irq, NULL, handler,
-				    IRQF_TRIGGER_RISING, name,
-				    data);
-}
-static inline void wm8994_free_irq(struct wm8994 *wm8994, int irq, void *data)
-{
-	if (!wm8994->irq_base)
-		return;
-	free_irq(wm8994->irq_base + irq, data);
-}
-
-int wm8994_irq_init(struct wm8994 *wm8994);
-void wm8994_irq_exit(struct wm8994 *wm8994);
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/mfd/wm8994/gpio.h b/ANDROID_3.4.5/include/linux/mfd/wm8994/gpio.h
deleted file mode 100644
index 0c79b5ff..00000000
--- a/ANDROID_3.4.5/include/linux/mfd/wm8994/gpio.h
+++ /dev/null
@@ -1,76 +0,0 @@
-/*
- * include/linux/mfd/wm8994/gpio.h - GPIO configuration for WM8994
- *
- * Copyright 2009 Wolfson Microelectronics PLC.
- *
- * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- */
-
-#ifndef __MFD_WM8994_GPIO_H__
-#define __MFD_WM8994_GPIO_H__
-
-#define WM8994_GPIO_MAX 11
-
-#define WM8994_GP_FN_PIN_SPECIFIC    0
-#define WM8994_GP_FN_GPIO            1
-#define WM8994_GP_FN_SDOUT           2
-#define WM8994_GP_FN_IRQ             3
-#define WM8994_GP_FN_TEMPERATURE     4
-#define WM8994_GP_FN_MICBIAS1_DET    5
-#define WM8994_GP_FN_MICBIAS1_SHORT  6
-#define WM8994_GP_FN_MICBIAS2_DET    7
-#define WM8994_GP_FN_MICBIAS2_SHORT  8
-#define WM8994_GP_FN_FLL1_LOCK       9
-#define WM8994_GP_FN_FLL2_LOCK      10
-#define WM8994_GP_FN_SRC1_LOCK      11
-#define WM8994_GP_FN_SRC2_LOCK      12
-#define WM8994_GP_FN_DRC1_ACT       13
-#define WM8994_GP_FN_DRC2_ACT       14
-#define WM8994_GP_FN_DRC3_ACT       15
-#define WM8994_GP_FN_WSEQ_STATUS    16
-#define WM8994_GP_FN_FIFO_ERROR     17
-#define WM8994_GP_FN_OPCLK          18
-#define WM8994_GP_FN_THW	    19
-#define WM8994_GP_FN_DCS_DONE	    20
-#define WM8994_GP_FN_FLL1_OUT       21
-#define WM8994_GP_FN_FLL2_OUT       22
-
-#define WM8994_GPN_DIR                          0x8000  /* GPN_DIR */
-#define WM8994_GPN_DIR_MASK                     0x8000  /* GPN_DIR */
-#define WM8994_GPN_DIR_SHIFT                        15  /* GPN_DIR */
-#define WM8994_GPN_DIR_WIDTH                         1  /* GPN_DIR */
-#define WM8994_GPN_PU                           0x4000  /* GPN_PU */
-#define WM8994_GPN_PU_MASK                      0x4000  /* GPN_PU */
-#define WM8994_GPN_PU_SHIFT                         14  /* GPN_PU */
-#define WM8994_GPN_PU_WIDTH                          1  /* GPN_PU */
-#define WM8994_GPN_PD                           0x2000  /* GPN_PD */
-#define WM8994_GPN_PD_MASK                      0x2000  /* GPN_PD */
-#define WM8994_GPN_PD_SHIFT                         13  /* GPN_PD */
-#define WM8994_GPN_PD_WIDTH                          1  /* GPN_PD */
-#define WM8994_GPN_POL                          0x0400  /* GPN_POL */
-#define WM8994_GPN_POL_MASK                     0x0400  /* GPN_POL */
-#define WM8994_GPN_POL_SHIFT                        10  /* GPN_POL */
-#define WM8994_GPN_POL_WIDTH                         1  /* GPN_POL */
-#define WM8994_GPN_OP_CFG                       0x0200  /* GPN_OP_CFG */
-#define WM8994_GPN_OP_CFG_MASK                  0x0200  /* GPN_OP_CFG */
-#define WM8994_GPN_OP_CFG_SHIFT                      9  /* GPN_OP_CFG */
-#define WM8994_GPN_OP_CFG_WIDTH                      1  /* GPN_OP_CFG */
-#define WM8994_GPN_DB                           0x0100  /* GPN_DB */
-#define WM8994_GPN_DB_MASK                      0x0100  /* GPN_DB */
-#define WM8994_GPN_DB_SHIFT                          8  /* GPN_DB */
-#define WM8994_GPN_DB_WIDTH                          1  /* GPN_DB */
-#define WM8994_GPN_LVL                          0x0040  /* GPN_LVL */
-#define WM8994_GPN_LVL_MASK                     0x0040  /* GPN_LVL */
-#define WM8994_GPN_LVL_SHIFT                         6  /* GPN_LVL */
-#define WM8994_GPN_LVL_WIDTH                         1  /* GPN_LVL */
-#define WM8994_GPN_FN_MASK                      0x001F  /* GPN_FN - [4:0] */
-#define WM8994_GPN_FN_SHIFT                          0  /* GPN_FN - [4:0] */
-#define WM8994_GPN_FN_WIDTH                          5  /* GPN_FN - [4:0] */
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/mfd/wm8994/pdata.h b/ANDROID_3.4.5/include/linux/mfd/wm8994/pdata.h
deleted file mode 100644
index 893267bb..00000000
--- a/ANDROID_3.4.5/include/linux/mfd/wm8994/pdata.h
+++ /dev/null
@@ -1,210 +0,0 @@
-/*
- * include/linux/mfd/wm8994/pdata.h -- Platform data for WM8994
- *
- * Copyright 2009 Wolfson Microelectronics PLC.
- *
- * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- */
-
-#ifndef __MFD_WM8994_PDATA_H__
-#define __MFD_WM8994_PDATA_H__
-
-#define WM8994_NUM_LDO   2
-#define WM8994_NUM_GPIO 11
-
-struct wm8994_ldo_pdata {
-	/** GPIOs to enable regulator, 0 or less if not available */
-	int enable;
-
-	const struct regulator_init_data *init_data;
-};
-
-#define WM8994_CONFIGURE_GPIO 0x10000
-
-#define WM8994_DRC_REGS 5
-#define WM8994_EQ_REGS  20
-#define WM8958_MBC_CUTOFF_REGS 20
-#define WM8958_MBC_COEFF_REGS  48
-#define WM8958_MBC_COMBINED_REGS 56
-#define WM8958_VSS_HPF_REGS 2
-#define WM8958_VSS_REGS 148
-#define WM8958_ENH_EQ_REGS 32
-
-/**
- * DRC configurations are specified with a label and a set of register
- * values to write (the enable bits will be ignored).  At runtime an
- * enumerated control will be presented for each DRC block allowing
- * the user to choose the configration to use.
- *
- * Configurations may be generated by hand or by using the DRC control
- * panel provided by the WISCE - see  http://www.wolfsonmicro.com/wisce/
- * for details.
- */
-struct wm8994_drc_cfg {
-        const char *name;
-        u16 regs[WM8994_DRC_REGS];
-};
-
-/**
- * ReTune Mobile configurations are specified with a label, sample
- * rate and set of values to write (the enable bits will be ignored).
- *
- * Configurations are expected to be generated using the ReTune Mobile
- * control panel in WISCE - see http://www.wolfsonmicro.com/wisce/
- */
-struct wm8994_retune_mobile_cfg {
-        const char *name;
-        unsigned int rate;
-        u16 regs[WM8994_EQ_REGS];
-};
-
-/**
- * Multiband compressor configurations are specified with a label and
- * two sets of values to write.  Configurations are expected to be
- * generated using the multiband compressor configuration panel in
- * WISCE - see http://www.wolfsonmicro.com/wisce/
- */
-struct wm8958_mbc_cfg {
-	const char *name;
-	u16 cutoff_regs[WM8958_MBC_CUTOFF_REGS];
-	u16 coeff_regs[WM8958_MBC_COEFF_REGS];
-
-	/* Coefficient layout when using MBC+VSS firmware */
-	u16 combined_regs[WM8958_MBC_COMBINED_REGS];
-};
-
-/**
- * VSS HPF configurations are specified with a label and two values to
- * write.  Configurations are expected to be generated using the
- * multiband compressor configuration panel in WISCE - see
- * http://www.wolfsonmicro.com/wisce/
- */
-struct wm8958_vss_hpf_cfg {
-	const char *name;
-	u16 regs[WM8958_VSS_HPF_REGS];
-};
-
-/**
- * VSS configurations are specified with a label and array of values
- * to write.  Configurations are expected to be generated using the
- * multiband compressor configuration panel in WISCE - see
- * http://www.wolfsonmicro.com/wisce/
- */
-struct wm8958_vss_cfg {
-	const char *name;
-	u16 regs[WM8958_VSS_REGS];
-};
-
-/**
- * Enhanced EQ configurations are specified with a label and array of
- * values to write.  Configurations are expected to be generated using
- * the multiband compressor configuration panel in WISCE - see
- * http://www.wolfsonmicro.com/wisce/
- */
-struct wm8958_enh_eq_cfg {
-	const char *name;
-	u16 regs[WM8958_ENH_EQ_REGS];
-};
-
-/**
- * Microphone detection rates, used to tune response rates and power
- * consumption for WM8958/WM1811 microphone detection.
- *
- * @sysclk: System clock rate to use this configuration for.
- * @idle: True if this configuration should use when no accessory is detected,
- *        false otherwise.
- * @start: Value for MICD_BIAS_START_TIME register field (not shifted).
- * @rate: Value for MICD_RATE register field (not shifted).
- */
-struct wm8958_micd_rate {
-	int sysclk;
-	bool idle;
-	int start;
-	int rate;
-};
-
-struct wm8994_pdata {
-	int gpio_base;
-
-	/**
-	 * Default values for GPIOs if non-zero, WM8994_CONFIGURE_GPIO
-	 * can be used for all zero values.
-	 */
-	int gpio_defaults[WM8994_NUM_GPIO];
-
-	struct wm8994_ldo_pdata ldo[WM8994_NUM_LDO];
-
-	int irq_base;  /** Base IRQ number for WM8994, required for IRQs */
-
-        int num_drc_cfgs;
-        struct wm8994_drc_cfg *drc_cfgs;
-
-        int num_retune_mobile_cfgs;
-        struct wm8994_retune_mobile_cfg *retune_mobile_cfgs;
-
-	int num_mbc_cfgs;
-	struct wm8958_mbc_cfg *mbc_cfgs;
-
-	int num_vss_cfgs;
-	struct wm8958_vss_cfg *vss_cfgs;
-
-	int num_vss_hpf_cfgs;
-	struct wm8958_vss_hpf_cfg *vss_hpf_cfgs;
-
-	int num_enh_eq_cfgs;
-	struct wm8958_enh_eq_cfg *enh_eq_cfgs;
-
-	int num_micd_rates;
-	struct wm8958_micd_rate *micd_rates;
-
-        /* LINEOUT can be differential or single ended */
-        unsigned int lineout1_diff:1;
-        unsigned int lineout2_diff:1;
-
-        /* Common mode feedback */
-        unsigned int lineout1fb:1;
-        unsigned int lineout2fb:1;
-
-	/* IRQ for microphone detection if brought out directly as a
-	 * signal.
-	 */
-	int micdet_irq;
-
-        /* WM8994 microphone biases: 0=0.9*AVDD1 1=0.65*AVVD1 */
-        unsigned int micbias1_lvl:1;
-        unsigned int micbias2_lvl:1;
-
-        /* WM8994 jack detect threashold levels, see datasheet for values */
-        unsigned int jd_scthr:2;
-        unsigned int jd_thr:2;
-
-	/* Configure WM1811 jack detection for use with external capacitor */
-	unsigned int jd_ext_cap:1;
-
-	/* WM8958 microphone bias configuration */
-	int micbias[2];
-
-	/* WM8958 microphone detection ranges */
-	u16 micd_lvl_sel;
-
-	/* Disable the internal pull downs on the LDOs if they are
-	 * always driven (eg, connected to an always on supply or
-	 * GPIO that always drives an output.  If they float power
-	 * consumption will rise.
-	 */
-	bool ldo_ena_always_driven;
-
-	/*
-	 * SPKMODE must be pulled internally by the device on this
-	 * system.
-	 */
-	bool spkmode_pu;
-};
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/mfd/wm8994/registers.h b/ANDROID_3.4.5/include/linux/mfd/wm8994/registers.h
deleted file mode 100644
index 86e6a032..00000000
--- a/ANDROID_3.4.5/include/linux/mfd/wm8994/registers.h
+++ /dev/null
@@ -1,4811 +0,0 @@
-/*
- * include/linux/mfd/wm8994/registers.h -- Register definitions for WM8994
- *
- * Copyright 2009 Wolfson Microelectronics PLC.
- *
- * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- */
-
-#ifndef __MFD_WM8994_REGISTERS_H__
-#define __MFD_WM8994_REGISTERS_H__
-
-/*
- * Register values.
- */
-#define WM8994_SOFTWARE_RESET                   0x00
-#define WM8994_POWER_MANAGEMENT_1               0x01
-#define WM8994_POWER_MANAGEMENT_2               0x02
-#define WM8994_POWER_MANAGEMENT_3               0x03
-#define WM8994_POWER_MANAGEMENT_4               0x04
-#define WM8994_POWER_MANAGEMENT_5               0x05
-#define WM8994_POWER_MANAGEMENT_6               0x06
-#define WM8994_INPUT_MIXER_1                    0x15
-#define WM8994_LEFT_LINE_INPUT_1_2_VOLUME       0x18
-#define WM8994_LEFT_LINE_INPUT_3_4_VOLUME       0x19
-#define WM8994_RIGHT_LINE_INPUT_1_2_VOLUME      0x1A
-#define WM8994_RIGHT_LINE_INPUT_3_4_VOLUME      0x1B
-#define WM8994_LEFT_OUTPUT_VOLUME               0x1C
-#define WM8994_RIGHT_OUTPUT_VOLUME              0x1D
-#define WM8994_LINE_OUTPUTS_VOLUME              0x1E
-#define WM8994_HPOUT2_VOLUME                    0x1F
-#define WM8994_LEFT_OPGA_VOLUME                 0x20
-#define WM8994_RIGHT_OPGA_VOLUME                0x21
-#define WM8994_SPKMIXL_ATTENUATION              0x22
-#define WM8994_SPKMIXR_ATTENUATION              0x23
-#define WM8994_SPKOUT_MIXERS                    0x24
-#define WM8994_CLASSD                           0x25
-#define WM8994_SPEAKER_VOLUME_LEFT              0x26
-#define WM8994_SPEAKER_VOLUME_RIGHT             0x27
-#define WM8994_INPUT_MIXER_2                    0x28
-#define WM8994_INPUT_MIXER_3                    0x29
-#define WM8994_INPUT_MIXER_4                    0x2A
-#define WM8994_INPUT_MIXER_5                    0x2B
-#define WM8994_INPUT_MIXER_6                    0x2C
-#define WM8994_OUTPUT_MIXER_1                   0x2D
-#define WM8994_OUTPUT_MIXER_2                   0x2E
-#define WM8994_OUTPUT_MIXER_3                   0x2F
-#define WM8994_OUTPUT_MIXER_4                   0x30
-#define WM8994_OUTPUT_MIXER_5                   0x31
-#define WM8994_OUTPUT_MIXER_6                   0x32
-#define WM8994_HPOUT2_MIXER                     0x33
-#define WM8994_LINE_MIXER_1                     0x34
-#define WM8994_LINE_MIXER_2                     0x35
-#define WM8994_SPEAKER_MIXER                    0x36
-#define WM8994_ADDITIONAL_CONTROL               0x37
-#define WM8994_ANTIPOP_1                        0x38
-#define WM8994_ANTIPOP_2                        0x39
-#define WM8994_MICBIAS                          0x3A
-#define WM8994_LDO_1                            0x3B
-#define WM8994_LDO_2                            0x3C
-#define WM8958_MICBIAS1				0x3D
-#define WM8958_MICBIAS2				0x3E
-#define WM8994_CHARGE_PUMP_1                    0x4C
-#define WM8958_CHARGE_PUMP_2                    0x4D
-#define WM8994_CLASS_W_1                        0x51
-#define WM8994_DC_SERVO_1                       0x54
-#define WM8994_DC_SERVO_2                       0x55
-#define WM8994_DC_SERVO_4                       0x57
-#define WM8994_DC_SERVO_READBACK                0x58
-#define WM8994_DC_SERVO_4E			0x59
-#define WM8994_ANALOGUE_HP_1                    0x60
-#define WM8958_MIC_DETECT_1                     0xD0
-#define WM8958_MIC_DETECT_2                     0xD1
-#define WM8958_MIC_DETECT_3                     0xD2
-#define WM8994_CHIP_REVISION                    0x100
-#define WM8994_CONTROL_INTERFACE                0x101
-#define WM8994_WRITE_SEQUENCER_CTRL_1           0x110
-#define WM8994_WRITE_SEQUENCER_CTRL_2           0x111
-#define WM8994_AIF1_CLOCKING_1                  0x200
-#define WM8994_AIF1_CLOCKING_2                  0x201
-#define WM8994_AIF2_CLOCKING_1                  0x204
-#define WM8994_AIF2_CLOCKING_2                  0x205
-#define WM8994_CLOCKING_1                       0x208
-#define WM8994_CLOCKING_2                       0x209
-#define WM8994_AIF1_RATE                        0x210
-#define WM8994_AIF2_RATE                        0x211
-#define WM8994_RATE_STATUS                      0x212
-#define WM8994_FLL1_CONTROL_1                   0x220
-#define WM8994_FLL1_CONTROL_2                   0x221
-#define WM8994_FLL1_CONTROL_3                   0x222
-#define WM8994_FLL1_CONTROL_4                   0x223
-#define WM8994_FLL1_CONTROL_5                   0x224
-#define WM8958_FLL1_EFS_1                       0x226
-#define WM8958_FLL1_EFS_2                       0x227
-#define WM8994_FLL2_CONTROL_1                   0x240
-#define WM8994_FLL2_CONTROL_2                   0x241
-#define WM8994_FLL2_CONTROL_3                   0x242
-#define WM8994_FLL2_CONTROL_4                   0x243
-#define WM8994_FLL2_CONTROL_5                   0x244
-#define WM8958_FLL2_EFS_1                       0x246
-#define WM8958_FLL2_EFS_2                       0x247
-#define WM8994_AIF1_CONTROL_1                   0x300
-#define WM8994_AIF1_CONTROL_2                   0x301
-#define WM8994_AIF1_MASTER_SLAVE                0x302
-#define WM8994_AIF1_BCLK                        0x303
-#define WM8994_AIF1ADC_LRCLK                    0x304
-#define WM8994_AIF1DAC_LRCLK                    0x305
-#define WM8994_AIF1DAC_DATA                     0x306
-#define WM8994_AIF1ADC_DATA                     0x307
-#define WM8994_AIF2_CONTROL_1                   0x310
-#define WM8994_AIF2_CONTROL_2                   0x311
-#define WM8994_AIF2_MASTER_SLAVE                0x312
-#define WM8994_AIF2_BCLK                        0x313
-#define WM8994_AIF2ADC_LRCLK                    0x314
-#define WM8994_AIF2DAC_LRCLK                    0x315
-#define WM8994_AIF2DAC_DATA                     0x316
-#define WM8994_AIF2ADC_DATA                     0x317
-#define WM1811_AIF2TX_CONTROL                   0x318
-#define WM8958_AIF3_CONTROL_1                   0x320
-#define WM8958_AIF3_CONTROL_2                   0x321
-#define WM8958_AIF3DAC_DATA                     0x322
-#define WM8958_AIF3ADC_DATA                     0x323
-#define WM8994_AIF1_ADC1_LEFT_VOLUME            0x400
-#define WM8994_AIF1_ADC1_RIGHT_VOLUME           0x401
-#define WM8994_AIF1_DAC1_LEFT_VOLUME            0x402
-#define WM8994_AIF1_DAC1_RIGHT_VOLUME           0x403
-#define WM8994_AIF1_ADC2_LEFT_VOLUME            0x404
-#define WM8994_AIF1_ADC2_RIGHT_VOLUME           0x405
-#define WM8994_AIF1_DAC2_LEFT_VOLUME            0x406
-#define WM8994_AIF1_DAC2_RIGHT_VOLUME           0x407
-#define WM8994_AIF1_ADC1_FILTERS                0x410
-#define WM8994_AIF1_ADC2_FILTERS                0x411
-#define WM8994_AIF1_DAC1_FILTERS_1              0x420
-#define WM8994_AIF1_DAC1_FILTERS_2              0x421
-#define WM8994_AIF1_DAC2_FILTERS_1              0x422
-#define WM8994_AIF1_DAC2_FILTERS_2              0x423
-#define WM8958_AIF1_DAC1_NOISE_GATE             0x430
-#define WM8958_AIF1_DAC2_NOISE_GATE             0x431
-#define WM8994_AIF1_DRC1_1                      0x440
-#define WM8994_AIF1_DRC1_2                      0x441
-#define WM8994_AIF1_DRC1_3                      0x442
-#define WM8994_AIF1_DRC1_4                      0x443
-#define WM8994_AIF1_DRC1_5                      0x444
-#define WM8994_AIF1_DRC2_1                      0x450
-#define WM8994_AIF1_DRC2_2                      0x451
-#define WM8994_AIF1_DRC2_3                      0x452
-#define WM8994_AIF1_DRC2_4                      0x453
-#define WM8994_AIF1_DRC2_5                      0x454
-#define WM8994_AIF1_DAC1_EQ_GAINS_1             0x480
-#define WM8994_AIF1_DAC1_EQ_GAINS_2             0x481
-#define WM8994_AIF1_DAC1_EQ_BAND_1_A            0x482
-#define WM8994_AIF1_DAC1_EQ_BAND_1_B            0x483
-#define WM8994_AIF1_DAC1_EQ_BAND_1_PG           0x484
-#define WM8994_AIF1_DAC1_EQ_BAND_2_A            0x485
-#define WM8994_AIF1_DAC1_EQ_BAND_2_B            0x486
-#define WM8994_AIF1_DAC1_EQ_BAND_2_C            0x487
-#define WM8994_AIF1_DAC1_EQ_BAND_2_PG           0x488
-#define WM8994_AIF1_DAC1_EQ_BAND_3_A            0x489
-#define WM8994_AIF1_DAC1_EQ_BAND_3_B            0x48A
-#define WM8994_AIF1_DAC1_EQ_BAND_3_C            0x48B
-#define WM8994_AIF1_DAC1_EQ_BAND_3_PG           0x48C
-#define WM8994_AIF1_DAC1_EQ_BAND_4_A            0x48D
-#define WM8994_AIF1_DAC1_EQ_BAND_4_B            0x48E
-#define WM8994_AIF1_DAC1_EQ_BAND_4_C            0x48F
-#define WM8994_AIF1_DAC1_EQ_BAND_4_PG           0x490
-#define WM8994_AIF1_DAC1_EQ_BAND_5_A            0x491
-#define WM8994_AIF1_DAC1_EQ_BAND_5_B            0x492
-#define WM8994_AIF1_DAC1_EQ_BAND_5_PG           0x493
-#define WM8994_AIF1_DAC1_EQ_BAND_1_C            0x494
-#define WM8994_AIF1_DAC2_EQ_GAINS_1             0x4A0
-#define WM8994_AIF1_DAC2_EQ_GAINS_2             0x4A1
-#define WM8994_AIF1_DAC2_EQ_BAND_1_A            0x4A2
-#define WM8994_AIF1_DAC2_EQ_BAND_1_B            0x4A3
-#define WM8994_AIF1_DAC2_EQ_BAND_1_PG           0x4A4
-#define WM8994_AIF1_DAC2_EQ_BAND_2_A            0x4A5
-#define WM8994_AIF1_DAC2_EQ_BAND_2_B            0x4A6
-#define WM8994_AIF1_DAC2_EQ_BAND_2_C            0x4A7
-#define WM8994_AIF1_DAC2_EQ_BAND_2_PG           0x4A8
-#define WM8994_AIF1_DAC2_EQ_BAND_3_A            0x4A9
-#define WM8994_AIF1_DAC2_EQ_BAND_3_B            0x4AA
-#define WM8994_AIF1_DAC2_EQ_BAND_3_C            0x4AB
-#define WM8994_AIF1_DAC2_EQ_BAND_3_PG           0x4AC
-#define WM8994_AIF1_DAC2_EQ_BAND_4_A            0x4AD
-#define WM8994_AIF1_DAC2_EQ_BAND_4_B            0x4AE
-#define WM8994_AIF1_DAC2_EQ_BAND_4_C            0x4AF
-#define WM8994_AIF1_DAC2_EQ_BAND_4_PG           0x4B0
-#define WM8994_AIF1_DAC2_EQ_BAND_5_A            0x4B1
-#define WM8994_AIF1_DAC2_EQ_BAND_5_B            0x4B2
-#define WM8994_AIF1_DAC2_EQ_BAND_5_PG           0x4B3
-#define WM8994_AIF1_DAC2_EQ_BAND_1_C            0x4B4
-#define WM8994_AIF2_ADC_LEFT_VOLUME             0x500
-#define WM8994_AIF2_ADC_RIGHT_VOLUME            0x501
-#define WM8994_AIF2_DAC_LEFT_VOLUME             0x502
-#define WM8994_AIF2_DAC_RIGHT_VOLUME            0x503
-#define WM8994_AIF2_ADC_FILTERS                 0x510
-#define WM8994_AIF2_DAC_FILTERS_1               0x520
-#define WM8994_AIF2_DAC_FILTERS_2               0x521
-#define WM8958_AIF2_DAC_NOISE_GATE              0x530
-#define WM8994_AIF2_DRC_1                       0x540
-#define WM8994_AIF2_DRC_2                       0x541
-#define WM8994_AIF2_DRC_3                       0x542
-#define WM8994_AIF2_DRC_4                       0x543
-#define WM8994_AIF2_DRC_5                       0x544
-#define WM8994_AIF2_EQ_GAINS_1                  0x580
-#define WM8994_AIF2_EQ_GAINS_2                  0x581
-#define WM8994_AIF2_EQ_BAND_1_A                 0x582
-#define WM8994_AIF2_EQ_BAND_1_B                 0x583
-#define WM8994_AIF2_EQ_BAND_1_PG                0x584
-#define WM8994_AIF2_EQ_BAND_2_A                 0x585
-#define WM8994_AIF2_EQ_BAND_2_B                 0x586
-#define WM8994_AIF2_EQ_BAND_2_C                 0x587
-#define WM8994_AIF2_EQ_BAND_2_PG                0x588
-#define WM8994_AIF2_EQ_BAND_3_A                 0x589
-#define WM8994_AIF2_EQ_BAND_3_B                 0x58A
-#define WM8994_AIF2_EQ_BAND_3_C                 0x58B
-#define WM8994_AIF2_EQ_BAND_3_PG                0x58C
-#define WM8994_AIF2_EQ_BAND_4_A                 0x58D
-#define WM8994_AIF2_EQ_BAND_4_B                 0x58E
-#define WM8994_AIF2_EQ_BAND_4_C                 0x58F
-#define WM8994_AIF2_EQ_BAND_4_PG                0x590
-#define WM8994_AIF2_EQ_BAND_5_A                 0x591
-#define WM8994_AIF2_EQ_BAND_5_B                 0x592
-#define WM8994_AIF2_EQ_BAND_5_PG                0x593
-#define WM8994_AIF2_EQ_BAND_1_C                 0x594
-#define WM8994_DAC1_MIXER_VOLUMES               0x600
-#define WM8994_DAC1_LEFT_MIXER_ROUTING          0x601
-#define WM8994_DAC1_RIGHT_MIXER_ROUTING         0x602
-#define WM8994_DAC2_MIXER_VOLUMES               0x603
-#define WM8994_DAC2_LEFT_MIXER_ROUTING          0x604
-#define WM8994_DAC2_RIGHT_MIXER_ROUTING         0x605
-#define WM8994_AIF1_ADC1_LEFT_MIXER_ROUTING     0x606
-#define WM8994_AIF1_ADC1_RIGHT_MIXER_ROUTING    0x607
-#define WM8994_AIF1_ADC2_LEFT_MIXER_ROUTING     0x608
-#define WM8994_AIF1_ADC2_RIGHT_MIXER_ROUTING    0x609
-#define WM8994_DAC1_LEFT_VOLUME                 0x610
-#define WM8994_DAC1_RIGHT_VOLUME                0x611
-#define WM8994_DAC2_LEFT_VOLUME                 0x612
-#define WM8994_DAC2_RIGHT_VOLUME                0x613
-#define WM8994_DAC_SOFTMUTE                     0x614
-#define WM8994_OVERSAMPLING                     0x620
-#define WM8994_SIDETONE                         0x621
-#define WM8994_GPIO_1                           0x700
-#define WM8994_GPIO_2                           0x701
-#define WM8994_GPIO_3                           0x702
-#define WM8994_GPIO_4                           0x703
-#define WM8994_GPIO_5                           0x704
-#define WM8994_GPIO_6                           0x705
-#define WM1811_JACKDET_CTRL			0x705
-#define WM8994_GPIO_7                           0x706
-#define WM8994_GPIO_8                           0x707
-#define WM8994_GPIO_9                           0x708
-#define WM8994_GPIO_10                          0x709
-#define WM8994_GPIO_11                          0x70A
-#define WM8994_PULL_CONTROL_1                   0x720
-#define WM8994_PULL_CONTROL_2                   0x721
-#define WM8994_INTERRUPT_STATUS_1               0x730
-#define WM8994_INTERRUPT_STATUS_2               0x731
-#define WM8994_INTERRUPT_RAW_STATUS_2           0x732
-#define WM8994_INTERRUPT_STATUS_1_MASK          0x738
-#define WM8994_INTERRUPT_STATUS_2_MASK          0x739
-#define WM8994_INTERRUPT_CONTROL                0x740
-#define WM8994_IRQ_DEBOUNCE                     0x748
-#define WM8958_DSP2_PROGRAM                     0x900
-#define WM8958_DSP2_CONFIG                      0x901
-#define WM8958_DSP2_MAGICNUM                    0xA00
-#define WM8958_DSP2_RELEASEYEAR                 0xA01
-#define WM8958_DSP2_RELEASEMONTHDAY             0xA02
-#define WM8958_DSP2_RELEASETIME                 0xA03
-#define WM8958_DSP2_VERMAJMIN                   0xA04
-#define WM8958_DSP2_VERBUILD                    0xA05
-#define WM8958_DSP2_TESTREG                     0xA06
-#define WM8958_DSP2_XORREG                      0xA07
-#define WM8958_DSP2_SHIFTMAXX                   0xA08
-#define WM8958_DSP2_SHIFTMAXY                   0xA09
-#define WM8958_DSP2_SHIFTMAXZ                   0xA0A
-#define WM8958_DSP2_SHIFTMAXEXTLO               0xA0B
-#define WM8958_DSP2_AESSELECT                   0xA0C
-#define WM8958_DSP2_EXECCONTROL                 0xA0D
-#define WM8958_DSP2_SAMPLEBREAK                 0xA0E
-#define WM8958_DSP2_COUNTBREAK                  0xA0F
-#define WM8958_DSP2_INTSTATUS                   0xA10
-#define WM8958_DSP2_EVENTSTATUS                 0xA11
-#define WM8958_DSP2_INTMASK                     0xA12
-#define WM8958_DSP2_CONFIGDWIDTH                0xA13
-#define WM8958_DSP2_CONFIGINSTR                 0xA14
-#define WM8958_DSP2_CONFIGDMEM                  0xA15
-#define WM8958_DSP2_CONFIGDELAYS                0xA16
-#define WM8958_DSP2_CONFIGNUMIO                 0xA17
-#define WM8958_DSP2_CONFIGEXTDEPTH              0xA18
-#define WM8958_DSP2_CONFIGMULTIPLIER            0xA19
-#define WM8958_DSP2_CONFIGCTRLDWIDTH            0xA1A
-#define WM8958_DSP2_CONFIGPIPELINE              0xA1B
-#define WM8958_DSP2_SHIFTMAXEXTHI               0xA1C
-#define WM8958_DSP2_SWVERSIONREG                0xA1D
-#define WM8958_DSP2_CONFIGXMEM                  0xA1E
-#define WM8958_DSP2_CONFIGYMEM                  0xA1F
-#define WM8958_DSP2_CONFIGZMEM                  0xA20
-#define WM8958_FW_BUILD_1                       0x2000
-#define WM8958_FW_BUILD_0                       0x2001
-#define WM8958_FW_ID_1                          0x2002
-#define WM8958_FW_ID_0                          0x2003
-#define WM8958_FW_MAJOR_1                       0x2004
-#define WM8958_FW_MAJOR_0                       0x2005
-#define WM8958_FW_MINOR_1                       0x2006
-#define WM8958_FW_MINOR_0                       0x2007
-#define WM8958_FW_PATCH_1                       0x2008
-#define WM8958_FW_PATCH_0                       0x2009
-#define WM8958_MBC_BAND_2_LOWER_CUTOFF_C1_1     0x2200
-#define WM8958_MBC_BAND_2_LOWER_CUTOFF_C1_2     0x2201
-#define WM8958_MBC_BAND_2_LOWER_CUTOFF_C2_1     0x2202
-#define WM8958_MBC_BAND_2_LOWER_CUTOFF_C2_2     0x2203
-#define WM8958_MBC_BAND_2_LOWER_CUTOFF_C3_1     0x2204
-#define WM8958_MBC_BAND_2_LOWER_CUTOFF_C3_2     0x2205
-#define WM8958_MBC_BAND_2_UPPER_CUTOFF_C2_1     0x2206
-#define WM8958_MBC_BAND_2_UPPER_CUTOFF_C2_2     0x2207
-#define WM8958_MBC_BAND_2_UPPER_CUTOFF_C3_1     0x2208
-#define WM8958_MBC_BAND_2_UPPER_CUTOFF_C3_2     0x2209
-#define WM8958_MBC_BAND_2_UPPER_CUTOFF_C1_1     0x220A
-#define WM8958_MBC_BAND_2_UPPER_CUTOFF_C1_2     0x220B
-#define WM8958_MBC_BAND_1_UPPER_CUTOFF_C1_1     0x220C
-#define WM8958_MBC_BAND_1_UPPER_CUTOFF_C1_2     0x220D
-#define WM8958_MBC_BAND_1_UPPER_CUTOFF_C2_1     0x220E
-#define WM8958_MBC_BAND_1_UPPER_CUTOFF_C2_2     0x220F
-#define WM8958_MBC_BAND_1_UPPER_CUTOFF_C3_1     0x2210
-#define WM8958_MBC_BAND_1_UPPER_CUTOFF_C3_2     0x2211
-#define WM8958_MBC_BAND_1_LOWER_CUTOFF_1        0x2212
-#define WM8958_MBC_BAND_1_LOWER_CUTOFF_2        0x2213
-#define WM8958_MBC_BAND_1_K_1                   0x2400
-#define WM8958_MBC_BAND_1_K_2                   0x2401
-#define WM8958_MBC_BAND_1_N1_1                  0x2402
-#define WM8958_MBC_BAND_1_N1_2                  0x2403
-#define WM8958_MBC_BAND_1_N2_1                  0x2404
-#define WM8958_MBC_BAND_1_N2_2                  0x2405
-#define WM8958_MBC_BAND_1_N3_1                  0x2406
-#define WM8958_MBC_BAND_1_N3_2                  0x2407
-#define WM8958_MBC_BAND_1_N4_1                  0x2408
-#define WM8958_MBC_BAND_1_N4_2                  0x2409
-#define WM8958_MBC_BAND_1_N5_1                  0x240A
-#define WM8958_MBC_BAND_1_N5_2                  0x240B
-#define WM8958_MBC_BAND_1_X1_1                  0x240C
-#define WM8958_MBC_BAND_1_X1_2                  0x240D
-#define WM8958_MBC_BAND_1_X2_1                  0x240E
-#define WM8958_MBC_BAND_1_X2_2                  0x240F
-#define WM8958_MBC_BAND_1_X3_1                  0x2410
-#define WM8958_MBC_BAND_1_X3_2                  0x2411
-#define WM8958_MBC_BAND_1_ATTACK_1              0x2412
-#define WM8958_MBC_BAND_1_ATTACK_2              0x2413
-#define WM8958_MBC_BAND_1_DECAY_1               0x2414
-#define WM8958_MBC_BAND_1_DECAY_2               0x2415
-#define WM8958_MBC_BAND_2_K_1                   0x2416
-#define WM8958_MBC_BAND_2_K_2                   0x2417
-#define WM8958_MBC_BAND_2_N1_1                  0x2418
-#define WM8958_MBC_BAND_2_N1_2                  0x2419
-#define WM8958_MBC_BAND_2_N2_1                  0x241A
-#define WM8958_MBC_BAND_2_N2_2                  0x241B
-#define WM8958_MBC_BAND_2_N3_1                  0x241C
-#define WM8958_MBC_BAND_2_N3_2                  0x241D
-#define WM8958_MBC_BAND_2_N4_1                  0x241E
-#define WM8958_MBC_BAND_2_N4_2                  0x241F
-#define WM8958_MBC_BAND_2_N5_1                  0x2420
-#define WM8958_MBC_BAND_2_N5_2                  0x2421
-#define WM8958_MBC_BAND_2_X1_1                  0x2422
-#define WM8958_MBC_BAND_2_X1_2                  0x2423
-#define WM8958_MBC_BAND_2_X2_1                  0x2424
-#define WM8958_MBC_BAND_2_X2_2                  0x2425
-#define WM8958_MBC_BAND_2_X3_1                  0x2426
-#define WM8958_MBC_BAND_2_X3_2                  0x2427
-#define WM8958_MBC_BAND_2_ATTACK_1              0x2428
-#define WM8958_MBC_BAND_2_ATTACK_2              0x2429
-#define WM8958_MBC_BAND_2_DECAY_1               0x242A
-#define WM8958_MBC_BAND_2_DECAY_2               0x242B
-#define WM8958_MBC_B2_PG2_1                     0x242C
-#define WM8958_MBC_B2_PG2_2                     0x242D
-#define WM8958_MBC_B1_PG2_1                     0x242E
-#define WM8958_MBC_B1_PG2_2                     0x242F
-#define WM8958_MBC_CROSSOVER_1                  0x2600
-#define WM8958_MBC_CROSSOVER_2                  0x2601
-#define WM8958_MBC_HPF_1                        0x2602
-#define WM8958_MBC_HPF_2                        0x2603
-#define WM8958_MBC_LPF_1                        0x2606
-#define WM8958_MBC_LPF_2                        0x2607
-#define WM8958_MBC_RMS_LIMIT_1                  0x260A
-#define WM8958_MBC_RMS_LIMIT_2                  0x260B
-#define WM8994_WRITE_SEQUENCER_0                0x3000
-#define WM8994_WRITE_SEQUENCER_1                0x3001
-#define WM8994_WRITE_SEQUENCER_2                0x3002
-#define WM8994_WRITE_SEQUENCER_3                0x3003
-#define WM8994_WRITE_SEQUENCER_4                0x3004
-#define WM8994_WRITE_SEQUENCER_5                0x3005
-#define WM8994_WRITE_SEQUENCER_6                0x3006
-#define WM8994_WRITE_SEQUENCER_7                0x3007
-#define WM8994_WRITE_SEQUENCER_8                0x3008
-#define WM8994_WRITE_SEQUENCER_9                0x3009
-#define WM8994_WRITE_SEQUENCER_10               0x300A
-#define WM8994_WRITE_SEQUENCER_11               0x300B
-#define WM8994_WRITE_SEQUENCER_12               0x300C
-#define WM8994_WRITE_SEQUENCER_13               0x300D
-#define WM8994_WRITE_SEQUENCER_14               0x300E
-#define WM8994_WRITE_SEQUENCER_15               0x300F
-#define WM8994_WRITE_SEQUENCER_16               0x3010
-#define WM8994_WRITE_SEQUENCER_17               0x3011
-#define WM8994_WRITE_SEQUENCER_18               0x3012
-#define WM8994_WRITE_SEQUENCER_19               0x3013
-#define WM8994_WRITE_SEQUENCER_20               0x3014
-#define WM8994_WRITE_SEQUENCER_21               0x3015
-#define WM8994_WRITE_SEQUENCER_22               0x3016
-#define WM8994_WRITE_SEQUENCER_23               0x3017
-#define WM8994_WRITE_SEQUENCER_24               0x3018
-#define WM8994_WRITE_SEQUENCER_25               0x3019
-#define WM8994_WRITE_SEQUENCER_26               0x301A
-#define WM8994_WRITE_SEQUENCER_27               0x301B
-#define WM8994_WRITE_SEQUENCER_28               0x301C
-#define WM8994_WRITE_SEQUENCER_29               0x301D
-#define WM8994_WRITE_SEQUENCER_30               0x301E
-#define WM8994_WRITE_SEQUENCER_31               0x301F
-#define WM8994_WRITE_SEQUENCER_32               0x3020
-#define WM8994_WRITE_SEQUENCER_33               0x3021
-#define WM8994_WRITE_SEQUENCER_34               0x3022
-#define WM8994_WRITE_SEQUENCER_35               0x3023
-#define WM8994_WRITE_SEQUENCER_36               0x3024
-#define WM8994_WRITE_SEQUENCER_37               0x3025
-#define WM8994_WRITE_SEQUENCER_38               0x3026
-#define WM8994_WRITE_SEQUENCER_39               0x3027
-#define WM8994_WRITE_SEQUENCER_40               0x3028
-#define WM8994_WRITE_SEQUENCER_41               0x3029
-#define WM8994_WRITE_SEQUENCER_42               0x302A
-#define WM8994_WRITE_SEQUENCER_43               0x302B
-#define WM8994_WRITE_SEQUENCER_44               0x302C
-#define WM8994_WRITE_SEQUENCER_45               0x302D
-#define WM8994_WRITE_SEQUENCER_46               0x302E
-#define WM8994_WRITE_SEQUENCER_47               0x302F
-#define WM8994_WRITE_SEQUENCER_48               0x3030
-#define WM8994_WRITE_SEQUENCER_49               0x3031
-#define WM8994_WRITE_SEQUENCER_50               0x3032
-#define WM8994_WRITE_SEQUENCER_51               0x3033
-#define WM8994_WRITE_SEQUENCER_52               0x3034
-#define WM8994_WRITE_SEQUENCER_53               0x3035
-#define WM8994_WRITE_SEQUENCER_54               0x3036
-#define WM8994_WRITE_SEQUENCER_55               0x3037
-#define WM8994_WRITE_SEQUENCER_56               0x3038
-#define WM8994_WRITE_SEQUENCER_57               0x3039
-#define WM8994_WRITE_SEQUENCER_58               0x303A
-#define WM8994_WRITE_SEQUENCER_59               0x303B
-#define WM8994_WRITE_SEQUENCER_60               0x303C
-#define WM8994_WRITE_SEQUENCER_61               0x303D
-#define WM8994_WRITE_SEQUENCER_62               0x303E
-#define WM8994_WRITE_SEQUENCER_63               0x303F
-#define WM8994_WRITE_SEQUENCER_64               0x3040
-#define WM8994_WRITE_SEQUENCER_65               0x3041
-#define WM8994_WRITE_SEQUENCER_66               0x3042
-#define WM8994_WRITE_SEQUENCER_67               0x3043
-#define WM8994_WRITE_SEQUENCER_68               0x3044
-#define WM8994_WRITE_SEQUENCER_69               0x3045
-#define WM8994_WRITE_SEQUENCER_70               0x3046
-#define WM8994_WRITE_SEQUENCER_71               0x3047
-#define WM8994_WRITE_SEQUENCER_72               0x3048
-#define WM8994_WRITE_SEQUENCER_73               0x3049
-#define WM8994_WRITE_SEQUENCER_74               0x304A
-#define WM8994_WRITE_SEQUENCER_75               0x304B
-#define WM8994_WRITE_SEQUENCER_76               0x304C
-#define WM8994_WRITE_SEQUENCER_77               0x304D
-#define WM8994_WRITE_SEQUENCER_78               0x304E
-#define WM8994_WRITE_SEQUENCER_79               0x304F
-#define WM8994_WRITE_SEQUENCER_80               0x3050
-#define WM8994_WRITE_SEQUENCER_81               0x3051
-#define WM8994_WRITE_SEQUENCER_82               0x3052
-#define WM8994_WRITE_SEQUENCER_83               0x3053
-#define WM8994_WRITE_SEQUENCER_84               0x3054
-#define WM8994_WRITE_SEQUENCER_85               0x3055
-#define WM8994_WRITE_SEQUENCER_86               0x3056
-#define WM8994_WRITE_SEQUENCER_87               0x3057
-#define WM8994_WRITE_SEQUENCER_88               0x3058
-#define WM8994_WRITE_SEQUENCER_89               0x3059
-#define WM8994_WRITE_SEQUENCER_90               0x305A
-#define WM8994_WRITE_SEQUENCER_91               0x305B
-#define WM8994_WRITE_SEQUENCER_92               0x305C
-#define WM8994_WRITE_SEQUENCER_93               0x305D
-#define WM8994_WRITE_SEQUENCER_94               0x305E
-#define WM8994_WRITE_SEQUENCER_95               0x305F
-#define WM8994_WRITE_SEQUENCER_96               0x3060
-#define WM8994_WRITE_SEQUENCER_97               0x3061
-#define WM8994_WRITE_SEQUENCER_98               0x3062
-#define WM8994_WRITE_SEQUENCER_99               0x3063
-#define WM8994_WRITE_SEQUENCER_100              0x3064
-#define WM8994_WRITE_SEQUENCER_101              0x3065
-#define WM8994_WRITE_SEQUENCER_102              0x3066
-#define WM8994_WRITE_SEQUENCER_103              0x3067
-#define WM8994_WRITE_SEQUENCER_104              0x3068
-#define WM8994_WRITE_SEQUENCER_105              0x3069
-#define WM8994_WRITE_SEQUENCER_106              0x306A
-#define WM8994_WRITE_SEQUENCER_107              0x306B
-#define WM8994_WRITE_SEQUENCER_108              0x306C
-#define WM8994_WRITE_SEQUENCER_109              0x306D
-#define WM8994_WRITE_SEQUENCER_110              0x306E
-#define WM8994_WRITE_SEQUENCER_111              0x306F
-#define WM8994_WRITE_SEQUENCER_112              0x3070
-#define WM8994_WRITE_SEQUENCER_113              0x3071
-#define WM8994_WRITE_SEQUENCER_114              0x3072
-#define WM8994_WRITE_SEQUENCER_115              0x3073
-#define WM8994_WRITE_SEQUENCER_116              0x3074
-#define WM8994_WRITE_SEQUENCER_117              0x3075
-#define WM8994_WRITE_SEQUENCER_118              0x3076
-#define WM8994_WRITE_SEQUENCER_119              0x3077
-#define WM8994_WRITE_SEQUENCER_120              0x3078
-#define WM8994_WRITE_SEQUENCER_121              0x3079
-#define WM8994_WRITE_SEQUENCER_122              0x307A
-#define WM8994_WRITE_SEQUENCER_123              0x307B
-#define WM8994_WRITE_SEQUENCER_124              0x307C
-#define WM8994_WRITE_SEQUENCER_125              0x307D
-#define WM8994_WRITE_SEQUENCER_126              0x307E
-#define WM8994_WRITE_SEQUENCER_127              0x307F
-#define WM8994_WRITE_SEQUENCER_128              0x3080
-#define WM8994_WRITE_SEQUENCER_129              0x3081
-#define WM8994_WRITE_SEQUENCER_130              0x3082
-#define WM8994_WRITE_SEQUENCER_131              0x3083
-#define WM8994_WRITE_SEQUENCER_132              0x3084
-#define WM8994_WRITE_SEQUENCER_133              0x3085
-#define WM8994_WRITE_SEQUENCER_134              0x3086
-#define WM8994_WRITE_SEQUENCER_135              0x3087
-#define WM8994_WRITE_SEQUENCER_136              0x3088
-#define WM8994_WRITE_SEQUENCER_137              0x3089
-#define WM8994_WRITE_SEQUENCER_138              0x308A
-#define WM8994_WRITE_SEQUENCER_139              0x308B
-#define WM8994_WRITE_SEQUENCER_140              0x308C
-#define WM8994_WRITE_SEQUENCER_141              0x308D
-#define WM8994_WRITE_SEQUENCER_142              0x308E
-#define WM8994_WRITE_SEQUENCER_143              0x308F
-#define WM8994_WRITE_SEQUENCER_144              0x3090
-#define WM8994_WRITE_SEQUENCER_145              0x3091
-#define WM8994_WRITE_SEQUENCER_146              0x3092
-#define WM8994_WRITE_SEQUENCER_147              0x3093
-#define WM8994_WRITE_SEQUENCER_148              0x3094
-#define WM8994_WRITE_SEQUENCER_149              0x3095
-#define WM8994_WRITE_SEQUENCER_150              0x3096
-#define WM8994_WRITE_SEQUENCER_151              0x3097
-#define WM8994_WRITE_SEQUENCER_152              0x3098
-#define WM8994_WRITE_SEQUENCER_153              0x3099
-#define WM8994_WRITE_SEQUENCER_154              0x309A
-#define WM8994_WRITE_SEQUENCER_155              0x309B
-#define WM8994_WRITE_SEQUENCER_156              0x309C
-#define WM8994_WRITE_SEQUENCER_157              0x309D
-#define WM8994_WRITE_SEQUENCER_158              0x309E
-#define WM8994_WRITE_SEQUENCER_159              0x309F
-#define WM8994_WRITE_SEQUENCER_160              0x30A0
-#define WM8994_WRITE_SEQUENCER_161              0x30A1
-#define WM8994_WRITE_SEQUENCER_162              0x30A2
-#define WM8994_WRITE_SEQUENCER_163              0x30A3
-#define WM8994_WRITE_SEQUENCER_164              0x30A4
-#define WM8994_WRITE_SEQUENCER_165              0x30A5
-#define WM8994_WRITE_SEQUENCER_166              0x30A6
-#define WM8994_WRITE_SEQUENCER_167              0x30A7
-#define WM8994_WRITE_SEQUENCER_168              0x30A8
-#define WM8994_WRITE_SEQUENCER_169              0x30A9
-#define WM8994_WRITE_SEQUENCER_170              0x30AA
-#define WM8994_WRITE_SEQUENCER_171              0x30AB
-#define WM8994_WRITE_SEQUENCER_172              0x30AC
-#define WM8994_WRITE_SEQUENCER_173              0x30AD
-#define WM8994_WRITE_SEQUENCER_174              0x30AE
-#define WM8994_WRITE_SEQUENCER_175              0x30AF
-#define WM8994_WRITE_SEQUENCER_176              0x30B0
-#define WM8994_WRITE_SEQUENCER_177              0x30B1
-#define WM8994_WRITE_SEQUENCER_178              0x30B2
-#define WM8994_WRITE_SEQUENCER_179              0x30B3
-#define WM8994_WRITE_SEQUENCER_180              0x30B4
-#define WM8994_WRITE_SEQUENCER_181              0x30B5
-#define WM8994_WRITE_SEQUENCER_182              0x30B6
-#define WM8994_WRITE_SEQUENCER_183              0x30B7
-#define WM8994_WRITE_SEQUENCER_184              0x30B8
-#define WM8994_WRITE_SEQUENCER_185              0x30B9
-#define WM8994_WRITE_SEQUENCER_186              0x30BA
-#define WM8994_WRITE_SEQUENCER_187              0x30BB
-#define WM8994_WRITE_SEQUENCER_188              0x30BC
-#define WM8994_WRITE_SEQUENCER_189              0x30BD
-#define WM8994_WRITE_SEQUENCER_190              0x30BE
-#define WM8994_WRITE_SEQUENCER_191              0x30BF
-#define WM8994_WRITE_SEQUENCER_192              0x30C0
-#define WM8994_WRITE_SEQUENCER_193              0x30C1
-#define WM8994_WRITE_SEQUENCER_194              0x30C2
-#define WM8994_WRITE_SEQUENCER_195              0x30C3
-#define WM8994_WRITE_SEQUENCER_196              0x30C4
-#define WM8994_WRITE_SEQUENCER_197              0x30C5
-#define WM8994_WRITE_SEQUENCER_198              0x30C6
-#define WM8994_WRITE_SEQUENCER_199              0x30C7
-#define WM8994_WRITE_SEQUENCER_200              0x30C8
-#define WM8994_WRITE_SEQUENCER_201              0x30C9
-#define WM8994_WRITE_SEQUENCER_202              0x30CA
-#define WM8994_WRITE_SEQUENCER_203              0x30CB
-#define WM8994_WRITE_SEQUENCER_204              0x30CC
-#define WM8994_WRITE_SEQUENCER_205              0x30CD
-#define WM8994_WRITE_SEQUENCER_206              0x30CE
-#define WM8994_WRITE_SEQUENCER_207              0x30CF
-#define WM8994_WRITE_SEQUENCER_208              0x30D0
-#define WM8994_WRITE_SEQUENCER_209              0x30D1
-#define WM8994_WRITE_SEQUENCER_210              0x30D2
-#define WM8994_WRITE_SEQUENCER_211              0x30D3
-#define WM8994_WRITE_SEQUENCER_212              0x30D4
-#define WM8994_WRITE_SEQUENCER_213              0x30D5
-#define WM8994_WRITE_SEQUENCER_214              0x30D6
-#define WM8994_WRITE_SEQUENCER_215              0x30D7
-#define WM8994_WRITE_SEQUENCER_216              0x30D8
-#define WM8994_WRITE_SEQUENCER_217              0x30D9
-#define WM8994_WRITE_SEQUENCER_218              0x30DA
-#define WM8994_WRITE_SEQUENCER_219              0x30DB
-#define WM8994_WRITE_SEQUENCER_220              0x30DC
-#define WM8994_WRITE_SEQUENCER_221              0x30DD
-#define WM8994_WRITE_SEQUENCER_222              0x30DE
-#define WM8994_WRITE_SEQUENCER_223              0x30DF
-#define WM8994_WRITE_SEQUENCER_224              0x30E0
-#define WM8994_WRITE_SEQUENCER_225              0x30E1
-#define WM8994_WRITE_SEQUENCER_226              0x30E2
-#define WM8994_WRITE_SEQUENCER_227              0x30E3
-#define WM8994_WRITE_SEQUENCER_228              0x30E4
-#define WM8994_WRITE_SEQUENCER_229              0x30E5
-#define WM8994_WRITE_SEQUENCER_230              0x30E6
-#define WM8994_WRITE_SEQUENCER_231              0x30E7
-#define WM8994_WRITE_SEQUENCER_232              0x30E8
-#define WM8994_WRITE_SEQUENCER_233              0x30E9
-#define WM8994_WRITE_SEQUENCER_234              0x30EA
-#define WM8994_WRITE_SEQUENCER_235              0x30EB
-#define WM8994_WRITE_SEQUENCER_236              0x30EC
-#define WM8994_WRITE_SEQUENCER_237              0x30ED
-#define WM8994_WRITE_SEQUENCER_238              0x30EE
-#define WM8994_WRITE_SEQUENCER_239              0x30EF
-#define WM8994_WRITE_SEQUENCER_240              0x30F0
-#define WM8994_WRITE_SEQUENCER_241              0x30F1
-#define WM8994_WRITE_SEQUENCER_242              0x30F2
-#define WM8994_WRITE_SEQUENCER_243              0x30F3
-#define WM8994_WRITE_SEQUENCER_244              0x30F4
-#define WM8994_WRITE_SEQUENCER_245              0x30F5
-#define WM8994_WRITE_SEQUENCER_246              0x30F6
-#define WM8994_WRITE_SEQUENCER_247              0x30F7
-#define WM8994_WRITE_SEQUENCER_248              0x30F8
-#define WM8994_WRITE_SEQUENCER_249              0x30F9
-#define WM8994_WRITE_SEQUENCER_250              0x30FA
-#define WM8994_WRITE_SEQUENCER_251              0x30FB
-#define WM8994_WRITE_SEQUENCER_252              0x30FC
-#define WM8994_WRITE_SEQUENCER_253              0x30FD
-#define WM8994_WRITE_SEQUENCER_254              0x30FE
-#define WM8994_WRITE_SEQUENCER_255              0x30FF
-#define WM8994_WRITE_SEQUENCER_256              0x3100
-#define WM8994_WRITE_SEQUENCER_257              0x3101
-#define WM8994_WRITE_SEQUENCER_258              0x3102
-#define WM8994_WRITE_SEQUENCER_259              0x3103
-#define WM8994_WRITE_SEQUENCER_260              0x3104
-#define WM8994_WRITE_SEQUENCER_261              0x3105
-#define WM8994_WRITE_SEQUENCER_262              0x3106
-#define WM8994_WRITE_SEQUENCER_263              0x3107
-#define WM8994_WRITE_SEQUENCER_264              0x3108
-#define WM8994_WRITE_SEQUENCER_265              0x3109
-#define WM8994_WRITE_SEQUENCER_266              0x310A
-#define WM8994_WRITE_SEQUENCER_267              0x310B
-#define WM8994_WRITE_SEQUENCER_268              0x310C
-#define WM8994_WRITE_SEQUENCER_269              0x310D
-#define WM8994_WRITE_SEQUENCER_270              0x310E
-#define WM8994_WRITE_SEQUENCER_271              0x310F
-#define WM8994_WRITE_SEQUENCER_272              0x3110
-#define WM8994_WRITE_SEQUENCER_273              0x3111
-#define WM8994_WRITE_SEQUENCER_274              0x3112
-#define WM8994_WRITE_SEQUENCER_275              0x3113
-#define WM8994_WRITE_SEQUENCER_276              0x3114
-#define WM8994_WRITE_SEQUENCER_277              0x3115
-#define WM8994_WRITE_SEQUENCER_278              0x3116
-#define WM8994_WRITE_SEQUENCER_279              0x3117
-#define WM8994_WRITE_SEQUENCER_280              0x3118
-#define WM8994_WRITE_SEQUENCER_281              0x3119
-#define WM8994_WRITE_SEQUENCER_282              0x311A
-#define WM8994_WRITE_SEQUENCER_283              0x311B
-#define WM8994_WRITE_SEQUENCER_284              0x311C
-#define WM8994_WRITE_SEQUENCER_285              0x311D
-#define WM8994_WRITE_SEQUENCER_286              0x311E
-#define WM8994_WRITE_SEQUENCER_287              0x311F
-#define WM8994_WRITE_SEQUENCER_288              0x3120
-#define WM8994_WRITE_SEQUENCER_289              0x3121
-#define WM8994_WRITE_SEQUENCER_290              0x3122
-#define WM8994_WRITE_SEQUENCER_291              0x3123
-#define WM8994_WRITE_SEQUENCER_292              0x3124
-#define WM8994_WRITE_SEQUENCER_293              0x3125
-#define WM8994_WRITE_SEQUENCER_294              0x3126
-#define WM8994_WRITE_SEQUENCER_295              0x3127
-#define WM8994_WRITE_SEQUENCER_296              0x3128
-#define WM8994_WRITE_SEQUENCER_297              0x3129
-#define WM8994_WRITE_SEQUENCER_298              0x312A
-#define WM8994_WRITE_SEQUENCER_299              0x312B
-#define WM8994_WRITE_SEQUENCER_300              0x312C
-#define WM8994_WRITE_SEQUENCER_301              0x312D
-#define WM8994_WRITE_SEQUENCER_302              0x312E
-#define WM8994_WRITE_SEQUENCER_303              0x312F
-#define WM8994_WRITE_SEQUENCER_304              0x3130
-#define WM8994_WRITE_SEQUENCER_305              0x3131
-#define WM8994_WRITE_SEQUENCER_306              0x3132
-#define WM8994_WRITE_SEQUENCER_307              0x3133
-#define WM8994_WRITE_SEQUENCER_308              0x3134
-#define WM8994_WRITE_SEQUENCER_309              0x3135
-#define WM8994_WRITE_SEQUENCER_310              0x3136
-#define WM8994_WRITE_SEQUENCER_311              0x3137
-#define WM8994_WRITE_SEQUENCER_312              0x3138
-#define WM8994_WRITE_SEQUENCER_313              0x3139
-#define WM8994_WRITE_SEQUENCER_314              0x313A
-#define WM8994_WRITE_SEQUENCER_315              0x313B
-#define WM8994_WRITE_SEQUENCER_316              0x313C
-#define WM8994_WRITE_SEQUENCER_317              0x313D
-#define WM8994_WRITE_SEQUENCER_318              0x313E
-#define WM8994_WRITE_SEQUENCER_319              0x313F
-#define WM8994_WRITE_SEQUENCER_320              0x3140
-#define WM8994_WRITE_SEQUENCER_321              0x3141
-#define WM8994_WRITE_SEQUENCER_322              0x3142
-#define WM8994_WRITE_SEQUENCER_323              0x3143
-#define WM8994_WRITE_SEQUENCER_324              0x3144
-#define WM8994_WRITE_SEQUENCER_325              0x3145
-#define WM8994_WRITE_SEQUENCER_326              0x3146
-#define WM8994_WRITE_SEQUENCER_327              0x3147
-#define WM8994_WRITE_SEQUENCER_328              0x3148
-#define WM8994_WRITE_SEQUENCER_329              0x3149
-#define WM8994_WRITE_SEQUENCER_330              0x314A
-#define WM8994_WRITE_SEQUENCER_331              0x314B
-#define WM8994_WRITE_SEQUENCER_332              0x314C
-#define WM8994_WRITE_SEQUENCER_333              0x314D
-#define WM8994_WRITE_SEQUENCER_334              0x314E
-#define WM8994_WRITE_SEQUENCER_335              0x314F
-#define WM8994_WRITE_SEQUENCER_336              0x3150
-#define WM8994_WRITE_SEQUENCER_337              0x3151
-#define WM8994_WRITE_SEQUENCER_338              0x3152
-#define WM8994_WRITE_SEQUENCER_339              0x3153
-#define WM8994_WRITE_SEQUENCER_340              0x3154
-#define WM8994_WRITE_SEQUENCER_341              0x3155
-#define WM8994_WRITE_SEQUENCER_342              0x3156
-#define WM8994_WRITE_SEQUENCER_343              0x3157
-#define WM8994_WRITE_SEQUENCER_344              0x3158
-#define WM8994_WRITE_SEQUENCER_345              0x3159
-#define WM8994_WRITE_SEQUENCER_346              0x315A
-#define WM8994_WRITE_SEQUENCER_347              0x315B
-#define WM8994_WRITE_SEQUENCER_348              0x315C
-#define WM8994_WRITE_SEQUENCER_349              0x315D
-#define WM8994_WRITE_SEQUENCER_350              0x315E
-#define WM8994_WRITE_SEQUENCER_351              0x315F
-#define WM8994_WRITE_SEQUENCER_352              0x3160
-#define WM8994_WRITE_SEQUENCER_353              0x3161
-#define WM8994_WRITE_SEQUENCER_354              0x3162
-#define WM8994_WRITE_SEQUENCER_355              0x3163
-#define WM8994_WRITE_SEQUENCER_356              0x3164
-#define WM8994_WRITE_SEQUENCER_357              0x3165
-#define WM8994_WRITE_SEQUENCER_358              0x3166
-#define WM8994_WRITE_SEQUENCER_359              0x3167
-#define WM8994_WRITE_SEQUENCER_360              0x3168
-#define WM8994_WRITE_SEQUENCER_361              0x3169
-#define WM8994_WRITE_SEQUENCER_362              0x316A
-#define WM8994_WRITE_SEQUENCER_363              0x316B
-#define WM8994_WRITE_SEQUENCER_364              0x316C
-#define WM8994_WRITE_SEQUENCER_365              0x316D
-#define WM8994_WRITE_SEQUENCER_366              0x316E
-#define WM8994_WRITE_SEQUENCER_367              0x316F
-#define WM8994_WRITE_SEQUENCER_368              0x3170
-#define WM8994_WRITE_SEQUENCER_369              0x3171
-#define WM8994_WRITE_SEQUENCER_370              0x3172
-#define WM8994_WRITE_SEQUENCER_371              0x3173
-#define WM8994_WRITE_SEQUENCER_372              0x3174
-#define WM8994_WRITE_SEQUENCER_373              0x3175
-#define WM8994_WRITE_SEQUENCER_374              0x3176
-#define WM8994_WRITE_SEQUENCER_375              0x3177
-#define WM8994_WRITE_SEQUENCER_376              0x3178
-#define WM8994_WRITE_SEQUENCER_377              0x3179
-#define WM8994_WRITE_SEQUENCER_378              0x317A
-#define WM8994_WRITE_SEQUENCER_379              0x317B
-#define WM8994_WRITE_SEQUENCER_380              0x317C
-#define WM8994_WRITE_SEQUENCER_381              0x317D
-#define WM8994_WRITE_SEQUENCER_382              0x317E
-#define WM8994_WRITE_SEQUENCER_383              0x317F
-#define WM8994_WRITE_SEQUENCER_384              0x3180
-#define WM8994_WRITE_SEQUENCER_385              0x3181
-#define WM8994_WRITE_SEQUENCER_386              0x3182
-#define WM8994_WRITE_SEQUENCER_387              0x3183
-#define WM8994_WRITE_SEQUENCER_388              0x3184
-#define WM8994_WRITE_SEQUENCER_389              0x3185
-#define WM8994_WRITE_SEQUENCER_390              0x3186
-#define WM8994_WRITE_SEQUENCER_391              0x3187
-#define WM8994_WRITE_SEQUENCER_392              0x3188
-#define WM8994_WRITE_SEQUENCER_393              0x3189
-#define WM8994_WRITE_SEQUENCER_394              0x318A
-#define WM8994_WRITE_SEQUENCER_395              0x318B
-#define WM8994_WRITE_SEQUENCER_396              0x318C
-#define WM8994_WRITE_SEQUENCER_397              0x318D
-#define WM8994_WRITE_SEQUENCER_398              0x318E
-#define WM8994_WRITE_SEQUENCER_399              0x318F
-#define WM8994_WRITE_SEQUENCER_400              0x3190
-#define WM8994_WRITE_SEQUENCER_401              0x3191
-#define WM8994_WRITE_SEQUENCER_402              0x3192
-#define WM8994_WRITE_SEQUENCER_403              0x3193
-#define WM8994_WRITE_SEQUENCER_404              0x3194
-#define WM8994_WRITE_SEQUENCER_405              0x3195
-#define WM8994_WRITE_SEQUENCER_406              0x3196
-#define WM8994_WRITE_SEQUENCER_407              0x3197
-#define WM8994_WRITE_SEQUENCER_408              0x3198
-#define WM8994_WRITE_SEQUENCER_409              0x3199
-#define WM8994_WRITE_SEQUENCER_410              0x319A
-#define WM8994_WRITE_SEQUENCER_411              0x319B
-#define WM8994_WRITE_SEQUENCER_412              0x319C
-#define WM8994_WRITE_SEQUENCER_413              0x319D
-#define WM8994_WRITE_SEQUENCER_414              0x319E
-#define WM8994_WRITE_SEQUENCER_415              0x319F
-#define WM8994_WRITE_SEQUENCER_416              0x31A0
-#define WM8994_WRITE_SEQUENCER_417              0x31A1
-#define WM8994_WRITE_SEQUENCER_418              0x31A2
-#define WM8994_WRITE_SEQUENCER_419              0x31A3
-#define WM8994_WRITE_SEQUENCER_420              0x31A4
-#define WM8994_WRITE_SEQUENCER_421              0x31A5
-#define WM8994_WRITE_SEQUENCER_422              0x31A6
-#define WM8994_WRITE_SEQUENCER_423              0x31A7
-#define WM8994_WRITE_SEQUENCER_424              0x31A8
-#define WM8994_WRITE_SEQUENCER_425              0x31A9
-#define WM8994_WRITE_SEQUENCER_426              0x31AA
-#define WM8994_WRITE_SEQUENCER_427              0x31AB
-#define WM8994_WRITE_SEQUENCER_428              0x31AC
-#define WM8994_WRITE_SEQUENCER_429              0x31AD
-#define WM8994_WRITE_SEQUENCER_430              0x31AE
-#define WM8994_WRITE_SEQUENCER_431              0x31AF
-#define WM8994_WRITE_SEQUENCER_432              0x31B0
-#define WM8994_WRITE_SEQUENCER_433              0x31B1
-#define WM8994_WRITE_SEQUENCER_434              0x31B2
-#define WM8994_WRITE_SEQUENCER_435              0x31B3
-#define WM8994_WRITE_SEQUENCER_436              0x31B4
-#define WM8994_WRITE_SEQUENCER_437              0x31B5
-#define WM8994_WRITE_SEQUENCER_438              0x31B6
-#define WM8994_WRITE_SEQUENCER_439              0x31B7
-#define WM8994_WRITE_SEQUENCER_440              0x31B8
-#define WM8994_WRITE_SEQUENCER_441              0x31B9
-#define WM8994_WRITE_SEQUENCER_442              0x31BA
-#define WM8994_WRITE_SEQUENCER_443              0x31BB
-#define WM8994_WRITE_SEQUENCER_444              0x31BC
-#define WM8994_WRITE_SEQUENCER_445              0x31BD
-#define WM8994_WRITE_SEQUENCER_446              0x31BE
-#define WM8994_WRITE_SEQUENCER_447              0x31BF
-#define WM8994_WRITE_SEQUENCER_448              0x31C0
-#define WM8994_WRITE_SEQUENCER_449              0x31C1
-#define WM8994_WRITE_SEQUENCER_450              0x31C2
-#define WM8994_WRITE_SEQUENCER_451              0x31C3
-#define WM8994_WRITE_SEQUENCER_452              0x31C4
-#define WM8994_WRITE_SEQUENCER_453              0x31C5
-#define WM8994_WRITE_SEQUENCER_454              0x31C6
-#define WM8994_WRITE_SEQUENCER_455              0x31C7
-#define WM8994_WRITE_SEQUENCER_456              0x31C8
-#define WM8994_WRITE_SEQUENCER_457              0x31C9
-#define WM8994_WRITE_SEQUENCER_458              0x31CA
-#define WM8994_WRITE_SEQUENCER_459              0x31CB
-#define WM8994_WRITE_SEQUENCER_460              0x31CC
-#define WM8994_WRITE_SEQUENCER_461              0x31CD
-#define WM8994_WRITE_SEQUENCER_462              0x31CE
-#define WM8994_WRITE_SEQUENCER_463              0x31CF
-#define WM8994_WRITE_SEQUENCER_464              0x31D0
-#define WM8994_WRITE_SEQUENCER_465              0x31D1
-#define WM8994_WRITE_SEQUENCER_466              0x31D2
-#define WM8994_WRITE_SEQUENCER_467              0x31D3
-#define WM8994_WRITE_SEQUENCER_468              0x31D4
-#define WM8994_WRITE_SEQUENCER_469              0x31D5
-#define WM8994_WRITE_SEQUENCER_470              0x31D6
-#define WM8994_WRITE_SEQUENCER_471              0x31D7
-#define WM8994_WRITE_SEQUENCER_472              0x31D8
-#define WM8994_WRITE_SEQUENCER_473              0x31D9
-#define WM8994_WRITE_SEQUENCER_474              0x31DA
-#define WM8994_WRITE_SEQUENCER_475              0x31DB
-#define WM8994_WRITE_SEQUENCER_476              0x31DC
-#define WM8994_WRITE_SEQUENCER_477              0x31DD
-#define WM8994_WRITE_SEQUENCER_478              0x31DE
-#define WM8994_WRITE_SEQUENCER_479              0x31DF
-#define WM8994_WRITE_SEQUENCER_480              0x31E0
-#define WM8994_WRITE_SEQUENCER_481              0x31E1
-#define WM8994_WRITE_SEQUENCER_482              0x31E2
-#define WM8994_WRITE_SEQUENCER_483              0x31E3
-#define WM8994_WRITE_SEQUENCER_484              0x31E4
-#define WM8994_WRITE_SEQUENCER_485              0x31E5
-#define WM8994_WRITE_SEQUENCER_486              0x31E6
-#define WM8994_WRITE_SEQUENCER_487              0x31E7
-#define WM8994_WRITE_SEQUENCER_488              0x31E8
-#define WM8994_WRITE_SEQUENCER_489              0x31E9
-#define WM8994_WRITE_SEQUENCER_490              0x31EA
-#define WM8994_WRITE_SEQUENCER_491              0x31EB
-#define WM8994_WRITE_SEQUENCER_492              0x31EC
-#define WM8994_WRITE_SEQUENCER_493              0x31ED
-#define WM8994_WRITE_SEQUENCER_494              0x31EE
-#define WM8994_WRITE_SEQUENCER_495              0x31EF
-#define WM8994_WRITE_SEQUENCER_496              0x31F0
-#define WM8994_WRITE_SEQUENCER_497              0x31F1
-#define WM8994_WRITE_SEQUENCER_498              0x31F2
-#define WM8994_WRITE_SEQUENCER_499              0x31F3
-#define WM8994_WRITE_SEQUENCER_500              0x31F4
-#define WM8994_WRITE_SEQUENCER_501              0x31F5
-#define WM8994_WRITE_SEQUENCER_502              0x31F6
-#define WM8994_WRITE_SEQUENCER_503              0x31F7
-#define WM8994_WRITE_SEQUENCER_504              0x31F8
-#define WM8994_WRITE_SEQUENCER_505              0x31F9
-#define WM8994_WRITE_SEQUENCER_506              0x31FA
-#define WM8994_WRITE_SEQUENCER_507              0x31FB
-#define WM8994_WRITE_SEQUENCER_508              0x31FC
-#define WM8994_WRITE_SEQUENCER_509              0x31FD
-#define WM8994_WRITE_SEQUENCER_510              0x31FE
-#define WM8994_WRITE_SEQUENCER_511              0x31FF
-
-#define WM8994_REGISTER_COUNT                   736
-#define WM8994_MAX_REGISTER                     0x31FF
-#define WM8994_MAX_CACHED_REGISTER              0x749
-
-/*
- * Field Definitions.
- */
-
-/*
- * R0 (0x00) - Software Reset
- */
-#define WM8994_SW_RESET_MASK                    0xFFFF  /* SW_RESET - [15:0] */
-#define WM8994_SW_RESET_SHIFT                        0  /* SW_RESET - [15:0] */
-#define WM8994_SW_RESET_WIDTH                       16  /* SW_RESET - [15:0] */
-
-/*
- * R1 (0x01) - Power Management (1)
- */
-#define WM8994_SPKOUTR_ENA                      0x2000  /* SPKOUTR_ENA */
-#define WM8994_SPKOUTR_ENA_MASK                 0x2000  /* SPKOUTR_ENA */
-#define WM8994_SPKOUTR_ENA_SHIFT                    13  /* SPKOUTR_ENA */
-#define WM8994_SPKOUTR_ENA_WIDTH                     1  /* SPKOUTR_ENA */
-#define WM8994_SPKOUTL_ENA                      0x1000  /* SPKOUTL_ENA */
-#define WM8994_SPKOUTL_ENA_MASK                 0x1000  /* SPKOUTL_ENA */
-#define WM8994_SPKOUTL_ENA_SHIFT                    12  /* SPKOUTL_ENA */
-#define WM8994_SPKOUTL_ENA_WIDTH                     1  /* SPKOUTL_ENA */
-#define WM8994_HPOUT2_ENA                       0x0800  /* HPOUT2_ENA */
-#define WM8994_HPOUT2_ENA_MASK                  0x0800  /* HPOUT2_ENA */
-#define WM8994_HPOUT2_ENA_SHIFT                     11  /* HPOUT2_ENA */
-#define WM8994_HPOUT2_ENA_WIDTH                      1  /* HPOUT2_ENA */
-#define WM8994_HPOUT1L_ENA                      0x0200  /* HPOUT1L_ENA */
-#define WM8994_HPOUT1L_ENA_MASK                 0x0200  /* HPOUT1L_ENA */
-#define WM8994_HPOUT1L_ENA_SHIFT                     9  /* HPOUT1L_ENA */
-#define WM8994_HPOUT1L_ENA_WIDTH                     1  /* HPOUT1L_ENA */
-#define WM8994_HPOUT1R_ENA                      0x0100  /* HPOUT1R_ENA */
-#define WM8994_HPOUT1R_ENA_MASK                 0x0100  /* HPOUT1R_ENA */
-#define WM8994_HPOUT1R_ENA_SHIFT                     8  /* HPOUT1R_ENA */
-#define WM8994_HPOUT1R_ENA_WIDTH                     1  /* HPOUT1R_ENA */
-#define WM8994_MICB2_ENA                        0x0020  /* MICB2_ENA */
-#define WM8994_MICB2_ENA_MASK                   0x0020  /* MICB2_ENA */
-#define WM8994_MICB2_ENA_SHIFT                       5  /* MICB2_ENA */
-#define WM8994_MICB2_ENA_WIDTH                       1  /* MICB2_ENA */
-#define WM8994_MICB1_ENA                        0x0010  /* MICB1_ENA */
-#define WM8994_MICB1_ENA_MASK                   0x0010  /* MICB1_ENA */
-#define WM8994_MICB1_ENA_SHIFT                       4  /* MICB1_ENA */
-#define WM8994_MICB1_ENA_WIDTH                       1  /* MICB1_ENA */
-#define WM8994_VMID_SEL_MASK                    0x0006  /* VMID_SEL - [2:1] */
-#define WM8994_VMID_SEL_SHIFT                        1  /* VMID_SEL - [2:1] */
-#define WM8994_VMID_SEL_WIDTH                        2  /* VMID_SEL - [2:1] */
-#define WM8994_BIAS_ENA                         0x0001  /* BIAS_ENA */
-#define WM8994_BIAS_ENA_MASK                    0x0001  /* BIAS_ENA */
-#define WM8994_BIAS_ENA_SHIFT                        0  /* BIAS_ENA */
-#define WM8994_BIAS_ENA_WIDTH                        1  /* BIAS_ENA */
-
-/*
- * R2 (0x02) - Power Management (2)
- */
-#define WM8994_TSHUT_ENA                        0x4000  /* TSHUT_ENA */
-#define WM8994_TSHUT_ENA_MASK                   0x4000  /* TSHUT_ENA */
-#define WM8994_TSHUT_ENA_SHIFT                      14  /* TSHUT_ENA */
-#define WM8994_TSHUT_ENA_WIDTH                       1  /* TSHUT_ENA */
-#define WM8994_TSHUT_OPDIS                      0x2000  /* TSHUT_OPDIS */
-#define WM8994_TSHUT_OPDIS_MASK                 0x2000  /* TSHUT_OPDIS */
-#define WM8994_TSHUT_OPDIS_SHIFT                    13  /* TSHUT_OPDIS */
-#define WM8994_TSHUT_OPDIS_WIDTH                     1  /* TSHUT_OPDIS */
-#define WM8994_OPCLK_ENA                        0x0800  /* OPCLK_ENA */
-#define WM8994_OPCLK_ENA_MASK                   0x0800  /* OPCLK_ENA */
-#define WM8994_OPCLK_ENA_SHIFT                      11  /* OPCLK_ENA */
-#define WM8994_OPCLK_ENA_WIDTH                       1  /* OPCLK_ENA */
-#define WM8994_MIXINL_ENA                       0x0200  /* MIXINL_ENA */
-#define WM8994_MIXINL_ENA_MASK                  0x0200  /* MIXINL_ENA */
-#define WM8994_MIXINL_ENA_SHIFT                      9  /* MIXINL_ENA */
-#define WM8994_MIXINL_ENA_WIDTH                      1  /* MIXINL_ENA */
-#define WM8994_MIXINR_ENA                       0x0100  /* MIXINR_ENA */
-#define WM8994_MIXINR_ENA_MASK                  0x0100  /* MIXINR_ENA */
-#define WM8994_MIXINR_ENA_SHIFT                      8  /* MIXINR_ENA */
-#define WM8994_MIXINR_ENA_WIDTH                      1  /* MIXINR_ENA */
-#define WM8994_IN2L_ENA                         0x0080  /* IN2L_ENA */
-#define WM8994_IN2L_ENA_MASK                    0x0080  /* IN2L_ENA */
-#define WM8994_IN2L_ENA_SHIFT                        7  /* IN2L_ENA */
-#define WM8994_IN2L_ENA_WIDTH                        1  /* IN2L_ENA */
-#define WM8994_IN1L_ENA                         0x0040  /* IN1L_ENA */
-#define WM8994_IN1L_ENA_MASK                    0x0040  /* IN1L_ENA */
-#define WM8994_IN1L_ENA_SHIFT                        6  /* IN1L_ENA */
-#define WM8994_IN1L_ENA_WIDTH                        1  /* IN1L_ENA */
-#define WM8994_IN2R_ENA                         0x0020  /* IN2R_ENA */
-#define WM8994_IN2R_ENA_MASK                    0x0020  /* IN2R_ENA */
-#define WM8994_IN2R_ENA_SHIFT                        5  /* IN2R_ENA */
-#define WM8994_IN2R_ENA_WIDTH                        1  /* IN2R_ENA */
-#define WM8994_IN1R_ENA                         0x0010  /* IN1R_ENA */
-#define WM8994_IN1R_ENA_MASK                    0x0010  /* IN1R_ENA */
-#define WM8994_IN1R_ENA_SHIFT                        4  /* IN1R_ENA */
-#define WM8994_IN1R_ENA_WIDTH                        1  /* IN1R_ENA */
-
-/*
- * R3 (0x03) - Power Management (3)
- */
-#define WM8994_LINEOUT1N_ENA                    0x2000  /* LINEOUT1N_ENA */
-#define WM8994_LINEOUT1N_ENA_MASK               0x2000  /* LINEOUT1N_ENA */
-#define WM8994_LINEOUT1N_ENA_SHIFT                  13  /* LINEOUT1N_ENA */
-#define WM8994_LINEOUT1N_ENA_WIDTH                   1  /* LINEOUT1N_ENA */
-#define WM8994_LINEOUT1P_ENA                    0x1000  /* LINEOUT1P_ENA */
-#define WM8994_LINEOUT1P_ENA_MASK               0x1000  /* LINEOUT1P_ENA */
-#define WM8994_LINEOUT1P_ENA_SHIFT                  12  /* LINEOUT1P_ENA */
-#define WM8994_LINEOUT1P_ENA_WIDTH                   1  /* LINEOUT1P_ENA */
-#define WM8994_LINEOUT2N_ENA                    0x0800  /* LINEOUT2N_ENA */
-#define WM8994_LINEOUT2N_ENA_MASK               0x0800  /* LINEOUT2N_ENA */
-#define WM8994_LINEOUT2N_ENA_SHIFT                  11  /* LINEOUT2N_ENA */
-#define WM8994_LINEOUT2N_ENA_WIDTH                   1  /* LINEOUT2N_ENA */
-#define WM8994_LINEOUT2P_ENA                    0x0400  /* LINEOUT2P_ENA */
-#define WM8994_LINEOUT2P_ENA_MASK               0x0400  /* LINEOUT2P_ENA */
-#define WM8994_LINEOUT2P_ENA_SHIFT                  10  /* LINEOUT2P_ENA */
-#define WM8994_LINEOUT2P_ENA_WIDTH                   1  /* LINEOUT2P_ENA */
-#define WM8994_SPKRVOL_ENA                      0x0200  /* SPKRVOL_ENA */
-#define WM8994_SPKRVOL_ENA_MASK                 0x0200  /* SPKRVOL_ENA */
-#define WM8994_SPKRVOL_ENA_SHIFT                     9  /* SPKRVOL_ENA */
-#define WM8994_SPKRVOL_ENA_WIDTH                     1  /* SPKRVOL_ENA */
-#define WM8994_SPKLVOL_ENA                      0x0100  /* SPKLVOL_ENA */
-#define WM8994_SPKLVOL_ENA_MASK                 0x0100  /* SPKLVOL_ENA */
-#define WM8994_SPKLVOL_ENA_SHIFT                     8  /* SPKLVOL_ENA */
-#define WM8994_SPKLVOL_ENA_WIDTH                     1  /* SPKLVOL_ENA */
-#define WM8994_MIXOUTLVOL_ENA                   0x0080  /* MIXOUTLVOL_ENA */
-#define WM8994_MIXOUTLVOL_ENA_MASK              0x0080  /* MIXOUTLVOL_ENA */
-#define WM8994_MIXOUTLVOL_ENA_SHIFT                  7  /* MIXOUTLVOL_ENA */
-#define WM8994_MIXOUTLVOL_ENA_WIDTH                  1  /* MIXOUTLVOL_ENA */
-#define WM8994_MIXOUTRVOL_ENA                   0x0040  /* MIXOUTRVOL_ENA */
-#define WM8994_MIXOUTRVOL_ENA_MASK              0x0040  /* MIXOUTRVOL_ENA */
-#define WM8994_MIXOUTRVOL_ENA_SHIFT                  6  /* MIXOUTRVOL_ENA */
-#define WM8994_MIXOUTRVOL_ENA_WIDTH                  1  /* MIXOUTRVOL_ENA */
-#define WM8994_MIXOUTL_ENA                      0x0020  /* MIXOUTL_ENA */
-#define WM8994_MIXOUTL_ENA_MASK                 0x0020  /* MIXOUTL_ENA */
-#define WM8994_MIXOUTL_ENA_SHIFT                     5  /* MIXOUTL_ENA */
-#define WM8994_MIXOUTL_ENA_WIDTH                     1  /* MIXOUTL_ENA */
-#define WM8994_MIXOUTR_ENA                      0x0010  /* MIXOUTR_ENA */
-#define WM8994_MIXOUTR_ENA_MASK                 0x0010  /* MIXOUTR_ENA */
-#define WM8994_MIXOUTR_ENA_SHIFT                     4  /* MIXOUTR_ENA */
-#define WM8994_MIXOUTR_ENA_WIDTH                     1  /* MIXOUTR_ENA */
-
-/*
- * R4 (0x04) - Power Management (4)
- */
-#define WM8994_AIF2ADCL_ENA                     0x2000  /* AIF2ADCL_ENA */
-#define WM8994_AIF2ADCL_ENA_MASK                0x2000  /* AIF2ADCL_ENA */
-#define WM8994_AIF2ADCL_ENA_SHIFT                   13  /* AIF2ADCL_ENA */
-#define WM8994_AIF2ADCL_ENA_WIDTH                    1  /* AIF2ADCL_ENA */
-#define WM8994_AIF2ADCR_ENA                     0x1000  /* AIF2ADCR_ENA */
-#define WM8994_AIF2ADCR_ENA_MASK                0x1000  /* AIF2ADCR_ENA */
-#define WM8994_AIF2ADCR_ENA_SHIFT                   12  /* AIF2ADCR_ENA */
-#define WM8994_AIF2ADCR_ENA_WIDTH                    1  /* AIF2ADCR_ENA */
-#define WM8994_AIF1ADC2L_ENA                    0x0800  /* AIF1ADC2L_ENA */
-#define WM8994_AIF1ADC2L_ENA_MASK               0x0800  /* AIF1ADC2L_ENA */
-#define WM8994_AIF1ADC2L_ENA_SHIFT                  11  /* AIF1ADC2L_ENA */
-#define WM8994_AIF1ADC2L_ENA_WIDTH                   1  /* AIF1ADC2L_ENA */
-#define WM8994_AIF1ADC2R_ENA                    0x0400  /* AIF1ADC2R_ENA */
-#define WM8994_AIF1ADC2R_ENA_MASK               0x0400  /* AIF1ADC2R_ENA */
-#define WM8994_AIF1ADC2R_ENA_SHIFT                  10  /* AIF1ADC2R_ENA */
-#define WM8994_AIF1ADC2R_ENA_WIDTH                   1  /* AIF1ADC2R_ENA */
-#define WM8994_AIF1ADC1L_ENA                    0x0200  /* AIF1ADC1L_ENA */
-#define WM8994_AIF1ADC1L_ENA_MASK               0x0200  /* AIF1ADC1L_ENA */
-#define WM8994_AIF1ADC1L_ENA_SHIFT                   9  /* AIF1ADC1L_ENA */
-#define WM8994_AIF1ADC1L_ENA_WIDTH                   1  /* AIF1ADC1L_ENA */
-#define WM8994_AIF1ADC1R_ENA                    0x0100  /* AIF1ADC1R_ENA */
-#define WM8994_AIF1ADC1R_ENA_MASK               0x0100  /* AIF1ADC1R_ENA */
-#define WM8994_AIF1ADC1R_ENA_SHIFT                   8  /* AIF1ADC1R_ENA */
-#define WM8994_AIF1ADC1R_ENA_WIDTH                   1  /* AIF1ADC1R_ENA */
-#define WM8994_DMIC2L_ENA                       0x0020  /* DMIC2L_ENA */
-#define WM8994_DMIC2L_ENA_MASK                  0x0020  /* DMIC2L_ENA */
-#define WM8994_DMIC2L_ENA_SHIFT                      5  /* DMIC2L_ENA */
-#define WM8994_DMIC2L_ENA_WIDTH                      1  /* DMIC2L_ENA */
-#define WM8994_DMIC2R_ENA                       0x0010  /* DMIC2R_ENA */
-#define WM8994_DMIC2R_ENA_MASK                  0x0010  /* DMIC2R_ENA */
-#define WM8994_DMIC2R_ENA_SHIFT                      4  /* DMIC2R_ENA */
-#define WM8994_DMIC2R_ENA_WIDTH                      1  /* DMIC2R_ENA */
-#define WM8994_DMIC1L_ENA                       0x0008  /* DMIC1L_ENA */
-#define WM8994_DMIC1L_ENA_MASK                  0x0008  /* DMIC1L_ENA */
-#define WM8994_DMIC1L_ENA_SHIFT                      3  /* DMIC1L_ENA */
-#define WM8994_DMIC1L_ENA_WIDTH                      1  /* DMIC1L_ENA */
-#define WM8994_DMIC1R_ENA                       0x0004  /* DMIC1R_ENA */
-#define WM8994_DMIC1R_ENA_MASK                  0x0004  /* DMIC1R_ENA */
-#define WM8994_DMIC1R_ENA_SHIFT                      2  /* DMIC1R_ENA */
-#define WM8994_DMIC1R_ENA_WIDTH                      1  /* DMIC1R_ENA */
-#define WM8994_ADCL_ENA                         0x0002  /* ADCL_ENA */
-#define WM8994_ADCL_ENA_MASK                    0x0002  /* ADCL_ENA */
-#define WM8994_ADCL_ENA_SHIFT                        1  /* ADCL_ENA */
-#define WM8994_ADCL_ENA_WIDTH                        1  /* ADCL_ENA */
-#define WM8994_ADCR_ENA                         0x0001  /* ADCR_ENA */
-#define WM8994_ADCR_ENA_MASK                    0x0001  /* ADCR_ENA */
-#define WM8994_ADCR_ENA_SHIFT                        0  /* ADCR_ENA */
-#define WM8994_ADCR_ENA_WIDTH                        1  /* ADCR_ENA */
-
-/*
- * R5 (0x05) - Power Management (5)
- */
-#define WM8994_AIF2DACL_ENA                     0x2000  /* AIF2DACL_ENA */
-#define WM8994_AIF2DACL_ENA_MASK                0x2000  /* AIF2DACL_ENA */
-#define WM8994_AIF2DACL_ENA_SHIFT                   13  /* AIF2DACL_ENA */
-#define WM8994_AIF2DACL_ENA_WIDTH                    1  /* AIF2DACL_ENA */
-#define WM8994_AIF2DACR_ENA                     0x1000  /* AIF2DACR_ENA */
-#define WM8994_AIF2DACR_ENA_MASK                0x1000  /* AIF2DACR_ENA */
-#define WM8994_AIF2DACR_ENA_SHIFT                   12  /* AIF2DACR_ENA */
-#define WM8994_AIF2DACR_ENA_WIDTH                    1  /* AIF2DACR_ENA */
-#define WM8994_AIF1DAC2L_ENA                    0x0800  /* AIF1DAC2L_ENA */
-#define WM8994_AIF1DAC2L_ENA_MASK               0x0800  /* AIF1DAC2L_ENA */
-#define WM8994_AIF1DAC2L_ENA_SHIFT                  11  /* AIF1DAC2L_ENA */
-#define WM8994_AIF1DAC2L_ENA_WIDTH                   1  /* AIF1DAC2L_ENA */
-#define WM8994_AIF1DAC2R_ENA                    0x0400  /* AIF1DAC2R_ENA */
-#define WM8994_AIF1DAC2R_ENA_MASK               0x0400  /* AIF1DAC2R_ENA */
-#define WM8994_AIF1DAC2R_ENA_SHIFT                  10  /* AIF1DAC2R_ENA */
-#define WM8994_AIF1DAC2R_ENA_WIDTH                   1  /* AIF1DAC2R_ENA */
-#define WM8994_AIF1DAC1L_ENA                    0x0200  /* AIF1DAC1L_ENA */
-#define WM8994_AIF1DAC1L_ENA_MASK               0x0200  /* AIF1DAC1L_ENA */
-#define WM8994_AIF1DAC1L_ENA_SHIFT                   9  /* AIF1DAC1L_ENA */
-#define WM8994_AIF1DAC1L_ENA_WIDTH                   1  /* AIF1DAC1L_ENA */
-#define WM8994_AIF1DAC1R_ENA                    0x0100  /* AIF1DAC1R_ENA */
-#define WM8994_AIF1DAC1R_ENA_MASK               0x0100  /* AIF1DAC1R_ENA */
-#define WM8994_AIF1DAC1R_ENA_SHIFT                   8  /* AIF1DAC1R_ENA */
-#define WM8994_AIF1DAC1R_ENA_WIDTH                   1  /* AIF1DAC1R_ENA */
-#define WM8994_DAC2L_ENA                        0x0008  /* DAC2L_ENA */
-#define WM8994_DAC2L_ENA_MASK                   0x0008  /* DAC2L_ENA */
-#define WM8994_DAC2L_ENA_SHIFT                       3  /* DAC2L_ENA */
-#define WM8994_DAC2L_ENA_WIDTH                       1  /* DAC2L_ENA */
-#define WM8994_DAC2R_ENA                        0x0004  /* DAC2R_ENA */
-#define WM8994_DAC2R_ENA_MASK                   0x0004  /* DAC2R_ENA */
-#define WM8994_DAC2R_ENA_SHIFT                       2  /* DAC2R_ENA */
-#define WM8994_DAC2R_ENA_WIDTH                       1  /* DAC2R_ENA */
-#define WM8994_DAC1L_ENA                        0x0002  /* DAC1L_ENA */
-#define WM8994_DAC1L_ENA_MASK                   0x0002  /* DAC1L_ENA */
-#define WM8994_DAC1L_ENA_SHIFT                       1  /* DAC1L_ENA */
-#define WM8994_DAC1L_ENA_WIDTH                       1  /* DAC1L_ENA */
-#define WM8994_DAC1R_ENA                        0x0001  /* DAC1R_ENA */
-#define WM8994_DAC1R_ENA_MASK                   0x0001  /* DAC1R_ENA */
-#define WM8994_DAC1R_ENA_SHIFT                       0  /* DAC1R_ENA */
-#define WM8994_DAC1R_ENA_WIDTH                       1  /* DAC1R_ENA */
-
-/*
- * R6 (0x06) - Power Management (6)
- */
-#define WM8958_AIF3ADC_SRC_MASK                 0x0600  /* AIF3ADC_SRC - [10:9] */
-#define WM8958_AIF3ADC_SRC_SHIFT                     9  /* AIF3ADC_SRC - [10:9] */
-#define WM8958_AIF3ADC_SRC_WIDTH                     2  /* AIF3ADC_SRC - [10:9] */
-#define WM8958_AIF2DAC_SRC_MASK                 0x0180  /* AIF2DAC_SRC - [8:7] */
-#define WM8958_AIF2DAC_SRC_SHIFT                     7  /* AIF2DAC_SRC - [8:7] */
-#define WM8958_AIF2DAC_SRC_WIDTH                     2  /* AIF2DAC_SRC - [8:7] */
-#define WM8994_AIF3_TRI                         0x0020  /* AIF3_TRI */
-#define WM8994_AIF3_TRI_MASK                    0x0020  /* AIF3_TRI */
-#define WM8994_AIF3_TRI_SHIFT                        5  /* AIF3_TRI */
-#define WM8994_AIF3_TRI_WIDTH                        1  /* AIF3_TRI */
-#define WM8994_AIF3_ADCDAT_SRC_MASK             0x0018  /* AIF3_ADCDAT_SRC - [4:3] */
-#define WM8994_AIF3_ADCDAT_SRC_SHIFT                 3  /* AIF3_ADCDAT_SRC - [4:3] */
-#define WM8994_AIF3_ADCDAT_SRC_WIDTH                 2  /* AIF3_ADCDAT_SRC - [4:3] */
-#define WM8994_AIF2_ADCDAT_SRC                  0x0004  /* AIF2_ADCDAT_SRC */
-#define WM8994_AIF2_ADCDAT_SRC_MASK             0x0004  /* AIF2_ADCDAT_SRC */
-#define WM8994_AIF2_ADCDAT_SRC_SHIFT                 2  /* AIF2_ADCDAT_SRC */
-#define WM8994_AIF2_ADCDAT_SRC_WIDTH                 1  /* AIF2_ADCDAT_SRC */
-#define WM8994_AIF2_DACDAT_SRC                  0x0002  /* AIF2_DACDAT_SRC */
-#define WM8994_AIF2_DACDAT_SRC_MASK             0x0002  /* AIF2_DACDAT_SRC */
-#define WM8994_AIF2_DACDAT_SRC_SHIFT                 1  /* AIF2_DACDAT_SRC */
-#define WM8994_AIF2_DACDAT_SRC_WIDTH                 1  /* AIF2_DACDAT_SRC */
-#define WM8994_AIF1_DACDAT_SRC                  0x0001  /* AIF1_DACDAT_SRC */
-#define WM8994_AIF1_DACDAT_SRC_MASK             0x0001  /* AIF1_DACDAT_SRC */
-#define WM8994_AIF1_DACDAT_SRC_SHIFT                 0  /* AIF1_DACDAT_SRC */
-#define WM8994_AIF1_DACDAT_SRC_WIDTH                 1  /* AIF1_DACDAT_SRC */
-
-/*
- * R21 (0x15) - Input Mixer (1)
- */
-#define WM8994_IN1RP_MIXINR_BOOST               0x0100  /* IN1RP_MIXINR_BOOST */
-#define WM8994_IN1RP_MIXINR_BOOST_MASK          0x0100  /* IN1RP_MIXINR_BOOST */
-#define WM8994_IN1RP_MIXINR_BOOST_SHIFT              8  /* IN1RP_MIXINR_BOOST */
-#define WM8994_IN1RP_MIXINR_BOOST_WIDTH              1  /* IN1RP_MIXINR_BOOST */
-#define WM8994_IN1LP_MIXINL_BOOST               0x0080  /* IN1LP_MIXINL_BOOST */
-#define WM8994_IN1LP_MIXINL_BOOST_MASK          0x0080  /* IN1LP_MIXINL_BOOST */
-#define WM8994_IN1LP_MIXINL_BOOST_SHIFT              7  /* IN1LP_MIXINL_BOOST */
-#define WM8994_IN1LP_MIXINL_BOOST_WIDTH              1  /* IN1LP_MIXINL_BOOST */
-#define WM8994_INPUTS_CLAMP                     0x0040  /* INPUTS_CLAMP */
-#define WM8994_INPUTS_CLAMP_MASK                0x0040  /* INPUTS_CLAMP */
-#define WM8994_INPUTS_CLAMP_SHIFT                    6  /* INPUTS_CLAMP */
-#define WM8994_INPUTS_CLAMP_WIDTH                    1  /* INPUTS_CLAMP */
-
-/*
- * R24 (0x18) - Left Line Input 1&2 Volume
- */
-#define WM8994_IN1_VU                           0x0100  /* IN1_VU */
-#define WM8994_IN1_VU_MASK                      0x0100  /* IN1_VU */
-#define WM8994_IN1_VU_SHIFT                          8  /* IN1_VU */
-#define WM8994_IN1_VU_WIDTH                          1  /* IN1_VU */
-#define WM8994_IN1L_MUTE                        0x0080  /* IN1L_MUTE */
-#define WM8994_IN1L_MUTE_MASK                   0x0080  /* IN1L_MUTE */
-#define WM8994_IN1L_MUTE_SHIFT                       7  /* IN1L_MUTE */
-#define WM8994_IN1L_MUTE_WIDTH                       1  /* IN1L_MUTE */
-#define WM8994_IN1L_ZC                          0x0040  /* IN1L_ZC */
-#define WM8994_IN1L_ZC_MASK                     0x0040  /* IN1L_ZC */
-#define WM8994_IN1L_ZC_SHIFT                         6  /* IN1L_ZC */
-#define WM8994_IN1L_ZC_WIDTH                         1  /* IN1L_ZC */
-#define WM8994_IN1L_VOL_MASK                    0x001F  /* IN1L_VOL - [4:0] */
-#define WM8994_IN1L_VOL_SHIFT                        0  /* IN1L_VOL - [4:0] */
-#define WM8994_IN1L_VOL_WIDTH                        5  /* IN1L_VOL - [4:0] */
-
-/*
- * R25 (0x19) - Left Line Input 3&4 Volume
- */
-#define WM8994_IN2_VU                           0x0100  /* IN2_VU */
-#define WM8994_IN2_VU_MASK                      0x0100  /* IN2_VU */
-#define WM8994_IN2_VU_SHIFT                          8  /* IN2_VU */
-#define WM8994_IN2_VU_WIDTH                          1  /* IN2_VU */
-#define WM8994_IN2L_MUTE                        0x0080  /* IN2L_MUTE */
-#define WM8994_IN2L_MUTE_MASK                   0x0080  /* IN2L_MUTE */
-#define WM8994_IN2L_MUTE_SHIFT                       7  /* IN2L_MUTE */
-#define WM8994_IN2L_MUTE_WIDTH                       1  /* IN2L_MUTE */
-#define WM8994_IN2L_ZC                          0x0040  /* IN2L_ZC */
-#define WM8994_IN2L_ZC_MASK                     0x0040  /* IN2L_ZC */
-#define WM8994_IN2L_ZC_SHIFT                         6  /* IN2L_ZC */
-#define WM8994_IN2L_ZC_WIDTH                         1  /* IN2L_ZC */
-#define WM8994_IN2L_VOL_MASK                    0x001F  /* IN2L_VOL - [4:0] */
-#define WM8994_IN2L_VOL_SHIFT                        0  /* IN2L_VOL - [4:0] */
-#define WM8994_IN2L_VOL_WIDTH                        5  /* IN2L_VOL - [4:0] */
-
-/*
- * R26 (0x1A) - Right Line Input 1&2 Volume
- */
-#define WM8994_IN1_VU                           0x0100  /* IN1_VU */
-#define WM8994_IN1_VU_MASK                      0x0100  /* IN1_VU */
-#define WM8994_IN1_VU_SHIFT                          8  /* IN1_VU */
-#define WM8994_IN1_VU_WIDTH                          1  /* IN1_VU */
-#define WM8994_IN1R_MUTE                        0x0080  /* IN1R_MUTE */
-#define WM8994_IN1R_MUTE_MASK                   0x0080  /* IN1R_MUTE */
-#define WM8994_IN1R_MUTE_SHIFT                       7  /* IN1R_MUTE */
-#define WM8994_IN1R_MUTE_WIDTH                       1  /* IN1R_MUTE */
-#define WM8994_IN1R_ZC                          0x0040  /* IN1R_ZC */
-#define WM8994_IN1R_ZC_MASK                     0x0040  /* IN1R_ZC */
-#define WM8994_IN1R_ZC_SHIFT                         6  /* IN1R_ZC */
-#define WM8994_IN1R_ZC_WIDTH                         1  /* IN1R_ZC */
-#define WM8994_IN1R_VOL_MASK                    0x001F  /* IN1R_VOL - [4:0] */
-#define WM8994_IN1R_VOL_SHIFT                        0  /* IN1R_VOL - [4:0] */
-#define WM8994_IN1R_VOL_WIDTH                        5  /* IN1R_VOL - [4:0] */
-
-/*
- * R27 (0x1B) - Right Line Input 3&4 Volume
- */
-#define WM8994_IN2_VU                           0x0100  /* IN2_VU */
-#define WM8994_IN2_VU_MASK                      0x0100  /* IN2_VU */
-#define WM8994_IN2_VU_SHIFT                          8  /* IN2_VU */
-#define WM8994_IN2_VU_WIDTH                          1  /* IN2_VU */
-#define WM8994_IN2R_MUTE                        0x0080  /* IN2R_MUTE */
-#define WM8994_IN2R_MUTE_MASK                   0x0080  /* IN2R_MUTE */
-#define WM8994_IN2R_MUTE_SHIFT                       7  /* IN2R_MUTE */
-#define WM8994_IN2R_MUTE_WIDTH                       1  /* IN2R_MUTE */
-#define WM8994_IN2R_ZC                          0x0040  /* IN2R_ZC */
-#define WM8994_IN2R_ZC_MASK                     0x0040  /* IN2R_ZC */
-#define WM8994_IN2R_ZC_SHIFT                         6  /* IN2R_ZC */
-#define WM8994_IN2R_ZC_WIDTH                         1  /* IN2R_ZC */
-#define WM8994_IN2R_VOL_MASK                    0x001F  /* IN2R_VOL - [4:0] */
-#define WM8994_IN2R_VOL_SHIFT                        0  /* IN2R_VOL - [4:0] */
-#define WM8994_IN2R_VOL_WIDTH                        5  /* IN2R_VOL - [4:0] */
-
-/*
- * R28 (0x1C) - Left Output Volume
- */
-#define WM8994_HPOUT1_VU                        0x0100  /* HPOUT1_VU */
-#define WM8994_HPOUT1_VU_MASK                   0x0100  /* HPOUT1_VU */
-#define WM8994_HPOUT1_VU_SHIFT                       8  /* HPOUT1_VU */
-#define WM8994_HPOUT1_VU_WIDTH                       1  /* HPOUT1_VU */
-#define WM8994_HPOUT1L_ZC                       0x0080  /* HPOUT1L_ZC */
-#define WM8994_HPOUT1L_ZC_MASK                  0x0080  /* HPOUT1L_ZC */
-#define WM8994_HPOUT1L_ZC_SHIFT                      7  /* HPOUT1L_ZC */
-#define WM8994_HPOUT1L_ZC_WIDTH                      1  /* HPOUT1L_ZC */
-#define WM8994_HPOUT1L_MUTE_N                   0x0040  /* HPOUT1L_MUTE_N */
-#define WM8994_HPOUT1L_MUTE_N_MASK              0x0040  /* HPOUT1L_MUTE_N */
-#define WM8994_HPOUT1L_MUTE_N_SHIFT                  6  /* HPOUT1L_MUTE_N */
-#define WM8994_HPOUT1L_MUTE_N_WIDTH                  1  /* HPOUT1L_MUTE_N */
-#define WM8994_HPOUT1L_VOL_MASK                 0x003F  /* HPOUT1L_VOL - [5:0] */
-#define WM8994_HPOUT1L_VOL_SHIFT                     0  /* HPOUT1L_VOL - [5:0] */
-#define WM8994_HPOUT1L_VOL_WIDTH                     6  /* HPOUT1L_VOL - [5:0] */
-
-/*
- * R29 (0x1D) - Right Output Volume
- */
-#define WM8994_HPOUT1_VU                        0x0100  /* HPOUT1_VU */
-#define WM8994_HPOUT1_VU_MASK                   0x0100  /* HPOUT1_VU */
-#define WM8994_HPOUT1_VU_SHIFT                       8  /* HPOUT1_VU */
-#define WM8994_HPOUT1_VU_WIDTH                       1  /* HPOUT1_VU */
-#define WM8994_HPOUT1R_ZC                       0x0080  /* HPOUT1R_ZC */
-#define WM8994_HPOUT1R_ZC_MASK                  0x0080  /* HPOUT1R_ZC */
-#define WM8994_HPOUT1R_ZC_SHIFT                      7  /* HPOUT1R_ZC */
-#define WM8994_HPOUT1R_ZC_WIDTH                      1  /* HPOUT1R_ZC */
-#define WM8994_HPOUT1R_MUTE_N                   0x0040  /* HPOUT1R_MUTE_N */
-#define WM8994_HPOUT1R_MUTE_N_MASK              0x0040  /* HPOUT1R_MUTE_N */
-#define WM8994_HPOUT1R_MUTE_N_SHIFT                  6  /* HPOUT1R_MUTE_N */
-#define WM8994_HPOUT1R_MUTE_N_WIDTH                  1  /* HPOUT1R_MUTE_N */
-#define WM8994_HPOUT1R_VOL_MASK                 0x003F  /* HPOUT1R_VOL - [5:0] */
-#define WM8994_HPOUT1R_VOL_SHIFT                     0  /* HPOUT1R_VOL - [5:0] */
-#define WM8994_HPOUT1R_VOL_WIDTH                     6  /* HPOUT1R_VOL - [5:0] */
-
-/*
- * R30 (0x1E) - Line Outputs Volume
- */
-#define WM8994_LINEOUT1N_MUTE                   0x0040  /* LINEOUT1N_MUTE */
-#define WM8994_LINEOUT1N_MUTE_MASK              0x0040  /* LINEOUT1N_MUTE */
-#define WM8994_LINEOUT1N_MUTE_SHIFT                  6  /* LINEOUT1N_MUTE */
-#define WM8994_LINEOUT1N_MUTE_WIDTH                  1  /* LINEOUT1N_MUTE */
-#define WM8994_LINEOUT1P_MUTE                   0x0020  /* LINEOUT1P_MUTE */
-#define WM8994_LINEOUT1P_MUTE_MASK              0x0020  /* LINEOUT1P_MUTE */
-#define WM8994_LINEOUT1P_MUTE_SHIFT                  5  /* LINEOUT1P_MUTE */
-#define WM8994_LINEOUT1P_MUTE_WIDTH                  1  /* LINEOUT1P_MUTE */
-#define WM8994_LINEOUT1_VOL                     0x0010  /* LINEOUT1_VOL */
-#define WM8994_LINEOUT1_VOL_MASK                0x0010  /* LINEOUT1_VOL */
-#define WM8994_LINEOUT1_VOL_SHIFT                    4  /* LINEOUT1_VOL */
-#define WM8994_LINEOUT1_VOL_WIDTH                    1  /* LINEOUT1_VOL */
-#define WM8994_LINEOUT2N_MUTE                   0x0004  /* LINEOUT2N_MUTE */
-#define WM8994_LINEOUT2N_MUTE_MASK              0x0004  /* LINEOUT2N_MUTE */
-#define WM8994_LINEOUT2N_MUTE_SHIFT                  2  /* LINEOUT2N_MUTE */
-#define WM8994_LINEOUT2N_MUTE_WIDTH                  1  /* LINEOUT2N_MUTE */
-#define WM8994_LINEOUT2P_MUTE                   0x0002  /* LINEOUT2P_MUTE */
-#define WM8994_LINEOUT2P_MUTE_MASK              0x0002  /* LINEOUT2P_MUTE */
-#define WM8994_LINEOUT2P_MUTE_SHIFT                  1  /* LINEOUT2P_MUTE */
-#define WM8994_LINEOUT2P_MUTE_WIDTH                  1  /* LINEOUT2P_MUTE */
-#define WM8994_LINEOUT2_VOL                     0x0001  /* LINEOUT2_VOL */
-#define WM8994_LINEOUT2_VOL_MASK                0x0001  /* LINEOUT2_VOL */
-#define WM8994_LINEOUT2_VOL_SHIFT                    0  /* LINEOUT2_VOL */
-#define WM8994_LINEOUT2_VOL_WIDTH                    1  /* LINEOUT2_VOL */
-
-/*
- * R31 (0x1F) - HPOUT2 Volume
- */
-#define WM8994_HPOUT2_MUTE                      0x0020  /* HPOUT2_MUTE */
-#define WM8994_HPOUT2_MUTE_MASK                 0x0020  /* HPOUT2_MUTE */
-#define WM8994_HPOUT2_MUTE_SHIFT                     5  /* HPOUT2_MUTE */
-#define WM8994_HPOUT2_MUTE_WIDTH                     1  /* HPOUT2_MUTE */
-#define WM8994_HPOUT2_VOL                       0x0010  /* HPOUT2_VOL */
-#define WM8994_HPOUT2_VOL_MASK                  0x0010  /* HPOUT2_VOL */
-#define WM8994_HPOUT2_VOL_SHIFT                      4  /* HPOUT2_VOL */
-#define WM8994_HPOUT2_VOL_WIDTH                      1  /* HPOUT2_VOL */
-
-/*
- * R32 (0x20) - Left OPGA Volume
- */
-#define WM8994_MIXOUT_VU                        0x0100  /* MIXOUT_VU */
-#define WM8994_MIXOUT_VU_MASK                   0x0100  /* MIXOUT_VU */
-#define WM8994_MIXOUT_VU_SHIFT                       8  /* MIXOUT_VU */
-#define WM8994_MIXOUT_VU_WIDTH                       1  /* MIXOUT_VU */
-#define WM8994_MIXOUTL_ZC                       0x0080  /* MIXOUTL_ZC */
-#define WM8994_MIXOUTL_ZC_MASK                  0x0080  /* MIXOUTL_ZC */
-#define WM8994_MIXOUTL_ZC_SHIFT                      7  /* MIXOUTL_ZC */
-#define WM8994_MIXOUTL_ZC_WIDTH                      1  /* MIXOUTL_ZC */
-#define WM8994_MIXOUTL_MUTE_N                   0x0040  /* MIXOUTL_MUTE_N */
-#define WM8994_MIXOUTL_MUTE_N_MASK              0x0040  /* MIXOUTL_MUTE_N */
-#define WM8994_MIXOUTL_MUTE_N_SHIFT                  6  /* MIXOUTL_MUTE_N */
-#define WM8994_MIXOUTL_MUTE_N_WIDTH                  1  /* MIXOUTL_MUTE_N */
-#define WM8994_MIXOUTL_VOL_MASK                 0x003F  /* MIXOUTL_VOL - [5:0] */
-#define WM8994_MIXOUTL_VOL_SHIFT                     0  /* MIXOUTL_VOL - [5:0] */
-#define WM8994_MIXOUTL_VOL_WIDTH                     6  /* MIXOUTL_VOL - [5:0] */
-
-/*
- * R33 (0x21) - Right OPGA Volume
- */
-#define WM8994_MIXOUT_VU                        0x0100  /* MIXOUT_VU */
-#define WM8994_MIXOUT_VU_MASK                   0x0100  /* MIXOUT_VU */
-#define WM8994_MIXOUT_VU_SHIFT                       8  /* MIXOUT_VU */
-#define WM8994_MIXOUT_VU_WIDTH                       1  /* MIXOUT_VU */
-#define WM8994_MIXOUTR_ZC                       0x0080  /* MIXOUTR_ZC */
-#define WM8994_MIXOUTR_ZC_MASK                  0x0080  /* MIXOUTR_ZC */
-#define WM8994_MIXOUTR_ZC_SHIFT                      7  /* MIXOUTR_ZC */
-#define WM8994_MIXOUTR_ZC_WIDTH                      1  /* MIXOUTR_ZC */
-#define WM8994_MIXOUTR_MUTE_N                   0x0040  /* MIXOUTR_MUTE_N */
-#define WM8994_MIXOUTR_MUTE_N_MASK              0x0040  /* MIXOUTR_MUTE_N */
-#define WM8994_MIXOUTR_MUTE_N_SHIFT                  6  /* MIXOUTR_MUTE_N */
-#define WM8994_MIXOUTR_MUTE_N_WIDTH                  1  /* MIXOUTR_MUTE_N */
-#define WM8994_MIXOUTR_VOL_MASK                 0x003F  /* MIXOUTR_VOL - [5:0] */
-#define WM8994_MIXOUTR_VOL_SHIFT                     0  /* MIXOUTR_VOL - [5:0] */
-#define WM8994_MIXOUTR_VOL_WIDTH                     6  /* MIXOUTR_VOL - [5:0] */
-
-/*
- * R34 (0x22) - SPKMIXL Attenuation
- */
-#define WM8994_DAC2L_SPKMIXL_VOL                0x0040  /* DAC2L_SPKMIXL_VOL */
-#define WM8994_DAC2L_SPKMIXL_VOL_MASK           0x0040  /* DAC2L_SPKMIXL_VOL */
-#define WM8994_DAC2L_SPKMIXL_VOL_SHIFT               6  /* DAC2L_SPKMIXL_VOL */
-#define WM8994_DAC2L_SPKMIXL_VOL_WIDTH               1  /* DAC2L_SPKMIXL_VOL */
-#define WM8994_MIXINL_SPKMIXL_VOL               0x0020  /* MIXINL_SPKMIXL_VOL */
-#define WM8994_MIXINL_SPKMIXL_VOL_MASK          0x0020  /* MIXINL_SPKMIXL_VOL */
-#define WM8994_MIXINL_SPKMIXL_VOL_SHIFT              5  /* MIXINL_SPKMIXL_VOL */
-#define WM8994_MIXINL_SPKMIXL_VOL_WIDTH              1  /* MIXINL_SPKMIXL_VOL */
-#define WM8994_IN1LP_SPKMIXL_VOL                0x0010  /* IN1LP_SPKMIXL_VOL */
-#define WM8994_IN1LP_SPKMIXL_VOL_MASK           0x0010  /* IN1LP_SPKMIXL_VOL */
-#define WM8994_IN1LP_SPKMIXL_VOL_SHIFT               4  /* IN1LP_SPKMIXL_VOL */
-#define WM8994_IN1LP_SPKMIXL_VOL_WIDTH               1  /* IN1LP_SPKMIXL_VOL */
-#define WM8994_MIXOUTL_SPKMIXL_VOL              0x0008  /* MIXOUTL_SPKMIXL_VOL */
-#define WM8994_MIXOUTL_SPKMIXL_VOL_MASK         0x0008  /* MIXOUTL_SPKMIXL_VOL */
-#define WM8994_MIXOUTL_SPKMIXL_VOL_SHIFT             3  /* MIXOUTL_SPKMIXL_VOL */
-#define WM8994_MIXOUTL_SPKMIXL_VOL_WIDTH             1  /* MIXOUTL_SPKMIXL_VOL */
-#define WM8994_DAC1L_SPKMIXL_VOL                0x0004  /* DAC1L_SPKMIXL_VOL */
-#define WM8994_DAC1L_SPKMIXL_VOL_MASK           0x0004  /* DAC1L_SPKMIXL_VOL */
-#define WM8994_DAC1L_SPKMIXL_VOL_SHIFT               2  /* DAC1L_SPKMIXL_VOL */
-#define WM8994_DAC1L_SPKMIXL_VOL_WIDTH               1  /* DAC1L_SPKMIXL_VOL */
-#define WM8994_SPKMIXL_VOL_MASK                 0x0003  /* SPKMIXL_VOL - [1:0] */
-#define WM8994_SPKMIXL_VOL_SHIFT                     0  /* SPKMIXL_VOL - [1:0] */
-#define WM8994_SPKMIXL_VOL_WIDTH                     2  /* SPKMIXL_VOL - [1:0] */
-
-/*
- * R35 (0x23) - SPKMIXR Attenuation
- */
-#define WM8994_SPKOUT_CLASSAB                   0x0100  /* SPKOUT_CLASSAB */
-#define WM8994_SPKOUT_CLASSAB_MASK              0x0100  /* SPKOUT_CLASSAB */
-#define WM8994_SPKOUT_CLASSAB_SHIFT                  8  /* SPKOUT_CLASSAB */
-#define WM8994_SPKOUT_CLASSAB_WIDTH                  1  /* SPKOUT_CLASSAB */
-#define WM8994_DAC2R_SPKMIXR_VOL                0x0040  /* DAC2R_SPKMIXR_VOL */
-#define WM8994_DAC2R_SPKMIXR_VOL_MASK           0x0040  /* DAC2R_SPKMIXR_VOL */
-#define WM8994_DAC2R_SPKMIXR_VOL_SHIFT               6  /* DAC2R_SPKMIXR_VOL */
-#define WM8994_DAC2R_SPKMIXR_VOL_WIDTH               1  /* DAC2R_SPKMIXR_VOL */
-#define WM8994_MIXINR_SPKMIXR_VOL               0x0020  /* MIXINR_SPKMIXR_VOL */
-#define WM8994_MIXINR_SPKMIXR_VOL_MASK          0x0020  /* MIXINR_SPKMIXR_VOL */
-#define WM8994_MIXINR_SPKMIXR_VOL_SHIFT              5  /* MIXINR_SPKMIXR_VOL */
-#define WM8994_MIXINR_SPKMIXR_VOL_WIDTH              1  /* MIXINR_SPKMIXR_VOL */
-#define WM8994_IN1RP_SPKMIXR_VOL                0x0010  /* IN1RP_SPKMIXR_VOL */
-#define WM8994_IN1RP_SPKMIXR_VOL_MASK           0x0010  /* IN1RP_SPKMIXR_VOL */
-#define WM8994_IN1RP_SPKMIXR_VOL_SHIFT               4  /* IN1RP_SPKMIXR_VOL */
-#define WM8994_IN1RP_SPKMIXR_VOL_WIDTH               1  /* IN1RP_SPKMIXR_VOL */
-#define WM8994_MIXOUTR_SPKMIXR_VOL              0x0008  /* MIXOUTR_SPKMIXR_VOL */
-#define WM8994_MIXOUTR_SPKMIXR_VOL_MASK         0x0008  /* MIXOUTR_SPKMIXR_VOL */
-#define WM8994_MIXOUTR_SPKMIXR_VOL_SHIFT             3  /* MIXOUTR_SPKMIXR_VOL */
-#define WM8994_MIXOUTR_SPKMIXR_VOL_WIDTH             1  /* MIXOUTR_SPKMIXR_VOL */
-#define WM8994_DAC1R_SPKMIXR_VOL                0x0004  /* DAC1R_SPKMIXR_VOL */
-#define WM8994_DAC1R_SPKMIXR_VOL_MASK           0x0004  /* DAC1R_SPKMIXR_VOL */
-#define WM8994_DAC1R_SPKMIXR_VOL_SHIFT               2  /* DAC1R_SPKMIXR_VOL */
-#define WM8994_DAC1R_SPKMIXR_VOL_WIDTH               1  /* DAC1R_SPKMIXR_VOL */
-#define WM8994_SPKMIXR_VOL_MASK                 0x0003  /* SPKMIXR_VOL - [1:0] */
-#define WM8994_SPKMIXR_VOL_SHIFT                     0  /* SPKMIXR_VOL - [1:0] */
-#define WM8994_SPKMIXR_VOL_WIDTH                     2  /* SPKMIXR_VOL - [1:0] */
-
-/*
- * R36 (0x24) - SPKOUT Mixers
- */
-#define WM8994_IN2LRP_TO_SPKOUTL                0x0020  /* IN2LRP_TO_SPKOUTL */
-#define WM8994_IN2LRP_TO_SPKOUTL_MASK           0x0020  /* IN2LRP_TO_SPKOUTL */
-#define WM8994_IN2LRP_TO_SPKOUTL_SHIFT               5  /* IN2LRP_TO_SPKOUTL */
-#define WM8994_IN2LRP_TO_SPKOUTL_WIDTH               1  /* IN2LRP_TO_SPKOUTL */
-#define WM8994_SPKMIXL_TO_SPKOUTL               0x0010  /* SPKMIXL_TO_SPKOUTL */
-#define WM8994_SPKMIXL_TO_SPKOUTL_MASK          0x0010  /* SPKMIXL_TO_SPKOUTL */
-#define WM8994_SPKMIXL_TO_SPKOUTL_SHIFT              4  /* SPKMIXL_TO_SPKOUTL */
-#define WM8994_SPKMIXL_TO_SPKOUTL_WIDTH              1  /* SPKMIXL_TO_SPKOUTL */
-#define WM8994_SPKMIXR_TO_SPKOUTL               0x0008  /* SPKMIXR_TO_SPKOUTL */
-#define WM8994_SPKMIXR_TO_SPKOUTL_MASK          0x0008  /* SPKMIXR_TO_SPKOUTL */
-#define WM8994_SPKMIXR_TO_SPKOUTL_SHIFT              3  /* SPKMIXR_TO_SPKOUTL */
-#define WM8994_SPKMIXR_TO_SPKOUTL_WIDTH              1  /* SPKMIXR_TO_SPKOUTL */
-#define WM8994_IN2LRP_TO_SPKOUTR                0x0004  /* IN2LRP_TO_SPKOUTR */
-#define WM8994_IN2LRP_TO_SPKOUTR_MASK           0x0004  /* IN2LRP_TO_SPKOUTR */
-#define WM8994_IN2LRP_TO_SPKOUTR_SHIFT               2  /* IN2LRP_TO_SPKOUTR */
-#define WM8994_IN2LRP_TO_SPKOUTR_WIDTH               1  /* IN2LRP_TO_SPKOUTR */
-#define WM8994_SPKMIXL_TO_SPKOUTR               0x0002  /* SPKMIXL_TO_SPKOUTR */
-#define WM8994_SPKMIXL_TO_SPKOUTR_MASK          0x0002  /* SPKMIXL_TO_SPKOUTR */
-#define WM8994_SPKMIXL_TO_SPKOUTR_SHIFT              1  /* SPKMIXL_TO_SPKOUTR */
-#define WM8994_SPKMIXL_TO_SPKOUTR_WIDTH              1  /* SPKMIXL_TO_SPKOUTR */
-#define WM8994_SPKMIXR_TO_SPKOUTR               0x0001  /* SPKMIXR_TO_SPKOUTR */
-#define WM8994_SPKMIXR_TO_SPKOUTR_MASK          0x0001  /* SPKMIXR_TO_SPKOUTR */
-#define WM8994_SPKMIXR_TO_SPKOUTR_SHIFT              0  /* SPKMIXR_TO_SPKOUTR */
-#define WM8994_SPKMIXR_TO_SPKOUTR_WIDTH              1  /* SPKMIXR_TO_SPKOUTR */
-
-/*
- * R37 (0x25) - ClassD
- */
-#define WM8994_SPKOUTL_BOOST_MASK               0x0038  /* SPKOUTL_BOOST - [5:3] */
-#define WM8994_SPKOUTL_BOOST_SHIFT                   3  /* SPKOUTL_BOOST - [5:3] */
-#define WM8994_SPKOUTL_BOOST_WIDTH                   3  /* SPKOUTL_BOOST - [5:3] */
-#define WM8994_SPKOUTR_BOOST_MASK               0x0007  /* SPKOUTR_BOOST - [2:0] */
-#define WM8994_SPKOUTR_BOOST_SHIFT                   0  /* SPKOUTR_BOOST - [2:0] */
-#define WM8994_SPKOUTR_BOOST_WIDTH                   3  /* SPKOUTR_BOOST - [2:0] */
-
-/*
- * R38 (0x26) - Speaker Volume Left
- */
-#define WM8994_SPKOUT_VU                        0x0100  /* SPKOUT_VU */
-#define WM8994_SPKOUT_VU_MASK                   0x0100  /* SPKOUT_VU */
-#define WM8994_SPKOUT_VU_SHIFT                       8  /* SPKOUT_VU */
-#define WM8994_SPKOUT_VU_WIDTH                       1  /* SPKOUT_VU */
-#define WM8994_SPKOUTL_ZC                       0x0080  /* SPKOUTL_ZC */
-#define WM8994_SPKOUTL_ZC_MASK                  0x0080  /* SPKOUTL_ZC */
-#define WM8994_SPKOUTL_ZC_SHIFT                      7  /* SPKOUTL_ZC */
-#define WM8994_SPKOUTL_ZC_WIDTH                      1  /* SPKOUTL_ZC */
-#define WM8994_SPKOUTL_MUTE_N                   0x0040  /* SPKOUTL_MUTE_N */
-#define WM8994_SPKOUTL_MUTE_N_MASK              0x0040  /* SPKOUTL_MUTE_N */
-#define WM8994_SPKOUTL_MUTE_N_SHIFT                  6  /* SPKOUTL_MUTE_N */
-#define WM8994_SPKOUTL_MUTE_N_WIDTH                  1  /* SPKOUTL_MUTE_N */
-#define WM8994_SPKOUTL_VOL_MASK                 0x003F  /* SPKOUTL_VOL - [5:0] */
-#define WM8994_SPKOUTL_VOL_SHIFT                     0  /* SPKOUTL_VOL - [5:0] */
-#define WM8994_SPKOUTL_VOL_WIDTH                     6  /* SPKOUTL_VOL - [5:0] */
-
-/*
- * R39 (0x27) - Speaker Volume Right
- */
-#define WM8994_SPKOUT_VU                        0x0100  /* SPKOUT_VU */
-#define WM8994_SPKOUT_VU_MASK                   0x0100  /* SPKOUT_VU */
-#define WM8994_SPKOUT_VU_SHIFT                       8  /* SPKOUT_VU */
-#define WM8994_SPKOUT_VU_WIDTH                       1  /* SPKOUT_VU */
-#define WM8994_SPKOUTR_ZC                       0x0080  /* SPKOUTR_ZC */
-#define WM8994_SPKOUTR_ZC_MASK                  0x0080  /* SPKOUTR_ZC */
-#define WM8994_SPKOUTR_ZC_SHIFT                      7  /* SPKOUTR_ZC */
-#define WM8994_SPKOUTR_ZC_WIDTH                      1  /* SPKOUTR_ZC */
-#define WM8994_SPKOUTR_MUTE_N                   0x0040  /* SPKOUTR_MUTE_N */
-#define WM8994_SPKOUTR_MUTE_N_MASK              0x0040  /* SPKOUTR_MUTE_N */
-#define WM8994_SPKOUTR_MUTE_N_SHIFT                  6  /* SPKOUTR_MUTE_N */
-#define WM8994_SPKOUTR_MUTE_N_WIDTH                  1  /* SPKOUTR_MUTE_N */
-#define WM8994_SPKOUTR_VOL_MASK                 0x003F  /* SPKOUTR_VOL - [5:0] */
-#define WM8994_SPKOUTR_VOL_SHIFT                     0  /* SPKOUTR_VOL - [5:0] */
-#define WM8994_SPKOUTR_VOL_WIDTH                     6  /* SPKOUTR_VOL - [5:0] */
-
-/*
- * R40 (0x28) - Input Mixer (2)
- */
-#define WM8994_IN2LP_TO_IN2L                    0x0080  /* IN2LP_TO_IN2L */
-#define WM8994_IN2LP_TO_IN2L_MASK               0x0080  /* IN2LP_TO_IN2L */
-#define WM8994_IN2LP_TO_IN2L_SHIFT                   7  /* IN2LP_TO_IN2L */
-#define WM8994_IN2LP_TO_IN2L_WIDTH                   1  /* IN2LP_TO_IN2L */
-#define WM8994_IN2LN_TO_IN2L                    0x0040  /* IN2LN_TO_IN2L */
-#define WM8994_IN2LN_TO_IN2L_MASK               0x0040  /* IN2LN_TO_IN2L */
-#define WM8994_IN2LN_TO_IN2L_SHIFT                   6  /* IN2LN_TO_IN2L */
-#define WM8994_IN2LN_TO_IN2L_WIDTH                   1  /* IN2LN_TO_IN2L */
-#define WM8994_IN1LP_TO_IN1L                    0x0020  /* IN1LP_TO_IN1L */
-#define WM8994_IN1LP_TO_IN1L_MASK               0x0020  /* IN1LP_TO_IN1L */
-#define WM8994_IN1LP_TO_IN1L_SHIFT                   5  /* IN1LP_TO_IN1L */
-#define WM8994_IN1LP_TO_IN1L_WIDTH                   1  /* IN1LP_TO_IN1L */
-#define WM8994_IN1LN_TO_IN1L                    0x0010  /* IN1LN_TO_IN1L */
-#define WM8994_IN1LN_TO_IN1L_MASK               0x0010  /* IN1LN_TO_IN1L */
-#define WM8994_IN1LN_TO_IN1L_SHIFT                   4  /* IN1LN_TO_IN1L */
-#define WM8994_IN1LN_TO_IN1L_WIDTH                   1  /* IN1LN_TO_IN1L */
-#define WM8994_IN2RP_TO_IN2R                    0x0008  /* IN2RP_TO_IN2R */
-#define WM8994_IN2RP_TO_IN2R_MASK               0x0008  /* IN2RP_TO_IN2R */
-#define WM8994_IN2RP_TO_IN2R_SHIFT                   3  /* IN2RP_TO_IN2R */
-#define WM8994_IN2RP_TO_IN2R_WIDTH                   1  /* IN2RP_TO_IN2R */
-#define WM8994_IN2RN_TO_IN2R                    0x0004  /* IN2RN_TO_IN2R */
-#define WM8994_IN2RN_TO_IN2R_MASK               0x0004  /* IN2RN_TO_IN2R */
-#define WM8994_IN2RN_TO_IN2R_SHIFT                   2  /* IN2RN_TO_IN2R */
-#define WM8994_IN2RN_TO_IN2R_WIDTH                   1  /* IN2RN_TO_IN2R */
-#define WM8994_IN1RP_TO_IN1R                    0x0002  /* IN1RP_TO_IN1R */
-#define WM8994_IN1RP_TO_IN1R_MASK               0x0002  /* IN1RP_TO_IN1R */
-#define WM8994_IN1RP_TO_IN1R_SHIFT                   1  /* IN1RP_TO_IN1R */
-#define WM8994_IN1RP_TO_IN1R_WIDTH                   1  /* IN1RP_TO_IN1R */
-#define WM8994_IN1RN_TO_IN1R                    0x0001  /* IN1RN_TO_IN1R */
-#define WM8994_IN1RN_TO_IN1R_MASK               0x0001  /* IN1RN_TO_IN1R */
-#define WM8994_IN1RN_TO_IN1R_SHIFT                   0  /* IN1RN_TO_IN1R */
-#define WM8994_IN1RN_TO_IN1R_WIDTH                   1  /* IN1RN_TO_IN1R */
-
-/*
- * R41 (0x29) - Input Mixer (3)
- */
-#define WM8994_IN2L_TO_MIXINL                   0x0100  /* IN2L_TO_MIXINL */
-#define WM8994_IN2L_TO_MIXINL_MASK              0x0100  /* IN2L_TO_MIXINL */
-#define WM8994_IN2L_TO_MIXINL_SHIFT                  8  /* IN2L_TO_MIXINL */
-#define WM8994_IN2L_TO_MIXINL_WIDTH                  1  /* IN2L_TO_MIXINL */
-#define WM8994_IN2L_MIXINL_VOL                  0x0080  /* IN2L_MIXINL_VOL */
-#define WM8994_IN2L_MIXINL_VOL_MASK             0x0080  /* IN2L_MIXINL_VOL */
-#define WM8994_IN2L_MIXINL_VOL_SHIFT                 7  /* IN2L_MIXINL_VOL */
-#define WM8994_IN2L_MIXINL_VOL_WIDTH                 1  /* IN2L_MIXINL_VOL */
-#define WM8994_IN1L_TO_MIXINL                   0x0020  /* IN1L_TO_MIXINL */
-#define WM8994_IN1L_TO_MIXINL_MASK              0x0020  /* IN1L_TO_MIXINL */
-#define WM8994_IN1L_TO_MIXINL_SHIFT                  5  /* IN1L_TO_MIXINL */
-#define WM8994_IN1L_TO_MIXINL_WIDTH                  1  /* IN1L_TO_MIXINL */
-#define WM8994_IN1L_MIXINL_VOL                  0x0010  /* IN1L_MIXINL_VOL */
-#define WM8994_IN1L_MIXINL_VOL_MASK             0x0010  /* IN1L_MIXINL_VOL */
-#define WM8994_IN1L_MIXINL_VOL_SHIFT                 4  /* IN1L_MIXINL_VOL */
-#define WM8994_IN1L_MIXINL_VOL_WIDTH                 1  /* IN1L_MIXINL_VOL */
-#define WM8994_MIXOUTL_MIXINL_VOL_MASK          0x0007  /* MIXOUTL_MIXINL_VOL - [2:0] */
-#define WM8994_MIXOUTL_MIXINL_VOL_SHIFT              0  /* MIXOUTL_MIXINL_VOL - [2:0] */
-#define WM8994_MIXOUTL_MIXINL_VOL_WIDTH              3  /* MIXOUTL_MIXINL_VOL - [2:0] */
-
-/*
- * R42 (0x2A) - Input Mixer (4)
- */
-#define WM8994_IN2R_TO_MIXINR                   0x0100  /* IN2R_TO_MIXINR */
-#define WM8994_IN2R_TO_MIXINR_MASK              0x0100  /* IN2R_TO_MIXINR */
-#define WM8994_IN2R_TO_MIXINR_SHIFT                  8  /* IN2R_TO_MIXINR */
-#define WM8994_IN2R_TO_MIXINR_WIDTH                  1  /* IN2R_TO_MIXINR */
-#define WM8994_IN2R_MIXINR_VOL                  0x0080  /* IN2R_MIXINR_VOL */
-#define WM8994_IN2R_MIXINR_VOL_MASK             0x0080  /* IN2R_MIXINR_VOL */
-#define WM8994_IN2R_MIXINR_VOL_SHIFT                 7  /* IN2R_MIXINR_VOL */
-#define WM8994_IN2R_MIXINR_VOL_WIDTH                 1  /* IN2R_MIXINR_VOL */
-#define WM8994_IN1R_TO_MIXINR                   0x0020  /* IN1R_TO_MIXINR */
-#define WM8994_IN1R_TO_MIXINR_MASK              0x0020  /* IN1R_TO_MIXINR */
-#define WM8994_IN1R_TO_MIXINR_SHIFT                  5  /* IN1R_TO_MIXINR */
-#define WM8994_IN1R_TO_MIXINR_WIDTH                  1  /* IN1R_TO_MIXINR */
-#define WM8994_IN1R_MIXINR_VOL                  0x0010  /* IN1R_MIXINR_VOL */
-#define WM8994_IN1R_MIXINR_VOL_MASK             0x0010  /* IN1R_MIXINR_VOL */
-#define WM8994_IN1R_MIXINR_VOL_SHIFT                 4  /* IN1R_MIXINR_VOL */
-#define WM8994_IN1R_MIXINR_VOL_WIDTH                 1  /* IN1R_MIXINR_VOL */
-#define WM8994_MIXOUTR_MIXINR_VOL_MASK          0x0007  /* MIXOUTR_MIXINR_VOL - [2:0] */
-#define WM8994_MIXOUTR_MIXINR_VOL_SHIFT              0  /* MIXOUTR_MIXINR_VOL - [2:0] */
-#define WM8994_MIXOUTR_MIXINR_VOL_WIDTH              3  /* MIXOUTR_MIXINR_VOL - [2:0] */
-
-/*
- * R43 (0x2B) - Input Mixer (5)
- */
-#define WM8994_IN1LP_MIXINL_VOL_MASK            0x01C0  /* IN1LP_MIXINL_VOL - [8:6] */
-#define WM8994_IN1LP_MIXINL_VOL_SHIFT                6  /* IN1LP_MIXINL_VOL - [8:6] */
-#define WM8994_IN1LP_MIXINL_VOL_WIDTH                3  /* IN1LP_MIXINL_VOL - [8:6] */
-#define WM8994_IN2LRP_MIXINL_VOL_MASK           0x0007  /* IN2LRP_MIXINL_VOL - [2:0] */
-#define WM8994_IN2LRP_MIXINL_VOL_SHIFT               0  /* IN2LRP_MIXINL_VOL - [2:0] */
-#define WM8994_IN2LRP_MIXINL_VOL_WIDTH               3  /* IN2LRP_MIXINL_VOL - [2:0] */
-
-/*
- * R44 (0x2C) - Input Mixer (6)
- */
-#define WM8994_IN1RP_MIXINR_VOL_MASK            0x01C0  /* IN1RP_MIXINR_VOL - [8:6] */
-#define WM8994_IN1RP_MIXINR_VOL_SHIFT                6  /* IN1RP_MIXINR_VOL - [8:6] */
-#define WM8994_IN1RP_MIXINR_VOL_WIDTH                3  /* IN1RP_MIXINR_VOL - [8:6] */
-#define WM8994_IN2LRP_MIXINR_VOL_MASK           0x0007  /* IN2LRP_MIXINR_VOL - [2:0] */
-#define WM8994_IN2LRP_MIXINR_VOL_SHIFT               0  /* IN2LRP_MIXINR_VOL - [2:0] */
-#define WM8994_IN2LRP_MIXINR_VOL_WIDTH               3  /* IN2LRP_MIXINR_VOL - [2:0] */
-
-/*
- * R45 (0x2D) - Output Mixer (1)
- */
-#define WM8994_DAC1L_TO_HPOUT1L                 0x0100  /* DAC1L_TO_HPOUT1L */
-#define WM8994_DAC1L_TO_HPOUT1L_MASK            0x0100  /* DAC1L_TO_HPOUT1L */
-#define WM8994_DAC1L_TO_HPOUT1L_SHIFT                8  /* DAC1L_TO_HPOUT1L */
-#define WM8994_DAC1L_TO_HPOUT1L_WIDTH                1  /* DAC1L_TO_HPOUT1L */
-#define WM8994_MIXINR_TO_MIXOUTL                0x0080  /* MIXINR_TO_MIXOUTL */
-#define WM8994_MIXINR_TO_MIXOUTL_MASK           0x0080  /* MIXINR_TO_MIXOUTL */
-#define WM8994_MIXINR_TO_MIXOUTL_SHIFT               7  /* MIXINR_TO_MIXOUTL */
-#define WM8994_MIXINR_TO_MIXOUTL_WIDTH               1  /* MIXINR_TO_MIXOUTL */
-#define WM8994_MIXINL_TO_MIXOUTL                0x0040  /* MIXINL_TO_MIXOUTL */
-#define WM8994_MIXINL_TO_MIXOUTL_MASK           0x0040  /* MIXINL_TO_MIXOUTL */
-#define WM8994_MIXINL_TO_MIXOUTL_SHIFT               6  /* MIXINL_TO_MIXOUTL */
-#define WM8994_MIXINL_TO_MIXOUTL_WIDTH               1  /* MIXINL_TO_MIXOUTL */
-#define WM8994_IN2RN_TO_MIXOUTL                 0x0020  /* IN2RN_TO_MIXOUTL */
-#define WM8994_IN2RN_TO_MIXOUTL_MASK            0x0020  /* IN2RN_TO_MIXOUTL */
-#define WM8994_IN2RN_TO_MIXOUTL_SHIFT                5  /* IN2RN_TO_MIXOUTL */
-#define WM8994_IN2RN_TO_MIXOUTL_WIDTH                1  /* IN2RN_TO_MIXOUTL */
-#define WM8994_IN2LN_TO_MIXOUTL                 0x0010  /* IN2LN_TO_MIXOUTL */
-#define WM8994_IN2LN_TO_MIXOUTL_MASK            0x0010  /* IN2LN_TO_MIXOUTL */
-#define WM8994_IN2LN_TO_MIXOUTL_SHIFT                4  /* IN2LN_TO_MIXOUTL */
-#define WM8994_IN2LN_TO_MIXOUTL_WIDTH                1  /* IN2LN_TO_MIXOUTL */
-#define WM8994_IN1R_TO_MIXOUTL                  0x0008  /* IN1R_TO_MIXOUTL */
-#define WM8994_IN1R_TO_MIXOUTL_MASK             0x0008  /* IN1R_TO_MIXOUTL */
-#define WM8994_IN1R_TO_MIXOUTL_SHIFT                 3  /* IN1R_TO_MIXOUTL */
-#define WM8994_IN1R_TO_MIXOUTL_WIDTH                 1  /* IN1R_TO_MIXOUTL */
-#define WM8994_IN1L_TO_MIXOUTL                  0x0004  /* IN1L_TO_MIXOUTL */
-#define WM8994_IN1L_TO_MIXOUTL_MASK             0x0004  /* IN1L_TO_MIXOUTL */
-#define WM8994_IN1L_TO_MIXOUTL_SHIFT                 2  /* IN1L_TO_MIXOUTL */
-#define WM8994_IN1L_TO_MIXOUTL_WIDTH                 1  /* IN1L_TO_MIXOUTL */
-#define WM8994_IN2LP_TO_MIXOUTL                 0x0002  /* IN2LP_TO_MIXOUTL */
-#define WM8994_IN2LP_TO_MIXOUTL_MASK            0x0002  /* IN2LP_TO_MIXOUTL */
-#define WM8994_IN2LP_TO_MIXOUTL_SHIFT                1  /* IN2LP_TO_MIXOUTL */
-#define WM8994_IN2LP_TO_MIXOUTL_WIDTH                1  /* IN2LP_TO_MIXOUTL */
-#define WM8994_DAC1L_TO_MIXOUTL                 0x0001  /* DAC1L_TO_MIXOUTL */
-#define WM8994_DAC1L_TO_MIXOUTL_MASK            0x0001  /* DAC1L_TO_MIXOUTL */
-#define WM8994_DAC1L_TO_MIXOUTL_SHIFT                0  /* DAC1L_TO_MIXOUTL */
-#define WM8994_DAC1L_TO_MIXOUTL_WIDTH                1  /* DAC1L_TO_MIXOUTL */
-
-/*
- * R46 (0x2E) - Output Mixer (2)
- */
-#define WM8994_DAC1R_TO_HPOUT1R                 0x0100  /* DAC1R_TO_HPOUT1R */
-#define WM8994_DAC1R_TO_HPOUT1R_MASK            0x0100  /* DAC1R_TO_HPOUT1R */
-#define WM8994_DAC1R_TO_HPOUT1R_SHIFT                8  /* DAC1R_TO_HPOUT1R */
-#define WM8994_DAC1R_TO_HPOUT1R_WIDTH                1  /* DAC1R_TO_HPOUT1R */
-#define WM8994_MIXINL_TO_MIXOUTR                0x0080  /* MIXINL_TO_MIXOUTR */
-#define WM8994_MIXINL_TO_MIXOUTR_MASK           0x0080  /* MIXINL_TO_MIXOUTR */
-#define WM8994_MIXINL_TO_MIXOUTR_SHIFT               7  /* MIXINL_TO_MIXOUTR */
-#define WM8994_MIXINL_TO_MIXOUTR_WIDTH               1  /* MIXINL_TO_MIXOUTR */
-#define WM8994_MIXINR_TO_MIXOUTR                0x0040  /* MIXINR_TO_MIXOUTR */
-#define WM8994_MIXINR_TO_MIXOUTR_MASK           0x0040  /* MIXINR_TO_MIXOUTR */
-#define WM8994_MIXINR_TO_MIXOUTR_SHIFT               6  /* MIXINR_TO_MIXOUTR */
-#define WM8994_MIXINR_TO_MIXOUTR_WIDTH               1  /* MIXINR_TO_MIXOUTR */
-#define WM8994_IN2LN_TO_MIXOUTR                 0x0020  /* IN2LN_TO_MIXOUTR */
-#define WM8994_IN2LN_TO_MIXOUTR_MASK            0x0020  /* IN2LN_TO_MIXOUTR */
-#define WM8994_IN2LN_TO_MIXOUTR_SHIFT                5  /* IN2LN_TO_MIXOUTR */
-#define WM8994_IN2LN_TO_MIXOUTR_WIDTH                1  /* IN2LN_TO_MIXOUTR */
-#define WM8994_IN2RN_TO_MIXOUTR                 0x0010  /* IN2RN_TO_MIXOUTR */
-#define WM8994_IN2RN_TO_MIXOUTR_MASK            0x0010  /* IN2RN_TO_MIXOUTR */
-#define WM8994_IN2RN_TO_MIXOUTR_SHIFT                4  /* IN2RN_TO_MIXOUTR */
-#define WM8994_IN2RN_TO_MIXOUTR_WIDTH                1  /* IN2RN_TO_MIXOUTR */
-#define WM8994_IN1L_TO_MIXOUTR                  0x0008  /* IN1L_TO_MIXOUTR */
-#define WM8994_IN1L_TO_MIXOUTR_MASK             0x0008  /* IN1L_TO_MIXOUTR */
-#define WM8994_IN1L_TO_MIXOUTR_SHIFT                 3  /* IN1L_TO_MIXOUTR */
-#define WM8994_IN1L_TO_MIXOUTR_WIDTH                 1  /* IN1L_TO_MIXOUTR */
-#define WM8994_IN1R_TO_MIXOUTR                  0x0004  /* IN1R_TO_MIXOUTR */
-#define WM8994_IN1R_TO_MIXOUTR_MASK             0x0004  /* IN1R_TO_MIXOUTR */
-#define WM8994_IN1R_TO_MIXOUTR_SHIFT                 2  /* IN1R_TO_MIXOUTR */
-#define WM8994_IN1R_TO_MIXOUTR_WIDTH                 1  /* IN1R_TO_MIXOUTR */
-#define WM8994_IN2RP_TO_MIXOUTR                 0x0002  /* IN2RP_TO_MIXOUTR */
-#define WM8994_IN2RP_TO_MIXOUTR_MASK            0x0002  /* IN2RP_TO_MIXOUTR */
-#define WM8994_IN2RP_TO_MIXOUTR_SHIFT                1  /* IN2RP_TO_MIXOUTR */
-#define WM8994_IN2RP_TO_MIXOUTR_WIDTH                1  /* IN2RP_TO_MIXOUTR */
-#define WM8994_DAC1R_TO_MIXOUTR                 0x0001  /* DAC1R_TO_MIXOUTR */
-#define WM8994_DAC1R_TO_MIXOUTR_MASK            0x0001  /* DAC1R_TO_MIXOUTR */
-#define WM8994_DAC1R_TO_MIXOUTR_SHIFT                0  /* DAC1R_TO_MIXOUTR */
-#define WM8994_DAC1R_TO_MIXOUTR_WIDTH                1  /* DAC1R_TO_MIXOUTR */
-
-/*
- * R47 (0x2F) - Output Mixer (3)
- */
-#define WM8994_IN2LP_MIXOUTL_VOL_MASK           0x0E00  /* IN2LP_MIXOUTL_VOL - [11:9] */
-#define WM8994_IN2LP_MIXOUTL_VOL_SHIFT               9  /* IN2LP_MIXOUTL_VOL - [11:9] */
-#define WM8994_IN2LP_MIXOUTL_VOL_WIDTH               3  /* IN2LP_MIXOUTL_VOL - [11:9] */
-#define WM8994_IN2LN_MIXOUTL_VOL_MASK           0x01C0  /* IN2LN_MIXOUTL_VOL - [8:6] */
-#define WM8994_IN2LN_MIXOUTL_VOL_SHIFT               6  /* IN2LN_MIXOUTL_VOL - [8:6] */
-#define WM8994_IN2LN_MIXOUTL_VOL_WIDTH               3  /* IN2LN_MIXOUTL_VOL - [8:6] */
-#define WM8994_IN1R_MIXOUTL_VOL_MASK            0x0038  /* IN1R_MIXOUTL_VOL - [5:3] */
-#define WM8994_IN1R_MIXOUTL_VOL_SHIFT                3  /* IN1R_MIXOUTL_VOL - [5:3] */
-#define WM8994_IN1R_MIXOUTL_VOL_WIDTH                3  /* IN1R_MIXOUTL_VOL - [5:3] */
-#define WM8994_IN1L_MIXOUTL_VOL_MASK            0x0007  /* IN1L_MIXOUTL_VOL - [2:0] */
-#define WM8994_IN1L_MIXOUTL_VOL_SHIFT                0  /* IN1L_MIXOUTL_VOL - [2:0] */
-#define WM8994_IN1L_MIXOUTL_VOL_WIDTH                3  /* IN1L_MIXOUTL_VOL - [2:0] */
-
-/*
- * R48 (0x30) - Output Mixer (4)
- */
-#define WM8994_IN2RP_MIXOUTR_VOL_MASK           0x0E00  /* IN2RP_MIXOUTR_VOL - [11:9] */
-#define WM8994_IN2RP_MIXOUTR_VOL_SHIFT               9  /* IN2RP_MIXOUTR_VOL - [11:9] */
-#define WM8994_IN2RP_MIXOUTR_VOL_WIDTH               3  /* IN2RP_MIXOUTR_VOL - [11:9] */
-#define WM8994_IN2RN_MIXOUTR_VOL_MASK           0x01C0  /* IN2RN_MIXOUTR_VOL - [8:6] */
-#define WM8994_IN2RN_MIXOUTR_VOL_SHIFT               6  /* IN2RN_MIXOUTR_VOL - [8:6] */
-#define WM8994_IN2RN_MIXOUTR_VOL_WIDTH               3  /* IN2RN_MIXOUTR_VOL - [8:6] */
-#define WM8994_IN1L_MIXOUTR_VOL_MASK            0x0038  /* IN1L_MIXOUTR_VOL - [5:3] */
-#define WM8994_IN1L_MIXOUTR_VOL_SHIFT                3  /* IN1L_MIXOUTR_VOL - [5:3] */
-#define WM8994_IN1L_MIXOUTR_VOL_WIDTH                3  /* IN1L_MIXOUTR_VOL - [5:3] */
-#define WM8994_IN1R_MIXOUTR_VOL_MASK            0x0007  /* IN1R_MIXOUTR_VOL - [2:0] */
-#define WM8994_IN1R_MIXOUTR_VOL_SHIFT                0  /* IN1R_MIXOUTR_VOL - [2:0] */
-#define WM8994_IN1R_MIXOUTR_VOL_WIDTH                3  /* IN1R_MIXOUTR_VOL - [2:0] */
-
-/*
- * R49 (0x31) - Output Mixer (5)
- */
-#define WM8994_DAC1L_MIXOUTL_VOL_MASK           0x0E00  /* DAC1L_MIXOUTL_VOL - [11:9] */
-#define WM8994_DAC1L_MIXOUTL_VOL_SHIFT               9  /* DAC1L_MIXOUTL_VOL - [11:9] */
-#define WM8994_DAC1L_MIXOUTL_VOL_WIDTH               3  /* DAC1L_MIXOUTL_VOL - [11:9] */
-#define WM8994_IN2RN_MIXOUTL_VOL_MASK           0x01C0  /* IN2RN_MIXOUTL_VOL - [8:6] */
-#define WM8994_IN2RN_MIXOUTL_VOL_SHIFT               6  /* IN2RN_MIXOUTL_VOL - [8:6] */
-#define WM8994_IN2RN_MIXOUTL_VOL_WIDTH               3  /* IN2RN_MIXOUTL_VOL - [8:6] */
-#define WM8994_MIXINR_MIXOUTL_VOL_MASK          0x0038  /* MIXINR_MIXOUTL_VOL - [5:3] */
-#define WM8994_MIXINR_MIXOUTL_VOL_SHIFT              3  /* MIXINR_MIXOUTL_VOL - [5:3] */
-#define WM8994_MIXINR_MIXOUTL_VOL_WIDTH              3  /* MIXINR_MIXOUTL_VOL - [5:3] */
-#define WM8994_MIXINL_MIXOUTL_VOL_MASK          0x0007  /* MIXINL_MIXOUTL_VOL - [2:0] */
-#define WM8994_MIXINL_MIXOUTL_VOL_SHIFT              0  /* MIXINL_MIXOUTL_VOL - [2:0] */
-#define WM8994_MIXINL_MIXOUTL_VOL_WIDTH              3  /* MIXINL_MIXOUTL_VOL - [2:0] */
-
-/*
- * R50 (0x32) - Output Mixer (6)
- */
-#define WM8994_DAC1R_MIXOUTR_VOL_MASK           0x0E00  /* DAC1R_MIXOUTR_VOL - [11:9] */
-#define WM8994_DAC1R_MIXOUTR_VOL_SHIFT               9  /* DAC1R_MIXOUTR_VOL - [11:9] */
-#define WM8994_DAC1R_MIXOUTR_VOL_WIDTH               3  /* DAC1R_MIXOUTR_VOL - [11:9] */
-#define WM8994_IN2LN_MIXOUTR_VOL_MASK           0x01C0  /* IN2LN_MIXOUTR_VOL - [8:6] */
-#define WM8994_IN2LN_MIXOUTR_VOL_SHIFT               6  /* IN2LN_MIXOUTR_VOL - [8:6] */
-#define WM8994_IN2LN_MIXOUTR_VOL_WIDTH               3  /* IN2LN_MIXOUTR_VOL - [8:6] */
-#define WM8994_MIXINL_MIXOUTR_VOL_MASK          0x0038  /* MIXINL_MIXOUTR_VOL - [5:3] */
-#define WM8994_MIXINL_MIXOUTR_VOL_SHIFT              3  /* MIXINL_MIXOUTR_VOL - [5:3] */
-#define WM8994_MIXINL_MIXOUTR_VOL_WIDTH              3  /* MIXINL_MIXOUTR_VOL - [5:3] */
-#define WM8994_MIXINR_MIXOUTR_VOL_MASK          0x0007  /* MIXINR_MIXOUTR_VOL - [2:0] */
-#define WM8994_MIXINR_MIXOUTR_VOL_SHIFT              0  /* MIXINR_MIXOUTR_VOL - [2:0] */
-#define WM8994_MIXINR_MIXOUTR_VOL_WIDTH              3  /* MIXINR_MIXOUTR_VOL - [2:0] */
-
-/*
- * R51 (0x33) - HPOUT2 Mixer
- */
-#define WM8994_IN2LRP_TO_HPOUT2                 0x0020  /* IN2LRP_TO_HPOUT2 */
-#define WM8994_IN2LRP_TO_HPOUT2_MASK            0x0020  /* IN2LRP_TO_HPOUT2 */
-#define WM8994_IN2LRP_TO_HPOUT2_SHIFT                5  /* IN2LRP_TO_HPOUT2 */
-#define WM8994_IN2LRP_TO_HPOUT2_WIDTH                1  /* IN2LRP_TO_HPOUT2 */
-#define WM8994_MIXOUTLVOL_TO_HPOUT2             0x0010  /* MIXOUTLVOL_TO_HPOUT2 */
-#define WM8994_MIXOUTLVOL_TO_HPOUT2_MASK        0x0010  /* MIXOUTLVOL_TO_HPOUT2 */
-#define WM8994_MIXOUTLVOL_TO_HPOUT2_SHIFT            4  /* MIXOUTLVOL_TO_HPOUT2 */
-#define WM8994_MIXOUTLVOL_TO_HPOUT2_WIDTH            1  /* MIXOUTLVOL_TO_HPOUT2 */
-#define WM8994_MIXOUTRVOL_TO_HPOUT2             0x0008  /* MIXOUTRVOL_TO_HPOUT2 */
-#define WM8994_MIXOUTRVOL_TO_HPOUT2_MASK        0x0008  /* MIXOUTRVOL_TO_HPOUT2 */
-#define WM8994_MIXOUTRVOL_TO_HPOUT2_SHIFT            3  /* MIXOUTRVOL_TO_HPOUT2 */
-#define WM8994_MIXOUTRVOL_TO_HPOUT2_WIDTH            1  /* MIXOUTRVOL_TO_HPOUT2 */
-
-/*
- * R52 (0x34) - Line Mixer (1)
- */
-#define WM8994_MIXOUTL_TO_LINEOUT1N             0x0040  /* MIXOUTL_TO_LINEOUT1N */
-#define WM8994_MIXOUTL_TO_LINEOUT1N_MASK        0x0040  /* MIXOUTL_TO_LINEOUT1N */
-#define WM8994_MIXOUTL_TO_LINEOUT1N_SHIFT            6  /* MIXOUTL_TO_LINEOUT1N */
-#define WM8994_MIXOUTL_TO_LINEOUT1N_WIDTH            1  /* MIXOUTL_TO_LINEOUT1N */
-#define WM8994_MIXOUTR_TO_LINEOUT1N             0x0020  /* MIXOUTR_TO_LINEOUT1N */
-#define WM8994_MIXOUTR_TO_LINEOUT1N_MASK        0x0020  /* MIXOUTR_TO_LINEOUT1N */
-#define WM8994_MIXOUTR_TO_LINEOUT1N_SHIFT            5  /* MIXOUTR_TO_LINEOUT1N */
-#define WM8994_MIXOUTR_TO_LINEOUT1N_WIDTH            1  /* MIXOUTR_TO_LINEOUT1N */
-#define WM8994_LINEOUT1_MODE                    0x0010  /* LINEOUT1_MODE */
-#define WM8994_LINEOUT1_MODE_MASK               0x0010  /* LINEOUT1_MODE */
-#define WM8994_LINEOUT1_MODE_SHIFT                   4  /* LINEOUT1_MODE */
-#define WM8994_LINEOUT1_MODE_WIDTH                   1  /* LINEOUT1_MODE */
-#define WM8994_IN1R_TO_LINEOUT1P                0x0004  /* IN1R_TO_LINEOUT1P */
-#define WM8994_IN1R_TO_LINEOUT1P_MASK           0x0004  /* IN1R_TO_LINEOUT1P */
-#define WM8994_IN1R_TO_LINEOUT1P_SHIFT               2  /* IN1R_TO_LINEOUT1P */
-#define WM8994_IN1R_TO_LINEOUT1P_WIDTH               1  /* IN1R_TO_LINEOUT1P */
-#define WM8994_IN1L_TO_LINEOUT1P                0x0002  /* IN1L_TO_LINEOUT1P */
-#define WM8994_IN1L_TO_LINEOUT1P_MASK           0x0002  /* IN1L_TO_LINEOUT1P */
-#define WM8994_IN1L_TO_LINEOUT1P_SHIFT               1  /* IN1L_TO_LINEOUT1P */
-#define WM8994_IN1L_TO_LINEOUT1P_WIDTH               1  /* IN1L_TO_LINEOUT1P */
-#define WM8994_MIXOUTL_TO_LINEOUT1P             0x0001  /* MIXOUTL_TO_LINEOUT1P */
-#define WM8994_MIXOUTL_TO_LINEOUT1P_MASK        0x0001  /* MIXOUTL_TO_LINEOUT1P */
-#define WM8994_MIXOUTL_TO_LINEOUT1P_SHIFT            0  /* MIXOUTL_TO_LINEOUT1P */
-#define WM8994_MIXOUTL_TO_LINEOUT1P_WIDTH            1  /* MIXOUTL_TO_LINEOUT1P */
-
-/*
- * R53 (0x35) - Line Mixer (2)
- */
-#define WM8994_MIXOUTR_TO_LINEOUT2N             0x0040  /* MIXOUTR_TO_LINEOUT2N */
-#define WM8994_MIXOUTR_TO_LINEOUT2N_MASK        0x0040  /* MIXOUTR_TO_LINEOUT2N */
-#define WM8994_MIXOUTR_TO_LINEOUT2N_SHIFT            6  /* MIXOUTR_TO_LINEOUT2N */
-#define WM8994_MIXOUTR_TO_LINEOUT2N_WIDTH            1  /* MIXOUTR_TO_LINEOUT2N */
-#define WM8994_MIXOUTL_TO_LINEOUT2N             0x0020  /* MIXOUTL_TO_LINEOUT2N */
-#define WM8994_MIXOUTL_TO_LINEOUT2N_MASK        0x0020  /* MIXOUTL_TO_LINEOUT2N */
-#define WM8994_MIXOUTL_TO_LINEOUT2N_SHIFT            5  /* MIXOUTL_TO_LINEOUT2N */
-#define WM8994_MIXOUTL_TO_LINEOUT2N_WIDTH            1  /* MIXOUTL_TO_LINEOUT2N */
-#define WM8994_LINEOUT2_MODE                    0x0010  /* LINEOUT2_MODE */
-#define WM8994_LINEOUT2_MODE_MASK               0x0010  /* LINEOUT2_MODE */
-#define WM8994_LINEOUT2_MODE_SHIFT                   4  /* LINEOUT2_MODE */
-#define WM8994_LINEOUT2_MODE_WIDTH                   1  /* LINEOUT2_MODE */
-#define WM8994_IN1L_TO_LINEOUT2P                0x0004  /* IN1L_TO_LINEOUT2P */
-#define WM8994_IN1L_TO_LINEOUT2P_MASK           0x0004  /* IN1L_TO_LINEOUT2P */
-#define WM8994_IN1L_TO_LINEOUT2P_SHIFT               2  /* IN1L_TO_LINEOUT2P */
-#define WM8994_IN1L_TO_LINEOUT2P_WIDTH               1  /* IN1L_TO_LINEOUT2P */
-#define WM8994_IN1R_TO_LINEOUT2P                0x0002  /* IN1R_TO_LINEOUT2P */
-#define WM8994_IN1R_TO_LINEOUT2P_MASK           0x0002  /* IN1R_TO_LINEOUT2P */
-#define WM8994_IN1R_TO_LINEOUT2P_SHIFT               1  /* IN1R_TO_LINEOUT2P */
-#define WM8994_IN1R_TO_LINEOUT2P_WIDTH               1  /* IN1R_TO_LINEOUT2P */
-#define WM8994_MIXOUTR_TO_LINEOUT2P             0x0001  /* MIXOUTR_TO_LINEOUT2P */
-#define WM8994_MIXOUTR_TO_LINEOUT2P_MASK        0x0001  /* MIXOUTR_TO_LINEOUT2P */
-#define WM8994_MIXOUTR_TO_LINEOUT2P_SHIFT            0  /* MIXOUTR_TO_LINEOUT2P */
-#define WM8994_MIXOUTR_TO_LINEOUT2P_WIDTH            1  /* MIXOUTR_TO_LINEOUT2P */
-
-/*
- * R54 (0x36) - Speaker Mixer
- */
-#define WM8994_DAC2L_TO_SPKMIXL                 0x0200  /* DAC2L_TO_SPKMIXL */
-#define WM8994_DAC2L_TO_SPKMIXL_MASK            0x0200  /* DAC2L_TO_SPKMIXL */
-#define WM8994_DAC2L_TO_SPKMIXL_SHIFT                9  /* DAC2L_TO_SPKMIXL */
-#define WM8994_DAC2L_TO_SPKMIXL_WIDTH                1  /* DAC2L_TO_SPKMIXL */
-#define WM8994_DAC2R_TO_SPKMIXR                 0x0100  /* DAC2R_TO_SPKMIXR */
-#define WM8994_DAC2R_TO_SPKMIXR_MASK            0x0100  /* DAC2R_TO_SPKMIXR */
-#define WM8994_DAC2R_TO_SPKMIXR_SHIFT                8  /* DAC2R_TO_SPKMIXR */
-#define WM8994_DAC2R_TO_SPKMIXR_WIDTH                1  /* DAC2R_TO_SPKMIXR */
-#define WM8994_MIXINL_TO_SPKMIXL                0x0080  /* MIXINL_TO_SPKMIXL */
-#define WM8994_MIXINL_TO_SPKMIXL_MASK           0x0080  /* MIXINL_TO_SPKMIXL */
-#define WM8994_MIXINL_TO_SPKMIXL_SHIFT               7  /* MIXINL_TO_SPKMIXL */
-#define WM8994_MIXINL_TO_SPKMIXL_WIDTH               1  /* MIXINL_TO_SPKMIXL */
-#define WM8994_MIXINR_TO_SPKMIXR                0x0040  /* MIXINR_TO_SPKMIXR */
-#define WM8994_MIXINR_TO_SPKMIXR_MASK           0x0040  /* MIXINR_TO_SPKMIXR */
-#define WM8994_MIXINR_TO_SPKMIXR_SHIFT               6  /* MIXINR_TO_SPKMIXR */
-#define WM8994_MIXINR_TO_SPKMIXR_WIDTH               1  /* MIXINR_TO_SPKMIXR */
-#define WM8994_IN1LP_TO_SPKMIXL                 0x0020  /* IN1LP_TO_SPKMIXL */
-#define WM8994_IN1LP_TO_SPKMIXL_MASK            0x0020  /* IN1LP_TO_SPKMIXL */
-#define WM8994_IN1LP_TO_SPKMIXL_SHIFT                5  /* IN1LP_TO_SPKMIXL */
-#define WM8994_IN1LP_TO_SPKMIXL_WIDTH                1  /* IN1LP_TO_SPKMIXL */
-#define WM8994_IN1RP_TO_SPKMIXR                 0x0010  /* IN1RP_TO_SPKMIXR */
-#define WM8994_IN1RP_TO_SPKMIXR_MASK            0x0010  /* IN1RP_TO_SPKMIXR */
-#define WM8994_IN1RP_TO_SPKMIXR_SHIFT                4  /* IN1RP_TO_SPKMIXR */
-#define WM8994_IN1RP_TO_SPKMIXR_WIDTH                1  /* IN1RP_TO_SPKMIXR */
-#define WM8994_MIXOUTL_TO_SPKMIXL               0x0008  /* MIXOUTL_TO_SPKMIXL */
-#define WM8994_MIXOUTL_TO_SPKMIXL_MASK          0x0008  /* MIXOUTL_TO_SPKMIXL */
-#define WM8994_MIXOUTL_TO_SPKMIXL_SHIFT              3  /* MIXOUTL_TO_SPKMIXL */
-#define WM8994_MIXOUTL_TO_SPKMIXL_WIDTH              1  /* MIXOUTL_TO_SPKMIXL */
-#define WM8994_MIXOUTR_TO_SPKMIXR               0x0004  /* MIXOUTR_TO_SPKMIXR */
-#define WM8994_MIXOUTR_TO_SPKMIXR_MASK          0x0004  /* MIXOUTR_TO_SPKMIXR */
-#define WM8994_MIXOUTR_TO_SPKMIXR_SHIFT              2  /* MIXOUTR_TO_SPKMIXR */
-#define WM8994_MIXOUTR_TO_SPKMIXR_WIDTH              1  /* MIXOUTR_TO_SPKMIXR */
-#define WM8994_DAC1L_TO_SPKMIXL                 0x0002  /* DAC1L_TO_SPKMIXL */
-#define WM8994_DAC1L_TO_SPKMIXL_MASK            0x0002  /* DAC1L_TO_SPKMIXL */
-#define WM8994_DAC1L_TO_SPKMIXL_SHIFT                1  /* DAC1L_TO_SPKMIXL */
-#define WM8994_DAC1L_TO_SPKMIXL_WIDTH                1  /* DAC1L_TO_SPKMIXL */
-#define WM8994_DAC1R_TO_SPKMIXR                 0x0001  /* DAC1R_TO_SPKMIXR */
-#define WM8994_DAC1R_TO_SPKMIXR_MASK            0x0001  /* DAC1R_TO_SPKMIXR */
-#define WM8994_DAC1R_TO_SPKMIXR_SHIFT                0  /* DAC1R_TO_SPKMIXR */
-#define WM8994_DAC1R_TO_SPKMIXR_WIDTH                1  /* DAC1R_TO_SPKMIXR */
-
-/*
- * R55 (0x37) - Additional Control
- */
-#define WM8994_LINEOUT1_FB                      0x0080  /* LINEOUT1_FB */
-#define WM8994_LINEOUT1_FB_MASK                 0x0080  /* LINEOUT1_FB */
-#define WM8994_LINEOUT1_FB_SHIFT                     7  /* LINEOUT1_FB */
-#define WM8994_LINEOUT1_FB_WIDTH                     1  /* LINEOUT1_FB */
-#define WM8994_LINEOUT2_FB                      0x0040  /* LINEOUT2_FB */
-#define WM8994_LINEOUT2_FB_MASK                 0x0040  /* LINEOUT2_FB */
-#define WM8994_LINEOUT2_FB_SHIFT                     6  /* LINEOUT2_FB */
-#define WM8994_LINEOUT2_FB_WIDTH                     1  /* LINEOUT2_FB */
-#define WM8994_VROI                             0x0001  /* VROI */
-#define WM8994_VROI_MASK                        0x0001  /* VROI */
-#define WM8994_VROI_SHIFT                            0  /* VROI */
-#define WM8994_VROI_WIDTH                            1  /* VROI */
-
-/*
- * R56 (0x38) - AntiPOP (1)
- */
-#define WM8994_LINEOUT_VMID_BUF_ENA             0x0080  /* LINEOUT_VMID_BUF_ENA */
-#define WM8994_LINEOUT_VMID_BUF_ENA_MASK        0x0080  /* LINEOUT_VMID_BUF_ENA */
-#define WM8994_LINEOUT_VMID_BUF_ENA_SHIFT            7  /* LINEOUT_VMID_BUF_ENA */
-#define WM8994_LINEOUT_VMID_BUF_ENA_WIDTH            1  /* LINEOUT_VMID_BUF_ENA */
-#define WM8994_HPOUT2_IN_ENA                    0x0040  /* HPOUT2_IN_ENA */
-#define WM8994_HPOUT2_IN_ENA_MASK               0x0040  /* HPOUT2_IN_ENA */
-#define WM8994_HPOUT2_IN_ENA_SHIFT                   6  /* HPOUT2_IN_ENA */
-#define WM8994_HPOUT2_IN_ENA_WIDTH                   1  /* HPOUT2_IN_ENA */
-#define WM8994_LINEOUT1_DISCH                   0x0020  /* LINEOUT1_DISCH */
-#define WM8994_LINEOUT1_DISCH_MASK              0x0020  /* LINEOUT1_DISCH */
-#define WM8994_LINEOUT1_DISCH_SHIFT                  5  /* LINEOUT1_DISCH */
-#define WM8994_LINEOUT1_DISCH_WIDTH                  1  /* LINEOUT1_DISCH */
-#define WM8994_LINEOUT2_DISCH                   0x0010  /* LINEOUT2_DISCH */
-#define WM8994_LINEOUT2_DISCH_MASK              0x0010  /* LINEOUT2_DISCH */
-#define WM8994_LINEOUT2_DISCH_SHIFT                  4  /* LINEOUT2_DISCH */
-#define WM8994_LINEOUT2_DISCH_WIDTH                  1  /* LINEOUT2_DISCH */
-
-/*
- * R57 (0x39) - AntiPOP (2)
- */
-#define WM1811_JACKDET_MODE_MASK                0x0180  /* JACKDET_MODE - [8:7] */
-#define WM1811_JACKDET_MODE_SHIFT                    7  /* JACKDET_MODE - [8:7] */
-#define WM1811_JACKDET_MODE_WIDTH                    2  /* JACKDET_MODE - [8:7] */
-#define WM8994_MICB2_DISCH                      0x0100  /* MICB2_DISCH */
-#define WM8994_MICB2_DISCH_MASK                 0x0100  /* MICB2_DISCH */
-#define WM8994_MICB2_DISCH_SHIFT                     8  /* MICB2_DISCH */
-#define WM8994_MICB2_DISCH_WIDTH                     1  /* MICB2_DISCH */
-#define WM8994_MICB1_DISCH                      0x0080  /* MICB1_DISCH */
-#define WM8994_MICB1_DISCH_MASK                 0x0080  /* MICB1_DISCH */
-#define WM8994_MICB1_DISCH_SHIFT                     7  /* MICB1_DISCH */
-#define WM8994_MICB1_DISCH_WIDTH                     1  /* MICB1_DISCH */
-#define WM8994_VMID_RAMP_MASK                   0x0060  /* VMID_RAMP - [6:5] */
-#define WM8994_VMID_RAMP_SHIFT                       5  /* VMID_RAMP - [6:5] */
-#define WM8994_VMID_RAMP_WIDTH                       2  /* VMID_RAMP - [6:5] */
-#define WM8994_VMID_BUF_ENA                     0x0008  /* VMID_BUF_ENA */
-#define WM8994_VMID_BUF_ENA_MASK                0x0008  /* VMID_BUF_ENA */
-#define WM8994_VMID_BUF_ENA_SHIFT                    3  /* VMID_BUF_ENA */
-#define WM8994_VMID_BUF_ENA_WIDTH                    1  /* VMID_BUF_ENA */
-#define WM8994_STARTUP_BIAS_ENA                 0x0004  /* STARTUP_BIAS_ENA */
-#define WM8994_STARTUP_BIAS_ENA_MASK            0x0004  /* STARTUP_BIAS_ENA */
-#define WM8994_STARTUP_BIAS_ENA_SHIFT                2  /* STARTUP_BIAS_ENA */
-#define WM8994_STARTUP_BIAS_ENA_WIDTH                1  /* STARTUP_BIAS_ENA */
-#define WM8994_BIAS_SRC                         0x0002  /* BIAS_SRC */
-#define WM8994_BIAS_SRC_MASK                    0x0002  /* BIAS_SRC */
-#define WM8994_BIAS_SRC_SHIFT                        1  /* BIAS_SRC */
-#define WM8994_BIAS_SRC_WIDTH                        1  /* BIAS_SRC */
-#define WM8994_VMID_DISCH                       0x0001  /* VMID_DISCH */
-#define WM8994_VMID_DISCH_MASK                  0x0001  /* VMID_DISCH */
-#define WM8994_VMID_DISCH_SHIFT                      0  /* VMID_DISCH */
-#define WM8994_VMID_DISCH_WIDTH                      1  /* VMID_DISCH */
-
-/*
- * R58 (0x3A) - MICBIAS
- */
-#define WM8994_MICD_SCTHR_MASK                  0x00C0  /* MICD_SCTHR - [7:6] */
-#define WM8994_MICD_SCTHR_SHIFT                      6  /* MICD_SCTHR - [7:6] */
-#define WM8994_MICD_SCTHR_WIDTH                      2  /* MICD_SCTHR - [7:6] */
-#define WM8994_MICD_THR_MASK                    0x0038  /* MICD_THR - [5:3] */
-#define WM8994_MICD_THR_SHIFT                        3  /* MICD_THR - [5:3] */
-#define WM8994_MICD_THR_WIDTH                        3  /* MICD_THR - [5:3] */
-#define WM8994_MICD_ENA                         0x0004  /* MICD_ENA */
-#define WM8994_MICD_ENA_MASK                    0x0004  /* MICD_ENA */
-#define WM8994_MICD_ENA_SHIFT                        2  /* MICD_ENA */
-#define WM8994_MICD_ENA_WIDTH                        1  /* MICD_ENA */
-#define WM8994_MICB2_LVL                        0x0002  /* MICB2_LVL */
-#define WM8994_MICB2_LVL_MASK                   0x0002  /* MICB2_LVL */
-#define WM8994_MICB2_LVL_SHIFT                       1  /* MICB2_LVL */
-#define WM8994_MICB2_LVL_WIDTH                       1  /* MICB2_LVL */
-#define WM8994_MICB1_LVL                        0x0001  /* MICB1_LVL */
-#define WM8994_MICB1_LVL_MASK                   0x0001  /* MICB1_LVL */
-#define WM8994_MICB1_LVL_SHIFT                       0  /* MICB1_LVL */
-#define WM8994_MICB1_LVL_WIDTH                       1  /* MICB1_LVL */
-
-/*
- * R59 (0x3B) - LDO 1
- */
-#define WM8994_LDO1_VSEL_MASK                   0x000E  /* LDO1_VSEL - [3:1] */
-#define WM8994_LDO1_VSEL_SHIFT                       1  /* LDO1_VSEL - [3:1] */
-#define WM8994_LDO1_VSEL_WIDTH                       3  /* LDO1_VSEL - [3:1] */
-#define WM8994_LDO1_DISCH                       0x0001  /* LDO1_DISCH */
-#define WM8994_LDO1_DISCH_MASK                  0x0001  /* LDO1_DISCH */
-#define WM8994_LDO1_DISCH_SHIFT                      0  /* LDO1_DISCH */
-#define WM8994_LDO1_DISCH_WIDTH                      1  /* LDO1_DISCH */
-
-/*
- * R60 (0x3C) - LDO 2
- */
-#define WM8994_LDO2_VSEL_MASK                   0x0006  /* LDO2_VSEL - [2:1] */
-#define WM8994_LDO2_VSEL_SHIFT                       1  /* LDO2_VSEL - [2:1] */
-#define WM8994_LDO2_VSEL_WIDTH                       2  /* LDO2_VSEL - [2:1] */
-#define WM8994_LDO2_DISCH                       0x0001  /* LDO2_DISCH */
-#define WM8994_LDO2_DISCH_MASK                  0x0001  /* LDO2_DISCH */
-#define WM8994_LDO2_DISCH_SHIFT                      0  /* LDO2_DISCH */
-#define WM8994_LDO2_DISCH_WIDTH                      1  /* LDO2_DISCH */
-
-/*
- * R61 (0x3D) - MICBIAS1
- */
-#define WM8958_MICB1_RATE                       0x0020  /* MICB1_RATE */
-#define WM8958_MICB1_RATE_MASK                  0x0020  /* MICB1_RATE */
-#define WM8958_MICB1_RATE_SHIFT                      5  /* MICB1_RATE */
-#define WM8958_MICB1_RATE_WIDTH                      1  /* MICB1_RATE */
-#define WM8958_MICB1_MODE                       0x0010  /* MICB1_MODE */
-#define WM8958_MICB1_MODE_MASK                  0x0010  /* MICB1_MODE */
-#define WM8958_MICB1_MODE_SHIFT                      4  /* MICB1_MODE */
-#define WM8958_MICB1_MODE_WIDTH                      1  /* MICB1_MODE */
-#define WM8958_MICB1_LVL_MASK                   0x000E  /* MICB1_LVL - [3:1] */
-#define WM8958_MICB1_LVL_SHIFT                       1  /* MICB1_LVL - [3:1] */
-#define WM8958_MICB1_LVL_WIDTH                       3  /* MICB1_LVL - [3:1] */
-#define WM8958_MICB1_DISCH                      0x0001  /* MICB1_DISCH */
-#define WM8958_MICB1_DISCH_MASK                 0x0001  /* MICB1_DISCH */
-#define WM8958_MICB1_DISCH_SHIFT                     0  /* MICB1_DISCH */
-#define WM8958_MICB1_DISCH_WIDTH                     1  /* MICB1_DISCH */
-
-/*
- * R62 (0x3E) - MICBIAS2
- */
-#define WM8958_MICB2_RATE                       0x0020  /* MICB2_RATE */
-#define WM8958_MICB2_RATE_MASK                  0x0020  /* MICB2_RATE */
-#define WM8958_MICB2_RATE_SHIFT                      5  /* MICB2_RATE */
-#define WM8958_MICB2_RATE_WIDTH                      1  /* MICB2_RATE */
-#define WM8958_MICB2_MODE                       0x0010  /* MICB2_MODE */
-#define WM8958_MICB2_MODE_MASK                  0x0010  /* MICB2_MODE */
-#define WM8958_MICB2_MODE_SHIFT                      4  /* MICB2_MODE */
-#define WM8958_MICB2_MODE_WIDTH                      1  /* MICB2_MODE */
-#define WM8958_MICB2_LVL_MASK                   0x000E  /* MICB2_LVL - [3:1] */
-#define WM8958_MICB2_LVL_SHIFT                       1  /* MICB2_LVL - [3:1] */
-#define WM8958_MICB2_LVL_WIDTH                       3  /* MICB2_LVL - [3:1] */
-#define WM8958_MICB2_DISCH                      0x0001  /* MICB2_DISCH */
-#define WM8958_MICB2_DISCH_MASK                 0x0001  /* MICB2_DISCH */
-#define WM8958_MICB2_DISCH_SHIFT                     0  /* MICB2_DISCH */
-#define WM8958_MICB2_DISCH_WIDTH                     1  /* MICB2_DISCH */
-
-/*
- * R210 (0xD2) - Mic Detect 3
- */
-#define WM8958_MICD_LVL_MASK                    0x07FC  /* MICD_LVL - [10:2] */
-#define WM8958_MICD_LVL_SHIFT                        2  /* MICD_LVL - [10:2] */
-#define WM8958_MICD_LVL_WIDTH                        9  /* MICD_LVL - [10:2] */
-#define WM8958_MICD_VALID                       0x0002  /* MICD_VALID */
-#define WM8958_MICD_VALID_MASK                  0x0002  /* MICD_VALID */
-#define WM8958_MICD_VALID_SHIFT                      1  /* MICD_VALID */
-#define WM8958_MICD_VALID_WIDTH                      1  /* MICD_VALID */
-#define WM8958_MICD_STS                         0x0001  /* MICD_STS */
-#define WM8958_MICD_STS_MASK                    0x0001  /* MICD_STS */
-#define WM8958_MICD_STS_SHIFT                        0  /* MICD_STS */
-#define WM8958_MICD_STS_WIDTH                        1  /* MICD_STS */
-
-/*
- * R76 (0x4C) - Charge Pump (1)
- */
-#define WM8994_CP_ENA                           0x8000  /* CP_ENA */
-#define WM8994_CP_ENA_MASK                      0x8000  /* CP_ENA */
-#define WM8994_CP_ENA_SHIFT                         15  /* CP_ENA */
-#define WM8994_CP_ENA_WIDTH                          1  /* CP_ENA */
-
-/*
- * R77 (0x4D) - Charge Pump (2)
- */
-#define WM8958_CP_DISCH                         0x8000  /* CP_DISCH */
-#define WM8958_CP_DISCH_MASK                    0x8000  /* CP_DISCH */
-#define WM8958_CP_DISCH_SHIFT                       15  /* CP_DISCH */
-#define WM8958_CP_DISCH_WIDTH                        1  /* CP_DISCH */
-
-/*
- * R81 (0x51) - Class W (1)
- */
-#define WM8994_CP_DYN_SRC_SEL_MASK              0x0300  /* CP_DYN_SRC_SEL - [9:8] */
-#define WM8994_CP_DYN_SRC_SEL_SHIFT                  8  /* CP_DYN_SRC_SEL - [9:8] */
-#define WM8994_CP_DYN_SRC_SEL_WIDTH                  2  /* CP_DYN_SRC_SEL - [9:8] */
-#define WM8994_CP_DYN_PWR                       0x0001  /* CP_DYN_PWR */
-#define WM8994_CP_DYN_PWR_MASK                  0x0001  /* CP_DYN_PWR */
-#define WM8994_CP_DYN_PWR_SHIFT                      0  /* CP_DYN_PWR */
-#define WM8994_CP_DYN_PWR_WIDTH                      1  /* CP_DYN_PWR */
-
-/*
- * R84 (0x54) - DC Servo (1)
- */
-#define WM8994_DCS_TRIG_SINGLE_1                0x2000  /* DCS_TRIG_SINGLE_1 */
-#define WM8994_DCS_TRIG_SINGLE_1_MASK           0x2000  /* DCS_TRIG_SINGLE_1 */
-#define WM8994_DCS_TRIG_SINGLE_1_SHIFT              13  /* DCS_TRIG_SINGLE_1 */
-#define WM8994_DCS_TRIG_SINGLE_1_WIDTH               1  /* DCS_TRIG_SINGLE_1 */
-#define WM8994_DCS_TRIG_SINGLE_0                0x1000  /* DCS_TRIG_SINGLE_0 */
-#define WM8994_DCS_TRIG_SINGLE_0_MASK           0x1000  /* DCS_TRIG_SINGLE_0 */
-#define WM8994_DCS_TRIG_SINGLE_0_SHIFT              12  /* DCS_TRIG_SINGLE_0 */
-#define WM8994_DCS_TRIG_SINGLE_0_WIDTH               1  /* DCS_TRIG_SINGLE_0 */
-#define WM8994_DCS_TRIG_SERIES_1                0x0200  /* DCS_TRIG_SERIES_1 */
-#define WM8994_DCS_TRIG_SERIES_1_MASK           0x0200  /* DCS_TRIG_SERIES_1 */
-#define WM8994_DCS_TRIG_SERIES_1_SHIFT               9  /* DCS_TRIG_SERIES_1 */
-#define WM8994_DCS_TRIG_SERIES_1_WIDTH               1  /* DCS_TRIG_SERIES_1 */
-#define WM8994_DCS_TRIG_SERIES_0                0x0100  /* DCS_TRIG_SERIES_0 */
-#define WM8994_DCS_TRIG_SERIES_0_MASK           0x0100  /* DCS_TRIG_SERIES_0 */
-#define WM8994_DCS_TRIG_SERIES_0_SHIFT               8  /* DCS_TRIG_SERIES_0 */
-#define WM8994_DCS_TRIG_SERIES_0_WIDTH               1  /* DCS_TRIG_SERIES_0 */
-#define WM8994_DCS_TRIG_STARTUP_1               0x0020  /* DCS_TRIG_STARTUP_1 */
-#define WM8994_DCS_TRIG_STARTUP_1_MASK          0x0020  /* DCS_TRIG_STARTUP_1 */
-#define WM8994_DCS_TRIG_STARTUP_1_SHIFT              5  /* DCS_TRIG_STARTUP_1 */
-#define WM8994_DCS_TRIG_STARTUP_1_WIDTH              1  /* DCS_TRIG_STARTUP_1 */
-#define WM8994_DCS_TRIG_STARTUP_0               0x0010  /* DCS_TRIG_STARTUP_0 */
-#define WM8994_DCS_TRIG_STARTUP_0_MASK          0x0010  /* DCS_TRIG_STARTUP_0 */
-#define WM8994_DCS_TRIG_STARTUP_0_SHIFT              4  /* DCS_TRIG_STARTUP_0 */
-#define WM8994_DCS_TRIG_STARTUP_0_WIDTH              1  /* DCS_TRIG_STARTUP_0 */
-#define WM8994_DCS_TRIG_DAC_WR_1                0x0008  /* DCS_TRIG_DAC_WR_1 */
-#define WM8994_DCS_TRIG_DAC_WR_1_MASK           0x0008  /* DCS_TRIG_DAC_WR_1 */
-#define WM8994_DCS_TRIG_DAC_WR_1_SHIFT               3  /* DCS_TRIG_DAC_WR_1 */
-#define WM8994_DCS_TRIG_DAC_WR_1_WIDTH               1  /* DCS_TRIG_DAC_WR_1 */
-#define WM8994_DCS_TRIG_DAC_WR_0                0x0004  /* DCS_TRIG_DAC_WR_0 */
-#define WM8994_DCS_TRIG_DAC_WR_0_MASK           0x0004  /* DCS_TRIG_DAC_WR_0 */
-#define WM8994_DCS_TRIG_DAC_WR_0_SHIFT               2  /* DCS_TRIG_DAC_WR_0 */
-#define WM8994_DCS_TRIG_DAC_WR_0_WIDTH               1  /* DCS_TRIG_DAC_WR_0 */
-#define WM8994_DCS_ENA_CHAN_1                   0x0002  /* DCS_ENA_CHAN_1 */
-#define WM8994_DCS_ENA_CHAN_1_MASK              0x0002  /* DCS_ENA_CHAN_1 */
-#define WM8994_DCS_ENA_CHAN_1_SHIFT                  1  /* DCS_ENA_CHAN_1 */
-#define WM8994_DCS_ENA_CHAN_1_WIDTH                  1  /* DCS_ENA_CHAN_1 */
-#define WM8994_DCS_ENA_CHAN_0                   0x0001  /* DCS_ENA_CHAN_0 */
-#define WM8994_DCS_ENA_CHAN_0_MASK              0x0001  /* DCS_ENA_CHAN_0 */
-#define WM8994_DCS_ENA_CHAN_0_SHIFT                  0  /* DCS_ENA_CHAN_0 */
-#define WM8994_DCS_ENA_CHAN_0_WIDTH                  1  /* DCS_ENA_CHAN_0 */
-
-/*
- * R85 (0x55) - DC Servo (2)
- */
-#define WM8994_DCS_SERIES_NO_01_MASK            0x0FE0  /* DCS_SERIES_NO_01 - [11:5] */
-#define WM8994_DCS_SERIES_NO_01_SHIFT                5  /* DCS_SERIES_NO_01 - [11:5] */
-#define WM8994_DCS_SERIES_NO_01_WIDTH                7  /* DCS_SERIES_NO_01 - [11:5] */
-#define WM8994_DCS_TIMER_PERIOD_01_MASK         0x000F  /* DCS_TIMER_PERIOD_01 - [3:0] */
-#define WM8994_DCS_TIMER_PERIOD_01_SHIFT             0  /* DCS_TIMER_PERIOD_01 - [3:0] */
-#define WM8994_DCS_TIMER_PERIOD_01_WIDTH             4  /* DCS_TIMER_PERIOD_01 - [3:0] */
-
-/*
- * R87 (0x57) - DC Servo (4)
- */
-#define WM8994_DCS_DAC_WR_VAL_1_MASK            0xFF00  /* DCS_DAC_WR_VAL_1 - [15:8] */
-#define WM8994_DCS_DAC_WR_VAL_1_SHIFT                8  /* DCS_DAC_WR_VAL_1 - [15:8] */
-#define WM8994_DCS_DAC_WR_VAL_1_WIDTH                8  /* DCS_DAC_WR_VAL_1 - [15:8] */
-#define WM8994_DCS_DAC_WR_VAL_0_MASK            0x00FF  /* DCS_DAC_WR_VAL_0 - [7:0] */
-#define WM8994_DCS_DAC_WR_VAL_0_SHIFT                0  /* DCS_DAC_WR_VAL_0 - [7:0] */
-#define WM8994_DCS_DAC_WR_VAL_0_WIDTH                8  /* DCS_DAC_WR_VAL_0 - [7:0] */
-
-/*
- * R88 (0x58) - DC Servo Readback
- */
-#define WM8994_DCS_CAL_COMPLETE_MASK            0x0300  /* DCS_CAL_COMPLETE - [9:8] */
-#define WM8994_DCS_CAL_COMPLETE_SHIFT                8  /* DCS_CAL_COMPLETE - [9:8] */
-#define WM8994_DCS_CAL_COMPLETE_WIDTH                2  /* DCS_CAL_COMPLETE - [9:8] */
-#define WM8994_DCS_DAC_WR_COMPLETE_MASK         0x0030  /* DCS_DAC_WR_COMPLETE - [5:4] */
-#define WM8994_DCS_DAC_WR_COMPLETE_SHIFT             4  /* DCS_DAC_WR_COMPLETE - [5:4] */
-#define WM8994_DCS_DAC_WR_COMPLETE_WIDTH             2  /* DCS_DAC_WR_COMPLETE - [5:4] */
-#define WM8994_DCS_STARTUP_COMPLETE_MASK        0x0003  /* DCS_STARTUP_COMPLETE - [1:0] */
-#define WM8994_DCS_STARTUP_COMPLETE_SHIFT            0  /* DCS_STARTUP_COMPLETE - [1:0] */
-#define WM8994_DCS_STARTUP_COMPLETE_WIDTH            2  /* DCS_STARTUP_COMPLETE - [1:0] */
-
-/*
- * R96 (0x60) - Analogue HP (1)
- */
-#define WM1811_HPOUT1_ATTN                      0x0100  /* HPOUT1_ATTN */
-#define WM1811_HPOUT1_ATTN_MASK                 0x0100  /* HPOUT1_ATTN */
-#define WM1811_HPOUT1_ATTN_SHIFT                     8  /* HPOUT1_ATTN */
-#define WM1811_HPOUT1_ATTN_WIDTH                     1  /* HPOUT1_ATTN */
-#define WM8994_HPOUT1L_RMV_SHORT                0x0080  /* HPOUT1L_RMV_SHORT */
-#define WM8994_HPOUT1L_RMV_SHORT_MASK           0x0080  /* HPOUT1L_RMV_SHORT */
-#define WM8994_HPOUT1L_RMV_SHORT_SHIFT               7  /* HPOUT1L_RMV_SHORT */
-#define WM8994_HPOUT1L_RMV_SHORT_WIDTH               1  /* HPOUT1L_RMV_SHORT */
-#define WM8994_HPOUT1L_OUTP                     0x0040  /* HPOUT1L_OUTP */
-#define WM8994_HPOUT1L_OUTP_MASK                0x0040  /* HPOUT1L_OUTP */
-#define WM8994_HPOUT1L_OUTP_SHIFT                    6  /* HPOUT1L_OUTP */
-#define WM8994_HPOUT1L_OUTP_WIDTH                    1  /* HPOUT1L_OUTP */
-#define WM8994_HPOUT1L_DLY                      0x0020  /* HPOUT1L_DLY */
-#define WM8994_HPOUT1L_DLY_MASK                 0x0020  /* HPOUT1L_DLY */
-#define WM8994_HPOUT1L_DLY_SHIFT                     5  /* HPOUT1L_DLY */
-#define WM8994_HPOUT1L_DLY_WIDTH                     1  /* HPOUT1L_DLY */
-#define WM8994_HPOUT1R_RMV_SHORT                0x0008  /* HPOUT1R_RMV_SHORT */
-#define WM8994_HPOUT1R_RMV_SHORT_MASK           0x0008  /* HPOUT1R_RMV_SHORT */
-#define WM8994_HPOUT1R_RMV_SHORT_SHIFT               3  /* HPOUT1R_RMV_SHORT */
-#define WM8994_HPOUT1R_RMV_SHORT_WIDTH               1  /* HPOUT1R_RMV_SHORT */
-#define WM8994_HPOUT1R_OUTP                     0x0004  /* HPOUT1R_OUTP */
-#define WM8994_HPOUT1R_OUTP_MASK                0x0004  /* HPOUT1R_OUTP */
-#define WM8994_HPOUT1R_OUTP_SHIFT                    2  /* HPOUT1R_OUTP */
-#define WM8994_HPOUT1R_OUTP_WIDTH                    1  /* HPOUT1R_OUTP */
-#define WM8994_HPOUT1R_DLY                      0x0002  /* HPOUT1R_DLY */
-#define WM8994_HPOUT1R_DLY_MASK                 0x0002  /* HPOUT1R_DLY */
-#define WM8994_HPOUT1R_DLY_SHIFT                     1  /* HPOUT1R_DLY */
-#define WM8994_HPOUT1R_DLY_WIDTH                     1  /* HPOUT1R_DLY */
-
-/*
- * R208 (0xD0) - Mic Detect 1
- */
-#define WM8958_MICD_BIAS_STARTTIME_MASK         0xF000  /* MICD_BIAS_STARTTIME - [15:12] */
-#define WM8958_MICD_BIAS_STARTTIME_SHIFT            12  /* MICD_BIAS_STARTTIME - [15:12] */
-#define WM8958_MICD_BIAS_STARTTIME_WIDTH             4  /* MICD_BIAS_STARTTIME - [15:12] */
-#define WM8958_MICD_RATE_MASK                   0x0F00  /* MICD_RATE - [11:8] */
-#define WM8958_MICD_RATE_SHIFT                       8  /* MICD_RATE - [11:8] */
-#define WM8958_MICD_RATE_WIDTH                       4  /* MICD_RATE - [11:8] */
-#define WM8958_MICD_DBTIME                      0x0002  /* MICD_DBTIME */
-#define WM8958_MICD_DBTIME_MASK                 0x0002  /* MICD_DBTIME */
-#define WM8958_MICD_DBTIME_SHIFT                     1  /* MICD_DBTIME */
-#define WM8958_MICD_DBTIME_WIDTH                     1  /* MICD_DBTIME */
-#define WM8958_MICD_ENA                         0x0001  /* MICD_ENA */
-#define WM8958_MICD_ENA_MASK                    0x0001  /* MICD_ENA */
-#define WM8958_MICD_ENA_SHIFT                        0  /* MICD_ENA */
-#define WM8958_MICD_ENA_WIDTH                        1  /* MICD_ENA */
-
-/*
- * R209 (0xD1) - Mic Detect 2
- */
-#define WM8958_MICD_LVL_SEL_MASK                0x00FF  /* MICD_LVL_SEL - [7:0] */
-#define WM8958_MICD_LVL_SEL_SHIFT                    0  /* MICD_LVL_SEL - [7:0] */
-#define WM8958_MICD_LVL_SEL_WIDTH                    8  /* MICD_LVL_SEL - [7:0] */
-
-/*
- * R210 (0xD2) - Mic Detect 3
- */
-#define WM8958_MICD_LVL_MASK                    0x07FC  /* MICD_LVL - [10:2] */
-#define WM8958_MICD_LVL_SHIFT                        2  /* MICD_LVL - [10:2] */
-#define WM8958_MICD_LVL_WIDTH                        9  /* MICD_LVL - [10:2] */
-#define WM8958_MICD_VALID                       0x0002  /* MICD_VALID */
-#define WM8958_MICD_VALID_MASK                  0x0002  /* MICD_VALID */
-#define WM8958_MICD_VALID_SHIFT                      1  /* MICD_VALID */
-#define WM8958_MICD_VALID_WIDTH                      1  /* MICD_VALID */
-#define WM8958_MICD_STS                         0x0001  /* MICD_STS */
-#define WM8958_MICD_STS_MASK                    0x0001  /* MICD_STS */
-#define WM8958_MICD_STS_SHIFT                        0  /* MICD_STS */
-#define WM8958_MICD_STS_WIDTH                        1  /* MICD_STS */
-
-/*
- * R256 (0x100) - Chip Revision
- */
-#define WM8994_CHIP_REV_MASK                    0x000F  /* CHIP_REV - [3:0] */
-#define WM8994_CHIP_REV_SHIFT                        0  /* CHIP_REV - [3:0] */
-#define WM8994_CHIP_REV_WIDTH                        4  /* CHIP_REV - [3:0] */
-
-/*
- * R257 (0x101) - Control Interface
- */
-#define WM8994_SPI_CONTRD                       0x0040  /* SPI_CONTRD */
-#define WM8994_SPI_CONTRD_MASK                  0x0040  /* SPI_CONTRD */
-#define WM8994_SPI_CONTRD_SHIFT                      6  /* SPI_CONTRD */
-#define WM8994_SPI_CONTRD_WIDTH                      1  /* SPI_CONTRD */
-#define WM8994_SPI_4WIRE                        0x0020  /* SPI_4WIRE */
-#define WM8994_SPI_4WIRE_MASK                   0x0020  /* SPI_4WIRE */
-#define WM8994_SPI_4WIRE_SHIFT                       5  /* SPI_4WIRE */
-#define WM8994_SPI_4WIRE_WIDTH                       1  /* SPI_4WIRE */
-#define WM8994_SPI_CFG                          0x0010  /* SPI_CFG */
-#define WM8994_SPI_CFG_MASK                     0x0010  /* SPI_CFG */
-#define WM8994_SPI_CFG_SHIFT                         4  /* SPI_CFG */
-#define WM8994_SPI_CFG_WIDTH                         1  /* SPI_CFG */
-#define WM8994_AUTO_INC                         0x0004  /* AUTO_INC */
-#define WM8994_AUTO_INC_MASK                    0x0004  /* AUTO_INC */
-#define WM8994_AUTO_INC_SHIFT                        2  /* AUTO_INC */
-#define WM8994_AUTO_INC_WIDTH                        1  /* AUTO_INC */
-
-/*
- * R272 (0x110) - Write Sequencer Ctrl (1)
- */
-#define WM8994_WSEQ_ENA                         0x8000  /* WSEQ_ENA */
-#define WM8994_WSEQ_ENA_MASK                    0x8000  /* WSEQ_ENA */
-#define WM8994_WSEQ_ENA_SHIFT                       15  /* WSEQ_ENA */
-#define WM8994_WSEQ_ENA_WIDTH                        1  /* WSEQ_ENA */
-#define WM8994_WSEQ_ABORT                       0x0200  /* WSEQ_ABORT */
-#define WM8994_WSEQ_ABORT_MASK                  0x0200  /* WSEQ_ABORT */
-#define WM8994_WSEQ_ABORT_SHIFT                      9  /* WSEQ_ABORT */
-#define WM8994_WSEQ_ABORT_WIDTH                      1  /* WSEQ_ABORT */
-#define WM8994_WSEQ_START                       0x0100  /* WSEQ_START */
-#define WM8994_WSEQ_START_MASK                  0x0100  /* WSEQ_START */
-#define WM8994_WSEQ_START_SHIFT                      8  /* WSEQ_START */
-#define WM8994_WSEQ_START_WIDTH                      1  /* WSEQ_START */
-#define WM8994_WSEQ_START_INDEX_MASK            0x007F  /* WSEQ_START_INDEX - [6:0] */
-#define WM8994_WSEQ_START_INDEX_SHIFT                0  /* WSEQ_START_INDEX - [6:0] */
-#define WM8994_WSEQ_START_INDEX_WIDTH                7  /* WSEQ_START_INDEX - [6:0] */
-
-/*
- * R273 (0x111) - Write Sequencer Ctrl (2)
- */
-#define WM8994_WSEQ_BUSY                        0x0100  /* WSEQ_BUSY */
-#define WM8994_WSEQ_BUSY_MASK                   0x0100  /* WSEQ_BUSY */
-#define WM8994_WSEQ_BUSY_SHIFT                       8  /* WSEQ_BUSY */
-#define WM8994_WSEQ_BUSY_WIDTH                       1  /* WSEQ_BUSY */
-#define WM8994_WSEQ_CURRENT_INDEX_MASK          0x007F  /* WSEQ_CURRENT_INDEX - [6:0] */
-#define WM8994_WSEQ_CURRENT_INDEX_SHIFT              0  /* WSEQ_CURRENT_INDEX - [6:0] */
-#define WM8994_WSEQ_CURRENT_INDEX_WIDTH              7  /* WSEQ_CURRENT_INDEX - [6:0] */
-
-/*
- * R512 (0x200) - AIF1 Clocking (1)
- */
-#define WM8994_AIF1CLK_SRC_MASK                 0x0018  /* AIF1CLK_SRC - [4:3] */
-#define WM8994_AIF1CLK_SRC_SHIFT                     3  /* AIF1CLK_SRC - [4:3] */
-#define WM8994_AIF1CLK_SRC_WIDTH                     2  /* AIF1CLK_SRC - [4:3] */
-#define WM8994_AIF1CLK_INV                      0x0004  /* AIF1CLK_INV */
-#define WM8994_AIF1CLK_INV_MASK                 0x0004  /* AIF1CLK_INV */
-#define WM8994_AIF1CLK_INV_SHIFT                     2  /* AIF1CLK_INV */
-#define WM8994_AIF1CLK_INV_WIDTH                     1  /* AIF1CLK_INV */
-#define WM8994_AIF1CLK_DIV                      0x0002  /* AIF1CLK_DIV */
-#define WM8994_AIF1CLK_DIV_MASK                 0x0002  /* AIF1CLK_DIV */
-#define WM8994_AIF1CLK_DIV_SHIFT                     1  /* AIF1CLK_DIV */
-#define WM8994_AIF1CLK_DIV_WIDTH                     1  /* AIF1CLK_DIV */
-#define WM8994_AIF1CLK_ENA                      0x0001  /* AIF1CLK_ENA */
-#define WM8994_AIF1CLK_ENA_MASK                 0x0001  /* AIF1CLK_ENA */
-#define WM8994_AIF1CLK_ENA_SHIFT                     0  /* AIF1CLK_ENA */
-#define WM8994_AIF1CLK_ENA_WIDTH                     1  /* AIF1CLK_ENA */
-
-/*
- * R513 (0x201) - AIF1 Clocking (2)
- */
-#define WM8994_AIF1DAC_DIV_MASK                 0x0038  /* AIF1DAC_DIV - [5:3] */
-#define WM8994_AIF1DAC_DIV_SHIFT                     3  /* AIF1DAC_DIV - [5:3] */
-#define WM8994_AIF1DAC_DIV_WIDTH                     3  /* AIF1DAC_DIV - [5:3] */
-#define WM8994_AIF1ADC_DIV_MASK                 0x0007  /* AIF1ADC_DIV - [2:0] */
-#define WM8994_AIF1ADC_DIV_SHIFT                     0  /* AIF1ADC_DIV - [2:0] */
-#define WM8994_AIF1ADC_DIV_WIDTH                     3  /* AIF1ADC_DIV - [2:0] */
-
-/*
- * R516 (0x204) - AIF2 Clocking (1)
- */
-#define WM8994_AIF2CLK_SRC_MASK                 0x0018  /* AIF2CLK_SRC - [4:3] */
-#define WM8994_AIF2CLK_SRC_SHIFT                     3  /* AIF2CLK_SRC - [4:3] */
-#define WM8994_AIF2CLK_SRC_WIDTH                     2  /* AIF2CLK_SRC - [4:3] */
-#define WM8994_AIF2CLK_INV                      0x0004  /* AIF2CLK_INV */
-#define WM8994_AIF2CLK_INV_MASK                 0x0004  /* AIF2CLK_INV */
-#define WM8994_AIF2CLK_INV_SHIFT                     2  /* AIF2CLK_INV */
-#define WM8994_AIF2CLK_INV_WIDTH                     1  /* AIF2CLK_INV */
-#define WM8994_AIF2CLK_DIV                      0x0002  /* AIF2CLK_DIV */
-#define WM8994_AIF2CLK_DIV_MASK                 0x0002  /* AIF2CLK_DIV */
-#define WM8994_AIF2CLK_DIV_SHIFT                     1  /* AIF2CLK_DIV */
-#define WM8994_AIF2CLK_DIV_WIDTH                     1  /* AIF2CLK_DIV */
-#define WM8994_AIF2CLK_ENA                      0x0001  /* AIF2CLK_ENA */
-#define WM8994_AIF2CLK_ENA_MASK                 0x0001  /* AIF2CLK_ENA */
-#define WM8994_AIF2CLK_ENA_SHIFT                     0  /* AIF2CLK_ENA */
-#define WM8994_AIF2CLK_ENA_WIDTH                     1  /* AIF2CLK_ENA */
-
-/*
- * R517 (0x205) - AIF2 Clocking (2)
- */
-#define WM8994_AIF2DAC_DIV_MASK                 0x0038  /* AIF2DAC_DIV - [5:3] */
-#define WM8994_AIF2DAC_DIV_SHIFT                     3  /* AIF2DAC_DIV - [5:3] */
-#define WM8994_AIF2DAC_DIV_WIDTH                     3  /* AIF2DAC_DIV - [5:3] */
-#define WM8994_AIF2ADC_DIV_MASK                 0x0007  /* AIF2ADC_DIV - [2:0] */
-#define WM8994_AIF2ADC_DIV_SHIFT                     0  /* AIF2ADC_DIV - [2:0] */
-#define WM8994_AIF2ADC_DIV_WIDTH                     3  /* AIF2ADC_DIV - [2:0] */
-
-/*
- * R520 (0x208) - Clocking (1)
- */
-#define WM8958_DSP2CLK_ENA                      0x4000  /* DSP2CLK_ENA */
-#define WM8958_DSP2CLK_ENA_MASK                 0x4000  /* DSP2CLK_ENA */
-#define WM8958_DSP2CLK_ENA_SHIFT                    14  /* DSP2CLK_ENA */
-#define WM8958_DSP2CLK_ENA_WIDTH                     1  /* DSP2CLK_ENA */
-#define WM8958_DSP2CLK_SRC                      0x1000  /* DSP2CLK_SRC */
-#define WM8958_DSP2CLK_SRC_MASK                 0x1000  /* DSP2CLK_SRC */
-#define WM8958_DSP2CLK_SRC_SHIFT                    12  /* DSP2CLK_SRC */
-#define WM8958_DSP2CLK_SRC_WIDTH                     1  /* DSP2CLK_SRC */
-#define WM8994_TOCLK_ENA                        0x0010  /* TOCLK_ENA */
-#define WM8994_TOCLK_ENA_MASK                   0x0010  /* TOCLK_ENA */
-#define WM8994_TOCLK_ENA_SHIFT                       4  /* TOCLK_ENA */
-#define WM8994_TOCLK_ENA_WIDTH                       1  /* TOCLK_ENA */
-#define WM8994_AIF1DSPCLK_ENA                   0x0008  /* AIF1DSPCLK_ENA */
-#define WM8994_AIF1DSPCLK_ENA_MASK              0x0008  /* AIF1DSPCLK_ENA */
-#define WM8994_AIF1DSPCLK_ENA_SHIFT                  3  /* AIF1DSPCLK_ENA */
-#define WM8994_AIF1DSPCLK_ENA_WIDTH                  1  /* AIF1DSPCLK_ENA */
-#define WM8994_AIF2DSPCLK_ENA                   0x0004  /* AIF2DSPCLK_ENA */
-#define WM8994_AIF2DSPCLK_ENA_MASK              0x0004  /* AIF2DSPCLK_ENA */
-#define WM8994_AIF2DSPCLK_ENA_SHIFT                  2  /* AIF2DSPCLK_ENA */
-#define WM8994_AIF2DSPCLK_ENA_WIDTH                  1  /* AIF2DSPCLK_ENA */
-#define WM8994_SYSDSPCLK_ENA                    0x0002  /* SYSDSPCLK_ENA */
-#define WM8994_SYSDSPCLK_ENA_MASK               0x0002  /* SYSDSPCLK_ENA */
-#define WM8994_SYSDSPCLK_ENA_SHIFT                   1  /* SYSDSPCLK_ENA */
-#define WM8994_SYSDSPCLK_ENA_WIDTH                   1  /* SYSDSPCLK_ENA */
-#define WM8994_SYSCLK_SRC                       0x0001  /* SYSCLK_SRC */
-#define WM8994_SYSCLK_SRC_MASK                  0x0001  /* SYSCLK_SRC */
-#define WM8994_SYSCLK_SRC_SHIFT                      0  /* SYSCLK_SRC */
-#define WM8994_SYSCLK_SRC_WIDTH                      1  /* SYSCLK_SRC */
-
-/*
- * R521 (0x209) - Clocking (2)
- */
-#define WM8994_TOCLK_DIV_MASK                   0x0700  /* TOCLK_DIV - [10:8] */
-#define WM8994_TOCLK_DIV_SHIFT                       8  /* TOCLK_DIV - [10:8] */
-#define WM8994_TOCLK_DIV_WIDTH                       3  /* TOCLK_DIV - [10:8] */
-#define WM8994_DBCLK_DIV_MASK                   0x0070  /* DBCLK_DIV - [6:4] */
-#define WM8994_DBCLK_DIV_SHIFT                       4  /* DBCLK_DIV - [6:4] */
-#define WM8994_DBCLK_DIV_WIDTH                       3  /* DBCLK_DIV - [6:4] */
-#define WM8994_OPCLK_DIV_MASK                   0x0007  /* OPCLK_DIV - [2:0] */
-#define WM8994_OPCLK_DIV_SHIFT                       0  /* OPCLK_DIV - [2:0] */
-#define WM8994_OPCLK_DIV_WIDTH                       3  /* OPCLK_DIV - [2:0] */
-
-/*
- * R528 (0x210) - AIF1 Rate
- */
-#define WM8994_AIF1_SR_MASK                     0x00F0  /* AIF1_SR - [7:4] */
-#define WM8994_AIF1_SR_SHIFT                         4  /* AIF1_SR - [7:4] */
-#define WM8994_AIF1_SR_WIDTH                         4  /* AIF1_SR - [7:4] */
-#define WM8994_AIF1CLK_RATE_MASK                0x000F  /* AIF1CLK_RATE - [3:0] */
-#define WM8994_AIF1CLK_RATE_SHIFT                    0  /* AIF1CLK_RATE - [3:0] */
-#define WM8994_AIF1CLK_RATE_WIDTH                    4  /* AIF1CLK_RATE - [3:0] */
-
-/*
- * R529 (0x211) - AIF2 Rate
- */
-#define WM8994_AIF2_SR_MASK                     0x00F0  /* AIF2_SR - [7:4] */
-#define WM8994_AIF2_SR_SHIFT                         4  /* AIF2_SR - [7:4] */
-#define WM8994_AIF2_SR_WIDTH                         4  /* AIF2_SR - [7:4] */
-#define WM8994_AIF2CLK_RATE_MASK                0x000F  /* AIF2CLK_RATE - [3:0] */
-#define WM8994_AIF2CLK_RATE_SHIFT                    0  /* AIF2CLK_RATE - [3:0] */
-#define WM8994_AIF2CLK_RATE_WIDTH                    4  /* AIF2CLK_RATE - [3:0] */
-
-/*
- * R530 (0x212) - Rate Status
- */
-#define WM8994_SR_ERROR_MASK                    0x000F  /* SR_ERROR - [3:0] */
-#define WM8994_SR_ERROR_SHIFT                        0  /* SR_ERROR - [3:0] */
-#define WM8994_SR_ERROR_WIDTH                        4  /* SR_ERROR - [3:0] */
-
-/*
- * R544 (0x220) - FLL1 Control (1)
- */
-#define WM8994_FLL1_FRAC                        0x0004  /* FLL1_FRAC */
-#define WM8994_FLL1_FRAC_MASK                   0x0004  /* FLL1_FRAC */
-#define WM8994_FLL1_FRAC_SHIFT                       2  /* FLL1_FRAC */
-#define WM8994_FLL1_FRAC_WIDTH                       1  /* FLL1_FRAC */
-#define WM8994_FLL1_OSC_ENA                     0x0002  /* FLL1_OSC_ENA */
-#define WM8994_FLL1_OSC_ENA_MASK                0x0002  /* FLL1_OSC_ENA */
-#define WM8994_FLL1_OSC_ENA_SHIFT                    1  /* FLL1_OSC_ENA */
-#define WM8994_FLL1_OSC_ENA_WIDTH                    1  /* FLL1_OSC_ENA */
-#define WM8994_FLL1_ENA                         0x0001  /* FLL1_ENA */
-#define WM8994_FLL1_ENA_MASK                    0x0001  /* FLL1_ENA */
-#define WM8994_FLL1_ENA_SHIFT                        0  /* FLL1_ENA */
-#define WM8994_FLL1_ENA_WIDTH                        1  /* FLL1_ENA */
-
-/*
- * R545 (0x221) - FLL1 Control (2)
- */
-#define WM8994_FLL1_OUTDIV_MASK                 0x3F00  /* FLL1_OUTDIV - [13:8] */
-#define WM8994_FLL1_OUTDIV_SHIFT                     8  /* FLL1_OUTDIV - [13:8] */
-#define WM8994_FLL1_OUTDIV_WIDTH                     6  /* FLL1_OUTDIV - [13:8] */
-#define WM8994_FLL1_CTRL_RATE_MASK              0x0070  /* FLL1_CTRL_RATE - [6:4] */
-#define WM8994_FLL1_CTRL_RATE_SHIFT                  4  /* FLL1_CTRL_RATE - [6:4] */
-#define WM8994_FLL1_CTRL_RATE_WIDTH                  3  /* FLL1_CTRL_RATE - [6:4] */
-#define WM8994_FLL1_FRATIO_MASK                 0x0007  /* FLL1_FRATIO - [2:0] */
-#define WM8994_FLL1_FRATIO_SHIFT                     0  /* FLL1_FRATIO - [2:0] */
-#define WM8994_FLL1_FRATIO_WIDTH                     3  /* FLL1_FRATIO - [2:0] */
-
-/*
- * R546 (0x222) - FLL1 Control (3)
- */
-#define WM8994_FLL1_K_MASK                      0xFFFF  /* FLL1_K - [15:0] */
-#define WM8994_FLL1_K_SHIFT                          0  /* FLL1_K - [15:0] */
-#define WM8994_FLL1_K_WIDTH                         16  /* FLL1_K - [15:0] */
-
-/*
- * R547 (0x223) - FLL1 Control (4)
- */
-#define WM8994_FLL1_N_MASK                      0x7FE0  /* FLL1_N - [14:5] */
-#define WM8994_FLL1_N_SHIFT                          5  /* FLL1_N - [14:5] */
-#define WM8994_FLL1_N_WIDTH                         10  /* FLL1_N - [14:5] */
-#define WM8994_FLL1_LOOP_GAIN_MASK              0x000F  /* FLL1_LOOP_GAIN - [3:0] */
-#define WM8994_FLL1_LOOP_GAIN_SHIFT                  0  /* FLL1_LOOP_GAIN - [3:0] */
-#define WM8994_FLL1_LOOP_GAIN_WIDTH                  4  /* FLL1_LOOP_GAIN - [3:0] */
-
-/*
- * R548 (0x224) - FLL1 Control (5)
- */
-#define WM8958_FLL1_BYP                         0x8000  /* FLL1_BYP */
-#define WM8958_FLL1_BYP_MASK                    0x8000  /* FLL1_BYP */
-#define WM8958_FLL1_BYP_SHIFT                       15  /* FLL1_BYP */
-#define WM8958_FLL1_BYP_WIDTH                        1  /* FLL1_BYP */
-#define WM8994_FLL1_FRC_NCO_VAL_MASK            0x1F80  /* FLL1_FRC_NCO_VAL - [12:7] */
-#define WM8994_FLL1_FRC_NCO_VAL_SHIFT                7  /* FLL1_FRC_NCO_VAL - [12:7] */
-#define WM8994_FLL1_FRC_NCO_VAL_WIDTH                6  /* FLL1_FRC_NCO_VAL - [12:7] */
-#define WM8994_FLL1_FRC_NCO                     0x0040  /* FLL1_FRC_NCO */
-#define WM8994_FLL1_FRC_NCO_MASK                0x0040  /* FLL1_FRC_NCO */
-#define WM8994_FLL1_FRC_NCO_SHIFT                    6  /* FLL1_FRC_NCO */
-#define WM8994_FLL1_FRC_NCO_WIDTH                    1  /* FLL1_FRC_NCO */
-#define WM8994_FLL1_REFCLK_DIV_MASK             0x0018  /* FLL1_REFCLK_DIV - [4:3] */
-#define WM8994_FLL1_REFCLK_DIV_SHIFT                 3  /* FLL1_REFCLK_DIV - [4:3] */
-#define WM8994_FLL1_REFCLK_DIV_WIDTH                 2  /* FLL1_REFCLK_DIV - [4:3] */
-#define WM8994_FLL1_REFCLK_SRC_MASK             0x0003  /* FLL1_REFCLK_SRC - [1:0] */
-#define WM8994_FLL1_REFCLK_SRC_SHIFT                 0  /* FLL1_REFCLK_SRC - [1:0] */
-#define WM8994_FLL1_REFCLK_SRC_WIDTH                 2  /* FLL1_REFCLK_SRC - [1:0] */
-
-/*
- * R550 (0x226) - FLL1 EFS 1
- */
-#define WM8958_FLL1_LAMBDA_MASK                 0xFFFF  /* FLL1_LAMBDA - [15:0] */
-#define WM8958_FLL1_LAMBDA_SHIFT                     0  /* FLL1_LAMBDA - [15:0] */
-#define WM8958_FLL1_LAMBDA_WIDTH                    16  /* FLL1_LAMBDA - [15:0] */
-
-/*
- * R551 (0x227) - FLL1 EFS 2
- */
-#define WM8958_FLL1_LFSR_SEL_MASK               0x0006  /* FLL1_LFSR_SEL - [2:1] */
-#define WM8958_FLL1_LFSR_SEL_SHIFT                   1  /* FLL1_LFSR_SEL - [2:1] */
-#define WM8958_FLL1_LFSR_SEL_WIDTH                   2  /* FLL1_LFSR_SEL - [2:1] */
-#define WM8958_FLL1_EFS_ENA                     0x0001  /* FLL1_EFS_ENA */
-#define WM8958_FLL1_EFS_ENA_MASK                0x0001  /* FLL1_EFS_ENA */
-#define WM8958_FLL1_EFS_ENA_SHIFT                    0  /* FLL1_EFS_ENA */
-#define WM8958_FLL1_EFS_ENA_WIDTH                    1  /* FLL1_EFS_ENA */
-
-/*
- * R576 (0x240) - FLL2 Control (1)
- */
-#define WM8994_FLL2_FRAC                        0x0004  /* FLL2_FRAC */
-#define WM8994_FLL2_FRAC_MASK                   0x0004  /* FLL2_FRAC */
-#define WM8994_FLL2_FRAC_SHIFT                       2  /* FLL2_FRAC */
-#define WM8994_FLL2_FRAC_WIDTH                       1  /* FLL2_FRAC */
-#define WM8994_FLL2_OSC_ENA                     0x0002  /* FLL2_OSC_ENA */
-#define WM8994_FLL2_OSC_ENA_MASK                0x0002  /* FLL2_OSC_ENA */
-#define WM8994_FLL2_OSC_ENA_SHIFT                    1  /* FLL2_OSC_ENA */
-#define WM8994_FLL2_OSC_ENA_WIDTH                    1  /* FLL2_OSC_ENA */
-#define WM8994_FLL2_ENA                         0x0001  /* FLL2_ENA */
-#define WM8994_FLL2_ENA_MASK                    0x0001  /* FLL2_ENA */
-#define WM8994_FLL2_ENA_SHIFT                        0  /* FLL2_ENA */
-#define WM8994_FLL2_ENA_WIDTH                        1  /* FLL2_ENA */
-
-/*
- * R577 (0x241) - FLL2 Control (2)
- */
-#define WM8994_FLL2_OUTDIV_MASK                 0x3F00  /* FLL2_OUTDIV - [13:8] */
-#define WM8994_FLL2_OUTDIV_SHIFT                     8  /* FLL2_OUTDIV - [13:8] */
-#define WM8994_FLL2_OUTDIV_WIDTH                     6  /* FLL2_OUTDIV - [13:8] */
-#define WM8994_FLL2_CTRL_RATE_MASK              0x0070  /* FLL2_CTRL_RATE - [6:4] */
-#define WM8994_FLL2_CTRL_RATE_SHIFT                  4  /* FLL2_CTRL_RATE - [6:4] */
-#define WM8994_FLL2_CTRL_RATE_WIDTH                  3  /* FLL2_CTRL_RATE - [6:4] */
-#define WM8994_FLL2_FRATIO_MASK                 0x0007  /* FLL2_FRATIO - [2:0] */
-#define WM8994_FLL2_FRATIO_SHIFT                     0  /* FLL2_FRATIO - [2:0] */
-#define WM8994_FLL2_FRATIO_WIDTH                     3  /* FLL2_FRATIO - [2:0] */
-
-/*
- * R578 (0x242) - FLL2 Control (3)
- */
-#define WM8994_FLL2_K_MASK                      0xFFFF  /* FLL2_K - [15:0] */
-#define WM8994_FLL2_K_SHIFT                          0  /* FLL2_K - [15:0] */
-#define WM8994_FLL2_K_WIDTH                         16  /* FLL2_K - [15:0] */
-
-/*
- * R579 (0x243) - FLL2 Control (4)
- */
-#define WM8994_FLL2_N_MASK                      0x7FE0  /* FLL2_N - [14:5] */
-#define WM8994_FLL2_N_SHIFT                          5  /* FLL2_N - [14:5] */
-#define WM8994_FLL2_N_WIDTH                         10  /* FLL2_N - [14:5] */
-#define WM8994_FLL2_LOOP_GAIN_MASK              0x000F  /* FLL2_LOOP_GAIN - [3:0] */
-#define WM8994_FLL2_LOOP_GAIN_SHIFT                  0  /* FLL2_LOOP_GAIN - [3:0] */
-#define WM8994_FLL2_LOOP_GAIN_WIDTH                  4  /* FLL2_LOOP_GAIN - [3:0] */
-
-/*
- * R580 (0x244) - FLL2 Control (5)
- */
-#define WM8958_FLL2_BYP                         0x8000  /* FLL2_BYP */
-#define WM8958_FLL2_BYP_MASK                    0x8000  /* FLL2_BYP */
-#define WM8958_FLL2_BYP_SHIFT                       15  /* FLL2_BYP */
-#define WM8958_FLL2_BYP_WIDTH                        1  /* FLL2_BYP */
-#define WM8994_FLL2_FRC_NCO_VAL_MASK            0x1F80  /* FLL2_FRC_NCO_VAL - [12:7] */
-#define WM8994_FLL2_FRC_NCO_VAL_SHIFT                7  /* FLL2_FRC_NCO_VAL - [12:7] */
-#define WM8994_FLL2_FRC_NCO_VAL_WIDTH                6  /* FLL2_FRC_NCO_VAL - [12:7] */
-#define WM8994_FLL2_FRC_NCO                     0x0040  /* FLL2_FRC_NCO */
-#define WM8994_FLL2_FRC_NCO_MASK                0x0040  /* FLL2_FRC_NCO */
-#define WM8994_FLL2_FRC_NCO_SHIFT                    6  /* FLL2_FRC_NCO */
-#define WM8994_FLL2_FRC_NCO_WIDTH                    1  /* FLL2_FRC_NCO */
-#define WM8994_FLL2_REFCLK_DIV_MASK             0x0018  /* FLL2_REFCLK_DIV - [4:3] */
-#define WM8994_FLL2_REFCLK_DIV_SHIFT                 3  /* FLL2_REFCLK_DIV - [4:3] */
-#define WM8994_FLL2_REFCLK_DIV_WIDTH                 2  /* FLL2_REFCLK_DIV - [4:3] */
-#define WM8994_FLL2_REFCLK_SRC_MASK             0x0003  /* FLL2_REFCLK_SRC - [1:0] */
-#define WM8994_FLL2_REFCLK_SRC_SHIFT                 0  /* FLL2_REFCLK_SRC - [1:0] */
-#define WM8994_FLL2_REFCLK_SRC_WIDTH                 2  /* FLL2_REFCLK_SRC - [1:0] */
-
-/*
- * R582 (0x246) - FLL2 EFS 1
- */
-#define WM8958_FLL2_LAMBDA_MASK                 0xFFFF  /* FLL2_LAMBDA - [15:0] */
-#define WM8958_FLL2_LAMBDA_SHIFT                     0  /* FLL2_LAMBDA - [15:0] */
-#define WM8958_FLL2_LAMBDA_WIDTH                    16  /* FLL2_LAMBDA - [15:0] */
-
-/*
- * R583 (0x247) - FLL2 EFS 2
- */
-#define WM8958_FLL2_LFSR_SEL_MASK               0x0006  /* FLL2_LFSR_SEL - [2:1] */
-#define WM8958_FLL2_LFSR_SEL_SHIFT                   1  /* FLL2_LFSR_SEL - [2:1] */
-#define WM8958_FLL2_LFSR_SEL_WIDTH                   2  /* FLL2_LFSR_SEL - [2:1] */
-#define WM8958_FLL2_EFS_ENA                     0x0001  /* FLL2_EFS_ENA */
-#define WM8958_FLL2_EFS_ENA_MASK                0x0001  /* FLL2_EFS_ENA */
-#define WM8958_FLL2_EFS_ENA_SHIFT                    0  /* FLL2_EFS_ENA */
-#define WM8958_FLL2_EFS_ENA_WIDTH                    1  /* FLL2_EFS_ENA */
-
-/*
- * R768 (0x300) - AIF1 Control (1)
- */
-#define WM8994_AIF1ADCL_SRC                     0x8000  /* AIF1ADCL_SRC */
-#define WM8994_AIF1ADCL_SRC_MASK                0x8000  /* AIF1ADCL_SRC */
-#define WM8994_AIF1ADCL_SRC_SHIFT                   15  /* AIF1ADCL_SRC */
-#define WM8994_AIF1ADCL_SRC_WIDTH                    1  /* AIF1ADCL_SRC */
-#define WM8994_AIF1ADCR_SRC                     0x4000  /* AIF1ADCR_SRC */
-#define WM8994_AIF1ADCR_SRC_MASK                0x4000  /* AIF1ADCR_SRC */
-#define WM8994_AIF1ADCR_SRC_SHIFT                   14  /* AIF1ADCR_SRC */
-#define WM8994_AIF1ADCR_SRC_WIDTH                    1  /* AIF1ADCR_SRC */
-#define WM8994_AIF1ADC_TDM                      0x2000  /* AIF1ADC_TDM */
-#define WM8994_AIF1ADC_TDM_MASK                 0x2000  /* AIF1ADC_TDM */
-#define WM8994_AIF1ADC_TDM_SHIFT                    13  /* AIF1ADC_TDM */
-#define WM8994_AIF1ADC_TDM_WIDTH                     1  /* AIF1ADC_TDM */
-#define WM8994_AIF1_BCLK_INV                    0x0100  /* AIF1_BCLK_INV */
-#define WM8994_AIF1_BCLK_INV_MASK               0x0100  /* AIF1_BCLK_INV */
-#define WM8994_AIF1_BCLK_INV_SHIFT                   8  /* AIF1_BCLK_INV */
-#define WM8994_AIF1_BCLK_INV_WIDTH                   1  /* AIF1_BCLK_INV */
-#define WM8994_AIF1_LRCLK_INV                   0x0080  /* AIF1_LRCLK_INV */
-#define WM8994_AIF1_LRCLK_INV_MASK              0x0080  /* AIF1_LRCLK_INV */
-#define WM8994_AIF1_LRCLK_INV_SHIFT                  7  /* AIF1_LRCLK_INV */
-#define WM8994_AIF1_LRCLK_INV_WIDTH                  1  /* AIF1_LRCLK_INV */
-#define WM8994_AIF1_WL_MASK                     0x0060  /* AIF1_WL - [6:5] */
-#define WM8994_AIF1_WL_SHIFT                         5  /* AIF1_WL - [6:5] */
-#define WM8994_AIF1_WL_WIDTH                         2  /* AIF1_WL - [6:5] */
-#define WM8994_AIF1_FMT_MASK                    0x0018  /* AIF1_FMT - [4:3] */
-#define WM8994_AIF1_FMT_SHIFT                        3  /* AIF1_FMT - [4:3] */
-#define WM8994_AIF1_FMT_WIDTH                        2  /* AIF1_FMT - [4:3] */
-
-/*
- * R769 (0x301) - AIF1 Control (2)
- */
-#define WM8994_AIF1DACL_SRC                     0x8000  /* AIF1DACL_SRC */
-#define WM8994_AIF1DACL_SRC_MASK                0x8000  /* AIF1DACL_SRC */
-#define WM8994_AIF1DACL_SRC_SHIFT                   15  /* AIF1DACL_SRC */
-#define WM8994_AIF1DACL_SRC_WIDTH                    1  /* AIF1DACL_SRC */
-#define WM8994_AIF1DACR_SRC                     0x4000  /* AIF1DACR_SRC */
-#define WM8994_AIF1DACR_SRC_MASK                0x4000  /* AIF1DACR_SRC */
-#define WM8994_AIF1DACR_SRC_SHIFT                   14  /* AIF1DACR_SRC */
-#define WM8994_AIF1DACR_SRC_WIDTH                    1  /* AIF1DACR_SRC */
-#define WM8994_AIF1DAC_BOOST_MASK               0x0C00  /* AIF1DAC_BOOST - [11:10] */
-#define WM8994_AIF1DAC_BOOST_SHIFT                  10  /* AIF1DAC_BOOST - [11:10] */
-#define WM8994_AIF1DAC_BOOST_WIDTH                   2  /* AIF1DAC_BOOST - [11:10] */
-#define WM8994_AIF1_MONO                        0x0100  /* AIF1_MONO */
-#define WM8994_AIF1_MONO_MASK                   0x0100  /* AIF1_MONO */
-#define WM8994_AIF1_MONO_SHIFT                       8  /* AIF1_MONO */
-#define WM8994_AIF1_MONO_WIDTH                       1  /* AIF1_MONO */
-#define WM8994_AIF1DAC_COMP                     0x0010  /* AIF1DAC_COMP */
-#define WM8994_AIF1DAC_COMP_MASK                0x0010  /* AIF1DAC_COMP */
-#define WM8994_AIF1DAC_COMP_SHIFT                    4  /* AIF1DAC_COMP */
-#define WM8994_AIF1DAC_COMP_WIDTH                    1  /* AIF1DAC_COMP */
-#define WM8994_AIF1DAC_COMPMODE                 0x0008  /* AIF1DAC_COMPMODE */
-#define WM8994_AIF1DAC_COMPMODE_MASK            0x0008  /* AIF1DAC_COMPMODE */
-#define WM8994_AIF1DAC_COMPMODE_SHIFT                3  /* AIF1DAC_COMPMODE */
-#define WM8994_AIF1DAC_COMPMODE_WIDTH                1  /* AIF1DAC_COMPMODE */
-#define WM8994_AIF1ADC_COMP                     0x0004  /* AIF1ADC_COMP */
-#define WM8994_AIF1ADC_COMP_MASK                0x0004  /* AIF1ADC_COMP */
-#define WM8994_AIF1ADC_COMP_SHIFT                    2  /* AIF1ADC_COMP */
-#define WM8994_AIF1ADC_COMP_WIDTH                    1  /* AIF1ADC_COMP */
-#define WM8994_AIF1ADC_COMPMODE                 0x0002  /* AIF1ADC_COMPMODE */
-#define WM8994_AIF1ADC_COMPMODE_MASK            0x0002  /* AIF1ADC_COMPMODE */
-#define WM8994_AIF1ADC_COMPMODE_SHIFT                1  /* AIF1ADC_COMPMODE */
-#define WM8994_AIF1ADC_COMPMODE_WIDTH                1  /* AIF1ADC_COMPMODE */
-#define WM8994_AIF1_LOOPBACK                    0x0001  /* AIF1_LOOPBACK */
-#define WM8994_AIF1_LOOPBACK_MASK               0x0001  /* AIF1_LOOPBACK */
-#define WM8994_AIF1_LOOPBACK_SHIFT                   0  /* AIF1_LOOPBACK */
-#define WM8994_AIF1_LOOPBACK_WIDTH                   1  /* AIF1_LOOPBACK */
-
-/*
- * R770 (0x302) - AIF1 Master/Slave
- */
-#define WM8994_AIF1_TRI                         0x8000  /* AIF1_TRI */
-#define WM8994_AIF1_TRI_MASK                    0x8000  /* AIF1_TRI */
-#define WM8994_AIF1_TRI_SHIFT                       15  /* AIF1_TRI */
-#define WM8994_AIF1_TRI_WIDTH                        1  /* AIF1_TRI */
-#define WM8994_AIF1_MSTR                        0x4000  /* AIF1_MSTR */
-#define WM8994_AIF1_MSTR_MASK                   0x4000  /* AIF1_MSTR */
-#define WM8994_AIF1_MSTR_SHIFT                      14  /* AIF1_MSTR */
-#define WM8994_AIF1_MSTR_WIDTH                       1  /* AIF1_MSTR */
-#define WM8994_AIF1_CLK_FRC                     0x2000  /* AIF1_CLK_FRC */
-#define WM8994_AIF1_CLK_FRC_MASK                0x2000  /* AIF1_CLK_FRC */
-#define WM8994_AIF1_CLK_FRC_SHIFT                   13  /* AIF1_CLK_FRC */
-#define WM8994_AIF1_CLK_FRC_WIDTH                    1  /* AIF1_CLK_FRC */
-#define WM8994_AIF1_LRCLK_FRC                   0x1000  /* AIF1_LRCLK_FRC */
-#define WM8994_AIF1_LRCLK_FRC_MASK              0x1000  /* AIF1_LRCLK_FRC */
-#define WM8994_AIF1_LRCLK_FRC_SHIFT                 12  /* AIF1_LRCLK_FRC */
-#define WM8994_AIF1_LRCLK_FRC_WIDTH                  1  /* AIF1_LRCLK_FRC */
-
-/*
- * R771 (0x303) - AIF1 BCLK
- */
-#define WM8994_AIF1_BCLK_DIV_MASK               0x01F0  /* AIF1_BCLK_DIV - [8:4] */
-#define WM8994_AIF1_BCLK_DIV_SHIFT                   4  /* AIF1_BCLK_DIV - [8:4] */
-#define WM8994_AIF1_BCLK_DIV_WIDTH                   5  /* AIF1_BCLK_DIV - [8:4] */
-
-/*
- * R772 (0x304) - AIF1ADC LRCLK
- */
-#define WM8994_AIF1ADC_LRCLK_DIR                0x0800  /* AIF1ADC_LRCLK_DIR */
-#define WM8994_AIF1ADC_LRCLK_DIR_MASK           0x0800  /* AIF1ADC_LRCLK_DIR */
-#define WM8994_AIF1ADC_LRCLK_DIR_SHIFT              11  /* AIF1ADC_LRCLK_DIR */
-#define WM8994_AIF1ADC_LRCLK_DIR_WIDTH               1  /* AIF1ADC_LRCLK_DIR */
-#define WM8994_AIF1ADC_RATE_MASK                0x07FF  /* AIF1ADC_RATE - [10:0] */
-#define WM8994_AIF1ADC_RATE_SHIFT                    0  /* AIF1ADC_RATE - [10:0] */
-#define WM8994_AIF1ADC_RATE_WIDTH                   11  /* AIF1ADC_RATE - [10:0] */
-
-/*
- * R773 (0x305) - AIF1DAC LRCLK
- */
-#define WM8994_AIF1DAC_LRCLK_DIR                0x0800  /* AIF1DAC_LRCLK_DIR */
-#define WM8994_AIF1DAC_LRCLK_DIR_MASK           0x0800  /* AIF1DAC_LRCLK_DIR */
-#define WM8994_AIF1DAC_LRCLK_DIR_SHIFT              11  /* AIF1DAC_LRCLK_DIR */
-#define WM8994_AIF1DAC_LRCLK_DIR_WIDTH               1  /* AIF1DAC_LRCLK_DIR */
-#define WM8994_AIF1DAC_RATE_MASK                0x07FF  /* AIF1DAC_RATE - [10:0] */
-#define WM8994_AIF1DAC_RATE_SHIFT                    0  /* AIF1DAC_RATE - [10:0] */
-#define WM8994_AIF1DAC_RATE_WIDTH                   11  /* AIF1DAC_RATE - [10:0] */
-
-/*
- * R774 (0x306) - AIF1DAC Data
- */
-#define WM8994_AIF1DACL_DAT_INV                 0x0002  /* AIF1DACL_DAT_INV */
-#define WM8994_AIF1DACL_DAT_INV_MASK            0x0002  /* AIF1DACL_DAT_INV */
-#define WM8994_AIF1DACL_DAT_INV_SHIFT                1  /* AIF1DACL_DAT_INV */
-#define WM8994_AIF1DACL_DAT_INV_WIDTH                1  /* AIF1DACL_DAT_INV */
-#define WM8994_AIF1DACR_DAT_INV                 0x0001  /* AIF1DACR_DAT_INV */
-#define WM8994_AIF1DACR_DAT_INV_MASK            0x0001  /* AIF1DACR_DAT_INV */
-#define WM8994_AIF1DACR_DAT_INV_SHIFT                0  /* AIF1DACR_DAT_INV */
-#define WM8994_AIF1DACR_DAT_INV_WIDTH                1  /* AIF1DACR_DAT_INV */
-
-/*
- * R775 (0x307) - AIF1ADC Data
- */
-#define WM8994_AIF1ADCL_DAT_INV                 0x0002  /* AIF1ADCL_DAT_INV */
-#define WM8994_AIF1ADCL_DAT_INV_MASK            0x0002  /* AIF1ADCL_DAT_INV */
-#define WM8994_AIF1ADCL_DAT_INV_SHIFT                1  /* AIF1ADCL_DAT_INV */
-#define WM8994_AIF1ADCL_DAT_INV_WIDTH                1  /* AIF1ADCL_DAT_INV */
-#define WM8994_AIF1ADCR_DAT_INV                 0x0001  /* AIF1ADCR_DAT_INV */
-#define WM8994_AIF1ADCR_DAT_INV_MASK            0x0001  /* AIF1ADCR_DAT_INV */
-#define WM8994_AIF1ADCR_DAT_INV_SHIFT                0  /* AIF1ADCR_DAT_INV */
-#define WM8994_AIF1ADCR_DAT_INV_WIDTH                1  /* AIF1ADCR_DAT_INV */
-
-/*
- * R784 (0x310) - AIF2 Control (1)
- */
-#define WM8994_AIF2ADCL_SRC                     0x8000  /* AIF2ADCL_SRC */
-#define WM8994_AIF2ADCL_SRC_MASK                0x8000  /* AIF2ADCL_SRC */
-#define WM8994_AIF2ADCL_SRC_SHIFT                   15  /* AIF2ADCL_SRC */
-#define WM8994_AIF2ADCL_SRC_WIDTH                    1  /* AIF2ADCL_SRC */
-#define WM8994_AIF2ADCR_SRC                     0x4000  /* AIF2ADCR_SRC */
-#define WM8994_AIF2ADCR_SRC_MASK                0x4000  /* AIF2ADCR_SRC */
-#define WM8994_AIF2ADCR_SRC_SHIFT                   14  /* AIF2ADCR_SRC */
-#define WM8994_AIF2ADCR_SRC_WIDTH                    1  /* AIF2ADCR_SRC */
-#define WM8994_AIF2ADC_TDM                      0x2000  /* AIF2ADC_TDM */
-#define WM8994_AIF2ADC_TDM_MASK                 0x2000  /* AIF2ADC_TDM */
-#define WM8994_AIF2ADC_TDM_SHIFT                    13  /* AIF2ADC_TDM */
-#define WM8994_AIF2ADC_TDM_WIDTH                     1  /* AIF2ADC_TDM */
-#define WM8994_AIF2ADC_TDM_CHAN                 0x1000  /* AIF2ADC_TDM_CHAN */
-#define WM8994_AIF2ADC_TDM_CHAN_MASK            0x1000  /* AIF2ADC_TDM_CHAN */
-#define WM8994_AIF2ADC_TDM_CHAN_SHIFT               12  /* AIF2ADC_TDM_CHAN */
-#define WM8994_AIF2ADC_TDM_CHAN_WIDTH                1  /* AIF2ADC_TDM_CHAN */
-#define WM8994_AIF2_BCLK_INV                    0x0100  /* AIF2_BCLK_INV */
-#define WM8994_AIF2_BCLK_INV_MASK               0x0100  /* AIF2_BCLK_INV */
-#define WM8994_AIF2_BCLK_INV_SHIFT                   8  /* AIF2_BCLK_INV */
-#define WM8994_AIF2_BCLK_INV_WIDTH                   1  /* AIF2_BCLK_INV */
-#define WM8994_AIF2_LRCLK_INV                   0x0080  /* AIF2_LRCLK_INV */
-#define WM8994_AIF2_LRCLK_INV_MASK              0x0080  /* AIF2_LRCLK_INV */
-#define WM8994_AIF2_LRCLK_INV_SHIFT                  7  /* AIF2_LRCLK_INV */
-#define WM8994_AIF2_LRCLK_INV_WIDTH                  1  /* AIF2_LRCLK_INV */
-#define WM8994_AIF2_WL_MASK                     0x0060  /* AIF2_WL - [6:5] */
-#define WM8994_AIF2_WL_SHIFT                         5  /* AIF2_WL - [6:5] */
-#define WM8994_AIF2_WL_WIDTH                         2  /* AIF2_WL - [6:5] */
-#define WM8994_AIF2_FMT_MASK                    0x0018  /* AIF2_FMT - [4:3] */
-#define WM8994_AIF2_FMT_SHIFT                        3  /* AIF2_FMT - [4:3] */
-#define WM8994_AIF2_FMT_WIDTH                        2  /* AIF2_FMT - [4:3] */
-
-/*
- * R785 (0x311) - AIF2 Control (2)
- */
-#define WM8994_AIF2DACL_SRC                     0x8000  /* AIF2DACL_SRC */
-#define WM8994_AIF2DACL_SRC_MASK                0x8000  /* AIF2DACL_SRC */
-#define WM8994_AIF2DACL_SRC_SHIFT                   15  /* AIF2DACL_SRC */
-#define WM8994_AIF2DACL_SRC_WIDTH                    1  /* AIF2DACL_SRC */
-#define WM8994_AIF2DACR_SRC                     0x4000  /* AIF2DACR_SRC */
-#define WM8994_AIF2DACR_SRC_MASK                0x4000  /* AIF2DACR_SRC */
-#define WM8994_AIF2DACR_SRC_SHIFT                   14  /* AIF2DACR_SRC */
-#define WM8994_AIF2DACR_SRC_WIDTH                    1  /* AIF2DACR_SRC */
-#define WM8994_AIF2DAC_TDM                      0x2000  /* AIF2DAC_TDM */
-#define WM8994_AIF2DAC_TDM_MASK                 0x2000  /* AIF2DAC_TDM */
-#define WM8994_AIF2DAC_TDM_SHIFT                    13  /* AIF2DAC_TDM */
-#define WM8994_AIF2DAC_TDM_WIDTH                     1  /* AIF2DAC_TDM */
-#define WM8994_AIF2DAC_TDM_CHAN                 0x1000  /* AIF2DAC_TDM_CHAN */
-#define WM8994_AIF2DAC_TDM_CHAN_MASK            0x1000  /* AIF2DAC_TDM_CHAN */
-#define WM8994_AIF2DAC_TDM_CHAN_SHIFT               12  /* AIF2DAC_TDM_CHAN */
-#define WM8994_AIF2DAC_TDM_CHAN_WIDTH                1  /* AIF2DAC_TDM_CHAN */
-#define WM8994_AIF2DAC_BOOST_MASK               0x0C00  /* AIF2DAC_BOOST - [11:10] */
-#define WM8994_AIF2DAC_BOOST_SHIFT                  10  /* AIF2DAC_BOOST - [11:10] */
-#define WM8994_AIF2DAC_BOOST_WIDTH                   2  /* AIF2DAC_BOOST - [11:10] */
-#define WM8994_AIF2_MONO                        0x0100  /* AIF2_MONO */
-#define WM8994_AIF2_MONO_MASK                   0x0100  /* AIF2_MONO */
-#define WM8994_AIF2_MONO_SHIFT                       8  /* AIF2_MONO */
-#define WM8994_AIF2_MONO_WIDTH                       1  /* AIF2_MONO */
-#define WM8994_AIF2DAC_COMP                     0x0010  /* AIF2DAC_COMP */
-#define WM8994_AIF2DAC_COMP_MASK                0x0010  /* AIF2DAC_COMP */
-#define WM8994_AIF2DAC_COMP_SHIFT                    4  /* AIF2DAC_COMP */
-#define WM8994_AIF2DAC_COMP_WIDTH                    1  /* AIF2DAC_COMP */
-#define WM8994_AIF2DAC_COMPMODE                 0x0008  /* AIF2DAC_COMPMODE */
-#define WM8994_AIF2DAC_COMPMODE_MASK            0x0008  /* AIF2DAC_COMPMODE */
-#define WM8994_AIF2DAC_COMPMODE_SHIFT                3  /* AIF2DAC_COMPMODE */
-#define WM8994_AIF2DAC_COMPMODE_WIDTH                1  /* AIF2DAC_COMPMODE */
-#define WM8994_AIF2ADC_COMP                     0x0004  /* AIF2ADC_COMP */
-#define WM8994_AIF2ADC_COMP_MASK                0x0004  /* AIF2ADC_COMP */
-#define WM8994_AIF2ADC_COMP_SHIFT                    2  /* AIF2ADC_COMP */
-#define WM8994_AIF2ADC_COMP_WIDTH                    1  /* AIF2ADC_COMP */
-#define WM8994_AIF2ADC_COMPMODE                 0x0002  /* AIF2ADC_COMPMODE */
-#define WM8994_AIF2ADC_COMPMODE_MASK            0x0002  /* AIF2ADC_COMPMODE */
-#define WM8994_AIF2ADC_COMPMODE_SHIFT                1  /* AIF2ADC_COMPMODE */
-#define WM8994_AIF2ADC_COMPMODE_WIDTH                1  /* AIF2ADC_COMPMODE */
-#define WM8994_AIF2_LOOPBACK                    0x0001  /* AIF2_LOOPBACK */
-#define WM8994_AIF2_LOOPBACK_MASK               0x0001  /* AIF2_LOOPBACK */
-#define WM8994_AIF2_LOOPBACK_SHIFT                   0  /* AIF2_LOOPBACK */
-#define WM8994_AIF2_LOOPBACK_WIDTH                   1  /* AIF2_LOOPBACK */
-
-/*
- * R786 (0x312) - AIF2 Master/Slave
- */
-#define WM8994_AIF2_TRI                         0x8000  /* AIF2_TRI */
-#define WM8994_AIF2_TRI_MASK                    0x8000  /* AIF2_TRI */
-#define WM8994_AIF2_TRI_SHIFT                       15  /* AIF2_TRI */
-#define WM8994_AIF2_TRI_WIDTH                        1  /* AIF2_TRI */
-#define WM8994_AIF2_MSTR                        0x4000  /* AIF2_MSTR */
-#define WM8994_AIF2_MSTR_MASK                   0x4000  /* AIF2_MSTR */
-#define WM8994_AIF2_MSTR_SHIFT                      14  /* AIF2_MSTR */
-#define WM8994_AIF2_MSTR_WIDTH                       1  /* AIF2_MSTR */
-#define WM8994_AIF2_CLK_FRC                     0x2000  /* AIF2_CLK_FRC */
-#define WM8994_AIF2_CLK_FRC_MASK                0x2000  /* AIF2_CLK_FRC */
-#define WM8994_AIF2_CLK_FRC_SHIFT                   13  /* AIF2_CLK_FRC */
-#define WM8994_AIF2_CLK_FRC_WIDTH                    1  /* AIF2_CLK_FRC */
-#define WM8994_AIF2_LRCLK_FRC                   0x1000  /* AIF2_LRCLK_FRC */
-#define WM8994_AIF2_LRCLK_FRC_MASK              0x1000  /* AIF2_LRCLK_FRC */
-#define WM8994_AIF2_LRCLK_FRC_SHIFT                 12  /* AIF2_LRCLK_FRC */
-#define WM8994_AIF2_LRCLK_FRC_WIDTH                  1  /* AIF2_LRCLK_FRC */
-
-/*
- * R787 (0x313) - AIF2 BCLK
- */
-#define WM8994_AIF2_BCLK_DIV_MASK               0x01F0  /* AIF2_BCLK_DIV - [8:4] */
-#define WM8994_AIF2_BCLK_DIV_SHIFT                   4  /* AIF2_BCLK_DIV - [8:4] */
-#define WM8994_AIF2_BCLK_DIV_WIDTH                   5  /* AIF2_BCLK_DIV - [8:4] */
-
-/*
- * R788 (0x314) - AIF2ADC LRCLK
- */
-#define WM8994_AIF2ADC_LRCLK_DIR                0x0800  /* AIF2ADC_LRCLK_DIR */
-#define WM8994_AIF2ADC_LRCLK_DIR_MASK           0x0800  /* AIF2ADC_LRCLK_DIR */
-#define WM8994_AIF2ADC_LRCLK_DIR_SHIFT              11  /* AIF2ADC_LRCLK_DIR */
-#define WM8994_AIF2ADC_LRCLK_DIR_WIDTH               1  /* AIF2ADC_LRCLK_DIR */
-#define WM8994_AIF2ADC_RATE_MASK                0x07FF  /* AIF2ADC_RATE - [10:0] */
-#define WM8994_AIF2ADC_RATE_SHIFT                    0  /* AIF2ADC_RATE - [10:0] */
-#define WM8994_AIF2ADC_RATE_WIDTH                   11  /* AIF2ADC_RATE - [10:0] */
-
-/*
- * R789 (0x315) - AIF2DAC LRCLK
- */
-#define WM8994_AIF2DAC_LRCLK_DIR                0x0800  /* AIF2DAC_LRCLK_DIR */
-#define WM8994_AIF2DAC_LRCLK_DIR_MASK           0x0800  /* AIF2DAC_LRCLK_DIR */
-#define WM8994_AIF2DAC_LRCLK_DIR_SHIFT              11  /* AIF2DAC_LRCLK_DIR */
-#define WM8994_AIF2DAC_LRCLK_DIR_WIDTH               1  /* AIF2DAC_LRCLK_DIR */
-#define WM8994_AIF2DAC_RATE_MASK                0x07FF  /* AIF2DAC_RATE - [10:0] */
-#define WM8994_AIF2DAC_RATE_SHIFT                    0  /* AIF2DAC_RATE - [10:0] */
-#define WM8994_AIF2DAC_RATE_WIDTH                   11  /* AIF2DAC_RATE - [10:0] */
-
-/*
- * R790 (0x316) - AIF2DAC Data
- */
-#define WM8994_AIF2DACL_DAT_INV                 0x0002  /* AIF2DACL_DAT_INV */
-#define WM8994_AIF2DACL_DAT_INV_MASK            0x0002  /* AIF2DACL_DAT_INV */
-#define WM8994_AIF2DACL_DAT_INV_SHIFT                1  /* AIF2DACL_DAT_INV */
-#define WM8994_AIF2DACL_DAT_INV_WIDTH                1  /* AIF2DACL_DAT_INV */
-#define WM8994_AIF2DACR_DAT_INV                 0x0001  /* AIF2DACR_DAT_INV */
-#define WM8994_AIF2DACR_DAT_INV_MASK            0x0001  /* AIF2DACR_DAT_INV */
-#define WM8994_AIF2DACR_DAT_INV_SHIFT                0  /* AIF2DACR_DAT_INV */
-#define WM8994_AIF2DACR_DAT_INV_WIDTH                1  /* AIF2DACR_DAT_INV */
-
-/*
- * R791 (0x317) - AIF2ADC Data
- */
-#define WM8994_AIF2ADCL_DAT_INV                 0x0002  /* AIF2ADCL_DAT_INV */
-#define WM8994_AIF2ADCL_DAT_INV_MASK            0x0002  /* AIF2ADCL_DAT_INV */
-#define WM8994_AIF2ADCL_DAT_INV_SHIFT                1  /* AIF2ADCL_DAT_INV */
-#define WM8994_AIF2ADCL_DAT_INV_WIDTH                1  /* AIF2ADCL_DAT_INV */
-#define WM8994_AIF2ADCR_DAT_INV                 0x0001  /* AIF2ADCR_DAT_INV */
-#define WM8994_AIF2ADCR_DAT_INV_MASK            0x0001  /* AIF2ADCR_DAT_INV */
-#define WM8994_AIF2ADCR_DAT_INV_SHIFT                0  /* AIF2ADCR_DAT_INV */
-#define WM8994_AIF2ADCR_DAT_INV_WIDTH                1  /* AIF2ADCR_DAT_INV */
-
-/*
- * R800 (0x320) - AIF3 Control (1)
- */
-#define WM8958_AIF3_LRCLK_INV                   0x0080  /* AIF3_LRCLK_INV */
-#define WM8958_AIF3_LRCLK_INV_MASK              0x0080  /* AIF3_LRCLK_INV */
-#define WM8958_AIF3_LRCLK_INV_SHIFT                  7  /* AIF3_LRCLK_INV */
-#define WM8958_AIF3_LRCLK_INV_WIDTH                  1  /* AIF3_LRCLK_INV */
-#define WM8958_AIF3_WL_MASK                     0x0060  /* AIF3_WL - [6:5] */
-#define WM8958_AIF3_WL_SHIFT                         5  /* AIF3_WL - [6:5] */
-#define WM8958_AIF3_WL_WIDTH                         2  /* AIF3_WL - [6:5] */
-#define WM8958_AIF3_FMT_MASK                    0x0018  /* AIF3_FMT - [4:3] */
-#define WM8958_AIF3_FMT_SHIFT                        3  /* AIF3_FMT - [4:3] */
-#define WM8958_AIF3_FMT_WIDTH                        2  /* AIF3_FMT - [4:3] */
-
-/*
- * R801 (0x321) - AIF3 Control (2)
- */
-#define WM8958_AIF3DAC_BOOST_MASK               0x0C00  /* AIF3DAC_BOOST - [11:10] */
-#define WM8958_AIF3DAC_BOOST_SHIFT                  10  /* AIF3DAC_BOOST - [11:10] */
-#define WM8958_AIF3DAC_BOOST_WIDTH                   2  /* AIF3DAC_BOOST - [11:10] */
-#define WM8958_AIF3DAC_COMP                     0x0010  /* AIF3DAC_COMP */
-#define WM8958_AIF3DAC_COMP_MASK                0x0010  /* AIF3DAC_COMP */
-#define WM8958_AIF3DAC_COMP_SHIFT                    4  /* AIF3DAC_COMP */
-#define WM8958_AIF3DAC_COMP_WIDTH                    1  /* AIF3DAC_COMP */
-#define WM8958_AIF3DAC_COMPMODE                 0x0008  /* AIF3DAC_COMPMODE */
-#define WM8958_AIF3DAC_COMPMODE_MASK            0x0008  /* AIF3DAC_COMPMODE */
-#define WM8958_AIF3DAC_COMPMODE_SHIFT                3  /* AIF3DAC_COMPMODE */
-#define WM8958_AIF3DAC_COMPMODE_WIDTH                1  /* AIF3DAC_COMPMODE */
-#define WM8958_AIF3ADC_COMP                     0x0004  /* AIF3ADC_COMP */
-#define WM8958_AIF3ADC_COMP_MASK                0x0004  /* AIF3ADC_COMP */
-#define WM8958_AIF3ADC_COMP_SHIFT                    2  /* AIF3ADC_COMP */
-#define WM8958_AIF3ADC_COMP_WIDTH                    1  /* AIF3ADC_COMP */
-#define WM8958_AIF3ADC_COMPMODE                 0x0002  /* AIF3ADC_COMPMODE */
-#define WM8958_AIF3ADC_COMPMODE_MASK            0x0002  /* AIF3ADC_COMPMODE */
-#define WM8958_AIF3ADC_COMPMODE_SHIFT                1  /* AIF3ADC_COMPMODE */
-#define WM8958_AIF3ADC_COMPMODE_WIDTH                1  /* AIF3ADC_COMPMODE */
-#define WM8958_AIF3_LOOPBACK                    0x0001  /* AIF3_LOOPBACK */
-#define WM8958_AIF3_LOOPBACK_MASK               0x0001  /* AIF3_LOOPBACK */
-#define WM8958_AIF3_LOOPBACK_SHIFT                   0  /* AIF3_LOOPBACK */
-#define WM8958_AIF3_LOOPBACK_WIDTH                   1  /* AIF3_LOOPBACK */
-
-/*
- * R802 (0x322) - AIF3DAC Data
- */
-#define WM8958_AIF3DAC_DAT_INV                  0x0001  /* AIF3DAC_DAT_INV */
-#define WM8958_AIF3DAC_DAT_INV_MASK             0x0001  /* AIF3DAC_DAT_INV */
-#define WM8958_AIF3DAC_DAT_INV_SHIFT                 0  /* AIF3DAC_DAT_INV */
-#define WM8958_AIF3DAC_DAT_INV_WIDTH                 1  /* AIF3DAC_DAT_INV */
-
-/*
- * R803 (0x323) - AIF3ADC Data
- */
-#define WM8958_AIF3ADC_DAT_INV                  0x0001  /* AIF3ADC_DAT_INV */
-#define WM8958_AIF3ADC_DAT_INV_MASK             0x0001  /* AIF3ADC_DAT_INV */
-#define WM8958_AIF3ADC_DAT_INV_SHIFT                 0  /* AIF3ADC_DAT_INV */
-#define WM8958_AIF3ADC_DAT_INV_WIDTH                 1  /* AIF3ADC_DAT_INV */
-
-/*
- * R1024 (0x400) - AIF1 ADC1 Left Volume
- */
-#define WM8994_AIF1ADC1_VU                      0x0100  /* AIF1ADC1_VU */
-#define WM8994_AIF1ADC1_VU_MASK                 0x0100  /* AIF1ADC1_VU */
-#define WM8994_AIF1ADC1_VU_SHIFT                     8  /* AIF1ADC1_VU */
-#define WM8994_AIF1ADC1_VU_WIDTH                     1  /* AIF1ADC1_VU */
-#define WM8994_AIF1ADC1L_VOL_MASK               0x00FF  /* AIF1ADC1L_VOL - [7:0] */
-#define WM8994_AIF1ADC1L_VOL_SHIFT                   0  /* AIF1ADC1L_VOL - [7:0] */
-#define WM8994_AIF1ADC1L_VOL_WIDTH                   8  /* AIF1ADC1L_VOL - [7:0] */
-
-/*
- * R1025 (0x401) - AIF1 ADC1 Right Volume
- */
-#define WM8994_AIF1ADC1_VU                      0x0100  /* AIF1ADC1_VU */
-#define WM8994_AIF1ADC1_VU_MASK                 0x0100  /* AIF1ADC1_VU */
-#define WM8994_AIF1ADC1_VU_SHIFT                     8  /* AIF1ADC1_VU */
-#define WM8994_AIF1ADC1_VU_WIDTH                     1  /* AIF1ADC1_VU */
-#define WM8994_AIF1ADC1R_VOL_MASK               0x00FF  /* AIF1ADC1R_VOL - [7:0] */
-#define WM8994_AIF1ADC1R_VOL_SHIFT                   0  /* AIF1ADC1R_VOL - [7:0] */
-#define WM8994_AIF1ADC1R_VOL_WIDTH                   8  /* AIF1ADC1R_VOL - [7:0] */
-
-/*
- * R1026 (0x402) - AIF1 DAC1 Left Volume
- */
-#define WM8994_AIF1DAC1_VU                      0x0100  /* AIF1DAC1_VU */
-#define WM8994_AIF1DAC1_VU_MASK                 0x0100  /* AIF1DAC1_VU */
-#define WM8994_AIF1DAC1_VU_SHIFT                     8  /* AIF1DAC1_VU */
-#define WM8994_AIF1DAC1_VU_WIDTH                     1  /* AIF1DAC1_VU */
-#define WM8994_AIF1DAC1L_VOL_MASK               0x00FF  /* AIF1DAC1L_VOL - [7:0] */
-#define WM8994_AIF1DAC1L_VOL_SHIFT                   0  /* AIF1DAC1L_VOL - [7:0] */
-#define WM8994_AIF1DAC1L_VOL_WIDTH                   8  /* AIF1DAC1L_VOL - [7:0] */
-
-/*
- * R1027 (0x403) - AIF1 DAC1 Right Volume
- */
-#define WM8994_AIF1DAC1_VU                      0x0100  /* AIF1DAC1_VU */
-#define WM8994_AIF1DAC1_VU_MASK                 0x0100  /* AIF1DAC1_VU */
-#define WM8994_AIF1DAC1_VU_SHIFT                     8  /* AIF1DAC1_VU */
-#define WM8994_AIF1DAC1_VU_WIDTH                     1  /* AIF1DAC1_VU */
-#define WM8994_AIF1DAC1R_VOL_MASK               0x00FF  /* AIF1DAC1R_VOL - [7:0] */
-#define WM8994_AIF1DAC1R_VOL_SHIFT                   0  /* AIF1DAC1R_VOL - [7:0] */
-#define WM8994_AIF1DAC1R_VOL_WIDTH                   8  /* AIF1DAC1R_VOL - [7:0] */
-
-/*
- * R1028 (0x404) - AIF1 ADC2 Left Volume
- */
-#define WM8994_AIF1ADC2_VU                      0x0100  /* AIF1ADC2_VU */
-#define WM8994_AIF1ADC2_VU_MASK                 0x0100  /* AIF1ADC2_VU */
-#define WM8994_AIF1ADC2_VU_SHIFT                     8  /* AIF1ADC2_VU */
-#define WM8994_AIF1ADC2_VU_WIDTH                     1  /* AIF1ADC2_VU */
-#define WM8994_AIF1ADC2L_VOL_MASK               0x00FF  /* AIF1ADC2L_VOL - [7:0] */
-#define WM8994_AIF1ADC2L_VOL_SHIFT                   0  /* AIF1ADC2L_VOL - [7:0] */
-#define WM8994_AIF1ADC2L_VOL_WIDTH                   8  /* AIF1ADC2L_VOL - [7:0] */
-
-/*
- * R1029 (0x405) - AIF1 ADC2 Right Volume
- */
-#define WM8994_AIF1ADC2_VU                      0x0100  /* AIF1ADC2_VU */
-#define WM8994_AIF1ADC2_VU_MASK                 0x0100  /* AIF1ADC2_VU */
-#define WM8994_AIF1ADC2_VU_SHIFT                     8  /* AIF1ADC2_VU */
-#define WM8994_AIF1ADC2_VU_WIDTH                     1  /* AIF1ADC2_VU */
-#define WM8994_AIF1ADC2R_VOL_MASK               0x00FF  /* AIF1ADC2R_VOL - [7:0] */
-#define WM8994_AIF1ADC2R_VOL_SHIFT                   0  /* AIF1ADC2R_VOL - [7:0] */
-#define WM8994_AIF1ADC2R_VOL_WIDTH                   8  /* AIF1ADC2R_VOL - [7:0] */
-
-/*
- * R1030 (0x406) - AIF1 DAC2 Left Volume
- */
-#define WM8994_AIF1DAC2_VU                      0x0100  /* AIF1DAC2_VU */
-#define WM8994_AIF1DAC2_VU_MASK                 0x0100  /* AIF1DAC2_VU */
-#define WM8994_AIF1DAC2_VU_SHIFT                     8  /* AIF1DAC2_VU */
-#define WM8994_AIF1DAC2_VU_WIDTH                     1  /* AIF1DAC2_VU */
-#define WM8994_AIF1DAC2L_VOL_MASK               0x00FF  /* AIF1DAC2L_VOL - [7:0] */
-#define WM8994_AIF1DAC2L_VOL_SHIFT                   0  /* AIF1DAC2L_VOL - [7:0] */
-#define WM8994_AIF1DAC2L_VOL_WIDTH                   8  /* AIF1DAC2L_VOL - [7:0] */
-
-/*
- * R1031 (0x407) - AIF1 DAC2 Right Volume
- */
-#define WM8994_AIF1DAC2_VU                      0x0100  /* AIF1DAC2_VU */
-#define WM8994_AIF1DAC2_VU_MASK                 0x0100  /* AIF1DAC2_VU */
-#define WM8994_AIF1DAC2_VU_SHIFT                     8  /* AIF1DAC2_VU */
-#define WM8994_AIF1DAC2_VU_WIDTH                     1  /* AIF1DAC2_VU */
-#define WM8994_AIF1DAC2R_VOL_MASK               0x00FF  /* AIF1DAC2R_VOL - [7:0] */
-#define WM8994_AIF1DAC2R_VOL_SHIFT                   0  /* AIF1DAC2R_VOL - [7:0] */
-#define WM8994_AIF1DAC2R_VOL_WIDTH                   8  /* AIF1DAC2R_VOL - [7:0] */
-
-/*
- * R1040 (0x410) - AIF1 ADC1 Filters
- */
-#define WM8994_AIF1ADC_4FS                      0x8000  /* AIF1ADC_4FS */
-#define WM8994_AIF1ADC_4FS_MASK                 0x8000  /* AIF1ADC_4FS */
-#define WM8994_AIF1ADC_4FS_SHIFT                    15  /* AIF1ADC_4FS */
-#define WM8994_AIF1ADC_4FS_WIDTH                     1  /* AIF1ADC_4FS */
-#define WM8994_AIF1ADC1_HPF_CUT_MASK            0x6000  /* AIF1ADC1_HPF_CUT - [14:13] */
-#define WM8994_AIF1ADC1_HPF_CUT_SHIFT               13  /* AIF1ADC1_HPF_CUT - [14:13] */
-#define WM8994_AIF1ADC1_HPF_CUT_WIDTH                2  /* AIF1ADC1_HPF_CUT - [14:13] */
-#define WM8994_AIF1ADC1L_HPF                    0x1000  /* AIF1ADC1L_HPF */
-#define WM8994_AIF1ADC1L_HPF_MASK               0x1000  /* AIF1ADC1L_HPF */
-#define WM8994_AIF1ADC1L_HPF_SHIFT                  12  /* AIF1ADC1L_HPF */
-#define WM8994_AIF1ADC1L_HPF_WIDTH                   1  /* AIF1ADC1L_HPF */
-#define WM8994_AIF1ADC1R_HPF                    0x0800  /* AIF1ADC1R_HPF */
-#define WM8994_AIF1ADC1R_HPF_MASK               0x0800  /* AIF1ADC1R_HPF */
-#define WM8994_AIF1ADC1R_HPF_SHIFT                  11  /* AIF1ADC1R_HPF */
-#define WM8994_AIF1ADC1R_HPF_WIDTH                   1  /* AIF1ADC1R_HPF */
-
-/*
- * R1041 (0x411) - AIF1 ADC2 Filters
- */
-#define WM8994_AIF1ADC2_HPF_CUT_MASK            0x6000  /* AIF1ADC2_HPF_CUT - [14:13] */
-#define WM8994_AIF1ADC2_HPF_CUT_SHIFT               13  /* AIF1ADC2_HPF_CUT - [14:13] */
-#define WM8994_AIF1ADC2_HPF_CUT_WIDTH                2  /* AIF1ADC2_HPF_CUT - [14:13] */
-#define WM8994_AIF1ADC2L_HPF                    0x1000  /* AIF1ADC2L_HPF */
-#define WM8994_AIF1ADC2L_HPF_MASK               0x1000  /* AIF1ADC2L_HPF */
-#define WM8994_AIF1ADC2L_HPF_SHIFT                  12  /* AIF1ADC2L_HPF */
-#define WM8994_AIF1ADC2L_HPF_WIDTH                   1  /* AIF1ADC2L_HPF */
-#define WM8994_AIF1ADC2R_HPF                    0x0800  /* AIF1ADC2R_HPF */
-#define WM8994_AIF1ADC2R_HPF_MASK               0x0800  /* AIF1ADC2R_HPF */
-#define WM8994_AIF1ADC2R_HPF_SHIFT                  11  /* AIF1ADC2R_HPF */
-#define WM8994_AIF1ADC2R_HPF_WIDTH                   1  /* AIF1ADC2R_HPF */
-
-/*
- * R1056 (0x420) - AIF1 DAC1 Filters (1)
- */
-#define WM8994_AIF1DAC1_MUTE                    0x0200  /* AIF1DAC1_MUTE */
-#define WM8994_AIF1DAC1_MUTE_MASK               0x0200  /* AIF1DAC1_MUTE */
-#define WM8994_AIF1DAC1_MUTE_SHIFT                   9  /* AIF1DAC1_MUTE */
-#define WM8994_AIF1DAC1_MUTE_WIDTH                   1  /* AIF1DAC1_MUTE */
-#define WM8994_AIF1DAC1_MONO                    0x0080  /* AIF1DAC1_MONO */
-#define WM8994_AIF1DAC1_MONO_MASK               0x0080  /* AIF1DAC1_MONO */
-#define WM8994_AIF1DAC1_MONO_SHIFT                   7  /* AIF1DAC1_MONO */
-#define WM8994_AIF1DAC1_MONO_WIDTH                   1  /* AIF1DAC1_MONO */
-#define WM8994_AIF1DAC1_MUTERATE                0x0020  /* AIF1DAC1_MUTERATE */
-#define WM8994_AIF1DAC1_MUTERATE_MASK           0x0020  /* AIF1DAC1_MUTERATE */
-#define WM8994_AIF1DAC1_MUTERATE_SHIFT               5  /* AIF1DAC1_MUTERATE */
-#define WM8994_AIF1DAC1_MUTERATE_WIDTH               1  /* AIF1DAC1_MUTERATE */
-#define WM8994_AIF1DAC1_UNMUTE_RAMP             0x0010  /* AIF1DAC1_UNMUTE_RAMP */
-#define WM8994_AIF1DAC1_UNMUTE_RAMP_MASK        0x0010  /* AIF1DAC1_UNMUTE_RAMP */
-#define WM8994_AIF1DAC1_UNMUTE_RAMP_SHIFT            4  /* AIF1DAC1_UNMUTE_RAMP */
-#define WM8994_AIF1DAC1_UNMUTE_RAMP_WIDTH            1  /* AIF1DAC1_UNMUTE_RAMP */
-#define WM8994_AIF1DAC1_DEEMP_MASK              0x0006  /* AIF1DAC1_DEEMP - [2:1] */
-#define WM8994_AIF1DAC1_DEEMP_SHIFT                  1  /* AIF1DAC1_DEEMP - [2:1] */
-#define WM8994_AIF1DAC1_DEEMP_WIDTH                  2  /* AIF1DAC1_DEEMP - [2:1] */
-
-/*
- * R1057 (0x421) - AIF1 DAC1 Filters (2)
- */
-#define WM8994_AIF1DAC1_3D_GAIN_MASK            0x3E00  /* AIF1DAC1_3D_GAIN - [13:9] */
-#define WM8994_AIF1DAC1_3D_GAIN_SHIFT                9  /* AIF1DAC1_3D_GAIN - [13:9] */
-#define WM8994_AIF1DAC1_3D_GAIN_WIDTH                5  /* AIF1DAC1_3D_GAIN - [13:9] */
-#define WM8994_AIF1DAC1_3D_ENA                  0x0100  /* AIF1DAC1_3D_ENA */
-#define WM8994_AIF1DAC1_3D_ENA_MASK             0x0100  /* AIF1DAC1_3D_ENA */
-#define WM8994_AIF1DAC1_3D_ENA_SHIFT                 8  /* AIF1DAC1_3D_ENA */
-#define WM8994_AIF1DAC1_3D_ENA_WIDTH                 1  /* AIF1DAC1_3D_ENA */
-
-/*
- * R1058 (0x422) - AIF1 DAC2 Filters (1)
- */
-#define WM8994_AIF1DAC2_MUTE                    0x0200  /* AIF1DAC2_MUTE */
-#define WM8994_AIF1DAC2_MUTE_MASK               0x0200  /* AIF1DAC2_MUTE */
-#define WM8994_AIF1DAC2_MUTE_SHIFT                   9  /* AIF1DAC2_MUTE */
-#define WM8994_AIF1DAC2_MUTE_WIDTH                   1  /* AIF1DAC2_MUTE */
-#define WM8994_AIF1DAC2_MONO                    0x0080  /* AIF1DAC2_MONO */
-#define WM8994_AIF1DAC2_MONO_MASK               0x0080  /* AIF1DAC2_MONO */
-#define WM8994_AIF1DAC2_MONO_SHIFT                   7  /* AIF1DAC2_MONO */
-#define WM8994_AIF1DAC2_MONO_WIDTH                   1  /* AIF1DAC2_MONO */
-#define WM8994_AIF1DAC2_MUTERATE                0x0020  /* AIF1DAC2_MUTERATE */
-#define WM8994_AIF1DAC2_MUTERATE_MASK           0x0020  /* AIF1DAC2_MUTERATE */
-#define WM8994_AIF1DAC2_MUTERATE_SHIFT               5  /* AIF1DAC2_MUTERATE */
-#define WM8994_AIF1DAC2_MUTERATE_WIDTH               1  /* AIF1DAC2_MUTERATE */
-#define WM8994_AIF1DAC2_UNMUTE_RAMP             0x0010  /* AIF1DAC2_UNMUTE_RAMP */
-#define WM8994_AIF1DAC2_UNMUTE_RAMP_MASK        0x0010  /* AIF1DAC2_UNMUTE_RAMP */
-#define WM8994_AIF1DAC2_UNMUTE_RAMP_SHIFT            4  /* AIF1DAC2_UNMUTE_RAMP */
-#define WM8994_AIF1DAC2_UNMUTE_RAMP_WIDTH            1  /* AIF1DAC2_UNMUTE_RAMP */
-#define WM8994_AIF1DAC2_DEEMP_MASK              0x0006  /* AIF1DAC2_DEEMP - [2:1] */
-#define WM8994_AIF1DAC2_DEEMP_SHIFT                  1  /* AIF1DAC2_DEEMP - [2:1] */
-#define WM8994_AIF1DAC2_DEEMP_WIDTH                  2  /* AIF1DAC2_DEEMP - [2:1] */
-
-/*
- * R1059 (0x423) - AIF1 DAC2 Filters (2)
- */
-#define WM8994_AIF1DAC2_3D_GAIN_MASK            0x3E00  /* AIF1DAC2_3D_GAIN - [13:9] */
-#define WM8994_AIF1DAC2_3D_GAIN_SHIFT                9  /* AIF1DAC2_3D_GAIN - [13:9] */
-#define WM8994_AIF1DAC2_3D_GAIN_WIDTH                5  /* AIF1DAC2_3D_GAIN - [13:9] */
-#define WM8994_AIF1DAC2_3D_ENA                  0x0100  /* AIF1DAC2_3D_ENA */
-#define WM8994_AIF1DAC2_3D_ENA_MASK             0x0100  /* AIF1DAC2_3D_ENA */
-#define WM8994_AIF1DAC2_3D_ENA_SHIFT                 8  /* AIF1DAC2_3D_ENA */
-#define WM8994_AIF1DAC2_3D_ENA_WIDTH                 1  /* AIF1DAC2_3D_ENA */
-
-/*
- * R1072 (0x430) - AIF1 DAC1 Noise Gate
- */
-#define WM8958_AIF1DAC1_NG_HLD_MASK             0x0060  /* AIF1DAC1_NG_HLD - [6:5] */
-#define WM8958_AIF1DAC1_NG_HLD_SHIFT                 5  /* AIF1DAC1_NG_HLD - [6:5] */
-#define WM8958_AIF1DAC1_NG_HLD_WIDTH                 2  /* AIF1DAC1_NG_HLD - [6:5] */
-#define WM8958_AIF1DAC1_NG_THR_MASK             0x000E  /* AIF1DAC1_NG_THR - [3:1] */
-#define WM8958_AIF1DAC1_NG_THR_SHIFT                 1  /* AIF1DAC1_NG_THR - [3:1] */
-#define WM8958_AIF1DAC1_NG_THR_WIDTH                 3  /* AIF1DAC1_NG_THR - [3:1] */
-#define WM8958_AIF1DAC1_NG_ENA                  0x0001  /* AIF1DAC1_NG_ENA */
-#define WM8958_AIF1DAC1_NG_ENA_MASK             0x0001  /* AIF1DAC1_NG_ENA */
-#define WM8958_AIF1DAC1_NG_ENA_SHIFT                 0  /* AIF1DAC1_NG_ENA */
-#define WM8958_AIF1DAC1_NG_ENA_WIDTH                 1  /* AIF1DAC1_NG_ENA */
-
-/*
- * R1073 (0x431) - AIF1 DAC2 Noise Gate
- */
-#define WM8958_AIF1DAC2_NG_HLD_MASK             0x0060  /* AIF1DAC2_NG_HLD - [6:5] */
-#define WM8958_AIF1DAC2_NG_HLD_SHIFT                 5  /* AIF1DAC2_NG_HLD - [6:5] */
-#define WM8958_AIF1DAC2_NG_HLD_WIDTH                 2  /* AIF1DAC2_NG_HLD - [6:5] */
-#define WM8958_AIF1DAC2_NG_THR_MASK             0x000E  /* AIF1DAC2_NG_THR - [3:1] */
-#define WM8958_AIF1DAC2_NG_THR_SHIFT                 1  /* AIF1DAC2_NG_THR - [3:1] */
-#define WM8958_AIF1DAC2_NG_THR_WIDTH                 3  /* AIF1DAC2_NG_THR - [3:1] */
-#define WM8958_AIF1DAC2_NG_ENA                  0x0001  /* AIF1DAC2_NG_ENA */
-#define WM8958_AIF1DAC2_NG_ENA_MASK             0x0001  /* AIF1DAC2_NG_ENA */
-#define WM8958_AIF1DAC2_NG_ENA_SHIFT                 0  /* AIF1DAC2_NG_ENA */
-#define WM8958_AIF1DAC2_NG_ENA_WIDTH                 1  /* AIF1DAC2_NG_ENA */
-
-/*
- * R1088 (0x440) - AIF1 DRC1 (1)
- */
-#define WM8994_AIF1DRC1_SIG_DET_RMS_MASK        0xF800  /* AIF1DRC1_SIG_DET_RMS - [15:11] */
-#define WM8994_AIF1DRC1_SIG_DET_RMS_SHIFT           11  /* AIF1DRC1_SIG_DET_RMS - [15:11] */
-#define WM8994_AIF1DRC1_SIG_DET_RMS_WIDTH            5  /* AIF1DRC1_SIG_DET_RMS - [15:11] */
-#define WM8994_AIF1DRC1_SIG_DET_PK_MASK         0x0600  /* AIF1DRC1_SIG_DET_PK - [10:9] */
-#define WM8994_AIF1DRC1_SIG_DET_PK_SHIFT             9  /* AIF1DRC1_SIG_DET_PK - [10:9] */
-#define WM8994_AIF1DRC1_SIG_DET_PK_WIDTH             2  /* AIF1DRC1_SIG_DET_PK - [10:9] */
-#define WM8994_AIF1DRC1_NG_ENA                  0x0100  /* AIF1DRC1_NG_ENA */
-#define WM8994_AIF1DRC1_NG_ENA_MASK             0x0100  /* AIF1DRC1_NG_ENA */
-#define WM8994_AIF1DRC1_NG_ENA_SHIFT                 8  /* AIF1DRC1_NG_ENA */
-#define WM8994_AIF1DRC1_NG_ENA_WIDTH                 1  /* AIF1DRC1_NG_ENA */
-#define WM8994_AIF1DRC1_SIG_DET_MODE            0x0080  /* AIF1DRC1_SIG_DET_MODE */
-#define WM8994_AIF1DRC1_SIG_DET_MODE_MASK       0x0080  /* AIF1DRC1_SIG_DET_MODE */
-#define WM8994_AIF1DRC1_SIG_DET_MODE_SHIFT           7  /* AIF1DRC1_SIG_DET_MODE */
-#define WM8994_AIF1DRC1_SIG_DET_MODE_WIDTH           1  /* AIF1DRC1_SIG_DET_MODE */
-#define WM8994_AIF1DRC1_SIG_DET                 0x0040  /* AIF1DRC1_SIG_DET */
-#define WM8994_AIF1DRC1_SIG_DET_MASK            0x0040  /* AIF1DRC1_SIG_DET */
-#define WM8994_AIF1DRC1_SIG_DET_SHIFT                6  /* AIF1DRC1_SIG_DET */
-#define WM8994_AIF1DRC1_SIG_DET_WIDTH                1  /* AIF1DRC1_SIG_DET */
-#define WM8994_AIF1DRC1_KNEE2_OP_ENA            0x0020  /* AIF1DRC1_KNEE2_OP_ENA */
-#define WM8994_AIF1DRC1_KNEE2_OP_ENA_MASK       0x0020  /* AIF1DRC1_KNEE2_OP_ENA */
-#define WM8994_AIF1DRC1_KNEE2_OP_ENA_SHIFT           5  /* AIF1DRC1_KNEE2_OP_ENA */
-#define WM8994_AIF1DRC1_KNEE2_OP_ENA_WIDTH           1  /* AIF1DRC1_KNEE2_OP_ENA */
-#define WM8994_AIF1DRC1_QR                      0x0010  /* AIF1DRC1_QR */
-#define WM8994_AIF1DRC1_QR_MASK                 0x0010  /* AIF1DRC1_QR */
-#define WM8994_AIF1DRC1_QR_SHIFT                     4  /* AIF1DRC1_QR */
-#define WM8994_AIF1DRC1_QR_WIDTH                     1  /* AIF1DRC1_QR */
-#define WM8994_AIF1DRC1_ANTICLIP                0x0008  /* AIF1DRC1_ANTICLIP */
-#define WM8994_AIF1DRC1_ANTICLIP_MASK           0x0008  /* AIF1DRC1_ANTICLIP */
-#define WM8994_AIF1DRC1_ANTICLIP_SHIFT               3  /* AIF1DRC1_ANTICLIP */
-#define WM8994_AIF1DRC1_ANTICLIP_WIDTH               1  /* AIF1DRC1_ANTICLIP */
-#define WM8994_AIF1DAC1_DRC_ENA                 0x0004  /* AIF1DAC1_DRC_ENA */
-#define WM8994_AIF1DAC1_DRC_ENA_MASK            0x0004  /* AIF1DAC1_DRC_ENA */
-#define WM8994_AIF1DAC1_DRC_ENA_SHIFT                2  /* AIF1DAC1_DRC_ENA */
-#define WM8994_AIF1DAC1_DRC_ENA_WIDTH                1  /* AIF1DAC1_DRC_ENA */
-#define WM8994_AIF1ADC1L_DRC_ENA                0x0002  /* AIF1ADC1L_DRC_ENA */
-#define WM8994_AIF1ADC1L_DRC_ENA_MASK           0x0002  /* AIF1ADC1L_DRC_ENA */
-#define WM8994_AIF1ADC1L_DRC_ENA_SHIFT               1  /* AIF1ADC1L_DRC_ENA */
-#define WM8994_AIF1ADC1L_DRC_ENA_WIDTH               1  /* AIF1ADC1L_DRC_ENA */
-#define WM8994_AIF1ADC1R_DRC_ENA                0x0001  /* AIF1ADC1R_DRC_ENA */
-#define WM8994_AIF1ADC1R_DRC_ENA_MASK           0x0001  /* AIF1ADC1R_DRC_ENA */
-#define WM8994_AIF1ADC1R_DRC_ENA_SHIFT               0  /* AIF1ADC1R_DRC_ENA */
-#define WM8994_AIF1ADC1R_DRC_ENA_WIDTH               1  /* AIF1ADC1R_DRC_ENA */
-
-/*
- * R1089 (0x441) - AIF1 DRC1 (2)
- */
-#define WM8994_AIF1DRC1_ATK_MASK                0x1E00  /* AIF1DRC1_ATK - [12:9] */
-#define WM8994_AIF1DRC1_ATK_SHIFT                    9  /* AIF1DRC1_ATK - [12:9] */
-#define WM8994_AIF1DRC1_ATK_WIDTH                    4  /* AIF1DRC1_ATK - [12:9] */
-#define WM8994_AIF1DRC1_DCY_MASK                0x01E0  /* AIF1DRC1_DCY - [8:5] */
-#define WM8994_AIF1DRC1_DCY_SHIFT                    5  /* AIF1DRC1_DCY - [8:5] */
-#define WM8994_AIF1DRC1_DCY_WIDTH                    4  /* AIF1DRC1_DCY - [8:5] */
-#define WM8994_AIF1DRC1_MINGAIN_MASK            0x001C  /* AIF1DRC1_MINGAIN - [4:2] */
-#define WM8994_AIF1DRC1_MINGAIN_SHIFT                2  /* AIF1DRC1_MINGAIN - [4:2] */
-#define WM8994_AIF1DRC1_MINGAIN_WIDTH                3  /* AIF1DRC1_MINGAIN - [4:2] */
-#define WM8994_AIF1DRC1_MAXGAIN_MASK            0x0003  /* AIF1DRC1_MAXGAIN - [1:0] */
-#define WM8994_AIF1DRC1_MAXGAIN_SHIFT                0  /* AIF1DRC1_MAXGAIN - [1:0] */
-#define WM8994_AIF1DRC1_MAXGAIN_WIDTH                2  /* AIF1DRC1_MAXGAIN - [1:0] */
-
-/*
- * R1090 (0x442) - AIF1 DRC1 (3)
- */
-#define WM8994_AIF1DRC1_NG_MINGAIN_MASK         0xF000  /* AIF1DRC1_NG_MINGAIN - [15:12] */
-#define WM8994_AIF1DRC1_NG_MINGAIN_SHIFT            12  /* AIF1DRC1_NG_MINGAIN - [15:12] */
-#define WM8994_AIF1DRC1_NG_MINGAIN_WIDTH             4  /* AIF1DRC1_NG_MINGAIN - [15:12] */
-#define WM8994_AIF1DRC1_NG_EXP_MASK             0x0C00  /* AIF1DRC1_NG_EXP - [11:10] */
-#define WM8994_AIF1DRC1_NG_EXP_SHIFT                10  /* AIF1DRC1_NG_EXP - [11:10] */
-#define WM8994_AIF1DRC1_NG_EXP_WIDTH                 2  /* AIF1DRC1_NG_EXP - [11:10] */
-#define WM8994_AIF1DRC1_QR_THR_MASK             0x0300  /* AIF1DRC1_QR_THR - [9:8] */
-#define WM8994_AIF1DRC1_QR_THR_SHIFT                 8  /* AIF1DRC1_QR_THR - [9:8] */
-#define WM8994_AIF1DRC1_QR_THR_WIDTH                 2  /* AIF1DRC1_QR_THR - [9:8] */
-#define WM8994_AIF1DRC1_QR_DCY_MASK             0x00C0  /* AIF1DRC1_QR_DCY - [7:6] */
-#define WM8994_AIF1DRC1_QR_DCY_SHIFT                 6  /* AIF1DRC1_QR_DCY - [7:6] */
-#define WM8994_AIF1DRC1_QR_DCY_WIDTH                 2  /* AIF1DRC1_QR_DCY - [7:6] */
-#define WM8994_AIF1DRC1_HI_COMP_MASK            0x0038  /* AIF1DRC1_HI_COMP - [5:3] */
-#define WM8994_AIF1DRC1_HI_COMP_SHIFT                3  /* AIF1DRC1_HI_COMP - [5:3] */
-#define WM8994_AIF1DRC1_HI_COMP_WIDTH                3  /* AIF1DRC1_HI_COMP - [5:3] */
-#define WM8994_AIF1DRC1_LO_COMP_MASK            0x0007  /* AIF1DRC1_LO_COMP - [2:0] */
-#define WM8994_AIF1DRC1_LO_COMP_SHIFT                0  /* AIF1DRC1_LO_COMP - [2:0] */
-#define WM8994_AIF1DRC1_LO_COMP_WIDTH                3  /* AIF1DRC1_LO_COMP - [2:0] */
-
-/*
- * R1091 (0x443) - AIF1 DRC1 (4)
- */
-#define WM8994_AIF1DRC1_KNEE_IP_MASK            0x07E0  /* AIF1DRC1_KNEE_IP - [10:5] */
-#define WM8994_AIF1DRC1_KNEE_IP_SHIFT                5  /* AIF1DRC1_KNEE_IP - [10:5] */
-#define WM8994_AIF1DRC1_KNEE_IP_WIDTH                6  /* AIF1DRC1_KNEE_IP - [10:5] */
-#define WM8994_AIF1DRC1_KNEE_OP_MASK            0x001F  /* AIF1DRC1_KNEE_OP - [4:0] */
-#define WM8994_AIF1DRC1_KNEE_OP_SHIFT                0  /* AIF1DRC1_KNEE_OP - [4:0] */
-#define WM8994_AIF1DRC1_KNEE_OP_WIDTH                5  /* AIF1DRC1_KNEE_OP - [4:0] */
-
-/*
- * R1092 (0x444) - AIF1 DRC1 (5)
- */
-#define WM8994_AIF1DRC1_KNEE2_IP_MASK           0x03E0  /* AIF1DRC1_KNEE2_IP - [9:5] */
-#define WM8994_AIF1DRC1_KNEE2_IP_SHIFT               5  /* AIF1DRC1_KNEE2_IP - [9:5] */
-#define WM8994_AIF1DRC1_KNEE2_IP_WIDTH               5  /* AIF1DRC1_KNEE2_IP - [9:5] */
-#define WM8994_AIF1DRC1_KNEE2_OP_MASK           0x001F  /* AIF1DRC1_KNEE2_OP - [4:0] */
-#define WM8994_AIF1DRC1_KNEE2_OP_SHIFT               0  /* AIF1DRC1_KNEE2_OP - [4:0] */
-#define WM8994_AIF1DRC1_KNEE2_OP_WIDTH               5  /* AIF1DRC1_KNEE2_OP - [4:0] */
-
-/*
- * R1104 (0x450) - AIF1 DRC2 (1)
- */
-#define WM8994_AIF1DRC2_SIG_DET_RMS_MASK        0xF800  /* AIF1DRC2_SIG_DET_RMS - [15:11] */
-#define WM8994_AIF1DRC2_SIG_DET_RMS_SHIFT           11  /* AIF1DRC2_SIG_DET_RMS - [15:11] */
-#define WM8994_AIF1DRC2_SIG_DET_RMS_WIDTH            5  /* AIF1DRC2_SIG_DET_RMS - [15:11] */
-#define WM8994_AIF1DRC2_SIG_DET_PK_MASK         0x0600  /* AIF1DRC2_SIG_DET_PK - [10:9] */
-#define WM8994_AIF1DRC2_SIG_DET_PK_SHIFT             9  /* AIF1DRC2_SIG_DET_PK - [10:9] */
-#define WM8994_AIF1DRC2_SIG_DET_PK_WIDTH             2  /* AIF1DRC2_SIG_DET_PK - [10:9] */
-#define WM8994_AIF1DRC2_NG_ENA                  0x0100  /* AIF1DRC2_NG_ENA */
-#define WM8994_AIF1DRC2_NG_ENA_MASK             0x0100  /* AIF1DRC2_NG_ENA */
-#define WM8994_AIF1DRC2_NG_ENA_SHIFT                 8  /* AIF1DRC2_NG_ENA */
-#define WM8994_AIF1DRC2_NG_ENA_WIDTH                 1  /* AIF1DRC2_NG_ENA */
-#define WM8994_AIF1DRC2_SIG_DET_MODE            0x0080  /* AIF1DRC2_SIG_DET_MODE */
-#define WM8994_AIF1DRC2_SIG_DET_MODE_MASK       0x0080  /* AIF1DRC2_SIG_DET_MODE */
-#define WM8994_AIF1DRC2_SIG_DET_MODE_SHIFT           7  /* AIF1DRC2_SIG_DET_MODE */
-#define WM8994_AIF1DRC2_SIG_DET_MODE_WIDTH           1  /* AIF1DRC2_SIG_DET_MODE */
-#define WM8994_AIF1DRC2_SIG_DET                 0x0040  /* AIF1DRC2_SIG_DET */
-#define WM8994_AIF1DRC2_SIG_DET_MASK            0x0040  /* AIF1DRC2_SIG_DET */
-#define WM8994_AIF1DRC2_SIG_DET_SHIFT                6  /* AIF1DRC2_SIG_DET */
-#define WM8994_AIF1DRC2_SIG_DET_WIDTH                1  /* AIF1DRC2_SIG_DET */
-#define WM8994_AIF1DRC2_KNEE2_OP_ENA            0x0020  /* AIF1DRC2_KNEE2_OP_ENA */
-#define WM8994_AIF1DRC2_KNEE2_OP_ENA_MASK       0x0020  /* AIF1DRC2_KNEE2_OP_ENA */
-#define WM8994_AIF1DRC2_KNEE2_OP_ENA_SHIFT           5  /* AIF1DRC2_KNEE2_OP_ENA */
-#define WM8994_AIF1DRC2_KNEE2_OP_ENA_WIDTH           1  /* AIF1DRC2_KNEE2_OP_ENA */
-#define WM8994_AIF1DRC2_QR                      0x0010  /* AIF1DRC2_QR */
-#define WM8994_AIF1DRC2_QR_MASK                 0x0010  /* AIF1DRC2_QR */
-#define WM8994_AIF1DRC2_QR_SHIFT                     4  /* AIF1DRC2_QR */
-#define WM8994_AIF1DRC2_QR_WIDTH                     1  /* AIF1DRC2_QR */
-#define WM8994_AIF1DRC2_ANTICLIP                0x0008  /* AIF1DRC2_ANTICLIP */
-#define WM8994_AIF1DRC2_ANTICLIP_MASK           0x0008  /* AIF1DRC2_ANTICLIP */
-#define WM8994_AIF1DRC2_ANTICLIP_SHIFT               3  /* AIF1DRC2_ANTICLIP */
-#define WM8994_AIF1DRC2_ANTICLIP_WIDTH               1  /* AIF1DRC2_ANTICLIP */
-#define WM8994_AIF1DAC2_DRC_ENA                 0x0004  /* AIF1DAC2_DRC_ENA */
-#define WM8994_AIF1DAC2_DRC_ENA_MASK            0x0004  /* AIF1DAC2_DRC_ENA */
-#define WM8994_AIF1DAC2_DRC_ENA_SHIFT                2  /* AIF1DAC2_DRC_ENA */
-#define WM8994_AIF1DAC2_DRC_ENA_WIDTH                1  /* AIF1DAC2_DRC_ENA */
-#define WM8994_AIF1ADC2L_DRC_ENA                0x0002  /* AIF1ADC2L_DRC_ENA */
-#define WM8994_AIF1ADC2L_DRC_ENA_MASK           0x0002  /* AIF1ADC2L_DRC_ENA */
-#define WM8994_AIF1ADC2L_DRC_ENA_SHIFT               1  /* AIF1ADC2L_DRC_ENA */
-#define WM8994_AIF1ADC2L_DRC_ENA_WIDTH               1  /* AIF1ADC2L_DRC_ENA */
-#define WM8994_AIF1ADC2R_DRC_ENA                0x0001  /* AIF1ADC2R_DRC_ENA */
-#define WM8994_AIF1ADC2R_DRC_ENA_MASK           0x0001  /* AIF1ADC2R_DRC_ENA */
-#define WM8994_AIF1ADC2R_DRC_ENA_SHIFT               0  /* AIF1ADC2R_DRC_ENA */
-#define WM8994_AIF1ADC2R_DRC_ENA_WIDTH               1  /* AIF1ADC2R_DRC_ENA */
-
-/*
- * R1105 (0x451) - AIF1 DRC2 (2)
- */
-#define WM8994_AIF1DRC2_ATK_MASK                0x1E00  /* AIF1DRC2_ATK - [12:9] */
-#define WM8994_AIF1DRC2_ATK_SHIFT                    9  /* AIF1DRC2_ATK - [12:9] */
-#define WM8994_AIF1DRC2_ATK_WIDTH                    4  /* AIF1DRC2_ATK - [12:9] */
-#define WM8994_AIF1DRC2_DCY_MASK                0x01E0  /* AIF1DRC2_DCY - [8:5] */
-#define WM8994_AIF1DRC2_DCY_SHIFT                    5  /* AIF1DRC2_DCY - [8:5] */
-#define WM8994_AIF1DRC2_DCY_WIDTH                    4  /* AIF1DRC2_DCY - [8:5] */
-#define WM8994_AIF1DRC2_MINGAIN_MASK            0x001C  /* AIF1DRC2_MINGAIN - [4:2] */
-#define WM8994_AIF1DRC2_MINGAIN_SHIFT                2  /* AIF1DRC2_MINGAIN - [4:2] */
-#define WM8994_AIF1DRC2_MINGAIN_WIDTH                3  /* AIF1DRC2_MINGAIN - [4:2] */
-#define WM8994_AIF1DRC2_MAXGAIN_MASK            0x0003  /* AIF1DRC2_MAXGAIN - [1:0] */
-#define WM8994_AIF1DRC2_MAXGAIN_SHIFT                0  /* AIF1DRC2_MAXGAIN - [1:0] */
-#define WM8994_AIF1DRC2_MAXGAIN_WIDTH                2  /* AIF1DRC2_MAXGAIN - [1:0] */
-
-/*
- * R1106 (0x452) - AIF1 DRC2 (3)
- */
-#define WM8994_AIF1DRC2_NG_MINGAIN_MASK         0xF000  /* AIF1DRC2_NG_MINGAIN - [15:12] */
-#define WM8994_AIF1DRC2_NG_MINGAIN_SHIFT            12  /* AIF1DRC2_NG_MINGAIN - [15:12] */
-#define WM8994_AIF1DRC2_NG_MINGAIN_WIDTH             4  /* AIF1DRC2_NG_MINGAIN - [15:12] */
-#define WM8994_AIF1DRC2_NG_EXP_MASK             0x0C00  /* AIF1DRC2_NG_EXP - [11:10] */
-#define WM8994_AIF1DRC2_NG_EXP_SHIFT                10  /* AIF1DRC2_NG_EXP - [11:10] */
-#define WM8994_AIF1DRC2_NG_EXP_WIDTH                 2  /* AIF1DRC2_NG_EXP - [11:10] */
-#define WM8994_AIF1DRC2_QR_THR_MASK             0x0300  /* AIF1DRC2_QR_THR - [9:8] */
-#define WM8994_AIF1DRC2_QR_THR_SHIFT                 8  /* AIF1DRC2_QR_THR - [9:8] */
-#define WM8994_AIF1DRC2_QR_THR_WIDTH                 2  /* AIF1DRC2_QR_THR - [9:8] */
-#define WM8994_AIF1DRC2_QR_DCY_MASK             0x00C0  /* AIF1DRC2_QR_DCY - [7:6] */
-#define WM8994_AIF1DRC2_QR_DCY_SHIFT                 6  /* AIF1DRC2_QR_DCY - [7:6] */
-#define WM8994_AIF1DRC2_QR_DCY_WIDTH                 2  /* AIF1DRC2_QR_DCY - [7:6] */
-#define WM8994_AIF1DRC2_HI_COMP_MASK            0x0038  /* AIF1DRC2_HI_COMP - [5:3] */
-#define WM8994_AIF1DRC2_HI_COMP_SHIFT                3  /* AIF1DRC2_HI_COMP - [5:3] */
-#define WM8994_AIF1DRC2_HI_COMP_WIDTH                3  /* AIF1DRC2_HI_COMP - [5:3] */
-#define WM8994_AIF1DRC2_LO_COMP_MASK            0x0007  /* AIF1DRC2_LO_COMP - [2:0] */
-#define WM8994_AIF1DRC2_LO_COMP_SHIFT                0  /* AIF1DRC2_LO_COMP - [2:0] */
-#define WM8994_AIF1DRC2_LO_COMP_WIDTH                3  /* AIF1DRC2_LO_COMP - [2:0] */
-
-/*
- * R1107 (0x453) - AIF1 DRC2 (4)
- */
-#define WM8994_AIF1DRC2_KNEE_IP_MASK            0x07E0  /* AIF1DRC2_KNEE_IP - [10:5] */
-#define WM8994_AIF1DRC2_KNEE_IP_SHIFT                5  /* AIF1DRC2_KNEE_IP - [10:5] */
-#define WM8994_AIF1DRC2_KNEE_IP_WIDTH                6  /* AIF1DRC2_KNEE_IP - [10:5] */
-#define WM8994_AIF1DRC2_KNEE_OP_MASK            0x001F  /* AIF1DRC2_KNEE_OP - [4:0] */
-#define WM8994_AIF1DRC2_KNEE_OP_SHIFT                0  /* AIF1DRC2_KNEE_OP - [4:0] */
-#define WM8994_AIF1DRC2_KNEE_OP_WIDTH                5  /* AIF1DRC2_KNEE_OP - [4:0] */
-
-/*
- * R1108 (0x454) - AIF1 DRC2 (5)
- */
-#define WM8994_AIF1DRC2_KNEE2_IP_MASK           0x03E0  /* AIF1DRC2_KNEE2_IP - [9:5] */
-#define WM8994_AIF1DRC2_KNEE2_IP_SHIFT               5  /* AIF1DRC2_KNEE2_IP - [9:5] */
-#define WM8994_AIF1DRC2_KNEE2_IP_WIDTH               5  /* AIF1DRC2_KNEE2_IP - [9:5] */
-#define WM8994_AIF1DRC2_KNEE2_OP_MASK           0x001F  /* AIF1DRC2_KNEE2_OP - [4:0] */
-#define WM8994_AIF1DRC2_KNEE2_OP_SHIFT               0  /* AIF1DRC2_KNEE2_OP - [4:0] */
-#define WM8994_AIF1DRC2_KNEE2_OP_WIDTH               5  /* AIF1DRC2_KNEE2_OP - [4:0] */
-
-/*
- * R1152 (0x480) - AIF1 DAC1 EQ Gains (1)
- */
-#define WM8994_AIF1DAC1_EQ_B1_GAIN_MASK         0xF800  /* AIF1DAC1_EQ_B1_GAIN - [15:11] */
-#define WM8994_AIF1DAC1_EQ_B1_GAIN_SHIFT            11  /* AIF1DAC1_EQ_B1_GAIN - [15:11] */
-#define WM8994_AIF1DAC1_EQ_B1_GAIN_WIDTH             5  /* AIF1DAC1_EQ_B1_GAIN - [15:11] */
-#define WM8994_AIF1DAC1_EQ_B2_GAIN_MASK         0x07C0  /* AIF1DAC1_EQ_B2_GAIN - [10:6] */
-#define WM8994_AIF1DAC1_EQ_B2_GAIN_SHIFT             6  /* AIF1DAC1_EQ_B2_GAIN - [10:6] */
-#define WM8994_AIF1DAC1_EQ_B2_GAIN_WIDTH             5  /* AIF1DAC1_EQ_B2_GAIN - [10:6] */
-#define WM8994_AIF1DAC1_EQ_B3_GAIN_MASK         0x003E  /* AIF1DAC1_EQ_B3_GAIN - [5:1] */
-#define WM8994_AIF1DAC1_EQ_B3_GAIN_SHIFT             1  /* AIF1DAC1_EQ_B3_GAIN - [5:1] */
-#define WM8994_AIF1DAC1_EQ_B3_GAIN_WIDTH             5  /* AIF1DAC1_EQ_B3_GAIN - [5:1] */
-#define WM8994_AIF1DAC1_EQ_ENA                  0x0001  /* AIF1DAC1_EQ_ENA */
-#define WM8994_AIF1DAC1_EQ_ENA_MASK             0x0001  /* AIF1DAC1_EQ_ENA */
-#define WM8994_AIF1DAC1_EQ_ENA_SHIFT                 0  /* AIF1DAC1_EQ_ENA */
-#define WM8994_AIF1DAC1_EQ_ENA_WIDTH                 1  /* AIF1DAC1_EQ_ENA */
-
-/*
- * R1153 (0x481) - AIF1 DAC1 EQ Gains (2)
- */
-#define WM8994_AIF1DAC1_EQ_B4_GAIN_MASK         0xF800  /* AIF1DAC1_EQ_B4_GAIN - [15:11] */
-#define WM8994_AIF1DAC1_EQ_B4_GAIN_SHIFT            11  /* AIF1DAC1_EQ_B4_GAIN - [15:11] */
-#define WM8994_AIF1DAC1_EQ_B4_GAIN_WIDTH             5  /* AIF1DAC1_EQ_B4_GAIN - [15:11] */
-#define WM8994_AIF1DAC1_EQ_B5_GAIN_MASK         0x07C0  /* AIF1DAC1_EQ_B5_GAIN - [10:6] */
-#define WM8994_AIF1DAC1_EQ_B5_GAIN_SHIFT             6  /* AIF1DAC1_EQ_B5_GAIN - [10:6] */
-#define WM8994_AIF1DAC1_EQ_B5_GAIN_WIDTH             5  /* AIF1DAC1_EQ_B5_GAIN - [10:6] */
-
-/*
- * R1154 (0x482) - AIF1 DAC1 EQ Band 1 A
- */
-#define WM8994_AIF1DAC1_EQ_B1_A_MASK            0xFFFF  /* AIF1DAC1_EQ_B1_A - [15:0] */
-#define WM8994_AIF1DAC1_EQ_B1_A_SHIFT                0  /* AIF1DAC1_EQ_B1_A - [15:0] */
-#define WM8994_AIF1DAC1_EQ_B1_A_WIDTH               16  /* AIF1DAC1_EQ_B1_A - [15:0] */
-
-/*
- * R1155 (0x483) - AIF1 DAC1 EQ Band 1 B
- */
-#define WM8994_AIF1DAC1_EQ_B1_B_MASK            0xFFFF  /* AIF1DAC1_EQ_B1_B - [15:0] */
-#define WM8994_AIF1DAC1_EQ_B1_B_SHIFT                0  /* AIF1DAC1_EQ_B1_B - [15:0] */
-#define WM8994_AIF1DAC1_EQ_B1_B_WIDTH               16  /* AIF1DAC1_EQ_B1_B - [15:0] */
-
-/*
- * R1156 (0x484) - AIF1 DAC1 EQ Band 1 PG
- */
-#define WM8994_AIF1DAC1_EQ_B1_PG_MASK           0xFFFF  /* AIF1DAC1_EQ_B1_PG - [15:0] */
-#define WM8994_AIF1DAC1_EQ_B1_PG_SHIFT               0  /* AIF1DAC1_EQ_B1_PG - [15:0] */
-#define WM8994_AIF1DAC1_EQ_B1_PG_WIDTH              16  /* AIF1DAC1_EQ_B1_PG - [15:0] */
-
-/*
- * R1157 (0x485) - AIF1 DAC1 EQ Band 2 A
- */
-#define WM8994_AIF1DAC1_EQ_B2_A_MASK            0xFFFF  /* AIF1DAC1_EQ_B2_A - [15:0] */
-#define WM8994_AIF1DAC1_EQ_B2_A_SHIFT                0  /* AIF1DAC1_EQ_B2_A - [15:0] */
-#define WM8994_AIF1DAC1_EQ_B2_A_WIDTH               16  /* AIF1DAC1_EQ_B2_A - [15:0] */
-
-/*
- * R1158 (0x486) - AIF1 DAC1 EQ Band 2 B
- */
-#define WM8994_AIF1DAC1_EQ_B2_B_MASK            0xFFFF  /* AIF1DAC1_EQ_B2_B - [15:0] */
-#define WM8994_AIF1DAC1_EQ_B2_B_SHIFT                0  /* AIF1DAC1_EQ_B2_B - [15:0] */
-#define WM8994_AIF1DAC1_EQ_B2_B_WIDTH               16  /* AIF1DAC1_EQ_B2_B - [15:0] */
-
-/*
- * R1159 (0x487) - AIF1 DAC1 EQ Band 2 C
- */
-#define WM8994_AIF1DAC1_EQ_B2_C_MASK            0xFFFF  /* AIF1DAC1_EQ_B2_C - [15:0] */
-#define WM8994_AIF1DAC1_EQ_B2_C_SHIFT                0  /* AIF1DAC1_EQ_B2_C - [15:0] */
-#define WM8994_AIF1DAC1_EQ_B2_C_WIDTH               16  /* AIF1DAC1_EQ_B2_C - [15:0] */
-
-/*
- * R1160 (0x488) - AIF1 DAC1 EQ Band 2 PG
- */
-#define WM8994_AIF1DAC1_EQ_B2_PG_MASK           0xFFFF  /* AIF1DAC1_EQ_B2_PG - [15:0] */
-#define WM8994_AIF1DAC1_EQ_B2_PG_SHIFT               0  /* AIF1DAC1_EQ_B2_PG - [15:0] */
-#define WM8994_AIF1DAC1_EQ_B2_PG_WIDTH              16  /* AIF1DAC1_EQ_B2_PG - [15:0] */
-
-/*
- * R1161 (0x489) - AIF1 DAC1 EQ Band 3 A
- */
-#define WM8994_AIF1DAC1_EQ_B3_A_MASK            0xFFFF  /* AIF1DAC1_EQ_B3_A - [15:0] */
-#define WM8994_AIF1DAC1_EQ_B3_A_SHIFT                0  /* AIF1DAC1_EQ_B3_A - [15:0] */
-#define WM8994_AIF1DAC1_EQ_B3_A_WIDTH               16  /* AIF1DAC1_EQ_B3_A - [15:0] */
-
-/*
- * R1162 (0x48A) - AIF1 DAC1 EQ Band 3 B
- */
-#define WM8994_AIF1DAC1_EQ_B3_B_MASK            0xFFFF  /* AIF1DAC1_EQ_B3_B - [15:0] */
-#define WM8994_AIF1DAC1_EQ_B3_B_SHIFT                0  /* AIF1DAC1_EQ_B3_B - [15:0] */
-#define WM8994_AIF1DAC1_EQ_B3_B_WIDTH               16  /* AIF1DAC1_EQ_B3_B - [15:0] */
-
-/*
- * R1163 (0x48B) - AIF1 DAC1 EQ Band 3 C
- */
-#define WM8994_AIF1DAC1_EQ_B3_C_MASK            0xFFFF  /* AIF1DAC1_EQ_B3_C - [15:0] */
-#define WM8994_AIF1DAC1_EQ_B3_C_SHIFT                0  /* AIF1DAC1_EQ_B3_C - [15:0] */
-#define WM8994_AIF1DAC1_EQ_B3_C_WIDTH               16  /* AIF1DAC1_EQ_B3_C - [15:0] */
-
-/*
- * R1164 (0x48C) - AIF1 DAC1 EQ Band 3 PG
- */
-#define WM8994_AIF1DAC1_EQ_B3_PG_MASK           0xFFFF  /* AIF1DAC1_EQ_B3_PG - [15:0] */
-#define WM8994_AIF1DAC1_EQ_B3_PG_SHIFT               0  /* AIF1DAC1_EQ_B3_PG - [15:0] */
-#define WM8994_AIF1DAC1_EQ_B3_PG_WIDTH              16  /* AIF1DAC1_EQ_B3_PG - [15:0] */
-
-/*
- * R1165 (0x48D) - AIF1 DAC1 EQ Band 4 A
- */
-#define WM8994_AIF1DAC1_EQ_B4_A_MASK            0xFFFF  /* AIF1DAC1_EQ_B4_A - [15:0] */
-#define WM8994_AIF1DAC1_EQ_B4_A_SHIFT                0  /* AIF1DAC1_EQ_B4_A - [15:0] */
-#define WM8994_AIF1DAC1_EQ_B4_A_WIDTH               16  /* AIF1DAC1_EQ_B4_A - [15:0] */
-
-/*
- * R1166 (0x48E) - AIF1 DAC1 EQ Band 4 B
- */
-#define WM8994_AIF1DAC1_EQ_B4_B_MASK            0xFFFF  /* AIF1DAC1_EQ_B4_B - [15:0] */
-#define WM8994_AIF1DAC1_EQ_B4_B_SHIFT                0  /* AIF1DAC1_EQ_B4_B - [15:0] */
-#define WM8994_AIF1DAC1_EQ_B4_B_WIDTH               16  /* AIF1DAC1_EQ_B4_B - [15:0] */
-
-/*
- * R1167 (0x48F) - AIF1 DAC1 EQ Band 4 C
- */
-#define WM8994_AIF1DAC1_EQ_B4_C_MASK            0xFFFF  /* AIF1DAC1_EQ_B4_C - [15:0] */
-#define WM8994_AIF1DAC1_EQ_B4_C_SHIFT                0  /* AIF1DAC1_EQ_B4_C - [15:0] */
-#define WM8994_AIF1DAC1_EQ_B4_C_WIDTH               16  /* AIF1DAC1_EQ_B4_C - [15:0] */
-
-/*
- * R1168 (0x490) - AIF1 DAC1 EQ Band 4 PG
- */
-#define WM8994_AIF1DAC1_EQ_B4_PG_MASK           0xFFFF  /* AIF1DAC1_EQ_B4_PG - [15:0] */
-#define WM8994_AIF1DAC1_EQ_B4_PG_SHIFT               0  /* AIF1DAC1_EQ_B4_PG - [15:0] */
-#define WM8994_AIF1DAC1_EQ_B4_PG_WIDTH              16  /* AIF1DAC1_EQ_B4_PG - [15:0] */
-
-/*
- * R1169 (0x491) - AIF1 DAC1 EQ Band 5 A
- */
-#define WM8994_AIF1DAC1_EQ_B5_A_MASK            0xFFFF  /* AIF1DAC1_EQ_B5_A - [15:0] */
-#define WM8994_AIF1DAC1_EQ_B5_A_SHIFT                0  /* AIF1DAC1_EQ_B5_A - [15:0] */
-#define WM8994_AIF1DAC1_EQ_B5_A_WIDTH               16  /* AIF1DAC1_EQ_B5_A - [15:0] */
-
-/*
- * R1170 (0x492) - AIF1 DAC1 EQ Band 5 B
- */
-#define WM8994_AIF1DAC1_EQ_B5_B_MASK            0xFFFF  /* AIF1DAC1_EQ_B5_B - [15:0] */
-#define WM8994_AIF1DAC1_EQ_B5_B_SHIFT                0  /* AIF1DAC1_EQ_B5_B - [15:0] */
-#define WM8994_AIF1DAC1_EQ_B5_B_WIDTH               16  /* AIF1DAC1_EQ_B5_B - [15:0] */
-
-/*
- * R1171 (0x493) - AIF1 DAC1 EQ Band 5 PG
- */
-#define WM8994_AIF1DAC1_EQ_B5_PG_MASK           0xFFFF  /* AIF1DAC1_EQ_B5_PG - [15:0] */
-#define WM8994_AIF1DAC1_EQ_B5_PG_SHIFT               0  /* AIF1DAC1_EQ_B5_PG - [15:0] */
-#define WM8994_AIF1DAC1_EQ_B5_PG_WIDTH              16  /* AIF1DAC1_EQ_B5_PG - [15:0] */
-
-/*
- * R1184 (0x4A0) - AIF1 DAC2 EQ Gains (1)
- */
-#define WM8994_AIF1DAC2_EQ_B1_GAIN_MASK         0xF800  /* AIF1DAC2_EQ_B1_GAIN - [15:11] */
-#define WM8994_AIF1DAC2_EQ_B1_GAIN_SHIFT            11  /* AIF1DAC2_EQ_B1_GAIN - [15:11] */
-#define WM8994_AIF1DAC2_EQ_B1_GAIN_WIDTH             5  /* AIF1DAC2_EQ_B1_GAIN - [15:11] */
-#define WM8994_AIF1DAC2_EQ_B2_GAIN_MASK         0x07C0  /* AIF1DAC2_EQ_B2_GAIN - [10:6] */
-#define WM8994_AIF1DAC2_EQ_B2_GAIN_SHIFT             6  /* AIF1DAC2_EQ_B2_GAIN - [10:6] */
-#define WM8994_AIF1DAC2_EQ_B2_GAIN_WIDTH             5  /* AIF1DAC2_EQ_B2_GAIN - [10:6] */
-#define WM8994_AIF1DAC2_EQ_B3_GAIN_MASK         0x003E  /* AIF1DAC2_EQ_B3_GAIN - [5:1] */
-#define WM8994_AIF1DAC2_EQ_B3_GAIN_SHIFT             1  /* AIF1DAC2_EQ_B3_GAIN - [5:1] */
-#define WM8994_AIF1DAC2_EQ_B3_GAIN_WIDTH             5  /* AIF1DAC2_EQ_B3_GAIN - [5:1] */
-#define WM8994_AIF1DAC2_EQ_ENA                  0x0001  /* AIF1DAC2_EQ_ENA */
-#define WM8994_AIF1DAC2_EQ_ENA_MASK             0x0001  /* AIF1DAC2_EQ_ENA */
-#define WM8994_AIF1DAC2_EQ_ENA_SHIFT                 0  /* AIF1DAC2_EQ_ENA */
-#define WM8994_AIF1DAC2_EQ_ENA_WIDTH                 1  /* AIF1DAC2_EQ_ENA */
-
-/*
- * R1185 (0x4A1) - AIF1 DAC2 EQ Gains (2)
- */
-#define WM8994_AIF1DAC2_EQ_B4_GAIN_MASK         0xF800  /* AIF1DAC2_EQ_B4_GAIN - [15:11] */
-#define WM8994_AIF1DAC2_EQ_B4_GAIN_SHIFT            11  /* AIF1DAC2_EQ_B4_GAIN - [15:11] */
-#define WM8994_AIF1DAC2_EQ_B4_GAIN_WIDTH             5  /* AIF1DAC2_EQ_B4_GAIN - [15:11] */
-#define WM8994_AIF1DAC2_EQ_B5_GAIN_MASK         0x07C0  /* AIF1DAC2_EQ_B5_GAIN - [10:6] */
-#define WM8994_AIF1DAC2_EQ_B5_GAIN_SHIFT             6  /* AIF1DAC2_EQ_B5_GAIN - [10:6] */
-#define WM8994_AIF1DAC2_EQ_B5_GAIN_WIDTH             5  /* AIF1DAC2_EQ_B5_GAIN - [10:6] */
-
-/*
- * R1186 (0x4A2) - AIF1 DAC2 EQ Band 1 A
- */
-#define WM8994_AIF1DAC2_EQ_B1_A_MASK            0xFFFF  /* AIF1DAC2_EQ_B1_A - [15:0] */
-#define WM8994_AIF1DAC2_EQ_B1_A_SHIFT                0  /* AIF1DAC2_EQ_B1_A - [15:0] */
-#define WM8994_AIF1DAC2_EQ_B1_A_WIDTH               16  /* AIF1DAC2_EQ_B1_A - [15:0] */
-
-/*
- * R1187 (0x4A3) - AIF1 DAC2 EQ Band 1 B
- */
-#define WM8994_AIF1DAC2_EQ_B1_B_MASK            0xFFFF  /* AIF1DAC2_EQ_B1_B - [15:0] */
-#define WM8994_AIF1DAC2_EQ_B1_B_SHIFT                0  /* AIF1DAC2_EQ_B1_B - [15:0] */
-#define WM8994_AIF1DAC2_EQ_B1_B_WIDTH               16  /* AIF1DAC2_EQ_B1_B - [15:0] */
-
-/*
- * R1188 (0x4A4) - AIF1 DAC2 EQ Band 1 PG
- */
-#define WM8994_AIF1DAC2_EQ_B1_PG_MASK           0xFFFF  /* AIF1DAC2_EQ_B1_PG - [15:0] */
-#define WM8994_AIF1DAC2_EQ_B1_PG_SHIFT               0  /* AIF1DAC2_EQ_B1_PG - [15:0] */
-#define WM8994_AIF1DAC2_EQ_B1_PG_WIDTH              16  /* AIF1DAC2_EQ_B1_PG - [15:0] */
-
-/*
- * R1189 (0x4A5) - AIF1 DAC2 EQ Band 2 A
- */
-#define WM8994_AIF1DAC2_EQ_B2_A_MASK            0xFFFF  /* AIF1DAC2_EQ_B2_A - [15:0] */
-#define WM8994_AIF1DAC2_EQ_B2_A_SHIFT                0  /* AIF1DAC2_EQ_B2_A - [15:0] */
-#define WM8994_AIF1DAC2_EQ_B2_A_WIDTH               16  /* AIF1DAC2_EQ_B2_A - [15:0] */
-
-/*
- * R1190 (0x4A6) - AIF1 DAC2 EQ Band 2 B
- */
-#define WM8994_AIF1DAC2_EQ_B2_B_MASK            0xFFFF  /* AIF1DAC2_EQ_B2_B - [15:0] */
-#define WM8994_AIF1DAC2_EQ_B2_B_SHIFT                0  /* AIF1DAC2_EQ_B2_B - [15:0] */
-#define WM8994_AIF1DAC2_EQ_B2_B_WIDTH               16  /* AIF1DAC2_EQ_B2_B - [15:0] */
-
-/*
- * R1191 (0x4A7) - AIF1 DAC2 EQ Band 2 C
- */
-#define WM8994_AIF1DAC2_EQ_B2_C_MASK            0xFFFF  /* AIF1DAC2_EQ_B2_C - [15:0] */
-#define WM8994_AIF1DAC2_EQ_B2_C_SHIFT                0  /* AIF1DAC2_EQ_B2_C - [15:0] */
-#define WM8994_AIF1DAC2_EQ_B2_C_WIDTH               16  /* AIF1DAC2_EQ_B2_C - [15:0] */
-
-/*
- * R1192 (0x4A8) - AIF1 DAC2 EQ Band 2 PG
- */
-#define WM8994_AIF1DAC2_EQ_B2_PG_MASK           0xFFFF  /* AIF1DAC2_EQ_B2_PG - [15:0] */
-#define WM8994_AIF1DAC2_EQ_B2_PG_SHIFT               0  /* AIF1DAC2_EQ_B2_PG - [15:0] */
-#define WM8994_AIF1DAC2_EQ_B2_PG_WIDTH              16  /* AIF1DAC2_EQ_B2_PG - [15:0] */
-
-/*
- * R1193 (0x4A9) - AIF1 DAC2 EQ Band 3 A
- */
-#define WM8994_AIF1DAC2_EQ_B3_A_MASK            0xFFFF  /* AIF1DAC2_EQ_B3_A - [15:0] */
-#define WM8994_AIF1DAC2_EQ_B3_A_SHIFT                0  /* AIF1DAC2_EQ_B3_A - [15:0] */
-#define WM8994_AIF1DAC2_EQ_B3_A_WIDTH               16  /* AIF1DAC2_EQ_B3_A - [15:0] */
-
-/*
- * R1194 (0x4AA) - AIF1 DAC2 EQ Band 3 B
- */
-#define WM8994_AIF1DAC2_EQ_B3_B_MASK            0xFFFF  /* AIF1DAC2_EQ_B3_B - [15:0] */
-#define WM8994_AIF1DAC2_EQ_B3_B_SHIFT                0  /* AIF1DAC2_EQ_B3_B - [15:0] */
-#define WM8994_AIF1DAC2_EQ_B3_B_WIDTH               16  /* AIF1DAC2_EQ_B3_B - [15:0] */
-
-/*
- * R1195 (0x4AB) - AIF1 DAC2 EQ Band 3 C
- */
-#define WM8994_AIF1DAC2_EQ_B3_C_MASK            0xFFFF  /* AIF1DAC2_EQ_B3_C - [15:0] */
-#define WM8994_AIF1DAC2_EQ_B3_C_SHIFT                0  /* AIF1DAC2_EQ_B3_C - [15:0] */
-#define WM8994_AIF1DAC2_EQ_B3_C_WIDTH               16  /* AIF1DAC2_EQ_B3_C - [15:0] */
-
-/*
- * R1196 (0x4AC) - AIF1 DAC2 EQ Band 3 PG
- */
-#define WM8994_AIF1DAC2_EQ_B3_PG_MASK           0xFFFF  /* AIF1DAC2_EQ_B3_PG - [15:0] */
-#define WM8994_AIF1DAC2_EQ_B3_PG_SHIFT               0  /* AIF1DAC2_EQ_B3_PG - [15:0] */
-#define WM8994_AIF1DAC2_EQ_B3_PG_WIDTH              16  /* AIF1DAC2_EQ_B3_PG - [15:0] */
-
-/*
- * R1197 (0x4AD) - AIF1 DAC2 EQ Band 4 A
- */
-#define WM8994_AIF1DAC2_EQ_B4_A_MASK            0xFFFF  /* AIF1DAC2_EQ_B4_A - [15:0] */
-#define WM8994_AIF1DAC2_EQ_B4_A_SHIFT                0  /* AIF1DAC2_EQ_B4_A - [15:0] */
-#define WM8994_AIF1DAC2_EQ_B4_A_WIDTH               16  /* AIF1DAC2_EQ_B4_A - [15:0] */
-
-/*
- * R1198 (0x4AE) - AIF1 DAC2 EQ Band 4 B
- */
-#define WM8994_AIF1DAC2_EQ_B4_B_MASK            0xFFFF  /* AIF1DAC2_EQ_B4_B - [15:0] */
-#define WM8994_AIF1DAC2_EQ_B4_B_SHIFT                0  /* AIF1DAC2_EQ_B4_B - [15:0] */
-#define WM8994_AIF1DAC2_EQ_B4_B_WIDTH               16  /* AIF1DAC2_EQ_B4_B - [15:0] */
-
-/*
- * R1199 (0x4AF) - AIF1 DAC2 EQ Band 4 C
- */
-#define WM8994_AIF1DAC2_EQ_B4_C_MASK            0xFFFF  /* AIF1DAC2_EQ_B4_C - [15:0] */
-#define WM8994_AIF1DAC2_EQ_B4_C_SHIFT                0  /* AIF1DAC2_EQ_B4_C - [15:0] */
-#define WM8994_AIF1DAC2_EQ_B4_C_WIDTH               16  /* AIF1DAC2_EQ_B4_C - [15:0] */
-
-/*
- * R1200 (0x4B0) - AIF1 DAC2 EQ Band 4 PG
- */
-#define WM8994_AIF1DAC2_EQ_B4_PG_MASK           0xFFFF  /* AIF1DAC2_EQ_B4_PG - [15:0] */
-#define WM8994_AIF1DAC2_EQ_B4_PG_SHIFT               0  /* AIF1DAC2_EQ_B4_PG - [15:0] */
-#define WM8994_AIF1DAC2_EQ_B4_PG_WIDTH              16  /* AIF1DAC2_EQ_B4_PG - [15:0] */
-
-/*
- * R1201 (0x4B1) - AIF1 DAC2 EQ Band 5 A
- */
-#define WM8994_AIF1DAC2_EQ_B5_A_MASK            0xFFFF  /* AIF1DAC2_EQ_B5_A - [15:0] */
-#define WM8994_AIF1DAC2_EQ_B5_A_SHIFT                0  /* AIF1DAC2_EQ_B5_A - [15:0] */
-#define WM8994_AIF1DAC2_EQ_B5_A_WIDTH               16  /* AIF1DAC2_EQ_B5_A - [15:0] */
-
-/*
- * R1202 (0x4B2) - AIF1 DAC2 EQ Band 5 B
- */
-#define WM8994_AIF1DAC2_EQ_B5_B_MASK            0xFFFF  /* AIF1DAC2_EQ_B5_B - [15:0] */
-#define WM8994_AIF1DAC2_EQ_B5_B_SHIFT                0  /* AIF1DAC2_EQ_B5_B - [15:0] */
-#define WM8994_AIF1DAC2_EQ_B5_B_WIDTH               16  /* AIF1DAC2_EQ_B5_B - [15:0] */
-
-/*
- * R1203 (0x4B3) - AIF1 DAC2 EQ Band 5 PG
- */
-#define WM8994_AIF1DAC2_EQ_B5_PG_MASK           0xFFFF  /* AIF1DAC2_EQ_B5_PG - [15:0] */
-#define WM8994_AIF1DAC2_EQ_B5_PG_SHIFT               0  /* AIF1DAC2_EQ_B5_PG - [15:0] */
-#define WM8994_AIF1DAC2_EQ_B5_PG_WIDTH              16  /* AIF1DAC2_EQ_B5_PG - [15:0] */
-
-/*
- * R1280 (0x500) - AIF2 ADC Left Volume
- */
-#define WM8994_AIF2ADC_VU                       0x0100  /* AIF2ADC_VU */
-#define WM8994_AIF2ADC_VU_MASK                  0x0100  /* AIF2ADC_VU */
-#define WM8994_AIF2ADC_VU_SHIFT                      8  /* AIF2ADC_VU */
-#define WM8994_AIF2ADC_VU_WIDTH                      1  /* AIF2ADC_VU */
-#define WM8994_AIF2ADCL_VOL_MASK                0x00FF  /* AIF2ADCL_VOL - [7:0] */
-#define WM8994_AIF2ADCL_VOL_SHIFT                    0  /* AIF2ADCL_VOL - [7:0] */
-#define WM8994_AIF2ADCL_VOL_WIDTH                    8  /* AIF2ADCL_VOL - [7:0] */
-
-/*
- * R1281 (0x501) - AIF2 ADC Right Volume
- */
-#define WM8994_AIF2ADC_VU                       0x0100  /* AIF2ADC_VU */
-#define WM8994_AIF2ADC_VU_MASK                  0x0100  /* AIF2ADC_VU */
-#define WM8994_AIF2ADC_VU_SHIFT                      8  /* AIF2ADC_VU */
-#define WM8994_AIF2ADC_VU_WIDTH                      1  /* AIF2ADC_VU */
-#define WM8994_AIF2ADCR_VOL_MASK                0x00FF  /* AIF2ADCR_VOL - [7:0] */
-#define WM8994_AIF2ADCR_VOL_SHIFT                    0  /* AIF2ADCR_VOL - [7:0] */
-#define WM8994_AIF2ADCR_VOL_WIDTH                    8  /* AIF2ADCR_VOL - [7:0] */
-
-/*
- * R1282 (0x502) - AIF2 DAC Left Volume
- */
-#define WM8994_AIF2DAC_VU                       0x0100  /* AIF2DAC_VU */
-#define WM8994_AIF2DAC_VU_MASK                  0x0100  /* AIF2DAC_VU */
-#define WM8994_AIF2DAC_VU_SHIFT                      8  /* AIF2DAC_VU */
-#define WM8994_AIF2DAC_VU_WIDTH                      1  /* AIF2DAC_VU */
-#define WM8994_AIF2DACL_VOL_MASK                0x00FF  /* AIF2DACL_VOL - [7:0] */
-#define WM8994_AIF2DACL_VOL_SHIFT                    0  /* AIF2DACL_VOL - [7:0] */
-#define WM8994_AIF2DACL_VOL_WIDTH                    8  /* AIF2DACL_VOL - [7:0] */
-
-/*
- * R1283 (0x503) - AIF2 DAC Right Volume
- */
-#define WM8994_AIF2DAC_VU                       0x0100  /* AIF2DAC_VU */
-#define WM8994_AIF2DAC_VU_MASK                  0x0100  /* AIF2DAC_VU */
-#define WM8994_AIF2DAC_VU_SHIFT                      8  /* AIF2DAC_VU */
-#define WM8994_AIF2DAC_VU_WIDTH                      1  /* AIF2DAC_VU */
-#define WM8994_AIF2DACR_VOL_MASK                0x00FF  /* AIF2DACR_VOL - [7:0] */
-#define WM8994_AIF2DACR_VOL_SHIFT                    0  /* AIF2DACR_VOL - [7:0] */
-#define WM8994_AIF2DACR_VOL_WIDTH                    8  /* AIF2DACR_VOL - [7:0] */
-
-/*
- * R1296 (0x510) - AIF2 ADC Filters
- */
-#define WM8994_AIF2ADC_4FS                      0x8000  /* AIF2ADC_4FS */
-#define WM8994_AIF2ADC_4FS_MASK                 0x8000  /* AIF2ADC_4FS */
-#define WM8994_AIF2ADC_4FS_SHIFT                    15  /* AIF2ADC_4FS */
-#define WM8994_AIF2ADC_4FS_WIDTH                     1  /* AIF2ADC_4FS */
-#define WM8994_AIF2ADC_HPF_CUT_MASK             0x6000  /* AIF2ADC_HPF_CUT - [14:13] */
-#define WM8994_AIF2ADC_HPF_CUT_SHIFT                13  /* AIF2ADC_HPF_CUT - [14:13] */
-#define WM8994_AIF2ADC_HPF_CUT_WIDTH                 2  /* AIF2ADC_HPF_CUT - [14:13] */
-#define WM8994_AIF2ADCL_HPF                     0x1000  /* AIF2ADCL_HPF */
-#define WM8994_AIF2ADCL_HPF_MASK                0x1000  /* AIF2ADCL_HPF */
-#define WM8994_AIF2ADCL_HPF_SHIFT                   12  /* AIF2ADCL_HPF */
-#define WM8994_AIF2ADCL_HPF_WIDTH                    1  /* AIF2ADCL_HPF */
-#define WM8994_AIF2ADCR_HPF                     0x0800  /* AIF2ADCR_HPF */
-#define WM8994_AIF2ADCR_HPF_MASK                0x0800  /* AIF2ADCR_HPF */
-#define WM8994_AIF2ADCR_HPF_SHIFT                   11  /* AIF2ADCR_HPF */
-#define WM8994_AIF2ADCR_HPF_WIDTH                    1  /* AIF2ADCR_HPF */
-
-/*
- * R1312 (0x520) - AIF2 DAC Filters (1)
- */
-#define WM8994_AIF2DAC_MUTE                     0x0200  /* AIF2DAC_MUTE */
-#define WM8994_AIF2DAC_MUTE_MASK                0x0200  /* AIF2DAC_MUTE */
-#define WM8994_AIF2DAC_MUTE_SHIFT                    9  /* AIF2DAC_MUTE */
-#define WM8994_AIF2DAC_MUTE_WIDTH                    1  /* AIF2DAC_MUTE */
-#define WM8994_AIF2DAC_MONO                     0x0080  /* AIF2DAC_MONO */
-#define WM8994_AIF2DAC_MONO_MASK                0x0080  /* AIF2DAC_MONO */
-#define WM8994_AIF2DAC_MONO_SHIFT                    7  /* AIF2DAC_MONO */
-#define WM8994_AIF2DAC_MONO_WIDTH                    1  /* AIF2DAC_MONO */
-#define WM8994_AIF2DAC_MUTERATE                 0x0020  /* AIF2DAC_MUTERATE */
-#define WM8994_AIF2DAC_MUTERATE_MASK            0x0020  /* AIF2DAC_MUTERATE */
-#define WM8994_AIF2DAC_MUTERATE_SHIFT                5  /* AIF2DAC_MUTERATE */
-#define WM8994_AIF2DAC_MUTERATE_WIDTH                1  /* AIF2DAC_MUTERATE */
-#define WM8994_AIF2DAC_UNMUTE_RAMP              0x0010  /* AIF2DAC_UNMUTE_RAMP */
-#define WM8994_AIF2DAC_UNMUTE_RAMP_MASK         0x0010  /* AIF2DAC_UNMUTE_RAMP */
-#define WM8994_AIF2DAC_UNMUTE_RAMP_SHIFT             4  /* AIF2DAC_UNMUTE_RAMP */
-#define WM8994_AIF2DAC_UNMUTE_RAMP_WIDTH             1  /* AIF2DAC_UNMUTE_RAMP */
-#define WM8994_AIF2DAC_DEEMP_MASK               0x0006  /* AIF2DAC_DEEMP - [2:1] */
-#define WM8994_AIF2DAC_DEEMP_SHIFT                   1  /* AIF2DAC_DEEMP - [2:1] */
-#define WM8994_AIF2DAC_DEEMP_WIDTH                   2  /* AIF2DAC_DEEMP - [2:1] */
-
-/*
- * R1313 (0x521) - AIF2 DAC Filters (2)
- */
-#define WM8994_AIF2DAC_3D_GAIN_MASK             0x3E00  /* AIF2DAC_3D_GAIN - [13:9] */
-#define WM8994_AIF2DAC_3D_GAIN_SHIFT                 9  /* AIF2DAC_3D_GAIN - [13:9] */
-#define WM8994_AIF2DAC_3D_GAIN_WIDTH                 5  /* AIF2DAC_3D_GAIN - [13:9] */
-#define WM8994_AIF2DAC_3D_ENA                   0x0100  /* AIF2DAC_3D_ENA */
-#define WM8994_AIF2DAC_3D_ENA_MASK              0x0100  /* AIF2DAC_3D_ENA */
-#define WM8994_AIF2DAC_3D_ENA_SHIFT                  8  /* AIF2DAC_3D_ENA */
-#define WM8994_AIF2DAC_3D_ENA_WIDTH                  1  /* AIF2DAC_3D_ENA */
-
-/*
- * R1328 (0x530) - AIF2 DAC Noise Gate
- */
-#define WM8958_AIF2DAC_NG_HLD_MASK              0x0060  /* AIF2DAC_NG_HLD - [6:5] */
-#define WM8958_AIF2DAC_NG_HLD_SHIFT                  5  /* AIF2DAC_NG_HLD - [6:5] */
-#define WM8958_AIF2DAC_NG_HLD_WIDTH                  2  /* AIF2DAC_NG_HLD - [6:5] */
-#define WM8958_AIF2DAC_NG_THR_MASK              0x000E  /* AIF2DAC_NG_THR - [3:1] */
-#define WM8958_AIF2DAC_NG_THR_SHIFT                  1  /* AIF2DAC_NG_THR - [3:1] */
-#define WM8958_AIF2DAC_NG_THR_WIDTH                  3  /* AIF2DAC_NG_THR - [3:1] */
-#define WM8958_AIF2DAC_NG_ENA                   0x0001  /* AIF2DAC_NG_ENA */
-#define WM8958_AIF2DAC_NG_ENA_MASK              0x0001  /* AIF2DAC_NG_ENA */
-#define WM8958_AIF2DAC_NG_ENA_SHIFT                  0  /* AIF2DAC_NG_ENA */
-#define WM8958_AIF2DAC_NG_ENA_WIDTH                  1  /* AIF2DAC_NG_ENA */
-
-/*
- * R1344 (0x540) - AIF2 DRC (1)
- */
-#define WM8994_AIF2DRC_SIG_DET_RMS_MASK         0xF800  /* AIF2DRC_SIG_DET_RMS - [15:11] */
-#define WM8994_AIF2DRC_SIG_DET_RMS_SHIFT            11  /* AIF2DRC_SIG_DET_RMS - [15:11] */
-#define WM8994_AIF2DRC_SIG_DET_RMS_WIDTH             5  /* AIF2DRC_SIG_DET_RMS - [15:11] */
-#define WM8994_AIF2DRC_SIG_DET_PK_MASK          0x0600  /* AIF2DRC_SIG_DET_PK - [10:9] */
-#define WM8994_AIF2DRC_SIG_DET_PK_SHIFT              9  /* AIF2DRC_SIG_DET_PK - [10:9] */
-#define WM8994_AIF2DRC_SIG_DET_PK_WIDTH              2  /* AIF2DRC_SIG_DET_PK - [10:9] */
-#define WM8994_AIF2DRC_NG_ENA                   0x0100  /* AIF2DRC_NG_ENA */
-#define WM8994_AIF2DRC_NG_ENA_MASK              0x0100  /* AIF2DRC_NG_ENA */
-#define WM8994_AIF2DRC_NG_ENA_SHIFT                  8  /* AIF2DRC_NG_ENA */
-#define WM8994_AIF2DRC_NG_ENA_WIDTH                  1  /* AIF2DRC_NG_ENA */
-#define WM8994_AIF2DRC_SIG_DET_MODE             0x0080  /* AIF2DRC_SIG_DET_MODE */
-#define WM8994_AIF2DRC_SIG_DET_MODE_MASK        0x0080  /* AIF2DRC_SIG_DET_MODE */
-#define WM8994_AIF2DRC_SIG_DET_MODE_SHIFT            7  /* AIF2DRC_SIG_DET_MODE */
-#define WM8994_AIF2DRC_SIG_DET_MODE_WIDTH            1  /* AIF2DRC_SIG_DET_MODE */
-#define WM8994_AIF2DRC_SIG_DET                  0x0040  /* AIF2DRC_SIG_DET */
-#define WM8994_AIF2DRC_SIG_DET_MASK             0x0040  /* AIF2DRC_SIG_DET */
-#define WM8994_AIF2DRC_SIG_DET_SHIFT                 6  /* AIF2DRC_SIG_DET */
-#define WM8994_AIF2DRC_SIG_DET_WIDTH                 1  /* AIF2DRC_SIG_DET */
-#define WM8994_AIF2DRC_KNEE2_OP_ENA             0x0020  /* AIF2DRC_KNEE2_OP_ENA */
-#define WM8994_AIF2DRC_KNEE2_OP_ENA_MASK        0x0020  /* AIF2DRC_KNEE2_OP_ENA */
-#define WM8994_AIF2DRC_KNEE2_OP_ENA_SHIFT            5  /* AIF2DRC_KNEE2_OP_ENA */
-#define WM8994_AIF2DRC_KNEE2_OP_ENA_WIDTH            1  /* AIF2DRC_KNEE2_OP_ENA */
-#define WM8994_AIF2DRC_QR                       0x0010  /* AIF2DRC_QR */
-#define WM8994_AIF2DRC_QR_MASK                  0x0010  /* AIF2DRC_QR */
-#define WM8994_AIF2DRC_QR_SHIFT                      4  /* AIF2DRC_QR */
-#define WM8994_AIF2DRC_QR_WIDTH                      1  /* AIF2DRC_QR */
-#define WM8994_AIF2DRC_ANTICLIP                 0x0008  /* AIF2DRC_ANTICLIP */
-#define WM8994_AIF2DRC_ANTICLIP_MASK            0x0008  /* AIF2DRC_ANTICLIP */
-#define WM8994_AIF2DRC_ANTICLIP_SHIFT                3  /* AIF2DRC_ANTICLIP */
-#define WM8994_AIF2DRC_ANTICLIP_WIDTH                1  /* AIF2DRC_ANTICLIP */
-#define WM8994_AIF2DAC_DRC_ENA                  0x0004  /* AIF2DAC_DRC_ENA */
-#define WM8994_AIF2DAC_DRC_ENA_MASK             0x0004  /* AIF2DAC_DRC_ENA */
-#define WM8994_AIF2DAC_DRC_ENA_SHIFT                 2  /* AIF2DAC_DRC_ENA */
-#define WM8994_AIF2DAC_DRC_ENA_WIDTH                 1  /* AIF2DAC_DRC_ENA */
-#define WM8994_AIF2ADCL_DRC_ENA                 0x0002  /* AIF2ADCL_DRC_ENA */
-#define WM8994_AIF2ADCL_DRC_ENA_MASK            0x0002  /* AIF2ADCL_DRC_ENA */
-#define WM8994_AIF2ADCL_DRC_ENA_SHIFT                1  /* AIF2ADCL_DRC_ENA */
-#define WM8994_AIF2ADCL_DRC_ENA_WIDTH                1  /* AIF2ADCL_DRC_ENA */
-#define WM8994_AIF2ADCR_DRC_ENA                 0x0001  /* AIF2ADCR_DRC_ENA */
-#define WM8994_AIF2ADCR_DRC_ENA_MASK            0x0001  /* AIF2ADCR_DRC_ENA */
-#define WM8994_AIF2ADCR_DRC_ENA_SHIFT                0  /* AIF2ADCR_DRC_ENA */
-#define WM8994_AIF2ADCR_DRC_ENA_WIDTH                1  /* AIF2ADCR_DRC_ENA */
-
-/*
- * R1345 (0x541) - AIF2 DRC (2)
- */
-#define WM8994_AIF2DRC_ATK_MASK                 0x1E00  /* AIF2DRC_ATK - [12:9] */
-#define WM8994_AIF2DRC_ATK_SHIFT                     9  /* AIF2DRC_ATK - [12:9] */
-#define WM8994_AIF2DRC_ATK_WIDTH                     4  /* AIF2DRC_ATK - [12:9] */
-#define WM8994_AIF2DRC_DCY_MASK                 0x01E0  /* AIF2DRC_DCY - [8:5] */
-#define WM8994_AIF2DRC_DCY_SHIFT                     5  /* AIF2DRC_DCY - [8:5] */
-#define WM8994_AIF2DRC_DCY_WIDTH                     4  /* AIF2DRC_DCY - [8:5] */
-#define WM8994_AIF2DRC_MINGAIN_MASK             0x001C  /* AIF2DRC_MINGAIN - [4:2] */
-#define WM8994_AIF2DRC_MINGAIN_SHIFT                 2  /* AIF2DRC_MINGAIN - [4:2] */
-#define WM8994_AIF2DRC_MINGAIN_WIDTH                 3  /* AIF2DRC_MINGAIN - [4:2] */
-#define WM8994_AIF2DRC_MAXGAIN_MASK             0x0003  /* AIF2DRC_MAXGAIN - [1:0] */
-#define WM8994_AIF2DRC_MAXGAIN_SHIFT                 0  /* AIF2DRC_MAXGAIN - [1:0] */
-#define WM8994_AIF2DRC_MAXGAIN_WIDTH                 2  /* AIF2DRC_MAXGAIN - [1:0] */
-
-/*
- * R1346 (0x542) - AIF2 DRC (3)
- */
-#define WM8994_AIF2DRC_NG_MINGAIN_MASK          0xF000  /* AIF2DRC_NG_MINGAIN - [15:12] */
-#define WM8994_AIF2DRC_NG_MINGAIN_SHIFT             12  /* AIF2DRC_NG_MINGAIN - [15:12] */
-#define WM8994_AIF2DRC_NG_MINGAIN_WIDTH              4  /* AIF2DRC_NG_MINGAIN - [15:12] */
-#define WM8994_AIF2DRC_NG_EXP_MASK              0x0C00  /* AIF2DRC_NG_EXP - [11:10] */
-#define WM8994_AIF2DRC_NG_EXP_SHIFT                 10  /* AIF2DRC_NG_EXP - [11:10] */
-#define WM8994_AIF2DRC_NG_EXP_WIDTH                  2  /* AIF2DRC_NG_EXP - [11:10] */
-#define WM8994_AIF2DRC_QR_THR_MASK              0x0300  /* AIF2DRC_QR_THR - [9:8] */
-#define WM8994_AIF2DRC_QR_THR_SHIFT                  8  /* AIF2DRC_QR_THR - [9:8] */
-#define WM8994_AIF2DRC_QR_THR_WIDTH                  2  /* AIF2DRC_QR_THR - [9:8] */
-#define WM8994_AIF2DRC_QR_DCY_MASK              0x00C0  /* AIF2DRC_QR_DCY - [7:6] */
-#define WM8994_AIF2DRC_QR_DCY_SHIFT                  6  /* AIF2DRC_QR_DCY - [7:6] */
-#define WM8994_AIF2DRC_QR_DCY_WIDTH                  2  /* AIF2DRC_QR_DCY - [7:6] */
-#define WM8994_AIF2DRC_HI_COMP_MASK             0x0038  /* AIF2DRC_HI_COMP - [5:3] */
-#define WM8994_AIF2DRC_HI_COMP_SHIFT                 3  /* AIF2DRC_HI_COMP - [5:3] */
-#define WM8994_AIF2DRC_HI_COMP_WIDTH                 3  /* AIF2DRC_HI_COMP - [5:3] */
-#define WM8994_AIF2DRC_LO_COMP_MASK             0x0007  /* AIF2DRC_LO_COMP - [2:0] */
-#define WM8994_AIF2DRC_LO_COMP_SHIFT                 0  /* AIF2DRC_LO_COMP - [2:0] */
-#define WM8994_AIF2DRC_LO_COMP_WIDTH                 3  /* AIF2DRC_LO_COMP - [2:0] */
-
-/*
- * R1347 (0x543) - AIF2 DRC (4)
- */
-#define WM8994_AIF2DRC_KNEE_IP_MASK             0x07E0  /* AIF2DRC_KNEE_IP - [10:5] */
-#define WM8994_AIF2DRC_KNEE_IP_SHIFT                 5  /* AIF2DRC_KNEE_IP - [10:5] */
-#define WM8994_AIF2DRC_KNEE_IP_WIDTH                 6  /* AIF2DRC_KNEE_IP - [10:5] */
-#define WM8994_AIF2DRC_KNEE_OP_MASK             0x001F  /* AIF2DRC_KNEE_OP - [4:0] */
-#define WM8994_AIF2DRC_KNEE_OP_SHIFT                 0  /* AIF2DRC_KNEE_OP - [4:0] */
-#define WM8994_AIF2DRC_KNEE_OP_WIDTH                 5  /* AIF2DRC_KNEE_OP - [4:0] */
-
-/*
- * R1348 (0x544) - AIF2 DRC (5)
- */
-#define WM8994_AIF2DRC_KNEE2_IP_MASK            0x03E0  /* AIF2DRC_KNEE2_IP - [9:5] */
-#define WM8994_AIF2DRC_KNEE2_IP_SHIFT                5  /* AIF2DRC_KNEE2_IP - [9:5] */
-#define WM8994_AIF2DRC_KNEE2_IP_WIDTH                5  /* AIF2DRC_KNEE2_IP - [9:5] */
-#define WM8994_AIF2DRC_KNEE2_OP_MASK            0x001F  /* AIF2DRC_KNEE2_OP - [4:0] */
-#define WM8994_AIF2DRC_KNEE2_OP_SHIFT                0  /* AIF2DRC_KNEE2_OP - [4:0] */
-#define WM8994_AIF2DRC_KNEE2_OP_WIDTH                5  /* AIF2DRC_KNEE2_OP - [4:0] */
-
-/*
- * R1408 (0x580) - AIF2 EQ Gains (1)
- */
-#define WM8994_AIF2DAC_EQ_B1_GAIN_MASK          0xF800  /* AIF2DAC_EQ_B1_GAIN - [15:11] */
-#define WM8994_AIF2DAC_EQ_B1_GAIN_SHIFT             11  /* AIF2DAC_EQ_B1_GAIN - [15:11] */
-#define WM8994_AIF2DAC_EQ_B1_GAIN_WIDTH              5  /* AIF2DAC_EQ_B1_GAIN - [15:11] */
-#define WM8994_AIF2DAC_EQ_B2_GAIN_MASK          0x07C0  /* AIF2DAC_EQ_B2_GAIN - [10:6] */
-#define WM8994_AIF2DAC_EQ_B2_GAIN_SHIFT              6  /* AIF2DAC_EQ_B2_GAIN - [10:6] */
-#define WM8994_AIF2DAC_EQ_B2_GAIN_WIDTH              5  /* AIF2DAC_EQ_B2_GAIN - [10:6] */
-#define WM8994_AIF2DAC_EQ_B3_GAIN_MASK          0x003E  /* AIF2DAC_EQ_B3_GAIN - [5:1] */
-#define WM8994_AIF2DAC_EQ_B3_GAIN_SHIFT              1  /* AIF2DAC_EQ_B3_GAIN - [5:1] */
-#define WM8994_AIF2DAC_EQ_B3_GAIN_WIDTH              5  /* AIF2DAC_EQ_B3_GAIN - [5:1] */
-#define WM8994_AIF2DAC_EQ_ENA                   0x0001  /* AIF2DAC_EQ_ENA */
-#define WM8994_AIF2DAC_EQ_ENA_MASK              0x0001  /* AIF2DAC_EQ_ENA */
-#define WM8994_AIF2DAC_EQ_ENA_SHIFT                  0  /* AIF2DAC_EQ_ENA */
-#define WM8994_AIF2DAC_EQ_ENA_WIDTH                  1  /* AIF2DAC_EQ_ENA */
-
-/*
- * R1409 (0x581) - AIF2 EQ Gains (2)
- */
-#define WM8994_AIF2DAC_EQ_B4_GAIN_MASK          0xF800  /* AIF2DAC_EQ_B4_GAIN - [15:11] */
-#define WM8994_AIF2DAC_EQ_B4_GAIN_SHIFT             11  /* AIF2DAC_EQ_B4_GAIN - [15:11] */
-#define WM8994_AIF2DAC_EQ_B4_GAIN_WIDTH              5  /* AIF2DAC_EQ_B4_GAIN - [15:11] */
-#define WM8994_AIF2DAC_EQ_B5_GAIN_MASK          0x07C0  /* AIF2DAC_EQ_B5_GAIN - [10:6] */
-#define WM8994_AIF2DAC_EQ_B5_GAIN_SHIFT              6  /* AIF2DAC_EQ_B5_GAIN - [10:6] */
-#define WM8994_AIF2DAC_EQ_B5_GAIN_WIDTH              5  /* AIF2DAC_EQ_B5_GAIN - [10:6] */
-
-/*
- * R1410 (0x582) - AIF2 EQ Band 1 A
- */
-#define WM8994_AIF2DAC_EQ_B1_A_MASK             0xFFFF  /* AIF2DAC_EQ_B1_A - [15:0] */
-#define WM8994_AIF2DAC_EQ_B1_A_SHIFT                 0  /* AIF2DAC_EQ_B1_A - [15:0] */
-#define WM8994_AIF2DAC_EQ_B1_A_WIDTH                16  /* AIF2DAC_EQ_B1_A - [15:0] */
-
-/*
- * R1411 (0x583) - AIF2 EQ Band 1 B
- */
-#define WM8994_AIF2DAC_EQ_B1_B_MASK             0xFFFF  /* AIF2DAC_EQ_B1_B - [15:0] */
-#define WM8994_AIF2DAC_EQ_B1_B_SHIFT                 0  /* AIF2DAC_EQ_B1_B - [15:0] */
-#define WM8994_AIF2DAC_EQ_B1_B_WIDTH                16  /* AIF2DAC_EQ_B1_B - [15:0] */
-
-/*
- * R1412 (0x584) - AIF2 EQ Band 1 PG
- */
-#define WM8994_AIF2DAC_EQ_B1_PG_MASK            0xFFFF  /* AIF2DAC_EQ_B1_PG - [15:0] */
-#define WM8994_AIF2DAC_EQ_B1_PG_SHIFT                0  /* AIF2DAC_EQ_B1_PG - [15:0] */
-#define WM8994_AIF2DAC_EQ_B1_PG_WIDTH               16  /* AIF2DAC_EQ_B1_PG - [15:0] */
-
-/*
- * R1413 (0x585) - AIF2 EQ Band 2 A
- */
-#define WM8994_AIF2DAC_EQ_B2_A_MASK             0xFFFF  /* AIF2DAC_EQ_B2_A - [15:0] */
-#define WM8994_AIF2DAC_EQ_B2_A_SHIFT                 0  /* AIF2DAC_EQ_B2_A - [15:0] */
-#define WM8994_AIF2DAC_EQ_B2_A_WIDTH                16  /* AIF2DAC_EQ_B2_A - [15:0] */
-
-/*
- * R1414 (0x586) - AIF2 EQ Band 2 B
- */
-#define WM8994_AIF2DAC_EQ_B2_B_MASK             0xFFFF  /* AIF2DAC_EQ_B2_B - [15:0] */
-#define WM8994_AIF2DAC_EQ_B2_B_SHIFT                 0  /* AIF2DAC_EQ_B2_B - [15:0] */
-#define WM8994_AIF2DAC_EQ_B2_B_WIDTH                16  /* AIF2DAC_EQ_B2_B - [15:0] */
-
-/*
- * R1415 (0x587) - AIF2 EQ Band 2 C
- */
-#define WM8994_AIF2DAC_EQ_B2_C_MASK             0xFFFF  /* AIF2DAC_EQ_B2_C - [15:0] */
-#define WM8994_AIF2DAC_EQ_B2_C_SHIFT                 0  /* AIF2DAC_EQ_B2_C - [15:0] */
-#define WM8994_AIF2DAC_EQ_B2_C_WIDTH                16  /* AIF2DAC_EQ_B2_C - [15:0] */
-
-/*
- * R1416 (0x588) - AIF2 EQ Band 2 PG
- */
-#define WM8994_AIF2DAC_EQ_B2_PG_MASK            0xFFFF  /* AIF2DAC_EQ_B2_PG - [15:0] */
-#define WM8994_AIF2DAC_EQ_B2_PG_SHIFT                0  /* AIF2DAC_EQ_B2_PG - [15:0] */
-#define WM8994_AIF2DAC_EQ_B2_PG_WIDTH               16  /* AIF2DAC_EQ_B2_PG - [15:0] */
-
-/*
- * R1417 (0x589) - AIF2 EQ Band 3 A
- */
-#define WM8994_AIF2DAC_EQ_B3_A_MASK             0xFFFF  /* AIF2DAC_EQ_B3_A - [15:0] */
-#define WM8994_AIF2DAC_EQ_B3_A_SHIFT                 0  /* AIF2DAC_EQ_B3_A - [15:0] */
-#define WM8994_AIF2DAC_EQ_B3_A_WIDTH                16  /* AIF2DAC_EQ_B3_A - [15:0] */
-
-/*
- * R1418 (0x58A) - AIF2 EQ Band 3 B
- */
-#define WM8994_AIF2DAC_EQ_B3_B_MASK             0xFFFF  /* AIF2DAC_EQ_B3_B - [15:0] */
-#define WM8994_AIF2DAC_EQ_B3_B_SHIFT                 0  /* AIF2DAC_EQ_B3_B - [15:0] */
-#define WM8994_AIF2DAC_EQ_B3_B_WIDTH                16  /* AIF2DAC_EQ_B3_B - [15:0] */
-
-/*
- * R1419 (0x58B) - AIF2 EQ Band 3 C
- */
-#define WM8994_AIF2DAC_EQ_B3_C_MASK             0xFFFF  /* AIF2DAC_EQ_B3_C - [15:0] */
-#define WM8994_AIF2DAC_EQ_B3_C_SHIFT                 0  /* AIF2DAC_EQ_B3_C - [15:0] */
-#define WM8994_AIF2DAC_EQ_B3_C_WIDTH                16  /* AIF2DAC_EQ_B3_C - [15:0] */
-
-/*
- * R1420 (0x58C) - AIF2 EQ Band 3 PG
- */
-#define WM8994_AIF2DAC_EQ_B3_PG_MASK            0xFFFF  /* AIF2DAC_EQ_B3_PG - [15:0] */
-#define WM8994_AIF2DAC_EQ_B3_PG_SHIFT                0  /* AIF2DAC_EQ_B3_PG - [15:0] */
-#define WM8994_AIF2DAC_EQ_B3_PG_WIDTH               16  /* AIF2DAC_EQ_B3_PG - [15:0] */
-
-/*
- * R1421 (0x58D) - AIF2 EQ Band 4 A
- */
-#define WM8994_AIF2DAC_EQ_B4_A_MASK             0xFFFF  /* AIF2DAC_EQ_B4_A - [15:0] */
-#define WM8994_AIF2DAC_EQ_B4_A_SHIFT                 0  /* AIF2DAC_EQ_B4_A - [15:0] */
-#define WM8994_AIF2DAC_EQ_B4_A_WIDTH                16  /* AIF2DAC_EQ_B4_A - [15:0] */
-
-/*
- * R1422 (0x58E) - AIF2 EQ Band 4 B
- */
-#define WM8994_AIF2DAC_EQ_B4_B_MASK             0xFFFF  /* AIF2DAC_EQ_B4_B - [15:0] */
-#define WM8994_AIF2DAC_EQ_B4_B_SHIFT                 0  /* AIF2DAC_EQ_B4_B - [15:0] */
-#define WM8994_AIF2DAC_EQ_B4_B_WIDTH                16  /* AIF2DAC_EQ_B4_B - [15:0] */
-
-/*
- * R1423 (0x58F) - AIF2 EQ Band 4 C
- */
-#define WM8994_AIF2DAC_EQ_B4_C_MASK             0xFFFF  /* AIF2DAC_EQ_B4_C - [15:0] */
-#define WM8994_AIF2DAC_EQ_B4_C_SHIFT                 0  /* AIF2DAC_EQ_B4_C - [15:0] */
-#define WM8994_AIF2DAC_EQ_B4_C_WIDTH                16  /* AIF2DAC_EQ_B4_C - [15:0] */
-
-/*
- * R1424 (0x590) - AIF2 EQ Band 4 PG
- */
-#define WM8994_AIF2DAC_EQ_B4_PG_MASK            0xFFFF  /* AIF2DAC_EQ_B4_PG - [15:0] */
-#define WM8994_AIF2DAC_EQ_B4_PG_SHIFT                0  /* AIF2DAC_EQ_B4_PG - [15:0] */
-#define WM8994_AIF2DAC_EQ_B4_PG_WIDTH               16  /* AIF2DAC_EQ_B4_PG - [15:0] */
-
-/*
- * R1425 (0x591) - AIF2 EQ Band 5 A
- */
-#define WM8994_AIF2DAC_EQ_B5_A_MASK             0xFFFF  /* AIF2DAC_EQ_B5_A - [15:0] */
-#define WM8994_AIF2DAC_EQ_B5_A_SHIFT                 0  /* AIF2DAC_EQ_B5_A - [15:0] */
-#define WM8994_AIF2DAC_EQ_B5_A_WIDTH                16  /* AIF2DAC_EQ_B5_A - [15:0] */
-
-/*
- * R1426 (0x592) - AIF2 EQ Band 5 B
- */
-#define WM8994_AIF2DAC_EQ_B5_B_MASK             0xFFFF  /* AIF2DAC_EQ_B5_B - [15:0] */
-#define WM8994_AIF2DAC_EQ_B5_B_SHIFT                 0  /* AIF2DAC_EQ_B5_B - [15:0] */
-#define WM8994_AIF2DAC_EQ_B5_B_WIDTH                16  /* AIF2DAC_EQ_B5_B - [15:0] */
-
-/*
- * R1427 (0x593) - AIF2 EQ Band 5 PG
- */
-#define WM8994_AIF2DAC_EQ_B5_PG_MASK            0xFFFF  /* AIF2DAC_EQ_B5_PG - [15:0] */
-#define WM8994_AIF2DAC_EQ_B5_PG_SHIFT                0  /* AIF2DAC_EQ_B5_PG - [15:0] */
-#define WM8994_AIF2DAC_EQ_B5_PG_WIDTH               16  /* AIF2DAC_EQ_B5_PG - [15:0] */
-
-/*
- * R1536 (0x600) - DAC1 Mixer Volumes
- */
-#define WM8994_ADCR_DAC1_VOL_MASK               0x01E0  /* ADCR_DAC1_VOL - [8:5] */
-#define WM8994_ADCR_DAC1_VOL_SHIFT                   5  /* ADCR_DAC1_VOL - [8:5] */
-#define WM8994_ADCR_DAC1_VOL_WIDTH                   4  /* ADCR_DAC1_VOL - [8:5] */
-#define WM8994_ADCL_DAC1_VOL_MASK               0x000F  /* ADCL_DAC1_VOL - [3:0] */
-#define WM8994_ADCL_DAC1_VOL_SHIFT                   0  /* ADCL_DAC1_VOL - [3:0] */
-#define WM8994_ADCL_DAC1_VOL_WIDTH                   4  /* ADCL_DAC1_VOL - [3:0] */
-
-/*
- * R1537 (0x601) - DAC1 Left Mixer Routing
- */
-#define WM8994_ADCR_TO_DAC1L                    0x0020  /* ADCR_TO_DAC1L */
-#define WM8994_ADCR_TO_DAC1L_MASK               0x0020  /* ADCR_TO_DAC1L */
-#define WM8994_ADCR_TO_DAC1L_SHIFT                   5  /* ADCR_TO_DAC1L */
-#define WM8994_ADCR_TO_DAC1L_WIDTH                   1  /* ADCR_TO_DAC1L */
-#define WM8994_ADCL_TO_DAC1L                    0x0010  /* ADCL_TO_DAC1L */
-#define WM8994_ADCL_TO_DAC1L_MASK               0x0010  /* ADCL_TO_DAC1L */
-#define WM8994_ADCL_TO_DAC1L_SHIFT                   4  /* ADCL_TO_DAC1L */
-#define WM8994_ADCL_TO_DAC1L_WIDTH                   1  /* ADCL_TO_DAC1L */
-#define WM8994_AIF2DACL_TO_DAC1L                0x0004  /* AIF2DACL_TO_DAC1L */
-#define WM8994_AIF2DACL_TO_DAC1L_MASK           0x0004  /* AIF2DACL_TO_DAC1L */
-#define WM8994_AIF2DACL_TO_DAC1L_SHIFT               2  /* AIF2DACL_TO_DAC1L */
-#define WM8994_AIF2DACL_TO_DAC1L_WIDTH               1  /* AIF2DACL_TO_DAC1L */
-#define WM8994_AIF1DAC2L_TO_DAC1L               0x0002  /* AIF1DAC2L_TO_DAC1L */
-#define WM8994_AIF1DAC2L_TO_DAC1L_MASK          0x0002  /* AIF1DAC2L_TO_DAC1L */
-#define WM8994_AIF1DAC2L_TO_DAC1L_SHIFT              1  /* AIF1DAC2L_TO_DAC1L */
-#define WM8994_AIF1DAC2L_TO_DAC1L_WIDTH              1  /* AIF1DAC2L_TO_DAC1L */
-#define WM8994_AIF1DAC1L_TO_DAC1L               0x0001  /* AIF1DAC1L_TO_DAC1L */
-#define WM8994_AIF1DAC1L_TO_DAC1L_MASK          0x0001  /* AIF1DAC1L_TO_DAC1L */
-#define WM8994_AIF1DAC1L_TO_DAC1L_SHIFT              0  /* AIF1DAC1L_TO_DAC1L */
-#define WM8994_AIF1DAC1L_TO_DAC1L_WIDTH              1  /* AIF1DAC1L_TO_DAC1L */
-
-/*
- * R1538 (0x602) - DAC1 Right Mixer Routing
- */
-#define WM8994_ADCR_TO_DAC1R                    0x0020  /* ADCR_TO_DAC1R */
-#define WM8994_ADCR_TO_DAC1R_MASK               0x0020  /* ADCR_TO_DAC1R */
-#define WM8994_ADCR_TO_DAC1R_SHIFT                   5  /* ADCR_TO_DAC1R */
-#define WM8994_ADCR_TO_DAC1R_WIDTH                   1  /* ADCR_TO_DAC1R */
-#define WM8994_ADCL_TO_DAC1R                    0x0010  /* ADCL_TO_DAC1R */
-#define WM8994_ADCL_TO_DAC1R_MASK               0x0010  /* ADCL_TO_DAC1R */
-#define WM8994_ADCL_TO_DAC1R_SHIFT                   4  /* ADCL_TO_DAC1R */
-#define WM8994_ADCL_TO_DAC1R_WIDTH                   1  /* ADCL_TO_DAC1R */
-#define WM8994_AIF2DACR_TO_DAC1R                0x0004  /* AIF2DACR_TO_DAC1R */
-#define WM8994_AIF2DACR_TO_DAC1R_MASK           0x0004  /* AIF2DACR_TO_DAC1R */
-#define WM8994_AIF2DACR_TO_DAC1R_SHIFT               2  /* AIF2DACR_TO_DAC1R */
-#define WM8994_AIF2DACR_TO_DAC1R_WIDTH               1  /* AIF2DACR_TO_DAC1R */
-#define WM8994_AIF1DAC2R_TO_DAC1R               0x0002  /* AIF1DAC2R_TO_DAC1R */
-#define WM8994_AIF1DAC2R_TO_DAC1R_MASK          0x0002  /* AIF1DAC2R_TO_DAC1R */
-#define WM8994_AIF1DAC2R_TO_DAC1R_SHIFT              1  /* AIF1DAC2R_TO_DAC1R */
-#define WM8994_AIF1DAC2R_TO_DAC1R_WIDTH              1  /* AIF1DAC2R_TO_DAC1R */
-#define WM8994_AIF1DAC1R_TO_DAC1R               0x0001  /* AIF1DAC1R_TO_DAC1R */
-#define WM8994_AIF1DAC1R_TO_DAC1R_MASK          0x0001  /* AIF1DAC1R_TO_DAC1R */
-#define WM8994_AIF1DAC1R_TO_DAC1R_SHIFT              0  /* AIF1DAC1R_TO_DAC1R */
-#define WM8994_AIF1DAC1R_TO_DAC1R_WIDTH              1  /* AIF1DAC1R_TO_DAC1R */
-
-/*
- * R1539 (0x603) - DAC2 Mixer Volumes
- */
-#define WM8994_ADCR_DAC2_VOL_MASK               0x01E0  /* ADCR_DAC2_VOL - [8:5] */
-#define WM8994_ADCR_DAC2_VOL_SHIFT                   5  /* ADCR_DAC2_VOL - [8:5] */
-#define WM8994_ADCR_DAC2_VOL_WIDTH                   4  /* ADCR_DAC2_VOL - [8:5] */
-#define WM8994_ADCL_DAC2_VOL_MASK               0x000F  /* ADCL_DAC2_VOL - [3:0] */
-#define WM8994_ADCL_DAC2_VOL_SHIFT                   0  /* ADCL_DAC2_VOL - [3:0] */
-#define WM8994_ADCL_DAC2_VOL_WIDTH                   4  /* ADCL_DAC2_VOL - [3:0] */
-
-/*
- * R1540 (0x604) - DAC2 Left Mixer Routing
- */
-#define WM8994_ADCR_TO_DAC2L                    0x0020  /* ADCR_TO_DAC2L */
-#define WM8994_ADCR_TO_DAC2L_MASK               0x0020  /* ADCR_TO_DAC2L */
-#define WM8994_ADCR_TO_DAC2L_SHIFT                   5  /* ADCR_TO_DAC2L */
-#define WM8994_ADCR_TO_DAC2L_WIDTH                   1  /* ADCR_TO_DAC2L */
-#define WM8994_ADCL_TO_DAC2L                    0x0010  /* ADCL_TO_DAC2L */
-#define WM8994_ADCL_TO_DAC2L_MASK               0x0010  /* ADCL_TO_DAC2L */
-#define WM8994_ADCL_TO_DAC2L_SHIFT                   4  /* ADCL_TO_DAC2L */
-#define WM8994_ADCL_TO_DAC2L_WIDTH                   1  /* ADCL_TO_DAC2L */
-#define WM8994_AIF2DACL_TO_DAC2L                0x0004  /* AIF2DACL_TO_DAC2L */
-#define WM8994_AIF2DACL_TO_DAC2L_MASK           0x0004  /* AIF2DACL_TO_DAC2L */
-#define WM8994_AIF2DACL_TO_DAC2L_SHIFT               2  /* AIF2DACL_TO_DAC2L */
-#define WM8994_AIF2DACL_TO_DAC2L_WIDTH               1  /* AIF2DACL_TO_DAC2L */
-#define WM8994_AIF1DAC2L_TO_DAC2L               0x0002  /* AIF1DAC2L_TO_DAC2L */
-#define WM8994_AIF1DAC2L_TO_DAC2L_MASK          0x0002  /* AIF1DAC2L_TO_DAC2L */
-#define WM8994_AIF1DAC2L_TO_DAC2L_SHIFT              1  /* AIF1DAC2L_TO_DAC2L */
-#define WM8994_AIF1DAC2L_TO_DAC2L_WIDTH              1  /* AIF1DAC2L_TO_DAC2L */
-#define WM8994_AIF1DAC1L_TO_DAC2L               0x0001  /* AIF1DAC1L_TO_DAC2L */
-#define WM8994_AIF1DAC1L_TO_DAC2L_MASK          0x0001  /* AIF1DAC1L_TO_DAC2L */
-#define WM8994_AIF1DAC1L_TO_DAC2L_SHIFT              0  /* AIF1DAC1L_TO_DAC2L */
-#define WM8994_AIF1DAC1L_TO_DAC2L_WIDTH              1  /* AIF1DAC1L_TO_DAC2L */
-
-/*
- * R1541 (0x605) - DAC2 Right Mixer Routing
- */
-#define WM8994_ADCR_TO_DAC2R                    0x0020  /* ADCR_TO_DAC2R */
-#define WM8994_ADCR_TO_DAC2R_MASK               0x0020  /* ADCR_TO_DAC2R */
-#define WM8994_ADCR_TO_DAC2R_SHIFT                   5  /* ADCR_TO_DAC2R */
-#define WM8994_ADCR_TO_DAC2R_WIDTH                   1  /* ADCR_TO_DAC2R */
-#define WM8994_ADCL_TO_DAC2R                    0x0010  /* ADCL_TO_DAC2R */
-#define WM8994_ADCL_TO_DAC2R_MASK               0x0010  /* ADCL_TO_DAC2R */
-#define WM8994_ADCL_TO_DAC2R_SHIFT                   4  /* ADCL_TO_DAC2R */
-#define WM8994_ADCL_TO_DAC2R_WIDTH                   1  /* ADCL_TO_DAC2R */
-#define WM8994_AIF2DACR_TO_DAC2R                0x0004  /* AIF2DACR_TO_DAC2R */
-#define WM8994_AIF2DACR_TO_DAC2R_MASK           0x0004  /* AIF2DACR_TO_DAC2R */
-#define WM8994_AIF2DACR_TO_DAC2R_SHIFT               2  /* AIF2DACR_TO_DAC2R */
-#define WM8994_AIF2DACR_TO_DAC2R_WIDTH               1  /* AIF2DACR_TO_DAC2R */
-#define WM8994_AIF1DAC2R_TO_DAC2R               0x0002  /* AIF1DAC2R_TO_DAC2R */
-#define WM8994_AIF1DAC2R_TO_DAC2R_MASK          0x0002  /* AIF1DAC2R_TO_DAC2R */
-#define WM8994_AIF1DAC2R_TO_DAC2R_SHIFT              1  /* AIF1DAC2R_TO_DAC2R */
-#define WM8994_AIF1DAC2R_TO_DAC2R_WIDTH              1  /* AIF1DAC2R_TO_DAC2R */
-#define WM8994_AIF1DAC1R_TO_DAC2R               0x0001  /* AIF1DAC1R_TO_DAC2R */
-#define WM8994_AIF1DAC1R_TO_DAC2R_MASK          0x0001  /* AIF1DAC1R_TO_DAC2R */
-#define WM8994_AIF1DAC1R_TO_DAC2R_SHIFT              0  /* AIF1DAC1R_TO_DAC2R */
-#define WM8994_AIF1DAC1R_TO_DAC2R_WIDTH              1  /* AIF1DAC1R_TO_DAC2R */
-
-/*
- * R1542 (0x606) - AIF1 ADC1 Left Mixer Routing
- */
-#define WM8994_ADC1L_TO_AIF1ADC1L               0x0002  /* ADC1L_TO_AIF1ADC1L */
-#define WM8994_ADC1L_TO_AIF1ADC1L_MASK          0x0002  /* ADC1L_TO_AIF1ADC1L */
-#define WM8994_ADC1L_TO_AIF1ADC1L_SHIFT              1  /* ADC1L_TO_AIF1ADC1L */
-#define WM8994_ADC1L_TO_AIF1ADC1L_WIDTH              1  /* ADC1L_TO_AIF1ADC1L */
-#define WM8994_AIF2DACL_TO_AIF1ADC1L            0x0001  /* AIF2DACL_TO_AIF1ADC1L */
-#define WM8994_AIF2DACL_TO_AIF1ADC1L_MASK       0x0001  /* AIF2DACL_TO_AIF1ADC1L */
-#define WM8994_AIF2DACL_TO_AIF1ADC1L_SHIFT           0  /* AIF2DACL_TO_AIF1ADC1L */
-#define WM8994_AIF2DACL_TO_AIF1ADC1L_WIDTH           1  /* AIF2DACL_TO_AIF1ADC1L */
-
-/*
- * R1543 (0x607) - AIF1 ADC1 Right Mixer Routing
- */
-#define WM8994_ADC1R_TO_AIF1ADC1R               0x0002  /* ADC1R_TO_AIF1ADC1R */
-#define WM8994_ADC1R_TO_AIF1ADC1R_MASK          0x0002  /* ADC1R_TO_AIF1ADC1R */
-#define WM8994_ADC1R_TO_AIF1ADC1R_SHIFT              1  /* ADC1R_TO_AIF1ADC1R */
-#define WM8994_ADC1R_TO_AIF1ADC1R_WIDTH              1  /* ADC1R_TO_AIF1ADC1R */
-#define WM8994_AIF2DACR_TO_AIF1ADC1R            0x0001  /* AIF2DACR_TO_AIF1ADC1R */
-#define WM8994_AIF2DACR_TO_AIF1ADC1R_MASK       0x0001  /* AIF2DACR_TO_AIF1ADC1R */
-#define WM8994_AIF2DACR_TO_AIF1ADC1R_SHIFT           0  /* AIF2DACR_TO_AIF1ADC1R */
-#define WM8994_AIF2DACR_TO_AIF1ADC1R_WIDTH           1  /* AIF2DACR_TO_AIF1ADC1R */
-
-/*
- * R1544 (0x608) - AIF1 ADC2 Left Mixer Routing
- */
-#define WM8994_ADC2L_TO_AIF1ADC2L               0x0002  /* ADC2L_TO_AIF1ADC2L */
-#define WM8994_ADC2L_TO_AIF1ADC2L_MASK          0x0002  /* ADC2L_TO_AIF1ADC2L */
-#define WM8994_ADC2L_TO_AIF1ADC2L_SHIFT              1  /* ADC2L_TO_AIF1ADC2L */
-#define WM8994_ADC2L_TO_AIF1ADC2L_WIDTH              1  /* ADC2L_TO_AIF1ADC2L */
-#define WM8994_AIF2DACL_TO_AIF1ADC2L            0x0001  /* AIF2DACL_TO_AIF1ADC2L */
-#define WM8994_AIF2DACL_TO_AIF1ADC2L_MASK       0x0001  /* AIF2DACL_TO_AIF1ADC2L */
-#define WM8994_AIF2DACL_TO_AIF1ADC2L_SHIFT           0  /* AIF2DACL_TO_AIF1ADC2L */
-#define WM8994_AIF2DACL_TO_AIF1ADC2L_WIDTH           1  /* AIF2DACL_TO_AIF1ADC2L */
-
-/*
- * R1545 (0x609) - AIF1 ADC2 Right mixer Routing
- */
-#define WM8994_ADC2R_TO_AIF1ADC2R               0x0002  /* ADC2R_TO_AIF1ADC2R */
-#define WM8994_ADC2R_TO_AIF1ADC2R_MASK          0x0002  /* ADC2R_TO_AIF1ADC2R */
-#define WM8994_ADC2R_TO_AIF1ADC2R_SHIFT              1  /* ADC2R_TO_AIF1ADC2R */
-#define WM8994_ADC2R_TO_AIF1ADC2R_WIDTH              1  /* ADC2R_TO_AIF1ADC2R */
-#define WM8994_AIF2DACR_TO_AIF1ADC2R            0x0001  /* AIF2DACR_TO_AIF1ADC2R */
-#define WM8994_AIF2DACR_TO_AIF1ADC2R_MASK       0x0001  /* AIF2DACR_TO_AIF1ADC2R */
-#define WM8994_AIF2DACR_TO_AIF1ADC2R_SHIFT           0  /* AIF2DACR_TO_AIF1ADC2R */
-#define WM8994_AIF2DACR_TO_AIF1ADC2R_WIDTH           1  /* AIF2DACR_TO_AIF1ADC2R */
-
-/*
- * R1552 (0x610) - DAC1 Left Volume
- */
-#define WM8994_DAC1L_MUTE                       0x0200  /* DAC1L_MUTE */
-#define WM8994_DAC1L_MUTE_MASK                  0x0200  /* DAC1L_MUTE */
-#define WM8994_DAC1L_MUTE_SHIFT                      9  /* DAC1L_MUTE */
-#define WM8994_DAC1L_MUTE_WIDTH                      1  /* DAC1L_MUTE */
-#define WM8994_DAC1_VU                          0x0100  /* DAC1_VU */
-#define WM8994_DAC1_VU_MASK                     0x0100  /* DAC1_VU */
-#define WM8994_DAC1_VU_SHIFT                         8  /* DAC1_VU */
-#define WM8994_DAC1_VU_WIDTH                         1  /* DAC1_VU */
-#define WM8994_DAC1L_VOL_MASK                   0x00FF  /* DAC1L_VOL - [7:0] */
-#define WM8994_DAC1L_VOL_SHIFT                       0  /* DAC1L_VOL - [7:0] */
-#define WM8994_DAC1L_VOL_WIDTH                       8  /* DAC1L_VOL - [7:0] */
-
-/*
- * R1553 (0x611) - DAC1 Right Volume
- */
-#define WM8994_DAC1R_MUTE                       0x0200  /* DAC1R_MUTE */
-#define WM8994_DAC1R_MUTE_MASK                  0x0200  /* DAC1R_MUTE */
-#define WM8994_DAC1R_MUTE_SHIFT                      9  /* DAC1R_MUTE */
-#define WM8994_DAC1R_MUTE_WIDTH                      1  /* DAC1R_MUTE */
-#define WM8994_DAC1_VU                          0x0100  /* DAC1_VU */
-#define WM8994_DAC1_VU_MASK                     0x0100  /* DAC1_VU */
-#define WM8994_DAC1_VU_SHIFT                         8  /* DAC1_VU */
-#define WM8994_DAC1_VU_WIDTH                         1  /* DAC1_VU */
-#define WM8994_DAC1R_VOL_MASK                   0x00FF  /* DAC1R_VOL - [7:0] */
-#define WM8994_DAC1R_VOL_SHIFT                       0  /* DAC1R_VOL - [7:0] */
-#define WM8994_DAC1R_VOL_WIDTH                       8  /* DAC1R_VOL - [7:0] */
-
-/*
- * R1554 (0x612) - DAC2 Left Volume
- */
-#define WM8994_DAC2L_MUTE                       0x0200  /* DAC2L_MUTE */
-#define WM8994_DAC2L_MUTE_MASK                  0x0200  /* DAC2L_MUTE */
-#define WM8994_DAC2L_MUTE_SHIFT                      9  /* DAC2L_MUTE */
-#define WM8994_DAC2L_MUTE_WIDTH                      1  /* DAC2L_MUTE */
-#define WM8994_DAC2_VU                          0x0100  /* DAC2_VU */
-#define WM8994_DAC2_VU_MASK                     0x0100  /* DAC2_VU */
-#define WM8994_DAC2_VU_SHIFT                         8  /* DAC2_VU */
-#define WM8994_DAC2_VU_WIDTH                         1  /* DAC2_VU */
-#define WM8994_DAC2L_VOL_MASK                   0x00FF  /* DAC2L_VOL - [7:0] */
-#define WM8994_DAC2L_VOL_SHIFT                       0  /* DAC2L_VOL - [7:0] */
-#define WM8994_DAC2L_VOL_WIDTH                       8  /* DAC2L_VOL - [7:0] */
-
-/*
- * R1555 (0x613) - DAC2 Right Volume
- */
-#define WM8994_DAC2R_MUTE                       0x0200  /* DAC2R_MUTE */
-#define WM8994_DAC2R_MUTE_MASK                  0x0200  /* DAC2R_MUTE */
-#define WM8994_DAC2R_MUTE_SHIFT                      9  /* DAC2R_MUTE */
-#define WM8994_DAC2R_MUTE_WIDTH                      1  /* DAC2R_MUTE */
-#define WM8994_DAC2_VU                          0x0100  /* DAC2_VU */
-#define WM8994_DAC2_VU_MASK                     0x0100  /* DAC2_VU */
-#define WM8994_DAC2_VU_SHIFT                         8  /* DAC2_VU */
-#define WM8994_DAC2_VU_WIDTH                         1  /* DAC2_VU */
-#define WM8994_DAC2R_VOL_MASK                   0x00FF  /* DAC2R_VOL - [7:0] */
-#define WM8994_DAC2R_VOL_SHIFT                       0  /* DAC2R_VOL - [7:0] */
-#define WM8994_DAC2R_VOL_WIDTH                       8  /* DAC2R_VOL - [7:0] */
-
-/*
- * R1556 (0x614) - DAC Softmute
- */
-#define WM8994_DAC_SOFTMUTEMODE                 0x0002  /* DAC_SOFTMUTEMODE */
-#define WM8994_DAC_SOFTMUTEMODE_MASK            0x0002  /* DAC_SOFTMUTEMODE */
-#define WM8994_DAC_SOFTMUTEMODE_SHIFT                1  /* DAC_SOFTMUTEMODE */
-#define WM8994_DAC_SOFTMUTEMODE_WIDTH                1  /* DAC_SOFTMUTEMODE */
-#define WM8994_DAC_MUTERATE                     0x0001  /* DAC_MUTERATE */
-#define WM8994_DAC_MUTERATE_MASK                0x0001  /* DAC_MUTERATE */
-#define WM8994_DAC_MUTERATE_SHIFT                    0  /* DAC_MUTERATE */
-#define WM8994_DAC_MUTERATE_WIDTH                    1  /* DAC_MUTERATE */
-
-/*
- * R1568 (0x620) - Oversampling
- */
-#define WM8994_ADC_OSR128                       0x0002  /* ADC_OSR128 */
-#define WM8994_ADC_OSR128_MASK                  0x0002  /* ADC_OSR128 */
-#define WM8994_ADC_OSR128_SHIFT                      1  /* ADC_OSR128 */
-#define WM8994_ADC_OSR128_WIDTH                      1  /* ADC_OSR128 */
-#define WM8994_DAC_OSR128                       0x0001  /* DAC_OSR128 */
-#define WM8994_DAC_OSR128_MASK                  0x0001  /* DAC_OSR128 */
-#define WM8994_DAC_OSR128_SHIFT                      0  /* DAC_OSR128 */
-#define WM8994_DAC_OSR128_WIDTH                      1  /* DAC_OSR128 */
-
-/*
- * R1569 (0x621) - Sidetone
- */
-#define WM8994_ST_HPF_CUT_MASK                  0x0380  /* ST_HPF_CUT - [9:7] */
-#define WM8994_ST_HPF_CUT_SHIFT                      7  /* ST_HPF_CUT - [9:7] */
-#define WM8994_ST_HPF_CUT_WIDTH                      3  /* ST_HPF_CUT - [9:7] */
-#define WM8994_ST_HPF                           0x0040  /* ST_HPF */
-#define WM8994_ST_HPF_MASK                      0x0040  /* ST_HPF */
-#define WM8994_ST_HPF_SHIFT                          6  /* ST_HPF */
-#define WM8994_ST_HPF_WIDTH                          1  /* ST_HPF */
-#define WM8994_STR_SEL                          0x0002  /* STR_SEL */
-#define WM8994_STR_SEL_MASK                     0x0002  /* STR_SEL */
-#define WM8994_STR_SEL_SHIFT                         1  /* STR_SEL */
-#define WM8994_STR_SEL_WIDTH                         1  /* STR_SEL */
-#define WM8994_STL_SEL                          0x0001  /* STL_SEL */
-#define WM8994_STL_SEL_MASK                     0x0001  /* STL_SEL */
-#define WM8994_STL_SEL_SHIFT                         0  /* STL_SEL */
-#define WM8994_STL_SEL_WIDTH                         1  /* STL_SEL */
-
-/*
- * R1797 (0x705) - JACKDET Ctrl
- */
-#define WM1811_JACKDET_DB                       0x0100  /* JACKDET_DB */
-#define WM1811_JACKDET_DB_MASK                  0x0100  /* JACKDET_DB */
-#define WM1811_JACKDET_DB_SHIFT                      8  /* JACKDET_DB */
-#define WM1811_JACKDET_DB_WIDTH                      1  /* JACKDET_DB */
-#define WM1811_JACKDET_LVL                      0x0040  /* JACKDET_LVL */
-#define WM1811_JACKDET_LVL_MASK                 0x0040  /* JACKDET_LVL */
-#define WM1811_JACKDET_LVL_SHIFT                     6  /* JACKDET_LVL */
-#define WM1811_JACKDET_LVL_WIDTH                     1  /* JACKDET_LVL */
-
-/*
- * R1824 (0x720) - Pull Control (1)
- */
-#define WM8994_DMICDAT2_PU                      0x0800  /* DMICDAT2_PU */
-#define WM8994_DMICDAT2_PU_MASK                 0x0800  /* DMICDAT2_PU */
-#define WM8994_DMICDAT2_PU_SHIFT                    11  /* DMICDAT2_PU */
-#define WM8994_DMICDAT2_PU_WIDTH                     1  /* DMICDAT2_PU */
-#define WM8994_DMICDAT2_PD                      0x0400  /* DMICDAT2_PD */
-#define WM8994_DMICDAT2_PD_MASK                 0x0400  /* DMICDAT2_PD */
-#define WM8994_DMICDAT2_PD_SHIFT                    10  /* DMICDAT2_PD */
-#define WM8994_DMICDAT2_PD_WIDTH                     1  /* DMICDAT2_PD */
-#define WM8994_DMICDAT1_PU                      0x0200  /* DMICDAT1_PU */
-#define WM8994_DMICDAT1_PU_MASK                 0x0200  /* DMICDAT1_PU */
-#define WM8994_DMICDAT1_PU_SHIFT                     9  /* DMICDAT1_PU */
-#define WM8994_DMICDAT1_PU_WIDTH                     1  /* DMICDAT1_PU */
-#define WM8994_DMICDAT1_PD                      0x0100  /* DMICDAT1_PD */
-#define WM8994_DMICDAT1_PD_MASK                 0x0100  /* DMICDAT1_PD */
-#define WM8994_DMICDAT1_PD_SHIFT                     8  /* DMICDAT1_PD */
-#define WM8994_DMICDAT1_PD_WIDTH                     1  /* DMICDAT1_PD */
-#define WM8994_MCLK1_PU                         0x0080  /* MCLK1_PU */
-#define WM8994_MCLK1_PU_MASK                    0x0080  /* MCLK1_PU */
-#define WM8994_MCLK1_PU_SHIFT                        7  /* MCLK1_PU */
-#define WM8994_MCLK1_PU_WIDTH                        1  /* MCLK1_PU */
-#define WM8994_MCLK1_PD                         0x0040  /* MCLK1_PD */
-#define WM8994_MCLK1_PD_MASK                    0x0040  /* MCLK1_PD */
-#define WM8994_MCLK1_PD_SHIFT                        6  /* MCLK1_PD */
-#define WM8994_MCLK1_PD_WIDTH                        1  /* MCLK1_PD */
-#define WM8994_DACDAT1_PU                       0x0020  /* DACDAT1_PU */
-#define WM8994_DACDAT1_PU_MASK                  0x0020  /* DACDAT1_PU */
-#define WM8994_DACDAT1_PU_SHIFT                      5  /* DACDAT1_PU */
-#define WM8994_DACDAT1_PU_WIDTH                      1  /* DACDAT1_PU */
-#define WM8994_DACDAT1_PD                       0x0010  /* DACDAT1_PD */
-#define WM8994_DACDAT1_PD_MASK                  0x0010  /* DACDAT1_PD */
-#define WM8994_DACDAT1_PD_SHIFT                      4  /* DACDAT1_PD */
-#define WM8994_DACDAT1_PD_WIDTH                      1  /* DACDAT1_PD */
-#define WM8994_DACLRCLK1_PU                     0x0008  /* DACLRCLK1_PU */
-#define WM8994_DACLRCLK1_PU_MASK                0x0008  /* DACLRCLK1_PU */
-#define WM8994_DACLRCLK1_PU_SHIFT                    3  /* DACLRCLK1_PU */
-#define WM8994_DACLRCLK1_PU_WIDTH                    1  /* DACLRCLK1_PU */
-#define WM8994_DACLRCLK1_PD                     0x0004  /* DACLRCLK1_PD */
-#define WM8994_DACLRCLK1_PD_MASK                0x0004  /* DACLRCLK1_PD */
-#define WM8994_DACLRCLK1_PD_SHIFT                    2  /* DACLRCLK1_PD */
-#define WM8994_DACLRCLK1_PD_WIDTH                    1  /* DACLRCLK1_PD */
-#define WM8994_BCLK1_PU                         0x0002  /* BCLK1_PU */
-#define WM8994_BCLK1_PU_MASK                    0x0002  /* BCLK1_PU */
-#define WM8994_BCLK1_PU_SHIFT                        1  /* BCLK1_PU */
-#define WM8994_BCLK1_PU_WIDTH                        1  /* BCLK1_PU */
-#define WM8994_BCLK1_PD                         0x0001  /* BCLK1_PD */
-#define WM8994_BCLK1_PD_MASK                    0x0001  /* BCLK1_PD */
-#define WM8994_BCLK1_PD_SHIFT                        0  /* BCLK1_PD */
-#define WM8994_BCLK1_PD_WIDTH                        1  /* BCLK1_PD */
-
-/*
- * R1825 (0x721) - Pull Control (2)
- */
-#define WM8994_CSNADDR_PD                       0x0100  /* CSNADDR_PD */
-#define WM8994_CSNADDR_PD_MASK                  0x0100  /* CSNADDR_PD */
-#define WM8994_CSNADDR_PD_SHIFT                      8  /* CSNADDR_PD */
-#define WM8994_CSNADDR_PD_WIDTH                      1  /* CSNADDR_PD */
-#define WM8994_LDO2ENA_PD                       0x0040  /* LDO2ENA_PD */
-#define WM8994_LDO2ENA_PD_MASK                  0x0040  /* LDO2ENA_PD */
-#define WM8994_LDO2ENA_PD_SHIFT                      6  /* LDO2ENA_PD */
-#define WM8994_LDO2ENA_PD_WIDTH                      1  /* LDO2ENA_PD */
-#define WM8994_LDO1ENA_PD                       0x0010  /* LDO1ENA_PD */
-#define WM8994_LDO1ENA_PD_MASK                  0x0010  /* LDO1ENA_PD */
-#define WM8994_LDO1ENA_PD_SHIFT                      4  /* LDO1ENA_PD */
-#define WM8994_LDO1ENA_PD_WIDTH                      1  /* LDO1ENA_PD */
-#define WM8994_CIFMODE_PD                       0x0004  /* CIFMODE_PD */
-#define WM8994_CIFMODE_PD_MASK                  0x0004  /* CIFMODE_PD */
-#define WM8994_CIFMODE_PD_SHIFT                      2  /* CIFMODE_PD */
-#define WM8994_CIFMODE_PD_WIDTH                      1  /* CIFMODE_PD */
-#define WM8994_SPKMODE_PU                       0x0002  /* SPKMODE_PU */
-#define WM8994_SPKMODE_PU_MASK                  0x0002  /* SPKMODE_PU */
-#define WM8994_SPKMODE_PU_SHIFT                      1  /* SPKMODE_PU */
-#define WM8994_SPKMODE_PU_WIDTH                      1  /* SPKMODE_PU */
-
-/*
- * R1840 (0x730) - Interrupt Status 1
- */
-#define WM8994_GP11_EINT                        0x0400  /* GP11_EINT */
-#define WM8994_GP11_EINT_MASK                   0x0400  /* GP11_EINT */
-#define WM8994_GP11_EINT_SHIFT                      10  /* GP11_EINT */
-#define WM8994_GP11_EINT_WIDTH                       1  /* GP11_EINT */
-#define WM8994_GP10_EINT                        0x0200  /* GP10_EINT */
-#define WM8994_GP10_EINT_MASK                   0x0200  /* GP10_EINT */
-#define WM8994_GP10_EINT_SHIFT                       9  /* GP10_EINT */
-#define WM8994_GP10_EINT_WIDTH                       1  /* GP10_EINT */
-#define WM8994_GP9_EINT                         0x0100  /* GP9_EINT */
-#define WM8994_GP9_EINT_MASK                    0x0100  /* GP9_EINT */
-#define WM8994_GP9_EINT_SHIFT                        8  /* GP9_EINT */
-#define WM8994_GP9_EINT_WIDTH                        1  /* GP9_EINT */
-#define WM8994_GP8_EINT                         0x0080  /* GP8_EINT */
-#define WM8994_GP8_EINT_MASK                    0x0080  /* GP8_EINT */
-#define WM8994_GP8_EINT_SHIFT                        7  /* GP8_EINT */
-#define WM8994_GP8_EINT_WIDTH                        1  /* GP8_EINT */
-#define WM8994_GP7_EINT                         0x0040  /* GP7_EINT */
-#define WM8994_GP7_EINT_MASK                    0x0040  /* GP7_EINT */
-#define WM8994_GP7_EINT_SHIFT                        6  /* GP7_EINT */
-#define WM8994_GP7_EINT_WIDTH                        1  /* GP7_EINT */
-#define WM8994_GP6_EINT                         0x0020  /* GP6_EINT */
-#define WM8994_GP6_EINT_MASK                    0x0020  /* GP6_EINT */
-#define WM8994_GP6_EINT_SHIFT                        5  /* GP6_EINT */
-#define WM8994_GP6_EINT_WIDTH                        1  /* GP6_EINT */
-#define WM8994_GP5_EINT                         0x0010  /* GP5_EINT */
-#define WM8994_GP5_EINT_MASK                    0x0010  /* GP5_EINT */
-#define WM8994_GP5_EINT_SHIFT                        4  /* GP5_EINT */
-#define WM8994_GP5_EINT_WIDTH                        1  /* GP5_EINT */
-#define WM8994_GP4_EINT                         0x0008  /* GP4_EINT */
-#define WM8994_GP4_EINT_MASK                    0x0008  /* GP4_EINT */
-#define WM8994_GP4_EINT_SHIFT                        3  /* GP4_EINT */
-#define WM8994_GP4_EINT_WIDTH                        1  /* GP4_EINT */
-#define WM8994_GP3_EINT                         0x0004  /* GP3_EINT */
-#define WM8994_GP3_EINT_MASK                    0x0004  /* GP3_EINT */
-#define WM8994_GP3_EINT_SHIFT                        2  /* GP3_EINT */
-#define WM8994_GP3_EINT_WIDTH                        1  /* GP3_EINT */
-#define WM8994_GP2_EINT                         0x0002  /* GP2_EINT */
-#define WM8994_GP2_EINT_MASK                    0x0002  /* GP2_EINT */
-#define WM8994_GP2_EINT_SHIFT                        1  /* GP2_EINT */
-#define WM8994_GP2_EINT_WIDTH                        1  /* GP2_EINT */
-#define WM8994_GP1_EINT                         0x0001  /* GP1_EINT */
-#define WM8994_GP1_EINT_MASK                    0x0001  /* GP1_EINT */
-#define WM8994_GP1_EINT_SHIFT                        0  /* GP1_EINT */
-#define WM8994_GP1_EINT_WIDTH                        1  /* GP1_EINT */
-
-/*
- * R1841 (0x731) - Interrupt Status 2
- */
-#define WM8994_TEMP_WARN_EINT                   0x8000  /* TEMP_WARN_EINT */
-#define WM8994_TEMP_WARN_EINT_MASK              0x8000  /* TEMP_WARN_EINT */
-#define WM8994_TEMP_WARN_EINT_SHIFT                 15  /* TEMP_WARN_EINT */
-#define WM8994_TEMP_WARN_EINT_WIDTH                  1  /* TEMP_WARN_EINT */
-#define WM8994_DCS_DONE_EINT                    0x4000  /* DCS_DONE_EINT */
-#define WM8994_DCS_DONE_EINT_MASK               0x4000  /* DCS_DONE_EINT */
-#define WM8994_DCS_DONE_EINT_SHIFT                  14  /* DCS_DONE_EINT */
-#define WM8994_DCS_DONE_EINT_WIDTH                   1  /* DCS_DONE_EINT */
-#define WM8994_WSEQ_DONE_EINT                   0x2000  /* WSEQ_DONE_EINT */
-#define WM8994_WSEQ_DONE_EINT_MASK              0x2000  /* WSEQ_DONE_EINT */
-#define WM8994_WSEQ_DONE_EINT_SHIFT                 13  /* WSEQ_DONE_EINT */
-#define WM8994_WSEQ_DONE_EINT_WIDTH                  1  /* WSEQ_DONE_EINT */
-#define WM8994_FIFOS_ERR_EINT                   0x1000  /* FIFOS_ERR_EINT */
-#define WM8994_FIFOS_ERR_EINT_MASK              0x1000  /* FIFOS_ERR_EINT */
-#define WM8994_FIFOS_ERR_EINT_SHIFT                 12  /* FIFOS_ERR_EINT */
-#define WM8994_FIFOS_ERR_EINT_WIDTH                  1  /* FIFOS_ERR_EINT */
-#define WM8994_AIF2DRC_SIG_DET_EINT             0x0800  /* AIF2DRC_SIG_DET_EINT */
-#define WM8994_AIF2DRC_SIG_DET_EINT_MASK        0x0800  /* AIF2DRC_SIG_DET_EINT */
-#define WM8994_AIF2DRC_SIG_DET_EINT_SHIFT           11  /* AIF2DRC_SIG_DET_EINT */
-#define WM8994_AIF2DRC_SIG_DET_EINT_WIDTH            1  /* AIF2DRC_SIG_DET_EINT */
-#define WM8994_AIF1DRC2_SIG_DET_EINT            0x0400  /* AIF1DRC2_SIG_DET_EINT */
-#define WM8994_AIF1DRC2_SIG_DET_EINT_MASK       0x0400  /* AIF1DRC2_SIG_DET_EINT */
-#define WM8994_AIF1DRC2_SIG_DET_EINT_SHIFT          10  /* AIF1DRC2_SIG_DET_EINT */
-#define WM8994_AIF1DRC2_SIG_DET_EINT_WIDTH           1  /* AIF1DRC2_SIG_DET_EINT */
-#define WM8994_AIF1DRC1_SIG_DET_EINT            0x0200  /* AIF1DRC1_SIG_DET_EINT */
-#define WM8994_AIF1DRC1_SIG_DET_EINT_MASK       0x0200  /* AIF1DRC1_SIG_DET_EINT */
-#define WM8994_AIF1DRC1_SIG_DET_EINT_SHIFT           9  /* AIF1DRC1_SIG_DET_EINT */
-#define WM8994_AIF1DRC1_SIG_DET_EINT_WIDTH           1  /* AIF1DRC1_SIG_DET_EINT */
-#define WM8994_SRC2_LOCK_EINT                   0x0100  /* SRC2_LOCK_EINT */
-#define WM8994_SRC2_LOCK_EINT_MASK              0x0100  /* SRC2_LOCK_EINT */
-#define WM8994_SRC2_LOCK_EINT_SHIFT                  8  /* SRC2_LOCK_EINT */
-#define WM8994_SRC2_LOCK_EINT_WIDTH                  1  /* SRC2_LOCK_EINT */
-#define WM8994_SRC1_LOCK_EINT                   0x0080  /* SRC1_LOCK_EINT */
-#define WM8994_SRC1_LOCK_EINT_MASK              0x0080  /* SRC1_LOCK_EINT */
-#define WM8994_SRC1_LOCK_EINT_SHIFT                  7  /* SRC1_LOCK_EINT */
-#define WM8994_SRC1_LOCK_EINT_WIDTH                  1  /* SRC1_LOCK_EINT */
-#define WM8994_FLL2_LOCK_EINT                   0x0040  /* FLL2_LOCK_EINT */
-#define WM8994_FLL2_LOCK_EINT_MASK              0x0040  /* FLL2_LOCK_EINT */
-#define WM8994_FLL2_LOCK_EINT_SHIFT                  6  /* FLL2_LOCK_EINT */
-#define WM8994_FLL2_LOCK_EINT_WIDTH                  1  /* FLL2_LOCK_EINT */
-#define WM8994_FLL1_LOCK_EINT                   0x0020  /* FLL1_LOCK_EINT */
-#define WM8994_FLL1_LOCK_EINT_MASK              0x0020  /* FLL1_LOCK_EINT */
-#define WM8994_FLL1_LOCK_EINT_SHIFT                  5  /* FLL1_LOCK_EINT */
-#define WM8994_FLL1_LOCK_EINT_WIDTH                  1  /* FLL1_LOCK_EINT */
-#define WM8994_MIC2_SHRT_EINT                   0x0010  /* MIC2_SHRT_EINT */
-#define WM8994_MIC2_SHRT_EINT_MASK              0x0010  /* MIC2_SHRT_EINT */
-#define WM8994_MIC2_SHRT_EINT_SHIFT                  4  /* MIC2_SHRT_EINT */
-#define WM8994_MIC2_SHRT_EINT_WIDTH                  1  /* MIC2_SHRT_EINT */
-#define WM8994_MIC2_DET_EINT                    0x0008  /* MIC2_DET_EINT */
-#define WM8994_MIC2_DET_EINT_MASK               0x0008  /* MIC2_DET_EINT */
-#define WM8994_MIC2_DET_EINT_SHIFT                   3  /* MIC2_DET_EINT */
-#define WM8994_MIC2_DET_EINT_WIDTH                   1  /* MIC2_DET_EINT */
-#define WM8994_MIC1_SHRT_EINT                   0x0004  /* MIC1_SHRT_EINT */
-#define WM8994_MIC1_SHRT_EINT_MASK              0x0004  /* MIC1_SHRT_EINT */
-#define WM8994_MIC1_SHRT_EINT_SHIFT                  2  /* MIC1_SHRT_EINT */
-#define WM8994_MIC1_SHRT_EINT_WIDTH                  1  /* MIC1_SHRT_EINT */
-#define WM8994_MIC1_DET_EINT                    0x0002  /* MIC1_DET_EINT */
-#define WM8994_MIC1_DET_EINT_MASK               0x0002  /* MIC1_DET_EINT */
-#define WM8994_MIC1_DET_EINT_SHIFT                   1  /* MIC1_DET_EINT */
-#define WM8994_MIC1_DET_EINT_WIDTH                   1  /* MIC1_DET_EINT */
-#define WM8994_TEMP_SHUT_EINT                   0x0001  /* TEMP_SHUT_EINT */
-#define WM8994_TEMP_SHUT_EINT_MASK              0x0001  /* TEMP_SHUT_EINT */
-#define WM8994_TEMP_SHUT_EINT_SHIFT                  0  /* TEMP_SHUT_EINT */
-#define WM8994_TEMP_SHUT_EINT_WIDTH                  1  /* TEMP_SHUT_EINT */
-
-/*
- * R1842 (0x732) - Interrupt Raw Status 2
- */
-#define WM8994_TEMP_WARN_STS                    0x8000  /* TEMP_WARN_STS */
-#define WM8994_TEMP_WARN_STS_MASK               0x8000  /* TEMP_WARN_STS */
-#define WM8994_TEMP_WARN_STS_SHIFT                  15  /* TEMP_WARN_STS */
-#define WM8994_TEMP_WARN_STS_WIDTH                   1  /* TEMP_WARN_STS */
-#define WM8994_DCS_DONE_STS                     0x4000  /* DCS_DONE_STS */
-#define WM8994_DCS_DONE_STS_MASK                0x4000  /* DCS_DONE_STS */
-#define WM8994_DCS_DONE_STS_SHIFT                   14  /* DCS_DONE_STS */
-#define WM8994_DCS_DONE_STS_WIDTH                    1  /* DCS_DONE_STS */
-#define WM8994_WSEQ_DONE_STS                    0x2000  /* WSEQ_DONE_STS */
-#define WM8994_WSEQ_DONE_STS_MASK               0x2000  /* WSEQ_DONE_STS */
-#define WM8994_WSEQ_DONE_STS_SHIFT                  13  /* WSEQ_DONE_STS */
-#define WM8994_WSEQ_DONE_STS_WIDTH                   1  /* WSEQ_DONE_STS */
-#define WM8994_FIFOS_ERR_STS                    0x1000  /* FIFOS_ERR_STS */
-#define WM8994_FIFOS_ERR_STS_MASK               0x1000  /* FIFOS_ERR_STS */
-#define WM8994_FIFOS_ERR_STS_SHIFT                  12  /* FIFOS_ERR_STS */
-#define WM8994_FIFOS_ERR_STS_WIDTH                   1  /* FIFOS_ERR_STS */
-#define WM8994_AIF2DRC_SIG_DET_STS              0x0800  /* AIF2DRC_SIG_DET_STS */
-#define WM8994_AIF2DRC_SIG_DET_STS_MASK         0x0800  /* AIF2DRC_SIG_DET_STS */
-#define WM8994_AIF2DRC_SIG_DET_STS_SHIFT            11  /* AIF2DRC_SIG_DET_STS */
-#define WM8994_AIF2DRC_SIG_DET_STS_WIDTH             1  /* AIF2DRC_SIG_DET_STS */
-#define WM8994_AIF1DRC2_SIG_DET_STS             0x0400  /* AIF1DRC2_SIG_DET_STS */
-#define WM8994_AIF1DRC2_SIG_DET_STS_MASK        0x0400  /* AIF1DRC2_SIG_DET_STS */
-#define WM8994_AIF1DRC2_SIG_DET_STS_SHIFT           10  /* AIF1DRC2_SIG_DET_STS */
-#define WM8994_AIF1DRC2_SIG_DET_STS_WIDTH            1  /* AIF1DRC2_SIG_DET_STS */
-#define WM8994_AIF1DRC1_SIG_DET_STS             0x0200  /* AIF1DRC1_SIG_DET_STS */
-#define WM8994_AIF1DRC1_SIG_DET_STS_MASK        0x0200  /* AIF1DRC1_SIG_DET_STS */
-#define WM8994_AIF1DRC1_SIG_DET_STS_SHIFT            9  /* AIF1DRC1_SIG_DET_STS */
-#define WM8994_AIF1DRC1_SIG_DET_STS_WIDTH            1  /* AIF1DRC1_SIG_DET_STS */
-#define WM8994_SRC2_LOCK_STS                    0x0100  /* SRC2_LOCK_STS */
-#define WM8994_SRC2_LOCK_STS_MASK               0x0100  /* SRC2_LOCK_STS */
-#define WM8994_SRC2_LOCK_STS_SHIFT                   8  /* SRC2_LOCK_STS */
-#define WM8994_SRC2_LOCK_STS_WIDTH                   1  /* SRC2_LOCK_STS */
-#define WM8994_SRC1_LOCK_STS                    0x0080  /* SRC1_LOCK_STS */
-#define WM8994_SRC1_LOCK_STS_MASK               0x0080  /* SRC1_LOCK_STS */
-#define WM8994_SRC1_LOCK_STS_SHIFT                   7  /* SRC1_LOCK_STS */
-#define WM8994_SRC1_LOCK_STS_WIDTH                   1  /* SRC1_LOCK_STS */
-#define WM8994_FLL2_LOCK_STS                    0x0040  /* FLL2_LOCK_STS */
-#define WM8994_FLL2_LOCK_STS_MASK               0x0040  /* FLL2_LOCK_STS */
-#define WM8994_FLL2_LOCK_STS_SHIFT                   6  /* FLL2_LOCK_STS */
-#define WM8994_FLL2_LOCK_STS_WIDTH                   1  /* FLL2_LOCK_STS */
-#define WM8994_FLL1_LOCK_STS                    0x0020  /* FLL1_LOCK_STS */
-#define WM8994_FLL1_LOCK_STS_MASK               0x0020  /* FLL1_LOCK_STS */
-#define WM8994_FLL1_LOCK_STS_SHIFT                   5  /* FLL1_LOCK_STS */
-#define WM8994_FLL1_LOCK_STS_WIDTH                   1  /* FLL1_LOCK_STS */
-#define WM8994_MIC2_SHRT_STS                    0x0010  /* MIC2_SHRT_STS */
-#define WM8994_MIC2_SHRT_STS_MASK               0x0010  /* MIC2_SHRT_STS */
-#define WM8994_MIC2_SHRT_STS_SHIFT                   4  /* MIC2_SHRT_STS */
-#define WM8994_MIC2_SHRT_STS_WIDTH                   1  /* MIC2_SHRT_STS */
-#define WM8994_MIC2_DET_STS                     0x0008  /* MIC2_DET_STS */
-#define WM8994_MIC2_DET_STS_MASK                0x0008  /* MIC2_DET_STS */
-#define WM8994_MIC2_DET_STS_SHIFT                    3  /* MIC2_DET_STS */
-#define WM8994_MIC2_DET_STS_WIDTH                    1  /* MIC2_DET_STS */
-#define WM8994_MIC1_SHRT_STS                    0x0004  /* MIC1_SHRT_STS */
-#define WM8994_MIC1_SHRT_STS_MASK               0x0004  /* MIC1_SHRT_STS */
-#define WM8994_MIC1_SHRT_STS_SHIFT                   2  /* MIC1_SHRT_STS */
-#define WM8994_MIC1_SHRT_STS_WIDTH                   1  /* MIC1_SHRT_STS */
-#define WM8994_MIC1_DET_STS                     0x0002  /* MIC1_DET_STS */
-#define WM8994_MIC1_DET_STS_MASK                0x0002  /* MIC1_DET_STS */
-#define WM8994_MIC1_DET_STS_SHIFT                    1  /* MIC1_DET_STS */
-#define WM8994_MIC1_DET_STS_WIDTH                    1  /* MIC1_DET_STS */
-#define WM8994_TEMP_SHUT_STS                    0x0001  /* TEMP_SHUT_STS */
-#define WM8994_TEMP_SHUT_STS_MASK               0x0001  /* TEMP_SHUT_STS */
-#define WM8994_TEMP_SHUT_STS_SHIFT                   0  /* TEMP_SHUT_STS */
-#define WM8994_TEMP_SHUT_STS_WIDTH                   1  /* TEMP_SHUT_STS */
-
-/*
- * R1848 (0x738) - Interrupt Status 1 Mask
- */
-#define WM8994_IM_GP11_EINT                     0x0400  /* IM_GP11_EINT */
-#define WM8994_IM_GP11_EINT_MASK                0x0400  /* IM_GP11_EINT */
-#define WM8994_IM_GP11_EINT_SHIFT                   10  /* IM_GP11_EINT */
-#define WM8994_IM_GP11_EINT_WIDTH                    1  /* IM_GP11_EINT */
-#define WM8994_IM_GP10_EINT                     0x0200  /* IM_GP10_EINT */
-#define WM8994_IM_GP10_EINT_MASK                0x0200  /* IM_GP10_EINT */
-#define WM8994_IM_GP10_EINT_SHIFT                    9  /* IM_GP10_EINT */
-#define WM8994_IM_GP10_EINT_WIDTH                    1  /* IM_GP10_EINT */
-#define WM8994_IM_GP9_EINT                      0x0100  /* IM_GP9_EINT */
-#define WM8994_IM_GP9_EINT_MASK                 0x0100  /* IM_GP9_EINT */
-#define WM8994_IM_GP9_EINT_SHIFT                     8  /* IM_GP9_EINT */
-#define WM8994_IM_GP9_EINT_WIDTH                     1  /* IM_GP9_EINT */
-#define WM8994_IM_GP8_EINT                      0x0080  /* IM_GP8_EINT */
-#define WM8994_IM_GP8_EINT_MASK                 0x0080  /* IM_GP8_EINT */
-#define WM8994_IM_GP8_EINT_SHIFT                     7  /* IM_GP8_EINT */
-#define WM8994_IM_GP8_EINT_WIDTH                     1  /* IM_GP8_EINT */
-#define WM8994_IM_GP7_EINT                      0x0040  /* IM_GP7_EINT */
-#define WM8994_IM_GP7_EINT_MASK                 0x0040  /* IM_GP7_EINT */
-#define WM8994_IM_GP7_EINT_SHIFT                     6  /* IM_GP7_EINT */
-#define WM8994_IM_GP7_EINT_WIDTH                     1  /* IM_GP7_EINT */
-#define WM8994_IM_GP6_EINT                      0x0020  /* IM_GP6_EINT */
-#define WM8994_IM_GP6_EINT_MASK                 0x0020  /* IM_GP6_EINT */
-#define WM8994_IM_GP6_EINT_SHIFT                     5  /* IM_GP6_EINT */
-#define WM8994_IM_GP6_EINT_WIDTH                     1  /* IM_GP6_EINT */
-#define WM8994_IM_GP5_EINT                      0x0010  /* IM_GP5_EINT */
-#define WM8994_IM_GP5_EINT_MASK                 0x0010  /* IM_GP5_EINT */
-#define WM8994_IM_GP5_EINT_SHIFT                     4  /* IM_GP5_EINT */
-#define WM8994_IM_GP5_EINT_WIDTH                     1  /* IM_GP5_EINT */
-#define WM8994_IM_GP4_EINT                      0x0008  /* IM_GP4_EINT */
-#define WM8994_IM_GP4_EINT_MASK                 0x0008  /* IM_GP4_EINT */
-#define WM8994_IM_GP4_EINT_SHIFT                     3  /* IM_GP4_EINT */
-#define WM8994_IM_GP4_EINT_WIDTH                     1  /* IM_GP4_EINT */
-#define WM8994_IM_GP3_EINT                      0x0004  /* IM_GP3_EINT */
-#define WM8994_IM_GP3_EINT_MASK                 0x0004  /* IM_GP3_EINT */
-#define WM8994_IM_GP3_EINT_SHIFT                     2  /* IM_GP3_EINT */
-#define WM8994_IM_GP3_EINT_WIDTH                     1  /* IM_GP3_EINT */
-#define WM8994_IM_GP2_EINT                      0x0002  /* IM_GP2_EINT */
-#define WM8994_IM_GP2_EINT_MASK                 0x0002  /* IM_GP2_EINT */
-#define WM8994_IM_GP2_EINT_SHIFT                     1  /* IM_GP2_EINT */
-#define WM8994_IM_GP2_EINT_WIDTH                     1  /* IM_GP2_EINT */
-#define WM8994_IM_GP1_EINT                      0x0001  /* IM_GP1_EINT */
-#define WM8994_IM_GP1_EINT_MASK                 0x0001  /* IM_GP1_EINT */
-#define WM8994_IM_GP1_EINT_SHIFT                     0  /* IM_GP1_EINT */
-#define WM8994_IM_GP1_EINT_WIDTH                     1  /* IM_GP1_EINT */
-
-/*
- * R1849 (0x739) - Interrupt Status 2 Mask
- */
-#define WM8994_IM_TEMP_WARN_EINT                0x8000  /* IM_TEMP_WARN_EINT */
-#define WM8994_IM_TEMP_WARN_EINT_MASK           0x8000  /* IM_TEMP_WARN_EINT */
-#define WM8994_IM_TEMP_WARN_EINT_SHIFT              15  /* IM_TEMP_WARN_EINT */
-#define WM8994_IM_TEMP_WARN_EINT_WIDTH               1  /* IM_TEMP_WARN_EINT */
-#define WM8994_IM_DCS_DONE_EINT                 0x4000  /* IM_DCS_DONE_EINT */
-#define WM8994_IM_DCS_DONE_EINT_MASK            0x4000  /* IM_DCS_DONE_EINT */
-#define WM8994_IM_DCS_DONE_EINT_SHIFT               14  /* IM_DCS_DONE_EINT */
-#define WM8994_IM_DCS_DONE_EINT_WIDTH                1  /* IM_DCS_DONE_EINT */
-#define WM8994_IM_WSEQ_DONE_EINT                0x2000  /* IM_WSEQ_DONE_EINT */
-#define WM8994_IM_WSEQ_DONE_EINT_MASK           0x2000  /* IM_WSEQ_DONE_EINT */
-#define WM8994_IM_WSEQ_DONE_EINT_SHIFT              13  /* IM_WSEQ_DONE_EINT */
-#define WM8994_IM_WSEQ_DONE_EINT_WIDTH               1  /* IM_WSEQ_DONE_EINT */
-#define WM8994_IM_FIFOS_ERR_EINT                0x1000  /* IM_FIFOS_ERR_EINT */
-#define WM8994_IM_FIFOS_ERR_EINT_MASK           0x1000  /* IM_FIFOS_ERR_EINT */
-#define WM8994_IM_FIFOS_ERR_EINT_SHIFT              12  /* IM_FIFOS_ERR_EINT */
-#define WM8994_IM_FIFOS_ERR_EINT_WIDTH               1  /* IM_FIFOS_ERR_EINT */
-#define WM8994_IM_AIF2DRC_SIG_DET_EINT          0x0800  /* IM_AIF2DRC_SIG_DET_EINT */
-#define WM8994_IM_AIF2DRC_SIG_DET_EINT_MASK     0x0800  /* IM_AIF2DRC_SIG_DET_EINT */
-#define WM8994_IM_AIF2DRC_SIG_DET_EINT_SHIFT        11  /* IM_AIF2DRC_SIG_DET_EINT */
-#define WM8994_IM_AIF2DRC_SIG_DET_EINT_WIDTH         1  /* IM_AIF2DRC_SIG_DET_EINT */
-#define WM8994_IM_AIF1DRC2_SIG_DET_EINT         0x0400  /* IM_AIF1DRC2_SIG_DET_EINT */
-#define WM8994_IM_AIF1DRC2_SIG_DET_EINT_MASK    0x0400  /* IM_AIF1DRC2_SIG_DET_EINT */
-#define WM8994_IM_AIF1DRC2_SIG_DET_EINT_SHIFT       10  /* IM_AIF1DRC2_SIG_DET_EINT */
-#define WM8994_IM_AIF1DRC2_SIG_DET_EINT_WIDTH        1  /* IM_AIF1DRC2_SIG_DET_EINT */
-#define WM8994_IM_AIF1DRC1_SIG_DET_EINT         0x0200  /* IM_AIF1DRC1_SIG_DET_EINT */
-#define WM8994_IM_AIF1DRC1_SIG_DET_EINT_MASK    0x0200  /* IM_AIF1DRC1_SIG_DET_EINT */
-#define WM8994_IM_AIF1DRC1_SIG_DET_EINT_SHIFT        9  /* IM_AIF1DRC1_SIG_DET_EINT */
-#define WM8994_IM_AIF1DRC1_SIG_DET_EINT_WIDTH        1  /* IM_AIF1DRC1_SIG_DET_EINT */
-#define WM8994_IM_SRC2_LOCK_EINT                0x0100  /* IM_SRC2_LOCK_EINT */
-#define WM8994_IM_SRC2_LOCK_EINT_MASK           0x0100  /* IM_SRC2_LOCK_EINT */
-#define WM8994_IM_SRC2_LOCK_EINT_SHIFT               8  /* IM_SRC2_LOCK_EINT */
-#define WM8994_IM_SRC2_LOCK_EINT_WIDTH               1  /* IM_SRC2_LOCK_EINT */
-#define WM8994_IM_SRC1_LOCK_EINT                0x0080  /* IM_SRC1_LOCK_EINT */
-#define WM8994_IM_SRC1_LOCK_EINT_MASK           0x0080  /* IM_SRC1_LOCK_EINT */
-#define WM8994_IM_SRC1_LOCK_EINT_SHIFT               7  /* IM_SRC1_LOCK_EINT */
-#define WM8994_IM_SRC1_LOCK_EINT_WIDTH               1  /* IM_SRC1_LOCK_EINT */
-#define WM8994_IM_FLL2_LOCK_EINT                0x0040  /* IM_FLL2_LOCK_EINT */
-#define WM8994_IM_FLL2_LOCK_EINT_MASK           0x0040  /* IM_FLL2_LOCK_EINT */
-#define WM8994_IM_FLL2_LOCK_EINT_SHIFT               6  /* IM_FLL2_LOCK_EINT */
-#define WM8994_IM_FLL2_LOCK_EINT_WIDTH               1  /* IM_FLL2_LOCK_EINT */
-#define WM8994_IM_FLL1_LOCK_EINT                0x0020  /* IM_FLL1_LOCK_EINT */
-#define WM8994_IM_FLL1_LOCK_EINT_MASK           0x0020  /* IM_FLL1_LOCK_EINT */
-#define WM8994_IM_FLL1_LOCK_EINT_SHIFT               5  /* IM_FLL1_LOCK_EINT */
-#define WM8994_IM_FLL1_LOCK_EINT_WIDTH               1  /* IM_FLL1_LOCK_EINT */
-#define WM8994_IM_MIC2_SHRT_EINT                0x0010  /* IM_MIC2_SHRT_EINT */
-#define WM8994_IM_MIC2_SHRT_EINT_MASK           0x0010  /* IM_MIC2_SHRT_EINT */
-#define WM8994_IM_MIC2_SHRT_EINT_SHIFT               4  /* IM_MIC2_SHRT_EINT */
-#define WM8994_IM_MIC2_SHRT_EINT_WIDTH               1  /* IM_MIC2_SHRT_EINT */
-#define WM8994_IM_MIC2_DET_EINT                 0x0008  /* IM_MIC2_DET_EINT */
-#define WM8994_IM_MIC2_DET_EINT_MASK            0x0008  /* IM_MIC2_DET_EINT */
-#define WM8994_IM_MIC2_DET_EINT_SHIFT                3  /* IM_MIC2_DET_EINT */
-#define WM8994_IM_MIC2_DET_EINT_WIDTH                1  /* IM_MIC2_DET_EINT */
-#define WM8994_IM_MIC1_SHRT_EINT                0x0004  /* IM_MIC1_SHRT_EINT */
-#define WM8994_IM_MIC1_SHRT_EINT_MASK           0x0004  /* IM_MIC1_SHRT_EINT */
-#define WM8994_IM_MIC1_SHRT_EINT_SHIFT               2  /* IM_MIC1_SHRT_EINT */
-#define WM8994_IM_MIC1_SHRT_EINT_WIDTH               1  /* IM_MIC1_SHRT_EINT */
-#define WM8994_IM_MIC1_DET_EINT                 0x0002  /* IM_MIC1_DET_EINT */
-#define WM8994_IM_MIC1_DET_EINT_MASK            0x0002  /* IM_MIC1_DET_EINT */
-#define WM8994_IM_MIC1_DET_EINT_SHIFT                1  /* IM_MIC1_DET_EINT */
-#define WM8994_IM_MIC1_DET_EINT_WIDTH                1  /* IM_MIC1_DET_EINT */
-#define WM8994_IM_TEMP_SHUT_EINT                0x0001  /* IM_TEMP_SHUT_EINT */
-#define WM8994_IM_TEMP_SHUT_EINT_MASK           0x0001  /* IM_TEMP_SHUT_EINT */
-#define WM8994_IM_TEMP_SHUT_EINT_SHIFT               0  /* IM_TEMP_SHUT_EINT */
-#define WM8994_IM_TEMP_SHUT_EINT_WIDTH               1  /* IM_TEMP_SHUT_EINT */
-
-/*
- * R1856 (0x740) - Interrupt Control
- */
-#define WM8994_IM_IRQ                           0x0001  /* IM_IRQ */
-#define WM8994_IM_IRQ_MASK                      0x0001  /* IM_IRQ */
-#define WM8994_IM_IRQ_SHIFT                          0  /* IM_IRQ */
-#define WM8994_IM_IRQ_WIDTH                          1  /* IM_IRQ */
-
-/*
- * R1864 (0x748) - IRQ Debounce
- */
-#define WM8994_TEMP_WARN_DB                     0x0020  /* TEMP_WARN_DB */
-#define WM8994_TEMP_WARN_DB_MASK                0x0020  /* TEMP_WARN_DB */
-#define WM8994_TEMP_WARN_DB_SHIFT                    5  /* TEMP_WARN_DB */
-#define WM8994_TEMP_WARN_DB_WIDTH                    1  /* TEMP_WARN_DB */
-#define WM8994_MIC2_SHRT_DB                     0x0010  /* MIC2_SHRT_DB */
-#define WM8994_MIC2_SHRT_DB_MASK                0x0010  /* MIC2_SHRT_DB */
-#define WM8994_MIC2_SHRT_DB_SHIFT                    4  /* MIC2_SHRT_DB */
-#define WM8994_MIC2_SHRT_DB_WIDTH                    1  /* MIC2_SHRT_DB */
-#define WM8994_MIC2_DET_DB                      0x0008  /* MIC2_DET_DB */
-#define WM8994_MIC2_DET_DB_MASK                 0x0008  /* MIC2_DET_DB */
-#define WM8994_MIC2_DET_DB_SHIFT                     3  /* MIC2_DET_DB */
-#define WM8994_MIC2_DET_DB_WIDTH                     1  /* MIC2_DET_DB */
-#define WM8994_MIC1_SHRT_DB                     0x0004  /* MIC1_SHRT_DB */
-#define WM8994_MIC1_SHRT_DB_MASK                0x0004  /* MIC1_SHRT_DB */
-#define WM8994_MIC1_SHRT_DB_SHIFT                    2  /* MIC1_SHRT_DB */
-#define WM8994_MIC1_SHRT_DB_WIDTH                    1  /* MIC1_SHRT_DB */
-#define WM8994_MIC1_DET_DB                      0x0002  /* MIC1_DET_DB */
-#define WM8994_MIC1_DET_DB_MASK                 0x0002  /* MIC1_DET_DB */
-#define WM8994_MIC1_DET_DB_SHIFT                     1  /* MIC1_DET_DB */
-#define WM8994_MIC1_DET_DB_WIDTH                     1  /* MIC1_DET_DB */
-#define WM8994_TEMP_SHUT_DB                     0x0001  /* TEMP_SHUT_DB */
-#define WM8994_TEMP_SHUT_DB_MASK                0x0001  /* TEMP_SHUT_DB */
-#define WM8994_TEMP_SHUT_DB_SHIFT                    0  /* TEMP_SHUT_DB */
-#define WM8994_TEMP_SHUT_DB_WIDTH                    1  /* TEMP_SHUT_DB */
-
-/*
- * R2304 (0x900) - DSP2_Program
- */
-#define WM8958_DSP2_ENA                         0x0001  /* DSP2_ENA */
-#define WM8958_DSP2_ENA_MASK                    0x0001  /* DSP2_ENA */
-#define WM8958_DSP2_ENA_SHIFT                        0  /* DSP2_ENA */
-#define WM8958_DSP2_ENA_WIDTH                        1  /* DSP2_ENA */
-
-/*
- * R2305 (0x901) - DSP2_Config
- */
-#define WM8958_MBC_SEL_MASK                     0x0030  /* MBC_SEL - [5:4] */
-#define WM8958_MBC_SEL_SHIFT                         4  /* MBC_SEL - [5:4] */
-#define WM8958_MBC_SEL_WIDTH                         2  /* MBC_SEL - [5:4] */
-#define WM8958_MBC_ENA                          0x0001  /* MBC_ENA */
-#define WM8958_MBC_ENA_MASK                     0x0001  /* MBC_ENA */
-#define WM8958_MBC_ENA_SHIFT                         0  /* MBC_ENA */
-#define WM8958_MBC_ENA_WIDTH                         1  /* MBC_ENA */
-
-/*
- * R2560 (0xA00) - DSP2_MagicNum
- */
-#define WM8958_DSP2_MAGIC_NUM_MASK              0xFFFF  /* DSP2_MAGIC_NUM - [15:0] */
-#define WM8958_DSP2_MAGIC_NUM_SHIFT                  0  /* DSP2_MAGIC_NUM - [15:0] */
-#define WM8958_DSP2_MAGIC_NUM_WIDTH                 16  /* DSP2_MAGIC_NUM - [15:0] */
-
-/*
- * R2561 (0xA01) - DSP2_ReleaseYear
- */
-#define WM8958_DSP2_RELEASE_YEAR_MASK           0xFFFF  /* DSP2_RELEASE_YEAR - [15:0] */
-#define WM8958_DSP2_RELEASE_YEAR_SHIFT               0  /* DSP2_RELEASE_YEAR - [15:0] */
-#define WM8958_DSP2_RELEASE_YEAR_WIDTH              16  /* DSP2_RELEASE_YEAR - [15:0] */
-
-/*
- * R2562 (0xA02) - DSP2_ReleaseMonthDay
- */
-#define WM8958_DSP2_RELEASE_MONTH_MASK          0xFF00  /* DSP2_RELEASE_MONTH - [15:8] */
-#define WM8958_DSP2_RELEASE_MONTH_SHIFT              8  /* DSP2_RELEASE_MONTH - [15:8] */
-#define WM8958_DSP2_RELEASE_MONTH_WIDTH              8  /* DSP2_RELEASE_MONTH - [15:8] */
-#define WM8958_DSP2_RELEASE_DAY_MASK            0x00FF  /* DSP2_RELEASE_DAY - [7:0] */
-#define WM8958_DSP2_RELEASE_DAY_SHIFT                0  /* DSP2_RELEASE_DAY - [7:0] */
-#define WM8958_DSP2_RELEASE_DAY_WIDTH                8  /* DSP2_RELEASE_DAY - [7:0] */
-
-/*
- * R2563 (0xA03) - DSP2_ReleaseTime
- */
-#define WM8958_DSP2_RELEASE_HOURS_MASK          0xFF00  /* DSP2_RELEASE_HOURS - [15:8] */
-#define WM8958_DSP2_RELEASE_HOURS_SHIFT              8  /* DSP2_RELEASE_HOURS - [15:8] */
-#define WM8958_DSP2_RELEASE_HOURS_WIDTH              8  /* DSP2_RELEASE_HOURS - [15:8] */
-#define WM8958_DSP2_RELEASE_MINS_MASK           0x00FF  /* DSP2_RELEASE_MINS - [7:0] */
-#define WM8958_DSP2_RELEASE_MINS_SHIFT               0  /* DSP2_RELEASE_MINS - [7:0] */
-#define WM8958_DSP2_RELEASE_MINS_WIDTH               8  /* DSP2_RELEASE_MINS - [7:0] */
-
-/*
- * R2564 (0xA04) - DSP2_VerMajMin
- */
-#define WM8958_DSP2_MAJOR_VER_MASK              0xFF00  /* DSP2_MAJOR_VER - [15:8] */
-#define WM8958_DSP2_MAJOR_VER_SHIFT                  8  /* DSP2_MAJOR_VER - [15:8] */
-#define WM8958_DSP2_MAJOR_VER_WIDTH                  8  /* DSP2_MAJOR_VER - [15:8] */
-#define WM8958_DSP2_MINOR_VER_MASK              0x00FF  /* DSP2_MINOR_VER - [7:0] */
-#define WM8958_DSP2_MINOR_VER_SHIFT                  0  /* DSP2_MINOR_VER - [7:0] */
-#define WM8958_DSP2_MINOR_VER_WIDTH                  8  /* DSP2_MINOR_VER - [7:0] */
-
-/*
- * R2565 (0xA05) - DSP2_VerBuild
- */
-#define WM8958_DSP2_BUILD_VER_MASK              0xFFFF  /* DSP2_BUILD_VER - [15:0] */
-#define WM8958_DSP2_BUILD_VER_SHIFT                  0  /* DSP2_BUILD_VER - [15:0] */
-#define WM8958_DSP2_BUILD_VER_WIDTH                 16  /* DSP2_BUILD_VER - [15:0] */
-
-/*
- * R2573 (0xA0D) - DSP2_ExecControl
- */
-#define WM8958_DSP2_STOPC                       0x0020  /* DSP2_STOPC */
-#define WM8958_DSP2_STOPC_MASK                  0x0020  /* DSP2_STOPC */
-#define WM8958_DSP2_STOPC_SHIFT                      5  /* DSP2_STOPC */
-#define WM8958_DSP2_STOPC_WIDTH                      1  /* DSP2_STOPC */
-#define WM8958_DSP2_STOPS                       0x0010  /* DSP2_STOPS */
-#define WM8958_DSP2_STOPS_MASK                  0x0010  /* DSP2_STOPS */
-#define WM8958_DSP2_STOPS_SHIFT                      4  /* DSP2_STOPS */
-#define WM8958_DSP2_STOPS_WIDTH                      1  /* DSP2_STOPS */
-#define WM8958_DSP2_STOPI                       0x0008  /* DSP2_STOPI */
-#define WM8958_DSP2_STOPI_MASK                  0x0008  /* DSP2_STOPI */
-#define WM8958_DSP2_STOPI_SHIFT                      3  /* DSP2_STOPI */
-#define WM8958_DSP2_STOPI_WIDTH                      1  /* DSP2_STOPI */
-#define WM8958_DSP2_STOP                        0x0004  /* DSP2_STOP */
-#define WM8958_DSP2_STOP_MASK                   0x0004  /* DSP2_STOP */
-#define WM8958_DSP2_STOP_SHIFT                       2  /* DSP2_STOP */
-#define WM8958_DSP2_STOP_WIDTH                       1  /* DSP2_STOP */
-#define WM8958_DSP2_RUNR                        0x0002  /* DSP2_RUNR */
-#define WM8958_DSP2_RUNR_MASK                   0x0002  /* DSP2_RUNR */
-#define WM8958_DSP2_RUNR_SHIFT                       1  /* DSP2_RUNR */
-#define WM8958_DSP2_RUNR_WIDTH                       1  /* DSP2_RUNR */
-#define WM8958_DSP2_RUN                         0x0001  /* DSP2_RUN */
-#define WM8958_DSP2_RUN_MASK                    0x0001  /* DSP2_RUN */
-#define WM8958_DSP2_RUN_SHIFT                        0  /* DSP2_RUN */
-#define WM8958_DSP2_RUN_WIDTH                        1  /* DSP2_RUN */
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/mg_disk.h b/ANDROID_3.4.5/include/linux/mg_disk.h
deleted file mode 100644
index e11f4d9f..00000000
--- a/ANDROID_3.4.5/include/linux/mg_disk.h
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- *  include/linux/mg_disk.c
- *
- *  Private data for mflash platform driver
- *
- * (c) 2008 mGine Co.,LTD
- * (c) 2008 unsik Kim <donari75@gmail.com>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-
-#ifndef __MG_DISK_H__
-#define __MG_DISK_H__
-
-/* name for platform device */
-#define MG_DEV_NAME "mg_disk"
-
-/* names of GPIO resource */
-#define MG_RST_PIN	"mg_rst"
-/* except MG_BOOT_DEV, reset-out pin should be assigned */
-#define MG_RSTOUT_PIN	"mg_rstout"
-
-/* device attribution */
-/* use mflash as boot device */
-#define MG_BOOT_DEV		(1 << 0)
-/* use mflash as storage device */
-#define MG_STORAGE_DEV		(1 << 1)
-/* same as MG_STORAGE_DEV, but bootloader already done reset sequence */
-#define MG_STORAGE_DEV_SKIP_RST	(1 << 2)
-
-/* private driver data */
-struct mg_drv_data {
-	/* disk resource */
-	u32 use_polling;
-
-	/* device attribution */
-	u32 dev_attr;
-
-	/* internally used */
-	void *host;
-};
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/micrel_phy.h b/ANDROID_3.4.5/include/linux/micrel_phy.h
deleted file mode 100644
index dd8da342..00000000
--- a/ANDROID_3.4.5/include/linux/micrel_phy.h
+++ /dev/null
@@ -1,16 +0,0 @@
-#ifndef _MICREL_PHY_H
-#define _MICREL_PHY_H
-
-#define MICREL_PHY_ID_MASK	0x00fffff0
-
-#define PHY_ID_KSZ9021		0x00221611
-#define PHY_ID_KS8737		0x00221720
-#define PHY_ID_KS8041		0x00221510
-#define PHY_ID_KS8051		0x00221550
-/* both for ks8001 Rev. A/B, and for ks8721 Rev 3. */
-#define PHY_ID_KS8001		0x0022161A
-
-/* struct phy_device dev_flags definitions */
-#define MICREL_PHY_50MHZ_CLK	0x00000001
-
-#endif /* _MICREL_PHY_H */
diff --git a/ANDROID_3.4.5/include/linux/migrate.h b/ANDROID_3.4.5/include/linux/migrate.h
deleted file mode 100644
index 855c337b..00000000
--- a/ANDROID_3.4.5/include/linux/migrate.h
+++ /dev/null
@@ -1,67 +0,0 @@
-#ifndef _LINUX_MIGRATE_H
-#define _LINUX_MIGRATE_H
-
-#include <linux/mm.h>
-#include <linux/mempolicy.h>
-#include <linux/migrate_mode.h>
-
-typedef struct page *new_page_t(struct page *, unsigned long private, int **);
-
-#ifdef CONFIG_MIGRATION
-
-extern void putback_lru_pages(struct list_head *l);
-extern int migrate_page(struct address_space *,
-			struct page *, struct page *, enum migrate_mode);
-extern int migrate_pages(struct list_head *l, new_page_t x,
-			unsigned long private, bool offlining,
-			enum migrate_mode mode);
-extern int migrate_huge_pages(struct list_head *l, new_page_t x,
-			unsigned long private, bool offlining,
-			enum migrate_mode mode);
-
-extern int fail_migrate_page(struct address_space *,
-			struct page *, struct page *);
-
-extern int migrate_prep(void);
-extern int migrate_prep_local(void);
-extern int migrate_vmas(struct mm_struct *mm,
-		const nodemask_t *from, const nodemask_t *to,
-		unsigned long flags);
-extern void migrate_page_copy(struct page *newpage, struct page *page);
-extern int migrate_huge_page_move_mapping(struct address_space *mapping,
-				  struct page *newpage, struct page *page);
-#else
-
-static inline void putback_lru_pages(struct list_head *l) {}
-static inline int migrate_pages(struct list_head *l, new_page_t x,
-		unsigned long private, bool offlining,
-		enum migrate_mode mode) { return -ENOSYS; }
-static inline int migrate_huge_pages(struct list_head *l, new_page_t x,
-		unsigned long private, bool offlining,
-		enum migrate_mode mode) { return -ENOSYS; }
-
-static inline int migrate_prep(void) { return -ENOSYS; }
-static inline int migrate_prep_local(void) { return -ENOSYS; }
-
-static inline int migrate_vmas(struct mm_struct *mm,
-		const nodemask_t *from, const nodemask_t *to,
-		unsigned long flags)
-{
-	return -ENOSYS;
-}
-
-static inline void migrate_page_copy(struct page *newpage,
-				     struct page *page) {}
-
-static inline int migrate_huge_page_move_mapping(struct address_space *mapping,
-				  struct page *newpage, struct page *page)
-{
-	return -ENOSYS;
-}
-
-/* Possible settings for the migrate_page() method in address_operations */
-#define migrate_page NULL
-#define fail_migrate_page NULL
-
-#endif /* CONFIG_MIGRATION */
-#endif /* _LINUX_MIGRATE_H */
diff --git a/ANDROID_3.4.5/include/linux/migrate_mode.h b/ANDROID_3.4.5/include/linux/migrate_mode.h
deleted file mode 100644
index ebf3d89a..00000000
--- a/ANDROID_3.4.5/include/linux/migrate_mode.h
+++ /dev/null
@@ -1,16 +0,0 @@
-#ifndef MIGRATE_MODE_H_INCLUDED
-#define MIGRATE_MODE_H_INCLUDED
-/*
- * MIGRATE_ASYNC means never block
- * MIGRATE_SYNC_LIGHT in the current implementation means to allow blocking
- *	on most operations but not ->writepage as the potential stall time
- *	is too significant
- * MIGRATE_SYNC will block when migrating pages
- */
-enum migrate_mode {
-	MIGRATE_ASYNC,
-	MIGRATE_SYNC_LIGHT,
-	MIGRATE_SYNC,
-};
-
-#endif		/* MIGRATE_MODE_H_INCLUDED */
diff --git a/ANDROID_3.4.5/include/linux/mii.h b/ANDROID_3.4.5/include/linux/mii.h
deleted file mode 100644
index 2783eca6..00000000
--- a/ANDROID_3.4.5/include/linux/mii.h
+++ /dev/null
@@ -1,482 +0,0 @@
-/*
- * linux/mii.h: definitions for MII-compatible transceivers
- * Originally drivers/net/sunhme.h.
- *
- * Copyright (C) 1996, 1999, 2001 David S. Miller (davem@redhat.com)
- */
-
-#ifndef __LINUX_MII_H__
-#define __LINUX_MII_H__
-
-#include <linux/types.h>
-#include <linux/ethtool.h>
-
-/* Generic MII registers. */
-#define MII_BMCR		0x00	/* Basic mode control register */
-#define MII_BMSR		0x01	/* Basic mode status register  */
-#define MII_PHYSID1		0x02	/* PHYS ID 1                   */
-#define MII_PHYSID2		0x03	/* PHYS ID 2                   */
-#define MII_ADVERTISE		0x04	/* Advertisement control reg   */
-#define MII_LPA			0x05	/* Link partner ability reg    */
-#define MII_EXPANSION		0x06	/* Expansion register          */
-#define MII_CTRL1000		0x09	/* 1000BASE-T control          */
-#define MII_STAT1000		0x0a	/* 1000BASE-T status           */
-#define MII_ESTATUS		0x0f	/* Extended Status             */
-#define MII_DCOUNTER		0x12	/* Disconnect counter          */
-#define MII_FCSCOUNTER		0x13	/* False carrier counter       */
-#define MII_NWAYTEST		0x14	/* N-way auto-neg test reg     */
-#define MII_RERRCOUNTER		0x15	/* Receive error counter       */
-#define MII_SREVISION		0x16	/* Silicon revision            */
-#define MII_RESV1		0x17	/* Reserved...                 */
-#define MII_LBRERROR		0x18	/* Lpback, rx, bypass error    */
-#define MII_PHYADDR		0x19	/* PHY address                 */
-#define MII_RESV2		0x1a	/* Reserved...                 */
-#define MII_TPISTATUS		0x1b	/* TPI status for 10mbps       */
-#define MII_NCONFIG		0x1c	/* Network interface config    */
-
-/* Basic mode control register. */
-#define BMCR_RESV		0x003f	/* Unused...                   */
-#define BMCR_SPEED1000		0x0040	/* MSB of Speed (1000)         */
-#define BMCR_CTST		0x0080	/* Collision test              */
-#define BMCR_FULLDPLX		0x0100	/* Full duplex                 */
-#define BMCR_ANRESTART		0x0200	/* Auto negotiation restart    */
-#define BMCR_ISOLATE		0x0400	/* Isolate data paths from MII */
-#define BMCR_PDOWN		0x0800	/* Enable low power state      */
-#define BMCR_ANENABLE		0x1000	/* Enable auto negotiation     */
-#define BMCR_SPEED100		0x2000	/* Select 100Mbps              */
-#define BMCR_LOOPBACK		0x4000	/* TXD loopback bits           */
-#define BMCR_RESET		0x8000	/* Reset to default state      */
-
-/* Basic mode status register. */
-#define BMSR_ERCAP		0x0001	/* Ext-reg capability          */
-#define BMSR_JCD		0x0002	/* Jabber detected             */
-#define BMSR_LSTATUS		0x0004	/* Link status                 */
-#define BMSR_ANEGCAPABLE	0x0008	/* Able to do auto-negotiation */
-#define BMSR_RFAULT		0x0010	/* Remote fault detected       */
-#define BMSR_ANEGCOMPLETE	0x0020	/* Auto-negotiation complete   */
-#define BMSR_RESV		0x00c0	/* Unused...                   */
-#define BMSR_ESTATEN		0x0100	/* Extended Status in R15      */
-#define BMSR_100HALF2		0x0200	/* Can do 100BASE-T2 HDX       */
-#define BMSR_100FULL2		0x0400	/* Can do 100BASE-T2 FDX       */
-#define BMSR_10HALF		0x0800	/* Can do 10mbps, half-duplex  */
-#define BMSR_10FULL		0x1000	/* Can do 10mbps, full-duplex  */
-#define BMSR_100HALF		0x2000	/* Can do 100mbps, half-duplex */
-#define BMSR_100FULL		0x4000	/* Can do 100mbps, full-duplex */
-#define BMSR_100BASE4		0x8000	/* Can do 100mbps, 4k packets  */
-
-/* Advertisement control register. */
-#define ADVERTISE_SLCT		0x001f	/* Selector bits               */
-#define ADVERTISE_CSMA		0x0001	/* Only selector supported     */
-#define ADVERTISE_10HALF	0x0020	/* Try for 10mbps half-duplex  */
-#define ADVERTISE_1000XFULL	0x0020	/* Try for 1000BASE-X full-duplex */
-#define ADVERTISE_10FULL	0x0040	/* Try for 10mbps full-duplex  */
-#define ADVERTISE_1000XHALF	0x0040	/* Try for 1000BASE-X half-duplex */
-#define ADVERTISE_100HALF	0x0080	/* Try for 100mbps half-duplex */
-#define ADVERTISE_1000XPAUSE	0x0080	/* Try for 1000BASE-X pause    */
-#define ADVERTISE_100FULL	0x0100	/* Try for 100mbps full-duplex */
-#define ADVERTISE_1000XPSE_ASYM	0x0100	/* Try for 1000BASE-X asym pause */
-#define ADVERTISE_100BASE4	0x0200	/* Try for 100mbps 4k packets  */
-#define ADVERTISE_PAUSE_CAP	0x0400	/* Try for pause               */
-#define ADVERTISE_PAUSE_ASYM	0x0800	/* Try for asymetric pause     */
-#define ADVERTISE_RESV		0x1000	/* Unused...                   */
-#define ADVERTISE_RFAULT	0x2000	/* Say we can detect faults    */
-#define ADVERTISE_LPACK		0x4000	/* Ack link partners response  */
-#define ADVERTISE_NPAGE		0x8000	/* Next page bit               */
-
-#define ADVERTISE_FULL		(ADVERTISE_100FULL | ADVERTISE_10FULL | \
-				  ADVERTISE_CSMA)
-#define ADVERTISE_ALL		(ADVERTISE_10HALF | ADVERTISE_10FULL | \
-				  ADVERTISE_100HALF | ADVERTISE_100FULL)
-
-/* Link partner ability register. */
-#define LPA_SLCT		0x001f	/* Same as advertise selector  */
-#define LPA_10HALF		0x0020	/* Can do 10mbps half-duplex   */
-#define LPA_1000XFULL		0x0020	/* Can do 1000BASE-X full-duplex */
-#define LPA_10FULL		0x0040	/* Can do 10mbps full-duplex   */
-#define LPA_1000XHALF		0x0040	/* Can do 1000BASE-X half-duplex */
-#define LPA_100HALF		0x0080	/* Can do 100mbps half-duplex  */
-#define LPA_1000XPAUSE		0x0080	/* Can do 1000BASE-X pause     */
-#define LPA_100FULL		0x0100	/* Can do 100mbps full-duplex  */
-#define LPA_1000XPAUSE_ASYM	0x0100	/* Can do 1000BASE-X pause asym*/
-#define LPA_100BASE4		0x0200	/* Can do 100mbps 4k packets   */
-#define LPA_PAUSE_CAP		0x0400	/* Can pause                   */
-#define LPA_PAUSE_ASYM		0x0800	/* Can pause asymetrically     */
-#define LPA_RESV		0x1000	/* Unused...                   */
-#define LPA_RFAULT		0x2000	/* Link partner faulted        */
-#define LPA_LPACK		0x4000	/* Link partner acked us       */
-#define LPA_NPAGE		0x8000	/* Next page bit               */
-
-#define LPA_DUPLEX		(LPA_10FULL | LPA_100FULL)
-#define LPA_100			(LPA_100FULL | LPA_100HALF | LPA_100BASE4)
-
-/* Expansion register for auto-negotiation. */
-#define EXPANSION_NWAY		0x0001	/* Can do N-way auto-nego      */
-#define EXPANSION_LCWP		0x0002	/* Got new RX page code word   */
-#define EXPANSION_ENABLENPAGE	0x0004	/* This enables npage words    */
-#define EXPANSION_NPCAPABLE	0x0008	/* Link partner supports npage */
-#define EXPANSION_MFAULTS	0x0010	/* Multiple faults detected    */
-#define EXPANSION_RESV		0xffe0	/* Unused...                   */
-
-#define ESTATUS_1000_TFULL	0x2000	/* Can do 1000BT Full          */
-#define ESTATUS_1000_THALF	0x1000	/* Can do 1000BT Half          */
-
-/* N-way test register. */
-#define NWAYTEST_RESV1		0x00ff	/* Unused...                   */
-#define NWAYTEST_LOOPBACK	0x0100	/* Enable loopback for N-way   */
-#define NWAYTEST_RESV2		0xfe00	/* Unused...                   */
-
-/* 1000BASE-T Control register */
-#define ADVERTISE_1000FULL	0x0200  /* Advertise 1000BASE-T full duplex */
-#define ADVERTISE_1000HALF	0x0100  /* Advertise 1000BASE-T half duplex */
-#define CTL1000_AS_MASTER	0x0800
-#define CTL1000_ENABLE_MASTER	0x1000
-
-/* 1000BASE-T Status register */
-#define LPA_1000LOCALRXOK	0x2000	/* Link partner local receiver status */
-#define LPA_1000REMRXOK		0x1000	/* Link partner remote receiver status */
-#define LPA_1000FULL		0x0800	/* Link partner 1000BASE-T full duplex */
-#define LPA_1000HALF		0x0400	/* Link partner 1000BASE-T half duplex */
-
-/* Flow control flags */
-#define FLOW_CTRL_TX		0x01
-#define FLOW_CTRL_RX		0x02
-
-/* This structure is used in all SIOCxMIIxxx ioctl calls */
-struct mii_ioctl_data {
-	__u16		phy_id;
-	__u16		reg_num;
-	__u16		val_in;
-	__u16		val_out;
-};
-
-#ifdef __KERNEL__
-
-#include <linux/if.h>
-
-struct ethtool_cmd;
-
-struct mii_if_info {
-	int phy_id;
-	int advertising;
-	int phy_id_mask;
-	int reg_num_mask;
-
-	unsigned int full_duplex : 1;	/* is full duplex? */
-	unsigned int force_media : 1;	/* is autoneg. disabled? */
-	unsigned int supports_gmii : 1; /* are GMII registers supported? */
-
-	struct net_device *dev;
-	int (*mdio_read) (struct net_device *dev, int phy_id, int location);
-	void (*mdio_write) (struct net_device *dev, int phy_id, int location, int val);
-};
-
-extern int mii_link_ok (struct mii_if_info *mii);
-extern int mii_nway_restart (struct mii_if_info *mii);
-extern int mii_ethtool_gset(struct mii_if_info *mii, struct ethtool_cmd *ecmd);
-extern int mii_ethtool_sset(struct mii_if_info *mii, struct ethtool_cmd *ecmd);
-extern int mii_check_gmii_support(struct mii_if_info *mii);
-extern void mii_check_link (struct mii_if_info *mii);
-extern unsigned int mii_check_media (struct mii_if_info *mii,
-				     unsigned int ok_to_print,
-				     unsigned int init_media);
-extern int generic_mii_ioctl(struct mii_if_info *mii_if,
-			     struct mii_ioctl_data *mii_data, int cmd,
-			     unsigned int *duplex_changed);
-
-
-static inline struct mii_ioctl_data *if_mii(struct ifreq *rq)
-{
-	return (struct mii_ioctl_data *) &rq->ifr_ifru;
-}
-
-/**
- * mii_nway_result
- * @negotiated: value of MII ANAR and'd with ANLPAR
- *
- * Given a set of MII abilities, check each bit and returns the
- * currently supported media, in the priority order defined by
- * IEEE 802.3u.  We use LPA_xxx constants but note this is not the
- * value of LPA solely, as described above.
- *
- * The one exception to IEEE 802.3u is that 100baseT4 is placed
- * between 100T-full and 100T-half.  If your phy does not support
- * 100T4 this is fine.  If your phy places 100T4 elsewhere in the
- * priority order, you will need to roll your own function.
- */
-static inline unsigned int mii_nway_result (unsigned int negotiated)
-{
-	unsigned int ret;
-
-	if (negotiated & LPA_100FULL)
-		ret = LPA_100FULL;
-	else if (negotiated & LPA_100BASE4)
-		ret = LPA_100BASE4;
-	else if (negotiated & LPA_100HALF)
-		ret = LPA_100HALF;
-	else if (negotiated & LPA_10FULL)
-		ret = LPA_10FULL;
-	else
-		ret = LPA_10HALF;
-
-	return ret;
-}
-
-/**
- * mii_duplex
- * @duplex_lock: Non-zero if duplex is locked at full
- * @negotiated: value of MII ANAR and'd with ANLPAR
- *
- * A small helper function for a common case.  Returns one
- * if the media is operating or locked at full duplex, and
- * returns zero otherwise.
- */
-static inline unsigned int mii_duplex (unsigned int duplex_lock,
-				       unsigned int negotiated)
-{
-	if (duplex_lock)
-		return 1;
-	if (mii_nway_result(negotiated) & LPA_DUPLEX)
-		return 1;
-	return 0;
-}
-
-/**
- * ethtool_adv_to_mii_adv_t
- * @ethadv: the ethtool advertisement settings
- *
- * A small helper function that translates ethtool advertisement
- * settings to phy autonegotiation advertisements for the
- * MII_ADVERTISE register.
- */
-static inline u32 ethtool_adv_to_mii_adv_t(u32 ethadv)
-{
-	u32 result = 0;
-
-	if (ethadv & ADVERTISED_10baseT_Half)
-		result |= ADVERTISE_10HALF;
-	if (ethadv & ADVERTISED_10baseT_Full)
-		result |= ADVERTISE_10FULL;
-	if (ethadv & ADVERTISED_100baseT_Half)
-		result |= ADVERTISE_100HALF;
-	if (ethadv & ADVERTISED_100baseT_Full)
-		result |= ADVERTISE_100FULL;
-	if (ethadv & ADVERTISED_Pause)
-		result |= ADVERTISE_PAUSE_CAP;
-	if (ethadv & ADVERTISED_Asym_Pause)
-		result |= ADVERTISE_PAUSE_ASYM;
-
-	return result;
-}
-
-/**
- * mii_adv_to_ethtool_adv_t
- * @adv: value of the MII_ADVERTISE register
- *
- * A small helper function that translates MII_ADVERTISE bits
- * to ethtool advertisement settings.
- */
-static inline u32 mii_adv_to_ethtool_adv_t(u32 adv)
-{
-	u32 result = 0;
-
-	if (adv & ADVERTISE_10HALF)
-		result |= ADVERTISED_10baseT_Half;
-	if (adv & ADVERTISE_10FULL)
-		result |= ADVERTISED_10baseT_Full;
-	if (adv & ADVERTISE_100HALF)
-		result |= ADVERTISED_100baseT_Half;
-	if (adv & ADVERTISE_100FULL)
-		result |= ADVERTISED_100baseT_Full;
-	if (adv & ADVERTISE_PAUSE_CAP)
-		result |= ADVERTISED_Pause;
-	if (adv & ADVERTISE_PAUSE_ASYM)
-		result |= ADVERTISED_Asym_Pause;
-
-	return result;
-}
-
-/**
- * ethtool_adv_to_mii_ctrl1000_t
- * @ethadv: the ethtool advertisement settings
- *
- * A small helper function that translates ethtool advertisement
- * settings to phy autonegotiation advertisements for the
- * MII_CTRL1000 register when in 1000T mode.
- */
-static inline u32 ethtool_adv_to_mii_ctrl1000_t(u32 ethadv)
-{
-	u32 result = 0;
-
-	if (ethadv & ADVERTISED_1000baseT_Half)
-		result |= ADVERTISE_1000HALF;
-	if (ethadv & ADVERTISED_1000baseT_Full)
-		result |= ADVERTISE_1000FULL;
-
-	return result;
-}
-
-/**
- * mii_ctrl1000_to_ethtool_adv_t
- * @adv: value of the MII_CTRL1000 register
- *
- * A small helper function that translates MII_CTRL1000
- * bits, when in 1000Base-T mode, to ethtool
- * advertisement settings.
- */
-static inline u32 mii_ctrl1000_to_ethtool_adv_t(u32 adv)
-{
-	u32 result = 0;
-
-	if (adv & ADVERTISE_1000HALF)
-		result |= ADVERTISED_1000baseT_Half;
-	if (adv & ADVERTISE_1000FULL)
-		result |= ADVERTISED_1000baseT_Full;
-
-	return result;
-}
-
-/**
- * mii_lpa_to_ethtool_lpa_t
- * @adv: value of the MII_LPA register
- *
- * A small helper function that translates MII_LPA
- * bits, when in 1000Base-T mode, to ethtool
- * LP advertisement settings.
- */
-static inline u32 mii_lpa_to_ethtool_lpa_t(u32 lpa)
-{
-	u32 result = 0;
-
-	if (lpa & LPA_LPACK)
-		result |= ADVERTISED_Autoneg;
-
-	return result | mii_adv_to_ethtool_adv_t(lpa);
-}
-
-/**
- * mii_stat1000_to_ethtool_lpa_t
- * @adv: value of the MII_STAT1000 register
- *
- * A small helper function that translates MII_STAT1000
- * bits, when in 1000Base-T mode, to ethtool
- * advertisement settings.
- */
-static inline u32 mii_stat1000_to_ethtool_lpa_t(u32 lpa)
-{
-	u32 result = 0;
-
-	if (lpa & LPA_1000HALF)
-		result |= ADVERTISED_1000baseT_Half;
-	if (lpa & LPA_1000FULL)
-		result |= ADVERTISED_1000baseT_Full;
-
-	return result;
-}
-
-/**
- * ethtool_adv_to_mii_adv_x
- * @ethadv: the ethtool advertisement settings
- *
- * A small helper function that translates ethtool advertisement
- * settings to phy autonegotiation advertisements for the
- * MII_CTRL1000 register when in 1000Base-X mode.
- */
-static inline u32 ethtool_adv_to_mii_adv_x(u32 ethadv)
-{
-	u32 result = 0;
-
-	if (ethadv & ADVERTISED_1000baseT_Half)
-		result |= ADVERTISE_1000XHALF;
-	if (ethadv & ADVERTISED_1000baseT_Full)
-		result |= ADVERTISE_1000XFULL;
-	if (ethadv & ADVERTISED_Pause)
-		result |= ADVERTISE_1000XPAUSE;
-	if (ethadv & ADVERTISED_Asym_Pause)
-		result |= ADVERTISE_1000XPSE_ASYM;
-
-	return result;
-}
-
-/**
- * mii_adv_to_ethtool_adv_x
- * @adv: value of the MII_CTRL1000 register
- *
- * A small helper function that translates MII_CTRL1000
- * bits, when in 1000Base-X mode, to ethtool
- * advertisement settings.
- */
-static inline u32 mii_adv_to_ethtool_adv_x(u32 adv)
-{
-	u32 result = 0;
-
-	if (adv & ADVERTISE_1000XHALF)
-		result |= ADVERTISED_1000baseT_Half;
-	if (adv & ADVERTISE_1000XFULL)
-		result |= ADVERTISED_1000baseT_Full;
-	if (adv & ADVERTISE_1000XPAUSE)
-		result |= ADVERTISED_Pause;
-	if (adv & ADVERTISE_1000XPSE_ASYM)
-		result |= ADVERTISED_Asym_Pause;
-
-	return result;
-}
-
-/**
- * mii_lpa_to_ethtool_lpa_x
- * @adv: value of the MII_LPA register
- *
- * A small helper function that translates MII_LPA
- * bits, when in 1000Base-X mode, to ethtool
- * LP advertisement settings.
- */
-static inline u32 mii_lpa_to_ethtool_lpa_x(u32 lpa)
-{
-	u32 result = 0;
-
-	if (lpa & LPA_LPACK)
-		result |= ADVERTISED_Autoneg;
-
-	return result | mii_adv_to_ethtool_adv_x(lpa);
-}
-
-/**
- * mii_advertise_flowctrl - get flow control advertisement flags
- * @cap: Flow control capabilities (FLOW_CTRL_RX, FLOW_CTRL_TX or both)
- */
-static inline u16 mii_advertise_flowctrl(int cap)
-{
-	u16 adv = 0;
-
-	if (cap & FLOW_CTRL_RX)
-		adv = ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM;
-	if (cap & FLOW_CTRL_TX)
-		adv ^= ADVERTISE_PAUSE_ASYM;
-
-	return adv;
-}
-
-/**
- * mii_resolve_flowctrl_fdx
- * @lcladv: value of MII ADVERTISE register
- * @rmtadv: value of MII LPA register
- *
- * Resolve full duplex flow control as per IEEE 802.3-2005 table 28B-3
- */
-static inline u8 mii_resolve_flowctrl_fdx(u16 lcladv, u16 rmtadv)
-{
-	u8 cap = 0;
-
-	if (lcladv & rmtadv & ADVERTISE_PAUSE_CAP) {
-		cap = FLOW_CTRL_TX | FLOW_CTRL_RX;
-	} else if (lcladv & rmtadv & ADVERTISE_PAUSE_ASYM) {
-		if (lcladv & ADVERTISE_PAUSE_CAP)
-			cap = FLOW_CTRL_RX;
-		else if (rmtadv & ADVERTISE_PAUSE_CAP)
-			cap = FLOW_CTRL_TX;
-	}
-
-	return cap;
-}
-
-#endif /* __KERNEL__ */
-#endif /* __LINUX_MII_H__ */
diff --git a/ANDROID_3.4.5/include/linux/minix_fs.h b/ANDROID_3.4.5/include/linux/minix_fs.h
deleted file mode 100644
index 13fe09e0..00000000
--- a/ANDROID_3.4.5/include/linux/minix_fs.h
+++ /dev/null
@@ -1,106 +0,0 @@
-#ifndef _LINUX_MINIX_FS_H
-#define _LINUX_MINIX_FS_H
-
-#include <linux/types.h>
-#include <linux/magic.h>
-
-/*
- * The minix filesystem constants/structures
- */
-
-/*
- * Thanks to Kees J Bot for sending me the definitions of the new
- * minix filesystem (aka V2) with bigger inodes and 32-bit block
- * pointers.
- */
-
-#define MINIX_ROOT_INO 1
-
-/* Not the same as the bogus LINK_MAX in <linux/limits.h>. Oh well. */
-#define MINIX_LINK_MAX	250
-#define MINIX2_LINK_MAX	65530
-
-#define MINIX_I_MAP_SLOTS	8
-#define MINIX_Z_MAP_SLOTS	64
-#define MINIX_VALID_FS		0x0001		/* Clean fs. */
-#define MINIX_ERROR_FS		0x0002		/* fs has errors. */
-
-#define MINIX_INODES_PER_BLOCK ((BLOCK_SIZE)/(sizeof (struct minix_inode)))
-
-/*
- * This is the original minix inode layout on disk.
- * Note the 8-bit gid and atime and ctime.
- */
-struct minix_inode {
-	__u16 i_mode;
-	__u16 i_uid;
-	__u32 i_size;
-	__u32 i_time;
-	__u8  i_gid;
-	__u8  i_nlinks;
-	__u16 i_zone[9];
-};
-
-/*
- * The new minix inode has all the time entries, as well as
- * long block numbers and a third indirect block (7+1+1+1
- * instead of 7+1+1). Also, some previously 8-bit values are
- * now 16-bit. The inode is now 64 bytes instead of 32.
- */
-struct minix2_inode {
-	__u16 i_mode;
-	__u16 i_nlinks;
-	__u16 i_uid;
-	__u16 i_gid;
-	__u32 i_size;
-	__u32 i_atime;
-	__u32 i_mtime;
-	__u32 i_ctime;
-	__u32 i_zone[10];
-};
-
-/*
- * minix super-block data on disk
- */
-struct minix_super_block {
-	__u16 s_ninodes;
-	__u16 s_nzones;
-	__u16 s_imap_blocks;
-	__u16 s_zmap_blocks;
-	__u16 s_firstdatazone;
-	__u16 s_log_zone_size;
-	__u32 s_max_size;
-	__u16 s_magic;
-	__u16 s_state;
-	__u32 s_zones;
-};
-
-/*
- * V3 minix super-block data on disk
- */
-struct minix3_super_block {
-	__u32 s_ninodes;
-	__u16 s_pad0;
-	__u16 s_imap_blocks;
-	__u16 s_zmap_blocks;
-	__u16 s_firstdatazone;
-	__u16 s_log_zone_size;
-	__u16 s_pad1;
-	__u32 s_max_size;
-	__u32 s_zones;
-	__u16 s_magic;
-	__u16 s_pad2;
-	__u16 s_blocksize;
-	__u8  s_disk_version;
-};
-
-struct minix_dir_entry {
-	__u16 inode;
-	char name[0];
-};
-
-struct minix3_dir_entry {
-	__u32 inode;
-	char name[0];
-};
-#endif
diff --git a/ANDROID_3.4.5/include/linux/miscdevice.h b/ANDROID_3.4.5/include/linux/miscdevice.h
deleted file mode 100644
index 0549d211..00000000
--- a/ANDROID_3.4.5/include/linux/miscdevice.h
+++ /dev/null
@@ -1,67 +0,0 @@
-#ifndef _LINUX_MISCDEVICE_H
-#define _LINUX_MISCDEVICE_H
-#include <linux/major.h>
-#include <linux/list.h>
-#include <linux/types.h>
-
-/*
- *	These allocations are managed by device@lanana.org. If you use an
- *	entry that is not in assigned your entry may well be moved and
- *	reassigned, or set dynamic if a fixed value is not justified.
- */
-
-#define PSMOUSE_MINOR		1
-#define MS_BUSMOUSE_MINOR	2
-#define ATIXL_BUSMOUSE_MINOR	3
-/*#define AMIGAMOUSE_MINOR	4	FIXME OBSOLETE */
-#define ATARIMOUSE_MINOR	5
-#define SUN_MOUSE_MINOR		6
-#define APOLLO_MOUSE_MINOR	7
-#define PC110PAD_MINOR		9
-/*#define ADB_MOUSE_MINOR	10	FIXME OBSOLETE */
-#define WATCHDOG_MINOR		130	/* Watchdog timer     */
-#define TEMP_MINOR		131	/* Temperature Sensor */
-#define RTC_MINOR		135
-#define EFI_RTC_MINOR		136	/* EFI Time services */
-#define SUN_OPENPROM_MINOR	139
-#define DMAPI_MINOR		140	/* DMAPI */
-#define NVRAM_MINOR		144
-#define SGI_MMTIMER		153
-#define STORE_QUEUE_MINOR	155
-#define I2O_MINOR		166
-#define MICROCODE_MINOR		184
-#define TUN_MINOR		200
-#define MWAVE_MINOR		219	/* ACP/Mwave Modem */
-#define MPT_MINOR		220
-#define MPT2SAS_MINOR		221
-#define UINPUT_MINOR		223
-#define HPET_MINOR		228
-#define FUSE_MINOR		229
-#define KVM_MINOR		232
-#define BTRFS_MINOR		234
-#define AUTOFS_MINOR		235
-#define MAPPER_CTRL_MINOR	236
-#define LOOP_CTRL_MINOR		237
-#define VHOST_NET_MINOR		238
-#define MISC_DYNAMIC_MINOR	255
-
-struct device;
-
-struct miscdevice  {
-	int minor;
-	const char *name;
-	const struct file_operations *fops;
-	struct list_head list;
-	struct device *parent;
-	struct device *this_device;
-	const char *nodename;
-	umode_t mode;
-};
-
-extern int misc_register(struct miscdevice * misc);
-extern int misc_deregister(struct miscdevice *misc);
-
-#define MODULE_ALIAS_MISCDEV(minor)				\
-	MODULE_ALIAS("char-major-" __stringify(MISC_MAJOR)	\
-	"-" __stringify(minor))
-#endif
diff --git a/ANDROID_3.4.5/include/linux/mlx4/cmd.h b/ANDROID_3.4.5/include/linux/mlx4/cmd.h
deleted file mode 100644
index 9958ff2c..00000000
--- a/ANDROID_3.4.5/include/linux/mlx4/cmd.h
+++ /dev/null
@@ -1,230 +0,0 @@
-/*
- * Copyright (c) 2006 Cisco Systems, Inc.  All rights reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses.  You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the
- * OpenIB.org BSD license below:
- *
- *     Redistribution and use in source and binary forms, with or
- *     without modification, are permitted provided that the following
- *     conditions are met:
- *
- *      - Redistributions of source code must retain the above
- *        copyright notice, this list of conditions and the following
- *        disclaimer.
- *
- *      - Redistributions in binary form must reproduce the above
- *        copyright notice, this list of conditions and the following
- *        disclaimer in the documentation and/or other materials
- *        provided with the distribution.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
- * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
- * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
- */
-
-#ifndef MLX4_CMD_H
-#define MLX4_CMD_H
-
-#include <linux/dma-mapping.h>
-
-enum {
-	/* initialization and general commands */
-	MLX4_CMD_SYS_EN		 = 0x1,
-	MLX4_CMD_SYS_DIS	 = 0x2,
-	MLX4_CMD_MAP_FA		 = 0xfff,
-	MLX4_CMD_UNMAP_FA	 = 0xffe,
-	MLX4_CMD_RUN_FW		 = 0xff6,
-	MLX4_CMD_MOD_STAT_CFG	 = 0x34,
-	MLX4_CMD_QUERY_DEV_CAP	 = 0x3,
-	MLX4_CMD_QUERY_FW	 = 0x4,
-	MLX4_CMD_ENABLE_LAM	 = 0xff8,
-	MLX4_CMD_DISABLE_LAM	 = 0xff7,
-	MLX4_CMD_QUERY_DDR	 = 0x5,
-	MLX4_CMD_QUERY_ADAPTER	 = 0x6,
-	MLX4_CMD_INIT_HCA	 = 0x7,
-	MLX4_CMD_CLOSE_HCA	 = 0x8,
-	MLX4_CMD_INIT_PORT	 = 0x9,
-	MLX4_CMD_CLOSE_PORT	 = 0xa,
-	MLX4_CMD_QUERY_HCA	 = 0xb,
-	MLX4_CMD_QUERY_PORT	 = 0x43,
-	MLX4_CMD_SENSE_PORT	 = 0x4d,
-	MLX4_CMD_HW_HEALTH_CHECK = 0x50,
-	MLX4_CMD_SET_PORT	 = 0xc,
-	MLX4_CMD_SET_NODE	 = 0x5a,
-	MLX4_CMD_QUERY_FUNC	 = 0x56,
-	MLX4_CMD_ACCESS_DDR	 = 0x2e,
-	MLX4_CMD_MAP_ICM	 = 0xffa,
-	MLX4_CMD_UNMAP_ICM	 = 0xff9,
-	MLX4_CMD_MAP_ICM_AUX	 = 0xffc,
-	MLX4_CMD_UNMAP_ICM_AUX	 = 0xffb,
-	MLX4_CMD_SET_ICM_SIZE	 = 0xffd,
-	/*master notify fw on finish for slave's flr*/
-	MLX4_CMD_INFORM_FLR_DONE = 0x5b,
-
-	/* TPT commands */
-	MLX4_CMD_SW2HW_MPT	 = 0xd,
-	MLX4_CMD_QUERY_MPT	 = 0xe,
-	MLX4_CMD_HW2SW_MPT	 = 0xf,
-	MLX4_CMD_READ_MTT	 = 0x10,
-	MLX4_CMD_WRITE_MTT	 = 0x11,
-	MLX4_CMD_SYNC_TPT	 = 0x2f,
-
-	/* EQ commands */
-	MLX4_CMD_MAP_EQ		 = 0x12,
-	MLX4_CMD_SW2HW_EQ	 = 0x13,
-	MLX4_CMD_HW2SW_EQ	 = 0x14,
-	MLX4_CMD_QUERY_EQ	 = 0x15,
-
-	/* CQ commands */
-	MLX4_CMD_SW2HW_CQ	 = 0x16,
-	MLX4_CMD_HW2SW_CQ	 = 0x17,
-	MLX4_CMD_QUERY_CQ	 = 0x18,
-	MLX4_CMD_MODIFY_CQ	 = 0x2c,
-
-	/* SRQ commands */
-	MLX4_CMD_SW2HW_SRQ	 = 0x35,
-	MLX4_CMD_HW2SW_SRQ	 = 0x36,
-	MLX4_CMD_QUERY_SRQ	 = 0x37,
-	MLX4_CMD_ARM_SRQ	 = 0x40,
-
-	/* QP/EE commands */
-	MLX4_CMD_RST2INIT_QP	 = 0x19,
-	MLX4_CMD_INIT2RTR_QP	 = 0x1a,
-	MLX4_CMD_RTR2RTS_QP	 = 0x1b,
-	MLX4_CMD_RTS2RTS_QP	 = 0x1c,
-	MLX4_CMD_SQERR2RTS_QP	 = 0x1d,
-	MLX4_CMD_2ERR_QP	 = 0x1e,
-	MLX4_CMD_RTS2SQD_QP	 = 0x1f,
-	MLX4_CMD_SQD2SQD_QP	 = 0x38,
-	MLX4_CMD_SQD2RTS_QP	 = 0x20,
-	MLX4_CMD_2RST_QP	 = 0x21,
-	MLX4_CMD_QUERY_QP	 = 0x22,
-	MLX4_CMD_INIT2INIT_QP	 = 0x2d,
-	MLX4_CMD_SUSPEND_QP	 = 0x32,
-	MLX4_CMD_UNSUSPEND_QP	 = 0x33,
-	/* special QP and management commands */
-	MLX4_CMD_CONF_SPECIAL_QP = 0x23,
-	MLX4_CMD_MAD_IFC	 = 0x24,
-
-	/* multicast commands */
-	MLX4_CMD_READ_MCG	 = 0x25,
-	MLX4_CMD_WRITE_MCG	 = 0x26,
-	MLX4_CMD_MGID_HASH	 = 0x27,
-
-	/* miscellaneous commands */
-	MLX4_CMD_DIAG_RPRT	 = 0x30,
-	MLX4_CMD_NOP		 = 0x31,
-	MLX4_CMD_ACCESS_MEM	 = 0x2e,
-	MLX4_CMD_SET_VEP	 = 0x52,
-
-	/* Ethernet specific commands */
-	MLX4_CMD_SET_VLAN_FLTR	 = 0x47,
-	MLX4_CMD_SET_MCAST_FLTR	 = 0x48,
-	MLX4_CMD_DUMP_ETH_STATS	 = 0x49,
-
-	/* Communication channel commands */
-	MLX4_CMD_ARM_COMM_CHANNEL = 0x57,
-	MLX4_CMD_GEN_EQE	 = 0x58,
-
-	/* virtual commands */
-	MLX4_CMD_ALLOC_RES	 = 0xf00,
-	MLX4_CMD_FREE_RES	 = 0xf01,
-	MLX4_CMD_MCAST_ATTACH	 = 0xf05,
-	MLX4_CMD_UCAST_ATTACH	 = 0xf06,
-	MLX4_CMD_PROMISC         = 0xf08,
-	MLX4_CMD_QUERY_FUNC_CAP  = 0xf0a,
-	MLX4_CMD_QP_ATTACH	 = 0xf0b,
-
-	/* debug commands */
-	MLX4_CMD_QUERY_DEBUG_MSG = 0x2a,
-	MLX4_CMD_SET_DEBUG_MSG	 = 0x2b,
-
-	/* statistics commands */
-	MLX4_CMD_QUERY_IF_STAT	 = 0X54,
-	MLX4_CMD_SET_IF_STAT	 = 0X55,
-};
-
-enum {
-	MLX4_CMD_TIME_CLASS_A	= 10000,
-	MLX4_CMD_TIME_CLASS_B	= 10000,
-	MLX4_CMD_TIME_CLASS_C	= 10000,
-};
-
-enum {
-	MLX4_MAILBOX_SIZE	= 4096,
-	MLX4_ACCESS_MEM_ALIGN	= 256,
-};
-
-enum {
-	/* set port opcode modifiers */
-	MLX4_SET_PORT_GENERAL   = 0x0,
-	MLX4_SET_PORT_RQP_CALC  = 0x1,
-	MLX4_SET_PORT_MAC_TABLE = 0x2,
-	MLX4_SET_PORT_VLAN_TABLE = 0x3,
-	MLX4_SET_PORT_PRIO_MAP  = 0x4,
-	MLX4_SET_PORT_GID_TABLE = 0x5,
-};
-
-enum {
-	MLX4_CMD_WRAPPED,
-	MLX4_CMD_NATIVE
-};
-
-struct mlx4_dev;
-
-struct mlx4_cmd_mailbox {
-	void		       *buf;
-	dma_addr_t		dma;
-};
-
-int __mlx4_cmd(struct mlx4_dev *dev, u64 in_param, u64 *out_param,
-	       int out_is_imm, u32 in_modifier, u8 op_modifier,
-	       u16 op, unsigned long timeout, int native);
-
-/* Invoke a command with no output parameter */
-static inline int mlx4_cmd(struct mlx4_dev *dev, u64 in_param, u32 in_modifier,
-			   u8 op_modifier, u16 op, unsigned long timeout,
-			   int native)
-{
-	return __mlx4_cmd(dev, in_param, NULL, 0, in_modifier,
-			  op_modifier, op, timeout, native);
-}
-
-/* Invoke a command with an output mailbox */
-static inline int mlx4_cmd_box(struct mlx4_dev *dev, u64 in_param, u64 out_param,
-			       u32 in_modifier, u8 op_modifier, u16 op,
-			       unsigned long timeout, int native)
-{
-	return __mlx4_cmd(dev, in_param, &out_param, 0, in_modifier,
-			  op_modifier, op, timeout, native);
-}
-
-/*
- * Invoke a command with an immediate output parameter (and copy the
- * output into the caller's out_param pointer after the command
- * executes).
- */
-static inline int mlx4_cmd_imm(struct mlx4_dev *dev, u64 in_param, u64 *out_param,
-			       u32 in_modifier, u8 op_modifier, u16 op,
-			       unsigned long timeout, int native)
-{
-	return __mlx4_cmd(dev, in_param, out_param, 1, in_modifier,
-			  op_modifier, op, timeout, native);
-}
-
-struct mlx4_cmd_mailbox *mlx4_alloc_cmd_mailbox(struct mlx4_dev *dev);
-void mlx4_free_cmd_mailbox(struct mlx4_dev *dev, struct mlx4_cmd_mailbox *mailbox);
-
-u32 mlx4_comm_get_version(void);
-
-#define MLX4_COMM_GET_IF_REV(cmd_chan_ver) (u8)((cmd_chan_ver) >> 8)
-
-#endif /* MLX4_CMD_H */
diff --git a/ANDROID_3.4.5/include/linux/mlx4/cq.h b/ANDROID_3.4.5/include/linux/mlx4/cq.h
deleted file mode 100644
index 6f65b2c8..00000000
--- a/ANDROID_3.4.5/include/linux/mlx4/cq.h
+++ /dev/null
@@ -1,150 +0,0 @@
-/*
- * Copyright (c) 2007 Cisco Systems, Inc.  All rights reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses.  You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the
- * OpenIB.org BSD license below:
- *
- *     Redistribution and use in source and binary forms, with or
- *     without modification, are permitted provided that the following
- *     conditions are met:
- *
- *	- Redistributions of source code must retain the above
- *	  copyright notice, this list of conditions and the following
- *	  disclaimer.
- *
- *	- Redistributions in binary form must reproduce the above
- *	  copyright notice, this list of conditions and the following
- *	  disclaimer in the documentation and/or other materials
- *	  provided with the distribution.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
- * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
- * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
- */
-
-#ifndef MLX4_CQ_H
-#define MLX4_CQ_H
-
-#include <linux/types.h>
-
-#include <linux/mlx4/device.h>
-#include <linux/mlx4/doorbell.h>
-
-struct mlx4_cqe {
-	__be32			vlan_my_qpn;
-	__be32			immed_rss_invalid;
-	__be32			g_mlpath_rqpn;
-	__be16			sl_vid;
-	__be16			rlid;
-	__be16			status;
-	u8			ipv6_ext_mask;
-	u8			badfcs_enc;
-	__be32			byte_cnt;
-	__be16			wqe_index;
-	__be16			checksum;
-	u8			reserved[3];
-	u8			owner_sr_opcode;
-};
-
-struct mlx4_err_cqe {
-	__be32			my_qpn;
-	u32			reserved1[5];
-	__be16			wqe_index;
-	u8			vendor_err_syndrome;
-	u8			syndrome;
-	u8			reserved2[3];
-	u8			owner_sr_opcode;
-};
-
-enum {
-	MLX4_CQE_VLAN_PRESENT_MASK	= 1 << 29,
-	MLX4_CQE_QPN_MASK		= 0xffffff,
-};
-
-enum {
-	MLX4_CQE_OWNER_MASK	= 0x80,
-	MLX4_CQE_IS_SEND_MASK	= 0x40,
-	MLX4_CQE_OPCODE_MASK	= 0x1f
-};
-
-enum {
-	MLX4_CQE_SYNDROME_LOCAL_LENGTH_ERR		= 0x01,
-	MLX4_CQE_SYNDROME_LOCAL_QP_OP_ERR		= 0x02,
-	MLX4_CQE_SYNDROME_LOCAL_PROT_ERR		= 0x04,
-	MLX4_CQE_SYNDROME_WR_FLUSH_ERR			= 0x05,
-	MLX4_CQE_SYNDROME_MW_BIND_ERR			= 0x06,
-	MLX4_CQE_SYNDROME_BAD_RESP_ERR			= 0x10,
-	MLX4_CQE_SYNDROME_LOCAL_ACCESS_ERR		= 0x11,
-	MLX4_CQE_SYNDROME_REMOTE_INVAL_REQ_ERR		= 0x12,
-	MLX4_CQE_SYNDROME_REMOTE_ACCESS_ERR		= 0x13,
-	MLX4_CQE_SYNDROME_REMOTE_OP_ERR			= 0x14,
-	MLX4_CQE_SYNDROME_TRANSPORT_RETRY_EXC_ERR	= 0x15,
-	MLX4_CQE_SYNDROME_RNR_RETRY_EXC_ERR		= 0x16,
-	MLX4_CQE_SYNDROME_REMOTE_ABORTED_ERR		= 0x22,
-};
-
-enum {
-	MLX4_CQE_STATUS_IPV4		= 1 << 6,
-	MLX4_CQE_STATUS_IPV4F		= 1 << 7,
-	MLX4_CQE_STATUS_IPV6		= 1 << 8,
-	MLX4_CQE_STATUS_IPV4OPT		= 1 << 9,
-	MLX4_CQE_STATUS_TCP		= 1 << 10,
-	MLX4_CQE_STATUS_UDP		= 1 << 11,
-	MLX4_CQE_STATUS_IPOK		= 1 << 12,
-};
-
-enum {
-	MLX4_CQE_LLC                     = 1,
-	MLX4_CQE_SNAP                    = 1 << 1,
-	MLX4_CQE_BAD_FCS                 = 1 << 4,
-};
-
-static inline void mlx4_cq_arm(struct mlx4_cq *cq, u32 cmd,
-			       void __iomem *uar_page,
-			       spinlock_t *doorbell_lock)
-{
-	__be32 doorbell[2];
-	u32 sn;
-	u32 ci;
-
-	sn = cq->arm_sn & 3;
-	ci = cq->cons_index & 0xffffff;
-
-	*cq->arm_db = cpu_to_be32(sn << 28 | cmd | ci);
-
-	/*
-	 * Make sure that the doorbell record in host memory is
-	 * written before ringing the doorbell via PCI MMIO.
-	 */
-	wmb();
-
-	doorbell[0] = cpu_to_be32(sn << 28 | cmd | cq->cqn);
-	doorbell[1] = cpu_to_be32(ci);
-
-	mlx4_write64(doorbell, uar_page + MLX4_CQ_DOORBELL, doorbell_lock);
-}
-
-static inline void mlx4_cq_set_ci(struct mlx4_cq *cq)
-{
-	*cq->set_ci_db = cpu_to_be32(cq->cons_index & 0xffffff);
-}
-
-enum {
-	MLX4_CQ_DB_REQ_NOT_SOL		= 1 << 24,
-	MLX4_CQ_DB_REQ_NOT		= 2 << 24
-};
-
-int mlx4_cq_modify(struct mlx4_dev *dev, struct mlx4_cq *cq,
-		   u16 count, u16 period);
-int mlx4_cq_resize(struct mlx4_dev *dev, struct mlx4_cq *cq,
-		   int entries, struct mlx4_mtt *mtt);
-
-#endif /* MLX4_CQ_H */
diff --git a/ANDROID_3.4.5/include/linux/mlx4/device.h b/ANDROID_3.4.5/include/linux/mlx4/device.h
deleted file mode 100644
index 834c96c5..00000000
--- a/ANDROID_3.4.5/include/linux/mlx4/device.h
+++ /dev/null
@@ -1,654 +0,0 @@
-/*
- * Copyright (c) 2006, 2007 Cisco Systems, Inc.  All rights reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses.  You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the
- * OpenIB.org BSD license below:
- *
- *     Redistribution and use in source and binary forms, with or
- *     without modification, are permitted provided that the following
- *     conditions are met:
- *
- *	- Redistributions of source code must retain the above
- *	  copyright notice, this list of conditions and the following
- *	  disclaimer.
- *
- *	- Redistributions in binary form must reproduce the above
- *	  copyright notice, this list of conditions and the following
- *	  disclaimer in the documentation and/or other materials
- *	  provided with the distribution.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
- * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
- * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
- */
-
-#ifndef MLX4_DEVICE_H
-#define MLX4_DEVICE_H
-
-#include <linux/pci.h>
-#include <linux/completion.h>
-#include <linux/radix-tree.h>
-
-#include <linux/atomic.h>
-
-#define MAX_MSIX_P_PORT		17
-#define MAX_MSIX		64
-#define MSIX_LEGACY_SZ		4
-#define MIN_MSIX_P_PORT		5
-
-enum {
-	MLX4_FLAG_MSI_X		= 1 << 0,
-	MLX4_FLAG_OLD_PORT_CMDS	= 1 << 1,
-	MLX4_FLAG_MASTER	= 1 << 2,
-	MLX4_FLAG_SLAVE		= 1 << 3,
-	MLX4_FLAG_SRIOV		= 1 << 4,
-};
-
-enum {
-	MLX4_MAX_PORTS		= 2
-};
-
-enum {
-	MLX4_BOARD_ID_LEN = 64
-};
-
-enum {
-	MLX4_MAX_NUM_PF		= 16,
-	MLX4_MAX_NUM_VF		= 64,
-	MLX4_MFUNC_MAX		= 80,
-	MLX4_MFUNC_EQ_NUM	= 4,
-	MLX4_MFUNC_MAX_EQES     = 8,
-	MLX4_MFUNC_EQE_MASK     = (MLX4_MFUNC_MAX_EQES - 1)
-};
-
-enum {
-	MLX4_DEV_CAP_FLAG_RC		= 1LL <<  0,
-	MLX4_DEV_CAP_FLAG_UC		= 1LL <<  1,
-	MLX4_DEV_CAP_FLAG_UD		= 1LL <<  2,
-	MLX4_DEV_CAP_FLAG_XRC		= 1LL <<  3,
-	MLX4_DEV_CAP_FLAG_SRQ		= 1LL <<  6,
-	MLX4_DEV_CAP_FLAG_IPOIB_CSUM	= 1LL <<  7,
-	MLX4_DEV_CAP_FLAG_BAD_PKEY_CNTR	= 1LL <<  8,
-	MLX4_DEV_CAP_FLAG_BAD_QKEY_CNTR	= 1LL <<  9,
-	MLX4_DEV_CAP_FLAG_DPDP		= 1LL << 12,
-	MLX4_DEV_CAP_FLAG_BLH		= 1LL << 15,
-	MLX4_DEV_CAP_FLAG_MEM_WINDOW	= 1LL << 16,
-	MLX4_DEV_CAP_FLAG_APM		= 1LL << 17,
-	MLX4_DEV_CAP_FLAG_ATOMIC	= 1LL << 18,
-	MLX4_DEV_CAP_FLAG_RAW_MCAST	= 1LL << 19,
-	MLX4_DEV_CAP_FLAG_UD_AV_PORT	= 1LL << 20,
-	MLX4_DEV_CAP_FLAG_UD_MCAST	= 1LL << 21,
-	MLX4_DEV_CAP_FLAG_IBOE		= 1LL << 30,
-	MLX4_DEV_CAP_FLAG_UC_LOOPBACK	= 1LL << 32,
-	MLX4_DEV_CAP_FLAG_FCS_KEEP	= 1LL << 34,
-	MLX4_DEV_CAP_FLAG_WOL_PORT1	= 1LL << 37,
-	MLX4_DEV_CAP_FLAG_WOL_PORT2	= 1LL << 38,
-	MLX4_DEV_CAP_FLAG_UDP_RSS	= 1LL << 40,
-	MLX4_DEV_CAP_FLAG_VEP_UC_STEER	= 1LL << 41,
-	MLX4_DEV_CAP_FLAG_VEP_MC_STEER	= 1LL << 42,
-	MLX4_DEV_CAP_FLAG_COUNTERS	= 1LL << 48,
-	MLX4_DEV_CAP_FLAG_SENSE_SUPPORT	= 1LL << 55
-};
-
-#define MLX4_ATTR_EXTENDED_PORT_INFO	cpu_to_be16(0xff90)
-
-enum {
-	MLX4_BMME_FLAG_LOCAL_INV	= 1 <<  6,
-	MLX4_BMME_FLAG_REMOTE_INV	= 1 <<  7,
-	MLX4_BMME_FLAG_TYPE_2_WIN	= 1 <<  9,
-	MLX4_BMME_FLAG_RESERVED_LKEY	= 1 << 10,
-	MLX4_BMME_FLAG_FAST_REG_WR	= 1 << 11,
-};
-
-enum mlx4_event {
-	MLX4_EVENT_TYPE_COMP		   = 0x00,
-	MLX4_EVENT_TYPE_PATH_MIG	   = 0x01,
-	MLX4_EVENT_TYPE_COMM_EST	   = 0x02,
-	MLX4_EVENT_TYPE_SQ_DRAINED	   = 0x03,
-	MLX4_EVENT_TYPE_SRQ_QP_LAST_WQE	   = 0x13,
-	MLX4_EVENT_TYPE_SRQ_LIMIT	   = 0x14,
-	MLX4_EVENT_TYPE_CQ_ERROR	   = 0x04,
-	MLX4_EVENT_TYPE_WQ_CATAS_ERROR	   = 0x05,
-	MLX4_EVENT_TYPE_EEC_CATAS_ERROR	   = 0x06,
-	MLX4_EVENT_TYPE_PATH_MIG_FAILED	   = 0x07,
-	MLX4_EVENT_TYPE_WQ_INVAL_REQ_ERROR = 0x10,
-	MLX4_EVENT_TYPE_WQ_ACCESS_ERROR	   = 0x11,
-	MLX4_EVENT_TYPE_SRQ_CATAS_ERROR	   = 0x12,
-	MLX4_EVENT_TYPE_LOCAL_CATAS_ERROR  = 0x08,
-	MLX4_EVENT_TYPE_PORT_CHANGE	   = 0x09,
-	MLX4_EVENT_TYPE_EQ_OVERFLOW	   = 0x0f,
-	MLX4_EVENT_TYPE_ECC_DETECT	   = 0x0e,
-	MLX4_EVENT_TYPE_CMD		   = 0x0a,
-	MLX4_EVENT_TYPE_VEP_UPDATE	   = 0x19,
-	MLX4_EVENT_TYPE_COMM_CHANNEL	   = 0x18,
-	MLX4_EVENT_TYPE_FATAL_WARNING	   = 0x1b,
-	MLX4_EVENT_TYPE_FLR_EVENT	   = 0x1c,
-	MLX4_EVENT_TYPE_NONE		   = 0xff,
-};
-
-enum {
-	MLX4_PORT_CHANGE_SUBTYPE_DOWN	= 1,
-	MLX4_PORT_CHANGE_SUBTYPE_ACTIVE	= 4
-};
-
-enum {
-	MLX4_FATAL_WARNING_SUBTYPE_WARMING = 0,
-};
-
-enum {
-	MLX4_PERM_LOCAL_READ	= 1 << 10,
-	MLX4_PERM_LOCAL_WRITE	= 1 << 11,
-	MLX4_PERM_REMOTE_READ	= 1 << 12,
-	MLX4_PERM_REMOTE_WRITE	= 1 << 13,
-	MLX4_PERM_ATOMIC	= 1 << 14
-};
-
-enum {
-	MLX4_OPCODE_NOP			= 0x00,
-	MLX4_OPCODE_SEND_INVAL		= 0x01,
-	MLX4_OPCODE_RDMA_WRITE		= 0x08,
-	MLX4_OPCODE_RDMA_WRITE_IMM	= 0x09,
-	MLX4_OPCODE_SEND		= 0x0a,
-	MLX4_OPCODE_SEND_IMM		= 0x0b,
-	MLX4_OPCODE_LSO			= 0x0e,
-	MLX4_OPCODE_RDMA_READ		= 0x10,
-	MLX4_OPCODE_ATOMIC_CS		= 0x11,
-	MLX4_OPCODE_ATOMIC_FA		= 0x12,
-	MLX4_OPCODE_MASKED_ATOMIC_CS	= 0x14,
-	MLX4_OPCODE_MASKED_ATOMIC_FA	= 0x15,
-	MLX4_OPCODE_BIND_MW		= 0x18,
-	MLX4_OPCODE_FMR			= 0x19,
-	MLX4_OPCODE_LOCAL_INVAL		= 0x1b,
-	MLX4_OPCODE_CONFIG_CMD		= 0x1f,
-
-	MLX4_RECV_OPCODE_RDMA_WRITE_IMM	= 0x00,
-	MLX4_RECV_OPCODE_SEND		= 0x01,
-	MLX4_RECV_OPCODE_SEND_IMM	= 0x02,
-	MLX4_RECV_OPCODE_SEND_INVAL	= 0x03,
-
-	MLX4_CQE_OPCODE_ERROR		= 0x1e,
-	MLX4_CQE_OPCODE_RESIZE		= 0x16,
-};
-
-enum {
-	MLX4_STAT_RATE_OFFSET	= 5
-};
-
-enum mlx4_protocol {
-	MLX4_PROT_IB_IPV6 = 0,
-	MLX4_PROT_ETH,
-	MLX4_PROT_IB_IPV4,
-	MLX4_PROT_FCOE
-};
-
-enum {
-	MLX4_MTT_FLAG_PRESENT		= 1
-};
-
-enum mlx4_qp_region {
-	MLX4_QP_REGION_FW = 0,
-	MLX4_QP_REGION_ETH_ADDR,
-	MLX4_QP_REGION_FC_ADDR,
-	MLX4_QP_REGION_FC_EXCH,
-	MLX4_NUM_QP_REGION
-};
-
-enum mlx4_port_type {
-	MLX4_PORT_TYPE_NONE	= 0,
-	MLX4_PORT_TYPE_IB	= 1,
-	MLX4_PORT_TYPE_ETH	= 2,
-	MLX4_PORT_TYPE_AUTO	= 3
-};
-
-enum mlx4_special_vlan_idx {
-	MLX4_NO_VLAN_IDX        = 0,
-	MLX4_VLAN_MISS_IDX,
-	MLX4_VLAN_REGULAR
-};
-
-enum mlx4_steer_type {
-	MLX4_MC_STEER = 0,
-	MLX4_UC_STEER,
-	MLX4_NUM_STEERS
-};
-
-enum {
-	MLX4_NUM_FEXCH          = 64 * 1024,
-};
-
-enum {
-	MLX4_MAX_FAST_REG_PAGES = 511,
-};
-
-static inline u64 mlx4_fw_ver(u64 major, u64 minor, u64 subminor)
-{
-	return (major << 32) | (minor << 16) | subminor;
-}
-
-struct mlx4_caps {
-	u64			fw_ver;
-	u32			function;
-	int			num_ports;
-	int			vl_cap[MLX4_MAX_PORTS + 1];
-	int			ib_mtu_cap[MLX4_MAX_PORTS + 1];
-	__be32			ib_port_def_cap[MLX4_MAX_PORTS + 1];
-	u64			def_mac[MLX4_MAX_PORTS + 1];
-	int			eth_mtu_cap[MLX4_MAX_PORTS + 1];
-	int			gid_table_len[MLX4_MAX_PORTS + 1];
-	int			pkey_table_len[MLX4_MAX_PORTS + 1];
-	int			trans_type[MLX4_MAX_PORTS + 1];
-	int			vendor_oui[MLX4_MAX_PORTS + 1];
-	int			wavelength[MLX4_MAX_PORTS + 1];
-	u64			trans_code[MLX4_MAX_PORTS + 1];
-	int			local_ca_ack_delay;
-	int			num_uars;
-	u32			uar_page_size;
-	int			bf_reg_size;
-	int			bf_regs_per_page;
-	int			max_sq_sg;
-	int			max_rq_sg;
-	int			num_qps;
-	int			max_wqes;
-	int			max_sq_desc_sz;
-	int			max_rq_desc_sz;
-	int			max_qp_init_rdma;
-	int			max_qp_dest_rdma;
-	int			sqp_start;
-	int			num_srqs;
-	int			max_srq_wqes;
-	int			max_srq_sge;
-	int			reserved_srqs;
-	int			num_cqs;
-	int			max_cqes;
-	int			reserved_cqs;
-	int			num_eqs;
-	int			reserved_eqs;
-	int			num_comp_vectors;
-	int			comp_pool;
-	int			num_mpts;
-	int			max_fmr_maps;
-	int			num_mtts;
-	int			fmr_reserved_mtts;
-	int			reserved_mtts;
-	int			reserved_mrws;
-	int			reserved_uars;
-	int			num_mgms;
-	int			num_amgms;
-	int			reserved_mcgs;
-	int			num_qp_per_mgm;
-	int			num_pds;
-	int			reserved_pds;
-	int			max_xrcds;
-	int			reserved_xrcds;
-	int			mtt_entry_sz;
-	u32			max_msg_sz;
-	u32			page_size_cap;
-	u64			flags;
-	u32			bmme_flags;
-	u32			reserved_lkey;
-	u16			stat_rate_support;
-	u8			port_width_cap[MLX4_MAX_PORTS + 1];
-	int			max_gso_sz;
-	int                     reserved_qps_cnt[MLX4_NUM_QP_REGION];
-	int			reserved_qps;
-	int                     reserved_qps_base[MLX4_NUM_QP_REGION];
-	int                     log_num_macs;
-	int                     log_num_vlans;
-	int                     log_num_prios;
-	enum mlx4_port_type	port_type[MLX4_MAX_PORTS + 1];
-	u8			supported_type[MLX4_MAX_PORTS + 1];
-	u8                      suggested_type[MLX4_MAX_PORTS + 1];
-	u8                      default_sense[MLX4_MAX_PORTS + 1];
-	u32			port_mask[MLX4_MAX_PORTS + 1];
-	enum mlx4_port_type	possible_type[MLX4_MAX_PORTS + 1];
-	u32			max_counters;
-	u8			port_ib_mtu[MLX4_MAX_PORTS + 1];
-};
-
-struct mlx4_buf_list {
-	void		       *buf;
-	dma_addr_t		map;
-};
-
-struct mlx4_buf {
-	struct mlx4_buf_list	direct;
-	struct mlx4_buf_list   *page_list;
-	int			nbufs;
-	int			npages;
-	int			page_shift;
-};
-
-struct mlx4_mtt {
-	u32			offset;
-	int			order;
-	int			page_shift;
-};
-
-enum {
-	MLX4_DB_PER_PAGE = PAGE_SIZE / 4
-};
-
-struct mlx4_db_pgdir {
-	struct list_head	list;
-	DECLARE_BITMAP(order0, MLX4_DB_PER_PAGE);
-	DECLARE_BITMAP(order1, MLX4_DB_PER_PAGE / 2);
-	unsigned long	       *bits[2];
-	__be32		       *db_page;
-	dma_addr_t		db_dma;
-};
-
-struct mlx4_ib_user_db_page;
-
-struct mlx4_db {
-	__be32			*db;
-	union {
-		struct mlx4_db_pgdir		*pgdir;
-		struct mlx4_ib_user_db_page	*user_page;
-	}			u;
-	dma_addr_t		dma;
-	int			index;
-	int			order;
-};
-
-struct mlx4_hwq_resources {
-	struct mlx4_db		db;
-	struct mlx4_mtt		mtt;
-	struct mlx4_buf		buf;
-};
-
-struct mlx4_mr {
-	struct mlx4_mtt		mtt;
-	u64			iova;
-	u64			size;
-	u32			key;
-	u32			pd;
-	u32			access;
-	int			enabled;
-};
-
-struct mlx4_fmr {
-	struct mlx4_mr		mr;
-	struct mlx4_mpt_entry  *mpt;
-	__be64		       *mtts;
-	dma_addr_t		dma_handle;
-	int			max_pages;
-	int			max_maps;
-	int			maps;
-	u8			page_shift;
-};
-
-struct mlx4_uar {
-	unsigned long		pfn;
-	int			index;
-	struct list_head	bf_list;
-	unsigned		free_bf_bmap;
-	void __iomem	       *map;
-	void __iomem	       *bf_map;
-};
-
-struct mlx4_bf {
-	unsigned long		offset;
-	int			buf_size;
-	struct mlx4_uar	       *uar;
-	void __iomem	       *reg;
-};
-
-struct mlx4_cq {
-	void (*comp)		(struct mlx4_cq *);
-	void (*event)		(struct mlx4_cq *, enum mlx4_event);
-
-	struct mlx4_uar	       *uar;
-
-	u32			cons_index;
-
-	__be32		       *set_ci_db;
-	__be32		       *arm_db;
-	int			arm_sn;
-
-	int			cqn;
-	unsigned		vector;
-
-	atomic_t		refcount;
-	struct completion	free;
-};
-
-struct mlx4_qp {
-	void (*event)		(struct mlx4_qp *, enum mlx4_event);
-
-	int			qpn;
-
-	atomic_t		refcount;
-	struct completion	free;
-};
-
-struct mlx4_srq {
-	void (*event)		(struct mlx4_srq *, enum mlx4_event);
-
-	int			srqn;
-	int			max;
-	int			max_gs;
-	int			wqe_shift;
-
-	atomic_t		refcount;
-	struct completion	free;
-};
-
-struct mlx4_av {
-	__be32			port_pd;
-	u8			reserved1;
-	u8			g_slid;
-	__be16			dlid;
-	u8			reserved2;
-	u8			gid_index;
-	u8			stat_rate;
-	u8			hop_limit;
-	__be32			sl_tclass_flowlabel;
-	u8			dgid[16];
-};
-
-struct mlx4_eth_av {
-	__be32		port_pd;
-	u8		reserved1;
-	u8		smac_idx;
-	u16		reserved2;
-	u8		reserved3;
-	u8		gid_index;
-	u8		stat_rate;
-	u8		hop_limit;
-	__be32		sl_tclass_flowlabel;
-	u8		dgid[16];
-	u32		reserved4[2];
-	__be16		vlan;
-	u8		mac[6];
-};
-
-union mlx4_ext_av {
-	struct mlx4_av		ib;
-	struct mlx4_eth_av	eth;
-};
-
-struct mlx4_counter {
-	u8	reserved1[3];
-	u8	counter_mode;
-	__be32	num_ifc;
-	u32	reserved2[2];
-	__be64	rx_frames;
-	__be64	rx_bytes;
-	__be64	tx_frames;
-	__be64	tx_bytes;
-};
-
-struct mlx4_dev {
-	struct pci_dev	       *pdev;
-	unsigned long		flags;
-	unsigned long		num_slaves;
-	struct mlx4_caps	caps;
-	struct radix_tree_root	qp_table_tree;
-	u8			rev_id;
-	char			board_id[MLX4_BOARD_ID_LEN];
-	int			num_vfs;
-};
-
-struct mlx4_init_port_param {
-	int			set_guid0;
-	int			set_node_guid;
-	int			set_si_guid;
-	u16			mtu;
-	int			port_width_cap;
-	u16			vl_cap;
-	u16			max_gid;
-	u16			max_pkey;
-	u64			guid0;
-	u64			node_guid;
-	u64			si_guid;
-};
-
-#define mlx4_foreach_port(port, dev, type)				\
-	for ((port) = 1; (port) <= (dev)->caps.num_ports; (port)++)	\
-		if ((type) == (dev)->caps.port_mask[(port)])
-
-#define mlx4_foreach_ib_transport_port(port, dev)                         \
-	for ((port) = 1; (port) <= (dev)->caps.num_ports; (port)++)	  \
-		if (((dev)->caps.port_mask[port] == MLX4_PORT_TYPE_IB) || \
-			((dev)->caps.flags & MLX4_DEV_CAP_FLAG_IBOE))
-
-static inline int mlx4_is_master(struct mlx4_dev *dev)
-{
-	return dev->flags & MLX4_FLAG_MASTER;
-}
-
-static inline int mlx4_is_qp_reserved(struct mlx4_dev *dev, u32 qpn)
-{
-	return (qpn < dev->caps.sqp_start + 8);
-}
-
-static inline int mlx4_is_mfunc(struct mlx4_dev *dev)
-{
-	return dev->flags & (MLX4_FLAG_SLAVE | MLX4_FLAG_MASTER);
-}
-
-static inline int mlx4_is_slave(struct mlx4_dev *dev)
-{
-	return dev->flags & MLX4_FLAG_SLAVE;
-}
-
-int mlx4_buf_alloc(struct mlx4_dev *dev, int size, int max_direct,
-		   struct mlx4_buf *buf);
-void mlx4_buf_free(struct mlx4_dev *dev, int size, struct mlx4_buf *buf);
-static inline void *mlx4_buf_offset(struct mlx4_buf *buf, int offset)
-{
-	if (BITS_PER_LONG == 64 || buf->nbufs == 1)
-		return buf->direct.buf + offset;
-	else
-		return buf->page_list[offset >> PAGE_SHIFT].buf +
-			(offset & (PAGE_SIZE - 1));
-}
-
-int mlx4_pd_alloc(struct mlx4_dev *dev, u32 *pdn);
-void mlx4_pd_free(struct mlx4_dev *dev, u32 pdn);
-int mlx4_xrcd_alloc(struct mlx4_dev *dev, u32 *xrcdn);
-void mlx4_xrcd_free(struct mlx4_dev *dev, u32 xrcdn);
-
-int mlx4_uar_alloc(struct mlx4_dev *dev, struct mlx4_uar *uar);
-void mlx4_uar_free(struct mlx4_dev *dev, struct mlx4_uar *uar);
-int mlx4_bf_alloc(struct mlx4_dev *dev, struct mlx4_bf *bf);
-void mlx4_bf_free(struct mlx4_dev *dev, struct mlx4_bf *bf);
-
-int mlx4_mtt_init(struct mlx4_dev *dev, int npages, int page_shift,
-		  struct mlx4_mtt *mtt);
-void mlx4_mtt_cleanup(struct mlx4_dev *dev, struct mlx4_mtt *mtt);
-u64 mlx4_mtt_addr(struct mlx4_dev *dev, struct mlx4_mtt *mtt);
-
-int mlx4_mr_alloc(struct mlx4_dev *dev, u32 pd, u64 iova, u64 size, u32 access,
-		  int npages, int page_shift, struct mlx4_mr *mr);
-void mlx4_mr_free(struct mlx4_dev *dev, struct mlx4_mr *mr);
-int mlx4_mr_enable(struct mlx4_dev *dev, struct mlx4_mr *mr);
-int mlx4_write_mtt(struct mlx4_dev *dev, struct mlx4_mtt *mtt,
-		   int start_index, int npages, u64 *page_list);
-int mlx4_buf_write_mtt(struct mlx4_dev *dev, struct mlx4_mtt *mtt,
-		       struct mlx4_buf *buf);
-
-int mlx4_db_alloc(struct mlx4_dev *dev, struct mlx4_db *db, int order);
-void mlx4_db_free(struct mlx4_dev *dev, struct mlx4_db *db);
-
-int mlx4_alloc_hwq_res(struct mlx4_dev *dev, struct mlx4_hwq_resources *wqres,
-		       int size, int max_direct);
-void mlx4_free_hwq_res(struct mlx4_dev *mdev, struct mlx4_hwq_resources *wqres,
-		       int size);
-
-int mlx4_cq_alloc(struct mlx4_dev *dev, int nent, struct mlx4_mtt *mtt,
-		  struct mlx4_uar *uar, u64 db_rec, struct mlx4_cq *cq,
-		  unsigned vector, int collapsed);
-void mlx4_cq_free(struct mlx4_dev *dev, struct mlx4_cq *cq);
-
-int mlx4_qp_reserve_range(struct mlx4_dev *dev, int cnt, int align, int *base);
-void mlx4_qp_release_range(struct mlx4_dev *dev, int base_qpn, int cnt);
-
-int mlx4_qp_alloc(struct mlx4_dev *dev, int qpn, struct mlx4_qp *qp);
-void mlx4_qp_free(struct mlx4_dev *dev, struct mlx4_qp *qp);
-
-int mlx4_srq_alloc(struct mlx4_dev *dev, u32 pdn, u32 cqn, u16 xrcdn,
-		   struct mlx4_mtt *mtt, u64 db_rec, struct mlx4_srq *srq);
-void mlx4_srq_free(struct mlx4_dev *dev, struct mlx4_srq *srq);
-int mlx4_srq_arm(struct mlx4_dev *dev, struct mlx4_srq *srq, int limit_watermark);
-int mlx4_srq_query(struct mlx4_dev *dev, struct mlx4_srq *srq, int *limit_watermark);
-
-int mlx4_INIT_PORT(struct mlx4_dev *dev, int port);
-int mlx4_CLOSE_PORT(struct mlx4_dev *dev, int port);
-
-int mlx4_unicast_attach(struct mlx4_dev *dev, struct mlx4_qp *qp, u8 gid[16],
-			int block_mcast_loopback, enum mlx4_protocol prot);
-int mlx4_unicast_detach(struct mlx4_dev *dev, struct mlx4_qp *qp, u8 gid[16],
-			enum mlx4_protocol prot);
-int mlx4_multicast_attach(struct mlx4_dev *dev, struct mlx4_qp *qp, u8 gid[16],
-			  int block_mcast_loopback, enum mlx4_protocol protocol);
-int mlx4_multicast_detach(struct mlx4_dev *dev, struct mlx4_qp *qp, u8 gid[16],
-			  enum mlx4_protocol protocol);
-int mlx4_multicast_promisc_add(struct mlx4_dev *dev, u32 qpn, u8 port);
-int mlx4_multicast_promisc_remove(struct mlx4_dev *dev, u32 qpn, u8 port);
-int mlx4_unicast_promisc_add(struct mlx4_dev *dev, u32 qpn, u8 port);
-int mlx4_unicast_promisc_remove(struct mlx4_dev *dev, u32 qpn, u8 port);
-int mlx4_SET_MCAST_FLTR(struct mlx4_dev *dev, u8 port, u64 mac, u64 clear, u8 mode);
-
-int mlx4_register_mac(struct mlx4_dev *dev, u8 port, u64 mac);
-void mlx4_unregister_mac(struct mlx4_dev *dev, u8 port, u64 mac);
-int mlx4_replace_mac(struct mlx4_dev *dev, u8 port, int qpn, u64 new_mac);
-int mlx4_get_eth_qp(struct mlx4_dev *dev, u8 port, u64 mac, int *qpn);
-void mlx4_put_eth_qp(struct mlx4_dev *dev, u8 port, u64 mac, int qpn);
-void mlx4_set_stats_bitmap(struct mlx4_dev *dev, u64 *stats_bitmap);
-int mlx4_SET_PORT_general(struct mlx4_dev *dev, u8 port, int mtu,
-			  u8 pptx, u8 pfctx, u8 pprx, u8 pfcrx);
-int mlx4_SET_PORT_qpn_calc(struct mlx4_dev *dev, u8 port, u32 base_qpn,
-			   u8 promisc);
-int mlx4_find_cached_vlan(struct mlx4_dev *dev, u8 port, u16 vid, int *idx);
-int mlx4_register_vlan(struct mlx4_dev *dev, u8 port, u16 vlan, int *index);
-void mlx4_unregister_vlan(struct mlx4_dev *dev, u8 port, int index);
-
-int mlx4_map_phys_fmr(struct mlx4_dev *dev, struct mlx4_fmr *fmr, u64 *page_list,
-		      int npages, u64 iova, u32 *lkey, u32 *rkey);
-int mlx4_fmr_alloc(struct mlx4_dev *dev, u32 pd, u32 access, int max_pages,
-		   int max_maps, u8 page_shift, struct mlx4_fmr *fmr);
-int mlx4_fmr_enable(struct mlx4_dev *dev, struct mlx4_fmr *fmr);
-void mlx4_fmr_unmap(struct mlx4_dev *dev, struct mlx4_fmr *fmr,
-		    u32 *lkey, u32 *rkey);
-int mlx4_fmr_free(struct mlx4_dev *dev, struct mlx4_fmr *fmr);
-int mlx4_SYNC_TPT(struct mlx4_dev *dev);
-int mlx4_test_interrupts(struct mlx4_dev *dev);
-int mlx4_assign_eq(struct mlx4_dev *dev, char* name , int* vector);
-void mlx4_release_eq(struct mlx4_dev *dev, int vec);
-
-int mlx4_wol_read(struct mlx4_dev *dev, u64 *config, int port);
-int mlx4_wol_write(struct mlx4_dev *dev, u64 config, int port);
-
-int mlx4_counter_alloc(struct mlx4_dev *dev, u32 *idx);
-void mlx4_counter_free(struct mlx4_dev *dev, u32 idx);
-
-#endif /* MLX4_DEVICE_H */
diff --git a/ANDROID_3.4.5/include/linux/mlx4/doorbell.h b/ANDROID_3.4.5/include/linux/mlx4/doorbell.h
deleted file mode 100644
index f31bba27..00000000
--- a/ANDROID_3.4.5/include/linux/mlx4/doorbell.h
+++ /dev/null
@@ -1,86 +0,0 @@
-/*
- * Copyright (c) 2004 Topspin Communications.  All rights reserved.
- * Copyright (c) 2005 Sun Microsystems, Inc. All rights reserved.
- * Copyright (c) 2005 Mellanox Technologies. All rights reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses.  You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the
- * OpenIB.org BSD license below:
- *
- *     Redistribution and use in source and binary forms, with or
- *     without modification, are permitted provided that the following
- *     conditions are met:
- *
- *      - Redistributions of source code must retain the above
- *        copyright notice, this list of conditions and the following
- *        disclaimer.
- *
- *      - Redistributions in binary form must reproduce the above
- *        copyright notice, this list of conditions and the following
- *        disclaimer in the documentation and/or other materials
- *        provided with the distribution.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
- * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
- * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
- */
-
-#ifndef MLX4_DOORBELL_H
-#define MLX4_DOORBELL_H
-
-#include <linux/types.h>
-#include <linux/io.h>
-
-#define MLX4_SEND_DOORBELL    0x14
-#define MLX4_CQ_DOORBELL      0x20
-
-#if BITS_PER_LONG == 64
-/*
- * Assume that we can just write a 64-bit doorbell atomically.  s390
- * actually doesn't have writeq() but S/390 systems don't even have
- * PCI so we won't worry about it.
- */
-
-#define MLX4_DECLARE_DOORBELL_LOCK(name)
-#define MLX4_INIT_DOORBELL_LOCK(ptr)    do { } while (0)
-#define MLX4_GET_DOORBELL_LOCK(ptr)      (NULL)
-
-static inline void mlx4_write64(__be32 val[2], void __iomem *dest,
-				spinlock_t *doorbell_lock)
-{
-	__raw_writeq(*(u64 *) val, dest);
-}
-
-#else
-
-/*
- * Just fall back to a spinlock to protect the doorbell if
- * BITS_PER_LONG is 32 -- there's no portable way to do atomic 64-bit
- * MMIO writes.
- */
-
-#define MLX4_DECLARE_DOORBELL_LOCK(name) spinlock_t name;
-#define MLX4_INIT_DOORBELL_LOCK(ptr)     spin_lock_init(ptr)
-#define MLX4_GET_DOORBELL_LOCK(ptr)      (ptr)
-
-static inline void mlx4_write64(__be32 val[2], void __iomem *dest,
-				spinlock_t *doorbell_lock)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(doorbell_lock, flags);
-	__raw_writel((__force u32) val[0], dest);
-	__raw_writel((__force u32) val[1], dest + 4);
-	spin_unlock_irqrestore(doorbell_lock, flags);
-}
-
-#endif
-
-#endif /* MLX4_DOORBELL_H */
diff --git a/ANDROID_3.4.5/include/linux/mlx4/driver.h b/ANDROID_3.4.5/include/linux/mlx4/driver.h
deleted file mode 100644
index 5f1298b1..00000000
--- a/ANDROID_3.4.5/include/linux/mlx4/driver.h
+++ /dev/null
@@ -1,62 +0,0 @@
-/*
- * Copyright (c) 2006 Cisco Systems, Inc.  All rights reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses.  You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the
- * OpenIB.org BSD license below:
- *
- *     Redistribution and use in source and binary forms, with or
- *     without modification, are permitted provided that the following
- *     conditions are met:
- *
- *      - Redistributions of source code must retain the above
- *        copyright notice, this list of conditions and the following
- *        disclaimer.
- *
- *      - Redistributions in binary form must reproduce the above
- *        copyright notice, this list of conditions and the following
- *        disclaimer in the documentation and/or other materials
- *        provided with the distribution.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
- * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
- * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
- */
-
-#ifndef MLX4_DRIVER_H
-#define MLX4_DRIVER_H
-
-#include <linux/mlx4/device.h>
-
-struct mlx4_dev;
-
-enum mlx4_dev_event {
-	MLX4_DEV_EVENT_CATASTROPHIC_ERROR,
-	MLX4_DEV_EVENT_PORT_UP,
-	MLX4_DEV_EVENT_PORT_DOWN,
-	MLX4_DEV_EVENT_PORT_REINIT,
-};
-
-struct mlx4_interface {
-	void *			(*add)	 (struct mlx4_dev *dev);
-	void			(*remove)(struct mlx4_dev *dev, void *context);
-	void			(*event) (struct mlx4_dev *dev, void *context,
-					  enum mlx4_dev_event event, int port);
-	void *			(*get_dev)(struct mlx4_dev *dev, void *context, u8 port);
-	struct list_head	list;
-	enum mlx4_protocol	protocol;
-};
-
-int mlx4_register_interface(struct mlx4_interface *intf);
-void mlx4_unregister_interface(struct mlx4_interface *intf);
-
-void *mlx4_get_protocol_dev(struct mlx4_dev *dev, enum mlx4_protocol proto, int port);
-
-#endif /* MLX4_DRIVER_H */
diff --git a/ANDROID_3.4.5/include/linux/mlx4/qp.h b/ANDROID_3.4.5/include/linux/mlx4/qp.h
deleted file mode 100644
index 091f9e7d..00000000
--- a/ANDROID_3.4.5/include/linux/mlx4/qp.h
+++ /dev/null
@@ -1,364 +0,0 @@
-/*
- * Copyright (c) 2007 Cisco Systems, Inc.  All rights reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses.  You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the
- * OpenIB.org BSD license below:
- *
- *     Redistribution and use in source and binary forms, with or
- *     without modification, are permitted provided that the following
- *     conditions are met:
- *
- *	- Redistributions of source code must retain the above
- *	  copyright notice, this list of conditions and the following
- *	  disclaimer.
- *
- *	- Redistributions in binary form must reproduce the above
- *	  copyright notice, this list of conditions and the following
- *	  disclaimer in the documentation and/or other materials
- *	  provided with the distribution.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
- * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
- * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
- */
-
-#ifndef MLX4_QP_H
-#define MLX4_QP_H
-
-#include <linux/types.h>
-
-#include <linux/mlx4/device.h>
-
-#define MLX4_INVALID_LKEY	0x100
-
-enum mlx4_qp_optpar {
-	MLX4_QP_OPTPAR_ALT_ADDR_PATH		= 1 << 0,
-	MLX4_QP_OPTPAR_RRE			= 1 << 1,
-	MLX4_QP_OPTPAR_RAE			= 1 << 2,
-	MLX4_QP_OPTPAR_RWE			= 1 << 3,
-	MLX4_QP_OPTPAR_PKEY_INDEX		= 1 << 4,
-	MLX4_QP_OPTPAR_Q_KEY			= 1 << 5,
-	MLX4_QP_OPTPAR_RNR_TIMEOUT		= 1 << 6,
-	MLX4_QP_OPTPAR_PRIMARY_ADDR_PATH	= 1 << 7,
-	MLX4_QP_OPTPAR_SRA_MAX			= 1 << 8,
-	MLX4_QP_OPTPAR_RRA_MAX			= 1 << 9,
-	MLX4_QP_OPTPAR_PM_STATE			= 1 << 10,
-	MLX4_QP_OPTPAR_RETRY_COUNT		= 1 << 12,
-	MLX4_QP_OPTPAR_RNR_RETRY		= 1 << 13,
-	MLX4_QP_OPTPAR_ACK_TIMEOUT		= 1 << 14,
-	MLX4_QP_OPTPAR_SCHED_QUEUE		= 1 << 16,
-	MLX4_QP_OPTPAR_COUNTER_INDEX		= 1 << 20
-};
-
-enum mlx4_qp_state {
-	MLX4_QP_STATE_RST			= 0,
-	MLX4_QP_STATE_INIT			= 1,
-	MLX4_QP_STATE_RTR			= 2,
-	MLX4_QP_STATE_RTS			= 3,
-	MLX4_QP_STATE_SQER			= 4,
-	MLX4_QP_STATE_SQD			= 5,
-	MLX4_QP_STATE_ERR			= 6,
-	MLX4_QP_STATE_SQ_DRAINING		= 7,
-	MLX4_QP_NUM_STATE
-};
-
-enum {
-	MLX4_QP_ST_RC				= 0x0,
-	MLX4_QP_ST_UC				= 0x1,
-	MLX4_QP_ST_RD				= 0x2,
-	MLX4_QP_ST_UD				= 0x3,
-	MLX4_QP_ST_XRC				= 0x6,
-	MLX4_QP_ST_MLX				= 0x7
-};
-
-enum {
-	MLX4_QP_PM_MIGRATED			= 0x3,
-	MLX4_QP_PM_ARMED			= 0x0,
-	MLX4_QP_PM_REARM			= 0x1
-};
-
-enum {
-	/* params1 */
-	MLX4_QP_BIT_SRE				= 1 << 15,
-	MLX4_QP_BIT_SWE				= 1 << 14,
-	MLX4_QP_BIT_SAE				= 1 << 13,
-	/* params2 */
-	MLX4_QP_BIT_RRE				= 1 << 15,
-	MLX4_QP_BIT_RWE				= 1 << 14,
-	MLX4_QP_BIT_RAE				= 1 << 13,
-	MLX4_QP_BIT_RIC				= 1 <<	4,
-};
-
-enum {
-	MLX4_RSS_HASH_XOR			= 0,
-	MLX4_RSS_HASH_TOP			= 1,
-
-	MLX4_RSS_UDP_IPV6			= 1 << 0,
-	MLX4_RSS_UDP_IPV4			= 1 << 1,
-	MLX4_RSS_TCP_IPV6			= 1 << 2,
-	MLX4_RSS_IPV6				= 1 << 3,
-	MLX4_RSS_TCP_IPV4			= 1 << 4,
-	MLX4_RSS_IPV4				= 1 << 5,
-
-	/* offset of mlx4_rss_context within mlx4_qp_context.pri_path */
-	MLX4_RSS_OFFSET_IN_QPC_PRI_PATH		= 0x24,
-	/* offset of being RSS indirection QP within mlx4_qp_context.flags */
-	MLX4_RSS_QPC_FLAG_OFFSET		= 13,
-};
-
-struct mlx4_rss_context {
-	__be32			base_qpn;
-	__be32			default_qpn;
-	u16			reserved;
-	u8			hash_fn;
-	u8			flags;
-	__be32			rss_key[10];
-	__be32			base_qpn_udp;
-};
-
-struct mlx4_qp_path {
-	u8			fl;
-	u8			reserved1[2];
-	u8			pkey_index;
-	u8			counter_index;
-	u8			grh_mylmc;
-	__be16			rlid;
-	u8			ackto;
-	u8			mgid_index;
-	u8			static_rate;
-	u8			hop_limit;
-	__be32			tclass_flowlabel;
-	u8			rgid[16];
-	u8			sched_queue;
-	u8			vlan_index;
-	u8			reserved3[2];
-	u8			reserved4[2];
-	u8			dmac[6];
-};
-
-struct mlx4_qp_context {
-	__be32			flags;
-	__be32			pd;
-	u8			mtu_msgmax;
-	u8			rq_size_stride;
-	u8			sq_size_stride;
-	u8			rlkey;
-	__be32			usr_page;
-	__be32			local_qpn;
-	__be32			remote_qpn;
-	struct			mlx4_qp_path pri_path;
-	struct			mlx4_qp_path alt_path;
-	__be32			params1;
-	u32			reserved1;
-	__be32			next_send_psn;
-	__be32			cqn_send;
-	u32			reserved2[2];
-	__be32			last_acked_psn;
-	__be32			ssn;
-	__be32			params2;
-	__be32			rnr_nextrecvpsn;
-	__be32			xrcd;
-	__be32			cqn_recv;
-	__be64			db_rec_addr;
-	__be32			qkey;
-	__be32			srqn;
-	__be32			msn;
-	__be16			rq_wqe_counter;
-	__be16			sq_wqe_counter;
-	u32			reserved3[2];
-	__be32			param3;
-	__be32			nummmcpeers_basemkey;
-	u8			log_page_size;
-	u8			reserved4[2];
-	u8			mtt_base_addr_h;
-	__be32			mtt_base_addr_l;
-	u32			reserved5[10];
-};
-
-/* Which firmware version adds support for NEC (NoErrorCompletion) bit */
-#define MLX4_FW_VER_WQE_CTRL_NEC mlx4_fw_ver(2, 2, 232)
-
-enum {
-	MLX4_WQE_CTRL_NEC		= 1 << 29,
-	MLX4_WQE_CTRL_FENCE		= 1 << 6,
-	MLX4_WQE_CTRL_CQ_UPDATE		= 3 << 2,
-	MLX4_WQE_CTRL_SOLICITED		= 1 << 1,
-	MLX4_WQE_CTRL_IP_CSUM		= 1 << 4,
-	MLX4_WQE_CTRL_TCP_UDP_CSUM	= 1 << 5,
-	MLX4_WQE_CTRL_INS_VLAN		= 1 << 6,
-	MLX4_WQE_CTRL_STRONG_ORDER	= 1 << 7,
-	MLX4_WQE_CTRL_FORCE_LOOPBACK	= 1 << 0,
-};
-
-struct mlx4_wqe_ctrl_seg {
-	__be32			owner_opcode;
-	__be16			vlan_tag;
-	u8			ins_vlan;
-	u8			fence_size;
-	/*
-	 * High 24 bits are SRC remote buffer; low 8 bits are flags:
-	 * [7]   SO (strong ordering)
-	 * [5]   TCP/UDP checksum
-	 * [4]   IP checksum
-	 * [3:2] C (generate completion queue entry)
-	 * [1]   SE (solicited event)
-	 * [0]   FL (force loopback)
-	 */
-	union {
-		__be32			srcrb_flags;
-		__be16			srcrb_flags16[2];
-	};
-	/*
-	 * imm is immediate data for send/RDMA write w/ immediate;
-	 * also invalidation key for send with invalidate; input
-	 * modifier for WQEs on CCQs.
-	 */
-	__be32			imm;
-};
-
-enum {
-	MLX4_WQE_MLX_VL15	= 1 << 17,
-	MLX4_WQE_MLX_SLR	= 1 << 16
-};
-
-struct mlx4_wqe_mlx_seg {
-	u8			owner;
-	u8			reserved1[2];
-	u8			opcode;
-	u8			reserved2[3];
-	u8			size;
-	/*
-	 * [17]    VL15
-	 * [16]    SLR
-	 * [15:12] static rate
-	 * [11:8]  SL
-	 * [4]     ICRC
-	 * [3:2]   C
-	 * [0]     FL (force loopback)
-	 */
-	__be32			flags;
-	__be16			rlid;
-	u16			reserved3;
-};
-
-struct mlx4_wqe_datagram_seg {
-	__be32			av[8];
-	__be32			dqpn;
-	__be32			qkey;
-	__be16			vlan;
-	u8			mac[6];
-};
-
-struct mlx4_wqe_lso_seg {
-	__be32			mss_hdr_size;
-	__be32			header[0];
-};
-
-struct mlx4_wqe_bind_seg {
-	__be32			flags1;
-	__be32			flags2;
-	__be32			new_rkey;
-	__be32			lkey;
-	__be64			addr;
-	__be64			length;
-};
-
-enum {
-	MLX4_WQE_FMR_PERM_LOCAL_READ	= 1 << 27,
-	MLX4_WQE_FMR_PERM_LOCAL_WRITE	= 1 << 28,
-	MLX4_WQE_FMR_PERM_REMOTE_READ	= 1 << 29,
-	MLX4_WQE_FMR_PERM_REMOTE_WRITE	= 1 << 30,
-	MLX4_WQE_FMR_PERM_ATOMIC	= 1 << 31
-};
-
-struct mlx4_wqe_fmr_seg {
-	__be32			flags;
-	__be32			mem_key;
-	__be64			buf_list;
-	__be64			start_addr;
-	__be64			reg_len;
-	__be32			offset;
-	__be32			page_size;
-	u32			reserved[2];
-};
-
-struct mlx4_wqe_fmr_ext_seg {
-	u8			flags;
-	u8			reserved;
-	__be16			app_mask;
-	__be16			wire_app_tag;
-	__be16			mem_app_tag;
-	__be32			wire_ref_tag_base;
-	__be32			mem_ref_tag_base;
-};
-
-struct mlx4_wqe_local_inval_seg {
-	__be32			flags;
-	u32			reserved1;
-	__be32			mem_key;
-	u32			reserved2[2];
-	__be32			guest_id;
-	__be64			pa;
-};
-
-struct mlx4_wqe_raddr_seg {
-	__be64			raddr;
-	__be32			rkey;
-	u32			reserved;
-};
-
-struct mlx4_wqe_atomic_seg {
-	__be64			swap_add;
-	__be64			compare;
-};
-
-struct mlx4_wqe_masked_atomic_seg {
-	__be64			swap_add;
-	__be64			compare;
-	__be64			swap_add_mask;
-	__be64			compare_mask;
-};
-
-struct mlx4_wqe_data_seg {
-	__be32			byte_count;
-	__be32			lkey;
-	__be64			addr;
-};
-
-enum {
-	MLX4_INLINE_ALIGN	= 64,
-	MLX4_INLINE_SEG		= 1 << 31,
-};
-
-struct mlx4_wqe_inline_seg {
-	__be32			byte_count;
-};
-
-int mlx4_qp_modify(struct mlx4_dev *dev, struct mlx4_mtt *mtt,
-		   enum mlx4_qp_state cur_state, enum mlx4_qp_state new_state,
-		   struct mlx4_qp_context *context, enum mlx4_qp_optpar optpar,
-		   int sqd_event, struct mlx4_qp *qp);
-
-int mlx4_qp_query(struct mlx4_dev *dev, struct mlx4_qp *qp,
-		  struct mlx4_qp_context *context);
-
-int mlx4_qp_to_ready(struct mlx4_dev *dev, struct mlx4_mtt *mtt,
-		     struct mlx4_qp_context *context,
-		     struct mlx4_qp *qp, enum mlx4_qp_state *qp_state);
-
-static inline struct mlx4_qp *__mlx4_qp_lookup(struct mlx4_dev *dev, u32 qpn)
-{
-	return radix_tree_lookup(&dev->qp_table_tree, qpn & (dev->caps.num_qps - 1));
-}
-
-void mlx4_qp_remove(struct mlx4_dev *dev, struct mlx4_qp *qp);
-
-#endif /* MLX4_QP_H */
diff --git a/ANDROID_3.4.5/include/linux/mlx4/srq.h b/ANDROID_3.4.5/include/linux/mlx4/srq.h
deleted file mode 100644
index 799a0697..00000000
--- a/ANDROID_3.4.5/include/linux/mlx4/srq.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * Copyright (c) 2007 Cisco Systems, Inc.  All rights reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses.  You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the
- * OpenIB.org BSD license below:
- *
- *     Redistribution and use in source and binary forms, with or
- *     without modification, are permitted provided that the following
- *     conditions are met:
- *
- *	- Redistributions of source code must retain the above
- *	  copyright notice, this list of conditions and the following
- *	  disclaimer.
- *
- *	- Redistributions in binary form must reproduce the above
- *	  copyright notice, this list of conditions and the following
- *	  disclaimer in the documentation and/or other materials
- *	  provided with the distribution.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
- * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
- * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
- */
-
-#ifndef MLX4_SRQ_H
-#define MLX4_SRQ_H
-
-struct mlx4_wqe_srq_next_seg {
-	u16			reserved1;
-	__be16			next_wqe_index;
-	u32			reserved2[3];
-};
-
-#endif /* MLX4_SRQ_H */
diff --git a/ANDROID_3.4.5/include/linux/mm.h b/ANDROID_3.4.5/include/linux/mm.h
deleted file mode 100644
index 3bf2f379..00000000
--- a/ANDROID_3.4.5/include/linux/mm.h
+++ /dev/null
@@ -1,1638 +0,0 @@
-#ifndef _LINUX_MM_H
-#define _LINUX_MM_H
-
-#include <linux/errno.h>
-
-#ifdef __KERNEL__
-
-#include <linux/gfp.h>
-#include <linux/bug.h>
-#include <linux/list.h>
-#include <linux/mmzone.h>
-#include <linux/rbtree.h>
-#include <linux/prio_tree.h>
-#include <linux/atomic.h>
-#include <linux/debug_locks.h>
-#include <linux/mm_types.h>
-#include <linux/range.h>
-#include <linux/pfn.h>
-#include <linux/bit_spinlock.h>
-#include <linux/shrinker.h>
-
-struct mempolicy;
-struct anon_vma;
-struct file_ra_state;
-struct user_struct;
-struct writeback_control;
-
-#ifndef CONFIG_DISCONTIGMEM          /* Don't use mapnrs, do it properly */
-extern unsigned long max_mapnr;
-#endif
-
-extern unsigned long num_physpages;
-extern unsigned long totalram_pages;
-extern void * high_memory;
-extern int page_cluster;
-
-#ifdef CONFIG_SYSCTL
-extern int sysctl_legacy_va_layout;
-#else
-#define sysctl_legacy_va_layout 0
-#endif
-
-#include <asm/page.h>
-#include <asm/pgtable.h>
-#include <asm/processor.h>
-
-#define nth_page(page,n) pfn_to_page(page_to_pfn((page)) + (n))
-
-/* to align the pointer to the (next) page boundary */
-#define PAGE_ALIGN(addr) ALIGN(addr, PAGE_SIZE)
-
-/*
- * Linux kernel virtual memory manager primitives.
- * The idea being to have a "virtual" mm in the same way
- * we have a virtual fs - giving a cleaner interface to the
- * mm details, and allowing different kinds of memory mappings
- * (from shared memory to executable loading to arbitrary
- * mmap() functions).
- */
-
-extern struct kmem_cache *vm_area_cachep;
-
-#ifndef CONFIG_MMU
-extern struct rb_root nommu_region_tree;
-extern struct rw_semaphore nommu_region_sem;
-
-extern unsigned int kobjsize(const void *objp);
-#endif
-
-/*
- * vm_flags in vm_area_struct, see mm_types.h.
- */
-#define VM_READ		0x00000001	/* currently active flags */
-#define VM_WRITE	0x00000002
-#define VM_EXEC		0x00000004
-#define VM_SHARED	0x00000008
-
-/* mprotect() hardcodes VM_MAYREAD >> 4 == VM_READ, and so for r/w/x bits. */
-#define VM_MAYREAD	0x00000010	/* limits for mprotect() etc */
-#define VM_MAYWRITE	0x00000020
-#define VM_MAYEXEC	0x00000040
-#define VM_MAYSHARE	0x00000080
-
-#define VM_GROWSDOWN	0x00000100	/* general info on the segment */
-#if defined(CONFIG_STACK_GROWSUP) || defined(CONFIG_IA64)
-#define VM_GROWSUP	0x00000200
-#else
-#define VM_GROWSUP	0x00000000
-#define VM_NOHUGEPAGE	0x00000200	/* MADV_NOHUGEPAGE marked this vma */
-#endif
-#define VM_PFNMAP	0x00000400	/* Page-ranges managed without "struct page", just pure PFN */
-#define VM_DENYWRITE	0x00000800	/* ETXTBSY on write attempts.. */
-
-#define VM_EXECUTABLE	0x00001000
-#define VM_LOCKED	0x00002000
-#define VM_IO           0x00004000	/* Memory mapped I/O or similar */
-
-					/* Used by sys_madvise() */
-#define VM_SEQ_READ	0x00008000	/* App will access data sequentially */
-#define VM_RAND_READ	0x00010000	/* App will not benefit from clustered reads */
-
-#define VM_DONTCOPY	0x00020000      /* Do not copy this vma on fork */
-#define VM_DONTEXPAND	0x00040000	/* Cannot expand with mremap() */
-#define VM_RESERVED	0x00080000	/* Count as reserved_vm like IO */
-#define VM_ACCOUNT	0x00100000	/* Is a VM accounted object */
-#define VM_NORESERVE	0x00200000	/* should the VM suppress accounting */
-#define VM_HUGETLB	0x00400000	/* Huge TLB Page VM */
-#define VM_NONLINEAR	0x00800000	/* Is non-linear (remap_file_pages) */
-#ifndef CONFIG_TRANSPARENT_HUGEPAGE
-#define VM_MAPPED_COPY	0x01000000	/* T if mapped copy of data (nommu mmap) */
-#else
-#define VM_HUGEPAGE	0x01000000	/* MADV_HUGEPAGE marked this vma */
-#endif
-#define VM_INSERTPAGE	0x02000000	/* The vma has had "vm_insert_page()" done on it */
-#define VM_NODUMP	0x04000000	/* Do not include in the core dump */
-
-#define VM_CAN_NONLINEAR 0x08000000	/* Has ->fault & does nonlinear pages */
-#define VM_MIXEDMAP	0x10000000	/* Can contain "struct page" and pure PFN pages */
-#define VM_SAO		0x20000000	/* Strong Access Ordering (powerpc) */
-#define VM_PFN_AT_MMAP	0x40000000	/* PFNMAP vma that is fully mapped at mmap time */
-#define VM_MERGEABLE	0x80000000	/* KSM may merge identical pages */
-
-/* Bits set in the VMA until the stack is in its final location */
-#define VM_STACK_INCOMPLETE_SETUP	(VM_RAND_READ | VM_SEQ_READ)
-
-#ifndef VM_STACK_DEFAULT_FLAGS		/* arch can override this */
-#define VM_STACK_DEFAULT_FLAGS VM_DATA_DEFAULT_FLAGS
-#endif
-
-#ifdef CONFIG_STACK_GROWSUP
-#define VM_STACK_FLAGS	(VM_GROWSUP | VM_STACK_DEFAULT_FLAGS | VM_ACCOUNT)
-#else
-#define VM_STACK_FLAGS	(VM_GROWSDOWN | VM_STACK_DEFAULT_FLAGS | VM_ACCOUNT)
-#endif
-
-#define VM_READHINTMASK			(VM_SEQ_READ | VM_RAND_READ)
-#define VM_ClearReadHint(v)		(v)->vm_flags &= ~VM_READHINTMASK
-#define VM_NormalReadHint(v)		(!((v)->vm_flags & VM_READHINTMASK))
-#define VM_SequentialReadHint(v)	((v)->vm_flags & VM_SEQ_READ)
-#define VM_RandomReadHint(v)		((v)->vm_flags & VM_RAND_READ)
-
-/*
- * Special vmas that are non-mergable, non-mlock()able.
- * Note: mm/huge_memory.c VM_NO_THP depends on this definition.
- */
-#define VM_SPECIAL (VM_IO | VM_DONTEXPAND | VM_RESERVED | VM_PFNMAP)
-
-/*
- * mapping from the currently active vm_flags protection bits (the
- * low four bits) to a page protection mask..
- */
-extern pgprot_t protection_map[16];
-
-#define FAULT_FLAG_WRITE	0x01	/* Fault was a write access */
-#define FAULT_FLAG_NONLINEAR	0x02	/* Fault was via a nonlinear mapping */
-#define FAULT_FLAG_MKWRITE	0x04	/* Fault was mkwrite of existing pte */
-#define FAULT_FLAG_ALLOW_RETRY	0x08	/* Retry fault if blocking */
-#define FAULT_FLAG_RETRY_NOWAIT	0x10	/* Don't drop mmap_sem and wait when retrying */
-#define FAULT_FLAG_KILLABLE	0x20	/* The fault task is in SIGKILL killable region */
-
-/*
- * This interface is used by x86 PAT code to identify a pfn mapping that is
- * linear over entire vma. This is to optimize PAT code that deals with
- * marking the physical region with a particular prot. This is not for generic
- * mm use. Note also that this check will not work if the pfn mapping is
- * linear for a vma starting at physical address 0. In which case PAT code
- * falls back to slow path of reserving physical range page by page.
- */
-static inline int is_linear_pfn_mapping(struct vm_area_struct *vma)
-{
-	return !!(vma->vm_flags & VM_PFN_AT_MMAP);
-}
-
-static inline int is_pfn_mapping(struct vm_area_struct *vma)
-{
-	return !!(vma->vm_flags & VM_PFNMAP);
-}
-
-/*
- * vm_fault is filled by the the pagefault handler and passed to the vma's
- * ->fault function. The vma's ->fault is responsible for returning a bitmask
- * of VM_FAULT_xxx flags that give details about how the fault was handled.
- *
- * pgoff should be used in favour of virtual_address, if possible. If pgoff
- * is used, one may set VM_CAN_NONLINEAR in the vma->vm_flags to get nonlinear
- * mapping support.
- */
-struct vm_fault {
-	unsigned int flags;		/* FAULT_FLAG_xxx flags */
-	pgoff_t pgoff;			/* Logical page offset based on vma */
-	void __user *virtual_address;	/* Faulting virtual address */
-
-	struct page *page;		/* ->fault handlers should return a
-					 * page here, unless VM_FAULT_NOPAGE
-					 * is set (which is also implied by
-					 * VM_FAULT_ERROR).
-					 */
-};
-
-/*
- * These are the virtual MM functions - opening of an area, closing and
- * unmapping it (needed to keep files on disk up-to-date etc), pointer
- * to the functions called when a no-page or a wp-page exception occurs. 
- */
-struct vm_operations_struct {
-	void (*open)(struct vm_area_struct * area);
-	void (*close)(struct vm_area_struct * area);
-	int (*fault)(struct vm_area_struct *vma, struct vm_fault *vmf);
-
-	/* notification that a previously read-only page is about to become
-	 * writable, if an error is returned it will cause a SIGBUS */
-	int (*page_mkwrite)(struct vm_area_struct *vma, struct vm_fault *vmf);
-
-	/* called by access_process_vm when get_user_pages() fails, typically
-	 * for use by special VMAs that can switch between memory and hardware
-	 */
-	int (*access)(struct vm_area_struct *vma, unsigned long addr,
-		      void *buf, int len, int write);
-#ifdef CONFIG_NUMA
-	/*
-	 * set_policy() op must add a reference to any non-NULL @new mempolicy
-	 * to hold the policy upon return.  Caller should pass NULL @new to
-	 * remove a policy and fall back to surrounding context--i.e. do not
-	 * install a MPOL_DEFAULT policy, nor the task or system default
-	 * mempolicy.
-	 */
-	int (*set_policy)(struct vm_area_struct *vma, struct mempolicy *new);
-
-	/*
-	 * get_policy() op must add reference [mpol_get()] to any policy at
-	 * (vma,addr) marked as MPOL_SHARED.  The shared policy infrastructure
-	 * in mm/mempolicy.c will do this automatically.
-	 * get_policy() must NOT add a ref if the policy at (vma,addr) is not
-	 * marked as MPOL_SHARED. vma policies are protected by the mmap_sem.
-	 * If no [shared/vma] mempolicy exists at the addr, get_policy() op
-	 * must return NULL--i.e., do not "fallback" to task or system default
-	 * policy.
-	 */
-	struct mempolicy *(*get_policy)(struct vm_area_struct *vma,
-					unsigned long addr);
-	int (*migrate)(struct vm_area_struct *vma, const nodemask_t *from,
-		const nodemask_t *to, unsigned long flags);
-#endif
-};
-
-struct mmu_gather;
-struct inode;
-
-#define page_private(page)		((page)->private)
-#define set_page_private(page, v)	((page)->private = (v))
-
-/*
- * FIXME: take this include out, include page-flags.h in
- * files which need it (119 of them)
- */
-#include <linux/page-flags.h>
-#include <linux/huge_mm.h>
-
-/*
- * Methods to modify the page usage count.
- *
- * What counts for a page usage:
- * - cache mapping   (page->mapping)
- * - private data    (page->private)
- * - page mapped in a task's page tables, each mapping
- *   is counted separately
- *
- * Also, many kernel routines increase the page count before a critical
- * routine so they can be sure the page doesn't go away from under them.
- */
-
-/*
- * Drop a ref, return true if the refcount fell to zero (the page has no users)
- */
-static inline int put_page_testzero(struct page *page)
-{
-	VM_BUG_ON(atomic_read(&page->_count) == 0);
-	return atomic_dec_and_test(&page->_count);
-}
-
-/*
- * Try to grab a ref unless the page has a refcount of zero, return false if
- * that is the case.
- */
-static inline int get_page_unless_zero(struct page *page)
-{
-	return atomic_inc_not_zero(&page->_count);
-}
-
-extern int page_is_ram(unsigned long pfn);
-
-/* Support for virtually mapped pages */
-struct page *vmalloc_to_page(const void *addr);
-unsigned long vmalloc_to_pfn(const void *addr);
-
-/*
- * Determine if an address is within the vmalloc range
- *
- * On nommu, vmalloc/vfree wrap through kmalloc/kfree directly, so there
- * is no special casing required.
- */
-static inline int is_vmalloc_addr(const void *x)
-{
-#ifdef CONFIG_MMU
-	unsigned long addr = (unsigned long)x;
-
-	return addr >= VMALLOC_START && addr < VMALLOC_END;
-#else
-	return 0;
-#endif
-}
-#ifdef CONFIG_MMU
-extern int is_vmalloc_or_module_addr(const void *x);
-#else
-static inline int is_vmalloc_or_module_addr(const void *x)
-{
-	return 0;
-}
-#endif
-
-static inline void compound_lock(struct page *page)
-{
-#ifdef CONFIG_TRANSPARENT_HUGEPAGE
-	bit_spin_lock(PG_compound_lock, &page->flags);
-#endif
-}
-
-static inline void compound_unlock(struct page *page)
-{
-#ifdef CONFIG_TRANSPARENT_HUGEPAGE
-	bit_spin_unlock(PG_compound_lock, &page->flags);
-#endif
-}
-
-static inline unsigned long compound_lock_irqsave(struct page *page)
-{
-	unsigned long uninitialized_var(flags);
-#ifdef CONFIG_TRANSPARENT_HUGEPAGE
-	local_irq_save(flags);
-	compound_lock(page);
-#endif
-	return flags;
-}
-
-static inline void compound_unlock_irqrestore(struct page *page,
-					      unsigned long flags)
-{
-#ifdef CONFIG_TRANSPARENT_HUGEPAGE
-	compound_unlock(page);
-	local_irq_restore(flags);
-#endif
-}
-
-static inline struct page *compound_head(struct page *page)
-{
-	if (unlikely(PageTail(page)))
-		return page->first_page;
-	return page;
-}
-
-/*
- * The atomic page->_mapcount, starts from -1: so that transitions
- * both from it and to it can be tracked, using atomic_inc_and_test
- * and atomic_add_negative(-1).
- */
-static inline void reset_page_mapcount(struct page *page)
-{
-	atomic_set(&(page)->_mapcount, -1);
-}
-
-static inline int page_mapcount(struct page *page)
-{
-	return atomic_read(&(page)->_mapcount) + 1;
-}
-
-static inline int page_count(struct page *page)
-{
-	return atomic_read(&compound_head(page)->_count);
-}
-
-static inline void get_huge_page_tail(struct page *page)
-{
-	/*
-	 * __split_huge_page_refcount() cannot run
-	 * from under us.
-	 */
-	VM_BUG_ON(page_mapcount(page) < 0);
-	VM_BUG_ON(atomic_read(&page->_count) != 0);
-	atomic_inc(&page->_mapcount);
-}
-
-extern bool __get_page_tail(struct page *page);
-
-static inline void get_page(struct page *page)
-{
-	if (unlikely(PageTail(page)))
-		if (likely(__get_page_tail(page)))
-			return;
-	/*
-	 * Getting a normal page or the head of a compound page
-	 * requires to already have an elevated page->_count.
-	 */
-	VM_BUG_ON(atomic_read(&page->_count) <= 0);
-	atomic_inc(&page->_count);
-}
-
-static inline struct page *virt_to_head_page(const void *x)
-{
-	struct page *page = virt_to_page(x);
-	return compound_head(page);
-}
-
-/*
- * Setup the page count before being freed into the page allocator for
- * the first time (boot or memory hotplug)
- */
-static inline void init_page_count(struct page *page)
-{
-	atomic_set(&page->_count, 1);
-}
-
-/*
- * PageBuddy() indicate that the page is free and in the buddy system
- * (see mm/page_alloc.c).
- *
- * PAGE_BUDDY_MAPCOUNT_VALUE must be <= -2 but better not too close to
- * -2 so that an underflow of the page_mapcount() won't be mistaken
- * for a genuine PAGE_BUDDY_MAPCOUNT_VALUE. -128 can be created very
- * efficiently by most CPU architectures.
- */
-#define PAGE_BUDDY_MAPCOUNT_VALUE (-128)
-
-static inline int PageBuddy(struct page *page)
-{
-	return atomic_read(&page->_mapcount) == PAGE_BUDDY_MAPCOUNT_VALUE;
-}
-
-static inline void __SetPageBuddy(struct page *page)
-{
-	VM_BUG_ON(atomic_read(&page->_mapcount) != -1);
-	atomic_set(&page->_mapcount, PAGE_BUDDY_MAPCOUNT_VALUE);
-}
-
-static inline void __ClearPageBuddy(struct page *page)
-{
-	VM_BUG_ON(!PageBuddy(page));
-	atomic_set(&page->_mapcount, -1);
-}
-
-void put_page(struct page *page);
-void put_pages_list(struct list_head *pages);
-
-void split_page(struct page *page, unsigned int order);
-int split_free_page(struct page *page);
-
-/*
- * Compound pages have a destructor function.  Provide a
- * prototype for that function and accessor functions.
- * These are _only_ valid on the head of a PG_compound page.
- */
-typedef void compound_page_dtor(struct page *);
-
-static inline void set_compound_page_dtor(struct page *page,
-						compound_page_dtor *dtor)
-{
-	page[1].lru.next = (void *)dtor;
-}
-
-static inline compound_page_dtor *get_compound_page_dtor(struct page *page)
-{
-	return (compound_page_dtor *)page[1].lru.next;
-}
-
-static inline int compound_order(struct page *page)
-{
-	if (!PageHead(page))
-		return 0;
-	return (unsigned long)page[1].lru.prev;
-}
-
-static inline int compound_trans_order(struct page *page)
-{
-	int order;
-	unsigned long flags;
-
-	if (!PageHead(page))
-		return 0;
-
-	flags = compound_lock_irqsave(page);
-	order = compound_order(page);
-	compound_unlock_irqrestore(page, flags);
-	return order;
-}
-
-static inline void set_compound_order(struct page *page, unsigned long order)
-{
-	page[1].lru.prev = (void *)order;
-}
-
-#ifdef CONFIG_MMU
-/*
- * Do pte_mkwrite, but only if the vma says VM_WRITE.  We do this when
- * servicing faults for write access.  In the normal case, do always want
- * pte_mkwrite.  But get_user_pages can cause write faults for mappings
- * that do not have writing enabled, when used by access_process_vm.
- */
-static inline pte_t maybe_mkwrite(pte_t pte, struct vm_area_struct *vma)
-{
-	if (likely(vma->vm_flags & VM_WRITE))
-		pte = pte_mkwrite(pte);
-	return pte;
-}
-#endif
-
-/*
- * Multiple processes may "see" the same page. E.g. for untouched
- * mappings of /dev/null, all processes see the same page full of
- * zeroes, and text pages of executables and shared libraries have
- * only one copy in memory, at most, normally.
- *
- * For the non-reserved pages, page_count(page) denotes a reference count.
- *   page_count() == 0 means the page is free. page->lru is then used for
- *   freelist management in the buddy allocator.
- *   page_count() > 0  means the page has been allocated.
- *
- * Pages are allocated by the slab allocator in order to provide memory
- * to kmalloc and kmem_cache_alloc. In this case, the management of the
- * page, and the fields in 'struct page' are the responsibility of mm/slab.c
- * unless a particular usage is carefully commented. (the responsibility of
- * freeing the kmalloc memory is the caller's, of course).
- *
- * A page may be used by anyone else who does a __get_free_page().
- * In this case, page_count still tracks the references, and should only
- * be used through the normal accessor functions. The top bits of page->flags
- * and page->virtual store page management information, but all other fields
- * are unused and could be used privately, carefully. The management of this
- * page is the responsibility of the one who allocated it, and those who have
- * subsequently been given references to it.
- *
- * The other pages (we may call them "pagecache pages") are completely
- * managed by the Linux memory manager: I/O, buffers, swapping etc.
- * The following discussion applies only to them.
- *
- * A pagecache page contains an opaque `private' member, which belongs to the
- * page's address_space. Usually, this is the address of a circular list of
- * the page's disk buffers. PG_private must be set to tell the VM to call
- * into the filesystem to release these pages.
- *
- * A page may belong to an inode's memory mapping. In this case, page->mapping
- * is the pointer to the inode, and page->index is the file offset of the page,
- * in units of PAGE_CACHE_SIZE.
- *
- * If pagecache pages are not associated with an inode, they are said to be
- * anonymous pages. These may become associated with the swapcache, and in that
- * case PG_swapcache is set, and page->private is an offset into the swapcache.
- *
- * In either case (swapcache or inode backed), the pagecache itself holds one
- * reference to the page. Setting PG_private should also increment the
- * refcount. The each user mapping also has a reference to the page.
- *
- * The pagecache pages are stored in a per-mapping radix tree, which is
- * rooted at mapping->page_tree, and indexed by offset.
- * Where 2.4 and early 2.6 kernels kept dirty/clean pages in per-address_space
- * lists, we instead now tag pages as dirty/writeback in the radix tree.
- *
- * All pagecache pages may be subject to I/O:
- * - inode pages may need to be read from disk,
- * - inode pages which have been modified and are MAP_SHARED may need
- *   to be written back to the inode on disk,
- * - anonymous pages (including MAP_PRIVATE file mappings) which have been
- *   modified may need to be swapped out to swap space and (later) to be read
- *   back into memory.
- */
-
-/*
- * The zone field is never updated after free_area_init_core()
- * sets it, so none of the operations on it need to be atomic.
- */
-
-
-/*
- * page->flags layout:
- *
- * There are three possibilities for how page->flags get
- * laid out.  The first is for the normal case, without
- * sparsemem.  The second is for sparsemem when there is
- * plenty of space for node and section.  The last is when
- * we have run out of space and have to fall back to an
- * alternate (slower) way of determining the node.
- *
- * No sparsemem or sparsemem vmemmap: |       NODE     | ZONE | ... | FLAGS |
- * classic sparse with space for node:| SECTION | NODE | ZONE | ... | FLAGS |
- * classic sparse no space for node:  | SECTION |     ZONE    | ... | FLAGS |
- */
-#if defined(CONFIG_SPARSEMEM) && !defined(CONFIG_SPARSEMEM_VMEMMAP)
-#define SECTIONS_WIDTH		SECTIONS_SHIFT
-#else
-#define SECTIONS_WIDTH		0
-#endif
-
-#define ZONES_WIDTH		ZONES_SHIFT
-
-#if SECTIONS_WIDTH+ZONES_WIDTH+NODES_SHIFT <= BITS_PER_LONG - NR_PAGEFLAGS
-#define NODES_WIDTH		NODES_SHIFT
-#else
-#ifdef CONFIG_SPARSEMEM_VMEMMAP
-#error "Vmemmap: No space for nodes field in page flags"
-#endif
-#define NODES_WIDTH		0
-#endif
-
-/* Page flags: | [SECTION] | [NODE] | ZONE | ... | FLAGS | */
-#define SECTIONS_PGOFF		((sizeof(unsigned long)*8) - SECTIONS_WIDTH)
-#define NODES_PGOFF		(SECTIONS_PGOFF - NODES_WIDTH)
-#define ZONES_PGOFF		(NODES_PGOFF - ZONES_WIDTH)
-
-/*
- * We are going to use the flags for the page to node mapping if its in
- * there.  This includes the case where there is no node, so it is implicit.
- */
-#if !(NODES_WIDTH > 0 || NODES_SHIFT == 0)
-#define NODE_NOT_IN_PAGE_FLAGS
-#endif
-
-/*
- * Define the bit shifts to access each section.  For non-existent
- * sections we define the shift as 0; that plus a 0 mask ensures
- * the compiler will optimise away reference to them.
- */
-#define SECTIONS_PGSHIFT	(SECTIONS_PGOFF * (SECTIONS_WIDTH != 0))
-#define NODES_PGSHIFT		(NODES_PGOFF * (NODES_WIDTH != 0))
-#define ZONES_PGSHIFT		(ZONES_PGOFF * (ZONES_WIDTH != 0))
-
-/* NODE:ZONE or SECTION:ZONE is used to ID a zone for the buddy allocator */
-#ifdef NODE_NOT_IN_PAGE_FLAGS
-#define ZONEID_SHIFT		(SECTIONS_SHIFT + ZONES_SHIFT)
-#define ZONEID_PGOFF		((SECTIONS_PGOFF < ZONES_PGOFF)? \
-						SECTIONS_PGOFF : ZONES_PGOFF)
-#else
-#define ZONEID_SHIFT		(NODES_SHIFT + ZONES_SHIFT)
-#define ZONEID_PGOFF		((NODES_PGOFF < ZONES_PGOFF)? \
-						NODES_PGOFF : ZONES_PGOFF)
-#endif
-
-#define ZONEID_PGSHIFT		(ZONEID_PGOFF * (ZONEID_SHIFT != 0))
-
-#if SECTIONS_WIDTH+NODES_WIDTH+ZONES_WIDTH > BITS_PER_LONG - NR_PAGEFLAGS
-#error SECTIONS_WIDTH+NODES_WIDTH+ZONES_WIDTH > BITS_PER_LONG - NR_PAGEFLAGS
-#endif
-
-#define ZONES_MASK		((1UL << ZONES_WIDTH) - 1)
-#define NODES_MASK		((1UL << NODES_WIDTH) - 1)
-#define SECTIONS_MASK		((1UL << SECTIONS_WIDTH) - 1)
-#define ZONEID_MASK		((1UL << ZONEID_SHIFT) - 1)
-
-static inline enum zone_type page_zonenum(const struct page *page)
-{
-	return (page->flags >> ZONES_PGSHIFT) & ZONES_MASK;
-}
-
-/*
- * The identification function is only used by the buddy allocator for
- * determining if two pages could be buddies. We are not really
- * identifying a zone since we could be using a the section number
- * id if we have not node id available in page flags.
- * We guarantee only that it will return the same value for two
- * combinable pages in a zone.
- */
-static inline int page_zone_id(struct page *page)
-{
-	return (page->flags >> ZONEID_PGSHIFT) & ZONEID_MASK;
-}
-
-static inline int zone_to_nid(struct zone *zone)
-{
-#ifdef CONFIG_NUMA
-	return zone->node;
-#else
-	return 0;
-#endif
-}
-
-#ifdef NODE_NOT_IN_PAGE_FLAGS
-extern int page_to_nid(const struct page *page);
-#else
-static inline int page_to_nid(const struct page *page)
-{
-	return (page->flags >> NODES_PGSHIFT) & NODES_MASK;
-}
-#endif
-
-static inline struct zone *page_zone(const struct page *page)
-{
-	return &NODE_DATA(page_to_nid(page))->node_zones[page_zonenum(page)];
-}
-
-#if defined(CONFIG_SPARSEMEM) && !defined(CONFIG_SPARSEMEM_VMEMMAP)
-static inline void set_page_section(struct page *page, unsigned long section)
-{
-	page->flags &= ~(SECTIONS_MASK << SECTIONS_PGSHIFT);
-	page->flags |= (section & SECTIONS_MASK) << SECTIONS_PGSHIFT;
-}
-
-static inline unsigned long page_to_section(const struct page *page)
-{
-	return (page->flags >> SECTIONS_PGSHIFT) & SECTIONS_MASK;
-}
-#endif
-
-static inline void set_page_zone(struct page *page, enum zone_type zone)
-{
-	page->flags &= ~(ZONES_MASK << ZONES_PGSHIFT);
-	page->flags |= (zone & ZONES_MASK) << ZONES_PGSHIFT;
-}
-
-static inline void set_page_node(struct page *page, unsigned long node)
-{
-	page->flags &= ~(NODES_MASK << NODES_PGSHIFT);
-	page->flags |= (node & NODES_MASK) << NODES_PGSHIFT;
-}
-
-static inline void set_page_links(struct page *page, enum zone_type zone,
-	unsigned long node, unsigned long pfn)
-{
-	set_page_zone(page, zone);
-	set_page_node(page, node);
-#if defined(CONFIG_SPARSEMEM) && !defined(CONFIG_SPARSEMEM_VMEMMAP)
-	set_page_section(page, pfn_to_section_nr(pfn));
-#endif
-}
-
-/*
- * Some inline functions in vmstat.h depend on page_zone()
- */
-#include <linux/vmstat.h>
-
-static __always_inline void *lowmem_page_address(const struct page *page)
-{
-	return __va(PFN_PHYS(page_to_pfn(page)));
-}
-
-#if defined(CONFIG_HIGHMEM) && !defined(WANT_PAGE_VIRTUAL)
-#define HASHED_PAGE_VIRTUAL
-#endif
-
-#if defined(WANT_PAGE_VIRTUAL)
-#define page_address(page) ((page)->virtual)
-#define set_page_address(page, address)			\
-	do {						\
-		(page)->virtual = (address);		\
-	} while(0)
-#define page_address_init()  do { } while(0)
-#endif
-
-#if defined(HASHED_PAGE_VIRTUAL)
-void *page_address(const struct page *page);
-void set_page_address(struct page *page, void *virtual);
-void page_address_init(void);
-#endif
-
-#if !defined(HASHED_PAGE_VIRTUAL) && !defined(WANT_PAGE_VIRTUAL)
-#define page_address(page) lowmem_page_address(page)
-#define set_page_address(page, address)  do { } while(0)
-#define page_address_init()  do { } while(0)
-#endif
-
-/*
- * On an anonymous page mapped into a user virtual memory area,
- * page->mapping points to its anon_vma, not to a struct address_space;
- * with the PAGE_MAPPING_ANON bit set to distinguish it.  See rmap.h.
- *
- * On an anonymous page in a VM_MERGEABLE area, if CONFIG_KSM is enabled,
- * the PAGE_MAPPING_KSM bit may be set along with the PAGE_MAPPING_ANON bit;
- * and then page->mapping points, not to an anon_vma, but to a private
- * structure which KSM associates with that merged page.  See ksm.h.
- *
- * PAGE_MAPPING_KSM without PAGE_MAPPING_ANON is currently never used.
- *
- * Please note that, confusingly, "page_mapping" refers to the inode
- * address_space which maps the page from disk; whereas "page_mapped"
- * refers to user virtual address space into which the page is mapped.
- */
-#define PAGE_MAPPING_ANON	1
-#define PAGE_MAPPING_KSM	2
-#define PAGE_MAPPING_FLAGS	(PAGE_MAPPING_ANON | PAGE_MAPPING_KSM)
-
-extern struct address_space swapper_space;
-static inline struct address_space *page_mapping(struct page *page)
-{
-	struct address_space *mapping = page->mapping;
-
-	VM_BUG_ON(PageSlab(page));
-	if (unlikely(PageSwapCache(page)))
-		mapping = &swapper_space;
-	else if ((unsigned long)mapping & PAGE_MAPPING_ANON)
-		mapping = NULL;
-	return mapping;
-}
-
-/* Neutral page->mapping pointer to address_space or anon_vma or other */
-static inline void *page_rmapping(struct page *page)
-{
-	return (void *)((unsigned long)page->mapping & ~PAGE_MAPPING_FLAGS);
-}
-
-static inline int PageAnon(struct page *page)
-{
-	return ((unsigned long)page->mapping & PAGE_MAPPING_ANON) != 0;
-}
-
-/*
- * Return the pagecache index of the passed page.  Regular pagecache pages
- * use ->index whereas swapcache pages use ->private
- */
-static inline pgoff_t page_index(struct page *page)
-{
-	if (unlikely(PageSwapCache(page)))
-		return page_private(page);
-	return page->index;
-}
-
-/*
- * Return true if this page is mapped into pagetables.
- */
-static inline int page_mapped(struct page *page)
-{
-	return atomic_read(&(page)->_mapcount) >= 0;
-}
-
-/*
- * Different kinds of faults, as returned by handle_mm_fault().
- * Used to decide whether a process gets delivered SIGBUS or
- * just gets major/minor fault counters bumped up.
- */
-
-#define VM_FAULT_MINOR	0 /* For backwards compat. Remove me quickly. */
-
-#define VM_FAULT_OOM	0x0001
-#define VM_FAULT_SIGBUS	0x0002
-#define VM_FAULT_MAJOR	0x0004
-#define VM_FAULT_WRITE	0x0008	/* Special case for get_user_pages */
-#define VM_FAULT_HWPOISON 0x0010	/* Hit poisoned small page */
-#define VM_FAULT_HWPOISON_LARGE 0x0020  /* Hit poisoned large page. Index encoded in upper bits */
-
-#define VM_FAULT_NOPAGE	0x0100	/* ->fault installed the pte, not return page */
-#define VM_FAULT_LOCKED	0x0200	/* ->fault locked the returned page */
-#define VM_FAULT_RETRY	0x0400	/* ->fault blocked, must retry */
-
-#define VM_FAULT_HWPOISON_LARGE_MASK 0xf000 /* encodes hpage index for large hwpoison */
-
-#define VM_FAULT_ERROR	(VM_FAULT_OOM | VM_FAULT_SIGBUS | VM_FAULT_HWPOISON | \
-			 VM_FAULT_HWPOISON_LARGE)
-
-/* Encode hstate index for a hwpoisoned large page */
-#define VM_FAULT_SET_HINDEX(x) ((x) << 12)
-#define VM_FAULT_GET_HINDEX(x) (((x) >> 12) & 0xf)
-
-/*
- * Can be called by the pagefault handler when it gets a VM_FAULT_OOM.
- */
-extern void pagefault_out_of_memory(void);
-
-#define offset_in_page(p)	((unsigned long)(p) & ~PAGE_MASK)
-
-/*
- * Flags passed to show_mem() and show_free_areas() to suppress output in
- * various contexts.
- */
-#define SHOW_MEM_FILTER_NODES	(0x0001u)	/* filter disallowed nodes */
-
-extern void show_free_areas(unsigned int flags);
-extern bool skip_free_areas_node(unsigned int flags, int nid);
-
-int shmem_lock(struct file *file, int lock, struct user_struct *user);
-struct file *shmem_file_setup(const char *name, loff_t size, unsigned long flags);
-void shmem_set_file(struct vm_area_struct *vma, struct file *file);
-int shmem_zero_setup(struct vm_area_struct *);
-
-extern int can_do_mlock(void);
-extern int user_shm_lock(size_t, struct user_struct *);
-extern void user_shm_unlock(size_t, struct user_struct *);
-
-/*
- * Parameter block passed down to zap_pte_range in exceptional cases.
- */
-struct zap_details {
-	struct vm_area_struct *nonlinear_vma;	/* Check page->index if set */
-	struct address_space *check_mapping;	/* Check page->mapping if set */
-	pgoff_t	first_index;			/* Lowest page->index to unmap */
-	pgoff_t last_index;			/* Highest page->index to unmap */
-};
-
-struct page *vm_normal_page(struct vm_area_struct *vma, unsigned long addr,
-		pte_t pte);
-
-int zap_vma_ptes(struct vm_area_struct *vma, unsigned long address,
-		unsigned long size);
-void zap_page_range(struct vm_area_struct *vma, unsigned long address,
-		unsigned long size, struct zap_details *);
-void unmap_vmas(struct mmu_gather *tlb,
-		struct vm_area_struct *start_vma, unsigned long start_addr,
-		unsigned long end_addr, unsigned long *nr_accounted,
-		struct zap_details *);
-
-/**
- * mm_walk - callbacks for walk_page_range
- * @pgd_entry: if set, called for each non-empty PGD (top-level) entry
- * @pud_entry: if set, called for each non-empty PUD (2nd-level) entry
- * @pmd_entry: if set, called for each non-empty PMD (3rd-level) entry
- *	       this handler is required to be able to handle
- *	       pmd_trans_huge() pmds.  They may simply choose to
- *	       split_huge_page() instead of handling it explicitly.
- * @pte_entry: if set, called for each non-empty PTE (4th-level) entry
- * @pte_hole: if set, called for each hole at all levels
- * @hugetlb_entry: if set, called for each hugetlb entry
- *		   *Caution*: The caller must hold mmap_sem() if @hugetlb_entry
- * 			      is used.
- *
- * (see walk_page_range for more details)
- */
-struct mm_walk {
-	int (*pgd_entry)(pgd_t *, unsigned long, unsigned long, struct mm_walk *);
-	int (*pud_entry)(pud_t *, unsigned long, unsigned long, struct mm_walk *);
-	int (*pmd_entry)(pmd_t *, unsigned long, unsigned long, struct mm_walk *);
-	int (*pte_entry)(pte_t *, unsigned long, unsigned long, struct mm_walk *);
-	int (*pte_hole)(unsigned long, unsigned long, struct mm_walk *);
-	int (*hugetlb_entry)(pte_t *, unsigned long,
-			     unsigned long, unsigned long, struct mm_walk *);
-	struct mm_struct *mm;
-	void *private;
-};
-
-int walk_page_range(unsigned long addr, unsigned long end,
-		struct mm_walk *walk);
-void free_pgd_range(struct mmu_gather *tlb, unsigned long addr,
-		unsigned long end, unsigned long floor, unsigned long ceiling);
-int copy_page_range(struct mm_struct *dst, struct mm_struct *src,
-			struct vm_area_struct *vma);
-void unmap_mapping_range(struct address_space *mapping,
-		loff_t const holebegin, loff_t const holelen, int even_cows);
-int follow_pfn(struct vm_area_struct *vma, unsigned long address,
-	unsigned long *pfn);
-int follow_phys(struct vm_area_struct *vma, unsigned long address,
-		unsigned int flags, unsigned long *prot, resource_size_t *phys);
-int generic_access_phys(struct vm_area_struct *vma, unsigned long addr,
-			void *buf, int len, int write);
-
-static inline void unmap_shared_mapping_range(struct address_space *mapping,
-		loff_t const holebegin, loff_t const holelen)
-{
-	unmap_mapping_range(mapping, holebegin, holelen, 0);
-}
-
-extern void truncate_pagecache(struct inode *inode, loff_t old, loff_t new);
-extern void truncate_setsize(struct inode *inode, loff_t newsize);
-extern int vmtruncate(struct inode *inode, loff_t offset);
-extern int vmtruncate_range(struct inode *inode, loff_t offset, loff_t end);
-void truncate_pagecache_range(struct inode *inode, loff_t offset, loff_t end);
-int truncate_inode_page(struct address_space *mapping, struct page *page);
-int generic_error_remove_page(struct address_space *mapping, struct page *page);
-
-int invalidate_inode_page(struct page *page);
-
-#ifdef CONFIG_MMU
-extern int handle_mm_fault(struct mm_struct *mm, struct vm_area_struct *vma,
-			unsigned long address, unsigned int flags);
-extern int fixup_user_fault(struct task_struct *tsk, struct mm_struct *mm,
-			    unsigned long address, unsigned int fault_flags);
-#else
-static inline int handle_mm_fault(struct mm_struct *mm,
-			struct vm_area_struct *vma, unsigned long address,
-			unsigned int flags)
-{
-	/* should never happen if there's no MMU */
-	BUG();
-	return VM_FAULT_SIGBUS;
-}
-static inline int fixup_user_fault(struct task_struct *tsk,
-		struct mm_struct *mm, unsigned long address,
-		unsigned int fault_flags)
-{
-	/* should never happen if there's no MMU */
-	BUG();
-	return -EFAULT;
-}
-#endif
-
-extern int make_pages_present(unsigned long addr, unsigned long end);
-extern int access_process_vm(struct task_struct *tsk, unsigned long addr, void *buf, int len, int write);
-extern int access_remote_vm(struct mm_struct *mm, unsigned long addr,
-		void *buf, int len, int write);
-
-int __get_user_pages(struct task_struct *tsk, struct mm_struct *mm,
-		     unsigned long start, int len, unsigned int foll_flags,
-		     struct page **pages, struct vm_area_struct **vmas,
-		     int *nonblocking);
-int get_user_pages(struct task_struct *tsk, struct mm_struct *mm,
-			unsigned long start, int nr_pages, int write, int force,
-			struct page **pages, struct vm_area_struct **vmas);
-int get_user_pages_fast(unsigned long start, int nr_pages, int write,
-			struct page **pages);
-struct page *get_dump_page(unsigned long addr);
-
-extern int try_to_release_page(struct page * page, gfp_t gfp_mask);
-extern void do_invalidatepage(struct page *page, unsigned long offset);
-
-int __set_page_dirty_nobuffers(struct page *page);
-int __set_page_dirty_no_writeback(struct page *page);
-int redirty_page_for_writepage(struct writeback_control *wbc,
-				struct page *page);
-void account_page_dirtied(struct page *page, struct address_space *mapping);
-void account_page_writeback(struct page *page);
-int set_page_dirty(struct page *page);
-int set_page_dirty_lock(struct page *page);
-int clear_page_dirty_for_io(struct page *page);
-
-/* Is the vma a continuation of the stack vma above it? */
-static inline int vma_growsdown(struct vm_area_struct *vma, unsigned long addr)
-{
-	return vma && (vma->vm_end == addr) && (vma->vm_flags & VM_GROWSDOWN);
-}
-
-static inline int stack_guard_page_start(struct vm_area_struct *vma,
-					     unsigned long addr)
-{
-	return (vma->vm_flags & VM_GROWSDOWN) &&
-		(vma->vm_start == addr) &&
-		!vma_growsdown(vma->vm_prev, addr);
-}
-
-/* Is the vma a continuation of the stack vma below it? */
-static inline int vma_growsup(struct vm_area_struct *vma, unsigned long addr)
-{
-	return vma && (vma->vm_start == addr) && (vma->vm_flags & VM_GROWSUP);
-}
-
-static inline int stack_guard_page_end(struct vm_area_struct *vma,
-					   unsigned long addr)
-{
-	return (vma->vm_flags & VM_GROWSUP) &&
-		(vma->vm_end == addr) &&
-		!vma_growsup(vma->vm_next, addr);
-}
-
-extern pid_t
-vm_is_stack(struct task_struct *task, struct vm_area_struct *vma, int in_group);
-
-extern unsigned long move_page_tables(struct vm_area_struct *vma,
-		unsigned long old_addr, struct vm_area_struct *new_vma,
-		unsigned long new_addr, unsigned long len);
-extern unsigned long do_mremap(unsigned long addr,
-			       unsigned long old_len, unsigned long new_len,
-			       unsigned long flags, unsigned long new_addr);
-extern int mprotect_fixup(struct vm_area_struct *vma,
-			  struct vm_area_struct **pprev, unsigned long start,
-			  unsigned long end, unsigned long newflags);
-
-/*
- * doesn't attempt to fault and will return short.
- */
-int __get_user_pages_fast(unsigned long start, int nr_pages, int write,
-			  struct page **pages);
-/*
- * per-process(per-mm_struct) statistics.
- */
-static inline unsigned long get_mm_counter(struct mm_struct *mm, int member)
-{
-	long val = atomic_long_read(&mm->rss_stat.count[member]);
-
-#ifdef SPLIT_RSS_COUNTING
-	/*
-	 * counter is updated in asynchronous manner and may go to minus.
-	 * But it's never be expected number for users.
-	 */
-	if (val < 0)
-		val = 0;
-#endif
-	return (unsigned long)val;
-}
-
-static inline void add_mm_counter(struct mm_struct *mm, int member, long value)
-{
-	atomic_long_add(value, &mm->rss_stat.count[member]);
-}
-
-static inline void inc_mm_counter(struct mm_struct *mm, int member)
-{
-	atomic_long_inc(&mm->rss_stat.count[member]);
-}
-
-static inline void dec_mm_counter(struct mm_struct *mm, int member)
-{
-	atomic_long_dec(&mm->rss_stat.count[member]);
-}
-
-static inline unsigned long get_mm_rss(struct mm_struct *mm)
-{
-	return get_mm_counter(mm, MM_FILEPAGES) +
-		get_mm_counter(mm, MM_ANONPAGES);
-}
-
-static inline unsigned long get_mm_hiwater_rss(struct mm_struct *mm)
-{
-	return max(mm->hiwater_rss, get_mm_rss(mm));
-}
-
-static inline unsigned long get_mm_hiwater_vm(struct mm_struct *mm)
-{
-	return max(mm->hiwater_vm, mm->total_vm);
-}
-
-static inline void update_hiwater_rss(struct mm_struct *mm)
-{
-	unsigned long _rss = get_mm_rss(mm);
-
-	if ((mm)->hiwater_rss < _rss)
-		(mm)->hiwater_rss = _rss;
-}
-
-static inline void update_hiwater_vm(struct mm_struct *mm)
-{
-	if (mm->hiwater_vm < mm->total_vm)
-		mm->hiwater_vm = mm->total_vm;
-}
-
-static inline void setmax_mm_hiwater_rss(unsigned long *maxrss,
-					 struct mm_struct *mm)
-{
-	unsigned long hiwater_rss = get_mm_hiwater_rss(mm);
-
-	if (*maxrss < hiwater_rss)
-		*maxrss = hiwater_rss;
-}
-
-#if defined(SPLIT_RSS_COUNTING)
-void sync_mm_rss(struct mm_struct *mm);
-#else
-static inline void sync_mm_rss(struct mm_struct *mm)
-{
-}
-#endif
-
-int vma_wants_writenotify(struct vm_area_struct *vma);
-
-extern pte_t *__get_locked_pte(struct mm_struct *mm, unsigned long addr,
-			       spinlock_t **ptl);
-static inline pte_t *get_locked_pte(struct mm_struct *mm, unsigned long addr,
-				    spinlock_t **ptl)
-{
-	pte_t *ptep;
-	__cond_lock(*ptl, ptep = __get_locked_pte(mm, addr, ptl));
-	return ptep;
-}
-
-#ifdef __PAGETABLE_PUD_FOLDED
-static inline int __pud_alloc(struct mm_struct *mm, pgd_t *pgd,
-						unsigned long address)
-{
-	return 0;
-}
-#else
-int __pud_alloc(struct mm_struct *mm, pgd_t *pgd, unsigned long address);
-#endif
-
-#ifdef __PAGETABLE_PMD_FOLDED
-static inline int __pmd_alloc(struct mm_struct *mm, pud_t *pud,
-						unsigned long address)
-{
-	return 0;
-}
-#else
-int __pmd_alloc(struct mm_struct *mm, pud_t *pud, unsigned long address);
-#endif
-
-int __pte_alloc(struct mm_struct *mm, struct vm_area_struct *vma,
-		pmd_t *pmd, unsigned long address);
-int __pte_alloc_kernel(pmd_t *pmd, unsigned long address);
-
-/*
- * The following ifdef needed to get the 4level-fixup.h header to work.
- * Remove it when 4level-fixup.h has been removed.
- */
-#if defined(CONFIG_MMU) && !defined(__ARCH_HAS_4LEVEL_HACK)
-static inline pud_t *pud_alloc(struct mm_struct *mm, pgd_t *pgd, unsigned long address)
-{
-	return (unlikely(pgd_none(*pgd)) && __pud_alloc(mm, pgd, address))?
-		NULL: pud_offset(pgd, address);
-}
-
-static inline pmd_t *pmd_alloc(struct mm_struct *mm, pud_t *pud, unsigned long address)
-{
-	return (unlikely(pud_none(*pud)) && __pmd_alloc(mm, pud, address))?
-		NULL: pmd_offset(pud, address);
-}
-#endif /* CONFIG_MMU && !__ARCH_HAS_4LEVEL_HACK */
-
-#if USE_SPLIT_PTLOCKS
-/*
- * We tuck a spinlock to guard each pagetable page into its struct page,
- * at page->private, with BUILD_BUG_ON to make sure that this will not
- * overflow into the next struct page (as it might with DEBUG_SPINLOCK).
- * When freeing, reset page->mapping so free_pages_check won't complain.
- */
-#define __pte_lockptr(page)	&((page)->ptl)
-#define pte_lock_init(_page)	do {					\
-	spin_lock_init(__pte_lockptr(_page));				\
-} while (0)
-#define pte_lock_deinit(page)	((page)->mapping = NULL)
-#define pte_lockptr(mm, pmd)	({(void)(mm); __pte_lockptr(pmd_page(*(pmd)));})
-#else	/* !USE_SPLIT_PTLOCKS */
-/*
- * We use mm->page_table_lock to guard all pagetable pages of the mm.
- */
-#define pte_lock_init(page)	do {} while (0)
-#define pte_lock_deinit(page)	do {} while (0)
-#define pte_lockptr(mm, pmd)	({(void)(pmd); &(mm)->page_table_lock;})
-#endif /* USE_SPLIT_PTLOCKS */
-
-static inline void pgtable_page_ctor(struct page *page)
-{
-	pte_lock_init(page);
-	inc_zone_page_state(page, NR_PAGETABLE);
-}
-
-static inline void pgtable_page_dtor(struct page *page)
-{
-	pte_lock_deinit(page);
-	dec_zone_page_state(page, NR_PAGETABLE);
-}
-
-#define pte_offset_map_lock(mm, pmd, address, ptlp)	\
-({							\
-	spinlock_t *__ptl = pte_lockptr(mm, pmd);	\
-	pte_t *__pte = pte_offset_map(pmd, address);	\
-	*(ptlp) = __ptl;				\
-	spin_lock(__ptl);				\
-	__pte;						\
-})
-
-#define pte_unmap_unlock(pte, ptl)	do {		\
-	spin_unlock(ptl);				\
-	pte_unmap(pte);					\
-} while (0)
-
-#define pte_alloc_map(mm, vma, pmd, address)				\
-	((unlikely(pmd_none(*(pmd))) && __pte_alloc(mm, vma,	\
-							pmd, address))?	\
-	 NULL: pte_offset_map(pmd, address))
-
-#define pte_alloc_map_lock(mm, pmd, address, ptlp)	\
-	((unlikely(pmd_none(*(pmd))) && __pte_alloc(mm, NULL,	\
-							pmd, address))?	\
-		NULL: pte_offset_map_lock(mm, pmd, address, ptlp))
-
-#define pte_alloc_kernel(pmd, address)			\
-	((unlikely(pmd_none(*(pmd))) && __pte_alloc_kernel(pmd, address))? \
-		NULL: pte_offset_kernel(pmd, address))
-
-extern void free_area_init(unsigned long * zones_size);
-extern void free_area_init_node(int nid, unsigned long * zones_size,
-		unsigned long zone_start_pfn, unsigned long *zholes_size);
-extern void free_initmem(void);
-
-#ifdef CONFIG_HAVE_MEMBLOCK_NODE_MAP
-/*
- * With CONFIG_HAVE_MEMBLOCK_NODE_MAP set, an architecture may initialise its
- * zones, allocate the backing mem_map and account for memory holes in a more
- * architecture independent manner. This is a substitute for creating the
- * zone_sizes[] and zholes_size[] arrays and passing them to
- * free_area_init_node()
- *
- * An architecture is expected to register range of page frames backed by
- * physical memory with memblock_add[_node]() before calling
- * free_area_init_nodes() passing in the PFN each zone ends at. At a basic
- * usage, an architecture is expected to do something like
- *
- * unsigned long max_zone_pfns[MAX_NR_ZONES] = {max_dma, max_normal_pfn,
- * 							 max_highmem_pfn};
- * for_each_valid_physical_page_range()
- * 	memblock_add_node(base, size, nid)
- * free_area_init_nodes(max_zone_pfns);
- *
- * free_bootmem_with_active_regions() calls free_bootmem_node() for each
- * registered physical page range.  Similarly
- * sparse_memory_present_with_active_regions() calls memory_present() for
- * each range when SPARSEMEM is enabled.
- *
- * See mm/page_alloc.c for more information on each function exposed by
- * CONFIG_HAVE_MEMBLOCK_NODE_MAP.
- */
-extern void free_area_init_nodes(unsigned long *max_zone_pfn);
-unsigned long node_map_pfn_alignment(void);
-unsigned long __absent_pages_in_range(int nid, unsigned long start_pfn,
-						unsigned long end_pfn);
-extern unsigned long absent_pages_in_range(unsigned long start_pfn,
-						unsigned long end_pfn);
-extern void get_pfn_range_for_nid(unsigned int nid,
-			unsigned long *start_pfn, unsigned long *end_pfn);
-extern unsigned long find_min_pfn_with_active_regions(void);
-extern void free_bootmem_with_active_regions(int nid,
-						unsigned long max_low_pfn);
-extern void sparse_memory_present_with_active_regions(int nid);
-
-#endif /* CONFIG_HAVE_MEMBLOCK_NODE_MAP */
-
-#if !defined(CONFIG_HAVE_MEMBLOCK_NODE_MAP) && \
-    !defined(CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID)
-static inline int __early_pfn_to_nid(unsigned long pfn)
-{
-	return 0;
-}
-#else
-/* please see mm/page_alloc.c */
-extern int __meminit early_pfn_to_nid(unsigned long pfn);
-#ifdef CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID
-/* there is a per-arch backend function. */
-extern int __meminit __early_pfn_to_nid(unsigned long pfn);
-#endif /* CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID */
-#endif
-
-extern void set_dma_reserve(unsigned long new_dma_reserve);
-extern void memmap_init_zone(unsigned long, int, unsigned long,
-				unsigned long, enum memmap_context);
-extern void setup_per_zone_wmarks(void);
-extern int __meminit init_per_zone_wmark_min(void);
-extern void mem_init(void);
-extern void __init mmap_init(void);
-extern void show_mem(unsigned int flags);
-extern void si_meminfo(struct sysinfo * val);
-extern void si_meminfo_node(struct sysinfo *val, int nid);
-extern int after_bootmem;
-
-extern __printf(3, 4)
-void warn_alloc_failed(gfp_t gfp_mask, int order, const char *fmt, ...);
-
-extern void setup_per_cpu_pageset(void);
-
-extern void zone_pcp_update(struct zone *zone);
-
-/* nommu.c */
-extern atomic_long_t mmap_pages_allocated;
-extern int nommu_shrink_inode_mappings(struct inode *, size_t, size_t);
-
-/* prio_tree.c */
-void vma_prio_tree_add(struct vm_area_struct *, struct vm_area_struct *old);
-void vma_prio_tree_insert(struct vm_area_struct *, struct prio_tree_root *);
-void vma_prio_tree_remove(struct vm_area_struct *, struct prio_tree_root *);
-struct vm_area_struct *vma_prio_tree_next(struct vm_area_struct *vma,
-	struct prio_tree_iter *iter);
-
-#define vma_prio_tree_foreach(vma, iter, root, begin, end)	\
-	for (prio_tree_iter_init(iter, root, begin, end), vma = NULL;	\
-		(vma = vma_prio_tree_next(vma, iter)); )
-
-static inline void vma_nonlinear_insert(struct vm_area_struct *vma,
-					struct list_head *list)
-{
-	vma->shared.vm_set.parent = NULL;
-	list_add_tail(&vma->shared.vm_set.list, list);
-}
-
-/* mmap.c */
-extern int __vm_enough_memory(struct mm_struct *mm, long pages, int cap_sys_admin);
-extern int vma_adjust(struct vm_area_struct *vma, unsigned long start,
-	unsigned long end, pgoff_t pgoff, struct vm_area_struct *insert);
-extern struct vm_area_struct *vma_merge(struct mm_struct *,
-	struct vm_area_struct *prev, unsigned long addr, unsigned long end,
-	unsigned long vm_flags, struct anon_vma *, struct file *, pgoff_t,
-	struct mempolicy *);
-extern struct anon_vma *find_mergeable_anon_vma(struct vm_area_struct *);
-extern int split_vma(struct mm_struct *,
-	struct vm_area_struct *, unsigned long addr, int new_below);
-extern int insert_vm_struct(struct mm_struct *, struct vm_area_struct *);
-extern void __vma_link_rb(struct mm_struct *, struct vm_area_struct *,
-	struct rb_node **, struct rb_node *);
-extern void unlink_file_vma(struct vm_area_struct *);
-extern struct vm_area_struct *copy_vma(struct vm_area_struct **,
-	unsigned long addr, unsigned long len, pgoff_t pgoff);
-extern void exit_mmap(struct mm_struct *);
-
-extern int mm_take_all_locks(struct mm_struct *mm);
-extern void mm_drop_all_locks(struct mm_struct *mm);
-
-/* From fs/proc/base.c. callers must _not_ hold the mm's exe_file_lock */
-extern void added_exe_file_vma(struct mm_struct *mm);
-extern void removed_exe_file_vma(struct mm_struct *mm);
-extern void set_mm_exe_file(struct mm_struct *mm, struct file *new_exe_file);
-extern struct file *get_mm_exe_file(struct mm_struct *mm);
-
-extern int may_expand_vm(struct mm_struct *mm, unsigned long npages);
-extern int install_special_mapping(struct mm_struct *mm,
-				   unsigned long addr, unsigned long len,
-				   unsigned long flags, struct page **pages);
-
-extern unsigned long get_unmapped_area(struct file *, unsigned long, unsigned long, unsigned long, unsigned long);
-
-extern unsigned long mmap_region(struct file *file, unsigned long addr,
-	unsigned long len, unsigned long flags,
-	vm_flags_t vm_flags, unsigned long pgoff);
-extern unsigned long do_mmap(struct file *, unsigned long,
-        unsigned long, unsigned long,
-        unsigned long, unsigned long);
-extern int do_munmap(struct mm_struct *, unsigned long, size_t);
-
-/* These take the mm semaphore themselves */
-extern unsigned long vm_brk(unsigned long, unsigned long);
-extern int vm_munmap(unsigned long, size_t);
-extern unsigned long vm_mmap(struct file *, unsigned long,
-        unsigned long, unsigned long,
-        unsigned long, unsigned long);
-
-/* truncate.c */
-extern void truncate_inode_pages(struct address_space *, loff_t);
-extern void truncate_inode_pages_range(struct address_space *,
-				       loff_t lstart, loff_t lend);
-
-/* generic vm_area_ops exported for stackable file systems */
-extern int filemap_fault(struct vm_area_struct *, struct vm_fault *);
-
-/* mm/page-writeback.c */
-int write_one_page(struct page *page, int wait);
-void task_dirty_inc(struct task_struct *tsk);
-
-/* readahead.c */
-#define VM_MAX_READAHEAD	128	/* kbytes */
-#define VM_MIN_READAHEAD	16	/* kbytes (includes current page) */
-
-int force_page_cache_readahead(struct address_space *mapping, struct file *filp,
-			pgoff_t offset, unsigned long nr_to_read);
-
-void page_cache_sync_readahead(struct address_space *mapping,
-			       struct file_ra_state *ra,
-			       struct file *filp,
-			       pgoff_t offset,
-			       unsigned long size);
-
-void page_cache_async_readahead(struct address_space *mapping,
-				struct file_ra_state *ra,
-				struct file *filp,
-				struct page *pg,
-				pgoff_t offset,
-				unsigned long size);
-
-unsigned long max_sane_readahead(unsigned long nr);
-unsigned long ra_submit(struct file_ra_state *ra,
-			struct address_space *mapping,
-			struct file *filp);
-
-/* Generic expand stack which grows the stack according to GROWS{UP,DOWN} */
-extern int expand_stack(struct vm_area_struct *vma, unsigned long address);
-
-/* CONFIG_STACK_GROWSUP still needs to to grow downwards at some places */
-extern int expand_downwards(struct vm_area_struct *vma,
-		unsigned long address);
-#if VM_GROWSUP
-extern int expand_upwards(struct vm_area_struct *vma, unsigned long address);
-#else
-  #define expand_upwards(vma, address) do { } while (0)
-#endif
-
-/* Look up the first VMA which satisfies  addr < vm_end,  NULL if none. */
-extern struct vm_area_struct * find_vma(struct mm_struct * mm, unsigned long addr);
-extern struct vm_area_struct * find_vma_prev(struct mm_struct * mm, unsigned long addr,
-					     struct vm_area_struct **pprev);
-
-/* Look up the first VMA which intersects the interval start_addr..end_addr-1,
-   NULL if none.  Assume start_addr < end_addr. */
-static inline struct vm_area_struct * find_vma_intersection(struct mm_struct * mm, unsigned long start_addr, unsigned long end_addr)
-{
-	struct vm_area_struct * vma = find_vma(mm,start_addr);
-
-	if (vma && end_addr <= vma->vm_start)
-		vma = NULL;
-	return vma;
-}
-
-static inline unsigned long vma_pages(struct vm_area_struct *vma)
-{
-	return (vma->vm_end - vma->vm_start) >> PAGE_SHIFT;
-}
-
-/* Look up the first VMA which exactly match the interval vm_start ... vm_end */
-static inline struct vm_area_struct *find_exact_vma(struct mm_struct *mm,
-				unsigned long vm_start, unsigned long vm_end)
-{
-	struct vm_area_struct *vma = find_vma(mm, vm_start);
-
-	if (vma && (vma->vm_start != vm_start || vma->vm_end != vm_end))
-		vma = NULL;
-
-	return vma;
-}
-
-#ifdef CONFIG_MMU
-pgprot_t vm_get_page_prot(unsigned long vm_flags);
-#else
-static inline pgprot_t vm_get_page_prot(unsigned long vm_flags)
-{
-	return __pgprot(0);
-}
-#endif
-
-struct vm_area_struct *find_extend_vma(struct mm_struct *, unsigned long addr);
-int remap_pfn_range(struct vm_area_struct *, unsigned long addr,
-			unsigned long pfn, unsigned long size, pgprot_t);
-int vm_insert_page(struct vm_area_struct *, unsigned long addr, struct page *);
-int vm_insert_pfn(struct vm_area_struct *vma, unsigned long addr,
-			unsigned long pfn);
-int vm_insert_mixed(struct vm_area_struct *vma, unsigned long addr,
-			unsigned long pfn);
-
-struct page *follow_page(struct vm_area_struct *, unsigned long address,
-			unsigned int foll_flags);
-#define FOLL_WRITE	0x01	/* check pte is writable */
-#define FOLL_TOUCH	0x02	/* mark page accessed */
-#define FOLL_GET	0x04	/* do get_page on page */
-#define FOLL_DUMP	0x08	/* give error on hole if it would be zero */
-#define FOLL_FORCE	0x10	/* get_user_pages read/write w/o permission */
-#define FOLL_NOWAIT	0x20	/* if a disk transfer is needed, start the IO
-				 * and return without waiting upon it */
-#define FOLL_MLOCK	0x40	/* mark page as mlocked */
-#define FOLL_SPLIT	0x80	/* don't return transhuge pages, split them */
-#define FOLL_HWPOISON	0x100	/* check page is hwpoisoned */
-
-typedef int (*pte_fn_t)(pte_t *pte, pgtable_t token, unsigned long addr,
-			void *data);
-extern int apply_to_page_range(struct mm_struct *mm, unsigned long address,
-			       unsigned long size, pte_fn_t fn, void *data);
-
-#ifdef CONFIG_PROC_FS
-void vm_stat_account(struct mm_struct *, unsigned long, struct file *, long);
-#else
-static inline void vm_stat_account(struct mm_struct *mm,
-			unsigned long flags, struct file *file, long pages)
-{
-}
-#endif /* CONFIG_PROC_FS */
-
-#ifdef CONFIG_DEBUG_PAGEALLOC
-extern void kernel_map_pages(struct page *page, int numpages, int enable);
-#ifdef CONFIG_HIBERNATION
-extern bool kernel_page_present(struct page *page);
-#endif /* CONFIG_HIBERNATION */
-#else
-static inline void
-kernel_map_pages(struct page *page, int numpages, int enable) {}
-#ifdef CONFIG_HIBERNATION
-static inline bool kernel_page_present(struct page *page) { return true; }
-#endif /* CONFIG_HIBERNATION */
-#endif
-
-extern struct vm_area_struct *get_gate_vma(struct mm_struct *mm);
-#ifdef	__HAVE_ARCH_GATE_AREA
-int in_gate_area_no_mm(unsigned long addr);
-int in_gate_area(struct mm_struct *mm, unsigned long addr);
-#else
-int in_gate_area_no_mm(unsigned long addr);
-#define in_gate_area(mm, addr) ({(void)mm; in_gate_area_no_mm(addr);})
-#endif	/* __HAVE_ARCH_GATE_AREA */
-
-int drop_caches_sysctl_handler(struct ctl_table *, int,
-					void __user *, size_t *, loff_t *);
-unsigned long shrink_slab(struct shrink_control *shrink,
-			  unsigned long nr_pages_scanned,
-			  unsigned long lru_pages);
-
-#ifndef CONFIG_MMU
-#define randomize_va_space 0
-#else
-extern int randomize_va_space;
-#endif
-
-const char * arch_vma_name(struct vm_area_struct *vma);
-void print_vma_addr(char *prefix, unsigned long rip);
-
-void sparse_mem_maps_populate_node(struct page **map_map,
-				   unsigned long pnum_begin,
-				   unsigned long pnum_end,
-				   unsigned long map_count,
-				   int nodeid);
-
-struct page *sparse_mem_map_populate(unsigned long pnum, int nid);
-pgd_t *vmemmap_pgd_populate(unsigned long addr, int node);
-pud_t *vmemmap_pud_populate(pgd_t *pgd, unsigned long addr, int node);
-pmd_t *vmemmap_pmd_populate(pud_t *pud, unsigned long addr, int node);
-pte_t *vmemmap_pte_populate(pmd_t *pmd, unsigned long addr, int node);
-void *vmemmap_alloc_block(unsigned long size, int node);
-void *vmemmap_alloc_block_buf(unsigned long size, int node);
-void vmemmap_verify(pte_t *, int, unsigned long, unsigned long);
-int vmemmap_populate_basepages(struct page *start_page,
-						unsigned long pages, int node);
-int vmemmap_populate(struct page *start_page, unsigned long pages, int node);
-void vmemmap_populate_print_last(void);
-
-
-enum mf_flags {
-	MF_COUNT_INCREASED = 1 << 0,
-	MF_ACTION_REQUIRED = 1 << 1,
-};
-extern int memory_failure(unsigned long pfn, int trapno, int flags);
-extern void memory_failure_queue(unsigned long pfn, int trapno, int flags);
-extern int unpoison_memory(unsigned long pfn);
-extern int sysctl_memory_failure_early_kill;
-extern int sysctl_memory_failure_recovery;
-extern void shake_page(struct page *p, int access);
-extern atomic_long_t mce_bad_pages;
-extern int soft_offline_page(struct page *page, int flags);
-
-extern void dump_page(struct page *page);
-
-#if defined(CONFIG_TRANSPARENT_HUGEPAGE) || defined(CONFIG_HUGETLBFS)
-extern void clear_huge_page(struct page *page,
-			    unsigned long addr,
-			    unsigned int pages_per_huge_page);
-extern void copy_user_huge_page(struct page *dst, struct page *src,
-				unsigned long addr, struct vm_area_struct *vma,
-				unsigned int pages_per_huge_page);
-#endif /* CONFIG_TRANSPARENT_HUGEPAGE || CONFIG_HUGETLBFS */
-
-#ifdef CONFIG_DEBUG_PAGEALLOC
-extern unsigned int _debug_guardpage_minorder;
-
-static inline unsigned int debug_guardpage_minorder(void)
-{
-	return _debug_guardpage_minorder;
-}
-
-static inline bool page_is_guard(struct page *page)
-{
-	return test_bit(PAGE_DEBUG_FLAG_GUARD, &page->debug_flags);
-}
-#else
-static inline unsigned int debug_guardpage_minorder(void) { return 0; }
-static inline bool page_is_guard(struct page *page) { return false; }
-#endif /* CONFIG_DEBUG_PAGEALLOC */
-
-#endif /* __KERNEL__ */
-#endif /* _LINUX_MM_H */
diff --git a/ANDROID_3.4.5/include/linux/mm_inline.h b/ANDROID_3.4.5/include/linux/mm_inline.h
deleted file mode 100644
index 227fd3e9..00000000
--- a/ANDROID_3.4.5/include/linux/mm_inline.h
+++ /dev/null
@@ -1,102 +0,0 @@
-#ifndef LINUX_MM_INLINE_H
-#define LINUX_MM_INLINE_H
-
-#include <linux/huge_mm.h>
-
-/**
- * page_is_file_cache - should the page be on a file LRU or anon LRU?
- * @page: the page to test
- *
- * Returns 1 if @page is page cache page backed by a regular filesystem,
- * or 0 if @page is anonymous, tmpfs or otherwise ram or swap backed.
- * Used by functions that manipulate the LRU lists, to sort a page
- * onto the right LRU list.
- *
- * We would like to get this info without a page flag, but the state
- * needs to survive until the page is last deleted from the LRU, which
- * could be as far down as __page_cache_release.
- */
-static inline int page_is_file_cache(struct page *page)
-{
-	return !PageSwapBacked(page);
-}
-
-static inline void
-add_page_to_lru_list(struct zone *zone, struct page *page, enum lru_list lru)
-{
-	struct lruvec *lruvec;
-
-	lruvec = mem_cgroup_lru_add_list(zone, page, lru);
-	list_add(&page->lru, &lruvec->lists[lru]);
-	__mod_zone_page_state(zone, NR_LRU_BASE + lru, hpage_nr_pages(page));
-}
-
-static inline void
-del_page_from_lru_list(struct zone *zone, struct page *page, enum lru_list lru)
-{
-	mem_cgroup_lru_del_list(page, lru);
-	list_del(&page->lru);
-	__mod_zone_page_state(zone, NR_LRU_BASE + lru, -hpage_nr_pages(page));
-}
-
-/**
- * page_lru_base_type - which LRU list type should a page be on?
- * @page: the page to test
- *
- * Used for LRU list index arithmetic.
- *
- * Returns the base LRU type - file or anon - @page should be on.
- */
-static inline enum lru_list page_lru_base_type(struct page *page)
-{
-	if (page_is_file_cache(page))
-		return LRU_INACTIVE_FILE;
-	return LRU_INACTIVE_ANON;
-}
-
-/**
- * page_off_lru - which LRU list was page on? clearing its lru flags.
- * @page: the page to test
- *
- * Returns the LRU list a page was on, as an index into the array of LRU
- * lists; and clears its Unevictable or Active flags, ready for freeing.
- */
-static inline enum lru_list page_off_lru(struct page *page)
-{
-	enum lru_list lru;
-
-	if (PageUnevictable(page)) {
-		__ClearPageUnevictable(page);
-		lru = LRU_UNEVICTABLE;
-	} else {
-		lru = page_lru_base_type(page);
-		if (PageActive(page)) {
-			__ClearPageActive(page);
-			lru += LRU_ACTIVE;
-		}
-	}
-	return lru;
-}
-
-/**
- * page_lru - which LRU list should a page be on?
- * @page: the page to test
- *
- * Returns the LRU list a page should be on, as an index
- * into the array of LRU lists.
- */
-static inline enum lru_list page_lru(struct page *page)
-{
-	enum lru_list lru;
-
-	if (PageUnevictable(page))
-		lru = LRU_UNEVICTABLE;
-	else {
-		lru = page_lru_base_type(page);
-		if (PageActive(page))
-			lru += LRU_ACTIVE;
-	}
-	return lru;
-}
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/mm_types.h b/ANDROID_3.4.5/include/linux/mm_types.h
deleted file mode 100644
index b35752fb..00000000
--- a/ANDROID_3.4.5/include/linux/mm_types.h
+++ /dev/null
@@ -1,416 +0,0 @@
-#ifndef _LINUX_MM_TYPES_H
-#define _LINUX_MM_TYPES_H
-
-#include <linux/auxvec.h>
-#include <linux/types.h>
-#include <linux/threads.h>
-#include <linux/list.h>
-#include <linux/spinlock.h>
-#include <linux/prio_tree.h>
-#include <linux/rbtree.h>
-#include <linux/rwsem.h>
-#include <linux/completion.h>
-#include <linux/cpumask.h>
-#include <linux/page-debug-flags.h>
-#include <asm/page.h>
-#include <asm/mmu.h>
-
-#ifndef AT_VECTOR_SIZE_ARCH
-#define AT_VECTOR_SIZE_ARCH 0
-#endif
-#define AT_VECTOR_SIZE (2*(AT_VECTOR_SIZE_ARCH + AT_VECTOR_SIZE_BASE + 1))
-
-struct address_space;
-
-#define USE_SPLIT_PTLOCKS	(NR_CPUS >= CONFIG_SPLIT_PTLOCK_CPUS)
-
-/*
- * Each physical page in the system has a struct page associated with
- * it to keep track of whatever it is we are using the page for at the
- * moment. Note that we have no way to track which tasks are using
- * a page, though if it is a pagecache page, rmap structures can tell us
- * who is mapping it.
- *
- * The objects in struct page are organized in double word blocks in
- * order to allows us to use atomic double word operations on portions
- * of struct page. That is currently only used by slub but the arrangement
- * allows the use of atomic double word operations on the flags/mapping
- * and lru list pointers also.
- */
-struct page {
-	/* First double word block */
-	unsigned long flags;		/* Atomic flags, some possibly
-					 * updated asynchronously */
-	struct address_space *mapping;	/* If low bit clear, points to
-					 * inode address_space, or NULL.
-					 * If page mapped as anonymous
-					 * memory, low bit is set, and
-					 * it points to anon_vma object:
-					 * see PAGE_MAPPING_ANON below.
-					 */
-	/* Second double word */
-	struct {
-		union {
-			pgoff_t index;		/* Our offset within mapping. */
-			void *freelist;		/* slub first free object */
-		};
-
-		union {
-#if defined(CONFIG_HAVE_CMPXCHG_DOUBLE) && \
-	defined(CONFIG_HAVE_ALIGNED_STRUCT_PAGE)
-			/* Used for cmpxchg_double in slub */
-			unsigned long counters;
-#else
-			/*
-			 * Keep _count separate from slub cmpxchg_double data.
-			 * As the rest of the double word is protected by
-			 * slab_lock but _count is not.
-			 */
-			unsigned counters;
-#endif
-
-			struct {
-
-				union {
-					/*
-					 * Count of ptes mapped in
-					 * mms, to show when page is
-					 * mapped & limit reverse map
-					 * searches.
-					 *
-					 * Used also for tail pages
-					 * refcounting instead of
-					 * _count. Tail pages cannot
-					 * be mapped and keeping the
-					 * tail page _count zero at
-					 * all times guarantees
-					 * get_page_unless_zero() will
-					 * never succeed on tail
-					 * pages.
-					 */
-					atomic_t _mapcount;
-
-					struct {
-						unsigned inuse:16;
-						unsigned objects:15;
-						unsigned frozen:1;
-					};
-				};
-				atomic_t _count;		/* Usage count, see below. */
-			};
-		};
-	};
-
-	/* Third double word block */
-	union {
-		struct list_head lru;	/* Pageout list, eg. active_list
-					 * protected by zone->lru_lock !
-					 */
-		struct {		/* slub per cpu partial pages */
-			struct page *next;	/* Next partial slab */
-#ifdef CONFIG_64BIT
-			int pages;	/* Nr of partial slabs left */
-			int pobjects;	/* Approximate # of objects */
-#else
-			short int pages;
-			short int pobjects;
-#endif
-		};
-	};
-
-	/* Remainder is not double word aligned */
-	union {
-		unsigned long private;		/* Mapping-private opaque data:
-					 	 * usually used for buffer_heads
-						 * if PagePrivate set; used for
-						 * swp_entry_t if PageSwapCache;
-						 * indicates order in the buddy
-						 * system if PG_buddy is set.
-						 */
-#if USE_SPLIT_PTLOCKS
-		spinlock_t ptl;
-#endif
-		struct kmem_cache *slab;	/* SLUB: Pointer to slab */
-		struct page *first_page;	/* Compound tail pages */
-	};
-
-	/*
-	 * On machines where all RAM is mapped into kernel address space,
-	 * we can simply calculate the virtual address. On machines with
-	 * highmem some memory is mapped into kernel virtual memory
-	 * dynamically, so we need a place to store that address.
-	 * Note that this field could be 16 bits on x86 ... ;)
-	 *
-	 * Architectures with slow multiplication can define
-	 * WANT_PAGE_VIRTUAL in asm/page.h
-	 */
-#if defined(WANT_PAGE_VIRTUAL)
-	void *virtual;			/* Kernel virtual address (NULL if
-					   not kmapped, ie. highmem) */
-#endif /* WANT_PAGE_VIRTUAL */
-#ifdef CONFIG_WANT_PAGE_DEBUG_FLAGS
-	unsigned long debug_flags;	/* Use atomic bitops on this */
-#endif
-
-#ifdef CONFIG_KMEMCHECK
-	/*
-	 * kmemcheck wants to track the status of each byte in a page; this
-	 * is a pointer to such a status block. NULL if not tracked.
-	 */
-	void *shadow;
-#endif
-}
-/*
- * The struct page can be forced to be double word aligned so that atomic ops
- * on double words work. The SLUB allocator can make use of such a feature.
- */
-#ifdef CONFIG_HAVE_ALIGNED_STRUCT_PAGE
-	__aligned(2 * sizeof(unsigned long))
-#endif
-;
-
-struct page_frag {
-	struct page *page;
-#if (BITS_PER_LONG > 32) || (PAGE_SIZE >= 65536)
-	__u32 offset;
-	__u32 size;
-#else
-	__u16 offset;
-	__u16 size;
-#endif
-};
-
-typedef unsigned long __nocast vm_flags_t;
-
-/*
- * A region containing a mapping of a non-memory backed file under NOMMU
- * conditions.  These are held in a global tree and are pinned by the VMAs that
- * map parts of them.
- */
-struct vm_region {
-	struct rb_node	vm_rb;		/* link in global region tree */
-	vm_flags_t	vm_flags;	/* VMA vm_flags */
-	unsigned long	vm_start;	/* start address of region */
-	unsigned long	vm_end;		/* region initialised to here */
-	unsigned long	vm_top;		/* region allocated to here */
-	unsigned long	vm_pgoff;	/* the offset in vm_file corresponding to vm_start */
-	struct file	*vm_file;	/* the backing file or NULL */
-
-	int		vm_usage;	/* region usage count (access under nommu_region_sem) */
-	bool		vm_icache_flushed : 1; /* true if the icache has been flushed for
-						* this region */
-};
-
-/*
- * This struct defines a memory VMM memory area. There is one of these
- * per VM-area/task.  A VM area is any part of the process virtual memory
- * space that has a special rule for the page-fault handlers (ie a shared
- * library, the executable area etc).
- */
-struct vm_area_struct {
-	struct mm_struct * vm_mm;	/* The address space we belong to. */
-	unsigned long vm_start;		/* Our start address within vm_mm. */
-	unsigned long vm_end;		/* The first byte after our end address
-					   within vm_mm. */
-
-	/* linked list of VM areas per task, sorted by address */
-	struct vm_area_struct *vm_next, *vm_prev;
-
-	pgprot_t vm_page_prot;		/* Access permissions of this VMA. */
-	unsigned long vm_flags;		/* Flags, see mm.h. */
-
-	struct rb_node vm_rb;
-
-	/*
-	 * For areas with an address space and backing store,
-	 * linkage into the address_space->i_mmap prio tree, or
-	 * linkage to the list of like vmas hanging off its node, or
-	 * linkage of vma in the address_space->i_mmap_nonlinear list.
-	 */
-	union {
-		struct {
-			struct list_head list;
-			void *parent;	/* aligns with prio_tree_node parent */
-			struct vm_area_struct *head;
-		} vm_set;
-
-		struct raw_prio_tree_node prio_tree_node;
-	} shared;
-
-	/*
-	 * A file's MAP_PRIVATE vma can be in both i_mmap tree and anon_vma
-	 * list, after a COW of one of the file pages.	A MAP_SHARED vma
-	 * can only be in the i_mmap tree.  An anonymous MAP_PRIVATE, stack
-	 * or brk vma (with NULL file) can only be in an anon_vma list.
-	 */
-	struct list_head anon_vma_chain; /* Serialized by mmap_sem &
-					  * page_table_lock */
-	struct anon_vma *anon_vma;	/* Serialized by page_table_lock */
-
-	/* Function pointers to deal with this struct. */
-	const struct vm_operations_struct *vm_ops;
-
-	/* Information about our backing store: */
-	unsigned long vm_pgoff;		/* Offset (within vm_file) in PAGE_SIZE
-					   units, *not* PAGE_CACHE_SIZE */
-	struct file * vm_file;		/* File we map to (can be NULL). */
-	void * vm_private_data;		/* was vm_pte (shared mem) */
-
-#ifndef CONFIG_MMU
-	struct vm_region *vm_region;	/* NOMMU mapping region */
-#endif
-#ifdef CONFIG_NUMA
-	struct mempolicy *vm_policy;	/* NUMA policy for the VMA */
-#endif
-};
-
-struct core_thread {
-	struct task_struct *task;
-	struct core_thread *next;
-};
-
-struct core_state {
-	atomic_t nr_threads;
-	struct core_thread dumper;
-	struct completion startup;
-};
-
-enum {
-	MM_FILEPAGES,
-	MM_ANONPAGES,
-	MM_SWAPENTS,
-	NR_MM_COUNTERS
-};
-
-#if USE_SPLIT_PTLOCKS && defined(CONFIG_MMU)
-#define SPLIT_RSS_COUNTING
-/* per-thread cached information, */
-struct task_rss_stat {
-	int events;	/* for synchronization threshold */
-	int count[NR_MM_COUNTERS];
-};
-#endif /* USE_SPLIT_PTLOCKS */
-
-struct mm_rss_stat {
-	atomic_long_t count[NR_MM_COUNTERS];
-};
-
-struct mm_struct {
-	struct vm_area_struct * mmap;		/* list of VMAs */
-	struct rb_root mm_rb;
-	struct vm_area_struct * mmap_cache;	/* last find_vma result */
-#ifdef CONFIG_MMU
-	unsigned long (*get_unmapped_area) (struct file *filp,
-				unsigned long addr, unsigned long len,
-				unsigned long pgoff, unsigned long flags);
-	void (*unmap_area) (struct mm_struct *mm, unsigned long addr);
-#endif
-	unsigned long mmap_base;		/* base of mmap area */
-	unsigned long task_size;		/* size of task vm space */
-	unsigned long cached_hole_size; 	/* if non-zero, the largest hole below free_area_cache */
-	unsigned long free_area_cache;		/* first hole of size cached_hole_size or larger */
-	pgd_t * pgd;
-	atomic_t mm_users;			/* How many users with user space? */
-	atomic_t mm_count;			/* How many references to "struct mm_struct" (users count as 1) */
-	int map_count;				/* number of VMAs */
-
-	spinlock_t page_table_lock;		/* Protects page tables and some counters */
-	struct rw_semaphore mmap_sem;
-
-	struct list_head mmlist;		/* List of maybe swapped mm's.	These are globally strung
-						 * together off init_mm.mmlist, and are protected
-						 * by mmlist_lock
-						 */
-
-
-	unsigned long hiwater_rss;	/* High-watermark of RSS usage */
-	unsigned long hiwater_vm;	/* High-water virtual memory usage */
-
-	unsigned long total_vm;		/* Total pages mapped */
-	unsigned long locked_vm;	/* Pages that have PG_mlocked set */
-	unsigned long pinned_vm;	/* Refcount permanently increased */
-	unsigned long shared_vm;	/* Shared pages (files) */
-	unsigned long exec_vm;		/* VM_EXEC & ~VM_WRITE */
-	unsigned long stack_vm;		/* VM_GROWSUP/DOWN */
-	unsigned long reserved_vm;	/* VM_RESERVED|VM_IO pages */
-	unsigned long def_flags;
-	unsigned long nr_ptes;		/* Page table pages */
-	unsigned long start_code, end_code, start_data, end_data;
-	unsigned long start_brk, brk, start_stack;
-	unsigned long arg_start, arg_end, env_start, env_end;
-
-	unsigned long saved_auxv[AT_VECTOR_SIZE]; /* for /proc/PID/auxv */
-
-	/*
-	 * Special counters, in some configurations protected by the
-	 * page_table_lock, in other configurations by being atomic.
-	 */
-	struct mm_rss_stat rss_stat;
-
-	struct linux_binfmt *binfmt;
-
-	cpumask_var_t cpu_vm_mask_var;
-
-	/* Architecture-specific MM context */
-	mm_context_t context;
-
-	/* Swap token stuff */
-	/*
-	 * Last value of global fault stamp as seen by this process.
-	 * In other words, this value gives an indication of how long
-	 * it has been since this task got the token.
-	 * Look at mm/thrash.c
-	 */
-	unsigned int faultstamp;
-	unsigned int token_priority;
-	unsigned int last_interval;
-
-	unsigned long flags; /* Must use atomic bitops to access the bits */
-
-	struct core_state *core_state; /* coredumping support */
-#ifdef CONFIG_AIO
-	spinlock_t		ioctx_lock;
-	struct hlist_head	ioctx_list;
-#endif
-#ifdef CONFIG_MM_OWNER
-	/*
-	 * "owner" points to a task that is regarded as the canonical
-	 * user/owner of this mm. All of the following must be true in
-	 * order for it to be changed:
-	 *
-	 * current == mm->owner
-	 * current->mm != mm
-	 * new_owner->mm == mm
-	 * new_owner->alloc_lock is held
-	 */
-	struct task_struct __rcu *owner;
-#endif
-
-	/* store ref to file /proc/<pid>/exe symlink points to */
-	struct file *exe_file;
-	unsigned long num_exe_file_vmas;
-#ifdef CONFIG_MMU_NOTIFIER
-	struct mmu_notifier_mm *mmu_notifier_mm;
-#endif
-#ifdef CONFIG_TRANSPARENT_HUGEPAGE
-	pgtable_t pmd_huge_pte; /* protected by page_table_lock */
-#endif
-#ifdef CONFIG_CPUMASK_OFFSTACK
-	struct cpumask cpumask_allocation;
-#endif
-};
-
-static inline void mm_init_cpumask(struct mm_struct *mm)
-{
-#ifdef CONFIG_CPUMASK_OFFSTACK
-	mm->cpu_vm_mask_var = &mm->cpumask_allocation;
-#endif
-}
-
-/* Future-safe accessor for struct mm_struct's cpu_vm_mask. */
-static inline cpumask_t *mm_cpumask(struct mm_struct *mm)
-{
-	return mm->cpu_vm_mask_var;
-}
-
-#endif /* _LINUX_MM_TYPES_H */
diff --git a/ANDROID_3.4.5/include/linux/mman.h b/ANDROID_3.4.5/include/linux/mman.h
deleted file mode 100644
index 8b74e9b1..00000000
--- a/ANDROID_3.4.5/include/linux/mman.h
+++ /dev/null
@@ -1,93 +0,0 @@
-#ifndef _LINUX_MMAN_H
-#define _LINUX_MMAN_H
-
-#include <asm/mman.h>
-
-#define MREMAP_MAYMOVE	1
-#define MREMAP_FIXED	2
-
-#define OVERCOMMIT_GUESS		0
-#define OVERCOMMIT_ALWAYS		1
-#define OVERCOMMIT_NEVER		2
-
-#ifdef __KERNEL__
-#include <linux/mm.h>
-#include <linux/percpu_counter.h>
-
-#include <linux/atomic.h>
-
-extern int sysctl_overcommit_memory;
-extern int sysctl_overcommit_ratio;
-extern struct percpu_counter vm_committed_as;
-
-static inline void vm_acct_memory(long pages)
-{
-	percpu_counter_add(&vm_committed_as, pages);
-}
-
-static inline void vm_unacct_memory(long pages)
-{
-	vm_acct_memory(-pages);
-}
-
-/*
- * Allow architectures to handle additional protection bits
- */
-
-#ifndef arch_calc_vm_prot_bits
-#define arch_calc_vm_prot_bits(prot) 0
-#endif
-
-#ifndef arch_vm_get_page_prot
-#define arch_vm_get_page_prot(vm_flags) __pgprot(0)
-#endif
-
-#ifndef arch_validate_prot
-/*
- * This is called from mprotect().  PROT_GROWSDOWN and PROT_GROWSUP have
- * already been masked out.
- *
- * Returns true if the prot flags are valid
- */
-static inline int arch_validate_prot(unsigned long prot)
-{
-	return (prot & ~(PROT_READ | PROT_WRITE | PROT_EXEC | PROT_SEM)) == 0;
-}
-#define arch_validate_prot arch_validate_prot
-#endif
-
-/*
- * Optimisation macro.  It is equivalent to:
- *      (x & bit1) ? bit2 : 0
- * but this version is faster.
- * ("bit1" and "bit2" must be single bits)
- */
-#define _calc_vm_trans(x, bit1, bit2) \
-  ((bit1) <= (bit2) ? ((x) & (bit1)) * ((bit2) / (bit1)) \
-   : ((x) & (bit1)) / ((bit1) / (bit2)))
-
-/*
- * Combine the mmap "prot" argument into "vm_flags" used internally.
- */
-static inline unsigned long
-calc_vm_prot_bits(unsigned long prot)
-{
-	return _calc_vm_trans(prot, PROT_READ,  VM_READ ) |
-	       _calc_vm_trans(prot, PROT_WRITE, VM_WRITE) |
-	       _calc_vm_trans(prot, PROT_EXEC,  VM_EXEC) |
-	       arch_calc_vm_prot_bits(prot);
-}
-
-/*
- * Combine the mmap "flags" argument into "vm_flags" used internally.
- */
-static inline unsigned long
-calc_vm_flag_bits(unsigned long flags)
-{
-	return _calc_vm_trans(flags, MAP_GROWSDOWN,  VM_GROWSDOWN ) |
-	       _calc_vm_trans(flags, MAP_DENYWRITE,  VM_DENYWRITE ) |
-	       _calc_vm_trans(flags, MAP_EXECUTABLE, VM_EXECUTABLE) |
-	       _calc_vm_trans(flags, MAP_LOCKED,     VM_LOCKED    );
-}
-#endif /* __KERNEL__ */
-#endif /* _LINUX_MMAN_H */
diff --git a/ANDROID_3.4.5/include/linux/mmc/Kbuild b/ANDROID_3.4.5/include/linux/mmc/Kbuild
deleted file mode 100644
index 1fb26448..00000000
--- a/ANDROID_3.4.5/include/linux/mmc/Kbuild
+++ /dev/null
@@ -1 +0,0 @@
-header-y += ioctl.h
diff --git a/ANDROID_3.4.5/include/linux/mmc/boot.h b/ANDROID_3.4.5/include/linux/mmc/boot.h
deleted file mode 100644
index 23acc3ba..00000000
--- a/ANDROID_3.4.5/include/linux/mmc/boot.h
+++ /dev/null
@@ -1,7 +0,0 @@
-#ifndef LINUX_MMC_BOOT_H
-#define LINUX_MMC_BOOT_H
-
-enum { MMC_PROGRESS_ENTER, MMC_PROGRESS_INIT,
-       MMC_PROGRESS_LOAD, MMC_PROGRESS_DONE };
-
-#endif /* LINUX_MMC_BOOT_H */
diff --git a/ANDROID_3.4.5/include/linux/mmc/card.h b/ANDROID_3.4.5/include/linux/mmc/card.h
deleted file mode 100644
index 629b823f..00000000
--- a/ANDROID_3.4.5/include/linux/mmc/card.h
+++ /dev/null
@@ -1,494 +0,0 @@
-/*
- *  linux/include/linux/mmc/card.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  Card driver specific definitions.
- */
-#ifndef LINUX_MMC_CARD_H
-#define LINUX_MMC_CARD_H
-
-#include <linux/device.h>
-#include <linux/mmc/core.h>
-#include <linux/mod_devicetable.h>
-
-struct mmc_cid {
-	unsigned int		manfid;
-	char			prod_name[8];
-	unsigned int		serial;
-	unsigned short		oemid;
-	unsigned short		year;
-	unsigned char		hwrev;
-	unsigned char		fwrev;
-	unsigned char		month;
-};
-
-struct mmc_csd {
-	unsigned char		structure;
-	unsigned char		mmca_vsn;
-	unsigned short		cmdclass;
-	unsigned short		tacc_clks;
-	unsigned int		tacc_ns;
-	unsigned int		c_size;
-	unsigned int		r2w_factor;
-	unsigned int		max_dtr;
-	unsigned int		erase_size;		/* In sectors */
-	unsigned int		read_blkbits;
-	unsigned int		write_blkbits;
-	unsigned int		capacity;
-	unsigned int		read_partial:1,
-				read_misalign:1,
-				write_partial:1,
-				write_misalign:1;
-};
-
-struct mmc_ext_csd {
-	u8			rev;
-	u8			erase_group_def;
-	u8			sec_feature_support;
-	u8			rel_sectors;
-	u8			rel_param;
-	u8			part_config;
-	u8			cache_ctrl;
-	u8			rst_n_function;
-	unsigned int		part_time;		/* Units: ms */
-	unsigned int		sa_timeout;		/* Units: 100ns */
-	unsigned int		generic_cmd6_time;	/* Units: 10ms */
-	unsigned int            power_off_longtime;     /* Units: ms */
-	unsigned int		hs_max_dtr;
-	unsigned int		sectors;
-	unsigned int		card_type;
-	unsigned int		hc_erase_size;		/* In sectors */
-	unsigned int		hc_erase_timeout;	/* In milliseconds */
-	unsigned int		sec_trim_mult;	/* Secure trim multiplier  */
-	unsigned int		sec_erase_mult;	/* Secure erase multiplier */
-	unsigned int		trim_timeout;		/* In milliseconds */
-	bool			enhanced_area_en;	/* enable bit */
-	unsigned long long	enhanced_area_offset;	/* Units: Byte */
-	unsigned int		enhanced_area_size;	/* Units: KB */
-	unsigned int		cache_size;		/* Units: KB */
-	bool			hpi_en;			/* HPI enablebit */
-	bool			hpi;			/* HPI support bit */
-	unsigned int		hpi_cmd;		/* cmd used as HPI */
-	unsigned int            data_sector_size;       /* 512 bytes or 4KB */
-	unsigned int            data_tag_unit_size;     /* DATA TAG UNIT size */
-	unsigned int		boot_ro_lock;		/* ro lock support */
-	bool			boot_ro_lockable;
-	u8			raw_partition_support;	/* 160 */
-	u8			raw_erased_mem_count;	/* 181 */
-	u8			raw_ext_csd_structure;	/* 194 */
-	u8			raw_card_type;		/* 196 */
-	u8			out_of_int_time;	/* 198 */
-	u8			raw_s_a_timeout;		/* 217 */
-	u8			raw_hc_erase_gap_size;	/* 221 */
-	u8			raw_erase_timeout_mult;	/* 223 */
-	u8			raw_hc_erase_grp_size;	/* 224 */
-	u8			raw_sec_trim_mult;	/* 229 */
-	u8			raw_sec_erase_mult;	/* 230 */
-	u8			raw_sec_feature_support;/* 231 */
-	u8			raw_trim_mult;		/* 232 */
-	u8			raw_sectors[4];		/* 212 - 4 bytes */
-
-	unsigned int            feature_support;
-#define MMC_DISCARD_FEATURE	BIT(0)                  /* CMD38 feature */
-};
-
-struct sd_scr {
-	unsigned char		sda_vsn;
-	unsigned char		sda_spec3;
-	unsigned char		bus_widths;
-#define SD_SCR_BUS_WIDTH_1	(1<<0)
-#define SD_SCR_BUS_WIDTH_4	(1<<2)
-	unsigned char		cmds;
-#define SD_SCR_CMD20_SUPPORT   (1<<0)
-#define SD_SCR_CMD23_SUPPORT   (1<<1)
-};
-
-struct sd_ssr {
-	unsigned int		au;			/* In sectors */
-	unsigned int		erase_timeout;		/* In milliseconds */
-	unsigned int		erase_offset;		/* In milliseconds */
-};
-
-struct sd_switch_caps {
-	unsigned int		hs_max_dtr;
-	unsigned int		uhs_max_dtr;
-#define HIGH_SPEED_MAX_DTR	50000000
-#define UHS_SDR104_MAX_DTR	208000000
-#define UHS_SDR50_MAX_DTR	100000000
-#define UHS_DDR50_MAX_DTR	50000000
-#define UHS_SDR25_MAX_DTR	UHS_DDR50_MAX_DTR
-#define UHS_SDR12_MAX_DTR	25000000
-	unsigned int		sd3_bus_mode;
-#define UHS_SDR12_BUS_SPEED	0
-#define HIGH_SPEED_BUS_SPEED	1
-#define UHS_SDR25_BUS_SPEED	1
-#define UHS_SDR50_BUS_SPEED	2
-#define UHS_SDR104_BUS_SPEED	3
-#define UHS_DDR50_BUS_SPEED	4
-
-#define SD_MODE_HIGH_SPEED	(1 << HIGH_SPEED_BUS_SPEED)
-#define SD_MODE_UHS_SDR12	(1 << UHS_SDR12_BUS_SPEED)
-#define SD_MODE_UHS_SDR25	(1 << UHS_SDR25_BUS_SPEED)
-#define SD_MODE_UHS_SDR50	(1 << UHS_SDR50_BUS_SPEED)
-#define SD_MODE_UHS_SDR104	(1 << UHS_SDR104_BUS_SPEED)
-#define SD_MODE_UHS_DDR50	(1 << UHS_DDR50_BUS_SPEED)
-	unsigned int		sd3_drv_type;
-#define SD_DRIVER_TYPE_B	0x01
-#define SD_DRIVER_TYPE_A	0x02
-#define SD_DRIVER_TYPE_C	0x04
-#define SD_DRIVER_TYPE_D	0x08
-	unsigned int		sd3_curr_limit;
-#define SD_SET_CURRENT_LIMIT_200	0
-#define SD_SET_CURRENT_LIMIT_400	1
-#define SD_SET_CURRENT_LIMIT_600	2
-#define SD_SET_CURRENT_LIMIT_800	3
-
-#define SD_MAX_CURRENT_200	(1 << SD_SET_CURRENT_LIMIT_200)
-#define SD_MAX_CURRENT_400	(1 << SD_SET_CURRENT_LIMIT_400)
-#define SD_MAX_CURRENT_600	(1 << SD_SET_CURRENT_LIMIT_600)
-#define SD_MAX_CURRENT_800	(1 << SD_SET_CURRENT_LIMIT_800)
-};
-
-struct sdio_cccr {
-	unsigned int		sdio_vsn;
-	unsigned int		sd_vsn;
-	unsigned int		multi_block:1,
-				low_speed:1,
-				wide_bus:1,
-				high_power:1,
-				high_speed:1,
-				disable_cd:1;
-};
-
-struct sdio_cis {
-	unsigned short		vendor;
-	unsigned short		device;
-	unsigned short		blksize;
-	unsigned int		max_dtr;
-};
-
-struct mmc_host;
-struct sdio_func;
-struct sdio_func_tuple;
-
-#define SDIO_MAX_FUNCS		7
-
-/* The number of MMC physical partitions.  These consist of:
- * boot partitions (2), general purpose partitions (4) in MMC v4.4.
- */
-#define MMC_NUM_BOOT_PARTITION	2
-#define MMC_NUM_GP_PARTITION	4
-#define MMC_NUM_PHY_PARTITION	6
-#define MAX_MMC_PART_NAME_LEN	20
-
-/*
- * MMC Physical partitions
- */
-struct mmc_part {
-	unsigned int	size;	/* partition size (in bytes) */
-	unsigned int	part_cfg;	/* partition type */
-	char	name[MAX_MMC_PART_NAME_LEN];
-	bool	force_ro;	/* to make boot parts RO by default */
-	unsigned int	area_type;
-#define MMC_BLK_DATA_AREA_MAIN	(1<<0)
-#define MMC_BLK_DATA_AREA_BOOT	(1<<1)
-#define MMC_BLK_DATA_AREA_GP	(1<<2)
-};
-
-/*
- * MMC device
- */
-struct mmc_card {
-	struct mmc_host		*host;		/* the host this device belongs to */
-	struct device		dev;		/* the device */
-	unsigned int		rca;		/* relative card address of device */
-	unsigned int		type;		/* card type */
-#define MMC_TYPE_MMC		0		/* MMC card */
-#define MMC_TYPE_SD		1		/* SD card */
-#define MMC_TYPE_SDIO		2		/* SDIO card */
-#define MMC_TYPE_SD_COMBO	3		/* SD combo (IO+mem) card */
-	unsigned int		state;		/* (our) card state */
-#define MMC_STATE_PRESENT	(1<<0)		/* present in sysfs */
-#define MMC_STATE_READONLY	(1<<1)		/* card is read-only */
-#define MMC_STATE_HIGHSPEED	(1<<2)		/* card is in high speed mode */
-#define MMC_STATE_BLOCKADDR	(1<<3)		/* card uses block-addressing */
-#define MMC_STATE_HIGHSPEED_DDR (1<<4)		/* card is in high speed mode */
-#define MMC_STATE_ULTRAHIGHSPEED (1<<5)		/* card is in ultra high speed mode */
-#define MMC_CARD_SDXC		(1<<6)		/* card is SDXC */
-#define MMC_CARD_REMOVED	(1<<7)		/* card has been removed */
-#define MMC_STATE_HIGHSPEED_200	(1<<8)		/* card is in HS200 mode */
-#define MMC_STATE_SLEEP		(1<<9)		/* card is in sleep state */
-	unsigned int		quirks; 	/* card quirks */
-#define MMC_QUIRK_LENIENT_FN0	(1<<0)		/* allow SDIO FN0 writes outside of the VS CCCR range */
-#define MMC_QUIRK_BLKSZ_FOR_BYTE_MODE (1<<1)	/* use func->cur_blksize */
-						/* for byte mode */
-#define MMC_QUIRK_NONSTD_SDIO	(1<<2)		/* non-standard SDIO card attached */
-						/* (missing CIA registers) */
-#define MMC_QUIRK_BROKEN_CLK_GATING (1<<3)	/* clock gating the sdio bus will make card fail */
-#define MMC_QUIRK_NONSTD_FUNC_IF (1<<4)		/* SDIO card has nonstd function interfaces */
-#define MMC_QUIRK_DISABLE_CD	(1<<5)		/* disconnect CD/DAT[3] resistor */
-#define MMC_QUIRK_INAND_CMD38	(1<<6)		/* iNAND devices have broken CMD38 */
-#define MMC_QUIRK_BLK_NO_CMD23	(1<<7)		/* Avoid CMD23 for regular multiblock */
-#define MMC_QUIRK_BROKEN_BYTE_MODE_512 (1<<8)	/* Avoid sending 512 bytes in */
-#define MMC_QUIRK_LONG_READ_TIME (1<<9)		/* Data read time > CSD says */
-						/* byte mode */
-	unsigned int    poweroff_notify_state;	/* eMMC4.5 notify feature */
-#define MMC_NO_POWER_NOTIFICATION	0
-#define MMC_POWERED_ON			1
-#define MMC_POWEROFF_SHORT		2
-#define MMC_POWEROFF_LONG		3
-
-	unsigned int		erase_size;	/* erase size in sectors */
- 	unsigned int		erase_shift;	/* if erase unit is power 2 */
- 	unsigned int		pref_erase;	/* in sectors */
- 	u8			erased_byte;	/* value of erased bytes */
-
-	u32			raw_cid[4];	/* raw card CID */
-	u32			raw_csd[4];	/* raw card CSD */
-	u32			raw_scr[2];	/* raw card SCR */
-	struct mmc_cid		cid;		/* card identification */
-	struct mmc_csd		csd;		/* card specific */
-	struct mmc_ext_csd	ext_csd;	/* mmc v4 extended card specific */
-	struct sd_scr		scr;		/* extra SD information */
-	struct sd_ssr		ssr;		/* yet more SD information */
-	struct sd_switch_caps	sw_caps;	/* switch (CMD6) caps */
-
-	unsigned int		sdio_funcs;	/* number of SDIO functions */
-	struct sdio_cccr	cccr;		/* common card info */
-	struct sdio_cis		cis;		/* common tuple info */
-	struct sdio_func	*sdio_func[SDIO_MAX_FUNCS]; /* SDIO functions (devices) */
-	struct sdio_func	*sdio_single_irq; /* SDIO function when only one IRQ active */
-	unsigned		num_info;	/* number of info strings */
-	const char		**info;		/* info strings */
-	struct sdio_func_tuple	*tuples;	/* unknown common tuples */
-
-	unsigned int		sd_bus_speed;	/* Bus Speed Mode set for the card */
-
-	struct dentry		*debugfs_root;
-	struct mmc_part	part[MMC_NUM_PHY_PARTITION]; /* physical partitions */
-	unsigned int    nr_parts;
-};
-
-/*
- * This function fill contents in mmc_part.
- */
-static inline void mmc_part_add(struct mmc_card *card, unsigned int size,
-			unsigned int part_cfg, char *name, int idx, bool ro,
-			int area_type)
-{
-	card->part[card->nr_parts].size = size;
-	card->part[card->nr_parts].part_cfg = part_cfg;
-	sprintf(card->part[card->nr_parts].name, name, idx);
-	card->part[card->nr_parts].force_ro = ro;
-	card->part[card->nr_parts].area_type = area_type;
-	card->nr_parts++;
-}
-
-/*
- *  The world is not perfect and supplies us with broken mmc/sdio devices.
- *  For at least some of these bugs we need a work-around.
- */
-
-struct mmc_fixup {
-	/* CID-specific fields. */
-	const char *name;
-
-	/* Valid revision range */
-	u64 rev_start, rev_end;
-
-	unsigned int manfid;
-	unsigned short oemid;
-
-	/* SDIO-specfic fields. You can use SDIO_ANY_ID here of course */
-	u16 cis_vendor, cis_device;
-
-	void (*vendor_fixup)(struct mmc_card *card, int data);
-	int data;
-};
-
-#define CID_MANFID_ANY (-1u)
-#define CID_OEMID_ANY ((unsigned short) -1)
-#define CID_NAME_ANY (NULL)
-
-#define END_FIXUP { 0 }
-
-#define _FIXUP_EXT(_name, _manfid, _oemid, _rev_start, _rev_end,	\
-		   _cis_vendor, _cis_device,				\
-		   _fixup, _data)					\
-	{						   \
-		.name = (_name),			   \
-		.manfid = (_manfid),			   \
-		.oemid = (_oemid),			   \
-		.rev_start = (_rev_start),		   \
-		.rev_end = (_rev_end),			   \
-		.cis_vendor = (_cis_vendor),		   \
-		.cis_device = (_cis_device),		   \
-		.vendor_fixup = (_fixup),		   \
-		.data = (_data),			   \
-	 }
-
-#define MMC_FIXUP_REV(_name, _manfid, _oemid, _rev_start, _rev_end,	\
-		      _fixup, _data)					\
-	_FIXUP_EXT(_name, _manfid,					\
-		   _oemid, _rev_start, _rev_end,			\
-		   SDIO_ANY_ID, SDIO_ANY_ID,				\
-		   _fixup, _data)					\
-
-#define MMC_FIXUP(_name, _manfid, _oemid, _fixup, _data) \
-	MMC_FIXUP_REV(_name, _manfid, _oemid, 0, -1ull, _fixup, _data)
-
-#define SDIO_FIXUP(_vendor, _device, _fixup, _data)			\
-	_FIXUP_EXT(CID_NAME_ANY, CID_MANFID_ANY,			\
-		    CID_OEMID_ANY, 0, -1ull,				\
-		   _vendor, _device,					\
-		   _fixup, _data)					\
-
-#define cid_rev(hwrev, fwrev, year, month)	\
-	(((u64) hwrev) << 40 |                  \
-	 ((u64) fwrev) << 32 |                  \
-	 ((u64) year) << 16 |                   \
-	 ((u64) month))
-
-#define cid_rev_card(card)		  \
-	cid_rev(card->cid.hwrev,	  \
-		    card->cid.fwrev,      \
-		    card->cid.year,	  \
-		    card->cid.month)
-
-/*
- * Unconditionally quirk add/remove.
- */
-
-static inline void __maybe_unused add_quirk(struct mmc_card *card, int data)
-{
-	card->quirks |= data;
-}
-
-static inline void __maybe_unused remove_quirk(struct mmc_card *card, int data)
-{
-	card->quirks &= ~data;
-}
-
-#define mmc_card_mmc(c)		((c)->type == MMC_TYPE_MMC)
-#define mmc_card_sd(c)		((c)->type == MMC_TYPE_SD)
-#define mmc_card_sdio(c)	((c)->type == MMC_TYPE_SDIO)
-
-#define mmc_card_present(c)	((c)->state & MMC_STATE_PRESENT)
-#define mmc_card_readonly(c)	((c)->state & MMC_STATE_READONLY)
-#define mmc_card_highspeed(c)	((c)->state & MMC_STATE_HIGHSPEED)
-#define mmc_card_hs200(c)	((c)->state & MMC_STATE_HIGHSPEED_200)
-#define mmc_card_blockaddr(c)	((c)->state & MMC_STATE_BLOCKADDR)
-#define mmc_card_ddr_mode(c)	((c)->state & MMC_STATE_HIGHSPEED_DDR)
-#define mmc_card_uhs(c)		((c)->state & MMC_STATE_ULTRAHIGHSPEED)
-#define mmc_sd_card_uhs(c)	((c)->state & MMC_STATE_ULTRAHIGHSPEED)
-#define mmc_card_ext_capacity(c) ((c)->state & MMC_CARD_SDXC)
-#define mmc_card_removed(c)	((c) && ((c)->state & MMC_CARD_REMOVED))
-#define mmc_card_is_sleep(c)	((c)->state & MMC_STATE_SLEEP)
-
-#define mmc_card_set_present(c)	((c)->state |= MMC_STATE_PRESENT)
-#define mmc_card_set_readonly(c) ((c)->state |= MMC_STATE_READONLY)
-#define mmc_card_set_highspeed(c) ((c)->state |= MMC_STATE_HIGHSPEED)
-#define mmc_card_set_hs200(c)	((c)->state |= MMC_STATE_HIGHSPEED_200)
-#define mmc_card_set_blockaddr(c) ((c)->state |= MMC_STATE_BLOCKADDR)
-#define mmc_card_set_ddr_mode(c) ((c)->state |= MMC_STATE_HIGHSPEED_DDR)
-#define mmc_card_set_uhs(c) ((c)->state |= MMC_STATE_ULTRAHIGHSPEED)
-#define mmc_sd_card_set_uhs(c) ((c)->state |= MMC_STATE_ULTRAHIGHSPEED)
-#define mmc_card_set_ext_capacity(c) ((c)->state |= MMC_CARD_SDXC)
-#define mmc_card_set_removed(c) ((c)->state |= MMC_CARD_REMOVED)
-#define mmc_card_set_sleep(c)	((c)->state |= MMC_STATE_SLEEP)
-
-#define mmc_card_clr_sleep(c)	((c)->state &= ~MMC_STATE_SLEEP)
-/*
- * Quirk add/remove for MMC products.
- */
-
-static inline void __maybe_unused add_quirk_mmc(struct mmc_card *card, int data)
-{
-	if (mmc_card_mmc(card))
-		card->quirks |= data;
-}
-
-static inline void __maybe_unused remove_quirk_mmc(struct mmc_card *card,
-						   int data)
-{
-	if (mmc_card_mmc(card))
-		card->quirks &= ~data;
-}
-
-/*
- * Quirk add/remove for SD products.
- */
-
-static inline void __maybe_unused add_quirk_sd(struct mmc_card *card, int data)
-{
-	if (mmc_card_sd(card))
-		card->quirks |= data;
-}
-
-static inline void __maybe_unused remove_quirk_sd(struct mmc_card *card,
-						   int data)
-{
-	if (mmc_card_sd(card))
-		card->quirks &= ~data;
-}
-
-static inline int mmc_card_lenient_fn0(const struct mmc_card *c)
-{
-	return c->quirks & MMC_QUIRK_LENIENT_FN0;
-}
-
-static inline int mmc_blksz_for_byte_mode(const struct mmc_card *c)
-{
-	return c->quirks & MMC_QUIRK_BLKSZ_FOR_BYTE_MODE;
-}
-
-static inline int mmc_card_disable_cd(const struct mmc_card *c)
-{
-	return c->quirks & MMC_QUIRK_DISABLE_CD;
-}
-
-static inline int mmc_card_nonstd_func_interface(const struct mmc_card *c)
-{
-	return c->quirks & MMC_QUIRK_NONSTD_FUNC_IF;
-}
-
-static inline int mmc_card_broken_byte_mode_512(const struct mmc_card *c)
-{
-	return c->quirks & MMC_QUIRK_BROKEN_BYTE_MODE_512;
-}
-
-static inline int mmc_card_long_read_time(const struct mmc_card *c)
-{
-	return c->quirks & MMC_QUIRK_LONG_READ_TIME;
-}
-
-#define mmc_card_name(c)	((c)->cid.prod_name)
-#define mmc_card_id(c)		(dev_name(&(c)->dev))
-
-#define mmc_dev_to_card(d)	container_of(d, struct mmc_card, dev)
-
-#define mmc_list_to_card(l)	container_of(l, struct mmc_card, node)
-#define mmc_get_drvdata(c)	dev_get_drvdata(&(c)->dev)
-#define mmc_set_drvdata(c,d)	dev_set_drvdata(&(c)->dev, d)
-
-/*
- * MMC device driver (e.g., Flash card, I/O card...)
- */
-struct mmc_driver {
-	struct device_driver drv;
-	int (*probe)(struct mmc_card *);
-	void (*remove)(struct mmc_card *);
-	int (*suspend)(struct mmc_card *);
-	int (*resume)(struct mmc_card *);
-};
-
-extern int mmc_register_driver(struct mmc_driver *);
-extern void mmc_unregister_driver(struct mmc_driver *);
-
-extern void mmc_fixup_device(struct mmc_card *card,
-			     const struct mmc_fixup *table);
-
-#endif /* LINUX_MMC_CARD_H */
diff --git a/ANDROID_3.4.5/include/linux/mmc/cd-gpio.h b/ANDROID_3.4.5/include/linux/mmc/cd-gpio.h
deleted file mode 100644
index cefaba03..00000000
--- a/ANDROID_3.4.5/include/linux/mmc/cd-gpio.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- * Generic GPIO card-detect helper header
- *
- * Copyright (C) 2011, Guennadi Liakhovetski <g.liakhovetski@gmx.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef MMC_CD_GPIO_H
-#define MMC_CD_GPIO_H
-
-struct mmc_host;
-int mmc_cd_gpio_request(struct mmc_host *host, unsigned int gpio);
-void mmc_cd_gpio_free(struct mmc_host *host);
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/mmc/core.h b/ANDROID_3.4.5/include/linux/mmc/core.h
deleted file mode 100644
index 1b431c72..00000000
--- a/ANDROID_3.4.5/include/linux/mmc/core.h
+++ /dev/null
@@ -1,197 +0,0 @@
-/*
- *  linux/include/linux/mmc/core.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef LINUX_MMC_CORE_H
-#define LINUX_MMC_CORE_H
-
-#include <linux/interrupt.h>
-#include <linux/completion.h>
-
-struct request;
-struct mmc_data;
-struct mmc_request;
-
-struct mmc_command {
-	u32			opcode;
-	u32			arg;
-	u32			resp[4];
-	unsigned int		flags;		/* expected response type */
-#define MMC_RSP_PRESENT	(1 << 0)
-#define MMC_RSP_136	(1 << 1)		/* 136 bit response */
-#define MMC_RSP_CRC	(1 << 2)		/* expect valid crc */
-#define MMC_RSP_BUSY	(1 << 3)		/* card may send busy */
-#define MMC_RSP_OPCODE	(1 << 4)		/* response contains opcode */
-
-#define MMC_CMD_MASK	(3 << 5)		/* non-SPI command type */
-#define MMC_CMD_AC	(0 << 5)
-#define MMC_CMD_ADTC	(1 << 5)
-#define MMC_CMD_BC	(2 << 5)
-#define MMC_CMD_BCR	(3 << 5)
-
-#define MMC_RSP_SPI_S1	(1 << 7)		/* one status byte */
-#define MMC_RSP_SPI_S2	(1 << 8)		/* second byte */
-#define MMC_RSP_SPI_B4	(1 << 9)		/* four data bytes */
-#define MMC_RSP_SPI_BUSY (1 << 10)		/* card may send busy */
-
-/*
- * These are the native response types, and correspond to valid bit
- * patterns of the above flags.  One additional valid pattern
- * is all zeros, which means we don't expect a response.
- */
-#define MMC_RSP_NONE	(0)
-#define MMC_RSP_R1	(MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE)
-#define MMC_RSP_R1B	(MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE|MMC_RSP_BUSY)
-#define MMC_RSP_R2	(MMC_RSP_PRESENT|MMC_RSP_136|MMC_RSP_CRC)
-#define MMC_RSP_R3	(MMC_RSP_PRESENT)
-#define MMC_RSP_R4	(MMC_RSP_PRESENT)
-#define MMC_RSP_R5	(MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE)
-#define MMC_RSP_R6	(MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE)
-#define MMC_RSP_R7	(MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE)
-
-#define mmc_resp_type(cmd)	((cmd)->flags & (MMC_RSP_PRESENT|MMC_RSP_136|MMC_RSP_CRC|MMC_RSP_BUSY|MMC_RSP_OPCODE))
-
-/*
- * These are the SPI response types for MMC, SD, and SDIO cards.
- * Commands return R1, with maybe more info.  Zero is an error type;
- * callers must always provide the appropriate MMC_RSP_SPI_Rx flags.
- */
-#define MMC_RSP_SPI_R1	(MMC_RSP_SPI_S1)
-#define MMC_RSP_SPI_R1B	(MMC_RSP_SPI_S1|MMC_RSP_SPI_BUSY)
-#define MMC_RSP_SPI_R2	(MMC_RSP_SPI_S1|MMC_RSP_SPI_S2)
-#define MMC_RSP_SPI_R3	(MMC_RSP_SPI_S1|MMC_RSP_SPI_B4)
-#define MMC_RSP_SPI_R4	(MMC_RSP_SPI_S1|MMC_RSP_SPI_B4)
-#define MMC_RSP_SPI_R5	(MMC_RSP_SPI_S1|MMC_RSP_SPI_S2)
-#define MMC_RSP_SPI_R7	(MMC_RSP_SPI_S1|MMC_RSP_SPI_B4)
-
-#define mmc_spi_resp_type(cmd)	((cmd)->flags & \
-		(MMC_RSP_SPI_S1|MMC_RSP_SPI_BUSY|MMC_RSP_SPI_S2|MMC_RSP_SPI_B4))
-
-/*
- * These are the command types.
- */
-#define mmc_cmd_type(cmd)	((cmd)->flags & MMC_CMD_MASK)
-
-	unsigned int		retries;	/* max number of retries */
-	unsigned int		error;		/* command error */
-
-/*
- * Standard errno values are used for errors, but some have specific
- * meaning in the MMC layer:
- *
- * ETIMEDOUT    Card took too long to respond
- * EILSEQ       Basic format problem with the received or sent data
- *              (e.g. CRC check failed, incorrect opcode in response
- *              or bad end bit)
- * EINVAL       Request cannot be performed because of restrictions
- *              in hardware and/or the driver
- * ENOMEDIUM    Host can determine that the slot is empty and is
- *              actively failing requests
- */
-
-	unsigned int		cmd_timeout_ms;	/* in milliseconds */
-
-	struct mmc_data		*data;		/* data segment associated with cmd */
-	struct mmc_request	*mrq;		/* associated request */
-};
-
-struct mmc_data {
-	unsigned int		timeout_ns;	/* data timeout (in ns, max 80ms) */
-	unsigned int		timeout_clks;	/* data timeout (in clocks) */
-	unsigned int		blksz;		/* data block size */
-	unsigned int		blocks;		/* number of blocks */
-	unsigned int		error;		/* data error */
-	unsigned int		flags;
-
-#define MMC_DATA_WRITE	(1 << 8)
-#define MMC_DATA_READ	(1 << 9)
-#define MMC_DATA_STREAM	(1 << 10)
-
-	unsigned int		bytes_xfered;
-
-	struct mmc_command	*stop;		/* stop command */
-	struct mmc_request	*mrq;		/* associated request */
-
-	unsigned int		sg_len;		/* size of scatter list */
-	struct scatterlist	*sg;		/* I/O scatter list */
-	s32			host_cookie;	/* host private data */
-};
-
-struct mmc_request {
-	struct mmc_command	*sbc;		/* SET_BLOCK_COUNT for multiblock */
-	struct mmc_command	*cmd;
-	struct mmc_data		*data;
-	struct mmc_command	*stop;
-
-	struct completion	completion;
-	void			(*done)(struct mmc_request *);/* completion function */
-};
-
-struct mmc_host;
-struct mmc_card;
-struct mmc_async_req;
-
-extern struct mmc_async_req *mmc_start_req(struct mmc_host *,
-					   struct mmc_async_req *, int *);
-extern int mmc_interrupt_hpi(struct mmc_card *);
-extern void mmc_wait_for_req(struct mmc_host *, struct mmc_request *);
-extern int mmc_wait_for_cmd(struct mmc_host *, struct mmc_command *, int);
-extern int mmc_app_cmd(struct mmc_host *, struct mmc_card *);
-extern int mmc_wait_for_app_cmd(struct mmc_host *, struct mmc_card *,
-	struct mmc_command *, int);
-extern int mmc_switch(struct mmc_card *, u8, u8, u8, unsigned int);
-
-#define MMC_ERASE_ARG		0x00000000
-#define MMC_SECURE_ERASE_ARG	0x80000000
-#define MMC_TRIM_ARG		0x00000001
-#define MMC_DISCARD_ARG		0x00000003
-#define MMC_SECURE_TRIM1_ARG	0x80000001
-#define MMC_SECURE_TRIM2_ARG	0x80008000
-
-#define MMC_SECURE_ARGS		0x80000000
-#define MMC_TRIM_ARGS		0x00008001
-
-extern int mmc_erase(struct mmc_card *card, unsigned int from, unsigned int nr,
-		     unsigned int arg);
-extern int mmc_can_erase(struct mmc_card *card);
-extern int mmc_can_trim(struct mmc_card *card);
-extern int mmc_can_discard(struct mmc_card *card);
-extern int mmc_can_sanitize(struct mmc_card *card);
-extern int mmc_can_secure_erase_trim(struct mmc_card *card);
-extern int mmc_erase_group_aligned(struct mmc_card *card, unsigned int from,
-				   unsigned int nr);
-extern unsigned int mmc_calc_max_discard(struct mmc_card *card);
-
-extern int mmc_set_blocklen(struct mmc_card *card, unsigned int blocklen);
-extern int mmc_hw_reset(struct mmc_host *host);
-extern int mmc_hw_reset_check(struct mmc_host *host);
-extern int mmc_can_reset(struct mmc_card *card);
-
-extern void mmc_set_data_timeout(struct mmc_data *, const struct mmc_card *);
-extern unsigned int mmc_align_data_size(struct mmc_card *, unsigned int);
-
-extern int __mmc_claim_host(struct mmc_host *host, atomic_t *abort);
-extern void mmc_release_host(struct mmc_host *host);
-extern int mmc_try_claim_host(struct mmc_host *host);
-
-extern int mmc_flush_cache(struct mmc_card *);
-
-extern int mmc_detect_card_removed(struct mmc_host *host);
-
-/**
- *	mmc_claim_host - exclusively claim a host
- *	@host: mmc host to claim
- *
- *	Claim a host for a set of operations.
- */
-static inline void mmc_claim_host(struct mmc_host *host)
-{
-	__mmc_claim_host(host, NULL);
-}
-
-extern u32 mmc_vddrange_to_ocrmask(int vdd_min, int vdd_max);
-
-#endif /* LINUX_MMC_CORE_H */
diff --git a/ANDROID_3.4.5/include/linux/mmc/dw_mmc.h b/ANDROID_3.4.5/include/linux/mmc/dw_mmc.h
deleted file mode 100644
index 8f66e28f..00000000
--- a/ANDROID_3.4.5/include/linux/mmc/dw_mmc.h
+++ /dev/null
@@ -1,253 +0,0 @@
-/*
- * Synopsys DesignWare Multimedia Card Interface driver
- *  (Based on NXP driver for lpc 31xx)
- *
- * Copyright (C) 2009 NXP Semiconductors
- * Copyright (C) 2009, 2010 Imagination Technologies Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef LINUX_MMC_DW_MMC_H
-#define LINUX_MMC_DW_MMC_H
-
-#include <linux/scatterlist.h>
-
-#define MAX_MCI_SLOTS	2
-
-enum dw_mci_state {
-	STATE_IDLE = 0,
-	STATE_SENDING_CMD,
-	STATE_SENDING_DATA,
-	STATE_DATA_BUSY,
-	STATE_SENDING_STOP,
-	STATE_DATA_ERROR,
-};
-
-enum {
-	EVENT_CMD_COMPLETE = 0,
-	EVENT_XFER_COMPLETE,
-	EVENT_DATA_COMPLETE,
-	EVENT_DATA_ERROR,
-	EVENT_XFER_ERROR
-};
-
-struct mmc_data;
-
-/**
- * struct dw_mci - MMC controller state shared between all slots
- * @lock: Spinlock protecting the queue and associated data.
- * @regs: Pointer to MMIO registers.
- * @sg: Scatterlist entry currently being processed by PIO code, if any.
- * @sg_miter: PIO mapping scatterlist iterator.
- * @cur_slot: The slot which is currently using the controller.
- * @mrq: The request currently being processed on @cur_slot,
- *	or NULL if the controller is idle.
- * @cmd: The command currently being sent to the card, or NULL.
- * @data: The data currently being transferred, or NULL if no data
- *	transfer is in progress.
- * @use_dma: Whether DMA channel is initialized or not.
- * @using_dma: Whether DMA is in use for the current transfer.
- * @sg_dma: Bus address of DMA buffer.
- * @sg_cpu: Virtual address of DMA buffer.
- * @dma_ops: Pointer to platform-specific DMA callbacks.
- * @cmd_status: Snapshot of SR taken upon completion of the current
- *	command. Only valid when EVENT_CMD_COMPLETE is pending.
- * @data_status: Snapshot of SR taken upon completion of the current
- *	data transfer. Only valid when EVENT_DATA_COMPLETE or
- *	EVENT_DATA_ERROR is pending.
- * @stop_cmdr: Value to be loaded into CMDR when the stop command is
- *	to be sent.
- * @dir_status: Direction of current transfer.
- * @tasklet: Tasklet running the request state machine.
- * @card_tasklet: Tasklet handling card detect.
- * @pending_events: Bitmask of events flagged by the interrupt handler
- *	to be processed by the tasklet.
- * @completed_events: Bitmask of events which the state machine has
- *	processed.
- * @state: Tasklet state.
- * @queue: List of slots waiting for access to the controller.
- * @bus_hz: The rate of @mck in Hz. This forms the basis for MMC bus
- *	rate and timeout calculations.
- * @current_speed: Configured rate of the controller.
- * @num_slots: Number of slots available.
- * @verid: Denote Version ID.
- * @data_offset: Set the offset of DATA register according to VERID.
- * @dev: Device associated with the MMC controller.
- * @pdata: Platform data associated with the MMC controller.
- * @slot: Slots sharing this MMC controller.
- * @fifo_depth: depth of FIFO.
- * @data_shift: log2 of FIFO item size.
- * @part_buf_start: Start index in part_buf.
- * @part_buf_count: Bytes of partial data in part_buf.
- * @part_buf: Simple buffer for partial fifo reads/writes.
- * @push_data: Pointer to FIFO push function.
- * @pull_data: Pointer to FIFO pull function.
- * @quirks: Set of quirks that apply to specific versions of the IP.
- * @irq_flags: The flags to be passed to request_irq.
- * @irq: The irq value to be passed to request_irq.
- *
- * Locking
- * =======
- *
- * @lock is a softirq-safe spinlock protecting @queue as well as
- * @cur_slot, @mrq and @state. These must always be updated
- * at the same time while holding @lock.
- *
- * The @mrq field of struct dw_mci_slot is also protected by @lock,
- * and must always be written at the same time as the slot is added to
- * @queue.
- *
- * @pending_events and @completed_events are accessed using atomic bit
- * operations, so they don't need any locking.
- *
- * None of the fields touched by the interrupt handler need any
- * locking. However, ordering is important: Before EVENT_DATA_ERROR or
- * EVENT_DATA_COMPLETE is set in @pending_events, all data-related
- * interrupts must be disabled and @data_status updated with a
- * snapshot of SR. Similarly, before EVENT_CMD_COMPLETE is set, the
- * CMDRDY interrupt must be disabled and @cmd_status updated with a
- * snapshot of SR, and before EVENT_XFER_COMPLETE can be set, the
- * bytes_xfered field of @data must be written. This is ensured by
- * using barriers.
- */
-struct dw_mci {
-	spinlock_t		lock;
-	void __iomem		*regs;
-
-	struct scatterlist	*sg;
-	struct sg_mapping_iter	sg_miter;
-
-	struct dw_mci_slot	*cur_slot;
-	struct mmc_request	*mrq;
-	struct mmc_command	*cmd;
-	struct mmc_data		*data;
-
-	/* DMA interface members*/
-	int			use_dma;
-	int			using_dma;
-
-	dma_addr_t		sg_dma;
-	void			*sg_cpu;
-	struct dw_mci_dma_ops	*dma_ops;
-#ifdef CONFIG_MMC_DW_IDMAC
-	unsigned int		ring_size;
-#else
-	struct dw_mci_dma_data	*dma_data;
-#endif
-	u32			cmd_status;
-	u32			data_status;
-	u32			stop_cmdr;
-	u32			dir_status;
-	struct tasklet_struct	tasklet;
-	struct work_struct	card_work;
-	unsigned long		pending_events;
-	unsigned long		completed_events;
-	enum dw_mci_state	state;
-	struct list_head	queue;
-
-	u32			bus_hz;
-	u32			current_speed;
-	u32			num_slots;
-	u32			fifoth_val;
-	u16			verid;
-	u16			data_offset;
-	struct device		dev;
-	struct dw_mci_board	*pdata;
-	struct dw_mci_slot	*slot[MAX_MCI_SLOTS];
-
-	/* FIFO push and pull */
-	int			fifo_depth;
-	int			data_shift;
-	u8			part_buf_start;
-	u8			part_buf_count;
-	union {
-		u16		part_buf16;
-		u32		part_buf32;
-		u64		part_buf;
-	};
-	void (*push_data)(struct dw_mci *host, void *buf, int cnt);
-	void (*pull_data)(struct dw_mci *host, void *buf, int cnt);
-
-	/* Workaround flags */
-	u32			quirks;
-
-	struct regulator	*vmmc;	/* Power regulator */
-	unsigned long		irq_flags; /* IRQ flags */
-	unsigned int		irq;
-};
-
-/* DMA ops for Internal/External DMAC interface */
-struct dw_mci_dma_ops {
-	/* DMA Ops */
-	int (*init)(struct dw_mci *host);
-	void (*start)(struct dw_mci *host, unsigned int sg_len);
-	void (*complete)(struct dw_mci *host);
-	void (*stop)(struct dw_mci *host);
-	void (*cleanup)(struct dw_mci *host);
-	void (*exit)(struct dw_mci *host);
-};
-
-/* IP Quirks/flags. */
-/* DTO fix for command transmission with IDMAC configured */
-#define DW_MCI_QUIRK_IDMAC_DTO			BIT(0)
-/* delay needed between retries on some 2.11a implementations */
-#define DW_MCI_QUIRK_RETRY_DELAY		BIT(1)
-/* High Speed Capable - Supports HS cards (up to 50MHz) */
-#define DW_MCI_QUIRK_HIGHSPEED			BIT(2)
-/* Unreliable card detection */
-#define DW_MCI_QUIRK_BROKEN_CARD_DETECTION	BIT(3)
-
-
-struct dma_pdata;
-
-struct block_settings {
-	unsigned short	max_segs;	/* see blk_queue_max_segments */
-	unsigned int	max_blk_size;	/* maximum size of one mmc block */
-	unsigned int	max_blk_count;	/* maximum number of blocks in one req*/
-	unsigned int	max_req_size;	/* maximum number of bytes in one req*/
-	unsigned int	max_seg_size;	/* see blk_queue_max_segment_size */
-};
-
-/* Board platform data */
-struct dw_mci_board {
-	u32 num_slots;
-
-	u32 quirks; /* Workaround / Quirk flags */
-	unsigned int bus_hz; /* Bus speed */
-
-	unsigned int caps;	/* Capabilities */
-	unsigned int caps2;	/* More capabilities */
-	/*
-	 * Override fifo depth. If 0, autodetect it from the FIFOTH register,
-	 * but note that this may not be reliable after a bootloader has used
-	 * it.
-	 */
-	unsigned int fifo_depth;
-
-	/* delay in mS before detecting cards after interrupt */
-	u32 detect_delay_ms;
-
-	int (*init)(u32 slot_id, irq_handler_t , void *);
-	int (*get_ro)(u32 slot_id);
-	int (*get_cd)(u32 slot_id);
-	int (*get_ocr)(u32 slot_id);
-	int (*get_bus_wd)(u32 slot_id);
-	/*
-	 * Enable power to selected slot and set voltage to desired level.
-	 * Voltage levels are specified using MMC_VDD_xxx defines defined
-	 * in linux/mmc/host.h file.
-	 */
-	void (*setpower)(u32 slot_id, u32 volt);
-	void (*exit)(u32 slot_id);
-	void (*select_slot)(u32 slot_id);
-
-	struct dw_mci_dma_ops *dma_ops;
-	struct dma_pdata *data;
-	struct block_settings *blk_settings;
-};
-
-#endif /* LINUX_MMC_DW_MMC_H */
diff --git a/ANDROID_3.4.5/include/linux/mmc/host.h b/ANDROID_3.4.5/include/linux/mmc/host.h
deleted file mode 100644
index 39c2def3..00000000
--- a/ANDROID_3.4.5/include/linux/mmc/host.h
+++ /dev/null
@@ -1,486 +0,0 @@
-/*
- *  linux/include/linux/mmc/host.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  Host driver specific definitions.
- */
-#ifndef LINUX_MMC_HOST_H
-#define LINUX_MMC_HOST_H
-
-#include <linux/leds.h>
-#include <linux/sched.h>
-#include <linux/device.h>
-#include <linux/fault-inject.h>
-#include <linux/wakelock.h>
-#include <linux/semaphore.h>
-
-#include <linux/mmc/core.h>
-#include <linux/mmc/pm.h>
-
-struct mmc_ios {
-	unsigned int	clock;			/* clock rate */
-	unsigned short	vdd;
-
-/* vdd stores the bit number of the selected voltage range from below. */
-
-	unsigned char	bus_mode;		/* command output mode */
-
-#define MMC_BUSMODE_OPENDRAIN	1
-#define MMC_BUSMODE_PUSHPULL	2
-
-	unsigned char	chip_select;		/* SPI chip select */
-
-#define MMC_CS_DONTCARE		0
-#define MMC_CS_HIGH		1
-#define MMC_CS_LOW		2
-
-	unsigned char	power_mode;		/* power supply mode */
-
-#define MMC_POWER_OFF		0
-#define MMC_POWER_UP		1
-#define MMC_POWER_ON		2
-
-	unsigned char	bus_width;		/* data bus width */
-
-#define MMC_BUS_WIDTH_1		0
-#define MMC_BUS_WIDTH_4		2
-#define MMC_BUS_WIDTH_8		3
-
-	unsigned char	timing;			/* timing specification used */
-
-#define MMC_TIMING_LEGACY	0
-#define MMC_TIMING_MMC_HS	1
-#define MMC_TIMING_SD_HS	2
-#define MMC_TIMING_UHS_SDR12	MMC_TIMING_LEGACY
-#define MMC_TIMING_UHS_SDR25	MMC_TIMING_SD_HS
-#define MMC_TIMING_UHS_SDR50	3
-#define MMC_TIMING_UHS_SDR104	4
-#define MMC_TIMING_UHS_DDR50	5
-#define MMC_TIMING_MMC_HS200	6
-
-#define MMC_SDR_MODE		0
-#define MMC_1_2V_DDR_MODE	1
-#define MMC_1_8V_DDR_MODE	2
-#define MMC_1_2V_SDR_MODE	3
-#define MMC_1_8V_SDR_MODE	4
-
-	unsigned char	signal_voltage;		/* signalling voltage (1.8V or 3.3V) */
-
-#define MMC_SIGNAL_VOLTAGE_330	0
-#define MMC_SIGNAL_VOLTAGE_180	1
-#define MMC_SIGNAL_VOLTAGE_120	2
-
-	unsigned char	drv_type;		/* driver type (A, B, C, D) */
-
-#define MMC_SET_DRIVER_TYPE_B	0
-#define MMC_SET_DRIVER_TYPE_A	1
-#define MMC_SET_DRIVER_TYPE_C	2
-#define MMC_SET_DRIVER_TYPE_D	3
-};
-
-struct mmc_host_ops {
-	/*
-	 * 'enable' is called when the host is claimed and 'disable' is called
-	 * when the host is released. 'enable' and 'disable' are deprecated.
-	 */
-	int (*enable)(struct mmc_host *host);
-	int (*disable)(struct mmc_host *host);
-	/*
-	 * It is optional for the host to implement pre_req and post_req in
-	 * order to support double buffering of requests (prepare one
-	 * request while another request is active).
-	 * pre_req() must always be followed by a post_req().
-	 * To undo a call made to pre_req(), call post_req() with
-	 * a nonzero err condition.
-	 */
-	void	(*post_req)(struct mmc_host *host, struct mmc_request *req,
-			    int err);
-	void	(*pre_req)(struct mmc_host *host, struct mmc_request *req,
-			   bool is_first_req);
-	void	(*request)(struct mmc_host *host, struct mmc_request *req);
-	/*
-	 * Avoid calling these three functions too often or in a "fast path",
-	 * since underlaying controller might implement them in an expensive
-	 * and/or slow way.
-	 *
-	 * Also note that these functions might sleep, so don't call them
-	 * in the atomic contexts!
-	 *
-	 * Return values for the get_ro callback should be:
-	 *   0 for a read/write card
-	 *   1 for a read-only card
-	 *   -ENOSYS when not supported (equal to NULL callback)
-	 *   or a negative errno value when something bad happened
-	 *
-	 * Return values for the get_cd callback should be:
-	 *   0 for a absent card
-	 *   1 for a present card
-	 *   -ENOSYS when not supported (equal to NULL callback)
-	 *   or a negative errno value when something bad happened
-	 */
-	void	(*set_ios)(struct mmc_host *host, struct mmc_ios *ios);
-	int	(*get_ro)(struct mmc_host *host);
-	int	(*get_cd)(struct mmc_host *host);
-	int	 (*get_slot_status)(struct mmc_host *host);
-	void (*dump_host_regs)(struct mmc_host *host);
-
-	void	(*enable_sdio_irq)(struct mmc_host *host, int enable);
-
-	/* optional callback for HC quirks */
-	void	(*init_card)(struct mmc_host *host, struct mmc_card *card);
-
-	int	(*start_signal_voltage_switch)(struct mmc_host *host, struct mmc_ios *ios);
-
-	/* The tuning command opcode value is different for SD and eMMC cards */
-	int	(*execute_tuning)(struct mmc_host *host, u32 opcode);
-	void	(*enable_preset_value)(struct mmc_host *host, bool enable);
-	int	(*select_drive_strength)(unsigned int max_dtr, int host_drv, int card_drv);
-	void	(*hw_reset)(struct mmc_host *host);
-};
-
-struct mmc_card;
-struct device;
-
-struct mmc_async_req {
-	/* active mmc request */
-	struct mmc_request	*mrq;
-	/*
-	 * Check error status of completed mmc request.
-	 * Returns 0 if success otherwise non zero.
-	 */
-	int (*err_check) (struct mmc_card *, struct mmc_async_req *);
-};
-
-struct mmc_hotplug {
-	unsigned int irq;
-	void *handler_priv;
-};
-
-struct mmc_host {
-	struct device		*parent;
-	struct device		class_dev;
-	int			index;
-	const struct mmc_host_ops *ops;
-	unsigned int		f_min;
-	unsigned int		f_max;
-	unsigned int		f_init;
-	u32			ocr_avail;
-	u32			ocr_avail_sdio;	/* SDIO-specific OCR */
-	u32			ocr_avail_sd;	/* SD-specific OCR */
-	u32			ocr_avail_mmc;	/* MMC-specific OCR */
-	struct notifier_block	pm_notify;
-
-#define MMC_VDD_165_195		0x00000080	/* VDD voltage 1.65 - 1.95 */
-#define MMC_VDD_20_21		0x00000100	/* VDD voltage 2.0 ~ 2.1 */
-#define MMC_VDD_21_22		0x00000200	/* VDD voltage 2.1 ~ 2.2 */
-#define MMC_VDD_22_23		0x00000400	/* VDD voltage 2.2 ~ 2.3 */
-#define MMC_VDD_23_24		0x00000800	/* VDD voltage 2.3 ~ 2.4 */
-#define MMC_VDD_24_25		0x00001000	/* VDD voltage 2.4 ~ 2.5 */
-#define MMC_VDD_25_26		0x00002000	/* VDD voltage 2.5 ~ 2.6 */
-#define MMC_VDD_26_27		0x00004000	/* VDD voltage 2.6 ~ 2.7 */
-#define MMC_VDD_27_28		0x00008000	/* VDD voltage 2.7 ~ 2.8 */
-#define MMC_VDD_28_29		0x00010000	/* VDD voltage 2.8 ~ 2.9 */
-#define MMC_VDD_29_30		0x00020000	/* VDD voltage 2.9 ~ 3.0 */
-#define MMC_VDD_30_31		0x00040000	/* VDD voltage 3.0 ~ 3.1 */
-#define MMC_VDD_31_32		0x00080000	/* VDD voltage 3.1 ~ 3.2 */
-#define MMC_VDD_32_33		0x00100000	/* VDD voltage 3.2 ~ 3.3 */
-#define MMC_VDD_33_34		0x00200000	/* VDD voltage 3.3 ~ 3.4 */
-#define MMC_VDD_34_35		0x00400000	/* VDD voltage 3.4 ~ 3.5 */
-#define MMC_VDD_35_36		0x00800000	/* VDD voltage 3.5 ~ 3.6 */
-
-	unsigned long		caps;		/* Host capabilities */
-
-#define MMC_CAP_4_BIT_DATA	(1 << 0)	/* Can the host do 4 bit transfers */
-#define MMC_CAP_MMC_HIGHSPEED	(1 << 1)	/* Can do MMC high-speed timing */
-#define MMC_CAP_SD_HIGHSPEED	(1 << 2)	/* Can do SD high-speed timing */
-#define MMC_CAP_SDIO_IRQ	(1 << 3)	/* Can signal pending SDIO IRQs */
-#define MMC_CAP_SPI		(1 << 4)	/* Talks only SPI protocols */
-#define MMC_CAP_NEEDS_POLL	(1 << 5)	/* Needs polling for card-detection */
-#define MMC_CAP_8_BIT_DATA	(1 << 6)	/* Can the host do 8 bit transfers */
-
-#define MMC_CAP_NONREMOVABLE	(1 << 8)	/* Nonremovable e.g. eMMC */
-#define MMC_CAP_WAIT_WHILE_BUSY	(1 << 9)	/* Waits while card is busy */
-#define MMC_CAP_ERASE		(1 << 10)	/* Allow erase/trim commands */
-#define MMC_CAP_1_8V_DDR	(1 << 11)	/* can support */
-						/* DDR mode at 1.8V */
-#define MMC_CAP_1_2V_DDR	(1 << 12)	/* can support */
-						/* DDR mode at 1.2V */
-#define MMC_CAP_POWER_OFF_CARD	(1 << 13)	/* Can power off after boot */
-#define MMC_CAP_BUS_WIDTH_TEST	(1 << 14)	/* CMD14/CMD19 bus width ok */
-#define MMC_CAP_UHS_SDR12	(1 << 15)	/* Host supports UHS SDR12 mode */
-#define MMC_CAP_UHS_SDR25	(1 << 16)	/* Host supports UHS SDR25 mode */
-#define MMC_CAP_UHS_SDR50	(1 << 17)	/* Host supports UHS SDR50 mode */
-#define MMC_CAP_UHS_SDR104	(1 << 18)	/* Host supports UHS SDR104 mode */
-#define MMC_CAP_UHS_DDR50	(1 << 19)	/* Host supports UHS DDR50 mode */
-#define MMC_CAP_SET_XPC_330	(1 << 20)	/* Host supports >150mA current at 3.3V */
-#define MMC_CAP_SET_XPC_300	(1 << 21)	/* Host supports >150mA current at 3.0V */
-#define MMC_CAP_SET_XPC_180	(1 << 22)	/* Host supports >150mA current at 1.8V */
-#define MMC_CAP_DRIVER_TYPE_A	(1 << 23)	/* Host supports Driver Type A */
-#define MMC_CAP_DRIVER_TYPE_C	(1 << 24)	/* Host supports Driver Type C */
-#define MMC_CAP_DRIVER_TYPE_D	(1 << 25)	/* Host supports Driver Type D */
-#define MMC_CAP_MAX_CURRENT_200	(1 << 26)	/* Host max current limit is 200mA */
-#define MMC_CAP_MAX_CURRENT_400	(1 << 27)	/* Host max current limit is 400mA */
-#define MMC_CAP_MAX_CURRENT_600	(1 << 28)	/* Host max current limit is 600mA */
-#define MMC_CAP_MAX_CURRENT_800	(1 << 29)	/* Host max current limit is 800mA */
-#define MMC_CAP_CMD23		(1 << 30)	/* CMD23 supported. */
-#define MMC_CAP_HW_RESET	(1 << 31)	/* Hardware reset */
-
-	unsigned int		caps2;		/* More host capabilities */
-
-#define MMC_CAP2_BOOTPART_NOACC	(1 << 0)	/* Boot partition no access */
-#define MMC_CAP2_CACHE_CTRL	(1 << 1)	/* Allow cache control */
-#define MMC_CAP2_POWEROFF_NOTIFY (1 << 2)	/* Notify poweroff supported */
-#define MMC_CAP2_NO_MULTI_READ	(1 << 3)	/* Multiblock reads don't work */
-#define MMC_CAP2_NO_SLEEP_CMD	(1 << 4)	/* Don't allow sleep command */
-#define MMC_CAP2_HS200_1_8V_SDR	(1 << 5)        /* can support */
-#define MMC_CAP2_HS200_1_2V_SDR	(1 << 6)        /* can support */
-#define MMC_CAP2_HS200		(MMC_CAP2_HS200_1_8V_SDR | \
-				 MMC_CAP2_HS200_1_2V_SDR)
-#define MMC_CAP2_BROKEN_VOLTAGE	(1 << 7)	/* Use the broken voltage */
-#define MMC_CAP2_DETECT_ON_ERR	(1 << 8)	/* On I/O err check card removal */
-#define MMC_CAP2_HC_ERASE_SZ	(1 << 9)	/* High-capacity erase size */
-
-	mmc_pm_flag_t		pm_caps;	/* supported pm features */
-	unsigned int        power_notify_type;
-#define MMC_HOST_PW_NOTIFY_NONE		0
-#define MMC_HOST_PW_NOTIFY_SHORT	1
-#define MMC_HOST_PW_NOTIFY_LONG		2
-
-#ifdef CONFIG_MMC_CLKGATE
-	int			clk_requests;	/* internal reference counter */
-	unsigned int		clk_delay;	/* number of MCI clk hold cycles */
-	bool			clk_gated;	/* clock gated */
-	struct delayed_work	clk_gate_work; /* delayed clock gate */
-	unsigned int		clk_old;	/* old clock value cache */
-	spinlock_t		clk_lock;	/* lock for clk fields */
-	struct mutex		clk_gate_mutex;	/* mutex for clock gating */
-	struct device_attribute clkgate_delay_attr;
-	unsigned long           clkgate_delay;
-#endif
-
-	/* host specific block data */
-	unsigned int		max_seg_size;	/* see blk_queue_max_segment_size */
-	unsigned short		max_segs;	/* see blk_queue_max_segments */
-	unsigned short		unused;
-	unsigned int		max_req_size;	/* maximum number of bytes in one req */
-	unsigned int		max_blk_size;	/* maximum size of one mmc block */
-	unsigned int		max_blk_count;	/* maximum number of blocks in one req */
-	unsigned int		max_discard_to;	/* max. discard timeout in ms */
-
-	/* private data */
-	spinlock_t		lock;		/* lock for claim and bus ops */
-
-	struct mmc_ios		ios;		/* current io bus settings */
-	u32			ocr;		/* the current OCR setting */
-
-	/* group bitfields together to minimize padding */
-	unsigned int		use_spi_crc:1;
-	unsigned int		claimed:1;	/* host exclusively claimed */
-	unsigned int		bus_dead:1;	/* bus has been released */
-#ifdef CONFIG_MMC_DEBUG
-	unsigned int		removed:1;	/* host is being removed */
-#endif
-
-	int			rescan_disable;	/* disable card detection */
-
-	struct mmc_card		*card;		/* device attached to this host */
-
-	wait_queue_head_t	wq;
-	struct task_struct	*claimer;	/* task that has host claimed */
-	int			claim_cnt;	/* "claim" nesting count */
-
-	struct delayed_work	detect;
-	struct wake_lock	detect_wake_lock;
-	int			detect_change;	/* card detect flag */
-	struct mmc_hotplug	hotplug;
-
-	const struct mmc_bus_ops *bus_ops;	/* current bus driver */
-	unsigned int		bus_refs;	/* reference counter */
-
-	unsigned int		bus_resume_flags;
-#define MMC_BUSRESUME_MANUAL_RESUME	(1 << 0)
-#define MMC_BUSRESUME_NEEDS_RESUME	(1 << 1)
-
-	unsigned int		sdio_irqs;
-	struct task_struct	*sdio_irq_thread;
-	bool			sdio_irq_pending;
-	atomic_t		sdio_irq_thread_abort;
-
-	mmc_pm_flag_t		pm_flags;	/* requested pm features */
-
-#ifdef CONFIG_LEDS_TRIGGERS
-	struct led_trigger	*led;		/* activity led */
-#endif
-
-#ifdef CONFIG_REGULATOR
-	bool			regulator_enabled; /* regulator state */
-#endif
-
-	struct dentry		*debugfs_root;
-
-	struct mmc_async_req	*areq;		/* active async req */
-
-#ifdef CONFIG_FAIL_MMC_REQUEST
-	struct fault_attr	fail_mmc_request;
-#endif
-
-	unsigned int		actual_clock;	/* Actual HC clock rate */
-
-#ifdef CONFIG_MMC_EMBEDDED_SDIO
-	struct {
-		struct sdio_cis			*cis;
-		struct sdio_cccr		*cccr;
-		struct sdio_embedded_func	*funcs;
-		int				num_funcs;
-	} embedded_sdio_data;
-#endif
-
-#ifdef CONFIG_MMC_UNSAFE_RESUME
-	/* Use to record if the card attath staus change in suspend mode*/
-	int card_attath_status;
-
-#define card_attach_status_change 1
-#define card_attach_status_unchange 0
-#endif
-	/*Use to enable scan retry when request or cmd fail*/
-	int scan_retry;
-	bool card_scan_status; /*use to record if the card scan have done and card init OK 0:fail 1:OK*/
-	struct semaphore req_sema; /*use to handle request asynchronous, to prevent issue command in the same time*/
-	int wmt_host_index; /*use to identify the host number*/
-
-	unsigned long		private[0] ____cacheline_aligned;
-};
-
-extern struct mmc_host *mmc_alloc_host(int extra, struct device *);
-extern int mmc_add_host(struct mmc_host *, bool);
-extern void mmc_remove_host(struct mmc_host *);
-extern void mmc_free_host(struct mmc_host *);
-
-#ifdef CONFIG_MMC_EMBEDDED_SDIO
-extern void mmc_set_embedded_sdio_data(struct mmc_host *host,
-				       struct sdio_cis *cis,
-				       struct sdio_cccr *cccr,
-				       struct sdio_embedded_func *funcs,
-				       int num_funcs);
-#endif
-
-static inline void *mmc_priv(struct mmc_host *host)
-{
-	return (void *)host->private;
-}
-
-#define mmc_host_is_spi(host)	((host)->caps & MMC_CAP_SPI)
-
-#define mmc_dev(x)	((x)->parent)
-#define mmc_classdev(x)	(&(x)->class_dev)
-#define mmc_hostname(x)	(dev_name(&(x)->class_dev))
-#define mmc_bus_needs_resume(host) ((host)->bus_resume_flags & MMC_BUSRESUME_NEEDS_RESUME)
-#define mmc_bus_manual_resume(host) ((host)->bus_resume_flags & MMC_BUSRESUME_MANUAL_RESUME)
-
-static inline void mmc_set_bus_resume_policy(struct mmc_host *host, int manual)
-{
-	if (manual)
-		host->bus_resume_flags |= MMC_BUSRESUME_MANUAL_RESUME;
-	else
-		host->bus_resume_flags &= ~MMC_BUSRESUME_MANUAL_RESUME;
-}
-
-extern int mmc_resume_bus(struct mmc_host *host);
-
-extern int mmc_suspend_host(struct mmc_host *);
-extern int mmc_resume_host(struct mmc_host *);
-
-extern int mmc_power_save_host(struct mmc_host *host);
-extern int mmc_power_restore_host(struct mmc_host *host);
-
-extern void mmc_detect_change(struct mmc_host *, unsigned long delay);
-extern void mmc_request_done(struct mmc_host *, struct mmc_request *);
-extern void mmc_force_remove_card(struct mmc_host *host);
-
-extern int mmc_cache_ctrl(struct mmc_host *, u8);
-
-static inline void mmc_signal_sdio_irq(struct mmc_host *host)
-{
-	host->ops->enable_sdio_irq(host, 0);
-	host->sdio_irq_pending = true;
-	wake_up_process(host->sdio_irq_thread);
-}
-
-struct regulator;
-
-#ifdef CONFIG_REGULATOR
-int mmc_regulator_get_ocrmask(struct regulator *supply);
-int mmc_regulator_set_ocr(struct mmc_host *mmc,
-			struct regulator *supply,
-			unsigned short vdd_bit);
-#else
-static inline int mmc_regulator_get_ocrmask(struct regulator *supply)
-{
-	return 0;
-}
-
-static inline int mmc_regulator_set_ocr(struct mmc_host *mmc,
-				 struct regulator *supply,
-				 unsigned short vdd_bit)
-{
-	return 0;
-}
-#endif
-
-int mmc_card_awake(struct mmc_host *host);
-int mmc_card_sleep(struct mmc_host *host);
-int mmc_card_can_sleep(struct mmc_host *host);
-
-int mmc_pm_notify(struct notifier_block *notify_block, unsigned long, void *);
-
-/* Module parameter */
-extern bool mmc_assume_removable;
-
-static inline int mmc_card_is_removable(struct mmc_host *host)
-{
-	return !(host->caps & MMC_CAP_NONREMOVABLE) && mmc_assume_removable;
-}
-
-static inline int mmc_card_keep_power(struct mmc_host *host)
-{
-	return host->pm_flags & MMC_PM_KEEP_POWER;
-}
-
-static inline int mmc_card_wake_sdio_irq(struct mmc_host *host)
-{
-	return host->pm_flags & MMC_PM_WAKE_SDIO_IRQ;
-}
-
-static inline int mmc_host_cmd23(struct mmc_host *host)
-{
-	return host->caps & MMC_CAP_CMD23;
-}
-
-static inline int mmc_boot_partition_access(struct mmc_host *host)
-{
-	return !(host->caps2 & MMC_CAP2_BOOTPART_NOACC);
-}
-
-#ifdef CONFIG_MMC_CLKGATE
-void mmc_host_clk_hold(struct mmc_host *host);
-void mmc_host_clk_release(struct mmc_host *host);
-unsigned int mmc_host_clk_rate(struct mmc_host *host);
-
-#else
-static inline void mmc_host_clk_hold(struct mmc_host *host)
-{
-}
-
-static inline void mmc_host_clk_release(struct mmc_host *host)
-{
-}
-
-static inline unsigned int mmc_host_clk_rate(struct mmc_host *host)
-{
-	return host->ios.clock;
-}
-#endif
-#endif /* LINUX_MMC_HOST_H */
diff --git a/ANDROID_3.4.5/include/linux/mmc/ioctl.h b/ANDROID_3.4.5/include/linux/mmc/ioctl.h
deleted file mode 100644
index 1f5e6892..00000000
--- a/ANDROID_3.4.5/include/linux/mmc/ioctl.h
+++ /dev/null
@@ -1,57 +0,0 @@
-#ifndef LINUX_MMC_IOCTL_H
-#define LINUX_MMC_IOCTL_H
-
-#include <linux/types.h>
-
-struct mmc_ioc_cmd {
-	/* Implies direction of data.  true = write, false = read */
-	int write_flag;
-
-	/* Application-specific command.  true = precede with CMD55 */
-	int is_acmd;
-
-	__u32 opcode;
-	__u32 arg;
-	__u32 response[4];  /* CMD response */
-	unsigned int flags;
-	unsigned int blksz;
-	unsigned int blocks;
-
-	/*
-	 * Sleep at least postsleep_min_us useconds, and at most
-	 * postsleep_max_us useconds *after* issuing command.  Needed for
-	 * some read commands for which cards have no other way of indicating
-	 * they're ready for the next command (i.e. there is no equivalent of
-	 * a "busy" indicator for read operations).
-	 */
-	unsigned int postsleep_min_us;
-	unsigned int postsleep_max_us;
-
-	/*
-	 * Override driver-computed timeouts.  Note the difference in units!
-	 */
-	unsigned int data_timeout_ns;
-	unsigned int cmd_timeout_ms;
-
-	/*
-	 * For 64-bit machines, the next member, ``__u64 data_ptr``, wants to
-	 * be 8-byte aligned.  Make sure this struct is the same size when
-	 * built for 32-bit.
-	 */
-	__u32 __pad;
-
-	/* DAT buffer */
-	__u64 data_ptr;
-};
-#define mmc_ioc_cmd_set_data(ic, ptr) ic.data_ptr = (__u64)(unsigned long) ptr
-
-#define MMC_IOC_CMD _IOWR(MMC_BLOCK_MAJOR, 0, struct mmc_ioc_cmd)
-
-/*
- * Since this ioctl is only meant to enhance (and not replace) normal access
- * to the mmc bus device, an upper data transfer limit of MMC_IOC_MAX_BYTES
- * is enforced per ioctl call.  For larger data transfers, use the normal
- * block device operations.
- */
-#define MMC_IOC_MAX_BYTES  (512L * 256)
-#endif /* LINUX_MMC_IOCTL_H */
diff --git a/ANDROID_3.4.5/include/linux/mmc/mmc.h b/ANDROID_3.4.5/include/linux/mmc/mmc.h
deleted file mode 100644
index b822a2cb..00000000
--- a/ANDROID_3.4.5/include/linux/mmc/mmc.h
+++ /dev/null
@@ -1,449 +0,0 @@
-/*
- * Header for MultiMediaCard (MMC)
- *
- * Copyright 2002 Hewlett-Packard Company
- *
- * Use consistent with the GNU GPL is permitted,
- * provided that this copyright notice is
- * preserved in its entirety in all copies and derived works.
- *
- * HEWLETT-PACKARD COMPANY MAKES NO WARRANTIES, EXPRESSED OR IMPLIED,
- * AS TO THE USEFULNESS OR CORRECTNESS OF THIS CODE OR ITS
- * FITNESS FOR ANY PARTICULAR PURPOSE.
- *
- * Many thanks to Alessandro Rubini and Jonathan Corbet!
- *
- * Based strongly on code by:
- *
- * Author: Yong-iL Joh <tolkien@mizi.com>
- *
- * Author:  Andrew Christian
- *          15 May 2002
- */
-
-#ifndef LINUX_MMC_MMC_H
-#define LINUX_MMC_MMC_H
-
-/* Standard MMC commands (4.1)           type  argument     response */
-   /* class 1 */
-#define MMC_GO_IDLE_STATE         0   /* bc                          */
-#define MMC_SEND_OP_COND          1   /* bcr  [31:0] OCR         R3  */
-#define MMC_ALL_SEND_CID          2   /* bcr                     R2  */
-#define MMC_SET_RELATIVE_ADDR     3   /* ac   [31:16] RCA        R1  */
-#define MMC_SET_DSR               4   /* bc   [31:16] RCA            */
-#define MMC_SLEEP_AWAKE		  5   /* ac   [31:16] RCA 15:flg R1b */
-#define MMC_SWITCH                6   /* ac   [31:0] See below   R1b */
-#define MMC_SELECT_CARD           7   /* ac   [31:16] RCA        R1  */
-#define MMC_SEND_EXT_CSD          8   /* adtc                    R1  */
-#define MMC_SEND_CSD              9   /* ac   [31:16] RCA        R2  */
-#define MMC_SEND_CID             10   /* ac   [31:16] RCA        R2  */
-#define MMC_READ_DAT_UNTIL_STOP  11   /* adtc [31:0] dadr        R1  */
-#define MMC_STOP_TRANSMISSION    12   /* ac                      R1b */
-#define MMC_SEND_STATUS          13   /* ac   [31:16] RCA        R1  */
-#define MMC_BUS_TEST_R           14   /* adtc                    R1  */
-#define MMC_GO_INACTIVE_STATE    15   /* ac   [31:16] RCA            */
-#define MMC_BUS_TEST_W           19   /* adtc                    R1  */
-#define MMC_SPI_READ_OCR         58   /* spi                  spi_R3 */
-#define MMC_SPI_CRC_ON_OFF       59   /* spi  [0:0] flag      spi_R1 */
-
-  /* class 2 */
-#define MMC_SET_BLOCKLEN         16   /* ac   [31:0] block len   R1  */
-#define MMC_READ_SINGLE_BLOCK    17   /* adtc [31:0] data addr   R1  */
-#define MMC_READ_MULTIPLE_BLOCK  18   /* adtc [31:0] data addr   R1  */
-#define MMC_SEND_TUNING_BLOCK    19   /* adtc                    R1  */
-#define MMC_SEND_TUNING_BLOCK_HS200	21	/* adtc R1  */
-
-  /* class 3 */
-#define MMC_WRITE_DAT_UNTIL_STOP 20   /* adtc [31:0] data addr   R1  */
-
-  /* class 4 */
-#define MMC_SET_BLOCK_COUNT      23   /* adtc [31:0] data addr   R1  */
-#define MMC_WRITE_BLOCK          24   /* adtc [31:0] data addr   R1  */
-#define MMC_WRITE_MULTIPLE_BLOCK 25   /* adtc                    R1  */
-#define MMC_PROGRAM_CID          26   /* adtc                    R1  */
-#define MMC_PROGRAM_CSD          27   /* adtc                    R1  */
-
-  /* class 6 */
-#define MMC_SET_WRITE_PROT       28   /* ac   [31:0] data addr   R1b */
-#define MMC_CLR_WRITE_PROT       29   /* ac   [31:0] data addr   R1b */
-#define MMC_SEND_WRITE_PROT      30   /* adtc [31:0] wpdata addr R1  */
-
-  /* class 5 */
-#define MMC_ERASE_GROUP_START    35   /* ac   [31:0] data addr   R1  */
-#define MMC_ERASE_GROUP_END      36   /* ac   [31:0] data addr   R1  */
-#define MMC_ERASE                38   /* ac                      R1b */
-
-  /* class 9 */
-#define MMC_FAST_IO              39   /* ac   <Complex>          R4  */
-#define MMC_GO_IRQ_STATE         40   /* bcr                     R5  */
-
-  /* class 7 */
-#define MMC_LOCK_UNLOCK          42   /* adtc                    R1b */
-
-  /* class 8 */
-#define MMC_APP_CMD              55   /* ac   [31:16] RCA        R1  */
-#define MMC_GEN_CMD              56   /* adtc [0] RD/WR          R1  */
-
-static inline bool mmc_op_multi(u32 opcode)
-{
-	return opcode == MMC_WRITE_MULTIPLE_BLOCK ||
-	       opcode == MMC_READ_MULTIPLE_BLOCK;
-}
-
-/*
- * MMC_SWITCH argument format:
- *
- *	[31:26] Always 0
- *	[25:24] Access Mode
- *	[23:16] Location of target Byte in EXT_CSD
- *	[15:08] Value Byte
- *	[07:03] Always 0
- *	[02:00] Command Set
- */
-
-/*
-  MMC status in R1, for native mode (SPI bits are different)
-  Type
-	e : error bit
-	s : status bit
-	r : detected and set for the actual command response
-	x : detected and set during command execution. the host must poll
-            the card by sending status command in order to read these bits.
-  Clear condition
-	a : according to the card state
-	b : always related to the previous command. Reception of
-            a valid command will clear it (with a delay of one command)
-	c : clear by read
- */
-
-#define R1_OUT_OF_RANGE		(1 << 31)	/* er, c */
-#define R1_ADDRESS_ERROR	(1 << 30)	/* erx, c */
-#define R1_BLOCK_LEN_ERROR	(1 << 29)	/* er, c */
-#define R1_ERASE_SEQ_ERROR      (1 << 28)	/* er, c */
-#define R1_ERASE_PARAM		(1 << 27)	/* ex, c */
-#define R1_WP_VIOLATION		(1 << 26)	/* erx, c */
-#define R1_CARD_IS_LOCKED	(1 << 25)	/* sx, a */
-#define R1_LOCK_UNLOCK_FAILED	(1 << 24)	/* erx, c */
-#define R1_COM_CRC_ERROR	(1 << 23)	/* er, b */
-#define R1_ILLEGAL_COMMAND	(1 << 22)	/* er, b */
-#define R1_CARD_ECC_FAILED	(1 << 21)	/* ex, c */
-#define R1_CC_ERROR		(1 << 20)	/* erx, c */
-#define R1_ERROR		(1 << 19)	/* erx, c */
-#define R1_UNDERRUN		(1 << 18)	/* ex, c */
-#define R1_OVERRUN		(1 << 17)	/* ex, c */
-#define R1_CID_CSD_OVERWRITE	(1 << 16)	/* erx, c, CID/CSD overwrite */
-#define R1_WP_ERASE_SKIP	(1 << 15)	/* sx, c */
-#define R1_CARD_ECC_DISABLED	(1 << 14)	/* sx, a */
-#define R1_ERASE_RESET		(1 << 13)	/* sr, c */
-#define R1_STATUS(x)            (x & 0xFFFFE000)
-#define R1_CURRENT_STATE(x)	((x & 0x00001E00) >> 9)	/* sx, b (4 bits) */
-#define R1_READY_FOR_DATA	(1 << 8)	/* sx, a */
-#define R1_SWITCH_ERROR		(1 << 7)	/* sx, c */
-#define R1_APP_CMD		(1 << 5)	/* sr, c */
-
-#define R1_STATE_IDLE	0
-#define R1_STATE_READY	1
-#define R1_STATE_IDENT	2
-#define R1_STATE_STBY	3
-#define R1_STATE_TRAN	4
-#define R1_STATE_DATA	5
-#define R1_STATE_RCV	6
-#define R1_STATE_PRG	7
-#define R1_STATE_DIS	8
-
-/*
- * MMC/SD in SPI mode reports R1 status always, and R2 for SEND_STATUS
- * R1 is the low order byte; R2 is the next highest byte, when present.
- */
-#define R1_SPI_IDLE		(1 << 0)
-#define R1_SPI_ERASE_RESET	(1 << 1)
-#define R1_SPI_ILLEGAL_COMMAND	(1 << 2)
-#define R1_SPI_COM_CRC		(1 << 3)
-#define R1_SPI_ERASE_SEQ	(1 << 4)
-#define R1_SPI_ADDRESS		(1 << 5)
-#define R1_SPI_PARAMETER	(1 << 6)
-/* R1 bit 7 is always zero */
-#define R2_SPI_CARD_LOCKED	(1 << 8)
-#define R2_SPI_WP_ERASE_SKIP	(1 << 9)	/* or lock/unlock fail */
-#define R2_SPI_LOCK_UNLOCK_FAIL	R2_SPI_WP_ERASE_SKIP
-#define R2_SPI_ERROR		(1 << 10)
-#define R2_SPI_CC_ERROR		(1 << 11)
-#define R2_SPI_CARD_ECC_ERROR	(1 << 12)
-#define R2_SPI_WP_VIOLATION	(1 << 13)
-#define R2_SPI_ERASE_PARAM	(1 << 14)
-#define R2_SPI_OUT_OF_RANGE	(1 << 15)	/* or CSD overwrite */
-#define R2_SPI_CSD_OVERWRITE	R2_SPI_OUT_OF_RANGE
-
-/* These are unpacked versions of the actual responses */
-
-struct _mmc_csd {
-	u8  csd_structure;
-	u8  spec_vers;
-	u8  taac;
-	u8  nsac;
-	u8  tran_speed;
-	u16 ccc;
-	u8  read_bl_len;
-	u8  read_bl_partial;
-	u8  write_blk_misalign;
-	u8  read_blk_misalign;
-	u8  dsr_imp;
-	u16 c_size;
-	u8  vdd_r_curr_min;
-	u8  vdd_r_curr_max;
-	u8  vdd_w_curr_min;
-	u8  vdd_w_curr_max;
-	u8  c_size_mult;
-	union {
-		struct { /* MMC system specification version 3.1 */
-			u8  erase_grp_size;
-			u8  erase_grp_mult;
-		} v31;
-		struct { /* MMC system specification version 2.2 */
-			u8  sector_size;
-			u8  erase_grp_size;
-		} v22;
-	} erase;
-	u8  wp_grp_size;
-	u8  wp_grp_enable;
-	u8  default_ecc;
-	u8  r2w_factor;
-	u8  write_bl_len;
-	u8  write_bl_partial;
-	u8  file_format_grp;
-	u8  copy;
-	u8  perm_write_protect;
-	u8  tmp_write_protect;
-	u8  file_format;
-	u8  ecc;
-};
-
-/*
- * OCR bits are mostly in host.h
- */
-#define MMC_CARD_BUSY	0x80000000	/* Card Power up status bit */
-
-/*
- * Card Command Classes (CCC)
- */
-#define CCC_BASIC		(1<<0)	/* (0) Basic protocol functions */
-					/* (CMD0,1,2,3,4,7,9,10,12,13,15) */
-					/* (and for SPI, CMD58,59) */
-#define CCC_STREAM_READ		(1<<1)	/* (1) Stream read commands */
-					/* (CMD11) */
-#define CCC_BLOCK_READ		(1<<2)	/* (2) Block read commands */
-					/* (CMD16,17,18) */
-#define CCC_STREAM_WRITE	(1<<3)	/* (3) Stream write commands */
-					/* (CMD20) */
-#define CCC_BLOCK_WRITE		(1<<4)	/* (4) Block write commands */
-					/* (CMD16,24,25,26,27) */
-#define CCC_ERASE		(1<<5)	/* (5) Ability to erase blocks */
-					/* (CMD32,33,34,35,36,37,38,39) */
-#define CCC_WRITE_PROT		(1<<6)	/* (6) Able to write protect blocks */
-					/* (CMD28,29,30) */
-#define CCC_LOCK_CARD		(1<<7)	/* (7) Able to lock down card */
-					/* (CMD16,CMD42) */
-#define CCC_APP_SPEC		(1<<8)	/* (8) Application specific */
-					/* (CMD55,56,57,ACMD*) */
-#define CCC_IO_MODE		(1<<9)	/* (9) I/O mode */
-					/* (CMD5,39,40,52,53) */
-#define CCC_SWITCH		(1<<10)	/* (10) High speed switch */
-					/* (CMD6,34,35,36,37,50) */
-					/* (11) Reserved */
-					/* (CMD?) */
-
-/*
- * CSD field definitions
- */
-
-#define CSD_STRUCT_VER_1_0  0           /* Valid for system specification 1.0 - 1.2 */
-#define CSD_STRUCT_VER_1_1  1           /* Valid for system specification 1.4 - 2.2 */
-#define CSD_STRUCT_VER_1_2  2           /* Valid for system specification 3.1 - 3.2 - 3.31 - 4.0 - 4.1 */
-#define CSD_STRUCT_EXT_CSD  3           /* Version is coded in CSD_STRUCTURE in EXT_CSD */
-
-#define CSD_SPEC_VER_0      0           /* Implements system specification 1.0 - 1.2 */
-#define CSD_SPEC_VER_1      1           /* Implements system specification 1.4 */
-#define CSD_SPEC_VER_2      2           /* Implements system specification 2.0 - 2.2 */
-#define CSD_SPEC_VER_3      3           /* Implements system specification 3.1 - 3.2 - 3.31 */
-#define CSD_SPEC_VER_4      4           /* Implements system specification 4.0 - 4.1 */
-
-/*
- * EXT_CSD fields
- */
-
-#define EXT_CSD_FLUSH_CACHE		32      /* W */
-#define EXT_CSD_CACHE_CTRL		33      /* R/W */
-#define EXT_CSD_POWER_OFF_NOTIFICATION	34	/* R/W */
-#define EXT_CSD_DATA_SECTOR_SIZE	61	/* R */
-#define EXT_CSD_GP_SIZE_MULT		143	/* R/W */
-#define EXT_CSD_PARTITION_ATTRIBUTE	156	/* R/W */
-#define EXT_CSD_PARTITION_SUPPORT	160	/* RO */
-#define EXT_CSD_HPI_MGMT		161	/* R/W */
-#define EXT_CSD_RST_N_FUNCTION		162	/* R/W */
-#define EXT_CSD_SANITIZE_START		165     /* W */
-#define EXT_CSD_WR_REL_PARAM		166	/* RO */
-#define EXT_CSD_BOOT_WP			173	/* R/W */
-#define EXT_CSD_ERASE_GROUP_DEF		175	/* R/W */
-#define EXT_CSD_PART_CONFIG		179	/* R/W */
-#define EXT_CSD_ERASED_MEM_CONT		181	/* RO */
-#define EXT_CSD_BUS_WIDTH		183	/* R/W */
-#define EXT_CSD_HS_TIMING		185	/* R/W */
-#define EXT_CSD_POWER_CLASS		187	/* R/W */
-#define EXT_CSD_REV			192	/* RO */
-#define EXT_CSD_STRUCTURE		194	/* RO */
-#define EXT_CSD_CARD_TYPE		196	/* RO */
-#define EXT_CSD_OUT_OF_INTERRUPT_TIME	198	/* RO */
-#define EXT_CSD_PART_SWITCH_TIME        199     /* RO */
-#define EXT_CSD_PWR_CL_52_195		200	/* RO */
-#define EXT_CSD_PWR_CL_26_195		201	/* RO */
-#define EXT_CSD_PWR_CL_52_360		202	/* RO */
-#define EXT_CSD_PWR_CL_26_360		203	/* RO */
-#define EXT_CSD_SEC_CNT			212	/* RO, 4 bytes */
-#define EXT_CSD_S_A_TIMEOUT		217	/* RO */
-#define EXT_CSD_REL_WR_SEC_C		222	/* RO */
-#define EXT_CSD_HC_WP_GRP_SIZE		221	/* RO */
-#define EXT_CSD_ERASE_TIMEOUT_MULT	223	/* RO */
-#define EXT_CSD_HC_ERASE_GRP_SIZE	224	/* RO */
-#define EXT_CSD_BOOT_MULT		226	/* RO */
-#define EXT_CSD_SEC_TRIM_MULT		229	/* RO */
-#define EXT_CSD_SEC_ERASE_MULT		230	/* RO */
-#define EXT_CSD_SEC_FEATURE_SUPPORT	231	/* RO */
-#define EXT_CSD_TRIM_MULT		232	/* RO */
-#define EXT_CSD_PWR_CL_200_195		236	/* RO */
-#define EXT_CSD_PWR_CL_200_360		237	/* RO */
-#define EXT_CSD_PWR_CL_DDR_52_195	238	/* RO */
-#define EXT_CSD_PWR_CL_DDR_52_360	239	/* RO */
-#define EXT_CSD_POWER_OFF_LONG_TIME	247	/* RO */
-#define EXT_CSD_GENERIC_CMD6_TIME	248	/* RO */
-#define EXT_CSD_CACHE_SIZE		249	/* RO, 4 bytes */
-#define EXT_CSD_TAG_UNIT_SIZE		498	/* RO */
-#define EXT_CSD_DATA_TAG_SUPPORT	499	/* RO */
-#define EXT_CSD_HPI_FEATURES		503	/* RO */
-
-/*
- * EXT_CSD field definitions
- */
-
-#define EXT_CSD_WR_REL_PARAM_EN		(1<<2)
-
-#define EXT_CSD_BOOT_WP_B_PWR_WP_DIS	(0x40)
-#define EXT_CSD_BOOT_WP_B_PERM_WP_DIS	(0x10)
-#define EXT_CSD_BOOT_WP_B_PERM_WP_EN	(0x04)
-#define EXT_CSD_BOOT_WP_B_PWR_WP_EN	(0x01)
-
-#define EXT_CSD_PART_CONFIG_ACC_MASK	(0x7)
-#define EXT_CSD_PART_CONFIG_ACC_BOOT0	(0x1)
-#define EXT_CSD_PART_CONFIG_ACC_GP0	(0x4)
-
-#define EXT_CSD_PART_SUPPORT_PART_EN	(0x1)
-
-#define EXT_CSD_CMD_SET_NORMAL		(1<<0)
-#define EXT_CSD_CMD_SET_SECURE		(1<<1)
-#define EXT_CSD_CMD_SET_CPSECURE	(1<<2)
-
-#define EXT_CSD_CARD_TYPE_26	(1<<0)	/* Card can run at 26MHz */
-#define EXT_CSD_CARD_TYPE_52	(1<<1)	/* Card can run at 52MHz */
-#define EXT_CSD_CARD_TYPE_MASK	0x3F	/* Mask out reserved bits */
-#define EXT_CSD_CARD_TYPE_DDR_1_8V  (1<<2)   /* Card can run at 52MHz */
-					     /* DDR mode @1.8V or 3V I/O */
-#define EXT_CSD_CARD_TYPE_DDR_1_2V  (1<<3)   /* Card can run at 52MHz */
-					     /* DDR mode @1.2V I/O */
-#define EXT_CSD_CARD_TYPE_DDR_52       (EXT_CSD_CARD_TYPE_DDR_1_8V  \
-					| EXT_CSD_CARD_TYPE_DDR_1_2V)
-#define EXT_CSD_CARD_TYPE_SDR_1_8V	(1<<4)	/* Card can run at 200MHz */
-#define EXT_CSD_CARD_TYPE_SDR_1_2V	(1<<5)	/* Card can run at 200MHz */
-						/* SDR mode @1.2V I/O */
-
-#define EXT_CSD_CARD_TYPE_SDR_200	(EXT_CSD_CARD_TYPE_SDR_1_8V | \
-					 EXT_CSD_CARD_TYPE_SDR_1_2V)
-
-#define EXT_CSD_CARD_TYPE_SDR_ALL	(EXT_CSD_CARD_TYPE_SDR_200 | \
-					 EXT_CSD_CARD_TYPE_52 | \
-					 EXT_CSD_CARD_TYPE_26)
-
-#define	EXT_CSD_CARD_TYPE_SDR_1_2V_ALL	(EXT_CSD_CARD_TYPE_SDR_1_2V | \
-					 EXT_CSD_CARD_TYPE_52 | \
-					 EXT_CSD_CARD_TYPE_26)
-
-#define	EXT_CSD_CARD_TYPE_SDR_1_8V_ALL	(EXT_CSD_CARD_TYPE_SDR_1_8V | \
-					 EXT_CSD_CARD_TYPE_52 | \
-					 EXT_CSD_CARD_TYPE_26)
-
-#define EXT_CSD_CARD_TYPE_SDR_1_2V_DDR_1_8V	(EXT_CSD_CARD_TYPE_SDR_1_2V | \
-						 EXT_CSD_CARD_TYPE_DDR_1_8V | \
-						 EXT_CSD_CARD_TYPE_52 | \
-						 EXT_CSD_CARD_TYPE_26)
-
-#define EXT_CSD_CARD_TYPE_SDR_1_8V_DDR_1_8V	(EXT_CSD_CARD_TYPE_SDR_1_8V | \
-						 EXT_CSD_CARD_TYPE_DDR_1_8V | \
-						 EXT_CSD_CARD_TYPE_52 | \
-						 EXT_CSD_CARD_TYPE_26)
-
-#define EXT_CSD_CARD_TYPE_SDR_1_2V_DDR_1_2V	(EXT_CSD_CARD_TYPE_SDR_1_2V | \
-						 EXT_CSD_CARD_TYPE_DDR_1_2V | \
-						 EXT_CSD_CARD_TYPE_52 | \
-						 EXT_CSD_CARD_TYPE_26)
-
-#define EXT_CSD_CARD_TYPE_SDR_1_8V_DDR_1_2V	(EXT_CSD_CARD_TYPE_SDR_1_8V | \
-						 EXT_CSD_CARD_TYPE_DDR_1_2V | \
-						 EXT_CSD_CARD_TYPE_52 | \
-						 EXT_CSD_CARD_TYPE_26)
-
-#define EXT_CSD_CARD_TYPE_SDR_1_2V_DDR_52	(EXT_CSD_CARD_TYPE_SDR_1_2V | \
-						 EXT_CSD_CARD_TYPE_DDR_52 | \
-						 EXT_CSD_CARD_TYPE_52 | \
-						 EXT_CSD_CARD_TYPE_26)
-
-#define EXT_CSD_CARD_TYPE_SDR_1_8V_DDR_52	(EXT_CSD_CARD_TYPE_SDR_1_8V | \
-						 EXT_CSD_CARD_TYPE_DDR_52 | \
-						 EXT_CSD_CARD_TYPE_52 | \
-						 EXT_CSD_CARD_TYPE_26)
-
-#define EXT_CSD_CARD_TYPE_SDR_ALL_DDR_1_8V	(EXT_CSD_CARD_TYPE_SDR_200 | \
-						 EXT_CSD_CARD_TYPE_DDR_1_8V | \
-						 EXT_CSD_CARD_TYPE_52 | \
-						 EXT_CSD_CARD_TYPE_26)
-
-#define EXT_CSD_CARD_TYPE_SDR_ALL_DDR_1_2V	(EXT_CSD_CARD_TYPE_SDR_200 | \
-						 EXT_CSD_CARD_TYPE_DDR_1_2V | \
-						 EXT_CSD_CARD_TYPE_52 | \
-						 EXT_CSD_CARD_TYPE_26)
-
-#define EXT_CSD_CARD_TYPE_SDR_ALL_DDR_52	(EXT_CSD_CARD_TYPE_SDR_200 | \
-						 EXT_CSD_CARD_TYPE_DDR_52 | \
-						 EXT_CSD_CARD_TYPE_52 | \
-						 EXT_CSD_CARD_TYPE_26)
-
-#define EXT_CSD_BUS_WIDTH_1	0	/* Card is in 1 bit mode */
-#define EXT_CSD_BUS_WIDTH_4	1	/* Card is in 4 bit mode */
-#define EXT_CSD_BUS_WIDTH_8	2	/* Card is in 8 bit mode */
-#define EXT_CSD_DDR_BUS_WIDTH_4	5	/* Card is in 4 bit DDR mode */
-#define EXT_CSD_DDR_BUS_WIDTH_8	6	/* Card is in 8 bit DDR mode */
-
-#define EXT_CSD_SEC_ER_EN	BIT(0)
-#define EXT_CSD_SEC_BD_BLK_EN	BIT(2)
-#define EXT_CSD_SEC_GB_CL_EN	BIT(4)
-#define EXT_CSD_SEC_SANITIZE	BIT(6)  /* v4.5 only */
-
-#define EXT_CSD_RST_N_EN_MASK	0x3
-#define EXT_CSD_RST_N_ENABLED	1	/* RST_n is enabled on card */
-
-#define EXT_CSD_NO_POWER_NOTIFICATION	0
-#define EXT_CSD_POWER_ON		1
-#define EXT_CSD_POWER_OFF_SHORT		2
-#define EXT_CSD_POWER_OFF_LONG		3
-
-#define EXT_CSD_PWR_CL_8BIT_MASK	0xF0	/* 8 bit PWR CLS */
-#define EXT_CSD_PWR_CL_4BIT_MASK	0x0F	/* 8 bit PWR CLS */
-#define EXT_CSD_PWR_CL_8BIT_SHIFT	4
-#define EXT_CSD_PWR_CL_4BIT_SHIFT	0
-/*
- * MMC_SWITCH access modes
- */
-
-#define MMC_SWITCH_MODE_CMD_SET		0x00	/* Change the command set */
-#define MMC_SWITCH_MODE_SET_BITS	0x01	/* Set bits which are 1 in value */
-#define MMC_SWITCH_MODE_CLEAR_BITS	0x02	/* Clear bits which are 1 in value */
-#define MMC_SWITCH_MODE_WRITE_BYTE	0x03	/* Set target to value */
-
-#endif /* LINUX_MMC_MMC_H */
diff --git a/ANDROID_3.4.5/include/linux/mmc/pm.h b/ANDROID_3.4.5/include/linux/mmc/pm.h
deleted file mode 100644
index 6e2d6a13..00000000
--- a/ANDROID_3.4.5/include/linux/mmc/pm.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/*
- * linux/include/linux/mmc/pm.h
- *
- * Author:	Nicolas Pitre
- * Copyright:	(C) 2009 Marvell Technology Group Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef LINUX_MMC_PM_H
-#define LINUX_MMC_PM_H
-
-/*
- * These flags are used to describe power management features that
- * some cards (typically SDIO cards) might wish to benefit from when
- * the host system is being suspended.  There are several layers of
- * abstractions involved, from the host controller driver, to the MMC core
- * code, to the SDIO core code, to finally get to the actual SDIO function
- * driver.  This file is therefore used for common definitions shared across
- * all those layers.
- */
-
-typedef unsigned int mmc_pm_flag_t;
-
-#define MMC_PM_KEEP_POWER	(1 << 0)	/* preserve card power during suspend */
-#define MMC_PM_WAKE_SDIO_IRQ	(1 << 1)	/* wake up host system on SDIO IRQ assertion */
-#define MMC_PM_IGNORE_PM_NOTIFY	(1 << 2)	/* ignore mmc pm notify */
-
-#endif /* LINUX_MMC_PM_H */
diff --git a/ANDROID_3.4.5/include/linux/mmc/sd.h b/ANDROID_3.4.5/include/linux/mmc/sd.h
deleted file mode 100644
index 1ebcf9ba..00000000
--- a/ANDROID_3.4.5/include/linux/mmc/sd.h
+++ /dev/null
@@ -1,94 +0,0 @@
-/*
- *  include/linux/mmc/sd.h
- *
- *  Copyright (C) 2005-2007 Pierre Ossman, All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or (at
- * your option) any later version.
- */
-
-#ifndef LINUX_MMC_SD_H
-#define LINUX_MMC_SD_H
-
-/* SD commands                           type  argument     response */
-  /* class 0 */
-/* This is basically the same command as for MMC with some quirks. */
-#define SD_SEND_RELATIVE_ADDR     3   /* bcr                     R6  */
-#define SD_SEND_IF_COND           8   /* bcr  [11:0] See below   R7  */
-#define SD_SWITCH_VOLTAGE         11  /* ac                      R1  */
-
-  /* class 10 */
-#define SD_SWITCH                 6   /* adtc [31:0] See below   R1  */
-
-  /* class 5 */
-#define SD_ERASE_WR_BLK_START    32   /* ac   [31:0] data addr   R1  */
-#define SD_ERASE_WR_BLK_END      33   /* ac   [31:0] data addr   R1  */
-
-  /* Application commands */
-#define SD_APP_SET_BUS_WIDTH      6   /* ac   [1:0] bus width    R1  */
-#define SD_APP_SD_STATUS         13   /* adtc                    R1  */
-#define SD_APP_SEND_NUM_WR_BLKS  22   /* adtc                    R1  */
-#define SD_APP_OP_COND           41   /* bcr  [31:0] OCR         R3  */
-#define SD_APP_SEND_SCR          51   /* adtc                    R1  */
-
-/* OCR bit definitions */
-#define SD_OCR_S18R		(1 << 24)    /* 1.8V switching request */
-#define SD_ROCR_S18A		SD_OCR_S18R  /* 1.8V switching accepted by card */
-#define SD_OCR_XPC		(1 << 28)    /* SDXC power control */
-#define SD_OCR_CCS		(1 << 30)    /* Card Capacity Status */
-
-/*
- * SD_SWITCH argument format:
- *
- *      [31] Check (0) or switch (1)
- *      [30:24] Reserved (0)
- *      [23:20] Function group 6
- *      [19:16] Function group 5
- *      [15:12] Function group 4
- *      [11:8] Function group 3
- *      [7:4] Function group 2
- *      [3:0] Function group 1
- */
-
-/*
- * SD_SEND_IF_COND argument format:
- *
- *	[31:12] Reserved (0)
- *	[11:8] Host Voltage Supply Flags
- *	[7:0] Check Pattern (0xAA)
- */
-
-/*
- * SCR field definitions
- */
-
-#define SCR_SPEC_VER_0		0	/* Implements system specification 1.0 - 1.01 */
-#define SCR_SPEC_VER_1		1	/* Implements system specification 1.10 */
-#define SCR_SPEC_VER_2		2	/* Implements system specification 2.00-3.0X */
-
-/*
- * SD bus widths
- */
-#define SD_BUS_WIDTH_1		0
-#define SD_BUS_WIDTH_4		2
-
-/*
- * SD_SWITCH mode
- */
-#define SD_SWITCH_CHECK		0
-#define SD_SWITCH_SET		1
-
-/*
- * SD_SWITCH function groups
- */
-#define SD_SWITCH_GRP_ACCESS	0
-
-/*
- * SD_SWITCH access modes
- */
-#define SD_SWITCH_ACCESS_DEF	0
-#define SD_SWITCH_ACCESS_HS	1
-
-#endif /* LINUX_MMC_SD_H */
diff --git a/ANDROID_3.4.5/include/linux/mmc/sdhci-pci-data.h b/ANDROID_3.4.5/include/linux/mmc/sdhci-pci-data.h
deleted file mode 100644
index 8959604a..00000000
--- a/ANDROID_3.4.5/include/linux/mmc/sdhci-pci-data.h
+++ /dev/null
@@ -1,18 +0,0 @@
-#ifndef LINUX_MMC_SDHCI_PCI_DATA_H
-#define LINUX_MMC_SDHCI_PCI_DATA_H
-
-struct pci_dev;
-
-struct sdhci_pci_data {
-	struct pci_dev	*pdev;
-	int		slotno;
-	int		rst_n_gpio; /* Set to -EINVAL if unused */
-	int		cd_gpio;    /* Set to -EINVAL if unused */
-	int		(*setup)(struct sdhci_pci_data *data);
-	void		(*cleanup)(struct sdhci_pci_data *data);
-};
-
-extern struct sdhci_pci_data *(*sdhci_pci_get_data)(struct pci_dev *pdev,
-				int slotno);
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/mmc/sdhci-spear.h b/ANDROID_3.4.5/include/linux/mmc/sdhci-spear.h
deleted file mode 100644
index 5cdc96da..00000000
--- a/ANDROID_3.4.5/include/linux/mmc/sdhci-spear.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * include/linux/mmc/sdhci-spear.h
- *
- * SDHCI declarations specific to ST SPEAr platform
- *
- * Copyright (C) 2010 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef LINUX_MMC_SDHCI_SPEAR_H
-#define LINUX_MMC_SDHCI_SPEAR_H
-
-#include <linux/platform_device.h>
-/*
- * struct sdhci_plat_data: spear sdhci platform data structure
- *
- * @card_power_gpio: gpio pin for enabling/disabling power to sdhci socket
- * @power_active_high: if set, enable power to sdhci socket by setting
- *			card_power_gpio
- * @power_always_enb: If set, then enable power on probe, otherwise enable only
- *			on card insertion and disable on card removal.
- * card_int_gpio: gpio pin used for card detection
- */
-struct sdhci_plat_data {
-	int card_power_gpio;
-	int power_active_high;
-	int power_always_enb;
-	int card_int_gpio;
-};
-
-/* This function is used to set platform_data field of pdev->dev */
-static inline void
-sdhci_set_plat_data(struct platform_device *pdev, struct sdhci_plat_data *data)
-{
-	pdev->dev.platform_data = data;
-}
-
-#endif /* LINUX_MMC_SDHCI_SPEAR_H */
diff --git a/ANDROID_3.4.5/include/linux/mmc/sdhci.h b/ANDROID_3.4.5/include/linux/mmc/sdhci.h
deleted file mode 100644
index e9051e1c..00000000
--- a/ANDROID_3.4.5/include/linux/mmc/sdhci.h
+++ /dev/null
@@ -1,174 +0,0 @@
-/*
- *  linux/include/linux/mmc/sdhci.h - Secure Digital Host Controller Interface
- *
- *  Copyright (C) 2005-2008 Pierre Ossman, All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or (at
- * your option) any later version.
- */
-#ifndef LINUX_MMC_SDHCI_H
-#define LINUX_MMC_SDHCI_H
-
-#include <linux/scatterlist.h>
-#include <linux/compiler.h>
-#include <linux/types.h>
-#include <linux/io.h>
-#include <linux/mmc/host.h>
-
-struct sdhci_host {
-	/* Data set by hardware interface driver */
-	const char *hw_name;	/* Hardware bus name */
-
-	unsigned int quirks;	/* Deviations from spec. */
-
-/* Controller doesn't honor resets unless we touch the clock register */
-#define SDHCI_QUIRK_CLOCK_BEFORE_RESET			(1<<0)
-/* Controller has bad caps bits, but really supports DMA */
-#define SDHCI_QUIRK_FORCE_DMA				(1<<1)
-/* Controller doesn't like to be reset when there is no card inserted. */
-#define SDHCI_QUIRK_NO_CARD_NO_RESET			(1<<2)
-/* Controller doesn't like clearing the power reg before a change */
-#define SDHCI_QUIRK_SINGLE_POWER_WRITE			(1<<3)
-/* Controller has flaky internal state so reset it on each ios change */
-#define SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS		(1<<4)
-/* Controller has an unusable DMA engine */
-#define SDHCI_QUIRK_BROKEN_DMA				(1<<5)
-/* Controller has an unusable ADMA engine */
-#define SDHCI_QUIRK_BROKEN_ADMA				(1<<6)
-/* Controller can only DMA from 32-bit aligned addresses */
-#define SDHCI_QUIRK_32BIT_DMA_ADDR			(1<<7)
-/* Controller can only DMA chunk sizes that are a multiple of 32 bits */
-#define SDHCI_QUIRK_32BIT_DMA_SIZE			(1<<8)
-/* Controller can only ADMA chunks that are a multiple of 32 bits */
-#define SDHCI_QUIRK_32BIT_ADMA_SIZE			(1<<9)
-/* Controller needs to be reset after each request to stay stable */
-#define SDHCI_QUIRK_RESET_AFTER_REQUEST			(1<<10)
-/* Controller needs voltage and power writes to happen separately */
-#define SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER		(1<<11)
-/* Controller provides an incorrect timeout value for transfers */
-#define SDHCI_QUIRK_BROKEN_TIMEOUT_VAL			(1<<12)
-/* Controller has an issue with buffer bits for small transfers */
-#define SDHCI_QUIRK_BROKEN_SMALL_PIO			(1<<13)
-/* Controller does not provide transfer-complete interrupt when not busy */
-#define SDHCI_QUIRK_NO_BUSY_IRQ				(1<<14)
-/* Controller has unreliable card detection */
-#define SDHCI_QUIRK_BROKEN_CARD_DETECTION		(1<<15)
-/* Controller reports inverted write-protect state */
-#define SDHCI_QUIRK_INVERTED_WRITE_PROTECT		(1<<16)
-/* Controller has nonstandard clock management */
-#define SDHCI_QUIRK_NONSTANDARD_CLOCK			(1<<17)
-/* Controller does not like fast PIO transfers */
-#define SDHCI_QUIRK_PIO_NEEDS_DELAY			(1<<18)
-/* Controller losing signal/interrupt enable states after reset */
-#define SDHCI_QUIRK_RESTORE_IRQS_AFTER_RESET		(1<<19)
-/* Controller has to be forced to use block size of 2048 bytes */
-#define SDHCI_QUIRK_FORCE_BLK_SZ_2048			(1<<20)
-/* Controller cannot do multi-block transfers */
-#define SDHCI_QUIRK_NO_MULTIBLOCK			(1<<21)
-/* Controller can only handle 1-bit data transfers */
-#define SDHCI_QUIRK_FORCE_1_BIT_DATA			(1<<22)
-/* Controller needs 10ms delay between applying power and clock */
-#define SDHCI_QUIRK_DELAY_AFTER_POWER			(1<<23)
-/* Controller uses SDCLK instead of TMCLK for data timeouts */
-#define SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK		(1<<24)
-/* Controller reports wrong base clock capability */
-#define SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN		(1<<25)
-/* Controller cannot support End Attribute in NOP ADMA descriptor */
-#define SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC		(1<<26)
-/* Controller is missing device caps. Use caps provided by host */
-#define SDHCI_QUIRK_MISSING_CAPS			(1<<27)
-/* Controller uses Auto CMD12 command to stop the transfer */
-#define SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12		(1<<28)
-/* Controller doesn't have HISPD bit field in HI-SPEED SD card */
-#define SDHCI_QUIRK_NO_HISPD_BIT			(1<<29)
-/* Controller treats ADMA descriptors with length 0000h incorrectly */
-#define SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC		(1<<30)
-/* The read-only detection via SDHCI_PRESENT_STATE register is unstable */
-#define SDHCI_QUIRK_UNSTABLE_RO_DETECT			(1<<31)
-
-	unsigned int quirks2;	/* More deviations from spec. */
-
-#define SDHCI_QUIRK2_HOST_OFF_CARD_ON			(1<<0)
-
-	int irq;		/* Device IRQ */
-	void __iomem *ioaddr;	/* Mapped address */
-
-	const struct sdhci_ops *ops;	/* Low level hw interface */
-
-	struct regulator *vmmc;	/* Power regulator */
-
-	/* Internal data */
-	struct mmc_host *mmc;	/* MMC structure */
-	u64 dma_mask;		/* custom DMA mask */
-
-#if defined(CONFIG_LEDS_CLASS) || defined(CONFIG_LEDS_CLASS_MODULE)
-	struct led_classdev led;	/* LED control */
-	char led_name[32];
-#endif
-
-	spinlock_t lock;	/* Mutex */
-
-	int flags;		/* Host attributes */
-#define SDHCI_USE_SDMA		(1<<0)	/* Host is SDMA capable */
-#define SDHCI_USE_ADMA		(1<<1)	/* Host is ADMA capable */
-#define SDHCI_REQ_USE_DMA	(1<<2)	/* Use DMA for this req. */
-#define SDHCI_DEVICE_DEAD	(1<<3)	/* Device unresponsive */
-#define SDHCI_SDR50_NEEDS_TUNING (1<<4)	/* SDR50 needs tuning */
-#define SDHCI_NEEDS_RETUNING	(1<<5)	/* Host needs retuning */
-#define SDHCI_AUTO_CMD12	(1<<6)	/* Auto CMD12 support */
-#define SDHCI_AUTO_CMD23	(1<<7)	/* Auto CMD23 support */
-#define SDHCI_PV_ENABLED	(1<<8)	/* Preset value enabled */
-#define SDHCI_SDIO_IRQ_ENABLED	(1<<9)	/* SDIO irq enabled */
-#define SDHCI_HS200_NEEDS_TUNING (1<<10)	/* HS200 needs tuning */
-
-	unsigned int version;	/* SDHCI spec. version */
-
-	unsigned int max_clk;	/* Max possible freq (MHz) */
-	unsigned int timeout_clk;	/* Timeout freq (KHz) */
-	unsigned int clk_mul;	/* Clock Muliplier value */
-
-	unsigned int clock;	/* Current clock (MHz) */
-	u8 pwr;			/* Current voltage */
-
-	bool runtime_suspended;	/* Host is runtime suspended */
-
-	struct mmc_request *mrq;	/* Current request */
-	struct mmc_command *cmd;	/* Current command */
-	struct mmc_data *data;	/* Current data request */
-	unsigned int data_early:1;	/* Data finished before cmd */
-
-	struct sg_mapping_iter sg_miter;	/* SG state for PIO */
-	unsigned int blocks;	/* remaining PIO blocks */
-
-	int sg_count;		/* Mapped sg entries */
-
-	u8 *adma_desc;		/* ADMA descriptor table */
-	u8 *align_buffer;	/* Bounce buffer */
-
-	dma_addr_t adma_addr;	/* Mapped ADMA descr. table */
-	dma_addr_t align_addr;	/* Mapped bounce buffer */
-
-	struct tasklet_struct card_tasklet;	/* Tasklet structures */
-	struct tasklet_struct finish_tasklet;
-
-	struct timer_list timer;	/* Timer for timeouts */
-
-	unsigned int caps;	/* Alternative capabilities */
-
-	unsigned int            ocr_avail_sdio;	/* OCR bit masks */
-	unsigned int            ocr_avail_sd;
-	unsigned int            ocr_avail_mmc;
-
-	wait_queue_head_t	buf_ready_int;	/* Waitqueue for Buffer Read Ready interrupt */
-	unsigned int		tuning_done;	/* Condition flag set when CMD19 succeeds */
-
-	unsigned int		tuning_count;	/* Timer count for re-tuning */
-	unsigned int		tuning_mode;	/* Re-tuning mode supported by host */
-#define SDHCI_TUNING_MODE_1	0
-	struct timer_list	tuning_timer;	/* Timer for tuning */
-
-	unsigned long private[0] ____cacheline_aligned;
-};
-#endif /* LINUX_MMC_SDHCI_H */
diff --git a/ANDROID_3.4.5/include/linux/mmc/sdio.h b/ANDROID_3.4.5/include/linux/mmc/sdio.h
deleted file mode 100644
index c9fe66c5..00000000
--- a/ANDROID_3.4.5/include/linux/mmc/sdio.h
+++ /dev/null
@@ -1,191 +0,0 @@
-/*
- *  include/linux/mmc/sdio.h
- *
- *  Copyright 2006-2007 Pierre Ossman
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or (at
- * your option) any later version.
- */
-
-#ifndef LINUX_MMC_SDIO_H
-#define LINUX_MMC_SDIO_H
-
-/* SDIO commands                         type  argument     response */
-#define SD_IO_SEND_OP_COND          5 /* bcr  [23:0] OCR         R4  */
-#define SD_IO_RW_DIRECT            52 /* ac   [31:0] See below   R5  */
-#define SD_IO_RW_EXTENDED          53 /* adtc [31:0] See below   R5  */
-
-/*
- * SD_IO_RW_DIRECT argument format:
- *
- *      [31] R/W flag
- *      [30:28] Function number
- *      [27] RAW flag
- *      [25:9] Register address
- *      [7:0] Data
- */
-
-/*
- * SD_IO_RW_EXTENDED argument format:
- *
- *      [31] R/W flag
- *      [30:28] Function number
- *      [27] Block mode
- *      [26] Increment address
- *      [25:9] Register address
- *      [8:0] Byte/block count
- */
-
-#define R4_18V_PRESENT (1<<24)
-#define R4_MEMORY_PRESENT (1 << 27)
-
-/*
-  SDIO status in R5
-  Type
-	e : error bit
-	s : status bit
-	r : detected and set for the actual command response
-	x : detected and set during command execution. the host must poll
-            the card by sending status command in order to read these bits.
-  Clear condition
-	a : according to the card state
-	b : always related to the previous command. Reception of
-            a valid command will clear it (with a delay of one command)
-	c : clear by read
- */
-
-#define R5_COM_CRC_ERROR	(1 << 15)	/* er, b */
-#define R5_ILLEGAL_COMMAND	(1 << 14)	/* er, b */
-#define R5_ERROR		(1 << 11)	/* erx, c */
-#define R5_FUNCTION_NUMBER	(1 << 9)	/* er, c */
-#define R5_OUT_OF_RANGE		(1 << 8)	/* er, c */
-#define R5_STATUS(x)		(x & 0xCB00)
-#define R5_IO_CURRENT_STATE(x)	((x & 0x3000) >> 12) /* s, b */
-
-/*
- * Card Common Control Registers (CCCR)
- */
-
-#define SDIO_CCCR_CCCR		0x00
-
-#define  SDIO_CCCR_REV_1_00	0	/* CCCR/FBR Version 1.00 */
-#define  SDIO_CCCR_REV_1_10	1	/* CCCR/FBR Version 1.10 */
-#define  SDIO_CCCR_REV_1_20	2	/* CCCR/FBR Version 1.20 */
-#define  SDIO_CCCR_REV_3_00	3	/* CCCR/FBR Version 3.00 */
-
-#define  SDIO_SDIO_REV_1_00	0	/* SDIO Spec Version 1.00 */
-#define  SDIO_SDIO_REV_1_10	1	/* SDIO Spec Version 1.10 */
-#define  SDIO_SDIO_REV_1_20	2	/* SDIO Spec Version 1.20 */
-#define  SDIO_SDIO_REV_2_00	3	/* SDIO Spec Version 2.00 */
-#define  SDIO_SDIO_REV_3_00	4	/* SDIO Spec Version 3.00 */
-
-#define SDIO_CCCR_SD		0x01
-
-#define  SDIO_SD_REV_1_01	0	/* SD Physical Spec Version 1.01 */
-#define  SDIO_SD_REV_1_10	1	/* SD Physical Spec Version 1.10 */
-#define  SDIO_SD_REV_2_00	2	/* SD Physical Spec Version 2.00 */
-#define  SDIO_SD_REV_3_00	3	/* SD Physical Spev Version 3.00 */
-
-#define SDIO_CCCR_IOEx		0x02
-#define SDIO_CCCR_IORx		0x03
-
-#define SDIO_CCCR_IENx		0x04	/* Function/Master Interrupt Enable */
-#define SDIO_CCCR_INTx		0x05	/* Function Interrupt Pending */
-
-#define SDIO_CCCR_ABORT		0x06	/* function abort/card reset */
-
-#define SDIO_CCCR_IF		0x07	/* bus interface controls */
-
-#define  SDIO_BUS_WIDTH_1BIT	0x00
-#define  SDIO_BUS_WIDTH_4BIT	0x02
-#define  SDIO_BUS_ECSI		0x20	/* Enable continuous SPI interrupt */
-#define  SDIO_BUS_SCSI		0x40	/* Support continuous SPI interrupt */
-
-#define  SDIO_BUS_ASYNC_INT	0x20
-
-#define  SDIO_BUS_CD_DISABLE     0x80	/* disable pull-up on DAT3 (pin 1) */
-
-#define SDIO_CCCR_CAPS		0x08
-
-#define  SDIO_CCCR_CAP_SDC	0x01	/* can do CMD52 while data transfer */
-#define  SDIO_CCCR_CAP_SMB	0x02	/* can do multi-block xfers (CMD53) */
-#define  SDIO_CCCR_CAP_SRW	0x04	/* supports read-wait protocol */
-#define  SDIO_CCCR_CAP_SBS	0x08	/* supports suspend/resume */
-#define  SDIO_CCCR_CAP_S4MI	0x10	/* interrupt during 4-bit CMD53 */
-#define  SDIO_CCCR_CAP_E4MI	0x20	/* enable ints during 4-bit CMD53 */
-#define  SDIO_CCCR_CAP_LSC	0x40	/* low speed card */
-#define  SDIO_CCCR_CAP_4BLS	0x80	/* 4 bit low speed card */
-
-#define SDIO_CCCR_CIS		0x09	/* common CIS pointer (3 bytes) */
-
-/* Following 4 regs are valid only if SBS is set */
-#define SDIO_CCCR_SUSPEND	0x0c
-#define SDIO_CCCR_SELx		0x0d
-#define SDIO_CCCR_EXECx		0x0e
-#define SDIO_CCCR_READYx	0x0f
-
-#define SDIO_CCCR_BLKSIZE	0x10
-
-#define SDIO_CCCR_POWER		0x12
-
-#define  SDIO_POWER_SMPC	0x01	/* Supports Master Power Control */
-#define  SDIO_POWER_EMPC	0x02	/* Enable Master Power Control */
-
-#define SDIO_CCCR_SPEED		0x13
-
-#define  SDIO_SPEED_SHS		0x01	/* Supports High-Speed mode */
-#define  SDIO_SPEED_BSS_SHIFT	1
-#define  SDIO_SPEED_BSS_MASK	(7<<SDIO_SPEED_BSS_SHIFT)
-#define  SDIO_SPEED_SDR12	(0<<SDIO_SPEED_BSS_SHIFT)
-#define  SDIO_SPEED_SDR25	(1<<SDIO_SPEED_BSS_SHIFT)
-#define  SDIO_SPEED_SDR50	(2<<SDIO_SPEED_BSS_SHIFT)
-#define  SDIO_SPEED_SDR104	(3<<SDIO_SPEED_BSS_SHIFT)
-#define  SDIO_SPEED_DDR50	(4<<SDIO_SPEED_BSS_SHIFT)
-#define  SDIO_SPEED_EHS		SDIO_SPEED_SDR25	/* Enable High-Speed */
-
-#define SDIO_CCCR_UHS		0x14
-#define  SDIO_UHS_SDR50		0x01
-#define  SDIO_UHS_SDR104	0x02
-#define  SDIO_UHS_DDR50		0x04
-
-#define SDIO_CCCR_DRIVE_STRENGTH 0x15
-#define  SDIO_SDTx_MASK		0x07
-#define  SDIO_DRIVE_SDTA	(1<<0)
-#define  SDIO_DRIVE_SDTC	(1<<1)
-#define  SDIO_DRIVE_SDTD	(1<<2)
-#define  SDIO_DRIVE_DTSx_MASK	0x03
-#define  SDIO_DRIVE_DTSx_SHIFT	4
-#define  SDIO_DTSx_SET_TYPE_B	(0 << SDIO_DRIVE_DTSx_SHIFT)
-#define  SDIO_DTSx_SET_TYPE_A	(1 << SDIO_DRIVE_DTSx_SHIFT)
-#define  SDIO_DTSx_SET_TYPE_C	(2 << SDIO_DRIVE_DTSx_SHIFT)
-#define  SDIO_DTSx_SET_TYPE_D	(3 << SDIO_DRIVE_DTSx_SHIFT)
-/*
- * Function Basic Registers (FBR)
- */
-
-#define SDIO_FBR_BASE(f)	((f) * 0x100) /* base of function f's FBRs */
-
-#define SDIO_FBR_STD_IF		0x00
-
-#define  SDIO_FBR_SUPPORTS_CSA	0x40	/* supports Code Storage Area */
-#define  SDIO_FBR_ENABLE_CSA	0x80	/* enable Code Storage Area */
-
-#define SDIO_FBR_STD_IF_EXT	0x01
-
-#define SDIO_FBR_POWER		0x02
-
-#define  SDIO_FBR_POWER_SPS	0x01	/* Supports Power Selection */
-#define  SDIO_FBR_POWER_EPS	0x02	/* Enable (low) Power Selection */
-
-#define SDIO_FBR_CIS		0x09	/* CIS pointer (3 bytes) */
-
-
-#define SDIO_FBR_CSA		0x0C	/* CSA pointer (3 bytes) */
-
-#define SDIO_FBR_CSA_DATA	0x0F
-
-#define SDIO_FBR_BLKSIZE	0x10	/* block size (2 bytes) */
-
-#endif /* LINUX_MMC_SDIO_H */
diff --git a/ANDROID_3.4.5/include/linux/mmc/sdio_func.h b/ANDROID_3.4.5/include/linux/mmc/sdio_func.h
deleted file mode 100755
index dc680c4b..00000000
--- a/ANDROID_3.4.5/include/linux/mmc/sdio_func.h
+++ /dev/null
@@ -1,174 +0,0 @@
-/*
- *  include/linux/mmc/sdio_func.h
- *
- *  Copyright 2007-2008 Pierre Ossman
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or (at
- * your option) any later version.
- */
-
-#ifndef LINUX_MMC_SDIO_FUNC_H
-#define LINUX_MMC_SDIO_FUNC_H
-
-#include <linux/device.h>
-#include <linux/mod_devicetable.h>
-
-#include <linux/mmc/pm.h>
-
-struct mmc_card;
-struct sdio_func;
-
-typedef void (sdio_irq_handler_t)(struct sdio_func *);
-
-/*
- * Structure used to hold embedded SDIO device data from platform layer
- */
-struct sdio_embedded_func {
-	uint8_t f_class;
-	uint32_t f_maxblksize;
-};
-
-/*
- * SDIO function CIS tuple (unknown to the core)
- */
-struct sdio_func_tuple {
-	struct sdio_func_tuple *next;
-	unsigned char code;
-	unsigned char size;
-	unsigned char data[0];
-};
-
-/*
- * SDIO function devices
- */
-struct sdio_func {
-	struct mmc_card		*card;		/* the card this device belongs to */
-	struct device		dev;		/* the device */
-	sdio_irq_handler_t	*irq_handler;	/* IRQ callback */
-	unsigned int		num;		/* function number */
-
-	unsigned char		class;		/* standard interface class */
-	unsigned short		vendor;		/* vendor id */
-	unsigned short		device;		/* device id */
-
-	unsigned		max_blksize;	/* maximum block size */
-	unsigned		cur_blksize;	/* current block size */
-
-	unsigned		enable_timeout;	/* max enable timeout in msec */
-
-	unsigned int		state;		/* function state */
-#define SDIO_STATE_PRESENT	(1<<0)		/* present in sysfs */
-
-	u8			tmpbuf[4];	/* DMA:able scratch buffer */
-
-	unsigned		num_info;	/* number of info strings */
-	const char		**info;		/* info strings */
-
-	struct sdio_func_tuple *tuples;
-};
-
-#define sdio_func_present(f)	((f)->state & SDIO_STATE_PRESENT)
-
-#define sdio_func_set_present(f) ((f)->state |= SDIO_STATE_PRESENT)
-
-#define sdio_func_id(f)		(dev_name(&(f)->dev))
-
-#define sdio_get_drvdata(f)	dev_get_drvdata(&(f)->dev)
-#define sdio_set_drvdata(f,d)	dev_set_drvdata(&(f)->dev, d)
-#define dev_to_sdio_func(d)	container_of(d, struct sdio_func, dev)
-
-/*
- * SDIO function device driver
- */
-struct sdio_driver {
-	char *name;
-	const struct sdio_device_id *id_table;
-
-	int (*probe)(struct sdio_func *, const struct sdio_device_id *);
-	void (*remove)(struct sdio_func *);
-
-	struct device_driver drv;
-};
-
-#define to_sdio_driver(d)	container_of(d, struct sdio_driver, drv)
-
-/**
- * SDIO_DEVICE - macro used to describe a specific SDIO device
- * @vend: the 16 bit manufacturer code
- * @dev: the 16 bit function id
- *
- * This macro is used to create a struct sdio_device_id that matches a
- * specific device. The class field will be set to SDIO_ANY_ID.
- */
-#define SDIO_DEVICE(vend,dev) \
-	.class = SDIO_ANY_ID, \
-	.vendor = (vend), .device = (dev)
-
-/**
- * SDIO_DEVICE_CLASS - macro used to describe a specific SDIO device class
- * @dev_class: the 8 bit standard interface code
- *
- * This macro is used to create a struct sdio_device_id that matches a
- * specific standard SDIO function type.  The vendor and device fields will
- * be set to SDIO_ANY_ID.
- */
-#define SDIO_DEVICE_CLASS(dev_class) \
-	.class = (dev_class), \
-	.vendor = SDIO_ANY_ID, .device = SDIO_ANY_ID
-
-extern int sdio_register_driver(struct sdio_driver *);
-extern void sdio_unregister_driver(struct sdio_driver *);
-
-/*
- * SDIO I/O operations
- */
-extern void sdio_claim_host(struct sdio_func *func);
-extern void sdio_release_host(struct sdio_func *func);
-
-extern int sdio_enable_func(struct sdio_func *func);
-extern int sdio_disable_func(struct sdio_func *func);
-
-extern int sdio_set_block_size(struct sdio_func *func, unsigned blksz);
-
-extern int sdio_claim_irq(struct sdio_func *func, sdio_irq_handler_t *handler);
-extern int sdio_release_irq(struct sdio_func *func);
-
-extern unsigned int sdio_align_size(struct sdio_func *func, unsigned int sz);
-
-extern u8 sdio_readb(struct sdio_func *func, unsigned int addr, int *err_ret);
-extern u8 sdio_readb_ext(struct sdio_func *func, unsigned int addr, int *err_ret,
-	unsigned in);
-extern u16 sdio_readw(struct sdio_func *func, unsigned int addr, int *err_ret);
-extern u32 sdio_readl(struct sdio_func *func, unsigned int addr, int *err_ret);
-
-extern int sdio_memcpy_fromio(struct sdio_func *func, void *dst,
-	unsigned int addr, int count);
-extern int sdio_readsb(struct sdio_func *func, void *dst,
-	unsigned int addr, int count);
-
-extern void sdio_writeb(struct sdio_func *func, u8 b,
-	unsigned int addr, int *err_ret);
-extern void sdio_writew(struct sdio_func *func, u16 b,
-	unsigned int addr, int *err_ret);
-extern void sdio_writel(struct sdio_func *func, u32 b,
-	unsigned int addr, int *err_ret);
-
-extern u8 sdio_writeb_readb(struct sdio_func *func, u8 write_byte,
-	unsigned int addr, int *err_ret);
-
-extern int sdio_memcpy_toio(struct sdio_func *func, unsigned int addr,
-	void *src, int count);
-extern int sdio_writesb(struct sdio_func *func, unsigned int addr,
-	void *src, int count);
-
-extern unsigned char sdio_f0_readb(struct sdio_func *func,
-	unsigned int addr, int *err_ret);
-extern void sdio_f0_writeb(struct sdio_func *func, unsigned char b,
-	unsigned int addr, int *err_ret);
-
-extern mmc_pm_flag_t sdio_get_host_pm_caps(struct sdio_func *func);
-extern int sdio_set_host_pm_flags(struct sdio_func *func, mmc_pm_flag_t flags);
-
-#endif /* LINUX_MMC_SDIO_FUNC_H */
diff --git a/ANDROID_3.4.5/include/linux/mmc/sdio_ids.h b/ANDROID_3.4.5/include/linux/mmc/sdio_ids.h
deleted file mode 100644
index 9f03feed..00000000
--- a/ANDROID_3.4.5/include/linux/mmc/sdio_ids.h
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- * SDIO Classes, Interface Types, Manufacturer IDs, etc.
- */
-
-#ifndef LINUX_MMC_SDIO_IDS_H
-#define LINUX_MMC_SDIO_IDS_H
-
-/*
- * Standard SDIO Function Interfaces
- */
-
-#define SDIO_CLASS_NONE		0x00	/* Not a SDIO standard interface */
-#define SDIO_CLASS_UART		0x01	/* standard UART interface */
-#define SDIO_CLASS_BT_A		0x02	/* Type-A BlueTooth std interface */
-#define SDIO_CLASS_BT_B		0x03	/* Type-B BlueTooth std interface */
-#define SDIO_CLASS_GPS		0x04	/* GPS standard interface */
-#define SDIO_CLASS_CAMERA	0x05	/* Camera standard interface */
-#define SDIO_CLASS_PHS		0x06	/* PHS standard interface */
-#define SDIO_CLASS_WLAN		0x07	/* WLAN interface */
-#define SDIO_CLASS_ATA		0x08	/* Embedded SDIO-ATA std interface */
-#define SDIO_CLASS_BT_AMP	0x09	/* Type-A Bluetooth AMP interface */
-
-/*
- * Vendors and devices.  Sort key: vendor first, device next.
- */
-#define SDIO_VENDOR_ID_INTEL			0x0089
-#define SDIO_DEVICE_ID_INTEL_IWMC3200WIMAX	0x1402
-#define SDIO_DEVICE_ID_INTEL_IWMC3200WIFI	0x1403
-#define SDIO_DEVICE_ID_INTEL_IWMC3200TOP	0x1404
-#define SDIO_DEVICE_ID_INTEL_IWMC3200GPS	0x1405
-#define SDIO_DEVICE_ID_INTEL_IWMC3200BT		0x1406
-#define SDIO_DEVICE_ID_INTEL_IWMC3200WIMAX_2G5	0x1407
-
-#define SDIO_VENDOR_ID_MARVELL			0x02df
-#define SDIO_DEVICE_ID_MARVELL_LIBERTAS		0x9103
-#define SDIO_DEVICE_ID_MARVELL_8688WLAN		0x9104
-#define SDIO_DEVICE_ID_MARVELL_8688BT		0x9105
-
-#define SDIO_VENDOR_ID_SIANO			0x039a
-#define SDIO_DEVICE_ID_SIANO_NOVA_B0		0x0201
-#define SDIO_DEVICE_ID_SIANO_NICE		0x0202
-#define SDIO_DEVICE_ID_SIANO_VEGA_A0		0x0300
-#define SDIO_DEVICE_ID_SIANO_VENICE		0x0301
-#define SDIO_DEVICE_ID_SIANO_NOVA_A0		0x1100
-#define SDIO_DEVICE_ID_SIANO_STELLAR 		0x5347
-
-#endif /* LINUX_MMC_SDIO_IDS_H */
diff --git a/ANDROID_3.4.5/include/linux/mmc/sh_mmcif.h b/ANDROID_3.4.5/include/linux/mmc/sh_mmcif.h
deleted file mode 100644
index 05f0e3db..00000000
--- a/ANDROID_3.4.5/include/linux/mmc/sh_mmcif.h
+++ /dev/null
@@ -1,222 +0,0 @@
-/*
- * include/linux/mmc/sh_mmcif.h
- *
- * platform data for eMMC driver
- *
- * Copyright (C) 2010 Renesas Solutions Corp.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License.
- *
- */
-
-#ifndef LINUX_MMC_SH_MMCIF_H
-#define LINUX_MMC_SH_MMCIF_H
-
-#include <linux/io.h>
-#include <linux/platform_device.h>
-#include <linux/sh_dma.h>
-
-/*
- * MMCIF : CE_CLK_CTRL [19:16]
- * 1000 : Peripheral clock / 512
- * 0111 : Peripheral clock / 256
- * 0110 : Peripheral clock / 128
- * 0101 : Peripheral clock / 64
- * 0100 : Peripheral clock / 32
- * 0011 : Peripheral clock / 16
- * 0010 : Peripheral clock / 8
- * 0001 : Peripheral clock / 4
- * 0000 : Peripheral clock / 2
- * 1111 : Peripheral clock (sup_pclk set '1')
- */
-
-struct sh_mmcif_dma {
-	struct sh_dmae_slave chan_priv_tx;
-	struct sh_dmae_slave chan_priv_rx;
-};
-
-struct sh_mmcif_plat_data {
-	void (*set_pwr)(struct platform_device *pdev, int state);
-	void (*down_pwr)(struct platform_device *pdev);
-	int (*get_cd)(struct platform_device *pdef);
-	struct sh_mmcif_dma	*dma;		/* Deprecated. Instead */
-	unsigned int		slave_id_tx;	/* use embedded slave_id_[tr]x */
-	unsigned int		slave_id_rx;
-	u8			sup_pclk;	/* 1 :SH7757, 0: SH7724/SH7372 */
-	unsigned long		caps;
-	u32			ocr;
-};
-
-#define MMCIF_CE_CMD_SET	0x00000000
-#define MMCIF_CE_ARG		0x00000008
-#define MMCIF_CE_ARG_CMD12	0x0000000C
-#define MMCIF_CE_CMD_CTRL	0x00000010
-#define MMCIF_CE_BLOCK_SET	0x00000014
-#define MMCIF_CE_CLK_CTRL	0x00000018
-#define MMCIF_CE_BUF_ACC	0x0000001C
-#define MMCIF_CE_RESP3		0x00000020
-#define MMCIF_CE_RESP2		0x00000024
-#define MMCIF_CE_RESP1		0x00000028
-#define MMCIF_CE_RESP0		0x0000002C
-#define MMCIF_CE_RESP_CMD12	0x00000030
-#define MMCIF_CE_DATA		0x00000034
-#define MMCIF_CE_INT		0x00000040
-#define MMCIF_CE_INT_MASK	0x00000044
-#define MMCIF_CE_HOST_STS1	0x00000048
-#define MMCIF_CE_HOST_STS2	0x0000004C
-#define MMCIF_CE_VERSION	0x0000007C
-
-/* CE_BUF_ACC */
-#define BUF_ACC_DMAWEN		(1 << 25)
-#define BUF_ACC_DMAREN		(1 << 24)
-#define BUF_ACC_BUSW_32		(0 << 17)
-#define BUF_ACC_BUSW_16		(1 << 17)
-#define BUF_ACC_ATYP		(1 << 16)
-
-/* CE_CLK_CTRL */
-#define CLK_ENABLE		(1 << 24) /* 1: output mmc clock */
-#define CLK_CLEAR		(0xf << 16)
-#define CLK_SUP_PCLK		(0xf << 16)
-#define CLKDIV_4		(1 << 16) /* mmc clock frequency.
-					   * n: bus clock/(2^(n+1)) */
-#define CLKDIV_256		(7 << 16) /* mmc clock frequency. (see above) */
-#define SRSPTO_256		(2 << 12) /* resp timeout */
-#define SRBSYTO_29		(0xf << 8) /* resp busy timeout */
-#define SRWDTO_29		(0xf << 4) /* read/write timeout */
-#define SCCSTO_29		(0xf << 0) /* ccs timeout */
-
-/* CE_VERSION */
-#define SOFT_RST_ON		(1 << 31)
-#define SOFT_RST_OFF		0
-
-static inline u32 sh_mmcif_readl(void __iomem *addr, int reg)
-{
-	return __raw_readl(addr + reg);
-}
-
-static inline void sh_mmcif_writel(void __iomem *addr, int reg, u32 val)
-{
-	__raw_writel(val, addr + reg);
-}
-
-#define SH_MMCIF_BBS 512 /* boot block size */
-
-static inline void sh_mmcif_boot_cmd_send(void __iomem *base,
-					  unsigned long cmd, unsigned long arg)
-{
-	sh_mmcif_writel(base, MMCIF_CE_INT, 0);
-	sh_mmcif_writel(base, MMCIF_CE_ARG, arg);
-	sh_mmcif_writel(base, MMCIF_CE_CMD_SET, cmd);
-}
-
-static inline int sh_mmcif_boot_cmd_poll(void __iomem *base, unsigned long mask)
-{
-	unsigned long tmp;
-	int cnt;
-
-	for (cnt = 0; cnt < 1000000; cnt++) {
-		tmp = sh_mmcif_readl(base, MMCIF_CE_INT);
-		if (tmp & mask) {
-			sh_mmcif_writel(base, MMCIF_CE_INT, tmp & ~mask);
-			return 0;
-		}
-	}
-
-	return -1;
-}
-
-static inline int sh_mmcif_boot_cmd(void __iomem *base,
-				    unsigned long cmd, unsigned long arg)
-{
-	sh_mmcif_boot_cmd_send(base, cmd, arg);
-	return sh_mmcif_boot_cmd_poll(base, 0x00010000);
-}
-
-static inline int sh_mmcif_boot_do_read_single(void __iomem *base,
-					       unsigned int block_nr,
-					       unsigned long *buf)
-{
-	int k;
-
-	/* CMD13 - Status */
-	sh_mmcif_boot_cmd(base, 0x0d400000, 0x00010000);
-
-	if (sh_mmcif_readl(base, MMCIF_CE_RESP0) != 0x0900)
-		return -1;
-
-	/* CMD17 - Read */
-	sh_mmcif_boot_cmd(base, 0x11480000, block_nr * SH_MMCIF_BBS);
-	if (sh_mmcif_boot_cmd_poll(base, 0x00100000) < 0)
-		return -1;
-
-	for (k = 0; k < (SH_MMCIF_BBS / 4); k++)
-		buf[k] = sh_mmcif_readl(base, MMCIF_CE_DATA);
-
-	return 0;
-}
-
-static inline int sh_mmcif_boot_do_read(void __iomem *base,
-					unsigned long first_block,
-					unsigned long nr_blocks,
-					void *buf)
-{
-	unsigned long k;
-	int ret = 0;
-
-	/* In data transfer mode: Set clock to Bus clock/4 (about 20Mhz) */
-	sh_mmcif_writel(base, MMCIF_CE_CLK_CTRL,
-			CLK_ENABLE | CLKDIV_4 | SRSPTO_256 |
-			SRBSYTO_29 | SRWDTO_29 | SCCSTO_29);
-
-	/* CMD9 - Get CSD */
-	sh_mmcif_boot_cmd(base, 0x09806000, 0x00010000);
-
-	/* CMD7 - Select the card */
-	sh_mmcif_boot_cmd(base, 0x07400000, 0x00010000);
-
-	/* CMD16 - Set the block size */
-	sh_mmcif_boot_cmd(base, 0x10400000, SH_MMCIF_BBS);
-
-	for (k = 0; !ret && k < nr_blocks; k++)
-		ret = sh_mmcif_boot_do_read_single(base, first_block + k,
-						   buf + (k * SH_MMCIF_BBS));
-
-	return ret;
-}
-
-static inline void sh_mmcif_boot_init(void __iomem *base)
-{
-	/* reset */
-	sh_mmcif_writel(base, MMCIF_CE_VERSION, SOFT_RST_ON);
-	sh_mmcif_writel(base, MMCIF_CE_VERSION, SOFT_RST_OFF);
-
-	/* byte swap */
-	sh_mmcif_writel(base, MMCIF_CE_BUF_ACC, BUF_ACC_ATYP);
-
-	/* Set block size in MMCIF hardware */
-	sh_mmcif_writel(base, MMCIF_CE_BLOCK_SET, SH_MMCIF_BBS);
-
-	/* Enable the clock, set it to Bus clock/256 (about 325Khz). */
-	sh_mmcif_writel(base, MMCIF_CE_CLK_CTRL,
-			CLK_ENABLE | CLKDIV_256 | SRSPTO_256 |
-			SRBSYTO_29 | SRWDTO_29 | SCCSTO_29);
-
-	/* CMD0 */
-	sh_mmcif_boot_cmd(base, 0x00000040, 0);
-
-	/* CMD1 - Get OCR */
-	do {
-		sh_mmcif_boot_cmd(base, 0x01405040, 0x40300000); /* CMD1 */
-	} while ((sh_mmcif_readl(base, MMCIF_CE_RESP0) & 0x80000000)
-		 != 0x80000000);
-
-	/* CMD2 - Get CID */
-	sh_mmcif_boot_cmd(base, 0x02806040, 0);
-
-	/* CMD3 - Set card relative address */
-	sh_mmcif_boot_cmd(base, 0x03400040, 0x00010000);
-}
-
-#endif /* LINUX_MMC_SH_MMCIF_H */
diff --git a/ANDROID_3.4.5/include/linux/mmc/sh_mobile_sdhi.h b/ANDROID_3.4.5/include/linux/mmc/sh_mobile_sdhi.h
deleted file mode 100644
index e94e620a..00000000
--- a/ANDROID_3.4.5/include/linux/mmc/sh_mobile_sdhi.h
+++ /dev/null
@@ -1,38 +0,0 @@
-#ifndef LINUX_MMC_SH_MOBILE_SDHI_H
-#define LINUX_MMC_SH_MOBILE_SDHI_H
-
-#include <linux/types.h>
-
-struct platform_device;
-struct tmio_mmc_data;
-
-#define SH_MOBILE_SDHI_IRQ_CARD_DETECT	"card_detect"
-#define SH_MOBILE_SDHI_IRQ_SDCARD	"sdcard"
-#define SH_MOBILE_SDHI_IRQ_SDIO		"sdio"
-
-/**
- * struct sh_mobile_sdhi_ops - SDHI driver callbacks
- * @cd_wakeup:		trigger a card-detection run
- */
-struct sh_mobile_sdhi_ops {
-	void (*cd_wakeup)(const struct platform_device *pdev);
-};
-
-struct sh_mobile_sdhi_info {
-	int dma_slave_tx;
-	int dma_slave_rx;
-	unsigned long tmio_flags;
-	unsigned long tmio_caps;
-	u32 tmio_ocr_mask;	/* available MMC voltages */
-	unsigned int cd_gpio;
-	struct tmio_mmc_data *pdata;
-	void (*set_pwr)(struct platform_device *pdev, int state);
-	int (*get_cd)(struct platform_device *pdev);
-
-	/* callbacks for board specific setup code */
-	int (*init)(struct platform_device *pdev,
-		    const struct sh_mobile_sdhi_ops *ops);
-	void (*cleanup)(struct platform_device *pdev);
-};
-
-#endif /* LINUX_MMC_SH_MOBILE_SDHI_H */
diff --git a/ANDROID_3.4.5/include/linux/mmc/tmio.h b/ANDROID_3.4.5/include/linux/mmc/tmio.h
deleted file mode 100644
index a1c1f321..00000000
--- a/ANDROID_3.4.5/include/linux/mmc/tmio.h
+++ /dev/null
@@ -1,65 +0,0 @@
-/*
- * include/linux/mmc/tmio.h
- *
- * Copyright (C) 2007 Ian Molton
- * Copyright (C) 2004 Ian Molton
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Driver for the MMC / SD / SDIO cell found in:
- *
- * TC6393XB TC6391XB TC6387XB T7L66XB ASIC3
- */
-#ifndef LINUX_MMC_TMIO_H
-#define LINUX_MMC_TMIO_H
-
-#define CTL_SD_CMD 0x00
-#define CTL_ARG_REG 0x04
-#define CTL_STOP_INTERNAL_ACTION 0x08
-#define CTL_XFER_BLK_COUNT 0xa
-#define CTL_RESPONSE 0x0c
-#define CTL_STATUS 0x1c
-#define CTL_STATUS2 0x1e
-#define CTL_IRQ_MASK 0x20
-#define CTL_SD_CARD_CLK_CTL 0x24
-#define CTL_SD_XFER_LEN 0x26
-#define CTL_SD_MEM_CARD_OPT 0x28
-#define CTL_SD_ERROR_DETAIL_STATUS 0x2c
-#define CTL_SD_DATA_PORT 0x30
-#define CTL_TRANSACTION_CTL 0x34
-#define CTL_SDIO_STATUS 0x36
-#define CTL_SDIO_IRQ_MASK 0x38
-#define CTL_DMA_ENABLE 0xd8
-#define CTL_RESET_SD 0xe0
-#define CTL_SDIO_REGS 0x100
-#define CTL_CLK_AND_WAIT_CTL 0x138
-#define CTL_RESET_SDIO 0x1e0
-
-/* Definitions for values the CTRL_STATUS register can take. */
-#define TMIO_STAT_CMDRESPEND    0x00000001
-#define TMIO_STAT_DATAEND       0x00000004
-#define TMIO_STAT_CARD_REMOVE   0x00000008
-#define TMIO_STAT_CARD_INSERT   0x00000010
-#define TMIO_STAT_SIGSTATE      0x00000020
-#define TMIO_STAT_WRPROTECT     0x00000080
-#define TMIO_STAT_CARD_REMOVE_A 0x00000100
-#define TMIO_STAT_CARD_INSERT_A 0x00000200
-#define TMIO_STAT_SIGSTATE_A    0x00000400
-#define TMIO_STAT_CMD_IDX_ERR   0x00010000
-#define TMIO_STAT_CRCFAIL       0x00020000
-#define TMIO_STAT_STOPBIT_ERR   0x00040000
-#define TMIO_STAT_DATATIMEOUT   0x00080000
-#define TMIO_STAT_RXOVERFLOW    0x00100000
-#define TMIO_STAT_TXUNDERRUN    0x00200000
-#define TMIO_STAT_CMDTIMEOUT    0x00400000
-#define TMIO_STAT_RXRDY         0x01000000
-#define TMIO_STAT_TXRQ          0x02000000
-#define TMIO_STAT_ILL_FUNC      0x20000000
-#define TMIO_STAT_CMD_BUSY      0x40000000
-#define TMIO_STAT_ILL_ACCESS    0x80000000
-
-#define TMIO_BBS		512		/* Boot block size */
-
-#endif /* LINUX_MMC_TMIO_H */
diff --git a/ANDROID_3.4.5/include/linux/mmdebug.h b/ANDROID_3.4.5/include/linux/mmdebug.h
deleted file mode 100644
index c04ecfe0..00000000
--- a/ANDROID_3.4.5/include/linux/mmdebug.h
+++ /dev/null
@@ -1,16 +0,0 @@
-#ifndef LINUX_MM_DEBUG_H
-#define LINUX_MM_DEBUG_H 1
-
-#ifdef CONFIG_DEBUG_VM
-#define VM_BUG_ON(cond) BUG_ON(cond)
-#else
-#define VM_BUG_ON(cond) do { (void)(cond); } while (0)
-#endif
-
-#ifdef CONFIG_DEBUG_VIRTUAL
-#define VIRTUAL_BUG_ON(cond) BUG_ON(cond)
-#else
-#define VIRTUAL_BUG_ON(cond) do { } while (0)
-#endif
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/mmiotrace.h b/ANDROID_3.4.5/include/linux/mmiotrace.h
deleted file mode 100644
index c5d52780..00000000
--- a/ANDROID_3.4.5/include/linux/mmiotrace.h
+++ /dev/null
@@ -1,111 +0,0 @@
-#ifndef _LINUX_MMIOTRACE_H
-#define _LINUX_MMIOTRACE_H
-
-#include <linux/types.h>
-#include <linux/list.h>
-
-struct kmmio_probe;
-struct pt_regs;
-
-typedef void (*kmmio_pre_handler_t)(struct kmmio_probe *,
-				struct pt_regs *, unsigned long addr);
-typedef void (*kmmio_post_handler_t)(struct kmmio_probe *,
-				unsigned long condition, struct pt_regs *);
-
-struct kmmio_probe {
-	/* kmmio internal list: */
-	struct list_head	list;
-	/* start location of the probe point: */
-	unsigned long		addr;
-	/* length of the probe region: */
-	unsigned long		len;
-	/* Called before addr is executed: */
-	kmmio_pre_handler_t	pre_handler;
-	/* Called after addr is executed: */
-	kmmio_post_handler_t	post_handler;
-	void			*private;
-};
-
-extern unsigned int kmmio_count;
-
-extern int register_kmmio_probe(struct kmmio_probe *p);
-extern void unregister_kmmio_probe(struct kmmio_probe *p);
-extern int kmmio_init(void);
-extern void kmmio_cleanup(void);
-
-#ifdef CONFIG_MMIOTRACE
-/* kmmio is active by some kmmio_probes? */
-static inline int is_kmmio_active(void)
-{
-	return kmmio_count;
-}
-
-/* Called from page fault handler. */
-extern int kmmio_handler(struct pt_regs *regs, unsigned long addr);
-
-/* Called from ioremap.c */
-extern void mmiotrace_ioremap(resource_size_t offset, unsigned long size,
-							void __iomem *addr);
-extern void mmiotrace_iounmap(volatile void __iomem *addr);
-
-/* For anyone to insert markers. Remember trailing newline. */
-extern __printf(1, 2) int mmiotrace_printk(const char *fmt, ...);
-#else /* !CONFIG_MMIOTRACE: */
-static inline int is_kmmio_active(void)
-{
-	return 0;
-}
-
-static inline int kmmio_handler(struct pt_regs *regs, unsigned long addr)
-{
-	return 0;
-}
-
-static inline void mmiotrace_ioremap(resource_size_t offset,
-					unsigned long size, void __iomem *addr)
-{
-}
-
-static inline void mmiotrace_iounmap(volatile void __iomem *addr)
-{
-}
-
-static inline __printf(1, 2) int mmiotrace_printk(const char *fmt, ...)
-{
-	return 0;
-}
-#endif /* CONFIG_MMIOTRACE */
-
-enum mm_io_opcode {
-	MMIO_READ	= 0x1,	/* struct mmiotrace_rw */
-	MMIO_WRITE	= 0x2,	/* struct mmiotrace_rw */
-	MMIO_PROBE	= 0x3,	/* struct mmiotrace_map */
-	MMIO_UNPROBE	= 0x4,	/* struct mmiotrace_map */
-	MMIO_UNKNOWN_OP = 0x5,	/* struct mmiotrace_rw */
-};
-
-struct mmiotrace_rw {
-	resource_size_t	phys;	/* PCI address of register */
-	unsigned long	value;
-	unsigned long	pc;	/* optional program counter */
-	int		map_id;
-	unsigned char	opcode;	/* one of MMIO_{READ,WRITE,UNKNOWN_OP} */
-	unsigned char	width;	/* size of register access in bytes */
-};
-
-struct mmiotrace_map {
-	resource_size_t	phys;	/* base address in PCI space */
-	unsigned long	virt;	/* base virtual address */
-	unsigned long	len;	/* mapping size */
-	int		map_id;
-	unsigned char	opcode;	/* MMIO_PROBE or MMIO_UNPROBE */
-};
-
-/* in kernel/trace/trace_mmiotrace.c */
-extern void enable_mmiotrace(void);
-extern void disable_mmiotrace(void);
-extern void mmio_trace_rw(struct mmiotrace_rw *rw);
-extern void mmio_trace_mapping(struct mmiotrace_map *map);
-extern int mmio_trace_printk(const char *fmt, va_list args);
-
-#endif /* _LINUX_MMIOTRACE_H */
diff --git a/ANDROID_3.4.5/include/linux/mmtimer.h b/ANDROID_3.4.5/include/linux/mmtimer.h
deleted file mode 100644
index 884cabf1..00000000
--- a/ANDROID_3.4.5/include/linux/mmtimer.h
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- * Intel Multimedia Timer device interface
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (c) 2001-2004 Silicon Graphics, Inc.  All rights reserved.
- *
- * This file should define an interface compatible with the IA-PC Multimedia
- * Timers Draft Specification (rev. 0.97) from Intel.  Note that some
- * hardware may not be able to safely export its registers to userspace,
- * so the ioctl interface should support all necessary functionality.
- *
- * 11/01/01 - jbarnes - initial revision
- * 9/10/04 - Christoph Lameter - remove interrupt support
- * 9/17/04 - jbarnes - remove test program, move some #defines to the driver
- */
-
-#ifndef _LINUX_MMTIMER_H
-#define _LINUX_MMTIMER_H
-
-/*
- * Breakdown of the ioctl's available.  An 'optional' next to the command
- * indicates that supporting this command is optional, while 'required'
- * commands must be implemented if conformance is desired.
- *
- * MMTIMER_GETOFFSET - optional
- *   Should return the offset (relative to the start of the page where the
- *   registers are mapped) for the counter in question.
- *
- * MMTIMER_GETRES - required
- *   The resolution of the clock in femto (10^-15) seconds
- *
- * MMTIMER_GETFREQ - required
- *   Frequency of the clock in Hz
- *
- * MMTIMER_GETBITS - required
- *   Number of bits in the clock's counter
- *
- * MMTIMER_MMAPAVAIL - required
- *   Returns nonzero if the registers can be mmap'd into userspace, 0 otherwise
- *
- * MMTIMER_GETCOUNTER - required
- *   Gets the current value in the counter
- */
-#define MMTIMER_IOCTL_BASE 'm'
-
-#define MMTIMER_GETOFFSET _IO(MMTIMER_IOCTL_BASE, 0)
-#define MMTIMER_GETRES _IOR(MMTIMER_IOCTL_BASE, 1, unsigned long)
-#define MMTIMER_GETFREQ _IOR(MMTIMER_IOCTL_BASE, 2, unsigned long)
-#define MMTIMER_GETBITS _IO(MMTIMER_IOCTL_BASE, 4)
-#define MMTIMER_MMAPAVAIL _IO(MMTIMER_IOCTL_BASE, 6)
-#define MMTIMER_GETCOUNTER _IOR(MMTIMER_IOCTL_BASE, 9, unsigned long)
-
-#endif /* _LINUX_MMTIMER_H */
diff --git a/ANDROID_3.4.5/include/linux/mmu_context.h b/ANDROID_3.4.5/include/linux/mmu_context.h
deleted file mode 100644
index 70fffeba..00000000
--- a/ANDROID_3.4.5/include/linux/mmu_context.h
+++ /dev/null
@@ -1,9 +0,0 @@
-#ifndef _LINUX_MMU_CONTEXT_H
-#define _LINUX_MMU_CONTEXT_H
-
-struct mm_struct;
-
-void use_mm(struct mm_struct *mm);
-void unuse_mm(struct mm_struct *mm);
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/mmu_notifier.h b/ANDROID_3.4.5/include/linux/mmu_notifier.h
deleted file mode 100644
index 1d1b1e13..00000000
--- a/ANDROID_3.4.5/include/linux/mmu_notifier.h
+++ /dev/null
@@ -1,379 +0,0 @@
-#ifndef _LINUX_MMU_NOTIFIER_H
-#define _LINUX_MMU_NOTIFIER_H
-
-#include <linux/list.h>
-#include <linux/spinlock.h>
-#include <linux/mm_types.h>
-
-struct mmu_notifier;
-struct mmu_notifier_ops;
-
-#ifdef CONFIG_MMU_NOTIFIER
-
-/*
- * The mmu notifier_mm structure is allocated and installed in
- * mm->mmu_notifier_mm inside the mm_take_all_locks() protected
- * critical section and it's released only when mm_count reaches zero
- * in mmdrop().
- */
-struct mmu_notifier_mm {
-	/* all mmu notifiers registerd in this mm are queued in this list */
-	struct hlist_head list;
-	/* to serialize the list modifications and hlist_unhashed */
-	spinlock_t lock;
-};
-
-struct mmu_notifier_ops {
-	/*
-	 * Called either by mmu_notifier_unregister or when the mm is
-	 * being destroyed by exit_mmap, always before all pages are
-	 * freed. This can run concurrently with other mmu notifier
-	 * methods (the ones invoked outside the mm context) and it
-	 * should tear down all secondary mmu mappings and freeze the
-	 * secondary mmu. If this method isn't implemented you've to
-	 * be sure that nothing could possibly write to the pages
-	 * through the secondary mmu by the time the last thread with
-	 * tsk->mm == mm exits.
-	 *
-	 * As side note: the pages freed after ->release returns could
-	 * be immediately reallocated by the gart at an alias physical
-	 * address with a different cache model, so if ->release isn't
-	 * implemented because all _software_ driven memory accesses
-	 * through the secondary mmu are terminated by the time the
-	 * last thread of this mm quits, you've also to be sure that
-	 * speculative _hardware_ operations can't allocate dirty
-	 * cachelines in the cpu that could not be snooped and made
-	 * coherent with the other read and write operations happening
-	 * through the gart alias address, so leading to memory
-	 * corruption.
-	 */
-	void (*release)(struct mmu_notifier *mn,
-			struct mm_struct *mm);
-
-	/*
-	 * clear_flush_young is called after the VM is
-	 * test-and-clearing the young/accessed bitflag in the
-	 * pte. This way the VM will provide proper aging to the
-	 * accesses to the page through the secondary MMUs and not
-	 * only to the ones through the Linux pte.
-	 */
-	int (*clear_flush_young)(struct mmu_notifier *mn,
-				 struct mm_struct *mm,
-				 unsigned long address);
-
-	/*
-	 * test_young is called to check the young/accessed bitflag in
-	 * the secondary pte. This is used to know if the page is
-	 * frequently used without actually clearing the flag or tearing
-	 * down the secondary mapping on the page.
-	 */
-	int (*test_young)(struct mmu_notifier *mn,
-			  struct mm_struct *mm,
-			  unsigned long address);
-
-	/*
-	 * change_pte is called in cases that pte mapping to page is changed:
-	 * for example, when ksm remaps pte to point to a new shared page.
-	 */
-	void (*change_pte)(struct mmu_notifier *mn,
-			   struct mm_struct *mm,
-			   unsigned long address,
-			   pte_t pte);
-
-	/*
-	 * Before this is invoked any secondary MMU is still ok to
-	 * read/write to the page previously pointed to by the Linux
-	 * pte because the page hasn't been freed yet and it won't be
-	 * freed until this returns. If required set_page_dirty has to
-	 * be called internally to this method.
-	 */
-	void (*invalidate_page)(struct mmu_notifier *mn,
-				struct mm_struct *mm,
-				unsigned long address);
-
-	/*
-	 * invalidate_range_start() and invalidate_range_end() must be
-	 * paired and are called only when the mmap_sem and/or the
-	 * locks protecting the reverse maps are held. The subsystem
-	 * must guarantee that no additional references are taken to
-	 * the pages in the range established between the call to
-	 * invalidate_range_start() and the matching call to
-	 * invalidate_range_end().
-	 *
-	 * Invalidation of multiple concurrent ranges may be
-	 * optionally permitted by the driver. Either way the
-	 * establishment of sptes is forbidden in the range passed to
-	 * invalidate_range_begin/end for the whole duration of the
-	 * invalidate_range_begin/end critical section.
-	 *
-	 * invalidate_range_start() is called when all pages in the
-	 * range are still mapped and have at least a refcount of one.
-	 *
-	 * invalidate_range_end() is called when all pages in the
-	 * range have been unmapped and the pages have been freed by
-	 * the VM.
-	 *
-	 * The VM will remove the page table entries and potentially
-	 * the page between invalidate_range_start() and
-	 * invalidate_range_end(). If the page must not be freed
-	 * because of pending I/O or other circumstances then the
-	 * invalidate_range_start() callback (or the initial mapping
-	 * by the driver) must make sure that the refcount is kept
-	 * elevated.
-	 *
-	 * If the driver increases the refcount when the pages are
-	 * initially mapped into an address space then either
-	 * invalidate_range_start() or invalidate_range_end() may
-	 * decrease the refcount. If the refcount is decreased on
-	 * invalidate_range_start() then the VM can free pages as page
-	 * table entries are removed.  If the refcount is only
-	 * droppped on invalidate_range_end() then the driver itself
-	 * will drop the last refcount but it must take care to flush
-	 * any secondary tlb before doing the final free on the
-	 * page. Pages will no longer be referenced by the linux
-	 * address space but may still be referenced by sptes until
-	 * the last refcount is dropped.
-	 */
-	void (*invalidate_range_start)(struct mmu_notifier *mn,
-				       struct mm_struct *mm,
-				       unsigned long start, unsigned long end);
-	void (*invalidate_range_end)(struct mmu_notifier *mn,
-				     struct mm_struct *mm,
-				     unsigned long start, unsigned long end);
-};
-
-/*
- * The notifier chains are protected by mmap_sem and/or the reverse map
- * semaphores. Notifier chains are only changed when all reverse maps and
- * the mmap_sem locks are taken.
- *
- * Therefore notifier chains can only be traversed when either
- *
- * 1. mmap_sem is held.
- * 2. One of the reverse map locks is held (i_mmap_mutex or anon_vma->mutex).
- * 3. No other concurrent thread can access the list (release)
- */
-struct mmu_notifier {
-	struct hlist_node hlist;
-	const struct mmu_notifier_ops *ops;
-};
-
-static inline int mm_has_notifiers(struct mm_struct *mm)
-{
-	return unlikely(mm->mmu_notifier_mm);
-}
-
-extern int mmu_notifier_register(struct mmu_notifier *mn,
-				 struct mm_struct *mm);
-extern int __mmu_notifier_register(struct mmu_notifier *mn,
-				   struct mm_struct *mm);
-extern void mmu_notifier_unregister(struct mmu_notifier *mn,
-				    struct mm_struct *mm);
-extern void __mmu_notifier_mm_destroy(struct mm_struct *mm);
-extern void __mmu_notifier_release(struct mm_struct *mm);
-extern int __mmu_notifier_clear_flush_young(struct mm_struct *mm,
-					  unsigned long address);
-extern int __mmu_notifier_test_young(struct mm_struct *mm,
-				     unsigned long address);
-extern void __mmu_notifier_change_pte(struct mm_struct *mm,
-				      unsigned long address, pte_t pte);
-extern void __mmu_notifier_invalidate_page(struct mm_struct *mm,
-					  unsigned long address);
-extern void __mmu_notifier_invalidate_range_start(struct mm_struct *mm,
-				  unsigned long start, unsigned long end);
-extern void __mmu_notifier_invalidate_range_end(struct mm_struct *mm,
-				  unsigned long start, unsigned long end);
-
-static inline void mmu_notifier_release(struct mm_struct *mm)
-{
-	if (mm_has_notifiers(mm))
-		__mmu_notifier_release(mm);
-}
-
-static inline int mmu_notifier_clear_flush_young(struct mm_struct *mm,
-					  unsigned long address)
-{
-	if (mm_has_notifiers(mm))
-		return __mmu_notifier_clear_flush_young(mm, address);
-	return 0;
-}
-
-static inline int mmu_notifier_test_young(struct mm_struct *mm,
-					  unsigned long address)
-{
-	if (mm_has_notifiers(mm))
-		return __mmu_notifier_test_young(mm, address);
-	return 0;
-}
-
-static inline void mmu_notifier_change_pte(struct mm_struct *mm,
-					   unsigned long address, pte_t pte)
-{
-	if (mm_has_notifiers(mm))
-		__mmu_notifier_change_pte(mm, address, pte);
-}
-
-static inline void mmu_notifier_invalidate_page(struct mm_struct *mm,
-					  unsigned long address)
-{
-	if (mm_has_notifiers(mm))
-		__mmu_notifier_invalidate_page(mm, address);
-}
-
-static inline void mmu_notifier_invalidate_range_start(struct mm_struct *mm,
-				  unsigned long start, unsigned long end)
-{
-	if (mm_has_notifiers(mm))
-		__mmu_notifier_invalidate_range_start(mm, start, end);
-}
-
-static inline void mmu_notifier_invalidate_range_end(struct mm_struct *mm,
-				  unsigned long start, unsigned long end)
-{
-	if (mm_has_notifiers(mm))
-		__mmu_notifier_invalidate_range_end(mm, start, end);
-}
-
-static inline void mmu_notifier_mm_init(struct mm_struct *mm)
-{
-	mm->mmu_notifier_mm = NULL;
-}
-
-static inline void mmu_notifier_mm_destroy(struct mm_struct *mm)
-{
-	if (mm_has_notifiers(mm))
-		__mmu_notifier_mm_destroy(mm);
-}
-
-/*
- * These two macros will sometime replace ptep_clear_flush.
- * ptep_clear_flush is implemented as macro itself, so this also is
- * implemented as a macro until ptep_clear_flush will converted to an
- * inline function, to diminish the risk of compilation failure. The
- * invalidate_page method over time can be moved outside the PT lock
- * and these two macros can be later removed.
- */
-#define ptep_clear_flush_notify(__vma, __address, __ptep)		\
-({									\
-	pte_t __pte;							\
-	struct vm_area_struct *___vma = __vma;				\
-	unsigned long ___address = __address;				\
-	__pte = ptep_clear_flush(___vma, ___address, __ptep);		\
-	mmu_notifier_invalidate_page(___vma->vm_mm, ___address);	\
-	__pte;								\
-})
-
-#define pmdp_clear_flush_notify(__vma, __address, __pmdp)		\
-({									\
-	pmd_t __pmd;							\
-	struct vm_area_struct *___vma = __vma;				\
-	unsigned long ___address = __address;				\
-	VM_BUG_ON(__address & ~HPAGE_PMD_MASK);				\
-	mmu_notifier_invalidate_range_start(___vma->vm_mm, ___address,	\
-					    (__address)+HPAGE_PMD_SIZE);\
-	__pmd = pmdp_clear_flush(___vma, ___address, __pmdp);		\
-	mmu_notifier_invalidate_range_end(___vma->vm_mm, ___address,	\
-					  (__address)+HPAGE_PMD_SIZE);	\
-	__pmd;								\
-})
-
-#define pmdp_splitting_flush_notify(__vma, __address, __pmdp)		\
-({									\
-	struct vm_area_struct *___vma = __vma;				\
-	unsigned long ___address = __address;				\
-	VM_BUG_ON(__address & ~HPAGE_PMD_MASK);				\
-	mmu_notifier_invalidate_range_start(___vma->vm_mm, ___address,	\
-					    (__address)+HPAGE_PMD_SIZE);\
-	pmdp_splitting_flush(___vma, ___address, __pmdp);		\
-	mmu_notifier_invalidate_range_end(___vma->vm_mm, ___address,	\
-					  (__address)+HPAGE_PMD_SIZE);	\
-})
-
-#define ptep_clear_flush_young_notify(__vma, __address, __ptep)		\
-({									\
-	int __young;							\
-	struct vm_area_struct *___vma = __vma;				\
-	unsigned long ___address = __address;				\
-	__young = ptep_clear_flush_young(___vma, ___address, __ptep);	\
-	__young |= mmu_notifier_clear_flush_young(___vma->vm_mm,	\
-						  ___address);		\
-	__young;							\
-})
-
-#define pmdp_clear_flush_young_notify(__vma, __address, __pmdp)		\
-({									\
-	int __young;							\
-	struct vm_area_struct *___vma = __vma;				\
-	unsigned long ___address = __address;				\
-	__young = pmdp_clear_flush_young(___vma, ___address, __pmdp);	\
-	__young |= mmu_notifier_clear_flush_young(___vma->vm_mm,	\
-						  ___address);		\
-	__young;							\
-})
-
-#define set_pte_at_notify(__mm, __address, __ptep, __pte)		\
-({									\
-	struct mm_struct *___mm = __mm;					\
-	unsigned long ___address = __address;				\
-	pte_t ___pte = __pte;						\
-									\
-	set_pte_at(___mm, ___address, __ptep, ___pte);			\
-	mmu_notifier_change_pte(___mm, ___address, ___pte);		\
-})
-
-#else /* CONFIG_MMU_NOTIFIER */
-
-static inline void mmu_notifier_release(struct mm_struct *mm)
-{
-}
-
-static inline int mmu_notifier_clear_flush_young(struct mm_struct *mm,
-					  unsigned long address)
-{
-	return 0;
-}
-
-static inline int mmu_notifier_test_young(struct mm_struct *mm,
-					  unsigned long address)
-{
-	return 0;
-}
-
-static inline void mmu_notifier_change_pte(struct mm_struct *mm,
-					   unsigned long address, pte_t pte)
-{
-}
-
-static inline void mmu_notifier_invalidate_page(struct mm_struct *mm,
-					  unsigned long address)
-{
-}
-
-static inline void mmu_notifier_invalidate_range_start(struct mm_struct *mm,
-				  unsigned long start, unsigned long end)
-{
-}
-
-static inline void mmu_notifier_invalidate_range_end(struct mm_struct *mm,
-				  unsigned long start, unsigned long end)
-{
-}
-
-static inline void mmu_notifier_mm_init(struct mm_struct *mm)
-{
-}
-
-static inline void mmu_notifier_mm_destroy(struct mm_struct *mm)
-{
-}
-
-#define ptep_clear_flush_young_notify ptep_clear_flush_young
-#define pmdp_clear_flush_young_notify pmdp_clear_flush_young
-#define ptep_clear_flush_notify ptep_clear_flush
-#define pmdp_clear_flush_notify pmdp_clear_flush
-#define pmdp_splitting_flush_notify pmdp_splitting_flush
-#define set_pte_at_notify set_pte_at
-
-#endif /* CONFIG_MMU_NOTIFIER */
-
-#endif /* _LINUX_MMU_NOTIFIER_H */
diff --git a/ANDROID_3.4.5/include/linux/mmzone.h b/ANDROID_3.4.5/include/linux/mmzone.h
deleted file mode 100644
index 5f6806bd..00000000
--- a/ANDROID_3.4.5/include/linux/mmzone.h
+++ /dev/null
@@ -1,1182 +0,0 @@
-#ifndef _LINUX_MMZONE_H
-#define _LINUX_MMZONE_H
-
-#ifndef __ASSEMBLY__
-#ifndef __GENERATING_BOUNDS_H
-
-#include <linux/spinlock.h>
-#include <linux/list.h>
-#include <linux/wait.h>
-#include <linux/bitops.h>
-#include <linux/cache.h>
-#include <linux/threads.h>
-#include <linux/numa.h>
-#include <linux/init.h>
-#include <linux/seqlock.h>
-#include <linux/nodemask.h>
-#include <linux/pageblock-flags.h>
-#include <generated/bounds.h>
-#include <linux/atomic.h>
-#include <asm/page.h>
-
-/* Free memory management - zoned buddy allocator.  */
-#ifndef CONFIG_FORCE_MAX_ZONEORDER
-#define MAX_ORDER 11
-#else
-#define MAX_ORDER CONFIG_FORCE_MAX_ZONEORDER
-#endif
-#define MAX_ORDER_NR_PAGES (1 << (MAX_ORDER - 1))
-
-/*
- * PAGE_ALLOC_COSTLY_ORDER is the order at which allocations are deemed
- * costly to service.  That is between allocation orders which should
- * coelesce naturally under reasonable reclaim pressure and those which
- * will not.
- */
-#define PAGE_ALLOC_COSTLY_ORDER 3
-
-#define MIGRATE_UNMOVABLE     0
-#define MIGRATE_RECLAIMABLE   1
-#define MIGRATE_MOVABLE       2
-#define MIGRATE_PCPTYPES      3 /* the number of types on the pcp lists */
-#define MIGRATE_RESERVE       3
-#define MIGRATE_ISOLATE       4 /* can't allocate from here */
-#define MIGRATE_TYPES         5
-
-#define for_each_migratetype_order(order, type) \
-	for (order = 0; order < MAX_ORDER; order++) \
-		for (type = 0; type < MIGRATE_TYPES; type++)
-
-extern int page_group_by_mobility_disabled;
-
-static inline int get_pageblock_migratetype(struct page *page)
-{
-	return get_pageblock_flags_group(page, PB_migrate, PB_migrate_end);
-}
-
-struct free_area {
-	struct list_head	free_list[MIGRATE_TYPES];
-	unsigned long		nr_free;
-};
-
-struct pglist_data;
-
-/*
- * zone->lock and zone->lru_lock are two of the hottest locks in the kernel.
- * So add a wild amount of padding here to ensure that they fall into separate
- * cachelines.  There are very few zone structures in the machine, so space
- * consumption is not a concern here.
- */
-#if defined(CONFIG_SMP)
-struct zone_padding {
-	char x[0];
-} ____cacheline_internodealigned_in_smp;
-#define ZONE_PADDING(name)	struct zone_padding name;
-#else
-#define ZONE_PADDING(name)
-#endif
-
-enum zone_stat_item {
-	/* First 128 byte cacheline (assuming 64 bit words) */
-	NR_FREE_PAGES,
-	NR_LRU_BASE,
-	NR_INACTIVE_ANON = NR_LRU_BASE, /* must match order of LRU_[IN]ACTIVE */
-	NR_ACTIVE_ANON,		/*  "     "     "   "       "         */
-	NR_INACTIVE_FILE,	/*  "     "     "   "       "         */
-	NR_ACTIVE_FILE,		/*  "     "     "   "       "         */
-	NR_UNEVICTABLE,		/*  "     "     "   "       "         */
-	NR_MLOCK,		/* mlock()ed pages found and moved off LRU */
-	NR_ANON_PAGES,	/* Mapped anonymous pages */
-	NR_FILE_MAPPED,	/* pagecache pages mapped into pagetables.
-			   only modified from process context */
-	NR_FILE_PAGES,
-	NR_FILE_DIRTY,
-	NR_WRITEBACK,
-	NR_SLAB_RECLAIMABLE,
-	NR_SLAB_UNRECLAIMABLE,
-	NR_PAGETABLE,		/* used for pagetables */
-	NR_KERNEL_STACK,
-	/* Second 128 byte cacheline */
-	NR_UNSTABLE_NFS,	/* NFS unstable pages */
-	NR_BOUNCE,
-	NR_VMSCAN_WRITE,
-	NR_VMSCAN_IMMEDIATE,	/* Prioritise for reclaim when writeback ends */
-	NR_WRITEBACK_TEMP,	/* Writeback using temporary buffers */
-	NR_ISOLATED_ANON,	/* Temporary isolated pages from anon lru */
-	NR_ISOLATED_FILE,	/* Temporary isolated pages from file lru */
-	NR_SHMEM,		/* shmem pages (included tmpfs/GEM pages) */
-	NR_DIRTIED,		/* page dirtyings since bootup */
-	NR_WRITTEN,		/* page writings since bootup */
-#ifdef CONFIG_NUMA
-	NUMA_HIT,		/* allocated in intended node */
-	NUMA_MISS,		/* allocated in non intended node */
-	NUMA_FOREIGN,		/* was intended here, hit elsewhere */
-	NUMA_INTERLEAVE_HIT,	/* interleaver preferred this zone */
-	NUMA_LOCAL,		/* allocation from local node */
-	NUMA_OTHER,		/* allocation from other node */
-#endif
-	NR_ANON_TRANSPARENT_HUGEPAGES,
-	NR_VM_ZONE_STAT_ITEMS };
-
-/*
- * We do arithmetic on the LRU lists in various places in the code,
- * so it is important to keep the active lists LRU_ACTIVE higher in
- * the array than the corresponding inactive lists, and to keep
- * the *_FILE lists LRU_FILE higher than the corresponding _ANON lists.
- *
- * This has to be kept in sync with the statistics in zone_stat_item
- * above and the descriptions in vmstat_text in mm/vmstat.c
- */
-#define LRU_BASE 0
-#define LRU_ACTIVE 1
-#define LRU_FILE 2
-
-enum lru_list {
-	LRU_INACTIVE_ANON = LRU_BASE,
-	LRU_ACTIVE_ANON = LRU_BASE + LRU_ACTIVE,
-	LRU_INACTIVE_FILE = LRU_BASE + LRU_FILE,
-	LRU_ACTIVE_FILE = LRU_BASE + LRU_FILE + LRU_ACTIVE,
-	LRU_UNEVICTABLE,
-	NR_LRU_LISTS
-};
-
-#define for_each_lru(lru) for (lru = 0; lru < NR_LRU_LISTS; lru++)
-
-#define for_each_evictable_lru(lru) for (lru = 0; lru <= LRU_ACTIVE_FILE; lru++)
-
-static inline int is_file_lru(enum lru_list lru)
-{
-	return (lru == LRU_INACTIVE_FILE || lru == LRU_ACTIVE_FILE);
-}
-
-static inline int is_active_lru(enum lru_list lru)
-{
-	return (lru == LRU_ACTIVE_ANON || lru == LRU_ACTIVE_FILE);
-}
-
-static inline int is_unevictable_lru(enum lru_list lru)
-{
-	return (lru == LRU_UNEVICTABLE);
-}
-
-struct lruvec {
-	struct list_head lists[NR_LRU_LISTS];
-};
-
-/* Mask used at gathering information at once (see memcontrol.c) */
-#define LRU_ALL_FILE (BIT(LRU_INACTIVE_FILE) | BIT(LRU_ACTIVE_FILE))
-#define LRU_ALL_ANON (BIT(LRU_INACTIVE_ANON) | BIT(LRU_ACTIVE_ANON))
-#define LRU_ALL_EVICTABLE (LRU_ALL_FILE | LRU_ALL_ANON)
-#define LRU_ALL	     ((1 << NR_LRU_LISTS) - 1)
-
-/* Isolate inactive pages */
-#define ISOLATE_INACTIVE	((__force isolate_mode_t)0x1)
-/* Isolate active pages */
-#define ISOLATE_ACTIVE		((__force isolate_mode_t)0x2)
-/* Isolate clean file */
-#define ISOLATE_CLEAN		((__force isolate_mode_t)0x4)
-/* Isolate unmapped file */
-#define ISOLATE_UNMAPPED	((__force isolate_mode_t)0x8)
-/* Isolate for asynchronous migration */
-#define ISOLATE_ASYNC_MIGRATE	((__force isolate_mode_t)0x10)
-
-/* LRU Isolation modes. */
-typedef unsigned __bitwise__ isolate_mode_t;
-
-enum zone_watermarks {
-	WMARK_MIN,
-	WMARK_LOW,
-	WMARK_HIGH,
-	NR_WMARK
-};
-
-#define min_wmark_pages(z) (z->watermark[WMARK_MIN])
-#define low_wmark_pages(z) (z->watermark[WMARK_LOW])
-#define high_wmark_pages(z) (z->watermark[WMARK_HIGH])
-
-struct per_cpu_pages {
-	int count;		/* number of pages in the list */
-	int high;		/* high watermark, emptying needed */
-	int batch;		/* chunk size for buddy add/remove */
-
-	/* Lists of pages, one per migrate type stored on the pcp-lists */
-	struct list_head lists[MIGRATE_PCPTYPES];
-};
-
-struct per_cpu_pageset {
-	struct per_cpu_pages pcp;
-#ifdef CONFIG_NUMA
-	s8 expire;
-#endif
-#ifdef CONFIG_SMP
-	s8 stat_threshold;
-	s8 vm_stat_diff[NR_VM_ZONE_STAT_ITEMS];
-#endif
-};
-
-#endif /* !__GENERATING_BOUNDS.H */
-
-enum zone_type {
-#ifdef CONFIG_ZONE_DMA
-	/*
-	 * ZONE_DMA is used when there are devices that are not able
-	 * to do DMA to all of addressable memory (ZONE_NORMAL). Then we
-	 * carve out the portion of memory that is needed for these devices.
-	 * The range is arch specific.
-	 *
-	 * Some examples
-	 *
-	 * Architecture		Limit
-	 * ---------------------------
-	 * parisc, ia64, sparc	<4G
-	 * s390			<2G
-	 * arm			Various
-	 * alpha		Unlimited or 0-16MB.
-	 *
-	 * i386, x86_64 and multiple other arches
-	 * 			<16M.
-	 */
-	ZONE_DMA,
-#endif
-#ifdef CONFIG_ZONE_DMA32
-	/*
-	 * x86_64 needs two ZONE_DMAs because it supports devices that are
-	 * only able to do DMA to the lower 16M but also 32 bit devices that
-	 * can only do DMA areas below 4G.
-	 */
-	ZONE_DMA32,
-#endif
-	/*
-	 * Normal addressable memory is in ZONE_NORMAL. DMA operations can be
-	 * performed on pages in ZONE_NORMAL if the DMA devices support
-	 * transfers to all addressable memory.
-	 */
-	ZONE_NORMAL,
-#ifdef CONFIG_HIGHMEM
-	/*
-	 * A memory area that is only addressable by the kernel through
-	 * mapping portions into its own address space. This is for example
-	 * used by i386 to allow the kernel to address the memory beyond
-	 * 900MB. The kernel will set up special mappings (page
-	 * table entries on i386) for each page that the kernel needs to
-	 * access.
-	 */
-	ZONE_HIGHMEM,
-#endif
-	ZONE_MOVABLE,
-	__MAX_NR_ZONES
-};
-
-#ifndef __GENERATING_BOUNDS_H
-
-/*
- * When a memory allocation must conform to specific limitations (such
- * as being suitable for DMA) the caller will pass in hints to the
- * allocator in the gfp_mask, in the zone modifier bits.  These bits
- * are used to select a priority ordered list of memory zones which
- * match the requested limits. See gfp_zone() in include/linux/gfp.h
- */
-
-#if MAX_NR_ZONES < 2
-#define ZONES_SHIFT 0
-#elif MAX_NR_ZONES <= 2
-#define ZONES_SHIFT 1
-#elif MAX_NR_ZONES <= 4
-#define ZONES_SHIFT 2
-#else
-#error ZONES_SHIFT -- too many zones configured adjust calculation
-#endif
-
-struct zone_reclaim_stat {
-	/*
-	 * The pageout code in vmscan.c keeps track of how many of the
-	 * mem/swap backed and file backed pages are refeferenced.
-	 * The higher the rotated/scanned ratio, the more valuable
-	 * that cache is.
-	 *
-	 * The anon LRU stats live in [0], file LRU stats in [1]
-	 */
-	unsigned long		recent_rotated[2];
-	unsigned long		recent_scanned[2];
-};
-
-struct zone {
-	/* Fields commonly accessed by the page allocator */
-
-	/* zone watermarks, access with *_wmark_pages(zone) macros */
-	unsigned long watermark[NR_WMARK];
-
-	/*
-	 * When free pages are below this point, additional steps are taken
-	 * when reading the number of free pages to avoid per-cpu counter
-	 * drift allowing watermarks to be breached
-	 */
-	unsigned long percpu_drift_mark;
-
-	/*
-	 * We don't know if the memory that we're going to allocate will be freeable
-	 * or/and it will be released eventually, so to avoid totally wasting several
-	 * GB of ram we must reserve some of the lower zone memory (otherwise we risk
-	 * to run OOM on the lower zones despite there's tons of freeable ram
-	 * on the higher zones). This array is recalculated at runtime if the
-	 * sysctl_lowmem_reserve_ratio sysctl changes.
-	 */
-	unsigned long		lowmem_reserve[MAX_NR_ZONES];
-
-	/*
-	 * This is a per-zone reserve of pages that should not be
-	 * considered dirtyable memory.
-	 */
-	unsigned long		dirty_balance_reserve;
-
-#ifdef CONFIG_NUMA
-	int node;
-	/*
-	 * zone reclaim becomes active if more unmapped pages exist.
-	 */
-	unsigned long		min_unmapped_pages;
-	unsigned long		min_slab_pages;
-#endif
-	struct per_cpu_pageset __percpu *pageset;
-	/*
-	 * free areas of different sizes
-	 */
-	spinlock_t		lock;
-	int                     all_unreclaimable; /* All pages pinned */
-#ifdef CONFIG_MEMORY_HOTPLUG
-	/* see spanned/present_pages for more description */
-	seqlock_t		span_seqlock;
-#endif
-	struct free_area	free_area[MAX_ORDER];
-
-#ifndef CONFIG_SPARSEMEM
-	/*
-	 * Flags for a pageblock_nr_pages block. See pageblock-flags.h.
-	 * In SPARSEMEM, this map is stored in struct mem_section
-	 */
-	unsigned long		*pageblock_flags;
-#endif /* CONFIG_SPARSEMEM */
-
-#ifdef CONFIG_COMPACTION
-	/*
-	 * On compaction failure, 1<<compact_defer_shift compactions
-	 * are skipped before trying again. The number attempted since
-	 * last failure is tracked with compact_considered.
-	 */
-	unsigned int		compact_considered;
-	unsigned int		compact_defer_shift;
-	int			compact_order_failed;
-#endif
-
-	ZONE_PADDING(_pad1_)
-
-	/* Fields commonly accessed by the page reclaim scanner */
-	spinlock_t		lru_lock;
-	struct lruvec		lruvec;
-
-	struct zone_reclaim_stat reclaim_stat;
-
-	unsigned long		pages_scanned;	   /* since last reclaim */
-	unsigned long		flags;		   /* zone flags, see below */
-
-	/* Zone statistics */
-	atomic_long_t		vm_stat[NR_VM_ZONE_STAT_ITEMS];
-
-	/*
-	 * The target ratio of ACTIVE_ANON to INACTIVE_ANON pages on
-	 * this zone's LRU.  Maintained by the pageout code.
-	 */
-	unsigned int inactive_ratio;
-
-
-	ZONE_PADDING(_pad2_)
-	/* Rarely used or read-mostly fields */
-
-	/*
-	 * wait_table		-- the array holding the hash table
-	 * wait_table_hash_nr_entries	-- the size of the hash table array
-	 * wait_table_bits	-- wait_table_size == (1 << wait_table_bits)
-	 *
-	 * The purpose of all these is to keep track of the people
-	 * waiting for a page to become available and make them
-	 * runnable again when possible. The trouble is that this
-	 * consumes a lot of space, especially when so few things
-	 * wait on pages at a given time. So instead of using
-	 * per-page waitqueues, we use a waitqueue hash table.
-	 *
-	 * The bucket discipline is to sleep on the same queue when
-	 * colliding and wake all in that wait queue when removing.
-	 * When something wakes, it must check to be sure its page is
-	 * truly available, a la thundering herd. The cost of a
-	 * collision is great, but given the expected load of the
-	 * table, they should be so rare as to be outweighed by the
-	 * benefits from the saved space.
-	 *
-	 * __wait_on_page_locked() and unlock_page() in mm/filemap.c, are the
-	 * primary users of these fields, and in mm/page_alloc.c
-	 * free_area_init_core() performs the initialization of them.
-	 */
-	wait_queue_head_t	* wait_table;
-	unsigned long		wait_table_hash_nr_entries;
-	unsigned long		wait_table_bits;
-
-	/*
-	 * Discontig memory support fields.
-	 */
-	struct pglist_data	*zone_pgdat;
-	/* zone_start_pfn == zone_start_paddr >> PAGE_SHIFT */
-	unsigned long		zone_start_pfn;
-
-	/*
-	 * zone_start_pfn, spanned_pages and present_pages are all
-	 * protected by span_seqlock.  It is a seqlock because it has
-	 * to be read outside of zone->lock, and it is done in the main
-	 * allocator path.  But, it is written quite infrequently.
-	 *
-	 * The lock is declared along with zone->lock because it is
-	 * frequently read in proximity to zone->lock.  It's good to
-	 * give them a chance of being in the same cacheline.
-	 */
-	unsigned long		spanned_pages;	/* total size, including holes */
-	unsigned long		present_pages;	/* amount of memory (excluding holes) */
-
-	/*
-	 * rarely used fields:
-	 */
-	const char		*name;
-} ____cacheline_internodealigned_in_smp;
-
-typedef enum {
-	ZONE_RECLAIM_LOCKED,		/* prevents concurrent reclaim */
-	ZONE_OOM_LOCKED,		/* zone is in OOM killer zonelist */
-	ZONE_CONGESTED,			/* zone has many dirty pages backed by
-					 * a congested BDI
-					 */
-} zone_flags_t;
-
-static inline void zone_set_flag(struct zone *zone, zone_flags_t flag)
-{
-	set_bit(flag, &zone->flags);
-}
-
-static inline int zone_test_and_set_flag(struct zone *zone, zone_flags_t flag)
-{
-	return test_and_set_bit(flag, &zone->flags);
-}
-
-static inline void zone_clear_flag(struct zone *zone, zone_flags_t flag)
-{
-	clear_bit(flag, &zone->flags);
-}
-
-static inline int zone_is_reclaim_congested(const struct zone *zone)
-{
-	return test_bit(ZONE_CONGESTED, &zone->flags);
-}
-
-static inline int zone_is_reclaim_locked(const struct zone *zone)
-{
-	return test_bit(ZONE_RECLAIM_LOCKED, &zone->flags);
-}
-
-static inline int zone_is_oom_locked(const struct zone *zone)
-{
-	return test_bit(ZONE_OOM_LOCKED, &zone->flags);
-}
-
-/*
- * The "priority" of VM scanning is how much of the queues we will scan in one
- * go. A value of 12 for DEF_PRIORITY implies that we will scan 1/4096th of the
- * queues ("queue_length >> 12") during an aging round.
- */
-#define DEF_PRIORITY 12
-
-/* Maximum number of zones on a zonelist */
-#define MAX_ZONES_PER_ZONELIST (MAX_NUMNODES * MAX_NR_ZONES)
-
-#ifdef CONFIG_NUMA
-
-/*
- * The NUMA zonelists are doubled because we need zonelists that restrict the
- * allocations to a single node for GFP_THISNODE.
- *
- * [0]	: Zonelist with fallback
- * [1]	: No fallback (GFP_THISNODE)
- */
-#define MAX_ZONELISTS 2
-
-
-/*
- * We cache key information from each zonelist for smaller cache
- * footprint when scanning for free pages in get_page_from_freelist().
- *
- * 1) The BITMAP fullzones tracks which zones in a zonelist have come
- *    up short of free memory since the last time (last_fullzone_zap)
- *    we zero'd fullzones.
- * 2) The array z_to_n[] maps each zone in the zonelist to its node
- *    id, so that we can efficiently evaluate whether that node is
- *    set in the current tasks mems_allowed.
- *
- * Both fullzones and z_to_n[] are one-to-one with the zonelist,
- * indexed by a zones offset in the zonelist zones[] array.
- *
- * The get_page_from_freelist() routine does two scans.  During the
- * first scan, we skip zones whose corresponding bit in 'fullzones'
- * is set or whose corresponding node in current->mems_allowed (which
- * comes from cpusets) is not set.  During the second scan, we bypass
- * this zonelist_cache, to ensure we look methodically at each zone.
- *
- * Once per second, we zero out (zap) fullzones, forcing us to
- * reconsider nodes that might have regained more free memory.
- * The field last_full_zap is the time we last zapped fullzones.
- *
- * This mechanism reduces the amount of time we waste repeatedly
- * reexaming zones for free memory when they just came up low on
- * memory momentarilly ago.
- *
- * The zonelist_cache struct members logically belong in struct
- * zonelist.  However, the mempolicy zonelists constructed for
- * MPOL_BIND are intentionally variable length (and usually much
- * shorter).  A general purpose mechanism for handling structs with
- * multiple variable length members is more mechanism than we want
- * here.  We resort to some special case hackery instead.
- *
- * The MPOL_BIND zonelists don't need this zonelist_cache (in good
- * part because they are shorter), so we put the fixed length stuff
- * at the front of the zonelist struct, ending in a variable length
- * zones[], as is needed by MPOL_BIND.
- *
- * Then we put the optional zonelist cache on the end of the zonelist
- * struct.  This optional stuff is found by a 'zlcache_ptr' pointer in
- * the fixed length portion at the front of the struct.  This pointer
- * both enables us to find the zonelist cache, and in the case of
- * MPOL_BIND zonelists, (which will just set the zlcache_ptr to NULL)
- * to know that the zonelist cache is not there.
- *
- * The end result is that struct zonelists come in two flavors:
- *  1) The full, fixed length version, shown below, and
- *  2) The custom zonelists for MPOL_BIND.
- * The custom MPOL_BIND zonelists have a NULL zlcache_ptr and no zlcache.
- *
- * Even though there may be multiple CPU cores on a node modifying
- * fullzones or last_full_zap in the same zonelist_cache at the same
- * time, we don't lock it.  This is just hint data - if it is wrong now
- * and then, the allocator will still function, perhaps a bit slower.
- */
-
-
-struct zonelist_cache {
-	unsigned short z_to_n[MAX_ZONES_PER_ZONELIST];		/* zone->nid */
-	DECLARE_BITMAP(fullzones, MAX_ZONES_PER_ZONELIST);	/* zone full? */
-	unsigned long last_full_zap;		/* when last zap'd (jiffies) */
-};
-#else
-#define MAX_ZONELISTS 1
-struct zonelist_cache;
-#endif
-
-/*
- * This struct contains information about a zone in a zonelist. It is stored
- * here to avoid dereferences into large structures and lookups of tables
- */
-struct zoneref {
-	struct zone *zone;	/* Pointer to actual zone */
-	int zone_idx;		/* zone_idx(zoneref->zone) */
-};
-
-/*
- * One allocation request operates on a zonelist. A zonelist
- * is a list of zones, the first one is the 'goal' of the
- * allocation, the other zones are fallback zones, in decreasing
- * priority.
- *
- * If zlcache_ptr is not NULL, then it is just the address of zlcache,
- * as explained above.  If zlcache_ptr is NULL, there is no zlcache.
- * *
- * To speed the reading of the zonelist, the zonerefs contain the zone index
- * of the entry being read. Helper functions to access information given
- * a struct zoneref are
- *
- * zonelist_zone()	- Return the struct zone * for an entry in _zonerefs
- * zonelist_zone_idx()	- Return the index of the zone for an entry
- * zonelist_node_idx()	- Return the index of the node for an entry
- */
-struct zonelist {
-	struct zonelist_cache *zlcache_ptr;		     // NULL or &zlcache
-	struct zoneref _zonerefs[MAX_ZONES_PER_ZONELIST + 1];
-#ifdef CONFIG_NUMA
-	struct zonelist_cache zlcache;			     // optional ...
-#endif
-};
-
-#ifdef CONFIG_HAVE_MEMBLOCK_NODE_MAP
-struct node_active_region {
-	unsigned long start_pfn;
-	unsigned long end_pfn;
-	int nid;
-};
-#endif /* CONFIG_HAVE_MEMBLOCK_NODE_MAP */
-
-#ifndef CONFIG_DISCONTIGMEM
-/* The array of struct pages - for discontigmem use pgdat->lmem_map */
-extern struct page *mem_map;
-#endif
-
-/*
- * The pg_data_t structure is used in machines with CONFIG_DISCONTIGMEM
- * (mostly NUMA machines?) to denote a higher-level memory zone than the
- * zone denotes.
- *
- * On NUMA machines, each NUMA node would have a pg_data_t to describe
- * it's memory layout.
- *
- * Memory statistics and page replacement data structures are maintained on a
- * per-zone basis.
- */
-struct bootmem_data;
-typedef struct pglist_data {
-	struct zone node_zones[MAX_NR_ZONES];
-	struct zonelist node_zonelists[MAX_ZONELISTS];
-	int nr_zones;
-#ifdef CONFIG_FLAT_NODE_MEM_MAP	/* means !SPARSEMEM */
-	struct page *node_mem_map;
-#ifdef CONFIG_CGROUP_MEM_RES_CTLR
-	struct page_cgroup *node_page_cgroup;
-#endif
-#endif
-#ifndef CONFIG_NO_BOOTMEM
-	struct bootmem_data *bdata;
-#endif
-#ifdef CONFIG_MEMORY_HOTPLUG
-	/*
-	 * Must be held any time you expect node_start_pfn, node_present_pages
-	 * or node_spanned_pages stay constant.  Holding this will also
-	 * guarantee that any pfn_valid() stays that way.
-	 *
-	 * Nests above zone->lock and zone->size_seqlock.
-	 */
-	spinlock_t node_size_lock;
-#endif
-	unsigned long node_start_pfn;
-	unsigned long node_present_pages; /* total number of physical pages */
-	unsigned long node_spanned_pages; /* total size of physical page
-					     range, including holes */
-	int node_id;
-	wait_queue_head_t kswapd_wait;
-	struct task_struct *kswapd;	/* Protected by lock_memory_hotplug() */
-	int kswapd_max_order;
-	enum zone_type classzone_idx;
-} pg_data_t;
-
-#define node_present_pages(nid)	(NODE_DATA(nid)->node_present_pages)
-#define node_spanned_pages(nid)	(NODE_DATA(nid)->node_spanned_pages)
-#ifdef CONFIG_FLAT_NODE_MEM_MAP
-#define pgdat_page_nr(pgdat, pagenr)	((pgdat)->node_mem_map + (pagenr))
-#else
-#define pgdat_page_nr(pgdat, pagenr)	pfn_to_page((pgdat)->node_start_pfn + (pagenr))
-#endif
-#define nid_page_nr(nid, pagenr) 	pgdat_page_nr(NODE_DATA(nid),(pagenr))
-
-#define node_start_pfn(nid)	(NODE_DATA(nid)->node_start_pfn)
-
-#define node_end_pfn(nid) ({\
-	pg_data_t *__pgdat = NODE_DATA(nid);\
-	__pgdat->node_start_pfn + __pgdat->node_spanned_pages;\
-})
-
-#include <linux/memory_hotplug.h>
-
-extern struct mutex zonelists_mutex;
-void build_all_zonelists(void *data);
-void wakeup_kswapd(struct zone *zone, int order, enum zone_type classzone_idx);
-bool zone_watermark_ok(struct zone *z, int order, unsigned long mark,
-		int classzone_idx, int alloc_flags);
-bool zone_watermark_ok_safe(struct zone *z, int order, unsigned long mark,
-		int classzone_idx, int alloc_flags);
-enum memmap_context {
-	MEMMAP_EARLY,
-	MEMMAP_HOTPLUG,
-};
-extern int init_currently_empty_zone(struct zone *zone, unsigned long start_pfn,
-				     unsigned long size,
-				     enum memmap_context context);
-
-#ifdef CONFIG_HAVE_MEMORY_PRESENT
-void memory_present(int nid, unsigned long start, unsigned long end);
-#else
-static inline void memory_present(int nid, unsigned long start, unsigned long end) {}
-#endif
-
-#ifdef CONFIG_HAVE_MEMORYLESS_NODES
-int local_memory_node(int node_id);
-#else
-static inline int local_memory_node(int node_id) { return node_id; };
-#endif
-
-#ifdef CONFIG_NEED_NODE_MEMMAP_SIZE
-unsigned long __init node_memmap_size_bytes(int, unsigned long, unsigned long);
-#endif
-
-/*
- * zone_idx() returns 0 for the ZONE_DMA zone, 1 for the ZONE_NORMAL zone, etc.
- */
-#define zone_idx(zone)		((zone) - (zone)->zone_pgdat->node_zones)
-
-static inline int populated_zone(struct zone *zone)
-{
-	return (!!zone->present_pages);
-}
-
-extern int movable_zone;
-
-static inline int zone_movable_is_highmem(void)
-{
-#if defined(CONFIG_HIGHMEM) && defined(CONFIG_HAVE_MEMBLOCK_NODE)
-	return movable_zone == ZONE_HIGHMEM;
-#else
-	return 0;
-#endif
-}
-
-static inline int is_highmem_idx(enum zone_type idx)
-{
-#ifdef CONFIG_HIGHMEM
-	return (idx == ZONE_HIGHMEM ||
-		(idx == ZONE_MOVABLE && zone_movable_is_highmem()));
-#else
-	return 0;
-#endif
-}
-
-static inline int is_normal_idx(enum zone_type idx)
-{
-	return (idx == ZONE_NORMAL);
-}
-
-/**
- * is_highmem - helper function to quickly check if a struct zone is a 
- *              highmem zone or not.  This is an attempt to keep references
- *              to ZONE_{DMA/NORMAL/HIGHMEM/etc} in general code to a minimum.
- * @zone - pointer to struct zone variable
- */
-static inline int is_highmem(struct zone *zone)
-{
-#ifdef CONFIG_HIGHMEM
-	int zone_off = (char *)zone - (char *)zone->zone_pgdat->node_zones;
-	return zone_off == ZONE_HIGHMEM * sizeof(*zone) ||
-	       (zone_off == ZONE_MOVABLE * sizeof(*zone) &&
-		zone_movable_is_highmem());
-#else
-	return 0;
-#endif
-}
-
-static inline int is_normal(struct zone *zone)
-{
-	return zone == zone->zone_pgdat->node_zones + ZONE_NORMAL;
-}
-
-static inline int is_dma32(struct zone *zone)
-{
-#ifdef CONFIG_ZONE_DMA32
-	return zone == zone->zone_pgdat->node_zones + ZONE_DMA32;
-#else
-	return 0;
-#endif
-}
-
-static inline int is_dma(struct zone *zone)
-{
-#ifdef CONFIG_ZONE_DMA
-	return zone == zone->zone_pgdat->node_zones + ZONE_DMA;
-#else
-	return 0;
-#endif
-}
-
-/* These two functions are used to setup the per zone pages min values */
-struct ctl_table;
-int min_free_kbytes_sysctl_handler(struct ctl_table *, int,
-					void __user *, size_t *, loff_t *);
-extern int sysctl_lowmem_reserve_ratio[MAX_NR_ZONES-1];
-int lowmem_reserve_ratio_sysctl_handler(struct ctl_table *, int,
-					void __user *, size_t *, loff_t *);
-int percpu_pagelist_fraction_sysctl_handler(struct ctl_table *, int,
-					void __user *, size_t *, loff_t *);
-int sysctl_min_unmapped_ratio_sysctl_handler(struct ctl_table *, int,
-			void __user *, size_t *, loff_t *);
-int sysctl_min_slab_ratio_sysctl_handler(struct ctl_table *, int,
-			void __user *, size_t *, loff_t *);
-
-extern int numa_zonelist_order_handler(struct ctl_table *, int,
-			void __user *, size_t *, loff_t *);
-extern char numa_zonelist_order[];
-#define NUMA_ZONELIST_ORDER_LEN 16	/* string buffer size */
-
-#ifndef CONFIG_NEED_MULTIPLE_NODES
-
-extern struct pglist_data contig_page_data;
-#define NODE_DATA(nid)		(&contig_page_data)
-#define NODE_MEM_MAP(nid)	mem_map
-
-#else /* CONFIG_NEED_MULTIPLE_NODES */
-
-#include <asm/mmzone.h>
-
-#endif /* !CONFIG_NEED_MULTIPLE_NODES */
-
-extern struct pglist_data *first_online_pgdat(void);
-extern struct pglist_data *next_online_pgdat(struct pglist_data *pgdat);
-extern struct zone *next_zone(struct zone *zone);
-
-/**
- * for_each_online_pgdat - helper macro to iterate over all online nodes
- * @pgdat - pointer to a pg_data_t variable
- */
-#define for_each_online_pgdat(pgdat)			\
-	for (pgdat = first_online_pgdat();		\
-	     pgdat;					\
-	     pgdat = next_online_pgdat(pgdat))
-/**
- * for_each_zone - helper macro to iterate over all memory zones
- * @zone - pointer to struct zone variable
- *
- * The user only needs to declare the zone variable, for_each_zone
- * fills it in.
- */
-#define for_each_zone(zone)			        \
-	for (zone = (first_online_pgdat())->node_zones; \
-	     zone;					\
-	     zone = next_zone(zone))
-
-#define for_each_populated_zone(zone)		        \
-	for (zone = (first_online_pgdat())->node_zones; \
-	     zone;					\
-	     zone = next_zone(zone))			\
-		if (!populated_zone(zone))		\
-			; /* do nothing */		\
-		else
-
-static inline struct zone *zonelist_zone(struct zoneref *zoneref)
-{
-	return zoneref->zone;
-}
-
-static inline int zonelist_zone_idx(struct zoneref *zoneref)
-{
-	return zoneref->zone_idx;
-}
-
-static inline int zonelist_node_idx(struct zoneref *zoneref)
-{
-#ifdef CONFIG_NUMA
-	/* zone_to_nid not available in this context */
-	return zoneref->zone->node;
-#else
-	return 0;
-#endif /* CONFIG_NUMA */
-}
-
-/**
- * next_zones_zonelist - Returns the next zone at or below highest_zoneidx within the allowed nodemask using a cursor within a zonelist as a starting point
- * @z - The cursor used as a starting point for the search
- * @highest_zoneidx - The zone index of the highest zone to return
- * @nodes - An optional nodemask to filter the zonelist with
- * @zone - The first suitable zone found is returned via this parameter
- *
- * This function returns the next zone at or below a given zone index that is
- * within the allowed nodemask using a cursor as the starting point for the
- * search. The zoneref returned is a cursor that represents the current zone
- * being examined. It should be advanced by one before calling
- * next_zones_zonelist again.
- */
-struct zoneref *next_zones_zonelist(struct zoneref *z,
-					enum zone_type highest_zoneidx,
-					nodemask_t *nodes,
-					struct zone **zone);
-
-/**
- * first_zones_zonelist - Returns the first zone at or below highest_zoneidx within the allowed nodemask in a zonelist
- * @zonelist - The zonelist to search for a suitable zone
- * @highest_zoneidx - The zone index of the highest zone to return
- * @nodes - An optional nodemask to filter the zonelist with
- * @zone - The first suitable zone found is returned via this parameter
- *
- * This function returns the first zone at or below a given zone index that is
- * within the allowed nodemask. The zoneref returned is a cursor that can be
- * used to iterate the zonelist with next_zones_zonelist by advancing it by
- * one before calling.
- */
-static inline struct zoneref *first_zones_zonelist(struct zonelist *zonelist,
-					enum zone_type highest_zoneidx,
-					nodemask_t *nodes,
-					struct zone **zone)
-{
-	return next_zones_zonelist(zonelist->_zonerefs, highest_zoneidx, nodes,
-								zone);
-}
-
-/**
- * for_each_zone_zonelist_nodemask - helper macro to iterate over valid zones in a zonelist at or below a given zone index and within a nodemask
- * @zone - The current zone in the iterator
- * @z - The current pointer within zonelist->zones being iterated
- * @zlist - The zonelist being iterated
- * @highidx - The zone index of the highest zone to return
- * @nodemask - Nodemask allowed by the allocator
- *
- * This iterator iterates though all zones at or below a given zone index and
- * within a given nodemask
- */
-#define for_each_zone_zonelist_nodemask(zone, z, zlist, highidx, nodemask) \
-	for (z = first_zones_zonelist(zlist, highidx, nodemask, &zone);	\
-		zone;							\
-		z = next_zones_zonelist(++z, highidx, nodemask, &zone))	\
-
-/**
- * for_each_zone_zonelist - helper macro to iterate over valid zones in a zonelist at or below a given zone index
- * @zone - The current zone in the iterator
- * @z - The current pointer within zonelist->zones being iterated
- * @zlist - The zonelist being iterated
- * @highidx - The zone index of the highest zone to return
- *
- * This iterator iterates though all zones at or below a given zone index.
- */
-#define for_each_zone_zonelist(zone, z, zlist, highidx) \
-	for_each_zone_zonelist_nodemask(zone, z, zlist, highidx, NULL)
-
-#ifdef CONFIG_SPARSEMEM
-#include <asm/sparsemem.h>
-#endif
-
-#if !defined(CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID) && \
-	!defined(CONFIG_HAVE_MEMBLOCK_NODE_MAP)
-static inline unsigned long early_pfn_to_nid(unsigned long pfn)
-{
-	return 0;
-}
-#endif
-
-#ifdef CONFIG_FLATMEM
-#define pfn_to_nid(pfn)		(0)
-#endif
-
-#ifdef CONFIG_SPARSEMEM
-
-/*
- * SECTION_SHIFT    		#bits space required to store a section #
- *
- * PA_SECTION_SHIFT		physical address to/from section number
- * PFN_SECTION_SHIFT		pfn to/from section number
- */
-#define SECTIONS_SHIFT		(MAX_PHYSMEM_BITS - SECTION_SIZE_BITS)
-
-#define PA_SECTION_SHIFT	(SECTION_SIZE_BITS)
-#define PFN_SECTION_SHIFT	(SECTION_SIZE_BITS - PAGE_SHIFT)
-
-#define NR_MEM_SECTIONS		(1UL << SECTIONS_SHIFT)
-
-#define PAGES_PER_SECTION       (1UL << PFN_SECTION_SHIFT)
-#define PAGE_SECTION_MASK	(~(PAGES_PER_SECTION-1))
-
-#define SECTION_BLOCKFLAGS_BITS \
-	((1UL << (PFN_SECTION_SHIFT - pageblock_order)) * NR_PAGEBLOCK_BITS)
-
-#if (MAX_ORDER - 1 + PAGE_SHIFT) > SECTION_SIZE_BITS
-#error Allocator MAX_ORDER exceeds SECTION_SIZE
-#endif
-
-#define pfn_to_section_nr(pfn) ((pfn) >> PFN_SECTION_SHIFT)
-#define section_nr_to_pfn(sec) ((sec) << PFN_SECTION_SHIFT)
-
-#define SECTION_ALIGN_UP(pfn)	(((pfn) + PAGES_PER_SECTION - 1) & PAGE_SECTION_MASK)
-#define SECTION_ALIGN_DOWN(pfn)	((pfn) & PAGE_SECTION_MASK)
-
-struct page;
-struct page_cgroup;
-struct mem_section {
-	/*
-	 * This is, logically, a pointer to an array of struct
-	 * pages.  However, it is stored with some other magic.
-	 * (see sparse.c::sparse_init_one_section())
-	 *
-	 * Additionally during early boot we encode node id of
-	 * the location of the section here to guide allocation.
-	 * (see sparse.c::memory_present())
-	 *
-	 * Making it a UL at least makes someone do a cast
-	 * before using it wrong.
-	 */
-	unsigned long section_mem_map;
-
-	/* See declaration of similar field in struct zone */
-	unsigned long *pageblock_flags;
-#ifdef CONFIG_CGROUP_MEM_RES_CTLR
-	/*
-	 * If !SPARSEMEM, pgdat doesn't have page_cgroup pointer. We use
-	 * section. (see memcontrol.h/page_cgroup.h about this.)
-	 */
-	struct page_cgroup *page_cgroup;
-	unsigned long pad;
-#endif
-};
-
-#ifdef CONFIG_SPARSEMEM_EXTREME
-#define SECTIONS_PER_ROOT       (PAGE_SIZE / sizeof (struct mem_section))
-#else
-#define SECTIONS_PER_ROOT	1
-#endif
-
-#define SECTION_NR_TO_ROOT(sec)	((sec) / SECTIONS_PER_ROOT)
-#define NR_SECTION_ROOTS	DIV_ROUND_UP(NR_MEM_SECTIONS, SECTIONS_PER_ROOT)
-#define SECTION_ROOT_MASK	(SECTIONS_PER_ROOT - 1)
-
-#ifdef CONFIG_SPARSEMEM_EXTREME
-extern struct mem_section *mem_section[NR_SECTION_ROOTS];
-#else
-extern struct mem_section mem_section[NR_SECTION_ROOTS][SECTIONS_PER_ROOT];
-#endif
-
-static inline struct mem_section *__nr_to_section(unsigned long nr)
-{
-	if (!mem_section[SECTION_NR_TO_ROOT(nr)])
-		return NULL;
-	return &mem_section[SECTION_NR_TO_ROOT(nr)][nr & SECTION_ROOT_MASK];
-}
-extern int __section_nr(struct mem_section* ms);
-extern unsigned long usemap_size(void);
-
-/*
- * We use the lower bits of the mem_map pointer to store
- * a little bit of information.  There should be at least
- * 3 bits here due to 32-bit alignment.
- */
-#define	SECTION_MARKED_PRESENT	(1UL<<0)
-#define SECTION_HAS_MEM_MAP	(1UL<<1)
-#define SECTION_MAP_LAST_BIT	(1UL<<2)
-#define SECTION_MAP_MASK	(~(SECTION_MAP_LAST_BIT-1))
-#define SECTION_NID_SHIFT	2
-
-static inline struct page *__section_mem_map_addr(struct mem_section *section)
-{
-	unsigned long map = section->section_mem_map;
-	map &= SECTION_MAP_MASK;
-	return (struct page *)map;
-}
-
-static inline int present_section(struct mem_section *section)
-{
-	return (section && (section->section_mem_map & SECTION_MARKED_PRESENT));
-}
-
-static inline int present_section_nr(unsigned long nr)
-{
-	return present_section(__nr_to_section(nr));
-}
-
-static inline int valid_section(struct mem_section *section)
-{
-	return (section && (section->section_mem_map & SECTION_HAS_MEM_MAP));
-}
-
-static inline int valid_section_nr(unsigned long nr)
-{
-	return valid_section(__nr_to_section(nr));
-}
-
-static inline struct mem_section *__pfn_to_section(unsigned long pfn)
-{
-	return __nr_to_section(pfn_to_section_nr(pfn));
-}
-
-#ifndef CONFIG_HAVE_ARCH_PFN_VALID
-static inline int pfn_valid(unsigned long pfn)
-{
-	if (pfn_to_section_nr(pfn) >= NR_MEM_SECTIONS)
-		return 0;
-	return valid_section(__nr_to_section(pfn_to_section_nr(pfn)));
-}
-#endif
-
-static inline int pfn_present(unsigned long pfn)
-{
-	if (pfn_to_section_nr(pfn) >= NR_MEM_SECTIONS)
-		return 0;
-	return present_section(__nr_to_section(pfn_to_section_nr(pfn)));
-}
-
-/*
- * These are _only_ used during initialisation, therefore they
- * can use __initdata ...  They could have names to indicate
- * this restriction.
- */
-#ifdef CONFIG_NUMA
-#define pfn_to_nid(pfn)							\
-({									\
-	unsigned long __pfn_to_nid_pfn = (pfn);				\
-	page_to_nid(pfn_to_page(__pfn_to_nid_pfn));			\
-})
-#else
-#define pfn_to_nid(pfn)		(0)
-#endif
-
-#define early_pfn_valid(pfn)	pfn_valid(pfn)
-void sparse_init(void);
-#else
-#define sparse_init()	do {} while (0)
-#define sparse_index_init(_sec, _nid)  do {} while (0)
-#endif /* CONFIG_SPARSEMEM */
-
-#ifdef CONFIG_NODES_SPAN_OTHER_NODES
-bool early_pfn_in_nid(unsigned long pfn, int nid);
-#else
-#define early_pfn_in_nid(pfn, nid)	(1)
-#endif
-
-#ifndef early_pfn_valid
-#define early_pfn_valid(pfn)	(1)
-#endif
-
-void memory_present(int nid, unsigned long start, unsigned long end);
-unsigned long __init node_memmap_size_bytes(int, unsigned long, unsigned long);
-
-/*
- * If it is possible to have holes within a MAX_ORDER_NR_PAGES, then we
- * need to check pfn validility within that MAX_ORDER_NR_PAGES block.
- * pfn_valid_within() should be used in this case; we optimise this away
- * when we have no holes within a MAX_ORDER_NR_PAGES block.
- */
-#ifdef CONFIG_HOLES_IN_ZONE
-#define pfn_valid_within(pfn) pfn_valid(pfn)
-#else
-#define pfn_valid_within(pfn) (1)
-#endif
-
-#ifdef CONFIG_ARCH_HAS_HOLES_MEMORYMODEL
-/*
- * pfn_valid() is meant to be able to tell if a given PFN has valid memmap
- * associated with it or not. In FLATMEM, it is expected that holes always
- * have valid memmap as long as there is valid PFNs either side of the hole.
- * In SPARSEMEM, it is assumed that a valid section has a memmap for the
- * entire section.
- *
- * However, an ARM, and maybe other embedded architectures in the future
- * free memmap backing holes to save memory on the assumption the memmap is
- * never used. The page_zone linkages are then broken even though pfn_valid()
- * returns true. A walker of the full memmap must then do this additional
- * check to ensure the memmap they are looking at is sane by making sure
- * the zone and PFN linkages are still valid. This is expensive, but walkers
- * of the full memmap are extremely rare.
- */
-int memmap_valid_within(unsigned long pfn,
-					struct page *page, struct zone *zone);
-#else
-static inline int memmap_valid_within(unsigned long pfn,
-					struct page *page, struct zone *zone)
-{
-	return 1;
-}
-#endif /* CONFIG_ARCH_HAS_HOLES_MEMORYMODEL */
-
-#endif /* !__GENERATING_BOUNDS.H */
-#endif /* !__ASSEMBLY__ */
-#endif /* _LINUX_MMZONE_H */
diff --git a/ANDROID_3.4.5/include/linux/mnt_namespace.h b/ANDROID_3.4.5/include/linux/mnt_namespace.h
deleted file mode 100644
index 5a8e3903..00000000
--- a/ANDROID_3.4.5/include/linux/mnt_namespace.h
+++ /dev/null
@@ -1,17 +0,0 @@
-#ifndef _NAMESPACE_H_
-#define _NAMESPACE_H_
-#ifdef __KERNEL__
-
-struct mnt_namespace;
-struct fs_struct;
-
-extern struct mnt_namespace *copy_mnt_ns(unsigned long, struct mnt_namespace *,
-		struct fs_struct *);
-extern void put_mnt_ns(struct mnt_namespace *ns);
-
-extern const struct file_operations proc_mounts_operations;
-extern const struct file_operations proc_mountinfo_operations;
-extern const struct file_operations proc_mountstats_operations;
-
-#endif
-#endif
diff --git a/ANDROID_3.4.5/include/linux/mod_devicetable.h b/ANDROID_3.4.5/include/linux/mod_devicetable.h
deleted file mode 100644
index 501da4cb..00000000
--- a/ANDROID_3.4.5/include/linux/mod_devicetable.h
+++ /dev/null
@@ -1,593 +0,0 @@
-/*
- * Device tables which are exported to userspace via
- * scripts/mod/file2alias.c.  You must keep that file in sync with this
- * header.
- */
-
-#ifndef LINUX_MOD_DEVICETABLE_H
-#define LINUX_MOD_DEVICETABLE_H
-
-#ifdef __KERNEL__
-#include <linux/types.h>
-typedef unsigned long kernel_ulong_t;
-#endif
-
-#define PCI_ANY_ID (~0)
-
-struct pci_device_id {
-	__u32 vendor, device;		/* Vendor and device ID or PCI_ANY_ID*/
-	__u32 subvendor, subdevice;	/* Subsystem ID's or PCI_ANY_ID */
-	__u32 class, class_mask;	/* (class,subclass,prog-if) triplet */
-	kernel_ulong_t driver_data;	/* Data private to the driver */
-};
-
-
-#define IEEE1394_MATCH_VENDOR_ID	0x0001
-#define IEEE1394_MATCH_MODEL_ID		0x0002
-#define IEEE1394_MATCH_SPECIFIER_ID	0x0004
-#define IEEE1394_MATCH_VERSION		0x0008
-
-struct ieee1394_device_id {
-	__u32 match_flags;
-	__u32 vendor_id;
-	__u32 model_id;
-	__u32 specifier_id;
-	__u32 version;
-	kernel_ulong_t driver_data
-		__attribute__((aligned(sizeof(kernel_ulong_t))));
-};
-
-
-/*
- * Device table entry for "new style" table-driven USB drivers.
- * User mode code can read these tables to choose which modules to load.
- * Declare the table as a MODULE_DEVICE_TABLE.
- *
- * A probe() parameter will point to a matching entry from this table.
- * Use the driver_info field for each match to hold information tied
- * to that match:  device quirks, etc.
- *
- * Terminate the driver's table with an all-zeroes entry.
- * Use the flag values to control which fields are compared.
- */
-
-/**
- * struct usb_device_id - identifies USB devices for probing and hotplugging
- * @match_flags: Bit mask controlling of the other fields are used to match
- *	against new devices.  Any field except for driver_info may be used,
- *	although some only make sense in conjunction with other fields.
- *	This is usually set by a USB_DEVICE_*() macro, which sets all
- *	other fields in this structure except for driver_info.
- * @idVendor: USB vendor ID for a device; numbers are assigned
- *	by the USB forum to its members.
- * @idProduct: Vendor-assigned product ID.
- * @bcdDevice_lo: Low end of range of vendor-assigned product version numbers.
- *	This is also used to identify individual product versions, for
- *	a range consisting of a single device.
- * @bcdDevice_hi: High end of version number range.  The range of product
- *	versions is inclusive.
- * @bDeviceClass: Class of device; numbers are assigned
- *	by the USB forum.  Products may choose to implement classes,
- *	or be vendor-specific.  Device classes specify behavior of all
- *	the interfaces on a devices.
- * @bDeviceSubClass: Subclass of device; associated with bDeviceClass.
- * @bDeviceProtocol: Protocol of device; associated with bDeviceClass.
- * @bInterfaceClass: Class of interface; numbers are assigned
- *	by the USB forum.  Products may choose to implement classes,
- *	or be vendor-specific.  Interface classes specify behavior only
- *	of a given interface; other interfaces may support other classes.
- * @bInterfaceSubClass: Subclass of interface; associated with bInterfaceClass.
- * @bInterfaceProtocol: Protocol of interface; associated with bInterfaceClass.
- * @driver_info: Holds information used by the driver.  Usually it holds
- *	a pointer to a descriptor understood by the driver, or perhaps
- *	device flags.
- *
- * In most cases, drivers will create a table of device IDs by using
- * USB_DEVICE(), or similar macros designed for that purpose.
- * They will then export it to userspace using MODULE_DEVICE_TABLE(),
- * and provide it to the USB core through their usb_driver structure.
- *
- * See the usb_match_id() function for information about how matches are
- * performed.  Briefly, you will normally use one of several macros to help
- * construct these entries.  Each entry you provide will either identify
- * one or more specific products, or will identify a class of products
- * which have agreed to behave the same.  You should put the more specific
- * matches towards the beginning of your table, so that driver_info can
- * record quirks of specific products.
- */
-struct usb_device_id {
-	/* which fields to match against? */
-	__u16		match_flags;
-
-	/* Used for product specific matches; range is inclusive */
-	__u16		idVendor;
-	__u16		idProduct;
-	__u16		bcdDevice_lo;
-	__u16		bcdDevice_hi;
-
-	/* Used for device class matches */
-	__u8		bDeviceClass;
-	__u8		bDeviceSubClass;
-	__u8		bDeviceProtocol;
-
-	/* Used for interface class matches */
-	__u8		bInterfaceClass;
-	__u8		bInterfaceSubClass;
-	__u8		bInterfaceProtocol;
-
-	/* not matched against */
-	kernel_ulong_t	driver_info;
-};
-
-/* Some useful macros to use to create struct usb_device_id */
-#define USB_DEVICE_ID_MATCH_VENDOR		0x0001
-#define USB_DEVICE_ID_MATCH_PRODUCT		0x0002
-#define USB_DEVICE_ID_MATCH_DEV_LO		0x0004
-#define USB_DEVICE_ID_MATCH_DEV_HI		0x0008
-#define USB_DEVICE_ID_MATCH_DEV_CLASS		0x0010
-#define USB_DEVICE_ID_MATCH_DEV_SUBCLASS	0x0020
-#define USB_DEVICE_ID_MATCH_DEV_PROTOCOL	0x0040
-#define USB_DEVICE_ID_MATCH_INT_CLASS		0x0080
-#define USB_DEVICE_ID_MATCH_INT_SUBCLASS	0x0100
-#define USB_DEVICE_ID_MATCH_INT_PROTOCOL	0x0200
-
-#define HID_ANY_ID				(~0)
-
-struct hid_device_id {
-	__u16 bus;
-	__u16 pad1;
-	__u32 vendor;
-	__u32 product;
-	kernel_ulong_t driver_data
-		__attribute__((aligned(sizeof(kernel_ulong_t))));
-};
-
-/* s390 CCW devices */
-struct ccw_device_id {
-	__u16	match_flags;	/* which fields to match against */
-
-	__u16	cu_type;	/* control unit type     */
-	__u16	dev_type;	/* device type           */
-	__u8	cu_model;	/* control unit model    */
-	__u8	dev_model;	/* device model          */
-
-	kernel_ulong_t driver_info;
-};
-
-#define CCW_DEVICE_ID_MATCH_CU_TYPE		0x01
-#define CCW_DEVICE_ID_MATCH_CU_MODEL		0x02
-#define CCW_DEVICE_ID_MATCH_DEVICE_TYPE		0x04
-#define CCW_DEVICE_ID_MATCH_DEVICE_MODEL	0x08
-
-/* s390 AP bus devices */
-struct ap_device_id {
-	__u16 match_flags;	/* which fields to match against */
-	__u8 dev_type;		/* device type */
-	__u8 pad1;
-	__u32 pad2;
-	kernel_ulong_t driver_info;
-};
-
-#define AP_DEVICE_ID_MATCH_DEVICE_TYPE		0x01
-
-/* s390 css bus devices (subchannels) */
-struct css_device_id {
-	__u8 match_flags;
-	__u8 type; /* subchannel type */
-	__u16 pad2;
-	__u32 pad3;
-	kernel_ulong_t driver_data;
-};
-
-#define ACPI_ID_LEN	16 /* only 9 bytes needed here, 16 bytes are used */
-			   /* to workaround crosscompile issues */
-
-struct acpi_device_id {
-	__u8 id[ACPI_ID_LEN];
-	kernel_ulong_t driver_data;
-};
-
-#define PNP_ID_LEN	8
-#define PNP_MAX_DEVICES	8
-
-struct pnp_device_id {
-	__u8 id[PNP_ID_LEN];
-	kernel_ulong_t driver_data;
-};
-
-struct pnp_card_device_id {
-	__u8 id[PNP_ID_LEN];
-	kernel_ulong_t driver_data;
-	struct {
-		__u8 id[PNP_ID_LEN];
-	} devs[PNP_MAX_DEVICES];
-};
-
-
-#define SERIO_ANY	0xff
-
-struct serio_device_id {
-	__u8 type;
-	__u8 extra;
-	__u8 id;
-	__u8 proto;
-};
-
-/*
- * Struct used for matching a device
- */
-struct of_device_id
-{
-	char	name[32];
-	char	type[32];
-	char	compatible[128];
-#ifdef __KERNEL__
-	void	*data;
-#else
-	kernel_ulong_t data;
-#endif
-};
-
-/* VIO */
-struct vio_device_id {
-	char type[32];
-	char compat[32];
-};
-
-/* PCMCIA */
-
-struct pcmcia_device_id {
-	__u16		match_flags;
-
-	__u16		manf_id;
-	__u16 		card_id;
-
-	__u8  		func_id;
-
-	/* for real multi-function devices */
-	__u8  		function;
-
-	/* for pseudo multi-function devices */
-	__u8  		device_no;
-
-	__u32 		prod_id_hash[4]
-		__attribute__((aligned(sizeof(__u32))));
-
-	/* not matched against in kernelspace*/
-#ifdef __KERNEL__
-	const char *	prod_id[4];
-#else
-	kernel_ulong_t	prod_id[4]
-		__attribute__((aligned(sizeof(kernel_ulong_t))));
-#endif
-
-	/* not matched against */
-	kernel_ulong_t	driver_info;
-#ifdef __KERNEL__
-	char *		cisfile;
-#else
-	kernel_ulong_t	cisfile;
-#endif
-};
-
-#define PCMCIA_DEV_ID_MATCH_MANF_ID	0x0001
-#define PCMCIA_DEV_ID_MATCH_CARD_ID	0x0002
-#define PCMCIA_DEV_ID_MATCH_FUNC_ID	0x0004
-#define PCMCIA_DEV_ID_MATCH_FUNCTION	0x0008
-#define PCMCIA_DEV_ID_MATCH_PROD_ID1	0x0010
-#define PCMCIA_DEV_ID_MATCH_PROD_ID2	0x0020
-#define PCMCIA_DEV_ID_MATCH_PROD_ID3	0x0040
-#define PCMCIA_DEV_ID_MATCH_PROD_ID4	0x0080
-#define PCMCIA_DEV_ID_MATCH_DEVICE_NO	0x0100
-#define PCMCIA_DEV_ID_MATCH_FAKE_CIS	0x0200
-#define PCMCIA_DEV_ID_MATCH_ANONYMOUS	0x0400
-
-/* Input */
-#define INPUT_DEVICE_ID_EV_MAX		0x1f
-#define INPUT_DEVICE_ID_KEY_MIN_INTERESTING	0x71
-#define INPUT_DEVICE_ID_KEY_MAX		0x2ff
-#define INPUT_DEVICE_ID_REL_MAX		0x0f
-#define INPUT_DEVICE_ID_ABS_MAX		0x3f
-#define INPUT_DEVICE_ID_MSC_MAX		0x07
-#define INPUT_DEVICE_ID_LED_MAX		0x0f
-#define INPUT_DEVICE_ID_SND_MAX		0x07
-#define INPUT_DEVICE_ID_FF_MAX		0x7f
-#define INPUT_DEVICE_ID_SW_MAX		0x0f
-
-#define INPUT_DEVICE_ID_MATCH_BUS	1
-#define INPUT_DEVICE_ID_MATCH_VENDOR	2
-#define INPUT_DEVICE_ID_MATCH_PRODUCT	4
-#define INPUT_DEVICE_ID_MATCH_VERSION	8
-
-#define INPUT_DEVICE_ID_MATCH_EVBIT	0x0010
-#define INPUT_DEVICE_ID_MATCH_KEYBIT	0x0020
-#define INPUT_DEVICE_ID_MATCH_RELBIT	0x0040
-#define INPUT_DEVICE_ID_MATCH_ABSBIT	0x0080
-#define INPUT_DEVICE_ID_MATCH_MSCIT	0x0100
-#define INPUT_DEVICE_ID_MATCH_LEDBIT	0x0200
-#define INPUT_DEVICE_ID_MATCH_SNDBIT	0x0400
-#define INPUT_DEVICE_ID_MATCH_FFBIT	0x0800
-#define INPUT_DEVICE_ID_MATCH_SWBIT	0x1000
-
-struct input_device_id {
-
-	kernel_ulong_t flags;
-
-	__u16 bustype;
-	__u16 vendor;
-	__u16 product;
-	__u16 version;
-
-	kernel_ulong_t evbit[INPUT_DEVICE_ID_EV_MAX / BITS_PER_LONG + 1];
-	kernel_ulong_t keybit[INPUT_DEVICE_ID_KEY_MAX / BITS_PER_LONG + 1];
-	kernel_ulong_t relbit[INPUT_DEVICE_ID_REL_MAX / BITS_PER_LONG + 1];
-	kernel_ulong_t absbit[INPUT_DEVICE_ID_ABS_MAX / BITS_PER_LONG + 1];
-	kernel_ulong_t mscbit[INPUT_DEVICE_ID_MSC_MAX / BITS_PER_LONG + 1];
-	kernel_ulong_t ledbit[INPUT_DEVICE_ID_LED_MAX / BITS_PER_LONG + 1];
-	kernel_ulong_t sndbit[INPUT_DEVICE_ID_SND_MAX / BITS_PER_LONG + 1];
-	kernel_ulong_t ffbit[INPUT_DEVICE_ID_FF_MAX / BITS_PER_LONG + 1];
-	kernel_ulong_t swbit[INPUT_DEVICE_ID_SW_MAX / BITS_PER_LONG + 1];
-
-	kernel_ulong_t driver_info;
-};
-
-/* EISA */
-
-#define EISA_SIG_LEN   8
-
-/* The EISA signature, in ASCII form, null terminated */
-struct eisa_device_id {
-	char          sig[EISA_SIG_LEN];
-	kernel_ulong_t driver_data;
-};
-
-#define EISA_DEVICE_MODALIAS_FMT "eisa:s%s"
-
-struct parisc_device_id {
-	__u8	hw_type;	/* 5 bits used */
-	__u8	hversion_rev;	/* 4 bits */
-	__u16	hversion;	/* 12 bits */
-	__u32	sversion;	/* 20 bits */
-};
-
-#define PA_HWTYPE_ANY_ID	0xff
-#define PA_HVERSION_REV_ANY_ID	0xff
-#define PA_HVERSION_ANY_ID	0xffff
-#define PA_SVERSION_ANY_ID	0xffffffff
-
-/* SDIO */
-
-#define SDIO_ANY_ID (~0)
-
-struct sdio_device_id {
-	__u8	class;			/* Standard interface or SDIO_ANY_ID */
-	__u16	vendor;			/* Vendor or SDIO_ANY_ID */
-	__u16	device;			/* Device ID or SDIO_ANY_ID */
-	kernel_ulong_t driver_data	/* Data private to the driver */
-		__attribute__((aligned(sizeof(kernel_ulong_t))));
-};
-
-/* SSB core, see drivers/ssb/ */
-struct ssb_device_id {
-	__u16	vendor;
-	__u16	coreid;
-	__u8	revision;
-};
-#define SSB_DEVICE(_vendor, _coreid, _revision)  \
-	{ .vendor = _vendor, .coreid = _coreid, .revision = _revision, }
-#define SSB_DEVTABLE_END  \
-	{ 0, },
-
-#define SSB_ANY_VENDOR		0xFFFF
-#define SSB_ANY_ID		0xFFFF
-#define SSB_ANY_REV		0xFF
-
-/* Broadcom's specific AMBA core, see drivers/bcma/ */
-struct bcma_device_id {
-	__u16	manuf;
-	__u16	id;
-	__u8	rev;
-	__u8	class;
-};
-#define BCMA_CORE(_manuf, _id, _rev, _class)  \
-	{ .manuf = _manuf, .id = _id, .rev = _rev, .class = _class, }
-#define BCMA_CORETABLE_END  \
-	{ 0, },
-
-#define BCMA_ANY_MANUF		0xFFFF
-#define BCMA_ANY_ID		0xFFFF
-#define BCMA_ANY_REV		0xFF
-#define BCMA_ANY_CLASS		0xFF
-
-struct virtio_device_id {
-	__u32 device;
-	__u32 vendor;
-};
-#define VIRTIO_DEV_ANY_ID	0xffffffff
-
-/*
- * For Hyper-V devices we use the device guid as the id.
- */
-struct hv_vmbus_device_id {
-	__u8 guid[16];
-	kernel_ulong_t driver_data	/* Data private to the driver */
-			__attribute__((aligned(sizeof(kernel_ulong_t))));
-};
-
-/* rpmsg */
-
-#define RPMSG_NAME_SIZE			32
-#define RPMSG_DEVICE_MODALIAS_FMT	"rpmsg:%s"
-
-struct rpmsg_device_id {
-	char name[RPMSG_NAME_SIZE];
-};
-
-/* i2c */
-
-#define I2C_NAME_SIZE	20
-#define I2C_MODULE_PREFIX "i2c:"
-
-struct i2c_device_id {
-	char name[I2C_NAME_SIZE];
-	kernel_ulong_t driver_data	/* Data private to the driver */
-			__attribute__((aligned(sizeof(kernel_ulong_t))));
-};
-
-/* spi */
-
-#define SPI_NAME_SIZE	32
-#define SPI_MODULE_PREFIX "spi:"
-
-struct spi_device_id {
-	char name[SPI_NAME_SIZE];
-	kernel_ulong_t driver_data	/* Data private to the driver */
-			__attribute__((aligned(sizeof(kernel_ulong_t))));
-};
-
-/* dmi */
-enum dmi_field {
-	DMI_NONE,
-	DMI_BIOS_VENDOR,
-	DMI_BIOS_VERSION,
-	DMI_BIOS_DATE,
-	DMI_SYS_VENDOR,
-	DMI_PRODUCT_NAME,
-	DMI_PRODUCT_VERSION,
-	DMI_PRODUCT_SERIAL,
-	DMI_PRODUCT_UUID,
-	DMI_BOARD_VENDOR,
-	DMI_BOARD_NAME,
-	DMI_BOARD_VERSION,
-	DMI_BOARD_SERIAL,
-	DMI_BOARD_ASSET_TAG,
-	DMI_CHASSIS_VENDOR,
-	DMI_CHASSIS_TYPE,
-	DMI_CHASSIS_VERSION,
-	DMI_CHASSIS_SERIAL,
-	DMI_CHASSIS_ASSET_TAG,
-	DMI_STRING_MAX,
-};
-
-struct dmi_strmatch {
-	unsigned char slot;
-	char substr[79];
-};
-
-#ifndef __KERNEL__
-struct dmi_system_id {
-	kernel_ulong_t callback;
-	kernel_ulong_t ident;
-	struct dmi_strmatch matches[4];
-	kernel_ulong_t driver_data
-			__attribute__((aligned(sizeof(kernel_ulong_t))));
-};
-#else
-struct dmi_system_id {
-	int (*callback)(const struct dmi_system_id *);
-	const char *ident;
-	struct dmi_strmatch matches[4];
-	void *driver_data;
-};
-/*
- * struct dmi_device_id appears during expansion of
- * "MODULE_DEVICE_TABLE(dmi, x)". Compiler doesn't look inside it
- * but this is enough for gcc 3.4.6 to error out:
- *	error: storage size of '__mod_dmi_device_table' isn't known
- */
-#define dmi_device_id dmi_system_id
-#endif
-
-#define DMI_MATCH(a, b)	{ a, b }
-
-#define PLATFORM_NAME_SIZE	20
-#define PLATFORM_MODULE_PREFIX	"platform:"
-
-struct platform_device_id {
-	char name[PLATFORM_NAME_SIZE];
-	kernel_ulong_t driver_data
-			__attribute__((aligned(sizeof(kernel_ulong_t))));
-};
-
-#define MDIO_MODULE_PREFIX	"mdio:"
-
-#define MDIO_ID_FMT "%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d"
-#define MDIO_ID_ARGS(_id) \
-	(_id)>>31, ((_id)>>30) & 1, ((_id)>>29) & 1, ((_id)>>28) & 1,	\
-	((_id)>>27) & 1, ((_id)>>26) & 1, ((_id)>>25) & 1, ((_id)>>24) & 1, \
-	((_id)>>23) & 1, ((_id)>>22) & 1, ((_id)>>21) & 1, ((_id)>>20) & 1, \
-	((_id)>>19) & 1, ((_id)>>18) & 1, ((_id)>>17) & 1, ((_id)>>16) & 1, \
-	((_id)>>15) & 1, ((_id)>>14) & 1, ((_id)>>13) & 1, ((_id)>>12) & 1, \
-	((_id)>>11) & 1, ((_id)>>10) & 1, ((_id)>>9) & 1, ((_id)>>8) & 1, \
-	((_id)>>7) & 1, ((_id)>>6) & 1, ((_id)>>5) & 1, ((_id)>>4) & 1, \
-	((_id)>>3) & 1, ((_id)>>2) & 1, ((_id)>>1) & 1, (_id) & 1
-
-/**
- * struct mdio_device_id - identifies PHY devices on an MDIO/MII bus
- * @phy_id: The result of
- *     (mdio_read(&MII_PHYSID1) << 16 | mdio_read(&PHYSID2)) & @phy_id_mask
- *     for this PHY type
- * @phy_id_mask: Defines the significant bits of @phy_id.  A value of 0
- *     is used to terminate an array of struct mdio_device_id.
- */
-struct mdio_device_id {
-	__u32 phy_id;
-	__u32 phy_id_mask;
-};
-
-struct zorro_device_id {
-	__u32 id;			/* Device ID or ZORRO_WILDCARD */
-	kernel_ulong_t driver_data;	/* Data private to the driver */
-};
-
-#define ZORRO_WILDCARD			(0xffffffff)	/* not official */
-
-#define ZORRO_DEVICE_MODALIAS_FMT	"zorro:i%08X"
-
-#define ISAPNP_ANY_ID		0xffff
-struct isapnp_device_id {
-	unsigned short card_vendor, card_device;
-	unsigned short vendor, function;
-	kernel_ulong_t driver_data;	/* data private to the driver */
-};
-
-/**
- * struct amba_id - identifies a device on an AMBA bus
- * @id: The significant bits if the hardware device ID
- * @mask: Bitmask specifying which bits of the id field are significant when
- *	matching.  A driver binds to a device when ((hardware device ID) & mask)
- *	== id.
- * @data: Private data used by the driver.
- */
-struct amba_id {
-	unsigned int		id;
-	unsigned int		mask;
-#ifndef __KERNEL__
-	kernel_ulong_t		data;
-#else
-	void			*data;
-#endif
-};
-
-/*
- * Match x86 CPUs for CPU specific drivers.
- * See documentation of "x86_match_cpu" for details.
- */
-
-struct x86_cpu_id {
-	__u16 vendor;
-	__u16 family;
-	__u16 model;
-	__u16 feature;	/* bit index */
-	kernel_ulong_t driver_data;
-};
-
-#define X86_FEATURE_MATCH(x) \
-	{ X86_VENDOR_ANY, X86_FAMILY_ANY, X86_MODEL_ANY, x }
-
-#define X86_VENDOR_ANY 0xffff
-#define X86_FAMILY_ANY 0
-#define X86_MODEL_ANY  0
-#define X86_FEATURE_ANY 0	/* Same as FPU, you can't test for that */
-
-#endif /* LINUX_MOD_DEVICETABLE_H */
diff --git a/ANDROID_3.4.5/include/linux/module.h b/ANDROID_3.4.5/include/linux/module.h
deleted file mode 100644
index fbcafe2e..00000000
--- a/ANDROID_3.4.5/include/linux/module.h
+++ /dev/null
@@ -1,651 +0,0 @@
-#ifndef _LINUX_MODULE_H
-#define _LINUX_MODULE_H
-/*
- * Dynamic loading of modules into the kernel.
- *
- * Rewritten by Richard Henderson <rth@tamu.edu> Dec 1996
- * Rewritten again by Rusty Russell, 2002
- */
-#include <linux/list.h>
-#include <linux/stat.h>
-#include <linux/compiler.h>
-#include <linux/cache.h>
-#include <linux/kmod.h>
-#include <linux/elf.h>
-#include <linux/stringify.h>
-#include <linux/kobject.h>
-#include <linux/moduleparam.h>
-#include <linux/tracepoint.h>
-#include <linux/export.h>
-
-#include <linux/percpu.h>
-#include <asm/module.h>
-
-/* Not Yet Implemented */
-#define MODULE_SUPPORTED_DEVICE(name)
-
-#define MODULE_NAME_LEN MAX_PARAM_PREFIX_LEN
-
-struct modversion_info
-{
-	unsigned long crc;
-	char name[MODULE_NAME_LEN];
-};
-
-struct module;
-
-struct module_kobject {
-	struct kobject kobj;
-	struct module *mod;
-	struct kobject *drivers_dir;
-	struct module_param_attrs *mp;
-};
-
-struct module_attribute {
-	struct attribute attr;
-	ssize_t (*show)(struct module_attribute *, struct module_kobject *,
-			char *);
-	ssize_t (*store)(struct module_attribute *, struct module_kobject *,
-			 const char *, size_t count);
-	void (*setup)(struct module *, const char *);
-	int (*test)(struct module *);
-	void (*free)(struct module *);
-};
-
-struct module_version_attribute {
-	struct module_attribute mattr;
-	const char *module_name;
-	const char *version;
-} __attribute__ ((__aligned__(sizeof(void *))));
-
-extern ssize_t __modver_version_show(struct module_attribute *,
-				     struct module_kobject *, char *);
-
-extern struct module_attribute module_uevent;
-
-/* These are either module local, or the kernel's dummy ones. */
-extern int init_module(void);
-extern void cleanup_module(void);
-
-/* Archs provide a method of finding the correct exception table. */
-struct exception_table_entry;
-
-const struct exception_table_entry *
-search_extable(const struct exception_table_entry *first,
-	       const struct exception_table_entry *last,
-	       unsigned long value);
-void sort_extable(struct exception_table_entry *start,
-		  struct exception_table_entry *finish);
-void sort_main_extable(void);
-void trim_init_extable(struct module *m);
-
-#ifdef MODULE
-#define MODULE_GENERIC_TABLE(gtype,name)			\
-extern const struct gtype##_id __mod_##gtype##_table		\
-  __attribute__ ((unused, alias(__stringify(name))))
-
-#else  /* !MODULE */
-#define MODULE_GENERIC_TABLE(gtype,name)
-#endif
-
-/* Generic info of form tag = "info" */
-#define MODULE_INFO(tag, info) __MODULE_INFO(tag, tag, info)
-
-/* For userspace: you can also call me... */
-#define MODULE_ALIAS(_alias) MODULE_INFO(alias, _alias)
-
-/*
- * The following license idents are currently accepted as indicating free
- * software modules
- *
- *	"GPL"				[GNU Public License v2 or later]
- *	"GPL v2"			[GNU Public License v2]
- *	"GPL and additional rights"	[GNU Public License v2 rights and more]
- *	"Dual BSD/GPL"			[GNU Public License v2
- *					 or BSD license choice]
- *	"Dual MIT/GPL"			[GNU Public License v2
- *					 or MIT license choice]
- *	"Dual MPL/GPL"			[GNU Public License v2
- *					 or Mozilla license choice]
- *
- * The following other idents are available
- *
- *	"Proprietary"			[Non free products]
- *
- * There are dual licensed components, but when running with Linux it is the
- * GPL that is relevant so this is a non issue. Similarly LGPL linked with GPL
- * is a GPL combined work.
- *
- * This exists for several reasons
- * 1.	So modinfo can show license info for users wanting to vet their setup 
- *	is free
- * 2.	So the community can ignore bug reports including proprietary modules
- * 3.	So vendors can do likewise based on their own policies
- */
-#define MODULE_LICENSE(_license) MODULE_INFO(license, _license)
-
-/*
- * Author(s), use "Name <email>" or just "Name", for multiple
- * authors use multiple MODULE_AUTHOR() statements/lines.
- */
-#define MODULE_AUTHOR(_author) MODULE_INFO(author, _author)
-  
-/* What your module does. */
-#define MODULE_DESCRIPTION(_description) MODULE_INFO(description, _description)
-
-#define MODULE_DEVICE_TABLE(type,name)		\
-  MODULE_GENERIC_TABLE(type##_device,name)
-
-/* Version of form [<epoch>:]<version>[-<extra-version>].
-   Or for CVS/RCS ID version, everything but the number is stripped.
-  <epoch>: A (small) unsigned integer which allows you to start versions
-           anew. If not mentioned, it's zero.  eg. "2:1.0" is after
-	   "1:2.0".
-  <version>: The <version> may contain only alphanumerics and the
-           character `.'.  Ordered by numeric sort for numeric parts,
-	   ascii sort for ascii parts (as per RPM or DEB algorithm).
-  <extraversion>: Like <version>, but inserted for local
-           customizations, eg "rh3" or "rusty1".
-
-  Using this automatically adds a checksum of the .c files and the
-  local headers in "srcversion".
-*/
-
-#if defined(MODULE) || !defined(CONFIG_SYSFS)
-#define MODULE_VERSION(_version) MODULE_INFO(version, _version)
-#else
-#define MODULE_VERSION(_version)					\
-	static struct module_version_attribute ___modver_attr = {	\
-		.mattr	= {						\
-			.attr	= {					\
-				.name	= "version",			\
-				.mode	= S_IRUGO,			\
-			},						\
-			.show	= __modver_version_show,		\
-		},							\
-		.module_name	= KBUILD_MODNAME,			\
-		.version	= _version,				\
-	};								\
-	static const struct module_version_attribute			\
-	__used __attribute__ ((__section__ ("__modver")))		\
-	* __moduleparam_const __modver_attr = &___modver_attr
-#endif
-
-/* Optional firmware file (or files) needed by the module
- * format is simply firmware file name.  Multiple firmware
- * files require multiple MODULE_FIRMWARE() specifiers */
-#define MODULE_FIRMWARE(_firmware) MODULE_INFO(firmware, _firmware)
-
-/* Given an address, look for it in the exception tables */
-const struct exception_table_entry *search_exception_tables(unsigned long add);
-
-struct notifier_block;
-
-#ifdef CONFIG_MODULES
-
-extern int modules_disabled; /* for sysctl */
-/* Get/put a kernel symbol (calls must be symmetric) */
-void *__symbol_get(const char *symbol);
-void *__symbol_get_gpl(const char *symbol);
-#define symbol_get(x) ((typeof(&x))(__symbol_get(MODULE_SYMBOL_PREFIX #x)))
-
-/* modules using other modules: kdb wants to see this. */
-struct module_use {
-	struct list_head source_list;
-	struct list_head target_list;
-	struct module *source, *target;
-};
-
-enum module_state
-{
-	MODULE_STATE_LIVE,
-	MODULE_STATE_COMING,
-	MODULE_STATE_GOING,
-};
-
-/**
- * struct module_ref - per cpu module reference counts
- * @incs: number of module get on this cpu
- * @decs: number of module put on this cpu
- *
- * We force an alignment on 8 or 16 bytes, so that alloc_percpu()
- * put @incs/@decs in same cache line, with no extra memory cost,
- * since alloc_percpu() is fine grained.
- */
-struct module_ref {
-	unsigned long incs;
-	unsigned long decs;
-} __attribute((aligned(2 * sizeof(unsigned long))));
-
-struct module
-{
-	enum module_state state;
-
-	/* Member of list of modules */
-	struct list_head list;
-
-	/* Unique handle for this module */
-	char name[MODULE_NAME_LEN];
-
-	/* Sysfs stuff. */
-	struct module_kobject mkobj;
-	struct module_attribute *modinfo_attrs;
-	const char *version;
-	const char *srcversion;
-	struct kobject *holders_dir;
-
-	/* Exported symbols */
-	const struct kernel_symbol *syms;
-	const unsigned long *crcs;
-	unsigned int num_syms;
-
-	/* Kernel parameters. */
-	struct kernel_param *kp;
-	unsigned int num_kp;
-
-	/* GPL-only exported symbols. */
-	unsigned int num_gpl_syms;
-	const struct kernel_symbol *gpl_syms;
-	const unsigned long *gpl_crcs;
-
-#ifdef CONFIG_UNUSED_SYMBOLS
-	/* unused exported symbols. */
-	const struct kernel_symbol *unused_syms;
-	const unsigned long *unused_crcs;
-	unsigned int num_unused_syms;
-
-	/* GPL-only, unused exported symbols. */
-	unsigned int num_unused_gpl_syms;
-	const struct kernel_symbol *unused_gpl_syms;
-	const unsigned long *unused_gpl_crcs;
-#endif
-
-	/* symbols that will be GPL-only in the near future. */
-	const struct kernel_symbol *gpl_future_syms;
-	const unsigned long *gpl_future_crcs;
-	unsigned int num_gpl_future_syms;
-
-	/* Exception table */
-	unsigned int num_exentries;
-	struct exception_table_entry *extable;
-
-	/* Startup function. */
-	int (*init)(void);
-
-	/* If this is non-NULL, vfree after init() returns */
-	void *module_init;
-
-	/* Here is the actual code + data, vfree'd on unload. */
-	void *module_core;
-
-	/* Here are the sizes of the init and core sections */
-	unsigned int init_size, core_size;
-
-	/* The size of the executable code in each section.  */
-	unsigned int init_text_size, core_text_size;
-
-	/* Size of RO sections of the module (text+rodata) */
-	unsigned int init_ro_size, core_ro_size;
-
-	/* Arch-specific module values */
-	struct mod_arch_specific arch;
-
-	unsigned int taints;	/* same bits as kernel:tainted */
-
-#ifdef CONFIG_GENERIC_BUG
-	/* Support for BUG */
-	unsigned num_bugs;
-	struct list_head bug_list;
-	struct bug_entry *bug_table;
-#endif
-
-#ifdef CONFIG_KALLSYMS
-	/*
-	 * We keep the symbol and string tables for kallsyms.
-	 * The core_* fields below are temporary, loader-only (they
-	 * could really be discarded after module init).
-	 */
-	Elf_Sym *symtab, *core_symtab;
-	unsigned int num_symtab, core_num_syms;
-	char *strtab, *core_strtab;
-
-	/* Section attributes */
-	struct module_sect_attrs *sect_attrs;
-
-	/* Notes attributes */
-	struct module_notes_attrs *notes_attrs;
-#endif
-
-	/* The command line arguments (may be mangled).  People like
-	   keeping pointers to this stuff */
-	char *args;
-
-#ifdef CONFIG_SMP
-	/* Per-cpu data. */
-	void __percpu *percpu;
-	unsigned int percpu_size;
-#endif
-
-#ifdef CONFIG_TRACEPOINTS
-	unsigned int num_tracepoints;
-	struct tracepoint * const *tracepoints_ptrs;
-#endif
-#ifdef HAVE_JUMP_LABEL
-	struct jump_entry *jump_entries;
-	unsigned int num_jump_entries;
-#endif
-#ifdef CONFIG_TRACING
-	unsigned int num_trace_bprintk_fmt;
-	const char **trace_bprintk_fmt_start;
-#endif
-#ifdef CONFIG_EVENT_TRACING
-	struct ftrace_event_call **trace_events;
-	unsigned int num_trace_events;
-#endif
-#ifdef CONFIG_FTRACE_MCOUNT_RECORD
-	unsigned int num_ftrace_callsites;
-	unsigned long *ftrace_callsites;
-#endif
-
-#ifdef CONFIG_MODULE_UNLOAD
-	/* What modules depend on me? */
-	struct list_head source_list;
-	/* What modules do I depend on? */
-	struct list_head target_list;
-
-	/* Who is waiting for us to be unloaded */
-	struct task_struct *waiter;
-
-	/* Destruction function. */
-	void (*exit)(void);
-
-	struct module_ref __percpu *refptr;
-#endif
-
-#ifdef CONFIG_CONSTRUCTORS
-	/* Constructor functions. */
-	ctor_fn_t *ctors;
-	unsigned int num_ctors;
-#endif
-};
-#ifndef MODULE_ARCH_INIT
-#define MODULE_ARCH_INIT {}
-#endif
-
-extern struct mutex module_mutex;
-
-/* FIXME: It'd be nice to isolate modules during init, too, so they
-   aren't used before they (may) fail.  But presently too much code
-   (IDE & SCSI) require entry into the module during init.*/
-static inline int module_is_live(struct module *mod)
-{
-	return mod->state != MODULE_STATE_GOING;
-}
-
-struct module *__module_text_address(unsigned long addr);
-struct module *__module_address(unsigned long addr);
-bool is_module_address(unsigned long addr);
-bool is_module_percpu_address(unsigned long addr);
-bool is_module_text_address(unsigned long addr);
-
-static inline int within_module_core(unsigned long addr, struct module *mod)
-{
-	return (unsigned long)mod->module_core <= addr &&
-	       addr < (unsigned long)mod->module_core + mod->core_size;
-}
-
-static inline int within_module_init(unsigned long addr, struct module *mod)
-{
-	return (unsigned long)mod->module_init <= addr &&
-	       addr < (unsigned long)mod->module_init + mod->init_size;
-}
-
-/* Search for module by name: must hold module_mutex. */
-struct module *find_module(const char *name);
-
-struct symsearch {
-	const struct kernel_symbol *start, *stop;
-	const unsigned long *crcs;
-	enum {
-		NOT_GPL_ONLY,
-		GPL_ONLY,
-		WILL_BE_GPL_ONLY,
-	} licence;
-	bool unused;
-};
-
-/* Search for an exported symbol by name. */
-const struct kernel_symbol *find_symbol(const char *name,
-					struct module **owner,
-					const unsigned long **crc,
-					bool gplok,
-					bool warn);
-
-/* Walk the exported symbol table */
-bool each_symbol_section(bool (*fn)(const struct symsearch *arr,
-				    struct module *owner,
-				    void *data), void *data);
-
-/* Returns 0 and fills in value, defined and namebuf, or -ERANGE if
-   symnum out of range. */
-int module_get_kallsym(unsigned int symnum, unsigned long *value, char *type,
-			char *name, char *module_name, int *exported);
-
-/* Look for this name: can be of form module:name. */
-unsigned long module_kallsyms_lookup_name(const char *name);
-
-int module_kallsyms_on_each_symbol(int (*fn)(void *, const char *,
-					     struct module *, unsigned long),
-				   void *data);
-
-extern void __module_put_and_exit(struct module *mod, long code)
-	__attribute__((noreturn));
-#define module_put_and_exit(code) __module_put_and_exit(THIS_MODULE, code);
-
-#ifdef CONFIG_MODULE_UNLOAD
-unsigned long module_refcount(struct module *mod);
-void __symbol_put(const char *symbol);
-#define symbol_put(x) __symbol_put(MODULE_SYMBOL_PREFIX #x)
-void symbol_put_addr(void *addr);
-
-/* Sometimes we know we already have a refcount, and it's easier not
-   to handle the error case (which only happens with rmmod --wait). */
-extern void __module_get(struct module *module);
-
-/* This is the Right Way to get a module: if it fails, it's being removed,
- * so pretend it's not there. */
-extern bool try_module_get(struct module *module);
-
-extern void module_put(struct module *module);
-
-#else /*!CONFIG_MODULE_UNLOAD*/
-static inline int try_module_get(struct module *module)
-{
-	return !module || module_is_live(module);
-}
-static inline void module_put(struct module *module)
-{
-}
-static inline void __module_get(struct module *module)
-{
-}
-#define symbol_put(x) do { } while(0)
-#define symbol_put_addr(p) do { } while(0)
-
-#endif /* CONFIG_MODULE_UNLOAD */
-int ref_module(struct module *a, struct module *b);
-
-/* This is a #define so the string doesn't get put in every .o file */
-#define module_name(mod)			\
-({						\
-	struct module *__mod = (mod);		\
-	__mod ? __mod->name : "kernel";		\
-})
-
-/* For kallsyms to ask for address resolution.  namebuf should be at
- * least KSYM_NAME_LEN long: a pointer to namebuf is returned if
- * found, otherwise NULL. */
-const char *module_address_lookup(unsigned long addr,
-			    unsigned long *symbolsize,
-			    unsigned long *offset,
-			    char **modname,
-			    char *namebuf);
-int lookup_module_symbol_name(unsigned long addr, char *symname);
-int lookup_module_symbol_attrs(unsigned long addr, unsigned long *size, unsigned long *offset, char *modname, char *name);
-
-/* For extable.c to search modules' exception tables. */
-const struct exception_table_entry *search_module_extables(unsigned long addr);
-
-int register_module_notifier(struct notifier_block * nb);
-int unregister_module_notifier(struct notifier_block * nb);
-
-extern void print_modules(void);
-
-#else /* !CONFIG_MODULES... */
-
-/* Given an address, look for it in the exception tables. */
-static inline const struct exception_table_entry *
-search_module_extables(unsigned long addr)
-{
-	return NULL;
-}
-
-static inline struct module *__module_address(unsigned long addr)
-{
-	return NULL;
-}
-
-static inline struct module *__module_text_address(unsigned long addr)
-{
-	return NULL;
-}
-
-static inline bool is_module_address(unsigned long addr)
-{
-	return false;
-}
-
-static inline bool is_module_percpu_address(unsigned long addr)
-{
-	return false;
-}
-
-static inline bool is_module_text_address(unsigned long addr)
-{
-	return false;
-}
-
-/* Get/put a kernel symbol (calls should be symmetric) */
-#define symbol_get(x) ({ extern typeof(x) x __attribute__((weak)); &(x); })
-#define symbol_put(x) do { } while(0)
-#define symbol_put_addr(x) do { } while(0)
-
-static inline void __module_get(struct module *module)
-{
-}
-
-static inline int try_module_get(struct module *module)
-{
-	return 1;
-}
-
-static inline void module_put(struct module *module)
-{
-}
-
-#define module_name(mod) "kernel"
-
-/* For kallsyms to ask for address resolution.  NULL means not found. */
-static inline const char *module_address_lookup(unsigned long addr,
-					  unsigned long *symbolsize,
-					  unsigned long *offset,
-					  char **modname,
-					  char *namebuf)
-{
-	return NULL;
-}
-
-static inline int lookup_module_symbol_name(unsigned long addr, char *symname)
-{
-	return -ERANGE;
-}
-
-static inline int lookup_module_symbol_attrs(unsigned long addr, unsigned long *size, unsigned long *offset, char *modname, char *name)
-{
-	return -ERANGE;
-}
-
-static inline int module_get_kallsym(unsigned int symnum, unsigned long *value,
-					char *type, char *name,
-					char *module_name, int *exported)
-{
-	return -ERANGE;
-}
-
-static inline unsigned long module_kallsyms_lookup_name(const char *name)
-{
-	return 0;
-}
-
-static inline int module_kallsyms_on_each_symbol(int (*fn)(void *, const char *,
-							   struct module *,
-							   unsigned long),
-						 void *data)
-{
-	return 0;
-}
-
-static inline int register_module_notifier(struct notifier_block * nb)
-{
-	/* no events will happen anyway, so this can always succeed */
-	return 0;
-}
-
-static inline int unregister_module_notifier(struct notifier_block * nb)
-{
-	return 0;
-}
-
-#define module_put_and_exit(code) do_exit(code)
-
-static inline void print_modules(void)
-{
-}
-#endif /* CONFIG_MODULES */
-
-#ifdef CONFIG_SYSFS
-extern struct kset *module_kset;
-extern struct kobj_type module_ktype;
-extern int module_sysfs_initialized;
-#endif /* CONFIG_SYSFS */
-
-#define symbol_request(x) try_then_request_module(symbol_get(x), "symbol:" #x)
-
-/* BELOW HERE ALL THESE ARE OBSOLETE AND WILL VANISH */
-
-#define __MODULE_STRING(x) __stringify(x)
-
-#ifdef CONFIG_DEBUG_SET_MODULE_RONX
-extern void set_all_modules_text_rw(void);
-extern void set_all_modules_text_ro(void);
-#else
-static inline void set_all_modules_text_rw(void) { }
-static inline void set_all_modules_text_ro(void) { }
-#endif
-
-#ifdef CONFIG_GENERIC_BUG
-void module_bug_finalize(const Elf_Ehdr *, const Elf_Shdr *,
-			 struct module *);
-void module_bug_cleanup(struct module *);
-
-#else	/* !CONFIG_GENERIC_BUG */
-
-static inline void module_bug_finalize(const Elf_Ehdr *hdr,
-					const Elf_Shdr *sechdrs,
-					struct module *mod)
-{
-}
-static inline void module_bug_cleanup(struct module *mod) {}
-#endif	/* CONFIG_GENERIC_BUG */
-
-#endif /* _LINUX_MODULE_H */
diff --git a/ANDROID_3.4.5/include/linux/moduleloader.h b/ANDROID_3.4.5/include/linux/moduleloader.h
deleted file mode 100644
index b2be02eb..00000000
--- a/ANDROID_3.4.5/include/linux/moduleloader.h
+++ /dev/null
@@ -1,55 +0,0 @@
-#ifndef _LINUX_MODULELOADER_H
-#define _LINUX_MODULELOADER_H
-/* The stuff needed for archs to support modules. */
-
-#include <linux/module.h>
-#include <linux/elf.h>
-
-/* These may be implemented by architectures that need to hook into the
- * module loader code.  Architectures that don't need to do anything special
- * can just rely on the 'weak' default hooks defined in kernel/module.c.
- * Note, however, that at least one of apply_relocate or apply_relocate_add
- * must be implemented by each architecture.
- */
-
-/* Adjust arch-specific sections.  Return 0 on success.  */
-int module_frob_arch_sections(Elf_Ehdr *hdr,
-			      Elf_Shdr *sechdrs,
-			      char *secstrings,
-			      struct module *mod);
-
-/* Additional bytes needed by arch in front of individual sections */
-unsigned int arch_mod_section_prepend(struct module *mod, unsigned int section);
-
-/* Allocator used for allocating struct module, core sections and init
-   sections.  Returns NULL on failure. */
-void *module_alloc(unsigned long size);
-
-/* Free memory returned from module_alloc. */
-void module_free(struct module *mod, void *module_region);
-
-/* Apply the given relocation to the (simplified) ELF.  Return -error
-   or 0. */
-int apply_relocate(Elf_Shdr *sechdrs,
-		   const char *strtab,
-		   unsigned int symindex,
-		   unsigned int relsec,
-		   struct module *mod);
-
-/* Apply the given add relocation to the (simplified) ELF.  Return
-   -error or 0 */
-int apply_relocate_add(Elf_Shdr *sechdrs,
-		       const char *strtab,
-		       unsigned int symindex,
-		       unsigned int relsec,
-		       struct module *mod);
-
-/* Any final processing of module before access.  Return -error or 0. */
-int module_finalize(const Elf_Ehdr *hdr,
-		    const Elf_Shdr *sechdrs,
-		    struct module *mod);
-
-/* Any cleanup needed when module leaves. */
-void module_arch_cleanup(struct module *mod);
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/moduleparam.h b/ANDROID_3.4.5/include/linux/moduleparam.h
deleted file mode 100644
index 944bc186..00000000
--- a/ANDROID_3.4.5/include/linux/moduleparam.h
+++ /dev/null
@@ -1,465 +0,0 @@
-#ifndef _LINUX_MODULE_PARAMS_H
-#define _LINUX_MODULE_PARAMS_H
-/* (C) Copyright 2001, 2002 Rusty Russell IBM Corporation */
-#include <linux/init.h>
-#include <linux/stringify.h>
-#include <linux/kernel.h>
-
-/* You can override this manually, but generally this should match the
-   module name. */
-#ifdef MODULE
-#define MODULE_PARAM_PREFIX /* empty */
-#else
-#define MODULE_PARAM_PREFIX KBUILD_MODNAME "."
-#endif
-
-/* Chosen so that structs with an unsigned long line up. */
-#define MAX_PARAM_PREFIX_LEN (64 - sizeof(unsigned long))
-
-#define ___module_cat(a,b) __mod_ ## a ## b
-#define __module_cat(a,b) ___module_cat(a,b)
-#ifdef MODULE
-#define __MODULE_INFO(tag, name, info)					  \
-static const char __module_cat(name,__LINE__)[]				  \
-  __used __attribute__((section(".modinfo"), unused, aligned(1)))	  \
-  = __stringify(tag) "=" info
-#else  /* !MODULE */
-/* This struct is here for syntactic coherency, it is not used */
-#define __MODULE_INFO(tag, name, info)					  \
-  struct __module_cat(name,__LINE__) {}
-#endif
-#define __MODULE_PARM_TYPE(name, _type)					  \
-  __MODULE_INFO(parmtype, name##type, #name ":" _type)
-
-/* One for each parameter, describing how to use it.  Some files do
-   multiple of these per line, so can't just use MODULE_INFO. */
-#define MODULE_PARM_DESC(_parm, desc) \
-	__MODULE_INFO(parm, _parm, #_parm ":" desc)
-
-struct kernel_param;
-
-struct kernel_param_ops {
-	/* Returns 0, or -errno.  arg is in kp->arg. */
-	int (*set)(const char *val, const struct kernel_param *kp);
-	/* Returns length written or -errno.  Buffer is 4k (ie. be short!) */
-	int (*get)(char *buffer, const struct kernel_param *kp);
-	/* Optional function to free kp->arg when module unloaded. */
-	void (*free)(void *arg);
-};
-
-struct kernel_param {
-	const char *name;
-	const struct kernel_param_ops *ops;
-	u16 perm;
-	s16 level;
-	union {
-		void *arg;
-		const struct kparam_string *str;
-		const struct kparam_array *arr;
-	};
-};
-
-/* Special one for strings we want to copy into */
-struct kparam_string {
-	unsigned int maxlen;
-	char *string;
-};
-
-/* Special one for arrays */
-struct kparam_array
-{
-	unsigned int max;
-	unsigned int elemsize;
-	unsigned int *num;
-	const struct kernel_param_ops *ops;
-	void *elem;
-};
-
-/**
- * module_param - typesafe helper for a module/cmdline parameter
- * @value: the variable to alter, and exposed parameter name.
- * @type: the type of the parameter
- * @perm: visibility in sysfs.
- *
- * @value becomes the module parameter, or (prefixed by KBUILD_MODNAME and a
- * ".") the kernel commandline parameter.  Note that - is changed to _, so
- * the user can use "foo-bar=1" even for variable "foo_bar".
- *
- * @perm is 0 if the the variable is not to appear in sysfs, or 0444
- * for world-readable, 0644 for root-writable, etc.  Note that if it
- * is writable, you may need to use kparam_block_sysfs_write() around
- * accesses (esp. charp, which can be kfreed when it changes).
- *
- * The @type is simply pasted to refer to a param_ops_##type and a
- * param_check_##type: for convenience many standard types are provided but
- * you can create your own by defining those variables.
- *
- * Standard types are:
- *	byte, short, ushort, int, uint, long, ulong
- *	charp: a character pointer
- *	bool: a bool, values 0/1, y/n, Y/N.
- *	invbool: the above, only sense-reversed (N = true).
- */
-#define module_param(name, type, perm)				\
-	module_param_named(name, name, type, perm)
-
-/**
- * module_param_named - typesafe helper for a renamed module/cmdline parameter
- * @name: a valid C identifier which is the parameter name.
- * @value: the actual lvalue to alter.
- * @type: the type of the parameter
- * @perm: visibility in sysfs.
- *
- * Usually it's a good idea to have variable names and user-exposed names the
- * same, but that's harder if the variable must be non-static or is inside a
- * structure.  This allows exposure under a different name.
- */
-#define module_param_named(name, value, type, perm)			   \
-	param_check_##type(name, &(value));				   \
-	module_param_cb(name, &param_ops_##type, &value, perm);		   \
-	__MODULE_PARM_TYPE(name, #type)
-
-/**
- * module_param_cb - general callback for a module/cmdline parameter
- * @name: a valid C identifier which is the parameter name.
- * @ops: the set & get operations for this parameter.
- * @perm: visibility in sysfs.
- *
- * The ops can have NULL set or get functions.
- */
-#define module_param_cb(name, ops, arg, perm)				      \
-	__module_param_call(MODULE_PARAM_PREFIX, name, ops, arg, perm, -1)
-
-/**
- * <level>_param_cb - general callback for a module/cmdline parameter
- *                    to be evaluated before certain initcall level
- * @name: a valid C identifier which is the parameter name.
- * @ops: the set & get operations for this parameter.
- * @perm: visibility in sysfs.
- *
- * The ops can have NULL set or get functions.
- */
-#define __level_param_cb(name, ops, arg, perm, level)			\
-	__module_param_call(MODULE_PARAM_PREFIX, name, ops, arg, perm, level)
-
-#define core_param_cb(name, ops, arg, perm)		\
-	__level_param_cb(name, ops, arg, perm, 1)
-
-#define postcore_param_cb(name, ops, arg, perm)		\
-	__level_param_cb(name, ops, arg, perm, 2)
-
-#define arch_param_cb(name, ops, arg, perm)		\
-	__level_param_cb(name, ops, arg, perm, 3)
-
-#define subsys_param_cb(name, ops, arg, perm)		\
-	__level_param_cb(name, ops, arg, perm, 4)
-
-#define fs_param_cb(name, ops, arg, perm)		\
-	__level_param_cb(name, ops, arg, perm, 5)
-
-#define device_param_cb(name, ops, arg, perm)		\
-	__level_param_cb(name, ops, arg, perm, 6)
-
-#define late_param_cb(name, ops, arg, perm)		\
-	__level_param_cb(name, ops, arg, perm, 7)
-
-/* On alpha, ia64 and ppc64 relocations to global data cannot go into
-   read-only sections (which is part of respective UNIX ABI on these
-   platforms). So 'const' makes no sense and even causes compile failures
-   with some compilers. */
-#if defined(CONFIG_ALPHA) || defined(CONFIG_IA64) || defined(CONFIG_PPC64)
-#define __moduleparam_const
-#else
-#define __moduleparam_const const
-#endif
-
-/* This is the fundamental function for registering boot/module
-   parameters. */
-#define __module_param_call(prefix, name, ops, arg, perm, level)	\
-	/* Default value instead of permissions? */			\
-	static int __param_perm_check_##name __attribute__((unused)) =	\
-	BUILD_BUG_ON_ZERO((perm) < 0 || (perm) > 0777 || ((perm) & 2))	\
-	+ BUILD_BUG_ON_ZERO(sizeof(""prefix) > MAX_PARAM_PREFIX_LEN);	\
-	static const char __param_str_##name[] = prefix #name;		\
-	static struct kernel_param __moduleparam_const __param_##name	\
-	__used								\
-    __attribute__ ((unused,__section__ ("__param"),aligned(sizeof(void *)))) \
-	= { __param_str_##name, ops, perm, level, { arg } }
-
-/* Obsolete - use module_param_cb() */
-#define module_param_call(name, set, get, arg, perm)			\
-	static struct kernel_param_ops __param_ops_##name =		\
-		 { (void *)set, (void *)get };				\
-	__module_param_call(MODULE_PARAM_PREFIX,			\
-			    name, &__param_ops_##name, arg,		\
-			    (perm) + sizeof(__check_old_set_param(set))*0, -1)
-
-/* We don't get oldget: it's often a new-style param_get_uint, etc. */
-static inline int
-__check_old_set_param(int (*oldset)(const char *, struct kernel_param *))
-{
-	return 0;
-}
-
-/**
- * kparam_block_sysfs_write - make sure a parameter isn't written via sysfs.
- * @name: the name of the parameter
- *
- * There's no point blocking write on a paramter that isn't writable via sysfs!
- */
-#define kparam_block_sysfs_write(name)			\
-	do {						\
-		BUG_ON(!(__param_##name.perm & 0222));	\
-		__kernel_param_lock();			\
-	} while (0)
-
-/**
- * kparam_unblock_sysfs_write - allows sysfs to write to a parameter again.
- * @name: the name of the parameter
- */
-#define kparam_unblock_sysfs_write(name)		\
-	do {						\
-		BUG_ON(!(__param_##name.perm & 0222));	\
-		__kernel_param_unlock();		\
-	} while (0)
-
-/**
- * kparam_block_sysfs_read - make sure a parameter isn't read via sysfs.
- * @name: the name of the parameter
- *
- * This also blocks sysfs writes.
- */
-#define kparam_block_sysfs_read(name)			\
-	do {						\
-		BUG_ON(!(__param_##name.perm & 0444));	\
-		__kernel_param_lock();			\
-	} while (0)
-
-/**
- * kparam_unblock_sysfs_read - allows sysfs to read a parameter again.
- * @name: the name of the parameter
- */
-#define kparam_unblock_sysfs_read(name)			\
-	do {						\
-		BUG_ON(!(__param_##name.perm & 0444));	\
-		__kernel_param_unlock();		\
-	} while (0)
-
-#ifdef CONFIG_SYSFS
-extern void __kernel_param_lock(void);
-extern void __kernel_param_unlock(void);
-#else
-static inline void __kernel_param_lock(void)
-{
-}
-static inline void __kernel_param_unlock(void)
-{
-}
-#endif
-
-#ifndef MODULE
-/**
- * core_param - define a historical core kernel parameter.
- * @name: the name of the cmdline and sysfs parameter (often the same as var)
- * @var: the variable
- * @type: the type of the parameter
- * @perm: visibility in sysfs
- *
- * core_param is just like module_param(), but cannot be modular and
- * doesn't add a prefix (such as "printk.").  This is for compatibility
- * with __setup(), and it makes sense as truly core parameters aren't
- * tied to the particular file they're in.
- */
-#define core_param(name, var, type, perm)				\
-	param_check_##type(name, &(var));				\
-	__module_param_call("", name, &param_ops_##type, &var, perm, -1)
-#endif /* !MODULE */
-
-/**
- * module_param_string - a char array parameter
- * @name: the name of the parameter
- * @string: the string variable
- * @len: the maximum length of the string, incl. terminator
- * @perm: visibility in sysfs.
- *
- * This actually copies the string when it's set (unlike type charp).
- * @len is usually just sizeof(string).
- */
-#define module_param_string(name, string, len, perm)			\
-	static const struct kparam_string __param_string_##name		\
-		= { len, string };					\
-	__module_param_call(MODULE_PARAM_PREFIX, name,			\
-			    &param_ops_string,				\
-			    .str = &__param_string_##name, perm, -1);	\
-	__MODULE_PARM_TYPE(name, "string")
-
-/**
- * parameq - checks if two parameter names match
- * @name1: parameter name 1
- * @name2: parameter name 2
- *
- * Returns true if the two parameter names are equal.
- * Dashes (-) are considered equal to underscores (_).
- */
-extern bool parameq(const char *name1, const char *name2);
-
-/**
- * parameqn - checks if two parameter names match
- * @name1: parameter name 1
- * @name2: parameter name 2
- * @n: the length to compare
- *
- * Similar to parameq(), except it compares @n characters.
- */
-extern bool parameqn(const char *name1, const char *name2, size_t n);
-
-/* Called on module insert or kernel boot */
-extern int parse_args(const char *name,
-		      char *args,
-		      const struct kernel_param *params,
-		      unsigned num,
-		      s16 level_min,
-		      s16 level_max,
-		      int (*unknown)(char *param, char *val));
-
-/* Called by module remove. */
-#ifdef CONFIG_SYSFS
-extern void destroy_params(const struct kernel_param *params, unsigned num);
-#else
-static inline void destroy_params(const struct kernel_param *params,
-				  unsigned num)
-{
-}
-#endif /* !CONFIG_SYSFS */
-
-/* All the helper functions */
-/* The macros to do compile-time type checking stolen from Jakub
-   Jelinek, who IIRC came up with this idea for the 2.4 module init code. */
-#define __param_check(name, p, type) \
-	static inline type *__check_##name(void) { return(p); }
-
-extern struct kernel_param_ops param_ops_byte;
-extern int param_set_byte(const char *val, const struct kernel_param *kp);
-extern int param_get_byte(char *buffer, const struct kernel_param *kp);
-#define param_check_byte(name, p) __param_check(name, p, unsigned char)
-
-extern struct kernel_param_ops param_ops_short;
-extern int param_set_short(const char *val, const struct kernel_param *kp);
-extern int param_get_short(char *buffer, const struct kernel_param *kp);
-#define param_check_short(name, p) __param_check(name, p, short)
-
-extern struct kernel_param_ops param_ops_ushort;
-extern int param_set_ushort(const char *val, const struct kernel_param *kp);
-extern int param_get_ushort(char *buffer, const struct kernel_param *kp);
-#define param_check_ushort(name, p) __param_check(name, p, unsigned short)
-
-extern struct kernel_param_ops param_ops_int;
-extern int param_set_int(const char *val, const struct kernel_param *kp);
-extern int param_get_int(char *buffer, const struct kernel_param *kp);
-#define param_check_int(name, p) __param_check(name, p, int)
-
-extern struct kernel_param_ops param_ops_uint;
-extern int param_set_uint(const char *val, const struct kernel_param *kp);
-extern int param_get_uint(char *buffer, const struct kernel_param *kp);
-#define param_check_uint(name, p) __param_check(name, p, unsigned int)
-
-extern struct kernel_param_ops param_ops_long;
-extern int param_set_long(const char *val, const struct kernel_param *kp);
-extern int param_get_long(char *buffer, const struct kernel_param *kp);
-#define param_check_long(name, p) __param_check(name, p, long)
-
-extern struct kernel_param_ops param_ops_ulong;
-extern int param_set_ulong(const char *val, const struct kernel_param *kp);
-extern int param_get_ulong(char *buffer, const struct kernel_param *kp);
-#define param_check_ulong(name, p) __param_check(name, p, unsigned long)
-
-extern struct kernel_param_ops param_ops_charp;
-extern int param_set_charp(const char *val, const struct kernel_param *kp);
-extern int param_get_charp(char *buffer, const struct kernel_param *kp);
-#define param_check_charp(name, p) __param_check(name, p, char *)
-
-/* We used to allow int as well as bool.  We're taking that away! */
-extern struct kernel_param_ops param_ops_bool;
-extern int param_set_bool(const char *val, const struct kernel_param *kp);
-extern int param_get_bool(char *buffer, const struct kernel_param *kp);
-#define param_check_bool(name, p) __param_check(name, p, bool)
-
-extern struct kernel_param_ops param_ops_invbool;
-extern int param_set_invbool(const char *val, const struct kernel_param *kp);
-extern int param_get_invbool(char *buffer, const struct kernel_param *kp);
-#define param_check_invbool(name, p) __param_check(name, p, bool)
-
-/* An int, which can only be set like a bool (though it shows as an int). */
-extern struct kernel_param_ops param_ops_bint;
-extern int param_set_bint(const char *val, const struct kernel_param *kp);
-#define param_get_bint param_get_int
-#define param_check_bint param_check_int
-
-/**
- * module_param_array - a parameter which is an array of some type
- * @name: the name of the array variable
- * @type: the type, as per module_param()
- * @nump: optional pointer filled in with the number written
- * @perm: visibility in sysfs
- *
- * Input and output are as comma-separated values.  Commas inside values
- * don't work properly (eg. an array of charp).
- *
- * ARRAY_SIZE(@name) is used to determine the number of elements in the
- * array, so the definition must be visible.
- */
-#define module_param_array(name, type, nump, perm)		\
-	module_param_array_named(name, name, type, nump, perm)
-
-/**
- * module_param_array_named - renamed parameter which is an array of some type
- * @name: a valid C identifier which is the parameter name
- * @array: the name of the array variable
- * @type: the type, as per module_param()
- * @nump: optional pointer filled in with the number written
- * @perm: visibility in sysfs
- *
- * This exposes a different name than the actual variable name.  See
- * module_param_named() for why this might be necessary.
- */
-#define module_param_array_named(name, array, type, nump, perm)		\
-	param_check_##type(name, &(array)[0]);				\
-	static const struct kparam_array __param_arr_##name		\
-	= { .max = ARRAY_SIZE(array), .num = nump,                      \
-	    .ops = &param_ops_##type,					\
-	    .elemsize = sizeof(array[0]), .elem = array };		\
-	__module_param_call(MODULE_PARAM_PREFIX, name,			\
-			    &param_array_ops,				\
-			    .arr = &__param_arr_##name,			\
-			    perm, -1);					\
-	__MODULE_PARM_TYPE(name, "array of " #type)
-
-extern struct kernel_param_ops param_array_ops;
-
-extern struct kernel_param_ops param_ops_string;
-extern int param_set_copystring(const char *val, const struct kernel_param *);
-extern int param_get_string(char *buffer, const struct kernel_param *kp);
-
-/* for exporting parameters in /sys/parameters */
-
-struct module;
-
-#if defined(CONFIG_SYSFS) && defined(CONFIG_MODULES)
-extern int module_param_sysfs_setup(struct module *mod,
-				    const struct kernel_param *kparam,
-				    unsigned int num_params);
-
-extern void module_param_sysfs_remove(struct module *mod);
-#else
-static inline int module_param_sysfs_setup(struct module *mod,
-			     const struct kernel_param *kparam,
-			     unsigned int num_params)
-{
-	return 0;
-}
-
-static inline void module_param_sysfs_remove(struct module *mod)
-{ }
-#endif
-
-#endif /* _LINUX_MODULE_PARAMS_H */
diff --git a/ANDROID_3.4.5/include/linux/mount.h b/ANDROID_3.4.5/include/linux/mount.h
deleted file mode 100644
index d7029f4a..00000000
--- a/ANDROID_3.4.5/include/linux/mount.h
+++ /dev/null
@@ -1,79 +0,0 @@
-/*
- *
- * Definitions for mount interface. This describes the in the kernel build 
- * linkedlist with mounted filesystems.
- *
- * Author:  Marco van Wieringen <mvw@planets.elm.net>
- *
- */
-#ifndef _LINUX_MOUNT_H
-#define _LINUX_MOUNT_H
-
-#include <linux/types.h>
-#include <linux/list.h>
-#include <linux/nodemask.h>
-#include <linux/spinlock.h>
-#include <linux/seqlock.h>
-#include <linux/atomic.h>
-
-struct super_block;
-struct vfsmount;
-struct dentry;
-struct mnt_namespace;
-
-#define MNT_NOSUID	0x01
-#define MNT_NODEV	0x02
-#define MNT_NOEXEC	0x04
-#define MNT_NOATIME	0x08
-#define MNT_NODIRATIME	0x10
-#define MNT_RELATIME	0x20
-#define MNT_READONLY	0x40	/* does the user want this to be r/o? */
-
-#define MNT_SHRINKABLE	0x100
-#define MNT_WRITE_HOLD	0x200
-
-#define MNT_SHARED	0x1000	/* if the vfsmount is a shared mount */
-#define MNT_UNBINDABLE	0x2000	/* if the vfsmount is a unbindable mount */
-/*
- * MNT_SHARED_MASK is the set of flags that should be cleared when a
- * mount becomes shared.  Currently, this is only the flag that says a
- * mount cannot be bind mounted, since this is how we create a mount
- * that shares events with another mount.  If you add a new MNT_*
- * flag, consider how it interacts with shared mounts.
- */
-#define MNT_SHARED_MASK	(MNT_UNBINDABLE)
-#define MNT_PROPAGATION_MASK	(MNT_SHARED | MNT_UNBINDABLE)
-
-
-#define MNT_INTERNAL	0x4000
-
-struct vfsmount {
-	struct dentry *mnt_root;	/* root of the mounted tree */
-	struct super_block *mnt_sb;	/* pointer to superblock */
-	int mnt_flags;
-};
-
-struct file; /* forward dec */
-
-extern int mnt_want_write(struct vfsmount *mnt);
-extern int mnt_want_write_file(struct file *file);
-extern int mnt_clone_write(struct vfsmount *mnt);
-extern void mnt_drop_write(struct vfsmount *mnt);
-extern void mnt_drop_write_file(struct file *file);
-extern void mntput(struct vfsmount *mnt);
-extern struct vfsmount *mntget(struct vfsmount *mnt);
-extern void mnt_pin(struct vfsmount *mnt);
-extern void mnt_unpin(struct vfsmount *mnt);
-extern int __mnt_is_readonly(struct vfsmount *mnt);
-
-struct file_system_type;
-extern struct vfsmount *vfs_kern_mount(struct file_system_type *type,
-				      int flags, const char *name,
-				      void *data);
-
-extern void mnt_set_expiry(struct vfsmount *mnt, struct list_head *expiry_list);
-extern void mark_mounts_for_expiry(struct list_head *mounts);
-
-extern dev_t name_to_dev_t(char *name);
-
-#endif /* _LINUX_MOUNT_H */
diff --git a/ANDROID_3.4.5/include/linux/mpage.h b/ANDROID_3.4.5/include/linux/mpage.h
deleted file mode 100644
index 068a0c99..00000000
--- a/ANDROID_3.4.5/include/linux/mpage.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * include/linux/mpage.h
- *
- * Contains declarations related to preparing and submitting BIOS which contain
- * multiple pagecache pages.
- */
-
-/*
- * (And no, it doesn't do the #ifdef __MPAGE_H thing, and it doesn't do
- * nested includes.  Get it right in the .c file).
- */
-#ifdef CONFIG_BLOCK
-
-struct writeback_control;
-
-int mpage_readpages(struct address_space *mapping, struct list_head *pages,
-				unsigned nr_pages, get_block_t get_block);
-int mpage_readpage(struct page *page, get_block_t get_block);
-int mpage_writepages(struct address_space *mapping,
-		struct writeback_control *wbc, get_block_t get_block);
-int mpage_writepage(struct page *page, get_block_t *get_block,
-		struct writeback_control *wbc);
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/mpi.h b/ANDROID_3.4.5/include/linux/mpi.h
deleted file mode 100644
index d02cca6c..00000000
--- a/ANDROID_3.4.5/include/linux/mpi.h
+++ /dev/null
@@ -1,144 +0,0 @@
-/* mpi.h  -  Multi Precision Integers
- *	Copyright (C) 1994, 1996, 1998, 1999,
- *                    2000, 2001 Free Software Foundation, Inc.
- *
- * This file is part of GNUPG.
- *
- * GNUPG is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * GNUPG is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
- *
- * Note: This code is heavily based on the GNU MP Library.
- *	 Actually it's the same code with only minor changes in the
- *	 way the data is stored; this is to support the abstraction
- *	 of an optional secure memory allocation which may be used
- *	 to avoid revealing of sensitive data due to paging etc.
- *	 The GNU MP Library itself is published under the LGPL;
- *	 however I decided to publish this code under the plain GPL.
- */
-
-#ifndef G10_MPI_H
-#define G10_MPI_H
-
-#include <linux/types.h>
-
-/* DSI defines */
-
-#define SHA1_DIGEST_LENGTH   20
-
-/*end of DSI defines */
-
-#define BYTES_PER_MPI_LIMB	(BITS_PER_LONG / 8)
-#define BITS_PER_MPI_LIMB	BITS_PER_LONG
-
-typedef unsigned long int mpi_limb_t;
-typedef signed long int mpi_limb_signed_t;
-
-struct gcry_mpi {
-	int alloced;		/* array size (# of allocated limbs) */
-	int nlimbs;		/* number of valid limbs */
-	int nbits;		/* the real number of valid bits (info only) */
-	int sign;		/* indicates a negative number */
-	unsigned flags;		/* bit 0: array must be allocated in secure memory space */
-	/* bit 1: not used */
-	/* bit 2: the limb is a pointer to some m_alloced data */
-	mpi_limb_t *d;		/* array with the limbs */
-};
-
-typedef struct gcry_mpi *MPI;
-
-#define mpi_get_nlimbs(a)     ((a)->nlimbs)
-#define mpi_is_neg(a)	      ((a)->sign)
-
-/*-- mpiutil.c --*/
-MPI mpi_alloc(unsigned nlimbs);
-MPI mpi_alloc_secure(unsigned nlimbs);
-MPI mpi_alloc_like(MPI a);
-void mpi_free(MPI a);
-int mpi_resize(MPI a, unsigned nlimbs);
-int mpi_copy(MPI *copy, const MPI a);
-void mpi_clear(MPI a);
-int mpi_set(MPI w, MPI u);
-int mpi_set_ui(MPI w, ulong u);
-MPI mpi_alloc_set_ui(unsigned long u);
-void mpi_m_check(MPI a);
-void mpi_swap(MPI a, MPI b);
-
-/*-- mpicoder.c --*/
-MPI do_encode_md(const void *sha_buffer, unsigned nbits);
-MPI mpi_read_from_buffer(const void *buffer, unsigned *ret_nread);
-int mpi_fromstr(MPI val, const char *str);
-u32 mpi_get_keyid(MPI a, u32 *keyid);
-void *mpi_get_buffer(MPI a, unsigned *nbytes, int *sign);
-void *mpi_get_secure_buffer(MPI a, unsigned *nbytes, int *sign);
-int mpi_set_buffer(MPI a, const void *buffer, unsigned nbytes, int sign);
-
-#define log_mpidump g10_log_mpidump
-
-/*-- mpi-add.c --*/
-int mpi_add_ui(MPI w, MPI u, ulong v);
-int mpi_add(MPI w, MPI u, MPI v);
-int mpi_addm(MPI w, MPI u, MPI v, MPI m);
-int mpi_sub_ui(MPI w, MPI u, ulong v);
-int mpi_sub(MPI w, MPI u, MPI v);
-int mpi_subm(MPI w, MPI u, MPI v, MPI m);
-
-/*-- mpi-mul.c --*/
-int mpi_mul_ui(MPI w, MPI u, ulong v);
-int mpi_mul_2exp(MPI w, MPI u, ulong cnt);
-int mpi_mul(MPI w, MPI u, MPI v);
-int mpi_mulm(MPI w, MPI u, MPI v, MPI m);
-
-/*-- mpi-div.c --*/
-ulong mpi_fdiv_r_ui(MPI rem, MPI dividend, ulong divisor);
-int mpi_fdiv_r(MPI rem, MPI dividend, MPI divisor);
-int mpi_fdiv_q(MPI quot, MPI dividend, MPI divisor);
-int mpi_fdiv_qr(MPI quot, MPI rem, MPI dividend, MPI divisor);
-int mpi_tdiv_r(MPI rem, MPI num, MPI den);
-int mpi_tdiv_qr(MPI quot, MPI rem, MPI num, MPI den);
-int mpi_tdiv_q_2exp(MPI w, MPI u, unsigned count);
-int mpi_divisible_ui(const MPI dividend, ulong divisor);
-
-/*-- mpi-gcd.c --*/
-int mpi_gcd(MPI g, const MPI a, const MPI b);
-
-/*-- mpi-pow.c --*/
-int mpi_pow(MPI w, MPI u, MPI v);
-int mpi_powm(MPI res, MPI base, MPI exp, MPI mod);
-
-/*-- mpi-mpow.c --*/
-int mpi_mulpowm(MPI res, MPI *basearray, MPI *exparray, MPI mod);
-
-/*-- mpi-cmp.c --*/
-int mpi_cmp_ui(MPI u, ulong v);
-int mpi_cmp(MPI u, MPI v);
-
-/*-- mpi-scan.c --*/
-int mpi_getbyte(MPI a, unsigned idx);
-void mpi_putbyte(MPI a, unsigned idx, int value);
-unsigned mpi_trailing_zeros(MPI a);
-
-/*-- mpi-bit.c --*/
-void mpi_normalize(MPI a);
-unsigned mpi_get_nbits(MPI a);
-int mpi_test_bit(MPI a, unsigned n);
-int mpi_set_bit(MPI a, unsigned n);
-int mpi_set_highbit(MPI a, unsigned n);
-void mpi_clear_highbit(MPI a, unsigned n);
-void mpi_clear_bit(MPI a, unsigned n);
-int mpi_rshift(MPI x, MPI a, unsigned n);
-
-/*-- mpi-inv.c --*/
-int mpi_invm(MPI x, MPI u, MPI v);
-
-#endif /*G10_MPI_H */
diff --git a/ANDROID_3.4.5/include/linux/mqueue.h b/ANDROID_3.4.5/include/linux/mqueue.h
deleted file mode 100644
index 8b5a7961..00000000
--- a/ANDROID_3.4.5/include/linux/mqueue.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/* Copyright (C) 2003 Krzysztof Benedyczak & Michal Wronski
-
-   This program is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   It is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with this software; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#ifndef _LINUX_MQUEUE_H
-#define _LINUX_MQUEUE_H
-
-#define MQ_PRIO_MAX 	32768
-/* per-uid limit of kernel memory used by mqueue, in bytes */
-#define MQ_BYTES_MAX	819200
-
-struct mq_attr {
-	long	mq_flags;	/* message queue flags			*/
-	long	mq_maxmsg;	/* maximum number of messages		*/
-	long	mq_msgsize;	/* maximum message size			*/
-	long	mq_curmsgs;	/* number of messages currently queued	*/
-	long	__reserved[4];	/* ignored for input, zeroed for output */
-};
-
-/*
- * SIGEV_THREAD implementation:
- * SIGEV_THREAD must be implemented in user space. If SIGEV_THREAD is passed
- * to mq_notify, then
- * - sigev_signo must be the file descriptor of an AF_NETLINK socket. It's not
- *   necessary that the socket is bound.
- * - sigev_value.sival_ptr must point to a cookie that is NOTIFY_COOKIE_LEN
- *   bytes long.
- * If the notification is triggered, then the cookie is sent to the netlink
- * socket. The last byte of the cookie is replaced with the NOTIFY_?? codes:
- * NOTIFY_WOKENUP if the notification got triggered, NOTIFY_REMOVED if it was
- * removed, either due to a close() on the message queue fd or due to a
- * mq_notify() that removed the notification.
- */
-#define NOTIFY_NONE	0
-#define NOTIFY_WOKENUP	1
-#define NOTIFY_REMOVED	2
-
-#define NOTIFY_COOKIE_LEN	32
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/mroute.h b/ANDROID_3.4.5/include/linux/mroute.h
deleted file mode 100644
index 46caaf44..00000000
--- a/ANDROID_3.4.5/include/linux/mroute.h
+++ /dev/null
@@ -1,251 +0,0 @@
-#ifndef __LINUX_MROUTE_H
-#define __LINUX_MROUTE_H
-
-#include <linux/sockios.h>
-#include <linux/types.h>
-#ifdef __KERNEL__
-#include <linux/in.h>
-#endif
-
-/*
- *	Based on the MROUTING 3.5 defines primarily to keep
- *	source compatibility with BSD.
- *
- *	See the mrouted code for the original history.
- *
- *      Protocol Independent Multicast (PIM) data structures included
- *      Carlos Picoto (cap@di.fc.ul.pt)
- *
- */
-
-#define MRT_BASE	200
-#define MRT_INIT	(MRT_BASE)	/* Activate the kernel mroute code 	*/
-#define MRT_DONE	(MRT_BASE+1)	/* Shutdown the kernel mroute		*/
-#define MRT_ADD_VIF	(MRT_BASE+2)	/* Add a virtual interface		*/
-#define MRT_DEL_VIF	(MRT_BASE+3)	/* Delete a virtual interface		*/
-#define MRT_ADD_MFC	(MRT_BASE+4)	/* Add a multicast forwarding entry	*/
-#define MRT_DEL_MFC	(MRT_BASE+5)	/* Delete a multicast forwarding entry	*/
-#define MRT_VERSION	(MRT_BASE+6)	/* Get the kernel multicast version	*/
-#define MRT_ASSERT	(MRT_BASE+7)	/* Activate PIM assert mode		*/
-#define MRT_PIM		(MRT_BASE+8)	/* enable PIM code			*/
-#define MRT_TABLE	(MRT_BASE+9)	/* Specify mroute table ID		*/
-
-#define SIOCGETVIFCNT	SIOCPROTOPRIVATE	/* IP protocol privates */
-#define SIOCGETSGCNT	(SIOCPROTOPRIVATE+1)
-#define SIOCGETRPF	(SIOCPROTOPRIVATE+2)
-
-#define MAXVIFS		32	
-typedef unsigned long vifbitmap_t;	/* User mode code depends on this lot */
-typedef unsigned short vifi_t;
-#define ALL_VIFS	((vifi_t)(-1))
-
-/*
- *	Same idea as select
- */
- 
-#define VIFM_SET(n,m)	((m)|=(1<<(n)))
-#define VIFM_CLR(n,m)	((m)&=~(1<<(n)))
-#define VIFM_ISSET(n,m)	((m)&(1<<(n)))
-#define VIFM_CLRALL(m)	((m)=0)
-#define VIFM_COPY(mfrom,mto)	((mto)=(mfrom))
-#define VIFM_SAME(m1,m2)	((m1)==(m2))
-
-/*
- *	Passed by mrouted for an MRT_ADD_VIF - again we use the
- *	mrouted 3.6 structures for compatibility
- */
- 
-struct vifctl {
-	vifi_t	vifc_vifi;		/* Index of VIF */
-	unsigned char vifc_flags;	/* VIFF_ flags */
-	unsigned char vifc_threshold;	/* ttl limit */
-	unsigned int vifc_rate_limit;	/* Rate limiter values (NI) */
-	union {
-		struct in_addr vifc_lcl_addr;     /* Local interface address */
-		int            vifc_lcl_ifindex;  /* Local interface index   */
-	};
-	struct in_addr vifc_rmt_addr;	/* IPIP tunnel addr */
-};
-
-#define VIFF_TUNNEL		0x1	/* IPIP tunnel */
-#define VIFF_SRCRT		0x2	/* NI */
-#define VIFF_REGISTER		0x4	/* register vif	*/
-#define VIFF_USE_IFINDEX	0x8	/* use vifc_lcl_ifindex instead of
-					   vifc_lcl_addr to find an interface */
-
-/*
- *	Cache manipulation structures for mrouted and PIMd
- */
- 
-struct mfcctl {
-	struct in_addr mfcc_origin;		/* Origin of mcast	*/
-	struct in_addr mfcc_mcastgrp;		/* Group in question	*/
-	vifi_t	mfcc_parent;			/* Where it arrived	*/
-	unsigned char mfcc_ttls[MAXVIFS];	/* Where it is going	*/
-	unsigned int mfcc_pkt_cnt;		/* pkt count for src-grp */
-	unsigned int mfcc_byte_cnt;
-	unsigned int mfcc_wrong_if;
-	int	     mfcc_expire;
-};
-
-/* 
- *	Group count retrieval for mrouted
- */
- 
-struct sioc_sg_req {
-	struct in_addr src;
-	struct in_addr grp;
-	unsigned long pktcnt;
-	unsigned long bytecnt;
-	unsigned long wrong_if;
-};
-
-/*
- *	To get vif packet counts
- */
-
-struct sioc_vif_req {
-	vifi_t	vifi;		/* Which iface */
-	unsigned long icount;	/* In packets */
-	unsigned long ocount;	/* Out packets */
-	unsigned long ibytes;	/* In bytes */
-	unsigned long obytes;	/* Out bytes */
-};
-
-/*
- *	This is the format the mroute daemon expects to see IGMP control
- *	data. Magically happens to be like an IP packet as per the original
- */
- 
-struct igmpmsg {
-	__u32 unused1,unused2;
-	unsigned char im_msgtype;		/* What is this */
-	unsigned char im_mbz;			/* Must be zero */
-	unsigned char im_vif;			/* Interface (this ought to be a vifi_t!) */
-	unsigned char unused3;
-	struct in_addr im_src,im_dst;
-};
-
-/*
- *	That's all usermode folks
- */
-
-#ifdef __KERNEL__
-#include <linux/pim.h>
-#include <net/sock.h>
-
-#ifdef CONFIG_IP_MROUTE
-static inline int ip_mroute_opt(int opt)
-{
-	return (opt >= MRT_BASE) && (opt <= MRT_BASE + 10);
-}
-#else
-static inline int ip_mroute_opt(int opt)
-{
-	return 0;
-}
-#endif
-
-#ifdef CONFIG_IP_MROUTE
-extern int ip_mroute_setsockopt(struct sock *, int, char __user *, unsigned int);
-extern int ip_mroute_getsockopt(struct sock *, int, char __user *, int __user *);
-extern int ipmr_ioctl(struct sock *sk, int cmd, void __user *arg);
-extern int ipmr_compat_ioctl(struct sock *sk, unsigned int cmd, void __user *arg);
-extern int ip_mr_init(void);
-#else
-static inline
-int ip_mroute_setsockopt(struct sock *sock,
-			 int optname, char __user *optval, unsigned int optlen)
-{
-	return -ENOPROTOOPT;
-}
-
-static inline
-int ip_mroute_getsockopt(struct sock *sock,
-			 int optname, char __user *optval, int __user *optlen)
-{
-	return -ENOPROTOOPT;
-}
-
-static inline
-int ipmr_ioctl(struct sock *sk, int cmd, void __user *arg)
-{
-	return -ENOIOCTLCMD;
-}
-
-static inline int ip_mr_init(void)
-{
-	return 0;
-}
-#endif
-
-struct vif_device {
-	struct net_device 	*dev;			/* Device we are using */
-	unsigned long	bytes_in,bytes_out;
-	unsigned long	pkt_in,pkt_out;		/* Statistics 			*/
-	unsigned long	rate_limit;		/* Traffic shaping (NI) 	*/
-	unsigned char	threshold;		/* TTL threshold 		*/
-	unsigned short	flags;			/* Control flags 		*/
-	__be32		local,remote;		/* Addresses(remote for tunnels)*/
-	int		link;			/* Physical interface index	*/
-};
-
-#define VIFF_STATIC 0x8000
-
-struct mfc_cache {
-	struct list_head list;
-	__be32 mfc_mcastgrp;			/* Group the entry belongs to 	*/
-	__be32 mfc_origin;			/* Source of packet 		*/
-	vifi_t mfc_parent;			/* Source interface		*/
-	int mfc_flags;				/* Flags on line		*/
-
-	union {
-		struct {
-			unsigned long expires;
-			struct sk_buff_head unresolved;	/* Unresolved buffers		*/
-		} unres;
-		struct {
-			unsigned long last_assert;
-			int minvif;
-			int maxvif;
-			unsigned long bytes;
-			unsigned long pkt;
-			unsigned long wrong_if;
-			unsigned char ttls[MAXVIFS];	/* TTL thresholds		*/
-		} res;
-	} mfc_un;
-	struct rcu_head	rcu;
-};
-
-#define MFC_STATIC		1
-#define MFC_NOTIFY		2
-
-#define MFC_LINES		64
-
-#ifdef __BIG_ENDIAN
-#define MFC_HASH(a,b)	(((((__force u32)(__be32)a)>>24)^(((__force u32)(__be32)b)>>26))&(MFC_LINES-1))
-#else
-#define MFC_HASH(a,b)	((((__force u32)(__be32)a)^(((__force u32)(__be32)b)>>2))&(MFC_LINES-1))
-#endif		
-
-#endif
-
-
-#define MFC_ASSERT_THRESH (3*HZ)		/* Maximal freq. of asserts */
-
-/*
- *	Pseudo messages used by mrouted
- */
-
-#define IGMPMSG_NOCACHE		1		/* Kern cache fill request to mrouted */
-#define IGMPMSG_WRONGVIF	2		/* For PIM assert processing (unused) */
-#define IGMPMSG_WHOLEPKT	3		/* For PIM Register processing */
-
-#ifdef __KERNEL__
-struct rtmsg;
-extern int ipmr_get_route(struct net *net, struct sk_buff *skb,
-			  __be32 saddr, __be32 daddr,
-			  struct rtmsg *rtm, int nowait);
-#endif
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/mroute6.h b/ANDROID_3.4.5/include/linux/mroute6.h
deleted file mode 100644
index 6d8c7251..00000000
--- a/ANDROID_3.4.5/include/linux/mroute6.h
+++ /dev/null
@@ -1,269 +0,0 @@
-#ifndef __LINUX_MROUTE6_H
-#define __LINUX_MROUTE6_H
-
-#include <linux/types.h>
-#include <linux/sockios.h>
-
-/*
- *	Based on the MROUTING 3.5 defines primarily to keep
- *	source compatibility with BSD.
- *
- *	See the pim6sd code for the original history.
- *
- *      Protocol Independent Multicast (PIM) data structures included
- *      Carlos Picoto (cap@di.fc.ul.pt)
- *
- */
-
-#define MRT6_BASE	200
-#define MRT6_INIT	(MRT6_BASE)	/* Activate the kernel mroute code 	*/
-#define MRT6_DONE	(MRT6_BASE+1)	/* Shutdown the kernel mroute		*/
-#define MRT6_ADD_MIF	(MRT6_BASE+2)	/* Add a virtual interface		*/
-#define MRT6_DEL_MIF	(MRT6_BASE+3)	/* Delete a virtual interface		*/
-#define MRT6_ADD_MFC	(MRT6_BASE+4)	/* Add a multicast forwarding entry	*/
-#define MRT6_DEL_MFC	(MRT6_BASE+5)	/* Delete a multicast forwarding entry	*/
-#define MRT6_VERSION	(MRT6_BASE+6)	/* Get the kernel multicast version	*/
-#define MRT6_ASSERT	(MRT6_BASE+7)	/* Activate PIM assert mode		*/
-#define MRT6_PIM	(MRT6_BASE+8)	/* enable PIM code			*/
-#define MRT6_TABLE	(MRT6_BASE+9)	/* Specify mroute table ID		*/
-
-#define SIOCGETMIFCNT_IN6	SIOCPROTOPRIVATE	/* IP protocol privates */
-#define SIOCGETSGCNT_IN6	(SIOCPROTOPRIVATE+1)
-#define SIOCGETRPF	(SIOCPROTOPRIVATE+2)
-
-#define MAXMIFS		32
-typedef unsigned long mifbitmap_t;	/* User mode code depends on this lot */
-typedef unsigned short mifi_t;
-#define ALL_MIFS	((mifi_t)(-1))
-
-#ifndef IF_SETSIZE
-#define IF_SETSIZE	256
-#endif
-
-typedef	__u32		if_mask;
-#define NIFBITS (sizeof(if_mask) * 8)        /* bits per mask */
-
-#if !defined(__KERNEL__)
-#if !defined(DIV_ROUND_UP)
-#define	DIV_ROUND_UP(x,y)	(((x) + ((y) - 1)) / (y))
-#endif
-#endif
-
-typedef struct if_set {
-	if_mask ifs_bits[DIV_ROUND_UP(IF_SETSIZE, NIFBITS)];
-} if_set;
-
-#define IF_SET(n, p)    ((p)->ifs_bits[(n)/NIFBITS] |= (1 << ((n) % NIFBITS)))
-#define IF_CLR(n, p)    ((p)->ifs_bits[(n)/NIFBITS] &= ~(1 << ((n) % NIFBITS)))
-#define IF_ISSET(n, p)  ((p)->ifs_bits[(n)/NIFBITS] & (1 << ((n) % NIFBITS)))
-#define IF_COPY(f, t)   bcopy(f, t, sizeof(*(f)))
-#define IF_ZERO(p)      bzero(p, sizeof(*(p)))
-
-/*
- *	Passed by mrouted for an MRT_ADD_MIF - again we use the
- *	mrouted 3.6 structures for compatibility
- */
-
-struct mif6ctl {
-	mifi_t	mif6c_mifi;		/* Index of MIF */
-	unsigned char mif6c_flags;	/* MIFF_ flags */
-	unsigned char vifc_threshold;	/* ttl limit */
-	__u16	 mif6c_pifi;		/* the index of the physical IF */
-	unsigned int vifc_rate_limit;	/* Rate limiter values (NI) */
-};
-
-#define MIFF_REGISTER	0x1	/* register vif	*/
-
-/*
- *	Cache manipulation structures for mrouted and PIMd
- */
-
-struct mf6cctl {
-	struct sockaddr_in6 mf6cc_origin;		/* Origin of mcast	*/
-	struct sockaddr_in6 mf6cc_mcastgrp;		/* Group in question	*/
-	mifi_t	mf6cc_parent;			/* Where it arrived	*/
-	struct if_set mf6cc_ifset;		/* Where it is going */
-};
-
-/*
- *	Group count retrieval for pim6sd
- */
-
-struct sioc_sg_req6 {
-	struct sockaddr_in6 src;
-	struct sockaddr_in6 grp;
-	unsigned long pktcnt;
-	unsigned long bytecnt;
-	unsigned long wrong_if;
-};
-
-/*
- *	To get vif packet counts
- */
-
-struct sioc_mif_req6 {
-	mifi_t	mifi;		/* Which iface */
-	unsigned long icount;	/* In packets */
-	unsigned long ocount;	/* Out packets */
-	unsigned long ibytes;	/* In bytes */
-	unsigned long obytes;	/* Out bytes */
-};
-
-/*
- *	That's all usermode folks
- */
-
-#ifdef __KERNEL__
-
-#include <linux/pim.h>
-#include <linux/skbuff.h>	/* for struct sk_buff_head */
-#include <net/net_namespace.h>
-
-#ifdef CONFIG_IPV6_MROUTE
-static inline int ip6_mroute_opt(int opt)
-{
-	return (opt >= MRT6_BASE) && (opt <= MRT6_BASE + 10);
-}
-#else
-static inline int ip6_mroute_opt(int opt)
-{
-	return 0;
-}
-#endif
-
-struct sock;
-
-#ifdef CONFIG_IPV6_MROUTE
-extern int ip6_mroute_setsockopt(struct sock *, int, char __user *, unsigned int);
-extern int ip6_mroute_getsockopt(struct sock *, int, char __user *, int __user *);
-extern int ip6_mr_input(struct sk_buff *skb);
-extern int ip6mr_ioctl(struct sock *sk, int cmd, void __user *arg);
-extern int ip6mr_compat_ioctl(struct sock *sk, unsigned int cmd, void __user *arg);
-extern int ip6_mr_init(void);
-extern void ip6_mr_cleanup(void);
-#else
-static inline
-int ip6_mroute_setsockopt(struct sock *sock,
-			  int optname, char __user *optval, unsigned int optlen)
-{
-	return -ENOPROTOOPT;
-}
-
-static inline
-int ip6_mroute_getsockopt(struct sock *sock,
-			  int optname, char __user *optval, int __user *optlen)
-{
-	return -ENOPROTOOPT;
-}
-
-static inline
-int ip6mr_ioctl(struct sock *sk, int cmd, void __user *arg)
-{
-	return -ENOIOCTLCMD;
-}
-
-static inline int ip6_mr_init(void)
-{
-	return 0;
-}
-
-static inline void ip6_mr_cleanup(void)
-{
-	return;
-}
-#endif
-
-struct mif_device {
-	struct net_device 	*dev;			/* Device we are using */
-	unsigned long	bytes_in,bytes_out;
-	unsigned long	pkt_in,pkt_out;		/* Statistics 			*/
-	unsigned long	rate_limit;		/* Traffic shaping (NI) 	*/
-	unsigned char	threshold;		/* TTL threshold 		*/
-	unsigned short	flags;			/* Control flags 		*/
-	int		link;			/* Physical interface index	*/
-};
-
-#define VIFF_STATIC 0x8000
-
-struct mfc6_cache {
-	struct list_head list;
-	struct in6_addr mf6c_mcastgrp;			/* Group the entry belongs to 	*/
-	struct in6_addr mf6c_origin;			/* Source of packet 		*/
-	mifi_t mf6c_parent;			/* Source interface		*/
-	int mfc_flags;				/* Flags on line		*/
-
-	union {
-		struct {
-			unsigned long expires;
-			struct sk_buff_head unresolved;	/* Unresolved buffers		*/
-		} unres;
-		struct {
-			unsigned long last_assert;
-			int minvif;
-			int maxvif;
-			unsigned long bytes;
-			unsigned long pkt;
-			unsigned long wrong_if;
-			unsigned char ttls[MAXMIFS];	/* TTL thresholds		*/
-		} res;
-	} mfc_un;
-};
-
-#define MFC_STATIC		1
-#define MFC_NOTIFY		2
-
-#define MFC6_LINES		64
-
-#define MFC6_HASH(a, g) (((__force u32)(a)->s6_addr32[0] ^ \
-			  (__force u32)(a)->s6_addr32[1] ^ \
-			  (__force u32)(a)->s6_addr32[2] ^ \
-			  (__force u32)(a)->s6_addr32[3] ^ \
-			  (__force u32)(g)->s6_addr32[0] ^ \
-			  (__force u32)(g)->s6_addr32[1] ^ \
-			  (__force u32)(g)->s6_addr32[2] ^ \
-			  (__force u32)(g)->s6_addr32[3]) % MFC6_LINES)
-
-#define MFC_ASSERT_THRESH (3*HZ)		/* Maximal freq. of asserts */
-
-#endif
-
-#ifdef __KERNEL__
-struct rtmsg;
-extern int ip6mr_get_route(struct net *net, struct sk_buff *skb,
-			   struct rtmsg *rtm, int nowait);
-
-#ifdef CONFIG_IPV6_MROUTE
-extern struct sock *mroute6_socket(struct net *net, struct sk_buff *skb);
-extern int ip6mr_sk_done(struct sock *sk);
-#else
-static inline struct sock *mroute6_socket(struct net *net, struct sk_buff *skb)
-{
-	return NULL;
-}
-static inline int ip6mr_sk_done(struct sock *sk)
-{
-	return 0;
-}
-#endif
-#endif
-
-/*
- * Structure used to communicate from kernel to multicast router.
- * We'll overlay the structure onto an MLD header (not an IPv6 heder like igmpmsg{}
- * used for IPv4 implementation). This is because this structure will be passed via an
- * IPv6 raw socket, on which an application will only receiver the payload i.e the data after
- * the IPv6 header and all the extension headers. (See section 3 of RFC 3542)
- */
-
-struct mrt6msg {
-#define MRT6MSG_NOCACHE		1
-#define MRT6MSG_WRONGMIF	2
-#define MRT6MSG_WHOLEPKT	3		/* used for use level encap */
-	__u8		im6_mbz;		/* must be zero		   */
-	__u8		im6_msgtype;		/* what type of message    */
-	__u16		im6_mif;		/* mif rec'd on		   */
-	__u32		im6_pad;		/* padding for 64 bit arch */
-	struct in6_addr	im6_src, im6_dst;
-};
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/msdos_fs.h b/ANDROID_3.4.5/include/linux/msdos_fs.h
deleted file mode 100644
index f38d4f0a..00000000
--- a/ANDROID_3.4.5/include/linux/msdos_fs.h
+++ /dev/null
@@ -1,185 +0,0 @@
-#ifndef _LINUX_MSDOS_FS_H
-#define _LINUX_MSDOS_FS_H
-
-#include <linux/types.h>
-#include <linux/magic.h>
-#include <asm/byteorder.h>
-
-/*
- * The MS-DOS filesystem constants/structures
- */
-
-#define SECTOR_SIZE	512		/* sector size (bytes) */
-#define SECTOR_BITS	9		/* log2(SECTOR_SIZE) */
-#define MSDOS_DPB	(MSDOS_DPS)	/* dir entries per block */
-#define MSDOS_DPB_BITS	4		/* log2(MSDOS_DPB) */
-#define MSDOS_DPS	(SECTOR_SIZE / sizeof(struct msdos_dir_entry))
-#define MSDOS_DPS_BITS	4		/* log2(MSDOS_DPS) */
-#define MSDOS_LONGNAME	256		/* maximum name length */
-#define CF_LE_W(v)	le16_to_cpu(v)
-#define CF_LE_L(v)	le32_to_cpu(v)
-#define CT_LE_W(v)	cpu_to_le16(v)
-#define CT_LE_L(v)	cpu_to_le32(v)
-
-
-#define MSDOS_ROOT_INO	1	/* == MINIX_ROOT_INO */
-#define MSDOS_DIR_BITS	5	/* log2(sizeof(struct msdos_dir_entry)) */
-
-/* directory limit */
-#define FAT_MAX_DIR_ENTRIES	(65536)
-#define FAT_MAX_DIR_SIZE	(FAT_MAX_DIR_ENTRIES << MSDOS_DIR_BITS)
-
-#define ATTR_NONE	0	/* no attribute bits */
-#define ATTR_RO		1	/* read-only */
-#define ATTR_HIDDEN	2	/* hidden */
-#define ATTR_SYS	4	/* system */
-#define ATTR_VOLUME	8	/* volume label */
-#define ATTR_DIR	16	/* directory */
-#define ATTR_ARCH	32	/* archived */
-
-/* attribute bits that are copied "as is" */
-#define ATTR_UNUSED	(ATTR_VOLUME | ATTR_ARCH | ATTR_SYS | ATTR_HIDDEN)
-/* bits that are used by the Windows 95/Windows NT extended FAT */
-#define ATTR_EXT	(ATTR_RO | ATTR_HIDDEN | ATTR_SYS | ATTR_VOLUME)
-
-#define CASE_LOWER_BASE	8	/* base is lower case */
-#define CASE_LOWER_EXT	16	/* extension is lower case */
-
-#define DELETED_FLAG	0xe5	/* marks file as deleted when in name[0] */
-#define IS_FREE(n)	(!*(n) || *(n) == DELETED_FLAG)
-
-#define FAT_LFN_LEN	255	/* maximum long name length */
-#define MSDOS_NAME	11	/* maximum name length */
-#define MSDOS_SLOTS	21	/* max # of slots for short and long names */
-#define MSDOS_DOT	".          "	/* ".", padded to MSDOS_NAME chars */
-#define MSDOS_DOTDOT	"..         "	/* "..", padded to MSDOS_NAME chars */
-
-#define FAT_FIRST_ENT(s, x)	((MSDOS_SB(s)->fat_bits == 32 ? 0x0FFFFF00 : \
-	MSDOS_SB(s)->fat_bits == 16 ? 0xFF00 : 0xF00) | (x))
-
-/* start of data cluster's entry (number of reserved clusters) */
-#define FAT_START_ENT	2
-
-/* maximum number of clusters */
-#define MAX_FAT12	0xFF4
-#define MAX_FAT16	0xFFF4
-#define MAX_FAT32	0x0FFFFFF6
-#define MAX_FAT(s)	(MSDOS_SB(s)->fat_bits == 32 ? MAX_FAT32 : \
-	MSDOS_SB(s)->fat_bits == 16 ? MAX_FAT16 : MAX_FAT12)
-
-/* bad cluster mark */
-#define BAD_FAT12	0xFF7
-#define BAD_FAT16	0xFFF7
-#define BAD_FAT32	0x0FFFFFF7
-
-/* standard EOF */
-#define EOF_FAT12	0xFFF
-#define EOF_FAT16	0xFFFF
-#define EOF_FAT32	0x0FFFFFFF
-
-#define FAT_ENT_FREE	(0)
-#define FAT_ENT_BAD	(BAD_FAT32)
-#define FAT_ENT_EOF	(EOF_FAT32)
-
-#define FAT_FSINFO_SIG1	0x41615252
-#define FAT_FSINFO_SIG2	0x61417272
-#define IS_FSINFO(x)	(le32_to_cpu((x)->signature1) == FAT_FSINFO_SIG1 \
-			 && le32_to_cpu((x)->signature2) == FAT_FSINFO_SIG2)
-
-struct __fat_dirent {
-	long		d_ino;
-	__kernel_off_t	d_off;
-	unsigned short	d_reclen;
-	char		d_name[256]; /* We must not include limits.h! */
-};
-
-/*
- * ioctl commands
- */
-#define VFAT_IOCTL_READDIR_BOTH		_IOR('r', 1, struct __fat_dirent[2])
-#define VFAT_IOCTL_READDIR_SHORT	_IOR('r', 2, struct __fat_dirent[2])
-/* <linux/videotext.h> has used 0x72 ('r') in collision, so skip a few */
-#define FAT_IOCTL_GET_ATTRIBUTES	_IOR('r', 0x10, __u32)
-#define FAT_IOCTL_SET_ATTRIBUTES	_IOW('r', 0x11, __u32)
-#define VFAT_IOCTL_GET_VOLUME_ID	_IOR('r', 0x12, __u32)
-
-struct fat_boot_sector {
-	__u8	ignored[3];	/* Boot strap short or near jump */
-	__u8	system_id[8];	/* Name - can be used to special case
-				   partition manager volumes */
-	__u8	sector_size[2];	/* bytes per logical sector */
-	__u8	sec_per_clus;	/* sectors/cluster */
-	__le16	reserved;	/* reserved sectors */
-	__u8	fats;		/* number of FATs */
-	__u8	dir_entries[2];	/* root directory entries */
-	__u8	sectors[2];	/* number of sectors */
-	__u8	media;		/* media code */
-	__le16	fat_length;	/* sectors/FAT */
-	__le16	secs_track;	/* sectors per track */
-	__le16	heads;		/* number of heads */
-	__le32	hidden;		/* hidden sectors (unused) */
-	__le32	total_sect;	/* number of sectors (if sectors == 0) */
-
-	/* The following fields are only used by FAT32 */
-	__le32	fat32_length;	/* sectors/FAT */
-	__le16	flags;		/* bit 8: fat mirroring, low 4: active fat */
-	__u8	version[2];	/* major, minor filesystem version */
-	__le32	root_cluster;	/* first cluster in root directory */
-	__le16	info_sector;	/* filesystem info sector */
-	__le16	backup_boot;	/* backup boot sector */
-	__le16	reserved2[6];	/* Unused */
-};
-
-struct fat_boot_fsinfo {
-	__le32   signature1;	/* 0x41615252L */
-	__le32   reserved1[120];	/* Nothing as far as I can tell */
-	__le32   signature2;	/* 0x61417272L */
-	__le32   free_clusters;	/* Free cluster count.  -1 if unknown */
-	__le32   next_cluster;	/* Most recently allocated cluster */
-	__le32   reserved2[4];
-};
-
-struct fat_boot_bsx {
-	__u8     drive;		    /* drive number */
-	__u8     reserved1;
-	__u8     signature;	    /* extended boot signature */
-	__u8     vol_id[4];     /* volume ID */
-	__u8     vol_label[11]; /* volume label */
-	__u8     type[8];       /* file system type */
-};
-#define FAT16_BSX_OFFSET	36 /* offset of fat_boot_bsx in FAT12 and FAT16 */
-#define FAT32_BSX_OFFSET	64 /* offset of fat_boot_bsx in FAT32 */
-
-struct msdos_dir_entry {
-	__u8	name[MSDOS_NAME];/* name and extension */
-	__u8	attr;		/* attribute bits */
-	__u8    lcase;		/* Case for base and extension */
-	__u8	ctime_cs;	/* Creation time, centiseconds (0-199) */
-	__le16	ctime;		/* Creation time */
-	__le16	cdate;		/* Creation date */
-	__le16	adate;		/* Last access date */
-	__le16	starthi;	/* High 16 bits of cluster in FAT32 */
-	__le16	time,date,start;/* time, date and first cluster */
-	__le32	size;		/* file size (in bytes) */
-};
-
-/* Up to 13 characters of the name */
-struct msdos_dir_slot {
-	__u8    id;		/* sequence number for slot */
-	__u8    name0_4[10];	/* first 5 characters in name */
-	__u8    attr;		/* attribute byte */
-	__u8    reserved;	/* always 0 */
-	__u8    alias_checksum;	/* checksum for 8.3 alias */
-	__u8    name5_10[12];	/* 6 more characters in name */
-	__le16   start;		/* starting cluster number, 0 in long slots */
-	__u8    name11_12[4];	/* last 2 characters in name */
-};
-
-#ifdef __KERNEL__
-/* media of boot sector */
-static inline int fat_valid_media(u8 media)
-{
-	return 0xf8 <= media || media == 0xf0;
-}
-#endif /* !__KERNEL__ */
-#endif /* !_LINUX_MSDOS_FS_H */
diff --git a/ANDROID_3.4.5/include/linux/msg.h b/ANDROID_3.4.5/include/linux/msg.h
deleted file mode 100644
index 56abf155..00000000
--- a/ANDROID_3.4.5/include/linux/msg.h
+++ /dev/null
@@ -1,112 +0,0 @@
-#ifndef _LINUX_MSG_H
-#define _LINUX_MSG_H
-
-#include <linux/ipc.h>
-
-/* ipcs ctl commands */
-#define MSG_STAT 11
-#define MSG_INFO 12
-
-/* msgrcv options */
-#define MSG_NOERROR     010000  /* no error if message is too big */
-#define MSG_EXCEPT      020000  /* recv any msg except of specified type.*/
-
-/* Obsolete, used only for backwards compatibility and libc5 compiles */
-struct msqid_ds {
-	struct ipc_perm msg_perm;
-	struct msg *msg_first;		/* first message on queue,unused  */
-	struct msg *msg_last;		/* last message in queue,unused */
-	__kernel_time_t msg_stime;	/* last msgsnd time */
-	__kernel_time_t msg_rtime;	/* last msgrcv time */
-	__kernel_time_t msg_ctime;	/* last change time */
-	unsigned long  msg_lcbytes;	/* Reuse junk fields for 32 bit */
-	unsigned long  msg_lqbytes;	/* ditto */
-	unsigned short msg_cbytes;	/* current number of bytes on queue */
-	unsigned short msg_qnum;	/* number of messages in queue */
-	unsigned short msg_qbytes;	/* max number of bytes on queue */
-	__kernel_ipc_pid_t msg_lspid;	/* pid of last msgsnd */
-	__kernel_ipc_pid_t msg_lrpid;	/* last receive pid */
-};
-
-/* Include the definition of msqid64_ds */
-#include <asm/msgbuf.h>
-
-/* message buffer for msgsnd and msgrcv calls */
-struct msgbuf {
-	long mtype;         /* type of message */
-	char mtext[1];      /* message text */
-};
-
-/* buffer for msgctl calls IPC_INFO, MSG_INFO */
-struct msginfo {
-	int msgpool;
-	int msgmap; 
-	int msgmax; 
-	int msgmnb; 
-	int msgmni; 
-	int msgssz; 
-	int msgtql; 
-	unsigned short  msgseg; 
-};
-
-/*
- * Scaling factor to compute msgmni:
- * the memory dedicated to msg queues (msgmni * msgmnb) should occupy
- * at most 1/MSG_MEM_SCALE of the lowmem (see the formula in ipc/msg.c):
- * up to 8MB       : msgmni = 16 (MSGMNI)
- * 4 GB            : msgmni = 8K
- * more than 16 GB : msgmni = 32K (IPCMNI)
- */
-#define MSG_MEM_SCALE 32
-
-#define MSGMNI    16   /* <= IPCMNI */     /* max # of msg queue identifiers */
-#define MSGMAX  8192   /* <= INT_MAX */   /* max size of message (bytes) */
-#define MSGMNB 16384   /* <= INT_MAX */   /* default max size of a message queue */
-
-/* unused */
-#define MSGPOOL (MSGMNI * MSGMNB / 1024) /* size in kbytes of message pool */
-#define MSGTQL  MSGMNB            /* number of system message headers */
-#define MSGMAP  MSGMNB            /* number of entries in message map */
-#define MSGSSZ  16                /* message segment size */
-#define __MSGSEG ((MSGPOOL * 1024) / MSGSSZ) /* max no. of segments */
-#define MSGSEG (__MSGSEG <= 0xffff ? __MSGSEG : 0xffff)
-
-#ifdef __KERNEL__
-#include <linux/list.h>
-
-/* one msg_msg structure for each message */
-struct msg_msg {
-	struct list_head m_list; 
-	long  m_type;          
-	int m_ts;           /* message text size */
-	struct msg_msgseg* next;
-	void *security;
-	/* the actual message follows immediately */
-};
-
-/* one msq_queue structure for each present queue on the system */
-struct msg_queue {
-	struct kern_ipc_perm q_perm;
-	time_t q_stime;			/* last msgsnd time */
-	time_t q_rtime;			/* last msgrcv time */
-	time_t q_ctime;			/* last change time */
-	unsigned long q_cbytes;		/* current number of bytes on queue */
-	unsigned long q_qnum;		/* number of messages in queue */
-	unsigned long q_qbytes;		/* max number of bytes on queue */
-	pid_t q_lspid;			/* pid of last msgsnd */
-	pid_t q_lrpid;			/* last receive pid */
-
-	struct list_head q_messages;
-	struct list_head q_receivers;
-	struct list_head q_senders;
-};
-
-/* Helper routines for sys_msgsnd and sys_msgrcv */
-extern long do_msgsnd(int msqid, long mtype, void __user *mtext,
-			size_t msgsz, int msgflg);
-extern long do_msgrcv(int msqid, long *pmtype, void __user *mtext,
-			size_t msgsz, long msgtyp, int msgflg);
-
-#endif /* __KERNEL__ */
-
-#endif /* _LINUX_MSG_H */
diff --git a/ANDROID_3.4.5/include/linux/msi.h b/ANDROID_3.4.5/include/linux/msi.h
deleted file mode 100644
index ce93a341..00000000
--- a/ANDROID_3.4.5/include/linux/msi.h
+++ /dev/null
@@ -1,62 +0,0 @@
-#ifndef LINUX_MSI_H
-#define LINUX_MSI_H
-
-#include <linux/kobject.h>
-#include <linux/list.h>
-
-struct msi_msg {
-	u32	address_lo;	/* low 32 bits of msi message address */
-	u32	address_hi;	/* high 32 bits of msi message address */
-	u32	data;		/* 16 bits of msi message data */
-};
-
-/* Helper functions */
-struct irq_data;
-struct msi_desc;
-extern void mask_msi_irq(struct irq_data *data);
-extern void unmask_msi_irq(struct irq_data *data);
-extern void __read_msi_msg(struct msi_desc *entry, struct msi_msg *msg);
-extern void __get_cached_msi_msg(struct msi_desc *entry, struct msi_msg *msg);
-extern void __write_msi_msg(struct msi_desc *entry, struct msi_msg *msg);
-extern void read_msi_msg(unsigned int irq, struct msi_msg *msg);
-extern void get_cached_msi_msg(unsigned int irq, struct msi_msg *msg);
-extern void write_msi_msg(unsigned int irq, struct msi_msg *msg);
-
-struct msi_desc {
-	struct {
-		__u8	is_msix	: 1;
-		__u8	multiple: 3;	/* log2 number of messages */
-		__u8	maskbit	: 1; 	/* mask-pending bit supported ?   */
-		__u8	is_64	: 1;	/* Address size: 0=32bit 1=64bit  */
-		__u8	pos;	 	/* Location of the msi capability */
-		__u16	entry_nr;    	/* specific enabled entry 	  */
-		unsigned default_irq;	/* default pre-assigned irq	  */
-	} msi_attrib;
-
-	u32 masked;			/* mask bits */
-	unsigned int irq;
-	struct list_head list;
-
-	union {
-		void __iomem *mask_base;
-		u8 mask_pos;
-	};
-	struct pci_dev *dev;
-
-	/* Last set MSI message */
-	struct msi_msg msg;
-
-	struct kobject kobj;
-};
-
-/*
- * The arch hook for setup up msi irqs
- */
-int arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc);
-void arch_teardown_msi_irq(unsigned int irq);
-extern int arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type);
-extern void arch_teardown_msi_irqs(struct pci_dev *dev);
-extern int arch_msi_check_device(struct pci_dev* dev, int nvec, int type);
-
-
-#endif /* LINUX_MSI_H */
diff --git a/ANDROID_3.4.5/include/linux/msm_mdp.h b/ANDROID_3.4.5/include/linux/msm_mdp.h
deleted file mode 100644
index fe722c1f..00000000
--- a/ANDROID_3.4.5/include/linux/msm_mdp.h
+++ /dev/null
@@ -1,79 +0,0 @@
-/* include/linux/msm_mdp.h
- *
- * Copyright (C) 2007 Google Incorporated
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-#ifndef _MSM_MDP_H_
-#define _MSM_MDP_H_
-
-#include <linux/types.h>
-
-#define MSMFB_IOCTL_MAGIC 'm'
-#define MSMFB_GRP_DISP          _IOW(MSMFB_IOCTL_MAGIC, 1, unsigned int)
-#define MSMFB_BLIT              _IOW(MSMFB_IOCTL_MAGIC, 2, unsigned int)
-
-enum {
-	MDP_RGB_565,		/* RGB 565 planar */
-	MDP_XRGB_8888,		/* RGB 888 padded */
-	MDP_Y_CBCR_H2V2,	/* Y and CbCr, pseudo planar w/ Cb is in MSB */
-	MDP_ARGB_8888,		/* ARGB 888 */
-	MDP_RGB_888,		/* RGB 888 planar */
-	MDP_Y_CRCB_H2V2,	/* Y and CrCb, pseudo planar w/ Cr is in MSB */
-	MDP_YCRYCB_H2V1,	/* YCrYCb interleave */
-	MDP_Y_CRCB_H2V1,	/* Y and CrCb, pseduo planar w/ Cr is in MSB */
-	MDP_Y_CBCR_H2V1,	/* Y and CrCb, pseduo planar w/ Cr is in MSB */
-	MDP_RGBA_8888,		/* ARGB 888 */
-	MDP_BGRA_8888,		/* ABGR 888 */
-	MDP_RGBX_8888,		/* RGBX 888 */
-	MDP_IMGTYPE_LIMIT	/* Non valid image type after this enum */
-};
-
-enum {
-	PMEM_IMG,
-	FB_IMG,
-};
-
-/* flag values */
-#define MDP_ROT_NOP	0
-#define MDP_FLIP_LR	0x1
-#define MDP_FLIP_UD	0x2
-#define MDP_ROT_90	0x4
-#define MDP_ROT_180	(MDP_FLIP_UD|MDP_FLIP_LR)
-#define MDP_ROT_270	(MDP_ROT_90|MDP_FLIP_UD|MDP_FLIP_LR)
-#define MDP_DITHER	0x8
-#define MDP_BLUR	0x10
-
-#define MDP_TRANSP_NOP	0xffffffff
-#define MDP_ALPHA_NOP	0xff
-
-struct mdp_rect {
-	u32 x, y, w, h;
-};
-
-struct mdp_img {
-	u32 width, height, format, offset;
-	int memory_id;		/* the file descriptor */
-};
-
-struct mdp_blit_req {
-	struct mdp_img src;
-	struct mdp_img dst;
-	struct mdp_rect src_rect;
-	struct mdp_rect dst_rect;
-	u32 alpha, transp_mask, flags;
-};
-
-struct mdp_blit_req_list {
-	u32 count;
-	struct mdp_blit_req req[];
-};
-
-#endif /* _MSM_MDP_H_ */
diff --git a/ANDROID_3.4.5/include/linux/mt5931_6622.h b/ANDROID_3.4.5/include/linux/mt5931_6622.h
deleted file mode 100755
index e7715119..00000000
--- a/ANDROID_3.4.5/include/linux/mt5931_6622.h
+++ /dev/null
@@ -1,26 +0,0 @@
-
-
-#ifndef __MT5931__H__
-#define __MT5931__H__
-
-struct mt5931_sdio_eint_platform_data {
-	/* used for sdio eint. */
-	int sdio_eint;
-};
-
-struct mtk_mt5931_platform_data {
-	/* GPIO pin config */
-	int pmu;
-	int rst;
-};
-
-struct mtk_mt6622_platform_data {
-	/* GPIO pin config */
-	int pmu;
-	int rst;
-
-	/* used for bt eint. */
-	int bt_eint;
-};
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/mtd/bbm.h b/ANDROID_3.4.5/include/linux/mtd/bbm.h
deleted file mode 100644
index 5bc50e08..00000000
--- a/ANDROID_3.4.5/include/linux/mtd/bbm.h
+++ /dev/null
@@ -1,176 +0,0 @@
-/*
- *  linux/include/linux/mtd/bbm.h
- *
- *  NAND family Bad Block Management (BBM) header file
- *    - Bad Block Table (BBT) implementation
- *
- *  Copyright © 2005 Samsung Electronics
- *  Kyungmin Park <kyungmin.park@samsung.com>
- *
- *  Copyright © 2000-2005
- *  Thomas Gleixner <tglx@linuxtronix.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- *
- */
-#ifndef __LINUX_MTD_BBM_H
-#define __LINUX_MTD_BBM_H
-
-/* The maximum number of NAND chips in an array */
-#define NAND_MAX_CHIPS		8
-
-/**
- * struct nand_bbt_descr - bad block table descriptor
- * @options:	options for this descriptor
- * @pages:	the page(s) where we find the bbt, used with option BBT_ABSPAGE
- *		when bbt is searched, then we store the found bbts pages here.
- *		Its an array and supports up to 8 chips now
- * @offs:	offset of the pattern in the oob area of the page
- * @veroffs:	offset of the bbt version counter in the oob are of the page
- * @version:	version read from the bbt page during scan
- * @len:	length of the pattern, if 0 no pattern check is performed
- * @maxblocks:	maximum number of blocks to search for a bbt. This number of
- *		blocks is reserved at the end of the device where the tables are
- *		written.
- * @reserved_block_code: if non-0, this pattern denotes a reserved (rather than
- *              bad) block in the stored bbt
- * @pattern:	pattern to identify bad block table or factory marked good /
- *		bad blocks, can be NULL, if len = 0
- *
- * Descriptor for the bad block table marker and the descriptor for the
- * pattern which identifies good and bad blocks. The assumption is made
- * that the pattern and the version count are always located in the oob area
- * of the first block.
- */
-struct nand_bbt_descr {
-	int options;
-	int pages[NAND_MAX_CHIPS];
-	int offs;
-	int veroffs;
-	uint8_t version[NAND_MAX_CHIPS];
-	int len;
-	int maxblocks;
-	int reserved_block_code;
-	uint8_t *pattern;
-	int	page_offset[2]; /* used to record bad block signature in which pages.*/
-};
-
-/* Options for the bad block table descriptors */
-
-/* The number of bits used per block in the bbt on the device */
-#define NAND_BBT_NRBITS_MSK	0x0000000F
-#define NAND_BBT_1BIT		0x00000001
-#define NAND_BBT_2BIT		0x00000002
-#define NAND_BBT_4BIT		0x00000004
-#define NAND_BBT_8BIT		0x00000008
-/* The bad block table is in the last good block of the device */
-#define NAND_BBT_LASTBLOCK	0x00000010
-/* The bbt is at the given page, else we must scan for the bbt */
-#define NAND_BBT_ABSPAGE	0x00000020
-/* The bbt is at the given page, else we must scan for the bbt */
-#define NAND_BBT_SEARCH		0x00000040
-/* bbt is stored per chip on multichip devices */
-#define NAND_BBT_PERCHIP	0x00000080
-/* bbt has a version counter at offset veroffs */
-#define NAND_BBT_VERSION	0x00000100
-/* Create a bbt if none exists */
-#define NAND_BBT_CREATE		0x00000200
-/*
- * Create an empty BBT with no vendor information. Vendor's information may be
- * unavailable, for example, if the NAND controller has a different data and OOB
- * layout or if this information is already purged. Must be used in conjunction
- * with NAND_BBT_CREATE.
- */
-#define NAND_BBT_CREATE_EMPTY	0x00000400
-/* Search good / bad pattern through all pages of a block */
-#define NAND_BBT_SCANALLPAGES	0x00000800
-/* Scan block empty during good / bad block scan */
-#define NAND_BBT_SCANEMPTY	0x00001000
-/* Write bbt if neccecary */
-#define NAND_BBT_WRITE		0x00002000
-/* Read and write back block contents when writing bbt */
-#define NAND_BBT_SAVECONTENT	0x00004000
-/* Search good / bad pattern on the first and the second page */
-#define NAND_BBT_SCAN2NDPAGE	0x00008000
-/* Search good / bad pattern on the last page of the eraseblock */
-#define NAND_BBT_SCANLASTPAGE	0x00010000
-/*
- * Use a flash based bad block table. By default, OOB identifier is saved in
- * OOB area. This option is passed to the default bad block table function.
- */
-#define NAND_BBT_USE_FLASH	0x00020000
-/* Do not store flash based bad block table in OOB area; store it in-band */
-#define NAND_BBT_NO_OOB		0x00040000
-/*
- * Do not write new bad block markers to OOB; useful, e.g., when ECC covers
- * entire spare area. Must be used with NAND_BBT_USE_FLASH.
- */
-#define NAND_BBT_NO_OOB_BBM	0x00080000
-
-/*
- * Flag set by nand_create_default_bbt_descr(), marking that the nand_bbt_descr
- * was allocated dynamicaly and must be freed in nand_release(). Has no meaning
- * in nand_chip.bbt_options.
- */
-#define NAND_BBT_DYNAMICSTRUCT	0x80000000
-
-/* The maximum number of blocks to scan for a bbt */
-#define NAND_BBT_SCAN_MAXBLOCKS	4
-
-/*
- * Constants for oob configuration
- */
-#define NAND_SMALL_BADBLOCK_POS		5
-#define NAND_LARGE_BADBLOCK_POS		0
-#define ONENAND_BADBLOCK_POS		0
-
-/*
- * Bad block scanning errors
- */
-#define ONENAND_BBT_READ_ERROR		1
-#define ONENAND_BBT_READ_ECC_ERROR	2
-#define ONENAND_BBT_READ_FATAL_ERROR	4
-
-/**
- * struct bbm_info - [GENERIC] Bad Block Table data structure
- * @bbt_erase_shift:	[INTERN] number of address bits in a bbt entry
- * @badblockpos:	[INTERN] position of the bad block marker in the oob area
- * @options:		options for this descriptor
- * @bbt:		[INTERN] bad block table pointer
- * @isbad_bbt:		function to determine if a block is bad
- * @badblock_pattern:	[REPLACEABLE] bad block scan pattern used for
- *			initial bad block scan
- * @priv:		[OPTIONAL] pointer to private bbm date
- */
-struct bbm_info {
-	int bbt_erase_shift;
-	int badblockpos;
-	int options;
-
-	uint8_t *bbt;
-
-	int (*isbad_bbt)(struct mtd_info *mtd, loff_t ofs, int allowbbt);
-
-	/* TODO Add more NAND specific fileds */
-	struct nand_bbt_descr *badblock_pattern;
-
-	void *priv;
-};
-
-/* OneNAND BBT interface */
-extern int onenand_scan_bbt(struct mtd_info *mtd, struct nand_bbt_descr *bd);
-extern int onenand_default_bbt(struct mtd_info *mtd);
-
-#endif	/* __LINUX_MTD_BBM_H */
diff --git a/ANDROID_3.4.5/include/linux/mtd/blktrans.h b/ANDROID_3.4.5/include/linux/mtd/blktrans.h
deleted file mode 100644
index ed270bd2..00000000
--- a/ANDROID_3.4.5/include/linux/mtd/blktrans.h
+++ /dev/null
@@ -1,94 +0,0 @@
-/*
- * Copyright © 2003-2010 David Woodhouse <dwmw2@infradead.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- *
- */
-
-#ifndef __MTD_TRANS_H__
-#define __MTD_TRANS_H__
-
-#include <linux/mutex.h>
-#include <linux/kref.h>
-#include <linux/sysfs.h>
-
-struct hd_geometry;
-struct mtd_info;
-struct mtd_blktrans_ops;
-struct file;
-struct inode;
-
-struct mtd_blktrans_dev {
-	struct mtd_blktrans_ops *tr;
-	struct list_head list;
-	struct mtd_info *mtd;
-	struct mutex lock;
-	int devnum;
-	bool bg_stop;
-	unsigned long size;
-	int readonly;
-	int open;
-	struct kref ref;
-	struct gendisk *disk;
-	struct attribute_group *disk_attributes;
-	struct task_struct *thread;
-	struct request_queue *rq;
-	spinlock_t queue_lock;
-	void *priv;
-	fmode_t file_mode;
-};
-
-struct mtd_blktrans_ops {
-	char *name;
-	int major;
-	int part_bits;
-	int blksize;
-	int blkshift;
-
-	/* Access functions */
-	int (*readsect)(struct mtd_blktrans_dev *dev,
-		    unsigned long block, char *buffer);
-	int (*writesect)(struct mtd_blktrans_dev *dev,
-		     unsigned long block, char *buffer);
-	int (*discard)(struct mtd_blktrans_dev *dev,
-		       unsigned long block, unsigned nr_blocks);
-	void (*background)(struct mtd_blktrans_dev *dev);
-
-	/* Block layer ioctls */
-	int (*getgeo)(struct mtd_blktrans_dev *dev, struct hd_geometry *geo);
-	int (*flush)(struct mtd_blktrans_dev *dev);
-
-	/* Called with mtd_table_mutex held; no race with add/remove */
-	int (*open)(struct mtd_blktrans_dev *dev);
-	int (*release)(struct mtd_blktrans_dev *dev);
-
-	/* Called on {de,}registration and on subsequent addition/removal
-	   of devices, with mtd_table_mutex held. */
-	void (*add_mtd)(struct mtd_blktrans_ops *tr, struct mtd_info *mtd);
-	void (*remove_dev)(struct mtd_blktrans_dev *dev);
-
-	struct list_head devs;
-	struct list_head list;
-	struct module *owner;
-};
-
-extern int register_mtd_blktrans(struct mtd_blktrans_ops *tr);
-extern int deregister_mtd_blktrans(struct mtd_blktrans_ops *tr);
-extern int add_mtd_blktrans_dev(struct mtd_blktrans_dev *dev);
-extern int del_mtd_blktrans_dev(struct mtd_blktrans_dev *dev);
-extern int mtd_blktrans_cease_background(struct mtd_blktrans_dev *dev);
-
-
-#endif /* __MTD_TRANS_H__ */
diff --git a/ANDROID_3.4.5/include/linux/mtd/cfi.h b/ANDROID_3.4.5/include/linux/mtd/cfi.h
deleted file mode 100644
index 37ef6b19..00000000
--- a/ANDROID_3.4.5/include/linux/mtd/cfi.h
+++ /dev/null
@@ -1,564 +0,0 @@
-/*
- * Copyright © 2000-2010 David Woodhouse <dwmw2@infradead.org> et al.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- *
- */
-
-#ifndef __MTD_CFI_H__
-#define __MTD_CFI_H__
-
-#include <linux/delay.h>
-#include <linux/types.h>
-#include <linux/bug.h>
-#include <linux/interrupt.h>
-#include <linux/mtd/flashchip.h>
-#include <linux/mtd/map.h>
-#include <linux/mtd/cfi_endian.h>
-#include <linux/mtd/xip.h>
-
-#ifdef CONFIG_MTD_CFI_I1
-#define cfi_interleave(cfi) 1
-#define cfi_interleave_is_1(cfi) (cfi_interleave(cfi) == 1)
-#else
-#define cfi_interleave_is_1(cfi) (0)
-#endif
-
-#ifdef CONFIG_MTD_CFI_I2
-# ifdef cfi_interleave
-#  undef cfi_interleave
-#  define cfi_interleave(cfi) ((cfi)->interleave)
-# else
-#  define cfi_interleave(cfi) 2
-# endif
-#define cfi_interleave_is_2(cfi) (cfi_interleave(cfi) == 2)
-#else
-#define cfi_interleave_is_2(cfi) (0)
-#endif
-
-#ifdef CONFIG_MTD_CFI_I4
-# ifdef cfi_interleave
-#  undef cfi_interleave
-#  define cfi_interleave(cfi) ((cfi)->interleave)
-# else
-#  define cfi_interleave(cfi) 4
-# endif
-#define cfi_interleave_is_4(cfi) (cfi_interleave(cfi) == 4)
-#else
-#define cfi_interleave_is_4(cfi) (0)
-#endif
-
-#ifdef CONFIG_MTD_CFI_I8
-# ifdef cfi_interleave
-#  undef cfi_interleave
-#  define cfi_interleave(cfi) ((cfi)->interleave)
-# else
-#  define cfi_interleave(cfi) 8
-# endif
-#define cfi_interleave_is_8(cfi) (cfi_interleave(cfi) == 8)
-#else
-#define cfi_interleave_is_8(cfi) (0)
-#endif
-
-#ifndef cfi_interleave
-#warning No CONFIG_MTD_CFI_Ix selected. No NOR chip support can work.
-static inline int cfi_interleave(void *cfi)
-{
-	BUG();
-	return 0;
-}
-#endif
-
-static inline int cfi_interleave_supported(int i)
-{
-	switch (i) {
-#ifdef CONFIG_MTD_CFI_I1
-	case 1:
-#endif
-#ifdef CONFIG_MTD_CFI_I2
-	case 2:
-#endif
-#ifdef CONFIG_MTD_CFI_I4
-	case 4:
-#endif
-#ifdef CONFIG_MTD_CFI_I8
-	case 8:
-#endif
-		return 1;
-
-	default:
-		return 0;
-	}
-}
-
-
-/* NB: these values must represents the number of bytes needed to meet the
- *     device type (x8, x16, x32).  Eg. a 32 bit device is 4 x 8 bytes.
- *     These numbers are used in calculations.
- */
-#define CFI_DEVICETYPE_X8  (8 / 8)
-#define CFI_DEVICETYPE_X16 (16 / 8)
-#define CFI_DEVICETYPE_X32 (32 / 8)
-#define CFI_DEVICETYPE_X64 (64 / 8)
-
-
-/* Device Interface Code Assignments from the "Common Flash Memory Interface
- * Publication 100" dated December 1, 2001.
- */
-#define CFI_INTERFACE_X8_ASYNC		0x0000
-#define CFI_INTERFACE_X16_ASYNC		0x0001
-#define CFI_INTERFACE_X8_BY_X16_ASYNC	0x0002
-#define CFI_INTERFACE_X32_ASYNC		0x0003
-#define CFI_INTERFACE_X16_BY_X32_ASYNC	0x0005
-#define CFI_INTERFACE_NOT_ALLOWED	0xffff
-
-
-/* NB: We keep these structures in memory in HOST byteorder, except
- * where individually noted.
- */
-
-/* Basic Query Structure */
-struct cfi_ident {
-	uint8_t  qry[3];
-	uint16_t P_ID;
-	uint16_t P_ADR;
-	uint16_t A_ID;
-	uint16_t A_ADR;
-	uint8_t  VccMin;
-	uint8_t  VccMax;
-	uint8_t  VppMin;
-	uint8_t  VppMax;
-	uint8_t  WordWriteTimeoutTyp;
-	uint8_t  BufWriteTimeoutTyp;
-	uint8_t  BlockEraseTimeoutTyp;
-	uint8_t  ChipEraseTimeoutTyp;
-	uint8_t  WordWriteTimeoutMax;
-	uint8_t  BufWriteTimeoutMax;
-	uint8_t  BlockEraseTimeoutMax;
-	uint8_t  ChipEraseTimeoutMax;
-	uint8_t  DevSize;
-	uint16_t InterfaceDesc;
-	uint16_t MaxBufWriteSize;
-	uint8_t  NumEraseRegions;
-	uint32_t EraseRegionInfo[0]; /* Not host ordered */
-} __attribute__((packed));
-
-/* Extended Query Structure for both PRI and ALT */
-
-struct cfi_extquery {
-	uint8_t  pri[3];
-	uint8_t  MajorVersion;
-	uint8_t  MinorVersion;
-} __attribute__((packed));
-
-/* Vendor-Specific PRI for Intel/Sharp Extended Command Set (0x0001) */
-
-struct cfi_pri_intelext {
-	uint8_t  pri[3];
-	uint8_t  MajorVersion;
-	uint8_t  MinorVersion;
-	uint32_t FeatureSupport; /* if bit 31 is set then an additional uint32_t feature
-				    block follows - FIXME - not currently supported */
-	uint8_t  SuspendCmdSupport;
-	uint16_t BlkStatusRegMask;
-	uint8_t  VccOptimal;
-	uint8_t  VppOptimal;
-	uint8_t  NumProtectionFields;
-	uint16_t ProtRegAddr;
-	uint8_t  FactProtRegSize;
-	uint8_t  UserProtRegSize;
-	uint8_t  extra[0];
-} __attribute__((packed));
-
-struct cfi_intelext_otpinfo {
-	uint32_t ProtRegAddr;
-	uint16_t FactGroups;
-	uint8_t  FactProtRegSize;
-	uint16_t UserGroups;
-	uint8_t  UserProtRegSize;
-} __attribute__((packed));
-
-struct cfi_intelext_blockinfo {
-	uint16_t NumIdentBlocks;
-	uint16_t BlockSize;
-	uint16_t MinBlockEraseCycles;
-	uint8_t  BitsPerCell;
-	uint8_t  BlockCap;
-} __attribute__((packed));
-
-struct cfi_intelext_regioninfo {
-	uint16_t NumIdentPartitions;
-	uint8_t  NumOpAllowed;
-	uint8_t  NumOpAllowedSimProgMode;
-	uint8_t  NumOpAllowedSimEraMode;
-	uint8_t  NumBlockTypes;
-	struct cfi_intelext_blockinfo BlockTypes[1];
-} __attribute__((packed));
-
-struct cfi_intelext_programming_regioninfo {
-	uint8_t  ProgRegShift;
-	uint8_t  Reserved1;
-	uint8_t  ControlValid;
-	uint8_t  Reserved2;
-	uint8_t  ControlInvalid;
-	uint8_t  Reserved3;
-} __attribute__((packed));
-
-/* Vendor-Specific PRI for AMD/Fujitsu Extended Command Set (0x0002) */
-
-struct cfi_pri_amdstd {
-	uint8_t  pri[3];
-	uint8_t  MajorVersion;
-	uint8_t  MinorVersion;
-	uint8_t  SiliconRevision; /* bits 1-0: Address Sensitive Unlock */
-	uint8_t  EraseSuspend;
-	uint8_t  BlkProt;
-	uint8_t  TmpBlkUnprotect;
-	uint8_t  BlkProtUnprot;
-	uint8_t  SimultaneousOps;
-	uint8_t  BurstMode;
-	uint8_t  PageMode;
-	uint8_t  VppMin;
-	uint8_t  VppMax;
-	uint8_t  TopBottom;
-} __attribute__((packed));
-
-/* Vendor-Specific PRI for Atmel chips (command set 0x0002) */
-
-struct cfi_pri_atmel {
-	uint8_t pri[3];
-	uint8_t MajorVersion;
-	uint8_t MinorVersion;
-	uint8_t Features;
-	uint8_t BottomBoot;
-	uint8_t BurstMode;
-	uint8_t PageMode;
-} __attribute__((packed));
-
-struct cfi_pri_query {
-	uint8_t  NumFields;
-	uint32_t ProtField[1]; /* Not host ordered */
-} __attribute__((packed));
-
-struct cfi_bri_query {
-	uint8_t  PageModeReadCap;
-	uint8_t  NumFields;
-	uint32_t ConfField[1]; /* Not host ordered */
-} __attribute__((packed));
-
-#define P_ID_NONE               0x0000
-#define P_ID_INTEL_EXT          0x0001
-#define P_ID_AMD_STD            0x0002
-#define P_ID_INTEL_STD          0x0003
-#define P_ID_AMD_EXT            0x0004
-#define P_ID_WINBOND            0x0006
-#define P_ID_ST_ADV             0x0020
-#define P_ID_MITSUBISHI_STD     0x0100
-#define P_ID_MITSUBISHI_EXT     0x0101
-#define P_ID_SST_PAGE           0x0102
-#define P_ID_SST_OLD            0x0701
-#define P_ID_INTEL_PERFORMANCE  0x0200
-#define P_ID_INTEL_DATA         0x0210
-#define P_ID_RESERVED           0xffff
-
-
-#define CFI_MODE_CFI	1
-#define CFI_MODE_JEDEC	0
-
-struct cfi_private {
-	uint16_t cmdset;
-	void *cmdset_priv;
-	int interleave;
-	int device_type;
-	int cfi_mode;		/* Are we a JEDEC device pretending to be CFI? */
-	int addr_unlock1;
-	int addr_unlock2;
-	struct mtd_info *(*cmdset_setup)(struct map_info *);
-	struct cfi_ident *cfiq; /* For now only one. We insist that all devs
-				  must be of the same type. */
-	int mfr, id;
-	int numchips;
-	map_word sector_erase_cmd;
-	unsigned long chipshift; /* Because they're of the same type */
-	const char *im_name;	 /* inter_module name for cmdset_setup */
-	struct flchip chips[0];  /* per-chip data structure for each chip */
-};
-
-/*
- * Returns the command address according to the given geometry.
- */
-static inline uint32_t cfi_build_cmd_addr(uint32_t cmd_ofs,
-				struct map_info *map, struct cfi_private *cfi)
-{
-	unsigned bankwidth = map_bankwidth(map);
-	unsigned interleave = cfi_interleave(cfi);
-	unsigned type = cfi->device_type;
-	uint32_t addr;
-	
-	addr = (cmd_ofs * type) * interleave;
-
-	/* Modify the unlock address if we are in compatibility mode.
-	 * For 16bit devices on 8 bit busses
-	 * and 32bit devices on 16 bit busses
-	 * set the low bit of the alternating bit sequence of the address.
-	 */
-	if (((type * interleave) > bankwidth) && ((cmd_ofs & 0xff) == 0xaa))
-		addr |= (type >> 1)*interleave;
-
-	return  addr;
-}
-
-/*
- * Transforms the CFI command for the given geometry (bus width & interleave).
- * It looks too long to be inline, but in the common case it should almost all
- * get optimised away.
- */
-static inline map_word cfi_build_cmd(u_long cmd, struct map_info *map, struct cfi_private *cfi)
-{
-	map_word val = { {0} };
-	int wordwidth, words_per_bus, chip_mode, chips_per_word;
-	unsigned long onecmd;
-	int i;
-
-	/* We do it this way to give the compiler a fighting chance
-	   of optimising away all the crap for 'bankwidth' larger than
-	   an unsigned long, in the common case where that support is
-	   disabled */
-	if (map_bankwidth_is_large(map)) {
-		wordwidth = sizeof(unsigned long);
-		words_per_bus = (map_bankwidth(map)) / wordwidth; // i.e. normally 1
-	} else {
-		wordwidth = map_bankwidth(map);
-		words_per_bus = 1;
-	}
-
-	chip_mode = map_bankwidth(map) / cfi_interleave(cfi);
-	chips_per_word = wordwidth * cfi_interleave(cfi) / map_bankwidth(map);
-
-	/* First, determine what the bit-pattern should be for a single
-	   device, according to chip mode and endianness... */
-	switch (chip_mode) {
-	default: BUG();
-	case 1:
-		onecmd = cmd;
-		break;
-	case 2:
-		onecmd = cpu_to_cfi16(map, cmd);
-		break;
-	case 4:
-		onecmd = cpu_to_cfi32(map, cmd);
-		break;
-	}
-
-	/* Now replicate it across the size of an unsigned long, or
-	   just to the bus width as appropriate */
-	switch (chips_per_word) {
-	default: BUG();
-#if BITS_PER_LONG >= 64
-	case 8:
-		onecmd |= (onecmd << (chip_mode * 32));
-#endif
-	case 4:
-		onecmd |= (onecmd << (chip_mode * 16));
-	case 2:
-		onecmd |= (onecmd << (chip_mode * 8));
-	case 1:
-		;
-	}
-
-	/* And finally, for the multi-word case, replicate it
-	   in all words in the structure */
-	for (i=0; i < words_per_bus; i++) {
-		val.x[i] = onecmd;
-	}
-
-	return val;
-}
-#define CMD(x)  cfi_build_cmd((x), map, cfi)
-
-
-static inline unsigned long cfi_merge_status(map_word val, struct map_info *map,
-					   struct cfi_private *cfi)
-{
-	int wordwidth, words_per_bus, chip_mode, chips_per_word;
-	unsigned long onestat, res = 0;
-	int i;
-
-	/* We do it this way to give the compiler a fighting chance
-	   of optimising away all the crap for 'bankwidth' larger than
-	   an unsigned long, in the common case where that support is
-	   disabled */
-	if (map_bankwidth_is_large(map)) {
-		wordwidth = sizeof(unsigned long);
-		words_per_bus = (map_bankwidth(map)) / wordwidth; // i.e. normally 1
-	} else {
-		wordwidth = map_bankwidth(map);
-		words_per_bus = 1;
-	}
-
-	chip_mode = map_bankwidth(map) / cfi_interleave(cfi);
-	chips_per_word = wordwidth * cfi_interleave(cfi) / map_bankwidth(map);
-
-	onestat = val.x[0];
-	/* Or all status words together */
-	for (i=1; i < words_per_bus; i++) {
-		onestat |= val.x[i];
-	}
-
-	res = onestat;
-	switch(chips_per_word) {
-	default: BUG();
-#if BITS_PER_LONG >= 64
-	case 8:
-		res |= (onestat >> (chip_mode * 32));
-#endif
-	case 4:
-		res |= (onestat >> (chip_mode * 16));
-	case 2:
-		res |= (onestat >> (chip_mode * 8));
-	case 1:
-		;
-	}
-
-	/* Last, determine what the bit-pattern should be for a single
-	   device, according to chip mode and endianness... */
-	switch (chip_mode) {
-	case 1:
-		break;
-	case 2:
-		res = cfi16_to_cpu(map, res);
-		break;
-	case 4:
-		res = cfi32_to_cpu(map, res);
-		break;
-	default: BUG();
-	}
-	return res;
-}
-
-#define MERGESTATUS(x) cfi_merge_status((x), map, cfi)
-
-
-/*
- * Sends a CFI command to a bank of flash for the given geometry.
- *
- * Returns the offset in flash where the command was written.
- * If prev_val is non-null, it will be set to the value at the command address,
- * before the command was written.
- */
-static inline uint32_t cfi_send_gen_cmd(u_char cmd, uint32_t cmd_addr, uint32_t base,
-				struct map_info *map, struct cfi_private *cfi,
-				int type, map_word *prev_val)
-{
-	map_word val;
-	uint32_t addr = base + cfi_build_cmd_addr(cmd_addr, map, cfi);
-	val = cfi_build_cmd(cmd, map, cfi);
-
-	if (prev_val)
-		*prev_val = map_read(map, addr);
-
-	map_write(map, val, addr);
-
-	return addr - base;
-}
-
-static inline uint8_t cfi_read_query(struct map_info *map, uint32_t addr)
-{
-	map_word val = map_read(map, addr);
-
-	if (map_bankwidth_is_1(map)) {
-		return val.x[0];
-	} else if (map_bankwidth_is_2(map)) {
-		return cfi16_to_cpu(map, val.x[0]);
-	} else {
-		/* No point in a 64-bit byteswap since that would just be
-		   swapping the responses from different chips, and we are
-		   only interested in one chip (a representative sample) */
-		return cfi32_to_cpu(map, val.x[0]);
-	}
-}
-
-static inline uint16_t cfi_read_query16(struct map_info *map, uint32_t addr)
-{
-	map_word val = map_read(map, addr);
-
-	if (map_bankwidth_is_1(map)) {
-		return val.x[0] & 0xff;
-	} else if (map_bankwidth_is_2(map)) {
-		return cfi16_to_cpu(map, val.x[0]);
-	} else {
-		/* No point in a 64-bit byteswap since that would just be
-		   swapping the responses from different chips, and we are
-		   only interested in one chip (a representative sample) */
-		return cfi32_to_cpu(map, val.x[0]);
-	}
-}
-
-static inline void cfi_udelay(int us)
-{
-	if (us >= 1000) {
-		msleep((us+999)/1000);
-	} else {
-		udelay(us);
-		cond_resched();
-	}
-}
-
-int __xipram cfi_qry_present(struct map_info *map, __u32 base,
-			     struct cfi_private *cfi);
-int __xipram cfi_qry_mode_on(uint32_t base, struct map_info *map,
-			     struct cfi_private *cfi);
-void __xipram cfi_qry_mode_off(uint32_t base, struct map_info *map,
-			       struct cfi_private *cfi);
-
-struct cfi_extquery *cfi_read_pri(struct map_info *map, uint16_t adr, uint16_t size,
-			     const char* name);
-struct cfi_fixup {
-	uint16_t mfr;
-	uint16_t id;
-	void (*fixup)(struct mtd_info *mtd);
-};
-
-#define CFI_MFR_ANY		0xFFFF
-#define CFI_ID_ANY		0xFFFF
-#define CFI_MFR_CONTINUATION	0x007F
-
-#define CFI_MFR_AMD		0x0001
-#define CFI_MFR_AMIC		0x0037
-#define CFI_MFR_ATMEL		0x001F
-#define CFI_MFR_EON		0x001C
-#define CFI_MFR_FUJITSU		0x0004
-#define CFI_MFR_HYUNDAI		0x00AD
-#define CFI_MFR_INTEL		0x0089
-#define CFI_MFR_MACRONIX	0x00C2
-#define CFI_MFR_NEC		0x0010
-#define CFI_MFR_PMC		0x009D
-#define CFI_MFR_SAMSUNG		0x00EC
-#define CFI_MFR_SHARP		0x00B0
-#define CFI_MFR_SST		0x00BF
-#define CFI_MFR_ST		0x0020 /* STMicroelectronics */
-#define CFI_MFR_TOSHIBA		0x0098
-#define CFI_MFR_WINBOND		0x00DA
-
-void cfi_fixup(struct mtd_info *mtd, struct cfi_fixup* fixups);
-
-typedef int (*varsize_frob_t)(struct map_info *map, struct flchip *chip,
-			      unsigned long adr, int len, void *thunk);
-
-int cfi_varsize_frob(struct mtd_info *mtd, varsize_frob_t frob,
-	loff_t ofs, size_t len, void *thunk);
-
-
-#endif /* __MTD_CFI_H__ */
diff --git a/ANDROID_3.4.5/include/linux/mtd/cfi_endian.h b/ANDROID_3.4.5/include/linux/mtd/cfi_endian.h
deleted file mode 100644
index b97a6250..00000000
--- a/ANDROID_3.4.5/include/linux/mtd/cfi_endian.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- * Copyright © 2001-2010 David Woodhouse <dwmw2@infradead.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- *
- */
-
-#include <asm/byteorder.h>
-
-#define CFI_HOST_ENDIAN 1
-#define CFI_LITTLE_ENDIAN 2
-#define CFI_BIG_ENDIAN 3
-
-#if !defined(CONFIG_MTD_CFI_ADV_OPTIONS) || defined(CONFIG_MTD_CFI_NOSWAP)
-#define CFI_DEFAULT_ENDIAN CFI_HOST_ENDIAN
-#elif defined(CONFIG_MTD_CFI_LE_BYTE_SWAP)
-#define CFI_DEFAULT_ENDIAN CFI_LITTLE_ENDIAN
-#elif defined(CONFIG_MTD_CFI_BE_BYTE_SWAP)
-#define CFI_DEFAULT_ENDIAN CFI_BIG_ENDIAN
-#else
-#error No CFI endianness defined
-#endif
-
-#define cfi_default(s) ((s)?:CFI_DEFAULT_ENDIAN)
-#define cfi_be(s) (cfi_default(s) == CFI_BIG_ENDIAN)
-#define cfi_le(s) (cfi_default(s) == CFI_LITTLE_ENDIAN)
-#define cfi_host(s) (cfi_default(s) == CFI_HOST_ENDIAN)
-
-#define cpu_to_cfi8(map, x) (x)
-#define cfi8_to_cpu(map, x) (x)
-#define cpu_to_cfi16(map, x) _cpu_to_cfi(16, (map)->swap, (x))
-#define cpu_to_cfi32(map, x) _cpu_to_cfi(32, (map)->swap, (x))
-#define cpu_to_cfi64(map, x) _cpu_to_cfi(64, (map)->swap, (x))
-#define cfi16_to_cpu(map, x) _cfi_to_cpu(16, (map)->swap, (x))
-#define cfi32_to_cpu(map, x) _cfi_to_cpu(32, (map)->swap, (x))
-#define cfi64_to_cpu(map, x) _cfi_to_cpu(64, (map)->swap, (x))
-
-#define _cpu_to_cfi(w, s, x) (cfi_host(s)?(x):_swap_to_cfi(w, s, x))
-#define _cfi_to_cpu(w, s, x) (cfi_host(s)?(x):_swap_to_cpu(w, s, x))
-#define _swap_to_cfi(w, s, x) (cfi_be(s)?cpu_to_be##w(x):cpu_to_le##w(x))
-#define _swap_to_cpu(w, s, x) (cfi_be(s)?be##w##_to_cpu(x):le##w##_to_cpu(x))
diff --git a/ANDROID_3.4.5/include/linux/mtd/concat.h b/ANDROID_3.4.5/include/linux/mtd/concat.h
deleted file mode 100644
index ccdbe93a..00000000
--- a/ANDROID_3.4.5/include/linux/mtd/concat.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * MTD device concatenation layer definitions
- *
- * Copyright © 2002      Robert Kaiser <rkaiser@sysgo.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- *
- */
-
-#ifndef MTD_CONCAT_H
-#define MTD_CONCAT_H
-
-
-struct mtd_info *mtd_concat_create(
-    struct mtd_info *subdev[],  /* subdevices to concatenate */
-    int num_devs,               /* number of subdevices      */
-    const char *name);          /* name for the new device   */
-
-void mtd_concat_destroy(struct mtd_info *mtd);
-
-#endif
-
diff --git a/ANDROID_3.4.5/include/linux/mtd/doc2000.h b/ANDROID_3.4.5/include/linux/mtd/doc2000.h
deleted file mode 100644
index 0f6fea73..00000000
--- a/ANDROID_3.4.5/include/linux/mtd/doc2000.h
+++ /dev/null
@@ -1,206 +0,0 @@
-/*
- * Linux driver for Disk-On-Chip devices
- *
- * Copyright © 1999 Machine Vision Holdings, Inc.
- * Copyright © 1999-2010 David Woodhouse <dwmw2@infradead.org>
- * Copyright © 2002-2003 Greg Ungerer <gerg@snapgear.com>
- * Copyright © 2002-2003 SnapGear Inc
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- *
- */
-
-#ifndef __MTD_DOC2000_H__
-#define __MTD_DOC2000_H__
-
-#include <linux/mtd/mtd.h>
-#include <linux/mutex.h>
-
-#define DoC_Sig1 0
-#define DoC_Sig2 1
-
-#define DoC_ChipID		0x1000
-#define DoC_DOCStatus		0x1001
-#define DoC_DOCControl		0x1002
-#define DoC_FloorSelect		0x1003
-#define DoC_CDSNControl		0x1004
-#define DoC_CDSNDeviceSelect 	0x1005
-#define DoC_ECCConf 		0x1006
-#define DoC_2k_ECCStatus	0x1007
-
-#define DoC_CDSNSlowIO		0x100d
-#define DoC_ECCSyndrome0	0x1010
-#define DoC_ECCSyndrome1	0x1011
-#define DoC_ECCSyndrome2	0x1012
-#define DoC_ECCSyndrome3	0x1013
-#define DoC_ECCSyndrome4	0x1014
-#define DoC_ECCSyndrome5	0x1015
-#define DoC_AliasResolution 	0x101b
-#define DoC_ConfigInput		0x101c
-#define DoC_ReadPipeInit 	0x101d
-#define DoC_WritePipeTerm 	0x101e
-#define DoC_LastDataRead 	0x101f
-#define DoC_NOP 		0x1020
-
-#define DoC_Mil_CDSN_IO 	0x0800
-#define DoC_2k_CDSN_IO 		0x1800
-
-#define DoC_Mplus_NOP			0x1002
-#define DoC_Mplus_AliasResolution	0x1004
-#define DoC_Mplus_DOCControl		0x1006
-#define DoC_Mplus_AccessStatus		0x1008
-#define DoC_Mplus_DeviceSelect		0x1008
-#define DoC_Mplus_Configuration		0x100a
-#define DoC_Mplus_OutputControl		0x100c
-#define DoC_Mplus_FlashControl		0x1020
-#define DoC_Mplus_FlashSelect 		0x1022
-#define DoC_Mplus_FlashCmd		0x1024
-#define DoC_Mplus_FlashAddress		0x1026
-#define DoC_Mplus_FlashData0		0x1028
-#define DoC_Mplus_FlashData1		0x1029
-#define DoC_Mplus_ReadPipeInit		0x102a
-#define DoC_Mplus_LastDataRead		0x102c
-#define DoC_Mplus_LastDataRead1		0x102d
-#define DoC_Mplus_WritePipeTerm 	0x102e
-#define DoC_Mplus_ECCSyndrome0		0x1040
-#define DoC_Mplus_ECCSyndrome1		0x1041
-#define DoC_Mplus_ECCSyndrome2		0x1042
-#define DoC_Mplus_ECCSyndrome3		0x1043
-#define DoC_Mplus_ECCSyndrome4		0x1044
-#define DoC_Mplus_ECCSyndrome5		0x1045
-#define DoC_Mplus_ECCConf 		0x1046
-#define DoC_Mplus_Toggle		0x1046
-#define DoC_Mplus_DownloadStatus	0x1074
-#define DoC_Mplus_CtrlConfirm		0x1076
-#define DoC_Mplus_Power			0x1fff
-
-/* How to access the device?
- * On ARM, it'll be mmap'd directly with 32-bit wide accesses.
- * On PPC, it's mmap'd and 16-bit wide.
- * Others use readb/writeb
- */
-#if defined(__arm__)
-#define ReadDOC_(adr, reg)      ((unsigned char)(*(volatile __u32 *)(((unsigned long)adr)+((reg)<<2))))
-#define WriteDOC_(d, adr, reg)  do{ *(volatile __u32 *)(((unsigned long)adr)+((reg)<<2)) = (__u32)d; wmb();} while(0)
-#define DOC_IOREMAP_LEN 0x8000
-#elif defined(__ppc__)
-#define ReadDOC_(adr, reg)      ((unsigned char)(*(volatile __u16 *)(((unsigned long)adr)+((reg)<<1))))
-#define WriteDOC_(d, adr, reg)  do{ *(volatile __u16 *)(((unsigned long)adr)+((reg)<<1)) = (__u16)d; wmb();} while(0)
-#define DOC_IOREMAP_LEN 0x4000
-#else
-#define ReadDOC_(adr, reg)      readb((void __iomem *)(adr) + (reg))
-#define WriteDOC_(d, adr, reg)  writeb(d, (void __iomem *)(adr) + (reg))
-#define DOC_IOREMAP_LEN 0x2000
-
-#endif
-
-#if defined(__i386__) || defined(__x86_64__)
-#define USE_MEMCPY
-#endif
-
-/* These are provided to directly use the DoC_xxx defines */
-#define ReadDOC(adr, reg)      ReadDOC_(adr,DoC_##reg)
-#define WriteDOC(d, adr, reg)  WriteDOC_(d,adr,DoC_##reg)
-
-#define DOC_MODE_RESET 		0
-#define DOC_MODE_NORMAL 	1
-#define DOC_MODE_RESERVED1 	2
-#define DOC_MODE_RESERVED2 	3
-
-#define DOC_MODE_CLR_ERR 	0x80
-#define	DOC_MODE_RST_LAT	0x10
-#define	DOC_MODE_BDECT		0x08
-#define DOC_MODE_MDWREN 	0x04
-
-#define DOC_ChipID_Doc2k 	0x20
-#define DOC_ChipID_Doc2kTSOP 	0x21	/* internal number for MTD */
-#define DOC_ChipID_DocMil 	0x30
-#define DOC_ChipID_DocMilPlus32	0x40
-#define DOC_ChipID_DocMilPlus16	0x41
-
-#define CDSN_CTRL_FR_B 		0x80
-#define CDSN_CTRL_FR_B0		0x40
-#define CDSN_CTRL_FR_B1		0x80
-
-#define CDSN_CTRL_ECC_IO 	0x20
-#define CDSN_CTRL_FLASH_IO 	0x10
-#define CDSN_CTRL_WP 		0x08
-#define CDSN_CTRL_ALE 		0x04
-#define CDSN_CTRL_CLE 		0x02
-#define CDSN_CTRL_CE 		0x01
-
-#define DOC_ECC_RESET 		0
-#define DOC_ECC_ERROR 		0x80
-#define DOC_ECC_RW 		0x20
-#define DOC_ECC__EN 		0x08
-#define DOC_TOGGLE_BIT 		0x04
-#define DOC_ECC_RESV 		0x02
-#define DOC_ECC_IGNORE		0x01
-
-#define DOC_FLASH_CE		0x80
-#define DOC_FLASH_WP		0x40
-#define DOC_FLASH_BANK		0x02
-
-/* We have to also set the reserved bit 1 for enable */
-#define DOC_ECC_EN (DOC_ECC__EN | DOC_ECC_RESV)
-#define DOC_ECC_DIS (DOC_ECC_RESV)
-
-struct Nand {
-	char floor, chip;
-	unsigned long curadr;
-	unsigned char curmode;
-	/* Also some erase/write/pipeline info when we get that far */
-};
-
-#define MAX_FLOORS 4
-#define MAX_CHIPS 4
-
-#define MAX_FLOORS_MIL 1
-#define MAX_CHIPS_MIL 1
-
-#define MAX_FLOORS_MPLUS 2
-#define MAX_CHIPS_MPLUS 1
-
-#define ADDR_COLUMN 1
-#define ADDR_PAGE 2
-#define ADDR_COLUMN_PAGE 3
-
-struct DiskOnChip {
-	unsigned long physadr;
-	void __iomem *virtadr;
-	unsigned long totlen;
-	unsigned char ChipID; /* Type of DiskOnChip */
-	int ioreg;
-
-	unsigned long mfr; /* Flash IDs - only one type of flash per device */
-	unsigned long id;
-	int chipshift;
-	char page256;
-	char pageadrlen;
-	char interleave; /* Internal interleaving - Millennium Plus style */
-	unsigned long erasesize;
-
-	int curfloor;
-	int curchip;
-
-	int numchips;
-	struct Nand *chips;
-	struct mtd_info *nextdoc;
-	struct mutex lock;
-};
-
-int doc_decode_ecc(unsigned char sector[512], unsigned char ecc1[6]);
-
-#endif /* __MTD_DOC2000_H__ */
diff --git a/ANDROID_3.4.5/include/linux/mtd/flashchip.h b/ANDROID_3.4.5/include/linux/mtd/flashchip.h
deleted file mode 100644
index b63fa457..00000000
--- a/ANDROID_3.4.5/include/linux/mtd/flashchip.h
+++ /dev/null
@@ -1,112 +0,0 @@
-/*
- * Copyright © 2000      Red Hat UK Limited
- * Copyright © 2000-2010 David Woodhouse <dwmw2@infradead.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- *
- */
-
-#ifndef __MTD_FLASHCHIP_H__
-#define __MTD_FLASHCHIP_H__
-
-/* For spinlocks. sched.h includes spinlock.h from whichever directory it
- * happens to be in - so we don't have to care whether we're on 2.2, which
- * has asm/spinlock.h, or 2.4, which has linux/spinlock.h
- */
-#include <linux/sched.h>
-#include <linux/mutex.h>
-
-typedef enum {
-	FL_READY,
-	FL_STATUS,
-	FL_CFI_QUERY,
-	FL_JEDEC_QUERY,
-	FL_ERASING,
-	FL_ERASE_SUSPENDING,
-	FL_ERASE_SUSPENDED,
-	FL_WRITING,
-	FL_WRITING_TO_BUFFER,
-	FL_OTP_WRITE,
-	FL_WRITE_SUSPENDING,
-	FL_WRITE_SUSPENDED,
-	FL_PM_SUSPENDED,
-	FL_SYNCING,
-	FL_UNLOADING,
-	FL_LOCKING,
-	FL_UNLOCKING,
-	FL_POINT,
-	FL_XIP_WHILE_ERASING,
-	FL_XIP_WHILE_WRITING,
-	FL_SHUTDOWN,
-	/* These 2 come from nand_state_t, which has been unified here */
-	FL_READING,
-	FL_CACHEDPRG,
-	/* These 4 come from onenand_state_t, which has been unified here */
-	FL_RESETING,
-	FL_OTPING,
-	FL_PREPARING_ERASE,
-	FL_VERIFYING_ERASE,
-
-	FL_UNKNOWN
-} flstate_t;
-
-
-
-/* NOTE: confusingly, this can be used to refer to more than one chip at a time,
-   if they're interleaved.  This can even refer to individual partitions on
-   the same physical chip when present. */
-
-struct flchip {
-	unsigned long start; /* Offset within the map */
-	//	unsigned long len;
-	/* We omit len for now, because when we group them together
-	   we insist that they're all of the same size, and the chip size
-	   is held in the next level up. If we get more versatile later,
-	   it'll make it a damn sight harder to find which chip we want from
-	   a given offset, and we'll want to add the per-chip length field
-	   back in.
-	*/
-	int ref_point_counter;
-	flstate_t state;
-	flstate_t oldstate;
-
-	unsigned int write_suspended:1;
-	unsigned int erase_suspended:1;
-	unsigned long in_progress_block_addr;
-
-	struct mutex mutex;
-	wait_queue_head_t wq; /* Wait on here when we're waiting for the chip
-			     to be ready */
-	int word_write_time;
-	int buffer_write_time;
-	int erase_time;
-
-	int word_write_time_max;
-	int buffer_write_time_max;
-	int erase_time_max;
-
-	void *priv;
-};
-
-/* This is used to handle contention on write/erase operations
-   between partitions of the same physical chip. */
-struct flchip_shared {
-	struct mutex lock;
-	struct flchip *writing;
-	struct flchip *erasing;
-};
-
-
-#endif /* __MTD_FLASHCHIP_H__ */
diff --git a/ANDROID_3.4.5/include/linux/mtd/fsmc.h b/ANDROID_3.4.5/include/linux/mtd/fsmc.h
deleted file mode 100644
index b2002922..00000000
--- a/ANDROID_3.4.5/include/linux/mtd/fsmc.h
+++ /dev/null
@@ -1,176 +0,0 @@
-/*
- * incude/mtd/fsmc.h
- *
- * ST Microelectronics
- * Flexible Static Memory Controller (FSMC)
- * platform data interface and header file
- *
- * Copyright © 2010 ST Microelectronics
- * Vipin Kumar <vipin.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __MTD_FSMC_H
-#define __MTD_FSMC_H
-
-#include <linux/io.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-#include <linux/types.h>
-#include <linux/mtd/partitions.h>
-#include <asm/param.h>
-
-#define FSMC_NAND_BW8		1
-#define FSMC_NAND_BW16		2
-
-#define FSMC_MAX_NOR_BANKS	4
-#define FSMC_MAX_NAND_BANKS	4
-
-#define FSMC_FLASH_WIDTH8	1
-#define FSMC_FLASH_WIDTH16	2
-
-/* fsmc controller registers for NOR flash */
-#define CTRL			0x0
-	/* ctrl register definitions */
-	#define BANK_ENABLE		(1 << 0)
-	#define MUXED			(1 << 1)
-	#define NOR_DEV			(2 << 2)
-	#define WIDTH_8			(0 << 4)
-	#define WIDTH_16		(1 << 4)
-	#define RSTPWRDWN		(1 << 6)
-	#define WPROT			(1 << 7)
-	#define WRT_ENABLE		(1 << 12)
-	#define WAIT_ENB		(1 << 13)
-
-#define CTRL_TIM		0x4
-	/* ctrl_tim register definitions */
-
-#define FSMC_NOR_BANK_SZ	0x8
-#define FSMC_NOR_REG_SIZE	0x40
-
-#define FSMC_NOR_REG(base, bank, reg)		(base + \
-						FSMC_NOR_BANK_SZ * (bank) + \
-						reg)
-
-/* fsmc controller registers for NAND flash */
-#define PC			0x00
-	/* pc register definitions */
-	#define FSMC_RESET		(1 << 0)
-	#define FSMC_WAITON		(1 << 1)
-	#define FSMC_ENABLE		(1 << 2)
-	#define FSMC_DEVTYPE_NAND	(1 << 3)
-	#define FSMC_DEVWID_8		(0 << 4)
-	#define FSMC_DEVWID_16		(1 << 4)
-	#define FSMC_ECCEN		(1 << 6)
-	#define FSMC_ECCPLEN_512	(0 << 7)
-	#define FSMC_ECCPLEN_256	(1 << 7)
-	#define FSMC_TCLR_1		(1)
-	#define FSMC_TCLR_SHIFT		(9)
-	#define FSMC_TCLR_MASK		(0xF)
-	#define FSMC_TAR_1		(1)
-	#define FSMC_TAR_SHIFT		(13)
-	#define FSMC_TAR_MASK		(0xF)
-#define STS			0x04
-	/* sts register definitions */
-	#define FSMC_CODE_RDY		(1 << 15)
-#define COMM			0x08
-	/* comm register definitions */
-	#define FSMC_TSET_0		0
-	#define FSMC_TSET_SHIFT		0
-	#define FSMC_TSET_MASK		0xFF
-	#define FSMC_TWAIT_6		6
-	#define FSMC_TWAIT_SHIFT	8
-	#define FSMC_TWAIT_MASK		0xFF
-	#define FSMC_THOLD_4		4
-	#define FSMC_THOLD_SHIFT	16
-	#define FSMC_THOLD_MASK		0xFF
-	#define FSMC_THIZ_1		1
-	#define FSMC_THIZ_SHIFT		24
-	#define FSMC_THIZ_MASK		0xFF
-#define ATTRIB			0x0C
-#define IOATA			0x10
-#define ECC1			0x14
-#define ECC2			0x18
-#define ECC3			0x1C
-#define FSMC_NAND_BANK_SZ	0x20
-
-#define FSMC_NAND_REG(base, bank, reg)		(base + FSMC_NOR_REG_SIZE + \
-						(FSMC_NAND_BANK_SZ * (bank)) + \
-						reg)
-
-#define FSMC_BUSY_WAIT_TIMEOUT	(1 * HZ)
-
-/*
- * There are 13 bytes of ecc for every 512 byte block in FSMC version 8
- * and it has to be read consecutively and immediately after the 512
- * byte data block for hardware to generate the error bit offsets
- * Managing the ecc bytes in the following way is easier. This way is
- * similar to oobfree structure maintained already in u-boot nand driver
- */
-#define MAX_ECCPLACE_ENTRIES	32
-
-struct fsmc_nand_eccplace {
-	uint8_t offset;
-	uint8_t length;
-};
-
-struct fsmc_eccplace {
-	struct fsmc_nand_eccplace eccplace[MAX_ECCPLACE_ENTRIES];
-};
-
-struct fsmc_nand_timings {
-	uint8_t tclr;
-	uint8_t tar;
-	uint8_t thiz;
-	uint8_t thold;
-	uint8_t twait;
-	uint8_t tset;
-};
-
-enum access_mode {
-	USE_DMA_ACCESS = 1,
-	USE_WORD_ACCESS,
-};
-
-/**
- * fsmc_nand_platform_data - platform specific NAND controller config
- * @partitions: partition table for the platform, use a default fallback
- * if this is NULL
- * @nr_partitions: the number of partitions in the previous entry
- * @options: different options for the driver
- * @width: bus width
- * @bank: default bank
- * @select_bank: callback to select a certain bank, this is
- * platform-specific. If the controller only supports one bank
- * this may be set to NULL
- */
-struct fsmc_nand_platform_data {
-	struct fsmc_nand_timings *nand_timings;
-	struct mtd_partition	*partitions;
-	unsigned int		nr_partitions;
-	unsigned int		options;
-	unsigned int		width;
-	unsigned int		bank;
-
-	/* CLE, ALE offsets */
-	unsigned int		cle_off;
-	unsigned int		ale_off;
-	enum access_mode	mode;
-
-	void			(*select_bank)(uint32_t bank, uint32_t busw);
-
-	/* priv structures for dma accesses */
-	void			*read_dma_priv;
-	void			*write_dma_priv;
-};
-
-extern int __init fsmc_nor_init(struct platform_device *pdev,
-		unsigned long base, uint32_t bank, uint32_t width);
-extern void __init fsmc_init_board_info(struct platform_device *pdev,
-		struct mtd_partition *partitions, unsigned int nr_partitions,
-		unsigned int width);
-
-#endif /* __MTD_FSMC_H */
diff --git a/ANDROID_3.4.5/include/linux/mtd/ftl.h b/ANDROID_3.4.5/include/linux/mtd/ftl.h
deleted file mode 100644
index 0555f7a0..00000000
--- a/ANDROID_3.4.5/include/linux/mtd/ftl.h
+++ /dev/null
@@ -1,74 +0,0 @@
-/*
- * Derived from (and probably identical to):
- * ftl.h 1.7 1999/10/25 20:23:17
- *
- * The contents of this file are subject to the Mozilla Public License
- * Version 1.1 (the "License"); you may not use this file except in
- * compliance with the License. You may obtain a copy of the License
- * at http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS IS"
- * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
- * the License for the specific language governing rights and
- * limitations under the License.
- *
- * The initial developer of the original code is David A. Hinds
- * <dahinds@users.sourceforge.net>.  Portions created by David A. Hinds
- * are Copyright (C) 1999 David A. Hinds.  All Rights Reserved.
- *
- * Alternatively, the contents of this file may be used under the
- * terms of the GNU General Public License version 2 (the "GPL"), in
- * which case the provisions of the GPL are applicable instead of the
- * above.  If you wish to allow the use of your version of this file
- * only under the terms of the GPL and not to allow others to use
- * your version of this file under the MPL, indicate your decision by
- * deleting the provisions above and replace them with the notice and
- * other provisions required by the GPL.  If you do not delete the
- * provisions above, a recipient may use your version of this file
- * under either the MPL or the GPL.
- */
-
-#ifndef _LINUX_FTL_H
-#define _LINUX_FTL_H
-
-typedef struct erase_unit_header_t {
-    uint8_t	LinkTargetTuple[5];
-    uint8_t	DataOrgTuple[10];
-    uint8_t	NumTransferUnits;
-    uint32_t	EraseCount;
-    uint16_t	LogicalEUN;
-    uint8_t	BlockSize;
-    uint8_t	EraseUnitSize;
-    uint16_t	FirstPhysicalEUN;
-    uint16_t	NumEraseUnits;
-    uint32_t	FormattedSize;
-    uint32_t	FirstVMAddress;
-    uint16_t	NumVMPages;
-    uint8_t	Flags;
-    uint8_t	Code;
-    uint32_t	SerialNumber;
-    uint32_t	AltEUHOffset;
-    uint32_t	BAMOffset;
-    uint8_t	Reserved[12];
-    uint8_t	EndTuple[2];
-} erase_unit_header_t;
-
-/* Flags in erase_unit_header_t */
-#define HIDDEN_AREA		0x01
-#define REVERSE_POLARITY	0x02
-#define DOUBLE_BAI		0x04
-
-/* Definitions for block allocation information */
-
-#define BLOCK_FREE(b)		((b) == 0xffffffff)
-#define BLOCK_DELETED(b)	(((b) == 0) || ((b) == 0xfffffffe))
-
-#define BLOCK_TYPE(b)		((b) & 0x7f)
-#define BLOCK_ADDRESS(b)	((b) & ~0x7f)
-#define BLOCK_NUMBER(b)		((b) >> 9)
-#define BLOCK_CONTROL		0x30
-#define BLOCK_DATA		0x40
-#define BLOCK_REPLACEMENT	0x60
-#define BLOCK_BAD		0x70
-
-#endif /* _LINUX_FTL_H */
diff --git a/ANDROID_3.4.5/include/linux/mtd/gen_probe.h b/ANDROID_3.4.5/include/linux/mtd/gen_probe.h
deleted file mode 100644
index 2c456054..00000000
--- a/ANDROID_3.4.5/include/linux/mtd/gen_probe.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * Copyright © 2001      Red Hat UK Limited
- * Copyright © 2001-2010 David Woodhouse <dwmw2@infradead.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- *
- */
-
-#ifndef __LINUX_MTD_GEN_PROBE_H__
-#define __LINUX_MTD_GEN_PROBE_H__
-
-#include <linux/mtd/flashchip.h>
-#include <linux/mtd/map.h>
-#include <linux/mtd/cfi.h>
-#include <linux/bitops.h>
-
-struct chip_probe {
-	char *name;
-	int (*probe_chip)(struct map_info *map, __u32 base,
-			  unsigned long *chip_map, struct cfi_private *cfi);
-};
-
-struct mtd_info *mtd_do_chip_probe(struct map_info *map, struct chip_probe *cp);
-
-#endif /* __LINUX_MTD_GEN_PROBE_H__ */
diff --git a/ANDROID_3.4.5/include/linux/mtd/gpmi-nand.h b/ANDROID_3.4.5/include/linux/mtd/gpmi-nand.h
deleted file mode 100644
index 69b6dbf4..00000000
--- a/ANDROID_3.4.5/include/linux/mtd/gpmi-nand.h
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#ifndef __MACH_MXS_GPMI_NAND_H__
-#define __MACH_MXS_GPMI_NAND_H__
-
-/* The size of the resources is fixed. */
-#define GPMI_NAND_RES_SIZE	6
-
-/* Resource names for the GPMI NAND driver. */
-#define GPMI_NAND_GPMI_REGS_ADDR_RES_NAME  "GPMI NAND GPMI Registers"
-#define GPMI_NAND_GPMI_INTERRUPT_RES_NAME  "GPMI NAND GPMI Interrupt"
-#define GPMI_NAND_BCH_REGS_ADDR_RES_NAME   "GPMI NAND BCH Registers"
-#define GPMI_NAND_BCH_INTERRUPT_RES_NAME   "GPMI NAND BCH Interrupt"
-#define GPMI_NAND_DMA_CHANNELS_RES_NAME    "GPMI NAND DMA Channels"
-#define GPMI_NAND_DMA_INTERRUPT_RES_NAME   "GPMI NAND DMA Interrupt"
-
-/**
- * struct gpmi_nand_platform_data - GPMI NAND driver platform data.
- *
- * This structure communicates platform-specific information to the GPMI NAND
- * driver that can't be expressed as resources.
- *
- * @platform_init:           A pointer to a function the driver will call to
- *                           initialize the platform (e.g., set up the pin mux).
- * @min_prop_delay_in_ns:    Minimum propagation delay of GPMI signals to and
- *                           from the NAND Flash device, in nanoseconds.
- * @max_prop_delay_in_ns:    Maximum propagation delay of GPMI signals to and
- *                           from the NAND Flash device, in nanoseconds.
- * @max_chip_count:          The maximum number of chips for which the driver
- *                           should configure the hardware. This value most
- *                           likely reflects the number of pins that are
- *                           connected to a NAND Flash device. If this is
- *                           greater than the SoC hardware can support, the
- *                           driver will print a message and fail to initialize.
- * @partitions:              An optional pointer to an array of partition
- *                           descriptions.
- * @partition_count:         The number of elements in the partitions array.
- */
-struct gpmi_nand_platform_data {
-	/* SoC hardware information. */
-	int		(*platform_init)(void);
-
-	/* NAND Flash information. */
-	unsigned int	min_prop_delay_in_ns;
-	unsigned int	max_prop_delay_in_ns;
-	unsigned int	max_chip_count;
-
-	/* Medium information. */
-	struct		mtd_partition *partitions;
-	unsigned	partition_count;
-};
-#endif
diff --git a/ANDROID_3.4.5/include/linux/mtd/inftl.h b/ANDROID_3.4.5/include/linux/mtd/inftl.h
deleted file mode 100644
index 02cd5f9b..00000000
--- a/ANDROID_3.4.5/include/linux/mtd/inftl.h
+++ /dev/null
@@ -1,63 +0,0 @@
-/*
- *	inftl.h -- defines to support the Inverse NAND Flash Translation Layer
- *
- *	(C) Copyright 2002, Greg Ungerer (gerg@snapgear.com)
- */
-
-#ifndef __MTD_INFTL_H__
-#define __MTD_INFTL_H__
-
-#ifndef __KERNEL__
-#error This is a kernel header. Perhaps include nftl-user.h instead?
-#endif
-
-#include <linux/mtd/blktrans.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/nftl.h>
-
-#include <mtd/inftl-user.h>
-
-#ifndef INFTL_MAJOR
-#define INFTL_MAJOR 96
-#endif
-#define INFTL_PARTN_BITS 4
-
-#ifdef __KERNEL__
-
-struct INFTLrecord {
-	struct mtd_blktrans_dev mbd;
-	__u16 MediaUnit;
-	__u32 EraseSize;
-	struct INFTLMediaHeader MediaHdr;
-	int usecount;
-	unsigned char heads;
-	unsigned char sectors;
-	unsigned short cylinders;
-	__u16 numvunits;
-	__u16 firstEUN;
-	__u16 lastEUN;
-	__u16 numfreeEUNs;
-	__u16 LastFreeEUN;		/* To speed up finding a free EUN */
-	int head,sect,cyl;
-	__u16 *PUtable;			/* Physical Unit Table */
-	__u16 *VUtable;			/* Virtual Unit Table */
-	unsigned int nb_blocks;		/* number of physical blocks */
-	unsigned int nb_boot_blocks;	/* number of blocks used by the bios */
-	struct erase_info instr;
-	struct nand_ecclayout oobinfo;
-};
-
-int INFTL_mount(struct INFTLrecord *s);
-int INFTL_formatblock(struct INFTLrecord *s, int block);
-
-void INFTL_dumptables(struct INFTLrecord *s);
-void INFTL_dumpVUchains(struct INFTLrecord *s);
-
-int inftl_read_oob(struct mtd_info *mtd, loff_t offs, size_t len,
-		   size_t *retlen, uint8_t *buf);
-int inftl_write_oob(struct mtd_info *mtd, loff_t offs, size_t len,
-		    size_t *retlen, uint8_t *buf);
-
-#endif /* __KERNEL__ */
-
-#endif /* __MTD_INFTL_H__ */
diff --git a/ANDROID_3.4.5/include/linux/mtd/latch-addr-flash.h b/ANDROID_3.4.5/include/linux/mtd/latch-addr-flash.h
deleted file mode 100644
index e94b8e12..00000000
--- a/ANDROID_3.4.5/include/linux/mtd/latch-addr-flash.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * Interface for NOR flash driver whose high address lines are latched
- *
- * Copyright © 2008 MontaVista Software, Inc. <source@mvista.com>
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-#ifndef __LATCH_ADDR_FLASH__
-#define __LATCH_ADDR_FLASH__
-
-struct map_info;
-struct mtd_partition;
-
-struct latch_addr_flash_data {
-	unsigned int		width;
-	unsigned int		size;
-
-	int			(*init)(void *data, int cs);
-	void			(*done)(void *data);
-	void			(*set_window)(unsigned long offset, void *data);
-	void			*data;
-
-	unsigned int		nr_parts;
-	struct mtd_partition	*parts;
-};
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/mtd/map.h b/ANDROID_3.4.5/include/linux/mtd/map.h
deleted file mode 100644
index 3595a023..00000000
--- a/ANDROID_3.4.5/include/linux/mtd/map.h
+++ /dev/null
@@ -1,465 +0,0 @@
-/*
- * Copyright © 2000-2010 David Woodhouse <dwmw2@infradead.org> et al.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- *
- */
-
-/* Overhauled routines for dealing with different mmap regions of flash */
-
-#ifndef __LINUX_MTD_MAP_H__
-#define __LINUX_MTD_MAP_H__
-
-#include <linux/types.h>
-#include <linux/list.h>
-#include <linux/string.h>
-#include <linux/bug.h>
-#include <linux/kernel.h>
-
-#include <asm/unaligned.h>
-#include <asm/io.h>
-#include <asm/barrier.h>
-
-#ifdef CONFIG_MTD_MAP_BANK_WIDTH_1
-#define map_bankwidth(map) 1
-#define map_bankwidth_is_1(map) (map_bankwidth(map) == 1)
-#define map_bankwidth_is_large(map) (0)
-#define map_words(map) (1)
-#define MAX_MAP_BANKWIDTH 1
-#else
-#define map_bankwidth_is_1(map) (0)
-#endif
-
-#ifdef CONFIG_MTD_MAP_BANK_WIDTH_2
-# ifdef map_bankwidth
-#  undef map_bankwidth
-#  define map_bankwidth(map) ((map)->bankwidth)
-# else
-#  define map_bankwidth(map) 2
-#  define map_bankwidth_is_large(map) (0)
-#  define map_words(map) (1)
-# endif
-#define map_bankwidth_is_2(map) (map_bankwidth(map) == 2)
-#undef MAX_MAP_BANKWIDTH
-#define MAX_MAP_BANKWIDTH 2
-#else
-#define map_bankwidth_is_2(map) (0)
-#endif
-
-#ifdef CONFIG_MTD_MAP_BANK_WIDTH_4
-# ifdef map_bankwidth
-#  undef map_bankwidth
-#  define map_bankwidth(map) ((map)->bankwidth)
-# else
-#  define map_bankwidth(map) 4
-#  define map_bankwidth_is_large(map) (0)
-#  define map_words(map) (1)
-# endif
-#define map_bankwidth_is_4(map) (map_bankwidth(map) == 4)
-#undef MAX_MAP_BANKWIDTH
-#define MAX_MAP_BANKWIDTH 4
-#else
-#define map_bankwidth_is_4(map) (0)
-#endif
-
-/* ensure we never evaluate anything shorted than an unsigned long
- * to zero, and ensure we'll never miss the end of an comparison (bjd) */
-
-#define map_calc_words(map) ((map_bankwidth(map) + (sizeof(unsigned long)-1))/ sizeof(unsigned long))
-
-#ifdef CONFIG_MTD_MAP_BANK_WIDTH_8
-# ifdef map_bankwidth
-#  undef map_bankwidth
-#  define map_bankwidth(map) ((map)->bankwidth)
-#  if BITS_PER_LONG < 64
-#   undef map_bankwidth_is_large
-#   define map_bankwidth_is_large(map) (map_bankwidth(map) > BITS_PER_LONG/8)
-#   undef map_words
-#   define map_words(map) map_calc_words(map)
-#  endif
-# else
-#  define map_bankwidth(map) 8
-#  define map_bankwidth_is_large(map) (BITS_PER_LONG < 64)
-#  define map_words(map) map_calc_words(map)
-# endif
-#define map_bankwidth_is_8(map) (map_bankwidth(map) == 8)
-#undef MAX_MAP_BANKWIDTH
-#define MAX_MAP_BANKWIDTH 8
-#else
-#define map_bankwidth_is_8(map) (0)
-#endif
-
-#ifdef CONFIG_MTD_MAP_BANK_WIDTH_16
-# ifdef map_bankwidth
-#  undef map_bankwidth
-#  define map_bankwidth(map) ((map)->bankwidth)
-#  undef map_bankwidth_is_large
-#  define map_bankwidth_is_large(map) (map_bankwidth(map) > BITS_PER_LONG/8)
-#  undef map_words
-#  define map_words(map) map_calc_words(map)
-# else
-#  define map_bankwidth(map) 16
-#  define map_bankwidth_is_large(map) (1)
-#  define map_words(map) map_calc_words(map)
-# endif
-#define map_bankwidth_is_16(map) (map_bankwidth(map) == 16)
-#undef MAX_MAP_BANKWIDTH
-#define MAX_MAP_BANKWIDTH 16
-#else
-#define map_bankwidth_is_16(map) (0)
-#endif
-
-#ifdef CONFIG_MTD_MAP_BANK_WIDTH_32
-# ifdef map_bankwidth
-#  undef map_bankwidth
-#  define map_bankwidth(map) ((map)->bankwidth)
-#  undef map_bankwidth_is_large
-#  define map_bankwidth_is_large(map) (map_bankwidth(map) > BITS_PER_LONG/8)
-#  undef map_words
-#  define map_words(map) map_calc_words(map)
-# else
-#  define map_bankwidth(map) 32
-#  define map_bankwidth_is_large(map) (1)
-#  define map_words(map) map_calc_words(map)
-# endif
-#define map_bankwidth_is_32(map) (map_bankwidth(map) == 32)
-#undef MAX_MAP_BANKWIDTH
-#define MAX_MAP_BANKWIDTH 32
-#else
-#define map_bankwidth_is_32(map) (0)
-#endif
-
-#ifndef map_bankwidth
-#warning "No CONFIG_MTD_MAP_BANK_WIDTH_xx selected. No NOR chip support can work"
-static inline int map_bankwidth(void *map)
-{
-	BUG();
-	return 0;
-}
-#define map_bankwidth_is_large(map) (0)
-#define map_words(map) (0)
-#define MAX_MAP_BANKWIDTH 1
-#endif
-
-static inline int map_bankwidth_supported(int w)
-{
-	switch (w) {
-#ifdef CONFIG_MTD_MAP_BANK_WIDTH_1
-	case 1:
-#endif
-#ifdef CONFIG_MTD_MAP_BANK_WIDTH_2
-	case 2:
-#endif
-#ifdef CONFIG_MTD_MAP_BANK_WIDTH_4
-	case 4:
-#endif
-#ifdef CONFIG_MTD_MAP_BANK_WIDTH_8
-	case 8:
-#endif
-#ifdef CONFIG_MTD_MAP_BANK_WIDTH_16
-	case 16:
-#endif
-#ifdef CONFIG_MTD_MAP_BANK_WIDTH_32
-	case 32:
-#endif
-		return 1;
-
-	default:
-		return 0;
-	}
-}
-
-#define MAX_MAP_LONGS ( ((MAX_MAP_BANKWIDTH*8) + BITS_PER_LONG - 1) / BITS_PER_LONG )
-
-typedef union {
-	unsigned long x[MAX_MAP_LONGS];
-} map_word;
-
-/* The map stuff is very simple. You fill in your struct map_info with
-   a handful of routines for accessing the device, making sure they handle
-   paging etc. correctly if your device needs it. Then you pass it off
-   to a chip probe routine -- either JEDEC or CFI probe or both -- via
-   do_map_probe(). If a chip is recognised, the probe code will invoke the
-   appropriate chip driver (if present) and return a struct mtd_info.
-   At which point, you fill in the mtd->module with your own module
-   address, and register it with the MTD core code. Or you could partition
-   it and register the partitions instead, or keep it for your own private
-   use; whatever.
-
-   The mtd->priv field will point to the struct map_info, and any further
-   private data required by the chip driver is linked from the
-   mtd->priv->fldrv_priv field. This allows the map driver to get at
-   the destructor function map->fldrv_destroy() when it's tired
-   of living.
-*/
-
-struct map_info {
-	const char *name;
-	unsigned long size;
-	resource_size_t phys;
-#define NO_XIP (-1UL)
-
-	void __iomem *virt;
-	void *cached;
-
-	int swap; /* this mapping's byte-swapping requirement */
-	int bankwidth; /* in octets. This isn't necessarily the width
-		       of actual bus cycles -- it's the repeat interval
-		      in bytes, before you are talking to the first chip again.
-		      */
-
-#ifdef CONFIG_MTD_COMPLEX_MAPPINGS
-	map_word (*read)(struct map_info *, unsigned long);
-	void (*copy_from)(struct map_info *, void *, unsigned long, ssize_t);
-
-	void (*write)(struct map_info *, const map_word, unsigned long);
-	void (*copy_to)(struct map_info *, unsigned long, const void *, ssize_t);
-
-	/* We can perhaps put in 'point' and 'unpoint' methods, if we really
-	   want to enable XIP for non-linear mappings. Not yet though. */
-#endif
-	/* It's possible for the map driver to use cached memory in its
-	   copy_from implementation (and _only_ with copy_from).  However,
-	   when the chip driver knows some flash area has changed contents,
-	   it will signal it to the map driver through this routine to let
-	   the map driver invalidate the corresponding cache as needed.
-	   If there is no cache to care about this can be set to NULL. */
-	void (*inval_cache)(struct map_info *, unsigned long, ssize_t);
-
-	/* set_vpp() must handle being reentered -- enable, enable, disable
-	   must leave it enabled. */
-	void (*set_vpp)(struct map_info *, int);
-
-	unsigned long pfow_base;
-	unsigned long map_priv_1;
-	unsigned long map_priv_2;
-	void *fldrv_priv;
-	struct mtd_chip_driver *fldrv;
-};
-
-struct mtd_chip_driver {
-	struct mtd_info *(*probe)(struct map_info *map);
-	void (*destroy)(struct mtd_info *);
-	struct module *module;
-	char *name;
-	struct list_head list;
-};
-
-void register_mtd_chip_driver(struct mtd_chip_driver *);
-void unregister_mtd_chip_driver(struct mtd_chip_driver *);
-
-struct mtd_info *do_map_probe(const char *name, struct map_info *map);
-void map_destroy(struct mtd_info *mtd);
-
-#define ENABLE_VPP(map) do { if(map->set_vpp) map->set_vpp(map, 1); } while(0)
-#define DISABLE_VPP(map) do { if(map->set_vpp) map->set_vpp(map, 0); } while(0)
-
-#define INVALIDATE_CACHED_RANGE(map, from, size) \
-	do { if(map->inval_cache) map->inval_cache(map, from, size); } while(0)
-
-
-static inline int map_word_equal(struct map_info *map, map_word val1, map_word val2)
-{
-	int i;
-	for (i=0; i<map_words(map); i++) {
-		if (val1.x[i] != val2.x[i])
-			return 0;
-	}
-	return 1;
-}
-
-static inline map_word map_word_and(struct map_info *map, map_word val1, map_word val2)
-{
-	map_word r;
-	int i;
-
-	for (i=0; i<map_words(map); i++) {
-		r.x[i] = val1.x[i] & val2.x[i];
-	}
-	return r;
-}
-
-static inline map_word map_word_clr(struct map_info *map, map_word val1, map_word val2)
-{
-	map_word r;
-	int i;
-
-	for (i=0; i<map_words(map); i++) {
-		r.x[i] = val1.x[i] & ~val2.x[i];
-	}
-	return r;
-}
-
-static inline map_word map_word_or(struct map_info *map, map_word val1, map_word val2)
-{
-	map_word r;
-	int i;
-
-	for (i=0; i<map_words(map); i++) {
-		r.x[i] = val1.x[i] | val2.x[i];
-	}
-	return r;
-}
-
-#define map_word_andequal(m, a, b, z) map_word_equal(m, z, map_word_and(m, a, b))
-
-static inline int map_word_bitsset(struct map_info *map, map_word val1, map_word val2)
-{
-	int i;
-
-	for (i=0; i<map_words(map); i++) {
-		if (val1.x[i] & val2.x[i])
-			return 1;
-	}
-	return 0;
-}
-
-static inline map_word map_word_load(struct map_info *map, const void *ptr)
-{
-	map_word r;
-
-	if (map_bankwidth_is_1(map))
-		r.x[0] = *(unsigned char *)ptr;
-	else if (map_bankwidth_is_2(map))
-		r.x[0] = get_unaligned((uint16_t *)ptr);
-	else if (map_bankwidth_is_4(map))
-		r.x[0] = get_unaligned((uint32_t *)ptr);
-#if BITS_PER_LONG >= 64
-	else if (map_bankwidth_is_8(map))
-		r.x[0] = get_unaligned((uint64_t *)ptr);
-#endif
-	else if (map_bankwidth_is_large(map))
-		memcpy(r.x, ptr, map->bankwidth);
-
-	return r;
-}
-
-static inline map_word map_word_load_partial(struct map_info *map, map_word orig, const unsigned char *buf, int start, int len)
-{
-	int i;
-
-	if (map_bankwidth_is_large(map)) {
-		char *dest = (char *)&orig;
-		memcpy(dest+start, buf, len);
-	} else {
-		for (i=start; i < start+len; i++) {
-			int bitpos;
-#ifdef __LITTLE_ENDIAN
-			bitpos = i*8;
-#else /* __BIG_ENDIAN */
-			bitpos = (map_bankwidth(map)-1-i)*8;
-#endif
-			orig.x[0] &= ~(0xff << bitpos);
-			orig.x[0] |= buf[i-start] << bitpos;
-		}
-	}
-	return orig;
-}
-
-#if BITS_PER_LONG < 64
-#define MAP_FF_LIMIT 4
-#else
-#define MAP_FF_LIMIT 8
-#endif
-
-static inline map_word map_word_ff(struct map_info *map)
-{
-	map_word r;
-	int i;
-
-	if (map_bankwidth(map) < MAP_FF_LIMIT) {
-		int bw = 8 * map_bankwidth(map);
-		r.x[0] = (1 << bw) - 1;
-	} else {
-		for (i=0; i<map_words(map); i++)
-			r.x[i] = ~0UL;
-	}
-	return r;
-}
-
-static inline map_word inline_map_read(struct map_info *map, unsigned long ofs)
-{
-	map_word r;
-
-	if (map_bankwidth_is_1(map))
-		r.x[0] = __raw_readb(map->virt + ofs);
-	else if (map_bankwidth_is_2(map))
-		r.x[0] = __raw_readw(map->virt + ofs);
-	else if (map_bankwidth_is_4(map))
-		r.x[0] = __raw_readl(map->virt + ofs);
-#if BITS_PER_LONG >= 64
-	else if (map_bankwidth_is_8(map))
-		r.x[0] = __raw_readq(map->virt + ofs);
-#endif
-	else if (map_bankwidth_is_large(map))
-		memcpy_fromio(r.x, map->virt+ofs, map->bankwidth);
-	else
-		BUG();
-
-	return r;
-}
-
-static inline void inline_map_write(struct map_info *map, const map_word datum, unsigned long ofs)
-{
-	if (map_bankwidth_is_1(map))
-		__raw_writeb(datum.x[0], map->virt + ofs);
-	else if (map_bankwidth_is_2(map))
-		__raw_writew(datum.x[0], map->virt + ofs);
-	else if (map_bankwidth_is_4(map))
-		__raw_writel(datum.x[0], map->virt + ofs);
-#if BITS_PER_LONG >= 64
-	else if (map_bankwidth_is_8(map))
-		__raw_writeq(datum.x[0], map->virt + ofs);
-#endif
-	else if (map_bankwidth_is_large(map))
-		memcpy_toio(map->virt+ofs, datum.x, map->bankwidth);
-	mb();
-}
-
-static inline void inline_map_copy_from(struct map_info *map, void *to, unsigned long from, ssize_t len)
-{
-	if (map->cached)
-		memcpy(to, (char *)map->cached + from, len);
-	else
-		memcpy_fromio(to, map->virt + from, len);
-}
-
-static inline void inline_map_copy_to(struct map_info *map, unsigned long to, const void *from, ssize_t len)
-{
-	memcpy_toio(map->virt + to, from, len);
-}
-
-#ifdef CONFIG_MTD_COMPLEX_MAPPINGS
-#define map_read(map, ofs) (map)->read(map, ofs)
-#define map_copy_from(map, to, from, len) (map)->copy_from(map, to, from, len)
-#define map_write(map, datum, ofs) (map)->write(map, datum, ofs)
-#define map_copy_to(map, to, from, len) (map)->copy_to(map, to, from, len)
-
-extern void simple_map_init(struct map_info *);
-#define map_is_linear(map) (map->phys != NO_XIP)
-
-#else
-#define map_read(map, ofs) inline_map_read(map, ofs)
-#define map_copy_from(map, to, from, len) inline_map_copy_from(map, to, from, len)
-#define map_write(map, datum, ofs) inline_map_write(map, datum, ofs)
-#define map_copy_to(map, to, from, len) inline_map_copy_to(map, to, from, len)
-
-
-#define simple_map_init(map) BUG_ON(!map_bankwidth_supported((map)->bankwidth))
-#define map_is_linear(map) ({ (void)(map); 1; })
-
-#endif /* !CONFIG_MTD_COMPLEX_MAPPINGS */
-
-#endif /* __LINUX_MTD_MAP_H__ */
diff --git a/ANDROID_3.4.5/include/linux/mtd/mtd.h b/ANDROID_3.4.5/include/linux/mtd/mtd.h
deleted file mode 100644
index 80affde5..00000000
--- a/ANDROID_3.4.5/include/linux/mtd/mtd.h
+++ /dev/null
@@ -1,429 +0,0 @@
-/*
- * Copyright © 1999-2010 David Woodhouse <dwmw2@infradead.org> et al.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- *
- */
-
-#ifndef __MTD_MTD_H__
-#define __MTD_MTD_H__
-
-#include <linux/types.h>
-#include <linux/uio.h>
-#include <linux/notifier.h>
-#include <linux/device.h>
-
-#include <mtd/mtd-abi.h>
-
-#include <asm/div64.h>
-
-#define MTD_CHAR_MAJOR 90
-#define MTD_BLOCK_MAJOR 31
-#define MAX_MTD_DEVICES 32
-
-#define MTD_ERASE_PENDING	0x01
-#define MTD_ERASING		0x02
-#define MTD_ERASE_SUSPEND	0x04
-#define MTD_ERASE_DONE		0x08
-#define MTD_ERASE_FAILED	0x10
-
-#define MTD_FAIL_ADDR_UNKNOWN -1LL
-
-/*
- * If the erase fails, fail_addr might indicate exactly which block failed. If
- * fail_addr = MTD_FAIL_ADDR_UNKNOWN, the failure was not at the device level
- * or was not specific to any particular block.
- */
-struct erase_info {
-	struct mtd_info *mtd;
-	uint64_t addr;
-	uint64_t len;
-	uint64_t fail_addr;
-	u_long time;
-	u_long retries;
-	unsigned dev;
-	unsigned cell;
-	void (*callback) (struct erase_info *self);
-	u_long priv;
-	u_char state;
-	struct erase_info *next;
-};
-
-struct mtd_erase_region_info {
-	uint64_t offset;		/* At which this region starts, from the beginning of the MTD */
-	uint32_t erasesize;		/* For this region */
-	uint32_t numblocks;		/* Number of blocks of erasesize in this region */
-	unsigned long *lockmap;		/* If keeping bitmap of locks */
-};
-
-/**
- * struct mtd_oob_ops - oob operation operands
- * @mode:	operation mode
- *
- * @len:	number of data bytes to write/read
- *
- * @retlen:	number of data bytes written/read
- *
- * @ooblen:	number of oob bytes to write/read
- * @oobretlen:	number of oob bytes written/read
- * @ooboffs:	offset of oob data in the oob area (only relevant when
- *		mode = MTD_OPS_PLACE_OOB or MTD_OPS_RAW)
- * @datbuf:	data buffer - if NULL only oob data are read/written
- * @oobbuf:	oob data buffer
- *
- * Note, it is allowed to read more than one OOB area at one go, but not write.
- * The interface assumes that the OOB write requests program only one page's
- * OOB area.
- */
-struct mtd_oob_ops {
-	unsigned int	mode;
-	size_t		len;
-	size_t		retlen;
-	size_t		ooblen;
-	size_t		oobretlen;
-	uint32_t	ooboffs;
-	uint8_t		*datbuf;
-	uint8_t		*oobbuf;
-};
-
-#define MTD_MAX_OOBFREE_ENTRIES_LARGE	32
-#define MTD_MAX_ECCPOS_ENTRIES_LARGE	448
-/*
- * Internal ECC layout control structure. For historical reasons, there is a
- * similar, smaller struct nand_ecclayout_user (in mtd-abi.h) that is retained
- * for export to user-space via the ECCGETLAYOUT ioctl.
- * nand_ecclayout should be expandable in the future simply by the above macros.
- */
-struct nand_ecclayout {
-	__u32 eccbytes;
-	__u32 eccpos[MTD_MAX_ECCPOS_ENTRIES_LARGE];
-	__u32 oobavail;
-	struct nand_oobfree oobfree[MTD_MAX_OOBFREE_ENTRIES_LARGE];
-};
-
-struct module;	/* only needed for owner field in mtd_info */
-
-struct mtd_info {
-	u_char type;
-	uint32_t flags;
-	uint64_t size;	 // Total size of the MTD
-
-	/* "Major" erase size for the device. Naïve users may take this
-	 * to be the only erase size available, or may use the more detailed
-	 * information below if they desire
-	 */
-	uint32_t erasesize;
-	/* Minimal writable flash unit size. In case of NOR flash it is 1 (even
-	 * though individual bits can be cleared), in case of NAND flash it is
-	 * one NAND page (or half, or one-fourths of it), in case of ECC-ed NOR
-	 * it is of ECC block size, etc. It is illegal to have writesize = 0.
-	 * Any driver registering a struct mtd_info must ensure a writesize of
-	 * 1 or larger.
-	 */
-	uint32_t writesize;
-
-	/*
-	 * Size of the write buffer used by the MTD. MTD devices having a write
-	 * buffer can write multiple writesize chunks at a time. E.g. while
-	 * writing 4 * writesize bytes to a device with 2 * writesize bytes
-	 * buffer the MTD driver can (but doesn't have to) do 2 writesize
-	 * operations, but not 4. Currently, all NANDs have writebufsize
-	 * equivalent to writesize (NAND page size). Some NOR flashes do have
-	 * writebufsize greater than writesize.
-	 */
-	uint32_t writebufsize;
-
-	uint32_t oobsize;   // Amount of OOB data per block (e.g. 16)
-	uint32_t oobavail;  // Available OOB bytes per block
-	
-	uint32_t realerasesize;	//dan_multi add for multi plane access
-	uint32_t realwritesize;
-	uint32_t realoobsize;
-	int planenum;
-
-	/*
-	 * If erasesize is a power of 2 then the shift is stored in
-	 * erasesize_shift otherwise erasesize_shift is zero. Ditto writesize.
-	 */
-	unsigned int erasesize_shift;
-	unsigned int writesize_shift;
-	/* Masks based on erasesize_shift and writesize_shift */
-	unsigned int erasesize_mask;
-	unsigned int writesize_mask;
-
-	// Kernel-only stuff starts here.
-	const char *name;
-	int index;
-
-	/* ECC layout structure pointer - read only! */
-	struct nand_ecclayout *ecclayout;
-
-	/* max number of correctible bit errors per writesize */
-	unsigned int ecc_strength;
-
-	/* Data for variable erase regions. If numeraseregions is zero,
-	 * it means that the whole device has erasesize as given above.
-	 */
-	int numeraseregions;
-	struct mtd_erase_region_info *eraseregions;
-
-	/*
-	 * Do not call via these pointers, use corresponding mtd_*()
-	 * wrappers instead.
-	 */
-	int (*_erase) (struct mtd_info *mtd, struct erase_info *instr);
-	int (*_point) (struct mtd_info *mtd, loff_t from, size_t len,
-		       size_t *retlen, void **virt, resource_size_t *phys);
-	int (*_unpoint) (struct mtd_info *mtd, loff_t from, size_t len);
-	unsigned long (*_get_unmapped_area) (struct mtd_info *mtd,
-					     unsigned long len,
-					     unsigned long offset,
-					     unsigned long flags);
-	int (*_read) (struct mtd_info *mtd, loff_t from, size_t len,
-		      size_t *retlen, u_char *buf);
-	int (*_write) (struct mtd_info *mtd, loff_t to, size_t len,
-		       size_t *retlen, const u_char *buf);
-	int (*_panic_write) (struct mtd_info *mtd, loff_t to, size_t len,
-			     size_t *retlen, const u_char *buf);
-	int (*_read_oob) (struct mtd_info *mtd, loff_t from,
-			  struct mtd_oob_ops *ops);
-	int (*read_bbinfo_facmk) (struct mtd_info *mtd, loff_t from,
-                         struct mtd_oob_ops *ops); //Vincent 20090526
-	int (*_write_oob) (struct mtd_info *mtd, loff_t to,
-			   struct mtd_oob_ops *ops);
-	int (*_get_fact_prot_info) (struct mtd_info *mtd, struct otp_info *buf,
-				    size_t len);
-	int (*get_para) (struct mtd_info *mtd, int chip);
-	int (*_read_fact_prot_reg) (struct mtd_info *mtd, loff_t from,
-				    size_t len, size_t *retlen, u_char *buf);
-	int (*_get_user_prot_info) (struct mtd_info *mtd, struct otp_info *buf,
-				    size_t len);
-	int (*_read_user_prot_reg) (struct mtd_info *mtd, loff_t from,
-				    size_t len, size_t *retlen, u_char *buf);
-	int (*_write_user_prot_reg) (struct mtd_info *mtd, loff_t to,
-				     size_t len, size_t *retlen, u_char *buf);
-	int (*_lock_user_prot_reg) (struct mtd_info *mtd, loff_t from,
-				    size_t len);
-	int (*_writev) (struct mtd_info *mtd, const struct kvec *vecs,
-			unsigned long count, loff_t to, size_t *retlen);
-	void (*_sync) (struct mtd_info *mtd);
-	int (*_lock) (struct mtd_info *mtd, loff_t ofs, uint64_t len);
-	int (*_unlock) (struct mtd_info *mtd, loff_t ofs, uint64_t len);
-	int (*_is_locked) (struct mtd_info *mtd, loff_t ofs, uint64_t len);
-	int (*_block_isbad) (struct mtd_info *mtd, loff_t ofs);
-	int (*_block_markbad) (struct mtd_info *mtd, loff_t ofs);
-	int (*_suspend) (struct mtd_info *mtd);
-	void (*_resume) (struct mtd_info *mtd);
-	/*
-	 * If the driver is something smart, like UBI, it may need to maintain
-	 * its own reference counting. The below functions are only for driver.
-	 */
-	int (*_get_device) (struct mtd_info *mtd);
-	void (*_put_device) (struct mtd_info *mtd);
-
-	/* Backing device capabilities for this device
-	 * - provides mmap capabilities
-	 */
-	struct backing_dev_info *backing_dev_info;
-
-	struct notifier_block reboot_notifier;  /* default mode before reboot */
-
-	/* ECC status information */
-	struct mtd_ecc_stats ecc_stats;
-	/* Subpage shift (NAND) */
-	int subpage_sft;
-
-	void *priv;
-
-	struct module *owner;
-	struct device dev;
-	int usecount;
-	int blkcnt;
-	int pagecnt;
-	int dwECCBitNum;
-	int dwRetry;
-	int dwRdmz;
-	int dwDDR;
-	int id;
-	int id2;
-	unsigned int spec_clk;
-	int spec_tadl;
-	int bbt_sw_rdmz;
-	uint32_t pageSizek;
-	int ecc_err_cnt;
-	int ecc_err_level;
-};
-
-int mtd_erase(struct mtd_info *mtd, struct erase_info *instr);
-int mtd_point(struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen,
-	      void **virt, resource_size_t *phys);
-int mtd_unpoint(struct mtd_info *mtd, loff_t from, size_t len);
-unsigned long mtd_get_unmapped_area(struct mtd_info *mtd, unsigned long len,
-				    unsigned long offset, unsigned long flags);
-int mtd_read(struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen,
-	     u_char *buf);
-int mtd_write(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen,
-	      const u_char *buf);
-int mtd_panic_write(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen,
-		    const u_char *buf);
-
-static inline int mtd_read_oob(struct mtd_info *mtd, loff_t from,
-			       struct mtd_oob_ops *ops)
-{
-	ops->retlen = ops->oobretlen = 0;
-	if (!mtd->_read_oob)
-		return -EOPNOTSUPP;
-	return mtd->_read_oob(mtd, from, ops);
-}
-
-static inline int mtd_write_oob(struct mtd_info *mtd, loff_t to,
-				struct mtd_oob_ops *ops)
-{
-	ops->retlen = ops->oobretlen = 0;
-	if (!mtd->_write_oob)
-		return -EOPNOTSUPP;
-	if (!(mtd->flags & MTD_WRITEABLE))
-		return -EROFS;
-	return mtd->_write_oob(mtd, to, ops);
-}
-
-int mtd_get_fact_prot_info(struct mtd_info *mtd, struct otp_info *buf,
-			   size_t len);
-int mtd_read_fact_prot_reg(struct mtd_info *mtd, loff_t from, size_t len,
-			   size_t *retlen, u_char *buf);
-int mtd_get_user_prot_info(struct mtd_info *mtd, struct otp_info *buf,
-			   size_t len);
-int mtd_read_user_prot_reg(struct mtd_info *mtd, loff_t from, size_t len,
-			   size_t *retlen, u_char *buf);
-int mtd_write_user_prot_reg(struct mtd_info *mtd, loff_t to, size_t len,
-			    size_t *retlen, u_char *buf);
-int mtd_lock_user_prot_reg(struct mtd_info *mtd, loff_t from, size_t len);
-
-int mtd_writev(struct mtd_info *mtd, const struct kvec *vecs,
-	       unsigned long count, loff_t to, size_t *retlen);
-
-static inline void mtd_sync(struct mtd_info *mtd)
-{
-	if (mtd->_sync)
-		mtd->_sync(mtd);
-}
-
-int mtd_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len);
-int mtd_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len);
-int mtd_is_locked(struct mtd_info *mtd, loff_t ofs, uint64_t len);
-int mtd_block_isbad(struct mtd_info *mtd, loff_t ofs);
-int mtd_block_markbad(struct mtd_info *mtd, loff_t ofs);
-
-static inline int mtd_suspend(struct mtd_info *mtd)
-{
-	return mtd->_suspend ? mtd->_suspend(mtd) : 0;
-}
-
-static inline void mtd_resume(struct mtd_info *mtd)
-{
-	if (mtd->_resume)
-		mtd->_resume(mtd);
-}
-
-static inline uint32_t mtd_div_by_eb(uint64_t sz, struct mtd_info *mtd)
-{
-	if (mtd->erasesize_shift)
-		return sz >> mtd->erasesize_shift;
-	do_div(sz, mtd->erasesize);
-	return sz;
-}
-
-static inline uint32_t mtd_mod_by_eb(uint64_t sz, struct mtd_info *mtd)
-{
-	if (mtd->erasesize_shift)
-		return sz & mtd->erasesize_mask;
-	return do_div(sz, mtd->erasesize);
-}
-
-static inline uint32_t mtd_div_by_ws(uint64_t sz, struct mtd_info *mtd)
-{
-	if (mtd->writesize_shift)
-		return sz >> mtd->writesize_shift;
-	do_div(sz, mtd->writesize);
-	return sz;
-}
-
-static inline uint32_t mtd_mod_by_ws(uint64_t sz, struct mtd_info *mtd)
-{
-	if (mtd->writesize_shift)
-		return sz & mtd->writesize_mask;
-	return do_div(sz, mtd->writesize);
-}
-
-static inline int mtd_has_oob(const struct mtd_info *mtd)
-{
-	return mtd->_read_oob && mtd->_write_oob;
-}
-
-static inline int mtd_can_have_bb(const struct mtd_info *mtd)
-{
-	return !!mtd->_block_isbad;
-}
-
-	/* Kernel-side ioctl definitions */
-
-struct mtd_partition;
-struct mtd_part_parser_data;
-extern int add_mtd_device(struct mtd_info *mtd);
-extern int del_mtd_device (struct mtd_info *mtd);
-
-extern int mtd_device_parse_register(struct mtd_info *mtd,
-			      const char **part_probe_types,
-			      struct mtd_part_parser_data *parser_data,
-			      const struct mtd_partition *defparts,
-			      int defnr_parts);
-#define mtd_device_register(master, parts, nr_parts)	\
-	mtd_device_parse_register(master, NULL, NULL, parts, nr_parts)
-extern int mtd_device_unregister(struct mtd_info *master);
-extern struct mtd_info *get_mtd_device(struct mtd_info *mtd, int num);
-extern int __get_mtd_device(struct mtd_info *mtd);
-extern void __put_mtd_device(struct mtd_info *mtd);
-extern struct mtd_info *get_mtd_device_nm(const char *name);
-extern void put_mtd_device(struct mtd_info *mtd);
-typedef int (*SF_FPTR)(int l);
-extern SF_FPTR wmt_sf_prot;
-
-
-struct mtd_notifier {
-	void (*add)(struct mtd_info *mtd);
-	void (*remove)(struct mtd_info *mtd);
-	struct list_head list;
-};
-
-
-extern void register_mtd_user (struct mtd_notifier *new);
-extern int unregister_mtd_user (struct mtd_notifier *old);
-void *mtd_kmalloc_up_to(const struct mtd_info *mtd, size_t *size);
-
-void mtd_erase_callback(struct erase_info *instr);
-
-static inline int mtd_is_bitflip(int err) {
-	return err == -EUCLEAN;
-}
-
-static inline int mtd_is_eccerr(int err) {
-	return err == -EBADMSG;
-}
-
-static inline int mtd_is_bitflip_or_eccerr(int err) {
-	return mtd_is_bitflip(err) || mtd_is_eccerr(err);
-}
-
-#endif /* __MTD_MTD_H__ */
diff --git a/ANDROID_3.4.5/include/linux/mtd/mtdram.h b/ANDROID_3.4.5/include/linux/mtd/mtdram.h
deleted file mode 100644
index 68891313..00000000
--- a/ANDROID_3.4.5/include/linux/mtd/mtdram.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef __MTD_MTDRAM_H__
-#define __MTD_MTDRAM_H__
-
-#include <linux/mtd/mtd.h>
-int mtdram_init_device(struct mtd_info *mtd, void *mapped_address,
-			unsigned long size, char *name);
-
-#endif /* __MTD_MTDRAM_H__ */
diff --git a/ANDROID_3.4.5/include/linux/mtd/nand-gpio.h b/ANDROID_3.4.5/include/linux/mtd/nand-gpio.h
deleted file mode 100644
index 51534e50..00000000
--- a/ANDROID_3.4.5/include/linux/mtd/nand-gpio.h
+++ /dev/null
@@ -1,19 +0,0 @@
-#ifndef __LINUX_MTD_NAND_GPIO_H
-#define __LINUX_MTD_NAND_GPIO_H
-
-#include <linux/mtd/nand.h>
-
-struct gpio_nand_platdata {
-	int	gpio_nce;
-	int	gpio_nwp;
-	int	gpio_cle;
-	int	gpio_ale;
-	int	gpio_rdy;
-	void	(*adjust_parts)(struct gpio_nand_platdata *, size_t);
-	struct mtd_partition *parts;
-	unsigned int num_parts;
-	unsigned int options;
-	int	chip_delay;
-};
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/mtd/nand.h b/ANDROID_3.4.5/include/linux/mtd/nand.h
deleted file mode 100644
index 19eb23c1..00000000
--- a/ANDROID_3.4.5/include/linux/mtd/nand.h
+++ /dev/null
@@ -1,828 +0,0 @@
-/*
- *  linux/include/linux/mtd/nand.h
- *
- *  Copyright © 2000-2010 David Woodhouse <dwmw2@infradead.org>
- *                        Steven J. Hill <sjhill@realitydiluted.com>
- *		          Thomas Gleixner <tglx@linutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Info:
- *	Contains standard defines and IDs for NAND flash devices
- *
- * Changelog:
- *	See git changelog.
- */
-#ifndef __LINUX_MTD_NAND_H
-#define __LINUX_MTD_NAND_H
-
-#include <linux/wait.h>
-#include <linux/spinlock.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/flashchip.h>
-#include <linux/mtd/bbm.h>
-
-struct mtd_info;
-struct nand_flash_dev;
-/* Scan and identify a NAND device */
-extern int nand_scan(struct mtd_info *mtd, int max_chips);
-/*
- * Separate phases of nand_scan(), allowing board driver to intervene
- * and override command or ECC setup according to flash type.
- */
-extern int nand_scan_ident(struct mtd_info *mtd, int max_chips,
-			   struct nand_flash_dev *table);
-extern int nand_scan_tail(struct mtd_info *mtd);
-
-/* Free resources held by the NAND device */
-extern void nand_release(struct mtd_info *mtd);
-
-/* Internal helper for board drivers which need to override command function */
-extern void nand_wait_ready(struct mtd_info *mtd);
-
-/* locks all blocks present in the device */
-extern int nand_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len);
-
-/* unlocks specified locked blocks */
-extern int nand_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len);
-
-/* The maximum number of NAND chips in an array */
-#define NAND_MAX_CHIPS		8
-
-/*
- * This constant declares the max. oobsize / page, which
- * is supported now. If you add a chip with bigger oobsize/page
- * adjust this accordingly.
- */
-#define NAND_MAX_OOBSIZE	2560
-#define NAND_MAX_PAGESIZE	32768
-
-/*
- * Constants for hardware specific CLE/ALE/NCE function
- *
- * These are bits which can be or'ed to set/clear multiple
- * bits in one go.
- */
-/* Select the chip by setting nCE to low */
-#define NAND_NCE		0x01
-/* Select the command latch by setting CLE to high */
-#define NAND_CLE		0x02
-/* Select the address latch by setting ALE to high */
-#define NAND_ALE		0x04
-
-#define NAND_CTRL_CLE		(NAND_NCE | NAND_CLE)
-#define NAND_CTRL_ALE		(NAND_NCE | NAND_ALE)
-#define NAND_CTRL_CHANGE	0x80
-
-/*
- * Standard NAND flash commands
- */
-#define NAND_CMD_READ0		0
-#define NAND_CMD_READ1		1
-#define NAND_CMD_RNDOUT		5
-#define NAND_CMD_PAGEPROG	0x10
-#define NAND_CMD_READOOB	0x50
-#define NAND_CMD_ERASE1		0x60
-#define NAND_CMD_STATUS		0x70
-#define NAND_CMD_STATUS_MULTI	0x71
-#define NAND_CMD_SEQIN		0x80
-#define NAND_CMD_RNDIN		0x85
-#define NAND_CMD_READID		0x90
-#define NAND_CMD_ERASE2		0xd0
-#define NAND_CMD_ERASE3		0xd1
-#define NAND_CMD_PARAM		0xec
-#define NAND_CMD_RESET		0xff
-#define NAND_CMD_RESET_NO_STATUS_READ 0xFF1
-#define NAND_CMD_HYNIX_RETRY_END 0x38
-
-#define NAND_CMD_LOCK		0x2a
-#define NAND_CMD_UNLOCK1	0x23
-#define NAND_CMD_UNLOCK2	0x24
-
-/* Extended commands for large page devices */
-#define NAND_CMD_READSTART	0x30
-#define NAND_CMD_RNDOUTSTART	0xE0
-#define NAND_CMD_CACHEDPROG	0x15
-
-/* Extended commands for AG-AND device */
-/*
- * Note: the command for NAND_CMD_DEPLETE1 is really 0x00 but
- *       there is no way to distinguish that from NAND_CMD_READ0
- *       until the remaining sequence of commands has been completed
- *       so add a high order bit and mask it off in the command.
- */
-#define NAND_CMD_DEPLETE1	0x100
-#define NAND_CMD_DEPLETE2	0x38
-#define NAND_CMD_STATUS_MULTI	0x71
-#define NAND_CMD_STATUS_ERROR	0x72
-/* multi-bank error status (banks 0-3) */
-#define NAND_CMD_STATUS_ERROR0	0x73
-#define NAND_CMD_STATUS_ERROR1	0x74
-#define NAND_CMD_STATUS_ERROR2	0x75
-#define NAND_CMD_STATUS_ERROR3	0x76
-#define NAND_CMD_STATUS_RESET	0x7f
-#define NAND_CMD_STATUS_CLEAR	0xff
-
-#define MULTI_READ_1CYCLE       0x200
-#define MULTI_READ_2CYCLE       0x201
-#define MULTI_COPY_1CYCLE				0x202
-#define MULTI_COPY_2CYCLE				0x203
-#define MULTI_COPY_3CYCLE				0x204
-#define COPY_BACK_1CYCLE				0x205
-#define COPY_BACK_2CYCLE				0x206
-
-
-/*
- * Support Nand special commands
- */
-#define CACHE_READ							(1<<0)
-#define CACHE_PROG							(1<<1)
-#define COPY_BACK								(1<<2)
-#define INTEL_COPY_BACK					(1<<3)
-#define RANDOM_INPUT						(1<<4)
-#define RANDOM_OUTPUT						(1<<5)
-#define PLANE2_READ							(1<<6)
-#define PLANE2_PROG							(1<<7)
-#define PLANE2_CACHE_READ				(1<<8)
-#define PLANE2_CACHE_PROG				(1<<9)
-#define PLANE2_COPY_BACK				(1<<10)
-#define PLANE2_INTEL_COPY_BACK	(1<<11)
-#define PLANE2_RANDOM_OUTPUT		(1<<12)
-#define PLANE2_ERASE						(1<<13)
-
-#define PLANE4_READ							(1<<16)
-#define PLANE4_PROG							(1<<17)
-#define PLANE4_CACHE_READ				(1<<18)
-#define PLANE4_CACHE_PROG				(1<<19)
-#define PLANE4_COPY_BACK				(1<<20)
-#define PLANE4_INTEL_COPY_BACK	(1<<21)
-#define PLANE4_RANDOM_OUTPUT		(1<<22)
-#define PLANE4_ERASE						(1<<23)
-
-
-#define NAND_CMD_NONE		-1
-
-/* Status bits */
-#define NAND_STATUS_FAIL	0x01
-#define NAND_STATUS_FAIL_N1	0x02
-#define NAND_STATUS_TRUE_READY	0x20
-#define NAND_STATUS_READY	0x40
-#define NAND_STATUS_WP		0x80
-
-/*
- * Constants for ECC_MODES
- */
-typedef enum {
-	NAND_ECC_NONE,
-	NAND_ECC_SOFT,
-	NAND_ECC_HW,
-	NAND_ECC_HW_SYNDROME,
-	NAND_ECC_HW_OOB_FIRST,
-	NAND_ECC_SOFT_BCH,
-} nand_ecc_modes_t;
-
-/*
- * Constants for Hardware ECC
- */
-/* Reset Hardware ECC for read */
-#define NAND_ECC_READ		0
-/* Reset Hardware ECC for write */
-#define NAND_ECC_WRITE		1
-/* Enable Hardware ECC before syndrome is read back from flash */
-#define NAND_ECC_READSYN	2
-
-/* Bit mask for flags passed to do_nand_read_ecc */
-#define NAND_GET_DEVICE		0x80
-
-
-/*
- * Option constants for bizarre disfunctionality and real
- * features.
- */
-/* Chip can not auto increment pages */
-#define NAND_NO_AUTOINCR	0x00000001
-/* Buswidth is 16 bit */
-#define NAND_BUSWIDTH_16	0x00000002
-/* Device supports partial programming without padding */
-#define NAND_NO_PADDING		0x00000004
-/* Chip has cache program function */
-#define NAND_CACHEPRG		0x00000008
-/* Chip has copy back function */
-#define NAND_COPYBACK		0x00000010
-/*
- * AND Chip which has 4 banks and a confusing page / block
- * assignment. See Renesas datasheet for further information.
- */
-#define NAND_IS_AND		0x00000020
-/*
- * Chip has a array of 4 pages which can be read without
- * additional ready /busy waits.
- */
-#define NAND_4PAGE_ARRAY	0x00000040
-/*
- * Chip requires that BBT is periodically rewritten to prevent
- * bits from adjacent blocks from 'leaking' in altering data.
- * This happens with the Renesas AG-AND chips, possibly others.
- */
-#define BBT_AUTO_REFRESH	0x00000080
-/*
- * Chip does not require ready check on read. True
- * for all large page devices, as they do not support
- * autoincrement.
- */
-#define NAND_NO_READRDY		0x00000100
-/* Chip does not allow subpage writes */
-#define NAND_NO_SUBPAGE_WRITE	0x00000200
-
-/* Device is one of 'new' xD cards that expose fake nand command set */
-#define NAND_BROKEN_XD		0x00000400
-
-/* Device behaves just like nand, but is readonly */
-#define NAND_ROM		0x00000800
-
-/* Options valid for Samsung large page devices */
-#define NAND_SAMSUNG_LP_OPTIONS \
-	(NAND_NO_PADDING | NAND_CACHEPRG | NAND_COPYBACK)
-
-/* Macros to identify the above */
-#define NAND_CANAUTOINCR(chip) (!(chip->options & NAND_NO_AUTOINCR))
-#define NAND_MUST_PAD(chip) (!(chip->options & NAND_NO_PADDING))
-#define NAND_HAS_CACHEPROG(chip) ((chip->options & NAND_CACHEPRG))
-#define NAND_HAS_COPYBACK(chip) ((chip->options & NAND_COPYBACK))
-/* Large page NAND with SOFT_ECC should support subpage reads */
-#define NAND_SUBPAGE_READ(chip) ((chip->ecc.mode == NAND_ECC_SOFT) \
-					&& (chip->page_shift > 9))
-
-/* Mask to zero out the chip options, which come from the id table */
-#define NAND_CHIPOPTIONS_MSK	(0x0000ffff & ~NAND_NO_AUTOINCR)
-
-/* Non chip related options */
-/* This option skips the bbt scan during initialization. */
-#define NAND_SKIP_BBTSCAN	0x00010000
-/*
- * This option is defined if the board driver allocates its own buffers
- * (e.g. because it needs them DMA-coherent).
- */
-#define NAND_OWN_BUFFERS	0x00020000
-/* Chip may not exist, so silence any errors in scan */
-#define NAND_SCAN_SILENT_NODEV	0x00040000
-
-/* Options set by nand scan */
-/* Nand scan has allocated controller struct */
-#define NAND_CONTROLLER_ALLOC	0x80000000
-
-/* Cell info constants */
-#define NAND_CI_CHIPNR_MSK	0x03
-#define NAND_CI_CELLTYPE_MSK	0x0C
-
-/* Keep gcc happy */
-struct nand_chip;
-
-struct nand_onfi_params {
-	/* rev info and features block */
-	/* 'O' 'N' 'F' 'I'  */
-	u8 sig[4];
-	__le16 revision;
-	__le16 features;
-	__le16 opt_cmd;
-	u8 reserved[22];
-
-	/* manufacturer information block */
-	char manufacturer[12];
-	char model[20];
-	u8 jedec_id;
-	__le16 date_code;
-	u8 reserved2[13];
-
-	/* memory organization block */
-	__le32 byte_per_page;
-	__le16 spare_bytes_per_page;
-	__le32 data_bytes_per_ppage;
-	__le16 spare_bytes_per_ppage;
-	__le32 pages_per_block;
-	__le32 blocks_per_lun;
-	u8 lun_count;
-	u8 addr_cycles;
-	u8 bits_per_cell;
-	__le16 bb_per_lun;
-	__le16 block_endurance;
-	u8 guaranteed_good_blocks;
-	__le16 guaranteed_block_endurance;
-	u8 programs_per_page;
-	u8 ppage_attr;
-	u8 ecc_bits;
-	u8 interleaved_bits;
-	u8 interleaved_ops;
-	u8 reserved3[13];
-
-	/* electrical parameter block */
-	u8 io_pin_capacitance_max;
-	__le16 async_timing_mode;
-	__le16 program_cache_timing_mode;
-	__le16 t_prog;
-	__le16 t_bers;
-	__le16 t_r;
-	__le16 t_ccs;
-	__le16 src_sync_timing_mode;
-	__le16 src_ssync_features;
-	__le16 clk_pin_capacitance_typ;
-	__le16 io_pin_capacitance_typ;
-	__le16 input_pin_capacitance_typ;
-	u8 input_pin_capacitance_max;
-	u8 driver_strenght_support;
-	__le16 t_int_r;
-	__le16 t_ald;
-	u8 reserved4[7];
-
-	/* vendor */
-	u8 reserved5[90];
-
-	__le16 crc;
-} __attribute__((packed));
-
-#define ONFI_CRC_BASE	0x4F4E
-
-/**
- * struct nand_hw_control - Control structure for hardware controller (e.g ECC generator) shared among independent devices
- * @lock:               protection lock
- * @active:		the mtd device which holds the controller currently
- * @wq:			wait queue to sleep on if a NAND operation is in
- *			progress used instead of the per chip wait queue
- *			when a hw controller is available.
- */
-struct nand_hw_control {
-	spinlock_t lock;
-	struct nand_chip *active;
-	wait_queue_head_t wq;
-};
-
-/**
- * struct nand_ecc_ctrl - Control structure for ECC
- * @mode:	ECC mode
- * @steps:	number of ECC steps per page
- * @size:	data bytes per ECC step
- * @bytes:	ECC bytes per step
- * @strength:	max number of correctible bits per ECC step
- * @total:	total number of ECC bytes per page
- * @prepad:	padding information for syndrome based ECC generators
- * @postpad:	padding information for syndrome based ECC generators
- * @layout:	ECC layout control struct pointer
- * @priv:	pointer to private ECC control data
- * @hwctl:	function to control hardware ECC generator. Must only
- *		be provided if an hardware ECC is available
- * @calculate:	function for ECC calculation or readback from ECC hardware
- * @correct:	function for ECC correction, matching to ECC generator (sw/hw)
- * @read_page_raw:	function to read a raw page without ECC
- * @write_page_raw:	function to write a raw page without ECC
- * @read_page:	function to read a page according to the ECC generator
- *		requirements.
- * @read_subpage:	function to read parts of the page covered by ECC.
- * @write_page:	function to write a page according to the ECC generator
- *		requirements.
- * @write_oob_raw:	function to write chip OOB data without ECC
- * @read_oob_raw:	function to read chip OOB data without ECC
- * @read_oob:	function to read chip OOB data
- * @write_oob:	function to write chip OOB data
- */
-struct nand_ecc_ctrl {
-	nand_ecc_modes_t mode;
-	int steps;
-	int size;
-	int bytes;
-	int total;
-	int strength;
-	int prepad;
-	int postpad;
-	struct nand_ecclayout	*layout;
-	void *priv;
-	void (*hwctl)(struct mtd_info *mtd, int mode);
-	int (*calculate)(struct mtd_info *mtd, const uint8_t *dat,
-			uint8_t *ecc_code);
-	int (*correct)(struct mtd_info *mtd, uint8_t *dat, uint8_t *read_ecc,
-			uint8_t *calc_ecc);
-	int (*read_page_raw)(struct mtd_info *mtd, struct nand_chip *chip,
-			uint8_t *buf, int page);
-	void (*write_page_raw)(struct mtd_info *mtd, struct nand_chip *chip,
-			const uint8_t *buf);
-	int (*read_page)(struct mtd_info *mtd, struct nand_chip *chip,
-			uint8_t *buf, int page);
-	int (*read_subpage)(struct mtd_info *mtd, struct nand_chip *chip,
-			uint32_t offs, uint32_t len, uint8_t *buf);
-	void (*write_page)(struct mtd_info *mtd, struct nand_chip *chip,
-			const uint8_t *buf);
-	int (*write_oob_raw)(struct mtd_info *mtd, struct nand_chip *chip,
-			int page);
-	int (*read_oob_raw)(struct mtd_info *mtd, struct nand_chip *chip,
-			int page, int sndcmd);
-	int (*read_oob)(struct mtd_info *mtd, struct nand_chip *chip, int page,
-			int sndcmd);
-	int (*write_oob)(struct mtd_info *mtd, struct nand_chip *chip,
-			int page);
-        int			(*read_bb_oob)(struct mtd_info *mtd,
-					    struct nand_chip *chip,
-					    int page,
-					    int sndcmd);
-};
-
-/**
- * struct nand_buffers - buffer structure for read/write
- * @ecccalc:	buffer for calculated ECC
- * @ecccode:	buffer for ECC read from flash
- * @databuf:	buffer for data - dynamically sized
- *
- * Do not change the order of buffers. databuf and oobrbuf must be in
- * consecutive order.
- */
-struct nand_buffers {
-	uint8_t	ecccalc[NAND_MAX_OOBSIZE];
-	uint8_t	ecccode[NAND_MAX_OOBSIZE];
-	uint8_t databuf[NAND_MAX_PAGESIZE + NAND_MAX_OOBSIZE];
-};
-
-/**
- * struct nand_chip - NAND Private Flash Chip Data
- * @IO_ADDR_R:		[BOARDSPECIFIC] address to read the 8 I/O lines of the
- *			flash device
- * @IO_ADDR_W:		[BOARDSPECIFIC] address to write the 8 I/O lines of the
- *			flash device.
- * @read_byte:		[REPLACEABLE] read one byte from the chip
- * @read_word:		[REPLACEABLE] read one word from the chip
- * @write_buf:		[REPLACEABLE] write data from the buffer to the chip
- * @read_buf:		[REPLACEABLE] read data from the chip into the buffer
- * @verify_buf:		[REPLACEABLE] verify buffer contents against the chip
- *			data.
- * @select_chip:	[REPLACEABLE] select chip nr
- * @block_bad:		[REPLACEABLE] check, if the block is bad
- * @block_markbad:	[REPLACEABLE] mark the block bad
- * @cmd_ctrl:		[BOARDSPECIFIC] hardwarespecific function for controlling
- *			ALE/CLE/nCE. Also used to write command and address
- * @init_size:		[BOARDSPECIFIC] hardwarespecific function for setting
- *			mtd->oobsize, mtd->writesize and so on.
- *			@id_data contains the 8 bytes values of NAND_CMD_READID.
- *			Return with the bus width.
- * @dev_ready:		[BOARDSPECIFIC] hardwarespecific function for accessing
- *			device ready/busy line. If set to NULL no access to
- *			ready/busy is available and the ready/busy information
- *			is read from the chip status register.
- * @cmdfunc:		[REPLACEABLE] hardwarespecific function for writing
- *			commands to the chip.
- * @waitfunc:		[REPLACEABLE] hardwarespecific function for wait on
- *			ready.
- * @ecc:		[BOARDSPECIFIC] ECC control structure
- * @buffers:		buffer structure for read/write
- * @hwcontrol:		platform-specific hardware control structure
- * @erase_cmd:		[INTERN] erase command write function, selectable due
- *			to AND support.
- * @scan_bbt:		[REPLACEABLE] function to scan bad block table
- * @chip_delay:		[BOARDSPECIFIC] chip dependent delay for transferring
- *			data from array to read regs (tR).
- * @state:		[INTERN] the current state of the NAND device
- * @oob_poi:		"poison value buffer," used for laying out OOB data
- *			before writing
- * @page_shift:		[INTERN] number of address bits in a page (column
- *			address bits).
- * @phys_erase_shift:	[INTERN] number of address bits in a physical eraseblock
- * @bbt_erase_shift:	[INTERN] number of address bits in a bbt entry
- * @chip_shift:		[INTERN] number of address bits in one chip
- * @options:		[BOARDSPECIFIC] various chip options. They can partly
- *			be set to inform nand_scan about special functionality.
- *			See the defines for further explanation.
- * @bbt_options:	[INTERN] bad block specific options. All options used
- *			here must come from bbm.h. By default, these options
- *			will be copied to the appropriate nand_bbt_descr's.
- * @badblockpos:	[INTERN] position of the bad block marker in the oob
- *			area.
- * @badblockbits:	[INTERN] minimum number of set bits in a good block's
- *			bad block marker position; i.e., BBM == 11110111b is
- *			not bad when badblockbits == 7
- * @cellinfo:		[INTERN] MLC/multichip data from chip ident
- * @numchips:		[INTERN] number of physical chips
- * @chipsize:		[INTERN] the size of one chip for multichip arrays
- * @pagemask:		[INTERN] page number mask = number of (pages / chip) - 1
- * @pagebuf:		[INTERN] holds the pagenumber which is currently in
- *			data_buf.
- * @subpagesize:	[INTERN] holds the subpagesize
- * @onfi_version:	[INTERN] holds the chip ONFI version (BCD encoded),
- *			non 0 if ONFI supported.
- * @onfi_params:	[INTERN] holds the ONFI page parameter when ONFI is
- *			supported, 0 otherwise.
- * @ecclayout:		[REPLACEABLE] the default ECC placement scheme
- * @bbt:		[INTERN] bad block table pointer
- * @bbt_td:		[REPLACEABLE] bad block table descriptor for flash
- *			lookup.
- * @bbt_md:		[REPLACEABLE] bad block table mirror descriptor
- * @badblock_pattern:	[REPLACEABLE] bad block scan pattern used for initial
- *			bad block scan.
- * @controller:		[REPLACEABLE] a pointer to a hardware controller
- *			structure which is shared among multiple independent
- *			devices.
- * @priv:		[OPTIONAL] pointer to private chip data
- * @errstat:		[OPTIONAL] hardware specific function to perform
- *			additional error status checks (determine if errors are
- *			correctable).
- * @write_page:		[REPLACEABLE] High-level page write function
- */
-
-struct nand_chip {
-	void __iomem *IO_ADDR_R;
-	void __iomem *IO_ADDR_W;
-
-	uint8_t (*read_byte)(struct mtd_info *mtd);
-	u16 (*read_word)(struct mtd_info *mtd);
-	void (*write_buf)(struct mtd_info *mtd, const uint8_t *buf, int len);
-	void (*read_buf)(struct mtd_info *mtd, uint8_t *buf, int len);
-	int (*verify_buf)(struct mtd_info *mtd, const uint8_t *buf, int len);
-	void (*select_chip)(struct mtd_info *mtd, int chip);
-	int (*block_bad)(struct mtd_info *mtd, loff_t ofs, int getchip);
-	int (*block_markbad)(struct mtd_info *mtd, loff_t ofs, int type);
-	void (*cmd_ctrl)(struct mtd_info *mtd, int dat, unsigned int ctrl);
-	int (*init_size)(struct mtd_info *mtd, struct nand_chip *this,
-			u8 *id_data);
-	int (*dev_ready)(struct mtd_info *mtd);
-	void (*cmdfunc)(struct mtd_info *mtd, unsigned command, int column,
-			int page_addr);
-	int(*waitfunc)(struct mtd_info *mtd, struct nand_chip *this);
-	void (*erase_cmd)(struct mtd_info *mtd, int page);
-	int (*scan_bbt)(struct mtd_info *mtd);
-	int (*errstat)(struct mtd_info *mtd, struct nand_chip *this, int state,
-			int status, int page);
-	int (*write_page)(struct mtd_info *mtd, struct nand_chip *chip,
-			const uint8_t *buf, int page, int cached, int raw);
-	int (*get_para)(struct mtd_info *mtd, struct nand_chip *chip);
-
-	int chip_delay;
-	unsigned int options;
-	unsigned int bbt_options;
-
-	int page_shift;
-	int pagecnt_shift;
-	int phys_erase_shift;
-	int bbt_erase_shift;
-	int chip_shift;
-	int numchips;
-	uint64_t chipsize;
-	int pagemask;
-	int pagebuf;
-	int subpagesize;
-	uint8_t cellinfo;
-	int badblockpos;
-	int badblockbits;
-
-	int onfi_version;
-	struct nand_onfi_params	onfi_params;
-
-	flstate_t state;
-
-	uint8_t *oob_poi;
-	struct nand_hw_control *controller;
-	struct nand_ecclayout *ecclayout;
-
-	struct nand_ecc_ctrl ecc;
-	struct nand_buffers *buffers;
-	struct nand_hw_control hwcontrol;
-
-	uint8_t *bbt;
-	struct nand_bbt_descr *bbt_td;
-	struct nand_bbt_descr *bbt_md;
-
-	struct nand_bbt_descr *badblock_pattern;
-	struct nand_bbt_descr *retry_pattern;
-	int page_offset[2];
-	struct nand_read_retry_param *cur_chip;
-	int realplanenum;
-	int bbt_plane[2];
-	int status_plane[2];
-
-	void *priv;
-};
-
-/*
- * NAND Flash Manufacturer ID Codes
- */
-#define NAND_MFR_TOSHIBA	0x98
-#define NAND_MFR_SAMSUNG	0xec
-#define NAND_MFR_FUJITSU	0x04
-#define NAND_MFR_NATIONAL	0x8f
-#define NAND_MFR_RENESAS	0x07
-#define NAND_MFR_STMICRO	0x20
-#define NAND_MFR_HYNIX		0xad
-#define NAND_MFR_MICRON		0x2c
-#define NAND_MFR_SANDISK	0x45
-#define NAND_MFR_AMD		0x01
-#define NAND_MFR_INTEL		0x89
-#define NAND_MFR_MXIC 		0xc2
-#define NAND_MFR_MIRA 		0x92
-#define NAND_MFR_MACRONIX	0xc2
-
-/**
- * struct nand_flash_dev - NAND Flash Device ID Structure
- * @name:	Identify the device type
- * @id:		device ID code
- * @pagesize:	Pagesize in bytes. Either 256 or 512 or 0
- *		If the pagesize is 0, then the real pagesize
- *		and the eraseize are determined from the
- *		extended id bytes in the chip
- * @erasesize:	Size of an erase block in the flash device.
- * @chipsize:	Total chipsize in Mega Bytes
- * @options:	Bitfield to store chip relevant options
- */
-struct nand_flash_dev {
-	char *name;
-	int id;
-	unsigned long pagesize;
-	unsigned long chipsize;
-	unsigned long erasesize;
-	unsigned long options;
-};
-
-#define BOOT_MAGIC_SIZE 0x8
-struct nand_rdtry_param_hdr {
-	unsigned char magic[BOOT_MAGIC_SIZE];
-	unsigned int nand_id;  //nand id
-	unsigned int nand_id_5th;  //nand 5th id
-	unsigned int eslc_reg_cnt; // Enhanced SLC register count.
-	unsigned int total_retry_cnt; // total retry count
-	unsigned int retry_reg_cnt; // retry register count
-	//unsigned char eslc[eslc_reg]; //eslc default data.
-	//unsigned char retry_data[total_retry_cnt * retry_reg_cnt];  /* param data */
-};
-//All
-struct nand_read_retry_param {
-	char magic[32];
-	unsigned int  nand_id;
-	unsigned int  nand_id_5th;
-	unsigned int  eslc_reg_num;
-	unsigned char eslc_offset[32];
-	unsigned char eslc_def_value[32];
-	unsigned char eslc_set_value[32];
-	unsigned int  retry_reg_num;
-	unsigned char  retry_offset[32];
-	unsigned char retry_def_value[32];
-	unsigned char retry_value[256];
-	unsigned int otp_len;
-	unsigned char otp_offset[32];
-	unsigned char otp_data[32];
-	unsigned int total_try_times;
-	int cur_try_times;
-	int (*set_parameter)(struct mtd_info *mtd, int mode, int def_mode);
-	int (*get_parameter)(struct mtd_info *mtd, int mode);
-	int (*get_otp_table)(struct mtd_info *mtd, struct nand_chip *chip);
-	int retry; //1: in retry mode 
-};
-/* #define RETRY_DEBUG */
-
-
-/* DannierChen-2009-10-07 add for new nand flash support list */
-#ifndef DWORD
-#define DWORD	unsigned int
-#endif
-#define MAX_PRODUCT_NAME_LENGTH 0x20
-struct WMT_nand_flash_dev {
- DWORD dwFlashID;            //composed by 4 bytes of ID. For example:0xADF1801D
- DWORD dwBlockCount;      //block count of one chip. For example: 1024
- DWORD dwPageSize;       //page size. For example:2048(other value can be 512 or 4096)
- DWORD dwSpareSize;       //spare area size. For example:16(almost all kinds of nand is 16)
- DWORD dwBlockSize;       //block size = dwPageSize * PageCntPerBlock. For example:131072
- DWORD dwAddressCycle;      //address cycle 4 or 5
- DWORD dwBI0Position;      //BI0 page postion in block
- DWORD dwBI1Position;      //BI1 page postion in block
- DWORD dwBIOffset;       //BI offset in page
- DWORD dwDataWidth;      //data with X8 or X16
- DWORD dwPageProgramLimit;     //chip can program PAGE_PROGRAM_LIMIT times within the same page
- DWORD dwSeqRowReadSupport;    //whether support sequential row read, 1 = support 0 = not support
- DWORD dwSeqPageProgram;     //chip need sequential page program in a block. 1 = need
- DWORD dwNandType;       //MLC or SLC
- DWORD dwECCBitNum;      //ECC bit number needed
- DWORD dwRWTimming;     //NFC Read Pulse width and Read hold time, write so does. default =0x12101210
- DWORD dwTadl;      		//NFC write TADL timeing config
- DWORD dwDDR;      		  //NFC support toshia ddr(toggle) mode = 1 not support = 0
- DWORD dwRetry;    		  //NFC Read Retry support = 1 not support = 0
- DWORD dwRdmz;					//NFC Randomizer support = 1 not support = 0
- DWORD dwFlashID2;      //composed by additional 2 bytes of ID from original 4 bytes.
- DWORD dwSpeedUpCmd;		/* supprot speed up nand command ex: 2-plane cache read and so on.. */
- char ProductName[MAX_PRODUCT_NAME_LENGTH]; //product name. for example "HYNIX_NF_HY27UF081G2A"
- unsigned long options;
-};
-/**
- * struct nand_manufacturers - NAND Flash Manufacturer ID Structure
- * @name:	Manufacturer name
- * @id:		manufacturer ID code of device.
-*/
-struct nand_manufacturers {
-	int id;
-	char *name;
-};
-
-extern struct WMT_nand_flash_dev WMT_nand_flash_ids[];
-extern struct nand_flash_dev nand_flash_ids[];
-extern struct nand_manufacturers nand_manuf_ids[];
-
-extern int nand_scan_bbt(struct mtd_info *mtd, struct nand_bbt_descr *bd);
-extern int nand_update_bbt(struct mtd_info *mtd, loff_t offs);
-extern int nand_default_bbt(struct mtd_info *mtd);
-extern int nand_isbad_bbt(struct mtd_info *mtd, loff_t offs, int allowbbt, int allow_readfail);
-extern int nand_isbad_bbt_multi(struct mtd_info *mtd, loff_t offs, int allowbbt, int allow_readfail);
-extern int nand_erase_nand(struct mtd_info *mtd, struct erase_info *instr,
-			   int allowbbt);
-extern int nand_do_read(struct mtd_info *mtd, loff_t from, size_t len,
-			size_t *retlen, uint8_t *buf);
-extern struct nand_read_retry_param chip_table[];
-extern int hynix_get_parameter(struct mtd_info *mtd, int mode);
-extern int hynix_set_parameter(struct mtd_info *mtd, int mode, int def_mode);
-extern int hynix_get_otp(struct mtd_info *mtd, struct nand_chip *chip);
-extern int toshiba_get_parameter(struct mtd_info *mtd, int mode);
-extern int toshiba_set_parameter(struct mtd_info *mtd, int mode, int def_mode);
-extern int samsung_get_parameter(struct mtd_info *mtd, int mode);
-extern int samsung_set_parameter(struct mtd_info *mtd, int mode, int def_mode);
-extern int sandisk_get_parameter(struct mtd_info *mtd, int mode);
-extern int sandisk_set_parameter(struct mtd_info *mtd, int mode, int def_mode);
-extern int micron_get_parameter(struct mtd_info *mtd, int mode);
-extern int micron_set_parameter(struct mtd_info *mtd, int mode, int def_mode);
-
-
-
-#ifndef ARRAY_SIZE
-#define ARRAY_SIZE(a) (sizeof(a) / sizeof((a)[0]))
-#endif
-#define READ_RETRY_CHIP_NUM ARRAY_SIZE(chip_table)
-#define ESLC_MODE 0
-#define READ_RETRY_MODE 1
-#define TEST_MODE 2
-#define DEFAULT_VALUE 0
-#define ECC_ERROR_VALUE 1
-/**
- * struct platform_nand_chip - chip level device structure
- * @nr_chips:		max. number of chips to scan for
- * @chip_offset:	chip number offset
- * @nr_partitions:	number of partitions pointed to by partitions (or zero)
- * @partitions:		mtd partition list
- * @chip_delay:		R/B delay value in us
- * @options:		Option flags, e.g. 16bit buswidth
- * @bbt_options:	BBT option flags, e.g. NAND_BBT_USE_FLASH
- * @ecclayout:		ECC layout info structure
- * @part_probe_types:	NULL-terminated array of probe types
- */
-struct platform_nand_chip {
-	int nr_chips;
-	int chip_offset;
-	int nr_partitions;
-	struct mtd_partition *partitions;
-	struct nand_ecclayout *ecclayout;
-	int chip_delay;
-	unsigned int options;
-	unsigned int bbt_options;
-	const char **part_probe_types;
-};
-
-/* Keep gcc happy */
-struct platform_device;
-
-/**
- * struct platform_nand_ctrl - controller level device structure
- * @probe:		platform specific function to probe/setup hardware
- * @remove:		platform specific function to remove/teardown hardware
- * @hwcontrol:		platform specific hardware control structure
- * @dev_ready:		platform specific function to read ready/busy pin
- * @select_chip:	platform specific chip select function
- * @cmd_ctrl:		platform specific function for controlling
- *			ALE/CLE/nCE. Also used to write command and address
- * @write_buf:		platform specific function for write buffer
- * @read_buf:		platform specific function for read buffer
- * @priv:		private data to transport driver specific settings
- *
- * All fields are optional and depend on the hardware driver requirements
- */
-struct platform_nand_ctrl {
-	int (*probe)(struct platform_device *pdev);
-	void (*remove)(struct platform_device *pdev);
-	void (*hwcontrol)(struct mtd_info *mtd, int cmd);
-	int (*dev_ready)(struct mtd_info *mtd);
-	void (*select_chip)(struct mtd_info *mtd, int chip);
-	void (*cmd_ctrl)(struct mtd_info *mtd, int dat, unsigned int ctrl);
-	void (*write_buf)(struct mtd_info *mtd, const uint8_t *buf, int len);
-	void (*read_buf)(struct mtd_info *mtd, uint8_t *buf, int len);
-	void *priv;
-};
-
-/**
- * struct platform_nand_data - container structure for platform-specific data
- * @chip:		chip level chip structure
- * @ctrl:		controller level device structure
- */
-struct platform_nand_data {
-	struct platform_nand_chip chip;
-	struct platform_nand_ctrl ctrl;
-};
-
-/* Some helpers to access the data structures */
-static inline
-struct platform_nand_chip *get_platform_nandchip(struct mtd_info *mtd)
-{
-	struct nand_chip *chip = mtd->priv;
-
-	return chip->priv;
-}
-
-#endif /* __LINUX_MTD_NAND_H */
diff --git a/ANDROID_3.4.5/include/linux/mtd/nand_bch.h b/ANDROID_3.4.5/include/linux/mtd/nand_bch.h
deleted file mode 100644
index 74acf536..00000000
--- a/ANDROID_3.4.5/include/linux/mtd/nand_bch.h
+++ /dev/null
@@ -1,72 +0,0 @@
-/*
- * Copyright © 2011 Ivan Djelic <ivan.djelic@parrot.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This file is the header for the NAND BCH ECC implementation.
- */
-
-#ifndef __MTD_NAND_BCH_H__
-#define __MTD_NAND_BCH_H__
-
-struct mtd_info;
-struct nand_bch_control;
-
-#if defined(CONFIG_MTD_NAND_ECC_BCH)
-
-static inline int mtd_nand_has_bch(void) { return 1; }
-
-/*
- * Calculate BCH ecc code
- */
-int nand_bch_calculate_ecc(struct mtd_info *mtd, const u_char *dat,
-			   u_char *ecc_code);
-
-/*
- * Detect and correct bit errors
- */
-int nand_bch_correct_data(struct mtd_info *mtd, u_char *dat, u_char *read_ecc,
-			  u_char *calc_ecc);
-/*
- * Initialize BCH encoder/decoder
- */
-struct nand_bch_control *
-nand_bch_init(struct mtd_info *mtd, unsigned int eccsize,
-	      unsigned int eccbytes, struct nand_ecclayout **ecclayout);
-/*
- * Release BCH encoder/decoder resources
- */
-void nand_bch_free(struct nand_bch_control *nbc);
-
-#else /* !CONFIG_MTD_NAND_ECC_BCH */
-
-static inline int mtd_nand_has_bch(void) { return 0; }
-
-static inline int
-nand_bch_calculate_ecc(struct mtd_info *mtd, const u_char *dat,
-		       u_char *ecc_code)
-{
-	return -1;
-}
-
-static inline int
-nand_bch_correct_data(struct mtd_info *mtd, unsigned char *buf,
-		      unsigned char *read_ecc, unsigned char *calc_ecc)
-{
-	return -1;
-}
-
-static inline struct nand_bch_control *
-nand_bch_init(struct mtd_info *mtd, unsigned int eccsize,
-	      unsigned int eccbytes, struct nand_ecclayout **ecclayout)
-{
-	return NULL;
-}
-
-static inline void nand_bch_free(struct nand_bch_control *nbc) {}
-
-#endif /* CONFIG_MTD_NAND_ECC_BCH */
-
-#endif /* __MTD_NAND_BCH_H__ */
diff --git a/ANDROID_3.4.5/include/linux/mtd/nand_ecc.h b/ANDROID_3.4.5/include/linux/mtd/nand_ecc.h
deleted file mode 100644
index 4d8406c8..00000000
--- a/ANDROID_3.4.5/include/linux/mtd/nand_ecc.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- *  drivers/mtd/nand_ecc.h
- *
- *  Copyright (C) 2000-2010 Steven J. Hill <sjhill@realitydiluted.com>
- *			    David Woodhouse <dwmw2@infradead.org>
- *			    Thomas Gleixner <tglx@linutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This file is the header for the ECC algorithm.
- */
-
-#ifndef __MTD_NAND_ECC_H__
-#define __MTD_NAND_ECC_H__
-
-struct mtd_info;
-
-/*
- * Calculate 3 byte ECC code for eccsize byte block
- */
-void __nand_calculate_ecc(const u_char *dat, unsigned int eccsize,
-				u_char *ecc_code);
-
-/*
- * Calculate 3 byte ECC code for 256/512 byte block
- */
-int nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat, u_char *ecc_code);
-
-/*
- * Detect and correct a 1 bit error for eccsize byte block
- */
-int __nand_correct_data(u_char *dat, u_char *read_ecc, u_char *calc_ecc,
-			unsigned int eccsize);
-
-/*
- * Detect and correct a 1 bit error for 256/512 byte block
- */
-int nand_correct_data(struct mtd_info *mtd, u_char *dat, u_char *read_ecc, u_char *calc_ecc);
-
-#endif /* __MTD_NAND_ECC_H__ */
diff --git a/ANDROID_3.4.5/include/linux/mtd/ndfc.h b/ANDROID_3.4.5/include/linux/mtd/ndfc.h
deleted file mode 100644
index d0558a98..00000000
--- a/ANDROID_3.4.5/include/linux/mtd/ndfc.h
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
- *  linux/include/linux/mtd/ndfc.h
- *
- *  Copyright (c) 2006 Thomas Gleixner <tglx@linutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  Info:
- *   Contains defines, datastructures for ndfc nand controller
- *
- */
-#ifndef __LINUX_MTD_NDFC_H
-#define __LINUX_MTD_NDFC_H
-
-/* NDFC Register definitions */
-#define NDFC_CMD		0x00
-#define NDFC_ALE		0x04
-#define NDFC_DATA		0x08
-#define NDFC_ECC		0x10
-#define NDFC_BCFG0		0x30
-#define NDFC_BCFG1		0x34
-#define NDFC_BCFG2		0x38
-#define NDFC_BCFG3		0x3c
-#define NDFC_CCR		0x40
-#define NDFC_STAT		0x44
-#define NDFC_HWCTL		0x48
-#define NDFC_REVID		0x50
-
-#define NDFC_STAT_IS_READY	0x01000000
-
-#define NDFC_CCR_RESET_CE	0x80000000 /* CE Reset */
-#define NDFC_CCR_RESET_ECC	0x40000000 /* ECC Reset */
-#define NDFC_CCR_RIE		0x20000000 /* Interrupt Enable on Device Rdy */
-#define NDFC_CCR_REN		0x10000000 /* Enable wait for Rdy in LinearR */
-#define NDFC_CCR_ROMEN		0x08000000 /* Enable ROM In LinearR */
-#define NDFC_CCR_ARE		0x04000000 /* Auto-Read Enable */
-#define NDFC_CCR_BS(x)		(((x) & 0x3) << 24) /* Select Bank on CE[x] */
-#define NDFC_CCR_BS_MASK	0x03000000 /* Select Bank */
-#define NDFC_CCR_ARAC0		0x00000000 /* 3 Addr, 1 Col 2 Row 512b page */
-#define NDFC_CCR_ARAC1		0x00001000 /* 4 Addr, 1 Col 3 Row 512b page */
-#define NDFC_CCR_ARAC2		0x00002000 /* 4 Addr, 2 Col 2 Row 2K page */
-#define NDFC_CCR_ARAC3		0x00003000 /* 5 Addr, 2 Col 3 Row 2K page */
-#define NDFC_CCR_ARAC_MASK	0x00003000 /* Auto-Read mode Addr Cycles */
-#define NDFC_CCR_RPG		0x0000C000 /* Auto-Read Page */
-#define NDFC_CCR_EBCC		0x00000004 /* EBC Configuration Completed */
-#define NDFC_CCR_DHC		0x00000002 /* Direct Hardware Control Enable */
-
-#define NDFC_BxCFG_EN		0x80000000 /* Bank Enable */
-#define NDFC_BxCFG_CED		0x40000000 /* nCE Style */
-#define NDFC_BxCFG_SZ_MASK	0x08000000 /* Bank Size */
-#define NDFC_BxCFG_SZ_8BIT	0x00000000 /* 8bit */
-#define NDFC_BxCFG_SZ_16BIT	0x08000000 /* 16bit */
-
-#define NDFC_MAX_BANKS		4
-
-struct ndfc_controller_settings {
-	uint32_t	ccr_settings;
-	uint64_t	ndfc_erpn;
-};
-
-struct ndfc_chip_settings {
-	uint32_t	bank_settings;
-};
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/mtd/nftl.h b/ANDROID_3.4.5/include/linux/mtd/nftl.h
deleted file mode 100644
index b059629e..00000000
--- a/ANDROID_3.4.5/include/linux/mtd/nftl.h
+++ /dev/null
@@ -1,72 +0,0 @@
-/*
- * Copyright © 1999-2010 David Woodhouse <dwmw2@infradead.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- *
- */
-
-#ifndef __MTD_NFTL_H__
-#define __MTD_NFTL_H__
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/blktrans.h>
-
-#include <mtd/nftl-user.h>
-
-/* these info are used in ReplUnitTable */
-#define BLOCK_NIL          0xffff /* last block of a chain */
-#define BLOCK_FREE         0xfffe /* free block */
-#define BLOCK_NOTEXPLORED  0xfffd /* non explored block, only used during mounting */
-#define BLOCK_RESERVED     0xfffc /* bios block or bad block */
-
-struct NFTLrecord {
-	struct mtd_blktrans_dev mbd;
-	__u16 MediaUnit, SpareMediaUnit;
-	__u32 EraseSize;
-	struct NFTLMediaHeader MediaHdr;
-	int usecount;
-	unsigned char heads;
-	unsigned char sectors;
-	unsigned short cylinders;
-	__u16 numvunits;
-	__u16 lastEUN;                  /* should be suppressed */
-	__u16 numfreeEUNs;
-	__u16 LastFreeEUN; 		/* To speed up finding a free EUN */
-	int head,sect,cyl;
-	__u16 *EUNtable; 		/* [numvunits]: First EUN for each virtual unit  */
-	__u16 *ReplUnitTable; 		/* [numEUNs]: ReplUnitNumber for each */
-        unsigned int nb_blocks;		/* number of physical blocks */
-        unsigned int nb_boot_blocks;	/* number of blocks used by the bios */
-        struct erase_info instr;
-	struct nand_ecclayout oobinfo;
-};
-
-int NFTL_mount(struct NFTLrecord *s);
-int NFTL_formatblock(struct NFTLrecord *s, int block);
-
-int nftl_read_oob(struct mtd_info *mtd, loff_t offs, size_t len,
-		  size_t *retlen, uint8_t *buf);
-int nftl_write_oob(struct mtd_info *mtd, loff_t offs, size_t len,
-		   size_t *retlen, uint8_t *buf);
-
-#ifndef NFTL_MAJOR
-#define NFTL_MAJOR 93
-#endif
-
-#define MAX_NFTLS 16
-#define MAX_SECTORS_PER_UNIT 64
-#define NFTL_PARTN_BITS 4
-
-#endif /* __MTD_NFTL_H__ */
diff --git a/ANDROID_3.4.5/include/linux/mtd/onenand.h b/ANDROID_3.4.5/include/linux/mtd/onenand.h
deleted file mode 100644
index 4596503c..00000000
--- a/ANDROID_3.4.5/include/linux/mtd/onenand.h
+++ /dev/null
@@ -1,242 +0,0 @@
-/*
- *  linux/include/linux/mtd/onenand.h
- *
- *  Copyright © 2005-2009 Samsung Electronics
- *  Kyungmin Park <kyungmin.park@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __LINUX_MTD_ONENAND_H
-#define __LINUX_MTD_ONENAND_H
-
-#include <linux/spinlock.h>
-#include <linux/completion.h>
-#include <linux/mtd/flashchip.h>
-#include <linux/mtd/onenand_regs.h>
-#include <linux/mtd/bbm.h>
-
-#define MAX_DIES		2
-#define MAX_BUFFERRAM		2
-
-/* Scan and identify a OneNAND device */
-extern int onenand_scan(struct mtd_info *mtd, int max_chips);
-/* Free resources held by the OneNAND device */
-extern void onenand_release(struct mtd_info *mtd);
-
-/**
- * struct onenand_bufferram - OneNAND BufferRAM Data
- * @blockpage:		block & page address in BufferRAM
- */
-struct onenand_bufferram {
-	int	blockpage;
-};
-
-/**
- * struct onenand_chip - OneNAND Private Flash Chip Data
- * @base:		[BOARDSPECIFIC] address to access OneNAND
- * @dies:		[INTERN][FLEX-ONENAND] number of dies on chip
- * @boundary:		[INTERN][FLEX-ONENAND] Boundary of the dies
- * @diesize:		[INTERN][FLEX-ONENAND] Size of the dies
- * @chipsize:		[INTERN] the size of one chip for multichip arrays
- *			FIXME For Flex-OneNAND, chipsize holds maximum possible
- *			device size ie when all blocks are considered MLC
- * @device_id:		[INTERN] device ID
- * @density_mask:	chip density, used for DDP devices
- * @verstion_id:	[INTERN] version ID
- * @options:		[BOARDSPECIFIC] various chip options. They can
- *			partly be set to inform onenand_scan about
- * @erase_shift:	[INTERN] number of address bits in a block
- * @page_shift:		[INTERN] number of address bits in a page
- * @page_mask:		[INTERN] a page per block mask
- * @writesize:		[INTERN] a real page size
- * @bufferram_index:	[INTERN] BufferRAM index
- * @bufferram:		[INTERN] BufferRAM info
- * @readw:		[REPLACEABLE] hardware specific function for read short
- * @writew:		[REPLACEABLE] hardware specific function for write short
- * @command:		[REPLACEABLE] hardware specific function for writing
- *			commands to the chip
- * @wait:		[REPLACEABLE] hardware specific function for wait on ready
- * @bbt_wait:		[REPLACEABLE] hardware specific function for bbt wait on ready
- * @unlock_all:		[REPLACEABLE] hardware specific function for unlock all
- * @read_bufferram:	[REPLACEABLE] hardware specific function for BufferRAM Area
- * @write_bufferram:	[REPLACEABLE] hardware specific function for BufferRAM Area
- * @read_word:		[REPLACEABLE] hardware specific function for read
- *			register of OneNAND
- * @write_word:		[REPLACEABLE] hardware specific function for write
- *			register of OneNAND
- * @mmcontrol:		sync burst read function
- * @chip_probe:		[REPLACEABLE] hardware specific function for chip probe
- * @block_markbad:	function to mark a block as bad
- * @scan_bbt:		[REPLACEALBE] hardware specific function for scanning
- *			Bad block Table
- * @chip_lock:		[INTERN] spinlock used to protect access to this
- *			structure and the chip
- * @wq:			[INTERN] wait queue to sleep on if a OneNAND
- *			operation is in progress
- * @state:		[INTERN] the current state of the OneNAND device
- * @page_buf:		[INTERN] page main data buffer
- * @oob_buf:		[INTERN] page oob data buffer
- * @subpagesize:	[INTERN] holds the subpagesize
- * @ecclayout:		[REPLACEABLE] the default ecc placement scheme
- * @bbm:		[REPLACEABLE] pointer to Bad Block Management
- * @priv:		[OPTIONAL] pointer to private chip date
- */
-struct onenand_chip {
-	void __iomem		*base;
-	unsigned		dies;
-	unsigned		boundary[MAX_DIES];
-	loff_t			diesize[MAX_DIES];
-	unsigned int		chipsize;
-	unsigned int		device_id;
-	unsigned int		version_id;
-	unsigned int		technology;
-	unsigned int		density_mask;
-	unsigned int		options;
-
-	unsigned int		erase_shift;
-	unsigned int		page_shift;
-	unsigned int		page_mask;
-	unsigned int		writesize;
-
-	unsigned int		bufferram_index;
-	struct onenand_bufferram	bufferram[MAX_BUFFERRAM];
-
-	int (*command)(struct mtd_info *mtd, int cmd, loff_t address, size_t len);
-	int (*wait)(struct mtd_info *mtd, int state);
-	int (*bbt_wait)(struct mtd_info *mtd, int state);
-	void (*unlock_all)(struct mtd_info *mtd);
-	int (*read_bufferram)(struct mtd_info *mtd, int area,
-			unsigned char *buffer, int offset, size_t count);
-	int (*write_bufferram)(struct mtd_info *mtd, int area,
-			const unsigned char *buffer, int offset, size_t count);
-	unsigned short (*read_word)(void __iomem *addr);
-	void (*write_word)(unsigned short value, void __iomem *addr);
-	void (*mmcontrol)(struct mtd_info *mtd, int sync_read);
-	int (*chip_probe)(struct mtd_info *mtd);
-	int (*block_markbad)(struct mtd_info *mtd, loff_t ofs);
-	int (*scan_bbt)(struct mtd_info *mtd);
-	int (*enable)(struct mtd_info *mtd);
-	int (*disable)(struct mtd_info *mtd);
-
-	struct completion	complete;
-	int			irq;
-
-	spinlock_t		chip_lock;
-	wait_queue_head_t	wq;
-	flstate_t		state;
-	unsigned char		*page_buf;
-	unsigned char		*oob_buf;
-#ifdef CONFIG_MTD_ONENAND_VERIFY_WRITE
-	unsigned char		*verify_buf;
-#endif
-
-	int			subpagesize;
-	struct nand_ecclayout	*ecclayout;
-
-	void			*bbm;
-
-	void			*priv;
-
-	/*
-	 * Shows that the current operation is composed
-	 * of sequence of commands. For example, cache program.
-	 * Such command status OnGo bit is checked at the end of
-	 * sequence.
-	 */
-	unsigned int		ongoing;
-};
-
-/*
- * Helper macros
- */
-#define ONENAND_PAGES_PER_BLOCK        (1<<6)
-
-#define ONENAND_CURRENT_BUFFERRAM(this)		(this->bufferram_index)
-#define ONENAND_NEXT_BUFFERRAM(this)		(this->bufferram_index ^ 1)
-#define ONENAND_SET_NEXT_BUFFERRAM(this)	(this->bufferram_index ^= 1)
-#define ONENAND_SET_PREV_BUFFERRAM(this)	(this->bufferram_index ^= 1)
-#define ONENAND_SET_BUFFERRAM0(this)		(this->bufferram_index = 0)
-#define ONENAND_SET_BUFFERRAM1(this)		(this->bufferram_index = 1)
-
-#define FLEXONENAND(this)						\
-	(this->device_id & DEVICE_IS_FLEXONENAND)
-#define ONENAND_GET_SYS_CFG1(this)					\
-	(this->read_word(this->base + ONENAND_REG_SYS_CFG1))
-#define ONENAND_SET_SYS_CFG1(v, this)					\
-	(this->write_word(v, this->base + ONENAND_REG_SYS_CFG1))
-
-#define ONENAND_IS_DDP(this)						\
-	(this->device_id & ONENAND_DEVICE_IS_DDP)
-
-#define ONENAND_IS_MLC(this)						\
-	(this->technology & ONENAND_TECHNOLOGY_IS_MLC)
-
-#ifdef CONFIG_MTD_ONENAND_2X_PROGRAM
-#define ONENAND_IS_2PLANE(this)						\
-	(this->options & ONENAND_HAS_2PLANE)
-#else
-#define ONENAND_IS_2PLANE(this)			(0)
-#endif
-
-#define ONENAND_IS_CACHE_PROGRAM(this)					\
-	(this->options & ONENAND_HAS_CACHE_PROGRAM)
-
-#define ONENAND_IS_NOP_1(this)						\
-	(this->options & ONENAND_HAS_NOP_1)
-
-/* Check byte access in OneNAND */
-#define ONENAND_CHECK_BYTE_ACCESS(addr)		(addr & 0x1)
-
-/*
- * Options bits
- */
-#define ONENAND_HAS_CONT_LOCK		(0x0001)
-#define ONENAND_HAS_UNLOCK_ALL		(0x0002)
-#define ONENAND_HAS_2PLANE		(0x0004)
-#define ONENAND_HAS_4KB_PAGE		(0x0008)
-#define ONENAND_HAS_CACHE_PROGRAM	(0x0010)
-#define ONENAND_HAS_NOP_1		(0x0020)
-#define ONENAND_SKIP_UNLOCK_CHECK	(0x0100)
-#define ONENAND_PAGEBUF_ALLOC		(0x1000)
-#define ONENAND_OOBBUF_ALLOC		(0x2000)
-#define ONENAND_SKIP_INITIAL_UNLOCKING	(0x4000)
-
-#define ONENAND_IS_4KB_PAGE(this)					\
-	(this->options & ONENAND_HAS_4KB_PAGE)
-
-/*
- * OneNAND Flash Manufacturer ID Codes
- */
-#define ONENAND_MFR_SAMSUNG	0xec
-#define ONENAND_MFR_NUMONYX	0x20
-
-/**
- * struct onenand_manufacturers - NAND Flash Manufacturer ID Structure
- * @name:	Manufacturer name
- * @id:		manufacturer ID code of device.
-*/
-struct onenand_manufacturers {
-        int id;
-        char *name;
-};
-
-int onenand_bbt_read_oob(struct mtd_info *mtd, loff_t from,
-			 struct mtd_oob_ops *ops);
-unsigned onenand_block(struct onenand_chip *this, loff_t addr);
-loff_t onenand_addr(struct onenand_chip *this, int block);
-int flexonenand_region(struct mtd_info *mtd, loff_t addr);
-
-struct mtd_partition;
-
-struct onenand_platform_data {
-	void		(*mmcontrol)(struct mtd_info *mtd, int sync_read);
-	int		(*read_bufferram)(struct mtd_info *mtd, int area,
-			unsigned char *buffer, int offset, size_t count);
-	struct mtd_partition *parts;
-	unsigned int	nr_parts;
-};
-
-#endif	/* __LINUX_MTD_ONENAND_H */
diff --git a/ANDROID_3.4.5/include/linux/mtd/onenand_regs.h b/ANDROID_3.4.5/include/linux/mtd/onenand_regs.h
deleted file mode 100644
index d60130f8..00000000
--- a/ANDROID_3.4.5/include/linux/mtd/onenand_regs.h
+++ /dev/null
@@ -1,223 +0,0 @@
-/*
- *  linux/include/linux/mtd/onenand_regs.h
- *
- *  OneNAND Register header file
- *
- *  Copyright (C) 2005-2007 Samsung Electronics
- *  Kyungmin Park <kyungmin.park@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ONENAND_REG_H
-#define __ONENAND_REG_H
-
-/* Memory Address Map Translation (Word order) */
-#define ONENAND_MEMORY_MAP(x)		((x) << 1)
-
-/*
- * External BufferRAM area
- */
-#define	ONENAND_BOOTRAM			ONENAND_MEMORY_MAP(0x0000)
-#define	ONENAND_DATARAM			ONENAND_MEMORY_MAP(0x0200)
-#define	ONENAND_SPARERAM		ONENAND_MEMORY_MAP(0x8010)
-
-/*
- * OneNAND Registers
- */
-#define ONENAND_REG_MANUFACTURER_ID	ONENAND_MEMORY_MAP(0xF000)
-#define ONENAND_REG_DEVICE_ID		ONENAND_MEMORY_MAP(0xF001)
-#define ONENAND_REG_VERSION_ID		ONENAND_MEMORY_MAP(0xF002)
-#define ONENAND_REG_DATA_BUFFER_SIZE	ONENAND_MEMORY_MAP(0xF003)
-#define ONENAND_REG_BOOT_BUFFER_SIZE	ONENAND_MEMORY_MAP(0xF004)
-#define ONENAND_REG_NUM_BUFFERS		ONENAND_MEMORY_MAP(0xF005)
-#define ONENAND_REG_TECHNOLOGY		ONENAND_MEMORY_MAP(0xF006)
-
-#define ONENAND_REG_START_ADDRESS1	ONENAND_MEMORY_MAP(0xF100)
-#define ONENAND_REG_START_ADDRESS2	ONENAND_MEMORY_MAP(0xF101)
-#define ONENAND_REG_START_ADDRESS3	ONENAND_MEMORY_MAP(0xF102)
-#define ONENAND_REG_START_ADDRESS4	ONENAND_MEMORY_MAP(0xF103)
-#define ONENAND_REG_START_ADDRESS5	ONENAND_MEMORY_MAP(0xF104)
-#define ONENAND_REG_START_ADDRESS6	ONENAND_MEMORY_MAP(0xF105)
-#define ONENAND_REG_START_ADDRESS7	ONENAND_MEMORY_MAP(0xF106)
-#define ONENAND_REG_START_ADDRESS8	ONENAND_MEMORY_MAP(0xF107)
-
-#define ONENAND_REG_START_BUFFER	ONENAND_MEMORY_MAP(0xF200)
-#define ONENAND_REG_COMMAND		ONENAND_MEMORY_MAP(0xF220)
-#define ONENAND_REG_SYS_CFG1		ONENAND_MEMORY_MAP(0xF221)
-#define ONENAND_REG_SYS_CFG2		ONENAND_MEMORY_MAP(0xF222)
-#define ONENAND_REG_CTRL_STATUS		ONENAND_MEMORY_MAP(0xF240)
-#define ONENAND_REG_INTERRUPT		ONENAND_MEMORY_MAP(0xF241)
-#define ONENAND_REG_START_BLOCK_ADDRESS	ONENAND_MEMORY_MAP(0xF24C)
-#define ONENAND_REG_END_BLOCK_ADDRESS	ONENAND_MEMORY_MAP(0xF24D)
-#define ONENAND_REG_WP_STATUS		ONENAND_MEMORY_MAP(0xF24E)
-
-#define ONENAND_REG_ECC_STATUS		ONENAND_MEMORY_MAP(0xFF00)
-#define ONENAND_REG_ECC_M0		ONENAND_MEMORY_MAP(0xFF01)
-#define ONENAND_REG_ECC_S0		ONENAND_MEMORY_MAP(0xFF02)
-#define ONENAND_REG_ECC_M1		ONENAND_MEMORY_MAP(0xFF03)
-#define ONENAND_REG_ECC_S1		ONENAND_MEMORY_MAP(0xFF04)
-#define ONENAND_REG_ECC_M2		ONENAND_MEMORY_MAP(0xFF05)
-#define ONENAND_REG_ECC_S2		ONENAND_MEMORY_MAP(0xFF06)
-#define ONENAND_REG_ECC_M3		ONENAND_MEMORY_MAP(0xFF07)
-#define ONENAND_REG_ECC_S3		ONENAND_MEMORY_MAP(0xFF08)
-
-/*
- * Device ID Register F001h (R)
- */
-#define DEVICE_IS_FLEXONENAND		(1 << 9)
-#define FLEXONENAND_PI_MASK		(0x3ff)
-#define FLEXONENAND_PI_UNLOCK_SHIFT	(14)
-#define ONENAND_DEVICE_DENSITY_MASK	(0xf)
-#define ONENAND_DEVICE_DENSITY_SHIFT	(4)
-#define ONENAND_DEVICE_IS_DDP		(1 << 3)
-#define ONENAND_DEVICE_IS_DEMUX		(1 << 2)
-#define ONENAND_DEVICE_VCC_MASK		(0x3)
-
-#define ONENAND_DEVICE_DENSITY_512Mb	(0x002)
-#define ONENAND_DEVICE_DENSITY_1Gb	(0x003)
-#define ONENAND_DEVICE_DENSITY_2Gb	(0x004)
-#define ONENAND_DEVICE_DENSITY_4Gb	(0x005)
-
-/*
- * Version ID Register F002h (R)
- */
-#define ONENAND_VERSION_PROCESS_SHIFT	(8)
-
-/*
- * Technology Register F006h (R)
- */
-#define ONENAND_TECHNOLOGY_IS_MLC	(1 << 0)
-
-/*
- * Start Address 1 F100h (R/W) & Start Address 2 F101h (R/W)
- */
-#define ONENAND_DDP_SHIFT		(15)
-#define ONENAND_DDP_CHIP0		(0)
-#define ONENAND_DDP_CHIP1		(1 << ONENAND_DDP_SHIFT)
-
-/*
- * Start Address 8 F107h (R/W)
- */
-/* Note: It's actually 0x3f in case of SLC */
-#define ONENAND_FPA_MASK		(0x7f)
-#define ONENAND_FPA_SHIFT		(2)
-#define ONENAND_FSA_MASK		(0x03)
-
-/*
- * Start Buffer Register F200h (R/W)
- */
-#define ONENAND_BSA_MASK		(0x03)
-#define ONENAND_BSA_SHIFT		(8)
-#define ONENAND_BSA_BOOTRAM		(0 << 2)
-#define ONENAND_BSA_DATARAM0		(2 << 2)
-#define ONENAND_BSA_DATARAM1		(3 << 2)
-/* Note: It's actually 0x03 in case of SLC */
-#define ONENAND_BSC_MASK		(0x07)
-
-/*
- * Command Register F220h (R/W)
- */
-#define ONENAND_CMD_READ		(0x00)
-#define ONENAND_CMD_READOOB		(0x13)
-#define ONENAND_CMD_PROG		(0x80)
-#define ONENAND_CMD_PROGOOB		(0x1A)
-#define ONENAND_CMD_2X_PROG		(0x7D)
-#define ONENAND_CMD_2X_CACHE_PROG	(0x7F)
-#define ONENAND_CMD_UNLOCK		(0x23)
-#define ONENAND_CMD_LOCK		(0x2A)
-#define ONENAND_CMD_LOCK_TIGHT		(0x2C)
-#define ONENAND_CMD_UNLOCK_ALL		(0x27)
-#define ONENAND_CMD_ERASE		(0x94)
-#define ONENAND_CMD_MULTIBLOCK_ERASE	(0x95)
-#define ONENAND_CMD_ERASE_VERIFY	(0x71)
-#define ONENAND_CMD_RESET		(0xF0)
-#define ONENAND_CMD_OTP_ACCESS		(0x65)
-#define ONENAND_CMD_READID		(0x90)
-#define FLEXONENAND_CMD_PI_UPDATE	(0x05)
-#define FLEXONENAND_CMD_PI_ACCESS	(0x66)
-#define FLEXONENAND_CMD_RECOVER_LSB	(0x05)
-
-/* NOTE: Those are not *REAL* commands */
-#define ONENAND_CMD_BUFFERRAM		(0x1978)
-#define FLEXONENAND_CMD_READ_PI		(0x1985)
-
-/*
- * System Configuration 1 Register F221h (R, R/W)
- */
-#define ONENAND_SYS_CFG1_SYNC_READ	(1 << 15)
-#define ONENAND_SYS_CFG1_BRL_7		(7 << 12)
-#define ONENAND_SYS_CFG1_BRL_6		(6 << 12)
-#define ONENAND_SYS_CFG1_BRL_5		(5 << 12)
-#define ONENAND_SYS_CFG1_BRL_4		(4 << 12)
-#define ONENAND_SYS_CFG1_BRL_3		(3 << 12)
-#define ONENAND_SYS_CFG1_BRL_10		(2 << 12)
-#define ONENAND_SYS_CFG1_BRL_9		(1 << 12)
-#define ONENAND_SYS_CFG1_BRL_8		(0 << 12)
-#define ONENAND_SYS_CFG1_BRL_SHIFT	(12)
-#define ONENAND_SYS_CFG1_BL_32		(4 << 9)
-#define ONENAND_SYS_CFG1_BL_16		(3 << 9)
-#define ONENAND_SYS_CFG1_BL_8		(2 << 9)
-#define ONENAND_SYS_CFG1_BL_4		(1 << 9)
-#define ONENAND_SYS_CFG1_BL_CONT	(0 << 9)
-#define ONENAND_SYS_CFG1_BL_SHIFT	(9)
-#define ONENAND_SYS_CFG1_NO_ECC		(1 << 8)
-#define ONENAND_SYS_CFG1_RDY		(1 << 7)
-#define ONENAND_SYS_CFG1_INT		(1 << 6)
-#define ONENAND_SYS_CFG1_IOBE		(1 << 5)
-#define ONENAND_SYS_CFG1_RDY_CONF	(1 << 4)
-#define ONENAND_SYS_CFG1_VHF		(1 << 3)
-#define ONENAND_SYS_CFG1_HF		(1 << 2)
-#define ONENAND_SYS_CFG1_SYNC_WRITE	(1 << 1)
-
-/*
- * Controller Status Register F240h (R)
- */
-#define ONENAND_CTRL_ONGO		(1 << 15)
-#define ONENAND_CTRL_LOCK		(1 << 14)
-#define ONENAND_CTRL_LOAD		(1 << 13)
-#define ONENAND_CTRL_PROGRAM		(1 << 12)
-#define ONENAND_CTRL_ERASE		(1 << 11)
-#define ONENAND_CTRL_ERROR		(1 << 10)
-#define ONENAND_CTRL_RSTB		(1 << 7)
-#define ONENAND_CTRL_OTP_L		(1 << 6)
-#define ONENAND_CTRL_OTP_BL		(1 << 5)
-
-/*
- * Interrupt Status Register F241h (R)
- */
-#define ONENAND_INT_MASTER		(1 << 15)
-#define ONENAND_INT_READ		(1 << 7)
-#define ONENAND_INT_WRITE		(1 << 6)
-#define ONENAND_INT_ERASE		(1 << 5)
-#define ONENAND_INT_RESET		(1 << 4)
-#define ONENAND_INT_CLEAR		(0 << 0)
-
-/*
- * NAND Flash Write Protection Status Register F24Eh (R)
- */
-#define ONENAND_WP_US			(1 << 2)
-#define ONENAND_WP_LS			(1 << 1)
-#define ONENAND_WP_LTS			(1 << 0)
-
-/*
- * ECC Status Reigser FF00h (R)
- */
-#define ONENAND_ECC_1BIT		(1 << 0)
-#define ONENAND_ECC_1BIT_ALL		(0x5555)
-#define ONENAND_ECC_2BIT		(1 << 1)
-#define ONENAND_ECC_2BIT_ALL		(0xAAAA)
-#define FLEXONENAND_UNCORRECTABLE_ERROR	(0x1010)
-#define ONENAND_ECC_3BIT		(1 << 2)
-#define ONENAND_ECC_4BIT		(1 << 3)
-#define ONENAND_ECC_4BIT_UNCORRECTABLE	(0x1010)
-
-/*
- * One-Time Programmable (OTP)
- */
-#define FLEXONENAND_OTP_LOCK_OFFSET		(2048)
-#define ONENAND_OTP_LOCK_OFFSET		(14)
-
-#endif	/* __ONENAND_REG_H */
diff --git a/ANDROID_3.4.5/include/linux/mtd/partitions.h b/ANDROID_3.4.5/include/linux/mtd/partitions.h
deleted file mode 100644
index e4f732ae..00000000
--- a/ANDROID_3.4.5/include/linux/mtd/partitions.h
+++ /dev/null
@@ -1,87 +0,0 @@
-/*
- * MTD partitioning layer definitions
- *
- * (C) 2000 Nicolas Pitre <nico@fluxnic.net>
- *
- * This code is GPL
- */
-
-#ifndef MTD_PARTITIONS_H
-#define MTD_PARTITIONS_H
-
-#include <linux/types.h>
-
-
-/*
- * Partition definition structure:
- *
- * An array of struct partition is passed along with a MTD object to
- * mtd_device_register() to create them.
- *
- * For each partition, these fields are available:
- * name: string that will be used to label the partition's MTD device.
- * size: the partition size; if defined as MTDPART_SIZ_FULL, the partition
- * 	will extend to the end of the master MTD device.
- * offset: absolute starting position within the master MTD device; if
- * 	defined as MTDPART_OFS_APPEND, the partition will start where the
- *	previous one ended; if MTDPART_OFS_NXTBLK, at the next erase block;
- *	if MTDPART_OFS_RETAIN, consume as much as possible, leaving size
- *	after the end of partition.
- * mask_flags: contains flags that have to be masked (removed) from the
- * 	master MTD flag set for the corresponding MTD partition.
- * 	For example, to force a read-only partition, simply adding
- * 	MTD_WRITEABLE to the mask_flags will do the trick.
- *
- * Note: writeable partitions require their size and offset be
- * erasesize aligned (e.g. use MTDPART_OFS_NEXTBLK).
- */
-
-struct mtd_partition {
-	char *name;			/* identifier string */
-	uint64_t size;			/* partition size */
-	uint64_t offset;		/* offset within the master MTD space */
-	uint32_t mask_flags;		/* master MTD flags to mask out for this partition */
-	struct nand_ecclayout *ecclayout;	/* out of band layout for this partition (NAND only) */
-};
-
-#define MTDPART_OFS_RETAIN	(-3)
-#define MTDPART_OFS_NXTBLK	(-2)
-#define MTDPART_OFS_APPEND	(-1)
-#define MTDPART_SIZ_FULL	(0)
-
-
-struct mtd_info;
-struct device_node;
-
-/**
- * struct mtd_part_parser_data - used to pass data to MTD partition parsers.
- * @origin: for RedBoot, start address of MTD device
- * @of_node: for OF parsers, device node containing partitioning information
- */
-struct mtd_part_parser_data {
-	unsigned long origin;
-	struct device_node *of_node;
-};
-
-
-/*
- * Functions dealing with the various ways of partitioning the space
- */
-
-struct mtd_part_parser {
-	struct list_head list;
-	struct module *owner;
-	const char *name;
-	int (*parse_fn)(struct mtd_info *, struct mtd_partition **,
-			struct mtd_part_parser_data *);
-};
-
-extern int register_mtd_parser(struct mtd_part_parser *parser);
-extern int deregister_mtd_parser(struct mtd_part_parser *parser);
-
-int mtd_is_partition(struct mtd_info *mtd);
-int mtd_add_partition(struct mtd_info *master, char *name,
-		      long long offset, long long length);
-int mtd_del_partition(struct mtd_info *master, int partno);
-uint64_t mtd_get_device_size(struct mtd_info *mtd);
-#endif
diff --git a/ANDROID_3.4.5/include/linux/mtd/pfow.h b/ANDROID_3.4.5/include/linux/mtd/pfow.h
deleted file mode 100644
index b730d4f8..00000000
--- a/ANDROID_3.4.5/include/linux/mtd/pfow.h
+++ /dev/null
@@ -1,159 +0,0 @@
-/* Primary function overlay window definitions
- * and service functions used by LPDDR chips
- */
-#ifndef __LINUX_MTD_PFOW_H
-#define __LINUX_MTD_PFOW_H
-
-#include <linux/mtd/qinfo.h>
-
-/* PFOW registers addressing */
-/* Address of symbol "P" */
-#define PFOW_QUERY_STRING_P			0x0000
-/* Address of symbol "F" */
-#define PFOW_QUERY_STRING_F			0x0002
-/* Address of symbol "O" */
-#define PFOW_QUERY_STRING_O			0x0004
-/* Address of symbol "W" */
-#define PFOW_QUERY_STRING_W			0x0006
-/* Identification info for LPDDR chip */
-#define PFOW_MANUFACTURER_ID			0x0020
-#define PFOW_DEVICE_ID				0x0022
-/* Address in PFOW where prog buffer can can be found */
-#define PFOW_PROGRAM_BUFFER_OFFSET		0x0040
-/* Size of program buffer in words */
-#define PFOW_PROGRAM_BUFFER_SIZE		0x0042
-/* Address command code register */
-#define PFOW_COMMAND_CODE			0x0080
-/* command data register */
-#define PFOW_COMMAND_DATA			0x0084
-/* command address register lower address bits */
-#define PFOW_COMMAND_ADDRESS_L			0x0088
-/* command address register upper address bits */
-#define PFOW_COMMAND_ADDRESS_H			0x008a
-/* number of bytes to be proggrammed lower address bits */
-#define PFOW_DATA_COUNT_L			0x0090
-/* number of bytes to be proggrammed higher address bits */
-#define PFOW_DATA_COUNT_H			0x0092
-/* command execution register, the only possible value is 0x01 */
-#define PFOW_COMMAND_EXECUTE			0x00c0
-/* 0x01 should be written at this address to clear buffer */
-#define PFOW_CLEAR_PROGRAM_BUFFER		0x00c4
-/* device program/erase suspend register */
-#define PFOW_PROGRAM_ERASE_SUSPEND		0x00c8
-/* device status register */
-#define PFOW_DSR				0x00cc
-
-/* LPDDR memory device command codes */
-/* They are possible values of PFOW command code register */
-#define LPDDR_WORD_PROGRAM		0x0041
-#define LPDDR_BUFF_PROGRAM		0x00E9
-#define LPDDR_BLOCK_ERASE		0x0020
-#define LPDDR_LOCK_BLOCK		0x0061
-#define LPDDR_UNLOCK_BLOCK		0x0062
-#define LPDDR_READ_BLOCK_LOCK_STATUS	0x0065
-#define LPDDR_INFO_QUERY		0x0098
-#define LPDDR_READ_OTP			0x0097
-#define LPDDR_PROG_OTP			0x00C0
-#define LPDDR_RESUME			0x00D0
-
-/* Defines possible value of PFOW command execution register */
-#define LPDDR_START_EXECUTION			0x0001
-
-/* Defines possible value of PFOW program/erase suspend register */
-#define LPDDR_SUSPEND				0x0001
-
-/* Possible values of PFOW device status register */
-/* access R - read; RC read & clearable */
-#define DSR_DPS			(1<<1) /* RC; device protect status
-					* 0 - not protected 1 - locked */
-#define DSR_PSS			(1<<2) /* R; program suspend status;
-					* 0-prog in progress/completed,
-					* 1- prog suspended */
-#define DSR_VPPS		(1<<3) /* RC; 0-Vpp OK, * 1-Vpp low */
-#define DSR_PROGRAM_STATUS	(1<<4) /* RC; 0-successful, 1-error */
-#define DSR_ERASE_STATUS	(1<<5) /* RC; erase or blank check status;
-					* 0-success erase/blank check,
-					* 1 blank check error */
-#define DSR_ESS			(1<<6) /* R; erase suspend status;
-					* 0-erase in progress/complete,
-					* 1 erase suspended */
-#define DSR_READY_STATUS	(1<<7) /* R; Device status
-					* 0-busy,
-					* 1-ready */
-#define DSR_RPS			(0x3<<8) /* RC;  region program status
-					* 00 - Success,
-					* 01-re-program attempt in region with
-					* object mode data,
-					* 10-object mode program w attempt in
-					* region with control mode data
-					* 11-attempt to program invalid half
-					* with 0x41 command */
-#define DSR_AOS			(1<<12) /* RC; 1- AO related failure */
-#define DSR_AVAILABLE		(1<<15) /* R; Device availbility
-					* 1 - Device available
-					* 0 - not available */
-
-/* The superset of all possible error bits in DSR */
-#define DSR_ERR			0x133A
-
-static inline void send_pfow_command(struct map_info *map,
-				unsigned long cmd_code, unsigned long adr,
-				unsigned long len, map_word *datum)
-{
-	int bits_per_chip = map_bankwidth(map) * 8;
-	int chipnum;
-	struct lpddr_private *lpddr = map->fldrv_priv;
-	chipnum = adr >> lpddr->chipshift;
-
-	map_write(map, CMD(cmd_code), map->pfow_base + PFOW_COMMAND_CODE);
-	map_write(map, CMD(adr & ((1<<bits_per_chip) - 1)),
-				map->pfow_base + PFOW_COMMAND_ADDRESS_L);
-	map_write(map, CMD(adr>>bits_per_chip),
-				map->pfow_base + PFOW_COMMAND_ADDRESS_H);
-	if (len) {
-		map_write(map, CMD(len & ((1<<bits_per_chip) - 1)),
-					map->pfow_base + PFOW_DATA_COUNT_L);
-		map_write(map, CMD(len>>bits_per_chip),
-					map->pfow_base + PFOW_DATA_COUNT_H);
-	}
-	if (datum)
-		map_write(map, *datum, map->pfow_base + PFOW_COMMAND_DATA);
-
-	/* Command execution start */
-	map_write(map, CMD(LPDDR_START_EXECUTION),
-			map->pfow_base + PFOW_COMMAND_EXECUTE);
-}
-
-static inline void print_drs_error(unsigned dsr)
-{
-	int prog_status = (dsr & DSR_RPS) >> 8;
-
-	if (!(dsr & DSR_AVAILABLE))
-		printk(KERN_NOTICE"DSR.15: (0) Device not Available\n");
-	if (prog_status & 0x03)
-		printk(KERN_NOTICE"DSR.9,8: (11) Attempt to program invalid "
-						"half with 41h command\n");
-	else if (prog_status & 0x02)
-		printk(KERN_NOTICE"DSR.9,8: (10) Object Mode Program attempt "
-					"in region with Control Mode data\n");
-	else if (prog_status &  0x01)
-		printk(KERN_NOTICE"DSR.9,8: (01) Program attempt in region "
-						"with Object Mode data\n");
-	if (!(dsr & DSR_READY_STATUS))
-		printk(KERN_NOTICE"DSR.7: (0) Device is Busy\n");
-	if (dsr & DSR_ESS)
-		printk(KERN_NOTICE"DSR.6: (1) Erase Suspended\n");
-	if (dsr & DSR_ERASE_STATUS)
-		printk(KERN_NOTICE"DSR.5: (1) Erase/Blank check error\n");
-	if (dsr & DSR_PROGRAM_STATUS)
-		printk(KERN_NOTICE"DSR.4: (1) Program Error\n");
-	if (dsr & DSR_VPPS)
-		printk(KERN_NOTICE"DSR.3: (1) Vpp low detect, operation "
-					"aborted\n");
-	if (dsr & DSR_PSS)
-		printk(KERN_NOTICE"DSR.2: (1) Program suspended\n");
-	if (dsr & DSR_DPS)
-		printk(KERN_NOTICE"DSR.1: (1) Aborted Erase/Program attempt "
-					"on locked block\n");
-}
-#endif /* __LINUX_MTD_PFOW_H */
diff --git a/ANDROID_3.4.5/include/linux/mtd/physmap.h b/ANDROID_3.4.5/include/linux/mtd/physmap.h
deleted file mode 100644
index d2887e76..00000000
--- a/ANDROID_3.4.5/include/linux/mtd/physmap.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * For boards with physically mapped flash and using
- * drivers/mtd/maps/physmap.c mapping driver.
- *
- * Copyright (C) 2003 MontaVista Software Inc.
- * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-
-#ifndef __LINUX_MTD_PHYSMAP__
-#define __LINUX_MTD_PHYSMAP__
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-
-struct map_info;
-struct platform_device;
-
-struct physmap_flash_data {
-	unsigned int		width;
-	int			(*init)(struct platform_device *);
-	void			(*exit)(struct platform_device *);
-	void			(*set_vpp)(struct platform_device *, int);
-	unsigned int		nr_parts;
-	unsigned int		pfow_base;
-	char                    *probe_type;
-	struct mtd_partition	*parts;
-	const char		**part_probe_types;
-};
-
-#endif /* __LINUX_MTD_PHYSMAP__ */
diff --git a/ANDROID_3.4.5/include/linux/mtd/pismo.h b/ANDROID_3.4.5/include/linux/mtd/pismo.h
deleted file mode 100644
index 8dfb7e14..00000000
--- a/ANDROID_3.4.5/include/linux/mtd/pismo.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * PISMO memory driver - http://www.pismoworld.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License.
- */
-#ifndef __LINUX_MTD_PISMO_H
-#define __LINUX_MTD_PISMO_H
-
-struct pismo_pdata {
-	void			(*set_vpp)(void *, int);
-	void			*vpp_data;
-	phys_addr_t		cs_addrs[5];
-};
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/mtd/plat-ram.h b/ANDROID_3.4.5/include/linux/mtd/plat-ram.h
deleted file mode 100644
index e07890af..00000000
--- a/ANDROID_3.4.5/include/linux/mtd/plat-ram.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/* linux/include/linux/mtd/plat-ram.h
- *
- * (c) 2004 Simtec Electronics
- *	http://www.simtec.co.uk/products/SWLINUX/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Generic platform device based RAM map
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#ifndef __LINUX_MTD_PLATRAM_H
-#define __LINUX_MTD_PLATRAM_H __FILE__
-
-#define PLATRAM_RO (0)
-#define PLATRAM_RW (1)
-
-struct platdata_mtd_ram {
-	const char		*mapname;
-	const char		**map_probes;
-	const char		**probes;
-	struct mtd_partition	*partitions;
-	int			 nr_partitions;
-	int			 bankwidth;
-
-	/* control callbacks */
-
-	void	(*set_rw)(struct device *dev, int to);
-};
-
-#endif /* __LINUX_MTD_PLATRAM_H */
diff --git a/ANDROID_3.4.5/include/linux/mtd/qinfo.h b/ANDROID_3.4.5/include/linux/mtd/qinfo.h
deleted file mode 100644
index 7b3d487d..00000000
--- a/ANDROID_3.4.5/include/linux/mtd/qinfo.h
+++ /dev/null
@@ -1,91 +0,0 @@
-#ifndef __LINUX_MTD_QINFO_H
-#define __LINUX_MTD_QINFO_H
-
-#include <linux/mtd/map.h>
-#include <linux/wait.h>
-#include <linux/spinlock.h>
-#include <linux/delay.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/flashchip.h>
-#include <linux/mtd/partitions.h>
-
-/* lpddr_private describes lpddr flash chip in memory map
- * @ManufactId - Chip Manufacture ID
- * @DevId - Chip Device ID
- * @qinfo - pointer to qinfo records describing the chip
- * @numchips - number of chips including virual RWW partitions
- * @chipshift - Chip/partiton size 2^chipshift
- * @chips - per-chip data structure
- */
-struct lpddr_private {
-	uint16_t ManufactId;
-	uint16_t DevId;
-	struct qinfo_chip *qinfo;
-	int numchips;
-	unsigned long chipshift;
-	struct flchip chips[0];
-};
-
-/* qinfo_query_info structure contains request information for
- * each qinfo record
- * @major - major number of qinfo record
- * @major - minor number of qinfo record
- * @id_str - descriptive string to access the record
- * @desc - detailed description for the qinfo record
- */
-struct qinfo_query_info {
-	uint8_t	major;
-	uint8_t	minor;
-	char *id_str;
-	char *desc;
-};
-
-/*
- * qinfo_chip structure contains necessary qinfo records data
- * @DevSizeShift - Device size 2^n bytes
- * @BufSizeShift - Program buffer size 2^n bytes
- * @TotalBlocksNum - Total number of blocks
- * @UniformBlockSizeShift - Uniform block size 2^UniformBlockSizeShift bytes
- * @HWPartsNum - Number of hardware partitions
- * @SuspEraseSupp - Suspend erase supported
- * @SingleWordProgTime - Single word program 2^SingleWordProgTime u-sec
- * @ProgBufferTime - Program buffer write 2^ProgBufferTime u-sec
- * @BlockEraseTime - Block erase 2^BlockEraseTime m-sec
- */
-struct qinfo_chip {
-	/* General device info */
-	uint16_t DevSizeShift;
-	uint16_t BufSizeShift;
-	/* Erase block information */
-	uint16_t TotalBlocksNum;
-	uint16_t UniformBlockSizeShift;
-	/* Partition information */
-	uint16_t HWPartsNum;
-	/* Optional features */
-	uint16_t SuspEraseSupp;
-	/* Operation typical time */
-	uint16_t SingleWordProgTime;
-	uint16_t ProgBufferTime;
-	uint16_t BlockEraseTime;
-};
-
-/* defines for fixup usage */
-#define LPDDR_MFR_ANY		0xffff
-#define LPDDR_ID_ANY		0xffff
-#define NUMONYX_MFGR_ID		0x0089
-#define R18_DEVICE_ID_1G	0x893c
-
-static inline map_word lpddr_build_cmd(u_long cmd, struct map_info *map)
-{
-	map_word val = { {0} };
-	val.x[0] = cmd;
-	return val;
-}
-
-#define CMD(x) lpddr_build_cmd(x, map)
-#define CMDVAL(cmd) cmd.x[0]
-
-struct mtd_info *lpddr_cmdset(struct map_info *);
-
-#endif
-
diff --git a/ANDROID_3.4.5/include/linux/mtd/sh_flctl.h b/ANDROID_3.4.5/include/linux/mtd/sh_flctl.h
deleted file mode 100644
index a38e1fa8..00000000
--- a/ANDROID_3.4.5/include/linux/mtd/sh_flctl.h
+++ /dev/null
@@ -1,171 +0,0 @@
-/*
- * SuperH FLCTL nand controller
- *
- * Copyright © 2008 Renesas Solutions Corp.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-
-#ifndef __SH_FLCTL_H__
-#define __SH_FLCTL_H__
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/partitions.h>
-#include <linux/pm_qos.h>
-
-/* FLCTL registers */
-#define FLCMNCR(f)		(f->reg + 0x0)
-#define FLCMDCR(f)		(f->reg + 0x4)
-#define FLCMCDR(f)		(f->reg + 0x8)
-#define FLADR(f)		(f->reg + 0xC)
-#define FLADR2(f)		(f->reg + 0x3C)
-#define FLDATAR(f)		(f->reg + 0x10)
-#define FLDTCNTR(f)		(f->reg + 0x14)
-#define FLINTDMACR(f)		(f->reg + 0x18)
-#define FLBSYTMR(f)		(f->reg + 0x1C)
-#define FLBSYCNT(f)		(f->reg + 0x20)
-#define FLDTFIFO(f)		(f->reg + 0x24)
-#define FLECFIFO(f)		(f->reg + 0x28)
-#define FLTRCR(f)		(f->reg + 0x2C)
-#define FLHOLDCR(f)		(f->reg + 0x38)
-#define	FL4ECCRESULT0(f)	(f->reg + 0x80)
-#define	FL4ECCRESULT1(f)	(f->reg + 0x84)
-#define	FL4ECCRESULT2(f)	(f->reg + 0x88)
-#define	FL4ECCRESULT3(f)	(f->reg + 0x8C)
-#define	FL4ECCCR(f)		(f->reg + 0x90)
-#define	FL4ECCCNT(f)		(f->reg + 0x94)
-#define	FLERRADR(f)		(f->reg + 0x98)
-
-/* FLCMNCR control bits */
-#define ECCPOS2		(0x1 << 25)
-#define _4ECCCNTEN	(0x1 << 24)
-#define _4ECCEN		(0x1 << 23)
-#define _4ECCCORRECT	(0x1 << 22)
-#define SHBUSSEL	(0x1 << 20)
-#define SEL_16BIT	(0x1 << 19)
-#define SNAND_E		(0x1 << 18)	/* SNAND (0=512 1=2048)*/
-#define QTSEL_E		(0x1 << 17)
-#define ENDIAN		(0x1 << 16)	/* 1 = little endian */
-#define FCKSEL_E	(0x1 << 15)
-#define ECCPOS_00	(0x00 << 12)
-#define ECCPOS_01	(0x01 << 12)
-#define ECCPOS_02	(0x02 << 12)
-#define ACM_SACCES_MODE	(0x01 << 10)
-#define NANWF_E		(0x1 << 9)
-#define SE_D		(0x1 << 8)	/* Spare area disable */
-#define	CE1_ENABLE	(0x1 << 4)	/* Chip Enable 1 */
-#define	CE0_ENABLE	(0x1 << 3)	/* Chip Enable 0 */
-#define	TYPESEL_SET	(0x1 << 0)
-
-/*
- * Clock settings using the PULSEx registers from FLCMNCR
- *
- * Some hardware uses bits called PULSEx instead of FCKSEL_E and QTSEL_E
- * to control the clock divider used between the High-Speed Peripheral Clock
- * and the FLCTL internal clock. If so, use CLK_8_BIT_xxx for connecting 8 bit
- * and CLK_16_BIT_xxx for connecting 16 bit bus bandwith NAND chips. For the 16
- * bit version the divider is seperate for the pulse width of high and low
- * signals.
- */
-#define PULSE3	(0x1 << 27)
-#define PULSE2	(0x1 << 17)
-#define PULSE1	(0x1 << 15)
-#define PULSE0	(0x1 << 9)
-#define CLK_8B_0_5			PULSE1
-#define CLK_8B_1			0x0
-#define CLK_8B_1_5			(PULSE1 | PULSE2)
-#define CLK_8B_2			PULSE0
-#define CLK_8B_3			(PULSE0 | PULSE1 | PULSE2)
-#define CLK_8B_4			(PULSE0 | PULSE2)
-#define CLK_16B_6L_2H			PULSE0
-#define CLK_16B_9L_3H			(PULSE0 | PULSE1 | PULSE2)
-#define CLK_16B_12L_4H			(PULSE0 | PULSE2)
-
-/* FLCMDCR control bits */
-#define ADRCNT2_E	(0x1 << 31)	/* 5byte address enable */
-#define ADRMD_E		(0x1 << 26)	/* Sector address access */
-#define CDSRC_E		(0x1 << 25)	/* Data buffer selection */
-#define DOSR_E		(0x1 << 24)	/* Status read check */
-#define SELRW		(0x1 << 21)	/*  0:read 1:write */
-#define DOADR_E		(0x1 << 20)	/* Address stage execute */
-#define ADRCNT_1	(0x00 << 18)	/* Address data bytes: 1byte */
-#define ADRCNT_2	(0x01 << 18)	/* Address data bytes: 2byte */
-#define ADRCNT_3	(0x02 << 18)	/* Address data bytes: 3byte */
-#define ADRCNT_4	(0x03 << 18)	/* Address data bytes: 4byte */
-#define DOCMD2_E	(0x1 << 17)	/* 2nd cmd stage execute */
-#define DOCMD1_E	(0x1 << 16)	/* 1st cmd stage execute */
-
-/* FLTRCR control bits */
-#define TRSTRT		(0x1 << 0)	/* translation start */
-#define TREND		(0x1 << 1)	/* translation end */
-
-/*
- * FLHOLDCR control bits
- *
- * HOLDEN: Bus Occupancy Enable (inverted)
- * Enable this bit when the external bus might be used in between transfers.
- * If not set and the bus gets used by other modules, a deadlock occurs.
- */
-#define HOLDEN		(0x1 << 0)
-
-/* FL4ECCCR control bits */
-#define	_4ECCFA		(0x1 << 2)	/* 4 symbols correct fault */
-#define	_4ECCEND	(0x1 << 1)	/* 4 symbols end */
-#define	_4ECCEXST	(0x1 << 0)	/* 4 symbols exist */
-
-#define INIT_FL4ECCRESULT_VAL	0x03FF03FF
-#define LOOP_TIMEOUT_MAX	0x00010000
-
-struct sh_flctl {
-	struct mtd_info		mtd;
-	struct nand_chip	chip;
-	struct platform_device	*pdev;
-	struct dev_pm_qos_request pm_qos;
-	void __iomem		*reg;
-
-	uint8_t	done_buff[2048 + 64];	/* max size 2048 + 64 */
-	int	read_bytes;
-	int	index;
-	int	seqin_column;		/* column in SEQIN cmd */
-	int	seqin_page_addr;	/* page_addr in SEQIN cmd */
-	uint32_t seqin_read_cmd;		/* read cmd in SEQIN cmd */
-	int	erase1_page_addr;	/* page_addr in ERASE1 cmd */
-	uint32_t erase_ADRCNT;		/* bits of FLCMDCR in ERASE1 cmd */
-	uint32_t rw_ADRCNT;	/* bits of FLCMDCR in READ WRITE cmd */
-	uint32_t flcmncr_base;	/* base value of FLCMNCR */
-
-	int	hwecc_cant_correct[4];
-
-	unsigned page_size:1;	/* NAND page size (0 = 512, 1 = 2048) */
-	unsigned hwecc:1;	/* Hardware ECC (0 = disabled, 1 = enabled) */
-	unsigned holden:1;	/* Hardware has FLHOLDCR and HOLDEN is set */
-	unsigned qos_request:1;	/* QoS request to prevent deep power shutdown */
-};
-
-struct sh_flctl_platform_data {
-	struct mtd_partition	*parts;
-	int			nr_parts;
-	unsigned long		flcmncr_val;
-
-	unsigned has_hwecc:1;
-	unsigned use_holden:1;
-};
-
-static inline struct sh_flctl *mtd_to_flctl(struct mtd_info *mtdinfo)
-{
-	return container_of(mtdinfo, struct sh_flctl, mtd);
-}
-
-#endif	/* __SH_FLCTL_H__ */
diff --git a/ANDROID_3.4.5/include/linux/mtd/sharpsl.h b/ANDROID_3.4.5/include/linux/mtd/sharpsl.h
deleted file mode 100644
index 25f4d2a8..00000000
--- a/ANDROID_3.4.5/include/linux/mtd/sharpsl.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * SharpSL NAND support
- *
- * Copyright (C) 2008 Dmitry Baryshkov
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/mtd/nand.h>
-#include <linux/mtd/nand_ecc.h>
-#include <linux/mtd/partitions.h>
-
-struct sharpsl_nand_platform_data {
-	struct nand_bbt_descr	*badblock_pattern;
-	struct nand_ecclayout	*ecc_layout;
-	struct mtd_partition	*partitions;
-	unsigned int		nr_partitions;
-};
diff --git a/ANDROID_3.4.5/include/linux/mtd/spear_smi.h b/ANDROID_3.4.5/include/linux/mtd/spear_smi.h
deleted file mode 100644
index 8ae17260..00000000
--- a/ANDROID_3.4.5/include/linux/mtd/spear_smi.h
+++ /dev/null
@@ -1,65 +0,0 @@
-/*
- * Copyright © 2010 ST Microelectronics
- * Shiraz Hashim <shiraz.hashim@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __MTD_SPEAR_SMI_H
-#define __MTD_SPEAR_SMI_H
-
-#include <linux/types.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/platform_device.h>
-#include <linux/of.h>
-
-/* max possible slots for serial-nor flash chip in the SMI controller */
-#define MAX_NUM_FLASH_CHIP	4
-
-/* macro to define partitions for flash devices */
-#define DEFINE_PARTS(n, of, s)		\
-{					\
-	.name = n,			\
-	.offset = of,			\
-	.size = s,			\
-}
-
-/**
- * struct spear_smi_flash_info - platform structure for passing flash
- * information
- *
- * name: name of the serial nor flash for identification
- * mem_base: the memory base on which the flash is mapped
- * size: size of the flash in bytes
- * partitions: parition details
- * nr_partitions: number of partitions
- * fast_mode: whether flash supports fast mode
- */
-
-struct spear_smi_flash_info {
-	char *name;
-	unsigned long mem_base;
-	unsigned long size;
-	struct mtd_partition *partitions;
-	int nr_partitions;
-	u8 fast_mode;
-};
-
-/**
- * struct spear_smi_plat_data - platform structure for configuring smi
- *
- * clk_rate: clk rate at which SMI must operate
- * num_flashes: number of flashes present on board
- * board_flash_info: specific details of each flash present on board
- */
-struct spear_smi_plat_data {
-	unsigned long clk_rate;
-	int num_flashes;
-	struct spear_smi_flash_info *board_flash_info;
-	struct device_node *np[MAX_NUM_FLASH_CHIP];
-};
-
-#endif /* __MTD_SPEAR_SMI_H */
diff --git a/ANDROID_3.4.5/include/linux/mtd/super.h b/ANDROID_3.4.5/include/linux/mtd/super.h
deleted file mode 100644
index f456230f..00000000
--- a/ANDROID_3.4.5/include/linux/mtd/super.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/* MTD-based superblock handling
- *
- * Copyright © 2006 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#ifndef __MTD_SUPER_H__
-#define __MTD_SUPER_H__
-
-#ifdef __KERNEL__
-
-#include <linux/mtd/mtd.h>
-#include <linux/fs.h>
-#include <linux/mount.h>
-
-extern struct dentry *mount_mtd(struct file_system_type *fs_type, int flags,
-		      const char *dev_name, void *data,
-		      int (*fill_super)(struct super_block *, void *, int));
-extern void kill_mtd_super(struct super_block *sb);
-
-
-#endif /* __KERNEL__ */
-
-#endif /* __MTD_SUPER_H__ */
diff --git a/ANDROID_3.4.5/include/linux/mtd/ubi.h b/ANDROID_3.4.5/include/linux/mtd/ubi.h
deleted file mode 100644
index c2e92b36..00000000
--- a/ANDROID_3.4.5/include/linux/mtd/ubi.h
+++ /dev/null
@@ -1,265 +0,0 @@
-/*
- * Copyright (c) International Business Machines Corp., 2006
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- * Author: Artem Bityutskiy (Битюцкий Артём)
- */
-
-#ifndef __LINUX_UBI_H__
-#define __LINUX_UBI_H__
-
-#include <linux/ioctl.h>
-#include <linux/types.h>
-#include <mtd/ubi-user.h>
-
-
-#define UBI_ALL -1
-/*
- * enum ubi_open_mode - UBI volume open mode constants.
- *
- * UBI_READONLY: read-only mode
- * UBI_READWRITE: read-write mode
- * UBI_EXCLUSIVE: exclusive mode
- */
-enum {
-	UBI_READONLY = 1,
-	UBI_READWRITE,
-	UBI_EXCLUSIVE
-};
-
-/**
- * struct ubi_volume_info - UBI volume description data structure.
- * @vol_id: volume ID
- * @ubi_num: UBI device number this volume belongs to
- * @size: how many physical eraseblocks are reserved for this volume
- * @used_bytes: how many bytes of data this volume contains
- * @used_ebs: how many physical eraseblocks of this volume actually contain any
- *            data
- * @vol_type: volume type (%UBI_DYNAMIC_VOLUME or %UBI_STATIC_VOLUME)
- * @corrupted: non-zero if the volume is corrupted (static volumes only)
- * @upd_marker: non-zero if the volume has update marker set
- * @alignment: volume alignment
- * @usable_leb_size: how many bytes are available in logical eraseblocks of
- *                   this volume
- * @name_len: volume name length
- * @name: volume name
- * @cdev: UBI volume character device major and minor numbers
- *
- * The @corrupted flag is only relevant to static volumes and is always zero
- * for dynamic ones. This is because UBI does not care about dynamic volume
- * data protection and only cares about protecting static volume data.
- *
- * The @upd_marker flag is set if the volume update operation was interrupted.
- * Before touching the volume data during the update operation, UBI first sets
- * the update marker flag for this volume. If the volume update operation was
- * further interrupted, the update marker indicates this. If the update marker
- * is set, the contents of the volume is certainly damaged and a new volume
- * update operation has to be started.
- *
- * To put it differently, @corrupted and @upd_marker fields have different
- * semantics:
- *     o the @corrupted flag means that this static volume is corrupted for some
- *       reasons, but not because an interrupted volume update
- *     o the @upd_marker field means that the volume is damaged because of an
- *       interrupted update operation.
- *
- * I.e., the @corrupted flag is never set if the @upd_marker flag is set.
- *
- * The @used_bytes and @used_ebs fields are only really needed for static
- * volumes and contain the number of bytes stored in this static volume and how
- * many eraseblock this data occupies. In case of dynamic volumes, the
- * @used_bytes field is equivalent to @size*@usable_leb_size, and the @used_ebs
- * field is equivalent to @size.
- *
- * In general, logical eraseblock size is a property of the UBI device, not
- * of the UBI volume. Indeed, the logical eraseblock size depends on the
- * physical eraseblock size and on how much bytes UBI headers consume. But
- * because of the volume alignment (@alignment), the usable size of logical
- * eraseblocks if a volume may be less. The following equation is true:
- *	@usable_leb_size = LEB size - (LEB size mod @alignment),
- * where LEB size is the logical eraseblock size defined by the UBI device.
- *
- * The alignment is multiple to the minimal flash input/output unit size or %1
- * if all the available space is used.
- *
- * To put this differently, alignment may be considered is a way to change
- * volume logical eraseblock sizes.
- */
-struct ubi_volume_info {
-	int ubi_num;
-	int vol_id;
-	int size;
-	long long used_bytes;
-	int used_ebs;
-	int vol_type;
-	int corrupted;
-	int upd_marker;
-	int alignment;
-	int usable_leb_size;
-	int name_len;
-	const char *name;
-	dev_t cdev;
-};
-
-/**
- * struct ubi_device_info - UBI device description data structure.
- * @ubi_num: ubi device number
- * @leb_size: logical eraseblock size on this UBI device
- * @leb_start: starting offset of logical eraseblocks within physical
- *             eraseblocks
- * @min_io_size: minimal I/O unit size
- * @max_write_size: maximum amount of bytes the underlying flash can write at a
- *                  time (MTD write buffer size)
- * @ro_mode: if this device is in read-only mode
- * @cdev: UBI character device major and minor numbers
- *
- * Note, @leb_size is the logical eraseblock size offered by the UBI device.
- * Volumes of this UBI device may have smaller logical eraseblock size if their
- * alignment is not equivalent to %1.
- *
- * The @max_write_size field describes flash write maximum write unit. For
- * example, NOR flash allows for changing individual bytes, so @min_io_size is
- * %1. However, it does not mean than NOR flash has to write data byte-by-byte.
- * Instead, CFI NOR flashes have a write-buffer of, e.g., 64 bytes, and when
- * writing large chunks of data, they write 64-bytes at a time. Obviously, this
- * improves write throughput.
- *
- * Also, the MTD device may have N interleaved (striped) flash chips
- * underneath, in which case @min_io_size can be physical min. I/O size of
- * single flash chip, while @max_write_size can be N * @min_io_size.
- *
- * The @max_write_size field is always greater or equivalent to @min_io_size.
- * E.g., some NOR flashes may have (@min_io_size = 1, @max_write_size = 64). In
- * contrast, NAND flashes usually have @min_io_size = @max_write_size = NAND
- * page size.
- */
-struct ubi_device_info {
-	int ubi_num;
-	int leb_size;
-	int leb_start;
-	int min_io_size;
-	int max_write_size;
-	int ro_mode;
-	dev_t cdev;
-};
-
-/*
- * Volume notification types.
- * @UBI_VOLUME_ADDED: a volume has been added (an UBI device was attached or a
- *                    volume was created)
- * @UBI_VOLUME_REMOVED: a volume has been removed (an UBI device was detached
- *			or a volume was removed)
- * @UBI_VOLUME_RESIZED: a volume has been re-sized
- * @UBI_VOLUME_RENAMED: a volume has been re-named
- * @UBI_VOLUME_UPDATED: data has been written to a volume
- *
- * These constants define which type of event has happened when a volume
- * notification function is invoked.
- */
-enum {
-	UBI_VOLUME_ADDED,
-	UBI_VOLUME_REMOVED,
-	UBI_VOLUME_RESIZED,
-	UBI_VOLUME_RENAMED,
-	UBI_VOLUME_UPDATED,
-};
-
-/*
- * struct ubi_notification - UBI notification description structure.
- * @di: UBI device description object
- * @vi: UBI volume description object
- *
- * UBI notifiers are called with a pointer to an object of this type. The
- * object describes the notification. Namely, it provides a description of the
- * UBI device and UBI volume the notification informs about.
- */
-struct ubi_notification {
-	struct ubi_device_info di;
-	struct ubi_volume_info vi;
-};
-
-/* UBI descriptor given to users when they open UBI volumes */
-struct ubi_volume_desc;
-
-int ubi_get_device_info(int ubi_num, struct ubi_device_info *di);
-void ubi_get_volume_info(struct ubi_volume_desc *desc,
-			 struct ubi_volume_info *vi);
-struct ubi_volume_desc *ubi_open_volume(int ubi_num, int vol_id, int mode);
-struct ubi_volume_desc *ubi_open_volume_nm(int ubi_num, const char *name,
-					   int mode);
-
-void ubi_update_volume(struct ubi_volume_desc *desc);
-
-struct ubi_volume_desc *ubi_open_volume_path(const char *pathname, int mode);
-
-int ubi_register_volume_notifier(struct notifier_block *nb,
-				 int ignore_existing);
-int ubi_unregister_volume_notifier(struct notifier_block *nb);
-
-void ubi_close_volume(struct ubi_volume_desc *desc);
-void ubi_set_volume(struct ubi_volume_desc *desc);
-
-int ubi_leb_read(struct ubi_volume_desc *desc, int lnum, char *buf, int offset,
-		 int len, int check);
-int ubi_leb_write(struct ubi_volume_desc *desc, int lnum, const void *buf,
-		  int offset, int len);
-
-int ubi_leb_read_oob(struct ubi_volume_desc *desc, int lnum, void *buf, int offset,
-		int len, void *spare);
-
-int ubi_leb_write_oob(struct ubi_volume_desc *desc, int lnum, const void *buf, int offset, 
-		int len, void *spare, int dtype);
-
-int ubi_leb_change(struct ubi_volume_desc *desc, int lnum, const void *buf,
-		   int len);
-int ubi_leb_erase(struct ubi_volume_desc *desc, int lnum);
-int ubi_leb_unmap(struct ubi_volume_desc *desc, int lnum);
-int ubi_leb_map(struct ubi_volume_desc *desc, int lnum);
-int ubi_is_mapped(struct ubi_volume_desc *desc, int lnum);
-int ubi_sync(int ubi_num);
-int ubi_flush(int ubi_num, int vol_id, int lnum);
-
-/*
- * This function is the same as the 'ubi_leb_read()' function, but it does not
- * provide the checking capability.
- */
-static inline int ubi_read(struct ubi_volume_desc *desc, int lnum, char *buf,
-			   int offset, int len)
-{
-	return ubi_leb_read(desc, lnum, buf, offset, len, 0);
-}
-
-/*
- * This function is the same as the 'ubi_leb_write()' functions, but it does
- * not have the data type argument.
- */
-static inline int ubi_write(struct ubi_volume_desc *desc, int lnum,
-			    const void *buf, int offset, int len)
-{
-	return ubi_leb_write(desc, lnum, buf, offset, len);
-}
-
-/*
- * This function is the same as the 'ubi_leb_change()' functions, but it does
- * not have the data type argument.
- */
-static inline int ubi_change(struct ubi_volume_desc *desc, int lnum,
-				    const void *buf, int len)
-{
-	return ubi_leb_change(desc, lnum, buf, len);
-}
-
-#endif /* !__LINUX_UBI_H__ */
diff --git a/ANDROID_3.4.5/include/linux/mtd/xip.h b/ANDROID_3.4.5/include/linux/mtd/xip.h
deleted file mode 100644
index abed4dec..00000000
--- a/ANDROID_3.4.5/include/linux/mtd/xip.h
+++ /dev/null
@@ -1,99 +0,0 @@
-/*
- * MTD primitives for XIP support
- *
- * Author:	Nicolas Pitre
- * Created:	Nov 2, 2004
- * Copyright:	(C) 2004 MontaVista Software, Inc.
- *
- * This XIP support for MTD has been loosely inspired
- * by an earlier patch authored by David Woodhouse.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __LINUX_MTD_XIP_H__
-#define __LINUX_MTD_XIP_H__
-
-
-#ifdef CONFIG_MTD_XIP
-
-/*
- * We really don't want gcc to guess anything.
- * We absolutely _need_ proper inlining.
- */
-#include <linux/compiler.h>
-
-/*
- * Function that are modifying the flash state away from array mode must
- * obviously not be running from flash.  The __xipram is therefore marking
- * those functions so they get relocated to ram.
- */
-#define __xipram noinline __attribute__ ((__section__ (".data")))
-
-/*
- * Each architecture has to provide the following macros.  They must access
- * the hardware directly and not rely on any other (XIP) functions since they
- * won't be available when used (flash not in array mode).
- *
- * xip_irqpending()
- *
- * 	return non zero when any hardware interrupt is pending.
- *
- * xip_currtime()
- *
- * 	return a platform specific time reference to be used with
- * 	xip_elapsed_since().
- *
- * xip_elapsed_since(x)
- *
- * 	return in usecs the elapsed timebetween now and the reference x as
- * 	returned by xip_currtime().
- *
- * 	note 1: conversion to usec can be approximated, as long as the
- * 		returned value is <= the real elapsed time.
- * 	note 2: this should be able to cope with a few seconds without
- * 		overflowing.
- *
- * xip_iprefetch()
- *
- *      Macro to fill instruction prefetch
- *	e.g. a series of nops:  asm volatile (".rep 8; nop; .endr");
- */
-
-#include <asm/mtd-xip.h>
-
-#ifndef xip_irqpending
-
-#warning "missing IRQ and timer primitives for XIP MTD support"
-#warning "some of the XIP MTD support code will be disabled"
-#warning "your system will therefore be unresponsive when writing or erasing flash"
-
-#define xip_irqpending()	(0)
-#define xip_currtime()		(0)
-#define xip_elapsed_since(x)	(0)
-
-#endif
-
-#ifndef xip_iprefetch
-#define xip_iprefetch()		do { } while (0)
-#endif
-
-/*
- * xip_cpu_idle() is used when waiting for a delay equal or larger than
- * the system timer tick period.  This should put the CPU into idle mode
- * to save power and to be woken up only when some interrupts are pending.
- * This should not rely upon standard kernel code.
- */
-#ifndef xip_cpu_idle
-#define xip_cpu_idle()  do { } while (0)
-#endif
-
-#else
-
-#define __xipram
-
-#endif /* CONFIG_MTD_XIP */
-
-#endif /* __LINUX_MTD_XIP_H__ */
diff --git a/ANDROID_3.4.5/include/linux/mtio.h b/ANDROID_3.4.5/include/linux/mtio.h
deleted file mode 100644
index 18543e2d..00000000
--- a/ANDROID_3.4.5/include/linux/mtio.h
+++ /dev/null
@@ -1,208 +0,0 @@
-/* 
- * linux/mtio.h header file for Linux. Written by H. Bergman
- *
- * Modified for special ioctls provided by zftape in September 1997
- * by C.-J. Heine.
- */
-
-#ifndef _LINUX_MTIO_H
-#define _LINUX_MTIO_H
-
-#include <linux/types.h>
-#include <linux/ioctl.h>
-
-/*
- * Structures and definitions for mag tape io control commands
- */
-
-/* structure for MTIOCTOP - mag tape op command */
-struct	mtop {
-	short	mt_op;		/* operations defined below */
-	int	mt_count;	/* how many of them */
-};
-
-/* Magnetic Tape operations [Not all operations supported by all drivers]: */
-#define MTRESET 0	/* +reset drive in case of problems */
-#define MTFSF	1	/* forward space over FileMark,
-			 * position at first record of next file 
-			 */
-#define MTBSF	2	/* backward space FileMark (position before FM) */
-#define MTFSR	3	/* forward space record */
-#define MTBSR	4	/* backward space record */
-#define MTWEOF	5	/* write an end-of-file record (mark) */
-#define MTREW	6	/* rewind */
-#define MTOFFL	7	/* rewind and put the drive offline (eject?) */
-#define MTNOP	8	/* no op, set status only (read with MTIOCGET) */
-#define MTRETEN 9	/* retension tape */
-#define MTBSFM	10	/* +backward space FileMark, position at FM */
-#define MTFSFM  11	/* +forward space FileMark, position at FM */
-#define MTEOM	12	/* goto end of recorded media (for appending files).
-			 * MTEOM positions after the last FM, ready for
-			 * appending another file.
-			 */
-#define MTERASE 13	/* erase tape -- be careful! */
-
-#define MTRAS1  14	/* run self test 1 (nondestructive) */
-#define MTRAS2	15	/* run self test 2 (destructive) */
-#define MTRAS3  16	/* reserved for self test 3 */
-
-#define MTSETBLK 20	/* set block length (SCSI) */
-#define MTSETDENSITY 21	/* set tape density (SCSI) */
-#define MTSEEK	22	/* seek to block (Tandberg, etc.) */
-#define MTTELL	23	/* tell block (Tandberg, etc.) */
-#define MTSETDRVBUFFER 24 /* set the drive buffering according to SCSI-2 */
-			/* ordinary buffered operation with code 1 */
-#define MTFSS	25	/* space forward over setmarks */
-#define MTBSS	26	/* space backward over setmarks */
-#define MTWSM	27	/* write setmarks */
-
-#define MTLOCK  28	/* lock the drive door */
-#define MTUNLOCK 29	/* unlock the drive door */
-#define MTLOAD  30	/* execute the SCSI load command */
-#define MTUNLOAD 31	/* execute the SCSI unload command */
-#define MTCOMPRESSION 32/* control compression with SCSI mode page 15 */
-#define MTSETPART 33	/* Change the active tape partition */
-#define MTMKPART  34	/* Format the tape with one or two partitions */
-#define MTWEOFI	35	/* write an end-of-file record (mark) in immediate mode */
-
-/* structure for MTIOCGET - mag tape get status command */
-
-struct	mtget {
-	long	mt_type;	/* type of magtape device */
-	long	mt_resid;	/* residual count: (not sure)
-				 *	number of bytes ignored, or
-				 *	number of files not skipped, or
-				 *	number of records not skipped.
-				 */
-	/* the following registers are device dependent */
-	long	mt_dsreg;	/* status register */
-	long	mt_gstat;	/* generic (device independent) status */
-	long	mt_erreg;	/* error register */
-	/* The next two fields are not always used */
-	__kernel_daddr_t mt_fileno;	/* number of current file on tape */
-	__kernel_daddr_t mt_blkno;	/* current block number */
-};
-
-
-
-/*
- * Constants for mt_type. Not all of these are supported,
- * and these are not all of the ones that are supported.
- */
-#define MT_ISUNKNOWN		0x01
-#define MT_ISQIC02		0x02	/* Generic QIC-02 tape streamer */
-#define MT_ISWT5150		0x03	/* Wangtek 5150EQ, QIC-150, QIC-02 */
-#define MT_ISARCHIVE_5945L2	0x04	/* Archive 5945L-2, QIC-24, QIC-02? */
-#define MT_ISCMSJ500		0x05	/* CMS Jumbo 500 (QIC-02?) */
-#define MT_ISTDC3610		0x06	/* Tandberg 6310, QIC-24 */
-#define MT_ISARCHIVE_VP60I	0x07	/* Archive VP60i, QIC-02 */
-#define MT_ISARCHIVE_2150L	0x08	/* Archive Viper 2150L */
-#define MT_ISARCHIVE_2060L	0x09	/* Archive Viper 2060L */
-#define MT_ISARCHIVESC499	0x0A	/* Archive SC-499 QIC-36 controller */
-#define MT_ISQIC02_ALL_FEATURES	0x0F	/* Generic QIC-02 with all features */
-#define MT_ISWT5099EEN24	0x11	/* Wangtek 5099-een24, 60MB, QIC-24 */
-#define MT_ISTEAC_MT2ST		0x12	/* Teac MT-2ST 155mb drive, Teac DC-1 card (Wangtek type) */
-#define MT_ISEVEREX_FT40A	0x32	/* Everex FT40A (QIC-40) */
-#define MT_ISDDS1		0x51	/* DDS device without partitions */
-#define MT_ISDDS2		0x52	/* DDS device with partitions */
-#define MT_ISONSTREAM_SC        0x61   /* OnStream SCSI tape drives (SC-x0)
-					  and SCSI emulated (DI, DP, USB) */
-#define MT_ISSCSI1		0x71	/* Generic ANSI SCSI-1 tape unit */
-#define MT_ISSCSI2		0x72	/* Generic ANSI SCSI-2 tape unit */
-
-/* QIC-40/80/3010/3020 ftape supported drives.
- * 20bit vendor ID + 0x800000 (see ftape-vendors.h)
- */
-#define MT_ISFTAPE_UNKNOWN	0x800000 /* obsolete */
-#define MT_ISFTAPE_FLAG	0x800000
-
-
-/* structure for MTIOCPOS - mag tape get position command */
-
-struct	mtpos {
-	long 	mt_blkno;	/* current block number */
-};
-
-
-/* mag tape io control commands */
-#define	MTIOCTOP	_IOW('m', 1, struct mtop)	/* do a mag tape op */
-#define	MTIOCGET	_IOR('m', 2, struct mtget)	/* get tape status */
-#define	MTIOCPOS	_IOR('m', 3, struct mtpos)	/* get tape position */
-
-
-/* Generic Mag Tape (device independent) status macros for examining
- * mt_gstat -- HP-UX compatible.
- * There is room for more generic status bits here, but I don't
- * know which of them are reserved. At least three or so should
- * be added to make this really useful.
- */
-#define GMT_EOF(x)              ((x) & 0x80000000)
-#define GMT_BOT(x)              ((x) & 0x40000000)
-#define GMT_EOT(x)              ((x) & 0x20000000)
-#define GMT_SM(x)               ((x) & 0x10000000)  /* DDS setmark */
-#define GMT_EOD(x)              ((x) & 0x08000000)  /* DDS EOD */
-#define GMT_WR_PROT(x)          ((x) & 0x04000000)
-/* #define GMT_ ? 		((x) & 0x02000000) */
-#define GMT_ONLINE(x)           ((x) & 0x01000000)
-#define GMT_D_6250(x)           ((x) & 0x00800000)
-#define GMT_D_1600(x)           ((x) & 0x00400000)
-#define GMT_D_800(x)            ((x) & 0x00200000)
-/* #define GMT_ ? 		((x) & 0x00100000) */
-/* #define GMT_ ? 		((x) & 0x00080000) */
-#define GMT_DR_OPEN(x)          ((x) & 0x00040000)  /* door open (no tape) */
-/* #define GMT_ ? 		((x) & 0x00020000) */
-#define GMT_IM_REP_EN(x)        ((x) & 0x00010000)  /* immediate report mode */
-#define GMT_CLN(x)              ((x) & 0x00008000)  /* cleaning requested */
-/* 15 generic status bits unused */
-
-
-/* SCSI-tape specific definitions */
-/* Bitfield shifts in the status  */
-#define MT_ST_BLKSIZE_SHIFT	0
-#define MT_ST_BLKSIZE_MASK	0xffffff
-#define MT_ST_DENSITY_SHIFT	24
-#define MT_ST_DENSITY_MASK	0xff000000
-
-#define MT_ST_SOFTERR_SHIFT	0
-#define MT_ST_SOFTERR_MASK	0xffff
-
-/* Bitfields for the MTSETDRVBUFFER ioctl */
-#define MT_ST_OPTIONS		0xf0000000
-#define MT_ST_BOOLEANS		0x10000000
-#define MT_ST_SETBOOLEANS	0x30000000
-#define MT_ST_CLEARBOOLEANS	0x40000000
-#define MT_ST_WRITE_THRESHOLD	0x20000000
-#define MT_ST_DEF_BLKSIZE	0x50000000
-#define MT_ST_DEF_OPTIONS	0x60000000
-#define MT_ST_TIMEOUTS		0x70000000
-#define MT_ST_SET_TIMEOUT	(MT_ST_TIMEOUTS | 0x000000)
-#define MT_ST_SET_LONG_TIMEOUT	(MT_ST_TIMEOUTS | 0x100000)
-#define MT_ST_SET_CLN		0x80000000
-
-#define MT_ST_BUFFER_WRITES	0x1
-#define MT_ST_ASYNC_WRITES	0x2
-#define MT_ST_READ_AHEAD	0x4
-#define MT_ST_DEBUGGING		0x8
-#define MT_ST_TWO_FM		0x10
-#define MT_ST_FAST_MTEOM	0x20
-#define MT_ST_AUTO_LOCK		0x40
-#define MT_ST_DEF_WRITES	0x80
-#define MT_ST_CAN_BSR		0x100
-#define MT_ST_NO_BLKLIMS	0x200
-#define MT_ST_CAN_PARTITIONS    0x400
-#define MT_ST_SCSI2LOGICAL      0x800
-#define MT_ST_SYSV              0x1000
-#define MT_ST_NOWAIT            0x2000
-#define MT_ST_SILI		0x4000
-#define MT_ST_NOWAIT_EOF	0x8000
-
-/* The mode parameters to be controlled. Parameter chosen with bits 20-28 */
-#define MT_ST_CLEAR_DEFAULT	0xfffff
-#define MT_ST_DEF_DENSITY	(MT_ST_DEF_OPTIONS | 0x100000)
-#define MT_ST_DEF_COMPRESSION	(MT_ST_DEF_OPTIONS | 0x200000)
-#define MT_ST_DEF_DRVBUFFER	(MT_ST_DEF_OPTIONS | 0x300000)
-
-/* The offset for the arguments for the special HP changer load command. */
-#define MT_ST_HPLOADER_OFFSET 10000
-
-#endif /* _LINUX_MTIO_H */
diff --git a/ANDROID_3.4.5/include/linux/mutex-debug.h b/ANDROID_3.4.5/include/linux/mutex-debug.h
deleted file mode 100644
index 731d77d6..00000000
--- a/ANDROID_3.4.5/include/linux/mutex-debug.h
+++ /dev/null
@@ -1,23 +0,0 @@
-#ifndef __LINUX_MUTEX_DEBUG_H
-#define __LINUX_MUTEX_DEBUG_H
-
-#include <linux/linkage.h>
-#include <linux/lockdep.h>
-
-/*
- * Mutexes - debugging helpers:
- */
-
-#define __DEBUG_MUTEX_INITIALIZER(lockname)				\
-	, .magic = &lockname
-
-#define mutex_init(mutex)						\
-do {									\
-	static struct lock_class_key __key;				\
-									\
-	__mutex_init((mutex), #mutex, &__key);				\
-} while (0)
-
-extern void mutex_destroy(struct mutex *lock);
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/mutex.h b/ANDROID_3.4.5/include/linux/mutex.h
deleted file mode 100644
index 9121595a..00000000
--- a/ANDROID_3.4.5/include/linux/mutex.h
+++ /dev/null
@@ -1,176 +0,0 @@
-/*
- * Mutexes: blocking mutual exclusion locks
- *
- * started by Ingo Molnar:
- *
- *  Copyright (C) 2004, 2005, 2006 Red Hat, Inc., Ingo Molnar <mingo@redhat.com>
- *
- * This file contains the main data structure and API definitions.
- */
-#ifndef __LINUX_MUTEX_H
-#define __LINUX_MUTEX_H
-
-#include <linux/list.h>
-#include <linux/spinlock_types.h>
-#include <linux/linkage.h>
-#include <linux/lockdep.h>
-
-#include <linux/atomic.h>
-
-/*
- * Simple, straightforward mutexes with strict semantics:
- *
- * - only one task can hold the mutex at a time
- * - only the owner can unlock the mutex
- * - multiple unlocks are not permitted
- * - recursive locking is not permitted
- * - a mutex object must be initialized via the API
- * - a mutex object must not be initialized via memset or copying
- * - task may not exit with mutex held
- * - memory areas where held locks reside must not be freed
- * - held mutexes must not be reinitialized
- * - mutexes may not be used in hardware or software interrupt
- *   contexts such as tasklets and timers
- *
- * These semantics are fully enforced when DEBUG_MUTEXES is
- * enabled. Furthermore, besides enforcing the above rules, the mutex
- * debugging code also implements a number of additional features
- * that make lock debugging easier and faster:
- *
- * - uses symbolic names of mutexes, whenever they are printed in debug output
- * - point-of-acquire tracking, symbolic lookup of function names
- * - list of all locks held in the system, printout of them
- * - owner tracking
- * - detects self-recursing locks and prints out all relevant info
- * - detects multi-task circular deadlocks and prints out all affected
- *   locks and tasks (and only those tasks)
- */
-struct mutex {
-	/* 1: unlocked, 0: locked, negative: locked, possible waiters */
-	atomic_t		count;
-	spinlock_t		wait_lock;
-	struct list_head	wait_list;
-#if defined(CONFIG_DEBUG_MUTEXES) || defined(CONFIG_SMP)
-	struct task_struct	*owner;
-#endif
-#ifdef CONFIG_DEBUG_MUTEXES
-	const char 		*name;
-	void			*magic;
-#endif
-#ifdef CONFIG_DEBUG_LOCK_ALLOC
-	struct lockdep_map	dep_map;
-#endif
-};
-
-/*
- * This is the control structure for tasks blocked on mutex,
- * which resides on the blocked task's kernel stack:
- */
-struct mutex_waiter {
-	struct list_head	list;
-	struct task_struct	*task;
-#ifdef CONFIG_DEBUG_MUTEXES
-	void			*magic;
-#endif
-};
-
-#ifdef CONFIG_DEBUG_MUTEXES
-# include <linux/mutex-debug.h>
-#else
-# define __DEBUG_MUTEX_INITIALIZER(lockname)
-/**
- * mutex_init - initialize the mutex
- * @mutex: the mutex to be initialized
- *
- * Initialize the mutex to unlocked state.
- *
- * It is not allowed to initialize an already locked mutex.
- */
-# define mutex_init(mutex) \
-do {							\
-	static struct lock_class_key __key;		\
-							\
-	__mutex_init((mutex), #mutex, &__key);		\
-} while (0)
-static inline void mutex_destroy(struct mutex *lock) {}
-#endif
-
-#ifdef CONFIG_DEBUG_LOCK_ALLOC
-# define __DEP_MAP_MUTEX_INITIALIZER(lockname) \
-		, .dep_map = { .name = #lockname }
-#else
-# define __DEP_MAP_MUTEX_INITIALIZER(lockname)
-#endif
-
-#define __MUTEX_INITIALIZER(lockname) \
-		{ .count = ATOMIC_INIT(1) \
-		, .wait_lock = __SPIN_LOCK_UNLOCKED(lockname.wait_lock) \
-		, .wait_list = LIST_HEAD_INIT(lockname.wait_list) \
-		__DEBUG_MUTEX_INITIALIZER(lockname) \
-		__DEP_MAP_MUTEX_INITIALIZER(lockname) }
-
-#define DEFINE_MUTEX(mutexname) \
-	struct mutex mutexname = __MUTEX_INITIALIZER(mutexname)
-
-extern void __mutex_init(struct mutex *lock, const char *name,
-			 struct lock_class_key *key);
-
-/**
- * mutex_is_locked - is the mutex locked
- * @lock: the mutex to be queried
- *
- * Returns 1 if the mutex is locked, 0 if unlocked.
- */
-static inline int mutex_is_locked(struct mutex *lock)
-{
-	return atomic_read(&lock->count) != 1;
-}
-
-/*
- * See kernel/mutex.c for detailed documentation of these APIs.
- * Also see Documentation/mutex-design.txt.
- */
-#ifdef CONFIG_DEBUG_LOCK_ALLOC
-extern void mutex_lock_nested(struct mutex *lock, unsigned int subclass);
-extern void _mutex_lock_nest_lock(struct mutex *lock, struct lockdep_map *nest_lock);
-extern int __must_check mutex_lock_interruptible_nested(struct mutex *lock,
-					unsigned int subclass);
-extern int __must_check mutex_lock_killable_nested(struct mutex *lock,
-					unsigned int subclass);
-
-#define mutex_lock(lock) mutex_lock_nested(lock, 0)
-#define mutex_lock_interruptible(lock) mutex_lock_interruptible_nested(lock, 0)
-#define mutex_lock_killable(lock) mutex_lock_killable_nested(lock, 0)
-
-#define mutex_lock_nest_lock(lock, nest_lock)				\
-do {									\
-	typecheck(struct lockdep_map *, &(nest_lock)->dep_map);		\
-	_mutex_lock_nest_lock(lock, &(nest_lock)->dep_map);		\
-} while (0)
-
-#else
-extern void mutex_lock(struct mutex *lock);
-extern int __must_check mutex_lock_interruptible(struct mutex *lock);
-extern int __must_check mutex_lock_killable(struct mutex *lock);
-
-# define mutex_lock_nested(lock, subclass) mutex_lock(lock)
-# define mutex_lock_interruptible_nested(lock, subclass) mutex_lock_interruptible(lock)
-# define mutex_lock_killable_nested(lock, subclass) mutex_lock_killable(lock)
-# define mutex_lock_nest_lock(lock, nest_lock) mutex_lock(lock)
-#endif
-
-/*
- * NOTE: mutex_trylock() follows the spin_trylock() convention,
- *       not the down_trylock() convention!
- *
- * Returns 1 if the mutex has been acquired successfully, and 0 on contention.
- */
-extern int mutex_trylock(struct mutex *lock);
-extern void mutex_unlock(struct mutex *lock);
-extern int atomic_dec_and_mutex_lock(atomic_t *cnt, struct mutex *lock);
-
-#ifndef CONFIG_HAVE_ARCH_MUTEX_CPU_RELAX
-#define arch_mutex_cpu_relax()	cpu_relax()
-#endif
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/mv643xx.h b/ANDROID_3.4.5/include/linux/mv643xx.h
deleted file mode 100644
index 69327b7b..00000000
--- a/ANDROID_3.4.5/include/linux/mv643xx.h
+++ /dev/null
@@ -1,979 +0,0 @@
-/*
- * mv643xx.h - MV-643XX Internal registers definition file.
- *
- * Copyright 2002 Momentum Computer, Inc.
- * 	Author: Matthew Dharm <mdharm@momenco.com>
- * Copyright 2002 GALILEO TECHNOLOGY, LTD. 
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-#ifndef __ASM_MV643XX_H
-#define __ASM_MV643XX_H
-
-#include <asm/types.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/mv643xx_i2c.h>
-
-/****************************************/
-/* Processor Address Space              */
-/****************************************/
-
-/* DDR SDRAM BAR and size registers */
-
-#define MV64340_CS_0_BASE_ADDR                                      0x008
-#define MV64340_CS_0_SIZE                                           0x010
-#define MV64340_CS_1_BASE_ADDR                                      0x208
-#define MV64340_CS_1_SIZE                                           0x210
-#define MV64340_CS_2_BASE_ADDR                                      0x018
-#define MV64340_CS_2_SIZE                                           0x020
-#define MV64340_CS_3_BASE_ADDR                                      0x218
-#define MV64340_CS_3_SIZE                                           0x220
-
-/* Devices BAR and size registers */
-
-#define MV64340_DEV_CS0_BASE_ADDR                                   0x028
-#define MV64340_DEV_CS0_SIZE                                        0x030
-#define MV64340_DEV_CS1_BASE_ADDR                                   0x228
-#define MV64340_DEV_CS1_SIZE                                        0x230
-#define MV64340_DEV_CS2_BASE_ADDR                                   0x248
-#define MV64340_DEV_CS2_SIZE                                        0x250
-#define MV64340_DEV_CS3_BASE_ADDR                                   0x038
-#define MV64340_DEV_CS3_SIZE                                        0x040
-#define MV64340_BOOTCS_BASE_ADDR                                    0x238
-#define MV64340_BOOTCS_SIZE                                         0x240
-
-/* PCI 0 BAR and size registers */
-
-#define MV64340_PCI_0_IO_BASE_ADDR                                  0x048
-#define MV64340_PCI_0_IO_SIZE                                       0x050
-#define MV64340_PCI_0_MEMORY0_BASE_ADDR                             0x058
-#define MV64340_PCI_0_MEMORY0_SIZE                                  0x060
-#define MV64340_PCI_0_MEMORY1_BASE_ADDR                             0x080
-#define MV64340_PCI_0_MEMORY1_SIZE                                  0x088
-#define MV64340_PCI_0_MEMORY2_BASE_ADDR                             0x258
-#define MV64340_PCI_0_MEMORY2_SIZE                                  0x260
-#define MV64340_PCI_0_MEMORY3_BASE_ADDR                             0x280
-#define MV64340_PCI_0_MEMORY3_SIZE                                  0x288
-
-/* PCI 1 BAR and size registers */
-#define MV64340_PCI_1_IO_BASE_ADDR                                  0x090
-#define MV64340_PCI_1_IO_SIZE                                       0x098
-#define MV64340_PCI_1_MEMORY0_BASE_ADDR                             0x0a0
-#define MV64340_PCI_1_MEMORY0_SIZE                                  0x0a8
-#define MV64340_PCI_1_MEMORY1_BASE_ADDR                             0x0b0
-#define MV64340_PCI_1_MEMORY1_SIZE                                  0x0b8
-#define MV64340_PCI_1_MEMORY2_BASE_ADDR                             0x2a0
-#define MV64340_PCI_1_MEMORY2_SIZE                                  0x2a8
-#define MV64340_PCI_1_MEMORY3_BASE_ADDR                             0x2b0
-#define MV64340_PCI_1_MEMORY3_SIZE                                  0x2b8
-
-/* SRAM base address */
-#define MV64340_INTEGRATED_SRAM_BASE_ADDR                           0x268
-
-/* internal registers space base address */
-#define MV64340_INTERNAL_SPACE_BASE_ADDR                            0x068
-
-/* Enables the CS , DEV_CS , PCI 0 and PCI 1 
-   windows above */
-#define MV64340_BASE_ADDR_ENABLE                                    0x278
-
-/****************************************/
-/* PCI remap registers                  */
-/****************************************/
-      /* PCI 0 */
-#define MV64340_PCI_0_IO_ADDR_REMAP                                 0x0f0
-#define MV64340_PCI_0_MEMORY0_LOW_ADDR_REMAP                        0x0f8
-#define MV64340_PCI_0_MEMORY0_HIGH_ADDR_REMAP                       0x320
-#define MV64340_PCI_0_MEMORY1_LOW_ADDR_REMAP                        0x100
-#define MV64340_PCI_0_MEMORY1_HIGH_ADDR_REMAP                       0x328
-#define MV64340_PCI_0_MEMORY2_LOW_ADDR_REMAP                        0x2f8
-#define MV64340_PCI_0_MEMORY2_HIGH_ADDR_REMAP                       0x330
-#define MV64340_PCI_0_MEMORY3_LOW_ADDR_REMAP                        0x300
-#define MV64340_PCI_0_MEMORY3_HIGH_ADDR_REMAP                       0x338
-      /* PCI 1 */
-#define MV64340_PCI_1_IO_ADDR_REMAP                                 0x108
-#define MV64340_PCI_1_MEMORY0_LOW_ADDR_REMAP                        0x110
-#define MV64340_PCI_1_MEMORY0_HIGH_ADDR_REMAP                       0x340
-#define MV64340_PCI_1_MEMORY1_LOW_ADDR_REMAP                        0x118
-#define MV64340_PCI_1_MEMORY1_HIGH_ADDR_REMAP                       0x348
-#define MV64340_PCI_1_MEMORY2_LOW_ADDR_REMAP                        0x310
-#define MV64340_PCI_1_MEMORY2_HIGH_ADDR_REMAP                       0x350
-#define MV64340_PCI_1_MEMORY3_LOW_ADDR_REMAP                        0x318
-#define MV64340_PCI_1_MEMORY3_HIGH_ADDR_REMAP                       0x358
- 
-#define MV64340_CPU_PCI_0_HEADERS_RETARGET_CONTROL                  0x3b0
-#define MV64340_CPU_PCI_0_HEADERS_RETARGET_BASE                     0x3b8
-#define MV64340_CPU_PCI_1_HEADERS_RETARGET_CONTROL                  0x3c0
-#define MV64340_CPU_PCI_1_HEADERS_RETARGET_BASE                     0x3c8
-#define MV64340_CPU_GE_HEADERS_RETARGET_CONTROL                     0x3d0
-#define MV64340_CPU_GE_HEADERS_RETARGET_BASE                        0x3d8
-#define MV64340_CPU_IDMA_HEADERS_RETARGET_CONTROL                   0x3e0
-#define MV64340_CPU_IDMA_HEADERS_RETARGET_BASE                      0x3e8
-
-/****************************************/
-/*         CPU Control Registers        */
-/****************************************/
-
-#define MV64340_CPU_CONFIG                                          0x000
-#define MV64340_CPU_MODE                                            0x120
-#define MV64340_CPU_MASTER_CONTROL                                  0x160
-#define MV64340_CPU_CROSS_BAR_CONTROL_LOW                           0x150
-#define MV64340_CPU_CROSS_BAR_CONTROL_HIGH                          0x158
-#define MV64340_CPU_CROSS_BAR_TIMEOUT                               0x168
-
-/****************************************/
-/* SMP RegisterS                        */
-/****************************************/
-
-#define MV64340_SMP_WHO_AM_I                                        0x200
-#define MV64340_SMP_CPU0_DOORBELL                                   0x214
-#define MV64340_SMP_CPU0_DOORBELL_CLEAR                             0x21C
-#define MV64340_SMP_CPU1_DOORBELL                                   0x224
-#define MV64340_SMP_CPU1_DOORBELL_CLEAR                             0x22C
-#define MV64340_SMP_CPU0_DOORBELL_MASK                              0x234
-#define MV64340_SMP_CPU1_DOORBELL_MASK                              0x23C
-#define MV64340_SMP_SEMAPHOR0                                       0x244
-#define MV64340_SMP_SEMAPHOR1                                       0x24c
-#define MV64340_SMP_SEMAPHOR2                                       0x254
-#define MV64340_SMP_SEMAPHOR3                                       0x25c
-#define MV64340_SMP_SEMAPHOR4                                       0x264
-#define MV64340_SMP_SEMAPHOR5                                       0x26c
-#define MV64340_SMP_SEMAPHOR6                                       0x274
-#define MV64340_SMP_SEMAPHOR7                                       0x27c
-
-/****************************************/
-/*  CPU Sync Barrier Register           */
-/****************************************/
-
-#define MV64340_CPU_0_SYNC_BARRIER_TRIGGER                          0x0c0
-#define MV64340_CPU_0_SYNC_BARRIER_VIRTUAL                          0x0c8
-#define MV64340_CPU_1_SYNC_BARRIER_TRIGGER                          0x0d0
-#define MV64340_CPU_1_SYNC_BARRIER_VIRTUAL                          0x0d8
-
-/****************************************/
-/* CPU Access Protect                   */
-/****************************************/
-
-#define MV64340_CPU_PROTECT_WINDOW_0_BASE_ADDR                      0x180
-#define MV64340_CPU_PROTECT_WINDOW_0_SIZE                           0x188
-#define MV64340_CPU_PROTECT_WINDOW_1_BASE_ADDR                      0x190
-#define MV64340_CPU_PROTECT_WINDOW_1_SIZE                           0x198
-#define MV64340_CPU_PROTECT_WINDOW_2_BASE_ADDR                      0x1a0
-#define MV64340_CPU_PROTECT_WINDOW_2_SIZE                           0x1a8
-#define MV64340_CPU_PROTECT_WINDOW_3_BASE_ADDR                      0x1b0
-#define MV64340_CPU_PROTECT_WINDOW_3_SIZE                           0x1b8
-
-
-/****************************************/
-/*          CPU Error Report            */
-/****************************************/
-
-#define MV64340_CPU_ERROR_ADDR_LOW                                  0x070
-#define MV64340_CPU_ERROR_ADDR_HIGH                                 0x078
-#define MV64340_CPU_ERROR_DATA_LOW                                  0x128
-#define MV64340_CPU_ERROR_DATA_HIGH                                 0x130
-#define MV64340_CPU_ERROR_PARITY                                    0x138
-#define MV64340_CPU_ERROR_CAUSE                                     0x140
-#define MV64340_CPU_ERROR_MASK                                      0x148
-
-/****************************************/
-/*      CPU Interface Debug Registers 	*/
-/****************************************/
-
-#define MV64340_PUNIT_SLAVE_DEBUG_LOW                               0x360
-#define MV64340_PUNIT_SLAVE_DEBUG_HIGH                              0x368
-#define MV64340_PUNIT_MASTER_DEBUG_LOW                              0x370
-#define MV64340_PUNIT_MASTER_DEBUG_HIGH                             0x378
-#define MV64340_PUNIT_MMASK                                         0x3e4
-
-/****************************************/
-/*  Integrated SRAM Registers           */
-/****************************************/
-
-#define MV64340_SRAM_CONFIG                                         0x380
-#define MV64340_SRAM_TEST_MODE                                      0X3F4
-#define MV64340_SRAM_ERROR_CAUSE                                    0x388
-#define MV64340_SRAM_ERROR_ADDR                                     0x390
-#define MV64340_SRAM_ERROR_ADDR_HIGH                                0X3F8
-#define MV64340_SRAM_ERROR_DATA_LOW                                 0x398
-#define MV64340_SRAM_ERROR_DATA_HIGH                                0x3a0
-#define MV64340_SRAM_ERROR_DATA_PARITY                              0x3a8
-
-/****************************************/
-/* SDRAM Configuration                  */
-/****************************************/
-
-#define MV64340_SDRAM_CONFIG                                        0x1400
-#define MV64340_D_UNIT_CONTROL_LOW                                  0x1404
-#define MV64340_D_UNIT_CONTROL_HIGH                                 0x1424
-#define MV64340_SDRAM_TIMING_CONTROL_LOW                            0x1408
-#define MV64340_SDRAM_TIMING_CONTROL_HIGH                           0x140c
-#define MV64340_SDRAM_ADDR_CONTROL                                  0x1410
-#define MV64340_SDRAM_OPEN_PAGES_CONTROL                            0x1414
-#define MV64340_SDRAM_OPERATION                                     0x1418
-#define MV64340_SDRAM_MODE                                          0x141c
-#define MV64340_EXTENDED_DRAM_MODE                                  0x1420
-#define MV64340_SDRAM_CROSS_BAR_CONTROL_LOW                         0x1430
-#define MV64340_SDRAM_CROSS_BAR_CONTROL_HIGH                        0x1434
-#define MV64340_SDRAM_CROSS_BAR_TIMEOUT                             0x1438
-#define MV64340_SDRAM_ADDR_CTRL_PADS_CALIBRATION                    0x14c0
-#define MV64340_SDRAM_DATA_PADS_CALIBRATION                         0x14c4
-
-/****************************************/
-/* SDRAM Error Report                   */
-/****************************************/
-
-#define MV64340_SDRAM_ERROR_DATA_LOW                                0x1444
-#define MV64340_SDRAM_ERROR_DATA_HIGH                               0x1440
-#define MV64340_SDRAM_ERROR_ADDR                                    0x1450
-#define MV64340_SDRAM_RECEIVED_ECC                                  0x1448
-#define MV64340_SDRAM_CALCULATED_ECC                                0x144c
-#define MV64340_SDRAM_ECC_CONTROL                                   0x1454
-#define MV64340_SDRAM_ECC_ERROR_COUNTER                             0x1458
-
-/******************************************/
-/*  Controlled Delay Line (CDL) Registers */
-/******************************************/
-
-#define MV64340_DFCDL_CONFIG0                                       0x1480
-#define MV64340_DFCDL_CONFIG1                                       0x1484
-#define MV64340_DLL_WRITE                                           0x1488
-#define MV64340_DLL_READ                                            0x148c
-#define MV64340_SRAM_ADDR                                           0x1490
-#define MV64340_SRAM_DATA0                                          0x1494
-#define MV64340_SRAM_DATA1                                          0x1498
-#define MV64340_SRAM_DATA2                                          0x149c
-#define MV64340_DFCL_PROBE                                          0x14a0
-
-/******************************************/
-/*   Debug Registers                      */
-/******************************************/
-
-#define MV64340_DUNIT_DEBUG_LOW                                     0x1460
-#define MV64340_DUNIT_DEBUG_HIGH                                    0x1464
-#define MV64340_DUNIT_MMASK                                         0X1b40
-
-/****************************************/
-/* Device Parameters			*/
-/****************************************/
-
-#define MV64340_DEVICE_BANK0_PARAMETERS				    0x45c
-#define MV64340_DEVICE_BANK1_PARAMETERS				    0x460
-#define MV64340_DEVICE_BANK2_PARAMETERS				    0x464
-#define MV64340_DEVICE_BANK3_PARAMETERS				    0x468
-#define MV64340_DEVICE_BOOT_BANK_PARAMETERS			    0x46c
-#define MV64340_DEVICE_INTERFACE_CONTROL                            0x4c0
-#define MV64340_DEVICE_INTERFACE_CROSS_BAR_CONTROL_LOW              0x4c8
-#define MV64340_DEVICE_INTERFACE_CROSS_BAR_CONTROL_HIGH             0x4cc
-#define MV64340_DEVICE_INTERFACE_CROSS_BAR_TIMEOUT                  0x4c4
-
-/****************************************/
-/* Device interrupt registers		*/
-/****************************************/
-
-#define MV64340_DEVICE_INTERRUPT_CAUSE				    0x4d0
-#define MV64340_DEVICE_INTERRUPT_MASK				    0x4d4
-#define MV64340_DEVICE_ERROR_ADDR				    0x4d8
-#define MV64340_DEVICE_ERROR_DATA   				    0x4dc
-#define MV64340_DEVICE_ERROR_PARITY     			    0x4e0
-
-/****************************************/
-/* Device debug registers   		*/
-/****************************************/
-
-#define MV64340_DEVICE_DEBUG_LOW     				    0x4e4
-#define MV64340_DEVICE_DEBUG_HIGH     				    0x4e8
-#define MV64340_RUNIT_MMASK                                         0x4f0
-
-/****************************************/
-/* PCI Slave Address Decoding registers */
-/****************************************/
-
-#define MV64340_PCI_0_CS_0_BANK_SIZE                                0xc08
-#define MV64340_PCI_1_CS_0_BANK_SIZE                                0xc88
-#define MV64340_PCI_0_CS_1_BANK_SIZE                                0xd08
-#define MV64340_PCI_1_CS_1_BANK_SIZE                                0xd88
-#define MV64340_PCI_0_CS_2_BANK_SIZE                                0xc0c
-#define MV64340_PCI_1_CS_2_BANK_SIZE                                0xc8c
-#define MV64340_PCI_0_CS_3_BANK_SIZE                                0xd0c
-#define MV64340_PCI_1_CS_3_BANK_SIZE                                0xd8c
-#define MV64340_PCI_0_DEVCS_0_BANK_SIZE                             0xc10
-#define MV64340_PCI_1_DEVCS_0_BANK_SIZE                             0xc90
-#define MV64340_PCI_0_DEVCS_1_BANK_SIZE                             0xd10
-#define MV64340_PCI_1_DEVCS_1_BANK_SIZE                             0xd90
-#define MV64340_PCI_0_DEVCS_2_BANK_SIZE                             0xd18
-#define MV64340_PCI_1_DEVCS_2_BANK_SIZE                             0xd98
-#define MV64340_PCI_0_DEVCS_3_BANK_SIZE                             0xc14
-#define MV64340_PCI_1_DEVCS_3_BANK_SIZE                             0xc94
-#define MV64340_PCI_0_DEVCS_BOOT_BANK_SIZE                          0xd14
-#define MV64340_PCI_1_DEVCS_BOOT_BANK_SIZE                          0xd94
-#define MV64340_PCI_0_P2P_MEM0_BAR_SIZE                             0xd1c
-#define MV64340_PCI_1_P2P_MEM0_BAR_SIZE                             0xd9c
-#define MV64340_PCI_0_P2P_MEM1_BAR_SIZE                             0xd20
-#define MV64340_PCI_1_P2P_MEM1_BAR_SIZE                             0xda0
-#define MV64340_PCI_0_P2P_I_O_BAR_SIZE                              0xd24
-#define MV64340_PCI_1_P2P_I_O_BAR_SIZE                              0xda4
-#define MV64340_PCI_0_CPU_BAR_SIZE                                  0xd28
-#define MV64340_PCI_1_CPU_BAR_SIZE                                  0xda8
-#define MV64340_PCI_0_INTERNAL_SRAM_BAR_SIZE                        0xe00
-#define MV64340_PCI_1_INTERNAL_SRAM_BAR_SIZE                        0xe80
-#define MV64340_PCI_0_EXPANSION_ROM_BAR_SIZE                        0xd2c
-#define MV64340_PCI_1_EXPANSION_ROM_BAR_SIZE                        0xd9c
-#define MV64340_PCI_0_BASE_ADDR_REG_ENABLE                          0xc3c
-#define MV64340_PCI_1_BASE_ADDR_REG_ENABLE                          0xcbc
-#define MV64340_PCI_0_CS_0_BASE_ADDR_REMAP			    0xc48
-#define MV64340_PCI_1_CS_0_BASE_ADDR_REMAP			    0xcc8
-#define MV64340_PCI_0_CS_1_BASE_ADDR_REMAP			    0xd48
-#define MV64340_PCI_1_CS_1_BASE_ADDR_REMAP			    0xdc8
-#define MV64340_PCI_0_CS_2_BASE_ADDR_REMAP			    0xc4c
-#define MV64340_PCI_1_CS_2_BASE_ADDR_REMAP			    0xccc
-#define MV64340_PCI_0_CS_3_BASE_ADDR_REMAP			    0xd4c
-#define MV64340_PCI_1_CS_3_BASE_ADDR_REMAP			    0xdcc
-#define MV64340_PCI_0_CS_0_BASE_HIGH_ADDR_REMAP			    0xF04
-#define MV64340_PCI_1_CS_0_BASE_HIGH_ADDR_REMAP			    0xF84
-#define MV64340_PCI_0_CS_1_BASE_HIGH_ADDR_REMAP			    0xF08
-#define MV64340_PCI_1_CS_1_BASE_HIGH_ADDR_REMAP			    0xF88
-#define MV64340_PCI_0_CS_2_BASE_HIGH_ADDR_REMAP			    0xF0C
-#define MV64340_PCI_1_CS_2_BASE_HIGH_ADDR_REMAP			    0xF8C
-#define MV64340_PCI_0_CS_3_BASE_HIGH_ADDR_REMAP			    0xF10
-#define MV64340_PCI_1_CS_3_BASE_HIGH_ADDR_REMAP			    0xF90
-#define MV64340_PCI_0_DEVCS_0_BASE_ADDR_REMAP			    0xc50
-#define MV64340_PCI_1_DEVCS_0_BASE_ADDR_REMAP			    0xcd0
-#define MV64340_PCI_0_DEVCS_1_BASE_ADDR_REMAP			    0xd50
-#define MV64340_PCI_1_DEVCS_1_BASE_ADDR_REMAP			    0xdd0
-#define MV64340_PCI_0_DEVCS_2_BASE_ADDR_REMAP			    0xd58
-#define MV64340_PCI_1_DEVCS_2_BASE_ADDR_REMAP			    0xdd8
-#define MV64340_PCI_0_DEVCS_3_BASE_ADDR_REMAP           	    0xc54
-#define MV64340_PCI_1_DEVCS_3_BASE_ADDR_REMAP           	    0xcd4
-#define MV64340_PCI_0_DEVCS_BOOTCS_BASE_ADDR_REMAP      	    0xd54
-#define MV64340_PCI_1_DEVCS_BOOTCS_BASE_ADDR_REMAP      	    0xdd4
-#define MV64340_PCI_0_P2P_MEM0_BASE_ADDR_REMAP_LOW                  0xd5c
-#define MV64340_PCI_1_P2P_MEM0_BASE_ADDR_REMAP_LOW                  0xddc
-#define MV64340_PCI_0_P2P_MEM0_BASE_ADDR_REMAP_HIGH                 0xd60
-#define MV64340_PCI_1_P2P_MEM0_BASE_ADDR_REMAP_HIGH                 0xde0
-#define MV64340_PCI_0_P2P_MEM1_BASE_ADDR_REMAP_LOW                  0xd64
-#define MV64340_PCI_1_P2P_MEM1_BASE_ADDR_REMAP_LOW                  0xde4
-#define MV64340_PCI_0_P2P_MEM1_BASE_ADDR_REMAP_HIGH                 0xd68
-#define MV64340_PCI_1_P2P_MEM1_BASE_ADDR_REMAP_HIGH                 0xde8
-#define MV64340_PCI_0_P2P_I_O_BASE_ADDR_REMAP                       0xd6c
-#define MV64340_PCI_1_P2P_I_O_BASE_ADDR_REMAP                       0xdec 
-#define MV64340_PCI_0_CPU_BASE_ADDR_REMAP_LOW                       0xd70
-#define MV64340_PCI_1_CPU_BASE_ADDR_REMAP_LOW                       0xdf0
-#define MV64340_PCI_0_CPU_BASE_ADDR_REMAP_HIGH                      0xd74
-#define MV64340_PCI_1_CPU_BASE_ADDR_REMAP_HIGH                      0xdf4
-#define MV64340_PCI_0_INTEGRATED_SRAM_BASE_ADDR_REMAP               0xf00
-#define MV64340_PCI_1_INTEGRATED_SRAM_BASE_ADDR_REMAP               0xf80
-#define MV64340_PCI_0_EXPANSION_ROM_BASE_ADDR_REMAP                 0xf38
-#define MV64340_PCI_1_EXPANSION_ROM_BASE_ADDR_REMAP                 0xfb8
-#define MV64340_PCI_0_ADDR_DECODE_CONTROL                           0xd3c
-#define MV64340_PCI_1_ADDR_DECODE_CONTROL                           0xdbc
-#define MV64340_PCI_0_HEADERS_RETARGET_CONTROL                      0xF40
-#define MV64340_PCI_1_HEADERS_RETARGET_CONTROL                      0xFc0
-#define MV64340_PCI_0_HEADERS_RETARGET_BASE                         0xF44
-#define MV64340_PCI_1_HEADERS_RETARGET_BASE                         0xFc4
-#define MV64340_PCI_0_HEADERS_RETARGET_HIGH                         0xF48
-#define MV64340_PCI_1_HEADERS_RETARGET_HIGH                         0xFc8
-
-/***********************************/
-/*   PCI Control Register Map      */
-/***********************************/
-
-#define MV64340_PCI_0_DLL_STATUS_AND_COMMAND                        0x1d20
-#define MV64340_PCI_1_DLL_STATUS_AND_COMMAND                        0x1da0
-#define MV64340_PCI_0_MPP_PADS_DRIVE_CONTROL                        0x1d1C
-#define MV64340_PCI_1_MPP_PADS_DRIVE_CONTROL                        0x1d9C
-#define MV64340_PCI_0_COMMAND			         	    0xc00
-#define MV64340_PCI_1_COMMAND					    0xc80
-#define MV64340_PCI_0_MODE                                          0xd00
-#define MV64340_PCI_1_MODE                                          0xd80
-#define MV64340_PCI_0_RETRY	        	 		    0xc04
-#define MV64340_PCI_1_RETRY				            0xc84
-#define MV64340_PCI_0_READ_BUFFER_DISCARD_TIMER                     0xd04
-#define MV64340_PCI_1_READ_BUFFER_DISCARD_TIMER                     0xd84
-#define MV64340_PCI_0_MSI_TRIGGER_TIMER                             0xc38
-#define MV64340_PCI_1_MSI_TRIGGER_TIMER                             0xcb8
-#define MV64340_PCI_0_ARBITER_CONTROL                               0x1d00
-#define MV64340_PCI_1_ARBITER_CONTROL                               0x1d80
-#define MV64340_PCI_0_CROSS_BAR_CONTROL_LOW                         0x1d08
-#define MV64340_PCI_1_CROSS_BAR_CONTROL_LOW                         0x1d88
-#define MV64340_PCI_0_CROSS_BAR_CONTROL_HIGH                        0x1d0c
-#define MV64340_PCI_1_CROSS_BAR_CONTROL_HIGH                        0x1d8c
-#define MV64340_PCI_0_CROSS_BAR_TIMEOUT                             0x1d04
-#define MV64340_PCI_1_CROSS_BAR_TIMEOUT                             0x1d84
-#define MV64340_PCI_0_SYNC_BARRIER_TRIGGER_REG                      0x1D18
-#define MV64340_PCI_1_SYNC_BARRIER_TRIGGER_REG                      0x1D98
-#define MV64340_PCI_0_SYNC_BARRIER_VIRTUAL_REG                      0x1d10
-#define MV64340_PCI_1_SYNC_BARRIER_VIRTUAL_REG                      0x1d90
-#define MV64340_PCI_0_P2P_CONFIG                                    0x1d14
-#define MV64340_PCI_1_P2P_CONFIG                                    0x1d94
-
-#define MV64340_PCI_0_ACCESS_CONTROL_BASE_0_LOW                     0x1e00
-#define MV64340_PCI_0_ACCESS_CONTROL_BASE_0_HIGH                    0x1e04
-#define MV64340_PCI_0_ACCESS_CONTROL_SIZE_0                         0x1e08
-#define MV64340_PCI_0_ACCESS_CONTROL_BASE_1_LOW                     0x1e10
-#define MV64340_PCI_0_ACCESS_CONTROL_BASE_1_HIGH                    0x1e14
-#define MV64340_PCI_0_ACCESS_CONTROL_SIZE_1                         0x1e18
-#define MV64340_PCI_0_ACCESS_CONTROL_BASE_2_LOW                     0x1e20
-#define MV64340_PCI_0_ACCESS_CONTROL_BASE_2_HIGH                    0x1e24
-#define MV64340_PCI_0_ACCESS_CONTROL_SIZE_2                         0x1e28
-#define MV64340_PCI_0_ACCESS_CONTROL_BASE_3_LOW                     0x1e30
-#define MV64340_PCI_0_ACCESS_CONTROL_BASE_3_HIGH                    0x1e34
-#define MV64340_PCI_0_ACCESS_CONTROL_SIZE_3                         0x1e38
-#define MV64340_PCI_0_ACCESS_CONTROL_BASE_4_LOW                     0x1e40
-#define MV64340_PCI_0_ACCESS_CONTROL_BASE_4_HIGH                    0x1e44
-#define MV64340_PCI_0_ACCESS_CONTROL_SIZE_4                         0x1e48
-#define MV64340_PCI_0_ACCESS_CONTROL_BASE_5_LOW                     0x1e50
-#define MV64340_PCI_0_ACCESS_CONTROL_BASE_5_HIGH                    0x1e54
-#define MV64340_PCI_0_ACCESS_CONTROL_SIZE_5                         0x1e58
-
-#define MV64340_PCI_1_ACCESS_CONTROL_BASE_0_LOW                     0x1e80
-#define MV64340_PCI_1_ACCESS_CONTROL_BASE_0_HIGH                    0x1e84
-#define MV64340_PCI_1_ACCESS_CONTROL_SIZE_0                         0x1e88
-#define MV64340_PCI_1_ACCESS_CONTROL_BASE_1_LOW                     0x1e90
-#define MV64340_PCI_1_ACCESS_CONTROL_BASE_1_HIGH                    0x1e94
-#define MV64340_PCI_1_ACCESS_CONTROL_SIZE_1                         0x1e98
-#define MV64340_PCI_1_ACCESS_CONTROL_BASE_2_LOW                     0x1ea0
-#define MV64340_PCI_1_ACCESS_CONTROL_BASE_2_HIGH                    0x1ea4
-#define MV64340_PCI_1_ACCESS_CONTROL_SIZE_2                         0x1ea8
-#define MV64340_PCI_1_ACCESS_CONTROL_BASE_3_LOW                     0x1eb0
-#define MV64340_PCI_1_ACCESS_CONTROL_BASE_3_HIGH                    0x1eb4
-#define MV64340_PCI_1_ACCESS_CONTROL_SIZE_3                         0x1eb8
-#define MV64340_PCI_1_ACCESS_CONTROL_BASE_4_LOW                     0x1ec0
-#define MV64340_PCI_1_ACCESS_CONTROL_BASE_4_HIGH                    0x1ec4
-#define MV64340_PCI_1_ACCESS_CONTROL_SIZE_4                         0x1ec8
-#define MV64340_PCI_1_ACCESS_CONTROL_BASE_5_LOW                     0x1ed0
-#define MV64340_PCI_1_ACCESS_CONTROL_BASE_5_HIGH                    0x1ed4
-#define MV64340_PCI_1_ACCESS_CONTROL_SIZE_5                         0x1ed8
-
-/****************************************/
-/*   PCI Configuration Access Registers */
-/****************************************/
-
-#define MV64340_PCI_0_CONFIG_ADDR 				    0xcf8
-#define MV64340_PCI_0_CONFIG_DATA_VIRTUAL_REG                       0xcfc
-#define MV64340_PCI_1_CONFIG_ADDR 				    0xc78
-#define MV64340_PCI_1_CONFIG_DATA_VIRTUAL_REG                       0xc7c
-#define MV64340_PCI_0_INTERRUPT_ACKNOWLEDGE_VIRTUAL_REG	            0xc34
-#define MV64340_PCI_1_INTERRUPT_ACKNOWLEDGE_VIRTUAL_REG	            0xcb4
-
-/****************************************/
-/*   PCI Error Report Registers         */
-/****************************************/
-
-#define MV64340_PCI_0_SERR_MASK					    0xc28
-#define MV64340_PCI_1_SERR_MASK					    0xca8
-#define MV64340_PCI_0_ERROR_ADDR_LOW                                0x1d40
-#define MV64340_PCI_1_ERROR_ADDR_LOW                                0x1dc0
-#define MV64340_PCI_0_ERROR_ADDR_HIGH                               0x1d44
-#define MV64340_PCI_1_ERROR_ADDR_HIGH                               0x1dc4
-#define MV64340_PCI_0_ERROR_ATTRIBUTE                               0x1d48
-#define MV64340_PCI_1_ERROR_ATTRIBUTE                               0x1dc8
-#define MV64340_PCI_0_ERROR_COMMAND                                 0x1d50
-#define MV64340_PCI_1_ERROR_COMMAND                                 0x1dd0
-#define MV64340_PCI_0_ERROR_CAUSE                                   0x1d58
-#define MV64340_PCI_1_ERROR_CAUSE                                   0x1dd8
-#define MV64340_PCI_0_ERROR_MASK                                    0x1d5c
-#define MV64340_PCI_1_ERROR_MASK                                    0x1ddc
-
-/****************************************/
-/*   PCI Debug Registers                */
-/****************************************/
-
-#define MV64340_PCI_0_MMASK                                         0X1D24
-#define MV64340_PCI_1_MMASK                                         0X1DA4
-
-/*********************************************/
-/* PCI Configuration, Function 0, Registers  */
-/*********************************************/
-
-#define MV64340_PCI_DEVICE_AND_VENDOR_ID 			    0x000
-#define MV64340_PCI_STATUS_AND_COMMAND				    0x004
-#define MV64340_PCI_CLASS_CODE_AND_REVISION_ID			    0x008
-#define MV64340_PCI_BIST_HEADER_TYPE_LATENCY_TIMER_CACHE_LINE 	    0x00C
-
-#define MV64340_PCI_SCS_0_BASE_ADDR_LOW   	      		    0x010
-#define MV64340_PCI_SCS_0_BASE_ADDR_HIGH   		            0x014
-#define MV64340_PCI_SCS_1_BASE_ADDR_LOW  	     	            0x018
-#define MV64340_PCI_SCS_1_BASE_ADDR_HIGH 		            0x01C
-#define MV64340_PCI_INTERNAL_REG_MEM_MAPPED_BASE_ADDR_LOW      	    0x020
-#define MV64340_PCI_INTERNAL_REG_MEM_MAPPED_BASE_ADDR_HIGH     	    0x024
-#define MV64340_PCI_SUBSYSTEM_ID_AND_SUBSYSTEM_VENDOR_ID	    0x02c
-#define MV64340_PCI_EXPANSION_ROM_BASE_ADDR_REG	                    0x030
-#define MV64340_PCI_CAPABILTY_LIST_POINTER                          0x034
-#define MV64340_PCI_INTERRUPT_PIN_AND_LINE 			    0x03C
-       /* capability list */
-#define MV64340_PCI_POWER_MANAGEMENT_CAPABILITY                     0x040
-#define MV64340_PCI_POWER_MANAGEMENT_STATUS_AND_CONTROL             0x044
-#define MV64340_PCI_VPD_ADDR                                        0x048
-#define MV64340_PCI_VPD_DATA                                        0x04c
-#define MV64340_PCI_MSI_MESSAGE_CONTROL                             0x050
-#define MV64340_PCI_MSI_MESSAGE_ADDR                                0x054
-#define MV64340_PCI_MSI_MESSAGE_UPPER_ADDR                          0x058
-#define MV64340_PCI_MSI_MESSAGE_DATA                                0x05c
-#define MV64340_PCI_X_COMMAND                                       0x060
-#define MV64340_PCI_X_STATUS                                        0x064
-#define MV64340_PCI_COMPACT_PCI_HOT_SWAP                            0x068
-
-/***********************************************/
-/*   PCI Configuration, Function 1, Registers  */
-/***********************************************/
-
-#define MV64340_PCI_SCS_2_BASE_ADDR_LOW   			    0x110
-#define MV64340_PCI_SCS_2_BASE_ADDR_HIGH			    0x114
-#define MV64340_PCI_SCS_3_BASE_ADDR_LOW 			    0x118
-#define MV64340_PCI_SCS_3_BASE_ADDR_HIGH			    0x11c
-#define MV64340_PCI_INTERNAL_SRAM_BASE_ADDR_LOW          	    0x120
-#define MV64340_PCI_INTERNAL_SRAM_BASE_ADDR_HIGH         	    0x124
-
-/***********************************************/
-/*  PCI Configuration, Function 2, Registers   */
-/***********************************************/
-
-#define MV64340_PCI_DEVCS_0_BASE_ADDR_LOW	    		    0x210
-#define MV64340_PCI_DEVCS_0_BASE_ADDR_HIGH 			    0x214
-#define MV64340_PCI_DEVCS_1_BASE_ADDR_LOW 			    0x218
-#define MV64340_PCI_DEVCS_1_BASE_ADDR_HIGH      		    0x21c
-#define MV64340_PCI_DEVCS_2_BASE_ADDR_LOW 			    0x220
-#define MV64340_PCI_DEVCS_2_BASE_ADDR_HIGH      		    0x224
-
-/***********************************************/
-/*  PCI Configuration, Function 3, Registers   */
-/***********************************************/
-
-#define MV64340_PCI_DEVCS_3_BASE_ADDR_LOW	    		    0x310
-#define MV64340_PCI_DEVCS_3_BASE_ADDR_HIGH 			    0x314
-#define MV64340_PCI_BOOT_CS_BASE_ADDR_LOW			    0x318
-#define MV64340_PCI_BOOT_CS_BASE_ADDR_HIGH      		    0x31c
-#define MV64340_PCI_CPU_BASE_ADDR_LOW 				    0x220
-#define MV64340_PCI_CPU_BASE_ADDR_HIGH      			    0x224
-
-/***********************************************/
-/*  PCI Configuration, Function 4, Registers   */
-/***********************************************/
-
-#define MV64340_PCI_P2P_MEM0_BASE_ADDR_LOW  			    0x410
-#define MV64340_PCI_P2P_MEM0_BASE_ADDR_HIGH 			    0x414
-#define MV64340_PCI_P2P_MEM1_BASE_ADDR_LOW   			    0x418
-#define MV64340_PCI_P2P_MEM1_BASE_ADDR_HIGH 			    0x41c
-#define MV64340_PCI_P2P_I_O_BASE_ADDR                 	            0x420
-#define MV64340_PCI_INTERNAL_REGS_I_O_MAPPED_BASE_ADDR              0x424
-
-/****************************************/
-/* Messaging Unit Registers (I20)   	*/
-/****************************************/
-
-#define MV64340_I2O_INBOUND_MESSAGE_REG0_PCI_0_SIDE		    0x010
-#define MV64340_I2O_INBOUND_MESSAGE_REG1_PCI_0_SIDE  		    0x014
-#define MV64340_I2O_OUTBOUND_MESSAGE_REG0_PCI_0_SIDE 		    0x018
-#define MV64340_I2O_OUTBOUND_MESSAGE_REG1_PCI_0_SIDE  		    0x01C
-#define MV64340_I2O_INBOUND_DOORBELL_REG_PCI_0_SIDE  		    0x020
-#define MV64340_I2O_INBOUND_INTERRUPT_CAUSE_REG_PCI_0_SIDE          0x024
-#define MV64340_I2O_INBOUND_INTERRUPT_MASK_REG_PCI_0_SIDE	    0x028
-#define MV64340_I2O_OUTBOUND_DOORBELL_REG_PCI_0_SIDE 		    0x02C
-#define MV64340_I2O_OUTBOUND_INTERRUPT_CAUSE_REG_PCI_0_SIDE         0x030
-#define MV64340_I2O_OUTBOUND_INTERRUPT_MASK_REG_PCI_0_SIDE          0x034
-#define MV64340_I2O_INBOUND_QUEUE_PORT_VIRTUAL_REG_PCI_0_SIDE       0x040
-#define MV64340_I2O_OUTBOUND_QUEUE_PORT_VIRTUAL_REG_PCI_0_SIDE      0x044
-#define MV64340_I2O_QUEUE_CONTROL_REG_PCI_0_SIDE 		    0x050
-#define MV64340_I2O_QUEUE_BASE_ADDR_REG_PCI_0_SIDE 		    0x054
-#define MV64340_I2O_INBOUND_FREE_HEAD_POINTER_REG_PCI_0_SIDE        0x060
-#define MV64340_I2O_INBOUND_FREE_TAIL_POINTER_REG_PCI_0_SIDE        0x064
-#define MV64340_I2O_INBOUND_POST_HEAD_POINTER_REG_PCI_0_SIDE        0x068
-#define MV64340_I2O_INBOUND_POST_TAIL_POINTER_REG_PCI_0_SIDE        0x06C
-#define MV64340_I2O_OUTBOUND_FREE_HEAD_POINTER_REG_PCI_0_SIDE       0x070
-#define MV64340_I2O_OUTBOUND_FREE_TAIL_POINTER_REG_PCI_0_SIDE       0x074
-#define MV64340_I2O_OUTBOUND_POST_HEAD_POINTER_REG_PCI_0_SIDE       0x0F8
-#define MV64340_I2O_OUTBOUND_POST_TAIL_POINTER_REG_PCI_0_SIDE       0x0FC
-
-#define MV64340_I2O_INBOUND_MESSAGE_REG0_PCI_1_SIDE		    0x090
-#define MV64340_I2O_INBOUND_MESSAGE_REG1_PCI_1_SIDE  		    0x094
-#define MV64340_I2O_OUTBOUND_MESSAGE_REG0_PCI_1_SIDE 		    0x098
-#define MV64340_I2O_OUTBOUND_MESSAGE_REG1_PCI_1_SIDE  		    0x09C
-#define MV64340_I2O_INBOUND_DOORBELL_REG_PCI_1_SIDE  		    0x0A0
-#define MV64340_I2O_INBOUND_INTERRUPT_CAUSE_REG_PCI_1_SIDE          0x0A4
-#define MV64340_I2O_INBOUND_INTERRUPT_MASK_REG_PCI_1_SIDE	    0x0A8
-#define MV64340_I2O_OUTBOUND_DOORBELL_REG_PCI_1_SIDE 		    0x0AC
-#define MV64340_I2O_OUTBOUND_INTERRUPT_CAUSE_REG_PCI_1_SIDE         0x0B0
-#define MV64340_I2O_OUTBOUND_INTERRUPT_MASK_REG_PCI_1_SIDE          0x0B4
-#define MV64340_I2O_INBOUND_QUEUE_PORT_VIRTUAL_REG_PCI_1_SIDE       0x0C0
-#define MV64340_I2O_OUTBOUND_QUEUE_PORT_VIRTUAL_REG_PCI_1_SIDE      0x0C4
-#define MV64340_I2O_QUEUE_CONTROL_REG_PCI_1_SIDE 		    0x0D0
-#define MV64340_I2O_QUEUE_BASE_ADDR_REG_PCI_1_SIDE 		    0x0D4
-#define MV64340_I2O_INBOUND_FREE_HEAD_POINTER_REG_PCI_1_SIDE        0x0E0
-#define MV64340_I2O_INBOUND_FREE_TAIL_POINTER_REG_PCI_1_SIDE        0x0E4
-#define MV64340_I2O_INBOUND_POST_HEAD_POINTER_REG_PCI_1_SIDE        0x0E8
-#define MV64340_I2O_INBOUND_POST_TAIL_POINTER_REG_PCI_1_SIDE        0x0EC
-#define MV64340_I2O_OUTBOUND_FREE_HEAD_POINTER_REG_PCI_1_SIDE       0x0F0
-#define MV64340_I2O_OUTBOUND_FREE_TAIL_POINTER_REG_PCI_1_SIDE       0x0F4
-#define MV64340_I2O_OUTBOUND_POST_HEAD_POINTER_REG_PCI_1_SIDE       0x078
-#define MV64340_I2O_OUTBOUND_POST_TAIL_POINTER_REG_PCI_1_SIDE       0x07C
-
-#define MV64340_I2O_INBOUND_MESSAGE_REG0_CPU0_SIDE		    0x1C10
-#define MV64340_I2O_INBOUND_MESSAGE_REG1_CPU0_SIDE  		    0x1C14
-#define MV64340_I2O_OUTBOUND_MESSAGE_REG0_CPU0_SIDE 		    0x1C18
-#define MV64340_I2O_OUTBOUND_MESSAGE_REG1_CPU0_SIDE  		    0x1C1C
-#define MV64340_I2O_INBOUND_DOORBELL_REG_CPU0_SIDE  		    0x1C20
-#define MV64340_I2O_INBOUND_INTERRUPT_CAUSE_REG_CPU0_SIDE  	    0x1C24
-#define MV64340_I2O_INBOUND_INTERRUPT_MASK_REG_CPU0_SIDE	    0x1C28
-#define MV64340_I2O_OUTBOUND_DOORBELL_REG_CPU0_SIDE 		    0x1C2C
-#define MV64340_I2O_OUTBOUND_INTERRUPT_CAUSE_REG_CPU0_SIDE          0x1C30
-#define MV64340_I2O_OUTBOUND_INTERRUPT_MASK_REG_CPU0_SIDE           0x1C34
-#define MV64340_I2O_INBOUND_QUEUE_PORT_VIRTUAL_REG_CPU0_SIDE        0x1C40
-#define MV64340_I2O_OUTBOUND_QUEUE_PORT_VIRTUAL_REG_CPU0_SIDE       0x1C44
-#define MV64340_I2O_QUEUE_CONTROL_REG_CPU0_SIDE 		    0x1C50
-#define MV64340_I2O_QUEUE_BASE_ADDR_REG_CPU0_SIDE 		    0x1C54
-#define MV64340_I2O_INBOUND_FREE_HEAD_POINTER_REG_CPU0_SIDE         0x1C60
-#define MV64340_I2O_INBOUND_FREE_TAIL_POINTER_REG_CPU0_SIDE         0x1C64
-#define MV64340_I2O_INBOUND_POST_HEAD_POINTER_REG_CPU0_SIDE         0x1C68
-#define MV64340_I2O_INBOUND_POST_TAIL_POINTER_REG_CPU0_SIDE         0x1C6C
-#define MV64340_I2O_OUTBOUND_FREE_HEAD_POINTER_REG_CPU0_SIDE        0x1C70
-#define MV64340_I2O_OUTBOUND_FREE_TAIL_POINTER_REG_CPU0_SIDE        0x1C74
-#define MV64340_I2O_OUTBOUND_POST_HEAD_POINTER_REG_CPU0_SIDE        0x1CF8
-#define MV64340_I2O_OUTBOUND_POST_TAIL_POINTER_REG_CPU0_SIDE        0x1CFC
-#define MV64340_I2O_INBOUND_MESSAGE_REG0_CPU1_SIDE		    0x1C90
-#define MV64340_I2O_INBOUND_MESSAGE_REG1_CPU1_SIDE  		    0x1C94
-#define MV64340_I2O_OUTBOUND_MESSAGE_REG0_CPU1_SIDE 		    0x1C98
-#define MV64340_I2O_OUTBOUND_MESSAGE_REG1_CPU1_SIDE  		    0x1C9C
-#define MV64340_I2O_INBOUND_DOORBELL_REG_CPU1_SIDE  		    0x1CA0
-#define MV64340_I2O_INBOUND_INTERRUPT_CAUSE_REG_CPU1_SIDE  	    0x1CA4
-#define MV64340_I2O_INBOUND_INTERRUPT_MASK_REG_CPU1_SIDE	    0x1CA8
-#define MV64340_I2O_OUTBOUND_DOORBELL_REG_CPU1_SIDE 		    0x1CAC
-#define MV64340_I2O_OUTBOUND_INTERRUPT_CAUSE_REG_CPU1_SIDE          0x1CB0
-#define MV64340_I2O_OUTBOUND_INTERRUPT_MASK_REG_CPU1_SIDE           0x1CB4
-#define MV64340_I2O_INBOUND_QUEUE_PORT_VIRTUAL_REG_CPU1_SIDE        0x1CC0
-#define MV64340_I2O_OUTBOUND_QUEUE_PORT_VIRTUAL_REG_CPU1_SIDE       0x1CC4
-#define MV64340_I2O_QUEUE_CONTROL_REG_CPU1_SIDE 		    0x1CD0
-#define MV64340_I2O_QUEUE_BASE_ADDR_REG_CPU1_SIDE 		    0x1CD4
-#define MV64340_I2O_INBOUND_FREE_HEAD_POINTER_REG_CPU1_SIDE         0x1CE0
-#define MV64340_I2O_INBOUND_FREE_TAIL_POINTER_REG_CPU1_SIDE         0x1CE4
-#define MV64340_I2O_INBOUND_POST_HEAD_POINTER_REG_CPU1_SIDE         0x1CE8
-#define MV64340_I2O_INBOUND_POST_TAIL_POINTER_REG_CPU1_SIDE         0x1CEC
-#define MV64340_I2O_OUTBOUND_FREE_HEAD_POINTER_REG_CPU1_SIDE        0x1CF0
-#define MV64340_I2O_OUTBOUND_FREE_TAIL_POINTER_REG_CPU1_SIDE        0x1CF4
-#define MV64340_I2O_OUTBOUND_POST_HEAD_POINTER_REG_CPU1_SIDE        0x1C78
-#define MV64340_I2O_OUTBOUND_POST_TAIL_POINTER_REG_CPU1_SIDE        0x1C7C
-
-/****************************************/
-/*        Ethernet Unit Registers  		*/
-/****************************************/
-
-/*******************************************/
-/*          CUNIT  Registers               */
-/*******************************************/
-
-         /* Address Decoding Register Map */
-           
-#define MV64340_CUNIT_BASE_ADDR_REG0                                0xf200
-#define MV64340_CUNIT_BASE_ADDR_REG1                                0xf208
-#define MV64340_CUNIT_BASE_ADDR_REG2                                0xf210
-#define MV64340_CUNIT_BASE_ADDR_REG3                                0xf218
-#define MV64340_CUNIT_SIZE0                                         0xf204
-#define MV64340_CUNIT_SIZE1                                         0xf20c
-#define MV64340_CUNIT_SIZE2                                         0xf214
-#define MV64340_CUNIT_SIZE3                                         0xf21c
-#define MV64340_CUNIT_HIGH_ADDR_REMAP_REG0                          0xf240
-#define MV64340_CUNIT_HIGH_ADDR_REMAP_REG1                          0xf244
-#define MV64340_CUNIT_BASE_ADDR_ENABLE_REG                          0xf250
-#define MV64340_MPSC0_ACCESS_PROTECTION_REG                         0xf254
-#define MV64340_MPSC1_ACCESS_PROTECTION_REG                         0xf258
-#define MV64340_CUNIT_INTERNAL_SPACE_BASE_ADDR_REG                  0xf25C
-
-        /*  Error Report Registers  */
-
-#define MV64340_CUNIT_INTERRUPT_CAUSE_REG                           0xf310
-#define MV64340_CUNIT_INTERRUPT_MASK_REG                            0xf314
-#define MV64340_CUNIT_ERROR_ADDR                                    0xf318
-
-        /*  Cunit Control Registers */
-
-#define MV64340_CUNIT_ARBITER_CONTROL_REG                           0xf300
-#define MV64340_CUNIT_CONFIG_REG                                    0xb40c
-#define MV64340_CUNIT_CRROSBAR_TIMEOUT_REG                          0xf304
-
-        /*  Cunit Debug Registers   */
-
-#define MV64340_CUNIT_DEBUG_LOW                                     0xf340
-#define MV64340_CUNIT_DEBUG_HIGH                                    0xf344
-#define MV64340_CUNIT_MMASK                                         0xf380
-
-        /*  MPSCs Clocks Routing Registers  */
-
-#define MV64340_MPSC_ROUTING_REG                                    0xb400
-#define MV64340_MPSC_RX_CLOCK_ROUTING_REG                           0xb404
-#define MV64340_MPSC_TX_CLOCK_ROUTING_REG                           0xb408
-
-        /*  MPSCs Interrupts Registers    */
-
-#define MV64340_MPSC_CAUSE_REG(port)                               (0xb804 + (port<<3))
-#define MV64340_MPSC_MASK_REG(port)                                (0xb884 + (port<<3))
- 
-#define MV64340_MPSC_MAIN_CONFIG_LOW(port)                         (0x8000 + (port<<12))
-#define MV64340_MPSC_MAIN_CONFIG_HIGH(port)                        (0x8004 + (port<<12))    
-#define MV64340_MPSC_PROTOCOL_CONFIG(port)                         (0x8008 + (port<<12))    
-#define MV64340_MPSC_CHANNEL_REG1(port)                            (0x800c + (port<<12))    
-#define MV64340_MPSC_CHANNEL_REG2(port)                            (0x8010 + (port<<12))    
-#define MV64340_MPSC_CHANNEL_REG3(port)                            (0x8014 + (port<<12))    
-#define MV64340_MPSC_CHANNEL_REG4(port)                            (0x8018 + (port<<12))    
-#define MV64340_MPSC_CHANNEL_REG5(port)                            (0x801c + (port<<12))    
-#define MV64340_MPSC_CHANNEL_REG6(port)                            (0x8020 + (port<<12))    
-#define MV64340_MPSC_CHANNEL_REG7(port)                            (0x8024 + (port<<12))    
-#define MV64340_MPSC_CHANNEL_REG8(port)                            (0x8028 + (port<<12))    
-#define MV64340_MPSC_CHANNEL_REG9(port)                            (0x802c + (port<<12))    
-#define MV64340_MPSC_CHANNEL_REG10(port)                           (0x8030 + (port<<12))    
-        
-        /*  MPSC0 Registers      */
-
-
-/***************************************/
-/*          SDMA Registers             */
-/***************************************/
-
-#define MV64340_SDMA_CONFIG_REG(channel)                        (0x4000 + (channel<<13))        
-#define MV64340_SDMA_COMMAND_REG(channel)                       (0x4008 + (channel<<13))        
-#define MV64340_SDMA_CURRENT_RX_DESCRIPTOR_POINTER(channel)     (0x4810 + (channel<<13))        
-#define MV64340_SDMA_CURRENT_TX_DESCRIPTOR_POINTER(channel)     (0x4c10 + (channel<<13))        
-#define MV64340_SDMA_FIRST_TX_DESCRIPTOR_POINTER(channel)       (0x4c14 + (channel<<13)) 
-
-#define MV64340_SDMA_CAUSE_REG                                      0xb800
-#define MV64340_SDMA_MASK_REG                                       0xb880
-         
-/* BRG Interrupts */
-
-#define MV64340_BRG_CONFIG_REG(brg)                              (0xb200 + (brg<<3))
-#define MV64340_BRG_BAUDE_TUNING_REG(brg)                        (0xb208 + (brg<<3))
-#define MV64340_BRG_CAUSE_REG                                       0xb834
-#define MV64340_BRG_MASK_REG                                        0xb8b4
-
-/****************************************/
-/* DMA Channel Control			*/
-/****************************************/
-
-#define MV64340_DMA_CHANNEL0_CONTROL 				    0x840
-#define MV64340_DMA_CHANNEL0_CONTROL_HIGH			    0x880
-#define MV64340_DMA_CHANNEL1_CONTROL 				    0x844
-#define MV64340_DMA_CHANNEL1_CONTROL_HIGH			    0x884
-#define MV64340_DMA_CHANNEL2_CONTROL 				    0x848
-#define MV64340_DMA_CHANNEL2_CONTROL_HIGH			    0x888
-#define MV64340_DMA_CHANNEL3_CONTROL 				    0x84C
-#define MV64340_DMA_CHANNEL3_CONTROL_HIGH			    0x88C
-
-
-/****************************************/
-/*           IDMA Registers             */
-/****************************************/
-
-#define MV64340_DMA_CHANNEL0_BYTE_COUNT                             0x800
-#define MV64340_DMA_CHANNEL1_BYTE_COUNT                             0x804
-#define MV64340_DMA_CHANNEL2_BYTE_COUNT                             0x808
-#define MV64340_DMA_CHANNEL3_BYTE_COUNT                             0x80C
-#define MV64340_DMA_CHANNEL0_SOURCE_ADDR                            0x810
-#define MV64340_DMA_CHANNEL1_SOURCE_ADDR                            0x814
-#define MV64340_DMA_CHANNEL2_SOURCE_ADDR                            0x818
-#define MV64340_DMA_CHANNEL3_SOURCE_ADDR                            0x81c
-#define MV64340_DMA_CHANNEL0_DESTINATION_ADDR                       0x820
-#define MV64340_DMA_CHANNEL1_DESTINATION_ADDR                       0x824
-#define MV64340_DMA_CHANNEL2_DESTINATION_ADDR                       0x828
-#define MV64340_DMA_CHANNEL3_DESTINATION_ADDR                       0x82C
-#define MV64340_DMA_CHANNEL0_NEXT_DESCRIPTOR_POINTER                0x830
-#define MV64340_DMA_CHANNEL1_NEXT_DESCRIPTOR_POINTER                0x834
-#define MV64340_DMA_CHANNEL2_NEXT_DESCRIPTOR_POINTER                0x838
-#define MV64340_DMA_CHANNEL3_NEXT_DESCRIPTOR_POINTER                0x83C
-#define MV64340_DMA_CHANNEL0_CURRENT_DESCRIPTOR_POINTER             0x870
-#define MV64340_DMA_CHANNEL1_CURRENT_DESCRIPTOR_POINTER             0x874
-#define MV64340_DMA_CHANNEL2_CURRENT_DESCRIPTOR_POINTER             0x878
-#define MV64340_DMA_CHANNEL3_CURRENT_DESCRIPTOR_POINTER             0x87C
-
- /*  IDMA Address Decoding Base Address Registers  */
- 
-#define MV64340_DMA_BASE_ADDR_REG0                                  0xa00
-#define MV64340_DMA_BASE_ADDR_REG1                                  0xa08
-#define MV64340_DMA_BASE_ADDR_REG2                                  0xa10
-#define MV64340_DMA_BASE_ADDR_REG3                                  0xa18
-#define MV64340_DMA_BASE_ADDR_REG4                                  0xa20
-#define MV64340_DMA_BASE_ADDR_REG5                                  0xa28
-#define MV64340_DMA_BASE_ADDR_REG6                                  0xa30
-#define MV64340_DMA_BASE_ADDR_REG7                                  0xa38
- 
- /*  IDMA Address Decoding Size Address Register   */
- 
-#define MV64340_DMA_SIZE_REG0                                       0xa04
-#define MV64340_DMA_SIZE_REG1                                       0xa0c
-#define MV64340_DMA_SIZE_REG2                                       0xa14
-#define MV64340_DMA_SIZE_REG3                                       0xa1c
-#define MV64340_DMA_SIZE_REG4                                       0xa24
-#define MV64340_DMA_SIZE_REG5                                       0xa2c
-#define MV64340_DMA_SIZE_REG6                                       0xa34
-#define MV64340_DMA_SIZE_REG7                                       0xa3C
-
- /* IDMA Address Decoding High Address Remap and Access 
-                  Protection Registers                    */
-                  
-#define MV64340_DMA_HIGH_ADDR_REMAP_REG0                            0xa60
-#define MV64340_DMA_HIGH_ADDR_REMAP_REG1                            0xa64
-#define MV64340_DMA_HIGH_ADDR_REMAP_REG2                            0xa68
-#define MV64340_DMA_HIGH_ADDR_REMAP_REG3                            0xa6C
-#define MV64340_DMA_BASE_ADDR_ENABLE_REG                            0xa80
-#define MV64340_DMA_CHANNEL0_ACCESS_PROTECTION_REG                  0xa70
-#define MV64340_DMA_CHANNEL1_ACCESS_PROTECTION_REG                  0xa74
-#define MV64340_DMA_CHANNEL2_ACCESS_PROTECTION_REG                  0xa78
-#define MV64340_DMA_CHANNEL3_ACCESS_PROTECTION_REG                  0xa7c
-#define MV64340_DMA_ARBITER_CONTROL                                 0x860
-#define MV64340_DMA_CROSS_BAR_TIMEOUT                               0x8d0
-
- /*  IDMA Headers Retarget Registers   */
-
-#define MV64340_DMA_HEADERS_RETARGET_CONTROL                        0xa84
-#define MV64340_DMA_HEADERS_RETARGET_BASE                           0xa88
-
- /*  IDMA Interrupt Register  */
-
-#define MV64340_DMA_INTERRUPT_CAUSE_REG                             0x8c0
-#define MV64340_DMA_INTERRUPT_CAUSE_MASK                            0x8c4
-#define MV64340_DMA_ERROR_ADDR                                      0x8c8
-#define MV64340_DMA_ERROR_SELECT                                    0x8cc
-
- /*  IDMA Debug Register ( for internal use )    */
-
-#define MV64340_DMA_DEBUG_LOW                                       0x8e0
-#define MV64340_DMA_DEBUG_HIGH                                      0x8e4
-#define MV64340_DMA_SPARE                                           0xA8C
-
-/****************************************/
-/* Timer_Counter 			*/
-/****************************************/
-
-#define MV64340_TIMER_COUNTER0					    0x850
-#define MV64340_TIMER_COUNTER1					    0x854
-#define MV64340_TIMER_COUNTER2					    0x858
-#define MV64340_TIMER_COUNTER3					    0x85C
-#define MV64340_TIMER_COUNTER_0_3_CONTROL			    0x864
-#define MV64340_TIMER_COUNTER_0_3_INTERRUPT_CAUSE		    0x868
-#define MV64340_TIMER_COUNTER_0_3_INTERRUPT_MASK      		    0x86c
-
-/****************************************/
-/*         Watchdog registers  	        */
-/****************************************/
-
-#define MV64340_WATCHDOG_CONFIG_REG                                 0xb410
-#define MV64340_WATCHDOG_VALUE_REG                                  0xb414
-
-/****************************************/
-/* I2C Registers                        */
-/****************************************/
-
-#define MV64XXX_I2C_OFFSET                                          0xc000
-#define MV64XXX_I2C_REG_BLOCK_SIZE                                  0x0020
-
-/****************************************/
-/* GPP Interface Registers              */
-/****************************************/
-
-#define MV64340_GPP_IO_CONTROL                                      0xf100
-#define MV64340_GPP_LEVEL_CONTROL                                   0xf110
-#define MV64340_GPP_VALUE                                           0xf104
-#define MV64340_GPP_INTERRUPT_CAUSE                                 0xf108
-#define MV64340_GPP_INTERRUPT_MASK0                                 0xf10c
-#define MV64340_GPP_INTERRUPT_MASK1                                 0xf114
-#define MV64340_GPP_VALUE_SET                                       0xf118
-#define MV64340_GPP_VALUE_CLEAR                                     0xf11c
-
-/****************************************/
-/* Interrupt Controller Registers       */
-/****************************************/
-
-/****************************************/
-/* Interrupts	  			*/
-/****************************************/
-
-#define MV64340_MAIN_INTERRUPT_CAUSE_LOW                            0x004
-#define MV64340_MAIN_INTERRUPT_CAUSE_HIGH                           0x00c
-#define MV64340_CPU_INTERRUPT0_MASK_LOW                             0x014
-#define MV64340_CPU_INTERRUPT0_MASK_HIGH                            0x01c
-#define MV64340_CPU_INTERRUPT0_SELECT_CAUSE                         0x024
-#define MV64340_CPU_INTERRUPT1_MASK_LOW                             0x034
-#define MV64340_CPU_INTERRUPT1_MASK_HIGH                            0x03c
-#define MV64340_CPU_INTERRUPT1_SELECT_CAUSE                         0x044
-#define MV64340_INTERRUPT0_MASK_0_LOW                               0x054
-#define MV64340_INTERRUPT0_MASK_0_HIGH                              0x05c
-#define MV64340_INTERRUPT0_SELECT_CAUSE                             0x064
-#define MV64340_INTERRUPT1_MASK_0_LOW                               0x074
-#define MV64340_INTERRUPT1_MASK_0_HIGH                              0x07c
-#define MV64340_INTERRUPT1_SELECT_CAUSE                             0x084
-
-/****************************************/
-/*      MPP Interface Registers         */
-/****************************************/
-
-#define MV64340_MPP_CONTROL0                                        0xf000
-#define MV64340_MPP_CONTROL1                                        0xf004
-#define MV64340_MPP_CONTROL2                                        0xf008
-#define MV64340_MPP_CONTROL3                                        0xf00c
-
-/****************************************/
-/*    Serial Initialization registers   */
-/****************************************/
-
-#define MV64340_SERIAL_INIT_LAST_DATA                               0xf324
-#define MV64340_SERIAL_INIT_CONTROL                                 0xf328
-#define MV64340_SERIAL_INIT_STATUS                                  0xf32c
-
-extern void mv64340_irq_init(unsigned int base);
-
-/* MPSC Platform Device, Driver Data (Shared register regions) */
-#define	MPSC_SHARED_NAME		"mpsc_shared"
-
-#define	MPSC_ROUTING_BASE_ORDER		0
-#define	MPSC_SDMA_INTR_BASE_ORDER	1
-
-#define MPSC_ROUTING_REG_BLOCK_SIZE	0x000c
-#define MPSC_SDMA_INTR_REG_BLOCK_SIZE	0x0084
-
-struct mpsc_shared_pdata {
-	u32	mrr_val;
-	u32	rcrr_val;
-	u32	tcrr_val;
-	u32	intr_cause_val;
-	u32	intr_mask_val;
-};
-
-/* MPSC Platform Device, Driver Data */
-#define	MPSC_CTLR_NAME			"mpsc"
-
-#define	MPSC_BASE_ORDER			0
-#define	MPSC_SDMA_BASE_ORDER		1
-#define	MPSC_BRG_BASE_ORDER		2
-
-#define MPSC_REG_BLOCK_SIZE		0x0038
-#define MPSC_SDMA_REG_BLOCK_SIZE	0x0c18
-#define MPSC_BRG_REG_BLOCK_SIZE		0x0008
-
-struct mpsc_pdata {
-	u8	mirror_regs;
-	u8	cache_mgmt;
-	u8	max_idle;
-	int	default_baud;
-	int	default_bits;
-	int	default_parity;
-	int	default_flow;
-	u32	chr_1_val;
-	u32	chr_2_val;
-	u32	chr_10_val;
-	u32	mpcr_val;
-	u32	bcr_val;
-	u8	brg_can_tune;
-	u8	brg_clk_src;
-	u32	brg_clk_freq;
-};
-
-/* Watchdog Platform Device, Driver Data */
-#define	MV64x60_WDT_NAME			"mv64x60_wdt"
-
-struct mv64x60_wdt_pdata {
-	int	timeout;	/* watchdog expiry in seconds, default 10 */
-	int	bus_clk;	/* bus clock in MHz, default 133 */
-};
-
-#endif /* __ASM_MV643XX_H */
diff --git a/ANDROID_3.4.5/include/linux/mv643xx_eth.h b/ANDROID_3.4.5/include/linux/mv643xx_eth.h
deleted file mode 100644
index 30b0c4e7..00000000
--- a/ANDROID_3.4.5/include/linux/mv643xx_eth.h
+++ /dev/null
@@ -1,83 +0,0 @@
-/*
- * MV-643XX ethernet platform device data definition file.
- */
-
-#ifndef __LINUX_MV643XX_ETH_H
-#define __LINUX_MV643XX_ETH_H
-
-#include <linux/mbus.h>
-
-#define MV643XX_ETH_SHARED_NAME		"mv643xx_eth"
-#define MV643XX_ETH_NAME		"mv643xx_eth_port"
-#define MV643XX_ETH_SHARED_REGS		0x2000
-#define MV643XX_ETH_SHARED_REGS_SIZE	0x2000
-#define MV643XX_ETH_BAR_4		0x2220
-#define MV643XX_ETH_SIZE_REG_4		0x2224
-#define MV643XX_ETH_BASE_ADDR_ENABLE_REG	0x2290
-
-struct mv643xx_eth_shared_platform_data {
-	struct mbus_dram_target_info	*dram;
-	struct platform_device	*shared_smi;
-	unsigned int		t_clk;
-	/*
-	 * Max packet size for Tx IP/Layer 4 checksum, when set to 0, default
-	 * limit of 9KiB will be used.
-	 */
-	int			tx_csum_limit;
-};
-
-#define MV643XX_ETH_PHY_ADDR_DEFAULT	0
-#define MV643XX_ETH_PHY_ADDR(x)		(0x80 | (x))
-#define MV643XX_ETH_PHY_NONE		0xff
-
-struct mv643xx_eth_platform_data {
-	/*
-	 * Pointer back to our parent instance, and our port number.
-	 */
-	struct platform_device	*shared;
-	int			port_number;
-
-	/*
-	 * Whether a PHY is present, and if yes, at which address.
-	 */
-	int			phy_addr;
-
-	/*
-	 * Use this MAC address if it is valid, overriding the
-	 * address that is already in the hardware.
-	 */
-	u8			mac_addr[6];
-
-	/*
-	 * If speed is 0, autonegotiation is enabled.
-	 *   Valid values for speed: 0, SPEED_10, SPEED_100, SPEED_1000.
-	 *   Valid values for duplex: DUPLEX_HALF, DUPLEX_FULL.
-	 */
-	int			speed;
-	int			duplex;
-
-	/*
-	 * How many RX/TX queues to use.
-	 */
-	int			rx_queue_count;
-	int			tx_queue_count;
-
-	/*
-	 * Override default RX/TX queue sizes if nonzero.
-	 */
-	int			rx_queue_size;
-	int			tx_queue_size;
-
-	/*
-	 * Use on-chip SRAM for RX/TX descriptors if size is nonzero
-	 * and sufficient to contain all descriptors for the requested
-	 * ring sizes.
-	 */
-	unsigned long		rx_sram_addr;
-	int			rx_sram_size;
-	unsigned long		tx_sram_addr;
-	int			tx_sram_size;
-};
-
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/mv643xx_i2c.h b/ANDROID_3.4.5/include/linux/mv643xx_i2c.h
deleted file mode 100644
index 5db5152e..00000000
--- a/ANDROID_3.4.5/include/linux/mv643xx_i2c.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#ifndef _MV64XXX_I2C_H_
-#define _MV64XXX_I2C_H_
-
-#include <linux/types.h>
-
-#define MV64XXX_I2C_CTLR_NAME	"mv64xxx_i2c"
-
-/* i2c Platform Device, Driver Data */
-struct mv64xxx_i2c_pdata {
-	u32	freq_m;
-	u32	freq_n;
-	u32	timeout;	/* In milliseconds */
-};
-
-#endif /*_MV64XXX_I2C_H_*/
diff --git a/ANDROID_3.4.5/include/linux/mxm-wmi.h b/ANDROID_3.4.5/include/linux/mxm-wmi.h
deleted file mode 100644
index 617a2950..00000000
--- a/ANDROID_3.4.5/include/linux/mxm-wmi.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * MXM WMI driver
- *
- * Copyright(C) 2010 Red Hat.
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef MXM_WMI_H
-#define MXM_WMI_H
-
-/* discrete adapters */
-#define MXM_MXDS_ADAPTER_0 0x0
-#define MXM_MXDS_ADAPTER_1 0x0
-/* integrated adapter */
-#define MXM_MXDS_ADAPTER_IGD 0x10
-int mxm_wmi_call_mxds(int adapter);
-int mxm_wmi_call_mxmx(int adapter);
-bool mxm_wmi_supported(void);
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/n_r3964.h b/ANDROID_3.4.5/include/linux/n_r3964.h
deleted file mode 100644
index 54b8e0d8..00000000
--- a/ANDROID_3.4.5/include/linux/n_r3964.h
+++ /dev/null
@@ -1,231 +0,0 @@
-/* r3964 linediscipline for linux
- *
- * -----------------------------------------------------------
- * Copyright by
- * Philips Automation Projects
- * Kassel (Germany)
- * -----------------------------------------------------------
- * This software may be used and distributed according to the terms of
- * the GNU General Public License, incorporated herein by reference.
- *
- * Author:
- * L. Haag
- *
- * $Log: r3964.h,v $
- * Revision 1.4  2005/12/21 19:54:24  Kurt Huwig <kurt huwig de>
- * Fixed HZ usage on 2.6 kernels
- * Removed unnecessary include
- *
- * Revision 1.3  2001/03/18 13:02:24  dwmw2
- * Fix timer usage, use spinlocks properly.
- *
- * Revision 1.2  2001/03/18 12:53:15  dwmw2
- * Merge changes in 2.4.2
- *
- * Revision 1.1.1.1  1998/10/13 16:43:14  dwmw2
- * This'll screw the version control
- *
- * Revision 1.6  1998/09/30 00:40:38  dwmw2
- * Updated to use kernel's N_R3964 if available
- *
- * Revision 1.4  1998/04/02 20:29:44  lhaag
- * select, blocking, ...
- *
- * Revision 1.3  1998/02/12 18:58:43  root
- * fixed some memory leaks
- * calculation of checksum characters
- *
- * Revision 1.2  1998/02/07 13:03:17  root
- * ioctl read_telegram
- *
- * Revision 1.1  1998/02/06 19:19:43  root
- * Initial revision
- *
- *
- */
-
-#ifndef __LINUX_N_R3964_H__
-#define __LINUX_N_R3964_H__
-
-/* line disciplines for r3964 protocol */
-
-#ifdef __KERNEL__
-
-#include <linux/param.h>
-
-/*
- * Common ascii handshake characters:
- */
-
-#define STX 0x02
-#define ETX 0x03
-#define DLE 0x10
-#define NAK 0x15
-
-/*
- * Timeouts (from milliseconds to jiffies)
- */
-
-#define R3964_TO_QVZ ((550)*HZ/1000)
-#define R3964_TO_ZVZ ((220)*HZ/1000)
-#define R3964_TO_NO_BUF ((400)*HZ/1000)
-#define R3964_NO_TX_ROOM ((100)*HZ/1000)
-#define R3964_TO_RX_PANIC ((4000)*HZ/1000)
-#define R3964_MAX_RETRIES 5
-
-#endif
-
-/*
- * Ioctl-commands
- */
-
-#define R3964_ENABLE_SIGNALS      0x5301
-#define R3964_SETPRIORITY         0x5302
-#define R3964_USE_BCC             0x5303
-#define R3964_READ_TELEGRAM       0x5304
-
-/* Options for R3964_SETPRIORITY */
-#define R3964_MASTER   0
-#define R3964_SLAVE    1
-
-/* Options for R3964_ENABLE_SIGNALS */
-#define R3964_SIG_ACK   0x0001
-#define R3964_SIG_DATA  0x0002
-#define R3964_SIG_ALL   0x000f
-#define R3964_SIG_NONE  0x0000
-#define R3964_USE_SIGIO 0x1000
-
-/*
- * r3964 operation states:
- */
-#ifdef __KERNEL__
-
-enum { R3964_IDLE, 
-	   R3964_TX_REQUEST, R3964_TRANSMITTING, 
-	   R3964_WAIT_ZVZ_BEFORE_TX_RETRY, R3964_WAIT_FOR_TX_ACK,
-	   R3964_WAIT_FOR_RX_BUF,
-	   R3964_RECEIVING, R3964_WAIT_FOR_BCC, R3964_WAIT_FOR_RX_REPEAT
-	   };
-
-/*
- * All open file-handles are 'clients' and are stored in a linked list:
- */
-
-struct r3964_message;
-
-struct r3964_client_info {
-	spinlock_t     lock;
-	struct pid    *pid;
-	unsigned int   sig_flags;
-
-	struct r3964_client_info *next;
-
-	struct r3964_message *first_msg;
-	struct r3964_message *last_msg;
-	struct r3964_block_header *next_block_to_read;
-	int            msg_count;
-};
-
-
-#endif
-
-/* types for msg_id: */
-enum {R3964_MSG_ACK=1, R3964_MSG_DATA };
-
-#define R3964_MAX_MSG_COUNT 32
-
-/* error codes for client messages */
-#define R3964_OK 0        /* no error. */
-#define R3964_TX_FAIL -1  /* transmission error, block NOT sent */
-#define R3964_OVERFLOW -2 /* msg queue overflow */
-
-/* the client gets this struct when calling read(fd,...): */
-struct r3964_client_message {
-	  int     msg_id;
-	  int     arg;
-	  int     error_code;
-};
-
-#define R3964_MTU      256
-
-
-#ifdef __KERNEL__
-
-struct r3964_block_header;
-
-/* internal version of client_message: */
-struct r3964_message {
-	  int     msg_id;
-	  int     arg;
-	  int     error_code;
-	  struct r3964_block_header *block;
-	  struct r3964_message *next;
-};
-
-/*
- * Header of received block in rx_buf/tx_buf:
- */
-
-struct r3964_block_header 
-{
-	unsigned int length;             /* length in chars without header */
-	unsigned char *data;             /* usually data is located 
-                                        immediately behind this struct */
-	unsigned int locks;              /* only used in rx_buffer */
-	  
-    struct r3964_block_header *next;
-	struct r3964_client_info *owner;  /* =NULL in rx_buffer */
-};
-
-/*
- * If rx_buf hasn't enough space to store R3964_MTU chars,
- * we will reject all incoming STX-requests by sending NAK.
- */
-
-#define RX_BUF_SIZE    4000
-#define TX_BUF_SIZE    4000
-#define R3964_MAX_BLOCKS_IN_RX_QUEUE 100
-
-#define R3964_PARITY 0x0001
-#define R3964_FRAME  0x0002
-#define R3964_OVERRUN 0x0004
-#define R3964_UNKNOWN 0x0008
-#define R3964_BREAK   0x0010
-#define R3964_CHECKSUM 0x0020
-#define R3964_ERROR  0x003f
-#define R3964_BCC   0x4000
-#define R3964_DEBUG 0x8000
-
-
-struct r3964_info {
-	spinlock_t     lock;
-	struct tty_struct *tty;
-	unsigned char priority;
-	unsigned char *rx_buf;            /* ring buffer */
-	unsigned char *tx_buf;
-
-	wait_queue_head_t read_wait;
-	//struct wait_queue *read_wait;
-
-	struct r3964_block_header *rx_first;
-	struct r3964_block_header *rx_last;
-	struct r3964_block_header *tx_first;
-	struct r3964_block_header *tx_last;
-	unsigned int tx_position;
-        unsigned int rx_position;
-	unsigned char last_rx;
-	unsigned char bcc;
-        unsigned int  blocks_in_rx_queue;
-	  
-	
-	struct r3964_client_info *firstClient;
-	unsigned int state;
-	unsigned int flags;
-
-	struct timer_list tmr;
-	int nRetry;
-};
-
-#endif	
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/namei.h b/ANDROID_3.4.5/include/linux/namei.h
deleted file mode 100644
index ffc02135..00000000
--- a/ANDROID_3.4.5/include/linux/namei.h
+++ /dev/null
@@ -1,112 +0,0 @@
-#ifndef _LINUX_NAMEI_H
-#define _LINUX_NAMEI_H
-
-#include <linux/dcache.h>
-#include <linux/linkage.h>
-#include <linux/path.h>
-
-struct vfsmount;
-
-struct open_intent {
-	int	flags;
-	int	create_mode;
-	struct file *file;
-};
-
-enum { MAX_NESTED_LINKS = 8 };
-
-struct nameidata {
-	struct path	path;
-	struct qstr	last;
-	struct path	root;
-	struct inode	*inode; /* path.dentry.d_inode */
-	unsigned int	flags;
-	unsigned	seq;
-	int		last_type;
-	unsigned	depth;
-	char *saved_names[MAX_NESTED_LINKS + 1];
-
-	/* Intent data */
-	union {
-		struct open_intent open;
-	} intent;
-};
-
-/*
- * Type of the last component on LOOKUP_PARENT
- */
-enum {LAST_NORM, LAST_ROOT, LAST_DOT, LAST_DOTDOT, LAST_BIND};
-
-/*
- * The bitmask for a lookup event:
- *  - follow links at the end
- *  - require a directory
- *  - ending slashes ok even for nonexistent files
- *  - internal "there are more path components" flag
- *  - dentry cache is untrusted; force a real lookup
- *  - suppress terminal automount
- */
-#define LOOKUP_FOLLOW		0x0001
-#define LOOKUP_DIRECTORY	0x0002
-#define LOOKUP_AUTOMOUNT	0x0004
-
-#define LOOKUP_PARENT		0x0010
-#define LOOKUP_REVAL		0x0020
-#define LOOKUP_RCU		0x0040
-
-/*
- * Intent data
- */
-#define LOOKUP_OPEN		0x0100
-#define LOOKUP_CREATE		0x0200
-#define LOOKUP_EXCL		0x0400
-#define LOOKUP_RENAME_TARGET	0x0800
-
-#define LOOKUP_JUMPED		0x1000
-#define LOOKUP_ROOT		0x2000
-#define LOOKUP_EMPTY		0x4000
-
-extern int user_path_at(int, const char __user *, unsigned, struct path *);
-extern int user_path_at_empty(int, const char __user *, unsigned, struct path *, int *empty);
-
-#define user_path(name, path) user_path_at(AT_FDCWD, name, LOOKUP_FOLLOW, path)
-#define user_lpath(name, path) user_path_at(AT_FDCWD, name, 0, path)
-#define user_path_dir(name, path) \
-	user_path_at(AT_FDCWD, name, LOOKUP_FOLLOW | LOOKUP_DIRECTORY, path)
-
-extern int kern_path(const char *, unsigned, struct path *);
-
-extern struct dentry *kern_path_create(int, const char *, struct path *, int);
-extern struct dentry *user_path_create(int, const char __user *, struct path *, int);
-extern int kern_path_parent(const char *, struct nameidata *);
-extern int vfs_path_lookup(struct dentry *, struct vfsmount *,
-			   const char *, unsigned int, struct path *);
-
-extern struct file *lookup_instantiate_filp(struct nameidata *nd, struct dentry *dentry,
-		int (*open)(struct inode *, struct file *));
-
-extern struct dentry *lookup_one_len(const char *, struct dentry *, int);
-
-extern int follow_down_one(struct path *);
-extern int follow_down(struct path *);
-extern int follow_up(struct path *);
-
-extern struct dentry *lock_rename(struct dentry *, struct dentry *);
-extern void unlock_rename(struct dentry *, struct dentry *);
-
-static inline void nd_set_link(struct nameidata *nd, char *path)
-{
-	nd->saved_names[nd->depth] = path;
-}
-
-static inline char *nd_get_link(struct nameidata *nd)
-{
-	return nd->saved_names[nd->depth];
-}
-
-static inline void nd_terminate_link(void *name, size_t len, size_t maxlen)
-{
-	((char *) name)[min(len, maxlen)] = '\0';
-}
-
-#endif /* _LINUX_NAMEI_H */
diff --git a/ANDROID_3.4.5/include/linux/nbd.h b/ANDROID_3.4.5/include/linux/nbd.h
deleted file mode 100644
index d146ca10..00000000
--- a/ANDROID_3.4.5/include/linux/nbd.h
+++ /dev/null
@@ -1,102 +0,0 @@
-/*
- * 1999 Copyright (C) Pavel Machek, pavel@ucw.cz. This code is GPL.
- * 1999/11/04 Copyright (C) 1999 VMware, Inc. (Regis "HPReg" Duchesne)
- *            Made nbd_end_request() use the io_request_lock
- * 2001 Copyright (C) Steven Whitehouse
- *            New nbd_end_request() for compatibility with new linux block
- *            layer code.
- * 2003/06/24 Louis D. Langholtz <ldl@aros.net>
- *            Removed unneeded blksize_bits field from nbd_device struct.
- *            Cleanup PARANOIA usage & code.
- * 2004/02/19 Paul Clements
- *            Removed PARANOIA, plus various cleanup and comments
- */
-
-#ifndef LINUX_NBD_H
-#define LINUX_NBD_H
-
-#include <linux/types.h>
-
-#define NBD_SET_SOCK	_IO( 0xab, 0 )
-#define NBD_SET_BLKSIZE	_IO( 0xab, 1 )
-#define NBD_SET_SIZE	_IO( 0xab, 2 )
-#define NBD_DO_IT	_IO( 0xab, 3 )
-#define NBD_CLEAR_SOCK	_IO( 0xab, 4 )
-#define NBD_CLEAR_QUE	_IO( 0xab, 5 )
-#define NBD_PRINT_DEBUG	_IO( 0xab, 6 )
-#define NBD_SET_SIZE_BLOCKS	_IO( 0xab, 7 )
-#define NBD_DISCONNECT  _IO( 0xab, 8 )
-#define NBD_SET_TIMEOUT _IO( 0xab, 9 )
-
-enum {
-	NBD_CMD_READ = 0,
-	NBD_CMD_WRITE = 1,
-	NBD_CMD_DISC = 2
-};
-
-#define nbd_cmd(req) ((req)->cmd[0])
-
-/* userspace doesn't need the nbd_device structure */
-#ifdef __KERNEL__
-
-#include <linux/wait.h>
-#include <linux/mutex.h>
-
-/* values for flags field */
-#define NBD_READ_ONLY 0x0001
-#define NBD_WRITE_NOCHK 0x0002
-
-struct request;
-
-struct nbd_device {
-	int flags;
-	int harderror;		/* Code of hard error			*/
-	struct socket * sock;
-	struct file * file; 	/* If == NULL, device is not ready, yet	*/
-	int magic;
-
-	spinlock_t queue_lock;
-	struct list_head queue_head;	/* Requests waiting result */
-	struct request *active_req;
-	wait_queue_head_t active_wq;
-	struct list_head waiting_queue;	/* Requests to be sent */
-	wait_queue_head_t waiting_wq;
-
-	struct mutex tx_lock;
-	struct gendisk *disk;
-	int blksize;
-	u64 bytesize;
-	pid_t pid; /* pid of nbd-client, if attached */
-	int xmit_timeout;
-};
-
-#endif
-
-/* These are sent over the network in the request/reply magic fields */
-
-#define NBD_REQUEST_MAGIC 0x25609513
-#define NBD_REPLY_MAGIC 0x67446698
-/* Do *not* use magics: 0x12560953 0x96744668. */
-
-/*
- * This is the packet used for communication between client and
- * server. All data are in network byte order.
- */
-struct nbd_request {
-	__be32 magic;
-	__be32 type;	/* == READ || == WRITE 	*/
-	char handle[8];
-	__be64 from;
-	__be32 len;
-} __attribute__((packed));
-
-/*
- * This is the reply packet that nbd-server sends back to the client after
- * it has completed an I/O request (or an error occurs).
- */
-struct nbd_reply {
-	__be32 magic;
-	__be32 error;		/* 0 = ok, else error	*/
-	char handle[8];		/* handle you got from request	*/
-};
-#endif
diff --git a/ANDROID_3.4.5/include/linux/ncp.h b/ANDROID_3.4.5/include/linux/ncp.h
deleted file mode 100644
index 99f0adee..00000000
--- a/ANDROID_3.4.5/include/linux/ncp.h
+++ /dev/null
@@ -1,201 +0,0 @@
-/*
- *  ncp.h
- *
- *  Copyright (C) 1995 by Volker Lendecke
- *  Modified for sparc by J.F. Chadima
- *  Modified for __constant_ntoh by Frank A. Vorstenbosch
- *
- */
-
-#ifndef _LINUX_NCP_H
-#define _LINUX_NCP_H
-
-#include <linux/types.h>
-
-#define NCP_PTYPE                (0x11)
-#define NCP_PORT                 (0x0451)
-
-#define NCP_ALLOC_SLOT_REQUEST   (0x1111)
-#define NCP_REQUEST              (0x2222)
-#define NCP_DEALLOC_SLOT_REQUEST (0x5555)
-
-struct ncp_request_header {
-	__u16 type;
-	__u8 sequence;
-	__u8 conn_low;
-	__u8 task;
-	__u8 conn_high;
-	__u8 function;
-	__u8 data[0];
-} __attribute__((packed));
-
-#define NCP_REPLY                (0x3333)
-#define NCP_WATCHDOG		 (0x3E3E)
-#define NCP_POSITIVE_ACK         (0x9999)
-
-struct ncp_reply_header {
-	__u16 type;
-	__u8 sequence;
-	__u8 conn_low;
-	__u8 task;
-	__u8 conn_high;
-	__u8 completion_code;
-	__u8 connection_state;
-	__u8 data[0];
-} __attribute__((packed));
-
-#define NCP_VOLNAME_LEN (16)
-#define NCP_NUMBER_OF_VOLUMES (256)
-struct ncp_volume_info {
-	__u32 total_blocks;
-	__u32 free_blocks;
-	__u32 purgeable_blocks;
-	__u32 not_yet_purgeable_blocks;
-	__u32 total_dir_entries;
-	__u32 available_dir_entries;
-	__u8 sectors_per_block;
-	char volume_name[NCP_VOLNAME_LEN + 1];
-};
-
-#define AR_READ      (cpu_to_le16(1))
-#define AR_WRITE     (cpu_to_le16(2))
-#define AR_EXCLUSIVE (cpu_to_le16(0x20))
-
-#define NCP_FILE_ID_LEN 6
-
-/* Defines for Name Spaces */
-#define NW_NS_DOS     0
-#define NW_NS_MAC     1
-#define NW_NS_NFS     2
-#define NW_NS_FTAM    3
-#define NW_NS_OS2     4
-
-/*  Defines for ReturnInformationMask */
-#define RIM_NAME	      (cpu_to_le32(1))
-#define RIM_SPACE_ALLOCATED   (cpu_to_le32(2))
-#define RIM_ATTRIBUTES	      (cpu_to_le32(4))
-#define RIM_DATA_SIZE	      (cpu_to_le32(8))
-#define RIM_TOTAL_SIZE	      (cpu_to_le32(0x10))
-#define RIM_EXT_ATTR_INFO     (cpu_to_le32(0x20))
-#define RIM_ARCHIVE	      (cpu_to_le32(0x40))
-#define RIM_MODIFY	      (cpu_to_le32(0x80))
-#define RIM_CREATION	      (cpu_to_le32(0x100))
-#define RIM_OWNING_NAMESPACE  (cpu_to_le32(0x200))
-#define RIM_DIRECTORY	      (cpu_to_le32(0x400))
-#define RIM_RIGHTS	      (cpu_to_le32(0x800))
-#define RIM_ALL 	      (cpu_to_le32(0xFFF))
-#define RIM_COMPRESSED_INFO   (cpu_to_le32(0x80000000))
-
-/* Defines for NSInfoBitMask */
-#define NSIBM_NFS_NAME		0x0001
-#define NSIBM_NFS_MODE		0x0002
-#define NSIBM_NFS_GID		0x0004
-#define NSIBM_NFS_NLINKS	0x0008
-#define NSIBM_NFS_RDEV		0x0010
-#define NSIBM_NFS_LINK		0x0020
-#define NSIBM_NFS_CREATED	0x0040
-#define NSIBM_NFS_UID		0x0080
-#define NSIBM_NFS_ACSFLAG	0x0100
-#define NSIBM_NFS_MYFLAG	0x0200
-
-/* open/create modes */
-#define OC_MODE_OPEN	  0x01
-#define OC_MODE_TRUNCATE  0x02
-#define OC_MODE_REPLACE   0x02
-#define OC_MODE_CREATE	  0x08
-
-/* open/create results */
-#define OC_ACTION_NONE	   0x00
-#define OC_ACTION_OPEN	   0x01
-#define OC_ACTION_CREATE   0x02
-#define OC_ACTION_TRUNCATE 0x04
-#define OC_ACTION_REPLACE  0x04
-
-/* access rights attributes */
-#ifndef AR_READ_ONLY
-#define AR_READ_ONLY	   0x0001
-#define AR_WRITE_ONLY	   0x0002
-#define AR_DENY_READ	   0x0004
-#define AR_DENY_WRITE	   0x0008
-#define AR_COMPATIBILITY   0x0010
-#define AR_WRITE_THROUGH   0x0040
-#define AR_OPEN_COMPRESSED 0x0100
-#endif
-
-struct nw_nfs_info {
-	__u32 mode;
-	__u32 rdev;
-};
-
-struct nw_info_struct {
-	__u32 spaceAlloc;
-	__le32 attributes;
-	__u16 flags;
-	__le32 dataStreamSize;
-	__le32 totalStreamSize;
-	__u16 numberOfStreams;
-	__le16 creationTime;
-	__le16 creationDate;
-	__u32 creatorID;
-	__le16 modifyTime;
-	__le16 modifyDate;
-	__u32 modifierID;
-	__le16 lastAccessDate;
-	__u16 archiveTime;
-	__u16 archiveDate;
-	__u32 archiverID;
-	__u16 inheritedRightsMask;
-	__le32 dirEntNum;
-	__le32 DosDirNum;
-	__u32 volNumber;
-	__u32 EADataSize;
-	__u32 EAKeyCount;
-	__u32 EAKeySize;
-	__u32 NSCreator;
-	__u8 nameLen;
-	__u8 entryName[256];
-	/* libncp may depend on there being nothing after entryName */
-#ifdef __KERNEL__
-	struct nw_nfs_info nfs;
-#endif
-} __attribute__((packed));
-
-/* modify mask - use with MODIFY_DOS_INFO structure */
-#define DM_ATTRIBUTES		  (cpu_to_le32(0x02))
-#define DM_CREATE_DATE		  (cpu_to_le32(0x04))
-#define DM_CREATE_TIME		  (cpu_to_le32(0x08))
-#define DM_CREATOR_ID		  (cpu_to_le32(0x10))
-#define DM_ARCHIVE_DATE 	  (cpu_to_le32(0x20))
-#define DM_ARCHIVE_TIME 	  (cpu_to_le32(0x40))
-#define DM_ARCHIVER_ID		  (cpu_to_le32(0x80))
-#define DM_MODIFY_DATE		  (cpu_to_le32(0x0100))
-#define DM_MODIFY_TIME		  (cpu_to_le32(0x0200))
-#define DM_MODIFIER_ID		  (cpu_to_le32(0x0400))
-#define DM_LAST_ACCESS_DATE	  (cpu_to_le32(0x0800))
-#define DM_INHERITED_RIGHTS_MASK  (cpu_to_le32(0x1000))
-#define DM_MAXIMUM_SPACE	  (cpu_to_le32(0x2000))
-
-struct nw_modify_dos_info {
-	__le32 attributes;
-	__le16 creationDate;
-	__le16 creationTime;
-	__u32 creatorID;
-	__le16 modifyDate;
-	__le16 modifyTime;
-	__u32 modifierID;
-	__u16 archiveDate;
-	__u16 archiveTime;
-	__u32 archiverID;
-	__le16 lastAccessDate;
-	__u16 inheritanceGrantMask;
-	__u16 inheritanceRevokeMask;
-	__u32 maximumSpace;
-} __attribute__((packed));
-
-struct nw_search_sequence {
-	__u8 volNumber;
-	__u32 dirBase;
-	__u32 sequence;
-} __attribute__((packed));
-
-#endif				/* _LINUX_NCP_H */
diff --git a/ANDROID_3.4.5/include/linux/ncp_fs.h b/ANDROID_3.4.5/include/linux/ncp_fs.h
deleted file mode 100644
index e13eefef..00000000
--- a/ANDROID_3.4.5/include/linux/ncp_fs.h
+++ /dev/null
@@ -1,146 +0,0 @@
-/*
- *  ncp_fs.h
- *
- *  Copyright (C) 1995, 1996 by Volker Lendecke
- *
- */
-
-#ifndef _LINUX_NCP_FS_H
-#define _LINUX_NCP_FS_H
-
-#include <linux/fs.h>
-#include <linux/in.h>
-#include <linux/types.h>
-#include <linux/magic.h>
-
-#include <linux/ipx.h>
-#include <linux/ncp_no.h>
-
-/*
- * ioctl commands
- */
-
-struct ncp_ioctl_request {
-	unsigned int function;
-	unsigned int size;
-	char __user *data;
-};
-
-struct ncp_fs_info {
-	int version;
-	struct sockaddr_ipx addr;
-	__kernel_uid_t mounted_uid;
-	int connection;		/* Connection number the server assigned us */
-	int buffer_size;	/* The negotiated buffer size, to be
-				   used for read/write requests! */
-
-	int volume_number;
-	__le32 directory_id;
-};
-
-struct ncp_fs_info_v2 {
-	int version;
-	unsigned long mounted_uid;
-	unsigned int connection;
-	unsigned int buffer_size;
-
-	unsigned int volume_number;
-	__le32 directory_id;
-
-	__u32 dummy1;
-	__u32 dummy2;
-	__u32 dummy3;
-};
-
-struct ncp_sign_init
-{
-	char sign_root[8];
-	char sign_last[16];
-};
-
-struct ncp_lock_ioctl
-{
-#define NCP_LOCK_LOG	0
-#define NCP_LOCK_SH	1
-#define NCP_LOCK_EX	2
-#define NCP_LOCK_CLEAR	256
-	int		cmd;
-	int		origin;
-	unsigned int	offset;
-	unsigned int	length;
-#define NCP_LOCK_DEFAULT_TIMEOUT	18
-#define NCP_LOCK_MAX_TIMEOUT		180
-	int		timeout;
-};
-
-struct ncp_setroot_ioctl
-{
-	int		volNumber;
-	int		namespace;
-	__le32		dirEntNum;
-};
-
-struct ncp_objectname_ioctl
-{
-#define NCP_AUTH_NONE	0x00
-#define NCP_AUTH_BIND	0x31
-#define NCP_AUTH_NDS	0x32
-	int		auth_type;
-	size_t		object_name_len;
-	void __user *	object_name;	/* a userspace data, in most cases user name */
-};
-
-struct ncp_privatedata_ioctl
-{
-	size_t		len;
-	void __user *	data;		/* ~1000 for NDS */
-};
-
-/* NLS charsets by ioctl */
-#define NCP_IOCSNAME_LEN 20
-struct ncp_nls_ioctl
-{
-	unsigned char codepage[NCP_IOCSNAME_LEN+1];
-	unsigned char iocharset[NCP_IOCSNAME_LEN+1];
-};
-
-#define	NCP_IOC_NCPREQUEST		_IOR('n', 1, struct ncp_ioctl_request)
-#define	NCP_IOC_GETMOUNTUID		_IOW('n', 2, __kernel_old_uid_t)
-#define NCP_IOC_GETMOUNTUID2		_IOW('n', 2, unsigned long)
-
-#define NCP_IOC_CONN_LOGGED_IN          _IO('n', 3)
-
-#define NCP_GET_FS_INFO_VERSION    (1)
-#define NCP_IOC_GET_FS_INFO             _IOWR('n', 4, struct ncp_fs_info)
-#define NCP_GET_FS_INFO_VERSION_V2 (2)
-#define NCP_IOC_GET_FS_INFO_V2		_IOWR('n', 4, struct ncp_fs_info_v2)
-
-#define NCP_IOC_SIGN_INIT		_IOR('n', 5, struct ncp_sign_init)
-#define NCP_IOC_SIGN_WANTED		_IOR('n', 6, int)
-#define NCP_IOC_SET_SIGN_WANTED		_IOW('n', 6, int)
-
-#define NCP_IOC_LOCKUNLOCK		_IOR('n', 7, struct ncp_lock_ioctl)
-
-#define NCP_IOC_GETROOT			_IOW('n', 8, struct ncp_setroot_ioctl)
-#define NCP_IOC_SETROOT			_IOR('n', 8, struct ncp_setroot_ioctl)
-
-#define NCP_IOC_GETOBJECTNAME		_IOWR('n', 9, struct ncp_objectname_ioctl)
-#define NCP_IOC_SETOBJECTNAME		_IOR('n', 9, struct ncp_objectname_ioctl)
-#define NCP_IOC_GETPRIVATEDATA		_IOWR('n', 10, struct ncp_privatedata_ioctl)
-#define NCP_IOC_SETPRIVATEDATA		_IOR('n', 10, struct ncp_privatedata_ioctl)
-
-#define NCP_IOC_GETCHARSETS		_IOWR('n', 11, struct ncp_nls_ioctl)
-#define NCP_IOC_SETCHARSETS		_IOR('n', 11, struct ncp_nls_ioctl)
-
-#define NCP_IOC_GETDENTRYTTL		_IOW('n', 12, __u32)
-#define NCP_IOC_SETDENTRYTTL		_IOR('n', 12, __u32)
-
-/*
- * The packet size to allocate. One page should be enough.
- */
-#define NCP_PACKET_SIZE 4070
-
-#define NCP_MAXPATHLEN 255
-#define NCP_MAXNAMELEN 14
-
-#endif				/* _LINUX_NCP_FS_H */
diff --git a/ANDROID_3.4.5/include/linux/ncp_mount.h b/ANDROID_3.4.5/include/linux/ncp_mount.h
deleted file mode 100644
index dfcbea2d..00000000
--- a/ANDROID_3.4.5/include/linux/ncp_mount.h
+++ /dev/null
@@ -1,71 +0,0 @@
-/*
- *  ncp_mount.h
- *
- *  Copyright (C) 1995, 1996 by Volker Lendecke
- *
- */
-
-#ifndef _LINUX_NCP_MOUNT_H
-#define _LINUX_NCP_MOUNT_H
-
-#include <linux/types.h>
-#include <linux/ncp.h>
-
-#define NCP_MOUNT_VERSION 3	/* Binary */
-
-/* Values for flags */
-#define NCP_MOUNT_SOFT		0x0001
-#define NCP_MOUNT_INTR		0x0002
-#define NCP_MOUNT_STRONG	0x0004	/* enable delete/rename of r/o files */
-#define NCP_MOUNT_NO_OS2	0x0008	/* do not use OS/2 (LONG) namespace */
-#define NCP_MOUNT_NO_NFS	0x0010	/* do not use NFS namespace */
-#define NCP_MOUNT_EXTRAS	0x0020
-#define NCP_MOUNT_SYMLINKS	0x0040	/* enable symlinks */
-#define NCP_MOUNT_NFS_EXTRAS	0x0080	/* Enable use of NFS NS meta-info */
-
-struct ncp_mount_data {
-	int version;
-	unsigned int ncp_fd;	/* The socket to the ncp port */
-	__kernel_uid_t mounted_uid;	/* Who may umount() this filesystem? */
-	__kernel_pid_t wdog_pid;		/* Who cares for our watchdog packets? */
-
-	unsigned char mounted_vol[NCP_VOLNAME_LEN + 1];
-	unsigned int time_out;	/* How long should I wait after
-				   sending a NCP request? */
-	unsigned int retry_count;	/* And how often should I retry? */
-	unsigned int flags;
-
-	__kernel_uid_t uid;
-	__kernel_gid_t gid;
-	__kernel_mode_t file_mode;
-	__kernel_mode_t dir_mode;
-};
-
-#define NCP_MOUNT_VERSION_V4	(4)	/* Binary or text */
-
-struct ncp_mount_data_v4 {
-	int version;
-	unsigned long flags;	/* NCP_MOUNT_* flags */
-	/* MIPS uses long __kernel_uid_t, but... */
-	/* we neever pass -1, so it is safe */
-	unsigned long mounted_uid;	/* Who may umount() this filesystem? */
-	/* MIPS uses long __kernel_pid_t */
-	long wdog_pid;		/* Who cares for our watchdog packets? */
-
-	unsigned int ncp_fd;	/* The socket to the ncp port */
-	unsigned int time_out;	/* How long should I wait after
-				   sending a NCP request? */
-	unsigned int retry_count;	/* And how often should I retry? */
-
-	/* MIPS uses long __kernel_uid_t... */
-	/* we never pass -1, so it is safe */
-	unsigned long uid;
-	unsigned long gid;
-	/* MIPS uses unsigned long __kernel_mode_t */
-	unsigned long file_mode;
-	unsigned long dir_mode;
-};
-
-#define NCP_MOUNT_VERSION_V5	(5)	/* Text only */
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/ncp_no.h b/ANDROID_3.4.5/include/linux/ncp_no.h
deleted file mode 100644
index cddaa48f..00000000
--- a/ANDROID_3.4.5/include/linux/ncp_no.h
+++ /dev/null
@@ -1,19 +0,0 @@
-#ifndef _NCP_NO
-#define _NCP_NO
-
-/* these define the attribute byte as seen by NCP */
-#define aRONLY			(__cpu_to_le32(1))
-#define aHIDDEN			(__cpu_to_le32(2))
-#define aSYSTEM			(__cpu_to_le32(4))
-#define aEXECUTE		(__cpu_to_le32(8))
-#define aDIR			(__cpu_to_le32(0x10))
-#define aARCH			(__cpu_to_le32(0x20))
-#define aSHARED			(__cpu_to_le32(0x80))
-#define aDONTSUBALLOCATE	(__cpu_to_le32(1L<<11))
-#define aTRANSACTIONAL		(__cpu_to_le32(1L<<12))
-#define aPURGE			(__cpu_to_le32(1L<<16))
-#define aRENAMEINHIBIT		(__cpu_to_le32(1L<<17))
-#define aDELETEINHIBIT		(__cpu_to_le32(1L<<18))
-#define aDONTCOMPRESS		(__cpu_to_le32(1L<<27))
-
-#endif /* _NCP_NO */
diff --git a/ANDROID_3.4.5/include/linux/neighbour.h b/ANDROID_3.4.5/include/linux/neighbour.h
deleted file mode 100644
index b188f68a..00000000
--- a/ANDROID_3.4.5/include/linux/neighbour.h
+++ /dev/null
@@ -1,156 +0,0 @@
-#ifndef __LINUX_NEIGHBOUR_H
-#define __LINUX_NEIGHBOUR_H
-
-#include <linux/types.h>
-#include <linux/netlink.h>
-
-struct ndmsg {
-	__u8		ndm_family;
-	__u8		ndm_pad1;
-	__u16		ndm_pad2;
-	__s32		ndm_ifindex;
-	__u16		ndm_state;
-	__u8		ndm_flags;
-	__u8		ndm_type;
-};
-
-enum {
-	NDA_UNSPEC,
-	NDA_DST,
-	NDA_LLADDR,
-	NDA_CACHEINFO,
-	NDA_PROBES,
-	__NDA_MAX
-};
-
-#define NDA_MAX (__NDA_MAX - 1)
-
-/*
- *	Neighbor Cache Entry Flags
- */
-
-#define NTF_USE		0x01
-#define NTF_PROXY	0x08	/* == ATF_PUBL */
-#define NTF_ROUTER	0x80
-
-/*
- *	Neighbor Cache Entry States.
- */
-
-#define NUD_INCOMPLETE	0x01
-#define NUD_REACHABLE	0x02
-#define NUD_STALE	0x04
-#define NUD_DELAY	0x08
-#define NUD_PROBE	0x10
-#define NUD_FAILED	0x20
-
-/* Dummy states */
-#define NUD_NOARP	0x40
-#define NUD_PERMANENT	0x80
-#define NUD_NONE	0x00
-
-/* NUD_NOARP & NUD_PERMANENT are pseudostates, they never change
-   and make no address resolution or NUD.
-   NUD_PERMANENT is also cannot be deleted by garbage collectors.
- */
-
-struct nda_cacheinfo {
-	__u32		ndm_confirmed;
-	__u32		ndm_used;
-	__u32		ndm_updated;
-	__u32		ndm_refcnt;
-};
-
-/*****************************************************************
- *		Neighbour tables specific messages.
- *
- * To retrieve the neighbour tables send RTM_GETNEIGHTBL with the
- * NLM_F_DUMP flag set. Every neighbour table configuration is
- * spread over multiple messages to avoid running into message
- * size limits on systems with many interfaces. The first message
- * in the sequence transports all not device specific data such as
- * statistics, configuration, and the default parameter set.
- * This message is followed by 0..n messages carrying device
- * specific parameter sets.
- * Although the ordering should be sufficient, NDTA_NAME can be
- * used to identify sequences. The initial message can be identified
- * by checking for NDTA_CONFIG. The device specific messages do
- * not contain this TLV but have NDTPA_IFINDEX set to the
- * corresponding interface index.
- *
- * To change neighbour table attributes, send RTM_SETNEIGHTBL
- * with NDTA_NAME set. Changeable attribute include NDTA_THRESH[1-3],
- * NDTA_GC_INTERVAL, and all TLVs in NDTA_PARMS unless marked
- * otherwise. Device specific parameter sets can be changed by
- * setting NDTPA_IFINDEX to the interface index of the corresponding
- * device.
- ****/
-
-struct ndt_stats {
-	__u64		ndts_allocs;
-	__u64		ndts_destroys;
-	__u64		ndts_hash_grows;
-	__u64		ndts_res_failed;
-	__u64		ndts_lookups;
-	__u64		ndts_hits;
-	__u64		ndts_rcv_probes_mcast;
-	__u64		ndts_rcv_probes_ucast;
-	__u64		ndts_periodic_gc_runs;
-	__u64		ndts_forced_gc_runs;
-};
-
-enum {
-	NDTPA_UNSPEC,
-	NDTPA_IFINDEX,			/* u32, unchangeable */
-	NDTPA_REFCNT,			/* u32, read-only */
-	NDTPA_REACHABLE_TIME,		/* u64, read-only, msecs */
-	NDTPA_BASE_REACHABLE_TIME,	/* u64, msecs */
-	NDTPA_RETRANS_TIME,		/* u64, msecs */
-	NDTPA_GC_STALETIME,		/* u64, msecs */
-	NDTPA_DELAY_PROBE_TIME,		/* u64, msecs */
-	NDTPA_QUEUE_LEN,		/* u32 */
-	NDTPA_APP_PROBES,		/* u32 */
-	NDTPA_UCAST_PROBES,		/* u32 */
-	NDTPA_MCAST_PROBES,		/* u32 */
-	NDTPA_ANYCAST_DELAY,		/* u64, msecs */
-	NDTPA_PROXY_DELAY,		/* u64, msecs */
-	NDTPA_PROXY_QLEN,		/* u32 */
-	NDTPA_LOCKTIME,			/* u64, msecs */
-	NDTPA_QUEUE_LENBYTES,		/* u32 */
-	__NDTPA_MAX
-};
-#define NDTPA_MAX (__NDTPA_MAX - 1)
-
-struct ndtmsg {
-	__u8		ndtm_family;
-	__u8		ndtm_pad1;
-	__u16		ndtm_pad2;
-};
-
-struct ndt_config {
-	__u16		ndtc_key_len;
-	__u16		ndtc_entry_size;
-	__u32		ndtc_entries;
-	__u32		ndtc_last_flush;	/* delta to now in msecs */
-	__u32		ndtc_last_rand;		/* delta to now in msecs */
-	__u32		ndtc_hash_rnd;
-	__u32		ndtc_hash_mask;
-	__u32		ndtc_hash_chain_gc;
-	__u32		ndtc_proxy_qlen;
-};
-
-enum {
-	NDTA_UNSPEC,
-	NDTA_NAME,			/* char *, unchangeable */
-	NDTA_THRESH1,			/* u32 */
-	NDTA_THRESH2,			/* u32 */
-	NDTA_THRESH3,			/* u32 */
-	NDTA_CONFIG,			/* struct ndt_config, read-only */
-	NDTA_PARMS,			/* nested TLV NDTPA_* */
-	NDTA_STATS,			/* struct ndt_stats, read-only */
-	NDTA_GC_INTERVAL,		/* u64, msecs */
-	__NDTA_MAX
-};
-#define NDTA_MAX (__NDTA_MAX - 1)
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/net.h b/ANDROID_3.4.5/include/linux/net.h
deleted file mode 100644
index be60c7f5..00000000
--- a/ANDROID_3.4.5/include/linux/net.h
+++ /dev/null
@@ -1,294 +0,0 @@
-/*
- * NET		An implementation of the SOCKET network access protocol.
- *		This is the master header file for the Linux NET layer,
- *		or, in plain English: the networking handling part of the
- *		kernel.
- *
- * Version:	@(#)net.h	1.0.3	05/25/93
- *
- * Authors:	Orest Zborowski, <obz@Kodak.COM>
- *		Ross Biro
- *		Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
- *
- *		This program is free software; you can redistribute it and/or
- *		modify it under the terms of the GNU General Public License
- *		as published by the Free Software Foundation; either version
- *		2 of the License, or (at your option) any later version.
- */
-#ifndef _LINUX_NET_H
-#define _LINUX_NET_H
-
-#include <linux/socket.h>
-#include <asm/socket.h>
-
-#define NPROTO		AF_MAX
-
-#define SYS_SOCKET	1		/* sys_socket(2)		*/
-#define SYS_BIND	2		/* sys_bind(2)			*/
-#define SYS_CONNECT	3		/* sys_connect(2)		*/
-#define SYS_LISTEN	4		/* sys_listen(2)		*/
-#define SYS_ACCEPT	5		/* sys_accept(2)		*/
-#define SYS_GETSOCKNAME	6		/* sys_getsockname(2)		*/
-#define SYS_GETPEERNAME	7		/* sys_getpeername(2)		*/
-#define SYS_SOCKETPAIR	8		/* sys_socketpair(2)		*/
-#define SYS_SEND	9		/* sys_send(2)			*/
-#define SYS_RECV	10		/* sys_recv(2)			*/
-#define SYS_SENDTO	11		/* sys_sendto(2)		*/
-#define SYS_RECVFROM	12		/* sys_recvfrom(2)		*/
-#define SYS_SHUTDOWN	13		/* sys_shutdown(2)		*/
-#define SYS_SETSOCKOPT	14		/* sys_setsockopt(2)		*/
-#define SYS_GETSOCKOPT	15		/* sys_getsockopt(2)		*/
-#define SYS_SENDMSG	16		/* sys_sendmsg(2)		*/
-#define SYS_RECVMSG	17		/* sys_recvmsg(2)		*/
-#define SYS_ACCEPT4	18		/* sys_accept4(2)		*/
-#define SYS_RECVMMSG	19		/* sys_recvmmsg(2)		*/
-#define SYS_SENDMMSG	20		/* sys_sendmmsg(2)		*/
-
-typedef enum {
-	SS_FREE = 0,			/* not allocated		*/
-	SS_UNCONNECTED,			/* unconnected to any socket	*/
-	SS_CONNECTING,			/* in process of connecting	*/
-	SS_CONNECTED,			/* connected to socket		*/
-	SS_DISCONNECTING		/* in process of disconnecting	*/
-} socket_state;
-
-#define __SO_ACCEPTCON	(1 << 16)	/* performed a listen		*/
-
-#ifdef __KERNEL__
-#include <linux/stringify.h>
-#include <linux/random.h>
-#include <linux/wait.h>
-#include <linux/fcntl.h>	/* For O_CLOEXEC and O_NONBLOCK */
-#include <linux/kmemcheck.h>
-#include <linux/rcupdate.h>
-
-struct poll_table_struct;
-struct pipe_inode_info;
-struct inode;
-struct net;
-
-#define SOCK_ASYNC_NOSPACE	0
-#define SOCK_ASYNC_WAITDATA	1
-#define SOCK_NOSPACE		2
-#define SOCK_PASSCRED		3
-#define SOCK_PASSSEC		4
-
-#ifndef ARCH_HAS_SOCKET_TYPES
-/**
- * enum sock_type - Socket types
- * @SOCK_STREAM: stream (connection) socket
- * @SOCK_DGRAM: datagram (conn.less) socket
- * @SOCK_RAW: raw socket
- * @SOCK_RDM: reliably-delivered message
- * @SOCK_SEQPACKET: sequential packet socket
- * @SOCK_DCCP: Datagram Congestion Control Protocol socket
- * @SOCK_PACKET: linux specific way of getting packets at the dev level.
- *		  For writing rarp and other similar things on the user level.
- *
- * When adding some new socket type please
- * grep ARCH_HAS_SOCKET_TYPE include/asm-* /socket.h, at least MIPS
- * overrides this enum for binary compat reasons.
- */
-enum sock_type {
-	SOCK_STREAM	= 1,
-	SOCK_DGRAM	= 2,
-	SOCK_RAW	= 3,
-	SOCK_RDM	= 4,
-	SOCK_SEQPACKET	= 5,
-	SOCK_DCCP	= 6,
-	SOCK_PACKET	= 10,
-};
-
-#define SOCK_MAX (SOCK_PACKET + 1)
-/* Mask which covers at least up to SOCK_MASK-1.  The
- * remaining bits are used as flags. */
-#define SOCK_TYPE_MASK 0xf
-
-/* Flags for socket, socketpair, accept4 */
-#define SOCK_CLOEXEC	O_CLOEXEC
-#ifndef SOCK_NONBLOCK
-#define SOCK_NONBLOCK	O_NONBLOCK
-#endif
-
-#endif /* ARCH_HAS_SOCKET_TYPES */
-
-enum sock_shutdown_cmd {
-	SHUT_RD		= 0,
-	SHUT_WR		= 1,
-	SHUT_RDWR	= 2,
-};
-
-struct socket_wq {
-	/* Note: wait MUST be first field of socket_wq */
-	wait_queue_head_t	wait;
-	struct fasync_struct	*fasync_list;
-	struct rcu_head		rcu;
-} ____cacheline_aligned_in_smp;
-
-/**
- *  struct socket - general BSD socket
- *  @state: socket state (%SS_CONNECTED, etc)
- *  @type: socket type (%SOCK_STREAM, etc)
- *  @flags: socket flags (%SOCK_ASYNC_NOSPACE, etc)
- *  @ops: protocol specific socket operations
- *  @file: File back pointer for gc
- *  @sk: internal networking protocol agnostic socket representation
- *  @wq: wait queue for several uses
- */
-struct socket {
-	socket_state		state;
-
-	kmemcheck_bitfield_begin(type);
-	short			type;
-	kmemcheck_bitfield_end(type);
-
-	unsigned long		flags;
-
-	struct socket_wq __rcu	*wq;
-
-	struct file		*file;
-	struct sock		*sk;
-	const struct proto_ops	*ops;
-};
-
-struct vm_area_struct;
-struct page;
-struct kiocb;
-struct sockaddr;
-struct msghdr;
-struct module;
-
-struct proto_ops {
-	int		family;
-	struct module	*owner;
-	int		(*release)   (struct socket *sock);
-	int		(*bind)	     (struct socket *sock,
-				      struct sockaddr *myaddr,
-				      int sockaddr_len);
-	int		(*connect)   (struct socket *sock,
-				      struct sockaddr *vaddr,
-				      int sockaddr_len, int flags);
-	int		(*socketpair)(struct socket *sock1,
-				      struct socket *sock2);
-	int		(*accept)    (struct socket *sock,
-				      struct socket *newsock, int flags);
-	int		(*getname)   (struct socket *sock,
-				      struct sockaddr *addr,
-				      int *sockaddr_len, int peer);
-	unsigned int	(*poll)	     (struct file *file, struct socket *sock,
-				      struct poll_table_struct *wait);
-	int		(*ioctl)     (struct socket *sock, unsigned int cmd,
-				      unsigned long arg);
-#ifdef CONFIG_COMPAT
-	int	 	(*compat_ioctl) (struct socket *sock, unsigned int cmd,
-				      unsigned long arg);
-#endif
-	int		(*listen)    (struct socket *sock, int len);
-	int		(*shutdown)  (struct socket *sock, int flags);
-	int		(*setsockopt)(struct socket *sock, int level,
-				      int optname, char __user *optval, unsigned int optlen);
-	int		(*getsockopt)(struct socket *sock, int level,
-				      int optname, char __user *optval, int __user *optlen);
-#ifdef CONFIG_COMPAT
-	int		(*compat_setsockopt)(struct socket *sock, int level,
-				      int optname, char __user *optval, unsigned int optlen);
-	int		(*compat_getsockopt)(struct socket *sock, int level,
-				      int optname, char __user *optval, int __user *optlen);
-#endif
-	int		(*sendmsg)   (struct kiocb *iocb, struct socket *sock,
-				      struct msghdr *m, size_t total_len);
-	int		(*recvmsg)   (struct kiocb *iocb, struct socket *sock,
-				      struct msghdr *m, size_t total_len,
-				      int flags);
-	int		(*mmap)	     (struct file *file, struct socket *sock,
-				      struct vm_area_struct * vma);
-	ssize_t		(*sendpage)  (struct socket *sock, struct page *page,
-				      int offset, size_t size, int flags);
-	ssize_t 	(*splice_read)(struct socket *sock,  loff_t *ppos,
-				       struct pipe_inode_info *pipe, size_t len, unsigned int flags);
-	void		(*set_peek_off)(struct sock *sk, int val);
-};
-
-#define DECLARE_SOCKADDR(type, dst, src)	\
-	type dst = ({ __sockaddr_check_size(sizeof(*dst)); (type) src; })
-
-struct net_proto_family {
-	int		family;
-	int		(*create)(struct net *net, struct socket *sock,
-				  int protocol, int kern);
-	struct module	*owner;
-};
-
-struct iovec;
-struct kvec;
-
-enum {
-	SOCK_WAKE_IO,
-	SOCK_WAKE_WAITD,
-	SOCK_WAKE_SPACE,
-	SOCK_WAKE_URG,
-};
-
-extern int	     sock_wake_async(struct socket *sk, int how, int band);
-extern int	     sock_register(const struct net_proto_family *fam);
-extern void	     sock_unregister(int family);
-extern int	     __sock_create(struct net *net, int family, int type, int proto,
-				 struct socket **res, int kern);
-extern int	     sock_create(int family, int type, int proto,
-				 struct socket **res);
-extern int	     sock_create_kern(int family, int type, int proto,
-				      struct socket **res);
-extern int	     sock_create_lite(int family, int type, int proto,
-				      struct socket **res); 
-extern void	     sock_release(struct socket *sock);
-extern int   	     sock_sendmsg(struct socket *sock, struct msghdr *msg,
-				  size_t len);
-extern int	     sock_recvmsg(struct socket *sock, struct msghdr *msg,
-				  size_t size, int flags);
-extern int 	     sock_map_fd(struct socket *sock, int flags);
-extern struct socket *sockfd_lookup(int fd, int *err);
-#define		     sockfd_put(sock) fput(sock->file)
-extern int	     net_ratelimit(void);
-
-#define net_random()		random32()
-#define net_srandom(seed)	srandom32((__force u32)seed)
-
-extern int   	     kernel_sendmsg(struct socket *sock, struct msghdr *msg,
-				    struct kvec *vec, size_t num, size_t len);
-extern int   	     kernel_recvmsg(struct socket *sock, struct msghdr *msg,
-				    struct kvec *vec, size_t num,
-				    size_t len, int flags);
-
-extern int kernel_bind(struct socket *sock, struct sockaddr *addr,
-		       int addrlen);
-extern int kernel_listen(struct socket *sock, int backlog);
-extern int kernel_accept(struct socket *sock, struct socket **newsock,
-			 int flags);
-extern int kernel_connect(struct socket *sock, struct sockaddr *addr,
-			  int addrlen, int flags);
-extern int kernel_getsockname(struct socket *sock, struct sockaddr *addr,
-			      int *addrlen);
-extern int kernel_getpeername(struct socket *sock, struct sockaddr *addr,
-			      int *addrlen);
-extern int kernel_getsockopt(struct socket *sock, int level, int optname,
-			     char *optval, int *optlen);
-extern int kernel_setsockopt(struct socket *sock, int level, int optname,
-			     char *optval, unsigned int optlen);
-extern int kernel_sendpage(struct socket *sock, struct page *page, int offset,
-			   size_t size, int flags);
-extern int kernel_sock_ioctl(struct socket *sock, int cmd, unsigned long arg);
-extern int kernel_sock_shutdown(struct socket *sock,
-				enum sock_shutdown_cmd how);
-
-#define MODULE_ALIAS_NETPROTO(proto) \
-	MODULE_ALIAS("net-pf-" __stringify(proto))
-
-#define MODULE_ALIAS_NET_PF_PROTO(pf, proto) \
-	MODULE_ALIAS("net-pf-" __stringify(pf) "-proto-" __stringify(proto))
-
-#define MODULE_ALIAS_NET_PF_PROTO_TYPE(pf, proto, type) \
-	MODULE_ALIAS("net-pf-" __stringify(pf) "-proto-" __stringify(proto) \
-		     "-type-" __stringify(type))
-
-#endif /* __KERNEL__ */
-#endif	/* _LINUX_NET_H */
diff --git a/ANDROID_3.4.5/include/linux/net_dropmon.h b/ANDROID_3.4.5/include/linux/net_dropmon.h
deleted file mode 100644
index 2a739462..00000000
--- a/ANDROID_3.4.5/include/linux/net_dropmon.h
+++ /dev/null
@@ -1,64 +0,0 @@
-#ifndef __NET_DROPMON_H
-#define __NET_DROPMON_H
-
-#include <linux/types.h>
-#include <linux/netlink.h>
-
-struct net_dm_drop_point {
-	__u8 pc[8];
-	__u32 count;
-};
-
-#define is_drop_point_hw(x) do {\
-	int ____i, ____j;\
-	for (____i = 0; ____i < 8; i ____i++)\
-		____j |= x[____i];\
-	____j;\
-} while (0)
-
-#define NET_DM_CFG_VERSION  0
-#define NET_DM_CFG_ALERT_COUNT  1
-#define NET_DM_CFG_ALERT_DELAY 2
-#define NET_DM_CFG_MAX 3
-
-struct net_dm_config_entry {
-	__u32 type;
-	__u64 data __attribute__((aligned(8)));
-};
-
-struct net_dm_config_msg {
-	__u32 entries;
-	struct net_dm_config_entry options[0];
-};
-
-struct net_dm_alert_msg {
-	__u32 entries;
-	struct net_dm_drop_point points[0];
-};
-
-struct net_dm_user_msg {
-	union {
-		struct net_dm_config_msg user;
-		struct net_dm_alert_msg alert;
-	} u;
-};
-
-
-/* These are the netlink message types for this protocol */
-
-enum {
-	NET_DM_CMD_UNSPEC = 0,
-	NET_DM_CMD_ALERT,
-	NET_DM_CMD_CONFIG,
-	NET_DM_CMD_START,
-	NET_DM_CMD_STOP,
-	_NET_DM_CMD_MAX,
-};
-
-#define NET_DM_CMD_MAX (_NET_DM_CMD_MAX - 1)
-
-/*
- * Our group identifiers
- */
-#define NET_DM_GRP_ALERT 1
-#endif
diff --git a/ANDROID_3.4.5/include/linux/net_tstamp.h b/ANDROID_3.4.5/include/linux/net_tstamp.h
deleted file mode 100644
index ae5df122..00000000
--- a/ANDROID_3.4.5/include/linux/net_tstamp.h
+++ /dev/null
@@ -1,113 +0,0 @@
-/*
- * Userspace API for hardware time stamping of network packets
- *
- * Copyright (C) 2008,2009 Intel Corporation
- * Author: Patrick Ohly <patrick.ohly@intel.com>
- *
- */
-
-#ifndef _NET_TIMESTAMPING_H
-#define _NET_TIMESTAMPING_H
-
-#include <linux/socket.h>   /* for SO_TIMESTAMPING */
-
-/* SO_TIMESTAMPING gets an integer bit field comprised of these values */
-enum {
-	SOF_TIMESTAMPING_TX_HARDWARE = (1<<0),
-	SOF_TIMESTAMPING_TX_SOFTWARE = (1<<1),
-	SOF_TIMESTAMPING_RX_HARDWARE = (1<<2),
-	SOF_TIMESTAMPING_RX_SOFTWARE = (1<<3),
-	SOF_TIMESTAMPING_SOFTWARE = (1<<4),
-	SOF_TIMESTAMPING_SYS_HARDWARE = (1<<5),
-	SOF_TIMESTAMPING_RAW_HARDWARE = (1<<6),
-	SOF_TIMESTAMPING_MASK =
-	(SOF_TIMESTAMPING_RAW_HARDWARE - 1) |
-	SOF_TIMESTAMPING_RAW_HARDWARE
-};
-
-/**
- * struct hwtstamp_config - %SIOCSHWTSTAMP parameter
- *
- * @flags:	no flags defined right now, must be zero
- * @tx_type:	one of HWTSTAMP_TX_*
- * @rx_type:	one of one of HWTSTAMP_FILTER_*
- *
- * %SIOCSHWTSTAMP expects a &struct ifreq with a ifr_data pointer to
- * this structure. dev_ifsioc() in the kernel takes care of the
- * translation between 32 bit userspace and 64 bit kernel. The
- * structure is intentionally chosen so that it has the same layout on
- * 32 and 64 bit systems, don't break this!
- */
-struct hwtstamp_config {
-	int flags;
-	int tx_type;
-	int rx_filter;
-};
-
-/* possible values for hwtstamp_config->tx_type */
-enum hwtstamp_tx_types {
-	/*
-	 * No outgoing packet will need hardware time stamping;
-	 * should a packet arrive which asks for it, no hardware
-	 * time stamping will be done.
-	 */
-	HWTSTAMP_TX_OFF,
-
-	/*
-	 * Enables hardware time stamping for outgoing packets;
-	 * the sender of the packet decides which are to be
-	 * time stamped by setting %SOF_TIMESTAMPING_TX_SOFTWARE
-	 * before sending the packet.
-	 */
-	HWTSTAMP_TX_ON,
-
-	/*
-	 * Enables time stamping for outgoing packets just as
-	 * HWTSTAMP_TX_ON does, but also enables time stamp insertion
-	 * directly into Sync packets. In this case, transmitted Sync
-	 * packets will not received a time stamp via the socket error
-	 * queue.
-	 */
-	HWTSTAMP_TX_ONESTEP_SYNC,
-};
-
-/* possible values for hwtstamp_config->rx_filter */
-enum hwtstamp_rx_filters {
-	/* time stamp no incoming packet at all */
-	HWTSTAMP_FILTER_NONE,
-
-	/* time stamp any incoming packet */
-	HWTSTAMP_FILTER_ALL,
-
-	/* return value: time stamp all packets requested plus some others */
-	HWTSTAMP_FILTER_SOME,
-
-	/* PTP v1, UDP, any kind of event packet */
-	HWTSTAMP_FILTER_PTP_V1_L4_EVENT,
-	/* PTP v1, UDP, Sync packet */
-	HWTSTAMP_FILTER_PTP_V1_L4_SYNC,
-	/* PTP v1, UDP, Delay_req packet */
-	HWTSTAMP_FILTER_PTP_V1_L4_DELAY_REQ,
-	/* PTP v2, UDP, any kind of event packet */
-	HWTSTAMP_FILTER_PTP_V2_L4_EVENT,
-	/* PTP v2, UDP, Sync packet */
-	HWTSTAMP_FILTER_PTP_V2_L4_SYNC,
-	/* PTP v2, UDP, Delay_req packet */
-	HWTSTAMP_FILTER_PTP_V2_L4_DELAY_REQ,
-
-	/* 802.AS1, Ethernet, any kind of event packet */
-	HWTSTAMP_FILTER_PTP_V2_L2_EVENT,
-	/* 802.AS1, Ethernet, Sync packet */
-	HWTSTAMP_FILTER_PTP_V2_L2_SYNC,
-	/* 802.AS1, Ethernet, Delay_req packet */
-	HWTSTAMP_FILTER_PTP_V2_L2_DELAY_REQ,
-
-	/* PTP v2/802.AS1, any layer, any kind of event packet */
-	HWTSTAMP_FILTER_PTP_V2_EVENT,
-	/* PTP v2/802.AS1, any layer, Sync packet */
-	HWTSTAMP_FILTER_PTP_V2_SYNC,
-	/* PTP v2/802.AS1, any layer, Delay_req packet */
-	HWTSTAMP_FILTER_PTP_V2_DELAY_REQ,
-};
-
-#endif /* _NET_TIMESTAMPING_H */
diff --git a/ANDROID_3.4.5/include/linux/netdev_features.h b/ANDROID_3.4.5/include/linux/netdev_features.h
deleted file mode 100644
index 5ac32123..00000000
--- a/ANDROID_3.4.5/include/linux/netdev_features.h
+++ /dev/null
@@ -1,150 +0,0 @@
-/*
- * Network device features.
- *
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-#ifndef _LINUX_NETDEV_FEATURES_H
-#define _LINUX_NETDEV_FEATURES_H
-
-#include <linux/types.h>
-
-typedef u64 netdev_features_t;
-
-enum {
-	NETIF_F_SG_BIT,			/* Scatter/gather IO. */
-	NETIF_F_IP_CSUM_BIT,		/* Can checksum TCP/UDP over IPv4. */
-	__UNUSED_NETIF_F_1,
-	NETIF_F_HW_CSUM_BIT,		/* Can checksum all the packets. */
-	NETIF_F_IPV6_CSUM_BIT,		/* Can checksum TCP/UDP over IPV6 */
-	NETIF_F_HIGHDMA_BIT,		/* Can DMA to high memory. */
-	NETIF_F_FRAGLIST_BIT,		/* Scatter/gather IO. */
-	NETIF_F_HW_VLAN_TX_BIT,		/* Transmit VLAN hw acceleration */
-	NETIF_F_HW_VLAN_RX_BIT,		/* Receive VLAN hw acceleration */
-	NETIF_F_HW_VLAN_FILTER_BIT,	/* Receive filtering on VLAN */
-	NETIF_F_VLAN_CHALLENGED_BIT,	/* Device cannot handle VLAN packets */
-	NETIF_F_GSO_BIT,		/* Enable software GSO. */
-	NETIF_F_LLTX_BIT,		/* LockLess TX - deprecated. Please */
-					/* do not use LLTX in new drivers */
-	NETIF_F_NETNS_LOCAL_BIT,	/* Does not change network namespaces */
-	NETIF_F_GRO_BIT,		/* Generic receive offload */
-	NETIF_F_LRO_BIT,		/* large receive offload */
-
-	/**/NETIF_F_GSO_SHIFT,		/* keep the order of SKB_GSO_* bits */
-	NETIF_F_TSO_BIT			/* ... TCPv4 segmentation */
-		= NETIF_F_GSO_SHIFT,
-	NETIF_F_UFO_BIT,		/* ... UDPv4 fragmentation */
-	NETIF_F_GSO_ROBUST_BIT,		/* ... ->SKB_GSO_DODGY */
-	NETIF_F_TSO_ECN_BIT,		/* ... TCP ECN support */
-	NETIF_F_TSO6_BIT,		/* ... TCPv6 segmentation */
-	NETIF_F_FSO_BIT,		/* ... FCoE segmentation */
-	NETIF_F_GSO_RESERVED1,		/* ... free (fill GSO_MASK to 8 bits) */
-	/**/NETIF_F_GSO_LAST,		/* [can't be last bit, see GSO_MASK] */
-	NETIF_F_GSO_RESERVED2		/* ... free (fill GSO_MASK to 8 bits) */
-		= NETIF_F_GSO_LAST,
-
-	NETIF_F_FCOE_CRC_BIT,		/* FCoE CRC32 */
-	NETIF_F_SCTP_CSUM_BIT,		/* SCTP checksum offload */
-	NETIF_F_FCOE_MTU_BIT,		/* Supports max FCoE MTU, 2158 bytes*/
-	NETIF_F_NTUPLE_BIT,		/* N-tuple filters supported */
-	NETIF_F_RXHASH_BIT,		/* Receive hashing offload */
-	NETIF_F_RXCSUM_BIT,		/* Receive checksumming offload */
-	NETIF_F_NOCACHE_COPY_BIT,	/* Use no-cache copyfromuser */
-	NETIF_F_LOOPBACK_BIT,		/* Enable loopback */
-	NETIF_F_RXFCS_BIT,		/* Append FCS to skb pkt data */
-	NETIF_F_RXALL_BIT,		/* Receive errored frames too */
-
-	/*
-	 * Add your fresh new feature above and remember to update
-	 * netdev_features_strings[] in net/core/ethtool.c and maybe
-	 * some feature mask #defines below. Please also describe it
-	 * in Documentation/networking/netdev-features.txt.
-	 */
-
-	/**/NETDEV_FEATURE_COUNT
-};
-
-/* copy'n'paste compression ;) */
-#define __NETIF_F_BIT(bit)	((netdev_features_t)1 << (bit))
-#define __NETIF_F(name)		__NETIF_F_BIT(NETIF_F_##name##_BIT)
-
-#define NETIF_F_FCOE_CRC	__NETIF_F(FCOE_CRC)
-#define NETIF_F_FCOE_MTU	__NETIF_F(FCOE_MTU)
-#define NETIF_F_FRAGLIST	__NETIF_F(FRAGLIST)
-#define NETIF_F_FSO		__NETIF_F(FSO)
-#define NETIF_F_GRO		__NETIF_F(GRO)
-#define NETIF_F_GSO		__NETIF_F(GSO)
-#define NETIF_F_GSO_ROBUST	__NETIF_F(GSO_ROBUST)
-#define NETIF_F_HIGHDMA		__NETIF_F(HIGHDMA)
-#define NETIF_F_HW_CSUM		__NETIF_F(HW_CSUM)
-#define NETIF_F_HW_VLAN_FILTER	__NETIF_F(HW_VLAN_FILTER)
-#define NETIF_F_HW_VLAN_RX	__NETIF_F(HW_VLAN_RX)
-#define NETIF_F_HW_VLAN_TX	__NETIF_F(HW_VLAN_TX)
-#define NETIF_F_IP_CSUM		__NETIF_F(IP_CSUM)
-#define NETIF_F_IPV6_CSUM	__NETIF_F(IPV6_CSUM)
-#define NETIF_F_LLTX		__NETIF_F(LLTX)
-#define NETIF_F_LOOPBACK	__NETIF_F(LOOPBACK)
-#define NETIF_F_LRO		__NETIF_F(LRO)
-#define NETIF_F_NETNS_LOCAL	__NETIF_F(NETNS_LOCAL)
-#define NETIF_F_NOCACHE_COPY	__NETIF_F(NOCACHE_COPY)
-#define NETIF_F_NTUPLE		__NETIF_F(NTUPLE)
-#define NETIF_F_RXCSUM		__NETIF_F(RXCSUM)
-#define NETIF_F_RXHASH		__NETIF_F(RXHASH)
-#define NETIF_F_SCTP_CSUM	__NETIF_F(SCTP_CSUM)
-#define NETIF_F_SG		__NETIF_F(SG)
-#define NETIF_F_TSO6		__NETIF_F(TSO6)
-#define NETIF_F_TSO_ECN		__NETIF_F(TSO_ECN)
-#define NETIF_F_TSO		__NETIF_F(TSO)
-#define NETIF_F_UFO		__NETIF_F(UFO)
-#define NETIF_F_VLAN_CHALLENGED	__NETIF_F(VLAN_CHALLENGED)
-#define NETIF_F_RXFCS		__NETIF_F(RXFCS)
-#define NETIF_F_RXALL		__NETIF_F(RXALL)
-
-/* Features valid for ethtool to change */
-/* = all defined minus driver/device-class-related */
-#define NETIF_F_NEVER_CHANGE	(NETIF_F_VLAN_CHALLENGED | \
-				 NETIF_F_LLTX | NETIF_F_NETNS_LOCAL)
-
-/* remember that ((t)1 << t_BITS) is undefined in C99 */
-#define NETIF_F_ETHTOOL_BITS	((__NETIF_F_BIT(NETDEV_FEATURE_COUNT - 1) | \
-		(__NETIF_F_BIT(NETDEV_FEATURE_COUNT - 1) - 1)) & \
-		~NETIF_F_NEVER_CHANGE)
-
-/* Segmentation offload feature mask */
-#define NETIF_F_GSO_MASK	(__NETIF_F_BIT(NETIF_F_GSO_LAST + 1) - \
-		__NETIF_F_BIT(NETIF_F_GSO_SHIFT))
-
-/* List of features with software fallbacks. */
-#define NETIF_F_GSO_SOFTWARE	(NETIF_F_TSO | NETIF_F_TSO_ECN | \
-				 NETIF_F_TSO6 | NETIF_F_UFO)
-
-#define NETIF_F_GEN_CSUM	NETIF_F_HW_CSUM
-#define NETIF_F_V4_CSUM		(NETIF_F_GEN_CSUM | NETIF_F_IP_CSUM)
-#define NETIF_F_V6_CSUM		(NETIF_F_GEN_CSUM | NETIF_F_IPV6_CSUM)
-#define NETIF_F_ALL_CSUM	(NETIF_F_V4_CSUM | NETIF_F_V6_CSUM)
-
-#define NETIF_F_ALL_TSO 	(NETIF_F_TSO | NETIF_F_TSO6 | NETIF_F_TSO_ECN)
-
-#define NETIF_F_ALL_FCOE	(NETIF_F_FCOE_CRC | NETIF_F_FCOE_MTU | \
-				 NETIF_F_FSO)
-
-/*
- * If one device supports one of these features, then enable them
- * for all in netdev_increment_features.
- */
-#define NETIF_F_ONE_FOR_ALL	(NETIF_F_GSO_SOFTWARE | NETIF_F_GSO_ROBUST | \
-				 NETIF_F_SG | NETIF_F_HIGHDMA |		\
-				 NETIF_F_FRAGLIST | NETIF_F_VLAN_CHALLENGED)
-/*
- * If one device doesn't support one of these features, then disable it
- * for all in netdev_increment_features.
- */
-#define NETIF_F_ALL_FOR_ALL	(NETIF_F_NOCACHE_COPY | NETIF_F_FSO)
-
-/* changeable features with no special hardware requirements */
-#define NETIF_F_SOFT_FEATURES	(NETIF_F_GSO | NETIF_F_GRO)
-
-#endif	/* _LINUX_NETDEV_FEATURES_H */
diff --git a/ANDROID_3.4.5/include/linux/netdevice.h b/ANDROID_3.4.5/include/linux/netdevice.h
deleted file mode 100644
index 33900a53..00000000
--- a/ANDROID_3.4.5/include/linux/netdevice.h
+++ /dev/null
@@ -1,2804 +0,0 @@
-/*
- * INET		An implementation of the TCP/IP protocol suite for the LINUX
- *		operating system.  INET is implemented using the  BSD Socket
- *		interface as the means of communication with the user level.
- *
- *		Definitions for the Interfaces handler.
- *
- * Version:	@(#)dev.h	1.0.10	08/12/93
- *
- * Authors:	Ross Biro
- *		Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
- *		Corey Minyard <wf-rch!minyard@relay.EU.net>
- *		Donald J. Becker, <becker@cesdis.gsfc.nasa.gov>
- *		Alan Cox, <alan@lxorguk.ukuu.org.uk>
- *		Bjorn Ekwall. <bj0rn@blox.se>
- *              Pekka Riikonen <priikone@poseidon.pspt.fi>
- *
- *		This program is free software; you can redistribute it and/or
- *		modify it under the terms of the GNU General Public License
- *		as published by the Free Software Foundation; either version
- *		2 of the License, or (at your option) any later version.
- *
- *		Moved to /usr/include/linux for NET3
- */
-#ifndef _LINUX_NETDEVICE_H
-#define _LINUX_NETDEVICE_H
-
-#include <linux/if.h>
-#include <linux/if_ether.h>
-#include <linux/if_packet.h>
-#include <linux/if_link.h>
-
-#ifdef __KERNEL__
-#include <linux/pm_qos.h>
-#include <linux/timer.h>
-#include <linux/bug.h>
-#include <linux/delay.h>
-#include <linux/atomic.h>
-#include <asm/cache.h>
-#include <asm/byteorder.h>
-
-#include <linux/percpu.h>
-#include <linux/rculist.h>
-#include <linux/dmaengine.h>
-#include <linux/workqueue.h>
-#include <linux/dynamic_queue_limits.h>
-
-#include <linux/ethtool.h>
-#include <net/net_namespace.h>
-#include <net/dsa.h>
-#ifdef CONFIG_DCB
-#include <net/dcbnl.h>
-#endif
-#include <net/netprio_cgroup.h>
-
-#include <linux/netdev_features.h>
-
-struct netpoll_info;
-struct device;
-struct phy_device;
-/* 802.11 specific */
-struct wireless_dev;
-					/* source back-compat hooks */
-#define SET_ETHTOOL_OPS(netdev,ops) \
-	( (netdev)->ethtool_ops = (ops) )
-
-/* hardware address assignment types */
-#define NET_ADDR_PERM		0	/* address is permanent (default) */
-#define NET_ADDR_RANDOM		1	/* address is generated randomly */
-#define NET_ADDR_STOLEN		2	/* address is stolen from other device */
-
-/* Backlog congestion levels */
-#define NET_RX_SUCCESS		0	/* keep 'em coming, baby */
-#define NET_RX_DROP		1	/* packet dropped */
-
-/*
- * Transmit return codes: transmit return codes originate from three different
- * namespaces:
- *
- * - qdisc return codes
- * - driver transmit return codes
- * - errno values
- *
- * Drivers are allowed to return any one of those in their hard_start_xmit()
- * function. Real network devices commonly used with qdiscs should only return
- * the driver transmit return codes though - when qdiscs are used, the actual
- * transmission happens asynchronously, so the value is not propagated to
- * higher layers. Virtual network devices transmit synchronously, in this case
- * the driver transmit return codes are consumed by dev_queue_xmit(), all
- * others are propagated to higher layers.
- */
-
-/* qdisc ->enqueue() return codes. */
-#define NET_XMIT_SUCCESS	0x00
-#define NET_XMIT_DROP		0x01	/* skb dropped			*/
-#define NET_XMIT_CN		0x02	/* congestion notification	*/
-#define NET_XMIT_POLICED	0x03	/* skb is shot by police	*/
-#define NET_XMIT_MASK		0x0f	/* qdisc flags in net/sch_generic.h */
-
-/* NET_XMIT_CN is special. It does not guarantee that this packet is lost. It
- * indicates that the device will soon be dropping packets, or already drops
- * some packets of the same priority; prompting us to send less aggressively. */
-#define net_xmit_eval(e)	((e) == NET_XMIT_CN ? 0 : (e))
-#define net_xmit_errno(e)	((e) != NET_XMIT_CN ? -ENOBUFS : 0)
-
-/* Driver transmit return codes */
-#define NETDEV_TX_MASK		0xf0
-
-enum netdev_tx {
-	__NETDEV_TX_MIN	 = INT_MIN,	/* make sure enum is signed */
-	NETDEV_TX_OK	 = 0x00,	/* driver took care of packet */
-	NETDEV_TX_BUSY	 = 0x10,	/* driver tx path was busy*/
-	NETDEV_TX_LOCKED = 0x20,	/* driver tx lock was already taken */
-};
-typedef enum netdev_tx netdev_tx_t;
-
-/*
- * Current order: NETDEV_TX_MASK > NET_XMIT_MASK >= 0 is significant;
- * hard_start_xmit() return < NET_XMIT_MASK means skb was consumed.
- */
-static inline bool dev_xmit_complete(int rc)
-{
-	/*
-	 * Positive cases with an skb consumed by a driver:
-	 * - successful transmission (rc == NETDEV_TX_OK)
-	 * - error while transmitting (rc < 0)
-	 * - error while queueing to a different device (rc & NET_XMIT_MASK)
-	 */
-	if (likely(rc < NET_XMIT_MASK))
-		return true;
-
-	return false;
-}
-
-#endif
-
-#define MAX_ADDR_LEN	32		/* Largest hardware address length */
-
-/* Initial net device group. All devices belong to group 0 by default. */
-#define INIT_NETDEV_GROUP	0
-
-#ifdef  __KERNEL__
-/*
- *	Compute the worst case header length according to the protocols
- *	used.
- */
-
-#if defined(CONFIG_WLAN) || IS_ENABLED(CONFIG_AX25)
-# if defined(CONFIG_MAC80211_MESH)
-#  define LL_MAX_HEADER 128
-# else
-#  define LL_MAX_HEADER 96
-# endif
-#elif IS_ENABLED(CONFIG_TR)
-# define LL_MAX_HEADER 48
-#else
-# define LL_MAX_HEADER 32
-#endif
-
-#if !IS_ENABLED(CONFIG_NET_IPIP) && !IS_ENABLED(CONFIG_NET_IPGRE) && \
-    !IS_ENABLED(CONFIG_IPV6_SIT) && !IS_ENABLED(CONFIG_IPV6_TUNNEL)
-#define MAX_HEADER LL_MAX_HEADER
-#else
-#define MAX_HEADER (LL_MAX_HEADER + 48)
-#endif
-
-/*
- *	Old network device statistics. Fields are native words
- *	(unsigned long) so they can be read and written atomically.
- */
-
-struct net_device_stats {
-	unsigned long	rx_packets;
-	unsigned long	tx_packets;
-	unsigned long	rx_bytes;
-	unsigned long	tx_bytes;
-	unsigned long	rx_errors;
-	unsigned long	tx_errors;
-	unsigned long	rx_dropped;
-	unsigned long	tx_dropped;
-	unsigned long	multicast;
-	unsigned long	collisions;
-	unsigned long	rx_length_errors;
-	unsigned long	rx_over_errors;
-	unsigned long	rx_crc_errors;
-	unsigned long	rx_frame_errors;
-	unsigned long	rx_fifo_errors;
-	unsigned long	rx_missed_errors;
-	unsigned long	tx_aborted_errors;
-	unsigned long	tx_carrier_errors;
-	unsigned long	tx_fifo_errors;
-	unsigned long	tx_heartbeat_errors;
-	unsigned long	tx_window_errors;
-	unsigned long	rx_compressed;
-	unsigned long	tx_compressed;
-};
-
-#endif  /*  __KERNEL__  */
-
-
-/* Media selection options. */
-enum {
-        IF_PORT_UNKNOWN = 0,
-        IF_PORT_10BASE2,
-        IF_PORT_10BASET,
-        IF_PORT_AUI,
-        IF_PORT_100BASET,
-        IF_PORT_100BASETX,
-        IF_PORT_100BASEFX
-};
-
-#ifdef __KERNEL__
-
-#include <linux/cache.h>
-#include <linux/skbuff.h>
-
-#ifdef CONFIG_RPS
-#include <linux/static_key.h>
-extern struct static_key rps_needed;
-#endif
-
-struct neighbour;
-struct neigh_parms;
-struct sk_buff;
-
-struct netdev_hw_addr {
-	struct list_head	list;
-	unsigned char		addr[MAX_ADDR_LEN];
-	unsigned char		type;
-#define NETDEV_HW_ADDR_T_LAN		1
-#define NETDEV_HW_ADDR_T_SAN		2
-#define NETDEV_HW_ADDR_T_SLAVE		3
-#define NETDEV_HW_ADDR_T_UNICAST	4
-#define NETDEV_HW_ADDR_T_MULTICAST	5
-	bool			synced;
-	bool			global_use;
-	int			refcount;
-	struct rcu_head		rcu_head;
-};
-
-struct netdev_hw_addr_list {
-	struct list_head	list;
-	int			count;
-};
-
-#define netdev_hw_addr_list_count(l) ((l)->count)
-#define netdev_hw_addr_list_empty(l) (netdev_hw_addr_list_count(l) == 0)
-#define netdev_hw_addr_list_for_each(ha, l) \
-	list_for_each_entry(ha, &(l)->list, list)
-
-#define netdev_uc_count(dev) netdev_hw_addr_list_count(&(dev)->uc)
-#define netdev_uc_empty(dev) netdev_hw_addr_list_empty(&(dev)->uc)
-#define netdev_for_each_uc_addr(ha, dev) \
-	netdev_hw_addr_list_for_each(ha, &(dev)->uc)
-
-#define netdev_mc_count(dev) netdev_hw_addr_list_count(&(dev)->mc)
-#define netdev_mc_empty(dev) netdev_hw_addr_list_empty(&(dev)->mc)
-#define netdev_for_each_mc_addr(ha, dev) \
-	netdev_hw_addr_list_for_each(ha, &(dev)->mc)
-
-struct hh_cache {
-	u16		hh_len;
-	u16		__pad;
-	seqlock_t	hh_lock;
-
-	/* cached hardware header; allow for machine alignment needs.        */
-#define HH_DATA_MOD	16
-#define HH_DATA_OFF(__len) \
-	(HH_DATA_MOD - (((__len - 1) & (HH_DATA_MOD - 1)) + 1))
-#define HH_DATA_ALIGN(__len) \
-	(((__len)+(HH_DATA_MOD-1))&~(HH_DATA_MOD - 1))
-	unsigned long	hh_data[HH_DATA_ALIGN(LL_MAX_HEADER) / sizeof(long)];
-};
-
-/* Reserve HH_DATA_MOD byte aligned hard_header_len, but at least that much.
- * Alternative is:
- *   dev->hard_header_len ? (dev->hard_header_len +
- *                           (HH_DATA_MOD - 1)) & ~(HH_DATA_MOD - 1) : 0
- *
- * We could use other alignment values, but we must maintain the
- * relationship HH alignment <= LL alignment.
- */
-#define LL_RESERVED_SPACE(dev) \
-	((((dev)->hard_header_len+(dev)->needed_headroom)&~(HH_DATA_MOD - 1)) + HH_DATA_MOD)
-#define LL_RESERVED_SPACE_EXTRA(dev,extra) \
-	((((dev)->hard_header_len+(dev)->needed_headroom+(extra))&~(HH_DATA_MOD - 1)) + HH_DATA_MOD)
-
-struct header_ops {
-	int	(*create) (struct sk_buff *skb, struct net_device *dev,
-			   unsigned short type, const void *daddr,
-			   const void *saddr, unsigned len);
-	int	(*parse)(const struct sk_buff *skb, unsigned char *haddr);
-	int	(*rebuild)(struct sk_buff *skb);
-	int	(*cache)(const struct neighbour *neigh, struct hh_cache *hh, __be16 type);
-	void	(*cache_update)(struct hh_cache *hh,
-				const struct net_device *dev,
-				const unsigned char *haddr);
-};
-
-/* These flag bits are private to the generic network queueing
- * layer, they may not be explicitly referenced by any other
- * code.
- */
-
-enum netdev_state_t {
-	__LINK_STATE_START,
-	__LINK_STATE_PRESENT,
-	__LINK_STATE_NOCARRIER,
-	__LINK_STATE_LINKWATCH_PENDING,
-	__LINK_STATE_DORMANT,
-};
-
-
-/*
- * This structure holds at boot time configured netdevice settings. They
- * are then used in the device probing.
- */
-struct netdev_boot_setup {
-	char name[IFNAMSIZ];
-	struct ifmap map;
-};
-#define NETDEV_BOOT_SETUP_MAX 8
-
-extern int __init netdev_boot_setup(char *str);
-
-/*
- * Structure for NAPI scheduling similar to tasklet but with weighting
- */
-struct napi_struct {
-	/* The poll_list must only be managed by the entity which
-	 * changes the state of the NAPI_STATE_SCHED bit.  This means
-	 * whoever atomically sets that bit can add this napi_struct
-	 * to the per-cpu poll_list, and whoever clears that bit
-	 * can remove from the list right before clearing the bit.
-	 */
-	struct list_head	poll_list;
-
-	unsigned long		state;
-	int			weight;
-	int			(*poll)(struct napi_struct *, int);
-#ifdef CONFIG_NETPOLL
-	spinlock_t		poll_lock;
-	int			poll_owner;
-#endif
-
-	unsigned int		gro_count;
-
-	struct net_device	*dev;
-	struct list_head	dev_list;
-	struct sk_buff		*gro_list;
-	struct sk_buff		*skb;
-};
-
-enum {
-	NAPI_STATE_SCHED,	/* Poll is scheduled */
-	NAPI_STATE_DISABLE,	/* Disable pending */
-	NAPI_STATE_NPSVC,	/* Netpoll - don't dequeue from poll_list */
-};
-
-enum gro_result {
-	GRO_MERGED,
-	GRO_MERGED_FREE,
-	GRO_HELD,
-	GRO_NORMAL,
-	GRO_DROP,
-};
-typedef enum gro_result gro_result_t;
-
-/*
- * enum rx_handler_result - Possible return values for rx_handlers.
- * @RX_HANDLER_CONSUMED: skb was consumed by rx_handler, do not process it
- * further.
- * @RX_HANDLER_ANOTHER: Do another round in receive path. This is indicated in
- * case skb->dev was changed by rx_handler.
- * @RX_HANDLER_EXACT: Force exact delivery, no wildcard.
- * @RX_HANDLER_PASS: Do nothing, passe the skb as if no rx_handler was called.
- *
- * rx_handlers are functions called from inside __netif_receive_skb(), to do
- * special processing of the skb, prior to delivery to protocol handlers.
- *
- * Currently, a net_device can only have a single rx_handler registered. Trying
- * to register a second rx_handler will return -EBUSY.
- *
- * To register a rx_handler on a net_device, use netdev_rx_handler_register().
- * To unregister a rx_handler on a net_device, use
- * netdev_rx_handler_unregister().
- *
- * Upon return, rx_handler is expected to tell __netif_receive_skb() what to
- * do with the skb.
- *
- * If the rx_handler consumed to skb in some way, it should return
- * RX_HANDLER_CONSUMED. This is appropriate when the rx_handler arranged for
- * the skb to be delivered in some other ways.
- *
- * If the rx_handler changed skb->dev, to divert the skb to another
- * net_device, it should return RX_HANDLER_ANOTHER. The rx_handler for the
- * new device will be called if it exists.
- *
- * If the rx_handler consider the skb should be ignored, it should return
- * RX_HANDLER_EXACT. The skb will only be delivered to protocol handlers that
- * are registred on exact device (ptype->dev == skb->dev).
- *
- * If the rx_handler didn't changed skb->dev, but want the skb to be normally
- * delivered, it should return RX_HANDLER_PASS.
- *
- * A device without a registered rx_handler will behave as if rx_handler
- * returned RX_HANDLER_PASS.
- */
-
-enum rx_handler_result {
-	RX_HANDLER_CONSUMED,
-	RX_HANDLER_ANOTHER,
-	RX_HANDLER_EXACT,
-	RX_HANDLER_PASS,
-};
-typedef enum rx_handler_result rx_handler_result_t;
-typedef rx_handler_result_t rx_handler_func_t(struct sk_buff **pskb);
-
-extern void __napi_schedule(struct napi_struct *n);
-
-static inline bool napi_disable_pending(struct napi_struct *n)
-{
-	return test_bit(NAPI_STATE_DISABLE, &n->state);
-}
-
-/**
- *	napi_schedule_prep - check if napi can be scheduled
- *	@n: napi context
- *
- * Test if NAPI routine is already running, and if not mark
- * it as running.  This is used as a condition variable
- * insure only one NAPI poll instance runs.  We also make
- * sure there is no pending NAPI disable.
- */
-static inline bool napi_schedule_prep(struct napi_struct *n)
-{
-	return !napi_disable_pending(n) &&
-		!test_and_set_bit(NAPI_STATE_SCHED, &n->state);
-}
-
-/**
- *	napi_schedule - schedule NAPI poll
- *	@n: napi context
- *
- * Schedule NAPI poll routine to be called if it is not already
- * running.
- */
-static inline void napi_schedule(struct napi_struct *n)
-{
-	if (napi_schedule_prep(n))
-		__napi_schedule(n);
-}
-
-/* Try to reschedule poll. Called by dev->poll() after napi_complete().  */
-static inline bool napi_reschedule(struct napi_struct *napi)
-{
-	if (napi_schedule_prep(napi)) {
-		__napi_schedule(napi);
-		return true;
-	}
-	return false;
-}
-
-/**
- *	napi_complete - NAPI processing complete
- *	@n: napi context
- *
- * Mark NAPI processing as complete.
- */
-extern void __napi_complete(struct napi_struct *n);
-extern void napi_complete(struct napi_struct *n);
-
-/**
- *	napi_disable - prevent NAPI from scheduling
- *	@n: napi context
- *
- * Stop NAPI from being scheduled on this context.
- * Waits till any outstanding processing completes.
- */
-static inline void napi_disable(struct napi_struct *n)
-{
-	set_bit(NAPI_STATE_DISABLE, &n->state);
-	while (test_and_set_bit(NAPI_STATE_SCHED, &n->state))
-		msleep(1);
-	clear_bit(NAPI_STATE_DISABLE, &n->state);
-}
-
-/**
- *	napi_enable - enable NAPI scheduling
- *	@n: napi context
- *
- * Resume NAPI from being scheduled on this context.
- * Must be paired with napi_disable.
- */
-static inline void napi_enable(struct napi_struct *n)
-{
-	BUG_ON(!test_bit(NAPI_STATE_SCHED, &n->state));
-	smp_mb__before_clear_bit();
-	clear_bit(NAPI_STATE_SCHED, &n->state);
-}
-
-#ifdef CONFIG_SMP
-/**
- *	napi_synchronize - wait until NAPI is not running
- *	@n: napi context
- *
- * Wait until NAPI is done being scheduled on this context.
- * Waits till any outstanding processing completes but
- * does not disable future activations.
- */
-static inline void napi_synchronize(const struct napi_struct *n)
-{
-	while (test_bit(NAPI_STATE_SCHED, &n->state))
-		msleep(1);
-}
-#else
-# define napi_synchronize(n)	barrier()
-#endif
-
-enum netdev_queue_state_t {
-	__QUEUE_STATE_DRV_XOFF,
-	__QUEUE_STATE_STACK_XOFF,
-	__QUEUE_STATE_FROZEN,
-#define QUEUE_STATE_ANY_XOFF ((1 << __QUEUE_STATE_DRV_XOFF)		| \
-			      (1 << __QUEUE_STATE_STACK_XOFF))
-#define QUEUE_STATE_ANY_XOFF_OR_FROZEN (QUEUE_STATE_ANY_XOFF		| \
-					(1 << __QUEUE_STATE_FROZEN))
-};
-/*
- * __QUEUE_STATE_DRV_XOFF is used by drivers to stop the transmit queue.  The
- * netif_tx_* functions below are used to manipulate this flag.  The
- * __QUEUE_STATE_STACK_XOFF flag is used by the stack to stop the transmit
- * queue independently.  The netif_xmit_*stopped functions below are called
- * to check if the queue has been stopped by the driver or stack (either
- * of the XOFF bits are set in the state).  Drivers should not need to call
- * netif_xmit*stopped functions, they should only be using netif_tx_*.
- */
-
-struct netdev_queue {
-/*
- * read mostly part
- */
-	struct net_device	*dev;
-	struct Qdisc		*qdisc;
-	struct Qdisc		*qdisc_sleeping;
-#ifdef CONFIG_SYSFS
-	struct kobject		kobj;
-#endif
-#if defined(CONFIG_XPS) && defined(CONFIG_NUMA)
-	int			numa_node;
-#endif
-/*
- * write mostly part
- */
-	spinlock_t		_xmit_lock ____cacheline_aligned_in_smp;
-	int			xmit_lock_owner;
-	/*
-	 * please use this field instead of dev->trans_start
-	 */
-	unsigned long		trans_start;
-
-	/*
-	 * Number of TX timeouts for this queue
-	 * (/sys/class/net/DEV/Q/trans_timeout)
-	 */
-	unsigned long		trans_timeout;
-
-	unsigned long		state;
-
-#ifdef CONFIG_BQL
-	struct dql		dql;
-#endif
-} ____cacheline_aligned_in_smp;
-
-static inline int netdev_queue_numa_node_read(const struct netdev_queue *q)
-{
-#if defined(CONFIG_XPS) && defined(CONFIG_NUMA)
-	return q->numa_node;
-#else
-	return NUMA_NO_NODE;
-#endif
-}
-
-static inline void netdev_queue_numa_node_write(struct netdev_queue *q, int node)
-{
-#if defined(CONFIG_XPS) && defined(CONFIG_NUMA)
-	q->numa_node = node;
-#endif
-}
-
-#ifdef CONFIG_RPS
-/*
- * This structure holds an RPS map which can be of variable length.  The
- * map is an array of CPUs.
- */
-struct rps_map {
-	unsigned int len;
-	struct rcu_head rcu;
-	u16 cpus[0];
-};
-#define RPS_MAP_SIZE(_num) (sizeof(struct rps_map) + ((_num) * sizeof(u16)))
-
-/*
- * The rps_dev_flow structure contains the mapping of a flow to a CPU, the
- * tail pointer for that CPU's input queue at the time of last enqueue, and
- * a hardware filter index.
- */
-struct rps_dev_flow {
-	u16 cpu;
-	u16 filter;
-	unsigned int last_qtail;
-};
-#define RPS_NO_FILTER 0xffff
-
-/*
- * The rps_dev_flow_table structure contains a table of flow mappings.
- */
-struct rps_dev_flow_table {
-	unsigned int mask;
-	struct rcu_head rcu;
-	struct work_struct free_work;
-	struct rps_dev_flow flows[0];
-};
-#define RPS_DEV_FLOW_TABLE_SIZE(_num) (sizeof(struct rps_dev_flow_table) + \
-    ((_num) * sizeof(struct rps_dev_flow)))
-
-/*
- * The rps_sock_flow_table contains mappings of flows to the last CPU
- * on which they were processed by the application (set in recvmsg).
- */
-struct rps_sock_flow_table {
-	unsigned int mask;
-	u16 ents[0];
-};
-#define	RPS_SOCK_FLOW_TABLE_SIZE(_num) (sizeof(struct rps_sock_flow_table) + \
-    ((_num) * sizeof(u16)))
-
-#define RPS_NO_CPU 0xffff
-
-static inline void rps_record_sock_flow(struct rps_sock_flow_table *table,
-					u32 hash)
-{
-	if (table && hash) {
-		unsigned int cpu, index = hash & table->mask;
-
-		/* We only give a hint, preemption can change cpu under us */
-		cpu = raw_smp_processor_id();
-
-		if (table->ents[index] != cpu)
-			table->ents[index] = cpu;
-	}
-}
-
-static inline void rps_reset_sock_flow(struct rps_sock_flow_table *table,
-				       u32 hash)
-{
-	if (table && hash)
-		table->ents[hash & table->mask] = RPS_NO_CPU;
-}
-
-extern struct rps_sock_flow_table __rcu *rps_sock_flow_table;
-
-#ifdef CONFIG_RFS_ACCEL
-extern bool rps_may_expire_flow(struct net_device *dev, u16 rxq_index,
-				u32 flow_id, u16 filter_id);
-#endif
-
-/* This structure contains an instance of an RX queue. */
-struct netdev_rx_queue {
-	struct rps_map __rcu		*rps_map;
-	struct rps_dev_flow_table __rcu	*rps_flow_table;
-	struct kobject			kobj;
-	struct net_device		*dev;
-} ____cacheline_aligned_in_smp;
-#endif /* CONFIG_RPS */
-
-#ifdef CONFIG_XPS
-/*
- * This structure holds an XPS map which can be of variable length.  The
- * map is an array of queues.
- */
-struct xps_map {
-	unsigned int len;
-	unsigned int alloc_len;
-	struct rcu_head rcu;
-	u16 queues[0];
-};
-#define XPS_MAP_SIZE(_num) (sizeof(struct xps_map) + ((_num) * sizeof(u16)))
-#define XPS_MIN_MAP_ALLOC ((L1_CACHE_BYTES - sizeof(struct xps_map))	\
-    / sizeof(u16))
-
-/*
- * This structure holds all XPS maps for device.  Maps are indexed by CPU.
- */
-struct xps_dev_maps {
-	struct rcu_head rcu;
-	struct xps_map __rcu *cpu_map[0];
-};
-#define XPS_DEV_MAPS_SIZE (sizeof(struct xps_dev_maps) +		\
-    (nr_cpu_ids * sizeof(struct xps_map *)))
-#endif /* CONFIG_XPS */
-
-#define TC_MAX_QUEUE	16
-#define TC_BITMASK	15
-/* HW offloaded queuing disciplines txq count and offset maps */
-struct netdev_tc_txq {
-	u16 count;
-	u16 offset;
-};
-
-#if defined(CONFIG_FCOE) || defined(CONFIG_FCOE_MODULE)
-/*
- * This structure is to hold information about the device
- * configured to run FCoE protocol stack.
- */
-struct netdev_fcoe_hbainfo {
-	char	manufacturer[64];
-	char	serial_number[64];
-	char	hardware_version[64];
-	char	driver_version[64];
-	char	optionrom_version[64];
-	char	firmware_version[64];
-	char	model[256];
-	char	model_description[256];
-};
-#endif
-
-/*
- * This structure defines the management hooks for network devices.
- * The following hooks can be defined; unless noted otherwise, they are
- * optional and can be filled with a null pointer.
- *
- * int (*ndo_init)(struct net_device *dev);
- *     This function is called once when network device is registered.
- *     The network device can use this to any late stage initializaton
- *     or semantic validattion. It can fail with an error code which will
- *     be propogated back to register_netdev
- *
- * void (*ndo_uninit)(struct net_device *dev);
- *     This function is called when device is unregistered or when registration
- *     fails. It is not called if init fails.
- *
- * int (*ndo_open)(struct net_device *dev);
- *     This function is called when network device transistions to the up
- *     state.
- *
- * int (*ndo_stop)(struct net_device *dev);
- *     This function is called when network device transistions to the down
- *     state.
- *
- * netdev_tx_t (*ndo_start_xmit)(struct sk_buff *skb,
- *                               struct net_device *dev);
- *	Called when a packet needs to be transmitted.
- *	Must return NETDEV_TX_OK , NETDEV_TX_BUSY.
- *        (can also return NETDEV_TX_LOCKED iff NETIF_F_LLTX)
- *	Required can not be NULL.
- *
- * u16 (*ndo_select_queue)(struct net_device *dev, struct sk_buff *skb);
- *	Called to decide which queue to when device supports multiple
- *	transmit queues.
- *
- * void (*ndo_change_rx_flags)(struct net_device *dev, int flags);
- *	This function is called to allow device receiver to make
- *	changes to configuration when multicast or promiscious is enabled.
- *
- * void (*ndo_set_rx_mode)(struct net_device *dev);
- *	This function is called device changes address list filtering.
- *	If driver handles unicast address filtering, it should set
- *	IFF_UNICAST_FLT to its priv_flags.
- *
- * int (*ndo_set_mac_address)(struct net_device *dev, void *addr);
- *	This function  is called when the Media Access Control address
- *	needs to be changed. If this interface is not defined, the
- *	mac address can not be changed.
- *
- * int (*ndo_validate_addr)(struct net_device *dev);
- *	Test if Media Access Control address is valid for the device.
- *
- * int (*ndo_do_ioctl)(struct net_device *dev, struct ifreq *ifr, int cmd);
- *	Called when a user request an ioctl which can't be handled by
- *	the generic interface code. If not defined ioctl's return
- *	not supported error code.
- *
- * int (*ndo_set_config)(struct net_device *dev, struct ifmap *map);
- *	Used to set network devices bus interface parameters. This interface
- *	is retained for legacy reason, new devices should use the bus
- *	interface (PCI) for low level management.
- *
- * int (*ndo_change_mtu)(struct net_device *dev, int new_mtu);
- *	Called when a user wants to change the Maximum Transfer Unit
- *	of a device. If not defined, any request to change MTU will
- *	will return an error.
- *
- * void (*ndo_tx_timeout)(struct net_device *dev);
- *	Callback uses when the transmitter has not made any progress
- *	for dev->watchdog ticks.
- *
- * struct rtnl_link_stats64* (*ndo_get_stats64)(struct net_device *dev,
- *                      struct rtnl_link_stats64 *storage);
- * struct net_device_stats* (*ndo_get_stats)(struct net_device *dev);
- *	Called when a user wants to get the network device usage
- *	statistics. Drivers must do one of the following:
- *	1. Define @ndo_get_stats64 to fill in a zero-initialised
- *	   rtnl_link_stats64 structure passed by the caller.
- *	2. Define @ndo_get_stats to update a net_device_stats structure
- *	   (which should normally be dev->stats) and return a pointer to
- *	   it. The structure may be changed asynchronously only if each
- *	   field is written atomically.
- *	3. Update dev->stats asynchronously and atomically, and define
- *	   neither operation.
- *
- * int (*ndo_vlan_rx_add_vid)(struct net_device *dev, unsigned short vid);
- *	If device support VLAN filtering (dev->features & NETIF_F_HW_VLAN_FILTER)
- *	this function is called when a VLAN id is registered.
- *
- * int (*ndo_vlan_rx_kill_vid)(struct net_device *dev, unsigned short vid);
- *	If device support VLAN filtering (dev->features & NETIF_F_HW_VLAN_FILTER)
- *	this function is called when a VLAN id is unregistered.
- *
- * void (*ndo_poll_controller)(struct net_device *dev);
- *
- *	SR-IOV management functions.
- * int (*ndo_set_vf_mac)(struct net_device *dev, int vf, u8* mac);
- * int (*ndo_set_vf_vlan)(struct net_device *dev, int vf, u16 vlan, u8 qos);
- * int (*ndo_set_vf_tx_rate)(struct net_device *dev, int vf, int rate);
- * int (*ndo_set_vf_spoofchk)(struct net_device *dev, int vf, bool setting);
- * int (*ndo_get_vf_config)(struct net_device *dev,
- *			    int vf, struct ifla_vf_info *ivf);
- * int (*ndo_set_vf_port)(struct net_device *dev, int vf,
- *			  struct nlattr *port[]);
- * int (*ndo_get_vf_port)(struct net_device *dev, int vf, struct sk_buff *skb);
- * int (*ndo_setup_tc)(struct net_device *dev, u8 tc)
- * 	Called to setup 'tc' number of traffic classes in the net device. This
- * 	is always called from the stack with the rtnl lock held and netif tx
- * 	queues stopped. This allows the netdevice to perform queue management
- * 	safely.
- *
- *	Fiber Channel over Ethernet (FCoE) offload functions.
- * int (*ndo_fcoe_enable)(struct net_device *dev);
- *	Called when the FCoE protocol stack wants to start using LLD for FCoE
- *	so the underlying device can perform whatever needed configuration or
- *	initialization to support acceleration of FCoE traffic.
- *
- * int (*ndo_fcoe_disable)(struct net_device *dev);
- *	Called when the FCoE protocol stack wants to stop using LLD for FCoE
- *	so the underlying device can perform whatever needed clean-ups to
- *	stop supporting acceleration of FCoE traffic.
- *
- * int (*ndo_fcoe_ddp_setup)(struct net_device *dev, u16 xid,
- *			     struct scatterlist *sgl, unsigned int sgc);
- *	Called when the FCoE Initiator wants to initialize an I/O that
- *	is a possible candidate for Direct Data Placement (DDP). The LLD can
- *	perform necessary setup and returns 1 to indicate the device is set up
- *	successfully to perform DDP on this I/O, otherwise this returns 0.
- *
- * int (*ndo_fcoe_ddp_done)(struct net_device *dev,  u16 xid);
- *	Called when the FCoE Initiator/Target is done with the DDPed I/O as
- *	indicated by the FC exchange id 'xid', so the underlying device can
- *	clean up and reuse resources for later DDP requests.
- *
- * int (*ndo_fcoe_ddp_target)(struct net_device *dev, u16 xid,
- *			      struct scatterlist *sgl, unsigned int sgc);
- *	Called when the FCoE Target wants to initialize an I/O that
- *	is a possible candidate for Direct Data Placement (DDP). The LLD can
- *	perform necessary setup and returns 1 to indicate the device is set up
- *	successfully to perform DDP on this I/O, otherwise this returns 0.
- *
- * int (*ndo_fcoe_get_hbainfo)(struct net_device *dev,
- *			       struct netdev_fcoe_hbainfo *hbainfo);
- *	Called when the FCoE Protocol stack wants information on the underlying
- *	device. This information is utilized by the FCoE protocol stack to
- *	register attributes with Fiber Channel management service as per the
- *	FC-GS Fabric Device Management Information(FDMI) specification.
- *
- * int (*ndo_fcoe_get_wwn)(struct net_device *dev, u64 *wwn, int type);
- *	Called when the underlying device wants to override default World Wide
- *	Name (WWN) generation mechanism in FCoE protocol stack to pass its own
- *	World Wide Port Name (WWPN) or World Wide Node Name (WWNN) to the FCoE
- *	protocol stack to use.
- *
- *	RFS acceleration.
- * int (*ndo_rx_flow_steer)(struct net_device *dev, const struct sk_buff *skb,
- *			    u16 rxq_index, u32 flow_id);
- *	Set hardware filter for RFS.  rxq_index is the target queue index;
- *	flow_id is a flow ID to be passed to rps_may_expire_flow() later.
- *	Return the filter ID on success, or a negative error code.
- *
- *	Slave management functions (for bridge, bonding, etc). User should
- *	call netdev_set_master() to set dev->master properly.
- * int (*ndo_add_slave)(struct net_device *dev, struct net_device *slave_dev);
- *	Called to make another netdev an underling.
- *
- * int (*ndo_del_slave)(struct net_device *dev, struct net_device *slave_dev);
- *	Called to release previously enslaved netdev.
- *
- *      Feature/offload setting functions.
- * netdev_features_t (*ndo_fix_features)(struct net_device *dev,
- *		netdev_features_t features);
- *	Adjusts the requested feature flags according to device-specific
- *	constraints, and returns the resulting flags. Must not modify
- *	the device state.
- *
- * int (*ndo_set_features)(struct net_device *dev, netdev_features_t features);
- *	Called to update device configuration to new features. Passed
- *	feature set might be less than what was returned by ndo_fix_features()).
- *	Must return >0 or -errno if it changed dev->features itself.
- *
- */
-struct net_device_ops {
-	int			(*ndo_init)(struct net_device *dev);
-	void			(*ndo_uninit)(struct net_device *dev);
-	int			(*ndo_open)(struct net_device *dev);
-	int			(*ndo_stop)(struct net_device *dev);
-	netdev_tx_t		(*ndo_start_xmit) (struct sk_buff *skb,
-						   struct net_device *dev);
-	u16			(*ndo_select_queue)(struct net_device *dev,
-						    struct sk_buff *skb);
-	void			(*ndo_change_rx_flags)(struct net_device *dev,
-						       int flags);
-	void			(*ndo_set_rx_mode)(struct net_device *dev);
-	int			(*ndo_set_mac_address)(struct net_device *dev,
-						       void *addr);
-	int			(*ndo_validate_addr)(struct net_device *dev);
-	int			(*ndo_do_ioctl)(struct net_device *dev,
-					        struct ifreq *ifr, int cmd);
-	int			(*ndo_set_config)(struct net_device *dev,
-					          struct ifmap *map);
-	int			(*ndo_change_mtu)(struct net_device *dev,
-						  int new_mtu);
-	int			(*ndo_neigh_setup)(struct net_device *dev,
-						   struct neigh_parms *);
-	void			(*ndo_tx_timeout) (struct net_device *dev);
-
-	struct rtnl_link_stats64* (*ndo_get_stats64)(struct net_device *dev,
-						     struct rtnl_link_stats64 *storage);
-	struct net_device_stats* (*ndo_get_stats)(struct net_device *dev);
-
-	int			(*ndo_vlan_rx_add_vid)(struct net_device *dev,
-						       unsigned short vid);
-	int			(*ndo_vlan_rx_kill_vid)(struct net_device *dev,
-						        unsigned short vid);
-#ifdef CONFIG_NET_POLL_CONTROLLER
-	void                    (*ndo_poll_controller)(struct net_device *dev);
-	int			(*ndo_netpoll_setup)(struct net_device *dev,
-						     struct netpoll_info *info);
-	void			(*ndo_netpoll_cleanup)(struct net_device *dev);
-#endif
-	int			(*ndo_set_vf_mac)(struct net_device *dev,
-						  int queue, u8 *mac);
-	int			(*ndo_set_vf_vlan)(struct net_device *dev,
-						   int queue, u16 vlan, u8 qos);
-	int			(*ndo_set_vf_tx_rate)(struct net_device *dev,
-						      int vf, int rate);
-	int			(*ndo_set_vf_spoofchk)(struct net_device *dev,
-						       int vf, bool setting);
-	int			(*ndo_get_vf_config)(struct net_device *dev,
-						     int vf,
-						     struct ifla_vf_info *ivf);
-	int			(*ndo_set_vf_port)(struct net_device *dev,
-						   int vf,
-						   struct nlattr *port[]);
-	int			(*ndo_get_vf_port)(struct net_device *dev,
-						   int vf, struct sk_buff *skb);
-	int			(*ndo_setup_tc)(struct net_device *dev, u8 tc);
-#if IS_ENABLED(CONFIG_FCOE)
-	int			(*ndo_fcoe_enable)(struct net_device *dev);
-	int			(*ndo_fcoe_disable)(struct net_device *dev);
-	int			(*ndo_fcoe_ddp_setup)(struct net_device *dev,
-						      u16 xid,
-						      struct scatterlist *sgl,
-						      unsigned int sgc);
-	int			(*ndo_fcoe_ddp_done)(struct net_device *dev,
-						     u16 xid);
-	int			(*ndo_fcoe_ddp_target)(struct net_device *dev,
-						       u16 xid,
-						       struct scatterlist *sgl,
-						       unsigned int sgc);
-	int			(*ndo_fcoe_get_hbainfo)(struct net_device *dev,
-							struct netdev_fcoe_hbainfo *hbainfo);
-#endif
-
-#if IS_ENABLED(CONFIG_LIBFCOE)
-#define NETDEV_FCOE_WWNN 0
-#define NETDEV_FCOE_WWPN 1
-	int			(*ndo_fcoe_get_wwn)(struct net_device *dev,
-						    u64 *wwn, int type);
-#endif
-
-#ifdef CONFIG_RFS_ACCEL
-	int			(*ndo_rx_flow_steer)(struct net_device *dev,
-						     const struct sk_buff *skb,
-						     u16 rxq_index,
-						     u32 flow_id);
-#endif
-	int			(*ndo_add_slave)(struct net_device *dev,
-						 struct net_device *slave_dev);
-	int			(*ndo_del_slave)(struct net_device *dev,
-						 struct net_device *slave_dev);
-	netdev_features_t	(*ndo_fix_features)(struct net_device *dev,
-						    netdev_features_t features);
-	int			(*ndo_set_features)(struct net_device *dev,
-						    netdev_features_t features);
-	int			(*ndo_neigh_construct)(struct neighbour *n);
-	void			(*ndo_neigh_destroy)(struct neighbour *n);
-};
-
-/*
- *	The DEVICE structure.
- *	Actually, this whole structure is a big mistake.  It mixes I/O
- *	data with strictly "high-level" data, and it has to know about
- *	almost every data structure used in the INET module.
- *
- *	FIXME: cleanup struct net_device such that network protocol info
- *	moves out.
- */
-
-struct net_device {
-
-	/*
-	 * This is the first field of the "visible" part of this structure
-	 * (i.e. as seen by users in the "Space.c" file).  It is the name
-	 * of the interface.
-	 */
-	char			name[IFNAMSIZ];
-
-	struct pm_qos_request	pm_qos_req;
-
-	/* device name hash chain */
-	struct hlist_node	name_hlist;
-	/* snmp alias */
-	char 			*ifalias;
-
-	/*
-	 *	I/O specific fields
-	 *	FIXME: Merge these and struct ifmap into one
-	 */
-	unsigned long		mem_end;	/* shared mem end	*/
-	unsigned long		mem_start;	/* shared mem start	*/
-	unsigned long		base_addr;	/* device I/O address	*/
-	unsigned int		irq;		/* device IRQ number	*/
-
-	/*
-	 *	Some hardware also needs these fields, but they are not
-	 *	part of the usual set specified in Space.c.
-	 */
-
-	unsigned long		state;
-
-	struct list_head	dev_list;
-	struct list_head	napi_list;
-	struct list_head	unreg_list;
-
-	/* currently active device features */
-	netdev_features_t	features;
-	/* user-changeable features */
-	netdev_features_t	hw_features;
-	/* user-requested features */
-	netdev_features_t	wanted_features;
-	/* mask of features inheritable by VLAN devices */
-	netdev_features_t	vlan_features;
-
-	/* Interface index. Unique device identifier	*/
-	int			ifindex;
-	int			iflink;
-
-	struct net_device_stats	stats;
-	atomic_long_t		rx_dropped; /* dropped packets by core network
-					     * Do not use this in drivers.
-					     */
-
-#ifdef CONFIG_WIRELESS_EXT
-	/* List of functions to handle Wireless Extensions (instead of ioctl).
-	 * See <net/iw_handler.h> for details. Jean II */
-	const struct iw_handler_def *	wireless_handlers;
-	/* Instance data managed by the core of Wireless Extensions. */
-	struct iw_public_data *	wireless_data;
-#endif
-	/* Management operations */
-	const struct net_device_ops *netdev_ops;
-	const struct ethtool_ops *ethtool_ops;
-
-	/* Hardware header description */
-	const struct header_ops *header_ops;
-
-	unsigned int		flags;	/* interface flags (a la BSD)	*/
-	unsigned int		priv_flags; /* Like 'flags' but invisible to userspace.
-					     * See if.h for definitions. */
-	unsigned short		gflags;
-	unsigned short		padded;	/* How much padding added by alloc_netdev() */
-
-	unsigned char		operstate; /* RFC2863 operstate */
-	unsigned char		link_mode; /* mapping policy to operstate */
-
-	unsigned char		if_port;	/* Selectable AUI, TP,..*/
-	unsigned char		dma;		/* DMA channel		*/
-
-	unsigned int		mtu;	/* interface MTU value		*/
-	unsigned short		type;	/* interface hardware type	*/
-	unsigned short		hard_header_len;	/* hardware hdr length	*/
-
-	/* extra head- and tailroom the hardware may need, but not in all cases
-	 * can this be guaranteed, especially tailroom. Some cases also use
-	 * LL_MAX_HEADER instead to allocate the skb.
-	 */
-	unsigned short		needed_headroom;
-	unsigned short		needed_tailroom;
-
-	/* Interface address info. */
-	unsigned char		perm_addr[MAX_ADDR_LEN]; /* permanent hw address */
-	unsigned char		addr_assign_type; /* hw address assignment type */
-	unsigned char		addr_len;	/* hardware address length	*/
-	unsigned char		neigh_priv_len;
-	unsigned short          dev_id;		/* for shared network cards */
-
-	spinlock_t		addr_list_lock;
-	struct netdev_hw_addr_list	uc;	/* Unicast mac addresses */
-	struct netdev_hw_addr_list	mc;	/* Multicast mac addresses */
-	bool			uc_promisc;
-	unsigned int		promiscuity;
-	unsigned int		allmulti;
-
-
-	/* Protocol specific pointers */
-
-#if IS_ENABLED(CONFIG_VLAN_8021Q)
-	struct vlan_info __rcu	*vlan_info;	/* VLAN info */
-#endif
-#if IS_ENABLED(CONFIG_NET_DSA)
-	struct dsa_switch_tree	*dsa_ptr;	/* dsa specific data */
-#endif
-	void 			*atalk_ptr;	/* AppleTalk link 	*/
-	struct in_device __rcu	*ip_ptr;	/* IPv4 specific data	*/
-	struct dn_dev __rcu     *dn_ptr;        /* DECnet specific data */
-	struct inet6_dev __rcu	*ip6_ptr;       /* IPv6 specific data */
-	void			*ec_ptr;	/* Econet specific data	*/
-	void			*ax25_ptr;	/* AX.25 specific data */
-	struct wireless_dev	*ieee80211_ptr;	/* IEEE 802.11 specific data,
-						   assign before registering */
-
-/*
- * Cache lines mostly used on receive path (including eth_type_trans())
- */
-	unsigned long		last_rx;	/* Time of last Rx
-						 * This should not be set in
-						 * drivers, unless really needed,
-						 * because network stack (bonding)
-						 * use it if/when necessary, to
-						 * avoid dirtying this cache line.
-						 */
-
-	struct net_device	*master; /* Pointer to master device of a group,
-					  * which this device is member of.
-					  */
-
-	/* Interface address info used in eth_type_trans() */
-	unsigned char		*dev_addr;	/* hw address, (before bcast
-						   because most packets are
-						   unicast) */
-
-	struct netdev_hw_addr_list	dev_addrs; /* list of device
-						      hw addresses */
-
-	unsigned char		broadcast[MAX_ADDR_LEN];	/* hw bcast add	*/
-
-#ifdef CONFIG_SYSFS
-	struct kset		*queues_kset;
-#endif
-
-#ifdef CONFIG_RPS
-	struct netdev_rx_queue	*_rx;
-
-	/* Number of RX queues allocated at register_netdev() time */
-	unsigned int		num_rx_queues;
-
-	/* Number of RX queues currently active in device */
-	unsigned int		real_num_rx_queues;
-
-#ifdef CONFIG_RFS_ACCEL
-	/* CPU reverse-mapping for RX completion interrupts, indexed
-	 * by RX queue number.  Assigned by driver.  This must only be
-	 * set if the ndo_rx_flow_steer operation is defined. */
-	struct cpu_rmap		*rx_cpu_rmap;
-#endif
-#endif
-
-	rx_handler_func_t __rcu	*rx_handler;
-	void __rcu		*rx_handler_data;
-
-	struct netdev_queue __rcu *ingress_queue;
-
-/*
- * Cache lines mostly used on transmit path
- */
-	struct netdev_queue	*_tx ____cacheline_aligned_in_smp;
-
-	/* Number of TX queues allocated at alloc_netdev_mq() time  */
-	unsigned int		num_tx_queues;
-
-	/* Number of TX queues currently active in device  */
-	unsigned int		real_num_tx_queues;
-
-	/* root qdisc from userspace point of view */
-	struct Qdisc		*qdisc;
-
-	unsigned long		tx_queue_len;	/* Max frames per queue allowed */
-	spinlock_t		tx_global_lock;
-
-#ifdef CONFIG_XPS
-	struct xps_dev_maps __rcu *xps_maps;
-#endif
-
-	/* These may be needed for future network-power-down code. */
-
-	/*
-	 * trans_start here is expensive for high speed devices on SMP,
-	 * please use netdev_queue->trans_start instead.
-	 */
-	unsigned long		trans_start;	/* Time (in jiffies) of last Tx	*/
-
-	int			watchdog_timeo; /* used by dev_watchdog() */
-	struct timer_list	watchdog_timer;
-
-	/* Number of references to this device */
-	int __percpu		*pcpu_refcnt;
-
-	/* delayed register/unregister */
-	struct list_head	todo_list;
-	/* device index hash chain */
-	struct hlist_node	index_hlist;
-
-	struct list_head	link_watch_list;
-
-	/* register/unregister state machine */
-	enum { NETREG_UNINITIALIZED=0,
-	       NETREG_REGISTERED,	/* completed register_netdevice */
-	       NETREG_UNREGISTERING,	/* called unregister_netdevice */
-	       NETREG_UNREGISTERED,	/* completed unregister todo */
-	       NETREG_RELEASED,		/* called free_netdev */
-	       NETREG_DUMMY,		/* dummy device for NAPI poll */
-	} reg_state:8;
-
-	bool dismantle; /* device is going do be freed */
-
-	enum {
-		RTNL_LINK_INITIALIZED,
-		RTNL_LINK_INITIALIZING,
-	} rtnl_link_state:16;
-
-	/* Called from unregister, can be used to call free_netdev */
-	void (*destructor)(struct net_device *dev);
-
-#ifdef CONFIG_NETPOLL
-	struct netpoll_info	*npinfo;
-#endif
-
-#ifdef CONFIG_NET_NS
-	/* Network namespace this network device is inside */
-	struct net		*nd_net;
-#endif
-
-	/* mid-layer private */
-	union {
-		void				*ml_priv;
-		struct pcpu_lstats __percpu	*lstats; /* loopback stats */
-		struct pcpu_tstats __percpu	*tstats; /* tunnel stats */
-		struct pcpu_dstats __percpu	*dstats; /* dummy stats */
-	};
-	/* GARP */
-	struct garp_port __rcu	*garp_port;
-
-	/* class/net/name entry */
-	struct device		dev;
-	/* space for optional device, statistics, and wireless sysfs groups */
-	const struct attribute_group *sysfs_groups[4];
-
-	/* rtnetlink link ops */
-	const struct rtnl_link_ops *rtnl_link_ops;
-
-	/* for setting kernel sock attribute on TCP connection setup */
-#define GSO_MAX_SIZE		65536
-	unsigned int		gso_max_size;
-
-#ifdef CONFIG_DCB
-	/* Data Center Bridging netlink ops */
-	const struct dcbnl_rtnl_ops *dcbnl_ops;
-#endif
-	u8 num_tc;
-	struct netdev_tc_txq tc_to_txq[TC_MAX_QUEUE];
-	u8 prio_tc_map[TC_BITMASK + 1];
-
-#if IS_ENABLED(CONFIG_FCOE)
-	/* max exchange id for FCoE LRO by ddp */
-	unsigned int		fcoe_ddp_xid;
-#endif
-#if IS_ENABLED(CONFIG_NETPRIO_CGROUP)
-	struct netprio_map __rcu *priomap;
-#endif
-	/* phy device may attach itself for hardware timestamping */
-	struct phy_device *phydev;
-
-	/* group the device belongs to */
-	int group;
-};
-#define to_net_dev(d) container_of(d, struct net_device, dev)
-
-#define	NETDEV_ALIGN		32
-
-static inline
-int netdev_get_prio_tc_map(const struct net_device *dev, u32 prio)
-{
-	return dev->prio_tc_map[prio & TC_BITMASK];
-}
-
-static inline
-int netdev_set_prio_tc_map(struct net_device *dev, u8 prio, u8 tc)
-{
-	if (tc >= dev->num_tc)
-		return -EINVAL;
-
-	dev->prio_tc_map[prio & TC_BITMASK] = tc & TC_BITMASK;
-	return 0;
-}
-
-static inline
-void netdev_reset_tc(struct net_device *dev)
-{
-	dev->num_tc = 0;
-	memset(dev->tc_to_txq, 0, sizeof(dev->tc_to_txq));
-	memset(dev->prio_tc_map, 0, sizeof(dev->prio_tc_map));
-}
-
-static inline
-int netdev_set_tc_queue(struct net_device *dev, u8 tc, u16 count, u16 offset)
-{
-	if (tc >= dev->num_tc)
-		return -EINVAL;
-
-	dev->tc_to_txq[tc].count = count;
-	dev->tc_to_txq[tc].offset = offset;
-	return 0;
-}
-
-static inline
-int netdev_set_num_tc(struct net_device *dev, u8 num_tc)
-{
-	if (num_tc > TC_MAX_QUEUE)
-		return -EINVAL;
-
-	dev->num_tc = num_tc;
-	return 0;
-}
-
-static inline
-int netdev_get_num_tc(struct net_device *dev)
-{
-	return dev->num_tc;
-}
-
-static inline
-struct netdev_queue *netdev_get_tx_queue(const struct net_device *dev,
-					 unsigned int index)
-{
-	return &dev->_tx[index];
-}
-
-static inline void netdev_for_each_tx_queue(struct net_device *dev,
-					    void (*f)(struct net_device *,
-						      struct netdev_queue *,
-						      void *),
-					    void *arg)
-{
-	unsigned int i;
-
-	for (i = 0; i < dev->num_tx_queues; i++)
-		f(dev, &dev->_tx[i], arg);
-}
-
-/*
- * Net namespace inlines
- */
-static inline
-struct net *dev_net(const struct net_device *dev)
-{
-	return read_pnet(&dev->nd_net);
-}
-
-static inline
-void dev_net_set(struct net_device *dev, struct net *net)
-{
-#ifdef CONFIG_NET_NS
-	release_net(dev->nd_net);
-	dev->nd_net = hold_net(net);
-#endif
-}
-
-static inline bool netdev_uses_dsa_tags(struct net_device *dev)
-{
-#ifdef CONFIG_NET_DSA_TAG_DSA
-	if (dev->dsa_ptr != NULL)
-		return dsa_uses_dsa_tags(dev->dsa_ptr);
-#endif
-
-	return 0;
-}
-
-static inline bool netdev_uses_trailer_tags(struct net_device *dev)
-{
-#ifdef CONFIG_NET_DSA_TAG_TRAILER
-	if (dev->dsa_ptr != NULL)
-		return dsa_uses_trailer_tags(dev->dsa_ptr);
-#endif
-
-	return 0;
-}
-
-/**
- *	netdev_priv - access network device private data
- *	@dev: network device
- *
- * Get network device private data
- */
-static inline void *netdev_priv(const struct net_device *dev)
-{
-	return (char *)dev + ALIGN(sizeof(struct net_device), NETDEV_ALIGN);
-}
-
-/* Set the sysfs physical device reference for the network logical device
- * if set prior to registration will cause a symlink during initialization.
- */
-#define SET_NETDEV_DEV(net, pdev)	((net)->dev.parent = (pdev))
-
-/* Set the sysfs device type for the network logical device to allow
- * fin grained indentification of different network device types. For
- * example Ethernet, Wirelss LAN, Bluetooth, WiMAX etc.
- */
-#define SET_NETDEV_DEVTYPE(net, devtype)	((net)->dev.type = (devtype))
-
-/**
- *	netif_napi_add - initialize a napi context
- *	@dev:  network device
- *	@napi: napi context
- *	@poll: polling function
- *	@weight: default weight
- *
- * netif_napi_add() must be used to initialize a napi context prior to calling
- * *any* of the other napi related functions.
- */
-void netif_napi_add(struct net_device *dev, struct napi_struct *napi,
-		    int (*poll)(struct napi_struct *, int), int weight);
-
-/**
- *  netif_napi_del - remove a napi context
- *  @napi: napi context
- *
- *  netif_napi_del() removes a napi context from the network device napi list
- */
-void netif_napi_del(struct napi_struct *napi);
-
-struct napi_gro_cb {
-	/* Virtual address of skb_shinfo(skb)->frags[0].page + offset. */
-	void *frag0;
-
-	/* Length of frag0. */
-	unsigned int frag0_len;
-
-	/* This indicates where we are processing relative to skb->data. */
-	int data_offset;
-
-	/* This is non-zero if the packet may be of the same flow. */
-	int same_flow;
-
-	/* This is non-zero if the packet cannot be merged with the new skb. */
-	int flush;
-
-	/* Number of segments aggregated. */
-	int count;
-
-	/* Free the skb? */
-	int free;
-};
-
-#define NAPI_GRO_CB(skb) ((struct napi_gro_cb *)(skb)->cb)
-
-struct packet_type {
-	__be16			type;	/* This is really htons(ether_type). */
-	struct net_device	*dev;	/* NULL is wildcarded here	     */
-	int			(*func) (struct sk_buff *,
-					 struct net_device *,
-					 struct packet_type *,
-					 struct net_device *);
-	struct sk_buff		*(*gso_segment)(struct sk_buff *skb,
-						netdev_features_t features);
-	int			(*gso_send_check)(struct sk_buff *skb);
-	struct sk_buff		**(*gro_receive)(struct sk_buff **head,
-					       struct sk_buff *skb);
-	int			(*gro_complete)(struct sk_buff *skb);
-	void			*af_packet_priv;
-	struct list_head	list;
-};
-
-#include <linux/notifier.h>
-
-/* netdevice notifier chain. Please remember to update the rtnetlink
- * notification exclusion list in rtnetlink_event() when adding new
- * types.
- */
-#define NETDEV_UP	0x0001	/* For now you can't veto a device up/down */
-#define NETDEV_DOWN	0x0002
-#define NETDEV_REBOOT	0x0003	/* Tell a protocol stack a network interface
-				   detected a hardware crash and restarted
-				   - we can use this eg to kick tcp sessions
-				   once done */
-#define NETDEV_CHANGE	0x0004	/* Notify device state change */
-#define NETDEV_REGISTER 0x0005
-#define NETDEV_UNREGISTER	0x0006
-#define NETDEV_CHANGEMTU	0x0007
-#define NETDEV_CHANGEADDR	0x0008
-#define NETDEV_GOING_DOWN	0x0009
-#define NETDEV_CHANGENAME	0x000A
-#define NETDEV_FEAT_CHANGE	0x000B
-#define NETDEV_BONDING_FAILOVER 0x000C
-#define NETDEV_PRE_UP		0x000D
-#define NETDEV_PRE_TYPE_CHANGE	0x000E
-#define NETDEV_POST_TYPE_CHANGE	0x000F
-#define NETDEV_POST_INIT	0x0010
-#define NETDEV_UNREGISTER_BATCH 0x0011
-#define NETDEV_RELEASE		0x0012
-#define NETDEV_NOTIFY_PEERS	0x0013
-#define NETDEV_JOIN		0x0014
-
-extern int register_netdevice_notifier(struct notifier_block *nb);
-extern int unregister_netdevice_notifier(struct notifier_block *nb);
-extern int call_netdevice_notifiers(unsigned long val, struct net_device *dev);
-
-
-extern rwlock_t				dev_base_lock;		/* Device list lock */
-
-
-#define for_each_netdev(net, d)		\
-		list_for_each_entry(d, &(net)->dev_base_head, dev_list)
-#define for_each_netdev_reverse(net, d)	\
-		list_for_each_entry_reverse(d, &(net)->dev_base_head, dev_list)
-#define for_each_netdev_rcu(net, d)		\
-		list_for_each_entry_rcu(d, &(net)->dev_base_head, dev_list)
-#define for_each_netdev_safe(net, d, n)	\
-		list_for_each_entry_safe(d, n, &(net)->dev_base_head, dev_list)
-#define for_each_netdev_continue(net, d)		\
-		list_for_each_entry_continue(d, &(net)->dev_base_head, dev_list)
-#define for_each_netdev_continue_rcu(net, d)		\
-	list_for_each_entry_continue_rcu(d, &(net)->dev_base_head, dev_list)
-#define net_device_entry(lh)	list_entry(lh, struct net_device, dev_list)
-
-static inline struct net_device *next_net_device(struct net_device *dev)
-{
-	struct list_head *lh;
-	struct net *net;
-
-	net = dev_net(dev);
-	lh = dev->dev_list.next;
-	return lh == &net->dev_base_head ? NULL : net_device_entry(lh);
-}
-
-static inline struct net_device *next_net_device_rcu(struct net_device *dev)
-{
-	struct list_head *lh;
-	struct net *net;
-
-	net = dev_net(dev);
-	lh = rcu_dereference(list_next_rcu(&dev->dev_list));
-	return lh == &net->dev_base_head ? NULL : net_device_entry(lh);
-}
-
-static inline struct net_device *first_net_device(struct net *net)
-{
-	return list_empty(&net->dev_base_head) ? NULL :
-		net_device_entry(net->dev_base_head.next);
-}
-
-static inline struct net_device *first_net_device_rcu(struct net *net)
-{
-	struct list_head *lh = rcu_dereference(list_next_rcu(&net->dev_base_head));
-
-	return lh == &net->dev_base_head ? NULL : net_device_entry(lh);
-}
-
-extern int 			netdev_boot_setup_check(struct net_device *dev);
-extern unsigned long		netdev_boot_base(const char *prefix, int unit);
-extern struct net_device *dev_getbyhwaddr_rcu(struct net *net, unsigned short type,
-					      const char *hwaddr);
-extern struct net_device *dev_getfirstbyhwtype(struct net *net, unsigned short type);
-extern struct net_device *__dev_getfirstbyhwtype(struct net *net, unsigned short type);
-extern void		dev_add_pack(struct packet_type *pt);
-extern void		dev_remove_pack(struct packet_type *pt);
-extern void		__dev_remove_pack(struct packet_type *pt);
-
-extern struct net_device	*dev_get_by_flags_rcu(struct net *net, unsigned short flags,
-						      unsigned short mask);
-extern struct net_device	*dev_get_by_name(struct net *net, const char *name);
-extern struct net_device	*dev_get_by_name_rcu(struct net *net, const char *name);
-extern struct net_device	*__dev_get_by_name(struct net *net, const char *name);
-extern int		dev_alloc_name(struct net_device *dev, const char *name);
-extern int		dev_open(struct net_device *dev);
-extern int		dev_close(struct net_device *dev);
-extern void		dev_disable_lro(struct net_device *dev);
-extern int		dev_queue_xmit(struct sk_buff *skb);
-extern int		register_netdevice(struct net_device *dev);
-extern void		unregister_netdevice_queue(struct net_device *dev,
-						   struct list_head *head);
-extern void		unregister_netdevice_many(struct list_head *head);
-static inline void unregister_netdevice(struct net_device *dev)
-{
-	unregister_netdevice_queue(dev, NULL);
-}
-
-extern int 		netdev_refcnt_read(const struct net_device *dev);
-extern void		free_netdev(struct net_device *dev);
-extern void		synchronize_net(void);
-extern int		init_dummy_netdev(struct net_device *dev);
-extern void		netdev_resync_ops(struct net_device *dev);
-
-extern struct net_device	*dev_get_by_index(struct net *net, int ifindex);
-extern struct net_device	*__dev_get_by_index(struct net *net, int ifindex);
-extern struct net_device	*dev_get_by_index_rcu(struct net *net, int ifindex);
-extern int		dev_restart(struct net_device *dev);
-#ifdef CONFIG_NETPOLL_TRAP
-extern int		netpoll_trap(void);
-#endif
-extern int	       skb_gro_receive(struct sk_buff **head,
-				       struct sk_buff *skb);
-extern void	       skb_gro_reset_offset(struct sk_buff *skb);
-
-static inline unsigned int skb_gro_offset(const struct sk_buff *skb)
-{
-	return NAPI_GRO_CB(skb)->data_offset;
-}
-
-static inline unsigned int skb_gro_len(const struct sk_buff *skb)
-{
-	return skb->len - NAPI_GRO_CB(skb)->data_offset;
-}
-
-static inline void skb_gro_pull(struct sk_buff *skb, unsigned int len)
-{
-	NAPI_GRO_CB(skb)->data_offset += len;
-}
-
-static inline void *skb_gro_header_fast(struct sk_buff *skb,
-					unsigned int offset)
-{
-	return NAPI_GRO_CB(skb)->frag0 + offset;
-}
-
-static inline int skb_gro_header_hard(struct sk_buff *skb, unsigned int hlen)
-{
-	return NAPI_GRO_CB(skb)->frag0_len < hlen;
-}
-
-static inline void *skb_gro_header_slow(struct sk_buff *skb, unsigned int hlen,
-					unsigned int offset)
-{
-	if (!pskb_may_pull(skb, hlen))
-		return NULL;
-
-	NAPI_GRO_CB(skb)->frag0 = NULL;
-	NAPI_GRO_CB(skb)->frag0_len = 0;
-	return skb->data + offset;
-}
-
-static inline void *skb_gro_mac_header(struct sk_buff *skb)
-{
-	return NAPI_GRO_CB(skb)->frag0 ?: skb_mac_header(skb);
-}
-
-static inline void *skb_gro_network_header(struct sk_buff *skb)
-{
-	return (NAPI_GRO_CB(skb)->frag0 ?: skb->data) +
-	       skb_network_offset(skb);
-}
-
-static inline int dev_hard_header(struct sk_buff *skb, struct net_device *dev,
-				  unsigned short type,
-				  const void *daddr, const void *saddr,
-				  unsigned len)
-{
-	if (!dev->header_ops || !dev->header_ops->create)
-		return 0;
-
-	return dev->header_ops->create(skb, dev, type, daddr, saddr, len);
-}
-
-static inline int dev_parse_header(const struct sk_buff *skb,
-				   unsigned char *haddr)
-{
-	const struct net_device *dev = skb->dev;
-
-	if (!dev->header_ops || !dev->header_ops->parse)
-		return 0;
-	return dev->header_ops->parse(skb, haddr);
-}
-
-typedef int gifconf_func_t(struct net_device * dev, char __user * bufptr, int len);
-extern int		register_gifconf(unsigned int family, gifconf_func_t * gifconf);
-static inline int unregister_gifconf(unsigned int family)
-{
-	return register_gifconf(family, NULL);
-}
-
-/*
- * Incoming packets are placed on per-cpu queues
- */
-struct softnet_data {
-	struct Qdisc		*output_queue;
-	struct Qdisc		**output_queue_tailp;
-	struct list_head	poll_list;
-	struct sk_buff		*completion_queue;
-	struct sk_buff_head	process_queue;
-
-	/* stats */
-	unsigned int		processed;
-	unsigned int		time_squeeze;
-	unsigned int		cpu_collision;
-	unsigned int		received_rps;
-
-#ifdef CONFIG_RPS
-	struct softnet_data	*rps_ipi_list;
-
-	/* Elements below can be accessed between CPUs for RPS */
-	struct call_single_data	csd ____cacheline_aligned_in_smp;
-	struct softnet_data	*rps_ipi_next;
-	unsigned int		cpu;
-	unsigned int		input_queue_head;
-	unsigned int		input_queue_tail;
-#endif
-	unsigned		dropped;
-	struct sk_buff_head	input_pkt_queue;
-	struct napi_struct	backlog;
-};
-
-static inline void input_queue_head_incr(struct softnet_data *sd)
-{
-#ifdef CONFIG_RPS
-	sd->input_queue_head++;
-#endif
-}
-
-static inline void input_queue_tail_incr_save(struct softnet_data *sd,
-					      unsigned int *qtail)
-{
-#ifdef CONFIG_RPS
-	*qtail = ++sd->input_queue_tail;
-#endif
-}
-
-DECLARE_PER_CPU_ALIGNED(struct softnet_data, softnet_data);
-
-extern void __netif_schedule(struct Qdisc *q);
-
-static inline void netif_schedule_queue(struct netdev_queue *txq)
-{
-	if (!(txq->state & QUEUE_STATE_ANY_XOFF))
-		__netif_schedule(txq->qdisc);
-}
-
-static inline void netif_tx_schedule_all(struct net_device *dev)
-{
-	unsigned int i;
-
-	for (i = 0; i < dev->num_tx_queues; i++)
-		netif_schedule_queue(netdev_get_tx_queue(dev, i));
-}
-
-static inline void netif_tx_start_queue(struct netdev_queue *dev_queue)
-{
-	clear_bit(__QUEUE_STATE_DRV_XOFF, &dev_queue->state);
-}
-
-/**
- *	netif_start_queue - allow transmit
- *	@dev: network device
- *
- *	Allow upper layers to call the device hard_start_xmit routine.
- */
-static inline void netif_start_queue(struct net_device *dev)
-{
-	netif_tx_start_queue(netdev_get_tx_queue(dev, 0));
-}
-
-static inline void netif_tx_start_all_queues(struct net_device *dev)
-{
-	unsigned int i;
-
-	for (i = 0; i < dev->num_tx_queues; i++) {
-		struct netdev_queue *txq = netdev_get_tx_queue(dev, i);
-		netif_tx_start_queue(txq);
-	}
-}
-
-static inline void netif_tx_wake_queue(struct netdev_queue *dev_queue)
-{
-#ifdef CONFIG_NETPOLL_TRAP
-	if (netpoll_trap()) {
-		netif_tx_start_queue(dev_queue);
-		return;
-	}
-#endif
-	if (test_and_clear_bit(__QUEUE_STATE_DRV_XOFF, &dev_queue->state))
-		__netif_schedule(dev_queue->qdisc);
-}
-
-/**
- *	netif_wake_queue - restart transmit
- *	@dev: network device
- *
- *	Allow upper layers to call the device hard_start_xmit routine.
- *	Used for flow control when transmit resources are available.
- */
-static inline void netif_wake_queue(struct net_device *dev)
-{
-	netif_tx_wake_queue(netdev_get_tx_queue(dev, 0));
-}
-
-static inline void netif_tx_wake_all_queues(struct net_device *dev)
-{
-	unsigned int i;
-
-	for (i = 0; i < dev->num_tx_queues; i++) {
-		struct netdev_queue *txq = netdev_get_tx_queue(dev, i);
-		netif_tx_wake_queue(txq);
-	}
-}
-
-static inline void netif_tx_stop_queue(struct netdev_queue *dev_queue)
-{
-	if (WARN_ON(!dev_queue)) {
-		pr_info("netif_stop_queue() cannot be called before register_netdev()\n");
-		return;
-	}
-	set_bit(__QUEUE_STATE_DRV_XOFF, &dev_queue->state);
-}
-
-/**
- *	netif_stop_queue - stop transmitted packets
- *	@dev: network device
- *
- *	Stop upper layers calling the device hard_start_xmit routine.
- *	Used for flow control when transmit resources are unavailable.
- */
-static inline void netif_stop_queue(struct net_device *dev)
-{
-	netif_tx_stop_queue(netdev_get_tx_queue(dev, 0));
-}
-
-static inline void netif_tx_stop_all_queues(struct net_device *dev)
-{
-	unsigned int i;
-
-	for (i = 0; i < dev->num_tx_queues; i++) {
-		struct netdev_queue *txq = netdev_get_tx_queue(dev, i);
-		netif_tx_stop_queue(txq);
-	}
-}
-
-static inline bool netif_tx_queue_stopped(const struct netdev_queue *dev_queue)
-{
-	return test_bit(__QUEUE_STATE_DRV_XOFF, &dev_queue->state);
-}
-
-/**
- *	netif_queue_stopped - test if transmit queue is flowblocked
- *	@dev: network device
- *
- *	Test if transmit queue on device is currently unable to send.
- */
-static inline bool netif_queue_stopped(const struct net_device *dev)
-{
-	return netif_tx_queue_stopped(netdev_get_tx_queue(dev, 0));
-}
-
-static inline bool netif_xmit_stopped(const struct netdev_queue *dev_queue)
-{
-	return dev_queue->state & QUEUE_STATE_ANY_XOFF;
-}
-
-static inline bool netif_xmit_frozen_or_stopped(const struct netdev_queue *dev_queue)
-{
-	return dev_queue->state & QUEUE_STATE_ANY_XOFF_OR_FROZEN;
-}
-
-static inline void netdev_tx_sent_queue(struct netdev_queue *dev_queue,
-					unsigned int bytes)
-{
-#ifdef CONFIG_BQL
-	dql_queued(&dev_queue->dql, bytes);
-
-	if (likely(dql_avail(&dev_queue->dql) >= 0))
-		return;
-
-	set_bit(__QUEUE_STATE_STACK_XOFF, &dev_queue->state);
-
-	/*
-	 * The XOFF flag must be set before checking the dql_avail below,
-	 * because in netdev_tx_completed_queue we update the dql_completed
-	 * before checking the XOFF flag.
-	 */
-	smp_mb();
-
-	/* check again in case another CPU has just made room avail */
-	if (unlikely(dql_avail(&dev_queue->dql) >= 0))
-		clear_bit(__QUEUE_STATE_STACK_XOFF, &dev_queue->state);
-#endif
-}
-
-static inline void netdev_sent_queue(struct net_device *dev, unsigned int bytes)
-{
-	netdev_tx_sent_queue(netdev_get_tx_queue(dev, 0), bytes);
-}
-
-static inline void netdev_tx_completed_queue(struct netdev_queue *dev_queue,
-					     unsigned pkts, unsigned bytes)
-{
-#ifdef CONFIG_BQL
-	if (unlikely(!bytes))
-		return;
-
-	dql_completed(&dev_queue->dql, bytes);
-
-	/*
-	 * Without the memory barrier there is a small possiblity that
-	 * netdev_tx_sent_queue will miss the update and cause the queue to
-	 * be stopped forever
-	 */
-	smp_mb();
-
-	if (dql_avail(&dev_queue->dql) < 0)
-		return;
-
-	if (test_and_clear_bit(__QUEUE_STATE_STACK_XOFF, &dev_queue->state))
-		netif_schedule_queue(dev_queue);
-#endif
-}
-
-static inline void netdev_completed_queue(struct net_device *dev,
-					  unsigned pkts, unsigned bytes)
-{
-	netdev_tx_completed_queue(netdev_get_tx_queue(dev, 0), pkts, bytes);
-}
-
-static inline void netdev_tx_reset_queue(struct netdev_queue *q)
-{
-#ifdef CONFIG_BQL
-	clear_bit(__QUEUE_STATE_STACK_XOFF, &q->state);
-	dql_reset(&q->dql);
-#endif
-}
-
-static inline void netdev_reset_queue(struct net_device *dev_queue)
-{
-	netdev_tx_reset_queue(netdev_get_tx_queue(dev_queue, 0));
-}
-
-/**
- *	netif_running - test if up
- *	@dev: network device
- *
- *	Test if the device has been brought up.
- */
-static inline bool netif_running(const struct net_device *dev)
-{
-	return test_bit(__LINK_STATE_START, &dev->state);
-}
-
-/*
- * Routines to manage the subqueues on a device.  We only need start
- * stop, and a check if it's stopped.  All other device management is
- * done at the overall netdevice level.
- * Also test the device if we're multiqueue.
- */
-
-/**
- *	netif_start_subqueue - allow sending packets on subqueue
- *	@dev: network device
- *	@queue_index: sub queue index
- *
- * Start individual transmit queue of a device with multiple transmit queues.
- */
-static inline void netif_start_subqueue(struct net_device *dev, u16 queue_index)
-{
-	struct netdev_queue *txq = netdev_get_tx_queue(dev, queue_index);
-
-	netif_tx_start_queue(txq);
-}
-
-/**
- *	netif_stop_subqueue - stop sending packets on subqueue
- *	@dev: network device
- *	@queue_index: sub queue index
- *
- * Stop individual transmit queue of a device with multiple transmit queues.
- */
-static inline void netif_stop_subqueue(struct net_device *dev, u16 queue_index)
-{
-	struct netdev_queue *txq = netdev_get_tx_queue(dev, queue_index);
-#ifdef CONFIG_NETPOLL_TRAP
-	if (netpoll_trap())
-		return;
-#endif
-	netif_tx_stop_queue(txq);
-}
-
-/**
- *	netif_subqueue_stopped - test status of subqueue
- *	@dev: network device
- *	@queue_index: sub queue index
- *
- * Check individual transmit queue of a device with multiple transmit queues.
- */
-static inline bool __netif_subqueue_stopped(const struct net_device *dev,
-					    u16 queue_index)
-{
-	struct netdev_queue *txq = netdev_get_tx_queue(dev, queue_index);
-
-	return netif_tx_queue_stopped(txq);
-}
-
-static inline bool netif_subqueue_stopped(const struct net_device *dev,
-					  struct sk_buff *skb)
-{
-	return __netif_subqueue_stopped(dev, skb_get_queue_mapping(skb));
-}
-
-/**
- *	netif_wake_subqueue - allow sending packets on subqueue
- *	@dev: network device
- *	@queue_index: sub queue index
- *
- * Resume individual transmit queue of a device with multiple transmit queues.
- */
-static inline void netif_wake_subqueue(struct net_device *dev, u16 queue_index)
-{
-	struct netdev_queue *txq = netdev_get_tx_queue(dev, queue_index);
-#ifdef CONFIG_NETPOLL_TRAP
-	if (netpoll_trap())
-		return;
-#endif
-	if (test_and_clear_bit(__QUEUE_STATE_DRV_XOFF, &txq->state))
-		__netif_schedule(txq->qdisc);
-}
-
-/*
- * Returns a Tx hash for the given packet when dev->real_num_tx_queues is used
- * as a distribution range limit for the returned value.
- */
-static inline u16 skb_tx_hash(const struct net_device *dev,
-			      const struct sk_buff *skb)
-{
-	return __skb_tx_hash(dev, skb, dev->real_num_tx_queues);
-}
-
-/**
- *	netif_is_multiqueue - test if device has multiple transmit queues
- *	@dev: network device
- *
- * Check if device has multiple transmit queues
- */
-static inline bool netif_is_multiqueue(const struct net_device *dev)
-{
-	return dev->num_tx_queues > 1;
-}
-
-extern int netif_set_real_num_tx_queues(struct net_device *dev,
-					unsigned int txq);
-
-#ifdef CONFIG_RPS
-extern int netif_set_real_num_rx_queues(struct net_device *dev,
-					unsigned int rxq);
-#else
-static inline int netif_set_real_num_rx_queues(struct net_device *dev,
-						unsigned int rxq)
-{
-	return 0;
-}
-#endif
-
-static inline int netif_copy_real_num_queues(struct net_device *to_dev,
-					     const struct net_device *from_dev)
-{
-	netif_set_real_num_tx_queues(to_dev, from_dev->real_num_tx_queues);
-#ifdef CONFIG_RPS
-	return netif_set_real_num_rx_queues(to_dev,
-					    from_dev->real_num_rx_queues);
-#else
-	return 0;
-#endif
-}
-
-/* Use this variant when it is known for sure that it
- * is executing from hardware interrupt context or with hardware interrupts
- * disabled.
- */
-extern void dev_kfree_skb_irq(struct sk_buff *skb);
-
-/* Use this variant in places where it could be invoked
- * from either hardware interrupt or other context, with hardware interrupts
- * either disabled or enabled.
- */
-extern void dev_kfree_skb_any(struct sk_buff *skb);
-
-extern int		netif_rx(struct sk_buff *skb);
-extern int		netif_rx_ni(struct sk_buff *skb);
-extern int		netif_receive_skb(struct sk_buff *skb);
-extern gro_result_t	dev_gro_receive(struct napi_struct *napi,
-					struct sk_buff *skb);
-extern gro_result_t	napi_skb_finish(gro_result_t ret, struct sk_buff *skb);
-extern gro_result_t	napi_gro_receive(struct napi_struct *napi,
-					 struct sk_buff *skb);
-extern void		napi_gro_flush(struct napi_struct *napi);
-extern struct sk_buff *	napi_get_frags(struct napi_struct *napi);
-extern gro_result_t	napi_frags_finish(struct napi_struct *napi,
-					  struct sk_buff *skb,
-					  gro_result_t ret);
-extern struct sk_buff *	napi_frags_skb(struct napi_struct *napi);
-extern gro_result_t	napi_gro_frags(struct napi_struct *napi);
-
-static inline void napi_free_frags(struct napi_struct *napi)
-{
-	kfree_skb(napi->skb);
-	napi->skb = NULL;
-}
-
-extern int netdev_rx_handler_register(struct net_device *dev,
-				      rx_handler_func_t *rx_handler,
-				      void *rx_handler_data);
-extern void netdev_rx_handler_unregister(struct net_device *dev);
-
-extern bool		dev_valid_name(const char *name);
-extern int		dev_ioctl(struct net *net, unsigned int cmd, void __user *);
-extern int		dev_ethtool(struct net *net, struct ifreq *);
-extern unsigned		dev_get_flags(const struct net_device *);
-extern int		__dev_change_flags(struct net_device *, unsigned int flags);
-extern int		dev_change_flags(struct net_device *, unsigned);
-extern void		__dev_notify_flags(struct net_device *, unsigned int old_flags);
-extern int		dev_change_name(struct net_device *, const char *);
-extern int		dev_set_alias(struct net_device *, const char *, size_t);
-extern int		dev_change_net_namespace(struct net_device *,
-						 struct net *, const char *);
-extern int		dev_set_mtu(struct net_device *, int);
-extern void		dev_set_group(struct net_device *, int);
-extern int		dev_set_mac_address(struct net_device *,
-					    struct sockaddr *);
-extern int		dev_hard_start_xmit(struct sk_buff *skb,
-					    struct net_device *dev,
-					    struct netdev_queue *txq);
-extern int		dev_forward_skb(struct net_device *dev,
-					struct sk_buff *skb);
-
-extern int		netdev_budget;
-
-/* Called by rtnetlink.c:rtnl_unlock() */
-extern void netdev_run_todo(void);
-
-/**
- *	dev_put - release reference to device
- *	@dev: network device
- *
- * Release reference to device to allow it to be freed.
- */
-static inline void dev_put(struct net_device *dev)
-{
-	this_cpu_dec(*dev->pcpu_refcnt);
-}
-
-/**
- *	dev_hold - get reference to device
- *	@dev: network device
- *
- * Hold reference to device to keep it from being freed.
- */
-static inline void dev_hold(struct net_device *dev)
-{
-	this_cpu_inc(*dev->pcpu_refcnt);
-}
-
-/* Carrier loss detection, dial on demand. The functions netif_carrier_on
- * and _off may be called from IRQ context, but it is caller
- * who is responsible for serialization of these calls.
- *
- * The name carrier is inappropriate, these functions should really be
- * called netif_lowerlayer_*() because they represent the state of any
- * kind of lower layer not just hardware media.
- */
-
-extern void linkwatch_fire_event(struct net_device *dev);
-extern void linkwatch_forget_dev(struct net_device *dev);
-
-/**
- *	netif_carrier_ok - test if carrier present
- *	@dev: network device
- *
- * Check if carrier is present on device
- */
-static inline bool netif_carrier_ok(const struct net_device *dev)
-{
-	return !test_bit(__LINK_STATE_NOCARRIER, &dev->state);
-}
-
-extern unsigned long dev_trans_start(struct net_device *dev);
-
-extern void __netdev_watchdog_up(struct net_device *dev);
-
-extern void netif_carrier_on(struct net_device *dev);
-
-extern void netif_carrier_off(struct net_device *dev);
-
-extern void netif_notify_peers(struct net_device *dev);
-
-/**
- *	netif_dormant_on - mark device as dormant.
- *	@dev: network device
- *
- * Mark device as dormant (as per RFC2863).
- *
- * The dormant state indicates that the relevant interface is not
- * actually in a condition to pass packets (i.e., it is not 'up') but is
- * in a "pending" state, waiting for some external event.  For "on-
- * demand" interfaces, this new state identifies the situation where the
- * interface is waiting for events to place it in the up state.
- *
- */
-static inline void netif_dormant_on(struct net_device *dev)
-{
-	if (!test_and_set_bit(__LINK_STATE_DORMANT, &dev->state))
-		linkwatch_fire_event(dev);
-}
-
-/**
- *	netif_dormant_off - set device as not dormant.
- *	@dev: network device
- *
- * Device is not in dormant state.
- */
-static inline void netif_dormant_off(struct net_device *dev)
-{
-	if (test_and_clear_bit(__LINK_STATE_DORMANT, &dev->state))
-		linkwatch_fire_event(dev);
-}
-
-/**
- *	netif_dormant - test if carrier present
- *	@dev: network device
- *
- * Check if carrier is present on device
- */
-static inline bool netif_dormant(const struct net_device *dev)
-{
-	return test_bit(__LINK_STATE_DORMANT, &dev->state);
-}
-
-
-/**
- *	netif_oper_up - test if device is operational
- *	@dev: network device
- *
- * Check if carrier is operational
- */
-static inline bool netif_oper_up(const struct net_device *dev)
-{
-	return (dev->operstate == IF_OPER_UP ||
-		dev->operstate == IF_OPER_UNKNOWN /* backward compat */);
-}
-
-/**
- *	netif_device_present - is device available or removed
- *	@dev: network device
- *
- * Check if device has not been removed from system.
- */
-static inline bool netif_device_present(struct net_device *dev)
-{
-	return test_bit(__LINK_STATE_PRESENT, &dev->state);
-}
-
-extern void netif_device_detach(struct net_device *dev);
-
-extern void netif_device_attach(struct net_device *dev);
-
-/*
- * Network interface message level settings
- */
-
-enum {
-	NETIF_MSG_DRV		= 0x0001,
-	NETIF_MSG_PROBE		= 0x0002,
-	NETIF_MSG_LINK		= 0x0004,
-	NETIF_MSG_TIMER		= 0x0008,
-	NETIF_MSG_IFDOWN	= 0x0010,
-	NETIF_MSG_IFUP		= 0x0020,
-	NETIF_MSG_RX_ERR	= 0x0040,
-	NETIF_MSG_TX_ERR	= 0x0080,
-	NETIF_MSG_TX_QUEUED	= 0x0100,
-	NETIF_MSG_INTR		= 0x0200,
-	NETIF_MSG_TX_DONE	= 0x0400,
-	NETIF_MSG_RX_STATUS	= 0x0800,
-	NETIF_MSG_PKTDATA	= 0x1000,
-	NETIF_MSG_HW		= 0x2000,
-	NETIF_MSG_WOL		= 0x4000,
-};
-
-#define netif_msg_drv(p)	((p)->msg_enable & NETIF_MSG_DRV)
-#define netif_msg_probe(p)	((p)->msg_enable & NETIF_MSG_PROBE)
-#define netif_msg_link(p)	((p)->msg_enable & NETIF_MSG_LINK)
-#define netif_msg_timer(p)	((p)->msg_enable & NETIF_MSG_TIMER)
-#define netif_msg_ifdown(p)	((p)->msg_enable & NETIF_MSG_IFDOWN)
-#define netif_msg_ifup(p)	((p)->msg_enable & NETIF_MSG_IFUP)
-#define netif_msg_rx_err(p)	((p)->msg_enable & NETIF_MSG_RX_ERR)
-#define netif_msg_tx_err(p)	((p)->msg_enable & NETIF_MSG_TX_ERR)
-#define netif_msg_tx_queued(p)	((p)->msg_enable & NETIF_MSG_TX_QUEUED)
-#define netif_msg_intr(p)	((p)->msg_enable & NETIF_MSG_INTR)
-#define netif_msg_tx_done(p)	((p)->msg_enable & NETIF_MSG_TX_DONE)
-#define netif_msg_rx_status(p)	((p)->msg_enable & NETIF_MSG_RX_STATUS)
-#define netif_msg_pktdata(p)	((p)->msg_enable & NETIF_MSG_PKTDATA)
-#define netif_msg_hw(p)		((p)->msg_enable & NETIF_MSG_HW)
-#define netif_msg_wol(p)	((p)->msg_enable & NETIF_MSG_WOL)
-
-static inline u32 netif_msg_init(int debug_value, int default_msg_enable_bits)
-{
-	/* use default */
-	if (debug_value < 0 || debug_value >= (sizeof(u32) * 8))
-		return default_msg_enable_bits;
-	if (debug_value == 0)	/* no output */
-		return 0;
-	/* set low N bits */
-	return (1 << debug_value) - 1;
-}
-
-static inline void __netif_tx_lock(struct netdev_queue *txq, int cpu)
-{
-	spin_lock(&txq->_xmit_lock);
-	txq->xmit_lock_owner = cpu;
-}
-
-static inline void __netif_tx_lock_bh(struct netdev_queue *txq)
-{
-	spin_lock_bh(&txq->_xmit_lock);
-	txq->xmit_lock_owner = smp_processor_id();
-}
-
-static inline bool __netif_tx_trylock(struct netdev_queue *txq)
-{
-	bool ok = spin_trylock(&txq->_xmit_lock);
-	if (likely(ok))
-		txq->xmit_lock_owner = smp_processor_id();
-	return ok;
-}
-
-static inline void __netif_tx_unlock(struct netdev_queue *txq)
-{
-	txq->xmit_lock_owner = -1;
-	spin_unlock(&txq->_xmit_lock);
-}
-
-static inline void __netif_tx_unlock_bh(struct netdev_queue *txq)
-{
-	txq->xmit_lock_owner = -1;
-	spin_unlock_bh(&txq->_xmit_lock);
-}
-
-static inline void txq_trans_update(struct netdev_queue *txq)
-{
-	if (txq->xmit_lock_owner != -1)
-		txq->trans_start = jiffies;
-}
-
-/**
- *	netif_tx_lock - grab network device transmit lock
- *	@dev: network device
- *
- * Get network device transmit lock
- */
-static inline void netif_tx_lock(struct net_device *dev)
-{
-	unsigned int i;
-	int cpu;
-
-	spin_lock(&dev->tx_global_lock);
-	cpu = smp_processor_id();
-	for (i = 0; i < dev->num_tx_queues; i++) {
-		struct netdev_queue *txq = netdev_get_tx_queue(dev, i);
-
-		/* We are the only thread of execution doing a
-		 * freeze, but we have to grab the _xmit_lock in
-		 * order to synchronize with threads which are in
-		 * the ->hard_start_xmit() handler and already
-		 * checked the frozen bit.
-		 */
-		__netif_tx_lock(txq, cpu);
-		set_bit(__QUEUE_STATE_FROZEN, &txq->state);
-		__netif_tx_unlock(txq);
-	}
-}
-
-static inline void netif_tx_lock_bh(struct net_device *dev)
-{
-	local_bh_disable();
-	netif_tx_lock(dev);
-}
-
-static inline void netif_tx_unlock(struct net_device *dev)
-{
-	unsigned int i;
-
-	for (i = 0; i < dev->num_tx_queues; i++) {
-		struct netdev_queue *txq = netdev_get_tx_queue(dev, i);
-
-		/* No need to grab the _xmit_lock here.  If the
-		 * queue is not stopped for another reason, we
-		 * force a schedule.
-		 */
-		clear_bit(__QUEUE_STATE_FROZEN, &txq->state);
-		netif_schedule_queue(txq);
-	}
-	spin_unlock(&dev->tx_global_lock);
-}
-
-static inline void netif_tx_unlock_bh(struct net_device *dev)
-{
-	netif_tx_unlock(dev);
-	local_bh_enable();
-}
-
-#define HARD_TX_LOCK(dev, txq, cpu) {			\
-	if ((dev->features & NETIF_F_LLTX) == 0) {	\
-		__netif_tx_lock(txq, cpu);		\
-	}						\
-}
-
-#define HARD_TX_UNLOCK(dev, txq) {			\
-	if ((dev->features & NETIF_F_LLTX) == 0) {	\
-		__netif_tx_unlock(txq);			\
-	}						\
-}
-
-static inline void netif_tx_disable(struct net_device *dev)
-{
-	unsigned int i;
-	int cpu;
-
-	local_bh_disable();
-	cpu = smp_processor_id();
-	for (i = 0; i < dev->num_tx_queues; i++) {
-		struct netdev_queue *txq = netdev_get_tx_queue(dev, i);
-
-		__netif_tx_lock(txq, cpu);
-		netif_tx_stop_queue(txq);
-		__netif_tx_unlock(txq);
-	}
-	local_bh_enable();
-}
-
-static inline void netif_addr_lock(struct net_device *dev)
-{
-	spin_lock(&dev->addr_list_lock);
-}
-
-static inline void netif_addr_lock_nested(struct net_device *dev)
-{
-	spin_lock_nested(&dev->addr_list_lock, SINGLE_DEPTH_NESTING);
-}
-
-static inline void netif_addr_lock_bh(struct net_device *dev)
-{
-	spin_lock_bh(&dev->addr_list_lock);
-}
-
-static inline void netif_addr_unlock(struct net_device *dev)
-{
-	spin_unlock(&dev->addr_list_lock);
-}
-
-static inline void netif_addr_unlock_bh(struct net_device *dev)
-{
-	spin_unlock_bh(&dev->addr_list_lock);
-}
-
-/*
- * dev_addrs walker. Should be used only for read access. Call with
- * rcu_read_lock held.
- */
-#define for_each_dev_addr(dev, ha) \
-		list_for_each_entry_rcu(ha, &dev->dev_addrs.list, list)
-
-/* These functions live elsewhere (drivers/net/net_init.c, but related) */
-
-extern void		ether_setup(struct net_device *dev);
-
-/* Support for loadable net-drivers */
-extern struct net_device *alloc_netdev_mqs(int sizeof_priv, const char *name,
-				       void (*setup)(struct net_device *),
-				       unsigned int txqs, unsigned int rxqs);
-#define alloc_netdev(sizeof_priv, name, setup) \
-	alloc_netdev_mqs(sizeof_priv, name, setup, 1, 1)
-
-#define alloc_netdev_mq(sizeof_priv, name, setup, count) \
-	alloc_netdev_mqs(sizeof_priv, name, setup, count, count)
-
-extern int		register_netdev(struct net_device *dev);
-extern void		unregister_netdev(struct net_device *dev);
-
-/* General hardware address lists handling functions */
-extern int __hw_addr_add_multiple(struct netdev_hw_addr_list *to_list,
-				  struct netdev_hw_addr_list *from_list,
-				  int addr_len, unsigned char addr_type);
-extern void __hw_addr_del_multiple(struct netdev_hw_addr_list *to_list,
-				   struct netdev_hw_addr_list *from_list,
-				   int addr_len, unsigned char addr_type);
-extern int __hw_addr_sync(struct netdev_hw_addr_list *to_list,
-			  struct netdev_hw_addr_list *from_list,
-			  int addr_len);
-extern void __hw_addr_unsync(struct netdev_hw_addr_list *to_list,
-			     struct netdev_hw_addr_list *from_list,
-			     int addr_len);
-extern void __hw_addr_flush(struct netdev_hw_addr_list *list);
-extern void __hw_addr_init(struct netdev_hw_addr_list *list);
-
-/* Functions used for device addresses handling */
-extern int dev_addr_add(struct net_device *dev, unsigned char *addr,
-			unsigned char addr_type);
-extern int dev_addr_del(struct net_device *dev, unsigned char *addr,
-			unsigned char addr_type);
-extern int dev_addr_add_multiple(struct net_device *to_dev,
-				 struct net_device *from_dev,
-				 unsigned char addr_type);
-extern int dev_addr_del_multiple(struct net_device *to_dev,
-				 struct net_device *from_dev,
-				 unsigned char addr_type);
-extern void dev_addr_flush(struct net_device *dev);
-extern int dev_addr_init(struct net_device *dev);
-
-/* Functions used for unicast addresses handling */
-extern int dev_uc_add(struct net_device *dev, unsigned char *addr);
-extern int dev_uc_del(struct net_device *dev, unsigned char *addr);
-extern int dev_uc_sync(struct net_device *to, struct net_device *from);
-extern void dev_uc_unsync(struct net_device *to, struct net_device *from);
-extern void dev_uc_flush(struct net_device *dev);
-extern void dev_uc_init(struct net_device *dev);
-
-/* Functions used for multicast addresses handling */
-extern int dev_mc_add(struct net_device *dev, unsigned char *addr);
-extern int dev_mc_add_global(struct net_device *dev, unsigned char *addr);
-extern int dev_mc_del(struct net_device *dev, unsigned char *addr);
-extern int dev_mc_del_global(struct net_device *dev, unsigned char *addr);
-extern int dev_mc_sync(struct net_device *to, struct net_device *from);
-extern void dev_mc_unsync(struct net_device *to, struct net_device *from);
-extern void dev_mc_flush(struct net_device *dev);
-extern void dev_mc_init(struct net_device *dev);
-
-/* Functions used for secondary unicast and multicast support */
-extern void		dev_set_rx_mode(struct net_device *dev);
-extern void		__dev_set_rx_mode(struct net_device *dev);
-extern int		dev_set_promiscuity(struct net_device *dev, int inc);
-extern int		dev_set_allmulti(struct net_device *dev, int inc);
-extern void		netdev_state_change(struct net_device *dev);
-extern int		netdev_bonding_change(struct net_device *dev,
-					      unsigned long event);
-extern void		netdev_features_change(struct net_device *dev);
-/* Load a device via the kmod */
-extern void		dev_load(struct net *net, const char *name);
-extern void		dev_mcast_init(void);
-extern struct rtnl_link_stats64 *dev_get_stats(struct net_device *dev,
-					       struct rtnl_link_stats64 *storage);
-extern void netdev_stats_to_stats64(struct rtnl_link_stats64 *stats64,
-				    const struct net_device_stats *netdev_stats);
-
-extern int		netdev_max_backlog;
-extern int		netdev_tstamp_prequeue;
-extern int		weight_p;
-extern int		bpf_jit_enable;
-extern int		netdev_set_master(struct net_device *dev, struct net_device *master);
-extern int netdev_set_bond_master(struct net_device *dev,
-				  struct net_device *master);
-extern int skb_checksum_help(struct sk_buff *skb);
-extern struct sk_buff *skb_gso_segment(struct sk_buff *skb,
-	netdev_features_t features);
-#ifdef CONFIG_BUG
-extern void netdev_rx_csum_fault(struct net_device *dev);
-#else
-static inline void netdev_rx_csum_fault(struct net_device *dev)
-{
-}
-#endif
-/* rx skb timestamps */
-extern void		net_enable_timestamp(void);
-extern void		net_disable_timestamp(void);
-
-#ifdef CONFIG_PROC_FS
-extern void *dev_seq_start(struct seq_file *seq, loff_t *pos);
-extern void *dev_seq_next(struct seq_file *seq, void *v, loff_t *pos);
-extern void dev_seq_stop(struct seq_file *seq, void *v);
-#endif
-
-extern int netdev_class_create_file(struct class_attribute *class_attr);
-extern void netdev_class_remove_file(struct class_attribute *class_attr);
-
-extern struct kobj_ns_type_operations net_ns_type_operations;
-
-extern const char *netdev_drivername(const struct net_device *dev);
-
-extern void linkwatch_run_queue(void);
-
-static inline netdev_features_t netdev_get_wanted_features(
-	struct net_device *dev)
-{
-	return (dev->features & ~dev->hw_features) | dev->wanted_features;
-}
-netdev_features_t netdev_increment_features(netdev_features_t all,
-	netdev_features_t one, netdev_features_t mask);
-int __netdev_update_features(struct net_device *dev);
-void netdev_update_features(struct net_device *dev);
-void netdev_change_features(struct net_device *dev);
-
-void netif_stacked_transfer_operstate(const struct net_device *rootdev,
-					struct net_device *dev);
-
-netdev_features_t netif_skb_features(struct sk_buff *skb);
-
-static inline bool net_gso_ok(netdev_features_t features, int gso_type)
-{
-	netdev_features_t feature = gso_type << NETIF_F_GSO_SHIFT;
-
-	/* check flags correspondence */
-	BUILD_BUG_ON(SKB_GSO_TCPV4   != (NETIF_F_TSO >> NETIF_F_GSO_SHIFT));
-	BUILD_BUG_ON(SKB_GSO_UDP     != (NETIF_F_UFO >> NETIF_F_GSO_SHIFT));
-	BUILD_BUG_ON(SKB_GSO_DODGY   != (NETIF_F_GSO_ROBUST >> NETIF_F_GSO_SHIFT));
-	BUILD_BUG_ON(SKB_GSO_TCP_ECN != (NETIF_F_TSO_ECN >> NETIF_F_GSO_SHIFT));
-	BUILD_BUG_ON(SKB_GSO_TCPV6   != (NETIF_F_TSO6 >> NETIF_F_GSO_SHIFT));
-	BUILD_BUG_ON(SKB_GSO_FCOE    != (NETIF_F_FSO >> NETIF_F_GSO_SHIFT));
-
-	return (features & feature) == feature;
-}
-
-static inline bool skb_gso_ok(struct sk_buff *skb, netdev_features_t features)
-{
-	return net_gso_ok(features, skb_shinfo(skb)->gso_type) &&
-	       (!skb_has_frag_list(skb) || (features & NETIF_F_FRAGLIST));
-}
-
-static inline bool netif_needs_gso(struct sk_buff *skb,
-				   netdev_features_t features)
-{
-	return skb_is_gso(skb) && (!skb_gso_ok(skb, features) ||
-		unlikely((skb->ip_summed != CHECKSUM_PARTIAL) &&
-			 (skb->ip_summed != CHECKSUM_UNNECESSARY)));
-}
-
-static inline void netif_set_gso_max_size(struct net_device *dev,
-					  unsigned int size)
-{
-	dev->gso_max_size = size;
-}
-
-static inline bool netif_is_bond_slave(struct net_device *dev)
-{
-	return dev->flags & IFF_SLAVE && dev->priv_flags & IFF_BONDING;
-}
-
-static inline bool netif_supports_nofcs(struct net_device *dev)
-{
-	return dev->priv_flags & IFF_SUPP_NOFCS;
-}
-
-extern struct pernet_operations __net_initdata loopback_net_ops;
-
-/* Logging, debugging and troubleshooting/diagnostic helpers. */
-
-/* netdev_printk helpers, similar to dev_printk */
-
-static inline const char *netdev_name(const struct net_device *dev)
-{
-	if (dev->reg_state != NETREG_REGISTERED)
-		return "(unregistered net_device)";
-	return dev->name;
-}
-
-extern int __netdev_printk(const char *level, const struct net_device *dev,
-			struct va_format *vaf);
-
-extern __printf(3, 4)
-int netdev_printk(const char *level, const struct net_device *dev,
-		  const char *format, ...);
-extern __printf(2, 3)
-int netdev_emerg(const struct net_device *dev, const char *format, ...);
-extern __printf(2, 3)
-int netdev_alert(const struct net_device *dev, const char *format, ...);
-extern __printf(2, 3)
-int netdev_crit(const struct net_device *dev, const char *format, ...);
-extern __printf(2, 3)
-int netdev_err(const struct net_device *dev, const char *format, ...);
-extern __printf(2, 3)
-int netdev_warn(const struct net_device *dev, const char *format, ...);
-extern __printf(2, 3)
-int netdev_notice(const struct net_device *dev, const char *format, ...);
-extern __printf(2, 3)
-int netdev_info(const struct net_device *dev, const char *format, ...);
-
-#define MODULE_ALIAS_NETDEV(device) \
-	MODULE_ALIAS("netdev-" device)
-
-#if defined(CONFIG_DYNAMIC_DEBUG)
-#define netdev_dbg(__dev, format, args...)			\
-do {								\
-	dynamic_netdev_dbg(__dev, format, ##args);		\
-} while (0)
-#elif defined(DEBUG)
-#define netdev_dbg(__dev, format, args...)			\
-	netdev_printk(KERN_DEBUG, __dev, format, ##args)
-#else
-#define netdev_dbg(__dev, format, args...)			\
-({								\
-	if (0)							\
-		netdev_printk(KERN_DEBUG, __dev, format, ##args); \
-	0;							\
-})
-#endif
-
-#if defined(VERBOSE_DEBUG)
-#define netdev_vdbg	netdev_dbg
-#else
-
-#define netdev_vdbg(dev, format, args...)			\
-({								\
-	if (0)							\
-		netdev_printk(KERN_DEBUG, dev, format, ##args);	\
-	0;							\
-})
-#endif
-
-/*
- * netdev_WARN() acts like dev_printk(), but with the key difference
- * of using a WARN/WARN_ON to get the message out, including the
- * file/line information and a backtrace.
- */
-#define netdev_WARN(dev, format, args...)			\
-	WARN(1, "netdevice: %s\n" format, netdev_name(dev), ##args);
-
-/* netif printk helpers, similar to netdev_printk */
-
-#define netif_printk(priv, type, level, dev, fmt, args...)	\
-do {					  			\
-	if (netif_msg_##type(priv))				\
-		netdev_printk(level, (dev), fmt, ##args);	\
-} while (0)
-
-#define netif_level(level, priv, type, dev, fmt, args...)	\
-do {								\
-	if (netif_msg_##type(priv))				\
-		netdev_##level(dev, fmt, ##args);		\
-} while (0)
-
-#define netif_emerg(priv, type, dev, fmt, args...)		\
-	netif_level(emerg, priv, type, dev, fmt, ##args)
-#define netif_alert(priv, type, dev, fmt, args...)		\
-	netif_level(alert, priv, type, dev, fmt, ##args)
-#define netif_crit(priv, type, dev, fmt, args...)		\
-	netif_level(crit, priv, type, dev, fmt, ##args)
-#define netif_err(priv, type, dev, fmt, args...)		\
-	netif_level(err, priv, type, dev, fmt, ##args)
-#define netif_warn(priv, type, dev, fmt, args...)		\
-	netif_level(warn, priv, type, dev, fmt, ##args)
-#define netif_notice(priv, type, dev, fmt, args...)		\
-	netif_level(notice, priv, type, dev, fmt, ##args)
-#define netif_info(priv, type, dev, fmt, args...)		\
-	netif_level(info, priv, type, dev, fmt, ##args)
-
-#if defined(DEBUG)
-#define netif_dbg(priv, type, dev, format, args...)		\
-	netif_printk(priv, type, KERN_DEBUG, dev, format, ##args)
-#elif defined(CONFIG_DYNAMIC_DEBUG)
-#define netif_dbg(priv, type, netdev, format, args...)		\
-do {								\
-	if (netif_msg_##type(priv))				\
-		dynamic_netdev_dbg(netdev, format, ##args);	\
-} while (0)
-#else
-#define netif_dbg(priv, type, dev, format, args...)			\
-({									\
-	if (0)								\
-		netif_printk(priv, type, KERN_DEBUG, dev, format, ##args); \
-	0;								\
-})
-#endif
-
-#if defined(VERBOSE_DEBUG)
-#define netif_vdbg	netif_dbg
-#else
-#define netif_vdbg(priv, type, dev, format, args...)		\
-({								\
-	if (0)							\
-		netif_printk(priv, type, KERN_DEBUG, dev, format, ##args); \
-	0;							\
-})
-#endif
-
-#endif /* __KERNEL__ */
-
-#endif	/* _LINUX_NETDEVICE_H */
diff --git a/ANDROID_3.4.5/include/linux/netfilter.h b/ANDROID_3.4.5/include/linux/netfilter.h
deleted file mode 100644
index 29734be3..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter.h
+++ /dev/null
@@ -1,397 +0,0 @@
-#ifndef __LINUX_NETFILTER_H
-#define __LINUX_NETFILTER_H
-
-#ifdef __KERNEL__
-#include <linux/init.h>
-#include <linux/skbuff.h>
-#include <linux/net.h>
-#include <linux/if.h>
-#include <linux/in.h>
-#include <linux/in6.h>
-#include <linux/wait.h>
-#include <linux/list.h>
-#endif
-#include <linux/types.h>
-#include <linux/compiler.h>
-#include <linux/sysctl.h>
-
-/* Responses from hook functions. */
-#define NF_DROP 0
-#define NF_ACCEPT 1
-#define NF_STOLEN 2
-#define NF_QUEUE 3
-#define NF_REPEAT 4
-#define NF_STOP 5
-#define NF_MAX_VERDICT NF_STOP
-
-/* we overload the higher bits for encoding auxiliary data such as the queue
- * number or errno values. Not nice, but better than additional function
- * arguments. */
-#define NF_VERDICT_MASK 0x000000ff
-
-/* extra verdict flags have mask 0x0000ff00 */
-#define NF_VERDICT_FLAG_QUEUE_BYPASS	0x00008000
-
-/* queue number (NF_QUEUE) or errno (NF_DROP) */
-#define NF_VERDICT_QMASK 0xffff0000
-#define NF_VERDICT_QBITS 16
-
-#define NF_QUEUE_NR(x) ((((x) << 16) & NF_VERDICT_QMASK) | NF_QUEUE)
-
-#define NF_DROP_ERR(x) (((-x) << 16) | NF_DROP)
-
-/* only for userspace compatibility */
-#ifndef __KERNEL__
-/* Generic cache responses from hook functions.
-   <= 0x2000 is used for protocol-flags. */
-#define NFC_UNKNOWN 0x4000
-#define NFC_ALTERED 0x8000
-
-/* NF_VERDICT_BITS should be 8 now, but userspace might break if this changes */
-#define NF_VERDICT_BITS 16
-#endif
-
-enum nf_inet_hooks {
-	NF_INET_PRE_ROUTING,
-	NF_INET_LOCAL_IN,
-	NF_INET_FORWARD,
-	NF_INET_LOCAL_OUT,
-	NF_INET_POST_ROUTING,
-	NF_INET_NUMHOOKS
-};
-
-enum {
-	NFPROTO_UNSPEC =  0,
-	NFPROTO_IPV4   =  2,
-	NFPROTO_ARP    =  3,
-	NFPROTO_BRIDGE =  7,
-	NFPROTO_IPV6   = 10,
-	NFPROTO_DECNET = 12,
-	NFPROTO_NUMPROTO,
-};
-
-union nf_inet_addr {
-	__u32		all[4];
-	__be32		ip;
-	__be32		ip6[4];
-	struct in_addr	in;
-	struct in6_addr	in6;
-};
-
-#ifdef __KERNEL__
-#ifdef CONFIG_NETFILTER
-static inline int NF_DROP_GETERR(int verdict)
-{
-	return -(verdict >> NF_VERDICT_QBITS);
-}
-
-static inline int nf_inet_addr_cmp(const union nf_inet_addr *a1,
-				   const union nf_inet_addr *a2)
-{
-	return a1->all[0] == a2->all[0] &&
-	       a1->all[1] == a2->all[1] &&
-	       a1->all[2] == a2->all[2] &&
-	       a1->all[3] == a2->all[3];
-}
-
-extern void netfilter_init(void);
-
-/* Largest hook number + 1 */
-#define NF_MAX_HOOKS 8
-
-struct sk_buff;
-
-typedef unsigned int nf_hookfn(unsigned int hooknum,
-			       struct sk_buff *skb,
-			       const struct net_device *in,
-			       const struct net_device *out,
-			       int (*okfn)(struct sk_buff *));
-
-struct nf_hook_ops {
-	struct list_head list;
-
-	/* User fills in from here down. */
-	nf_hookfn *hook;
-	struct module *owner;
-	u_int8_t pf;
-	unsigned int hooknum;
-	/* Hooks are ordered in ascending priority. */
-	int priority;
-};
-
-struct nf_sockopt_ops {
-	struct list_head list;
-
-	u_int8_t pf;
-
-	/* Non-inclusive ranges: use 0/0/NULL to never get called. */
-	int set_optmin;
-	int set_optmax;
-	int (*set)(struct sock *sk, int optval, void __user *user, unsigned int len);
-#ifdef CONFIG_COMPAT
-	int (*compat_set)(struct sock *sk, int optval,
-			void __user *user, unsigned int len);
-#endif
-	int get_optmin;
-	int get_optmax;
-	int (*get)(struct sock *sk, int optval, void __user *user, int *len);
-#ifdef CONFIG_COMPAT
-	int (*compat_get)(struct sock *sk, int optval,
-			void __user *user, int *len);
-#endif
-	/* Use the module struct to lock set/get code in place */
-	struct module *owner;
-};
-
-/* Function to register/unregister hook points. */
-int nf_register_hook(struct nf_hook_ops *reg);
-void nf_unregister_hook(struct nf_hook_ops *reg);
-int nf_register_hooks(struct nf_hook_ops *reg, unsigned int n);
-void nf_unregister_hooks(struct nf_hook_ops *reg, unsigned int n);
-
-/* Functions to register get/setsockopt ranges (non-inclusive).  You
-   need to check permissions yourself! */
-int nf_register_sockopt(struct nf_sockopt_ops *reg);
-void nf_unregister_sockopt(struct nf_sockopt_ops *reg);
-
-#ifdef CONFIG_SYSCTL
-/* Sysctl registration */
-extern struct ctl_path nf_net_netfilter_sysctl_path[];
-extern struct ctl_path nf_net_ipv4_netfilter_sysctl_path[];
-#endif /* CONFIG_SYSCTL */
-
-extern struct list_head nf_hooks[NFPROTO_NUMPROTO][NF_MAX_HOOKS];
-
-#if defined(CONFIG_JUMP_LABEL)
-#include <linux/static_key.h>
-extern struct static_key nf_hooks_needed[NFPROTO_NUMPROTO][NF_MAX_HOOKS];
-static inline bool nf_hooks_active(u_int8_t pf, unsigned int hook)
-{
-	if (__builtin_constant_p(pf) &&
-	    __builtin_constant_p(hook))
-		return static_key_false(&nf_hooks_needed[pf][hook]);
-
-	return !list_empty(&nf_hooks[pf][hook]);
-}
-#else
-static inline bool nf_hooks_active(u_int8_t pf, unsigned int hook)
-{
-	return !list_empty(&nf_hooks[pf][hook]);
-}
-#endif
-
-int nf_hook_slow(u_int8_t pf, unsigned int hook, struct sk_buff *skb,
-		 struct net_device *indev, struct net_device *outdev,
-		 int (*okfn)(struct sk_buff *), int thresh);
-
-/**
- *	nf_hook_thresh - call a netfilter hook
- *	
- *	Returns 1 if the hook has allowed the packet to pass.  The function
- *	okfn must be invoked by the caller in this case.  Any other return
- *	value indicates the packet has been consumed by the hook.
- */
-static inline int nf_hook_thresh(u_int8_t pf, unsigned int hook,
-				 struct sk_buff *skb,
-				 struct net_device *indev,
-				 struct net_device *outdev,
-				 int (*okfn)(struct sk_buff *), int thresh)
-{
-	if (nf_hooks_active(pf, hook))
-		return nf_hook_slow(pf, hook, skb, indev, outdev, okfn, thresh);
-	return 1;
-}
-
-static inline int nf_hook(u_int8_t pf, unsigned int hook, struct sk_buff *skb,
-			  struct net_device *indev, struct net_device *outdev,
-			  int (*okfn)(struct sk_buff *))
-{
-	return nf_hook_thresh(pf, hook, skb, indev, outdev, okfn, INT_MIN);
-}
-                   
-/* Activate hook; either okfn or kfree_skb called, unless a hook
-   returns NF_STOLEN (in which case, it's up to the hook to deal with
-   the consequences).
-
-   Returns -ERRNO if packet dropped.  Zero means queued, stolen or
-   accepted.
-*/
-
-/* RR:
-   > I don't want nf_hook to return anything because people might forget
-   > about async and trust the return value to mean "packet was ok".
-
-   AK:
-   Just document it clearly, then you can expect some sense from kernel
-   coders :)
-*/
-
-static inline int
-NF_HOOK_THRESH(uint8_t pf, unsigned int hook, struct sk_buff *skb,
-	       struct net_device *in, struct net_device *out,
-	       int (*okfn)(struct sk_buff *), int thresh)
-{
-	int ret = nf_hook_thresh(pf, hook, skb, in, out, okfn, thresh);
-	if (ret == 1)
-		ret = okfn(skb);
-	return ret;
-}
-
-static inline int
-NF_HOOK_COND(uint8_t pf, unsigned int hook, struct sk_buff *skb,
-	     struct net_device *in, struct net_device *out,
-	     int (*okfn)(struct sk_buff *), bool cond)
-{
-	int ret;
-
-	if (!cond ||
-	    ((ret = nf_hook_thresh(pf, hook, skb, in, out, okfn, INT_MIN)) == 1))
-		ret = okfn(skb);
-	return ret;
-}
-
-static inline int
-NF_HOOK(uint8_t pf, unsigned int hook, struct sk_buff *skb,
-	struct net_device *in, struct net_device *out,
-	int (*okfn)(struct sk_buff *))
-{
-	return NF_HOOK_THRESH(pf, hook, skb, in, out, okfn, INT_MIN);
-}
-
-/* Call setsockopt() */
-int nf_setsockopt(struct sock *sk, u_int8_t pf, int optval, char __user *opt,
-		  unsigned int len);
-int nf_getsockopt(struct sock *sk, u_int8_t pf, int optval, char __user *opt,
-		  int *len);
-#ifdef CONFIG_COMPAT
-int compat_nf_setsockopt(struct sock *sk, u_int8_t pf, int optval,
-		char __user *opt, unsigned int len);
-int compat_nf_getsockopt(struct sock *sk, u_int8_t pf, int optval,
-		char __user *opt, int *len);
-#endif
-
-/* Call this before modifying an existing packet: ensures it is
-   modifiable and linear to the point you care about (writable_len).
-   Returns true or false. */
-extern int skb_make_writable(struct sk_buff *skb, unsigned int writable_len);
-
-struct flowi;
-struct nf_queue_entry;
-
-struct nf_afinfo {
-	unsigned short	family;
-	__sum16		(*checksum)(struct sk_buff *skb, unsigned int hook,
-				    unsigned int dataoff, u_int8_t protocol);
-	__sum16		(*checksum_partial)(struct sk_buff *skb,
-					    unsigned int hook,
-					    unsigned int dataoff,
-					    unsigned int len,
-					    u_int8_t protocol);
-	int		(*route)(struct net *net, struct dst_entry **dst,
-				 struct flowi *fl, bool strict);
-	void		(*saveroute)(const struct sk_buff *skb,
-				     struct nf_queue_entry *entry);
-	int		(*reroute)(struct sk_buff *skb,
-				   const struct nf_queue_entry *entry);
-	int		route_key_size;
-};
-
-extern const struct nf_afinfo __rcu *nf_afinfo[NFPROTO_NUMPROTO];
-static inline const struct nf_afinfo *nf_get_afinfo(unsigned short family)
-{
-	return rcu_dereference(nf_afinfo[family]);
-}
-
-static inline __sum16
-nf_checksum(struct sk_buff *skb, unsigned int hook, unsigned int dataoff,
-	    u_int8_t protocol, unsigned short family)
-{
-	const struct nf_afinfo *afinfo;
-	__sum16 csum = 0;
-
-	rcu_read_lock();
-	afinfo = nf_get_afinfo(family);
-	if (afinfo)
-		csum = afinfo->checksum(skb, hook, dataoff, protocol);
-	rcu_read_unlock();
-	return csum;
-}
-
-static inline __sum16
-nf_checksum_partial(struct sk_buff *skb, unsigned int hook,
-		    unsigned int dataoff, unsigned int len,
-		    u_int8_t protocol, unsigned short family)
-{
-	const struct nf_afinfo *afinfo;
-	__sum16 csum = 0;
-
-	rcu_read_lock();
-	afinfo = nf_get_afinfo(family);
-	if (afinfo)
-		csum = afinfo->checksum_partial(skb, hook, dataoff, len,
-						protocol);
-	rcu_read_unlock();
-	return csum;
-}
-
-extern int nf_register_afinfo(const struct nf_afinfo *afinfo);
-extern void nf_unregister_afinfo(const struct nf_afinfo *afinfo);
-
-#include <net/flow.h>
-extern void (*ip_nat_decode_session)(struct sk_buff *, struct flowi *);
-
-static inline void
-nf_nat_decode_session(struct sk_buff *skb, struct flowi *fl, u_int8_t family)
-{
-#ifdef CONFIG_NF_NAT_NEEDED
-	void (*decodefn)(struct sk_buff *, struct flowi *);
-
-	if (family == AF_INET) {
-		rcu_read_lock();
-		decodefn = rcu_dereference(ip_nat_decode_session);
-		if (decodefn)
-			decodefn(skb, fl);
-		rcu_read_unlock();
-	}
-#endif
-}
-
-#ifdef CONFIG_PROC_FS
-#include <linux/proc_fs.h>
-extern struct proc_dir_entry *proc_net_netfilter;
-#endif
-
-#else /* !CONFIG_NETFILTER */
-#define NF_HOOK(pf, hook, skb, indev, outdev, okfn) (okfn)(skb)
-#define NF_HOOK_COND(pf, hook, skb, indev, outdev, okfn, cond) (okfn)(skb)
-static inline int nf_hook_thresh(u_int8_t pf, unsigned int hook,
-				 struct sk_buff *skb,
-				 struct net_device *indev,
-				 struct net_device *outdev,
-				 int (*okfn)(struct sk_buff *), int thresh)
-{
-	return okfn(skb);
-}
-static inline int nf_hook(u_int8_t pf, unsigned int hook, struct sk_buff *skb,
-			  struct net_device *indev, struct net_device *outdev,
-			  int (*okfn)(struct sk_buff *))
-{
-	return 1;
-}
-struct flowi;
-static inline void
-nf_nat_decode_session(struct sk_buff *skb, struct flowi *fl, u_int8_t family)
-{
-}
-#endif /*CONFIG_NETFILTER*/
-
-#if defined(CONFIG_NF_CONNTRACK) || defined(CONFIG_NF_CONNTRACK_MODULE)
-extern void (*ip_ct_attach)(struct sk_buff *, struct sk_buff *) __rcu;
-extern void nf_ct_attach(struct sk_buff *, struct sk_buff *);
-extern void (*nf_ct_destroy)(struct nf_conntrack *) __rcu;
-#else
-static inline void nf_ct_attach(struct sk_buff *new, struct sk_buff *skb) {}
-#endif
-
-#endif /*__KERNEL__*/
-#endif /*__LINUX_NETFILTER_H*/
diff --git a/ANDROID_3.4.5/include/linux/netfilter/Kbuild b/ANDROID_3.4.5/include/linux/netfilter/Kbuild
deleted file mode 100644
index 16970363..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter/Kbuild
+++ /dev/null
@@ -1,77 +0,0 @@
-header-y += ipset/
-
-header-y += nf_conntrack_common.h
-header-y += nf_conntrack_ftp.h
-header-y += nf_conntrack_sctp.h
-header-y += nf_conntrack_tcp.h
-header-y += nf_conntrack_tuple_common.h
-header-y += nf_nat.h
-header-y += nfnetlink.h
-header-y += nfnetlink_acct.h
-header-y += nfnetlink_compat.h
-header-y += nfnetlink_conntrack.h
-header-y += nfnetlink_cttimeout.h
-header-y += nfnetlink_log.h
-header-y += nfnetlink_queue.h
-header-y += x_tables.h
-header-y += xt_AUDIT.h
-header-y += xt_CHECKSUM.h
-header-y += xt_CLASSIFY.h
-header-y += xt_CONNMARK.h
-header-y += xt_CONNSECMARK.h
-header-y += xt_CT.h
-header-y += xt_DSCP.h
-header-y += xt_IDLETIMER.h
-header-y += xt_LED.h
-header-y += xt_LOG.h
-header-y += xt_MARK.h
-header-y += xt_nfacct.h
-header-y += xt_NFLOG.h
-header-y += xt_NFQUEUE.h
-header-y += xt_RATEEST.h
-header-y += xt_SECMARK.h
-header-y += xt_TCPMSS.h
-header-y += xt_TCPOPTSTRIP.h
-header-y += xt_TEE.h
-header-y += xt_TPROXY.h
-header-y += xt_addrtype.h
-header-y += xt_cluster.h
-header-y += xt_comment.h
-header-y += xt_connbytes.h
-header-y += xt_connlimit.h
-header-y += xt_connmark.h
-header-y += xt_conntrack.h
-header-y += xt_cpu.h
-header-y += xt_dccp.h
-header-y += xt_devgroup.h
-header-y += xt_dscp.h
-header-y += xt_ecn.h
-header-y += xt_esp.h
-header-y += xt_hashlimit.h
-header-y += xt_helper.h
-header-y += xt_iprange.h
-header-y += xt_ipvs.h
-header-y += xt_length.h
-header-y += xt_limit.h
-header-y += xt_mac.h
-header-y += xt_mark.h
-header-y += xt_multiport.h
-header-y += xt_osf.h
-header-y += xt_owner.h
-header-y += xt_physdev.h
-header-y += xt_pkttype.h
-header-y += xt_policy.h
-header-y += xt_quota.h
-header-y += xt_rateest.h
-header-y += xt_realm.h
-header-y += xt_recent.h
-header-y += xt_set.h
-header-y += xt_sctp.h
-header-y += xt_socket.h
-header-y += xt_state.h
-header-y += xt_statistic.h
-header-y += xt_string.h
-header-y += xt_tcpmss.h
-header-y += xt_tcpudp.h
-header-y += xt_time.h
-header-y += xt_u32.h
diff --git a/ANDROID_3.4.5/include/linux/netfilter/ipset/Kbuild b/ANDROID_3.4.5/include/linux/netfilter/ipset/Kbuild
deleted file mode 100644
index 601fe71d..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter/ipset/Kbuild
+++ /dev/null
@@ -1,4 +0,0 @@
-header-y += ip_set.h
-header-y += ip_set_bitmap.h
-header-y += ip_set_hash.h
-header-y += ip_set_list.h
diff --git a/ANDROID_3.4.5/include/linux/netfilter/ipset/ip_set.h b/ANDROID_3.4.5/include/linux/netfilter/ipset/ip_set.h
deleted file mode 100644
index 2f8e18a2..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter/ipset/ip_set.h
+++ /dev/null
@@ -1,489 +0,0 @@
-#ifndef _IP_SET_H
-#define _IP_SET_H
-
-/* Copyright (C) 2000-2002 Joakim Axelsson <gozem@linux.nu>
- *                         Patrick Schaaf <bof@bof.de>
- *                         Martin Josefsson <gandalf@wlug.westbo.se>
- * Copyright (C) 2003-2011 Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/types.h>
-
-/* The protocol version */
-#define IPSET_PROTOCOL		6
-
-/* The max length of strings including NUL: set and type identifiers */
-#define IPSET_MAXNAMELEN	32
-
-/* Message types and commands */
-enum ipset_cmd {
-	IPSET_CMD_NONE,
-	IPSET_CMD_PROTOCOL,	/* 1: Return protocol version */
-	IPSET_CMD_CREATE,	/* 2: Create a new (empty) set */
-	IPSET_CMD_DESTROY,	/* 3: Destroy a (empty) set */
-	IPSET_CMD_FLUSH,	/* 4: Remove all elements from a set */
-	IPSET_CMD_RENAME,	/* 5: Rename a set */
-	IPSET_CMD_SWAP,		/* 6: Swap two sets */
-	IPSET_CMD_LIST,		/* 7: List sets */
-	IPSET_CMD_SAVE,		/* 8: Save sets */
-	IPSET_CMD_ADD,		/* 9: Add an element to a set */
-	IPSET_CMD_DEL,		/* 10: Delete an element from a set */
-	IPSET_CMD_TEST,		/* 11: Test an element in a set */
-	IPSET_CMD_HEADER,	/* 12: Get set header data only */
-	IPSET_CMD_TYPE,		/* 13: Get set type */
-	IPSET_MSG_MAX,		/* Netlink message commands */
-
-	/* Commands in userspace: */
-	IPSET_CMD_RESTORE = IPSET_MSG_MAX, /* 14: Enter restore mode */
-	IPSET_CMD_HELP,		/* 15: Get help */
-	IPSET_CMD_VERSION,	/* 16: Get program version */
-	IPSET_CMD_QUIT,		/* 17: Quit from interactive mode */
-
-	IPSET_CMD_MAX,
-
-	IPSET_CMD_COMMIT = IPSET_CMD_MAX, /* 18: Commit buffered commands */
-};
-
-/* Attributes at command level */
-enum {
-	IPSET_ATTR_UNSPEC,
-	IPSET_ATTR_PROTOCOL,	/* 1: Protocol version */
-	IPSET_ATTR_SETNAME,	/* 2: Name of the set */
-	IPSET_ATTR_TYPENAME,	/* 3: Typename */
-	IPSET_ATTR_SETNAME2 = IPSET_ATTR_TYPENAME, /* Setname at rename/swap */
-	IPSET_ATTR_REVISION,	/* 4: Settype revision */
-	IPSET_ATTR_FAMILY,	/* 5: Settype family */
-	IPSET_ATTR_FLAGS,	/* 6: Flags at command level */
-	IPSET_ATTR_DATA,	/* 7: Nested attributes */
-	IPSET_ATTR_ADT,		/* 8: Multiple data containers */
-	IPSET_ATTR_LINENO,	/* 9: Restore lineno */
-	IPSET_ATTR_PROTOCOL_MIN, /* 10: Minimal supported version number */
-	IPSET_ATTR_REVISION_MIN	= IPSET_ATTR_PROTOCOL_MIN, /* type rev min */
-	__IPSET_ATTR_CMD_MAX,
-};
-#define IPSET_ATTR_CMD_MAX	(__IPSET_ATTR_CMD_MAX - 1)
-
-/* CADT specific attributes */
-enum {
-	IPSET_ATTR_IP = IPSET_ATTR_UNSPEC + 1,
-	IPSET_ATTR_IP_FROM = IPSET_ATTR_IP,
-	IPSET_ATTR_IP_TO,	/* 2 */
-	IPSET_ATTR_CIDR,	/* 3 */
-	IPSET_ATTR_PORT,	/* 4 */
-	IPSET_ATTR_PORT_FROM = IPSET_ATTR_PORT,
-	IPSET_ATTR_PORT_TO,	/* 5 */
-	IPSET_ATTR_TIMEOUT,	/* 6 */
-	IPSET_ATTR_PROTO,	/* 7 */
-	IPSET_ATTR_CADT_FLAGS,	/* 8 */
-	IPSET_ATTR_CADT_LINENO = IPSET_ATTR_LINENO,	/* 9 */
-	/* Reserve empty slots */
-	IPSET_ATTR_CADT_MAX = 16,
-	/* Create-only specific attributes */
-	IPSET_ATTR_GC,
-	IPSET_ATTR_HASHSIZE,
-	IPSET_ATTR_MAXELEM,
-	IPSET_ATTR_NETMASK,
-	IPSET_ATTR_PROBES,
-	IPSET_ATTR_RESIZE,
-	IPSET_ATTR_SIZE,
-	/* Kernel-only */
-	IPSET_ATTR_ELEMENTS,
-	IPSET_ATTR_REFERENCES,
-	IPSET_ATTR_MEMSIZE,
-
-	__IPSET_ATTR_CREATE_MAX,
-};
-#define IPSET_ATTR_CREATE_MAX	(__IPSET_ATTR_CREATE_MAX - 1)
-
-/* ADT specific attributes */
-enum {
-	IPSET_ATTR_ETHER = IPSET_ATTR_CADT_MAX + 1,
-	IPSET_ATTR_NAME,
-	IPSET_ATTR_NAMEREF,
-	IPSET_ATTR_IP2,
-	IPSET_ATTR_CIDR2,
-	IPSET_ATTR_IP2_TO,
-	IPSET_ATTR_IFACE,
-	__IPSET_ATTR_ADT_MAX,
-};
-#define IPSET_ATTR_ADT_MAX	(__IPSET_ATTR_ADT_MAX - 1)
-
-/* IP specific attributes */
-enum {
-	IPSET_ATTR_IPADDR_IPV4 = IPSET_ATTR_UNSPEC + 1,
-	IPSET_ATTR_IPADDR_IPV6,
-	__IPSET_ATTR_IPADDR_MAX,
-};
-#define IPSET_ATTR_IPADDR_MAX	(__IPSET_ATTR_IPADDR_MAX - 1)
-
-/* Error codes */
-enum ipset_errno {
-	IPSET_ERR_PRIVATE = 4096,
-	IPSET_ERR_PROTOCOL,
-	IPSET_ERR_FIND_TYPE,
-	IPSET_ERR_MAX_SETS,
-	IPSET_ERR_BUSY,
-	IPSET_ERR_EXIST_SETNAME2,
-	IPSET_ERR_TYPE_MISMATCH,
-	IPSET_ERR_EXIST,
-	IPSET_ERR_INVALID_CIDR,
-	IPSET_ERR_INVALID_NETMASK,
-	IPSET_ERR_INVALID_FAMILY,
-	IPSET_ERR_TIMEOUT,
-	IPSET_ERR_REFERENCED,
-	IPSET_ERR_IPADDR_IPV4,
-	IPSET_ERR_IPADDR_IPV6,
-
-	/* Type specific error codes */
-	IPSET_ERR_TYPE_SPECIFIC = 4352,
-};
-
-/* Flags at command level */
-enum ipset_cmd_flags {
-	IPSET_FLAG_BIT_EXIST	= 0,
-	IPSET_FLAG_EXIST	= (1 << IPSET_FLAG_BIT_EXIST),
-	IPSET_FLAG_BIT_LIST_SETNAME = 1,
-	IPSET_FLAG_LIST_SETNAME	= (1 << IPSET_FLAG_BIT_LIST_SETNAME),
-	IPSET_FLAG_BIT_LIST_HEADER = 2,
-	IPSET_FLAG_LIST_HEADER	= (1 << IPSET_FLAG_BIT_LIST_HEADER),
-	IPSET_FLAG_CMD_MAX = 15,	/* Lower half */
-};
-
-/* Flags at CADT attribute level */
-enum ipset_cadt_flags {
-	IPSET_FLAG_BIT_BEFORE	= 0,
-	IPSET_FLAG_BEFORE	= (1 << IPSET_FLAG_BIT_BEFORE),
-	IPSET_FLAG_BIT_PHYSDEV	= 1,
-	IPSET_FLAG_PHYSDEV	= (1 << IPSET_FLAG_BIT_PHYSDEV),
-	IPSET_FLAG_BIT_NOMATCH	= 2,
-	IPSET_FLAG_NOMATCH	= (1 << IPSET_FLAG_BIT_NOMATCH),
-	IPSET_FLAG_CADT_MAX	= 15,	/* Upper half */
-};
-
-/* Commands with settype-specific attributes */
-enum ipset_adt {
-	IPSET_ADD,
-	IPSET_DEL,
-	IPSET_TEST,
-	IPSET_ADT_MAX,
-	IPSET_CREATE = IPSET_ADT_MAX,
-	IPSET_CADT_MAX,
-};
-
-/* Sets are identified by an index in kernel space. Tweak with ip_set_id_t
- * and IPSET_INVALID_ID if you want to increase the max number of sets.
- */
-typedef __u16 ip_set_id_t;
-
-#define IPSET_INVALID_ID		65535
-
-enum ip_set_dim {
-	IPSET_DIM_ZERO = 0,
-	IPSET_DIM_ONE,
-	IPSET_DIM_TWO,
-	IPSET_DIM_THREE,
-	/* Max dimension in elements.
-	 * If changed, new revision of iptables match/target is required.
-	 */
-	IPSET_DIM_MAX = 6,
-};
-
-/* Option flags for kernel operations */
-enum ip_set_kopt {
-	IPSET_INV_MATCH = (1 << IPSET_DIM_ZERO),
-	IPSET_DIM_ONE_SRC = (1 << IPSET_DIM_ONE),
-	IPSET_DIM_TWO_SRC = (1 << IPSET_DIM_TWO),
-	IPSET_DIM_THREE_SRC = (1 << IPSET_DIM_THREE),
-};
-
-#ifdef __KERNEL__
-#include <linux/ip.h>
-#include <linux/ipv6.h>
-#include <linux/netlink.h>
-#include <linux/netfilter.h>
-#include <linux/netfilter/x_tables.h>
-#include <linux/vmalloc.h>
-#include <net/netlink.h>
-
-/* Set features */
-enum ip_set_feature {
-	IPSET_TYPE_IP_FLAG = 0,
-	IPSET_TYPE_IP = (1 << IPSET_TYPE_IP_FLAG),
-	IPSET_TYPE_PORT_FLAG = 1,
-	IPSET_TYPE_PORT = (1 << IPSET_TYPE_PORT_FLAG),
-	IPSET_TYPE_MAC_FLAG = 2,
-	IPSET_TYPE_MAC = (1 << IPSET_TYPE_MAC_FLAG),
-	IPSET_TYPE_IP2_FLAG = 3,
-	IPSET_TYPE_IP2 = (1 << IPSET_TYPE_IP2_FLAG),
-	IPSET_TYPE_NAME_FLAG = 4,
-	IPSET_TYPE_NAME = (1 << IPSET_TYPE_NAME_FLAG),
-	IPSET_TYPE_IFACE_FLAG = 5,
-	IPSET_TYPE_IFACE = (1 << IPSET_TYPE_IFACE_FLAG),
-	/* Strictly speaking not a feature, but a flag for dumping:
-	 * this settype must be dumped last */
-	IPSET_DUMP_LAST_FLAG = 7,
-	IPSET_DUMP_LAST = (1 << IPSET_DUMP_LAST_FLAG),
-};
-
-struct ip_set;
-
-typedef int (*ipset_adtfn)(struct ip_set *set, void *value,
-			   u32 timeout, u32 flags);
-
-/* Kernel API function options */
-struct ip_set_adt_opt {
-	u8 family;		/* Actual protocol family */
-	u8 dim;			/* Dimension of match/target */
-	u8 flags;		/* Direction and negation flags */
-	u32 cmdflags;		/* Command-like flags */
-	u32 timeout;		/* Timeout value */
-};
-
-/* Set type, variant-specific part */
-struct ip_set_type_variant {
-	/* Kernelspace: test/add/del entries
-	 *		returns negative error code,
-	 *			zero for no match/success to add/delete
-	 *			positive for matching element */
-	int (*kadt)(struct ip_set *set, const struct sk_buff * skb,
-		    const struct xt_action_param *par,
-		    enum ipset_adt adt, const struct ip_set_adt_opt *opt);
-
-	/* Userspace: test/add/del entries
-	 *		returns negative error code,
-	 *			zero for no match/success to add/delete
-	 *			positive for matching element */
-	int (*uadt)(struct ip_set *set, struct nlattr *tb[],
-		    enum ipset_adt adt, u32 *lineno, u32 flags, bool retried);
-
-	/* Low level add/del/test functions */
-	ipset_adtfn adt[IPSET_ADT_MAX];
-
-	/* When adding entries and set is full, try to resize the set */
-	int (*resize)(struct ip_set *set, bool retried);
-	/* Destroy the set */
-	void (*destroy)(struct ip_set *set);
-	/* Flush the elements */
-	void (*flush)(struct ip_set *set);
-	/* Expire entries before listing */
-	void (*expire)(struct ip_set *set);
-	/* List set header data */
-	int (*head)(struct ip_set *set, struct sk_buff *skb);
-	/* List elements */
-	int (*list)(const struct ip_set *set, struct sk_buff *skb,
-		    struct netlink_callback *cb);
-
-	/* Return true if "b" set is the same as "a"
-	 * according to the create set parameters */
-	bool (*same_set)(const struct ip_set *a, const struct ip_set *b);
-};
-
-/* The core set type structure */
-struct ip_set_type {
-	struct list_head list;
-
-	/* Typename */
-	char name[IPSET_MAXNAMELEN];
-	/* Protocol version */
-	u8 protocol;
-	/* Set features to control swapping */
-	u8 features;
-	/* Set type dimension */
-	u8 dimension;
-	/*
-	 * Supported family: may be NFPROTO_UNSPEC for both
-	 * NFPROTO_IPV4/NFPROTO_IPV6.
-	 */
-	u8 family;
-	/* Type revisions */
-	u8 revision_min, revision_max;
-
-	/* Create set */
-	int (*create)(struct ip_set *set, struct nlattr *tb[], u32 flags);
-
-	/* Attribute policies */
-	const struct nla_policy create_policy[IPSET_ATTR_CREATE_MAX + 1];
-	const struct nla_policy adt_policy[IPSET_ATTR_ADT_MAX + 1];
-
-	/* Set this to THIS_MODULE if you are a module, otherwise NULL */
-	struct module *me;
-};
-
-/* register and unregister set type */
-extern int ip_set_type_register(struct ip_set_type *set_type);
-extern void ip_set_type_unregister(struct ip_set_type *set_type);
-
-/* A generic IP set */
-struct ip_set {
-	/* The name of the set */
-	char name[IPSET_MAXNAMELEN];
-	/* Lock protecting the set data */
-	rwlock_t lock;
-	/* References to the set */
-	u32 ref;
-	/* The core set type */
-	struct ip_set_type *type;
-	/* The type variant doing the real job */
-	const struct ip_set_type_variant *variant;
-	/* The actual INET family of the set */
-	u8 family;
-	/* The type revision */
-	u8 revision;
-	/* The type specific data */
-	void *data;
-};
-
-/* register and unregister set references */
-extern ip_set_id_t ip_set_get_byname(const char *name, struct ip_set **set);
-extern void ip_set_put_byindex(ip_set_id_t index);
-extern const char *ip_set_name_byindex(ip_set_id_t index);
-extern ip_set_id_t ip_set_nfnl_get(const char *name);
-extern ip_set_id_t ip_set_nfnl_get_byindex(ip_set_id_t index);
-extern void ip_set_nfnl_put(ip_set_id_t index);
-
-/* API for iptables set match, and SET target */
-
-extern int ip_set_add(ip_set_id_t id, const struct sk_buff *skb,
-		      const struct xt_action_param *par,
-		      const struct ip_set_adt_opt *opt);
-extern int ip_set_del(ip_set_id_t id, const struct sk_buff *skb,
-		      const struct xt_action_param *par,
-		      const struct ip_set_adt_opt *opt);
-extern int ip_set_test(ip_set_id_t id, const struct sk_buff *skb,
-		       const struct xt_action_param *par,
-		       const struct ip_set_adt_opt *opt);
-
-/* Utility functions */
-extern void *ip_set_alloc(size_t size);
-extern void ip_set_free(void *members);
-extern int ip_set_get_ipaddr4(struct nlattr *nla,  __be32 *ipaddr);
-extern int ip_set_get_ipaddr6(struct nlattr *nla, union nf_inet_addr *ipaddr);
-
-static inline int
-ip_set_get_hostipaddr4(struct nlattr *nla, u32 *ipaddr)
-{
-	__be32 ip;
-	int ret = ip_set_get_ipaddr4(nla, &ip);
-
-	if (ret)
-		return ret;
-	*ipaddr = ntohl(ip);
-	return 0;
-}
-
-/* Ignore IPSET_ERR_EXIST errors if asked to do so? */
-static inline bool
-ip_set_eexist(int ret, u32 flags)
-{
-	return ret == -IPSET_ERR_EXIST && (flags & IPSET_FLAG_EXIST);
-}
-
-/* Check the NLA_F_NET_BYTEORDER flag */
-static inline bool
-ip_set_attr_netorder(struct nlattr *tb[], int type)
-{
-	return tb[type] && (tb[type]->nla_type & NLA_F_NET_BYTEORDER);
-}
-
-static inline bool
-ip_set_optattr_netorder(struct nlattr *tb[], int type)
-{
-	return !tb[type] || (tb[type]->nla_type & NLA_F_NET_BYTEORDER);
-}
-
-/* Useful converters */
-static inline u32
-ip_set_get_h32(const struct nlattr *attr)
-{
-	return ntohl(nla_get_be32(attr));
-}
-
-static inline u16
-ip_set_get_h16(const struct nlattr *attr)
-{
-	return ntohs(nla_get_be16(attr));
-}
-
-#define ipset_nest_start(skb, attr) nla_nest_start(skb, attr | NLA_F_NESTED)
-#define ipset_nest_end(skb, start)  nla_nest_end(skb, start)
-
-#define NLA_PUT_IPADDR4(skb, type, ipaddr)			\
-do {								\
-	struct nlattr *__nested = ipset_nest_start(skb, type);	\
-								\
-	if (!__nested)						\
-		goto nla_put_failure;				\
-	NLA_PUT_NET32(skb, IPSET_ATTR_IPADDR_IPV4, ipaddr);	\
-	ipset_nest_end(skb, __nested);				\
-} while (0)
-
-#define NLA_PUT_IPADDR6(skb, type, ipaddrptr)			\
-do {								\
-	struct nlattr *__nested = ipset_nest_start(skb, type);	\
-								\
-	if (!__nested)						\
-		goto nla_put_failure;				\
-	NLA_PUT(skb, IPSET_ATTR_IPADDR_IPV6,			\
-		sizeof(struct in6_addr), ipaddrptr);		\
-	ipset_nest_end(skb, __nested);				\
-} while (0)
-
-/* Get address from skbuff */
-static inline __be32
-ip4addr(const struct sk_buff *skb, bool src)
-{
-	return src ? ip_hdr(skb)->saddr : ip_hdr(skb)->daddr;
-}
-
-static inline void
-ip4addrptr(const struct sk_buff *skb, bool src, __be32 *addr)
-{
-	*addr = src ? ip_hdr(skb)->saddr : ip_hdr(skb)->daddr;
-}
-
-static inline void
-ip6addrptr(const struct sk_buff *skb, bool src, struct in6_addr *addr)
-{
-	memcpy(addr, src ? &ipv6_hdr(skb)->saddr : &ipv6_hdr(skb)->daddr,
-	       sizeof(*addr));
-}
-
-/* Calculate the bytes required to store the inclusive range of a-b */
-static inline int
-bitmap_bytes(u32 a, u32 b)
-{
-	return 4 * ((((b - a + 8) / 8) + 3) / 4);
-}
-
-#endif /* __KERNEL__ */
-
-/* Interface to iptables/ip6tables */
-
-#define SO_IP_SET		83
-
-union ip_set_name_index {
-	char name[IPSET_MAXNAMELEN];
-	ip_set_id_t index;
-};
-
-#define IP_SET_OP_GET_BYNAME	0x00000006	/* Get set index by name */
-struct ip_set_req_get_set {
-	unsigned op;
-	unsigned version;
-	union ip_set_name_index set;
-};
-
-#define IP_SET_OP_GET_BYINDEX	0x00000007	/* Get set name by index */
-/* Uses ip_set_req_get_set */
-
-#define IP_SET_OP_VERSION	0x00000100	/* Ask kernel version */
-struct ip_set_req_version {
-	unsigned op;
-	unsigned version;
-};
-
-#endif /*_IP_SET_H */
diff --git a/ANDROID_3.4.5/include/linux/netfilter/ipset/ip_set_ahash.h b/ANDROID_3.4.5/include/linux/netfilter/ipset/ip_set_ahash.h
deleted file mode 100644
index 230a290e..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter/ipset/ip_set_ahash.h
+++ /dev/null
@@ -1,1214 +0,0 @@
-#ifndef _IP_SET_AHASH_H
-#define _IP_SET_AHASH_H
-
-#include <linux/rcupdate.h>
-#include <linux/jhash.h>
-#include <linux/netfilter/ipset/ip_set_timeout.h>
-
-#define CONCAT(a, b, c)		a##b##c
-#define TOKEN(a, b, c)		CONCAT(a, b, c)
-
-#define type_pf_next		TOKEN(TYPE, PF, _elem)
-
-/* Hashing which uses arrays to resolve clashing. The hash table is resized
- * (doubled) when searching becomes too long.
- * Internally jhash is used with the assumption that the size of the
- * stored data is a multiple of sizeof(u32). If storage supports timeout,
- * the timeout field must be the last one in the data structure - that field
- * is ignored when computing the hash key.
- *
- * Readers and resizing
- *
- * Resizing can be triggered by userspace command only, and those
- * are serialized by the nfnl mutex. During resizing the set is
- * read-locked, so the only possible concurrent operations are
- * the kernel side readers. Those must be protected by proper RCU locking.
- */
-
-/* Number of elements to store in an initial array block */
-#define AHASH_INIT_SIZE			4
-/* Max number of elements to store in an array block */
-#define AHASH_MAX_SIZE			(3*AHASH_INIT_SIZE)
-
-/* Max number of elements can be tuned */
-#ifdef IP_SET_HASH_WITH_MULTI
-#define AHASH_MAX(h)			((h)->ahash_max)
-
-static inline u8
-tune_ahash_max(u8 curr, u32 multi)
-{
-	u32 n;
-
-	if (multi < curr)
-		return curr;
-
-	n = curr + AHASH_INIT_SIZE;
-	/* Currently, at listing one hash bucket must fit into a message.
-	 * Therefore we have a hard limit here.
-	 */
-	return n > curr && n <= 64 ? n : curr;
-}
-#define TUNE_AHASH_MAX(h, multi)	\
-	((h)->ahash_max = tune_ahash_max((h)->ahash_max, multi))
-#else
-#define AHASH_MAX(h)			AHASH_MAX_SIZE
-#define TUNE_AHASH_MAX(h, multi)
-#endif
-
-/* A hash bucket */
-struct hbucket {
-	void *value;		/* the array of the values */
-	u8 size;		/* size of the array */
-	u8 pos;			/* position of the first free entry */
-};
-
-/* The hash table: the table size stored here in order to make resizing easy */
-struct htable {
-	u8 htable_bits;		/* size of hash table == 2^htable_bits */
-	struct hbucket bucket[0]; /* hashtable buckets */
-};
-
-#define hbucket(h, i)		(&((h)->bucket[i]))
-
-/* Book-keeping of the prefixes added to the set */
-struct ip_set_hash_nets {
-	u8 cidr;		/* the different cidr values in the set */
-	u32 nets;		/* number of elements per cidr */
-};
-
-/* The generic ip_set hash structure */
-struct ip_set_hash {
-	struct htable *table;	/* the hash table */
-	u32 maxelem;		/* max elements in the hash */
-	u32 elements;		/* current element (vs timeout) */
-	u32 initval;		/* random jhash init value */
-	u32 timeout;		/* timeout value, if enabled */
-	struct timer_list gc;	/* garbage collection when timeout enabled */
-	struct type_pf_next next; /* temporary storage for uadd */
-#ifdef IP_SET_HASH_WITH_MULTI
-	u8 ahash_max;		/* max elements in an array block */
-#endif
-#ifdef IP_SET_HASH_WITH_NETMASK
-	u8 netmask;		/* netmask value for subnets to store */
-#endif
-#ifdef IP_SET_HASH_WITH_RBTREE
-	struct rb_root rbtree;
-#endif
-#ifdef IP_SET_HASH_WITH_NETS
-	struct ip_set_hash_nets nets[0]; /* book-keeping of prefixes */
-#endif
-};
-
-static size_t
-htable_size(u8 hbits)
-{
-	size_t hsize;
-
-	/* We must fit both into u32 in jhash and size_t */
-	if (hbits > 31)
-		return 0;
-	hsize = jhash_size(hbits);
-	if ((((size_t)-1) - sizeof(struct htable))/sizeof(struct hbucket)
-	    < hsize)
-		return 0;
-
-	return hsize * sizeof(struct hbucket) + sizeof(struct htable);
-}
-
-/* Compute htable_bits from the user input parameter hashsize */
-static u8
-htable_bits(u32 hashsize)
-{
-	/* Assume that hashsize == 2^htable_bits */
-	u8 bits = fls(hashsize - 1);
-	if (jhash_size(bits) != hashsize)
-		/* Round up to the first 2^n value */
-		bits = fls(hashsize);
-
-	return bits;
-}
-
-#ifdef IP_SET_HASH_WITH_NETS
-#ifdef IP_SET_HASH_WITH_NETS_PACKED
-/* When cidr is packed with nomatch, cidr - 1 is stored in the entry */
-#define CIDR(cidr)	(cidr + 1)
-#else
-#define CIDR(cidr)	(cidr)
-#endif
-
-#define SET_HOST_MASK(family)	(family == AF_INET ? 32 : 128)
-
-/* Network cidr size book keeping when the hash stores different
- * sized networks */
-static void
-add_cidr(struct ip_set_hash *h, u8 cidr, u8 host_mask)
-{
-	u8 i;
-
-	++h->nets[cidr-1].nets;
-
-	pr_debug("add_cidr added %u: %u\n", cidr, h->nets[cidr-1].nets);
-
-	if (h->nets[cidr-1].nets > 1)
-		return;
-
-	/* New cidr size */
-	for (i = 0; i < host_mask && h->nets[i].cidr; i++) {
-		/* Add in increasing prefix order, so larger cidr first */
-		if (h->nets[i].cidr < cidr)
-			swap(h->nets[i].cidr, cidr);
-	}
-	if (i < host_mask)
-		h->nets[i].cidr = cidr;
-}
-
-static void
-del_cidr(struct ip_set_hash *h, u8 cidr, u8 host_mask)
-{
-	u8 i;
-
-	--h->nets[cidr-1].nets;
-
-	pr_debug("del_cidr deleted %u: %u\n", cidr, h->nets[cidr-1].nets);
-
-	if (h->nets[cidr-1].nets != 0)
-		return;
-
-	/* All entries with this cidr size deleted, so cleanup h->cidr[] */
-	for (i = 0; i < host_mask - 1 && h->nets[i].cidr; i++) {
-		if (h->nets[i].cidr == cidr)
-			h->nets[i].cidr = cidr = h->nets[i+1].cidr;
-	}
-	h->nets[i - 1].cidr = 0;
-}
-#endif
-
-/* Destroy the hashtable part of the set */
-static void
-ahash_destroy(struct htable *t)
-{
-	struct hbucket *n;
-	u32 i;
-
-	for (i = 0; i < jhash_size(t->htable_bits); i++) {
-		n = hbucket(t, i);
-		if (n->size)
-			/* FIXME: use slab cache */
-			kfree(n->value);
-	}
-
-	ip_set_free(t);
-}
-
-/* Calculate the actual memory size of the set data */
-static size_t
-ahash_memsize(const struct ip_set_hash *h, size_t dsize, u8 host_mask)
-{
-	u32 i;
-	struct htable *t = h->table;
-	size_t memsize = sizeof(*h)
-			 + sizeof(*t)
-#ifdef IP_SET_HASH_WITH_NETS
-			 + sizeof(struct ip_set_hash_nets) * host_mask
-#endif
-			 + jhash_size(t->htable_bits) * sizeof(struct hbucket);
-
-	for (i = 0; i < jhash_size(t->htable_bits); i++)
-			memsize += t->bucket[i].size * dsize;
-
-	return memsize;
-}
-
-/* Flush a hash type of set: destroy all elements */
-static void
-ip_set_hash_flush(struct ip_set *set)
-{
-	struct ip_set_hash *h = set->data;
-	struct htable *t = h->table;
-	struct hbucket *n;
-	u32 i;
-
-	for (i = 0; i < jhash_size(t->htable_bits); i++) {
-		n = hbucket(t, i);
-		if (n->size) {
-			n->size = n->pos = 0;
-			/* FIXME: use slab cache */
-			kfree(n->value);
-		}
-	}
-#ifdef IP_SET_HASH_WITH_NETS
-	memset(h->nets, 0, sizeof(struct ip_set_hash_nets)
-			   * SET_HOST_MASK(set->family));
-#endif
-	h->elements = 0;
-}
-
-/* Destroy a hash type of set */
-static void
-ip_set_hash_destroy(struct ip_set *set)
-{
-	struct ip_set_hash *h = set->data;
-
-	if (with_timeout(h->timeout))
-		del_timer_sync(&h->gc);
-
-	ahash_destroy(h->table);
-#ifdef IP_SET_HASH_WITH_RBTREE
-	rbtree_destroy(&h->rbtree);
-#endif
-	kfree(h);
-
-	set->data = NULL;
-}
-
-#endif /* _IP_SET_AHASH_H */
-
-#ifndef HKEY_DATALEN
-#define HKEY_DATALEN	sizeof(struct type_pf_elem)
-#endif
-
-#define HKEY(data, initval, htable_bits)			\
-(jhash2((u32 *)(data), HKEY_DATALEN/sizeof(u32), initval)	\
-	& jhash_mask(htable_bits))
-
-#define CONCAT(a, b, c)		a##b##c
-#define TOKEN(a, b, c)		CONCAT(a, b, c)
-
-/* Type/family dependent function prototypes */
-
-#define type_pf_data_equal	TOKEN(TYPE, PF, _data_equal)
-#define type_pf_data_isnull	TOKEN(TYPE, PF, _data_isnull)
-#define type_pf_data_copy	TOKEN(TYPE, PF, _data_copy)
-#define type_pf_data_zero_out	TOKEN(TYPE, PF, _data_zero_out)
-#define type_pf_data_netmask	TOKEN(TYPE, PF, _data_netmask)
-#define type_pf_data_list	TOKEN(TYPE, PF, _data_list)
-#define type_pf_data_tlist	TOKEN(TYPE, PF, _data_tlist)
-#define type_pf_data_next	TOKEN(TYPE, PF, _data_next)
-#define type_pf_data_flags	TOKEN(TYPE, PF, _data_flags)
-#ifdef IP_SET_HASH_WITH_NETS
-#define type_pf_data_match	TOKEN(TYPE, PF, _data_match)
-#else
-#define type_pf_data_match(d)	1
-#endif
-
-#define type_pf_elem		TOKEN(TYPE, PF, _elem)
-#define type_pf_telem		TOKEN(TYPE, PF, _telem)
-#define type_pf_data_timeout	TOKEN(TYPE, PF, _data_timeout)
-#define type_pf_data_expired	TOKEN(TYPE, PF, _data_expired)
-#define type_pf_data_timeout_set TOKEN(TYPE, PF, _data_timeout_set)
-
-#define type_pf_elem_add	TOKEN(TYPE, PF, _elem_add)
-#define type_pf_add		TOKEN(TYPE, PF, _add)
-#define type_pf_del		TOKEN(TYPE, PF, _del)
-#define type_pf_test_cidrs	TOKEN(TYPE, PF, _test_cidrs)
-#define type_pf_test		TOKEN(TYPE, PF, _test)
-
-#define type_pf_elem_tadd	TOKEN(TYPE, PF, _elem_tadd)
-#define type_pf_del_telem	TOKEN(TYPE, PF, _ahash_del_telem)
-#define type_pf_expire		TOKEN(TYPE, PF, _expire)
-#define type_pf_tadd		TOKEN(TYPE, PF, _tadd)
-#define type_pf_tdel		TOKEN(TYPE, PF, _tdel)
-#define type_pf_ttest_cidrs	TOKEN(TYPE, PF, _ahash_ttest_cidrs)
-#define type_pf_ttest		TOKEN(TYPE, PF, _ahash_ttest)
-
-#define type_pf_resize		TOKEN(TYPE, PF, _resize)
-#define type_pf_tresize		TOKEN(TYPE, PF, _tresize)
-#define type_pf_flush		ip_set_hash_flush
-#define type_pf_destroy		ip_set_hash_destroy
-#define type_pf_head		TOKEN(TYPE, PF, _head)
-#define type_pf_list		TOKEN(TYPE, PF, _list)
-#define type_pf_tlist		TOKEN(TYPE, PF, _tlist)
-#define type_pf_same_set	TOKEN(TYPE, PF, _same_set)
-#define type_pf_kadt		TOKEN(TYPE, PF, _kadt)
-#define type_pf_uadt		TOKEN(TYPE, PF, _uadt)
-#define type_pf_gc		TOKEN(TYPE, PF, _gc)
-#define type_pf_gc_init		TOKEN(TYPE, PF, _gc_init)
-#define type_pf_variant		TOKEN(TYPE, PF, _variant)
-#define type_pf_tvariant	TOKEN(TYPE, PF, _tvariant)
-
-/* Flavour without timeout */
-
-/* Get the ith element from the array block n */
-#define ahash_data(n, i)	\
-	((struct type_pf_elem *)((n)->value) + (i))
-
-/* Add an element to the hash table when resizing the set:
- * we spare the maintenance of the internal counters. */
-static int
-type_pf_elem_add(struct hbucket *n, const struct type_pf_elem *value,
-		 u8 ahash_max, u32 cadt_flags)
-{
-	struct type_pf_elem *data;
-
-	if (n->pos >= n->size) {
-		void *tmp;
-
-		if (n->size >= ahash_max)
-			/* Trigger rehashing */
-			return -EAGAIN;
-
-		tmp = kzalloc((n->size + AHASH_INIT_SIZE)
-			      * sizeof(struct type_pf_elem),
-			      GFP_ATOMIC);
-		if (!tmp)
-			return -ENOMEM;
-		if (n->size) {
-			memcpy(tmp, n->value,
-			       sizeof(struct type_pf_elem) * n->size);
-			kfree(n->value);
-		}
-		n->value = tmp;
-		n->size += AHASH_INIT_SIZE;
-	}
-	data = ahash_data(n, n->pos++);
-	type_pf_data_copy(data, value);
-#ifdef IP_SET_HASH_WITH_NETS
-	/* Resizing won't overwrite stored flags */
-	if (cadt_flags)
-		type_pf_data_flags(data, cadt_flags);
-#endif
-	return 0;
-}
-
-/* Resize a hash: create a new hash table with doubling the hashsize
- * and inserting the elements to it. Repeat until we succeed or
- * fail due to memory pressures. */
-static int
-type_pf_resize(struct ip_set *set, bool retried)
-{
-	struct ip_set_hash *h = set->data;
-	struct htable *t, *orig = h->table;
-	u8 htable_bits = orig->htable_bits;
-	const struct type_pf_elem *data;
-	struct hbucket *n, *m;
-	u32 i, j;
-	int ret;
-
-retry:
-	ret = 0;
-	htable_bits++;
-	pr_debug("attempt to resize set %s from %u to %u, t %p\n",
-		 set->name, orig->htable_bits, htable_bits, orig);
-	if (!htable_bits) {
-		/* In case we have plenty of memory :-) */
-		pr_warning("Cannot increase the hashsize of set %s further\n",
-			   set->name);
-		return -IPSET_ERR_HASH_FULL;
-	}
-	t = ip_set_alloc(sizeof(*t)
-			 + jhash_size(htable_bits) * sizeof(struct hbucket));
-	if (!t)
-		return -ENOMEM;
-	t->htable_bits = htable_bits;
-
-	read_lock_bh(&set->lock);
-	for (i = 0; i < jhash_size(orig->htable_bits); i++) {
-		n = hbucket(orig, i);
-		for (j = 0; j < n->pos; j++) {
-			data = ahash_data(n, j);
-			m = hbucket(t, HKEY(data, h->initval, htable_bits));
-			ret = type_pf_elem_add(m, data, AHASH_MAX(h), 0);
-			if (ret < 0) {
-				read_unlock_bh(&set->lock);
-				ahash_destroy(t);
-				if (ret == -EAGAIN)
-					goto retry;
-				return ret;
-			}
-		}
-	}
-
-	rcu_assign_pointer(h->table, t);
-	read_unlock_bh(&set->lock);
-
-	/* Give time to other readers of the set */
-	synchronize_rcu_bh();
-
-	pr_debug("set %s resized from %u (%p) to %u (%p)\n", set->name,
-		 orig->htable_bits, orig, t->htable_bits, t);
-	ahash_destroy(orig);
-
-	return 0;
-}
-
-static inline void
-type_pf_data_next(struct ip_set_hash *h, const struct type_pf_elem *d);
-
-/* Add an element to a hash and update the internal counters when succeeded,
- * otherwise report the proper error code. */
-static int
-type_pf_add(struct ip_set *set, void *value, u32 timeout, u32 flags)
-{
-	struct ip_set_hash *h = set->data;
-	struct htable *t;
-	const struct type_pf_elem *d = value;
-	struct hbucket *n;
-	int i, ret = 0;
-	u32 key, multi = 0;
-	u32 cadt_flags = flags >> 16;
-
-	if (h->elements >= h->maxelem) {
-		if (net_ratelimit())
-			pr_warning("Set %s is full, maxelem %u reached\n",
-				   set->name, h->maxelem);
-		return -IPSET_ERR_HASH_FULL;
-	}
-
-	rcu_read_lock_bh();
-	t = rcu_dereference_bh(h->table);
-	key = HKEY(value, h->initval, t->htable_bits);
-	n = hbucket(t, key);
-	for (i = 0; i < n->pos; i++)
-		if (type_pf_data_equal(ahash_data(n, i), d, &multi)) {
-#ifdef IP_SET_HASH_WITH_NETS
-			if (flags & IPSET_FLAG_EXIST)
-				/* Support overwriting just the flags */
-				type_pf_data_flags(ahash_data(n, i),
-						   cadt_flags);
-#endif
-			ret = -IPSET_ERR_EXIST;
-			goto out;
-		}
-	TUNE_AHASH_MAX(h, multi);
-	ret = type_pf_elem_add(n, value, AHASH_MAX(h), cadt_flags);
-	if (ret != 0) {
-		if (ret == -EAGAIN)
-			type_pf_data_next(h, d);
-		goto out;
-	}
-
-#ifdef IP_SET_HASH_WITH_NETS
-	add_cidr(h, CIDR(d->cidr), HOST_MASK);
-#endif
-	h->elements++;
-out:
-	rcu_read_unlock_bh();
-	return ret;
-}
-
-/* Delete an element from the hash: swap it with the last element
- * and free up space if possible.
- */
-static int
-type_pf_del(struct ip_set *set, void *value, u32 timeout, u32 flags)
-{
-	struct ip_set_hash *h = set->data;
-	struct htable *t = h->table;
-	const struct type_pf_elem *d = value;
-	struct hbucket *n;
-	int i;
-	struct type_pf_elem *data;
-	u32 key, multi = 0;
-
-	key = HKEY(value, h->initval, t->htable_bits);
-	n = hbucket(t, key);
-	for (i = 0; i < n->pos; i++) {
-		data = ahash_data(n, i);
-		if (!type_pf_data_equal(data, d, &multi))
-			continue;
-		if (i != n->pos - 1)
-			/* Not last one */
-			type_pf_data_copy(data, ahash_data(n, n->pos - 1));
-
-		n->pos--;
-		h->elements--;
-#ifdef IP_SET_HASH_WITH_NETS
-		del_cidr(h, CIDR(d->cidr), HOST_MASK);
-#endif
-		if (n->pos + AHASH_INIT_SIZE < n->size) {
-			void *tmp = kzalloc((n->size - AHASH_INIT_SIZE)
-					    * sizeof(struct type_pf_elem),
-					    GFP_ATOMIC);
-			if (!tmp)
-				return 0;
-			n->size -= AHASH_INIT_SIZE;
-			memcpy(tmp, n->value,
-			       n->size * sizeof(struct type_pf_elem));
-			kfree(n->value);
-			n->value = tmp;
-		}
-		return 0;
-	}
-
-	return -IPSET_ERR_EXIST;
-}
-
-#ifdef IP_SET_HASH_WITH_NETS
-
-/* Special test function which takes into account the different network
- * sizes added to the set */
-static int
-type_pf_test_cidrs(struct ip_set *set, struct type_pf_elem *d, u32 timeout)
-{
-	struct ip_set_hash *h = set->data;
-	struct htable *t = h->table;
-	struct hbucket *n;
-	const struct type_pf_elem *data;
-	int i, j = 0;
-	u32 key, multi = 0;
-	u8 host_mask = SET_HOST_MASK(set->family);
-
-	pr_debug("test by nets\n");
-	for (; j < host_mask && h->nets[j].cidr && !multi; j++) {
-		type_pf_data_netmask(d, h->nets[j].cidr);
-		key = HKEY(d, h->initval, t->htable_bits);
-		n = hbucket(t, key);
-		for (i = 0; i < n->pos; i++) {
-			data = ahash_data(n, i);
-			if (type_pf_data_equal(data, d, &multi))
-				return type_pf_data_match(data);
-		}
-	}
-	return 0;
-}
-#endif
-
-/* Test whether the element is added to the set */
-static int
-type_pf_test(struct ip_set *set, void *value, u32 timeout, u32 flags)
-{
-	struct ip_set_hash *h = set->data;
-	struct htable *t = h->table;
-	struct type_pf_elem *d = value;
-	struct hbucket *n;
-	const struct type_pf_elem *data;
-	int i;
-	u32 key, multi = 0;
-
-#ifdef IP_SET_HASH_WITH_NETS
-	/* If we test an IP address and not a network address,
-	 * try all possible network sizes */
-	if (CIDR(d->cidr) == SET_HOST_MASK(set->family))
-		return type_pf_test_cidrs(set, d, timeout);
-#endif
-
-	key = HKEY(d, h->initval, t->htable_bits);
-	n = hbucket(t, key);
-	for (i = 0; i < n->pos; i++) {
-		data = ahash_data(n, i);
-		if (type_pf_data_equal(data, d, &multi))
-			return type_pf_data_match(data);
-	}
-	return 0;
-}
-
-/* Reply a HEADER request: fill out the header part of the set */
-static int
-type_pf_head(struct ip_set *set, struct sk_buff *skb)
-{
-	const struct ip_set_hash *h = set->data;
-	struct nlattr *nested;
-	size_t memsize;
-
-	read_lock_bh(&set->lock);
-	memsize = ahash_memsize(h, with_timeout(h->timeout)
-					? sizeof(struct type_pf_telem)
-					: sizeof(struct type_pf_elem),
-				set->family == AF_INET ? 32 : 128);
-	read_unlock_bh(&set->lock);
-
-	nested = ipset_nest_start(skb, IPSET_ATTR_DATA);
-	if (!nested)
-		goto nla_put_failure;
-	NLA_PUT_NET32(skb, IPSET_ATTR_HASHSIZE,
-		      htonl(jhash_size(h->table->htable_bits)));
-	NLA_PUT_NET32(skb, IPSET_ATTR_MAXELEM, htonl(h->maxelem));
-#ifdef IP_SET_HASH_WITH_NETMASK
-	if (h->netmask != HOST_MASK)
-		NLA_PUT_U8(skb, IPSET_ATTR_NETMASK, h->netmask);
-#endif
-	NLA_PUT_NET32(skb, IPSET_ATTR_REFERENCES, htonl(set->ref - 1));
-	NLA_PUT_NET32(skb, IPSET_ATTR_MEMSIZE, htonl(memsize));
-	if (with_timeout(h->timeout))
-		NLA_PUT_NET32(skb, IPSET_ATTR_TIMEOUT, htonl(h->timeout));
-	ipset_nest_end(skb, nested);
-
-	return 0;
-nla_put_failure:
-	return -EMSGSIZE;
-}
-
-/* Reply a LIST/SAVE request: dump the elements of the specified set */
-static int
-type_pf_list(const struct ip_set *set,
-	     struct sk_buff *skb, struct netlink_callback *cb)
-{
-	const struct ip_set_hash *h = set->data;
-	const struct htable *t = h->table;
-	struct nlattr *atd, *nested;
-	const struct hbucket *n;
-	const struct type_pf_elem *data;
-	u32 first = cb->args[2];
-	/* We assume that one hash bucket fills into one page */
-	void *incomplete;
-	int i;
-
-	atd = ipset_nest_start(skb, IPSET_ATTR_ADT);
-	if (!atd)
-		return -EMSGSIZE;
-	pr_debug("list hash set %s\n", set->name);
-	for (; cb->args[2] < jhash_size(t->htable_bits); cb->args[2]++) {
-		incomplete = skb_tail_pointer(skb);
-		n = hbucket(t, cb->args[2]);
-		pr_debug("cb->args[2]: %lu, t %p n %p\n", cb->args[2], t, n);
-		for (i = 0; i < n->pos; i++) {
-			data = ahash_data(n, i);
-			pr_debug("list hash %lu hbucket %p i %u, data %p\n",
-				 cb->args[2], n, i, data);
-			nested = ipset_nest_start(skb, IPSET_ATTR_DATA);
-			if (!nested) {
-				if (cb->args[2] == first) {
-					nla_nest_cancel(skb, atd);
-					return -EMSGSIZE;
-				} else
-					goto nla_put_failure;
-			}
-			if (type_pf_data_list(skb, data))
-				goto nla_put_failure;
-			ipset_nest_end(skb, nested);
-		}
-	}
-	ipset_nest_end(skb, atd);
-	/* Set listing finished */
-	cb->args[2] = 0;
-
-	return 0;
-
-nla_put_failure:
-	nlmsg_trim(skb, incomplete);
-	ipset_nest_end(skb, atd);
-	if (unlikely(first == cb->args[2])) {
-		pr_warning("Can't list set %s: one bucket does not fit into "
-			   "a message. Please report it!\n", set->name);
-		cb->args[2] = 0;
-		return -EMSGSIZE;
-	}
-	return 0;
-}
-
-static int
-type_pf_kadt(struct ip_set *set, const struct sk_buff * skb,
-	     const struct xt_action_param *par,
-	     enum ipset_adt adt, const struct ip_set_adt_opt *opt);
-static int
-type_pf_uadt(struct ip_set *set, struct nlattr *tb[],
-	     enum ipset_adt adt, u32 *lineno, u32 flags, bool retried);
-
-static const struct ip_set_type_variant type_pf_variant = {
-	.kadt	= type_pf_kadt,
-	.uadt	= type_pf_uadt,
-	.adt	= {
-		[IPSET_ADD] = type_pf_add,
-		[IPSET_DEL] = type_pf_del,
-		[IPSET_TEST] = type_pf_test,
-	},
-	.destroy = type_pf_destroy,
-	.flush	= type_pf_flush,
-	.head	= type_pf_head,
-	.list	= type_pf_list,
-	.resize	= type_pf_resize,
-	.same_set = type_pf_same_set,
-};
-
-/* Flavour with timeout support */
-
-#define ahash_tdata(n, i) \
-	(struct type_pf_elem *)((struct type_pf_telem *)((n)->value) + (i))
-
-static inline u32
-type_pf_data_timeout(const struct type_pf_elem *data)
-{
-	const struct type_pf_telem *tdata =
-		(const struct type_pf_telem *) data;
-
-	return tdata->timeout;
-}
-
-static inline bool
-type_pf_data_expired(const struct type_pf_elem *data)
-{
-	const struct type_pf_telem *tdata =
-		(const struct type_pf_telem *) data;
-
-	return ip_set_timeout_expired(tdata->timeout);
-}
-
-static inline void
-type_pf_data_timeout_set(struct type_pf_elem *data, u32 timeout)
-{
-	struct type_pf_telem *tdata = (struct type_pf_telem *) data;
-
-	tdata->timeout = ip_set_timeout_set(timeout);
-}
-
-static int
-type_pf_elem_tadd(struct hbucket *n, const struct type_pf_elem *value,
-		  u8 ahash_max, u32 cadt_flags, u32 timeout)
-{
-	struct type_pf_elem *data;
-
-	if (n->pos >= n->size) {
-		void *tmp;
-
-		if (n->size >= ahash_max)
-			/* Trigger rehashing */
-			return -EAGAIN;
-
-		tmp = kzalloc((n->size + AHASH_INIT_SIZE)
-			      * sizeof(struct type_pf_telem),
-			      GFP_ATOMIC);
-		if (!tmp)
-			return -ENOMEM;
-		if (n->size) {
-			memcpy(tmp, n->value,
-			       sizeof(struct type_pf_telem) * n->size);
-			kfree(n->value);
-		}
-		n->value = tmp;
-		n->size += AHASH_INIT_SIZE;
-	}
-	data = ahash_tdata(n, n->pos++);
-	type_pf_data_copy(data, value);
-	type_pf_data_timeout_set(data, timeout);
-#ifdef IP_SET_HASH_WITH_NETS
-	/* Resizing won't overwrite stored flags */
-	if (cadt_flags)
-		type_pf_data_flags(data, cadt_flags);
-#endif
-	return 0;
-}
-
-/* Delete expired elements from the hashtable */
-static void
-type_pf_expire(struct ip_set_hash *h)
-{
-	struct htable *t = h->table;
-	struct hbucket *n;
-	struct type_pf_elem *data;
-	u32 i;
-	int j;
-
-	for (i = 0; i < jhash_size(t->htable_bits); i++) {
-		n = hbucket(t, i);
-		for (j = 0; j < n->pos; j++) {
-			data = ahash_tdata(n, j);
-			if (type_pf_data_expired(data)) {
-				pr_debug("expired %u/%u\n", i, j);
-#ifdef IP_SET_HASH_WITH_NETS
-				del_cidr(h, CIDR(data->cidr), HOST_MASK);
-#endif
-				if (j != n->pos - 1)
-					/* Not last one */
-					type_pf_data_copy(data,
-						ahash_tdata(n, n->pos - 1));
-				n->pos--;
-				h->elements--;
-			}
-		}
-		if (n->pos + AHASH_INIT_SIZE < n->size) {
-			void *tmp = kzalloc((n->size - AHASH_INIT_SIZE)
-					    * sizeof(struct type_pf_telem),
-					    GFP_ATOMIC);
-			if (!tmp)
-				/* Still try to delete expired elements */
-				continue;
-			n->size -= AHASH_INIT_SIZE;
-			memcpy(tmp, n->value,
-			       n->size * sizeof(struct type_pf_telem));
-			kfree(n->value);
-			n->value = tmp;
-		}
-	}
-}
-
-static int
-type_pf_tresize(struct ip_set *set, bool retried)
-{
-	struct ip_set_hash *h = set->data;
-	struct htable *t, *orig = h->table;
-	u8 htable_bits = orig->htable_bits;
-	const struct type_pf_elem *data;
-	struct hbucket *n, *m;
-	u32 i, j;
-	int ret;
-
-	/* Try to cleanup once */
-	if (!retried) {
-		i = h->elements;
-		write_lock_bh(&set->lock);
-		type_pf_expire(set->data);
-		write_unlock_bh(&set->lock);
-		if (h->elements <  i)
-			return 0;
-	}
-
-retry:
-	ret = 0;
-	htable_bits++;
-	if (!htable_bits) {
-		/* In case we have plenty of memory :-) */
-		pr_warning("Cannot increase the hashsize of set %s further\n",
-			   set->name);
-		return -IPSET_ERR_HASH_FULL;
-	}
-	t = ip_set_alloc(sizeof(*t)
-			 + jhash_size(htable_bits) * sizeof(struct hbucket));
-	if (!t)
-		return -ENOMEM;
-	t->htable_bits = htable_bits;
-
-	read_lock_bh(&set->lock);
-	for (i = 0; i < jhash_size(orig->htable_bits); i++) {
-		n = hbucket(orig, i);
-		for (j = 0; j < n->pos; j++) {
-			data = ahash_tdata(n, j);
-			m = hbucket(t, HKEY(data, h->initval, htable_bits));
-			ret = type_pf_elem_tadd(m, data, AHASH_MAX(h), 0,
-						type_pf_data_timeout(data));
-			if (ret < 0) {
-				read_unlock_bh(&set->lock);
-				ahash_destroy(t);
-				if (ret == -EAGAIN)
-					goto retry;
-				return ret;
-			}
-		}
-	}
-
-	rcu_assign_pointer(h->table, t);
-	read_unlock_bh(&set->lock);
-
-	/* Give time to other readers of the set */
-	synchronize_rcu_bh();
-
-	ahash_destroy(orig);
-
-	return 0;
-}
-
-static int
-type_pf_tadd(struct ip_set *set, void *value, u32 timeout, u32 flags)
-{
-	struct ip_set_hash *h = set->data;
-	struct htable *t = h->table;
-	const struct type_pf_elem *d = value;
-	struct hbucket *n;
-	struct type_pf_elem *data;
-	int ret = 0, i, j = AHASH_MAX(h) + 1;
-	bool flag_exist = flags & IPSET_FLAG_EXIST;
-	u32 key, multi = 0;
-	u32 cadt_flags = flags >> 16;
-
-	if (h->elements >= h->maxelem)
-		/* FIXME: when set is full, we slow down here */
-		type_pf_expire(h);
-	if (h->elements >= h->maxelem) {
-		if (net_ratelimit())
-			pr_warning("Set %s is full, maxelem %u reached\n",
-				   set->name, h->maxelem);
-		return -IPSET_ERR_HASH_FULL;
-	}
-
-	rcu_read_lock_bh();
-	t = rcu_dereference_bh(h->table);
-	key = HKEY(d, h->initval, t->htable_bits);
-	n = hbucket(t, key);
-	for (i = 0; i < n->pos; i++) {
-		data = ahash_tdata(n, i);
-		if (type_pf_data_equal(data, d, &multi)) {
-			if (type_pf_data_expired(data) || flag_exist)
-				/* Just timeout value may be updated */
-				j = i;
-			else {
-				ret = -IPSET_ERR_EXIST;
-				goto out;
-			}
-		} else if (j == AHASH_MAX(h) + 1 &&
-			   type_pf_data_expired(data))
-			j = i;
-	}
-	if (j != AHASH_MAX(h) + 1) {
-		data = ahash_tdata(n, j);
-#ifdef IP_SET_HASH_WITH_NETS
-		del_cidr(h, CIDR(data->cidr), HOST_MASK);
-		add_cidr(h, CIDR(d->cidr), HOST_MASK);
-#endif
-		type_pf_data_copy(data, d);
-		type_pf_data_timeout_set(data, timeout);
-#ifdef IP_SET_HASH_WITH_NETS
-		type_pf_data_flags(data, cadt_flags);
-#endif
-		goto out;
-	}
-	TUNE_AHASH_MAX(h, multi);
-	ret = type_pf_elem_tadd(n, d, AHASH_MAX(h), cadt_flags, timeout);
-	if (ret != 0) {
-		if (ret == -EAGAIN)
-			type_pf_data_next(h, d);
-		goto out;
-	}
-
-#ifdef IP_SET_HASH_WITH_NETS
-	add_cidr(h, CIDR(d->cidr), HOST_MASK);
-#endif
-	h->elements++;
-out:
-	rcu_read_unlock_bh();
-	return ret;
-}
-
-static int
-type_pf_tdel(struct ip_set *set, void *value, u32 timeout, u32 flags)
-{
-	struct ip_set_hash *h = set->data;
-	struct htable *t = h->table;
-	const struct type_pf_elem *d = value;
-	struct hbucket *n;
-	int i;
-	struct type_pf_elem *data;
-	u32 key, multi = 0;
-
-	key = HKEY(value, h->initval, t->htable_bits);
-	n = hbucket(t, key);
-	for (i = 0; i < n->pos; i++) {
-		data = ahash_tdata(n, i);
-		if (!type_pf_data_equal(data, d, &multi))
-			continue;
-		if (type_pf_data_expired(data))
-			return -IPSET_ERR_EXIST;
-		if (i != n->pos - 1)
-			/* Not last one */
-			type_pf_data_copy(data, ahash_tdata(n, n->pos - 1));
-
-		n->pos--;
-		h->elements--;
-#ifdef IP_SET_HASH_WITH_NETS
-		del_cidr(h, CIDR(d->cidr), HOST_MASK);
-#endif
-		if (n->pos + AHASH_INIT_SIZE < n->size) {
-			void *tmp = kzalloc((n->size - AHASH_INIT_SIZE)
-					    * sizeof(struct type_pf_telem),
-					    GFP_ATOMIC);
-			if (!tmp)
-				return 0;
-			n->size -= AHASH_INIT_SIZE;
-			memcpy(tmp, n->value,
-			       n->size * sizeof(struct type_pf_telem));
-			kfree(n->value);
-			n->value = tmp;
-		}
-		return 0;
-	}
-
-	return -IPSET_ERR_EXIST;
-}
-
-#ifdef IP_SET_HASH_WITH_NETS
-static int
-type_pf_ttest_cidrs(struct ip_set *set, struct type_pf_elem *d, u32 timeout)
-{
-	struct ip_set_hash *h = set->data;
-	struct htable *t = h->table;
-	struct type_pf_elem *data;
-	struct hbucket *n;
-	int i, j = 0;
-	u32 key, multi = 0;
-	u8 host_mask = SET_HOST_MASK(set->family);
-
-	for (; j < host_mask && h->nets[j].cidr && !multi; j++) {
-		type_pf_data_netmask(d, h->nets[j].cidr);
-		key = HKEY(d, h->initval, t->htable_bits);
-		n = hbucket(t, key);
-		for (i = 0; i < n->pos; i++) {
-			data = ahash_tdata(n, i);
-#ifdef IP_SET_HASH_WITH_MULTI
-			if (type_pf_data_equal(data, d, &multi)) {
-				if (!type_pf_data_expired(data))
-					return type_pf_data_match(data);
-				multi = 0;
-			}
-#else
-			if (type_pf_data_equal(data, d, &multi) &&
-			    !type_pf_data_expired(data))
-				return type_pf_data_match(data);
-#endif
-		}
-	}
-	return 0;
-}
-#endif
-
-static int
-type_pf_ttest(struct ip_set *set, void *value, u32 timeout, u32 flags)
-{
-	struct ip_set_hash *h = set->data;
-	struct htable *t = h->table;
-	struct type_pf_elem *data, *d = value;
-	struct hbucket *n;
-	int i;
-	u32 key, multi = 0;
-
-#ifdef IP_SET_HASH_WITH_NETS
-	if (CIDR(d->cidr) == SET_HOST_MASK(set->family))
-		return type_pf_ttest_cidrs(set, d, timeout);
-#endif
-	key = HKEY(d, h->initval, t->htable_bits);
-	n = hbucket(t, key);
-	for (i = 0; i < n->pos; i++) {
-		data = ahash_tdata(n, i);
-		if (type_pf_data_equal(data, d, &multi) &&
-		    !type_pf_data_expired(data))
-			return type_pf_data_match(data);
-	}
-	return 0;
-}
-
-static int
-type_pf_tlist(const struct ip_set *set,
-	      struct sk_buff *skb, struct netlink_callback *cb)
-{
-	const struct ip_set_hash *h = set->data;
-	const struct htable *t = h->table;
-	struct nlattr *atd, *nested;
-	const struct hbucket *n;
-	const struct type_pf_elem *data;
-	u32 first = cb->args[2];
-	/* We assume that one hash bucket fills into one page */
-	void *incomplete;
-	int i;
-
-	atd = ipset_nest_start(skb, IPSET_ATTR_ADT);
-	if (!atd)
-		return -EMSGSIZE;
-	for (; cb->args[2] < jhash_size(t->htable_bits); cb->args[2]++) {
-		incomplete = skb_tail_pointer(skb);
-		n = hbucket(t, cb->args[2]);
-		for (i = 0; i < n->pos; i++) {
-			data = ahash_tdata(n, i);
-			pr_debug("list %p %u\n", n, i);
-			if (type_pf_data_expired(data))
-				continue;
-			pr_debug("do list %p %u\n", n, i);
-			nested = ipset_nest_start(skb, IPSET_ATTR_DATA);
-			if (!nested) {
-				if (cb->args[2] == first) {
-					nla_nest_cancel(skb, atd);
-					return -EMSGSIZE;
-				} else
-					goto nla_put_failure;
-			}
-			if (type_pf_data_tlist(skb, data))
-				goto nla_put_failure;
-			ipset_nest_end(skb, nested);
-		}
-	}
-	ipset_nest_end(skb, atd);
-	/* Set listing finished */
-	cb->args[2] = 0;
-
-	return 0;
-
-nla_put_failure:
-	nlmsg_trim(skb, incomplete);
-	ipset_nest_end(skb, atd);
-	if (unlikely(first == cb->args[2])) {
-		pr_warning("Can't list set %s: one bucket does not fit into "
-			   "a message. Please report it!\n", set->name);
-		cb->args[2] = 0;
-		return -EMSGSIZE;
-	}
-	return 0;
-}
-
-static const struct ip_set_type_variant type_pf_tvariant = {
-	.kadt	= type_pf_kadt,
-	.uadt	= type_pf_uadt,
-	.adt	= {
-		[IPSET_ADD] = type_pf_tadd,
-		[IPSET_DEL] = type_pf_tdel,
-		[IPSET_TEST] = type_pf_ttest,
-	},
-	.destroy = type_pf_destroy,
-	.flush	= type_pf_flush,
-	.head	= type_pf_head,
-	.list	= type_pf_tlist,
-	.resize	= type_pf_tresize,
-	.same_set = type_pf_same_set,
-};
-
-static void
-type_pf_gc(unsigned long ul_set)
-{
-	struct ip_set *set = (struct ip_set *) ul_set;
-	struct ip_set_hash *h = set->data;
-
-	pr_debug("called\n");
-	write_lock_bh(&set->lock);
-	type_pf_expire(h);
-	write_unlock_bh(&set->lock);
-
-	h->gc.expires = jiffies + IPSET_GC_PERIOD(h->timeout) * HZ;
-	add_timer(&h->gc);
-}
-
-static void
-type_pf_gc_init(struct ip_set *set)
-{
-	struct ip_set_hash *h = set->data;
-
-	init_timer(&h->gc);
-	h->gc.data = (unsigned long) set;
-	h->gc.function = type_pf_gc;
-	h->gc.expires = jiffies + IPSET_GC_PERIOD(h->timeout) * HZ;
-	add_timer(&h->gc);
-	pr_debug("gc initialized, run in every %u\n",
-		 IPSET_GC_PERIOD(h->timeout));
-}
-
-#undef HKEY_DATALEN
-#undef HKEY
-#undef type_pf_data_equal
-#undef type_pf_data_isnull
-#undef type_pf_data_copy
-#undef type_pf_data_zero_out
-#undef type_pf_data_netmask
-#undef type_pf_data_list
-#undef type_pf_data_tlist
-#undef type_pf_data_next
-#undef type_pf_data_flags
-#undef type_pf_data_match
-
-#undef type_pf_elem
-#undef type_pf_telem
-#undef type_pf_data_timeout
-#undef type_pf_data_expired
-#undef type_pf_data_timeout_set
-
-#undef type_pf_elem_add
-#undef type_pf_add
-#undef type_pf_del
-#undef type_pf_test_cidrs
-#undef type_pf_test
-
-#undef type_pf_elem_tadd
-#undef type_pf_del_telem
-#undef type_pf_expire
-#undef type_pf_tadd
-#undef type_pf_tdel
-#undef type_pf_ttest_cidrs
-#undef type_pf_ttest
-
-#undef type_pf_resize
-#undef type_pf_tresize
-#undef type_pf_flush
-#undef type_pf_destroy
-#undef type_pf_head
-#undef type_pf_list
-#undef type_pf_tlist
-#undef type_pf_same_set
-#undef type_pf_kadt
-#undef type_pf_uadt
-#undef type_pf_gc
-#undef type_pf_gc_init
-#undef type_pf_variant
-#undef type_pf_tvariant
diff --git a/ANDROID_3.4.5/include/linux/netfilter/ipset/ip_set_bitmap.h b/ANDROID_3.4.5/include/linux/netfilter/ipset/ip_set_bitmap.h
deleted file mode 100644
index 61a9e874..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter/ipset/ip_set_bitmap.h
+++ /dev/null
@@ -1,31 +0,0 @@
-#ifndef __IP_SET_BITMAP_H
-#define __IP_SET_BITMAP_H
-
-/* Bitmap type specific error codes */
-enum {
-	/* The element is out of the range of the set */
-	IPSET_ERR_BITMAP_RANGE = IPSET_ERR_TYPE_SPECIFIC,
-	/* The range exceeds the size limit of the set type */
-	IPSET_ERR_BITMAP_RANGE_SIZE,
-};
-
-#ifdef __KERNEL__
-#define IPSET_BITMAP_MAX_RANGE	0x0000FFFF
-
-/* Common functions */
-
-static inline u32
-range_to_mask(u32 from, u32 to, u8 *bits)
-{
-	u32 mask = 0xFFFFFFFE;
-
-	*bits = 32;
-	while (--(*bits) > 0 && mask && (to & mask) != from)
-		mask <<= 1;
-
-	return mask;
-}
-
-#endif /* __KERNEL__ */
-
-#endif /* __IP_SET_BITMAP_H */
diff --git a/ANDROID_3.4.5/include/linux/netfilter/ipset/ip_set_getport.h b/ANDROID_3.4.5/include/linux/netfilter/ipset/ip_set_getport.h
deleted file mode 100644
index 90d09300..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter/ipset/ip_set_getport.h
+++ /dev/null
@@ -1,33 +0,0 @@
-#ifndef _IP_SET_GETPORT_H
-#define _IP_SET_GETPORT_H
-
-extern bool ip_set_get_ip4_port(const struct sk_buff *skb, bool src,
-				__be16 *port, u8 *proto);
-
-#if defined(CONFIG_IP6_NF_IPTABLES) || defined(CONFIG_IP6_NF_IPTABLES_MODULE)
-extern bool ip_set_get_ip6_port(const struct sk_buff *skb, bool src,
-				__be16 *port, u8 *proto);
-#else
-static inline bool ip_set_get_ip6_port(const struct sk_buff *skb, bool src,
-				       __be16 *port, u8 *proto)
-{
-	return false;
-}
-#endif
-
-extern bool ip_set_get_ip_port(const struct sk_buff *skb, u8 pf, bool src,
-				__be16 *port);
-
-static inline bool ip_set_proto_with_ports(u8 proto)
-{
-	switch (proto) {
-	case IPPROTO_TCP:
-	case IPPROTO_SCTP:
-	case IPPROTO_UDP:
-	case IPPROTO_UDPLITE:
-		return true;
-	}
-	return false;
-}
-
-#endif /*_IP_SET_GETPORT_H*/
diff --git a/ANDROID_3.4.5/include/linux/netfilter/ipset/ip_set_hash.h b/ANDROID_3.4.5/include/linux/netfilter/ipset/ip_set_hash.h
deleted file mode 100644
index e2a9fae7..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter/ipset/ip_set_hash.h
+++ /dev/null
@@ -1,30 +0,0 @@
-#ifndef __IP_SET_HASH_H
-#define __IP_SET_HASH_H
-
-/* Hash type specific error codes */
-enum {
-	/* Hash is full */
-	IPSET_ERR_HASH_FULL = IPSET_ERR_TYPE_SPECIFIC,
-	/* Null-valued element */
-	IPSET_ERR_HASH_ELEM,
-	/* Invalid protocol */
-	IPSET_ERR_INVALID_PROTO,
-	/* Protocol missing but must be specified */
-	IPSET_ERR_MISSING_PROTO,
-	/* Range not supported */
-	IPSET_ERR_HASH_RANGE_UNSUPPORTED,
-	/* Invalid range */
-	IPSET_ERR_HASH_RANGE,
-};
-
-#ifdef __KERNEL__
-
-#define IPSET_DEFAULT_HASHSIZE		1024
-#define IPSET_MIMINAL_HASHSIZE		64
-#define IPSET_DEFAULT_MAXELEM		65536
-#define IPSET_DEFAULT_PROBES		4
-#define IPSET_DEFAULT_RESIZE		100
-
-#endif /* __KERNEL__ */
-
-#endif /* __IP_SET_HASH_H */
diff --git a/ANDROID_3.4.5/include/linux/netfilter/ipset/ip_set_list.h b/ANDROID_3.4.5/include/linux/netfilter/ipset/ip_set_list.h
deleted file mode 100644
index 40a63f30..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter/ipset/ip_set_list.h
+++ /dev/null
@@ -1,27 +0,0 @@
-#ifndef __IP_SET_LIST_H
-#define __IP_SET_LIST_H
-
-/* List type specific error codes */
-enum {
-	/* Set name to be added/deleted/tested does not exist. */
-	IPSET_ERR_NAME = IPSET_ERR_TYPE_SPECIFIC,
-	/* list:set type is not permitted to add */
-	IPSET_ERR_LOOP,
-	/* Missing reference set */
-	IPSET_ERR_BEFORE,
-	/* Reference set does not exist */
-	IPSET_ERR_NAMEREF,
-	/* Set is full */
-	IPSET_ERR_LIST_FULL,
-	/* Reference set is not added to the set */
-	IPSET_ERR_REF_EXIST,
-};
-
-#ifdef __KERNEL__
-
-#define IP_SET_LIST_DEFAULT_SIZE	8
-#define IP_SET_LIST_MIN_SIZE		4
-
-#endif /* __KERNEL__ */
-
-#endif /* __IP_SET_LIST_H */
diff --git a/ANDROID_3.4.5/include/linux/netfilter/ipset/ip_set_timeout.h b/ANDROID_3.4.5/include/linux/netfilter/ipset/ip_set_timeout.h
deleted file mode 100644
index 47923205..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter/ipset/ip_set_timeout.h
+++ /dev/null
@@ -1,132 +0,0 @@
-#ifndef _IP_SET_TIMEOUT_H
-#define _IP_SET_TIMEOUT_H
-
-/* Copyright (C) 2003-2011 Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifdef __KERNEL__
-
-/* How often should the gc be run by default */
-#define IPSET_GC_TIME			(3 * 60)
-
-/* Timeout period depending on the timeout value of the given set */
-#define IPSET_GC_PERIOD(timeout) \
-	((timeout/3) ? min_t(u32, (timeout)/3, IPSET_GC_TIME) : 1)
-
-/* Set is defined without timeout support: timeout value may be 0 */
-#define IPSET_NO_TIMEOUT	UINT_MAX
-
-#define with_timeout(timeout)	((timeout) != IPSET_NO_TIMEOUT)
-
-#define opt_timeout(opt, map)	\
-	(with_timeout((opt)->timeout) ? (opt)->timeout : (map)->timeout)
-
-static inline unsigned int
-ip_set_timeout_uget(struct nlattr *tb)
-{
-	unsigned int timeout = ip_set_get_h32(tb);
-
-	/* Userspace supplied TIMEOUT parameter: adjust crazy size */
-	return timeout == IPSET_NO_TIMEOUT ? IPSET_NO_TIMEOUT - 1 : timeout;
-}
-
-#ifdef IP_SET_BITMAP_TIMEOUT
-
-/* Bitmap specific timeout constants and macros for the entries */
-
-/* Bitmap entry is unset */
-#define IPSET_ELEM_UNSET	0
-/* Bitmap entry is set with no timeout value */
-#define IPSET_ELEM_PERMANENT	(UINT_MAX/2)
-
-static inline bool
-ip_set_timeout_test(unsigned long timeout)
-{
-	return timeout != IPSET_ELEM_UNSET &&
-	       (timeout == IPSET_ELEM_PERMANENT ||
-		time_is_after_jiffies(timeout));
-}
-
-static inline bool
-ip_set_timeout_expired(unsigned long timeout)
-{
-	return timeout != IPSET_ELEM_UNSET &&
-	       timeout != IPSET_ELEM_PERMANENT &&
-	       time_is_before_jiffies(timeout);
-}
-
-static inline unsigned long
-ip_set_timeout_set(u32 timeout)
-{
-	unsigned long t;
-
-	if (!timeout)
-		return IPSET_ELEM_PERMANENT;
-
-	t = msecs_to_jiffies(timeout * 1000) + jiffies;
-	if (t == IPSET_ELEM_UNSET || t == IPSET_ELEM_PERMANENT)
-		/* Bingo! */
-		t++;
-
-	return t;
-}
-
-static inline u32
-ip_set_timeout_get(unsigned long timeout)
-{
-	return timeout == IPSET_ELEM_PERMANENT ? 0 :
-		jiffies_to_msecs(timeout - jiffies)/1000;
-}
-
-#else
-
-/* Hash specific timeout constants and macros for the entries */
-
-/* Hash entry is set with no timeout value */
-#define IPSET_ELEM_PERMANENT	0
-
-static inline bool
-ip_set_timeout_test(unsigned long timeout)
-{
-	return timeout == IPSET_ELEM_PERMANENT ||
-	       time_is_after_jiffies(timeout);
-}
-
-static inline bool
-ip_set_timeout_expired(unsigned long timeout)
-{
-	return timeout != IPSET_ELEM_PERMANENT &&
-	       time_is_before_jiffies(timeout);
-}
-
-static inline unsigned long
-ip_set_timeout_set(u32 timeout)
-{
-	unsigned long t;
-
-	if (!timeout)
-		return IPSET_ELEM_PERMANENT;
-
-	t = msecs_to_jiffies(timeout * 1000) + jiffies;
-	if (t == IPSET_ELEM_PERMANENT)
-		/* Bingo! :-) */
-		t++;
-
-	return t;
-}
-
-static inline u32
-ip_set_timeout_get(unsigned long timeout)
-{
-	return timeout == IPSET_ELEM_PERMANENT ? 0 :
-		jiffies_to_msecs(timeout - jiffies)/1000;
-}
-#endif /* ! IP_SET_BITMAP_TIMEOUT */
-
-#endif	/* __KERNEL__ */
-
-#endif /* _IP_SET_TIMEOUT_H */
diff --git a/ANDROID_3.4.5/include/linux/netfilter/ipset/pfxlen.h b/ANDROID_3.4.5/include/linux/netfilter/ipset/pfxlen.h
deleted file mode 100644
index 199fd11f..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter/ipset/pfxlen.h
+++ /dev/null
@@ -1,44 +0,0 @@
-#ifndef _PFXLEN_H
-#define _PFXLEN_H
-
-#include <asm/byteorder.h>
-#include <linux/netfilter.h>
-#include <net/tcp.h>
-
-/* Prefixlen maps, by Jan Engelhardt  */
-extern const union nf_inet_addr ip_set_netmask_map[];
-extern const union nf_inet_addr ip_set_hostmask_map[];
-
-static inline __be32
-ip_set_netmask(u8 pfxlen)
-{
-	return ip_set_netmask_map[pfxlen].ip;
-}
-
-static inline const __be32 *
-ip_set_netmask6(u8 pfxlen)
-{
-	return &ip_set_netmask_map[pfxlen].ip6[0];
-}
-
-static inline u32
-ip_set_hostmask(u8 pfxlen)
-{
-	return (__force u32) ip_set_hostmask_map[pfxlen].ip;
-}
-
-static inline const __be32 *
-ip_set_hostmask6(u8 pfxlen)
-{
-	return &ip_set_hostmask_map[pfxlen].ip6[0];
-}
-
-extern u32 ip_set_range_to_cidr(u32 from, u32 to, u8 *cidr);
-
-#define ip_set_mask_from_to(from, to, cidr)	\
-do {						\
-	from &= ip_set_hostmask(cidr);		\
-	to = from | ~ip_set_hostmask(cidr);	\
-} while (0)
-
-#endif /*_PFXLEN_H */
diff --git a/ANDROID_3.4.5/include/linux/netfilter/nf_conntrack_amanda.h b/ANDROID_3.4.5/include/linux/netfilter/nf_conntrack_amanda.h
deleted file mode 100644
index 0bb5a697..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter/nf_conntrack_amanda.h
+++ /dev/null
@@ -1,10 +0,0 @@
-#ifndef _NF_CONNTRACK_AMANDA_H
-#define _NF_CONNTRACK_AMANDA_H
-/* AMANDA tracking. */
-
-extern unsigned int (*nf_nat_amanda_hook)(struct sk_buff *skb,
-					  enum ip_conntrack_info ctinfo,
-					  unsigned int matchoff,
-					  unsigned int matchlen,
-					  struct nf_conntrack_expect *exp);
-#endif /* _NF_CONNTRACK_AMANDA_H */
diff --git a/ANDROID_3.4.5/include/linux/netfilter/nf_conntrack_common.h b/ANDROID_3.4.5/include/linux/netfilter/nf_conntrack_common.h
deleted file mode 100644
index 0d3dd663..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter/nf_conntrack_common.h
+++ /dev/null
@@ -1,137 +0,0 @@
-#ifndef _NF_CONNTRACK_COMMON_H
-#define _NF_CONNTRACK_COMMON_H
-/* Connection state tracking for netfilter.  This is separated from,
-   but required by, the NAT layer; it can also be used by an iptables
-   extension. */
-enum ip_conntrack_info {
-	/* Part of an established connection (either direction). */
-	IP_CT_ESTABLISHED,
-
-	/* Like NEW, but related to an existing connection, or ICMP error
-	   (in either direction). */
-	IP_CT_RELATED,
-
-	/* Started a new connection to track (only
-           IP_CT_DIR_ORIGINAL); may be a retransmission. */
-	IP_CT_NEW,
-
-	/* >= this indicates reply direction */
-	IP_CT_IS_REPLY,
-
-	IP_CT_ESTABLISHED_REPLY = IP_CT_ESTABLISHED + IP_CT_IS_REPLY,
-	IP_CT_RELATED_REPLY = IP_CT_RELATED + IP_CT_IS_REPLY,
-	IP_CT_NEW_REPLY = IP_CT_NEW + IP_CT_IS_REPLY,	
-	/* Number of distinct IP_CT types (no NEW in reply dirn). */
-	IP_CT_NUMBER = IP_CT_IS_REPLY * 2 - 1
-};
-
-/* Bitset representing status of connection. */
-enum ip_conntrack_status {
-	/* It's an expected connection: bit 0 set.  This bit never changed */
-	IPS_EXPECTED_BIT = 0,
-	IPS_EXPECTED = (1 << IPS_EXPECTED_BIT),
-
-	/* We've seen packets both ways: bit 1 set.  Can be set, not unset. */
-	IPS_SEEN_REPLY_BIT = 1,
-	IPS_SEEN_REPLY = (1 << IPS_SEEN_REPLY_BIT),
-
-	/* Conntrack should never be early-expired. */
-	IPS_ASSURED_BIT = 2,
-	IPS_ASSURED = (1 << IPS_ASSURED_BIT),
-
-	/* Connection is confirmed: originating packet has left box */
-	IPS_CONFIRMED_BIT = 3,
-	IPS_CONFIRMED = (1 << IPS_CONFIRMED_BIT),
-
-	/* Connection needs src nat in orig dir.  This bit never changed. */
-	IPS_SRC_NAT_BIT = 4,
-	IPS_SRC_NAT = (1 << IPS_SRC_NAT_BIT),
-
-	/* Connection needs dst nat in orig dir.  This bit never changed. */
-	IPS_DST_NAT_BIT = 5,
-	IPS_DST_NAT = (1 << IPS_DST_NAT_BIT),
-
-	/* Both together. */
-	IPS_NAT_MASK = (IPS_DST_NAT | IPS_SRC_NAT),
-
-	/* Connection needs TCP sequence adjusted. */
-	IPS_SEQ_ADJUST_BIT = 6,
-	IPS_SEQ_ADJUST = (1 << IPS_SEQ_ADJUST_BIT),
-
-	/* NAT initialization bits. */
-	IPS_SRC_NAT_DONE_BIT = 7,
-	IPS_SRC_NAT_DONE = (1 << IPS_SRC_NAT_DONE_BIT),
-
-	IPS_DST_NAT_DONE_BIT = 8,
-	IPS_DST_NAT_DONE = (1 << IPS_DST_NAT_DONE_BIT),
-
-	/* Both together */
-	IPS_NAT_DONE_MASK = (IPS_DST_NAT_DONE | IPS_SRC_NAT_DONE),
-
-	/* Connection is dying (removed from lists), can not be unset. */
-	IPS_DYING_BIT = 9,
-	IPS_DYING = (1 << IPS_DYING_BIT),
-
-	/* Connection has fixed timeout. */
-	IPS_FIXED_TIMEOUT_BIT = 10,
-	IPS_FIXED_TIMEOUT = (1 << IPS_FIXED_TIMEOUT_BIT),
-
-	/* Conntrack is a template */
-	IPS_TEMPLATE_BIT = 11,
-	IPS_TEMPLATE = (1 << IPS_TEMPLATE_BIT),
-
-	/* Conntrack is a fake untracked entry */
-	IPS_UNTRACKED_BIT = 12,
-	IPS_UNTRACKED = (1 << IPS_UNTRACKED_BIT),
-};
-
-/* Connection tracking event types */
-enum ip_conntrack_events {
-	IPCT_NEW,		/* new conntrack */
-	IPCT_RELATED,		/* related conntrack */
-	IPCT_DESTROY,		/* destroyed conntrack */
-	IPCT_REPLY,		/* connection has seen two-way traffic */
-	IPCT_ASSURED,		/* connection status has changed to assured */
-	IPCT_PROTOINFO,		/* protocol information has changed */
-	IPCT_HELPER,		/* new helper has been set */
-	IPCT_MARK,		/* new mark has been set */
-	IPCT_NATSEQADJ,		/* NAT is doing sequence adjustment */
-	IPCT_SECMARK,		/* new security mark has been set */
-};
-
-enum ip_conntrack_expect_events {
-	IPEXP_NEW,		/* new expectation */
-	IPEXP_DESTROY,		/* destroyed expectation */
-};
-
-/* expectation flags */
-#define NF_CT_EXPECT_PERMANENT		0x1
-#define NF_CT_EXPECT_INACTIVE		0x2
-#define NF_CT_EXPECT_USERSPACE		0x4
-
-#ifdef __KERNEL__
-struct ip_conntrack_stat {
-	unsigned int searched;
-	unsigned int found;
-	unsigned int new;
-	unsigned int invalid;
-	unsigned int ignore;
-	unsigned int delete;
-	unsigned int delete_list;
-	unsigned int insert;
-	unsigned int insert_failed;
-	unsigned int drop;
-	unsigned int early_drop;
-	unsigned int error;
-	unsigned int expect_new;
-	unsigned int expect_create;
-	unsigned int expect_delete;
-	unsigned int search_restart;
-};
-
-/* call to create an explicit dependency on nf_conntrack. */
-extern void need_conntrack(void);
-
-#endif /* __KERNEL__ */
-
-#endif /* _NF_CONNTRACK_COMMON_H */
diff --git a/ANDROID_3.4.5/include/linux/netfilter/nf_conntrack_dccp.h b/ANDROID_3.4.5/include/linux/netfilter/nf_conntrack_dccp.h
deleted file mode 100644
index 40dcc820..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter/nf_conntrack_dccp.h
+++ /dev/null
@@ -1,40 +0,0 @@
-#ifndef _NF_CONNTRACK_DCCP_H
-#define _NF_CONNTRACK_DCCP_H
-
-/* Exposed to userspace over nfnetlink */
-enum ct_dccp_states {
-	CT_DCCP_NONE,
-	CT_DCCP_REQUEST,
-	CT_DCCP_RESPOND,
-	CT_DCCP_PARTOPEN,
-	CT_DCCP_OPEN,
-	CT_DCCP_CLOSEREQ,
-	CT_DCCP_CLOSING,
-	CT_DCCP_TIMEWAIT,
-	CT_DCCP_IGNORE,
-	CT_DCCP_INVALID,
-	__CT_DCCP_MAX
-};
-#define CT_DCCP_MAX		(__CT_DCCP_MAX - 1)
-
-enum ct_dccp_roles {
-	CT_DCCP_ROLE_CLIENT,
-	CT_DCCP_ROLE_SERVER,
-	__CT_DCCP_ROLE_MAX
-};
-#define CT_DCCP_ROLE_MAX	(__CT_DCCP_ROLE_MAX - 1)
-
-#ifdef __KERNEL__
-#include <net/netfilter/nf_conntrack_tuple.h>
-
-struct nf_ct_dccp {
-	u_int8_t	role[IP_CT_DIR_MAX];
-	u_int8_t	state;
-	u_int8_t	last_pkt;
-	u_int8_t	last_dir;
-	u_int64_t	handshake_seq;
-};
-
-#endif /* __KERNEL__ */
-
-#endif /* _NF_CONNTRACK_DCCP_H */
diff --git a/ANDROID_3.4.5/include/linux/netfilter/nf_conntrack_ftp.h b/ANDROID_3.4.5/include/linux/netfilter/nf_conntrack_ftp.h
deleted file mode 100644
index 3e3aa089..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter/nf_conntrack_ftp.h
+++ /dev/null
@@ -1,42 +0,0 @@
-#ifndef _NF_CONNTRACK_FTP_H
-#define _NF_CONNTRACK_FTP_H
-/* FTP tracking. */
-
-/* This enum is exposed to userspace */
-enum nf_ct_ftp_type {
-	/* PORT command from client */
-	NF_CT_FTP_PORT,
-	/* PASV response from server */
-	NF_CT_FTP_PASV,
-	/* EPRT command from client */
-	NF_CT_FTP_EPRT,
-	/* EPSV response from server */
-	NF_CT_FTP_EPSV,
-};
-
-#ifdef __KERNEL__
-
-#define FTP_PORT	21
-
-#define NUM_SEQ_TO_REMEMBER 2
-/* This structure exists only once per master */
-struct nf_ct_ftp_master {
-	/* Valid seq positions for cmd matching after newline */
-	u_int32_t seq_aft_nl[IP_CT_DIR_MAX][NUM_SEQ_TO_REMEMBER];
-	/* 0 means seq_match_aft_nl not set */
-	int seq_aft_nl_num[IP_CT_DIR_MAX];
-};
-
-struct nf_conntrack_expect;
-
-/* For NAT to hook in when we find a packet which describes what other
- * connection we should expect. */
-extern unsigned int (*nf_nat_ftp_hook)(struct sk_buff *skb,
-				       enum ip_conntrack_info ctinfo,
-				       enum nf_ct_ftp_type type,
-				       unsigned int matchoff,
-				       unsigned int matchlen,
-				       struct nf_conntrack_expect *exp);
-#endif /* __KERNEL__ */
-
-#endif /* _NF_CONNTRACK_FTP_H */
diff --git a/ANDROID_3.4.5/include/linux/netfilter/nf_conntrack_h323.h b/ANDROID_3.4.5/include/linux/netfilter/nf_conntrack_h323.h
deleted file mode 100644
index 26f9226e..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter/nf_conntrack_h323.h
+++ /dev/null
@@ -1,92 +0,0 @@
-#ifndef _NF_CONNTRACK_H323_H
-#define _NF_CONNTRACK_H323_H
-
-#ifdef __KERNEL__
-
-#include <linux/netfilter/nf_conntrack_h323_asn1.h>
-
-#define RAS_PORT 1719
-#define Q931_PORT 1720
-#define H323_RTP_CHANNEL_MAX 4	/* Audio, video, FAX and other */
-
-/* This structure exists only once per master */
-struct nf_ct_h323_master {
-
-	/* Original and NATed Q.931 or H.245 signal ports */
-	__be16 sig_port[IP_CT_DIR_MAX];
-
-	/* Original and NATed RTP ports */
-	__be16 rtp_port[H323_RTP_CHANNEL_MAX][IP_CT_DIR_MAX];
-
-	union {
-		/* RAS connection timeout */
-		u_int32_t timeout;
-
-		/* Next TPKT length (for separate TPKT header and data) */
-		u_int16_t tpkt_len[IP_CT_DIR_MAX];
-	};
-};
-
-struct nf_conn;
-
-extern int get_h225_addr(struct nf_conn *ct, unsigned char *data,
-			 TransportAddress *taddr,
-			 union nf_inet_addr *addr, __be16 *port);
-extern void nf_conntrack_h245_expect(struct nf_conn *new,
-				     struct nf_conntrack_expect *this);
-extern void nf_conntrack_q931_expect(struct nf_conn *new,
-				     struct nf_conntrack_expect *this);
-extern int (*set_h245_addr_hook) (struct sk_buff *skb,
-				  unsigned char **data, int dataoff,
-				  H245_TransportAddress *taddr,
-				  union nf_inet_addr *addr,
-				  __be16 port);
-extern int (*set_h225_addr_hook) (struct sk_buff *skb,
-				  unsigned char **data, int dataoff,
-				  TransportAddress *taddr,
-				  union nf_inet_addr *addr,
-				  __be16 port);
-extern int (*set_sig_addr_hook) (struct sk_buff *skb,
-				 struct nf_conn *ct,
-				 enum ip_conntrack_info ctinfo,
-				 unsigned char **data,
-				 TransportAddress *taddr, int count);
-extern int (*set_ras_addr_hook) (struct sk_buff *skb,
-				 struct nf_conn *ct,
-				 enum ip_conntrack_info ctinfo,
-				 unsigned char **data,
-				 TransportAddress *taddr, int count);
-extern int (*nat_rtp_rtcp_hook) (struct sk_buff *skb,
-				 struct nf_conn *ct,
-				 enum ip_conntrack_info ctinfo,
-				 unsigned char **data, int dataoff,
-				 H245_TransportAddress *taddr,
-				 __be16 port, __be16 rtp_port,
-				 struct nf_conntrack_expect *rtp_exp,
-				 struct nf_conntrack_expect *rtcp_exp);
-extern int (*nat_t120_hook) (struct sk_buff *skb, struct nf_conn *ct,
-			     enum ip_conntrack_info ctinfo,
-			     unsigned char **data, int dataoff,
-			     H245_TransportAddress *taddr, __be16 port,
-			     struct nf_conntrack_expect *exp);
-extern int (*nat_h245_hook) (struct sk_buff *skb, struct nf_conn *ct,
-			     enum ip_conntrack_info ctinfo,
-			     unsigned char **data, int dataoff,
-			     TransportAddress *taddr, __be16 port,
-			     struct nf_conntrack_expect *exp);
-extern int (*nat_callforwarding_hook) (struct sk_buff *skb,
-				       struct nf_conn *ct,
-				       enum ip_conntrack_info ctinfo,
-				       unsigned char **data, int dataoff,
-				       TransportAddress *taddr,
-				       __be16 port,
-				       struct nf_conntrack_expect *exp);
-extern int (*nat_q931_hook) (struct sk_buff *skb, struct nf_conn *ct,
-			     enum ip_conntrack_info ctinfo,
-			     unsigned char **data, TransportAddress *taddr,
-			     int idx, __be16 port,
-			     struct nf_conntrack_expect *exp);
-
-#endif
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/netfilter/nf_conntrack_h323_asn1.h b/ANDROID_3.4.5/include/linux/netfilter/nf_conntrack_h323_asn1.h
deleted file mode 100644
index 8dab5968..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter/nf_conntrack_h323_asn1.h
+++ /dev/null
@@ -1,98 +0,0 @@
-/****************************************************************************
- * ip_conntrack_h323_asn1.h - BER and PER decoding library for H.323
- * 			      conntrack/NAT module.
- *
- * Copyright (c) 2006 by Jing Min Zhao <zhaojingmin@users.sourceforge.net>
- *
- * This source code is licensed under General Public License version 2.
- *
- *
- * This library is based on H.225 version 4, H.235 version 2 and H.245
- * version 7. It is extremely optimized to decode only the absolutely
- * necessary objects in a signal for Linux kernel NAT module use, so don't
- * expect it to be a full ASN.1 library.
- *
- * Features:
- *
- * 1. Small. The total size of code plus data is less than 20 KB (IA32).
- * 2. Fast. Decoding Netmeeting's Setup signal 1 million times on a PIII 866
- *    takes only 3.9 seconds.
- * 3. No memory allocation. It uses a static object. No need to initialize or
- *    cleanup.
- * 4. Thread safe.
- * 5. Support embedded architectures that has no misaligned memory access
- *    support.
- *
- * Limitations:
- *
- * 1. At most 30 faststart entries. Actually this is limited by ethernet's MTU.
- *    If a Setup signal contains more than 30 faststart, the packet size will
- *    very likely exceed the MTU size, then the TPKT will be fragmented. I
- *    don't know how to handle this in a Netfilter module. Anybody can help?
- *    Although I think 30 is enough for most of the cases.
- * 2. IPv4 addresses only.
- *
- ****************************************************************************/
-
-#ifndef _NF_CONNTRACK_HELPER_H323_ASN1_H_
-#define _NF_CONNTRACK_HELPER_H323_ASN1_H_
-
-/*****************************************************************************
- * H.323 Types
- ****************************************************************************/
-#include "nf_conntrack_h323_types.h"
-
-typedef struct {
-	enum {
-		Q931_NationalEscape = 0x00,
-		Q931_Alerting = 0x01,
-		Q931_CallProceeding = 0x02,
-		Q931_Connect = 0x07,
-		Q931_ConnectAck = 0x0F,
-		Q931_Progress = 0x03,
-		Q931_Setup = 0x05,
-		Q931_SetupAck = 0x0D,
-		Q931_Resume = 0x26,
-		Q931_ResumeAck = 0x2E,
-		Q931_ResumeReject = 0x22,
-		Q931_Suspend = 0x25,
-		Q931_SuspendAck = 0x2D,
-		Q931_SuspendReject = 0x21,
-		Q931_UserInformation = 0x20,
-		Q931_Disconnect = 0x45,
-		Q931_Release = 0x4D,
-		Q931_ReleaseComplete = 0x5A,
-		Q931_Restart = 0x46,
-		Q931_RestartAck = 0x4E,
-		Q931_Segment = 0x60,
-		Q931_CongestionCtrl = 0x79,
-		Q931_Information = 0x7B,
-		Q931_Notify = 0x6E,
-		Q931_Status = 0x7D,
-		Q931_StatusEnquiry = 0x75,
-		Q931_Facility = 0x62
-	} MessageType;
-	H323_UserInformation UUIE;
-} Q931;
-
-/*****************************************************************************
- * Decode Functions Return Codes
- ****************************************************************************/
-
-#define H323_ERROR_NONE 0	/* Decoded successfully */
-#define H323_ERROR_STOP 1	/* Decoding stopped, not really an error */
-#define H323_ERROR_BOUND -1
-#define H323_ERROR_RANGE -2
-
-
-/*****************************************************************************
- * Decode Functions
- ****************************************************************************/
-
-int DecodeRasMessage(unsigned char *buf, size_t sz, RasMessage * ras);
-int DecodeQ931(unsigned char *buf, size_t sz, Q931 * q931);
-int DecodeMultimediaSystemControlMessage(unsigned char *buf, size_t sz,
-					 MultimediaSystemControlMessage *
-					 mscm);
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/netfilter/nf_conntrack_h323_types.h b/ANDROID_3.4.5/include/linux/netfilter/nf_conntrack_h323_types.h
deleted file mode 100644
index f35b6b48..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter/nf_conntrack_h323_types.h
+++ /dev/null
@@ -1,934 +0,0 @@
-/* Generated by Jing Min Zhao's ASN.1 parser, May 16 2007
- *
- * Copyright (c) 2006 Jing Min Zhao <zhaojingmin@users.sourceforge.net>
- *
- * This source code is licensed under General Public License version 2.
- */
-
-typedef struct TransportAddress_ipAddress {	/* SEQUENCE */
-	int options;		/* No use */
-	unsigned ip;
-} TransportAddress_ipAddress;
-
-typedef struct TransportAddress_ip6Address {	/* SEQUENCE */
-	int options;		/* No use */
-	unsigned ip;
-} TransportAddress_ip6Address;
-
-typedef struct TransportAddress {	/* CHOICE */
-	enum {
-		eTransportAddress_ipAddress,
-		eTransportAddress_ipSourceRoute,
-		eTransportAddress_ipxAddress,
-		eTransportAddress_ip6Address,
-		eTransportAddress_netBios,
-		eTransportAddress_nsap,
-		eTransportAddress_nonStandardAddress,
-	} choice;
-	union {
-		TransportAddress_ipAddress ipAddress;
-		TransportAddress_ip6Address ip6Address;
-	};
-} TransportAddress;
-
-typedef struct DataProtocolCapability {	/* CHOICE */
-	enum {
-		eDataProtocolCapability_nonStandard,
-		eDataProtocolCapability_v14buffered,
-		eDataProtocolCapability_v42lapm,
-		eDataProtocolCapability_hdlcFrameTunnelling,
-		eDataProtocolCapability_h310SeparateVCStack,
-		eDataProtocolCapability_h310SingleVCStack,
-		eDataProtocolCapability_transparent,
-		eDataProtocolCapability_segmentationAndReassembly,
-		eDataProtocolCapability_hdlcFrameTunnelingwSAR,
-		eDataProtocolCapability_v120,
-		eDataProtocolCapability_separateLANStack,
-		eDataProtocolCapability_v76wCompression,
-		eDataProtocolCapability_tcp,
-		eDataProtocolCapability_udp,
-	} choice;
-} DataProtocolCapability;
-
-typedef struct DataApplicationCapability_application {	/* CHOICE */
-	enum {
-		eDataApplicationCapability_application_nonStandard,
-		eDataApplicationCapability_application_t120,
-		eDataApplicationCapability_application_dsm_cc,
-		eDataApplicationCapability_application_userData,
-		eDataApplicationCapability_application_t84,
-		eDataApplicationCapability_application_t434,
-		eDataApplicationCapability_application_h224,
-		eDataApplicationCapability_application_nlpid,
-		eDataApplicationCapability_application_dsvdControl,
-		eDataApplicationCapability_application_h222DataPartitioning,
-		eDataApplicationCapability_application_t30fax,
-		eDataApplicationCapability_application_t140,
-		eDataApplicationCapability_application_t38fax,
-		eDataApplicationCapability_application_genericDataCapability,
-	} choice;
-	union {
-		DataProtocolCapability t120;
-	};
-} DataApplicationCapability_application;
-
-typedef struct DataApplicationCapability {	/* SEQUENCE */
-	int options;		/* No use */
-	DataApplicationCapability_application application;
-} DataApplicationCapability;
-
-typedef struct DataType {	/* CHOICE */
-	enum {
-		eDataType_nonStandard,
-		eDataType_nullData,
-		eDataType_videoData,
-		eDataType_audioData,
-		eDataType_data,
-		eDataType_encryptionData,
-		eDataType_h235Control,
-		eDataType_h235Media,
-		eDataType_multiplexedStream,
-	} choice;
-	union {
-		DataApplicationCapability data;
-	};
-} DataType;
-
-typedef struct UnicastAddress_iPAddress {	/* SEQUENCE */
-	int options;		/* No use */
-	unsigned network;
-} UnicastAddress_iPAddress;
-
-typedef struct UnicastAddress_iP6Address {	/* SEQUENCE */
-	int options;		/* No use */
-	unsigned network;
-} UnicastAddress_iP6Address;
-
-typedef struct UnicastAddress {	/* CHOICE */
-	enum {
-		eUnicastAddress_iPAddress,
-		eUnicastAddress_iPXAddress,
-		eUnicastAddress_iP6Address,
-		eUnicastAddress_netBios,
-		eUnicastAddress_iPSourceRouteAddress,
-		eUnicastAddress_nsap,
-		eUnicastAddress_nonStandardAddress,
-	} choice;
-	union {
-		UnicastAddress_iPAddress iPAddress;
-		UnicastAddress_iP6Address iP6Address;
-	};
-} UnicastAddress;
-
-typedef struct H245_TransportAddress {	/* CHOICE */
-	enum {
-		eH245_TransportAddress_unicastAddress,
-		eH245_TransportAddress_multicastAddress,
-	} choice;
-	union {
-		UnicastAddress unicastAddress;
-	};
-} H245_TransportAddress;
-
-typedef struct H2250LogicalChannelParameters {	/* SEQUENCE */
-	enum {
-		eH2250LogicalChannelParameters_nonStandard = (1 << 31),
-		eH2250LogicalChannelParameters_associatedSessionID =
-		    (1 << 30),
-		eH2250LogicalChannelParameters_mediaChannel = (1 << 29),
-		eH2250LogicalChannelParameters_mediaGuaranteedDelivery =
-		    (1 << 28),
-		eH2250LogicalChannelParameters_mediaControlChannel =
-		    (1 << 27),
-		eH2250LogicalChannelParameters_mediaControlGuaranteedDelivery
-		    = (1 << 26),
-		eH2250LogicalChannelParameters_silenceSuppression = (1 << 25),
-		eH2250LogicalChannelParameters_destination = (1 << 24),
-		eH2250LogicalChannelParameters_dynamicRTPPayloadType =
-		    (1 << 23),
-		eH2250LogicalChannelParameters_mediaPacketization = (1 << 22),
-		eH2250LogicalChannelParameters_transportCapability =
-		    (1 << 21),
-		eH2250LogicalChannelParameters_redundancyEncoding = (1 << 20),
-		eH2250LogicalChannelParameters_source = (1 << 19),
-	} options;
-	H245_TransportAddress mediaChannel;
-	H245_TransportAddress mediaControlChannel;
-} H2250LogicalChannelParameters;
-
-typedef struct OpenLogicalChannel_forwardLogicalChannelParameters_multiplexParameters {	/* CHOICE */
-	enum {
-		eOpenLogicalChannel_forwardLogicalChannelParameters_multiplexParameters_h222LogicalChannelParameters,
-		eOpenLogicalChannel_forwardLogicalChannelParameters_multiplexParameters_h223LogicalChannelParameters,
-		eOpenLogicalChannel_forwardLogicalChannelParameters_multiplexParameters_v76LogicalChannelParameters,
-		eOpenLogicalChannel_forwardLogicalChannelParameters_multiplexParameters_h2250LogicalChannelParameters,
-		eOpenLogicalChannel_forwardLogicalChannelParameters_multiplexParameters_none,
-	} choice;
-	union {
-		H2250LogicalChannelParameters h2250LogicalChannelParameters;
-	};
-} OpenLogicalChannel_forwardLogicalChannelParameters_multiplexParameters;
-
-typedef struct OpenLogicalChannel_forwardLogicalChannelParameters {	/* SEQUENCE */
-	enum {
-		eOpenLogicalChannel_forwardLogicalChannelParameters_portNumber
-		    = (1 << 31),
-		eOpenLogicalChannel_forwardLogicalChannelParameters_forwardLogicalChannelDependency
-		    = (1 << 30),
-		eOpenLogicalChannel_forwardLogicalChannelParameters_replacementFor
-		    = (1 << 29),
-	} options;
-	DataType dataType;
-	OpenLogicalChannel_forwardLogicalChannelParameters_multiplexParameters
-	    multiplexParameters;
-} OpenLogicalChannel_forwardLogicalChannelParameters;
-
-typedef struct OpenLogicalChannel_reverseLogicalChannelParameters_multiplexParameters {	/* CHOICE */
-	enum {
-		eOpenLogicalChannel_reverseLogicalChannelParameters_multiplexParameters_h223LogicalChannelParameters,
-		eOpenLogicalChannel_reverseLogicalChannelParameters_multiplexParameters_v76LogicalChannelParameters,
-		eOpenLogicalChannel_reverseLogicalChannelParameters_multiplexParameters_h2250LogicalChannelParameters,
-	} choice;
-	union {
-		H2250LogicalChannelParameters h2250LogicalChannelParameters;
-	};
-} OpenLogicalChannel_reverseLogicalChannelParameters_multiplexParameters;
-
-typedef struct OpenLogicalChannel_reverseLogicalChannelParameters {	/* SEQUENCE */
-	enum {
-		eOpenLogicalChannel_reverseLogicalChannelParameters_multiplexParameters
-		    = (1 << 31),
-		eOpenLogicalChannel_reverseLogicalChannelParameters_reverseLogicalChannelDependency
-		    = (1 << 30),
-		eOpenLogicalChannel_reverseLogicalChannelParameters_replacementFor
-		    = (1 << 29),
-	} options;
-	OpenLogicalChannel_reverseLogicalChannelParameters_multiplexParameters
-	    multiplexParameters;
-} OpenLogicalChannel_reverseLogicalChannelParameters;
-
-typedef struct NetworkAccessParameters_networkAddress {	/* CHOICE */
-	enum {
-		eNetworkAccessParameters_networkAddress_q2931Address,
-		eNetworkAccessParameters_networkAddress_e164Address,
-		eNetworkAccessParameters_networkAddress_localAreaAddress,
-	} choice;
-	union {
-		H245_TransportAddress localAreaAddress;
-	};
-} NetworkAccessParameters_networkAddress;
-
-typedef struct NetworkAccessParameters {	/* SEQUENCE */
-	enum {
-		eNetworkAccessParameters_distribution = (1 << 31),
-		eNetworkAccessParameters_externalReference = (1 << 30),
-		eNetworkAccessParameters_t120SetupProcedure = (1 << 29),
-	} options;
-	NetworkAccessParameters_networkAddress networkAddress;
-} NetworkAccessParameters;
-
-typedef struct OpenLogicalChannel {	/* SEQUENCE */
-	enum {
-		eOpenLogicalChannel_reverseLogicalChannelParameters =
-		    (1 << 31),
-		eOpenLogicalChannel_separateStack = (1 << 30),
-		eOpenLogicalChannel_encryptionSync = (1 << 29),
-	} options;
-	OpenLogicalChannel_forwardLogicalChannelParameters
-	    forwardLogicalChannelParameters;
-	OpenLogicalChannel_reverseLogicalChannelParameters
-	    reverseLogicalChannelParameters;
-	NetworkAccessParameters separateStack;
-} OpenLogicalChannel;
-
-typedef struct Setup_UUIE_fastStart {	/* SEQUENCE OF */
-	int count;
-	OpenLogicalChannel item[30];
-} Setup_UUIE_fastStart;
-
-typedef struct Setup_UUIE {	/* SEQUENCE */
-	enum {
-		eSetup_UUIE_h245Address = (1 << 31),
-		eSetup_UUIE_sourceAddress = (1 << 30),
-		eSetup_UUIE_destinationAddress = (1 << 29),
-		eSetup_UUIE_destCallSignalAddress = (1 << 28),
-		eSetup_UUIE_destExtraCallInfo = (1 << 27),
-		eSetup_UUIE_destExtraCRV = (1 << 26),
-		eSetup_UUIE_callServices = (1 << 25),
-		eSetup_UUIE_sourceCallSignalAddress = (1 << 24),
-		eSetup_UUIE_remoteExtensionAddress = (1 << 23),
-		eSetup_UUIE_callIdentifier = (1 << 22),
-		eSetup_UUIE_h245SecurityCapability = (1 << 21),
-		eSetup_UUIE_tokens = (1 << 20),
-		eSetup_UUIE_cryptoTokens = (1 << 19),
-		eSetup_UUIE_fastStart = (1 << 18),
-		eSetup_UUIE_mediaWaitForConnect = (1 << 17),
-		eSetup_UUIE_canOverlapSend = (1 << 16),
-		eSetup_UUIE_endpointIdentifier = (1 << 15),
-		eSetup_UUIE_multipleCalls = (1 << 14),
-		eSetup_UUIE_maintainConnection = (1 << 13),
-		eSetup_UUIE_connectionParameters = (1 << 12),
-		eSetup_UUIE_language = (1 << 11),
-		eSetup_UUIE_presentationIndicator = (1 << 10),
-		eSetup_UUIE_screeningIndicator = (1 << 9),
-		eSetup_UUIE_serviceControl = (1 << 8),
-		eSetup_UUIE_symmetricOperationRequired = (1 << 7),
-		eSetup_UUIE_capacity = (1 << 6),
-		eSetup_UUIE_circuitInfo = (1 << 5),
-		eSetup_UUIE_desiredProtocols = (1 << 4),
-		eSetup_UUIE_neededFeatures = (1 << 3),
-		eSetup_UUIE_desiredFeatures = (1 << 2),
-		eSetup_UUIE_supportedFeatures = (1 << 1),
-		eSetup_UUIE_parallelH245Control = (1 << 0),
-	} options;
-	TransportAddress h245Address;
-	TransportAddress destCallSignalAddress;
-	TransportAddress sourceCallSignalAddress;
-	Setup_UUIE_fastStart fastStart;
-} Setup_UUIE;
-
-typedef struct CallProceeding_UUIE_fastStart {	/* SEQUENCE OF */
-	int count;
-	OpenLogicalChannel item[30];
-} CallProceeding_UUIE_fastStart;
-
-typedef struct CallProceeding_UUIE {	/* SEQUENCE */
-	enum {
-		eCallProceeding_UUIE_h245Address = (1 << 31),
-		eCallProceeding_UUIE_callIdentifier = (1 << 30),
-		eCallProceeding_UUIE_h245SecurityMode = (1 << 29),
-		eCallProceeding_UUIE_tokens = (1 << 28),
-		eCallProceeding_UUIE_cryptoTokens = (1 << 27),
-		eCallProceeding_UUIE_fastStart = (1 << 26),
-		eCallProceeding_UUIE_multipleCalls = (1 << 25),
-		eCallProceeding_UUIE_maintainConnection = (1 << 24),
-		eCallProceeding_UUIE_fastConnectRefused = (1 << 23),
-		eCallProceeding_UUIE_featureSet = (1 << 22),
-	} options;
-	TransportAddress h245Address;
-	CallProceeding_UUIE_fastStart fastStart;
-} CallProceeding_UUIE;
-
-typedef struct Connect_UUIE_fastStart {	/* SEQUENCE OF */
-	int count;
-	OpenLogicalChannel item[30];
-} Connect_UUIE_fastStart;
-
-typedef struct Connect_UUIE {	/* SEQUENCE */
-	enum {
-		eConnect_UUIE_h245Address = (1 << 31),
-		eConnect_UUIE_callIdentifier = (1 << 30),
-		eConnect_UUIE_h245SecurityMode = (1 << 29),
-		eConnect_UUIE_tokens = (1 << 28),
-		eConnect_UUIE_cryptoTokens = (1 << 27),
-		eConnect_UUIE_fastStart = (1 << 26),
-		eConnect_UUIE_multipleCalls = (1 << 25),
-		eConnect_UUIE_maintainConnection = (1 << 24),
-		eConnect_UUIE_language = (1 << 23),
-		eConnect_UUIE_connectedAddress = (1 << 22),
-		eConnect_UUIE_presentationIndicator = (1 << 21),
-		eConnect_UUIE_screeningIndicator = (1 << 20),
-		eConnect_UUIE_fastConnectRefused = (1 << 19),
-		eConnect_UUIE_serviceControl = (1 << 18),
-		eConnect_UUIE_capacity = (1 << 17),
-		eConnect_UUIE_featureSet = (1 << 16),
-	} options;
-	TransportAddress h245Address;
-	Connect_UUIE_fastStart fastStart;
-} Connect_UUIE;
-
-typedef struct Alerting_UUIE_fastStart {	/* SEQUENCE OF */
-	int count;
-	OpenLogicalChannel item[30];
-} Alerting_UUIE_fastStart;
-
-typedef struct Alerting_UUIE {	/* SEQUENCE */
-	enum {
-		eAlerting_UUIE_h245Address = (1 << 31),
-		eAlerting_UUIE_callIdentifier = (1 << 30),
-		eAlerting_UUIE_h245SecurityMode = (1 << 29),
-		eAlerting_UUIE_tokens = (1 << 28),
-		eAlerting_UUIE_cryptoTokens = (1 << 27),
-		eAlerting_UUIE_fastStart = (1 << 26),
-		eAlerting_UUIE_multipleCalls = (1 << 25),
-		eAlerting_UUIE_maintainConnection = (1 << 24),
-		eAlerting_UUIE_alertingAddress = (1 << 23),
-		eAlerting_UUIE_presentationIndicator = (1 << 22),
-		eAlerting_UUIE_screeningIndicator = (1 << 21),
-		eAlerting_UUIE_fastConnectRefused = (1 << 20),
-		eAlerting_UUIE_serviceControl = (1 << 19),
-		eAlerting_UUIE_capacity = (1 << 18),
-		eAlerting_UUIE_featureSet = (1 << 17),
-	} options;
-	TransportAddress h245Address;
-	Alerting_UUIE_fastStart fastStart;
-} Alerting_UUIE;
-
-typedef struct FacilityReason {	/* CHOICE */
-	enum {
-		eFacilityReason_routeCallToGatekeeper,
-		eFacilityReason_callForwarded,
-		eFacilityReason_routeCallToMC,
-		eFacilityReason_undefinedReason,
-		eFacilityReason_conferenceListChoice,
-		eFacilityReason_startH245,
-		eFacilityReason_noH245,
-		eFacilityReason_newTokens,
-		eFacilityReason_featureSetUpdate,
-		eFacilityReason_forwardedElements,
-		eFacilityReason_transportedInformation,
-	} choice;
-} FacilityReason;
-
-typedef struct Facility_UUIE_fastStart {	/* SEQUENCE OF */
-	int count;
-	OpenLogicalChannel item[30];
-} Facility_UUIE_fastStart;
-
-typedef struct Facility_UUIE {	/* SEQUENCE */
-	enum {
-		eFacility_UUIE_alternativeAddress = (1 << 31),
-		eFacility_UUIE_alternativeAliasAddress = (1 << 30),
-		eFacility_UUIE_conferenceID = (1 << 29),
-		eFacility_UUIE_callIdentifier = (1 << 28),
-		eFacility_UUIE_destExtraCallInfo = (1 << 27),
-		eFacility_UUIE_remoteExtensionAddress = (1 << 26),
-		eFacility_UUIE_tokens = (1 << 25),
-		eFacility_UUIE_cryptoTokens = (1 << 24),
-		eFacility_UUIE_conferences = (1 << 23),
-		eFacility_UUIE_h245Address = (1 << 22),
-		eFacility_UUIE_fastStart = (1 << 21),
-		eFacility_UUIE_multipleCalls = (1 << 20),
-		eFacility_UUIE_maintainConnection = (1 << 19),
-		eFacility_UUIE_fastConnectRefused = (1 << 18),
-		eFacility_UUIE_serviceControl = (1 << 17),
-		eFacility_UUIE_circuitInfo = (1 << 16),
-		eFacility_UUIE_featureSet = (1 << 15),
-		eFacility_UUIE_destinationInfo = (1 << 14),
-		eFacility_UUIE_h245SecurityMode = (1 << 13),
-	} options;
-	TransportAddress alternativeAddress;
-	FacilityReason reason;
-	TransportAddress h245Address;
-	Facility_UUIE_fastStart fastStart;
-} Facility_UUIE;
-
-typedef struct Progress_UUIE_fastStart {	/* SEQUENCE OF */
-	int count;
-	OpenLogicalChannel item[30];
-} Progress_UUIE_fastStart;
-
-typedef struct Progress_UUIE {	/* SEQUENCE */
-	enum {
-		eProgress_UUIE_h245Address = (1 << 31),
-		eProgress_UUIE_h245SecurityMode = (1 << 30),
-		eProgress_UUIE_tokens = (1 << 29),
-		eProgress_UUIE_cryptoTokens = (1 << 28),
-		eProgress_UUIE_fastStart = (1 << 27),
-		eProgress_UUIE_multipleCalls = (1 << 26),
-		eProgress_UUIE_maintainConnection = (1 << 25),
-		eProgress_UUIE_fastConnectRefused = (1 << 24),
-	} options;
-	TransportAddress h245Address;
-	Progress_UUIE_fastStart fastStart;
-} Progress_UUIE;
-
-typedef struct H323_UU_PDU_h323_message_body {	/* CHOICE */
-	enum {
-		eH323_UU_PDU_h323_message_body_setup,
-		eH323_UU_PDU_h323_message_body_callProceeding,
-		eH323_UU_PDU_h323_message_body_connect,
-		eH323_UU_PDU_h323_message_body_alerting,
-		eH323_UU_PDU_h323_message_body_information,
-		eH323_UU_PDU_h323_message_body_releaseComplete,
-		eH323_UU_PDU_h323_message_body_facility,
-		eH323_UU_PDU_h323_message_body_progress,
-		eH323_UU_PDU_h323_message_body_empty,
-		eH323_UU_PDU_h323_message_body_status,
-		eH323_UU_PDU_h323_message_body_statusInquiry,
-		eH323_UU_PDU_h323_message_body_setupAcknowledge,
-		eH323_UU_PDU_h323_message_body_notify,
-	} choice;
-	union {
-		Setup_UUIE setup;
-		CallProceeding_UUIE callProceeding;
-		Connect_UUIE connect;
-		Alerting_UUIE alerting;
-		Facility_UUIE facility;
-		Progress_UUIE progress;
-	};
-} H323_UU_PDU_h323_message_body;
-
-typedef struct RequestMessage {	/* CHOICE */
-	enum {
-		eRequestMessage_nonStandard,
-		eRequestMessage_masterSlaveDetermination,
-		eRequestMessage_terminalCapabilitySet,
-		eRequestMessage_openLogicalChannel,
-		eRequestMessage_closeLogicalChannel,
-		eRequestMessage_requestChannelClose,
-		eRequestMessage_multiplexEntrySend,
-		eRequestMessage_requestMultiplexEntry,
-		eRequestMessage_requestMode,
-		eRequestMessage_roundTripDelayRequest,
-		eRequestMessage_maintenanceLoopRequest,
-		eRequestMessage_communicationModeRequest,
-		eRequestMessage_conferenceRequest,
-		eRequestMessage_multilinkRequest,
-		eRequestMessage_logicalChannelRateRequest,
-	} choice;
-	union {
-		OpenLogicalChannel openLogicalChannel;
-	};
-} RequestMessage;
-
-typedef struct OpenLogicalChannelAck_reverseLogicalChannelParameters_multiplexParameters {	/* CHOICE */
-	enum {
-		eOpenLogicalChannelAck_reverseLogicalChannelParameters_multiplexParameters_h222LogicalChannelParameters,
-		eOpenLogicalChannelAck_reverseLogicalChannelParameters_multiplexParameters_h2250LogicalChannelParameters,
-	} choice;
-	union {
-		H2250LogicalChannelParameters h2250LogicalChannelParameters;
-	};
-} OpenLogicalChannelAck_reverseLogicalChannelParameters_multiplexParameters;
-
-typedef struct OpenLogicalChannelAck_reverseLogicalChannelParameters {	/* SEQUENCE */
-	enum {
-		eOpenLogicalChannelAck_reverseLogicalChannelParameters_portNumber
-		    = (1 << 31),
-		eOpenLogicalChannelAck_reverseLogicalChannelParameters_multiplexParameters
-		    = (1 << 30),
-		eOpenLogicalChannelAck_reverseLogicalChannelParameters_replacementFor
-		    = (1 << 29),
-	} options;
-	OpenLogicalChannelAck_reverseLogicalChannelParameters_multiplexParameters
-	    multiplexParameters;
-} OpenLogicalChannelAck_reverseLogicalChannelParameters;
-
-typedef struct H2250LogicalChannelAckParameters {	/* SEQUENCE */
-	enum {
-		eH2250LogicalChannelAckParameters_nonStandard = (1 << 31),
-		eH2250LogicalChannelAckParameters_sessionID = (1 << 30),
-		eH2250LogicalChannelAckParameters_mediaChannel = (1 << 29),
-		eH2250LogicalChannelAckParameters_mediaControlChannel =
-		    (1 << 28),
-		eH2250LogicalChannelAckParameters_dynamicRTPPayloadType =
-		    (1 << 27),
-		eH2250LogicalChannelAckParameters_flowControlToZero =
-		    (1 << 26),
-		eH2250LogicalChannelAckParameters_portNumber = (1 << 25),
-	} options;
-	H245_TransportAddress mediaChannel;
-	H245_TransportAddress mediaControlChannel;
-} H2250LogicalChannelAckParameters;
-
-typedef struct OpenLogicalChannelAck_forwardMultiplexAckParameters {	/* CHOICE */
-	enum {
-		eOpenLogicalChannelAck_forwardMultiplexAckParameters_h2250LogicalChannelAckParameters,
-	} choice;
-	union {
-		H2250LogicalChannelAckParameters
-		    h2250LogicalChannelAckParameters;
-	};
-} OpenLogicalChannelAck_forwardMultiplexAckParameters;
-
-typedef struct OpenLogicalChannelAck {	/* SEQUENCE */
-	enum {
-		eOpenLogicalChannelAck_reverseLogicalChannelParameters =
-		    (1 << 31),
-		eOpenLogicalChannelAck_separateStack = (1 << 30),
-		eOpenLogicalChannelAck_forwardMultiplexAckParameters =
-		    (1 << 29),
-		eOpenLogicalChannelAck_encryptionSync = (1 << 28),
-	} options;
-	OpenLogicalChannelAck_reverseLogicalChannelParameters
-	    reverseLogicalChannelParameters;
-	NetworkAccessParameters separateStack;
-	OpenLogicalChannelAck_forwardMultiplexAckParameters
-	    forwardMultiplexAckParameters;
-} OpenLogicalChannelAck;
-
-typedef struct ResponseMessage {	/* CHOICE */
-	enum {
-		eResponseMessage_nonStandard,
-		eResponseMessage_masterSlaveDeterminationAck,
-		eResponseMessage_masterSlaveDeterminationReject,
-		eResponseMessage_terminalCapabilitySetAck,
-		eResponseMessage_terminalCapabilitySetReject,
-		eResponseMessage_openLogicalChannelAck,
-		eResponseMessage_openLogicalChannelReject,
-		eResponseMessage_closeLogicalChannelAck,
-		eResponseMessage_requestChannelCloseAck,
-		eResponseMessage_requestChannelCloseReject,
-		eResponseMessage_multiplexEntrySendAck,
-		eResponseMessage_multiplexEntrySendReject,
-		eResponseMessage_requestMultiplexEntryAck,
-		eResponseMessage_requestMultiplexEntryReject,
-		eResponseMessage_requestModeAck,
-		eResponseMessage_requestModeReject,
-		eResponseMessage_roundTripDelayResponse,
-		eResponseMessage_maintenanceLoopAck,
-		eResponseMessage_maintenanceLoopReject,
-		eResponseMessage_communicationModeResponse,
-		eResponseMessage_conferenceResponse,
-		eResponseMessage_multilinkResponse,
-		eResponseMessage_logicalChannelRateAcknowledge,
-		eResponseMessage_logicalChannelRateReject,
-	} choice;
-	union {
-		OpenLogicalChannelAck openLogicalChannelAck;
-	};
-} ResponseMessage;
-
-typedef struct MultimediaSystemControlMessage {	/* CHOICE */
-	enum {
-		eMultimediaSystemControlMessage_request,
-		eMultimediaSystemControlMessage_response,
-		eMultimediaSystemControlMessage_command,
-		eMultimediaSystemControlMessage_indication,
-	} choice;
-	union {
-		RequestMessage request;
-		ResponseMessage response;
-	};
-} MultimediaSystemControlMessage;
-
-typedef struct H323_UU_PDU_h245Control {	/* SEQUENCE OF */
-	int count;
-	MultimediaSystemControlMessage item[4];
-} H323_UU_PDU_h245Control;
-
-typedef struct H323_UU_PDU {	/* SEQUENCE */
-	enum {
-		eH323_UU_PDU_nonStandardData = (1 << 31),
-		eH323_UU_PDU_h4501SupplementaryService = (1 << 30),
-		eH323_UU_PDU_h245Tunneling = (1 << 29),
-		eH323_UU_PDU_h245Control = (1 << 28),
-		eH323_UU_PDU_nonStandardControl = (1 << 27),
-		eH323_UU_PDU_callLinkage = (1 << 26),
-		eH323_UU_PDU_tunnelledSignallingMessage = (1 << 25),
-		eH323_UU_PDU_provisionalRespToH245Tunneling = (1 << 24),
-		eH323_UU_PDU_stimulusControl = (1 << 23),
-		eH323_UU_PDU_genericData = (1 << 22),
-	} options;
-	H323_UU_PDU_h323_message_body h323_message_body;
-	H323_UU_PDU_h245Control h245Control;
-} H323_UU_PDU;
-
-typedef struct H323_UserInformation {	/* SEQUENCE */
-	enum {
-		eH323_UserInformation_user_data = (1 << 31),
-	} options;
-	H323_UU_PDU h323_uu_pdu;
-} H323_UserInformation;
-
-typedef struct GatekeeperRequest {	/* SEQUENCE */
-	enum {
-		eGatekeeperRequest_nonStandardData = (1 << 31),
-		eGatekeeperRequest_gatekeeperIdentifier = (1 << 30),
-		eGatekeeperRequest_callServices = (1 << 29),
-		eGatekeeperRequest_endpointAlias = (1 << 28),
-		eGatekeeperRequest_alternateEndpoints = (1 << 27),
-		eGatekeeperRequest_tokens = (1 << 26),
-		eGatekeeperRequest_cryptoTokens = (1 << 25),
-		eGatekeeperRequest_authenticationCapability = (1 << 24),
-		eGatekeeperRequest_algorithmOIDs = (1 << 23),
-		eGatekeeperRequest_integrity = (1 << 22),
-		eGatekeeperRequest_integrityCheckValue = (1 << 21),
-		eGatekeeperRequest_supportsAltGK = (1 << 20),
-		eGatekeeperRequest_featureSet = (1 << 19),
-		eGatekeeperRequest_genericData = (1 << 18),
-	} options;
-	TransportAddress rasAddress;
-} GatekeeperRequest;
-
-typedef struct GatekeeperConfirm {	/* SEQUENCE */
-	enum {
-		eGatekeeperConfirm_nonStandardData = (1 << 31),
-		eGatekeeperConfirm_gatekeeperIdentifier = (1 << 30),
-		eGatekeeperConfirm_alternateGatekeeper = (1 << 29),
-		eGatekeeperConfirm_authenticationMode = (1 << 28),
-		eGatekeeperConfirm_tokens = (1 << 27),
-		eGatekeeperConfirm_cryptoTokens = (1 << 26),
-		eGatekeeperConfirm_algorithmOID = (1 << 25),
-		eGatekeeperConfirm_integrity = (1 << 24),
-		eGatekeeperConfirm_integrityCheckValue = (1 << 23),
-		eGatekeeperConfirm_featureSet = (1 << 22),
-		eGatekeeperConfirm_genericData = (1 << 21),
-	} options;
-	TransportAddress rasAddress;
-} GatekeeperConfirm;
-
-typedef struct RegistrationRequest_callSignalAddress {	/* SEQUENCE OF */
-	int count;
-	TransportAddress item[10];
-} RegistrationRequest_callSignalAddress;
-
-typedef struct RegistrationRequest_rasAddress {	/* SEQUENCE OF */
-	int count;
-	TransportAddress item[10];
-} RegistrationRequest_rasAddress;
-
-typedef struct RegistrationRequest {	/* SEQUENCE */
-	enum {
-		eRegistrationRequest_nonStandardData = (1 << 31),
-		eRegistrationRequest_terminalAlias = (1 << 30),
-		eRegistrationRequest_gatekeeperIdentifier = (1 << 29),
-		eRegistrationRequest_alternateEndpoints = (1 << 28),
-		eRegistrationRequest_timeToLive = (1 << 27),
-		eRegistrationRequest_tokens = (1 << 26),
-		eRegistrationRequest_cryptoTokens = (1 << 25),
-		eRegistrationRequest_integrityCheckValue = (1 << 24),
-		eRegistrationRequest_keepAlive = (1 << 23),
-		eRegistrationRequest_endpointIdentifier = (1 << 22),
-		eRegistrationRequest_willSupplyUUIEs = (1 << 21),
-		eRegistrationRequest_maintainConnection = (1 << 20),
-		eRegistrationRequest_alternateTransportAddresses = (1 << 19),
-		eRegistrationRequest_additiveRegistration = (1 << 18),
-		eRegistrationRequest_terminalAliasPattern = (1 << 17),
-		eRegistrationRequest_supportsAltGK = (1 << 16),
-		eRegistrationRequest_usageReportingCapability = (1 << 15),
-		eRegistrationRequest_multipleCalls = (1 << 14),
-		eRegistrationRequest_supportedH248Packages = (1 << 13),
-		eRegistrationRequest_callCreditCapability = (1 << 12),
-		eRegistrationRequest_capacityReportingCapability = (1 << 11),
-		eRegistrationRequest_capacity = (1 << 10),
-		eRegistrationRequest_featureSet = (1 << 9),
-		eRegistrationRequest_genericData = (1 << 8),
-	} options;
-	RegistrationRequest_callSignalAddress callSignalAddress;
-	RegistrationRequest_rasAddress rasAddress;
-	unsigned timeToLive;
-} RegistrationRequest;
-
-typedef struct RegistrationConfirm_callSignalAddress {	/* SEQUENCE OF */
-	int count;
-	TransportAddress item[10];
-} RegistrationConfirm_callSignalAddress;
-
-typedef struct RegistrationConfirm {	/* SEQUENCE */
-	enum {
-		eRegistrationConfirm_nonStandardData = (1 << 31),
-		eRegistrationConfirm_terminalAlias = (1 << 30),
-		eRegistrationConfirm_gatekeeperIdentifier = (1 << 29),
-		eRegistrationConfirm_alternateGatekeeper = (1 << 28),
-		eRegistrationConfirm_timeToLive = (1 << 27),
-		eRegistrationConfirm_tokens = (1 << 26),
-		eRegistrationConfirm_cryptoTokens = (1 << 25),
-		eRegistrationConfirm_integrityCheckValue = (1 << 24),
-		eRegistrationConfirm_willRespondToIRR = (1 << 23),
-		eRegistrationConfirm_preGrantedARQ = (1 << 22),
-		eRegistrationConfirm_maintainConnection = (1 << 21),
-		eRegistrationConfirm_serviceControl = (1 << 20),
-		eRegistrationConfirm_supportsAdditiveRegistration = (1 << 19),
-		eRegistrationConfirm_terminalAliasPattern = (1 << 18),
-		eRegistrationConfirm_supportedPrefixes = (1 << 17),
-		eRegistrationConfirm_usageSpec = (1 << 16),
-		eRegistrationConfirm_featureServerAlias = (1 << 15),
-		eRegistrationConfirm_capacityReportingSpec = (1 << 14),
-		eRegistrationConfirm_featureSet = (1 << 13),
-		eRegistrationConfirm_genericData = (1 << 12),
-	} options;
-	RegistrationConfirm_callSignalAddress callSignalAddress;
-	unsigned timeToLive;
-} RegistrationConfirm;
-
-typedef struct UnregistrationRequest_callSignalAddress {	/* SEQUENCE OF */
-	int count;
-	TransportAddress item[10];
-} UnregistrationRequest_callSignalAddress;
-
-typedef struct UnregistrationRequest {	/* SEQUENCE */
-	enum {
-		eUnregistrationRequest_endpointAlias = (1 << 31),
-		eUnregistrationRequest_nonStandardData = (1 << 30),
-		eUnregistrationRequest_endpointIdentifier = (1 << 29),
-		eUnregistrationRequest_alternateEndpoints = (1 << 28),
-		eUnregistrationRequest_gatekeeperIdentifier = (1 << 27),
-		eUnregistrationRequest_tokens = (1 << 26),
-		eUnregistrationRequest_cryptoTokens = (1 << 25),
-		eUnregistrationRequest_integrityCheckValue = (1 << 24),
-		eUnregistrationRequest_reason = (1 << 23),
-		eUnregistrationRequest_endpointAliasPattern = (1 << 22),
-		eUnregistrationRequest_supportedPrefixes = (1 << 21),
-		eUnregistrationRequest_alternateGatekeeper = (1 << 20),
-		eUnregistrationRequest_genericData = (1 << 19),
-	} options;
-	UnregistrationRequest_callSignalAddress callSignalAddress;
-} UnregistrationRequest;
-
-typedef struct AdmissionRequest {	/* SEQUENCE */
-	enum {
-		eAdmissionRequest_callModel = (1 << 31),
-		eAdmissionRequest_destinationInfo = (1 << 30),
-		eAdmissionRequest_destCallSignalAddress = (1 << 29),
-		eAdmissionRequest_destExtraCallInfo = (1 << 28),
-		eAdmissionRequest_srcCallSignalAddress = (1 << 27),
-		eAdmissionRequest_nonStandardData = (1 << 26),
-		eAdmissionRequest_callServices = (1 << 25),
-		eAdmissionRequest_canMapAlias = (1 << 24),
-		eAdmissionRequest_callIdentifier = (1 << 23),
-		eAdmissionRequest_srcAlternatives = (1 << 22),
-		eAdmissionRequest_destAlternatives = (1 << 21),
-		eAdmissionRequest_gatekeeperIdentifier = (1 << 20),
-		eAdmissionRequest_tokens = (1 << 19),
-		eAdmissionRequest_cryptoTokens = (1 << 18),
-		eAdmissionRequest_integrityCheckValue = (1 << 17),
-		eAdmissionRequest_transportQOS = (1 << 16),
-		eAdmissionRequest_willSupplyUUIEs = (1 << 15),
-		eAdmissionRequest_callLinkage = (1 << 14),
-		eAdmissionRequest_gatewayDataRate = (1 << 13),
-		eAdmissionRequest_capacity = (1 << 12),
-		eAdmissionRequest_circuitInfo = (1 << 11),
-		eAdmissionRequest_desiredProtocols = (1 << 10),
-		eAdmissionRequest_desiredTunnelledProtocol = (1 << 9),
-		eAdmissionRequest_featureSet = (1 << 8),
-		eAdmissionRequest_genericData = (1 << 7),
-	} options;
-	TransportAddress destCallSignalAddress;
-	TransportAddress srcCallSignalAddress;
-} AdmissionRequest;
-
-typedef struct AdmissionConfirm {	/* SEQUENCE */
-	enum {
-		eAdmissionConfirm_irrFrequency = (1 << 31),
-		eAdmissionConfirm_nonStandardData = (1 << 30),
-		eAdmissionConfirm_destinationInfo = (1 << 29),
-		eAdmissionConfirm_destExtraCallInfo = (1 << 28),
-		eAdmissionConfirm_destinationType = (1 << 27),
-		eAdmissionConfirm_remoteExtensionAddress = (1 << 26),
-		eAdmissionConfirm_alternateEndpoints = (1 << 25),
-		eAdmissionConfirm_tokens = (1 << 24),
-		eAdmissionConfirm_cryptoTokens = (1 << 23),
-		eAdmissionConfirm_integrityCheckValue = (1 << 22),
-		eAdmissionConfirm_transportQOS = (1 << 21),
-		eAdmissionConfirm_willRespondToIRR = (1 << 20),
-		eAdmissionConfirm_uuiesRequested = (1 << 19),
-		eAdmissionConfirm_language = (1 << 18),
-		eAdmissionConfirm_alternateTransportAddresses = (1 << 17),
-		eAdmissionConfirm_useSpecifiedTransport = (1 << 16),
-		eAdmissionConfirm_circuitInfo = (1 << 15),
-		eAdmissionConfirm_usageSpec = (1 << 14),
-		eAdmissionConfirm_supportedProtocols = (1 << 13),
-		eAdmissionConfirm_serviceControl = (1 << 12),
-		eAdmissionConfirm_multipleCalls = (1 << 11),
-		eAdmissionConfirm_featureSet = (1 << 10),
-		eAdmissionConfirm_genericData = (1 << 9),
-	} options;
-	TransportAddress destCallSignalAddress;
-} AdmissionConfirm;
-
-typedef struct LocationRequest {	/* SEQUENCE */
-	enum {
-		eLocationRequest_endpointIdentifier = (1 << 31),
-		eLocationRequest_nonStandardData = (1 << 30),
-		eLocationRequest_sourceInfo = (1 << 29),
-		eLocationRequest_canMapAlias = (1 << 28),
-		eLocationRequest_gatekeeperIdentifier = (1 << 27),
-		eLocationRequest_tokens = (1 << 26),
-		eLocationRequest_cryptoTokens = (1 << 25),
-		eLocationRequest_integrityCheckValue = (1 << 24),
-		eLocationRequest_desiredProtocols = (1 << 23),
-		eLocationRequest_desiredTunnelledProtocol = (1 << 22),
-		eLocationRequest_featureSet = (1 << 21),
-		eLocationRequest_genericData = (1 << 20),
-		eLocationRequest_hopCount = (1 << 19),
-		eLocationRequest_circuitInfo = (1 << 18),
-	} options;
-	TransportAddress replyAddress;
-} LocationRequest;
-
-typedef struct LocationConfirm {	/* SEQUENCE */
-	enum {
-		eLocationConfirm_nonStandardData = (1 << 31),
-		eLocationConfirm_destinationInfo = (1 << 30),
-		eLocationConfirm_destExtraCallInfo = (1 << 29),
-		eLocationConfirm_destinationType = (1 << 28),
-		eLocationConfirm_remoteExtensionAddress = (1 << 27),
-		eLocationConfirm_alternateEndpoints = (1 << 26),
-		eLocationConfirm_tokens = (1 << 25),
-		eLocationConfirm_cryptoTokens = (1 << 24),
-		eLocationConfirm_integrityCheckValue = (1 << 23),
-		eLocationConfirm_alternateTransportAddresses = (1 << 22),
-		eLocationConfirm_supportedProtocols = (1 << 21),
-		eLocationConfirm_multipleCalls = (1 << 20),
-		eLocationConfirm_featureSet = (1 << 19),
-		eLocationConfirm_genericData = (1 << 18),
-		eLocationConfirm_circuitInfo = (1 << 17),
-		eLocationConfirm_serviceControl = (1 << 16),
-	} options;
-	TransportAddress callSignalAddress;
-	TransportAddress rasAddress;
-} LocationConfirm;
-
-typedef struct InfoRequestResponse_callSignalAddress {	/* SEQUENCE OF */
-	int count;
-	TransportAddress item[10];
-} InfoRequestResponse_callSignalAddress;
-
-typedef struct InfoRequestResponse {	/* SEQUENCE */
-	enum {
-		eInfoRequestResponse_nonStandardData = (1 << 31),
-		eInfoRequestResponse_endpointAlias = (1 << 30),
-		eInfoRequestResponse_perCallInfo = (1 << 29),
-		eInfoRequestResponse_tokens = (1 << 28),
-		eInfoRequestResponse_cryptoTokens = (1 << 27),
-		eInfoRequestResponse_integrityCheckValue = (1 << 26),
-		eInfoRequestResponse_needResponse = (1 << 25),
-		eInfoRequestResponse_capacity = (1 << 24),
-		eInfoRequestResponse_irrStatus = (1 << 23),
-		eInfoRequestResponse_unsolicited = (1 << 22),
-		eInfoRequestResponse_genericData = (1 << 21),
-	} options;
-	TransportAddress rasAddress;
-	InfoRequestResponse_callSignalAddress callSignalAddress;
-} InfoRequestResponse;
-
-typedef struct RasMessage {	/* CHOICE */
-	enum {
-		eRasMessage_gatekeeperRequest,
-		eRasMessage_gatekeeperConfirm,
-		eRasMessage_gatekeeperReject,
-		eRasMessage_registrationRequest,
-		eRasMessage_registrationConfirm,
-		eRasMessage_registrationReject,
-		eRasMessage_unregistrationRequest,
-		eRasMessage_unregistrationConfirm,
-		eRasMessage_unregistrationReject,
-		eRasMessage_admissionRequest,
-		eRasMessage_admissionConfirm,
-		eRasMessage_admissionReject,
-		eRasMessage_bandwidthRequest,
-		eRasMessage_bandwidthConfirm,
-		eRasMessage_bandwidthReject,
-		eRasMessage_disengageRequest,
-		eRasMessage_disengageConfirm,
-		eRasMessage_disengageReject,
-		eRasMessage_locationRequest,
-		eRasMessage_locationConfirm,
-		eRasMessage_locationReject,
-		eRasMessage_infoRequest,
-		eRasMessage_infoRequestResponse,
-		eRasMessage_nonStandardMessage,
-		eRasMessage_unknownMessageResponse,
-		eRasMessage_requestInProgress,
-		eRasMessage_resourcesAvailableIndicate,
-		eRasMessage_resourcesAvailableConfirm,
-		eRasMessage_infoRequestAck,
-		eRasMessage_infoRequestNak,
-		eRasMessage_serviceControlIndication,
-		eRasMessage_serviceControlResponse,
-	} choice;
-	union {
-		GatekeeperRequest gatekeeperRequest;
-		GatekeeperConfirm gatekeeperConfirm;
-		RegistrationRequest registrationRequest;
-		RegistrationConfirm registrationConfirm;
-		UnregistrationRequest unregistrationRequest;
-		AdmissionRequest admissionRequest;
-		AdmissionConfirm admissionConfirm;
-		LocationRequest locationRequest;
-		LocationConfirm locationConfirm;
-		InfoRequestResponse infoRequestResponse;
-	};
-} RasMessage;
diff --git a/ANDROID_3.4.5/include/linux/netfilter/nf_conntrack_irc.h b/ANDROID_3.4.5/include/linux/netfilter/nf_conntrack_irc.h
deleted file mode 100644
index 36282bf7..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter/nf_conntrack_irc.h
+++ /dev/null
@@ -1,15 +0,0 @@
-#ifndef _NF_CONNTRACK_IRC_H
-#define _NF_CONNTRACK_IRC_H
-
-#ifdef __KERNEL__
-
-#define IRC_PORT	6667
-
-extern unsigned int (*nf_nat_irc_hook)(struct sk_buff *skb,
-				       enum ip_conntrack_info ctinfo,
-				       unsigned int matchoff,
-				       unsigned int matchlen,
-				       struct nf_conntrack_expect *exp);
-
-#endif /* __KERNEL__ */
-#endif /* _NF_CONNTRACK_IRC_H */
diff --git a/ANDROID_3.4.5/include/linux/netfilter/nf_conntrack_pptp.h b/ANDROID_3.4.5/include/linux/netfilter/nf_conntrack_pptp.h
deleted file mode 100644
index 3bbde0c3..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter/nf_conntrack_pptp.h
+++ /dev/null
@@ -1,324 +0,0 @@
-/* PPTP constants and structs */
-#ifndef _NF_CONNTRACK_PPTP_H
-#define _NF_CONNTRACK_PPTP_H
-
-#include <linux/netfilter/nf_conntrack_common.h>
-
-extern const char *const pptp_msg_name[];
-
-/* state of the control session */
-enum pptp_ctrlsess_state {
-	PPTP_SESSION_NONE,			/* no session present */
-	PPTP_SESSION_ERROR,			/* some session error */
-	PPTP_SESSION_STOPREQ,			/* stop_sess request seen */
-	PPTP_SESSION_REQUESTED,			/* start_sess request seen */
-	PPTP_SESSION_CONFIRMED,			/* session established */
-};
-
-/* state of the call inside the control session */
-enum pptp_ctrlcall_state {
-	PPTP_CALL_NONE,
-	PPTP_CALL_ERROR,
-	PPTP_CALL_OUT_REQ,
-	PPTP_CALL_OUT_CONF,
-	PPTP_CALL_IN_REQ,
-	PPTP_CALL_IN_REP,
-	PPTP_CALL_IN_CONF,
-	PPTP_CALL_CLEAR_REQ,
-};
-
-/* conntrack private data */
-struct nf_ct_pptp_master {
-	enum pptp_ctrlsess_state sstate;	/* session state */
-	enum pptp_ctrlcall_state cstate;	/* call state */
-	__be16 pac_call_id;			/* call id of PAC */
-	__be16 pns_call_id;			/* call id of PNS */
-
-	/* in pre-2.6.11 this used to be per-expect. Now it is per-conntrack
-	 * and therefore imposes a fixed limit on the number of maps */
-	struct nf_ct_gre_keymap *keymap[IP_CT_DIR_MAX];
-};
-
-struct nf_nat_pptp {
-	__be16 pns_call_id;			/* NAT'ed PNS call id */
-	__be16 pac_call_id;			/* NAT'ed PAC call id */
-};
-
-#ifdef __KERNEL__
-
-#define PPTP_CONTROL_PORT	1723
-
-#define PPTP_PACKET_CONTROL	1
-#define PPTP_PACKET_MGMT	2
-
-#define PPTP_MAGIC_COOKIE	0x1a2b3c4d
-
-struct pptp_pkt_hdr {
-	__u16	packetLength;
-	__be16	packetType;
-	__be32	magicCookie;
-};
-
-/* PptpControlMessageType values */
-#define PPTP_START_SESSION_REQUEST	1
-#define PPTP_START_SESSION_REPLY	2
-#define PPTP_STOP_SESSION_REQUEST	3
-#define PPTP_STOP_SESSION_REPLY		4
-#define PPTP_ECHO_REQUEST		5
-#define PPTP_ECHO_REPLY			6
-#define PPTP_OUT_CALL_REQUEST		7
-#define PPTP_OUT_CALL_REPLY		8
-#define PPTP_IN_CALL_REQUEST		9
-#define PPTP_IN_CALL_REPLY		10
-#define PPTP_IN_CALL_CONNECT		11
-#define PPTP_CALL_CLEAR_REQUEST		12
-#define PPTP_CALL_DISCONNECT_NOTIFY	13
-#define PPTP_WAN_ERROR_NOTIFY		14
-#define PPTP_SET_LINK_INFO		15
-
-#define PPTP_MSG_MAX			15
-
-/* PptpGeneralError values */
-#define PPTP_ERROR_CODE_NONE		0
-#define PPTP_NOT_CONNECTED		1
-#define PPTP_BAD_FORMAT			2
-#define PPTP_BAD_VALUE			3
-#define PPTP_NO_RESOURCE		4
-#define PPTP_BAD_CALLID			5
-#define PPTP_REMOVE_DEVICE_ERROR	6
-
-struct PptpControlHeader {
-	__be16	messageType;
-	__u16	reserved;
-};
-
-/* FramingCapability Bitmap Values */
-#define PPTP_FRAME_CAP_ASYNC		0x1
-#define PPTP_FRAME_CAP_SYNC		0x2
-
-/* BearerCapability Bitmap Values */
-#define PPTP_BEARER_CAP_ANALOG		0x1
-#define PPTP_BEARER_CAP_DIGITAL		0x2
-
-struct PptpStartSessionRequest {
-	__be16	protocolVersion;
-	__u16	reserved1;
-	__be32	framingCapability;
-	__be32	bearerCapability;
-	__be16	maxChannels;
-	__be16	firmwareRevision;
-	__u8	hostName[64];
-	__u8	vendorString[64];
-};
-
-/* PptpStartSessionResultCode Values */
-#define PPTP_START_OK			1
-#define PPTP_START_GENERAL_ERROR	2
-#define PPTP_START_ALREADY_CONNECTED	3
-#define PPTP_START_NOT_AUTHORIZED	4
-#define PPTP_START_UNKNOWN_PROTOCOL	5
-
-struct PptpStartSessionReply {
-	__be16	protocolVersion;
-	__u8	resultCode;
-	__u8	generalErrorCode;
-	__be32	framingCapability;
-	__be32	bearerCapability;
-	__be16	maxChannels;
-	__be16	firmwareRevision;
-	__u8	hostName[64];
-	__u8	vendorString[64];
-};
-
-/* PptpStopReasons */
-#define PPTP_STOP_NONE			1
-#define PPTP_STOP_PROTOCOL		2
-#define PPTP_STOP_LOCAL_SHUTDOWN	3
-
-struct PptpStopSessionRequest {
-	__u8	reason;
-	__u8	reserved1;
-	__u16	reserved2;
-};
-
-/* PptpStopSessionResultCode */
-#define PPTP_STOP_OK			1
-#define PPTP_STOP_GENERAL_ERROR		2
-
-struct PptpStopSessionReply {
-	__u8	resultCode;
-	__u8	generalErrorCode;
-	__u16	reserved1;
-};
-
-struct PptpEchoRequest {
-	__be32 identNumber;
-};
-
-/* PptpEchoReplyResultCode */
-#define PPTP_ECHO_OK			1
-#define PPTP_ECHO_GENERAL_ERROR		2
-
-struct PptpEchoReply {
-	__be32	identNumber;
-	__u8	resultCode;
-	__u8	generalErrorCode;
-	__u16	reserved;
-};
-
-/* PptpFramingType */
-#define PPTP_ASYNC_FRAMING		1
-#define PPTP_SYNC_FRAMING		2
-#define PPTP_DONT_CARE_FRAMING		3
-
-/* PptpCallBearerType */
-#define PPTP_ANALOG_TYPE		1
-#define PPTP_DIGITAL_TYPE		2
-#define PPTP_DONT_CARE_BEARER_TYPE	3
-
-struct PptpOutCallRequest {
-	__be16	callID;
-	__be16	callSerialNumber;
-	__be32	minBPS;
-	__be32	maxBPS;
-	__be32	bearerType;
-	__be32	framingType;
-	__be16	packetWindow;
-	__be16	packetProcDelay;
-	__be16	phoneNumberLength;
-	__u16	reserved1;
-	__u8	phoneNumber[64];
-	__u8	subAddress[64];
-};
-
-/* PptpCallResultCode */
-#define PPTP_OUTCALL_CONNECT		1
-#define PPTP_OUTCALL_GENERAL_ERROR	2
-#define PPTP_OUTCALL_NO_CARRIER		3
-#define PPTP_OUTCALL_BUSY		4
-#define PPTP_OUTCALL_NO_DIAL_TONE	5
-#define PPTP_OUTCALL_TIMEOUT		6
-#define PPTP_OUTCALL_DONT_ACCEPT	7
-
-struct PptpOutCallReply {
-	__be16	callID;
-	__be16	peersCallID;
-	__u8	resultCode;
-	__u8	generalErrorCode;
-	__be16	causeCode;
-	__be32	connectSpeed;
-	__be16	packetWindow;
-	__be16	packetProcDelay;
-	__be32	physChannelID;
-};
-
-struct PptpInCallRequest {
-	__be16	callID;
-	__be16	callSerialNumber;
-	__be32	callBearerType;
-	__be32	physChannelID;
-	__be16	dialedNumberLength;
-	__be16	dialingNumberLength;
-	__u8	dialedNumber[64];
-	__u8	dialingNumber[64];
-	__u8	subAddress[64];
-};
-
-/* PptpInCallResultCode */
-#define PPTP_INCALL_ACCEPT		1
-#define PPTP_INCALL_GENERAL_ERROR	2
-#define PPTP_INCALL_DONT_ACCEPT		3
-
-struct PptpInCallReply {
-	__be16	callID;
-	__be16	peersCallID;
-	__u8	resultCode;
-	__u8	generalErrorCode;
-	__be16	packetWindow;
-	__be16	packetProcDelay;
-	__u16	reserved;
-};
-
-struct PptpInCallConnected {
-	__be16	peersCallID;
-	__u16	reserved;
-	__be32	connectSpeed;
-	__be16	packetWindow;
-	__be16	packetProcDelay;
-	__be32	callFramingType;
-};
-
-struct PptpClearCallRequest {
-	__be16	callID;
-	__u16	reserved;
-};
-
-struct PptpCallDisconnectNotify {
-	__be16	callID;
-	__u8	resultCode;
-	__u8	generalErrorCode;
-	__be16	causeCode;
-	__u16	reserved;
-	__u8	callStatistics[128];
-};
-
-struct PptpWanErrorNotify {
-	__be16	peersCallID;
-	__u16	reserved;
-	__be32	crcErrors;
-	__be32	framingErrors;
-	__be32	hardwareOverRuns;
-	__be32	bufferOverRuns;
-	__be32	timeoutErrors;
-	__be32	alignmentErrors;
-};
-
-struct PptpSetLinkInfo {
-	__be16	peersCallID;
-	__u16	reserved;
-	__be32	sendAccm;
-	__be32	recvAccm;
-};
-
-union pptp_ctrl_union {
-	struct PptpStartSessionRequest	sreq;
-	struct PptpStartSessionReply	srep;
-	struct PptpStopSessionRequest	streq;
-	struct PptpStopSessionReply	strep;
-	struct PptpOutCallRequest	ocreq;
-	struct PptpOutCallReply		ocack;
-	struct PptpInCallRequest	icreq;
-	struct PptpInCallReply		icack;
-	struct PptpInCallConnected	iccon;
-	struct PptpClearCallRequest	clrreq;
-	struct PptpCallDisconnectNotify disc;
-	struct PptpWanErrorNotify	wanerr;
-	struct PptpSetLinkInfo		setlink;
-};
-
-/* crap needed for nf_conntrack_compat.h */
-struct nf_conn;
-struct nf_conntrack_expect;
-
-extern int
-(*nf_nat_pptp_hook_outbound)(struct sk_buff *skb,
-			     struct nf_conn *ct, enum ip_conntrack_info ctinfo,
-			     struct PptpControlHeader *ctlh,
-			     union pptp_ctrl_union *pptpReq);
-
-extern int
-(*nf_nat_pptp_hook_inbound)(struct sk_buff *skb,
-			    struct nf_conn *ct, enum ip_conntrack_info ctinfo,
-			    struct PptpControlHeader *ctlh,
-			    union pptp_ctrl_union *pptpReq);
-
-extern void
-(*nf_nat_pptp_hook_exp_gre)(struct nf_conntrack_expect *exp_orig,
-			    struct nf_conntrack_expect *exp_reply);
-
-extern void
-(*nf_nat_pptp_hook_expectfn)(struct nf_conn *ct,
-			     struct nf_conntrack_expect *exp);
-
-#endif /* __KERNEL__ */
-#endif /* _NF_CONNTRACK_PPTP_H */
diff --git a/ANDROID_3.4.5/include/linux/netfilter/nf_conntrack_proto_gre.h b/ANDROID_3.4.5/include/linux/netfilter/nf_conntrack_proto_gre.h
deleted file mode 100644
index 6a0664c0..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter/nf_conntrack_proto_gre.h
+++ /dev/null
@@ -1,94 +0,0 @@
-#ifndef _CONNTRACK_PROTO_GRE_H
-#define _CONNTRACK_PROTO_GRE_H
-#include <asm/byteorder.h>
-
-/* GRE PROTOCOL HEADER */
-
-/* GRE Version field */
-#define GRE_VERSION_1701	0x0
-#define GRE_VERSION_PPTP	0x1
-
-/* GRE Protocol field */
-#define GRE_PROTOCOL_PPTP	0x880B
-
-/* GRE Flags */
-#define GRE_FLAG_C		0x80
-#define GRE_FLAG_R		0x40
-#define GRE_FLAG_K		0x20
-#define GRE_FLAG_S		0x10
-#define GRE_FLAG_A		0x80
-
-#define GRE_IS_C(f)	((f)&GRE_FLAG_C)
-#define GRE_IS_R(f)	((f)&GRE_FLAG_R)
-#define GRE_IS_K(f)	((f)&GRE_FLAG_K)
-#define GRE_IS_S(f)	((f)&GRE_FLAG_S)
-#define GRE_IS_A(f)	((f)&GRE_FLAG_A)
-
-/* GRE is a mess: Four different standards */
-struct gre_hdr {
-#if defined(__LITTLE_ENDIAN_BITFIELD)
-	__u16	rec:3,
-		srr:1,
-		seq:1,
-		key:1,
-		routing:1,
-		csum:1,
-		version:3,
-		reserved:4,
-		ack:1;
-#elif defined(__BIG_ENDIAN_BITFIELD)
-	__u16	csum:1,
-		routing:1,
-		key:1,
-		seq:1,
-		srr:1,
-		rec:3,
-		ack:1,
-		reserved:4,
-		version:3;
-#else
-#error "Adjust your <asm/byteorder.h> defines"
-#endif
-	__be16	protocol;
-};
-
-/* modified GRE header for PPTP */
-struct gre_hdr_pptp {
-	__u8   flags;		/* bitfield */
-	__u8   version;		/* should be GRE_VERSION_PPTP */
-	__be16 protocol;	/* should be GRE_PROTOCOL_PPTP */
-	__be16 payload_len;	/* size of ppp payload, not inc. gre header */
-	__be16 call_id;		/* peer's call_id for this session */
-	__be32 seq;		/* sequence number.  Present if S==1 */
-	__be32 ack;		/* seq number of highest packet received by */
-				/*  sender in this session */
-};
-
-struct nf_ct_gre {
-	unsigned int stream_timeout;
-	unsigned int timeout;
-};
-
-#ifdef __KERNEL__
-#include <net/netfilter/nf_conntrack_tuple.h>
-
-struct nf_conn;
-
-/* structure for original <-> reply keymap */
-struct nf_ct_gre_keymap {
-	struct list_head list;
-	struct nf_conntrack_tuple tuple;
-};
-
-/* add new tuple->key_reply pair to keymap */
-int nf_ct_gre_keymap_add(struct nf_conn *ct, enum ip_conntrack_dir dir,
-			 struct nf_conntrack_tuple *t);
-
-/* delete keymap entries */
-void nf_ct_gre_keymap_destroy(struct nf_conn *ct);
-
-extern void nf_ct_gre_keymap_flush(struct net *net);
-extern void nf_nat_need_gre(void);
-
-#endif /* __KERNEL__ */
-#endif /* _CONNTRACK_PROTO_GRE_H */
diff --git a/ANDROID_3.4.5/include/linux/netfilter/nf_conntrack_sane.h b/ANDROID_3.4.5/include/linux/netfilter/nf_conntrack_sane.h
deleted file mode 100644
index 4767d6e2..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter/nf_conntrack_sane.h
+++ /dev/null
@@ -1,21 +0,0 @@
-#ifndef _NF_CONNTRACK_SANE_H
-#define _NF_CONNTRACK_SANE_H
-/* SANE tracking. */
-
-#ifdef __KERNEL__
-
-#define SANE_PORT	6566
-
-enum sane_state {
-	SANE_STATE_NORMAL,
-	SANE_STATE_START_REQUESTED,
-};
-
-/* This structure exists only once per master */
-struct nf_ct_sane_master {
-	enum sane_state state;
-};
-
-#endif /* __KERNEL__ */
-
-#endif /* _NF_CONNTRACK_SANE_H */
diff --git a/ANDROID_3.4.5/include/linux/netfilter/nf_conntrack_sctp.h b/ANDROID_3.4.5/include/linux/netfilter/nf_conntrack_sctp.h
deleted file mode 100644
index ceeefe66..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter/nf_conntrack_sctp.h
+++ /dev/null
@@ -1,25 +0,0 @@
-#ifndef _NF_CONNTRACK_SCTP_H
-#define _NF_CONNTRACK_SCTP_H
-/* SCTP tracking. */
-
-#include <linux/netfilter/nf_conntrack_tuple_common.h>
-
-enum sctp_conntrack {
-	SCTP_CONNTRACK_NONE,
-	SCTP_CONNTRACK_CLOSED,
-	SCTP_CONNTRACK_COOKIE_WAIT,
-	SCTP_CONNTRACK_COOKIE_ECHOED,
-	SCTP_CONNTRACK_ESTABLISHED,
-	SCTP_CONNTRACK_SHUTDOWN_SENT,
-	SCTP_CONNTRACK_SHUTDOWN_RECD,
-	SCTP_CONNTRACK_SHUTDOWN_ACK_SENT,
-	SCTP_CONNTRACK_MAX
-};
-
-struct ip_ct_sctp {
-	enum sctp_conntrack state;
-
-	__be32 vtag[IP_CT_DIR_MAX];
-};
-
-#endif /* _NF_CONNTRACK_SCTP_H */
diff --git a/ANDROID_3.4.5/include/linux/netfilter/nf_conntrack_sip.h b/ANDROID_3.4.5/include/linux/netfilter/nf_conntrack_sip.h
deleted file mode 100644
index 0ce91d56..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter/nf_conntrack_sip.h
+++ /dev/null
@@ -1,179 +0,0 @@
-#ifndef __NF_CONNTRACK_SIP_H__
-#define __NF_CONNTRACK_SIP_H__
-#ifdef __KERNEL__
-
-#define SIP_PORT	5060
-#define SIP_TIMEOUT	3600
-
-struct nf_ct_sip_master {
-	unsigned int	register_cseq;
-	unsigned int	invite_cseq;
-};
-
-enum sip_expectation_classes {
-	SIP_EXPECT_SIGNALLING,
-	SIP_EXPECT_AUDIO,
-	SIP_EXPECT_VIDEO,
-	SIP_EXPECT_IMAGE,
-	__SIP_EXPECT_MAX
-};
-#define SIP_EXPECT_MAX	(__SIP_EXPECT_MAX - 1)
-
-struct sdp_media_type {
-	const char			*name;
-	unsigned int			len;
-	enum sip_expectation_classes	class;
-};
-
-#define SDP_MEDIA_TYPE(__name, __class)					\
-{									\
-	.name	= (__name),						\
-	.len	= sizeof(__name) - 1,					\
-	.class	= (__class),						\
-}
-
-struct sip_handler {
-	const char	*method;
-	unsigned int	len;
-	int		(*request)(struct sk_buff *skb, unsigned int dataoff,
-				   const char **dptr, unsigned int *datalen,
-				   unsigned int cseq);
-	int		(*response)(struct sk_buff *skb, unsigned int dataoff,
-				    const char **dptr, unsigned int *datalen,
-				    unsigned int cseq, unsigned int code);
-};
-
-#define SIP_HANDLER(__method, __request, __response)			\
-{									\
-	.method		= (__method),					\
-	.len		= sizeof(__method) - 1,				\
-	.request	= (__request),					\
-	.response	= (__response),					\
-}
-
-struct sip_header {
-	const char	*name;
-	const char	*cname;
-	const char	*search;
-	unsigned int	len;
-	unsigned int	clen;
-	unsigned int	slen;
-	int		(*match_len)(const struct nf_conn *ct,
-				     const char *dptr, const char *limit,
-				     int *shift);
-};
-
-#define __SIP_HDR(__name, __cname, __search, __match)			\
-{									\
-	.name		= (__name),					\
-	.len		= sizeof(__name) - 1,				\
-	.cname		= (__cname),					\
-	.clen		= (__cname) ? sizeof(__cname) - 1 : 0,		\
-	.search		= (__search),					\
-	.slen		= (__search) ? sizeof(__search) - 1 : 0,	\
-	.match_len	= (__match),					\
-}
-
-#define SIP_HDR(__name, __cname, __search, __match) \
-	__SIP_HDR(__name, __cname, __search, __match)
-
-#define SDP_HDR(__name, __search, __match) \
-	__SIP_HDR(__name, NULL, __search, __match)
-
-enum sip_header_types {
-	SIP_HDR_CSEQ,
-	SIP_HDR_FROM,
-	SIP_HDR_TO,
-	SIP_HDR_CONTACT,
-	SIP_HDR_VIA_UDP,
-	SIP_HDR_VIA_TCP,
-	SIP_HDR_EXPIRES,
-	SIP_HDR_CONTENT_LENGTH,
-	SIP_HDR_CALL_ID,
-};
-
-enum sdp_header_types {
-	SDP_HDR_UNSPEC,
-	SDP_HDR_VERSION,
-	SDP_HDR_OWNER_IP4,
-	SDP_HDR_CONNECTION_IP4,
-	SDP_HDR_OWNER_IP6,
-	SDP_HDR_CONNECTION_IP6,
-	SDP_HDR_MEDIA,
-};
-
-extern unsigned int (*nf_nat_sip_hook)(struct sk_buff *skb,
-				       unsigned int dataoff,
-				       const char **dptr,
-				       unsigned int *datalen);
-extern void (*nf_nat_sip_seq_adjust_hook)(struct sk_buff *skb, s16 off);
-extern unsigned int (*nf_nat_sip_expect_hook)(struct sk_buff *skb,
-					      unsigned int dataoff,
-					      const char **dptr,
-					      unsigned int *datalen,
-					      struct nf_conntrack_expect *exp,
-					      unsigned int matchoff,
-					      unsigned int matchlen);
-extern unsigned int (*nf_nat_sdp_addr_hook)(struct sk_buff *skb,
-					    unsigned int dataoff,
-					    const char **dptr,
-					    unsigned int *datalen,
-					    unsigned int sdpoff,
-					    enum sdp_header_types type,
-					    enum sdp_header_types term,
-					    const union nf_inet_addr *addr);
-extern unsigned int (*nf_nat_sdp_port_hook)(struct sk_buff *skb,
-					    unsigned int dataoff,
-					    const char **dptr,
-					    unsigned int *datalen,
-					    unsigned int matchoff,
-					    unsigned int matchlen,
-					    u_int16_t port);
-extern unsigned int (*nf_nat_sdp_session_hook)(struct sk_buff *skb,
-					       unsigned int dataoff,
-					       const char **dptr,
-					       unsigned int *datalen,
-					       unsigned int sdpoff,
-					       const union nf_inet_addr *addr);
-extern unsigned int (*nf_nat_sdp_media_hook)(struct sk_buff *skb,
-					     unsigned int dataoff,
-					     const char **dptr,
-					     unsigned int *datalen,
-					     struct nf_conntrack_expect *rtp_exp,
-					     struct nf_conntrack_expect *rtcp_exp,
-					     unsigned int mediaoff,
-					     unsigned int medialen,
-					     union nf_inet_addr *rtp_addr);
-
-extern int ct_sip_parse_request(const struct nf_conn *ct,
-				const char *dptr, unsigned int datalen,
-				unsigned int *matchoff, unsigned int *matchlen,
-				union nf_inet_addr *addr, __be16 *port);
-extern int ct_sip_get_header(const struct nf_conn *ct, const char *dptr,
-			     unsigned int dataoff, unsigned int datalen,
-			     enum sip_header_types type,
-			     unsigned int *matchoff, unsigned int *matchlen);
-extern int ct_sip_parse_header_uri(const struct nf_conn *ct, const char *dptr,
-				   unsigned int *dataoff, unsigned int datalen,
-				   enum sip_header_types type, int *in_header,
-				   unsigned int *matchoff, unsigned int *matchlen,
-				   union nf_inet_addr *addr, __be16 *port);
-extern int ct_sip_parse_address_param(const struct nf_conn *ct, const char *dptr,
-				      unsigned int dataoff, unsigned int datalen,
-				      const char *name,
-				      unsigned int *matchoff, unsigned int *matchlen,
-				      union nf_inet_addr *addr);
-extern int ct_sip_parse_numerical_param(const struct nf_conn *ct, const char *dptr,
-					unsigned int off, unsigned int datalen,
-					const char *name,
-					unsigned int *matchoff, unsigned int *matchen,
-					unsigned int *val);
-
-extern int ct_sip_get_sdp_header(const struct nf_conn *ct, const char *dptr,
-				 unsigned int dataoff, unsigned int datalen,
-				 enum sdp_header_types type,
-				 enum sdp_header_types term,
-				 unsigned int *matchoff, unsigned int *matchlen);
-
-#endif /* __KERNEL__ */
-#endif /* __NF_CONNTRACK_SIP_H__ */
diff --git a/ANDROID_3.4.5/include/linux/netfilter/nf_conntrack_snmp.h b/ANDROID_3.4.5/include/linux/netfilter/nf_conntrack_snmp.h
deleted file mode 100644
index 064bc63a..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter/nf_conntrack_snmp.h
+++ /dev/null
@@ -1,9 +0,0 @@
-#ifndef _NF_CONNTRACK_SNMP_H
-#define _NF_CONNTRACK_SNMP_H
-
-extern int (*nf_nat_snmp_hook)(struct sk_buff *skb,
-				unsigned int protoff,
-				struct nf_conn *ct,
-				enum ip_conntrack_info ctinfo);
-
-#endif /* _NF_CONNTRACK_SNMP_H */
diff --git a/ANDROID_3.4.5/include/linux/netfilter/nf_conntrack_tcp.h b/ANDROID_3.4.5/include/linux/netfilter/nf_conntrack_tcp.h
deleted file mode 100644
index e59868ae..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter/nf_conntrack_tcp.h
+++ /dev/null
@@ -1,79 +0,0 @@
-#ifndef _NF_CONNTRACK_TCP_H
-#define _NF_CONNTRACK_TCP_H
-/* TCP tracking. */
-
-#include <linux/types.h>
-
-/* This is exposed to userspace (ctnetlink) */
-enum tcp_conntrack {
-	TCP_CONNTRACK_NONE,
-	TCP_CONNTRACK_SYN_SENT,
-	TCP_CONNTRACK_SYN_RECV,
-	TCP_CONNTRACK_ESTABLISHED,
-	TCP_CONNTRACK_FIN_WAIT,
-	TCP_CONNTRACK_CLOSE_WAIT,
-	TCP_CONNTRACK_LAST_ACK,
-	TCP_CONNTRACK_TIME_WAIT,
-	TCP_CONNTRACK_CLOSE,
-	TCP_CONNTRACK_LISTEN,	/* obsolete */
-#define TCP_CONNTRACK_SYN_SENT2	TCP_CONNTRACK_LISTEN
-	TCP_CONNTRACK_MAX,
-	TCP_CONNTRACK_IGNORE,
-	TCP_CONNTRACK_RETRANS,
-	TCP_CONNTRACK_UNACK,
-	TCP_CONNTRACK_TIMEOUT_MAX
-};
-
-/* Window scaling is advertised by the sender */
-#define IP_CT_TCP_FLAG_WINDOW_SCALE		0x01
-
-/* SACK is permitted by the sender */
-#define IP_CT_TCP_FLAG_SACK_PERM		0x02
-
-/* This sender sent FIN first */
-#define IP_CT_TCP_FLAG_CLOSE_INIT		0x04
-
-/* Be liberal in window checking */
-#define IP_CT_TCP_FLAG_BE_LIBERAL		0x08
-
-/* Has unacknowledged data */
-#define IP_CT_TCP_FLAG_DATA_UNACKNOWLEDGED	0x10
-
-/* The field td_maxack has been set */
-#define IP_CT_TCP_FLAG_MAXACK_SET		0x20
-
-struct nf_ct_tcp_flags {
-	__u8 flags;
-	__u8 mask;
-};
-
-#ifdef __KERNEL__
-
-struct ip_ct_tcp_state {
-	u_int32_t	td_end;		/* max of seq + len */
-	u_int32_t	td_maxend;	/* max of ack + max(win, 1) */
-	u_int32_t	td_maxwin;	/* max(win) */
-	u_int32_t	td_maxack;	/* max of ack */
-	u_int8_t	td_scale;	/* window scale factor */
-	u_int8_t	flags;		/* per direction options */
-};
-
-struct ip_ct_tcp {
-	struct ip_ct_tcp_state seen[2];	/* connection parameters per direction */
-	u_int8_t	state;		/* state of the connection (enum tcp_conntrack) */
-	/* For detecting stale connections */
-	u_int8_t	last_dir;	/* Direction of the last packet (enum ip_conntrack_dir) */
-	u_int8_t	retrans;	/* Number of retransmitted packets */
-	u_int8_t	last_index;	/* Index of the last packet */
-	u_int32_t	last_seq;	/* Last sequence number seen in dir */
-	u_int32_t	last_ack;	/* Last sequence number seen in opposite dir */
-	u_int32_t	last_end;	/* Last seq + len */
-	u_int16_t	last_win;	/* Last window advertisement seen in dir */
-	/* For SYN packets while we may be out-of-sync */
-	u_int8_t	last_wscale;	/* Last window scaling factor seen */
-	u_int8_t	last_flags;	/* Last flags set */
-};
-
-#endif /* __KERNEL__ */
-
-#endif /* _NF_CONNTRACK_TCP_H */
diff --git a/ANDROID_3.4.5/include/linux/netfilter/nf_conntrack_tftp.h b/ANDROID_3.4.5/include/linux/netfilter/nf_conntrack_tftp.h
deleted file mode 100644
index c78d38fd..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter/nf_conntrack_tftp.h
+++ /dev/null
@@ -1,20 +0,0 @@
-#ifndef _NF_CONNTRACK_TFTP_H
-#define _NF_CONNTRACK_TFTP_H
-
-#define TFTP_PORT 69
-
-struct tftphdr {
-	__be16 opcode;
-};
-
-#define TFTP_OPCODE_READ	1
-#define TFTP_OPCODE_WRITE	2
-#define TFTP_OPCODE_DATA	3
-#define TFTP_OPCODE_ACK		4
-#define TFTP_OPCODE_ERROR	5
-
-extern unsigned int (*nf_nat_tftp_hook)(struct sk_buff *skb,
-				        enum ip_conntrack_info ctinfo,
-				        struct nf_conntrack_expect *exp);
-
-#endif /* _NF_CONNTRACK_TFTP_H */
diff --git a/ANDROID_3.4.5/include/linux/netfilter/nf_conntrack_tuple_common.h b/ANDROID_3.4.5/include/linux/netfilter/nf_conntrack_tuple_common.h
deleted file mode 100644
index 2f6bbc5b..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter/nf_conntrack_tuple_common.h
+++ /dev/null
@@ -1,39 +0,0 @@
-#ifndef _NF_CONNTRACK_TUPLE_COMMON_H
-#define _NF_CONNTRACK_TUPLE_COMMON_H
-
-enum ip_conntrack_dir {
-	IP_CT_DIR_ORIGINAL,
-	IP_CT_DIR_REPLY,
-	IP_CT_DIR_MAX
-};
-
-/* The protocol-specific manipulable parts of the tuple: always in
- * network order
- */
-union nf_conntrack_man_proto {
-	/* Add other protocols here. */
-	__be16 all;
-
-	struct {
-		__be16 port;
-	} tcp;
-	struct {
-		__be16 port;
-	} udp;
-	struct {
-		__be16 id;
-	} icmp;
-	struct {
-		__be16 port;
-	} dccp;
-	struct {
-		__be16 port;
-	} sctp;
-	struct {
-		__be16 key;	/* GRE key is 32bit, PPtP only uses 16bit */
-	} gre;
-};
-
-#define CTINFO2DIR(ctinfo) ((ctinfo) >= IP_CT_IS_REPLY ? IP_CT_DIR_REPLY : IP_CT_DIR_ORIGINAL)
-
-#endif /* _NF_CONNTRACK_TUPLE_COMMON_H */
diff --git a/ANDROID_3.4.5/include/linux/netfilter/nf_nat.h b/ANDROID_3.4.5/include/linux/netfilter/nf_nat.h
deleted file mode 100644
index 8df2d137..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter/nf_nat.h
+++ /dev/null
@@ -1,25 +0,0 @@
-#ifndef _NETFILTER_NF_NAT_H
-#define _NETFILTER_NF_NAT_H
-
-#include <linux/netfilter.h>
-#include <linux/netfilter/nf_conntrack_tuple_common.h>
-
-#define NF_NAT_RANGE_MAP_IPS		1
-#define NF_NAT_RANGE_PROTO_SPECIFIED	2
-#define NF_NAT_RANGE_PROTO_RANDOM	4
-#define NF_NAT_RANGE_PERSISTENT		8
-
-struct nf_nat_ipv4_range {
-	unsigned int			flags;
-	__be32				min_ip;
-	__be32				max_ip;
-	union nf_conntrack_man_proto	min;
-	union nf_conntrack_man_proto	max;
-};
-
-struct nf_nat_ipv4_multi_range_compat {
-	unsigned int			rangesize;
-	struct nf_nat_ipv4_range	range[1];
-};
-
-#endif /* _NETFILTER_NF_NAT_H */
diff --git a/ANDROID_3.4.5/include/linux/netfilter/nfnetlink.h b/ANDROID_3.4.5/include/linux/netfilter/nfnetlink.h
deleted file mode 100644
index 6fd1f0d0..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter/nfnetlink.h
+++ /dev/null
@@ -1,95 +0,0 @@
-#ifndef _NFNETLINK_H
-#define _NFNETLINK_H
-#include <linux/types.h>
-#include <linux/netfilter/nfnetlink_compat.h>
-
-enum nfnetlink_groups {
-	NFNLGRP_NONE,
-#define NFNLGRP_NONE			NFNLGRP_NONE
-	NFNLGRP_CONNTRACK_NEW,
-#define NFNLGRP_CONNTRACK_NEW		NFNLGRP_CONNTRACK_NEW
-	NFNLGRP_CONNTRACK_UPDATE,
-#define NFNLGRP_CONNTRACK_UPDATE	NFNLGRP_CONNTRACK_UPDATE
-	NFNLGRP_CONNTRACK_DESTROY,
-#define NFNLGRP_CONNTRACK_DESTROY	NFNLGRP_CONNTRACK_DESTROY
-	NFNLGRP_CONNTRACK_EXP_NEW,
-#define	NFNLGRP_CONNTRACK_EXP_NEW	NFNLGRP_CONNTRACK_EXP_NEW
-	NFNLGRP_CONNTRACK_EXP_UPDATE,
-#define NFNLGRP_CONNTRACK_EXP_UPDATE	NFNLGRP_CONNTRACK_EXP_UPDATE
-	NFNLGRP_CONNTRACK_EXP_DESTROY,
-#define NFNLGRP_CONNTRACK_EXP_DESTROY	NFNLGRP_CONNTRACK_EXP_DESTROY
-	__NFNLGRP_MAX,
-};
-#define NFNLGRP_MAX	(__NFNLGRP_MAX - 1)
-
-/* General form of address family dependent message.
- */
-struct nfgenmsg {
-	__u8  nfgen_family;		/* AF_xxx */
-	__u8  version;		/* nfnetlink version */
-	__be16    res_id;		/* resource id */
-};
-
-#define NFNETLINK_V0	0
-
-/* netfilter netlink message types are split in two pieces:
- * 8 bit subsystem, 8bit operation.
- */
-
-#define NFNL_SUBSYS_ID(x)	((x & 0xff00) >> 8)
-#define NFNL_MSG_TYPE(x)	(x & 0x00ff)
-
-/* No enum here, otherwise __stringify() trick of MODULE_ALIAS_NFNL_SUBSYS()
- * won't work anymore */
-#define NFNL_SUBSYS_NONE 		0
-#define NFNL_SUBSYS_CTNETLINK		1
-#define NFNL_SUBSYS_CTNETLINK_EXP	2
-#define NFNL_SUBSYS_QUEUE		3
-#define NFNL_SUBSYS_ULOG		4
-#define NFNL_SUBSYS_OSF			5
-#define NFNL_SUBSYS_IPSET		6
-#define NFNL_SUBSYS_ACCT		7
-#define NFNL_SUBSYS_CTNETLINK_TIMEOUT	8
-#define NFNL_SUBSYS_COUNT		9
-
-#ifdef __KERNEL__
-
-#include <linux/netlink.h>
-#include <linux/capability.h>
-#include <net/netlink.h>
-
-struct nfnl_callback {
-	int (*call)(struct sock *nl, struct sk_buff *skb, 
-		    const struct nlmsghdr *nlh,
-		    const struct nlattr * const cda[]);
-	int (*call_rcu)(struct sock *nl, struct sk_buff *skb, 
-		    const struct nlmsghdr *nlh,
-		    const struct nlattr * const cda[]);
-	const struct nla_policy *policy;	/* netlink attribute policy */
-	const u_int16_t attr_count;		/* number of nlattr's */
-};
-
-struct nfnetlink_subsystem {
-	const char *name;
-	__u8 subsys_id;			/* nfnetlink subsystem ID */
-	__u8 cb_count;			/* number of callbacks */
-	const struct nfnl_callback *cb;	/* callback for individual types */
-};
-
-extern int nfnetlink_subsys_register(const struct nfnetlink_subsystem *n);
-extern int nfnetlink_subsys_unregister(const struct nfnetlink_subsystem *n);
-
-extern int nfnetlink_has_listeners(struct net *net, unsigned int group);
-extern int nfnetlink_send(struct sk_buff *skb, struct net *net, u32 pid, unsigned group,
-			  int echo, gfp_t flags);
-extern int nfnetlink_set_err(struct net *net, u32 pid, u32 group, int error);
-extern int nfnetlink_unicast(struct sk_buff *skb, struct net *net, u_int32_t pid, int flags);
-
-extern void nfnl_lock(void);
-extern void nfnl_unlock(void);
-
-#define MODULE_ALIAS_NFNL_SUBSYS(subsys) \
-	MODULE_ALIAS("nfnetlink-subsys-" __stringify(subsys))
-
-#endif	/* __KERNEL__ */
-#endif	/* _NFNETLINK_H */
diff --git a/ANDROID_3.4.5/include/linux/netfilter/nfnetlink_acct.h b/ANDROID_3.4.5/include/linux/netfilter/nfnetlink_acct.h
deleted file mode 100644
index 7c4279b4..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter/nfnetlink_acct.h
+++ /dev/null
@@ -1,36 +0,0 @@
-#ifndef _NFNL_ACCT_H_
-#define _NFNL_ACCT_H_
-
-#ifndef NFACCT_NAME_MAX
-#define NFACCT_NAME_MAX		32
-#endif
-
-enum nfnl_acct_msg_types {
-	NFNL_MSG_ACCT_NEW,
-	NFNL_MSG_ACCT_GET,
-	NFNL_MSG_ACCT_GET_CTRZERO,
-	NFNL_MSG_ACCT_DEL,
-	NFNL_MSG_ACCT_MAX
-};
-
-enum nfnl_acct_type {
-	NFACCT_UNSPEC,
-	NFACCT_NAME,
-	NFACCT_PKTS,
-	NFACCT_BYTES,
-	NFACCT_USE,
-	__NFACCT_MAX
-};
-#define NFACCT_MAX (__NFACCT_MAX - 1)
-
-#ifdef __KERNEL__
-
-struct nf_acct;
-
-extern struct nf_acct *nfnl_acct_find_get(const char *filter_name);
-extern void nfnl_acct_put(struct nf_acct *acct);
-extern void nfnl_acct_update(const struct sk_buff *skb, struct nf_acct *nfacct);
-
-#endif /* __KERNEL__ */
-
-#endif /* _NFNL_ACCT_H */
diff --git a/ANDROID_3.4.5/include/linux/netfilter/nfnetlink_compat.h b/ANDROID_3.4.5/include/linux/netfilter/nfnetlink_compat.h
deleted file mode 100644
index ffb95036..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter/nfnetlink_compat.h
+++ /dev/null
@@ -1,63 +0,0 @@
-#ifndef _NFNETLINK_COMPAT_H
-#define _NFNETLINK_COMPAT_H
-
-#include <linux/types.h>
-
-#ifndef __KERNEL__
-/* Old nfnetlink macros for userspace */
-
-/* nfnetlink groups: Up to 32 maximum */
-#define NF_NETLINK_CONNTRACK_NEW 		0x00000001
-#define NF_NETLINK_CONNTRACK_UPDATE		0x00000002
-#define NF_NETLINK_CONNTRACK_DESTROY		0x00000004
-#define NF_NETLINK_CONNTRACK_EXP_NEW		0x00000008
-#define NF_NETLINK_CONNTRACK_EXP_UPDATE		0x00000010
-#define NF_NETLINK_CONNTRACK_EXP_DESTROY	0x00000020
-
-/* Generic structure for encapsulation optional netfilter information.
- * It is reminiscent of sockaddr, but with sa_family replaced
- * with attribute type.
- * ! This should someday be put somewhere generic as now rtnetlink and
- * ! nfnetlink use the same attributes methods. - J. Schulist.
- */
-
-struct nfattr {
-	__u16 nfa_len;
-	__u16 nfa_type;	/* we use 15 bits for the type, and the highest
-				 * bit to indicate whether the payload is nested */
-};
-
-/* FIXME: Apart from NFNL_NFA_NESTED shamelessly copy and pasted from
- * rtnetlink.h, it's time to put this in a generic file */
-
-#define NFNL_NFA_NEST	0x8000
-#define NFA_TYPE(attr) 	((attr)->nfa_type & 0x7fff)
-
-#define NFA_ALIGNTO     4
-#define NFA_ALIGN(len)	(((len) + NFA_ALIGNTO - 1) & ~(NFA_ALIGNTO - 1))
-#define NFA_OK(nfa,len)	((len) > 0 && (nfa)->nfa_len >= sizeof(struct nfattr) \
-	&& (nfa)->nfa_len <= (len))
-#define NFA_NEXT(nfa,attrlen)	((attrlen) -= NFA_ALIGN((nfa)->nfa_len), \
-	(struct nfattr *)(((char *)(nfa)) + NFA_ALIGN((nfa)->nfa_len)))
-#define NFA_LENGTH(len)	(NFA_ALIGN(sizeof(struct nfattr)) + (len))
-#define NFA_SPACE(len)	NFA_ALIGN(NFA_LENGTH(len))
-#define NFA_DATA(nfa)   ((void *)(((char *)(nfa)) + NFA_LENGTH(0)))
-#define NFA_PAYLOAD(nfa) ((int)((nfa)->nfa_len) - NFA_LENGTH(0))
-#define NFA_NEST(skb, type) \
-({	struct nfattr *__start = (struct nfattr *)skb_tail_pointer(skb); \
-	NFA_PUT(skb, (NFNL_NFA_NEST | type), 0, NULL); \
-	__start;  })
-#define NFA_NEST_END(skb, start) \
-({      (start)->nfa_len = skb_tail_pointer(skb) - (unsigned char *)(start); \
-        (skb)->len; })
-#define NFA_NEST_CANCEL(skb, start) \
-({      if (start) \
-                skb_trim(skb, (unsigned char *) (start) - (skb)->data); \
-        -1; })
-
-#define NFM_NFA(n)      ((struct nfattr *)(((char *)(n)) \
-        + NLMSG_ALIGN(sizeof(struct nfgenmsg))))
-#define NFM_PAYLOAD(n)  NLMSG_PAYLOAD(n, sizeof(struct nfgenmsg))
-
-#endif /* ! __KERNEL__ */
-#endif /* _NFNETLINK_COMPAT_H */
diff --git a/ANDROID_3.4.5/include/linux/netfilter/nfnetlink_conntrack.h b/ANDROID_3.4.5/include/linux/netfilter/nfnetlink_conntrack.h
deleted file mode 100644
index e58e4b93..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter/nfnetlink_conntrack.h
+++ /dev/null
@@ -1,205 +0,0 @@
-#ifndef _IPCONNTRACK_NETLINK_H
-#define _IPCONNTRACK_NETLINK_H
-#include <linux/netfilter/nfnetlink.h>
-
-enum cntl_msg_types {
-	IPCTNL_MSG_CT_NEW,
-	IPCTNL_MSG_CT_GET,
-	IPCTNL_MSG_CT_DELETE,
-	IPCTNL_MSG_CT_GET_CTRZERO,
-
-	IPCTNL_MSG_MAX
-};
-
-enum ctnl_exp_msg_types {
-	IPCTNL_MSG_EXP_NEW,
-	IPCTNL_MSG_EXP_GET,
-	IPCTNL_MSG_EXP_DELETE,
-
-	IPCTNL_MSG_EXP_MAX
-};
-
-
-enum ctattr_type {
-	CTA_UNSPEC,
-	CTA_TUPLE_ORIG,
-	CTA_TUPLE_REPLY,
-	CTA_STATUS,
-	CTA_PROTOINFO,
-	CTA_HELP,
-	CTA_NAT_SRC,
-#define CTA_NAT	CTA_NAT_SRC	/* backwards compatibility */
-	CTA_TIMEOUT,
-	CTA_MARK,
-	CTA_COUNTERS_ORIG,
-	CTA_COUNTERS_REPLY,
-	CTA_USE,
-	CTA_ID,
-	CTA_NAT_DST,
-	CTA_TUPLE_MASTER,
-	CTA_NAT_SEQ_ADJ_ORIG,
-	CTA_NAT_SEQ_ADJ_REPLY,
-	CTA_SECMARK,		/* obsolete */
-	CTA_ZONE,
-	CTA_SECCTX,
-	CTA_TIMESTAMP,
-	CTA_MARK_MASK,
-	__CTA_MAX
-};
-#define CTA_MAX (__CTA_MAX - 1)
-
-enum ctattr_tuple {
-	CTA_TUPLE_UNSPEC,
-	CTA_TUPLE_IP,
-	CTA_TUPLE_PROTO,
-	__CTA_TUPLE_MAX
-};
-#define CTA_TUPLE_MAX (__CTA_TUPLE_MAX - 1)
-
-enum ctattr_ip {
-	CTA_IP_UNSPEC,
-	CTA_IP_V4_SRC,
-	CTA_IP_V4_DST,
-	CTA_IP_V6_SRC,
-	CTA_IP_V6_DST,
-	__CTA_IP_MAX
-};
-#define CTA_IP_MAX (__CTA_IP_MAX - 1)
-
-enum ctattr_l4proto {
-	CTA_PROTO_UNSPEC,
-	CTA_PROTO_NUM,
-	CTA_PROTO_SRC_PORT,
-	CTA_PROTO_DST_PORT,
-	CTA_PROTO_ICMP_ID,
-	CTA_PROTO_ICMP_TYPE,
-	CTA_PROTO_ICMP_CODE,
-	CTA_PROTO_ICMPV6_ID,
-	CTA_PROTO_ICMPV6_TYPE,
-	CTA_PROTO_ICMPV6_CODE,
-	__CTA_PROTO_MAX
-};
-#define CTA_PROTO_MAX (__CTA_PROTO_MAX - 1)
-
-enum ctattr_protoinfo {
-	CTA_PROTOINFO_UNSPEC,
-	CTA_PROTOINFO_TCP,
-	CTA_PROTOINFO_DCCP,
-	CTA_PROTOINFO_SCTP,
-	__CTA_PROTOINFO_MAX
-};
-#define CTA_PROTOINFO_MAX (__CTA_PROTOINFO_MAX - 1)
-
-enum ctattr_protoinfo_tcp {
-	CTA_PROTOINFO_TCP_UNSPEC,
-	CTA_PROTOINFO_TCP_STATE,
-	CTA_PROTOINFO_TCP_WSCALE_ORIGINAL,
-	CTA_PROTOINFO_TCP_WSCALE_REPLY,
-	CTA_PROTOINFO_TCP_FLAGS_ORIGINAL,
-	CTA_PROTOINFO_TCP_FLAGS_REPLY,
-	__CTA_PROTOINFO_TCP_MAX
-};
-#define CTA_PROTOINFO_TCP_MAX (__CTA_PROTOINFO_TCP_MAX - 1)
-
-enum ctattr_protoinfo_dccp {
-	CTA_PROTOINFO_DCCP_UNSPEC,
-	CTA_PROTOINFO_DCCP_STATE,
-	CTA_PROTOINFO_DCCP_ROLE,
-	CTA_PROTOINFO_DCCP_HANDSHAKE_SEQ,
-	__CTA_PROTOINFO_DCCP_MAX,
-};
-#define CTA_PROTOINFO_DCCP_MAX (__CTA_PROTOINFO_DCCP_MAX - 1)
-
-enum ctattr_protoinfo_sctp {
-	CTA_PROTOINFO_SCTP_UNSPEC,
-	CTA_PROTOINFO_SCTP_STATE,
-	CTA_PROTOINFO_SCTP_VTAG_ORIGINAL,
-	CTA_PROTOINFO_SCTP_VTAG_REPLY,
-	__CTA_PROTOINFO_SCTP_MAX
-};
-#define CTA_PROTOINFO_SCTP_MAX (__CTA_PROTOINFO_SCTP_MAX - 1)
-
-enum ctattr_counters {
-	CTA_COUNTERS_UNSPEC,
-	CTA_COUNTERS_PACKETS,		/* 64bit counters */
-	CTA_COUNTERS_BYTES,		/* 64bit counters */
-	CTA_COUNTERS32_PACKETS,		/* old 32bit counters, unused */
-	CTA_COUNTERS32_BYTES,		/* old 32bit counters, unused */
-	__CTA_COUNTERS_MAX
-};
-#define CTA_COUNTERS_MAX (__CTA_COUNTERS_MAX - 1)
-
-enum ctattr_tstamp {
-	CTA_TIMESTAMP_UNSPEC,
-	CTA_TIMESTAMP_START,
-	CTA_TIMESTAMP_STOP,
-	__CTA_TIMESTAMP_MAX
-};
-#define CTA_TIMESTAMP_MAX (__CTA_TIMESTAMP_MAX - 1)
-
-enum ctattr_nat {
-	CTA_NAT_UNSPEC,
-	CTA_NAT_MINIP,
-	CTA_NAT_MAXIP,
-	CTA_NAT_PROTO,
-	__CTA_NAT_MAX
-};
-#define CTA_NAT_MAX (__CTA_NAT_MAX - 1)
-
-enum ctattr_protonat {
-	CTA_PROTONAT_UNSPEC,
-	CTA_PROTONAT_PORT_MIN,
-	CTA_PROTONAT_PORT_MAX,
-	__CTA_PROTONAT_MAX
-};
-#define CTA_PROTONAT_MAX (__CTA_PROTONAT_MAX - 1)
-
-enum ctattr_natseq {
-	CTA_NAT_SEQ_UNSPEC,
-	CTA_NAT_SEQ_CORRECTION_POS,
-	CTA_NAT_SEQ_OFFSET_BEFORE,
-	CTA_NAT_SEQ_OFFSET_AFTER,
-	__CTA_NAT_SEQ_MAX
-};
-#define CTA_NAT_SEQ_MAX (__CTA_NAT_SEQ_MAX - 1)
-
-enum ctattr_expect {
-	CTA_EXPECT_UNSPEC,
-	CTA_EXPECT_MASTER,
-	CTA_EXPECT_TUPLE,
-	CTA_EXPECT_MASK,
-	CTA_EXPECT_TIMEOUT,
-	CTA_EXPECT_ID,
-	CTA_EXPECT_HELP_NAME,
-	CTA_EXPECT_ZONE,
-	CTA_EXPECT_FLAGS,
-	CTA_EXPECT_CLASS,
-	CTA_EXPECT_NAT,
-	CTA_EXPECT_FN,
-	__CTA_EXPECT_MAX
-};
-#define CTA_EXPECT_MAX (__CTA_EXPECT_MAX - 1)
-
-enum ctattr_expect_nat {
-	CTA_EXPECT_NAT_UNSPEC,
-	CTA_EXPECT_NAT_DIR,
-	CTA_EXPECT_NAT_TUPLE,
-	__CTA_EXPECT_NAT_MAX
-};
-#define CTA_EXPECT_NAT_MAX (__CTA_EXPECT_NAT_MAX - 1)
-
-enum ctattr_help {
-	CTA_HELP_UNSPEC,
-	CTA_HELP_NAME,
-	__CTA_HELP_MAX
-};
-#define CTA_HELP_MAX (__CTA_HELP_MAX - 1)
-
-enum ctattr_secctx {
-	CTA_SECCTX_UNSPEC,
-	CTA_SECCTX_NAME,
-	__CTA_SECCTX_MAX
-};
-#define CTA_SECCTX_MAX (__CTA_SECCTX_MAX - 1)
-
-#endif /* _IPCONNTRACK_NETLINK_H */
diff --git a/ANDROID_3.4.5/include/linux/netfilter/nfnetlink_cttimeout.h b/ANDROID_3.4.5/include/linux/netfilter/nfnetlink_cttimeout.h
deleted file mode 100644
index a2810a7c..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter/nfnetlink_cttimeout.h
+++ /dev/null
@@ -1,114 +0,0 @@
-#ifndef _CTTIMEOUT_NETLINK_H
-#define _CTTIMEOUT_NETLINK_H
-#include <linux/netfilter/nfnetlink.h>
-
-enum ctnl_timeout_msg_types {
-	IPCTNL_MSG_TIMEOUT_NEW,
-	IPCTNL_MSG_TIMEOUT_GET,
-	IPCTNL_MSG_TIMEOUT_DELETE,
-
-	IPCTNL_MSG_TIMEOUT_MAX
-};
-
-enum ctattr_timeout {
-	CTA_TIMEOUT_UNSPEC,
-	CTA_TIMEOUT_NAME,
-	CTA_TIMEOUT_L3PROTO,
-	CTA_TIMEOUT_L4PROTO,
-	CTA_TIMEOUT_DATA,
-	CTA_TIMEOUT_USE,
-	__CTA_TIMEOUT_MAX
-};
-#define CTA_TIMEOUT_MAX (__CTA_TIMEOUT_MAX - 1)
-
-enum ctattr_timeout_generic {
-	CTA_TIMEOUT_GENERIC_UNSPEC,
-	CTA_TIMEOUT_GENERIC_TIMEOUT,
-	__CTA_TIMEOUT_GENERIC_MAX
-};
-#define CTA_TIMEOUT_GENERIC_MAX (__CTA_TIMEOUT_GENERIC_MAX - 1)
-
-enum ctattr_timeout_tcp {
-	CTA_TIMEOUT_TCP_UNSPEC,
-	CTA_TIMEOUT_TCP_SYN_SENT,
-	CTA_TIMEOUT_TCP_SYN_RECV,
-	CTA_TIMEOUT_TCP_ESTABLISHED,
-	CTA_TIMEOUT_TCP_FIN_WAIT,
-	CTA_TIMEOUT_TCP_CLOSE_WAIT,
-	CTA_TIMEOUT_TCP_LAST_ACK,
-	CTA_TIMEOUT_TCP_TIME_WAIT,
-	CTA_TIMEOUT_TCP_CLOSE,
-	CTA_TIMEOUT_TCP_SYN_SENT2,
-	CTA_TIMEOUT_TCP_RETRANS,
-	CTA_TIMEOUT_TCP_UNACK,
-	__CTA_TIMEOUT_TCP_MAX
-};
-#define CTA_TIMEOUT_TCP_MAX (__CTA_TIMEOUT_TCP_MAX - 1)
-
-enum ctattr_timeout_udp {
-	CTA_TIMEOUT_UDP_UNSPEC,
-	CTA_TIMEOUT_UDP_UNREPLIED,
-	CTA_TIMEOUT_UDP_REPLIED,
-	__CTA_TIMEOUT_UDP_MAX
-};
-#define CTA_TIMEOUT_UDP_MAX (__CTA_TIMEOUT_UDP_MAX - 1)
-
-enum ctattr_timeout_udplite {
-	CTA_TIMEOUT_UDPLITE_UNSPEC,
-	CTA_TIMEOUT_UDPLITE_UNREPLIED,
-	CTA_TIMEOUT_UDPLITE_REPLIED,
-	__CTA_TIMEOUT_UDPLITE_MAX
-};
-#define CTA_TIMEOUT_UDPLITE_MAX (__CTA_TIMEOUT_UDPLITE_MAX - 1)
-
-enum ctattr_timeout_icmp {
-	CTA_TIMEOUT_ICMP_UNSPEC,
-	CTA_TIMEOUT_ICMP_TIMEOUT,
-	__CTA_TIMEOUT_ICMP_MAX
-};
-#define CTA_TIMEOUT_ICMP_MAX (__CTA_TIMEOUT_ICMP_MAX - 1)
-
-enum ctattr_timeout_dccp {
-	CTA_TIMEOUT_DCCP_UNSPEC,
-	CTA_TIMEOUT_DCCP_REQUEST,
-	CTA_TIMEOUT_DCCP_RESPOND,
-	CTA_TIMEOUT_DCCP_PARTOPEN,
-	CTA_TIMEOUT_DCCP_OPEN,
-	CTA_TIMEOUT_DCCP_CLOSEREQ,
-	CTA_TIMEOUT_DCCP_CLOSING,
-	CTA_TIMEOUT_DCCP_TIMEWAIT,
-	__CTA_TIMEOUT_DCCP_MAX
-};
-#define CTA_TIMEOUT_DCCP_MAX (__CTA_TIMEOUT_DCCP_MAX - 1)
-
-enum ctattr_timeout_sctp {
-	CTA_TIMEOUT_SCTP_UNSPEC,
-	CTA_TIMEOUT_SCTP_CLOSED,
-	CTA_TIMEOUT_SCTP_COOKIE_WAIT,
-	CTA_TIMEOUT_SCTP_COOKIE_ECHOED,
-	CTA_TIMEOUT_SCTP_ESTABLISHED,
-	CTA_TIMEOUT_SCTP_SHUTDOWN_SENT,
-	CTA_TIMEOUT_SCTP_SHUTDOWN_RECD,
-	CTA_TIMEOUT_SCTP_SHUTDOWN_ACK_SENT,
-	__CTA_TIMEOUT_SCTP_MAX
-};
-#define CTA_TIMEOUT_SCTP_MAX (__CTA_TIMEOUT_SCTP_MAX - 1)
-
-enum ctattr_timeout_icmpv6 {
-	CTA_TIMEOUT_ICMPV6_UNSPEC,
-	CTA_TIMEOUT_ICMPV6_TIMEOUT,
-	__CTA_TIMEOUT_ICMPV6_MAX
-};
-#define CTA_TIMEOUT_ICMPV6_MAX (__CTA_TIMEOUT_ICMPV6_MAX - 1)
-
-enum ctattr_timeout_gre {
-	CTA_TIMEOUT_GRE_UNSPEC,
-	CTA_TIMEOUT_GRE_UNREPLIED,
-	CTA_TIMEOUT_GRE_REPLIED,
-	__CTA_TIMEOUT_GRE_MAX
-};
-#define CTA_TIMEOUT_GRE_MAX (__CTA_TIMEOUT_GRE_MAX - 1)
-
-#define CTNL_TIMEOUT_NAME_MAX	32
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/netfilter/nfnetlink_log.h b/ANDROID_3.4.5/include/linux/netfilter/nfnetlink_log.h
deleted file mode 100644
index 90c2c957..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter/nfnetlink_log.h
+++ /dev/null
@@ -1,97 +0,0 @@
-#ifndef _NFNETLINK_LOG_H
-#define _NFNETLINK_LOG_H
-
-/* This file describes the netlink messages (i.e. 'protocol packets'),
- * and not any kind of function definitions.  It is shared between kernel and
- * userspace.  Don't put kernel specific stuff in here */
-
-#include <linux/types.h>
-#include <linux/netfilter/nfnetlink.h>
-
-enum nfulnl_msg_types {
-	NFULNL_MSG_PACKET,		/* packet from kernel to userspace */
-	NFULNL_MSG_CONFIG,		/* connect to a particular queue */
-
-	NFULNL_MSG_MAX
-};
-
-struct nfulnl_msg_packet_hdr {
-	__be16		hw_protocol;	/* hw protocol (network order) */
-	__u8	hook;		/* netfilter hook */
-	__u8	_pad;
-};
-
-struct nfulnl_msg_packet_hw {
-	__be16		hw_addrlen;
-	__u16	_pad;
-	__u8	hw_addr[8];
-};
-
-struct nfulnl_msg_packet_timestamp {
-	__aligned_be64	sec;
-	__aligned_be64	usec;
-};
-
-enum nfulnl_attr_type {
-	NFULA_UNSPEC,
-	NFULA_PACKET_HDR,
-	NFULA_MARK,			/* __u32 nfmark */
-	NFULA_TIMESTAMP,		/* nfulnl_msg_packet_timestamp */
-	NFULA_IFINDEX_INDEV,		/* __u32 ifindex */
-	NFULA_IFINDEX_OUTDEV,		/* __u32 ifindex */
-	NFULA_IFINDEX_PHYSINDEV,	/* __u32 ifindex */
-	NFULA_IFINDEX_PHYSOUTDEV,	/* __u32 ifindex */
-	NFULA_HWADDR,			/* nfulnl_msg_packet_hw */
-	NFULA_PAYLOAD,			/* opaque data payload */
-	NFULA_PREFIX,			/* string prefix */
-	NFULA_UID,			/* user id of socket */
-	NFULA_SEQ,			/* instance-local sequence number */
-	NFULA_SEQ_GLOBAL,		/* global sequence number */
-	NFULA_GID,			/* group id of socket */
-	NFULA_HWTYPE,			/* hardware type */
-	NFULA_HWHEADER,			/* hardware header */
-	NFULA_HWLEN,			/* hardware header length */
-
-	__NFULA_MAX
-};
-#define NFULA_MAX (__NFULA_MAX - 1)
-
-enum nfulnl_msg_config_cmds {
-	NFULNL_CFG_CMD_NONE,
-	NFULNL_CFG_CMD_BIND,
-	NFULNL_CFG_CMD_UNBIND,
-	NFULNL_CFG_CMD_PF_BIND,
-	NFULNL_CFG_CMD_PF_UNBIND,
-};
-
-struct nfulnl_msg_config_cmd {
-	__u8	command;	/* nfulnl_msg_config_cmds */
-} __attribute__ ((packed));
-
-struct nfulnl_msg_config_mode {
-	__be32		copy_range;
-	__u8	copy_mode;
-	__u8	_pad;
-} __attribute__ ((packed));
-
-enum nfulnl_attr_config {
-	NFULA_CFG_UNSPEC,
-	NFULA_CFG_CMD,			/* nfulnl_msg_config_cmd */
-	NFULA_CFG_MODE,			/* nfulnl_msg_config_mode */
-	NFULA_CFG_NLBUFSIZ,		/* __u32 buffer size */
-	NFULA_CFG_TIMEOUT,		/* __u32 in 1/100 s */
-	NFULA_CFG_QTHRESH,		/* __u32 */
-	NFULA_CFG_FLAGS,		/* __u16 */
-	__NFULA_CFG_MAX
-};
-#define NFULA_CFG_MAX (__NFULA_CFG_MAX -1)
-
-#define NFULNL_COPY_NONE	0x00
-#define NFULNL_COPY_META	0x01
-#define NFULNL_COPY_PACKET	0x02
-/* 0xff is reserved, don't use it for new copy modes. */
-
-#define NFULNL_CFG_F_SEQ	0x0001
-#define NFULNL_CFG_F_SEQ_GLOBAL	0x0002
-
-#endif /* _NFNETLINK_LOG_H */
diff --git a/ANDROID_3.4.5/include/linux/netfilter/nfnetlink_queue.h b/ANDROID_3.4.5/include/linux/netfilter/nfnetlink_queue.h
deleted file mode 100644
index 24b32e6c..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter/nfnetlink_queue.h
+++ /dev/null
@@ -1,91 +0,0 @@
-#ifndef _NFNETLINK_QUEUE_H
-#define _NFNETLINK_QUEUE_H
-
-#include <linux/types.h>
-#include <linux/netfilter/nfnetlink.h>
-
-enum nfqnl_msg_types {
-	NFQNL_MSG_PACKET,		/* packet from kernel to userspace */
-	NFQNL_MSG_VERDICT,		/* verdict from userspace to kernel */
-	NFQNL_MSG_CONFIG,		/* connect to a particular queue */
-	NFQNL_MSG_VERDICT_BATCH,	/* batchv from userspace to kernel */
-
-	NFQNL_MSG_MAX
-};
-
-struct nfqnl_msg_packet_hdr {
-	__be32		packet_id;	/* unique ID of packet in queue */
-	__be16		hw_protocol;	/* hw protocol (network order) */
-	__u8	hook;		/* netfilter hook */
-} __attribute__ ((packed));
-
-struct nfqnl_msg_packet_hw {
-	__be16		hw_addrlen;
-	__u16	_pad;
-	__u8	hw_addr[8];
-};
-
-struct nfqnl_msg_packet_timestamp {
-	__aligned_be64	sec;
-	__aligned_be64	usec;
-};
-
-enum nfqnl_attr_type {
-	NFQA_UNSPEC,
-	NFQA_PACKET_HDR,
-	NFQA_VERDICT_HDR,		/* nfqnl_msg_verdict_hrd */
-	NFQA_MARK,			/* __u32 nfmark */
-	NFQA_TIMESTAMP,			/* nfqnl_msg_packet_timestamp */
-	NFQA_IFINDEX_INDEV,		/* __u32 ifindex */
-	NFQA_IFINDEX_OUTDEV,		/* __u32 ifindex */
-	NFQA_IFINDEX_PHYSINDEV,		/* __u32 ifindex */
-	NFQA_IFINDEX_PHYSOUTDEV,	/* __u32 ifindex */
-	NFQA_HWADDR,			/* nfqnl_msg_packet_hw */
-	NFQA_PAYLOAD,			/* opaque data payload */
-
-	__NFQA_MAX
-};
-#define NFQA_MAX (__NFQA_MAX - 1)
-
-struct nfqnl_msg_verdict_hdr {
-	__be32 verdict;
-	__be32 id;
-};
-
-
-enum nfqnl_msg_config_cmds {
-	NFQNL_CFG_CMD_NONE,
-	NFQNL_CFG_CMD_BIND,
-	NFQNL_CFG_CMD_UNBIND,
-	NFQNL_CFG_CMD_PF_BIND,
-	NFQNL_CFG_CMD_PF_UNBIND,
-};
-
-struct nfqnl_msg_config_cmd {
-	__u8	command;	/* nfqnl_msg_config_cmds */
-	__u8	_pad;
-	__be16		pf;		/* AF_xxx for PF_[UN]BIND */
-};
-
-enum nfqnl_config_mode {
-	NFQNL_COPY_NONE,
-	NFQNL_COPY_META,
-	NFQNL_COPY_PACKET,
-};
-
-struct nfqnl_msg_config_params {
-	__be32		copy_range;
-	__u8	copy_mode;	/* enum nfqnl_config_mode */
-} __attribute__ ((packed));
-
-
-enum nfqnl_attr_config {
-	NFQA_CFG_UNSPEC,
-	NFQA_CFG_CMD,			/* nfqnl_msg_config_cmd */
-	NFQA_CFG_PARAMS,		/* nfqnl_msg_config_params */
-	NFQA_CFG_QUEUE_MAXLEN,		/* __u32 */
-	__NFQA_CFG_MAX
-};
-#define NFQA_CFG_MAX (__NFQA_CFG_MAX-1)
-
-#endif /* _NFNETLINK_QUEUE_H */
diff --git a/ANDROID_3.4.5/include/linux/netfilter/x_tables.h b/ANDROID_3.4.5/include/linux/netfilter/x_tables.h
deleted file mode 100644
index 8d674a78..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter/x_tables.h
+++ /dev/null
@@ -1,622 +0,0 @@
-#ifndef _X_TABLES_H
-#define _X_TABLES_H
-#include <linux/kernel.h>
-#include <linux/types.h>
-
-#define XT_FUNCTION_MAXNAMELEN 30
-#define XT_EXTENSION_MAXNAMELEN 29
-#define XT_TABLE_MAXNAMELEN 32
-
-struct xt_entry_match {
-	union {
-		struct {
-			__u16 match_size;
-
-			/* Used by userspace */
-			char name[XT_EXTENSION_MAXNAMELEN];
-			__u8 revision;
-		} user;
-		struct {
-			__u16 match_size;
-
-			/* Used inside the kernel */
-			struct xt_match *match;
-		} kernel;
-
-		/* Total length */
-		__u16 match_size;
-	} u;
-
-	unsigned char data[0];
-};
-
-struct xt_entry_target {
-	union {
-		struct {
-			__u16 target_size;
-
-			/* Used by userspace */
-			char name[XT_EXTENSION_MAXNAMELEN];
-			__u8 revision;
-		} user;
-		struct {
-			__u16 target_size;
-
-			/* Used inside the kernel */
-			struct xt_target *target;
-		} kernel;
-
-		/* Total length */
-		__u16 target_size;
-	} u;
-
-	unsigned char data[0];
-};
-
-#define XT_TARGET_INIT(__name, __size)					       \
-{									       \
-	.target.u.user = {						       \
-		.target_size	= XT_ALIGN(__size),			       \
-		.name		= __name,				       \
-	},								       \
-}
-
-struct xt_standard_target {
-	struct xt_entry_target target;
-	int verdict;
-};
-
-struct xt_error_target {
-	struct xt_entry_target target;
-	char errorname[XT_FUNCTION_MAXNAMELEN];
-};
-
-/* The argument to IPT_SO_GET_REVISION_*.  Returns highest revision
- * kernel supports, if >= revision. */
-struct xt_get_revision {
-	char name[XT_EXTENSION_MAXNAMELEN];
-	__u8 revision;
-};
-
-/* CONTINUE verdict for targets */
-#define XT_CONTINUE 0xFFFFFFFF
-
-/* For standard target */
-#define XT_RETURN (-NF_REPEAT - 1)
-
-/* this is a dummy structure to find out the alignment requirement for a struct
- * containing all the fundamental data types that are used in ipt_entry,
- * ip6t_entry and arpt_entry.  This sucks, and it is a hack.  It will be my
- * personal pleasure to remove it -HW
- */
-struct _xt_align {
-	__u8 u8;
-	__u16 u16;
-	__u32 u32;
-	__u64 u64;
-};
-
-#define XT_ALIGN(s) __ALIGN_KERNEL((s), __alignof__(struct _xt_align))
-
-/* Standard return verdict, or do jump. */
-#define XT_STANDARD_TARGET ""
-/* Error verdict. */
-#define XT_ERROR_TARGET "ERROR"
-
-#define SET_COUNTER(c,b,p) do { (c).bcnt = (b); (c).pcnt = (p); } while(0)
-#define ADD_COUNTER(c,b,p) do { (c).bcnt += (b); (c).pcnt += (p); } while(0)
-
-struct xt_counters {
-	__u64 pcnt, bcnt;			/* Packet and byte counters */
-};
-
-/* The argument to IPT_SO_ADD_COUNTERS. */
-struct xt_counters_info {
-	/* Which table. */
-	char name[XT_TABLE_MAXNAMELEN];
-
-	unsigned int num_counters;
-
-	/* The counters (actually `number' of these). */
-	struct xt_counters counters[0];
-};
-
-#define XT_INV_PROTO		0x40	/* Invert the sense of PROTO. */
-
-#ifndef __KERNEL__
-/* fn returns 0 to continue iteration */
-#define XT_MATCH_ITERATE(type, e, fn, args...)			\
-({								\
-	unsigned int __i;					\
-	int __ret = 0;						\
-	struct xt_entry_match *__m;				\
-								\
-	for (__i = sizeof(type);				\
-	     __i < (e)->target_offset;				\
-	     __i += __m->u.match_size) {			\
-		__m = (void *)e + __i;				\
-								\
-		__ret = fn(__m , ## args);			\
-		if (__ret != 0)					\
-			break;					\
-	}							\
-	__ret;							\
-})
-
-/* fn returns 0 to continue iteration */
-#define XT_ENTRY_ITERATE_CONTINUE(type, entries, size, n, fn, args...) \
-({								\
-	unsigned int __i, __n;					\
-	int __ret = 0;						\
-	type *__entry;						\
-								\
-	for (__i = 0, __n = 0; __i < (size);			\
-	     __i += __entry->next_offset, __n++) { 		\
-		__entry = (void *)(entries) + __i;		\
-		if (__n < n)					\
-			continue;				\
-								\
-		__ret = fn(__entry , ## args);			\
-		if (__ret != 0)					\
-			break;					\
-	}							\
-	__ret;							\
-})
-
-/* fn returns 0 to continue iteration */
-#define XT_ENTRY_ITERATE(type, entries, size, fn, args...) \
-	XT_ENTRY_ITERATE_CONTINUE(type, entries, size, 0, fn, args)
-
-#endif /* !__KERNEL__ */
-
-/* pos is normally a struct ipt_entry/ip6t_entry/etc. */
-#define xt_entry_foreach(pos, ehead, esize) \
-	for ((pos) = (typeof(pos))(ehead); \
-	     (pos) < (typeof(pos))((char *)(ehead) + (esize)); \
-	     (pos) = (typeof(pos))((char *)(pos) + (pos)->next_offset))
-
-/* can only be xt_entry_match, so no use of typeof here */
-#define xt_ematch_foreach(pos, entry) \
-	for ((pos) = (struct xt_entry_match *)entry->elems; \
-	     (pos) < (struct xt_entry_match *)((char *)(entry) + \
-	             (entry)->target_offset); \
-	     (pos) = (struct xt_entry_match *)((char *)(pos) + \
-	             (pos)->u.match_size))
-
-#ifdef __KERNEL__
-
-#include <linux/netdevice.h>
-
-/**
- * struct xt_action_param - parameters for matches/targets
- *
- * @match:	the match extension
- * @target:	the target extension
- * @matchinfo:	per-match data
- * @targetinfo:	per-target data
- * @in:		input netdevice
- * @out:	output netdevice
- * @fragoff:	packet is a fragment, this is the data offset
- * @thoff:	position of transport header relative to skb->data
- * @hook:	hook number given packet came from
- * @family:	Actual NFPROTO_* through which the function is invoked
- * 		(helpful when match->family == NFPROTO_UNSPEC)
- *
- * Fields written to by extensions:
- *
- * @hotdrop:	drop packet if we had inspection problems
- * Network namespace obtainable using dev_net(in/out)
- */
-struct xt_action_param {
-	union {
-		const struct xt_match *match;
-		const struct xt_target *target;
-	};
-	union {
-		const void *matchinfo, *targinfo;
-	};
-	const struct net_device *in, *out;
-	int fragoff;
-	unsigned int thoff;
-	unsigned int hooknum;
-	u_int8_t family;
-	bool hotdrop;
-};
-
-/**
- * struct xt_mtchk_param - parameters for match extensions'
- * checkentry functions
- *
- * @net:	network namespace through which the check was invoked
- * @table:	table the rule is tried to be inserted into
- * @entryinfo:	the family-specific rule data
- * 		(struct ipt_ip, ip6t_ip, arpt_arp or (note) ebt_entry)
- * @match:	struct xt_match through which this function was invoked
- * @matchinfo:	per-match data
- * @hook_mask:	via which hooks the new rule is reachable
- * Other fields as above.
- */
-struct xt_mtchk_param {
-	struct net *net;
-	const char *table;
-	const void *entryinfo;
-	const struct xt_match *match;
-	void *matchinfo;
-	unsigned int hook_mask;
-	u_int8_t family;
-};
-
-/**
- * struct xt_mdtor_param - match destructor parameters
- * Fields as above.
- */
-struct xt_mtdtor_param {
-	struct net *net;
-	const struct xt_match *match;
-	void *matchinfo;
-	u_int8_t family;
-};
-
-/**
- * struct xt_tgchk_param - parameters for target extensions'
- * checkentry functions
- *
- * @entryinfo:	the family-specific rule data
- * 		(struct ipt_entry, ip6t_entry, arpt_entry, ebt_entry)
- *
- * Other fields see above.
- */
-struct xt_tgchk_param {
-	struct net *net;
-	const char *table;
-	const void *entryinfo;
-	const struct xt_target *target;
-	void *targinfo;
-	unsigned int hook_mask;
-	u_int8_t family;
-};
-
-/* Target destructor parameters */
-struct xt_tgdtor_param {
-	struct net *net;
-	const struct xt_target *target;
-	void *targinfo;
-	u_int8_t family;
-};
-
-struct xt_match {
-	struct list_head list;
-
-	const char name[XT_EXTENSION_MAXNAMELEN];
-	u_int8_t revision;
-
-	/* Return true or false: return FALSE and set *hotdrop = 1 to
-           force immediate packet drop. */
-	/* Arguments changed since 2.6.9, as this must now handle
-	   non-linear skb, using skb_header_pointer and
-	   skb_ip_make_writable. */
-	bool (*match)(const struct sk_buff *skb,
-		      struct xt_action_param *);
-
-	/* Called when user tries to insert an entry of this type. */
-	int (*checkentry)(const struct xt_mtchk_param *);
-
-	/* Called when entry of this type deleted. */
-	void (*destroy)(const struct xt_mtdtor_param *);
-#ifdef CONFIG_COMPAT
-	/* Called when userspace align differs from kernel space one */
-	void (*compat_from_user)(void *dst, const void *src);
-	int (*compat_to_user)(void __user *dst, const void *src);
-#endif
-	/* Set this to THIS_MODULE if you are a module, otherwise NULL */
-	struct module *me;
-
-	const char *table;
-	unsigned int matchsize;
-#ifdef CONFIG_COMPAT
-	unsigned int compatsize;
-#endif
-	unsigned int hooks;
-	unsigned short proto;
-
-	unsigned short family;
-};
-
-/* Registration hooks for targets. */
-struct xt_target {
-	struct list_head list;
-
-	const char name[XT_EXTENSION_MAXNAMELEN];
-	u_int8_t revision;
-
-	/* Returns verdict. Argument order changed since 2.6.9, as this
-	   must now handle non-linear skbs, using skb_copy_bits and
-	   skb_ip_make_writable. */
-	unsigned int (*target)(struct sk_buff *skb,
-			       const struct xt_action_param *);
-
-	/* Called when user tries to insert an entry of this type:
-           hook_mask is a bitmask of hooks from which it can be
-           called. */
-	/* Should return 0 on success or an error code otherwise (-Exxxx). */
-	int (*checkentry)(const struct xt_tgchk_param *);
-
-	/* Called when entry of this type deleted. */
-	void (*destroy)(const struct xt_tgdtor_param *);
-#ifdef CONFIG_COMPAT
-	/* Called when userspace align differs from kernel space one */
-	void (*compat_from_user)(void *dst, const void *src);
-	int (*compat_to_user)(void __user *dst, const void *src);
-#endif
-	/* Set this to THIS_MODULE if you are a module, otherwise NULL */
-	struct module *me;
-
-	const char *table;
-	unsigned int targetsize;
-#ifdef CONFIG_COMPAT
-	unsigned int compatsize;
-#endif
-	unsigned int hooks;
-	unsigned short proto;
-
-	unsigned short family;
-};
-
-/* Furniture shopping... */
-struct xt_table {
-	struct list_head list;
-
-	/* What hooks you will enter on */
-	unsigned int valid_hooks;
-
-	/* Man behind the curtain... */
-	struct xt_table_info *private;
-
-	/* Set this to THIS_MODULE if you are a module, otherwise NULL */
-	struct module *me;
-
-	u_int8_t af;		/* address/protocol family */
-	int priority;		/* hook order */
-
-	/* A unique name... */
-	const char name[XT_TABLE_MAXNAMELEN];
-};
-
-#include <linux/netfilter_ipv4.h>
-
-/* The table itself */
-struct xt_table_info {
-	/* Size per table */
-	unsigned int size;
-	/* Number of entries: FIXME. --RR */
-	unsigned int number;
-	/* Initial number of entries. Needed for module usage count */
-	unsigned int initial_entries;
-
-	/* Entry points and underflows */
-	unsigned int hook_entry[NF_INET_NUMHOOKS];
-	unsigned int underflow[NF_INET_NUMHOOKS];
-
-	/*
-	 * Number of user chains. Since tables cannot have loops, at most
-	 * @stacksize jumps (number of user chains) can possibly be made.
-	 */
-	unsigned int stacksize;
-	unsigned int __percpu *stackptr;
-	void ***jumpstack;
-	/* ipt_entry tables: one per CPU */
-	/* Note : this field MUST be the last one, see XT_TABLE_INFO_SZ */
-	void *entries[1];
-};
-
-#define XT_TABLE_INFO_SZ (offsetof(struct xt_table_info, entries) \
-			  + nr_cpu_ids * sizeof(char *))
-extern int xt_register_target(struct xt_target *target);
-extern void xt_unregister_target(struct xt_target *target);
-extern int xt_register_targets(struct xt_target *target, unsigned int n);
-extern void xt_unregister_targets(struct xt_target *target, unsigned int n);
-
-extern int xt_register_match(struct xt_match *target);
-extern void xt_unregister_match(struct xt_match *target);
-extern int xt_register_matches(struct xt_match *match, unsigned int n);
-extern void xt_unregister_matches(struct xt_match *match, unsigned int n);
-
-extern int xt_check_match(struct xt_mtchk_param *,
-			  unsigned int size, u_int8_t proto, bool inv_proto);
-extern int xt_check_target(struct xt_tgchk_param *,
-			   unsigned int size, u_int8_t proto, bool inv_proto);
-
-extern struct xt_table *xt_register_table(struct net *net,
-					  const struct xt_table *table,
-					  struct xt_table_info *bootstrap,
-					  struct xt_table_info *newinfo);
-extern void *xt_unregister_table(struct xt_table *table);
-
-extern struct xt_table_info *xt_replace_table(struct xt_table *table,
-					      unsigned int num_counters,
-					      struct xt_table_info *newinfo,
-					      int *error);
-
-extern struct xt_match *xt_find_match(u8 af, const char *name, u8 revision);
-extern struct xt_target *xt_find_target(u8 af, const char *name, u8 revision);
-extern struct xt_match *xt_request_find_match(u8 af, const char *name,
-					      u8 revision);
-extern struct xt_target *xt_request_find_target(u8 af, const char *name,
-						u8 revision);
-extern int xt_find_revision(u8 af, const char *name, u8 revision,
-			    int target, int *err);
-
-extern struct xt_table *xt_find_table_lock(struct net *net, u_int8_t af,
-					   const char *name);
-extern void xt_table_unlock(struct xt_table *t);
-
-extern int xt_proto_init(struct net *net, u_int8_t af);
-extern void xt_proto_fini(struct net *net, u_int8_t af);
-
-extern struct xt_table_info *xt_alloc_table_info(unsigned int size);
-extern void xt_free_table_info(struct xt_table_info *info);
-
-/**
- * xt_recseq - recursive seqcount for netfilter use
- * 
- * Packet processing changes the seqcount only if no recursion happened
- * get_counters() can use read_seqcount_begin()/read_seqcount_retry(),
- * because we use the normal seqcount convention :
- * Low order bit set to 1 if a writer is active.
- */
-DECLARE_PER_CPU(seqcount_t, xt_recseq);
-
-/**
- * xt_write_recseq_begin - start of a write section
- *
- * Begin packet processing : all readers must wait the end
- * 1) Must be called with preemption disabled
- * 2) softirqs must be disabled too (or we should use this_cpu_add())
- * Returns :
- *  1 if no recursion on this cpu
- *  0 if recursion detected
- */
-static inline unsigned int xt_write_recseq_begin(void)
-{
-	unsigned int addend;
-
-	/*
-	 * Low order bit of sequence is set if we already
-	 * called xt_write_recseq_begin().
-	 */
-	addend = (__this_cpu_read(xt_recseq.sequence) + 1) & 1;
-
-	/*
-	 * This is kind of a write_seqcount_begin(), but addend is 0 or 1
-	 * We dont check addend value to avoid a test and conditional jump,
-	 * since addend is most likely 1
-	 */
-	__this_cpu_add(xt_recseq.sequence, addend);
-	smp_wmb();
-
-	return addend;
-}
-
-/**
- * xt_write_recseq_end - end of a write section
- * @addend: return value from previous xt_write_recseq_begin()
- *
- * End packet processing : all readers can proceed
- * 1) Must be called with preemption disabled
- * 2) softirqs must be disabled too (or we should use this_cpu_add())
- */
-static inline void xt_write_recseq_end(unsigned int addend)
-{
-	/* this is kind of a write_seqcount_end(), but addend is 0 or 1 */
-	smp_wmb();
-	__this_cpu_add(xt_recseq.sequence, addend);
-}
-
-/*
- * This helper is performance critical and must be inlined
- */
-static inline unsigned long ifname_compare_aligned(const char *_a,
-						   const char *_b,
-						   const char *_mask)
-{
-	const unsigned long *a = (const unsigned long *)_a;
-	const unsigned long *b = (const unsigned long *)_b;
-	const unsigned long *mask = (const unsigned long *)_mask;
-	unsigned long ret;
-
-	ret = (a[0] ^ b[0]) & mask[0];
-	if (IFNAMSIZ > sizeof(unsigned long))
-		ret |= (a[1] ^ b[1]) & mask[1];
-	if (IFNAMSIZ > 2 * sizeof(unsigned long))
-		ret |= (a[2] ^ b[2]) & mask[2];
-	if (IFNAMSIZ > 3 * sizeof(unsigned long))
-		ret |= (a[3] ^ b[3]) & mask[3];
-	BUILD_BUG_ON(IFNAMSIZ > 4 * sizeof(unsigned long));
-	return ret;
-}
-
-extern struct nf_hook_ops *xt_hook_link(const struct xt_table *, nf_hookfn *);
-extern void xt_hook_unlink(const struct xt_table *, struct nf_hook_ops *);
-
-#ifdef CONFIG_COMPAT
-#include <net/compat.h>
-
-struct compat_xt_entry_match {
-	union {
-		struct {
-			u_int16_t match_size;
-			char name[XT_FUNCTION_MAXNAMELEN - 1];
-			u_int8_t revision;
-		} user;
-		struct {
-			u_int16_t match_size;
-			compat_uptr_t match;
-		} kernel;
-		u_int16_t match_size;
-	} u;
-	unsigned char data[0];
-};
-
-struct compat_xt_entry_target {
-	union {
-		struct {
-			u_int16_t target_size;
-			char name[XT_FUNCTION_MAXNAMELEN - 1];
-			u_int8_t revision;
-		} user;
-		struct {
-			u_int16_t target_size;
-			compat_uptr_t target;
-		} kernel;
-		u_int16_t target_size;
-	} u;
-	unsigned char data[0];
-};
-
-/* FIXME: this works only on 32 bit tasks
- * need to change whole approach in order to calculate align as function of
- * current task alignment */
-
-struct compat_xt_counters {
-	compat_u64 pcnt, bcnt;			/* Packet and byte counters */
-};
-
-struct compat_xt_counters_info {
-	char name[XT_TABLE_MAXNAMELEN];
-	compat_uint_t num_counters;
-	struct compat_xt_counters counters[0];
-};
-
-struct _compat_xt_align {
-	__u8 u8;
-	__u16 u16;
-	__u32 u32;
-	compat_u64 u64;
-};
-
-#define COMPAT_XT_ALIGN(s) __ALIGN_KERNEL((s), __alignof__(struct _compat_xt_align))
-
-extern void xt_compat_lock(u_int8_t af);
-extern void xt_compat_unlock(u_int8_t af);
-
-extern int xt_compat_add_offset(u_int8_t af, unsigned int offset, int delta);
-extern void xt_compat_flush_offsets(u_int8_t af);
-extern void xt_compat_init_offsets(u_int8_t af, unsigned int number);
-extern int xt_compat_calc_jump(u_int8_t af, unsigned int offset);
-
-extern int xt_compat_match_offset(const struct xt_match *match);
-extern int xt_compat_match_from_user(struct xt_entry_match *m,
-				     void **dstptr, unsigned int *size);
-extern int xt_compat_match_to_user(const struct xt_entry_match *m,
-				   void __user **dstptr, unsigned int *size);
-
-extern int xt_compat_target_offset(const struct xt_target *target);
-extern void xt_compat_target_from_user(struct xt_entry_target *t,
-				       void **dstptr, unsigned int *size);
-extern int xt_compat_target_to_user(const struct xt_entry_target *t,
-				    void __user **dstptr, unsigned int *size);
-
-#endif /* CONFIG_COMPAT */
-#endif /* __KERNEL__ */
-
-#endif /* _X_TABLES_H */
diff --git a/ANDROID_3.4.5/include/linux/netfilter/xt_AUDIT.h b/ANDROID_3.4.5/include/linux/netfilter/xt_AUDIT.h
deleted file mode 100644
index 38751d2e..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter/xt_AUDIT.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
- * Header file for iptables xt_AUDIT target
- *
- * (C) 2010-2011 Thomas Graf <tgraf@redhat.com>
- * (C) 2010-2011 Red Hat, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef _XT_AUDIT_TARGET_H
-#define _XT_AUDIT_TARGET_H
-
-#include <linux/types.h>
-
-enum {
-	XT_AUDIT_TYPE_ACCEPT = 0,
-	XT_AUDIT_TYPE_DROP,
-	XT_AUDIT_TYPE_REJECT,
-	__XT_AUDIT_TYPE_MAX,
-};
-
-#define XT_AUDIT_TYPE_MAX (__XT_AUDIT_TYPE_MAX - 1)
-
-struct xt_audit_info {
-	__u8 type; /* XT_AUDIT_TYPE_* */
-};
-
-#endif /* _XT_AUDIT_TARGET_H */
diff --git a/ANDROID_3.4.5/include/linux/netfilter/xt_CHECKSUM.h b/ANDROID_3.4.5/include/linux/netfilter/xt_CHECKSUM.h
deleted file mode 100644
index 9a2e4661..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter/xt_CHECKSUM.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/* Header file for iptables ipt_CHECKSUM target
- *
- * (C) 2002 by Harald Welte <laforge@gnumonks.org>
- * (C) 2010 Red Hat Inc
- * Author: Michael S. Tsirkin <mst@redhat.com>
- *
- * This software is distributed under GNU GPL v2, 1991
-*/
-#ifndef _XT_CHECKSUM_TARGET_H
-#define _XT_CHECKSUM_TARGET_H
-
-#include <linux/types.h>
-
-#define XT_CHECKSUM_OP_FILL	0x01	/* fill in checksum in IP header */
-
-struct xt_CHECKSUM_info {
-	__u8 operation;	/* bitset of operations */
-};
-
-#endif /* _XT_CHECKSUM_TARGET_H */
diff --git a/ANDROID_3.4.5/include/linux/netfilter/xt_CLASSIFY.h b/ANDROID_3.4.5/include/linux/netfilter/xt_CLASSIFY.h
deleted file mode 100644
index a813bf14..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter/xt_CLASSIFY.h
+++ /dev/null
@@ -1,10 +0,0 @@
-#ifndef _XT_CLASSIFY_H
-#define _XT_CLASSIFY_H
-
-#include <linux/types.h>
-
-struct xt_classify_target_info {
-	__u32 priority;
-};
-
-#endif /*_XT_CLASSIFY_H */
diff --git a/ANDROID_3.4.5/include/linux/netfilter/xt_CONNMARK.h b/ANDROID_3.4.5/include/linux/netfilter/xt_CONNMARK.h
deleted file mode 100644
index 2f2e48ec..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter/xt_CONNMARK.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _XT_CONNMARK_H_target
-#define _XT_CONNMARK_H_target
-
-#include <linux/netfilter/xt_connmark.h>
-
-#endif /*_XT_CONNMARK_H_target*/
diff --git a/ANDROID_3.4.5/include/linux/netfilter/xt_CONNSECMARK.h b/ANDROID_3.4.5/include/linux/netfilter/xt_CONNSECMARK.h
deleted file mode 100644
index b973ff80..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter/xt_CONNSECMARK.h
+++ /dev/null
@@ -1,15 +0,0 @@
-#ifndef _XT_CONNSECMARK_H_target
-#define _XT_CONNSECMARK_H_target
-
-#include <linux/types.h>
-
-enum {
-	CONNSECMARK_SAVE = 1,
-	CONNSECMARK_RESTORE,
-};
-
-struct xt_connsecmark_target_info {
-	__u8 mode;
-};
-
-#endif /*_XT_CONNSECMARK_H_target */
diff --git a/ANDROID_3.4.5/include/linux/netfilter/xt_CT.h b/ANDROID_3.4.5/include/linux/netfilter/xt_CT.h
deleted file mode 100644
index a064b8af..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter/xt_CT.h
+++ /dev/null
@@ -1,31 +0,0 @@
-#ifndef _XT_CT_H
-#define _XT_CT_H
-
-#include <linux/types.h>
-
-#define XT_CT_NOTRACK	0x1
-
-struct xt_ct_target_info {
-	__u16 flags;
-	__u16 zone;
-	__u32 ct_events;
-	__u32 exp_events;
-	char helper[16];
-
-	/* Used internally by the kernel */
-	struct nf_conn	*ct __attribute__((aligned(8)));
-};
-
-struct xt_ct_target_info_v1 {
-	__u16 flags;
-	__u16 zone;
-	__u32 ct_events;
-	__u32 exp_events;
-	char helper[16];
-	char timeout[32];
-
-	/* Used internally by the kernel */
-	struct nf_conn	*ct __attribute__((aligned(8)));
-};
-
-#endif /* _XT_CT_H */
diff --git a/ANDROID_3.4.5/include/linux/netfilter/xt_DSCP.h b/ANDROID_3.4.5/include/linux/netfilter/xt_DSCP.h
deleted file mode 100644
index 648e0b3b..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter/xt_DSCP.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/* x_tables module for setting the IPv4/IPv6 DSCP field
- *
- * (C) 2002 Harald Welte <laforge@gnumonks.org>
- * based on ipt_FTOS.c (C) 2000 by Matthew G. Marsh <mgm@paktronix.com>
- * This software is distributed under GNU GPL v2, 1991
- *
- * See RFC2474 for a description of the DSCP field within the IP Header.
- *
- * xt_DSCP.h,v 1.7 2002/03/14 12:03:13 laforge Exp
-*/
-#ifndef _XT_DSCP_TARGET_H
-#define _XT_DSCP_TARGET_H
-#include <linux/netfilter/xt_dscp.h>
-#include <linux/types.h>
-
-/* target info */
-struct xt_DSCP_info {
-	__u8 dscp;
-};
-
-struct xt_tos_target_info {
-	__u8 tos_value;
-	__u8 tos_mask;
-};
-
-#endif /* _XT_DSCP_TARGET_H */
diff --git a/ANDROID_3.4.5/include/linux/netfilter/xt_IDLETIMER.h b/ANDROID_3.4.5/include/linux/netfilter/xt_IDLETIMER.h
deleted file mode 100644
index faaa28b3..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter/xt_IDLETIMER.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- * linux/include/linux/netfilter/xt_IDLETIMER.h
- *
- * Header file for Xtables timer target module.
- *
- * Copyright (C) 2004, 2010 Nokia Corporation
- *
- * Written by Timo Teras <ext-timo.teras@nokia.com>
- *
- * Converted to x_tables and forward-ported to 2.6.34
- * by Luciano Coelho <luciano.coelho@nokia.com>
- *
- * Contact: Luciano Coelho <luciano.coelho@nokia.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- */
-
-#ifndef _XT_IDLETIMER_H
-#define _XT_IDLETIMER_H
-
-#include <linux/types.h>
-
-#define MAX_IDLETIMER_LABEL_SIZE 28
-#define NLMSG_MAX_SIZE 64
-
-#define NL_EVENT_TYPE_INACTIVE 0
-#define NL_EVENT_TYPE_ACTIVE 1
-
-struct idletimer_tg_info {
-	__u32 timeout;
-
-	char label[MAX_IDLETIMER_LABEL_SIZE];
-
-	/* Use netlink messages for notification in addition to sysfs */
-	__u8 send_nl_msg;
-
-	/* for kernel module internal use only */
-	struct idletimer_tg *timer __attribute__((aligned(8)));
-};
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/netfilter/xt_LED.h b/ANDROID_3.4.5/include/linux/netfilter/xt_LED.h
deleted file mode 100644
index f5509e75..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter/xt_LED.h
+++ /dev/null
@@ -1,15 +0,0 @@
-#ifndef _XT_LED_H
-#define _XT_LED_H
-
-#include <linux/types.h>
-
-struct xt_led_info {
-	char id[27];        /* Unique ID for this trigger in the LED class */
-	__u8 always_blink;  /* Blink even if the LED is already on */
-	__u32 delay;        /* Delay until LED is switched off after trigger */
-
-	/* Kernel data used in the module */
-	void *internal_data __attribute__((aligned(8)));
-};
-
-#endif /* _XT_LED_H */
diff --git a/ANDROID_3.4.5/include/linux/netfilter/xt_LOG.h b/ANDROID_3.4.5/include/linux/netfilter/xt_LOG.h
deleted file mode 100644
index cac07909..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter/xt_LOG.h
+++ /dev/null
@@ -1,19 +0,0 @@
-#ifndef _XT_LOG_H
-#define _XT_LOG_H
-
-/* make sure not to change this without changing nf_log.h:NF_LOG_* (!) */
-#define XT_LOG_TCPSEQ		0x01	/* Log TCP sequence numbers */
-#define XT_LOG_TCPOPT		0x02	/* Log TCP options */
-#define XT_LOG_IPOPT		0x04	/* Log IP options */
-#define XT_LOG_UID		0x08	/* Log UID owning local socket */
-#define XT_LOG_NFLOG		0x10	/* Unsupported, don't reuse */
-#define XT_LOG_MACDECODE	0x20	/* Decode MAC header */
-#define XT_LOG_MASK		0x2f
-
-struct xt_log_info {
-	unsigned char level;
-	unsigned char logflags;
-	char prefix[30];
-};
-
-#endif /* _XT_LOG_H */
diff --git a/ANDROID_3.4.5/include/linux/netfilter/xt_MARK.h b/ANDROID_3.4.5/include/linux/netfilter/xt_MARK.h
deleted file mode 100644
index 41c456de..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter/xt_MARK.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _XT_MARK_H_target
-#define _XT_MARK_H_target
-
-#include <linux/netfilter/xt_mark.h>
-
-#endif /*_XT_MARK_H_target */
diff --git a/ANDROID_3.4.5/include/linux/netfilter/xt_NFLOG.h b/ANDROID_3.4.5/include/linux/netfilter/xt_NFLOG.h
deleted file mode 100644
index 87b58311..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter/xt_NFLOG.h
+++ /dev/null
@@ -1,20 +0,0 @@
-#ifndef _XT_NFLOG_TARGET
-#define _XT_NFLOG_TARGET
-
-#include <linux/types.h>
-
-#define XT_NFLOG_DEFAULT_GROUP		0x1
-#define XT_NFLOG_DEFAULT_THRESHOLD	0
-
-#define XT_NFLOG_MASK			0x0
-
-struct xt_nflog_info {
-	__u32	len;
-	__u16	group;
-	__u16	threshold;
-	__u16	flags;
-	__u16	pad;
-	char		prefix[64];
-};
-
-#endif /* _XT_NFLOG_TARGET */
diff --git a/ANDROID_3.4.5/include/linux/netfilter/xt_NFQUEUE.h b/ANDROID_3.4.5/include/linux/netfilter/xt_NFQUEUE.h
deleted file mode 100644
index 9eafdbbb..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter/xt_NFQUEUE.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/* iptables module for using NFQUEUE mechanism
- *
- * (C) 2005 Harald Welte <laforge@netfilter.org>
- *
- * This software is distributed under GNU GPL v2, 1991
- * 
-*/
-#ifndef _XT_NFQ_TARGET_H
-#define _XT_NFQ_TARGET_H
-
-#include <linux/types.h>
-
-/* target info */
-struct xt_NFQ_info {
-	__u16 queuenum;
-};
-
-struct xt_NFQ_info_v1 {
-	__u16 queuenum;
-	__u16 queues_total;
-};
-
-struct xt_NFQ_info_v2 {
-	__u16 queuenum;
-	__u16 queues_total;
-	__u16 bypass;
-};
-
-#endif /* _XT_NFQ_TARGET_H */
diff --git a/ANDROID_3.4.5/include/linux/netfilter/xt_RATEEST.h b/ANDROID_3.4.5/include/linux/netfilter/xt_RATEEST.h
deleted file mode 100644
index 6605e20a..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter/xt_RATEEST.h
+++ /dev/null
@@ -1,15 +0,0 @@
-#ifndef _XT_RATEEST_TARGET_H
-#define _XT_RATEEST_TARGET_H
-
-#include <linux/types.h>
-
-struct xt_rateest_target_info {
-	char			name[IFNAMSIZ];
-	__s8			interval;
-	__u8		ewma_log;
-
-	/* Used internally by the kernel */
-	struct xt_rateest	*est __attribute__((aligned(8)));
-};
-
-#endif /* _XT_RATEEST_TARGET_H */
diff --git a/ANDROID_3.4.5/include/linux/netfilter/xt_SECMARK.h b/ANDROID_3.4.5/include/linux/netfilter/xt_SECMARK.h
deleted file mode 100644
index 989092bd..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter/xt_SECMARK.h
+++ /dev/null
@@ -1,22 +0,0 @@
-#ifndef _XT_SECMARK_H_target
-#define _XT_SECMARK_H_target
-
-#include <linux/types.h>
-
-/*
- * This is intended for use by various security subsystems (but not
- * at the same time).
- *
- * 'mode' refers to the specific security subsystem which the
- * packets are being marked for.
- */
-#define SECMARK_MODE_SEL	0x01		/* SELinux */
-#define SECMARK_SECCTX_MAX	256
-
-struct xt_secmark_target_info {
-	__u8 mode;
-	__u32 secid;
-	char secctx[SECMARK_SECCTX_MAX];
-};
-
-#endif /*_XT_SECMARK_H_target */
diff --git a/ANDROID_3.4.5/include/linux/netfilter/xt_TCPMSS.h b/ANDROID_3.4.5/include/linux/netfilter/xt_TCPMSS.h
deleted file mode 100644
index 9a6960af..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter/xt_TCPMSS.h
+++ /dev/null
@@ -1,12 +0,0 @@
-#ifndef _XT_TCPMSS_H
-#define _XT_TCPMSS_H
-
-#include <linux/types.h>
-
-struct xt_tcpmss_info {
-	__u16 mss;
-};
-
-#define XT_TCPMSS_CLAMP_PMTU 0xffff
-
-#endif /* _XT_TCPMSS_H */
diff --git a/ANDROID_3.4.5/include/linux/netfilter/xt_TCPOPTSTRIP.h b/ANDROID_3.4.5/include/linux/netfilter/xt_TCPOPTSTRIP.h
deleted file mode 100644
index 71573184..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter/xt_TCPOPTSTRIP.h
+++ /dev/null
@@ -1,15 +0,0 @@
-#ifndef _XT_TCPOPTSTRIP_H
-#define _XT_TCPOPTSTRIP_H
-
-#include <linux/types.h>
-
-#define tcpoptstrip_set_bit(bmap, idx) \
-	(bmap[(idx) >> 5] |= 1U << (idx & 31))
-#define tcpoptstrip_test_bit(bmap, idx) \
-	(((1U << (idx & 31)) & bmap[(idx) >> 5]) != 0)
-
-struct xt_tcpoptstrip_target_info {
-	__u32 strip_bmap[8];
-};
-
-#endif /* _XT_TCPOPTSTRIP_H */
diff --git a/ANDROID_3.4.5/include/linux/netfilter/xt_TEE.h b/ANDROID_3.4.5/include/linux/netfilter/xt_TEE.h
deleted file mode 100644
index 5c21d5c8..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter/xt_TEE.h
+++ /dev/null
@@ -1,12 +0,0 @@
-#ifndef _XT_TEE_TARGET_H
-#define _XT_TEE_TARGET_H
-
-struct xt_tee_tginfo {
-	union nf_inet_addr gw;
-	char oif[16];
-
-	/* used internally by the kernel */
-	struct xt_tee_priv *priv __attribute__((aligned(8)));
-};
-
-#endif /* _XT_TEE_TARGET_H */
diff --git a/ANDROID_3.4.5/include/linux/netfilter/xt_TPROXY.h b/ANDROID_3.4.5/include/linux/netfilter/xt_TPROXY.h
deleted file mode 100644
index 902043c2..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter/xt_TPROXY.h
+++ /dev/null
@@ -1,23 +0,0 @@
-#ifndef _XT_TPROXY_H
-#define _XT_TPROXY_H
-
-#include <linux/types.h>
-
-/* TPROXY target is capable of marking the packet to perform
- * redirection. We can get rid of that whenever we get support for
- * mutliple targets in the same rule. */
-struct xt_tproxy_target_info {
-	__u32 mark_mask;
-	__u32 mark_value;
-	__be32 laddr;
-	__be16 lport;
-};
-
-struct xt_tproxy_target_info_v1 {
-	__u32 mark_mask;
-	__u32 mark_value;
-	union nf_inet_addr laddr;
-	__be16 lport;
-};
-
-#endif /* _XT_TPROXY_H */
diff --git a/ANDROID_3.4.5/include/linux/netfilter/xt_addrtype.h b/ANDROID_3.4.5/include/linux/netfilter/xt_addrtype.h
deleted file mode 100644
index b156baa9..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter/xt_addrtype.h
+++ /dev/null
@@ -1,44 +0,0 @@
-#ifndef _XT_ADDRTYPE_H
-#define _XT_ADDRTYPE_H
-
-#include <linux/types.h>
-
-enum {
-	XT_ADDRTYPE_INVERT_SOURCE	= 0x0001,
-	XT_ADDRTYPE_INVERT_DEST		= 0x0002,
-	XT_ADDRTYPE_LIMIT_IFACE_IN	= 0x0004,
-	XT_ADDRTYPE_LIMIT_IFACE_OUT	= 0x0008,
-};
-
-
-/* rtn_type enum values from rtnetlink.h, but shifted */
-enum {
-	XT_ADDRTYPE_UNSPEC = 1 << 0,
-	XT_ADDRTYPE_UNICAST = 1 << 1,	/* 1 << RTN_UNICAST */
-	XT_ADDRTYPE_LOCAL  = 1 << 2,	/* 1 << RTN_LOCAL, etc */
-	XT_ADDRTYPE_BROADCAST = 1 << 3,
-	XT_ADDRTYPE_ANYCAST = 1 << 4,
-	XT_ADDRTYPE_MULTICAST = 1 << 5,
-	XT_ADDRTYPE_BLACKHOLE = 1 << 6,
-	XT_ADDRTYPE_UNREACHABLE = 1 << 7,
-	XT_ADDRTYPE_PROHIBIT = 1 << 8,
-	XT_ADDRTYPE_THROW = 1 << 9,
-	XT_ADDRTYPE_NAT = 1 << 10,
-	XT_ADDRTYPE_XRESOLVE = 1 << 11,
-};
-
-struct xt_addrtype_info_v1 {
-	__u16	source;		/* source-type mask */
-	__u16	dest;		/* dest-type mask */
-	__u32	flags;
-};
-
-/* revision 0 */
-struct xt_addrtype_info {
-	__u16	source;		/* source-type mask */
-	__u16	dest;		/* dest-type mask */
-	__u32	invert_source;
-	__u32	invert_dest;
-};
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/netfilter/xt_cluster.h b/ANDROID_3.4.5/include/linux/netfilter/xt_cluster.h
deleted file mode 100644
index 9b883c8f..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter/xt_cluster.h
+++ /dev/null
@@ -1,19 +0,0 @@
-#ifndef _XT_CLUSTER_MATCH_H
-#define _XT_CLUSTER_MATCH_H
-
-#include <linux/types.h>
-
-enum xt_cluster_flags {
-	XT_CLUSTER_F_INV	= (1 << 0)
-};
-
-struct xt_cluster_match_info {
-	__u32 total_nodes;
-	__u32 node_mask;
-	__u32 hash_seed;
-	__u32 flags;
-};
-
-#define XT_CLUSTER_NODES_MAX	32
-
-#endif /* _XT_CLUSTER_MATCH_H */
diff --git a/ANDROID_3.4.5/include/linux/netfilter/xt_comment.h b/ANDROID_3.4.5/include/linux/netfilter/xt_comment.h
deleted file mode 100644
index 0ea5e79f..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter/xt_comment.h
+++ /dev/null
@@ -1,10 +0,0 @@
-#ifndef _XT_COMMENT_H
-#define _XT_COMMENT_H
-
-#define XT_MAX_COMMENT_LEN 256
-
-struct xt_comment_info {
-	char comment[XT_MAX_COMMENT_LEN];
-};
-
-#endif /* XT_COMMENT_H */
diff --git a/ANDROID_3.4.5/include/linux/netfilter/xt_connbytes.h b/ANDROID_3.4.5/include/linux/netfilter/xt_connbytes.h
deleted file mode 100644
index f1d6c15b..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter/xt_connbytes.h
+++ /dev/null
@@ -1,26 +0,0 @@
-#ifndef _XT_CONNBYTES_H
-#define _XT_CONNBYTES_H
-
-#include <linux/types.h>
-
-enum xt_connbytes_what {
-	XT_CONNBYTES_PKTS,
-	XT_CONNBYTES_BYTES,
-	XT_CONNBYTES_AVGPKT,
-};
-
-enum xt_connbytes_direction {
-	XT_CONNBYTES_DIR_ORIGINAL,
-	XT_CONNBYTES_DIR_REPLY,
-	XT_CONNBYTES_DIR_BOTH,
-};
-
-struct xt_connbytes_info {
-	struct {
-		__aligned_u64 from;	/* count to be matched */
-		__aligned_u64 to;	/* count to be matched */
-	} count;
-	__u8 what;		/* ipt_connbytes_what */
-	__u8 direction;	/* ipt_connbytes_direction */
-};
-#endif
diff --git a/ANDROID_3.4.5/include/linux/netfilter/xt_connlimit.h b/ANDROID_3.4.5/include/linux/netfilter/xt_connlimit.h
deleted file mode 100644
index d1366f05..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter/xt_connlimit.h
+++ /dev/null
@@ -1,37 +0,0 @@
-#ifndef _XT_CONNLIMIT_H
-#define _XT_CONNLIMIT_H
-
-#include <linux/types.h>
-#include <linux/netfilter.h>
-
-struct xt_connlimit_data;
-
-enum {
-	XT_CONNLIMIT_INVERT = 1 << 0,
-	XT_CONNLIMIT_DADDR  = 1 << 1,
-};
-
-struct xt_connlimit_info {
-	union {
-		union nf_inet_addr mask;
-#ifndef __KERNEL__
-		union {
-			__be32 v4_mask;
-			__be32 v6_mask[4];
-		};
-#endif
-	};
-	unsigned int limit;
-	union {
-		/* revision 0 */
-		unsigned int inverse;
-
-		/* revision 1 */
-		__u32 flags;
-	};
-
-	/* Used internally by the kernel */
-	struct xt_connlimit_data *data __attribute__((aligned(8)));
-};
-
-#endif /* _XT_CONNLIMIT_H */
diff --git a/ANDROID_3.4.5/include/linux/netfilter/xt_connmark.h b/ANDROID_3.4.5/include/linux/netfilter/xt_connmark.h
deleted file mode 100644
index efc17a83..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter/xt_connmark.h
+++ /dev/null
@@ -1,31 +0,0 @@
-#ifndef _XT_CONNMARK_H
-#define _XT_CONNMARK_H
-
-#include <linux/types.h>
-
-/* Copyright (C) 2002,2004 MARA Systems AB <http://www.marasystems.com>
- * by Henrik Nordstrom <hno@marasystems.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-enum {
-	XT_CONNMARK_SET = 0,
-	XT_CONNMARK_SAVE,
-	XT_CONNMARK_RESTORE
-};
-
-struct xt_connmark_tginfo1 {
-	__u32 ctmark, ctmask, nfmask;
-	__u8 mode;
-};
-
-struct xt_connmark_mtinfo1 {
-	__u32 mark, mask;
-	__u8 invert;
-};
-
-#endif /*_XT_CONNMARK_H*/
diff --git a/ANDROID_3.4.5/include/linux/netfilter/xt_conntrack.h b/ANDROID_3.4.5/include/linux/netfilter/xt_conntrack.h
deleted file mode 100644
index e3c041d5..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter/xt_conntrack.h
+++ /dev/null
@@ -1,77 +0,0 @@
-/* Header file for kernel module to match connection tracking information.
- * GPL (C) 2001  Marc Boucher (marc@mbsi.ca).
- */
-
-#ifndef _XT_CONNTRACK_H
-#define _XT_CONNTRACK_H
-
-#include <linux/types.h>
-#include <linux/netfilter.h>
-#include <linux/netfilter/nf_conntrack_tuple_common.h>
-
-#define XT_CONNTRACK_STATE_BIT(ctinfo) (1 << ((ctinfo)%IP_CT_IS_REPLY+1))
-#define XT_CONNTRACK_STATE_INVALID (1 << 0)
-
-#define XT_CONNTRACK_STATE_SNAT (1 << (IP_CT_NUMBER + 1))
-#define XT_CONNTRACK_STATE_DNAT (1 << (IP_CT_NUMBER + 2))
-#define XT_CONNTRACK_STATE_UNTRACKED (1 << (IP_CT_NUMBER + 3))
-
-/* flags, invflags: */
-enum {
-	XT_CONNTRACK_STATE        = 1 << 0,
-	XT_CONNTRACK_PROTO        = 1 << 1,
-	XT_CONNTRACK_ORIGSRC      = 1 << 2,
-	XT_CONNTRACK_ORIGDST      = 1 << 3,
-	XT_CONNTRACK_REPLSRC      = 1 << 4,
-	XT_CONNTRACK_REPLDST      = 1 << 5,
-	XT_CONNTRACK_STATUS       = 1 << 6,
-	XT_CONNTRACK_EXPIRES      = 1 << 7,
-	XT_CONNTRACK_ORIGSRC_PORT = 1 << 8,
-	XT_CONNTRACK_ORIGDST_PORT = 1 << 9,
-	XT_CONNTRACK_REPLSRC_PORT = 1 << 10,
-	XT_CONNTRACK_REPLDST_PORT = 1 << 11,
-	XT_CONNTRACK_DIRECTION    = 1 << 12,
-};
-
-struct xt_conntrack_mtinfo1 {
-	union nf_inet_addr origsrc_addr, origsrc_mask;
-	union nf_inet_addr origdst_addr, origdst_mask;
-	union nf_inet_addr replsrc_addr, replsrc_mask;
-	union nf_inet_addr repldst_addr, repldst_mask;
-	__u32 expires_min, expires_max;
-	__u16 l4proto;
-	__be16 origsrc_port, origdst_port;
-	__be16 replsrc_port, repldst_port;
-	__u16 match_flags, invert_flags;
-	__u8 state_mask, status_mask;
-};
-
-struct xt_conntrack_mtinfo2 {
-	union nf_inet_addr origsrc_addr, origsrc_mask;
-	union nf_inet_addr origdst_addr, origdst_mask;
-	union nf_inet_addr replsrc_addr, replsrc_mask;
-	union nf_inet_addr repldst_addr, repldst_mask;
-	__u32 expires_min, expires_max;
-	__u16 l4proto;
-	__be16 origsrc_port, origdst_port;
-	__be16 replsrc_port, repldst_port;
-	__u16 match_flags, invert_flags;
-	__u16 state_mask, status_mask;
-};
-
-struct xt_conntrack_mtinfo3 {
-	union nf_inet_addr origsrc_addr, origsrc_mask;
-	union nf_inet_addr origdst_addr, origdst_mask;
-	union nf_inet_addr replsrc_addr, replsrc_mask;
-	union nf_inet_addr repldst_addr, repldst_mask;
-	__u32 expires_min, expires_max;
-	__u16 l4proto;
-	__u16 origsrc_port, origdst_port;
-	__u16 replsrc_port, repldst_port;
-	__u16 match_flags, invert_flags;
-	__u16 state_mask, status_mask;
-	__u16 origsrc_port_high, origdst_port_high;
-	__u16 replsrc_port_high, repldst_port_high;
-};
-
-#endif /*_XT_CONNTRACK_H*/
diff --git a/ANDROID_3.4.5/include/linux/netfilter/xt_cpu.h b/ANDROID_3.4.5/include/linux/netfilter/xt_cpu.h
deleted file mode 100644
index 93c7f11d..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter/xt_cpu.h
+++ /dev/null
@@ -1,11 +0,0 @@
-#ifndef _XT_CPU_H
-#define _XT_CPU_H
-
-#include <linux/types.h>
-
-struct xt_cpu_info {
-	__u32	cpu;
-	__u32	invert;
-};
-
-#endif /*_XT_CPU_H*/
diff --git a/ANDROID_3.4.5/include/linux/netfilter/xt_dccp.h b/ANDROID_3.4.5/include/linux/netfilter/xt_dccp.h
deleted file mode 100644
index a579e1b6..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter/xt_dccp.h
+++ /dev/null
@@ -1,25 +0,0 @@
-#ifndef _XT_DCCP_H_
-#define _XT_DCCP_H_
-
-#include <linux/types.h>
-
-#define XT_DCCP_SRC_PORTS	        0x01
-#define XT_DCCP_DEST_PORTS	        0x02
-#define XT_DCCP_TYPE			0x04
-#define XT_DCCP_OPTION			0x08
-
-#define XT_DCCP_VALID_FLAGS		0x0f
-
-struct xt_dccp_info {
-	__u16 dpts[2];  /* Min, Max */
-	__u16 spts[2];  /* Min, Max */
-
-	__u16 flags;
-	__u16 invflags;
-
-	__u16 typemask;
-	__u8 option;
-};
-
-#endif /* _XT_DCCP_H_ */
-
diff --git a/ANDROID_3.4.5/include/linux/netfilter/xt_devgroup.h b/ANDROID_3.4.5/include/linux/netfilter/xt_devgroup.h
deleted file mode 100644
index 1babde0e..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter/xt_devgroup.h
+++ /dev/null
@@ -1,21 +0,0 @@
-#ifndef _XT_DEVGROUP_H
-#define _XT_DEVGROUP_H
-
-#include <linux/types.h>
-
-enum xt_devgroup_flags {
-	XT_DEVGROUP_MATCH_SRC	= 0x1,
-	XT_DEVGROUP_INVERT_SRC	= 0x2,
-	XT_DEVGROUP_MATCH_DST	= 0x4,
-	XT_DEVGROUP_INVERT_DST	= 0x8,
-};
-
-struct xt_devgroup_info {
-	__u32	flags;
-	__u32	src_group;
-	__u32	src_mask;
-	__u32	dst_group;
-	__u32	dst_mask;
-};
-
-#endif /* _XT_DEVGROUP_H */
diff --git a/ANDROID_3.4.5/include/linux/netfilter/xt_dscp.h b/ANDROID_3.4.5/include/linux/netfilter/xt_dscp.h
deleted file mode 100644
index 15f8932a..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter/xt_dscp.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/* x_tables module for matching the IPv4/IPv6 DSCP field
- *
- * (C) 2002 Harald Welte <laforge@gnumonks.org>
- * This software is distributed under GNU GPL v2, 1991
- *
- * See RFC2474 for a description of the DSCP field within the IP Header.
- *
- * xt_dscp.h,v 1.3 2002/08/05 19:00:21 laforge Exp
-*/
-#ifndef _XT_DSCP_H
-#define _XT_DSCP_H
-
-#include <linux/types.h>
-
-#define XT_DSCP_MASK	0xfc	/* 11111100 */
-#define XT_DSCP_SHIFT	2
-#define XT_DSCP_MAX	0x3f	/* 00111111 */
-
-/* match info */
-struct xt_dscp_info {
-	__u8 dscp;
-	__u8 invert;
-};
-
-struct xt_tos_match_info {
-	__u8 tos_mask;
-	__u8 tos_value;
-	__u8 invert;
-};
-
-#endif /* _XT_DSCP_H */
diff --git a/ANDROID_3.4.5/include/linux/netfilter/xt_ecn.h b/ANDROID_3.4.5/include/linux/netfilter/xt_ecn.h
deleted file mode 100644
index 7158fca3..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter/xt_ecn.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/* iptables module for matching the ECN header in IPv4 and TCP header
- *
- * (C) 2002 Harald Welte <laforge@gnumonks.org>
- *
- * This software is distributed under GNU GPL v2, 1991
- * 
- * ipt_ecn.h,v 1.4 2002/08/05 19:39:00 laforge Exp
-*/
-#ifndef _XT_ECN_H
-#define _XT_ECN_H
-
-#include <linux/types.h>
-#include <linux/netfilter/xt_dscp.h>
-
-#define XT_ECN_IP_MASK	(~XT_DSCP_MASK)
-
-#define XT_ECN_OP_MATCH_IP	0x01
-#define XT_ECN_OP_MATCH_ECE	0x10
-#define XT_ECN_OP_MATCH_CWR	0x20
-
-#define XT_ECN_OP_MATCH_MASK	0xce
-
-/* match info */
-struct xt_ecn_info {
-	__u8 operation;
-	__u8 invert;
-	__u8 ip_ect;
-	union {
-		struct {
-			__u8 ect;
-		} tcp;
-	} proto;
-};
-
-#endif /* _XT_ECN_H */
diff --git a/ANDROID_3.4.5/include/linux/netfilter/xt_esp.h b/ANDROID_3.4.5/include/linux/netfilter/xt_esp.h
deleted file mode 100644
index ee688240..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter/xt_esp.h
+++ /dev/null
@@ -1,15 +0,0 @@
-#ifndef _XT_ESP_H
-#define _XT_ESP_H
-
-#include <linux/types.h>
-
-struct xt_esp {
-	__u32 spis[2];	/* Security Parameter Index */
-	__u8  invflags;	/* Inverse flags */
-};
-
-/* Values for "invflags" field in struct xt_esp. */
-#define XT_ESP_INV_SPI	0x01	/* Invert the sense of spi. */
-#define XT_ESP_INV_MASK	0x01	/* All possible flags. */
-
-#endif /*_XT_ESP_H*/
diff --git a/ANDROID_3.4.5/include/linux/netfilter/xt_hashlimit.h b/ANDROID_3.4.5/include/linux/netfilter/xt_hashlimit.h
deleted file mode 100644
index b1925b59..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter/xt_hashlimit.h
+++ /dev/null
@@ -1,68 +0,0 @@
-#ifndef _XT_HASHLIMIT_H
-#define _XT_HASHLIMIT_H
-
-#include <linux/types.h>
-
-/* timings are in milliseconds. */
-#define XT_HASHLIMIT_SCALE 10000
-/* 1/10,000 sec period => max of 10,000/sec.  Min rate is then 429490
-   seconds, or one every 59 hours. */
-
-/* details of this structure hidden by the implementation */
-struct xt_hashlimit_htable;
-
-enum {
-	XT_HASHLIMIT_HASH_DIP = 1 << 0,
-	XT_HASHLIMIT_HASH_DPT = 1 << 1,
-	XT_HASHLIMIT_HASH_SIP = 1 << 2,
-	XT_HASHLIMIT_HASH_SPT = 1 << 3,
-	XT_HASHLIMIT_INVERT   = 1 << 4,
-};
-
-struct hashlimit_cfg {
-	__u32 mode;	  /* bitmask of XT_HASHLIMIT_HASH_* */
-	__u32 avg;    /* Average secs between packets * scale */
-	__u32 burst;  /* Period multiplier for upper limit. */
-
-	/* user specified */
-	__u32 size;		/* how many buckets */
-	__u32 max;		/* max number of entries */
-	__u32 gc_interval;	/* gc interval */
-	__u32 expire;	/* when do entries expire? */
-};
-
-struct xt_hashlimit_info {
-	char name [IFNAMSIZ];		/* name */
-	struct hashlimit_cfg cfg;
-
-	/* Used internally by the kernel */
-	struct xt_hashlimit_htable *hinfo;
-	union {
-		void *ptr;
-		struct xt_hashlimit_info *master;
-	} u;
-};
-
-struct hashlimit_cfg1 {
-	__u32 mode;	  /* bitmask of XT_HASHLIMIT_HASH_* */
-	__u32 avg;    /* Average secs between packets * scale */
-	__u32 burst;  /* Period multiplier for upper limit. */
-
-	/* user specified */
-	__u32 size;		/* how many buckets */
-	__u32 max;		/* max number of entries */
-	__u32 gc_interval;	/* gc interval */
-	__u32 expire;	/* when do entries expire? */
-
-	__u8 srcmask, dstmask;
-};
-
-struct xt_hashlimit_mtinfo1 {
-	char name[IFNAMSIZ];
-	struct hashlimit_cfg1 cfg;
-
-	/* Used internally by the kernel */
-	struct xt_hashlimit_htable *hinfo __attribute__((aligned(8)));
-};
-
-#endif /*_XT_HASHLIMIT_H*/
diff --git a/ANDROID_3.4.5/include/linux/netfilter/xt_helper.h b/ANDROID_3.4.5/include/linux/netfilter/xt_helper.h
deleted file mode 100644
index 6b42763f..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter/xt_helper.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef _XT_HELPER_H
-#define _XT_HELPER_H
-
-struct xt_helper_info {
-	int invert;
-	char name[30];
-};
-#endif /* _XT_HELPER_H */
diff --git a/ANDROID_3.4.5/include/linux/netfilter/xt_iprange.h b/ANDROID_3.4.5/include/linux/netfilter/xt_iprange.h
deleted file mode 100644
index 25fd7cf8..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter/xt_iprange.h
+++ /dev/null
@@ -1,20 +0,0 @@
-#ifndef _LINUX_NETFILTER_XT_IPRANGE_H
-#define _LINUX_NETFILTER_XT_IPRANGE_H 1
-
-#include <linux/types.h>
-#include <linux/netfilter.h>
-
-enum {
-	IPRANGE_SRC     = 1 << 0,	/* match source IP address */
-	IPRANGE_DST     = 1 << 1,	/* match destination IP address */
-	IPRANGE_SRC_INV = 1 << 4,	/* negate the condition */
-	IPRANGE_DST_INV = 1 << 5,	/* -"- */
-};
-
-struct xt_iprange_mtinfo {
-	union nf_inet_addr src_min, src_max;
-	union nf_inet_addr dst_min, dst_max;
-	__u8 flags;
-};
-
-#endif /* _LINUX_NETFILTER_XT_IPRANGE_H */
diff --git a/ANDROID_3.4.5/include/linux/netfilter/xt_ipvs.h b/ANDROID_3.4.5/include/linux/netfilter/xt_ipvs.h
deleted file mode 100644
index eff34ac1..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter/xt_ipvs.h
+++ /dev/null
@@ -1,29 +0,0 @@
-#ifndef _XT_IPVS_H
-#define _XT_IPVS_H
-
-#include <linux/types.h>
-
-enum {
-	XT_IPVS_IPVS_PROPERTY =	1 << 0, /* all other options imply this one */
-	XT_IPVS_PROTO =		1 << 1,
-	XT_IPVS_VADDR =		1 << 2,
-	XT_IPVS_VPORT =		1 << 3,
-	XT_IPVS_DIR =		1 << 4,
-	XT_IPVS_METHOD =	1 << 5,
-	XT_IPVS_VPORTCTL =	1 << 6,
-	XT_IPVS_MASK =		(1 << 7) - 1,
-	XT_IPVS_ONCE_MASK =	XT_IPVS_MASK & ~XT_IPVS_IPVS_PROPERTY
-};
-
-struct xt_ipvs_mtinfo {
-	union nf_inet_addr	vaddr, vmask;
-	__be16			vport;
-	__u8			l4proto;
-	__u8			fwd_method;
-	__be16			vportctl;
-
-	__u8			invert;
-	__u8			bitmask;
-};
-
-#endif /* _XT_IPVS_H */
diff --git a/ANDROID_3.4.5/include/linux/netfilter/xt_length.h b/ANDROID_3.4.5/include/linux/netfilter/xt_length.h
deleted file mode 100644
index b82ed7c4..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter/xt_length.h
+++ /dev/null
@@ -1,11 +0,0 @@
-#ifndef _XT_LENGTH_H
-#define _XT_LENGTH_H
-
-#include <linux/types.h>
-
-struct xt_length_info {
-    __u16	min, max;
-    __u8	invert;
-};
-
-#endif /*_XT_LENGTH_H*/
diff --git a/ANDROID_3.4.5/include/linux/netfilter/xt_limit.h b/ANDROID_3.4.5/include/linux/netfilter/xt_limit.h
deleted file mode 100644
index bb47fc4d..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter/xt_limit.h
+++ /dev/null
@@ -1,24 +0,0 @@
-#ifndef _XT_RATE_H
-#define _XT_RATE_H
-
-#include <linux/types.h>
-
-/* timings are in milliseconds. */
-#define XT_LIMIT_SCALE 10000
-
-struct xt_limit_priv;
-
-/* 1/10,000 sec period => max of 10,000/sec.  Min rate is then 429490
-   seconds, or one every 59 hours. */
-struct xt_rateinfo {
-	__u32 avg;    /* Average secs between packets * scale */
-	__u32 burst;  /* Period multiplier for upper limit. */
-
-	/* Used internally by the kernel */
-	unsigned long prev; /* moved to xt_limit_priv */
-	__u32 credit; /* moved to xt_limit_priv */
-	__u32 credit_cap, cost;
-
-	struct xt_limit_priv *master;
-};
-#endif /*_XT_RATE_H*/
diff --git a/ANDROID_3.4.5/include/linux/netfilter/xt_mac.h b/ANDROID_3.4.5/include/linux/netfilter/xt_mac.h
deleted file mode 100644
index b892cdc6..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter/xt_mac.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef _XT_MAC_H
-#define _XT_MAC_H
-
-struct xt_mac_info {
-    unsigned char srcaddr[ETH_ALEN];
-    int invert;
-};
-#endif /*_XT_MAC_H*/
diff --git a/ANDROID_3.4.5/include/linux/netfilter/xt_mark.h b/ANDROID_3.4.5/include/linux/netfilter/xt_mark.h
deleted file mode 100644
index ecadc40d..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter/xt_mark.h
+++ /dev/null
@@ -1,15 +0,0 @@
-#ifndef _XT_MARK_H
-#define _XT_MARK_H
-
-#include <linux/types.h>
-
-struct xt_mark_tginfo2 {
-	__u32 mark, mask;
-};
-
-struct xt_mark_mtinfo1 {
-	__u32 mark, mask;
-	__u8 invert;
-};
-
-#endif /*_XT_MARK_H*/
diff --git a/ANDROID_3.4.5/include/linux/netfilter/xt_multiport.h b/ANDROID_3.4.5/include/linux/netfilter/xt_multiport.h
deleted file mode 100644
index 5b7e72df..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter/xt_multiport.h
+++ /dev/null
@@ -1,29 +0,0 @@
-#ifndef _XT_MULTIPORT_H
-#define _XT_MULTIPORT_H
-
-#include <linux/types.h>
-
-enum xt_multiport_flags {
-	XT_MULTIPORT_SOURCE,
-	XT_MULTIPORT_DESTINATION,
-	XT_MULTIPORT_EITHER
-};
-
-#define XT_MULTI_PORTS	15
-
-/* Must fit inside union xt_matchinfo: 16 bytes */
-struct xt_multiport {
-	__u8 flags;				/* Type of comparison */
-	__u8 count;				/* Number of ports */
-	__u16 ports[XT_MULTI_PORTS];	/* Ports */
-};
-
-struct xt_multiport_v1 {
-	__u8 flags;				/* Type of comparison */
-	__u8 count;				/* Number of ports */
-	__u16 ports[XT_MULTI_PORTS];	/* Ports */
-	__u8 pflags[XT_MULTI_PORTS];	/* Port flags */
-	__u8 invert;			/* Invert flag */
-};
-
-#endif /*_XT_MULTIPORT_H*/
diff --git a/ANDROID_3.4.5/include/linux/netfilter/xt_nfacct.h b/ANDROID_3.4.5/include/linux/netfilter/xt_nfacct.h
deleted file mode 100644
index 3e19c8a8..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter/xt_nfacct.h
+++ /dev/null
@@ -1,13 +0,0 @@
-#ifndef _XT_NFACCT_MATCH_H
-#define _XT_NFACCT_MATCH_H
-
-#include <linux/netfilter/nfnetlink_acct.h>
-
-struct nf_acct;
-
-struct xt_nfacct_match_info {
-	char		name[NFACCT_NAME_MAX];
-	struct nf_acct	*nfacct;
-};
-
-#endif /* _XT_NFACCT_MATCH_H */
diff --git a/ANDROID_3.4.5/include/linux/netfilter/xt_osf.h b/ANDROID_3.4.5/include/linux/netfilter/xt_osf.h
deleted file mode 100644
index 18afa495..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter/xt_osf.h
+++ /dev/null
@@ -1,135 +0,0 @@
-/*
- * Copyright (c) 2003+ Evgeniy Polyakov <johnpol@2ka.mxt.ru>
- *
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#ifndef _XT_OSF_H
-#define _XT_OSF_H
-
-#include <linux/types.h>
-
-#define MAXGENRELEN		32
-
-#define XT_OSF_GENRE		(1<<0)
-#define	XT_OSF_TTL		(1<<1)
-#define XT_OSF_LOG		(1<<2)
-#define XT_OSF_INVERT		(1<<3)
-
-#define XT_OSF_LOGLEVEL_ALL	0	/* log all matched fingerprints */
-#define XT_OSF_LOGLEVEL_FIRST	1	/* log only the first matced fingerprint */
-#define XT_OSF_LOGLEVEL_ALL_KNOWN	2 /* do not log unknown packets */
-
-#define XT_OSF_TTL_TRUE		0	/* True ip and fingerprint TTL comparison */
-#define XT_OSF_TTL_LESS		1	/* Check if ip TTL is less than fingerprint one */
-#define XT_OSF_TTL_NOCHECK	2	/* Do not compare ip and fingerprint TTL at all */
-
-struct xt_osf_info {
-	char			genre[MAXGENRELEN];
-	__u32			len;
-	__u32			flags;
-	__u32			loglevel;
-	__u32			ttl;
-};
-
-/*
- * Wildcard MSS (kind of).
- * It is used to implement a state machine for the different wildcard values
- * of the MSS and window sizes.
- */
-struct xt_osf_wc {
-	__u32			wc;
-	__u32			val;
-};
-
-/*
- * This struct represents IANA options
- * http://www.iana.org/assignments/tcp-parameters
- */
-struct xt_osf_opt {
-	__u16			kind, length;
-	struct xt_osf_wc	wc;
-};
-
-struct xt_osf_user_finger {
-	struct xt_osf_wc	wss;
-
-	__u8			ttl, df;
-	__u16			ss, mss;
-	__u16			opt_num;
-
-	char			genre[MAXGENRELEN];
-	char			version[MAXGENRELEN];
-	char			subtype[MAXGENRELEN];
-
-	/* MAX_IPOPTLEN is maximum if all options are NOPs or EOLs */
-	struct xt_osf_opt	opt[MAX_IPOPTLEN];
-};
-
-struct xt_osf_nlmsg {
-	struct xt_osf_user_finger	f;
-	struct iphdr		ip;
-	struct tcphdr		tcp;
-};
-
-/* Defines for IANA option kinds */
-
-enum iana_options {
-	OSFOPT_EOL = 0,		/* End of options */
-	OSFOPT_NOP, 		/* NOP */
-	OSFOPT_MSS, 		/* Maximum segment size */
-	OSFOPT_WSO, 		/* Window scale option */
-	OSFOPT_SACKP,		/* SACK permitted */
-	OSFOPT_SACK,		/* SACK */
-	OSFOPT_ECHO,
-	OSFOPT_ECHOREPLY,
-	OSFOPT_TS,		/* Timestamp option */
-	OSFOPT_POCP,		/* Partial Order Connection Permitted */
-	OSFOPT_POSP,		/* Partial Order Service Profile */
-
-	/* Others are not used in the current OSF */
-	OSFOPT_EMPTY = 255,
-};
-
-/*
- * Initial window size option state machine: multiple of mss, mtu or
- * plain numeric value. Can also be made as plain numeric value which
- * is not a multiple of specified value.
- */
-enum xt_osf_window_size_options {
-	OSF_WSS_PLAIN	= 0,
-	OSF_WSS_MSS,
-	OSF_WSS_MTU,
-	OSF_WSS_MODULO,
-	OSF_WSS_MAX,
-};
-
-/*
- * Add/remove fingerprint from the kernel.
- */
-enum xt_osf_msg_types {
-	OSF_MSG_ADD,
-	OSF_MSG_REMOVE,
-	OSF_MSG_MAX,
-};
-
-enum xt_osf_attr_type {
-	OSF_ATTR_UNSPEC,
-	OSF_ATTR_FINGER,
-	OSF_ATTR_MAX,
-};
-
-#endif				/* _XT_OSF_H */
diff --git a/ANDROID_3.4.5/include/linux/netfilter/xt_owner.h b/ANDROID_3.4.5/include/linux/netfilter/xt_owner.h
deleted file mode 100644
index 20817617..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter/xt_owner.h
+++ /dev/null
@@ -1,18 +0,0 @@
-#ifndef _XT_OWNER_MATCH_H
-#define _XT_OWNER_MATCH_H
-
-#include <linux/types.h>
-
-enum {
-	XT_OWNER_UID    = 1 << 0,
-	XT_OWNER_GID    = 1 << 1,
-	XT_OWNER_SOCKET = 1 << 2,
-};
-
-struct xt_owner_match_info {
-	__u32 uid_min, uid_max;
-	__u32 gid_min, gid_max;
-	__u8 match, invert;
-};
-
-#endif /* _XT_OWNER_MATCH_H */
diff --git a/ANDROID_3.4.5/include/linux/netfilter/xt_physdev.h b/ANDROID_3.4.5/include/linux/netfilter/xt_physdev.h
deleted file mode 100644
index 8555e399..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter/xt_physdev.h
+++ /dev/null
@@ -1,26 +0,0 @@
-#ifndef _XT_PHYSDEV_H
-#define _XT_PHYSDEV_H
-
-#include <linux/types.h>
-
-#ifdef __KERNEL__
-#include <linux/if.h>
-#endif
-
-#define XT_PHYSDEV_OP_IN		0x01
-#define XT_PHYSDEV_OP_OUT		0x02
-#define XT_PHYSDEV_OP_BRIDGED		0x04
-#define XT_PHYSDEV_OP_ISIN		0x08
-#define XT_PHYSDEV_OP_ISOUT		0x10
-#define XT_PHYSDEV_OP_MASK		(0x20 - 1)
-
-struct xt_physdev_info {
-	char physindev[IFNAMSIZ];
-	char in_mask[IFNAMSIZ];
-	char physoutdev[IFNAMSIZ];
-	char out_mask[IFNAMSIZ];
-	__u8 invert;
-	__u8 bitmask;
-};
-
-#endif /*_XT_PHYSDEV_H*/
diff --git a/ANDROID_3.4.5/include/linux/netfilter/xt_pkttype.h b/ANDROID_3.4.5/include/linux/netfilter/xt_pkttype.h
deleted file mode 100644
index f265cf52..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter/xt_pkttype.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef _XT_PKTTYPE_H
-#define _XT_PKTTYPE_H
-
-struct xt_pkttype_info {
-	int	pkttype;
-	int	invert;
-};
-#endif /*_XT_PKTTYPE_H*/
diff --git a/ANDROID_3.4.5/include/linux/netfilter/xt_policy.h b/ANDROID_3.4.5/include/linux/netfilter/xt_policy.h
deleted file mode 100644
index be8ead05..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter/xt_policy.h
+++ /dev/null
@@ -1,69 +0,0 @@
-#ifndef _XT_POLICY_H
-#define _XT_POLICY_H
-
-#include <linux/types.h>
-
-#define XT_POLICY_MAX_ELEM	4
-
-enum xt_policy_flags {
-	XT_POLICY_MATCH_IN	= 0x1,
-	XT_POLICY_MATCH_OUT	= 0x2,
-	XT_POLICY_MATCH_NONE	= 0x4,
-	XT_POLICY_MATCH_STRICT	= 0x8,
-};
-
-enum xt_policy_modes {
-	XT_POLICY_MODE_TRANSPORT,
-	XT_POLICY_MODE_TUNNEL
-};
-
-struct xt_policy_spec {
-	__u8	saddr:1,
-			daddr:1,
-			proto:1,
-			mode:1,
-			spi:1,
-			reqid:1;
-};
-
-#ifndef __KERNEL__
-union xt_policy_addr {
-	struct in_addr	a4;
-	struct in6_addr	a6;
-};
-#endif
-
-struct xt_policy_elem {
-	union {
-#ifdef __KERNEL__
-		struct {
-			union nf_inet_addr saddr;
-			union nf_inet_addr smask;
-			union nf_inet_addr daddr;
-			union nf_inet_addr dmask;
-		};
-#else
-		struct {
-			union xt_policy_addr saddr;
-			union xt_policy_addr smask;
-			union xt_policy_addr daddr;
-			union xt_policy_addr dmask;
-		};
-#endif
-	};
-	__be32			spi;
-	__u32		reqid;
-	__u8		proto;
-	__u8		mode;
-
-	struct xt_policy_spec	match;
-	struct xt_policy_spec	invert;
-};
-
-struct xt_policy_info {
-	struct xt_policy_elem pol[XT_POLICY_MAX_ELEM];
-	__u16 flags;
-	__u16 len;
-};
-
-#endif /* _XT_POLICY_H */
diff --git a/ANDROID_3.4.5/include/linux/netfilter/xt_qtaguid.h b/ANDROID_3.4.5/include/linux/netfilter/xt_qtaguid.h
deleted file mode 100644
index ca60fbde..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter/xt_qtaguid.h
+++ /dev/null
@@ -1,13 +0,0 @@
-#ifndef _XT_QTAGUID_MATCH_H
-#define _XT_QTAGUID_MATCH_H
-
-/* For now we just replace the xt_owner.
- * FIXME: make iptables aware of qtaguid. */
-#include <linux/netfilter/xt_owner.h>
-
-#define XT_QTAGUID_UID    XT_OWNER_UID
-#define XT_QTAGUID_GID    XT_OWNER_GID
-#define XT_QTAGUID_SOCKET XT_OWNER_SOCKET
-#define xt_qtaguid_match_info xt_owner_match_info
-
-#endif /* _XT_QTAGUID_MATCH_H */
diff --git a/ANDROID_3.4.5/include/linux/netfilter/xt_quota.h b/ANDROID_3.4.5/include/linux/netfilter/xt_quota.h
deleted file mode 100644
index 9314723f..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter/xt_quota.h
+++ /dev/null
@@ -1,22 +0,0 @@
-#ifndef _XT_QUOTA_H
-#define _XT_QUOTA_H
-
-#include <linux/types.h>
-
-enum xt_quota_flags {
-	XT_QUOTA_INVERT		= 0x1,
-};
-#define XT_QUOTA_MASK		0x1
-
-struct xt_quota_priv;
-
-struct xt_quota_info {
-	__u32 flags;
-	__u32 pad;
-	__aligned_u64 quota;
-
-	/* Used internally by the kernel */
-	struct xt_quota_priv	*master;
-};
-
-#endif /* _XT_QUOTA_H */
diff --git a/ANDROID_3.4.5/include/linux/netfilter/xt_quota2.h b/ANDROID_3.4.5/include/linux/netfilter/xt_quota2.h
deleted file mode 100644
index eadc6903..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter/xt_quota2.h
+++ /dev/null
@@ -1,25 +0,0 @@
-#ifndef _XT_QUOTA_H
-#define _XT_QUOTA_H
-
-enum xt_quota_flags {
-	XT_QUOTA_INVERT    = 1 << 0,
-	XT_QUOTA_GROW      = 1 << 1,
-	XT_QUOTA_PACKET    = 1 << 2,
-	XT_QUOTA_NO_CHANGE = 1 << 3,
-	XT_QUOTA_MASK      = 0x0F,
-};
-
-struct xt_quota_counter;
-
-struct xt_quota_mtinfo2 {
-	char name[15];
-	u_int8_t flags;
-
-	/* Comparison-invariant */
-	aligned_u64 quota;
-
-	/* Used internally by the kernel */
-	struct xt_quota_counter *master __attribute__((aligned(8)));
-};
-
-#endif /* _XT_QUOTA_H */
diff --git a/ANDROID_3.4.5/include/linux/netfilter/xt_rateest.h b/ANDROID_3.4.5/include/linux/netfilter/xt_rateest.h
deleted file mode 100644
index d40a6196..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter/xt_rateest.h
+++ /dev/null
@@ -1,37 +0,0 @@
-#ifndef _XT_RATEEST_MATCH_H
-#define _XT_RATEEST_MATCH_H
-
-#include <linux/types.h>
-
-enum xt_rateest_match_flags {
-	XT_RATEEST_MATCH_INVERT	= 1<<0,
-	XT_RATEEST_MATCH_ABS	= 1<<1,
-	XT_RATEEST_MATCH_REL	= 1<<2,
-	XT_RATEEST_MATCH_DELTA	= 1<<3,
-	XT_RATEEST_MATCH_BPS	= 1<<4,
-	XT_RATEEST_MATCH_PPS	= 1<<5,
-};
-
-enum xt_rateest_match_mode {
-	XT_RATEEST_MATCH_NONE,
-	XT_RATEEST_MATCH_EQ,
-	XT_RATEEST_MATCH_LT,
-	XT_RATEEST_MATCH_GT,
-};
-
-struct xt_rateest_match_info {
-	char			name1[IFNAMSIZ];
-	char			name2[IFNAMSIZ];
-	__u16		flags;
-	__u16		mode;
-	__u32		bps1;
-	__u32		pps1;
-	__u32		bps2;
-	__u32		pps2;
-
-	/* Used internally by the kernel */
-	struct xt_rateest	*est1 __attribute__((aligned(8)));
-	struct xt_rateest	*est2 __attribute__((aligned(8)));
-};
-
-#endif /* _XT_RATEEST_MATCH_H */
diff --git a/ANDROID_3.4.5/include/linux/netfilter/xt_realm.h b/ANDROID_3.4.5/include/linux/netfilter/xt_realm.h
deleted file mode 100644
index d4a82ee5..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter/xt_realm.h
+++ /dev/null
@@ -1,12 +0,0 @@
-#ifndef _XT_REALM_H
-#define _XT_REALM_H
-
-#include <linux/types.h>
-
-struct xt_realm_info {
-	__u32 id;
-	__u32 mask;
-	__u8 invert;
-};
-
-#endif /* _XT_REALM_H */
diff --git a/ANDROID_3.4.5/include/linux/netfilter/xt_recent.h b/ANDROID_3.4.5/include/linux/netfilter/xt_recent.h
deleted file mode 100644
index 83318e01..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter/xt_recent.h
+++ /dev/null
@@ -1,35 +0,0 @@
-#ifndef _LINUX_NETFILTER_XT_RECENT_H
-#define _LINUX_NETFILTER_XT_RECENT_H 1
-
-#include <linux/types.h>
-
-enum {
-	XT_RECENT_CHECK    = 1 << 0,
-	XT_RECENT_SET      = 1 << 1,
-	XT_RECENT_UPDATE   = 1 << 2,
-	XT_RECENT_REMOVE   = 1 << 3,
-	XT_RECENT_TTL      = 1 << 4,
-	XT_RECENT_REAP     = 1 << 5,
-
-	XT_RECENT_SOURCE   = 0,
-	XT_RECENT_DEST     = 1,
-
-	XT_RECENT_NAME_LEN = 200,
-};
-
-/* Only allowed with --rcheck and --update */
-#define XT_RECENT_MODIFIERS (XT_RECENT_TTL|XT_RECENT_REAP)
-
-#define XT_RECENT_VALID_FLAGS (XT_RECENT_CHECK|XT_RECENT_SET|XT_RECENT_UPDATE|\
-			       XT_RECENT_REMOVE|XT_RECENT_TTL|XT_RECENT_REAP)
-
-struct xt_recent_mtinfo {
-	__u32 seconds;
-	__u32 hit_count;
-	__u8 check_set;
-	__u8 invert;
-	char name[XT_RECENT_NAME_LEN];
-	__u8 side;
-};
-
-#endif /* _LINUX_NETFILTER_XT_RECENT_H */
diff --git a/ANDROID_3.4.5/include/linux/netfilter/xt_rpfilter.h b/ANDROID_3.4.5/include/linux/netfilter/xt_rpfilter.h
deleted file mode 100644
index 8358d4f7..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter/xt_rpfilter.h
+++ /dev/null
@@ -1,23 +0,0 @@
-#ifndef _XT_RPATH_H
-#define _XT_RPATH_H
-
-#include <linux/types.h>
-
-enum {
-	XT_RPFILTER_LOOSE = 1 << 0,
-	XT_RPFILTER_VALID_MARK = 1 << 1,
-	XT_RPFILTER_ACCEPT_LOCAL = 1 << 2,
-	XT_RPFILTER_INVERT = 1 << 3,
-#ifdef __KERNEL__
-	XT_RPFILTER_OPTION_MASK = XT_RPFILTER_LOOSE |
-				  XT_RPFILTER_VALID_MARK |
-				  XT_RPFILTER_ACCEPT_LOCAL |
-				  XT_RPFILTER_INVERT,
-#endif
-};
-
-struct xt_rpfilter_info {
-	__u8 flags;
-};
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/netfilter/xt_sctp.h b/ANDROID_3.4.5/include/linux/netfilter/xt_sctp.h
deleted file mode 100644
index 29287be6..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter/xt_sctp.h
+++ /dev/null
@@ -1,92 +0,0 @@
-#ifndef _XT_SCTP_H_
-#define _XT_SCTP_H_
-
-#include <linux/types.h>
-
-#define XT_SCTP_SRC_PORTS	        0x01
-#define XT_SCTP_DEST_PORTS	        0x02
-#define XT_SCTP_CHUNK_TYPES		0x04
-
-#define XT_SCTP_VALID_FLAGS		0x07
-
-struct xt_sctp_flag_info {
-	__u8 chunktype;
-	__u8 flag;
-	__u8 flag_mask;
-};
-
-#define XT_NUM_SCTP_FLAGS	4
-
-struct xt_sctp_info {
-	__u16 dpts[2];  /* Min, Max */
-	__u16 spts[2];  /* Min, Max */
-
-	__u32 chunkmap[256 / sizeof (__u32)];  /* Bit mask of chunks to be matched according to RFC 2960 */
-
-#define SCTP_CHUNK_MATCH_ANY   0x01  /* Match if any of the chunk types are present */
-#define SCTP_CHUNK_MATCH_ALL   0x02  /* Match if all of the chunk types are present */
-#define SCTP_CHUNK_MATCH_ONLY  0x04  /* Match if these are the only chunk types present */
-
-	__u32 chunk_match_type;
-	struct xt_sctp_flag_info flag_info[XT_NUM_SCTP_FLAGS];
-	int flag_count;
-
-	__u32 flags;
-	__u32 invflags;
-};
-
-#define bytes(type) (sizeof(type) * 8)
-
-#define SCTP_CHUNKMAP_SET(chunkmap, type) 		\
-	do { 						\
-		(chunkmap)[type / bytes(__u32)] |= 	\
-			1 << (type % bytes(__u32));	\
-	} while (0)
-
-#define SCTP_CHUNKMAP_CLEAR(chunkmap, type)		 	\
-	do {							\
-		(chunkmap)[type / bytes(__u32)] &= 		\
-			~(1 << (type % bytes(__u32)));	\
-	} while (0)
-
-#define SCTP_CHUNKMAP_IS_SET(chunkmap, type) 			\
-({								\
-	((chunkmap)[type / bytes (__u32)] & 		\
-		(1 << (type % bytes (__u32)))) ? 1: 0;	\
-})
-
-#define SCTP_CHUNKMAP_RESET(chunkmap) \
-	memset((chunkmap), 0, sizeof(chunkmap))
-
-#define SCTP_CHUNKMAP_SET_ALL(chunkmap) \
-	memset((chunkmap), ~0U, sizeof(chunkmap))
-
-#define SCTP_CHUNKMAP_COPY(destmap, srcmap) \
-	memcpy((destmap), (srcmap), sizeof(srcmap))
-
-#define SCTP_CHUNKMAP_IS_CLEAR(chunkmap) \
-	__sctp_chunkmap_is_clear((chunkmap), ARRAY_SIZE(chunkmap))
-static inline bool
-__sctp_chunkmap_is_clear(const __u32 *chunkmap, unsigned int n)
-{
-	unsigned int i;
-	for (i = 0; i < n; ++i)
-		if (chunkmap[i])
-			return false;
-	return true;
-}
-
-#define SCTP_CHUNKMAP_IS_ALL_SET(chunkmap) \
-	__sctp_chunkmap_is_all_set((chunkmap), ARRAY_SIZE(chunkmap))
-static inline bool
-__sctp_chunkmap_is_all_set(const __u32 *chunkmap, unsigned int n)
-{
-	unsigned int i;
-	for (i = 0; i < n; ++i)
-		if (chunkmap[i] != ~0U)
-			return false;
-	return true;
-}
-
-#endif /* _XT_SCTP_H_ */
-
diff --git a/ANDROID_3.4.5/include/linux/netfilter/xt_set.h b/ANDROID_3.4.5/include/linux/netfilter/xt_set.h
deleted file mode 100644
index e3a9978f..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter/xt_set.h
+++ /dev/null
@@ -1,65 +0,0 @@
-#ifndef _XT_SET_H
-#define _XT_SET_H
-
-#include <linux/types.h>
-#include <linux/netfilter/ipset/ip_set.h>
-
-/* Revision 0 interface: backward compatible with netfilter/iptables */
-
-/*
- * Option flags for kernel operations (xt_set_info_v0)
- */
-#define IPSET_SRC		0x01	/* Source match/add */
-#define IPSET_DST		0x02	/* Destination match/add */
-#define IPSET_MATCH_INV		0x04	/* Inverse matching */
-
-struct xt_set_info_v0 {
-	ip_set_id_t index;
-	union {
-		__u32 flags[IPSET_DIM_MAX + 1];
-		struct {
-			__u32 __flags[IPSET_DIM_MAX];
-			__u8 dim;
-			__u8 flags;
-		} compat;
-	} u;
-};
-
-/* match and target infos */
-struct xt_set_info_match_v0 {
-	struct xt_set_info_v0 match_set;
-};
-
-struct xt_set_info_target_v0 {
-	struct xt_set_info_v0 add_set;
-	struct xt_set_info_v0 del_set;
-};
-
-/* Revision 1  match and target */
-
-struct xt_set_info {
-	ip_set_id_t index;
-	__u8 dim;
-	__u8 flags;
-};
-
-/* match and target infos */
-struct xt_set_info_match_v1 {
-	struct xt_set_info match_set;
-};
-
-struct xt_set_info_target_v1 {
-	struct xt_set_info add_set;
-	struct xt_set_info del_set;
-};
-
-/* Revision 2 target */
-
-struct xt_set_info_target_v2 {
-	struct xt_set_info add_set;
-	struct xt_set_info del_set;
-	__u32 flags;
-	__u32 timeout;
-};
-
-#endif /*_XT_SET_H*/
diff --git a/ANDROID_3.4.5/include/linux/netfilter/xt_socket.h b/ANDROID_3.4.5/include/linux/netfilter/xt_socket.h
deleted file mode 100644
index 63594564..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter/xt_socket.h
+++ /dev/null
@@ -1,20 +0,0 @@
-#ifndef _XT_SOCKET_H
-#define _XT_SOCKET_H
-
-#include <linux/types.h>
-
-enum {
-	XT_SOCKET_TRANSPARENT = 1 << 0,
-};
-
-struct xt_socket_mtinfo1 {
-	__u8 flags;
-};
-
-void xt_socket_put_sk(struct sock *sk);
-struct sock *xt_socket_get4_sk(const struct sk_buff *skb,
-			       struct xt_action_param *par);
-struct sock *xt_socket_get6_sk(const struct sk_buff *skb,
-			       struct xt_action_param *par);
-
-#endif /* _XT_SOCKET_H */
diff --git a/ANDROID_3.4.5/include/linux/netfilter/xt_state.h b/ANDROID_3.4.5/include/linux/netfilter/xt_state.h
deleted file mode 100644
index 7b32de88..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter/xt_state.h
+++ /dev/null
@@ -1,12 +0,0 @@
-#ifndef _XT_STATE_H
-#define _XT_STATE_H
-
-#define XT_STATE_BIT(ctinfo) (1 << ((ctinfo)%IP_CT_IS_REPLY+1))
-#define XT_STATE_INVALID (1 << 0)
-
-#define XT_STATE_UNTRACKED (1 << (IP_CT_NUMBER + 1))
-
-struct xt_state_info {
-	unsigned int statemask;
-};
-#endif /*_XT_STATE_H*/
diff --git a/ANDROID_3.4.5/include/linux/netfilter/xt_statistic.h b/ANDROID_3.4.5/include/linux/netfilter/xt_statistic.h
deleted file mode 100644
index 4e983ef0..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter/xt_statistic.h
+++ /dev/null
@@ -1,36 +0,0 @@
-#ifndef _XT_STATISTIC_H
-#define _XT_STATISTIC_H
-
-#include <linux/types.h>
-
-enum xt_statistic_mode {
-	XT_STATISTIC_MODE_RANDOM,
-	XT_STATISTIC_MODE_NTH,
-	__XT_STATISTIC_MODE_MAX
-};
-#define XT_STATISTIC_MODE_MAX (__XT_STATISTIC_MODE_MAX - 1)
-
-enum xt_statistic_flags {
-	XT_STATISTIC_INVERT		= 0x1,
-};
-#define XT_STATISTIC_MASK		0x1
-
-struct xt_statistic_priv;
-
-struct xt_statistic_info {
-	__u16			mode;
-	__u16			flags;
-	union {
-		struct {
-			__u32	probability;
-		} random;
-		struct {
-			__u32	every;
-			__u32	packet;
-			__u32	count; /* unused */
-		} nth;
-	} u;
-	struct xt_statistic_priv *master __attribute__((aligned(8)));
-};
-
-#endif /* _XT_STATISTIC_H */
diff --git a/ANDROID_3.4.5/include/linux/netfilter/xt_string.h b/ANDROID_3.4.5/include/linux/netfilter/xt_string.h
deleted file mode 100644
index 235347c0..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter/xt_string.h
+++ /dev/null
@@ -1,34 +0,0 @@
-#ifndef _XT_STRING_H
-#define _XT_STRING_H
-
-#include <linux/types.h>
-
-#define XT_STRING_MAX_PATTERN_SIZE 128
-#define XT_STRING_MAX_ALGO_NAME_SIZE 16
-
-enum {
-	XT_STRING_FLAG_INVERT		= 0x01,
-	XT_STRING_FLAG_IGNORECASE	= 0x02
-};
-
-struct xt_string_info {
-	__u16 from_offset;
-	__u16 to_offset;
-	char	  algo[XT_STRING_MAX_ALGO_NAME_SIZE];
-	char 	  pattern[XT_STRING_MAX_PATTERN_SIZE];
-	__u8  patlen;
-	union {
-		struct {
-			__u8  invert;
-		} v0;
-
-		struct {
-			__u8  flags;
-		} v1;
-	} u;
-
-	/* Used internally by the kernel */
-	struct ts_config __attribute__((aligned(8))) *config;
-};
-
-#endif /*_XT_STRING_H*/
diff --git a/ANDROID_3.4.5/include/linux/netfilter/xt_tcpmss.h b/ANDROID_3.4.5/include/linux/netfilter/xt_tcpmss.h
deleted file mode 100644
index fbac56b9..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter/xt_tcpmss.h
+++ /dev/null
@@ -1,11 +0,0 @@
-#ifndef _XT_TCPMSS_MATCH_H
-#define _XT_TCPMSS_MATCH_H
-
-#include <linux/types.h>
-
-struct xt_tcpmss_match_info {
-    __u16 mss_min, mss_max;
-    __u8 invert;
-};
-
-#endif /*_XT_TCPMSS_MATCH_H*/
diff --git a/ANDROID_3.4.5/include/linux/netfilter/xt_tcpudp.h b/ANDROID_3.4.5/include/linux/netfilter/xt_tcpudp.h
deleted file mode 100644
index 38aa7b39..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter/xt_tcpudp.h
+++ /dev/null
@@ -1,36 +0,0 @@
-#ifndef _XT_TCPUDP_H
-#define _XT_TCPUDP_H
-
-#include <linux/types.h>
-
-/* TCP matching stuff */
-struct xt_tcp {
-	__u16 spts[2];			/* Source port range. */
-	__u16 dpts[2];			/* Destination port range. */
-	__u8 option;			/* TCP Option iff non-zero*/
-	__u8 flg_mask;			/* TCP flags mask byte */
-	__u8 flg_cmp;			/* TCP flags compare byte */
-	__u8 invflags;			/* Inverse flags */
-};
-
-/* Values for "inv" field in struct ipt_tcp. */
-#define XT_TCP_INV_SRCPT	0x01	/* Invert the sense of source ports. */
-#define XT_TCP_INV_DSTPT	0x02	/* Invert the sense of dest ports. */
-#define XT_TCP_INV_FLAGS	0x04	/* Invert the sense of TCP flags. */
-#define XT_TCP_INV_OPTION	0x08	/* Invert the sense of option test. */
-#define XT_TCP_INV_MASK		0x0F	/* All possible flags. */
-
-/* UDP matching stuff */
-struct xt_udp {
-	__u16 spts[2];			/* Source port range. */
-	__u16 dpts[2];			/* Destination port range. */
-	__u8 invflags;			/* Inverse flags */
-};
-
-/* Values for "invflags" field in struct ipt_udp. */
-#define XT_UDP_INV_SRCPT	0x01	/* Invert the sense of source ports. */
-#define XT_UDP_INV_DSTPT	0x02	/* Invert the sense of dest ports. */
-#define XT_UDP_INV_MASK	0x03	/* All possible flags. */
-
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/netfilter/xt_time.h b/ANDROID_3.4.5/include/linux/netfilter/xt_time.h
deleted file mode 100644
index 7c37fac5..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter/xt_time.h
+++ /dev/null
@@ -1,27 +0,0 @@
-#ifndef _XT_TIME_H
-#define _XT_TIME_H 1
-
-#include <linux/types.h>
-
-struct xt_time_info {
-	__u32 date_start;
-	__u32 date_stop;
-	__u32 daytime_start;
-	__u32 daytime_stop;
-	__u32 monthdays_match;
-	__u8 weekdays_match;
-	__u8 flags;
-};
-
-enum {
-	/* Match against local time (instead of UTC) */
-	XT_TIME_LOCAL_TZ = 1 << 0,
-
-	/* Shortcuts */
-	XT_TIME_ALL_MONTHDAYS = 0xFFFFFFFE,
-	XT_TIME_ALL_WEEKDAYS  = 0xFE,
-	XT_TIME_MIN_DAYTIME   = 0,
-	XT_TIME_MAX_DAYTIME   = 24 * 60 * 60 - 1,
-};
-
-#endif /* _XT_TIME_H */
diff --git a/ANDROID_3.4.5/include/linux/netfilter/xt_u32.h b/ANDROID_3.4.5/include/linux/netfilter/xt_u32.h
deleted file mode 100644
index 04d1bfea..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter/xt_u32.h
+++ /dev/null
@@ -1,42 +0,0 @@
-#ifndef _XT_U32_H
-#define _XT_U32_H 1
-
-#include <linux/types.h>
-
-enum xt_u32_ops {
-	XT_U32_AND,
-	XT_U32_LEFTSH,
-	XT_U32_RIGHTSH,
-	XT_U32_AT,
-};
-
-struct xt_u32_location_element {
-	__u32 number;
-	__u8 nextop;
-};
-
-struct xt_u32_value_element {
-	__u32 min;
-	__u32 max;
-};
-
-/*
- * Any way to allow for an arbitrary number of elements?
- * For now, I settle with a limit of 10 each.
- */
-#define XT_U32_MAXSIZE 10
-
-struct xt_u32_test {
-	struct xt_u32_location_element location[XT_U32_MAXSIZE+1];
-	struct xt_u32_value_element value[XT_U32_MAXSIZE+1];
-	__u8 nnums;
-	__u8 nvalues;
-};
-
-struct xt_u32 {
-	struct xt_u32_test tests[XT_U32_MAXSIZE+1];
-	__u8 ntests;
-	__u8 invert;
-};
-
-#endif /* _XT_U32_H */
diff --git a/ANDROID_3.4.5/include/linux/netfilter_arp.h b/ANDROID_3.4.5/include/linux/netfilter_arp.h
deleted file mode 100644
index 92bc6ddc..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter_arp.h
+++ /dev/null
@@ -1,19 +0,0 @@
-#ifndef __LINUX_ARP_NETFILTER_H
-#define __LINUX_ARP_NETFILTER_H
-
-/* ARP-specific defines for netfilter.
- * (C)2002 Rusty Russell IBM -- This code is GPL.
- */
-
-#include <linux/netfilter.h>
-
-/* There is no PF_ARP. */
-#define NF_ARP		0
-
-/* ARP Hooks */
-#define NF_ARP_IN	0
-#define NF_ARP_OUT	1
-#define NF_ARP_FORWARD	2
-#define NF_ARP_NUMHOOKS	3
-
-#endif /* __LINUX_ARP_NETFILTER_H */
diff --git a/ANDROID_3.4.5/include/linux/netfilter_arp/Kbuild b/ANDROID_3.4.5/include/linux/netfilter_arp/Kbuild
deleted file mode 100644
index b27439c7..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter_arp/Kbuild
+++ /dev/null
@@ -1,2 +0,0 @@
-header-y += arp_tables.h
-header-y += arpt_mangle.h
diff --git a/ANDROID_3.4.5/include/linux/netfilter_arp/arp_tables.h b/ANDROID_3.4.5/include/linux/netfilter_arp/arp_tables.h
deleted file mode 100644
index e08565d4..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter_arp/arp_tables.h
+++ /dev/null
@@ -1,278 +0,0 @@
-/*
- * 	Format of an ARP firewall descriptor
- *
- * 	src, tgt, src_mask, tgt_mask, arpop, arpop_mask are always stored in
- *	network byte order.
- * 	flags are stored in host byte order (of course).
- */
-
-#ifndef _ARPTABLES_H
-#define _ARPTABLES_H
-
-#ifdef __KERNEL__
-#include <linux/if.h>
-#include <linux/in.h>
-#include <linux/if_arp.h>
-#include <linux/skbuff.h>
-#endif
-#include <linux/types.h>
-#include <linux/compiler.h>
-#include <linux/netfilter_arp.h>
-
-#include <linux/netfilter/x_tables.h>
-
-#ifndef __KERNEL__
-#define ARPT_FUNCTION_MAXNAMELEN XT_FUNCTION_MAXNAMELEN
-#define ARPT_TABLE_MAXNAMELEN XT_TABLE_MAXNAMELEN
-#define arpt_entry_target xt_entry_target
-#define arpt_standard_target xt_standard_target
-#define arpt_error_target xt_error_target
-#define ARPT_CONTINUE XT_CONTINUE
-#define ARPT_RETURN XT_RETURN
-#define arpt_counters_info xt_counters_info
-#define arpt_counters xt_counters
-#define ARPT_STANDARD_TARGET XT_STANDARD_TARGET
-#define ARPT_ERROR_TARGET XT_ERROR_TARGET
-#define ARPT_ENTRY_ITERATE(entries, size, fn, args...) \
-	XT_ENTRY_ITERATE(struct arpt_entry, entries, size, fn, ## args)
-#endif
-
-#define ARPT_DEV_ADDR_LEN_MAX 16
-
-struct arpt_devaddr_info {
-	char addr[ARPT_DEV_ADDR_LEN_MAX];
-	char mask[ARPT_DEV_ADDR_LEN_MAX];
-};
-
-/* Yes, Virginia, you have to zero the padding. */
-struct arpt_arp {
-	/* Source and target IP addr */
-	struct in_addr src, tgt;
-	/* Mask for src and target IP addr */
-	struct in_addr smsk, tmsk;
-
-	/* Device hw address length, src+target device addresses */
-	__u8 arhln, arhln_mask;
-	struct arpt_devaddr_info src_devaddr;
-	struct arpt_devaddr_info tgt_devaddr;
-
-	/* ARP operation code. */
-	__be16 arpop, arpop_mask;
-
-	/* ARP hardware address and protocol address format. */
-	__be16 arhrd, arhrd_mask;
-	__be16 arpro, arpro_mask;
-
-	/* The protocol address length is only accepted if it is 4
-	 * so there is no use in offering a way to do filtering on it.
-	 */
-
-	char iniface[IFNAMSIZ], outiface[IFNAMSIZ];
-	unsigned char iniface_mask[IFNAMSIZ], outiface_mask[IFNAMSIZ];
-
-	/* Flags word */
-	__u8 flags;
-	/* Inverse flags */
-	__u16 invflags;
-};
-
-/* Values for "flag" field in struct arpt_ip (general arp structure).
- * No flags defined yet.
- */
-#define ARPT_F_MASK		0x00	/* All possible flag bits mask. */
-
-/* Values for "inv" field in struct arpt_arp. */
-#define ARPT_INV_VIA_IN		0x0001	/* Invert the sense of IN IFACE. */
-#define ARPT_INV_VIA_OUT	0x0002	/* Invert the sense of OUT IFACE */
-#define ARPT_INV_SRCIP		0x0004	/* Invert the sense of SRC IP. */
-#define ARPT_INV_TGTIP		0x0008	/* Invert the sense of TGT IP. */
-#define ARPT_INV_SRCDEVADDR	0x0010	/* Invert the sense of SRC DEV ADDR. */
-#define ARPT_INV_TGTDEVADDR	0x0020	/* Invert the sense of TGT DEV ADDR. */
-#define ARPT_INV_ARPOP		0x0040	/* Invert the sense of ARP OP. */
-#define ARPT_INV_ARPHRD		0x0080	/* Invert the sense of ARP HRD. */
-#define ARPT_INV_ARPPRO		0x0100	/* Invert the sense of ARP PRO. */
-#define ARPT_INV_ARPHLN		0x0200	/* Invert the sense of ARP HLN. */
-#define ARPT_INV_MASK		0x03FF	/* All possible flag bits mask. */
-
-/* This structure defines each of the firewall rules.  Consists of 3
-   parts which are 1) general ARP header stuff 2) match specific
-   stuff 3) the target to perform if the rule matches */
-struct arpt_entry
-{
-	struct arpt_arp arp;
-
-	/* Size of arpt_entry + matches */
-	__u16 target_offset;
-	/* Size of arpt_entry + matches + target */
-	__u16 next_offset;
-
-	/* Back pointer */
-	unsigned int comefrom;
-
-	/* Packet and byte counters. */
-	struct xt_counters counters;
-
-	/* The matches (if any), then the target. */
-	unsigned char elems[0];
-};
-
-/*
- * New IP firewall options for [gs]etsockopt at the RAW IP level.
- * Unlike BSD Linux inherits IP options so you don't have to use a raw
- * socket for this. Instead we check rights in the calls.
- *
- * ATTENTION: check linux/in.h before adding new number here.
- */
-#define ARPT_BASE_CTL		96
-
-#define ARPT_SO_SET_REPLACE		(ARPT_BASE_CTL)
-#define ARPT_SO_SET_ADD_COUNTERS	(ARPT_BASE_CTL + 1)
-#define ARPT_SO_SET_MAX			ARPT_SO_SET_ADD_COUNTERS
-
-#define ARPT_SO_GET_INFO		(ARPT_BASE_CTL)
-#define ARPT_SO_GET_ENTRIES		(ARPT_BASE_CTL + 1)
-/* #define ARPT_SO_GET_REVISION_MATCH	(APRT_BASE_CTL + 2) */
-#define ARPT_SO_GET_REVISION_TARGET	(ARPT_BASE_CTL + 3)
-#define ARPT_SO_GET_MAX			(ARPT_SO_GET_REVISION_TARGET)
-
-/* The argument to ARPT_SO_GET_INFO */
-struct arpt_getinfo {
-	/* Which table: caller fills this in. */
-	char name[XT_TABLE_MAXNAMELEN];
-
-	/* Kernel fills these in. */
-	/* Which hook entry points are valid: bitmask */
-	unsigned int valid_hooks;
-
-	/* Hook entry points: one per netfilter hook. */
-	unsigned int hook_entry[NF_ARP_NUMHOOKS];
-
-	/* Underflow points. */
-	unsigned int underflow[NF_ARP_NUMHOOKS];
-
-	/* Number of entries */
-	unsigned int num_entries;
-
-	/* Size of entries. */
-	unsigned int size;
-};
-
-/* The argument to ARPT_SO_SET_REPLACE. */
-struct arpt_replace {
-	/* Which table. */
-	char name[XT_TABLE_MAXNAMELEN];
-
-	/* Which hook entry points are valid: bitmask.  You can't
-           change this. */
-	unsigned int valid_hooks;
-
-	/* Number of entries */
-	unsigned int num_entries;
-
-	/* Total size of new entries */
-	unsigned int size;
-
-	/* Hook entry points. */
-	unsigned int hook_entry[NF_ARP_NUMHOOKS];
-
-	/* Underflow points. */
-	unsigned int underflow[NF_ARP_NUMHOOKS];
-
-	/* Information about old entries: */
-	/* Number of counters (must be equal to current number of entries). */
-	unsigned int num_counters;
-	/* The old entries' counters. */
-	struct xt_counters __user *counters;
-
-	/* The entries (hang off end: not really an array). */
-	struct arpt_entry entries[0];
-};
-
-/* The argument to ARPT_SO_GET_ENTRIES. */
-struct arpt_get_entries {
-	/* Which table: user fills this in. */
-	char name[XT_TABLE_MAXNAMELEN];
-
-	/* User fills this in: total entry size. */
-	unsigned int size;
-
-	/* The entries. */
-	struct arpt_entry entrytable[0];
-};
-
-/* Helper functions */
-static __inline__ struct xt_entry_target *arpt_get_target(struct arpt_entry *e)
-{
-	return (void *)e + e->target_offset;
-}
-
-/*
- *	Main firewall chains definitions and global var's definitions.
- */
-#ifdef __KERNEL__
-
-/* Standard entry. */
-struct arpt_standard {
-	struct arpt_entry entry;
-	struct xt_standard_target target;
-};
-
-struct arpt_error {
-	struct arpt_entry entry;
-	struct xt_error_target target;
-};
-
-#define ARPT_ENTRY_INIT(__size)						       \
-{									       \
-	.target_offset	= sizeof(struct arpt_entry),			       \
-	.next_offset	= (__size),					       \
-}
-
-#define ARPT_STANDARD_INIT(__verdict)					       \
-{									       \
-	.entry		= ARPT_ENTRY_INIT(sizeof(struct arpt_standard)),       \
-	.target		= XT_TARGET_INIT(XT_STANDARD_TARGET,		       \
-					 sizeof(struct xt_standard_target)), \
-	.target.verdict	= -(__verdict) - 1,				       \
-}
-
-#define ARPT_ERROR_INIT							       \
-{									       \
-	.entry		= ARPT_ENTRY_INIT(sizeof(struct arpt_error)),	       \
-	.target		= XT_TARGET_INIT(XT_ERROR_TARGET,		       \
-					 sizeof(struct xt_error_target)),      \
-	.target.errorname = "ERROR",					       \
-}
-
-extern void *arpt_alloc_initial_table(const struct xt_table *);
-extern struct xt_table *arpt_register_table(struct net *net,
-					    const struct xt_table *table,
-					    const struct arpt_replace *repl);
-extern void arpt_unregister_table(struct xt_table *table);
-extern unsigned int arpt_do_table(struct sk_buff *skb,
-				  unsigned int hook,
-				  const struct net_device *in,
-				  const struct net_device *out,
-				  struct xt_table *table);
-
-#ifdef CONFIG_COMPAT
-#include <net/compat.h>
-
-struct compat_arpt_entry {
-	struct arpt_arp arp;
-	__u16 target_offset;
-	__u16 next_offset;
-	compat_uint_t comefrom;
-	struct compat_xt_counters counters;
-	unsigned char elems[0];
-};
-
-static inline struct xt_entry_target *
-compat_arpt_get_target(struct compat_arpt_entry *e)
-{
-	return (void *)e + e->target_offset;
-}
-
-#endif /* CONFIG_COMPAT */
-#endif /*__KERNEL__*/
-#endif /* _ARPTABLES_H */
diff --git a/ANDROID_3.4.5/include/linux/netfilter_arp/arpt_mangle.h b/ANDROID_3.4.5/include/linux/netfilter_arp/arpt_mangle.h
deleted file mode 100644
index 250f5029..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter_arp/arpt_mangle.h
+++ /dev/null
@@ -1,26 +0,0 @@
-#ifndef _ARPT_MANGLE_H
-#define _ARPT_MANGLE_H
-#include <linux/netfilter_arp/arp_tables.h>
-
-#define ARPT_MANGLE_ADDR_LEN_MAX sizeof(struct in_addr)
-struct arpt_mangle
-{
-	char src_devaddr[ARPT_DEV_ADDR_LEN_MAX];
-	char tgt_devaddr[ARPT_DEV_ADDR_LEN_MAX];
-	union {
-		struct in_addr src_ip;
-	} u_s;
-	union {
-		struct in_addr tgt_ip;
-	} u_t;
-	u_int8_t flags;
-	int target;
-};
-
-#define ARPT_MANGLE_SDEV 0x01
-#define ARPT_MANGLE_TDEV 0x02
-#define ARPT_MANGLE_SIP 0x04
-#define ARPT_MANGLE_TIP 0x08
-#define ARPT_MANGLE_MASK 0x0f
-
-#endif /* _ARPT_MANGLE_H */
diff --git a/ANDROID_3.4.5/include/linux/netfilter_bridge.h b/ANDROID_3.4.5/include/linux/netfilter_bridge.h
deleted file mode 100644
index 31d2844e..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter_bridge.h
+++ /dev/null
@@ -1,122 +0,0 @@
-#ifndef __LINUX_BRIDGE_NETFILTER_H
-#define __LINUX_BRIDGE_NETFILTER_H
-
-/* bridge-specific defines for netfilter. 
- */
-
-#include <linux/netfilter.h>
-#include <linux/if_ether.h>
-#include <linux/if_vlan.h>
-#include <linux/if_pppox.h>
-
-/* Bridge Hooks */
-/* After promisc drops, checksum checks. */
-#define NF_BR_PRE_ROUTING	0
-/* If the packet is destined for this box. */
-#define NF_BR_LOCAL_IN		1
-/* If the packet is destined for another interface. */
-#define NF_BR_FORWARD		2
-/* Packets coming from a local process. */
-#define NF_BR_LOCAL_OUT		3
-/* Packets about to hit the wire. */
-#define NF_BR_POST_ROUTING	4
-/* Not really a hook, but used for the ebtables broute table */
-#define NF_BR_BROUTING		5
-#define NF_BR_NUMHOOKS		6
-
-#ifdef __KERNEL__
-
-enum nf_br_hook_priorities {
-	NF_BR_PRI_FIRST = INT_MIN,
-	NF_BR_PRI_NAT_DST_BRIDGED = -300,
-	NF_BR_PRI_FILTER_BRIDGED = -200,
-	NF_BR_PRI_BRNF = 0,
-	NF_BR_PRI_NAT_DST_OTHER = 100,
-	NF_BR_PRI_FILTER_OTHER = 200,
-	NF_BR_PRI_NAT_SRC = 300,
-	NF_BR_PRI_LAST = INT_MAX,
-};
-
-#ifdef CONFIG_BRIDGE_NETFILTER
-
-#define BRNF_PKT_TYPE			0x01
-#define BRNF_BRIDGED_DNAT		0x02
-#define BRNF_BRIDGED			0x04
-#define BRNF_NF_BRIDGE_PREROUTING	0x08
-#define BRNF_8021Q			0x10
-#define BRNF_PPPoE			0x20
-
-/* Only used in br_forward.c */
-extern int nf_bridge_copy_header(struct sk_buff *skb);
-static inline int nf_bridge_maybe_copy_header(struct sk_buff *skb)
-{
-	if (skb->nf_bridge &&
-	    skb->nf_bridge->mask & (BRNF_BRIDGED | BRNF_BRIDGED_DNAT))
-		return nf_bridge_copy_header(skb);
-  	return 0;
-}
-
-static inline unsigned int nf_bridge_encap_header_len(const struct sk_buff *skb)
-{
-	switch (skb->protocol) {
-	case __cpu_to_be16(ETH_P_8021Q):
-		return VLAN_HLEN;
-	case __cpu_to_be16(ETH_P_PPP_SES):
-		return PPPOE_SES_HLEN;
-	default:
-		return 0;
-	}
-}
-
-static inline unsigned int nf_bridge_mtu_reduction(const struct sk_buff *skb)
-{
-	if (unlikely(skb->nf_bridge->mask & BRNF_PPPoE))
-		return PPPOE_SES_HLEN;
-	return 0;
-}
-
-extern int br_handle_frame_finish(struct sk_buff *skb);
-/* Only used in br_device.c */
-static inline int br_nf_pre_routing_finish_bridge_slow(struct sk_buff *skb)
-{
-	struct nf_bridge_info *nf_bridge = skb->nf_bridge;
-
-	skb_pull(skb, ETH_HLEN);
-	nf_bridge->mask ^= BRNF_BRIDGED_DNAT;
-	skb_copy_to_linear_data_offset(skb, -(ETH_HLEN-ETH_ALEN),
-				       skb->nf_bridge->data, ETH_HLEN-ETH_ALEN);
-	skb->dev = nf_bridge->physindev;
-	return br_handle_frame_finish(skb);
-}
-
-/* This is called by the IP fragmenting code and it ensures there is
- * enough room for the encapsulating header (if there is one). */
-static inline unsigned int nf_bridge_pad(const struct sk_buff *skb)
-{
-	if (skb->nf_bridge)
-		return nf_bridge_encap_header_len(skb);
-	return 0;
-}
-
-struct bridge_skb_cb {
-	union {
-		__be32 ipv4;
-	} daddr;
-};
-
-static inline void br_drop_fake_rtable(struct sk_buff *skb)
-{
-	struct dst_entry *dst = skb_dst(skb);
-
-	if (dst && (dst->flags & DST_FAKE_RTABLE))
-		skb_dst_drop(skb);
-}
-
-#else
-#define nf_bridge_maybe_copy_header(skb)	(0)
-#define nf_bridge_pad(skb)			(0)
-#define br_drop_fake_rtable(skb)	        do { } while (0)
-#endif /* CONFIG_BRIDGE_NETFILTER */
-
-#endif /* __KERNEL__ */
-#endif
diff --git a/ANDROID_3.4.5/include/linux/netfilter_bridge/Kbuild b/ANDROID_3.4.5/include/linux/netfilter_bridge/Kbuild
deleted file mode 100644
index e48f1a3f..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter_bridge/Kbuild
+++ /dev/null
@@ -1,18 +0,0 @@
-header-y += ebt_802_3.h
-header-y += ebt_among.h
-header-y += ebt_arp.h
-header-y += ebt_arpreply.h
-header-y += ebt_ip.h
-header-y += ebt_ip6.h
-header-y += ebt_limit.h
-header-y += ebt_log.h
-header-y += ebt_mark_m.h
-header-y += ebt_mark_t.h
-header-y += ebt_nat.h
-header-y += ebt_nflog.h
-header-y += ebt_pkttype.h
-header-y += ebt_redirect.h
-header-y += ebt_stp.h
-header-y += ebt_ulog.h
-header-y += ebt_vlan.h
-header-y += ebtables.h
diff --git a/ANDROID_3.4.5/include/linux/netfilter_bridge/ebt_802_3.h b/ANDROID_3.4.5/include/linux/netfilter_bridge/ebt_802_3.h
deleted file mode 100644
index be5be157..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter_bridge/ebt_802_3.h
+++ /dev/null
@@ -1,70 +0,0 @@
-#ifndef __LINUX_BRIDGE_EBT_802_3_H
-#define __LINUX_BRIDGE_EBT_802_3_H
-
-#include <linux/types.h>
-
-#define EBT_802_3_SAP 0x01
-#define EBT_802_3_TYPE 0x02
-
-#define EBT_802_3_MATCH "802_3"
-
-/*
- * If frame has DSAP/SSAP value 0xaa you must check the SNAP type
- * to discover what kind of packet we're carrying. 
- */
-#define CHECK_TYPE 0xaa
-
-/*
- * Control field may be one or two bytes.  If the first byte has
- * the value 0x03 then the entire length is one byte, otherwise it is two.
- * One byte controls are used in Unnumbered Information frames.
- * Two byte controls are used in Numbered Information frames.
- */
-#define IS_UI 0x03
-
-#define EBT_802_3_MASK (EBT_802_3_SAP | EBT_802_3_TYPE | EBT_802_3)
-
-/* ui has one byte ctrl, ni has two */
-struct hdr_ui {
-	__u8 dsap;
-	__u8 ssap;
-	__u8 ctrl;
-	__u8 orig[3];
-	__be16 type;
-};
-
-struct hdr_ni {
-	__u8 dsap;
-	__u8 ssap;
-	__be16 ctrl;
-	__u8  orig[3];
-	__be16 type;
-};
-
-struct ebt_802_3_hdr {
-	__u8  daddr[6];
-	__u8  saddr[6];
-	__be16 len;
-	union {
-		struct hdr_ui ui;
-		struct hdr_ni ni;
-	} llc;
-};
-
-#ifdef __KERNEL__
-#include <linux/skbuff.h>
-
-static inline struct ebt_802_3_hdr *ebt_802_3_hdr(const struct sk_buff *skb)
-{
-	return (struct ebt_802_3_hdr *)skb_mac_header(skb);
-}
-#endif
-
-struct ebt_802_3_info {
-	__u8  sap;
-	__be16 type;
-	__u8  bitmask;
-	__u8  invflags;
-};
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/netfilter_bridge/ebt_among.h b/ANDROID_3.4.5/include/linux/netfilter_bridge/ebt_among.h
deleted file mode 100644
index bd4e3ad0..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter_bridge/ebt_among.h
+++ /dev/null
@@ -1,64 +0,0 @@
-#ifndef __LINUX_BRIDGE_EBT_AMONG_H
-#define __LINUX_BRIDGE_EBT_AMONG_H
-
-#include <linux/types.h>
-
-#define EBT_AMONG_DST 0x01
-#define EBT_AMONG_SRC 0x02
-
-/* Grzegorz Borowiak <grzes@gnu.univ.gda.pl> 2003
- * 
- * Write-once-read-many hash table, used for checking if a given
- * MAC address belongs to a set or not and possibly for checking
- * if it is related with a given IPv4 address.
- *
- * The hash value of an address is its last byte.
- * 
- * In real-world ethernet addresses, values of the last byte are
- * evenly distributed and there is no need to consider other bytes.
- * It would only slow the routines down.
- *
- * For MAC address comparison speedup reasons, we introduce a trick.
- * MAC address is mapped onto an array of two 32-bit integers.
- * This pair of integers is compared with MAC addresses in the
- * hash table, which are stored also in form of pairs of integers
- * (in `cmp' array). This is quick as it requires only two elementary
- * number comparisons in worst case. Further, we take advantage of
- * fact that entropy of 3 last bytes of address is larger than entropy
- * of 3 first bytes. So first we compare 4 last bytes of addresses and
- * if they are the same we compare 2 first.
- *
- * Yes, it is a memory overhead, but in 2003 AD, who cares?
- */
-
-struct ebt_mac_wormhash_tuple {
-	__u32 cmp[2];
-	__be32 ip;
-};
-
-struct ebt_mac_wormhash {
-	int table[257];
-	int poolsize;
-	struct ebt_mac_wormhash_tuple pool[0];
-};
-
-#define ebt_mac_wormhash_size(x) ((x) ? sizeof(struct ebt_mac_wormhash) \
-		+ (x)->poolsize * sizeof(struct ebt_mac_wormhash_tuple) : 0)
-
-struct ebt_among_info {
-	int wh_dst_ofs;
-	int wh_src_ofs;
-	int bitmask;
-};
-
-#define EBT_AMONG_DST_NEG 0x1
-#define EBT_AMONG_SRC_NEG 0x2
-
-#define ebt_among_wh_dst(x) ((x)->wh_dst_ofs ? \
-	(struct ebt_mac_wormhash*)((char*)(x) + (x)->wh_dst_ofs) : NULL)
-#define ebt_among_wh_src(x) ((x)->wh_src_ofs ? \
-	(struct ebt_mac_wormhash*)((char*)(x) + (x)->wh_src_ofs) : NULL)
-
-#define EBT_AMONG_MATCH "among"
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/netfilter_bridge/ebt_arp.h b/ANDROID_3.4.5/include/linux/netfilter_bridge/ebt_arp.h
deleted file mode 100644
index 522f3e42..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter_bridge/ebt_arp.h
+++ /dev/null
@@ -1,36 +0,0 @@
-#ifndef __LINUX_BRIDGE_EBT_ARP_H
-#define __LINUX_BRIDGE_EBT_ARP_H
-
-#include <linux/types.h>
-
-#define EBT_ARP_OPCODE 0x01
-#define EBT_ARP_HTYPE 0x02
-#define EBT_ARP_PTYPE 0x04
-#define EBT_ARP_SRC_IP 0x08
-#define EBT_ARP_DST_IP 0x10
-#define EBT_ARP_SRC_MAC 0x20
-#define EBT_ARP_DST_MAC 0x40
-#define EBT_ARP_GRAT 0x80
-#define EBT_ARP_MASK (EBT_ARP_OPCODE | EBT_ARP_HTYPE | EBT_ARP_PTYPE | \
-   EBT_ARP_SRC_IP | EBT_ARP_DST_IP | EBT_ARP_SRC_MAC | EBT_ARP_DST_MAC | \
-   EBT_ARP_GRAT)
-#define EBT_ARP_MATCH "arp"
-
-struct ebt_arp_info
-{
-	__be16 htype;
-	__be16 ptype;
-	__be16 opcode;
-	__be32 saddr;
-	__be32 smsk;
-	__be32 daddr;
-	__be32 dmsk;
-	unsigned char smaddr[ETH_ALEN];
-	unsigned char smmsk[ETH_ALEN];
-	unsigned char dmaddr[ETH_ALEN];
-	unsigned char dmmsk[ETH_ALEN];
-	__u8  bitmask;
-	__u8  invflags;
-};
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/netfilter_bridge/ebt_arpreply.h b/ANDROID_3.4.5/include/linux/netfilter_bridge/ebt_arpreply.h
deleted file mode 100644
index 7e77896e..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter_bridge/ebt_arpreply.h
+++ /dev/null
@@ -1,10 +0,0 @@
-#ifndef __LINUX_BRIDGE_EBT_ARPREPLY_H
-#define __LINUX_BRIDGE_EBT_ARPREPLY_H
-
-struct ebt_arpreply_info {
-	unsigned char mac[ETH_ALEN];
-	int target;
-};
-#define EBT_ARPREPLY_TARGET "arpreply"
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/netfilter_bridge/ebt_ip.h b/ANDROID_3.4.5/include/linux/netfilter_bridge/ebt_ip.h
deleted file mode 100644
index c4bbc41b..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter_bridge/ebt_ip.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- *  ebt_ip
- *
- *	Authors:
- *	Bart De Schuymer <bart.de.schuymer@pandora.be>
- *
- *  April, 2002
- *
- *  Changes:
- *    added ip-sport and ip-dport
- *    Innominate Security Technologies AG <mhopf@innominate.com>
- *    September, 2002
- */
-
-#ifndef __LINUX_BRIDGE_EBT_IP_H
-#define __LINUX_BRIDGE_EBT_IP_H
-
-#include <linux/types.h>
-
-#define EBT_IP_SOURCE 0x01
-#define EBT_IP_DEST 0x02
-#define EBT_IP_TOS 0x04
-#define EBT_IP_PROTO 0x08
-#define EBT_IP_SPORT 0x10
-#define EBT_IP_DPORT 0x20
-#define EBT_IP_MASK (EBT_IP_SOURCE | EBT_IP_DEST | EBT_IP_TOS | EBT_IP_PROTO |\
- EBT_IP_SPORT | EBT_IP_DPORT )
-#define EBT_IP_MATCH "ip"
-
-/* the same values are used for the invflags */
-struct ebt_ip_info {
-	__be32 saddr;
-	__be32 daddr;
-	__be32 smsk;
-	__be32 dmsk;
-	__u8  tos;
-	__u8  protocol;
-	__u8  bitmask;
-	__u8  invflags;
-	__u16 sport[2];
-	__u16 dport[2];
-};
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/netfilter_bridge/ebt_ip6.h b/ANDROID_3.4.5/include/linux/netfilter_bridge/ebt_ip6.h
deleted file mode 100644
index 42b88968..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter_bridge/ebt_ip6.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- *  ebt_ip6
- *
- *	Authors:
- * Kuo-Lang Tseng <kuo-lang.tseng@intel.com>
- * Manohar Castelino <manohar.r.castelino@intel.com>
- *
- *  Jan 11, 2008
- *
- */
-
-#ifndef __LINUX_BRIDGE_EBT_IP6_H
-#define __LINUX_BRIDGE_EBT_IP6_H
-
-#include <linux/types.h>
-
-#define EBT_IP6_SOURCE 0x01
-#define EBT_IP6_DEST 0x02
-#define EBT_IP6_TCLASS 0x04
-#define EBT_IP6_PROTO 0x08
-#define EBT_IP6_SPORT 0x10
-#define EBT_IP6_DPORT 0x20
-#define EBT_IP6_ICMP6 0x40
-
-#define EBT_IP6_MASK (EBT_IP6_SOURCE | EBT_IP6_DEST | EBT_IP6_TCLASS |\
-		      EBT_IP6_PROTO | EBT_IP6_SPORT | EBT_IP6_DPORT | \
-		      EBT_IP6_ICMP6)
-#define EBT_IP6_MATCH "ip6"
-
-/* the same values are used for the invflags */
-struct ebt_ip6_info {
-	struct in6_addr saddr;
-	struct in6_addr daddr;
-	struct in6_addr smsk;
-	struct in6_addr dmsk;
-	__u8  tclass;
-	__u8  protocol;
-	__u8  bitmask;
-	__u8  invflags;
-	union {
-		__u16 sport[2];
-		__u8 icmpv6_type[2];
-	};
-	union {
-		__u16 dport[2];
-		__u8 icmpv6_code[2];
-	};
-};
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/netfilter_bridge/ebt_limit.h b/ANDROID_3.4.5/include/linux/netfilter_bridge/ebt_limit.h
deleted file mode 100644
index 66d80b30..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter_bridge/ebt_limit.h
+++ /dev/null
@@ -1,24 +0,0 @@
-#ifndef __LINUX_BRIDGE_EBT_LIMIT_H
-#define __LINUX_BRIDGE_EBT_LIMIT_H
-
-#include <linux/types.h>
-
-#define EBT_LIMIT_MATCH "limit"
-
-/* timings are in milliseconds. */
-#define EBT_LIMIT_SCALE 10000
-
-/* 1/10,000 sec period => max of 10,000/sec.  Min rate is then 429490
-   seconds, or one every 59 hours. */
-
-struct ebt_limit_info {
-	__u32 avg;    /* Average secs between packets * scale */
-	__u32 burst;  /* Period multiplier for upper limit. */
-
-	/* Used internally by the kernel */
-	unsigned long prev;
-	__u32 credit;
-	__u32 credit_cap, cost;
-};
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/netfilter_bridge/ebt_log.h b/ANDROID_3.4.5/include/linux/netfilter_bridge/ebt_log.h
deleted file mode 100644
index 7e7f1d1f..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter_bridge/ebt_log.h
+++ /dev/null
@@ -1,20 +0,0 @@
-#ifndef __LINUX_BRIDGE_EBT_LOG_H
-#define __LINUX_BRIDGE_EBT_LOG_H
-
-#include <linux/types.h>
-
-#define EBT_LOG_IP 0x01 /* if the frame is made by ip, log the ip information */
-#define EBT_LOG_ARP 0x02
-#define EBT_LOG_NFLOG 0x04
-#define EBT_LOG_IP6 0x08
-#define EBT_LOG_MASK (EBT_LOG_IP | EBT_LOG_ARP | EBT_LOG_IP6)
-#define EBT_LOG_PREFIX_SIZE 30
-#define EBT_LOG_WATCHER "log"
-
-struct ebt_log_info {
-	__u8 loglevel;
-	__u8 prefix[EBT_LOG_PREFIX_SIZE];
-	__u32 bitmask;
-};
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/netfilter_bridge/ebt_mark_m.h b/ANDROID_3.4.5/include/linux/netfilter_bridge/ebt_mark_m.h
deleted file mode 100644
index 410f9e5a..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter_bridge/ebt_mark_m.h
+++ /dev/null
@@ -1,16 +0,0 @@
-#ifndef __LINUX_BRIDGE_EBT_MARK_M_H
-#define __LINUX_BRIDGE_EBT_MARK_M_H
-
-#include <linux/types.h>
-
-#define EBT_MARK_AND 0x01
-#define EBT_MARK_OR 0x02
-#define EBT_MARK_MASK (EBT_MARK_AND | EBT_MARK_OR)
-struct ebt_mark_m_info {
-	unsigned long mark, mask;
-	__u8 invert;
-	__u8 bitmask;
-};
-#define EBT_MARK_MATCH "mark_m"
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/netfilter_bridge/ebt_mark_t.h b/ANDROID_3.4.5/include/linux/netfilter_bridge/ebt_mark_t.h
deleted file mode 100644
index 7d5a268a..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter_bridge/ebt_mark_t.h
+++ /dev/null
@@ -1,23 +0,0 @@
-#ifndef __LINUX_BRIDGE_EBT_MARK_T_H
-#define __LINUX_BRIDGE_EBT_MARK_T_H
-
-/* The target member is reused for adding new actions, the
- * value of the real target is -1 to -NUM_STANDARD_TARGETS.
- * For backward compatibility, the 4 lsb (2 would be enough,
- * but let's play it safe) are kept to designate this target.
- * The remaining bits designate the action. By making the set
- * action 0xfffffff0, the result will look ok for older
- * versions. [September 2006] */
-#define MARK_SET_VALUE (0xfffffff0)
-#define MARK_OR_VALUE  (0xffffffe0)
-#define MARK_AND_VALUE (0xffffffd0)
-#define MARK_XOR_VALUE (0xffffffc0)
-
-struct ebt_mark_t_info {
-	unsigned long mark;
-	/* EBT_ACCEPT, EBT_DROP, EBT_CONTINUE or EBT_RETURN */
-	int target;
-};
-#define EBT_MARK_TARGET "mark"
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/netfilter_bridge/ebt_nat.h b/ANDROID_3.4.5/include/linux/netfilter_bridge/ebt_nat.h
deleted file mode 100644
index 5e74e3b0..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter_bridge/ebt_nat.h
+++ /dev/null
@@ -1,13 +0,0 @@
-#ifndef __LINUX_BRIDGE_EBT_NAT_H
-#define __LINUX_BRIDGE_EBT_NAT_H
-
-#define NAT_ARP_BIT  (0x00000010)
-struct ebt_nat_info {
-	unsigned char mac[ETH_ALEN];
-	/* EBT_ACCEPT, EBT_DROP, EBT_CONTINUE or EBT_RETURN */
-	int target;
-};
-#define EBT_SNAT_TARGET "snat"
-#define EBT_DNAT_TARGET "dnat"
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/netfilter_bridge/ebt_nflog.h b/ANDROID_3.4.5/include/linux/netfilter_bridge/ebt_nflog.h
deleted file mode 100644
index df829fce..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter_bridge/ebt_nflog.h
+++ /dev/null
@@ -1,23 +0,0 @@
-#ifndef __LINUX_BRIDGE_EBT_NFLOG_H
-#define __LINUX_BRIDGE_EBT_NFLOG_H
-
-#include <linux/types.h>
-
-#define EBT_NFLOG_MASK 0x0
-
-#define EBT_NFLOG_PREFIX_SIZE 64
-#define EBT_NFLOG_WATCHER "nflog"
-
-#define EBT_NFLOG_DEFAULT_GROUP		0x1
-#define EBT_NFLOG_DEFAULT_THRESHOLD	1
-
-struct ebt_nflog_info {
-	__u32 len;
-	__u16 group;
-	__u16 threshold;
-	__u16 flags;
-	__u16 pad;
-	char prefix[EBT_NFLOG_PREFIX_SIZE];
-};
-
-#endif				/* __LINUX_BRIDGE_EBT_NFLOG_H */
diff --git a/ANDROID_3.4.5/include/linux/netfilter_bridge/ebt_pkttype.h b/ANDROID_3.4.5/include/linux/netfilter_bridge/ebt_pkttype.h
deleted file mode 100644
index c241badc..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter_bridge/ebt_pkttype.h
+++ /dev/null
@@ -1,12 +0,0 @@
-#ifndef __LINUX_BRIDGE_EBT_PKTTYPE_H
-#define __LINUX_BRIDGE_EBT_PKTTYPE_H
-
-#include <linux/types.h>
-
-struct ebt_pkttype_info {
-	__u8 pkt_type;
-	__u8 invert;
-};
-#define EBT_PKTTYPE_MATCH "pkttype"
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/netfilter_bridge/ebt_redirect.h b/ANDROID_3.4.5/include/linux/netfilter_bridge/ebt_redirect.h
deleted file mode 100644
index dd9622ce..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter_bridge/ebt_redirect.h
+++ /dev/null
@@ -1,10 +0,0 @@
-#ifndef __LINUX_BRIDGE_EBT_REDIRECT_H
-#define __LINUX_BRIDGE_EBT_REDIRECT_H
-
-struct ebt_redirect_info {
-	/* EBT_ACCEPT, EBT_DROP, EBT_CONTINUE or EBT_RETURN */
-	int target;
-};
-#define EBT_REDIRECT_TARGET "redirect"
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/netfilter_bridge/ebt_stp.h b/ANDROID_3.4.5/include/linux/netfilter_bridge/ebt_stp.h
deleted file mode 100644
index 1025b9f5..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter_bridge/ebt_stp.h
+++ /dev/null
@@ -1,46 +0,0 @@
-#ifndef __LINUX_BRIDGE_EBT_STP_H
-#define __LINUX_BRIDGE_EBT_STP_H
-
-#include <linux/types.h>
-
-#define EBT_STP_TYPE		0x0001
-
-#define EBT_STP_FLAGS		0x0002
-#define EBT_STP_ROOTPRIO	0x0004
-#define EBT_STP_ROOTADDR	0x0008
-#define EBT_STP_ROOTCOST	0x0010
-#define EBT_STP_SENDERPRIO	0x0020
-#define EBT_STP_SENDERADDR	0x0040
-#define EBT_STP_PORT		0x0080
-#define EBT_STP_MSGAGE		0x0100
-#define EBT_STP_MAXAGE		0x0200
-#define EBT_STP_HELLOTIME	0x0400
-#define EBT_STP_FWDD		0x0800
-
-#define EBT_STP_MASK		0x0fff
-#define EBT_STP_CONFIG_MASK	0x0ffe
-
-#define EBT_STP_MATCH "stp"
-
-struct ebt_stp_config_info {
-	__u8 flags;
-	__u16 root_priol, root_priou;
-	char root_addr[6], root_addrmsk[6];
-	__u32 root_costl, root_costu;
-	__u16 sender_priol, sender_priou;
-	char sender_addr[6], sender_addrmsk[6];
-	__u16 portl, portu;
-	__u16 msg_agel, msg_ageu;
-	__u16 max_agel, max_ageu;
-	__u16 hello_timel, hello_timeu;
-	__u16 forward_delayl, forward_delayu;
-};
-
-struct ebt_stp_info {
-	__u8 type;
-	struct ebt_stp_config_info config;
-	__u16 bitmask;
-	__u16 invflags;
-};
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/netfilter_bridge/ebt_ulog.h b/ANDROID_3.4.5/include/linux/netfilter_bridge/ebt_ulog.h
deleted file mode 100644
index 89a6becb..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter_bridge/ebt_ulog.h
+++ /dev/null
@@ -1,38 +0,0 @@
-#ifndef _EBT_ULOG_H
-#define _EBT_ULOG_H
-
-#include <linux/types.h>
-
-#define EBT_ULOG_DEFAULT_NLGROUP 0
-#define EBT_ULOG_DEFAULT_QTHRESHOLD 1
-#define EBT_ULOG_MAXNLGROUPS 32 /* hardcoded netlink max */
-#define EBT_ULOG_PREFIX_LEN 32
-#define EBT_ULOG_MAX_QLEN 50
-#define EBT_ULOG_WATCHER "ulog"
-#define EBT_ULOG_VERSION 1
-
-struct ebt_ulog_info {
-	__u32 nlgroup;
-	unsigned int cprange;
-	unsigned int qthreshold;
-	char prefix[EBT_ULOG_PREFIX_LEN];
-};
-
-typedef struct ebt_ulog_packet_msg {
-	int version;
-	char indev[IFNAMSIZ];
-	char outdev[IFNAMSIZ];
-	char physindev[IFNAMSIZ];
-	char physoutdev[IFNAMSIZ];
-	char prefix[EBT_ULOG_PREFIX_LEN];
-	struct timeval stamp;
-	unsigned long mark;
-	unsigned int hook;
-	size_t data_len;
-	/* The complete packet, including Ethernet header and perhaps
-	 * the VLAN header is appended */
-	unsigned char data[0] __attribute__
-	                      ((aligned (__alignof__(struct ebt_ulog_info))));
-} ebt_ulog_packet_msg_t;
-
-#endif /* _EBT_ULOG_H */
diff --git a/ANDROID_3.4.5/include/linux/netfilter_bridge/ebt_vlan.h b/ANDROID_3.4.5/include/linux/netfilter_bridge/ebt_vlan.h
deleted file mode 100644
index 967d1d5c..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter_bridge/ebt_vlan.h
+++ /dev/null
@@ -1,22 +0,0 @@
-#ifndef __LINUX_BRIDGE_EBT_VLAN_H
-#define __LINUX_BRIDGE_EBT_VLAN_H
-
-#include <linux/types.h>
-
-#define EBT_VLAN_ID	0x01
-#define EBT_VLAN_PRIO	0x02
-#define EBT_VLAN_ENCAP	0x04
-#define EBT_VLAN_MASK (EBT_VLAN_ID | EBT_VLAN_PRIO | EBT_VLAN_ENCAP)
-#define EBT_VLAN_MATCH "vlan"
-
-struct ebt_vlan_info {
-	__u16 id;		/* VLAN ID {1-4095} */
-	__u8 prio;		/* VLAN User Priority {0-7} */
-	__be16 encap;		/* VLAN Encapsulated frame code {0-65535} */
-	__u8 bitmask;		/* Args bitmask bit 1=1 - ID arg,
-				   bit 2=1 User-Priority arg, bit 3=1 encap*/
-	__u8 invflags;		/* Inverse bitmask  bit 1=1 - inversed ID arg, 
-				   bit 2=1 - inversed Pirority arg */
-};
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/netfilter_bridge/ebtables.h b/ANDROID_3.4.5/include/linux/netfilter_bridge/ebtables.h
deleted file mode 100644
index 4dd5bd69..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter_bridge/ebtables.h
+++ /dev/null
@@ -1,380 +0,0 @@
-/*
- *  ebtables
- *
- *	Authors:
- *	Bart De Schuymer		<bdschuym@pandora.be>
- *
- *  ebtables.c,v 2.0, April, 2002
- *
- *  This code is stongly inspired on the iptables code which is
- *  Copyright (C) 1999 Paul `Rusty' Russell & Michael J. Neuling
- */
-
-#ifndef __LINUX_BRIDGE_EFF_H
-#define __LINUX_BRIDGE_EFF_H
-#include <linux/if.h>
-#include <linux/netfilter_bridge.h>
-#include <linux/if_ether.h>
-
-#define EBT_TABLE_MAXNAMELEN 32
-#define EBT_CHAIN_MAXNAMELEN EBT_TABLE_MAXNAMELEN
-#define EBT_FUNCTION_MAXNAMELEN EBT_TABLE_MAXNAMELEN
-
-/* verdicts >0 are "branches" */
-#define EBT_ACCEPT   -1
-#define EBT_DROP     -2
-#define EBT_CONTINUE -3
-#define EBT_RETURN   -4
-#define NUM_STANDARD_TARGETS   4
-/* ebtables target modules store the verdict inside an int. We can
- * reclaim a part of this int for backwards compatible extensions.
- * The 4 lsb are more than enough to store the verdict. */
-#define EBT_VERDICT_BITS 0x0000000F
-
-struct xt_match;
-struct xt_target;
-
-struct ebt_counter {
-	uint64_t pcnt;
-	uint64_t bcnt;
-};
-
-struct ebt_replace {
-	char name[EBT_TABLE_MAXNAMELEN];
-	unsigned int valid_hooks;
-	/* nr of rules in the table */
-	unsigned int nentries;
-	/* total size of the entries */
-	unsigned int entries_size;
-	/* start of the chains */
-	struct ebt_entries __user *hook_entry[NF_BR_NUMHOOKS];
-	/* nr of counters userspace expects back */
-	unsigned int num_counters;
-	/* where the kernel will put the old counters */
-	struct ebt_counter __user *counters;
-	char __user *entries;
-};
-
-struct ebt_replace_kernel {
-	char name[EBT_TABLE_MAXNAMELEN];
-	unsigned int valid_hooks;
-	/* nr of rules in the table */
-	unsigned int nentries;
-	/* total size of the entries */
-	unsigned int entries_size;
-	/* start of the chains */
-	struct ebt_entries *hook_entry[NF_BR_NUMHOOKS];
-	/* nr of counters userspace expects back */
-	unsigned int num_counters;
-	/* where the kernel will put the old counters */
-	struct ebt_counter *counters;
-	char *entries;
-};
-
-struct ebt_entries {
-	/* this field is always set to zero
-	 * See EBT_ENTRY_OR_ENTRIES.
-	 * Must be same size as ebt_entry.bitmask */
-	unsigned int distinguisher;
-	/* the chain name */
-	char name[EBT_CHAIN_MAXNAMELEN];
-	/* counter offset for this chain */
-	unsigned int counter_offset;
-	/* one standard (accept, drop, return) per hook */
-	int policy;
-	/* nr. of entries */
-	unsigned int nentries;
-	/* entry list */
-	char data[0] __attribute__ ((aligned (__alignof__(struct ebt_replace))));
-};
-
-/* used for the bitmask of struct ebt_entry */
-
-/* This is a hack to make a difference between an ebt_entry struct and an
- * ebt_entries struct when traversing the entries from start to end.
- * Using this simplifies the code a lot, while still being able to use
- * ebt_entries.
- * Contrary, iptables doesn't use something like ebt_entries and therefore uses
- * different techniques for naming the policy and such. So, iptables doesn't
- * need a hack like this.
- */
-#define EBT_ENTRY_OR_ENTRIES 0x01
-/* these are the normal masks */
-#define EBT_NOPROTO 0x02
-#define EBT_802_3 0x04
-#define EBT_SOURCEMAC 0x08
-#define EBT_DESTMAC 0x10
-#define EBT_F_MASK (EBT_NOPROTO | EBT_802_3 | EBT_SOURCEMAC | EBT_DESTMAC \
-   | EBT_ENTRY_OR_ENTRIES)
-
-#define EBT_IPROTO 0x01
-#define EBT_IIN 0x02
-#define EBT_IOUT 0x04
-#define EBT_ISOURCE 0x8
-#define EBT_IDEST 0x10
-#define EBT_ILOGICALIN 0x20
-#define EBT_ILOGICALOUT 0x40
-#define EBT_INV_MASK (EBT_IPROTO | EBT_IIN | EBT_IOUT | EBT_ILOGICALIN \
-   | EBT_ILOGICALOUT | EBT_ISOURCE | EBT_IDEST)
-
-struct ebt_entry_match {
-	union {
-		char name[EBT_FUNCTION_MAXNAMELEN];
-		struct xt_match *match;
-	} u;
-	/* size of data */
-	unsigned int match_size;
-	unsigned char data[0] __attribute__ ((aligned (__alignof__(struct ebt_replace))));
-};
-
-struct ebt_entry_watcher {
-	union {
-		char name[EBT_FUNCTION_MAXNAMELEN];
-		struct xt_target *watcher;
-	} u;
-	/* size of data */
-	unsigned int watcher_size;
-	unsigned char data[0] __attribute__ ((aligned (__alignof__(struct ebt_replace))));
-};
-
-struct ebt_entry_target {
-	union {
-		char name[EBT_FUNCTION_MAXNAMELEN];
-		struct xt_target *target;
-	} u;
-	/* size of data */
-	unsigned int target_size;
-	unsigned char data[0] __attribute__ ((aligned (__alignof__(struct ebt_replace))));
-};
-
-#define EBT_STANDARD_TARGET "standard"
-struct ebt_standard_target {
-	struct ebt_entry_target target;
-	int verdict;
-};
-
-/* one entry */
-struct ebt_entry {
-	/* this needs to be the first field */
-	unsigned int bitmask;
-	unsigned int invflags;
-	__be16 ethproto;
-	/* the physical in-dev */
-	char in[IFNAMSIZ];
-	/* the logical in-dev */
-	char logical_in[IFNAMSIZ];
-	/* the physical out-dev */
-	char out[IFNAMSIZ];
-	/* the logical out-dev */
-	char logical_out[IFNAMSIZ];
-	unsigned char sourcemac[ETH_ALEN];
-	unsigned char sourcemsk[ETH_ALEN];
-	unsigned char destmac[ETH_ALEN];
-	unsigned char destmsk[ETH_ALEN];
-	/* sizeof ebt_entry + matches */
-	unsigned int watchers_offset;
-	/* sizeof ebt_entry + matches + watchers */
-	unsigned int target_offset;
-	/* sizeof ebt_entry + matches + watchers + target */
-	unsigned int next_offset;
-	unsigned char elems[0] __attribute__ ((aligned (__alignof__(struct ebt_replace))));
-};
-
-/* {g,s}etsockopt numbers */
-#define EBT_BASE_CTL            128
-
-#define EBT_SO_SET_ENTRIES      (EBT_BASE_CTL)
-#define EBT_SO_SET_COUNTERS     (EBT_SO_SET_ENTRIES+1)
-#define EBT_SO_SET_MAX          (EBT_SO_SET_COUNTERS+1)
-
-#define EBT_SO_GET_INFO         (EBT_BASE_CTL)
-#define EBT_SO_GET_ENTRIES      (EBT_SO_GET_INFO+1)
-#define EBT_SO_GET_INIT_INFO    (EBT_SO_GET_ENTRIES+1)
-#define EBT_SO_GET_INIT_ENTRIES (EBT_SO_GET_INIT_INFO+1)
-#define EBT_SO_GET_MAX          (EBT_SO_GET_INIT_ENTRIES+1)
-
-#ifdef __KERNEL__
-
-/* return values for match() functions */
-#define EBT_MATCH 0
-#define EBT_NOMATCH 1
-
-struct ebt_match {
-	struct list_head list;
-	const char name[EBT_FUNCTION_MAXNAMELEN];
-	bool (*match)(const struct sk_buff *skb, const struct net_device *in,
-		const struct net_device *out, const struct xt_match *match,
-		const void *matchinfo, int offset, unsigned int protoff,
-		bool *hotdrop);
-	bool (*checkentry)(const char *table, const void *entry,
-		const struct xt_match *match, void *matchinfo,
-		unsigned int hook_mask);
-	void (*destroy)(const struct xt_match *match, void *matchinfo);
-	unsigned int matchsize;
-	u_int8_t revision;
-	u_int8_t family;
-	struct module *me;
-};
-
-struct ebt_watcher {
-	struct list_head list;
-	const char name[EBT_FUNCTION_MAXNAMELEN];
-	unsigned int (*target)(struct sk_buff *skb,
-		const struct net_device *in, const struct net_device *out,
-		unsigned int hook_num, const struct xt_target *target,
-		const void *targinfo);
-	bool (*checkentry)(const char *table, const void *entry,
-		const struct xt_target *target, void *targinfo,
-		unsigned int hook_mask);
-	void (*destroy)(const struct xt_target *target, void *targinfo);
-	unsigned int targetsize;
-	u_int8_t revision;
-	u_int8_t family;
-	struct module *me;
-};
-
-struct ebt_target {
-	struct list_head list;
-	const char name[EBT_FUNCTION_MAXNAMELEN];
-	/* returns one of the standard EBT_* verdicts */
-	unsigned int (*target)(struct sk_buff *skb,
-		const struct net_device *in, const struct net_device *out,
-		unsigned int hook_num, const struct xt_target *target,
-		const void *targinfo);
-	bool (*checkentry)(const char *table, const void *entry,
-		const struct xt_target *target, void *targinfo,
-		unsigned int hook_mask);
-	void (*destroy)(const struct xt_target *target, void *targinfo);
-	unsigned int targetsize;
-	u_int8_t revision;
-	u_int8_t family;
-	struct module *me;
-};
-
-/* used for jumping from and into user defined chains (udc) */
-struct ebt_chainstack {
-	struct ebt_entries *chaininfo; /* pointer to chain data */
-	struct ebt_entry *e; /* pointer to entry data */
-	unsigned int n; /* n'th entry */
-};
-
-struct ebt_table_info {
-	/* total size of the entries */
-	unsigned int entries_size;
-	unsigned int nentries;
-	/* pointers to the start of the chains */
-	struct ebt_entries *hook_entry[NF_BR_NUMHOOKS];
-	/* room to maintain the stack used for jumping from and into udc */
-	struct ebt_chainstack **chainstack;
-	char *entries;
-	struct ebt_counter counters[0] ____cacheline_aligned;
-};
-
-struct ebt_table {
-	struct list_head list;
-	char name[EBT_TABLE_MAXNAMELEN];
-	struct ebt_replace_kernel *table;
-	unsigned int valid_hooks;
-	rwlock_t lock;
-	/* e.g. could be the table explicitly only allows certain
-	 * matches, targets, ... 0 == let it in */
-	int (*check)(const struct ebt_table_info *info,
-	   unsigned int valid_hooks);
-	/* the data used by the kernel */
-	struct ebt_table_info *private;
-	struct module *me;
-};
-
-#define EBT_ALIGN(s) (((s) + (__alignof__(struct _xt_align)-1)) & \
-		     ~(__alignof__(struct _xt_align)-1))
-extern struct ebt_table *ebt_register_table(struct net *net,
-					    const struct ebt_table *table);
-extern void ebt_unregister_table(struct net *net, struct ebt_table *table);
-extern unsigned int ebt_do_table(unsigned int hook, struct sk_buff *skb,
-   const struct net_device *in, const struct net_device *out,
-   struct ebt_table *table);
-
-/* Used in the kernel match() functions */
-#define FWINV(bool,invflg) ((bool) ^ !!(info->invflags & invflg))
-/* True if the hook mask denotes that the rule is in a base chain,
- * used in the check() functions */
-#define BASE_CHAIN (par->hook_mask & (1 << NF_BR_NUMHOOKS))
-/* Clear the bit in the hook mask that tells if the rule is on a base chain */
-#define CLEAR_BASE_CHAIN_BIT (par->hook_mask &= ~(1 << NF_BR_NUMHOOKS))
-/* True if the target is not a standard target */
-#define INVALID_TARGET (info->target < -NUM_STANDARD_TARGETS || info->target >= 0)
-
-#endif /* __KERNEL__ */
-
-/* blatently stolen from ip_tables.h
- * fn returns 0 to continue iteration */
-#define EBT_MATCH_ITERATE(e, fn, args...)                   \
-({                                                          \
-	unsigned int __i;                                   \
-	int __ret = 0;                                      \
-	struct ebt_entry_match *__match;                    \
-	                                                    \
-	for (__i = sizeof(struct ebt_entry);                \
-	     __i < (e)->watchers_offset;                    \
-	     __i += __match->match_size +                   \
-	     sizeof(struct ebt_entry_match)) {              \
-		__match = (void *)(e) + __i;                \
-		                                            \
-		__ret = fn(__match , ## args);              \
-		if (__ret != 0)                             \
-			break;                              \
-	}                                                   \
-	if (__ret == 0) {                                   \
-		if (__i != (e)->watchers_offset)            \
-			__ret = -EINVAL;                    \
-	}                                                   \
-	__ret;                                              \
-})
-
-#define EBT_WATCHER_ITERATE(e, fn, args...)                 \
-({                                                          \
-	unsigned int __i;                                   \
-	int __ret = 0;                                      \
-	struct ebt_entry_watcher *__watcher;                \
-	                                                    \
-	for (__i = e->watchers_offset;                      \
-	     __i < (e)->target_offset;                      \
-	     __i += __watcher->watcher_size +               \
-	     sizeof(struct ebt_entry_watcher)) {            \
-		__watcher = (void *)(e) + __i;              \
-		                                            \
-		__ret = fn(__watcher , ## args);            \
-		if (__ret != 0)                             \
-			break;                              \
-	}                                                   \
-	if (__ret == 0) {                                   \
-		if (__i != (e)->target_offset)              \
-			__ret = -EINVAL;                    \
-	}                                                   \
-	__ret;                                              \
-})
-
-#define EBT_ENTRY_ITERATE(entries, size, fn, args...)       \
-({                                                          \
-	unsigned int __i;                                   \
-	int __ret = 0;                                      \
-	struct ebt_entry *__entry;                          \
-	                                                    \
-	for (__i = 0; __i < (size);) {                      \
-		__entry = (void *)(entries) + __i;          \
-		__ret = fn(__entry , ## args);              \
-		if (__ret != 0)                             \
-			break;                              \
-		if (__entry->bitmask != 0)                  \
-			__i += __entry->next_offset;        \
-		else                                        \
-			__i += sizeof(struct ebt_entries);  \
-	}                                                   \
-	if (__ret == 0) {                                   \
-		if (__i != (size))                          \
-			__ret = -EINVAL;                    \
-	}                                                   \
-	__ret;                                              \
-})
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/netfilter_decnet.h b/ANDROID_3.4.5/include/linux/netfilter_decnet.h
deleted file mode 100644
index 0b09732a..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter_decnet.h
+++ /dev/null
@@ -1,79 +0,0 @@
-#ifndef __LINUX_DECNET_NETFILTER_H
-#define __LINUX_DECNET_NETFILTER_H
-
-/* DECnet-specific defines for netfilter. 
- * This file (C) Steve Whitehouse 1999 derived from the
- * ipv4 netfilter header file which is
- * (C)1998 Rusty Russell -- This code is GPL.
- */
-
-#include <linux/netfilter.h>
-
-/* only for userspace compatibility */
-#ifndef __KERNEL__
-
-#include <limits.h> /* for INT_MIN, INT_MAX */
-
-/* IP Cache bits. */
-/* Src IP address. */
-#define NFC_DN_SRC		0x0001
-/* Dest IP address. */
-#define NFC_DN_DST		0x0002
-/* Input device. */
-#define NFC_DN_IF_IN		0x0004
-/* Output device. */
-#define NFC_DN_IF_OUT		0x0008
-#endif /* ! __KERNEL__ */
-
-/* DECnet Hooks */
-/* After promisc drops, checksum checks. */
-#define NF_DN_PRE_ROUTING	0
-/* If the packet is destined for this box. */
-#define NF_DN_LOCAL_IN		1
-/* If the packet is destined for another interface. */
-#define NF_DN_FORWARD		2
-/* Packets coming from a local process. */
-#define NF_DN_LOCAL_OUT		3
-/* Packets about to hit the wire. */
-#define NF_DN_POST_ROUTING	4
-/* Input Hello Packets */
-#define NF_DN_HELLO		5
-/* Input Routing Packets */
-#define NF_DN_ROUTE		6
-#define NF_DN_NUMHOOKS		7
-
-enum nf_dn_hook_priorities {
-	NF_DN_PRI_FIRST = INT_MIN,
-	NF_DN_PRI_CONNTRACK = -200,
-	NF_DN_PRI_MANGLE = -150,
-	NF_DN_PRI_NAT_DST = -100,
-	NF_DN_PRI_FILTER = 0,
-	NF_DN_PRI_NAT_SRC = 100,
-	NF_DN_PRI_DNRTMSG = 200,
-	NF_DN_PRI_LAST = INT_MAX,
-};
-
-struct nf_dn_rtmsg {
-	int nfdn_ifindex;
-};
-
-#define NFDN_RTMSG(r) ((unsigned char *)(r) + NLMSG_ALIGN(sizeof(struct nf_dn_rtmsg)))
-
-#ifndef __KERNEL__
-/* backwards compatibility for userspace */
-#define DNRMG_L1_GROUP 0x01
-#define DNRMG_L2_GROUP 0x02
-#endif
-
-enum {
-	DNRNG_NLGRP_NONE,
-#define DNRNG_NLGRP_NONE	DNRNG_NLGRP_NONE
-	DNRNG_NLGRP_L1,
-#define DNRNG_NLGRP_L1		DNRNG_NLGRP_L1
-	DNRNG_NLGRP_L2,
-#define DNRNG_NLGRP_L2		DNRNG_NLGRP_L2
-	__DNRNG_NLGRP_MAX
-};
-#define DNRNG_NLGRP_MAX	(__DNRNG_NLGRP_MAX - 1)
-
-#endif /*__LINUX_DECNET_NETFILTER_H*/
diff --git a/ANDROID_3.4.5/include/linux/netfilter_ipv4.h b/ANDROID_3.4.5/include/linux/netfilter_ipv4.h
deleted file mode 100644
index fa0946c5..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter_ipv4.h
+++ /dev/null
@@ -1,86 +0,0 @@
-#ifndef __LINUX_IP_NETFILTER_H
-#define __LINUX_IP_NETFILTER_H
-
-/* IPv4-specific defines for netfilter. 
- * (C)1998 Rusty Russell -- This code is GPL.
- */
-
-#include <linux/netfilter.h>
-
-/* only for userspace compatibility */
-#ifndef __KERNEL__
-
-#include <limits.h> /* for INT_MIN, INT_MAX */
-
-/* IP Cache bits. */
-/* Src IP address. */
-#define NFC_IP_SRC		0x0001
-/* Dest IP address. */
-#define NFC_IP_DST		0x0002
-/* Input device. */
-#define NFC_IP_IF_IN		0x0004
-/* Output device. */
-#define NFC_IP_IF_OUT		0x0008
-/* TOS. */
-#define NFC_IP_TOS		0x0010
-/* Protocol. */
-#define NFC_IP_PROTO		0x0020
-/* IP options. */
-#define NFC_IP_OPTIONS		0x0040
-/* Frag & flags. */
-#define NFC_IP_FRAG		0x0080
-
-/* Per-protocol information: only matters if proto match. */
-/* TCP flags. */
-#define NFC_IP_TCPFLAGS		0x0100
-/* Source port. */
-#define NFC_IP_SRC_PT		0x0200
-/* Dest port. */
-#define NFC_IP_DST_PT		0x0400
-/* Something else about the proto */
-#define NFC_IP_PROTO_UNKNOWN	0x2000
-
-/* IP Hooks */
-/* After promisc drops, checksum checks. */
-#define NF_IP_PRE_ROUTING	0
-/* If the packet is destined for this box. */
-#define NF_IP_LOCAL_IN		1
-/* If the packet is destined for another interface. */
-#define NF_IP_FORWARD		2
-/* Packets coming from a local process. */
-#define NF_IP_LOCAL_OUT		3
-/* Packets about to hit the wire. */
-#define NF_IP_POST_ROUTING	4
-#define NF_IP_NUMHOOKS		5
-#endif /* ! __KERNEL__ */
-
-enum nf_ip_hook_priorities {
-	NF_IP_PRI_FIRST = INT_MIN,
-	NF_IP_PRI_CONNTRACK_DEFRAG = -400,
-	NF_IP_PRI_RAW = -300,
-	NF_IP_PRI_SELINUX_FIRST = -225,
-	NF_IP_PRI_CONNTRACK = -200,
-	NF_IP_PRI_MANGLE = -150,
-	NF_IP_PRI_NAT_DST = -100,
-	NF_IP_PRI_FILTER = 0,
-	NF_IP_PRI_SECURITY = 50,
-	NF_IP_PRI_NAT_SRC = 100,
-	NF_IP_PRI_SELINUX_LAST = 225,
-	NF_IP_PRI_CONNTRACK_CONFIRM = INT_MAX,
-	NF_IP_PRI_LAST = INT_MAX,
-};
-
-/* Arguments for setsockopt SOL_IP: */
-/* 2.0 firewalling went from 64 through 71 (and +256, +512, etc). */
-/* 2.2 firewalling (+ masq) went from 64 through 76 */
-/* 2.4 firewalling went 64 through 67. */
-#define SO_ORIGINAL_DST 80
-
-#ifdef __KERNEL__
-extern int ip_route_me_harder(struct sk_buff *skb, unsigned addr_type);
-extern int ip_xfrm_me_harder(struct sk_buff *skb);
-extern __sum16 nf_ip_checksum(struct sk_buff *skb, unsigned int hook,
-				   unsigned int dataoff, u_int8_t protocol);
-#endif /*__KERNEL__*/
-
-#endif /*__LINUX_IP_NETFILTER_H*/
diff --git a/ANDROID_3.4.5/include/linux/netfilter_ipv4/Kbuild b/ANDROID_3.4.5/include/linux/netfilter_ipv4/Kbuild
deleted file mode 100644
index 31f8bec9..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter_ipv4/Kbuild
+++ /dev/null
@@ -1,12 +0,0 @@
-header-y += ip_queue.h
-header-y += ip_tables.h
-header-y += ipt_CLUSTERIP.h
-header-y += ipt_ECN.h
-header-y += ipt_LOG.h
-header-y += ipt_REJECT.h
-header-y += ipt_TTL.h
-header-y += ipt_ULOG.h
-header-y += ipt_addrtype.h
-header-y += ipt_ah.h
-header-y += ipt_ecn.h
-header-y += ipt_ttl.h
diff --git a/ANDROID_3.4.5/include/linux/netfilter_ipv4/ip_queue.h b/ANDROID_3.4.5/include/linux/netfilter_ipv4/ip_queue.h
deleted file mode 100644
index a03507f4..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter_ipv4/ip_queue.h
+++ /dev/null
@@ -1,72 +0,0 @@
-/*
- * This is a module which is used for queueing IPv4 packets and
- * communicating with userspace via netlink.
- *
- * (C) 2000 James Morris, this code is GPL.
- */
-#ifndef _IP_QUEUE_H
-#define _IP_QUEUE_H
-
-#ifdef __KERNEL__
-#ifdef DEBUG_IPQ
-#define QDEBUG(x...) printk(KERN_DEBUG ## x)
-#else
-#define QDEBUG(x...)
-#endif  /* DEBUG_IPQ */
-#else
-#include <net/if.h>
-#endif	/* ! __KERNEL__ */
-
-/* Messages sent from kernel */
-typedef struct ipq_packet_msg {
-	unsigned long packet_id;	/* ID of queued packet */
-	unsigned long mark;		/* Netfilter mark value */
-	long timestamp_sec;		/* Packet arrival time (seconds) */
-	long timestamp_usec;		/* Packet arrvial time (+useconds) */
-	unsigned int hook;		/* Netfilter hook we rode in on */
-	char indev_name[IFNAMSIZ];	/* Name of incoming interface */
-	char outdev_name[IFNAMSIZ];	/* Name of outgoing interface */
-	__be16 hw_protocol;		/* Hardware protocol (network order) */
-	unsigned short hw_type;		/* Hardware type */
-	unsigned char hw_addrlen;	/* Hardware address length */
-	unsigned char hw_addr[8];	/* Hardware address */
-	size_t data_len;		/* Length of packet data */
-	unsigned char payload[0];	/* Optional packet data */
-} ipq_packet_msg_t;
-
-/* Messages sent from userspace */
-typedef struct ipq_mode_msg {
-	unsigned char value;		/* Requested mode */
-	size_t range;			/* Optional range of packet requested */
-} ipq_mode_msg_t;
-
-typedef struct ipq_verdict_msg {
-	unsigned int value;		/* Verdict to hand to netfilter */
-	unsigned long id;		/* Packet ID for this verdict */
-	size_t data_len;		/* Length of replacement data */
-	unsigned char payload[0];	/* Optional replacement packet */
-} ipq_verdict_msg_t;
-
-typedef struct ipq_peer_msg {
-	union {
-		ipq_verdict_msg_t verdict;
-		ipq_mode_msg_t mode;
-	} msg;
-} ipq_peer_msg_t;
-
-/* Packet delivery modes */
-enum {
-	IPQ_COPY_NONE,		/* Initial mode, packets are dropped */
-	IPQ_COPY_META,		/* Copy metadata */
-	IPQ_COPY_PACKET		/* Copy metadata + packet (range) */
-};
-#define IPQ_COPY_MAX IPQ_COPY_PACKET
-
-/* Types of messages */
-#define IPQM_BASE	0x10	/* standard netlink messages below this */
-#define IPQM_MODE	(IPQM_BASE + 1)		/* Mode request from peer */
-#define IPQM_VERDICT	(IPQM_BASE + 2)		/* Verdict from peer */ 
-#define IPQM_PACKET	(IPQM_BASE + 3)		/* Packet from kernel */
-#define IPQM_MAX	(IPQM_BASE + 4)
-
-#endif /*_IP_QUEUE_H*/
diff --git a/ANDROID_3.4.5/include/linux/netfilter_ipv4/ip_tables.h b/ANDROID_3.4.5/include/linux/netfilter_ipv4/ip_tables.h
deleted file mode 100644
index db792319..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter_ipv4/ip_tables.h
+++ /dev/null
@@ -1,307 +0,0 @@
-/*
- * 25-Jul-1998 Major changes to allow for ip chain table
- *
- * 3-Jan-2000 Named tables to allow packet selection for different uses.
- */
-
-/*
- * 	Format of an IP firewall descriptor
- *
- * 	src, dst, src_mask, dst_mask are always stored in network byte order.
- * 	flags are stored in host byte order (of course).
- * 	Port numbers are stored in HOST byte order.
- */
-
-#ifndef _IPTABLES_H
-#define _IPTABLES_H
-
-#ifdef __KERNEL__
-#include <linux/if.h>
-#include <linux/in.h>
-#include <linux/ip.h>
-#include <linux/skbuff.h>
-#endif
-#include <linux/types.h>
-#include <linux/compiler.h>
-#include <linux/netfilter_ipv4.h>
-
-#include <linux/netfilter/x_tables.h>
-
-#ifndef __KERNEL__
-#define IPT_FUNCTION_MAXNAMELEN XT_FUNCTION_MAXNAMELEN
-#define IPT_TABLE_MAXNAMELEN XT_TABLE_MAXNAMELEN
-#define ipt_match xt_match
-#define ipt_target xt_target
-#define ipt_table xt_table
-#define ipt_get_revision xt_get_revision
-#define ipt_entry_match xt_entry_match
-#define ipt_entry_target xt_entry_target
-#define ipt_standard_target xt_standard_target
-#define ipt_error_target xt_error_target
-#define ipt_counters xt_counters
-#define IPT_CONTINUE XT_CONTINUE
-#define IPT_RETURN XT_RETURN
-
-/* This group is older than old (iptables < v1.4.0-rc1~89) */
-#include <linux/netfilter/xt_tcpudp.h>
-#define ipt_udp xt_udp
-#define ipt_tcp xt_tcp
-#define IPT_TCP_INV_SRCPT	XT_TCP_INV_SRCPT
-#define IPT_TCP_INV_DSTPT	XT_TCP_INV_DSTPT
-#define IPT_TCP_INV_FLAGS	XT_TCP_INV_FLAGS
-#define IPT_TCP_INV_OPTION	XT_TCP_INV_OPTION
-#define IPT_TCP_INV_MASK	XT_TCP_INV_MASK
-#define IPT_UDP_INV_SRCPT	XT_UDP_INV_SRCPT
-#define IPT_UDP_INV_DSTPT	XT_UDP_INV_DSTPT
-#define IPT_UDP_INV_MASK	XT_UDP_INV_MASK
-
-/* The argument to IPT_SO_ADD_COUNTERS. */
-#define ipt_counters_info xt_counters_info
-/* Standard return verdict, or do jump. */
-#define IPT_STANDARD_TARGET XT_STANDARD_TARGET
-/* Error verdict. */
-#define IPT_ERROR_TARGET XT_ERROR_TARGET
-
-/* fn returns 0 to continue iteration */
-#define IPT_MATCH_ITERATE(e, fn, args...) \
-	XT_MATCH_ITERATE(struct ipt_entry, e, fn, ## args)
-
-/* fn returns 0 to continue iteration */
-#define IPT_ENTRY_ITERATE(entries, size, fn, args...) \
-	XT_ENTRY_ITERATE(struct ipt_entry, entries, size, fn, ## args)
-#endif
-
-/* Yes, Virginia, you have to zero the padding. */
-struct ipt_ip {
-	/* Source and destination IP addr */
-	struct in_addr src, dst;
-	/* Mask for src and dest IP addr */
-	struct in_addr smsk, dmsk;
-	char iniface[IFNAMSIZ], outiface[IFNAMSIZ];
-	unsigned char iniface_mask[IFNAMSIZ], outiface_mask[IFNAMSIZ];
-
-	/* Protocol, 0 = ANY */
-	__u16 proto;
-
-	/* Flags word */
-	__u8 flags;
-	/* Inverse flags */
-	__u8 invflags;
-};
-
-/* Values for "flag" field in struct ipt_ip (general ip structure). */
-#define IPT_F_FRAG		0x01	/* Set if rule is a fragment rule */
-#define IPT_F_GOTO		0x02	/* Set if jump is a goto */
-#define IPT_F_MASK		0x03	/* All possible flag bits mask. */
-
-/* Values for "inv" field in struct ipt_ip. */
-#define IPT_INV_VIA_IN		0x01	/* Invert the sense of IN IFACE. */
-#define IPT_INV_VIA_OUT		0x02	/* Invert the sense of OUT IFACE */
-#define IPT_INV_TOS		0x04	/* Invert the sense of TOS. */
-#define IPT_INV_SRCIP		0x08	/* Invert the sense of SRC IP. */
-#define IPT_INV_DSTIP		0x10	/* Invert the sense of DST OP. */
-#define IPT_INV_FRAG		0x20	/* Invert the sense of FRAG. */
-#define IPT_INV_PROTO		XT_INV_PROTO
-#define IPT_INV_MASK		0x7F	/* All possible flag bits mask. */
-
-/* This structure defines each of the firewall rules.  Consists of 3
-   parts which are 1) general IP header stuff 2) match specific
-   stuff 3) the target to perform if the rule matches */
-struct ipt_entry {
-	struct ipt_ip ip;
-
-	/* Mark with fields that we care about. */
-	unsigned int nfcache;
-
-	/* Size of ipt_entry + matches */
-	__u16 target_offset;
-	/* Size of ipt_entry + matches + target */
-	__u16 next_offset;
-
-	/* Back pointer */
-	unsigned int comefrom;
-
-	/* Packet and byte counters. */
-	struct xt_counters counters;
-
-	/* The matches (if any), then the target. */
-	unsigned char elems[0];
-};
-
-/*
- * New IP firewall options for [gs]etsockopt at the RAW IP level.
- * Unlike BSD Linux inherits IP options so you don't have to use a raw
- * socket for this. Instead we check rights in the calls.
- *
- * ATTENTION: check linux/in.h before adding new number here.
- */
-#define IPT_BASE_CTL		64
-
-#define IPT_SO_SET_REPLACE	(IPT_BASE_CTL)
-#define IPT_SO_SET_ADD_COUNTERS	(IPT_BASE_CTL + 1)
-#define IPT_SO_SET_MAX		IPT_SO_SET_ADD_COUNTERS
-
-#define IPT_SO_GET_INFO			(IPT_BASE_CTL)
-#define IPT_SO_GET_ENTRIES		(IPT_BASE_CTL + 1)
-#define IPT_SO_GET_REVISION_MATCH	(IPT_BASE_CTL + 2)
-#define IPT_SO_GET_REVISION_TARGET	(IPT_BASE_CTL + 3)
-#define IPT_SO_GET_MAX			IPT_SO_GET_REVISION_TARGET
-
-/* ICMP matching stuff */
-struct ipt_icmp {
-	__u8 type;				/* type to match */
-	__u8 code[2];				/* range of code */
-	__u8 invflags;				/* Inverse flags */
-};
-
-/* Values for "inv" field for struct ipt_icmp. */
-#define IPT_ICMP_INV	0x01	/* Invert the sense of type/code test */
-
-/* The argument to IPT_SO_GET_INFO */
-struct ipt_getinfo {
-	/* Which table: caller fills this in. */
-	char name[XT_TABLE_MAXNAMELEN];
-
-	/* Kernel fills these in. */
-	/* Which hook entry points are valid: bitmask */
-	unsigned int valid_hooks;
-
-	/* Hook entry points: one per netfilter hook. */
-	unsigned int hook_entry[NF_INET_NUMHOOKS];
-
-	/* Underflow points. */
-	unsigned int underflow[NF_INET_NUMHOOKS];
-
-	/* Number of entries */
-	unsigned int num_entries;
-
-	/* Size of entries. */
-	unsigned int size;
-};
-
-/* The argument to IPT_SO_SET_REPLACE. */
-struct ipt_replace {
-	/* Which table. */
-	char name[XT_TABLE_MAXNAMELEN];
-
-	/* Which hook entry points are valid: bitmask.  You can't
-           change this. */
-	unsigned int valid_hooks;
-
-	/* Number of entries */
-	unsigned int num_entries;
-
-	/* Total size of new entries */
-	unsigned int size;
-
-	/* Hook entry points. */
-	unsigned int hook_entry[NF_INET_NUMHOOKS];
-
-	/* Underflow points. */
-	unsigned int underflow[NF_INET_NUMHOOKS];
-
-	/* Information about old entries: */
-	/* Number of counters (must be equal to current number of entries). */
-	unsigned int num_counters;
-	/* The old entries' counters. */
-	struct xt_counters __user *counters;
-
-	/* The entries (hang off end: not really an array). */
-	struct ipt_entry entries[0];
-};
-
-/* The argument to IPT_SO_GET_ENTRIES. */
-struct ipt_get_entries {
-	/* Which table: user fills this in. */
-	char name[XT_TABLE_MAXNAMELEN];
-
-	/* User fills this in: total entry size. */
-	unsigned int size;
-
-	/* The entries. */
-	struct ipt_entry entrytable[0];
-};
-
-/* Helper functions */
-static __inline__ struct xt_entry_target *
-ipt_get_target(struct ipt_entry *e)
-{
-	return (void *)e + e->target_offset;
-}
-
-/*
- *	Main firewall chains definitions and global var's definitions.
- */
-#ifdef __KERNEL__
-
-#include <linux/init.h>
-extern void ipt_init(void) __init;
-
-extern struct xt_table *ipt_register_table(struct net *net,
-					   const struct xt_table *table,
-					   const struct ipt_replace *repl);
-extern void ipt_unregister_table(struct net *net, struct xt_table *table);
-
-/* Standard entry. */
-struct ipt_standard {
-	struct ipt_entry entry;
-	struct xt_standard_target target;
-};
-
-struct ipt_error {
-	struct ipt_entry entry;
-	struct xt_error_target target;
-};
-
-#define IPT_ENTRY_INIT(__size)						       \
-{									       \
-	.target_offset	= sizeof(struct ipt_entry),			       \
-	.next_offset	= (__size),					       \
-}
-
-#define IPT_STANDARD_INIT(__verdict)					       \
-{									       \
-	.entry		= IPT_ENTRY_INIT(sizeof(struct ipt_standard)),	       \
-	.target		= XT_TARGET_INIT(XT_STANDARD_TARGET,		       \
-					 sizeof(struct xt_standard_target)),   \
-	.target.verdict	= -(__verdict) - 1,				       \
-}
-
-#define IPT_ERROR_INIT							       \
-{									       \
-	.entry		= IPT_ENTRY_INIT(sizeof(struct ipt_error)),	       \
-	.target		= XT_TARGET_INIT(XT_ERROR_TARGET,		       \
-					 sizeof(struct xt_error_target)),      \
-	.target.errorname = "ERROR",					       \
-}
-
-extern void *ipt_alloc_initial_table(const struct xt_table *);
-extern unsigned int ipt_do_table(struct sk_buff *skb,
-				 unsigned int hook,
-				 const struct net_device *in,
-				 const struct net_device *out,
-				 struct xt_table *table);
-
-#ifdef CONFIG_COMPAT
-#include <net/compat.h>
-
-struct compat_ipt_entry {
-	struct ipt_ip ip;
-	compat_uint_t nfcache;
-	__u16 target_offset;
-	__u16 next_offset;
-	compat_uint_t comefrom;
-	struct compat_xt_counters counters;
-	unsigned char elems[0];
-};
-
-/* Helper functions */
-static inline struct xt_entry_target *
-compat_ipt_get_target(struct compat_ipt_entry *e)
-{
-	return (void *)e + e->target_offset;
-}
-
-#endif /* CONFIG_COMPAT */
-#endif /*__KERNEL__*/
-#endif /* _IPTABLES_H */
diff --git a/ANDROID_3.4.5/include/linux/netfilter_ipv4/ipt_CLUSTERIP.h b/ANDROID_3.4.5/include/linux/netfilter_ipv4/ipt_CLUSTERIP.h
deleted file mode 100644
index c6a204c9..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter_ipv4/ipt_CLUSTERIP.h
+++ /dev/null
@@ -1,36 +0,0 @@
-#ifndef _IPT_CLUSTERIP_H_target
-#define _IPT_CLUSTERIP_H_target
-
-#include <linux/types.h>
-
-enum clusterip_hashmode {
-    CLUSTERIP_HASHMODE_SIP = 0,
-    CLUSTERIP_HASHMODE_SIP_SPT,
-    CLUSTERIP_HASHMODE_SIP_SPT_DPT,
-};
-
-#define CLUSTERIP_HASHMODE_MAX CLUSTERIP_HASHMODE_SIP_SPT_DPT
-
-#define CLUSTERIP_MAX_NODES 16
-
-#define CLUSTERIP_FLAG_NEW 0x00000001
-
-struct clusterip_config;
-
-struct ipt_clusterip_tgt_info {
-
-	__u32 flags;
-
-	/* only relevant for new ones */
-	__u8 clustermac[6];
-	__u16 num_total_nodes;
-	__u16 num_local_nodes;
-	__u16 local_nodes[CLUSTERIP_MAX_NODES];
-	__u32 hash_mode;
-	__u32 hash_initval;
-
-	/* Used internally by the kernel */
-	struct clusterip_config *config;
-};
-
-#endif /*_IPT_CLUSTERIP_H_target*/
diff --git a/ANDROID_3.4.5/include/linux/netfilter_ipv4/ipt_ECN.h b/ANDROID_3.4.5/include/linux/netfilter_ipv4/ipt_ECN.h
deleted file mode 100644
index bb88d531..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter_ipv4/ipt_ECN.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/* Header file for iptables ipt_ECN target
- *
- * (C) 2002 by Harald Welte <laforge@gnumonks.org>
- *
- * This software is distributed under GNU GPL v2, 1991
- * 
- * ipt_ECN.h,v 1.3 2002/05/29 12:17:40 laforge Exp
-*/
-#ifndef _IPT_ECN_TARGET_H
-#define _IPT_ECN_TARGET_H
-
-#include <linux/types.h>
-#include <linux/netfilter/xt_DSCP.h>
-
-#define IPT_ECN_IP_MASK	(~XT_DSCP_MASK)
-
-#define IPT_ECN_OP_SET_IP	0x01	/* set ECN bits of IPv4 header */
-#define IPT_ECN_OP_SET_ECE	0x10	/* set ECE bit of TCP header */
-#define IPT_ECN_OP_SET_CWR	0x20	/* set CWR bit of TCP header */
-
-#define IPT_ECN_OP_MASK		0xce
-
-struct ipt_ECN_info {
-	__u8 operation;	/* bitset of operations */
-	__u8 ip_ect;	/* ECT codepoint of IPv4 header, pre-shifted */
-	union {
-		struct {
-			__u8 ece:1, cwr:1; /* TCP ECT bits */
-		} tcp;
-	} proto;
-};
-
-#endif /* _IPT_ECN_TARGET_H */
diff --git a/ANDROID_3.4.5/include/linux/netfilter_ipv4/ipt_LOG.h b/ANDROID_3.4.5/include/linux/netfilter_ipv4/ipt_LOG.h
deleted file mode 100644
index 5d815207..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter_ipv4/ipt_LOG.h
+++ /dev/null
@@ -1,21 +0,0 @@
-#ifndef _IPT_LOG_H
-#define _IPT_LOG_H
-
-#warning "Please update iptables, this file will be removed soon!"
-
-/* make sure not to change this without changing netfilter.h:NF_LOG_* (!) */
-#define IPT_LOG_TCPSEQ		0x01	/* Log TCP sequence numbers */
-#define IPT_LOG_TCPOPT		0x02	/* Log TCP options */
-#define IPT_LOG_IPOPT		0x04	/* Log IP options */
-#define IPT_LOG_UID		0x08	/* Log UID owning local socket */
-#define IPT_LOG_NFLOG		0x10	/* Unsupported, don't reuse */
-#define IPT_LOG_MACDECODE	0x20	/* Decode MAC header */
-#define IPT_LOG_MASK		0x2f
-
-struct ipt_log_info {
-	unsigned char level;
-	unsigned char logflags;
-	char prefix[30];
-};
-
-#endif /*_IPT_LOG_H*/
diff --git a/ANDROID_3.4.5/include/linux/netfilter_ipv4/ipt_REJECT.h b/ANDROID_3.4.5/include/linux/netfilter_ipv4/ipt_REJECT.h
deleted file mode 100644
index 4293a1ad..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter_ipv4/ipt_REJECT.h
+++ /dev/null
@@ -1,20 +0,0 @@
-#ifndef _IPT_REJECT_H
-#define _IPT_REJECT_H
-
-enum ipt_reject_with {
-	IPT_ICMP_NET_UNREACHABLE,
-	IPT_ICMP_HOST_UNREACHABLE,
-	IPT_ICMP_PROT_UNREACHABLE,
-	IPT_ICMP_PORT_UNREACHABLE,
-	IPT_ICMP_ECHOREPLY,
-	IPT_ICMP_NET_PROHIBITED,
-	IPT_ICMP_HOST_PROHIBITED,
-	IPT_TCP_RESET,
-	IPT_ICMP_ADMIN_PROHIBITED
-};
-
-struct ipt_reject_info {
-	enum ipt_reject_with with;      /* reject type */
-};
-
-#endif /*_IPT_REJECT_H*/
diff --git a/ANDROID_3.4.5/include/linux/netfilter_ipv4/ipt_TTL.h b/ANDROID_3.4.5/include/linux/netfilter_ipv4/ipt_TTL.h
deleted file mode 100644
index f6ac169d..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter_ipv4/ipt_TTL.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/* TTL modification module for IP tables
- * (C) 2000 by Harald Welte <laforge@netfilter.org> */
-
-#ifndef _IPT_TTL_H
-#define _IPT_TTL_H
-
-#include <linux/types.h>
-
-enum {
-	IPT_TTL_SET = 0,
-	IPT_TTL_INC,
-	IPT_TTL_DEC
-};
-
-#define IPT_TTL_MAXMODE	IPT_TTL_DEC
-
-struct ipt_TTL_info {
-	__u8	mode;
-	__u8	ttl;
-};
-
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/netfilter_ipv4/ipt_ULOG.h b/ANDROID_3.4.5/include/linux/netfilter_ipv4/ipt_ULOG.h
deleted file mode 100644
index 417aad28..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter_ipv4/ipt_ULOG.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/* Header file for IP tables userspace logging, Version 1.8
- *
- * (C) 2000-2002 by Harald Welte <laforge@gnumonks.org>
- * 
- * Distributed under the terms of GNU GPL */
-
-#ifndef _IPT_ULOG_H
-#define _IPT_ULOG_H
-
-#ifndef NETLINK_NFLOG
-#define NETLINK_NFLOG 	5
-#endif
-
-#define ULOG_DEFAULT_NLGROUP	1
-#define ULOG_DEFAULT_QTHRESHOLD	1
-
-#define ULOG_MAC_LEN	80
-#define ULOG_PREFIX_LEN	32
-
-#define ULOG_MAX_QLEN	50
-/* Why 50? Well... there is a limit imposed by the slab cache 131000
- * bytes. So the multipart netlink-message has to be < 131000 bytes.
- * Assuming a standard ethernet-mtu of 1500, we could define this up
- * to 80... but even 50 seems to be big enough. */
-
-/* private data structure for each rule with a ULOG target */
-struct ipt_ulog_info {
-	unsigned int nl_group;
-	size_t copy_range;
-	size_t qthreshold;
-	char prefix[ULOG_PREFIX_LEN];
-};
-
-/* Format of the ULOG packets passed through netlink */
-typedef struct ulog_packet_msg {
-	unsigned long mark;
-	long timestamp_sec;
-	long timestamp_usec;
-	unsigned int hook;
-	char indev_name[IFNAMSIZ];
-	char outdev_name[IFNAMSIZ];
-	size_t data_len;
-	char prefix[ULOG_PREFIX_LEN];
-	unsigned char mac_len;
-	unsigned char mac[ULOG_MAC_LEN];
-	unsigned char payload[0];
-} ulog_packet_msg_t;
-
-#endif /*_IPT_ULOG_H*/
diff --git a/ANDROID_3.4.5/include/linux/netfilter_ipv4/ipt_addrtype.h b/ANDROID_3.4.5/include/linux/netfilter_ipv4/ipt_addrtype.h
deleted file mode 100644
index 0da42237..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter_ipv4/ipt_addrtype.h
+++ /dev/null
@@ -1,27 +0,0 @@
-#ifndef _IPT_ADDRTYPE_H
-#define _IPT_ADDRTYPE_H
-
-#include <linux/types.h>
-
-enum {
-	IPT_ADDRTYPE_INVERT_SOURCE	= 0x0001,
-	IPT_ADDRTYPE_INVERT_DEST	= 0x0002,
-	IPT_ADDRTYPE_LIMIT_IFACE_IN	= 0x0004,
-	IPT_ADDRTYPE_LIMIT_IFACE_OUT	= 0x0008,
-};
-
-struct ipt_addrtype_info_v1 {
-	__u16	source;		/* source-type mask */
-	__u16	dest;		/* dest-type mask */
-	__u32	flags;
-};
-
-/* revision 0 */
-struct ipt_addrtype_info {
-	__u16	source;		/* source-type mask */
-	__u16	dest;		/* dest-type mask */
-	__u32	invert_source;
-	__u32	invert_dest;
-};
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/netfilter_ipv4/ipt_ah.h b/ANDROID_3.4.5/include/linux/netfilter_ipv4/ipt_ah.h
deleted file mode 100644
index 4e02bb01..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter_ipv4/ipt_ah.h
+++ /dev/null
@@ -1,17 +0,0 @@
-#ifndef _IPT_AH_H
-#define _IPT_AH_H
-
-#include <linux/types.h>
-
-struct ipt_ah {
-	__u32 spis[2];			/* Security Parameter Index */
-	__u8  invflags;			/* Inverse flags */
-};
-
-
-
-/* Values for "invflags" field in struct ipt_ah. */
-#define IPT_AH_INV_SPI		0x01	/* Invert the sense of spi. */
-#define IPT_AH_INV_MASK	0x01	/* All possible flags. */
-
-#endif /*_IPT_AH_H*/
diff --git a/ANDROID_3.4.5/include/linux/netfilter_ipv4/ipt_ecn.h b/ANDROID_3.4.5/include/linux/netfilter_ipv4/ipt_ecn.h
deleted file mode 100644
index 0e0c063d..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter_ipv4/ipt_ecn.h
+++ /dev/null
@@ -1,15 +0,0 @@
-#ifndef _IPT_ECN_H
-#define _IPT_ECN_H
-
-#include <linux/netfilter/xt_ecn.h>
-#define ipt_ecn_info xt_ecn_info
-
-enum {
-	IPT_ECN_IP_MASK       = XT_ECN_IP_MASK,
-	IPT_ECN_OP_MATCH_IP   = XT_ECN_OP_MATCH_IP,
-	IPT_ECN_OP_MATCH_ECE  = XT_ECN_OP_MATCH_ECE,
-	IPT_ECN_OP_MATCH_CWR  = XT_ECN_OP_MATCH_CWR,
-	IPT_ECN_OP_MATCH_MASK = XT_ECN_OP_MATCH_MASK,
-};
-
-#endif /* IPT_ECN_H */
diff --git a/ANDROID_3.4.5/include/linux/netfilter_ipv4/ipt_ttl.h b/ANDROID_3.4.5/include/linux/netfilter_ipv4/ipt_ttl.h
deleted file mode 100644
index 37bee444..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter_ipv4/ipt_ttl.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/* IP tables module for matching the value of the TTL
- * (C) 2000 by Harald Welte <laforge@gnumonks.org> */
-
-#ifndef _IPT_TTL_H
-#define _IPT_TTL_H
-
-#include <linux/types.h>
-
-enum {
-	IPT_TTL_EQ = 0,		/* equals */
-	IPT_TTL_NE,		/* not equals */
-	IPT_TTL_LT,		/* less than */
-	IPT_TTL_GT,		/* greater than */
-};
-
-
-struct ipt_ttl_info {
-	__u8	mode;
-	__u8	ttl;
-};
-
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/netfilter_ipv6.h b/ANDROID_3.4.5/include/linux/netfilter_ipv6.h
deleted file mode 100644
index 57c02512..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter_ipv6.h
+++ /dev/null
@@ -1,93 +0,0 @@
-#ifndef __LINUX_IP6_NETFILTER_H
-#define __LINUX_IP6_NETFILTER_H
-
-/* IPv6-specific defines for netfilter. 
- * (C)1998 Rusty Russell -- This code is GPL.
- * (C)1999 David Jeffery
- *   this header was blatantly ripped from netfilter_ipv4.h 
- *   it's amazing what adding a bunch of 6s can do =8^)
- */
-
-#include <linux/netfilter.h>
-
-/* only for userspace compatibility */
-#ifndef __KERNEL__
-
-#include <limits.h> /* for INT_MIN, INT_MAX */
-
-/* IP Cache bits. */
-/* Src IP address. */
-#define NFC_IP6_SRC              0x0001
-/* Dest IP address. */
-#define NFC_IP6_DST              0x0002
-/* Input device. */
-#define NFC_IP6_IF_IN            0x0004
-/* Output device. */
-#define NFC_IP6_IF_OUT           0x0008
-/* TOS. */
-#define NFC_IP6_TOS              0x0010
-/* Protocol. */
-#define NFC_IP6_PROTO            0x0020
-/* IP options. */
-#define NFC_IP6_OPTIONS          0x0040
-/* Frag & flags. */
-#define NFC_IP6_FRAG             0x0080
-
-
-/* Per-protocol information: only matters if proto match. */
-/* TCP flags. */
-#define NFC_IP6_TCPFLAGS         0x0100
-/* Source port. */
-#define NFC_IP6_SRC_PT           0x0200
-/* Dest port. */
-#define NFC_IP6_DST_PT           0x0400
-/* Something else about the proto */
-#define NFC_IP6_PROTO_UNKNOWN    0x2000
-
-/* IP6 Hooks */
-/* After promisc drops, checksum checks. */
-#define NF_IP6_PRE_ROUTING	0
-/* If the packet is destined for this box. */
-#define NF_IP6_LOCAL_IN		1
-/* If the packet is destined for another interface. */
-#define NF_IP6_FORWARD		2
-/* Packets coming from a local process. */
-#define NF_IP6_LOCAL_OUT		3
-/* Packets about to hit the wire. */
-#define NF_IP6_POST_ROUTING	4
-#define NF_IP6_NUMHOOKS		5
-#endif /* ! __KERNEL__ */
-
-
-enum nf_ip6_hook_priorities {
-	NF_IP6_PRI_FIRST = INT_MIN,
-	NF_IP6_PRI_CONNTRACK_DEFRAG = -400,
-	NF_IP6_PRI_RAW = -300,
-	NF_IP6_PRI_SELINUX_FIRST = -225,
-	NF_IP6_PRI_CONNTRACK = -200,
-	NF_IP6_PRI_MANGLE = -150,
-	NF_IP6_PRI_NAT_DST = -100,
-	NF_IP6_PRI_FILTER = 0,
-	NF_IP6_PRI_SECURITY = 50,
-	NF_IP6_PRI_NAT_SRC = 100,
-	NF_IP6_PRI_SELINUX_LAST = 225,
-	NF_IP6_PRI_LAST = INT_MAX,
-};
-
-#ifdef  __KERNEL__
-
-#ifdef CONFIG_NETFILTER
-extern int ip6_route_me_harder(struct sk_buff *skb);
-extern __sum16 nf_ip6_checksum(struct sk_buff *skb, unsigned int hook,
-				    unsigned int dataoff, u_int8_t protocol);
-
-extern int ipv6_netfilter_init(void);
-extern void ipv6_netfilter_fini(void);
-#else /* CONFIG_NETFILTER */
-static inline int ipv6_netfilter_init(void) { return 0; }
-static inline void ipv6_netfilter_fini(void) { return; }
-#endif /* CONFIG_NETFILTER */
-
-#endif /* __KERNEL__ */
-
-#endif /*__LINUX_IP6_NETFILTER_H*/
diff --git a/ANDROID_3.4.5/include/linux/netfilter_ipv6/Kbuild b/ANDROID_3.4.5/include/linux/netfilter_ipv6/Kbuild
deleted file mode 100644
index bd095bc0..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter_ipv6/Kbuild
+++ /dev/null
@@ -1,11 +0,0 @@
-header-y += ip6_tables.h
-header-y += ip6t_HL.h
-header-y += ip6t_LOG.h
-header-y += ip6t_REJECT.h
-header-y += ip6t_ah.h
-header-y += ip6t_frag.h
-header-y += ip6t_hl.h
-header-y += ip6t_ipv6header.h
-header-y += ip6t_mh.h
-header-y += ip6t_opts.h
-header-y += ip6t_rt.h
diff --git a/ANDROID_3.4.5/include/linux/netfilter_ipv6/ip6_tables.h b/ANDROID_3.4.5/include/linux/netfilter_ipv6/ip6_tables.h
deleted file mode 100644
index 1bc898b1..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter_ipv6/ip6_tables.h
+++ /dev/null
@@ -1,326 +0,0 @@
-/*
- * 25-Jul-1998 Major changes to allow for ip chain table
- *
- * 3-Jan-2000 Named tables to allow packet selection for different uses.
- */
-
-/*
- * 	Format of an IP6 firewall descriptor
- *
- * 	src, dst, src_mask, dst_mask are always stored in network byte order.
- * 	flags are stored in host byte order (of course).
- * 	Port numbers are stored in HOST byte order.
- */
-
-#ifndef _IP6_TABLES_H
-#define _IP6_TABLES_H
-
-#ifdef __KERNEL__
-#include <linux/if.h>
-#include <linux/in6.h>
-#include <linux/ipv6.h>
-#include <linux/skbuff.h>
-#endif
-#include <linux/types.h>
-#include <linux/compiler.h>
-#include <linux/netfilter_ipv6.h>
-
-#include <linux/netfilter/x_tables.h>
-
-#ifndef __KERNEL__
-#define IP6T_FUNCTION_MAXNAMELEN XT_FUNCTION_MAXNAMELEN
-#define IP6T_TABLE_MAXNAMELEN XT_TABLE_MAXNAMELEN
-#define ip6t_match xt_match
-#define ip6t_target xt_target
-#define ip6t_table xt_table
-#define ip6t_get_revision xt_get_revision
-#define ip6t_entry_match xt_entry_match
-#define ip6t_entry_target xt_entry_target
-#define ip6t_standard_target xt_standard_target
-#define ip6t_error_target xt_error_target
-#define ip6t_counters xt_counters
-#define IP6T_CONTINUE XT_CONTINUE
-#define IP6T_RETURN XT_RETURN
-
-/* Pre-iptables-1.4.0 */
-#include <linux/netfilter/xt_tcpudp.h>
-#define ip6t_tcp xt_tcp
-#define ip6t_udp xt_udp
-#define IP6T_TCP_INV_SRCPT	XT_TCP_INV_SRCPT
-#define IP6T_TCP_INV_DSTPT	XT_TCP_INV_DSTPT
-#define IP6T_TCP_INV_FLAGS	XT_TCP_INV_FLAGS
-#define IP6T_TCP_INV_OPTION	XT_TCP_INV_OPTION
-#define IP6T_TCP_INV_MASK	XT_TCP_INV_MASK
-#define IP6T_UDP_INV_SRCPT	XT_UDP_INV_SRCPT
-#define IP6T_UDP_INV_DSTPT	XT_UDP_INV_DSTPT
-#define IP6T_UDP_INV_MASK	XT_UDP_INV_MASK
-
-#define ip6t_counters_info xt_counters_info
-#define IP6T_STANDARD_TARGET XT_STANDARD_TARGET
-#define IP6T_ERROR_TARGET XT_ERROR_TARGET
-#define IP6T_MATCH_ITERATE(e, fn, args...) \
-	XT_MATCH_ITERATE(struct ip6t_entry, e, fn, ## args)
-#define IP6T_ENTRY_ITERATE(entries, size, fn, args...) \
-	XT_ENTRY_ITERATE(struct ip6t_entry, entries, size, fn, ## args)
-#endif
-
-/* Yes, Virginia, you have to zero the padding. */
-struct ip6t_ip6 {
-	/* Source and destination IP6 addr */
-	struct in6_addr src, dst;		
-	/* Mask for src and dest IP6 addr */
-	struct in6_addr smsk, dmsk;
-	char iniface[IFNAMSIZ], outiface[IFNAMSIZ];
-	unsigned char iniface_mask[IFNAMSIZ], outiface_mask[IFNAMSIZ];
-
-	/* Upper protocol number
-	 * - The allowed value is 0 (any) or protocol number of last parsable
-	 *   header, which is 50 (ESP), 59 (No Next Header), 135 (MH), or
-	 *   the non IPv6 extension headers.
-	 * - The protocol numbers of IPv6 extension headers except of ESP and
-	 *   MH do not match any packets.
-	 * - You also need to set IP6T_FLAGS_PROTO to "flags" to check protocol.
-	 */
-	__u16 proto;
-	/* TOS to match iff flags & IP6T_F_TOS */
-	__u8 tos;
-
-	/* Flags word */
-	__u8 flags;
-	/* Inverse flags */
-	__u8 invflags;
-};
-
-/* Values for "flag" field in struct ip6t_ip6 (general ip6 structure). */
-#define IP6T_F_PROTO		0x01	/* Set if rule cares about upper 
-					   protocols */
-#define IP6T_F_TOS		0x02	/* Match the TOS. */
-#define IP6T_F_GOTO		0x04	/* Set if jump is a goto */
-#define IP6T_F_MASK		0x07	/* All possible flag bits mask. */
-
-/* Values for "inv" field in struct ip6t_ip6. */
-#define IP6T_INV_VIA_IN		0x01	/* Invert the sense of IN IFACE. */
-#define IP6T_INV_VIA_OUT		0x02	/* Invert the sense of OUT IFACE */
-#define IP6T_INV_TOS		0x04	/* Invert the sense of TOS. */
-#define IP6T_INV_SRCIP		0x08	/* Invert the sense of SRC IP. */
-#define IP6T_INV_DSTIP		0x10	/* Invert the sense of DST OP. */
-#define IP6T_INV_FRAG		0x20	/* Invert the sense of FRAG. */
-#define IP6T_INV_PROTO		XT_INV_PROTO
-#define IP6T_INV_MASK		0x7F	/* All possible flag bits mask. */
-
-/* This structure defines each of the firewall rules.  Consists of 3
-   parts which are 1) general IP header stuff 2) match specific
-   stuff 3) the target to perform if the rule matches */
-struct ip6t_entry {
-	struct ip6t_ip6 ipv6;
-
-	/* Mark with fields that we care about. */
-	unsigned int nfcache;
-
-	/* Size of ipt_entry + matches */
-	__u16 target_offset;
-	/* Size of ipt_entry + matches + target */
-	__u16 next_offset;
-
-	/* Back pointer */
-	unsigned int comefrom;
-
-	/* Packet and byte counters. */
-	struct xt_counters counters;
-
-	/* The matches (if any), then the target. */
-	unsigned char elems[0];
-};
-
-/* Standard entry */
-struct ip6t_standard {
-	struct ip6t_entry entry;
-	struct xt_standard_target target;
-};
-
-struct ip6t_error {
-	struct ip6t_entry entry;
-	struct xt_error_target target;
-};
-
-#define IP6T_ENTRY_INIT(__size)						       \
-{									       \
-	.target_offset	= sizeof(struct ip6t_entry),			       \
-	.next_offset	= (__size),					       \
-}
-
-#define IP6T_STANDARD_INIT(__verdict)					       \
-{									       \
-	.entry		= IP6T_ENTRY_INIT(sizeof(struct ip6t_standard)),       \
-	.target		= XT_TARGET_INIT(XT_STANDARD_TARGET,		       \
-					 sizeof(struct xt_standard_target)),   \
-	.target.verdict	= -(__verdict) - 1,				       \
-}
-
-#define IP6T_ERROR_INIT							       \
-{									       \
-	.entry		= IP6T_ENTRY_INIT(sizeof(struct ip6t_error)),	       \
-	.target		= XT_TARGET_INIT(XT_ERROR_TARGET,		       \
-					 sizeof(struct xt_error_target)),      \
-	.target.errorname = "ERROR",					       \
-}
-
-/*
- * New IP firewall options for [gs]etsockopt at the RAW IP level.
- * Unlike BSD Linux inherits IP options so you don't have to use
- * a raw socket for this. Instead we check rights in the calls.
- *
- * ATTENTION: check linux/in6.h before adding new number here.
- */
-#define IP6T_BASE_CTL			64
-
-#define IP6T_SO_SET_REPLACE		(IP6T_BASE_CTL)
-#define IP6T_SO_SET_ADD_COUNTERS	(IP6T_BASE_CTL + 1)
-#define IP6T_SO_SET_MAX			IP6T_SO_SET_ADD_COUNTERS
-
-#define IP6T_SO_GET_INFO		(IP6T_BASE_CTL)
-#define IP6T_SO_GET_ENTRIES		(IP6T_BASE_CTL + 1)
-#define IP6T_SO_GET_REVISION_MATCH	(IP6T_BASE_CTL + 4)
-#define IP6T_SO_GET_REVISION_TARGET	(IP6T_BASE_CTL + 5)
-#define IP6T_SO_GET_MAX			IP6T_SO_GET_REVISION_TARGET
-
-/* ICMP matching stuff */
-struct ip6t_icmp {
-	__u8 type;				/* type to match */
-	__u8 code[2];				/* range of code */
-	__u8 invflags;				/* Inverse flags */
-};
-
-/* Values for "inv" field for struct ipt_icmp. */
-#define IP6T_ICMP_INV	0x01	/* Invert the sense of type/code test */
-
-/* The argument to IP6T_SO_GET_INFO */
-struct ip6t_getinfo {
-	/* Which table: caller fills this in. */
-	char name[XT_TABLE_MAXNAMELEN];
-
-	/* Kernel fills these in. */
-	/* Which hook entry points are valid: bitmask */
-	unsigned int valid_hooks;
-
-	/* Hook entry points: one per netfilter hook. */
-	unsigned int hook_entry[NF_INET_NUMHOOKS];
-
-	/* Underflow points. */
-	unsigned int underflow[NF_INET_NUMHOOKS];
-
-	/* Number of entries */
-	unsigned int num_entries;
-
-	/* Size of entries. */
-	unsigned int size;
-};
-
-/* The argument to IP6T_SO_SET_REPLACE. */
-struct ip6t_replace {
-	/* Which table. */
-	char name[XT_TABLE_MAXNAMELEN];
-
-	/* Which hook entry points are valid: bitmask.  You can't
-           change this. */
-	unsigned int valid_hooks;
-
-	/* Number of entries */
-	unsigned int num_entries;
-
-	/* Total size of new entries */
-	unsigned int size;
-
-	/* Hook entry points. */
-	unsigned int hook_entry[NF_INET_NUMHOOKS];
-
-	/* Underflow points. */
-	unsigned int underflow[NF_INET_NUMHOOKS];
-
-	/* Information about old entries: */
-	/* Number of counters (must be equal to current number of entries). */
-	unsigned int num_counters;
-	/* The old entries' counters. */
-	struct xt_counters __user *counters;
-
-	/* The entries (hang off end: not really an array). */
-	struct ip6t_entry entries[0];
-};
-
-/* The argument to IP6T_SO_GET_ENTRIES. */
-struct ip6t_get_entries {
-	/* Which table: user fills this in. */
-	char name[XT_TABLE_MAXNAMELEN];
-
-	/* User fills this in: total entry size. */
-	unsigned int size;
-
-	/* The entries. */
-	struct ip6t_entry entrytable[0];
-};
-
-/* Helper functions */
-static __inline__ struct xt_entry_target *
-ip6t_get_target(struct ip6t_entry *e)
-{
-	return (void *)e + e->target_offset;
-}
-
-/*
- *	Main firewall chains definitions and global var's definitions.
- */
-
-#ifdef __KERNEL__
-
-#include <linux/init.h>
-extern void ip6t_init(void) __init;
-
-extern void *ip6t_alloc_initial_table(const struct xt_table *);
-extern struct xt_table *ip6t_register_table(struct net *net,
-					    const struct xt_table *table,
-					    const struct ip6t_replace *repl);
-extern void ip6t_unregister_table(struct net *net, struct xt_table *table);
-extern unsigned int ip6t_do_table(struct sk_buff *skb,
-				  unsigned int hook,
-				  const struct net_device *in,
-				  const struct net_device *out,
-				  struct xt_table *table);
-
-/* Check for an extension */
-static inline int
-ip6t_ext_hdr(u8 nexthdr)
-{	return (nexthdr == IPPROTO_HOPOPTS) ||
-	       (nexthdr == IPPROTO_ROUTING) ||
-	       (nexthdr == IPPROTO_FRAGMENT) ||
-	       (nexthdr == IPPROTO_ESP) ||
-	       (nexthdr == IPPROTO_AH) ||
-	       (nexthdr == IPPROTO_NONE) ||
-	       (nexthdr == IPPROTO_DSTOPTS);
-}
-
-/* find specified header and get offset to it */
-extern int ipv6_find_hdr(const struct sk_buff *skb, unsigned int *offset,
-			 int target, unsigned short *fragoff);
-
-#ifdef CONFIG_COMPAT
-#include <net/compat.h>
-
-struct compat_ip6t_entry {
-	struct ip6t_ip6 ipv6;
-	compat_uint_t nfcache;
-	__u16 target_offset;
-	__u16 next_offset;
-	compat_uint_t comefrom;
-	struct compat_xt_counters counters;
-	unsigned char elems[0];
-};
-
-static inline struct xt_entry_target *
-compat_ip6t_get_target(struct compat_ip6t_entry *e)
-{
-	return (void *)e + e->target_offset;
-}
-
-#endif /* CONFIG_COMPAT */
-#endif /*__KERNEL__*/
-#endif /* _IP6_TABLES_H */
diff --git a/ANDROID_3.4.5/include/linux/netfilter_ipv6/ip6t_HL.h b/ANDROID_3.4.5/include/linux/netfilter_ipv6/ip6t_HL.h
deleted file mode 100644
index ebd8ead1..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter_ipv6/ip6t_HL.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/* Hop Limit modification module for ip6tables
- * Maciej Soltysiak <solt@dns.toxicfilms.tv>
- * Based on HW's TTL module */
-
-#ifndef _IP6T_HL_H
-#define _IP6T_HL_H
-
-#include <linux/types.h>
-
-enum {
-	IP6T_HL_SET = 0,
-	IP6T_HL_INC,
-	IP6T_HL_DEC
-};
-
-#define IP6T_HL_MAXMODE	IP6T_HL_DEC
-
-struct ip6t_HL_info {
-	__u8	mode;
-	__u8	hop_limit;
-};
-
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/netfilter_ipv6/ip6t_LOG.h b/ANDROID_3.4.5/include/linux/netfilter_ipv6/ip6t_LOG.h
deleted file mode 100644
index 3dd0bc4e..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter_ipv6/ip6t_LOG.h
+++ /dev/null
@@ -1,21 +0,0 @@
-#ifndef _IP6T_LOG_H
-#define _IP6T_LOG_H
-
-#warning "Please update iptables, this file will be removed soon!"
-
-/* make sure not to change this without changing netfilter.h:NF_LOG_* (!) */
-#define IP6T_LOG_TCPSEQ		0x01	/* Log TCP sequence numbers */
-#define IP6T_LOG_TCPOPT		0x02	/* Log TCP options */
-#define IP6T_LOG_IPOPT		0x04	/* Log IP options */
-#define IP6T_LOG_UID		0x08	/* Log UID owning local socket */
-#define IP6T_LOG_NFLOG		0x10	/* Unsupported, don't use */
-#define IP6T_LOG_MACDECODE	0x20	/* Decode MAC header */
-#define IP6T_LOG_MASK		0x2f
-
-struct ip6t_log_info {
-	unsigned char level;
-	unsigned char logflags;
-	char prefix[30];
-};
-
-#endif /*_IPT_LOG_H*/
diff --git a/ANDROID_3.4.5/include/linux/netfilter_ipv6/ip6t_REJECT.h b/ANDROID_3.4.5/include/linux/netfilter_ipv6/ip6t_REJECT.h
deleted file mode 100644
index 205ed62e..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter_ipv6/ip6t_REJECT.h
+++ /dev/null
@@ -1,20 +0,0 @@
-#ifndef _IP6T_REJECT_H
-#define _IP6T_REJECT_H
-
-#include <linux/types.h>
-
-enum ip6t_reject_with {
-	IP6T_ICMP6_NO_ROUTE,
-	IP6T_ICMP6_ADM_PROHIBITED,
-	IP6T_ICMP6_NOT_NEIGHBOUR,
-	IP6T_ICMP6_ADDR_UNREACH,
-	IP6T_ICMP6_PORT_UNREACH,
-	IP6T_ICMP6_ECHOREPLY,
-	IP6T_TCP_RESET
-};
-
-struct ip6t_reject_info {
-	__u32	with;	/* reject type */
-};
-
-#endif /*_IP6T_REJECT_H*/
diff --git a/ANDROID_3.4.5/include/linux/netfilter_ipv6/ip6t_ah.h b/ANDROID_3.4.5/include/linux/netfilter_ipv6/ip6t_ah.h
deleted file mode 100644
index 5da2b65c..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter_ipv6/ip6t_ah.h
+++ /dev/null
@@ -1,22 +0,0 @@
-#ifndef _IP6T_AH_H
-#define _IP6T_AH_H
-
-#include <linux/types.h>
-
-struct ip6t_ah {
-	__u32 spis[2];			/* Security Parameter Index */
-	__u32 hdrlen;			/* Header Length */
-	__u8  hdrres;			/* Test of the Reserved Filed */
-	__u8  invflags;			/* Inverse flags */
-};
-
-#define IP6T_AH_SPI 0x01
-#define IP6T_AH_LEN 0x02
-#define IP6T_AH_RES 0x04
-
-/* Values for "invflags" field in struct ip6t_ah. */
-#define IP6T_AH_INV_SPI		0x01	/* Invert the sense of spi. */
-#define IP6T_AH_INV_LEN		0x02	/* Invert the sense of length. */
-#define IP6T_AH_INV_MASK	0x03	/* All possible flags. */
-
-#endif /*_IP6T_AH_H*/
diff --git a/ANDROID_3.4.5/include/linux/netfilter_ipv6/ip6t_frag.h b/ANDROID_3.4.5/include/linux/netfilter_ipv6/ip6t_frag.h
deleted file mode 100644
index b47f61b9..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter_ipv6/ip6t_frag.h
+++ /dev/null
@@ -1,25 +0,0 @@
-#ifndef _IP6T_FRAG_H
-#define _IP6T_FRAG_H
-
-#include <linux/types.h>
-
-struct ip6t_frag {
-	__u32 ids[2];			/* Security Parameter Index */
-	__u32 hdrlen;			/* Header Length */
-	__u8  flags;			/*  */
-	__u8  invflags;			/* Inverse flags */
-};
-
-#define IP6T_FRAG_IDS 		0x01
-#define IP6T_FRAG_LEN 		0x02
-#define IP6T_FRAG_RES 		0x04
-#define IP6T_FRAG_FST 		0x08
-#define IP6T_FRAG_MF  		0x10
-#define IP6T_FRAG_NMF  		0x20
-
-/* Values for "invflags" field in struct ip6t_frag. */
-#define IP6T_FRAG_INV_IDS	0x01	/* Invert the sense of ids. */
-#define IP6T_FRAG_INV_LEN	0x02	/* Invert the sense of length. */
-#define IP6T_FRAG_INV_MASK	0x03	/* All possible flags. */
-
-#endif /*_IP6T_FRAG_H*/
diff --git a/ANDROID_3.4.5/include/linux/netfilter_ipv6/ip6t_hl.h b/ANDROID_3.4.5/include/linux/netfilter_ipv6/ip6t_hl.h
deleted file mode 100644
index 6e76dbc6..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter_ipv6/ip6t_hl.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/* ip6tables module for matching the Hop Limit value
- * Maciej Soltysiak <solt@dns.toxicfilms.tv>
- * Based on HW's ttl module */
-
-#ifndef _IP6T_HL_H
-#define _IP6T_HL_H
-
-#include <linux/types.h>
-
-enum {
-	IP6T_HL_EQ = 0,		/* equals */
-	IP6T_HL_NE,		/* not equals */
-	IP6T_HL_LT,		/* less than */
-	IP6T_HL_GT,		/* greater than */
-};
-
-
-struct ip6t_hl_info {
-	__u8	mode;
-	__u8	hop_limit;
-};
-
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/netfilter_ipv6/ip6t_ipv6header.h b/ANDROID_3.4.5/include/linux/netfilter_ipv6/ip6t_ipv6header.h
deleted file mode 100644
index efae3a20..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter_ipv6/ip6t_ipv6header.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/* ipv6header match - matches IPv6 packets based
-on whether they contain certain headers */
-
-/* Original idea: Brad Chapman 
- * Rewritten by: Andras Kis-Szabo <kisza@sch.bme.hu> */
-
-
-#ifndef __IPV6HEADER_H
-#define __IPV6HEADER_H
-
-#include <linux/types.h>
-
-struct ip6t_ipv6header_info {
-	__u8 matchflags;
-	__u8 invflags;
-	__u8 modeflag;
-};
-
-#define MASK_HOPOPTS    128
-#define MASK_DSTOPTS    64
-#define MASK_ROUTING    32
-#define MASK_FRAGMENT   16
-#define MASK_AH         8
-#define MASK_ESP        4
-#define MASK_NONE       2
-#define MASK_PROTO      1
-
-#endif /* __IPV6HEADER_H */
diff --git a/ANDROID_3.4.5/include/linux/netfilter_ipv6/ip6t_mh.h b/ANDROID_3.4.5/include/linux/netfilter_ipv6/ip6t_mh.h
deleted file mode 100644
index a7729a50..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter_ipv6/ip6t_mh.h
+++ /dev/null
@@ -1,16 +0,0 @@
-#ifndef _IP6T_MH_H
-#define _IP6T_MH_H
-
-#include <linux/types.h>
-
-/* MH matching stuff */
-struct ip6t_mh {
-	__u8 types[2];	/* MH type range */
-	__u8 invflags;	/* Inverse flags */
-};
-
-/* Values for "invflags" field in struct ip6t_mh. */
-#define IP6T_MH_INV_TYPE	0x01	/* Invert the sense of type. */
-#define IP6T_MH_INV_MASK	0x01	/* All possible flags. */
-
-#endif /*_IP6T_MH_H*/
diff --git a/ANDROID_3.4.5/include/linux/netfilter_ipv6/ip6t_opts.h b/ANDROID_3.4.5/include/linux/netfilter_ipv6/ip6t_opts.h
deleted file mode 100644
index 17d419a8..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter_ipv6/ip6t_opts.h
+++ /dev/null
@@ -1,24 +0,0 @@
-#ifndef _IP6T_OPTS_H
-#define _IP6T_OPTS_H
-
-#include <linux/types.h>
-
-#define IP6T_OPTS_OPTSNR 16
-
-struct ip6t_opts {
-	__u32 hdrlen;			/* Header Length */
-	__u8 flags;				/*  */
-	__u8 invflags;			/* Inverse flags */
-	__u16 opts[IP6T_OPTS_OPTSNR];	/* opts */
-	__u8 optsnr;			/* Nr of OPts */
-};
-
-#define IP6T_OPTS_LEN 		0x01
-#define IP6T_OPTS_OPTS 		0x02
-#define IP6T_OPTS_NSTRICT	0x04
-
-/* Values for "invflags" field in struct ip6t_rt. */
-#define IP6T_OPTS_INV_LEN	0x01	/* Invert the sense of length. */
-#define IP6T_OPTS_INV_MASK	0x01	/* All possible flags. */
-
-#endif /*_IP6T_OPTS_H*/
diff --git a/ANDROID_3.4.5/include/linux/netfilter_ipv6/ip6t_rt.h b/ANDROID_3.4.5/include/linux/netfilter_ipv6/ip6t_rt.h
deleted file mode 100644
index 7605a5ff..00000000
--- a/ANDROID_3.4.5/include/linux/netfilter_ipv6/ip6t_rt.h
+++ /dev/null
@@ -1,33 +0,0 @@
-#ifndef _IP6T_RT_H
-#define _IP6T_RT_H
-
-#include <linux/types.h>
-/*#include <linux/in6.h>*/
-
-#define IP6T_RT_HOPS 16
-
-struct ip6t_rt {
-	__u32 rt_type;			/* Routing Type */
-	__u32 segsleft[2];			/* Segments Left */
-	__u32 hdrlen;			/* Header Length */
-	__u8  flags;			/*  */
-	__u8  invflags;			/* Inverse flags */
-	struct in6_addr addrs[IP6T_RT_HOPS];	/* Hops */
-	__u8 addrnr;			/* Nr of Addresses */
-};
-
-#define IP6T_RT_TYP 		0x01
-#define IP6T_RT_SGS 		0x02
-#define IP6T_RT_LEN 		0x04
-#define IP6T_RT_RES 		0x08
-#define IP6T_RT_FST_MASK	0x30
-#define IP6T_RT_FST 		0x10
-#define IP6T_RT_FST_NSTRICT	0x20
-
-/* Values for "invflags" field in struct ip6t_rt. */
-#define IP6T_RT_INV_TYP		0x01	/* Invert the sense of type. */
-#define IP6T_RT_INV_SGS		0x02	/* Invert the sense of Segments. */
-#define IP6T_RT_INV_LEN		0x04	/* Invert the sense of length. */
-#define IP6T_RT_INV_MASK	0x07	/* All possible flags. */
-
-#endif /*_IP6T_RT_H*/
diff --git a/ANDROID_3.4.5/include/linux/netlink.h b/ANDROID_3.4.5/include/linux/netlink.h
deleted file mode 100644
index a2092f58..00000000
--- a/ANDROID_3.4.5/include/linux/netlink.h
+++ /dev/null
@@ -1,270 +0,0 @@
-#ifndef __LINUX_NETLINK_H
-#define __LINUX_NETLINK_H
-
-#include <linux/socket.h> /* for __kernel_sa_family_t */
-#include <linux/types.h>
-
-#define NETLINK_ROUTE		0	/* Routing/device hook				*/
-#define NETLINK_UNUSED		1	/* Unused number				*/
-#define NETLINK_USERSOCK	2	/* Reserved for user mode socket protocols 	*/
-#define NETLINK_FIREWALL	3	/* Firewalling hook				*/
-#define NETLINK_SOCK_DIAG	4	/* socket monitoring				*/
-#define NETLINK_NFLOG		5	/* netfilter/iptables ULOG */
-#define NETLINK_XFRM		6	/* ipsec */
-#define NETLINK_SELINUX		7	/* SELinux event notifications */
-#define NETLINK_ISCSI		8	/* Open-iSCSI */
-#define NETLINK_AUDIT		9	/* auditing */
-#define NETLINK_FIB_LOOKUP	10	
-#define NETLINK_CONNECTOR	11
-#define NETLINK_NETFILTER	12	/* netfilter subsystem */
-#define NETLINK_IP6_FW		13
-#define NETLINK_DNRTMSG		14	/* DECnet routing messages */
-#define NETLINK_KOBJECT_UEVENT	15	/* Kernel messages to userspace */
-#define NETLINK_GENERIC		16
-/* leave room for NETLINK_DM (DM Events) */
-#define NETLINK_SCSITRANSPORT	18	/* SCSI Transports */
-#define NETLINK_ECRYPTFS	19
-#define NETLINK_RDMA		20
-#define NETLINK_CRYPTO		21	/* Crypto layer */
-
-#define NETLINK_INET_DIAG	NETLINK_SOCK_DIAG
-
-#define MAX_LINKS 32		
-
-struct sockaddr_nl {
-	__kernel_sa_family_t	nl_family;	/* AF_NETLINK	*/
-	unsigned short	nl_pad;		/* zero		*/
-	__u32		nl_pid;		/* port ID	*/
-       	__u32		nl_groups;	/* multicast groups mask */
-};
-
-struct nlmsghdr {
-	__u32		nlmsg_len;	/* Length of message including header */
-	__u16		nlmsg_type;	/* Message content */
-	__u16		nlmsg_flags;	/* Additional flags */
-	__u32		nlmsg_seq;	/* Sequence number */
-	__u32		nlmsg_pid;	/* Sending process port ID */
-};
-
-/* Flags values */
-
-#define NLM_F_REQUEST		1	/* It is request message. 	*/
-#define NLM_F_MULTI		2	/* Multipart message, terminated by NLMSG_DONE */
-#define NLM_F_ACK		4	/* Reply with ack, with zero or error code */
-#define NLM_F_ECHO		8	/* Echo this request 		*/
-#define NLM_F_DUMP_INTR		16	/* Dump was inconsistent due to sequence change */
-
-/* Modifiers to GET request */
-#define NLM_F_ROOT	0x100	/* specify tree	root	*/
-#define NLM_F_MATCH	0x200	/* return all matching	*/
-#define NLM_F_ATOMIC	0x400	/* atomic GET		*/
-#define NLM_F_DUMP	(NLM_F_ROOT|NLM_F_MATCH)
-
-/* Modifiers to NEW request */
-#define NLM_F_REPLACE	0x100	/* Override existing		*/
-#define NLM_F_EXCL	0x200	/* Do not touch, if it exists	*/
-#define NLM_F_CREATE	0x400	/* Create, if it does not exist	*/
-#define NLM_F_APPEND	0x800	/* Add to end of list		*/
-
-/*
-   4.4BSD ADD		NLM_F_CREATE|NLM_F_EXCL
-   4.4BSD CHANGE	NLM_F_REPLACE
-
-   True CHANGE		NLM_F_CREATE|NLM_F_REPLACE
-   Append		NLM_F_CREATE
-   Check		NLM_F_EXCL
- */
-
-#define NLMSG_ALIGNTO	4U
-#define NLMSG_ALIGN(len) ( ((len)+NLMSG_ALIGNTO-1) & ~(NLMSG_ALIGNTO-1) )
-#define NLMSG_HDRLEN	 ((int) NLMSG_ALIGN(sizeof(struct nlmsghdr)))
-#define NLMSG_LENGTH(len) ((len)+NLMSG_ALIGN(NLMSG_HDRLEN))
-#define NLMSG_SPACE(len) NLMSG_ALIGN(NLMSG_LENGTH(len))
-#define NLMSG_DATA(nlh)  ((void*)(((char*)nlh) + NLMSG_LENGTH(0)))
-#define NLMSG_NEXT(nlh,len)	 ((len) -= NLMSG_ALIGN((nlh)->nlmsg_len), \
-				  (struct nlmsghdr*)(((char*)(nlh)) + NLMSG_ALIGN((nlh)->nlmsg_len)))
-#define NLMSG_OK(nlh,len) ((len) >= (int)sizeof(struct nlmsghdr) && \
-			   (nlh)->nlmsg_len >= sizeof(struct nlmsghdr) && \
-			   (nlh)->nlmsg_len <= (len))
-#define NLMSG_PAYLOAD(nlh,len) ((nlh)->nlmsg_len - NLMSG_SPACE((len)))
-
-#define NLMSG_NOOP		0x1	/* Nothing.		*/
-#define NLMSG_ERROR		0x2	/* Error		*/
-#define NLMSG_DONE		0x3	/* End of a dump	*/
-#define NLMSG_OVERRUN		0x4	/* Data lost		*/
-
-#define NLMSG_MIN_TYPE		0x10	/* < 0x10: reserved control messages */
-
-struct nlmsgerr {
-	int		error;
-	struct nlmsghdr msg;
-};
-
-#define NETLINK_ADD_MEMBERSHIP	1
-#define NETLINK_DROP_MEMBERSHIP	2
-#define NETLINK_PKTINFO		3
-#define NETLINK_BROADCAST_ERROR	4
-#define NETLINK_NO_ENOBUFS	5
-
-struct nl_pktinfo {
-	__u32	group;
-};
-
-#define NET_MAJOR 36		/* Major 36 is reserved for networking 						*/
-
-enum {
-	NETLINK_UNCONNECTED = 0,
-	NETLINK_CONNECTED,
-};
-
-/*
- *  <------- NLA_HDRLEN ------> <-- NLA_ALIGN(payload)-->
- * +---------------------+- - -+- - - - - - - - - -+- - -+
- * |        Header       | Pad |     Payload       | Pad |
- * |   (struct nlattr)   | ing |                   | ing |
- * +---------------------+- - -+- - - - - - - - - -+- - -+
- *  <-------------- nlattr->nla_len -------------->
- */
-
-struct nlattr {
-	__u16           nla_len;
-	__u16           nla_type;
-};
-
-/*
- * nla_type (16 bits)
- * +---+---+-------------------------------+
- * | N | O | Attribute Type                |
- * +---+---+-------------------------------+
- * N := Carries nested attributes
- * O := Payload stored in network byte order
- *
- * Note: The N and O flag are mutually exclusive.
- */
-#define NLA_F_NESTED		(1 << 15)
-#define NLA_F_NET_BYTEORDER	(1 << 14)
-#define NLA_TYPE_MASK		~(NLA_F_NESTED | NLA_F_NET_BYTEORDER)
-
-#define NLA_ALIGNTO		4
-#define NLA_ALIGN(len)		(((len) + NLA_ALIGNTO - 1) & ~(NLA_ALIGNTO - 1))
-#define NLA_HDRLEN		((int) NLA_ALIGN(sizeof(struct nlattr)))
-
-#ifdef __KERNEL__
-
-#include <linux/capability.h>
-#include <linux/skbuff.h>
-
-struct net;
-
-static inline struct nlmsghdr *nlmsg_hdr(const struct sk_buff *skb)
-{
-	return (struct nlmsghdr *)skb->data;
-}
-
-struct netlink_skb_parms {
-	struct ucred		creds;		/* Skb credentials	*/
-	__u32			pid;
-	__u32			dst_group;
-};
-
-#define NETLINK_CB(skb)		(*(struct netlink_skb_parms*)&((skb)->cb))
-#define NETLINK_CREDS(skb)	(&NETLINK_CB((skb)).creds)
-
-
-extern void netlink_table_grab(void);
-extern void netlink_table_ungrab(void);
-
-extern struct sock *netlink_kernel_create(struct net *net,
-					  int unit,unsigned int groups,
-					  void (*input)(struct sk_buff *skb),
-					  struct mutex *cb_mutex,
-					  struct module *module);
-extern void netlink_kernel_release(struct sock *sk);
-extern int __netlink_change_ngroups(struct sock *sk, unsigned int groups);
-extern int netlink_change_ngroups(struct sock *sk, unsigned int groups);
-extern void __netlink_clear_multicast_users(struct sock *sk, unsigned int group);
-extern void netlink_clear_multicast_users(struct sock *sk, unsigned int group);
-extern void netlink_ack(struct sk_buff *in_skb, struct nlmsghdr *nlh, int err);
-extern int netlink_has_listeners(struct sock *sk, unsigned int group);
-extern int netlink_unicast(struct sock *ssk, struct sk_buff *skb, __u32 pid, int nonblock);
-extern int netlink_broadcast(struct sock *ssk, struct sk_buff *skb, __u32 pid,
-			     __u32 group, gfp_t allocation);
-extern int netlink_broadcast_filtered(struct sock *ssk, struct sk_buff *skb,
-	__u32 pid, __u32 group, gfp_t allocation,
-	int (*filter)(struct sock *dsk, struct sk_buff *skb, void *data),
-	void *filter_data);
-extern int netlink_set_err(struct sock *ssk, __u32 pid, __u32 group, int code);
-extern int netlink_register_notifier(struct notifier_block *nb);
-extern int netlink_unregister_notifier(struct notifier_block *nb);
-
-/* finegrained unicast helpers: */
-struct sock *netlink_getsockbyfilp(struct file *filp);
-int netlink_attachskb(struct sock *sk, struct sk_buff *skb,
-		      long *timeo, struct sock *ssk);
-void netlink_detachskb(struct sock *sk, struct sk_buff *skb);
-int netlink_sendskb(struct sock *sk, struct sk_buff *skb);
-
-/*
- *	skb should fit one page. This choice is good for headerless malloc.
- *	But we should limit to 8K so that userspace does not have to
- *	use enormous buffer sizes on recvmsg() calls just to avoid
- *	MSG_TRUNC when PAGE_SIZE is very large.
- */
-#if PAGE_SIZE < 8192UL
-#define NLMSG_GOODSIZE	SKB_WITH_OVERHEAD(PAGE_SIZE)
-#else
-#define NLMSG_GOODSIZE	SKB_WITH_OVERHEAD(8192UL)
-#endif
-
-#define NLMSG_DEFAULT_SIZE (NLMSG_GOODSIZE - NLMSG_HDRLEN)
-
-
-struct netlink_callback {
-	struct sk_buff		*skb;
-	const struct nlmsghdr	*nlh;
-	int			(*dump)(struct sk_buff * skb,
-					struct netlink_callback *cb);
-	int			(*done)(struct netlink_callback *cb);
-	void			*data;
-	u16			family;
-	u16			min_dump_alloc;
-	unsigned int		prev_seq, seq;
-	long			args[6];
-};
-
-struct netlink_notify {
-	struct net *net;
-	int pid;
-	int protocol;
-};
-
-struct nlmsghdr *
-__nlmsg_put(struct sk_buff *skb, u32 pid, u32 seq, int type, int len, int flags);
-
-#define NLMSG_NEW(skb, pid, seq, type, len, flags) \
-({	if (unlikely(skb_tailroom(skb) < (int)NLMSG_SPACE(len))) \
-		goto nlmsg_failure; \
-	__nlmsg_put(skb, pid, seq, type, len, flags); })
-
-#define NLMSG_PUT(skb, pid, seq, type, len) \
-	NLMSG_NEW(skb, pid, seq, type, len, 0)
-
-struct netlink_dump_control {
-	int (*dump)(struct sk_buff *skb, struct netlink_callback *);
-	int (*done)(struct netlink_callback*);
-	void *data;
-	u16 min_dump_alloc;
-};
-
-extern int netlink_dump_start(struct sock *ssk, struct sk_buff *skb,
-			      const struct nlmsghdr *nlh,
-			      struct netlink_dump_control *control);
-
-
-#define NL_NONROOT_RECV 0x1
-#define NL_NONROOT_SEND 0x2
-extern void netlink_set_nonroot(int protocol, unsigned flag);
-
-#endif /* __KERNEL__ */
-
-#endif	/* __LINUX_NETLINK_H */
diff --git a/ANDROID_3.4.5/include/linux/netpoll.h b/ANDROID_3.4.5/include/linux/netpoll.h
deleted file mode 100644
index 5dfa091c..00000000
--- a/ANDROID_3.4.5/include/linux/netpoll.h
+++ /dev/null
@@ -1,156 +0,0 @@
-/*
- * Common code for low-level network console, dump, and debugger code
- *
- * Derived from netconsole, kgdb-over-ethernet, and netdump patches
- */
-
-#ifndef _LINUX_NETPOLL_H
-#define _LINUX_NETPOLL_H
-
-#include <linux/netdevice.h>
-#include <linux/interrupt.h>
-#include <linux/rcupdate.h>
-#include <linux/list.h>
-
-struct netpoll {
-	struct net_device *dev;
-	char dev_name[IFNAMSIZ];
-	const char *name;
-	void (*rx_hook)(struct netpoll *, int, char *, int);
-
-	__be32 local_ip, remote_ip;
-	u16 local_port, remote_port;
-	u8 remote_mac[ETH_ALEN];
-
-	struct list_head rx; /* rx_np list element */
-};
-
-struct netpoll_info {
-	atomic_t refcnt;
-
-	int rx_flags;
-	spinlock_t rx_lock;
-	struct list_head rx_np; /* netpolls that registered an rx_hook */
-
-	struct sk_buff_head arp_tx; /* list of arp requests to reply to */
-	struct sk_buff_head txq;
-
-	struct delayed_work tx_work;
-
-	struct netpoll *netpoll;
-};
-
-void netpoll_send_udp(struct netpoll *np, const char *msg, int len);
-void netpoll_print_options(struct netpoll *np);
-int netpoll_parse_options(struct netpoll *np, char *opt);
-int __netpoll_setup(struct netpoll *np);
-int netpoll_setup(struct netpoll *np);
-int netpoll_trap(void);
-void netpoll_set_trap(int trap);
-void __netpoll_cleanup(struct netpoll *np);
-void netpoll_cleanup(struct netpoll *np);
-int __netpoll_rx(struct sk_buff *skb);
-void netpoll_send_skb_on_dev(struct netpoll *np, struct sk_buff *skb,
-			     struct net_device *dev);
-static inline void netpoll_send_skb(struct netpoll *np, struct sk_buff *skb)
-{
-	netpoll_send_skb_on_dev(np, skb, np->dev);
-}
-
-
-
-#ifdef CONFIG_NETPOLL
-static inline bool netpoll_rx(struct sk_buff *skb)
-{
-	struct netpoll_info *npinfo;
-	unsigned long flags;
-	bool ret = false;
-
-	local_irq_save(flags);
-	npinfo = rcu_dereference_bh(skb->dev->npinfo);
-
-	if (!npinfo || (list_empty(&npinfo->rx_np) && !npinfo->rx_flags))
-		goto out;
-
-	spin_lock(&npinfo->rx_lock);
-	/* check rx_flags again with the lock held */
-	if (npinfo->rx_flags && __netpoll_rx(skb))
-		ret = true;
-	spin_unlock(&npinfo->rx_lock);
-
-out:
-	local_irq_restore(flags);
-	return ret;
-}
-
-static inline int netpoll_rx_on(struct sk_buff *skb)
-{
-	struct netpoll_info *npinfo = rcu_dereference_bh(skb->dev->npinfo);
-
-	return npinfo && (!list_empty(&npinfo->rx_np) || npinfo->rx_flags);
-}
-
-static inline int netpoll_receive_skb(struct sk_buff *skb)
-{
-	if (!list_empty(&skb->dev->napi_list))
-		return netpoll_rx(skb);
-	return 0;
-}
-
-static inline void *netpoll_poll_lock(struct napi_struct *napi)
-{
-	struct net_device *dev = napi->dev;
-
-	if (dev && dev->npinfo) {
-		spin_lock(&napi->poll_lock);
-		napi->poll_owner = smp_processor_id();
-		return napi;
-	}
-	return NULL;
-}
-
-static inline void netpoll_poll_unlock(void *have)
-{
-	struct napi_struct *napi = have;
-
-	if (napi) {
-		napi->poll_owner = -1;
-		spin_unlock(&napi->poll_lock);
-	}
-}
-
-static inline int netpoll_tx_running(struct net_device *dev)
-{
-	return irqs_disabled();
-}
-
-#else
-static inline bool netpoll_rx(struct sk_buff *skb)
-{
-	return 0;
-}
-static inline int netpoll_rx_on(struct sk_buff *skb)
-{
-	return 0;
-}
-static inline int netpoll_receive_skb(struct sk_buff *skb)
-{
-	return 0;
-}
-static inline void *netpoll_poll_lock(struct napi_struct *napi)
-{
-	return NULL;
-}
-static inline void netpoll_poll_unlock(void *have)
-{
-}
-static inline void netpoll_netdev_init(struct net_device *dev)
-{
-}
-static inline int netpoll_tx_running(struct net_device *dev)
-{
-	return 0;
-}
-#endif
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/netrom.h b/ANDROID_3.4.5/include/linux/netrom.h
deleted file mode 100644
index af7313cc..00000000
--- a/ANDROID_3.4.5/include/linux/netrom.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * These are the public elements of the Linux kernel NET/ROM implementation.
- * For kernel AX.25 see the file ax25.h. This file requires ax25.h for the
- * definition of the ax25_address structure.
- */
-
-#ifndef	NETROM_KERNEL_H
-#define	NETROM_KERNEL_H
-
-#include <linux/ax25.h>
-
-#define NETROM_MTU	236
-
-#define NETROM_T1	1
-#define NETROM_T2	2
-#define NETROM_N2	3
-#define	NETROM_T4	6
-#define	NETROM_IDLE	7
-
-#define	SIOCNRDECOBS		(SIOCPROTOPRIVATE+2)
-
-struct nr_route_struct {
-#define	NETROM_NEIGH	0
-#define	NETROM_NODE	1
-	int		type;
-	ax25_address	callsign;
-	char		device[16];
-	unsigned int	quality;
-	char		mnemonic[7];
-	ax25_address	neighbour;
-	unsigned int	obs_count;
-	unsigned int	ndigis;
-	ax25_address	digipeaters[AX25_MAX_DIGIS];
-};
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/nfc.h b/ANDROID_3.4.5/include/linux/nfc.h
deleted file mode 100644
index 39c1fcf0..00000000
--- a/ANDROID_3.4.5/include/linux/nfc.h
+++ /dev/null
@@ -1,171 +0,0 @@
-/*
- * Copyright (C) 2011 Instituto Nokia de Tecnologia
- *
- * Authors:
- *    Lauro Ramos Venancio <lauro.venancio@openbossa.org>
- *    Aloisio Almeida Jr <aloisio.almeida@openbossa.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the
- * Free Software Foundation, Inc.,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- */
-
-#ifndef __LINUX_NFC_H
-#define __LINUX_NFC_H
-
-#include <linux/types.h>
-#include <linux/socket.h>
-
-#define NFC_GENL_NAME "nfc"
-#define NFC_GENL_VERSION 1
-
-#define NFC_GENL_MCAST_EVENT_NAME "events"
-
-/**
- * enum nfc_commands - supported nfc commands
- *
- * @NFC_CMD_UNSPEC: unspecified command
- *
- * @NFC_CMD_GET_DEVICE: request information about a device (requires
- *	%NFC_ATTR_DEVICE_INDEX) or dump request to get a list of all nfc devices
- * @NFC_CMD_DEV_UP: turn on the nfc device
- *	(requires %NFC_ATTR_DEVICE_INDEX)
- * @NFC_CMD_DEV_DOWN: turn off the nfc device
- *	(requires %NFC_ATTR_DEVICE_INDEX)
- * @NFC_CMD_START_POLL: start polling for targets using the given protocols
- *	(requires %NFC_ATTR_DEVICE_INDEX and %NFC_ATTR_PROTOCOLS)
- * @NFC_CMD_STOP_POLL: stop polling for targets (requires
- *	%NFC_ATTR_DEVICE_INDEX)
- * @NFC_CMD_GET_TARGET: dump all targets found by the previous poll (requires
- *	%NFC_ATTR_DEVICE_INDEX)
- * @NFC_EVENT_TARGETS_FOUND: event emitted when a new target is found
- *	(it sends %NFC_ATTR_DEVICE_INDEX)
- * @NFC_EVENT_DEVICE_ADDED: event emitted when a new device is registred
- *	(it sends %NFC_ATTR_DEVICE_NAME, %NFC_ATTR_DEVICE_INDEX and
- *	%NFC_ATTR_PROTOCOLS)
- * @NFC_EVENT_DEVICE_REMOVED: event emitted when a device is removed
- *	(it sends %NFC_ATTR_DEVICE_INDEX)
- */
-enum nfc_commands {
-	NFC_CMD_UNSPEC,
-	NFC_CMD_GET_DEVICE,
-	NFC_CMD_DEV_UP,
-	NFC_CMD_DEV_DOWN,
-	NFC_CMD_DEP_LINK_UP,
-	NFC_CMD_DEP_LINK_DOWN,
-	NFC_CMD_START_POLL,
-	NFC_CMD_STOP_POLL,
-	NFC_CMD_GET_TARGET,
-	NFC_EVENT_TARGETS_FOUND,
-	NFC_EVENT_DEVICE_ADDED,
-	NFC_EVENT_DEVICE_REMOVED,
-/* private: internal use only */
-	__NFC_CMD_AFTER_LAST
-};
-#define NFC_CMD_MAX (__NFC_CMD_AFTER_LAST - 1)
-
-/**
- * enum nfc_attrs - supported nfc attributes
- *
- * @NFC_ATTR_UNSPEC: unspecified attribute
- *
- * @NFC_ATTR_DEVICE_INDEX: index of nfc device
- * @NFC_ATTR_DEVICE_NAME: device name, max 8 chars
- * @NFC_ATTR_PROTOCOLS: nfc protocols - bitwise or-ed combination from
- *	NFC_PROTO_*_MASK constants
- * @NFC_ATTR_TARGET_INDEX: index of the nfc target
- * @NFC_ATTR_TARGET_SENS_RES: NFC-A targets extra information such as NFCID
- * @NFC_ATTR_TARGET_SEL_RES: NFC-A targets extra information (useful if the
- *	target is not NFC-Forum compliant)
- * @NFC_ATTR_TARGET_NFCID1: NFC-A targets identifier, max 10 bytes
- * @NFC_ATTR_TARGET_SENSB_RES: NFC-B targets extra information, max 12 bytes
- * @NFC_ATTR_TARGET_SENSF_RES: NFC-F targets extra information, max 18 bytes
- * @NFC_ATTR_COMM_MODE: Passive or active mode
- * @NFC_ATTR_RF_MODE: Initiator or target
- */
-enum nfc_attrs {
-	NFC_ATTR_UNSPEC,
-	NFC_ATTR_DEVICE_INDEX,
-	NFC_ATTR_DEVICE_NAME,
-	NFC_ATTR_PROTOCOLS,
-	NFC_ATTR_TARGET_INDEX,
-	NFC_ATTR_TARGET_SENS_RES,
-	NFC_ATTR_TARGET_SEL_RES,
-	NFC_ATTR_TARGET_NFCID1,
-	NFC_ATTR_TARGET_SENSB_RES,
-	NFC_ATTR_TARGET_SENSF_RES,
-	NFC_ATTR_COMM_MODE,
-	NFC_ATTR_RF_MODE,
-	NFC_ATTR_DEVICE_POWERED,
-/* private: internal use only */
-	__NFC_ATTR_AFTER_LAST
-};
-#define NFC_ATTR_MAX (__NFC_ATTR_AFTER_LAST - 1)
-
-#define NFC_DEVICE_NAME_MAXSIZE 8
-#define NFC_NFCID1_MAXSIZE 10
-#define NFC_SENSB_RES_MAXSIZE 12
-#define NFC_SENSF_RES_MAXSIZE 18
-
-/* NFC protocols */
-#define NFC_PROTO_JEWEL		1
-#define NFC_PROTO_MIFARE	2
-#define NFC_PROTO_FELICA	3
-#define NFC_PROTO_ISO14443	4
-#define NFC_PROTO_NFC_DEP	5
-
-#define NFC_PROTO_MAX		6
-
-/* NFC communication modes */
-#define NFC_COMM_ACTIVE  0
-#define NFC_COMM_PASSIVE 1
-
-/* NFC RF modes */
-#define NFC_RF_INITIATOR 0
-#define NFC_RF_TARGET    1
-
-/* NFC protocols masks used in bitsets */
-#define NFC_PROTO_JEWEL_MASK	(1 << NFC_PROTO_JEWEL)
-#define NFC_PROTO_MIFARE_MASK	(1 << NFC_PROTO_MIFARE)
-#define NFC_PROTO_FELICA_MASK	(1 << NFC_PROTO_FELICA)
-#define NFC_PROTO_ISO14443_MASK	(1 << NFC_PROTO_ISO14443)
-#define NFC_PROTO_NFC_DEP_MASK	(1 << NFC_PROTO_NFC_DEP)
-
-struct sockaddr_nfc {
-	sa_family_t sa_family;
-	__u32 dev_idx;
-	__u32 target_idx;
-	__u32 nfc_protocol;
-};
-
-#define NFC_LLCP_MAX_SERVICE_NAME 63
-struct sockaddr_nfc_llcp {
-	sa_family_t sa_family;
-	__u32 dev_idx;
-	__u32 target_idx;
-	__u32 nfc_protocol;
-	__u8 dsap; /* Destination SAP, if known */
-	__u8 ssap; /* Source SAP to be bound to */
-	char service_name[NFC_LLCP_MAX_SERVICE_NAME]; /* Service name URI */;
-	size_t service_name_len;
-};
-
-/* NFC socket protocols */
-#define NFC_SOCKPROTO_RAW	0
-#define NFC_SOCKPROTO_LLCP	1
-#define NFC_SOCKPROTO_MAX	2
-
-#define NFC_HEADER_SIZE 1
-
-#endif /*__LINUX_NFC_H */
diff --git a/ANDROID_3.4.5/include/linux/nfc/bcm2079x.h b/ANDROID_3.4.5/include/linux/nfc/bcm2079x.h
deleted file mode 100644
index 689757aa..00000000
--- a/ANDROID_3.4.5/include/linux/nfc/bcm2079x.h
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- * Copyright (C) 2012 Broadcom Corporation.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef _BCM2079X_H
-#define _BCM2079X_H
-
-#define BCMNFC_MAGIC	0xFA
-
-/*
- * BCMNFC power control via ioctl
- * BCMNFC_POWER_CTL(0): power off
- * BCMNFC_POWER_CTL(1): power on
- * BCMNFC_WAKE_CTL(0): wake off
- * BCMNFC_WAKE_CTL(1): wake on
- */
-#define BCMNFC_POWER_CTL		_IO(BCMNFC_MAGIC, 0x01)
-#define BCMNFC_CHANGE_ADDR		_IO(BCMNFC_MAGIC, 0x02)
-#define BCMNFC_READ_FULL_PACKET		_IO(BCMNFC_MAGIC, 0x03)
-#define BCMNFC_SET_WAKE_ACTIVE_STATE	_IO(BCMNFC_MAGIC, 0x04)
-#define BCMNFC_WAKE_CTL			_IO(BCMNFC_MAGIC, 0x05)
-#define BCMNFC_READ_MULTI_PACKETS	_IO(BCMNFC_MAGIC, 0x06)
-
-struct bcm2079x_platform_data {
-	unsigned int irq_gpio;
-	unsigned int irq_no;
-	unsigned int en_gpio;
-	int wake_gpio;
-};
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/nfc/pn544.h b/ANDROID_3.4.5/include/linux/nfc/pn544.h
deleted file mode 100644
index 11eb2236..00000000
--- a/ANDROID_3.4.5/include/linux/nfc/pn544.h
+++ /dev/null
@@ -1,114 +0,0 @@
-/*
- * Driver include for the PN544 NFC chip.
- *
- * Copyright (C) Nokia Corporation
- *
- * Author: Jari Vanhala <ext-jari.vanhala@nokia.com>
- * Contact: Matti Aaltoenn <matti.j.aaltonen@nokia.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#ifndef _PN544_H_
-#define _PN544_H_
-
-#include <linux/i2c.h>
-
-#define PN544_DRIVER_NAME	"pn544"
-#define PN544_MAXWINDOW_SIZE	7
-#define PN544_WINDOW_SIZE	4
-#define PN544_RETRIES		10
-#define PN544_MAX_I2C_TRANSFER	0x0400
-#define PN544_MSG_MAX_SIZE	0x21 /* at normal HCI mode */
-
-
-#define PN544_MAGIC	0xE9
-
-/*
- * PN544 power control via ioctl
- * PN544_SET_PWR(0): power off
- * PN544_SET_PWR(1): power on
- * PN544_SET_PWR(2): reset and power on with firmware download enabled
- */
-#define PN544_SET_PWR	_IOW(PN544_MAGIC, 0x01, unsigned int)
-
-
-/* ioctl */
-#define PN544_CHAR_BASE		'P'
-#define PN544_IOR(num, dtype)	_IOR(PN544_CHAR_BASE, num, dtype)
-#define PN544_IOW(num, dtype)	_IOW(PN544_CHAR_BASE, num, dtype)
-#define PN544_GET_FW_MODE	PN544_IOW(1, unsigned int)
-#define PN544_SET_FW_MODE	PN544_IOW(2, unsigned int)
-#define PN544_GET_DEBUG		PN544_IOW(3, unsigned int)
-#define PN544_SET_DEBUG		PN544_IOW(4, unsigned int)
-
-//#define PN544_SET_PWR		PN544_IOW(5, unsigned int) //add 2014-7-10
-/* Timing restrictions (ms) */
-#define PN544_RESETVEN_TIME	30 /* 7 */
-#define PN544_PVDDVEN_TIME	0
-#define PN544_VBATVEN_TIME	0
-#define PN544_GPIO4VEN_TIME	0
-#define PN544_WAKEUP_ACK	5
-#define PN544_WAKEUP_GUARD	(PN544_WAKEUP_ACK + 1)
-#define PN544_INACTIVITY_TIME	1000
-#define PN544_INTERFRAME_DELAY	200 /* us */
-#define PN544_BAUDRATE_CHANGE	150 /* us */
-
-/* Debug bits */
-#define PN544_DEBUG_BUF		0x01
-#define PN544_DEBUG_READ	0x02
-#define PN544_DEBUG_WRITE	0x04
-#define PN544_DEBUG_IRQ		0x08
-#define PN544_DEBUG_CALLS	0x10
-#define PN544_DEBUG_MODE	0x20
-
-/* Normal (HCI) mode */
-#define PN544_LLC_HCI_OVERHEAD	3 /* header + crc (to length) */
-#define PN544_LLC_MIN_SIZE	(1 + PN544_LLC_HCI_OVERHEAD) /* length + */
-#define PN544_LLC_MAX_DATA	(PN544_MSG_MAX_SIZE - 2)
-#define PN544_LLC_MAX_HCI_SIZE	(PN544_LLC_MAX_DATA - 2)
-
-struct pn544_llc_packet {
-	unsigned char length; /* of rest of packet */
-	unsigned char header;
-	unsigned char data[PN544_LLC_MAX_DATA]; /* includes crc-ccitt */
-};
-
-/* Firmware upgrade mode */
-#define PN544_FW_HEADER_SIZE	3
-/* max fw transfer is 1024bytes, but I2C limits it to 0xC0 */
-#define PN544_MAX_FW_DATA	(PN544_MAX_I2C_TRANSFER - PN544_FW_HEADER_SIZE)
-
-struct pn544_fw_packet {
-	unsigned char command; /* status in answer */
-	unsigned char length[2]; /* big-endian order (msf) */
-	unsigned char data[PN544_MAX_FW_DATA];
-};
-
-#ifdef __KERNEL__
-/* board config */
-struct pn544_nfc_platform_data {
-	int (*request_resources) (struct i2c_client *client);
-	void (*free_resources) (void);
-	void (*enable) (int fw);
-	int (*test) (void);
-	void (*disable) (void);
-	int irq_gpio, ven_gpio, firm_gpio;
-	//int irq_enable, ven_enable, firm_enable;
-	int irq_active, ven_active, firm_active;
-	
-};
-#endif /* __KERNEL__ */
-
-#endif /* _PN544_H_ */
diff --git a/ANDROID_3.4.5/include/linux/nfs.h b/ANDROID_3.4.5/include/linux/nfs.h
deleted file mode 100644
index 6d1fb63f..00000000
--- a/ANDROID_3.4.5/include/linux/nfs.h
+++ /dev/null
@@ -1,173 +0,0 @@
-/*
- * NFS protocol definitions
- *
- * This file contains constants mostly for Version 2 of the protocol,
- * but also has a couple of NFSv3 bits in (notably the error codes).
- */
-#ifndef _LINUX_NFS_H
-#define _LINUX_NFS_H
-
-#define NFS_PROGRAM	100003
-#define NFS_PORT	2049
-#define NFS_MAXDATA	8192
-#define NFS_MAXPATHLEN	1024
-#define NFS_MAXNAMLEN	255
-#define NFS_MAXGROUPS	16
-#define NFS_FHSIZE	32
-#define NFS_COOKIESIZE	4
-#define NFS_FIFO_DEV	(-1)
-#define NFSMODE_FMT	0170000
-#define NFSMODE_DIR	0040000
-#define NFSMODE_CHR	0020000
-#define NFSMODE_BLK	0060000
-#define NFSMODE_REG	0100000
-#define NFSMODE_LNK	0120000
-#define NFSMODE_SOCK	0140000
-#define NFSMODE_FIFO	0010000
-
-#define NFS_MNT_PROGRAM		100005
-#define NFS_MNT_VERSION		1
-#define NFS_MNT3_VERSION	3
-
-#define NFS_PIPE_DIRNAME "nfs"
-
-/*
- * NFS stats. The good thing with these values is that NFSv3 errors are
- * a superset of NFSv2 errors (with the exception of NFSERR_WFLUSH which
- * no-one uses anyway), so we can happily mix code as long as we make sure
- * no NFSv3 errors are returned to NFSv2 clients.
- * Error codes that have a `--' in the v2 column are not part of the
- * standard, but seem to be widely used nevertheless.
- */
- enum nfs_stat {
-	NFS_OK = 0,			/* v2 v3 v4 */
-	NFSERR_PERM = 1,		/* v2 v3 v4 */
-	NFSERR_NOENT = 2,		/* v2 v3 v4 */
-	NFSERR_IO = 5,			/* v2 v3 v4 */
-	NFSERR_NXIO = 6,		/* v2 v3 v4 */
-	NFSERR_EAGAIN = 11,		/* v2 v3 */
-	NFSERR_ACCES = 13,		/* v2 v3 v4 */
-	NFSERR_EXIST = 17,		/* v2 v3 v4 */
-	NFSERR_XDEV = 18,		/*    v3 v4 */
-	NFSERR_NODEV = 19,		/* v2 v3 v4 */
-	NFSERR_NOTDIR = 20,		/* v2 v3 v4 */
-	NFSERR_ISDIR = 21,		/* v2 v3 v4 */
-	NFSERR_INVAL = 22,		/* v2 v3 v4 */
-	NFSERR_FBIG = 27,		/* v2 v3 v4 */
-	NFSERR_NOSPC = 28,		/* v2 v3 v4 */
-	NFSERR_ROFS = 30,		/* v2 v3 v4 */
-	NFSERR_MLINK = 31,		/*    v3 v4 */
-	NFSERR_OPNOTSUPP = 45,		/* v2 v3 */
-	NFSERR_NAMETOOLONG = 63,	/* v2 v3 v4 */
-	NFSERR_NOTEMPTY = 66,		/* v2 v3 v4 */
-	NFSERR_DQUOT = 69,		/* v2 v3 v4 */
-	NFSERR_STALE = 70,		/* v2 v3 v4 */
-	NFSERR_REMOTE = 71,		/* v2 v3 */
-	NFSERR_WFLUSH = 99,		/* v2    */
-	NFSERR_BADHANDLE = 10001,	/*    v3 v4 */
-	NFSERR_NOT_SYNC = 10002,	/*    v3 */
-	NFSERR_BAD_COOKIE = 10003,	/*    v3 v4 */
-	NFSERR_NOTSUPP = 10004,		/*    v3 v4 */
-	NFSERR_TOOSMALL = 10005,	/*    v3 v4 */
-	NFSERR_SERVERFAULT = 10006,	/*    v3 v4 */
-	NFSERR_BADTYPE = 10007,		/*    v3 v4 */
-	NFSERR_JUKEBOX = 10008,		/*    v3 v4 */
-	NFSERR_SAME = 10009,		/*       v4 */
-	NFSERR_DENIED = 10010,		/*       v4 */
-	NFSERR_EXPIRED = 10011,		/*       v4 */
-	NFSERR_LOCKED = 10012,		/*       v4 */
-	NFSERR_GRACE = 10013,		/*       v4 */
-	NFSERR_FHEXPIRED = 10014,	/*       v4 */
-	NFSERR_SHARE_DENIED = 10015,	/*       v4 */
-	NFSERR_WRONGSEC = 10016,	/*       v4 */
-	NFSERR_CLID_INUSE = 10017,	/*       v4 */
-	NFSERR_RESOURCE = 10018,	/*       v4 */
-	NFSERR_MOVED = 10019,		/*       v4 */
-	NFSERR_NOFILEHANDLE = 10020,	/*       v4 */
-	NFSERR_MINOR_VERS_MISMATCH = 10021,   /* v4 */
-	NFSERR_STALE_CLIENTID = 10022,	/*       v4 */
-	NFSERR_STALE_STATEID = 10023,   /*       v4 */
-	NFSERR_OLD_STATEID = 10024,     /*       v4 */
-	NFSERR_BAD_STATEID = 10025,     /*       v4 */  
-	NFSERR_BAD_SEQID = 10026,	/*       v4 */
-	NFSERR_NOT_SAME = 10027,	/*       v4 */
-	NFSERR_LOCK_RANGE = 10028,	/*       v4 */
-	NFSERR_SYMLINK = 10029,		/*       v4 */
-	NFSERR_RESTOREFH = 10030,	/*       v4 */
-	NFSERR_LEASE_MOVED = 10031,	/*       v4 */
-	NFSERR_ATTRNOTSUPP = 10032,	/*       v4 */
-	NFSERR_NO_GRACE = 10033,	/*       v4 */
-	NFSERR_RECLAIM_BAD = 10034,	/*       v4 */
-	NFSERR_RECLAIM_CONFLICT = 10035,/*       v4 */
-	NFSERR_BAD_XDR = 10036,		/*       v4 */
-	NFSERR_LOCKS_HELD = 10037,	/*       v4 */
-	NFSERR_OPENMODE = 10038,       /*       v4 */
-	NFSERR_BADOWNER = 10039,       /*       v4 */
-	NFSERR_BADCHAR = 10040,        /*       v4 */
-	NFSERR_BADNAME = 10041,        /*       v4 */
-	NFSERR_BAD_RANGE = 10042,      /*       v4 */
-	NFSERR_LOCK_NOTSUPP = 10043,   /*       v4 */
-	NFSERR_OP_ILLEGAL = 10044,     /*       v4 */
-	NFSERR_DEADLOCK = 10045,       /*       v4 */
-	NFSERR_FILE_OPEN = 10046,      /*       v4 */
-	NFSERR_ADMIN_REVOKED = 10047,  /*       v4 */
-	NFSERR_CB_PATH_DOWN = 10048,   /*       v4 */
-};
-
-/* NFSv2 file types - beware, these are not the same in NFSv3 */
-
-enum nfs_ftype {
-	NFNON = 0,
-	NFREG = 1,
-	NFDIR = 2,
-	NFBLK = 3,
-	NFCHR = 4,
-	NFLNK = 5,
-	NFSOCK = 6,
-	NFBAD = 7,
-	NFFIFO = 8
-};
-
-#ifdef __KERNEL__
-#include <linux/sunrpc/msg_prot.h>
-#include <linux/string.h>
-
-/*
- * This is the kernel NFS client file handle representation
- */
-#define NFS_MAXFHSIZE		128
-struct nfs_fh {
-	unsigned short		size;
-	unsigned char		data[NFS_MAXFHSIZE];
-};
-
-/*
- * Returns a zero iff the size and data fields match.
- * Checks only "size" bytes in the data field.
- */
-static inline int nfs_compare_fh(const struct nfs_fh *a, const struct nfs_fh *b)
-{
-	return a->size != b->size || memcmp(a->data, b->data, a->size) != 0;
-}
-
-static inline void nfs_copy_fh(struct nfs_fh *target, const struct nfs_fh *source)
-{
-	target->size = source->size;
-	memcpy(target->data, source->data, source->size);
-}
-
-
-/*
- * This is really a general kernel constant, but since nothing like
- * this is defined in the kernel headers, I have to do it here.
- */
-#define NFS_OFFSET_MAX		((__s64)((~(__u64)0) >> 1))
-
-
-enum nfs3_stable_how {
-	NFS_UNSTABLE = 0,
-	NFS_DATA_SYNC = 1,
-	NFS_FILE_SYNC = 2
-};
-#endif /* __KERNEL__ */
-#endif /* _LINUX_NFS_H */
diff --git a/ANDROID_3.4.5/include/linux/nfs2.h b/ANDROID_3.4.5/include/linux/nfs2.h
deleted file mode 100644
index fde24b30..00000000
--- a/ANDROID_3.4.5/include/linux/nfs2.h
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
- * NFS protocol definitions
- *
- * This file contains constants for Version 2 of the protocol.
- */
-#ifndef _LINUX_NFS2_H
-#define _LINUX_NFS2_H
-
-#define NFS2_PORT	2049
-#define NFS2_MAXDATA	8192
-#define NFS2_MAXPATHLEN	1024
-#define NFS2_MAXNAMLEN	255
-#define NFS2_MAXGROUPS	16
-#define NFS2_FHSIZE	32
-#define NFS2_COOKIESIZE	4
-#define NFS2_FIFO_DEV	(-1)
-#define NFS2MODE_FMT	0170000
-#define NFS2MODE_DIR	0040000
-#define NFS2MODE_CHR	0020000
-#define NFS2MODE_BLK	0060000
-#define NFS2MODE_REG	0100000
-#define NFS2MODE_LNK	0120000
-#define NFS2MODE_SOCK	0140000
-#define NFS2MODE_FIFO	0010000
-
-
-/* NFSv2 file types - beware, these are not the same in NFSv3 */
-enum nfs2_ftype {
-	NF2NON = 0,
-	NF2REG = 1,
-	NF2DIR = 2,
-	NF2BLK = 3,
-	NF2CHR = 4,
-	NF2LNK = 5,
-	NF2SOCK = 6,
-	NF2BAD = 7,
-	NF2FIFO = 8
-};
-
-struct nfs2_fh {
-	char			data[NFS2_FHSIZE];
-};
-
-/*
- * Procedure numbers for NFSv2
- */
-#define NFS2_VERSION		2
-#define NFSPROC_NULL		0
-#define NFSPROC_GETATTR		1
-#define NFSPROC_SETATTR		2
-#define NFSPROC_ROOT		3
-#define NFSPROC_LOOKUP		4
-#define NFSPROC_READLINK	5
-#define NFSPROC_READ		6
-#define NFSPROC_WRITECACHE	7
-#define NFSPROC_WRITE		8
-#define NFSPROC_CREATE		9
-#define NFSPROC_REMOVE		10
-#define NFSPROC_RENAME		11
-#define NFSPROC_LINK		12
-#define NFSPROC_SYMLINK		13
-#define NFSPROC_MKDIR		14
-#define NFSPROC_RMDIR		15
-#define NFSPROC_READDIR		16
-#define NFSPROC_STATFS		17
-
-#endif /* _LINUX_NFS2_H */
diff --git a/ANDROID_3.4.5/include/linux/nfs3.h b/ANDROID_3.4.5/include/linux/nfs3.h
deleted file mode 100644
index 6ccfe3b6..00000000
--- a/ANDROID_3.4.5/include/linux/nfs3.h
+++ /dev/null
@@ -1,103 +0,0 @@
-/*
- * NFSv3 protocol definitions
- */
-#ifndef _LINUX_NFS3_H
-#define _LINUX_NFS3_H
-
-#define NFS3_PORT		2049
-#define NFS3_MAXDATA		32768
-#define NFS3_MAXPATHLEN		PATH_MAX
-#define NFS3_MAXNAMLEN		NAME_MAX
-#define NFS3_MAXGROUPS		16
-#define NFS3_FHSIZE		64
-#define NFS3_COOKIESIZE		4
-#define NFS3_CREATEVERFSIZE	8
-#define NFS3_COOKIEVERFSIZE	8
-#define NFS3_WRITEVERFSIZE	8
-#define NFS3_FIFO_DEV		(-1)
-#define NFS3MODE_FMT		0170000
-#define NFS3MODE_DIR		0040000
-#define NFS3MODE_CHR		0020000
-#define NFS3MODE_BLK		0060000
-#define NFS3MODE_REG		0100000
-#define NFS3MODE_LNK		0120000
-#define NFS3MODE_SOCK		0140000
-#define NFS3MODE_FIFO		0010000
-
-/* Flags for access() call */
-#define NFS3_ACCESS_READ	0x0001
-#define NFS3_ACCESS_LOOKUP	0x0002
-#define NFS3_ACCESS_MODIFY	0x0004
-#define NFS3_ACCESS_EXTEND	0x0008
-#define NFS3_ACCESS_DELETE	0x0010
-#define NFS3_ACCESS_EXECUTE	0x0020
-#define NFS3_ACCESS_FULL	0x003f
-
-/* Flags for create mode */
-enum nfs3_createmode {
-	NFS3_CREATE_UNCHECKED = 0,
-	NFS3_CREATE_GUARDED = 1,
-	NFS3_CREATE_EXCLUSIVE = 2
-};
-
-/* NFSv3 file system properties */
-#define NFS3_FSF_LINK		0x0001
-#define NFS3_FSF_SYMLINK	0x0002
-#define NFS3_FSF_HOMOGENEOUS	0x0008
-#define NFS3_FSF_CANSETTIME	0x0010
-/* Some shorthands. See fs/nfsd/nfs3proc.c */
-#define NFS3_FSF_DEFAULT	0x001B
-#define NFS3_FSF_BILLYBOY	0x0018
-#define NFS3_FSF_READONLY	0x0008
-
-enum nfs3_ftype {
-	NF3NON  = 0,
-	NF3REG  = 1,
-	NF3DIR  = 2,
-	NF3BLK  = 3,
-	NF3CHR  = 4,
-	NF3LNK  = 5,
-	NF3SOCK = 6,
-	NF3FIFO = 7,	/* changed from NFSv2 (was 8) */
-	NF3BAD  = 8
-};
-
-struct nfs3_fh {
-	unsigned short size;
-	unsigned char  data[NFS3_FHSIZE];
-};
-
-#define NFS3_VERSION		3
-#define NFS3PROC_NULL		0
-#define NFS3PROC_GETATTR	1
-#define NFS3PROC_SETATTR	2
-#define NFS3PROC_LOOKUP		3
-#define NFS3PROC_ACCESS		4
-#define NFS3PROC_READLINK	5
-#define NFS3PROC_READ		6
-#define NFS3PROC_WRITE		7
-#define NFS3PROC_CREATE		8
-#define NFS3PROC_MKDIR		9
-#define NFS3PROC_SYMLINK	10
-#define NFS3PROC_MKNOD		11
-#define NFS3PROC_REMOVE		12
-#define NFS3PROC_RMDIR		13
-#define NFS3PROC_RENAME		14
-#define NFS3PROC_LINK		15
-#define NFS3PROC_READDIR	16
-#define NFS3PROC_READDIRPLUS	17
-#define NFS3PROC_FSSTAT		18
-#define NFS3PROC_FSINFO		19
-#define NFS3PROC_PATHCONF	20
-#define NFS3PROC_COMMIT		21
-
-#define NFS_MNT3_VERSION	3
- 
-
-#if defined(__KERNEL__)
-
-/* Number of 32bit words in post_op_attr */
-#define NFS3_POST_OP_ATTR_WORDS		22
-
-#endif /* __KERNEL__ */
-#endif /* _LINUX_NFS3_H */
diff --git a/ANDROID_3.4.5/include/linux/nfs4.h b/ANDROID_3.4.5/include/linux/nfs4.h
deleted file mode 100644
index 0987146b..00000000
--- a/ANDROID_3.4.5/include/linux/nfs4.h
+++ /dev/null
@@ -1,669 +0,0 @@
-/*
- *  include/linux/nfs4.h
- *
- *  NFSv4 protocol definitions.
- *
- *  Copyright (c) 2002 The Regents of the University of Michigan.
- *  All rights reserved.
- *
- *  Kendrick Smith <kmsmith@umich.edu>
- *  Andy Adamson   <andros@umich.edu>
- */
-
-#ifndef _LINUX_NFS4_H
-#define _LINUX_NFS4_H
-
-#include <linux/types.h>
-
-#define NFS4_BITMAP_SIZE	2
-#define NFS4_VERIFIER_SIZE	8
-#define NFS4_STATEID_SEQID_SIZE 4
-#define NFS4_STATEID_OTHER_SIZE 12
-#define NFS4_STATEID_SIZE	(NFS4_STATEID_SEQID_SIZE + NFS4_STATEID_OTHER_SIZE)
-#define NFS4_FHSIZE		128
-#define NFS4_MAXPATHLEN		PATH_MAX
-#define NFS4_MAXNAMLEN		NAME_MAX
-#define NFS4_OPAQUE_LIMIT	1024
-#define NFS4_MAX_SESSIONID_LEN	16
-
-#define NFS4_ACCESS_READ        0x0001
-#define NFS4_ACCESS_LOOKUP      0x0002
-#define NFS4_ACCESS_MODIFY      0x0004
-#define NFS4_ACCESS_EXTEND      0x0008
-#define NFS4_ACCESS_DELETE      0x0010
-#define NFS4_ACCESS_EXECUTE     0x0020
-
-#define NFS4_FH_PERSISTENT		0x0000
-#define NFS4_FH_NOEXPIRE_WITH_OPEN	0x0001
-#define NFS4_FH_VOLATILE_ANY		0x0002
-#define NFS4_FH_VOL_MIGRATION		0x0004
-#define NFS4_FH_VOL_RENAME		0x0008
-
-#define NFS4_OPEN_RESULT_CONFIRM 0x0002
-#define NFS4_OPEN_RESULT_LOCKTYPE_POSIX 0x0004
-
-#define NFS4_SHARE_ACCESS_MASK	0x000F
-#define NFS4_SHARE_ACCESS_READ	0x0001
-#define NFS4_SHARE_ACCESS_WRITE	0x0002
-#define NFS4_SHARE_ACCESS_BOTH	0x0003
-#define NFS4_SHARE_DENY_READ	0x0001
-#define NFS4_SHARE_DENY_WRITE	0x0002
-#define NFS4_SHARE_DENY_BOTH	0x0003
-
-/* nfs41 */
-#define NFS4_SHARE_WANT_MASK		0xFF00
-#define NFS4_SHARE_WANT_NO_PREFERENCE	0x0000
-#define NFS4_SHARE_WANT_READ_DELEG	0x0100
-#define NFS4_SHARE_WANT_WRITE_DELEG	0x0200
-#define NFS4_SHARE_WANT_ANY_DELEG	0x0300
-#define NFS4_SHARE_WANT_NO_DELEG	0x0400
-#define NFS4_SHARE_WANT_CANCEL		0x0500
-
-#define NFS4_SHARE_WHEN_MASK		0xF0000
-#define NFS4_SHARE_SIGNAL_DELEG_WHEN_RESRC_AVAIL	0x10000
-#define NFS4_SHARE_PUSH_DELEG_WHEN_UNCONTENDED		0x20000
-
-#define NFS4_CDFC4_FORE	0x1
-#define NFS4_CDFC4_BACK 0x2
-#define NFS4_CDFC4_BOTH 0x3
-#define NFS4_CDFC4_FORE_OR_BOTH 0x3
-#define NFS4_CDFC4_BACK_OR_BOTH 0x7
-
-#define NFS4_SET_TO_SERVER_TIME	0
-#define NFS4_SET_TO_CLIENT_TIME	1
-
-#define NFS4_ACE_ACCESS_ALLOWED_ACE_TYPE 0
-#define NFS4_ACE_ACCESS_DENIED_ACE_TYPE  1
-#define NFS4_ACE_SYSTEM_AUDIT_ACE_TYPE   2
-#define NFS4_ACE_SYSTEM_ALARM_ACE_TYPE   3
-
-#define ACL4_SUPPORT_ALLOW_ACL 0x01
-#define ACL4_SUPPORT_DENY_ACL  0x02
-#define ACL4_SUPPORT_AUDIT_ACL 0x04
-#define ACL4_SUPPORT_ALARM_ACL 0x08
-
-#define NFS4_ACE_FILE_INHERIT_ACE             0x00000001
-#define NFS4_ACE_DIRECTORY_INHERIT_ACE        0x00000002
-#define NFS4_ACE_NO_PROPAGATE_INHERIT_ACE     0x00000004
-#define NFS4_ACE_INHERIT_ONLY_ACE             0x00000008
-#define NFS4_ACE_SUCCESSFUL_ACCESS_ACE_FLAG   0x00000010
-#define NFS4_ACE_FAILED_ACCESS_ACE_FLAG       0x00000020
-#define NFS4_ACE_IDENTIFIER_GROUP             0x00000040
-
-#define NFS4_ACE_READ_DATA                    0x00000001
-#define NFS4_ACE_LIST_DIRECTORY               0x00000001
-#define NFS4_ACE_WRITE_DATA                   0x00000002
-#define NFS4_ACE_ADD_FILE                     0x00000002
-#define NFS4_ACE_APPEND_DATA                  0x00000004
-#define NFS4_ACE_ADD_SUBDIRECTORY             0x00000004
-#define NFS4_ACE_READ_NAMED_ATTRS             0x00000008
-#define NFS4_ACE_WRITE_NAMED_ATTRS            0x00000010
-#define NFS4_ACE_EXECUTE                      0x00000020
-#define NFS4_ACE_DELETE_CHILD                 0x00000040
-#define NFS4_ACE_READ_ATTRIBUTES              0x00000080
-#define NFS4_ACE_WRITE_ATTRIBUTES             0x00000100
-#define NFS4_ACE_DELETE                       0x00010000
-#define NFS4_ACE_READ_ACL                     0x00020000
-#define NFS4_ACE_WRITE_ACL                    0x00040000
-#define NFS4_ACE_WRITE_OWNER                  0x00080000
-#define NFS4_ACE_SYNCHRONIZE                  0x00100000
-#define NFS4_ACE_GENERIC_READ                 0x00120081
-#define NFS4_ACE_GENERIC_WRITE                0x00160106
-#define NFS4_ACE_GENERIC_EXECUTE              0x001200A0
-#define NFS4_ACE_MASK_ALL                     0x001F01FF
-
-#define EXCHGID4_FLAG_SUPP_MOVED_REFER		0x00000001
-#define EXCHGID4_FLAG_SUPP_MOVED_MIGR		0x00000002
-#define EXCHGID4_FLAG_BIND_PRINC_STATEID	0x00000100
-
-#define EXCHGID4_FLAG_USE_NON_PNFS		0x00010000
-#define EXCHGID4_FLAG_USE_PNFS_MDS		0x00020000
-#define EXCHGID4_FLAG_USE_PNFS_DS		0x00040000
-#define EXCHGID4_FLAG_MASK_PNFS			0x00070000
-
-#define EXCHGID4_FLAG_UPD_CONFIRMED_REC_A	0x40000000
-#define EXCHGID4_FLAG_CONFIRMED_R		0x80000000
-/*
- * Since the validity of these bits depends on whether
- * they're set in the argument or response, have separate
- * invalid flag masks for arg (_A) and resp (_R).
- */
-#define EXCHGID4_FLAG_MASK_A			0x40070103
-#define EXCHGID4_FLAG_MASK_R			0x80070103
-
-#define SEQ4_STATUS_CB_PATH_DOWN		0x00000001
-#define SEQ4_STATUS_CB_GSS_CONTEXTS_EXPIRING	0x00000002
-#define SEQ4_STATUS_CB_GSS_CONTEXTS_EXPIRED	0x00000004
-#define SEQ4_STATUS_EXPIRED_ALL_STATE_REVOKED	0x00000008
-#define SEQ4_STATUS_EXPIRED_SOME_STATE_REVOKED	0x00000010
-#define SEQ4_STATUS_ADMIN_STATE_REVOKED		0x00000020
-#define SEQ4_STATUS_RECALLABLE_STATE_REVOKED	0x00000040
-#define SEQ4_STATUS_LEASE_MOVED			0x00000080
-#define SEQ4_STATUS_RESTART_RECLAIM_NEEDED	0x00000100
-#define SEQ4_STATUS_CB_PATH_DOWN_SESSION	0x00000200
-#define SEQ4_STATUS_BACKCHANNEL_FAULT		0x00000400
-
-#define NFS4_SECINFO_STYLE4_CURRENT_FH	0
-#define NFS4_SECINFO_STYLE4_PARENT	1
-
-#define NFS4_MAX_UINT64	(~(u64)0)
-
-/* An NFS4 sessions server must support at least NFS4_MAX_OPS operations.
- * If a compound requires more operations, adjust NFS4_MAX_OPS accordingly.
- */
-#define NFS4_MAX_OPS   8
-
-/* Our NFS4 client back channel server only wants the cb_sequene and the
- * actual operation per compound
- */
-#define NFS4_MAX_BACK_CHANNEL_OPS 2
-
-enum nfs4_acl_whotype {
-	NFS4_ACL_WHO_NAMED = 0,
-	NFS4_ACL_WHO_OWNER,
-	NFS4_ACL_WHO_GROUP,
-	NFS4_ACL_WHO_EVERYONE,
-};
-
-#ifdef __KERNEL__
-#include <linux/list.h>
-
-struct nfs4_ace {
-	uint32_t	type;
-	uint32_t	flag;
-	uint32_t	access_mask;
-	int		whotype;
-	uid_t		who;
-};
-
-struct nfs4_acl {
-	uint32_t	naces;
-	struct nfs4_ace	aces[0];
-};
-
-typedef struct { char data[NFS4_VERIFIER_SIZE]; } nfs4_verifier;
-
-struct nfs_stateid4 {
-	__be32 seqid;
-	char other[NFS4_STATEID_OTHER_SIZE];
-} __attribute__ ((packed));
-
-typedef struct nfs_stateid4 nfs4_stateid;
-
-enum nfs_opnum4 {
-	OP_ACCESS = 3,
-	OP_CLOSE = 4,
-	OP_COMMIT = 5,
-	OP_CREATE = 6,
-	OP_DELEGPURGE = 7,
-	OP_DELEGRETURN = 8,
-	OP_GETATTR = 9,
-	OP_GETFH = 10,
-	OP_LINK = 11,
-	OP_LOCK = 12,
-	OP_LOCKT = 13,
-	OP_LOCKU = 14,
-	OP_LOOKUP = 15,
-	OP_LOOKUPP = 16,
-	OP_NVERIFY = 17,
-	OP_OPEN = 18,
-	OP_OPENATTR = 19,
-	OP_OPEN_CONFIRM = 20,
-	OP_OPEN_DOWNGRADE = 21,
-	OP_PUTFH = 22,
-	OP_PUTPUBFH = 23,
-	OP_PUTROOTFH = 24,
-	OP_READ = 25,
-	OP_READDIR = 26,
-	OP_READLINK = 27,
-	OP_REMOVE = 28,
-	OP_RENAME = 29,
-	OP_RENEW = 30,
-	OP_RESTOREFH = 31,
-	OP_SAVEFH = 32,
-	OP_SECINFO = 33,
-	OP_SETATTR = 34,
-	OP_SETCLIENTID = 35,
-	OP_SETCLIENTID_CONFIRM = 36,
-	OP_VERIFY = 37,
-	OP_WRITE = 38,
-	OP_RELEASE_LOCKOWNER = 39,
-
-	/* nfs41 */
-	OP_BACKCHANNEL_CTL = 40,
-	OP_BIND_CONN_TO_SESSION = 41,
-	OP_EXCHANGE_ID = 42,
-	OP_CREATE_SESSION = 43,
-	OP_DESTROY_SESSION = 44,
-	OP_FREE_STATEID = 45,
-	OP_GET_DIR_DELEGATION = 46,
-	OP_GETDEVICEINFO = 47,
-	OP_GETDEVICELIST = 48,
-	OP_LAYOUTCOMMIT = 49,
-	OP_LAYOUTGET = 50,
-	OP_LAYOUTRETURN = 51,
-	OP_SECINFO_NO_NAME = 52,
-	OP_SEQUENCE = 53,
-	OP_SET_SSV = 54,
-	OP_TEST_STATEID = 55,
-	OP_WANT_DELEGATION = 56,
-	OP_DESTROY_CLIENTID = 57,
-	OP_RECLAIM_COMPLETE = 58,
-
-	OP_ILLEGAL = 10044,
-};
-
-/*Defining first and last NFS4 operations implemented.
-Needs to be updated if more operations are defined in future.*/
-
-#define FIRST_NFS4_OP	OP_ACCESS
-#define LAST_NFS4_OP 	OP_RECLAIM_COMPLETE
-
-enum nfsstat4 {
-	NFS4_OK = 0,
-	NFS4ERR_PERM = 1,
-	NFS4ERR_NOENT = 2,
-	NFS4ERR_IO = 5,
-	NFS4ERR_NXIO = 6,
-	NFS4ERR_ACCESS = 13,
-	NFS4ERR_EXIST = 17,
-	NFS4ERR_XDEV = 18,
-	/* Unused/reserved 19 */
-	NFS4ERR_NOTDIR = 20,
-	NFS4ERR_ISDIR = 21,
-	NFS4ERR_INVAL = 22,
-	NFS4ERR_FBIG = 27,
-	NFS4ERR_NOSPC = 28,
-	NFS4ERR_ROFS = 30,
-	NFS4ERR_MLINK = 31,
-	NFS4ERR_NAMETOOLONG = 63,
-	NFS4ERR_NOTEMPTY = 66,
-	NFS4ERR_DQUOT = 69,
-	NFS4ERR_STALE = 70,
-	NFS4ERR_BADHANDLE = 10001,
-	NFS4ERR_BAD_COOKIE = 10003,
-	NFS4ERR_NOTSUPP = 10004,
-	NFS4ERR_TOOSMALL = 10005,
-	NFS4ERR_SERVERFAULT = 10006,
-	NFS4ERR_BADTYPE = 10007,
-	NFS4ERR_DELAY = 10008,
-	NFS4ERR_SAME = 10009,
-	NFS4ERR_DENIED = 10010,
-	NFS4ERR_EXPIRED = 10011,
-	NFS4ERR_LOCKED = 10012,
-	NFS4ERR_GRACE = 10013,
-	NFS4ERR_FHEXPIRED = 10014,
-	NFS4ERR_SHARE_DENIED = 10015,
-	NFS4ERR_WRONGSEC = 10016,
-	NFS4ERR_CLID_INUSE = 10017,
-	NFS4ERR_RESOURCE = 10018,
-	NFS4ERR_MOVED = 10019,
-	NFS4ERR_NOFILEHANDLE = 10020,
-	NFS4ERR_MINOR_VERS_MISMATCH = 10021,
-	NFS4ERR_STALE_CLIENTID = 10022,
-	NFS4ERR_STALE_STATEID = 10023,
-	NFS4ERR_OLD_STATEID = 10024,
-	NFS4ERR_BAD_STATEID = 10025,
-	NFS4ERR_BAD_SEQID = 10026,
-	NFS4ERR_NOT_SAME = 10027,
-	NFS4ERR_LOCK_RANGE = 10028,
-	NFS4ERR_SYMLINK = 10029,
-	NFS4ERR_RESTOREFH = 10030,
-	NFS4ERR_LEASE_MOVED = 10031,
-	NFS4ERR_ATTRNOTSUPP = 10032,
-	NFS4ERR_NO_GRACE = 10033,
-	NFS4ERR_RECLAIM_BAD = 10034,
-	NFS4ERR_RECLAIM_CONFLICT = 10035,
-	NFS4ERR_BADXDR = 10036,
-	NFS4ERR_LOCKS_HELD = 10037,
-	NFS4ERR_OPENMODE = 10038,
-	NFS4ERR_BADOWNER = 10039,
-	NFS4ERR_BADCHAR = 10040,
-	NFS4ERR_BADNAME = 10041,
-	NFS4ERR_BAD_RANGE = 10042,
-	NFS4ERR_LOCK_NOTSUPP = 10043,
-	NFS4ERR_OP_ILLEGAL = 10044,
-	NFS4ERR_DEADLOCK = 10045,
-	NFS4ERR_FILE_OPEN = 10046,
-	NFS4ERR_ADMIN_REVOKED = 10047,
-	NFS4ERR_CB_PATH_DOWN = 10048,
-
-	/* nfs41 */
-	NFS4ERR_BADIOMODE	= 10049,
-	NFS4ERR_BADLAYOUT	= 10050,
-	NFS4ERR_BAD_SESSION_DIGEST = 10051,
-	NFS4ERR_BADSESSION	= 10052,
-	NFS4ERR_BADSLOT		= 10053,
-	NFS4ERR_COMPLETE_ALREADY = 10054,
-	NFS4ERR_CONN_NOT_BOUND_TO_SESSION = 10055,
-	NFS4ERR_DELEG_ALREADY_WANTED = 10056,
-	NFS4ERR_BACK_CHAN_BUSY	= 10057,	/* backchan reqs outstanding */
-	NFS4ERR_LAYOUTTRYLATER	= 10058,
-	NFS4ERR_LAYOUTUNAVAILABLE = 10059,
-	NFS4ERR_NOMATCHING_LAYOUT = 10060,
-	NFS4ERR_RECALLCONFLICT	= 10061,
-	NFS4ERR_UNKNOWN_LAYOUTTYPE = 10062,
-	NFS4ERR_SEQ_MISORDERED = 10063, 	/* unexpected seq.id in req */
-	NFS4ERR_SEQUENCE_POS	= 10064,	/* [CB_]SEQ. op not 1st op */
-	NFS4ERR_REQ_TOO_BIG	= 10065,	/* request too big */
-	NFS4ERR_REP_TOO_BIG	= 10066,	/* reply too big */
-	NFS4ERR_REP_TOO_BIG_TO_CACHE = 10067,	/* rep. not all cached */
-	NFS4ERR_RETRY_UNCACHED_REP = 10068,	/* retry & rep. uncached */
-	NFS4ERR_UNSAFE_COMPOUND = 10069,	/* retry/recovery too hard */
-	NFS4ERR_TOO_MANY_OPS	= 10070,	/* too many ops in [CB_]COMP */
-	NFS4ERR_OP_NOT_IN_SESSION = 10071,	/* op needs [CB_]SEQ. op */
-	NFS4ERR_HASH_ALG_UNSUPP = 10072,	/* hash alg. not supp. */
-						/* Error 10073 is unused. */
-	NFS4ERR_CLIENTID_BUSY	= 10074,	/* clientid has state */
-	NFS4ERR_PNFS_IO_HOLE	= 10075,	/* IO to _SPARSE file hole */
-	NFS4ERR_SEQ_FALSE_RETRY	= 10076,	/* retry not original */
-	NFS4ERR_BAD_HIGH_SLOT	= 10077,	/* sequence arg bad */
-	NFS4ERR_DEADSESSION	= 10078,	/* persistent session dead */
-	NFS4ERR_ENCR_ALG_UNSUPP = 10079,	/* SSV alg mismatch */
-	NFS4ERR_PNFS_NO_LAYOUT	= 10080,	/* direct I/O with no layout */
-	NFS4ERR_NOT_ONLY_OP	= 10081,	/* bad compound */
-	NFS4ERR_WRONG_CRED	= 10082,	/* permissions:state change */
-	NFS4ERR_WRONG_TYPE	= 10083,	/* current operation mismatch */
-	NFS4ERR_DIRDELEG_UNAVAIL = 10084,	/* no directory delegation */
-	NFS4ERR_REJECT_DELEG	= 10085,	/* on callback */
-	NFS4ERR_RETURNCONFLICT	= 10086,	/* outstanding layoutreturn */
-	NFS4ERR_DELEG_REVOKED	= 10087,	/* deleg./layout revoked */
-};
-
-static inline bool seqid_mutating_err(u32 err)
-{
-	/* rfc 3530 section 8.1.5: */
-	switch (err) {
-	case NFS4ERR_STALE_CLIENTID:
-	case NFS4ERR_STALE_STATEID:
-	case NFS4ERR_BAD_STATEID:
-	case NFS4ERR_BAD_SEQID:
-	case NFS4ERR_BADXDR:
-	case NFS4ERR_RESOURCE:
-	case NFS4ERR_NOFILEHANDLE:
-		return false;
-	};
-	return true;
-}
-
-/*
- * Note: NF4BAD is not actually part of the protocol; it is just used
- * internally by nfsd.
- */
-enum nfs_ftype4 {
-	NF4BAD		= 0,
-        NF4REG          = 1,    /* Regular File */
-        NF4DIR          = 2,    /* Directory */
-        NF4BLK          = 3,    /* Special File - block device */
-        NF4CHR          = 4,    /* Special File - character device */
-        NF4LNK          = 5,    /* Symbolic Link */
-        NF4SOCK         = 6,    /* Special File - socket */
-        NF4FIFO         = 7,    /* Special File - fifo */
-        NF4ATTRDIR      = 8,    /* Attribute Directory */
-        NF4NAMEDATTR    = 9     /* Named Attribute */
-};
-
-enum open_claim_type4 {
-	NFS4_OPEN_CLAIM_NULL = 0,
-	NFS4_OPEN_CLAIM_PREVIOUS = 1,
-	NFS4_OPEN_CLAIM_DELEGATE_CUR = 2,
-	NFS4_OPEN_CLAIM_DELEGATE_PREV = 3,
-	NFS4_OPEN_CLAIM_FH = 4, /* 4.1 */
-	NFS4_OPEN_CLAIM_DELEG_CUR_FH = 5, /* 4.1 */
-	NFS4_OPEN_CLAIM_DELEG_PREV_FH = 6, /* 4.1 */
-};
-
-enum opentype4 {
-	NFS4_OPEN_NOCREATE = 0,
-	NFS4_OPEN_CREATE = 1
-};
-
-enum createmode4 {
-	NFS4_CREATE_UNCHECKED = 0,
-	NFS4_CREATE_GUARDED = 1,
-	NFS4_CREATE_EXCLUSIVE = 2,
-	/*
-	 * New to NFSv4.1. If session is persistent,
-	 * GUARDED4 MUST be used. Otherwise, use
-	 * EXCLUSIVE4_1 instead of EXCLUSIVE4.
-	 */
-	NFS4_CREATE_EXCLUSIVE4_1 = 3
-};
-
-enum limit_by4 {
-	NFS4_LIMIT_SIZE = 1,
-	NFS4_LIMIT_BLOCKS = 2
-};
-
-enum open_delegation_type4 {
-	NFS4_OPEN_DELEGATE_NONE = 0,
-	NFS4_OPEN_DELEGATE_READ = 1,
-	NFS4_OPEN_DELEGATE_WRITE = 2,
-	NFS4_OPEN_DELEGATE_NONE_EXT = 3, /* 4.1 */
-};
-
-enum why_no_delegation4 { /* new to v4.1 */
-	WND4_NOT_WANTED = 0,
-	WND4_CONTENTION = 1,
-	WND4_RESOURCE = 2,
-	WND4_NOT_SUPP_FTYPE = 3,
-	WND4_WRITE_DELEG_NOT_SUPP_FTYPE = 4,
-	WND4_NOT_SUPP_UPGRADE = 5,
-	WND4_NOT_SUPP_DOWNGRADE = 6,
-	WND4_CANCELLED = 7,
-	WND4_IS_DIR = 8,
-};
-
-enum lock_type4 {
-	NFS4_UNLOCK_LT = 0,
-	NFS4_READ_LT = 1,
-	NFS4_WRITE_LT = 2,
-	NFS4_READW_LT = 3,
-	NFS4_WRITEW_LT = 4
-};
-
-
-/* Mandatory Attributes */
-#define FATTR4_WORD0_SUPPORTED_ATTRS    (1UL << 0)
-#define FATTR4_WORD0_TYPE               (1UL << 1)
-#define FATTR4_WORD0_FH_EXPIRE_TYPE     (1UL << 2)
-#define FATTR4_WORD0_CHANGE             (1UL << 3)
-#define FATTR4_WORD0_SIZE               (1UL << 4)
-#define FATTR4_WORD0_LINK_SUPPORT       (1UL << 5)
-#define FATTR4_WORD0_SYMLINK_SUPPORT    (1UL << 6)
-#define FATTR4_WORD0_NAMED_ATTR         (1UL << 7)
-#define FATTR4_WORD0_FSID               (1UL << 8)
-#define FATTR4_WORD0_UNIQUE_HANDLES     (1UL << 9)
-#define FATTR4_WORD0_LEASE_TIME         (1UL << 10)
-#define FATTR4_WORD0_RDATTR_ERROR       (1UL << 11)
-/* Mandatory in NFSv4.1 */
-#define FATTR4_WORD2_SUPPATTR_EXCLCREAT (1UL << 11)
-
-/* Recommended Attributes */
-#define FATTR4_WORD0_ACL                (1UL << 12)
-#define FATTR4_WORD0_ACLSUPPORT         (1UL << 13)
-#define FATTR4_WORD0_ARCHIVE            (1UL << 14)
-#define FATTR4_WORD0_CANSETTIME         (1UL << 15)
-#define FATTR4_WORD0_CASE_INSENSITIVE   (1UL << 16)
-#define FATTR4_WORD0_CASE_PRESERVING    (1UL << 17)
-#define FATTR4_WORD0_CHOWN_RESTRICTED   (1UL << 18)
-#define FATTR4_WORD0_FILEHANDLE         (1UL << 19)
-#define FATTR4_WORD0_FILEID             (1UL << 20)
-#define FATTR4_WORD0_FILES_AVAIL        (1UL << 21)
-#define FATTR4_WORD0_FILES_FREE         (1UL << 22)
-#define FATTR4_WORD0_FILES_TOTAL        (1UL << 23)
-#define FATTR4_WORD0_FS_LOCATIONS       (1UL << 24)
-#define FATTR4_WORD0_HIDDEN             (1UL << 25)
-#define FATTR4_WORD0_HOMOGENEOUS        (1UL << 26)
-#define FATTR4_WORD0_MAXFILESIZE        (1UL << 27)
-#define FATTR4_WORD0_MAXLINK            (1UL << 28)
-#define FATTR4_WORD0_MAXNAME            (1UL << 29)
-#define FATTR4_WORD0_MAXREAD            (1UL << 30)
-#define FATTR4_WORD0_MAXWRITE           (1UL << 31)
-#define FATTR4_WORD1_MIMETYPE           (1UL << 0)
-#define FATTR4_WORD1_MODE               (1UL << 1)
-#define FATTR4_WORD1_NO_TRUNC           (1UL << 2)
-#define FATTR4_WORD1_NUMLINKS           (1UL << 3)
-#define FATTR4_WORD1_OWNER              (1UL << 4)
-#define FATTR4_WORD1_OWNER_GROUP        (1UL << 5)
-#define FATTR4_WORD1_QUOTA_HARD         (1UL << 6)
-#define FATTR4_WORD1_QUOTA_SOFT         (1UL << 7)
-#define FATTR4_WORD1_QUOTA_USED         (1UL << 8)
-#define FATTR4_WORD1_RAWDEV             (1UL << 9)
-#define FATTR4_WORD1_SPACE_AVAIL        (1UL << 10)
-#define FATTR4_WORD1_SPACE_FREE         (1UL << 11)
-#define FATTR4_WORD1_SPACE_TOTAL        (1UL << 12)
-#define FATTR4_WORD1_SPACE_USED         (1UL << 13)
-#define FATTR4_WORD1_SYSTEM             (1UL << 14)
-#define FATTR4_WORD1_TIME_ACCESS        (1UL << 15)
-#define FATTR4_WORD1_TIME_ACCESS_SET    (1UL << 16)
-#define FATTR4_WORD1_TIME_BACKUP        (1UL << 17)
-#define FATTR4_WORD1_TIME_CREATE        (1UL << 18)
-#define FATTR4_WORD1_TIME_DELTA         (1UL << 19)
-#define FATTR4_WORD1_TIME_METADATA      (1UL << 20)
-#define FATTR4_WORD1_TIME_MODIFY        (1UL << 21)
-#define FATTR4_WORD1_TIME_MODIFY_SET    (1UL << 22)
-#define FATTR4_WORD1_MOUNTED_ON_FILEID  (1UL << 23)
-#define FATTR4_WORD1_FS_LAYOUT_TYPES    (1UL << 30)
-#define FATTR4_WORD2_LAYOUT_BLKSIZE     (1UL << 1)
-
-#define NFSPROC4_NULL 0
-#define NFSPROC4_COMPOUND 1
-#define NFS4_VERSION 4
-#define NFS4_MINOR_VERSION 0
-
-#if defined(CONFIG_NFS_V4_1)
-#define NFS4_MAX_MINOR_VERSION 1
-#else
-#define NFS4_MAX_MINOR_VERSION 0
-#endif /* CONFIG_NFS_V4_1 */
-
-#define NFS4_DEBUG 1
-
-/* Index of predefined Linux client operations */
-
-enum {
-	NFSPROC4_CLNT_NULL = 0,		/* Unused */
-	NFSPROC4_CLNT_READ,
-	NFSPROC4_CLNT_WRITE,
-	NFSPROC4_CLNT_COMMIT,
-	NFSPROC4_CLNT_OPEN,
-	NFSPROC4_CLNT_OPEN_CONFIRM,
-	NFSPROC4_CLNT_OPEN_NOATTR,
-	NFSPROC4_CLNT_OPEN_DOWNGRADE,
-	NFSPROC4_CLNT_CLOSE,
-	NFSPROC4_CLNT_SETATTR,
-	NFSPROC4_CLNT_FSINFO,
-	NFSPROC4_CLNT_RENEW,
-	NFSPROC4_CLNT_SETCLIENTID,
-	NFSPROC4_CLNT_SETCLIENTID_CONFIRM,
-	NFSPROC4_CLNT_LOCK,
-	NFSPROC4_CLNT_LOCKT,
-	NFSPROC4_CLNT_LOCKU,
-	NFSPROC4_CLNT_ACCESS,
-	NFSPROC4_CLNT_GETATTR,
-	NFSPROC4_CLNT_LOOKUP,
-	NFSPROC4_CLNT_LOOKUP_ROOT,
-	NFSPROC4_CLNT_REMOVE,
-	NFSPROC4_CLNT_RENAME,
-	NFSPROC4_CLNT_LINK,
-	NFSPROC4_CLNT_SYMLINK,
-	NFSPROC4_CLNT_CREATE,
-	NFSPROC4_CLNT_PATHCONF,
-	NFSPROC4_CLNT_STATFS,
-	NFSPROC4_CLNT_READLINK,
-	NFSPROC4_CLNT_READDIR,
-	NFSPROC4_CLNT_SERVER_CAPS,
-	NFSPROC4_CLNT_DELEGRETURN,
-	NFSPROC4_CLNT_GETACL,
-	NFSPROC4_CLNT_SETACL,
-	NFSPROC4_CLNT_FS_LOCATIONS,
-	NFSPROC4_CLNT_RELEASE_LOCKOWNER,
-	NFSPROC4_CLNT_SECINFO,
-
-	/* nfs41 */
-	NFSPROC4_CLNT_EXCHANGE_ID,
-	NFSPROC4_CLNT_CREATE_SESSION,
-	NFSPROC4_CLNT_DESTROY_SESSION,
-	NFSPROC4_CLNT_SEQUENCE,
-	NFSPROC4_CLNT_GET_LEASE_TIME,
-	NFSPROC4_CLNT_RECLAIM_COMPLETE,
-	NFSPROC4_CLNT_LAYOUTGET,
-	NFSPROC4_CLNT_GETDEVICEINFO,
-	NFSPROC4_CLNT_LAYOUTCOMMIT,
-	NFSPROC4_CLNT_LAYOUTRETURN,
-	NFSPROC4_CLNT_SECINFO_NO_NAME,
-	NFSPROC4_CLNT_TEST_STATEID,
-	NFSPROC4_CLNT_FREE_STATEID,
-	NFSPROC4_CLNT_GETDEVICELIST,
-};
-
-/* nfs41 types */
-struct nfs4_sessionid {
-	unsigned char data[NFS4_MAX_SESSIONID_LEN];
-};
-
-/* Create Session Flags */
-#define SESSION4_PERSIST	0x001
-#define SESSION4_BACK_CHAN	0x002
-#define SESSION4_RDMA		0x004
-
-#define SESSION4_FLAG_MASK_A	0x007
-
-enum state_protect_how4 {
-	SP4_NONE	= 0,
-	SP4_MACH_CRED	= 1,
-	SP4_SSV		= 2
-};
-
-enum pnfs_layouttype {
-	LAYOUT_NFSV4_1_FILES  = 1,
-	LAYOUT_OSD2_OBJECTS = 2,
-	LAYOUT_BLOCK_VOLUME = 3,
-};
-
-/* used for both layout return and recall */
-enum pnfs_layoutreturn_type {
-	RETURN_FILE = 1,
-	RETURN_FSID = 2,
-	RETURN_ALL  = 3
-};
-
-enum pnfs_iomode {
-	IOMODE_READ = 1,
-	IOMODE_RW = 2,
-	IOMODE_ANY = 3,
-};
-
-enum pnfs_notify_deviceid_type4 {
-	NOTIFY_DEVICEID4_CHANGE = 1 << 1,
-	NOTIFY_DEVICEID4_DELETE = 1 << 2,
-};
-
-#define NFL4_UFLG_MASK			0x0000003F
-#define NFL4_UFLG_DENSE			0x00000001
-#define NFL4_UFLG_COMMIT_THRU_MDS	0x00000002
-#define NFL4_UFLG_STRIPE_UNIT_SIZE_MASK	0xFFFFFFC0
-
-/* Encoded in the loh_body field of type layouthint4 */
-enum filelayout_hint_care4 {
-	NFLH4_CARE_DENSE		= NFL4_UFLG_DENSE,
-	NFLH4_CARE_COMMIT_THRU_MDS	= NFL4_UFLG_COMMIT_THRU_MDS,
-	NFLH4_CARE_STRIPE_UNIT_SIZE	= 0x00000040,
-	NFLH4_CARE_STRIPE_COUNT		= 0x00000080
-};
-
-#define NFS4_DEVICEID4_SIZE 16
-
-struct nfs4_deviceid {
-	char data[NFS4_DEVICEID4_SIZE];
-};
-
-#endif
-#endif
-
-/*
- * Local variables:
- *  c-basic-offset: 8
- * End:
- */
diff --git a/ANDROID_3.4.5/include/linux/nfs4_mount.h b/ANDROID_3.4.5/include/linux/nfs4_mount.h
deleted file mode 100644
index a0dcf665..00000000
--- a/ANDROID_3.4.5/include/linux/nfs4_mount.h
+++ /dev/null
@@ -1,71 +0,0 @@
-#ifndef _LINUX_NFS4_MOUNT_H
-#define _LINUX_NFS4_MOUNT_H
-
-/*
- *  linux/include/linux/nfs4_mount.h
- *
- *  Copyright (C) 2002  Trond Myklebust
- *
- *  structure passed from user-space to kernel-space during an nfsv4 mount
- */
-
-/*
- * WARNING!  Do not delete or change the order of these fields.  If
- * a new field is required then add it to the end.  The version field
- * tracks which fields are present.  This will ensure some measure of
- * mount-to-kernel version compatibility.  Some of these aren't used yet
- * but here they are anyway.
- */
-#define NFS4_MOUNT_VERSION	1
-
-struct nfs_string {
-	unsigned int len;
-	const char __user * data;
-};
-
-struct nfs4_mount_data {
-	int version;				/* 1 */
-	int flags;				/* 1 */
-	int rsize;				/* 1 */
-	int wsize;				/* 1 */
-	int timeo;				/* 1 */
-	int retrans;				/* 1 */
-	int acregmin;				/* 1 */
-	int acregmax;				/* 1 */
-	int acdirmin;				/* 1 */
-	int acdirmax;				/* 1 */
-
-	/* see the definition of 'struct clientaddr4' in RFC3010 */
-	struct nfs_string client_addr;		/* 1 */
-
-	/* Mount path */
-	struct nfs_string mnt_path;		/* 1 */
-
-	/* Server details */
-	struct nfs_string hostname;		/* 1 */
-	/* Server IP address */
-	unsigned int host_addrlen;		/* 1 */
-	struct sockaddr __user * host_addr;	/* 1 */
-
-	/* Transport protocol to use */
-	int proto;				/* 1 */
-
-	/* Pseudo-flavours to use for authentication. See RFC2623 */
-	int auth_flavourlen;			/* 1 */
-	int __user *auth_flavours;		/* 1 */
-};
-
-/* bits in the flags field */
-/* Note: the fields that correspond to existing NFSv2/v3 mount options
- * 	 should mirror the values from include/linux/nfs_mount.h
- */
-
-#define NFS4_MOUNT_SOFT		0x0001	/* 1 */
-#define NFS4_MOUNT_INTR		0x0002	/* 1 */
-#define NFS4_MOUNT_NOCTO	0x0010	/* 1 */
-#define NFS4_MOUNT_NOAC		0x0020	/* 1 */
-#define NFS4_MOUNT_STRICTLOCK	0x1000	/* 1 */
-#define NFS4_MOUNT_UNSHARED	0x8000	/* 1 */
-#define NFS4_MOUNT_FLAGMASK	0x9033
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/nfs_fs.h b/ANDROID_3.4.5/include/linux/nfs_fs.h
deleted file mode 100644
index 52a1bdb4..00000000
--- a/ANDROID_3.4.5/include/linux/nfs_fs.h
+++ /dev/null
@@ -1,671 +0,0 @@
-/*
- *  linux/include/linux/nfs_fs.h
- *
- *  Copyright (C) 1992  Rick Sladkey
- *
- *  OS-specific nfs filesystem definitions and declarations
- */
-
-#ifndef _LINUX_NFS_FS_H
-#define _LINUX_NFS_FS_H
-
-#include <linux/magic.h>
-
-/* Default timeout values */
-#define NFS_DEF_UDP_TIMEO	(11)
-#define NFS_DEF_UDP_RETRANS	(3)
-#define NFS_DEF_TCP_TIMEO	(600)
-#define NFS_DEF_TCP_RETRANS	(2)
-
-#define NFS_MAX_UDP_TIMEOUT	(60*HZ)
-#define NFS_MAX_TCP_TIMEOUT	(600*HZ)
-
-#define NFS_DEF_ACREGMIN	(3)
-#define NFS_DEF_ACREGMAX	(60)
-#define NFS_DEF_ACDIRMIN	(30)
-#define NFS_DEF_ACDIRMAX	(60)
-
-/*
- * When flushing a cluster of dirty pages, there can be different
- * strategies:
- */
-#define FLUSH_SYNC		1	/* file being synced, or contention */
-#define FLUSH_STABLE		4	/* commit to stable storage */
-#define FLUSH_LOWPRI		8	/* low priority background flush */
-#define FLUSH_HIGHPRI		16	/* high priority memory reclaim flush */
-#define FLUSH_COND_STABLE	32	/* conditional stable write - only stable
-					 * if everything fits in one RPC */
-
-#ifdef __KERNEL__
-
-/*
- * Enable dprintk() debugging support for nfs client.
- */
-#ifdef CONFIG_NFS_DEBUG
-# define NFS_DEBUG
-#endif
-
-#include <linux/in.h>
-#include <linux/mm.h>
-#include <linux/pagemap.h>
-#include <linux/rbtree.h>
-#include <linux/rwsem.h>
-#include <linux/wait.h>
-
-#include <linux/sunrpc/debug.h>
-#include <linux/sunrpc/auth.h>
-#include <linux/sunrpc/clnt.h>
-
-#include <linux/nfs.h>
-#include <linux/nfs2.h>
-#include <linux/nfs3.h>
-#include <linux/nfs4.h>
-#include <linux/nfs_xdr.h>
-#include <linux/nfs_fs_sb.h>
-
-#include <linux/mempool.h>
-
-/*
- * These are the default flags for swap requests
- */
-#define NFS_RPC_SWAPFLAGS		(RPC_TASK_SWAPPER|RPC_TASK_ROOTCREDS)
-
-/*
- * NFSv3/v4 Access mode cache entry
- */
-struct nfs_access_entry {
-	struct rb_node		rb_node;
-	struct list_head	lru;
-	unsigned long		jiffies;
-	struct rpc_cred *	cred;
-	int			mask;
-};
-
-struct nfs_lock_context {
-	atomic_t count;
-	struct list_head list;
-	struct nfs_open_context *open_context;
-	fl_owner_t lockowner;
-	pid_t pid;
-};
-
-struct nfs4_state;
-struct nfs_open_context {
-	struct nfs_lock_context lock_context;
-	struct dentry *dentry;
-	struct rpc_cred *cred;
-	struct nfs4_state *state;
-	fmode_t mode;
-
-	unsigned long flags;
-#define NFS_CONTEXT_ERROR_WRITE		(0)
-	int error;
-
-	struct list_head list;
-};
-
-struct nfs_open_dir_context {
-	struct rpc_cred *cred;
-	unsigned long attr_gencount;
-	__u64 dir_cookie;
-	__u64 dup_cookie;
-	signed char duped;
-};
-
-/*
- * NFSv4 delegation
- */
-struct nfs_delegation;
-
-struct posix_acl;
-
-/*
- * nfs fs inode data in memory
- */
-struct nfs_inode {
-	/*
-	 * The 64bit 'inode number'
-	 */
-	__u64 fileid;
-
-	/*
-	 * NFS file handle
-	 */
-	struct nfs_fh		fh;
-
-	/*
-	 * Various flags
-	 */
-	unsigned long		flags;			/* atomic bit ops */
-	unsigned long		cache_validity;		/* bit mask */
-
-	/*
-	 * read_cache_jiffies is when we started read-caching this inode.
-	 * attrtimeo is for how long the cached information is assumed
-	 * to be valid. A successful attribute revalidation doubles
-	 * attrtimeo (up to acregmax/acdirmax), a failure resets it to
-	 * acregmin/acdirmin.
-	 *
-	 * We need to revalidate the cached attrs for this inode if
-	 *
-	 *	jiffies - read_cache_jiffies >= attrtimeo
-	 *
-	 * Please note the comparison is greater than or equal
-	 * so that zero timeout values can be specified.
-	 */
-	unsigned long		read_cache_jiffies;
-	unsigned long		attrtimeo;
-	unsigned long		attrtimeo_timestamp;
-
-	unsigned long		attr_gencount;
-	/* "Generation counter" for the attribute cache. This is
-	 * bumped whenever we update the metadata on the
-	 * server.
-	 */
-	unsigned long		cache_change_attribute;
-
-	struct rb_root		access_cache;
-	struct list_head	access_cache_entry_lru;
-	struct list_head	access_cache_inode_lru;
-#ifdef CONFIG_NFS_V3_ACL
-	struct posix_acl	*acl_access;
-	struct posix_acl	*acl_default;
-#endif
-
-	/*
-	 * This is the cookie verifier used for NFSv3 readdir
-	 * operations
-	 */
-	__be32			cookieverf[2];
-
-	unsigned long		npages;
-	unsigned long		ncommit;
-	struct list_head	commit_list;
-
-	/* Open contexts for shared mmap writes */
-	struct list_head	open_files;
-
-	/* Number of in-flight sillydelete RPC calls */
-	atomic_t		silly_count;
-	/* List of deferred sillydelete requests */
-	struct hlist_head	silly_list;
-	wait_queue_head_t	waitqueue;
-
-#ifdef CONFIG_NFS_V4
-	struct nfs4_cached_acl	*nfs4_acl;
-        /* NFSv4 state */
-	struct list_head	open_states;
-	struct nfs_delegation __rcu *delegation;
-	fmode_t			 delegation_state;
-	struct rw_semaphore	rwsem;
-
-	/* pNFS layout information */
-	struct pnfs_layout_hdr *layout;
-	atomic_t		commits_outstanding;
-#endif /* CONFIG_NFS_V4*/
-#ifdef CONFIG_NFS_FSCACHE
-	struct fscache_cookie	*fscache;
-#endif
-	struct inode		vfs_inode;
-};
-
-/*
- * Cache validity bit flags
- */
-#define NFS_INO_INVALID_ATTR	0x0001		/* cached attrs are invalid */
-#define NFS_INO_INVALID_DATA	0x0002		/* cached data is invalid */
-#define NFS_INO_INVALID_ATIME	0x0004		/* cached atime is invalid */
-#define NFS_INO_INVALID_ACCESS	0x0008		/* cached access cred invalid */
-#define NFS_INO_INVALID_ACL	0x0010		/* cached acls are invalid */
-#define NFS_INO_REVAL_PAGECACHE	0x0020		/* must revalidate pagecache */
-#define NFS_INO_REVAL_FORCED	0x0040		/* force revalidation ignoring a delegation */
-
-/*
- * Bit offsets in flags field
- */
-#define NFS_INO_ADVISE_RDPLUS	(0)		/* advise readdirplus */
-#define NFS_INO_STALE		(1)		/* possible stale inode */
-#define NFS_INO_ACL_LRU_SET	(2)		/* Inode is on the LRU list */
-#define NFS_INO_FLUSHING	(4)		/* inode is flushing out data */
-#define NFS_INO_FSCACHE		(5)		/* inode can be cached by FS-Cache */
-#define NFS_INO_FSCACHE_LOCK	(6)		/* FS-Cache cookie management lock */
-#define NFS_INO_COMMIT		(7)		/* inode is committing unstable writes */
-#define NFS_INO_PNFS_COMMIT	(8)		/* use pnfs code for commit */
-#define NFS_INO_LAYOUTCOMMIT	(9)		/* layoutcommit required */
-#define NFS_INO_LAYOUTCOMMITTING (10)		/* layoutcommit inflight */
-
-static inline struct nfs_inode *NFS_I(const struct inode *inode)
-{
-	return container_of(inode, struct nfs_inode, vfs_inode);
-}
-
-static inline struct nfs_server *NFS_SB(const struct super_block *s)
-{
-	return (struct nfs_server *)(s->s_fs_info);
-}
-
-static inline struct nfs_fh *NFS_FH(const struct inode *inode)
-{
-	return &NFS_I(inode)->fh;
-}
-
-static inline struct nfs_server *NFS_SERVER(const struct inode *inode)
-{
-	return NFS_SB(inode->i_sb);
-}
-
-static inline struct rpc_clnt *NFS_CLIENT(const struct inode *inode)
-{
-	return NFS_SERVER(inode)->client;
-}
-
-static inline const struct nfs_rpc_ops *NFS_PROTO(const struct inode *inode)
-{
-	return NFS_SERVER(inode)->nfs_client->rpc_ops;
-}
-
-static inline __be32 *NFS_COOKIEVERF(const struct inode *inode)
-{
-	return NFS_I(inode)->cookieverf;
-}
-
-static inline unsigned NFS_MINATTRTIMEO(const struct inode *inode)
-{
-	struct nfs_server *nfss = NFS_SERVER(inode);
-	return S_ISDIR(inode->i_mode) ? nfss->acdirmin : nfss->acregmin;
-}
-
-static inline unsigned NFS_MAXATTRTIMEO(const struct inode *inode)
-{
-	struct nfs_server *nfss = NFS_SERVER(inode);
-	return S_ISDIR(inode->i_mode) ? nfss->acdirmax : nfss->acregmax;
-}
-
-static inline int NFS_STALE(const struct inode *inode)
-{
-	return test_bit(NFS_INO_STALE, &NFS_I(inode)->flags);
-}
-
-static inline int NFS_FSCACHE(const struct inode *inode)
-{
-	return test_bit(NFS_INO_FSCACHE, &NFS_I(inode)->flags);
-}
-
-static inline __u64 NFS_FILEID(const struct inode *inode)
-{
-	return NFS_I(inode)->fileid;
-}
-
-static inline void set_nfs_fileid(struct inode *inode, __u64 fileid)
-{
-	NFS_I(inode)->fileid = fileid;
-}
-
-static inline void nfs_mark_for_revalidate(struct inode *inode)
-{
-	struct nfs_inode *nfsi = NFS_I(inode);
-
-	spin_lock(&inode->i_lock);
-	nfsi->cache_validity |= NFS_INO_INVALID_ATTR|NFS_INO_INVALID_ACCESS;
-	if (S_ISDIR(inode->i_mode))
-		nfsi->cache_validity |= NFS_INO_REVAL_PAGECACHE|NFS_INO_INVALID_DATA;
-	spin_unlock(&inode->i_lock);
-}
-
-static inline int nfs_server_capable(struct inode *inode, int cap)
-{
-	return NFS_SERVER(inode)->caps & cap;
-}
-
-static inline int NFS_USE_READDIRPLUS(struct inode *inode)
-{
-	return test_bit(NFS_INO_ADVISE_RDPLUS, &NFS_I(inode)->flags);
-}
-
-static inline void nfs_set_verifier(struct dentry * dentry, unsigned long verf)
-{
-	dentry->d_time = verf;
-}
-
-/**
- * nfs_save_change_attribute - Returns the inode attribute change cookie
- * @dir - pointer to parent directory inode
- * The "change attribute" is updated every time we finish an operation
- * that will result in a metadata change on the server.
- */
-static inline unsigned long nfs_save_change_attribute(struct inode *dir)
-{
-	return NFS_I(dir)->cache_change_attribute;
-}
-
-/**
- * nfs_verify_change_attribute - Detects NFS remote directory changes
- * @dir - pointer to parent directory inode
- * @chattr - previously saved change attribute
- * Return "false" if the verifiers doesn't match the change attribute.
- * This would usually indicate that the directory contents have changed on
- * the server, and that any dentries need revalidating.
- */
-static inline int nfs_verify_change_attribute(struct inode *dir, unsigned long chattr)
-{
-	return chattr == NFS_I(dir)->cache_change_attribute;
-}
-
-/*
- * linux/fs/nfs/inode.c
- */
-extern int nfs_sync_mapping(struct address_space *mapping);
-extern void nfs_zap_mapping(struct inode *inode, struct address_space *mapping);
-extern void nfs_zap_caches(struct inode *);
-extern void nfs_invalidate_atime(struct inode *);
-extern struct inode *nfs_fhget(struct super_block *, struct nfs_fh *,
-				struct nfs_fattr *);
-extern int nfs_refresh_inode(struct inode *, struct nfs_fattr *);
-extern int nfs_post_op_update_inode(struct inode *inode, struct nfs_fattr *fattr);
-extern int nfs_post_op_update_inode_force_wcc(struct inode *inode, struct nfs_fattr *fattr);
-extern int nfs_getattr(struct vfsmount *, struct dentry *, struct kstat *);
-extern int nfs_permission(struct inode *, int);
-extern int nfs_open(struct inode *, struct file *);
-extern int nfs_release(struct inode *, struct file *);
-extern int nfs_attribute_timeout(struct inode *inode);
-extern int nfs_revalidate_inode(struct nfs_server *server, struct inode *inode);
-extern int __nfs_revalidate_inode(struct nfs_server *, struct inode *);
-extern int nfs_revalidate_mapping(struct inode *inode, struct address_space *mapping);
-extern int nfs_setattr(struct dentry *, struct iattr *);
-extern void nfs_setattr_update_inode(struct inode *inode, struct iattr *attr);
-extern struct nfs_open_context *get_nfs_open_context(struct nfs_open_context *ctx);
-extern void put_nfs_open_context(struct nfs_open_context *ctx);
-extern struct nfs_open_context *nfs_find_open_context(struct inode *inode, struct rpc_cred *cred, fmode_t mode);
-extern struct nfs_open_context *alloc_nfs_open_context(struct dentry *dentry, fmode_t f_mode);
-extern void nfs_file_set_open_context(struct file *filp, struct nfs_open_context *ctx);
-extern struct nfs_lock_context *nfs_get_lock_context(struct nfs_open_context *ctx);
-extern void nfs_put_lock_context(struct nfs_lock_context *l_ctx);
-extern u64 nfs_compat_user_ino64(u64 fileid);
-extern void nfs_fattr_init(struct nfs_fattr *fattr);
-extern unsigned long nfs_inc_attr_generation_counter(void);
-
-extern struct nfs_fattr *nfs_alloc_fattr(void);
-
-static inline void nfs_free_fattr(const struct nfs_fattr *fattr)
-{
-	kfree(fattr);
-}
-
-extern struct nfs_fh *nfs_alloc_fhandle(void);
-
-static inline void nfs_free_fhandle(const struct nfs_fh *fh)
-{
-	kfree(fh);
-}
-
-#ifdef NFS_DEBUG
-extern u32 _nfs_display_fhandle_hash(const struct nfs_fh *fh);
-static inline u32 nfs_display_fhandle_hash(const struct nfs_fh *fh)
-{
-	return _nfs_display_fhandle_hash(fh);
-}
-extern void _nfs_display_fhandle(const struct nfs_fh *fh, const char *caption);
-#define nfs_display_fhandle(fh, caption)			\
-	do {							\
-		if (unlikely(nfs_debug & NFSDBG_FACILITY))	\
-			_nfs_display_fhandle(fh, caption);	\
-	} while (0)
-#else
-static inline u32 nfs_display_fhandle_hash(const struct nfs_fh *fh)
-{
-	return 0;
-}
-static inline void nfs_display_fhandle(const struct nfs_fh *fh,
-				       const char *caption)
-{
-}
-#endif
-
-/*
- * linux/fs/nfs/nfsroot.c
- */
-extern int  nfs_root_data(char **root_device, char **root_data); /*__init*/
-/* linux/net/ipv4/ipconfig.c: trims ip addr off front of name, too. */
-extern __be32 root_nfs_parse_addr(char *name); /*__init*/
-
-/*
- * linux/fs/nfs/file.c
- */
-extern const struct inode_operations nfs_file_inode_operations;
-#ifdef CONFIG_NFS_V3
-extern const struct inode_operations nfs3_file_inode_operations;
-#endif /* CONFIG_NFS_V3 */
-extern const struct file_operations nfs_file_operations;
-#ifdef CONFIG_NFS_V4
-extern const struct file_operations nfs4_file_operations;
-#endif /* CONFIG_NFS_V4 */
-extern const struct address_space_operations nfs_file_aops;
-extern const struct address_space_operations nfs_dir_aops;
-
-static inline struct nfs_open_context *nfs_file_open_context(struct file *filp)
-{
-	return filp->private_data;
-}
-
-static inline struct rpc_cred *nfs_file_cred(struct file *file)
-{
-	if (file != NULL) {
-		struct nfs_open_context *ctx =
-			nfs_file_open_context(file);
-		if (ctx)
-			return ctx->cred;
-	}
-	return NULL;
-}
-
-/*
- * linux/fs/nfs/xattr.c
- */
-#ifdef CONFIG_NFS_V3_ACL
-extern ssize_t nfs3_listxattr(struct dentry *, char *, size_t);
-extern ssize_t nfs3_getxattr(struct dentry *, const char *, void *, size_t);
-extern int nfs3_setxattr(struct dentry *, const char *,
-			const void *, size_t, int);
-extern int nfs3_removexattr (struct dentry *, const char *name);
-#else
-# define nfs3_listxattr NULL
-# define nfs3_getxattr NULL
-# define nfs3_setxattr NULL
-# define nfs3_removexattr NULL
-#endif
-
-/*
- * linux/fs/nfs/direct.c
- */
-extern ssize_t nfs_direct_IO(int, struct kiocb *, const struct iovec *, loff_t,
-			unsigned long);
-extern ssize_t nfs_file_direct_read(struct kiocb *iocb,
-			const struct iovec *iov, unsigned long nr_segs,
-			loff_t pos);
-extern ssize_t nfs_file_direct_write(struct kiocb *iocb,
-			const struct iovec *iov, unsigned long nr_segs,
-			loff_t pos);
-
-/*
- * linux/fs/nfs/dir.c
- */
-extern const struct inode_operations nfs_dir_inode_operations;
-#ifdef CONFIG_NFS_V3
-extern const struct inode_operations nfs3_dir_inode_operations;
-#endif /* CONFIG_NFS_V3 */
-extern const struct file_operations nfs_dir_operations;
-extern const struct dentry_operations nfs_dentry_operations;
-
-extern void nfs_force_lookup_revalidate(struct inode *dir);
-extern int nfs_instantiate(struct dentry *dentry, struct nfs_fh *fh, struct nfs_fattr *fattr);
-extern int nfs_may_open(struct inode *inode, struct rpc_cred *cred, int openflags);
-extern void nfs_access_zap_cache(struct inode *inode);
-
-/*
- * linux/fs/nfs/symlink.c
- */
-extern const struct inode_operations nfs_symlink_inode_operations;
-
-/*
- * linux/fs/nfs/sysctl.c
- */
-#ifdef CONFIG_SYSCTL
-extern int nfs_register_sysctl(void);
-extern void nfs_unregister_sysctl(void);
-#else
-#define nfs_register_sysctl() 0
-#define nfs_unregister_sysctl() do { } while(0)
-#endif
-
-/*
- * linux/fs/nfs/namespace.c
- */
-extern const struct inode_operations nfs_mountpoint_inode_operations;
-extern const struct inode_operations nfs_referral_inode_operations;
-extern int nfs_mountpoint_expiry_timeout;
-extern void nfs_release_automount_timer(void);
-
-/*
- * linux/fs/nfs/unlink.c
- */
-extern void nfs_complete_unlink(struct dentry *dentry, struct inode *);
-extern void nfs_block_sillyrename(struct dentry *dentry);
-extern void nfs_unblock_sillyrename(struct dentry *dentry);
-extern int  nfs_sillyrename(struct inode *dir, struct dentry *dentry);
-
-/*
- * linux/fs/nfs/write.c
- */
-extern int  nfs_congestion_kb;
-extern int  nfs_writepage(struct page *page, struct writeback_control *wbc);
-extern int  nfs_writepages(struct address_space *, struct writeback_control *);
-extern int  nfs_flush_incompatible(struct file *file, struct page *page);
-extern int  nfs_updatepage(struct file *, struct page *, unsigned int, unsigned int);
-extern void nfs_writeback_done(struct rpc_task *, struct nfs_write_data *);
-
-/*
- * Try to write back everything synchronously (but check the
- * return value!)
- */
-extern int nfs_wb_all(struct inode *inode);
-extern int nfs_wb_page(struct inode *inode, struct page* page);
-extern int nfs_wb_page_cancel(struct inode *inode, struct page* page);
-#if defined(CONFIG_NFS_V3) || defined(CONFIG_NFS_V4)
-extern int  nfs_commit_inode(struct inode *, int);
-extern struct nfs_write_data *nfs_commitdata_alloc(void);
-extern void nfs_commit_free(struct nfs_write_data *wdata);
-#else
-static inline int
-nfs_commit_inode(struct inode *inode, int how)
-{
-	return 0;
-}
-#endif
-
-static inline int
-nfs_have_writebacks(struct inode *inode)
-{
-	return NFS_I(inode)->npages != 0;
-}
-
-/*
- * Allocate nfs_write_data structures
- */
-extern struct nfs_write_data *nfs_writedata_alloc(unsigned int npages);
-extern void nfs_writedata_free(struct nfs_write_data *);
-
-/*
- * linux/fs/nfs/read.c
- */
-extern int  nfs_readpage(struct file *, struct page *);
-extern int  nfs_readpages(struct file *, struct address_space *,
-		struct list_head *, unsigned);
-extern int  nfs_readpage_result(struct rpc_task *, struct nfs_read_data *);
-extern int  nfs_readpage_async(struct nfs_open_context *, struct inode *,
-			       struct page *);
-
-/*
- * Allocate nfs_read_data structures
- */
-extern struct nfs_read_data *nfs_readdata_alloc(unsigned int npages);
-extern void nfs_readdata_free(struct nfs_read_data *);
-
-/*
- * linux/fs/nfs3proc.c
- */
-#ifdef CONFIG_NFS_V3_ACL
-extern struct posix_acl *nfs3_proc_getacl(struct inode *inode, int type);
-extern int nfs3_proc_setacl(struct inode *inode, int type,
-			    struct posix_acl *acl);
-extern int nfs3_proc_set_default_acl(struct inode *dir, struct inode *inode,
-		umode_t mode);
-extern void nfs3_forget_cached_acls(struct inode *inode);
-#else
-static inline int nfs3_proc_set_default_acl(struct inode *dir,
-					    struct inode *inode,
-					    umode_t mode)
-{
-	return 0;
-}
-
-static inline void nfs3_forget_cached_acls(struct inode *inode)
-{
-}
-#endif /* CONFIG_NFS_V3_ACL */
-
-/*
- * inline functions
- */
-
-static inline loff_t nfs_size_to_loff_t(__u64 size)
-{
-	if (size > (__u64) OFFSET_MAX - 1)
-		return OFFSET_MAX - 1;
-	return (loff_t) size;
-}
-
-static inline ino_t
-nfs_fileid_to_ino_t(u64 fileid)
-{
-	ino_t ino = (ino_t) fileid;
-	if (sizeof(ino_t) < sizeof(u64))
-		ino ^= fileid >> (sizeof(u64)-sizeof(ino_t)) * 8;
-	return ino;
-}
-
-#define NFS_JUKEBOX_RETRY_TIME (5 * HZ)
-
-#endif /* __KERNEL__ */
-
-/*
- * NFS debug flags
- */
-#define NFSDBG_VFS		0x0001
-#define NFSDBG_DIRCACHE		0x0002
-#define NFSDBG_LOOKUPCACHE	0x0004
-#define NFSDBG_PAGECACHE	0x0008
-#define NFSDBG_PROC		0x0010
-#define NFSDBG_XDR		0x0020
-#define NFSDBG_FILE		0x0040
-#define NFSDBG_ROOT		0x0080
-#define NFSDBG_CALLBACK		0x0100
-#define NFSDBG_CLIENT		0x0200
-#define NFSDBG_MOUNT		0x0400
-#define NFSDBG_FSCACHE		0x0800
-#define NFSDBG_PNFS		0x1000
-#define NFSDBG_PNFS_LD		0x2000
-#define NFSDBG_ALL		0xFFFF
-
-#ifdef __KERNEL__
-
-# undef ifdebug
-# ifdef NFS_DEBUG
-#  define ifdebug(fac)		if (unlikely(nfs_debug & NFSDBG_##fac))
-#  define NFS_IFDEBUG(x)	x
-# else
-#  define ifdebug(fac)		if (0)
-#  define NFS_IFDEBUG(x)
-# endif
-#endif /* __KERNEL */
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/nfs_fs_i.h b/ANDROID_3.4.5/include/linux/nfs_fs_i.h
deleted file mode 100644
index a5c50d97..00000000
--- a/ANDROID_3.4.5/include/linux/nfs_fs_i.h
+++ /dev/null
@@ -1,20 +0,0 @@
-#ifndef _NFS_FS_I
-#define _NFS_FS_I
-
-struct nlm_lockowner;
-
-/*
- * NFS lock info
- */
-struct nfs_lock_info {
-	u32		state;
-	struct nlm_lockowner *owner;
-	struct list_head list;
-};
-
-struct nfs4_lock_state;
-struct nfs4_lock_info {
-	struct nfs4_lock_state *owner;
-};
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/nfs_fs_sb.h b/ANDROID_3.4.5/include/linux/nfs_fs_sb.h
deleted file mode 100644
index 7073fc74..00000000
--- a/ANDROID_3.4.5/include/linux/nfs_fs_sb.h
+++ /dev/null
@@ -1,243 +0,0 @@
-#ifndef _NFS_FS_SB
-#define _NFS_FS_SB
-
-#include <linux/list.h>
-#include <linux/backing-dev.h>
-#include <linux/idr.h>
-#include <linux/wait.h>
-#include <linux/nfs_xdr.h>
-#include <linux/sunrpc/xprt.h>
-
-#include <linux/atomic.h>
-
-struct nfs4_session;
-struct nfs_iostats;
-struct nlm_host;
-struct nfs4_sequence_args;
-struct nfs4_sequence_res;
-struct nfs_server;
-struct nfs4_minor_version_ops;
-struct server_scope;
-struct nfs41_impl_id;
-
-/*
- * The nfs_client identifies our client state to the server.
- */
-struct nfs_client {
-	atomic_t		cl_count;
-	int			cl_cons_state;	/* current construction state (-ve: init error) */
-#define NFS_CS_READY		0		/* ready to be used */
-#define NFS_CS_INITING		1		/* busy initialising */
-#define NFS_CS_SESSION_INITING	2		/* busy initialising  session */
-	unsigned long		cl_res_state;	/* NFS resources state */
-#define NFS_CS_CALLBACK		1		/* - callback started */
-#define NFS_CS_IDMAP		2		/* - idmap started */
-#define NFS_CS_RENEWD		3		/* - renewd started */
-#define NFS_CS_STOP_RENEW	4		/* no more state to renew */
-#define NFS_CS_CHECK_LEASE_TIME	5		/* need to check lease time */
-	struct sockaddr_storage	cl_addr;	/* server identifier */
-	size_t			cl_addrlen;
-	char *			cl_hostname;	/* hostname of server */
-	struct list_head	cl_share_link;	/* link in global client list */
-	struct list_head	cl_superblocks;	/* List of nfs_server structs */
-
-	struct rpc_clnt *	cl_rpcclient;
-	const struct nfs_rpc_ops *rpc_ops;	/* NFS protocol vector */
-	int			cl_proto;	/* Network transport protocol */
-
-	u32			cl_minorversion;/* NFSv4 minorversion */
-	struct rpc_cred		*cl_machine_cred;
-
-#ifdef CONFIG_NFS_V4
-	u64			cl_clientid;	/* constant */
-	nfs4_verifier		cl_confirm;	/* Clientid verifier */
-	unsigned long		cl_state;
-
-	spinlock_t		cl_lock;
-
-	unsigned long		cl_lease_time;
-	unsigned long		cl_last_renewal;
-	struct delayed_work	cl_renewd;
-
-	struct rpc_wait_queue	cl_rpcwaitq;
-
-	/* used for the setclientid verifier */
-	struct timespec		cl_boot_time;
-
-	/* idmapper */
-	struct idmap *		cl_idmap;
-
-	/* Our own IP address, as a null-terminated string.
-	 * This is used to generate the clientid, and the callback address.
-	 */
-	char			cl_ipaddr[48];
-	unsigned char		cl_id_uniquifier;
-	u32			cl_cb_ident;	/* v4.0 callback identifier */
-	const struct nfs4_minor_version_ops *cl_mvops;
-
-	/* The sequence id to use for the next CREATE_SESSION */
-	u32			cl_seqid;
-	/* The flags used for obtaining the clientid during EXCHANGE_ID */
-	u32			cl_exchange_flags;
-	struct nfs4_session	*cl_session; 	/* sharred session */
-#endif /* CONFIG_NFS_V4 */
-
-#ifdef CONFIG_NFS_FSCACHE
-	struct fscache_cookie	*fscache;	/* client index cache cookie */
-#endif
-
-	struct server_scope	*server_scope;	/* from exchange_id */
-	struct nfs41_impl_id	*impl_id;	/* from exchange_id */
-	struct net		*net;
-};
-
-/*
- * NFS client parameters stored in the superblock.
- */
-struct nfs_server {
-	struct nfs_client *	nfs_client;	/* shared client and NFS4 state */
-	struct list_head	client_link;	/* List of other nfs_server structs
-						 * that share the same client
-						 */
-	struct list_head	master_link;	/* link in master servers list */
-	struct rpc_clnt *	client;		/* RPC client handle */
-	struct rpc_clnt *	client_acl;	/* ACL RPC client handle */
-	struct nlm_host		*nlm_host;	/* NLM client handle */
-	struct nfs_iostats __percpu *io_stats;	/* I/O statistics */
-	struct backing_dev_info	backing_dev_info;
-	atomic_long_t		writeback;	/* number of writeback pages */
-	int			flags;		/* various flags */
-	unsigned int		caps;		/* server capabilities */
-	unsigned int		rsize;		/* read size */
-	unsigned int		rpages;		/* read size (in pages) */
-	unsigned int		wsize;		/* write size */
-	unsigned int		wpages;		/* write size (in pages) */
-	unsigned int		wtmult;		/* server disk block size */
-	unsigned int		dtsize;		/* readdir size */
-	unsigned short		port;		/* "port=" setting */
-	unsigned int		bsize;		/* server block size */
-	unsigned int		acregmin;	/* attr cache timeouts */
-	unsigned int		acregmax;
-	unsigned int		acdirmin;
-	unsigned int		acdirmax;
-	unsigned int		namelen;
-	unsigned int		options;	/* extra options enabled by mount */
-#define NFS_OPTION_FSCACHE	0x00000001	/* - local caching enabled */
-
-	struct nfs_fsid		fsid;
-	__u64			maxfilesize;	/* maximum file size */
-	struct timespec		time_delta;	/* smallest time granularity */
-	unsigned long		mount_time;	/* when this fs was mounted */
-	dev_t			s_dev;		/* superblock dev numbers */
-
-#ifdef CONFIG_NFS_FSCACHE
-	struct nfs_fscache_key	*fscache_key;	/* unique key for superblock */
-	struct fscache_cookie	*fscache;	/* superblock cookie */
-#endif
-
-	u32			pnfs_blksize;	/* layout_blksize attr */
-#ifdef CONFIG_NFS_V4
-	u32			attr_bitmask[3];/* V4 bitmask representing the set
-						   of attributes supported on this
-						   filesystem */
-	u32			cache_consistency_bitmask[2];
-						/* V4 bitmask representing the subset
-						   of change attribute, size, ctime
-						   and mtime attributes supported by
-						   the server */
-	u32			acl_bitmask;	/* V4 bitmask representing the ACEs
-						   that are supported on this
-						   filesystem */
-	u32			fh_expire_type;	/* V4 bitmask representing file
-						   handle volatility type for
-						   this filesystem */
-	struct pnfs_layoutdriver_type  *pnfs_curr_ld; /* Active layout driver */
-	struct rpc_wait_queue	roc_rpcwaitq;
-	void			*pnfs_ld_data;	/* per mount point data */
-
-	/* the following fields are protected by nfs_client->cl_lock */
-	struct rb_root		state_owners;
-#endif
-	struct ida		openowner_id;
-	struct ida		lockowner_id;
-	struct list_head	state_owners_lru;
-	struct list_head	layouts;
-	struct list_head	delegations;
-	void (*destroy)(struct nfs_server *);
-
-	atomic_t active; /* Keep trace of any activity to this server */
-
-	/* mountd-related mount options */
-	struct sockaddr_storage	mountd_address;
-	size_t			mountd_addrlen;
-	u32			mountd_version;
-	unsigned short		mountd_port;
-	unsigned short		mountd_protocol;
-};
-
-/* Server capabilities */
-#define NFS_CAP_READDIRPLUS	(1U << 0)
-#define NFS_CAP_HARDLINKS	(1U << 1)
-#define NFS_CAP_SYMLINKS	(1U << 2)
-#define NFS_CAP_ACLS		(1U << 3)
-#define NFS_CAP_ATOMIC_OPEN	(1U << 4)
-#define NFS_CAP_CHANGE_ATTR	(1U << 5)
-#define NFS_CAP_FILEID		(1U << 6)
-#define NFS_CAP_MODE		(1U << 7)
-#define NFS_CAP_NLINK		(1U << 8)
-#define NFS_CAP_OWNER		(1U << 9)
-#define NFS_CAP_OWNER_GROUP	(1U << 10)
-#define NFS_CAP_ATIME		(1U << 11)
-#define NFS_CAP_CTIME		(1U << 12)
-#define NFS_CAP_MTIME		(1U << 13)
-#define NFS_CAP_POSIX_LOCK	(1U << 14)
-#define NFS_CAP_UIDGID_NOMAP	(1U << 15)
-
-
-/* maximum number of slots to use */
-#define NFS4_DEF_SLOT_TABLE_SIZE (16U)
-#define NFS4_MAX_SLOT_TABLE (256U)
-#define NFS4_NO_SLOT ((u32)-1)
-
-#if defined(CONFIG_NFS_V4)
-
-/* Sessions */
-#define SLOT_TABLE_SZ DIV_ROUND_UP(NFS4_MAX_SLOT_TABLE, 8*sizeof(long))
-struct nfs4_slot_table {
-	struct nfs4_slot *slots;		/* seqid per slot */
-	unsigned long   used_slots[SLOT_TABLE_SZ]; /* used/unused bitmap */
-	spinlock_t	slot_tbl_lock;
-	struct rpc_wait_queue	slot_tbl_waitq;	/* allocators may wait here */
-	u32		max_slots;		/* # slots in table */
-	u32		highest_used_slotid;	/* sent to server on each SEQ.
-						 * op for dynamic resizing */
-	u32		target_max_slots;	/* Set by CB_RECALL_SLOT as
-						 * the new max_slots */
-	struct completion complete;
-};
-
-static inline int slot_idx(struct nfs4_slot_table *tbl, struct nfs4_slot *sp)
-{
-	return sp - tbl->slots;
-}
-
-/*
- * Session related parameters
- */
-struct nfs4_session {
-	struct nfs4_sessionid		sess_id;
-	u32				flags;
-	unsigned long			session_state;
-	u32				hash_alg;
-	u32				ssv_len;
-
-	/* The fore and back channel */
-	struct nfs4_channel_attrs	fc_attrs;
-	struct nfs4_slot_table		fc_slot_table;
-	struct nfs4_channel_attrs	bc_attrs;
-	struct nfs4_slot_table		bc_slot_table;
-	struct nfs_client		*clp;
-};
-
-#endif /* CONFIG_NFS_V4 */
-#endif
diff --git a/ANDROID_3.4.5/include/linux/nfs_idmap.h b/ANDROID_3.4.5/include/linux/nfs_idmap.h
deleted file mode 100644
index 7eed2012..00000000
--- a/ANDROID_3.4.5/include/linux/nfs_idmap.h
+++ /dev/null
@@ -1,102 +0,0 @@
-/*
- * include/linux/nfs_idmap.h
- *
- *  UID and GID to name mapping for clients.
- *
- *  Copyright (c) 2002 The Regents of the University of Michigan.
- *  All rights reserved.
- *
- *  Marius Aamodt Eriksen <marius@umich.edu>
- *
- *  Redistribution and use in source and binary forms, with or without
- *  modification, are permitted provided that the following conditions
- *  are met:
- *
- *  1. Redistributions of source code must retain the above copyright
- *     notice, this list of conditions and the following disclaimer.
- *  2. Redistributions in binary form must reproduce the above copyright
- *     notice, this list of conditions and the following disclaimer in the
- *     documentation and/or other materials provided with the distribution.
- *  3. Neither the name of the University nor the names of its
- *     contributors may be used to endorse or promote products derived
- *     from this software without specific prior written permission.
- *
- *  THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- *  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- *  DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- *  FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- *  CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- *  SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
- *  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
- *  LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
- *  NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- *  SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#ifndef NFS_IDMAP_H
-#define NFS_IDMAP_H
-
-#include <linux/types.h>
-
-/* XXX from bits/utmp.h  */
-#define IDMAP_NAMESZ  128
-
-#define IDMAP_TYPE_USER  0
-#define IDMAP_TYPE_GROUP 1
-
-#define IDMAP_CONV_IDTONAME 0
-#define IDMAP_CONV_NAMETOID 1
-
-#define IDMAP_STATUS_INVALIDMSG 0x01
-#define IDMAP_STATUS_AGAIN      0x02
-#define IDMAP_STATUS_LOOKUPFAIL 0x04
-#define IDMAP_STATUS_SUCCESS    0x08
-
-struct idmap_msg {
-	__u8  im_type;
-	__u8  im_conv;
-	char  im_name[IDMAP_NAMESZ];
-	__u32 im_id;
-	__u8  im_status;
-};
-
-#ifdef __KERNEL__
-
-/* Forward declaration to make this header independent of others */
-struct nfs_client;
-struct nfs_server;
-struct nfs_fattr;
-struct nfs4_string;
-
-#ifdef CONFIG_NFS_V4
-int nfs_idmap_init(void);
-void nfs_idmap_quit(void);
-#else
-static inline int nfs_idmap_init(void)
-{
-	return 0;
-}
-
-static inline void nfs_idmap_quit(void)
-{}
-#endif
-
-int nfs_idmap_new(struct nfs_client *);
-void nfs_idmap_delete(struct nfs_client *);
-
-void nfs_fattr_init_names(struct nfs_fattr *fattr,
-		struct nfs4_string *owner_name,
-		struct nfs4_string *group_name);
-void nfs_fattr_free_names(struct nfs_fattr *);
-void nfs_fattr_map_and_free_names(struct nfs_server *, struct nfs_fattr *);
-
-int nfs_map_name_to_uid(const struct nfs_server *, const char *, size_t, __u32 *);
-int nfs_map_group_to_gid(const struct nfs_server *, const char *, size_t, __u32 *);
-int nfs_map_uid_to_name(const struct nfs_server *, __u32, char *, size_t);
-int nfs_map_gid_to_group(const struct nfs_server *, __u32, char *, size_t);
-
-extern unsigned int nfs_idmap_cache_timeout;
-#endif /* __KERNEL__ */
-
-#endif /* NFS_IDMAP_H */
diff --git a/ANDROID_3.4.5/include/linux/nfs_iostat.h b/ANDROID_3.4.5/include/linux/nfs_iostat.h
deleted file mode 100644
index 9dcbbe9a..00000000
--- a/ANDROID_3.4.5/include/linux/nfs_iostat.h
+++ /dev/null
@@ -1,133 +0,0 @@
-/*
- *  User-space visible declarations for NFS client per-mount
- *  point statistics
- *
- *  Copyright (C) 2005, 2006 Chuck Lever <cel@netapp.com>
- *
- *  NFS client per-mount statistics provide information about the
- *  health of the NFS client and the health of each NFS mount point.
- *  Generally these are not for detailed problem diagnosis, but
- *  simply to indicate that there is a problem.
- *
- *  These counters are not meant to be human-readable, but are meant
- *  to be integrated into system monitoring tools such as "sar" and
- *  "iostat".  As such, the counters are sampled by the tools over
- *  time, and are never zeroed after a file system is mounted.
- *  Moving averages can be computed by the tools by taking the
- *  difference between two instantaneous samples  and dividing that
- *  by the time between the samples.
- */
-
-#ifndef _LINUX_NFS_IOSTAT
-#define _LINUX_NFS_IOSTAT
-
-#define NFS_IOSTAT_VERS		"1.1"
-
-/*
- * NFS byte counters
- *
- * 1.  SERVER - the number of payload bytes read from or written
- *     to the server by the NFS client via an NFS READ or WRITE
- *     request.
- *
- * 2.  NORMAL - the number of bytes read or written by applications
- *     via the read(2) and write(2) system call interfaces.
- *
- * 3.  DIRECT - the number of bytes read or written from files
- *     opened with the O_DIRECT flag.
- *
- * These counters give a view of the data throughput into and out
- * of the NFS client.  Comparing the number of bytes requested by
- * an application with the number of bytes the client requests from
- * the server can provide an indication of client efficiency
- * (per-op, cache hits, etc).
- *
- * These counters can also help characterize which access methods
- * are in use.  DIRECT by itself shows whether there is any O_DIRECT
- * traffic.  NORMAL + DIRECT shows how much data is going through
- * the system call interface.  A large amount of SERVER traffic
- * without much NORMAL or DIRECT traffic shows that applications
- * are using mapped files.
- *
- * NFS page counters
- *
- * These count the number of pages read or written via nfs_readpage(),
- * nfs_readpages(), or their write equivalents.
- *
- * NB: When adding new byte counters, please include the measured
- * units in the name of each byte counter to help users of this
- * interface determine what exactly is being counted.
- */
-enum nfs_stat_bytecounters {
-	NFSIOS_NORMALREADBYTES = 0,
-	NFSIOS_NORMALWRITTENBYTES,
-	NFSIOS_DIRECTREADBYTES,
-	NFSIOS_DIRECTWRITTENBYTES,
-	NFSIOS_SERVERREADBYTES,
-	NFSIOS_SERVERWRITTENBYTES,
-	NFSIOS_READPAGES,
-	NFSIOS_WRITEPAGES,
-	__NFSIOS_BYTESMAX,
-};
-
-/*
- * NFS event counters
- *
- * These counters provide a low-overhead way of monitoring client
- * activity without enabling NFS trace debugging.  The counters
- * show the rate at which VFS requests are made, and how often the
- * client invalidates its data and attribute caches.  This allows
- * system administrators to monitor such things as how close-to-open
- * is working, and answer questions such as "why are there so many
- * GETATTR requests on the wire?"
- *
- * They also count anamolous events such as short reads and writes,
- * silly renames due to close-after-delete, and operations that
- * change the size of a file (such operations can often be the
- * source of data corruption if applications aren't using file
- * locking properly).
- */
-enum nfs_stat_eventcounters {
-	NFSIOS_INODEREVALIDATE = 0,
-	NFSIOS_DENTRYREVALIDATE,
-	NFSIOS_DATAINVALIDATE,
-	NFSIOS_ATTRINVALIDATE,
-	NFSIOS_VFSOPEN,
-	NFSIOS_VFSLOOKUP,
-	NFSIOS_VFSACCESS,
-	NFSIOS_VFSUPDATEPAGE,
-	NFSIOS_VFSREADPAGE,
-	NFSIOS_VFSREADPAGES,
-	NFSIOS_VFSWRITEPAGE,
-	NFSIOS_VFSWRITEPAGES,
-	NFSIOS_VFSGETDENTS,
-	NFSIOS_VFSSETATTR,
-	NFSIOS_VFSFLUSH,
-	NFSIOS_VFSFSYNC,
-	NFSIOS_VFSLOCK,
-	NFSIOS_VFSRELEASE,
-	NFSIOS_CONGESTIONWAIT,
-	NFSIOS_SETATTRTRUNC,
-	NFSIOS_EXTENDWRITE,
-	NFSIOS_SILLYRENAME,
-	NFSIOS_SHORTREAD,
-	NFSIOS_SHORTWRITE,
-	NFSIOS_DELAY,
-	NFSIOS_PNFS_READ,
-	NFSIOS_PNFS_WRITE,
-	__NFSIOS_COUNTSMAX,
-};
-
-/*
- * NFS local caching servicing counters
- */
-enum nfs_stat_fscachecounters {
-	NFSIOS_FSCACHE_PAGES_READ_OK,
-	NFSIOS_FSCACHE_PAGES_READ_FAIL,
-	NFSIOS_FSCACHE_PAGES_WRITTEN_OK,
-	NFSIOS_FSCACHE_PAGES_WRITTEN_FAIL,
-	NFSIOS_FSCACHE_PAGES_UNCACHED,
-	__NFSIOS_FSCACHEMAX,
-};
-
-#endif	/* _LINUX_NFS_IOSTAT */
diff --git a/ANDROID_3.4.5/include/linux/nfs_mount.h b/ANDROID_3.4.5/include/linux/nfs_mount.h
deleted file mode 100644
index 576bddd7..00000000
--- a/ANDROID_3.4.5/include/linux/nfs_mount.h
+++ /dev/null
@@ -1,77 +0,0 @@
-#ifndef _LINUX_NFS_MOUNT_H
-#define _LINUX_NFS_MOUNT_H
-
-/*
- *  linux/include/linux/nfs_mount.h
- *
- *  Copyright (C) 1992  Rick Sladkey
- *
- *  structure passed from user-space to kernel-space during an nfs mount
- */
-#include <linux/in.h>
-#include <linux/nfs.h>
-#include <linux/nfs2.h>
-#include <linux/nfs3.h>
-
-/*
- * WARNING!  Do not delete or change the order of these fields.  If
- * a new field is required then add it to the end.  The version field
- * tracks which fields are present.  This will ensure some measure of
- * mount-to-kernel version compatibility.  Some of these aren't used yet
- * but here they are anyway.
- */
-#define NFS_MOUNT_VERSION	6
-#define NFS_MAX_CONTEXT_LEN	256
-
-struct nfs_mount_data {
-	int		version;		/* 1 */
-	int		fd;			/* 1 */
-	struct nfs2_fh	old_root;		/* 1 */
-	int		flags;			/* 1 */
-	int		rsize;			/* 1 */
-	int		wsize;			/* 1 */
-	int		timeo;			/* 1 */
-	int		retrans;		/* 1 */
-	int		acregmin;		/* 1 */
-	int		acregmax;		/* 1 */
-	int		acdirmin;		/* 1 */
-	int		acdirmax;		/* 1 */
-	struct sockaddr_in addr;		/* 1 */
-	char		hostname[NFS_MAXNAMLEN + 1];		/* 1 */
-	int		namlen;			/* 2 */
-	unsigned int	bsize;			/* 3 */
-	struct nfs3_fh	root;			/* 4 */
-	int		pseudoflavor;		/* 5 */
-	char		context[NFS_MAX_CONTEXT_LEN + 1];	/* 6 */
-};
-
-/* bits in the flags field visible to user space */
-
-#define NFS_MOUNT_SOFT		0x0001	/* 1 */
-#define NFS_MOUNT_INTR		0x0002	/* 1 */ /* now unused, but ABI */
-#define NFS_MOUNT_SECURE	0x0004	/* 1 */
-#define NFS_MOUNT_POSIX		0x0008	/* 1 */
-#define NFS_MOUNT_NOCTO		0x0010	/* 1 */
-#define NFS_MOUNT_NOAC		0x0020	/* 1 */
-#define NFS_MOUNT_TCP		0x0040	/* 2 */
-#define NFS_MOUNT_VER3		0x0080	/* 3 */
-#define NFS_MOUNT_KERBEROS	0x0100	/* 3 */
-#define NFS_MOUNT_NONLM		0x0200	/* 3 */
-#define NFS_MOUNT_BROKEN_SUID	0x0400	/* 4 */
-#define NFS_MOUNT_NOACL		0x0800	/* 4 */
-#define NFS_MOUNT_STRICTLOCK	0x1000	/* reserved for NFSv4 */
-#define NFS_MOUNT_SECFLAVOUR	0x2000	/* 5 */
-#define NFS_MOUNT_NORDIRPLUS	0x4000	/* 5 */
-#define NFS_MOUNT_UNSHARED	0x8000	/* 5 */
-#define NFS_MOUNT_FLAGMASK	0xFFFF
-
-/* The following are for internal use only */
-#define NFS_MOUNT_LOOKUP_CACHE_NONEG	0x10000
-#define NFS_MOUNT_LOOKUP_CACHE_NONE	0x20000
-#define NFS_MOUNT_NORESVPORT		0x40000
-#define NFS_MOUNT_LEGACY_INTERFACE	0x80000
-
-#define NFS_MOUNT_LOCAL_FLOCK	0x100000
-#define NFS_MOUNT_LOCAL_FCNTL	0x200000
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/nfs_page.h b/ANDROID_3.4.5/include/linux/nfs_page.h
deleted file mode 100644
index eac30d6b..00000000
--- a/ANDROID_3.4.5/include/linux/nfs_page.h
+++ /dev/null
@@ -1,154 +0,0 @@
-/*
- * linux/include/linux/nfs_page.h
- *
- * Copyright (C) 2000 Trond Myklebust
- *
- * NFS page cache wrapper.
- */
-
-#ifndef _LINUX_NFS_PAGE_H
-#define _LINUX_NFS_PAGE_H
-
-
-#include <linux/list.h>
-#include <linux/pagemap.h>
-#include <linux/wait.h>
-#include <linux/sunrpc/auth.h>
-#include <linux/nfs_xdr.h>
-
-#include <linux/kref.h>
-
-/*
- * Valid flags for a dirty buffer
- */
-enum {
-	PG_BUSY = 0,
-	PG_MAPPED,
-	PG_CLEAN,
-	PG_NEED_COMMIT,
-	PG_NEED_RESCHED,
-	PG_PARTIAL_READ_FAILED,
-	PG_COMMIT_TO_DS,
-};
-
-struct nfs_inode;
-struct nfs_page {
-	struct list_head	wb_list;	/* Defines state of page: */
-	struct page		*wb_page;	/* page to read in/write out */
-	struct nfs_open_context	*wb_context;	/* File state context info */
-	struct nfs_lock_context	*wb_lock_context;	/* lock context info */
-	atomic_t		wb_complete;	/* i/os we're waiting for */
-	pgoff_t			wb_index;	/* Offset >> PAGE_CACHE_SHIFT */
-	unsigned int		wb_offset,	/* Offset & ~PAGE_CACHE_MASK */
-				wb_pgbase,	/* Start of page data */
-				wb_bytes;	/* Length of request */
-	struct kref		wb_kref;	/* reference count */
-	unsigned long		wb_flags;
-	struct nfs_writeverf	wb_verf;	/* Commit cookie */
-};
-
-struct nfs_pageio_descriptor;
-struct nfs_pageio_ops {
-	void	(*pg_init)(struct nfs_pageio_descriptor *, struct nfs_page *);
-	bool	(*pg_test)(struct nfs_pageio_descriptor *, struct nfs_page *, struct nfs_page *);
-	int	(*pg_doio)(struct nfs_pageio_descriptor *);
-};
-
-struct nfs_pageio_descriptor {
-	struct list_head	pg_list;
-	unsigned long		pg_bytes_written;
-	size_t			pg_count;
-	size_t			pg_bsize;
-	unsigned int		pg_base;
-	unsigned char		pg_moreio : 1,
-				pg_recoalesce : 1;
-
-	struct inode		*pg_inode;
-	const struct nfs_pageio_ops *pg_ops;
-	int 			pg_ioflags;
-	int			pg_error;
-	const struct rpc_call_ops *pg_rpc_callops;
-	struct pnfs_layout_segment *pg_lseg;
-};
-
-#define NFS_WBACK_BUSY(req)	(test_bit(PG_BUSY,&(req)->wb_flags))
-
-extern	struct nfs_page *nfs_create_request(struct nfs_open_context *ctx,
-					    struct inode *inode,
-					    struct page *page,
-					    unsigned int offset,
-					    unsigned int count);
-extern	void nfs_release_request(struct nfs_page *req);
-
-
-extern	void nfs_pageio_init(struct nfs_pageio_descriptor *desc,
-			     struct inode *inode,
-			     const struct nfs_pageio_ops *pg_ops,
-			     size_t bsize,
-			     int how);
-extern	int nfs_pageio_add_request(struct nfs_pageio_descriptor *,
-				   struct nfs_page *);
-extern	void nfs_pageio_complete(struct nfs_pageio_descriptor *desc);
-extern	void nfs_pageio_cond_complete(struct nfs_pageio_descriptor *, pgoff_t);
-extern bool nfs_generic_pg_test(struct nfs_pageio_descriptor *desc,
-				struct nfs_page *prev,
-				struct nfs_page *req);
-extern  int nfs_wait_on_request(struct nfs_page *);
-extern	void nfs_unlock_request(struct nfs_page *req);
-
-/*
- * Lock the page of an asynchronous request without getting a new reference
- */
-static inline int
-nfs_lock_request_dontget(struct nfs_page *req)
-{
-	return !test_and_set_bit(PG_BUSY, &req->wb_flags);
-}
-
-static inline int
-nfs_lock_request(struct nfs_page *req)
-{
-	if (test_and_set_bit(PG_BUSY, &req->wb_flags))
-		return 0;
-	kref_get(&req->wb_kref);
-	return 1;
-}
-
-
-/**
- * nfs_list_add_request - Insert a request into a list
- * @req: request
- * @head: head of list into which to insert the request.
- */
-static inline void
-nfs_list_add_request(struct nfs_page *req, struct list_head *head)
-{
-	list_add_tail(&req->wb_list, head);
-}
-
-
-/**
- * nfs_list_remove_request - Remove a request from its wb_list
- * @req: request
- */
-static inline void
-nfs_list_remove_request(struct nfs_page *req)
-{
-	if (list_empty(&req->wb_list))
-		return;
-	list_del_init(&req->wb_list);
-}
-
-static inline struct nfs_page *
-nfs_list_entry(struct list_head *head)
-{
-	return list_entry(head, struct nfs_page, wb_list);
-}
-
-static inline
-loff_t req_offset(struct nfs_page *req)
-{
-	return (((loff_t)req->wb_index) << PAGE_CACHE_SHIFT) + req->wb_offset;
-}
-
-#endif /* _LINUX_NFS_PAGE_H */
diff --git a/ANDROID_3.4.5/include/linux/nfs_xdr.h b/ANDROID_3.4.5/include/linux/nfs_xdr.h
deleted file mode 100644
index 7ba3551a..00000000
--- a/ANDROID_3.4.5/include/linux/nfs_xdr.h
+++ /dev/null
@@ -1,1315 +0,0 @@
-#ifndef _LINUX_NFS_XDR_H
-#define _LINUX_NFS_XDR_H
-
-#include <linux/nfsacl.h>
-#include <linux/sunrpc/gss_api.h>
-
-/*
- * To change the maximum rsize and wsize supported by the NFS client, adjust
- * NFS_MAX_FILE_IO_SIZE.  64KB is a typical maximum, but some servers can
- * support a megabyte or more.  The default is left at 4096 bytes, which is
- * reasonable for NFS over UDP.
- */
-#define NFS_MAX_FILE_IO_SIZE	(1048576U)
-#define NFS_DEF_FILE_IO_SIZE	(4096U)
-#define NFS_MIN_FILE_IO_SIZE	(1024U)
-
-/* Forward declaration for NFS v3 */
-struct nfs4_secinfo_flavors;
-
-struct nfs4_string {
-	unsigned int len;
-	char *data;
-};
-
-struct nfs_fsid {
-	uint64_t		major;
-	uint64_t		minor;
-};
-
-/*
- * Helper for checking equality between 2 fsids.
- */
-static inline int nfs_fsid_equal(const struct nfs_fsid *a, const struct nfs_fsid *b)
-{
-	return a->major == b->major && a->minor == b->minor;
-}
-
-struct nfs_fattr {
-	unsigned int		valid;		/* which fields are valid */
-	umode_t			mode;
-	__u32			nlink;
-	__u32			uid;
-	__u32			gid;
-	dev_t			rdev;
-	__u64			size;
-	union {
-		struct {
-			__u32	blocksize;
-			__u32	blocks;
-		} nfs2;
-		struct {
-			__u64	used;
-		} nfs3;
-	} du;
-	struct nfs_fsid		fsid;
-	__u64			fileid;
-	__u64			mounted_on_fileid;
-	struct timespec		atime;
-	struct timespec		mtime;
-	struct timespec		ctime;
-	__u64			change_attr;	/* NFSv4 change attribute */
-	__u64			pre_change_attr;/* pre-op NFSv4 change attribute */
-	__u64			pre_size;	/* pre_op_attr.size	  */
-	struct timespec		pre_mtime;	/* pre_op_attr.mtime	  */
-	struct timespec		pre_ctime;	/* pre_op_attr.ctime	  */
-	unsigned long		time_start;
-	unsigned long		gencount;
-	struct nfs4_string	*owner_name;
-	struct nfs4_string	*group_name;
-};
-
-#define NFS_ATTR_FATTR_TYPE		(1U << 0)
-#define NFS_ATTR_FATTR_MODE		(1U << 1)
-#define NFS_ATTR_FATTR_NLINK		(1U << 2)
-#define NFS_ATTR_FATTR_OWNER		(1U << 3)
-#define NFS_ATTR_FATTR_GROUP		(1U << 4)
-#define NFS_ATTR_FATTR_RDEV		(1U << 5)
-#define NFS_ATTR_FATTR_SIZE		(1U << 6)
-#define NFS_ATTR_FATTR_PRESIZE		(1U << 7)
-#define NFS_ATTR_FATTR_BLOCKS_USED	(1U << 8)
-#define NFS_ATTR_FATTR_SPACE_USED	(1U << 9)
-#define NFS_ATTR_FATTR_FSID		(1U << 10)
-#define NFS_ATTR_FATTR_FILEID		(1U << 11)
-#define NFS_ATTR_FATTR_ATIME		(1U << 12)
-#define NFS_ATTR_FATTR_MTIME		(1U << 13)
-#define NFS_ATTR_FATTR_CTIME		(1U << 14)
-#define NFS_ATTR_FATTR_PREMTIME		(1U << 15)
-#define NFS_ATTR_FATTR_PRECTIME		(1U << 16)
-#define NFS_ATTR_FATTR_CHANGE		(1U << 17)
-#define NFS_ATTR_FATTR_PRECHANGE	(1U << 18)
-#define NFS_ATTR_FATTR_V4_LOCATIONS	(1U << 19)
-#define NFS_ATTR_FATTR_V4_REFERRAL	(1U << 20)
-#define NFS_ATTR_FATTR_MOUNTPOINT	(1U << 21)
-#define NFS_ATTR_FATTR_MOUNTED_ON_FILEID (1U << 22)
-#define NFS_ATTR_FATTR_OWNER_NAME	(1U << 23)
-#define NFS_ATTR_FATTR_GROUP_NAME	(1U << 24)
-
-#define NFS_ATTR_FATTR (NFS_ATTR_FATTR_TYPE \
-		| NFS_ATTR_FATTR_MODE \
-		| NFS_ATTR_FATTR_NLINK \
-		| NFS_ATTR_FATTR_OWNER \
-		| NFS_ATTR_FATTR_GROUP \
-		| NFS_ATTR_FATTR_RDEV \
-		| NFS_ATTR_FATTR_SIZE \
-		| NFS_ATTR_FATTR_FSID \
-		| NFS_ATTR_FATTR_FILEID \
-		| NFS_ATTR_FATTR_ATIME \
-		| NFS_ATTR_FATTR_MTIME \
-		| NFS_ATTR_FATTR_CTIME)
-#define NFS_ATTR_FATTR_V2 (NFS_ATTR_FATTR \
-		| NFS_ATTR_FATTR_BLOCKS_USED)
-#define NFS_ATTR_FATTR_V3 (NFS_ATTR_FATTR \
-		| NFS_ATTR_FATTR_SPACE_USED)
-#define NFS_ATTR_FATTR_V4 (NFS_ATTR_FATTR \
-		| NFS_ATTR_FATTR_SPACE_USED \
-		| NFS_ATTR_FATTR_CHANGE)
-
-/*
- * Info on the file system
- */
-struct nfs_fsinfo {
-	struct nfs_fattr	*fattr; /* Post-op attributes */
-	__u32			rtmax;	/* max.  read transfer size */
-	__u32			rtpref;	/* pref. read transfer size */
-	__u32			rtmult;	/* reads should be multiple of this */
-	__u32			wtmax;	/* max.  write transfer size */
-	__u32			wtpref;	/* pref. write transfer size */
-	__u32			wtmult;	/* writes should be multiple of this */
-	__u32			dtpref;	/* pref. readdir transfer size */
-	__u64			maxfilesize;
-	struct timespec		time_delta; /* server time granularity */
-	__u32			lease_time; /* in seconds */
-	__u32			layouttype; /* supported pnfs layout driver */
-	__u32			blksize; /* preferred pnfs io block size */
-};
-
-struct nfs_fsstat {
-	struct nfs_fattr	*fattr; /* Post-op attributes */
-	__u64			tbytes;	/* total size in bytes */
-	__u64			fbytes;	/* # of free bytes */
-	__u64			abytes;	/* # of bytes available to user */
-	__u64			tfiles;	/* # of files */
-	__u64			ffiles;	/* # of free files */
-	__u64			afiles;	/* # of files available to user */
-};
-
-struct nfs2_fsstat {
-	__u32			tsize;  /* Server transfer size */
-	__u32			bsize;  /* Filesystem block size */
-	__u32			blocks; /* No. of "bsize" blocks on filesystem */
-	__u32			bfree;  /* No. of free "bsize" blocks */
-	__u32			bavail; /* No. of available "bsize" blocks */
-};
-
-struct nfs_pathconf {
-	struct nfs_fattr	*fattr; /* Post-op attributes */
-	__u32			max_link; /* max # of hard links */
-	__u32			max_namelen; /* max name length */
-};
-
-struct nfs4_change_info {
-	u32			atomic;
-	u64			before;
-	u64			after;
-};
-
-struct nfs_seqid;
-
-/* nfs41 sessions channel attributes */
-struct nfs4_channel_attrs {
-	u32			max_rqst_sz;
-	u32			max_resp_sz;
-	u32			max_resp_sz_cached;
-	u32			max_ops;
-	u32			max_reqs;
-};
-
-/* nfs41 sessions slot seqid */
-struct nfs4_slot {
-	u32		 	seq_nr;
-};
-
-struct nfs4_sequence_args {
-	struct nfs4_session	*sa_session;
-	u32			sa_slotid;
-	u8			sa_cache_this;
-};
-
-struct nfs4_sequence_res {
-	struct nfs4_session	*sr_session;
-	struct nfs4_slot	*sr_slot;	/* slot used to send request */
-	int			sr_status;	/* sequence operation status */
-	unsigned long		sr_renewal_time;
-	u32			sr_status_flags;
-};
-
-struct nfs4_get_lease_time_args {
-	struct nfs4_sequence_args	la_seq_args;
-};
-
-struct nfs4_get_lease_time_res {
-	struct nfs_fsinfo	       *lr_fsinfo;
-	struct nfs4_sequence_res	lr_seq_res;
-};
-
-#define PNFS_LAYOUT_MAXSIZE 4096
-
-struct nfs4_layoutdriver_data {
-	struct page **pages;
-	__u32 pglen;
-	__u32 len;
-};
-
-struct pnfs_layout_range {
-	u32 iomode;
-	u64 offset;
-	u64 length;
-};
-
-struct nfs4_layoutget_args {
-	__u32 type;
-	struct pnfs_layout_range range;
-	__u64 minlength;
-	__u32 maxcount;
-	struct inode *inode;
-	struct nfs_open_context *ctx;
-	struct nfs4_sequence_args seq_args;
-	nfs4_stateid stateid;
-	struct nfs4_layoutdriver_data layout;
-};
-
-struct nfs4_layoutget_res {
-	__u32 return_on_close;
-	struct pnfs_layout_range range;
-	__u32 type;
-	nfs4_stateid stateid;
-	struct nfs4_sequence_res seq_res;
-	struct nfs4_layoutdriver_data *layoutp;
-};
-
-struct nfs4_layoutget {
-	struct nfs4_layoutget_args args;
-	struct nfs4_layoutget_res res;
-	struct pnfs_layout_segment **lsegpp;
-	gfp_t gfp_flags;
-};
-
-struct nfs4_getdevicelist_args {
-	const struct nfs_fh *fh;
-	u32 layoutclass;
-	struct nfs4_sequence_args seq_args;
-};
-
-struct nfs4_getdevicelist_res {
-	struct pnfs_devicelist *devlist;
-	struct nfs4_sequence_res seq_res;
-};
-
-struct nfs4_getdeviceinfo_args {
-	struct pnfs_device *pdev;
-	struct nfs4_sequence_args seq_args;
-};
-
-struct nfs4_getdeviceinfo_res {
-	struct pnfs_device *pdev;
-	struct nfs4_sequence_res seq_res;
-};
-
-struct nfs4_layoutcommit_args {
-	nfs4_stateid stateid;
-	__u64 lastbytewritten;
-	struct inode *inode;
-	const u32 *bitmask;
-	struct nfs4_sequence_args seq_args;
-};
-
-struct nfs4_layoutcommit_res {
-	struct nfs_fattr *fattr;
-	const struct nfs_server *server;
-	struct nfs4_sequence_res seq_res;
-	int status;
-};
-
-struct nfs4_layoutcommit_data {
-	struct rpc_task task;
-	struct nfs_fattr fattr;
-	struct list_head lseg_list;
-	struct rpc_cred *cred;
-	struct nfs4_layoutcommit_args args;
-	struct nfs4_layoutcommit_res res;
-};
-
-struct nfs4_layoutreturn_args {
-	struct pnfs_layout_hdr *layout;
-	struct inode *inode;
-	nfs4_stateid stateid;
-	__u32   layout_type;
-	struct nfs4_sequence_args seq_args;
-};
-
-struct nfs4_layoutreturn_res {
-	struct nfs4_sequence_res seq_res;
-	u32 lrs_present;
-	nfs4_stateid stateid;
-};
-
-struct nfs4_layoutreturn {
-	struct nfs4_layoutreturn_args args;
-	struct nfs4_layoutreturn_res res;
-	struct rpc_cred *cred;
-	struct nfs_client *clp;
-	int rpc_status;
-};
-
-struct stateowner_id {
-	__u64	create_time;
-	__u32	uniquifier;
-};
-
-/*
- * Arguments to the open call.
- */
-struct nfs_openargs {
-	const struct nfs_fh *	fh;
-	struct nfs_seqid *	seqid;
-	int			open_flags;
-	fmode_t			fmode;
-	__u64                   clientid;
-	struct stateowner_id	id;
-	union {
-		struct {
-			struct iattr *  attrs;    /* UNCHECKED, GUARDED */
-			nfs4_verifier   verifier; /* EXCLUSIVE */
-		};
-		nfs4_stateid	delegation;		/* CLAIM_DELEGATE_CUR */
-		fmode_t		delegation_type;	/* CLAIM_PREVIOUS */
-	} u;
-	const struct qstr *	name;
-	const struct nfs_server *server;	 /* Needed for ID mapping */
-	const u32 *		bitmask;
-	const u32 *		dir_bitmask;
-	__u32			claim;
-	struct nfs4_sequence_args	seq_args;
-};
-
-struct nfs_openres {
-	nfs4_stateid            stateid;
-	struct nfs_fh           fh;
-	struct nfs4_change_info	cinfo;
-	__u32                   rflags;
-	struct nfs_fattr *      f_attr;
-	struct nfs_fattr *      dir_attr;
-	struct nfs_seqid *	seqid;
-	const struct nfs_server *server;
-	fmode_t			delegation_type;
-	nfs4_stateid		delegation;
-	__u32			do_recall;
-	__u64			maxsize;
-	__u32			attrset[NFS4_BITMAP_SIZE];
-	struct nfs4_string	*owner;
-	struct nfs4_string	*group_owner;
-	struct nfs4_sequence_res	seq_res;
-};
-
-/*
- * Arguments to the open_confirm call.
- */
-struct nfs_open_confirmargs {
-	const struct nfs_fh *	fh;
-	nfs4_stateid *		stateid;
-	struct nfs_seqid *	seqid;
-};
-
-struct nfs_open_confirmres {
-	nfs4_stateid            stateid;
-	struct nfs_seqid *	seqid;
-};
-
-/*
- * Arguments to the close call.
- */
-struct nfs_closeargs {
-	struct nfs_fh *         fh;
-	nfs4_stateid *		stateid;
-	struct nfs_seqid *	seqid;
-	fmode_t			fmode;
-	const u32 *		bitmask;
-	struct nfs4_sequence_args	seq_args;
-};
-
-struct nfs_closeres {
-	nfs4_stateid            stateid;
-	struct nfs_fattr *	fattr;
-	struct nfs_seqid *	seqid;
-	const struct nfs_server *server;
-	struct nfs4_sequence_res	seq_res;
-};
-/*
- *  * Arguments to the lock,lockt, and locku call.
- *   */
-struct nfs_lowner {
-	__u64			clientid;
-	__u64			id;
-	dev_t			s_dev;
-};
-
-struct nfs_lock_args {
-	struct nfs_fh *		fh;
-	struct file_lock *	fl;
-	struct nfs_seqid *	lock_seqid;
-	nfs4_stateid *		lock_stateid;
-	struct nfs_seqid *	open_seqid;
-	nfs4_stateid *		open_stateid;
-	struct nfs_lowner	lock_owner;
-	unsigned char		block : 1;
-	unsigned char		reclaim : 1;
-	unsigned char		new_lock_owner : 1;
-	struct nfs4_sequence_args	seq_args;
-};
-
-struct nfs_lock_res {
-	nfs4_stateid		stateid;
-	struct nfs_seqid *	lock_seqid;
-	struct nfs_seqid *	open_seqid;
-	struct nfs4_sequence_res	seq_res;
-};
-
-struct nfs_locku_args {
-	struct nfs_fh *		fh;
-	struct file_lock *	fl;
-	struct nfs_seqid *	seqid;
-	nfs4_stateid *		stateid;
-	struct nfs4_sequence_args	seq_args;
-};
-
-struct nfs_locku_res {
-	nfs4_stateid		stateid;
-	struct nfs_seqid *	seqid;
-	struct nfs4_sequence_res	seq_res;
-};
-
-struct nfs_lockt_args {
-	struct nfs_fh *		fh;
-	struct file_lock *	fl;
-	struct nfs_lowner	lock_owner;
-	struct nfs4_sequence_args	seq_args;
-};
-
-struct nfs_lockt_res {
-	struct file_lock *	denied; /* LOCK, LOCKT failed */
-	struct nfs4_sequence_res	seq_res;
-};
-
-struct nfs_release_lockowner_args {
-	struct nfs_lowner	lock_owner;
-};
-
-struct nfs4_delegreturnargs {
-	const struct nfs_fh *fhandle;
-	const nfs4_stateid *stateid;
-	const u32 * bitmask;
-	struct nfs4_sequence_args	seq_args;
-};
-
-struct nfs4_delegreturnres {
-	struct nfs_fattr * fattr;
-	const struct nfs_server *server;
-	struct nfs4_sequence_res	seq_res;
-};
-
-/*
- * Arguments to the read call.
- */
-struct nfs_readargs {
-	struct nfs_fh *		fh;
-	struct nfs_open_context *context;
-	struct nfs_lock_context *lock_context;
-	__u64			offset;
-	__u32			count;
-	unsigned int		pgbase;
-	struct page **		pages;
-	struct nfs4_sequence_args	seq_args;
-};
-
-struct nfs_readres {
-	struct nfs_fattr *	fattr;
-	__u32			count;
-	int                     eof;
-	struct nfs4_sequence_res	seq_res;
-};
-
-/*
- * Arguments to the write call.
- */
-struct nfs_writeargs {
-	struct nfs_fh *		fh;
-	struct nfs_open_context *context;
-	struct nfs_lock_context *lock_context;
-	__u64			offset;
-	__u32			count;
-	enum nfs3_stable_how	stable;
-	unsigned int		pgbase;
-	struct page **		pages;
-	const u32 *		bitmask;
-	struct nfs4_sequence_args	seq_args;
-};
-
-struct nfs_writeverf {
-	enum nfs3_stable_how	committed;
-	__be32			verifier[2];
-};
-
-struct nfs_writeres {
-	struct nfs_fattr *	fattr;
-	struct nfs_writeverf *	verf;
-	__u32			count;
-	const struct nfs_server *server;
-	struct nfs4_sequence_res	seq_res;
-};
-
-/*
- * Common arguments to the unlink call
- */
-struct nfs_removeargs {
-	const struct nfs_fh	*fh;
-	struct qstr		name;
-	const u32 *		bitmask;
-	struct nfs4_sequence_args	seq_args;
-};
-
-struct nfs_removeres {
-	const struct nfs_server *server;
-	struct nfs_fattr	*dir_attr;
-	struct nfs4_change_info	cinfo;
-	struct nfs4_sequence_res 	seq_res;
-};
-
-/*
- * Common arguments to the rename call
- */
-struct nfs_renameargs {
-	const struct nfs_fh		*old_dir;
-	const struct nfs_fh		*new_dir;
-	const struct qstr		*old_name;
-	const struct qstr		*new_name;
-	const u32			*bitmask;
-	struct nfs4_sequence_args	seq_args;
-};
-
-struct nfs_renameres {
-	const struct nfs_server		*server;
-	struct nfs4_change_info		old_cinfo;
-	struct nfs_fattr		*old_fattr;
-	struct nfs4_change_info		new_cinfo;
-	struct nfs_fattr		*new_fattr;
-	struct nfs4_sequence_res	seq_res;
-};
-
-/*
- * Argument struct for decode_entry function
- */
-struct nfs_entry {
-	__u64			ino;
-	__u64			cookie,
-				prev_cookie;
-	const char *		name;
-	unsigned int		len;
-	int			eof;
-	struct nfs_fh *		fh;
-	struct nfs_fattr *	fattr;
-	unsigned char		d_type;
-	struct nfs_server *	server;
-};
-
-/*
- * The following types are for NFSv2 only.
- */
-struct nfs_sattrargs {
-	struct nfs_fh *		fh;
-	struct iattr *		sattr;
-};
-
-struct nfs_diropargs {
-	struct nfs_fh *		fh;
-	const char *		name;
-	unsigned int		len;
-};
-
-struct nfs_createargs {
-	struct nfs_fh *		fh;
-	const char *		name;
-	unsigned int		len;
-	struct iattr *		sattr;
-};
-
-struct nfs_setattrargs {
-	struct nfs_fh *                 fh;
-	nfs4_stateid                    stateid;
-	struct iattr *                  iap;
-	const struct nfs_server *	server; /* Needed for name mapping */
-	const u32 *			bitmask;
-	struct nfs4_sequence_args 	seq_args;
-};
-
-struct nfs_setaclargs {
-	struct nfs_fh *			fh;
-	size_t				acl_len;
-	unsigned int			acl_pgbase;
-	struct page **			acl_pages;
-	struct nfs4_sequence_args	seq_args;
-};
-
-struct nfs_setaclres {
-	struct nfs4_sequence_res	seq_res;
-};
-
-struct nfs_getaclargs {
-	struct nfs_fh *			fh;
-	size_t				acl_len;
-	unsigned int			acl_pgbase;
-	struct page **			acl_pages;
-	struct nfs4_sequence_args 	seq_args;
-};
-
-/* getxattr ACL interface flags */
-#define NFS4_ACL_LEN_REQUEST	0x0001	/* zero length getxattr buffer */
-struct nfs_getaclres {
-	size_t				acl_len;
-	size_t				acl_data_offset;
-	int				acl_flags;
-	struct page *			acl_scratch;
-	struct nfs4_sequence_res	seq_res;
-};
-
-struct nfs_setattrres {
-	struct nfs_fattr *              fattr;
-	const struct nfs_server *	server;
-	struct nfs4_sequence_res	seq_res;
-};
-
-struct nfs_linkargs {
-	struct nfs_fh *		fromfh;
-	struct nfs_fh *		tofh;
-	const char *		toname;
-	unsigned int		tolen;
-};
-
-struct nfs_symlinkargs {
-	struct nfs_fh *		fromfh;
-	const char *		fromname;
-	unsigned int		fromlen;
-	struct page **		pages;
-	unsigned int		pathlen;
-	struct iattr *		sattr;
-};
-
-struct nfs_readdirargs {
-	struct nfs_fh *		fh;
-	__u32			cookie;
-	unsigned int		count;
-	struct page **		pages;
-};
-
-struct nfs3_getaclargs {
-	struct nfs_fh *		fh;
-	int			mask;
-	struct page **		pages;
-};
-
-struct nfs3_setaclargs {
-	struct inode *		inode;
-	int			mask;
-	struct posix_acl *	acl_access;
-	struct posix_acl *	acl_default;
-	size_t			len;
-	unsigned int		npages;
-	struct page **		pages;
-};
-
-struct nfs_diropok {
-	struct nfs_fh *		fh;
-	struct nfs_fattr *	fattr;
-};
-
-struct nfs_readlinkargs {
-	struct nfs_fh *		fh;
-	unsigned int		pgbase;
-	unsigned int		pglen;
-	struct page **		pages;
-};
-
-struct nfs3_sattrargs {
-	struct nfs_fh *		fh;
-	struct iattr *		sattr;
-	unsigned int		guard;
-	struct timespec		guardtime;
-};
-
-struct nfs3_diropargs {
-	struct nfs_fh *		fh;
-	const char *		name;
-	unsigned int		len;
-};
-
-struct nfs3_accessargs {
-	struct nfs_fh *		fh;
-	__u32			access;
-};
-
-struct nfs3_createargs {
-	struct nfs_fh *		fh;
-	const char *		name;
-	unsigned int		len;
-	struct iattr *		sattr;
-	enum nfs3_createmode	createmode;
-	__be32			verifier[2];
-};
-
-struct nfs3_mkdirargs {
-	struct nfs_fh *		fh;
-	const char *		name;
-	unsigned int		len;
-	struct iattr *		sattr;
-};
-
-struct nfs3_symlinkargs {
-	struct nfs_fh *		fromfh;
-	const char *		fromname;
-	unsigned int		fromlen;
-	struct page **		pages;
-	unsigned int		pathlen;
-	struct iattr *		sattr;
-};
-
-struct nfs3_mknodargs {
-	struct nfs_fh *		fh;
-	const char *		name;
-	unsigned int		len;
-	enum nfs3_ftype		type;
-	struct iattr *		sattr;
-	dev_t			rdev;
-};
-
-struct nfs3_linkargs {
-	struct nfs_fh *		fromfh;
-	struct nfs_fh *		tofh;
-	const char *		toname;
-	unsigned int		tolen;
-};
-
-struct nfs3_readdirargs {
-	struct nfs_fh *		fh;
-	__u64			cookie;
-	__be32			verf[2];
-	int			plus;
-	unsigned int            count;
-	struct page **		pages;
-};
-
-struct nfs3_diropres {
-	struct nfs_fattr *	dir_attr;
-	struct nfs_fh *		fh;
-	struct nfs_fattr *	fattr;
-};
-
-struct nfs3_accessres {
-	struct nfs_fattr *	fattr;
-	__u32			access;
-};
-
-struct nfs3_readlinkargs {
-	struct nfs_fh *		fh;
-	unsigned int		pgbase;
-	unsigned int		pglen;
-	struct page **		pages;
-};
-
-struct nfs3_linkres {
-	struct nfs_fattr *	dir_attr;
-	struct nfs_fattr *	fattr;
-};
-
-struct nfs3_readdirres {
-	struct nfs_fattr *	dir_attr;
-	__be32 *		verf;
-	int			plus;
-};
-
-struct nfs3_getaclres {
-	struct nfs_fattr *	fattr;
-	int			mask;
-	unsigned int		acl_access_count;
-	unsigned int		acl_default_count;
-	struct posix_acl *	acl_access;
-	struct posix_acl *	acl_default;
-};
-
-#ifdef CONFIG_NFS_V4
-
-typedef u64 clientid4;
-
-struct nfs4_accessargs {
-	const struct nfs_fh *		fh;
-	const u32 *			bitmask;
-	u32				access;
-	struct nfs4_sequence_args	seq_args;
-};
-
-struct nfs4_accessres {
-	const struct nfs_server *	server;
-	struct nfs_fattr *		fattr;
-	u32				supported;
-	u32				access;
-	struct nfs4_sequence_res	seq_res;
-};
-
-struct nfs4_create_arg {
-	u32				ftype;
-	union {
-		struct {
-			struct page **	pages;
-			unsigned int	len;
-		} symlink;   /* NF4LNK */
-		struct {
-			u32		specdata1;
-			u32		specdata2;
-		} device;    /* NF4BLK, NF4CHR */
-	} u;
-	const struct qstr *		name;
-	const struct nfs_server *	server;
-	const struct iattr *		attrs;
-	const struct nfs_fh *		dir_fh;
-	const u32 *			bitmask;
-	struct nfs4_sequence_args 	seq_args;
-};
-
-struct nfs4_create_res {
-	const struct nfs_server *	server;
-	struct nfs_fh *			fh;
-	struct nfs_fattr *		fattr;
-	struct nfs4_change_info		dir_cinfo;
-	struct nfs_fattr *		dir_fattr;
-	struct nfs4_sequence_res	seq_res;
-};
-
-struct nfs4_fsinfo_arg {
-	const struct nfs_fh *		fh;
-	const u32 *			bitmask;
-	struct nfs4_sequence_args	seq_args;
-};
-
-struct nfs4_fsinfo_res {
-	struct nfs_fsinfo	       *fsinfo;
-	struct nfs4_sequence_res	seq_res;
-};
-
-struct nfs4_getattr_arg {
-	const struct nfs_fh *		fh;
-	const u32 *			bitmask;
-	struct nfs4_sequence_args	seq_args;
-};
-
-struct nfs4_getattr_res {
-	const struct nfs_server *	server;
-	struct nfs_fattr *		fattr;
-	struct nfs4_sequence_res	seq_res;
-};
-
-struct nfs4_link_arg {
-	const struct nfs_fh *		fh;
-	const struct nfs_fh *		dir_fh;
-	const struct qstr *		name;
-	const u32 *			bitmask;
-	struct nfs4_sequence_args 	seq_args;
-};
-
-struct nfs4_link_res {
-	const struct nfs_server *	server;
-	struct nfs_fattr *		fattr;
-	struct nfs4_change_info		cinfo;
-	struct nfs_fattr *		dir_attr;
-	struct nfs4_sequence_res	seq_res;
-};
-
-
-struct nfs4_lookup_arg {
-	const struct nfs_fh *		dir_fh;
-	const struct qstr *		name;
-	const u32 *			bitmask;
-	struct nfs4_sequence_args	seq_args;
-};
-
-struct nfs4_lookup_res {
-	const struct nfs_server *	server;
-	struct nfs_fattr *		fattr;
-	struct nfs_fh *			fh;
-	struct nfs4_sequence_res	seq_res;
-};
-
-struct nfs4_lookup_root_arg {
-	const u32 *			bitmask;
-	struct nfs4_sequence_args	seq_args;
-};
-
-struct nfs4_pathconf_arg {
-	const struct nfs_fh *		fh;
-	const u32 *			bitmask;
-	struct nfs4_sequence_args	seq_args;
-};
-
-struct nfs4_pathconf_res {
-	struct nfs_pathconf	       *pathconf;
-	struct nfs4_sequence_res	seq_res;
-};
-
-struct nfs4_readdir_arg {
-	const struct nfs_fh *		fh;
-	u64				cookie;
-	nfs4_verifier			verifier;
-	u32				count;
-	struct page **			pages;	/* zero-copy data */
-	unsigned int			pgbase;	/* zero-copy data */
-	const u32 *			bitmask;
-	int				plus;
-	struct nfs4_sequence_args	seq_args;
-};
-
-struct nfs4_readdir_res {
-	nfs4_verifier			verifier;
-	unsigned int			pgbase;
-	struct nfs4_sequence_res	seq_res;
-};
-
-struct nfs4_readlink {
-	const struct nfs_fh *		fh;
-	unsigned int			pgbase;
-	unsigned int			pglen;   /* zero-copy data */
-	struct page **			pages;   /* zero-copy data */
-	struct nfs4_sequence_args	seq_args;
-};
-
-struct nfs4_readlink_res {
-	struct nfs4_sequence_res	seq_res;
-};
-
-#define NFS4_SETCLIENTID_NAMELEN	(127)
-struct nfs4_setclientid {
-	const nfs4_verifier *		sc_verifier;
-	unsigned int			sc_name_len;
-	char				sc_name[NFS4_SETCLIENTID_NAMELEN + 1];
-	u32				sc_prog;
-	unsigned int			sc_netid_len;
-	char				sc_netid[RPCBIND_MAXNETIDLEN + 1];
-	unsigned int			sc_uaddr_len;
-	char				sc_uaddr[RPCBIND_MAXUADDRLEN + 1];
-	u32				sc_cb_ident;
-};
-
-struct nfs4_setclientid_res {
-	u64				clientid;
-	nfs4_verifier			confirm;
-};
-
-struct nfs4_statfs_arg {
-	const struct nfs_fh *		fh;
-	const u32 *			bitmask;
-	struct nfs4_sequence_args	seq_args;
-};
-
-struct nfs4_statfs_res {
-	struct nfs_fsstat	       *fsstat;
-	struct nfs4_sequence_res	seq_res;
-};
-
-struct nfs4_server_caps_arg {
-	struct nfs_fh		       *fhandle;
-	struct nfs4_sequence_args	seq_args;
-};
-
-struct nfs4_server_caps_res {
-	u32				attr_bitmask[3];
-	u32				acl_bitmask;
-	u32				has_links;
-	u32				has_symlinks;
-	u32				fh_expire_type;
-	struct nfs4_sequence_res	seq_res;
-};
-
-#define NFS4_PATHNAME_MAXCOMPONENTS 512
-struct nfs4_pathname {
-	unsigned int ncomponents;
-	struct nfs4_string components[NFS4_PATHNAME_MAXCOMPONENTS];
-};
-
-#define NFS4_FS_LOCATION_MAXSERVERS 10
-struct nfs4_fs_location {
-	unsigned int nservers;
-	struct nfs4_string servers[NFS4_FS_LOCATION_MAXSERVERS];
-	struct nfs4_pathname rootpath;
-};
-
-#define NFS4_FS_LOCATIONS_MAXENTRIES 10
-struct nfs4_fs_locations {
-	struct nfs_fattr fattr;
-	const struct nfs_server *server;
-	struct nfs4_pathname fs_path;
-	int nlocations;
-	struct nfs4_fs_location locations[NFS4_FS_LOCATIONS_MAXENTRIES];
-};
-
-struct nfs4_fs_locations_arg {
-	const struct nfs_fh *dir_fh;
-	const struct qstr *name;
-	struct page *page;
-	const u32 *bitmask;
-	struct nfs4_sequence_args	seq_args;
-};
-
-struct nfs4_fs_locations_res {
-	struct nfs4_fs_locations       *fs_locations;
-	struct nfs4_sequence_res	seq_res;
-};
-
-struct nfs4_secinfo_oid {
-	unsigned int len;
-	char data[GSS_OID_MAX_LEN];
-};
-
-struct nfs4_secinfo_gss {
-	struct nfs4_secinfo_oid sec_oid4;
-	unsigned int qop4;
-	unsigned int service;
-};
-
-struct nfs4_secinfo_flavor {
-	unsigned int 		flavor;
-	struct nfs4_secinfo_gss	gss;
-};
-
-struct nfs4_secinfo_flavors {
-	unsigned int num_flavors;
-	struct nfs4_secinfo_flavor flavors[0];
-};
-
-struct nfs4_secinfo_arg {
-	const struct nfs_fh		*dir_fh;
-	const struct qstr		*name;
-	struct nfs4_sequence_args	seq_args;
-};
-
-struct nfs4_secinfo_res {
-	struct nfs4_secinfo_flavors	*flavors;
-	struct nfs4_sequence_res	seq_res;
-};
-
-#endif /* CONFIG_NFS_V4 */
-
-struct nfstime4 {
-	u64	seconds;
-	u32	nseconds;
-};
-
-#ifdef CONFIG_NFS_V4_1
-#define NFS4_EXCHANGE_ID_LEN	(48)
-struct nfs41_exchange_id_args {
-	struct nfs_client		*client;
-	nfs4_verifier			*verifier;
-	unsigned int 			id_len;
-	char 				id[NFS4_EXCHANGE_ID_LEN];
-	u32				flags;
-};
-
-struct server_owner {
-	uint64_t			minor_id;
-	uint32_t			major_id_sz;
-	char				major_id[NFS4_OPAQUE_LIMIT];
-};
-
-struct server_scope {
-	uint32_t			server_scope_sz;
-	char 				server_scope[NFS4_OPAQUE_LIMIT];
-};
-
-struct nfs41_impl_id {
-	char				domain[NFS4_OPAQUE_LIMIT + 1];
-	char				name[NFS4_OPAQUE_LIMIT + 1];
-	struct nfstime4			date;
-};
-
-struct nfs41_exchange_id_res {
-	struct nfs_client		*client;
-	u32				flags;
-	struct server_scope		*server_scope;
-	struct nfs41_impl_id		*impl_id;
-};
-
-struct nfs41_create_session_args {
-	struct nfs_client	       *client;
-	uint32_t			flags;
-	uint32_t			cb_program;
-	struct nfs4_channel_attrs	fc_attrs;	/* Fore Channel */
-	struct nfs4_channel_attrs	bc_attrs;	/* Back Channel */
-};
-
-struct nfs41_create_session_res {
-	struct nfs_client	       *client;
-};
-
-struct nfs41_reclaim_complete_args {
-	/* In the future extend to include curr_fh for use with migration */
-	unsigned char			one_fs:1;
-	struct nfs4_sequence_args	seq_args;
-};
-
-struct nfs41_reclaim_complete_res {
-	struct nfs4_sequence_res	seq_res;
-};
-
-#define SECINFO_STYLE_CURRENT_FH 0
-#define SECINFO_STYLE_PARENT 1
-struct nfs41_secinfo_no_name_args {
-	int				style;
-	struct nfs4_sequence_args	seq_args;
-};
-
-struct nfs41_test_stateid_args {
-	nfs4_stateid			*stateid;
-	struct nfs4_sequence_args	seq_args;
-};
-
-struct nfs41_test_stateid_res {
-	unsigned int			status;
-	struct nfs4_sequence_res	seq_res;
-};
-
-struct nfs41_free_stateid_args {
-	nfs4_stateid			*stateid;
-	struct nfs4_sequence_args	seq_args;
-};
-
-struct nfs41_free_stateid_res {
-	unsigned int			status;
-	struct nfs4_sequence_res	seq_res;
-};
-
-#endif /* CONFIG_NFS_V4_1 */
-
-struct nfs_page;
-
-#define NFS_PAGEVEC_SIZE	(8U)
-
-struct nfs_read_data {
-	struct rpc_task		task;
-	struct inode		*inode;
-	struct rpc_cred		*cred;
-	struct nfs_fattr	fattr;	/* fattr storage */
-	struct list_head	pages;	/* Coalesced read requests */
-	struct list_head	list;	/* lists of struct nfs_read_data */
-	struct nfs_page		*req;	/* multi ops per nfs_page */
-	struct page		**pagevec;
-	unsigned int		npages;	/* Max length of pagevec */
-	struct nfs_readargs args;
-	struct nfs_readres  res;
-	unsigned long		timestamp;	/* For lease renewal */
-	struct pnfs_layout_segment *lseg;
-	struct nfs_client	*ds_clp;	/* pNFS data server */
-	const struct rpc_call_ops *mds_ops;
-	int (*read_done_cb) (struct rpc_task *task, struct nfs_read_data *data);
-	__u64			mds_offset;
-	int			pnfs_error;
-	struct page		*page_array[NFS_PAGEVEC_SIZE];
-};
-
-struct nfs_write_data {
-	struct rpc_task		task;
-	struct inode		*inode;
-	struct rpc_cred		*cred;
-	struct nfs_fattr	fattr;
-	struct nfs_writeverf	verf;
-	struct list_head	pages;		/* Coalesced requests we wish to flush */
-	struct list_head	list;		/* lists of struct nfs_write_data */
-	struct nfs_page		*req;		/* multi ops per nfs_page */
-	struct page		**pagevec;
-	unsigned int		npages;		/* Max length of pagevec */
-	struct nfs_writeargs	args;		/* argument struct */
-	struct nfs_writeres	res;		/* result struct */
-	struct pnfs_layout_segment *lseg;
-	struct nfs_client	*ds_clp;	/* pNFS data server */
-	int			ds_commit_index;
-	const struct rpc_call_ops *mds_ops;
-	int (*write_done_cb) (struct rpc_task *task, struct nfs_write_data *data);
-#ifdef CONFIG_NFS_V4
-	unsigned long		timestamp;	/* For lease renewal */
-#endif
-	__u64			mds_offset;	/* Filelayout dense stripe */
-	int			pnfs_error;
-	struct page		*page_array[NFS_PAGEVEC_SIZE];
-};
-
-struct nfs_unlinkdata {
-	struct hlist_node list;
-	struct nfs_removeargs args;
-	struct nfs_removeres res;
-	struct inode *dir;
-	struct rpc_cred	*cred;
-	struct nfs_fattr dir_attr;
-};
-
-struct nfs_renamedata {
-	struct nfs_renameargs	args;
-	struct nfs_renameres	res;
-	struct rpc_cred		*cred;
-	struct inode		*old_dir;
-	struct dentry		*old_dentry;
-	struct nfs_fattr	old_fattr;
-	struct inode		*new_dir;
-	struct dentry		*new_dentry;
-	struct nfs_fattr	new_fattr;
-};
-
-struct nfs_access_entry;
-struct nfs_client;
-struct rpc_timeout;
-
-/*
- * RPC procedure vector for NFSv2/NFSv3 demuxing
- */
-struct nfs_rpc_ops {
-	u32	version;		/* Protocol version */
-	const struct dentry_operations *dentry_ops;
-	const struct inode_operations *dir_inode_ops;
-	const struct inode_operations *file_inode_ops;
-	const struct file_operations *file_ops;
-
-	int	(*getroot) (struct nfs_server *, struct nfs_fh *,
-			    struct nfs_fsinfo *);
-	int	(*getattr) (struct nfs_server *, struct nfs_fh *,
-			    struct nfs_fattr *);
-	int	(*setattr) (struct dentry *, struct nfs_fattr *,
-			    struct iattr *);
-	int	(*lookup)  (struct rpc_clnt *clnt, struct inode *, struct qstr *,
-			    struct nfs_fh *, struct nfs_fattr *);
-	int	(*access)  (struct inode *, struct nfs_access_entry *);
-	int	(*readlink)(struct inode *, struct page *, unsigned int,
-			    unsigned int);
-	int	(*create)  (struct inode *, struct dentry *,
-			    struct iattr *, int, struct nfs_open_context *);
-	int	(*remove)  (struct inode *, struct qstr *);
-	void	(*unlink_setup)  (struct rpc_message *, struct inode *dir);
-	void	(*unlink_rpc_prepare) (struct rpc_task *, struct nfs_unlinkdata *);
-	int	(*unlink_done) (struct rpc_task *, struct inode *);
-	int	(*rename)  (struct inode *, struct qstr *,
-			    struct inode *, struct qstr *);
-	void	(*rename_setup)  (struct rpc_message *msg, struct inode *dir);
-	void	(*rename_rpc_prepare)(struct rpc_task *task, struct nfs_renamedata *);
-	int	(*rename_done) (struct rpc_task *task, struct inode *old_dir, struct inode *new_dir);
-	int	(*link)    (struct inode *, struct inode *, struct qstr *);
-	int	(*symlink) (struct inode *, struct dentry *, struct page *,
-			    unsigned int, struct iattr *);
-	int	(*mkdir)   (struct inode *, struct dentry *, struct iattr *);
-	int	(*rmdir)   (struct inode *, struct qstr *);
-	int	(*readdir) (struct dentry *, struct rpc_cred *,
-			    u64, struct page **, unsigned int, int);
-	int	(*mknod)   (struct inode *, struct dentry *, struct iattr *,
-			    dev_t);
-	int	(*statfs)  (struct nfs_server *, struct nfs_fh *,
-			    struct nfs_fsstat *);
-	int	(*fsinfo)  (struct nfs_server *, struct nfs_fh *,
-			    struct nfs_fsinfo *);
-	int	(*pathconf) (struct nfs_server *, struct nfs_fh *,
-			     struct nfs_pathconf *);
-	int	(*set_capabilities)(struct nfs_server *, struct nfs_fh *);
-	int	(*decode_dirent)(struct xdr_stream *, struct nfs_entry *, int);
-	void	(*read_setup)   (struct nfs_read_data *, struct rpc_message *);
-	void	(*read_rpc_prepare)(struct rpc_task *, struct nfs_read_data *);
-	int	(*read_done)  (struct rpc_task *, struct nfs_read_data *);
-	void	(*write_setup)  (struct nfs_write_data *, struct rpc_message *);
-	void	(*write_rpc_prepare)(struct rpc_task *, struct nfs_write_data *);
-	int	(*write_done)  (struct rpc_task *, struct nfs_write_data *);
-	void	(*commit_setup) (struct nfs_write_data *, struct rpc_message *);
-	int	(*commit_done) (struct rpc_task *, struct nfs_write_data *);
-	int	(*lock)(struct file *, int, struct file_lock *);
-	int	(*lock_check_bounds)(const struct file_lock *);
-	void	(*clear_acl_cache)(struct inode *);
-	void	(*close_context)(struct nfs_open_context *ctx, int);
-	struct inode * (*open_context) (struct inode *dir,
-				struct nfs_open_context *ctx,
-				int open_flags,
-				struct iattr *iattr);
-	int	(*init_client) (struct nfs_client *, const struct rpc_timeout *,
-				const char *, rpc_authflavor_t, int);
-	int	(*secinfo)(struct inode *, const struct qstr *, struct nfs4_secinfo_flavors *);
-};
-
-/*
- * 	NFS_CALL(getattr, inode, (fattr));
- * into
- *	NFS_PROTO(inode)->getattr(fattr);
- */
-#define NFS_CALL(op, inode, args)	NFS_PROTO(inode)->op args
-
-/*
- * Function vectors etc. for the NFS client
- */
-extern const struct nfs_rpc_ops	nfs_v2_clientops;
-extern const struct nfs_rpc_ops	nfs_v3_clientops;
-extern const struct nfs_rpc_ops	nfs_v4_clientops;
-extern const struct rpc_version nfs_version2;
-extern const struct rpc_version nfs_version3;
-extern const struct rpc_version nfs_version4;
-
-extern const struct rpc_version nfsacl_version3;
-extern const struct rpc_program nfsacl_program;
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/nfsacl.h b/ANDROID_3.4.5/include/linux/nfsacl.h
deleted file mode 100644
index fabcb1e5..00000000
--- a/ANDROID_3.4.5/include/linux/nfsacl.h
+++ /dev/null
@@ -1,62 +0,0 @@
-/*
- * File: linux/nfsacl.h
- *
- * (C) 2003 Andreas Gruenbacher <agruen@suse.de>
- */
-#ifndef __LINUX_NFSACL_H
-#define __LINUX_NFSACL_H
-
-#define NFS_ACL_PROGRAM	100227
-
-#define ACLPROC2_GETACL		1
-#define ACLPROC2_SETACL		2
-#define ACLPROC2_GETATTR	3
-#define ACLPROC2_ACCESS		4
-
-#define ACLPROC3_GETACL		1
-#define ACLPROC3_SETACL		2
-
-
-/* Flags for the getacl/setacl mode */
-#define NFS_ACL			0x0001
-#define NFS_ACLCNT		0x0002
-#define NFS_DFACL		0x0004
-#define NFS_DFACLCNT		0x0008
-
-/* Flag for Default ACL entries */
-#define NFS_ACL_DEFAULT		0x1000
-
-#ifdef __KERNEL__
-
-#include <linux/posix_acl.h>
-#include <linux/sunrpc/xdr.h>
-
-/* Maximum number of ACL entries over NFS */
-#define NFS_ACL_MAX_ENTRIES	1024
-
-#define NFSACL_MAXWORDS		(2*(2+3*NFS_ACL_MAX_ENTRIES))
-#define NFSACL_MAXPAGES		((2*(8+12*NFS_ACL_MAX_ENTRIES) + PAGE_SIZE-1) \
-				 >> PAGE_SHIFT)
-
-#define NFS_ACL_MAX_ENTRIES_INLINE	(5)
-#define NFS_ACL_INLINE_BUFSIZE	((2*(2+3*NFS_ACL_MAX_ENTRIES_INLINE)) << 2)
-
-static inline unsigned int
-nfsacl_size(struct posix_acl *acl_access, struct posix_acl *acl_default)
-{
-	unsigned int w = 16;
-	w += max(acl_access ? (int)acl_access->a_count : 3, 4) * 12;
-	if (acl_default)
-		w += max((int)acl_default->a_count, 4) * 12;
-	return w;
-}
-
-extern int
-nfsacl_encode(struct xdr_buf *buf, unsigned int base, struct inode *inode,
-	      struct posix_acl *acl, int encode_entries, int typeflag);
-extern int
-nfsacl_decode(struct xdr_buf *buf, unsigned int base, unsigned int *aclcnt,
-	      struct posix_acl **pacl);
-
-#endif /* __KERNEL__ */
-#endif  /* __LINUX_NFSACL_H */
diff --git a/ANDROID_3.4.5/include/linux/nfsd/Kbuild b/ANDROID_3.4.5/include/linux/nfsd/Kbuild
deleted file mode 100644
index 5b7d84ac..00000000
--- a/ANDROID_3.4.5/include/linux/nfsd/Kbuild
+++ /dev/null
@@ -1,5 +0,0 @@
-header-y += cld.h
-header-y += debug.h
-header-y += export.h
-header-y += nfsfh.h
-header-y += stats.h
diff --git a/ANDROID_3.4.5/include/linux/nfsd/cld.h b/ANDROID_3.4.5/include/linux/nfsd/cld.h
deleted file mode 100644
index f14a9ab0..00000000
--- a/ANDROID_3.4.5/include/linux/nfsd/cld.h
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- * Upcall description for nfsdcld communication
- *
- * Copyright (c) 2012 Red Hat, Inc.
- * Author(s): Jeff Layton <jlayton@redhat.com>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef _NFSD_CLD_H
-#define _NFSD_CLD_H
-
-/* latest upcall version available */
-#define CLD_UPCALL_VERSION 1
-
-/* defined by RFC3530 */
-#define NFS4_OPAQUE_LIMIT 1024
-
-enum cld_command {
-	Cld_Create,		/* create a record for this cm_id */
-	Cld_Remove,		/* remove record of this cm_id */
-	Cld_Check,		/* is this cm_id allowed? */
-	Cld_GraceDone,		/* grace period is complete */
-};
-
-/* representation of long-form NFSv4 client ID */
-struct cld_name {
-	uint16_t	cn_len;				/* length of cm_id */
-	unsigned char	cn_id[NFS4_OPAQUE_LIMIT];	/* client-provided */
-} __attribute__((packed));
-
-/* message struct for communication with userspace */
-struct cld_msg {
-	uint8_t		cm_vers;		/* upcall version */
-	uint8_t		cm_cmd;			/* upcall command */
-	int16_t		cm_status;		/* return code */
-	uint32_t	cm_xid;			/* transaction id */
-	union {
-		int64_t		cm_gracetime;	/* grace period start time */
-		struct cld_name	cm_name;
-	} __attribute__((packed)) cm_u;
-} __attribute__((packed));
-
-#endif /* !_NFSD_CLD_H */
diff --git a/ANDROID_3.4.5/include/linux/nfsd/debug.h b/ANDROID_3.4.5/include/linux/nfsd/debug.h
deleted file mode 100644
index ee4aa917..00000000
--- a/ANDROID_3.4.5/include/linux/nfsd/debug.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * linux/include/linux/nfsd/debug.h
- *
- * Debugging-related stuff for nfsd
- *
- * Copyright (C) 1995 Olaf Kirch <okir@monad.swb.de>
- */
-
-#ifndef LINUX_NFSD_DEBUG_H
-#define LINUX_NFSD_DEBUG_H
-
-#include <linux/sunrpc/debug.h>
-
-/*
- * Enable debugging for nfsd.
- * Requires RPC_DEBUG.
- */
-#ifdef RPC_DEBUG
-# define NFSD_DEBUG		1
-#endif
-
-/*
- * knfsd debug flags
- */
-#define NFSDDBG_SOCK		0x0001
-#define NFSDDBG_FH		0x0002
-#define NFSDDBG_EXPORT		0x0004
-#define NFSDDBG_SVC		0x0008
-#define NFSDDBG_PROC		0x0010
-#define NFSDDBG_FILEOP		0x0020
-#define NFSDDBG_AUTH		0x0040
-#define NFSDDBG_REPCACHE	0x0080
-#define NFSDDBG_XDR		0x0100
-#define NFSDDBG_LOCKD		0x0200
-#define NFSDDBG_ALL		0x7FFF
-#define NFSDDBG_NOCHANGE	0xFFFF
-
-
-#ifdef __KERNEL__
-# undef ifdebug
-# ifdef NFSD_DEBUG
-#  define ifdebug(flag)		if (nfsd_debug & NFSDDBG_##flag)
-# else
-#  define ifdebug(flag)		if (0)
-# endif
-#endif /* __KERNEL__ */
-
-#endif /* LINUX_NFSD_DEBUG_H */
diff --git a/ANDROID_3.4.5/include/linux/nfsd/export.h b/ANDROID_3.4.5/include/linux/nfsd/export.h
deleted file mode 100644
index f85308e6..00000000
--- a/ANDROID_3.4.5/include/linux/nfsd/export.h
+++ /dev/null
@@ -1,161 +0,0 @@
-/*
- * include/linux/nfsd/export.h
- * 
- * Public declarations for NFS exports. The definitions for the
- * syscall interface are in nfsctl.h
- *
- * Copyright (C) 1995-1997 Olaf Kirch <okir@monad.swb.de>
- */
-
-#ifndef NFSD_EXPORT_H
-#define NFSD_EXPORT_H
-
-# include <linux/types.h>
-#ifdef __KERNEL__
-# include <linux/nfsd/nfsfh.h>
-#endif
-
-/*
- * Important limits for the exports stuff.
- */
-#define NFSCLNT_IDMAX		1024
-#define NFSCLNT_ADDRMAX		16
-#define NFSCLNT_KEYMAX		32
-
-/*
- * Export flags.
- */
-#define NFSEXP_READONLY		0x0001
-#define NFSEXP_INSECURE_PORT	0x0002
-#define NFSEXP_ROOTSQUASH	0x0004
-#define NFSEXP_ALLSQUASH	0x0008
-#define NFSEXP_ASYNC		0x0010
-#define NFSEXP_GATHERED_WRITES	0x0020
-/* 40 80 100 currently unused */
-#define NFSEXP_NOHIDE		0x0200
-#define NFSEXP_NOSUBTREECHECK	0x0400
-#define	NFSEXP_NOAUTHNLM	0x0800		/* Don't authenticate NLM requests - just trust */
-#define NFSEXP_MSNFS		0x1000	/* do silly things that MS clients expect; no longer supported */
-#define NFSEXP_FSID		0x2000
-#define	NFSEXP_CROSSMOUNT	0x4000
-#define	NFSEXP_NOACL		0x8000	/* reserved for possible ACL related use */
-/*
- * The NFSEXP_V4ROOT flag causes the kernel to give access only to NFSv4
- * clients, and only to the single directory that is the root of the
- * export; further lookup and readdir operations are treated as if every
- * subdirectory was a mountpoint, and ignored if they are not themselves
- * exported.  This is used by nfsd and mountd to construct the NFSv4
- * pseudofilesystem, which provides access only to paths leading to each
- * exported filesystem.
- */
-#define	NFSEXP_V4ROOT		0x10000
-/* All flags that we claim to support.  (Note we don't support NOACL.) */
-#define NFSEXP_ALLFLAGS		0x17E3F
-
-/* The flags that may vary depending on security flavor: */
-#define NFSEXP_SECINFO_FLAGS	(NFSEXP_READONLY | NFSEXP_ROOTSQUASH \
-					| NFSEXP_ALLSQUASH \
-					| NFSEXP_INSECURE_PORT)
-
-#ifdef __KERNEL__
-
-/*
- * FS Locations
- */
-
-#define MAX_FS_LOCATIONS	128
-
-struct nfsd4_fs_location {
-	char *hosts; /* colon separated list of hosts */
-	char *path;  /* slash separated list of path components */
-};
-
-struct nfsd4_fs_locations {
-	uint32_t locations_count;
-	struct nfsd4_fs_location *locations;
-/* If we're not actually serving this data ourselves (only providing a
- * list of replicas that do serve it) then we set "migrated": */
-	int migrated;
-};
-
-/*
- * We keep an array of pseudoflavors with the export, in order from most
- * to least preferred.  For the foreseeable future, we don't expect more
- * than the eight pseudoflavors null, unix, krb5, krb5i, krb5p, skpm3,
- * spkm3i, and spkm3p (and using all 8 at once should be rare).
- */
-#define MAX_SECINFO_LIST	8
-
-struct exp_flavor_info {
-	u32	pseudoflavor;
-	u32	flags;
-};
-
-struct svc_export {
-	struct cache_head	h;
-	struct auth_domain *	ex_client;
-	int			ex_flags;
-	struct path		ex_path;
-	uid_t			ex_anon_uid;
-	gid_t			ex_anon_gid;
-	int			ex_fsid;
-	unsigned char *		ex_uuid; /* 16 byte fsid */
-	struct nfsd4_fs_locations ex_fslocs;
-	int			ex_nflavors;
-	struct exp_flavor_info	ex_flavors[MAX_SECINFO_LIST];
-};
-
-/* an "export key" (expkey) maps a filehandlefragement to an
- * svc_export for a given client.  There can be several per export,
- * for the different fsid types.
- */
-struct svc_expkey {
-	struct cache_head	h;
-
-	struct auth_domain *	ek_client;
-	int			ek_fsidtype;
-	u32			ek_fsid[6];
-
-	struct path		ek_path;
-};
-
-#define EX_ISSYNC(exp)		(!((exp)->ex_flags & NFSEXP_ASYNC))
-#define EX_NOHIDE(exp)		((exp)->ex_flags & NFSEXP_NOHIDE)
-#define EX_WGATHER(exp)		((exp)->ex_flags & NFSEXP_GATHERED_WRITES)
-
-int nfsexp_flags(struct svc_rqst *rqstp, struct svc_export *exp);
-__be32 check_nfsd_access(struct svc_export *exp, struct svc_rqst *rqstp);
-
-/*
- * Function declarations
- */
-int			nfsd_export_init(void);
-void			nfsd_export_shutdown(void);
-void			nfsd_export_flush(void);
-struct svc_export *	rqst_exp_get_by_name(struct svc_rqst *,
-					     struct path *);
-struct svc_export *	rqst_exp_parent(struct svc_rqst *,
-					struct path *);
-struct svc_export *	rqst_find_fsidzero_export(struct svc_rqst *);
-int			exp_rootfh(struct auth_domain *, 
-					char *path, struct knfsd_fh *, int maxsize);
-__be32			exp_pseudoroot(struct svc_rqst *, struct svc_fh *);
-__be32			nfserrno(int errno);
-
-extern struct cache_detail svc_export_cache;
-
-static inline void exp_put(struct svc_export *exp)
-{
-	cache_put(&exp->h, &svc_export_cache);
-}
-
-static inline void exp_get(struct svc_export *exp)
-{
-	cache_get(&exp->h);
-}
-struct svc_export * rqst_exp_find(struct svc_rqst *, int, u32 *);
-
-#endif /* __KERNEL__ */
-
-#endif /* NFSD_EXPORT_H */
-
diff --git a/ANDROID_3.4.5/include/linux/nfsd/nfsfh.h b/ANDROID_3.4.5/include/linux/nfsd/nfsfh.h
deleted file mode 100644
index ce4743a2..00000000
--- a/ANDROID_3.4.5/include/linux/nfsd/nfsfh.h
+++ /dev/null
@@ -1,171 +0,0 @@
-/*
- * include/linux/nfsd/nfsfh.h
- *
- * This file describes the layout of the file handles as passed
- * over the wire.
- *
- * Earlier versions of knfsd used to sign file handles using keyed MD5
- * or SHA. I've removed this code, because it doesn't give you more
- * security than blocking external access to port 2049 on your firewall.
- *
- * Copyright (C) 1995, 1996, 1997 Olaf Kirch <okir@monad.swb.de>
- */
-
-#ifndef _LINUX_NFSD_FH_H
-#define _LINUX_NFSD_FH_H
-
-#include <linux/types.h>
-#include <linux/nfs.h>
-#include <linux/nfs2.h>
-#include <linux/nfs3.h>
-#include <linux/nfs4.h>
-#ifdef __KERNEL__
-# include <linux/sunrpc/svc.h>
-#endif
-
-/*
- * This is the old "dentry style" Linux NFSv2 file handle.
- *
- * The xino and xdev fields are currently used to transport the
- * ino/dev of the exported inode.
- */
-struct nfs_fhbase_old {
-	__u32		fb_dcookie;	/* dentry cookie - always 0xfeebbaca */
-	__u32		fb_ino;		/* our inode number */
-	__u32		fb_dirino;	/* dir inode number, 0 for directories */
-	__u32		fb_dev;		/* our device */
-	__u32		fb_xdev;
-	__u32		fb_xino;
-	__u32		fb_generation;
-};
-
-/*
- * This is the new flexible, extensible style NFSv2/v3 file handle.
- * by Neil Brown <neilb@cse.unsw.edu.au> - March 2000
- *
- * The file handle starts with a sequence of four-byte words.
- * The first word contains a version number (1) and three descriptor bytes
- * that tell how the remaining 3 variable length fields should be handled.
- * These three bytes are auth_type, fsid_type and fileid_type.
- *
- * All four-byte values are in host-byte-order.
- *
- * The auth_type field specifies how the filehandle can be authenticated
- * This might allow a file to be confirmed to be in a writable part of a
- * filetree without checking the path from it up to the root.
- * Current values:
- *     0  - No authentication.  fb_auth is 0 bytes long
- * Possible future values:
- *     1  - 4 bytes taken from MD5 hash of the remainer of the file handle
- *          prefixed by a secret and with the important export flags.
- *
- * The fsid_type identifies how the filesystem (or export point) is
- *    encoded.
- *  Current values:
- *     0  - 4 byte device id (ms-2-bytes major, ls-2-bytes minor), 4byte inode number
- *        NOTE: we cannot use the kdev_t device id value, because kdev_t.h
- *              says we mustn't.  We must break it up and reassemble.
- *     1  - 4 byte user specified identifier
- *     2  - 4 byte major, 4 byte minor, 4 byte inode number - DEPRECATED
- *     3  - 4 byte device id, encoded for user-space, 4 byte inode number
- *     4  - 4 byte inode number and 4 byte uuid
- *     5  - 8 byte uuid
- *     6  - 16 byte uuid
- *     7  - 8 byte inode number and 16 byte uuid
- *
- * The fileid_type identified how the file within the filesystem is encoded.
- * This is (will be) passed to, and set by, the underlying filesystem if it supports
- * filehandle operations.  The filesystem must not use the value '0' or '0xff' and may
- * only use the values 1 and 2 as defined below:
- *  Current values:
- *    0   - The root, or export point, of the filesystem.  fb_fileid is 0 bytes.
- *    1   - 32bit inode number, 32 bit generation number.
- *    2   - 32bit inode number, 32 bit generation number, 32 bit parent directory inode number.
- *
- */
-struct nfs_fhbase_new {
-	__u8		fb_version;	/* == 1, even => nfs_fhbase_old */
-	__u8		fb_auth_type;
-	__u8		fb_fsid_type;
-	__u8		fb_fileid_type;
-	__u32		fb_auth[1];
-/*	__u32		fb_fsid[0]; floating */
-/*	__u32		fb_fileid[0]; floating */
-};
-
-struct knfsd_fh {
-	unsigned int	fh_size;	/* significant for NFSv3.
-					 * Points to the current size while building
-					 * a new file handle
-					 */
-	union {
-		struct nfs_fhbase_old	fh_old;
-		__u32			fh_pad[NFS4_FHSIZE/4];
-		struct nfs_fhbase_new	fh_new;
-	} fh_base;
-};
-
-#define ofh_dcookie		fh_base.fh_old.fb_dcookie
-#define ofh_ino			fh_base.fh_old.fb_ino
-#define ofh_dirino		fh_base.fh_old.fb_dirino
-#define ofh_dev			fh_base.fh_old.fb_dev
-#define ofh_xdev		fh_base.fh_old.fb_xdev
-#define ofh_xino		fh_base.fh_old.fb_xino
-#define ofh_generation		fh_base.fh_old.fb_generation
-
-#define	fh_version		fh_base.fh_new.fb_version
-#define	fh_fsid_type		fh_base.fh_new.fb_fsid_type
-#define	fh_auth_type		fh_base.fh_new.fb_auth_type
-#define	fh_fileid_type		fh_base.fh_new.fb_fileid_type
-#define	fh_auth			fh_base.fh_new.fb_auth
-#define	fh_fsid			fh_base.fh_new.fb_auth
-
-#ifdef __KERNEL__
-
-static inline __u32 ino_t_to_u32(ino_t ino)
-{
-	return (__u32) ino;
-}
-
-static inline ino_t u32_to_ino_t(__u32 uino)
-{
-	return (ino_t) uino;
-}
-
-/*
- * This is the internal representation of an NFS handle used in knfsd.
- * pre_mtime/post_version will be used to support wcc_attr's in NFSv3.
- */
-typedef struct svc_fh {
-	struct knfsd_fh		fh_handle;	/* FH data */
-	struct dentry *		fh_dentry;	/* validated dentry */
-	struct svc_export *	fh_export;	/* export pointer */
-	int			fh_maxsize;	/* max size for fh_handle */
-
-	unsigned char		fh_locked;	/* inode locked by us */
-
-#ifdef CONFIG_NFSD_V3
-	unsigned char		fh_post_saved;	/* post-op attrs saved */
-	unsigned char		fh_pre_saved;	/* pre-op attrs saved */
-
-	/* Pre-op attributes saved during fh_lock */
-	__u64			fh_pre_size;	/* size before operation */
-	struct timespec		fh_pre_mtime;	/* mtime before oper */
-	struct timespec		fh_pre_ctime;	/* ctime before oper */
-	/*
-	 * pre-op nfsv4 change attr: note must check IS_I_VERSION(inode)
-	 *  to find out if it is valid.
-	 */
-	u64			fh_pre_change;
-
-	/* Post-op attributes saved in fh_unlock */
-	struct kstat		fh_post_attr;	/* full attrs after operation */
-	u64			fh_post_change; /* nfsv4 change; see above */
-#endif /* CONFIG_NFSD_V3 */
-
-} svc_fh;
-
-#endif /* __KERNEL__ */
-
-
-#endif /* _LINUX_NFSD_FH_H */
diff --git a/ANDROID_3.4.5/include/linux/nfsd/stats.h b/ANDROID_3.4.5/include/linux/nfsd/stats.h
deleted file mode 100644
index 2693ef64..00000000
--- a/ANDROID_3.4.5/include/linux/nfsd/stats.h
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
- * linux/include/linux/nfsd/stats.h
- *
- * Statistics for NFS server.
- *
- * Copyright (C) 1995, 1996 Olaf Kirch <okir@monad.swb.de>
- */
-
-#ifndef LINUX_NFSD_STATS_H
-#define LINUX_NFSD_STATS_H
-
-#include <linux/nfs4.h>
-
-/* thread usage wraps very million seconds (approx one fortnight) */
-#define	NFSD_USAGE_WRAP	(HZ*1000000)
-
-#ifdef __KERNEL__
-
-struct nfsd_stats {
-	unsigned int	rchits;		/* repcache hits */
-	unsigned int	rcmisses;	/* repcache hits */
-	unsigned int	rcnocache;	/* uncached reqs */
-	unsigned int	fh_stale;	/* FH stale error */
-	unsigned int	fh_lookup;	/* dentry cached */
-	unsigned int	fh_anon;	/* anon file dentry returned */
-	unsigned int	fh_nocache_dir;	/* filehandle not found in dcache */
-	unsigned int	fh_nocache_nondir;	/* filehandle not found in dcache */
-	unsigned int	io_read;	/* bytes returned to read requests */
-	unsigned int	io_write;	/* bytes passed in write requests */
-	unsigned int	th_cnt;		/* number of available threads */
-	unsigned int	th_usage[10];	/* number of ticks during which n perdeciles
-					 * of available threads were in use */
-	unsigned int	th_fullcnt;	/* number of times last free thread was used */
-	unsigned int	ra_size;	/* size of ra cache */
-	unsigned int	ra_depth[11];	/* number of times ra entry was found that deep
-					 * in the cache (10percentiles). [10] = not found */
-#ifdef CONFIG_NFSD_V4
-	unsigned int	nfs4_opcount[LAST_NFS4_OP + 1];	/* count of individual nfsv4 operations */
-#endif
-
-};
-
-
-extern struct nfsd_stats	nfsdstats;
-extern struct svc_stat		nfsd_svcstats;
-
-void	nfsd_stat_init(void);
-void	nfsd_stat_shutdown(void);
-
-#endif /* __KERNEL__ */
-#endif /* LINUX_NFSD_STATS_H */
diff --git a/ANDROID_3.4.5/include/linux/nilfs2_fs.h b/ANDROID_3.4.5/include/linux/nilfs2_fs.h
deleted file mode 100644
index 89bd4a4d..00000000
--- a/ANDROID_3.4.5/include/linux/nilfs2_fs.h
+++ /dev/null
@@ -1,852 +0,0 @@
-/*
- * nilfs2_fs.h - NILFS2 on-disk structures and common declarations.
- *
- * Copyright (C) 2005-2008 Nippon Telegraph and Telephone Corporation.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU Lesser General Public License as published
- * by the Free Software Foundation; either version 2.1 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU Lesser General Public License for more details.
- *
- * You should have received a copy of the GNU Lesser General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- *
- * Written by Koji Sato <koji@osrg.net>
- *            Ryusuke Konishi <ryusuke@osrg.net>
- */
-/*
- *  linux/include/linux/ext2_fs.h
- *
- * Copyright (C) 1992, 1993, 1994, 1995
- * Remy Card (card@masi.ibp.fr)
- * Laboratoire MASI - Institut Blaise Pascal
- * Universite Pierre et Marie Curie (Paris VI)
- *
- *  from
- *
- *  linux/include/linux/minix_fs.h
- *
- *  Copyright (C) 1991, 1992  Linus Torvalds
- */
-
-#ifndef _LINUX_NILFS_FS_H
-#define _LINUX_NILFS_FS_H
-
-#include <linux/types.h>
-#include <linux/ioctl.h>
-#include <linux/magic.h>
-#include <linux/bug.h>
-
-
-#define NILFS_INODE_BMAP_SIZE	7
-/**
- * struct nilfs_inode - structure of an inode on disk
- * @i_blocks: blocks count
- * @i_size: size in bytes
- * @i_ctime: creation time (seconds)
- * @i_mtime: modification time (seconds)
- * @i_ctime_nsec: creation time (nano seconds)
- * @i_mtime_nsec: modification time (nano seconds)
- * @i_uid: user id
- * @i_gid: group id
- * @i_mode: file mode
- * @i_links_count: links count
- * @i_flags: file flags
- * @i_bmap: block mapping
- * @i_xattr: extended attributes
- * @i_generation: file generation (for NFS)
- * @i_pad:	padding
- */
-struct nilfs_inode {
-	__le64	i_blocks;
-	__le64	i_size;
-	__le64	i_ctime;
-	__le64	i_mtime;
-	__le32	i_ctime_nsec;
-	__le32	i_mtime_nsec;
-	__le32	i_uid;
-	__le32	i_gid;
-	__le16	i_mode;
-	__le16	i_links_count;
-	__le32	i_flags;
-	__le64	i_bmap[NILFS_INODE_BMAP_SIZE];
-#define i_device_code	i_bmap[0]
-	__le64	i_xattr;
-	__le32	i_generation;
-	__le32	i_pad;
-};
-
-/**
- * struct nilfs_super_root - structure of super root
- * @sr_sum: check sum
- * @sr_bytes: byte count of the structure
- * @sr_flags: flags (reserved)
- * @sr_nongc_ctime: write time of the last segment not for cleaner operation
- * @sr_dat: DAT file inode
- * @sr_cpfile: checkpoint file inode
- * @sr_sufile: segment usage file inode
- */
-struct nilfs_super_root {
-	__le32 sr_sum;
-	__le16 sr_bytes;
-	__le16 sr_flags;
-	__le64 sr_nongc_ctime;
-	struct nilfs_inode sr_dat;
-	struct nilfs_inode sr_cpfile;
-	struct nilfs_inode sr_sufile;
-};
-
-#define NILFS_SR_MDT_OFFSET(inode_size, i)  \
-	((unsigned long)&((struct nilfs_super_root *)0)->sr_dat + \
-			(inode_size) * (i))
-#define NILFS_SR_DAT_OFFSET(inode_size)     NILFS_SR_MDT_OFFSET(inode_size, 0)
-#define NILFS_SR_CPFILE_OFFSET(inode_size)  NILFS_SR_MDT_OFFSET(inode_size, 1)
-#define NILFS_SR_SUFILE_OFFSET(inode_size)  NILFS_SR_MDT_OFFSET(inode_size, 2)
-#define NILFS_SR_BYTES(inode_size)	    NILFS_SR_MDT_OFFSET(inode_size, 3)
-
-/*
- * Maximal mount counts
- */
-#define NILFS_DFL_MAX_MNT_COUNT		50      /* 50 mounts */
-
-/*
- * File system states (sbp->s_state, nilfs->ns_mount_state)
- */
-#define NILFS_VALID_FS			0x0001  /* Unmounted cleanly */
-#define NILFS_ERROR_FS			0x0002  /* Errors detected */
-#define NILFS_RESIZE_FS			0x0004	/* Resize required */
-
-/*
- * Mount flags (sbi->s_mount_opt)
- */
-#define NILFS_MOUNT_ERROR_MODE		0x0070  /* Error mode mask */
-#define NILFS_MOUNT_ERRORS_CONT		0x0010  /* Continue on errors */
-#define NILFS_MOUNT_ERRORS_RO		0x0020  /* Remount fs ro on errors */
-#define NILFS_MOUNT_ERRORS_PANIC	0x0040  /* Panic on errors */
-#define NILFS_MOUNT_BARRIER		0x1000  /* Use block barriers */
-#define NILFS_MOUNT_STRICT_ORDER	0x2000  /* Apply strict in-order
-						   semantics also for data */
-#define NILFS_MOUNT_NORECOVERY		0x4000  /* Disable write access during
-						   mount-time recovery */
-#define NILFS_MOUNT_DISCARD		0x8000  /* Issue DISCARD requests */
-
-
-/**
- * struct nilfs_super_block - structure of super block on disk
- */
-struct nilfs_super_block {
-/*00*/	__le32	s_rev_level;		/* Revision level */
-	__le16	s_minor_rev_level;	/* minor revision level */
-	__le16	s_magic;		/* Magic signature */
-
-	__le16  s_bytes;		/* Bytes count of CRC calculation
-					   for this structure. s_reserved
-					   is excluded. */
-	__le16  s_flags;		/* flags */
-	__le32  s_crc_seed;		/* Seed value of CRC calculation */
-/*10*/	__le32	s_sum;			/* Check sum of super block */
-
-	__le32	s_log_block_size;	/* Block size represented as follows
-					   blocksize =
-					       1 << (s_log_block_size + 10) */
-	__le64  s_nsegments;		/* Number of segments in filesystem */
-/*20*/	__le64  s_dev_size;		/* block device size in bytes */
-	__le64	s_first_data_block;	/* 1st seg disk block number */
-/*30*/	__le32  s_blocks_per_segment;   /* number of blocks per full segment */
-	__le32	s_r_segments_percentage; /* Reserved segments percentage */
-
-	__le64  s_last_cno;		/* Last checkpoint number */
-/*40*/	__le64  s_last_pseg;		/* disk block addr pseg written last */
-	__le64  s_last_seq;             /* seq. number of seg written last */
-/*50*/	__le64	s_free_blocks_count;	/* Free blocks count */
-
-	__le64	s_ctime;		/* Creation time (execution time of
-					   newfs) */
-/*60*/	__le64	s_mtime;		/* Mount time */
-	__le64	s_wtime;		/* Write time */
-/*70*/	__le16	s_mnt_count;		/* Mount count */
-	__le16	s_max_mnt_count;	/* Maximal mount count */
-	__le16	s_state;		/* File system state */
-	__le16	s_errors;		/* Behaviour when detecting errors */
-	__le64	s_lastcheck;		/* time of last check */
-
-/*80*/	__le32	s_checkinterval;	/* max. time between checks */
-	__le32	s_creator_os;		/* OS */
-	__le16	s_def_resuid;		/* Default uid for reserved blocks */
-	__le16	s_def_resgid;		/* Default gid for reserved blocks */
-	__le32	s_first_ino;		/* First non-reserved inode */
-
-/*90*/	__le16  s_inode_size;		/* Size of an inode */
-	__le16  s_dat_entry_size;       /* Size of a dat entry */
-	__le16  s_checkpoint_size;      /* Size of a checkpoint */
-	__le16	s_segment_usage_size;	/* Size of a segment usage */
-
-/*98*/	__u8	s_uuid[16];		/* 128-bit uuid for volume */
-/*A8*/	char	s_volume_name[80];	/* volume name */
-
-/*F8*/	__le32  s_c_interval;           /* Commit interval of segment */
-	__le32  s_c_block_max;          /* Threshold of data amount for
-					   the segment construction */
-/*100*/	__le64  s_feature_compat;	/* Compatible feature set */
-	__le64  s_feature_compat_ro;	/* Read-only compatible feature set */
-	__le64  s_feature_incompat;	/* Incompatible feature set */
-	__u32	s_reserved[186];	/* padding to the end of the block */
-};
-
-/*
- * Codes for operating systems
- */
-#define NILFS_OS_LINUX		0
-/* Codes from 1 to 4 are reserved to keep compatibility with ext2 creator-OS */
-
-/*
- * Revision levels
- */
-#define NILFS_CURRENT_REV	2	/* current major revision */
-#define NILFS_MINOR_REV		0	/* minor revision */
-#define NILFS_MIN_SUPP_REV	2	/* minimum supported revision */
-
-/*
- * Feature set definitions
- *
- * If there is a bit set in the incompatible feature set that the kernel
- * doesn't know about, it should refuse to mount the filesystem.
- */
-#define NILFS_FEATURE_COMPAT_RO_BLOCK_COUNT	0x00000001ULL
-
-#define NILFS_FEATURE_COMPAT_SUPP	0ULL
-#define NILFS_FEATURE_COMPAT_RO_SUPP	NILFS_FEATURE_COMPAT_RO_BLOCK_COUNT
-#define NILFS_FEATURE_INCOMPAT_SUPP	0ULL
-
-/*
- * Bytes count of super_block for CRC-calculation
- */
-#define NILFS_SB_BYTES  \
-	((long)&((struct nilfs_super_block *)0)->s_reserved)
-
-/*
- * Special inode number
- */
-#define NILFS_ROOT_INO		2	/* Root file inode */
-#define NILFS_DAT_INO		3	/* DAT file */
-#define NILFS_CPFILE_INO	4	/* checkpoint file */
-#define NILFS_SUFILE_INO	5	/* segment usage file */
-#define NILFS_IFILE_INO		6	/* ifile */
-#define NILFS_ATIME_INO		7	/* Atime file (reserved) */
-#define NILFS_XATTR_INO		8	/* Xattribute file (reserved) */
-#define NILFS_SKETCH_INO	10	/* Sketch file */
-#define NILFS_USER_INO		11	/* Fisrt user's file inode number */
-
-#define NILFS_SB_OFFSET_BYTES	1024	/* byte offset of nilfs superblock */
-
-#define NILFS_SEG_MIN_BLOCKS	16	/* Minimum number of blocks in
-					   a full segment */
-#define NILFS_PSEG_MIN_BLOCKS	2	/* Minimum number of blocks in
-					   a partial segment */
-#define NILFS_MIN_NRSVSEGS	8	/* Minimum number of reserved
-					   segments */
-
-/*
- * We call DAT, cpfile, and sufile root metadata files.  Inodes of
- * these files are written in super root block instead of ifile, and
- * garbage collector doesn't keep any past versions of these files.
- */
-#define NILFS_ROOT_METADATA_FILE(ino) \
-	((ino) >= NILFS_DAT_INO && (ino) <= NILFS_SUFILE_INO)
-
-/*
- * bytes offset of secondary super block
- */
-#define NILFS_SB2_OFFSET_BYTES(devsize)	((((devsize) >> 12) - 1) << 12)
-
-/*
- * Maximal count of links to a file
- */
-#define NILFS_LINK_MAX		32000
-
-/*
- * Structure of a directory entry
- *  (Same as ext2)
- */
-
-#define NILFS_NAME_LEN 255
-
-/*
- * Block size limitations
- */
-#define NILFS_MIN_BLOCK_SIZE		1024
-#define NILFS_MAX_BLOCK_SIZE		65536
-
-/*
- * The new version of the directory entry.  Since V0 structures are
- * stored in intel byte order, and the name_len field could never be
- * bigger than 255 chars, it's safe to reclaim the extra byte for the
- * file_type field.
- */
-struct nilfs_dir_entry {
-	__le64	inode;			/* Inode number */
-	__le16	rec_len;		/* Directory entry length */
-	__u8	name_len;		/* Name length */
-	__u8	file_type;
-	char	name[NILFS_NAME_LEN];	/* File name */
-	char    pad;
-};
-
-/*
- * NILFS directory file types.  Only the low 3 bits are used.  The
- * other bits are reserved for now.
- */
-enum {
-	NILFS_FT_UNKNOWN,
-	NILFS_FT_REG_FILE,
-	NILFS_FT_DIR,
-	NILFS_FT_CHRDEV,
-	NILFS_FT_BLKDEV,
-	NILFS_FT_FIFO,
-	NILFS_FT_SOCK,
-	NILFS_FT_SYMLINK,
-	NILFS_FT_MAX
-};
-
-/*
- * NILFS_DIR_PAD defines the directory entries boundaries
- *
- * NOTE: It must be a multiple of 8
- */
-#define NILFS_DIR_PAD			8
-#define NILFS_DIR_ROUND			(NILFS_DIR_PAD - 1)
-#define NILFS_DIR_REC_LEN(name_len)	(((name_len) + 12 + NILFS_DIR_ROUND) & \
-					~NILFS_DIR_ROUND)
-#define NILFS_MAX_REC_LEN		((1<<16)-1)
-
-static inline unsigned nilfs_rec_len_from_disk(__le16 dlen)
-{
-	unsigned len = le16_to_cpu(dlen);
-
-#if !defined(__KERNEL__) || (PAGE_CACHE_SIZE >= 65536)
-	if (len == NILFS_MAX_REC_LEN)
-		return 1 << 16;
-#endif
-	return len;
-}
-
-static inline __le16 nilfs_rec_len_to_disk(unsigned len)
-{
-#if !defined(__KERNEL__) || (PAGE_CACHE_SIZE >= 65536)
-	if (len == (1 << 16))
-		return cpu_to_le16(NILFS_MAX_REC_LEN);
-	else if (len > (1 << 16))
-		BUG();
-#endif
-	return cpu_to_le16(len);
-}
-
-/**
- * struct nilfs_finfo - file information
- * @fi_ino: inode number
- * @fi_cno: checkpoint number
- * @fi_nblocks: number of blocks (including intermediate blocks)
- * @fi_ndatablk: number of file data blocks
- */
-struct nilfs_finfo {
-	__le64 fi_ino;
-	__le64 fi_cno;
-	__le32 fi_nblocks;
-	__le32 fi_ndatablk;
-	/* array of virtual block numbers */
-};
-
-/**
- * struct nilfs_binfo_v - information for the block to which a virtual block number is assigned
- * @bi_vblocknr: virtual block number
- * @bi_blkoff: block offset
- */
-struct nilfs_binfo_v {
-	__le64 bi_vblocknr;
-	__le64 bi_blkoff;
-};
-
-/**
- * struct nilfs_binfo_dat - information for the block which belongs to the DAT file
- * @bi_blkoff: block offset
- * @bi_level: level
- * @bi_pad: padding
- */
-struct nilfs_binfo_dat {
-	__le64 bi_blkoff;
-	__u8 bi_level;
-	__u8 bi_pad[7];
-};
-
-/**
- * union nilfs_binfo: block information
- * @bi_v: nilfs_binfo_v structure
- * @bi_dat: nilfs_binfo_dat structure
- */
-union nilfs_binfo {
-	struct nilfs_binfo_v bi_v;
-	struct nilfs_binfo_dat bi_dat;
-};
-
-/**
- * struct nilfs_segment_summary - segment summary
- * @ss_datasum: checksum of data
- * @ss_sumsum: checksum of segment summary
- * @ss_magic: magic number
- * @ss_bytes: size of this structure in bytes
- * @ss_flags: flags
- * @ss_seq: sequence number
- * @ss_create: creation timestamp
- * @ss_next: next segment
- * @ss_nblocks: number of blocks
- * @ss_nfinfo: number of finfo structures
- * @ss_sumbytes: total size of segment summary in bytes
- * @ss_pad: padding
- * @ss_cno: checkpoint number
- */
-struct nilfs_segment_summary {
-	__le32 ss_datasum;
-	__le32 ss_sumsum;
-	__le32 ss_magic;
-	__le16 ss_bytes;
-	__le16 ss_flags;
-	__le64 ss_seq;
-	__le64 ss_create;
-	__le64 ss_next;
-	__le32 ss_nblocks;
-	__le32 ss_nfinfo;
-	__le32 ss_sumbytes;
-	__le32 ss_pad;
-	__le64 ss_cno;
-	/* array of finfo structures */
-};
-
-#define NILFS_SEGSUM_MAGIC	0x1eaffa11  /* segment summary magic number */
-
-/*
- * Segment summary flags
- */
-#define NILFS_SS_LOGBGN 0x0001  /* begins a logical segment */
-#define NILFS_SS_LOGEND 0x0002  /* ends a logical segment */
-#define NILFS_SS_SR     0x0004  /* has super root */
-#define NILFS_SS_SYNDT  0x0008  /* includes data only updates */
-#define NILFS_SS_GC     0x0010  /* segment written for cleaner operation */
-
-/**
- * struct nilfs_btree_node - B-tree node
- * @bn_flags: flags
- * @bn_level: level
- * @bn_nchildren: number of children
- * @bn_pad: padding
- */
-struct nilfs_btree_node {
-	__u8 bn_flags;
-	__u8 bn_level;
-	__le16 bn_nchildren;
-	__le32 bn_pad;
-};
-
-/* flags */
-#define NILFS_BTREE_NODE_ROOT   0x01
-
-/* level */
-#define NILFS_BTREE_LEVEL_DATA          0
-#define NILFS_BTREE_LEVEL_NODE_MIN      (NILFS_BTREE_LEVEL_DATA + 1)
-#define NILFS_BTREE_LEVEL_MAX           14
-
-/**
- * struct nilfs_palloc_group_desc - block group descriptor
- * @pg_nfrees: number of free entries in block group
- */
-struct nilfs_palloc_group_desc {
-	__le32 pg_nfrees;
-};
-
-/**
- * struct nilfs_dat_entry - disk address translation entry
- * @de_blocknr: block number
- * @de_start: start checkpoint number
- * @de_end: end checkpoint number
- * @de_rsv: reserved for future use
- */
-struct nilfs_dat_entry {
-	__le64 de_blocknr;
-	__le64 de_start;
-	__le64 de_end;
-	__le64 de_rsv;
-};
-
-/**
- * struct nilfs_snapshot_list - snapshot list
- * @ssl_next: next checkpoint number on snapshot list
- * @ssl_prev: previous checkpoint number on snapshot list
- */
-struct nilfs_snapshot_list {
-	__le64 ssl_next;
-	__le64 ssl_prev;
-};
-
-/**
- * struct nilfs_checkpoint - checkpoint structure
- * @cp_flags: flags
- * @cp_checkpoints_count: checkpoints count in a block
- * @cp_snapshot_list: snapshot list
- * @cp_cno: checkpoint number
- * @cp_create: creation timestamp
- * @cp_nblk_inc: number of blocks incremented by this checkpoint
- * @cp_inodes_count: inodes count
- * @cp_blocks_count: blocks count
- * @cp_ifile_inode: inode of ifile
- */
-struct nilfs_checkpoint {
-	__le32 cp_flags;
-	__le32 cp_checkpoints_count;
-	struct nilfs_snapshot_list cp_snapshot_list;
-	__le64 cp_cno;
-	__le64 cp_create;
-	__le64 cp_nblk_inc;
-	__le64 cp_inodes_count;
-	__le64 cp_blocks_count;
-
-	/* Do not change the byte offset of ifile inode.
-	   To keep the compatibility of the disk format,
-	   additional fields should be added behind cp_ifile_inode. */
-	struct nilfs_inode cp_ifile_inode;
-};
-
-/* checkpoint flags */
-enum {
-	NILFS_CHECKPOINT_SNAPSHOT,
-	NILFS_CHECKPOINT_INVALID,
-	NILFS_CHECKPOINT_SKETCH,
-	NILFS_CHECKPOINT_MINOR,
-};
-
-#define NILFS_CHECKPOINT_FNS(flag, name)				\
-static inline void							\
-nilfs_checkpoint_set_##name(struct nilfs_checkpoint *cp)		\
-{									\
-	cp->cp_flags = cpu_to_le32(le32_to_cpu(cp->cp_flags) |		\
-				   (1UL << NILFS_CHECKPOINT_##flag));	\
-}									\
-static inline void							\
-nilfs_checkpoint_clear_##name(struct nilfs_checkpoint *cp)		\
-{									\
-	cp->cp_flags = cpu_to_le32(le32_to_cpu(cp->cp_flags) &		\
-				   ~(1UL << NILFS_CHECKPOINT_##flag));	\
-}									\
-static inline int							\
-nilfs_checkpoint_##name(const struct nilfs_checkpoint *cp)		\
-{									\
-	return !!(le32_to_cpu(cp->cp_flags) &				\
-		  (1UL << NILFS_CHECKPOINT_##flag));			\
-}
-
-NILFS_CHECKPOINT_FNS(SNAPSHOT, snapshot)
-NILFS_CHECKPOINT_FNS(INVALID, invalid)
-NILFS_CHECKPOINT_FNS(MINOR, minor)
-
-/**
- * struct nilfs_cpinfo - checkpoint information
- * @ci_flags: flags
- * @ci_pad: padding
- * @ci_cno: checkpoint number
- * @ci_create: creation timestamp
- * @ci_nblk_inc: number of blocks incremented by this checkpoint
- * @ci_inodes_count: inodes count
- * @ci_blocks_count: blocks count
- * @ci_next: next checkpoint number in snapshot list
- */
-struct nilfs_cpinfo {
-	__u32 ci_flags;
-	__u32 ci_pad;
-	__u64 ci_cno;
-	__u64 ci_create;
-	__u64 ci_nblk_inc;
-	__u64 ci_inodes_count;
-	__u64 ci_blocks_count;
-	__u64 ci_next;
-};
-
-#define NILFS_CPINFO_FNS(flag, name)					\
-static inline int							\
-nilfs_cpinfo_##name(const struct nilfs_cpinfo *cpinfo)			\
-{									\
-	return !!(cpinfo->ci_flags & (1UL << NILFS_CHECKPOINT_##flag));	\
-}
-
-NILFS_CPINFO_FNS(SNAPSHOT, snapshot)
-NILFS_CPINFO_FNS(INVALID, invalid)
-NILFS_CPINFO_FNS(MINOR, minor)
-
-
-/**
- * struct nilfs_cpfile_header - checkpoint file header
- * @ch_ncheckpoints: number of checkpoints
- * @ch_nsnapshots: number of snapshots
- * @ch_snapshot_list: snapshot list
- */
-struct nilfs_cpfile_header {
-	__le64 ch_ncheckpoints;
-	__le64 ch_nsnapshots;
-	struct nilfs_snapshot_list ch_snapshot_list;
-};
-
-#define NILFS_CPFILE_FIRST_CHECKPOINT_OFFSET	\
-	((sizeof(struct nilfs_cpfile_header) +				\
-	  sizeof(struct nilfs_checkpoint) - 1) /			\
-			sizeof(struct nilfs_checkpoint))
-
-/**
- * struct nilfs_segment_usage - segment usage
- * @su_lastmod: last modified timestamp
- * @su_nblocks: number of blocks in segment
- * @su_flags: flags
- */
-struct nilfs_segment_usage {
-	__le64 su_lastmod;
-	__le32 su_nblocks;
-	__le32 su_flags;
-};
-
-/* segment usage flag */
-enum {
-	NILFS_SEGMENT_USAGE_ACTIVE,
-	NILFS_SEGMENT_USAGE_DIRTY,
-	NILFS_SEGMENT_USAGE_ERROR,
-
-	/* ... */
-};
-
-#define NILFS_SEGMENT_USAGE_FNS(flag, name)				\
-static inline void							\
-nilfs_segment_usage_set_##name(struct nilfs_segment_usage *su)		\
-{									\
-	su->su_flags = cpu_to_le32(le32_to_cpu(su->su_flags) |		\
-				   (1UL << NILFS_SEGMENT_USAGE_##flag));\
-}									\
-static inline void							\
-nilfs_segment_usage_clear_##name(struct nilfs_segment_usage *su)	\
-{									\
-	su->su_flags =							\
-		cpu_to_le32(le32_to_cpu(su->su_flags) &			\
-			    ~(1UL << NILFS_SEGMENT_USAGE_##flag));      \
-}									\
-static inline int							\
-nilfs_segment_usage_##name(const struct nilfs_segment_usage *su)	\
-{									\
-	return !!(le32_to_cpu(su->su_flags) &				\
-		  (1UL << NILFS_SEGMENT_USAGE_##flag));			\
-}
-
-NILFS_SEGMENT_USAGE_FNS(ACTIVE, active)
-NILFS_SEGMENT_USAGE_FNS(DIRTY, dirty)
-NILFS_SEGMENT_USAGE_FNS(ERROR, error)
-
-static inline void
-nilfs_segment_usage_set_clean(struct nilfs_segment_usage *su)
-{
-	su->su_lastmod = cpu_to_le64(0);
-	su->su_nblocks = cpu_to_le32(0);
-	su->su_flags = cpu_to_le32(0);
-}
-
-static inline int
-nilfs_segment_usage_clean(const struct nilfs_segment_usage *su)
-{
-	return !le32_to_cpu(su->su_flags);
-}
-
-/**
- * struct nilfs_sufile_header - segment usage file header
- * @sh_ncleansegs: number of clean segments
- * @sh_ndirtysegs: number of dirty segments
- * @sh_last_alloc: last allocated segment number
- */
-struct nilfs_sufile_header {
-	__le64 sh_ncleansegs;
-	__le64 sh_ndirtysegs;
-	__le64 sh_last_alloc;
-	/* ... */
-};
-
-#define NILFS_SUFILE_FIRST_SEGMENT_USAGE_OFFSET	\
-	((sizeof(struct nilfs_sufile_header) +				\
-	  sizeof(struct nilfs_segment_usage) - 1) /			\
-			 sizeof(struct nilfs_segment_usage))
-
-/**
- * nilfs_suinfo - segment usage information
- * @sui_lastmod:
- * @sui_nblocks:
- * @sui_flags:
- */
-struct nilfs_suinfo {
-	__u64 sui_lastmod;
-	__u32 sui_nblocks;
-	__u32 sui_flags;
-};
-
-#define NILFS_SUINFO_FNS(flag, name)					\
-static inline int							\
-nilfs_suinfo_##name(const struct nilfs_suinfo *si)			\
-{									\
-	return si->sui_flags & (1UL << NILFS_SEGMENT_USAGE_##flag);	\
-}
-
-NILFS_SUINFO_FNS(ACTIVE, active)
-NILFS_SUINFO_FNS(DIRTY, dirty)
-NILFS_SUINFO_FNS(ERROR, error)
-
-static inline int nilfs_suinfo_clean(const struct nilfs_suinfo *si)
-{
-	return !si->sui_flags;
-}
-
-/* ioctl */
-enum {
-	NILFS_CHECKPOINT,
-	NILFS_SNAPSHOT,
-};
-
-/**
- * struct nilfs_cpmode -
- * @cc_cno:
- * @cc_mode:
- */
-struct nilfs_cpmode {
-	__u64 cm_cno;
-	__u32 cm_mode;
-	__u32 cm_pad;
-};
-
-/**
- * struct nilfs_argv - argument vector
- * @v_base:
- * @v_nmembs:
- * @v_size:
- * @v_flags:
- * @v_index:
- */
-struct nilfs_argv {
-	__u64 v_base;
-	__u32 v_nmembs;	/* number of members */
-	__u16 v_size;	/* size of members */
-	__u16 v_flags;
-	__u64 v_index;
-};
-
-/**
- * struct nilfs_period -
- * @p_start:
- * @p_end:
- */
-struct nilfs_period {
-	__u64 p_start;
-	__u64 p_end;
-};
-
-/**
- * struct nilfs_cpstat -
- * @cs_cno: checkpoint number
- * @cs_ncps: number of checkpoints
- * @cs_nsss: number of snapshots
- */
-struct nilfs_cpstat {
-	__u64 cs_cno;
-	__u64 cs_ncps;
-	__u64 cs_nsss;
-};
-
-/**
- * struct nilfs_sustat -
- * @ss_nsegs: number of segments
- * @ss_ncleansegs: number of clean segments
- * @ss_ndirtysegs: number of dirty segments
- * @ss_ctime: creation time of the last segment
- * @ss_nongc_ctime: creation time of the last segment not for GC
- * @ss_prot_seq: least sequence number of segments which must not be reclaimed
- */
-struct nilfs_sustat {
-	__u64 ss_nsegs;
-	__u64 ss_ncleansegs;
-	__u64 ss_ndirtysegs;
-	__u64 ss_ctime;
-	__u64 ss_nongc_ctime;
-	__u64 ss_prot_seq;
-};
-
-/**
- * struct nilfs_vinfo - virtual block number information
- * @vi_vblocknr:
- * @vi_start:
- * @vi_end:
- * @vi_blocknr:
- */
-struct nilfs_vinfo {
-	__u64 vi_vblocknr;
-	__u64 vi_start;
-	__u64 vi_end;
-	__u64 vi_blocknr;
-};
-
-/**
- * struct nilfs_vdesc -
- */
-struct nilfs_vdesc {
-	__u64 vd_ino;
-	__u64 vd_cno;
-	__u64 vd_vblocknr;
-	struct nilfs_period vd_period;
-	__u64 vd_blocknr;
-	__u64 vd_offset;
-	__u32 vd_flags;
-	__u32 vd_pad;
-};
-
-/**
- * struct nilfs_bdesc -
- */
-struct nilfs_bdesc {
-	__u64 bd_ino;
-	__u64 bd_oblocknr;
-	__u64 bd_blocknr;
-	__u64 bd_offset;
-	__u32 bd_level;
-	__u32 bd_pad;
-};
-
-#define NILFS_IOCTL_IDENT		'n'
-
-#define NILFS_IOCTL_CHANGE_CPMODE  \
-	_IOW(NILFS_IOCTL_IDENT, 0x80, struct nilfs_cpmode)
-#define NILFS_IOCTL_DELETE_CHECKPOINT  \
-	_IOW(NILFS_IOCTL_IDENT, 0x81, __u64)
-#define NILFS_IOCTL_GET_CPINFO  \
-	_IOR(NILFS_IOCTL_IDENT, 0x82, struct nilfs_argv)
-#define NILFS_IOCTL_GET_CPSTAT  \
-	_IOR(NILFS_IOCTL_IDENT, 0x83, struct nilfs_cpstat)
-#define NILFS_IOCTL_GET_SUINFO  \
-	_IOR(NILFS_IOCTL_IDENT, 0x84, struct nilfs_argv)
-#define NILFS_IOCTL_GET_SUSTAT  \
-	_IOR(NILFS_IOCTL_IDENT, 0x85, struct nilfs_sustat)
-#define NILFS_IOCTL_GET_VINFO  \
-	_IOWR(NILFS_IOCTL_IDENT, 0x86, struct nilfs_argv)
-#define NILFS_IOCTL_GET_BDESCS  \
-	_IOWR(NILFS_IOCTL_IDENT, 0x87, struct nilfs_argv)
-#define NILFS_IOCTL_CLEAN_SEGMENTS  \
-	_IOW(NILFS_IOCTL_IDENT, 0x88, struct nilfs_argv[5])
-#define NILFS_IOCTL_SYNC  \
-	_IOR(NILFS_IOCTL_IDENT, 0x8A, __u64)
-#define NILFS_IOCTL_RESIZE  \
-	_IOW(NILFS_IOCTL_IDENT, 0x8B, __u64)
-#define NILFS_IOCTL_SET_ALLOC_RANGE  \
-	_IOW(NILFS_IOCTL_IDENT, 0x8C, __u64[2])
-
-#endif	/* _LINUX_NILFS_FS_H */
diff --git a/ANDROID_3.4.5/include/linux/nl80211.h b/ANDROID_3.4.5/include/linux/nl80211.h
deleted file mode 100644
index e474f6e7..00000000
--- a/ANDROID_3.4.5/include/linux/nl80211.h
+++ /dev/null
@@ -1,2866 +0,0 @@
-#ifndef __LINUX_NL80211_H
-#define __LINUX_NL80211_H
-/*
- * 802.11 netlink interface public header
- *
- * Copyright 2006-2010 Johannes Berg <johannes@sipsolutions.net>
- * Copyright 2008 Michael Wu <flamingice@sourmilk.net>
- * Copyright 2008 Luis Carlos Cobo <luisca@cozybit.com>
- * Copyright 2008 Michael Buesch <m@bues.ch>
- * Copyright 2008, 2009 Luis R. Rodriguez <lrodriguez@atheros.com>
- * Copyright 2008 Jouni Malinen <jouni.malinen@atheros.com>
- * Copyright 2008 Colin McCabe <colin@cozybit.com>
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- *
- */
-
-#include <linux/types.h>
-
-/**
- * DOC: Station handling
- *
- * Stations are added per interface, but a special case exists with VLAN
- * interfaces. When a station is bound to an AP interface, it may be moved
- * into a VLAN identified by a VLAN interface index (%NL80211_ATTR_STA_VLAN).
- * The station is still assumed to belong to the AP interface it was added
- * to.
- *
- * TODO: need more info?
- */
-
-/**
- * DOC: Frame transmission/registration support
- *
- * Frame transmission and registration support exists to allow userspace
- * management entities such as wpa_supplicant react to management frames
- * that are not being handled by the kernel. This includes, for example,
- * certain classes of action frames that cannot be handled in the kernel
- * for various reasons.
- *
- * Frame registration is done on a per-interface basis and registrations
- * cannot be removed other than by closing the socket. It is possible to
- * specify a registration filter to register, for example, only for a
- * certain type of action frame. In particular with action frames, those
- * that userspace registers for will not be returned as unhandled by the
- * driver, so that the registered application has to take responsibility
- * for doing that.
- *
- * The type of frame that can be registered for is also dependent on the
- * driver and interface type. The frame types are advertised in wiphy
- * attributes so applications know what to expect.
- *
- * NOTE: When an interface changes type while registrations are active,
- *       these registrations are ignored until the interface type is
- *       changed again. This means that changing the interface type can
- *       lead to a situation that couldn't otherwise be produced, but
- *       any such registrations will be dormant in the sense that they
- *       will not be serviced, i.e. they will not receive any frames.
- *
- * Frame transmission allows userspace to send for example the required
- * responses to action frames. It is subject to some sanity checking,
- * but many frames can be transmitted. When a frame was transmitted, its
- * status is indicated to the sending socket.
- *
- * For more technical details, see the corresponding command descriptions
- * below.
- */
-
-/**
- * DOC: Virtual interface / concurrency capabilities
- *
- * Some devices are able to operate with virtual MACs, they can have
- * more than one virtual interface. The capability handling for this
- * is a bit complex though, as there may be a number of restrictions
- * on the types of concurrency that are supported.
- *
- * To start with, each device supports the interface types listed in
- * the %NL80211_ATTR_SUPPORTED_IFTYPES attribute, but by listing the
- * types there no concurrency is implied.
- *
- * Once concurrency is desired, more attributes must be observed:
- * To start with, since some interface types are purely managed in
- * software, like the AP-VLAN type in mac80211 for example, there's
- * an additional list of these, they can be added at any time and
- * are only restricted by some semantic restrictions (e.g. AP-VLAN
- * cannot be added without a corresponding AP interface). This list
- * is exported in the %NL80211_ATTR_SOFTWARE_IFTYPES attribute.
- *
- * Further, the list of supported combinations is exported. This is
- * in the %NL80211_ATTR_INTERFACE_COMBINATIONS attribute. Basically,
- * it exports a list of "groups", and at any point in time the
- * interfaces that are currently active must fall into any one of
- * the advertised groups. Within each group, there are restrictions
- * on the number of interfaces of different types that are supported
- * and also the number of different channels, along with potentially
- * some other restrictions. See &enum nl80211_if_combination_attrs.
- *
- * All together, these attributes define the concurrency of virtual
- * interfaces that a given device supports.
- */
-
-/**
- * enum nl80211_commands - supported nl80211 commands
- *
- * @NL80211_CMD_UNSPEC: unspecified command to catch errors
- *
- * @NL80211_CMD_GET_WIPHY: request information about a wiphy or dump request
- *	to get a list of all present wiphys.
- * @NL80211_CMD_SET_WIPHY: set wiphy parameters, needs %NL80211_ATTR_WIPHY or
- *	%NL80211_ATTR_IFINDEX; can be used to set %NL80211_ATTR_WIPHY_NAME,
- *	%NL80211_ATTR_WIPHY_TXQ_PARAMS, %NL80211_ATTR_WIPHY_FREQ,
- *	%NL80211_ATTR_WIPHY_CHANNEL_TYPE, %NL80211_ATTR_WIPHY_RETRY_SHORT,
- *	%NL80211_ATTR_WIPHY_RETRY_LONG, %NL80211_ATTR_WIPHY_FRAG_THRESHOLD,
- *	and/or %NL80211_ATTR_WIPHY_RTS_THRESHOLD.
- *	However, for setting the channel, see %NL80211_CMD_SET_CHANNEL
- *	instead, the support here is for backward compatibility only.
- * @NL80211_CMD_NEW_WIPHY: Newly created wiphy, response to get request
- *	or rename notification. Has attributes %NL80211_ATTR_WIPHY and
- *	%NL80211_ATTR_WIPHY_NAME.
- * @NL80211_CMD_DEL_WIPHY: Wiphy deleted. Has attributes
- *	%NL80211_ATTR_WIPHY and %NL80211_ATTR_WIPHY_NAME.
- *
- * @NL80211_CMD_GET_INTERFACE: Request an interface's configuration;
- *	either a dump request on a %NL80211_ATTR_WIPHY or a specific get
- *	on an %NL80211_ATTR_IFINDEX is supported.
- * @NL80211_CMD_SET_INTERFACE: Set type of a virtual interface, requires
- *	%NL80211_ATTR_IFINDEX and %NL80211_ATTR_IFTYPE.
- * @NL80211_CMD_NEW_INTERFACE: Newly created virtual interface or response
- *	to %NL80211_CMD_GET_INTERFACE. Has %NL80211_ATTR_IFINDEX,
- *	%NL80211_ATTR_WIPHY and %NL80211_ATTR_IFTYPE attributes. Can also
- *	be sent from userspace to request creation of a new virtual interface,
- *	then requires attributes %NL80211_ATTR_WIPHY, %NL80211_ATTR_IFTYPE and
- *	%NL80211_ATTR_IFNAME.
- * @NL80211_CMD_DEL_INTERFACE: Virtual interface was deleted, has attributes
- *	%NL80211_ATTR_IFINDEX and %NL80211_ATTR_WIPHY. Can also be sent from
- *	userspace to request deletion of a virtual interface, then requires
- *	attribute %NL80211_ATTR_IFINDEX.
- *
- * @NL80211_CMD_GET_KEY: Get sequence counter information for a key specified
- *	by %NL80211_ATTR_KEY_IDX and/or %NL80211_ATTR_MAC.
- * @NL80211_CMD_SET_KEY: Set key attributes %NL80211_ATTR_KEY_DEFAULT,
- *	%NL80211_ATTR_KEY_DEFAULT_MGMT, or %NL80211_ATTR_KEY_THRESHOLD.
- * @NL80211_CMD_NEW_KEY: add a key with given %NL80211_ATTR_KEY_DATA,
- *	%NL80211_ATTR_KEY_IDX, %NL80211_ATTR_MAC, %NL80211_ATTR_KEY_CIPHER,
- *	and %NL80211_ATTR_KEY_SEQ attributes.
- * @NL80211_CMD_DEL_KEY: delete a key identified by %NL80211_ATTR_KEY_IDX
- *	or %NL80211_ATTR_MAC.
- *
- * @NL80211_CMD_GET_BEACON: (not used)
- * @NL80211_CMD_SET_BEACON: change the beacon on an access point interface
- *	using the %NL80211_ATTR_BEACON_HEAD and %NL80211_ATTR_BEACON_TAIL
- *	attributes. For drivers that generate the beacon and probe responses
- *	internally, the following attributes must be provided: %NL80211_ATTR_IE,
- *	%NL80211_ATTR_IE_PROBE_RESP and %NL80211_ATTR_IE_ASSOC_RESP.
- * @NL80211_CMD_START_AP: Start AP operation on an AP interface, parameters
- *	are like for %NL80211_CMD_SET_BEACON, and additionally parameters that
- *	do not change are used, these include %NL80211_ATTR_BEACON_INTERVAL,
- *	%NL80211_ATTR_DTIM_PERIOD, %NL80211_ATTR_SSID,
- *	%NL80211_ATTR_HIDDEN_SSID, %NL80211_ATTR_CIPHERS_PAIRWISE,
- *	%NL80211_ATTR_CIPHER_GROUP, %NL80211_ATTR_WPA_VERSIONS,
- *	%NL80211_ATTR_AKM_SUITES, %NL80211_ATTR_PRIVACY,
- *	%NL80211_ATTR_AUTH_TYPE and %NL80211_ATTR_INACTIVITY_TIMEOUT.
- * @NL80211_CMD_NEW_BEACON: old alias for %NL80211_CMD_START_AP
- * @NL80211_CMD_STOP_AP: Stop AP operation on the given interface
- * @NL80211_CMD_DEL_BEACON: old alias for %NL80211_CMD_STOP_AP
- *
- * @NL80211_CMD_GET_STATION: Get station attributes for station identified by
- *	%NL80211_ATTR_MAC on the interface identified by %NL80211_ATTR_IFINDEX.
- * @NL80211_CMD_SET_STATION: Set station attributes for station identified by
- *	%NL80211_ATTR_MAC on the interface identified by %NL80211_ATTR_IFINDEX.
- * @NL80211_CMD_NEW_STATION: Add a station with given attributes to the
- *	the interface identified by %NL80211_ATTR_IFINDEX.
- * @NL80211_CMD_DEL_STATION: Remove a station identified by %NL80211_ATTR_MAC
- *	or, if no MAC address given, all stations, on the interface identified
- *	by %NL80211_ATTR_IFINDEX.
- *
- * @NL80211_CMD_GET_MPATH: Get mesh path attributes for mesh path to
- * 	destination %NL80211_ATTR_MAC on the interface identified by
- * 	%NL80211_ATTR_IFINDEX.
- * @NL80211_CMD_SET_MPATH:  Set mesh path attributes for mesh path to
- * 	destination %NL80211_ATTR_MAC on the interface identified by
- * 	%NL80211_ATTR_IFINDEX.
- * @NL80211_CMD_NEW_MPATH: Create a new mesh path for the destination given by
- *	%NL80211_ATTR_MAC via %NL80211_ATTR_MPATH_NEXT_HOP.
- * @NL80211_CMD_DEL_MPATH: Delete a mesh path to the destination given by
- *	%NL80211_ATTR_MAC.
- * @NL80211_CMD_NEW_PATH: Add a mesh path with given attributes to the
- *	the interface identified by %NL80211_ATTR_IFINDEX.
- * @NL80211_CMD_DEL_PATH: Remove a mesh path identified by %NL80211_ATTR_MAC
- *	or, if no MAC address given, all mesh paths, on the interface identified
- *	by %NL80211_ATTR_IFINDEX.
- * @NL80211_CMD_SET_BSS: Set BSS attributes for BSS identified by
- *	%NL80211_ATTR_IFINDEX.
- *
- * @NL80211_CMD_GET_REG: ask the wireless core to send us its currently set
- * 	regulatory domain.
- * @NL80211_CMD_SET_REG: Set current regulatory domain. CRDA sends this command
- *	after being queried by the kernel. CRDA replies by sending a regulatory
- *	domain structure which consists of %NL80211_ATTR_REG_ALPHA set to our
- *	current alpha2 if it found a match. It also provides
- * 	NL80211_ATTR_REG_RULE_FLAGS, and a set of regulatory rules. Each
- * 	regulatory rule is a nested set of attributes  given by
- * 	%NL80211_ATTR_REG_RULE_FREQ_[START|END] and
- * 	%NL80211_ATTR_FREQ_RANGE_MAX_BW with an attached power rule given by
- * 	%NL80211_ATTR_REG_RULE_POWER_MAX_ANT_GAIN and
- * 	%NL80211_ATTR_REG_RULE_POWER_MAX_EIRP.
- * @NL80211_CMD_REQ_SET_REG: ask the wireless core to set the regulatory domain
- * 	to the specified ISO/IEC 3166-1 alpha2 country code. The core will
- * 	store this as a valid request and then query userspace for it.
- *
- * @NL80211_CMD_GET_MESH_CONFIG: Get mesh networking properties for the
- *	interface identified by %NL80211_ATTR_IFINDEX
- *
- * @NL80211_CMD_SET_MESH_CONFIG: Set mesh networking properties for the
- *      interface identified by %NL80211_ATTR_IFINDEX
- *
- * @NL80211_CMD_SET_MGMT_EXTRA_IE: Set extra IEs for management frames. The
- *	interface is identified with %NL80211_ATTR_IFINDEX and the management
- *	frame subtype with %NL80211_ATTR_MGMT_SUBTYPE. The extra IE data to be
- *	added to the end of the specified management frame is specified with
- *	%NL80211_ATTR_IE. If the command succeeds, the requested data will be
- *	added to all specified management frames generated by
- *	kernel/firmware/driver.
- *	Note: This command has been removed and it is only reserved at this
- *	point to avoid re-using existing command number. The functionality this
- *	command was planned for has been provided with cleaner design with the
- *	option to specify additional IEs in NL80211_CMD_TRIGGER_SCAN,
- *	NL80211_CMD_AUTHENTICATE, NL80211_CMD_ASSOCIATE,
- *	NL80211_CMD_DEAUTHENTICATE, and NL80211_CMD_DISASSOCIATE.
- *
- * @NL80211_CMD_GET_SCAN: get scan results
- * @NL80211_CMD_TRIGGER_SCAN: trigger a new scan with the given parameters
- *	%NL80211_ATTR_TX_NO_CCK_RATE is used to decide whether to send the
- *	probe requests at CCK rate or not.
- * @NL80211_CMD_NEW_SCAN_RESULTS: scan notification (as a reply to
- *	NL80211_CMD_GET_SCAN and on the "scan" multicast group)
- * @NL80211_CMD_SCAN_ABORTED: scan was aborted, for unspecified reasons,
- *	partial scan results may be available
- *
- * @NL80211_CMD_START_SCHED_SCAN: start a scheduled scan at certain
- *	intervals, as specified by %NL80211_ATTR_SCHED_SCAN_INTERVAL.
- *	Like with normal scans, if SSIDs (%NL80211_ATTR_SCAN_SSIDS)
- *	are passed, they are used in the probe requests.  For
- *	broadcast, a broadcast SSID must be passed (ie. an empty
- *	string).  If no SSID is passed, no probe requests are sent and
- *	a passive scan is performed.  %NL80211_ATTR_SCAN_FREQUENCIES,
- *	if passed, define which channels should be scanned; if not
- *	passed, all channels allowed for the current regulatory domain
- *	are used.  Extra IEs can also be passed from the userspace by
- *	using the %NL80211_ATTR_IE attribute.
- * @NL80211_CMD_STOP_SCHED_SCAN: stop a scheduled scan.  Returns -ENOENT
- *	if scheduled scan is not running.
- * @NL80211_CMD_SCHED_SCAN_RESULTS: indicates that there are scheduled scan
- *	results available.
- * @NL80211_CMD_SCHED_SCAN_STOPPED: indicates that the scheduled scan has
- *	stopped.  The driver may issue this event at any time during a
- *	scheduled scan.  One reason for stopping the scan is if the hardware
- *	does not support starting an association or a normal scan while running
- *	a scheduled scan.  This event is also sent when the
- *	%NL80211_CMD_STOP_SCHED_SCAN command is received or when the interface
- *	is brought down while a scheduled scan was running.
- *
- * @NL80211_CMD_GET_SURVEY: get survey resuls, e.g. channel occupation
- *      or noise level
- * @NL80211_CMD_NEW_SURVEY_RESULTS: survey data notification (as a reply to
- *	NL80211_CMD_GET_SURVEY and on the "scan" multicast group)
- *
- * @NL80211_CMD_REG_CHANGE: indicates to userspace the regulatory domain
- * 	has been changed and provides details of the request information
- * 	that caused the change such as who initiated the regulatory request
- * 	(%NL80211_ATTR_REG_INITIATOR), the wiphy_idx
- * 	(%NL80211_ATTR_REG_ALPHA2) on which the request was made from if
- * 	the initiator was %NL80211_REGDOM_SET_BY_COUNTRY_IE or
- * 	%NL80211_REGDOM_SET_BY_DRIVER, the type of regulatory domain
- * 	set (%NL80211_ATTR_REG_TYPE), if the type of regulatory domain is
- * 	%NL80211_REG_TYPE_COUNTRY the alpha2 to which we have moved on
- * 	to (%NL80211_ATTR_REG_ALPHA2).
- * @NL80211_CMD_REG_BEACON_HINT: indicates to userspace that an AP beacon
- * 	has been found while world roaming thus enabling active scan or
- * 	any mode of operation that initiates TX (beacons) on a channel
- * 	where we would not have been able to do either before. As an example
- * 	if you are world roaming (regulatory domain set to world or if your
- * 	driver is using a custom world roaming regulatory domain) and while
- * 	doing a passive scan on the 5 GHz band you find an AP there (if not
- * 	on a DFS channel) you will now be able to actively scan for that AP
- * 	or use AP mode on your card on that same channel. Note that this will
- * 	never be used for channels 1-11 on the 2 GHz band as they are always
- * 	enabled world wide. This beacon hint is only sent if your device had
- * 	either disabled active scanning or beaconing on a channel. We send to
- * 	userspace the wiphy on which we removed a restriction from
- * 	(%NL80211_ATTR_WIPHY) and the channel on which this occurred
- * 	before (%NL80211_ATTR_FREQ_BEFORE) and after (%NL80211_ATTR_FREQ_AFTER)
- * 	the beacon hint was processed.
- *
- * @NL80211_CMD_AUTHENTICATE: authentication request and notification.
- *	This command is used both as a command (request to authenticate) and
- *	as an event on the "mlme" multicast group indicating completion of the
- *	authentication process.
- *	When used as a command, %NL80211_ATTR_IFINDEX is used to identify the
- *	interface. %NL80211_ATTR_MAC is used to specify PeerSTAAddress (and
- *	BSSID in case of station mode). %NL80211_ATTR_SSID is used to specify
- *	the SSID (mainly for association, but is included in authentication
- *	request, too, to help BSS selection. %NL80211_ATTR_WIPHY_FREQ is used
- *	to specify the frequence of the channel in MHz. %NL80211_ATTR_AUTH_TYPE
- *	is used to specify the authentication type. %NL80211_ATTR_IE is used to
- *	define IEs (VendorSpecificInfo, but also including RSN IE and FT IEs)
- *	to be added to the frame.
- *	When used as an event, this reports reception of an Authentication
- *	frame in station and IBSS modes when the local MLME processed the
- *	frame, i.e., it was for the local STA and was received in correct
- *	state. This is similar to MLME-AUTHENTICATE.confirm primitive in the
- *	MLME SAP interface (kernel providing MLME, userspace SME). The
- *	included %NL80211_ATTR_FRAME attribute contains the management frame
- *	(including both the header and frame body, but not FCS). This event is
- *	also used to indicate if the authentication attempt timed out. In that
- *	case the %NL80211_ATTR_FRAME attribute is replaced with a
- *	%NL80211_ATTR_TIMED_OUT flag (and %NL80211_ATTR_MAC to indicate which
- *	pending authentication timed out).
- * @NL80211_CMD_ASSOCIATE: association request and notification; like
- *	NL80211_CMD_AUTHENTICATE but for Association and Reassociation
- *	(similar to MLME-ASSOCIATE.request, MLME-REASSOCIATE.request,
- *	MLME-ASSOCIATE.confirm or MLME-REASSOCIATE.confirm primitives).
- * @NL80211_CMD_DEAUTHENTICATE: deauthentication request and notification; like
- *	NL80211_CMD_AUTHENTICATE but for Deauthentication frames (similar to
- *	MLME-DEAUTHENTICATION.request and MLME-DEAUTHENTICATE.indication
- *	primitives).
- * @NL80211_CMD_DISASSOCIATE: disassociation request and notification; like
- *	NL80211_CMD_AUTHENTICATE but for Disassociation frames (similar to
- *	MLME-DISASSOCIATE.request and MLME-DISASSOCIATE.indication primitives).
- *
- * @NL80211_CMD_MICHAEL_MIC_FAILURE: notification of a locally detected Michael
- *	MIC (part of TKIP) failure; sent on the "mlme" multicast group; the
- *	event includes %NL80211_ATTR_MAC to describe the source MAC address of
- *	the frame with invalid MIC, %NL80211_ATTR_KEY_TYPE to show the key
- *	type, %NL80211_ATTR_KEY_IDX to indicate the key identifier, and
- *	%NL80211_ATTR_KEY_SEQ to indicate the TSC value of the frame; this
- *	event matches with MLME-MICHAELMICFAILURE.indication() primitive
- *
- * @NL80211_CMD_JOIN_IBSS: Join a new IBSS -- given at least an SSID and a
- *	FREQ attribute (for the initial frequency if no peer can be found)
- *	and optionally a MAC (as BSSID) and FREQ_FIXED attribute if those
- *	should be fixed rather than automatically determined. Can only be
- *	executed on a network interface that is UP, and fixed BSSID/FREQ
- *	may be rejected. Another optional parameter is the beacon interval,
- *	given in the %NL80211_ATTR_BEACON_INTERVAL attribute, which if not
- *	given defaults to 100 TU (102.4ms).
- * @NL80211_CMD_LEAVE_IBSS: Leave the IBSS -- no special arguments, the IBSS is
- *	determined by the network interface.
- *
- * @NL80211_CMD_TESTMODE: testmode command, takes a wiphy (or ifindex) attribute
- *	to identify the device, and the TESTDATA blob attribute to pass through
- *	to the driver.
- *
- * @NL80211_CMD_CONNECT: connection request and notification; this command
- *	requests to connect to a specified network but without separating
- *	auth and assoc steps. For this, you need to specify the SSID in a
- *	%NL80211_ATTR_SSID attribute, and can optionally specify the association
- *	IEs in %NL80211_ATTR_IE, %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_MAC,
- *	%NL80211_ATTR_WIPHY_FREQ, %NL80211_ATTR_CONTROL_PORT,
- *	%NL80211_ATTR_CONTROL_PORT_ETHERTYPE and
- *	%NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT.
- *	Background scan period can optionally be
- *	specified in %NL80211_ATTR_BG_SCAN_PERIOD,
- *	if not specified default background scan configuration
- *	in driver is used and if period value is 0, bg scan will be disabled.
- *	This attribute is ignored if driver does not support roam scan.
- *	It is also sent as an event, with the BSSID and response IEs when the
- *	connection is established or failed to be established. This can be
- *	determined by the STATUS_CODE attribute.
- * @NL80211_CMD_ROAM: request that the card roam (currently not implemented),
- *	sent as an event when the card/driver roamed by itself.
- * @NL80211_CMD_DISCONNECT: drop a given connection; also used to notify
- *	userspace that a connection was dropped by the AP or due to other
- *	reasons, for this the %NL80211_ATTR_DISCONNECTED_BY_AP and
- *	%NL80211_ATTR_REASON_CODE attributes are used.
- *
- * @NL80211_CMD_SET_WIPHY_NETNS: Set a wiphy's netns. Note that all devices
- *	associated with this wiphy must be down and will follow.
- *
- * @NL80211_CMD_REMAIN_ON_CHANNEL: Request to remain awake on the specified
- *	channel for the specified amount of time. This can be used to do
- *	off-channel operations like transmit a Public Action frame and wait for
- *	a response while being associated to an AP on another channel.
- *	%NL80211_ATTR_IFINDEX is used to specify which interface (and thus
- *	radio) is used. %NL80211_ATTR_WIPHY_FREQ is used to specify the
- *	frequency for the operation and %NL80211_ATTR_WIPHY_CHANNEL_TYPE may be
- *	optionally used to specify additional channel parameters.
- *	%NL80211_ATTR_DURATION is used to specify the duration in milliseconds
- *	to remain on the channel. This command is also used as an event to
- *	notify when the requested duration starts (it may take a while for the
- *	driver to schedule this time due to other concurrent needs for the
- *	radio).
- *	When called, this operation returns a cookie (%NL80211_ATTR_COOKIE)
- *	that will be included with any events pertaining to this request;
- *	the cookie is also used to cancel the request.
- * @NL80211_CMD_CANCEL_REMAIN_ON_CHANNEL: This command can be used to cancel a
- *	pending remain-on-channel duration if the desired operation has been
- *	completed prior to expiration of the originally requested duration.
- *	%NL80211_ATTR_WIPHY or %NL80211_ATTR_IFINDEX is used to specify the
- *	radio. The %NL80211_ATTR_COOKIE attribute must be given as well to
- *	uniquely identify the request.
- *	This command is also used as an event to notify when a requested
- *	remain-on-channel duration has expired.
- *
- * @NL80211_CMD_SET_TX_BITRATE_MASK: Set the mask of rates to be used in TX
- *	rate selection. %NL80211_ATTR_IFINDEX is used to specify the interface
- *	and @NL80211_ATTR_TX_RATES the set of allowed rates.
- *
- * @NL80211_CMD_REGISTER_FRAME: Register for receiving certain mgmt frames
- *	(via @NL80211_CMD_FRAME) for processing in userspace. This command
- *	requires an interface index, a frame type attribute (optional for
- *	backward compatibility reasons, if not given assumes action frames)
- *	and a match attribute containing the first few bytes of the frame
- *	that should match, e.g. a single byte for only a category match or
- *	four bytes for vendor frames including the OUI. The registration
- *	cannot be dropped, but is removed automatically when the netlink
- *	socket is closed. Multiple registrations can be made.
- * @NL80211_CMD_REGISTER_ACTION: Alias for @NL80211_CMD_REGISTER_FRAME for
- *	backward compatibility
- * @NL80211_CMD_FRAME: Management frame TX request and RX notification. This
- *	command is used both as a request to transmit a management frame and
- *	as an event indicating reception of a frame that was not processed in
- *	kernel code, but is for us (i.e., which may need to be processed in a
- *	user space application). %NL80211_ATTR_FRAME is used to specify the
- *	frame contents (including header). %NL80211_ATTR_WIPHY_FREQ (and
- *	optionally %NL80211_ATTR_WIPHY_CHANNEL_TYPE) is used to indicate on
- *	which channel the frame is to be transmitted or was received. If this
- *	channel is not the current channel (remain-on-channel or the
- *	operational channel) the device will switch to the given channel and
- *	transmit the frame, optionally waiting for a response for the time
- *	specified using %NL80211_ATTR_DURATION. When called, this operation
- *	returns a cookie (%NL80211_ATTR_COOKIE) that will be included with the
- *	TX status event pertaining to the TX request.
- *	%NL80211_ATTR_TX_NO_CCK_RATE is used to decide whether to send the
- *	management frames at CCK rate or not in 2GHz band.
- * @NL80211_CMD_FRAME_WAIT_CANCEL: When an off-channel TX was requested, this
- *	command may be used with the corresponding cookie to cancel the wait
- *	time if it is known that it is no longer necessary.
- * @NL80211_CMD_ACTION: Alias for @NL80211_CMD_FRAME for backward compatibility.
- * @NL80211_CMD_FRAME_TX_STATUS: Report TX status of a management frame
- *	transmitted with %NL80211_CMD_FRAME. %NL80211_ATTR_COOKIE identifies
- *	the TX command and %NL80211_ATTR_FRAME includes the contents of the
- *	frame. %NL80211_ATTR_ACK flag is included if the recipient acknowledged
- *	the frame.
- * @NL80211_CMD_ACTION_TX_STATUS: Alias for @NL80211_CMD_FRAME_TX_STATUS for
- *	backward compatibility.
- * @NL80211_CMD_SET_CQM: Connection quality monitor configuration. This command
- *	is used to configure connection quality monitoring notification trigger
- *	levels.
- * @NL80211_CMD_NOTIFY_CQM: Connection quality monitor notification. This
- *	command is used as an event to indicate the that a trigger level was
- *	reached.
- * @NL80211_CMD_SET_CHANNEL: Set the channel (using %NL80211_ATTR_WIPHY_FREQ
- *	and %NL80211_ATTR_WIPHY_CHANNEL_TYPE) the given interface (identifed
- *	by %NL80211_ATTR_IFINDEX) shall operate on.
- *	In case multiple channels are supported by the device, the mechanism
- *	with which it switches channels is implementation-defined.
- *	When a monitor interface is given, it can only switch channel while
- *	no other interfaces are operating to avoid disturbing the operation
- *	of any other interfaces, and other interfaces will again take
- *	precedence when they are used.
- *
- * @NL80211_CMD_SET_WDS_PEER: Set the MAC address of the peer on a WDS interface.
- *
- * @NL80211_CMD_JOIN_MESH: Join a mesh. The mesh ID must be given, and initial
- *	mesh config parameters may be given.
- * @NL80211_CMD_LEAVE_MESH: Leave the mesh network -- no special arguments, the
- *	network is determined by the network interface.
- *
- * @NL80211_CMD_UNPROT_DEAUTHENTICATE: Unprotected deauthentication frame
- *	notification. This event is used to indicate that an unprotected
- *	deauthentication frame was dropped when MFP is in use.
- * @NL80211_CMD_UNPROT_DISASSOCIATE: Unprotected disassociation frame
- *	notification. This event is used to indicate that an unprotected
- *	disassociation frame was dropped when MFP is in use.
- *
- * @NL80211_CMD_NEW_PEER_CANDIDATE: Notification on the reception of a
- *      beacon or probe response from a compatible mesh peer.  This is only
- *      sent while no station information (sta_info) exists for the new peer
- *      candidate and when @NL80211_MESH_SETUP_USERSPACE_AUTH is set.  On
- *      reception of this notification, userspace may decide to create a new
- *      station (@NL80211_CMD_NEW_STATION).  To stop this notification from
- *      reoccurring, the userspace authentication daemon may want to create the
- *      new station with the AUTHENTICATED flag unset and maybe change it later
- *      depending on the authentication result.
- *
- * @NL80211_CMD_GET_WOWLAN: get Wake-on-Wireless-LAN (WoWLAN) settings.
- * @NL80211_CMD_SET_WOWLAN: set Wake-on-Wireless-LAN (WoWLAN) settings.
- *	Since wireless is more complex than wired ethernet, it supports
- *	various triggers. These triggers can be configured through this
- *	command with the %NL80211_ATTR_WOWLAN_TRIGGERS attribute. For
- *	more background information, see
- *	http://wireless.kernel.org/en/users/Documentation/WoWLAN.
- *
- * @NL80211_CMD_SET_REKEY_OFFLOAD: This command is used give the driver
- *	the necessary information for supporting GTK rekey offload. This
- *	feature is typically used during WoWLAN. The configuration data
- *	is contained in %NL80211_ATTR_REKEY_DATA (which is nested and
- *	contains the data in sub-attributes). After rekeying happened,
- *	this command may also be sent by the driver as an MLME event to
- *	inform userspace of the new replay counter.
- *
- * @NL80211_CMD_PMKSA_CANDIDATE: This is used as an event to inform userspace
- *	of PMKSA caching dandidates.
- *
- * @NL80211_CMD_TDLS_OPER: Perform a high-level TDLS command (e.g. link setup).
- * @NL80211_CMD_TDLS_MGMT: Send a TDLS management frame.
- *
- * @NL80211_CMD_UNEXPECTED_FRAME: Used by an application controlling an AP
- *	(or GO) interface (i.e. hostapd) to ask for unexpected frames to
- *	implement sending deauth to stations that send unexpected class 3
- *	frames. Also used as the event sent by the kernel when such a frame
- *	is received.
- *	For the event, the %NL80211_ATTR_MAC attribute carries the TA and
- *	other attributes like the interface index are present.
- *	If used as the command it must have an interface index and you can
- *	only unsubscribe from the event by closing the socket. Subscription
- *	is also for %NL80211_CMD_UNEXPECTED_4ADDR_FRAME events.
- *
- * @NL80211_CMD_UNEXPECTED_4ADDR_FRAME: Sent as an event indicating that the
- *	associated station identified by %NL80211_ATTR_MAC sent a 4addr frame
- *	and wasn't already in a 4-addr VLAN. The event will be sent similarly
- *	to the %NL80211_CMD_UNEXPECTED_FRAME event, to the same listener.
- *
- * @NL80211_CMD_PROBE_CLIENT: Probe an associated station on an AP interface
- *	by sending a null data frame to it and reporting when the frame is
- *	acknowleged. This is used to allow timing out inactive clients. Uses
- *	%NL80211_ATTR_IFINDEX and %NL80211_ATTR_MAC. The command returns a
- *	direct reply with an %NL80211_ATTR_COOKIE that is later used to match
- *	up the event with the request. The event includes the same data and
- *	has %NL80211_ATTR_ACK set if the frame was ACKed.
- *
- * @NL80211_CMD_REGISTER_BEACONS: Register this socket to receive beacons from
- *	other BSSes when any interfaces are in AP mode. This helps implement
- *	OLBC handling in hostapd. Beacons are reported in %NL80211_CMD_FRAME
- *	messages. Note that per PHY only one application may register.
- *
- * @NL80211_CMD_SET_NOACK_MAP: sets a bitmap for the individual TIDs whether
- *      No Acknowledgement Policy should be applied.
- *
- * @NL80211_CMD_MAX: highest used command number
- * @__NL80211_CMD_AFTER_LAST: internal use
- */
-enum nl80211_commands {
-/* don't change the order or add anything between, this is ABI! */
-	NL80211_CMD_UNSPEC,
-
-	NL80211_CMD_GET_WIPHY,		/* can dump */
-	NL80211_CMD_SET_WIPHY,
-	NL80211_CMD_NEW_WIPHY,
-	NL80211_CMD_DEL_WIPHY,
-
-	NL80211_CMD_GET_INTERFACE,	/* can dump */
-	NL80211_CMD_SET_INTERFACE,
-	NL80211_CMD_NEW_INTERFACE,
-	NL80211_CMD_DEL_INTERFACE,
-
-	NL80211_CMD_GET_KEY,
-	NL80211_CMD_SET_KEY,
-	NL80211_CMD_NEW_KEY,
-	NL80211_CMD_DEL_KEY,
-
-	NL80211_CMD_GET_BEACON,
-	NL80211_CMD_SET_BEACON,
-	NL80211_CMD_START_AP,
-	NL80211_CMD_NEW_BEACON = NL80211_CMD_START_AP,
-	NL80211_CMD_STOP_AP,
-	NL80211_CMD_DEL_BEACON = NL80211_CMD_STOP_AP,
-
-	NL80211_CMD_GET_STATION,
-	NL80211_CMD_SET_STATION,
-	NL80211_CMD_NEW_STATION,
-	NL80211_CMD_DEL_STATION,
-
-	NL80211_CMD_GET_MPATH,
-	NL80211_CMD_SET_MPATH,
-	NL80211_CMD_NEW_MPATH,
-	NL80211_CMD_DEL_MPATH,
-
-	NL80211_CMD_SET_BSS,
-
-	NL80211_CMD_SET_REG,
-	NL80211_CMD_REQ_SET_REG,
-
-	NL80211_CMD_GET_MESH_CONFIG,
-	NL80211_CMD_SET_MESH_CONFIG,
-
-	NL80211_CMD_SET_MGMT_EXTRA_IE /* reserved; not used */,
-
-	NL80211_CMD_GET_REG,
-
-	NL80211_CMD_GET_SCAN,
-	NL80211_CMD_TRIGGER_SCAN,
-	NL80211_CMD_NEW_SCAN_RESULTS,
-	NL80211_CMD_SCAN_ABORTED,
-
-	NL80211_CMD_REG_CHANGE,
-
-	NL80211_CMD_AUTHENTICATE,
-	NL80211_CMD_ASSOCIATE,
-	NL80211_CMD_DEAUTHENTICATE,
-	NL80211_CMD_DISASSOCIATE,
-
-	NL80211_CMD_MICHAEL_MIC_FAILURE,
-
-	NL80211_CMD_REG_BEACON_HINT,
-
-	NL80211_CMD_JOIN_IBSS,
-	NL80211_CMD_LEAVE_IBSS,
-
-	NL80211_CMD_TESTMODE,
-
-	NL80211_CMD_CONNECT,
-	NL80211_CMD_ROAM,
-	NL80211_CMD_DISCONNECT,
-
-	NL80211_CMD_SET_WIPHY_NETNS,
-
-	NL80211_CMD_GET_SURVEY,
-	NL80211_CMD_NEW_SURVEY_RESULTS,
-
-	NL80211_CMD_SET_PMKSA,
-	NL80211_CMD_DEL_PMKSA,
-	NL80211_CMD_FLUSH_PMKSA,
-
-	NL80211_CMD_REMAIN_ON_CHANNEL,
-	NL80211_CMD_CANCEL_REMAIN_ON_CHANNEL,
-
-	NL80211_CMD_SET_TX_BITRATE_MASK,
-
-	NL80211_CMD_REGISTER_FRAME,
-	NL80211_CMD_REGISTER_ACTION = NL80211_CMD_REGISTER_FRAME,
-	NL80211_CMD_FRAME,
-	NL80211_CMD_ACTION = NL80211_CMD_FRAME,
-	NL80211_CMD_FRAME_TX_STATUS,
-	NL80211_CMD_ACTION_TX_STATUS = NL80211_CMD_FRAME_TX_STATUS,
-
-	NL80211_CMD_SET_POWER_SAVE,
-	NL80211_CMD_GET_POWER_SAVE,
-
-	NL80211_CMD_SET_CQM,
-	NL80211_CMD_NOTIFY_CQM,
-
-	NL80211_CMD_SET_CHANNEL,
-	NL80211_CMD_SET_WDS_PEER,
-
-	NL80211_CMD_FRAME_WAIT_CANCEL,
-
-	NL80211_CMD_JOIN_MESH,
-	NL80211_CMD_LEAVE_MESH,
-
-	NL80211_CMD_UNPROT_DEAUTHENTICATE,
-	NL80211_CMD_UNPROT_DISASSOCIATE,
-
-	NL80211_CMD_NEW_PEER_CANDIDATE,
-
-	NL80211_CMD_GET_WOWLAN,
-	NL80211_CMD_SET_WOWLAN,
-
-	NL80211_CMD_START_SCHED_SCAN,
-	NL80211_CMD_STOP_SCHED_SCAN,
-	NL80211_CMD_SCHED_SCAN_RESULTS,
-	NL80211_CMD_SCHED_SCAN_STOPPED,
-
-	NL80211_CMD_SET_REKEY_OFFLOAD,
-
-	NL80211_CMD_PMKSA_CANDIDATE,
-
-	NL80211_CMD_TDLS_OPER,
-	NL80211_CMD_TDLS_MGMT,
-
-	NL80211_CMD_UNEXPECTED_FRAME,
-
-	NL80211_CMD_PROBE_CLIENT,
-
-	NL80211_CMD_REGISTER_BEACONS,
-
-	NL80211_CMD_UNEXPECTED_4ADDR_FRAME,
-
-	NL80211_CMD_SET_NOACK_MAP,
-
-	/* add new commands above here */
-
-	/* used to define NL80211_CMD_MAX below */
-	__NL80211_CMD_AFTER_LAST,
-	NL80211_CMD_MAX = __NL80211_CMD_AFTER_LAST - 1
-};
-
-/*
- * Allow user space programs to use #ifdef on new commands by defining them
- * here
- */
-#define NL80211_CMD_SET_BSS NL80211_CMD_SET_BSS
-#define NL80211_CMD_SET_MGMT_EXTRA_IE NL80211_CMD_SET_MGMT_EXTRA_IE
-#define NL80211_CMD_REG_CHANGE NL80211_CMD_REG_CHANGE
-#define NL80211_CMD_AUTHENTICATE NL80211_CMD_AUTHENTICATE
-#define NL80211_CMD_ASSOCIATE NL80211_CMD_ASSOCIATE
-#define NL80211_CMD_DEAUTHENTICATE NL80211_CMD_DEAUTHENTICATE
-#define NL80211_CMD_DISASSOCIATE NL80211_CMD_DISASSOCIATE
-#define NL80211_CMD_REG_BEACON_HINT NL80211_CMD_REG_BEACON_HINT
-
-#define NL80211_ATTR_FEATURE_FLAGS NL80211_ATTR_FEATURE_FLAGS
-
-/* source-level API compatibility */
-#define NL80211_CMD_GET_MESH_PARAMS NL80211_CMD_GET_MESH_CONFIG
-#define NL80211_CMD_SET_MESH_PARAMS NL80211_CMD_SET_MESH_CONFIG
-#define NL80211_MESH_SETUP_VENDOR_PATH_SEL_IE NL80211_MESH_SETUP_IE
-
-/**
- * enum nl80211_attrs - nl80211 netlink attributes
- *
- * @NL80211_ATTR_UNSPEC: unspecified attribute to catch errors
- *
- * @NL80211_ATTR_WIPHY: index of wiphy to operate on, cf.
- *	/sys/class/ieee80211/<phyname>/index
- * @NL80211_ATTR_WIPHY_NAME: wiphy name (used for renaming)
- * @NL80211_ATTR_WIPHY_TXQ_PARAMS: a nested array of TX queue parameters
- * @NL80211_ATTR_WIPHY_FREQ: frequency of the selected channel in MHz
- * @NL80211_ATTR_WIPHY_CHANNEL_TYPE: included with NL80211_ATTR_WIPHY_FREQ
- *	if HT20 or HT40 are allowed (i.e., 802.11n disabled if not included):
- *	NL80211_CHAN_NO_HT = HT not allowed (i.e., same as not including
- *		this attribute)
- *	NL80211_CHAN_HT20 = HT20 only
- *	NL80211_CHAN_HT40MINUS = secondary channel is below the primary channel
- *	NL80211_CHAN_HT40PLUS = secondary channel is above the primary channel
- * @NL80211_ATTR_WIPHY_RETRY_SHORT: TX retry limit for frames whose length is
- *	less than or equal to the RTS threshold; allowed range: 1..255;
- *	dot11ShortRetryLimit; u8
- * @NL80211_ATTR_WIPHY_RETRY_LONG: TX retry limit for frames whose length is
- *	greater than the RTS threshold; allowed range: 1..255;
- *	dot11ShortLongLimit; u8
- * @NL80211_ATTR_WIPHY_FRAG_THRESHOLD: fragmentation threshold, i.e., maximum
- *	length in octets for frames; allowed range: 256..8000, disable
- *	fragmentation with (u32)-1; dot11FragmentationThreshold; u32
- * @NL80211_ATTR_WIPHY_RTS_THRESHOLD: RTS threshold (TX frames with length
- *	larger than or equal to this use RTS/CTS handshake); allowed range:
- *	0..65536, disable with (u32)-1; dot11RTSThreshold; u32
- * @NL80211_ATTR_WIPHY_COVERAGE_CLASS: Coverage Class as defined by IEEE 802.11
- *	section 7.3.2.9; dot11CoverageClass; u8
- *
- * @NL80211_ATTR_IFINDEX: network interface index of the device to operate on
- * @NL80211_ATTR_IFNAME: network interface name
- * @NL80211_ATTR_IFTYPE: type of virtual interface, see &enum nl80211_iftype
- *
- * @NL80211_ATTR_MAC: MAC address (various uses)
- *
- * @NL80211_ATTR_KEY_DATA: (temporal) key data; for TKIP this consists of
- *	16 bytes encryption key followed by 8 bytes each for TX and RX MIC
- *	keys
- * @NL80211_ATTR_KEY_IDX: key ID (u8, 0-3)
- * @NL80211_ATTR_KEY_CIPHER: key cipher suite (u32, as defined by IEEE 802.11
- *	section 7.3.2.25.1, e.g. 0x000FAC04)
- * @NL80211_ATTR_KEY_SEQ: transmit key sequence number (IV/PN) for TKIP and
- *	CCMP keys, each six bytes in little endian
- *
- * @NL80211_ATTR_BEACON_INTERVAL: beacon interval in TU
- * @NL80211_ATTR_DTIM_PERIOD: DTIM period for beaconing
- * @NL80211_ATTR_BEACON_HEAD: portion of the beacon before the TIM IE
- * @NL80211_ATTR_BEACON_TAIL: portion of the beacon after the TIM IE
- *
- * @NL80211_ATTR_STA_AID: Association ID for the station (u16)
- * @NL80211_ATTR_STA_FLAGS: flags, nested element with NLA_FLAG attributes of
- *	&enum nl80211_sta_flags (deprecated, use %NL80211_ATTR_STA_FLAGS2)
- * @NL80211_ATTR_STA_LISTEN_INTERVAL: listen interval as defined by
- *	IEEE 802.11 7.3.1.6 (u16).
- * @NL80211_ATTR_STA_SUPPORTED_RATES: supported rates, array of supported
- *	rates as defined by IEEE 802.11 7.3.2.2 but without the length
- *	restriction (at most %NL80211_MAX_SUPP_RATES).
- * @NL80211_ATTR_STA_VLAN: interface index of VLAN interface to move station
- *	to, or the AP interface the station was originally added to to.
- * @NL80211_ATTR_STA_INFO: information about a station, part of station info
- *	given for %NL80211_CMD_GET_STATION, nested attribute containing
- *	info as possible, see &enum nl80211_sta_info.
- *
- * @NL80211_ATTR_WIPHY_BANDS: Information about an operating bands,
- *	consisting of a nested array.
- *
- * @NL80211_ATTR_MESH_ID: mesh id (1-32 bytes).
- * @NL80211_ATTR_STA_PLINK_ACTION: action to perform on the mesh peer link.
- * @NL80211_ATTR_MPATH_NEXT_HOP: MAC address of the next hop for a mesh path.
- * @NL80211_ATTR_MPATH_INFO: information about a mesh_path, part of mesh path
- * 	info given for %NL80211_CMD_GET_MPATH, nested attribute described at
- *	&enum nl80211_mpath_info.
- *
- * @NL80211_ATTR_MNTR_FLAGS: flags, nested element with NLA_FLAG attributes of
- *      &enum nl80211_mntr_flags.
- *
- * @NL80211_ATTR_REG_ALPHA2: an ISO-3166-alpha2 country code for which the
- * 	current regulatory domain should be set to or is already set to.
- * 	For example, 'CR', for Costa Rica. This attribute is used by the kernel
- * 	to query the CRDA to retrieve one regulatory domain. This attribute can
- * 	also be used by userspace to query the kernel for the currently set
- * 	regulatory domain. We chose an alpha2 as that is also used by the
- * 	IEEE-802.11d country information element to identify a country.
- * 	Users can also simply ask the wireless core to set regulatory domain
- * 	to a specific alpha2.
- * @NL80211_ATTR_REG_RULES: a nested array of regulatory domain regulatory
- *	rules.
- *
- * @NL80211_ATTR_BSS_CTS_PROT: whether CTS protection is enabled (u8, 0 or 1)
- * @NL80211_ATTR_BSS_SHORT_PREAMBLE: whether short preamble is enabled
- *	(u8, 0 or 1)
- * @NL80211_ATTR_BSS_SHORT_SLOT_TIME: whether short slot time enabled
- *	(u8, 0 or 1)
- * @NL80211_ATTR_BSS_BASIC_RATES: basic rates, array of basic
- *	rates in format defined by IEEE 802.11 7.3.2.2 but without the length
- *	restriction (at most %NL80211_MAX_SUPP_RATES).
- *
- * @NL80211_ATTR_HT_CAPABILITY: HT Capability information element (from
- *	association request when used with NL80211_CMD_NEW_STATION)
- *
- * @NL80211_ATTR_SUPPORTED_IFTYPES: nested attribute containing all
- *	supported interface types, each a flag attribute with the number
- *	of the interface mode.
- *
- * @NL80211_ATTR_MGMT_SUBTYPE: Management frame subtype for
- *	%NL80211_CMD_SET_MGMT_EXTRA_IE.
- *
- * @NL80211_ATTR_IE: Information element(s) data (used, e.g., with
- *	%NL80211_CMD_SET_MGMT_EXTRA_IE).
- *
- * @NL80211_ATTR_MAX_NUM_SCAN_SSIDS: number of SSIDs you can scan with
- *	a single scan request, a wiphy attribute.
- * @NL80211_ATTR_MAX_NUM_SCHED_SCAN_SSIDS: number of SSIDs you can
- *	scan with a single scheduled scan request, a wiphy attribute.
- * @NL80211_ATTR_MAX_SCAN_IE_LEN: maximum length of information elements
- *	that can be added to a scan request
- * @NL80211_ATTR_MAX_SCHED_SCAN_IE_LEN: maximum length of information
- *	elements that can be added to a scheduled scan request
- * @NL80211_ATTR_MAX_MATCH_SETS: maximum number of sets that can be
- *	used with @NL80211_ATTR_SCHED_SCAN_MATCH, a wiphy attribute.
- *
- * @NL80211_ATTR_SCAN_FREQUENCIES: nested attribute with frequencies (in MHz)
- * @NL80211_ATTR_SCAN_SSIDS: nested attribute with SSIDs, leave out for passive
- *	scanning and include a zero-length SSID (wildcard) for wildcard scan
- * @NL80211_ATTR_BSS: scan result BSS
- *
- * @NL80211_ATTR_REG_INITIATOR: indicates who requested the regulatory domain
- * 	currently in effect. This could be any of the %NL80211_REGDOM_SET_BY_*
- * @NL80211_ATTR_REG_TYPE: indicates the type of the regulatory domain currently
- * 	set. This can be one of the nl80211_reg_type (%NL80211_REGDOM_TYPE_*)
- *
- * @NL80211_ATTR_SUPPORTED_COMMANDS: wiphy attribute that specifies
- *	an array of command numbers (i.e. a mapping index to command number)
- *	that the driver for the given wiphy supports.
- *
- * @NL80211_ATTR_FRAME: frame data (binary attribute), including frame header
- *	and body, but not FCS; used, e.g., with NL80211_CMD_AUTHENTICATE and
- *	NL80211_CMD_ASSOCIATE events
- * @NL80211_ATTR_SSID: SSID (binary attribute, 0..32 octets)
- * @NL80211_ATTR_AUTH_TYPE: AuthenticationType, see &enum nl80211_auth_type,
- *	represented as a u32
- * @NL80211_ATTR_REASON_CODE: ReasonCode for %NL80211_CMD_DEAUTHENTICATE and
- *	%NL80211_CMD_DISASSOCIATE, u16
- *
- * @NL80211_ATTR_KEY_TYPE: Key Type, see &enum nl80211_key_type, represented as
- *	a u32
- *
- * @NL80211_ATTR_FREQ_BEFORE: A channel which has suffered a regulatory change
- * 	due to considerations from a beacon hint. This attribute reflects
- * 	the state of the channel _before_ the beacon hint processing. This
- * 	attributes consists of a nested attribute containing
- * 	NL80211_FREQUENCY_ATTR_*
- * @NL80211_ATTR_FREQ_AFTER: A channel which has suffered a regulatory change
- * 	due to considerations from a beacon hint. This attribute reflects
- * 	the state of the channel _after_ the beacon hint processing. This
- * 	attributes consists of a nested attribute containing
- * 	NL80211_FREQUENCY_ATTR_*
- *
- * @NL80211_ATTR_CIPHER_SUITES: a set of u32 values indicating the supported
- *	cipher suites
- *
- * @NL80211_ATTR_FREQ_FIXED: a flag indicating the IBSS should not try to look
- *	for other networks on different channels
- *
- * @NL80211_ATTR_TIMED_OUT: a flag indicating than an operation timed out; this
- *	is used, e.g., with %NL80211_CMD_AUTHENTICATE event
- *
- * @NL80211_ATTR_USE_MFP: Whether management frame protection (IEEE 802.11w) is
- *	used for the association (&enum nl80211_mfp, represented as a u32);
- *	this attribute can be used
- *	with %NL80211_CMD_ASSOCIATE request
- *
- * @NL80211_ATTR_STA_FLAGS2: Attribute containing a
- *	&struct nl80211_sta_flag_update.
- *
- * @NL80211_ATTR_CONTROL_PORT: A flag indicating whether user space controls
- *	IEEE 802.1X port, i.e., sets/clears %NL80211_STA_FLAG_AUTHORIZED, in
- *	station mode. If the flag is included in %NL80211_CMD_ASSOCIATE
- *	request, the driver will assume that the port is unauthorized until
- *	authorized by user space. Otherwise, port is marked authorized by
- *	default in station mode.
- * @NL80211_ATTR_CONTROL_PORT_ETHERTYPE: A 16-bit value indicating the
- *	ethertype that will be used for key negotiation. It can be
- *	specified with the associate and connect commands. If it is not
- *	specified, the value defaults to 0x888E (PAE, 802.1X). This
- *	attribute is also used as a flag in the wiphy information to
- *	indicate that protocols other than PAE are supported.
- * @NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT: When included along with
- *	%NL80211_ATTR_CONTROL_PORT_ETHERTYPE, indicates that the custom
- *	ethertype frames used for key negotiation must not be encrypted.
- *
- * @NL80211_ATTR_TESTDATA: Testmode data blob, passed through to the driver.
- *	We recommend using nested, driver-specific attributes within this.
- *
- * @NL80211_ATTR_DISCONNECTED_BY_AP: A flag indicating that the DISCONNECT
- *	event was due to the AP disconnecting the station, and not due to
- *	a local disconnect request.
- * @NL80211_ATTR_STATUS_CODE: StatusCode for the %NL80211_CMD_CONNECT
- *	event (u16)
- * @NL80211_ATTR_PRIVACY: Flag attribute, used with connect(), indicating
- *	that protected APs should be used. This is also used with NEW_BEACON to
- *	indicate that the BSS is to use protection.
- *
- * @NL80211_ATTR_CIPHERS_PAIRWISE: Used with CONNECT, ASSOCIATE, and NEW_BEACON
- *	to indicate which unicast key ciphers will be used with the connection
- *	(an array of u32).
- * @NL80211_ATTR_CIPHER_GROUP: Used with CONNECT, ASSOCIATE, and NEW_BEACON to
- *	indicate which group key cipher will be used with the connection (a
- *	u32).
- * @NL80211_ATTR_WPA_VERSIONS: Used with CONNECT, ASSOCIATE, and NEW_BEACON to
- *	indicate which WPA version(s) the AP we want to associate with is using
- *	(a u32 with flags from &enum nl80211_wpa_versions).
- * @NL80211_ATTR_AKM_SUITES: Used with CONNECT, ASSOCIATE, and NEW_BEACON to
- *	indicate which key management algorithm(s) to use (an array of u32).
- *
- * @NL80211_ATTR_REQ_IE: (Re)association request information elements as
- *	sent out by the card, for ROAM and successful CONNECT events.
- * @NL80211_ATTR_RESP_IE: (Re)association response information elements as
- *	sent by peer, for ROAM and successful CONNECT events.
- *
- * @NL80211_ATTR_PREV_BSSID: previous BSSID, to be used by in ASSOCIATE
- *	commands to specify using a reassociate frame
- *
- * @NL80211_ATTR_KEY: key information in a nested attribute with
- *	%NL80211_KEY_* sub-attributes
- * @NL80211_ATTR_KEYS: array of keys for static WEP keys for connect()
- *	and join_ibss(), key information is in a nested attribute each
- *	with %NL80211_KEY_* sub-attributes
- *
- * @NL80211_ATTR_PID: Process ID of a network namespace.
- *
- * @NL80211_ATTR_GENERATION: Used to indicate consistent snapshots for
- *	dumps. This number increases whenever the object list being
- *	dumped changes, and as such userspace can verify that it has
- *	obtained a complete and consistent snapshot by verifying that
- *	all dump messages contain the same generation number. If it
- *	changed then the list changed and the dump should be repeated
- *	completely from scratch.
- *
- * @NL80211_ATTR_4ADDR: Use 4-address frames on a virtual interface
- *
- * @NL80211_ATTR_SURVEY_INFO: survey information about a channel, part of
- *      the survey response for %NL80211_CMD_GET_SURVEY, nested attribute
- *      containing info as possible, see &enum survey_info.
- *
- * @NL80211_ATTR_PMKID: PMK material for PMKSA caching.
- * @NL80211_ATTR_MAX_NUM_PMKIDS: maximum number of PMKIDs a firmware can
- *	cache, a wiphy attribute.
- *
- * @NL80211_ATTR_DURATION: Duration of an operation in milliseconds, u32.
- * @NL80211_ATTR_MAX_REMAIN_ON_CHANNEL_DURATION: Device attribute that
- *	specifies the maximum duration that can be requested with the
- *	remain-on-channel operation, in milliseconds, u32.
- *
- * @NL80211_ATTR_COOKIE: Generic 64-bit cookie to identify objects.
- *
- * @NL80211_ATTR_TX_RATES: Nested set of attributes
- *	(enum nl80211_tx_rate_attributes) describing TX rates per band. The
- *	enum nl80211_band value is used as the index (nla_type() of the nested
- *	data. If a band is not included, it will be configured to allow all
- *	rates based on negotiated supported rates information. This attribute
- *	is used with %NL80211_CMD_SET_TX_BITRATE_MASK.
- *
- * @NL80211_ATTR_FRAME_MATCH: A binary attribute which typically must contain
- *	at least one byte, currently used with @NL80211_CMD_REGISTER_FRAME.
- * @NL80211_ATTR_FRAME_TYPE: A u16 indicating the frame type/subtype for the
- *	@NL80211_CMD_REGISTER_FRAME command.
- * @NL80211_ATTR_TX_FRAME_TYPES: wiphy capability attribute, which is a
- *	nested attribute of %NL80211_ATTR_FRAME_TYPE attributes, containing
- *	information about which frame types can be transmitted with
- *	%NL80211_CMD_FRAME.
- * @NL80211_ATTR_RX_FRAME_TYPES: wiphy capability attribute, which is a
- *	nested attribute of %NL80211_ATTR_FRAME_TYPE attributes, containing
- *	information about which frame types can be registered for RX.
- *
- * @NL80211_ATTR_ACK: Flag attribute indicating that the frame was
- *	acknowledged by the recipient.
- *
- * @NL80211_ATTR_CQM: connection quality monitor configuration in a
- *	nested attribute with %NL80211_ATTR_CQM_* sub-attributes.
- *
- * @NL80211_ATTR_LOCAL_STATE_CHANGE: Flag attribute to indicate that a command
- *	is requesting a local authentication/association state change without
- *	invoking actual management frame exchange. This can be used with
- *	NL80211_CMD_AUTHENTICATE, NL80211_CMD_DEAUTHENTICATE,
- *	NL80211_CMD_DISASSOCIATE.
- *
- * @NL80211_ATTR_AP_ISOLATE: (AP mode) Do not forward traffic between stations
- *	connected to this BSS.
- *
- * @NL80211_ATTR_WIPHY_TX_POWER_SETTING: Transmit power setting type. See
- *      &enum nl80211_tx_power_setting for possible values.
- * @NL80211_ATTR_WIPHY_TX_POWER_LEVEL: Transmit power level in signed mBm units.
- *      This is used in association with @NL80211_ATTR_WIPHY_TX_POWER_SETTING
- *      for non-automatic settings.
- *
- * @NL80211_ATTR_SUPPORT_IBSS_RSN: The device supports IBSS RSN, which mostly
- *	means support for per-station GTKs.
- *
- * @NL80211_ATTR_WIPHY_ANTENNA_TX: Bitmap of allowed antennas for transmitting.
- *	This can be used to mask out antennas which are not attached or should
- *	not be used for transmitting. If an antenna is not selected in this
- *	bitmap the hardware is not allowed to transmit on this antenna.
- *
- *	Each bit represents one antenna, starting with antenna 1 at the first
- *	bit. Depending on which antennas are selected in the bitmap, 802.11n
- *	drivers can derive which chainmasks to use (if all antennas belonging to
- *	a particular chain are disabled this chain should be disabled) and if
- *	a chain has diversity antennas wether diversity should be used or not.
- *	HT capabilities (STBC, TX Beamforming, Antenna selection) can be
- *	derived from the available chains after applying the antenna mask.
- *	Non-802.11n drivers can derive wether to use diversity or not.
- *	Drivers may reject configurations or RX/TX mask combinations they cannot
- *	support by returning -EINVAL.
- *
- * @NL80211_ATTR_WIPHY_ANTENNA_RX: Bitmap of allowed antennas for receiving.
- *	This can be used to mask out antennas which are not attached or should
- *	not be used for receiving. If an antenna is not selected in this bitmap
- *	the hardware should not be configured to receive on this antenna.
- *	For a more detailed description see @NL80211_ATTR_WIPHY_ANTENNA_TX.
- *
- * @NL80211_ATTR_WIPHY_ANTENNA_AVAIL_TX: Bitmap of antennas which are available
- *	for configuration as TX antennas via the above parameters.
- *
- * @NL80211_ATTR_WIPHY_ANTENNA_AVAIL_RX: Bitmap of antennas which are available
- *	for configuration as RX antennas via the above parameters.
- *
- * @NL80211_ATTR_MCAST_RATE: Multicast tx rate (in 100 kbps) for IBSS
- *
- * @NL80211_ATTR_OFFCHANNEL_TX_OK: For management frame TX, the frame may be
- *	transmitted on another channel when the channel given doesn't match
- *	the current channel. If the current channel doesn't match and this
- *	flag isn't set, the frame will be rejected. This is also used as an
- *	nl80211 capability flag.
- *
- * @NL80211_ATTR_BSS_HTOPMODE: HT operation mode (u16)
- *
- * @NL80211_ATTR_KEY_DEFAULT_TYPES: A nested attribute containing flags
- *	attributes, specifying what a key should be set as default as.
- *	See &enum nl80211_key_default_types.
- *
- * @NL80211_ATTR_MESH_SETUP: Optional mesh setup parameters.  These cannot be
- *	changed once the mesh is active.
- * @NL80211_ATTR_MESH_CONFIG: Mesh configuration parameters, a nested attribute
- *	containing attributes from &enum nl80211_meshconf_params.
- * @NL80211_ATTR_SUPPORT_MESH_AUTH: Currently, this means the underlying driver
- *	allows auth frames in a mesh to be passed to userspace for processing via
- *	the @NL80211_MESH_SETUP_USERSPACE_AUTH flag.
- * @NL80211_ATTR_STA_PLINK_STATE: The state of a mesh peer link as
- *	defined in &enum nl80211_plink_state. Used when userspace is
- *	driving the peer link management state machine.
- *	@NL80211_MESH_SETUP_USERSPACE_AMPE must be enabled.
- *
- * @NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED: indicates, as part of the wiphy
- *	capabilities, the supported WoWLAN triggers
- * @NL80211_ATTR_WOWLAN_TRIGGERS: used by %NL80211_CMD_SET_WOWLAN to
- *	indicate which WoW triggers should be enabled. This is also
- *	used by %NL80211_CMD_GET_WOWLAN to get the currently enabled WoWLAN
- *	triggers.
-
- * @NL80211_ATTR_SCHED_SCAN_INTERVAL: Interval between scheduled scan
- *	cycles, in msecs.
-
- * @NL80211_ATTR_SCHED_SCAN_MATCH: Nested attribute with one or more
- *	sets of attributes to match during scheduled scans.  Only BSSs
- *	that match any of the sets will be reported.  These are
- *	pass-thru filter rules.
- *	For a match to succeed, the BSS must match all attributes of a
- *	set.  Since not every hardware supports matching all types of
- *	attributes, there is no guarantee that the reported BSSs are
- *	fully complying with the match sets and userspace needs to be
- *	able to ignore them by itself.
- *	Thus, the implementation is somewhat hardware-dependent, but
- *	this is only an optimization and the userspace application
- *	needs to handle all the non-filtered results anyway.
- *	If the match attributes don't make sense when combined with
- *	the values passed in @NL80211_ATTR_SCAN_SSIDS (eg. if an SSID
- *	is included in the probe request, but the match attributes
- *	will never let it go through), -EINVAL may be returned.
- *	If ommited, no filtering is done.
- *
- * @NL80211_ATTR_INTERFACE_COMBINATIONS: Nested attribute listing the supported
- *	interface combinations. In each nested item, it contains attributes
- *	defined in &enum nl80211_if_combination_attrs.
- * @NL80211_ATTR_SOFTWARE_IFTYPES: Nested attribute (just like
- *	%NL80211_ATTR_SUPPORTED_IFTYPES) containing the interface types that
- *	are managed in software: interfaces of these types aren't subject to
- *	any restrictions in their number or combinations.
- *
- * @%NL80211_ATTR_REKEY_DATA: nested attribute containing the information
- *	necessary for GTK rekeying in the device, see &enum nl80211_rekey_data.
- *
- * @NL80211_ATTR_SCAN_SUPP_RATES: rates per to be advertised as supported in scan,
- *	nested array attribute containing an entry for each band, with the entry
- *	being a list of supported rates as defined by IEEE 802.11 7.3.2.2 but
- *	without the length restriction (at most %NL80211_MAX_SUPP_RATES).
- *
- * @NL80211_ATTR_HIDDEN_SSID: indicates whether SSID is to be hidden from Beacon
- *	and Probe Response (when response to wildcard Probe Request); see
- *	&enum nl80211_hidden_ssid, represented as a u32
- *
- * @NL80211_ATTR_IE_PROBE_RESP: Information element(s) for Probe Response frame.
- *	This is used with %NL80211_CMD_NEW_BEACON and %NL80211_CMD_SET_BEACON to
- *	provide extra IEs (e.g., WPS/P2P IE) into Probe Response frames when the
- *	driver (or firmware) replies to Probe Request frames.
- * @NL80211_ATTR_IE_ASSOC_RESP: Information element(s) for (Re)Association
- *	Response frames. This is used with %NL80211_CMD_NEW_BEACON and
- *	%NL80211_CMD_SET_BEACON to provide extra IEs (e.g., WPS/P2P IE) into
- *	(Re)Association Response frames when the driver (or firmware) replies to
- *	(Re)Association Request frames.
- *
- * @NL80211_ATTR_STA_WME: Nested attribute containing the wme configuration
- *	of the station, see &enum nl80211_sta_wme_attr.
- * @NL80211_ATTR_SUPPORT_AP_UAPSD: the device supports uapsd when working
- *	as AP.
- *
- * @NL80211_ATTR_ROAM_SUPPORT: Indicates whether the firmware is capable of
- *	roaming to another AP in the same ESS if the signal lever is low.
- *
- * @NL80211_ATTR_PMKSA_CANDIDATE: Nested attribute containing the PMKSA caching
- *	candidate information, see &enum nl80211_pmksa_candidate_attr.
- *
- * @NL80211_ATTR_TX_NO_CCK_RATE: Indicates whether to use CCK rate or not
- *	for management frames transmission. In order to avoid p2p probe/action
- *	frames are being transmitted at CCK rate in 2GHz band, the user space
- *	applications use this attribute.
- *	This attribute is used with %NL80211_CMD_TRIGGER_SCAN and
- *	%NL80211_CMD_FRAME commands.
- *
- * @NL80211_ATTR_TDLS_ACTION: Low level TDLS action code (e.g. link setup
- *	request, link setup confirm, link teardown, etc.). Values are
- *	described in the TDLS (802.11z) specification.
- * @NL80211_ATTR_TDLS_DIALOG_TOKEN: Non-zero token for uniquely identifying a
- *	TDLS conversation between two devices.
- * @NL80211_ATTR_TDLS_OPERATION: High level TDLS operation; see
- *	&enum nl80211_tdls_operation, represented as a u8.
- * @NL80211_ATTR_TDLS_SUPPORT: A flag indicating the device can operate
- *	as a TDLS peer sta.
- * @NL80211_ATTR_TDLS_EXTERNAL_SETUP: The TDLS discovery/setup and teardown
- *	procedures should be performed by sending TDLS packets via
- *	%NL80211_CMD_TDLS_MGMT. Otherwise %NL80211_CMD_TDLS_OPER should be
- *	used for asking the driver to perform a TDLS operation.
- *
- * @NL80211_ATTR_DEVICE_AP_SME: This u32 attribute may be listed for devices
- *	that have AP support to indicate that they have the AP SME integrated
- *	with support for the features listed in this attribute, see
- *	&enum nl80211_ap_sme_features.
- *
- * @NL80211_ATTR_DONT_WAIT_FOR_ACK: Used with %NL80211_CMD_FRAME, this tells
- *	the driver to not wait for an acknowledgement. Note that due to this,
- *	it will also not give a status callback nor return a cookie. This is
- *	mostly useful for probe responses to save airtime.
- *
- * @NL80211_ATTR_FEATURE_FLAGS: This u32 attribute contains flags from
- *	&enum nl80211_feature_flags and is advertised in wiphy information.
- * @NL80211_ATTR_PROBE_RESP_OFFLOAD: Indicates that the HW responds to probe
- *
- *	requests while operating in AP-mode.
- *	This attribute holds a bitmap of the supported protocols for
- *	offloading (see &enum nl80211_probe_resp_offload_support_attr).
- *
- * @NL80211_ATTR_PROBE_RESP: Probe Response template data. Contains the entire
- *	probe-response frame. The DA field in the 802.11 header is zero-ed out,
- *	to be filled by the FW.
- * @NL80211_ATTR_DISABLE_HT:  Force HT capable interfaces to disable
- *      this feature.  Currently, only supported in mac80211 drivers.
- * @NL80211_ATTR_HT_CAPABILITY_MASK: Specify which bits of the
- *      ATTR_HT_CAPABILITY to which attention should be paid.
- *      Currently, only mac80211 NICs support this feature.
- *      The values that may be configured are:
- *       MCS rates, MAX-AMSDU, HT-20-40 and HT_CAP_SGI_40
- *       AMPDU density and AMPDU factor.
- *      All values are treated as suggestions and may be ignored
- *      by the driver as required.  The actual values may be seen in
- *      the station debugfs ht_caps file.
- *
- * @NL80211_ATTR_DFS_REGION: region for regulatory rules which this country
- *    abides to when initiating radiation on DFS channels. A country maps
- *    to one DFS region.
- *
- * @NL80211_ATTR_NOACK_MAP: This u16 bitmap contains the No Ack Policy of
- *      up to 16 TIDs.
- *
- * @NL80211_ATTR_INACTIVITY_TIMEOUT: timeout value in seconds, this can be
- *	used by the drivers which has MLME in firmware and does not have support
- *	to report per station tx/rx activity to free up the staion entry from
- *	the list. This needs to be used when the driver advertises the
- *	capability to timeout the stations.
- *
- * @NL80211_ATTR_RX_SIGNAL_DBM: signal strength in dBm (as a 32-bit int);
- *	this attribute is (depending on the driver capabilities) added to
- *	received frames indicated with %NL80211_CMD_FRAME.
- *
- * @NL80211_ATTR_BG_SCAN_PERIOD: Background scan period in seconds
- *      or 0 to disable background scan.
- *
- * @NL80211_ATTR_MAX: highest attribute number currently defined
- * @__NL80211_ATTR_AFTER_LAST: internal use
- */
-enum nl80211_attrs {
-/* don't change the order or add anything between, this is ABI! */
-	NL80211_ATTR_UNSPEC,
-
-	NL80211_ATTR_WIPHY,
-	NL80211_ATTR_WIPHY_NAME,
-
-	NL80211_ATTR_IFINDEX,
-	NL80211_ATTR_IFNAME,
-	NL80211_ATTR_IFTYPE,
-
-	NL80211_ATTR_MAC,
-
-	NL80211_ATTR_KEY_DATA,
-	NL80211_ATTR_KEY_IDX,
-	NL80211_ATTR_KEY_CIPHER,
-	NL80211_ATTR_KEY_SEQ,
-	NL80211_ATTR_KEY_DEFAULT,
-
-	NL80211_ATTR_BEACON_INTERVAL,
-	NL80211_ATTR_DTIM_PERIOD,
-	NL80211_ATTR_BEACON_HEAD,
-	NL80211_ATTR_BEACON_TAIL,
-
-	NL80211_ATTR_STA_AID,
-	NL80211_ATTR_STA_FLAGS,
-	NL80211_ATTR_STA_LISTEN_INTERVAL,
-	NL80211_ATTR_STA_SUPPORTED_RATES,
-	NL80211_ATTR_STA_VLAN,
-	NL80211_ATTR_STA_INFO,
-
-	NL80211_ATTR_WIPHY_BANDS,
-
-	NL80211_ATTR_MNTR_FLAGS,
-
-	NL80211_ATTR_MESH_ID,
-	NL80211_ATTR_STA_PLINK_ACTION,
-	NL80211_ATTR_MPATH_NEXT_HOP,
-	NL80211_ATTR_MPATH_INFO,
-
-	NL80211_ATTR_BSS_CTS_PROT,
-	NL80211_ATTR_BSS_SHORT_PREAMBLE,
-	NL80211_ATTR_BSS_SHORT_SLOT_TIME,
-
-	NL80211_ATTR_HT_CAPABILITY,
-
-	NL80211_ATTR_SUPPORTED_IFTYPES,
-
-	NL80211_ATTR_REG_ALPHA2,
-	NL80211_ATTR_REG_RULES,
-
-	NL80211_ATTR_MESH_CONFIG,
-
-	NL80211_ATTR_BSS_BASIC_RATES,
-
-	NL80211_ATTR_WIPHY_TXQ_PARAMS,
-	NL80211_ATTR_WIPHY_FREQ,
-	NL80211_ATTR_WIPHY_CHANNEL_TYPE,
-
-	NL80211_ATTR_KEY_DEFAULT_MGMT,
-
-	NL80211_ATTR_MGMT_SUBTYPE,
-	NL80211_ATTR_IE,
-
-	NL80211_ATTR_MAX_NUM_SCAN_SSIDS,
-
-	NL80211_ATTR_SCAN_FREQUENCIES,
-	NL80211_ATTR_SCAN_SSIDS,
-	NL80211_ATTR_GENERATION, /* replaces old SCAN_GENERATION */
-	NL80211_ATTR_BSS,
-
-	NL80211_ATTR_REG_INITIATOR,
-	NL80211_ATTR_REG_TYPE,
-
-	NL80211_ATTR_SUPPORTED_COMMANDS,
-
-	NL80211_ATTR_FRAME,
-	NL80211_ATTR_SSID,
-	NL80211_ATTR_AUTH_TYPE,
-	NL80211_ATTR_REASON_CODE,
-
-	NL80211_ATTR_KEY_TYPE,
-
-	NL80211_ATTR_MAX_SCAN_IE_LEN,
-	NL80211_ATTR_CIPHER_SUITES,
-
-	NL80211_ATTR_FREQ_BEFORE,
-	NL80211_ATTR_FREQ_AFTER,
-
-	NL80211_ATTR_FREQ_FIXED,
-
-
-	NL80211_ATTR_WIPHY_RETRY_SHORT,
-	NL80211_ATTR_WIPHY_RETRY_LONG,
-	NL80211_ATTR_WIPHY_FRAG_THRESHOLD,
-	NL80211_ATTR_WIPHY_RTS_THRESHOLD,
-
-	NL80211_ATTR_TIMED_OUT,
-
-	NL80211_ATTR_USE_MFP,
-
-	NL80211_ATTR_STA_FLAGS2,
-
-	NL80211_ATTR_CONTROL_PORT,
-
-	NL80211_ATTR_TESTDATA,
-
-	NL80211_ATTR_PRIVACY,
-
-	NL80211_ATTR_DISCONNECTED_BY_AP,
-	NL80211_ATTR_STATUS_CODE,
-
-	NL80211_ATTR_CIPHER_SUITES_PAIRWISE,
-	NL80211_ATTR_CIPHER_SUITE_GROUP,
-	NL80211_ATTR_WPA_VERSIONS,
-	NL80211_ATTR_AKM_SUITES,
-
-	NL80211_ATTR_REQ_IE,
-	NL80211_ATTR_RESP_IE,
-
-	NL80211_ATTR_PREV_BSSID,
-
-	NL80211_ATTR_KEY,
-	NL80211_ATTR_KEYS,
-
-	NL80211_ATTR_PID,
-
-	NL80211_ATTR_4ADDR,
-
-	NL80211_ATTR_SURVEY_INFO,
-
-	NL80211_ATTR_PMKID,
-	NL80211_ATTR_MAX_NUM_PMKIDS,
-
-	NL80211_ATTR_DURATION,
-
-	NL80211_ATTR_COOKIE,
-
-	NL80211_ATTR_WIPHY_COVERAGE_CLASS,
-
-	NL80211_ATTR_TX_RATES,
-
-	NL80211_ATTR_FRAME_MATCH,
-
-	NL80211_ATTR_ACK,
-
-	NL80211_ATTR_PS_STATE,
-
-	NL80211_ATTR_CQM,
-
-	NL80211_ATTR_LOCAL_STATE_CHANGE,
-
-	NL80211_ATTR_AP_ISOLATE,
-
-	NL80211_ATTR_WIPHY_TX_POWER_SETTING,
-	NL80211_ATTR_WIPHY_TX_POWER_LEVEL,
-
-	NL80211_ATTR_TX_FRAME_TYPES,
-	NL80211_ATTR_RX_FRAME_TYPES,
-	NL80211_ATTR_FRAME_TYPE,
-
-	NL80211_ATTR_CONTROL_PORT_ETHERTYPE,
-	NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT,
-
-	NL80211_ATTR_SUPPORT_IBSS_RSN,
-
-	NL80211_ATTR_WIPHY_ANTENNA_TX,
-	NL80211_ATTR_WIPHY_ANTENNA_RX,
-
-	NL80211_ATTR_MCAST_RATE,
-
-	NL80211_ATTR_OFFCHANNEL_TX_OK,
-
-	NL80211_ATTR_BSS_HT_OPMODE,
-
-	NL80211_ATTR_KEY_DEFAULT_TYPES,
-
-	NL80211_ATTR_MAX_REMAIN_ON_CHANNEL_DURATION,
-
-	NL80211_ATTR_MESH_SETUP,
-
-	NL80211_ATTR_WIPHY_ANTENNA_AVAIL_TX,
-	NL80211_ATTR_WIPHY_ANTENNA_AVAIL_RX,
-
-	NL80211_ATTR_SUPPORT_MESH_AUTH,
-	NL80211_ATTR_STA_PLINK_STATE,
-
-	NL80211_ATTR_WOWLAN_TRIGGERS,
-	NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED,
-
-	NL80211_ATTR_SCHED_SCAN_INTERVAL,
-
-	NL80211_ATTR_INTERFACE_COMBINATIONS,
-	NL80211_ATTR_SOFTWARE_IFTYPES,
-
-	NL80211_ATTR_REKEY_DATA,
-
-	NL80211_ATTR_MAX_NUM_SCHED_SCAN_SSIDS,
-	NL80211_ATTR_MAX_SCHED_SCAN_IE_LEN,
-
-	NL80211_ATTR_SCAN_SUPP_RATES,
-
-	NL80211_ATTR_HIDDEN_SSID,
-
-	NL80211_ATTR_IE_PROBE_RESP,
-	NL80211_ATTR_IE_ASSOC_RESP,
-
-	NL80211_ATTR_STA_WME,
-	NL80211_ATTR_SUPPORT_AP_UAPSD,
-
-	NL80211_ATTR_ROAM_SUPPORT,
-
-	NL80211_ATTR_SCHED_SCAN_MATCH,
-	NL80211_ATTR_MAX_MATCH_SETS,
-
-	NL80211_ATTR_PMKSA_CANDIDATE,
-
-	NL80211_ATTR_TX_NO_CCK_RATE,
-
-	NL80211_ATTR_TDLS_ACTION,
-	NL80211_ATTR_TDLS_DIALOG_TOKEN,
-	NL80211_ATTR_TDLS_OPERATION,
-	NL80211_ATTR_TDLS_SUPPORT,
-	NL80211_ATTR_TDLS_EXTERNAL_SETUP,
-
-	NL80211_ATTR_DEVICE_AP_SME,
-
-	NL80211_ATTR_DONT_WAIT_FOR_ACK,
-
-	NL80211_ATTR_FEATURE_FLAGS,
-
-	NL80211_ATTR_PROBE_RESP_OFFLOAD,
-
-	NL80211_ATTR_PROBE_RESP,
-
-	NL80211_ATTR_DFS_REGION,
-
-	NL80211_ATTR_DISABLE_HT,
-	NL80211_ATTR_HT_CAPABILITY_MASK,
-
-	NL80211_ATTR_NOACK_MAP,
-
-	NL80211_ATTR_INACTIVITY_TIMEOUT,
-
-	NL80211_ATTR_RX_SIGNAL_DBM,
-
-	NL80211_ATTR_BG_SCAN_PERIOD,
-
-	/* add attributes here, update the policy in nl80211.c */
-
-	__NL80211_ATTR_AFTER_LAST,
-	NL80211_ATTR_MAX = __NL80211_ATTR_AFTER_LAST - 1
-};
-
-/* source-level API compatibility */
-#define NL80211_ATTR_SCAN_GENERATION NL80211_ATTR_GENERATION
-#define	NL80211_ATTR_MESH_PARAMS NL80211_ATTR_MESH_CONFIG
-
-/*
- * Allow user space programs to use #ifdef on new attributes by defining them
- * here
- */
-#define NL80211_CMD_CONNECT NL80211_CMD_CONNECT
-#define NL80211_ATTR_HT_CAPABILITY NL80211_ATTR_HT_CAPABILITY
-#define NL80211_ATTR_BSS_BASIC_RATES NL80211_ATTR_BSS_BASIC_RATES
-#define NL80211_ATTR_WIPHY_TXQ_PARAMS NL80211_ATTR_WIPHY_TXQ_PARAMS
-#define NL80211_ATTR_WIPHY_FREQ NL80211_ATTR_WIPHY_FREQ
-#define NL80211_ATTR_WIPHY_CHANNEL_TYPE NL80211_ATTR_WIPHY_CHANNEL_TYPE
-#define NL80211_ATTR_MGMT_SUBTYPE NL80211_ATTR_MGMT_SUBTYPE
-#define NL80211_ATTR_IE NL80211_ATTR_IE
-#define NL80211_ATTR_REG_INITIATOR NL80211_ATTR_REG_INITIATOR
-#define NL80211_ATTR_REG_TYPE NL80211_ATTR_REG_TYPE
-#define NL80211_ATTR_FRAME NL80211_ATTR_FRAME
-#define NL80211_ATTR_SSID NL80211_ATTR_SSID
-#define NL80211_ATTR_AUTH_TYPE NL80211_ATTR_AUTH_TYPE
-#define NL80211_ATTR_REASON_CODE NL80211_ATTR_REASON_CODE
-#define NL80211_ATTR_CIPHER_SUITES_PAIRWISE NL80211_ATTR_CIPHER_SUITES_PAIRWISE
-#define NL80211_ATTR_CIPHER_SUITE_GROUP NL80211_ATTR_CIPHER_SUITE_GROUP
-#define NL80211_ATTR_WPA_VERSIONS NL80211_ATTR_WPA_VERSIONS
-#define NL80211_ATTR_AKM_SUITES NL80211_ATTR_AKM_SUITES
-#define NL80211_ATTR_KEY NL80211_ATTR_KEY
-#define NL80211_ATTR_KEYS NL80211_ATTR_KEYS
-#define NL80211_ATTR_FEATURE_FLAGS NL80211_ATTR_FEATURE_FLAGS
-
-#define NL80211_MAX_SUPP_RATES			32
-#define NL80211_MAX_SUPP_HT_RATES		77
-#define NL80211_MAX_SUPP_REG_RULES		32
-#define NL80211_TKIP_DATA_OFFSET_ENCR_KEY	0
-#define NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY	16
-#define NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY	24
-#define NL80211_HT_CAPABILITY_LEN		26
-
-#define NL80211_MAX_NR_CIPHER_SUITES		5
-#define NL80211_MAX_NR_AKM_SUITES		2
-
-/**
- * enum nl80211_iftype - (virtual) interface types
- *
- * @NL80211_IFTYPE_UNSPECIFIED: unspecified type, driver decides
- * @NL80211_IFTYPE_ADHOC: independent BSS member
- * @NL80211_IFTYPE_STATION: managed BSS member
- * @NL80211_IFTYPE_AP: access point
- * @NL80211_IFTYPE_AP_VLAN: VLAN interface for access points; VLAN interfaces
- *	are a bit special in that they must always be tied to a pre-existing
- *	AP type interface.
- * @NL80211_IFTYPE_WDS: wireless distribution interface
- * @NL80211_IFTYPE_MONITOR: monitor interface receiving all frames
- * @NL80211_IFTYPE_MESH_POINT: mesh point
- * @NL80211_IFTYPE_P2P_CLIENT: P2P client
- * @NL80211_IFTYPE_P2P_GO: P2P group owner
- * @NL80211_IFTYPE_MAX: highest interface type number currently defined
- * @NUM_NL80211_IFTYPES: number of defined interface types
- *
- * These values are used with the %NL80211_ATTR_IFTYPE
- * to set the type of an interface.
- *
- */
-enum nl80211_iftype {
-	NL80211_IFTYPE_UNSPECIFIED,
-	NL80211_IFTYPE_ADHOC,
-	NL80211_IFTYPE_STATION,
-	NL80211_IFTYPE_AP,
-	NL80211_IFTYPE_AP_VLAN,
-	NL80211_IFTYPE_WDS,
-	NL80211_IFTYPE_MONITOR,
-	NL80211_IFTYPE_MESH_POINT,
-	NL80211_IFTYPE_P2P_CLIENT,
-	NL80211_IFTYPE_P2P_GO,
-
-	/* keep last */
-	NUM_NL80211_IFTYPES,
-	NL80211_IFTYPE_MAX = NUM_NL80211_IFTYPES - 1
-};
-
-/**
- * enum nl80211_sta_flags - station flags
- *
- * Station flags. When a station is added to an AP interface, it is
- * assumed to be already associated (and hence authenticated.)
- *
- * @__NL80211_STA_FLAG_INVALID: attribute number 0 is reserved
- * @NL80211_STA_FLAG_AUTHORIZED: station is authorized (802.1X)
- * @NL80211_STA_FLAG_SHORT_PREAMBLE: station is capable of receiving frames
- *	with short barker preamble
- * @NL80211_STA_FLAG_WME: station is WME/QoS capable
- * @NL80211_STA_FLAG_MFP: station uses management frame protection
- * @NL80211_STA_FLAG_AUTHENTICATED: station is authenticated
- * @NL80211_STA_FLAG_TDLS_PEER: station is a TDLS peer -- this flag should
- *	only be used in managed mode (even in the flags mask). Note that the
- *	flag can't be changed, it is only valid while adding a station, and
- *	attempts to change it will silently be ignored (rather than rejected
- *	as errors.)
- * @NL80211_STA_FLAG_MAX: highest station flag number currently defined
- * @__NL80211_STA_FLAG_AFTER_LAST: internal use
- */
-enum nl80211_sta_flags {
-	__NL80211_STA_FLAG_INVALID,
-	NL80211_STA_FLAG_AUTHORIZED,
-	NL80211_STA_FLAG_SHORT_PREAMBLE,
-	NL80211_STA_FLAG_WME,
-	NL80211_STA_FLAG_MFP,
-	NL80211_STA_FLAG_AUTHENTICATED,
-	NL80211_STA_FLAG_TDLS_PEER,
-
-	/* keep last */
-	__NL80211_STA_FLAG_AFTER_LAST,
-	NL80211_STA_FLAG_MAX = __NL80211_STA_FLAG_AFTER_LAST - 1
-};
-
-/**
- * struct nl80211_sta_flag_update - station flags mask/set
- * @mask: mask of station flags to set
- * @set: which values to set them to
- *
- * Both mask and set contain bits as per &enum nl80211_sta_flags.
- */
-struct nl80211_sta_flag_update {
-	__u32 mask;
-	__u32 set;
-} __attribute__((packed));
-
-/**
- * enum nl80211_rate_info - bitrate information
- *
- * These attribute types are used with %NL80211_STA_INFO_TXRATE
- * when getting information about the bitrate of a station.
- *
- * @__NL80211_RATE_INFO_INVALID: attribute number 0 is reserved
- * @NL80211_RATE_INFO_BITRATE: total bitrate (u16, 100kbit/s)
- * @NL80211_RATE_INFO_MCS: mcs index for 802.11n (u8)
- * @NL80211_RATE_INFO_40_MHZ_WIDTH: 40 Mhz dualchannel bitrate
- * @NL80211_RATE_INFO_SHORT_GI: 400ns guard interval
- * @NL80211_RATE_INFO_MAX: highest rate_info number currently defined
- * @__NL80211_RATE_INFO_AFTER_LAST: internal use
- */
-enum nl80211_rate_info {
-	__NL80211_RATE_INFO_INVALID,
-	NL80211_RATE_INFO_BITRATE,
-	NL80211_RATE_INFO_MCS,
-	NL80211_RATE_INFO_40_MHZ_WIDTH,
-	NL80211_RATE_INFO_SHORT_GI,
-
-	/* keep last */
-	__NL80211_RATE_INFO_AFTER_LAST,
-	NL80211_RATE_INFO_MAX = __NL80211_RATE_INFO_AFTER_LAST - 1
-};
-
-/**
- * enum nl80211_sta_bss_param - BSS information collected by STA
- *
- * These attribute types are used with %NL80211_STA_INFO_BSS_PARAM
- * when getting information about the bitrate of a station.
- *
- * @__NL80211_STA_BSS_PARAM_INVALID: attribute number 0 is reserved
- * @NL80211_STA_BSS_PARAM_CTS_PROT: whether CTS protection is enabled (flag)
- * @NL80211_STA_BSS_PARAM_SHORT_PREAMBLE:  whether short preamble is enabled
- *	(flag)
- * @NL80211_STA_BSS_PARAM_SHORT_SLOT_TIME:  whether short slot time is enabled
- *	(flag)
- * @NL80211_STA_BSS_PARAM_DTIM_PERIOD: DTIM period for beaconing (u8)
- * @NL80211_STA_BSS_PARAM_BEACON_INTERVAL: Beacon interval (u16)
- * @NL80211_STA_BSS_PARAM_MAX: highest sta_bss_param number currently defined
- * @__NL80211_STA_BSS_PARAM_AFTER_LAST: internal use
- */
-enum nl80211_sta_bss_param {
-	__NL80211_STA_BSS_PARAM_INVALID,
-	NL80211_STA_BSS_PARAM_CTS_PROT,
-	NL80211_STA_BSS_PARAM_SHORT_PREAMBLE,
-	NL80211_STA_BSS_PARAM_SHORT_SLOT_TIME,
-	NL80211_STA_BSS_PARAM_DTIM_PERIOD,
-	NL80211_STA_BSS_PARAM_BEACON_INTERVAL,
-
-	/* keep last */
-	__NL80211_STA_BSS_PARAM_AFTER_LAST,
-	NL80211_STA_BSS_PARAM_MAX = __NL80211_STA_BSS_PARAM_AFTER_LAST - 1
-};
-
-/**
- * enum nl80211_sta_info - station information
- *
- * These attribute types are used with %NL80211_ATTR_STA_INFO
- * when getting information about a station.
- *
- * @__NL80211_STA_INFO_INVALID: attribute number 0 is reserved
- * @NL80211_STA_INFO_INACTIVE_TIME: time since last activity (u32, msecs)
- * @NL80211_STA_INFO_RX_BYTES: total received bytes (u32, from this station)
- * @NL80211_STA_INFO_TX_BYTES: total transmitted bytes (u32, to this station)
- * @NL80211_STA_INFO_SIGNAL: signal strength of last received PPDU (u8, dBm)
- * @NL80211_STA_INFO_TX_BITRATE: current unicast tx rate, nested attribute
- * 	containing info as possible, see &enum nl80211_rate_info
- * @NL80211_STA_INFO_RX_PACKETS: total received packet (u32, from this station)
- * @NL80211_STA_INFO_TX_PACKETS: total transmitted packets (u32, to this
- *	station)
- * @NL80211_STA_INFO_TX_RETRIES: total retries (u32, to this station)
- * @NL80211_STA_INFO_TX_FAILED: total failed packets (u32, to this station)
- * @NL80211_STA_INFO_SIGNAL_AVG: signal strength average (u8, dBm)
- * @NL80211_STA_INFO_LLID: the station's mesh LLID
- * @NL80211_STA_INFO_PLID: the station's mesh PLID
- * @NL80211_STA_INFO_PLINK_STATE: peer link state for the station
- *	(see %enum nl80211_plink_state)
- * @NL80211_STA_INFO_RX_BITRATE: last unicast data frame rx rate, nested
- *	attribute, like NL80211_STA_INFO_TX_BITRATE.
- * @NL80211_STA_INFO_BSS_PARAM: current station's view of BSS, nested attribute
- *     containing info as possible, see &enum nl80211_sta_bss_param
- * @NL80211_STA_INFO_CONNECTED_TIME: time since the station is last connected
- * @NL80211_STA_INFO_STA_FLAGS: Contains a struct nl80211_sta_flag_update.
- * @NL80211_STA_INFO_BEACON_LOSS: count of times beacon loss was detected (u32)
- * @__NL80211_STA_INFO_AFTER_LAST: internal
- * @NL80211_STA_INFO_MAX: highest possible station info attribute
- */
-enum nl80211_sta_info {
-	__NL80211_STA_INFO_INVALID,
-	NL80211_STA_INFO_INACTIVE_TIME,
-	NL80211_STA_INFO_RX_BYTES,
-	NL80211_STA_INFO_TX_BYTES,
-	NL80211_STA_INFO_LLID,
-	NL80211_STA_INFO_PLID,
-	NL80211_STA_INFO_PLINK_STATE,
-	NL80211_STA_INFO_SIGNAL,
-	NL80211_STA_INFO_TX_BITRATE,
-	NL80211_STA_INFO_RX_PACKETS,
-	NL80211_STA_INFO_TX_PACKETS,
-	NL80211_STA_INFO_TX_RETRIES,
-	NL80211_STA_INFO_TX_FAILED,
-	NL80211_STA_INFO_SIGNAL_AVG,
-	NL80211_STA_INFO_RX_BITRATE,
-	NL80211_STA_INFO_BSS_PARAM,
-	NL80211_STA_INFO_CONNECTED_TIME,
-	NL80211_STA_INFO_STA_FLAGS,
-	NL80211_STA_INFO_BEACON_LOSS,
-
-	/* keep last */
-	__NL80211_STA_INFO_AFTER_LAST,
-	NL80211_STA_INFO_MAX = __NL80211_STA_INFO_AFTER_LAST - 1
-};
-
-/**
- * enum nl80211_mpath_flags - nl80211 mesh path flags
- *
- * @NL80211_MPATH_FLAG_ACTIVE: the mesh path is active
- * @NL80211_MPATH_FLAG_RESOLVING: the mesh path discovery process is running
- * @NL80211_MPATH_FLAG_SN_VALID: the mesh path contains a valid SN
- * @NL80211_MPATH_FLAG_FIXED: the mesh path has been manually set
- * @NL80211_MPATH_FLAG_RESOLVED: the mesh path discovery process succeeded
- */
-enum nl80211_mpath_flags {
-	NL80211_MPATH_FLAG_ACTIVE =	1<<0,
-	NL80211_MPATH_FLAG_RESOLVING =	1<<1,
-	NL80211_MPATH_FLAG_SN_VALID =	1<<2,
-	NL80211_MPATH_FLAG_FIXED =	1<<3,
-	NL80211_MPATH_FLAG_RESOLVED =	1<<4,
-};
-
-/**
- * enum nl80211_mpath_info - mesh path information
- *
- * These attribute types are used with %NL80211_ATTR_MPATH_INFO when getting
- * information about a mesh path.
- *
- * @__NL80211_MPATH_INFO_INVALID: attribute number 0 is reserved
- * @NL80211_MPATH_INFO_FRAME_QLEN: number of queued frames for this destination
- * @NL80211_MPATH_INFO_SN: destination sequence number
- * @NL80211_MPATH_INFO_METRIC: metric (cost) of this mesh path
- * @NL80211_MPATH_INFO_EXPTIME: expiration time for the path, in msec from now
- * @NL80211_MPATH_INFO_FLAGS: mesh path flags, enumerated in
- * 	&enum nl80211_mpath_flags;
- * @NL80211_MPATH_INFO_DISCOVERY_TIMEOUT: total path discovery timeout, in msec
- * @NL80211_MPATH_INFO_DISCOVERY_RETRIES: mesh path discovery retries
- * @NL80211_MPATH_INFO_MAX: highest mesh path information attribute number
- *	currently defind
- * @__NL80211_MPATH_INFO_AFTER_LAST: internal use
- */
-enum nl80211_mpath_info {
-	__NL80211_MPATH_INFO_INVALID,
-	NL80211_MPATH_INFO_FRAME_QLEN,
-	NL80211_MPATH_INFO_SN,
-	NL80211_MPATH_INFO_METRIC,
-	NL80211_MPATH_INFO_EXPTIME,
-	NL80211_MPATH_INFO_FLAGS,
-	NL80211_MPATH_INFO_DISCOVERY_TIMEOUT,
-	NL80211_MPATH_INFO_DISCOVERY_RETRIES,
-
-	/* keep last */
-	__NL80211_MPATH_INFO_AFTER_LAST,
-	NL80211_MPATH_INFO_MAX = __NL80211_MPATH_INFO_AFTER_LAST - 1
-};
-
-/**
- * enum nl80211_band_attr - band attributes
- * @__NL80211_BAND_ATTR_INVALID: attribute number 0 is reserved
- * @NL80211_BAND_ATTR_FREQS: supported frequencies in this band,
- *	an array of nested frequency attributes
- * @NL80211_BAND_ATTR_RATES: supported bitrates in this band,
- *	an array of nested bitrate attributes
- * @NL80211_BAND_ATTR_HT_MCS_SET: 16-byte attribute containing the MCS set as
- *	defined in 802.11n
- * @NL80211_BAND_ATTR_HT_CAPA: HT capabilities, as in the HT information IE
- * @NL80211_BAND_ATTR_HT_AMPDU_FACTOR: A-MPDU factor, as in 11n
- * @NL80211_BAND_ATTR_HT_AMPDU_DENSITY: A-MPDU density, as in 11n
- * @NL80211_BAND_ATTR_MAX: highest band attribute currently defined
- * @__NL80211_BAND_ATTR_AFTER_LAST: internal use
- */
-enum nl80211_band_attr {
-	__NL80211_BAND_ATTR_INVALID,
-	NL80211_BAND_ATTR_FREQS,
-	NL80211_BAND_ATTR_RATES,
-
-	NL80211_BAND_ATTR_HT_MCS_SET,
-	NL80211_BAND_ATTR_HT_CAPA,
-	NL80211_BAND_ATTR_HT_AMPDU_FACTOR,
-	NL80211_BAND_ATTR_HT_AMPDU_DENSITY,
-
-	/* keep last */
-	__NL80211_BAND_ATTR_AFTER_LAST,
-	NL80211_BAND_ATTR_MAX = __NL80211_BAND_ATTR_AFTER_LAST - 1
-};
-
-#define NL80211_BAND_ATTR_HT_CAPA NL80211_BAND_ATTR_HT_CAPA
-
-/**
- * enum nl80211_frequency_attr - frequency attributes
- * @__NL80211_FREQUENCY_ATTR_INVALID: attribute number 0 is reserved
- * @NL80211_FREQUENCY_ATTR_FREQ: Frequency in MHz
- * @NL80211_FREQUENCY_ATTR_DISABLED: Channel is disabled in current
- *	regulatory domain.
- * @NL80211_FREQUENCY_ATTR_PASSIVE_SCAN: Only passive scanning is
- *	permitted on this channel in current regulatory domain.
- * @NL80211_FREQUENCY_ATTR_NO_IBSS: IBSS networks are not permitted
- *	on this channel in current regulatory domain.
- * @NL80211_FREQUENCY_ATTR_RADAR: Radar detection is mandatory
- *	on this channel in current regulatory domain.
- * @NL80211_FREQUENCY_ATTR_MAX_TX_POWER: Maximum transmission power in mBm
- *	(100 * dBm).
- * @NL80211_FREQUENCY_ATTR_MAX: highest frequency attribute number
- *	currently defined
- * @__NL80211_FREQUENCY_ATTR_AFTER_LAST: internal use
- */
-enum nl80211_frequency_attr {
-	__NL80211_FREQUENCY_ATTR_INVALID,
-	NL80211_FREQUENCY_ATTR_FREQ,
-	NL80211_FREQUENCY_ATTR_DISABLED,
-	NL80211_FREQUENCY_ATTR_PASSIVE_SCAN,
-	NL80211_FREQUENCY_ATTR_NO_IBSS,
-	NL80211_FREQUENCY_ATTR_RADAR,
-	NL80211_FREQUENCY_ATTR_MAX_TX_POWER,
-
-	/* keep last */
-	__NL80211_FREQUENCY_ATTR_AFTER_LAST,
-	NL80211_FREQUENCY_ATTR_MAX = __NL80211_FREQUENCY_ATTR_AFTER_LAST - 1
-};
-
-#define NL80211_FREQUENCY_ATTR_MAX_TX_POWER NL80211_FREQUENCY_ATTR_MAX_TX_POWER
-
-/**
- * enum nl80211_bitrate_attr - bitrate attributes
- * @__NL80211_BITRATE_ATTR_INVALID: attribute number 0 is reserved
- * @NL80211_BITRATE_ATTR_RATE: Bitrate in units of 100 kbps
- * @NL80211_BITRATE_ATTR_2GHZ_SHORTPREAMBLE: Short preamble supported
- *	in 2.4 GHz band.
- * @NL80211_BITRATE_ATTR_MAX: highest bitrate attribute number
- *	currently defined
- * @__NL80211_BITRATE_ATTR_AFTER_LAST: internal use
- */
-enum nl80211_bitrate_attr {
-	__NL80211_BITRATE_ATTR_INVALID,
-	NL80211_BITRATE_ATTR_RATE,
-	NL80211_BITRATE_ATTR_2GHZ_SHORTPREAMBLE,
-
-	/* keep last */
-	__NL80211_BITRATE_ATTR_AFTER_LAST,
-	NL80211_BITRATE_ATTR_MAX = __NL80211_BITRATE_ATTR_AFTER_LAST - 1
-};
-
-/**
- * enum nl80211_initiator - Indicates the initiator of a reg domain request
- * @NL80211_REGDOM_SET_BY_CORE: Core queried CRDA for a dynamic world
- * 	regulatory domain.
- * @NL80211_REGDOM_SET_BY_USER: User asked the wireless core to set the
- * 	regulatory domain.
- * @NL80211_REGDOM_SET_BY_DRIVER: a wireless drivers has hinted to the
- * 	wireless core it thinks its knows the regulatory domain we should be in.
- * @NL80211_REGDOM_SET_BY_COUNTRY_IE: the wireless core has received an
- * 	802.11 country information element with regulatory information it
- * 	thinks we should consider. cfg80211 only processes the country
- *	code from the IE, and relies on the regulatory domain information
- *	structure passed by userspace (CRDA) from our wireless-regdb.
- *	If a channel is enabled but the country code indicates it should
- *	be disabled we disable the channel and re-enable it upon disassociation.
- */
-enum nl80211_reg_initiator {
-	NL80211_REGDOM_SET_BY_CORE,
-	NL80211_REGDOM_SET_BY_USER,
-	NL80211_REGDOM_SET_BY_DRIVER,
-	NL80211_REGDOM_SET_BY_COUNTRY_IE,
-};
-
-/**
- * enum nl80211_reg_type - specifies the type of regulatory domain
- * @NL80211_REGDOM_TYPE_COUNTRY: the regulatory domain set is one that pertains
- *	to a specific country. When this is set you can count on the
- *	ISO / IEC 3166 alpha2 country code being valid.
- * @NL80211_REGDOM_TYPE_WORLD: the regulatory set domain is the world regulatory
- * 	domain.
- * @NL80211_REGDOM_TYPE_CUSTOM_WORLD: the regulatory domain set is a custom
- * 	driver specific world regulatory domain. These do not apply system-wide
- * 	and are only applicable to the individual devices which have requested
- * 	them to be applied.
- * @NL80211_REGDOM_TYPE_INTERSECTION: the regulatory domain set is the product
- *	of an intersection between two regulatory domains -- the previously
- *	set regulatory domain on the system and the last accepted regulatory
- *	domain request to be processed.
- */
-enum nl80211_reg_type {
-	NL80211_REGDOM_TYPE_COUNTRY,
-	NL80211_REGDOM_TYPE_WORLD,
-	NL80211_REGDOM_TYPE_CUSTOM_WORLD,
-	NL80211_REGDOM_TYPE_INTERSECTION,
-};
-
-/**
- * enum nl80211_reg_rule_attr - regulatory rule attributes
- * @__NL80211_REG_RULE_ATTR_INVALID: attribute number 0 is reserved
- * @NL80211_ATTR_REG_RULE_FLAGS: a set of flags which specify additional
- * 	considerations for a given frequency range. These are the
- * 	&enum nl80211_reg_rule_flags.
- * @NL80211_ATTR_FREQ_RANGE_START: starting frequencry for the regulatory
- * 	rule in KHz. This is not a center of frequency but an actual regulatory
- * 	band edge.
- * @NL80211_ATTR_FREQ_RANGE_END: ending frequency for the regulatory rule
- * 	in KHz. This is not a center a frequency but an actual regulatory
- * 	band edge.
- * @NL80211_ATTR_FREQ_RANGE_MAX_BW: maximum allowed bandwidth for this
- * 	frequency range, in KHz.
- * @NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN: the maximum allowed antenna gain
- * 	for a given frequency range. The value is in mBi (100 * dBi).
- * 	If you don't have one then don't send this.
- * @NL80211_ATTR_POWER_RULE_MAX_EIRP: the maximum allowed EIRP for
- * 	a given frequency range. The value is in mBm (100 * dBm).
- * @NL80211_REG_RULE_ATTR_MAX: highest regulatory rule attribute number
- *	currently defined
- * @__NL80211_REG_RULE_ATTR_AFTER_LAST: internal use
- */
-enum nl80211_reg_rule_attr {
-	__NL80211_REG_RULE_ATTR_INVALID,
-	NL80211_ATTR_REG_RULE_FLAGS,
-
-	NL80211_ATTR_FREQ_RANGE_START,
-	NL80211_ATTR_FREQ_RANGE_END,
-	NL80211_ATTR_FREQ_RANGE_MAX_BW,
-
-	NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN,
-	NL80211_ATTR_POWER_RULE_MAX_EIRP,
-
-	/* keep last */
-	__NL80211_REG_RULE_ATTR_AFTER_LAST,
-	NL80211_REG_RULE_ATTR_MAX = __NL80211_REG_RULE_ATTR_AFTER_LAST - 1
-};
-
-/**
- * enum nl80211_sched_scan_match_attr - scheduled scan match attributes
- * @__NL80211_SCHED_SCAN_MATCH_ATTR_INVALID: attribute number 0 is reserved
- * @NL80211_SCHED_SCAN_MATCH_ATTR_SSID: SSID to be used for matching,
- * only report BSS with matching SSID.
- * @NL80211_SCHED_SCAN_MATCH_ATTR_MAX: highest scheduled scan filter
- *	attribute number currently defined
- * @__NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST: internal use
- */
-enum nl80211_sched_scan_match_attr {
-	__NL80211_SCHED_SCAN_MATCH_ATTR_INVALID,
-
-	NL80211_ATTR_SCHED_SCAN_MATCH_SSID,
-
-	/* keep last */
-	__NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST,
-	NL80211_SCHED_SCAN_MATCH_ATTR_MAX =
-		__NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST - 1
-};
-
-/**
- * enum nl80211_reg_rule_flags - regulatory rule flags
- *
- * @NL80211_RRF_NO_OFDM: OFDM modulation not allowed
- * @NL80211_RRF_NO_CCK: CCK modulation not allowed
- * @NL80211_RRF_NO_INDOOR: indoor operation not allowed
- * @NL80211_RRF_NO_OUTDOOR: outdoor operation not allowed
- * @NL80211_RRF_DFS: DFS support is required to be used
- * @NL80211_RRF_PTP_ONLY: this is only for Point To Point links
- * @NL80211_RRF_PTMP_ONLY: this is only for Point To Multi Point links
- * @NL80211_RRF_PASSIVE_SCAN: passive scan is required
- * @NL80211_RRF_NO_IBSS: no IBSS is allowed
- */
-enum nl80211_reg_rule_flags {
-	NL80211_RRF_NO_OFDM		= 1<<0,
-	NL80211_RRF_NO_CCK		= 1<<1,
-	NL80211_RRF_NO_INDOOR		= 1<<2,
-	NL80211_RRF_NO_OUTDOOR		= 1<<3,
-	NL80211_RRF_DFS			= 1<<4,
-	NL80211_RRF_PTP_ONLY		= 1<<5,
-	NL80211_RRF_PTMP_ONLY		= 1<<6,
-	NL80211_RRF_PASSIVE_SCAN	= 1<<7,
-	NL80211_RRF_NO_IBSS		= 1<<8,
-};
-
-/**
- * enum nl80211_dfs_regions - regulatory DFS regions
- *
- * @NL80211_DFS_UNSET: Country has no DFS master region specified
- * @NL80211_DFS_FCC_: Country follows DFS master rules from FCC
- * @NL80211_DFS_FCC_: Country follows DFS master rules from ETSI
- * @NL80211_DFS_JP_: Country follows DFS master rules from JP/MKK/Telec
- */
-enum nl80211_dfs_regions {
-	NL80211_DFS_UNSET	= 0,
-	NL80211_DFS_FCC		= 1,
-	NL80211_DFS_ETSI	= 2,
-	NL80211_DFS_JP		= 3,
-};
-
-/**
- * enum nl80211_survey_info - survey information
- *
- * These attribute types are used with %NL80211_ATTR_SURVEY_INFO
- * when getting information about a survey.
- *
- * @__NL80211_SURVEY_INFO_INVALID: attribute number 0 is reserved
- * @NL80211_SURVEY_INFO_FREQUENCY: center frequency of channel
- * @NL80211_SURVEY_INFO_NOISE: noise level of channel (u8, dBm)
- * @NL80211_SURVEY_INFO_IN_USE: channel is currently being used
- * @NL80211_SURVEY_INFO_CHANNEL_TIME: amount of time (in ms) that the radio
- *	spent on this channel
- * @NL80211_SURVEY_INFO_CHANNEL_TIME_BUSY: amount of the time the primary
- *	channel was sensed busy (either due to activity or energy detect)
- * @NL80211_SURVEY_INFO_CHANNEL_TIME_EXT_BUSY: amount of time the extension
- *	channel was sensed busy
- * @NL80211_SURVEY_INFO_CHANNEL_TIME_RX: amount of time the radio spent
- *	receiving data
- * @NL80211_SURVEY_INFO_CHANNEL_TIME_TX: amount of time the radio spent
- *	transmitting data
- * @NL80211_SURVEY_INFO_MAX: highest survey info attribute number
- *	currently defined
- * @__NL80211_SURVEY_INFO_AFTER_LAST: internal use
- */
-enum nl80211_survey_info {
-	__NL80211_SURVEY_INFO_INVALID,
-	NL80211_SURVEY_INFO_FREQUENCY,
-	NL80211_SURVEY_INFO_NOISE,
-	NL80211_SURVEY_INFO_IN_USE,
-	NL80211_SURVEY_INFO_CHANNEL_TIME,
-	NL80211_SURVEY_INFO_CHANNEL_TIME_BUSY,
-	NL80211_SURVEY_INFO_CHANNEL_TIME_EXT_BUSY,
-	NL80211_SURVEY_INFO_CHANNEL_TIME_RX,
-	NL80211_SURVEY_INFO_CHANNEL_TIME_TX,
-
-	/* keep last */
-	__NL80211_SURVEY_INFO_AFTER_LAST,
-	NL80211_SURVEY_INFO_MAX = __NL80211_SURVEY_INFO_AFTER_LAST - 1
-};
-
-/**
- * enum nl80211_mntr_flags - monitor configuration flags
- *
- * Monitor configuration flags.
- *
- * @__NL80211_MNTR_FLAG_INVALID: reserved
- *
- * @NL80211_MNTR_FLAG_FCSFAIL: pass frames with bad FCS
- * @NL80211_MNTR_FLAG_PLCPFAIL: pass frames with bad PLCP
- * @NL80211_MNTR_FLAG_CONTROL: pass control frames
- * @NL80211_MNTR_FLAG_OTHER_BSS: disable BSSID filtering
- * @NL80211_MNTR_FLAG_COOK_FRAMES: report frames after processing.
- *	overrides all other flags.
- *
- * @__NL80211_MNTR_FLAG_AFTER_LAST: internal use
- * @NL80211_MNTR_FLAG_MAX: highest possible monitor flag
- */
-enum nl80211_mntr_flags {
-	__NL80211_MNTR_FLAG_INVALID,
-	NL80211_MNTR_FLAG_FCSFAIL,
-	NL80211_MNTR_FLAG_PLCPFAIL,
-	NL80211_MNTR_FLAG_CONTROL,
-	NL80211_MNTR_FLAG_OTHER_BSS,
-	NL80211_MNTR_FLAG_COOK_FRAMES,
-
-	/* keep last */
-	__NL80211_MNTR_FLAG_AFTER_LAST,
-	NL80211_MNTR_FLAG_MAX = __NL80211_MNTR_FLAG_AFTER_LAST - 1
-};
-
-/**
- * enum nl80211_meshconf_params - mesh configuration parameters
- *
- * Mesh configuration parameters. These can be changed while the mesh is
- * active.
- *
- * @__NL80211_MESHCONF_INVALID: internal use
- *
- * @NL80211_MESHCONF_RETRY_TIMEOUT: specifies the initial retry timeout in
- * millisecond units, used by the Peer Link Open message
- *
- * @NL80211_MESHCONF_CONFIRM_TIMEOUT: specifies the initial confirm timeout, in
- * millisecond units, used by the peer link management to close a peer link
- *
- * @NL80211_MESHCONF_HOLDING_TIMEOUT: specifies the holding timeout, in
- * millisecond units
- *
- * @NL80211_MESHCONF_MAX_PEER_LINKS: maximum number of peer links allowed
- * on this mesh interface
- *
- * @NL80211_MESHCONF_MAX_RETRIES: specifies the maximum number of peer link
- * open retries that can be sent to establish a new peer link instance in a
- * mesh
- *
- * @NL80211_MESHCONF_TTL: specifies the value of TTL field set at a source mesh
- * point.
- *
- * @NL80211_MESHCONF_AUTO_OPEN_PLINKS: whether we should automatically
- * open peer links when we detect compatible mesh peers.
- *
- * @NL80211_MESHCONF_HWMP_MAX_PREQ_RETRIES: the number of action frames
- * containing a PREQ that an MP can send to a particular destination (path
- * target)
- *
- * @NL80211_MESHCONF_PATH_REFRESH_TIME: how frequently to refresh mesh paths
- * (in milliseconds)
- *
- * @NL80211_MESHCONF_MIN_DISCOVERY_TIMEOUT: minimum length of time to wait
- * until giving up on a path discovery (in milliseconds)
- *
- * @NL80211_MESHCONF_HWMP_ACTIVE_PATH_TIMEOUT: The time (in TUs) for which mesh
- * points receiving a PREQ shall consider the forwarding information from the
- * root to be valid. (TU = time unit)
- *
- * @NL80211_MESHCONF_HWMP_PREQ_MIN_INTERVAL: The minimum interval of time (in
- * TUs) during which an MP can send only one action frame containing a PREQ
- * reference element
- *
- * @NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME: The interval of time (in TUs)
- * that it takes for an HWMP information element to propagate across the mesh
- *
- * @NL80211_MESHCONF_HWMP_ROOTMODE: whether root mode is enabled or not
- *
- * @NL80211_MESHCONF_ELEMENT_TTL: specifies the value of TTL field set at a
- * source mesh point for path selection elements.
- *
- * @NL80211_MESHCONF_HWMP_RANN_INTERVAL:  The interval of time (in TUs) between
- * root announcements are transmitted.
- *
- * @NL80211_MESHCONF_GATE_ANNOUNCEMENTS: Advertise that this mesh station has
- * access to a broader network beyond the MBSS.  This is done via Root
- * Announcement frames.
- *
- * @NL80211_MESHCONF_HWMP_PERR_MIN_INTERVAL: The minimum interval of time (in
- * TUs) during which a mesh STA can send only one Action frame containing a
- * PERR element.
- *
- * @NL80211_MESHCONF_FORWARDING: set Mesh STA as forwarding or non-forwarding
- * or forwarding entity (default is TRUE - forwarding entity)
- *
- * @NL80211_MESHCONF_RSSI_THRESHOLD: RSSI threshold in dBm. This specifies the
- * threshold for average signal strength of candidate station to establish
- * a peer link.
- *
- * @NL80211_MESHCONF_ATTR_MAX: highest possible mesh configuration attribute
- *
- * @__NL80211_MESHCONF_ATTR_AFTER_LAST: internal use
- */
-enum nl80211_meshconf_params {
-	__NL80211_MESHCONF_INVALID,
-	NL80211_MESHCONF_RETRY_TIMEOUT,
-	NL80211_MESHCONF_CONFIRM_TIMEOUT,
-	NL80211_MESHCONF_HOLDING_TIMEOUT,
-	NL80211_MESHCONF_MAX_PEER_LINKS,
-	NL80211_MESHCONF_MAX_RETRIES,
-	NL80211_MESHCONF_TTL,
-	NL80211_MESHCONF_AUTO_OPEN_PLINKS,
-	NL80211_MESHCONF_HWMP_MAX_PREQ_RETRIES,
-	NL80211_MESHCONF_PATH_REFRESH_TIME,
-	NL80211_MESHCONF_MIN_DISCOVERY_TIMEOUT,
-	NL80211_MESHCONF_HWMP_ACTIVE_PATH_TIMEOUT,
-	NL80211_MESHCONF_HWMP_PREQ_MIN_INTERVAL,
-	NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME,
-	NL80211_MESHCONF_HWMP_ROOTMODE,
-	NL80211_MESHCONF_ELEMENT_TTL,
-	NL80211_MESHCONF_HWMP_RANN_INTERVAL,
-	NL80211_MESHCONF_GATE_ANNOUNCEMENTS,
-	NL80211_MESHCONF_HWMP_PERR_MIN_INTERVAL,
-	NL80211_MESHCONF_FORWARDING,
-	NL80211_MESHCONF_RSSI_THRESHOLD,
-
-	/* keep last */
-	__NL80211_MESHCONF_ATTR_AFTER_LAST,
-	NL80211_MESHCONF_ATTR_MAX = __NL80211_MESHCONF_ATTR_AFTER_LAST - 1
-};
-
-/**
- * enum nl80211_mesh_setup_params - mesh setup parameters
- *
- * Mesh setup parameters.  These are used to start/join a mesh and cannot be
- * changed while the mesh is active.
- *
- * @__NL80211_MESH_SETUP_INVALID: Internal use
- *
- * @NL80211_MESH_SETUP_ENABLE_VENDOR_PATH_SEL: Enable this option to use a
- * vendor specific path selection algorithm or disable it to use the default
- * HWMP.
- *
- * @NL80211_MESH_SETUP_ENABLE_VENDOR_METRIC: Enable this option to use a
- * vendor specific path metric or disable it to use the default Airtime
- * metric.
- *
- * @NL80211_MESH_SETUP_IE: Information elements for this mesh, for instance, a
- * robust security network ie, or a vendor specific information element that
- * vendors will use to identify the path selection methods and metrics in use.
- *
- * @NL80211_MESH_SETUP_USERSPACE_AUTH: Enable this option if an authentication
- * daemon will be authenticating mesh candidates.
- *
- * @NL80211_MESH_SETUP_USERSPACE_AMPE: Enable this option if an authentication
- * daemon will be securing peer link frames.  AMPE is a secured version of Mesh
- * Peering Management (MPM) and is implemented with the assistance of a
- * userspace daemon.  When this flag is set, the kernel will send peer
- * management frames to a userspace daemon that will implement AMPE
- * functionality (security capabilities selection, key confirmation, and key
- * management).  When the flag is unset (default), the kernel can autonomously
- * complete (unsecured) mesh peering without the need of a userspace daemon.
- *
- * @NL80211_MESH_SETUP_ATTR_MAX: highest possible mesh setup attribute number
- * @__NL80211_MESH_SETUP_ATTR_AFTER_LAST: Internal use
- */
-enum nl80211_mesh_setup_params {
-	__NL80211_MESH_SETUP_INVALID,
-	NL80211_MESH_SETUP_ENABLE_VENDOR_PATH_SEL,
-	NL80211_MESH_SETUP_ENABLE_VENDOR_METRIC,
-	NL80211_MESH_SETUP_IE,
-	NL80211_MESH_SETUP_USERSPACE_AUTH,
-	NL80211_MESH_SETUP_USERSPACE_AMPE,
-
-	/* keep last */
-	__NL80211_MESH_SETUP_ATTR_AFTER_LAST,
-	NL80211_MESH_SETUP_ATTR_MAX = __NL80211_MESH_SETUP_ATTR_AFTER_LAST - 1
-};
-
-/**
- * enum nl80211_txq_attr - TX queue parameter attributes
- * @__NL80211_TXQ_ATTR_INVALID: Attribute number 0 is reserved
- * @NL80211_TXQ_ATTR_QUEUE: TX queue identifier (NL80211_TXQ_Q_*)
- * @NL80211_TXQ_ATTR_TXOP: Maximum burst time in units of 32 usecs, 0 meaning
- *	disabled
- * @NL80211_TXQ_ATTR_CWMIN: Minimum contention window [a value of the form
- *	2^n-1 in the range 1..32767]
- * @NL80211_TXQ_ATTR_CWMAX: Maximum contention window [a value of the form
- *	2^n-1 in the range 1..32767]
- * @NL80211_TXQ_ATTR_AIFS: Arbitration interframe space [0..255]
- * @__NL80211_TXQ_ATTR_AFTER_LAST: Internal
- * @NL80211_TXQ_ATTR_MAX: Maximum TXQ attribute number
- */
-enum nl80211_txq_attr {
-	__NL80211_TXQ_ATTR_INVALID,
-	NL80211_TXQ_ATTR_QUEUE,
-	NL80211_TXQ_ATTR_TXOP,
-	NL80211_TXQ_ATTR_CWMIN,
-	NL80211_TXQ_ATTR_CWMAX,
-	NL80211_TXQ_ATTR_AIFS,
-
-	/* keep last */
-	__NL80211_TXQ_ATTR_AFTER_LAST,
-	NL80211_TXQ_ATTR_MAX = __NL80211_TXQ_ATTR_AFTER_LAST - 1
-};
-
-enum nl80211_txq_q {
-	NL80211_TXQ_Q_VO,
-	NL80211_TXQ_Q_VI,
-	NL80211_TXQ_Q_BE,
-	NL80211_TXQ_Q_BK
-};
-
-enum nl80211_channel_type {
-	NL80211_CHAN_NO_HT,
-	NL80211_CHAN_HT20,
-	NL80211_CHAN_HT40MINUS,
-	NL80211_CHAN_HT40PLUS
-};
-
-/**
- * enum nl80211_bss - netlink attributes for a BSS
- *
- * @__NL80211_BSS_INVALID: invalid
- * @NL80211_BSS_BSSID: BSSID of the BSS (6 octets)
- * @NL80211_BSS_FREQUENCY: frequency in MHz (u32)
- * @NL80211_BSS_TSF: TSF of the received probe response/beacon (u64)
- * @NL80211_BSS_BEACON_INTERVAL: beacon interval of the (I)BSS (u16)
- * @NL80211_BSS_CAPABILITY: capability field (CPU order, u16)
- * @NL80211_BSS_INFORMATION_ELEMENTS: binary attribute containing the
- *	raw information elements from the probe response/beacon (bin);
- *	if the %NL80211_BSS_BEACON_IES attribute is present, the IEs here are
- *	from a Probe Response frame; otherwise they are from a Beacon frame.
- *	However, if the driver does not indicate the source of the IEs, these
- *	IEs may be from either frame subtype.
- * @NL80211_BSS_SIGNAL_MBM: signal strength of probe response/beacon
- *	in mBm (100 * dBm) (s32)
- * @NL80211_BSS_SIGNAL_UNSPEC: signal strength of the probe response/beacon
- *	in unspecified units, scaled to 0..100 (u8)
- * @NL80211_BSS_STATUS: status, if this BSS is "used"
- * @NL80211_BSS_SEEN_MS_AGO: age of this BSS entry in ms
- * @NL80211_BSS_BEACON_IES: binary attribute containing the raw information
- *	elements from a Beacon frame (bin); not present if no Beacon frame has
- *	yet been received
- * @__NL80211_BSS_AFTER_LAST: internal
- * @NL80211_BSS_MAX: highest BSS attribute
- */
-enum nl80211_bss {
-	__NL80211_BSS_INVALID,
-	NL80211_BSS_BSSID,
-	NL80211_BSS_FREQUENCY,
-	NL80211_BSS_TSF,
-	NL80211_BSS_BEACON_INTERVAL,
-	NL80211_BSS_CAPABILITY,
-	NL80211_BSS_INFORMATION_ELEMENTS,
-	NL80211_BSS_SIGNAL_MBM,
-	NL80211_BSS_SIGNAL_UNSPEC,
-	NL80211_BSS_STATUS,
-	NL80211_BSS_SEEN_MS_AGO,
-	NL80211_BSS_BEACON_IES,
-
-	/* keep last */
-	__NL80211_BSS_AFTER_LAST,
-	NL80211_BSS_MAX = __NL80211_BSS_AFTER_LAST - 1
-};
-
-/**
- * enum nl80211_bss_status - BSS "status"
- * @NL80211_BSS_STATUS_AUTHENTICATED: Authenticated with this BSS.
- * @NL80211_BSS_STATUS_ASSOCIATED: Associated with this BSS.
- * @NL80211_BSS_STATUS_IBSS_JOINED: Joined to this IBSS.
- *
- * The BSS status is a BSS attribute in scan dumps, which
- * indicates the status the interface has wrt. this BSS.
- */
-enum nl80211_bss_status {
-	NL80211_BSS_STATUS_AUTHENTICATED,
-	NL80211_BSS_STATUS_ASSOCIATED,
-	NL80211_BSS_STATUS_IBSS_JOINED,
-};
-
-/**
- * enum nl80211_auth_type - AuthenticationType
- *
- * @NL80211_AUTHTYPE_OPEN_SYSTEM: Open System authentication
- * @NL80211_AUTHTYPE_SHARED_KEY: Shared Key authentication (WEP only)
- * @NL80211_AUTHTYPE_FT: Fast BSS Transition (IEEE 802.11r)
- * @NL80211_AUTHTYPE_NETWORK_EAP: Network EAP (some Cisco APs and mainly LEAP)
- * @__NL80211_AUTHTYPE_NUM: internal
- * @NL80211_AUTHTYPE_MAX: maximum valid auth algorithm
- * @NL80211_AUTHTYPE_AUTOMATIC: determine automatically (if necessary by
- *	trying multiple times); this is invalid in netlink -- leave out
- *	the attribute for this on CONNECT commands.
- */
-enum nl80211_auth_type {
-	NL80211_AUTHTYPE_OPEN_SYSTEM,
-	NL80211_AUTHTYPE_SHARED_KEY,
-	NL80211_AUTHTYPE_FT,
-	NL80211_AUTHTYPE_NETWORK_EAP,
-
-	/* keep last */
-	__NL80211_AUTHTYPE_NUM,
-	NL80211_AUTHTYPE_MAX = __NL80211_AUTHTYPE_NUM - 1,
-	NL80211_AUTHTYPE_AUTOMATIC
-};
-
-/**
- * enum nl80211_key_type - Key Type
- * @NL80211_KEYTYPE_GROUP: Group (broadcast/multicast) key
- * @NL80211_KEYTYPE_PAIRWISE: Pairwise (unicast/individual) key
- * @NL80211_KEYTYPE_PEERKEY: PeerKey (DLS)
- * @NUM_NL80211_KEYTYPES: number of defined key types
- */
-enum nl80211_key_type {
-	NL80211_KEYTYPE_GROUP,
-	NL80211_KEYTYPE_PAIRWISE,
-	NL80211_KEYTYPE_PEERKEY,
-
-	NUM_NL80211_KEYTYPES
-};
-
-/**
- * enum nl80211_mfp - Management frame protection state
- * @NL80211_MFP_NO: Management frame protection not used
- * @NL80211_MFP_REQUIRED: Management frame protection required
- */
-enum nl80211_mfp {
-	NL80211_MFP_NO,
-	NL80211_MFP_REQUIRED,
-};
-
-enum nl80211_wpa_versions {
-	NL80211_WPA_VERSION_1 = 1 << 0,
-	NL80211_WPA_VERSION_2 = 1 << 1,
-};
-
-/**
- * enum nl80211_key_default_types - key default types
- * @__NL80211_KEY_DEFAULT_TYPE_INVALID: invalid
- * @NL80211_KEY_DEFAULT_TYPE_UNICAST: key should be used as default
- *	unicast key
- * @NL80211_KEY_DEFAULT_TYPE_MULTICAST: key should be used as default
- *	multicast key
- * @NUM_NL80211_KEY_DEFAULT_TYPES: number of default types
- */
-enum nl80211_key_default_types {
-	__NL80211_KEY_DEFAULT_TYPE_INVALID,
-	NL80211_KEY_DEFAULT_TYPE_UNICAST,
-	NL80211_KEY_DEFAULT_TYPE_MULTICAST,
-
-	NUM_NL80211_KEY_DEFAULT_TYPES
-};
-
-/**
- * enum nl80211_key_attributes - key attributes
- * @__NL80211_KEY_INVALID: invalid
- * @NL80211_KEY_DATA: (temporal) key data; for TKIP this consists of
- *	16 bytes encryption key followed by 8 bytes each for TX and RX MIC
- *	keys
- * @NL80211_KEY_IDX: key ID (u8, 0-3)
- * @NL80211_KEY_CIPHER: key cipher suite (u32, as defined by IEEE 802.11
- *	section 7.3.2.25.1, e.g. 0x000FAC04)
- * @NL80211_KEY_SEQ: transmit key sequence number (IV/PN) for TKIP and
- *	CCMP keys, each six bytes in little endian
- * @NL80211_KEY_DEFAULT: flag indicating default key
- * @NL80211_KEY_DEFAULT_MGMT: flag indicating default management key
- * @NL80211_KEY_TYPE: the key type from enum nl80211_key_type, if not
- *	specified the default depends on whether a MAC address was
- *	given with the command using the key or not (u32)
- * @NL80211_KEY_DEFAULT_TYPES: A nested attribute containing flags
- *	attributes, specifying what a key should be set as default as.
- *	See &enum nl80211_key_default_types.
- * @__NL80211_KEY_AFTER_LAST: internal
- * @NL80211_KEY_MAX: highest key attribute
- */
-enum nl80211_key_attributes {
-	__NL80211_KEY_INVALID,
-	NL80211_KEY_DATA,
-	NL80211_KEY_IDX,
-	NL80211_KEY_CIPHER,
-	NL80211_KEY_SEQ,
-	NL80211_KEY_DEFAULT,
-	NL80211_KEY_DEFAULT_MGMT,
-	NL80211_KEY_TYPE,
-	NL80211_KEY_DEFAULT_TYPES,
-
-	/* keep last */
-	__NL80211_KEY_AFTER_LAST,
-	NL80211_KEY_MAX = __NL80211_KEY_AFTER_LAST - 1
-};
-
-/**
- * enum nl80211_tx_rate_attributes - TX rate set attributes
- * @__NL80211_TXRATE_INVALID: invalid
- * @NL80211_TXRATE_LEGACY: Legacy (non-MCS) rates allowed for TX rate selection
- *	in an array of rates as defined in IEEE 802.11 7.3.2.2 (u8 values with
- *	1 = 500 kbps) but without the IE length restriction (at most
- *	%NL80211_MAX_SUPP_RATES in a single array).
- * @NL80211_TXRATE_MCS: HT (MCS) rates allowed for TX rate selection
- *	in an array of MCS numbers.
- * @__NL80211_TXRATE_AFTER_LAST: internal
- * @NL80211_TXRATE_MAX: highest TX rate attribute
- */
-enum nl80211_tx_rate_attributes {
-	__NL80211_TXRATE_INVALID,
-	NL80211_TXRATE_LEGACY,
-	NL80211_TXRATE_MCS,
-
-	/* keep last */
-	__NL80211_TXRATE_AFTER_LAST,
-	NL80211_TXRATE_MAX = __NL80211_TXRATE_AFTER_LAST - 1
-};
-
-/**
- * enum nl80211_band - Frequency band
- * @NL80211_BAND_2GHZ: 2.4 GHz ISM band
- * @NL80211_BAND_5GHZ: around 5 GHz band (4.9 - 5.7 GHz)
- */
-enum nl80211_band {
-	NL80211_BAND_2GHZ,
-	NL80211_BAND_5GHZ,
-};
-
-enum nl80211_ps_state {
-	NL80211_PS_DISABLED,
-	NL80211_PS_ENABLED,
-};
-
-/**
- * enum nl80211_attr_cqm - connection quality monitor attributes
- * @__NL80211_ATTR_CQM_INVALID: invalid
- * @NL80211_ATTR_CQM_RSSI_THOLD: RSSI threshold in dBm. This value specifies
- *	the threshold for the RSSI level at which an event will be sent. Zero
- *	to disable.
- * @NL80211_ATTR_CQM_RSSI_HYST: RSSI hysteresis in dBm. This value specifies
- *	the minimum amount the RSSI level must change after an event before a
- *	new event may be issued (to reduce effects of RSSI oscillation).
- * @NL80211_ATTR_CQM_RSSI_THRESHOLD_EVENT: RSSI threshold event
- * @NL80211_ATTR_CQM_PKT_LOSS_EVENT: a u32 value indicating that this many
- *	consecutive packets were not acknowledged by the peer
- * @__NL80211_ATTR_CQM_AFTER_LAST: internal
- * @NL80211_ATTR_CQM_MAX: highest key attribute
- */
-enum nl80211_attr_cqm {
-	__NL80211_ATTR_CQM_INVALID,
-	NL80211_ATTR_CQM_RSSI_THOLD,
-	NL80211_ATTR_CQM_RSSI_HYST,
-	NL80211_ATTR_CQM_RSSI_THRESHOLD_EVENT,
-	NL80211_ATTR_CQM_PKT_LOSS_EVENT,
-
-	/* keep last */
-	__NL80211_ATTR_CQM_AFTER_LAST,
-	NL80211_ATTR_CQM_MAX = __NL80211_ATTR_CQM_AFTER_LAST - 1
-};
-
-/**
- * enum nl80211_cqm_rssi_threshold_event - RSSI threshold event
- * @NL80211_CQM_RSSI_THRESHOLD_EVENT_LOW: The RSSI level is lower than the
- *      configured threshold
- * @NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH: The RSSI is higher than the
- *      configured threshold
- */
-enum nl80211_cqm_rssi_threshold_event {
-	NL80211_CQM_RSSI_THRESHOLD_EVENT_LOW,
-	NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH,
-};
-
-
-/**
- * enum nl80211_tx_power_setting - TX power adjustment
- * @NL80211_TX_POWER_AUTOMATIC: automatically determine transmit power
- * @NL80211_TX_POWER_LIMITED: limit TX power by the mBm parameter
- * @NL80211_TX_POWER_FIXED: fix TX power to the mBm parameter
- */
-enum nl80211_tx_power_setting {
-	NL80211_TX_POWER_AUTOMATIC,
-	NL80211_TX_POWER_LIMITED,
-	NL80211_TX_POWER_FIXED,
-};
-
-/**
- * enum nl80211_wowlan_packet_pattern_attr - WoWLAN packet pattern attribute
- * @__NL80211_WOWLAN_PKTPAT_INVALID: invalid number for nested attribute
- * @NL80211_WOWLAN_PKTPAT_PATTERN: the pattern, values where the mask has
- *	a zero bit are ignored
- * @NL80211_WOWLAN_PKTPAT_MASK: pattern mask, must be long enough to have
- *	a bit for each byte in the pattern. The lowest-order bit corresponds
- *	to the first byte of the pattern, but the bytes of the pattern are
- *	in a little-endian-like format, i.e. the 9th byte of the pattern
- *	corresponds to the lowest-order bit in the second byte of the mask.
- *	For example: The match 00:xx:00:00:xx:00:00:00:00:xx:xx:xx (where
- *	xx indicates "don't care") would be represented by a pattern of
- *	twelve zero bytes, and a mask of "0xed,0x07".
- *	Note that the pattern matching is done as though frames were not
- *	802.11 frames but 802.3 frames, i.e. the frame is fully unpacked
- *	first (including SNAP header unpacking) and then matched.
- * @NUM_NL80211_WOWLAN_PKTPAT: number of attributes
- * @MAX_NL80211_WOWLAN_PKTPAT: max attribute number
- */
-enum nl80211_wowlan_packet_pattern_attr {
-	__NL80211_WOWLAN_PKTPAT_INVALID,
-	NL80211_WOWLAN_PKTPAT_MASK,
-	NL80211_WOWLAN_PKTPAT_PATTERN,
-
-	NUM_NL80211_WOWLAN_PKTPAT,
-	MAX_NL80211_WOWLAN_PKTPAT = NUM_NL80211_WOWLAN_PKTPAT - 1,
-};
-
-/**
- * struct nl80211_wowlan_pattern_support - pattern support information
- * @max_patterns: maximum number of patterns supported
- * @min_pattern_len: minimum length of each pattern
- * @max_pattern_len: maximum length of each pattern
- *
- * This struct is carried in %NL80211_WOWLAN_TRIG_PKT_PATTERN when
- * that is part of %NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED in the
- * capability information given by the kernel to userspace.
- */
-struct nl80211_wowlan_pattern_support {
-	__u32 max_patterns;
-	__u32 min_pattern_len;
-	__u32 max_pattern_len;
-} __attribute__((packed));
-
-/**
- * enum nl80211_wowlan_triggers - WoWLAN trigger definitions
- * @__NL80211_WOWLAN_TRIG_INVALID: invalid number for nested attributes
- * @NL80211_WOWLAN_TRIG_ANY: wake up on any activity, do not really put
- *	the chip into a special state -- works best with chips that have
- *	support for low-power operation already (flag)
- * @NL80211_WOWLAN_TRIG_DISCONNECT: wake up on disconnect, the way disconnect
- *	is detected is implementation-specific (flag)
- * @NL80211_WOWLAN_TRIG_MAGIC_PKT: wake up on magic packet (6x 0xff, followed
- *	by 16 repetitions of MAC addr, anywhere in payload) (flag)
- * @NL80211_WOWLAN_TRIG_PKT_PATTERN: wake up on the specified packet patterns
- *	which are passed in an array of nested attributes, each nested attribute
- *	defining a with attributes from &struct nl80211_wowlan_trig_pkt_pattern.
- *	Each pattern defines a wakeup packet. The matching is done on the MSDU,
- *	i.e. as though the packet was an 802.3 packet, so the pattern matching
- *	is done after the packet is converted to the MSDU.
- *
- *	In %NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED, it is a binary attribute
- *	carrying a &struct nl80211_wowlan_pattern_support.
- * @NL80211_WOWLAN_TRIG_GTK_REKEY_SUPPORTED: Not a real trigger, and cannot be
- *	used when setting, used only to indicate that GTK rekeying is supported
- *	by the device (flag)
- * @NL80211_WOWLAN_TRIG_GTK_REKEY_FAILURE: wake up on GTK rekey failure (if
- *	done by the device) (flag)
- * @NL80211_WOWLAN_TRIG_EAP_IDENT_REQUEST: wake up on EAP Identity Request
- *	packet (flag)
- * @NL80211_WOWLAN_TRIG_4WAY_HANDSHAKE: wake up on 4-way handshake (flag)
- * @NL80211_WOWLAN_TRIG_RFKILL_RELEASE: wake up when rfkill is released
- *	(on devices that have rfkill in the device) (flag)
- * @NUM_NL80211_WOWLAN_TRIG: number of wake on wireless triggers
- * @MAX_NL80211_WOWLAN_TRIG: highest wowlan trigger attribute number
- */
-enum nl80211_wowlan_triggers {
-	__NL80211_WOWLAN_TRIG_INVALID,
-	NL80211_WOWLAN_TRIG_ANY,
-	NL80211_WOWLAN_TRIG_DISCONNECT,
-	NL80211_WOWLAN_TRIG_MAGIC_PKT,
-	NL80211_WOWLAN_TRIG_PKT_PATTERN,
-	NL80211_WOWLAN_TRIG_GTK_REKEY_SUPPORTED,
-	NL80211_WOWLAN_TRIG_GTK_REKEY_FAILURE,
-	NL80211_WOWLAN_TRIG_EAP_IDENT_REQUEST,
-	NL80211_WOWLAN_TRIG_4WAY_HANDSHAKE,
-	NL80211_WOWLAN_TRIG_RFKILL_RELEASE,
-
-	/* keep last */
-	NUM_NL80211_WOWLAN_TRIG,
-	MAX_NL80211_WOWLAN_TRIG = NUM_NL80211_WOWLAN_TRIG - 1
-};
-
-/**
- * enum nl80211_iface_limit_attrs - limit attributes
- * @NL80211_IFACE_LIMIT_UNSPEC: (reserved)
- * @NL80211_IFACE_LIMIT_MAX: maximum number of interfaces that
- *	can be chosen from this set of interface types (u32)
- * @NL80211_IFACE_LIMIT_TYPES: nested attribute containing a
- *	flag attribute for each interface type in this set
- * @NUM_NL80211_IFACE_LIMIT: number of attributes
- * @MAX_NL80211_IFACE_LIMIT: highest attribute number
- */
-enum nl80211_iface_limit_attrs {
-	NL80211_IFACE_LIMIT_UNSPEC,
-	NL80211_IFACE_LIMIT_MAX,
-	NL80211_IFACE_LIMIT_TYPES,
-
-	/* keep last */
-	NUM_NL80211_IFACE_LIMIT,
-	MAX_NL80211_IFACE_LIMIT = NUM_NL80211_IFACE_LIMIT - 1
-};
-
-/**
- * enum nl80211_if_combination_attrs -- interface combination attributes
- *
- * @NL80211_IFACE_COMB_UNSPEC: (reserved)
- * @NL80211_IFACE_COMB_LIMITS: Nested attributes containing the limits
- *	for given interface types, see &enum nl80211_iface_limit_attrs.
- * @NL80211_IFACE_COMB_MAXNUM: u32 attribute giving the total number of
- *	interfaces that can be created in this group. This number doesn't
- *	apply to interfaces purely managed in software, which are listed
- *	in a separate attribute %NL80211_ATTR_INTERFACES_SOFTWARE.
- * @NL80211_IFACE_COMB_STA_AP_BI_MATCH: flag attribute specifying that
- *	beacon intervals within this group must be all the same even for
- *	infrastructure and AP/GO combinations, i.e. the GO(s) must adopt
- *	the infrastructure network's beacon interval.
- * @NL80211_IFACE_COMB_NUM_CHANNELS: u32 attribute specifying how many
- *	different channels may be used within this group.
- * @NUM_NL80211_IFACE_COMB: number of attributes
- * @MAX_NL80211_IFACE_COMB: highest attribute number
- *
- * Examples:
- *	limits = [ #{STA} <= 1, #{AP} <= 1 ], matching BI, channels = 1, max = 2
- *	=> allows an AP and a STA that must match BIs
- *
- *	numbers = [ #{AP, P2P-GO} <= 8 ], channels = 1, max = 8
- *	=> allows 8 of AP/GO
- *
- *	numbers = [ #{STA} <= 2 ], channels = 2, max = 2
- *	=> allows two STAs on different channels
- *
- *	numbers = [ #{STA} <= 1, #{P2P-client,P2P-GO} <= 3 ], max = 4
- *	=> allows a STA plus three P2P interfaces
- *
- * The list of these four possiblities could completely be contained
- * within the %NL80211_ATTR_INTERFACE_COMBINATIONS attribute to indicate
- * that any of these groups must match.
- *
- * "Combinations" of just a single interface will not be listed here,
- * a single interface of any valid interface type is assumed to always
- * be possible by itself. This means that implicitly, for each valid
- * interface type, the following group always exists:
- *	numbers = [ #{<type>} <= 1 ], channels = 1, max = 1
- */
-enum nl80211_if_combination_attrs {
-	NL80211_IFACE_COMB_UNSPEC,
-	NL80211_IFACE_COMB_LIMITS,
-	NL80211_IFACE_COMB_MAXNUM,
-	NL80211_IFACE_COMB_STA_AP_BI_MATCH,
-	NL80211_IFACE_COMB_NUM_CHANNELS,
-
-	/* keep last */
-	NUM_NL80211_IFACE_COMB,
-	MAX_NL80211_IFACE_COMB = NUM_NL80211_IFACE_COMB - 1
-};
-
-
-/**
- * enum nl80211_plink_state - state of a mesh peer link finite state machine
- *
- * @NL80211_PLINK_LISTEN: initial state, considered the implicit
- *	state of non existant mesh peer links
- * @NL80211_PLINK_OPN_SNT: mesh plink open frame has been sent to
- *	this mesh peer
- * @NL80211_PLINK_OPN_RCVD: mesh plink open frame has been received
- *	from this mesh peer
- * @NL80211_PLINK_CNF_RCVD: mesh plink confirm frame has been
- *	received from this mesh peer
- * @NL80211_PLINK_ESTAB: mesh peer link is established
- * @NL80211_PLINK_HOLDING: mesh peer link is being closed or cancelled
- * @NL80211_PLINK_BLOCKED: all frames transmitted from this mesh
- *	plink are discarded
- * @NUM_NL80211_PLINK_STATES: number of peer link states
- * @MAX_NL80211_PLINK_STATES: highest numerical value of plink states
- */
-enum nl80211_plink_state {
-	NL80211_PLINK_LISTEN,
-	NL80211_PLINK_OPN_SNT,
-	NL80211_PLINK_OPN_RCVD,
-	NL80211_PLINK_CNF_RCVD,
-	NL80211_PLINK_ESTAB,
-	NL80211_PLINK_HOLDING,
-	NL80211_PLINK_BLOCKED,
-
-	/* keep last */
-	NUM_NL80211_PLINK_STATES,
-	MAX_NL80211_PLINK_STATES = NUM_NL80211_PLINK_STATES - 1
-};
-
-#define NL80211_KCK_LEN			16
-#define NL80211_KEK_LEN			16
-#define NL80211_REPLAY_CTR_LEN		8
-
-/**
- * enum nl80211_rekey_data - attributes for GTK rekey offload
- * @__NL80211_REKEY_DATA_INVALID: invalid number for nested attributes
- * @NL80211_REKEY_DATA_KEK: key encryption key (binary)
- * @NL80211_REKEY_DATA_KCK: key confirmation key (binary)
- * @NL80211_REKEY_DATA_REPLAY_CTR: replay counter (binary)
- * @NUM_NL80211_REKEY_DATA: number of rekey attributes (internal)
- * @MAX_NL80211_REKEY_DATA: highest rekey attribute (internal)
- */
-enum nl80211_rekey_data {
-	__NL80211_REKEY_DATA_INVALID,
-	NL80211_REKEY_DATA_KEK,
-	NL80211_REKEY_DATA_KCK,
-	NL80211_REKEY_DATA_REPLAY_CTR,
-
-	/* keep last */
-	NUM_NL80211_REKEY_DATA,
-	MAX_NL80211_REKEY_DATA = NUM_NL80211_REKEY_DATA - 1
-};
-
-/**
- * enum nl80211_hidden_ssid - values for %NL80211_ATTR_HIDDEN_SSID
- * @NL80211_HIDDEN_SSID_NOT_IN_USE: do not hide SSID (i.e., broadcast it in
- *	Beacon frames)
- * @NL80211_HIDDEN_SSID_ZERO_LEN: hide SSID by using zero-length SSID element
- *	in Beacon frames
- * @NL80211_HIDDEN_SSID_ZERO_CONTENTS: hide SSID by using correct length of SSID
- *	element in Beacon frames but zero out each byte in the SSID
- */
-enum nl80211_hidden_ssid {
-	NL80211_HIDDEN_SSID_NOT_IN_USE,
-	NL80211_HIDDEN_SSID_ZERO_LEN,
-	NL80211_HIDDEN_SSID_ZERO_CONTENTS
-};
-
-/**
- * enum nl80211_sta_wme_attr - station WME attributes
- * @__NL80211_STA_WME_INVALID: invalid number for nested attribute
- * @NL80211_STA_WME_UAPSD_QUEUES: bitmap of uapsd queues. the format
- *	is the same as the AC bitmap in the QoS info field.
- * @NL80211_STA_WME_MAX_SP: max service period. the format is the same
- *	as the MAX_SP field in the QoS info field (but already shifted down).
- * @__NL80211_STA_WME_AFTER_LAST: internal
- * @NL80211_STA_WME_MAX: highest station WME attribute
- */
-enum nl80211_sta_wme_attr {
-	__NL80211_STA_WME_INVALID,
-	NL80211_STA_WME_UAPSD_QUEUES,
-	NL80211_STA_WME_MAX_SP,
-
-	/* keep last */
-	__NL80211_STA_WME_AFTER_LAST,
-	NL80211_STA_WME_MAX = __NL80211_STA_WME_AFTER_LAST - 1
-};
-
-/**
- * enum nl80211_pmksa_candidate_attr - attributes for PMKSA caching candidates
- * @__NL80211_PMKSA_CANDIDATE_INVALID: invalid number for nested attributes
- * @NL80211_PMKSA_CANDIDATE_INDEX: candidate index (u32; the smaller, the higher
- *	priority)
- * @NL80211_PMKSA_CANDIDATE_BSSID: candidate BSSID (6 octets)
- * @NL80211_PMKSA_CANDIDATE_PREAUTH: RSN pre-authentication supported (flag)
- * @NUM_NL80211_PMKSA_CANDIDATE: number of PMKSA caching candidate attributes
- *	(internal)
- * @MAX_NL80211_PMKSA_CANDIDATE: highest PMKSA caching candidate attribute
- *	(internal)
- */
-enum nl80211_pmksa_candidate_attr {
-	__NL80211_PMKSA_CANDIDATE_INVALID,
-	NL80211_PMKSA_CANDIDATE_INDEX,
-	NL80211_PMKSA_CANDIDATE_BSSID,
-	NL80211_PMKSA_CANDIDATE_PREAUTH,
-
-	/* keep last */
-	NUM_NL80211_PMKSA_CANDIDATE,
-	MAX_NL80211_PMKSA_CANDIDATE = NUM_NL80211_PMKSA_CANDIDATE - 1
-};
-
-/**
- * enum nl80211_tdls_operation - values for %NL80211_ATTR_TDLS_OPERATION
- * @NL80211_TDLS_DISCOVERY_REQ: Send a TDLS discovery request
- * @NL80211_TDLS_SETUP: Setup TDLS link
- * @NL80211_TDLS_TEARDOWN: Teardown a TDLS link which is already established
- * @NL80211_TDLS_ENABLE_LINK: Enable TDLS link
- * @NL80211_TDLS_DISABLE_LINK: Disable TDLS link
- */
-enum nl80211_tdls_operation {
-	NL80211_TDLS_DISCOVERY_REQ,
-	NL80211_TDLS_SETUP,
-	NL80211_TDLS_TEARDOWN,
-	NL80211_TDLS_ENABLE_LINK,
-	NL80211_TDLS_DISABLE_LINK,
-};
-
-/*
- * enum nl80211_ap_sme_features - device-integrated AP features
- * Reserved for future use, no bits are defined in
- * NL80211_ATTR_DEVICE_AP_SME yet.
-enum nl80211_ap_sme_features {
-};
- */
-
-/**
- * enum nl80211_feature_flags - device/driver features
- * @NL80211_FEATURE_SK_TX_STATUS: This driver supports reflecting back
- *	TX status to the socket error queue when requested with the
- *	socket option.
- * @NL80211_FEATURE_HT_IBSS: This driver supports IBSS with HT datarates.
- * @NL80211_FEATURE_INACTIVITY_TIMER: This driver takes care of freeing up
- *	the connected inactive stations in AP mode.
- */
-enum nl80211_feature_flags {
-	NL80211_FEATURE_SK_TX_STATUS	= 1 << 0,
-	NL80211_FEATURE_HT_IBSS		= 1 << 1,
-	NL80211_FEATURE_INACTIVITY_TIMER = 1 << 2,
-};
-
-/**
- * enum nl80211_probe_resp_offload_support_attr - optional supported
- *	protocols for probe-response offloading by the driver/FW.
- *	To be used with the %NL80211_ATTR_PROBE_RESP_OFFLOAD attribute.
- *	Each enum value represents a bit in the bitmap of supported
- *	protocols. Typically a subset of probe-requests belonging to a
- *	supported protocol will be excluded from offload and uploaded
- *	to the host.
- *
- * @NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS: Support for WPS ver. 1
- * @NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS2: Support for WPS ver. 2
- * @NL80211_PROBE_RESP_OFFLOAD_SUPPORT_P2P: Support for P2P
- * @NL80211_PROBE_RESP_OFFLOAD_SUPPORT_80211U: Support for 802.11u
- */
-enum nl80211_probe_resp_offload_support_attr {
-	NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS =	1<<0,
-	NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS2 =	1<<1,
-	NL80211_PROBE_RESP_OFFLOAD_SUPPORT_P2P =	1<<2,
-	NL80211_PROBE_RESP_OFFLOAD_SUPPORT_80211U =	1<<3,
-};
-
-#endif /* __LINUX_NL80211_H */
diff --git a/ANDROID_3.4.5/include/linux/nl802154.h b/ANDROID_3.4.5/include/linux/nl802154.h
deleted file mode 100644
index 33d9f517..00000000
--- a/ANDROID_3.4.5/include/linux/nl802154.h
+++ /dev/null
@@ -1,129 +0,0 @@
-/*
- * nl802154.h
- *
- * Copyright (C) 2007, 2008, 2009 Siemens AG
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- *
- */
-
-#ifndef NL802154_H
-#define NL802154_H
-
-#define IEEE802154_NL_NAME "802.15.4 MAC"
-#define IEEE802154_MCAST_COORD_NAME "coordinator"
-#define IEEE802154_MCAST_BEACON_NAME "beacon"
-
-enum {
-	__IEEE802154_ATTR_INVALID,
-
-	IEEE802154_ATTR_DEV_NAME,
-	IEEE802154_ATTR_DEV_INDEX,
-
-	IEEE802154_ATTR_STATUS,
-
-	IEEE802154_ATTR_SHORT_ADDR,
-	IEEE802154_ATTR_HW_ADDR,
-	IEEE802154_ATTR_PAN_ID,
-
-	IEEE802154_ATTR_CHANNEL,
-
-	IEEE802154_ATTR_COORD_SHORT_ADDR,
-	IEEE802154_ATTR_COORD_HW_ADDR,
-	IEEE802154_ATTR_COORD_PAN_ID,
-
-	IEEE802154_ATTR_SRC_SHORT_ADDR,
-	IEEE802154_ATTR_SRC_HW_ADDR,
-	IEEE802154_ATTR_SRC_PAN_ID,
-
-	IEEE802154_ATTR_DEST_SHORT_ADDR,
-	IEEE802154_ATTR_DEST_HW_ADDR,
-	IEEE802154_ATTR_DEST_PAN_ID,
-
-	IEEE802154_ATTR_CAPABILITY,
-	IEEE802154_ATTR_REASON,
-	IEEE802154_ATTR_SCAN_TYPE,
-	IEEE802154_ATTR_CHANNELS,
-	IEEE802154_ATTR_DURATION,
-	IEEE802154_ATTR_ED_LIST,
-	IEEE802154_ATTR_BCN_ORD,
-	IEEE802154_ATTR_SF_ORD,
-	IEEE802154_ATTR_PAN_COORD,
-	IEEE802154_ATTR_BAT_EXT,
-	IEEE802154_ATTR_COORD_REALIGN,
-	IEEE802154_ATTR_SEC,
-
-	IEEE802154_ATTR_PAGE,
-	IEEE802154_ATTR_CHANNEL_PAGE_LIST,
-
-	IEEE802154_ATTR_PHY_NAME,
-
-	__IEEE802154_ATTR_MAX,
-};
-
-#define IEEE802154_ATTR_MAX (__IEEE802154_ATTR_MAX - 1)
-
-extern const struct nla_policy ieee802154_policy[];
-
-/* commands */
-/* REQ should be responded with CONF
- * and INDIC with RESP
- */
-enum {
-	__IEEE802154_COMMAND_INVALID,
-
-	IEEE802154_ASSOCIATE_REQ,
-	IEEE802154_ASSOCIATE_CONF,
-	IEEE802154_DISASSOCIATE_REQ,
-	IEEE802154_DISASSOCIATE_CONF,
-	IEEE802154_GET_REQ,
-	IEEE802154_GET_CONF,
-	IEEE802154_RESET_REQ,
-	IEEE802154_RESET_CONF,
-	IEEE802154_SCAN_REQ,
-	IEEE802154_SCAN_CONF,
-	IEEE802154_SET_REQ,
-	IEEE802154_SET_CONF,
-	IEEE802154_START_REQ,
-	IEEE802154_START_CONF,
-	IEEE802154_SYNC_REQ,
-	IEEE802154_POLL_REQ,
-	IEEE802154_POLL_CONF,
-
-	IEEE802154_ASSOCIATE_INDIC,
-	IEEE802154_ASSOCIATE_RESP,
-	IEEE802154_DISASSOCIATE_INDIC,
-	IEEE802154_BEACON_NOTIFY_INDIC,
-	IEEE802154_ORPHAN_INDIC,
-	IEEE802154_ORPHAN_RESP,
-	IEEE802154_COMM_STATUS_INDIC,
-	IEEE802154_SYNC_LOSS_INDIC,
-
-	IEEE802154_GTS_REQ, /* Not supported yet */
-	IEEE802154_GTS_INDIC, /* Not supported yet */
-	IEEE802154_GTS_CONF, /* Not supported yet */
-	IEEE802154_RX_ENABLE_REQ, /* Not supported yet */
-	IEEE802154_RX_ENABLE_CONF, /* Not supported yet */
-
-	IEEE802154_LIST_IFACE,
-	IEEE802154_LIST_PHY,
-	IEEE802154_ADD_IFACE,
-	IEEE802154_DEL_IFACE,
-
-	__IEEE802154_CMD_MAX,
-};
-
-#define IEEE802154_CMD_MAX (__IEEE802154_CMD_MAX - 1)
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/nls.h b/ANDROID_3.4.5/include/linux/nls.h
deleted file mode 100644
index 5dc635f8..00000000
--- a/ANDROID_3.4.5/include/linux/nls.h
+++ /dev/null
@@ -1,107 +0,0 @@
-#ifndef _LINUX_NLS_H
-#define _LINUX_NLS_H
-
-#include <linux/init.h>
-
-/* Unicode has changed over the years.  Unicode code points no longer
- * fit into 16 bits; as of Unicode 5 valid code points range from 0
- * to 0x10ffff (17 planes, where each plane holds 65536 code points).
- *
- * The original decision to represent Unicode characters as 16-bit
- * wchar_t values is now outdated.  But plane 0 still includes the
- * most commonly used characters, so we will retain it.  The newer
- * 32-bit unicode_t type can be used when it is necessary to
- * represent the full Unicode character set.
- */
-
-/* Plane-0 Unicode character */
-typedef u16 wchar_t;
-#define MAX_WCHAR_T	0xffff
-
-/* Arbitrary Unicode character */
-typedef u32 unicode_t;
-
-struct nls_table {
-	const char *charset;
-	const char *alias;
-	int (*uni2char) (wchar_t uni, unsigned char *out, int boundlen);
-	int (*char2uni) (const unsigned char *rawstring, int boundlen,
-			 wchar_t *uni);
-	const unsigned char *charset2lower;
-	const unsigned char *charset2upper;
-	struct module *owner;
-	struct nls_table *next;
-};
-
-/* this value hold the maximum octet of charset */
-#define NLS_MAX_CHARSET_SIZE 6 /* for UTF-8 */
-
-/* Byte order for UTF-16 strings */
-enum utf16_endian {
-	UTF16_HOST_ENDIAN,
-	UTF16_LITTLE_ENDIAN,
-	UTF16_BIG_ENDIAN
-};
-
-/* nls_base.c */
-extern int register_nls(struct nls_table *);
-extern int unregister_nls(struct nls_table *);
-extern struct nls_table *load_nls(char *);
-extern void unload_nls(struct nls_table *);
-extern struct nls_table *load_nls_default(void);
-
-extern int utf8_to_utf32(const u8 *s, int len, unicode_t *pu);
-extern int utf32_to_utf8(unicode_t u, u8 *s, int maxlen);
-extern int utf8s_to_utf16s(const u8 *s, int len,
-		enum utf16_endian endian, wchar_t *pwcs, int maxlen);
-extern int utf16s_to_utf8s(const wchar_t *pwcs, int len,
-		enum utf16_endian endian, u8 *s, int maxlen);
-
-static inline unsigned char nls_tolower(struct nls_table *t, unsigned char c)
-{
-	unsigned char nc = t->charset2lower[c];
-
-	return nc ? nc : c;
-}
-
-static inline unsigned char nls_toupper(struct nls_table *t, unsigned char c)
-{
-	unsigned char nc = t->charset2upper[c];
-
-	return nc ? nc : c;
-}
-
-static inline int nls_strnicmp(struct nls_table *t, const unsigned char *s1,
-		const unsigned char *s2, int len)
-{
-	while (len--) {
-		if (nls_tolower(t, *s1++) != nls_tolower(t, *s2++))
-			return 1;
-	}
-
-	return 0;
-}
-
-/*
- * nls_nullsize - return length of null character for codepage
- * @codepage - codepage for which to return length of NULL terminator
- *
- * Since we can't guarantee that the null terminator will be a particular
- * length, we have to check against the codepage. If there's a problem
- * determining it, assume a single-byte NULL terminator.
- */
-static inline int
-nls_nullsize(const struct nls_table *codepage)
-{
-	int charlen;
-	char tmp[NLS_MAX_CHARSET_SIZE];
-
-	charlen = codepage->uni2char(0, tmp, NLS_MAX_CHARSET_SIZE);
-
-	return charlen > 0 ? charlen : 1;
-}
-
-#define MODULE_ALIAS_NLS(name)	MODULE_ALIAS("nls_" __stringify(name))
-
-#endif /* _LINUX_NLS_H */
-
diff --git a/ANDROID_3.4.5/include/linux/nmi.h b/ANDROID_3.4.5/include/linux/nmi.h
deleted file mode 100644
index db50840e..00000000
--- a/ANDROID_3.4.5/include/linux/nmi.h
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- *  linux/include/linux/nmi.h
- */
-#ifndef LINUX_NMI_H
-#define LINUX_NMI_H
-
-#include <linux/sched.h>
-#include <asm/irq.h>
-
-/**
- * touch_nmi_watchdog - restart NMI watchdog timeout.
- * 
- * If the architecture supports the NMI watchdog, touch_nmi_watchdog()
- * may be used to reset the timeout - for code which intentionally
- * disables interrupts for a long time. This call is stateless.
- */
-#if defined(CONFIG_HAVE_NMI_WATCHDOG) || defined(CONFIG_HARDLOCKUP_DETECTOR)
-#include <asm/nmi.h>
-extern void touch_nmi_watchdog(void);
-#else
-static inline void touch_nmi_watchdog(void)
-{
-	touch_softlockup_watchdog();
-}
-#endif
-
-/*
- * Create trigger_all_cpu_backtrace() out of the arch-provided
- * base function. Return whether such support was available,
- * to allow calling code to fall back to some other mechanism:
- */
-#ifdef arch_trigger_all_cpu_backtrace
-static inline bool trigger_all_cpu_backtrace(void)
-{
-	arch_trigger_all_cpu_backtrace();
-
-	return true;
-}
-#else
-static inline bool trigger_all_cpu_backtrace(void)
-{
-	return false;
-}
-#endif
-
-#ifdef CONFIG_LOCKUP_DETECTOR
-int hw_nmi_is_cpu_stuck(struct pt_regs *);
-u64 hw_nmi_get_sample_period(int watchdog_thresh);
-extern int watchdog_enabled;
-extern int watchdog_thresh;
-struct ctl_table;
-extern int proc_dowatchdog(struct ctl_table *, int ,
-			   void __user *, size_t *, loff_t *);
-#endif
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/node.h b/ANDROID_3.4.5/include/linux/node.h
deleted file mode 100644
index 624e53ce..00000000
--- a/ANDROID_3.4.5/include/linux/node.h
+++ /dev/null
@@ -1,85 +0,0 @@
-/*
- * include/linux/node.h - generic node definition
- *
- * This is mainly for topological representation. We define the 
- * basic 'struct node' here, which can be embedded in per-arch 
- * definitions of processors.
- *
- * Basic handling of the devices is done in drivers/base/node.c
- * and system devices are handled in drivers/base/sys.c. 
- *
- * Nodes are exported via driverfs in the class/node/devices/
- * directory. 
- */
-#ifndef _LINUX_NODE_H_
-#define _LINUX_NODE_H_
-
-#include <linux/device.h>
-#include <linux/cpumask.h>
-#include <linux/workqueue.h>
-
-struct node {
-	struct device	dev;
-
-#if defined(CONFIG_MEMORY_HOTPLUG_SPARSE) && defined(CONFIG_HUGETLBFS)
-	struct work_struct	node_work;
-#endif
-};
-
-struct memory_block;
-extern struct node node_devices[];
-typedef  void (*node_registration_func_t)(struct node *);
-
-extern int register_node(struct node *, int, struct node *);
-extern void unregister_node(struct node *node);
-#ifdef CONFIG_NUMA
-extern int register_one_node(int nid);
-extern void unregister_one_node(int nid);
-extern int register_cpu_under_node(unsigned int cpu, unsigned int nid);
-extern int unregister_cpu_under_node(unsigned int cpu, unsigned int nid);
-extern int register_mem_sect_under_node(struct memory_block *mem_blk,
-						int nid);
-extern int unregister_mem_sect_under_nodes(struct memory_block *mem_blk,
-					   unsigned long phys_index);
-
-#ifdef CONFIG_HUGETLBFS
-extern void register_hugetlbfs_with_node(node_registration_func_t doregister,
-					 node_registration_func_t unregister);
-#endif
-#else
-static inline int register_one_node(int nid)
-{
-	return 0;
-}
-static inline int unregister_one_node(int nid)
-{
-	return 0;
-}
-static inline int register_cpu_under_node(unsigned int cpu, unsigned int nid)
-{
-	return 0;
-}
-static inline int unregister_cpu_under_node(unsigned int cpu, unsigned int nid)
-{
-	return 0;
-}
-static inline int register_mem_sect_under_node(struct memory_block *mem_blk,
-							int nid)
-{
-	return 0;
-}
-static inline int unregister_mem_sect_under_nodes(struct memory_block *mem_blk,
-						  unsigned long phys_index)
-{
-	return 0;
-}
-
-static inline void register_hugetlbfs_with_node(node_registration_func_t reg,
-						node_registration_func_t unreg)
-{
-}
-#endif
-
-#define to_node(device) container_of(device, struct node, dev)
-
-#endif /* _LINUX_NODE_H_ */
diff --git a/ANDROID_3.4.5/include/linux/nodemask.h b/ANDROID_3.4.5/include/linux/nodemask.h
deleted file mode 100644
index 7afc3633..00000000
--- a/ANDROID_3.4.5/include/linux/nodemask.h
+++ /dev/null
@@ -1,515 +0,0 @@
-#ifndef __LINUX_NODEMASK_H
-#define __LINUX_NODEMASK_H
-
-/*
- * Nodemasks provide a bitmap suitable for representing the
- * set of Node's in a system, one bit position per Node number.
- *
- * See detailed comments in the file linux/bitmap.h describing the
- * data type on which these nodemasks are based.
- *
- * For details of nodemask_scnprintf() and nodemask_parse_user(),
- * see bitmap_scnprintf() and bitmap_parse_user() in lib/bitmap.c.
- * For details of nodelist_scnprintf() and nodelist_parse(), see
- * bitmap_scnlistprintf() and bitmap_parselist(), also in bitmap.c.
- * For details of node_remap(), see bitmap_bitremap in lib/bitmap.c.
- * For details of nodes_remap(), see bitmap_remap in lib/bitmap.c.
- * For details of nodes_onto(), see bitmap_onto in lib/bitmap.c.
- * For details of nodes_fold(), see bitmap_fold in lib/bitmap.c.
- *
- * The available nodemask operations are:
- *
- * void node_set(node, mask)		turn on bit 'node' in mask
- * void node_clear(node, mask)		turn off bit 'node' in mask
- * void nodes_setall(mask)		set all bits
- * void nodes_clear(mask)		clear all bits
- * int node_isset(node, mask)		true iff bit 'node' set in mask
- * int node_test_and_set(node, mask)	test and set bit 'node' in mask
- *
- * void nodes_and(dst, src1, src2)	dst = src1 & src2  [intersection]
- * void nodes_or(dst, src1, src2)	dst = src1 | src2  [union]
- * void nodes_xor(dst, src1, src2)	dst = src1 ^ src2
- * void nodes_andnot(dst, src1, src2)	dst = src1 & ~src2
- * void nodes_complement(dst, src)	dst = ~src
- *
- * int nodes_equal(mask1, mask2)	Does mask1 == mask2?
- * int nodes_intersects(mask1, mask2)	Do mask1 and mask2 intersect?
- * int nodes_subset(mask1, mask2)	Is mask1 a subset of mask2?
- * int nodes_empty(mask)		Is mask empty (no bits sets)?
- * int nodes_full(mask)			Is mask full (all bits sets)?
- * int nodes_weight(mask)		Hamming weight - number of set bits
- *
- * void nodes_shift_right(dst, src, n)	Shift right
- * void nodes_shift_left(dst, src, n)	Shift left
- *
- * int first_node(mask)			Number lowest set bit, or MAX_NUMNODES
- * int next_node(node, mask)		Next node past 'node', or MAX_NUMNODES
- * int first_unset_node(mask)		First node not set in mask, or 
- *					MAX_NUMNODES.
- *
- * nodemask_t nodemask_of_node(node)	Return nodemask with bit 'node' set
- * NODE_MASK_ALL			Initializer - all bits set
- * NODE_MASK_NONE			Initializer - no bits set
- * unsigned long *nodes_addr(mask)	Array of unsigned long's in mask
- *
- * int nodemask_scnprintf(buf, len, mask) Format nodemask for printing
- * int nodemask_parse_user(ubuf, ulen, mask)	Parse ascii string as nodemask
- * int nodelist_scnprintf(buf, len, mask) Format nodemask as list for printing
- * int nodelist_parse(buf, map)		Parse ascii string as nodelist
- * int node_remap(oldbit, old, new)	newbit = map(old, new)(oldbit)
- * void nodes_remap(dst, src, old, new)	*dst = map(old, new)(src)
- * void nodes_onto(dst, orig, relmap)	*dst = orig relative to relmap
- * void nodes_fold(dst, orig, sz)	dst bits = orig bits mod sz
- *
- * for_each_node_mask(node, mask)	for-loop node over mask
- *
- * int num_online_nodes()		Number of online Nodes
- * int num_possible_nodes()		Number of all possible Nodes
- *
- * int node_random(mask)		Random node with set bit in mask
- *
- * int node_online(node)		Is some node online?
- * int node_possible(node)		Is some node possible?
- *
- * node_set_online(node)		set bit 'node' in node_online_map
- * node_set_offline(node)		clear bit 'node' in node_online_map
- *
- * for_each_node(node)			for-loop node over node_possible_map
- * for_each_online_node(node)		for-loop node over node_online_map
- *
- * Subtlety:
- * 1) The 'type-checked' form of node_isset() causes gcc (3.3.2, anyway)
- *    to generate slightly worse code.  So use a simple one-line #define
- *    for node_isset(), instead of wrapping an inline inside a macro, the
- *    way we do the other calls.
- *
- * NODEMASK_SCRATCH
- * When doing above logical AND, OR, XOR, Remap operations the callers tend to
- * need temporary nodemask_t's on the stack. But if NODES_SHIFT is large,
- * nodemask_t's consume too much stack space.  NODEMASK_SCRATCH is a helper
- * for such situations. See below and CPUMASK_ALLOC also.
- */
-
-#include <linux/kernel.h>
-#include <linux/threads.h>
-#include <linux/bitmap.h>
-#include <linux/numa.h>
-
-typedef struct { DECLARE_BITMAP(bits, MAX_NUMNODES); } nodemask_t;
-extern nodemask_t _unused_nodemask_arg_;
-
-#define node_set(node, dst) __node_set((node), &(dst))
-static inline void __node_set(int node, volatile nodemask_t *dstp)
-{
-	set_bit(node, dstp->bits);
-}
-
-#define node_clear(node, dst) __node_clear((node), &(dst))
-static inline void __node_clear(int node, volatile nodemask_t *dstp)
-{
-	clear_bit(node, dstp->bits);
-}
-
-#define nodes_setall(dst) __nodes_setall(&(dst), MAX_NUMNODES)
-static inline void __nodes_setall(nodemask_t *dstp, int nbits)
-{
-	bitmap_fill(dstp->bits, nbits);
-}
-
-#define nodes_clear(dst) __nodes_clear(&(dst), MAX_NUMNODES)
-static inline void __nodes_clear(nodemask_t *dstp, int nbits)
-{
-	bitmap_zero(dstp->bits, nbits);
-}
-
-/* No static inline type checking - see Subtlety (1) above. */
-#define node_isset(node, nodemask) test_bit((node), (nodemask).bits)
-
-#define node_test_and_set(node, nodemask) \
-			__node_test_and_set((node), &(nodemask))
-static inline int __node_test_and_set(int node, nodemask_t *addr)
-{
-	return test_and_set_bit(node, addr->bits);
-}
-
-#define nodes_and(dst, src1, src2) \
-			__nodes_and(&(dst), &(src1), &(src2), MAX_NUMNODES)
-static inline void __nodes_and(nodemask_t *dstp, const nodemask_t *src1p,
-					const nodemask_t *src2p, int nbits)
-{
-	bitmap_and(dstp->bits, src1p->bits, src2p->bits, nbits);
-}
-
-#define nodes_or(dst, src1, src2) \
-			__nodes_or(&(dst), &(src1), &(src2), MAX_NUMNODES)
-static inline void __nodes_or(nodemask_t *dstp, const nodemask_t *src1p,
-					const nodemask_t *src2p, int nbits)
-{
-	bitmap_or(dstp->bits, src1p->bits, src2p->bits, nbits);
-}
-
-#define nodes_xor(dst, src1, src2) \
-			__nodes_xor(&(dst), &(src1), &(src2), MAX_NUMNODES)
-static inline void __nodes_xor(nodemask_t *dstp, const nodemask_t *src1p,
-					const nodemask_t *src2p, int nbits)
-{
-	bitmap_xor(dstp->bits, src1p->bits, src2p->bits, nbits);
-}
-
-#define nodes_andnot(dst, src1, src2) \
-			__nodes_andnot(&(dst), &(src1), &(src2), MAX_NUMNODES)
-static inline void __nodes_andnot(nodemask_t *dstp, const nodemask_t *src1p,
-					const nodemask_t *src2p, int nbits)
-{
-	bitmap_andnot(dstp->bits, src1p->bits, src2p->bits, nbits);
-}
-
-#define nodes_complement(dst, src) \
-			__nodes_complement(&(dst), &(src), MAX_NUMNODES)
-static inline void __nodes_complement(nodemask_t *dstp,
-					const nodemask_t *srcp, int nbits)
-{
-	bitmap_complement(dstp->bits, srcp->bits, nbits);
-}
-
-#define nodes_equal(src1, src2) \
-			__nodes_equal(&(src1), &(src2), MAX_NUMNODES)
-static inline int __nodes_equal(const nodemask_t *src1p,
-					const nodemask_t *src2p, int nbits)
-{
-	return bitmap_equal(src1p->bits, src2p->bits, nbits);
-}
-
-#define nodes_intersects(src1, src2) \
-			__nodes_intersects(&(src1), &(src2), MAX_NUMNODES)
-static inline int __nodes_intersects(const nodemask_t *src1p,
-					const nodemask_t *src2p, int nbits)
-{
-	return bitmap_intersects(src1p->bits, src2p->bits, nbits);
-}
-
-#define nodes_subset(src1, src2) \
-			__nodes_subset(&(src1), &(src2), MAX_NUMNODES)
-static inline int __nodes_subset(const nodemask_t *src1p,
-					const nodemask_t *src2p, int nbits)
-{
-	return bitmap_subset(src1p->bits, src2p->bits, nbits);
-}
-
-#define nodes_empty(src) __nodes_empty(&(src), MAX_NUMNODES)
-static inline int __nodes_empty(const nodemask_t *srcp, int nbits)
-{
-	return bitmap_empty(srcp->bits, nbits);
-}
-
-#define nodes_full(nodemask) __nodes_full(&(nodemask), MAX_NUMNODES)
-static inline int __nodes_full(const nodemask_t *srcp, int nbits)
-{
-	return bitmap_full(srcp->bits, nbits);
-}
-
-#define nodes_weight(nodemask) __nodes_weight(&(nodemask), MAX_NUMNODES)
-static inline int __nodes_weight(const nodemask_t *srcp, int nbits)
-{
-	return bitmap_weight(srcp->bits, nbits);
-}
-
-#define nodes_shift_right(dst, src, n) \
-			__nodes_shift_right(&(dst), &(src), (n), MAX_NUMNODES)
-static inline void __nodes_shift_right(nodemask_t *dstp,
-					const nodemask_t *srcp, int n, int nbits)
-{
-	bitmap_shift_right(dstp->bits, srcp->bits, n, nbits);
-}
-
-#define nodes_shift_left(dst, src, n) \
-			__nodes_shift_left(&(dst), &(src), (n), MAX_NUMNODES)
-static inline void __nodes_shift_left(nodemask_t *dstp,
-					const nodemask_t *srcp, int n, int nbits)
-{
-	bitmap_shift_left(dstp->bits, srcp->bits, n, nbits);
-}
-
-/* FIXME: better would be to fix all architectures to never return
-          > MAX_NUMNODES, then the silly min_ts could be dropped. */
-
-#define first_node(src) __first_node(&(src))
-static inline int __first_node(const nodemask_t *srcp)
-{
-	return min_t(int, MAX_NUMNODES, find_first_bit(srcp->bits, MAX_NUMNODES));
-}
-
-#define next_node(n, src) __next_node((n), &(src))
-static inline int __next_node(int n, const nodemask_t *srcp)
-{
-	return min_t(int,MAX_NUMNODES,find_next_bit(srcp->bits, MAX_NUMNODES, n+1));
-}
-
-static inline void init_nodemask_of_node(nodemask_t *mask, int node)
-{
-	nodes_clear(*mask);
-	node_set(node, *mask);
-}
-
-#define nodemask_of_node(node)						\
-({									\
-	typeof(_unused_nodemask_arg_) m;				\
-	if (sizeof(m) == sizeof(unsigned long)) {			\
-		m.bits[0] = 1UL << (node);				\
-	} else {							\
-		init_nodemask_of_node(&m, (node));			\
-	}								\
-	m;								\
-})
-
-#define first_unset_node(mask) __first_unset_node(&(mask))
-static inline int __first_unset_node(const nodemask_t *maskp)
-{
-	return min_t(int,MAX_NUMNODES,
-			find_first_zero_bit(maskp->bits, MAX_NUMNODES));
-}
-
-#define NODE_MASK_LAST_WORD BITMAP_LAST_WORD_MASK(MAX_NUMNODES)
-
-#if MAX_NUMNODES <= BITS_PER_LONG
-
-#define NODE_MASK_ALL							\
-((nodemask_t) { {							\
-	[BITS_TO_LONGS(MAX_NUMNODES)-1] = NODE_MASK_LAST_WORD		\
-} })
-
-#else
-
-#define NODE_MASK_ALL							\
-((nodemask_t) { {							\
-	[0 ... BITS_TO_LONGS(MAX_NUMNODES)-2] = ~0UL,			\
-	[BITS_TO_LONGS(MAX_NUMNODES)-1] = NODE_MASK_LAST_WORD		\
-} })
-
-#endif
-
-#define NODE_MASK_NONE							\
-((nodemask_t) { {							\
-	[0 ... BITS_TO_LONGS(MAX_NUMNODES)-1] =  0UL			\
-} })
-
-#define nodes_addr(src) ((src).bits)
-
-#define nodemask_scnprintf(buf, len, src) \
-			__nodemask_scnprintf((buf), (len), &(src), MAX_NUMNODES)
-static inline int __nodemask_scnprintf(char *buf, int len,
-					const nodemask_t *srcp, int nbits)
-{
-	return bitmap_scnprintf(buf, len, srcp->bits, nbits);
-}
-
-#define nodemask_parse_user(ubuf, ulen, dst) \
-		__nodemask_parse_user((ubuf), (ulen), &(dst), MAX_NUMNODES)
-static inline int __nodemask_parse_user(const char __user *buf, int len,
-					nodemask_t *dstp, int nbits)
-{
-	return bitmap_parse_user(buf, len, dstp->bits, nbits);
-}
-
-#define nodelist_scnprintf(buf, len, src) \
-			__nodelist_scnprintf((buf), (len), &(src), MAX_NUMNODES)
-static inline int __nodelist_scnprintf(char *buf, int len,
-					const nodemask_t *srcp, int nbits)
-{
-	return bitmap_scnlistprintf(buf, len, srcp->bits, nbits);
-}
-
-#define nodelist_parse(buf, dst) __nodelist_parse((buf), &(dst), MAX_NUMNODES)
-static inline int __nodelist_parse(const char *buf, nodemask_t *dstp, int nbits)
-{
-	return bitmap_parselist(buf, dstp->bits, nbits);
-}
-
-#define node_remap(oldbit, old, new) \
-		__node_remap((oldbit), &(old), &(new), MAX_NUMNODES)
-static inline int __node_remap(int oldbit,
-		const nodemask_t *oldp, const nodemask_t *newp, int nbits)
-{
-	return bitmap_bitremap(oldbit, oldp->bits, newp->bits, nbits);
-}
-
-#define nodes_remap(dst, src, old, new) \
-		__nodes_remap(&(dst), &(src), &(old), &(new), MAX_NUMNODES)
-static inline void __nodes_remap(nodemask_t *dstp, const nodemask_t *srcp,
-		const nodemask_t *oldp, const nodemask_t *newp, int nbits)
-{
-	bitmap_remap(dstp->bits, srcp->bits, oldp->bits, newp->bits, nbits);
-}
-
-#define nodes_onto(dst, orig, relmap) \
-		__nodes_onto(&(dst), &(orig), &(relmap), MAX_NUMNODES)
-static inline void __nodes_onto(nodemask_t *dstp, const nodemask_t *origp,
-		const nodemask_t *relmapp, int nbits)
-{
-	bitmap_onto(dstp->bits, origp->bits, relmapp->bits, nbits);
-}
-
-#define nodes_fold(dst, orig, sz) \
-		__nodes_fold(&(dst), &(orig), sz, MAX_NUMNODES)
-static inline void __nodes_fold(nodemask_t *dstp, const nodemask_t *origp,
-		int sz, int nbits)
-{
-	bitmap_fold(dstp->bits, origp->bits, sz, nbits);
-}
-
-#if MAX_NUMNODES > 1
-#define for_each_node_mask(node, mask)			\
-	for ((node) = first_node(mask);			\
-		(node) < MAX_NUMNODES;			\
-		(node) = next_node((node), (mask)))
-#else /* MAX_NUMNODES == 1 */
-#define for_each_node_mask(node, mask)			\
-	if (!nodes_empty(mask))				\
-		for ((node) = 0; (node) < 1; (node)++)
-#endif /* MAX_NUMNODES */
-
-/*
- * Bitmasks that are kept for all the nodes.
- */
-enum node_states {
-	N_POSSIBLE,		/* The node could become online at some point */
-	N_ONLINE,		/* The node is online */
-	N_NORMAL_MEMORY,	/* The node has regular memory */
-#ifdef CONFIG_HIGHMEM
-	N_HIGH_MEMORY,		/* The node has regular or high memory */
-#else
-	N_HIGH_MEMORY = N_NORMAL_MEMORY,
-#endif
-	N_CPU,		/* The node has one or more cpus */
-	NR_NODE_STATES
-};
-
-/*
- * The following particular system nodemasks and operations
- * on them manage all possible and online nodes.
- */
-
-extern nodemask_t node_states[NR_NODE_STATES];
-
-#if MAX_NUMNODES > 1
-static inline int node_state(int node, enum node_states state)
-{
-	return node_isset(node, node_states[state]);
-}
-
-static inline void node_set_state(int node, enum node_states state)
-{
-	__node_set(node, &node_states[state]);
-}
-
-static inline void node_clear_state(int node, enum node_states state)
-{
-	__node_clear(node, &node_states[state]);
-}
-
-static inline int num_node_state(enum node_states state)
-{
-	return nodes_weight(node_states[state]);
-}
-
-#define for_each_node_state(__node, __state) \
-	for_each_node_mask((__node), node_states[__state])
-
-#define first_online_node	first_node(node_states[N_ONLINE])
-#define next_online_node(nid)	next_node((nid), node_states[N_ONLINE])
-
-extern int nr_node_ids;
-extern int nr_online_nodes;
-
-static inline void node_set_online(int nid)
-{
-	node_set_state(nid, N_ONLINE);
-	nr_online_nodes = num_node_state(N_ONLINE);
-}
-
-static inline void node_set_offline(int nid)
-{
-	node_clear_state(nid, N_ONLINE);
-	nr_online_nodes = num_node_state(N_ONLINE);
-}
-
-#else
-
-static inline int node_state(int node, enum node_states state)
-{
-	return node == 0;
-}
-
-static inline void node_set_state(int node, enum node_states state)
-{
-}
-
-static inline void node_clear_state(int node, enum node_states state)
-{
-}
-
-static inline int num_node_state(enum node_states state)
-{
-	return 1;
-}
-
-#define for_each_node_state(node, __state) \
-	for ( (node) = 0; (node) == 0; (node) = 1)
-
-#define first_online_node	0
-#define next_online_node(nid)	(MAX_NUMNODES)
-#define nr_node_ids		1
-#define nr_online_nodes		1
-
-#define node_set_online(node)	   node_set_state((node), N_ONLINE)
-#define node_set_offline(node)	   node_clear_state((node), N_ONLINE)
-
-#endif
-
-#if defined(CONFIG_NUMA) && (MAX_NUMNODES > 1)
-extern int node_random(const nodemask_t *maskp);
-#else
-static inline int node_random(const nodemask_t *mask)
-{
-	return 0;
-}
-#endif
-
-#define node_online_map 	node_states[N_ONLINE]
-#define node_possible_map 	node_states[N_POSSIBLE]
-
-#define num_online_nodes()	num_node_state(N_ONLINE)
-#define num_possible_nodes()	num_node_state(N_POSSIBLE)
-#define node_online(node)	node_state((node), N_ONLINE)
-#define node_possible(node)	node_state((node), N_POSSIBLE)
-
-#define for_each_node(node)	   for_each_node_state(node, N_POSSIBLE)
-#define for_each_online_node(node) for_each_node_state(node, N_ONLINE)
-
-/*
- * For nodemask scrach area.
- * NODEMASK_ALLOC(type, name) allocates an object with a specified type and
- * name.
- */
-#if NODES_SHIFT > 8 /* nodemask_t > 256 bytes */
-#define NODEMASK_ALLOC(type, name, gfp_flags)	\
-			type *name = kmalloc(sizeof(*name), gfp_flags)
-#define NODEMASK_FREE(m)			kfree(m)
-#else
-#define NODEMASK_ALLOC(type, name, gfp_flags)	type _##name, *name = &_##name
-#define NODEMASK_FREE(m)			do {} while (0)
-#endif
-
-/* A example struture for using NODEMASK_ALLOC, used in mempolicy. */
-struct nodemask_scratch {
-	nodemask_t	mask1;
-	nodemask_t	mask2;
-};
-
-#define NODEMASK_SCRATCH(x)						\
-			NODEMASK_ALLOC(struct nodemask_scratch, x,	\
-					GFP_KERNEL | __GFP_NORETRY)
-#define NODEMASK_SCRATCH_FREE(x)	NODEMASK_FREE(x)
-
-
-#endif /* __LINUX_NODEMASK_H */
diff --git a/ANDROID_3.4.5/include/linux/notifier.h b/ANDROID_3.4.5/include/linux/notifier.h
deleted file mode 100644
index d65746ef..00000000
--- a/ANDROID_3.4.5/include/linux/notifier.h
+++ /dev/null
@@ -1,212 +0,0 @@
-/*
- *	Routines to manage notifier chains for passing status changes to any
- *	interested routines. We need this instead of hard coded call lists so
- *	that modules can poke their nose into the innards. The network devices
- *	needed them so here they are for the rest of you.
- *
- *				Alan Cox <Alan.Cox@linux.org>
- */
- 
-#ifndef _LINUX_NOTIFIER_H
-#define _LINUX_NOTIFIER_H
-#include <linux/errno.h>
-#include <linux/mutex.h>
-#include <linux/rwsem.h>
-#include <linux/srcu.h>
-
-/*
- * Notifier chains are of four types:
- *
- *	Atomic notifier chains: Chain callbacks run in interrupt/atomic
- *		context. Callouts are not allowed to block.
- *	Blocking notifier chains: Chain callbacks run in process context.
- *		Callouts are allowed to block.
- *	Raw notifier chains: There are no restrictions on callbacks,
- *		registration, or unregistration.  All locking and protection
- *		must be provided by the caller.
- *	SRCU notifier chains: A variant of blocking notifier chains, with
- *		the same restrictions.
- *
- * atomic_notifier_chain_register() may be called from an atomic context,
- * but blocking_notifier_chain_register() and srcu_notifier_chain_register()
- * must be called from a process context.  Ditto for the corresponding
- * _unregister() routines.
- *
- * atomic_notifier_chain_unregister(), blocking_notifier_chain_unregister(),
- * and srcu_notifier_chain_unregister() _must not_ be called from within
- * the call chain.
- *
- * SRCU notifier chains are an alternative form of blocking notifier chains.
- * They use SRCU (Sleepable Read-Copy Update) instead of rw-semaphores for
- * protection of the chain links.  This means there is _very_ low overhead
- * in srcu_notifier_call_chain(): no cache bounces and no memory barriers.
- * As compensation, srcu_notifier_chain_unregister() is rather expensive.
- * SRCU notifier chains should be used when the chain will be called very
- * often but notifier_blocks will seldom be removed.  Also, SRCU notifier
- * chains are slightly more difficult to use because they require special
- * runtime initialization.
- */
-
-struct notifier_block {
-	int (*notifier_call)(struct notifier_block *, unsigned long, void *);
-	struct notifier_block __rcu *next;
-	int priority;
-};
-
-struct atomic_notifier_head {
-	spinlock_t lock;
-	struct notifier_block __rcu *head;
-};
-
-struct blocking_notifier_head {
-	struct rw_semaphore rwsem;
-	struct notifier_block __rcu *head;
-};
-
-struct raw_notifier_head {
-	struct notifier_block __rcu *head;
-};
-
-struct srcu_notifier_head {
-	struct mutex mutex;
-	struct srcu_struct srcu;
-	struct notifier_block __rcu *head;
-};
-
-#define ATOMIC_INIT_NOTIFIER_HEAD(name) do {	\
-		spin_lock_init(&(name)->lock);	\
-		(name)->head = NULL;		\
-	} while (0)
-#define BLOCKING_INIT_NOTIFIER_HEAD(name) do {	\
-		init_rwsem(&(name)->rwsem);	\
-		(name)->head = NULL;		\
-	} while (0)
-#define RAW_INIT_NOTIFIER_HEAD(name) do {	\
-		(name)->head = NULL;		\
-	} while (0)
-
-/* srcu_notifier_heads must be initialized and cleaned up dynamically */
-extern void srcu_init_notifier_head(struct srcu_notifier_head *nh);
-#define srcu_cleanup_notifier_head(name)	\
-		cleanup_srcu_struct(&(name)->srcu);
-
-#define ATOMIC_NOTIFIER_INIT(name) {				\
-		.lock = __SPIN_LOCK_UNLOCKED(name.lock),	\
-		.head = NULL }
-#define BLOCKING_NOTIFIER_INIT(name) {				\
-		.rwsem = __RWSEM_INITIALIZER((name).rwsem),	\
-		.head = NULL }
-#define RAW_NOTIFIER_INIT(name)	{				\
-		.head = NULL }
-/* srcu_notifier_heads cannot be initialized statically */
-
-#define ATOMIC_NOTIFIER_HEAD(name)				\
-	struct atomic_notifier_head name =			\
-		ATOMIC_NOTIFIER_INIT(name)
-#define BLOCKING_NOTIFIER_HEAD(name)				\
-	struct blocking_notifier_head name =			\
-		BLOCKING_NOTIFIER_INIT(name)
-#define RAW_NOTIFIER_HEAD(name)					\
-	struct raw_notifier_head name =				\
-		RAW_NOTIFIER_INIT(name)
-
-#ifdef __KERNEL__
-
-extern int atomic_notifier_chain_register(struct atomic_notifier_head *nh,
-		struct notifier_block *nb);
-extern int blocking_notifier_chain_register(struct blocking_notifier_head *nh,
-		struct notifier_block *nb);
-extern int raw_notifier_chain_register(struct raw_notifier_head *nh,
-		struct notifier_block *nb);
-extern int srcu_notifier_chain_register(struct srcu_notifier_head *nh,
-		struct notifier_block *nb);
-
-extern int blocking_notifier_chain_cond_register(
-		struct blocking_notifier_head *nh,
-		struct notifier_block *nb);
-
-extern int atomic_notifier_chain_unregister(struct atomic_notifier_head *nh,
-		struct notifier_block *nb);
-extern int blocking_notifier_chain_unregister(struct blocking_notifier_head *nh,
-		struct notifier_block *nb);
-extern int raw_notifier_chain_unregister(struct raw_notifier_head *nh,
-		struct notifier_block *nb);
-extern int srcu_notifier_chain_unregister(struct srcu_notifier_head *nh,
-		struct notifier_block *nb);
-
-extern int atomic_notifier_call_chain(struct atomic_notifier_head *nh,
-		unsigned long val, void *v);
-extern int __atomic_notifier_call_chain(struct atomic_notifier_head *nh,
-	unsigned long val, void *v, int nr_to_call, int *nr_calls);
-extern int blocking_notifier_call_chain(struct blocking_notifier_head *nh,
-		unsigned long val, void *v);
-extern int __blocking_notifier_call_chain(struct blocking_notifier_head *nh,
-	unsigned long val, void *v, int nr_to_call, int *nr_calls);
-extern int raw_notifier_call_chain(struct raw_notifier_head *nh,
-		unsigned long val, void *v);
-extern int __raw_notifier_call_chain(struct raw_notifier_head *nh,
-	unsigned long val, void *v, int nr_to_call, int *nr_calls);
-extern int srcu_notifier_call_chain(struct srcu_notifier_head *nh,
-		unsigned long val, void *v);
-extern int __srcu_notifier_call_chain(struct srcu_notifier_head *nh,
-	unsigned long val, void *v, int nr_to_call, int *nr_calls);
-
-#define NOTIFY_DONE		0x0000		/* Don't care */
-#define NOTIFY_OK		0x0001		/* Suits me */
-#define NOTIFY_STOP_MASK	0x8000		/* Don't call further */
-#define NOTIFY_BAD		(NOTIFY_STOP_MASK|0x0002)
-						/* Bad/Veto action */
-/*
- * Clean way to return from the notifier and stop further calls.
- */
-#define NOTIFY_STOP		(NOTIFY_OK|NOTIFY_STOP_MASK)
-
-/* Encapsulate (negative) errno value (in particular, NOTIFY_BAD <=> EPERM). */
-static inline int notifier_from_errno(int err)
-{
-	if (err)
-		return NOTIFY_STOP_MASK | (NOTIFY_OK - err);
-
-	return NOTIFY_OK;
-}
-
-/* Restore (negative) errno value from notify return value. */
-static inline int notifier_to_errno(int ret)
-{
-	ret &= ~NOTIFY_STOP_MASK;
-	return ret > NOTIFY_OK ? NOTIFY_OK - ret : 0;
-}
-
-/*
- *	Declared notifiers so far. I can imagine quite a few more chains
- *	over time (eg laptop power reset chains, reboot chain (to clean 
- *	device units up), device [un]mount chain, module load/unload chain,
- *	low memory chain, screenblank chain (for plug in modular screenblankers) 
- *	VC switch chains (for loadable kernel svgalib VC switch helpers) etc...
- */
- 
-/* CPU notfiers are defined in include/linux/cpu.h. */
-
-/* netdevice notifiers are defined in include/linux/netdevice.h */
-
-/* reboot notifiers are defined in include/linux/reboot.h. */
-
-/* Hibernation and suspend events are defined in include/linux/suspend.h. */
-
-/* Virtual Terminal events are defined in include/linux/vt.h. */
-
-#define NETLINK_URELEASE	0x0001	/* Unicast netlink socket released */
-
-/* Console keyboard events.
- * Note: KBD_KEYCODE is always sent before KBD_UNBOUND_KEYCODE, KBD_UNICODE and
- * KBD_KEYSYM. */
-#define KBD_KEYCODE		0x0001 /* Keyboard keycode, called before any other */
-#define KBD_UNBOUND_KEYCODE	0x0002 /* Keyboard keycode which is not bound to any other */
-#define KBD_UNICODE		0x0003 /* Keyboard unicode */
-#define KBD_KEYSYM		0x0004 /* Keyboard keysym */
-#define KBD_POST_KEYSYM		0x0005 /* Called after keyboard keysym interpretation */
-
-extern struct blocking_notifier_head reboot_notifier_list;
-
-#endif /* __KERNEL__ */
-#endif /* _LINUX_NOTIFIER_H */
diff --git a/ANDROID_3.4.5/include/linux/nsc_gpio.h b/ANDROID_3.4.5/include/linux/nsc_gpio.h
deleted file mode 100644
index 7da0cf37..00000000
--- a/ANDROID_3.4.5/include/linux/nsc_gpio.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/**
-   nsc_gpio.c
-
-   National Semiconductor GPIO common access methods.
-
-   struct nsc_gpio_ops abstracts the low-level access
-   operations for the GPIO units on 2 NSC chip families; the GEODE
-   integrated CPU, and the PC-8736[03456] integrated PC-peripheral
-   chips.
-
-   The GPIO units on these chips have the same pin architecture, but
-   the access methods differ.  Thus, scx200_gpio and pc8736x_gpio
-   implement their own versions of these routines; and use the common
-   file-operations routines implemented in nsc_gpio module.
-
-   Copyright (c) 2005 Jim Cromie <jim.cromie@gmail.com>
-
-   NB: this work was tested on the Geode SC-1100 and PC-87366 chips.
-   NSC sold the GEODE line to AMD, and the PC-8736x line to Winbond.
-*/
-
-struct nsc_gpio_ops {
-	struct module*	owner;
-	u32	(*gpio_config)	(unsigned iminor, u32 mask, u32 bits);
-	void	(*gpio_dump)	(struct nsc_gpio_ops *amp, unsigned iminor);
-	int	(*gpio_get)	(unsigned iminor);
-	void	(*gpio_set)	(unsigned iminor, int state);
-	void	(*gpio_change)	(unsigned iminor);
-	int	(*gpio_current)	(unsigned iminor);
-	struct device*	dev;	/* for dev_dbg() support, set in init  */
-};
-
-extern ssize_t nsc_gpio_write(struct file *file, const char __user *data,
-			      size_t len, loff_t *ppos);
-
-extern ssize_t nsc_gpio_read(struct file *file, char __user *buf,
-			     size_t len, loff_t *ppos);
-
-extern void nsc_gpio_dump(struct nsc_gpio_ops *amp, unsigned index);
-
diff --git a/ANDROID_3.4.5/include/linux/nsproxy.h b/ANDROID_3.4.5/include/linux/nsproxy.h
deleted file mode 100644
index cc37a55a..00000000
--- a/ANDROID_3.4.5/include/linux/nsproxy.h
+++ /dev/null
@@ -1,85 +0,0 @@
-#ifndef _LINUX_NSPROXY_H
-#define _LINUX_NSPROXY_H
-
-#include <linux/spinlock.h>
-#include <linux/sched.h>
-
-struct mnt_namespace;
-struct uts_namespace;
-struct ipc_namespace;
-struct pid_namespace;
-struct fs_struct;
-
-/*
- * A structure to contain pointers to all per-process
- * namespaces - fs (mount), uts, network, sysvipc, etc.
- *
- * 'count' is the number of tasks holding a reference.
- * The count for each namespace, then, will be the number
- * of nsproxies pointing to it, not the number of tasks.
- *
- * The nsproxy is shared by tasks which share all namespaces.
- * As soon as a single namespace is cloned or unshared, the
- * nsproxy is copied.
- */
-struct nsproxy {
-	atomic_t count;
-	struct uts_namespace *uts_ns;
-	struct ipc_namespace *ipc_ns;
-	struct mnt_namespace *mnt_ns;
-	struct pid_namespace *pid_ns;
-	struct net 	     *net_ns;
-};
-extern struct nsproxy init_nsproxy;
-
-/*
- * the namespaces access rules are:
- *
- *  1. only current task is allowed to change tsk->nsproxy pointer or
- *     any pointer on the nsproxy itself
- *
- *  2. when accessing (i.e. reading) current task's namespaces - no
- *     precautions should be taken - just dereference the pointers
- *
- *  3. the access to other task namespaces is performed like this
- *     rcu_read_lock();
- *     nsproxy = task_nsproxy(tsk);
- *     if (nsproxy != NULL) {
- *             / *
- *               * work with the namespaces here
- *               * e.g. get the reference on one of them
- *               * /
- *     } / *
- *         * NULL task_nsproxy() means that this task is
- *         * almost dead (zombie)
- *         * /
- *     rcu_read_unlock();
- *
- */
-
-static inline struct nsproxy *task_nsproxy(struct task_struct *tsk)
-{
-	return rcu_dereference(tsk->nsproxy);
-}
-
-int copy_namespaces(unsigned long flags, struct task_struct *tsk);
-void exit_task_namespaces(struct task_struct *tsk);
-void switch_task_namespaces(struct task_struct *tsk, struct nsproxy *new);
-void free_nsproxy(struct nsproxy *ns);
-int unshare_nsproxy_namespaces(unsigned long, struct nsproxy **,
-	struct fs_struct *);
-int __init nsproxy_cache_init(void);
-
-static inline void put_nsproxy(struct nsproxy *ns)
-{
-	if (atomic_dec_and_test(&ns->count)) {
-		free_nsproxy(ns);
-	}
-}
-
-static inline void get_nsproxy(struct nsproxy *ns)
-{
-	atomic_inc(&ns->count);
-}
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/nubus.h b/ANDROID_3.4.5/include/linux/nubus.h
deleted file mode 100644
index e137b3c4..00000000
--- a/ANDROID_3.4.5/include/linux/nubus.h
+++ /dev/null
@@ -1,363 +0,0 @@
-/*
-  nubus.h: various definitions and prototypes for NuBus drivers to use.
-
-  Originally written by Alan Cox.
-
-  Hacked to death by C. Scott Ananian and David Huggins-Daines.
-  
-  Some of the constants in here are from the corresponding
-  NetBSD/OpenBSD header file, by Allen Briggs.  We figured out the
-  rest of them on our own. */
-
-#ifndef LINUX_NUBUS_H
-#define LINUX_NUBUS_H
-
-#include <linux/types.h>
-#ifdef __KERNEL__
-#include <asm/nubus.h>
-#endif
-
-enum nubus_category {
-	NUBUS_CAT_BOARD          = 0x0001,
-	NUBUS_CAT_DISPLAY        = 0x0003,
-	NUBUS_CAT_NETWORK        = 0x0004,
-	NUBUS_CAT_COMMUNICATIONS = 0x0006,
-	NUBUS_CAT_FONT           = 0x0009,
-	NUBUS_CAT_CPU            = 0x000A,
-	/* For lack of a better name */
-	NUBUS_CAT_DUODOCK        = 0x0020
-};
-
-enum nubus_type_network {
-	NUBUS_TYPE_ETHERNET      = 0x0001,
-	NUBUS_TYPE_RS232         = 0x0002
-};
-
-enum nubus_type_display {
-	NUBUS_TYPE_VIDEO         = 0x0001
-};
-
-enum nubus_type_cpu {
-	NUBUS_TYPE_68020         = 0x0003,
-	NUBUS_TYPE_68030         = 0x0004,
-	NUBUS_TYPE_68040         = 0x0005
-};
-
-/* Known <Cat,Type,SW,HW> tuples: (according to TattleTech and Slots)
- *  68030 motherboards: <10,4,0,24>
- *  68040 motherboards: <10,5,0,24>
- *  DuoDock Plus: <32,1,1,2>
- *
- *  Toby Frame Buffer card: <3,1,1,1>
- *  RBV built-in video (IIci): <3,1,1,24>
- *  Valkyrie built-in video (Q630): <3,1,1,46>
- *  Macintosh Display Card: <3,1,1,25>
- *  Sonora built-in video (P460): <3,1,1,34>
- *  Jet framebuffer (DuoDock Plus): <3,1,1,41>
- *
- *  SONIC comm-slot/on-board and DuoDock Ethernet: <4,1,1,272>
- *  SONIC LC-PDS Ethernet (Dayna, but like Apple 16-bit, sort of): <4,1,1,271>
- *  Apple SONIC LC-PDS Ethernet ("Apple Ethernet LC Twisted-Pair Card"): <4,1,0,281>
- *  Sonic Systems Ethernet A-Series Card: <4,1,268,256>
- *  Asante MacCon NuBus-A: <4,1,260,256> (alpha-1.0,1.1 revision)
- *   ROM on the above card: <2,1,0,0>
- *  Cabletron ethernet card: <4,1,1,265>
- *  Farallon ethernet card: <4,1,268,256> (identical to Sonic Systems card)
- *  Kinetics EtherPort IIN: <4,1,259,262>
- *  API Engineering EtherRun_LCa PDS enet card: <4,1,282,256>
- *
- *  Add your devices to the list!  You can obtain the "Slots" utility
- *  from Apple's FTP site at:
- *  ftp://dev.apple.com/devworld/Tool_Chest/Devices_-_Hardware/NuBus_Slot_Manager/
- *
- *  Alternately, TattleTech can be found at any Info-Mac mirror site.  
- *  or from its distribution site: ftp://ftp.decismkr.com/dms
- */
-
-/* DrSW: Uniquely identifies the software interface to a board.  This
-   is usually the one you want to look at when writing a driver.  It's
-   not as useful as you think, though, because as we should know by
-   now (duh), "Apple Compatible" can mean a lot of things... */
-
-/* Add known DrSW values here */
-enum nubus_drsw {
-	/* NUBUS_CAT_DISPLAY */
-	NUBUS_DRSW_APPLE        = 0x0001,
-	NUBUS_DRSW_APPLE_HIRES  = 0x0013, /* MacII HiRes card driver */
-	
-	/* NUBUS_CAT_NETWORK */
-	NUBUS_DRSW_3COM         = 0x0000,
-	NUBUS_DRSW_CABLETRON    = 0x0001,
-	NUBUS_DRSW_SONIC_LC     = 0x0001,
-	NUBUS_DRSW_KINETICS     = 0x0103,
-	NUBUS_DRSW_ASANTE       = 0x0104,
-	NUBUS_DRSW_TECHWORKS    = 0x0109,
-	NUBUS_DRSW_DAYNA        = 0x010b,
-	NUBUS_DRSW_FARALLON     = 0x010c,
-	NUBUS_DRSW_APPLE_SN     = 0x010f,
-	NUBUS_DRSW_DAYNA2       = 0x0115,
-	NUBUS_DRSW_FOCUS        = 0x011a,
-	NUBUS_DRSW_ASANTE_CS    = 0x011d, /* use asante SMC9194 driver */
-	NUBUS_DRSW_DAYNA_LC     = 0x011e,
-
-	/* NUBUS_CAT_CPU */
-	NUBUS_DRSW_NONE         = 0x0000,
-};
-
-/* DrHW: Uniquely identifies the hardware interface to a board (or at
-   least, it should...  some video cards are known to incorrectly
-   identify themselves as Toby cards) */
-
-/* Add known DrHW values here */
-enum nubus_drhw {
-	/* NUBUS_CAT_DISPLAY */
-	NUBUS_DRHW_APPLE_TFB      = 0x0001, /* Toby frame buffer card */
-	NUBUS_DRHW_APPLE_WVC      = 0x0006, /* Apple Workstation Video Card */
-	NUBUS_DRHW_SIGMA_CLRMAX   = 0x0007, /* Sigma Design ColorMax */
-	NUBUS_DRHW_APPLE_SE30     = 0x0009, /* Apple SE/30 video */
-	NUBUS_DRHW_APPLE_HRVC     = 0x0013, /* Mac II High-Res Video Card */
-	NUBUS_DRHW_APPLE_PVC      = 0x0017, /* Mac II Portrait Video Card */
-	NUBUS_DRHW_APPLE_RBV1     = 0x0018, /* IIci RBV video */
-	NUBUS_DRHW_APPLE_MDC      = 0x0019, /* Macintosh Display Card */
-	NUBUS_DRHW_APPLE_SONORA   = 0x0022, /* Sonora built-in video */
-	NUBUS_DRHW_APPLE_24AC     = 0x002b, /* Mac 24AC Video Card */
-	NUBUS_DRHW_APPLE_VALKYRIE = 0x002e,
-	NUBUS_DRHW_APPLE_JET      = 0x0029, /* Jet framebuffer (DuoDock) */
-	NUBUS_DRHW_SMAC_GFX       = 0x0105, /* SuperMac GFX */
-	NUBUS_DRHW_RASTER_CB264   = 0x013B, /* RasterOps ColorBoard 264 */
-	NUBUS_DRHW_MICRON_XCEED   = 0x0146, /* Micron Exceed color */
-	NUBUS_DRHW_RDIUS_GSC      = 0x0153, /* Radius GS/C */
-	NUBUS_DRHW_SMAC_SPEC8     = 0x017B, /* SuperMac Spectrum/8 */
-	NUBUS_DRHW_SMAC_SPEC24    = 0x017C, /* SuperMac Spectrum/24 */
-	NUBUS_DRHW_RASTER_CB364   = 0x026F, /* RasterOps ColorBoard 364 */
-	NUBUS_DRHW_RDIUS_DCGX     = 0x027C, /* Radius DirectColor/GX */
-	NUBUS_DRHW_RDIUS_PC8      = 0x0291, /* Radius PrecisionColor 8 */
-	NUBUS_DRHW_LAPIS_PCS8     = 0x0292, /* Lapis ProColorServer 8 */
-	NUBUS_DRHW_RASTER_24XLI   = 0x02A0, /* RasterOps 8/24 XLi */
-	NUBUS_DRHW_RASTER_PBPGT   = 0x02A5, /* RasterOps PaintBoard Prism GT */
-	NUBUS_DRHW_EMACH_FSX      = 0x02AE, /* E-Machines Futura SX */
-	NUBUS_DRHW_RASTER_24XLTV  = 0x02B7, /* RasterOps 24XLTV */
-	NUBUS_DRHW_SMAC_THUND24   = 0x02CB, /* SuperMac Thunder/24 */
-	NUBUS_DRHW_SMAC_THUNDLGHT = 0x03D9, /* SuperMac ThunderLight */
-	NUBUS_DRHW_RDIUS_PC24XP   = 0x0406, /* Radius PrecisionColor 24Xp */
-	NUBUS_DRHW_RDIUS_PC24X    = 0x040A, /* Radius PrecisionColor 24X */
-	NUBUS_DRHW_RDIUS_PC8XJ    = 0x040B, /* Radius PrecisionColor 8XJ */
-	
-	/* NUBUS_CAT_NETWORK */
-	NUBUS_DRHW_INTERLAN       = 0x0100,
-	NUBUS_DRHW_SMC9194        = 0x0101,
-	NUBUS_DRHW_KINETICS       = 0x0106,
-	NUBUS_DRHW_CABLETRON      = 0x0109,
-	NUBUS_DRHW_ASANTE_LC      = 0x010f,
-	NUBUS_DRHW_SONIC          = 0x0110,
-	NUBUS_DRHW_TECHWORKS      = 0x0112,
-	NUBUS_DRHW_APPLE_SONIC_NB = 0x0118,
-	NUBUS_DRHW_APPLE_SONIC_LC = 0x0119,
-	NUBUS_DRHW_FOCUS          = 0x011c,
-	NUBUS_DRHW_SONNET         = 0x011d,
-};
-
-/* Resource IDs: These are the identifiers for the various weird and
-   wonderful tidbits of information that may or may not reside in the
-   NuBus ROM directory. */
-enum nubus_res_id {
-	NUBUS_RESID_TYPE         = 0x0001,
-	NUBUS_RESID_NAME         = 0x0002,
-	NUBUS_RESID_ICON         = 0x0003,
-	NUBUS_RESID_DRVRDIR      = 0x0004,
-	NUBUS_RESID_LOADREC      = 0x0005,
-	NUBUS_RESID_BOOTREC      = 0x0006,
-	NUBUS_RESID_FLAGS        = 0x0007,
-	NUBUS_RESID_HWDEVID      = 0x0008,
-	NUBUS_RESID_MINOR_BASEOS = 0x000a,
-	NUBUS_RESID_MINOR_LENGTH = 0x000b,
-	NUBUS_RESID_MAJOR_BASEOS = 0x000c,
-	NUBUS_RESID_MAJOR_LENGTH = 0x000d,
-	NUBUS_RESID_CICN         = 0x000f,
-	NUBUS_RESID_ICL8         = 0x0010,
-	NUBUS_RESID_ICL4         = 0x0011,
-};
-
-/* Category-specific resources. */
-enum nubus_board_res_id {
-	NUBUS_RESID_BOARDID      = 0x0020,
-	NUBUS_RESID_PRAMINITDATA = 0x0021,
-	NUBUS_RESID_PRIMARYINIT  = 0x0022,
-	NUBUS_RESID_TIMEOUTCONST = 0x0023,
-	NUBUS_RESID_VENDORINFO   = 0x0024,
-	NUBUS_RESID_BOARDFLAGS   = 0x0025,
-	NUBUS_RESID_SECONDINIT   = 0x0026,
-
-	/* Not sure why Apple put these next two in here */
-	NUBUS_RESID_VIDNAMES     = 0x0041,
-	NUBUS_RESID_VIDMODES     = 0x007e
-};
-
-/* Fields within the vendor info directory */
-enum nubus_vendor_res_id {
-	NUBUS_RESID_VEND_ID     = 0x0001,
-	NUBUS_RESID_VEND_SERIAL = 0x0002,
-	NUBUS_RESID_VEND_REV    = 0x0003,
-	NUBUS_RESID_VEND_PART   = 0x0004,
-	NUBUS_RESID_VEND_DATE   = 0x0005
-};
-
-enum nubus_net_res_id {
-	NUBUS_RESID_MAC_ADDRESS  = 0x0080
-};
-
-enum nubus_cpu_res_id {
-	NUBUS_RESID_MEMINFO      = 0x0081,
-	NUBUS_RESID_ROMINFO      = 0x0082
-};
-
-enum nubus_display_res_id {
-	NUBUS_RESID_GAMMADIR    = 0x0040,
-	NUBUS_RESID_FIRSTMODE   = 0x0080,
-	NUBUS_RESID_SECONDMODE  = 0x0081,
-	NUBUS_RESID_THIRDMODE   = 0x0082,
-	NUBUS_RESID_FOURTHMODE  = 0x0083,
-	NUBUS_RESID_FIFTHMODE   = 0x0084,
-	NUBUS_RESID_SIXTHMODE   = 0x0085
-};
-
-struct nubus_dir
-{
-	unsigned char *base;
-	unsigned char *ptr;
-	int done;
-	int mask;
-};
-
-struct nubus_dirent
-{
-	unsigned char *base;
-	unsigned char type;
-	__u32 data;	/* Actually 24bits used */
-	int mask;
-};
-
-#ifdef __KERNEL__
-struct nubus_board {
-	struct nubus_board* next;
-	struct nubus_dev* first_dev;
-	
-	/* Only 9-E actually exist, though 0-8 are also theoretically
-	   possible, and 0 is a special case which represents the
-	   motherboard and onboard peripherals (Ethernet, video) */
-	int slot;
-	/* For slot 0, this is bogus. */
-	char name[64];
-
-	/* Format block */
-	unsigned char* fblock;
-	/* Root directory (does *not* always equal fblock + doffset!) */
-	unsigned char* directory;
-	
-	unsigned long slot_addr;
-	/* Offset to root directory (sometimes) */
-	unsigned long doffset;
-	/* Length over which to compute the crc */
-	unsigned long rom_length;
-	/* Completely useless most of the time */
-	unsigned long crc;
-	unsigned char rev;
-	unsigned char format;
-	unsigned char lanes;
-};
-
-struct nubus_dev {
-	/* Next link in device list */
-	struct nubus_dev* next;
-	/* Directory entry in /proc/bus/nubus */
-	struct proc_dir_entry* procdir;
-
-	/* The functional resource ID of this device */
-	unsigned char resid;
-	/* These are mostly here for convenience; we could always read
-	   them from the ROMs if we wanted to */
-	unsigned short category;
-	unsigned short type;
-	unsigned short dr_sw;
-	unsigned short dr_hw;
-	/* This is the device's name rather than the board's.
-	   Sometimes they are different.  Usually the board name is
-	   more correct. */
-	char name[64];
-	/* MacOS driver (I kid you not) */
-	unsigned char* driver;
-	/* Actually this is an offset */
-	unsigned long iobase;
-	unsigned long iosize;
-	unsigned char flags, hwdevid;
-	
-	/* Functional directory */
-	unsigned char* directory;
-	/* Much of our info comes from here */
-	struct nubus_board* board;
-};
-
-/* This is all NuBus devices (used to find devices later on) */
-extern struct nubus_dev* nubus_devices;
-/* This is all NuBus cards */
-extern struct nubus_board* nubus_boards;
-
-/* Generic NuBus interface functions, modelled after the PCI interface */
-void nubus_scan_bus(void);
-extern void nubus_proc_init(void);
-int get_nubus_list(char *buf);
-int nubus_proc_attach_device(struct nubus_dev *dev);
-int nubus_proc_detach_device(struct nubus_dev *dev);
-/* If we need more precision we can add some more of these */
-struct nubus_dev* nubus_find_device(unsigned short category,
-				    unsigned short type,
-				    unsigned short dr_hw,
-				    unsigned short dr_sw,
-				    const struct nubus_dev* from);
-struct nubus_dev* nubus_find_type(unsigned short category,
-				  unsigned short type,
-				  const struct nubus_dev* from);
-/* Might have more than one device in a slot, you know... */
-struct nubus_dev* nubus_find_slot(unsigned int slot,
-				  const struct nubus_dev* from);
-
-/* These are somewhat more NuBus-specific.  They all return 0 for
-   success and -1 for failure, as you'd expect. */
-
-/* The root directory which contains the board and functional
-   directories */
-int nubus_get_root_dir(const struct nubus_board* board,
-		       struct nubus_dir* dir);
-/* The board directory */
-int nubus_get_board_dir(const struct nubus_board* board,
-			struct nubus_dir* dir);
-/* The functional directory */
-int nubus_get_func_dir(const struct nubus_dev* dev,
-		       struct nubus_dir* dir);
-
-/* These work on any directory gotten via the above */
-int nubus_readdir(struct nubus_dir* dir,
-		  struct nubus_dirent* ent);
-int nubus_find_rsrc(struct nubus_dir* dir,
-		    unsigned char rsrc_type,
-		    struct nubus_dirent* ent);
-int nubus_rewinddir(struct nubus_dir* dir);
-
-/* Things to do with directory entries */
-int nubus_get_subdir(const struct nubus_dirent* ent,
-		     struct nubus_dir* dir);
-void nubus_get_rsrc_mem(void* dest,
-			const struct nubus_dirent *dirent,
-			int len);
-void nubus_get_rsrc_str(void* dest,
-			const struct nubus_dirent *dirent,
-			int maxlen);
-#endif /* __KERNEL__ */
-
-/* We'd like to get rid of this eventually.  Only daynaport.c uses it now. */
-static inline void *nubus_slot_addr(int slot)
-{
-	return (void *)(0xF0000000|(slot<<24));
-}
-
-#endif /* LINUX_NUBUS_H */
diff --git a/ANDROID_3.4.5/include/linux/numa.h b/ANDROID_3.4.5/include/linux/numa.h
deleted file mode 100644
index 3aaa3160..00000000
--- a/ANDROID_3.4.5/include/linux/numa.h
+++ /dev/null
@@ -1,15 +0,0 @@
-#ifndef _LINUX_NUMA_H
-#define _LINUX_NUMA_H
-
-
-#ifdef CONFIG_NODES_SHIFT
-#define NODES_SHIFT     CONFIG_NODES_SHIFT
-#else
-#define NODES_SHIFT     0
-#endif
-
-#define MAX_NUMNODES    (1 << NODES_SHIFT)
-
-#define	NUMA_NO_NODE	(-1)
-
-#endif /* _LINUX_NUMA_H */
diff --git a/ANDROID_3.4.5/include/linux/nvme.h b/ANDROID_3.4.5/include/linux/nvme.h
deleted file mode 100644
index 9490a005..00000000
--- a/ANDROID_3.4.5/include/linux/nvme.h
+++ /dev/null
@@ -1,434 +0,0 @@
-/*
- * Definitions for the NVM Express interface
- * Copyright (c) 2011, Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc., 
- * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#ifndef _LINUX_NVME_H
-#define _LINUX_NVME_H
-
-#include <linux/types.h>
-
-struct nvme_bar {
-	__u64			cap;	/* Controller Capabilities */
-	__u32			vs;	/* Version */
-	__u32			intms;	/* Interrupt Mask Set */
-	__u32			intmc;	/* Interrupt Mask Clear */
-	__u32			cc;	/* Controller Configuration */
-	__u32			rsvd1;	/* Reserved */
-	__u32			csts;	/* Controller Status */
-	__u32			rsvd2;	/* Reserved */
-	__u32			aqa;	/* Admin Queue Attributes */
-	__u64			asq;	/* Admin SQ Base Address */
-	__u64			acq;	/* Admin CQ Base Address */
-};
-
-#define NVME_CAP_TIMEOUT(cap)	(((cap) >> 24) & 0xff)
-#define NVME_CAP_STRIDE(cap)	(((cap) >> 32) & 0xf)
-
-enum {
-	NVME_CC_ENABLE		= 1 << 0,
-	NVME_CC_CSS_NVM		= 0 << 4,
-	NVME_CC_MPS_SHIFT	= 7,
-	NVME_CC_ARB_RR		= 0 << 11,
-	NVME_CC_ARB_WRRU	= 1 << 11,
-	NVME_CC_ARB_VS		= 7 << 11,
-	NVME_CC_SHN_NONE	= 0 << 14,
-	NVME_CC_SHN_NORMAL	= 1 << 14,
-	NVME_CC_SHN_ABRUPT	= 2 << 14,
-	NVME_CC_IOSQES		= 6 << 16,
-	NVME_CC_IOCQES		= 4 << 20,
-	NVME_CSTS_RDY		= 1 << 0,
-	NVME_CSTS_CFS		= 1 << 1,
-	NVME_CSTS_SHST_NORMAL	= 0 << 2,
-	NVME_CSTS_SHST_OCCUR	= 1 << 2,
-	NVME_CSTS_SHST_CMPLT	= 2 << 2,
-};
-
-struct nvme_id_power_state {
-	__le16			max_power;	/* centiwatts */
-	__u16			rsvd2;
-	__le32			entry_lat;	/* microseconds */
-	__le32			exit_lat;	/* microseconds */
-	__u8			read_tput;
-	__u8			read_lat;
-	__u8			write_tput;
-	__u8			write_lat;
-	__u8			rsvd16[16];
-};
-
-#define NVME_VS(major, minor)	(major << 16 | minor)
-
-struct nvme_id_ctrl {
-	__le16			vid;
-	__le16			ssvid;
-	char			sn[20];
-	char			mn[40];
-	char			fr[8];
-	__u8			rab;
-	__u8			ieee[3];
-	__u8			mic;
-	__u8			mdts;
-	__u8			rsvd78[178];
-	__le16			oacs;
-	__u8			acl;
-	__u8			aerl;
-	__u8			frmw;
-	__u8			lpa;
-	__u8			elpe;
-	__u8			npss;
-	__u8			rsvd264[248];
-	__u8			sqes;
-	__u8			cqes;
-	__u8			rsvd514[2];
-	__le32			nn;
-	__le16			oncs;
-	__le16			fuses;
-	__u8			fna;
-	__u8			vwc;
-	__le16			awun;
-	__le16			awupf;
-	__u8			rsvd530[1518];
-	struct nvme_id_power_state	psd[32];
-	__u8			vs[1024];
-};
-
-struct nvme_lbaf {
-	__le16			ms;
-	__u8			ds;
-	__u8			rp;
-};
-
-struct nvme_id_ns {
-	__le64			nsze;
-	__le64			ncap;
-	__le64			nuse;
-	__u8			nsfeat;
-	__u8			nlbaf;
-	__u8			flbas;
-	__u8			mc;
-	__u8			dpc;
-	__u8			dps;
-	__u8			rsvd30[98];
-	struct nvme_lbaf	lbaf[16];
-	__u8			rsvd192[192];
-	__u8			vs[3712];
-};
-
-enum {
-	NVME_NS_FEAT_THIN	= 1 << 0,
-	NVME_LBAF_RP_BEST	= 0,
-	NVME_LBAF_RP_BETTER	= 1,
-	NVME_LBAF_RP_GOOD	= 2,
-	NVME_LBAF_RP_DEGRADED	= 3,
-};
-
-struct nvme_lba_range_type {
-	__u8			type;
-	__u8			attributes;
-	__u8			rsvd2[14];
-	__u64			slba;
-	__u64			nlb;
-	__u8			guid[16];
-	__u8			rsvd48[16];
-};
-
-enum {
-	NVME_LBART_TYPE_FS	= 0x01,
-	NVME_LBART_TYPE_RAID	= 0x02,
-	NVME_LBART_TYPE_CACHE	= 0x03,
-	NVME_LBART_TYPE_SWAP	= 0x04,
-
-	NVME_LBART_ATTRIB_TEMP	= 1 << 0,
-	NVME_LBART_ATTRIB_HIDE	= 1 << 1,
-};
-
-/* I/O commands */
-
-enum nvme_opcode {
-	nvme_cmd_flush		= 0x00,
-	nvme_cmd_write		= 0x01,
-	nvme_cmd_read		= 0x02,
-	nvme_cmd_write_uncor	= 0x04,
-	nvme_cmd_compare	= 0x05,
-	nvme_cmd_dsm		= 0x09,
-};
-
-struct nvme_common_command {
-	__u8			opcode;
-	__u8			flags;
-	__u16			command_id;
-	__le32			nsid;
-	__u32			cdw2[2];
-	__le64			metadata;
-	__le64			prp1;
-	__le64			prp2;
-	__u32			cdw10[6];
-};
-
-struct nvme_rw_command {
-	__u8			opcode;
-	__u8			flags;
-	__u16			command_id;
-	__le32			nsid;
-	__u64			rsvd2;
-	__le64			metadata;
-	__le64			prp1;
-	__le64			prp2;
-	__le64			slba;
-	__le16			length;
-	__le16			control;
-	__le32			dsmgmt;
-	__le32			reftag;
-	__le16			apptag;
-	__le16			appmask;
-};
-
-enum {
-	NVME_RW_LR			= 1 << 15,
-	NVME_RW_FUA			= 1 << 14,
-	NVME_RW_DSM_FREQ_UNSPEC		= 0,
-	NVME_RW_DSM_FREQ_TYPICAL	= 1,
-	NVME_RW_DSM_FREQ_RARE		= 2,
-	NVME_RW_DSM_FREQ_READS		= 3,
-	NVME_RW_DSM_FREQ_WRITES		= 4,
-	NVME_RW_DSM_FREQ_RW		= 5,
-	NVME_RW_DSM_FREQ_ONCE		= 6,
-	NVME_RW_DSM_FREQ_PREFETCH	= 7,
-	NVME_RW_DSM_FREQ_TEMP		= 8,
-	NVME_RW_DSM_LATENCY_NONE	= 0 << 4,
-	NVME_RW_DSM_LATENCY_IDLE	= 1 << 4,
-	NVME_RW_DSM_LATENCY_NORM	= 2 << 4,
-	NVME_RW_DSM_LATENCY_LOW		= 3 << 4,
-	NVME_RW_DSM_SEQ_REQ		= 1 << 6,
-	NVME_RW_DSM_COMPRESSED		= 1 << 7,
-};
-
-/* Admin commands */
-
-enum nvme_admin_opcode {
-	nvme_admin_delete_sq		= 0x00,
-	nvme_admin_create_sq		= 0x01,
-	nvme_admin_get_log_page		= 0x02,
-	nvme_admin_delete_cq		= 0x04,
-	nvme_admin_create_cq		= 0x05,
-	nvme_admin_identify		= 0x06,
-	nvme_admin_abort_cmd		= 0x08,
-	nvme_admin_set_features		= 0x09,
-	nvme_admin_get_features		= 0x0a,
-	nvme_admin_async_event		= 0x0c,
-	nvme_admin_activate_fw		= 0x10,
-	nvme_admin_download_fw		= 0x11,
-	nvme_admin_format_nvm		= 0x80,
-	nvme_admin_security_send	= 0x81,
-	nvme_admin_security_recv	= 0x82,
-};
-
-enum {
-	NVME_QUEUE_PHYS_CONTIG	= (1 << 0),
-	NVME_CQ_IRQ_ENABLED	= (1 << 1),
-	NVME_SQ_PRIO_URGENT	= (0 << 1),
-	NVME_SQ_PRIO_HIGH	= (1 << 1),
-	NVME_SQ_PRIO_MEDIUM	= (2 << 1),
-	NVME_SQ_PRIO_LOW	= (3 << 1),
-	NVME_FEAT_ARBITRATION	= 0x01,
-	NVME_FEAT_POWER_MGMT	= 0x02,
-	NVME_FEAT_LBA_RANGE	= 0x03,
-	NVME_FEAT_TEMP_THRESH	= 0x04,
-	NVME_FEAT_ERR_RECOVERY	= 0x05,
-	NVME_FEAT_VOLATILE_WC	= 0x06,
-	NVME_FEAT_NUM_QUEUES	= 0x07,
-	NVME_FEAT_IRQ_COALESCE	= 0x08,
-	NVME_FEAT_IRQ_CONFIG	= 0x09,
-	NVME_FEAT_WRITE_ATOMIC	= 0x0a,
-	NVME_FEAT_ASYNC_EVENT	= 0x0b,
-	NVME_FEAT_SW_PROGRESS	= 0x0c,
-};
-
-struct nvme_identify {
-	__u8			opcode;
-	__u8			flags;
-	__u16			command_id;
-	__le32			nsid;
-	__u64			rsvd2[2];
-	__le64			prp1;
-	__le64			prp2;
-	__le32			cns;
-	__u32			rsvd11[5];
-};
-
-struct nvme_features {
-	__u8			opcode;
-	__u8			flags;
-	__u16			command_id;
-	__le32			nsid;
-	__u64			rsvd2[2];
-	__le64			prp1;
-	__le64			prp2;
-	__le32			fid;
-	__le32			dword11;
-	__u32			rsvd12[4];
-};
-
-struct nvme_create_cq {
-	__u8			opcode;
-	__u8			flags;
-	__u16			command_id;
-	__u32			rsvd1[5];
-	__le64			prp1;
-	__u64			rsvd8;
-	__le16			cqid;
-	__le16			qsize;
-	__le16			cq_flags;
-	__le16			irq_vector;
-	__u32			rsvd12[4];
-};
-
-struct nvme_create_sq {
-	__u8			opcode;
-	__u8			flags;
-	__u16			command_id;
-	__u32			rsvd1[5];
-	__le64			prp1;
-	__u64			rsvd8;
-	__le16			sqid;
-	__le16			qsize;
-	__le16			sq_flags;
-	__le16			cqid;
-	__u32			rsvd12[4];
-};
-
-struct nvme_delete_queue {
-	__u8			opcode;
-	__u8			flags;
-	__u16			command_id;
-	__u32			rsvd1[9];
-	__le16			qid;
-	__u16			rsvd10;
-	__u32			rsvd11[5];
-};
-
-struct nvme_download_firmware {
-	__u8			opcode;
-	__u8			flags;
-	__u16			command_id;
-	__u32			rsvd1[5];
-	__le64			prp1;
-	__le64			prp2;
-	__le32			numd;
-	__le32			offset;
-	__u32			rsvd12[4];
-};
-
-struct nvme_command {
-	union {
-		struct nvme_common_command common;
-		struct nvme_rw_command rw;
-		struct nvme_identify identify;
-		struct nvme_features features;
-		struct nvme_create_cq create_cq;
-		struct nvme_create_sq create_sq;
-		struct nvme_delete_queue delete_queue;
-		struct nvme_download_firmware dlfw;
-	};
-};
-
-enum {
-	NVME_SC_SUCCESS			= 0x0,
-	NVME_SC_INVALID_OPCODE		= 0x1,
-	NVME_SC_INVALID_FIELD		= 0x2,
-	NVME_SC_CMDID_CONFLICT		= 0x3,
-	NVME_SC_DATA_XFER_ERROR		= 0x4,
-	NVME_SC_POWER_LOSS		= 0x5,
-	NVME_SC_INTERNAL		= 0x6,
-	NVME_SC_ABORT_REQ		= 0x7,
-	NVME_SC_ABORT_QUEUE		= 0x8,
-	NVME_SC_FUSED_FAIL		= 0x9,
-	NVME_SC_FUSED_MISSING		= 0xa,
-	NVME_SC_INVALID_NS		= 0xb,
-	NVME_SC_LBA_RANGE		= 0x80,
-	NVME_SC_CAP_EXCEEDED		= 0x81,
-	NVME_SC_NS_NOT_READY		= 0x82,
-	NVME_SC_CQ_INVALID		= 0x100,
-	NVME_SC_QID_INVALID		= 0x101,
-	NVME_SC_QUEUE_SIZE		= 0x102,
-	NVME_SC_ABORT_LIMIT		= 0x103,
-	NVME_SC_ABORT_MISSING		= 0x104,
-	NVME_SC_ASYNC_LIMIT		= 0x105,
-	NVME_SC_FIRMWARE_SLOT		= 0x106,
-	NVME_SC_FIRMWARE_IMAGE		= 0x107,
-	NVME_SC_INVALID_VECTOR		= 0x108,
-	NVME_SC_INVALID_LOG_PAGE	= 0x109,
-	NVME_SC_INVALID_FORMAT		= 0x10a,
-	NVME_SC_BAD_ATTRIBUTES		= 0x180,
-	NVME_SC_WRITE_FAULT		= 0x280,
-	NVME_SC_READ_ERROR		= 0x281,
-	NVME_SC_GUARD_CHECK		= 0x282,
-	NVME_SC_APPTAG_CHECK		= 0x283,
-	NVME_SC_REFTAG_CHECK		= 0x284,
-	NVME_SC_COMPARE_FAILED		= 0x285,
-	NVME_SC_ACCESS_DENIED		= 0x286,
-};
-
-struct nvme_completion {
-	__le32	result;		/* Used by admin commands to return data */
-	__u32	rsvd;
-	__le16	sq_head;	/* how much of this queue may be reclaimed */
-	__le16	sq_id;		/* submission queue that generated this entry */
-	__u16	command_id;	/* of the command which completed */
-	__le16	status;		/* did the command fail, and if so, why? */
-};
-
-struct nvme_user_io {
-	__u8	opcode;
-	__u8	flags;
-	__u16	control;
-	__u16	nblocks;
-	__u16	rsvd;
-	__u64	metadata;
-	__u64	addr;
-	__u64	slba;
-	__u32	dsmgmt;
-	__u32	reftag;
-	__u16	apptag;
-	__u16	appmask;
-};
-
-struct nvme_admin_cmd {
-	__u8	opcode;
-	__u8	flags;
-	__u16	rsvd1;
-	__u32	nsid;
-	__u32	cdw2;
-	__u32	cdw3;
-	__u64	metadata;
-	__u64	addr;
-	__u32	metadata_len;
-	__u32	data_len;
-	__u32	cdw10;
-	__u32	cdw11;
-	__u32	cdw12;
-	__u32	cdw13;
-	__u32	cdw14;
-	__u32	cdw15;
-	__u32	timeout_ms;
-	__u32	result;
-};
-
-#define NVME_IOCTL_ID		_IO('N', 0x40)
-#define NVME_IOCTL_ADMIN_CMD	_IOWR('N', 0x41, struct nvme_admin_cmd)
-#define NVME_IOCTL_SUBMIT_IO	_IOW('N', 0x42, struct nvme_user_io)
-
-#endif /* _LINUX_NVME_H */
diff --git a/ANDROID_3.4.5/include/linux/nvram.h b/ANDROID_3.4.5/include/linux/nvram.h
deleted file mode 100644
index 9189829c..00000000
--- a/ANDROID_3.4.5/include/linux/nvram.h
+++ /dev/null
@@ -1,25 +0,0 @@
-#ifndef _LINUX_NVRAM_H
-#define _LINUX_NVRAM_H
-
-#include <linux/ioctl.h>
-
-/* /dev/nvram ioctls */
-#define NVRAM_INIT	_IO('p', 0x40) /* initialize NVRAM and set checksum */
-#define NVRAM_SETCKS	_IO('p', 0x41) /* recalculate checksum */
-
-/* for all current systems, this is where NVRAM starts */
-#define NVRAM_FIRST_BYTE    14
-/* all these functions expect an NVRAM offset, not an absolute */
-#define NVRAM_OFFSET(x)   ((x)-NVRAM_FIRST_BYTE)
-
-#ifdef __KERNEL__
-/* __foo is foo without grabbing the rtc_lock - get it yourself */
-extern unsigned char __nvram_read_byte(int i);
-extern unsigned char nvram_read_byte(int i);
-extern void __nvram_write_byte(unsigned char c, int i);
-extern void nvram_write_byte(unsigned char c, int i);
-extern int __nvram_check_checksum(void);
-extern int nvram_check_checksum(void);
-#endif
-
-#endif  /* _LINUX_NVRAM_H */
diff --git a/ANDROID_3.4.5/include/linux/nwpserial.h b/ANDROID_3.4.5/include/linux/nwpserial.h
deleted file mode 100644
index 9acb2157..00000000
--- a/ANDROID_3.4.5/include/linux/nwpserial.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- *  Serial Port driver for a NWP uart device
- *
- *    Copyright (C) 2008 IBM Corp., Benjamin Krill <ben@codiert.org>
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  as published by the Free Software Foundation; either version
- *  2 of the License, or (at your option) any later version.
- *
- */
-#ifndef _NWPSERIAL_H
-#define _NWPSERIAL_H
-
-int nwpserial_register_port(struct uart_port *port);
-void nwpserial_unregister_port(int line);
-
-#endif /* _NWPSERIAL_H */
diff --git a/ANDROID_3.4.5/include/linux/of.h b/ANDROID_3.4.5/include/linux/of.h
deleted file mode 100644
index fa7fb1d9..00000000
--- a/ANDROID_3.4.5/include/linux/of.h
+++ /dev/null
@@ -1,377 +0,0 @@
-#ifndef _LINUX_OF_H
-#define _LINUX_OF_H
-/*
- * Definitions for talking to the Open Firmware PROM on
- * Power Macintosh and other computers.
- *
- * Copyright (C) 1996-2005 Paul Mackerras.
- *
- * Updates for PPC64 by Peter Bergner & David Engebretsen, IBM Corp.
- * Updates for SPARC64 by David S. Miller
- * Derived from PowerPC and Sparc prom.h files by Stephen Rothwell, IBM Corp.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-#include <linux/types.h>
-#include <linux/bitops.h>
-#include <linux/errno.h>
-#include <linux/kref.h>
-#include <linux/mod_devicetable.h>
-#include <linux/spinlock.h>
-
-#include <asm/byteorder.h>
-#include <asm/errno.h>
-
-typedef u32 phandle;
-typedef u32 ihandle;
-
-struct property {
-	char	*name;
-	int	length;
-	void	*value;
-	struct property *next;
-	unsigned long _flags;
-	unsigned int unique_id;
-};
-
-#if defined(CONFIG_SPARC)
-struct of_irq_controller;
-#endif
-
-struct device_node {
-	const char *name;
-	const char *type;
-	phandle phandle;
-	char	*full_name;
-
-	struct	property *properties;
-	struct	property *deadprops;	/* removed properties */
-	struct	device_node *parent;
-	struct	device_node *child;
-	struct	device_node *sibling;
-	struct	device_node *next;	/* next device of same type */
-	struct	device_node *allnext;	/* next in list of all nodes */
-	struct	proc_dir_entry *pde;	/* this node's proc directory */
-	struct	kref kref;
-	unsigned long _flags;
-	void	*data;
-#if defined(CONFIG_SPARC)
-	char	*path_component_name;
-	unsigned int unique_id;
-	struct of_irq_controller *irq_trans;
-#endif
-};
-
-#define MAX_PHANDLE_ARGS 8
-struct of_phandle_args {
-	struct device_node *np;
-	int args_count;
-	uint32_t args[MAX_PHANDLE_ARGS];
-};
-
-#ifdef CONFIG_OF_DYNAMIC
-extern struct device_node *of_node_get(struct device_node *node);
-extern void of_node_put(struct device_node *node);
-#else /* CONFIG_OF_DYNAMIC */
-/* Dummy ref counting routines - to be implemented later */
-static inline struct device_node *of_node_get(struct device_node *node)
-{
-	return node;
-}
-static inline void of_node_put(struct device_node *node) { }
-#endif /* !CONFIG_OF_DYNAMIC */
-
-#ifdef CONFIG_OF
-
-/* Pointer for first entry in chain of all nodes. */
-extern struct device_node *allnodes;
-extern struct device_node *of_chosen;
-extern struct device_node *of_aliases;
-extern rwlock_t devtree_lock;
-
-static inline bool of_have_populated_dt(void)
-{
-	return allnodes != NULL;
-}
-
-static inline bool of_node_is_root(const struct device_node *node)
-{
-	return node && (node->parent == NULL);
-}
-
-static inline int of_node_check_flag(struct device_node *n, unsigned long flag)
-{
-	return test_bit(flag, &n->_flags);
-}
-
-static inline void of_node_set_flag(struct device_node *n, unsigned long flag)
-{
-	set_bit(flag, &n->_flags);
-}
-
-extern struct device_node *of_find_all_nodes(struct device_node *prev);
-
-/*
- * OF address retrieval & translation
- */
-
-/* Helper to read a big number; size is in cells (not bytes) */
-static inline u64 of_read_number(const __be32 *cell, int size)
-{
-	u64 r = 0;
-	while (size--)
-		r = (r << 32) | be32_to_cpu(*(cell++));
-	return r;
-}
-
-/* Like of_read_number, but we want an unsigned long result */
-static inline unsigned long of_read_ulong(const __be32 *cell, int size)
-{
-	/* toss away upper bits if unsigned long is smaller than u64 */
-	return of_read_number(cell, size);
-}
-
-#include <asm/prom.h>
-
-/* Default #address and #size cells.  Allow arch asm/prom.h to override */
-#if !defined(OF_ROOT_NODE_ADDR_CELLS_DEFAULT)
-#define OF_ROOT_NODE_ADDR_CELLS_DEFAULT 1
-#define OF_ROOT_NODE_SIZE_CELLS_DEFAULT 1
-#endif
-
-/* Default string compare functions, Allow arch asm/prom.h to override */
-#if !defined(of_compat_cmp)
-#define of_compat_cmp(s1, s2, l)	strcasecmp((s1), (s2))
-#define of_prop_cmp(s1, s2)		strcmp((s1), (s2))
-#define of_node_cmp(s1, s2)		strcasecmp((s1), (s2))
-#endif
-
-/* flag descriptions */
-#define OF_DYNAMIC	1 /* node and properties were allocated via kmalloc */
-#define OF_DETACHED	2 /* node has been detached from the device tree */
-
-#define OF_IS_DYNAMIC(x) test_bit(OF_DYNAMIC, &x->_flags)
-#define OF_MARK_DYNAMIC(x) set_bit(OF_DYNAMIC, &x->_flags)
-
-#define OF_BAD_ADDR	((u64)-1)
-
-#ifndef of_node_to_nid
-static inline int of_node_to_nid(struct device_node *np) { return -1; }
-#define of_node_to_nid of_node_to_nid
-#endif
-
-extern struct device_node *of_find_node_by_name(struct device_node *from,
-	const char *name);
-#define for_each_node_by_name(dn, name) \
-	for (dn = of_find_node_by_name(NULL, name); dn; \
-	     dn = of_find_node_by_name(dn, name))
-extern struct device_node *of_find_node_by_type(struct device_node *from,
-	const char *type);
-#define for_each_node_by_type(dn, type) \
-	for (dn = of_find_node_by_type(NULL, type); dn; \
-	     dn = of_find_node_by_type(dn, type))
-extern struct device_node *of_find_compatible_node(struct device_node *from,
-	const char *type, const char *compat);
-#define for_each_compatible_node(dn, type, compatible) \
-	for (dn = of_find_compatible_node(NULL, type, compatible); dn; \
-	     dn = of_find_compatible_node(dn, type, compatible))
-extern struct device_node *of_find_matching_node(struct device_node *from,
-	const struct of_device_id *matches);
-#define for_each_matching_node(dn, matches) \
-	for (dn = of_find_matching_node(NULL, matches); dn; \
-	     dn = of_find_matching_node(dn, matches))
-extern struct device_node *of_find_node_by_path(const char *path);
-extern struct device_node *of_find_node_by_phandle(phandle handle);
-extern struct device_node *of_get_parent(const struct device_node *node);
-extern struct device_node *of_get_next_parent(struct device_node *node);
-extern struct device_node *of_get_next_child(const struct device_node *node,
-					     struct device_node *prev);
-#define for_each_child_of_node(parent, child) \
-	for (child = of_get_next_child(parent, NULL); child != NULL; \
-	     child = of_get_next_child(parent, child))
-
-extern struct device_node *of_find_node_with_property(
-	struct device_node *from, const char *prop_name);
-#define for_each_node_with_property(dn, prop_name) \
-	for (dn = of_find_node_with_property(NULL, prop_name); dn; \
-	     dn = of_find_node_with_property(dn, prop_name))
-
-extern struct property *of_find_property(const struct device_node *np,
-					 const char *name,
-					 int *lenp);
-extern int of_property_read_u32_array(const struct device_node *np,
-				      const char *propname,
-				      u32 *out_values,
-				      size_t sz);
-extern int of_property_read_u64(const struct device_node *np,
-				const char *propname, u64 *out_value);
-
-extern int of_property_read_string(struct device_node *np,
-				   const char *propname,
-				   const char **out_string);
-extern int of_property_read_string_index(struct device_node *np,
-					 const char *propname,
-					 int index, const char **output);
-extern int of_property_match_string(struct device_node *np,
-				    const char *propname,
-				    const char *string);
-extern int of_property_count_strings(struct device_node *np,
-				     const char *propname);
-extern int of_device_is_compatible(const struct device_node *device,
-				   const char *);
-extern int of_device_is_available(const struct device_node *device);
-extern const void *of_get_property(const struct device_node *node,
-				const char *name,
-				int *lenp);
-#define for_each_property_of_node(dn, pp) \
-	for (pp = dn->properties; pp != NULL; pp = pp->next)
-
-extern int of_n_addr_cells(struct device_node *np);
-extern int of_n_size_cells(struct device_node *np);
-extern const struct of_device_id *of_match_node(
-	const struct of_device_id *matches, const struct device_node *node);
-extern int of_modalias_node(struct device_node *node, char *modalias, int len);
-extern struct device_node *of_parse_phandle(struct device_node *np,
-					    const char *phandle_name,
-					    int index);
-extern int of_parse_phandle_with_args(struct device_node *np,
-	const char *list_name, const char *cells_name, int index,
-	struct of_phandle_args *out_args);
-
-extern void of_alias_scan(void * (*dt_alloc)(u64 size, u64 align));
-extern int of_alias_get_id(struct device_node *np, const char *stem);
-
-extern int of_machine_is_compatible(const char *compat);
-
-extern int prom_add_property(struct device_node* np, struct property* prop);
-extern int prom_remove_property(struct device_node *np, struct property *prop);
-extern int prom_update_property(struct device_node *np,
-				struct property *newprop,
-				struct property *oldprop);
-
-#if defined(CONFIG_OF_DYNAMIC)
-/* For updating the device tree at runtime */
-extern void of_attach_node(struct device_node *);
-extern void of_detach_node(struct device_node *);
-#endif
-
-#define of_match_ptr(_ptr)	(_ptr)
-#else /* CONFIG_OF */
-
-static inline bool of_have_populated_dt(void)
-{
-	return false;
-}
-
-#define for_each_child_of_node(parent, child) \
-	while (0)
-
-static inline int of_device_is_compatible(const struct device_node *device,
-					  const char *name)
-{
-	return 0;
-}
-
-static inline struct property *of_find_property(const struct device_node *np,
-						const char *name,
-						int *lenp)
-{
-	return NULL;
-}
-
-static inline struct device_node *of_find_compatible_node(
-						struct device_node *from,
-						const char *type,
-						const char *compat)
-{
-	return NULL;
-}
-
-static inline int of_property_read_u32_array(const struct device_node *np,
-					     const char *propname,
-					     u32 *out_values, size_t sz)
-{
-	return -ENOSYS;
-}
-
-static inline int of_property_read_string(struct device_node *np,
-					  const char *propname,
-					  const char **out_string)
-{
-	return -ENOSYS;
-}
-
-static inline int of_property_read_string_index(struct device_node *np,
-						const char *propname, int index,
-						const char **out_string)
-{
-	return -ENOSYS;
-}
-
-static inline int of_property_count_strings(struct device_node *np,
-					    const char *propname)
-{
-	return -ENOSYS;
-}
-
-static inline const void *of_get_property(const struct device_node *node,
-				const char *name,
-				int *lenp)
-{
-	return NULL;
-}
-
-static inline int of_property_read_u64(const struct device_node *np,
-				       const char *propname, u64 *out_value)
-{
-	return -ENOSYS;
-}
-
-static inline struct device_node *of_parse_phandle(struct device_node *np,
-						   const char *phandle_name,
-						   int index)
-{
-	return NULL;
-}
-
-static inline int of_alias_get_id(struct device_node *np, const char *stem)
-{
-	return -ENOSYS;
-}
-
-static inline int of_machine_is_compatible(const char *compat)
-{
-	return 0;
-}
-
-#define of_match_ptr(_ptr)	NULL
-#define of_match_node(_matches, _node)	NULL
-#endif /* CONFIG_OF */
-
-/**
- * of_property_read_bool - Findfrom a property
- * @np:		device node from which the property value is to be read.
- * @propname:	name of the property to be searched.
- *
- * Search for a property in a device node.
- * Returns true if the property exist false otherwise.
- */
-static inline bool of_property_read_bool(const struct device_node *np,
-					 const char *propname)
-{
-	struct property *prop = of_find_property(np, propname, NULL);
-
-	return prop ? true : false;
-}
-
-static inline int of_property_read_u32(const struct device_node *np,
-				       const char *propname,
-				       u32 *out_value)
-{
-	return of_property_read_u32_array(np, propname, out_value, 1);
-}
-
-#endif /* _LINUX_OF_H */
diff --git a/ANDROID_3.4.5/include/linux/of_address.h b/ANDROID_3.4.5/include/linux/of_address.h
deleted file mode 100644
index 01b925ad..00000000
--- a/ANDROID_3.4.5/include/linux/of_address.h
+++ /dev/null
@@ -1,74 +0,0 @@
-#ifndef __OF_ADDRESS_H
-#define __OF_ADDRESS_H
-#include <linux/ioport.h>
-#include <linux/errno.h>
-#include <linux/of.h>
-
-#ifdef CONFIG_OF_ADDRESS
-extern u64 of_translate_address(struct device_node *np, const __be32 *addr);
-extern int of_address_to_resource(struct device_node *dev, int index,
-				  struct resource *r);
-extern struct device_node *of_find_matching_node_by_address(
-					struct device_node *from,
-					const struct of_device_id *matches,
-					u64 base_address);
-extern void __iomem *of_iomap(struct device_node *device, int index);
-
-/* Extract an address from a device, returns the region size and
- * the address space flags too. The PCI version uses a BAR number
- * instead of an absolute index
- */
-extern const u32 *of_get_address(struct device_node *dev, int index,
-			   u64 *size, unsigned int *flags);
-
-#ifndef pci_address_to_pio
-static inline unsigned long pci_address_to_pio(phys_addr_t addr) { return -1; }
-#define pci_address_to_pio pci_address_to_pio
-#endif
-
-#else /* CONFIG_OF_ADDRESS */
-static inline int of_address_to_resource(struct device_node *dev, int index,
-					 struct resource *r)
-{
-	return -EINVAL;
-}
-static inline struct device_node *of_find_matching_node_by_address(
-					struct device_node *from,
-					const struct of_device_id *matches,
-					u64 base_address)
-{
-	return NULL;
-}
-static inline void __iomem *of_iomap(struct device_node *device, int index)
-{
-	return NULL;
-}
-static inline const u32 *of_get_address(struct device_node *dev, int index,
-					u64 *size, unsigned int *flags)
-{
-	return NULL;
-}
-#endif /* CONFIG_OF_ADDRESS */
-
-
-#if defined(CONFIG_OF_ADDRESS) && defined(CONFIG_PCI)
-extern const __be32 *of_get_pci_address(struct device_node *dev, int bar_no,
-			       u64 *size, unsigned int *flags);
-extern int of_pci_address_to_resource(struct device_node *dev, int bar,
-				      struct resource *r);
-#else /* CONFIG_OF_ADDRESS && CONFIG_PCI */
-static inline int of_pci_address_to_resource(struct device_node *dev, int bar,
-				             struct resource *r)
-{
-	return -ENOSYS;
-}
-
-static inline const __be32 *of_get_pci_address(struct device_node *dev,
-		int bar_no, u64 *size, unsigned int *flags)
-{
-	return NULL;
-}
-#endif /* CONFIG_OF_ADDRESS && CONFIG_PCI */
-
-#endif /* __OF_ADDRESS_H */
-
diff --git a/ANDROID_3.4.5/include/linux/of_device.h b/ANDROID_3.4.5/include/linux/of_device.h
deleted file mode 100644
index 901b7435..00000000
--- a/ANDROID_3.4.5/include/linux/of_device.h
+++ /dev/null
@@ -1,72 +0,0 @@
-#ifndef _LINUX_OF_DEVICE_H
-#define _LINUX_OF_DEVICE_H
-
-#include <linux/platform_device.h>
-#include <linux/of_platform.h> /* temporary until merge */
-
-#ifdef CONFIG_OF_DEVICE
-#include <linux/of.h>
-#include <linux/mod_devicetable.h>
-
-struct device;
-
-extern const struct of_device_id *of_match_device(
-	const struct of_device_id *matches, const struct device *dev);
-extern void of_device_make_bus_id(struct device *dev);
-
-/**
- * of_driver_match_device - Tell if a driver's of_match_table matches a device.
- * @drv: the device_driver structure to test
- * @dev: the device structure to match against
- */
-static inline int of_driver_match_device(struct device *dev,
-					 const struct device_driver *drv)
-{
-	return of_match_device(drv->of_match_table, dev) != NULL;
-}
-
-extern struct platform_device *of_dev_get(struct platform_device *dev);
-extern void of_dev_put(struct platform_device *dev);
-
-extern int of_device_add(struct platform_device *pdev);
-extern int of_device_register(struct platform_device *ofdev);
-extern void of_device_unregister(struct platform_device *ofdev);
-
-extern ssize_t of_device_get_modalias(struct device *dev,
-					char *str, ssize_t len);
-
-extern void of_device_uevent(struct device *dev, struct kobj_uevent_env *env);
-extern int of_device_uevent_modalias(struct device *dev, struct kobj_uevent_env *env);
-
-static inline void of_device_node_put(struct device *dev)
-{
-	of_node_put(dev->of_node);
-}
-
-#else /* CONFIG_OF_DEVICE */
-
-static inline int of_driver_match_device(struct device *dev,
-					 struct device_driver *drv)
-{
-	return 0;
-}
-
-static inline void of_device_uevent(struct device *dev,
-			struct kobj_uevent_env *env) { }
-
-static inline int of_device_uevent_modalias(struct device *dev,
-				   struct kobj_uevent_env *env)
-{
-	return -ENODEV;
-}
-
-static inline void of_device_node_put(struct device *dev) { }
-
-static inline const struct of_device_id *of_match_device(
-		const struct of_device_id *matches, const struct device *dev)
-{
-	return NULL;
-}
-#endif /* CONFIG_OF_DEVICE */
-
-#endif /* _LINUX_OF_DEVICE_H */
diff --git a/ANDROID_3.4.5/include/linux/of_fdt.h b/ANDROID_3.4.5/include/linux/of_fdt.h
deleted file mode 100644
index ed136ad6..00000000
--- a/ANDROID_3.4.5/include/linux/of_fdt.h
+++ /dev/null
@@ -1,125 +0,0 @@
-/*
- * Definitions for working with the Flattened Device Tree data format
- *
- * Copyright 2009 Benjamin Herrenschmidt, IBM Corp
- * benh@kernel.crashing.org
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- */
-
-#ifndef _LINUX_OF_FDT_H
-#define _LINUX_OF_FDT_H
-
-#include <linux/types.h>
-#include <linux/init.h>
-
-/* Definitions used by the flattened device tree */
-#define OF_DT_HEADER		0xd00dfeed	/* marker */
-#define OF_DT_BEGIN_NODE	0x1		/* Start of node, full name */
-#define OF_DT_END_NODE		0x2		/* End node */
-#define OF_DT_PROP		0x3		/* Property: name off, size,
-						 * content */
-#define OF_DT_NOP		0x4		/* nop */
-#define OF_DT_END		0x9
-
-#define OF_DT_VERSION		0x10
-
-#ifndef __ASSEMBLY__
-/*
- * This is what gets passed to the kernel by prom_init or kexec
- *
- * The dt struct contains the device tree structure, full pathes and
- * property contents. The dt strings contain a separate block with just
- * the strings for the property names, and is fully page aligned and
- * self contained in a page, so that it can be kept around by the kernel,
- * each property name appears only once in this page (cheap compression)
- *
- * the mem_rsvmap contains a map of reserved ranges of physical memory,
- * passing it here instead of in the device-tree itself greatly simplifies
- * the job of everybody. It's just a list of u64 pairs (base/size) that
- * ends when size is 0
- */
-struct boot_param_header {
-	__be32	magic;			/* magic word OF_DT_HEADER */
-	__be32	totalsize;		/* total size of DT block */
-	__be32	off_dt_struct;		/* offset to structure */
-	__be32	off_dt_strings;		/* offset to strings */
-	__be32	off_mem_rsvmap;		/* offset to memory reserve map */
-	__be32	version;		/* format version */
-	__be32	last_comp_version;	/* last compatible version */
-	/* version 2 fields below */
-	__be32	boot_cpuid_phys;	/* Physical CPU id we're booting on */
-	/* version 3 fields below */
-	__be32	dt_strings_size;	/* size of the DT strings block */
-	/* version 17 fields below */
-	__be32	dt_struct_size;		/* size of the DT structure block */
-};
-
-#if defined(CONFIG_OF_FLATTREE)
-
-struct device_node;
-
-/* For scanning an arbitrary device-tree at any time */
-extern char *of_fdt_get_string(struct boot_param_header *blob, u32 offset);
-extern void *of_fdt_get_property(struct boot_param_header *blob,
-				 unsigned long node,
-				 const char *name,
-				 unsigned long *size);
-extern int of_fdt_is_compatible(struct boot_param_header *blob,
-				unsigned long node,
-				const char *compat);
-extern int of_fdt_match(struct boot_param_header *blob, unsigned long node,
-			const char *const *compat);
-extern void of_fdt_unflatten_tree(unsigned long *blob,
-			       struct device_node **mynodes);
-
-/* TBD: Temporary export of fdt globals - remove when code fully merged */
-extern int __initdata dt_root_addr_cells;
-extern int __initdata dt_root_size_cells;
-extern struct boot_param_header *initial_boot_params;
-
-/* For scanning the flat device-tree at boot time */
-extern char *find_flat_dt_string(u32 offset);
-extern int of_scan_flat_dt(int (*it)(unsigned long node, const char *uname,
-				     int depth, void *data),
-			   void *data);
-extern void *of_get_flat_dt_prop(unsigned long node, const char *name,
-				 unsigned long *size);
-extern int of_flat_dt_is_compatible(unsigned long node, const char *name);
-extern int of_flat_dt_match(unsigned long node, const char *const *matches);
-extern unsigned long of_get_flat_dt_root(void);
-
-extern int early_init_dt_scan_chosen(unsigned long node, const char *uname,
-				     int depth, void *data);
-extern void early_init_dt_check_for_initrd(unsigned long node);
-extern int early_init_dt_scan_memory(unsigned long node, const char *uname,
-				     int depth, void *data);
-extern void early_init_dt_add_memory_arch(u64 base, u64 size);
-extern void * early_init_dt_alloc_memory_arch(u64 size, u64 align);
-extern u64 dt_mem_next_cell(int s, __be32 **cellp);
-
-/*
- * If BLK_DEV_INITRD, the fdt early init code will call this function,
- * to be provided by the arch code. start and end are specified as
- * physical addresses.
- */
-#ifdef CONFIG_BLK_DEV_INITRD
-extern void early_init_dt_setup_initrd_arch(unsigned long start,
-					    unsigned long end);
-#endif
-
-/* Early flat tree scan hooks */
-extern int early_init_dt_scan_root(unsigned long node, const char *uname,
-				   int depth, void *data);
-
-/* Other Prototypes */
-extern void unflatten_device_tree(void);
-extern void early_init_devtree(void *);
-#else /* CONFIG_OF_FLATTREE */
-static inline void unflatten_device_tree(void) {}
-#endif /* CONFIG_OF_FLATTREE */
-
-#endif /* __ASSEMBLY__ */
-#endif /* _LINUX_OF_FDT_H */
diff --git a/ANDROID_3.4.5/include/linux/of_gpio.h b/ANDROID_3.4.5/include/linux/of_gpio.h
deleted file mode 100644
index 81733d12..00000000
--- a/ANDROID_3.4.5/include/linux/of_gpio.h
+++ /dev/null
@@ -1,158 +0,0 @@
-/*
- * OF helpers for the GPIO API
- *
- * Copyright (c) 2007-2008  MontaVista Software, Inc.
- *
- * Author: Anton Vorontsov <avorontsov@ru.mvista.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef __LINUX_OF_GPIO_H
-#define __LINUX_OF_GPIO_H
-
-#include <linux/compiler.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/gpio.h>
-#include <linux/of.h>
-
-struct device_node;
-
-/*
- * This is Linux-specific flags. By default controllers' and Linux' mapping
- * match, but GPIO controllers are free to translate their own flags to
- * Linux-specific in their .xlate callback. Though, 1:1 mapping is recommended.
- */
-enum of_gpio_flags {
-	OF_GPIO_ACTIVE_LOW = 0x1,
-};
-
-#ifdef CONFIG_OF_GPIO
-
-/*
- * OF GPIO chip for memory mapped banks
- */
-struct of_mm_gpio_chip {
-	struct gpio_chip gc;
-	void (*save_regs)(struct of_mm_gpio_chip *mm_gc);
-	void __iomem *regs;
-};
-
-static inline struct of_mm_gpio_chip *to_of_mm_gpio_chip(struct gpio_chip *gc)
-{
-	return container_of(gc, struct of_mm_gpio_chip, gc);
-}
-
-extern int of_get_named_gpio_flags(struct device_node *np,
-		const char *list_name, int index, enum of_gpio_flags *flags);
-
-extern unsigned int of_gpio_named_count(struct device_node *np,
-					const char* propname);
-
-extern int of_mm_gpiochip_add(struct device_node *np,
-			      struct of_mm_gpio_chip *mm_gc);
-
-extern void of_gpiochip_add(struct gpio_chip *gc);
-extern void of_gpiochip_remove(struct gpio_chip *gc);
-extern struct gpio_chip *of_node_to_gpiochip(struct device_node *np);
-extern int of_gpio_simple_xlate(struct gpio_chip *gc,
-				const struct of_phandle_args *gpiospec,
-				u32 *flags);
-
-#else /* CONFIG_OF_GPIO */
-
-/* Drivers may not strictly depend on the GPIO support, so let them link. */
-static inline int of_get_named_gpio_flags(struct device_node *np,
-		const char *list_name, int index, enum of_gpio_flags *flags)
-{
-	return -ENOSYS;
-}
-
-static inline unsigned int of_gpio_named_count(struct device_node *np,
-					const char* propname)
-{
-	return 0;
-}
-
-static inline int of_gpio_simple_xlate(struct gpio_chip *gc,
-				       const struct of_phandle_args *gpiospec,
-				       u32 *flags)
-{
-	return -ENOSYS;
-}
-
-static inline void of_gpiochip_add(struct gpio_chip *gc) { }
-static inline void of_gpiochip_remove(struct gpio_chip *gc) { }
-
-#endif /* CONFIG_OF_GPIO */
-
-/**
- * of_gpio_count - Count GPIOs for a device
- * @np:		device node to count GPIOs for
- *
- * The function returns the count of GPIOs specified for a node.
- *
- * Note that the empty GPIO specifiers counts too. For example,
- *
- * gpios = <0
- *          &pio1 1 2
- *          0
- *          &pio2 3 4>;
- *
- * defines four GPIOs (so this function will return 4), two of which
- * are not specified.
- */
-static inline unsigned int of_gpio_count(struct device_node *np)
-{
-	return of_gpio_named_count(np, "gpios");
-}
-
-/**
- * of_get_gpio_flags() - Get a GPIO number and flags to use with GPIO API
- * @np:		device node to get GPIO from
- * @index:	index of the GPIO
- * @flags:	a flags pointer to fill in
- *
- * Returns GPIO number to use with Linux generic GPIO API, or one of the errno
- * value on the error condition. If @flags is not NULL the function also fills
- * in flags for the GPIO.
- */
-static inline int of_get_gpio_flags(struct device_node *np, int index,
-		      enum of_gpio_flags *flags)
-{
-	return of_get_named_gpio_flags(np, "gpios", index, flags);
-}
-
-/**
- * of_get_named_gpio() - Get a GPIO number to use with GPIO API
- * @np:		device node to get GPIO from
- * @propname:	Name of property containing gpio specifier(s)
- * @index:	index of the GPIO
- *
- * Returns GPIO number to use with Linux generic GPIO API, or one of the errno
- * value on the error condition.
- */
-static inline int of_get_named_gpio(struct device_node *np,
-                                   const char *propname, int index)
-{
-	return of_get_named_gpio_flags(np, propname, index, NULL);
-}
-
-/**
- * of_get_gpio() - Get a GPIO number to use with GPIO API
- * @np:		device node to get GPIO from
- * @index:	index of the GPIO
- *
- * Returns GPIO number to use with Linux generic GPIO API, or one of the errno
- * value on the error condition.
- */
-static inline int of_get_gpio(struct device_node *np, int index)
-{
-	return of_get_gpio_flags(np, index, NULL);
-}
-
-#endif /* __LINUX_OF_GPIO_H */
diff --git a/ANDROID_3.4.5/include/linux/of_i2c.h b/ANDROID_3.4.5/include/linux/of_i2c.h
deleted file mode 100644
index 0efe8d46..00000000
--- a/ANDROID_3.4.5/include/linux/of_i2c.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
- * Generic I2C API implementation for PowerPC.
- *
- * Copyright (c) 2008 Jochen Friedrich <jochen@scram.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef __LINUX_OF_I2C_H
-#define __LINUX_OF_I2C_H
-
-#if defined(CONFIG_OF_I2C) || defined(CONFIG_OF_I2C_MODULE)
-#include <linux/i2c.h>
-
-extern void of_i2c_register_devices(struct i2c_adapter *adap);
-
-/* must call put_device() when done with returned i2c_client device */
-extern struct i2c_client *of_find_i2c_device_by_node(struct device_node *node);
-
-#else
-static inline void of_i2c_register_devices(struct i2c_adapter *adap)
-{
-	return;
-}
-#endif /* CONFIG_OF_I2C */
-
-#endif /* __LINUX_OF_I2C_H */
diff --git a/ANDROID_3.4.5/include/linux/of_irq.h b/ANDROID_3.4.5/include/linux/of_irq.h
deleted file mode 100644
index d229ad3e..00000000
--- a/ANDROID_3.4.5/include/linux/of_irq.h
+++ /dev/null
@@ -1,80 +0,0 @@
-#ifndef __OF_IRQ_H
-#define __OF_IRQ_H
-
-#if defined(CONFIG_OF)
-struct of_irq;
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <linux/irq.h>
-#include <linux/irqdomain.h>
-#include <linux/ioport.h>
-#include <linux/of.h>
-
-/*
- * irq_of_parse_and_map() is used ba all OF enabled platforms; but SPARC
- * implements it differently.  However, the prototype is the same for all,
- * so declare it here regardless of the CONFIG_OF_IRQ setting.
- */
-extern unsigned int irq_of_parse_and_map(struct device_node *node, int index);
-
-#if defined(CONFIG_OF_IRQ)
-/**
- * of_irq - container for device_node/irq_specifier pair for an irq controller
- * @controller: pointer to interrupt controller device tree node
- * @size: size of interrupt specifier
- * @specifier: array of cells @size long specifing the specific interrupt
- *
- * This structure is returned when an interrupt is mapped. The controller
- * field needs to be put() after use
- */
-#define OF_MAX_IRQ_SPEC		4 /* We handle specifiers of at most 4 cells */
-struct of_irq {
-	struct device_node *controller; /* Interrupt controller node */
-	u32 size; /* Specifier size */
-	u32 specifier[OF_MAX_IRQ_SPEC]; /* Specifier copy */
-};
-
-typedef int (*of_irq_init_cb_t)(struct device_node *, struct device_node *);
-
-/*
- * Workarounds only applied to 32bit powermac machines
- */
-#define OF_IMAP_OLDWORLD_MAC	0x00000001
-#define OF_IMAP_NO_PHANDLE	0x00000002
-
-#if defined(CONFIG_PPC32) && defined(CONFIG_PPC_PMAC)
-extern unsigned int of_irq_workarounds;
-extern struct device_node *of_irq_dflt_pic;
-extern int of_irq_map_oldworld(struct device_node *device, int index,
-			       struct of_irq *out_irq);
-#else /* CONFIG_PPC32 && CONFIG_PPC_PMAC */
-#define of_irq_workarounds (0)
-#define of_irq_dflt_pic (NULL)
-static inline int of_irq_map_oldworld(struct device_node *device, int index,
-				      struct of_irq *out_irq)
-{
-	return -EINVAL;
-}
-#endif /* CONFIG_PPC32 && CONFIG_PPC_PMAC */
-
-
-extern int of_irq_map_raw(struct device_node *parent, const u32 *intspec,
-			  u32 ointsize, const u32 *addr,
-			  struct of_irq *out_irq);
-extern int of_irq_map_one(struct device_node *device, int index,
-			  struct of_irq *out_irq);
-extern unsigned int irq_create_of_mapping(struct device_node *controller,
-					  const u32 *intspec,
-					  unsigned int intsize);
-extern int of_irq_to_resource(struct device_node *dev, int index,
-			      struct resource *r);
-extern int of_irq_count(struct device_node *dev);
-extern int of_irq_to_resource_table(struct device_node *dev,
-		struct resource *res, int nr_irqs);
-extern struct device_node *of_irq_find_parent(struct device_node *child);
-
-extern void of_irq_init(const struct of_device_id *matches);
-
-#endif /* CONFIG_OF_IRQ */
-#endif /* CONFIG_OF */
-#endif /* __OF_IRQ_H */
diff --git a/ANDROID_3.4.5/include/linux/of_mdio.h b/ANDROID_3.4.5/include/linux/of_mdio.h
deleted file mode 100644
index 53b94e02..00000000
--- a/ANDROID_3.4.5/include/linux/of_mdio.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * OF helpers for the MDIO (Ethernet PHY) API
- *
- * Copyright (c) 2009 Secret Lab Technologies, Ltd.
- *
- * This file is released under the GPLv2
- */
-
-#ifndef __LINUX_OF_MDIO_H
-#define __LINUX_OF_MDIO_H
-
-#include <linux/phy.h>
-#include <linux/of.h>
-
-extern int of_mdiobus_register(struct mii_bus *mdio, struct device_node *np);
-extern struct phy_device *of_phy_find_device(struct device_node *phy_np);
-extern struct phy_device *of_phy_connect(struct net_device *dev,
-					 struct device_node *phy_np,
-					 void (*hndlr)(struct net_device *),
-					 u32 flags, phy_interface_t iface);
-extern struct phy_device *of_phy_connect_fixed_link(struct net_device *dev,
-					 void (*hndlr)(struct net_device *),
-					 phy_interface_t iface);
-
-#endif /* __LINUX_OF_MDIO_H */
diff --git a/ANDROID_3.4.5/include/linux/of_mtd.h b/ANDROID_3.4.5/include/linux/of_mtd.h
deleted file mode 100644
index bae1b609..00000000
--- a/ANDROID_3.4.5/include/linux/of_mtd.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * Copyright 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- *
- * OF helpers for mtd.
- *
- * This file is released under the GPLv2
- */
-
-#ifndef __LINUX_OF_MTD_H
-#define __LINUX_OF_NET_H
-
-#ifdef CONFIG_OF_MTD
-#include <linux/of.h>
-extern const int of_get_nand_ecc_mode(struct device_node *np);
-int of_get_nand_bus_width(struct device_node *np);
-bool of_get_nand_on_flash_bbt(struct device_node *np);
-#endif
-
-#endif /* __LINUX_OF_MTD_H */
diff --git a/ANDROID_3.4.5/include/linux/of_net.h b/ANDROID_3.4.5/include/linux/of_net.h
deleted file mode 100644
index f4746418..00000000
--- a/ANDROID_3.4.5/include/linux/of_net.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- * OF helpers for network devices.
- *
- * This file is released under the GPLv2
- */
-
-#ifndef __LINUX_OF_NET_H
-#define __LINUX_OF_NET_H
-
-#ifdef CONFIG_OF_NET
-#include <linux/of.h>
-extern const int of_get_phy_mode(struct device_node *np);
-extern const void *of_get_mac_address(struct device_node *np);
-#endif
-
-#endif /* __LINUX_OF_NET_H */
diff --git a/ANDROID_3.4.5/include/linux/of_pci.h b/ANDROID_3.4.5/include/linux/of_pci.h
deleted file mode 100644
index f93e2170..00000000
--- a/ANDROID_3.4.5/include/linux/of_pci.h
+++ /dev/null
@@ -1,14 +0,0 @@
-#ifndef __OF_PCI_H
-#define __OF_PCI_H
-
-#include <linux/pci.h>
-
-struct pci_dev;
-struct of_irq;
-int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq);
-
-struct device_node;
-struct device_node *of_pci_find_child_device(struct device_node *parent,
-					     unsigned int devfn);
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/of_pdt.h b/ANDROID_3.4.5/include/linux/of_pdt.h
deleted file mode 100644
index c65a18a0..00000000
--- a/ANDROID_3.4.5/include/linux/of_pdt.h
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- * Definitions for building a device tree by calling into the
- * Open Firmware PROM.
- *
- * Copyright (C) 2010  Andres Salomon <dilinger@queued.net>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#ifndef _LINUX_OF_PDT_H
-#define _LINUX_OF_PDT_H
-
-/* overridable operations for calling into the PROM */
-struct of_pdt_ops {
-	/*
-	 * buf should be 32 bytes; return 0 on success.
-	 * If prev is NULL, the first property will be returned.
-	 */
-	int (*nextprop)(phandle node, char *prev, char *buf);
-
-	/* for both functions, return proplen on success; -1 on error */
-	int (*getproplen)(phandle node, const char *prop);
-	int (*getproperty)(phandle node, const char *prop, char *buf,
-			int bufsize);
-
-	/* phandles are 0 if no child or sibling exists */
-	phandle (*getchild)(phandle parent);
-	phandle (*getsibling)(phandle node);
-
-	/* return 0 on success; fill in 'len' with number of bytes in path */
-	int (*pkg2path)(phandle node, char *buf, const int buflen, int *len);
-};
-
-extern void *prom_early_alloc(unsigned long size);
-
-/* for building the device tree */
-extern void of_pdt_build_devicetree(phandle root_node, struct of_pdt_ops *ops);
-
-extern void (*of_pdt_build_more)(struct device_node *dp,
-		struct device_node ***nextp);
-
-#endif /* _LINUX_OF_PDT_H */
diff --git a/ANDROID_3.4.5/include/linux/of_platform.h b/ANDROID_3.4.5/include/linux/of_platform.h
deleted file mode 100644
index b47d2040..00000000
--- a/ANDROID_3.4.5/include/linux/of_platform.h
+++ /dev/null
@@ -1,112 +0,0 @@
-#ifndef _LINUX_OF_PLATFORM_H
-#define _LINUX_OF_PLATFORM_H
-/*
- *    Copyright (C) 2006 Benjamin Herrenschmidt, IBM Corp.
- *			 <benh@kernel.crashing.org>
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  as published by the Free Software Foundation; either version
- *  2 of the License, or (at your option) any later version.
- *
- */
-
-#ifdef CONFIG_OF_DEVICE
-#include <linux/device.h>
-#include <linux/mod_devicetable.h>
-#include <linux/pm.h>
-#include <linux/of_device.h>
-#include <linux/platform_device.h>
-
-/**
- * struct of_dev_auxdata - lookup table entry for device names & platform_data
- * @compatible: compatible value of node to match against node
- * @phys_addr: Start address of registers to match against node
- * @name: Name to assign for matching nodes
- * @platform_data: platform_data to assign for matching nodes
- *
- * This lookup table allows the caller of of_platform_populate() to override
- * the names of devices when creating devices from the device tree.  The table
- * should be terminated with an empty entry.  It also allows the platform_data
- * pointer to be set.
- *
- * The reason for this functionality is that some Linux infrastructure uses
- * the device name to look up a specific device, but the Linux-specific names
- * are not encoded into the device tree, so the kernel needs to provide specific
- * values.
- *
- * Note: Using an auxdata lookup table should be considered a last resort when
- * converting a platform to use the DT.  Normally the automatically generated
- * device name will not matter, and drivers should obtain data from the device
- * node instead of from an anonymouns platform_data pointer.
- */
-struct of_dev_auxdata {
-	char *compatible;
-	resource_size_t phys_addr;
-	char *name;
-	void *platform_data;
-};
-
-/* Macro to simplify populating a lookup table */
-#define OF_DEV_AUXDATA(_compat,_phys,_name,_pdata) \
-	{ .compatible = _compat, .phys_addr = _phys, .name = _name, \
-	  .platform_data = _pdata }
-
-/**
- * of_platform_driver - Legacy of-aware driver for platform devices.
- *
- * An of_platform_driver driver is attached to a basic platform_device on
- * the ibm ebus (ibmebus_bus_type).
- */
-struct of_platform_driver
-{
-	int	(*probe)(struct platform_device* dev,
-			 const struct of_device_id *match);
-	int	(*remove)(struct platform_device* dev);
-
-	int	(*suspend)(struct platform_device* dev, pm_message_t state);
-	int	(*resume)(struct platform_device* dev);
-	int	(*shutdown)(struct platform_device* dev);
-
-	struct device_driver	driver;
-};
-#define	to_of_platform_driver(drv) \
-	container_of(drv,struct of_platform_driver, driver)
-
-extern const struct of_device_id of_default_bus_match_table[];
-
-/* Platform drivers register/unregister */
-extern struct platform_device *of_device_alloc(struct device_node *np,
-					 const char *bus_id,
-					 struct device *parent);
-extern struct platform_device *of_find_device_by_node(struct device_node *np);
-
-#ifdef CONFIG_OF_ADDRESS /* device reg helpers depend on OF_ADDRESS */
-/* Platform devices and busses creation */
-extern struct platform_device *of_platform_device_create(struct device_node *np,
-						   const char *bus_id,
-						   struct device *parent);
-
-extern int of_platform_bus_probe(struct device_node *root,
-				 const struct of_device_id *matches,
-				 struct device *parent);
-extern int of_platform_populate(struct device_node *root,
-				const struct of_device_id *matches,
-				const struct of_dev_auxdata *lookup,
-				struct device *parent);
-#endif /* CONFIG_OF_ADDRESS */
-
-#endif /* CONFIG_OF_DEVICE */
-
-#if !defined(CONFIG_OF_ADDRESS)
-struct of_dev_auxdata;
-static inline int of_platform_populate(struct device_node *root,
-					const struct of_device_id *matches,
-					const struct of_dev_auxdata *lookup,
-					struct device *parent)
-{
-	return -ENODEV;
-}
-#endif /* !CONFIG_OF_ADDRESS */
-
-#endif	/* _LINUX_OF_PLATFORM_H */
diff --git a/ANDROID_3.4.5/include/linux/of_spi.h b/ANDROID_3.4.5/include/linux/of_spi.h
deleted file mode 100644
index 9e3e70f7..00000000
--- a/ANDROID_3.4.5/include/linux/of_spi.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * OpenFirmware SPI support routines
- * Copyright (C) 2008 Secret Lab Technologies Ltd.
- *
- * Support routines for deriving SPI device attachments from the device
- * tree.
- */
-
-#ifndef __LINUX_OF_SPI_H
-#define __LINUX_OF_SPI_H
-
-#include <linux/spi/spi.h>
-
-#if defined(CONFIG_OF_SPI) || defined(CONFIG_OF_SPI_MODULE)
-extern void of_register_spi_devices(struct spi_master *master);
-#else
-static inline void of_register_spi_devices(struct spi_master *master)
-{
-	return;
-}
-#endif /* CONFIG_OF_SPI */
-
-#endif /* __LINUX_OF_SPI */
diff --git a/ANDROID_3.4.5/include/linux/omap3isp.h b/ANDROID_3.4.5/include/linux/omap3isp.h
deleted file mode 100644
index c73a34c3..00000000
--- a/ANDROID_3.4.5/include/linux/omap3isp.h
+++ /dev/null
@@ -1,644 +0,0 @@
-/*
- * omap3isp.h
- *
- * TI OMAP3 ISP - User-space API
- *
- * Copyright (C) 2010 Nokia Corporation
- * Copyright (C) 2009 Texas Instruments, Inc.
- *
- * Contacts: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
- *	     Sakari Ailus <sakari.ailus@iki.fi>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- */
-
-#ifndef OMAP3_ISP_USER_H
-#define OMAP3_ISP_USER_H
-
-#include <linux/types.h>
-
-/*
- * Private IOCTLs
- *
- * VIDIOC_OMAP3ISP_CCDC_CFG: Set CCDC configuration
- * VIDIOC_OMAP3ISP_PRV_CFG: Set preview engine configuration
- * VIDIOC_OMAP3ISP_AEWB_CFG: Set AEWB module configuration
- * VIDIOC_OMAP3ISP_HIST_CFG: Set histogram module configuration
- * VIDIOC_OMAP3ISP_AF_CFG: Set auto-focus module configuration
- * VIDIOC_OMAP3ISP_STAT_REQ: Read statistics (AEWB/AF/histogram) data
- * VIDIOC_OMAP3ISP_STAT_EN: Enable/disable a statistics module
- */
-
-#define VIDIOC_OMAP3ISP_CCDC_CFG \
-	_IOWR('V', BASE_VIDIOC_PRIVATE + 1, struct omap3isp_ccdc_update_config)
-#define VIDIOC_OMAP3ISP_PRV_CFG \
-	_IOWR('V', BASE_VIDIOC_PRIVATE + 2, struct omap3isp_prev_update_config)
-#define VIDIOC_OMAP3ISP_AEWB_CFG \
-	_IOWR('V', BASE_VIDIOC_PRIVATE + 3, struct omap3isp_h3a_aewb_config)
-#define VIDIOC_OMAP3ISP_HIST_CFG \
-	_IOWR('V', BASE_VIDIOC_PRIVATE + 4, struct omap3isp_hist_config)
-#define VIDIOC_OMAP3ISP_AF_CFG \
-	_IOWR('V', BASE_VIDIOC_PRIVATE + 5, struct omap3isp_h3a_af_config)
-#define VIDIOC_OMAP3ISP_STAT_REQ \
-	_IOWR('V', BASE_VIDIOC_PRIVATE + 6, struct omap3isp_stat_data)
-#define VIDIOC_OMAP3ISP_STAT_EN \
-	_IOWR('V', BASE_VIDIOC_PRIVATE + 7, unsigned long)
-
-/*
- * Events
- *
- * V4L2_EVENT_OMAP3ISP_AEWB: AEWB statistics data ready
- * V4L2_EVENT_OMAP3ISP_AF: AF statistics data ready
- * V4L2_EVENT_OMAP3ISP_HIST: Histogram statistics data ready
- */
-
-#define V4L2_EVENT_OMAP3ISP_CLASS	(V4L2_EVENT_PRIVATE_START | 0x100)
-#define V4L2_EVENT_OMAP3ISP_AEWB	(V4L2_EVENT_OMAP3ISP_CLASS | 0x1)
-#define V4L2_EVENT_OMAP3ISP_AF		(V4L2_EVENT_OMAP3ISP_CLASS | 0x2)
-#define V4L2_EVENT_OMAP3ISP_HIST	(V4L2_EVENT_OMAP3ISP_CLASS | 0x3)
-
-struct omap3isp_stat_event_status {
-	__u32 frame_number;
-	__u16 config_counter;
-	__u8 buf_err;
-};
-
-/* AE/AWB related structures and flags*/
-
-/* H3A Range Constants */
-#define OMAP3ISP_AEWB_MAX_SATURATION_LIM	1023
-#define OMAP3ISP_AEWB_MIN_WIN_H			2
-#define OMAP3ISP_AEWB_MAX_WIN_H			256
-#define OMAP3ISP_AEWB_MIN_WIN_W			6
-#define OMAP3ISP_AEWB_MAX_WIN_W			256
-#define OMAP3ISP_AEWB_MIN_WINVC			1
-#define OMAP3ISP_AEWB_MIN_WINHC			1
-#define OMAP3ISP_AEWB_MAX_WINVC			128
-#define OMAP3ISP_AEWB_MAX_WINHC			36
-#define OMAP3ISP_AEWB_MAX_WINSTART		4095
-#define OMAP3ISP_AEWB_MIN_SUB_INC		2
-#define OMAP3ISP_AEWB_MAX_SUB_INC		32
-#define OMAP3ISP_AEWB_MAX_BUF_SIZE		83600
-
-#define OMAP3ISP_AF_IIRSH_MIN			0
-#define OMAP3ISP_AF_IIRSH_MAX			4095
-#define OMAP3ISP_AF_PAXEL_HORIZONTAL_COUNT_MIN	1
-#define OMAP3ISP_AF_PAXEL_HORIZONTAL_COUNT_MAX	36
-#define OMAP3ISP_AF_PAXEL_VERTICAL_COUNT_MIN	1
-#define OMAP3ISP_AF_PAXEL_VERTICAL_COUNT_MAX	128
-#define OMAP3ISP_AF_PAXEL_INCREMENT_MIN		2
-#define OMAP3ISP_AF_PAXEL_INCREMENT_MAX		32
-#define OMAP3ISP_AF_PAXEL_HEIGHT_MIN		2
-#define OMAP3ISP_AF_PAXEL_HEIGHT_MAX		256
-#define OMAP3ISP_AF_PAXEL_WIDTH_MIN		16
-#define OMAP3ISP_AF_PAXEL_WIDTH_MAX		256
-#define OMAP3ISP_AF_PAXEL_HZSTART_MIN		1
-#define OMAP3ISP_AF_PAXEL_HZSTART_MAX		4095
-#define OMAP3ISP_AF_PAXEL_VTSTART_MIN		0
-#define OMAP3ISP_AF_PAXEL_VTSTART_MAX		4095
-#define OMAP3ISP_AF_THRESHOLD_MAX		255
-#define OMAP3ISP_AF_COEF_MAX			4095
-#define OMAP3ISP_AF_PAXEL_SIZE			48
-#define OMAP3ISP_AF_MAX_BUF_SIZE		221184
-
-/**
- * struct omap3isp_h3a_aewb_config - AE AWB configuration reset values
- * saturation_limit: Saturation limit.
- * @win_height: Window Height. Range 2 - 256, even values only.
- * @win_width: Window Width. Range 6 - 256, even values only.
- * @ver_win_count: Vertical Window Count. Range 1 - 128.
- * @hor_win_count: Horizontal Window Count. Range 1 - 36.
- * @ver_win_start: Vertical Window Start. Range 0 - 4095.
- * @hor_win_start: Horizontal Window Start. Range 0 - 4095.
- * @blk_ver_win_start: Black Vertical Windows Start. Range 0 - 4095.
- * @blk_win_height: Black Window Height. Range 2 - 256, even values only.
- * @subsample_ver_inc: Subsample Vertical points increment Range 2 - 32, even
- *                     values only.
- * @subsample_hor_inc: Subsample Horizontal points increment Range 2 - 32, even
- *                     values only.
- * @alaw_enable: AEW ALAW EN flag.
- */
-struct omap3isp_h3a_aewb_config {
-	/*
-	 * Common fields.
-	 * They should be the first ones and must be in the same order as in
-	 * ispstat_generic_config struct.
-	 */
-	__u32 buf_size;
-	__u16 config_counter;
-
-	/* Private fields */
-	__u16 saturation_limit;
-	__u16 win_height;
-	__u16 win_width;
-	__u16 ver_win_count;
-	__u16 hor_win_count;
-	__u16 ver_win_start;
-	__u16 hor_win_start;
-	__u16 blk_ver_win_start;
-	__u16 blk_win_height;
-	__u16 subsample_ver_inc;
-	__u16 subsample_hor_inc;
-	__u8 alaw_enable;
-};
-
-/**
- * struct omap3isp_stat_data - Statistic data sent to or received from user
- * @ts: Timestamp of returned framestats.
- * @buf: Pointer to pass to user.
- * @frame_number: Frame number of requested stats.
- * @cur_frame: Current frame number being processed.
- * @config_counter: Number of the configuration associated with the data.
- */
-struct omap3isp_stat_data {
-	struct timeval ts;
-	void __user *buf;
-	__u32 buf_size;
-	__u16 frame_number;
-	__u16 cur_frame;
-	__u16 config_counter;
-};
-
-
-/* Histogram related structs */
-
-/* Flags for number of bins */
-#define OMAP3ISP_HIST_BINS_32		0
-#define OMAP3ISP_HIST_BINS_64		1
-#define OMAP3ISP_HIST_BINS_128		2
-#define OMAP3ISP_HIST_BINS_256		3
-
-/* Number of bins * 4 colors * 4-bytes word */
-#define OMAP3ISP_HIST_MEM_SIZE_BINS(n)	((1 << ((n)+5))*4*4)
-
-#define OMAP3ISP_HIST_MEM_SIZE		1024
-#define OMAP3ISP_HIST_MIN_REGIONS	1
-#define OMAP3ISP_HIST_MAX_REGIONS	4
-#define OMAP3ISP_HIST_MAX_WB_GAIN	255
-#define OMAP3ISP_HIST_MIN_WB_GAIN	0
-#define OMAP3ISP_HIST_MAX_BIT_WIDTH	14
-#define OMAP3ISP_HIST_MIN_BIT_WIDTH	8
-#define OMAP3ISP_HIST_MAX_WG		4
-#define OMAP3ISP_HIST_MAX_BUF_SIZE	4096
-
-/* Source */
-#define OMAP3ISP_HIST_SOURCE_CCDC	0
-#define OMAP3ISP_HIST_SOURCE_MEM	1
-
-/* CFA pattern */
-#define OMAP3ISP_HIST_CFA_BAYER		0
-#define OMAP3ISP_HIST_CFA_FOVEONX3	1
-
-struct omap3isp_hist_region {
-	__u16 h_start;
-	__u16 h_end;
-	__u16 v_start;
-	__u16 v_end;
-};
-
-struct omap3isp_hist_config {
-	/*
-	 * Common fields.
-	 * They should be the first ones and must be in the same order as in
-	 * ispstat_generic_config struct.
-	 */
-	__u32 buf_size;
-	__u16 config_counter;
-
-	__u8 num_acc_frames;	/* Num of image frames to be processed and
-				   accumulated for each histogram frame */
-	__u16 hist_bins;	/* number of bins: 32, 64, 128, or 256 */
-	__u8 cfa;		/* BAYER or FOVEON X3 */
-	__u8 wg[OMAP3ISP_HIST_MAX_WG];	/* White Balance Gain */
-	__u8 num_regions;	/* number of regions to be configured */
-	struct omap3isp_hist_region region[OMAP3ISP_HIST_MAX_REGIONS];
-};
-
-/* Auto Focus related structs */
-
-#define OMAP3ISP_AF_NUM_COEF		11
-
-enum omap3isp_h3a_af_fvmode {
-	OMAP3ISP_AF_MODE_SUMMED = 0,
-	OMAP3ISP_AF_MODE_PEAK = 1
-};
-
-/* Red, Green, and blue pixel location in the AF windows */
-enum omap3isp_h3a_af_rgbpos {
-	OMAP3ISP_AF_GR_GB_BAYER = 0,	/* GR and GB as Bayer pattern */
-	OMAP3ISP_AF_RG_GB_BAYER = 1,	/* RG and GB as Bayer pattern */
-	OMAP3ISP_AF_GR_BG_BAYER = 2,	/* GR and BG as Bayer pattern */
-	OMAP3ISP_AF_RG_BG_BAYER = 3,	/* RG and BG as Bayer pattern */
-	OMAP3ISP_AF_GG_RB_CUSTOM = 4,	/* GG and RB as custom pattern */
-	OMAP3ISP_AF_RB_GG_CUSTOM = 5	/* RB and GG as custom pattern */
-};
-
-/* Contains the information regarding the Horizontal Median Filter */
-struct omap3isp_h3a_af_hmf {
-	__u8 enable;	/* Status of Horizontal Median Filter */
-	__u8 threshold;	/* Threshold Value for Horizontal Median Filter */
-};
-
-/* Contains the information regarding the IIR Filters */
-struct omap3isp_h3a_af_iir {
-	__u16 h_start;			/* IIR horizontal start */
-	__u16 coeff_set0[OMAP3ISP_AF_NUM_COEF];	/* Filter coefficient, set 0 */
-	__u16 coeff_set1[OMAP3ISP_AF_NUM_COEF];	/* Filter coefficient, set 1 */
-};
-
-/* Contains the information regarding the Paxels Structure in AF Engine */
-struct omap3isp_h3a_af_paxel {
-	__u16 h_start;	/* Horizontal Start Position */
-	__u16 v_start;	/* Vertical Start Position */
-	__u8 width;	/* Width of the Paxel */
-	__u8 height;	/* Height of the Paxel */
-	__u8 h_cnt;	/* Horizontal Count */
-	__u8 v_cnt;	/* vertical Count */
-	__u8 line_inc;	/* Line Increment */
-};
-
-/* Contains the parameters required for hardware set up of AF Engine */
-struct omap3isp_h3a_af_config {
-	/*
-	 * Common fields.
-	 * They should be the first ones and must be in the same order as in
-	 * ispstat_generic_config struct.
-	 */
-	__u32 buf_size;
-	__u16 config_counter;
-
-	struct omap3isp_h3a_af_hmf hmf;		/* HMF configurations */
-	struct omap3isp_h3a_af_iir iir;		/* IIR filter configurations */
-	struct omap3isp_h3a_af_paxel paxel;	/* Paxel parameters */
-	enum omap3isp_h3a_af_rgbpos rgb_pos;	/* RGB Positions */
-	enum omap3isp_h3a_af_fvmode fvmode;	/* Accumulator mode */
-	__u8 alaw_enable;			/* AF ALAW status */
-};
-
-/* ISP CCDC structs */
-
-/* Abstraction layer CCDC configurations */
-#define OMAP3ISP_CCDC_ALAW		(1 << 0)
-#define OMAP3ISP_CCDC_LPF		(1 << 1)
-#define OMAP3ISP_CCDC_BLCLAMP		(1 << 2)
-#define OMAP3ISP_CCDC_BCOMP		(1 << 3)
-#define OMAP3ISP_CCDC_FPC		(1 << 4)
-#define OMAP3ISP_CCDC_CULL		(1 << 5)
-#define OMAP3ISP_CCDC_CONFIG_LSC	(1 << 7)
-#define OMAP3ISP_CCDC_TBL_LSC		(1 << 8)
-
-#define OMAP3ISP_RGB_MAX		3
-
-/* Enumeration constants for Alaw input width */
-enum omap3isp_alaw_ipwidth {
-	OMAP3ISP_ALAW_BIT12_3 = 0x3,
-	OMAP3ISP_ALAW_BIT11_2 = 0x4,
-	OMAP3ISP_ALAW_BIT10_1 = 0x5,
-	OMAP3ISP_ALAW_BIT9_0 = 0x6
-};
-
-/**
- * struct omap3isp_ccdc_lsc_config - LSC configuration
- * @offset: Table Offset of the gain table.
- * @gain_mode_n: Vertical dimension of a paxel in LSC configuration.
- * @gain_mode_m: Horizontal dimension of a paxel in LSC configuration.
- * @gain_format: Gain table format.
- * @fmtsph: Start pixel horizontal from start of the HS sync pulse.
- * @fmtlnh: Number of pixels in horizontal direction to use for the data
- *          reformatter.
- * @fmtslv: Start line from start of VS sync pulse for the data reformatter.
- * @fmtlnv: Number of lines in vertical direction for the data reformatter.
- * @initial_x: X position, in pixels, of the first active pixel in reference
- *             to the first active paxel. Must be an even number.
- * @initial_y: Y position, in pixels, of the first active pixel in reference
- *             to the first active paxel. Must be an even number.
- * @size: Size of LSC gain table. Filled when loaded from userspace.
- */
-struct omap3isp_ccdc_lsc_config {
-	__u16 offset;
-	__u8 gain_mode_n;
-	__u8 gain_mode_m;
-	__u8 gain_format;
-	__u16 fmtsph;
-	__u16 fmtlnh;
-	__u16 fmtslv;
-	__u16 fmtlnv;
-	__u8 initial_x;
-	__u8 initial_y;
-	__u32 size;
-};
-
-/**
- * struct omap3isp_ccdc_bclamp - Optical & Digital black clamp subtract
- * @obgain: Optical black average gain.
- * @obstpixel: Start Pixel w.r.t. HS pulse in Optical black sample.
- * @oblines: Optical Black Sample lines.
- * @oblen: Optical Black Sample Length.
- * @dcsubval: Digital Black Clamp subtract value.
- */
-struct omap3isp_ccdc_bclamp {
-	__u8 obgain;
-	__u8 obstpixel;
-	__u8 oblines;
-	__u8 oblen;
-	__u16 dcsubval;
-};
-
-/**
- * struct omap3isp_ccdc_fpc - Faulty Pixels Correction
- * @fpnum: Number of faulty pixels to be corrected in the frame.
- * @fpcaddr: Memory address of the FPC Table
- */
-struct omap3isp_ccdc_fpc {
-	__u16 fpnum;
-	__u32 fpcaddr;
-};
-
-/**
- * struct omap3isp_ccdc_blcomp - Black Level Compensation parameters
- * @b_mg: B/Mg pixels. 2's complement. -128 to +127.
- * @gb_g: Gb/G pixels. 2's complement. -128 to +127.
- * @gr_cy: Gr/Cy pixels. 2's complement. -128 to +127.
- * @r_ye: R/Ye pixels. 2's complement. -128 to +127.
- */
-struct omap3isp_ccdc_blcomp {
-	__u8 b_mg;
-	__u8 gb_g;
-	__u8 gr_cy;
-	__u8 r_ye;
-};
-
-/**
- * omap3isp_ccdc_culling - Culling parameters
- * @v_pattern: Vertical culling pattern.
- * @h_odd: Horizontal Culling pattern for odd lines.
- * @h_even: Horizontal Culling pattern for even lines.
- */
-struct omap3isp_ccdc_culling {
-	__u8 v_pattern;
-	__u16 h_odd;
-	__u16 h_even;
-};
-
-/**
- * omap3isp_ccdc_update_config - CCDC configuration
- * @update: Specifies which CCDC registers should be updated.
- * @flag: Specifies which CCDC functions should be enabled.
- * @alawip: Enable/Disable A-Law compression.
- * @bclamp: Black clamp control register.
- * @blcomp: Black level compensation value for RGrGbB Pixels. 2's complement.
- * @fpc: Number of faulty pixels corrected in the frame, address of FPC table.
- * @cull: Cull control register.
- * @lsc: Pointer to LSC gain table.
- */
-struct omap3isp_ccdc_update_config {
-	__u16 update;
-	__u16 flag;
-	enum omap3isp_alaw_ipwidth alawip;
-	struct omap3isp_ccdc_bclamp __user *bclamp;
-	struct omap3isp_ccdc_blcomp __user *blcomp;
-	struct omap3isp_ccdc_fpc __user *fpc;
-	struct omap3isp_ccdc_lsc_config __user *lsc_cfg;
-	struct omap3isp_ccdc_culling __user *cull;
-	__u8 __user *lsc;
-};
-
-/* Preview configurations */
-#define OMAP3ISP_PREV_LUMAENH		(1 << 0)
-#define OMAP3ISP_PREV_INVALAW		(1 << 1)
-#define OMAP3ISP_PREV_HRZ_MED		(1 << 2)
-#define OMAP3ISP_PREV_CFA		(1 << 3)
-#define OMAP3ISP_PREV_CHROMA_SUPP	(1 << 4)
-#define OMAP3ISP_PREV_WB		(1 << 5)
-#define OMAP3ISP_PREV_BLKADJ		(1 << 6)
-#define OMAP3ISP_PREV_RGB2RGB		(1 << 7)
-#define OMAP3ISP_PREV_COLOR_CONV	(1 << 8)
-#define OMAP3ISP_PREV_YC_LIMIT		(1 << 9)
-#define OMAP3ISP_PREV_DEFECT_COR	(1 << 10)
-#define OMAP3ISP_PREV_GAMMABYPASS	(1 << 11)
-#define OMAP3ISP_PREV_DRK_FRM_CAPTURE	(1 << 12)
-#define OMAP3ISP_PREV_DRK_FRM_SUBTRACT	(1 << 13)
-#define OMAP3ISP_PREV_LENS_SHADING	(1 << 14)
-#define OMAP3ISP_PREV_NF		(1 << 15)
-#define OMAP3ISP_PREV_GAMMA		(1 << 16)
-
-#define OMAP3ISP_PREV_NF_TBL_SIZE	64
-#define OMAP3ISP_PREV_CFA_TBL_SIZE	576
-#define OMAP3ISP_PREV_GAMMA_TBL_SIZE	1024
-#define OMAP3ISP_PREV_YENH_TBL_SIZE	128
-
-#define OMAP3ISP_PREV_DETECT_CORRECT_CHANNELS	4
-
-/**
- * struct omap3isp_prev_hmed - Horizontal Median Filter
- * @odddist: Distance between consecutive pixels of same color in the odd line.
- * @evendist: Distance between consecutive pixels of same color in the even
- *            line.
- * @thres: Horizontal median filter threshold.
- */
-struct omap3isp_prev_hmed {
-	__u8 odddist;
-	__u8 evendist;
-	__u8 thres;
-};
-
-/*
- * Enumeration for CFA Formats supported by preview
- */
-enum omap3isp_cfa_fmt {
-	OMAP3ISP_CFAFMT_BAYER,
-	OMAP3ISP_CFAFMT_SONYVGA,
-	OMAP3ISP_CFAFMT_RGBFOVEON,
-	OMAP3ISP_CFAFMT_DNSPL,
-	OMAP3ISP_CFAFMT_HONEYCOMB,
-	OMAP3ISP_CFAFMT_RRGGBBFOVEON
-};
-
-/**
- * struct omap3isp_prev_cfa - CFA Interpolation
- * @format: CFA Format Enum value supported by preview.
- * @gradthrs_vert: CFA Gradient Threshold - Vertical.
- * @gradthrs_horz: CFA Gradient Threshold - Horizontal.
- * @table: Pointer to the CFA table.
- */
-struct omap3isp_prev_cfa {
-	enum omap3isp_cfa_fmt format;
-	__u8 gradthrs_vert;
-	__u8 gradthrs_horz;
-	__u32 table[OMAP3ISP_PREV_CFA_TBL_SIZE];
-};
-
-/**
- * struct omap3isp_prev_csup - Chrominance Suppression
- * @gain: Gain.
- * @thres: Threshold.
- * @hypf_en: Flag to enable/disable the High Pass Filter.
- */
-struct omap3isp_prev_csup {
-	__u8 gain;
-	__u8 thres;
-	__u8 hypf_en;
-};
-
-/**
- * struct omap3isp_prev_wbal - White Balance
- * @dgain: Digital gain (U10Q8).
- * @coef3: White balance gain - COEF 3 (U8Q5).
- * @coef2: White balance gain - COEF 2 (U8Q5).
- * @coef1: White balance gain - COEF 1 (U8Q5).
- * @coef0: White balance gain - COEF 0 (U8Q5).
- */
-struct omap3isp_prev_wbal {
-	__u16 dgain;
-	__u8 coef3;
-	__u8 coef2;
-	__u8 coef1;
-	__u8 coef0;
-};
-
-/**
- * struct omap3isp_prev_blkadj - Black Level Adjustment
- * @red: Black level offset adjustment for Red in 2's complement format
- * @green: Black level offset adjustment for Green in 2's complement format
- * @blue: Black level offset adjustment for Blue in 2's complement format
- */
-struct omap3isp_prev_blkadj {
-	/*Black level offset adjustment for Red in 2's complement format */
-	__u8 red;
-	/*Black level offset adjustment for Green in 2's complement format */
-	__u8 green;
-	/* Black level offset adjustment for Blue in 2's complement format */
-	__u8 blue;
-};
-
-/**
- * struct omap3isp_prev_rgbtorgb - RGB to RGB Blending
- * @matrix: Blending values(S12Q8 format)
- *              [RR] [GR] [BR]
- *              [RG] [GG] [BG]
- *              [RB] [GB] [BB]
- * @offset: Blending offset value for R,G,B in 2's complement integer format.
- */
-struct omap3isp_prev_rgbtorgb {
-	__u16 matrix[OMAP3ISP_RGB_MAX][OMAP3ISP_RGB_MAX];
-	__u16 offset[OMAP3ISP_RGB_MAX];
-};
-
-/**
- * struct omap3isp_prev_csc - Color Space Conversion from RGB-YCbYCr
- * @matrix: Color space conversion coefficients(S10Q8)
- *              [CSCRY]  [CSCGY]  [CSCBY]
- *              [CSCRCB] [CSCGCB] [CSCBCB]
- *              [CSCRCR] [CSCGCR] [CSCBCR]
- * @offset: CSC offset values for Y offset, CB offset and CR offset respectively
- */
-struct omap3isp_prev_csc {
-	__u16 matrix[OMAP3ISP_RGB_MAX][OMAP3ISP_RGB_MAX];
-	__s16 offset[OMAP3ISP_RGB_MAX];
-};
-
-/**
- * struct omap3isp_prev_yclimit - Y, C Value Limit
- * @minC: Minimum C value
- * @maxC: Maximum C value
- * @minY: Minimum Y value
- * @maxY: Maximum Y value
- */
-struct omap3isp_prev_yclimit {
-	__u8 minC;
-	__u8 maxC;
-	__u8 minY;
-	__u8 maxY;
-};
-
-/**
- * struct omap3isp_prev_dcor - Defect correction
- * @couplet_mode_en: Flag to enable or disable the couplet dc Correction in NF
- * @detect_correct: Thresholds for correction bit 0:10 detect 16:25 correct
- */
-struct omap3isp_prev_dcor {
-	__u8 couplet_mode_en;
-	__u32 detect_correct[OMAP3ISP_PREV_DETECT_CORRECT_CHANNELS];
-};
-
-/**
- * struct omap3isp_prev_nf - Noise Filter
- * @spread: Spread value to be used in Noise Filter
- * @table: Pointer to the Noise Filter table
- */
-struct omap3isp_prev_nf {
-	__u8 spread;
-	__u32 table[OMAP3ISP_PREV_NF_TBL_SIZE];
-};
-
-/**
- * struct omap3isp_prev_gtables - Gamma correction tables
- * @red: Array for red gamma table.
- * @green: Array for green gamma table.
- * @blue: Array for blue gamma table.
- */
-struct omap3isp_prev_gtables {
-	__u32 red[OMAP3ISP_PREV_GAMMA_TBL_SIZE];
-	__u32 green[OMAP3ISP_PREV_GAMMA_TBL_SIZE];
-	__u32 blue[OMAP3ISP_PREV_GAMMA_TBL_SIZE];
-};
-
-/**
- * struct omap3isp_prev_luma - Luma enhancement
- * @table: Array for luma enhancement table.
- */
-struct omap3isp_prev_luma {
-	__u32 table[OMAP3ISP_PREV_YENH_TBL_SIZE];
-};
-
-/**
- * struct omap3isp_prev_update_config - Preview engine configuration (user)
- * @update: Specifies which ISP Preview registers should be updated.
- * @flag: Specifies which ISP Preview functions should be enabled.
- * @shading_shift: 3bit value of shift used in shading compensation.
- * @luma: Pointer to luma enhancement structure.
- * @hmed: Pointer to structure containing the odd and even distance.
- *        between the pixels in the image along with the filter threshold.
- * @cfa: Pointer to structure containing the CFA interpolation table, CFA.
- *       format in the image, vertical and horizontal gradient threshold.
- * @csup: Pointer to Structure for Chrominance Suppression coefficients.
- * @wbal: Pointer to structure for White Balance.
- * @blkadj: Pointer to structure for Black Adjustment.
- * @rgb2rgb: Pointer to structure for RGB to RGB Blending.
- * @csc: Pointer to structure for Color Space Conversion from RGB-YCbYCr.
- * @yclimit: Pointer to structure for Y, C Value Limit.
- * @dcor: Pointer to structure for defect correction.
- * @nf: Pointer to structure for Noise Filter
- * @gamma: Pointer to gamma structure.
- */
-struct omap3isp_prev_update_config {
-	__u32 update;
-	__u32 flag;
-	__u32 shading_shift;
-	struct omap3isp_prev_luma __user *luma;
-	struct omap3isp_prev_hmed __user *hmed;
-	struct omap3isp_prev_cfa __user *cfa;
-	struct omap3isp_prev_csup __user *csup;
-	struct omap3isp_prev_wbal __user *wbal;
-	struct omap3isp_prev_blkadj __user *blkadj;
-	struct omap3isp_prev_rgbtorgb __user *rgb2rgb;
-	struct omap3isp_prev_csc __user *csc;
-	struct omap3isp_prev_yclimit __user *yclimit;
-	struct omap3isp_prev_dcor __user *dcor;
-	struct omap3isp_prev_nf __user *nf;
-	struct omap3isp_prev_gtables __user *gamma;
-};
-
-#endif	/* OMAP3_ISP_USER_H */
diff --git a/ANDROID_3.4.5/include/linux/omapfb.h b/ANDROID_3.4.5/include/linux/omapfb.h
deleted file mode 100644
index 4ff57e81..00000000
--- a/ANDROID_3.4.5/include/linux/omapfb.h
+++ /dev/null
@@ -1,233 +0,0 @@
-/*
- * File: include/linux/omapfb.h
- *
- * Framebuffer driver for TI OMAP boards
- *
- * Copyright (C) 2004 Nokia Corporation
- * Author: Imre Deak <imre.deak@nokia.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- */
-
-#ifndef __LINUX_OMAPFB_H__
-#define __LINUX_OMAPFB_H__
-
-#include <linux/fb.h>
-#include <linux/ioctl.h>
-#include <linux/types.h>
-
-/* IOCTL commands. */
-
-#define OMAP_IOW(num, dtype)	_IOW('O', num, dtype)
-#define OMAP_IOR(num, dtype)	_IOR('O', num, dtype)
-#define OMAP_IOWR(num, dtype)	_IOWR('O', num, dtype)
-#define OMAP_IO(num)		_IO('O', num)
-
-#define OMAPFB_MIRROR		OMAP_IOW(31, int)
-#define OMAPFB_SYNC_GFX		OMAP_IO(37)
-#define OMAPFB_VSYNC		OMAP_IO(38)
-#define OMAPFB_SET_UPDATE_MODE	OMAP_IOW(40, int)
-#define OMAPFB_GET_CAPS		OMAP_IOR(42, struct omapfb_caps)
-#define OMAPFB_GET_UPDATE_MODE	OMAP_IOW(43, int)
-#define OMAPFB_LCD_TEST		OMAP_IOW(45, int)
-#define OMAPFB_CTRL_TEST	OMAP_IOW(46, int)
-#define OMAPFB_UPDATE_WINDOW_OLD OMAP_IOW(47, struct omapfb_update_window_old)
-#define OMAPFB_SET_COLOR_KEY	OMAP_IOW(50, struct omapfb_color_key)
-#define OMAPFB_GET_COLOR_KEY	OMAP_IOW(51, struct omapfb_color_key)
-#define OMAPFB_SETUP_PLANE	OMAP_IOW(52, struct omapfb_plane_info)
-#define OMAPFB_QUERY_PLANE	OMAP_IOW(53, struct omapfb_plane_info)
-#define OMAPFB_UPDATE_WINDOW	OMAP_IOW(54, struct omapfb_update_window)
-#define OMAPFB_SETUP_MEM	OMAP_IOW(55, struct omapfb_mem_info)
-#define OMAPFB_QUERY_MEM	OMAP_IOW(56, struct omapfb_mem_info)
-#define OMAPFB_WAITFORVSYNC	OMAP_IO(57)
-#define OMAPFB_MEMORY_READ	OMAP_IOR(58, struct omapfb_memory_read)
-#define OMAPFB_GET_OVERLAY_COLORMODE OMAP_IOR(59, struct omapfb_ovl_colormode)
-#define OMAPFB_WAITFORGO	OMAP_IO(60)
-#define OMAPFB_GET_VRAM_INFO	OMAP_IOR(61, struct omapfb_vram_info)
-#define OMAPFB_SET_TEARSYNC	OMAP_IOW(62, struct omapfb_tearsync_info)
-#define OMAPFB_GET_DISPLAY_INFO	OMAP_IOR(63, struct omapfb_display_info)
-
-#define OMAPFB_CAPS_GENERIC_MASK	0x00000fff
-#define OMAPFB_CAPS_LCDC_MASK		0x00fff000
-#define OMAPFB_CAPS_PANEL_MASK		0xff000000
-
-#define OMAPFB_CAPS_MANUAL_UPDATE	0x00001000
-#define OMAPFB_CAPS_TEARSYNC		0x00002000
-#define OMAPFB_CAPS_PLANE_RELOCATE_MEM	0x00004000
-#define OMAPFB_CAPS_PLANE_SCALE		0x00008000
-#define OMAPFB_CAPS_WINDOW_PIXEL_DOUBLE	0x00010000
-#define OMAPFB_CAPS_WINDOW_SCALE	0x00020000
-#define OMAPFB_CAPS_WINDOW_OVERLAY	0x00040000
-#define OMAPFB_CAPS_WINDOW_ROTATE	0x00080000
-#define OMAPFB_CAPS_SET_BACKLIGHT	0x01000000
-
-/* Values from DSP must map to lower 16-bits */
-#define OMAPFB_FORMAT_MASK		0x00ff
-#define OMAPFB_FORMAT_FLAG_DOUBLE	0x0100
-#define OMAPFB_FORMAT_FLAG_TEARSYNC	0x0200
-#define OMAPFB_FORMAT_FLAG_FORCE_VSYNC	0x0400
-#define OMAPFB_FORMAT_FLAG_ENABLE_OVERLAY	0x0800
-#define OMAPFB_FORMAT_FLAG_DISABLE_OVERLAY	0x1000
-
-#define OMAPFB_MEMTYPE_SDRAM		0
-#define OMAPFB_MEMTYPE_SRAM		1
-#define OMAPFB_MEMTYPE_MAX		1
-
-#define OMAPFB_MEM_IDX_ENABLED	0x80
-#define OMAPFB_MEM_IDX_MASK	0x7f
-
-enum omapfb_color_format {
-	OMAPFB_COLOR_RGB565 = 0,
-	OMAPFB_COLOR_YUV422,
-	OMAPFB_COLOR_YUV420,
-	OMAPFB_COLOR_CLUT_8BPP,
-	OMAPFB_COLOR_CLUT_4BPP,
-	OMAPFB_COLOR_CLUT_2BPP,
-	OMAPFB_COLOR_CLUT_1BPP,
-	OMAPFB_COLOR_RGB444,
-	OMAPFB_COLOR_YUY422,
-
-	OMAPFB_COLOR_ARGB16,
-	OMAPFB_COLOR_RGB24U,	/* RGB24, 32-bit container */
-	OMAPFB_COLOR_RGB24P,	/* RGB24, 24-bit container */
-	OMAPFB_COLOR_ARGB32,
-	OMAPFB_COLOR_RGBA32,
-	OMAPFB_COLOR_RGBX32,
-};
-
-struct omapfb_update_window {
-	__u32 x, y;
-	__u32 width, height;
-	__u32 format;
-	__u32 out_x, out_y;
-	__u32 out_width, out_height;
-	__u32 reserved[8];
-};
-
-struct omapfb_update_window_old {
-	__u32 x, y;
-	__u32 width, height;
-	__u32 format;
-};
-
-enum omapfb_plane {
-	OMAPFB_PLANE_GFX = 0,
-	OMAPFB_PLANE_VID1,
-	OMAPFB_PLANE_VID2,
-};
-
-enum omapfb_channel_out {
-	OMAPFB_CHANNEL_OUT_LCD = 0,
-	OMAPFB_CHANNEL_OUT_DIGIT,
-};
-
-struct omapfb_plane_info {
-	__u32 pos_x;
-	__u32 pos_y;
-	__u8  enabled;
-	__u8  channel_out;
-	__u8  mirror;
-	__u8  mem_idx;
-	__u32 out_width;
-	__u32 out_height;
-	__u32 reserved2[12];
-};
-
-struct omapfb_mem_info {
-	__u32 size;
-	__u8  type;
-	__u8  reserved[3];
-};
-
-struct omapfb_caps {
-	__u32 ctrl;
-	__u32 plane_color;
-	__u32 wnd_color;
-};
-
-enum omapfb_color_key_type {
-	OMAPFB_COLOR_KEY_DISABLED = 0,
-	OMAPFB_COLOR_KEY_GFX_DST,
-	OMAPFB_COLOR_KEY_VID_SRC,
-};
-
-struct omapfb_color_key {
-	__u8  channel_out;
-	__u32 background;
-	__u32 trans_key;
-	__u8  key_type;
-};
-
-enum omapfb_update_mode {
-	OMAPFB_UPDATE_DISABLED = 0,
-	OMAPFB_AUTO_UPDATE,
-	OMAPFB_MANUAL_UPDATE
-};
-
-struct omapfb_memory_read {
-	__u16 x;
-	__u16 y;
-	__u16 w;
-	__u16 h;
-	size_t buffer_size;
-	void __user *buffer;
-};
-
-struct omapfb_ovl_colormode {
-	__u8 overlay_idx;
-	__u8 mode_idx;
-	__u32 bits_per_pixel;
-	__u32 nonstd;
-	struct fb_bitfield red;
-	struct fb_bitfield green;
-	struct fb_bitfield blue;
-	struct fb_bitfield transp;
-};
-
-struct omapfb_vram_info {
-	__u32 total;
-	__u32 free;
-	__u32 largest_free_block;
-	__u32 reserved[5];
-};
-
-struct omapfb_tearsync_info {
-	__u8 enabled;
-	__u8 reserved1[3];
-	__u16 line;
-	__u16 reserved2;
-};
-
-struct omapfb_display_info {
-	__u16 xres;
-	__u16 yres;
-	__u32 width;	/* phys width of the display in micrometers */
-	__u32 height;	/* phys height of the display in micrometers */
-	__u32 reserved[5];
-};
-
-#ifdef __KERNEL__
-
-#include <plat/board.h>
-
-struct omapfb_platform_data {
-	struct omap_lcd_config		lcd;
-};
-
-void __init omapfb_set_lcd_config(const struct omap_lcd_config *config);
-
-#endif
-
-#endif /* __OMAPFB_H */
diff --git a/ANDROID_3.4.5/include/linux/oom.h b/ANDROID_3.4.5/include/linux/oom.h
deleted file mode 100644
index 3d764753..00000000
--- a/ANDROID_3.4.5/include/linux/oom.h
+++ /dev/null
@@ -1,75 +0,0 @@
-#ifndef __INCLUDE_LINUX_OOM_H
-#define __INCLUDE_LINUX_OOM_H
-
-/*
- * /proc/<pid>/oom_adj is deprecated, see
- * Documentation/feature-removal-schedule.txt.
- *
- * /proc/<pid>/oom_adj set to -17 protects from the oom-killer
- */
-#define OOM_DISABLE (-17)
-/* inclusive */
-#define OOM_ADJUST_MIN (-16)
-#define OOM_ADJUST_MAX 15
-
-/*
- * /proc/<pid>/oom_score_adj set to OOM_SCORE_ADJ_MIN disables oom killing for
- * pid.
- */
-#define OOM_SCORE_ADJ_MIN	(-1000)
-#define OOM_SCORE_ADJ_MAX	1000
-
-#ifdef __KERNEL__
-
-#include <linux/sched.h>
-#include <linux/types.h>
-#include <linux/nodemask.h>
-
-struct zonelist;
-struct notifier_block;
-struct mem_cgroup;
-struct task_struct;
-
-/*
- * Types of limitations to the nodes from which allocations may occur
- */
-enum oom_constraint {
-	CONSTRAINT_NONE,
-	CONSTRAINT_CPUSET,
-	CONSTRAINT_MEMORY_POLICY,
-	CONSTRAINT_MEMCG,
-};
-
-extern void compare_swap_oom_score_adj(int old_val, int new_val);
-extern int test_set_oom_score_adj(int new_val);
-
-extern unsigned int oom_badness(struct task_struct *p, struct mem_cgroup *memcg,
-			const nodemask_t *nodemask, unsigned long totalpages);
-extern int try_set_zonelist_oom(struct zonelist *zonelist, gfp_t gfp_flags);
-extern void clear_zonelist_oom(struct zonelist *zonelist, gfp_t gfp_flags);
-
-extern void out_of_memory(struct zonelist *zonelist, gfp_t gfp_mask,
-		int order, nodemask_t *mask, bool force_kill);
-extern int register_oom_notifier(struct notifier_block *nb);
-extern int unregister_oom_notifier(struct notifier_block *nb);
-
-extern bool oom_killer_disabled;
-
-static inline void oom_killer_disable(void)
-{
-	oom_killer_disabled = true;
-}
-
-static inline void oom_killer_enable(void)
-{
-	oom_killer_disabled = false;
-}
-
-extern struct task_struct *find_lock_task_mm(struct task_struct *p);
-
-/* sysctls */
-extern int sysctl_oom_dump_tasks;
-extern int sysctl_oom_kill_allocating_task;
-extern int sysctl_panic_on_oom;
-#endif /* __KERNEL__*/
-#endif /* _INCLUDE_LINUX_OOM_H */
diff --git a/ANDROID_3.4.5/include/linux/openvswitch.h b/ANDROID_3.4.5/include/linux/openvswitch.h
deleted file mode 100644
index eb1efa54..00000000
--- a/ANDROID_3.4.5/include/linux/openvswitch.h
+++ /dev/null
@@ -1,452 +0,0 @@
-/*
- * Copyright (c) 2007-2011 Nicira Networks.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of version 2 of the GNU General Public
- * License as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA
- */
-
-#ifndef _LINUX_OPENVSWITCH_H
-#define _LINUX_OPENVSWITCH_H 1
-
-#include <linux/types.h>
-
-/**
- * struct ovs_header - header for OVS Generic Netlink messages.
- * @dp_ifindex: ifindex of local port for datapath (0 to make a request not
- * specific to a datapath).
- *
- * Attributes following the header are specific to a particular OVS Generic
- * Netlink family, but all of the OVS families use this header.
- */
-
-struct ovs_header {
-	int dp_ifindex;
-};
-
-/* Datapaths. */
-
-#define OVS_DATAPATH_FAMILY  "ovs_datapath"
-#define OVS_DATAPATH_MCGROUP "ovs_datapath"
-#define OVS_DATAPATH_VERSION 0x1
-
-enum ovs_datapath_cmd {
-	OVS_DP_CMD_UNSPEC,
-	OVS_DP_CMD_NEW,
-	OVS_DP_CMD_DEL,
-	OVS_DP_CMD_GET,
-	OVS_DP_CMD_SET
-};
-
-/**
- * enum ovs_datapath_attr - attributes for %OVS_DP_* commands.
- * @OVS_DP_ATTR_NAME: Name of the network device that serves as the "local
- * port".  This is the name of the network device whose dp_ifindex is given in
- * the &struct ovs_header.  Always present in notifications.  Required in
- * %OVS_DP_NEW requests.  May be used as an alternative to specifying
- * dp_ifindex in other requests (with a dp_ifindex of 0).
- * @OVS_DP_ATTR_UPCALL_PID: The Netlink socket in userspace that is initially
- * set on the datapath port (for OVS_ACTION_ATTR_MISS).  Only valid on
- * %OVS_DP_CMD_NEW requests. A value of zero indicates that upcalls should
- * not be sent.
- * @OVS_DP_ATTR_STATS: Statistics about packets that have passed through the
- * datapath.  Always present in notifications.
- *
- * These attributes follow the &struct ovs_header within the Generic Netlink
- * payload for %OVS_DP_* commands.
- */
-enum ovs_datapath_attr {
-	OVS_DP_ATTR_UNSPEC,
-	OVS_DP_ATTR_NAME,       /* name of dp_ifindex netdev */
-	OVS_DP_ATTR_UPCALL_PID, /* Netlink PID to receive upcalls */
-	OVS_DP_ATTR_STATS,      /* struct ovs_dp_stats */
-	__OVS_DP_ATTR_MAX
-};
-
-#define OVS_DP_ATTR_MAX (__OVS_DP_ATTR_MAX - 1)
-
-struct ovs_dp_stats {
-	__u64 n_hit;             /* Number of flow table matches. */
-	__u64 n_missed;          /* Number of flow table misses. */
-	__u64 n_lost;            /* Number of misses not sent to userspace. */
-	__u64 n_flows;           /* Number of flows present */
-};
-
-struct ovs_vport_stats {
-	__u64   rx_packets;		/* total packets received       */
-	__u64   tx_packets;		/* total packets transmitted    */
-	__u64   rx_bytes;		/* total bytes received         */
-	__u64   tx_bytes;		/* total bytes transmitted      */
-	__u64   rx_errors;		/* bad packets received         */
-	__u64   tx_errors;		/* packet transmit problems     */
-	__u64   rx_dropped;		/* no space in linux buffers    */
-	__u64   tx_dropped;		/* no space available in linux  */
-};
-
-/* Fixed logical ports. */
-#define OVSP_LOCAL      ((__u16)0)
-
-/* Packet transfer. */
-
-#define OVS_PACKET_FAMILY "ovs_packet"
-#define OVS_PACKET_VERSION 0x1
-
-enum ovs_packet_cmd {
-	OVS_PACKET_CMD_UNSPEC,
-
-	/* Kernel-to-user notifications. */
-	OVS_PACKET_CMD_MISS,    /* Flow table miss. */
-	OVS_PACKET_CMD_ACTION,  /* OVS_ACTION_ATTR_USERSPACE action. */
-
-	/* Userspace commands. */
-	OVS_PACKET_CMD_EXECUTE  /* Apply actions to a packet. */
-};
-
-/**
- * enum ovs_packet_attr - attributes for %OVS_PACKET_* commands.
- * @OVS_PACKET_ATTR_PACKET: Present for all notifications.  Contains the entire
- * packet as received, from the start of the Ethernet header onward.  For
- * %OVS_PACKET_CMD_ACTION, %OVS_PACKET_ATTR_PACKET reflects changes made by
- * actions preceding %OVS_ACTION_ATTR_USERSPACE, but %OVS_PACKET_ATTR_KEY is
- * the flow key extracted from the packet as originally received.
- * @OVS_PACKET_ATTR_KEY: Present for all notifications.  Contains the flow key
- * extracted from the packet as nested %OVS_KEY_ATTR_* attributes.  This allows
- * userspace to adapt its flow setup strategy by comparing its notion of the
- * flow key against the kernel's.
- * @OVS_PACKET_ATTR_ACTIONS: Contains actions for the packet.  Used
- * for %OVS_PACKET_CMD_EXECUTE.  It has nested %OVS_ACTION_ATTR_* attributes.
- * @OVS_PACKET_ATTR_USERDATA: Present for an %OVS_PACKET_CMD_ACTION
- * notification if the %OVS_ACTION_ATTR_USERSPACE action specified an
- * %OVS_USERSPACE_ATTR_USERDATA attribute.
- *
- * These attributes follow the &struct ovs_header within the Generic Netlink
- * payload for %OVS_PACKET_* commands.
- */
-enum ovs_packet_attr {
-	OVS_PACKET_ATTR_UNSPEC,
-	OVS_PACKET_ATTR_PACKET,      /* Packet data. */
-	OVS_PACKET_ATTR_KEY,         /* Nested OVS_KEY_ATTR_* attributes. */
-	OVS_PACKET_ATTR_ACTIONS,     /* Nested OVS_ACTION_ATTR_* attributes. */
-	OVS_PACKET_ATTR_USERDATA,    /* u64 OVS_ACTION_ATTR_USERSPACE arg. */
-	__OVS_PACKET_ATTR_MAX
-};
-
-#define OVS_PACKET_ATTR_MAX (__OVS_PACKET_ATTR_MAX - 1)
-
-/* Virtual ports. */
-
-#define OVS_VPORT_FAMILY  "ovs_vport"
-#define OVS_VPORT_MCGROUP "ovs_vport"
-#define OVS_VPORT_VERSION 0x1
-
-enum ovs_vport_cmd {
-	OVS_VPORT_CMD_UNSPEC,
-	OVS_VPORT_CMD_NEW,
-	OVS_VPORT_CMD_DEL,
-	OVS_VPORT_CMD_GET,
-	OVS_VPORT_CMD_SET
-};
-
-enum ovs_vport_type {
-	OVS_VPORT_TYPE_UNSPEC,
-	OVS_VPORT_TYPE_NETDEV,   /* network device */
-	OVS_VPORT_TYPE_INTERNAL, /* network device implemented by datapath */
-	__OVS_VPORT_TYPE_MAX
-};
-
-#define OVS_VPORT_TYPE_MAX (__OVS_VPORT_TYPE_MAX - 1)
-
-/**
- * enum ovs_vport_attr - attributes for %OVS_VPORT_* commands.
- * @OVS_VPORT_ATTR_PORT_NO: 32-bit port number within datapath.
- * @OVS_VPORT_ATTR_TYPE: 32-bit %OVS_VPORT_TYPE_* constant describing the type
- * of vport.
- * @OVS_VPORT_ATTR_NAME: Name of vport.  For a vport based on a network device
- * this is the name of the network device.  Maximum length %IFNAMSIZ-1 bytes
- * plus a null terminator.
- * @OVS_VPORT_ATTR_OPTIONS: Vport-specific configuration information.
- * @OVS_VPORT_ATTR_UPCALL_PID: The Netlink socket in userspace that
- * OVS_PACKET_CMD_MISS upcalls will be directed to for packets received on
- * this port.  A value of zero indicates that upcalls should not be sent.
- * @OVS_VPORT_ATTR_STATS: A &struct ovs_vport_stats giving statistics for
- * packets sent or received through the vport.
- *
- * These attributes follow the &struct ovs_header within the Generic Netlink
- * payload for %OVS_VPORT_* commands.
- *
- * For %OVS_VPORT_CMD_NEW requests, the %OVS_VPORT_ATTR_TYPE and
- * %OVS_VPORT_ATTR_NAME attributes are required.  %OVS_VPORT_ATTR_PORT_NO is
- * optional; if not specified a free port number is automatically selected.
- * Whether %OVS_VPORT_ATTR_OPTIONS is required or optional depends on the type
- * of vport.
- * and other attributes are ignored.
- *
- * For other requests, if %OVS_VPORT_ATTR_NAME is specified then it is used to
- * look up the vport to operate on; otherwise dp_idx from the &struct
- * ovs_header plus %OVS_VPORT_ATTR_PORT_NO determine the vport.
- */
-enum ovs_vport_attr {
-	OVS_VPORT_ATTR_UNSPEC,
-	OVS_VPORT_ATTR_PORT_NO,	/* u32 port number within datapath */
-	OVS_VPORT_ATTR_TYPE,	/* u32 OVS_VPORT_TYPE_* constant. */
-	OVS_VPORT_ATTR_NAME,	/* string name, up to IFNAMSIZ bytes long */
-	OVS_VPORT_ATTR_OPTIONS, /* nested attributes, varies by vport type */
-	OVS_VPORT_ATTR_UPCALL_PID, /* u32 Netlink PID to receive upcalls */
-	OVS_VPORT_ATTR_STATS,	/* struct ovs_vport_stats */
-	__OVS_VPORT_ATTR_MAX
-};
-
-#define OVS_VPORT_ATTR_MAX (__OVS_VPORT_ATTR_MAX - 1)
-
-/* Flows. */
-
-#define OVS_FLOW_FAMILY  "ovs_flow"
-#define OVS_FLOW_MCGROUP "ovs_flow"
-#define OVS_FLOW_VERSION 0x1
-
-enum ovs_flow_cmd {
-	OVS_FLOW_CMD_UNSPEC,
-	OVS_FLOW_CMD_NEW,
-	OVS_FLOW_CMD_DEL,
-	OVS_FLOW_CMD_GET,
-	OVS_FLOW_CMD_SET
-};
-
-struct ovs_flow_stats {
-	__u64 n_packets;         /* Number of matched packets. */
-	__u64 n_bytes;           /* Number of matched bytes. */
-};
-
-enum ovs_key_attr {
-	OVS_KEY_ATTR_UNSPEC,
-	OVS_KEY_ATTR_ENCAP,	/* Nested set of encapsulated attributes. */
-	OVS_KEY_ATTR_PRIORITY,  /* u32 skb->priority */
-	OVS_KEY_ATTR_IN_PORT,   /* u32 OVS dp port number */
-	OVS_KEY_ATTR_ETHERNET,  /* struct ovs_key_ethernet */
-	OVS_KEY_ATTR_VLAN,	/* be16 VLAN TCI */
-	OVS_KEY_ATTR_ETHERTYPE,	/* be16 Ethernet type */
-	OVS_KEY_ATTR_IPV4,      /* struct ovs_key_ipv4 */
-	OVS_KEY_ATTR_IPV6,      /* struct ovs_key_ipv6 */
-	OVS_KEY_ATTR_TCP,       /* struct ovs_key_tcp */
-	OVS_KEY_ATTR_UDP,       /* struct ovs_key_udp */
-	OVS_KEY_ATTR_ICMP,      /* struct ovs_key_icmp */
-	OVS_KEY_ATTR_ICMPV6,    /* struct ovs_key_icmpv6 */
-	OVS_KEY_ATTR_ARP,       /* struct ovs_key_arp */
-	OVS_KEY_ATTR_ND,        /* struct ovs_key_nd */
-	__OVS_KEY_ATTR_MAX
-};
-
-#define OVS_KEY_ATTR_MAX (__OVS_KEY_ATTR_MAX - 1)
-
-/**
- * enum ovs_frag_type - IPv4 and IPv6 fragment type
- * @OVS_FRAG_TYPE_NONE: Packet is not a fragment.
- * @OVS_FRAG_TYPE_FIRST: Packet is a fragment with offset 0.
- * @OVS_FRAG_TYPE_LATER: Packet is a fragment with nonzero offset.
- *
- * Used as the @ipv4_frag in &struct ovs_key_ipv4 and as @ipv6_frag &struct
- * ovs_key_ipv6.
- */
-enum ovs_frag_type {
-	OVS_FRAG_TYPE_NONE,
-	OVS_FRAG_TYPE_FIRST,
-	OVS_FRAG_TYPE_LATER,
-	__OVS_FRAG_TYPE_MAX
-};
-
-#define OVS_FRAG_TYPE_MAX (__OVS_FRAG_TYPE_MAX - 1)
-
-struct ovs_key_ethernet {
-	__u8	 eth_src[6];
-	__u8	 eth_dst[6];
-};
-
-struct ovs_key_ipv4 {
-	__be32 ipv4_src;
-	__be32 ipv4_dst;
-	__u8   ipv4_proto;
-	__u8   ipv4_tos;
-	__u8   ipv4_ttl;
-	__u8   ipv4_frag;	/* One of OVS_FRAG_TYPE_*. */
-};
-
-struct ovs_key_ipv6 {
-	__be32 ipv6_src[4];
-	__be32 ipv6_dst[4];
-	__be32 ipv6_label;	/* 20-bits in least-significant bits. */
-	__u8   ipv6_proto;
-	__u8   ipv6_tclass;
-	__u8   ipv6_hlimit;
-	__u8   ipv6_frag;	/* One of OVS_FRAG_TYPE_*. */
-};
-
-struct ovs_key_tcp {
-	__be16 tcp_src;
-	__be16 tcp_dst;
-};
-
-struct ovs_key_udp {
-	__be16 udp_src;
-	__be16 udp_dst;
-};
-
-struct ovs_key_icmp {
-	__u8 icmp_type;
-	__u8 icmp_code;
-};
-
-struct ovs_key_icmpv6 {
-	__u8 icmpv6_type;
-	__u8 icmpv6_code;
-};
-
-struct ovs_key_arp {
-	__be32 arp_sip;
-	__be32 arp_tip;
-	__be16 arp_op;
-	__u8   arp_sha[6];
-	__u8   arp_tha[6];
-};
-
-struct ovs_key_nd {
-	__u32 nd_target[4];
-	__u8  nd_sll[6];
-	__u8  nd_tll[6];
-};
-
-/**
- * enum ovs_flow_attr - attributes for %OVS_FLOW_* commands.
- * @OVS_FLOW_ATTR_KEY: Nested %OVS_KEY_ATTR_* attributes specifying the flow
- * key.  Always present in notifications.  Required for all requests (except
- * dumps).
- * @OVS_FLOW_ATTR_ACTIONS: Nested %OVS_ACTION_ATTR_* attributes specifying
- * the actions to take for packets that match the key.  Always present in
- * notifications.  Required for %OVS_FLOW_CMD_NEW requests, optional for
- * %OVS_FLOW_CMD_SET requests.
- * @OVS_FLOW_ATTR_STATS: &struct ovs_flow_stats giving statistics for this
- * flow.  Present in notifications if the stats would be nonzero.  Ignored in
- * requests.
- * @OVS_FLOW_ATTR_TCP_FLAGS: An 8-bit value giving the OR'd value of all of the
- * TCP flags seen on packets in this flow.  Only present in notifications for
- * TCP flows, and only if it would be nonzero.  Ignored in requests.
- * @OVS_FLOW_ATTR_USED: A 64-bit integer giving the time, in milliseconds on
- * the system monotonic clock, at which a packet was last processed for this
- * flow.  Only present in notifications if a packet has been processed for this
- * flow.  Ignored in requests.
- * @OVS_FLOW_ATTR_CLEAR: If present in a %OVS_FLOW_CMD_SET request, clears the
- * last-used time, accumulated TCP flags, and statistics for this flow.
- * Otherwise ignored in requests.  Never present in notifications.
- *
- * These attributes follow the &struct ovs_header within the Generic Netlink
- * payload for %OVS_FLOW_* commands.
- */
-enum ovs_flow_attr {
-	OVS_FLOW_ATTR_UNSPEC,
-	OVS_FLOW_ATTR_KEY,       /* Sequence of OVS_KEY_ATTR_* attributes. */
-	OVS_FLOW_ATTR_ACTIONS,   /* Nested OVS_ACTION_ATTR_* attributes. */
-	OVS_FLOW_ATTR_STATS,     /* struct ovs_flow_stats. */
-	OVS_FLOW_ATTR_TCP_FLAGS, /* 8-bit OR'd TCP flags. */
-	OVS_FLOW_ATTR_USED,      /* u64 msecs last used in monotonic time. */
-	OVS_FLOW_ATTR_CLEAR,     /* Flag to clear stats, tcp_flags, used. */
-	__OVS_FLOW_ATTR_MAX
-};
-
-#define OVS_FLOW_ATTR_MAX (__OVS_FLOW_ATTR_MAX - 1)
-
-/**
- * enum ovs_sample_attr - Attributes for %OVS_ACTION_ATTR_SAMPLE action.
- * @OVS_SAMPLE_ATTR_PROBABILITY: 32-bit fraction of packets to sample with
- * @OVS_ACTION_ATTR_SAMPLE.  A value of 0 samples no packets, a value of
- * %UINT32_MAX samples all packets and intermediate values sample intermediate
- * fractions of packets.
- * @OVS_SAMPLE_ATTR_ACTIONS: Set of actions to execute in sampling event.
- * Actions are passed as nested attributes.
- *
- * Executes the specified actions with the given probability on a per-packet
- * basis.
- */
-enum ovs_sample_attr {
-	OVS_SAMPLE_ATTR_UNSPEC,
-	OVS_SAMPLE_ATTR_PROBABILITY, /* u32 number */
-	OVS_SAMPLE_ATTR_ACTIONS,     /* Nested OVS_ACTION_ATTR_* attributes. */
-	__OVS_SAMPLE_ATTR_MAX,
-};
-
-#define OVS_SAMPLE_ATTR_MAX (__OVS_SAMPLE_ATTR_MAX - 1)
-
-/**
- * enum ovs_userspace_attr - Attributes for %OVS_ACTION_ATTR_USERSPACE action.
- * @OVS_USERSPACE_ATTR_PID: u32 Netlink PID to which the %OVS_PACKET_CMD_ACTION
- * message should be sent.  Required.
- * @OVS_USERSPACE_ATTR_USERDATA: If present, its u64 argument is copied to the
- * %OVS_PACKET_CMD_ACTION message as %OVS_PACKET_ATTR_USERDATA,
- */
-enum ovs_userspace_attr {
-	OVS_USERSPACE_ATTR_UNSPEC,
-	OVS_USERSPACE_ATTR_PID,	      /* u32 Netlink PID to receive upcalls. */
-	OVS_USERSPACE_ATTR_USERDATA,  /* u64 optional user-specified cookie. */
-	__OVS_USERSPACE_ATTR_MAX
-};
-
-#define OVS_USERSPACE_ATTR_MAX (__OVS_USERSPACE_ATTR_MAX - 1)
-
-/**
- * struct ovs_action_push_vlan - %OVS_ACTION_ATTR_PUSH_VLAN action argument.
- * @vlan_tpid: Tag protocol identifier (TPID) to push.
- * @vlan_tci: Tag control identifier (TCI) to push.  The CFI bit must be set
- * (but it will not be set in the 802.1Q header that is pushed).
- *
- * The @vlan_tpid value is typically %ETH_P_8021Q.  The only acceptable TPID
- * values are those that the kernel module also parses as 802.1Q headers, to
- * prevent %OVS_ACTION_ATTR_PUSH_VLAN followed by %OVS_ACTION_ATTR_POP_VLAN
- * from having surprising results.
- */
-struct ovs_action_push_vlan {
-	__be16 vlan_tpid;	/* 802.1Q TPID. */
-	__be16 vlan_tci;	/* 802.1Q TCI (VLAN ID and priority). */
-};
-
-/**
- * enum ovs_action_attr - Action types.
- *
- * @OVS_ACTION_ATTR_OUTPUT: Output packet to port.
- * @OVS_ACTION_ATTR_USERSPACE: Send packet to userspace according to nested
- * %OVS_USERSPACE_ATTR_* attributes.
- * @OVS_ACTION_ATTR_SET: Replaces the contents of an existing header.  The
- * single nested %OVS_KEY_ATTR_* attribute specifies a header to modify and its
- * value.
- * @OVS_ACTION_ATTR_PUSH_VLAN: Push a new outermost 802.1Q header onto the
- * packet.
- * @OVS_ACTION_ATTR_POP_VLAN: Pop the outermost 802.1Q header off the packet.
- * @OVS_ACTION_ATTR_SAMPLE: Probabilitically executes actions, as specified in
- * the nested %OVS_SAMPLE_ATTR_* attributes.
- *
- * Only a single header can be set with a single %OVS_ACTION_ATTR_SET.  Not all
- * fields within a header are modifiable, e.g. the IPv4 protocol and fragment
- * type may not be changed.
- */
-
-enum ovs_action_attr {
-	OVS_ACTION_ATTR_UNSPEC,
-	OVS_ACTION_ATTR_OUTPUT,	      /* u32 port number. */
-	OVS_ACTION_ATTR_USERSPACE,    /* Nested OVS_USERSPACE_ATTR_*. */
-	OVS_ACTION_ATTR_SET,          /* One nested OVS_KEY_ATTR_*. */
-	OVS_ACTION_ATTR_PUSH_VLAN,    /* struct ovs_action_push_vlan. */
-	OVS_ACTION_ATTR_POP_VLAN,     /* No argument. */
-	OVS_ACTION_ATTR_SAMPLE,       /* Nested OVS_SAMPLE_ATTR_*. */
-	__OVS_ACTION_ATTR_MAX
-};
-
-#define OVS_ACTION_ATTR_MAX (__OVS_ACTION_ATTR_MAX - 1)
-
-#endif /* _LINUX_OPENVSWITCH_H */
diff --git a/ANDROID_3.4.5/include/linux/opp.h b/ANDROID_3.4.5/include/linux/opp.h
deleted file mode 100644
index 2a4e5fae..00000000
--- a/ANDROID_3.4.5/include/linux/opp.h
+++ /dev/null
@@ -1,126 +0,0 @@
-/*
- * Generic OPP Interface
- *
- * Copyright (C) 2009-2010 Texas Instruments Incorporated.
- *	Nishanth Menon
- *	Romit Dasgupta
- *	Kevin Hilman
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __LINUX_OPP_H__
-#define __LINUX_OPP_H__
-
-#include <linux/err.h>
-#include <linux/cpufreq.h>
-#include <linux/notifier.h>
-
-struct opp;
-struct device;
-
-enum opp_event {
-	OPP_EVENT_ADD, OPP_EVENT_ENABLE, OPP_EVENT_DISABLE,
-};
-
-#if defined(CONFIG_PM_OPP)
-
-unsigned long opp_get_voltage(struct opp *opp);
-
-unsigned long opp_get_freq(struct opp *opp);
-
-int opp_get_opp_count(struct device *dev);
-
-struct opp *opp_find_freq_exact(struct device *dev, unsigned long freq,
-				bool available);
-
-struct opp *opp_find_freq_floor(struct device *dev, unsigned long *freq);
-
-struct opp *opp_find_freq_ceil(struct device *dev, unsigned long *freq);
-
-int opp_add(struct device *dev, unsigned long freq, unsigned long u_volt);
-
-int opp_enable(struct device *dev, unsigned long freq);
-
-int opp_disable(struct device *dev, unsigned long freq);
-
-struct srcu_notifier_head *opp_get_notifier(struct device *dev);
-
-#else
-static inline unsigned long opp_get_voltage(struct opp *opp)
-{
-	return 0;
-}
-
-static inline unsigned long opp_get_freq(struct opp *opp)
-{
-	return 0;
-}
-
-static inline int opp_get_opp_count(struct device *dev)
-{
-	return 0;
-}
-
-static inline struct opp *opp_find_freq_exact(struct device *dev,
-					unsigned long freq, bool available)
-{
-	return ERR_PTR(-EINVAL);
-}
-
-static inline struct opp *opp_find_freq_floor(struct device *dev,
-					unsigned long *freq)
-{
-	return ERR_PTR(-EINVAL);
-}
-
-static inline struct opp *opp_find_freq_ceil(struct device *dev,
-					unsigned long *freq)
-{
-	return ERR_PTR(-EINVAL);
-}
-
-static inline int opp_add(struct device *dev, unsigned long freq,
-					unsigned long u_volt)
-{
-	return -EINVAL;
-}
-
-static inline int opp_enable(struct device *dev, unsigned long freq)
-{
-	return 0;
-}
-
-static inline int opp_disable(struct device *dev, unsigned long freq)
-{
-	return 0;
-}
-
-static inline struct srcu_notifier_head *opp_get_notifier(struct device *dev)
-{
-	return ERR_PTR(-EINVAL);
-}
-#endif		/* CONFIG_PM_OPP */
-
-#if defined(CONFIG_CPU_FREQ) && defined(CONFIG_PM_OPP)
-int opp_init_cpufreq_table(struct device *dev,
-			    struct cpufreq_frequency_table **table);
-void opp_free_cpufreq_table(struct device *dev,
-				struct cpufreq_frequency_table **table);
-#else
-static inline int opp_init_cpufreq_table(struct device *dev,
-			    struct cpufreq_frequency_table **table)
-{
-	return -EINVAL;
-}
-
-static inline
-void opp_free_cpufreq_table(struct device *dev,
-				struct cpufreq_frequency_table **table)
-{
-}
-#endif		/* CONFIG_CPU_FREQ */
-
-#endif		/* __LINUX_OPP_H__ */
diff --git a/ANDROID_3.4.5/include/linux/oprofile.h b/ANDROID_3.4.5/include/linux/oprofile.h
deleted file mode 100644
index a4c56245..00000000
--- a/ANDROID_3.4.5/include/linux/oprofile.h
+++ /dev/null
@@ -1,211 +0,0 @@
-/**
- * @file oprofile.h
- *
- * API for machine-specific interrupts to interface
- * to oprofile.
- *
- * @remark Copyright 2002 OProfile authors
- * @remark Read the file COPYING
- *
- * @author John Levon <levon@movementarian.org>
- */
-
-#ifndef OPROFILE_H
-#define OPROFILE_H
-
-#include <linux/types.h>
-#include <linux/spinlock.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/printk.h>
-#include <linux/atomic.h>
- 
-/* Each escaped entry is prefixed by ESCAPE_CODE
- * then one of the following codes, then the
- * relevant data.
- * These #defines live in this file so that arch-specific
- * buffer sync'ing code can access them.
- */
-#define ESCAPE_CODE			~0UL
-#define CTX_SWITCH_CODE			1
-#define CPU_SWITCH_CODE			2
-#define COOKIE_SWITCH_CODE		3
-#define KERNEL_ENTER_SWITCH_CODE	4
-#define KERNEL_EXIT_SWITCH_CODE		5
-#define MODULE_LOADED_CODE		6
-#define CTX_TGID_CODE			7
-#define TRACE_BEGIN_CODE		8
-#define TRACE_END_CODE			9
-#define XEN_ENTER_SWITCH_CODE		10
-#define SPU_PROFILING_CODE		11
-#define SPU_CTX_SWITCH_CODE		12
-#define IBS_FETCH_CODE			13
-#define IBS_OP_CODE			14
-
-struct super_block;
-struct dentry;
-struct file_operations;
-struct pt_regs;
- 
-/* Operations structure to be filled in */
-struct oprofile_operations {
-	/* create any necessary configuration files in the oprofile fs.
-	 * Optional. */
-	int (*create_files)(struct super_block * sb, struct dentry * root);
-	/* Do any necessary interrupt setup. Optional. */
-	int (*setup)(void);
-	/* Do any necessary interrupt shutdown. Optional. */
-	void (*shutdown)(void);
-	/* Start delivering interrupts. */
-	int (*start)(void);
-	/* Stop delivering interrupts. */
-	void (*stop)(void);
-	/* Arch-specific buffer sync functions.
-	 * Return value = 0:  Success
-	 * Return value = -1: Failure
-	 * Return value = 1:  Run generic sync function
-	 */
-	int (*sync_start)(void);
-	int (*sync_stop)(void);
-
-	/* Initiate a stack backtrace. Optional. */
-	void (*backtrace)(struct pt_regs * const regs, unsigned int depth);
-
-	/* Multiplex between different events. Optional. */
-	int (*switch_events)(void);
-	/* CPU identification string. */
-	char * cpu_type;
-};
-
-/**
- * One-time initialisation. *ops must be set to a filled-in
- * operations structure. This is called even in timer interrupt
- * mode so an arch can set a backtrace callback.
- *
- * If an error occurs, the fields should be left untouched.
- */
-int oprofile_arch_init(struct oprofile_operations * ops);
- 
-/**
- * One-time exit/cleanup for the arch.
- */
-void oprofile_arch_exit(void);
-
-/**
- * Add a sample. This may be called from any context.
- */
-void oprofile_add_sample(struct pt_regs * const regs, unsigned long event);
-
-/**
- * Add an extended sample.  Use this when the PC is not from the regs, and
- * we cannot determine if we're in kernel mode from the regs.
- *
- * This function does perform a backtrace.
- *
- */
-void oprofile_add_ext_sample(unsigned long pc, struct pt_regs * const regs,
-				unsigned long event, int is_kernel);
-
-/**
- * Add an hardware sample.
- */
-void oprofile_add_ext_hw_sample(unsigned long pc, struct pt_regs * const regs,
-	unsigned long event, int is_kernel,
-	struct task_struct *task);
-
-/* Use this instead when the PC value is not from the regs. Doesn't
- * backtrace. */
-void oprofile_add_pc(unsigned long pc, int is_kernel, unsigned long event);
-
-/* add a backtrace entry, to be called from the ->backtrace callback */
-void oprofile_add_trace(unsigned long eip);
-
-
-/**
- * Create a file of the given name as a child of the given root, with
- * the specified file operations.
- */
-int oprofilefs_create_file(struct super_block * sb, struct dentry * root,
-	char const * name, const struct file_operations * fops);
-
-int oprofilefs_create_file_perm(struct super_block * sb, struct dentry * root,
-	char const * name, const struct file_operations * fops, int perm);
- 
-/** Create a file for read/write access to an unsigned long. */
-int oprofilefs_create_ulong(struct super_block * sb, struct dentry * root,
-	char const * name, ulong * val);
- 
-/** Create a file for read-only access to an unsigned long. */
-int oprofilefs_create_ro_ulong(struct super_block * sb, struct dentry * root,
-	char const * name, ulong * val);
- 
-/** Create a file for read-only access to an atomic_t. */
-int oprofilefs_create_ro_atomic(struct super_block * sb, struct dentry * root,
-	char const * name, atomic_t * val);
- 
-/** create a directory */
-struct dentry * oprofilefs_mkdir(struct super_block * sb, struct dentry * root,
-	char const * name);
-
-/**
- * Write the given asciz string to the given user buffer @buf, updating *offset
- * appropriately. Returns bytes written or -EFAULT.
- */
-ssize_t oprofilefs_str_to_user(char const * str, char __user * buf, size_t count, loff_t * offset);
-
-/**
- * Convert an unsigned long value into ASCII and copy it to the user buffer @buf,
- * updating *offset appropriately. Returns bytes written or -EFAULT.
- */
-ssize_t oprofilefs_ulong_to_user(unsigned long val, char __user * buf, size_t count, loff_t * offset);
-
-/**
- * Read an ASCII string for a number from a userspace buffer and fill *val on success.
- * Returns 0 on success, < 0 on error.
- */
-int oprofilefs_ulong_from_user(unsigned long * val, char const __user * buf, size_t count);
-
-/** lock for read/write safety */
-extern raw_spinlock_t oprofilefs_lock;
-
-/**
- * Add the contents of a circular buffer to the event buffer.
- */
-void oprofile_put_buff(unsigned long *buf, unsigned int start,
-			unsigned int stop, unsigned int max);
-
-unsigned long oprofile_get_cpu_buffer_size(void);
-void oprofile_cpu_buffer_inc_smpl_lost(void);
- 
-/* cpu buffer functions */
-
-struct op_sample;
-
-struct op_entry {
-	struct ring_buffer_event *event;
-	struct op_sample *sample;
-	unsigned long size;
-	unsigned long *data;
-};
-
-void oprofile_write_reserve(struct op_entry *entry,
-			    struct pt_regs * const regs,
-			    unsigned long pc, int code, int size);
-int oprofile_add_data(struct op_entry *entry, unsigned long val);
-int oprofile_add_data64(struct op_entry *entry, u64 val);
-int oprofile_write_commit(struct op_entry *entry);
-
-#ifdef CONFIG_HW_PERF_EVENTS
-int __init oprofile_perf_init(struct oprofile_operations *ops);
-void oprofile_perf_exit(void);
-char *op_name_from_perf_id(void);
-#else
-static inline int __init oprofile_perf_init(struct oprofile_operations *ops)
-{
-	pr_info("oprofile: hardware counters not available\n");
-	return -ENODEV;
-}
-static inline void oprofile_perf_exit(void) { }
-#endif /* CONFIG_HW_PERF_EVENTS */
-
-#endif /* OPROFILE_H */
diff --git a/ANDROID_3.4.5/include/linux/oxu210hp.h b/ANDROID_3.4.5/include/linux/oxu210hp.h
deleted file mode 100644
index 0bf96eae..00000000
--- a/ANDROID_3.4.5/include/linux/oxu210hp.h
+++ /dev/null
@@ -1,7 +0,0 @@
-/* platform data for the OXU210HP HCD */
-
-struct oxu210hp_platform_data {
-	unsigned int bus16:1;
-	unsigned int use_hcd_otg:1;
-	unsigned int use_hcd_sph:1;
-};
diff --git a/ANDROID_3.4.5/include/linux/padata.h b/ANDROID_3.4.5/include/linux/padata.h
deleted file mode 100644
index 86292bee..00000000
--- a/ANDROID_3.4.5/include/linux/padata.h
+++ /dev/null
@@ -1,190 +0,0 @@
-/*
- * padata.h - header for the padata parallelization interface
- *
- * Copyright (C) 2008, 2009 secunet Security Networks AG
- * Copyright (C) 2008, 2009 Steffen Klassert <steffen.klassert@secunet.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#ifndef PADATA_H
-#define PADATA_H
-
-#include <linux/workqueue.h>
-#include <linux/spinlock.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/notifier.h>
-#include <linux/kobject.h>
-
-#define PADATA_CPU_SERIAL   0x01
-#define PADATA_CPU_PARALLEL 0x02
-
-/**
- * struct padata_priv -  Embedded to the users data structure.
- *
- * @list: List entry, to attach to the padata lists.
- * @pd: Pointer to the internal control structure.
- * @cb_cpu: Callback cpu for serializatioon.
- * @seq_nr: Sequence number of the parallelized data object.
- * @info: Used to pass information from the parallel to the serial function.
- * @parallel: Parallel execution function.
- * @serial: Serial complete function.
- */
-struct padata_priv {
-	struct list_head	list;
-	struct parallel_data	*pd;
-	int			cb_cpu;
-	int			info;
-	void                    (*parallel)(struct padata_priv *padata);
-	void                    (*serial)(struct padata_priv *padata);
-};
-
-/**
- * struct padata_list
- *
- * @list: List head.
- * @lock: List lock.
- */
-struct padata_list {
-	struct list_head        list;
-	spinlock_t              lock;
-};
-
-/**
-* struct padata_serial_queue - The percpu padata serial queue
-*
-* @serial: List to wait for serialization after reordering.
-* @work: work struct for serialization.
-* @pd: Backpointer to the internal control structure.
-*/
-struct padata_serial_queue {
-       struct padata_list    serial;
-       struct work_struct    work;
-       struct parallel_data *pd;
-};
-
-/**
- * struct padata_parallel_queue - The percpu padata parallel queue
- *
- * @parallel: List to wait for parallelization.
- * @reorder: List to wait for reordering after parallel processing.
- * @serial: List to wait for serialization after reordering.
- * @pwork: work struct for parallelization.
- * @swork: work struct for serialization.
- * @pd: Backpointer to the internal control structure.
- * @work: work struct for parallelization.
- * @num_obj: Number of objects that are processed by this cpu.
- * @cpu_index: Index of the cpu.
- */
-struct padata_parallel_queue {
-       struct padata_list    parallel;
-       struct padata_list    reorder;
-       struct parallel_data *pd;
-       struct work_struct    work;
-       atomic_t              num_obj;
-       int                   cpu_index;
-};
-
-/**
- * struct padata_cpumask - The cpumasks for the parallel/serial workers
- *
- * @pcpu: cpumask for the parallel workers.
- * @cbcpu: cpumask for the serial (callback) workers.
- */
-struct padata_cpumask {
-	cpumask_var_t	pcpu;
-	cpumask_var_t	cbcpu;
-};
-
-/**
- * struct parallel_data - Internal control structure, covers everything
- * that depends on the cpumask in use.
- *
- * @pinst: padata instance.
- * @pqueue: percpu padata queues used for parallelization.
- * @squeue: percpu padata queues used for serialuzation.
- * @reorder_objects: Number of objects waiting in the reorder queues.
- * @refcnt: Number of objects holding a reference on this parallel_data.
- * @max_seq_nr:  Maximal used sequence number.
- * @cpumask: The cpumasks in use for parallel and serial workers.
- * @lock: Reorder lock.
- * @processed: Number of already processed objects.
- * @timer: Reorder timer.
- */
-struct parallel_data {
-	struct padata_instance		*pinst;
-	struct padata_parallel_queue	__percpu *pqueue;
-	struct padata_serial_queue	__percpu *squeue;
-	atomic_t			reorder_objects;
-	atomic_t			refcnt;
-	struct padata_cpumask		cpumask;
-	spinlock_t                      lock ____cacheline_aligned;
-	spinlock_t                      seq_lock;
-	unsigned int			seq_nr;
-	unsigned int			processed;
-	struct timer_list		timer;
-};
-
-/**
- * struct padata_instance - The overall control structure.
- *
- * @cpu_notifier: cpu hotplug notifier.
- * @wq: The workqueue in use.
- * @pd: The internal control structure.
- * @cpumask: User supplied cpumasks for parallel and serial works.
- * @cpumask_change_notifier: Notifiers chain for user-defined notify
- *            callbacks that will be called when either @pcpu or @cbcpu
- *            or both cpumasks change.
- * @kobj: padata instance kernel object.
- * @lock: padata instance lock.
- * @flags: padata flags.
- */
-struct padata_instance {
-	struct notifier_block		 cpu_notifier;
-	struct workqueue_struct		*wq;
-	struct parallel_data		*pd;
-	struct padata_cpumask		cpumask;
-	struct blocking_notifier_head	 cpumask_change_notifier;
-	struct kobject                   kobj;
-	struct mutex			 lock;
-	u8				 flags;
-#define	PADATA_INIT	1
-#define	PADATA_RESET	2
-#define	PADATA_INVALID	4
-};
-
-extern struct padata_instance *padata_alloc_possible(
-					struct workqueue_struct *wq);
-extern struct padata_instance *padata_alloc(struct workqueue_struct *wq,
-					    const struct cpumask *pcpumask,
-					    const struct cpumask *cbcpumask);
-extern void padata_free(struct padata_instance *pinst);
-extern int padata_do_parallel(struct padata_instance *pinst,
-			      struct padata_priv *padata, int cb_cpu);
-extern void padata_do_serial(struct padata_priv *padata);
-extern int padata_set_cpumask(struct padata_instance *pinst, int cpumask_type,
-			      cpumask_var_t cpumask);
-extern int padata_set_cpumasks(struct padata_instance *pinst,
-			       cpumask_var_t pcpumask,
-			       cpumask_var_t cbcpumask);
-extern int padata_add_cpu(struct padata_instance *pinst, int cpu, int mask);
-extern int padata_remove_cpu(struct padata_instance *pinst, int cpu, int mask);
-extern int padata_start(struct padata_instance *pinst);
-extern void padata_stop(struct padata_instance *pinst);
-extern int padata_register_cpumask_notifier(struct padata_instance *pinst,
-					    struct notifier_block *nblock);
-extern int padata_unregister_cpumask_notifier(struct padata_instance *pinst,
-					      struct notifier_block *nblock);
-#endif
diff --git a/ANDROID_3.4.5/include/linux/page-debug-flags.h b/ANDROID_3.4.5/include/linux/page-debug-flags.h
deleted file mode 100644
index 22691f61..00000000
--- a/ANDROID_3.4.5/include/linux/page-debug-flags.h
+++ /dev/null
@@ -1,32 +0,0 @@
-#ifndef LINUX_PAGE_DEBUG_FLAGS_H
-#define  LINUX_PAGE_DEBUG_FLAGS_H
-
-/*
- * page->debug_flags bits:
- *
- * PAGE_DEBUG_FLAG_POISON is set for poisoned pages. This is used to
- * implement generic debug pagealloc feature. The pages are filled with
- * poison patterns and set this flag after free_pages(). The poisoned
- * pages are verified whether the patterns are not corrupted and clear
- * the flag before alloc_pages().
- */
-
-enum page_debug_flags {
-	PAGE_DEBUG_FLAG_POISON,		/* Page is poisoned */
-	PAGE_DEBUG_FLAG_GUARD,
-};
-
-/*
- * Ensure that CONFIG_WANT_PAGE_DEBUG_FLAGS reliably
- * gets turned off when no debug features are enabling it!
- */
-
-#ifdef CONFIG_WANT_PAGE_DEBUG_FLAGS
-#if !defined(CONFIG_PAGE_POISONING) && \
-    !defined(CONFIG_PAGE_GUARD) \
-/* && !defined(CONFIG_PAGE_DEBUG_SOMETHING_ELSE) && ... */
-#error WANT_PAGE_DEBUG_FLAGS is turned on with no debug features!
-#endif
-#endif /* CONFIG_WANT_PAGE_DEBUG_FLAGS */
-
-#endif /* LINUX_PAGE_DEBUG_FLAGS_H */
diff --git a/ANDROID_3.4.5/include/linux/page-flags.h b/ANDROID_3.4.5/include/linux/page-flags.h
deleted file mode 100644
index c88d2a94..00000000
--- a/ANDROID_3.4.5/include/linux/page-flags.h
+++ /dev/null
@@ -1,503 +0,0 @@
-/*
- * Macros for manipulating and testing page->flags
- */
-
-#ifndef PAGE_FLAGS_H
-#define PAGE_FLAGS_H
-
-#include <linux/types.h>
-#include <linux/bug.h>
-#ifndef __GENERATING_BOUNDS_H
-#include <linux/mm_types.h>
-#include <generated/bounds.h>
-#endif /* !__GENERATING_BOUNDS_H */
-
-/*
- * Various page->flags bits:
- *
- * PG_reserved is set for special pages, which can never be swapped out. Some
- * of them might not even exist (eg empty_bad_page)...
- *
- * The PG_private bitflag is set on pagecache pages if they contain filesystem
- * specific data (which is normally at page->private). It can be used by
- * private allocations for its own usage.
- *
- * During initiation of disk I/O, PG_locked is set. This bit is set before I/O
- * and cleared when writeback _starts_ or when read _completes_. PG_writeback
- * is set before writeback starts and cleared when it finishes.
- *
- * PG_locked also pins a page in pagecache, and blocks truncation of the file
- * while it is held.
- *
- * page_waitqueue(page) is a wait queue of all tasks waiting for the page
- * to become unlocked.
- *
- * PG_uptodate tells whether the page's contents is valid.  When a read
- * completes, the page becomes uptodate, unless a disk I/O error happened.
- *
- * PG_referenced, PG_reclaim are used for page reclaim for anonymous and
- * file-backed pagecache (see mm/vmscan.c).
- *
- * PG_error is set to indicate that an I/O error occurred on this page.
- *
- * PG_arch_1 is an architecture specific page state bit.  The generic code
- * guarantees that this bit is cleared for a page when it first is entered into
- * the page cache.
- *
- * PG_highmem pages are not permanently mapped into the kernel virtual address
- * space, they need to be kmapped separately for doing IO on the pages.  The
- * struct page (these bits with information) are always mapped into kernel
- * address space...
- *
- * PG_hwpoison indicates that a page got corrupted in hardware and contains
- * data with incorrect ECC bits that triggered a machine check. Accessing is
- * not safe since it may cause another machine check. Don't touch!
- */
-
-/*
- * Don't use the *_dontuse flags.  Use the macros.  Otherwise you'll break
- * locked- and dirty-page accounting.
- *
- * The page flags field is split into two parts, the main flags area
- * which extends from the low bits upwards, and the fields area which
- * extends from the high bits downwards.
- *
- *  | FIELD | ... | FLAGS |
- *  N-1           ^       0
- *               (NR_PAGEFLAGS)
- *
- * The fields area is reserved for fields mapping zone, node (for NUMA) and
- * SPARSEMEM section (for variants of SPARSEMEM that require section ids like
- * SPARSEMEM_EXTREME with !SPARSEMEM_VMEMMAP).
- */
-enum pageflags {
-	PG_locked,		/* Page is locked. Don't touch. */
-	PG_error,
-	PG_referenced,
-	PG_uptodate,
-	PG_dirty,
-	PG_lru,
-	PG_active,
-	PG_slab,
-	PG_owner_priv_1,	/* Owner use. If pagecache, fs may use*/
-	PG_arch_1,
-	PG_reserved,
-	PG_private,		/* If pagecache, has fs-private data */
-	PG_private_2,		/* If pagecache, has fs aux data */
-	PG_writeback,		/* Page is under writeback */
-#ifdef CONFIG_PAGEFLAGS_EXTENDED
-	PG_head,		/* A head page */
-	PG_tail,		/* A tail page */
-#else
-	PG_compound,		/* A compound page */
-#endif
-	PG_swapcache,		/* Swap page: swp_entry_t in private */
-	PG_mappedtodisk,	/* Has blocks allocated on-disk */
-	PG_reclaim,		/* To be reclaimed asap */
-	PG_swapbacked,		/* Page is backed by RAM/swap */
-	PG_unevictable,		/* Page is "unevictable"  */
-#ifdef CONFIG_MMU
-	PG_mlocked,		/* Page is vma mlocked */
-#endif
-#ifdef CONFIG_ARCH_USES_PG_UNCACHED
-	PG_uncached,		/* Page has been mapped as uncached */
-#endif
-#ifdef CONFIG_MEMORY_FAILURE
-	PG_hwpoison,		/* hardware poisoned page. Don't touch */
-#endif
-#ifdef CONFIG_TRANSPARENT_HUGEPAGE
-	PG_compound_lock,
-#endif
-	__NR_PAGEFLAGS,
-
-	/* Filesystems */
-	PG_checked = PG_owner_priv_1,
-
-	/* Two page bits are conscripted by FS-Cache to maintain local caching
-	 * state.  These bits are set on pages belonging to the netfs's inodes
-	 * when those inodes are being locally cached.
-	 */
-	PG_fscache = PG_private_2,	/* page backed by cache */
-
-	/* XEN */
-	PG_pinned = PG_owner_priv_1,
-	PG_savepinned = PG_dirty,
-
-	/* SLOB */
-	PG_slob_free = PG_private,
-};
-
-#ifndef __GENERATING_BOUNDS_H
-
-/*
- * Macros to create function definitions for page flags
- */
-#define TESTPAGEFLAG(uname, lname)					\
-static inline int Page##uname(const struct page *page)			\
-			{ return test_bit(PG_##lname, &page->flags); }
-
-#define SETPAGEFLAG(uname, lname)					\
-static inline void SetPage##uname(struct page *page)			\
-			{ set_bit(PG_##lname, &page->flags); }
-
-#define CLEARPAGEFLAG(uname, lname)					\
-static inline void ClearPage##uname(struct page *page)			\
-			{ clear_bit(PG_##lname, &page->flags); }
-
-#define __SETPAGEFLAG(uname, lname)					\
-static inline void __SetPage##uname(struct page *page)			\
-			{ __set_bit(PG_##lname, &page->flags); }
-
-#define __CLEARPAGEFLAG(uname, lname)					\
-static inline void __ClearPage##uname(struct page *page)		\
-			{ __clear_bit(PG_##lname, &page->flags); }
-
-#define TESTSETFLAG(uname, lname)					\
-static inline int TestSetPage##uname(struct page *page)			\
-		{ return test_and_set_bit(PG_##lname, &page->flags); }
-
-#define TESTCLEARFLAG(uname, lname)					\
-static inline int TestClearPage##uname(struct page *page)		\
-		{ return test_and_clear_bit(PG_##lname, &page->flags); }
-
-#define __TESTCLEARFLAG(uname, lname)					\
-static inline int __TestClearPage##uname(struct page *page)		\
-		{ return __test_and_clear_bit(PG_##lname, &page->flags); }
-
-#define PAGEFLAG(uname, lname) TESTPAGEFLAG(uname, lname)		\
-	SETPAGEFLAG(uname, lname) CLEARPAGEFLAG(uname, lname)
-
-#define __PAGEFLAG(uname, lname) TESTPAGEFLAG(uname, lname)		\
-	__SETPAGEFLAG(uname, lname)  __CLEARPAGEFLAG(uname, lname)
-
-#define PAGEFLAG_FALSE(uname) 						\
-static inline int Page##uname(const struct page *page)			\
-			{ return 0; }
-
-#define TESTSCFLAG(uname, lname)					\
-	TESTSETFLAG(uname, lname) TESTCLEARFLAG(uname, lname)
-
-#define SETPAGEFLAG_NOOP(uname)						\
-static inline void SetPage##uname(struct page *page) {  }
-
-#define CLEARPAGEFLAG_NOOP(uname)					\
-static inline void ClearPage##uname(struct page *page) {  }
-
-#define __CLEARPAGEFLAG_NOOP(uname)					\
-static inline void __ClearPage##uname(struct page *page) {  }
-
-#define TESTCLEARFLAG_FALSE(uname)					\
-static inline int TestClearPage##uname(struct page *page) { return 0; }
-
-#define __TESTCLEARFLAG_FALSE(uname)					\
-static inline int __TestClearPage##uname(struct page *page) { return 0; }
-
-struct page;	/* forward declaration */
-
-TESTPAGEFLAG(Locked, locked)
-PAGEFLAG(Error, error) TESTCLEARFLAG(Error, error)
-PAGEFLAG(Referenced, referenced) TESTCLEARFLAG(Referenced, referenced)
-PAGEFLAG(Dirty, dirty) TESTSCFLAG(Dirty, dirty) __CLEARPAGEFLAG(Dirty, dirty)
-PAGEFLAG(LRU, lru) __CLEARPAGEFLAG(LRU, lru)
-PAGEFLAG(Active, active) __CLEARPAGEFLAG(Active, active)
-	TESTCLEARFLAG(Active, active)
-__PAGEFLAG(Slab, slab)
-PAGEFLAG(Checked, checked)		/* Used by some filesystems */
-PAGEFLAG(Pinned, pinned) TESTSCFLAG(Pinned, pinned)	/* Xen */
-PAGEFLAG(SavePinned, savepinned);			/* Xen */
-PAGEFLAG(Reserved, reserved) __CLEARPAGEFLAG(Reserved, reserved)
-PAGEFLAG(SwapBacked, swapbacked) __CLEARPAGEFLAG(SwapBacked, swapbacked)
-
-__PAGEFLAG(SlobFree, slob_free)
-
-/*
- * Private page markings that may be used by the filesystem that owns the page
- * for its own purposes.
- * - PG_private and PG_private_2 cause releasepage() and co to be invoked
- */
-PAGEFLAG(Private, private) __SETPAGEFLAG(Private, private)
-	__CLEARPAGEFLAG(Private, private)
-PAGEFLAG(Private2, private_2) TESTSCFLAG(Private2, private_2)
-PAGEFLAG(OwnerPriv1, owner_priv_1) TESTCLEARFLAG(OwnerPriv1, owner_priv_1)
-
-/*
- * Only test-and-set exist for PG_writeback.  The unconditional operators are
- * risky: they bypass page accounting.
- */
-TESTPAGEFLAG(Writeback, writeback) TESTSCFLAG(Writeback, writeback)
-PAGEFLAG(MappedToDisk, mappedtodisk)
-
-/* PG_readahead is only used for file reads; PG_reclaim is only for writes */
-PAGEFLAG(Reclaim, reclaim) TESTCLEARFLAG(Reclaim, reclaim)
-PAGEFLAG(Readahead, reclaim)		/* Reminder to do async read-ahead */
-
-#ifdef CONFIG_HIGHMEM
-/*
- * Must use a macro here due to header dependency issues. page_zone() is not
- * available at this point.
- */
-#define PageHighMem(__p) is_highmem(page_zone(__p))
-#else
-PAGEFLAG_FALSE(HighMem)
-#endif
-
-#ifdef CONFIG_SWAP
-PAGEFLAG(SwapCache, swapcache)
-#else
-PAGEFLAG_FALSE(SwapCache)
-	SETPAGEFLAG_NOOP(SwapCache) CLEARPAGEFLAG_NOOP(SwapCache)
-#endif
-
-PAGEFLAG(Unevictable, unevictable) __CLEARPAGEFLAG(Unevictable, unevictable)
-	TESTCLEARFLAG(Unevictable, unevictable)
-
-#ifdef CONFIG_MMU
-PAGEFLAG(Mlocked, mlocked) __CLEARPAGEFLAG(Mlocked, mlocked)
-	TESTSCFLAG(Mlocked, mlocked) __TESTCLEARFLAG(Mlocked, mlocked)
-#else
-PAGEFLAG_FALSE(Mlocked) SETPAGEFLAG_NOOP(Mlocked)
-	TESTCLEARFLAG_FALSE(Mlocked) __TESTCLEARFLAG_FALSE(Mlocked)
-#endif
-
-#ifdef CONFIG_ARCH_USES_PG_UNCACHED
-PAGEFLAG(Uncached, uncached)
-#else
-PAGEFLAG_FALSE(Uncached)
-#endif
-
-#ifdef CONFIG_MEMORY_FAILURE
-PAGEFLAG(HWPoison, hwpoison)
-TESTSCFLAG(HWPoison, hwpoison)
-#define __PG_HWPOISON (1UL << PG_hwpoison)
-#else
-PAGEFLAG_FALSE(HWPoison)
-#define __PG_HWPOISON 0
-#endif
-
-u64 stable_page_flags(struct page *page);
-
-static inline int PageUptodate(struct page *page)
-{
-	int ret = test_bit(PG_uptodate, &(page)->flags);
-
-	/*
-	 * Must ensure that the data we read out of the page is loaded
-	 * _after_ we've loaded page->flags to check for PageUptodate.
-	 * We can skip the barrier if the page is not uptodate, because
-	 * we wouldn't be reading anything from it.
-	 *
-	 * See SetPageUptodate() for the other side of the story.
-	 */
-	if (ret)
-		smp_rmb();
-
-	return ret;
-}
-
-static inline void __SetPageUptodate(struct page *page)
-{
-	smp_wmb();
-	__set_bit(PG_uptodate, &(page)->flags);
-}
-
-static inline void SetPageUptodate(struct page *page)
-{
-#ifdef CONFIG_S390
-	if (!test_and_set_bit(PG_uptodate, &page->flags))
-		page_set_storage_key(page_to_phys(page), PAGE_DEFAULT_KEY, 0);
-#else
-	/*
-	 * Memory barrier must be issued before setting the PG_uptodate bit,
-	 * so that all previous stores issued in order to bring the page
-	 * uptodate are actually visible before PageUptodate becomes true.
-	 *
-	 * s390 doesn't need an explicit smp_wmb here because the test and
-	 * set bit already provides full barriers.
-	 */
-	smp_wmb();
-	set_bit(PG_uptodate, &(page)->flags);
-#endif
-}
-
-CLEARPAGEFLAG(Uptodate, uptodate)
-
-extern void cancel_dirty_page(struct page *page, unsigned int account_size);
-
-int test_clear_page_writeback(struct page *page);
-int test_set_page_writeback(struct page *page);
-
-static inline void set_page_writeback(struct page *page)
-{
-	test_set_page_writeback(page);
-}
-
-#ifdef CONFIG_PAGEFLAGS_EXTENDED
-/*
- * System with lots of page flags available. This allows separate
- * flags for PageHead() and PageTail() checks of compound pages so that bit
- * tests can be used in performance sensitive paths. PageCompound is
- * generally not used in hot code paths.
- */
-__PAGEFLAG(Head, head) CLEARPAGEFLAG(Head, head)
-__PAGEFLAG(Tail, tail)
-
-static inline int PageCompound(struct page *page)
-{
-	return page->flags & ((1L << PG_head) | (1L << PG_tail));
-
-}
-#ifdef CONFIG_TRANSPARENT_HUGEPAGE
-static inline void ClearPageCompound(struct page *page)
-{
-	BUG_ON(!PageHead(page));
-	ClearPageHead(page);
-}
-#endif
-#else
-/*
- * Reduce page flag use as much as possible by overlapping
- * compound page flags with the flags used for page cache pages. Possible
- * because PageCompound is always set for compound pages and not for
- * pages on the LRU and/or pagecache.
- */
-TESTPAGEFLAG(Compound, compound)
-__PAGEFLAG(Head, compound)
-
-/*
- * PG_reclaim is used in combination with PG_compound to mark the
- * head and tail of a compound page. This saves one page flag
- * but makes it impossible to use compound pages for the page cache.
- * The PG_reclaim bit would have to be used for reclaim or readahead
- * if compound pages enter the page cache.
- *
- * PG_compound & PG_reclaim	=> Tail page
- * PG_compound & ~PG_reclaim	=> Head page
- */
-#define PG_head_tail_mask ((1L << PG_compound) | (1L << PG_reclaim))
-
-static inline int PageTail(struct page *page)
-{
-	return ((page->flags & PG_head_tail_mask) == PG_head_tail_mask);
-}
-
-static inline void __SetPageTail(struct page *page)
-{
-	page->flags |= PG_head_tail_mask;
-}
-
-static inline void __ClearPageTail(struct page *page)
-{
-	page->flags &= ~PG_head_tail_mask;
-}
-
-#ifdef CONFIG_TRANSPARENT_HUGEPAGE
-static inline void ClearPageCompound(struct page *page)
-{
-	BUG_ON((page->flags & PG_head_tail_mask) != (1 << PG_compound));
-	clear_bit(PG_compound, &page->flags);
-}
-#endif
-
-#endif /* !PAGEFLAGS_EXTENDED */
-
-#ifdef CONFIG_TRANSPARENT_HUGEPAGE
-/*
- * PageHuge() only returns true for hugetlbfs pages, but not for
- * normal or transparent huge pages.
- *
- * PageTransHuge() returns true for both transparent huge and
- * hugetlbfs pages, but not normal pages. PageTransHuge() can only be
- * called only in the core VM paths where hugetlbfs pages can't exist.
- */
-static inline int PageTransHuge(struct page *page)
-{
-	VM_BUG_ON(PageTail(page));
-	return PageHead(page);
-}
-
-/*
- * PageTransCompound returns true for both transparent huge pages
- * and hugetlbfs pages, so it should only be called when it's known
- * that hugetlbfs pages aren't involved.
- */
-static inline int PageTransCompound(struct page *page)
-{
-	return PageCompound(page);
-}
-
-/*
- * PageTransTail returns true for both transparent huge pages
- * and hugetlbfs pages, so it should only be called when it's known
- * that hugetlbfs pages aren't involved.
- */
-static inline int PageTransTail(struct page *page)
-{
-	return PageTail(page);
-}
-
-#else
-
-static inline int PageTransHuge(struct page *page)
-{
-	return 0;
-}
-
-static inline int PageTransCompound(struct page *page)
-{
-	return 0;
-}
-
-static inline int PageTransTail(struct page *page)
-{
-	return 0;
-}
-#endif
-
-#ifdef CONFIG_MMU
-#define __PG_MLOCKED		(1 << PG_mlocked)
-#else
-#define __PG_MLOCKED		0
-#endif
-
-#ifdef CONFIG_TRANSPARENT_HUGEPAGE
-#define __PG_COMPOUND_LOCK		(1 << PG_compound_lock)
-#else
-#define __PG_COMPOUND_LOCK		0
-#endif
-
-/*
- * Flags checked when a page is freed.  Pages being freed should not have
- * these flags set.  It they are, there is a problem.
- */
-#define PAGE_FLAGS_CHECK_AT_FREE \
-	(1 << PG_lru	 | 1 << PG_locked    | \
-	 1 << PG_private | 1 << PG_private_2 | \
-	 1 << PG_writeback | 1 << PG_reserved | \
-	 1 << PG_slab	 | 1 << PG_swapcache | 1 << PG_active | \
-	 1 << PG_unevictable | __PG_MLOCKED | __PG_HWPOISON | \
-	 __PG_COMPOUND_LOCK)
-
-/*
- * Flags checked when a page is prepped for return by the page allocator.
- * Pages being prepped should not have any flags set.  It they are set,
- * there has been a kernel bug or struct page corruption.
- */
-#define PAGE_FLAGS_CHECK_AT_PREP	((1 << NR_PAGEFLAGS) - 1)
-
-#define PAGE_FLAGS_PRIVATE				\
-	(1 << PG_private | 1 << PG_private_2)
-/**
- * page_has_private - Determine if page has private stuff
- * @page: The page to be checked
- *
- * Determine if a page has private stuff, indicating that release routines
- * should be invoked upon it.
- */
-static inline int page_has_private(struct page *page)
-{
-	return !!(page->flags & PAGE_FLAGS_PRIVATE);
-}
-
-#endif /* !__GENERATING_BOUNDS_H */
-
-#endif	/* PAGE_FLAGS_H */
diff --git a/ANDROID_3.4.5/include/linux/page-isolation.h b/ANDROID_3.4.5/include/linux/page-isolation.h
deleted file mode 100644
index 051c1b1e..00000000
--- a/ANDROID_3.4.5/include/linux/page-isolation.h
+++ /dev/null
@@ -1,37 +0,0 @@
-#ifndef __LINUX_PAGEISOLATION_H
-#define __LINUX_PAGEISOLATION_H
-
-/*
- * Changes migrate type in [start_pfn, end_pfn) to be MIGRATE_ISOLATE.
- * If specified range includes migrate types other than MOVABLE,
- * this will fail with -EBUSY.
- *
- * For isolating all pages in the range finally, the caller have to
- * free all pages in the range. test_page_isolated() can be used for
- * test it.
- */
-extern int
-start_isolate_page_range(unsigned long start_pfn, unsigned long end_pfn);
-
-/*
- * Changes MIGRATE_ISOLATE to MIGRATE_MOVABLE.
- * target range is [start_pfn, end_pfn)
- */
-extern int
-undo_isolate_page_range(unsigned long start_pfn, unsigned long end_pfn);
-
-/*
- * test all pages in [start_pfn, end_pfn)are isolated or not.
- */
-extern int
-test_pages_isolated(unsigned long start_pfn, unsigned long end_pfn);
-
-/*
- * Internal funcs.Changes pageblock's migrate type.
- * Please use make_pagetype_isolated()/make_pagetype_movable().
- */
-extern int set_migratetype_isolate(struct page *page);
-extern void unset_migratetype_isolate(struct page *page);
-
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/page_cgroup.h b/ANDROID_3.4.5/include/linux/page_cgroup.h
deleted file mode 100644
index a88cdba2..00000000
--- a/ANDROID_3.4.5/include/linux/page_cgroup.h
+++ /dev/null
@@ -1,145 +0,0 @@
-#ifndef __LINUX_PAGE_CGROUP_H
-#define __LINUX_PAGE_CGROUP_H
-
-enum {
-	/* flags for mem_cgroup */
-	PCG_LOCK,  /* Lock for pc->mem_cgroup and following bits. */
-	PCG_USED, /* this object is in use. */
-	PCG_MIGRATION, /* under page migration */
-	__NR_PCG_FLAGS,
-};
-
-#ifndef __GENERATING_BOUNDS_H
-#include <generated/bounds.h>
-
-#ifdef CONFIG_CGROUP_MEM_RES_CTLR
-#include <linux/bit_spinlock.h>
-
-/*
- * Page Cgroup can be considered as an extended mem_map.
- * A page_cgroup page is associated with every page descriptor. The
- * page_cgroup helps us identify information about the cgroup
- * All page cgroups are allocated at boot or memory hotplug event,
- * then the page cgroup for pfn always exists.
- */
-struct page_cgroup {
-	unsigned long flags;
-	struct mem_cgroup *mem_cgroup;
-};
-
-void __meminit pgdat_page_cgroup_init(struct pglist_data *pgdat);
-
-#ifdef CONFIG_SPARSEMEM
-static inline void __init page_cgroup_init_flatmem(void)
-{
-}
-extern void __init page_cgroup_init(void);
-#else
-void __init page_cgroup_init_flatmem(void);
-static inline void __init page_cgroup_init(void)
-{
-}
-#endif
-
-struct page_cgroup *lookup_page_cgroup(struct page *page);
-struct page *lookup_cgroup_page(struct page_cgroup *pc);
-
-#define TESTPCGFLAG(uname, lname)			\
-static inline int PageCgroup##uname(struct page_cgroup *pc)	\
-	{ return test_bit(PCG_##lname, &pc->flags); }
-
-#define SETPCGFLAG(uname, lname)			\
-static inline void SetPageCgroup##uname(struct page_cgroup *pc)\
-	{ set_bit(PCG_##lname, &pc->flags);  }
-
-#define CLEARPCGFLAG(uname, lname)			\
-static inline void ClearPageCgroup##uname(struct page_cgroup *pc)	\
-	{ clear_bit(PCG_##lname, &pc->flags);  }
-
-#define TESTCLEARPCGFLAG(uname, lname)			\
-static inline int TestClearPageCgroup##uname(struct page_cgroup *pc)	\
-	{ return test_and_clear_bit(PCG_##lname, &pc->flags);  }
-
-TESTPCGFLAG(Used, USED)
-CLEARPCGFLAG(Used, USED)
-SETPCGFLAG(Used, USED)
-
-SETPCGFLAG(Migration, MIGRATION)
-CLEARPCGFLAG(Migration, MIGRATION)
-TESTPCGFLAG(Migration, MIGRATION)
-
-static inline void lock_page_cgroup(struct page_cgroup *pc)
-{
-	/*
-	 * Don't take this lock in IRQ context.
-	 * This lock is for pc->mem_cgroup, USED, MIGRATION
-	 */
-	bit_spin_lock(PCG_LOCK, &pc->flags);
-}
-
-static inline void unlock_page_cgroup(struct page_cgroup *pc)
-{
-	bit_spin_unlock(PCG_LOCK, &pc->flags);
-}
-
-#else /* CONFIG_CGROUP_MEM_RES_CTLR */
-struct page_cgroup;
-
-static inline void __meminit pgdat_page_cgroup_init(struct pglist_data *pgdat)
-{
-}
-
-static inline struct page_cgroup *lookup_page_cgroup(struct page *page)
-{
-	return NULL;
-}
-
-static inline void page_cgroup_init(void)
-{
-}
-
-static inline void __init page_cgroup_init_flatmem(void)
-{
-}
-
-#endif /* CONFIG_CGROUP_MEM_RES_CTLR */
-
-#include <linux/swap.h>
-
-#ifdef CONFIG_CGROUP_MEM_RES_CTLR_SWAP
-extern unsigned short swap_cgroup_cmpxchg(swp_entry_t ent,
-					unsigned short old, unsigned short new);
-extern unsigned short swap_cgroup_record(swp_entry_t ent, unsigned short id);
-extern unsigned short lookup_swap_cgroup_id(swp_entry_t ent);
-extern int swap_cgroup_swapon(int type, unsigned long max_pages);
-extern void swap_cgroup_swapoff(int type);
-#else
-
-static inline
-unsigned short swap_cgroup_record(swp_entry_t ent, unsigned short id)
-{
-	return 0;
-}
-
-static inline
-unsigned short lookup_swap_cgroup_id(swp_entry_t ent)
-{
-	return 0;
-}
-
-static inline int
-swap_cgroup_swapon(int type, unsigned long max_pages)
-{
-	return 0;
-}
-
-static inline void swap_cgroup_swapoff(int type)
-{
-	return;
-}
-
-#endif /* CONFIG_CGROUP_MEM_RES_CTLR_SWAP */
-
-#endif /* !__GENERATING_BOUNDS_H */
-
-#endif /* __LINUX_PAGE_CGROUP_H */
diff --git a/ANDROID_3.4.5/include/linux/pageblock-flags.h b/ANDROID_3.4.5/include/linux/pageblock-flags.h
deleted file mode 100644
index 19ef95d2..00000000
--- a/ANDROID_3.4.5/include/linux/pageblock-flags.h
+++ /dev/null
@@ -1,74 +0,0 @@
-/*
- * Macros for manipulating and testing flags related to a
- * pageblock_nr_pages number of pages.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation version 2 of the License
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- *
- * Copyright (C) IBM Corporation, 2006
- *
- * Original author, Mel Gorman
- * Major cleanups and reduction of bit operations, Andy Whitcroft
- */
-#ifndef PAGEBLOCK_FLAGS_H
-#define PAGEBLOCK_FLAGS_H
-
-#include <linux/types.h>
-
-/* Bit indices that affect a whole block of pages */
-enum pageblock_bits {
-	PB_migrate,
-	PB_migrate_end = PB_migrate + 3 - 1,
-			/* 3 bits required for migrate types */
-	NR_PAGEBLOCK_BITS
-};
-
-#ifdef CONFIG_HUGETLB_PAGE
-
-#ifdef CONFIG_HUGETLB_PAGE_SIZE_VARIABLE
-
-/* Huge page sizes are variable */
-extern int pageblock_order;
-
-#else /* CONFIG_HUGETLB_PAGE_SIZE_VARIABLE */
-
-/* Huge pages are a constant size */
-#define pageblock_order		HUGETLB_PAGE_ORDER
-
-#endif /* CONFIG_HUGETLB_PAGE_SIZE_VARIABLE */
-
-#else /* CONFIG_HUGETLB_PAGE */
-
-/* If huge pages are not used, group by MAX_ORDER_NR_PAGES */
-#define pageblock_order		(MAX_ORDER-1)
-
-#endif /* CONFIG_HUGETLB_PAGE */
-
-#define pageblock_nr_pages	(1UL << pageblock_order)
-
-/* Forward declaration */
-struct page;
-
-/* Declarations for getting and setting flags. See mm/page_alloc.c */
-unsigned long get_pageblock_flags_group(struct page *page,
-					int start_bitidx, int end_bitidx);
-void set_pageblock_flags_group(struct page *page, unsigned long flags,
-					int start_bitidx, int end_bitidx);
-
-#define get_pageblock_flags(page) \
-			get_pageblock_flags_group(page, 0, NR_PAGEBLOCK_BITS-1)
-#define set_pageblock_flags(page, flags) \
-			set_pageblock_flags_group(page, flags,	\
-						  0, NR_PAGEBLOCK_BITS-1)
-
-#endif	/* PAGEBLOCK_FLAGS_H */
diff --git a/ANDROID_3.4.5/include/linux/pagemap.h b/ANDROID_3.4.5/include/linux/pagemap.h
deleted file mode 100644
index cfaaa694..00000000
--- a/ANDROID_3.4.5/include/linux/pagemap.h
+++ /dev/null
@@ -1,479 +0,0 @@
-#ifndef _LINUX_PAGEMAP_H
-#define _LINUX_PAGEMAP_H
-
-/*
- * Copyright 1995 Linus Torvalds
- */
-#include <linux/mm.h>
-#include <linux/fs.h>
-#include <linux/list.h>
-#include <linux/highmem.h>
-#include <linux/compiler.h>
-#include <asm/uaccess.h>
-#include <linux/gfp.h>
-#include <linux/bitops.h>
-#include <linux/hardirq.h> /* for in_interrupt() */
-#include <linux/hugetlb_inline.h>
-
-/*
- * Bits in mapping->flags.  The lower __GFP_BITS_SHIFT bits are the page
- * allocation mode flags.
- */
-enum mapping_flags {
-	AS_EIO		= __GFP_BITS_SHIFT + 0,	/* IO error on async write */
-	AS_ENOSPC	= __GFP_BITS_SHIFT + 1,	/* ENOSPC on async write */
-	AS_MM_ALL_LOCKS	= __GFP_BITS_SHIFT + 2,	/* under mm_take_all_locks() */
-	AS_UNEVICTABLE	= __GFP_BITS_SHIFT + 3,	/* e.g., ramdisk, SHM_LOCK */
-};
-
-static inline void mapping_set_error(struct address_space *mapping, int error)
-{
-	if (unlikely(error)) {
-		if (error == -ENOSPC)
-			set_bit(AS_ENOSPC, &mapping->flags);
-		else
-			set_bit(AS_EIO, &mapping->flags);
-	}
-}
-
-static inline void mapping_set_unevictable(struct address_space *mapping)
-{
-	set_bit(AS_UNEVICTABLE, &mapping->flags);
-}
-
-static inline void mapping_clear_unevictable(struct address_space *mapping)
-{
-	clear_bit(AS_UNEVICTABLE, &mapping->flags);
-}
-
-static inline int mapping_unevictable(struct address_space *mapping)
-{
-	if (mapping)
-		return test_bit(AS_UNEVICTABLE, &mapping->flags);
-	return !!mapping;
-}
-
-static inline gfp_t mapping_gfp_mask(struct address_space * mapping)
-{
-	return (__force gfp_t)mapping->flags & __GFP_BITS_MASK;
-}
-
-/*
- * This is non-atomic.  Only to be used before the mapping is activated.
- * Probably needs a barrier...
- */
-static inline void mapping_set_gfp_mask(struct address_space *m, gfp_t mask)
-{
-	m->flags = (m->flags & ~(__force unsigned long)__GFP_BITS_MASK) |
-				(__force unsigned long)mask;
-}
-
-/*
- * The page cache can done in larger chunks than
- * one page, because it allows for more efficient
- * throughput (it can then be mapped into user
- * space in smaller chunks for same flexibility).
- *
- * Or rather, it _will_ be done in larger chunks.
- */
-#define PAGE_CACHE_SHIFT	PAGE_SHIFT
-#define PAGE_CACHE_SIZE		PAGE_SIZE
-#define PAGE_CACHE_MASK		PAGE_MASK
-#define PAGE_CACHE_ALIGN(addr)	(((addr)+PAGE_CACHE_SIZE-1)&PAGE_CACHE_MASK)
-
-#define page_cache_get(page)		get_page(page)
-#define page_cache_release(page)	put_page(page)
-void release_pages(struct page **pages, int nr, int cold);
-
-/*
- * speculatively take a reference to a page.
- * If the page is free (_count == 0), then _count is untouched, and 0
- * is returned. Otherwise, _count is incremented by 1 and 1 is returned.
- *
- * This function must be called inside the same rcu_read_lock() section as has
- * been used to lookup the page in the pagecache radix-tree (or page table):
- * this allows allocators to use a synchronize_rcu() to stabilize _count.
- *
- * Unless an RCU grace period has passed, the count of all pages coming out
- * of the allocator must be considered unstable. page_count may return higher
- * than expected, and put_page must be able to do the right thing when the
- * page has been finished with, no matter what it is subsequently allocated
- * for (because put_page is what is used here to drop an invalid speculative
- * reference).
- *
- * This is the interesting part of the lockless pagecache (and lockless
- * get_user_pages) locking protocol, where the lookup-side (eg. find_get_page)
- * has the following pattern:
- * 1. find page in radix tree
- * 2. conditionally increment refcount
- * 3. check the page is still in pagecache (if no, goto 1)
- *
- * Remove-side that cares about stability of _count (eg. reclaim) has the
- * following (with tree_lock held for write):
- * A. atomically check refcount is correct and set it to 0 (atomic_cmpxchg)
- * B. remove page from pagecache
- * C. free the page
- *
- * There are 2 critical interleavings that matter:
- * - 2 runs before A: in this case, A sees elevated refcount and bails out
- * - A runs before 2: in this case, 2 sees zero refcount and retries;
- *   subsequently, B will complete and 1 will find no page, causing the
- *   lookup to return NULL.
- *
- * It is possible that between 1 and 2, the page is removed then the exact same
- * page is inserted into the same position in pagecache. That's OK: the
- * old find_get_page using tree_lock could equally have run before or after
- * such a re-insertion, depending on order that locks are granted.
- *
- * Lookups racing against pagecache insertion isn't a big problem: either 1
- * will find the page or it will not. Likewise, the old find_get_page could run
- * either before the insertion or afterwards, depending on timing.
- */
-static inline int page_cache_get_speculative(struct page *page)
-{
-	VM_BUG_ON(in_interrupt());
-
-#if !defined(CONFIG_SMP) && defined(CONFIG_TREE_RCU)
-# ifdef CONFIG_PREEMPT_COUNT
-	VM_BUG_ON(!in_atomic());
-# endif
-	/*
-	 * Preempt must be disabled here - we rely on rcu_read_lock doing
-	 * this for us.
-	 *
-	 * Pagecache won't be truncated from interrupt context, so if we have
-	 * found a page in the radix tree here, we have pinned its refcount by
-	 * disabling preempt, and hence no need for the "speculative get" that
-	 * SMP requires.
-	 */
-	VM_BUG_ON(page_count(page) == 0);
-	atomic_inc(&page->_count);
-
-#else
-	if (unlikely(!get_page_unless_zero(page))) {
-		/*
-		 * Either the page has been freed, or will be freed.
-		 * In either case, retry here and the caller should
-		 * do the right thing (see comments above).
-		 */
-		return 0;
-	}
-#endif
-	VM_BUG_ON(PageTail(page));
-
-	return 1;
-}
-
-/*
- * Same as above, but add instead of inc (could just be merged)
- */
-static inline int page_cache_add_speculative(struct page *page, int count)
-{
-	VM_BUG_ON(in_interrupt());
-
-#if !defined(CONFIG_SMP) && defined(CONFIG_TREE_RCU)
-# ifdef CONFIG_PREEMPT_COUNT
-	VM_BUG_ON(!in_atomic());
-# endif
-	VM_BUG_ON(page_count(page) == 0);
-	atomic_add(count, &page->_count);
-
-#else
-	if (unlikely(!atomic_add_unless(&page->_count, count, 0)))
-		return 0;
-#endif
-	VM_BUG_ON(PageCompound(page) && page != compound_head(page));
-
-	return 1;
-}
-
-static inline int page_freeze_refs(struct page *page, int count)
-{
-	return likely(atomic_cmpxchg(&page->_count, count, 0) == count);
-}
-
-static inline void page_unfreeze_refs(struct page *page, int count)
-{
-	VM_BUG_ON(page_count(page) != 0);
-	VM_BUG_ON(count == 0);
-
-	atomic_set(&page->_count, count);
-}
-
-#ifdef CONFIG_NUMA
-extern struct page *__page_cache_alloc(gfp_t gfp);
-#else
-static inline struct page *__page_cache_alloc(gfp_t gfp)
-{
-	return alloc_pages(gfp, 0);
-}
-#endif
-
-static inline struct page *page_cache_alloc(struct address_space *x)
-{
-	return __page_cache_alloc(mapping_gfp_mask(x));
-}
-
-static inline struct page *page_cache_alloc_cold(struct address_space *x)
-{
-	return __page_cache_alloc(mapping_gfp_mask(x)|__GFP_COLD);
-}
-
-static inline struct page *page_cache_alloc_readahead(struct address_space *x)
-{
-	return __page_cache_alloc(mapping_gfp_mask(x) |
-				  __GFP_COLD | __GFP_NORETRY | __GFP_NOWARN);
-}
-
-typedef int filler_t(void *, struct page *);
-
-extern struct page * find_get_page(struct address_space *mapping,
-				pgoff_t index);
-extern struct page * find_lock_page(struct address_space *mapping,
-				pgoff_t index);
-extern struct page * find_or_create_page(struct address_space *mapping,
-				pgoff_t index, gfp_t gfp_mask);
-unsigned find_get_pages(struct address_space *mapping, pgoff_t start,
-			unsigned int nr_pages, struct page **pages);
-unsigned find_get_pages_contig(struct address_space *mapping, pgoff_t start,
-			       unsigned int nr_pages, struct page **pages);
-unsigned find_get_pages_tag(struct address_space *mapping, pgoff_t *index,
-			int tag, unsigned int nr_pages, struct page **pages);
-
-struct page *grab_cache_page_write_begin(struct address_space *mapping,
-			pgoff_t index, unsigned flags);
-
-/*
- * Returns locked page at given index in given cache, creating it if needed.
- */
-static inline struct page *grab_cache_page(struct address_space *mapping,
-								pgoff_t index)
-{
-	return find_or_create_page(mapping, index, mapping_gfp_mask(mapping));
-}
-
-extern struct page * grab_cache_page_nowait(struct address_space *mapping,
-				pgoff_t index);
-extern struct page * read_cache_page_async(struct address_space *mapping,
-				pgoff_t index, filler_t *filler, void *data);
-extern struct page * read_cache_page(struct address_space *mapping,
-				pgoff_t index, filler_t *filler, void *data);
-extern struct page * read_cache_page_gfp(struct address_space *mapping,
-				pgoff_t index, gfp_t gfp_mask);
-extern int read_cache_pages(struct address_space *mapping,
-		struct list_head *pages, filler_t *filler, void *data);
-
-static inline struct page *read_mapping_page_async(
-				struct address_space *mapping,
-				pgoff_t index, void *data)
-{
-	filler_t *filler = (filler_t *)mapping->a_ops->readpage;
-	return read_cache_page_async(mapping, index, filler, data);
-}
-
-static inline struct page *read_mapping_page(struct address_space *mapping,
-				pgoff_t index, void *data)
-{
-	filler_t *filler = (filler_t *)mapping->a_ops->readpage;
-	return read_cache_page(mapping, index, filler, data);
-}
-
-/*
- * Return byte-offset into filesystem object for page.
- */
-static inline loff_t page_offset(struct page *page)
-{
-	return ((loff_t)page->index) << PAGE_CACHE_SHIFT;
-}
-
-extern pgoff_t linear_hugepage_index(struct vm_area_struct *vma,
-				     unsigned long address);
-
-static inline pgoff_t linear_page_index(struct vm_area_struct *vma,
-					unsigned long address)
-{
-	pgoff_t pgoff;
-	if (unlikely(is_vm_hugetlb_page(vma)))
-		return linear_hugepage_index(vma, address);
-	pgoff = (address - vma->vm_start) >> PAGE_SHIFT;
-	pgoff += vma->vm_pgoff;
-	return pgoff >> (PAGE_CACHE_SHIFT - PAGE_SHIFT);
-}
-
-extern void __lock_page(struct page *page);
-extern int __lock_page_killable(struct page *page);
-extern int __lock_page_or_retry(struct page *page, struct mm_struct *mm,
-				unsigned int flags);
-extern void unlock_page(struct page *page);
-
-static inline void __set_page_locked(struct page *page)
-{
-	__set_bit(PG_locked, &page->flags);
-}
-
-static inline void __clear_page_locked(struct page *page)
-{
-	__clear_bit(PG_locked, &page->flags);
-}
-
-static inline int trylock_page(struct page *page)
-{
-	return (likely(!test_and_set_bit_lock(PG_locked, &page->flags)));
-}
-
-/*
- * lock_page may only be called if we have the page's inode pinned.
- */
-static inline void lock_page(struct page *page)
-{
-	might_sleep();
-	if (!trylock_page(page))
-		__lock_page(page);
-}
-
-/*
- * lock_page_killable is like lock_page but can be interrupted by fatal
- * signals.  It returns 0 if it locked the page and -EINTR if it was
- * killed while waiting.
- */
-static inline int lock_page_killable(struct page *page)
-{
-	might_sleep();
-	if (!trylock_page(page))
-		return __lock_page_killable(page);
-	return 0;
-}
-
-/*
- * lock_page_or_retry - Lock the page, unless this would block and the
- * caller indicated that it can handle a retry.
- */
-static inline int lock_page_or_retry(struct page *page, struct mm_struct *mm,
-				     unsigned int flags)
-{
-	might_sleep();
-	return trylock_page(page) || __lock_page_or_retry(page, mm, flags);
-}
-
-/*
- * This is exported only for wait_on_page_locked/wait_on_page_writeback.
- * Never use this directly!
- */
-extern void wait_on_page_bit(struct page *page, int bit_nr);
-
-extern int wait_on_page_bit_killable(struct page *page, int bit_nr);
-
-static inline int wait_on_page_locked_killable(struct page *page)
-{
-	if (PageLocked(page))
-		return wait_on_page_bit_killable(page, PG_locked);
-	return 0;
-}
-
-/* 
- * Wait for a page to be unlocked.
- *
- * This must be called with the caller "holding" the page,
- * ie with increased "page->count" so that the page won't
- * go away during the wait..
- */
-static inline void wait_on_page_locked(struct page *page)
-{
-	if (PageLocked(page))
-		wait_on_page_bit(page, PG_locked);
-}
-
-/* 
- * Wait for a page to complete writeback
- */
-static inline void wait_on_page_writeback(struct page *page)
-{
-	if (PageWriteback(page))
-		wait_on_page_bit(page, PG_writeback);
-}
-
-extern void end_page_writeback(struct page *page);
-
-/*
- * Add an arbitrary waiter to a page's wait queue
- */
-extern void add_page_wait_queue(struct page *page, wait_queue_t *waiter);
-
-/*
- * Fault a userspace page into pagetables.  Return non-zero on a fault.
- *
- * This assumes that two userspace pages are always sufficient.  That's
- * not true if PAGE_CACHE_SIZE > PAGE_SIZE.
- */
-static inline int fault_in_pages_writeable(char __user *uaddr, int size)
-{
-	int ret;
-
-	if (unlikely(size == 0))
-		return 0;
-
-	/*
-	 * Writing zeroes into userspace here is OK, because we know that if
-	 * the zero gets there, we'll be overwriting it.
-	 */
-	ret = __put_user(0, uaddr);
-	if (ret == 0) {
-		char __user *end = uaddr + size - 1;
-
-		/*
-		 * If the page was already mapped, this will get a cache miss
-		 * for sure, so try to avoid doing it.
-		 */
-		if (((unsigned long)uaddr & PAGE_MASK) !=
-				((unsigned long)end & PAGE_MASK))
-		 	ret = __put_user(0, end);
-	}
-	return ret;
-}
-
-static inline int fault_in_pages_readable(const char __user *uaddr, int size)
-{
-	volatile char c;
-	int ret;
-
-	if (unlikely(size == 0))
-		return 0;
-
-	ret = __get_user(c, uaddr);
-	if (ret == 0) {
-		const char __user *end = uaddr + size - 1;
-
-		if (((unsigned long)uaddr & PAGE_MASK) !=
-				((unsigned long)end & PAGE_MASK)) {
-		 	ret = __get_user(c, end);
-			(void)c;
-		}
-	}
-	return ret;
-}
-
-int add_to_page_cache_locked(struct page *page, struct address_space *mapping,
-				pgoff_t index, gfp_t gfp_mask);
-int add_to_page_cache_lru(struct page *page, struct address_space *mapping,
-				pgoff_t index, gfp_t gfp_mask);
-extern void delete_from_page_cache(struct page *page);
-extern void __delete_from_page_cache(struct page *page);
-int replace_page_cache_page(struct page *old, struct page *new, gfp_t gfp_mask);
-
-/*
- * Like add_to_page_cache_locked, but used to add newly allocated pages:
- * the page is new, so we can just run __set_page_locked() against it.
- */
-static inline int add_to_page_cache(struct page *page,
-		struct address_space *mapping, pgoff_t offset, gfp_t gfp_mask)
-{
-	int error;
-
-	__set_page_locked(page);
-	error = add_to_page_cache_locked(page, mapping, offset, gfp_mask);
-	if (unlikely(error))
-		__clear_page_locked(page);
-	return error;
-}
-
-#endif /* _LINUX_PAGEMAP_H */
diff --git a/ANDROID_3.4.5/include/linux/pagevec.h b/ANDROID_3.4.5/include/linux/pagevec.h
deleted file mode 100644
index 2aa12b84..00000000
--- a/ANDROID_3.4.5/include/linux/pagevec.h
+++ /dev/null
@@ -1,99 +0,0 @@
-/*
- * include/linux/pagevec.h
- *
- * In many places it is efficient to batch an operation up against multiple
- * pages.  A pagevec is a multipage container which is used for that.
- */
-
-#ifndef _LINUX_PAGEVEC_H
-#define _LINUX_PAGEVEC_H
-
-/* 14 pointers + two long's align the pagevec structure to a power of two */
-#define PAGEVEC_SIZE	14
-
-struct page;
-struct address_space;
-
-struct pagevec {
-	unsigned long nr;
-	unsigned long cold;
-	struct page *pages[PAGEVEC_SIZE];
-};
-
-void __pagevec_release(struct pagevec *pvec);
-void __pagevec_lru_add(struct pagevec *pvec, enum lru_list lru);
-unsigned pagevec_lookup(struct pagevec *pvec, struct address_space *mapping,
-		pgoff_t start, unsigned nr_pages);
-unsigned pagevec_lookup_tag(struct pagevec *pvec,
-		struct address_space *mapping, pgoff_t *index, int tag,
-		unsigned nr_pages);
-
-static inline void pagevec_init(struct pagevec *pvec, int cold)
-{
-	pvec->nr = 0;
-	pvec->cold = cold;
-}
-
-static inline void pagevec_reinit(struct pagevec *pvec)
-{
-	pvec->nr = 0;
-}
-
-static inline unsigned pagevec_count(struct pagevec *pvec)
-{
-	return pvec->nr;
-}
-
-static inline unsigned pagevec_space(struct pagevec *pvec)
-{
-	return PAGEVEC_SIZE - pvec->nr;
-}
-
-/*
- * Add a page to a pagevec.  Returns the number of slots still available.
- */
-static inline unsigned pagevec_add(struct pagevec *pvec, struct page *page)
-{
-	pvec->pages[pvec->nr++] = page;
-	return pagevec_space(pvec);
-}
-
-static inline void pagevec_release(struct pagevec *pvec)
-{
-	if (pagevec_count(pvec))
-		__pagevec_release(pvec);
-}
-
-static inline void __pagevec_lru_add_anon(struct pagevec *pvec)
-{
-	__pagevec_lru_add(pvec, LRU_INACTIVE_ANON);
-}
-
-static inline void __pagevec_lru_add_active_anon(struct pagevec *pvec)
-{
-	__pagevec_lru_add(pvec, LRU_ACTIVE_ANON);
-}
-
-static inline void __pagevec_lru_add_file(struct pagevec *pvec)
-{
-	__pagevec_lru_add(pvec, LRU_INACTIVE_FILE);
-}
-
-static inline void __pagevec_lru_add_active_file(struct pagevec *pvec)
-{
-	__pagevec_lru_add(pvec, LRU_ACTIVE_FILE);
-}
-
-static inline void pagevec_lru_add_file(struct pagevec *pvec)
-{
-	if (pagevec_count(pvec))
-		__pagevec_lru_add_file(pvec);
-}
-
-static inline void pagevec_lru_add_anon(struct pagevec *pvec)
-{
-	if (pagevec_count(pvec))
-		__pagevec_lru_add_anon(pvec);
-}
-
-#endif /* _LINUX_PAGEVEC_H */
diff --git a/ANDROID_3.4.5/include/linux/param.h b/ANDROID_3.4.5/include/linux/param.h
deleted file mode 100644
index 092e92f6..00000000
--- a/ANDROID_3.4.5/include/linux/param.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _LINUX_PARAM_H
-#define _LINUX_PARAM_H
-
-#include <asm/param.h>
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/parport.h b/ANDROID_3.4.5/include/linux/parport.h
deleted file mode 100644
index 106c2ca9..00000000
--- a/ANDROID_3.4.5/include/linux/parport.h
+++ /dev/null
@@ -1,568 +0,0 @@
-/*
- * Any part of this program may be used in documents licensed under
- * the GNU Free Documentation License, Version 1.1 or any later version
- * published by the Free Software Foundation.
- */
-
-#ifndef _PARPORT_H_
-#define _PARPORT_H_
-
-/* Start off with user-visible constants */
-
-/* Maximum of 16 ports per machine */
-#define PARPORT_MAX  16
-
-/* Magic numbers */
-#define PARPORT_IRQ_NONE  -1
-#define PARPORT_DMA_NONE  -1
-#define PARPORT_IRQ_AUTO  -2
-#define PARPORT_DMA_AUTO  -2
-#define PARPORT_DMA_NOFIFO -3
-#define PARPORT_DISABLE   -2
-#define PARPORT_IRQ_PROBEONLY -3
-#define PARPORT_IOHI_AUTO -1
-
-#define PARPORT_CONTROL_STROBE    0x1
-#define PARPORT_CONTROL_AUTOFD    0x2
-#define PARPORT_CONTROL_INIT      0x4
-#define PARPORT_CONTROL_SELECT    0x8
-
-#define PARPORT_STATUS_ERROR      0x8
-#define PARPORT_STATUS_SELECT     0x10
-#define PARPORT_STATUS_PAPEROUT   0x20
-#define PARPORT_STATUS_ACK        0x40
-#define PARPORT_STATUS_BUSY       0x80
-
-/* Type classes for Plug-and-Play probe.  */
-typedef enum {
-	PARPORT_CLASS_LEGACY = 0,       /* Non-IEEE1284 device */
-	PARPORT_CLASS_PRINTER,
-	PARPORT_CLASS_MODEM,
-	PARPORT_CLASS_NET,
-	PARPORT_CLASS_HDC,              /* Hard disk controller */
-	PARPORT_CLASS_PCMCIA,
-	PARPORT_CLASS_MEDIA,            /* Multimedia device */
-	PARPORT_CLASS_FDC,              /* Floppy disk controller */
-	PARPORT_CLASS_PORTS,
-	PARPORT_CLASS_SCANNER,
-	PARPORT_CLASS_DIGCAM,
-	PARPORT_CLASS_OTHER,            /* Anything else */
-	PARPORT_CLASS_UNSPEC,           /* No CLS field in ID */
-	PARPORT_CLASS_SCSIADAPTER
-} parport_device_class;
-
-/* The "modes" entry in parport is a bit field representing the
-   capabilities of the hardware. */
-#define PARPORT_MODE_PCSPP	(1<<0) /* IBM PC registers available. */
-#define PARPORT_MODE_TRISTATE	(1<<1) /* Can tristate. */
-#define PARPORT_MODE_EPP	(1<<2) /* Hardware EPP. */
-#define PARPORT_MODE_ECP	(1<<3) /* Hardware ECP. */
-#define PARPORT_MODE_COMPAT	(1<<4) /* Hardware 'printer protocol'. */
-#define PARPORT_MODE_DMA	(1<<5) /* Hardware can DMA. */
-#define PARPORT_MODE_SAFEININT	(1<<6) /* SPP registers accessible in IRQ. */
-
-/* IEEE1284 modes: 
-   Nibble mode, byte mode, ECP, ECPRLE and EPP are their own
-   'extensibility request' values.  Others are special.
-   'Real' ECP modes must have the IEEE1284_MODE_ECP bit set.  */
-#define IEEE1284_MODE_NIBBLE             0
-#define IEEE1284_MODE_BYTE              (1<<0)
-#define IEEE1284_MODE_COMPAT            (1<<8)
-#define IEEE1284_MODE_BECP              (1<<9) /* Bounded ECP mode */
-#define IEEE1284_MODE_ECP               (1<<4)
-#define IEEE1284_MODE_ECPRLE            (IEEE1284_MODE_ECP | (1<<5))
-#define IEEE1284_MODE_ECPSWE            (1<<10) /* Software-emulated */
-#define IEEE1284_MODE_EPP               (1<<6)
-#define IEEE1284_MODE_EPPSL             (1<<11) /* EPP 1.7 */
-#define IEEE1284_MODE_EPPSWE            (1<<12) /* Software-emulated */
-#define IEEE1284_DEVICEID               (1<<2)  /* This is a flag */
-#define IEEE1284_EXT_LINK               (1<<14) /* This flag causes the
-						 * extensibility link to
-						 * be requested, using
-						 * bits 0-6. */
-
-/* For the benefit of parport_read/write, you can use these with
- * parport_negotiate to use address operations.  They have no effect
- * other than to make parport_read/write use address transfers. */
-#define IEEE1284_ADDR			(1<<13)	/* This is a flag */
-#define IEEE1284_DATA			 0	/* So is this */
-
-/* Flags for block transfer operations. */
-#define PARPORT_EPP_FAST		(1<<0) /* Unreliable counts. */
-#define PARPORT_W91284PIC		(1<<1) /* have a Warp9 w91284pic in the device */
-
-/* The rest is for the kernel only */
-#ifdef __KERNEL__
-
-#include <linux/jiffies.h>
-#include <linux/proc_fs.h>
-#include <linux/spinlock.h>
-#include <linux/wait.h>
-#include <linux/irqreturn.h>
-#include <linux/semaphore.h>
-#include <asm/ptrace.h>
-
-/* Define this later. */
-struct parport;
-struct pardevice;
-
-struct pc_parport_state {
-	unsigned int ctr;
-	unsigned int ecr;
-};
-
-struct ax_parport_state {
-	unsigned int ctr;
-	unsigned int ecr;
-	unsigned int dcsr;
-};
-
-/* used by both parport_amiga and parport_mfc3 */
-struct amiga_parport_state {
-       unsigned char data;     /* ciaa.prb */
-       unsigned char datadir;  /* ciaa.ddrb */
-       unsigned char status;   /* ciab.pra & 7 */
-       unsigned char statusdir;/* ciab.ddrb & 7 */
-};
-
-struct ax88796_parport_state {
-	unsigned char cpr;
-};
-
-struct ip32_parport_state {
-	unsigned int dcr;
-	unsigned int ecr;
-};
-
-struct parport_state {
-	union {
-		struct pc_parport_state pc;
-		/* ARC has no state. */
-		struct ax_parport_state ax;
-		struct amiga_parport_state amiga;
-		struct ax88796_parport_state ax88796;
-		/* Atari has not state. */
-		struct ip32_parport_state ip32;
-		void *misc; 
-	} u;
-};
-
-struct parport_operations {
-	/* IBM PC-style virtual registers. */
-	void (*write_data)(struct parport *, unsigned char);
-	unsigned char (*read_data)(struct parport *);
-
-	void (*write_control)(struct parport *, unsigned char);
-	unsigned char (*read_control)(struct parport *);
-	unsigned char (*frob_control)(struct parport *, unsigned char mask,
-				      unsigned char val);
-
-	unsigned char (*read_status)(struct parport *);
-
-	/* IRQs. */
-	void (*enable_irq)(struct parport *);
-	void (*disable_irq)(struct parport *);
-
-	/* Data direction. */
-	void (*data_forward) (struct parport *);
-	void (*data_reverse) (struct parport *);
-
-	/* For core parport code. */
-	void (*init_state)(struct pardevice *, struct parport_state *);
-	void (*save_state)(struct parport *, struct parport_state *);
-	void (*restore_state)(struct parport *, struct parport_state *);
-
-	/* Block read/write */
-	size_t (*epp_write_data) (struct parport *port, const void *buf,
-				  size_t len, int flags);
-	size_t (*epp_read_data) (struct parport *port, void *buf, size_t len,
-				 int flags);
-	size_t (*epp_write_addr) (struct parport *port, const void *buf,
-				  size_t len, int flags);
-	size_t (*epp_read_addr) (struct parport *port, void *buf, size_t len,
-				 int flags);
-
-	size_t (*ecp_write_data) (struct parport *port, const void *buf,
-				  size_t len, int flags);
-	size_t (*ecp_read_data) (struct parport *port, void *buf, size_t len,
-				 int flags);
-	size_t (*ecp_write_addr) (struct parport *port, const void *buf,
-				  size_t len, int flags);
-
-	size_t (*compat_write_data) (struct parport *port, const void *buf,
-				     size_t len, int flags);
-	size_t (*nibble_read_data) (struct parport *port, void *buf,
-				    size_t len, int flags);
-	size_t (*byte_read_data) (struct parport *port, void *buf,
-				  size_t len, int flags);
-	struct module *owner;
-};
-
-struct parport_device_info {
-	parport_device_class class;
-	const char *class_name;
-	const char *mfr;
-	const char *model;
-	const char *cmdset;
-	const char *description;
-};
-
-/* Each device can have two callback functions:
- *  1) a preemption function, called by the resource manager to request
- *     that the driver relinquish control of the port.  The driver should
- *     return zero if it agrees to release the port, and nonzero if it 
- *     refuses.  Do not call parport_release() - the kernel will do this
- *     implicitly.
- *
- *  2) a wake-up function, called by the resource manager to tell drivers
- *     that the port is available to be claimed.  If a driver wants to use
- *     the port, it should call parport_claim() here.
- */
-
-/* A parallel port device */
-struct pardevice {
-	const char *name;
-	struct parport *port;
-	int daisy;
-	int (*preempt)(void *);
-	void (*wakeup)(void *);
-	void *private;
-	void (*irq_func)(void *);
-	unsigned int flags;
-	struct pardevice *next;
-	struct pardevice *prev;
-	struct parport_state *state;     /* saved status over preemption */
-	wait_queue_head_t wait_q;
-	unsigned long int time;
-	unsigned long int timeslice;
-	volatile long int timeout;
-	unsigned long waiting;		 /* long req'd for set_bit --RR */
-	struct pardevice *waitprev;
-	struct pardevice *waitnext;
-	void * sysctl_table;
-};
-
-/* IEEE1284 information */
-
-/* IEEE1284 phases. These are exposed to userland through ppdev IOCTL
- * PP[GS]ETPHASE, so do not change existing values. */
-enum ieee1284_phase {
-	IEEE1284_PH_FWD_DATA,
-	IEEE1284_PH_FWD_IDLE,
-	IEEE1284_PH_TERMINATE,
-	IEEE1284_PH_NEGOTIATION,
-	IEEE1284_PH_HBUSY_DNA,
-	IEEE1284_PH_REV_IDLE,
-	IEEE1284_PH_HBUSY_DAVAIL,
-	IEEE1284_PH_REV_DATA,
-	IEEE1284_PH_ECP_SETUP,
-	IEEE1284_PH_ECP_FWD_TO_REV,
-	IEEE1284_PH_ECP_REV_TO_FWD,
-	IEEE1284_PH_ECP_DIR_UNKNOWN,
-};
-struct ieee1284_info {
-	int mode;
-	volatile enum ieee1284_phase phase;
-	struct semaphore irq;
-};
-
-/* A parallel port */
-struct parport {
-	unsigned long base;	/* base address */
-	unsigned long base_hi;  /* base address (hi - ECR) */
-	unsigned int size;	/* IO extent */
-	const char *name;
-	unsigned int modes;
-	int irq;		/* interrupt (or -1 for none) */
-	int dma;
-	int muxport;		/* which muxport (if any) this is */
-	int portnum;		/* which physical parallel port (not mux) */
-	struct device *dev;	/* Physical device associated with IO/DMA.
-				 * This may unfortulately be null if the
-				 * port has a legacy driver.
-				 */
-
-	struct parport *physport;
-				/* If this is a non-default mux
-				   parport, i.e. we're a clone of a real
-				   physical port, this is a pointer to that
-				   port. The locking is only done in the
-				   real port.  For a clone port, the
-				   following structure members are
-				   meaningless: devices, cad, muxsel,
-				   waithead, waittail, flags, pdir,
-				   dev, ieee1284, *_lock.
-
-				   It this is a default mux parport, or
-				   there is no mux involved, this points to
-				   ourself. */
-
-	struct pardevice *devices;
-	struct pardevice *cad;	/* port owner */
-	int daisy;		/* currently selected daisy addr */
-	int muxsel;		/* currently selected mux port */
-
-	struct pardevice *waithead;
-	struct pardevice *waittail;
-
-	struct list_head list;
-	unsigned int flags;
-
-	void *sysctl_table;
-	struct parport_device_info probe_info[5]; /* 0-3 + non-IEEE1284.3 */
-	struct ieee1284_info ieee1284;
-
-	struct parport_operations *ops;
-	void *private_data;     /* for lowlevel driver */
-
-	int number;		/* port index - the `n' in `parportn' */
-	spinlock_t pardevice_lock;
-	spinlock_t waitlist_lock;
-	rwlock_t cad_lock;
-
-	int spintime;
-	atomic_t ref_count;
-
-	unsigned long devflags;
-#define PARPORT_DEVPROC_REGISTERED	0
-	struct pardevice *proc_device;	/* Currently register proc device */
-
-	struct list_head full_list;
-	struct parport *slaves[3];
-};
-
-#define DEFAULT_SPIN_TIME 500 /* us */
-
-struct parport_driver {
-	const char *name;
-	void (*attach) (struct parport *);
-	void (*detach) (struct parport *);
-	struct list_head list;
-};
-
-/* parport_register_port registers a new parallel port at the given
-   address (if one does not already exist) and returns a pointer to it.
-   This entails claiming the I/O region, IRQ and DMA.  NULL is returned
-   if initialisation fails. */
-struct parport *parport_register_port(unsigned long base, int irq, int dma,
-				      struct parport_operations *ops);
-
-/* Once a registered port is ready for high-level drivers to use, the
-   low-level driver that registered it should announce it.  This will
-   call the high-level drivers' attach() functions (after things like
-   determining the IEEE 1284.3 topology of the port and collecting
-   DeviceIDs). */
-void parport_announce_port (struct parport *port);
-
-/* Unregister a port. */
-extern void parport_remove_port(struct parport *port);
-
-/* Register a new high-level driver. */
-extern int parport_register_driver (struct parport_driver *);
-
-/* Unregister a high-level driver. */
-extern void parport_unregister_driver (struct parport_driver *);
-
-/* If parport_register_driver doesn't fit your needs, perhaps
- * parport_find_xxx does. */
-extern struct parport *parport_find_number (int);
-extern struct parport *parport_find_base (unsigned long);
-
-/* generic irq handler, if it suits your needs */
-extern irqreturn_t parport_irq_handler(int irq, void *dev_id);
-
-/* Reference counting for ports. */
-extern struct parport *parport_get_port (struct parport *);
-extern void parport_put_port (struct parport *);
-
-/* parport_register_device declares that a device is connected to a
-   port, and tells the kernel all it needs to know.
-   - pf is the preemption function (may be NULL for no callback)
-   - kf is the wake-up function (may be NULL for no callback)
-   - irq_func is the interrupt handler (may be NULL for no interrupts)
-   - handle is a user pointer that gets handed to callback functions.  */
-struct pardevice *parport_register_device(struct parport *port, 
-			  const char *name,
-			  int (*pf)(void *), void (*kf)(void *),
-			  void (*irq_func)(void *), 
-			  int flags, void *handle);
-
-/* parport_unregister unlinks a device from the chain. */
-extern void parport_unregister_device(struct pardevice *dev);
-
-/* parport_claim tries to gain ownership of the port for a particular
-   driver.  This may fail (return non-zero) if another driver is busy.
-   If this driver has registered an interrupt handler, it will be
-   enabled.  */
-extern int parport_claim(struct pardevice *dev);
-
-/* parport_claim_or_block is the same, but sleeps if the port cannot
-   be claimed.  Return value is 1 if it slept, 0 normally and -errno
-   on error.  */
-extern int parport_claim_or_block(struct pardevice *dev);
-
-/* parport_release reverses a previous parport_claim.  This can never
-   fail, though the effects are undefined (except that they are bad)
-   if you didn't previously own the port.  Once you have released the
-   port you should make sure that neither your code nor the hardware
-   on the port tries to initiate any communication without first
-   re-claiming the port.  If you mess with the port state (enabling
-   ECP for example) you should clean up before releasing the port. */
-
-extern void parport_release(struct pardevice *dev);
-
-/**
- * parport_yield - relinquish a parallel port temporarily
- * @dev: a device on the parallel port
- *
- * This function relinquishes the port if it would be helpful to other
- * drivers to do so.  Afterwards it tries to reclaim the port using
- * parport_claim(), and the return value is the same as for
- * parport_claim().  If it fails, the port is left unclaimed and it is
- * the driver's responsibility to reclaim the port.
- *
- * The parport_yield() and parport_yield_blocking() functions are for
- * marking points in the driver at which other drivers may claim the
- * port and use their devices.  Yielding the port is similar to
- * releasing it and reclaiming it, but is more efficient because no
- * action is taken if there are no other devices needing the port.  In
- * fact, nothing is done even if there are other devices waiting but
- * the current device is still within its "timeslice".  The default
- * timeslice is half a second, but it can be adjusted via the /proc
- * interface.
- **/
-static __inline__ int parport_yield(struct pardevice *dev)
-{
-	unsigned long int timeslip = (jiffies - dev->time);
-	if ((dev->port->waithead == NULL) || (timeslip < dev->timeslice))
-		return 0;
-	parport_release(dev);
-	return parport_claim(dev);
-}
-
-/**
- * parport_yield_blocking - relinquish a parallel port temporarily
- * @dev: a device on the parallel port
- *
- * This function relinquishes the port if it would be helpful to other
- * drivers to do so.  Afterwards it tries to reclaim the port using
- * parport_claim_or_block(), and the return value is the same as for
- * parport_claim_or_block().
- **/
-static __inline__ int parport_yield_blocking(struct pardevice *dev)
-{
-	unsigned long int timeslip = (jiffies - dev->time);
-	if ((dev->port->waithead == NULL) || (timeslip < dev->timeslice))
-		return 0;
-	parport_release(dev);
-	return parport_claim_or_block(dev);
-}
-
-/* Flags used to identify what a device does. */
-#define PARPORT_DEV_TRAN		0	/* WARNING !! DEPRECATED !! */
-#define PARPORT_DEV_LURK		(1<<0)	/* WARNING !! DEPRECATED !! */
-#define PARPORT_DEV_EXCL		(1<<1)	/* Need exclusive access. */
-
-#define PARPORT_FLAG_EXCL		(1<<1)	/* EXCL driver registered. */
-
-/* IEEE1284 functions */
-extern void parport_ieee1284_interrupt (void *);
-extern int parport_negotiate (struct parport *, int mode);
-extern ssize_t parport_write (struct parport *, const void *buf, size_t len);
-extern ssize_t parport_read (struct parport *, void *buf, size_t len);
-
-#define PARPORT_INACTIVITY_O_NONBLOCK 1
-extern long parport_set_timeout (struct pardevice *, long inactivity);
-
-extern int parport_wait_event (struct parport *, long timeout);
-extern int parport_wait_peripheral (struct parport *port,
-				    unsigned char mask,
-				    unsigned char val);
-extern int parport_poll_peripheral (struct parport *port,
-				    unsigned char mask,
-				    unsigned char val,
-				    int usec);
-
-/* For architectural drivers */
-extern size_t parport_ieee1284_write_compat (struct parport *,
-					     const void *, size_t, int);
-extern size_t parport_ieee1284_read_nibble (struct parport *,
-					    void *, size_t, int);
-extern size_t parport_ieee1284_read_byte (struct parport *,
-					  void *, size_t, int);
-extern size_t parport_ieee1284_ecp_read_data (struct parport *,
-					      void *, size_t, int);
-extern size_t parport_ieee1284_ecp_write_data (struct parport *,
-					       const void *, size_t, int);
-extern size_t parport_ieee1284_ecp_write_addr (struct parport *,
-					       const void *, size_t, int);
-extern size_t parport_ieee1284_epp_write_data (struct parport *,
-					       const void *, size_t, int);
-extern size_t parport_ieee1284_epp_read_data (struct parport *,
-					      void *, size_t, int);
-extern size_t parport_ieee1284_epp_write_addr (struct parport *,
-					       const void *, size_t, int);
-extern size_t parport_ieee1284_epp_read_addr (struct parport *,
-					      void *, size_t, int);
-
-/* IEEE1284.3 functions */
-extern int parport_daisy_init (struct parport *port);
-extern void parport_daisy_fini (struct parport *port);
-extern struct pardevice *parport_open (int devnum, const char *name);
-extern void parport_close (struct pardevice *dev);
-extern ssize_t parport_device_id (int devnum, char *buffer, size_t len);
-extern void parport_daisy_deselect_all (struct parport *port);
-extern int parport_daisy_select (struct parport *port, int daisy, int mode);
-
-/* Lowlevel drivers _can_ call this support function to handle irqs.  */
-static inline void parport_generic_irq(struct parport *port)
-{
-	parport_ieee1284_interrupt (port);
-	read_lock(&port->cad_lock);
-	if (port->cad && port->cad->irq_func)
-		port->cad->irq_func(port->cad->private);
-	read_unlock(&port->cad_lock);
-}
-
-/* Prototypes from parport_procfs */
-extern int parport_proc_register(struct parport *pp);
-extern int parport_proc_unregister(struct parport *pp);
-extern int parport_device_proc_register(struct pardevice *device);
-extern int parport_device_proc_unregister(struct pardevice *device);
-
-/* If PC hardware is the only type supported, we can optimise a bit.  */
-#if !defined(CONFIG_PARPORT_NOT_PC)
-
-#include <linux/parport_pc.h>
-#define parport_write_data(p,x)            parport_pc_write_data(p,x)
-#define parport_read_data(p)               parport_pc_read_data(p)
-#define parport_write_control(p,x)         parport_pc_write_control(p,x)
-#define parport_read_control(p)            parport_pc_read_control(p)
-#define parport_frob_control(p,m,v)        parport_pc_frob_control(p,m,v)
-#define parport_read_status(p)             parport_pc_read_status(p)
-#define parport_enable_irq(p)              parport_pc_enable_irq(p)
-#define parport_disable_irq(p)             parport_pc_disable_irq(p)
-#define parport_data_forward(p)            parport_pc_data_forward(p)
-#define parport_data_reverse(p)            parport_pc_data_reverse(p)
-
-#else  /*  !CONFIG_PARPORT_NOT_PC  */
-
-/* Generic operations vector through the dispatch table. */
-#define parport_write_data(p,x)            (p)->ops->write_data(p,x)
-#define parport_read_data(p)               (p)->ops->read_data(p)
-#define parport_write_control(p,x)         (p)->ops->write_control(p,x)
-#define parport_read_control(p)            (p)->ops->read_control(p)
-#define parport_frob_control(p,m,v)        (p)->ops->frob_control(p,m,v)
-#define parport_read_status(p)             (p)->ops->read_status(p)
-#define parport_enable_irq(p)              (p)->ops->enable_irq(p)
-#define parport_disable_irq(p)             (p)->ops->disable_irq(p)
-#define parport_data_forward(p)            (p)->ops->data_forward(p)
-#define parport_data_reverse(p)            (p)->ops->data_reverse(p)
-
-#endif /*  !CONFIG_PARPORT_NOT_PC  */
-
-extern unsigned long parport_default_timeslice;
-extern int parport_default_spintime;
-
-#endif /* __KERNEL__ */
-#endif /* _PARPORT_H_ */
diff --git a/ANDROID_3.4.5/include/linux/parport_pc.h b/ANDROID_3.4.5/include/linux/parport_pc.h
deleted file mode 100644
index cc1767f5..00000000
--- a/ANDROID_3.4.5/include/linux/parport_pc.h
+++ /dev/null
@@ -1,238 +0,0 @@
-#ifndef __LINUX_PARPORT_PC_H
-#define __LINUX_PARPORT_PC_H
-
-#include <asm/io.h>
-
-/* --- register definitions ------------------------------- */
-
-#define ECONTROL(p) ((p)->base_hi + 0x2)
-#define CONFIGB(p)  ((p)->base_hi + 0x1)
-#define CONFIGA(p)  ((p)->base_hi + 0x0)
-#define FIFO(p)     ((p)->base_hi + 0x0)
-#define EPPDATA(p)  ((p)->base    + 0x4)
-#define EPPADDR(p)  ((p)->base    + 0x3)
-#define CONTROL(p)  ((p)->base    + 0x2)
-#define STATUS(p)   ((p)->base    + 0x1)
-#define DATA(p)     ((p)->base    + 0x0)
-
-struct parport_pc_private {
-	/* Contents of CTR. */
-	unsigned char ctr;
-
-	/* Bitmask of writable CTR bits. */
-	unsigned char ctr_writable;
-
-	/* Whether or not there's an ECR. */
-	int ecr;
-
-	/* Number of PWords that FIFO will hold. */
-	int fifo_depth;
-
-	/* Number of bytes per portword. */
-	int pword;
-
-	/* Not used yet. */
-	int readIntrThreshold;
-	int writeIntrThreshold;
-
-	/* buffer suitable for DMA, if DMA enabled */
-	char *dma_buf;
-	dma_addr_t dma_handle;
-	struct list_head list;
-	struct parport *port;
-};
-
-struct parport_pc_via_data
-{
-	/* ISA PnP IRQ routing register 1 */
-	u8 via_pci_parport_irq_reg;
-	/* ISA PnP DMA request routing register */
-	u8 via_pci_parport_dma_reg;
-	/* Register and value to enable SuperIO configuration access */
-	u8 via_pci_superio_config_reg;
-	u8 via_pci_superio_config_data;
-	/* SuperIO function register number */
-	u8 viacfg_function;
-	/* parallel port control register number */
-	u8 viacfg_parport_control;
-	/* Parallel port base address register */
-	u8 viacfg_parport_base;
-};
-
-static __inline__ void parport_pc_write_data(struct parport *p, unsigned char d)
-{
-#ifdef DEBUG_PARPORT
-	printk (KERN_DEBUG "parport_pc_write_data(%p,0x%02x)\n", p, d);
-#endif
-	outb(d, DATA(p));
-}
-
-static __inline__ unsigned char parport_pc_read_data(struct parport *p)
-{
-	unsigned char val = inb (DATA (p));
-#ifdef DEBUG_PARPORT
-	printk (KERN_DEBUG "parport_pc_read_data(%p) = 0x%02x\n",
-		p, val);
-#endif
-	return val;
-}
-
-#ifdef DEBUG_PARPORT
-static inline void dump_parport_state (char *str, struct parport *p)
-{
-	/* here's hoping that reading these ports won't side-effect anything underneath */
-	unsigned char ecr = inb (ECONTROL (p));
-	unsigned char dcr = inb (CONTROL (p));
-	unsigned char dsr = inb (STATUS (p));
-	static const char *const ecr_modes[] = {"SPP", "PS2", "PPFIFO", "ECP", "xXx", "yYy", "TST", "CFG"};
-	const struct parport_pc_private *priv = p->physport->private_data;
-	int i;
-
-	printk (KERN_DEBUG "*** parport state (%s): ecr=[%s", str, ecr_modes[(ecr & 0xe0) >> 5]);
-	if (ecr & 0x10) printk (",nErrIntrEn");
-	if (ecr & 0x08) printk (",dmaEn");
-	if (ecr & 0x04) printk (",serviceIntr");
-	if (ecr & 0x02) printk (",f_full");
-	if (ecr & 0x01) printk (",f_empty");
-	for (i=0; i<2; i++) {
-		printk ("]  dcr(%s)=[", i ? "soft" : "hard");
-		dcr = i ? priv->ctr : inb (CONTROL (p));
-	
-		if (dcr & 0x20) {
-			printk ("rev");
-		} else {
-			printk ("fwd");
-		}
-		if (dcr & 0x10) printk (",ackIntEn");
-		if (!(dcr & 0x08)) printk (",N-SELECT-IN");
-		if (dcr & 0x04) printk (",N-INIT");
-		if (!(dcr & 0x02)) printk (",N-AUTOFD");
-		if (!(dcr & 0x01)) printk (",N-STROBE");
-	}
-	printk ("]  dsr=[");
-	if (!(dsr & 0x80)) printk ("BUSY");
-	if (dsr & 0x40) printk (",N-ACK");
-	if (dsr & 0x20) printk (",PERROR");
-	if (dsr & 0x10) printk (",SELECT");
-	if (dsr & 0x08) printk (",N-FAULT");
-	printk ("]\n");
-	return;
-}
-#else	/* !DEBUG_PARPORT */
-#define dump_parport_state(args...)
-#endif	/* !DEBUG_PARPORT */
-
-/* __parport_pc_frob_control differs from parport_pc_frob_control in that
- * it doesn't do any extra masking. */
-static __inline__ unsigned char __parport_pc_frob_control (struct parport *p,
-							   unsigned char mask,
-							   unsigned char val)
-{
-	struct parport_pc_private *priv = p->physport->private_data;
-	unsigned char ctr = priv->ctr;
-#ifdef DEBUG_PARPORT
-	printk (KERN_DEBUG
-		"__parport_pc_frob_control(%02x,%02x): %02x -> %02x\n",
-		mask, val, ctr, ((ctr & ~mask) ^ val) & priv->ctr_writable);
-#endif
-	ctr = (ctr & ~mask) ^ val;
-	ctr &= priv->ctr_writable; /* only write writable bits. */
-	outb (ctr, CONTROL (p));
-	priv->ctr = ctr;	/* Update soft copy */
-	return ctr;
-}
-
-static __inline__ void parport_pc_data_reverse (struct parport *p)
-{
-	__parport_pc_frob_control (p, 0x20, 0x20);
-}
-
-static __inline__ void parport_pc_data_forward (struct parport *p)
-{
-	__parport_pc_frob_control (p, 0x20, 0x00);
-}
-
-static __inline__ void parport_pc_write_control (struct parport *p,
-						 unsigned char d)
-{
-	const unsigned char wm = (PARPORT_CONTROL_STROBE |
-				  PARPORT_CONTROL_AUTOFD |
-				  PARPORT_CONTROL_INIT |
-				  PARPORT_CONTROL_SELECT);
-
-	/* Take this out when drivers have adapted to newer interface. */
-	if (d & 0x20) {
-		printk (KERN_DEBUG "%s (%s): use data_reverse for this!\n",
-			p->name, p->cad->name);
-		parport_pc_data_reverse (p);
-	}
-
-	__parport_pc_frob_control (p, wm, d & wm);
-}
-
-static __inline__ unsigned char parport_pc_read_control(struct parport *p)
-{
-	const unsigned char rm = (PARPORT_CONTROL_STROBE |
-				  PARPORT_CONTROL_AUTOFD |
-				  PARPORT_CONTROL_INIT |
-				  PARPORT_CONTROL_SELECT);
-	const struct parport_pc_private *priv = p->physport->private_data;
-	return priv->ctr & rm; /* Use soft copy */
-}
-
-static __inline__ unsigned char parport_pc_frob_control (struct parport *p,
-							 unsigned char mask,
-							 unsigned char val)
-{
-	const unsigned char wm = (PARPORT_CONTROL_STROBE |
-				  PARPORT_CONTROL_AUTOFD |
-				  PARPORT_CONTROL_INIT |
-				  PARPORT_CONTROL_SELECT);
-
-	/* Take this out when drivers have adapted to newer interface. */
-	if (mask & 0x20) {
-		printk (KERN_DEBUG "%s (%s): use data_%s for this!\n",
-			p->name, p->cad->name,
-			(val & 0x20) ? "reverse" : "forward");
-		if (val & 0x20)
-			parport_pc_data_reverse (p);
-		else
-			parport_pc_data_forward (p);
-	}
-
-	/* Restrict mask and val to control lines. */
-	mask &= wm;
-	val &= wm;
-
-	return __parport_pc_frob_control (p, mask, val);
-}
-
-static __inline__ unsigned char parport_pc_read_status(struct parport *p)
-{
-	return inb(STATUS(p));
-}
-
-
-static __inline__ void parport_pc_disable_irq(struct parport *p)
-{
-	__parport_pc_frob_control (p, 0x10, 0x00);
-}
-
-static __inline__ void parport_pc_enable_irq(struct parport *p)
-{
-	__parport_pc_frob_control (p, 0x10, 0x10);
-}
-
-extern void parport_pc_release_resources(struct parport *p);
-
-extern int parport_pc_claim_resources(struct parport *p);
-
-/* PCMCIA code will want to get us to look at a port.  Provide a mechanism. */
-extern struct parport *parport_pc_probe_port(unsigned long base,
-					     unsigned long base_hi,
-					     int irq, int dma,
-					     struct device *dev,
-					     int irqflags);
-extern void parport_pc_unregister_port(struct parport *p);
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/parser.h b/ANDROID_3.4.5/include/linux/parser.h
deleted file mode 100644
index ea2281e7..00000000
--- a/ANDROID_3.4.5/include/linux/parser.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * linux/include/linux/parser.h
- *
- * Header for lib/parser.c
- * Intended use of these functions is parsing filesystem argument lists,
- * but could potentially be used anywhere else that simple option=arg
- * parsing is required.
- */
-
-
-/* associates an integer enumerator with a pattern string. */
-struct match_token {
-	int token;
-	const char *pattern;
-};
-
-typedef struct match_token match_table_t[];
-
-/* Maximum number of arguments that match_token will find in a pattern */
-enum {MAX_OPT_ARGS = 3};
-
-/* Describe the location within a string of a substring */
-typedef struct {
-	char *from;
-	char *to;
-} substring_t;
-
-int match_token(char *, const match_table_t table, substring_t args[]);
-int match_int(substring_t *, int *result);
-int match_octal(substring_t *, int *result);
-int match_hex(substring_t *, int *result);
-size_t match_strlcpy(char *, const substring_t *, size_t);
-char *match_strdup(const substring_t *);
diff --git a/ANDROID_3.4.5/include/linux/pata_arasan_cf_data.h b/ANDROID_3.4.5/include/linux/pata_arasan_cf_data.h
deleted file mode 100644
index a6ee9aa8..00000000
--- a/ANDROID_3.4.5/include/linux/pata_arasan_cf_data.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- * include/linux/pata_arasan_cf_data.h
- *
- * Arasan Compact Flash host controller platform data header file
- *
- * Copyright (C) 2011 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef _PATA_ARASAN_CF_DATA_H
-#define _PATA_ARASAN_CF_DATA_H
-
-#include <linux/platform_device.h>
-
-struct arasan_cf_pdata {
-	u8 cf_if_clk;
-	#define CF_IF_CLK_100M			(0x0)
-	#define CF_IF_CLK_75M			(0x1)
-	#define CF_IF_CLK_66M			(0x2)
-	#define CF_IF_CLK_50M			(0x3)
-	#define CF_IF_CLK_40M			(0x4)
-	#define CF_IF_CLK_33M			(0x5)
-	#define CF_IF_CLK_25M			(0x6)
-	#define CF_IF_CLK_125M			(0x7)
-	#define CF_IF_CLK_150M			(0x8)
-	#define CF_IF_CLK_166M			(0x9)
-	#define CF_IF_CLK_200M			(0xA)
-	/*
-	 * Platform specific incapabilities of CF controller is handled via
-	 * quirks
-	 */
-	u32 quirk;
-	#define CF_BROKEN_PIO			(1)
-	#define CF_BROKEN_MWDMA			(1 << 1)
-	#define CF_BROKEN_UDMA			(1 << 2)
-	/* This is platform specific data for the DMA controller */
-	void *dma_priv;
-};
-
-static inline void
-set_arasan_cf_pdata(struct platform_device *pdev, struct arasan_cf_pdata *data)
-{
-	pdev->dev.platform_data = data;
-}
-#endif /* _PATA_ARASAN_CF_DATA_H */
diff --git a/ANDROID_3.4.5/include/linux/patchkey.h b/ANDROID_3.4.5/include/linux/patchkey.h
deleted file mode 100644
index aefda0ec..00000000
--- a/ANDROID_3.4.5/include/linux/patchkey.h
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- * <linux/patchkey.h> -- definition of _PATCHKEY macro
- *
- * Copyright (C) 2005 Stuart Brady
- *
- * This exists because awe_voice.h defined its own _PATCHKEY and it wasn't
- * clear whether removing this would break anything in userspace.
- *
- * Do not include this file directly.  Please use <sys/soundcard.h> instead.
- * For kernel code, use <linux/soundcard.h>
- */
-
-#ifndef _LINUX_PATCHKEY_H_INDIRECT
-#error "patchkey.h included directly"
-#endif
-
-#ifndef _LINUX_PATCHKEY_H
-#define _LINUX_PATCHKEY_H
-
-/* Endian macros. */
-#ifdef __KERNEL__
-#  include <asm/byteorder.h>
-#else
-#  include <endian.h>
-#endif
-
-#if defined(__KERNEL__)
-#  if defined(__BIG_ENDIAN)
-#    define _PATCHKEY(id) (0xfd00|id)
-#  elif defined(__LITTLE_ENDIAN)
-#    define _PATCHKEY(id) ((id<<8)|0x00fd)
-#  else
-#    error "could not determine byte order"
-#  endif
-#else
-#if defined(__BYTE_ORDER)
-#  if __BYTE_ORDER == __BIG_ENDIAN
-#    define _PATCHKEY(id) (0xfd00|id)
-#  elif __BYTE_ORDER == __LITTLE_ENDIAN
-#    define _PATCHKEY(id) ((id<<8)|0x00fd)
-#  else
-#    error "could not determine byte order"
-#  endif
-#endif
-#endif
-
-#endif /* _LINUX_PATCHKEY_H */
diff --git a/ANDROID_3.4.5/include/linux/path.h b/ANDROID_3.4.5/include/linux/path.h
deleted file mode 100644
index edc98dec..00000000
--- a/ANDROID_3.4.5/include/linux/path.h
+++ /dev/null
@@ -1,20 +0,0 @@
-#ifndef _LINUX_PATH_H
-#define _LINUX_PATH_H
-
-struct dentry;
-struct vfsmount;
-
-struct path {
-	struct vfsmount *mnt;
-	struct dentry *dentry;
-};
-
-extern void path_get(struct path *);
-extern void path_put(struct path *);
-
-static inline int path_equal(const struct path *path1, const struct path *path2)
-{
-	return path1->mnt == path2->mnt && path1->dentry == path2->dentry;
-}
-
-#endif  /* _LINUX_PATH_H */
diff --git a/ANDROID_3.4.5/include/linux/pch_dma.h b/ANDROID_3.4.5/include/linux/pch_dma.h
deleted file mode 100644
index fdafe529..00000000
--- a/ANDROID_3.4.5/include/linux/pch_dma.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * Copyright (c) 2010 Intel Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef PCH_DMA_H
-#define PCH_DMA_H
-
-#include <linux/dmaengine.h>
-
-enum pch_dma_width {
-	PCH_DMA_WIDTH_1_BYTE,
-	PCH_DMA_WIDTH_2_BYTES,
-	PCH_DMA_WIDTH_4_BYTES,
-};
-
-struct pch_dma_slave {
-	struct device		*dma_dev;
-	unsigned int		chan_id;
-	dma_addr_t		tx_reg;
-	dma_addr_t		rx_reg;
-	enum pch_dma_width	width;
-};
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/pci-acpi.h b/ANDROID_3.4.5/include/linux/pci-acpi.h
deleted file mode 100644
index 44623500..00000000
--- a/ANDROID_3.4.5/include/linux/pci-acpi.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- * File		pci-acpi.h
- *
- * Copyright (C) 2004 Intel
- * Copyright (C) Tom Long Nguyen (tom.l.nguyen@intel.com)
- */
-
-#ifndef _PCI_ACPI_H_
-#define _PCI_ACPI_H_
-
-#include <linux/acpi.h>
-
-#ifdef CONFIG_ACPI
-extern acpi_status pci_acpi_add_bus_pm_notifier(struct acpi_device *dev,
-						 struct pci_bus *pci_bus);
-extern acpi_status pci_acpi_remove_bus_pm_notifier(struct acpi_device *dev);
-extern acpi_status pci_acpi_add_pm_notifier(struct acpi_device *dev,
-					     struct pci_dev *pci_dev);
-extern acpi_status pci_acpi_remove_pm_notifier(struct acpi_device *dev);
-
-static inline acpi_handle acpi_find_root_bridge_handle(struct pci_dev *pdev)
-{
-	struct pci_bus *pbus = pdev->bus;
-	/* Find a PCI root bus */
-	while (!pci_is_root_bus(pbus))
-		pbus = pbus->parent;
-	return acpi_get_pci_rootbridge_handle(pci_domain_nr(pbus),
-					      pbus->number);
-}
-
-static inline acpi_handle acpi_pci_get_bridge_handle(struct pci_bus *pbus)
-{
-	if (!pci_is_root_bus(pbus))
-		return DEVICE_ACPI_HANDLE(&(pbus->self->dev));
-	return acpi_get_pci_rootbridge_handle(pci_domain_nr(pbus),
-					      pbus->number);
-}
-#endif
-
-#ifdef CONFIG_ACPI_APEI
-extern bool aer_acpi_firmware_first(void);
-#else
-static inline bool aer_acpi_firmware_first(void) { return false; }
-#endif
-
-#endif	/* _PCI_ACPI_H_ */
diff --git a/ANDROID_3.4.5/include/linux/pci-aspm.h b/ANDROID_3.4.5/include/linux/pci-aspm.h
deleted file mode 100644
index c8320144..00000000
--- a/ANDROID_3.4.5/include/linux/pci-aspm.h
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
- *	aspm.h
- *
- *	PCI Express ASPM defines and function prototypes
- *
- *	Copyright (C) 2007 Intel Corp.
- *		Zhang Yanmin (yanmin.zhang@intel.com)
- *		Shaohua Li (shaohua.li@intel.com)
- *
- *	For more information, please consult the following manuals (look at
- *	http://www.pcisig.com/ for how to get them):
- *
- *	PCI Express Specification
- */
-
-#ifndef LINUX_ASPM_H
-#define LINUX_ASPM_H
-
-#include <linux/pci.h>
-
-#define PCIE_LINK_STATE_L0S	1
-#define PCIE_LINK_STATE_L1	2
-#define PCIE_LINK_STATE_CLKPM	4
-
-#ifdef CONFIG_PCIEASPM
-extern void pcie_aspm_init_link_state(struct pci_dev *pdev);
-extern void pcie_aspm_exit_link_state(struct pci_dev *pdev);
-extern void pcie_aspm_pm_state_change(struct pci_dev *pdev);
-extern void pcie_aspm_powersave_config_link(struct pci_dev *pdev);
-extern void pci_disable_link_state(struct pci_dev *pdev, int state);
-extern void pci_disable_link_state_locked(struct pci_dev *pdev, int state);
-extern void pcie_clear_aspm(struct pci_bus *bus);
-extern void pcie_no_aspm(void);
-#else
-static inline void pcie_aspm_init_link_state(struct pci_dev *pdev)
-{
-}
-static inline void pcie_aspm_exit_link_state(struct pci_dev *pdev)
-{
-}
-static inline void pcie_aspm_pm_state_change(struct pci_dev *pdev)
-{
-}
-static inline void pcie_aspm_powersave_config_link(struct pci_dev *pdev)
-{
-}
-static inline void pci_disable_link_state(struct pci_dev *pdev, int state)
-{
-}
-static inline void pcie_clear_aspm(struct pci_bus *bus)
-{
-}
-static inline void pcie_no_aspm(void)
-{
-}
-#endif
-
-#ifdef CONFIG_PCIEASPM_DEBUG /* this depends on CONFIG_PCIEASPM */
-extern void pcie_aspm_create_sysfs_dev_files(struct pci_dev *pdev);
-extern void pcie_aspm_remove_sysfs_dev_files(struct pci_dev *pdev);
-#else
-static inline void pcie_aspm_create_sysfs_dev_files(struct pci_dev *pdev)
-{
-}
-static inline void pcie_aspm_remove_sysfs_dev_files(struct pci_dev *pdev)
-{
-}
-#endif
-#endif /* LINUX_ASPM_H */
diff --git a/ANDROID_3.4.5/include/linux/pci-ats.h b/ANDROID_3.4.5/include/linux/pci-ats.h
deleted file mode 100644
index 7ef68724..00000000
--- a/ANDROID_3.4.5/include/linux/pci-ats.h
+++ /dev/null
@@ -1,127 +0,0 @@
-#ifndef LINUX_PCI_ATS_H
-#define LINUX_PCI_ATS_H
-
-#include <linux/pci.h>
-
-/* Address Translation Service */
-struct pci_ats {
-	int pos;        /* capability position */
-	int stu;        /* Smallest Translation Unit */
-	int qdep;       /* Invalidate Queue Depth */
-	int ref_cnt;    /* Physical Function reference count */
-	unsigned int is_enabled:1;      /* Enable bit is set */
-};
-
-#ifdef CONFIG_PCI_ATS
-
-extern int pci_enable_ats(struct pci_dev *dev, int ps);
-extern void pci_disable_ats(struct pci_dev *dev);
-extern int pci_ats_queue_depth(struct pci_dev *dev);
-
-/**
- * pci_ats_enabled - query the ATS status
- * @dev: the PCI device
- *
- * Returns 1 if ATS capability is enabled, or 0 if not.
- */
-static inline int pci_ats_enabled(struct pci_dev *dev)
-{
-	return dev->ats && dev->ats->is_enabled;
-}
-
-#else /* CONFIG_PCI_ATS */
-
-static inline int pci_enable_ats(struct pci_dev *dev, int ps)
-{
-	return -ENODEV;
-}
-
-static inline void pci_disable_ats(struct pci_dev *dev)
-{
-}
-
-static inline int pci_ats_queue_depth(struct pci_dev *dev)
-{
-	return -ENODEV;
-}
-
-static inline int pci_ats_enabled(struct pci_dev *dev)
-{
-	return 0;
-}
-
-#endif /* CONFIG_PCI_ATS */
-
-#ifdef CONFIG_PCI_PRI
-
-extern int  pci_enable_pri(struct pci_dev *pdev, u32 reqs);
-extern void pci_disable_pri(struct pci_dev *pdev);
-extern bool pci_pri_enabled(struct pci_dev *pdev);
-extern int  pci_reset_pri(struct pci_dev *pdev);
-extern bool pci_pri_stopped(struct pci_dev *pdev);
-extern int  pci_pri_status(struct pci_dev *pdev);
-
-#else /* CONFIG_PCI_PRI */
-
-static inline int pci_enable_pri(struct pci_dev *pdev, u32 reqs)
-{
-	return -ENODEV;
-}
-
-static inline void pci_disable_pri(struct pci_dev *pdev)
-{
-}
-
-static inline bool pci_pri_enabled(struct pci_dev *pdev)
-{
-	return false;
-}
-
-static inline int pci_reset_pri(struct pci_dev *pdev)
-{
-	return -ENODEV;
-}
-
-static inline bool pci_pri_stopped(struct pci_dev *pdev)
-{
-	return true;
-}
-
-static inline int pci_pri_status(struct pci_dev *pdev)
-{
-	return -ENODEV;
-}
-#endif /* CONFIG_PCI_PRI */
-
-#ifdef CONFIG_PCI_PASID
-
-extern int pci_enable_pasid(struct pci_dev *pdev, int features);
-extern void pci_disable_pasid(struct pci_dev *pdev);
-extern int pci_pasid_features(struct pci_dev *pdev);
-extern int pci_max_pasids(struct pci_dev *pdev);
-
-#else  /* CONFIG_PCI_PASID */
-
-static inline int pci_enable_pasid(struct pci_dev *pdev, int features)
-{
-	return -EINVAL;
-}
-
-static inline void pci_disable_pasid(struct pci_dev *pdev)
-{
-}
-
-static inline int pci_pasid_features(struct pci_dev *pdev)
-{
-	return -EINVAL;
-}
-
-static inline int pci_max_pasids(struct pci_dev *pdev)
-{
-	return -EINVAL;
-}
-
-#endif /* CONFIG_PCI_PASID */
-
-
-#endif /* LINUX_PCI_ATS_H*/
diff --git a/ANDROID_3.4.5/include/linux/pci-dma.h b/ANDROID_3.4.5/include/linux/pci-dma.h
deleted file mode 100644
index 549a041f..00000000
--- a/ANDROID_3.4.5/include/linux/pci-dma.h
+++ /dev/null
@@ -1,11 +0,0 @@
-#ifndef _LINUX_PCI_DMA_H
-#define _LINUX_PCI_DMA_H
-
-#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME) DEFINE_DMA_UNMAP_ADDR(ADDR_NAME);
-#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)   DEFINE_DMA_UNMAP_LEN(LEN_NAME);
-#define pci_unmap_addr             dma_unmap_addr
-#define pci_unmap_addr_set         dma_unmap_addr_set
-#define pci_unmap_len              dma_unmap_len
-#define pci_unmap_len_set          dma_unmap_len_set
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/pci.h b/ANDROID_3.4.5/include/linux/pci.h
deleted file mode 100644
index e444f5b4..00000000
--- a/ANDROID_3.4.5/include/linux/pci.h
+++ /dev/null
@@ -1,1724 +0,0 @@
-/*
- *	pci.h
- *
- *	PCI defines and function prototypes
- *	Copyright 1994, Drew Eckhardt
- *	Copyright 1997--1999 Martin Mares <mj@ucw.cz>
- *
- *	For more information, please consult the following manuals (look at
- *	http://www.pcisig.com/ for how to get them):
- *
- *	PCI BIOS Specification
- *	PCI Local Bus Specification
- *	PCI to PCI Bridge Specification
- *	PCI System Design Guide
- */
-
-#ifndef LINUX_PCI_H
-#define LINUX_PCI_H
-
-#include <linux/pci_regs.h>	/* The pci register defines */
-
-/*
- * The PCI interface treats multi-function devices as independent
- * devices.  The slot/function address of each device is encoded
- * in a single byte as follows:
- *
- *	7:3 = slot
- *	2:0 = function
- */
-#define PCI_DEVFN(slot, func)	((((slot) & 0x1f) << 3) | ((func) & 0x07))
-#define PCI_SLOT(devfn)		(((devfn) >> 3) & 0x1f)
-#define PCI_FUNC(devfn)		((devfn) & 0x07)
-
-/* Ioctls for /proc/bus/pci/X/Y nodes. */
-#define PCIIOC_BASE		('P' << 24 | 'C' << 16 | 'I' << 8)
-#define PCIIOC_CONTROLLER	(PCIIOC_BASE | 0x00)	/* Get controller for PCI device. */
-#define PCIIOC_MMAP_IS_IO	(PCIIOC_BASE | 0x01)	/* Set mmap state to I/O space. */
-#define PCIIOC_MMAP_IS_MEM	(PCIIOC_BASE | 0x02)	/* Set mmap state to MEM space. */
-#define PCIIOC_WRITE_COMBINE	(PCIIOC_BASE | 0x03)	/* Enable/disable write-combining. */
-
-#ifdef __KERNEL__
-
-#include <linux/mod_devicetable.h>
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/ioport.h>
-#include <linux/list.h>
-#include <linux/compiler.h>
-#include <linux/errno.h>
-#include <linux/kobject.h>
-#include <linux/atomic.h>
-#include <linux/device.h>
-#include <linux/io.h>
-#include <linux/irqreturn.h>
-
-/* Include the ID list */
-#include <linux/pci_ids.h>
-
-/* pci_slot represents a physical slot */
-struct pci_slot {
-	struct pci_bus *bus;		/* The bus this slot is on */
-	struct list_head list;		/* node in list of slots on this bus */
-	struct hotplug_slot *hotplug;	/* Hotplug info (migrate over time) */
-	unsigned char number;		/* PCI_SLOT(pci_dev->devfn) */
-	struct kobject kobj;
-};
-
-static inline const char *pci_slot_name(const struct pci_slot *slot)
-{
-	return kobject_name(&slot->kobj);
-}
-
-/* File state for mmap()s on /proc/bus/pci/X/Y */
-enum pci_mmap_state {
-	pci_mmap_io,
-	pci_mmap_mem
-};
-
-/* This defines the direction arg to the DMA mapping routines. */
-#define PCI_DMA_BIDIRECTIONAL	0
-#define PCI_DMA_TODEVICE	1
-#define PCI_DMA_FROMDEVICE	2
-#define PCI_DMA_NONE		3
-
-/*
- *  For PCI devices, the region numbers are assigned this way:
- */
-enum {
-	/* #0-5: standard PCI resources */
-	PCI_STD_RESOURCES,
-	PCI_STD_RESOURCE_END = 5,
-
-	/* #6: expansion ROM resource */
-	PCI_ROM_RESOURCE,
-
-	/* device specific resources */
-#ifdef CONFIG_PCI_IOV
-	PCI_IOV_RESOURCES,
-	PCI_IOV_RESOURCE_END = PCI_IOV_RESOURCES + PCI_SRIOV_NUM_BARS - 1,
-#endif
-
-	/* resources assigned to buses behind the bridge */
-#define PCI_BRIDGE_RESOURCE_NUM 4
-
-	PCI_BRIDGE_RESOURCES,
-	PCI_BRIDGE_RESOURCE_END = PCI_BRIDGE_RESOURCES +
-				  PCI_BRIDGE_RESOURCE_NUM - 1,
-
-	/* total resources associated with a PCI device */
-	PCI_NUM_RESOURCES,
-
-	/* preserve this for compatibility */
-	DEVICE_COUNT_RESOURCE = PCI_NUM_RESOURCES,
-};
-
-typedef int __bitwise pci_power_t;
-
-#define PCI_D0		((pci_power_t __force) 0)
-#define PCI_D1		((pci_power_t __force) 1)
-#define PCI_D2		((pci_power_t __force) 2)
-#define PCI_D3hot	((pci_power_t __force) 3)
-#define PCI_D3cold	((pci_power_t __force) 4)
-#define PCI_UNKNOWN	((pci_power_t __force) 5)
-#define PCI_POWER_ERROR	((pci_power_t __force) -1)
-
-/* Remember to update this when the list above changes! */
-extern const char *pci_power_names[];
-
-static inline const char *pci_power_name(pci_power_t state)
-{
-	return pci_power_names[1 + (int) state];
-}
-
-#define PCI_PM_D2_DELAY	200
-#define PCI_PM_D3_WAIT	10
-#define PCI_PM_BUS_WAIT	50
-
-/** The pci_channel state describes connectivity between the CPU and
- *  the pci device.  If some PCI bus between here and the pci device
- *  has crashed or locked up, this info is reflected here.
- */
-typedef unsigned int __bitwise pci_channel_state_t;
-
-enum pci_channel_state {
-	/* I/O channel is in normal state */
-	pci_channel_io_normal = (__force pci_channel_state_t) 1,
-
-	/* I/O to channel is blocked */
-	pci_channel_io_frozen = (__force pci_channel_state_t) 2,
-
-	/* PCI card is dead */
-	pci_channel_io_perm_failure = (__force pci_channel_state_t) 3,
-};
-
-typedef unsigned int __bitwise pcie_reset_state_t;
-
-enum pcie_reset_state {
-	/* Reset is NOT asserted (Use to deassert reset) */
-	pcie_deassert_reset = (__force pcie_reset_state_t) 1,
-
-	/* Use #PERST to reset PCI-E device */
-	pcie_warm_reset = (__force pcie_reset_state_t) 2,
-
-	/* Use PCI-E Hot Reset to reset device */
-	pcie_hot_reset = (__force pcie_reset_state_t) 3
-};
-
-typedef unsigned short __bitwise pci_dev_flags_t;
-enum pci_dev_flags {
-	/* INTX_DISABLE in PCI_COMMAND register disables MSI
-	 * generation too.
-	 */
-	PCI_DEV_FLAGS_MSI_INTX_DISABLE_BUG = (__force pci_dev_flags_t) 1,
-	/* Device configuration is irrevocably lost if disabled into D3 */
-	PCI_DEV_FLAGS_NO_D3 = (__force pci_dev_flags_t) 2,
-	/* Provide indication device is assigned by a Virtual Machine Manager */
-	PCI_DEV_FLAGS_ASSIGNED = (__force pci_dev_flags_t) 4,
-};
-
-enum pci_irq_reroute_variant {
-	INTEL_IRQ_REROUTE_VARIANT = 1,
-	MAX_IRQ_REROUTE_VARIANTS = 3
-};
-
-typedef unsigned short __bitwise pci_bus_flags_t;
-enum pci_bus_flags {
-	PCI_BUS_FLAGS_NO_MSI   = (__force pci_bus_flags_t) 1,
-	PCI_BUS_FLAGS_NO_MMRBC = (__force pci_bus_flags_t) 2,
-};
-
-/* Based on the PCI Hotplug Spec, but some values are made up by us */
-enum pci_bus_speed {
-	PCI_SPEED_33MHz			= 0x00,
-	PCI_SPEED_66MHz			= 0x01,
-	PCI_SPEED_66MHz_PCIX		= 0x02,
-	PCI_SPEED_100MHz_PCIX		= 0x03,
-	PCI_SPEED_133MHz_PCIX		= 0x04,
-	PCI_SPEED_66MHz_PCIX_ECC	= 0x05,
-	PCI_SPEED_100MHz_PCIX_ECC	= 0x06,
-	PCI_SPEED_133MHz_PCIX_ECC	= 0x07,
-	PCI_SPEED_66MHz_PCIX_266	= 0x09,
-	PCI_SPEED_100MHz_PCIX_266	= 0x0a,
-	PCI_SPEED_133MHz_PCIX_266	= 0x0b,
-	AGP_UNKNOWN			= 0x0c,
-	AGP_1X				= 0x0d,
-	AGP_2X				= 0x0e,
-	AGP_4X				= 0x0f,
-	AGP_8X				= 0x10,
-	PCI_SPEED_66MHz_PCIX_533	= 0x11,
-	PCI_SPEED_100MHz_PCIX_533	= 0x12,
-	PCI_SPEED_133MHz_PCIX_533	= 0x13,
-	PCIE_SPEED_2_5GT		= 0x14,
-	PCIE_SPEED_5_0GT		= 0x15,
-	PCIE_SPEED_8_0GT		= 0x16,
-	PCI_SPEED_UNKNOWN		= 0xff,
-};
-
-struct pci_cap_saved_data {
-	char cap_nr;
-	unsigned int size;
-	u32 data[0];
-};
-
-struct pci_cap_saved_state {
-	struct hlist_node next;
-	struct pci_cap_saved_data cap;
-};
-
-struct pcie_link_state;
-struct pci_vpd;
-struct pci_sriov;
-struct pci_ats;
-
-/*
- * The pci_dev structure is used to describe PCI devices.
- */
-struct pci_dev {
-	struct list_head bus_list;	/* node in per-bus list */
-	struct pci_bus	*bus;		/* bus this device is on */
-	struct pci_bus	*subordinate;	/* bus this device bridges to */
-
-	void		*sysdata;	/* hook for sys-specific extension */
-	struct proc_dir_entry *procent;	/* device entry in /proc/bus/pci */
-	struct pci_slot	*slot;		/* Physical slot this device is in */
-
-	unsigned int	devfn;		/* encoded device & function index */
-	unsigned short	vendor;
-	unsigned short	device;
-	unsigned short	subsystem_vendor;
-	unsigned short	subsystem_device;
-	unsigned int	class;		/* 3 bytes: (base,sub,prog-if) */
-	u8		revision;	/* PCI revision, low byte of class word */
-	u8		hdr_type;	/* PCI header type (`multi' flag masked out) */
-	u8		pcie_cap;	/* PCI-E capability offset */
-	u8		pcie_type:4;	/* PCI-E device/port type */
-	u8		pcie_mpss:3;	/* PCI-E Max Payload Size Supported */
-	u8		rom_base_reg;	/* which config register controls the ROM */
-	u8		pin;  		/* which interrupt pin this device uses */
-
-	struct pci_driver *driver;	/* which driver has allocated this device */
-	u64		dma_mask;	/* Mask of the bits of bus address this
-					   device implements.  Normally this is
-					   0xffffffff.  You only need to change
-					   this if your device has broken DMA
-					   or supports 64-bit transfers.  */
-
-	struct device_dma_parameters dma_parms;
-
-	pci_power_t     current_state;  /* Current operating state. In ACPI-speak,
-					   this is D0-D3, D0 being fully functional,
-					   and D3 being off. */
-	int		pm_cap;		/* PM capability offset in the
-					   configuration space */
-	unsigned int	pme_support:5;	/* Bitmask of states from which PME#
-					   can be generated */
-	unsigned int	pme_interrupt:1;
-	unsigned int	pme_poll:1;	/* Poll device's PME status bit */
-	unsigned int	d1_support:1;	/* Low power state D1 is supported */
-	unsigned int	d2_support:1;	/* Low power state D2 is supported */
-	unsigned int	no_d1d2:1;	/* Only allow D0 and D3 */
-	unsigned int	mmio_always_on:1;	/* disallow turning off io/mem
-						   decoding during bar sizing */
-	unsigned int	wakeup_prepared:1;
-	unsigned int	d3_delay;	/* D3->D0 transition time in ms */
-
-#ifdef CONFIG_PCIEASPM
-	struct pcie_link_state	*link_state;	/* ASPM link state. */
-#endif
-
-	pci_channel_state_t error_state;	/* current connectivity state */
-	struct	device	dev;		/* Generic device interface */
-
-	int		cfg_size;	/* Size of configuration space */
-
-	/*
-	 * Instead of touching interrupt line and base address registers
-	 * directly, use the values stored here. They might be different!
-	 */
-	unsigned int	irq;
-	struct resource resource[DEVICE_COUNT_RESOURCE]; /* I/O and memory regions + expansion ROMs */
-
-	/* These fields are used by common fixups */
-	unsigned int	transparent:1;	/* Transparent PCI bridge */
-	unsigned int	multifunction:1;/* Part of multi-function device */
-	/* keep track of device state */
-	unsigned int	is_added:1;
-	unsigned int	is_busmaster:1; /* device is busmaster */
-	unsigned int	no_msi:1;	/* device may not use msi */
-	unsigned int	block_cfg_access:1;	/* config space access is blocked */
-	unsigned int	broken_parity_status:1;	/* Device generates false positive parity */
-	unsigned int	irq_reroute_variant:2;	/* device needs IRQ rerouting variant */
-	unsigned int 	msi_enabled:1;
-	unsigned int	msix_enabled:1;
-	unsigned int	ari_enabled:1;	/* ARI forwarding */
-	unsigned int	is_managed:1;
-	unsigned int	is_pcie:1;	/* Obsolete. Will be removed.
-					   Use pci_is_pcie() instead */
-	unsigned int    needs_freset:1; /* Dev requires fundamental reset */
-	unsigned int	state_saved:1;
-	unsigned int	is_physfn:1;
-	unsigned int	is_virtfn:1;
-	unsigned int	reset_fn:1;
-	unsigned int    is_hotplug_bridge:1;
-	unsigned int    __aer_firmware_first_valid:1;
-	unsigned int	__aer_firmware_first:1;
-	pci_dev_flags_t dev_flags;
-	atomic_t	enable_cnt;	/* pci_enable_device has been called */
-
-	u32		saved_config_space[16]; /* config space saved at suspend time */
-	struct hlist_head saved_cap_space;
-	struct bin_attribute *rom_attr; /* attribute descriptor for sysfs ROM entry */
-	int rom_attr_enabled;		/* has display of the rom attribute been enabled? */
-	struct bin_attribute *res_attr[DEVICE_COUNT_RESOURCE]; /* sysfs file for resources */
-	struct bin_attribute *res_attr_wc[DEVICE_COUNT_RESOURCE]; /* sysfs file for WC mapping of resources */
-#ifdef CONFIG_PCI_MSI
-	struct list_head msi_list;
-	struct kset *msi_kset;
-#endif
-	struct pci_vpd *vpd;
-#ifdef CONFIG_PCI_ATS
-	union {
-		struct pci_sriov *sriov;	/* SR-IOV capability related */
-		struct pci_dev *physfn;	/* the PF this VF is associated with */
-	};
-	struct pci_ats	*ats;	/* Address Translation Service */
-#endif
-};
-
-static inline struct pci_dev *pci_physfn(struct pci_dev *dev)
-{
-#ifdef CONFIG_PCI_IOV
-	if (dev->is_virtfn)
-		dev = dev->physfn;
-#endif
-
-	return dev;
-}
-
-extern struct pci_dev *alloc_pci_dev(void);
-
-#define pci_dev_b(n) list_entry(n, struct pci_dev, bus_list)
-#define	to_pci_dev(n) container_of(n, struct pci_dev, dev)
-#define for_each_pci_dev(d) while ((d = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, d)) != NULL)
-
-static inline int pci_channel_offline(struct pci_dev *pdev)
-{
-	return (pdev->error_state != pci_channel_io_normal);
-}
-
-struct pci_host_bridge_window {
-	struct list_head list;
-	struct resource *res;		/* host bridge aperture (CPU address) */
-	resource_size_t offset;		/* bus address + offset = CPU address */
-};
-
-struct pci_host_bridge {
-	struct list_head list;
-	struct pci_bus *bus;		/* root bus */
-	struct list_head windows;	/* pci_host_bridge_windows */
-};
-
-/*
- * The first PCI_BRIDGE_RESOURCE_NUM PCI bus resources (those that correspond
- * to P2P or CardBus bridge windows) go in a table.  Additional ones (for
- * buses below host bridges or subtractive decode bridges) go in the list.
- * Use pci_bus_for_each_resource() to iterate through all the resources.
- */
-
-/*
- * PCI_SUBTRACTIVE_DECODE means the bridge forwards the window implicitly
- * and there's no way to program the bridge with the details of the window.
- * This does not apply to ACPI _CRS windows, even with the _DEC subtractive-
- * decode bit set, because they are explicit and can be programmed with _SRS.
- */
-#define PCI_SUBTRACTIVE_DECODE	0x1
-
-struct pci_bus_resource {
-	struct list_head list;
-	struct resource *res;
-	unsigned int flags;
-};
-
-#define PCI_REGION_FLAG_MASK	0x0fU	/* These bits of resource flags tell us the PCI region flags */
-
-struct pci_bus {
-	struct list_head node;		/* node in list of buses */
-	struct pci_bus	*parent;	/* parent bus this bridge is on */
-	struct list_head children;	/* list of child buses */
-	struct list_head devices;	/* list of devices on this bus */
-	struct pci_dev	*self;		/* bridge device as seen by parent */
-	struct list_head slots;		/* list of slots on this bus */
-	struct resource *resource[PCI_BRIDGE_RESOURCE_NUM];
-	struct list_head resources;	/* address space routed to this bus */
-
-	struct pci_ops	*ops;		/* configuration access functions */
-	void		*sysdata;	/* hook for sys-specific extension */
-	struct proc_dir_entry *procdir;	/* directory entry in /proc/bus/pci */
-
-	unsigned char	number;		/* bus number */
-	unsigned char	primary;	/* number of primary bridge */
-	unsigned char	secondary;	/* number of secondary bridge */
-	unsigned char	subordinate;	/* max number of subordinate buses */
-	unsigned char	max_bus_speed;	/* enum pci_bus_speed */
-	unsigned char	cur_bus_speed;	/* enum pci_bus_speed */
-
-	char		name[48];
-
-	unsigned short  bridge_ctl;	/* manage NO_ISA/FBB/et al behaviors */
-	pci_bus_flags_t bus_flags;	/* Inherited by child busses */
-	struct device		*bridge;
-	struct device		dev;
-	struct bin_attribute	*legacy_io; /* legacy I/O for this bus */
-	struct bin_attribute	*legacy_mem; /* legacy mem */
-	unsigned int		is_added:1;
-};
-
-#define pci_bus_b(n)	list_entry(n, struct pci_bus, node)
-#define to_pci_bus(n)	container_of(n, struct pci_bus, dev)
-
-/*
- * Returns true if the pci bus is root (behind host-pci bridge),
- * false otherwise
- */
-static inline bool pci_is_root_bus(struct pci_bus *pbus)
-{
-	return !(pbus->parent);
-}
-
-#ifdef CONFIG_PCI_MSI
-static inline bool pci_dev_msi_enabled(struct pci_dev *pci_dev)
-{
-	return pci_dev->msi_enabled || pci_dev->msix_enabled;
-}
-#else
-static inline bool pci_dev_msi_enabled(struct pci_dev *pci_dev) { return false; }
-#endif
-
-/*
- * Error values that may be returned by PCI functions.
- */
-#define PCIBIOS_SUCCESSFUL		0x00
-#define PCIBIOS_FUNC_NOT_SUPPORTED	0x81
-#define PCIBIOS_BAD_VENDOR_ID		0x83
-#define PCIBIOS_DEVICE_NOT_FOUND	0x86
-#define PCIBIOS_BAD_REGISTER_NUMBER	0x87
-#define PCIBIOS_SET_FAILED		0x88
-#define PCIBIOS_BUFFER_TOO_SMALL	0x89
-
-/* Low-level architecture-dependent routines */
-
-struct pci_ops {
-	int (*read)(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 *val);
-	int (*write)(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 val);
-};
-
-/*
- * ACPI needs to be able to access PCI config space before we've done a
- * PCI bus scan and created pci_bus structures.
- */
-extern int raw_pci_read(unsigned int domain, unsigned int bus,
-			unsigned int devfn, int reg, int len, u32 *val);
-extern int raw_pci_write(unsigned int domain, unsigned int bus,
-			unsigned int devfn, int reg, int len, u32 val);
-
-struct pci_bus_region {
-	resource_size_t start;
-	resource_size_t end;
-};
-
-struct pci_dynids {
-	spinlock_t lock;            /* protects list, index */
-	struct list_head list;      /* for IDs added at runtime */
-};
-
-/* ---------------------------------------------------------------- */
-/** PCI Error Recovery System (PCI-ERS).  If a PCI device driver provides
- *  a set of callbacks in struct pci_error_handlers, then that device driver
- *  will be notified of PCI bus errors, and will be driven to recovery
- *  when an error occurs.
- */
-
-typedef unsigned int __bitwise pci_ers_result_t;
-
-enum pci_ers_result {
-	/* no result/none/not supported in device driver */
-	PCI_ERS_RESULT_NONE = (__force pci_ers_result_t) 1,
-
-	/* Device driver can recover without slot reset */
-	PCI_ERS_RESULT_CAN_RECOVER = (__force pci_ers_result_t) 2,
-
-	/* Device driver wants slot to be reset. */
-	PCI_ERS_RESULT_NEED_RESET = (__force pci_ers_result_t) 3,
-
-	/* Device has completely failed, is unrecoverable */
-	PCI_ERS_RESULT_DISCONNECT = (__force pci_ers_result_t) 4,
-
-	/* Device driver is fully recovered and operational */
-	PCI_ERS_RESULT_RECOVERED = (__force pci_ers_result_t) 5,
-};
-
-/* PCI bus error event callbacks */
-struct pci_error_handlers {
-	/* PCI bus error detected on this device */
-	pci_ers_result_t (*error_detected)(struct pci_dev *dev,
-					   enum pci_channel_state error);
-
-	/* MMIO has been re-enabled, but not DMA */
-	pci_ers_result_t (*mmio_enabled)(struct pci_dev *dev);
-
-	/* PCI Express link has been reset */
-	pci_ers_result_t (*link_reset)(struct pci_dev *dev);
-
-	/* PCI slot has been reset */
-	pci_ers_result_t (*slot_reset)(struct pci_dev *dev);
-
-	/* Device driver may resume normal operations */
-	void (*resume)(struct pci_dev *dev);
-};
-
-/* ---------------------------------------------------------------- */
-
-struct module;
-struct pci_driver {
-	struct list_head node;
-	const char *name;
-	const struct pci_device_id *id_table;	/* must be non-NULL for probe to be called */
-	int  (*probe)  (struct pci_dev *dev, const struct pci_device_id *id);	/* New device inserted */
-	void (*remove) (struct pci_dev *dev);	/* Device removed (NULL if not a hot-plug capable driver) */
-	int  (*suspend) (struct pci_dev *dev, pm_message_t state);	/* Device suspended */
-	int  (*suspend_late) (struct pci_dev *dev, pm_message_t state);
-	int  (*resume_early) (struct pci_dev *dev);
-	int  (*resume) (struct pci_dev *dev);	                /* Device woken up */
-	void (*shutdown) (struct pci_dev *dev);
-	struct pci_error_handlers *err_handler;
-	struct device_driver	driver;
-	struct pci_dynids dynids;
-};
-
-#define	to_pci_driver(drv) container_of(drv, struct pci_driver, driver)
-
-/**
- * DEFINE_PCI_DEVICE_TABLE - macro used to describe a pci device table
- * @_table: device table name
- *
- * This macro is used to create a struct pci_device_id array (a device table)
- * in a generic manner.
- */
-#define DEFINE_PCI_DEVICE_TABLE(_table) \
-	const struct pci_device_id _table[] __devinitconst
-
-/**
- * PCI_DEVICE - macro used to describe a specific pci device
- * @vend: the 16 bit PCI Vendor ID
- * @dev: the 16 bit PCI Device ID
- *
- * This macro is used to create a struct pci_device_id that matches a
- * specific device.  The subvendor and subdevice fields will be set to
- * PCI_ANY_ID.
- */
-#define PCI_DEVICE(vend,dev) \
-	.vendor = (vend), .device = (dev), \
-	.subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID
-
-/**
- * PCI_DEVICE_CLASS - macro used to describe a specific pci device class
- * @dev_class: the class, subclass, prog-if triple for this device
- * @dev_class_mask: the class mask for this device
- *
- * This macro is used to create a struct pci_device_id that matches a
- * specific PCI class.  The vendor, device, subvendor, and subdevice
- * fields will be set to PCI_ANY_ID.
- */
-#define PCI_DEVICE_CLASS(dev_class,dev_class_mask) \
-	.class = (dev_class), .class_mask = (dev_class_mask), \
-	.vendor = PCI_ANY_ID, .device = PCI_ANY_ID, \
-	.subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID
-
-/**
- * PCI_VDEVICE - macro used to describe a specific pci device in short form
- * @vendor: the vendor name
- * @device: the 16 bit PCI Device ID
- *
- * This macro is used to create a struct pci_device_id that matches a
- * specific PCI device.  The subvendor, and subdevice fields will be set
- * to PCI_ANY_ID. The macro allows the next field to follow as the device
- * private data.
- */
-
-#define PCI_VDEVICE(vendor, device)		\
-	PCI_VENDOR_ID_##vendor, (device),	\
-	PCI_ANY_ID, PCI_ANY_ID, 0, 0
-
-/* these external functions are only available when PCI support is enabled */
-#ifdef CONFIG_PCI
-
-extern void pcie_bus_configure_settings(struct pci_bus *bus, u8 smpss);
-
-enum pcie_bus_config_types {
-	PCIE_BUS_TUNE_OFF,
-	PCIE_BUS_SAFE,
-	PCIE_BUS_PERFORMANCE,
-	PCIE_BUS_PEER2PEER,
-};
-
-extern enum pcie_bus_config_types pcie_bus_config;
-
-extern struct bus_type pci_bus_type;
-
-/* Do NOT directly access these two variables, unless you are arch specific pci
- * code, or pci core code. */
-extern struct list_head pci_root_buses;	/* list of all known PCI buses */
-/* Some device drivers need know if pci is initiated */
-extern int no_pci_devices(void);
-
-void pcibios_fixup_bus(struct pci_bus *);
-int __must_check pcibios_enable_device(struct pci_dev *, int mask);
-char *pcibios_setup(char *str);
-
-/* Used only when drivers/pci/setup.c is used */
-resource_size_t pcibios_align_resource(void *, const struct resource *,
-				resource_size_t,
-				resource_size_t);
-void pcibios_update_irq(struct pci_dev *, int irq);
-
-/* Weak but can be overriden by arch */
-void pci_fixup_cardbus(struct pci_bus *);
-
-/* Generic PCI functions used internally */
-
-void pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region,
-			     struct resource *res);
-void pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res,
-			     struct pci_bus_region *region);
-void pcibios_scan_specific_bus(int busn);
-extern struct pci_bus *pci_find_bus(int domain, int busnr);
-void pci_bus_add_devices(const struct pci_bus *bus);
-struct pci_bus *pci_scan_bus_parented(struct device *parent, int bus,
-				      struct pci_ops *ops, void *sysdata);
-struct pci_bus *pci_scan_bus(int bus, struct pci_ops *ops, void *sysdata);
-struct pci_bus *pci_create_root_bus(struct device *parent, int bus,
-				    struct pci_ops *ops, void *sysdata,
-				    struct list_head *resources);
-struct pci_bus * __devinit pci_scan_root_bus(struct device *parent, int bus,
-					     struct pci_ops *ops, void *sysdata,
-					     struct list_head *resources);
-struct pci_bus *pci_add_new_bus(struct pci_bus *parent, struct pci_dev *dev,
-				int busnr);
-void pcie_update_link_speed(struct pci_bus *bus, u16 link_status);
-struct pci_slot *pci_create_slot(struct pci_bus *parent, int slot_nr,
-				 const char *name,
-				 struct hotplug_slot *hotplug);
-void pci_destroy_slot(struct pci_slot *slot);
-void pci_renumber_slot(struct pci_slot *slot, int slot_nr);
-int pci_scan_slot(struct pci_bus *bus, int devfn);
-struct pci_dev *pci_scan_single_device(struct pci_bus *bus, int devfn);
-void pci_device_add(struct pci_dev *dev, struct pci_bus *bus);
-unsigned int pci_scan_child_bus(struct pci_bus *bus);
-int __must_check pci_bus_add_device(struct pci_dev *dev);
-void pci_read_bridge_bases(struct pci_bus *child);
-struct resource *pci_find_parent_resource(const struct pci_dev *dev,
-					  struct resource *res);
-u8 pci_swizzle_interrupt_pin(struct pci_dev *dev, u8 pin);
-int pci_get_interrupt_pin(struct pci_dev *dev, struct pci_dev **bridge);
-u8 pci_common_swizzle(struct pci_dev *dev, u8 *pinp);
-extern struct pci_dev *pci_dev_get(struct pci_dev *dev);
-extern void pci_dev_put(struct pci_dev *dev);
-extern void pci_remove_bus(struct pci_bus *b);
-extern void __pci_remove_bus_device(struct pci_dev *dev);
-extern void pci_stop_and_remove_bus_device(struct pci_dev *dev);
-extern void pci_stop_bus_device(struct pci_dev *dev);
-void pci_setup_cardbus(struct pci_bus *bus);
-extern void pci_sort_breadthfirst(void);
-#define dev_is_pci(d) ((d)->bus == &pci_bus_type)
-#define dev_is_pf(d) ((dev_is_pci(d) ? to_pci_dev(d)->is_physfn : false))
-#define dev_num_vf(d) ((dev_is_pci(d) ? pci_num_vf(to_pci_dev(d)) : 0))
-
-/* Generic PCI functions exported to card drivers */
-
-enum pci_lost_interrupt_reason {
-	PCI_LOST_IRQ_NO_INFORMATION = 0,
-	PCI_LOST_IRQ_DISABLE_MSI,
-	PCI_LOST_IRQ_DISABLE_MSIX,
-	PCI_LOST_IRQ_DISABLE_ACPI,
-};
-enum pci_lost_interrupt_reason pci_lost_interrupt(struct pci_dev *dev);
-int pci_find_capability(struct pci_dev *dev, int cap);
-int pci_find_next_capability(struct pci_dev *dev, u8 pos, int cap);
-int pci_find_ext_capability(struct pci_dev *dev, int cap);
-int pci_bus_find_ext_capability(struct pci_bus *bus, unsigned int devfn,
-				int cap);
-int pci_find_ht_capability(struct pci_dev *dev, int ht_cap);
-int pci_find_next_ht_capability(struct pci_dev *dev, int pos, int ht_cap);
-struct pci_bus *pci_find_next_bus(const struct pci_bus *from);
-
-struct pci_dev *pci_get_device(unsigned int vendor, unsigned int device,
-				struct pci_dev *from);
-struct pci_dev *pci_get_subsys(unsigned int vendor, unsigned int device,
-				unsigned int ss_vendor, unsigned int ss_device,
-				struct pci_dev *from);
-struct pci_dev *pci_get_slot(struct pci_bus *bus, unsigned int devfn);
-struct pci_dev *pci_get_domain_bus_and_slot(int domain, unsigned int bus,
-					    unsigned int devfn);
-static inline struct pci_dev *pci_get_bus_and_slot(unsigned int bus,
-						   unsigned int devfn)
-{
-	return pci_get_domain_bus_and_slot(0, bus, devfn);
-}
-struct pci_dev *pci_get_class(unsigned int class, struct pci_dev *from);
-int pci_dev_present(const struct pci_device_id *ids);
-
-int pci_bus_read_config_byte(struct pci_bus *bus, unsigned int devfn,
-			     int where, u8 *val);
-int pci_bus_read_config_word(struct pci_bus *bus, unsigned int devfn,
-			     int where, u16 *val);
-int pci_bus_read_config_dword(struct pci_bus *bus, unsigned int devfn,
-			      int where, u32 *val);
-int pci_bus_write_config_byte(struct pci_bus *bus, unsigned int devfn,
-			      int where, u8 val);
-int pci_bus_write_config_word(struct pci_bus *bus, unsigned int devfn,
-			      int where, u16 val);
-int pci_bus_write_config_dword(struct pci_bus *bus, unsigned int devfn,
-			       int where, u32 val);
-struct pci_ops *pci_bus_set_ops(struct pci_bus *bus, struct pci_ops *ops);
-
-static inline int pci_read_config_byte(const struct pci_dev *dev, int where, u8 *val)
-{
-	return pci_bus_read_config_byte(dev->bus, dev->devfn, where, val);
-}
-static inline int pci_read_config_word(const struct pci_dev *dev, int where, u16 *val)
-{
-	return pci_bus_read_config_word(dev->bus, dev->devfn, where, val);
-}
-static inline int pci_read_config_dword(const struct pci_dev *dev, int where,
-					u32 *val)
-{
-	return pci_bus_read_config_dword(dev->bus, dev->devfn, where, val);
-}
-static inline int pci_write_config_byte(const struct pci_dev *dev, int where, u8 val)
-{
-	return pci_bus_write_config_byte(dev->bus, dev->devfn, where, val);
-}
-static inline int pci_write_config_word(const struct pci_dev *dev, int where, u16 val)
-{
-	return pci_bus_write_config_word(dev->bus, dev->devfn, where, val);
-}
-static inline int pci_write_config_dword(const struct pci_dev *dev, int where,
-					 u32 val)
-{
-	return pci_bus_write_config_dword(dev->bus, dev->devfn, where, val);
-}
-
-int __must_check pci_enable_device(struct pci_dev *dev);
-int __must_check pci_enable_device_io(struct pci_dev *dev);
-int __must_check pci_enable_device_mem(struct pci_dev *dev);
-int __must_check pci_reenable_device(struct pci_dev *);
-int __must_check pcim_enable_device(struct pci_dev *pdev);
-void pcim_pin_device(struct pci_dev *pdev);
-
-static inline int pci_is_enabled(struct pci_dev *pdev)
-{
-	return (atomic_read(&pdev->enable_cnt) > 0);
-}
-
-static inline int pci_is_managed(struct pci_dev *pdev)
-{
-	return pdev->is_managed;
-}
-
-void pci_disable_device(struct pci_dev *dev);
-
-extern unsigned int pcibios_max_latency;
-void pci_set_master(struct pci_dev *dev);
-void pci_clear_master(struct pci_dev *dev);
-
-int pci_set_pcie_reset_state(struct pci_dev *dev, enum pcie_reset_state state);
-int pci_set_cacheline_size(struct pci_dev *dev);
-#define HAVE_PCI_SET_MWI
-int __must_check pci_set_mwi(struct pci_dev *dev);
-int pci_try_set_mwi(struct pci_dev *dev);
-void pci_clear_mwi(struct pci_dev *dev);
-void pci_intx(struct pci_dev *dev, int enable);
-bool pci_intx_mask_supported(struct pci_dev *dev);
-bool pci_check_and_mask_intx(struct pci_dev *dev);
-bool pci_check_and_unmask_intx(struct pci_dev *dev);
-void pci_msi_off(struct pci_dev *dev);
-int pci_set_dma_max_seg_size(struct pci_dev *dev, unsigned int size);
-int pci_set_dma_seg_boundary(struct pci_dev *dev, unsigned long mask);
-int pcix_get_max_mmrbc(struct pci_dev *dev);
-int pcix_get_mmrbc(struct pci_dev *dev);
-int pcix_set_mmrbc(struct pci_dev *dev, int mmrbc);
-int pcie_get_readrq(struct pci_dev *dev);
-int pcie_set_readrq(struct pci_dev *dev, int rq);
-int pcie_get_mps(struct pci_dev *dev);
-int pcie_set_mps(struct pci_dev *dev, int mps);
-int __pci_reset_function(struct pci_dev *dev);
-int __pci_reset_function_locked(struct pci_dev *dev);
-int pci_reset_function(struct pci_dev *dev);
-void pci_update_resource(struct pci_dev *dev, int resno);
-int __must_check pci_assign_resource(struct pci_dev *dev, int i);
-int __must_check pci_reassign_resource(struct pci_dev *dev, int i, resource_size_t add_size, resource_size_t align);
-int pci_select_bars(struct pci_dev *dev, unsigned long flags);
-
-/* ROM control related routines */
-int pci_enable_rom(struct pci_dev *pdev);
-void pci_disable_rom(struct pci_dev *pdev);
-void __iomem __must_check *pci_map_rom(struct pci_dev *pdev, size_t *size);
-void pci_unmap_rom(struct pci_dev *pdev, void __iomem *rom);
-size_t pci_get_rom_size(struct pci_dev *pdev, void __iomem *rom, size_t size);
-
-/* Power management related routines */
-int pci_save_state(struct pci_dev *dev);
-void pci_restore_state(struct pci_dev *dev);
-struct pci_saved_state *pci_store_saved_state(struct pci_dev *dev);
-int pci_load_saved_state(struct pci_dev *dev, struct pci_saved_state *state);
-int pci_load_and_free_saved_state(struct pci_dev *dev,
-				  struct pci_saved_state **state);
-int __pci_complete_power_transition(struct pci_dev *dev, pci_power_t state);
-int pci_set_power_state(struct pci_dev *dev, pci_power_t state);
-pci_power_t pci_choose_state(struct pci_dev *dev, pm_message_t state);
-bool pci_pme_capable(struct pci_dev *dev, pci_power_t state);
-void pci_pme_active(struct pci_dev *dev, bool enable);
-int __pci_enable_wake(struct pci_dev *dev, pci_power_t state,
-		      bool runtime, bool enable);
-int pci_wake_from_d3(struct pci_dev *dev, bool enable);
-pci_power_t pci_target_state(struct pci_dev *dev);
-int pci_prepare_to_sleep(struct pci_dev *dev);
-int pci_back_from_sleep(struct pci_dev *dev);
-bool pci_dev_run_wake(struct pci_dev *dev);
-bool pci_check_pme_status(struct pci_dev *dev);
-void pci_pme_wakeup_bus(struct pci_bus *bus);
-
-static inline int pci_enable_wake(struct pci_dev *dev, pci_power_t state,
-				  bool enable)
-{
-	return __pci_enable_wake(dev, state, false, enable);
-}
-
-#define PCI_EXP_IDO_REQUEST	(1<<0)
-#define PCI_EXP_IDO_COMPLETION	(1<<1)
-void pci_enable_ido(struct pci_dev *dev, unsigned long type);
-void pci_disable_ido(struct pci_dev *dev, unsigned long type);
-
-enum pci_obff_signal_type {
-	PCI_EXP_OBFF_SIGNAL_L0 = 0,
-	PCI_EXP_OBFF_SIGNAL_ALWAYS = 1,
-};
-int pci_enable_obff(struct pci_dev *dev, enum pci_obff_signal_type);
-void pci_disable_obff(struct pci_dev *dev);
-
-bool pci_ltr_supported(struct pci_dev *dev);
-int pci_enable_ltr(struct pci_dev *dev);
-void pci_disable_ltr(struct pci_dev *dev);
-int pci_set_ltr(struct pci_dev *dev, int snoop_lat_ns, int nosnoop_lat_ns);
-
-/* For use by arch with custom probe code */
-void set_pcie_port_type(struct pci_dev *pdev);
-void set_pcie_hotplug_bridge(struct pci_dev *pdev);
-
-/* Functions for PCI Hotplug drivers to use */
-int pci_bus_find_capability(struct pci_bus *bus, unsigned int devfn, int cap);
-#ifdef CONFIG_HOTPLUG
-unsigned int pci_rescan_bus_bridge_resize(struct pci_dev *bridge);
-unsigned int pci_rescan_bus(struct pci_bus *bus);
-#endif
-
-/* Vital product data routines */
-ssize_t pci_read_vpd(struct pci_dev *dev, loff_t pos, size_t count, void *buf);
-ssize_t pci_write_vpd(struct pci_dev *dev, loff_t pos, size_t count, const void *buf);
-int pci_vpd_truncate(struct pci_dev *dev, size_t size);
-
-/* Helper functions for low-level code (drivers/pci/setup-[bus,res].c) */
-resource_size_t pcibios_retrieve_fw_addr(struct pci_dev *dev, int idx);
-void pci_bus_assign_resources(const struct pci_bus *bus);
-void pci_bus_size_bridges(struct pci_bus *bus);
-int pci_claim_resource(struct pci_dev *, int);
-void pci_assign_unassigned_resources(void);
-void pci_assign_unassigned_bridge_resources(struct pci_dev *bridge);
-void pdev_enable_device(struct pci_dev *);
-int pci_enable_resources(struct pci_dev *, int mask);
-void pci_fixup_irqs(u8 (*)(struct pci_dev *, u8 *),
-		    int (*)(const struct pci_dev *, u8, u8));
-#define HAVE_PCI_REQ_REGIONS	2
-int __must_check pci_request_regions(struct pci_dev *, const char *);
-int __must_check pci_request_regions_exclusive(struct pci_dev *, const char *);
-void pci_release_regions(struct pci_dev *);
-int __must_check pci_request_region(struct pci_dev *, int, const char *);
-int __must_check pci_request_region_exclusive(struct pci_dev *, int, const char *);
-void pci_release_region(struct pci_dev *, int);
-int pci_request_selected_regions(struct pci_dev *, int, const char *);
-int pci_request_selected_regions_exclusive(struct pci_dev *, int, const char *);
-void pci_release_selected_regions(struct pci_dev *, int);
-
-/* drivers/pci/bus.c */
-void pci_add_resource(struct list_head *resources, struct resource *res);
-void pci_add_resource_offset(struct list_head *resources, struct resource *res,
-			     resource_size_t offset);
-void pci_free_resource_list(struct list_head *resources);
-void pci_bus_add_resource(struct pci_bus *bus, struct resource *res, unsigned int flags);
-struct resource *pci_bus_resource_n(const struct pci_bus *bus, int n);
-void pci_bus_remove_resources(struct pci_bus *bus);
-
-#define pci_bus_for_each_resource(bus, res, i)				\
-	for (i = 0;							\
-	    (res = pci_bus_resource_n(bus, i)) || i < PCI_BRIDGE_RESOURCE_NUM; \
-	     i++)
-
-int __must_check pci_bus_alloc_resource(struct pci_bus *bus,
-			struct resource *res, resource_size_t size,
-			resource_size_t align, resource_size_t min,
-			unsigned int type_mask,
-			resource_size_t (*alignf)(void *,
-						  const struct resource *,
-						  resource_size_t,
-						  resource_size_t),
-			void *alignf_data);
-void pci_enable_bridges(struct pci_bus *bus);
-
-/* Proper probing supporting hot-pluggable devices */
-int __must_check __pci_register_driver(struct pci_driver *, struct module *,
-				       const char *mod_name);
-
-/*
- * pci_register_driver must be a macro so that KBUILD_MODNAME can be expanded
- */
-#define pci_register_driver(driver)		\
-	__pci_register_driver(driver, THIS_MODULE, KBUILD_MODNAME)
-
-void pci_unregister_driver(struct pci_driver *dev);
-
-/**
- * module_pci_driver() - Helper macro for registering a PCI driver
- * @__pci_driver: pci_driver struct
- *
- * Helper macro for PCI drivers which do not do anything special in module
- * init/exit. This eliminates a lot of boilerplate. Each module may only
- * use this macro once, and calling it replaces module_init() and module_exit()
- */
-#define module_pci_driver(__pci_driver) \
-	module_driver(__pci_driver, pci_register_driver, \
-		       pci_unregister_driver)
-
-void pci_stop_and_remove_behind_bridge(struct pci_dev *dev);
-struct pci_driver *pci_dev_driver(const struct pci_dev *dev);
-int pci_add_dynid(struct pci_driver *drv,
-		  unsigned int vendor, unsigned int device,
-		  unsigned int subvendor, unsigned int subdevice,
-		  unsigned int class, unsigned int class_mask,
-		  unsigned long driver_data);
-const struct pci_device_id *pci_match_id(const struct pci_device_id *ids,
-					 struct pci_dev *dev);
-int pci_scan_bridge(struct pci_bus *bus, struct pci_dev *dev, int max,
-		    int pass);
-
-void pci_walk_bus(struct pci_bus *top, int (*cb)(struct pci_dev *, void *),
-		  void *userdata);
-int pci_cfg_space_size_ext(struct pci_dev *dev);
-int pci_cfg_space_size(struct pci_dev *dev);
-unsigned char pci_bus_max_busnr(struct pci_bus *bus);
-void pci_setup_bridge(struct pci_bus *bus);
-
-#define PCI_VGA_STATE_CHANGE_BRIDGE (1 << 0)
-#define PCI_VGA_STATE_CHANGE_DECODES (1 << 1)
-
-int pci_set_vga_state(struct pci_dev *pdev, bool decode,
-		      unsigned int command_bits, u32 flags);
-/* kmem_cache style wrapper around pci_alloc_consistent() */
-
-#include <linux/pci-dma.h>
-#include <linux/dmapool.h>
-
-#define	pci_pool dma_pool
-#define pci_pool_create(name, pdev, size, align, allocation) \
-		dma_pool_create(name, &pdev->dev, size, align, allocation)
-#define	pci_pool_destroy(pool) dma_pool_destroy(pool)
-#define	pci_pool_alloc(pool, flags, handle) dma_pool_alloc(pool, flags, handle)
-#define	pci_pool_free(pool, vaddr, addr) dma_pool_free(pool, vaddr, addr)
-
-enum pci_dma_burst_strategy {
-	PCI_DMA_BURST_INFINITY,	/* make bursts as large as possible,
-				   strategy_parameter is N/A */
-	PCI_DMA_BURST_BOUNDARY, /* disconnect at every strategy_parameter
-				   byte boundaries */
-	PCI_DMA_BURST_MULTIPLE, /* disconnect at some multiple of
-				   strategy_parameter byte boundaries */
-};
-
-struct msix_entry {
-	u32	vector;	/* kernel uses to write allocated vector */
-	u16	entry;	/* driver uses to specify entry, OS writes */
-};
-
-
-#ifndef CONFIG_PCI_MSI
-static inline int pci_enable_msi_block(struct pci_dev *dev, unsigned int nvec)
-{
-	return -1;
-}
-
-static inline void pci_msi_shutdown(struct pci_dev *dev)
-{ }
-static inline void pci_disable_msi(struct pci_dev *dev)
-{ }
-
-static inline int pci_msix_table_size(struct pci_dev *dev)
-{
-	return 0;
-}
-static inline int pci_enable_msix(struct pci_dev *dev,
-				  struct msix_entry *entries, int nvec)
-{
-	return -1;
-}
-
-static inline void pci_msix_shutdown(struct pci_dev *dev)
-{ }
-static inline void pci_disable_msix(struct pci_dev *dev)
-{ }
-
-static inline void msi_remove_pci_irq_vectors(struct pci_dev *dev)
-{ }
-
-static inline void pci_restore_msi_state(struct pci_dev *dev)
-{ }
-static inline int pci_msi_enabled(void)
-{
-	return 0;
-}
-#else
-extern int pci_enable_msi_block(struct pci_dev *dev, unsigned int nvec);
-extern void pci_msi_shutdown(struct pci_dev *dev);
-extern void pci_disable_msi(struct pci_dev *dev);
-extern int pci_msix_table_size(struct pci_dev *dev);
-extern int pci_enable_msix(struct pci_dev *dev,
-	struct msix_entry *entries, int nvec);
-extern void pci_msix_shutdown(struct pci_dev *dev);
-extern void pci_disable_msix(struct pci_dev *dev);
-extern void msi_remove_pci_irq_vectors(struct pci_dev *dev);
-extern void pci_restore_msi_state(struct pci_dev *dev);
-extern int pci_msi_enabled(void);
-#endif
-
-#ifdef CONFIG_PCIEPORTBUS
-extern bool pcie_ports_disabled;
-extern bool pcie_ports_auto;
-#else
-#define pcie_ports_disabled	true
-#define pcie_ports_auto		false
-#endif
-
-#ifndef CONFIG_PCIEASPM
-static inline int pcie_aspm_enabled(void) { return 0; }
-static inline bool pcie_aspm_support_enabled(void) { return false; }
-#else
-extern int pcie_aspm_enabled(void);
-extern bool pcie_aspm_support_enabled(void);
-#endif
-
-#ifdef CONFIG_PCIEAER
-void pci_no_aer(void);
-bool pci_aer_available(void);
-#else
-static inline void pci_no_aer(void) { }
-static inline bool pci_aer_available(void) { return false; }
-#endif
-
-#ifndef CONFIG_PCIE_ECRC
-static inline void pcie_set_ecrc_checking(struct pci_dev *dev)
-{
-	return;
-}
-static inline void pcie_ecrc_get_policy(char *str) {};
-#else
-extern void pcie_set_ecrc_checking(struct pci_dev *dev);
-extern void pcie_ecrc_get_policy(char *str);
-#endif
-
-#define pci_enable_msi(pdev)	pci_enable_msi_block(pdev, 1)
-
-#ifdef CONFIG_HT_IRQ
-/* The functions a driver should call */
-int  ht_create_irq(struct pci_dev *dev, int idx);
-void ht_destroy_irq(unsigned int irq);
-#endif /* CONFIG_HT_IRQ */
-
-extern void pci_cfg_access_lock(struct pci_dev *dev);
-extern bool pci_cfg_access_trylock(struct pci_dev *dev);
-extern void pci_cfg_access_unlock(struct pci_dev *dev);
-
-/*
- * PCI domain support.  Sometimes called PCI segment (eg by ACPI),
- * a PCI domain is defined to be a set of PCI busses which share
- * configuration space.
- */
-#ifdef CONFIG_PCI_DOMAINS
-extern int pci_domains_supported;
-#else
-enum { pci_domains_supported = 0 };
-static inline int pci_domain_nr(struct pci_bus *bus)
-{
-	return 0;
-}
-
-static inline int pci_proc_domain(struct pci_bus *bus)
-{
-	return 0;
-}
-#endif /* CONFIG_PCI_DOMAINS */
-
-/* some architectures require additional setup to direct VGA traffic */
-typedef int (*arch_set_vga_state_t)(struct pci_dev *pdev, bool decode,
-		      unsigned int command_bits, u32 flags);
-extern void pci_register_set_vga_state(arch_set_vga_state_t func);
-
-#else /* CONFIG_PCI is not enabled */
-
-/*
- *  If the system does not have PCI, clearly these return errors.  Define
- *  these as simple inline functions to avoid hair in drivers.
- */
-
-#define _PCI_NOP(o, s, t) \
-	static inline int pci_##o##_config_##s(struct pci_dev *dev, \
-						int where, t val) \
-		{ return PCIBIOS_FUNC_NOT_SUPPORTED; }
-
-#define _PCI_NOP_ALL(o, x)	_PCI_NOP(o, byte, u8 x) \
-				_PCI_NOP(o, word, u16 x) \
-				_PCI_NOP(o, dword, u32 x)
-_PCI_NOP_ALL(read, *)
-_PCI_NOP_ALL(write,)
-
-static inline struct pci_dev *pci_get_device(unsigned int vendor,
-					     unsigned int device,
-					     struct pci_dev *from)
-{
-	return NULL;
-}
-
-static inline struct pci_dev *pci_get_subsys(unsigned int vendor,
-					     unsigned int device,
-					     unsigned int ss_vendor,
-					     unsigned int ss_device,
-					     struct pci_dev *from)
-{
-	return NULL;
-}
-
-static inline struct pci_dev *pci_get_class(unsigned int class,
-					    struct pci_dev *from)
-{
-	return NULL;
-}
-
-#define pci_dev_present(ids)	(0)
-#define no_pci_devices()	(1)
-#define pci_dev_put(dev)	do { } while (0)
-
-static inline void pci_set_master(struct pci_dev *dev)
-{ }
-
-static inline int pci_enable_device(struct pci_dev *dev)
-{
-	return -EIO;
-}
-
-static inline void pci_disable_device(struct pci_dev *dev)
-{ }
-
-static inline int pci_set_dma_mask(struct pci_dev *dev, u64 mask)
-{
-	return -EIO;
-}
-
-static inline int pci_set_consistent_dma_mask(struct pci_dev *dev, u64 mask)
-{
-	return -EIO;
-}
-
-static inline int pci_set_dma_max_seg_size(struct pci_dev *dev,
-					unsigned int size)
-{
-	return -EIO;
-}
-
-static inline int pci_set_dma_seg_boundary(struct pci_dev *dev,
-					unsigned long mask)
-{
-	return -EIO;
-}
-
-static inline int pci_assign_resource(struct pci_dev *dev, int i)
-{
-	return -EBUSY;
-}
-
-static inline int __pci_register_driver(struct pci_driver *drv,
-					struct module *owner)
-{
-	return 0;
-}
-
-static inline int pci_register_driver(struct pci_driver *drv)
-{
-	return 0;
-}
-
-static inline void pci_unregister_driver(struct pci_driver *drv)
-{ }
-
-static inline int pci_find_capability(struct pci_dev *dev, int cap)
-{
-	return 0;
-}
-
-static inline int pci_find_next_capability(struct pci_dev *dev, u8 post,
-					   int cap)
-{
-	return 0;
-}
-
-static inline int pci_find_ext_capability(struct pci_dev *dev, int cap)
-{
-	return 0;
-}
-
-/* Power management related routines */
-static inline int pci_save_state(struct pci_dev *dev)
-{
-	return 0;
-}
-
-static inline void pci_restore_state(struct pci_dev *dev)
-{ }
-
-static inline int pci_set_power_state(struct pci_dev *dev, pci_power_t state)
-{
-	return 0;
-}
-
-static inline int pci_wake_from_d3(struct pci_dev *dev, bool enable)
-{
-	return 0;
-}
-
-static inline pci_power_t pci_choose_state(struct pci_dev *dev,
-					   pm_message_t state)
-{
-	return PCI_D0;
-}
-
-static inline int pci_enable_wake(struct pci_dev *dev, pci_power_t state,
-				  int enable)
-{
-	return 0;
-}
-
-static inline void pci_enable_ido(struct pci_dev *dev, unsigned long type)
-{
-}
-
-static inline void pci_disable_ido(struct pci_dev *dev, unsigned long type)
-{
-}
-
-static inline int pci_enable_obff(struct pci_dev *dev, unsigned long type)
-{
-	return 0;
-}
-
-static inline void pci_disable_obff(struct pci_dev *dev)
-{
-}
-
-static inline int pci_request_regions(struct pci_dev *dev, const char *res_name)
-{
-	return -EIO;
-}
-
-static inline void pci_release_regions(struct pci_dev *dev)
-{ }
-
-#define pci_dma_burst_advice(pdev, strat, strategy_parameter) do { } while (0)
-
-static inline void pci_block_cfg_access(struct pci_dev *dev)
-{ }
-
-static inline int pci_block_cfg_access_in_atomic(struct pci_dev *dev)
-{ return 0; }
-
-static inline void pci_unblock_cfg_access(struct pci_dev *dev)
-{ }
-
-static inline struct pci_bus *pci_find_next_bus(const struct pci_bus *from)
-{ return NULL; }
-
-static inline struct pci_dev *pci_get_slot(struct pci_bus *bus,
-						unsigned int devfn)
-{ return NULL; }
-
-static inline struct pci_dev *pci_get_bus_and_slot(unsigned int bus,
-						unsigned int devfn)
-{ return NULL; }
-
-static inline int pci_domain_nr(struct pci_bus *bus)
-{ return 0; }
-
-#define dev_is_pci(d) (false)
-#define dev_is_pf(d) (false)
-#define dev_num_vf(d) (0)
-#endif /* CONFIG_PCI */
-
-/* Include architecture-dependent settings and functions */
-
-#include <asm/pci.h>
-
-#ifndef PCIBIOS_MAX_MEM_32
-#define PCIBIOS_MAX_MEM_32 (-1)
-#endif
-
-/* these helpers provide future and backwards compatibility
- * for accessing popular PCI BAR info */
-#define pci_resource_start(dev, bar)	((dev)->resource[(bar)].start)
-#define pci_resource_end(dev, bar)	((dev)->resource[(bar)].end)
-#define pci_resource_flags(dev, bar)	((dev)->resource[(bar)].flags)
-#define pci_resource_len(dev,bar) \
-	((pci_resource_start((dev), (bar)) == 0 &&	\
-	  pci_resource_end((dev), (bar)) ==		\
-	  pci_resource_start((dev), (bar))) ? 0 :	\
-							\
-	 (pci_resource_end((dev), (bar)) -		\
-	  pci_resource_start((dev), (bar)) + 1))
-
-/* Similar to the helpers above, these manipulate per-pci_dev
- * driver-specific data.  They are really just a wrapper around
- * the generic device structure functions of these calls.
- */
-static inline void *pci_get_drvdata(struct pci_dev *pdev)
-{
-	return dev_get_drvdata(&pdev->dev);
-}
-
-static inline void pci_set_drvdata(struct pci_dev *pdev, void *data)
-{
-	dev_set_drvdata(&pdev->dev, data);
-}
-
-/* If you want to know what to call your pci_dev, ask this function.
- * Again, it's a wrapper around the generic device.
- */
-static inline const char *pci_name(const struct pci_dev *pdev)
-{
-	return dev_name(&pdev->dev);
-}
-
-
-/* Some archs don't want to expose struct resource to userland as-is
- * in sysfs and /proc
- */
-#ifndef HAVE_ARCH_PCI_RESOURCE_TO_USER
-static inline void pci_resource_to_user(const struct pci_dev *dev, int bar,
-		const struct resource *rsrc, resource_size_t *start,
-		resource_size_t *end)
-{
-	*start = rsrc->start;
-	*end = rsrc->end;
-}
-#endif /* HAVE_ARCH_PCI_RESOURCE_TO_USER */
-
-
-/*
- *  The world is not perfect and supplies us with broken PCI devices.
- *  For at least a part of these bugs we need a work-around, so both
- *  generic (drivers/pci/quirks.c) and per-architecture code can define
- *  fixup hooks to be called for particular buggy devices.
- */
-
-struct pci_fixup {
-	u16 vendor;		/* You can use PCI_ANY_ID here of course */
-	u16 device;		/* You can use PCI_ANY_ID here of course */
-	u32 class;		/* You can use PCI_ANY_ID here too */
-	unsigned int class_shift;	/* should be 0, 8, 16 */
-	void (*hook)(struct pci_dev *dev);
-};
-
-enum pci_fixup_pass {
-	pci_fixup_early,	/* Before probing BARs */
-	pci_fixup_header,	/* After reading configuration header */
-	pci_fixup_final,	/* Final phase of device fixups */
-	pci_fixup_enable,	/* pci_enable_device() time */
-	pci_fixup_resume,	/* pci_device_resume() */
-	pci_fixup_suspend,	/* pci_device_suspend */
-	pci_fixup_resume_early, /* pci_device_resume_early() */
-};
-
-/* Anonymous variables would be nice... */
-#define DECLARE_PCI_FIXUP_SECTION(section, name, vendor, device, class,	\
-				  class_shift, hook)			\
-	static const struct pci_fixup const __pci_fixup_##name __used	\
-	__attribute__((__section__(#section), aligned((sizeof(void *)))))    \
-		= { vendor, device, class, class_shift, hook };
-
-#define DECLARE_PCI_FIXUP_CLASS_EARLY(vendor, device, class,		\
-					 class_shift, hook)		\
-	DECLARE_PCI_FIXUP_SECTION(.pci_fixup_early,			\
-		vendor##device##hook, vendor, device, class, class_shift, hook)
-#define DECLARE_PCI_FIXUP_CLASS_HEADER(vendor, device, class,		\
-					 class_shift, hook)		\
-	DECLARE_PCI_FIXUP_SECTION(.pci_fixup_header,			\
-		vendor##device##hook, vendor, device, class, class_shift, hook)
-#define DECLARE_PCI_FIXUP_CLASS_FINAL(vendor, device, class,		\
-					 class_shift, hook)		\
-	DECLARE_PCI_FIXUP_SECTION(.pci_fixup_final,			\
-		vendor##device##hook, vendor, device, class, class_shift, hook)
-#define DECLARE_PCI_FIXUP_CLASS_ENABLE(vendor, device, class,		\
-					 class_shift, hook)		\
-	DECLARE_PCI_FIXUP_SECTION(.pci_fixup_enable,			\
-		vendor##device##hook, vendor, device, class, class_shift, hook)
-#define DECLARE_PCI_FIXUP_CLASS_RESUME(vendor, device, class,		\
-					 class_shift, hook)		\
-	DECLARE_PCI_FIXUP_SECTION(.pci_fixup_resume,			\
-		resume##vendor##device##hook, vendor, device, class,	\
-		class_shift, hook)
-#define DECLARE_PCI_FIXUP_CLASS_RESUME_EARLY(vendor, device, class,	\
-					 class_shift, hook)		\
-	DECLARE_PCI_FIXUP_SECTION(.pci_fixup_resume_early,		\
-		resume_early##vendor##device##hook, vendor, device,	\
-		class, class_shift, hook)
-#define DECLARE_PCI_FIXUP_CLASS_SUSPEND(vendor, device, class,		\
-					 class_shift, hook)		\
-	DECLARE_PCI_FIXUP_SECTION(.pci_fixup_suspend,			\
-		suspend##vendor##device##hook, vendor, device, class,	\
-		class_shift, hook)
-
-#define DECLARE_PCI_FIXUP_EARLY(vendor, device, hook)			\
-	DECLARE_PCI_FIXUP_SECTION(.pci_fixup_early,			\
-		vendor##device##hook, vendor, device, PCI_ANY_ID, 0, hook)
-#define DECLARE_PCI_FIXUP_HEADER(vendor, device, hook)			\
-	DECLARE_PCI_FIXUP_SECTION(.pci_fixup_header,			\
-		vendor##device##hook, vendor, device, PCI_ANY_ID, 0, hook)
-#define DECLARE_PCI_FIXUP_FINAL(vendor, device, hook)			\
-	DECLARE_PCI_FIXUP_SECTION(.pci_fixup_final,			\
-		vendor##device##hook, vendor, device, PCI_ANY_ID, 0, hook)
-#define DECLARE_PCI_FIXUP_ENABLE(vendor, device, hook)			\
-	DECLARE_PCI_FIXUP_SECTION(.pci_fixup_enable,			\
-		vendor##device##hook, vendor, device, PCI_ANY_ID, 0, hook)
-#define DECLARE_PCI_FIXUP_RESUME(vendor, device, hook)			\
-	DECLARE_PCI_FIXUP_SECTION(.pci_fixup_resume,			\
-		resume##vendor##device##hook, vendor, device,		\
-		PCI_ANY_ID, 0, hook)
-#define DECLARE_PCI_FIXUP_RESUME_EARLY(vendor, device, hook)		\
-	DECLARE_PCI_FIXUP_SECTION(.pci_fixup_resume_early,		\
-		resume_early##vendor##device##hook, vendor, device,	\
-		PCI_ANY_ID, 0, hook)
-#define DECLARE_PCI_FIXUP_SUSPEND(vendor, device, hook)			\
-	DECLARE_PCI_FIXUP_SECTION(.pci_fixup_suspend,			\
-		suspend##vendor##device##hook, vendor, device,		\
-		PCI_ANY_ID, 0, hook)
-
-#ifdef CONFIG_PCI_QUIRKS
-void pci_fixup_device(enum pci_fixup_pass pass, struct pci_dev *dev);
-#else
-static inline void pci_fixup_device(enum pci_fixup_pass pass,
-				    struct pci_dev *dev) {}
-#endif
-
-void __iomem *pcim_iomap(struct pci_dev *pdev, int bar, unsigned long maxlen);
-void pcim_iounmap(struct pci_dev *pdev, void __iomem *addr);
-void __iomem * const *pcim_iomap_table(struct pci_dev *pdev);
-int pcim_iomap_regions(struct pci_dev *pdev, int mask, const char *name);
-int pcim_iomap_regions_request_all(struct pci_dev *pdev, int mask,
-				   const char *name);
-void pcim_iounmap_regions(struct pci_dev *pdev, int mask);
-
-extern int pci_pci_problems;
-#define PCIPCI_FAIL		1	/* No PCI PCI DMA */
-#define PCIPCI_TRITON		2
-#define PCIPCI_NATOMA		4
-#define PCIPCI_VIAETBF		8
-#define PCIPCI_VSFX		16
-#define PCIPCI_ALIMAGIK		32	/* Need low latency setting */
-#define PCIAGP_FAIL		64	/* No PCI to AGP DMA */
-
-extern unsigned long pci_cardbus_io_size;
-extern unsigned long pci_cardbus_mem_size;
-extern u8 __devinitdata pci_dfl_cache_line_size;
-extern u8 pci_cache_line_size;
-
-extern unsigned long pci_hotplug_io_size;
-extern unsigned long pci_hotplug_mem_size;
-
-/* Architecture specific versions may override these (weak) */
-int pcibios_add_platform_entries(struct pci_dev *dev);
-void pcibios_disable_device(struct pci_dev *dev);
-void pcibios_set_master(struct pci_dev *dev);
-int pcibios_set_pcie_reset_state(struct pci_dev *dev,
-				 enum pcie_reset_state state);
-
-#ifdef CONFIG_PCI_MMCONFIG
-extern void __init pci_mmcfg_early_init(void);
-extern void __init pci_mmcfg_late_init(void);
-#else
-static inline void pci_mmcfg_early_init(void) { }
-static inline void pci_mmcfg_late_init(void) { }
-#endif
-
-int pci_ext_cfg_avail(struct pci_dev *dev);
-
-void __iomem *pci_ioremap_bar(struct pci_dev *pdev, int bar);
-
-#ifdef CONFIG_PCI_IOV
-extern int pci_enable_sriov(struct pci_dev *dev, int nr_virtfn);
-extern void pci_disable_sriov(struct pci_dev *dev);
-extern irqreturn_t pci_sriov_migration(struct pci_dev *dev);
-extern int pci_num_vf(struct pci_dev *dev);
-#else
-static inline int pci_enable_sriov(struct pci_dev *dev, int nr_virtfn)
-{
-	return -ENODEV;
-}
-static inline void pci_disable_sriov(struct pci_dev *dev)
-{
-}
-static inline irqreturn_t pci_sriov_migration(struct pci_dev *dev)
-{
-	return IRQ_NONE;
-}
-static inline int pci_num_vf(struct pci_dev *dev)
-{
-	return 0;
-}
-#endif
-
-#if defined(CONFIG_HOTPLUG_PCI) || defined(CONFIG_HOTPLUG_PCI_MODULE)
-extern void pci_hp_create_module_link(struct pci_slot *pci_slot);
-extern void pci_hp_remove_module_link(struct pci_slot *pci_slot);
-#endif
-
-/**
- * pci_pcie_cap - get the saved PCIe capability offset
- * @dev: PCI device
- *
- * PCIe capability offset is calculated at PCI device initialization
- * time and saved in the data structure. This function returns saved
- * PCIe capability offset. Using this instead of pci_find_capability()
- * reduces unnecessary search in the PCI configuration space. If you
- * need to calculate PCIe capability offset from raw device for some
- * reasons, please use pci_find_capability() instead.
- */
-static inline int pci_pcie_cap(struct pci_dev *dev)
-{
-	return dev->pcie_cap;
-}
-
-/**
- * pci_is_pcie - check if the PCI device is PCI Express capable
- * @dev: PCI device
- *
- * Retrun true if the PCI device is PCI Express capable, false otherwise.
- */
-static inline bool pci_is_pcie(struct pci_dev *dev)
-{
-	return !!pci_pcie_cap(dev);
-}
-
-void pci_request_acs(void);
-
-
-#define PCI_VPD_LRDT			0x80	/* Large Resource Data Type */
-#define PCI_VPD_LRDT_ID(x)		(x | PCI_VPD_LRDT)
-
-/* Large Resource Data Type Tag Item Names */
-#define PCI_VPD_LTIN_ID_STRING		0x02	/* Identifier String */
-#define PCI_VPD_LTIN_RO_DATA		0x10	/* Read-Only Data */
-#define PCI_VPD_LTIN_RW_DATA		0x11	/* Read-Write Data */
-
-#define PCI_VPD_LRDT_ID_STRING		PCI_VPD_LRDT_ID(PCI_VPD_LTIN_ID_STRING)
-#define PCI_VPD_LRDT_RO_DATA		PCI_VPD_LRDT_ID(PCI_VPD_LTIN_RO_DATA)
-#define PCI_VPD_LRDT_RW_DATA		PCI_VPD_LRDT_ID(PCI_VPD_LTIN_RW_DATA)
-
-/* Small Resource Data Type Tag Item Names */
-#define PCI_VPD_STIN_END		0x78	/* End */
-
-#define PCI_VPD_SRDT_END		PCI_VPD_STIN_END
-
-#define PCI_VPD_SRDT_TIN_MASK		0x78
-#define PCI_VPD_SRDT_LEN_MASK		0x07
-
-#define PCI_VPD_LRDT_TAG_SIZE		3
-#define PCI_VPD_SRDT_TAG_SIZE		1
-
-#define PCI_VPD_INFO_FLD_HDR_SIZE	3
-
-#define PCI_VPD_RO_KEYWORD_PARTNO	"PN"
-#define PCI_VPD_RO_KEYWORD_MFR_ID	"MN"
-#define PCI_VPD_RO_KEYWORD_VENDOR0	"V0"
-#define PCI_VPD_RO_KEYWORD_CHKSUM	"RV"
-
-/**
- * pci_vpd_lrdt_size - Extracts the Large Resource Data Type length
- * @lrdt: Pointer to the beginning of the Large Resource Data Type tag
- *
- * Returns the extracted Large Resource Data Type length.
- */
-static inline u16 pci_vpd_lrdt_size(const u8 *lrdt)
-{
-	return (u16)lrdt[1] + ((u16)lrdt[2] << 8);
-}
-
-/**
- * pci_vpd_srdt_size - Extracts the Small Resource Data Type length
- * @lrdt: Pointer to the beginning of the Small Resource Data Type tag
- *
- * Returns the extracted Small Resource Data Type length.
- */
-static inline u8 pci_vpd_srdt_size(const u8 *srdt)
-{
-	return (*srdt) & PCI_VPD_SRDT_LEN_MASK;
-}
-
-/**
- * pci_vpd_info_field_size - Extracts the information field length
- * @lrdt: Pointer to the beginning of an information field header
- *
- * Returns the extracted information field length.
- */
-static inline u8 pci_vpd_info_field_size(const u8 *info_field)
-{
-	return info_field[2];
-}
-
-/**
- * pci_vpd_find_tag - Locates the Resource Data Type tag provided
- * @buf: Pointer to buffered vpd data
- * @off: The offset into the buffer at which to begin the search
- * @len: The length of the vpd buffer
- * @rdt: The Resource Data Type to search for
- *
- * Returns the index where the Resource Data Type was found or
- * -ENOENT otherwise.
- */
-int pci_vpd_find_tag(const u8 *buf, unsigned int off, unsigned int len, u8 rdt);
-
-/**
- * pci_vpd_find_info_keyword - Locates an information field keyword in the VPD
- * @buf: Pointer to buffered vpd data
- * @off: The offset into the buffer at which to begin the search
- * @len: The length of the buffer area, relative to off, in which to search
- * @kw: The keyword to search for
- *
- * Returns the index where the information field keyword was found or
- * -ENOENT otherwise.
- */
-int pci_vpd_find_info_keyword(const u8 *buf, unsigned int off,
-			      unsigned int len, const char *kw);
-
-/* PCI <-> OF binding helpers */
-#ifdef CONFIG_OF
-struct device_node;
-extern void pci_set_of_node(struct pci_dev *dev);
-extern void pci_release_of_node(struct pci_dev *dev);
-extern void pci_set_bus_of_node(struct pci_bus *bus);
-extern void pci_release_bus_of_node(struct pci_bus *bus);
-
-/* Arch may override this (weak) */
-extern struct device_node * __weak pcibios_get_phb_of_node(struct pci_bus *bus);
-
-static inline struct device_node *pci_device_to_OF_node(struct pci_dev *pdev)
-{
-	return pdev ? pdev->dev.of_node : NULL;
-}
-
-static inline struct device_node *pci_bus_to_OF_node(struct pci_bus *bus)
-{
-	return bus ? bus->dev.of_node : NULL;
-}
-
-#else /* CONFIG_OF */
-static inline void pci_set_of_node(struct pci_dev *dev) { }
-static inline void pci_release_of_node(struct pci_dev *dev) { }
-static inline void pci_set_bus_of_node(struct pci_bus *bus) { }
-static inline void pci_release_bus_of_node(struct pci_bus *bus) { }
-#endif  /* CONFIG_OF */
-
-#ifdef CONFIG_EEH
-static inline struct eeh_dev *pci_dev_to_eeh_dev(struct pci_dev *pdev)
-{
-	return pdev->dev.archdata.edev;
-}
-#endif
-
-/**
- * pci_find_upstream_pcie_bridge - find upstream PCIe-to-PCI bridge of a device
- * @pdev: the PCI device
- *
- * if the device is PCIE, return NULL
- * if the device isn't connected to a PCIe bridge (that is its parent is a
- * legacy PCI bridge and the bridge is directly connected to bus 0), return its
- * parent
- */
-struct pci_dev *pci_find_upstream_pcie_bridge(struct pci_dev *pdev);
-
-#endif /* __KERNEL__ */
-#endif /* LINUX_PCI_H */
diff --git a/ANDROID_3.4.5/include/linux/pci_hotplug.h b/ANDROID_3.4.5/include/linux/pci_hotplug.h
deleted file mode 100644
index 45fc162c..00000000
--- a/ANDROID_3.4.5/include/linux/pci_hotplug.h
+++ /dev/null
@@ -1,203 +0,0 @@
-/*
- * PCI HotPlug Core Functions
- *
- * Copyright (C) 1995,2001 Compaq Computer Corporation
- * Copyright (C) 2001 Greg Kroah-Hartman (greg@kroah.com)
- * Copyright (C) 2001 IBM Corp.
- *
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or (at
- * your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
- * NON INFRINGEMENT.  See the GNU General Public License for more
- * details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * Send feedback to <kristen.c.accardi@intel.com>
- *
- */
-#ifndef _PCI_HOTPLUG_H
-#define _PCI_HOTPLUG_H
-
-/* These values come from the PCI Express Spec */
-enum pcie_link_width {
-	PCIE_LNK_WIDTH_RESRV	= 0x00,
-	PCIE_LNK_X1		= 0x01,
-	PCIE_LNK_X2		= 0x02,
-	PCIE_LNK_X4		= 0x04,
-	PCIE_LNK_X8		= 0x08,
-	PCIE_LNK_X12		= 0x0C,
-	PCIE_LNK_X16		= 0x10,
-	PCIE_LNK_X32		= 0x20,
-	PCIE_LNK_WIDTH_UNKNOWN  = 0xFF,
-};
-
-/**
- * struct hotplug_slot_ops -the callbacks that the hotplug pci core can use
- * @owner: The module owner of this structure
- * @mod_name: The module name (KBUILD_MODNAME) of this structure
- * @enable_slot: Called when the user wants to enable a specific pci slot
- * @disable_slot: Called when the user wants to disable a specific pci slot
- * @set_attention_status: Called to set the specific slot's attention LED to
- * the specified value
- * @hardware_test: Called to run a specified hardware test on the specified
- * slot.
- * @get_power_status: Called to get the current power status of a slot.
- * 	If this field is NULL, the value passed in the struct hotplug_slot_info
- * 	will be used when this value is requested by a user.
- * @get_attention_status: Called to get the current attention status of a slot.
- *	If this field is NULL, the value passed in the struct hotplug_slot_info
- *	will be used when this value is requested by a user.
- * @get_latch_status: Called to get the current latch status of a slot.
- *	If this field is NULL, the value passed in the struct hotplug_slot_info
- *	will be used when this value is requested by a user.
- * @get_adapter_status: Called to get see if an adapter is present in the slot or not.
- *	If this field is NULL, the value passed in the struct hotplug_slot_info
- *	will be used when this value is requested by a user.
- *
- * The table of function pointers that is passed to the hotplug pci core by a
- * hotplug pci driver.  These functions are called by the hotplug pci core when
- * the user wants to do something to a specific slot (query it for information,
- * set an LED, enable / disable power, etc.)
- */
-struct hotplug_slot_ops {
-	struct module *owner;
-	const char *mod_name;
-	int (*enable_slot)		(struct hotplug_slot *slot);
-	int (*disable_slot)		(struct hotplug_slot *slot);
-	int (*set_attention_status)	(struct hotplug_slot *slot, u8 value);
-	int (*hardware_test)		(struct hotplug_slot *slot, u32 value);
-	int (*get_power_status)		(struct hotplug_slot *slot, u8 *value);
-	int (*get_attention_status)	(struct hotplug_slot *slot, u8 *value);
-	int (*get_latch_status)		(struct hotplug_slot *slot, u8 *value);
-	int (*get_adapter_status)	(struct hotplug_slot *slot, u8 *value);
-};
-
-/**
- * struct hotplug_slot_info - used to notify the hotplug pci core of the state of the slot
- * @power_status: if power is enabled or not (1/0)
- * @attention_status: if the attention light is enabled or not (1/0)
- * @latch_status: if the latch (if any) is open or closed (1/0)
- * @adapter_status: if there is a pci board present in the slot or not (1/0)
- *
- * Used to notify the hotplug pci core of the status of a specific slot.
- */
-struct hotplug_slot_info {
-	u8	power_status;
-	u8	attention_status;
-	u8	latch_status;
-	u8	adapter_status;
-};
-
-/**
- * struct hotplug_slot - used to register a physical slot with the hotplug pci core
- * @ops: pointer to the &struct hotplug_slot_ops to be used for this slot
- * @info: pointer to the &struct hotplug_slot_info for the initial values for
- * this slot.
- * @release: called during pci_hp_deregister to free memory allocated in a
- * hotplug_slot structure.
- * @private: used by the hotplug pci controller driver to store whatever it
- * needs.
- */
-struct hotplug_slot {
-	struct hotplug_slot_ops		*ops;
-	struct hotplug_slot_info	*info;
-	void (*release) (struct hotplug_slot *slot);
-	void				*private;
-
-	/* Variables below this are for use only by the hotplug pci core. */
-	struct list_head		slot_list;
-	struct pci_slot			*pci_slot;
-};
-#define to_hotplug_slot(n) container_of(n, struct hotplug_slot, kobj)
-
-static inline const char *hotplug_slot_name(const struct hotplug_slot *slot)
-{
-	return pci_slot_name(slot->pci_slot);
-}
-
-extern int __pci_hp_register(struct hotplug_slot *slot, struct pci_bus *pbus,
-			     int nr, const char *name,
-			     struct module *owner, const char *mod_name);
-extern int pci_hp_deregister(struct hotplug_slot *slot);
-extern int __must_check pci_hp_change_slot_info	(struct hotplug_slot *slot,
-						 struct hotplug_slot_info *info);
-
-/* use a define to avoid include chaining to get THIS_MODULE & friends */
-#define pci_hp_register(slot, pbus, devnr, name) \
-	__pci_hp_register(slot, pbus, devnr, name, THIS_MODULE, KBUILD_MODNAME)
-
-/* PCI Setting Record (Type 0) */
-struct hpp_type0 {
-	u32 revision;
-	u8  cache_line_size;
-	u8  latency_timer;
-	u8  enable_serr;
-	u8  enable_perr;
-};
-
-/* PCI-X Setting Record (Type 1) */
-struct hpp_type1 {
-	u32 revision;
-	u8  max_mem_read;
-	u8  avg_max_split;
-	u16 tot_max_split;
-};
-
-/* PCI Express Setting Record (Type 2) */
-struct hpp_type2 {
-	u32 revision;
-	u32 unc_err_mask_and;
-	u32 unc_err_mask_or;
-	u32 unc_err_sever_and;
-	u32 unc_err_sever_or;
-	u32 cor_err_mask_and;
-	u32 cor_err_mask_or;
-	u32 adv_err_cap_and;
-	u32 adv_err_cap_or;
-	u16 pci_exp_devctl_and;
-	u16 pci_exp_devctl_or;
-	u16 pci_exp_lnkctl_and;
-	u16 pci_exp_lnkctl_or;
-	u32 sec_unc_err_sever_and;
-	u32 sec_unc_err_sever_or;
-	u32 sec_unc_err_mask_and;
-	u32 sec_unc_err_mask_or;
-};
-
-struct hotplug_params {
-	struct hpp_type0 *t0;		/* Type0: NULL if not available */
-	struct hpp_type1 *t1;		/* Type1: NULL if not available */
-	struct hpp_type2 *t2;		/* Type2: NULL if not available */
-	struct hpp_type0 type0_data;
-	struct hpp_type1 type1_data;
-	struct hpp_type2 type2_data;
-};
-
-#ifdef CONFIG_ACPI
-#include <acpi/acpi.h>
-#include <acpi/acpi_bus.h>
-int pci_get_hp_params(struct pci_dev *dev, struct hotplug_params *hpp);
-int acpi_get_hp_hw_control_from_firmware(struct pci_dev *dev, u32 flags);
-int acpi_pci_check_ejectable(struct pci_bus *pbus, acpi_handle handle);
-int acpi_pci_detect_ejectable(acpi_handle handle);
-#else
-static inline int pci_get_hp_params(struct pci_dev *dev,
-				    struct hotplug_params *hpp)
-{
-	return -ENODEV;
-}
-#endif
-
-void pci_configure_slot(struct pci_dev *dev);
-#endif
-
diff --git a/ANDROID_3.4.5/include/linux/pci_ids.h b/ANDROID_3.4.5/include/linux/pci_ids.h
deleted file mode 100644
index 3329965e..00000000
--- a/ANDROID_3.4.5/include/linux/pci_ids.h
+++ /dev/null
@@ -1,2907 +0,0 @@
-/*
- *	PCI Class, Vendor and Device IDs
- *
- *	Please keep sorted.
- *
- *	Do not add new entries to this file unless the definitions
- *	are shared between multiple drivers.
- */
-
-/* Device classes and subclasses */
-
-#define PCI_CLASS_NOT_DEFINED		0x0000
-#define PCI_CLASS_NOT_DEFINED_VGA	0x0001
-
-#define PCI_BASE_CLASS_STORAGE		0x01
-#define PCI_CLASS_STORAGE_SCSI		0x0100
-#define PCI_CLASS_STORAGE_IDE		0x0101
-#define PCI_CLASS_STORAGE_FLOPPY	0x0102
-#define PCI_CLASS_STORAGE_IPI		0x0103
-#define PCI_CLASS_STORAGE_RAID		0x0104
-#define PCI_CLASS_STORAGE_SATA		0x0106
-#define PCI_CLASS_STORAGE_SATA_AHCI	0x010601
-#define PCI_CLASS_STORAGE_SAS		0x0107
-#define PCI_CLASS_STORAGE_OTHER		0x0180
-
-#define PCI_BASE_CLASS_NETWORK		0x02
-#define PCI_CLASS_NETWORK_ETHERNET	0x0200
-#define PCI_CLASS_NETWORK_TOKEN_RING	0x0201
-#define PCI_CLASS_NETWORK_FDDI		0x0202
-#define PCI_CLASS_NETWORK_ATM		0x0203
-#define PCI_CLASS_NETWORK_OTHER		0x0280
-
-#define PCI_BASE_CLASS_DISPLAY		0x03
-#define PCI_CLASS_DISPLAY_VGA		0x0300
-#define PCI_CLASS_DISPLAY_XGA		0x0301
-#define PCI_CLASS_DISPLAY_3D		0x0302
-#define PCI_CLASS_DISPLAY_OTHER		0x0380
-
-#define PCI_BASE_CLASS_MULTIMEDIA	0x04
-#define PCI_CLASS_MULTIMEDIA_VIDEO	0x0400
-#define PCI_CLASS_MULTIMEDIA_AUDIO	0x0401
-#define PCI_CLASS_MULTIMEDIA_PHONE	0x0402
-#define PCI_CLASS_MULTIMEDIA_OTHER	0x0480
-
-#define PCI_BASE_CLASS_MEMORY		0x05
-#define PCI_CLASS_MEMORY_RAM		0x0500
-#define PCI_CLASS_MEMORY_FLASH		0x0501
-#define PCI_CLASS_MEMORY_OTHER		0x0580
-
-#define PCI_BASE_CLASS_BRIDGE		0x06
-#define PCI_CLASS_BRIDGE_HOST		0x0600
-#define PCI_CLASS_BRIDGE_ISA		0x0601
-#define PCI_CLASS_BRIDGE_EISA		0x0602
-#define PCI_CLASS_BRIDGE_MC		0x0603
-#define PCI_CLASS_BRIDGE_PCI		0x0604
-#define PCI_CLASS_BRIDGE_PCMCIA		0x0605
-#define PCI_CLASS_BRIDGE_NUBUS		0x0606
-#define PCI_CLASS_BRIDGE_CARDBUS	0x0607
-#define PCI_CLASS_BRIDGE_RACEWAY	0x0608
-#define PCI_CLASS_BRIDGE_OTHER		0x0680
-
-#define PCI_BASE_CLASS_COMMUNICATION	0x07
-#define PCI_CLASS_COMMUNICATION_SERIAL	0x0700
-#define PCI_CLASS_COMMUNICATION_PARALLEL 0x0701
-#define PCI_CLASS_COMMUNICATION_MULTISERIAL 0x0702
-#define PCI_CLASS_COMMUNICATION_MODEM	0x0703
-#define PCI_CLASS_COMMUNICATION_OTHER	0x0780
-
-#define PCI_BASE_CLASS_SYSTEM		0x08
-#define PCI_CLASS_SYSTEM_PIC		0x0800
-#define PCI_CLASS_SYSTEM_PIC_IOAPIC	0x080010
-#define PCI_CLASS_SYSTEM_PIC_IOXAPIC	0x080020
-#define PCI_CLASS_SYSTEM_DMA		0x0801
-#define PCI_CLASS_SYSTEM_TIMER		0x0802
-#define PCI_CLASS_SYSTEM_RTC		0x0803
-#define PCI_CLASS_SYSTEM_PCI_HOTPLUG	0x0804
-#define PCI_CLASS_SYSTEM_SDHCI		0x0805
-#define PCI_CLASS_SYSTEM_OTHER		0x0880
-
-#define PCI_BASE_CLASS_INPUT		0x09
-#define PCI_CLASS_INPUT_KEYBOARD	0x0900
-#define PCI_CLASS_INPUT_PEN		0x0901
-#define PCI_CLASS_INPUT_MOUSE		0x0902
-#define PCI_CLASS_INPUT_SCANNER		0x0903
-#define PCI_CLASS_INPUT_GAMEPORT	0x0904
-#define PCI_CLASS_INPUT_OTHER		0x0980
-
-#define PCI_BASE_CLASS_DOCKING		0x0a
-#define PCI_CLASS_DOCKING_GENERIC	0x0a00
-#define PCI_CLASS_DOCKING_OTHER		0x0a80
-
-#define PCI_BASE_CLASS_PROCESSOR	0x0b
-#define PCI_CLASS_PROCESSOR_386		0x0b00
-#define PCI_CLASS_PROCESSOR_486		0x0b01
-#define PCI_CLASS_PROCESSOR_PENTIUM	0x0b02
-#define PCI_CLASS_PROCESSOR_ALPHA	0x0b10
-#define PCI_CLASS_PROCESSOR_POWERPC	0x0b20
-#define PCI_CLASS_PROCESSOR_MIPS	0x0b30
-#define PCI_CLASS_PROCESSOR_CO		0x0b40
-
-#define PCI_BASE_CLASS_SERIAL		0x0c
-#define PCI_CLASS_SERIAL_FIREWIRE	0x0c00
-#define PCI_CLASS_SERIAL_FIREWIRE_OHCI	0x0c0010
-#define PCI_CLASS_SERIAL_ACCESS		0x0c01
-#define PCI_CLASS_SERIAL_SSA		0x0c02
-#define PCI_CLASS_SERIAL_USB		0x0c03
-#define PCI_CLASS_SERIAL_USB_UHCI	0x0c0300
-#define PCI_CLASS_SERIAL_USB_OHCI	0x0c0310
-#define PCI_CLASS_SERIAL_USB_EHCI	0x0c0320
-#define PCI_CLASS_SERIAL_USB_XHCI	0x0c0330
-#define PCI_CLASS_SERIAL_FIBER		0x0c04
-#define PCI_CLASS_SERIAL_SMBUS		0x0c05
-
-#define PCI_BASE_CLASS_WIRELESS			0x0d
-#define PCI_CLASS_WIRELESS_RF_CONTROLLER	0x0d10
-#define PCI_CLASS_WIRELESS_WHCI			0x0d1010
-
-#define PCI_BASE_CLASS_INTELLIGENT	0x0e
-#define PCI_CLASS_INTELLIGENT_I2O	0x0e00
-
-#define PCI_BASE_CLASS_SATELLITE	0x0f
-#define PCI_CLASS_SATELLITE_TV		0x0f00
-#define PCI_CLASS_SATELLITE_AUDIO	0x0f01
-#define PCI_CLASS_SATELLITE_VOICE	0x0f03
-#define PCI_CLASS_SATELLITE_DATA	0x0f04
-
-#define PCI_BASE_CLASS_CRYPT		0x10
-#define PCI_CLASS_CRYPT_NETWORK		0x1000
-#define PCI_CLASS_CRYPT_ENTERTAINMENT	0x1001
-#define PCI_CLASS_CRYPT_OTHER		0x1080
-
-#define PCI_BASE_CLASS_SIGNAL_PROCESSING 0x11
-#define PCI_CLASS_SP_DPIO		0x1100
-#define PCI_CLASS_SP_OTHER		0x1180
-
-#define PCI_CLASS_OTHERS		0xff
-
-/* Vendors and devices.  Sort key: vendor first, device next. */
-
-#define PCI_VENDOR_ID_TTTECH		0x0357
-#define PCI_DEVICE_ID_TTTECH_MC322	0x000a
-
-#define PCI_VENDOR_ID_DYNALINK		0x0675
-#define PCI_DEVICE_ID_DYNALINK_IS64PH	0x1702
-
-#define PCI_VENDOR_ID_BERKOM			0x0871
-#define PCI_DEVICE_ID_BERKOM_A1T		0xffa1
-#define PCI_DEVICE_ID_BERKOM_T_CONCEPT		0xffa2
-#define PCI_DEVICE_ID_BERKOM_A4T		0xffa4
-#define PCI_DEVICE_ID_BERKOM_SCITEL_QUADRO	0xffa8
-
-#define PCI_VENDOR_ID_COMPAQ		0x0e11
-#define PCI_DEVICE_ID_COMPAQ_TOKENRING	0x0508
-#define PCI_DEVICE_ID_COMPAQ_TACHYON	0xa0fc
-#define PCI_DEVICE_ID_COMPAQ_SMART2P	0xae10
-#define PCI_DEVICE_ID_COMPAQ_NETEL100	0xae32
-#define PCI_DEVICE_ID_COMPAQ_NETEL10	0xae34
-#define PCI_DEVICE_ID_COMPAQ_TRIFLEX_IDE 0xae33
-#define PCI_DEVICE_ID_COMPAQ_NETFLEX3I	0xae35
-#define PCI_DEVICE_ID_COMPAQ_NETEL100D	0xae40
-#define PCI_DEVICE_ID_COMPAQ_NETEL100PI	0xae43
-#define PCI_DEVICE_ID_COMPAQ_NETEL100I	0xb011
-#define PCI_DEVICE_ID_COMPAQ_CISS	0xb060
-#define PCI_DEVICE_ID_COMPAQ_CISSB	0xb178
-#define PCI_DEVICE_ID_COMPAQ_CISSC	0x46
-#define PCI_DEVICE_ID_COMPAQ_THUNDER	0xf130
-#define PCI_DEVICE_ID_COMPAQ_NETFLEX3B	0xf150
-
-#define PCI_VENDOR_ID_NCR		0x1000
-#define PCI_VENDOR_ID_LSI_LOGIC		0x1000
-#define PCI_DEVICE_ID_NCR_53C810	0x0001
-#define PCI_DEVICE_ID_NCR_53C820	0x0002
-#define PCI_DEVICE_ID_NCR_53C825	0x0003
-#define PCI_DEVICE_ID_NCR_53C815	0x0004
-#define PCI_DEVICE_ID_LSI_53C810AP	0x0005
-#define PCI_DEVICE_ID_NCR_53C860	0x0006
-#define PCI_DEVICE_ID_LSI_53C1510	0x000a
-#define PCI_DEVICE_ID_NCR_53C896	0x000b
-#define PCI_DEVICE_ID_NCR_53C895	0x000c
-#define PCI_DEVICE_ID_NCR_53C885	0x000d
-#define PCI_DEVICE_ID_NCR_53C875	0x000f
-#define PCI_DEVICE_ID_NCR_53C1510	0x0010
-#define PCI_DEVICE_ID_LSI_53C895A	0x0012
-#define PCI_DEVICE_ID_LSI_53C875A	0x0013
-#define PCI_DEVICE_ID_LSI_53C1010_33	0x0020
-#define PCI_DEVICE_ID_LSI_53C1010_66	0x0021
-#define PCI_DEVICE_ID_LSI_53C1030	0x0030
-#define PCI_DEVICE_ID_LSI_1030_53C1035	0x0032
-#define PCI_DEVICE_ID_LSI_53C1035	0x0040
-#define PCI_DEVICE_ID_NCR_53C875J	0x008f
-#define PCI_DEVICE_ID_LSI_FC909		0x0621
-#define PCI_DEVICE_ID_LSI_FC929		0x0622
-#define PCI_DEVICE_ID_LSI_FC929_LAN	0x0623
-#define PCI_DEVICE_ID_LSI_FC919		0x0624
-#define PCI_DEVICE_ID_LSI_FC919_LAN	0x0625
-#define PCI_DEVICE_ID_LSI_FC929X	0x0626
-#define PCI_DEVICE_ID_LSI_FC939X	0x0642
-#define PCI_DEVICE_ID_LSI_FC949X	0x0640
-#define PCI_DEVICE_ID_LSI_FC949ES	0x0646
-#define PCI_DEVICE_ID_LSI_FC919X	0x0628
-#define PCI_DEVICE_ID_NCR_YELLOWFIN	0x0701
-#define PCI_DEVICE_ID_LSI_61C102	0x0901
-#define PCI_DEVICE_ID_LSI_63C815	0x1000
-#define PCI_DEVICE_ID_LSI_SAS1064	0x0050
-#define PCI_DEVICE_ID_LSI_SAS1064R	0x0411
-#define PCI_DEVICE_ID_LSI_SAS1066	0x005E
-#define PCI_DEVICE_ID_LSI_SAS1068	0x0054
-#define PCI_DEVICE_ID_LSI_SAS1064A	0x005C
-#define PCI_DEVICE_ID_LSI_SAS1064E	0x0056
-#define PCI_DEVICE_ID_LSI_SAS1066E	0x005A
-#define PCI_DEVICE_ID_LSI_SAS1068E	0x0058
-#define PCI_DEVICE_ID_LSI_SAS1078	0x0060
-
-#define PCI_VENDOR_ID_ATI		0x1002
-/* Mach64 */
-#define PCI_DEVICE_ID_ATI_68800		0x4158
-#define PCI_DEVICE_ID_ATI_215CT222	0x4354
-#define PCI_DEVICE_ID_ATI_210888CX	0x4358
-#define PCI_DEVICE_ID_ATI_215ET222	0x4554
-/* Mach64 / Rage */
-#define PCI_DEVICE_ID_ATI_215GB		0x4742
-#define PCI_DEVICE_ID_ATI_215GD		0x4744
-#define PCI_DEVICE_ID_ATI_215GI		0x4749
-#define PCI_DEVICE_ID_ATI_215GP		0x4750
-#define PCI_DEVICE_ID_ATI_215GQ		0x4751
-#define PCI_DEVICE_ID_ATI_215XL		0x4752
-#define PCI_DEVICE_ID_ATI_215GT		0x4754
-#define PCI_DEVICE_ID_ATI_215GTB	0x4755
-#define PCI_DEVICE_ID_ATI_215_IV	0x4756
-#define PCI_DEVICE_ID_ATI_215_IW	0x4757
-#define PCI_DEVICE_ID_ATI_215_IZ	0x475A
-#define PCI_DEVICE_ID_ATI_210888GX	0x4758
-#define PCI_DEVICE_ID_ATI_215_LB	0x4c42
-#define PCI_DEVICE_ID_ATI_215_LD	0x4c44
-#define PCI_DEVICE_ID_ATI_215_LG	0x4c47
-#define PCI_DEVICE_ID_ATI_215_LI	0x4c49
-#define PCI_DEVICE_ID_ATI_215_LM	0x4c4D
-#define PCI_DEVICE_ID_ATI_215_LN	0x4c4E
-#define PCI_DEVICE_ID_ATI_215_LR	0x4c52
-#define PCI_DEVICE_ID_ATI_215_LS	0x4c53
-#define PCI_DEVICE_ID_ATI_264_LT	0x4c54
-/* Mach64 VT */
-#define PCI_DEVICE_ID_ATI_264VT		0x5654
-#define PCI_DEVICE_ID_ATI_264VU		0x5655
-#define PCI_DEVICE_ID_ATI_264VV		0x5656
-/* Rage128 GL */
-#define PCI_DEVICE_ID_ATI_RAGE128_RE	0x5245
-#define PCI_DEVICE_ID_ATI_RAGE128_RF	0x5246
-#define PCI_DEVICE_ID_ATI_RAGE128_RG	0x5247
-/* Rage128 VR */
-#define PCI_DEVICE_ID_ATI_RAGE128_RK	0x524b
-#define PCI_DEVICE_ID_ATI_RAGE128_RL	0x524c
-#define PCI_DEVICE_ID_ATI_RAGE128_SE	0x5345
-#define PCI_DEVICE_ID_ATI_RAGE128_SF	0x5346
-#define PCI_DEVICE_ID_ATI_RAGE128_SG	0x5347
-#define PCI_DEVICE_ID_ATI_RAGE128_SH	0x5348
-#define PCI_DEVICE_ID_ATI_RAGE128_SK	0x534b
-#define PCI_DEVICE_ID_ATI_RAGE128_SL	0x534c
-#define PCI_DEVICE_ID_ATI_RAGE128_SM	0x534d
-#define PCI_DEVICE_ID_ATI_RAGE128_SN	0x534e
-/* Rage128 Ultra */
-#define PCI_DEVICE_ID_ATI_RAGE128_TF	0x5446
-#define PCI_DEVICE_ID_ATI_RAGE128_TL	0x544c
-#define PCI_DEVICE_ID_ATI_RAGE128_TR	0x5452
-#define PCI_DEVICE_ID_ATI_RAGE128_TS	0x5453
-#define PCI_DEVICE_ID_ATI_RAGE128_TT	0x5454
-#define PCI_DEVICE_ID_ATI_RAGE128_TU	0x5455
-/* Rage128 M3 */
-#define PCI_DEVICE_ID_ATI_RAGE128_LE	0x4c45
-#define PCI_DEVICE_ID_ATI_RAGE128_LF	0x4c46
-/* Rage128 M4 */
-#define PCI_DEVICE_ID_ATI_RAGE128_MF    0x4d46
-#define PCI_DEVICE_ID_ATI_RAGE128_ML    0x4d4c
-/* Rage128 Pro GL */
-#define PCI_DEVICE_ID_ATI_RAGE128_PA	0x5041
-#define PCI_DEVICE_ID_ATI_RAGE128_PB	0x5042
-#define PCI_DEVICE_ID_ATI_RAGE128_PC	0x5043
-#define PCI_DEVICE_ID_ATI_RAGE128_PD	0x5044
-#define PCI_DEVICE_ID_ATI_RAGE128_PE	0x5045
-#define PCI_DEVICE_ID_ATI_RAGE128_PF	0x5046
-/* Rage128 Pro VR */
-#define PCI_DEVICE_ID_ATI_RAGE128_PG	0x5047
-#define PCI_DEVICE_ID_ATI_RAGE128_PH	0x5048
-#define PCI_DEVICE_ID_ATI_RAGE128_PI	0x5049
-#define PCI_DEVICE_ID_ATI_RAGE128_PJ	0x504A
-#define PCI_DEVICE_ID_ATI_RAGE128_PK	0x504B
-#define PCI_DEVICE_ID_ATI_RAGE128_PL	0x504C
-#define PCI_DEVICE_ID_ATI_RAGE128_PM	0x504D
-#define PCI_DEVICE_ID_ATI_RAGE128_PN	0x504E
-#define PCI_DEVICE_ID_ATI_RAGE128_PO	0x504F
-#define PCI_DEVICE_ID_ATI_RAGE128_PP	0x5050
-#define PCI_DEVICE_ID_ATI_RAGE128_PQ	0x5051
-#define PCI_DEVICE_ID_ATI_RAGE128_PR	0x5052
-#define PCI_DEVICE_ID_ATI_RAGE128_PS	0x5053
-#define PCI_DEVICE_ID_ATI_RAGE128_PT	0x5054
-#define PCI_DEVICE_ID_ATI_RAGE128_PU	0x5055
-#define PCI_DEVICE_ID_ATI_RAGE128_PV	0x5056
-#define PCI_DEVICE_ID_ATI_RAGE128_PW	0x5057
-#define PCI_DEVICE_ID_ATI_RAGE128_PX	0x5058
-/* Rage128 M4 */
-/* Radeon R100 */
-#define PCI_DEVICE_ID_ATI_RADEON_QD	0x5144
-#define PCI_DEVICE_ID_ATI_RADEON_QE	0x5145
-#define PCI_DEVICE_ID_ATI_RADEON_QF	0x5146
-#define PCI_DEVICE_ID_ATI_RADEON_QG	0x5147
-/* Radeon RV100 (VE) */
-#define PCI_DEVICE_ID_ATI_RADEON_QY	0x5159
-#define PCI_DEVICE_ID_ATI_RADEON_QZ	0x515a
-/* Radeon R200 (8500) */
-#define PCI_DEVICE_ID_ATI_RADEON_QL	0x514c
-#define PCI_DEVICE_ID_ATI_RADEON_QN	0x514e
-#define PCI_DEVICE_ID_ATI_RADEON_QO	0x514f
-#define PCI_DEVICE_ID_ATI_RADEON_Ql	0x516c
-#define PCI_DEVICE_ID_ATI_RADEON_BB	0x4242
-/* Radeon R200 (9100) */
-#define PCI_DEVICE_ID_ATI_RADEON_QM	0x514d
-/* Radeon RV200 (7500) */
-#define PCI_DEVICE_ID_ATI_RADEON_QW	0x5157
-#define PCI_DEVICE_ID_ATI_RADEON_QX	0x5158
-/* Radeon NV-100 */
-/* Radeon RV250 (9000) */
-#define PCI_DEVICE_ID_ATI_RADEON_Id	0x4964
-#define PCI_DEVICE_ID_ATI_RADEON_Ie	0x4965
-#define PCI_DEVICE_ID_ATI_RADEON_If	0x4966
-#define PCI_DEVICE_ID_ATI_RADEON_Ig	0x4967
-/* Radeon RV280 (9200) */
-#define PCI_DEVICE_ID_ATI_RADEON_Ya	0x5961
-#define PCI_DEVICE_ID_ATI_RADEON_Yd	0x5964
-/* Radeon R300 (9500) */
-/* Radeon R300 (9700) */
-#define PCI_DEVICE_ID_ATI_RADEON_ND	0x4e44
-#define PCI_DEVICE_ID_ATI_RADEON_NE	0x4e45
-#define PCI_DEVICE_ID_ATI_RADEON_NF	0x4e46
-#define PCI_DEVICE_ID_ATI_RADEON_NG	0x4e47
-/* Radeon R350 (9800) */
-/* Radeon RV350 (9600) */
-/* Radeon M6 */
-#define PCI_DEVICE_ID_ATI_RADEON_LY	0x4c59
-#define PCI_DEVICE_ID_ATI_RADEON_LZ	0x4c5a
-/* Radeon M7 */
-#define PCI_DEVICE_ID_ATI_RADEON_LW	0x4c57
-#define PCI_DEVICE_ID_ATI_RADEON_LX	0x4c58
-/* Radeon M9 */
-#define PCI_DEVICE_ID_ATI_RADEON_Ld	0x4c64
-#define PCI_DEVICE_ID_ATI_RADEON_Le	0x4c65
-#define PCI_DEVICE_ID_ATI_RADEON_Lf	0x4c66
-#define PCI_DEVICE_ID_ATI_RADEON_Lg	0x4c67
-/* Radeon */
-/* RadeonIGP */
-#define PCI_DEVICE_ID_ATI_RS100		0xcab0
-#define PCI_DEVICE_ID_ATI_RS200		0xcab2
-#define PCI_DEVICE_ID_ATI_RS200_B	0xcbb2
-#define PCI_DEVICE_ID_ATI_RS250		0xcab3
-#define PCI_DEVICE_ID_ATI_RS300_100	0x5830
-#define PCI_DEVICE_ID_ATI_RS300_133	0x5831
-#define PCI_DEVICE_ID_ATI_RS300_166	0x5832
-#define PCI_DEVICE_ID_ATI_RS300_200	0x5833
-#define PCI_DEVICE_ID_ATI_RS350_100     0x7830
-#define PCI_DEVICE_ID_ATI_RS350_133     0x7831
-#define PCI_DEVICE_ID_ATI_RS350_166     0x7832
-#define PCI_DEVICE_ID_ATI_RS350_200     0x7833
-#define PCI_DEVICE_ID_ATI_RS400_100     0x5a30
-#define PCI_DEVICE_ID_ATI_RS400_133     0x5a31
-#define PCI_DEVICE_ID_ATI_RS400_166     0x5a32
-#define PCI_DEVICE_ID_ATI_RS400_200     0x5a33
-#define PCI_DEVICE_ID_ATI_RS480         0x5950
-/* ATI IXP Chipset */
-#define PCI_DEVICE_ID_ATI_IXP200_IDE	0x4349
-#define PCI_DEVICE_ID_ATI_IXP200_SMBUS	0x4353
-#define PCI_DEVICE_ID_ATI_IXP300_SMBUS	0x4363
-#define PCI_DEVICE_ID_ATI_IXP300_IDE	0x4369
-#define PCI_DEVICE_ID_ATI_IXP300_SATA   0x436e
-#define PCI_DEVICE_ID_ATI_IXP400_SMBUS	0x4372
-#define PCI_DEVICE_ID_ATI_IXP400_IDE	0x4376
-#define PCI_DEVICE_ID_ATI_IXP400_SATA   0x4379
-#define PCI_DEVICE_ID_ATI_IXP400_SATA2	0x437a
-#define PCI_DEVICE_ID_ATI_IXP600_SATA	0x4380
-#define PCI_DEVICE_ID_ATI_SBX00_SMBUS	0x4385
-#define PCI_DEVICE_ID_ATI_IXP600_IDE	0x438c
-#define PCI_DEVICE_ID_ATI_IXP700_SATA	0x4390
-#define PCI_DEVICE_ID_ATI_IXP700_IDE	0x439c
-
-#define PCI_VENDOR_ID_VLSI		0x1004
-#define PCI_DEVICE_ID_VLSI_82C592	0x0005
-#define PCI_DEVICE_ID_VLSI_82C593	0x0006
-#define PCI_DEVICE_ID_VLSI_82C594	0x0007
-#define PCI_DEVICE_ID_VLSI_82C597	0x0009
-#define PCI_DEVICE_ID_VLSI_82C541	0x000c
-#define PCI_DEVICE_ID_VLSI_82C543	0x000d
-#define PCI_DEVICE_ID_VLSI_82C532	0x0101
-#define PCI_DEVICE_ID_VLSI_82C534	0x0102
-#define PCI_DEVICE_ID_VLSI_82C535	0x0104
-#define PCI_DEVICE_ID_VLSI_82C147	0x0105
-#define PCI_DEVICE_ID_VLSI_VAS96011	0x0702
-
-/* AMD RD890 Chipset */
-#define PCI_DEVICE_ID_RD890_IOMMU	0x5a23
-
-#define PCI_VENDOR_ID_ADL		0x1005
-#define PCI_DEVICE_ID_ADL_2301		0x2301
-
-#define PCI_VENDOR_ID_NS		0x100b
-#define PCI_DEVICE_ID_NS_87415		0x0002
-#define PCI_DEVICE_ID_NS_87560_LIO	0x000e
-#define PCI_DEVICE_ID_NS_87560_USB	0x0012
-#define PCI_DEVICE_ID_NS_83815		0x0020
-#define PCI_DEVICE_ID_NS_83820		0x0022
-#define PCI_DEVICE_ID_NS_CS5535_ISA	0x002b
-#define PCI_DEVICE_ID_NS_CS5535_IDE	0x002d
-#define PCI_DEVICE_ID_NS_CS5535_AUDIO	0x002e
-#define PCI_DEVICE_ID_NS_CS5535_USB	0x002f
-#define PCI_DEVICE_ID_NS_GX_VIDEO	0x0030
-#define PCI_DEVICE_ID_NS_SATURN		0x0035
-#define PCI_DEVICE_ID_NS_SCx200_BRIDGE	0x0500
-#define PCI_DEVICE_ID_NS_SCx200_SMI	0x0501
-#define PCI_DEVICE_ID_NS_SCx200_IDE	0x0502
-#define PCI_DEVICE_ID_NS_SCx200_AUDIO	0x0503
-#define PCI_DEVICE_ID_NS_SCx200_VIDEO	0x0504
-#define PCI_DEVICE_ID_NS_SCx200_XBUS	0x0505
-#define PCI_DEVICE_ID_NS_SC1100_BRIDGE	0x0510
-#define PCI_DEVICE_ID_NS_SC1100_SMI	0x0511
-#define PCI_DEVICE_ID_NS_SC1100_XBUS	0x0515
-#define PCI_DEVICE_ID_NS_87410		0xd001
-
-#define PCI_DEVICE_ID_NS_GX_HOST_BRIDGE  0x0028
-
-#define PCI_VENDOR_ID_TSENG		0x100c
-#define PCI_DEVICE_ID_TSENG_W32P_2	0x3202
-#define PCI_DEVICE_ID_TSENG_W32P_b	0x3205
-#define PCI_DEVICE_ID_TSENG_W32P_c	0x3206
-#define PCI_DEVICE_ID_TSENG_W32P_d	0x3207
-#define PCI_DEVICE_ID_TSENG_ET6000	0x3208
-
-#define PCI_VENDOR_ID_WEITEK		0x100e
-#define PCI_DEVICE_ID_WEITEK_P9000	0x9001
-#define PCI_DEVICE_ID_WEITEK_P9100	0x9100
-
-#define PCI_VENDOR_ID_DEC		0x1011
-#define PCI_DEVICE_ID_DEC_BRD		0x0001
-#define PCI_DEVICE_ID_DEC_TULIP		0x0002
-#define PCI_DEVICE_ID_DEC_TGA		0x0004
-#define PCI_DEVICE_ID_DEC_TULIP_FAST	0x0009
-#define PCI_DEVICE_ID_DEC_TGA2		0x000D
-#define PCI_DEVICE_ID_DEC_FDDI		0x000F
-#define PCI_DEVICE_ID_DEC_TULIP_PLUS	0x0014
-#define PCI_DEVICE_ID_DEC_21142		0x0019
-#define PCI_DEVICE_ID_DEC_21052		0x0021
-#define PCI_DEVICE_ID_DEC_21150		0x0022
-#define PCI_DEVICE_ID_DEC_21152		0x0024
-#define PCI_DEVICE_ID_DEC_21153		0x0025
-#define PCI_DEVICE_ID_DEC_21154		0x0026
-#define PCI_DEVICE_ID_DEC_21285		0x1065
-#define PCI_DEVICE_ID_COMPAQ_42XX	0x0046
-
-#define PCI_VENDOR_ID_CIRRUS		0x1013
-#define PCI_DEVICE_ID_CIRRUS_7548	0x0038
-#define PCI_DEVICE_ID_CIRRUS_5430	0x00a0
-#define PCI_DEVICE_ID_CIRRUS_5434_4	0x00a4
-#define PCI_DEVICE_ID_CIRRUS_5434_8	0x00a8
-#define PCI_DEVICE_ID_CIRRUS_5436	0x00ac
-#define PCI_DEVICE_ID_CIRRUS_5446	0x00b8
-#define PCI_DEVICE_ID_CIRRUS_5480	0x00bc
-#define PCI_DEVICE_ID_CIRRUS_5462	0x00d0
-#define PCI_DEVICE_ID_CIRRUS_5464	0x00d4
-#define PCI_DEVICE_ID_CIRRUS_5465	0x00d6
-#define PCI_DEVICE_ID_CIRRUS_6729	0x1100
-#define PCI_DEVICE_ID_CIRRUS_6832	0x1110
-#define PCI_DEVICE_ID_CIRRUS_7543	0x1202
-#define PCI_DEVICE_ID_CIRRUS_4610	0x6001
-#define PCI_DEVICE_ID_CIRRUS_4612	0x6003
-#define PCI_DEVICE_ID_CIRRUS_4615	0x6004
-
-#define PCI_VENDOR_ID_IBM		0x1014
-#define PCI_DEVICE_ID_IBM_TR		0x0018
-#define PCI_DEVICE_ID_IBM_TR_WAKE	0x003e
-#define PCI_DEVICE_ID_IBM_CPC710_PCI64	0x00fc
-#define PCI_DEVICE_ID_IBM_SNIPE		0x0180
-#define PCI_DEVICE_ID_IBM_CITRINE		0x028C
-#define PCI_DEVICE_ID_IBM_GEMSTONE		0xB166
-#define PCI_DEVICE_ID_IBM_OBSIDIAN		0x02BD
-#define PCI_DEVICE_ID_IBM_ICOM_DEV_ID_1	0x0031
-#define PCI_DEVICE_ID_IBM_ICOM_DEV_ID_2	0x0219
-#define PCI_DEVICE_ID_IBM_ICOM_V2_TWO_PORTS_RVX		0x021A
-#define PCI_DEVICE_ID_IBM_ICOM_V2_ONE_PORT_RVX_ONE_PORT_MDM	0x0251
-#define PCI_DEVICE_ID_IBM_ICOM_V2_ONE_PORT_RVX_ONE_PORT_MDM_PCIE 0x0361
-#define PCI_DEVICE_ID_IBM_ICOM_FOUR_PORT_MODEL	0x252
-
-#define PCI_SUBVENDOR_ID_IBM		0x1014
-#define PCI_SUBDEVICE_ID_IBM_SATURN_SERIAL_ONE_PORT	0x03d4
-
-#define PCI_VENDOR_ID_UNISYS		0x1018
-#define PCI_DEVICE_ID_UNISYS_DMA_DIRECTOR 0x001C
-
-#define PCI_VENDOR_ID_COMPEX2		0x101a /* pci.ids says "AT&T GIS (NCR)" */
-#define PCI_DEVICE_ID_COMPEX2_100VG	0x0005
-
-#define PCI_VENDOR_ID_WD		0x101c
-#define PCI_DEVICE_ID_WD_90C		0xc24a
-
-#define PCI_VENDOR_ID_AMI		0x101e
-#define PCI_DEVICE_ID_AMI_MEGARAID3	0x1960
-#define PCI_DEVICE_ID_AMI_MEGARAID	0x9010
-#define PCI_DEVICE_ID_AMI_MEGARAID2	0x9060
-
-#define PCI_VENDOR_ID_AMD		0x1022
-#define PCI_DEVICE_ID_AMD_K8_NB		0x1100
-#define PCI_DEVICE_ID_AMD_K8_NB_ADDRMAP	0x1101
-#define PCI_DEVICE_ID_AMD_K8_NB_MEMCTL	0x1102
-#define PCI_DEVICE_ID_AMD_K8_NB_MISC	0x1103
-#define PCI_DEVICE_ID_AMD_10H_NB_HT	0x1200
-#define PCI_DEVICE_ID_AMD_10H_NB_MAP	0x1201
-#define PCI_DEVICE_ID_AMD_10H_NB_DRAM	0x1202
-#define PCI_DEVICE_ID_AMD_10H_NB_MISC	0x1203
-#define PCI_DEVICE_ID_AMD_10H_NB_LINK	0x1204
-#define PCI_DEVICE_ID_AMD_11H_NB_HT	0x1300
-#define PCI_DEVICE_ID_AMD_11H_NB_MAP	0x1301
-#define PCI_DEVICE_ID_AMD_11H_NB_DRAM	0x1302
-#define PCI_DEVICE_ID_AMD_11H_NB_MISC	0x1303
-#define PCI_DEVICE_ID_AMD_11H_NB_LINK	0x1304
-#define PCI_DEVICE_ID_AMD_15H_NB_F0	0x1600
-#define PCI_DEVICE_ID_AMD_15H_NB_F1	0x1601
-#define PCI_DEVICE_ID_AMD_15H_NB_F2	0x1602
-#define PCI_DEVICE_ID_AMD_15H_NB_F3	0x1603
-#define PCI_DEVICE_ID_AMD_15H_NB_F4	0x1604
-#define PCI_DEVICE_ID_AMD_15H_NB_F5	0x1605
-#define PCI_DEVICE_ID_AMD_CNB17H_F3	0x1703
-#define PCI_DEVICE_ID_AMD_LANCE		0x2000
-#define PCI_DEVICE_ID_AMD_LANCE_HOME	0x2001
-#define PCI_DEVICE_ID_AMD_SCSI		0x2020
-#define PCI_DEVICE_ID_AMD_SERENADE	0x36c0
-#define PCI_DEVICE_ID_AMD_FE_GATE_7006	0x7006
-#define PCI_DEVICE_ID_AMD_FE_GATE_7007	0x7007
-#define PCI_DEVICE_ID_AMD_FE_GATE_700C	0x700C
-#define PCI_DEVICE_ID_AMD_FE_GATE_700E	0x700E
-#define PCI_DEVICE_ID_AMD_COBRA_7401	0x7401
-#define PCI_DEVICE_ID_AMD_VIPER_7409	0x7409
-#define PCI_DEVICE_ID_AMD_VIPER_740B	0x740B
-#define PCI_DEVICE_ID_AMD_VIPER_7410	0x7410
-#define PCI_DEVICE_ID_AMD_VIPER_7411	0x7411
-#define PCI_DEVICE_ID_AMD_VIPER_7413	0x7413
-#define PCI_DEVICE_ID_AMD_VIPER_7440	0x7440
-#define PCI_DEVICE_ID_AMD_OPUS_7441	0x7441
-#define PCI_DEVICE_ID_AMD_OPUS_7443	0x7443
-#define PCI_DEVICE_ID_AMD_VIPER_7443	0x7443
-#define PCI_DEVICE_ID_AMD_OPUS_7445	0x7445
-#define PCI_DEVICE_ID_AMD_8111_PCI	0x7460
-#define PCI_DEVICE_ID_AMD_8111_LPC	0x7468
-#define PCI_DEVICE_ID_AMD_8111_IDE	0x7469
-#define PCI_DEVICE_ID_AMD_8111_SMBUS2	0x746a
-#define PCI_DEVICE_ID_AMD_8111_SMBUS	0x746b
-#define PCI_DEVICE_ID_AMD_8111_AUDIO	0x746d
-#define PCI_DEVICE_ID_AMD_8151_0	0x7454
-#define PCI_DEVICE_ID_AMD_8131_BRIDGE	0x7450
-#define PCI_DEVICE_ID_AMD_8131_APIC	0x7451
-#define PCI_DEVICE_ID_AMD_8132_BRIDGE	0x7458
-#define PCI_DEVICE_ID_AMD_HUDSON2_SMBUS	0x780b
-#define PCI_DEVICE_ID_AMD_CS5535_IDE    0x208F
-#define PCI_DEVICE_ID_AMD_CS5536_ISA    0x2090
-#define PCI_DEVICE_ID_AMD_CS5536_FLASH  0x2091
-#define PCI_DEVICE_ID_AMD_CS5536_AUDIO  0x2093
-#define PCI_DEVICE_ID_AMD_CS5536_OHC    0x2094
-#define PCI_DEVICE_ID_AMD_CS5536_EHC    0x2095
-#define PCI_DEVICE_ID_AMD_CS5536_UDC    0x2096
-#define PCI_DEVICE_ID_AMD_CS5536_UOC    0x2097
-#define PCI_DEVICE_ID_AMD_CS5536_IDE    0x209A
-#define PCI_DEVICE_ID_AMD_LX_VIDEO  0x2081
-#define PCI_DEVICE_ID_AMD_LX_AES    0x2082
-#define PCI_DEVICE_ID_AMD_HUDSON2_IDE		0x780c
-#define PCI_DEVICE_ID_AMD_HUDSON2_SATA_IDE	0x7800
-
-#define PCI_VENDOR_ID_TRIDENT		0x1023
-#define PCI_DEVICE_ID_TRIDENT_4DWAVE_DX	0x2000
-#define PCI_DEVICE_ID_TRIDENT_4DWAVE_NX	0x2001
-#define PCI_DEVICE_ID_TRIDENT_9320	0x9320
-#define PCI_DEVICE_ID_TRIDENT_9388	0x9388
-#define PCI_DEVICE_ID_TRIDENT_9397	0x9397
-#define PCI_DEVICE_ID_TRIDENT_939A	0x939A
-#define PCI_DEVICE_ID_TRIDENT_9520	0x9520
-#define PCI_DEVICE_ID_TRIDENT_9525	0x9525
-#define PCI_DEVICE_ID_TRIDENT_9420	0x9420
-#define PCI_DEVICE_ID_TRIDENT_9440	0x9440
-#define PCI_DEVICE_ID_TRIDENT_9660	0x9660
-#define PCI_DEVICE_ID_TRIDENT_9750	0x9750
-#define PCI_DEVICE_ID_TRIDENT_9850	0x9850
-#define PCI_DEVICE_ID_TRIDENT_9880	0x9880
-#define PCI_DEVICE_ID_TRIDENT_8400	0x8400
-#define PCI_DEVICE_ID_TRIDENT_8420	0x8420
-#define PCI_DEVICE_ID_TRIDENT_8500	0x8500
-
-#define PCI_VENDOR_ID_AI		0x1025
-#define PCI_DEVICE_ID_AI_M1435		0x1435
-
-#define PCI_VENDOR_ID_DELL		0x1028
-#define PCI_DEVICE_ID_DELL_RACIII	0x0008
-#define PCI_DEVICE_ID_DELL_RAC4		0x0012
-#define PCI_DEVICE_ID_DELL_PERC5	0x0015
-
-#define PCI_VENDOR_ID_MATROX		0x102B
-#define PCI_DEVICE_ID_MATROX_MGA_2	0x0518
-#define PCI_DEVICE_ID_MATROX_MIL	0x0519
-#define PCI_DEVICE_ID_MATROX_MYS	0x051A
-#define PCI_DEVICE_ID_MATROX_MIL_2	0x051b
-#define PCI_DEVICE_ID_MATROX_MYS_AGP	0x051e
-#define PCI_DEVICE_ID_MATROX_MIL_2_AGP	0x051f
-#define PCI_DEVICE_ID_MATROX_MGA_IMP	0x0d10
-#define PCI_DEVICE_ID_MATROX_G100_MM	0x1000
-#define PCI_DEVICE_ID_MATROX_G100_AGP	0x1001
-#define PCI_DEVICE_ID_MATROX_G200_PCI	0x0520
-#define PCI_DEVICE_ID_MATROX_G200_AGP	0x0521
-#define	PCI_DEVICE_ID_MATROX_G400	0x0525
-#define	PCI_DEVICE_ID_MATROX_G200EV_PCI	0x0530
-#define PCI_DEVICE_ID_MATROX_G550	0x2527
-#define PCI_DEVICE_ID_MATROX_VIA	0x4536
-
-#define PCI_VENDOR_ID_MOBILITY_ELECTRONICS	0x14f2
-
-#define PCI_VENDOR_ID_CT		0x102c
-#define PCI_DEVICE_ID_CT_69000		0x00c0
-#define PCI_DEVICE_ID_CT_65545		0x00d8
-#define PCI_DEVICE_ID_CT_65548		0x00dc
-#define PCI_DEVICE_ID_CT_65550		0x00e0
-#define PCI_DEVICE_ID_CT_65554		0x00e4
-#define PCI_DEVICE_ID_CT_65555		0x00e5
-
-#define PCI_VENDOR_ID_MIRO		0x1031
-#define PCI_DEVICE_ID_MIRO_36050	0x5601
-#define PCI_DEVICE_ID_MIRO_DC10PLUS	0x7efe
-#define PCI_DEVICE_ID_MIRO_DC30PLUS	0xd801
-
-#define PCI_VENDOR_ID_NEC		0x1033
-#define PCI_DEVICE_ID_NEC_CBUS_1	0x0001 /* PCI-Cbus Bridge */
-#define PCI_DEVICE_ID_NEC_LOCAL		0x0002 /* Local Bridge */
-#define PCI_DEVICE_ID_NEC_ATM		0x0003 /* ATM LAN Controller */
-#define PCI_DEVICE_ID_NEC_R4000		0x0004 /* R4000 Bridge */
-#define PCI_DEVICE_ID_NEC_486		0x0005 /* 486 Like Peripheral Bus Bridge */
-#define PCI_DEVICE_ID_NEC_ACCEL_1	0x0006 /* Graphic Accelerator */
-#define PCI_DEVICE_ID_NEC_UXBUS		0x0007 /* UX-Bus Bridge */
-#define PCI_DEVICE_ID_NEC_ACCEL_2	0x0008 /* Graphic Accelerator */
-#define PCI_DEVICE_ID_NEC_GRAPH		0x0009 /* PCI-CoreGraph Bridge */
-#define PCI_DEVICE_ID_NEC_VL		0x0016 /* PCI-VL Bridge */
-#define PCI_DEVICE_ID_NEC_STARALPHA2	0x002c /* STAR ALPHA2 */
-#define PCI_DEVICE_ID_NEC_CBUS_2	0x002d /* PCI-Cbus Bridge */
-#define PCI_DEVICE_ID_NEC_USB		0x0035 /* PCI-USB Host */
-#define PCI_DEVICE_ID_NEC_CBUS_3	0x003b
-#define PCI_DEVICE_ID_NEC_NAPCCARD	0x003e
-#define PCI_DEVICE_ID_NEC_PCX2		0x0046 /* PowerVR */
-#define PCI_DEVICE_ID_NEC_VRC5476       0x009b
-#define PCI_DEVICE_ID_NEC_VRC4173	0x00a5
-#define PCI_DEVICE_ID_NEC_VRC5477_AC97  0x00a6
-#define PCI_DEVICE_ID_NEC_PC9821CS01    0x800c /* PC-9821-CS01 */
-#define PCI_DEVICE_ID_NEC_PC9821NRB06   0x800d /* PC-9821NR-B06 */
-
-#define PCI_VENDOR_ID_FD		0x1036
-#define PCI_DEVICE_ID_FD_36C70		0x0000
-
-#define PCI_VENDOR_ID_SI		0x1039
-#define PCI_DEVICE_ID_SI_5591_AGP	0x0001
-#define PCI_DEVICE_ID_SI_6202		0x0002
-#define PCI_DEVICE_ID_SI_503		0x0008
-#define PCI_DEVICE_ID_SI_ACPI		0x0009
-#define PCI_DEVICE_ID_SI_SMBUS		0x0016
-#define PCI_DEVICE_ID_SI_LPC		0x0018
-#define PCI_DEVICE_ID_SI_5597_VGA	0x0200
-#define PCI_DEVICE_ID_SI_6205		0x0205
-#define PCI_DEVICE_ID_SI_501		0x0406
-#define PCI_DEVICE_ID_SI_496		0x0496
-#define PCI_DEVICE_ID_SI_300		0x0300
-#define PCI_DEVICE_ID_SI_315H		0x0310
-#define PCI_DEVICE_ID_SI_315		0x0315
-#define PCI_DEVICE_ID_SI_315PRO		0x0325
-#define PCI_DEVICE_ID_SI_530		0x0530
-#define PCI_DEVICE_ID_SI_540		0x0540
-#define PCI_DEVICE_ID_SI_550		0x0550
-#define PCI_DEVICE_ID_SI_540_VGA	0x5300
-#define PCI_DEVICE_ID_SI_550_VGA	0x5315
-#define PCI_DEVICE_ID_SI_620		0x0620
-#define PCI_DEVICE_ID_SI_630		0x0630
-#define PCI_DEVICE_ID_SI_633		0x0633
-#define PCI_DEVICE_ID_SI_635		0x0635
-#define PCI_DEVICE_ID_SI_640		0x0640
-#define PCI_DEVICE_ID_SI_645		0x0645
-#define PCI_DEVICE_ID_SI_646		0x0646
-#define PCI_DEVICE_ID_SI_648		0x0648
-#define PCI_DEVICE_ID_SI_650		0x0650
-#define PCI_DEVICE_ID_SI_651		0x0651
-#define PCI_DEVICE_ID_SI_655		0x0655
-#define PCI_DEVICE_ID_SI_661		0x0661
-#define PCI_DEVICE_ID_SI_730		0x0730
-#define PCI_DEVICE_ID_SI_733		0x0733
-#define PCI_DEVICE_ID_SI_630_VGA	0x6300
-#define PCI_DEVICE_ID_SI_735		0x0735
-#define PCI_DEVICE_ID_SI_740		0x0740
-#define PCI_DEVICE_ID_SI_741		0x0741
-#define PCI_DEVICE_ID_SI_745		0x0745
-#define PCI_DEVICE_ID_SI_746		0x0746
-#define PCI_DEVICE_ID_SI_755		0x0755
-#define PCI_DEVICE_ID_SI_760		0x0760
-#define PCI_DEVICE_ID_SI_900		0x0900
-#define PCI_DEVICE_ID_SI_961		0x0961
-#define PCI_DEVICE_ID_SI_962		0x0962
-#define PCI_DEVICE_ID_SI_963		0x0963
-#define PCI_DEVICE_ID_SI_965		0x0965
-#define PCI_DEVICE_ID_SI_966		0x0966
-#define PCI_DEVICE_ID_SI_968		0x0968
-#define PCI_DEVICE_ID_SI_1180		0x1180
-#define PCI_DEVICE_ID_SI_5511		0x5511
-#define PCI_DEVICE_ID_SI_5513		0x5513
-#define PCI_DEVICE_ID_SI_5517		0x5517
-#define PCI_DEVICE_ID_SI_5518		0x5518
-#define PCI_DEVICE_ID_SI_5571		0x5571
-#define PCI_DEVICE_ID_SI_5581		0x5581
-#define PCI_DEVICE_ID_SI_5582		0x5582
-#define PCI_DEVICE_ID_SI_5591		0x5591
-#define PCI_DEVICE_ID_SI_5596		0x5596
-#define PCI_DEVICE_ID_SI_5597		0x5597
-#define PCI_DEVICE_ID_SI_5598		0x5598
-#define PCI_DEVICE_ID_SI_5600		0x5600
-#define PCI_DEVICE_ID_SI_7012		0x7012
-#define PCI_DEVICE_ID_SI_7013		0x7013
-#define PCI_DEVICE_ID_SI_7016		0x7016
-#define PCI_DEVICE_ID_SI_7018		0x7018
-
-#define PCI_VENDOR_ID_HP		0x103c
-#define PCI_DEVICE_ID_HP_VISUALIZE_EG	0x1005
-#define PCI_DEVICE_ID_HP_VISUALIZE_FX6	0x1006
-#define PCI_DEVICE_ID_HP_VISUALIZE_FX4	0x1008
-#define PCI_DEVICE_ID_HP_VISUALIZE_FX2	0x100a
-#define PCI_DEVICE_ID_HP_TACHYON	0x1028
-#define PCI_DEVICE_ID_HP_TACHLITE	0x1029
-#define PCI_DEVICE_ID_HP_J2585A		0x1030
-#define PCI_DEVICE_ID_HP_J2585B		0x1031
-#define PCI_DEVICE_ID_HP_J2973A		0x1040
-#define PCI_DEVICE_ID_HP_J2970A		0x1042
-#define PCI_DEVICE_ID_HP_DIVA		0x1048
-#define PCI_DEVICE_ID_HP_DIVA_TOSCA1	0x1049
-#define PCI_DEVICE_ID_HP_DIVA_TOSCA2	0x104A
-#define PCI_DEVICE_ID_HP_DIVA_MAESTRO	0x104B
-#define PCI_DEVICE_ID_HP_REO_IOC	0x10f1
-#define PCI_DEVICE_ID_HP_VISUALIZE_FXE	0x108b
-#define PCI_DEVICE_ID_HP_DIVA_HALFDOME	0x1223
-#define PCI_DEVICE_ID_HP_DIVA_KEYSTONE	0x1226
-#define PCI_DEVICE_ID_HP_DIVA_POWERBAR	0x1227
-#define PCI_DEVICE_ID_HP_ZX1_IOC	0x122a
-#define PCI_DEVICE_ID_HP_PCIX_LBA	0x122e
-#define PCI_DEVICE_ID_HP_SX1000_IOC	0x127c
-#define PCI_DEVICE_ID_HP_DIVA_EVEREST	0x1282
-#define PCI_DEVICE_ID_HP_DIVA_AUX	0x1290
-#define PCI_DEVICE_ID_HP_DIVA_RMP3	0x1301
-#define PCI_DEVICE_ID_HP_DIVA_HURRICANE	0x132a
-#define PCI_DEVICE_ID_HP_CISSA		0x3220
-#define PCI_DEVICE_ID_HP_CISSC		0x3230
-#define PCI_DEVICE_ID_HP_CISSD		0x3238
-#define PCI_DEVICE_ID_HP_CISSE		0x323a
-#define PCI_DEVICE_ID_HP_CISSF		0x323b
-#define PCI_DEVICE_ID_HP_ZX2_IOC	0x4031
-
-#define PCI_VENDOR_ID_PCTECH		0x1042
-#define PCI_DEVICE_ID_PCTECH_RZ1000	0x1000
-#define PCI_DEVICE_ID_PCTECH_RZ1001	0x1001
-#define PCI_DEVICE_ID_PCTECH_SAMURAI_IDE 0x3020
-
-#define PCI_VENDOR_ID_ASUSTEK		0x1043
-#define PCI_DEVICE_ID_ASUSTEK_0675	0x0675
-
-#define PCI_VENDOR_ID_DPT		0x1044
-#define PCI_DEVICE_ID_DPT		0xa400
-
-#define PCI_VENDOR_ID_OPTI		0x1045
-#define PCI_DEVICE_ID_OPTI_82C558	0xc558
-#define PCI_DEVICE_ID_OPTI_82C621	0xc621
-#define PCI_DEVICE_ID_OPTI_82C700	0xc700
-#define PCI_DEVICE_ID_OPTI_82C825	0xd568
-
-#define PCI_VENDOR_ID_ELSA		0x1048
-#define PCI_DEVICE_ID_ELSA_MICROLINK	0x1000
-#define PCI_DEVICE_ID_ELSA_QS3000	0x3000
-
-#define PCI_VENDOR_ID_STMICRO		0x104A
-#define PCI_DEVICE_ID_STMICRO_USB_HOST	0xCC00
-#define PCI_DEVICE_ID_STMICRO_USB_OHCI	0xCC01
-#define PCI_DEVICE_ID_STMICRO_USB_OTG	0xCC02
-#define PCI_DEVICE_ID_STMICRO_UART_HWFC 0xCC03
-#define PCI_DEVICE_ID_STMICRO_UART_NO_HWFC	0xCC04
-#define PCI_DEVICE_ID_STMICRO_SOC_DMA	0xCC05
-#define PCI_DEVICE_ID_STMICRO_SATA	0xCC06
-#define PCI_DEVICE_ID_STMICRO_I2C	0xCC07
-#define PCI_DEVICE_ID_STMICRO_SPI_HS	0xCC08
-#define PCI_DEVICE_ID_STMICRO_MAC	0xCC09
-#define PCI_DEVICE_ID_STMICRO_SDIO_EMMC 0xCC0A
-#define PCI_DEVICE_ID_STMICRO_SDIO	0xCC0B
-#define PCI_DEVICE_ID_STMICRO_GPIO	0xCC0C
-#define PCI_DEVICE_ID_STMICRO_VIP	0xCC0D
-#define PCI_DEVICE_ID_STMICRO_AUDIO_ROUTER_DMA	0xCC0E
-#define PCI_DEVICE_ID_STMICRO_AUDIO_ROUTER_SRCS 0xCC0F
-#define PCI_DEVICE_ID_STMICRO_AUDIO_ROUTER_MSPS 0xCC10
-#define PCI_DEVICE_ID_STMICRO_CAN	0xCC11
-#define PCI_DEVICE_ID_STMICRO_MLB	0xCC12
-#define PCI_DEVICE_ID_STMICRO_DBP	0xCC13
-#define PCI_DEVICE_ID_STMICRO_SATA_PHY	0xCC14
-#define PCI_DEVICE_ID_STMICRO_ESRAM	0xCC15
-#define PCI_DEVICE_ID_STMICRO_VIC	0xCC16
-
-#define PCI_VENDOR_ID_BUSLOGIC		      0x104B
-#define PCI_DEVICE_ID_BUSLOGIC_MULTIMASTER_NC 0x0140
-#define PCI_DEVICE_ID_BUSLOGIC_MULTIMASTER    0x1040
-#define PCI_DEVICE_ID_BUSLOGIC_FLASHPOINT     0x8130
-
-#define PCI_VENDOR_ID_TI		0x104c
-#define PCI_DEVICE_ID_TI_TVP4020	0x3d07
-#define PCI_DEVICE_ID_TI_4450		0x8011
-#define PCI_DEVICE_ID_TI_XX21_XX11	0x8031
-#define PCI_DEVICE_ID_TI_XX21_XX11_FM	0x8033
-#define PCI_DEVICE_ID_TI_XX21_XX11_SD	0x8034
-#define PCI_DEVICE_ID_TI_X515		0x8036
-#define PCI_DEVICE_ID_TI_XX12		0x8039
-#define PCI_DEVICE_ID_TI_XX12_FM	0x803b
-#define PCI_DEVICE_ID_TI_XIO2000A	0x8231
-#define PCI_DEVICE_ID_TI_1130		0xac12
-#define PCI_DEVICE_ID_TI_1031		0xac13
-#define PCI_DEVICE_ID_TI_1131		0xac15
-#define PCI_DEVICE_ID_TI_1250		0xac16
-#define PCI_DEVICE_ID_TI_1220		0xac17
-#define PCI_DEVICE_ID_TI_1221		0xac19
-#define PCI_DEVICE_ID_TI_1210		0xac1a
-#define PCI_DEVICE_ID_TI_1450		0xac1b
-#define PCI_DEVICE_ID_TI_1225		0xac1c
-#define PCI_DEVICE_ID_TI_1251A		0xac1d
-#define PCI_DEVICE_ID_TI_1211		0xac1e
-#define PCI_DEVICE_ID_TI_1251B		0xac1f
-#define PCI_DEVICE_ID_TI_4410		0xac41
-#define PCI_DEVICE_ID_TI_4451		0xac42
-#define PCI_DEVICE_ID_TI_4510		0xac44
-#define PCI_DEVICE_ID_TI_4520		0xac46
-#define PCI_DEVICE_ID_TI_7510		0xac47
-#define PCI_DEVICE_ID_TI_7610		0xac48
-#define PCI_DEVICE_ID_TI_7410		0xac49
-#define PCI_DEVICE_ID_TI_1410		0xac50
-#define PCI_DEVICE_ID_TI_1420		0xac51
-#define PCI_DEVICE_ID_TI_1451A		0xac52
-#define PCI_DEVICE_ID_TI_1620		0xac54
-#define PCI_DEVICE_ID_TI_1520		0xac55
-#define PCI_DEVICE_ID_TI_1510		0xac56
-#define PCI_DEVICE_ID_TI_X620		0xac8d
-#define PCI_DEVICE_ID_TI_X420		0xac8e
-#define PCI_DEVICE_ID_TI_XX20_FM	0xac8f
-
-#define PCI_VENDOR_ID_SONY		0x104d
-
-/* Winbond have two vendor IDs! See 0x10ad as well */
-#define PCI_VENDOR_ID_WINBOND2		0x1050
-#define PCI_DEVICE_ID_WINBOND2_89C940F	0x5a5a
-#define PCI_DEVICE_ID_WINBOND2_6692	0x6692
-
-#define PCI_VENDOR_ID_ANIGMA		0x1051
-#define PCI_DEVICE_ID_ANIGMA_MC145575	0x0100
-
-#define PCI_VENDOR_ID_EFAR		0x1055
-#define PCI_DEVICE_ID_EFAR_SLC90E66_1	0x9130
-#define PCI_DEVICE_ID_EFAR_SLC90E66_3	0x9463
-
-#define PCI_VENDOR_ID_MOTOROLA		0x1057
-#define PCI_DEVICE_ID_MOTOROLA_MPC105	0x0001
-#define PCI_DEVICE_ID_MOTOROLA_MPC106	0x0002
-#define PCI_DEVICE_ID_MOTOROLA_MPC107	0x0004
-#define PCI_DEVICE_ID_MOTOROLA_RAVEN	0x4801
-#define PCI_DEVICE_ID_MOTOROLA_FALCON	0x4802
-#define PCI_DEVICE_ID_MOTOROLA_HAWK	0x4803
-#define PCI_DEVICE_ID_MOTOROLA_HARRIER	0x480b
-#define PCI_DEVICE_ID_MOTOROLA_MPC5200	0x5803
-#define PCI_DEVICE_ID_MOTOROLA_MPC5200B	0x5809
-
-#define PCI_VENDOR_ID_PROMISE		0x105a
-#define PCI_DEVICE_ID_PROMISE_20265	0x0d30
-#define PCI_DEVICE_ID_PROMISE_20267	0x4d30
-#define PCI_DEVICE_ID_PROMISE_20246	0x4d33
-#define PCI_DEVICE_ID_PROMISE_20262	0x4d38
-#define PCI_DEVICE_ID_PROMISE_20263	0x0D38
-#define PCI_DEVICE_ID_PROMISE_20268	0x4d68
-#define PCI_DEVICE_ID_PROMISE_20269	0x4d69
-#define PCI_DEVICE_ID_PROMISE_20270	0x6268
-#define PCI_DEVICE_ID_PROMISE_20271	0x6269
-#define PCI_DEVICE_ID_PROMISE_20275	0x1275
-#define PCI_DEVICE_ID_PROMISE_20276	0x5275
-#define PCI_DEVICE_ID_PROMISE_20277	0x7275
-
-#define PCI_VENDOR_ID_FOXCONN		0x105b
-
-#define PCI_VENDOR_ID_UMC		0x1060
-#define PCI_DEVICE_ID_UMC_UM8673F	0x0101
-#define PCI_DEVICE_ID_UMC_UM8886BF	0x673a
-#define PCI_DEVICE_ID_UMC_UM8886A	0x886a
-
-#define PCI_VENDOR_ID_PICOPOWER		0x1066
-#define PCI_DEVICE_ID_PICOPOWER_PT86C523	0x0002
-#define PCI_DEVICE_ID_PICOPOWER_PT86C523BBP	0x8002
-
-#define PCI_VENDOR_ID_MYLEX		0x1069
-#define PCI_DEVICE_ID_MYLEX_DAC960_P	0x0001
-#define PCI_DEVICE_ID_MYLEX_DAC960_PD	0x0002
-#define PCI_DEVICE_ID_MYLEX_DAC960_PG	0x0010
-#define PCI_DEVICE_ID_MYLEX_DAC960_LA	0x0020
-#define PCI_DEVICE_ID_MYLEX_DAC960_LP	0x0050
-#define PCI_DEVICE_ID_MYLEX_DAC960_BA	0xBA56
-#define PCI_DEVICE_ID_MYLEX_DAC960_GEM	0xB166
-
-#define PCI_VENDOR_ID_APPLE		0x106b
-#define PCI_DEVICE_ID_APPLE_BANDIT	0x0001
-#define PCI_DEVICE_ID_APPLE_HYDRA	0x000e
-#define PCI_DEVICE_ID_APPLE_UNI_N_FW	0x0018
-#define PCI_DEVICE_ID_APPLE_UNI_N_AGP	0x0020
-#define PCI_DEVICE_ID_APPLE_UNI_N_GMAC	0x0021
-#define PCI_DEVICE_ID_APPLE_UNI_N_GMACP	0x0024
-#define PCI_DEVICE_ID_APPLE_UNI_N_AGP_P	0x0027
-#define PCI_DEVICE_ID_APPLE_UNI_N_AGP15	0x002d
-#define PCI_DEVICE_ID_APPLE_UNI_N_PCI15	0x002e
-#define PCI_DEVICE_ID_APPLE_UNI_N_GMAC2	0x0032
-#define PCI_DEVICE_ID_APPLE_UNI_N_ATA	0x0033
-#define PCI_DEVICE_ID_APPLE_UNI_N_AGP2	0x0034
-#define PCI_DEVICE_ID_APPLE_IPID_ATA100	0x003b
-#define PCI_DEVICE_ID_APPLE_K2_ATA100	0x0043
-#define PCI_DEVICE_ID_APPLE_U3_AGP	0x004b
-#define PCI_DEVICE_ID_APPLE_K2_GMAC	0x004c
-#define PCI_DEVICE_ID_APPLE_SH_ATA      0x0050
-#define PCI_DEVICE_ID_APPLE_SH_SUNGEM   0x0051
-#define PCI_DEVICE_ID_APPLE_U3L_AGP	0x0058
-#define PCI_DEVICE_ID_APPLE_U3H_AGP	0x0059
-#define PCI_DEVICE_ID_APPLE_U4_PCIE	0x005b
-#define PCI_DEVICE_ID_APPLE_IPID2_AGP	0x0066
-#define PCI_DEVICE_ID_APPLE_IPID2_ATA	0x0069
-#define PCI_DEVICE_ID_APPLE_IPID2_FW	0x006a
-#define PCI_DEVICE_ID_APPLE_IPID2_GMAC	0x006b
-#define PCI_DEVICE_ID_APPLE_TIGON3	0x1645
-
-#define PCI_VENDOR_ID_YAMAHA		0x1073
-#define PCI_DEVICE_ID_YAMAHA_724	0x0004
-#define PCI_DEVICE_ID_YAMAHA_724F	0x000d
-#define PCI_DEVICE_ID_YAMAHA_740	0x000a
-#define PCI_DEVICE_ID_YAMAHA_740C	0x000c
-#define PCI_DEVICE_ID_YAMAHA_744	0x0010
-#define PCI_DEVICE_ID_YAMAHA_754	0x0012
-
-#define PCI_VENDOR_ID_QLOGIC		0x1077
-#define PCI_DEVICE_ID_QLOGIC_ISP10160	0x1016
-#define PCI_DEVICE_ID_QLOGIC_ISP1020	0x1020
-#define PCI_DEVICE_ID_QLOGIC_ISP1080	0x1080
-#define PCI_DEVICE_ID_QLOGIC_ISP12160	0x1216
-#define PCI_DEVICE_ID_QLOGIC_ISP1240	0x1240
-#define PCI_DEVICE_ID_QLOGIC_ISP1280	0x1280
-#define PCI_DEVICE_ID_QLOGIC_ISP2100	0x2100
-#define PCI_DEVICE_ID_QLOGIC_ISP2200	0x2200
-#define PCI_DEVICE_ID_QLOGIC_ISP2300	0x2300
-#define PCI_DEVICE_ID_QLOGIC_ISP2312	0x2312
-#define PCI_DEVICE_ID_QLOGIC_ISP2322	0x2322
-#define PCI_DEVICE_ID_QLOGIC_ISP6312	0x6312
-#define PCI_DEVICE_ID_QLOGIC_ISP6322	0x6322
-#define PCI_DEVICE_ID_QLOGIC_ISP2422	0x2422
-#define PCI_DEVICE_ID_QLOGIC_ISP2432	0x2432
-#define PCI_DEVICE_ID_QLOGIC_ISP2512	0x2512
-#define PCI_DEVICE_ID_QLOGIC_ISP2522	0x2522
-#define PCI_DEVICE_ID_QLOGIC_ISP5422	0x5422
-#define PCI_DEVICE_ID_QLOGIC_ISP5432	0x5432
-
-#define PCI_VENDOR_ID_CYRIX		0x1078
-#define PCI_DEVICE_ID_CYRIX_5510	0x0000
-#define PCI_DEVICE_ID_CYRIX_PCI_MASTER	0x0001
-#define PCI_DEVICE_ID_CYRIX_5520	0x0002
-#define PCI_DEVICE_ID_CYRIX_5530_LEGACY	0x0100
-#define PCI_DEVICE_ID_CYRIX_5530_IDE	0x0102
-#define PCI_DEVICE_ID_CYRIX_5530_AUDIO	0x0103
-#define PCI_DEVICE_ID_CYRIX_5530_VIDEO	0x0104
-
-#define PCI_VENDOR_ID_CONTAQ		0x1080
-#define PCI_DEVICE_ID_CONTAQ_82C693	0xc693
-
-#define PCI_VENDOR_ID_OLICOM		0x108d
-#define PCI_DEVICE_ID_OLICOM_OC2325	0x0012
-#define PCI_DEVICE_ID_OLICOM_OC2183	0x0013
-#define PCI_DEVICE_ID_OLICOM_OC2326	0x0014
-
-#define PCI_VENDOR_ID_SUN		0x108e
-#define PCI_DEVICE_ID_SUN_EBUS		0x1000
-#define PCI_DEVICE_ID_SUN_HAPPYMEAL	0x1001
-#define PCI_DEVICE_ID_SUN_RIO_EBUS	0x1100
-#define PCI_DEVICE_ID_SUN_RIO_GEM	0x1101
-#define PCI_DEVICE_ID_SUN_RIO_1394	0x1102
-#define PCI_DEVICE_ID_SUN_RIO_USB	0x1103
-#define PCI_DEVICE_ID_SUN_GEM		0x2bad
-#define PCI_DEVICE_ID_SUN_SIMBA		0x5000
-#define PCI_DEVICE_ID_SUN_PBM		0x8000
-#define PCI_DEVICE_ID_SUN_SCHIZO	0x8001
-#define PCI_DEVICE_ID_SUN_SABRE		0xa000
-#define PCI_DEVICE_ID_SUN_HUMMINGBIRD	0xa001
-#define PCI_DEVICE_ID_SUN_TOMATILLO	0xa801
-#define PCI_DEVICE_ID_SUN_CASSINI	0xabba
-
-#define PCI_VENDOR_ID_NI		0x1093
-#define PCI_DEVICE_ID_NI_PCI2322	0xd130
-#define PCI_DEVICE_ID_NI_PCI2324	0xd140
-#define PCI_DEVICE_ID_NI_PCI2328	0xd150
-#define PCI_DEVICE_ID_NI_PXI8422_2322	0xd190
-#define PCI_DEVICE_ID_NI_PXI8422_2324	0xd1a0
-#define PCI_DEVICE_ID_NI_PXI8420_2322	0xd1d0
-#define PCI_DEVICE_ID_NI_PXI8420_2324	0xd1e0
-#define PCI_DEVICE_ID_NI_PXI8420_2328	0xd1f0
-#define PCI_DEVICE_ID_NI_PXI8420_23216	0xd1f1
-#define PCI_DEVICE_ID_NI_PCI2322I	0xd250
-#define PCI_DEVICE_ID_NI_PCI2324I	0xd270
-#define PCI_DEVICE_ID_NI_PCI23216	0xd2b0
-#define PCI_DEVICE_ID_NI_PXI8430_2322	0x7080
-#define PCI_DEVICE_ID_NI_PCI8430_2322	0x70db
-#define PCI_DEVICE_ID_NI_PXI8430_2324	0x70dd
-#define PCI_DEVICE_ID_NI_PCI8430_2324	0x70df
-#define PCI_DEVICE_ID_NI_PXI8430_2328	0x70e2
-#define PCI_DEVICE_ID_NI_PCI8430_2328	0x70e4
-#define PCI_DEVICE_ID_NI_PXI8430_23216	0x70e6
-#define PCI_DEVICE_ID_NI_PCI8430_23216	0x70e7
-#define PCI_DEVICE_ID_NI_PXI8432_2322	0x70e8
-#define PCI_DEVICE_ID_NI_PCI8432_2322	0x70ea
-#define PCI_DEVICE_ID_NI_PXI8432_2324	0x70ec
-#define PCI_DEVICE_ID_NI_PCI8432_2324	0x70ee
-
-#define PCI_VENDOR_ID_CMD		0x1095
-#define PCI_DEVICE_ID_CMD_643		0x0643
-#define PCI_DEVICE_ID_CMD_646		0x0646
-#define PCI_DEVICE_ID_CMD_648		0x0648
-#define PCI_DEVICE_ID_CMD_649		0x0649
-
-#define PCI_DEVICE_ID_SII_680		0x0680
-#define PCI_DEVICE_ID_SII_3112		0x3112
-#define PCI_DEVICE_ID_SII_1210SA	0x0240
-
-#define PCI_VENDOR_ID_BROOKTREE		0x109e
-#define PCI_DEVICE_ID_BROOKTREE_878	0x0878
-#define PCI_DEVICE_ID_BROOKTREE_879	0x0879
-
-#define PCI_VENDOR_ID_SGI		0x10a9
-#define PCI_DEVICE_ID_SGI_IOC3		0x0003
-#define PCI_DEVICE_ID_SGI_LITHIUM	0x1002
-#define PCI_DEVICE_ID_SGI_IOC4		0x100a
-
-#define PCI_VENDOR_ID_WINBOND		0x10ad
-#define PCI_DEVICE_ID_WINBOND_82C105	0x0105
-#define PCI_DEVICE_ID_WINBOND_83C553	0x0565
-
-#define PCI_VENDOR_ID_PLX		0x10b5
-#define PCI_DEVICE_ID_PLX_R685		0x1030
-#define PCI_DEVICE_ID_PLX_ROMULUS	0x106a
-#define PCI_DEVICE_ID_PLX_SPCOM800	0x1076
-#define PCI_DEVICE_ID_PLX_1077		0x1077
-#define PCI_DEVICE_ID_PLX_SPCOM200	0x1103
-#define PCI_DEVICE_ID_PLX_DJINN_ITOO	0x1151
-#define PCI_DEVICE_ID_PLX_R753		0x1152
-#define PCI_DEVICE_ID_PLX_OLITEC	0x1187
-#define PCI_DEVICE_ID_PLX_PCI200SYN	0x3196
-#define PCI_DEVICE_ID_PLX_9030          0x9030
-#define PCI_DEVICE_ID_PLX_9050		0x9050
-#define PCI_DEVICE_ID_PLX_9056		0x9056
-#define PCI_DEVICE_ID_PLX_9080		0x9080
-#define PCI_DEVICE_ID_PLX_GTEK_SERIAL2	0xa001
-
-#define PCI_VENDOR_ID_MADGE		0x10b6
-#define PCI_DEVICE_ID_MADGE_MK2		0x0002
-
-#define PCI_VENDOR_ID_3COM		0x10b7
-#define PCI_DEVICE_ID_3COM_3C985	0x0001
-#define PCI_DEVICE_ID_3COM_3C940	0x1700
-#define PCI_DEVICE_ID_3COM_3C339	0x3390
-#define PCI_DEVICE_ID_3COM_3C359	0x3590
-#define PCI_DEVICE_ID_3COM_3C940B	0x80eb
-#define PCI_DEVICE_ID_3COM_3CR990	0x9900
-#define PCI_DEVICE_ID_3COM_3CR990_TX_95	0x9902
-#define PCI_DEVICE_ID_3COM_3CR990_TX_97	0x9903
-#define PCI_DEVICE_ID_3COM_3CR990B	0x9904
-#define PCI_DEVICE_ID_3COM_3CR990_FX	0x9905
-#define PCI_DEVICE_ID_3COM_3CR990SVR95	0x9908
-#define PCI_DEVICE_ID_3COM_3CR990SVR97	0x9909
-#define PCI_DEVICE_ID_3COM_3CR990SVR	0x990a
-
-#define PCI_VENDOR_ID_AL		0x10b9
-#define PCI_DEVICE_ID_AL_M1533		0x1533
-#define PCI_DEVICE_ID_AL_M1535 		0x1535
-#define PCI_DEVICE_ID_AL_M1541		0x1541
-#define PCI_DEVICE_ID_AL_M1563		0x1563
-#define PCI_DEVICE_ID_AL_M1621		0x1621
-#define PCI_DEVICE_ID_AL_M1631		0x1631
-#define PCI_DEVICE_ID_AL_M1632		0x1632
-#define PCI_DEVICE_ID_AL_M1641		0x1641
-#define PCI_DEVICE_ID_AL_M1644		0x1644
-#define PCI_DEVICE_ID_AL_M1647		0x1647
-#define PCI_DEVICE_ID_AL_M1651		0x1651
-#define PCI_DEVICE_ID_AL_M1671		0x1671
-#define PCI_DEVICE_ID_AL_M1681		0x1681
-#define PCI_DEVICE_ID_AL_M1683		0x1683
-#define PCI_DEVICE_ID_AL_M1689		0x1689
-#define PCI_DEVICE_ID_AL_M5219		0x5219
-#define PCI_DEVICE_ID_AL_M5228		0x5228
-#define PCI_DEVICE_ID_AL_M5229		0x5229
-#define PCI_DEVICE_ID_AL_M5451		0x5451
-#define PCI_DEVICE_ID_AL_M7101		0x7101
-
-#define PCI_VENDOR_ID_NEOMAGIC		0x10c8
-#define PCI_DEVICE_ID_NEOMAGIC_NM256AV_AUDIO 0x8005
-#define PCI_DEVICE_ID_NEOMAGIC_NM256ZX_AUDIO 0x8006
-#define PCI_DEVICE_ID_NEOMAGIC_NM256XL_PLUS_AUDIO 0x8016
-
-#define PCI_VENDOR_ID_TCONRAD		0x10da
-#define PCI_DEVICE_ID_TCONRAD_TOKENRING	0x0508
-
-#define PCI_VENDOR_ID_NVIDIA			0x10de
-#define PCI_DEVICE_ID_NVIDIA_TNT		0x0020
-#define PCI_DEVICE_ID_NVIDIA_TNT2		0x0028
-#define PCI_DEVICE_ID_NVIDIA_UTNT2		0x0029
-#define PCI_DEVICE_ID_NVIDIA_TNT_UNKNOWN        0x002a
-#define PCI_DEVICE_ID_NVIDIA_VTNT2		0x002C
-#define PCI_DEVICE_ID_NVIDIA_UVTNT2		0x002D
-#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_SMBUS	0x0034
-#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_IDE	0x0035
-#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_SATA	0x0036
-#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_SATA2	0x003e
-#define PCI_DEVICE_ID_NVIDIA_GEFORCE_6800_ULTRA 0x0040
-#define PCI_DEVICE_ID_NVIDIA_GEFORCE_6800       0x0041
-#define PCI_DEVICE_ID_NVIDIA_GEFORCE_6800_LE    0x0042
-#define PCI_DEVICE_ID_NVIDIA_GEFORCE_6800_GT    0x0045
-#define PCI_DEVICE_ID_NVIDIA_QUADRO_FX_4000     0x004E
-#define PCI_DEVICE_ID_NVIDIA_NFORCE4_SMBUS	0x0052
-#define PCI_DEVICE_ID_NVIDIA_NFORCE_CK804_IDE	0x0053
-#define PCI_DEVICE_ID_NVIDIA_NFORCE_CK804_SATA	0x0054
-#define PCI_DEVICE_ID_NVIDIA_NFORCE_CK804_SATA2	0x0055
-#define PCI_DEVICE_ID_NVIDIA_CK804_AUDIO	0x0059
-#define PCI_DEVICE_ID_NVIDIA_CK804_PCIE		0x005d
-#define PCI_DEVICE_ID_NVIDIA_NFORCE2_SMBUS	0x0064
-#define PCI_DEVICE_ID_NVIDIA_NFORCE2_IDE	0x0065
-#define PCI_DEVICE_ID_NVIDIA_MCP2_MODEM		0x0069
-#define PCI_DEVICE_ID_NVIDIA_MCP2_AUDIO		0x006a
-#define PCI_DEVICE_ID_NVIDIA_NFORCE2S_SMBUS	0x0084
-#define PCI_DEVICE_ID_NVIDIA_NFORCE2S_IDE	0x0085
-#define PCI_DEVICE_ID_NVIDIA_MCP2S_MODEM	0x0089
-#define PCI_DEVICE_ID_NVIDIA_CK8_AUDIO		0x008a
-#define PCI_DEVICE_ID_NVIDIA_NFORCE2S_SATA	0x008e
-#define PCI_DEVICE_ID_NVIDIA_GEFORCE_7800_GT   0x0090
-#define PCI_DEVICE_ID_NVIDIA_GEFORCE_7800_GTX	0x0091
-#define PCI_DEVICE_ID_NVIDIA_GEFORCE_GO_7800   0x0098
-#define PCI_DEVICE_ID_NVIDIA_GEFORCE_GO_7800_GTX 0x0099
-#define PCI_DEVICE_ID_NVIDIA_ITNT2		0x00A0
-#define PCI_DEVICE_ID_GEFORCE_6800A             0x00c1
-#define PCI_DEVICE_ID_GEFORCE_6800A_LE          0x00c2
-#define PCI_DEVICE_ID_GEFORCE_GO_6800           0x00c8
-#define PCI_DEVICE_ID_GEFORCE_GO_6800_ULTRA     0x00c9
-#define PCI_DEVICE_ID_QUADRO_FX_GO1400          0x00cc
-#define PCI_DEVICE_ID_QUADRO_FX_1400            0x00ce
-#define PCI_DEVICE_ID_NVIDIA_NFORCE3		0x00d1
-#define PCI_DEVICE_ID_NVIDIA_NFORCE3_SMBUS	0x00d4
-#define PCI_DEVICE_ID_NVIDIA_NFORCE3_IDE	0x00d5
-#define PCI_DEVICE_ID_NVIDIA_MCP3_MODEM		0x00d9
-#define PCI_DEVICE_ID_NVIDIA_MCP3_AUDIO		0x00da
-#define PCI_DEVICE_ID_NVIDIA_NFORCE3S		0x00e1
-#define PCI_DEVICE_ID_NVIDIA_NFORCE3S_SATA	0x00e3
-#define PCI_DEVICE_ID_NVIDIA_NFORCE3S_SMBUS	0x00e4
-#define PCI_DEVICE_ID_NVIDIA_NFORCE3S_IDE	0x00e5
-#define PCI_DEVICE_ID_NVIDIA_CK8S_AUDIO		0x00ea
-#define PCI_DEVICE_ID_NVIDIA_NFORCE3S_SATA2	0x00ee
-#define PCIE_DEVICE_ID_NVIDIA_GEFORCE_6800_ALT1 0x00f0
-#define PCIE_DEVICE_ID_NVIDIA_GEFORCE_6600_ALT1 0x00f1
-#define PCIE_DEVICE_ID_NVIDIA_GEFORCE_6600_ALT2 0x00f2
-#define PCIE_DEVICE_ID_NVIDIA_GEFORCE_6200_ALT1 0x00f3
-#define PCIE_DEVICE_ID_NVIDIA_GEFORCE_6800_GT   0x00f9
-#define PCIE_DEVICE_ID_NVIDIA_QUADRO_NVS280	0x00fd
-#define PCI_DEVICE_ID_NVIDIA_GEFORCE_SDR	0x0100
-#define PCI_DEVICE_ID_NVIDIA_GEFORCE_DDR	0x0101
-#define PCI_DEVICE_ID_NVIDIA_QUADRO		0x0103
-#define PCI_DEVICE_ID_NVIDIA_GEFORCE2_MX	0x0110
-#define PCI_DEVICE_ID_NVIDIA_GEFORCE2_MX2	0x0111
-#define PCI_DEVICE_ID_NVIDIA_GEFORCE2_GO	0x0112
-#define PCI_DEVICE_ID_NVIDIA_QUADRO2_MXR	0x0113
-#define PCI_DEVICE_ID_NVIDIA_GEFORCE_6600_GT	0x0140
-#define PCI_DEVICE_ID_NVIDIA_GEFORCE_6600	0x0141
-#define PCI_DEVICE_ID_NVIDIA_GEFORCE_6610_XL	0x0145
-#define PCI_DEVICE_ID_NVIDIA_QUADRO_FX_540	0x014E
-#define PCI_DEVICE_ID_NVIDIA_GEFORCE_6200	0x014F
-#define PCI_DEVICE_ID_NVIDIA_GEFORCE2_GTS	0x0150
-#define PCI_DEVICE_ID_NVIDIA_GEFORCE2_GTS2	0x0151
-#define PCI_DEVICE_ID_NVIDIA_GEFORCE2_ULTRA	0x0152
-#define PCI_DEVICE_ID_NVIDIA_QUADRO2_PRO	0x0153
-#define PCI_DEVICE_ID_NVIDIA_GEFORCE_6200_TURBOCACHE 0x0161
-#define PCI_DEVICE_ID_NVIDIA_GEFORCE_GO_6200    0x0164
-#define PCI_DEVICE_ID_NVIDIA_GEFORCE_GO_6250    0x0166
-#define PCI_DEVICE_ID_NVIDIA_GEFORCE_GO_6200_1  0x0167
-#define PCI_DEVICE_ID_NVIDIA_GEFORCE_GO_6250_1  0x0168
-#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_MX_460	0x0170
-#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_MX_440	0x0171
-#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_MX_420	0x0172
-#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_MX_440_SE	0x0173
-#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_440_GO	0x0174
-#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_420_GO	0x0175
-#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_420_GO_M32 0x0176
-#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_460_GO    0x0177
-#define PCI_DEVICE_ID_NVIDIA_QUADRO4_500XGL	0x0178
-#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_440_GO_M64 0x0179
-#define PCI_DEVICE_ID_NVIDIA_QUADRO4_200	0x017A
-#define PCI_DEVICE_ID_NVIDIA_QUADRO4_550XGL	0x017B
-#define PCI_DEVICE_ID_NVIDIA_QUADRO4_500_GOGL	0x017C
-#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_410_GO_M16 0x017D
-#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_MX_440_8X 0x0181
-#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_MX_440SE_8X 0x0182
-#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_MX_420_8X 0x0183
-#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_MX_4000   0x0185
-#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_448_GO    0x0186
-#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_488_GO    0x0187
-#define PCI_DEVICE_ID_NVIDIA_QUADRO4_580_XGL    0x0188
-#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_MX_MAC    0x0189
-#define PCI_DEVICE_ID_NVIDIA_QUADRO4_280_NVS    0x018A
-#define PCI_DEVICE_ID_NVIDIA_QUADRO4_380_XGL    0x018B
-#define PCI_DEVICE_ID_NVIDIA_IGEFORCE2		0x01a0
-#define PCI_DEVICE_ID_NVIDIA_NFORCE		0x01a4
-#define PCI_DEVICE_ID_NVIDIA_MCP1_AUDIO		0x01b1
-#define PCI_DEVICE_ID_NVIDIA_NFORCE_SMBUS	0x01b4
-#define PCI_DEVICE_ID_NVIDIA_NFORCE_IDE		0x01bc
-#define PCI_DEVICE_ID_NVIDIA_MCP1_MODEM		0x01c1
-#define PCI_DEVICE_ID_NVIDIA_NFORCE2		0x01e0
-#define PCI_DEVICE_ID_NVIDIA_GEFORCE3		0x0200
-#define PCI_DEVICE_ID_NVIDIA_GEFORCE3_1		0x0201
-#define PCI_DEVICE_ID_NVIDIA_GEFORCE3_2		0x0202
-#define PCI_DEVICE_ID_NVIDIA_QUADRO_DDC		0x0203
-#define PCI_DEVICE_ID_NVIDIA_GEFORCE_6800B      0x0211
-#define PCI_DEVICE_ID_NVIDIA_GEFORCE_6800B_LE   0x0212
-#define PCI_DEVICE_ID_NVIDIA_GEFORCE_6800B_GT   0x0215
-#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_TI_4600	0x0250
-#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_TI_4400	0x0251
-#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_TI_4200	0x0253
-#define PCI_DEVICE_ID_NVIDIA_QUADRO4_900XGL	0x0258
-#define PCI_DEVICE_ID_NVIDIA_QUADRO4_750XGL	0x0259
-#define PCI_DEVICE_ID_NVIDIA_QUADRO4_700XGL	0x025B
-#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_SMBUS	0x0264
-#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_IDE	0x0265
-#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_SATA	0x0266
-#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_SATA2	0x0267
-#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_SMBUS	0x0368
-#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_IDE	0x036E
-#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_SATA	0x037E
-#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_SATA2	0x037F
-#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_TI_4800	0x0280
-#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_TI_4800_8X    0x0281
-#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_TI_4800SE     0x0282
-#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_4200_GO       0x0286
-#define PCI_DEVICE_ID_NVIDIA_QUADRO4_980_XGL        0x0288
-#define PCI_DEVICE_ID_NVIDIA_QUADRO4_780_XGL        0x0289
-#define PCI_DEVICE_ID_NVIDIA_QUADRO4_700_GOGL       0x028C
-#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5800_ULTRA  0x0301
-#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5800        0x0302
-#define PCI_DEVICE_ID_NVIDIA_QUADRO_FX_2000         0x0308
-#define PCI_DEVICE_ID_NVIDIA_QUADRO_FX_1000         0x0309
-#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5600_ULTRA  0x0311
-#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5600        0x0312
-#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5600SE      0x0314
-#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_GO5600      0x031A
-#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_GO5650      0x031B
-#define PCI_DEVICE_ID_NVIDIA_QUADRO_FX_GO700        0x031C
-#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5200        0x0320
-#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5200_ULTRA  0x0321
-#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5200_1      0x0322
-#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5200SE      0x0323
-#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_GO5200      0x0324
-#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_GO5250      0x0325
-#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5500        0x0326
-#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5100        0x0327
-#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_GO5250_32   0x0328
-#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_GO_5200	    0x0329
-#define PCI_DEVICE_ID_NVIDIA_QUADRO_NVS_280_PCI     0x032A
-#define PCI_DEVICE_ID_NVIDIA_QUADRO_FX_500          0x032B
-#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_GO5300      0x032C
-#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_GO5100      0x032D
-#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5900_ULTRA  0x0330
-#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5900        0x0331
-#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5900XT      0x0332
-#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5950_ULTRA  0x0333
-#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5900ZT      0x0334
-#define PCI_DEVICE_ID_NVIDIA_QUADRO_FX_3000         0x0338
-#define PCI_DEVICE_ID_NVIDIA_QUADRO_FX_700          0x033F
-#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5700_ULTRA  0x0341
-#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5700        0x0342
-#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5700LE      0x0343
-#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5700VE      0x0344
-#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_GO5700_1    0x0347
-#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_GO5700_2    0x0348
-#define PCI_DEVICE_ID_NVIDIA_QUADRO_FX_GO1000       0x034C
-#define PCI_DEVICE_ID_NVIDIA_QUADRO_FX_1100         0x034E
-#define PCI_DEVICE_ID_NVIDIA_MCP55_BRIDGE_V0	    0x0360
-#define PCI_DEVICE_ID_NVIDIA_MCP55_BRIDGE_V4	    0x0364
-#define PCI_DEVICE_ID_NVIDIA_NVENET_15              0x0373
-#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_SATA      0x03E7
-#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_SMBUS	    0x03EB
-#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_IDE       0x03EC
-#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_SATA2     0x03F6
-#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_SATA3     0x03F7
-#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP65_SMBUS	    0x0446
-#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP65_IDE	    0x0448
-#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP67_SMBUS     0x0542
-#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP67_IDE       0x0560
-#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP73_IDE       0x056C
-#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP78S_SMBUS    0x0752
-#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP77_IDE       0x0759
-#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP73_SMBUS     0x07D8
-#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP79_SMBUS     0x0AA2
-#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP89_SATA	    0x0D85
-
-#define PCI_VENDOR_ID_IMS		0x10e0
-#define PCI_DEVICE_ID_IMS_TT128		0x9128
-#define PCI_DEVICE_ID_IMS_TT3D		0x9135
-
-#define PCI_VENDOR_ID_INTERG		0x10ea
-#define PCI_DEVICE_ID_INTERG_1682	0x1682
-#define PCI_DEVICE_ID_INTERG_2000	0x2000
-#define PCI_DEVICE_ID_INTERG_2010	0x2010
-#define PCI_DEVICE_ID_INTERG_5000	0x5000
-#define PCI_DEVICE_ID_INTERG_5050	0x5050
-
-#define PCI_VENDOR_ID_REALTEK		0x10ec
-#define PCI_DEVICE_ID_REALTEK_8139	0x8139
-
-#define PCI_VENDOR_ID_XILINX		0x10ee
-#define PCI_DEVICE_ID_RME_DIGI96	0x3fc0
-#define PCI_DEVICE_ID_RME_DIGI96_8	0x3fc1
-#define PCI_DEVICE_ID_RME_DIGI96_8_PRO	0x3fc2
-#define PCI_DEVICE_ID_RME_DIGI96_8_PAD_OR_PST 0x3fc3
-#define PCI_DEVICE_ID_XILINX_HAMMERFALL_DSP 0x3fc5
-#define PCI_DEVICE_ID_XILINX_HAMMERFALL_DSP_MADI 0x3fc6
-
-#define PCI_VENDOR_ID_INIT		0x1101
-
-#define PCI_VENDOR_ID_CREATIVE		0x1102 /* duplicate: ECTIVA */
-#define PCI_DEVICE_ID_CREATIVE_EMU10K1	0x0002
-#define PCI_DEVICE_ID_CREATIVE_20K1	0x0005
-#define PCI_DEVICE_ID_CREATIVE_20K2	0x000b
-#define PCI_SUBDEVICE_ID_CREATIVE_SB0760	0x0024
-#define PCI_SUBDEVICE_ID_CREATIVE_SB08801	0x0041
-#define PCI_SUBDEVICE_ID_CREATIVE_SB08802	0x0042
-#define PCI_SUBDEVICE_ID_CREATIVE_SB08803	0x0043
-#define PCI_SUBDEVICE_ID_CREATIVE_SB1270	0x0062
-#define PCI_SUBDEVICE_ID_CREATIVE_HENDRIX	0x6000
-
-#define PCI_VENDOR_ID_ECTIVA		0x1102 /* duplicate: CREATIVE */
-#define PCI_DEVICE_ID_ECTIVA_EV1938	0x8938
-
-#define PCI_VENDOR_ID_TTI		0x1103
-#define PCI_DEVICE_ID_TTI_HPT343	0x0003
-#define PCI_DEVICE_ID_TTI_HPT366	0x0004
-#define PCI_DEVICE_ID_TTI_HPT372	0x0005
-#define PCI_DEVICE_ID_TTI_HPT302	0x0006
-#define PCI_DEVICE_ID_TTI_HPT371	0x0007
-#define PCI_DEVICE_ID_TTI_HPT374	0x0008
-#define PCI_DEVICE_ID_TTI_HPT372N	0x0009	/* apparently a 372N variant? */
-
-#define PCI_VENDOR_ID_VIA		0x1106
-#define PCI_DEVICE_ID_VIA_8763_0	0x0198
-#define PCI_DEVICE_ID_VIA_8380_0	0x0204
-#define PCI_DEVICE_ID_VIA_3238_0	0x0238
-#define PCI_DEVICE_ID_VIA_PT880		0x0258
-#define PCI_DEVICE_ID_VIA_PT880ULTRA	0x0308
-#define PCI_DEVICE_ID_VIA_PX8X0_0	0x0259
-#define PCI_DEVICE_ID_VIA_3269_0	0x0269
-#define PCI_DEVICE_ID_VIA_K8T800PRO_0	0x0282
-#define PCI_DEVICE_ID_VIA_3296_0	0x0296
-#define PCI_DEVICE_ID_VIA_8363_0	0x0305
-#define PCI_DEVICE_ID_VIA_P4M800CE	0x0314
-#define PCI_DEVICE_ID_VIA_P4M890	0x0327
-#define PCI_DEVICE_ID_VIA_VT3324	0x0324
-#define PCI_DEVICE_ID_VIA_VT3336	0x0336
-#define PCI_DEVICE_ID_VIA_VT3351	0x0351
-#define PCI_DEVICE_ID_VIA_VT3364	0x0364
-#define PCI_DEVICE_ID_VIA_8371_0	0x0391
-#define PCI_DEVICE_ID_VIA_6415		0x0415
-#define PCI_DEVICE_ID_VIA_8501_0	0x0501
-#define PCI_DEVICE_ID_VIA_82C561	0x0561
-#define PCI_DEVICE_ID_VIA_82C586_1	0x0571
-#define PCI_DEVICE_ID_VIA_82C576	0x0576
-#define PCI_DEVICE_ID_VIA_82C586_0	0x0586
-#define PCI_DEVICE_ID_VIA_82C596	0x0596
-#define PCI_DEVICE_ID_VIA_82C597_0	0x0597
-#define PCI_DEVICE_ID_VIA_82C598_0	0x0598
-#define PCI_DEVICE_ID_VIA_8601_0	0x0601
-#define PCI_DEVICE_ID_VIA_8605_0	0x0605
-#define PCI_DEVICE_ID_VIA_82C686	0x0686
-#define PCI_DEVICE_ID_VIA_82C691_0	0x0691
-#define PCI_DEVICE_ID_VIA_82C576_1	0x1571
-#define PCI_DEVICE_ID_VIA_82C586_2	0x3038
-#define PCI_DEVICE_ID_VIA_82C586_3	0x3040
-#define PCI_DEVICE_ID_VIA_82C596_3	0x3050
-#define PCI_DEVICE_ID_VIA_82C596B_3	0x3051
-#define PCI_DEVICE_ID_VIA_82C686_4	0x3057
-#define PCI_DEVICE_ID_VIA_82C686_5	0x3058
-#define PCI_DEVICE_ID_VIA_8233_5	0x3059
-#define PCI_DEVICE_ID_VIA_8233_0	0x3074
-#define PCI_DEVICE_ID_VIA_8633_0	0x3091
-#define PCI_DEVICE_ID_VIA_8367_0	0x3099
-#define PCI_DEVICE_ID_VIA_8653_0	0x3101
-#define PCI_DEVICE_ID_VIA_8622		0x3102
-#define PCI_DEVICE_ID_VIA_8235_USB_2	0x3104
-#define PCI_DEVICE_ID_VIA_8233C_0	0x3109
-#define PCI_DEVICE_ID_VIA_8361		0x3112
-#define PCI_DEVICE_ID_VIA_XM266		0x3116
-#define PCI_DEVICE_ID_VIA_612X		0x3119
-#define PCI_DEVICE_ID_VIA_862X_0	0x3123
-#define PCI_DEVICE_ID_VIA_8753_0	0x3128
-#define PCI_DEVICE_ID_VIA_8233A		0x3147
-#define PCI_DEVICE_ID_VIA_8703_51_0	0x3148
-#define PCI_DEVICE_ID_VIA_8237_SATA	0x3149
-#define PCI_DEVICE_ID_VIA_XN266		0x3156
-#define PCI_DEVICE_ID_VIA_6410		0x3164
-#define PCI_DEVICE_ID_VIA_8754C_0	0x3168
-#define PCI_DEVICE_ID_VIA_8235		0x3177
-#define PCI_DEVICE_ID_VIA_8385_0	0x3188
-#define PCI_DEVICE_ID_VIA_8377_0	0x3189
-#define PCI_DEVICE_ID_VIA_8378_0	0x3205
-#define PCI_DEVICE_ID_VIA_8783_0	0x3208
-#define PCI_DEVICE_ID_VIA_8237		0x3227
-#define PCI_DEVICE_ID_VIA_8251		0x3287
-#define PCI_DEVICE_ID_VIA_8261		0x3402
-#define PCI_DEVICE_ID_VIA_8237A		0x3337
-#define PCI_DEVICE_ID_VIA_8237S		0x3372
-#define PCI_DEVICE_ID_VIA_SATA_EIDE	0x5324
-#define PCI_DEVICE_ID_VIA_8231		0x8231
-#define PCI_DEVICE_ID_VIA_8231_4	0x8235
-#define PCI_DEVICE_ID_VIA_8365_1	0x8305
-#define PCI_DEVICE_ID_VIA_CX700		0x8324
-#define PCI_DEVICE_ID_VIA_CX700_IDE	0x0581
-#define PCI_DEVICE_ID_VIA_VX800		0x8353
-#define PCI_DEVICE_ID_VIA_VX855		0x8409
-#define PCI_DEVICE_ID_VIA_8371_1	0x8391
-#define PCI_DEVICE_ID_VIA_82C598_1	0x8598
-#define PCI_DEVICE_ID_VIA_838X_1	0xB188
-#define PCI_DEVICE_ID_VIA_83_87XX_1	0xB198
-#define PCI_DEVICE_ID_VIA_VX855_IDE	0xC409
-#define PCI_DEVICE_ID_VIA_ANON		0xFFFF
-
-#define PCI_VENDOR_ID_SIEMENS           0x110A
-#define PCI_DEVICE_ID_SIEMENS_DSCC4     0x2102
-
-#define PCI_VENDOR_ID_VORTEX		0x1119
-#define PCI_DEVICE_ID_VORTEX_GDT60x0	0x0000
-#define PCI_DEVICE_ID_VORTEX_GDT6000B	0x0001
-#define PCI_DEVICE_ID_VORTEX_GDT6x10	0x0002
-#define PCI_DEVICE_ID_VORTEX_GDT6x20	0x0003
-#define PCI_DEVICE_ID_VORTEX_GDT6530	0x0004
-#define PCI_DEVICE_ID_VORTEX_GDT6550	0x0005
-#define PCI_DEVICE_ID_VORTEX_GDT6x17	0x0006
-#define PCI_DEVICE_ID_VORTEX_GDT6x27	0x0007
-#define PCI_DEVICE_ID_VORTEX_GDT6537	0x0008
-#define PCI_DEVICE_ID_VORTEX_GDT6557	0x0009
-#define PCI_DEVICE_ID_VORTEX_GDT6x15	0x000a
-#define PCI_DEVICE_ID_VORTEX_GDT6x25	0x000b
-#define PCI_DEVICE_ID_VORTEX_GDT6535	0x000c
-#define PCI_DEVICE_ID_VORTEX_GDT6555	0x000d
-#define PCI_DEVICE_ID_VORTEX_GDT6x17RP	0x0100
-#define PCI_DEVICE_ID_VORTEX_GDT6x27RP	0x0101
-#define PCI_DEVICE_ID_VORTEX_GDT6537RP	0x0102
-#define PCI_DEVICE_ID_VORTEX_GDT6557RP	0x0103
-#define PCI_DEVICE_ID_VORTEX_GDT6x11RP	0x0104
-#define PCI_DEVICE_ID_VORTEX_GDT6x21RP	0x0105
-
-#define PCI_VENDOR_ID_EF		0x111a
-#define PCI_DEVICE_ID_EF_ATM_FPGA	0x0000
-#define PCI_DEVICE_ID_EF_ATM_ASIC	0x0002
-#define PCI_DEVICE_ID_EF_ATM_LANAI2	0x0003
-#define PCI_DEVICE_ID_EF_ATM_LANAIHB	0x0005
-
-#define PCI_VENDOR_ID_IDT		0x111d
-#define PCI_DEVICE_ID_IDT_IDT77201	0x0001
-
-#define PCI_VENDOR_ID_FORE		0x1127
-#define PCI_DEVICE_ID_FORE_PCA200E	0x0300
-
-#define PCI_VENDOR_ID_PHILIPS		0x1131
-#define PCI_DEVICE_ID_PHILIPS_SAA7146	0x7146
-#define PCI_DEVICE_ID_PHILIPS_SAA9730	0x9730
-
-#define PCI_VENDOR_ID_EICON		0x1133
-#define PCI_DEVICE_ID_EICON_DIVA20	0xe002
-#define PCI_DEVICE_ID_EICON_DIVA20_U	0xe004
-#define PCI_DEVICE_ID_EICON_DIVA201	0xe005
-#define PCI_DEVICE_ID_EICON_DIVA202	0xe00b
-#define PCI_DEVICE_ID_EICON_MAESTRA	0xe010
-#define PCI_DEVICE_ID_EICON_MAESTRAQ	0xe012
-#define PCI_DEVICE_ID_EICON_MAESTRAQ_U	0xe013
-#define PCI_DEVICE_ID_EICON_MAESTRAP	0xe014
-
-#define PCI_VENDOR_ID_CISCO		0x1137
-
-#define PCI_VENDOR_ID_ZIATECH		0x1138
-#define PCI_DEVICE_ID_ZIATECH_5550_HC	0x5550
-
-
-#define PCI_VENDOR_ID_SYSKONNECT	0x1148
-#define PCI_DEVICE_ID_SYSKONNECT_TR	0x4200
-#define PCI_DEVICE_ID_SYSKONNECT_GE	0x4300
-#define PCI_DEVICE_ID_SYSKONNECT_YU	0x4320
-#define PCI_DEVICE_ID_SYSKONNECT_9DXX	0x4400
-#define PCI_DEVICE_ID_SYSKONNECT_9MXX	0x4500
-
-#define PCI_VENDOR_ID_DIGI		0x114f
-#define PCI_DEVICE_ID_DIGI_DF_M_IOM2_E	0x0070
-#define PCI_DEVICE_ID_DIGI_DF_M_E	0x0071
-#define PCI_DEVICE_ID_DIGI_DF_M_IOM2_A	0x0072
-#define PCI_DEVICE_ID_DIGI_DF_M_A	0x0073
-#define PCI_DEVICE_ID_DIGI_NEO_8	0x00B1
-#define PCI_DEVICE_ID_NEO_2DB9          0x00C8
-#define PCI_DEVICE_ID_NEO_2DB9PRI       0x00C9
-#define PCI_DEVICE_ID_NEO_2RJ45         0x00CA
-#define PCI_DEVICE_ID_NEO_2RJ45PRI      0x00CB
-#define PCIE_DEVICE_ID_NEO_4_IBM        0x00F4
-
-#define PCI_VENDOR_ID_XIRCOM		0x115d
-#define PCI_DEVICE_ID_XIRCOM_RBM56G	0x0101
-#define PCI_DEVICE_ID_XIRCOM_X3201_MDM	0x0103
-
-#define PCI_VENDOR_ID_SERVERWORKS	  0x1166
-#define PCI_DEVICE_ID_SERVERWORKS_HE	  0x0008
-#define PCI_DEVICE_ID_SERVERWORKS_LE	  0x0009
-#define PCI_DEVICE_ID_SERVERWORKS_GCNB_LE 0x0017
-#define PCI_DEVICE_ID_SERVERWORKS_HT1000_PXB	0x0036
-#define PCI_DEVICE_ID_SERVERWORKS_EPB	  0x0103
-#define PCI_DEVICE_ID_SERVERWORKS_HT2000_PCIE	0x0132
-#define PCI_DEVICE_ID_SERVERWORKS_OSB4	  0x0200
-#define PCI_DEVICE_ID_SERVERWORKS_CSB5	  0x0201
-#define PCI_DEVICE_ID_SERVERWORKS_CSB6    0x0203
-#define PCI_DEVICE_ID_SERVERWORKS_HT1000SB 0x0205
-#define PCI_DEVICE_ID_SERVERWORKS_OSB4IDE 0x0211
-#define PCI_DEVICE_ID_SERVERWORKS_CSB5IDE 0x0212
-#define PCI_DEVICE_ID_SERVERWORKS_CSB6IDE 0x0213
-#define PCI_DEVICE_ID_SERVERWORKS_HT1000IDE 0x0214
-#define PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2 0x0217
-#define PCI_DEVICE_ID_SERVERWORKS_CSB6LPC 0x0227
-#define PCI_DEVICE_ID_SERVERWORKS_HT1100LD 0x0408
-
-#define PCI_VENDOR_ID_SBE		0x1176
-#define PCI_DEVICE_ID_SBE_WANXL100	0x0301
-#define PCI_DEVICE_ID_SBE_WANXL200	0x0302
-#define PCI_DEVICE_ID_SBE_WANXL400	0x0104
-#define PCI_SUBDEVICE_ID_SBE_T3E3	0x0009
-#define PCI_SUBDEVICE_ID_SBE_2T3E3_P0	0x0901
-#define PCI_SUBDEVICE_ID_SBE_2T3E3_P1	0x0902
-
-#define PCI_VENDOR_ID_TOSHIBA		0x1179
-#define PCI_DEVICE_ID_TOSHIBA_PICCOLO_1	0x0101
-#define PCI_DEVICE_ID_TOSHIBA_PICCOLO_2	0x0102
-#define PCI_DEVICE_ID_TOSHIBA_PICCOLO_3	0x0103
-#define PCI_DEVICE_ID_TOSHIBA_PICCOLO_5	0x0105
-#define PCI_DEVICE_ID_TOSHIBA_TOPIC95	0x060a
-#define PCI_DEVICE_ID_TOSHIBA_TOPIC97	0x060f
-#define PCI_DEVICE_ID_TOSHIBA_TOPIC100	0x0617
-
-#define PCI_VENDOR_ID_TOSHIBA_2		0x102f
-#define PCI_DEVICE_ID_TOSHIBA_TC35815CF	0x0030
-#define PCI_DEVICE_ID_TOSHIBA_TC35815_NWU	0x0031
-#define PCI_DEVICE_ID_TOSHIBA_TC35815_TX4939	0x0032
-#define PCI_DEVICE_ID_TOSHIBA_TC86C001_IDE	0x0105
-#define PCI_DEVICE_ID_TOSHIBA_TC86C001_MISC	0x0108
-#define PCI_DEVICE_ID_TOSHIBA_SPIDER_NET 0x01b3
-
-#define PCI_VENDOR_ID_ATTO		0x117c
-
-#define PCI_VENDOR_ID_RICOH		0x1180
-#define PCI_DEVICE_ID_RICOH_RL5C465	0x0465
-#define PCI_DEVICE_ID_RICOH_RL5C466	0x0466
-#define PCI_DEVICE_ID_RICOH_RL5C475	0x0475
-#define PCI_DEVICE_ID_RICOH_RL5C476	0x0476
-#define PCI_DEVICE_ID_RICOH_RL5C478	0x0478
-#define PCI_DEVICE_ID_RICOH_R5C822	0x0822
-#define PCI_DEVICE_ID_RICOH_R5CE823	0xe823
-#define PCI_DEVICE_ID_RICOH_R5C832	0x0832
-#define PCI_DEVICE_ID_RICOH_R5C843	0x0843
-
-#define PCI_VENDOR_ID_DLINK		0x1186
-#define PCI_DEVICE_ID_DLINK_DGE510T	0x4c00
-
-#define PCI_VENDOR_ID_ARTOP		0x1191
-#define PCI_DEVICE_ID_ARTOP_ATP850UF	0x0005
-#define PCI_DEVICE_ID_ARTOP_ATP860	0x0006
-#define PCI_DEVICE_ID_ARTOP_ATP860R	0x0007
-#define PCI_DEVICE_ID_ARTOP_ATP865	0x0008
-#define PCI_DEVICE_ID_ARTOP_ATP865R	0x0009
-#define PCI_DEVICE_ID_ARTOP_ATP867A	0x000A
-#define PCI_DEVICE_ID_ARTOP_ATP867B	0x000B
-#define PCI_DEVICE_ID_ARTOP_AEC7610	0x8002
-#define PCI_DEVICE_ID_ARTOP_AEC7612UW	0x8010
-#define PCI_DEVICE_ID_ARTOP_AEC7612U	0x8020
-#define PCI_DEVICE_ID_ARTOP_AEC7612S	0x8030
-#define PCI_DEVICE_ID_ARTOP_AEC7612D	0x8040
-#define PCI_DEVICE_ID_ARTOP_AEC7612SUW	0x8050
-#define PCI_DEVICE_ID_ARTOP_8060	0x8060
-
-#define PCI_VENDOR_ID_ZEITNET		0x1193
-#define PCI_DEVICE_ID_ZEITNET_1221	0x0001
-#define PCI_DEVICE_ID_ZEITNET_1225	0x0002
-
-#define PCI_VENDOR_ID_FUJITSU_ME	0x119e
-#define PCI_DEVICE_ID_FUJITSU_FS155	0x0001
-#define PCI_DEVICE_ID_FUJITSU_FS50	0x0003
-
-#define PCI_SUBVENDOR_ID_KEYSPAN	0x11a9
-#define PCI_SUBDEVICE_ID_KEYSPAN_SX2	0x5334
-
-#define PCI_VENDOR_ID_MARVELL		0x11ab
-#define PCI_DEVICE_ID_MARVELL_GT64111	0x4146
-#define PCI_DEVICE_ID_MARVELL_GT64260	0x6430
-#define PCI_DEVICE_ID_MARVELL_MV64360	0x6460
-#define PCI_DEVICE_ID_MARVELL_MV64460	0x6480
-#define PCI_DEVICE_ID_MARVELL_88ALP01_NAND	0x4100
-#define PCI_DEVICE_ID_MARVELL_88ALP01_SD	0x4101
-#define PCI_DEVICE_ID_MARVELL_88ALP01_CCIC	0x4102
-
-#define PCI_VENDOR_ID_V3		0x11b0
-#define PCI_DEVICE_ID_V3_V960		0x0001
-#define PCI_DEVICE_ID_V3_V351		0x0002
-
-#define PCI_VENDOR_ID_ATT		0x11c1
-#define PCI_DEVICE_ID_ATT_VENUS_MODEM	0x480
-
-#define PCI_VENDOR_ID_SPECIALIX		0x11cb
-#define PCI_DEVICE_ID_SPECIALIX_IO8	0x2000
-#define PCI_DEVICE_ID_SPECIALIX_RIO	0x8000
-#define PCI_SUBDEVICE_ID_SPECIALIX_SPEED4 0xa004
-
-#define PCI_VENDOR_ID_ANALOG_DEVICES	0x11d4
-#define PCI_DEVICE_ID_AD1889JS		0x1889
-
-#define PCI_DEVICE_ID_SEGA_BBA		0x1234
-
-#define PCI_VENDOR_ID_ZORAN		0x11de
-#define PCI_DEVICE_ID_ZORAN_36057	0x6057
-#define PCI_DEVICE_ID_ZORAN_36120	0x6120
-
-#define PCI_VENDOR_ID_COMPEX		0x11f6
-#define PCI_DEVICE_ID_COMPEX_ENET100VG4	0x0112
-
-#define PCI_VENDOR_ID_PMC_Sierra	0x11f8
-
-#define PCI_VENDOR_ID_RP		0x11fe
-#define PCI_DEVICE_ID_RP32INTF		0x0001
-#define PCI_DEVICE_ID_RP8INTF		0x0002
-#define PCI_DEVICE_ID_RP16INTF		0x0003
-#define PCI_DEVICE_ID_RP4QUAD		0x0004
-#define PCI_DEVICE_ID_RP8OCTA		0x0005
-#define PCI_DEVICE_ID_RP8J		0x0006
-#define PCI_DEVICE_ID_RP4J		0x0007
-#define PCI_DEVICE_ID_RP8SNI		0x0008
-#define PCI_DEVICE_ID_RP16SNI		0x0009
-#define PCI_DEVICE_ID_RPP4		0x000A
-#define PCI_DEVICE_ID_RPP8		0x000B
-#define PCI_DEVICE_ID_RP4M		0x000D
-#define PCI_DEVICE_ID_RP2_232		0x000E
-#define PCI_DEVICE_ID_RP2_422		0x000F
-#define PCI_DEVICE_ID_URP32INTF		0x0801
-#define PCI_DEVICE_ID_URP8INTF		0x0802
-#define PCI_DEVICE_ID_URP16INTF		0x0803
-#define PCI_DEVICE_ID_URP8OCTA		0x0805
-#define PCI_DEVICE_ID_UPCI_RM3_8PORT	0x080C
-#define PCI_DEVICE_ID_UPCI_RM3_4PORT	0x080D
-#define PCI_DEVICE_ID_CRP16INTF		0x0903
-
-#define PCI_VENDOR_ID_CYCLADES		0x120e
-#define PCI_DEVICE_ID_CYCLOM_Y_Lo	0x0100
-#define PCI_DEVICE_ID_CYCLOM_Y_Hi	0x0101
-#define PCI_DEVICE_ID_CYCLOM_4Y_Lo	0x0102
-#define PCI_DEVICE_ID_CYCLOM_4Y_Hi	0x0103
-#define PCI_DEVICE_ID_CYCLOM_8Y_Lo	0x0104
-#define PCI_DEVICE_ID_CYCLOM_8Y_Hi	0x0105
-#define PCI_DEVICE_ID_CYCLOM_Z_Lo	0x0200
-#define PCI_DEVICE_ID_CYCLOM_Z_Hi	0x0201
-#define PCI_DEVICE_ID_PC300_RX_2	0x0300
-#define PCI_DEVICE_ID_PC300_RX_1	0x0301
-#define PCI_DEVICE_ID_PC300_TE_2	0x0310
-#define PCI_DEVICE_ID_PC300_TE_1	0x0311
-#define PCI_DEVICE_ID_PC300_TE_M_2	0x0320
-#define PCI_DEVICE_ID_PC300_TE_M_1	0x0321
-
-#define PCI_VENDOR_ID_ESSENTIAL		0x120f
-#define PCI_DEVICE_ID_ESSENTIAL_ROADRUNNER	0x0001
-
-#define PCI_VENDOR_ID_O2		0x1217
-#define PCI_DEVICE_ID_O2_6729		0x6729
-#define PCI_DEVICE_ID_O2_6730		0x673a
-#define PCI_DEVICE_ID_O2_6832		0x6832
-#define PCI_DEVICE_ID_O2_6836		0x6836
-#define PCI_DEVICE_ID_O2_6812		0x6872
-#define PCI_DEVICE_ID_O2_6933		0x6933
-#define PCI_DEVICE_ID_O2_8120		0x8120
-#define PCI_DEVICE_ID_O2_8220		0x8220
-#define PCI_DEVICE_ID_O2_8221		0x8221
-#define PCI_DEVICE_ID_O2_8320		0x8320
-#define PCI_DEVICE_ID_O2_8321		0x8321
-
-#define PCI_VENDOR_ID_3DFX		0x121a
-#define PCI_DEVICE_ID_3DFX_VOODOO	0x0001
-#define PCI_DEVICE_ID_3DFX_VOODOO2	0x0002
-#define PCI_DEVICE_ID_3DFX_BANSHEE	0x0003
-#define PCI_DEVICE_ID_3DFX_VOODOO3	0x0005
-#define PCI_DEVICE_ID_3DFX_VOODOO5	0x0009
-
-#define PCI_VENDOR_ID_AVM		0x1244
-#define PCI_DEVICE_ID_AVM_B1		0x0700
-#define PCI_DEVICE_ID_AVM_C4		0x0800
-#define PCI_DEVICE_ID_AVM_A1		0x0a00
-#define PCI_DEVICE_ID_AVM_A1_V2		0x0e00
-#define PCI_DEVICE_ID_AVM_C2		0x1100
-#define PCI_DEVICE_ID_AVM_T1		0x1200
-
-#define PCI_VENDOR_ID_STALLION		0x124d
-
-/* Allied Telesyn */
-#define PCI_VENDOR_ID_AT    		0x1259
-#define PCI_SUBDEVICE_ID_AT_2700FX	0x2701
-#define PCI_SUBDEVICE_ID_AT_2701FX	0x2703
-
-#define PCI_VENDOR_ID_ESS		0x125d
-#define PCI_DEVICE_ID_ESS_ESS1968	0x1968
-#define PCI_DEVICE_ID_ESS_ESS1978	0x1978
-#define PCI_DEVICE_ID_ESS_ALLEGRO_1	0x1988
-#define PCI_DEVICE_ID_ESS_ALLEGRO	0x1989
-#define PCI_DEVICE_ID_ESS_CANYON3D_2LE	0x1990
-#define PCI_DEVICE_ID_ESS_CANYON3D_2	0x1992
-#define PCI_DEVICE_ID_ESS_MAESTRO3	0x1998
-#define PCI_DEVICE_ID_ESS_MAESTRO3_1	0x1999
-#define PCI_DEVICE_ID_ESS_MAESTRO3_HW	0x199a
-#define PCI_DEVICE_ID_ESS_MAESTRO3_2	0x199b
-
-#define PCI_VENDOR_ID_SATSAGEM		0x1267
-#define PCI_DEVICE_ID_SATSAGEM_NICCY	0x1016
-
-#define PCI_VENDOR_ID_ENSONIQ		0x1274
-#define PCI_DEVICE_ID_ENSONIQ_CT5880	0x5880
-#define PCI_DEVICE_ID_ENSONIQ_ES1370	0x5000
-#define PCI_DEVICE_ID_ENSONIQ_ES1371	0x1371
-
-#define PCI_VENDOR_ID_TRANSMETA		0x1279
-#define PCI_DEVICE_ID_EFFICEON		0x0060
-
-#define PCI_VENDOR_ID_ROCKWELL		0x127A
-
-#define PCI_VENDOR_ID_ITE		0x1283
-#define PCI_DEVICE_ID_ITE_8172		0x8172
-#define PCI_DEVICE_ID_ITE_8211		0x8211
-#define PCI_DEVICE_ID_ITE_8212		0x8212
-#define PCI_DEVICE_ID_ITE_8213		0x8213
-#define PCI_DEVICE_ID_ITE_8152		0x8152
-#define PCI_DEVICE_ID_ITE_8872		0x8872
-#define PCI_DEVICE_ID_ITE_IT8330G_0	0xe886
-
-/* formerly Platform Tech */
-#define PCI_DEVICE_ID_ESS_ESS0100	0x0100
-
-#define PCI_VENDOR_ID_ALTEON		0x12ae
-
-#define PCI_SUBVENDOR_ID_CONNECT_TECH			0x12c4
-#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_232		0x0001
-#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_232		0x0002
-#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_232		0x0003
-#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_485		0x0004
-#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_485_4_4	0x0005
-#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_485		0x0006
-#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_485_2_2	0x0007
-#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_485		0x0008
-#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_485_2_6	0x0009
-#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH081101V1	0x000A
-#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH041101V1	0x000B
-#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_20MHZ		0x000C
-#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_PTM		0x000D
-#define PCI_SUBDEVICE_ID_CONNECT_TECH_NT960PCI		0x0100
-#define PCI_SUBDEVICE_ID_CONNECT_TECH_TITAN_2		0x0201
-#define PCI_SUBDEVICE_ID_CONNECT_TECH_TITAN_4		0x0202
-#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_2_232	0x0300
-#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_4_232	0x0301
-#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_8_232	0x0302
-#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_1_1	0x0310
-#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_2_2	0x0311
-#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_4_4	0x0312
-#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_2	0x0320
-#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_4	0x0321
-#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_8	0x0322
-#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_2_485	0x0330
-#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_4_485	0x0331
-#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_8_485	0x0332
-
-#define PCI_VENDOR_ID_NVIDIA_SGS	0x12d2
-#define PCI_DEVICE_ID_NVIDIA_SGS_RIVA128 0x0018
-
-#define PCI_SUBVENDOR_ID_CHASE_PCIFAST		0x12E0
-#define PCI_SUBDEVICE_ID_CHASE_PCIFAST4		0x0031
-#define PCI_SUBDEVICE_ID_CHASE_PCIFAST8		0x0021
-#define PCI_SUBDEVICE_ID_CHASE_PCIFAST16	0x0011
-#define PCI_SUBDEVICE_ID_CHASE_PCIFAST16FMC	0x0041
-#define PCI_SUBVENDOR_ID_CHASE_PCIRAS		0x124D
-#define PCI_SUBDEVICE_ID_CHASE_PCIRAS4		0xF001
-#define PCI_SUBDEVICE_ID_CHASE_PCIRAS8		0xF010
-
-#define PCI_VENDOR_ID_AUREAL		0x12eb
-#define PCI_DEVICE_ID_AUREAL_VORTEX_1	0x0001
-#define PCI_DEVICE_ID_AUREAL_VORTEX_2	0x0002
-#define PCI_DEVICE_ID_AUREAL_ADVANTAGE	0x0003
-
-#define PCI_VENDOR_ID_ELECTRONICDESIGNGMBH 0x12f8
-#define PCI_DEVICE_ID_LML_33R10		0x8a02
-
-#define PCI_VENDOR_ID_ESDGMBH		0x12fe
-#define PCI_DEVICE_ID_ESDGMBH_CPCIASIO4 0x0111
-
-#define PCI_VENDOR_ID_SIIG		0x131f
-#define PCI_SUBVENDOR_ID_SIIG		0x131f
-#define PCI_DEVICE_ID_SIIG_1S_10x_550	0x1000
-#define PCI_DEVICE_ID_SIIG_1S_10x_650	0x1001
-#define PCI_DEVICE_ID_SIIG_1S_10x_850	0x1002
-#define PCI_DEVICE_ID_SIIG_1S1P_10x_550	0x1010
-#define PCI_DEVICE_ID_SIIG_1S1P_10x_650	0x1011
-#define PCI_DEVICE_ID_SIIG_1S1P_10x_850	0x1012
-#define PCI_DEVICE_ID_SIIG_1P_10x	0x1020
-#define PCI_DEVICE_ID_SIIG_2P_10x	0x1021
-#define PCI_DEVICE_ID_SIIG_2S_10x_550	0x1030
-#define PCI_DEVICE_ID_SIIG_2S_10x_650	0x1031
-#define PCI_DEVICE_ID_SIIG_2S_10x_850	0x1032
-#define PCI_DEVICE_ID_SIIG_2S1P_10x_550	0x1034
-#define PCI_DEVICE_ID_SIIG_2S1P_10x_650	0x1035
-#define PCI_DEVICE_ID_SIIG_2S1P_10x_850	0x1036
-#define PCI_DEVICE_ID_SIIG_4S_10x_550	0x1050
-#define PCI_DEVICE_ID_SIIG_4S_10x_650	0x1051
-#define PCI_DEVICE_ID_SIIG_4S_10x_850	0x1052
-#define PCI_DEVICE_ID_SIIG_1S_20x_550	0x2000
-#define PCI_DEVICE_ID_SIIG_1S_20x_650	0x2001
-#define PCI_DEVICE_ID_SIIG_1S_20x_850	0x2002
-#define PCI_DEVICE_ID_SIIG_1P_20x	0x2020
-#define PCI_DEVICE_ID_SIIG_2P_20x	0x2021
-#define PCI_DEVICE_ID_SIIG_2S_20x_550	0x2030
-#define PCI_DEVICE_ID_SIIG_2S_20x_650	0x2031
-#define PCI_DEVICE_ID_SIIG_2S_20x_850	0x2032
-#define PCI_DEVICE_ID_SIIG_2P1S_20x_550	0x2040
-#define PCI_DEVICE_ID_SIIG_2P1S_20x_650	0x2041
-#define PCI_DEVICE_ID_SIIG_2P1S_20x_850	0x2042
-#define PCI_DEVICE_ID_SIIG_1S1P_20x_550	0x2010
-#define PCI_DEVICE_ID_SIIG_1S1P_20x_650	0x2011
-#define PCI_DEVICE_ID_SIIG_1S1P_20x_850	0x2012
-#define PCI_DEVICE_ID_SIIG_4S_20x_550	0x2050
-#define PCI_DEVICE_ID_SIIG_4S_20x_650	0x2051
-#define PCI_DEVICE_ID_SIIG_4S_20x_850	0x2052
-#define PCI_DEVICE_ID_SIIG_2S1P_20x_550	0x2060
-#define PCI_DEVICE_ID_SIIG_2S1P_20x_650	0x2061
-#define PCI_DEVICE_ID_SIIG_2S1P_20x_850	0x2062
-#define PCI_DEVICE_ID_SIIG_8S_20x_550	0x2080
-#define PCI_DEVICE_ID_SIIG_8S_20x_650	0x2081
-#define PCI_DEVICE_ID_SIIG_8S_20x_850	0x2082
-#define PCI_SUBDEVICE_ID_SIIG_QUARTET_SERIAL	0x2050
-#define PCI_SUBDEVICE_ID_SIIG_DUAL_SERIAL	0x2530
-
-#define PCI_VENDOR_ID_RADISYS		0x1331
-
-#define PCI_VENDOR_ID_MICRO_MEMORY		0x1332
-#define PCI_DEVICE_ID_MICRO_MEMORY_5415CN	0x5415
-#define PCI_DEVICE_ID_MICRO_MEMORY_5425CN	0x5425
-#define PCI_DEVICE_ID_MICRO_MEMORY_6155		0x6155
-
-#define PCI_VENDOR_ID_DOMEX		0x134a
-#define PCI_DEVICE_ID_DOMEX_DMX3191D	0x0001
-
-#define PCI_VENDOR_ID_INTASHIELD	0x135a
-#define PCI_DEVICE_ID_INTASHIELD_IS200	0x0d80
-#define PCI_DEVICE_ID_INTASHIELD_IS400	0x0dc0
-
-#define PCI_VENDOR_ID_QUATECH		0x135C
-#define PCI_DEVICE_ID_QUATECH_QSC100	0x0010
-#define PCI_DEVICE_ID_QUATECH_DSC100	0x0020
-#define PCI_DEVICE_ID_QUATECH_ESC100D	0x0050
-#define PCI_DEVICE_ID_QUATECH_ESC100M	0x0060
-#define PCI_DEVICE_ID_QUATECH_SPPXP_100 0x0278
-
-#define PCI_VENDOR_ID_SEALEVEL		0x135e
-#define PCI_DEVICE_ID_SEALEVEL_U530	0x7101
-#define PCI_DEVICE_ID_SEALEVEL_UCOMM2	0x7201
-#define PCI_DEVICE_ID_SEALEVEL_UCOMM422	0x7402
-#define PCI_DEVICE_ID_SEALEVEL_UCOMM232	0x7202
-#define PCI_DEVICE_ID_SEALEVEL_COMM4	0x7401
-#define PCI_DEVICE_ID_SEALEVEL_COMM8	0x7801
-#define PCI_DEVICE_ID_SEALEVEL_7803	0x7803
-#define PCI_DEVICE_ID_SEALEVEL_UCOMM8	0x7804
-
-#define PCI_VENDOR_ID_HYPERCOPE		0x1365
-#define PCI_DEVICE_ID_HYPERCOPE_PLX	0x9050
-#define PCI_SUBDEVICE_ID_HYPERCOPE_OLD_ERGO	0x0104
-#define PCI_SUBDEVICE_ID_HYPERCOPE_ERGO		0x0106
-#define PCI_SUBDEVICE_ID_HYPERCOPE_METRO	0x0107
-#define PCI_SUBDEVICE_ID_HYPERCOPE_CHAMP2	0x0108
-
-#define PCI_VENDOR_ID_DIGIGRAM		0x1369
-#define PCI_SUBDEVICE_ID_DIGIGRAM_LX6464ES_SERIAL_SUBSYSTEM	0xc001
-#define PCI_SUBDEVICE_ID_DIGIGRAM_LX6464ES_CAE_SERIAL_SUBSYSTEM	0xc002
-
-#define PCI_VENDOR_ID_KAWASAKI		0x136b
-#define PCI_DEVICE_ID_MCHIP_KL5A72002	0xff01
-
-#define PCI_VENDOR_ID_CNET		0x1371
-#define PCI_DEVICE_ID_CNET_GIGACARD	0x434e
-
-#define PCI_VENDOR_ID_LMC		0x1376
-#define PCI_DEVICE_ID_LMC_HSSI		0x0003
-#define PCI_DEVICE_ID_LMC_DS3		0x0004
-#define PCI_DEVICE_ID_LMC_SSI		0x0005
-#define PCI_DEVICE_ID_LMC_T1		0x0006
-
-#define PCI_VENDOR_ID_NETGEAR		0x1385
-#define PCI_DEVICE_ID_NETGEAR_GA620	0x620a
-
-#define PCI_VENDOR_ID_APPLICOM		0x1389
-#define PCI_DEVICE_ID_APPLICOM_PCIGENERIC 0x0001
-#define PCI_DEVICE_ID_APPLICOM_PCI2000IBS_CAN 0x0002
-#define PCI_DEVICE_ID_APPLICOM_PCI2000PFB 0x0003
-
-#define PCI_VENDOR_ID_MOXA		0x1393
-#define PCI_DEVICE_ID_MOXA_RC7000	0x0001
-#define PCI_DEVICE_ID_MOXA_CP102	0x1020
-#define PCI_DEVICE_ID_MOXA_CP102UL	0x1021
-#define PCI_DEVICE_ID_MOXA_CP102U	0x1022
-#define PCI_DEVICE_ID_MOXA_C104		0x1040
-#define PCI_DEVICE_ID_MOXA_CP104U	0x1041
-#define PCI_DEVICE_ID_MOXA_CP104JU	0x1042
-#define PCI_DEVICE_ID_MOXA_CP104EL	0x1043
-#define PCI_DEVICE_ID_MOXA_CT114	0x1140
-#define PCI_DEVICE_ID_MOXA_CP114	0x1141
-#define PCI_DEVICE_ID_MOXA_CP118U	0x1180
-#define PCI_DEVICE_ID_MOXA_CP118EL	0x1181
-#define PCI_DEVICE_ID_MOXA_CP132	0x1320
-#define PCI_DEVICE_ID_MOXA_CP132U	0x1321
-#define PCI_DEVICE_ID_MOXA_CP134U	0x1340
-#define PCI_DEVICE_ID_MOXA_C168		0x1680
-#define PCI_DEVICE_ID_MOXA_CP168U	0x1681
-#define PCI_DEVICE_ID_MOXA_CP168EL	0x1682
-#define PCI_DEVICE_ID_MOXA_CP204J	0x2040
-#define PCI_DEVICE_ID_MOXA_C218		0x2180
-#define PCI_DEVICE_ID_MOXA_C320		0x3200
-
-#define PCI_VENDOR_ID_CCD		0x1397
-#define PCI_DEVICE_ID_CCD_HFC4S		0x08B4
-#define PCI_SUBDEVICE_ID_CCD_PMX2S	0x1234
-#define PCI_DEVICE_ID_CCD_HFC8S		0x16B8
-#define PCI_DEVICE_ID_CCD_2BD0		0x2bd0
-#define PCI_DEVICE_ID_CCD_HFCE1		0x30B1
-#define PCI_SUBDEVICE_ID_CCD_SPD4S	0x3136
-#define PCI_SUBDEVICE_ID_CCD_SPDE1	0x3137
-#define PCI_DEVICE_ID_CCD_B000		0xb000
-#define PCI_DEVICE_ID_CCD_B006		0xb006
-#define PCI_DEVICE_ID_CCD_B007		0xb007
-#define PCI_DEVICE_ID_CCD_B008		0xb008
-#define PCI_DEVICE_ID_CCD_B009		0xb009
-#define PCI_DEVICE_ID_CCD_B00A		0xb00a
-#define PCI_DEVICE_ID_CCD_B00B		0xb00b
-#define PCI_DEVICE_ID_CCD_B00C		0xb00c
-#define PCI_DEVICE_ID_CCD_B100		0xb100
-#define PCI_SUBDEVICE_ID_CCD_IOB4ST	0xB520
-#define PCI_SUBDEVICE_ID_CCD_IOB8STR	0xB521
-#define PCI_SUBDEVICE_ID_CCD_IOB8ST	0xB522
-#define PCI_SUBDEVICE_ID_CCD_IOB1E1	0xB523
-#define PCI_SUBDEVICE_ID_CCD_SWYX4S	0xB540
-#define PCI_SUBDEVICE_ID_CCD_JH4S20	0xB550
-#define PCI_SUBDEVICE_ID_CCD_IOB8ST_1	0xB552
-#define PCI_SUBDEVICE_ID_CCD_JHSE1	0xB553
-#define PCI_SUBDEVICE_ID_CCD_JH8S	0xB55B
-#define PCI_SUBDEVICE_ID_CCD_BN4S	0xB560
-#define PCI_SUBDEVICE_ID_CCD_BN8S	0xB562
-#define PCI_SUBDEVICE_ID_CCD_BNE1	0xB563
-#define PCI_SUBDEVICE_ID_CCD_BNE1D	0xB564
-#define PCI_SUBDEVICE_ID_CCD_BNE1DP	0xB565
-#define PCI_SUBDEVICE_ID_CCD_BN2S	0xB566
-#define PCI_SUBDEVICE_ID_CCD_BN1SM	0xB567
-#define PCI_SUBDEVICE_ID_CCD_BN4SM	0xB568
-#define PCI_SUBDEVICE_ID_CCD_BN2SM	0xB569
-#define PCI_SUBDEVICE_ID_CCD_BNE1M	0xB56A
-#define PCI_SUBDEVICE_ID_CCD_BN8SP	0xB56B
-#define PCI_SUBDEVICE_ID_CCD_HFC4S	0xB620
-#define PCI_SUBDEVICE_ID_CCD_HFC8S	0xB622
-#define PCI_DEVICE_ID_CCD_B700		0xb700
-#define PCI_DEVICE_ID_CCD_B701		0xb701
-#define PCI_SUBDEVICE_ID_CCD_HFCE1	0xC523
-#define PCI_SUBDEVICE_ID_CCD_OV2S	0xE884
-#define PCI_SUBDEVICE_ID_CCD_OV4S	0xE888
-#define PCI_SUBDEVICE_ID_CCD_OV8S	0xE998
-
-#define PCI_VENDOR_ID_EXAR		0x13a8
-#define PCI_DEVICE_ID_EXAR_XR17C152	0x0152
-#define PCI_DEVICE_ID_EXAR_XR17C154	0x0154
-#define PCI_DEVICE_ID_EXAR_XR17C158	0x0158
-
-#define PCI_VENDOR_ID_MICROGATE		0x13c0
-#define PCI_DEVICE_ID_MICROGATE_USC	0x0010
-#define PCI_DEVICE_ID_MICROGATE_SCA	0x0030
-
-#define PCI_VENDOR_ID_3WARE		0x13C1
-#define PCI_DEVICE_ID_3WARE_1000	0x1000
-#define PCI_DEVICE_ID_3WARE_7000	0x1001
-#define PCI_DEVICE_ID_3WARE_9000	0x1002
-
-#define PCI_VENDOR_ID_IOMEGA		0x13ca
-#define PCI_DEVICE_ID_IOMEGA_BUZ	0x4231
-
-#define PCI_VENDOR_ID_ABOCOM		0x13D1
-#define PCI_DEVICE_ID_ABOCOM_2BD1       0x2BD1
-
-#define PCI_VENDOR_ID_SUNDANCE		0x13f0
-
-#define PCI_VENDOR_ID_CMEDIA		0x13f6
-#define PCI_DEVICE_ID_CMEDIA_CM8338A	0x0100
-#define PCI_DEVICE_ID_CMEDIA_CM8338B	0x0101
-#define PCI_DEVICE_ID_CMEDIA_CM8738	0x0111
-#define PCI_DEVICE_ID_CMEDIA_CM8738B	0x0112
-
-#define PCI_VENDOR_ID_LAVA		0x1407
-#define PCI_DEVICE_ID_LAVA_DSERIAL	0x0100 /* 2x 16550 */
-#define PCI_DEVICE_ID_LAVA_QUATRO_A	0x0101 /* 2x 16550, half of 4 port */
-#define PCI_DEVICE_ID_LAVA_QUATRO_B	0x0102 /* 2x 16550, half of 4 port */
-#define PCI_DEVICE_ID_LAVA_QUATTRO_A	0x0120 /* 2x 16550A, half of 4 port */
-#define PCI_DEVICE_ID_LAVA_QUATTRO_B	0x0121 /* 2x 16550A, half of 4 port */
-#define PCI_DEVICE_ID_LAVA_OCTO_A	0x0180 /* 4x 16550A, half of 8 port */
-#define PCI_DEVICE_ID_LAVA_OCTO_B	0x0181 /* 4x 16550A, half of 8 port */
-#define PCI_DEVICE_ID_LAVA_PORT_PLUS	0x0200 /* 2x 16650 */
-#define PCI_DEVICE_ID_LAVA_QUAD_A	0x0201 /* 2x 16650, half of 4 port */
-#define PCI_DEVICE_ID_LAVA_QUAD_B	0x0202 /* 2x 16650, half of 4 port */
-#define PCI_DEVICE_ID_LAVA_SSERIAL	0x0500 /* 1x 16550 */
-#define PCI_DEVICE_ID_LAVA_PORT_650	0x0600 /* 1x 16650 */
-#define PCI_DEVICE_ID_LAVA_PARALLEL	0x8000
-#define PCI_DEVICE_ID_LAVA_DUAL_PAR_A	0x8002 /* The Lava Dual Parallel is */
-#define PCI_DEVICE_ID_LAVA_DUAL_PAR_B	0x8003 /* two PCI devices on a card */
-#define PCI_DEVICE_ID_LAVA_BOCA_IOPPAR	0x8800
-
-#define PCI_VENDOR_ID_TIMEDIA		0x1409
-#define PCI_DEVICE_ID_TIMEDIA_1889	0x7168
-
-#define PCI_VENDOR_ID_ICE		0x1412
-#define PCI_DEVICE_ID_ICE_1712		0x1712
-#define PCI_DEVICE_ID_VT1724		0x1724
-
-#define PCI_VENDOR_ID_OXSEMI		0x1415
-#define PCI_DEVICE_ID_OXSEMI_12PCI840	0x8403
-#define PCI_DEVICE_ID_OXSEMI_PCIe840		0xC000
-#define PCI_DEVICE_ID_OXSEMI_PCIe840_G		0xC004
-#define PCI_DEVICE_ID_OXSEMI_PCIe952_0		0xC100
-#define PCI_DEVICE_ID_OXSEMI_PCIe952_0_G	0xC104
-#define PCI_DEVICE_ID_OXSEMI_PCIe952_1		0xC110
-#define PCI_DEVICE_ID_OXSEMI_PCIe952_1_G	0xC114
-#define PCI_DEVICE_ID_OXSEMI_PCIe952_1_U	0xC118
-#define PCI_DEVICE_ID_OXSEMI_PCIe952_1_GU	0xC11C
-#define PCI_DEVICE_ID_OXSEMI_16PCI954	0x9501
-#define PCI_DEVICE_ID_OXSEMI_C950	0x950B
-#define PCI_DEVICE_ID_OXSEMI_16PCI95N	0x9511
-#define PCI_DEVICE_ID_OXSEMI_16PCI954PP	0x9513
-#define PCI_DEVICE_ID_OXSEMI_16PCI952	0x9521
-#define PCI_DEVICE_ID_OXSEMI_16PCI952PP	0x9523
-#define PCI_SUBDEVICE_ID_OXSEMI_C950	0x0001
-
-#define PCI_VENDOR_ID_CHELSIO		0x1425
-
-#define PCI_VENDOR_ID_SAMSUNG		0x144d
-
-#define PCI_VENDOR_ID_GIGABYTE		0x1458
-
-#define PCI_VENDOR_ID_AMBIT		0x1468
-
-#define PCI_VENDOR_ID_MYRICOM		0x14c1
-
-#define PCI_VENDOR_ID_TITAN		0x14D2
-#define PCI_DEVICE_ID_TITAN_010L	0x8001
-#define PCI_DEVICE_ID_TITAN_100L	0x8010
-#define PCI_DEVICE_ID_TITAN_110L	0x8011
-#define PCI_DEVICE_ID_TITAN_200L	0x8020
-#define PCI_DEVICE_ID_TITAN_210L	0x8021
-#define PCI_DEVICE_ID_TITAN_400L	0x8040
-#define PCI_DEVICE_ID_TITAN_800L	0x8080
-#define PCI_DEVICE_ID_TITAN_100		0xA001
-#define PCI_DEVICE_ID_TITAN_200		0xA005
-#define PCI_DEVICE_ID_TITAN_400		0xA003
-#define PCI_DEVICE_ID_TITAN_800B	0xA004
-
-#define PCI_VENDOR_ID_PANACOM		0x14d4
-#define PCI_DEVICE_ID_PANACOM_QUADMODEM	0x0400
-#define PCI_DEVICE_ID_PANACOM_DUALMODEM	0x0402
-
-#define PCI_VENDOR_ID_SIPACKETS		0x14d9
-#define PCI_DEVICE_ID_SP1011		0x0010
-
-#define PCI_VENDOR_ID_AFAVLAB		0x14db
-#define PCI_DEVICE_ID_AFAVLAB_P028	0x2180
-#define PCI_DEVICE_ID_AFAVLAB_P030	0x2182
-#define PCI_SUBDEVICE_ID_AFAVLAB_P061		0x2150
-
-#define PCI_VENDOR_ID_BCM_GVC          0x14a4
-#define PCI_VENDOR_ID_BROADCOM		0x14e4
-#define PCI_DEVICE_ID_TIGON3_5752	0x1600
-#define PCI_DEVICE_ID_TIGON3_5752M	0x1601
-#define PCI_DEVICE_ID_NX2_5709		0x1639
-#define PCI_DEVICE_ID_NX2_5709S		0x163a
-#define PCI_DEVICE_ID_TIGON3_5700	0x1644
-#define PCI_DEVICE_ID_TIGON3_5701	0x1645
-#define PCI_DEVICE_ID_TIGON3_5702	0x1646
-#define PCI_DEVICE_ID_TIGON3_5703	0x1647
-#define PCI_DEVICE_ID_TIGON3_5704	0x1648
-#define PCI_DEVICE_ID_TIGON3_5704S_2	0x1649
-#define PCI_DEVICE_ID_NX2_5706		0x164a
-#define PCI_DEVICE_ID_NX2_5708		0x164c
-#define PCI_DEVICE_ID_TIGON3_5702FE	0x164d
-#define PCI_DEVICE_ID_NX2_57710		0x164e
-#define PCI_DEVICE_ID_NX2_57711		0x164f
-#define PCI_DEVICE_ID_NX2_57711E	0x1650
-#define PCI_DEVICE_ID_TIGON3_5705	0x1653
-#define PCI_DEVICE_ID_TIGON3_5705_2	0x1654
-#define PCI_DEVICE_ID_TIGON3_5719	0x1657
-#define PCI_DEVICE_ID_TIGON3_5721	0x1659
-#define PCI_DEVICE_ID_TIGON3_5722	0x165a
-#define PCI_DEVICE_ID_TIGON3_5723	0x165b
-#define PCI_DEVICE_ID_TIGON3_5705M	0x165d
-#define PCI_DEVICE_ID_TIGON3_5705M_2	0x165e
-#define PCI_DEVICE_ID_NX2_57712		0x1662
-#define PCI_DEVICE_ID_NX2_57712E	0x1663
-#define PCI_DEVICE_ID_TIGON3_5714	0x1668
-#define PCI_DEVICE_ID_TIGON3_5714S	0x1669
-#define PCI_DEVICE_ID_TIGON3_5780	0x166a
-#define PCI_DEVICE_ID_TIGON3_5780S	0x166b
-#define PCI_DEVICE_ID_TIGON3_5705F	0x166e
-#define PCI_DEVICE_ID_TIGON3_5754M	0x1672
-#define PCI_DEVICE_ID_TIGON3_5755M	0x1673
-#define PCI_DEVICE_ID_TIGON3_5756	0x1674
-#define PCI_DEVICE_ID_TIGON3_5751	0x1677
-#define PCI_DEVICE_ID_TIGON3_5715	0x1678
-#define PCI_DEVICE_ID_TIGON3_5715S	0x1679
-#define PCI_DEVICE_ID_TIGON3_5754	0x167a
-#define PCI_DEVICE_ID_TIGON3_5755	0x167b
-#define PCI_DEVICE_ID_TIGON3_5751M	0x167d
-#define PCI_DEVICE_ID_TIGON3_5751F	0x167e
-#define PCI_DEVICE_ID_TIGON3_5787F	0x167f
-#define PCI_DEVICE_ID_TIGON3_5761E	0x1680
-#define PCI_DEVICE_ID_TIGON3_5761	0x1681
-#define PCI_DEVICE_ID_TIGON3_5764	0x1684
-#define PCI_DEVICE_ID_NX2_57800		0x168a
-#define PCI_DEVICE_ID_NX2_57840		0x168d
-#define PCI_DEVICE_ID_NX2_57810		0x168e
-#define PCI_DEVICE_ID_TIGON3_5787M	0x1693
-#define PCI_DEVICE_ID_TIGON3_5782	0x1696
-#define PCI_DEVICE_ID_TIGON3_5784	0x1698
-#define PCI_DEVICE_ID_TIGON3_5786	0x169a
-#define PCI_DEVICE_ID_TIGON3_5787	0x169b
-#define PCI_DEVICE_ID_TIGON3_5788	0x169c
-#define PCI_DEVICE_ID_TIGON3_5789	0x169d
-#define PCI_DEVICE_ID_NX2_57800_MF	0x16a5
-#define PCI_DEVICE_ID_TIGON3_5702X	0x16a6
-#define PCI_DEVICE_ID_TIGON3_5703X	0x16a7
-#define PCI_DEVICE_ID_TIGON3_5704S	0x16a8
-#define PCI_DEVICE_ID_NX2_57800_VF	0x16a9
-#define PCI_DEVICE_ID_NX2_5706S		0x16aa
-#define PCI_DEVICE_ID_NX2_57840_MF	0x16ab
-#define PCI_DEVICE_ID_NX2_5708S		0x16ac
-#define PCI_DEVICE_ID_NX2_57840_VF	0x16ad
-#define PCI_DEVICE_ID_NX2_57810_MF	0x16ae
-#define PCI_DEVICE_ID_NX2_57810_VF	0x16af
-#define PCI_DEVICE_ID_TIGON3_5702A3	0x16c6
-#define PCI_DEVICE_ID_TIGON3_5703A3	0x16c7
-#define PCI_DEVICE_ID_TIGON3_5781	0x16dd
-#define PCI_DEVICE_ID_TIGON3_5753	0x16f7
-#define PCI_DEVICE_ID_TIGON3_5753M	0x16fd
-#define PCI_DEVICE_ID_TIGON3_5753F	0x16fe
-#define PCI_DEVICE_ID_TIGON3_5901	0x170d
-#define PCI_DEVICE_ID_BCM4401B1		0x170c
-#define PCI_DEVICE_ID_TIGON3_5901_2	0x170e
-#define PCI_DEVICE_ID_TIGON3_5906	0x1712
-#define PCI_DEVICE_ID_TIGON3_5906M	0x1713
-#define PCI_DEVICE_ID_BCM4401		0x4401
-#define PCI_DEVICE_ID_BCM4401B0		0x4402
-
-#define PCI_VENDOR_ID_TOPIC		0x151f
-#define PCI_DEVICE_ID_TOPIC_TP560	0x0000
-
-#define PCI_VENDOR_ID_MAINPINE		0x1522
-#define PCI_DEVICE_ID_MAINPINE_PBRIDGE	0x0100
-#define PCI_VENDOR_ID_ENE		0x1524
-#define PCI_DEVICE_ID_ENE_CB710_FLASH	0x0510
-#define PCI_DEVICE_ID_ENE_CB712_SD	0x0550
-#define PCI_DEVICE_ID_ENE_CB712_SD_2	0x0551
-#define PCI_DEVICE_ID_ENE_CB714_SD	0x0750
-#define PCI_DEVICE_ID_ENE_CB714_SD_2	0x0751
-#define PCI_DEVICE_ID_ENE_1211		0x1211
-#define PCI_DEVICE_ID_ENE_1225		0x1225
-#define PCI_DEVICE_ID_ENE_1410		0x1410
-#define PCI_DEVICE_ID_ENE_710		0x1411
-#define PCI_DEVICE_ID_ENE_712		0x1412
-#define PCI_DEVICE_ID_ENE_1420		0x1420
-#define PCI_DEVICE_ID_ENE_720		0x1421
-#define PCI_DEVICE_ID_ENE_722		0x1422
-
-#define PCI_SUBVENDOR_ID_PERLE          0x155f
-#define PCI_SUBDEVICE_ID_PCI_RAS4       0xf001
-#define PCI_SUBDEVICE_ID_PCI_RAS8       0xf010
-
-#define PCI_VENDOR_ID_SYBA		0x1592
-#define PCI_DEVICE_ID_SYBA_2P_EPP	0x0782
-#define PCI_DEVICE_ID_SYBA_1P_ECP	0x0783
-
-#define PCI_VENDOR_ID_MORETON		0x15aa
-#define PCI_DEVICE_ID_RASTEL_2PORT	0x2000
-
-#define PCI_VENDOR_ID_ZOLTRIX		0x15b0
-#define PCI_DEVICE_ID_ZOLTRIX_2BD0	0x2bd0
-
-#define PCI_VENDOR_ID_MELLANOX		0x15b3
-#define PCI_DEVICE_ID_MELLANOX_TAVOR	0x5a44
-#define PCI_DEVICE_ID_MELLANOX_TAVOR_BRIDGE	0x5a46
-#define PCI_DEVICE_ID_MELLANOX_ARBEL_COMPAT 0x6278
-#define PCI_DEVICE_ID_MELLANOX_ARBEL	0x6282
-#define PCI_DEVICE_ID_MELLANOX_SINAI_OLD 0x5e8c
-#define PCI_DEVICE_ID_MELLANOX_SINAI	0x6274
-
-#define PCI_VENDOR_ID_DFI		0x15bd
-
-#define PCI_VENDOR_ID_QUICKNET		0x15e2
-#define PCI_DEVICE_ID_QUICKNET_XJ	0x0500
-
-/*
- * ADDI-DATA GmbH communication cards <info@addi-data.com>
- */
-#define PCI_VENDOR_ID_ADDIDATA_OLD             0x10E8
-#define PCI_VENDOR_ID_ADDIDATA                 0x15B8
-#define PCI_DEVICE_ID_ADDIDATA_APCI7500        0x7000
-#define PCI_DEVICE_ID_ADDIDATA_APCI7420        0x7001
-#define PCI_DEVICE_ID_ADDIDATA_APCI7300        0x7002
-#define PCI_DEVICE_ID_ADDIDATA_APCI7800        0x818E
-#define PCI_DEVICE_ID_ADDIDATA_APCI7500_2      0x7009
-#define PCI_DEVICE_ID_ADDIDATA_APCI7420_2      0x700A
-#define PCI_DEVICE_ID_ADDIDATA_APCI7300_2      0x700B
-#define PCI_DEVICE_ID_ADDIDATA_APCI7500_3      0x700C
-#define PCI_DEVICE_ID_ADDIDATA_APCI7420_3      0x700D
-#define PCI_DEVICE_ID_ADDIDATA_APCI7300_3      0x700E
-#define PCI_DEVICE_ID_ADDIDATA_APCI7800_3      0x700F
-#define PCI_DEVICE_ID_ADDIDATA_APCIe7300       0x7010
-#define PCI_DEVICE_ID_ADDIDATA_APCIe7420       0x7011
-#define PCI_DEVICE_ID_ADDIDATA_APCIe7500       0x7012
-#define PCI_DEVICE_ID_ADDIDATA_APCIe7800       0x7013
-
-#define PCI_VENDOR_ID_PDC		0x15e9
-
-#define PCI_VENDOR_ID_FARSITE           0x1619
-#define PCI_DEVICE_ID_FARSITE_T2P       0x0400
-#define PCI_DEVICE_ID_FARSITE_T4P       0x0440
-#define PCI_DEVICE_ID_FARSITE_T1U       0x0610
-#define PCI_DEVICE_ID_FARSITE_T2U       0x0620
-#define PCI_DEVICE_ID_FARSITE_T4U       0x0640
-#define PCI_DEVICE_ID_FARSITE_TE1       0x1610
-#define PCI_DEVICE_ID_FARSITE_TE1C      0x1612
-
-#define PCI_VENDOR_ID_ARIMA		0x161f
-
-#define PCI_VENDOR_ID_BROCADE		0x1657
-#define PCI_DEVICE_ID_BROCADE_CT	0x0014
-#define PCI_DEVICE_ID_BROCADE_FC_8G1P	0x0017
-#define PCI_DEVICE_ID_BROCADE_CT_FC	0x0021
-
-#define PCI_VENDOR_ID_SIBYTE		0x166d
-#define PCI_DEVICE_ID_BCM1250_PCI	0x0001
-#define PCI_DEVICE_ID_BCM1250_HT	0x0002
-
-#define PCI_VENDOR_ID_ATHEROS		0x168c
-
-#define PCI_VENDOR_ID_NETCELL		0x169c
-#define PCI_DEVICE_ID_REVOLUTION	0x0044
-
-#define PCI_VENDOR_ID_CENATEK		0x16CA
-#define PCI_DEVICE_ID_CENATEK_IDE	0x0001
-
-#define PCI_VENDOR_ID_VITESSE		0x1725
-#define PCI_DEVICE_ID_VITESSE_VSC7174	0x7174
-
-#define PCI_VENDOR_ID_LINKSYS		0x1737
-#define PCI_DEVICE_ID_LINKSYS_EG1064	0x1064
-
-#define PCI_VENDOR_ID_ALTIMA		0x173b
-#define PCI_DEVICE_ID_ALTIMA_AC1000	0x03e8
-#define PCI_DEVICE_ID_ALTIMA_AC1001	0x03e9
-#define PCI_DEVICE_ID_ALTIMA_AC9100	0x03ea
-#define PCI_DEVICE_ID_ALTIMA_AC1003	0x03eb
-
-#define PCI_VENDOR_ID_BELKIN		0x1799
-#define PCI_DEVICE_ID_BELKIN_F5D7010V7	0x701f
-
-#define PCI_VENDOR_ID_RDC		0x17f3
-#define PCI_DEVICE_ID_RDC_R6020		0x6020
-#define PCI_DEVICE_ID_RDC_R6030		0x6030
-#define PCI_DEVICE_ID_RDC_R6040		0x6040
-#define PCI_DEVICE_ID_RDC_R6060		0x6060
-#define PCI_DEVICE_ID_RDC_R6061		0x6061
-#define PCI_DEVICE_ID_RDC_D1010		0x1010
-
-#define PCI_VENDOR_ID_LENOVO		0x17aa
-
-#define PCI_VENDOR_ID_ARECA		0x17d3
-#define PCI_DEVICE_ID_ARECA_1110	0x1110
-#define PCI_DEVICE_ID_ARECA_1120	0x1120
-#define PCI_DEVICE_ID_ARECA_1130	0x1130
-#define PCI_DEVICE_ID_ARECA_1160	0x1160
-#define PCI_DEVICE_ID_ARECA_1170	0x1170
-#define PCI_DEVICE_ID_ARECA_1200	0x1200
-#define PCI_DEVICE_ID_ARECA_1201	0x1201
-#define PCI_DEVICE_ID_ARECA_1202	0x1202
-#define PCI_DEVICE_ID_ARECA_1210	0x1210
-#define PCI_DEVICE_ID_ARECA_1220	0x1220
-#define PCI_DEVICE_ID_ARECA_1230	0x1230
-#define PCI_DEVICE_ID_ARECA_1260	0x1260
-#define PCI_DEVICE_ID_ARECA_1270	0x1270
-#define PCI_DEVICE_ID_ARECA_1280	0x1280
-#define PCI_DEVICE_ID_ARECA_1380	0x1380
-#define PCI_DEVICE_ID_ARECA_1381	0x1381
-#define PCI_DEVICE_ID_ARECA_1680	0x1680
-#define PCI_DEVICE_ID_ARECA_1681	0x1681
-
-#define PCI_VENDOR_ID_S2IO		0x17d5
-#define	PCI_DEVICE_ID_S2IO_WIN		0x5731
-#define	PCI_DEVICE_ID_S2IO_UNI		0x5831
-#define PCI_DEVICE_ID_HERC_WIN		0x5732
-#define PCI_DEVICE_ID_HERC_UNI		0x5832
-
-#define PCI_VENDOR_ID_SITECOM		0x182d
-#define PCI_DEVICE_ID_SITECOM_DC105V2	0x3069
-
-#define PCI_VENDOR_ID_TOPSPIN		0x1867
-
-#define PCI_VENDOR_ID_SILAN		0x1904
-
-#define PCI_VENDOR_ID_RENESAS		0x1912
-#define PCI_DEVICE_ID_RENESAS_SH7781	0x0001
-#define PCI_DEVICE_ID_RENESAS_SH7780	0x0002
-#define PCI_DEVICE_ID_RENESAS_SH7763	0x0004
-#define PCI_DEVICE_ID_RENESAS_SH7785	0x0007
-#define PCI_DEVICE_ID_RENESAS_SH7786	0x0010
-
-#define PCI_VENDOR_ID_SOLARFLARE	0x1924
-#define PCI_DEVICE_ID_SOLARFLARE_SFC4000A_0	0x0703
-#define PCI_DEVICE_ID_SOLARFLARE_SFC4000A_1	0x6703
-#define PCI_DEVICE_ID_SOLARFLARE_SFC4000B	0x0710
-
-#define PCI_VENDOR_ID_TDI               0x192E
-#define PCI_DEVICE_ID_TDI_EHCI          0x0101
-
-#define PCI_VENDOR_ID_FREESCALE		0x1957
-#define PCI_DEVICE_ID_MPC8308		0xc006
-#define PCI_DEVICE_ID_MPC8315E		0x00b4
-#define PCI_DEVICE_ID_MPC8315		0x00b5
-#define PCI_DEVICE_ID_MPC8314E		0x00b6
-#define PCI_DEVICE_ID_MPC8314		0x00b7
-#define PCI_DEVICE_ID_MPC8378E		0x00c4
-#define PCI_DEVICE_ID_MPC8378		0x00c5
-#define PCI_DEVICE_ID_MPC8377E		0x00c6
-#define PCI_DEVICE_ID_MPC8377		0x00c7
-#define PCI_DEVICE_ID_MPC8548E		0x0012
-#define PCI_DEVICE_ID_MPC8548		0x0013
-#define PCI_DEVICE_ID_MPC8543E		0x0014
-#define PCI_DEVICE_ID_MPC8543		0x0015
-#define PCI_DEVICE_ID_MPC8547E		0x0018
-#define PCI_DEVICE_ID_MPC8545E		0x0019
-#define PCI_DEVICE_ID_MPC8545		0x001a
-#define PCI_DEVICE_ID_MPC8569E		0x0061
-#define PCI_DEVICE_ID_MPC8569		0x0060
-#define PCI_DEVICE_ID_MPC8568E		0x0020
-#define PCI_DEVICE_ID_MPC8568		0x0021
-#define PCI_DEVICE_ID_MPC8567E		0x0022
-#define PCI_DEVICE_ID_MPC8567		0x0023
-#define PCI_DEVICE_ID_MPC8533E		0x0030
-#define PCI_DEVICE_ID_MPC8533		0x0031
-#define PCI_DEVICE_ID_MPC8544E		0x0032
-#define PCI_DEVICE_ID_MPC8544		0x0033
-#define PCI_DEVICE_ID_MPC8572E		0x0040
-#define PCI_DEVICE_ID_MPC8572		0x0041
-#define PCI_DEVICE_ID_MPC8536E		0x0050
-#define PCI_DEVICE_ID_MPC8536		0x0051
-#define PCI_DEVICE_ID_P2020E		0x0070
-#define PCI_DEVICE_ID_P2020		0x0071
-#define PCI_DEVICE_ID_P2010E		0x0078
-#define PCI_DEVICE_ID_P2010		0x0079
-#define PCI_DEVICE_ID_P1020E		0x0100
-#define PCI_DEVICE_ID_P1020		0x0101
-#define PCI_DEVICE_ID_P1021E		0x0102
-#define PCI_DEVICE_ID_P1021		0x0103
-#define PCI_DEVICE_ID_P1011E		0x0108
-#define PCI_DEVICE_ID_P1011		0x0109
-#define PCI_DEVICE_ID_P1022E		0x0110
-#define PCI_DEVICE_ID_P1022		0x0111
-#define PCI_DEVICE_ID_P1013E		0x0118
-#define PCI_DEVICE_ID_P1013		0x0119
-#define PCI_DEVICE_ID_P4080E		0x0400
-#define PCI_DEVICE_ID_P4080		0x0401
-#define PCI_DEVICE_ID_P4040E		0x0408
-#define PCI_DEVICE_ID_P4040		0x0409
-#define PCI_DEVICE_ID_P2040E		0x0410
-#define PCI_DEVICE_ID_P2040		0x0411
-#define PCI_DEVICE_ID_P3041E		0x041E
-#define PCI_DEVICE_ID_P3041		0x041F
-#define PCI_DEVICE_ID_P5020E		0x0420
-#define PCI_DEVICE_ID_P5020		0x0421
-#define PCI_DEVICE_ID_P5010E		0x0428
-#define PCI_DEVICE_ID_P5010		0x0429
-#define PCI_DEVICE_ID_MPC8641		0x7010
-#define PCI_DEVICE_ID_MPC8641D		0x7011
-#define PCI_DEVICE_ID_MPC8610		0x7018
-
-#define PCI_VENDOR_ID_PASEMI		0x1959
-
-#define PCI_VENDOR_ID_ATTANSIC		0x1969
-#define PCI_DEVICE_ID_ATTANSIC_L1	0x1048
-#define PCI_DEVICE_ID_ATTANSIC_L2	0x2048
-
-#define PCI_VENDOR_ID_JMICRON		0x197B
-#define PCI_DEVICE_ID_JMICRON_JMB360	0x2360
-#define PCI_DEVICE_ID_JMICRON_JMB361	0x2361
-#define PCI_DEVICE_ID_JMICRON_JMB362	0x2362
-#define PCI_DEVICE_ID_JMICRON_JMB363	0x2363
-#define PCI_DEVICE_ID_JMICRON_JMB364	0x2364
-#define PCI_DEVICE_ID_JMICRON_JMB365	0x2365
-#define PCI_DEVICE_ID_JMICRON_JMB366	0x2366
-#define PCI_DEVICE_ID_JMICRON_JMB368	0x2368
-#define PCI_DEVICE_ID_JMICRON_JMB369	0x2369
-#define PCI_DEVICE_ID_JMICRON_JMB38X_SD	0x2381
-#define PCI_DEVICE_ID_JMICRON_JMB38X_MMC 0x2382
-#define PCI_DEVICE_ID_JMICRON_JMB38X_MS	0x2383
-#define PCI_DEVICE_ID_JMICRON_JMB385_MS	0x2388
-#define PCI_DEVICE_ID_JMICRON_JMB388_SD	0x2391
-#define PCI_DEVICE_ID_JMICRON_JMB388_ESD 0x2392
-#define PCI_DEVICE_ID_JMICRON_JMB390_MS	0x2393
-
-#define PCI_VENDOR_ID_KORENIX		0x1982
-#define PCI_DEVICE_ID_KORENIX_JETCARDF0	0x1600
-#define PCI_DEVICE_ID_KORENIX_JETCARDF1	0x16ff
-#define PCI_DEVICE_ID_KORENIX_JETCARDF2	0x1700
-#define PCI_DEVICE_ID_KORENIX_JETCARDF3	0x17ff
-
-#define PCI_VENDOR_ID_QMI		0x1a32
-
-#define PCI_VENDOR_ID_AZWAVE		0x1a3b
-
-#define PCI_VENDOR_ID_ASMEDIA		0x1b21
-
-#define PCI_VENDOR_ID_TEKRAM		0x1de1
-#define PCI_DEVICE_ID_TEKRAM_DC290	0xdc29
-
-#define PCI_VENDOR_ID_TEHUTI		0x1fc9
-#define PCI_DEVICE_ID_TEHUTI_3009	0x3009
-#define PCI_DEVICE_ID_TEHUTI_3010	0x3010
-#define PCI_DEVICE_ID_TEHUTI_3014	0x3014
-
-#define PCI_VENDOR_ID_HINT             0x3388
-#define PCI_DEVICE_ID_HINT_VXPROII_IDE 0x8013
-
-#define PCI_VENDOR_ID_3DLABS		0x3d3d
-#define PCI_DEVICE_ID_3DLABS_PERMEDIA2	0x0007
-#define PCI_DEVICE_ID_3DLABS_PERMEDIA2V	0x0009
-
-#define PCI_VENDOR_ID_NETXEN		0x4040
-#define PCI_DEVICE_ID_NX2031_10GXSR	0x0001
-#define PCI_DEVICE_ID_NX2031_10GCX4	0x0002
-#define PCI_DEVICE_ID_NX2031_4GCU	0x0003
-#define PCI_DEVICE_ID_NX2031_IMEZ	0x0004
-#define PCI_DEVICE_ID_NX2031_HMEZ	0x0005
-#define PCI_DEVICE_ID_NX2031_XG_MGMT	0x0024
-#define PCI_DEVICE_ID_NX2031_XG_MGMT2	0x0025
-#define PCI_DEVICE_ID_NX3031		0x0100
-
-#define PCI_VENDOR_ID_AKS		0x416c
-#define PCI_DEVICE_ID_AKS_ALADDINCARD	0x0100
-
-#define PCI_VENDOR_ID_ACCESSIO		0x494f
-#define PCI_DEVICE_ID_ACCESSIO_WDG_CSM	0x22c0
-
-#define PCI_VENDOR_ID_S3		0x5333
-#define PCI_DEVICE_ID_S3_TRIO		0x8811
-#define PCI_DEVICE_ID_S3_868		0x8880
-#define PCI_DEVICE_ID_S3_968		0x88f0
-#define PCI_DEVICE_ID_S3_SAVAGE4	0x8a25
-#define PCI_DEVICE_ID_S3_PROSAVAGE8	0x8d04
-#define PCI_DEVICE_ID_S3_SONICVIBES	0xca00
-
-#define PCI_VENDOR_ID_DUNORD		0x5544
-#define PCI_DEVICE_ID_DUNORD_I3000	0x0001
-
-#define PCI_VENDOR_ID_DCI		0x6666
-#define PCI_DEVICE_ID_DCI_PCCOM4	0x0001
-#define PCI_DEVICE_ID_DCI_PCCOM8	0x0002
-#define PCI_DEVICE_ID_DCI_PCCOM2	0x0004
-
-#define PCI_VENDOR_ID_INTEL		0x8086
-#define PCI_DEVICE_ID_INTEL_EESSC	0x0008
-#define PCI_DEVICE_ID_INTEL_PXHD_0	0x0320
-#define PCI_DEVICE_ID_INTEL_PXHD_1	0x0321
-#define PCI_DEVICE_ID_INTEL_PXH_0	0x0329
-#define PCI_DEVICE_ID_INTEL_PXH_1	0x032A
-#define PCI_DEVICE_ID_INTEL_PXHV	0x032C
-#define PCI_DEVICE_ID_INTEL_80332_0	0x0330
-#define PCI_DEVICE_ID_INTEL_80332_1	0x0332
-#define PCI_DEVICE_ID_INTEL_80333_0	0x0370
-#define PCI_DEVICE_ID_INTEL_80333_1	0x0372
-#define PCI_DEVICE_ID_INTEL_82375	0x0482
-#define PCI_DEVICE_ID_INTEL_82424	0x0483
-#define PCI_DEVICE_ID_INTEL_82378	0x0484
-#define PCI_DEVICE_ID_INTEL_MRST_SD0	0x0807
-#define PCI_DEVICE_ID_INTEL_MRST_SD1	0x0808
-#define PCI_DEVICE_ID_INTEL_MFD_SD	0x0820
-#define PCI_DEVICE_ID_INTEL_MFD_SDIO1	0x0821
-#define PCI_DEVICE_ID_INTEL_MFD_SDIO2	0x0822
-#define PCI_DEVICE_ID_INTEL_MFD_EMMC0	0x0823
-#define PCI_DEVICE_ID_INTEL_MFD_EMMC1	0x0824
-#define PCI_DEVICE_ID_INTEL_MRST_SD2	0x084F
-#define PCI_DEVICE_ID_INTEL_I960	0x0960
-#define PCI_DEVICE_ID_INTEL_I960RM	0x0962
-#define PCI_DEVICE_ID_INTEL_8257X_SOL	0x1062
-#define PCI_DEVICE_ID_INTEL_82573E_SOL	0x1085
-#define PCI_DEVICE_ID_INTEL_82573L_SOL	0x108F
-#define PCI_DEVICE_ID_INTEL_82815_MC	0x1130
-#define PCI_DEVICE_ID_INTEL_82815_CGC	0x1132
-#define PCI_DEVICE_ID_INTEL_82092AA_0	0x1221
-#define PCI_DEVICE_ID_INTEL_7505_0	0x2550
-#define PCI_DEVICE_ID_INTEL_7205_0	0x255d
-#define PCI_DEVICE_ID_INTEL_82437	0x122d
-#define PCI_DEVICE_ID_INTEL_82371FB_0	0x122e
-#define PCI_DEVICE_ID_INTEL_82371FB_1	0x1230
-#define PCI_DEVICE_ID_INTEL_82371MX	0x1234
-#define PCI_DEVICE_ID_INTEL_82441	0x1237
-#define PCI_DEVICE_ID_INTEL_82380FB	0x124b
-#define PCI_DEVICE_ID_INTEL_82439	0x1250
-#define PCI_DEVICE_ID_INTEL_80960_RP	0x1960
-#define PCI_DEVICE_ID_INTEL_82840_HB	0x1a21
-#define PCI_DEVICE_ID_INTEL_82845_HB	0x1a30
-#define PCI_DEVICE_ID_INTEL_IOAT	0x1a38
-#define PCI_DEVICE_ID_INTEL_COUGARPOINT_LPC_MIN	0x1c41
-#define PCI_DEVICE_ID_INTEL_COUGARPOINT_LPC_MAX	0x1c5f
-#define PCI_DEVICE_ID_INTEL_PATSBURG_LPC_0	0x1d40
-#define PCI_DEVICE_ID_INTEL_PATSBURG_LPC_1	0x1d41
-#define PCI_DEVICE_ID_INTEL_PANTHERPOINT_XHCI	0x1e31
-#define PCI_DEVICE_ID_INTEL_PANTHERPOINT_LPC_MIN	0x1e40
-#define PCI_DEVICE_ID_INTEL_PANTHERPOINT_LPC_MAX	0x1e5f
-#define PCI_DEVICE_ID_INTEL_DH89XXCC_LPC_MIN	0x2310
-#define PCI_DEVICE_ID_INTEL_DH89XXCC_LPC_MAX	0x231f
-#define PCI_DEVICE_ID_INTEL_82801AA_0	0x2410
-#define PCI_DEVICE_ID_INTEL_82801AA_1	0x2411
-#define PCI_DEVICE_ID_INTEL_82801AA_3	0x2413
-#define PCI_DEVICE_ID_INTEL_82801AA_5	0x2415
-#define PCI_DEVICE_ID_INTEL_82801AA_6	0x2416
-#define PCI_DEVICE_ID_INTEL_82801AA_8	0x2418
-#define PCI_DEVICE_ID_INTEL_82801AB_0	0x2420
-#define PCI_DEVICE_ID_INTEL_82801AB_1	0x2421
-#define PCI_DEVICE_ID_INTEL_82801AB_3	0x2423
-#define PCI_DEVICE_ID_INTEL_82801AB_5	0x2425
-#define PCI_DEVICE_ID_INTEL_82801AB_6	0x2426
-#define PCI_DEVICE_ID_INTEL_82801AB_8	0x2428
-#define PCI_DEVICE_ID_INTEL_82801BA_0	0x2440
-#define PCI_DEVICE_ID_INTEL_82801BA_2	0x2443
-#define PCI_DEVICE_ID_INTEL_82801BA_4	0x2445
-#define PCI_DEVICE_ID_INTEL_82801BA_6	0x2448
-#define PCI_DEVICE_ID_INTEL_82801BA_8	0x244a
-#define PCI_DEVICE_ID_INTEL_82801BA_9	0x244b
-#define PCI_DEVICE_ID_INTEL_82801BA_10	0x244c
-#define PCI_DEVICE_ID_INTEL_82801BA_11	0x244e
-#define PCI_DEVICE_ID_INTEL_82801E_0	0x2450
-#define PCI_DEVICE_ID_INTEL_82801E_11	0x245b
-#define PCI_DEVICE_ID_INTEL_82801CA_0	0x2480
-#define PCI_DEVICE_ID_INTEL_82801CA_3	0x2483
-#define PCI_DEVICE_ID_INTEL_82801CA_5	0x2485
-#define PCI_DEVICE_ID_INTEL_82801CA_6	0x2486
-#define PCI_DEVICE_ID_INTEL_82801CA_10	0x248a
-#define PCI_DEVICE_ID_INTEL_82801CA_11	0x248b
-#define PCI_DEVICE_ID_INTEL_82801CA_12	0x248c
-#define PCI_DEVICE_ID_INTEL_82801DB_0	0x24c0
-#define PCI_DEVICE_ID_INTEL_82801DB_1	0x24c1
-#define PCI_DEVICE_ID_INTEL_82801DB_2	0x24c2
-#define PCI_DEVICE_ID_INTEL_82801DB_3	0x24c3
-#define PCI_DEVICE_ID_INTEL_82801DB_5	0x24c5
-#define PCI_DEVICE_ID_INTEL_82801DB_6	0x24c6
-#define PCI_DEVICE_ID_INTEL_82801DB_9	0x24c9
-#define PCI_DEVICE_ID_INTEL_82801DB_10	0x24ca
-#define PCI_DEVICE_ID_INTEL_82801DB_11	0x24cb
-#define PCI_DEVICE_ID_INTEL_82801DB_12  0x24cc
-#define PCI_DEVICE_ID_INTEL_82801EB_0	0x24d0
-#define PCI_DEVICE_ID_INTEL_82801EB_1	0x24d1
-#define PCI_DEVICE_ID_INTEL_82801EB_3	0x24d3
-#define PCI_DEVICE_ID_INTEL_82801EB_5	0x24d5
-#define PCI_DEVICE_ID_INTEL_82801EB_6	0x24d6
-#define PCI_DEVICE_ID_INTEL_82801EB_11	0x24db
-#define PCI_DEVICE_ID_INTEL_82801EB_12	0x24dc
-#define PCI_DEVICE_ID_INTEL_82801EB_13	0x24dd
-#define PCI_DEVICE_ID_INTEL_ESB_1	0x25a1
-#define PCI_DEVICE_ID_INTEL_ESB_2	0x25a2
-#define PCI_DEVICE_ID_INTEL_ESB_4	0x25a4
-#define PCI_DEVICE_ID_INTEL_ESB_5	0x25a6
-#define PCI_DEVICE_ID_INTEL_ESB_9	0x25ab
-#define PCI_DEVICE_ID_INTEL_ESB_10	0x25ac
-#define PCI_DEVICE_ID_INTEL_82820_HB	0x2500
-#define PCI_DEVICE_ID_INTEL_82820_UP_HB	0x2501
-#define PCI_DEVICE_ID_INTEL_82850_HB	0x2530
-#define PCI_DEVICE_ID_INTEL_82860_HB	0x2531
-#define PCI_DEVICE_ID_INTEL_E7501_MCH	0x254c
-#define PCI_DEVICE_ID_INTEL_82845G_HB	0x2560
-#define PCI_DEVICE_ID_INTEL_82845G_IG	0x2562
-#define PCI_DEVICE_ID_INTEL_82865_HB	0x2570
-#define PCI_DEVICE_ID_INTEL_82865_IG	0x2572
-#define PCI_DEVICE_ID_INTEL_82875_HB	0x2578
-#define PCI_DEVICE_ID_INTEL_82915G_HB	0x2580
-#define PCI_DEVICE_ID_INTEL_82915G_IG	0x2582
-#define PCI_DEVICE_ID_INTEL_82915GM_HB	0x2590
-#define PCI_DEVICE_ID_INTEL_82915GM_IG	0x2592
-#define PCI_DEVICE_ID_INTEL_5000_ERR	0x25F0
-#define PCI_DEVICE_ID_INTEL_5000_FBD0	0x25F5
-#define PCI_DEVICE_ID_INTEL_5000_FBD1	0x25F6
-#define PCI_DEVICE_ID_INTEL_82945G_HB	0x2770
-#define PCI_DEVICE_ID_INTEL_82945G_IG	0x2772
-#define PCI_DEVICE_ID_INTEL_3000_HB	0x2778
-#define PCI_DEVICE_ID_INTEL_82945GM_HB	0x27A0
-#define PCI_DEVICE_ID_INTEL_82945GM_IG	0x27A2
-#define PCI_DEVICE_ID_INTEL_ICH6_0	0x2640
-#define PCI_DEVICE_ID_INTEL_ICH6_1	0x2641
-#define PCI_DEVICE_ID_INTEL_ICH6_2	0x2642
-#define PCI_DEVICE_ID_INTEL_ICH6_16	0x266a
-#define PCI_DEVICE_ID_INTEL_ICH6_17	0x266d
-#define PCI_DEVICE_ID_INTEL_ICH6_18	0x266e
-#define PCI_DEVICE_ID_INTEL_ICH6_19	0x266f
-#define PCI_DEVICE_ID_INTEL_ESB2_0	0x2670
-#define PCI_DEVICE_ID_INTEL_ESB2_14	0x2698
-#define PCI_DEVICE_ID_INTEL_ESB2_17	0x269b
-#define PCI_DEVICE_ID_INTEL_ESB2_18	0x269e
-#define PCI_DEVICE_ID_INTEL_ICH7_0	0x27b8
-#define PCI_DEVICE_ID_INTEL_ICH7_1	0x27b9
-#define PCI_DEVICE_ID_INTEL_ICH7_30	0x27b0
-#define PCI_DEVICE_ID_INTEL_TGP_LPC	0x27bc
-#define PCI_DEVICE_ID_INTEL_ICH7_31	0x27bd
-#define PCI_DEVICE_ID_INTEL_ICH7_17	0x27da
-#define PCI_DEVICE_ID_INTEL_ICH7_19	0x27dd
-#define PCI_DEVICE_ID_INTEL_ICH7_20	0x27de
-#define PCI_DEVICE_ID_INTEL_ICH7_21	0x27df
-#define PCI_DEVICE_ID_INTEL_ICH8_0	0x2810
-#define PCI_DEVICE_ID_INTEL_ICH8_1	0x2811
-#define PCI_DEVICE_ID_INTEL_ICH8_2	0x2812
-#define PCI_DEVICE_ID_INTEL_ICH8_3	0x2814
-#define PCI_DEVICE_ID_INTEL_ICH8_4	0x2815
-#define PCI_DEVICE_ID_INTEL_ICH8_5	0x283e
-#define PCI_DEVICE_ID_INTEL_ICH8_6	0x2850
-#define PCI_DEVICE_ID_INTEL_ICH9_0	0x2910
-#define PCI_DEVICE_ID_INTEL_ICH9_1	0x2917
-#define PCI_DEVICE_ID_INTEL_ICH9_2	0x2912
-#define PCI_DEVICE_ID_INTEL_ICH9_3	0x2913
-#define PCI_DEVICE_ID_INTEL_ICH9_4	0x2914
-#define PCI_DEVICE_ID_INTEL_ICH9_5	0x2919
-#define PCI_DEVICE_ID_INTEL_ICH9_6	0x2930
-#define PCI_DEVICE_ID_INTEL_ICH9_7	0x2916
-#define PCI_DEVICE_ID_INTEL_ICH9_8	0x2918
-#define PCI_DEVICE_ID_INTEL_I7_MCR	0x2c18
-#define PCI_DEVICE_ID_INTEL_I7_MC_TAD	0x2c19
-#define PCI_DEVICE_ID_INTEL_I7_MC_RAS	0x2c1a
-#define PCI_DEVICE_ID_INTEL_I7_MC_TEST	0x2c1c
-#define PCI_DEVICE_ID_INTEL_I7_MC_CH0_CTRL  0x2c20
-#define PCI_DEVICE_ID_INTEL_I7_MC_CH0_ADDR  0x2c21
-#define PCI_DEVICE_ID_INTEL_I7_MC_CH0_RANK  0x2c22
-#define PCI_DEVICE_ID_INTEL_I7_MC_CH0_TC    0x2c23
-#define PCI_DEVICE_ID_INTEL_I7_MC_CH1_CTRL  0x2c28
-#define PCI_DEVICE_ID_INTEL_I7_MC_CH1_ADDR  0x2c29
-#define PCI_DEVICE_ID_INTEL_I7_MC_CH1_RANK  0x2c2a
-#define PCI_DEVICE_ID_INTEL_I7_MC_CH1_TC    0x2c2b
-#define PCI_DEVICE_ID_INTEL_I7_MC_CH2_CTRL  0x2c30
-#define PCI_DEVICE_ID_INTEL_I7_MC_CH2_ADDR  0x2c31
-#define PCI_DEVICE_ID_INTEL_I7_MC_CH2_RANK  0x2c32
-#define PCI_DEVICE_ID_INTEL_I7_MC_CH2_TC    0x2c33
-#define PCI_DEVICE_ID_INTEL_I7_NONCORE	0x2c41
-#define PCI_DEVICE_ID_INTEL_I7_NONCORE_ALT 0x2c40
-#define PCI_DEVICE_ID_INTEL_LYNNFIELD_NONCORE     0x2c50
-#define PCI_DEVICE_ID_INTEL_LYNNFIELD_NONCORE_ALT 0x2c51
-#define PCI_DEVICE_ID_INTEL_LYNNFIELD_NONCORE_REV2 0x2c70
-#define PCI_DEVICE_ID_INTEL_LYNNFIELD_SAD         0x2c81
-#define PCI_DEVICE_ID_INTEL_LYNNFIELD_QPI_LINK0   0x2c90
-#define PCI_DEVICE_ID_INTEL_LYNNFIELD_QPI_PHY0    0x2c91
-#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MCR         0x2c98
-#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_TAD      0x2c99
-#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_TEST     0x2c9C
-#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_CTRL 0x2ca0
-#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_ADDR 0x2ca1
-#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_RANK 0x2ca2
-#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_TC   0x2ca3
-#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_CTRL 0x2ca8
-#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_ADDR 0x2ca9
-#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_RANK 0x2caa
-#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_TC   0x2cab
-#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MCR_REV2          0x2d98
-#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_TAD_REV2       0x2d99
-#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_RAS_REV2       0x2d9a
-#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_TEST_REV2      0x2d9c
-#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_CTRL_REV2  0x2da0
-#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_ADDR_REV2  0x2da1
-#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_RANK_REV2  0x2da2
-#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_TC_REV2    0x2da3
-#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_CTRL_REV2  0x2da8
-#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_ADDR_REV2  0x2da9
-#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_RANK_REV2  0x2daa
-#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_TC_REV2    0x2dab
-#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH2_CTRL_REV2  0x2db0
-#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH2_ADDR_REV2  0x2db1
-#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH2_RANK_REV2  0x2db2
-#define PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH2_TC_REV2    0x2db3
-#define PCI_DEVICE_ID_INTEL_82855PM_HB	0x3340
-#define PCI_DEVICE_ID_INTEL_IOAT_TBG4	0x3429
-#define PCI_DEVICE_ID_INTEL_IOAT_TBG5	0x342a
-#define PCI_DEVICE_ID_INTEL_IOAT_TBG6	0x342b
-#define PCI_DEVICE_ID_INTEL_IOAT_TBG7	0x342c
-#define PCI_DEVICE_ID_INTEL_X58_HUB_MGMT 0x342e
-#define PCI_DEVICE_ID_INTEL_IOAT_TBG0	0x3430
-#define PCI_DEVICE_ID_INTEL_IOAT_TBG1	0x3431
-#define PCI_DEVICE_ID_INTEL_IOAT_TBG2	0x3432
-#define PCI_DEVICE_ID_INTEL_IOAT_TBG3	0x3433
-#define PCI_DEVICE_ID_INTEL_82830_HB	0x3575
-#define PCI_DEVICE_ID_INTEL_82830_CGC	0x3577
-#define PCI_DEVICE_ID_INTEL_82854_HB	0x358c
-#define PCI_DEVICE_ID_INTEL_82854_IG	0x358e
-#define PCI_DEVICE_ID_INTEL_82855GM_HB	0x3580
-#define PCI_DEVICE_ID_INTEL_82855GM_IG	0x3582
-#define PCI_DEVICE_ID_INTEL_E7520_MCH	0x3590
-#define PCI_DEVICE_ID_INTEL_E7320_MCH	0x3592
-#define PCI_DEVICE_ID_INTEL_MCH_PA	0x3595
-#define PCI_DEVICE_ID_INTEL_MCH_PA1	0x3596
-#define PCI_DEVICE_ID_INTEL_MCH_PB	0x3597
-#define PCI_DEVICE_ID_INTEL_MCH_PB1	0x3598
-#define PCI_DEVICE_ID_INTEL_MCH_PC	0x3599
-#define PCI_DEVICE_ID_INTEL_MCH_PC1	0x359a
-#define PCI_DEVICE_ID_INTEL_E7525_MCH	0x359e
-#define PCI_DEVICE_ID_INTEL_I7300_MCH_ERR 0x360c
-#define PCI_DEVICE_ID_INTEL_I7300_MCH_FB0 0x360f
-#define PCI_DEVICE_ID_INTEL_I7300_MCH_FB1 0x3610
-#define PCI_DEVICE_ID_INTEL_IOAT_CNB	0x360b
-#define PCI_DEVICE_ID_INTEL_FBD_CNB	0x360c
-#define PCI_DEVICE_ID_INTEL_IOAT_JSF0	0x3710
-#define PCI_DEVICE_ID_INTEL_IOAT_JSF1	0x3711
-#define PCI_DEVICE_ID_INTEL_IOAT_JSF2	0x3712
-#define PCI_DEVICE_ID_INTEL_IOAT_JSF3	0x3713
-#define PCI_DEVICE_ID_INTEL_IOAT_JSF4	0x3714
-#define PCI_DEVICE_ID_INTEL_IOAT_JSF5	0x3715
-#define PCI_DEVICE_ID_INTEL_IOAT_JSF6	0x3716
-#define PCI_DEVICE_ID_INTEL_IOAT_JSF7	0x3717
-#define PCI_DEVICE_ID_INTEL_IOAT_JSF8	0x3718
-#define PCI_DEVICE_ID_INTEL_IOAT_JSF9	0x3719
-#define PCI_DEVICE_ID_INTEL_ICH10_0	0x3a14
-#define PCI_DEVICE_ID_INTEL_ICH10_1	0x3a16
-#define PCI_DEVICE_ID_INTEL_ICH10_2	0x3a18
-#define PCI_DEVICE_ID_INTEL_ICH10_3	0x3a1a
-#define PCI_DEVICE_ID_INTEL_ICH10_4	0x3a30
-#define PCI_DEVICE_ID_INTEL_ICH10_5	0x3a60
-#define PCI_DEVICE_ID_INTEL_5_3400_SERIES_LPC_MIN	0x3b00
-#define PCI_DEVICE_ID_INTEL_5_3400_SERIES_LPC_MAX	0x3b1f
-#define PCI_DEVICE_ID_INTEL_IOAT_SNB0	0x3c20
-#define PCI_DEVICE_ID_INTEL_IOAT_SNB1	0x3c21
-#define PCI_DEVICE_ID_INTEL_IOAT_SNB2	0x3c22
-#define PCI_DEVICE_ID_INTEL_IOAT_SNB3	0x3c23
-#define PCI_DEVICE_ID_INTEL_IOAT_SNB4	0x3c24
-#define PCI_DEVICE_ID_INTEL_IOAT_SNB5	0x3c25
-#define PCI_DEVICE_ID_INTEL_IOAT_SNB6	0x3c26
-#define PCI_DEVICE_ID_INTEL_IOAT_SNB7	0x3c27
-#define PCI_DEVICE_ID_INTEL_IOAT_SNB8	0x3c2e
-#define PCI_DEVICE_ID_INTEL_IOAT_SNB9	0x3c2f
-#define PCI_DEVICE_ID_INTEL_IOAT_SNB	0x402f
-#define PCI_DEVICE_ID_INTEL_5100_16	0x65f0
-#define PCI_DEVICE_ID_INTEL_5100_21	0x65f5
-#define PCI_DEVICE_ID_INTEL_5100_22	0x65f6
-#define PCI_DEVICE_ID_INTEL_5400_ERR	0x4030
-#define PCI_DEVICE_ID_INTEL_5400_FBD0	0x4035
-#define PCI_DEVICE_ID_INTEL_5400_FBD1	0x4036
-#define PCI_DEVICE_ID_INTEL_IOAT_SCNB	0x65ff
-#define PCI_DEVICE_ID_INTEL_EP80579_0	0x5031
-#define PCI_DEVICE_ID_INTEL_EP80579_1	0x5032
-#define PCI_DEVICE_ID_INTEL_82371SB_0	0x7000
-#define PCI_DEVICE_ID_INTEL_82371SB_1	0x7010
-#define PCI_DEVICE_ID_INTEL_82371SB_2	0x7020
-#define PCI_DEVICE_ID_INTEL_82437VX	0x7030
-#define PCI_DEVICE_ID_INTEL_82439TX	0x7100
-#define PCI_DEVICE_ID_INTEL_82371AB_0	0x7110
-#define PCI_DEVICE_ID_INTEL_82371AB	0x7111
-#define PCI_DEVICE_ID_INTEL_82371AB_2	0x7112
-#define PCI_DEVICE_ID_INTEL_82371AB_3	0x7113
-#define PCI_DEVICE_ID_INTEL_82810_MC1	0x7120
-#define PCI_DEVICE_ID_INTEL_82810_IG1	0x7121
-#define PCI_DEVICE_ID_INTEL_82810_MC3	0x7122
-#define PCI_DEVICE_ID_INTEL_82810_IG3	0x7123
-#define PCI_DEVICE_ID_INTEL_82810E_MC	0x7124
-#define PCI_DEVICE_ID_INTEL_82810E_IG	0x7125
-#define PCI_DEVICE_ID_INTEL_82443LX_0	0x7180
-#define PCI_DEVICE_ID_INTEL_82443LX_1	0x7181
-#define PCI_DEVICE_ID_INTEL_82443BX_0	0x7190
-#define PCI_DEVICE_ID_INTEL_82443BX_1	0x7191
-#define PCI_DEVICE_ID_INTEL_82443BX_2	0x7192
-#define PCI_DEVICE_ID_INTEL_440MX	0x7195
-#define PCI_DEVICE_ID_INTEL_440MX_6	0x7196
-#define PCI_DEVICE_ID_INTEL_82443MX_0	0x7198
-#define PCI_DEVICE_ID_INTEL_82443MX_1	0x7199
-#define PCI_DEVICE_ID_INTEL_82443MX_3	0x719b
-#define PCI_DEVICE_ID_INTEL_82443GX_0	0x71a0
-#define PCI_DEVICE_ID_INTEL_82443GX_2	0x71a2
-#define PCI_DEVICE_ID_INTEL_82372FB_1	0x7601
-#define PCI_DEVICE_ID_INTEL_SCH_LPC	0x8119
-#define PCI_DEVICE_ID_INTEL_SCH_IDE	0x811a
-#define PCI_DEVICE_ID_INTEL_ITC_LPC	0x8186
-#define PCI_DEVICE_ID_INTEL_82454GX	0x84c4
-#define PCI_DEVICE_ID_INTEL_82450GX	0x84c5
-#define PCI_DEVICE_ID_INTEL_82451NX	0x84ca
-#define PCI_DEVICE_ID_INTEL_82454NX     0x84cb
-#define PCI_DEVICE_ID_INTEL_84460GX	0x84ea
-#define PCI_DEVICE_ID_INTEL_IXP4XX	0x8500
-#define PCI_DEVICE_ID_INTEL_IXP2800	0x9004
-#define PCI_DEVICE_ID_INTEL_S21152BB	0xb152
-
-#define PCI_VENDOR_ID_SCALEMP		0x8686
-#define PCI_DEVICE_ID_SCALEMP_VSMP_CTL	0x1010
-
-#define PCI_VENDOR_ID_COMPUTONE		0x8e0e
-#define PCI_DEVICE_ID_COMPUTONE_IP2EX	0x0291
-#define PCI_DEVICE_ID_COMPUTONE_PG	0x0302
-#define PCI_SUBVENDOR_ID_COMPUTONE	0x8e0e
-#define PCI_SUBDEVICE_ID_COMPUTONE_PG4	0x0001
-#define PCI_SUBDEVICE_ID_COMPUTONE_PG8	0x0002
-#define PCI_SUBDEVICE_ID_COMPUTONE_PG6	0x0003
-
-#define PCI_VENDOR_ID_KTI		0x8e2e
-
-#define PCI_VENDOR_ID_ADAPTEC		0x9004
-#define PCI_DEVICE_ID_ADAPTEC_7810	0x1078
-#define PCI_DEVICE_ID_ADAPTEC_7821	0x2178
-#define PCI_DEVICE_ID_ADAPTEC_38602	0x3860
-#define PCI_DEVICE_ID_ADAPTEC_7850	0x5078
-#define PCI_DEVICE_ID_ADAPTEC_7855	0x5578
-#define PCI_DEVICE_ID_ADAPTEC_3860	0x6038
-#define PCI_DEVICE_ID_ADAPTEC_1480A	0x6075
-#define PCI_DEVICE_ID_ADAPTEC_7860	0x6078
-#define PCI_DEVICE_ID_ADAPTEC_7861	0x6178
-#define PCI_DEVICE_ID_ADAPTEC_7870	0x7078
-#define PCI_DEVICE_ID_ADAPTEC_7871	0x7178
-#define PCI_DEVICE_ID_ADAPTEC_7872	0x7278
-#define PCI_DEVICE_ID_ADAPTEC_7873	0x7378
-#define PCI_DEVICE_ID_ADAPTEC_7874	0x7478
-#define PCI_DEVICE_ID_ADAPTEC_7895	0x7895
-#define PCI_DEVICE_ID_ADAPTEC_7880	0x8078
-#define PCI_DEVICE_ID_ADAPTEC_7881	0x8178
-#define PCI_DEVICE_ID_ADAPTEC_7882	0x8278
-#define PCI_DEVICE_ID_ADAPTEC_7883	0x8378
-#define PCI_DEVICE_ID_ADAPTEC_7884	0x8478
-#define PCI_DEVICE_ID_ADAPTEC_7885	0x8578
-#define PCI_DEVICE_ID_ADAPTEC_7886	0x8678
-#define PCI_DEVICE_ID_ADAPTEC_7887	0x8778
-#define PCI_DEVICE_ID_ADAPTEC_7888	0x8878
-
-#define PCI_VENDOR_ID_ADAPTEC2		0x9005
-#define PCI_DEVICE_ID_ADAPTEC2_2940U2	0x0010
-#define PCI_DEVICE_ID_ADAPTEC2_2930U2	0x0011
-#define PCI_DEVICE_ID_ADAPTEC2_7890B	0x0013
-#define PCI_DEVICE_ID_ADAPTEC2_7890	0x001f
-#define PCI_DEVICE_ID_ADAPTEC2_3940U2	0x0050
-#define PCI_DEVICE_ID_ADAPTEC2_3950U2D	0x0051
-#define PCI_DEVICE_ID_ADAPTEC2_7896	0x005f
-#define PCI_DEVICE_ID_ADAPTEC2_7892A	0x0080
-#define PCI_DEVICE_ID_ADAPTEC2_7892B	0x0081
-#define PCI_DEVICE_ID_ADAPTEC2_7892D	0x0083
-#define PCI_DEVICE_ID_ADAPTEC2_7892P	0x008f
-#define PCI_DEVICE_ID_ADAPTEC2_7899A	0x00c0
-#define PCI_DEVICE_ID_ADAPTEC2_7899B	0x00c1
-#define PCI_DEVICE_ID_ADAPTEC2_7899D	0x00c3
-#define PCI_DEVICE_ID_ADAPTEC2_7899P	0x00cf
-#define PCI_DEVICE_ID_ADAPTEC2_OBSIDIAN   0x0500
-#define PCI_DEVICE_ID_ADAPTEC2_SCAMP	0x0503
-
-#define PCI_VENDOR_ID_HOLTEK		0x9412
-#define PCI_DEVICE_ID_HOLTEK_6565	0x6565
-
-#define PCI_VENDOR_ID_NETMOS		0x9710
-#define PCI_DEVICE_ID_NETMOS_9705	0x9705
-#define PCI_DEVICE_ID_NETMOS_9715	0x9715
-#define PCI_DEVICE_ID_NETMOS_9735	0x9735
-#define PCI_DEVICE_ID_NETMOS_9745	0x9745
-#define PCI_DEVICE_ID_NETMOS_9755	0x9755
-#define PCI_DEVICE_ID_NETMOS_9805	0x9805
-#define PCI_DEVICE_ID_NETMOS_9815	0x9815
-#define PCI_DEVICE_ID_NETMOS_9835	0x9835
-#define PCI_DEVICE_ID_NETMOS_9845	0x9845
-#define PCI_DEVICE_ID_NETMOS_9855	0x9855
-#define PCI_DEVICE_ID_NETMOS_9865	0x9865
-#define PCI_DEVICE_ID_NETMOS_9900	0x9900
-#define PCI_DEVICE_ID_NETMOS_9901	0x9901
-#define PCI_DEVICE_ID_NETMOS_9904	0x9904
-#define PCI_DEVICE_ID_NETMOS_9912	0x9912
-#define PCI_DEVICE_ID_NETMOS_9922	0x9922
-
-#define PCI_VENDOR_ID_3COM_2		0xa727
-
-#define PCI_VENDOR_ID_DIGIUM		0xd161
-#define PCI_DEVICE_ID_DIGIUM_HFC4S	0xb410
-
-#define PCI_SUBVENDOR_ID_EXSYS		0xd84d
-#define PCI_SUBDEVICE_ID_EXSYS_4014	0x4014
-#define PCI_SUBDEVICE_ID_EXSYS_4055	0x4055
-
-#define PCI_VENDOR_ID_TIGERJET		0xe159
-#define PCI_DEVICE_ID_TIGERJET_300	0x0001
-#define PCI_DEVICE_ID_TIGERJET_100	0x0002
-
-#define PCI_VENDOR_ID_XILINX_RME	0xea60
-#define PCI_DEVICE_ID_RME_DIGI32	0x9896
-#define PCI_DEVICE_ID_RME_DIGI32_PRO	0x9897
-#define PCI_DEVICE_ID_RME_DIGI32_8	0x9898
-
-#define PCI_VENDOR_ID_XEN		0x5853
-#define PCI_DEVICE_ID_XEN_PLATFORM	0x0001
-
-#define PCI_VENDOR_ID_OCZ		0x1b85
diff --git a/ANDROID_3.4.5/include/linux/pci_regs.h b/ANDROID_3.4.5/include/linux/pci_regs.h
deleted file mode 100644
index 4b608f54..00000000
--- a/ANDROID_3.4.5/include/linux/pci_regs.h
+++ /dev/null
@@ -1,738 +0,0 @@
-/*
- *	pci_regs.h
- *
- *	PCI standard defines
- *	Copyright 1994, Drew Eckhardt
- *	Copyright 1997--1999 Martin Mares <mj@ucw.cz>
- *
- *	For more information, please consult the following manuals (look at
- *	http://www.pcisig.com/ for how to get them):
- *
- *	PCI BIOS Specification
- *	PCI Local Bus Specification
- *	PCI to PCI Bridge Specification
- *	PCI System Design Guide
- *
- * 	For hypertransport information, please consult the following manuals
- * 	from http://www.hypertransport.org
- *
- *	The Hypertransport I/O Link Specification
- */
-
-#ifndef LINUX_PCI_REGS_H
-#define LINUX_PCI_REGS_H
-
-/*
- * Under PCI, each device has 256 bytes of configuration address space,
- * of which the first 64 bytes are standardized as follows:
- */
-#define PCI_VENDOR_ID		0x00	/* 16 bits */
-#define PCI_DEVICE_ID		0x02	/* 16 bits */
-#define PCI_COMMAND		0x04	/* 16 bits */
-#define  PCI_COMMAND_IO		0x1	/* Enable response in I/O space */
-#define  PCI_COMMAND_MEMORY	0x2	/* Enable response in Memory space */
-#define  PCI_COMMAND_MASTER	0x4	/* Enable bus mastering */
-#define  PCI_COMMAND_SPECIAL	0x8	/* Enable response to special cycles */
-#define  PCI_COMMAND_INVALIDATE	0x10	/* Use memory write and invalidate */
-#define  PCI_COMMAND_VGA_PALETTE 0x20	/* Enable palette snooping */
-#define  PCI_COMMAND_PARITY	0x40	/* Enable parity checking */
-#define  PCI_COMMAND_WAIT 	0x80	/* Enable address/data stepping */
-#define  PCI_COMMAND_SERR	0x100	/* Enable SERR */
-#define  PCI_COMMAND_FAST_BACK	0x200	/* Enable back-to-back writes */
-#define  PCI_COMMAND_INTX_DISABLE 0x400 /* INTx Emulation Disable */
-
-#define PCI_STATUS		0x06	/* 16 bits */
-#define  PCI_STATUS_INTERRUPT	0x08	/* Interrupt status */
-#define  PCI_STATUS_CAP_LIST	0x10	/* Support Capability List */
-#define  PCI_STATUS_66MHZ	0x20	/* Support 66 Mhz PCI 2.1 bus */
-#define  PCI_STATUS_UDF		0x40	/* Support User Definable Features [obsolete] */
-#define  PCI_STATUS_FAST_BACK	0x80	/* Accept fast-back to back */
-#define  PCI_STATUS_PARITY	0x100	/* Detected parity error */
-#define  PCI_STATUS_DEVSEL_MASK	0x600	/* DEVSEL timing */
-#define  PCI_STATUS_DEVSEL_FAST		0x000
-#define  PCI_STATUS_DEVSEL_MEDIUM	0x200
-#define  PCI_STATUS_DEVSEL_SLOW		0x400
-#define  PCI_STATUS_SIG_TARGET_ABORT	0x800 /* Set on target abort */
-#define  PCI_STATUS_REC_TARGET_ABORT	0x1000 /* Master ack of " */
-#define  PCI_STATUS_REC_MASTER_ABORT	0x2000 /* Set on master abort */
-#define  PCI_STATUS_SIG_SYSTEM_ERROR	0x4000 /* Set when we drive SERR */
-#define  PCI_STATUS_DETECTED_PARITY	0x8000 /* Set on parity error */
-
-#define PCI_CLASS_REVISION	0x08	/* High 24 bits are class, low 8 revision */
-#define PCI_REVISION_ID		0x08	/* Revision ID */
-#define PCI_CLASS_PROG		0x09	/* Reg. Level Programming Interface */
-#define PCI_CLASS_DEVICE	0x0a	/* Device class */
-
-#define PCI_CACHE_LINE_SIZE	0x0c	/* 8 bits */
-#define PCI_LATENCY_TIMER	0x0d	/* 8 bits */
-#define PCI_HEADER_TYPE		0x0e	/* 8 bits */
-#define  PCI_HEADER_TYPE_NORMAL		0
-#define  PCI_HEADER_TYPE_BRIDGE		1
-#define  PCI_HEADER_TYPE_CARDBUS	2
-
-#define PCI_BIST		0x0f	/* 8 bits */
-#define  PCI_BIST_CODE_MASK	0x0f	/* Return result */
-#define  PCI_BIST_START		0x40	/* 1 to start BIST, 2 secs or less */
-#define  PCI_BIST_CAPABLE	0x80	/* 1 if BIST capable */
-
-/*
- * Base addresses specify locations in memory or I/O space.
- * Decoded size can be determined by writing a value of
- * 0xffffffff to the register, and reading it back.  Only
- * 1 bits are decoded.
- */
-#define PCI_BASE_ADDRESS_0	0x10	/* 32 bits */
-#define PCI_BASE_ADDRESS_1	0x14	/* 32 bits [htype 0,1 only] */
-#define PCI_BASE_ADDRESS_2	0x18	/* 32 bits [htype 0 only] */
-#define PCI_BASE_ADDRESS_3	0x1c	/* 32 bits */
-#define PCI_BASE_ADDRESS_4	0x20	/* 32 bits */
-#define PCI_BASE_ADDRESS_5	0x24	/* 32 bits */
-#define  PCI_BASE_ADDRESS_SPACE		0x01	/* 0 = memory, 1 = I/O */
-#define  PCI_BASE_ADDRESS_SPACE_IO	0x01
-#define  PCI_BASE_ADDRESS_SPACE_MEMORY	0x00
-#define  PCI_BASE_ADDRESS_MEM_TYPE_MASK	0x06
-#define  PCI_BASE_ADDRESS_MEM_TYPE_32	0x00	/* 32 bit address */
-#define  PCI_BASE_ADDRESS_MEM_TYPE_1M	0x02	/* Below 1M [obsolete] */
-#define  PCI_BASE_ADDRESS_MEM_TYPE_64	0x04	/* 64 bit address */
-#define  PCI_BASE_ADDRESS_MEM_PREFETCH	0x08	/* prefetchable? */
-#define  PCI_BASE_ADDRESS_MEM_MASK	(~0x0fUL)
-#define  PCI_BASE_ADDRESS_IO_MASK	(~0x03UL)
-/* bit 1 is reserved if address_space = 1 */
-
-/* Header type 0 (normal devices) */
-#define PCI_CARDBUS_CIS		0x28
-#define PCI_SUBSYSTEM_VENDOR_ID	0x2c
-#define PCI_SUBSYSTEM_ID	0x2e
-#define PCI_ROM_ADDRESS		0x30	/* Bits 31..11 are address, 10..1 reserved */
-#define  PCI_ROM_ADDRESS_ENABLE	0x01
-#define PCI_ROM_ADDRESS_MASK	(~0x7ffUL)
-
-#define PCI_CAPABILITY_LIST	0x34	/* Offset of first capability list entry */
-
-/* 0x35-0x3b are reserved */
-#define PCI_INTERRUPT_LINE	0x3c	/* 8 bits */
-#define PCI_INTERRUPT_PIN	0x3d	/* 8 bits */
-#define PCI_MIN_GNT		0x3e	/* 8 bits */
-#define PCI_MAX_LAT		0x3f	/* 8 bits */
-
-/* Header type 1 (PCI-to-PCI bridges) */
-#define PCI_PRIMARY_BUS		0x18	/* Primary bus number */
-#define PCI_SECONDARY_BUS	0x19	/* Secondary bus number */
-#define PCI_SUBORDINATE_BUS	0x1a	/* Highest bus number behind the bridge */
-#define PCI_SEC_LATENCY_TIMER	0x1b	/* Latency timer for secondary interface */
-#define PCI_IO_BASE		0x1c	/* I/O range behind the bridge */
-#define PCI_IO_LIMIT		0x1d
-#define  PCI_IO_RANGE_TYPE_MASK	0x0fUL	/* I/O bridging type */
-#define  PCI_IO_RANGE_TYPE_16	0x00
-#define  PCI_IO_RANGE_TYPE_32	0x01
-#define  PCI_IO_RANGE_MASK	(~0x0fUL)
-#define PCI_SEC_STATUS		0x1e	/* Secondary status register, only bit 14 used */
-#define PCI_MEMORY_BASE		0x20	/* Memory range behind */
-#define PCI_MEMORY_LIMIT	0x22
-#define  PCI_MEMORY_RANGE_TYPE_MASK 0x0fUL
-#define  PCI_MEMORY_RANGE_MASK	(~0x0fUL)
-#define PCI_PREF_MEMORY_BASE	0x24	/* Prefetchable memory range behind */
-#define PCI_PREF_MEMORY_LIMIT	0x26
-#define  PCI_PREF_RANGE_TYPE_MASK 0x0fUL
-#define  PCI_PREF_RANGE_TYPE_32	0x00
-#define  PCI_PREF_RANGE_TYPE_64	0x01
-#define  PCI_PREF_RANGE_MASK	(~0x0fUL)
-#define PCI_PREF_BASE_UPPER32	0x28	/* Upper half of prefetchable memory range */
-#define PCI_PREF_LIMIT_UPPER32	0x2c
-#define PCI_IO_BASE_UPPER16	0x30	/* Upper half of I/O addresses */
-#define PCI_IO_LIMIT_UPPER16	0x32
-/* 0x34 same as for htype 0 */
-/* 0x35-0x3b is reserved */
-#define PCI_ROM_ADDRESS1	0x38	/* Same as PCI_ROM_ADDRESS, but for htype 1 */
-/* 0x3c-0x3d are same as for htype 0 */
-#define PCI_BRIDGE_CONTROL	0x3e
-#define  PCI_BRIDGE_CTL_PARITY	0x01	/* Enable parity detection on secondary interface */
-#define  PCI_BRIDGE_CTL_SERR	0x02	/* The same for SERR forwarding */
-#define  PCI_BRIDGE_CTL_ISA	0x04	/* Enable ISA mode */
-#define  PCI_BRIDGE_CTL_VGA	0x08	/* Forward VGA addresses */
-#define  PCI_BRIDGE_CTL_MASTER_ABORT	0x20  /* Report master aborts */
-#define  PCI_BRIDGE_CTL_BUS_RESET	0x40	/* Secondary bus reset */
-#define  PCI_BRIDGE_CTL_FAST_BACK	0x80	/* Fast Back2Back enabled on secondary interface */
-
-/* Header type 2 (CardBus bridges) */
-#define PCI_CB_CAPABILITY_LIST	0x14
-/* 0x15 reserved */
-#define PCI_CB_SEC_STATUS	0x16	/* Secondary status */
-#define PCI_CB_PRIMARY_BUS	0x18	/* PCI bus number */
-#define PCI_CB_CARD_BUS		0x19	/* CardBus bus number */
-#define PCI_CB_SUBORDINATE_BUS	0x1a	/* Subordinate bus number */
-#define PCI_CB_LATENCY_TIMER	0x1b	/* CardBus latency timer */
-#define PCI_CB_MEMORY_BASE_0	0x1c
-#define PCI_CB_MEMORY_LIMIT_0	0x20
-#define PCI_CB_MEMORY_BASE_1	0x24
-#define PCI_CB_MEMORY_LIMIT_1	0x28
-#define PCI_CB_IO_BASE_0	0x2c
-#define PCI_CB_IO_BASE_0_HI	0x2e
-#define PCI_CB_IO_LIMIT_0	0x30
-#define PCI_CB_IO_LIMIT_0_HI	0x32
-#define PCI_CB_IO_BASE_1	0x34
-#define PCI_CB_IO_BASE_1_HI	0x36
-#define PCI_CB_IO_LIMIT_1	0x38
-#define PCI_CB_IO_LIMIT_1_HI	0x3a
-#define  PCI_CB_IO_RANGE_MASK	(~0x03UL)
-/* 0x3c-0x3d are same as for htype 0 */
-#define PCI_CB_BRIDGE_CONTROL	0x3e
-#define  PCI_CB_BRIDGE_CTL_PARITY	0x01	/* Similar to standard bridge control register */
-#define  PCI_CB_BRIDGE_CTL_SERR		0x02
-#define  PCI_CB_BRIDGE_CTL_ISA		0x04
-#define  PCI_CB_BRIDGE_CTL_VGA		0x08
-#define  PCI_CB_BRIDGE_CTL_MASTER_ABORT	0x20
-#define  PCI_CB_BRIDGE_CTL_CB_RESET	0x40	/* CardBus reset */
-#define  PCI_CB_BRIDGE_CTL_16BIT_INT	0x80	/* Enable interrupt for 16-bit cards */
-#define  PCI_CB_BRIDGE_CTL_PREFETCH_MEM0 0x100	/* Prefetch enable for both memory regions */
-#define  PCI_CB_BRIDGE_CTL_PREFETCH_MEM1 0x200
-#define  PCI_CB_BRIDGE_CTL_POST_WRITES	0x400
-#define PCI_CB_SUBSYSTEM_VENDOR_ID	0x40
-#define PCI_CB_SUBSYSTEM_ID		0x42
-#define PCI_CB_LEGACY_MODE_BASE		0x44	/* 16-bit PC Card legacy mode base address (ExCa) */
-/* 0x48-0x7f reserved */
-
-/* Capability lists */
-
-#define PCI_CAP_LIST_ID		0	/* Capability ID */
-#define  PCI_CAP_ID_PM		0x01	/* Power Management */
-#define  PCI_CAP_ID_AGP		0x02	/* Accelerated Graphics Port */
-#define  PCI_CAP_ID_VPD		0x03	/* Vital Product Data */
-#define  PCI_CAP_ID_SLOTID	0x04	/* Slot Identification */
-#define  PCI_CAP_ID_MSI		0x05	/* Message Signalled Interrupts */
-#define  PCI_CAP_ID_CHSWP	0x06	/* CompactPCI HotSwap */
-#define  PCI_CAP_ID_PCIX	0x07	/* PCI-X */
-#define  PCI_CAP_ID_HT		0x08	/* HyperTransport */
-#define  PCI_CAP_ID_VNDR	0x09	/* Vendor specific */
-#define  PCI_CAP_ID_DBG		0x0A	/* Debug port */
-#define  PCI_CAP_ID_CCRC	0x0B	/* CompactPCI Central Resource Control */
-#define  PCI_CAP_ID_SHPC 	0x0C	/* PCI Standard Hot-Plug Controller */
-#define  PCI_CAP_ID_SSVID	0x0D	/* Bridge subsystem vendor/device ID */
-#define  PCI_CAP_ID_AGP3	0x0E	/* AGP Target PCI-PCI bridge */
-#define  PCI_CAP_ID_EXP 	0x10	/* PCI Express */
-#define  PCI_CAP_ID_MSIX	0x11	/* MSI-X */
-#define  PCI_CAP_ID_AF		0x13	/* PCI Advanced Features */
-#define PCI_CAP_LIST_NEXT	1	/* Next capability in the list */
-#define PCI_CAP_FLAGS		2	/* Capability defined flags (16 bits) */
-#define PCI_CAP_SIZEOF		4
-
-/* Power Management Registers */
-
-#define PCI_PM_PMC		2	/* PM Capabilities Register */
-#define  PCI_PM_CAP_VER_MASK	0x0007	/* Version */
-#define  PCI_PM_CAP_PME_CLOCK	0x0008	/* PME clock required */
-#define  PCI_PM_CAP_RESERVED    0x0010  /* Reserved field */
-#define  PCI_PM_CAP_DSI		0x0020	/* Device specific initialization */
-#define  PCI_PM_CAP_AUX_POWER	0x01C0	/* Auxiliary power support mask */
-#define  PCI_PM_CAP_D1		0x0200	/* D1 power state support */
-#define  PCI_PM_CAP_D2		0x0400	/* D2 power state support */
-#define  PCI_PM_CAP_PME		0x0800	/* PME pin supported */
-#define  PCI_PM_CAP_PME_MASK	0xF800	/* PME Mask of all supported states */
-#define  PCI_PM_CAP_PME_D0	0x0800	/* PME# from D0 */
-#define  PCI_PM_CAP_PME_D1	0x1000	/* PME# from D1 */
-#define  PCI_PM_CAP_PME_D2	0x2000	/* PME# from D2 */
-#define  PCI_PM_CAP_PME_D3	0x4000	/* PME# from D3 (hot) */
-#define  PCI_PM_CAP_PME_D3cold	0x8000	/* PME# from D3 (cold) */
-#define  PCI_PM_CAP_PME_SHIFT	11	/* Start of the PME Mask in PMC */
-#define PCI_PM_CTRL		4	/* PM control and status register */
-#define  PCI_PM_CTRL_STATE_MASK	0x0003	/* Current power state (D0 to D3) */
-#define  PCI_PM_CTRL_NO_SOFT_RESET	0x0008	/* No reset for D3hot->D0 */
-#define  PCI_PM_CTRL_PME_ENABLE	0x0100	/* PME pin enable */
-#define  PCI_PM_CTRL_DATA_SEL_MASK	0x1e00	/* Data select (??) */
-#define  PCI_PM_CTRL_DATA_SCALE_MASK	0x6000	/* Data scale (??) */
-#define  PCI_PM_CTRL_PME_STATUS	0x8000	/* PME pin status */
-#define PCI_PM_PPB_EXTENSIONS	6	/* PPB support extensions (??) */
-#define  PCI_PM_PPB_B2_B3	0x40	/* Stop clock when in D3hot (??) */
-#define  PCI_PM_BPCC_ENABLE	0x80	/* Bus power/clock control enable (??) */
-#define PCI_PM_DATA_REGISTER	7	/* (??) */
-#define PCI_PM_SIZEOF		8
-
-/* AGP registers */
-
-#define PCI_AGP_VERSION		2	/* BCD version number */
-#define PCI_AGP_RFU		3	/* Rest of capability flags */
-#define PCI_AGP_STATUS		4	/* Status register */
-#define  PCI_AGP_STATUS_RQ_MASK	0xff000000	/* Maximum number of requests - 1 */
-#define  PCI_AGP_STATUS_SBA	0x0200	/* Sideband addressing supported */
-#define  PCI_AGP_STATUS_64BIT	0x0020	/* 64-bit addressing supported */
-#define  PCI_AGP_STATUS_FW	0x0010	/* FW transfers supported */
-#define  PCI_AGP_STATUS_RATE4	0x0004	/* 4x transfer rate supported */
-#define  PCI_AGP_STATUS_RATE2	0x0002	/* 2x transfer rate supported */
-#define  PCI_AGP_STATUS_RATE1	0x0001	/* 1x transfer rate supported */
-#define PCI_AGP_COMMAND		8	/* Control register */
-#define  PCI_AGP_COMMAND_RQ_MASK 0xff000000  /* Master: Maximum number of requests */
-#define  PCI_AGP_COMMAND_SBA	0x0200	/* Sideband addressing enabled */
-#define  PCI_AGP_COMMAND_AGP	0x0100	/* Allow processing of AGP transactions */
-#define  PCI_AGP_COMMAND_64BIT	0x0020 	/* Allow processing of 64-bit addresses */
-#define  PCI_AGP_COMMAND_FW	0x0010 	/* Force FW transfers */
-#define  PCI_AGP_COMMAND_RATE4	0x0004	/* Use 4x rate */
-#define  PCI_AGP_COMMAND_RATE2	0x0002	/* Use 2x rate */
-#define  PCI_AGP_COMMAND_RATE1	0x0001	/* Use 1x rate */
-#define PCI_AGP_SIZEOF		12
-
-/* Vital Product Data */
-
-#define PCI_VPD_ADDR		2	/* Address to access (15 bits!) */
-#define  PCI_VPD_ADDR_MASK	0x7fff	/* Address mask */
-#define  PCI_VPD_ADDR_F		0x8000	/* Write 0, 1 indicates completion */
-#define PCI_VPD_DATA		4	/* 32-bits of data returned here */
-
-/* Slot Identification */
-
-#define PCI_SID_ESR		2	/* Expansion Slot Register */
-#define  PCI_SID_ESR_NSLOTS	0x1f	/* Number of expansion slots available */
-#define  PCI_SID_ESR_FIC	0x20	/* First In Chassis Flag */
-#define PCI_SID_CHASSIS_NR	3	/* Chassis Number */
-
-/* Message Signalled Interrupts registers */
-
-#define PCI_MSI_FLAGS		2	/* Various flags */
-#define  PCI_MSI_FLAGS_64BIT	0x80	/* 64-bit addresses allowed */
-#define  PCI_MSI_FLAGS_QSIZE	0x70	/* Message queue size configured */
-#define  PCI_MSI_FLAGS_QMASK	0x0e	/* Maximum queue size available */
-#define  PCI_MSI_FLAGS_ENABLE	0x01	/* MSI feature enabled */
-#define  PCI_MSI_FLAGS_MASKBIT	0x100	/* 64-bit mask bits allowed */
-#define PCI_MSI_RFU		3	/* Rest of capability flags */
-#define PCI_MSI_ADDRESS_LO	4	/* Lower 32 bits */
-#define PCI_MSI_ADDRESS_HI	8	/* Upper 32 bits (if PCI_MSI_FLAGS_64BIT set) */
-#define PCI_MSI_DATA_32		8	/* 16 bits of data for 32-bit devices */
-#define PCI_MSI_MASK_32		12	/* Mask bits register for 32-bit devices */
-#define PCI_MSI_DATA_64		12	/* 16 bits of data for 64-bit devices */
-#define PCI_MSI_MASK_64		16	/* Mask bits register for 64-bit devices */
-
-/* MSI-X registers */
-#define PCI_MSIX_FLAGS		2
-#define  PCI_MSIX_FLAGS_QSIZE	0x7FF
-#define  PCI_MSIX_FLAGS_ENABLE	(1 << 15)
-#define  PCI_MSIX_FLAGS_MASKALL	(1 << 14)
-#define PCI_MSIX_TABLE		4
-#define PCI_MSIX_PBA		8
-#define  PCI_MSIX_FLAGS_BIRMASK	(7 << 0)
-
-/* MSI-X entry's format */
-#define PCI_MSIX_ENTRY_SIZE		16
-#define  PCI_MSIX_ENTRY_LOWER_ADDR	0
-#define  PCI_MSIX_ENTRY_UPPER_ADDR	4
-#define  PCI_MSIX_ENTRY_DATA		8
-#define  PCI_MSIX_ENTRY_VECTOR_CTRL	12
-#define   PCI_MSIX_ENTRY_CTRL_MASKBIT	1
-
-/* CompactPCI Hotswap Register */
-
-#define PCI_CHSWP_CSR		2	/* Control and Status Register */
-#define  PCI_CHSWP_DHA		0x01	/* Device Hiding Arm */
-#define  PCI_CHSWP_EIM		0x02	/* ENUM# Signal Mask */
-#define  PCI_CHSWP_PIE		0x04	/* Pending Insert or Extract */
-#define  PCI_CHSWP_LOO		0x08	/* LED On / Off */
-#define  PCI_CHSWP_PI		0x30	/* Programming Interface */
-#define  PCI_CHSWP_EXT		0x40	/* ENUM# status - extraction */
-#define  PCI_CHSWP_INS		0x80	/* ENUM# status - insertion */
-
-/* PCI Advanced Feature registers */
-
-#define PCI_AF_LENGTH		2
-#define PCI_AF_CAP		3
-#define  PCI_AF_CAP_TP		0x01
-#define  PCI_AF_CAP_FLR		0x02
-#define PCI_AF_CTRL		4
-#define  PCI_AF_CTRL_FLR	0x01
-#define PCI_AF_STATUS		5
-#define  PCI_AF_STATUS_TP	0x01
-
-/* PCI-X registers */
-
-#define PCI_X_CMD		2	/* Modes & Features */
-#define  PCI_X_CMD_DPERR_E	0x0001	/* Data Parity Error Recovery Enable */
-#define  PCI_X_CMD_ERO		0x0002	/* Enable Relaxed Ordering */
-#define  PCI_X_CMD_READ_512	0x0000	/* 512 byte maximum read byte count */
-#define  PCI_X_CMD_READ_1K	0x0004	/* 1Kbyte maximum read byte count */
-#define  PCI_X_CMD_READ_2K	0x0008	/* 2Kbyte maximum read byte count */
-#define  PCI_X_CMD_READ_4K	0x000c	/* 4Kbyte maximum read byte count */
-#define  PCI_X_CMD_MAX_READ	0x000c	/* Max Memory Read Byte Count */
-				/* Max # of outstanding split transactions */
-#define  PCI_X_CMD_SPLIT_1	0x0000	/* Max 1 */
-#define  PCI_X_CMD_SPLIT_2	0x0010	/* Max 2 */
-#define  PCI_X_CMD_SPLIT_3	0x0020	/* Max 3 */
-#define  PCI_X_CMD_SPLIT_4	0x0030	/* Max 4 */
-#define  PCI_X_CMD_SPLIT_8	0x0040	/* Max 8 */
-#define  PCI_X_CMD_SPLIT_12	0x0050	/* Max 12 */
-#define  PCI_X_CMD_SPLIT_16	0x0060	/* Max 16 */
-#define  PCI_X_CMD_SPLIT_32	0x0070	/* Max 32 */
-#define  PCI_X_CMD_MAX_SPLIT	0x0070	/* Max Outstanding Split Transactions */
-#define  PCI_X_CMD_VERSION(x) 	(((x) >> 12) & 3) /* Version */
-#define PCI_X_STATUS		4	/* PCI-X capabilities */
-#define  PCI_X_STATUS_DEVFN	0x000000ff	/* A copy of devfn */
-#define  PCI_X_STATUS_BUS	0x0000ff00	/* A copy of bus nr */
-#define  PCI_X_STATUS_64BIT	0x00010000	/* 64-bit device */
-#define  PCI_X_STATUS_133MHZ	0x00020000	/* 133 MHz capable */
-#define  PCI_X_STATUS_SPL_DISC	0x00040000	/* Split Completion Discarded */
-#define  PCI_X_STATUS_UNX_SPL	0x00080000	/* Unexpected Split Completion */
-#define  PCI_X_STATUS_COMPLEX	0x00100000	/* Device Complexity */
-#define  PCI_X_STATUS_MAX_READ	0x00600000	/* Designed Max Memory Read Count */
-#define  PCI_X_STATUS_MAX_SPLIT	0x03800000	/* Designed Max Outstanding Split Transactions */
-#define  PCI_X_STATUS_MAX_CUM	0x1c000000	/* Designed Max Cumulative Read Size */
-#define  PCI_X_STATUS_SPL_ERR	0x20000000	/* Rcvd Split Completion Error Msg */
-#define  PCI_X_STATUS_266MHZ	0x40000000	/* 266 MHz capable */
-#define  PCI_X_STATUS_533MHZ	0x80000000	/* 533 MHz capable */
-
-/* PCI Bridge Subsystem ID registers */
-
-#define PCI_SSVID_VENDOR_ID     4	/* PCI-Bridge subsystem vendor id register */
-#define PCI_SSVID_DEVICE_ID     6	/* PCI-Bridge subsystem device id register */
-
-/* PCI Express capability registers */
-
-#define PCI_EXP_FLAGS		2	/* Capabilities register */
-#define PCI_EXP_FLAGS_VERS	0x000f	/* Capability version */
-#define PCI_EXP_FLAGS_TYPE	0x00f0	/* Device/Port type */
-#define  PCI_EXP_TYPE_ENDPOINT	0x0	/* Express Endpoint */
-#define  PCI_EXP_TYPE_LEG_END	0x1	/* Legacy Endpoint */
-#define  PCI_EXP_TYPE_ROOT_PORT 0x4	/* Root Port */
-#define  PCI_EXP_TYPE_UPSTREAM	0x5	/* Upstream Port */
-#define  PCI_EXP_TYPE_DOWNSTREAM 0x6	/* Downstream Port */
-#define  PCI_EXP_TYPE_PCI_BRIDGE 0x7	/* PCI/PCI-X Bridge */
-#define  PCI_EXP_TYPE_PCIE_BRIDGE 0x8	/* PCI/PCI-X to PCIE Bridge */
-#define  PCI_EXP_TYPE_RC_END	0x9	/* Root Complex Integrated Endpoint */
-#define  PCI_EXP_TYPE_RC_EC	0xa	/* Root Complex Event Collector */
-#define PCI_EXP_FLAGS_SLOT	0x0100	/* Slot implemented */
-#define PCI_EXP_FLAGS_IRQ	0x3e00	/* Interrupt message number */
-#define PCI_EXP_DEVCAP		4	/* Device capabilities */
-#define  PCI_EXP_DEVCAP_PAYLOAD	0x07	/* Max_Payload_Size */
-#define  PCI_EXP_DEVCAP_PHANTOM	0x18	/* Phantom functions */
-#define  PCI_EXP_DEVCAP_EXT_TAG	0x20	/* Extended tags */
-#define  PCI_EXP_DEVCAP_L0S	0x1c0	/* L0s Acceptable Latency */
-#define  PCI_EXP_DEVCAP_L1	0xe00	/* L1 Acceptable Latency */
-#define  PCI_EXP_DEVCAP_ATN_BUT	0x1000	/* Attention Button Present */
-#define  PCI_EXP_DEVCAP_ATN_IND	0x2000	/* Attention Indicator Present */
-#define  PCI_EXP_DEVCAP_PWR_IND	0x4000	/* Power Indicator Present */
-#define  PCI_EXP_DEVCAP_RBER	0x8000	/* Role-Based Error Reporting */
-#define  PCI_EXP_DEVCAP_PWR_VAL	0x3fc0000 /* Slot Power Limit Value */
-#define  PCI_EXP_DEVCAP_PWR_SCL	0xc000000 /* Slot Power Limit Scale */
-#define  PCI_EXP_DEVCAP_FLR     0x10000000 /* Function Level Reset */
-#define PCI_EXP_DEVCTL		8	/* Device Control */
-#define  PCI_EXP_DEVCTL_CERE	0x0001	/* Correctable Error Reporting En. */
-#define  PCI_EXP_DEVCTL_NFERE	0x0002	/* Non-Fatal Error Reporting Enable */
-#define  PCI_EXP_DEVCTL_FERE	0x0004	/* Fatal Error Reporting Enable */
-#define  PCI_EXP_DEVCTL_URRE	0x0008	/* Unsupported Request Reporting En. */
-#define  PCI_EXP_DEVCTL_RELAX_EN 0x0010 /* Enable relaxed ordering */
-#define  PCI_EXP_DEVCTL_PAYLOAD	0x00e0	/* Max_Payload_Size */
-#define  PCI_EXP_DEVCTL_EXT_TAG	0x0100	/* Extended Tag Field Enable */
-#define  PCI_EXP_DEVCTL_PHANTOM	0x0200	/* Phantom Functions Enable */
-#define  PCI_EXP_DEVCTL_AUX_PME	0x0400	/* Auxiliary Power PM Enable */
-#define  PCI_EXP_DEVCTL_NOSNOOP_EN 0x0800  /* Enable No Snoop */
-#define  PCI_EXP_DEVCTL_READRQ	0x7000	/* Max_Read_Request_Size */
-#define  PCI_EXP_DEVCTL_BCR_FLR 0x8000  /* Bridge Configuration Retry / FLR */
-#define PCI_EXP_DEVSTA		10	/* Device Status */
-#define  PCI_EXP_DEVSTA_CED	0x01	/* Correctable Error Detected */
-#define  PCI_EXP_DEVSTA_NFED	0x02	/* Non-Fatal Error Detected */
-#define  PCI_EXP_DEVSTA_FED	0x04	/* Fatal Error Detected */
-#define  PCI_EXP_DEVSTA_URD	0x08	/* Unsupported Request Detected */
-#define  PCI_EXP_DEVSTA_AUXPD	0x10	/* AUX Power Detected */
-#define  PCI_EXP_DEVSTA_TRPND	0x20	/* Transactions Pending */
-#define PCI_EXP_LNKCAP		12	/* Link Capabilities */
-#define  PCI_EXP_LNKCAP_SLS	0x0000000f /* Supported Link Speeds */
-#define  PCI_EXP_LNKCAP_MLW	0x000003f0 /* Maximum Link Width */
-#define  PCI_EXP_LNKCAP_ASPMS	0x00000c00 /* ASPM Support */
-#define  PCI_EXP_LNKCAP_L0SEL	0x00007000 /* L0s Exit Latency */
-#define  PCI_EXP_LNKCAP_L1EL	0x00038000 /* L1 Exit Latency */
-#define  PCI_EXP_LNKCAP_CLKPM	0x00040000 /* L1 Clock Power Management */
-#define  PCI_EXP_LNKCAP_SDERC	0x00080000 /* Surprise Down Error Reporting Capable */
-#define  PCI_EXP_LNKCAP_DLLLARC	0x00100000 /* Data Link Layer Link Active Reporting Capable */
-#define  PCI_EXP_LNKCAP_LBNC	0x00200000 /* Link Bandwidth Notification Capability */
-#define  PCI_EXP_LNKCAP_PN	0xff000000 /* Port Number */
-#define PCI_EXP_LNKCTL		16	/* Link Control */
-#define  PCI_EXP_LNKCTL_ASPMC	0x0003	/* ASPM Control */
-#define  PCI_EXP_LNKCTL_RCB	0x0008	/* Read Completion Boundary */
-#define  PCI_EXP_LNKCTL_LD	0x0010	/* Link Disable */
-#define  PCI_EXP_LNKCTL_RL	0x0020	/* Retrain Link */
-#define  PCI_EXP_LNKCTL_CCC	0x0040	/* Common Clock Configuration */
-#define  PCI_EXP_LNKCTL_ES	0x0080	/* Extended Synch */
-#define  PCI_EXP_LNKCTL_CLKREQ_EN 0x100	/* Enable clkreq */
-#define  PCI_EXP_LNKCTL_HAWD	0x0200	/* Hardware Autonomous Width Disable */
-#define  PCI_EXP_LNKCTL_LBMIE	0x0400	/* Link Bandwidth Management Interrupt Enable */
-#define  PCI_EXP_LNKCTL_LABIE	0x0800	/* Lnk Autonomous Bandwidth Interrupt Enable */
-#define PCI_EXP_LNKSTA		18	/* Link Status */
-#define  PCI_EXP_LNKSTA_CLS	0x000f	/* Current Link Speed */
-#define  PCI_EXP_LNKSTA_CLS_2_5GB 0x01	/* Current Link Speed 2.5GT/s */
-#define  PCI_EXP_LNKSTA_CLS_5_0GB 0x02	/* Current Link Speed 5.0GT/s */
-#define  PCI_EXP_LNKSTA_NLW	0x03f0	/* Nogotiated Link Width */
-#define  PCI_EXP_LNKSTA_NLW_SHIFT 4	/* start of NLW mask in link status */
-#define  PCI_EXP_LNKSTA_LT	0x0800	/* Link Training */
-#define  PCI_EXP_LNKSTA_SLC	0x1000	/* Slot Clock Configuration */
-#define  PCI_EXP_LNKSTA_DLLLA	0x2000	/* Data Link Layer Link Active */
-#define  PCI_EXP_LNKSTA_LBMS	0x4000	/* Link Bandwidth Management Status */
-#define  PCI_EXP_LNKSTA_LABS	0x8000	/* Link Autonomous Bandwidth Status */
-#define PCI_EXP_SLTCAP		20	/* Slot Capabilities */
-#define  PCI_EXP_SLTCAP_ABP	0x00000001 /* Attention Button Present */
-#define  PCI_EXP_SLTCAP_PCP	0x00000002 /* Power Controller Present */
-#define  PCI_EXP_SLTCAP_MRLSP	0x00000004 /* MRL Sensor Present */
-#define  PCI_EXP_SLTCAP_AIP	0x00000008 /* Attention Indicator Present */
-#define  PCI_EXP_SLTCAP_PIP	0x00000010 /* Power Indicator Present */
-#define  PCI_EXP_SLTCAP_HPS	0x00000020 /* Hot-Plug Surprise */
-#define  PCI_EXP_SLTCAP_HPC	0x00000040 /* Hot-Plug Capable */
-#define  PCI_EXP_SLTCAP_SPLV	0x00007f80 /* Slot Power Limit Value */
-#define  PCI_EXP_SLTCAP_SPLS	0x00018000 /* Slot Power Limit Scale */
-#define  PCI_EXP_SLTCAP_EIP	0x00020000 /* Electromechanical Interlock Present */
-#define  PCI_EXP_SLTCAP_NCCS	0x00040000 /* No Command Completed Support */
-#define  PCI_EXP_SLTCAP_PSN	0xfff80000 /* Physical Slot Number */
-#define PCI_EXP_SLTCTL		24	/* Slot Control */
-#define  PCI_EXP_SLTCTL_ABPE	0x0001	/* Attention Button Pressed Enable */
-#define  PCI_EXP_SLTCTL_PFDE	0x0002	/* Power Fault Detected Enable */
-#define  PCI_EXP_SLTCTL_MRLSCE	0x0004	/* MRL Sensor Changed Enable */
-#define  PCI_EXP_SLTCTL_PDCE	0x0008	/* Presence Detect Changed Enable */
-#define  PCI_EXP_SLTCTL_CCIE	0x0010	/* Command Completed Interrupt Enable */
-#define  PCI_EXP_SLTCTL_HPIE	0x0020	/* Hot-Plug Interrupt Enable */
-#define  PCI_EXP_SLTCTL_AIC	0x00c0	/* Attention Indicator Control */
-#define  PCI_EXP_SLTCTL_PIC	0x0300	/* Power Indicator Control */
-#define  PCI_EXP_SLTCTL_PCC	0x0400	/* Power Controller Control */
-#define  PCI_EXP_SLTCTL_EIC	0x0800	/* Electromechanical Interlock Control */
-#define  PCI_EXP_SLTCTL_DLLSCE	0x1000	/* Data Link Layer State Changed Enable */
-#define PCI_EXP_SLTSTA		26	/* Slot Status */
-#define  PCI_EXP_SLTSTA_ABP	0x0001	/* Attention Button Pressed */
-#define  PCI_EXP_SLTSTA_PFD	0x0002	/* Power Fault Detected */
-#define  PCI_EXP_SLTSTA_MRLSC	0x0004	/* MRL Sensor Changed */
-#define  PCI_EXP_SLTSTA_PDC	0x0008	/* Presence Detect Changed */
-#define  PCI_EXP_SLTSTA_CC	0x0010	/* Command Completed */
-#define  PCI_EXP_SLTSTA_MRLSS	0x0020	/* MRL Sensor State */
-#define  PCI_EXP_SLTSTA_PDS	0x0040	/* Presence Detect State */
-#define  PCI_EXP_SLTSTA_EIS	0x0080	/* Electromechanical Interlock Status */
-#define  PCI_EXP_SLTSTA_DLLSC	0x0100	/* Data Link Layer State Changed */
-#define PCI_EXP_RTCTL		28	/* Root Control */
-#define  PCI_EXP_RTCTL_SECEE	0x01	/* System Error on Correctable Error */
-#define  PCI_EXP_RTCTL_SENFEE	0x02	/* System Error on Non-Fatal Error */
-#define  PCI_EXP_RTCTL_SEFEE	0x04	/* System Error on Fatal Error */
-#define  PCI_EXP_RTCTL_PMEIE	0x08	/* PME Interrupt Enable */
-#define  PCI_EXP_RTCTL_CRSSVE	0x10	/* CRS Software Visibility Enable */
-#define PCI_EXP_RTCAP		30	/* Root Capabilities */
-#define PCI_EXP_RTSTA		32	/* Root Status */
-#define PCI_EXP_RTSTA_PME	0x10000 /* PME status */
-#define PCI_EXP_RTSTA_PENDING	0x20000 /* PME pending */
-#define PCI_EXP_DEVCAP2		36	/* Device Capabilities 2 */
-#define  PCI_EXP_DEVCAP2_ARI	0x20	/* Alternative Routing-ID */
-#define  PCI_EXP_DEVCAP2_LTR	0x800	/* Latency tolerance reporting */
-#define  PCI_EXP_OBFF_MASK	0xc0000 /* OBFF support mechanism */
-#define  PCI_EXP_OBFF_MSG	0x40000 /* New message signaling */
-#define  PCI_EXP_OBFF_WAKE	0x80000 /* Re-use WAKE# for OBFF */
-#define PCI_EXP_DEVCTL2		40	/* Device Control 2 */
-#define  PCI_EXP_DEVCTL2_ARI	0x20	/* Alternative Routing-ID */
-#define  PCI_EXP_IDO_REQ_EN	0x100	/* ID-based ordering request enable */
-#define  PCI_EXP_IDO_CMP_EN	0x200	/* ID-based ordering completion enable */
-#define  PCI_EXP_LTR_EN		0x400	/* Latency tolerance reporting */
-#define  PCI_EXP_OBFF_MSGA_EN	0x2000	/* OBFF enable with Message type A */
-#define  PCI_EXP_OBFF_MSGB_EN	0x4000	/* OBFF enable with Message type B */
-#define  PCI_EXP_OBFF_WAKE_EN	0x6000	/* OBFF using WAKE# signaling */
-#define PCI_EXP_LNKCTL2		48	/* Link Control 2 */
-#define PCI_EXP_SLTCTL2		56	/* Slot Control 2 */
-
-/* Extended Capabilities (PCI-X 2.0 and Express) */
-#define PCI_EXT_CAP_ID(header)		(header & 0x0000ffff)
-#define PCI_EXT_CAP_VER(header)		((header >> 16) & 0xf)
-#define PCI_EXT_CAP_NEXT(header)	((header >> 20) & 0xffc)
-
-#define PCI_EXT_CAP_ID_ERR	1
-#define PCI_EXT_CAP_ID_VC	2
-#define PCI_EXT_CAP_ID_DSN	3
-#define PCI_EXT_CAP_ID_PWR	4
-#define PCI_EXT_CAP_ID_VNDR	11
-#define PCI_EXT_CAP_ID_ACS	13
-#define PCI_EXT_CAP_ID_ARI	14
-#define PCI_EXT_CAP_ID_ATS	15
-#define PCI_EXT_CAP_ID_SRIOV	16
-#define PCI_EXT_CAP_ID_PRI	19
-#define PCI_EXT_CAP_ID_LTR	24
-#define PCI_EXT_CAP_ID_PASID	27
-
-/* Advanced Error Reporting */
-#define PCI_ERR_UNCOR_STATUS	4	/* Uncorrectable Error Status */
-#define  PCI_ERR_UNC_TRAIN	0x00000001	/* Training */
-#define  PCI_ERR_UNC_DLP	0x00000010	/* Data Link Protocol */
-#define  PCI_ERR_UNC_POISON_TLP	0x00001000	/* Poisoned TLP */
-#define  PCI_ERR_UNC_FCP	0x00002000	/* Flow Control Protocol */
-#define  PCI_ERR_UNC_COMP_TIME	0x00004000	/* Completion Timeout */
-#define  PCI_ERR_UNC_COMP_ABORT	0x00008000	/* Completer Abort */
-#define  PCI_ERR_UNC_UNX_COMP	0x00010000	/* Unexpected Completion */
-#define  PCI_ERR_UNC_RX_OVER	0x00020000	/* Receiver Overflow */
-#define  PCI_ERR_UNC_MALF_TLP	0x00040000	/* Malformed TLP */
-#define  PCI_ERR_UNC_ECRC	0x00080000	/* ECRC Error Status */
-#define  PCI_ERR_UNC_UNSUP	0x00100000	/* Unsupported Request */
-#define PCI_ERR_UNCOR_MASK	8	/* Uncorrectable Error Mask */
-	/* Same bits as above */
-#define PCI_ERR_UNCOR_SEVER	12	/* Uncorrectable Error Severity */
-	/* Same bits as above */
-#define PCI_ERR_COR_STATUS	16	/* Correctable Error Status */
-#define  PCI_ERR_COR_RCVR	0x00000001	/* Receiver Error Status */
-#define  PCI_ERR_COR_BAD_TLP	0x00000040	/* Bad TLP Status */
-#define  PCI_ERR_COR_BAD_DLLP	0x00000080	/* Bad DLLP Status */
-#define  PCI_ERR_COR_REP_ROLL	0x00000100	/* REPLAY_NUM Rollover */
-#define  PCI_ERR_COR_REP_TIMER	0x00001000	/* Replay Timer Timeout */
-#define PCI_ERR_COR_MASK	20	/* Correctable Error Mask */
-	/* Same bits as above */
-#define PCI_ERR_CAP		24	/* Advanced Error Capabilities */
-#define  PCI_ERR_CAP_FEP(x)	((x) & 31)	/* First Error Pointer */
-#define  PCI_ERR_CAP_ECRC_GENC	0x00000020	/* ECRC Generation Capable */
-#define  PCI_ERR_CAP_ECRC_GENE	0x00000040	/* ECRC Generation Enable */
-#define  PCI_ERR_CAP_ECRC_CHKC	0x00000080	/* ECRC Check Capable */
-#define  PCI_ERR_CAP_ECRC_CHKE	0x00000100	/* ECRC Check Enable */
-#define PCI_ERR_HEADER_LOG	28	/* Header Log Register (16 bytes) */
-#define PCI_ERR_ROOT_COMMAND	44	/* Root Error Command */
-/* Correctable Err Reporting Enable */
-#define PCI_ERR_ROOT_CMD_COR_EN		0x00000001
-/* Non-fatal Err Reporting Enable */
-#define PCI_ERR_ROOT_CMD_NONFATAL_EN	0x00000002
-/* Fatal Err Reporting Enable */
-#define PCI_ERR_ROOT_CMD_FATAL_EN	0x00000004
-#define PCI_ERR_ROOT_STATUS	48
-#define PCI_ERR_ROOT_COR_RCV		0x00000001	/* ERR_COR Received */
-/* Multi ERR_COR Received */
-#define PCI_ERR_ROOT_MULTI_COR_RCV	0x00000002
-/* ERR_FATAL/NONFATAL Recevied */
-#define PCI_ERR_ROOT_UNCOR_RCV		0x00000004
-/* Multi ERR_FATAL/NONFATAL Recevied */
-#define PCI_ERR_ROOT_MULTI_UNCOR_RCV	0x00000008
-#define PCI_ERR_ROOT_FIRST_FATAL	0x00000010	/* First Fatal */
-#define PCI_ERR_ROOT_NONFATAL_RCV	0x00000020	/* Non-Fatal Received */
-#define PCI_ERR_ROOT_FATAL_RCV		0x00000040	/* Fatal Received */
-#define PCI_ERR_ROOT_ERR_SRC	52	/* Error Source Identification */
-
-/* Virtual Channel */
-#define PCI_VC_PORT_REG1	4
-#define PCI_VC_PORT_REG2	8
-#define PCI_VC_PORT_CTRL	12
-#define PCI_VC_PORT_STATUS	14
-#define PCI_VC_RES_CAP		16
-#define PCI_VC_RES_CTRL		20
-#define PCI_VC_RES_STATUS	26
-
-/* Power Budgeting */
-#define PCI_PWR_DSR		4	/* Data Select Register */
-#define PCI_PWR_DATA		8	/* Data Register */
-#define  PCI_PWR_DATA_BASE(x)	((x) & 0xff)	    /* Base Power */
-#define  PCI_PWR_DATA_SCALE(x)	(((x) >> 8) & 3)    /* Data Scale */
-#define  PCI_PWR_DATA_PM_SUB(x)	(((x) >> 10) & 7)   /* PM Sub State */
-#define  PCI_PWR_DATA_PM_STATE(x) (((x) >> 13) & 3) /* PM State */
-#define  PCI_PWR_DATA_TYPE(x)	(((x) >> 15) & 7)   /* Type */
-#define  PCI_PWR_DATA_RAIL(x)	(((x) >> 18) & 7)   /* Power Rail */
-#define PCI_PWR_CAP		12	/* Capability */
-#define  PCI_PWR_CAP_BUDGET(x)	((x) & 1)	/* Included in system budget */
-
-/*
- * Hypertransport sub capability types
- *
- * Unfortunately there are both 3 bit and 5 bit capability types defined
- * in the HT spec, catering for that is a little messy. You probably don't
- * want to use these directly, just use pci_find_ht_capability() and it
- * will do the right thing for you.
- */
-#define HT_3BIT_CAP_MASK	0xE0
-#define HT_CAPTYPE_SLAVE	0x00	/* Slave/Primary link configuration */
-#define HT_CAPTYPE_HOST		0x20	/* Host/Secondary link configuration */
-
-#define HT_5BIT_CAP_MASK	0xF8
-#define HT_CAPTYPE_IRQ		0x80	/* IRQ Configuration */
-#define HT_CAPTYPE_REMAPPING_40	0xA0	/* 40 bit address remapping */
-#define HT_CAPTYPE_REMAPPING_64 0xA2	/* 64 bit address remapping */
-#define HT_CAPTYPE_UNITID_CLUMP	0x90	/* Unit ID clumping */
-#define HT_CAPTYPE_EXTCONF	0x98	/* Extended Configuration Space Access */
-#define HT_CAPTYPE_MSI_MAPPING	0xA8	/* MSI Mapping Capability */
-#define  HT_MSI_FLAGS		0x02		/* Offset to flags */
-#define  HT_MSI_FLAGS_ENABLE	0x1		/* Mapping enable */
-#define  HT_MSI_FLAGS_FIXED	0x2		/* Fixed mapping only */
-#define  HT_MSI_FIXED_ADDR	0x00000000FEE00000ULL	/* Fixed addr */
-#define  HT_MSI_ADDR_LO		0x04		/* Offset to low addr bits */
-#define  HT_MSI_ADDR_LO_MASK	0xFFF00000	/* Low address bit mask */
-#define  HT_MSI_ADDR_HI		0x08		/* Offset to high addr bits */
-#define HT_CAPTYPE_DIRECT_ROUTE	0xB0	/* Direct routing configuration */
-#define HT_CAPTYPE_VCSET	0xB8	/* Virtual Channel configuration */
-#define HT_CAPTYPE_ERROR_RETRY	0xC0	/* Retry on error configuration */
-#define HT_CAPTYPE_GEN3		0xD0	/* Generation 3 hypertransport configuration */
-#define HT_CAPTYPE_PM		0xE0	/* Hypertransport powermanagement configuration */
-
-/* Alternative Routing-ID Interpretation */
-#define PCI_ARI_CAP		0x04	/* ARI Capability Register */
-#define  PCI_ARI_CAP_MFVC	0x0001	/* MFVC Function Groups Capability */
-#define  PCI_ARI_CAP_ACS	0x0002	/* ACS Function Groups Capability */
-#define  PCI_ARI_CAP_NFN(x)	(((x) >> 8) & 0xff) /* Next Function Number */
-#define PCI_ARI_CTRL		0x06	/* ARI Control Register */
-#define  PCI_ARI_CTRL_MFVC	0x0001	/* MFVC Function Groups Enable */
-#define  PCI_ARI_CTRL_ACS	0x0002	/* ACS Function Groups Enable */
-#define  PCI_ARI_CTRL_FG(x)	(((x) >> 4) & 7) /* Function Group */
-
-/* Address Translation Service */
-#define PCI_ATS_CAP		0x04	/* ATS Capability Register */
-#define  PCI_ATS_CAP_QDEP(x)	((x) & 0x1f)	/* Invalidate Queue Depth */
-#define  PCI_ATS_MAX_QDEP	32	/* Max Invalidate Queue Depth */
-#define PCI_ATS_CTRL		0x06	/* ATS Control Register */
-#define  PCI_ATS_CTRL_ENABLE	0x8000	/* ATS Enable */
-#define  PCI_ATS_CTRL_STU(x)	((x) & 0x1f)	/* Smallest Translation Unit */
-#define  PCI_ATS_MIN_STU	12	/* shift of minimum STU block */
-
-/* Page Request Interface */
-#define PCI_PRI_CTRL		0x04	/* PRI control register */
-#define  PCI_PRI_CTRL_ENABLE	0x01	/* Enable */
-#define  PCI_PRI_CTRL_RESET	0x02	/* Reset */
-#define PCI_PRI_STATUS		0x06	/* PRI status register */
-#define  PCI_PRI_STATUS_RF	0x001	/* Response Failure */
-#define  PCI_PRI_STATUS_UPRGI	0x002	/* Unexpected PRG index */
-#define  PCI_PRI_STATUS_STOPPED	0x100	/* PRI Stopped */
-#define PCI_PRI_MAX_REQ		0x08	/* PRI max reqs supported */
-#define PCI_PRI_ALLOC_REQ	0x0c	/* PRI max reqs allowed */
-
-/* PASID capability */
-#define PCI_PASID_CAP		0x04    /* PASID feature register */
-#define  PCI_PASID_CAP_EXEC	0x02	/* Exec permissions Supported */
-#define  PCI_PASID_CAP_PRIV	0x04	/* Priviledge Mode Supported */
-#define PCI_PASID_CTRL		0x06    /* PASID control register */
-#define  PCI_PASID_CTRL_ENABLE	0x01	/* Enable bit */
-#define  PCI_PASID_CTRL_EXEC	0x02	/* Exec permissions Enable */
-#define  PCI_PASID_CTRL_PRIV	0x04	/* Priviledge Mode Enable */
-
-/* Single Root I/O Virtualization */
-#define PCI_SRIOV_CAP		0x04	/* SR-IOV Capabilities */
-#define  PCI_SRIOV_CAP_VFM	0x01	/* VF Migration Capable */
-#define  PCI_SRIOV_CAP_INTR(x)	((x) >> 21) /* Interrupt Message Number */
-#define PCI_SRIOV_CTRL		0x08	/* SR-IOV Control */
-#define  PCI_SRIOV_CTRL_VFE	0x01	/* VF Enable */
-#define  PCI_SRIOV_CTRL_VFM	0x02	/* VF Migration Enable */
-#define  PCI_SRIOV_CTRL_INTR	0x04	/* VF Migration Interrupt Enable */
-#define  PCI_SRIOV_CTRL_MSE	0x08	/* VF Memory Space Enable */
-#define  PCI_SRIOV_CTRL_ARI	0x10	/* ARI Capable Hierarchy */
-#define PCI_SRIOV_STATUS	0x0a	/* SR-IOV Status */
-#define  PCI_SRIOV_STATUS_VFM	0x01	/* VF Migration Status */
-#define PCI_SRIOV_INITIAL_VF	0x0c	/* Initial VFs */
-#define PCI_SRIOV_TOTAL_VF	0x0e	/* Total VFs */
-#define PCI_SRIOV_NUM_VF	0x10	/* Number of VFs */
-#define PCI_SRIOV_FUNC_LINK	0x12	/* Function Dependency Link */
-#define PCI_SRIOV_VF_OFFSET	0x14	/* First VF Offset */
-#define PCI_SRIOV_VF_STRIDE	0x16	/* Following VF Stride */
-#define PCI_SRIOV_VF_DID	0x1a	/* VF Device ID */
-#define PCI_SRIOV_SUP_PGSIZE	0x1c	/* Supported Page Sizes */
-#define PCI_SRIOV_SYS_PGSIZE	0x20	/* System Page Size */
-#define PCI_SRIOV_BAR		0x24	/* VF BAR0 */
-#define  PCI_SRIOV_NUM_BARS	6	/* Number of VF BARs */
-#define PCI_SRIOV_VFM		0x3c	/* VF Migration State Array Offset*/
-#define  PCI_SRIOV_VFM_BIR(x)	((x) & 7)	/* State BIR */
-#define  PCI_SRIOV_VFM_OFFSET(x) ((x) & ~7)	/* State Offset */
-#define  PCI_SRIOV_VFM_UA	0x0	/* Inactive.Unavailable */
-#define  PCI_SRIOV_VFM_MI	0x1	/* Dormant.MigrateIn */
-#define  PCI_SRIOV_VFM_MO	0x2	/* Active.MigrateOut */
-#define  PCI_SRIOV_VFM_AV	0x3	/* Active.Available */
-
-#define PCI_LTR_MAX_SNOOP_LAT	0x4
-#define PCI_LTR_MAX_NOSNOOP_LAT	0x6
-#define  PCI_LTR_VALUE_MASK	0x000003ff
-#define  PCI_LTR_SCALE_MASK	0x00001c00
-#define  PCI_LTR_SCALE_SHIFT	10
-
-/* Access Control Service */
-#define PCI_ACS_CAP		0x04	/* ACS Capability Register */
-#define  PCI_ACS_SV		0x01	/* Source Validation */
-#define  PCI_ACS_TB		0x02	/* Translation Blocking */
-#define  PCI_ACS_RR		0x04	/* P2P Request Redirect */
-#define  PCI_ACS_CR		0x08	/* P2P Completion Redirect */
-#define  PCI_ACS_UF		0x10	/* Upstream Forwarding */
-#define  PCI_ACS_EC		0x20	/* P2P Egress Control */
-#define  PCI_ACS_DT		0x40	/* Direct Translated P2P */
-#define PCI_ACS_CTRL		0x06	/* ACS Control Register */
-#define PCI_ACS_EGRESS_CTL_V	0x08	/* ACS Egress Control Vector */
-
-#endif /* LINUX_PCI_REGS_H */
diff --git a/ANDROID_3.4.5/include/linux/pcieport_if.h b/ANDROID_3.4.5/include/linux/pcieport_if.h
deleted file mode 100644
index 6775532b..00000000
--- a/ANDROID_3.4.5/include/linux/pcieport_if.h
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * File:	pcieport_if.h
- * Purpose:	PCI Express Port Bus Driver's IF Data Structure
- *
- * Copyright (C) 2004 Intel
- * Copyright (C) Tom Long Nguyen (tom.l.nguyen@intel.com)
- */
-
-#ifndef _PCIEPORT_IF_H_
-#define _PCIEPORT_IF_H_
-
-/* Port Type */
-#define PCIE_ANY_PORT			(~0)
-
-/* Service Type */
-#define PCIE_PORT_SERVICE_PME_SHIFT	0	/* Power Management Event */
-#define PCIE_PORT_SERVICE_PME		(1 << PCIE_PORT_SERVICE_PME_SHIFT)
-#define PCIE_PORT_SERVICE_AER_SHIFT	1	/* Advanced Error Reporting */
-#define PCIE_PORT_SERVICE_AER		(1 << PCIE_PORT_SERVICE_AER_SHIFT)
-#define PCIE_PORT_SERVICE_HP_SHIFT	2	/* Native Hotplug */
-#define PCIE_PORT_SERVICE_HP		(1 << PCIE_PORT_SERVICE_HP_SHIFT)
-#define PCIE_PORT_SERVICE_VC_SHIFT	3	/* Virtual Channel */
-#define PCIE_PORT_SERVICE_VC		(1 << PCIE_PORT_SERVICE_VC_SHIFT)
-
-struct pcie_device {
-	int 		irq;	    /* Service IRQ/MSI/MSI-X Vector */
-	struct pci_dev *port;	    /* Root/Upstream/Downstream Port */
-	u32		service;    /* Port service this device represents */
-	void		*priv_data; /* Service Private Data */
-	struct device	device;     /* Generic Device Interface */
-};
-#define to_pcie_device(d) container_of(d, struct pcie_device, device)
-
-static inline void set_service_data(struct pcie_device *dev, void *data)
-{
-	dev->priv_data = data;
-}
-
-static inline void* get_service_data(struct pcie_device *dev)
-{
-	return dev->priv_data;
-}
-
-struct pcie_port_service_driver {
-	const char *name;
-	int (*probe) (struct pcie_device *dev);
-	void (*remove) (struct pcie_device *dev);
-	int (*suspend) (struct pcie_device *dev);
-	int (*resume) (struct pcie_device *dev);
-
-	/* Service Error Recovery Handler */
-	struct pci_error_handlers *err_handler;
-
-	/* Link Reset Capability - AER service driver specific */
-	pci_ers_result_t (*reset_link) (struct pci_dev *dev);
-
-	int port_type;  /* Type of the port this driver can handle */
-	u32 service;    /* Port service this device represents */
-
-	struct device_driver driver;
-};
-#define to_service_driver(d) \
-	container_of(d, struct pcie_port_service_driver, driver)
-
-extern int pcie_port_service_register(struct pcie_port_service_driver *new);
-extern void pcie_port_service_unregister(struct pcie_port_service_driver *new);
-
-#endif /* _PCIEPORT_IF_H_ */
diff --git a/ANDROID_3.4.5/include/linux/pda_power.h b/ANDROID_3.4.5/include/linux/pda_power.h
deleted file mode 100644
index 2bb62bf2..00000000
--- a/ANDROID_3.4.5/include/linux/pda_power.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * Common power driver for PDAs and phones with one or two external
- * power supplies (AC/USB) connected to main and backup batteries,
- * and optional builtin charger.
- *
- * Copyright © 2007 Anton Vorontsov <cbou@mail.ru>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __PDA_POWER_H__
-#define __PDA_POWER_H__
-
-#define PDA_POWER_CHARGE_AC  (1 << 0)
-#define PDA_POWER_CHARGE_USB (1 << 1)
-
-struct device;
-
-struct pda_power_pdata {
-	int (*init)(struct device *dev);
-	int (*is_ac_online)(void);
-	int (*is_usb_online)(void);
-	void (*set_charge)(int flags);
-	void (*exit)(struct device *dev);
-	int (*suspend)(pm_message_t state);
-	int (*resume)(void);
-
-	char **supplied_to;
-	size_t num_supplicants;
-
-	unsigned int wait_for_status; /* msecs, default is 500 */
-	unsigned int wait_for_charger; /* msecs, default is 500 */
-	unsigned int polling_interval; /* msecs, default is 2000 */
-
-	unsigned long ac_max_uA; /* current to draw when on AC */
-
-	bool use_otg_notifier;
-};
-
-#endif /* __PDA_POWER_H__ */
diff --git a/ANDROID_3.4.5/include/linux/percpu-defs.h b/ANDROID_3.4.5/include/linux/percpu-defs.h
deleted file mode 100644
index 27ef6b19..00000000
--- a/ANDROID_3.4.5/include/linux/percpu-defs.h
+++ /dev/null
@@ -1,163 +0,0 @@
-#ifndef _LINUX_PERCPU_DEFS_H
-#define _LINUX_PERCPU_DEFS_H
-
-/*
- * Base implementations of per-CPU variable declarations and definitions, where
- * the section in which the variable is to be placed is provided by the
- * 'sec' argument.  This may be used to affect the parameters governing the
- * variable's storage.
- *
- * NOTE!  The sections for the DECLARE and for the DEFINE must match, lest
- * linkage errors occur due the compiler generating the wrong code to access
- * that section.
- */
-#define __PCPU_ATTRS(sec)						\
-	__percpu __attribute__((section(PER_CPU_BASE_SECTION sec)))	\
-	PER_CPU_ATTRIBUTES
-
-#define __PCPU_DUMMY_ATTRS						\
-	__attribute__((section(".discard"), unused))
-
-/*
- * Macro which verifies @ptr is a percpu pointer without evaluating
- * @ptr.  This is to be used in percpu accessors to verify that the
- * input parameter is a percpu pointer.
- */
-#define __verify_pcpu_ptr(ptr)	do {					\
-	const void __percpu *__vpp_verify = (typeof(ptr))NULL;		\
-	(void)__vpp_verify;						\
-} while (0)
-
-/*
- * s390 and alpha modules require percpu variables to be defined as
- * weak to force the compiler to generate GOT based external
- * references for them.  This is necessary because percpu sections
- * will be located outside of the usually addressable area.
- *
- * This definition puts the following two extra restrictions when
- * defining percpu variables.
- *
- * 1. The symbol must be globally unique, even the static ones.
- * 2. Static percpu variables cannot be defined inside a function.
- *
- * Archs which need weak percpu definitions should define
- * ARCH_NEEDS_WEAK_PER_CPU in asm/percpu.h when necessary.
- *
- * To ensure that the generic code observes the above two
- * restrictions, if CONFIG_DEBUG_FORCE_WEAK_PER_CPU is set weak
- * definition is used for all cases.
- */
-#if defined(ARCH_NEEDS_WEAK_PER_CPU) || defined(CONFIG_DEBUG_FORCE_WEAK_PER_CPU)
-/*
- * __pcpu_scope_* dummy variable is used to enforce scope.  It
- * receives the static modifier when it's used in front of
- * DEFINE_PER_CPU() and will trigger build failure if
- * DECLARE_PER_CPU() is used for the same variable.
- *
- * __pcpu_unique_* dummy variable is used to enforce symbol uniqueness
- * such that hidden weak symbol collision, which will cause unrelated
- * variables to share the same address, can be detected during build.
- */
-#define DECLARE_PER_CPU_SECTION(type, name, sec)			\
-	extern __PCPU_DUMMY_ATTRS char __pcpu_scope_##name;		\
-	extern __PCPU_ATTRS(sec) __typeof__(type) name
-
-#define DEFINE_PER_CPU_SECTION(type, name, sec)				\
-	__PCPU_DUMMY_ATTRS char __pcpu_scope_##name;			\
-	extern __PCPU_DUMMY_ATTRS char __pcpu_unique_##name;		\
-	__PCPU_DUMMY_ATTRS char __pcpu_unique_##name;			\
-	__PCPU_ATTRS(sec) PER_CPU_DEF_ATTRIBUTES __weak			\
-	__typeof__(type) name
-#else
-/*
- * Normal declaration and definition macros.
- */
-#define DECLARE_PER_CPU_SECTION(type, name, sec)			\
-	extern __PCPU_ATTRS(sec) __typeof__(type) name
-
-#define DEFINE_PER_CPU_SECTION(type, name, sec)				\
-	__PCPU_ATTRS(sec) PER_CPU_DEF_ATTRIBUTES			\
-	__typeof__(type) name
-#endif
-
-/*
- * Variant on the per-CPU variable declaration/definition theme used for
- * ordinary per-CPU variables.
- */
-#define DECLARE_PER_CPU(type, name)					\
-	DECLARE_PER_CPU_SECTION(type, name, "")
-
-#define DEFINE_PER_CPU(type, name)					\
-	DEFINE_PER_CPU_SECTION(type, name, "")
-
-/*
- * Declaration/definition used for per-CPU variables that must come first in
- * the set of variables.
- */
-#define DECLARE_PER_CPU_FIRST(type, name)				\
-	DECLARE_PER_CPU_SECTION(type, name, PER_CPU_FIRST_SECTION)
-
-#define DEFINE_PER_CPU_FIRST(type, name)				\
-	DEFINE_PER_CPU_SECTION(type, name, PER_CPU_FIRST_SECTION)
-
-/*
- * Declaration/definition used for per-CPU variables that must be cacheline
- * aligned under SMP conditions so that, whilst a particular instance of the
- * data corresponds to a particular CPU, inefficiencies due to direct access by
- * other CPUs are reduced by preventing the data from unnecessarily spanning
- * cachelines.
- *
- * An example of this would be statistical data, where each CPU's set of data
- * is updated by that CPU alone, but the data from across all CPUs is collated
- * by a CPU processing a read from a proc file.
- */
-#define DECLARE_PER_CPU_SHARED_ALIGNED(type, name)			\
-	DECLARE_PER_CPU_SECTION(type, name, PER_CPU_SHARED_ALIGNED_SECTION) \
-	____cacheline_aligned_in_smp
-
-#define DEFINE_PER_CPU_SHARED_ALIGNED(type, name)			\
-	DEFINE_PER_CPU_SECTION(type, name, PER_CPU_SHARED_ALIGNED_SECTION) \
-	____cacheline_aligned_in_smp
-
-#define DECLARE_PER_CPU_ALIGNED(type, name)				\
-	DECLARE_PER_CPU_SECTION(type, name, PER_CPU_ALIGNED_SECTION)	\
-	____cacheline_aligned
-
-#define DEFINE_PER_CPU_ALIGNED(type, name)				\
-	DEFINE_PER_CPU_SECTION(type, name, PER_CPU_ALIGNED_SECTION)	\
-	____cacheline_aligned
-
-/*
- * Declaration/definition used for per-CPU variables that must be page aligned.
- */
-#define DECLARE_PER_CPU_PAGE_ALIGNED(type, name)			\
-	DECLARE_PER_CPU_SECTION(type, name, "..page_aligned")		\
-	__aligned(PAGE_SIZE)
-
-#define DEFINE_PER_CPU_PAGE_ALIGNED(type, name)				\
-	DEFINE_PER_CPU_SECTION(type, name, "..page_aligned")		\
-	__aligned(PAGE_SIZE)
-
-/*
- * Declaration/definition used for per-CPU variables that must be read mostly.
- */
-#define DECLARE_PER_CPU_READ_MOSTLY(type, name)			\
-	DECLARE_PER_CPU_SECTION(type, name, "..readmostly")
-
-#define DEFINE_PER_CPU_READ_MOSTLY(type, name)				\
-	DEFINE_PER_CPU_SECTION(type, name, "..readmostly")
-
-/*
- * Intermodule exports for per-CPU variables.  sparse forgets about
- * address space across EXPORT_SYMBOL(), change EXPORT_SYMBOL() to
- * noop if __CHECKER__.
- */
-#ifndef __CHECKER__
-#define EXPORT_PER_CPU_SYMBOL(var) EXPORT_SYMBOL(var)
-#define EXPORT_PER_CPU_SYMBOL_GPL(var) EXPORT_SYMBOL_GPL(var)
-#else
-#define EXPORT_PER_CPU_SYMBOL(var)
-#define EXPORT_PER_CPU_SYMBOL_GPL(var)
-#endif
-
-#endif /* _LINUX_PERCPU_DEFS_H */
diff --git a/ANDROID_3.4.5/include/linux/percpu.h b/ANDROID_3.4.5/include/linux/percpu.h
deleted file mode 100644
index 21638ae1..00000000
--- a/ANDROID_3.4.5/include/linux/percpu.h
+++ /dev/null
@@ -1,812 +0,0 @@
-#ifndef __LINUX_PERCPU_H
-#define __LINUX_PERCPU_H
-
-#include <linux/preempt.h>
-#include <linux/smp.h>
-#include <linux/cpumask.h>
-#include <linux/pfn.h>
-#include <linux/init.h>
-
-#include <asm/percpu.h>
-
-/* enough to cover all DEFINE_PER_CPUs in modules */
-#ifdef CONFIG_MODULES
-#define PERCPU_MODULE_RESERVE		(8 << 10)
-#else
-#define PERCPU_MODULE_RESERVE		0
-#endif
-
-#ifndef PERCPU_ENOUGH_ROOM
-#define PERCPU_ENOUGH_ROOM						\
-	(ALIGN(__per_cpu_end - __per_cpu_start, SMP_CACHE_BYTES) +	\
-	 PERCPU_MODULE_RESERVE)
-#endif
-
-/*
- * Must be an lvalue. Since @var must be a simple identifier,
- * we force a syntax error here if it isn't.
- */
-#define get_cpu_var(var) (*({				\
-	preempt_disable();				\
-	&__get_cpu_var(var); }))
-
-/*
- * The weird & is necessary because sparse considers (void)(var) to be
- * a direct dereference of percpu variable (var).
- */
-#define put_cpu_var(var) do {				\
-	(void)&(var);					\
-	preempt_enable();				\
-} while (0)
-
-#define get_cpu_ptr(var) ({				\
-	preempt_disable();				\
-	this_cpu_ptr(var); })
-
-#define put_cpu_ptr(var) do {				\
-	(void)(var);					\
-	preempt_enable();				\
-} while (0)
-
-/* minimum unit size, also is the maximum supported allocation size */
-#define PCPU_MIN_UNIT_SIZE		PFN_ALIGN(32 << 10)
-
-/*
- * Percpu allocator can serve percpu allocations before slab is
- * initialized which allows slab to depend on the percpu allocator.
- * The following two parameters decide how much resource to
- * preallocate for this.  Keep PERCPU_DYNAMIC_RESERVE equal to or
- * larger than PERCPU_DYNAMIC_EARLY_SIZE.
- */
-#define PERCPU_DYNAMIC_EARLY_SLOTS	128
-#define PERCPU_DYNAMIC_EARLY_SIZE	(12 << 10)
-
-/*
- * PERCPU_DYNAMIC_RESERVE indicates the amount of free area to piggy
- * back on the first chunk for dynamic percpu allocation if arch is
- * manually allocating and mapping it for faster access (as a part of
- * large page mapping for example).
- *
- * The following values give between one and two pages of free space
- * after typical minimal boot (2-way SMP, single disk and NIC) with
- * both defconfig and a distro config on x86_64 and 32.  More
- * intelligent way to determine this would be nice.
- */
-#if BITS_PER_LONG > 32
-#define PERCPU_DYNAMIC_RESERVE		(20 << 10)
-#else
-#define PERCPU_DYNAMIC_RESERVE		(12 << 10)
-#endif
-
-extern void *pcpu_base_addr;
-extern const unsigned long *pcpu_unit_offsets;
-
-struct pcpu_group_info {
-	int			nr_units;	/* aligned # of units */
-	unsigned long		base_offset;	/* base address offset */
-	unsigned int		*cpu_map;	/* unit->cpu map, empty
-						 * entries contain NR_CPUS */
-};
-
-struct pcpu_alloc_info {
-	size_t			static_size;
-	size_t			reserved_size;
-	size_t			dyn_size;
-	size_t			unit_size;
-	size_t			atom_size;
-	size_t			alloc_size;
-	size_t			__ai_size;	/* internal, don't use */
-	int			nr_groups;	/* 0 if grouping unnecessary */
-	struct pcpu_group_info	groups[];
-};
-
-enum pcpu_fc {
-	PCPU_FC_AUTO,
-	PCPU_FC_EMBED,
-	PCPU_FC_PAGE,
-
-	PCPU_FC_NR,
-};
-extern const char *pcpu_fc_names[PCPU_FC_NR];
-
-extern enum pcpu_fc pcpu_chosen_fc;
-
-typedef void * (*pcpu_fc_alloc_fn_t)(unsigned int cpu, size_t size,
-				     size_t align);
-typedef void (*pcpu_fc_free_fn_t)(void *ptr, size_t size);
-typedef void (*pcpu_fc_populate_pte_fn_t)(unsigned long addr);
-typedef int (pcpu_fc_cpu_distance_fn_t)(unsigned int from, unsigned int to);
-
-extern struct pcpu_alloc_info * __init pcpu_alloc_alloc_info(int nr_groups,
-							     int nr_units);
-extern void __init pcpu_free_alloc_info(struct pcpu_alloc_info *ai);
-
-extern int __init pcpu_setup_first_chunk(const struct pcpu_alloc_info *ai,
-					 void *base_addr);
-
-#ifdef CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK
-extern int __init pcpu_embed_first_chunk(size_t reserved_size, size_t dyn_size,
-				size_t atom_size,
-				pcpu_fc_cpu_distance_fn_t cpu_distance_fn,
-				pcpu_fc_alloc_fn_t alloc_fn,
-				pcpu_fc_free_fn_t free_fn);
-#endif
-
-#ifdef CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK
-extern int __init pcpu_page_first_chunk(size_t reserved_size,
-				pcpu_fc_alloc_fn_t alloc_fn,
-				pcpu_fc_free_fn_t free_fn,
-				pcpu_fc_populate_pte_fn_t populate_pte_fn);
-#endif
-
-/*
- * Use this to get to a cpu's version of the per-cpu object
- * dynamically allocated. Non-atomic access to the current CPU's
- * version should probably be combined with get_cpu()/put_cpu().
- */
-#ifdef CONFIG_SMP
-#define per_cpu_ptr(ptr, cpu)	SHIFT_PERCPU_PTR((ptr), per_cpu_offset((cpu)))
-#else
-#define per_cpu_ptr(ptr, cpu)	({ (void)(cpu); VERIFY_PERCPU_PTR((ptr)); })
-#endif
-
-extern void __percpu *__alloc_reserved_percpu(size_t size, size_t align);
-extern bool is_kernel_percpu_address(unsigned long addr);
-
-#if !defined(CONFIG_SMP) || !defined(CONFIG_HAVE_SETUP_PER_CPU_AREA)
-extern void __init setup_per_cpu_areas(void);
-#endif
-extern void __init percpu_init_late(void);
-
-extern void __percpu *__alloc_percpu(size_t size, size_t align);
-extern void free_percpu(void __percpu *__pdata);
-extern phys_addr_t per_cpu_ptr_to_phys(void *addr);
-
-#define alloc_percpu(type)	\
-	(typeof(type) __percpu *)__alloc_percpu(sizeof(type), __alignof__(type))
-
-/*
- * Optional methods for optimized non-lvalue per-cpu variable access.
- *
- * @var can be a percpu variable or a field of it and its size should
- * equal char, int or long.  percpu_read() evaluates to a lvalue and
- * all others to void.
- *
- * These operations are guaranteed to be atomic.
- * The generic versions disable interrupts.  Archs are
- * encouraged to implement single-instruction alternatives which don't
- * require protection.
- */
-#ifndef percpu_read
-# define percpu_read(var)						\
-  ({									\
-	typeof(var) *pr_ptr__ = &(var);					\
-	typeof(var) pr_ret__;						\
-	pr_ret__ = get_cpu_var(*pr_ptr__);				\
-	put_cpu_var(*pr_ptr__);						\
-	pr_ret__;							\
-  })
-#endif
-
-#define __percpu_generic_to_op(var, val, op)				\
-do {									\
-	typeof(var) *pgto_ptr__ = &(var);				\
-	get_cpu_var(*pgto_ptr__) op val;				\
-	put_cpu_var(*pgto_ptr__);					\
-} while (0)
-
-#ifndef percpu_write
-# define percpu_write(var, val)		__percpu_generic_to_op(var, (val), =)
-#endif
-
-#ifndef percpu_add
-# define percpu_add(var, val)		__percpu_generic_to_op(var, (val), +=)
-#endif
-
-#ifndef percpu_sub
-# define percpu_sub(var, val)		__percpu_generic_to_op(var, (val), -=)
-#endif
-
-#ifndef percpu_and
-# define percpu_and(var, val)		__percpu_generic_to_op(var, (val), &=)
-#endif
-
-#ifndef percpu_or
-# define percpu_or(var, val)		__percpu_generic_to_op(var, (val), |=)
-#endif
-
-#ifndef percpu_xor
-# define percpu_xor(var, val)		__percpu_generic_to_op(var, (val), ^=)
-#endif
-
-/*
- * Branching function to split up a function into a set of functions that
- * are called for different scalar sizes of the objects handled.
- */
-
-extern void __bad_size_call_parameter(void);
-
-#define __pcpu_size_call_return(stem, variable)				\
-({	typeof(variable) pscr_ret__;					\
-	__verify_pcpu_ptr(&(variable));					\
-	switch(sizeof(variable)) {					\
-	case 1: pscr_ret__ = stem##1(variable);break;			\
-	case 2: pscr_ret__ = stem##2(variable);break;			\
-	case 4: pscr_ret__ = stem##4(variable);break;			\
-	case 8: pscr_ret__ = stem##8(variable);break;			\
-	default:							\
-		__bad_size_call_parameter();break;			\
-	}								\
-	pscr_ret__;							\
-})
-
-#define __pcpu_size_call_return2(stem, variable, ...)			\
-({									\
-	typeof(variable) pscr2_ret__;					\
-	__verify_pcpu_ptr(&(variable));					\
-	switch(sizeof(variable)) {					\
-	case 1: pscr2_ret__ = stem##1(variable, __VA_ARGS__); break;	\
-	case 2: pscr2_ret__ = stem##2(variable, __VA_ARGS__); break;	\
-	case 4: pscr2_ret__ = stem##4(variable, __VA_ARGS__); break;	\
-	case 8: pscr2_ret__ = stem##8(variable, __VA_ARGS__); break;	\
-	default:							\
-		__bad_size_call_parameter(); break;			\
-	}								\
-	pscr2_ret__;							\
-})
-
-/*
- * Special handling for cmpxchg_double.  cmpxchg_double is passed two
- * percpu variables.  The first has to be aligned to a double word
- * boundary and the second has to follow directly thereafter.
- * We enforce this on all architectures even if they don't support
- * a double cmpxchg instruction, since it's a cheap requirement, and it
- * avoids breaking the requirement for architectures with the instruction.
- */
-#define __pcpu_double_call_return_bool(stem, pcp1, pcp2, ...)		\
-({									\
-	bool pdcrb_ret__;						\
-	__verify_pcpu_ptr(&pcp1);					\
-	BUILD_BUG_ON(sizeof(pcp1) != sizeof(pcp2));			\
-	VM_BUG_ON((unsigned long)(&pcp1) % (2 * sizeof(pcp1)));		\
-	VM_BUG_ON((unsigned long)(&pcp2) !=				\
-		  (unsigned long)(&pcp1) + sizeof(pcp1));		\
-	switch(sizeof(pcp1)) {						\
-	case 1: pdcrb_ret__ = stem##1(pcp1, pcp2, __VA_ARGS__); break;	\
-	case 2: pdcrb_ret__ = stem##2(pcp1, pcp2, __VA_ARGS__); break;	\
-	case 4: pdcrb_ret__ = stem##4(pcp1, pcp2, __VA_ARGS__); break;	\
-	case 8: pdcrb_ret__ = stem##8(pcp1, pcp2, __VA_ARGS__); break;	\
-	default:							\
-		__bad_size_call_parameter(); break;			\
-	}								\
-	pdcrb_ret__;							\
-})
-
-#define __pcpu_size_call(stem, variable, ...)				\
-do {									\
-	__verify_pcpu_ptr(&(variable));					\
-	switch(sizeof(variable)) {					\
-		case 1: stem##1(variable, __VA_ARGS__);break;		\
-		case 2: stem##2(variable, __VA_ARGS__);break;		\
-		case 4: stem##4(variable, __VA_ARGS__);break;		\
-		case 8: stem##8(variable, __VA_ARGS__);break;		\
-		default: 						\
-			__bad_size_call_parameter();break;		\
-	}								\
-} while (0)
-
-/*
- * Optimized manipulation for memory allocated through the per cpu
- * allocator or for addresses of per cpu variables.
- *
- * These operation guarantee exclusivity of access for other operations
- * on the *same* processor. The assumption is that per cpu data is only
- * accessed by a single processor instance (the current one).
- *
- * The first group is used for accesses that must be done in a
- * preemption safe way since we know that the context is not preempt
- * safe. Interrupts may occur. If the interrupt modifies the variable
- * too then RMW actions will not be reliable.
- *
- * The arch code can provide optimized functions in two ways:
- *
- * 1. Override the function completely. F.e. define this_cpu_add().
- *    The arch must then ensure that the various scalar format passed
- *    are handled correctly.
- *
- * 2. Provide functions for certain scalar sizes. F.e. provide
- *    this_cpu_add_2() to provide per cpu atomic operations for 2 byte
- *    sized RMW actions. If arch code does not provide operations for
- *    a scalar size then the fallback in the generic code will be
- *    used.
- */
-
-#define _this_cpu_generic_read(pcp)					\
-({	typeof(pcp) ret__;						\
-	preempt_disable();						\
-	ret__ = *this_cpu_ptr(&(pcp));					\
-	preempt_enable();						\
-	ret__;								\
-})
-
-#ifndef this_cpu_read
-# ifndef this_cpu_read_1
-#  define this_cpu_read_1(pcp)	_this_cpu_generic_read(pcp)
-# endif
-# ifndef this_cpu_read_2
-#  define this_cpu_read_2(pcp)	_this_cpu_generic_read(pcp)
-# endif
-# ifndef this_cpu_read_4
-#  define this_cpu_read_4(pcp)	_this_cpu_generic_read(pcp)
-# endif
-# ifndef this_cpu_read_8
-#  define this_cpu_read_8(pcp)	_this_cpu_generic_read(pcp)
-# endif
-# define this_cpu_read(pcp)	__pcpu_size_call_return(this_cpu_read_, (pcp))
-#endif
-
-#define _this_cpu_generic_to_op(pcp, val, op)				\
-do {									\
-	unsigned long flags;						\
-	raw_local_irq_save(flags);					\
-	*__this_cpu_ptr(&(pcp)) op val;					\
-	raw_local_irq_restore(flags);					\
-} while (0)
-
-#ifndef this_cpu_write
-# ifndef this_cpu_write_1
-#  define this_cpu_write_1(pcp, val)	_this_cpu_generic_to_op((pcp), (val), =)
-# endif
-# ifndef this_cpu_write_2
-#  define this_cpu_write_2(pcp, val)	_this_cpu_generic_to_op((pcp), (val), =)
-# endif
-# ifndef this_cpu_write_4
-#  define this_cpu_write_4(pcp, val)	_this_cpu_generic_to_op((pcp), (val), =)
-# endif
-# ifndef this_cpu_write_8
-#  define this_cpu_write_8(pcp, val)	_this_cpu_generic_to_op((pcp), (val), =)
-# endif
-# define this_cpu_write(pcp, val)	__pcpu_size_call(this_cpu_write_, (pcp), (val))
-#endif
-
-#ifndef this_cpu_add
-# ifndef this_cpu_add_1
-#  define this_cpu_add_1(pcp, val)	_this_cpu_generic_to_op((pcp), (val), +=)
-# endif
-# ifndef this_cpu_add_2
-#  define this_cpu_add_2(pcp, val)	_this_cpu_generic_to_op((pcp), (val), +=)
-# endif
-# ifndef this_cpu_add_4
-#  define this_cpu_add_4(pcp, val)	_this_cpu_generic_to_op((pcp), (val), +=)
-# endif
-# ifndef this_cpu_add_8
-#  define this_cpu_add_8(pcp, val)	_this_cpu_generic_to_op((pcp), (val), +=)
-# endif
-# define this_cpu_add(pcp, val)		__pcpu_size_call(this_cpu_add_, (pcp), (val))
-#endif
-
-#ifndef this_cpu_sub
-# define this_cpu_sub(pcp, val)		this_cpu_add((pcp), -(val))
-#endif
-
-#ifndef this_cpu_inc
-# define this_cpu_inc(pcp)		this_cpu_add((pcp), 1)
-#endif
-
-#ifndef this_cpu_dec
-# define this_cpu_dec(pcp)		this_cpu_sub((pcp), 1)
-#endif
-
-#ifndef this_cpu_and
-# ifndef this_cpu_and_1
-#  define this_cpu_and_1(pcp, val)	_this_cpu_generic_to_op((pcp), (val), &=)
-# endif
-# ifndef this_cpu_and_2
-#  define this_cpu_and_2(pcp, val)	_this_cpu_generic_to_op((pcp), (val), &=)
-# endif
-# ifndef this_cpu_and_4
-#  define this_cpu_and_4(pcp, val)	_this_cpu_generic_to_op((pcp), (val), &=)
-# endif
-# ifndef this_cpu_and_8
-#  define this_cpu_and_8(pcp, val)	_this_cpu_generic_to_op((pcp), (val), &=)
-# endif
-# define this_cpu_and(pcp, val)		__pcpu_size_call(this_cpu_and_, (pcp), (val))
-#endif
-
-#ifndef this_cpu_or
-# ifndef this_cpu_or_1
-#  define this_cpu_or_1(pcp, val)	_this_cpu_generic_to_op((pcp), (val), |=)
-# endif
-# ifndef this_cpu_or_2
-#  define this_cpu_or_2(pcp, val)	_this_cpu_generic_to_op((pcp), (val), |=)
-# endif
-# ifndef this_cpu_or_4
-#  define this_cpu_or_4(pcp, val)	_this_cpu_generic_to_op((pcp), (val), |=)
-# endif
-# ifndef this_cpu_or_8
-#  define this_cpu_or_8(pcp, val)	_this_cpu_generic_to_op((pcp), (val), |=)
-# endif
-# define this_cpu_or(pcp, val)		__pcpu_size_call(this_cpu_or_, (pcp), (val))
-#endif
-
-#ifndef this_cpu_xor
-# ifndef this_cpu_xor_1
-#  define this_cpu_xor_1(pcp, val)	_this_cpu_generic_to_op((pcp), (val), ^=)
-# endif
-# ifndef this_cpu_xor_2
-#  define this_cpu_xor_2(pcp, val)	_this_cpu_generic_to_op((pcp), (val), ^=)
-# endif
-# ifndef this_cpu_xor_4
-#  define this_cpu_xor_4(pcp, val)	_this_cpu_generic_to_op((pcp), (val), ^=)
-# endif
-# ifndef this_cpu_xor_8
-#  define this_cpu_xor_8(pcp, val)	_this_cpu_generic_to_op((pcp), (val), ^=)
-# endif
-# define this_cpu_xor(pcp, val)		__pcpu_size_call(this_cpu_or_, (pcp), (val))
-#endif
-
-#define _this_cpu_generic_add_return(pcp, val)				\
-({									\
-	typeof(pcp) ret__;						\
-	unsigned long flags;						\
-	raw_local_irq_save(flags);					\
-	__this_cpu_add(pcp, val);					\
-	ret__ = __this_cpu_read(pcp);					\
-	raw_local_irq_restore(flags);					\
-	ret__;								\
-})
-
-#ifndef this_cpu_add_return
-# ifndef this_cpu_add_return_1
-#  define this_cpu_add_return_1(pcp, val)	_this_cpu_generic_add_return(pcp, val)
-# endif
-# ifndef this_cpu_add_return_2
-#  define this_cpu_add_return_2(pcp, val)	_this_cpu_generic_add_return(pcp, val)
-# endif
-# ifndef this_cpu_add_return_4
-#  define this_cpu_add_return_4(pcp, val)	_this_cpu_generic_add_return(pcp, val)
-# endif
-# ifndef this_cpu_add_return_8
-#  define this_cpu_add_return_8(pcp, val)	_this_cpu_generic_add_return(pcp, val)
-# endif
-# define this_cpu_add_return(pcp, val)	__pcpu_size_call_return2(this_cpu_add_return_, pcp, val)
-#endif
-
-#define this_cpu_sub_return(pcp, val)	this_cpu_add_return(pcp, -(val))
-#define this_cpu_inc_return(pcp)	this_cpu_add_return(pcp, 1)
-#define this_cpu_dec_return(pcp)	this_cpu_add_return(pcp, -1)
-
-#define _this_cpu_generic_xchg(pcp, nval)				\
-({	typeof(pcp) ret__;						\
-	unsigned long flags;						\
-	raw_local_irq_save(flags);					\
-	ret__ = __this_cpu_read(pcp);					\
-	__this_cpu_write(pcp, nval);					\
-	raw_local_irq_restore(flags);					\
-	ret__;								\
-})
-
-#ifndef this_cpu_xchg
-# ifndef this_cpu_xchg_1
-#  define this_cpu_xchg_1(pcp, nval)	_this_cpu_generic_xchg(pcp, nval)
-# endif
-# ifndef this_cpu_xchg_2
-#  define this_cpu_xchg_2(pcp, nval)	_this_cpu_generic_xchg(pcp, nval)
-# endif
-# ifndef this_cpu_xchg_4
-#  define this_cpu_xchg_4(pcp, nval)	_this_cpu_generic_xchg(pcp, nval)
-# endif
-# ifndef this_cpu_xchg_8
-#  define this_cpu_xchg_8(pcp, nval)	_this_cpu_generic_xchg(pcp, nval)
-# endif
-# define this_cpu_xchg(pcp, nval)	\
-	__pcpu_size_call_return2(this_cpu_xchg_, (pcp), nval)
-#endif
-
-#define _this_cpu_generic_cmpxchg(pcp, oval, nval)			\
-({									\
-	typeof(pcp) ret__;						\
-	unsigned long flags;						\
-	raw_local_irq_save(flags);					\
-	ret__ = __this_cpu_read(pcp);					\
-	if (ret__ == (oval))						\
-		__this_cpu_write(pcp, nval);				\
-	raw_local_irq_restore(flags);					\
-	ret__;								\
-})
-
-#ifndef this_cpu_cmpxchg
-# ifndef this_cpu_cmpxchg_1
-#  define this_cpu_cmpxchg_1(pcp, oval, nval)	_this_cpu_generic_cmpxchg(pcp, oval, nval)
-# endif
-# ifndef this_cpu_cmpxchg_2
-#  define this_cpu_cmpxchg_2(pcp, oval, nval)	_this_cpu_generic_cmpxchg(pcp, oval, nval)
-# endif
-# ifndef this_cpu_cmpxchg_4
-#  define this_cpu_cmpxchg_4(pcp, oval, nval)	_this_cpu_generic_cmpxchg(pcp, oval, nval)
-# endif
-# ifndef this_cpu_cmpxchg_8
-#  define this_cpu_cmpxchg_8(pcp, oval, nval)	_this_cpu_generic_cmpxchg(pcp, oval, nval)
-# endif
-# define this_cpu_cmpxchg(pcp, oval, nval)	\
-	__pcpu_size_call_return2(this_cpu_cmpxchg_, pcp, oval, nval)
-#endif
-
-/*
- * cmpxchg_double replaces two adjacent scalars at once.  The first
- * two parameters are per cpu variables which have to be of the same
- * size.  A truth value is returned to indicate success or failure
- * (since a double register result is difficult to handle).  There is
- * very limited hardware support for these operations, so only certain
- * sizes may work.
- */
-#define _this_cpu_generic_cmpxchg_double(pcp1, pcp2, oval1, oval2, nval1, nval2)	\
-({									\
-	int ret__;							\
-	unsigned long flags;						\
-	raw_local_irq_save(flags);					\
-	ret__ = __this_cpu_generic_cmpxchg_double(pcp1, pcp2,		\
-			oval1, oval2, nval1, nval2);			\
-	raw_local_irq_restore(flags);					\
-	ret__;								\
-})
-
-#ifndef this_cpu_cmpxchg_double
-# ifndef this_cpu_cmpxchg_double_1
-#  define this_cpu_cmpxchg_double_1(pcp1, pcp2, oval1, oval2, nval1, nval2)	\
-	_this_cpu_generic_cmpxchg_double(pcp1, pcp2, oval1, oval2, nval1, nval2)
-# endif
-# ifndef this_cpu_cmpxchg_double_2
-#  define this_cpu_cmpxchg_double_2(pcp1, pcp2, oval1, oval2, nval1, nval2)	\
-	_this_cpu_generic_cmpxchg_double(pcp1, pcp2, oval1, oval2, nval1, nval2)
-# endif
-# ifndef this_cpu_cmpxchg_double_4
-#  define this_cpu_cmpxchg_double_4(pcp1, pcp2, oval1, oval2, nval1, nval2)	\
-	_this_cpu_generic_cmpxchg_double(pcp1, pcp2, oval1, oval2, nval1, nval2)
-# endif
-# ifndef this_cpu_cmpxchg_double_8
-#  define this_cpu_cmpxchg_double_8(pcp1, pcp2, oval1, oval2, nval1, nval2)	\
-	_this_cpu_generic_cmpxchg_double(pcp1, pcp2, oval1, oval2, nval1, nval2)
-# endif
-# define this_cpu_cmpxchg_double(pcp1, pcp2, oval1, oval2, nval1, nval2)	\
-	__pcpu_double_call_return_bool(this_cpu_cmpxchg_double_, (pcp1), (pcp2), (oval1), (oval2), (nval1), (nval2))
-#endif
-
-/*
- * Generic percpu operations for context that are safe from preemption/interrupts.
- * Either we do not care about races or the caller has the
- * responsibility of handling preemption/interrupt issues. Arch code can still
- * override these instructions since the arch per cpu code may be more
- * efficient and may actually get race freeness for free (that is the
- * case for x86 for example).
- *
- * If there is no other protection through preempt disable and/or
- * disabling interupts then one of these RMW operations can show unexpected
- * behavior because the execution thread was rescheduled on another processor
- * or an interrupt occurred and the same percpu variable was modified from
- * the interrupt context.
- */
-#ifndef __this_cpu_read
-# ifndef __this_cpu_read_1
-#  define __this_cpu_read_1(pcp)	(*__this_cpu_ptr(&(pcp)))
-# endif
-# ifndef __this_cpu_read_2
-#  define __this_cpu_read_2(pcp)	(*__this_cpu_ptr(&(pcp)))
-# endif
-# ifndef __this_cpu_read_4
-#  define __this_cpu_read_4(pcp)	(*__this_cpu_ptr(&(pcp)))
-# endif
-# ifndef __this_cpu_read_8
-#  define __this_cpu_read_8(pcp)	(*__this_cpu_ptr(&(pcp)))
-# endif
-# define __this_cpu_read(pcp)	__pcpu_size_call_return(__this_cpu_read_, (pcp))
-#endif
-
-#define __this_cpu_generic_to_op(pcp, val, op)				\
-do {									\
-	*__this_cpu_ptr(&(pcp)) op val;					\
-} while (0)
-
-#ifndef __this_cpu_write
-# ifndef __this_cpu_write_1
-#  define __this_cpu_write_1(pcp, val)	__this_cpu_generic_to_op((pcp), (val), =)
-# endif
-# ifndef __this_cpu_write_2
-#  define __this_cpu_write_2(pcp, val)	__this_cpu_generic_to_op((pcp), (val), =)
-# endif
-# ifndef __this_cpu_write_4
-#  define __this_cpu_write_4(pcp, val)	__this_cpu_generic_to_op((pcp), (val), =)
-# endif
-# ifndef __this_cpu_write_8
-#  define __this_cpu_write_8(pcp, val)	__this_cpu_generic_to_op((pcp), (val), =)
-# endif
-# define __this_cpu_write(pcp, val)	__pcpu_size_call(__this_cpu_write_, (pcp), (val))
-#endif
-
-#ifndef __this_cpu_add
-# ifndef __this_cpu_add_1
-#  define __this_cpu_add_1(pcp, val)	__this_cpu_generic_to_op((pcp), (val), +=)
-# endif
-# ifndef __this_cpu_add_2
-#  define __this_cpu_add_2(pcp, val)	__this_cpu_generic_to_op((pcp), (val), +=)
-# endif
-# ifndef __this_cpu_add_4
-#  define __this_cpu_add_4(pcp, val)	__this_cpu_generic_to_op((pcp), (val), +=)
-# endif
-# ifndef __this_cpu_add_8
-#  define __this_cpu_add_8(pcp, val)	__this_cpu_generic_to_op((pcp), (val), +=)
-# endif
-# define __this_cpu_add(pcp, val)	__pcpu_size_call(__this_cpu_add_, (pcp), (val))
-#endif
-
-#ifndef __this_cpu_sub
-# define __this_cpu_sub(pcp, val)	__this_cpu_add((pcp), -(val))
-#endif
-
-#ifndef __this_cpu_inc
-# define __this_cpu_inc(pcp)		__this_cpu_add((pcp), 1)
-#endif
-
-#ifndef __this_cpu_dec
-# define __this_cpu_dec(pcp)		__this_cpu_sub((pcp), 1)
-#endif
-
-#ifndef __this_cpu_and
-# ifndef __this_cpu_and_1
-#  define __this_cpu_and_1(pcp, val)	__this_cpu_generic_to_op((pcp), (val), &=)
-# endif
-# ifndef __this_cpu_and_2
-#  define __this_cpu_and_2(pcp, val)	__this_cpu_generic_to_op((pcp), (val), &=)
-# endif
-# ifndef __this_cpu_and_4
-#  define __this_cpu_and_4(pcp, val)	__this_cpu_generic_to_op((pcp), (val), &=)
-# endif
-# ifndef __this_cpu_and_8
-#  define __this_cpu_and_8(pcp, val)	__this_cpu_generic_to_op((pcp), (val), &=)
-# endif
-# define __this_cpu_and(pcp, val)	__pcpu_size_call(__this_cpu_and_, (pcp), (val))
-#endif
-
-#ifndef __this_cpu_or
-# ifndef __this_cpu_or_1
-#  define __this_cpu_or_1(pcp, val)	__this_cpu_generic_to_op((pcp), (val), |=)
-# endif
-# ifndef __this_cpu_or_2
-#  define __this_cpu_or_2(pcp, val)	__this_cpu_generic_to_op((pcp), (val), |=)
-# endif
-# ifndef __this_cpu_or_4
-#  define __this_cpu_or_4(pcp, val)	__this_cpu_generic_to_op((pcp), (val), |=)
-# endif
-# ifndef __this_cpu_or_8
-#  define __this_cpu_or_8(pcp, val)	__this_cpu_generic_to_op((pcp), (val), |=)
-# endif
-# define __this_cpu_or(pcp, val)	__pcpu_size_call(__this_cpu_or_, (pcp), (val))
-#endif
-
-#ifndef __this_cpu_xor
-# ifndef __this_cpu_xor_1
-#  define __this_cpu_xor_1(pcp, val)	__this_cpu_generic_to_op((pcp), (val), ^=)
-# endif
-# ifndef __this_cpu_xor_2
-#  define __this_cpu_xor_2(pcp, val)	__this_cpu_generic_to_op((pcp), (val), ^=)
-# endif
-# ifndef __this_cpu_xor_4
-#  define __this_cpu_xor_4(pcp, val)	__this_cpu_generic_to_op((pcp), (val), ^=)
-# endif
-# ifndef __this_cpu_xor_8
-#  define __this_cpu_xor_8(pcp, val)	__this_cpu_generic_to_op((pcp), (val), ^=)
-# endif
-# define __this_cpu_xor(pcp, val)	__pcpu_size_call(__this_cpu_xor_, (pcp), (val))
-#endif
-
-#define __this_cpu_generic_add_return(pcp, val)				\
-({									\
-	__this_cpu_add(pcp, val);					\
-	__this_cpu_read(pcp);						\
-})
-
-#ifndef __this_cpu_add_return
-# ifndef __this_cpu_add_return_1
-#  define __this_cpu_add_return_1(pcp, val)	__this_cpu_generic_add_return(pcp, val)
-# endif
-# ifndef __this_cpu_add_return_2
-#  define __this_cpu_add_return_2(pcp, val)	__this_cpu_generic_add_return(pcp, val)
-# endif
-# ifndef __this_cpu_add_return_4
-#  define __this_cpu_add_return_4(pcp, val)	__this_cpu_generic_add_return(pcp, val)
-# endif
-# ifndef __this_cpu_add_return_8
-#  define __this_cpu_add_return_8(pcp, val)	__this_cpu_generic_add_return(pcp, val)
-# endif
-# define __this_cpu_add_return(pcp, val)	\
-	__pcpu_size_call_return2(__this_cpu_add_return_, pcp, val)
-#endif
-
-#define __this_cpu_sub_return(pcp, val)	__this_cpu_add_return(pcp, -(val))
-#define __this_cpu_inc_return(pcp)	__this_cpu_add_return(pcp, 1)
-#define __this_cpu_dec_return(pcp)	__this_cpu_add_return(pcp, -1)
-
-#define __this_cpu_generic_xchg(pcp, nval)				\
-({	typeof(pcp) ret__;						\
-	ret__ = __this_cpu_read(pcp);					\
-	__this_cpu_write(pcp, nval);					\
-	ret__;								\
-})
-
-#ifndef __this_cpu_xchg
-# ifndef __this_cpu_xchg_1
-#  define __this_cpu_xchg_1(pcp, nval)	__this_cpu_generic_xchg(pcp, nval)
-# endif
-# ifndef __this_cpu_xchg_2
-#  define __this_cpu_xchg_2(pcp, nval)	__this_cpu_generic_xchg(pcp, nval)
-# endif
-# ifndef __this_cpu_xchg_4
-#  define __this_cpu_xchg_4(pcp, nval)	__this_cpu_generic_xchg(pcp, nval)
-# endif
-# ifndef __this_cpu_xchg_8
-#  define __this_cpu_xchg_8(pcp, nval)	__this_cpu_generic_xchg(pcp, nval)
-# endif
-# define __this_cpu_xchg(pcp, nval)	\
-	__pcpu_size_call_return2(__this_cpu_xchg_, (pcp), nval)
-#endif
-
-#define __this_cpu_generic_cmpxchg(pcp, oval, nval)			\
-({									\
-	typeof(pcp) ret__;						\
-	ret__ = __this_cpu_read(pcp);					\
-	if (ret__ == (oval))						\
-		__this_cpu_write(pcp, nval);				\
-	ret__;								\
-})
-
-#ifndef __this_cpu_cmpxchg
-# ifndef __this_cpu_cmpxchg_1
-#  define __this_cpu_cmpxchg_1(pcp, oval, nval)	__this_cpu_generic_cmpxchg(pcp, oval, nval)
-# endif
-# ifndef __this_cpu_cmpxchg_2
-#  define __this_cpu_cmpxchg_2(pcp, oval, nval)	__this_cpu_generic_cmpxchg(pcp, oval, nval)
-# endif
-# ifndef __this_cpu_cmpxchg_4
-#  define __this_cpu_cmpxchg_4(pcp, oval, nval)	__this_cpu_generic_cmpxchg(pcp, oval, nval)
-# endif
-# ifndef __this_cpu_cmpxchg_8
-#  define __this_cpu_cmpxchg_8(pcp, oval, nval)	__this_cpu_generic_cmpxchg(pcp, oval, nval)
-# endif
-# define __this_cpu_cmpxchg(pcp, oval, nval)	\
-	__pcpu_size_call_return2(__this_cpu_cmpxchg_, pcp, oval, nval)
-#endif
-
-#define __this_cpu_generic_cmpxchg_double(pcp1, pcp2, oval1, oval2, nval1, nval2)	\
-({									\
-	int __ret = 0;							\
-	if (__this_cpu_read(pcp1) == (oval1) &&				\
-			 __this_cpu_read(pcp2)  == (oval2)) {		\
-		__this_cpu_write(pcp1, (nval1));			\
-		__this_cpu_write(pcp2, (nval2));			\
-		__ret = 1;						\
-	}								\
-	(__ret);							\
-})
-
-#ifndef __this_cpu_cmpxchg_double
-# ifndef __this_cpu_cmpxchg_double_1
-#  define __this_cpu_cmpxchg_double_1(pcp1, pcp2, oval1, oval2, nval1, nval2)	\
-	__this_cpu_generic_cmpxchg_double(pcp1, pcp2, oval1, oval2, nval1, nval2)
-# endif
-# ifndef __this_cpu_cmpxchg_double_2
-#  define __this_cpu_cmpxchg_double_2(pcp1, pcp2, oval1, oval2, nval1, nval2)	\
-	__this_cpu_generic_cmpxchg_double(pcp1, pcp2, oval1, oval2, nval1, nval2)
-# endif
-# ifndef __this_cpu_cmpxchg_double_4
-#  define __this_cpu_cmpxchg_double_4(pcp1, pcp2, oval1, oval2, nval1, nval2)	\
-	__this_cpu_generic_cmpxchg_double(pcp1, pcp2, oval1, oval2, nval1, nval2)
-# endif
-# ifndef __this_cpu_cmpxchg_double_8
-#  define __this_cpu_cmpxchg_double_8(pcp1, pcp2, oval1, oval2, nval1, nval2)	\
-	__this_cpu_generic_cmpxchg_double(pcp1, pcp2, oval1, oval2, nval1, nval2)
-# endif
-# define __this_cpu_cmpxchg_double(pcp1, pcp2, oval1, oval2, nval1, nval2)	\
-	__pcpu_double_call_return_bool(__this_cpu_cmpxchg_double_, (pcp1), (pcp2), (oval1), (oval2), (nval1), (nval2))
-#endif
-
-#endif /* __LINUX_PERCPU_H */
diff --git a/ANDROID_3.4.5/include/linux/percpu_counter.h b/ANDROID_3.4.5/include/linux/percpu_counter.h
deleted file mode 100644
index b9df9ed1..00000000
--- a/ANDROID_3.4.5/include/linux/percpu_counter.h
+++ /dev/null
@@ -1,177 +0,0 @@
-#ifndef _LINUX_PERCPU_COUNTER_H
-#define _LINUX_PERCPU_COUNTER_H
-/*
- * A simple "approximate counter" for use in ext2 and ext3 superblocks.
- *
- * WARNING: these things are HUGE.  4 kbytes per counter on 32-way P4.
- */
-
-#include <linux/spinlock.h>
-#include <linux/smp.h>
-#include <linux/list.h>
-#include <linux/threads.h>
-#include <linux/percpu.h>
-#include <linux/types.h>
-
-#ifdef CONFIG_SMP
-
-struct percpu_counter {
-	raw_spinlock_t lock;
-	s64 count;
-#ifdef CONFIG_HOTPLUG_CPU
-	struct list_head list;	/* All percpu_counters are on a list */
-#endif
-	s32 __percpu *counters;
-};
-
-extern int percpu_counter_batch;
-
-int __percpu_counter_init(struct percpu_counter *fbc, s64 amount,
-			  struct lock_class_key *key);
-
-#define percpu_counter_init(fbc, value)					\
-	({								\
-		static struct lock_class_key __key;			\
-									\
-		__percpu_counter_init(fbc, value, &__key);		\
-	})
-
-void percpu_counter_destroy(struct percpu_counter *fbc);
-void percpu_counter_set(struct percpu_counter *fbc, s64 amount);
-void __percpu_counter_add(struct percpu_counter *fbc, s64 amount, s32 batch);
-s64 __percpu_counter_sum(struct percpu_counter *fbc);
-int percpu_counter_compare(struct percpu_counter *fbc, s64 rhs);
-
-static inline void percpu_counter_add(struct percpu_counter *fbc, s64 amount)
-{
-	__percpu_counter_add(fbc, amount, percpu_counter_batch);
-}
-
-static inline s64 percpu_counter_sum_positive(struct percpu_counter *fbc)
-{
-	s64 ret = __percpu_counter_sum(fbc);
-	return ret < 0 ? 0 : ret;
-}
-
-static inline s64 percpu_counter_sum(struct percpu_counter *fbc)
-{
-	return __percpu_counter_sum(fbc);
-}
-
-static inline s64 percpu_counter_read(struct percpu_counter *fbc)
-{
-	return fbc->count;
-}
-
-/*
- * It is possible for the percpu_counter_read() to return a small negative
- * number for some counter which should never be negative.
- *
- */
-static inline s64 percpu_counter_read_positive(struct percpu_counter *fbc)
-{
-	s64 ret = fbc->count;
-
-	barrier();		/* Prevent reloads of fbc->count */
-	if (ret >= 0)
-		return ret;
-	return 0;
-}
-
-static inline int percpu_counter_initialized(struct percpu_counter *fbc)
-{
-	return (fbc->counters != NULL);
-}
-
-#else
-
-struct percpu_counter {
-	s64 count;
-};
-
-static inline int percpu_counter_init(struct percpu_counter *fbc, s64 amount)
-{
-	fbc->count = amount;
-	return 0;
-}
-
-static inline void percpu_counter_destroy(struct percpu_counter *fbc)
-{
-}
-
-static inline void percpu_counter_set(struct percpu_counter *fbc, s64 amount)
-{
-	fbc->count = amount;
-}
-
-static inline int percpu_counter_compare(struct percpu_counter *fbc, s64 rhs)
-{
-	if (fbc->count > rhs)
-		return 1;
-	else if (fbc->count < rhs)
-		return -1;
-	else
-		return 0;
-}
-
-static inline void
-percpu_counter_add(struct percpu_counter *fbc, s64 amount)
-{
-	preempt_disable();
-	fbc->count += amount;
-	preempt_enable();
-}
-
-static inline void
-__percpu_counter_add(struct percpu_counter *fbc, s64 amount, s32 batch)
-{
-	percpu_counter_add(fbc, amount);
-}
-
-static inline s64 percpu_counter_read(struct percpu_counter *fbc)
-{
-	return fbc->count;
-}
-
-/*
- * percpu_counter is intended to track positive numbers. In the UP case the
- * number should never be negative.
- */
-static inline s64 percpu_counter_read_positive(struct percpu_counter *fbc)
-{
-	return fbc->count;
-}
-
-static inline s64 percpu_counter_sum_positive(struct percpu_counter *fbc)
-{
-	return percpu_counter_read_positive(fbc);
-}
-
-static inline s64 percpu_counter_sum(struct percpu_counter *fbc)
-{
-	return percpu_counter_read(fbc);
-}
-
-static inline int percpu_counter_initialized(struct percpu_counter *fbc)
-{
-	return 1;
-}
-
-#endif	/* CONFIG_SMP */
-
-static inline void percpu_counter_inc(struct percpu_counter *fbc)
-{
-	percpu_counter_add(fbc, 1);
-}
-
-static inline void percpu_counter_dec(struct percpu_counter *fbc)
-{
-	percpu_counter_add(fbc, -1);
-}
-
-static inline void percpu_counter_sub(struct percpu_counter *fbc, s64 amount)
-{
-	percpu_counter_add(fbc, -amount);
-}
-
-#endif /* _LINUX_PERCPU_COUNTER_H */
diff --git a/ANDROID_3.4.5/include/linux/perf_event.h b/ANDROID_3.4.5/include/linux/perf_event.h
deleted file mode 100644
index ddbb6a90..00000000
--- a/ANDROID_3.4.5/include/linux/perf_event.h
+++ /dev/null
@@ -1,1365 +0,0 @@
-/*
- * Performance events:
- *
- *    Copyright (C) 2008-2009, Thomas Gleixner <tglx@linutronix.de>
- *    Copyright (C) 2008-2011, Red Hat, Inc., Ingo Molnar
- *    Copyright (C) 2008-2011, Red Hat, Inc., Peter Zijlstra
- *
- * Data type definitions, declarations, prototypes.
- *
- *    Started by: Thomas Gleixner and Ingo Molnar
- *
- * For licencing details see kernel-base/COPYING
- */
-#ifndef _LINUX_PERF_EVENT_H
-#define _LINUX_PERF_EVENT_H
-
-#include <linux/types.h>
-#include <linux/ioctl.h>
-#include <asm/byteorder.h>
-
-/*
- * User-space ABI bits:
- */
-
-/*
- * attr.type
- */
-enum perf_type_id {
-	PERF_TYPE_HARDWARE			= 0,
-	PERF_TYPE_SOFTWARE			= 1,
-	PERF_TYPE_TRACEPOINT			= 2,
-	PERF_TYPE_HW_CACHE			= 3,
-	PERF_TYPE_RAW				= 4,
-	PERF_TYPE_BREAKPOINT			= 5,
-
-	PERF_TYPE_MAX,				/* non-ABI */
-};
-
-/*
- * Generalized performance event event_id types, used by the
- * attr.event_id parameter of the sys_perf_event_open()
- * syscall:
- */
-enum perf_hw_id {
-	/*
-	 * Common hardware events, generalized by the kernel:
-	 */
-	PERF_COUNT_HW_CPU_CYCLES		= 0,
-	PERF_COUNT_HW_INSTRUCTIONS		= 1,
-	PERF_COUNT_HW_CACHE_REFERENCES		= 2,
-	PERF_COUNT_HW_CACHE_MISSES		= 3,
-	PERF_COUNT_HW_BRANCH_INSTRUCTIONS	= 4,
-	PERF_COUNT_HW_BRANCH_MISSES		= 5,
-	PERF_COUNT_HW_BUS_CYCLES		= 6,
-	PERF_COUNT_HW_STALLED_CYCLES_FRONTEND	= 7,
-	PERF_COUNT_HW_STALLED_CYCLES_BACKEND	= 8,
-	PERF_COUNT_HW_REF_CPU_CYCLES		= 9,
-
-	PERF_COUNT_HW_MAX,			/* non-ABI */
-};
-
-/*
- * Generalized hardware cache events:
- *
- *       { L1-D, L1-I, LLC, ITLB, DTLB, BPU, NODE } x
- *       { read, write, prefetch } x
- *       { accesses, misses }
- */
-enum perf_hw_cache_id {
-	PERF_COUNT_HW_CACHE_L1D			= 0,
-	PERF_COUNT_HW_CACHE_L1I			= 1,
-	PERF_COUNT_HW_CACHE_LL			= 2,
-	PERF_COUNT_HW_CACHE_DTLB		= 3,
-	PERF_COUNT_HW_CACHE_ITLB		= 4,
-	PERF_COUNT_HW_CACHE_BPU			= 5,
-	PERF_COUNT_HW_CACHE_NODE		= 6,
-
-	PERF_COUNT_HW_CACHE_MAX,		/* non-ABI */
-};
-
-enum perf_hw_cache_op_id {
-	PERF_COUNT_HW_CACHE_OP_READ		= 0,
-	PERF_COUNT_HW_CACHE_OP_WRITE		= 1,
-	PERF_COUNT_HW_CACHE_OP_PREFETCH		= 2,
-
-	PERF_COUNT_HW_CACHE_OP_MAX,		/* non-ABI */
-};
-
-enum perf_hw_cache_op_result_id {
-	PERF_COUNT_HW_CACHE_RESULT_ACCESS	= 0,
-	PERF_COUNT_HW_CACHE_RESULT_MISS		= 1,
-
-	PERF_COUNT_HW_CACHE_RESULT_MAX,		/* non-ABI */
-};
-
-/*
- * Special "software" events provided by the kernel, even if the hardware
- * does not support performance events. These events measure various
- * physical and sw events of the kernel (and allow the profiling of them as
- * well):
- */
-enum perf_sw_ids {
-	PERF_COUNT_SW_CPU_CLOCK			= 0,
-	PERF_COUNT_SW_TASK_CLOCK		= 1,
-	PERF_COUNT_SW_PAGE_FAULTS		= 2,
-	PERF_COUNT_SW_CONTEXT_SWITCHES		= 3,
-	PERF_COUNT_SW_CPU_MIGRATIONS		= 4,
-	PERF_COUNT_SW_PAGE_FAULTS_MIN		= 5,
-	PERF_COUNT_SW_PAGE_FAULTS_MAJ		= 6,
-	PERF_COUNT_SW_ALIGNMENT_FAULTS		= 7,
-	PERF_COUNT_SW_EMULATION_FAULTS		= 8,
-
-	PERF_COUNT_SW_MAX,			/* non-ABI */
-};
-
-/*
- * Bits that can be set in attr.sample_type to request information
- * in the overflow packets.
- */
-enum perf_event_sample_format {
-	PERF_SAMPLE_IP				= 1U << 0,
-	PERF_SAMPLE_TID				= 1U << 1,
-	PERF_SAMPLE_TIME			= 1U << 2,
-	PERF_SAMPLE_ADDR			= 1U << 3,
-	PERF_SAMPLE_READ			= 1U << 4,
-	PERF_SAMPLE_CALLCHAIN			= 1U << 5,
-	PERF_SAMPLE_ID				= 1U << 6,
-	PERF_SAMPLE_CPU				= 1U << 7,
-	PERF_SAMPLE_PERIOD			= 1U << 8,
-	PERF_SAMPLE_STREAM_ID			= 1U << 9,
-	PERF_SAMPLE_RAW				= 1U << 10,
-	PERF_SAMPLE_BRANCH_STACK		= 1U << 11,
-
-	PERF_SAMPLE_MAX = 1U << 12,		/* non-ABI */
-};
-
-/*
- * values to program into branch_sample_type when PERF_SAMPLE_BRANCH is set
- *
- * If the user does not pass priv level information via branch_sample_type,
- * the kernel uses the event's priv level. Branch and event priv levels do
- * not have to match. Branch priv level is checked for permissions.
- *
- * The branch types can be combined, however BRANCH_ANY covers all types
- * of branches and therefore it supersedes all the other types.
- */
-enum perf_branch_sample_type {
-	PERF_SAMPLE_BRANCH_USER		= 1U << 0, /* user branches */
-	PERF_SAMPLE_BRANCH_KERNEL	= 1U << 1, /* kernel branches */
-	PERF_SAMPLE_BRANCH_HV		= 1U << 2, /* hypervisor branches */
-
-	PERF_SAMPLE_BRANCH_ANY		= 1U << 3, /* any branch types */
-	PERF_SAMPLE_BRANCH_ANY_CALL	= 1U << 4, /* any call branch */
-	PERF_SAMPLE_BRANCH_ANY_RETURN	= 1U << 5, /* any return branch */
-	PERF_SAMPLE_BRANCH_IND_CALL	= 1U << 6, /* indirect calls */
-
-	PERF_SAMPLE_BRANCH_MAX		= 1U << 7, /* non-ABI */
-};
-
-#define PERF_SAMPLE_BRANCH_PLM_ALL \
-	(PERF_SAMPLE_BRANCH_USER|\
-	 PERF_SAMPLE_BRANCH_KERNEL|\
-	 PERF_SAMPLE_BRANCH_HV)
-
-/*
- * The format of the data returned by read() on a perf event fd,
- * as specified by attr.read_format:
- *
- * struct read_format {
- *	{ u64		value;
- *	  { u64		time_enabled; } && PERF_FORMAT_TOTAL_TIME_ENABLED
- *	  { u64		time_running; } && PERF_FORMAT_TOTAL_TIME_RUNNING
- *	  { u64		id;           } && PERF_FORMAT_ID
- *	} && !PERF_FORMAT_GROUP
- *
- *	{ u64		nr;
- *	  { u64		time_enabled; } && PERF_FORMAT_TOTAL_TIME_ENABLED
- *	  { u64		time_running; } && PERF_FORMAT_TOTAL_TIME_RUNNING
- *	  { u64		value;
- *	    { u64	id;           } && PERF_FORMAT_ID
- *	  }		cntr[nr];
- *	} && PERF_FORMAT_GROUP
- * };
- */
-enum perf_event_read_format {
-	PERF_FORMAT_TOTAL_TIME_ENABLED		= 1U << 0,
-	PERF_FORMAT_TOTAL_TIME_RUNNING		= 1U << 1,
-	PERF_FORMAT_ID				= 1U << 2,
-	PERF_FORMAT_GROUP			= 1U << 3,
-
-	PERF_FORMAT_MAX = 1U << 4,		/* non-ABI */
-};
-
-#define PERF_ATTR_SIZE_VER0	64	/* sizeof first published struct */
-#define PERF_ATTR_SIZE_VER1	72	/* add: config2 */
-#define PERF_ATTR_SIZE_VER2	80	/* add: branch_sample_type */
-
-/*
- * Hardware event_id to monitor via a performance monitoring event:
- */
-struct perf_event_attr {
-
-	/*
-	 * Major type: hardware/software/tracepoint/etc.
-	 */
-	__u32			type;
-
-	/*
-	 * Size of the attr structure, for fwd/bwd compat.
-	 */
-	__u32			size;
-
-	/*
-	 * Type specific configuration information.
-	 */
-	__u64			config;
-
-	union {
-		__u64		sample_period;
-		__u64		sample_freq;
-	};
-
-	__u64			sample_type;
-	__u64			read_format;
-
-	__u64			disabled       :  1, /* off by default        */
-				inherit	       :  1, /* children inherit it   */
-				pinned	       :  1, /* must always be on PMU */
-				exclusive      :  1, /* only group on PMU     */
-				exclude_user   :  1, /* don't count user      */
-				exclude_kernel :  1, /* ditto kernel          */
-				exclude_hv     :  1, /* ditto hypervisor      */
-				exclude_idle   :  1, /* don't count when idle */
-				mmap           :  1, /* include mmap data     */
-				comm	       :  1, /* include comm data     */
-				freq           :  1, /* use freq, not period  */
-				inherit_stat   :  1, /* per task counts       */
-				enable_on_exec :  1, /* next exec enables     */
-				task           :  1, /* trace fork/exit       */
-				watermark      :  1, /* wakeup_watermark      */
-				/*
-				 * precise_ip:
-				 *
-				 *  0 - SAMPLE_IP can have arbitrary skid
-				 *  1 - SAMPLE_IP must have constant skid
-				 *  2 - SAMPLE_IP requested to have 0 skid
-				 *  3 - SAMPLE_IP must have 0 skid
-				 *
-				 *  See also PERF_RECORD_MISC_EXACT_IP
-				 */
-				precise_ip     :  2, /* skid constraint       */
-				mmap_data      :  1, /* non-exec mmap data    */
-				sample_id_all  :  1, /* sample_type all events */
-
-				exclude_host   :  1, /* don't count in host   */
-				exclude_guest  :  1, /* don't count in guest  */
-
-				__reserved_1   : 43;
-
-	union {
-		__u32		wakeup_events;	  /* wakeup every n events */
-		__u32		wakeup_watermark; /* bytes before wakeup   */
-	};
-
-	__u32			bp_type;
-	union {
-		__u64		bp_addr;
-		__u64		config1; /* extension of config */
-	};
-	union {
-		__u64		bp_len;
-		__u64		config2; /* extension of config1 */
-	};
-	__u64	branch_sample_type; /* enum branch_sample_type */
-};
-
-/*
- * Ioctls that can be done on a perf event fd:
- */
-#define PERF_EVENT_IOC_ENABLE		_IO ('$', 0)
-#define PERF_EVENT_IOC_DISABLE		_IO ('$', 1)
-#define PERF_EVENT_IOC_REFRESH		_IO ('$', 2)
-#define PERF_EVENT_IOC_RESET		_IO ('$', 3)
-#define PERF_EVENT_IOC_PERIOD		_IOW('$', 4, __u64)
-#define PERF_EVENT_IOC_SET_OUTPUT	_IO ('$', 5)
-#define PERF_EVENT_IOC_SET_FILTER	_IOW('$', 6, char *)
-
-enum perf_event_ioc_flags {
-	PERF_IOC_FLAG_GROUP		= 1U << 0,
-};
-
-/*
- * Structure of the page that can be mapped via mmap
- */
-struct perf_event_mmap_page {
-	__u32	version;		/* version number of this structure */
-	__u32	compat_version;		/* lowest version this is compat with */
-
-	/*
-	 * Bits needed to read the hw events in user-space.
-	 *
-	 *   u32 seq, time_mult, time_shift, idx, width;
-	 *   u64 count, enabled, running;
-	 *   u64 cyc, time_offset;
-	 *   s64 pmc = 0;
-	 *
-	 *   do {
-	 *     seq = pc->lock;
-	 *     barrier()
-	 *
-	 *     enabled = pc->time_enabled;
-	 *     running = pc->time_running;
-	 *
-	 *     if (pc->cap_usr_time && enabled != running) {
-	 *       cyc = rdtsc();
-	 *       time_offset = pc->time_offset;
-	 *       time_mult   = pc->time_mult;
-	 *       time_shift  = pc->time_shift;
-	 *     }
-	 *
-	 *     idx = pc->index;
-	 *     count = pc->offset;
-	 *     if (pc->cap_usr_rdpmc && idx) {
-	 *       width = pc->pmc_width;
-	 *       pmc = rdpmc(idx - 1);
-	 *     }
-	 *
-	 *     barrier();
-	 *   } while (pc->lock != seq);
-	 *
-	 * NOTE: for obvious reason this only works on self-monitoring
-	 *       processes.
-	 */
-	__u32	lock;			/* seqlock for synchronization */
-	__u32	index;			/* hardware event identifier */
-	__s64	offset;			/* add to hardware event value */
-	__u64	time_enabled;		/* time event active */
-	__u64	time_running;		/* time event on cpu */
-	union {
-		__u64	capabilities;
-		__u64	cap_usr_time  : 1,
-			cap_usr_rdpmc : 1,
-			cap_____res   : 62;
-	};
-
-	/*
-	 * If cap_usr_rdpmc this field provides the bit-width of the value
-	 * read using the rdpmc() or equivalent instruction. This can be used
-	 * to sign extend the result like:
-	 *
-	 *   pmc <<= 64 - width;
-	 *   pmc >>= 64 - width; // signed shift right
-	 *   count += pmc;
-	 */
-	__u16	pmc_width;
-
-	/*
-	 * If cap_usr_time the below fields can be used to compute the time
-	 * delta since time_enabled (in ns) using rdtsc or similar.
-	 *
-	 *   u64 quot, rem;
-	 *   u64 delta;
-	 *
-	 *   quot = (cyc >> time_shift);
-	 *   rem = cyc & ((1 << time_shift) - 1);
-	 *   delta = time_offset + quot * time_mult +
-	 *              ((rem * time_mult) >> time_shift);
-	 *
-	 * Where time_offset,time_mult,time_shift and cyc are read in the
-	 * seqcount loop described above. This delta can then be added to
-	 * enabled and possible running (if idx), improving the scaling:
-	 *
-	 *   enabled += delta;
-	 *   if (idx)
-	 *     running += delta;
-	 *
-	 *   quot = count / running;
-	 *   rem  = count % running;
-	 *   count = quot * enabled + (rem * enabled) / running;
-	 */
-	__u16	time_shift;
-	__u32	time_mult;
-	__u64	time_offset;
-
-		/*
-		 * Hole for extension of the self monitor capabilities
-		 */
-
-	__u64	__reserved[120];	/* align to 1k */
-
-	/*
-	 * Control data for the mmap() data buffer.
-	 *
-	 * User-space reading the @data_head value should issue an rmb(), on
-	 * SMP capable platforms, after reading this value -- see
-	 * perf_event_wakeup().
-	 *
-	 * When the mapping is PROT_WRITE the @data_tail value should be
-	 * written by userspace to reflect the last read data. In this case
-	 * the kernel will not over-write unread data.
-	 */
-	__u64   data_head;		/* head in the data section */
-	__u64	data_tail;		/* user-space written tail */
-};
-
-#define PERF_RECORD_MISC_CPUMODE_MASK		(7 << 0)
-#define PERF_RECORD_MISC_CPUMODE_UNKNOWN	(0 << 0)
-#define PERF_RECORD_MISC_KERNEL			(1 << 0)
-#define PERF_RECORD_MISC_USER			(2 << 0)
-#define PERF_RECORD_MISC_HYPERVISOR		(3 << 0)
-#define PERF_RECORD_MISC_GUEST_KERNEL		(4 << 0)
-#define PERF_RECORD_MISC_GUEST_USER		(5 << 0)
-
-/*
- * Indicates that the content of PERF_SAMPLE_IP points to
- * the actual instruction that triggered the event. See also
- * perf_event_attr::precise_ip.
- */
-#define PERF_RECORD_MISC_EXACT_IP		(1 << 14)
-/*
- * Reserve the last bit to indicate some extended misc field
- */
-#define PERF_RECORD_MISC_EXT_RESERVED		(1 << 15)
-
-struct perf_event_header {
-	__u32	type;
-	__u16	misc;
-	__u16	size;
-};
-
-enum perf_event_type {
-
-	/*
-	 * If perf_event_attr.sample_id_all is set then all event types will
-	 * have the sample_type selected fields related to where/when
-	 * (identity) an event took place (TID, TIME, ID, CPU, STREAM_ID)
-	 * described in PERF_RECORD_SAMPLE below, it will be stashed just after
-	 * the perf_event_header and the fields already present for the existing
-	 * fields, i.e. at the end of the payload. That way a newer perf.data
-	 * file will be supported by older perf tools, with these new optional
-	 * fields being ignored.
-	 *
-	 * The MMAP events record the PROT_EXEC mappings so that we can
-	 * correlate userspace IPs to code. They have the following structure:
-	 *
-	 * struct {
-	 *	struct perf_event_header	header;
-	 *
-	 *	u32				pid, tid;
-	 *	u64				addr;
-	 *	u64				len;
-	 *	u64				pgoff;
-	 *	char				filename[];
-	 * };
-	 */
-	PERF_RECORD_MMAP			= 1,
-
-	/*
-	 * struct {
-	 *	struct perf_event_header	header;
-	 *	u64				id;
-	 *	u64				lost;
-	 * };
-	 */
-	PERF_RECORD_LOST			= 2,
-
-	/*
-	 * struct {
-	 *	struct perf_event_header	header;
-	 *
-	 *	u32				pid, tid;
-	 *	char				comm[];
-	 * };
-	 */
-	PERF_RECORD_COMM			= 3,
-
-	/*
-	 * struct {
-	 *	struct perf_event_header	header;
-	 *	u32				pid, ppid;
-	 *	u32				tid, ptid;
-	 *	u64				time;
-	 * };
-	 */
-	PERF_RECORD_EXIT			= 4,
-
-	/*
-	 * struct {
-	 *	struct perf_event_header	header;
-	 *	u64				time;
-	 *	u64				id;
-	 *	u64				stream_id;
-	 * };
-	 */
-	PERF_RECORD_THROTTLE			= 5,
-	PERF_RECORD_UNTHROTTLE			= 6,
-
-	/*
-	 * struct {
-	 *	struct perf_event_header	header;
-	 *	u32				pid, ppid;
-	 *	u32				tid, ptid;
-	 *	u64				time;
-	 * };
-	 */
-	PERF_RECORD_FORK			= 7,
-
-	/*
-	 * struct {
-	 *	struct perf_event_header	header;
-	 *	u32				pid, tid;
-	 *
-	 *	struct read_format		values;
-	 * };
-	 */
-	PERF_RECORD_READ			= 8,
-
-	/*
-	 * struct {
-	 *	struct perf_event_header	header;
-	 *
-	 *	{ u64			ip;	  } && PERF_SAMPLE_IP
-	 *	{ u32			pid, tid; } && PERF_SAMPLE_TID
-	 *	{ u64			time;     } && PERF_SAMPLE_TIME
-	 *	{ u64			addr;     } && PERF_SAMPLE_ADDR
-	 *	{ u64			id;	  } && PERF_SAMPLE_ID
-	 *	{ u64			stream_id;} && PERF_SAMPLE_STREAM_ID
-	 *	{ u32			cpu, res; } && PERF_SAMPLE_CPU
-	 *	{ u64			period;   } && PERF_SAMPLE_PERIOD
-	 *
-	 *	{ struct read_format	values;	  } && PERF_SAMPLE_READ
-	 *
-	 *	{ u64			nr,
-	 *	  u64			ips[nr];  } && PERF_SAMPLE_CALLCHAIN
-	 *
-	 *	#
-	 *	# The RAW record below is opaque data wrt the ABI
-	 *	#
-	 *	# That is, the ABI doesn't make any promises wrt to
-	 *	# the stability of its content, it may vary depending
-	 *	# on event, hardware, kernel version and phase of
-	 *	# the moon.
-	 *	#
-	 *	# In other words, PERF_SAMPLE_RAW contents are not an ABI.
-	 *	#
-	 *
-	 *	{ u32			size;
-	 *	  char                  data[size];}&& PERF_SAMPLE_RAW
-	 *
-	 *	{ u64 from, to, flags } lbr[nr];} && PERF_SAMPLE_BRANCH_STACK
-	 * };
-	 */
-	PERF_RECORD_SAMPLE			= 9,
-
-	PERF_RECORD_MAX,			/* non-ABI */
-};
-
-enum perf_callchain_context {
-	PERF_CONTEXT_HV			= (__u64)-32,
-	PERF_CONTEXT_KERNEL		= (__u64)-128,
-	PERF_CONTEXT_USER		= (__u64)-512,
-
-	PERF_CONTEXT_GUEST		= (__u64)-2048,
-	PERF_CONTEXT_GUEST_KERNEL	= (__u64)-2176,
-	PERF_CONTEXT_GUEST_USER		= (__u64)-2560,
-
-	PERF_CONTEXT_MAX		= (__u64)-4095,
-};
-
-#define PERF_FLAG_FD_NO_GROUP		(1U << 0)
-#define PERF_FLAG_FD_OUTPUT		(1U << 1)
-#define PERF_FLAG_PID_CGROUP		(1U << 2) /* pid=cgroup id, per-cpu mode only */
-
-#ifdef __KERNEL__
-/*
- * Kernel-internal data types and definitions:
- */
-
-#ifdef CONFIG_PERF_EVENTS
-# include <linux/cgroup.h>
-# include <asm/perf_event.h>
-# include <asm/local64.h>
-#endif
-
-struct perf_guest_info_callbacks {
-	int				(*is_in_guest)(void);
-	int				(*is_user_mode)(void);
-	unsigned long			(*get_guest_ip)(void);
-};
-
-#ifdef CONFIG_HAVE_HW_BREAKPOINT
-#include <asm/hw_breakpoint.h>
-#endif
-
-#include <linux/list.h>
-#include <linux/mutex.h>
-#include <linux/rculist.h>
-#include <linux/rcupdate.h>
-#include <linux/spinlock.h>
-#include <linux/hrtimer.h>
-#include <linux/fs.h>
-#include <linux/pid_namespace.h>
-#include <linux/workqueue.h>
-#include <linux/ftrace.h>
-#include <linux/cpu.h>
-#include <linux/irq_work.h>
-#include <linux/static_key.h>
-#include <linux/atomic.h>
-#include <linux/sysfs.h>
-#include <asm/local.h>
-
-#define PERF_MAX_STACK_DEPTH		255
-
-struct perf_callchain_entry {
-	__u64				nr;
-	__u64				ip[PERF_MAX_STACK_DEPTH];
-};
-
-struct perf_raw_record {
-	u32				size;
-	void				*data;
-};
-
-/*
- * single taken branch record layout:
- *
- *      from: source instruction (may not always be a branch insn)
- *        to: branch target
- *   mispred: branch target was mispredicted
- * predicted: branch target was predicted
- *
- * support for mispred, predicted is optional. In case it
- * is not supported mispred = predicted = 0.
- */
-struct perf_branch_entry {
-	__u64	from;
-	__u64	to;
-	__u64	mispred:1,  /* target mispredicted */
-		predicted:1,/* target predicted */
-		reserved:62;
-};
-
-/*
- * branch stack layout:
- *  nr: number of taken branches stored in entries[]
- *
- * Note that nr can vary from sample to sample
- * branches (to, from) are stored from most recent
- * to least recent, i.e., entries[0] contains the most
- * recent branch.
- */
-struct perf_branch_stack {
-	__u64				nr;
-	struct perf_branch_entry	entries[0];
-};
-
-struct task_struct;
-
-/*
- * extra PMU register associated with an event
- */
-struct hw_perf_event_extra {
-	u64		config;	/* register value */
-	unsigned int	reg;	/* register address or index */
-	int		alloc;	/* extra register already allocated */
-	int		idx;	/* index in shared_regs->regs[] */
-};
-
-/**
- * struct hw_perf_event - performance event hardware details:
- */
-struct hw_perf_event {
-#ifdef CONFIG_PERF_EVENTS
-	union {
-		struct { /* hardware */
-			u64		config;
-			u64		last_tag;
-			unsigned long	config_base;
-			unsigned long	event_base;
-			int		idx;
-			int		last_cpu;
-
-			struct hw_perf_event_extra extra_reg;
-			struct hw_perf_event_extra branch_reg;
-		};
-		struct { /* software */
-			struct hrtimer	hrtimer;
-		};
-#ifdef CONFIG_HAVE_HW_BREAKPOINT
-		struct { /* breakpoint */
-			struct arch_hw_breakpoint	info;
-			struct list_head		bp_list;
-			/*
-			 * Crufty hack to avoid the chicken and egg
-			 * problem hw_breakpoint has with context
-			 * creation and event initalization.
-			 */
-			struct task_struct		*bp_target;
-		};
-#endif
-	};
-	int				state;
-	local64_t			prev_count;
-	u64				sample_period;
-	u64				last_period;
-	local64_t			period_left;
-	u64                             interrupts_seq;
-	u64				interrupts;
-
-	u64				freq_time_stamp;
-	u64				freq_count_stamp;
-#endif
-};
-
-/*
- * hw_perf_event::state flags
- */
-#define PERF_HES_STOPPED	0x01 /* the counter is stopped */
-#define PERF_HES_UPTODATE	0x02 /* event->count up-to-date */
-#define PERF_HES_ARCH		0x04
-
-struct perf_event;
-
-/*
- * Common implementation detail of pmu::{start,commit,cancel}_txn
- */
-#define PERF_EVENT_TXN 0x1
-
-/**
- * struct pmu - generic performance monitoring unit
- */
-struct pmu {
-	struct list_head		entry;
-
-	struct device			*dev;
-	const struct attribute_group	**attr_groups;
-	char				*name;
-	int				type;
-
-	int * __percpu			pmu_disable_count;
-	struct perf_cpu_context * __percpu pmu_cpu_context;
-	int				task_ctx_nr;
-
-	/*
-	 * Fully disable/enable this PMU, can be used to protect from the PMI
-	 * as well as for lazy/batch writing of the MSRs.
-	 */
-	void (*pmu_enable)		(struct pmu *pmu); /* optional */
-	void (*pmu_disable)		(struct pmu *pmu); /* optional */
-
-	/*
-	 * Try and initialize the event for this PMU.
-	 * Should return -ENOENT when the @event doesn't match this PMU.
-	 */
-	int (*event_init)		(struct perf_event *event);
-
-#define PERF_EF_START	0x01		/* start the counter when adding    */
-#define PERF_EF_RELOAD	0x02		/* reload the counter when starting */
-#define PERF_EF_UPDATE	0x04		/* update the counter when stopping */
-
-	/*
-	 * Adds/Removes a counter to/from the PMU, can be done inside
-	 * a transaction, see the ->*_txn() methods.
-	 */
-	int  (*add)			(struct perf_event *event, int flags);
-	void (*del)			(struct perf_event *event, int flags);
-
-	/*
-	 * Starts/Stops a counter present on the PMU. The PMI handler
-	 * should stop the counter when perf_event_overflow() returns
-	 * !0. ->start() will be used to continue.
-	 */
-	void (*start)			(struct perf_event *event, int flags);
-	void (*stop)			(struct perf_event *event, int flags);
-
-	/*
-	 * Updates the counter value of the event.
-	 */
-	void (*read)			(struct perf_event *event);
-
-	/*
-	 * Group events scheduling is treated as a transaction, add
-	 * group events as a whole and perform one schedulability test.
-	 * If the test fails, roll back the whole group
-	 *
-	 * Start the transaction, after this ->add() doesn't need to
-	 * do schedulability tests.
-	 */
-	void (*start_txn)		(struct pmu *pmu); /* optional */
-	/*
-	 * If ->start_txn() disabled the ->add() schedulability test
-	 * then ->commit_txn() is required to perform one. On success
-	 * the transaction is closed. On error the transaction is kept
-	 * open until ->cancel_txn() is called.
-	 */
-	int  (*commit_txn)		(struct pmu *pmu); /* optional */
-	/*
-	 * Will cancel the transaction, assumes ->del() is called
-	 * for each successful ->add() during the transaction.
-	 */
-	void (*cancel_txn)		(struct pmu *pmu); /* optional */
-
-	/*
-	 * Will return the value for perf_event_mmap_page::index for this event,
-	 * if no implementation is provided it will default to: event->hw.idx + 1.
-	 */
-	int (*event_idx)		(struct perf_event *event); /*optional */
-
-	/*
-	 * flush branch stack on context-switches (needed in cpu-wide mode)
-	 */
-	void (*flush_branch_stack)	(void);
-};
-
-/**
- * enum perf_event_active_state - the states of a event
- */
-enum perf_event_active_state {
-	PERF_EVENT_STATE_ERROR		= -2,
-	PERF_EVENT_STATE_OFF		= -1,
-	PERF_EVENT_STATE_INACTIVE	=  0,
-	PERF_EVENT_STATE_ACTIVE		=  1,
-};
-
-struct file;
-struct perf_sample_data;
-
-typedef void (*perf_overflow_handler_t)(struct perf_event *,
-					struct perf_sample_data *,
-					struct pt_regs *regs);
-
-enum perf_group_flag {
-	PERF_GROUP_SOFTWARE		= 0x1,
-};
-
-#define SWEVENT_HLIST_BITS		8
-#define SWEVENT_HLIST_SIZE		(1 << SWEVENT_HLIST_BITS)
-
-struct swevent_hlist {
-	struct hlist_head		heads[SWEVENT_HLIST_SIZE];
-	struct rcu_head			rcu_head;
-};
-
-#define PERF_ATTACH_CONTEXT	0x01
-#define PERF_ATTACH_GROUP	0x02
-#define PERF_ATTACH_TASK	0x04
-
-#ifdef CONFIG_CGROUP_PERF
-/*
- * perf_cgroup_info keeps track of time_enabled for a cgroup.
- * This is a per-cpu dynamically allocated data structure.
- */
-struct perf_cgroup_info {
-	u64				time;
-	u64				timestamp;
-};
-
-struct perf_cgroup {
-	struct				cgroup_subsys_state css;
-	struct				perf_cgroup_info *info;	/* timing info, one per cpu */
-};
-#endif
-
-struct ring_buffer;
-
-/**
- * struct perf_event - performance event kernel representation:
- */
-struct perf_event {
-#ifdef CONFIG_PERF_EVENTS
-	struct list_head		group_entry;
-	struct list_head		event_entry;
-	struct list_head		sibling_list;
-	struct hlist_node		hlist_entry;
-	int				nr_siblings;
-	int				group_flags;
-	struct perf_event		*group_leader;
-	struct pmu			*pmu;
-
-	enum perf_event_active_state	state;
-	unsigned int			attach_state;
-	local64_t			count;
-	atomic64_t			child_count;
-
-	/*
-	 * These are the total time in nanoseconds that the event
-	 * has been enabled (i.e. eligible to run, and the task has
-	 * been scheduled in, if this is a per-task event)
-	 * and running (scheduled onto the CPU), respectively.
-	 *
-	 * They are computed from tstamp_enabled, tstamp_running and
-	 * tstamp_stopped when the event is in INACTIVE or ACTIVE state.
-	 */
-	u64				total_time_enabled;
-	u64				total_time_running;
-
-	/*
-	 * These are timestamps used for computing total_time_enabled
-	 * and total_time_running when the event is in INACTIVE or
-	 * ACTIVE state, measured in nanoseconds from an arbitrary point
-	 * in time.
-	 * tstamp_enabled: the notional time when the event was enabled
-	 * tstamp_running: the notional time when the event was scheduled on
-	 * tstamp_stopped: in INACTIVE state, the notional time when the
-	 *	event was scheduled off.
-	 */
-	u64				tstamp_enabled;
-	u64				tstamp_running;
-	u64				tstamp_stopped;
-
-	/*
-	 * timestamp shadows the actual context timing but it can
-	 * be safely used in NMI interrupt context. It reflects the
-	 * context time as it was when the event was last scheduled in.
-	 *
-	 * ctx_time already accounts for ctx->timestamp. Therefore to
-	 * compute ctx_time for a sample, simply add perf_clock().
-	 */
-	u64				shadow_ctx_time;
-
-	struct perf_event_attr		attr;
-	u16				header_size;
-	u16				id_header_size;
-	u16				read_size;
-	struct hw_perf_event		hw;
-
-	struct perf_event_context	*ctx;
-	struct file			*filp;
-
-	/*
-	 * These accumulate total time (in nanoseconds) that children
-	 * events have been enabled and running, respectively.
-	 */
-	atomic64_t			child_total_time_enabled;
-	atomic64_t			child_total_time_running;
-
-	/*
-	 * Protect attach/detach and child_list:
-	 */
-	struct mutex			child_mutex;
-	struct list_head		child_list;
-	struct perf_event		*parent;
-
-	int				oncpu;
-	int				cpu;
-
-	struct list_head		owner_entry;
-	struct task_struct		*owner;
-
-	/* mmap bits */
-	struct mutex			mmap_mutex;
-	atomic_t			mmap_count;
-	int				mmap_locked;
-	struct user_struct		*mmap_user;
-	struct ring_buffer		*rb;
-	struct list_head		rb_entry;
-
-	/* poll related */
-	wait_queue_head_t		waitq;
-	struct fasync_struct		*fasync;
-
-	/* delayed work for NMIs and such */
-	int				pending_wakeup;
-	int				pending_kill;
-	int				pending_disable;
-	struct irq_work			pending;
-
-	atomic_t			event_limit;
-
-	void (*destroy)(struct perf_event *);
-	struct rcu_head			rcu_head;
-
-	struct pid_namespace		*ns;
-	u64				id;
-
-	perf_overflow_handler_t		overflow_handler;
-	void				*overflow_handler_context;
-
-#ifdef CONFIG_EVENT_TRACING
-	struct ftrace_event_call	*tp_event;
-	struct event_filter		*filter;
-#ifdef CONFIG_FUNCTION_TRACER
-	struct ftrace_ops               ftrace_ops;
-#endif
-#endif
-
-#ifdef CONFIG_CGROUP_PERF
-	struct perf_cgroup		*cgrp; /* cgroup event is attach to */
-	int				cgrp_defer_enabled;
-#endif
-
-#endif /* CONFIG_PERF_EVENTS */
-};
-
-enum perf_event_context_type {
-	task_context,
-	cpu_context,
-};
-
-/**
- * struct perf_event_context - event context structure
- *
- * Used as a container for task events and CPU events as well:
- */
-struct perf_event_context {
-	struct pmu			*pmu;
-	enum perf_event_context_type	type;
-	/*
-	 * Protect the states of the events in the list,
-	 * nr_active, and the list:
-	 */
-	raw_spinlock_t			lock;
-	/*
-	 * Protect the list of events.  Locking either mutex or lock
-	 * is sufficient to ensure the list doesn't change; to change
-	 * the list you need to lock both the mutex and the spinlock.
-	 */
-	struct mutex			mutex;
-
-	struct list_head		pinned_groups;
-	struct list_head		flexible_groups;
-	struct list_head		event_list;
-	int				nr_events;
-	int				nr_active;
-	int				is_active;
-	int				nr_stat;
-	int				nr_freq;
-	int				rotate_disable;
-	atomic_t			refcount;
-	struct task_struct		*task;
-
-	/*
-	 * Context clock, runs when context enabled.
-	 */
-	u64				time;
-	u64				timestamp;
-
-	/*
-	 * These fields let us detect when two contexts have both
-	 * been cloned (inherited) from a common ancestor.
-	 */
-	struct perf_event_context	*parent_ctx;
-	u64				parent_gen;
-	u64				generation;
-	int				pin_count;
-	int				nr_cgroups;	 /* cgroup evts */
-	int				nr_branch_stack; /* branch_stack evt */
-	struct rcu_head			rcu_head;
-};
-
-/*
- * Number of contexts where an event can trigger:
- *	task, softirq, hardirq, nmi.
- */
-#define PERF_NR_CONTEXTS	4
-
-/**
- * struct perf_event_cpu_context - per cpu event context structure
- */
-struct perf_cpu_context {
-	struct perf_event_context	ctx;
-	struct perf_event_context	*task_ctx;
-	int				active_oncpu;
-	int				exclusive;
-	struct list_head		rotation_list;
-	int				jiffies_interval;
-	struct pmu			*active_pmu;
-	struct perf_cgroup		*cgrp;
-};
-
-struct perf_output_handle {
-	struct perf_event		*event;
-	struct ring_buffer		*rb;
-	unsigned long			wakeup;
-	unsigned long			size;
-	void				*addr;
-	int				page;
-};
-
-#ifdef CONFIG_PERF_EVENTS
-
-extern int perf_pmu_register(struct pmu *pmu, char *name, int type);
-extern void perf_pmu_unregister(struct pmu *pmu);
-
-extern int perf_num_counters(void);
-extern const char *perf_pmu_name(void);
-extern void __perf_event_task_sched_in(struct task_struct *prev,
-				       struct task_struct *task);
-extern void __perf_event_task_sched_out(struct task_struct *prev,
-					struct task_struct *next);
-extern int perf_event_init_task(struct task_struct *child);
-extern void perf_event_exit_task(struct task_struct *child);
-extern void perf_event_free_task(struct task_struct *task);
-extern void perf_event_delayed_put(struct task_struct *task);
-extern void perf_event_print_debug(void);
-extern void perf_pmu_disable(struct pmu *pmu);
-extern void perf_pmu_enable(struct pmu *pmu);
-extern int perf_event_task_disable(void);
-extern int perf_event_task_enable(void);
-extern int perf_event_refresh(struct perf_event *event, int refresh);
-extern void perf_event_update_userpage(struct perf_event *event);
-extern int perf_event_release_kernel(struct perf_event *event);
-extern struct perf_event *
-perf_event_create_kernel_counter(struct perf_event_attr *attr,
-				int cpu,
-				struct task_struct *task,
-				perf_overflow_handler_t callback,
-				void *context);
-extern u64 perf_event_read_value(struct perf_event *event,
-				 u64 *enabled, u64 *running);
-
-
-struct perf_sample_data {
-	u64				type;
-
-	u64				ip;
-	struct {
-		u32	pid;
-		u32	tid;
-	}				tid_entry;
-	u64				time;
-	u64				addr;
-	u64				id;
-	u64				stream_id;
-	struct {
-		u32	cpu;
-		u32	reserved;
-	}				cpu_entry;
-	u64				period;
-	struct perf_callchain_entry	*callchain;
-	struct perf_raw_record		*raw;
-	struct perf_branch_stack	*br_stack;
-};
-
-static inline void perf_sample_data_init(struct perf_sample_data *data, u64 addr)
-{
-	data->addr = addr;
-	data->raw  = NULL;
-	data->br_stack = NULL;
-}
-
-extern void perf_output_sample(struct perf_output_handle *handle,
-			       struct perf_event_header *header,
-			       struct perf_sample_data *data,
-			       struct perf_event *event);
-extern void perf_prepare_sample(struct perf_event_header *header,
-				struct perf_sample_data *data,
-				struct perf_event *event,
-				struct pt_regs *regs);
-
-extern int perf_event_overflow(struct perf_event *event,
-				 struct perf_sample_data *data,
-				 struct pt_regs *regs);
-
-static inline bool is_sampling_event(struct perf_event *event)
-{
-	return event->attr.sample_period != 0;
-}
-
-/*
- * Return 1 for a software event, 0 for a hardware event
- */
-static inline int is_software_event(struct perf_event *event)
-{
-	return event->pmu->task_ctx_nr == perf_sw_context;
-}
-
-extern struct static_key perf_swevent_enabled[PERF_COUNT_SW_MAX];
-
-extern void __perf_sw_event(u32, u64, struct pt_regs *, u64);
-
-#ifndef perf_arch_fetch_caller_regs
-static inline void perf_arch_fetch_caller_regs(struct pt_regs *regs, unsigned long ip) { }
-#endif
-
-/*
- * Take a snapshot of the regs. Skip ip and frame pointer to
- * the nth caller. We only need a few of the regs:
- * - ip for PERF_SAMPLE_IP
- * - cs for user_mode() tests
- * - bp for callchains
- * - eflags, for future purposes, just in case
- */
-static inline void perf_fetch_caller_regs(struct pt_regs *regs)
-{
-	memset(regs, 0, sizeof(*regs));
-
-	perf_arch_fetch_caller_regs(regs, CALLER_ADDR0);
-}
-
-static __always_inline void
-perf_sw_event(u32 event_id, u64 nr, struct pt_regs *regs, u64 addr)
-{
-	struct pt_regs hot_regs;
-
-	if (static_key_false(&perf_swevent_enabled[event_id])) {
-		if (!regs) {
-			perf_fetch_caller_regs(&hot_regs);
-			regs = &hot_regs;
-		}
-		__perf_sw_event(event_id, nr, regs, addr);
-	}
-}
-
-extern struct static_key_deferred perf_sched_events;
-
-static inline void perf_event_task_sched_in(struct task_struct *prev,
-					    struct task_struct *task)
-{
-	if (static_key_false(&perf_sched_events.key))
-		__perf_event_task_sched_in(prev, task);
-}
-
-static inline void perf_event_task_sched_out(struct task_struct *prev,
-					     struct task_struct *next)
-{
-	perf_sw_event(PERF_COUNT_SW_CONTEXT_SWITCHES, 1, NULL, 0);
-
-	if (static_key_false(&perf_sched_events.key))
-		__perf_event_task_sched_out(prev, next);
-}
-
-extern void perf_event_mmap(struct vm_area_struct *vma);
-extern struct perf_guest_info_callbacks *perf_guest_cbs;
-extern int perf_register_guest_info_callbacks(struct perf_guest_info_callbacks *callbacks);
-extern int perf_unregister_guest_info_callbacks(struct perf_guest_info_callbacks *callbacks);
-
-extern void perf_event_comm(struct task_struct *tsk);
-extern void perf_event_fork(struct task_struct *tsk);
-
-/* Callchains */
-DECLARE_PER_CPU(struct perf_callchain_entry, perf_callchain_entry);
-
-extern void perf_callchain_user(struct perf_callchain_entry *entry, struct pt_regs *regs);
-extern void perf_callchain_kernel(struct perf_callchain_entry *entry, struct pt_regs *regs);
-
-static inline void perf_callchain_store(struct perf_callchain_entry *entry, u64 ip)
-{
-	if (entry->nr < PERF_MAX_STACK_DEPTH)
-		entry->ip[entry->nr++] = ip;
-}
-
-extern int sysctl_perf_event_paranoid;
-extern int sysctl_perf_event_mlock;
-extern int sysctl_perf_event_sample_rate;
-
-extern int perf_proc_update_handler(struct ctl_table *table, int write,
-		void __user *buffer, size_t *lenp,
-		loff_t *ppos);
-
-static inline bool perf_paranoid_tracepoint_raw(void)
-{
-	return sysctl_perf_event_paranoid > -1;
-}
-
-static inline bool perf_paranoid_cpu(void)
-{
-	return sysctl_perf_event_paranoid > 0;
-}
-
-static inline bool perf_paranoid_kernel(void)
-{
-	return sysctl_perf_event_paranoid > 1;
-}
-
-extern void perf_event_init(void);
-extern void perf_tp_event(u64 addr, u64 count, void *record,
-			  int entry_size, struct pt_regs *regs,
-			  struct hlist_head *head, int rctx);
-extern void perf_bp_event(struct perf_event *event, void *data);
-
-#ifndef perf_misc_flags
-# define perf_misc_flags(regs) \
-		(user_mode(regs) ? PERF_RECORD_MISC_USER : PERF_RECORD_MISC_KERNEL)
-# define perf_instruction_pointer(regs)	instruction_pointer(regs)
-#endif
-
-static inline bool has_branch_stack(struct perf_event *event)
-{
-	return event->attr.sample_type & PERF_SAMPLE_BRANCH_STACK;
-}
-
-extern int perf_output_begin(struct perf_output_handle *handle,
-			     struct perf_event *event, unsigned int size);
-extern void perf_output_end(struct perf_output_handle *handle);
-extern void perf_output_copy(struct perf_output_handle *handle,
-			     const void *buf, unsigned int len);
-extern int perf_swevent_get_recursion_context(void);
-extern void perf_swevent_put_recursion_context(int rctx);
-extern void perf_event_enable(struct perf_event *event);
-extern void perf_event_disable(struct perf_event *event);
-extern void perf_event_task_tick(void);
-#else
-static inline void
-perf_event_task_sched_in(struct task_struct *prev,
-			 struct task_struct *task)			{ }
-static inline void
-perf_event_task_sched_out(struct task_struct *prev,
-			  struct task_struct *next)			{ }
-static inline int perf_event_init_task(struct task_struct *child)	{ return 0; }
-static inline void perf_event_exit_task(struct task_struct *child)	{ }
-static inline void perf_event_free_task(struct task_struct *task)	{ }
-static inline void perf_event_delayed_put(struct task_struct *task)	{ }
-static inline void perf_event_print_debug(void)				{ }
-static inline int perf_event_task_disable(void)				{ return -EINVAL; }
-static inline int perf_event_task_enable(void)				{ return -EINVAL; }
-static inline int perf_event_refresh(struct perf_event *event, int refresh)
-{
-	return -EINVAL;
-}
-
-static inline void
-perf_sw_event(u32 event_id, u64 nr, struct pt_regs *regs, u64 addr)	{ }
-static inline void
-perf_bp_event(struct perf_event *event, void *data)			{ }
-
-static inline int perf_register_guest_info_callbacks
-(struct perf_guest_info_callbacks *callbacks)				{ return 0; }
-static inline int perf_unregister_guest_info_callbacks
-(struct perf_guest_info_callbacks *callbacks)				{ return 0; }
-
-static inline void perf_event_mmap(struct vm_area_struct *vma)		{ }
-static inline void perf_event_comm(struct task_struct *tsk)		{ }
-static inline void perf_event_fork(struct task_struct *tsk)		{ }
-static inline void perf_event_init(void)				{ }
-static inline int  perf_swevent_get_recursion_context(void)		{ return -1; }
-static inline void perf_swevent_put_recursion_context(int rctx)		{ }
-static inline void perf_event_enable(struct perf_event *event)		{ }
-static inline void perf_event_disable(struct perf_event *event)		{ }
-static inline void perf_event_task_tick(void)				{ }
-#endif
-
-#define perf_output_put(handle, x) perf_output_copy((handle), &(x), sizeof(x))
-
-/*
- * This has to have a higher priority than migration_notifier in sched.c.
- */
-#define perf_cpu_notifier(fn)						\
-do {									\
-	static struct notifier_block fn##_nb __cpuinitdata =		\
-		{ .notifier_call = fn, .priority = CPU_PRI_PERF };	\
-	fn(&fn##_nb, (unsigned long)CPU_UP_PREPARE,			\
-		(void *)(unsigned long)smp_processor_id());		\
-	fn(&fn##_nb, (unsigned long)CPU_STARTING,			\
-		(void *)(unsigned long)smp_processor_id());		\
-	fn(&fn##_nb, (unsigned long)CPU_ONLINE,				\
-		(void *)(unsigned long)smp_processor_id());		\
-	register_cpu_notifier(&fn##_nb);				\
-} while (0)
-
-
-#define PMU_FORMAT_ATTR(_name, _format)					\
-static ssize_t								\
-_name##_show(struct device *dev,					\
-			       struct device_attribute *attr,		\
-			       char *page)				\
-{									\
-	BUILD_BUG_ON(sizeof(_format) >= PAGE_SIZE);			\
-	return sprintf(page, _format "\n");				\
-}									\
-									\
-static struct device_attribute format_attr_##_name = __ATTR_RO(_name)
-
-#endif /* __KERNEL__ */
-#endif /* _LINUX_PERF_EVENT_H */
diff --git a/ANDROID_3.4.5/include/linux/persistent_ram.h b/ANDROID_3.4.5/include/linux/persistent_ram.h
deleted file mode 100644
index 22422171..00000000
--- a/ANDROID_3.4.5/include/linux/persistent_ram.h
+++ /dev/null
@@ -1,83 +0,0 @@
-/*
- * Copyright (C) 2011 Google, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __LINUX_PERSISTENT_RAM_H__
-#define __LINUX_PERSISTENT_RAM_H__
-
-#include <linux/device.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/types.h>
-
-struct persistent_ram_buffer;
-
-struct persistent_ram_descriptor {
-	const char	*name;
-	phys_addr_t	size;
-};
-
-struct persistent_ram {
-	phys_addr_t	start;
-	phys_addr_t	size;
-
-	int ecc_block_size;
-	int ecc_size;
-	int ecc_symsize;
-	int ecc_poly;
-
-	int					num_descs;
-	struct persistent_ram_descriptor	*descs;
-
-	struct list_head node;
-};
-
-struct persistent_ram_zone {
-	struct list_head node;
-	void *vaddr;
-	struct persistent_ram_buffer *buffer;
-	size_t buffer_size;
-
-	/* ECC correction */
-	bool ecc;
-	char *par_buffer;
-	char *par_header;
-	struct rs_control *rs_decoder;
-	int corrected_bytes;
-	int bad_blocks;
-	int ecc_block_size;
-	int ecc_size;
-	int ecc_symsize;
-	int ecc_poly;
-
-	char *old_log;
-	size_t old_log_size;
-	size_t old_log_footer_size;
-	bool early;
-};
-
-int persistent_ram_early_init(struct persistent_ram *ram);
-
-struct persistent_ram_zone *persistent_ram_init_ringbuffer(struct device *dev,
-		bool ecc);
-
-int persistent_ram_write(struct persistent_ram_zone *prz, const void *s,
-	unsigned int count);
-
-size_t persistent_ram_old_size(struct persistent_ram_zone *prz);
-void *persistent_ram_old(struct persistent_ram_zone *prz);
-void persistent_ram_free_old(struct persistent_ram_zone *prz);
-ssize_t persistent_ram_ecc_string(struct persistent_ram_zone *prz,
-	char *str, size_t len);
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/personality.h b/ANDROID_3.4.5/include/linux/personality.h
deleted file mode 100644
index 8fc7dd1a..00000000
--- a/ANDROID_3.4.5/include/linux/personality.h
+++ /dev/null
@@ -1,121 +0,0 @@
-#ifndef _LINUX_PERSONALITY_H
-#define _LINUX_PERSONALITY_H
-
-#ifdef __KERNEL__
-
-/*
- * Handling of different ABIs (personalities).
- */
-
-struct exec_domain;
-struct pt_regs;
-
-extern int		register_exec_domain(struct exec_domain *);
-extern int		unregister_exec_domain(struct exec_domain *);
-extern int		__set_personality(unsigned int);
-
-#endif /* __KERNEL__ */
-
-/*
- * Flags for bug emulation.
- *
- * These occupy the top three bytes.
- */
-enum {
-	UNAME26	=               0x0020000,
-	ADDR_NO_RANDOMIZE = 	0x0040000,	/* disable randomization of VA space */
-	FDPIC_FUNCPTRS =	0x0080000,	/* userspace function ptrs point to descriptors
-						 * (signal handling)
-						 */
-	MMAP_PAGE_ZERO =	0x0100000,
-	ADDR_COMPAT_LAYOUT =	0x0200000,
-	READ_IMPLIES_EXEC =	0x0400000,
-	ADDR_LIMIT_32BIT =	0x0800000,
-	SHORT_INODE =		0x1000000,
-	WHOLE_SECONDS =		0x2000000,
-	STICKY_TIMEOUTS	=	0x4000000,
-	ADDR_LIMIT_3GB = 	0x8000000,
-};
-
-/*
- * Security-relevant compatibility flags that must be
- * cleared upon setuid or setgid exec:
- */
-#define PER_CLEAR_ON_SETID (READ_IMPLIES_EXEC  | \
-			    ADDR_NO_RANDOMIZE  | \
-			    ADDR_COMPAT_LAYOUT | \
-			    MMAP_PAGE_ZERO)
-
-/*
- * Personality types.
- *
- * These go in the low byte.  Avoid using the top bit, it will
- * conflict with error returns.
- */
-enum {
-	PER_LINUX =		0x0000,
-	PER_LINUX_32BIT =	0x0000 | ADDR_LIMIT_32BIT,
-	PER_LINUX_FDPIC =	0x0000 | FDPIC_FUNCPTRS,
-	PER_SVR4 =		0x0001 | STICKY_TIMEOUTS | MMAP_PAGE_ZERO,
-	PER_SVR3 =		0x0002 | STICKY_TIMEOUTS | SHORT_INODE,
-	PER_SCOSVR3 =		0x0003 | STICKY_TIMEOUTS |
-					 WHOLE_SECONDS | SHORT_INODE,
-	PER_OSR5 =		0x0003 | STICKY_TIMEOUTS | WHOLE_SECONDS,
-	PER_WYSEV386 =		0x0004 | STICKY_TIMEOUTS | SHORT_INODE,
-	PER_ISCR4 =		0x0005 | STICKY_TIMEOUTS,
-	PER_BSD =		0x0006,
-	PER_SUNOS =		0x0006 | STICKY_TIMEOUTS,
-	PER_XENIX =		0x0007 | STICKY_TIMEOUTS | SHORT_INODE,
-	PER_LINUX32 =		0x0008,
-	PER_LINUX32_3GB =	0x0008 | ADDR_LIMIT_3GB,
-	PER_IRIX32 =		0x0009 | STICKY_TIMEOUTS,/* IRIX5 32-bit */
-	PER_IRIXN32 =		0x000a | STICKY_TIMEOUTS,/* IRIX6 new 32-bit */
-	PER_IRIX64 =		0x000b | STICKY_TIMEOUTS,/* IRIX6 64-bit */
-	PER_RISCOS =		0x000c,
-	PER_SOLARIS =		0x000d | STICKY_TIMEOUTS,
-	PER_UW7 =		0x000e | STICKY_TIMEOUTS | MMAP_PAGE_ZERO,
-	PER_OSF4 =		0x000f,			 /* OSF/1 v4 */
-	PER_HPUX =		0x0010,
-	PER_MASK =		0x00ff,
-};
-
-#ifdef __KERNEL__
-
-/*
- * Description of an execution domain.
- * 
- * The first two members are refernced from assembly source
- * and should stay where they are unless explicitly needed.
- */
-typedef void (*handler_t)(int, struct pt_regs *);
-
-struct exec_domain {
-	const char		*name;		/* name of the execdomain */
-	handler_t		handler;	/* handler for syscalls */
-	unsigned char		pers_low;	/* lowest personality */
-	unsigned char		pers_high;	/* highest personality */
-	unsigned long		*signal_map;	/* signal mapping */
-	unsigned long		*signal_invmap;	/* reverse signal mapping */
-	struct map_segment	*err_map;	/* error mapping */
-	struct map_segment	*socktype_map;	/* socket type mapping */
-	struct map_segment	*sockopt_map;	/* socket option mapping */
-	struct map_segment	*af_map;	/* address family mapping */
-	struct module		*module;	/* module context of the ed. */
-	struct exec_domain	*next;		/* linked list (internal) */
-};
-
-/*
- * Return the base personality without flags.
- */
-#define personality(pers)	(pers & PER_MASK)
-
-
-/*
- * Change personality of the currently running process.
- */
-#define set_personality(pers) \
-	((current->personality == (pers)) ? 0 : __set_personality(pers))
-
-#endif /* __KERNEL__ */
-
-#endif /* _LINUX_PERSONALITY_H */
diff --git a/ANDROID_3.4.5/include/linux/pfkeyv2.h b/ANDROID_3.4.5/include/linux/pfkeyv2.h
deleted file mode 100644
index 0b80c806..00000000
--- a/ANDROID_3.4.5/include/linux/pfkeyv2.h
+++ /dev/null
@@ -1,370 +0,0 @@
-/* PF_KEY user interface, this is defined by rfc2367 so
- * do not make arbitrary modifications or else this header
- * file will not be compliant.
- */
-
-#ifndef _LINUX_PFKEY2_H
-#define _LINUX_PFKEY2_H
-
-#include <linux/types.h>
-
-#define PF_KEY_V2		2
-#define PFKEYV2_REVISION	199806L
-
-struct sadb_msg {
-	__u8		sadb_msg_version;
-	__u8		sadb_msg_type;
-	__u8		sadb_msg_errno;
-	__u8		sadb_msg_satype;
-	__u16	sadb_msg_len;
-	__u16	sadb_msg_reserved;
-	__u32	sadb_msg_seq;
-	__u32	sadb_msg_pid;
-} __attribute__((packed));
-/* sizeof(struct sadb_msg) == 16 */
-
-struct sadb_ext {
-	__u16	sadb_ext_len;
-	__u16	sadb_ext_type;
-} __attribute__((packed));
-/* sizeof(struct sadb_ext) == 4 */
-
-struct sadb_sa {
-	__u16	sadb_sa_len;
-	__u16	sadb_sa_exttype;
-	__be32		sadb_sa_spi;
-	__u8		sadb_sa_replay;
-	__u8		sadb_sa_state;
-	__u8		sadb_sa_auth;
-	__u8		sadb_sa_encrypt;
-	__u32	sadb_sa_flags;
-} __attribute__((packed));
-/* sizeof(struct sadb_sa) == 16 */
-
-struct sadb_lifetime {
-	__u16	sadb_lifetime_len;
-	__u16	sadb_lifetime_exttype;
-	__u32	sadb_lifetime_allocations;
-	__u64	sadb_lifetime_bytes;
-	__u64	sadb_lifetime_addtime;
-	__u64	sadb_lifetime_usetime;
-} __attribute__((packed));
-/* sizeof(struct sadb_lifetime) == 32 */
-
-struct sadb_address {
-	__u16	sadb_address_len;
-	__u16	sadb_address_exttype;
-	__u8		sadb_address_proto;
-	__u8		sadb_address_prefixlen;
-	__u16	sadb_address_reserved;
-} __attribute__((packed));
-/* sizeof(struct sadb_address) == 8 */
-
-struct sadb_key {
-	__u16	sadb_key_len;
-	__u16	sadb_key_exttype;
-	__u16	sadb_key_bits;
-	__u16	sadb_key_reserved;
-} __attribute__((packed));
-/* sizeof(struct sadb_key) == 8 */
-
-struct sadb_ident {
-	__u16	sadb_ident_len;
-	__u16	sadb_ident_exttype;
-	__u16	sadb_ident_type;
-	__u16	sadb_ident_reserved;
-	__u64	sadb_ident_id;
-} __attribute__((packed));
-/* sizeof(struct sadb_ident) == 16 */
-
-struct sadb_sens {
-	__u16	sadb_sens_len;
-	__u16	sadb_sens_exttype;
-	__u32	sadb_sens_dpd;
-	__u8		sadb_sens_sens_level;
-	__u8		sadb_sens_sens_len;
-	__u8		sadb_sens_integ_level;
-	__u8		sadb_sens_integ_len;
-	__u32	sadb_sens_reserved;
-} __attribute__((packed));
-/* sizeof(struct sadb_sens) == 16 */
-
-/* followed by:
-	__u64	sadb_sens_bitmap[sens_len];
-	__u64	sadb_integ_bitmap[integ_len];  */
-
-struct sadb_prop {
-	__u16	sadb_prop_len;
-	__u16	sadb_prop_exttype;
-	__u8		sadb_prop_replay;
-	__u8		sadb_prop_reserved[3];
-} __attribute__((packed));
-/* sizeof(struct sadb_prop) == 8 */
-
-/* followed by:
-	struct sadb_comb sadb_combs[(sadb_prop_len +
-		sizeof(__u64) - sizeof(struct sadb_prop)) /
-		sizeof(struct sadb_comb)]; */
-
-struct sadb_comb {
-	__u8		sadb_comb_auth;
-	__u8		sadb_comb_encrypt;
-	__u16	sadb_comb_flags;
-	__u16	sadb_comb_auth_minbits;
-	__u16	sadb_comb_auth_maxbits;
-	__u16	sadb_comb_encrypt_minbits;
-	__u16	sadb_comb_encrypt_maxbits;
-	__u32	sadb_comb_reserved;
-	__u32	sadb_comb_soft_allocations;
-	__u32	sadb_comb_hard_allocations;
-	__u64	sadb_comb_soft_bytes;
-	__u64	sadb_comb_hard_bytes;
-	__u64	sadb_comb_soft_addtime;
-	__u64	sadb_comb_hard_addtime;
-	__u64	sadb_comb_soft_usetime;
-	__u64	sadb_comb_hard_usetime;
-} __attribute__((packed));
-/* sizeof(struct sadb_comb) == 72 */
-
-struct sadb_supported {
-	__u16	sadb_supported_len;
-	__u16	sadb_supported_exttype;
-	__u32	sadb_supported_reserved;
-} __attribute__((packed));
-/* sizeof(struct sadb_supported) == 8 */
-
-/* followed by:
-	struct sadb_alg sadb_algs[(sadb_supported_len +
-		sizeof(__u64) - sizeof(struct sadb_supported)) /
-		sizeof(struct sadb_alg)]; */
-
-struct sadb_alg {
-	__u8		sadb_alg_id;
-	__u8		sadb_alg_ivlen;
-	__u16	sadb_alg_minbits;
-	__u16	sadb_alg_maxbits;
-	__u16	sadb_alg_reserved;
-} __attribute__((packed));
-/* sizeof(struct sadb_alg) == 8 */
-
-struct sadb_spirange {
-	__u16	sadb_spirange_len;
-	__u16	sadb_spirange_exttype;
-	__u32	sadb_spirange_min;
-	__u32	sadb_spirange_max;
-	__u32	sadb_spirange_reserved;
-} __attribute__((packed));
-/* sizeof(struct sadb_spirange) == 16 */
-
-struct sadb_x_kmprivate {
-	__u16	sadb_x_kmprivate_len;
-	__u16	sadb_x_kmprivate_exttype;
-	__u32	sadb_x_kmprivate_reserved;
-} __attribute__((packed));
-/* sizeof(struct sadb_x_kmprivate) == 8 */
-
-struct sadb_x_sa2 {
-	__u16	sadb_x_sa2_len;
-	__u16	sadb_x_sa2_exttype;
-	__u8		sadb_x_sa2_mode;
-	__u8		sadb_x_sa2_reserved1;
-	__u16	sadb_x_sa2_reserved2;
-	__u32	sadb_x_sa2_sequence;
-	__u32	sadb_x_sa2_reqid;
-} __attribute__((packed));
-/* sizeof(struct sadb_x_sa2) == 16 */
-
-struct sadb_x_policy {
-	__u16	sadb_x_policy_len;
-	__u16	sadb_x_policy_exttype;
-	__u16	sadb_x_policy_type;
-	__u8		sadb_x_policy_dir;
-	__u8		sadb_x_policy_reserved;
-	__u32	sadb_x_policy_id;
-	__u32	sadb_x_policy_priority;
-} __attribute__((packed));
-/* sizeof(struct sadb_x_policy) == 16 */
-
-struct sadb_x_ipsecrequest {
-	__u16	sadb_x_ipsecrequest_len;
-	__u16	sadb_x_ipsecrequest_proto;
-	__u8		sadb_x_ipsecrequest_mode;
-	__u8		sadb_x_ipsecrequest_level;
-	__u16	sadb_x_ipsecrequest_reserved1;
-	__u32	sadb_x_ipsecrequest_reqid;
-	__u32	sadb_x_ipsecrequest_reserved2;
-} __attribute__((packed));
-/* sizeof(struct sadb_x_ipsecrequest) == 16 */
-
-/* This defines the TYPE of Nat Traversal in use.  Currently only one
- * type of NAT-T is supported, draft-ietf-ipsec-udp-encaps-06
- */
-struct sadb_x_nat_t_type {
-	__u16	sadb_x_nat_t_type_len;
-	__u16	sadb_x_nat_t_type_exttype;
-	__u8		sadb_x_nat_t_type_type;
-	__u8		sadb_x_nat_t_type_reserved[3];
-} __attribute__((packed));
-/* sizeof(struct sadb_x_nat_t_type) == 8 */
-
-/* Pass a NAT Traversal port (Source or Dest port) */
-struct sadb_x_nat_t_port {
-	__u16	sadb_x_nat_t_port_len;
-	__u16	sadb_x_nat_t_port_exttype;
-	__be16		sadb_x_nat_t_port_port;
-	__u16	sadb_x_nat_t_port_reserved;
-} __attribute__((packed));
-/* sizeof(struct sadb_x_nat_t_port) == 8 */
-
-/* Generic LSM security context */
-struct sadb_x_sec_ctx {
-	__u16	sadb_x_sec_len;
-	__u16	sadb_x_sec_exttype;
-	__u8		sadb_x_ctx_alg;  /* LSMs: e.g., selinux == 1 */
-	__u8		sadb_x_ctx_doi;
-	__u16	sadb_x_ctx_len;
-} __attribute__((packed));
-/* sizeof(struct sadb_sec_ctx) = 8 */
-
-/* Used by MIGRATE to pass addresses IKE will use to perform
- * negotiation with the peer */
-struct sadb_x_kmaddress {
-	__u16	sadb_x_kmaddress_len;
-	__u16	sadb_x_kmaddress_exttype;
-	__u32	sadb_x_kmaddress_reserved;
-} __attribute__((packed));
-/* sizeof(struct sadb_x_kmaddress) == 8 */
-
-/* Message types */
-#define SADB_RESERVED		0
-#define SADB_GETSPI		1
-#define SADB_UPDATE		2
-#define SADB_ADD		3
-#define SADB_DELETE		4
-#define SADB_GET		5
-#define SADB_ACQUIRE		6
-#define SADB_REGISTER		7
-#define SADB_EXPIRE		8
-#define SADB_FLUSH		9
-#define SADB_DUMP		10
-#define SADB_X_PROMISC		11
-#define SADB_X_PCHANGE		12
-#define SADB_X_SPDUPDATE	13
-#define SADB_X_SPDADD		14
-#define SADB_X_SPDDELETE	15
-#define SADB_X_SPDGET		16
-#define SADB_X_SPDACQUIRE	17
-#define SADB_X_SPDDUMP		18
-#define SADB_X_SPDFLUSH		19
-#define SADB_X_SPDSETIDX	20
-#define SADB_X_SPDEXPIRE	21
-#define SADB_X_SPDDELETE2	22
-#define SADB_X_NAT_T_NEW_MAPPING	23
-#define SADB_X_MIGRATE		24
-#define SADB_MAX		24
-
-/* Security Association flags */
-#define SADB_SAFLAGS_PFS	1
-#define SADB_SAFLAGS_NOPMTUDISC	0x20000000
-#define SADB_SAFLAGS_DECAP_DSCP	0x40000000
-#define SADB_SAFLAGS_NOECN	0x80000000
-
-/* Security Association states */
-#define SADB_SASTATE_LARVAL	0
-#define SADB_SASTATE_MATURE	1
-#define SADB_SASTATE_DYING	2
-#define SADB_SASTATE_DEAD	3
-#define SADB_SASTATE_MAX	3
-
-/* Security Association types */
-#define SADB_SATYPE_UNSPEC	0
-#define SADB_SATYPE_AH		2
-#define SADB_SATYPE_ESP		3
-#define SADB_SATYPE_RSVP	5
-#define SADB_SATYPE_OSPFV2	6
-#define SADB_SATYPE_RIPV2	7
-#define SADB_SATYPE_MIP		8
-#define SADB_X_SATYPE_IPCOMP	9
-#define SADB_SATYPE_MAX		9
-
-/* Authentication algorithms */
-#define SADB_AALG_NONE			0
-#define SADB_AALG_MD5HMAC		2
-#define SADB_AALG_SHA1HMAC		3
-#define SADB_X_AALG_SHA2_256HMAC	5
-#define SADB_X_AALG_SHA2_384HMAC	6
-#define SADB_X_AALG_SHA2_512HMAC	7
-#define SADB_X_AALG_RIPEMD160HMAC	8
-#define SADB_X_AALG_AES_XCBC_MAC	9
-#define SADB_X_AALG_NULL		251	/* kame */
-#define SADB_AALG_MAX			251
-
-/* Encryption algorithms */
-#define SADB_EALG_NONE			0
-#define SADB_EALG_DESCBC		2
-#define SADB_EALG_3DESCBC		3
-#define SADB_X_EALG_CASTCBC		6
-#define SADB_X_EALG_BLOWFISHCBC		7
-#define SADB_EALG_NULL			11
-#define SADB_X_EALG_AESCBC		12
-#define SADB_X_EALG_AESCTR		13
-#define SADB_X_EALG_AES_CCM_ICV8	14
-#define SADB_X_EALG_AES_CCM_ICV12	15
-#define SADB_X_EALG_AES_CCM_ICV16	16
-#define SADB_X_EALG_AES_GCM_ICV8	18
-#define SADB_X_EALG_AES_GCM_ICV12	19
-#define SADB_X_EALG_AES_GCM_ICV16	20
-#define SADB_X_EALG_CAMELLIACBC		22
-#define SADB_X_EALG_NULL_AES_GMAC	23
-#define SADB_EALG_MAX                   253 /* last EALG */
-/* private allocations should use 249-255 (RFC2407) */
-#define SADB_X_EALG_SERPENTCBC  252     /* draft-ietf-ipsec-ciph-aes-cbc-00 */
-#define SADB_X_EALG_TWOFISHCBC  253     /* draft-ietf-ipsec-ciph-aes-cbc-00 */
-
-/* Compression algorithms */
-#define SADB_X_CALG_NONE		0
-#define SADB_X_CALG_OUI			1
-#define SADB_X_CALG_DEFLATE		2
-#define SADB_X_CALG_LZS			3
-#define SADB_X_CALG_LZJH		4
-#define SADB_X_CALG_MAX			4
-
-/* Extension Header values */
-#define SADB_EXT_RESERVED		0
-#define SADB_EXT_SA			1
-#define SADB_EXT_LIFETIME_CURRENT	2
-#define SADB_EXT_LIFETIME_HARD		3
-#define SADB_EXT_LIFETIME_SOFT		4
-#define SADB_EXT_ADDRESS_SRC		5
-#define SADB_EXT_ADDRESS_DST		6
-#define SADB_EXT_ADDRESS_PROXY		7
-#define SADB_EXT_KEY_AUTH		8
-#define SADB_EXT_KEY_ENCRYPT		9
-#define SADB_EXT_IDENTITY_SRC		10
-#define SADB_EXT_IDENTITY_DST		11
-#define SADB_EXT_SENSITIVITY		12
-#define SADB_EXT_PROPOSAL		13
-#define SADB_EXT_SUPPORTED_AUTH		14
-#define SADB_EXT_SUPPORTED_ENCRYPT	15
-#define SADB_EXT_SPIRANGE		16
-#define SADB_X_EXT_KMPRIVATE		17
-#define SADB_X_EXT_POLICY		18
-#define SADB_X_EXT_SA2			19
-/* The next four entries are for setting up NAT Traversal */
-#define SADB_X_EXT_NAT_T_TYPE		20
-#define SADB_X_EXT_NAT_T_SPORT		21
-#define SADB_X_EXT_NAT_T_DPORT		22
-#define SADB_X_EXT_NAT_T_OA		23
-#define SADB_X_EXT_SEC_CTX		24
-/* Used with MIGRATE to pass @ to IKE for negotiation */
-#define SADB_X_EXT_KMADDRESS		25
-#define SADB_EXT_MAX			25
-
-/* Identity Extension values */
-#define SADB_IDENTTYPE_RESERVED	0
-#define SADB_IDENTTYPE_PREFIX	1
-#define SADB_IDENTTYPE_FQDN	2
-#define SADB_IDENTTYPE_USERFQDN	3
-#define SADB_IDENTTYPE_MAX	3
-
-#endif /* !(_LINUX_PFKEY2_H) */
diff --git a/ANDROID_3.4.5/include/linux/pfn.h b/ANDROID_3.4.5/include/linux/pfn.h
deleted file mode 100644
index 76466372..00000000
--- a/ANDROID_3.4.5/include/linux/pfn.h
+++ /dev/null
@@ -1,13 +0,0 @@
-#ifndef _LINUX_PFN_H_
-#define _LINUX_PFN_H_
-
-#ifndef __ASSEMBLY__
-#include <linux/types.h>
-#endif
-
-#define PFN_ALIGN(x)	(((unsigned long)(x) + (PAGE_SIZE - 1)) & PAGE_MASK)
-#define PFN_UP(x)	(((x) + PAGE_SIZE-1) >> PAGE_SHIFT)
-#define PFN_DOWN(x)	((x) >> PAGE_SHIFT)
-#define PFN_PHYS(x)	((phys_addr_t)(x) << PAGE_SHIFT)
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/pg.h b/ANDROID_3.4.5/include/linux/pg.h
deleted file mode 100644
index db994bb0..00000000
--- a/ANDROID_3.4.5/include/linux/pg.h
+++ /dev/null
@@ -1,63 +0,0 @@
-/* 	pg.h (c) 1998  Grant R. Guenther <grant@torque.net>
- 		       Under the terms of the GNU General Public License
-
-
-	pg.h defines the user interface to the generic ATAPI packet
-        command driver for parallel port ATAPI devices (pg). The
-	driver is loosely modelled after the generic SCSI driver, sg,
-	although the actual interface is different.
-
-	The pg driver provides a simple character device interface for
-        sending ATAPI commands to a device.  With the exception of the
-	ATAPI reset operation, all operations are performed by a pair
-        of read and write operations to the appropriate /dev/pgN device.
-	A write operation delivers a command and any outbound data in
-        a single buffer.  Normally, the write will succeed unless the
-        device is offline or malfunctioning, or there is already another
-	command pending.  If the write succeeds, it should be followed
-        immediately by a read operation, to obtain any returned data and
-        status information.  A read will fail if there is no operation
-        in progress.
-
-	As a special case, the device can be reset with a write operation,
-        and in this case, no following read is expected, or permitted.
-
-	There are no ioctl() operations.  Any single operation
-	may transfer at most PG_MAX_DATA bytes.  Note that the driver must
-        copy the data through an internal buffer.  In keeping with all
-	current ATAPI devices, command packets are assumed to be exactly
-	12 bytes in length.
-
-	To permit future changes to this interface, the headers in the
-	read and write buffers contain a single character "magic" flag.
-        Currently this flag must be the character "P".
-
-*/
-
-#define PG_MAGIC	'P'
-#define PG_RESET	'Z'
-#define PG_COMMAND	'C'
-
-#define PG_MAX_DATA	32768
-
-struct pg_write_hdr {
-
-	char	magic;		/* == PG_MAGIC */
-	char	func;		/* PG_RESET or PG_COMMAND */
-	int     dlen;		/* number of bytes expected to transfer */
-	int     timeout;	/* number of seconds before timeout */
-	char	packet[12];	/* packet command */
-
-};
-
-struct pg_read_hdr {
-
-	char	magic;		/* == PG_MAGIC */
-	char	scsi;		/* "scsi" status == sense key */
-	int	dlen;		/* size of device transfer request */
-	int     duration;	/* time in seconds command took */
-	char    pad[12];	/* not used */
-
-};
-
-/* end of pg.h */
diff --git a/ANDROID_3.4.5/include/linux/phantom.h b/ANDROID_3.4.5/include/linux/phantom.h
deleted file mode 100644
index 94dd6645..00000000
--- a/ANDROID_3.4.5/include/linux/phantom.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- *  Copyright (C) 2005-2007 Jiri Slaby <jirislaby@gmail.com>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- */
-
-#ifndef __PHANTOM_H
-#define __PHANTOM_H
-
-#include <linux/types.h>
-
-/* PHN_(G/S)ET_REG param */
-struct phm_reg {
-	__u32 reg;
-	__u32 value;
-};
-
-/* PHN_(G/S)ET_REGS param */
-struct phm_regs {
-	__u32 count;
-	__u32 mask;
-	__u32 values[8];
-};
-
-#define PH_IOC_MAGIC		'p'
-#define PHN_GET_REG		_IOWR(PH_IOC_MAGIC, 0, struct phm_reg *)
-#define PHN_SET_REG		_IOW(PH_IOC_MAGIC, 1, struct phm_reg *)
-#define PHN_GET_REGS		_IOWR(PH_IOC_MAGIC, 2, struct phm_regs *)
-#define PHN_SET_REGS		_IOW(PH_IOC_MAGIC, 3, struct phm_regs *)
-/* this ioctl tells the driver, that the caller is not OpenHaptics and might
- * use improved registers update (no more phantom switchoffs when using
- * libphantom) */
-#define PHN_NOT_OH		_IO(PH_IOC_MAGIC, 4)
-#define PHN_GETREG		_IOWR(PH_IOC_MAGIC, 5, struct phm_reg)
-#define PHN_SETREG		_IOW(PH_IOC_MAGIC, 6, struct phm_reg)
-#define PHN_GETREGS		_IOWR(PH_IOC_MAGIC, 7, struct phm_regs)
-#define PHN_SETREGS		_IOW(PH_IOC_MAGIC, 8, struct phm_regs)
-
-#define PHN_CONTROL		0x6     /* control byte in iaddr space */
-#define PHN_CTL_AMP		0x1     /*   switch after torques change */
-#define PHN_CTL_BUT		0x2     /*   is button switched */
-#define PHN_CTL_IRQ		0x10    /*   is irq enabled */
-
-#define PHN_ZERO_FORCE		2048	/* zero torque on motor */
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/phonedev.h b/ANDROID_3.4.5/include/linux/phonedev.h
deleted file mode 100644
index 4269de99..00000000
--- a/ANDROID_3.4.5/include/linux/phonedev.h
+++ /dev/null
@@ -1,25 +0,0 @@
-#ifndef __LINUX_PHONEDEV_H
-#define __LINUX_PHONEDEV_H
-
-#include <linux/types.h>
-
-#ifdef __KERNEL__
-
-#include <linux/poll.h>
-
-struct phone_device {
-	struct phone_device *next;
-	const struct file_operations *f_op;
-	int (*open) (struct phone_device *, struct file *);
-	int board;		/* Device private index */
-	int minor;
-};
-
-extern int phonedev_init(void);
-#define PHONE_MAJOR	100
-extern int phone_register_device(struct phone_device *, int unit);
-#define PHONE_UNIT_ANY	-1
-extern void phone_unregister_device(struct phone_device *);
-
-#endif
-#endif
diff --git a/ANDROID_3.4.5/include/linux/phonet.h b/ANDROID_3.4.5/include/linux/phonet.h
deleted file mode 100644
index f48bfc80..00000000
--- a/ANDROID_3.4.5/include/linux/phonet.h
+++ /dev/null
@@ -1,200 +0,0 @@
-/**
- * file phonet.h
- *
- * Phonet sockets kernel interface
- *
- * Copyright (C) 2008 Nokia Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- */
-
-#ifndef LINUX_PHONET_H
-#define LINUX_PHONET_H
-
-#include <linux/types.h>
-#include <linux/socket.h>
-
-/* Automatic protocol selection */
-#define PN_PROTO_TRANSPORT	0
-/* Phonet datagram socket */
-#define PN_PROTO_PHONET		1
-/* Phonet pipe */
-#define PN_PROTO_PIPE		2
-#define PHONET_NPROTO		3
-
-/* Socket options for SOL_PNPIPE level */
-#define PNPIPE_ENCAP		1
-#define PNPIPE_IFINDEX		2
-#define PNPIPE_HANDLE		3
-#define PNPIPE_INITSTATE	4
-
-#define PNADDR_ANY		0
-#define PNADDR_BROADCAST	0xFC
-#define PNPORT_RESOURCE_ROUTING	0
-
-/* Values for PNPIPE_ENCAP option */
-#define PNPIPE_ENCAP_NONE	0
-#define PNPIPE_ENCAP_IP		1
-
-/* ioctls */
-#define SIOCPNGETOBJECT		(SIOCPROTOPRIVATE + 0)
-#define SIOCPNENABLEPIPE	(SIOCPROTOPRIVATE + 13)
-#define SIOCPNADDRESOURCE	(SIOCPROTOPRIVATE + 14)
-#define SIOCPNDELRESOURCE	(SIOCPROTOPRIVATE + 15)
-
-/* Phonet protocol header */
-struct phonethdr {
-	__u8	pn_rdev;
-	__u8	pn_sdev;
-	__u8	pn_res;
-	__be16	pn_length;
-	__u8	pn_robj;
-	__u8	pn_sobj;
-} __attribute__((packed));
-
-/* Common Phonet payload header */
-struct phonetmsg {
-	__u8	pn_trans_id;	/* transaction ID */
-	__u8	pn_msg_id;	/* message type */
-	union {
-		struct {
-			__u8	pn_submsg_id;	/* message subtype */
-			__u8	pn_data[5];
-		} base;
-		struct {
-			__u16	pn_e_res_id;	/* extended resource ID */
-			__u8	pn_e_submsg_id;	/* message subtype */
-			__u8	pn_e_data[3];
-		} ext;
-	} pn_msg_u;
-};
-#define PN_COMMON_MESSAGE	0xF0
-#define PN_COMMGR		0x10
-#define PN_PREFIX		0xE0 /* resource for extended messages */
-#define pn_submsg_id		pn_msg_u.base.pn_submsg_id
-#define pn_e_submsg_id		pn_msg_u.ext.pn_e_submsg_id
-#define pn_e_res_id		pn_msg_u.ext.pn_e_res_id
-#define pn_data			pn_msg_u.base.pn_data
-#define pn_e_data		pn_msg_u.ext.pn_e_data
-
-/* data for unreachable errors */
-#define PN_COMM_SERVICE_NOT_IDENTIFIED_RESP	0x01
-#define PN_COMM_ISA_ENTITY_NOT_REACHABLE_RESP	0x14
-#define pn_orig_msg_id		pn_data[0]
-#define pn_status		pn_data[1]
-#define pn_e_orig_msg_id	pn_e_data[0]
-#define pn_e_status		pn_e_data[1]
-
-/* Phonet socket address structure */
-struct sockaddr_pn {
-	__kernel_sa_family_t spn_family;
-	__u8 spn_obj;
-	__u8 spn_dev;
-	__u8 spn_resource;
-	__u8 spn_zero[sizeof(struct sockaddr) - sizeof(__kernel_sa_family_t) - 3];
-} __attribute__((packed));
-
-/* Well known address */
-#define PN_DEV_PC	0x10
-
-static inline __u16 pn_object(__u8 addr, __u16 port)
-{
-	return (addr << 8) | (port & 0x3ff);
-}
-
-static inline __u8 pn_obj(__u16 handle)
-{
-	return handle & 0xff;
-}
-
-static inline __u8 pn_dev(__u16 handle)
-{
-	return handle >> 8;
-}
-
-static inline __u16 pn_port(__u16 handle)
-{
-	return handle & 0x3ff;
-}
-
-static inline __u8 pn_addr(__u16 handle)
-{
-	return (handle >> 8) & 0xfc;
-}
-
-static inline void pn_sockaddr_set_addr(struct sockaddr_pn *spn, __u8 addr)
-{
-	spn->spn_dev &= 0x03;
-	spn->spn_dev |= addr & 0xfc;
-}
-
-static inline void pn_sockaddr_set_port(struct sockaddr_pn *spn, __u16 port)
-{
-	spn->spn_dev &= 0xfc;
-	spn->spn_dev |= (port >> 8) & 0x03;
-	spn->spn_obj = port & 0xff;
-}
-
-static inline void pn_sockaddr_set_object(struct sockaddr_pn *spn,
-						__u16 handle)
-{
-	spn->spn_dev = pn_dev(handle);
-	spn->spn_obj = pn_obj(handle);
-}
-
-static inline void pn_sockaddr_set_resource(struct sockaddr_pn *spn,
-						__u8 resource)
-{
-	spn->spn_resource = resource;
-}
-
-static inline __u8 pn_sockaddr_get_addr(const struct sockaddr_pn *spn)
-{
-	return spn->spn_dev & 0xfc;
-}
-
-static inline __u16 pn_sockaddr_get_port(const struct sockaddr_pn *spn)
-{
-	return ((spn->spn_dev & 0x03) << 8) | spn->spn_obj;
-}
-
-static inline __u16 pn_sockaddr_get_object(const struct sockaddr_pn *spn)
-{
-	return pn_object(spn->spn_dev, spn->spn_obj);
-}
-
-static inline __u8 pn_sockaddr_get_resource(const struct sockaddr_pn *spn)
-{
-	return spn->spn_resource;
-}
-
-/* Phonet device ioctl requests */
-#ifdef __KERNEL__
-#define SIOCPNGAUTOCONF		(SIOCDEVPRIVATE + 0)
-
-struct if_phonet_autoconf {
-	uint8_t device;
-};
-
-struct if_phonet_req {
-	char ifr_phonet_name[16];
-	union {
-		struct if_phonet_autoconf ifru_phonet_autoconf;
-	} ifr_ifru;
-};
-#define ifr_phonet_autoconf ifr_ifru.ifru_phonet_autoconf
-#endif /* __KERNEL__ */
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/phy.h b/ANDROID_3.4.5/include/linux/phy.h
deleted file mode 100644
index 6fe0a37d..00000000
--- a/ANDROID_3.4.5/include/linux/phy.h
+++ /dev/null
@@ -1,537 +0,0 @@
-/*
- * include/linux/phy.h
- *
- * Framework and drivers for configuring and reading different PHYs
- * Based on code in sungem_phy.c and gianfar_phy.c
- *
- * Author: Andy Fleming
- *
- * Copyright (c) 2004 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-
-#ifndef __PHY_H
-#define __PHY_H
-
-#include <linux/spinlock.h>
-#include <linux/ethtool.h>
-#include <linux/mii.h>
-#include <linux/timer.h>
-#include <linux/workqueue.h>
-#include <linux/mod_devicetable.h>
-
-#include <linux/atomic.h>
-
-#define PHY_BASIC_FEATURES	(SUPPORTED_10baseT_Half | \
-				 SUPPORTED_10baseT_Full | \
-				 SUPPORTED_100baseT_Half | \
-				 SUPPORTED_100baseT_Full | \
-				 SUPPORTED_Autoneg | \
-				 SUPPORTED_TP | \
-				 SUPPORTED_MII)
-
-#define PHY_GBIT_FEATURES	(PHY_BASIC_FEATURES | \
-				 SUPPORTED_1000baseT_Half | \
-				 SUPPORTED_1000baseT_Full)
-
-/*
- * Set phydev->irq to PHY_POLL if interrupts are not supported,
- * or not desired for this PHY.  Set to PHY_IGNORE_INTERRUPT if
- * the attached driver handles the interrupt
- */
-#define PHY_POLL		-1
-#define PHY_IGNORE_INTERRUPT	-2
-
-#define PHY_HAS_INTERRUPT	0x00000001
-#define PHY_HAS_MAGICANEG	0x00000002
-
-/* Interface Mode definitions */
-typedef enum {
-	PHY_INTERFACE_MODE_NA,
-	PHY_INTERFACE_MODE_MII,
-	PHY_INTERFACE_MODE_GMII,
-	PHY_INTERFACE_MODE_SGMII,
-	PHY_INTERFACE_MODE_TBI,
-	PHY_INTERFACE_MODE_RMII,
-	PHY_INTERFACE_MODE_RGMII,
-	PHY_INTERFACE_MODE_RGMII_ID,
-	PHY_INTERFACE_MODE_RGMII_RXID,
-	PHY_INTERFACE_MODE_RGMII_TXID,
-	PHY_INTERFACE_MODE_RTBI,
-	PHY_INTERFACE_MODE_SMII,
-} phy_interface_t;
-
-
-#define PHY_INIT_TIMEOUT	100000
-#define PHY_STATE_TIME		1
-#define PHY_FORCE_TIMEOUT	10
-#define PHY_AN_TIMEOUT		10
-
-#define PHY_MAX_ADDR	32
-
-/* Used when trying to connect to a specific phy (mii bus id:phy device id) */
-#define PHY_ID_FMT "%s:%02x"
-
-/*
- * Need to be a little smaller than phydev->dev.bus_id to leave room
- * for the ":%02x"
- */
-#define MII_BUS_ID_SIZE	(20 - 3)
-
-/* Or MII_ADDR_C45 into regnum for read/write on mii_bus to enable the 21 bit
-   IEEE 802.3ae clause 45 addressing mode used by 10GIGE phy chips. */
-#define MII_ADDR_C45 (1<<30)
-
-struct device;
-struct sk_buff;
-
-/*
- * The Bus class for PHYs.  Devices which provide access to
- * PHYs should register using this structure
- */
-struct mii_bus {
-	const char *name;
-	char id[MII_BUS_ID_SIZE];
-	void *priv;
-	int (*read)(struct mii_bus *bus, int phy_id, int regnum);
-	int (*write)(struct mii_bus *bus, int phy_id, int regnum, u16 val);
-	int (*reset)(struct mii_bus *bus);
-
-	/*
-	 * A lock to ensure that only one thing can read/write
-	 * the MDIO bus at a time
-	 */
-	struct mutex mdio_lock;
-
-	struct device *parent;
-	enum {
-		MDIOBUS_ALLOCATED = 1,
-		MDIOBUS_REGISTERED,
-		MDIOBUS_UNREGISTERED,
-		MDIOBUS_RELEASED,
-	} state;
-	struct device dev;
-
-	/* list of all PHYs on bus */
-	struct phy_device *phy_map[PHY_MAX_ADDR];
-
-	/* PHY addresses to be ignored when probing */
-	u32 phy_mask;
-
-	/*
-	 * Pointer to an array of interrupts, each PHY's
-	 * interrupt at the index matching its address
-	 */
-	int *irq;
-};
-#define to_mii_bus(d) container_of(d, struct mii_bus, dev)
-
-struct mii_bus *mdiobus_alloc_size(size_t);
-static inline struct mii_bus *mdiobus_alloc(void)
-{
-	return mdiobus_alloc_size(0);
-}
-
-int mdiobus_register(struct mii_bus *bus);
-void mdiobus_unregister(struct mii_bus *bus);
-void mdiobus_free(struct mii_bus *bus);
-struct phy_device *mdiobus_scan(struct mii_bus *bus, int addr);
-int mdiobus_read(struct mii_bus *bus, int addr, u32 regnum);
-int mdiobus_write(struct mii_bus *bus, int addr, u32 regnum, u16 val);
-
-
-#define PHY_INTERRUPT_DISABLED	0x0
-#define PHY_INTERRUPT_ENABLED	0x80000000
-
-/* PHY state machine states:
- *
- * DOWN: PHY device and driver are not ready for anything.  probe
- * should be called if and only if the PHY is in this state,
- * given that the PHY device exists.
- * - PHY driver probe function will, depending on the PHY, set
- * the state to STARTING or READY
- *
- * STARTING:  PHY device is coming up, and the ethernet driver is
- * not ready.  PHY drivers may set this in the probe function.
- * If they do, they are responsible for making sure the state is
- * eventually set to indicate whether the PHY is UP or READY,
- * depending on the state when the PHY is done starting up.
- * - PHY driver will set the state to READY
- * - start will set the state to PENDING
- *
- * READY: PHY is ready to send and receive packets, but the
- * controller is not.  By default, PHYs which do not implement
- * probe will be set to this state by phy_probe().  If the PHY
- * driver knows the PHY is ready, and the PHY state is STARTING,
- * then it sets this STATE.
- * - start will set the state to UP
- *
- * PENDING: PHY device is coming up, but the ethernet driver is
- * ready.  phy_start will set this state if the PHY state is
- * STARTING.
- * - PHY driver will set the state to UP when the PHY is ready
- *
- * UP: The PHY and attached device are ready to do work.
- * Interrupts should be started here.
- * - timer moves to AN
- *
- * AN: The PHY is currently negotiating the link state.  Link is
- * therefore down for now.  phy_timer will set this state when it
- * detects the state is UP.  config_aneg will set this state
- * whenever called with phydev->autoneg set to AUTONEG_ENABLE.
- * - If autonegotiation finishes, but there's no link, it sets
- *   the state to NOLINK.
- * - If aneg finishes with link, it sets the state to RUNNING,
- *   and calls adjust_link
- * - If autonegotiation did not finish after an arbitrary amount
- *   of time, autonegotiation should be tried again if the PHY
- *   supports "magic" autonegotiation (back to AN)
- * - If it didn't finish, and no magic_aneg, move to FORCING.
- *
- * NOLINK: PHY is up, but not currently plugged in.
- * - If the timer notes that the link comes back, we move to RUNNING
- * - config_aneg moves to AN
- * - phy_stop moves to HALTED
- *
- * FORCING: PHY is being configured with forced settings
- * - if link is up, move to RUNNING
- * - If link is down, we drop to the next highest setting, and
- *   retry (FORCING) after a timeout
- * - phy_stop moves to HALTED
- *
- * RUNNING: PHY is currently up, running, and possibly sending
- * and/or receiving packets
- * - timer will set CHANGELINK if we're polling (this ensures the
- *   link state is polled every other cycle of this state machine,
- *   which makes it every other second)
- * - irq will set CHANGELINK
- * - config_aneg will set AN
- * - phy_stop moves to HALTED
- *
- * CHANGELINK: PHY experienced a change in link state
- * - timer moves to RUNNING if link
- * - timer moves to NOLINK if the link is down
- * - phy_stop moves to HALTED
- *
- * HALTED: PHY is up, but no polling or interrupts are done. Or
- * PHY is in an error state.
- *
- * - phy_start moves to RESUMING
- *
- * RESUMING: PHY was halted, but now wants to run again.
- * - If we are forcing, or aneg is done, timer moves to RUNNING
- * - If aneg is not done, timer moves to AN
- * - phy_stop moves to HALTED
- */
-enum phy_state {
-	PHY_DOWN=0,
-	PHY_STARTING,
-	PHY_READY,
-	PHY_PENDING,
-	PHY_UP,
-	PHY_AN,
-	PHY_RUNNING,
-	PHY_NOLINK,
-	PHY_FORCING,
-	PHY_CHANGELINK,
-	PHY_HALTED,
-	PHY_RESUMING
-};
-
-
-/* phy_device: An instance of a PHY
- *
- * drv: Pointer to the driver for this PHY instance
- * bus: Pointer to the bus this PHY is on
- * dev: driver model device structure for this PHY
- * phy_id: UID for this device found during discovery
- * state: state of the PHY for management purposes
- * dev_flags: Device-specific flags used by the PHY driver.
- * addr: Bus address of PHY
- * link_timeout: The number of timer firings to wait before the
- * giving up on the current attempt at acquiring a link
- * irq: IRQ number of the PHY's interrupt (-1 if none)
- * phy_timer: The timer for handling the state machine
- * phy_queue: A work_queue for the interrupt
- * attached_dev: The attached enet driver's device instance ptr
- * adjust_link: Callback for the enet controller to respond to
- * changes in the link state.
- * adjust_state: Callback for the enet driver to respond to
- * changes in the state machine.
- *
- * speed, duplex, pause, supported, advertising, and
- * autoneg are used like in mii_if_info
- *
- * interrupts currently only supports enabled or disabled,
- * but could be changed in the future to support enabling
- * and disabling specific interrupts
- *
- * Contains some infrastructure for polling and interrupt
- * handling, as well as handling shifts in PHY hardware state
- */
-struct phy_device {
-	/* Information about the PHY type */
-	/* And management functions */
-	struct phy_driver *drv;
-
-	struct mii_bus *bus;
-
-	struct device dev;
-
-	u32 phy_id;
-
-	enum phy_state state;
-
-	u32 dev_flags;
-
-	phy_interface_t interface;
-
-	/* Bus address of the PHY (0-31) */
-	int addr;
-
-	/*
-	 * forced speed & duplex (no autoneg)
-	 * partner speed & duplex & pause (autoneg)
-	 */
-	int speed;
-	int duplex;
-	int pause;
-	int asym_pause;
-
-	/* The most recently read link state */
-	int link;
-
-	/* Enabled Interrupts */
-	u32 interrupts;
-
-	/* Union of PHY and Attached devices' supported modes */
-	/* See mii.h for more info */
-	u32 supported;
-	u32 advertising;
-
-	int autoneg;
-
-	int link_timeout;
-
-	/*
-	 * Interrupt number for this PHY
-	 * -1 means no interrupt
-	 */
-	int irq;
-
-	/* private data pointer */
-	/* For use by PHYs to maintain extra state */
-	void *priv;
-
-	/* Interrupt and Polling infrastructure */
-	struct work_struct phy_queue;
-	struct delayed_work state_queue;
-	atomic_t irq_disable;
-
-	struct mutex lock;
-
-	struct net_device *attached_dev;
-
-	void (*adjust_link)(struct net_device *dev);
-
-	void (*adjust_state)(struct net_device *dev);
-};
-#define to_phy_device(d) container_of(d, struct phy_device, dev)
-
-/* struct phy_driver: Driver structure for a particular PHY type
- *
- * phy_id: The result of reading the UID registers of this PHY
- *   type, and ANDing them with the phy_id_mask.  This driver
- *   only works for PHYs with IDs which match this field
- * name: The friendly name of this PHY type
- * phy_id_mask: Defines the important bits of the phy_id
- * features: A list of features (speed, duplex, etc) supported
- *   by this PHY
- * flags: A bitfield defining certain other features this PHY
- *   supports (like interrupts)
- *
- * The drivers must implement config_aneg and read_status.  All
- * other functions are optional. Note that none of these
- * functions should be called from interrupt time.  The goal is
- * for the bus read/write functions to be able to block when the
- * bus transaction is happening, and be freed up by an interrupt
- * (The MPC85xx has this ability, though it is not currently
- * supported in the driver).
- */
-struct phy_driver {
-	u32 phy_id;
-	char *name;
-	unsigned int phy_id_mask;
-	u32 features;
-	u32 flags;
-
-	/*
-	 * Called to initialize the PHY,
-	 * including after a reset
-	 */
-	int (*config_init)(struct phy_device *phydev);
-
-	/*
-	 * Called during discovery.  Used to set
-	 * up device-specific structures, if any
-	 */
-	int (*probe)(struct phy_device *phydev);
-
-	/* PHY Power Management */
-	int (*suspend)(struct phy_device *phydev);
-	int (*resume)(struct phy_device *phydev);
-
-	/*
-	 * Configures the advertisement and resets
-	 * autonegotiation if phydev->autoneg is on,
-	 * forces the speed to the current settings in phydev
-	 * if phydev->autoneg is off
-	 */
-	int (*config_aneg)(struct phy_device *phydev);
-
-	/* Determines the negotiated speed and duplex */
-	int (*read_status)(struct phy_device *phydev);
-
-	/* Clears any pending interrupts */
-	int (*ack_interrupt)(struct phy_device *phydev);
-
-	/* Enables or disables interrupts */
-	int (*config_intr)(struct phy_device *phydev);
-
-	/*
-	 * Checks if the PHY generated an interrupt.
-	 * For multi-PHY devices with shared PHY interrupt pin
-	 */
-	int (*did_interrupt)(struct phy_device *phydev);
-
-	/* Clears up any memory if needed */
-	void (*remove)(struct phy_device *phydev);
-
-	/* Handles SIOCSHWTSTAMP ioctl for hardware time stamping. */
-	int  (*hwtstamp)(struct phy_device *phydev, struct ifreq *ifr);
-
-	/*
-	 * Requests a Rx timestamp for 'skb'. If the skb is accepted,
-	 * the phy driver promises to deliver it using netif_rx() as
-	 * soon as a timestamp becomes available. One of the
-	 * PTP_CLASS_ values is passed in 'type'. The function must
-	 * return true if the skb is accepted for delivery.
-	 */
-	bool (*rxtstamp)(struct phy_device *dev, struct sk_buff *skb, int type);
-
-	/*
-	 * Requests a Tx timestamp for 'skb'. The phy driver promises
-	 * to deliver it using skb_complete_tx_timestamp() as soon as a
-	 * timestamp becomes available. One of the PTP_CLASS_ values
-	 * is passed in 'type'.
-	 */
-	void (*txtstamp)(struct phy_device *dev, struct sk_buff *skb, int type);
-
-	struct device_driver driver;
-};
-#define to_phy_driver(d) container_of(d, struct phy_driver, driver)
-
-#define PHY_ANY_ID "MATCH ANY PHY"
-#define PHY_ANY_UID 0xffffffff
-
-/* A Structure for boards to register fixups with the PHY Lib */
-struct phy_fixup {
-	struct list_head list;
-	char bus_id[20];
-	u32 phy_uid;
-	u32 phy_uid_mask;
-	int (*run)(struct phy_device *phydev);
-};
-
-/**
- * phy_read - Convenience function for reading a given PHY register
- * @phydev: the phy_device struct
- * @regnum: register number to read
- *
- * NOTE: MUST NOT be called from interrupt context,
- * because the bus read/write functions may wait for an interrupt
- * to conclude the operation.
- */
-static inline int phy_read(struct phy_device *phydev, u32 regnum)
-{
-	return mdiobus_read(phydev->bus, phydev->addr, regnum);
-}
-
-/**
- * phy_write - Convenience function for writing a given PHY register
- * @phydev: the phy_device struct
- * @regnum: register number to write
- * @val: value to write to @regnum
- *
- * NOTE: MUST NOT be called from interrupt context,
- * because the bus read/write functions may wait for an interrupt
- * to conclude the operation.
- */
-static inline int phy_write(struct phy_device *phydev, u32 regnum, u16 val)
-{
-	return mdiobus_write(phydev->bus, phydev->addr, regnum, val);
-}
-
-int get_phy_id(struct mii_bus *bus, int addr, u32 *phy_id);
-struct phy_device* get_phy_device(struct mii_bus *bus, int addr);
-int phy_device_register(struct phy_device *phy);
-int phy_init_hw(struct phy_device *phydev);
-struct phy_device * phy_attach(struct net_device *dev,
-		const char *bus_id, u32 flags, phy_interface_t interface);
-struct phy_device *phy_find_first(struct mii_bus *bus);
-int phy_connect_direct(struct net_device *dev, struct phy_device *phydev,
-		void (*handler)(struct net_device *), u32 flags,
-		phy_interface_t interface);
-struct phy_device * phy_connect(struct net_device *dev, const char *bus_id,
-		void (*handler)(struct net_device *), u32 flags,
-		phy_interface_t interface);
-void phy_disconnect(struct phy_device *phydev);
-void phy_detach(struct phy_device *phydev);
-void phy_start(struct phy_device *phydev);
-void phy_stop(struct phy_device *phydev);
-int phy_start_aneg(struct phy_device *phydev);
-
-int phy_stop_interrupts(struct phy_device *phydev);
-
-static inline int phy_read_status(struct phy_device *phydev) {
-	return phydev->drv->read_status(phydev);
-}
-
-int genphy_restart_aneg(struct phy_device *phydev);
-int genphy_config_aneg(struct phy_device *phydev);
-int genphy_update_link(struct phy_device *phydev);
-int genphy_read_status(struct phy_device *phydev);
-int genphy_suspend(struct phy_device *phydev);
-int genphy_resume(struct phy_device *phydev);
-void phy_driver_unregister(struct phy_driver *drv);
-int phy_driver_register(struct phy_driver *new_driver);
-void phy_state_machine(struct work_struct *work);
-void phy_start_machine(struct phy_device *phydev,
-		void (*handler)(struct net_device *));
-void phy_stop_machine(struct phy_device *phydev);
-int phy_ethtool_sset(struct phy_device *phydev, struct ethtool_cmd *cmd);
-int phy_ethtool_gset(struct phy_device *phydev, struct ethtool_cmd *cmd);
-int phy_mii_ioctl(struct phy_device *phydev,
-		struct ifreq *ifr, int cmd);
-int phy_start_interrupts(struct phy_device *phydev);
-void phy_print_status(struct phy_device *phydev);
-void phy_device_free(struct phy_device *phydev);
-
-int phy_register_fixup(const char *bus_id, u32 phy_uid, u32 phy_uid_mask,
-		int (*run)(struct phy_device *));
-int phy_register_fixup_for_id(const char *bus_id,
-		int (*run)(struct phy_device *));
-int phy_register_fixup_for_uid(u32 phy_uid, u32 phy_uid_mask,
-		int (*run)(struct phy_device *));
-int phy_scan_fixups(struct phy_device *phydev);
-
-int __init mdio_bus_init(void);
-void mdio_bus_exit(void);
-
-extern struct bus_type mdio_bus_type;
-#endif /* __PHY_H */
diff --git a/ANDROID_3.4.5/include/linux/phy_fixed.h b/ANDROID_3.4.5/include/linux/phy_fixed.h
deleted file mode 100644
index 509d8f5f..00000000
--- a/ANDROID_3.4.5/include/linux/phy_fixed.h
+++ /dev/null
@@ -1,31 +0,0 @@
-#ifndef __PHY_FIXED_H
-#define __PHY_FIXED_H
-
-struct fixed_phy_status {
-	int link;
-	int speed;
-	int duplex;
-	int pause;
-	int asym_pause;
-};
-
-#ifdef CONFIG_FIXED_PHY
-extern int fixed_phy_add(unsigned int irq, int phy_id,
-			 struct fixed_phy_status *status);
-#else
-static inline int fixed_phy_add(unsigned int irq, int phy_id,
-				struct fixed_phy_status *status)
-{
-	return -ENODEV;
-}
-#endif /* CONFIG_FIXED_PHY */
-
-/*
- * This function issued only by fixed_phy-aware drivers, no need
- * protect it with #ifdef
- */
-extern int fixed_phy_set_link_update(struct phy_device *phydev,
-			int (*link_update)(struct net_device *,
-					   struct fixed_phy_status *));
-
-#endif /* __PHY_FIXED_H */
diff --git a/ANDROID_3.4.5/include/linux/pid.h b/ANDROID_3.4.5/include/linux/pid.h
deleted file mode 100644
index b152d44f..00000000
--- a/ANDROID_3.4.5/include/linux/pid.h
+++ /dev/null
@@ -1,202 +0,0 @@
-#ifndef _LINUX_PID_H
-#define _LINUX_PID_H
-
-#include <linux/rcupdate.h>
-
-enum pid_type
-{
-	PIDTYPE_PID,
-	PIDTYPE_PGID,
-	PIDTYPE_SID,
-	PIDTYPE_MAX
-};
-
-/*
- * What is struct pid?
- *
- * A struct pid is the kernel's internal notion of a process identifier.
- * It refers to individual tasks, process groups, and sessions.  While
- * there are processes attached to it the struct pid lives in a hash
- * table, so it and then the processes that it refers to can be found
- * quickly from the numeric pid value.  The attached processes may be
- * quickly accessed by following pointers from struct pid.
- *
- * Storing pid_t values in the kernel and referring to them later has a
- * problem.  The process originally with that pid may have exited and the
- * pid allocator wrapped, and another process could have come along
- * and been assigned that pid.
- *
- * Referring to user space processes by holding a reference to struct
- * task_struct has a problem.  When the user space process exits
- * the now useless task_struct is still kept.  A task_struct plus a
- * stack consumes around 10K of low kernel memory.  More precisely
- * this is THREAD_SIZE + sizeof(struct task_struct).  By comparison
- * a struct pid is about 64 bytes.
- *
- * Holding a reference to struct pid solves both of these problems.
- * It is small so holding a reference does not consume a lot of
- * resources, and since a new struct pid is allocated when the numeric pid
- * value is reused (when pids wrap around) we don't mistakenly refer to new
- * processes.
- */
-
-
-/*
- * struct upid is used to get the id of the struct pid, as it is
- * seen in particular namespace. Later the struct pid is found with
- * find_pid_ns() using the int nr and struct pid_namespace *ns.
- */
-
-struct upid {
-	/* Try to keep pid_chain in the same cacheline as nr for find_vpid */
-	int nr;
-	struct pid_namespace *ns;
-	struct hlist_node pid_chain;
-};
-
-struct pid
-{
-	atomic_t count;
-	unsigned int level;
-	/* lists of tasks that use this pid */
-	struct hlist_head tasks[PIDTYPE_MAX];
-	struct rcu_head rcu;
-	struct upid numbers[1];
-};
-
-extern struct pid init_struct_pid;
-
-struct pid_link
-{
-	struct hlist_node node;
-	struct pid *pid;
-};
-
-static inline struct pid *get_pid(struct pid *pid)
-{
-	if (pid)
-		atomic_inc(&pid->count);
-	return pid;
-}
-
-extern void put_pid(struct pid *pid);
-extern struct task_struct *pid_task(struct pid *pid, enum pid_type);
-extern struct task_struct *get_pid_task(struct pid *pid, enum pid_type);
-
-extern struct pid *get_task_pid(struct task_struct *task, enum pid_type type);
-
-/*
- * attach_pid() and detach_pid() must be called with the tasklist_lock
- * write-held.
- */
-extern void attach_pid(struct task_struct *task, enum pid_type type,
-			struct pid *pid);
-extern void detach_pid(struct task_struct *task, enum pid_type);
-extern void change_pid(struct task_struct *task, enum pid_type,
-			struct pid *pid);
-extern void transfer_pid(struct task_struct *old, struct task_struct *new,
-			 enum pid_type);
-
-struct pid_namespace;
-extern struct pid_namespace init_pid_ns;
-
-/*
- * look up a PID in the hash table. Must be called with the tasklist_lock
- * or rcu_read_lock() held.
- *
- * find_pid_ns() finds the pid in the namespace specified
- * find_vpid() finds the pid by its virtual id, i.e. in the current namespace
- *
- * see also find_task_by_vpid() set in include/linux/sched.h
- */
-extern struct pid *find_pid_ns(int nr, struct pid_namespace *ns);
-extern struct pid *find_vpid(int nr);
-
-/*
- * Lookup a PID in the hash table, and return with it's count elevated.
- */
-extern struct pid *find_get_pid(int nr);
-extern struct pid *find_ge_pid(int nr, struct pid_namespace *);
-int next_pidmap(struct pid_namespace *pid_ns, unsigned int last);
-
-extern struct pid *alloc_pid(struct pid_namespace *ns);
-extern void free_pid(struct pid *pid);
-
-/*
- * ns_of_pid() returns the pid namespace in which the specified pid was
- * allocated.
- *
- * NOTE:
- * 	ns_of_pid() is expected to be called for a process (task) that has
- * 	an attached 'struct pid' (see attach_pid(), detach_pid()) i.e @pid
- * 	is expected to be non-NULL. If @pid is NULL, caller should handle
- * 	the resulting NULL pid-ns.
- */
-static inline struct pid_namespace *ns_of_pid(struct pid *pid)
-{
-	struct pid_namespace *ns = NULL;
-	if (pid)
-		ns = pid->numbers[pid->level].ns;
-	return ns;
-}
-
-/*
- * is_child_reaper returns true if the pid is the init process
- * of the current namespace. As this one could be checked before
- * pid_ns->child_reaper is assigned in copy_process, we check
- * with the pid number.
- */
-static inline bool is_child_reaper(struct pid *pid)
-{
-	return pid->numbers[pid->level].nr == 1;
-}
-
-/*
- * the helpers to get the pid's id seen from different namespaces
- *
- * pid_nr()    : global id, i.e. the id seen from the init namespace;
- * pid_vnr()   : virtual id, i.e. the id seen from the pid namespace of
- *               current.
- * pid_nr_ns() : id seen from the ns specified.
- *
- * see also task_xid_nr() etc in include/linux/sched.h
- */
-
-static inline pid_t pid_nr(struct pid *pid)
-{
-	pid_t nr = 0;
-	if (pid)
-		nr = pid->numbers[0].nr;
-	return nr;
-}
-
-pid_t pid_nr_ns(struct pid *pid, struct pid_namespace *ns);
-pid_t pid_vnr(struct pid *pid);
-
-#define do_each_pid_task(pid, type, task)				\
-	do {								\
-		struct hlist_node *pos___;				\
-		if ((pid) != NULL)					\
-			hlist_for_each_entry_rcu((task), pos___,	\
-				&(pid)->tasks[type], pids[type].node) {
-
-			/*
-			 * Both old and new leaders may be attached to
-			 * the same pid in the middle of de_thread().
-			 */
-#define while_each_pid_task(pid, type, task)				\
-				if (type == PIDTYPE_PID)		\
-					break;				\
-			}						\
-	} while (0)
-
-#define do_each_pid_thread(pid, type, task)				\
-	do_each_pid_task(pid, type, task) {				\
-		struct task_struct *tg___ = task;			\
-		do {
-
-#define while_each_pid_thread(pid, type, task)				\
-		} while_each_thread(tg___, task);			\
-		task = tg___;						\
-	} while_each_pid_task(pid, type, task)
-#endif /* _LINUX_PID_H */
diff --git a/ANDROID_3.4.5/include/linux/pid_namespace.h b/ANDROID_3.4.5/include/linux/pid_namespace.h
deleted file mode 100644
index b067bd8c..00000000
--- a/ANDROID_3.4.5/include/linux/pid_namespace.h
+++ /dev/null
@@ -1,95 +0,0 @@
-#ifndef _LINUX_PID_NS_H
-#define _LINUX_PID_NS_H
-
-#include <linux/sched.h>
-#include <linux/bug.h>
-#include <linux/mm.h>
-#include <linux/threads.h>
-#include <linux/nsproxy.h>
-#include <linux/kref.h>
-
-struct pidmap {
-       atomic_t nr_free;
-       void *page;
-};
-
-#define PIDMAP_ENTRIES         ((PID_MAX_LIMIT + 8*PAGE_SIZE - 1)/PAGE_SIZE/8)
-
-struct bsd_acct_struct;
-
-struct pid_namespace {
-	struct kref kref;
-	struct pidmap pidmap[PIDMAP_ENTRIES];
-	int last_pid;
-	struct task_struct *child_reaper;
-	struct kmem_cache *pid_cachep;
-	unsigned int level;
-	struct pid_namespace *parent;
-#ifdef CONFIG_PROC_FS
-	struct vfsmount *proc_mnt;
-#endif
-#ifdef CONFIG_BSD_PROCESS_ACCT
-	struct bsd_acct_struct *bacct;
-#endif
-	gid_t pid_gid;
-	int hide_pid;
-	int reboot;	/* group exit code if this pidns was rebooted */
-};
-
-extern struct pid_namespace init_pid_ns;
-
-#ifdef CONFIG_PID_NS
-static inline struct pid_namespace *get_pid_ns(struct pid_namespace *ns)
-{
-	if (ns != &init_pid_ns)
-		kref_get(&ns->kref);
-	return ns;
-}
-
-extern struct pid_namespace *copy_pid_ns(unsigned long flags, struct pid_namespace *ns);
-extern void free_pid_ns(struct kref *kref);
-extern void zap_pid_ns_processes(struct pid_namespace *pid_ns);
-extern int reboot_pid_ns(struct pid_namespace *pid_ns, int cmd);
-
-static inline void put_pid_ns(struct pid_namespace *ns)
-{
-	if (ns != &init_pid_ns)
-		kref_put(&ns->kref, free_pid_ns);
-}
-
-#else /* !CONFIG_PID_NS */
-#include <linux/err.h>
-
-static inline struct pid_namespace *get_pid_ns(struct pid_namespace *ns)
-{
-	return ns;
-}
-
-static inline struct pid_namespace *
-copy_pid_ns(unsigned long flags, struct pid_namespace *ns)
-{
-	if (flags & CLONE_NEWPID)
-		ns = ERR_PTR(-EINVAL);
-	return ns;
-}
-
-static inline void put_pid_ns(struct pid_namespace *ns)
-{
-}
-
-static inline void zap_pid_ns_processes(struct pid_namespace *ns)
-{
-	BUG();
-}
-
-static inline int reboot_pid_ns(struct pid_namespace *pid_ns, int cmd)
-{
-	return 0;
-}
-#endif /* CONFIG_PID_NS */
-
-extern struct pid_namespace *task_active_pid_ns(struct task_struct *tsk);
-void pidhash_init(void);
-void pidmap_init(void);
-
-#endif /* _LINUX_PID_NS_H */
diff --git a/ANDROID_3.4.5/include/linux/pim.h b/ANDROID_3.4.5/include/linux/pim.h
deleted file mode 100644
index 252bf664..00000000
--- a/ANDROID_3.4.5/include/linux/pim.h
+++ /dev/null
@@ -1,27 +0,0 @@
-#ifndef __LINUX_PIM_H
-#define __LINUX_PIM_H
-
-#include <asm/byteorder.h>
-
-/* Message types - V1 */
-#define PIM_V1_VERSION		cpu_to_be32(0x10000000)
-#define PIM_V1_REGISTER		1
-
-/* Message types - V2 */
-#define PIM_VERSION		2
-#define PIM_REGISTER		1
-
-#define PIM_NULL_REGISTER	cpu_to_be32(0x40000000)
-
-/* PIMv2 register message header layout (ietf-draft-idmr-pimvsm-v2-00.ps */
-struct pimreghdr
-{
-	__u8	type;
-	__u8	reserved;
-	__be16	csum;
-	__be32	flags;
-};
-
-struct sk_buff;
-extern int pim_rcv_v1(struct sk_buff *);
-#endif
diff --git a/ANDROID_3.4.5/include/linux/pinctrl/consumer.h b/ANDROID_3.4.5/include/linux/pinctrl/consumer.h
deleted file mode 100644
index 191e7268..00000000
--- a/ANDROID_3.4.5/include/linux/pinctrl/consumer.h
+++ /dev/null
@@ -1,159 +0,0 @@
-/*
- * Consumer interface the pin control subsystem
- *
- * Copyright (C) 2012 ST-Ericsson SA
- * Written on behalf of Linaro for ST-Ericsson
- * Based on bits of regulator core, gpio core and clk core
- *
- * Author: Linus Walleij <linus.walleij@linaro.org>
- *
- * License terms: GNU General Public License (GPL) version 2
- */
-#ifndef __LINUX_PINCTRL_CONSUMER_H
-#define __LINUX_PINCTRL_CONSUMER_H
-
-#include <linux/err.h>
-#include <linux/list.h>
-#include <linux/seq_file.h>
-#include "pinctrl-state.h"
-
-/* This struct is private to the core and should be regarded as a cookie */
-struct pinctrl;
-struct pinctrl_state;
-
-#ifdef CONFIG_PINCTRL
-
-/* External interface to pin control */
-extern int pinctrl_request_gpio(unsigned gpio);
-extern void pinctrl_free_gpio(unsigned gpio);
-extern int pinctrl_gpio_direction_input(unsigned gpio);
-extern int pinctrl_gpio_direction_output(unsigned gpio);
-
-extern struct pinctrl * __must_check pinctrl_get(struct device *dev);
-extern void pinctrl_put(struct pinctrl *p);
-extern struct pinctrl_state * __must_check pinctrl_lookup_state(
-							struct pinctrl *p,
-							const char *name);
-extern int pinctrl_select_state(struct pinctrl *p, struct pinctrl_state *s);
-
-#else /* !CONFIG_PINCTRL */
-
-static inline int pinctrl_request_gpio(unsigned gpio)
-{
-	return 0;
-}
-
-static inline void pinctrl_free_gpio(unsigned gpio)
-{
-}
-
-static inline int pinctrl_gpio_direction_input(unsigned gpio)
-{
-	return 0;
-}
-
-static inline int pinctrl_gpio_direction_output(unsigned gpio)
-{
-	return 0;
-}
-
-static inline struct pinctrl * __must_check pinctrl_get(struct device *dev)
-{
-	return NULL;
-}
-
-static inline void pinctrl_put(struct pinctrl *p)
-{
-}
-
-static inline struct pinctrl_state * __must_check pinctrl_lookup_state(
-							struct pinctrl *p,
-							const char *name)
-{
-	return NULL;
-}
-
-static inline int pinctrl_select_state(struct pinctrl *p,
-				       struct pinctrl_state *s)
-{
-	return 0;
-}
-
-#endif /* CONFIG_PINCTRL */
-
-static inline struct pinctrl * __must_check pinctrl_get_select(
-					struct device *dev, const char *name)
-{
-	struct pinctrl *p;
-	struct pinctrl_state *s;
-	int ret;
-
-	p = pinctrl_get(dev);
-	if (IS_ERR(p))
-		return p;
-
-	s = pinctrl_lookup_state(p, name);
-	if (IS_ERR(s)) {
-		pinctrl_put(p);
-		return ERR_PTR(PTR_ERR(s));
-	}
-
-	ret = pinctrl_select_state(p, s);
-	if (ret < 0) {
-		pinctrl_put(p);
-		return ERR_PTR(ret);
-	}
-
-	return p;
-}
-
-static inline struct pinctrl * __must_check pinctrl_get_select_default(
-					struct device *dev)
-{
-	return pinctrl_get_select(dev, PINCTRL_STATE_DEFAULT);
-}
-
-#ifdef CONFIG_PINCONF
-
-extern int pin_config_get(const char *dev_name, const char *name,
-			  unsigned long *config);
-extern int pin_config_set(const char *dev_name, const char *name,
-			  unsigned long config);
-extern int pin_config_group_get(const char *dev_name,
-				const char *pin_group,
-				unsigned long *config);
-extern int pin_config_group_set(const char *dev_name,
-				const char *pin_group,
-				unsigned long config);
-
-#else
-
-static inline int pin_config_get(const char *dev_name, const char *name,
-				 unsigned long *config)
-{
-	return 0;
-}
-
-static inline int pin_config_set(const char *dev_name, const char *name,
-				 unsigned long config)
-{
-	return 0;
-}
-
-static inline int pin_config_group_get(const char *dev_name,
-				       const char *pin_group,
-				       unsigned long *config)
-{
-	return 0;
-}
-
-static inline int pin_config_group_set(const char *dev_name,
-				       const char *pin_group,
-				       unsigned long config)
-{
-	return 0;
-}
-
-#endif
-
-#endif /* __LINUX_PINCTRL_CONSUMER_H */
diff --git a/ANDROID_3.4.5/include/linux/pinctrl/machine.h b/ANDROID_3.4.5/include/linux/pinctrl/machine.h
deleted file mode 100644
index e4d1de74..00000000
--- a/ANDROID_3.4.5/include/linux/pinctrl/machine.h
+++ /dev/null
@@ -1,167 +0,0 @@
-/*
- * Machine interface for the pinctrl subsystem.
- *
- * Copyright (C) 2011 ST-Ericsson SA
- * Written on behalf of Linaro for ST-Ericsson
- * Based on bits of regulator core, gpio core and clk core
- *
- * Author: Linus Walleij <linus.walleij@linaro.org>
- *
- * License terms: GNU General Public License (GPL) version 2
- */
-#ifndef __LINUX_PINCTRL_MACHINE_H
-#define __LINUX_PINCTRL_MACHINE_H
-
-#include <linux/bug.h>
-
-#include "pinctrl-state.h"
-
-enum pinctrl_map_type {
-	PIN_MAP_TYPE_INVALID,
-	PIN_MAP_TYPE_DUMMY_STATE,
-	PIN_MAP_TYPE_MUX_GROUP,
-	PIN_MAP_TYPE_CONFIGS_PIN,
-	PIN_MAP_TYPE_CONFIGS_GROUP,
-};
-
-/**
- * struct pinctrl_map_mux - mapping table content for MAP_TYPE_MUX_GROUP
- * @group: the name of the group whose mux function is to be configured. This
- *	field may be left NULL, and the first applicable group for the function
- *	will be used.
- * @function: the mux function to select for the group
- */
-struct pinctrl_map_mux {
-	const char *group;
-	const char *function;
-};
-
-/**
- * struct pinctrl_map_configs - mapping table content for MAP_TYPE_CONFIGS_*
- * @group_or_pin: the name of the pin or group whose configuration parameters
- *	are to be configured.
- * @configs: a pointer to an array of config parameters/values to program into
- *	hardware. Each individual pin controller defines the format and meaning
- *	of config parameters.
- * @num_configs: the number of entries in array @configs
- */
-struct pinctrl_map_configs {
-	const char *group_or_pin;
-	unsigned long *configs;
-	unsigned num_configs;
-};
-
-/**
- * struct pinctrl_map - boards/machines shall provide this map for devices
- * @dev_name: the name of the device using this specific mapping, the name
- *	must be the same as in your struct device*. If this name is set to the
- *	same name as the pin controllers own dev_name(), the map entry will be
- *	hogged by the driver itself upon registration
- * @name: the name of this specific map entry for the particular machine.
- *	This is the parameter passed to pinmux_lookup_state()
- * @type: the type of mapping table entry
- * @ctrl_dev_name: the name of the device controlling this specific mapping,
- *	the name must be the same as in your struct device*. This field is not
- *	used for PIN_MAP_TYPE_DUMMY_STATE
- * @data: Data specific to the mapping type
- */
-struct pinctrl_map {
-	const char *dev_name;
-	const char *name;
-	enum pinctrl_map_type type;
-	const char *ctrl_dev_name;
-	union {
-		struct pinctrl_map_mux mux;
-		struct pinctrl_map_configs configs;
-	} data;
-};
-
-/* Convenience macros to create mapping table entries */
-
-#define PIN_MAP_DUMMY_STATE(dev, state) \
-	{								\
-		.dev_name = dev,					\
-		.name = state,						\
-		.type = PIN_MAP_TYPE_DUMMY_STATE,			\
-	}
-
-#define PIN_MAP_MUX_GROUP(dev, state, pinctrl, grp, func)		\
-	{								\
-		.dev_name = dev,					\
-		.name = state,						\
-		.type = PIN_MAP_TYPE_MUX_GROUP,				\
-		.ctrl_dev_name = pinctrl,				\
-		.data.mux = {						\
-			.group = grp,					\
-			.function = func,				\
-		},							\
-	}
-
-#define PIN_MAP_MUX_GROUP_DEFAULT(dev, pinctrl, grp, func)		\
-	PIN_MAP_MUX_GROUP(dev, PINCTRL_STATE_DEFAULT, pinctrl, grp, func)
-
-#define PIN_MAP_MUX_GROUP_HOG(dev, state, grp, func)			\
-	PIN_MAP_MUX_GROUP(dev, state, dev, grp, func)
-
-#define PIN_MAP_MUX_GROUP_HOG_DEFAULT(dev, grp, func)			\
-	PIN_MAP_MUX_GROUP(dev, PINCTRL_STATE_DEFAULT, dev, grp, func)
-
-#define PIN_MAP_CONFIGS_PIN(dev, state, pinctrl, pin, cfgs)		\
-	{								\
-		.dev_name = dev,					\
-		.name = state,						\
-		.type = PIN_MAP_TYPE_CONFIGS_PIN,			\
-		.ctrl_dev_name = pinctrl,				\
-		.data.configs = {					\
-			.group_or_pin = pin,				\
-			.configs = cfgs,				\
-			.num_configs = ARRAY_SIZE(cfgs),		\
-		},							\
-	}
-
-#define PIN_MAP_CONFIGS_PIN_DEFAULT(dev, pinctrl, pin, cfgs)		\
-	PIN_MAP_CONFIGS_PIN(dev, PINCTRL_STATE_DEFAULT, pinctrl, pin, cfgs)
-
-#define PIN_MAP_CONFIGS_PIN_HOG(dev, state, pin, cfgs)			\
-	PIN_MAP_CONFIGS_PIN(dev, state, dev, pin, cfgs)
-
-#define PIN_MAP_CONFIGS_PIN_HOG_DEFAULT(dev, pin, cfgs)			\
-	PIN_MAP_CONFIGS_PIN(dev, PINCTRL_STATE_DEFAULT, dev, pin, cfgs)
-
-#define PIN_MAP_CONFIGS_GROUP(dev, state, pinctrl, grp, cfgs)		\
-	{								\
-		.dev_name = dev,					\
-		.name = state,						\
-		.type = PIN_MAP_TYPE_CONFIGS_GROUP,			\
-		.ctrl_dev_name = pinctrl,				\
-		.data.configs = {					\
-			.group_or_pin = grp,				\
-			.configs = cfgs,				\
-			.num_configs = ARRAY_SIZE(cfgs),		\
-		},							\
-	}
-
-#define PIN_MAP_CONFIGS_GROUP_DEFAULT(dev, pinctrl, grp, cfgs)		\
-	PIN_MAP_CONFIGS_GROUP(dev, PINCTRL_STATE_DEFAULT, pinctrl, grp, cfgs)
-
-#define PIN_MAP_CONFIGS_GROUP_HOG(dev, state, grp, cfgs)		\
-	PIN_MAP_CONFIGS_GROUP(dev, state, dev, grp, cfgs)
-
-#define PIN_MAP_CONFIGS_GROUP_HOG_DEFAULT(dev, grp, cfgs)		\
-	PIN_MAP_CONFIGS_GROUP(dev, PINCTRL_STATE_DEFAULT, dev, grp, cfgs)
-
-#ifdef CONFIG_PINCTRL
-
-extern int pinctrl_register_mappings(struct pinctrl_map const *map,
-				unsigned num_maps);
-
-#else
-
-static inline int pinctrl_register_mappings(struct pinctrl_map const *map,
-					   unsigned num_maps)
-{
-	return 0;
-}
-
-#endif /* !CONFIG_PINMUX */
-#endif
diff --git a/ANDROID_3.4.5/include/linux/pinctrl/pinconf-generic.h b/ANDROID_3.4.5/include/linux/pinctrl/pinconf-generic.h
deleted file mode 100644
index 4f0abb9f..00000000
--- a/ANDROID_3.4.5/include/linux/pinctrl/pinconf-generic.h
+++ /dev/null
@@ -1,114 +0,0 @@
-/*
- * Interface the generic pinconfig portions of the pinctrl subsystem
- *
- * Copyright (C) 2011 ST-Ericsson SA
- * Written on behalf of Linaro for ST-Ericsson
- * This interface is used in the core to keep track of pins.
- *
- * Author: Linus Walleij <linus.walleij@linaro.org>
- *
- * License terms: GNU General Public License (GPL) version 2
- */
-#ifndef __LINUX_PINCTRL_PINCONF_GENERIC_H
-#define __LINUX_PINCTRL_PINCONF_GENERIC_H
-
-/*
- * You shouldn't even be able to compile with these enums etc unless you're
- * using generic pin config. That is why this is defined out.
- */
-#ifdef CONFIG_GENERIC_PINCONF
-
-/**
- * enum pin_config_param - possible pin configuration parameters
- * @PIN_CONFIG_BIAS_DISABLE: disable any pin bias on the pin, a
- *	transition from say pull-up to pull-down implies that you disable
- *	pull-up in the process, this setting disables all biasing.
- * @PIN_CONFIG_BIAS_HIGH_IMPEDANCE: the pin will be set to a high impedance
- *	mode, also know as "third-state" (tristate) or "high-Z" or "floating".
- *	On output pins this effectively disconnects the pin, which is useful
- *	if for example some other pin is going to drive the signal connected
- *	to it for a while. Pins used for input are usually always high
- *	impedance.
- * @PIN_CONFIG_BIAS_PULL_UP: the pin will be pulled up (usually with high
- *	impedance to VDD). If the argument is != 0 pull-up is enabled,
- *	if it is 0, pull-up is disabled.
- * @PIN_CONFIG_BIAS_PULL_DOWN: the pin will be pulled down (usually with high
- *	impedance to GROUND). If the argument is != 0 pull-down is enabled,
- *	if it is 0, pull-down is disabled.
- * @PIN_CONFIG_DRIVE_PUSH_PULL: the pin will be driven actively high and
- *	low, this is the most typical case and is typically achieved with two
- *	active transistors on the output. Sending this config will enabale
- *	push-pull mode, the argument is ignored.
- * @PIN_CONFIG_DRIVE_OPEN_DRAIN: the pin will be driven with open drain (open
- *	collector) which means it is usually wired with other output ports
- *	which are then pulled up with an external resistor. Sending this
- *	config will enabale open drain mode, the argument is ignored.
- * @PIN_CONFIG_DRIVE_OPEN_SOURCE: the pin will be driven with open source
- *	(open emitter). Sending this config will enabale open drain mode, the
- *	argument is ignored.
- * @PIN_CONFIG_INPUT_SCHMITT: this will configure an input pin to run in
- *	schmitt-trigger mode. If the schmitt-trigger has adjustable hysteresis,
- *	the threshold value is given on a custom format as argument when
- *	setting pins to this mode. The argument zero turns the schmitt trigger
- *	off.
- * @PIN_CONFIG_INPUT_DEBOUNCE: this will configure the pin to debounce mode,
- *	which means it will wait for signals to settle when reading inputs. The
- *	argument gives the debounce time on a custom format. Setting the
- *	argument to zero turns debouncing off.
- * @PIN_CONFIG_POWER_SOURCE: if the pin can select between different power
- *	supplies, the argument to this parameter (on a custom format) tells
- *	the driver which alternative power source to use.
- * @PIN_CONFIG_LOW_POWER_MODE: this will configure the pin for low power
- *	operation, if several modes of operation are supported these can be
- *	passed in the argument on a custom form, else just use argument 1
- *	to indicate low power mode, argument 0 turns low power mode off.
- * @PIN_CONFIG_END: this is the last enumerator for pin configurations, if
- *	you need to pass in custom configurations to the pin controller, use
- *	PIN_CONFIG_END+1 as the base offset.
- */
-enum pin_config_param {
-	PIN_CONFIG_BIAS_DISABLE,
-	PIN_CONFIG_BIAS_HIGH_IMPEDANCE,
-	PIN_CONFIG_BIAS_PULL_UP,
-	PIN_CONFIG_BIAS_PULL_DOWN,
-	PIN_CONFIG_DRIVE_PUSH_PULL,
-	PIN_CONFIG_DRIVE_OPEN_DRAIN,
-	PIN_CONFIG_DRIVE_OPEN_SOURCE,
-	PIN_CONFIG_INPUT_SCHMITT,
-	PIN_CONFIG_INPUT_DEBOUNCE,
-	PIN_CONFIG_POWER_SOURCE,
-	PIN_CONFIG_LOW_POWER_MODE,
-	PIN_CONFIG_END = 0x7FFF,
-};
-
-/*
- * Helpful configuration macro to be used in tables etc.
- */
-#define PIN_CONF_PACKED(p, a) ((a << 16) | ((unsigned long) p & 0xffffUL))
-
-/*
- * The following inlines stuffs a configuration parameter and data value
- * into and out of an unsigned long argument, as used by the generic pin config
- * system. We put the parameter in the lower 16 bits and the argument in the
- * upper 16 bits.
- */
-
-static inline enum pin_config_param pinconf_to_config_param(unsigned long config)
-{
-	return (enum pin_config_param) (config & 0xffffUL);
-}
-
-static inline u16 pinconf_to_config_argument(unsigned long config)
-{
-	return (enum pin_config_param) ((config >> 16) & 0xffffUL);
-}
-
-static inline unsigned long pinconf_to_config_packed(enum pin_config_param param,
-						     u16 argument)
-{
-	return PIN_CONF_PACKED(param, argument);
-}
-
-#endif /* CONFIG_GENERIC_PINCONF */
-
-#endif /* __LINUX_PINCTRL_PINCONF_GENERIC_H */
diff --git a/ANDROID_3.4.5/include/linux/pinctrl/pinconf.h b/ANDROID_3.4.5/include/linux/pinctrl/pinconf.h
deleted file mode 100644
index ec431f03..00000000
--- a/ANDROID_3.4.5/include/linux/pinctrl/pinconf.h
+++ /dev/null
@@ -1,63 +0,0 @@
-/*
- * Interface the pinconfig portions of the pinctrl subsystem
- *
- * Copyright (C) 2011 ST-Ericsson SA
- * Written on behalf of Linaro for ST-Ericsson
- * This interface is used in the core to keep track of pins.
- *
- * Author: Linus Walleij <linus.walleij@linaro.org>
- *
- * License terms: GNU General Public License (GPL) version 2
- */
-#ifndef __LINUX_PINCTRL_PINCONF_H
-#define __LINUX_PINCTRL_PINCONF_H
-
-#ifdef CONFIG_PINCONF
-
-struct pinctrl_dev;
-struct seq_file;
-
-/**
- * struct pinconf_ops - pin config operations, to be implemented by
- * pin configuration capable drivers.
- * @is_generic: for pin controllers that want to use the generic interface,
- *	this flag tells the framework that it's generic.
- * @pin_config_get: get the config of a certain pin, if the requested config
- *	is not available on this controller this should return -ENOTSUPP
- *	and if it is available but disabled it should return -EINVAL
- * @pin_config_get: get the config of a certain pin
- * @pin_config_set: configure an individual pin
- * @pin_config_group_get: get configurations for an entire pin group
- * @pin_config_group_set: configure all pins in a group
- * @pin_config_dbg_show: optional debugfs display hook that will provide
- *	per-device info for a certain pin in debugfs
- * @pin_config_group_dbg_show: optional debugfs display hook that will provide
- *	per-device info for a certain group in debugfs
- */
-struct pinconf_ops {
-#ifdef CONFIG_GENERIC_PINCONF
-	bool is_generic;
-#endif
-	int (*pin_config_get) (struct pinctrl_dev *pctldev,
-			       unsigned pin,
-			       unsigned long *config);
-	int (*pin_config_set) (struct pinctrl_dev *pctldev,
-			       unsigned pin,
-			       unsigned long config);
-	int (*pin_config_group_get) (struct pinctrl_dev *pctldev,
-				     unsigned selector,
-				     unsigned long *config);
-	int (*pin_config_group_set) (struct pinctrl_dev *pctldev,
-				     unsigned selector,
-				     unsigned long config);
-	void (*pin_config_dbg_show) (struct pinctrl_dev *pctldev,
-				     struct seq_file *s,
-				     unsigned offset);
-	void (*pin_config_group_dbg_show) (struct pinctrl_dev *pctldev,
-					   struct seq_file *s,
-					   unsigned selector);
-};
-
-#endif
-
-#endif /* __LINUX_PINCTRL_PINCONF_H */
diff --git a/ANDROID_3.4.5/include/linux/pinctrl/pinctrl-state.h b/ANDROID_3.4.5/include/linux/pinctrl/pinctrl-state.h
deleted file mode 100644
index 3920e28b..00000000
--- a/ANDROID_3.4.5/include/linux/pinctrl/pinctrl-state.h
+++ /dev/null
@@ -1,6 +0,0 @@
-/*
- * Standard pin control state definitions
- */
-
-#define PINCTRL_STATE_DEFAULT "default"
-#define PINCTRL_STATE_IDLE "idle"
diff --git a/ANDROID_3.4.5/include/linux/pinctrl/pinctrl.h b/ANDROID_3.4.5/include/linux/pinctrl/pinctrl.h
deleted file mode 100644
index 4e9f0788..00000000
--- a/ANDROID_3.4.5/include/linux/pinctrl/pinctrl.h
+++ /dev/null
@@ -1,136 +0,0 @@
-/*
- * Interface the pinctrl subsystem
- *
- * Copyright (C) 2011 ST-Ericsson SA
- * Written on behalf of Linaro for ST-Ericsson
- * This interface is used in the core to keep track of pins.
- *
- * Author: Linus Walleij <linus.walleij@linaro.org>
- *
- * License terms: GNU General Public License (GPL) version 2
- */
-#ifndef __LINUX_PINCTRL_PINCTRL_H
-#define __LINUX_PINCTRL_PINCTRL_H
-
-#ifdef CONFIG_PINCTRL
-
-#include <linux/radix-tree.h>
-#include <linux/list.h>
-#include <linux/seq_file.h>
-#include "pinctrl-state.h"
-
-struct device;
-struct pinctrl_dev;
-struct pinmux_ops;
-struct pinconf_ops;
-struct gpio_chip;
-
-/**
- * struct pinctrl_pin_desc - boards/machines provide information on their
- * pins, pads or other muxable units in this struct
- * @number: unique pin number from the global pin number space
- * @name: a name for this pin
- */
-struct pinctrl_pin_desc {
-	unsigned number;
-	const char *name;
-};
-
-/* Convenience macro to define a single named or anonymous pin descriptor */
-#define PINCTRL_PIN(a, b) { .number = a, .name = b }
-#define PINCTRL_PIN_ANON(a) { .number = a }
-
-/**
- * struct pinctrl_gpio_range - each pin controller can provide subranges of
- * the GPIO number space to be handled by the controller
- * @node: list node for internal use
- * @name: a name for the chip in this range
- * @id: an ID number for the chip in this range
- * @base: base offset of the GPIO range
- * @pin_base: base pin number of the GPIO range
- * @npins: number of pins in the GPIO range, including the base number
- * @gc: an optional pointer to a gpio_chip
- */
-struct pinctrl_gpio_range {
-	struct list_head node;
-	const char *name;
-	unsigned int id;
-	unsigned int base;
-	unsigned int pin_base;
-	unsigned int npins;
-	struct gpio_chip *gc;
-};
-
-/**
- * struct pinctrl_ops - global pin control operations, to be implemented by
- * pin controller drivers.
- * @list_groups: list the number of selectable named groups available
- *	in this pinmux driver, the core will begin on 0 and call this
- *	repeatedly as long as it returns >= 0 to enumerate the groups
- * @get_group_name: return the group name of the pin group
- * @get_group_pins: return an array of pins corresponding to a certain
- *	group selector @pins, and the size of the array in @num_pins
- * @pin_dbg_show: optional debugfs display hook that will provide per-device
- *	info for a certain pin in debugfs
- */
-struct pinctrl_ops {
-	int (*list_groups) (struct pinctrl_dev *pctldev, unsigned selector);
-	const char *(*get_group_name) (struct pinctrl_dev *pctldev,
-				       unsigned selector);
-	int (*get_group_pins) (struct pinctrl_dev *pctldev,
-			       unsigned selector,
-			       const unsigned **pins,
-			       unsigned *num_pins);
-	void (*pin_dbg_show) (struct pinctrl_dev *pctldev, struct seq_file *s,
-			  unsigned offset);
-};
-
-/**
- * struct pinctrl_desc - pin controller descriptor, register this to pin
- * control subsystem
- * @name: name for the pin controller
- * @pins: an array of pin descriptors describing all the pins handled by
- *	this pin controller
- * @npins: number of descriptors in the array, usually just ARRAY_SIZE()
- *	of the pins field above
- * @pctlops: pin control operation vtable, to support global concepts like
- *	grouping of pins, this is optional.
- * @pmxops: pinmux operations vtable, if you support pinmuxing in your driver
- * @confops: pin config operations vtable, if you support pin configuration in
- *	your driver
- * @owner: module providing the pin controller, used for refcounting
- */
-struct pinctrl_desc {
-	const char *name;
-	struct pinctrl_pin_desc const *pins;
-	unsigned int npins;
-	struct pinctrl_ops *pctlops;
-	struct pinmux_ops *pmxops;
-	struct pinconf_ops *confops;
-	struct module *owner;
-};
-
-/* External interface to pin controller */
-extern struct pinctrl_dev *pinctrl_register(struct pinctrl_desc *pctldesc,
-				struct device *dev, void *driver_data);
-extern void pinctrl_unregister(struct pinctrl_dev *pctldev);
-extern bool pin_is_valid(struct pinctrl_dev *pctldev, int pin);
-extern void pinctrl_add_gpio_range(struct pinctrl_dev *pctldev,
-				struct pinctrl_gpio_range *range);
-extern void pinctrl_remove_gpio_range(struct pinctrl_dev *pctldev,
-				struct pinctrl_gpio_range *range);
-extern const char *pinctrl_dev_get_name(struct pinctrl_dev *pctldev);
-extern void *pinctrl_dev_get_drvdata(struct pinctrl_dev *pctldev);
-#else
-
-struct pinctrl_dev;
-
-/* Sufficiently stupid default functions when pinctrl is not in use */
-static inline bool pin_is_valid(struct pinctrl_dev *pctldev, int pin)
-{
-	return pin >= 0;
-}
-
-#endif /* !CONFIG_PINCTRL */
-
-#endif /* __LINUX_PINCTRL_PINCTRL_H */
diff --git a/ANDROID_3.4.5/include/linux/pinctrl/pinmux.h b/ANDROID_3.4.5/include/linux/pinctrl/pinmux.h
deleted file mode 100644
index 47e9237e..00000000
--- a/ANDROID_3.4.5/include/linux/pinctrl/pinmux.h
+++ /dev/null
@@ -1,90 +0,0 @@
-/*
- * Interface the pinmux subsystem
- *
- * Copyright (C) 2011 ST-Ericsson SA
- * Written on behalf of Linaro for ST-Ericsson
- * Based on bits of regulator core, gpio core and clk core
- *
- * Author: Linus Walleij <linus.walleij@linaro.org>
- *
- * License terms: GNU General Public License (GPL) version 2
- */
-#ifndef __LINUX_PINCTRL_PINMUX_H
-#define __LINUX_PINCTRL_PINMUX_H
-
-#include <linux/list.h>
-#include <linux/seq_file.h>
-#include "pinctrl.h"
-
-#ifdef CONFIG_PINMUX
-
-struct pinctrl_dev;
-
-/**
- * struct pinmux_ops - pinmux operations, to be implemented by pin controller
- * drivers that support pinmuxing
- * @request: called by the core to see if a certain pin can be made available
- *	available for muxing. This is called by the core to acquire the pins
- *	before selecting any actual mux setting across a function. The driver
- *	is allowed to answer "no" by returning a negative error code
- * @free: the reverse function of the request() callback, frees a pin after
- *	being requested
- * @list_functions: list the number of selectable named functions available
- *	in this pinmux driver, the core will begin on 0 and call this
- *	repeatedly as long as it returns >= 0 to enumerate mux settings
- * @get_function_name: return the function name of the muxing selector,
- *	called by the core to figure out which mux setting it shall map a
- *	certain device to
- * @get_function_groups: return an array of groups names (in turn
- *	referencing pins) connected to a certain function selector. The group
- *	name can be used with the generic @pinctrl_ops to retrieve the
- *	actual pins affected. The applicable groups will be returned in
- *	@groups and the number of groups in @num_groups
- * @enable: enable a certain muxing function with a certain pin group. The
- *	driver does not need to figure out whether enabling this function
- *	conflicts some other use of the pins in that group, such collisions
- *	are handled by the pinmux subsystem. The @func_selector selects a
- *	certain function whereas @group_selector selects a certain set of pins
- *	to be used. On simple controllers the latter argument may be ignored
- * @disable: disable a certain muxing selector with a certain pin group
- * @gpio_request_enable: requests and enables GPIO on a certain pin.
- *	Implement this only if you can mux every pin individually as GPIO. The
- *	affected GPIO range is passed along with an offset(pin number) into that
- *	specific GPIO range - function selectors and pin groups are orthogonal
- *	to this, the core will however make sure the pins do not collide.
- * @gpio_disable_free: free up GPIO muxing on a certain pin, the reverse of
- *	@gpio_request_enable
- * @gpio_set_direction: Since controllers may need different configurations
- *	depending on whether the GPIO is configured as input or output,
- *	a direction selector function may be implemented as a backing
- *	to the GPIO controllers that need pin muxing.
- */
-struct pinmux_ops {
-	int (*request) (struct pinctrl_dev *pctldev, unsigned offset);
-	int (*free) (struct pinctrl_dev *pctldev, unsigned offset);
-	int (*list_functions) (struct pinctrl_dev *pctldev, unsigned selector);
-	const char *(*get_function_name) (struct pinctrl_dev *pctldev,
-					  unsigned selector);
-	int (*get_function_groups) (struct pinctrl_dev *pctldev,
-				  unsigned selector,
-				  const char * const **groups,
-				  unsigned * const num_groups);
-	int (*enable) (struct pinctrl_dev *pctldev, unsigned func_selector,
-		       unsigned group_selector);
-	void (*disable) (struct pinctrl_dev *pctldev, unsigned func_selector,
-			 unsigned group_selector);
-	int (*gpio_request_enable) (struct pinctrl_dev *pctldev,
-				    struct pinctrl_gpio_range *range,
-				    unsigned offset);
-	void (*gpio_disable_free) (struct pinctrl_dev *pctldev,
-				   struct pinctrl_gpio_range *range,
-				   unsigned offset);
-	int (*gpio_set_direction) (struct pinctrl_dev *pctldev,
-				   struct pinctrl_gpio_range *range,
-				   unsigned offset,
-				   bool input);
-};
-
-#endif /* CONFIG_PINMUX */
-
-#endif /* __LINUX_PINCTRL_PINMUX_H */
diff --git a/ANDROID_3.4.5/include/linux/pipe_fs_i.h b/ANDROID_3.4.5/include/linux/pipe_fs_i.h
deleted file mode 100644
index e1ac1ce1..00000000
--- a/ANDROID_3.4.5/include/linux/pipe_fs_i.h
+++ /dev/null
@@ -1,165 +0,0 @@
-#ifndef _LINUX_PIPE_FS_I_H
-#define _LINUX_PIPE_FS_I_H
-
-#define PIPE_DEF_BUFFERS	16
-
-#define PIPE_BUF_FLAG_LRU	0x01	/* page is on the LRU */
-#define PIPE_BUF_FLAG_ATOMIC	0x02	/* was atomically mapped */
-#define PIPE_BUF_FLAG_GIFT	0x04	/* page is a gift */
-#define PIPE_BUF_FLAG_PACKET	0x08	/* read() as a packet */
-
-/**
- *	struct pipe_buffer - a linux kernel pipe buffer
- *	@page: the page containing the data for the pipe buffer
- *	@offset: offset of data inside the @page
- *	@len: length of data inside the @page
- *	@ops: operations associated with this buffer. See @pipe_buf_operations.
- *	@flags: pipe buffer flags. See above.
- *	@private: private data owned by the ops.
- **/
-struct pipe_buffer {
-	struct page *page;
-	unsigned int offset, len;
-	const struct pipe_buf_operations *ops;
-	unsigned int flags;
-	unsigned long private;
-};
-
-/**
- *	struct pipe_inode_info - a linux kernel pipe
- *	@wait: reader/writer wait point in case of empty/full pipe
- *	@nrbufs: the number of non-empty pipe buffers in this pipe
- *	@buffers: total number of buffers (should be a power of 2)
- *	@curbuf: the current pipe buffer entry
- *	@tmp_page: cached released page
- *	@readers: number of current readers of this pipe
- *	@writers: number of current writers of this pipe
- *	@waiting_writers: number of writers blocked waiting for room
- *	@r_counter: reader counter
- *	@w_counter: writer counter
- *	@fasync_readers: reader side fasync
- *	@fasync_writers: writer side fasync
- *	@inode: inode this pipe is attached to
- *	@bufs: the circular array of pipe buffers
- **/
-struct pipe_inode_info {
-	wait_queue_head_t wait;
-	unsigned int nrbufs, curbuf, buffers;
-	unsigned int readers;
-	unsigned int writers;
-	unsigned int waiting_writers;
-	unsigned int r_counter;
-	unsigned int w_counter;
-	struct page *tmp_page;
-	struct fasync_struct *fasync_readers;
-	struct fasync_struct *fasync_writers;
-	struct inode *inode;
-	struct pipe_buffer *bufs;
-};
-
-/*
- * Note on the nesting of these functions:
- *
- * ->confirm()
- *	->steal()
- *	...
- *	->map()
- *	...
- *	->unmap()
- *
- * That is, ->map() must be called on a confirmed buffer,
- * same goes for ->steal(). See below for the meaning of each
- * operation. Also see kerneldoc in fs/pipe.c for the pipe
- * and generic variants of these hooks.
- */
-struct pipe_buf_operations {
-	/*
-	 * This is set to 1, if the generic pipe read/write may coalesce
-	 * data into an existing buffer. If this is set to 0, a new pipe
-	 * page segment is always used for new data.
-	 */
-	int can_merge;
-
-	/*
-	 * ->map() returns a virtual address mapping of the pipe buffer.
-	 * The last integer flag reflects whether this should be an atomic
-	 * mapping or not. The atomic map is faster, however you can't take
-	 * page faults before calling ->unmap() again. So if you need to eg
-	 * access user data through copy_to/from_user(), then you must get
-	 * a non-atomic map. ->map() uses the KM_USER0 atomic slot for
-	 * atomic maps, so you can't map more than one pipe_buffer at once
-	 * and you have to be careful if mapping another page as source
-	 * or destination for a copy (IOW, it has to use something else
-	 * than KM_USER0).
-	 */
-	void * (*map)(struct pipe_inode_info *, struct pipe_buffer *, int);
-
-	/*
-	 * Undoes ->map(), finishes the virtual mapping of the pipe buffer.
-	 */
-	void (*unmap)(struct pipe_inode_info *, struct pipe_buffer *, void *);
-
-	/*
-	 * ->confirm() verifies that the data in the pipe buffer is there
-	 * and that the contents are good. If the pages in the pipe belong
-	 * to a file system, we may need to wait for IO completion in this
-	 * hook. Returns 0 for good, or a negative error value in case of
-	 * error.
-	 */
-	int (*confirm)(struct pipe_inode_info *, struct pipe_buffer *);
-
-	/*
-	 * When the contents of this pipe buffer has been completely
-	 * consumed by a reader, ->release() is called.
-	 */
-	void (*release)(struct pipe_inode_info *, struct pipe_buffer *);
-
-	/*
-	 * Attempt to take ownership of the pipe buffer and its contents.
-	 * ->steal() returns 0 for success, in which case the contents
-	 * of the pipe (the buf->page) is locked and now completely owned
-	 * by the caller. The page may then be transferred to a different
-	 * mapping, the most often used case is insertion into different
-	 * file address space cache.
-	 */
-	int (*steal)(struct pipe_inode_info *, struct pipe_buffer *);
-
-	/*
-	 * Get a reference to the pipe buffer.
-	 */
-	void (*get)(struct pipe_inode_info *, struct pipe_buffer *);
-};
-
-/* Differs from PIPE_BUF in that PIPE_SIZE is the length of the actual
-   memory allocation, whereas PIPE_BUF makes atomicity guarantees.  */
-#define PIPE_SIZE		PAGE_SIZE
-
-/* Pipe lock and unlock operations */
-void pipe_lock(struct pipe_inode_info *);
-void pipe_unlock(struct pipe_inode_info *);
-void pipe_double_lock(struct pipe_inode_info *, struct pipe_inode_info *);
-
-extern unsigned int pipe_max_size, pipe_min_size;
-int pipe_proc_fn(struct ctl_table *, int, void __user *, size_t *, loff_t *);
-
-
-/* Drop the inode semaphore and wait for a pipe event, atomically */
-void pipe_wait(struct pipe_inode_info *pipe);
-
-struct pipe_inode_info * alloc_pipe_info(struct inode * inode);
-void free_pipe_info(struct inode * inode);
-void __free_pipe_info(struct pipe_inode_info *);
-
-/* Generic pipe buffer ops functions */
-void *generic_pipe_buf_map(struct pipe_inode_info *, struct pipe_buffer *, int);
-void generic_pipe_buf_unmap(struct pipe_inode_info *, struct pipe_buffer *, void *);
-void generic_pipe_buf_get(struct pipe_inode_info *, struct pipe_buffer *);
-int generic_pipe_buf_confirm(struct pipe_inode_info *, struct pipe_buffer *);
-int generic_pipe_buf_steal(struct pipe_inode_info *, struct pipe_buffer *);
-void generic_pipe_buf_release(struct pipe_inode_info *, struct pipe_buffer *);
-
-/* for F_SETPIPE_SZ and F_GETPIPE_SZ */
-long pipe_fcntl(struct file *, unsigned int, unsigned long arg);
-struct pipe_inode_info *get_pipe_info(struct file *file);
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/pkt_cls.h b/ANDROID_3.4.5/include/linux/pkt_cls.h
deleted file mode 100644
index defbde20..00000000
--- a/ANDROID_3.4.5/include/linux/pkt_cls.h
+++ /dev/null
@@ -1,467 +0,0 @@
-#ifndef __LINUX_PKT_CLS_H
-#define __LINUX_PKT_CLS_H
-
-#include <linux/types.h>
-#include <linux/pkt_sched.h>
-
-/* I think i could have done better macros ; for now this is stolen from
- * some arch/mips code - jhs
-*/
-#define _TC_MAKE32(x) ((x))
-
-#define _TC_MAKEMASK1(n) (_TC_MAKE32(1) << _TC_MAKE32(n))
-#define _TC_MAKEMASK(v,n) (_TC_MAKE32((_TC_MAKE32(1)<<(v))-1) << _TC_MAKE32(n))
-#define _TC_MAKEVALUE(v,n) (_TC_MAKE32(v) << _TC_MAKE32(n))
-#define _TC_GETVALUE(v,n,m) ((_TC_MAKE32(v) & _TC_MAKE32(m)) >> _TC_MAKE32(n))
-
-/* verdict bit breakdown 
- *
-bit 0: when set -> this packet has been munged already
-
-bit 1: when set -> It is ok to munge this packet
-
-bit 2,3,4,5: Reclassify counter - sort of reverse TTL - if exceeded
-assume loop
-
-bit 6,7: Where this packet was last seen 
-0: Above the transmit example at the socket level
-1: on the Ingress
-2: on the Egress
-
-bit 8: when set --> Request not to classify on ingress. 
-
-bits 9,10,11: redirect counter -  redirect TTL. Loop avoidance
-
- *
- * */
-
-#define TC_MUNGED          _TC_MAKEMASK1(0)
-#define SET_TC_MUNGED(v)   ( TC_MUNGED | (v & ~TC_MUNGED))
-#define CLR_TC_MUNGED(v)   ( v & ~TC_MUNGED)
-
-#define TC_OK2MUNGE        _TC_MAKEMASK1(1)
-#define SET_TC_OK2MUNGE(v)   ( TC_OK2MUNGE | (v & ~TC_OK2MUNGE))
-#define CLR_TC_OK2MUNGE(v)   ( v & ~TC_OK2MUNGE)
-
-#define S_TC_VERD          _TC_MAKE32(2)
-#define M_TC_VERD          _TC_MAKEMASK(4,S_TC_VERD)
-#define G_TC_VERD(x)       _TC_GETVALUE(x,S_TC_VERD,M_TC_VERD)
-#define V_TC_VERD(x)       _TC_MAKEVALUE(x,S_TC_VERD)
-#define SET_TC_VERD(v,n)   ((V_TC_VERD(n)) | (v & ~M_TC_VERD))
-
-#define S_TC_FROM          _TC_MAKE32(6)
-#define M_TC_FROM          _TC_MAKEMASK(2,S_TC_FROM)
-#define G_TC_FROM(x)       _TC_GETVALUE(x,S_TC_FROM,M_TC_FROM)
-#define V_TC_FROM(x)       _TC_MAKEVALUE(x,S_TC_FROM)
-#define SET_TC_FROM(v,n)   ((V_TC_FROM(n)) | (v & ~M_TC_FROM))
-#define AT_STACK	0x0
-#define AT_INGRESS	0x1
-#define AT_EGRESS	0x2
-
-#define TC_NCLS          _TC_MAKEMASK1(8)
-#define SET_TC_NCLS(v)   ( TC_NCLS | (v & ~TC_NCLS))
-#define CLR_TC_NCLS(v)   ( v & ~TC_NCLS)
-
-#define S_TC_RTTL          _TC_MAKE32(9)
-#define M_TC_RTTL          _TC_MAKEMASK(3,S_TC_RTTL)
-#define G_TC_RTTL(x)       _TC_GETVALUE(x,S_TC_RTTL,M_TC_RTTL)
-#define V_TC_RTTL(x)       _TC_MAKEVALUE(x,S_TC_RTTL)
-#define SET_TC_RTTL(v,n)   ((V_TC_RTTL(n)) | (v & ~M_TC_RTTL))
-
-#define S_TC_AT          _TC_MAKE32(12)
-#define M_TC_AT          _TC_MAKEMASK(2,S_TC_AT)
-#define G_TC_AT(x)       _TC_GETVALUE(x,S_TC_AT,M_TC_AT)
-#define V_TC_AT(x)       _TC_MAKEVALUE(x,S_TC_AT)
-#define SET_TC_AT(v,n)   ((V_TC_AT(n)) | (v & ~M_TC_AT))
-
-/* Action attributes */
-enum {
-	TCA_ACT_UNSPEC,
-	TCA_ACT_KIND,
-	TCA_ACT_OPTIONS,
-	TCA_ACT_INDEX,
-	TCA_ACT_STATS,
-	__TCA_ACT_MAX
-};
-
-#define TCA_ACT_MAX __TCA_ACT_MAX
-#define TCA_OLD_COMPAT (TCA_ACT_MAX+1)
-#define TCA_ACT_MAX_PRIO 32
-#define TCA_ACT_BIND	1
-#define TCA_ACT_NOBIND	0
-#define TCA_ACT_UNBIND	1
-#define TCA_ACT_NOUNBIND	0
-#define TCA_ACT_REPLACE		1
-#define TCA_ACT_NOREPLACE	0
-#define MAX_REC_LOOP 4
-#define MAX_RED_LOOP 4
-
-#define TC_ACT_UNSPEC	(-1)
-#define TC_ACT_OK		0
-#define TC_ACT_RECLASSIFY	1
-#define TC_ACT_SHOT		2
-#define TC_ACT_PIPE		3
-#define TC_ACT_STOLEN		4
-#define TC_ACT_QUEUED		5
-#define TC_ACT_REPEAT		6
-#define TC_ACT_JUMP		0x10000000
-
-/* Action type identifiers*/
-enum {
-	TCA_ID_UNSPEC=0,
-	TCA_ID_POLICE=1,
-	/* other actions go here */
-	__TCA_ID_MAX=255
-};
-
-#define TCA_ID_MAX __TCA_ID_MAX
-
-struct tc_police {
-	__u32			index;
-	int			action;
-#define TC_POLICE_UNSPEC	TC_ACT_UNSPEC
-#define TC_POLICE_OK		TC_ACT_OK
-#define TC_POLICE_RECLASSIFY	TC_ACT_RECLASSIFY
-#define TC_POLICE_SHOT		TC_ACT_SHOT
-#define TC_POLICE_PIPE		TC_ACT_PIPE
-
-	__u32			limit;
-	__u32			burst;
-	__u32			mtu;
-	struct tc_ratespec	rate;
-	struct tc_ratespec	peakrate;
-	int 			refcnt;
-	int 			bindcnt;
-	__u32			capab;
-};
-
-struct tcf_t {
-	__u64   install;
-	__u64   lastuse;
-	__u64   expires;
-};
-
-struct tc_cnt {
-	int                   refcnt; 
-	int                   bindcnt;
-};
-
-#define tc_gen \
-	__u32                 index; \
-	__u32                 capab; \
-	int                   action; \
-	int                   refcnt; \
-	int                   bindcnt
-
-enum {
-	TCA_POLICE_UNSPEC,
-	TCA_POLICE_TBF,
-	TCA_POLICE_RATE,
-	TCA_POLICE_PEAKRATE,
-	TCA_POLICE_AVRATE,
-	TCA_POLICE_RESULT,
-	__TCA_POLICE_MAX
-#define TCA_POLICE_RESULT TCA_POLICE_RESULT
-};
-
-#define TCA_POLICE_MAX (__TCA_POLICE_MAX - 1)
-
-/* U32 filters */
-
-#define TC_U32_HTID(h) ((h)&0xFFF00000)
-#define TC_U32_USERHTID(h) (TC_U32_HTID(h)>>20)
-#define TC_U32_HASH(h) (((h)>>12)&0xFF)
-#define TC_U32_NODE(h) ((h)&0xFFF)
-#define TC_U32_KEY(h) ((h)&0xFFFFF)
-#define TC_U32_UNSPEC	0
-#define TC_U32_ROOT	(0xFFF00000)
-
-enum {
-	TCA_U32_UNSPEC,
-	TCA_U32_CLASSID,
-	TCA_U32_HASH,
-	TCA_U32_LINK,
-	TCA_U32_DIVISOR,
-	TCA_U32_SEL,
-	TCA_U32_POLICE,
-	TCA_U32_ACT,   
-	TCA_U32_INDEV,
-	TCA_U32_PCNT,
-	TCA_U32_MARK,
-	__TCA_U32_MAX
-};
-
-#define TCA_U32_MAX (__TCA_U32_MAX - 1)
-
-struct tc_u32_key {
-	__be32		mask;
-	__be32		val;
-	int		off;
-	int		offmask;
-};
-
-struct tc_u32_sel {
-	unsigned char		flags;
-	unsigned char		offshift;
-	unsigned char		nkeys;
-
-	__be16			offmask;
-	__u16			off;
-	short			offoff;
-
-	short			hoff;
-	__be32			hmask;
-	struct tc_u32_key	keys[0];
-};
-
-struct tc_u32_mark {
-	__u32		val;
-	__u32		mask;
-	__u32		success;
-};
-
-struct tc_u32_pcnt {
-	__u64 rcnt;
-	__u64 rhit;
-	__u64 kcnts[0];
-};
-
-/* Flags */
-
-#define TC_U32_TERMINAL		1
-#define TC_U32_OFFSET		2
-#define TC_U32_VAROFFSET	4
-#define TC_U32_EAT		8
-
-#define TC_U32_MAXDEPTH 8
-
-
-/* RSVP filter */
-
-enum {
-	TCA_RSVP_UNSPEC,
-	TCA_RSVP_CLASSID,
-	TCA_RSVP_DST,
-	TCA_RSVP_SRC,
-	TCA_RSVP_PINFO,
-	TCA_RSVP_POLICE,
-	TCA_RSVP_ACT,
-	__TCA_RSVP_MAX
-};
-
-#define TCA_RSVP_MAX (__TCA_RSVP_MAX - 1 )
-
-struct tc_rsvp_gpi {
-	__u32	key;
-	__u32	mask;
-	int	offset;
-};
-
-struct tc_rsvp_pinfo {
-	struct tc_rsvp_gpi dpi;
-	struct tc_rsvp_gpi spi;
-	__u8	protocol;
-	__u8	tunnelid;
-	__u8	tunnelhdr;
-	__u8	pad;
-};
-
-/* ROUTE filter */
-
-enum {
-	TCA_ROUTE4_UNSPEC,
-	TCA_ROUTE4_CLASSID,
-	TCA_ROUTE4_TO,
-	TCA_ROUTE4_FROM,
-	TCA_ROUTE4_IIF,
-	TCA_ROUTE4_POLICE,
-	TCA_ROUTE4_ACT,
-	__TCA_ROUTE4_MAX
-};
-
-#define TCA_ROUTE4_MAX (__TCA_ROUTE4_MAX - 1)
-
-
-/* FW filter */
-
-enum {
-	TCA_FW_UNSPEC,
-	TCA_FW_CLASSID,
-	TCA_FW_POLICE,
-	TCA_FW_INDEV, /*  used by CONFIG_NET_CLS_IND */
-	TCA_FW_ACT, /* used by CONFIG_NET_CLS_ACT */
-	TCA_FW_MASK,
-	__TCA_FW_MAX
-};
-
-#define TCA_FW_MAX (__TCA_FW_MAX - 1)
-
-/* TC index filter */
-
-enum {
-	TCA_TCINDEX_UNSPEC,
-	TCA_TCINDEX_HASH,
-	TCA_TCINDEX_MASK,
-	TCA_TCINDEX_SHIFT,
-	TCA_TCINDEX_FALL_THROUGH,
-	TCA_TCINDEX_CLASSID,
-	TCA_TCINDEX_POLICE,
-	TCA_TCINDEX_ACT,
-	__TCA_TCINDEX_MAX
-};
-
-#define TCA_TCINDEX_MAX     (__TCA_TCINDEX_MAX - 1)
-
-/* Flow filter */
-
-enum {
-	FLOW_KEY_SRC,
-	FLOW_KEY_DST,
-	FLOW_KEY_PROTO,
-	FLOW_KEY_PROTO_SRC,
-	FLOW_KEY_PROTO_DST,
-	FLOW_KEY_IIF,
-	FLOW_KEY_PRIORITY,
-	FLOW_KEY_MARK,
-	FLOW_KEY_NFCT,
-	FLOW_KEY_NFCT_SRC,
-	FLOW_KEY_NFCT_DST,
-	FLOW_KEY_NFCT_PROTO_SRC,
-	FLOW_KEY_NFCT_PROTO_DST,
-	FLOW_KEY_RTCLASSID,
-	FLOW_KEY_SKUID,
-	FLOW_KEY_SKGID,
-	FLOW_KEY_VLAN_TAG,
-	FLOW_KEY_RXHASH,
-	__FLOW_KEY_MAX,
-};
-
-#define FLOW_KEY_MAX	(__FLOW_KEY_MAX - 1)
-
-enum {
-	FLOW_MODE_MAP,
-	FLOW_MODE_HASH,
-};
-
-enum {
-	TCA_FLOW_UNSPEC,
-	TCA_FLOW_KEYS,
-	TCA_FLOW_MODE,
-	TCA_FLOW_BASECLASS,
-	TCA_FLOW_RSHIFT,
-	TCA_FLOW_ADDEND,
-	TCA_FLOW_MASK,
-	TCA_FLOW_XOR,
-	TCA_FLOW_DIVISOR,
-	TCA_FLOW_ACT,
-	TCA_FLOW_POLICE,
-	TCA_FLOW_EMATCHES,
-	TCA_FLOW_PERTURB,
-	__TCA_FLOW_MAX
-};
-
-#define TCA_FLOW_MAX	(__TCA_FLOW_MAX - 1)
-
-/* Basic filter */
-
-enum {
-	TCA_BASIC_UNSPEC,
-	TCA_BASIC_CLASSID,
-	TCA_BASIC_EMATCHES,
-	TCA_BASIC_ACT,
-	TCA_BASIC_POLICE,
-	__TCA_BASIC_MAX
-};
-
-#define TCA_BASIC_MAX (__TCA_BASIC_MAX - 1)
-
-
-/* Cgroup classifier */
-
-enum {
-	TCA_CGROUP_UNSPEC,
-	TCA_CGROUP_ACT,
-	TCA_CGROUP_POLICE,
-	TCA_CGROUP_EMATCHES,
-	__TCA_CGROUP_MAX,
-};
-
-#define TCA_CGROUP_MAX (__TCA_CGROUP_MAX - 1)
-
-/* Extended Matches */
-
-struct tcf_ematch_tree_hdr {
-	__u16		nmatches;
-	__u16		progid;
-};
-
-enum {
-	TCA_EMATCH_TREE_UNSPEC,
-	TCA_EMATCH_TREE_HDR,
-	TCA_EMATCH_TREE_LIST,
-	__TCA_EMATCH_TREE_MAX
-};
-#define TCA_EMATCH_TREE_MAX (__TCA_EMATCH_TREE_MAX - 1)
-
-struct tcf_ematch_hdr {
-	__u16		matchid;
-	__u16		kind;
-	__u16		flags;
-	__u16		pad; /* currently unused */
-};
-
-/*  0                   1
- *  0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 
- * +-----------------------+-+-+---+
- * |         Unused        |S|I| R |
- * +-----------------------+-+-+---+
- *
- * R(2) ::= relation to next ematch
- *          where: 0 0 END (last ematch)
- *                 0 1 AND
- *                 1 0 OR
- *                 1 1 Unused (invalid)
- * I(1) ::= invert result
- * S(1) ::= simple payload
- */
-#define TCF_EM_REL_END	0
-#define TCF_EM_REL_AND	(1<<0)
-#define TCF_EM_REL_OR	(1<<1)
-#define TCF_EM_INVERT	(1<<2)
-#define TCF_EM_SIMPLE	(1<<3)
-
-#define TCF_EM_REL_MASK	3
-#define TCF_EM_REL_VALID(v) (((v) & TCF_EM_REL_MASK) != TCF_EM_REL_MASK)
-
-enum {
-	TCF_LAYER_LINK,
-	TCF_LAYER_NETWORK,
-	TCF_LAYER_TRANSPORT,
-	__TCF_LAYER_MAX
-};
-#define TCF_LAYER_MAX (__TCF_LAYER_MAX - 1)
-
-/* Ematch type assignments
- *   1..32767		Reserved for ematches inside kernel tree
- *   32768..65535	Free to use, not reliable
- */
-#define	TCF_EM_CONTAINER	0
-#define	TCF_EM_CMP		1
-#define	TCF_EM_NBYTE		2
-#define	TCF_EM_U32		3
-#define	TCF_EM_META		4
-#define	TCF_EM_TEXT		5
-#define        TCF_EM_VLAN		6
-#define	TCF_EM_MAX		6
-
-enum {
-	TCF_EM_PROG_TC
-};
-
-enum {
-	TCF_EM_OPND_EQ,
-	TCF_EM_OPND_GT,
-	TCF_EM_OPND_LT
-};
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/pkt_sched.h b/ANDROID_3.4.5/include/linux/pkt_sched.h
deleted file mode 100644
index 410b33d0..00000000
--- a/ANDROID_3.4.5/include/linux/pkt_sched.h
+++ /dev/null
@@ -1,657 +0,0 @@
-#ifndef __LINUX_PKT_SCHED_H
-#define __LINUX_PKT_SCHED_H
-
-#include <linux/types.h>
-
-/* Logical priority bands not depending on specific packet scheduler.
-   Every scheduler will map them to real traffic classes, if it has
-   no more precise mechanism to classify packets.
-
-   These numbers have no special meaning, though their coincidence
-   with obsolete IPv6 values is not occasional :-). New IPv6 drafts
-   preferred full anarchy inspired by diffserv group.
-
-   Note: TC_PRIO_BESTEFFORT does not mean that it is the most unhappy
-   class, actually, as rule it will be handled with more care than
-   filler or even bulk.
- */
-
-#define TC_PRIO_BESTEFFORT		0
-#define TC_PRIO_FILLER			1
-#define TC_PRIO_BULK			2
-#define TC_PRIO_INTERACTIVE_BULK	4
-#define TC_PRIO_INTERACTIVE		6
-#define TC_PRIO_CONTROL			7
-
-#define TC_PRIO_MAX			15
-
-/* Generic queue statistics, available for all the elements.
-   Particular schedulers may have also their private records.
- */
-
-struct tc_stats {
-	__u64	bytes;			/* Number of enqueued bytes */
-	__u32	packets;		/* Number of enqueued packets	*/
-	__u32	drops;			/* Packets dropped because of lack of resources */
-	__u32	overlimits;		/* Number of throttle events when this
-					 * flow goes out of allocated bandwidth */
-	__u32	bps;			/* Current flow byte rate */
-	__u32	pps;			/* Current flow packet rate */
-	__u32	qlen;
-	__u32	backlog;
-};
-
-struct tc_estimator {
-	signed char	interval;
-	unsigned char	ewma_log;
-};
-
-/* "Handles"
-   ---------
-
-    All the traffic control objects have 32bit identifiers, or "handles".
-
-    They can be considered as opaque numbers from user API viewpoint,
-    but actually they always consist of two fields: major and
-    minor numbers, which are interpreted by kernel specially,
-    that may be used by applications, though not recommended.
-
-    F.e. qdisc handles always have minor number equal to zero,
-    classes (or flows) have major equal to parent qdisc major, and
-    minor uniquely identifying class inside qdisc.
-
-    Macros to manipulate handles:
- */
-
-#define TC_H_MAJ_MASK (0xFFFF0000U)
-#define TC_H_MIN_MASK (0x0000FFFFU)
-#define TC_H_MAJ(h) ((h)&TC_H_MAJ_MASK)
-#define TC_H_MIN(h) ((h)&TC_H_MIN_MASK)
-#define TC_H_MAKE(maj,min) (((maj)&TC_H_MAJ_MASK)|((min)&TC_H_MIN_MASK))
-
-#define TC_H_UNSPEC	(0U)
-#define TC_H_ROOT	(0xFFFFFFFFU)
-#define TC_H_INGRESS    (0xFFFFFFF1U)
-
-struct tc_ratespec {
-	unsigned char	cell_log;
-	unsigned char	__reserved;
-	unsigned short	overhead;
-	short		cell_align;
-	unsigned short	mpu;
-	__u32		rate;
-};
-
-#define TC_RTAB_SIZE	1024
-
-struct tc_sizespec {
-	unsigned char	cell_log;
-	unsigned char	size_log;
-	short		cell_align;
-	int		overhead;
-	unsigned int	linklayer;
-	unsigned int	mpu;
-	unsigned int	mtu;
-	unsigned int	tsize;
-};
-
-enum {
-	TCA_STAB_UNSPEC,
-	TCA_STAB_BASE,
-	TCA_STAB_DATA,
-	__TCA_STAB_MAX
-};
-
-#define TCA_STAB_MAX (__TCA_STAB_MAX - 1)
-
-/* FIFO section */
-
-struct tc_fifo_qopt {
-	__u32	limit;	/* Queue length: bytes for bfifo, packets for pfifo */
-};
-
-/* PRIO section */
-
-#define TCQ_PRIO_BANDS	16
-#define TCQ_MIN_PRIO_BANDS 2
-
-struct tc_prio_qopt {
-	int	bands;			/* Number of bands */
-	__u8	priomap[TC_PRIO_MAX+1];	/* Map: logical priority -> PRIO band */
-};
-
-/* MULTIQ section */
-
-struct tc_multiq_qopt {
-	__u16	bands;			/* Number of bands */
-	__u16	max_bands;		/* Maximum number of queues */
-};
-
-/* PLUG section */
-
-#define TCQ_PLUG_BUFFER                0
-#define TCQ_PLUG_RELEASE_ONE           1
-#define TCQ_PLUG_RELEASE_INDEFINITE    2
-#define TCQ_PLUG_LIMIT                 3
-
-struct tc_plug_qopt {
-	/* TCQ_PLUG_BUFFER: Inset a plug into the queue and
-	 *  buffer any incoming packets
-	 * TCQ_PLUG_RELEASE_ONE: Dequeue packets from queue head
-	 *   to beginning of the next plug.
-	 * TCQ_PLUG_RELEASE_INDEFINITE: Dequeue all packets from queue.
-	 *   Stop buffering packets until the next TCQ_PLUG_BUFFER
-	 *   command is received (just act as a pass-thru queue).
-	 * TCQ_PLUG_LIMIT: Increase/decrease queue size
-	 */
-	int             action;
-	__u32           limit;
-};
-
-/* TBF section */
-
-struct tc_tbf_qopt {
-	struct tc_ratespec rate;
-	struct tc_ratespec peakrate;
-	__u32		limit;
-	__u32		buffer;
-	__u32		mtu;
-};
-
-enum {
-	TCA_TBF_UNSPEC,
-	TCA_TBF_PARMS,
-	TCA_TBF_RTAB,
-	TCA_TBF_PTAB,
-	__TCA_TBF_MAX,
-};
-
-#define TCA_TBF_MAX (__TCA_TBF_MAX - 1)
-
-
-/* TEQL section */
-
-/* TEQL does not require any parameters */
-
-/* SFQ section */
-
-struct tc_sfq_qopt {
-	unsigned	quantum;	/* Bytes per round allocated to flow */
-	int		perturb_period;	/* Period of hash perturbation */
-	__u32		limit;		/* Maximal packets in queue */
-	unsigned	divisor;	/* Hash divisor  */
-	unsigned	flows;		/* Maximal number of flows  */
-};
-
-struct tc_sfqred_stats {
-	__u32           prob_drop;      /* Early drops, below max threshold */
-	__u32           forced_drop;	/* Early drops, after max threshold */
-	__u32           prob_mark;      /* Marked packets, below max threshold */
-	__u32           forced_mark;    /* Marked packets, after max threshold */
-	__u32           prob_mark_head; /* Marked packets, below max threshold */
-	__u32           forced_mark_head;/* Marked packets, after max threshold */
-};
-
-struct tc_sfq_qopt_v1 {
-	struct tc_sfq_qopt v0;
-	unsigned int	depth;		/* max number of packets per flow */
-	unsigned int	headdrop;
-/* SFQRED parameters */
-	__u32		limit;		/* HARD maximal flow queue length (bytes) */
-	__u32		qth_min;	/* Min average length threshold (bytes) */
-	__u32		qth_max;	/* Max average length threshold (bytes) */
-	unsigned char   Wlog;		/* log(W)		*/
-	unsigned char   Plog;		/* log(P_max/(qth_max-qth_min))	*/
-	unsigned char   Scell_log;	/* cell size for idle damping */
-	unsigned char	flags;
-	__u32		max_P;		/* probability, high resolution */
-/* SFQRED stats */
-	struct tc_sfqred_stats stats;
-};
-
-
-struct tc_sfq_xstats {
-	__s32		allot;
-};
-
-/* RED section */
-
-enum {
-	TCA_RED_UNSPEC,
-	TCA_RED_PARMS,
-	TCA_RED_STAB,
-	TCA_RED_MAX_P,
-	__TCA_RED_MAX,
-};
-
-#define TCA_RED_MAX (__TCA_RED_MAX - 1)
-
-struct tc_red_qopt {
-	__u32		limit;		/* HARD maximal queue length (bytes)	*/
-	__u32		qth_min;	/* Min average length threshold (bytes) */
-	__u32		qth_max;	/* Max average length threshold (bytes) */
-	unsigned char   Wlog;		/* log(W)		*/
-	unsigned char   Plog;		/* log(P_max/(qth_max-qth_min))	*/
-	unsigned char   Scell_log;	/* cell size for idle damping */
-	unsigned char	flags;
-#define TC_RED_ECN		1
-#define TC_RED_HARDDROP		2
-#define TC_RED_ADAPTATIVE	4
-};
-
-struct tc_red_xstats {
-	__u32           early;          /* Early drops */
-	__u32           pdrop;          /* Drops due to queue limits */
-	__u32           other;          /* Drops due to drop() calls */
-	__u32           marked;         /* Marked packets */
-};
-
-/* GRED section */
-
-#define MAX_DPs 16
-
-enum {
-       TCA_GRED_UNSPEC,
-       TCA_GRED_PARMS,
-       TCA_GRED_STAB,
-       TCA_GRED_DPS,
-       TCA_GRED_MAX_P,
-	   __TCA_GRED_MAX,
-};
-
-#define TCA_GRED_MAX (__TCA_GRED_MAX - 1)
-
-struct tc_gred_qopt {
-	__u32		limit;        /* HARD maximal queue length (bytes)    */
-	__u32		qth_min;      /* Min average length threshold (bytes) */
-	__u32		qth_max;      /* Max average length threshold (bytes) */
-	__u32		DP;           /* up to 2^32 DPs */
-	__u32		backlog;
-	__u32		qave;
-	__u32		forced;
-	__u32		early;
-	__u32		other;
-	__u32		pdrop;
-	__u8		Wlog;         /* log(W)               */
-	__u8		Plog;         /* log(P_max/(qth_max-qth_min)) */
-	__u8		Scell_log;    /* cell size for idle damping */
-	__u8		prio;         /* prio of this VQ */
-	__u32		packets;
-	__u32		bytesin;
-};
-
-/* gred setup */
-struct tc_gred_sopt {
-	__u32		DPs;
-	__u32		def_DP;
-	__u8		grio;
-	__u8		flags;
-	__u16		pad1;
-};
-
-/* CHOKe section */
-
-enum {
-	TCA_CHOKE_UNSPEC,
-	TCA_CHOKE_PARMS,
-	TCA_CHOKE_STAB,
-	TCA_CHOKE_MAX_P,
-	__TCA_CHOKE_MAX,
-};
-
-#define TCA_CHOKE_MAX (__TCA_CHOKE_MAX - 1)
-
-struct tc_choke_qopt {
-	__u32		limit;		/* Hard queue length (packets)	*/
-	__u32		qth_min;	/* Min average threshold (packets) */
-	__u32		qth_max;	/* Max average threshold (packets) */
-	unsigned char   Wlog;		/* log(W)		*/
-	unsigned char   Plog;		/* log(P_max/(qth_max-qth_min))	*/
-	unsigned char   Scell_log;	/* cell size for idle damping */
-	unsigned char	flags;		/* see RED flags */
-};
-
-struct tc_choke_xstats {
-	__u32		early;          /* Early drops */
-	__u32		pdrop;          /* Drops due to queue limits */
-	__u32		other;          /* Drops due to drop() calls */
-	__u32		marked;         /* Marked packets */
-	__u32		matched;	/* Drops due to flow match */
-};
-
-/* HTB section */
-#define TC_HTB_NUMPRIO		8
-#define TC_HTB_MAXDEPTH		8
-#define TC_HTB_PROTOVER		3 /* the same as HTB and TC's major */
-
-struct tc_htb_opt {
-	struct tc_ratespec 	rate;
-	struct tc_ratespec 	ceil;
-	__u32	buffer;
-	__u32	cbuffer;
-	__u32	quantum;
-	__u32	level;		/* out only */
-	__u32	prio;
-};
-struct tc_htb_glob {
-	__u32 version;		/* to match HTB/TC */
-    	__u32 rate2quantum;	/* bps->quantum divisor */
-    	__u32 defcls;		/* default class number */
-	__u32 debug;		/* debug flags */
-
-	/* stats */
-	__u32 direct_pkts; /* count of non shaped packets */
-};
-enum {
-	TCA_HTB_UNSPEC,
-	TCA_HTB_PARMS,
-	TCA_HTB_INIT,
-	TCA_HTB_CTAB,
-	TCA_HTB_RTAB,
-	__TCA_HTB_MAX,
-};
-
-#define TCA_HTB_MAX (__TCA_HTB_MAX - 1)
-
-struct tc_htb_xstats {
-	__u32 lends;
-	__u32 borrows;
-	__u32 giants;	/* too big packets (rate will not be accurate) */
-	__u32 tokens;
-	__u32 ctokens;
-};
-
-/* HFSC section */
-
-struct tc_hfsc_qopt {
-	__u16	defcls;		/* default class */
-};
-
-struct tc_service_curve {
-	__u32	m1;		/* slope of the first segment in bps */
-	__u32	d;		/* x-projection of the first segment in us */
-	__u32	m2;		/* slope of the second segment in bps */
-};
-
-struct tc_hfsc_stats {
-	__u64	work;		/* total work done */
-	__u64	rtwork;		/* work done by real-time criteria */
-	__u32	period;		/* current period */
-	__u32	level;		/* class level in hierarchy */
-};
-
-enum {
-	TCA_HFSC_UNSPEC,
-	TCA_HFSC_RSC,
-	TCA_HFSC_FSC,
-	TCA_HFSC_USC,
-	__TCA_HFSC_MAX,
-};
-
-#define TCA_HFSC_MAX (__TCA_HFSC_MAX - 1)
-
-
-/* CBQ section */
-
-#define TC_CBQ_MAXPRIO		8
-#define TC_CBQ_MAXLEVEL		8
-#define TC_CBQ_DEF_EWMA		5
-
-struct tc_cbq_lssopt {
-	unsigned char	change;
-	unsigned char	flags;
-#define TCF_CBQ_LSS_BOUNDED	1
-#define TCF_CBQ_LSS_ISOLATED	2
-	unsigned char  	ewma_log;
-	unsigned char  	level;
-#define TCF_CBQ_LSS_FLAGS	1
-#define TCF_CBQ_LSS_EWMA	2
-#define TCF_CBQ_LSS_MAXIDLE	4
-#define TCF_CBQ_LSS_MINIDLE	8
-#define TCF_CBQ_LSS_OFFTIME	0x10
-#define TCF_CBQ_LSS_AVPKT	0x20
-	__u32		maxidle;
-	__u32		minidle;
-	__u32		offtime;
-	__u32		avpkt;
-};
-
-struct tc_cbq_wrropt {
-	unsigned char	flags;
-	unsigned char	priority;
-	unsigned char	cpriority;
-	unsigned char	__reserved;
-	__u32		allot;
-	__u32		weight;
-};
-
-struct tc_cbq_ovl {
-	unsigned char	strategy;
-#define	TC_CBQ_OVL_CLASSIC	0
-#define	TC_CBQ_OVL_DELAY	1
-#define	TC_CBQ_OVL_LOWPRIO	2
-#define	TC_CBQ_OVL_DROP		3
-#define	TC_CBQ_OVL_RCLASSIC	4
-	unsigned char	priority2;
-	__u16		pad;
-	__u32		penalty;
-};
-
-struct tc_cbq_police {
-	unsigned char	police;
-	unsigned char	__res1;
-	unsigned short	__res2;
-};
-
-struct tc_cbq_fopt {
-	__u32		split;
-	__u32		defmap;
-	__u32		defchange;
-};
-
-struct tc_cbq_xstats {
-	__u32		borrows;
-	__u32		overactions;
-	__s32		avgidle;
-	__s32		undertime;
-};
-
-enum {
-	TCA_CBQ_UNSPEC,
-	TCA_CBQ_LSSOPT,
-	TCA_CBQ_WRROPT,
-	TCA_CBQ_FOPT,
-	TCA_CBQ_OVL_STRATEGY,
-	TCA_CBQ_RATE,
-	TCA_CBQ_RTAB,
-	TCA_CBQ_POLICE,
-	__TCA_CBQ_MAX,
-};
-
-#define TCA_CBQ_MAX	(__TCA_CBQ_MAX - 1)
-
-/* dsmark section */
-
-enum {
-	TCA_DSMARK_UNSPEC,
-	TCA_DSMARK_INDICES,
-	TCA_DSMARK_DEFAULT_INDEX,
-	TCA_DSMARK_SET_TC_INDEX,
-	TCA_DSMARK_MASK,
-	TCA_DSMARK_VALUE,
-	__TCA_DSMARK_MAX,
-};
-
-#define TCA_DSMARK_MAX (__TCA_DSMARK_MAX - 1)
-
-/* ATM  section */
-
-enum {
-	TCA_ATM_UNSPEC,
-	TCA_ATM_FD,		/* file/socket descriptor */
-	TCA_ATM_PTR,		/* pointer to descriptor - later */
-	TCA_ATM_HDR,		/* LL header */
-	TCA_ATM_EXCESS,		/* excess traffic class (0 for CLP)  */
-	TCA_ATM_ADDR,		/* PVC address (for output only) */
-	TCA_ATM_STATE,		/* VC state (ATM_VS_*; for output only) */
-	__TCA_ATM_MAX,
-};
-
-#define TCA_ATM_MAX	(__TCA_ATM_MAX - 1)
-
-/* Network emulator */
-
-enum {
-	TCA_NETEM_UNSPEC,
-	TCA_NETEM_CORR,
-	TCA_NETEM_DELAY_DIST,
-	TCA_NETEM_REORDER,
-	TCA_NETEM_CORRUPT,
-	TCA_NETEM_LOSS,
-	TCA_NETEM_RATE,
-	__TCA_NETEM_MAX,
-};
-
-#define TCA_NETEM_MAX (__TCA_NETEM_MAX - 1)
-
-struct tc_netem_qopt {
-	__u32	latency;	/* added delay (us) */
-	__u32   limit;		/* fifo limit (packets) */
-	__u32	loss;		/* random packet loss (0=none ~0=100%) */
-	__u32	gap;		/* re-ordering gap (0 for none) */
-	__u32   duplicate;	/* random packet dup  (0=none ~0=100%) */
-	__u32	jitter;		/* random jitter in latency (us) */
-};
-
-struct tc_netem_corr {
-	__u32	delay_corr;	/* delay correlation */
-	__u32	loss_corr;	/* packet loss correlation */
-	__u32	dup_corr;	/* duplicate correlation  */
-};
-
-struct tc_netem_reorder {
-	__u32	probability;
-	__u32	correlation;
-};
-
-struct tc_netem_corrupt {
-	__u32	probability;
-	__u32	correlation;
-};
-
-struct tc_netem_rate {
-	__u32	rate;	/* byte/s */
-	__s32	packet_overhead;
-	__u32	cell_size;
-	__s32	cell_overhead;
-};
-
-enum {
-	NETEM_LOSS_UNSPEC,
-	NETEM_LOSS_GI,		/* General Intuitive - 4 state model */
-	NETEM_LOSS_GE,		/* Gilbert Elliot models */
-	__NETEM_LOSS_MAX
-};
-#define NETEM_LOSS_MAX (__NETEM_LOSS_MAX - 1)
-
-/* State transition probabilities for 4 state model */
-struct tc_netem_gimodel {
-	__u32	p13;
-	__u32	p31;
-	__u32	p32;
-	__u32	p14;
-	__u32	p23;
-};
-
-/* Gilbert-Elliot models */
-struct tc_netem_gemodel {
-	__u32 p;
-	__u32 r;
-	__u32 h;
-	__u32 k1;
-};
-
-#define NETEM_DIST_SCALE	8192
-#define NETEM_DIST_MAX		16384
-
-/* DRR */
-
-enum {
-	TCA_DRR_UNSPEC,
-	TCA_DRR_QUANTUM,
-	__TCA_DRR_MAX
-};
-
-#define TCA_DRR_MAX	(__TCA_DRR_MAX - 1)
-
-struct tc_drr_stats {
-	__u32	deficit;
-};
-
-/* MQPRIO */
-#define TC_QOPT_BITMASK 15
-#define TC_QOPT_MAX_QUEUE 16
-
-struct tc_mqprio_qopt {
-	__u8	num_tc;
-	__u8	prio_tc_map[TC_QOPT_BITMASK + 1];
-	__u8	hw;
-	__u16	count[TC_QOPT_MAX_QUEUE];
-	__u16	offset[TC_QOPT_MAX_QUEUE];
-};
-
-/* SFB */
-
-enum {
-	TCA_SFB_UNSPEC,
-	TCA_SFB_PARMS,
-	__TCA_SFB_MAX,
-};
-
-#define TCA_SFB_MAX (__TCA_SFB_MAX - 1)
-
-/*
- * Note: increment, decrement are Q0.16 fixed-point values.
- */
-struct tc_sfb_qopt {
-	__u32 rehash_interval;	/* delay between hash move, in ms */
-	__u32 warmup_time;	/* double buffering warmup time in ms (warmup_time < rehash_interval) */
-	__u32 max;		/* max len of qlen_min */
-	__u32 bin_size;		/* maximum queue length per bin */
-	__u32 increment;	/* probability increment, (d1 in Blue) */
-	__u32 decrement;	/* probability decrement, (d2 in Blue) */
-	__u32 limit;		/* max SFB queue length */
-	__u32 penalty_rate;	/* inelastic flows are rate limited to 'rate' pps */
-	__u32 penalty_burst;
-};
-
-struct tc_sfb_xstats {
-	__u32 earlydrop;
-	__u32 penaltydrop;
-	__u32 bucketdrop;
-	__u32 queuedrop;
-	__u32 childdrop; /* drops in child qdisc */
-	__u32 marked;
-	__u32 maxqlen;
-	__u32 maxprob;
-	__u32 avgprob;
-};
-
-#define SFB_MAX_PROB 0xFFFF
-
-/* QFQ */
-enum {
-	TCA_QFQ_UNSPEC,
-	TCA_QFQ_WEIGHT,
-	TCA_QFQ_LMAX,
-	__TCA_QFQ_MAX
-};
-
-#define TCA_QFQ_MAX	(__TCA_QFQ_MAX - 1)
-
-struct tc_qfq_stats {
-	__u32 weight;
-	__u32 lmax;
-};
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/pktcdvd.h b/ANDROID_3.4.5/include/linux/pktcdvd.h
deleted file mode 100644
index 721301b0..00000000
--- a/ANDROID_3.4.5/include/linux/pktcdvd.h
+++ /dev/null
@@ -1,302 +0,0 @@
-/*
- * Copyright (C) 2000 Jens Axboe <axboe@suse.de>
- * Copyright (C) 2001-2004 Peter Osterlund <petero2@telia.com>
- *
- * May be copied or modified under the terms of the GNU General Public
- * License.  See linux/COPYING for more information.
- *
- * Packet writing layer for ATAPI and SCSI CD-R, CD-RW, DVD-R, and
- * DVD-RW devices.
- *
- */
-#ifndef __PKTCDVD_H
-#define __PKTCDVD_H
-
-#include <linux/types.h>
-
-/*
- * 1 for normal debug messages, 2 is very verbose. 0 to turn it off.
- */
-#define PACKET_DEBUG		1
-
-#define	MAX_WRITERS		8
-
-#define PKT_RB_POOL_SIZE	512
-
-/*
- * How long we should hold a non-full packet before starting data gathering.
- */
-#define PACKET_WAIT_TIME	(HZ * 5 / 1000)
-
-/*
- * use drive write caching -- we need deferred error handling to be
- * able to successfully recover with this option (drive will return good
- * status as soon as the cdb is validated).
- */
-#if defined(CONFIG_CDROM_PKTCDVD_WCACHE)
-#define USE_WCACHING		1
-#else
-#define USE_WCACHING		0
-#endif
-
-/*
- * No user-servicable parts beyond this point ->
- */
-
-/*
- * device types
- */
-#define PACKET_CDR		1
-#define	PACKET_CDRW		2
-#define PACKET_DVDR		3
-#define PACKET_DVDRW		4
-
-/*
- * flags
- */
-#define PACKET_WRITABLE		1	/* pd is writable */
-#define PACKET_NWA_VALID	2	/* next writable address valid */
-#define PACKET_LRA_VALID	3	/* last recorded address valid */
-#define PACKET_MERGE_SEGS	4	/* perform segment merging to keep */
-					/* underlying cdrom device happy */
-
-/*
- * Disc status -- from READ_DISC_INFO
- */
-#define PACKET_DISC_EMPTY	0
-#define PACKET_DISC_INCOMPLETE	1
-#define PACKET_DISC_COMPLETE	2
-#define PACKET_DISC_OTHER	3
-
-/*
- * write type, and corresponding data block type
- */
-#define PACKET_MODE1		1
-#define PACKET_MODE2		2
-#define PACKET_BLOCK_MODE1	8
-#define PACKET_BLOCK_MODE2	10
-
-/*
- * Last session/border status
- */
-#define PACKET_SESSION_EMPTY		0
-#define PACKET_SESSION_INCOMPLETE	1
-#define PACKET_SESSION_RESERVED		2
-#define PACKET_SESSION_COMPLETE		3
-
-#define PACKET_MCN			"4a656e734178626f65323030300000"
-
-#undef PACKET_USE_LS
-
-#define PKT_CTRL_CMD_SETUP	0
-#define PKT_CTRL_CMD_TEARDOWN	1
-#define PKT_CTRL_CMD_STATUS	2
-
-struct pkt_ctrl_command {
-	__u32 command;				/* in: Setup, teardown, status */
-	__u32 dev_index;			/* in/out: Device index */
-	__u32 dev;				/* in/out: Device nr for cdrw device */
-	__u32 pkt_dev;				/* in/out: Device nr for packet device */
-	__u32 num_devices;			/* out: Largest device index + 1 */
-	__u32 padding;				/* Not used */
-};
-
-/*
- * packet ioctls
- */
-#define PACKET_IOCTL_MAGIC	('X')
-#define PACKET_CTRL_CMD		_IOWR(PACKET_IOCTL_MAGIC, 1, struct pkt_ctrl_command)
-
-#ifdef __KERNEL__
-#include <linux/blkdev.h>
-#include <linux/completion.h>
-#include <linux/cdrom.h>
-#include <linux/kobject.h>
-#include <linux/sysfs.h>
-#include <linux/mempool.h>
-
-/* default bio write queue congestion marks */
-#define PKT_WRITE_CONGESTION_ON    10000
-#define PKT_WRITE_CONGESTION_OFF   9000
-
-
-struct packet_settings
-{
-	__u32			size;		/* packet size in (512 byte) sectors */
-	__u8			fp;		/* fixed packets */
-	__u8			link_loss;	/* the rest is specified
-						 * as per Mt Fuji */
-	__u8			write_type;
-	__u8			track_mode;
-	__u8			block_mode;
-};
-
-/*
- * Very crude stats for now
- */
-struct packet_stats
-{
-	unsigned long		pkt_started;
-	unsigned long		pkt_ended;
-	unsigned long		secs_w;
-	unsigned long		secs_rg;
-	unsigned long		secs_r;
-};
-
-struct packet_cdrw
-{
-	struct list_head	pkt_free_list;
-	struct list_head	pkt_active_list;
-	spinlock_t		active_list_lock; /* Serialize access to pkt_active_list */
-	struct task_struct	*thread;
-	atomic_t		pending_bios;
-};
-
-/*
- * Switch to high speed reading after reading this many kilobytes
- * with no interspersed writes.
- */
-#define HI_SPEED_SWITCH 512
-
-struct packet_iosched
-{
-	atomic_t		attention;	/* Set to non-zero when queue processing is needed */
-	int			writing;	/* Non-zero when writing, zero when reading */
-	spinlock_t		lock;		/* Protecting read/write queue manipulations */
-	struct bio_list		read_queue;
-	struct bio_list		write_queue;
-	sector_t		last_write;	/* The sector where the last write ended */
-	int			successive_reads;
-};
-
-/*
- * 32 buffers of 2048 bytes
- */
-#if (PAGE_SIZE % CD_FRAMESIZE) != 0
-#error "PAGE_SIZE must be a multiple of CD_FRAMESIZE"
-#endif
-#define PACKET_MAX_SIZE		128
-#define FRAMES_PER_PAGE		(PAGE_SIZE / CD_FRAMESIZE)
-#define PACKET_MAX_SECTORS	(PACKET_MAX_SIZE * CD_FRAMESIZE >> 9)
-
-enum packet_data_state {
-	PACKET_IDLE_STATE,			/* Not used at the moment */
-	PACKET_WAITING_STATE,			/* Waiting for more bios to arrive, so */
-						/* we don't have to do as much */
-						/* data gathering */
-	PACKET_READ_WAIT_STATE,			/* Waiting for reads to fill in holes */
-	PACKET_WRITE_WAIT_STATE,		/* Waiting for the write to complete */
-	PACKET_RECOVERY_STATE,			/* Recover after read/write errors */
-	PACKET_FINISHED_STATE,			/* After write has finished */
-
-	PACKET_NUM_STATES			/* Number of possible states */
-};
-
-/*
- * Information needed for writing a single packet
- */
-struct pktcdvd_device;
-
-struct packet_data
-{
-	struct list_head	list;
-
-	spinlock_t		lock;		/* Lock protecting state transitions and */
-						/* orig_bios list */
-
-	struct bio_list		orig_bios;	/* Original bios passed to pkt_make_request */
-						/* that will be handled by this packet */
-	int			write_size;	/* Total size of all bios in the orig_bios */
-						/* list, measured in number of frames */
-
-	struct bio		*w_bio;		/* The bio we will send to the real CD */
-						/* device once we have all data for the */
-						/* packet we are going to write */
-	sector_t		sector;		/* First sector in this packet */
-	int			frames;		/* Number of frames in this packet */
-
-	enum packet_data_state	state;		/* Current state */
-	atomic_t		run_sm;		/* Incremented whenever the state */
-						/* machine needs to be run */
-	long			sleep_time;	/* Set this to non-zero to make the state */
-						/* machine run after this many jiffies. */
-
-	atomic_t		io_wait;	/* Number of pending IO operations */
-	atomic_t		io_errors;	/* Number of read/write errors during IO */
-
-	struct bio		*r_bios[PACKET_MAX_SIZE]; /* bios to use during data gathering */
-	struct page		*pages[PACKET_MAX_SIZE / FRAMES_PER_PAGE];
-
-	int			cache_valid;	/* If non-zero, the data for the zone defined */
-						/* by the sector variable is completely cached */
-						/* in the pages[] vector. */
-
-	int			id;		/* ID number for debugging */
-	struct pktcdvd_device	*pd;
-};
-
-struct pkt_rb_node {
-	struct rb_node		rb_node;
-	struct bio		*bio;
-};
-
-struct packet_stacked_data
-{
-	struct bio		*bio;		/* Original read request bio */
-	struct pktcdvd_device	*pd;
-};
-#define PSD_POOL_SIZE		64
-
-struct pktcdvd_kobj
-{
-	struct kobject		kobj;
-	struct pktcdvd_device	*pd;
-};
-#define to_pktcdvdkobj(_k) \
-  ((struct pktcdvd_kobj*)container_of(_k,struct pktcdvd_kobj,kobj))
-
-struct pktcdvd_device
-{
-	struct block_device	*bdev;		/* dev attached */
-	dev_t			pkt_dev;	/* our dev */
-	char			name[20];
-	struct packet_settings	settings;
-	struct packet_stats	stats;
-	int			refcnt;		/* Open count */
-	int			write_speed;	/* current write speed, kB/s */
-	int			read_speed;	/* current read speed, kB/s */
-	unsigned long		offset;		/* start offset */
-	__u8			mode_offset;	/* 0 / 8 */
-	__u8			type;
-	unsigned long		flags;
-	__u16			mmc3_profile;
-	__u32			nwa;		/* next writable address */
-	__u32			lra;		/* last recorded address */
-	struct packet_cdrw	cdrw;
-	wait_queue_head_t	wqueue;
-
-	spinlock_t		lock;		/* Serialize access to bio_queue */
-	struct rb_root		bio_queue;	/* Work queue of bios we need to handle */
-	int			bio_queue_size;	/* Number of nodes in bio_queue */
-	sector_t		current_sector;	/* Keep track of where the elevator is */
-	atomic_t		scan_queue;	/* Set to non-zero when pkt_handle_queue */
-						/* needs to be run. */
-	mempool_t		*rb_pool;	/* mempool for pkt_rb_node allocations */
-
-	struct packet_iosched   iosched;
-	struct gendisk		*disk;
-
-	int			write_congestion_off;
-	int			write_congestion_on;
-
-	struct device		*dev;		/* sysfs pktcdvd[0-7] dev */
-	struct pktcdvd_kobj	*kobj_stat;	/* sysfs pktcdvd[0-7]/stat/     */
-	struct pktcdvd_kobj	*kobj_wqueue;	/* sysfs pktcdvd[0-7]/write_queue/ */
-
-	struct dentry		*dfs_d_root;	/* debugfs: devname directory */
-	struct dentry		*dfs_f_info;	/* debugfs: info file */
-};
-
-#endif /* __KERNEL__ */
-
-#endif /* __PKTCDVD_H */
diff --git a/ANDROID_3.4.5/include/linux/platform_data/android_battery.h b/ANDROID_3.4.5/include/linux/platform_data/android_battery.h
deleted file mode 100644
index f6c8298f..00000000
--- a/ANDROID_3.4.5/include/linux/platform_data/android_battery.h
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- *  android_battery.h
- *
- *  Copyright (C) 2012 Samsung Electronics
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef _LINUX_ANDROID_BATTERY_H
-#define _LINUX_ANDROID_BATTERY_H
-
-enum {
-	CHARGE_SOURCE_NONE = 0,
-	CHARGE_SOURCE_AC,
-	CHARGE_SOURCE_USB,
-};
-
-struct android_bat_callbacks {
-	void (*charge_source_changed)
-		(struct android_bat_callbacks *, int);
-	void (*battery_set_full)(struct android_bat_callbacks *);
-};
-
-struct android_bat_platform_data {
-	void (*register_callbacks)(struct android_bat_callbacks *);
-	void (*unregister_callbacks)(void);
-	void (*set_charging_current) (int);
-	void (*set_charging_enable) (int);
-	int (*poll_charge_source) (void);
-	int (*get_capacity) (void);
-	int (*get_temperature) (int *);
-	int (*get_voltage_now)(void);
-	int (*get_current_now)(int *);
-
-	int temp_high_threshold;
-	int temp_high_recovery;
-	int temp_low_recovery;
-	int temp_low_threshold;
-
-	unsigned long full_charging_time;
-	unsigned long recharging_time;
-	unsigned int recharging_voltage;
-};
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/platform_data/atmel.h b/ANDROID_3.4.5/include/linux/platform_data/atmel.h
deleted file mode 100644
index b0f2c56a..00000000
--- a/ANDROID_3.4.5/include/linux/platform_data/atmel.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * atmel platform data
- *
- * GPL v2 Only
- */
-
-#ifndef __ATMEL_H__
-#define __ATMEL_H__
-
-#include <linux/mtd/nand.h>
-
- /* NAND / SmartMedia */
-struct atmel_nand_data {
-	int		enable_pin;		/* chip enable */
-	int		det_pin;		/* card detect */
-	int		rdy_pin;		/* ready/busy */
-	u8		rdy_pin_active_low;	/* rdy_pin value is inverted */
-	u8		ale;			/* address line number connected to ALE */
-	u8		cle;			/* address line number connected to CLE */
-	u8		bus_width_16;		/* buswidth is 16 bit */
-	u8		ecc_mode;		/* ecc mode */
-	u8		on_flash_bbt;		/* bbt on flash */
-	struct mtd_partition *parts;
-	unsigned int	num_parts;
-};
-
-#endif /* __ATMEL_H__ */
diff --git a/ANDROID_3.4.5/include/linux/platform_data/cpsw.h b/ANDROID_3.4.5/include/linux/platform_data/cpsw.h
deleted file mode 100644
index c4e23d02..00000000
--- a/ANDROID_3.4.5/include/linux/platform_data/cpsw.h
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * Texas Instruments Ethernet Switch Driver
- *
- * Copyright (C) 2012 Texas Instruments
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-#ifndef __CPSW_H__
-#define __CPSW_H__
-
-#include <linux/if_ether.h>
-
-struct cpsw_slave_data {
-	u32		slave_reg_ofs;
-	u32		sliver_reg_ofs;
-	const char	*phy_id;
-	int		phy_if;
-	u8		mac_addr[ETH_ALEN];
-};
-
-struct cpsw_platform_data {
-	u32	ss_reg_ofs;	/* Subsystem control register offset */
-	u32	channels;	/* number of cpdma channels (symmetric) */
-	u32	cpdma_reg_ofs;	/* cpdma register offset */
-	u32	cpdma_sram_ofs;	/* cpdma sram offset */
-
-	u32	slaves;		/* number of slave cpgmac ports */
-	struct cpsw_slave_data	*slave_data;
-
-	u32	ale_reg_ofs;	/* address lookup engine reg offset */
-	u32	ale_entries;	/* ale table size */
-
-	u32	host_port_reg_ofs; /* cpsw cpdma host port registers */
-	u32     host_port_num; /* The port number for the host port */
-
-	u32	hw_stats_reg_ofs;  /* cpsw hardware statistics counters */
-
-	u32	bd_ram_ofs;   /* embedded buffer descriptor RAM offset*/
-	u32	bd_ram_size;  /*buffer descriptor ram size */
-	u32	hw_ram_addr; /*if the HW address for BD RAM is different */
-	bool	no_bd_ram; /* no embedded BD ram*/
-
-	u32	rx_descs;	/* Number of Rx Descriptios */
-
-	u32	mac_control;	/* Mac control register */
-};
-
-#endif /* __CPSW_H__ */
diff --git a/ANDROID_3.4.5/include/linux/platform_data/ds2482.h b/ANDROID_3.4.5/include/linux/platform_data/ds2482.h
deleted file mode 100644
index 5a6879e2..00000000
--- a/ANDROID_3.4.5/include/linux/platform_data/ds2482.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * Copyright (C) 2012 Google, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#ifndef __PLATFORM_DATA_DS2482__
-#define __PLATFORM_DATA_DS2482__
-
-struct ds2482_platform_data {
-	int		slpz_gpio;
-};
-
-#endif /* __PLATFORM_DATA_DS2482__ */
diff --git a/ANDROID_3.4.5/include/linux/platform_data/dwc3-exynos.h b/ANDROID_3.4.5/include/linux/platform_data/dwc3-exynos.h
deleted file mode 100644
index 5eb7da9b..00000000
--- a/ANDROID_3.4.5/include/linux/platform_data/dwc3-exynos.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/**
- * dwc3-exynos.h - Samsung EXYNOS DWC3 Specific Glue layer, header.
- *
- * Copyright (c) 2012 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Author: Anton Tikhomirov <av.tikhomirov@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef _DWC3_EXYNOS_H_
-#define _DWC3_EXYNOS_H_
-
-struct dwc3_exynos_data {
-	int phy_type;
-	int (*phy_init)(struct platform_device *pdev, int type);
-	int (*phy_exit)(struct platform_device *pdev, int type);
-};
-
-#endif /* _DWC3_EXYNOS_H_ */
diff --git a/ANDROID_3.4.5/include/linux/platform_data/dwc3-omap.h b/ANDROID_3.4.5/include/linux/platform_data/dwc3-omap.h
deleted file mode 100644
index ada40124..00000000
--- a/ANDROID_3.4.5/include/linux/platform_data/dwc3-omap.h
+++ /dev/null
@@ -1,47 +0,0 @@
-/**
- * dwc3-omap.h - OMAP Specific Glue layer, header.
- *
- * Copyright (C) 2010-2011 Texas Instruments Incorporated - http://www.ti.com
- * All rights reserved.
- *
- * Author: Felipe Balbi <balbi@ti.com>
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions, and the following disclaimer,
- *    without modification.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. The names of the above-listed copyright holders may not be used
- *    to endorse or promote products derived from this software without
- *    specific prior written permission.
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") version 2, as published by the Free
- * Software Foundation.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
- * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
- * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
- * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
- * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
- * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
- * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
- * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
- * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-enum dwc3_omap_utmi_mode {
-	DWC3_OMAP_UTMI_MODE_UNKNOWN = 0,
-	DWC3_OMAP_UTMI_MODE_HW,
-	DWC3_OMAP_UTMI_MODE_SW,
-};
-
-struct dwc3_omap_data {
-	enum dwc3_omap_utmi_mode	utmi_mode;
-};
diff --git a/ANDROID_3.4.5/include/linux/platform_data/efm32-uart.h b/ANDROID_3.4.5/include/linux/platform_data/efm32-uart.h
deleted file mode 100644
index ed0e975b..00000000
--- a/ANDROID_3.4.5/include/linux/platform_data/efm32-uart.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- *
- *
- */
-#ifndef __LINUX_PLATFORM_DATA_EFM32_UART_H__
-#define __LINUX_PLATFORM_DATA_EFM32_UART_H__
-
-#include <linux/types.h>
-
-/**
- * struct efm32_uart_pdata
- * @location: pinmux location for the I/O pins (to be written to the ROUTE
- * 	register)
- */
-struct efm32_uart_pdata {
-	u8 location;
-};
-#endif /* ifndef __LINUX_PLATFORM_DATA_EFM32_UART_H__ */
diff --git a/ANDROID_3.4.5/include/linux/platform_data/exynos4_tmu.h b/ANDROID_3.4.5/include/linux/platform_data/exynos4_tmu.h
deleted file mode 100644
index 39e038cc..00000000
--- a/ANDROID_3.4.5/include/linux/platform_data/exynos4_tmu.h
+++ /dev/null
@@ -1,83 +0,0 @@
-/*
- * exynos4_tmu.h - Samsung EXYNOS4 TMU (Thermal Management Unit)
- *
- *  Copyright (C) 2011 Samsung Electronics
- *  Donggeun Kim <dg77.kim@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef _LINUX_EXYNOS4_TMU_H
-#define _LINUX_EXYNOS4_TMU_H
-
-enum calibration_type {
-	TYPE_ONE_POINT_TRIMMING,
-	TYPE_TWO_POINT_TRIMMING,
-	TYPE_NONE,
-};
-
-/**
- * struct exynos4_tmu_platform_data
- * @threshold: basic temperature for generating interrupt
- *	       25 <= threshold <= 125 [unit: degree Celsius]
- * @trigger_levels: array for each interrupt levels
- *	[unit: degree Celsius]
- *	0: temperature for trigger_level0 interrupt
- *	   condition for trigger_level0 interrupt:
- *		current temperature > threshold + trigger_levels[0]
- *	1: temperature for trigger_level1 interrupt
- *	   condition for trigger_level1 interrupt:
- *		current temperature > threshold + trigger_levels[1]
- *	2: temperature for trigger_level2 interrupt
- *	   condition for trigger_level2 interrupt:
- *		current temperature > threshold + trigger_levels[2]
- *	3: temperature for trigger_level3 interrupt
- *	   condition for trigger_level3 interrupt:
- *		current temperature > threshold + trigger_levels[3]
- * @trigger_level0_en:
- *	1 = enable trigger_level0 interrupt,
- *	0 = disable trigger_level0 interrupt
- * @trigger_level1_en:
- *	1 = enable trigger_level1 interrupt,
- *	0 = disable trigger_level1 interrupt
- * @trigger_level2_en:
- *	1 = enable trigger_level2 interrupt,
- *	0 = disable trigger_level2 interrupt
- * @trigger_level3_en:
- *	1 = enable trigger_level3 interrupt,
- *	0 = disable trigger_level3 interrupt
- * @gain: gain of amplifier in the positive-TC generator block
- *	0 <= gain <= 15
- * @reference_voltage: reference voltage of amplifier
- *	in the positive-TC generator block
- *	0 <= reference_voltage <= 31
- * @cal_type: calibration type for temperature
- *
- * This structure is required for configuration of exynos4_tmu driver.
- */
-struct exynos4_tmu_platform_data {
-	u8 threshold;
-	u8 trigger_levels[4];
-	bool trigger_level0_en;
-	bool trigger_level1_en;
-	bool trigger_level2_en;
-	bool trigger_level3_en;
-
-	u8 gain;
-	u8 reference_voltage;
-
-	enum calibration_type cal_type;
-};
-#endif /* _LINUX_EXYNOS4_TMU_H */
diff --git a/ANDROID_3.4.5/include/linux/platform_data/fsa9480.h b/ANDROID_3.4.5/include/linux/platform_data/fsa9480.h
deleted file mode 100644
index 72dddcb4..00000000
--- a/ANDROID_3.4.5/include/linux/platform_data/fsa9480.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * Copyright (C) 2010 Samsung Electronics
- * Minkyu Kang <mk7.kang@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef _FSA9480_H_
-#define _FSA9480_H_
-
-#define FSA9480_ATTACHED	1
-#define FSA9480_DETACHED	0
-
-struct fsa9480_platform_data {
-	void (*cfg_gpio) (void);
-	void (*usb_cb) (u8 attached);
-	void (*uart_cb) (u8 attached);
-	void (*charger_cb) (u8 attached);
-	void (*jig_cb) (u8 attached);
-	void (*reset_cb) (void);
-	void (*usb_power) (u8 on);
-	int wakeup;
-};
-
-#endif /* _FSA9480_H_ */
diff --git a/ANDROID_3.4.5/include/linux/platform_data/leds-renesas-tpu.h b/ANDROID_3.4.5/include/linux/platform_data/leds-renesas-tpu.h
deleted file mode 100644
index 05538708..00000000
--- a/ANDROID_3.4.5/include/linux/platform_data/leds-renesas-tpu.h
+++ /dev/null
@@ -1,14 +0,0 @@
-#ifndef __LEDS_RENESAS_TPU_H__
-#define __LEDS_RENESAS_TPU_H__
-
-struct led_renesas_tpu_config {
-	char *name;
-	unsigned pin_gpio_fn;
-	unsigned pin_gpio;
-	unsigned int channel_offset;
-	unsigned int timer_bit;
-	unsigned int max_brightness;
-	unsigned int refresh_rate;
-};
-
-#endif /* __LEDS_RENESAS_TPU_H__ */
diff --git a/ANDROID_3.4.5/include/linux/platform_data/macb.h b/ANDROID_3.4.5/include/linux/platform_data/macb.h
deleted file mode 100644
index b081c724..00000000
--- a/ANDROID_3.4.5/include/linux/platform_data/macb.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * Copyright (C) 2004-2006 Atmel Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __MACB_PDATA_H__
-#define __MACB_PDATA_H__
-
-struct macb_platform_data {
-	u32		phy_mask;
-	int		phy_irq_pin;	/* PHY IRQ */
-	u8		is_rmii;	/* using RMII interface? */
-};
-
-#endif /* __MACB_PDATA_H__ */
diff --git a/ANDROID_3.4.5/include/linux/platform_data/msm_serial_hs.h b/ANDROID_3.4.5/include/linux/platform_data/msm_serial_hs.h
deleted file mode 100644
index 98a2046f..00000000
--- a/ANDROID_3.4.5/include/linux/platform_data/msm_serial_hs.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- * Copyright (C) 2008 Google, Inc.
- * Author: Nick Pelly <npelly@google.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#ifndef __ASM_ARCH_MSM_SERIAL_HS_H
-#define __ASM_ARCH_MSM_SERIAL_HS_H
-
-#include <linux/serial_core.h>
-
-/* API to request the uart clock off or on for low power management
- * Clients should call request_clock_off() when no uart data is expected,
- * and must call request_clock_on() before any further uart data can be
- * received. */
-extern void msm_hs_request_clock_off(struct uart_port *uport);
-extern void msm_hs_request_clock_on(struct uart_port *uport);
-
-/**
- * struct msm_serial_hs_platform_data
- * @rx_wakeup_irq: Rx activity irq
- * @rx_to_inject: extra character to be inserted to Rx tty on wakeup
- * @inject_rx: 1 = insert rx_to_inject. 0 = do not insert extra character
- * @exit_lpm_cb: function called before every Tx transaction
- *
- * This is an optional structure required for UART Rx GPIO IRQ based
- * wakeup from low power state. UART wakeup can be triggered by RX activity
- * (using a wakeup GPIO on the UART RX pin). This should only be used if
- * there is not a wakeup GPIO on the UART CTS, and the first RX byte is
- * known (eg., with the Bluetooth Texas Instruments HCILL protocol),
- * since the first RX byte will always be lost. RTS will be asserted even
- * while the UART is clocked off in this mode of operation.
- */
-struct msm_serial_hs_platform_data {
-	int rx_wakeup_irq;
-	unsigned char inject_rx_on_wakeup;
-	char rx_to_inject;
-	void (*exit_lpm_cb)(struct uart_port *);
-};
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/platform_data/mv_usb.h b/ANDROID_3.4.5/include/linux/platform_data/mv_usb.h
deleted file mode 100644
index d94804ac..00000000
--- a/ANDROID_3.4.5/include/linux/platform_data/mv_usb.h
+++ /dev/null
@@ -1,64 +0,0 @@
-/*
- * Copyright (C) 2011 Marvell International Ltd. All rights reserved.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#ifndef __MV_PLATFORM_USB_H
-#define __MV_PLATFORM_USB_H
-
-enum pxa_ehci_type {
-	EHCI_UNDEFINED = 0,
-	PXA_U2OEHCI,	/* pxa 168, 9xx */
-	PXA_SPH,	/* pxa 168, 9xx SPH */
-	MMP3_HSIC,	/* mmp3 hsic */
-	MMP3_FSIC,	/* mmp3 fsic */
-};
-
-enum {
-	MV_USB_MODE_OTG,
-	MV_USB_MODE_HOST,
-};
-
-enum {
-	VBUS_LOW	= 0,
-	VBUS_HIGH	= 1 << 0,
-};
-
-struct mv_usb_addon_irq {
-	unsigned int	irq;
-	int		(*poll)(void);
-};
-
-struct mv_usb_platform_data {
-	unsigned int		clknum;
-	char			**clkname;
-	struct mv_usb_addon_irq	*id;	/* Only valid for OTG. ID pin change*/
-	struct mv_usb_addon_irq	*vbus;	/* valid for OTG/UDC. VBUS change*/
-
-	/* only valid for HCD. OTG or Host only*/
-	unsigned int		mode;
-
-	/* This flag is used for that needs id pin checked by otg */
-	unsigned int    disable_otg_clock_gating:1;
-	/* Force a_bus_req to be asserted */
-	 unsigned int    otg_force_a_bus_req:1;
-
-	int	(*phy_init)(void __iomem *regbase);
-	void	(*phy_deinit)(void __iomem *regbase);
-	int	(*set_vbus)(unsigned int vbus);
-	int     (*private_init)(void __iomem *opregs, void __iomem *phyregs);
-};
-
-#ifndef CONFIG_HAVE_CLK
-/* Dummy stub for clk framework */
-#define clk_get(dev, id)       NULL
-#define clk_put(clock)         do {} while (0)
-#define clk_enable(clock)      do {} while (0)
-#define clk_disable(clock)     do {} while (0)
-#endif
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/platform_data/ntc_thermistor.h b/ANDROID_3.4.5/include/linux/platform_data/ntc_thermistor.h
deleted file mode 100644
index 88734e87..00000000
--- a/ANDROID_3.4.5/include/linux/platform_data/ntc_thermistor.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- * ntc_thermistor.h - NTC Thermistors
- *
- *  Copyright (C) 2010 Samsung Electronics
- *  MyungJoo Ham <myungjoo.ham@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef _LINUX_NTC_H
-#define _LINUX_NTC_H
-
-enum ntc_thermistor_type {
-	TYPE_NCPXXWB473,
-	TYPE_NCPXXWL333,
-};
-
-struct ntc_thermistor_platform_data {
-	/*
-	 * One (not both) of read_uV and read_ohm should be provided and only
-	 * one of the two should be provided.
-	 * Both functions should return negative value for an error case.
-	 *
-	 * pullup_uV, pullup_ohm, pulldown_ohm, and connect are required to use
-	 * read_uV()
-	 *
-	 * How to setup pullup_ohm, pulldown_ohm, and connect is
-	 * described at Documentation/hwmon/ntc_thermistor
-	 *
-	 * pullup/down_ohm: 0 for infinite / not-connected
-	 */
-	int (*read_uV)(void);
-	unsigned int pullup_uV;
-
-	unsigned int pullup_ohm;
-	unsigned int pulldown_ohm;
-	enum { NTC_CONNECTED_POSITIVE, NTC_CONNECTED_GROUND } connect;
-
-	int (*read_ohm)(void);
-};
-
-#endif /* _LINUX_NTC_H */
diff --git a/ANDROID_3.4.5/include/linux/platform_data/omap-abe-twl6040.h b/ANDROID_3.4.5/include/linux/platform_data/omap-abe-twl6040.h
deleted file mode 100644
index 5d298ac1..00000000
--- a/ANDROID_3.4.5/include/linux/platform_data/omap-abe-twl6040.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/**
- * omap-abe-twl6040.h - ASoC machine driver OMAP4+ devices, header.
- *
- * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com
- * All rights reserved.
- *
- * Author: Peter Ujfalusi <peter.ujfalusi@ti.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- */
-
-#ifndef _OMAP_ABE_TWL6040_H_
-#define _OMAP_ABE_TWL6040_H_
-
-/* To select if only one channel is connected in a stereo port */
-#define ABE_TWL6040_LEFT	(1 << 0)
-#define ABE_TWL6040_RIGHT	(1 << 1)
-
-struct omap_abe_twl6040_data {
-	char *card_name;
-	/* Feature flags for connected audio pins */
-	u8	has_hs;
-	u8	has_hf;
-	bool	has_ep;
-	u8	has_aux;
-	u8	has_vibra;
-	bool	has_dmic;
-	bool	has_hsmic;
-	bool	has_mainmic;
-	bool	has_submic;
-	u8	has_afm;
-	/* Other features */
-	bool	jack_detection;	/* board can detect jack events */
-	int	mclk_freq;	/* MCLK frequency speed for twl6040 */
-};
-
-#endif /* _OMAP_ABE_TWL6040_H_ */
diff --git a/ANDROID_3.4.5/include/linux/platform_data/omap4-keypad.h b/ANDROID_3.4.5/include/linux/platform_data/omap4-keypad.h
deleted file mode 100644
index 4eef5fb0..00000000
--- a/ANDROID_3.4.5/include/linux/platform_data/omap4-keypad.h
+++ /dev/null
@@ -1,13 +0,0 @@
-#ifndef __LINUX_INPUT_OMAP4_KEYPAD_H
-#define __LINUX_INPUT_OMAP4_KEYPAD_H
-
-#include <linux/input/matrix_keypad.h>
-
-struct omap4_keypad_platform_data {
-	const struct matrix_keymap_data *keymap_data;
-
-	u8 rows;
-	u8 cols;
-};
-
-#endif /* __LINUX_INPUT_OMAP4_KEYPAD_H */
diff --git a/ANDROID_3.4.5/include/linux/platform_data/pxa_sdhci.h b/ANDROID_3.4.5/include/linux/platform_data/pxa_sdhci.h
deleted file mode 100644
index 51ad0995..00000000
--- a/ANDROID_3.4.5/include/linux/platform_data/pxa_sdhci.h
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
- * include/linux/platform_data/pxa_sdhci.h
- *
- * Copyright 2010 Marvell
- *	Zhangfei Gao <zhangfei.gao@marvell.com>
- *
- * PXA Platform - SDHCI platform data definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef _PXA_SDHCI_H_
-#define _PXA_SDHCI_H_
-
-/* pxa specific flag */
-/* Require clock free running */
-#define PXA_FLAG_ENABLE_CLOCK_GATING (1<<0)
-/* card always wired to host, like on-chip emmc */
-#define PXA_FLAG_CARD_PERMANENT	(1<<1)
-/* Board design supports 8-bit data on SD/SDIO BUS */
-#define PXA_FLAG_SD_8_BIT_CAPABLE_SLOT (1<<2)
-
-/*
- * struct pxa_sdhci_platdata() - Platform device data for PXA SDHCI
- * @flags: flags for platform requirement
- * @clk_delay_cycles:
- *	mmp2: each step is roughly 100ps, 5bits width
- *	pxa910: each step is 1ns, 4bits width
- * @clk_delay_sel: select clk_delay, used on pxa910
- *	0: choose feedback clk
- *	1: choose feedback clk + delay value
- *	2: choose internal clk
- * @clk_delay_enable: enable clk_delay or not, used on pxa910
- * @ext_cd_gpio: gpio pin used for external CD line
- * @ext_cd_gpio_invert: invert values for external CD gpio line
- * @max_speed: the maximum speed supported
- * @host_caps: Standard MMC host capabilities bit field.
- * @quirks: quirks of platfrom
- * @pm_caps: pm_caps of platfrom
- */
-struct sdhci_pxa_platdata {
-	unsigned int	flags;
-	unsigned int	clk_delay_cycles;
-	unsigned int	clk_delay_sel;
-	bool		clk_delay_enable;
-	unsigned int	ext_cd_gpio;
-	bool		ext_cd_gpio_invert;
-	unsigned int	max_speed;
-	unsigned int	host_caps;
-	unsigned int	quirks;
-	unsigned int	pm_caps;
-};
-
-struct sdhci_pxa {
-	u8	clk_enable;
-	u8	power_mode;
-};
-#endif /* _PXA_SDHCI_H_ */
diff --git a/ANDROID_3.4.5/include/linux/platform_data/s3c-hsudc.h b/ANDROID_3.4.5/include/linux/platform_data/s3c-hsudc.h
deleted file mode 100644
index 6fa10933..00000000
--- a/ANDROID_3.4.5/include/linux/platform_data/s3c-hsudc.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * S3C24XX USB 2.0 High-speed USB controller gadget driver
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * The S3C24XX USB 2.0 high-speed USB controller supports upto 9 endpoints.
- * Each endpoint can be configured as either in or out endpoint. Endpoints
- * can be configured for Bulk or Interrupt transfer mode.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __LINUX_USB_S3C_HSUDC_H
-#define __LINUX_USB_S3C_HSUDC_H
-
-/**
- * s3c24xx_hsudc_platdata - Platform data for USB High-Speed gadget controller.
- * @epnum: Number of endpoints to be instantiated by the controller driver.
- * @gpio_init: Platform specific USB related GPIO initialization.
- * @gpio_uninit: Platform specific USB releted GPIO uninitialzation.
- *
- * Representation of platform data for the S3C24XX USB 2.0 High Speed gadget
- * controllers.
- */
-struct s3c24xx_hsudc_platdata {
-	unsigned int	epnum;
-	void		(*gpio_init)(void);
-	void		(*gpio_uninit)(void);
-};
-
-#endif	/* __LINUX_USB_S3C_HSUDC_H */
diff --git a/ANDROID_3.4.5/include/linux/platform_data/spear_thermal.h b/ANDROID_3.4.5/include/linux/platform_data/spear_thermal.h
deleted file mode 100644
index 724f2e1c..00000000
--- a/ANDROID_3.4.5/include/linux/platform_data/spear_thermal.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * SPEAr thermal driver platform data.
- *
- * Copyright (C) 2011-2012 ST Microelectronics
- * Author: Vincenzo Frascino <vincenzo.frascino@st.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-#ifndef SPEAR_THERMAL_H
-#define SPEAR_THERMAL_H
-
-/* SPEAr Thermal Sensor Platform Data */
-struct spear_thermal_pdata {
-	/* flags used to enable thermal sensor */
-	unsigned int thermal_flags;
-};
-
-#endif /* SPEAR_THERMAL_H */
diff --git a/ANDROID_3.4.5/include/linux/platform_data/tegra_emc.h b/ANDROID_3.4.5/include/linux/platform_data/tegra_emc.h
deleted file mode 100644
index df67505e..00000000
--- a/ANDROID_3.4.5/include/linux/platform_data/tegra_emc.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * Copyright (C) 2011 Google, Inc.
- *
- * Author:
- *	Colin Cross <ccross@android.com>
- *	Olof Johansson <olof@lixom.net>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __TEGRA_EMC_H_
-#define __TEGRA_EMC_H_
-
-#define TEGRA_EMC_NUM_REGS 46
-
-struct tegra_emc_table {
-	unsigned long rate;
-	u32 regs[TEGRA_EMC_NUM_REGS];
-};
-
-struct tegra_emc_pdata {
-	int num_tables;
-	struct tegra_emc_table *tables;
-};
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/platform_data/tegra_usb.h b/ANDROID_3.4.5/include/linux/platform_data/tegra_usb.h
deleted file mode 100644
index 6bca5b56..00000000
--- a/ANDROID_3.4.5/include/linux/platform_data/tegra_usb.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/*
- * Copyright (C) 2010 Google, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef _TEGRA_USB_H_
-#define _TEGRA_USB_H_
-
-enum tegra_usb_operating_modes {
-	TEGRA_USB_DEVICE,
-	TEGRA_USB_HOST,
-	TEGRA_USB_OTG,
-};
-
-struct tegra_ehci_platform_data {
-	enum tegra_usb_operating_modes operating_mode;
-	/* power down the phy on bus suspend */
-	int power_down_on_bus_suspend;
-	void *phy_config;
-};
-
-#endif /* _TEGRA_USB_H_ */
diff --git a/ANDROID_3.4.5/include/linux/platform_data/uio_pruss.h b/ANDROID_3.4.5/include/linux/platform_data/uio_pruss.h
deleted file mode 100644
index f39140aa..00000000
--- a/ANDROID_3.4.5/include/linux/platform_data/uio_pruss.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * include/linux/platform_data/uio_pruss.h
- *
- * Platform data for uio_pruss driver
- *
- * Copyright (C) 2010-11 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#ifndef _UIO_PRUSS_H_
-#define _UIO_PRUSS_H_
-
-/* To configure the PRUSS INTC base offset for UIO driver */
-struct uio_pruss_pdata {
-	u32	pintc_base;
-};
-#endif /* _UIO_PRUSS_H_ */
diff --git a/ANDROID_3.4.5/include/linux/platform_device.h b/ANDROID_3.4.5/include/linux/platform_device.h
deleted file mode 100644
index 60e9994e..00000000
--- a/ANDROID_3.4.5/include/linux/platform_device.h
+++ /dev/null
@@ -1,291 +0,0 @@
-/*
- * platform_device.h - generic, centralized driver model
- *
- * Copyright (c) 2001-2003 Patrick Mochel <mochel@osdl.org>
- *
- * This file is released under the GPLv2
- *
- * See Documentation/driver-model/ for more information.
- */
-
-#ifndef _PLATFORM_DEVICE_H_
-#define _PLATFORM_DEVICE_H_
-
-#include <linux/device.h>
-#include <linux/mod_devicetable.h>
-
-struct mfd_cell;
-
-struct platform_device {
-	const char	* name;
-	int		id;
-	struct device	dev;
-	u32		num_resources;
-	struct resource	* resource;
-
-	const struct platform_device_id	*id_entry;
-
-	/* MFD cell pointer */
-	struct mfd_cell *mfd_cell;
-
-	/* arch specific additions */
-	struct pdev_archdata	archdata;
-};
-
-#define platform_get_device_id(pdev)	((pdev)->id_entry)
-
-#define to_platform_device(x) container_of((x), struct platform_device, dev)
-
-extern int platform_device_register(struct platform_device *);
-extern void platform_device_unregister(struct platform_device *);
-
-extern struct bus_type platform_bus_type;
-extern struct device platform_bus;
-
-extern void arch_setup_pdev_archdata(struct platform_device *);
-extern struct resource *platform_get_resource(struct platform_device *, unsigned int, unsigned int);
-extern int platform_get_irq(struct platform_device *, unsigned int);
-extern struct resource *platform_get_resource_byname(struct platform_device *, unsigned int, const char *);
-extern int platform_get_irq_byname(struct platform_device *, const char *);
-extern int platform_add_devices(struct platform_device **, int);
-
-struct platform_device_info {
-		struct device *parent;
-
-		const char *name;
-		int id;
-
-		const struct resource *res;
-		unsigned int num_res;
-
-		const void *data;
-		size_t size_data;
-		u64 dma_mask;
-};
-extern struct platform_device *platform_device_register_full(
-		const struct platform_device_info *pdevinfo);
-
-/**
- * platform_device_register_resndata - add a platform-level device with
- * resources and platform-specific data
- *
- * @parent: parent device for the device we're adding
- * @name: base name of the device we're adding
- * @id: instance id
- * @res: set of resources that needs to be allocated for the device
- * @num: number of resources
- * @data: platform specific data for this platform device
- * @size: size of platform specific data
- *
- * Returns &struct platform_device pointer on success, or ERR_PTR() on error.
- */
-static inline struct platform_device *platform_device_register_resndata(
-		struct device *parent, const char *name, int id,
-		const struct resource *res, unsigned int num,
-		const void *data, size_t size) {
-
-	struct platform_device_info pdevinfo = {
-		.parent = parent,
-		.name = name,
-		.id = id,
-		.res = res,
-		.num_res = num,
-		.data = data,
-		.size_data = size,
-		.dma_mask = 0,
-	};
-
-	return platform_device_register_full(&pdevinfo);
-}
-
-/**
- * platform_device_register_simple - add a platform-level device and its resources
- * @name: base name of the device we're adding
- * @id: instance id
- * @res: set of resources that needs to be allocated for the device
- * @num: number of resources
- *
- * This function creates a simple platform device that requires minimal
- * resource and memory management. Canned release function freeing memory
- * allocated for the device allows drivers using such devices to be
- * unloaded without waiting for the last reference to the device to be
- * dropped.
- *
- * This interface is primarily intended for use with legacy drivers which
- * probe hardware directly.  Because such drivers create sysfs device nodes
- * themselves, rather than letting system infrastructure handle such device
- * enumeration tasks, they don't fully conform to the Linux driver model.
- * In particular, when such drivers are built as modules, they can't be
- * "hotplugged".
- *
- * Returns &struct platform_device pointer on success, or ERR_PTR() on error.
- */
-static inline struct platform_device *platform_device_register_simple(
-		const char *name, int id,
-		const struct resource *res, unsigned int num)
-{
-	return platform_device_register_resndata(NULL, name, id,
-			res, num, NULL, 0);
-}
-
-/**
- * platform_device_register_data - add a platform-level device with platform-specific data
- * @parent: parent device for the device we're adding
- * @name: base name of the device we're adding
- * @id: instance id
- * @data: platform specific data for this platform device
- * @size: size of platform specific data
- *
- * This function creates a simple platform device that requires minimal
- * resource and memory management. Canned release function freeing memory
- * allocated for the device allows drivers using such devices to be
- * unloaded without waiting for the last reference to the device to be
- * dropped.
- *
- * Returns &struct platform_device pointer on success, or ERR_PTR() on error.
- */
-static inline struct platform_device *platform_device_register_data(
-		struct device *parent, const char *name, int id,
-		const void *data, size_t size)
-{
-	return platform_device_register_resndata(parent, name, id,
-			NULL, 0, data, size);
-}
-
-extern struct platform_device *platform_device_alloc(const char *name, int id);
-extern int platform_device_add_resources(struct platform_device *pdev,
-					 const struct resource *res,
-					 unsigned int num);
-extern int platform_device_add_data(struct platform_device *pdev, const void *data, size_t size);
-extern int platform_device_add(struct platform_device *pdev);
-extern void platform_device_del(struct platform_device *pdev);
-extern void platform_device_put(struct platform_device *pdev);
-
-struct platform_driver {
-	int (*probe)(struct platform_device *);
-	int (*remove)(struct platform_device *);
-	void (*shutdown)(struct platform_device *);
-	int (*suspend)(struct platform_device *, pm_message_t state);
-	int (*resume)(struct platform_device *);
-	struct device_driver driver;
-	const struct platform_device_id *id_table;
-};
-
-extern int platform_driver_register(struct platform_driver *);
-extern void platform_driver_unregister(struct platform_driver *);
-
-/* non-hotpluggable platform devices may use this so that probe() and
- * its support may live in __init sections, conserving runtime memory.
- */
-extern int platform_driver_probe(struct platform_driver *driver,
-		int (*probe)(struct platform_device *));
-
-static inline void *platform_get_drvdata(const struct platform_device *pdev)
-{
-	return dev_get_drvdata(&pdev->dev);
-}
-
-static inline void platform_set_drvdata(struct platform_device *pdev, void *data)
-{
-	dev_set_drvdata(&pdev->dev, data);
-}
-
-/* module_platform_driver() - Helper macro for drivers that don't do
- * anything special in module init/exit.  This eliminates a lot of
- * boilerplate.  Each module may only use this macro once, and
- * calling it replaces module_init() and module_exit()
- */
-#define module_platform_driver(__platform_driver) \
-	module_driver(__platform_driver, platform_driver_register, \
-			platform_driver_unregister)
-
-extern struct platform_device *platform_create_bundle(struct platform_driver *driver,
-					int (*probe)(struct platform_device *),
-					struct resource *res, unsigned int n_res,
-					const void *data, size_t size);
-
-/* early platform driver interface */
-struct early_platform_driver {
-	const char *class_str;
-	struct platform_driver *pdrv;
-	struct list_head list;
-	int requested_id;
-	char *buffer;
-	int bufsize;
-};
-
-#define EARLY_PLATFORM_ID_UNSET -2
-#define EARLY_PLATFORM_ID_ERROR -3
-
-extern int early_platform_driver_register(struct early_platform_driver *epdrv,
-					  char *buf);
-extern void early_platform_add_devices(struct platform_device **devs, int num);
-
-static inline int is_early_platform_device(struct platform_device *pdev)
-{
-	return !pdev->dev.driver;
-}
-
-extern void early_platform_driver_register_all(char *class_str);
-extern int early_platform_driver_probe(char *class_str,
-				       int nr_probe, int user_only);
-extern void early_platform_cleanup(void);
-
-#define early_platform_init(class_string, platdrv)		\
-	early_platform_init_buffer(class_string, platdrv, NULL, 0)
-
-#ifndef MODULE
-#define early_platform_init_buffer(class_string, platdrv, buf, bufsiz)	\
-static __initdata struct early_platform_driver early_driver = {		\
-	.class_str = class_string,					\
-	.buffer = buf,							\
-	.bufsize = bufsiz,						\
-	.pdrv = platdrv,						\
-	.requested_id = EARLY_PLATFORM_ID_UNSET,			\
-};									\
-static int __init early_platform_driver_setup_func(char *buffer)	\
-{									\
-	return early_platform_driver_register(&early_driver, buffer);	\
-}									\
-early_param(class_string, early_platform_driver_setup_func)
-#else /* MODULE */
-#define early_platform_init_buffer(class_string, platdrv, buf, bufsiz)	\
-static inline char *early_platform_driver_setup_func(void)		\
-{									\
-	return bufsiz ? buf : NULL;					\
-}
-#endif /* MODULE */
-
-#ifdef CONFIG_SUSPEND
-extern int platform_pm_suspend(struct device *dev);
-extern int platform_pm_resume(struct device *dev);
-#else
-#define platform_pm_suspend		NULL
-#define platform_pm_resume		NULL
-#endif
-
-#ifdef CONFIG_HIBERNATE_CALLBACKS
-extern int platform_pm_freeze(struct device *dev);
-extern int platform_pm_thaw(struct device *dev);
-extern int platform_pm_poweroff(struct device *dev);
-extern int platform_pm_restore(struct device *dev);
-#else
-#define platform_pm_freeze		NULL
-#define platform_pm_thaw		NULL
-#define platform_pm_poweroff		NULL
-#define platform_pm_restore		NULL
-#endif
-
-#ifdef CONFIG_PM_SLEEP
-#define USE_PLATFORM_PM_SLEEP_OPS \
-	.suspend = platform_pm_suspend, \
-	.resume = platform_pm_resume, \
-	.freeze = platform_pm_freeze, \
-	.thaw = platform_pm_thaw, \
-	.poweroff = platform_pm_poweroff, \
-	.restore = platform_pm_restore,
-#else
-#define USE_PLATFORM_PM_SLEEP_OPS
-#endif
-
-#endif /* _PLATFORM_DEVICE_H_ */
diff --git a/ANDROID_3.4.5/include/linux/plist.h b/ANDROID_3.4.5/include/linux/plist.h
deleted file mode 100644
index aa0fb390..00000000
--- a/ANDROID_3.4.5/include/linux/plist.h
+++ /dev/null
@@ -1,255 +0,0 @@
-/*
- * Descending-priority-sorted double-linked list
- *
- * (C) 2002-2003 Intel Corp
- * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>.
- *
- * 2001-2005 (c) MontaVista Software, Inc.
- * Daniel Walker <dwalker@mvista.com>
- *
- * (C) 2005 Thomas Gleixner <tglx@linutronix.de>
- *
- * Simplifications of the original code by
- * Oleg Nesterov <oleg@tv-sign.ru>
- *
- * Licensed under the FSF's GNU Public License v2 or later.
- *
- * Based on simple lists (include/linux/list.h).
- *
- * This is a priority-sorted list of nodes; each node has a
- * priority from INT_MIN (highest) to INT_MAX (lowest).
- *
- * Addition is O(K), removal is O(1), change of priority of a node is
- * O(K) and K is the number of RT priority levels used in the system.
- * (1 <= K <= 99)
- *
- * This list is really a list of lists:
- *
- *  - The tier 1 list is the prio_list, different priority nodes.
- *
- *  - The tier 2 list is the node_list, serialized nodes.
- *
- * Simple ASCII art explanation:
- *
- * pl:prio_list (only for plist_node)
- * nl:node_list
- *   HEAD|             NODE(S)
- *       |
- *       ||------------------------------------|
- *       ||->|pl|<->|pl|<--------------->|pl|<-|
- *       |   |10|   |21|   |21|   |21|   |40|   (prio)
- *       |   |  |   |  |   |  |   |  |   |  |
- *       |   |  |   |  |   |  |   |  |   |  |
- * |->|nl|<->|nl|<->|nl|<->|nl|<->|nl|<->|nl|<-|
- * |-------------------------------------------|
- *
- * The nodes on the prio_list list are sorted by priority to simplify
- * the insertion of new nodes. There are no nodes with duplicate
- * priorites on the list.
- *
- * The nodes on the node_list are ordered by priority and can contain
- * entries which have the same priority. Those entries are ordered
- * FIFO
- *
- * Addition means: look for the prio_list node in the prio_list
- * for the priority of the node and insert it before the node_list
- * entry of the next prio_list node. If it is the first node of
- * that priority, add it to the prio_list in the right position and
- * insert it into the serialized node_list list
- *
- * Removal means remove it from the node_list and remove it from
- * the prio_list if the node_list list_head is non empty. In case
- * of removal from the prio_list it must be checked whether other
- * entries of the same priority are on the list or not. If there
- * is another entry of the same priority then this entry has to
- * replace the removed entry on the prio_list. If the entry which
- * is removed is the only entry of this priority then a simple
- * remove from both list is sufficient.
- *
- * INT_MIN is the highest priority, 0 is the medium highest, INT_MAX
- * is lowest priority.
- *
- * No locking is done, up to the caller.
- *
- */
-#ifndef _LINUX_PLIST_H_
-#define _LINUX_PLIST_H_
-
-#include <linux/kernel.h>
-#include <linux/list.h>
-
-struct plist_head {
-	struct list_head node_list;
-};
-
-struct plist_node {
-	int			prio;
-	struct list_head	prio_list;
-	struct list_head	node_list;
-};
-
-/**
- * PLIST_HEAD_INIT - static struct plist_head initializer
- * @head:	struct plist_head variable name
- */
-#define PLIST_HEAD_INIT(head)				\
-{							\
-	.node_list = LIST_HEAD_INIT((head).node_list)	\
-}
-
-/**
- * PLIST_NODE_INIT - static struct plist_node initializer
- * @node:	struct plist_node variable name
- * @__prio:	initial node priority
- */
-#define PLIST_NODE_INIT(node, __prio)			\
-{							\
-	.prio  = (__prio),				\
-	.prio_list = LIST_HEAD_INIT((node).prio_list),	\
-	.node_list = LIST_HEAD_INIT((node).node_list),	\
-}
-
-/**
- * plist_head_init - dynamic struct plist_head initializer
- * @head:	&struct plist_head pointer
- */
-static inline void
-plist_head_init(struct plist_head *head)
-{
-	INIT_LIST_HEAD(&head->node_list);
-}
-
-/**
- * plist_node_init - Dynamic struct plist_node initializer
- * @node:	&struct plist_node pointer
- * @prio:	initial node priority
- */
-static inline void plist_node_init(struct plist_node *node, int prio)
-{
-	node->prio = prio;
-	INIT_LIST_HEAD(&node->prio_list);
-	INIT_LIST_HEAD(&node->node_list);
-}
-
-extern void plist_add(struct plist_node *node, struct plist_head *head);
-extern void plist_del(struct plist_node *node, struct plist_head *head);
-
-/**
- * plist_for_each - iterate over the plist
- * @pos:	the type * to use as a loop counter
- * @head:	the head for your list
- */
-#define plist_for_each(pos, head)	\
-	 list_for_each_entry(pos, &(head)->node_list, node_list)
-
-/**
- * plist_for_each_safe - iterate safely over a plist of given type
- * @pos:	the type * to use as a loop counter
- * @n:	another type * to use as temporary storage
- * @head:	the head for your list
- *
- * Iterate over a plist of given type, safe against removal of list entry.
- */
-#define plist_for_each_safe(pos, n, head)	\
-	 list_for_each_entry_safe(pos, n, &(head)->node_list, node_list)
-
-/**
- * plist_for_each_entry	- iterate over list of given type
- * @pos:	the type * to use as a loop counter
- * @head:	the head for your list
- * @mem:	the name of the list_struct within the struct
- */
-#define plist_for_each_entry(pos, head, mem)	\
-	 list_for_each_entry(pos, &(head)->node_list, mem.node_list)
-
-/**
- * plist_for_each_entry_safe - iterate safely over list of given type
- * @pos:	the type * to use as a loop counter
- * @n:		another type * to use as temporary storage
- * @head:	the head for your list
- * @m:		the name of the list_struct within the struct
- *
- * Iterate over list of given type, safe against removal of list entry.
- */
-#define plist_for_each_entry_safe(pos, n, head, m)	\
-	list_for_each_entry_safe(pos, n, &(head)->node_list, m.node_list)
-
-/**
- * plist_head_empty - return !0 if a plist_head is empty
- * @head:	&struct plist_head pointer
- */
-static inline int plist_head_empty(const struct plist_head *head)
-{
-	return list_empty(&head->node_list);
-}
-
-/**
- * plist_node_empty - return !0 if plist_node is not on a list
- * @node:	&struct plist_node pointer
- */
-static inline int plist_node_empty(const struct plist_node *node)
-{
-	return list_empty(&node->node_list);
-}
-
-/* All functions below assume the plist_head is not empty. */
-
-/**
- * plist_first_entry - get the struct for the first entry
- * @head:	the &struct plist_head pointer
- * @type:	the type of the struct this is embedded in
- * @member:	the name of the list_struct within the struct
- */
-#ifdef CONFIG_DEBUG_PI_LIST
-# define plist_first_entry(head, type, member)	\
-({ \
-	WARN_ON(plist_head_empty(head)); \
-	container_of(plist_first(head), type, member); \
-})
-#else
-# define plist_first_entry(head, type, member)	\
-	container_of(plist_first(head), type, member)
-#endif
-
-/**
- * plist_last_entry - get the struct for the last entry
- * @head:	the &struct plist_head pointer
- * @type:	the type of the struct this is embedded in
- * @member:	the name of the list_struct within the struct
- */
-#ifdef CONFIG_DEBUG_PI_LIST
-# define plist_last_entry(head, type, member)	\
-({ \
-	WARN_ON(plist_head_empty(head)); \
-	container_of(plist_last(head), type, member); \
-})
-#else
-# define plist_last_entry(head, type, member)	\
-	container_of(plist_last(head), type, member)
-#endif
-
-/**
- * plist_first - return the first node (and thus, highest priority)
- * @head:	the &struct plist_head pointer
- *
- * Assumes the plist is _not_ empty.
- */
-static inline struct plist_node *plist_first(const struct plist_head *head)
-{
-	return list_entry(head->node_list.next,
-			  struct plist_node, node_list);
-}
-
-/**
- * plist_last - return the last node (and thus, lowest priority)
- * @head:	the &struct plist_head pointer
- *
- * Assumes the plist is _not_ empty.
- */
-static inline struct plist_node *plist_last(const struct plist_head *head)
-{
-	return list_entry(head->node_list.prev,
-			  struct plist_node, node_list);
-}
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/pm.h b/ANDROID_3.4.5/include/linux/pm.h
deleted file mode 100644
index f067e60a..00000000
--- a/ANDROID_3.4.5/include/linux/pm.h
+++ /dev/null
@@ -1,698 +0,0 @@
-/*
- *  pm.h - Power management interface
- *
- *  Copyright (C) 2000 Andrew Henroid
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef _LINUX_PM_H
-#define _LINUX_PM_H
-
-#include <linux/list.h>
-#include <linux/workqueue.h>
-#include <linux/spinlock.h>
-#include <linux/wait.h>
-#include <linux/timer.h>
-#include <linux/completion.h>
-
-/*
- * Callbacks for platform drivers to implement.
- */
-extern void (*pm_idle)(void);
-extern void (*pm_power_off)(void);
-extern void (*pm_power_off_prepare)(void);
-
-/*
- * Device power management
- */
-
-struct device;
-
-#ifdef CONFIG_PM
-extern const char power_group_name[];		/* = "power" */
-#else
-#define power_group_name	NULL
-#endif
-
-typedef struct pm_message {
-	int event;
-} pm_message_t;
-
-/**
- * struct dev_pm_ops - device PM callbacks
- *
- * Several device power state transitions are externally visible, affecting
- * the state of pending I/O queues and (for drivers that touch hardware)
- * interrupts, wakeups, DMA, and other hardware state.  There may also be
- * internal transitions to various low-power modes which are transparent
- * to the rest of the driver stack (such as a driver that's ON gating off
- * clocks which are not in active use).
- *
- * The externally visible transitions are handled with the help of callbacks
- * included in this structure in such a way that two levels of callbacks are
- * involved.  First, the PM core executes callbacks provided by PM domains,
- * device types, classes and bus types.  They are the subsystem-level callbacks
- * supposed to execute callbacks provided by device drivers, although they may
- * choose not to do that.  If the driver callbacks are executed, they have to
- * collaborate with the subsystem-level callbacks to achieve the goals
- * appropriate for the given system transition, given transition phase and the
- * subsystem the device belongs to.
- *
- * @prepare: The principal role of this callback is to prevent new children of
- *	the device from being registered after it has returned (the driver's
- *	subsystem and generally the rest of the kernel is supposed to prevent
- *	new calls to the probe method from being made too once @prepare() has
- *	succeeded).  If @prepare() detects a situation it cannot handle (e.g.
- *	registration of a child already in progress), it may return -EAGAIN, so
- *	that the PM core can execute it once again (e.g. after a new child has
- *	been registered) to recover from the race condition.
- *	This method is executed for all kinds of suspend transitions and is
- *	followed by one of the suspend callbacks: @suspend(), @freeze(), or
- *	@poweroff().  The PM core executes subsystem-level @prepare() for all
- *	devices before starting to invoke suspend callbacks for any of them, so
- *	generally devices may be assumed to be functional or to respond to
- *	runtime resume requests while @prepare() is being executed.  However,
- *	device drivers may NOT assume anything about the availability of user
- *	space at that time and it is NOT valid to request firmware from within
- *	@prepare() (it's too late to do that).  It also is NOT valid to allocate
- *	substantial amounts of memory from @prepare() in the GFP_KERNEL mode.
- *	[To work around these limitations, drivers may register suspend and
- *	hibernation notifiers to be executed before the freezing of tasks.]
- *
- * @complete: Undo the changes made by @prepare().  This method is executed for
- *	all kinds of resume transitions, following one of the resume callbacks:
- *	@resume(), @thaw(), @restore().  Also called if the state transition
- *	fails before the driver's suspend callback: @suspend(), @freeze() or
- *	@poweroff(), can be executed (e.g. if the suspend callback fails for one
- *	of the other devices that the PM core has unsuccessfully attempted to
- *	suspend earlier).
- *	The PM core executes subsystem-level @complete() after it has executed
- *	the appropriate resume callbacks for all devices.
- *
- * @suspend: Executed before putting the system into a sleep state in which the
- *	contents of main memory are preserved.  The exact action to perform
- *	depends on the device's subsystem (PM domain, device type, class or bus
- *	type), but generally the device must be quiescent after subsystem-level
- *	@suspend() has returned, so that it doesn't do any I/O or DMA.
- *	Subsystem-level @suspend() is executed for all devices after invoking
- *	subsystem-level @prepare() for all of them.
- *
- * @suspend_late: Continue operations started by @suspend().  For a number of
- *	devices @suspend_late() may point to the same callback routine as the
- *	runtime suspend callback.
- *
- * @resume: Executed after waking the system up from a sleep state in which the
- *	contents of main memory were preserved.  The exact action to perform
- *	depends on the device's subsystem, but generally the driver is expected
- *	to start working again, responding to hardware events and software
- *	requests (the device itself may be left in a low-power state, waiting
- *	for a runtime resume to occur).  The state of the device at the time its
- *	driver's @resume() callback is run depends on the platform and subsystem
- *	the device belongs to.  On most platforms, there are no restrictions on
- *	availability of resources like clocks during @resume().
- *	Subsystem-level @resume() is executed for all devices after invoking
- *	subsystem-level @resume_noirq() for all of them.
- *
- * @resume_early: Prepare to execute @resume().  For a number of devices
- *	@resume_early() may point to the same callback routine as the runtime
- *	resume callback.
- *
- * @freeze: Hibernation-specific, executed before creating a hibernation image.
- *	Analogous to @suspend(), but it should not enable the device to signal
- *	wakeup events or change its power state.  The majority of subsystems
- *	(with the notable exception of the PCI bus type) expect the driver-level
- *	@freeze() to save the device settings in memory to be used by @restore()
- *	during the subsequent resume from hibernation.
- *	Subsystem-level @freeze() is executed for all devices after invoking
- *	subsystem-level @prepare() for all of them.
- *
- * @freeze_late: Continue operations started by @freeze().  Analogous to
- *	@suspend_late(), but it should not enable the device to signal wakeup
- *	events or change its power state.
- *
- * @thaw: Hibernation-specific, executed after creating a hibernation image OR
- *	if the creation of an image has failed.  Also executed after a failing
- *	attempt to restore the contents of main memory from such an image.
- *	Undo the changes made by the preceding @freeze(), so the device can be
- *	operated in the same way as immediately before the call to @freeze().
- *	Subsystem-level @thaw() is executed for all devices after invoking
- *	subsystem-level @thaw_noirq() for all of them.  It also may be executed
- *	directly after @freeze() in case of a transition error.
- *
- * @thaw_early: Prepare to execute @thaw().  Undo the changes made by the
- *	preceding @freeze_late().
- *
- * @poweroff: Hibernation-specific, executed after saving a hibernation image.
- *	Analogous to @suspend(), but it need not save the device's settings in
- *	memory.
- *	Subsystem-level @poweroff() is executed for all devices after invoking
- *	subsystem-level @prepare() for all of them.
- *
- * @poweroff_late: Continue operations started by @poweroff().  Analogous to
- *	@suspend_late(), but it need not save the device's settings in memory.
- *
- * @restore: Hibernation-specific, executed after restoring the contents of main
- *	memory from a hibernation image, analogous to @resume().
- *
- * @restore_early: Prepare to execute @restore(), analogous to @resume_early().
- *
- * @suspend_noirq: Complete the actions started by @suspend().  Carry out any
- *	additional operations required for suspending the device that might be
- *	racing with its driver's interrupt handler, which is guaranteed not to
- *	run while @suspend_noirq() is being executed.
- *	It generally is expected that the device will be in a low-power state
- *	(appropriate for the target system sleep state) after subsystem-level
- *	@suspend_noirq() has returned successfully.  If the device can generate
- *	system wakeup signals and is enabled to wake up the system, it should be
- *	configured to do so at that time.  However, depending on the platform
- *	and device's subsystem, @suspend() or @suspend_late() may be allowed to
- *	put the device into the low-power state and configure it to generate
- *	wakeup signals, in which case it generally is not necessary to define
- *	@suspend_noirq().
- *
- * @resume_noirq: Prepare for the execution of @resume() by carrying out any
- *	operations required for resuming the device that might be racing with
- *	its driver's interrupt handler, which is guaranteed not to run while
- *	@resume_noirq() is being executed.
- *
- * @freeze_noirq: Complete the actions started by @freeze().  Carry out any
- *	additional operations required for freezing the device that might be
- *	racing with its driver's interrupt handler, which is guaranteed not to
- *	run while @freeze_noirq() is being executed.
- *	The power state of the device should not be changed by either @freeze(),
- *	or @freeze_late(), or @freeze_noirq() and it should not be configured to
- *	signal system wakeup by any of these callbacks.
- *
- * @thaw_noirq: Prepare for the execution of @thaw() by carrying out any
- *	operations required for thawing the device that might be racing with its
- *	driver's interrupt handler, which is guaranteed not to run while
- *	@thaw_noirq() is being executed.
- *
- * @poweroff_noirq: Complete the actions started by @poweroff().  Analogous to
- *	@suspend_noirq(), but it need not save the device's settings in memory.
- *
- * @restore_noirq: Prepare for the execution of @restore() by carrying out any
- *	operations required for thawing the device that might be racing with its
- *	driver's interrupt handler, which is guaranteed not to run while
- *	@restore_noirq() is being executed.  Analogous to @resume_noirq().
- *
- * All of the above callbacks, except for @complete(), return error codes.
- * However, the error codes returned by the resume operations, @resume(),
- * @thaw(), @restore(), @resume_noirq(), @thaw_noirq(), and @restore_noirq(), do
- * not cause the PM core to abort the resume transition during which they are
- * returned.  The error codes returned in those cases are only printed by the PM
- * core to the system logs for debugging purposes.  Still, it is recommended
- * that drivers only return error codes from their resume methods in case of an
- * unrecoverable failure (i.e. when the device being handled refuses to resume
- * and becomes unusable) to allow us to modify the PM core in the future, so
- * that it can avoid attempting to handle devices that failed to resume and
- * their children.
- *
- * It is allowed to unregister devices while the above callbacks are being
- * executed.  However, a callback routine must NOT try to unregister the device
- * it was called for, although it may unregister children of that device (for
- * example, if it detects that a child was unplugged while the system was
- * asleep).
- *
- * Refer to Documentation/power/devices.txt for more information about the role
- * of the above callbacks in the system suspend process.
- *
- * There also are callbacks related to runtime power management of devices.
- * Again, these callbacks are executed by the PM core only for subsystems
- * (PM domains, device types, classes and bus types) and the subsystem-level
- * callbacks are supposed to invoke the driver callbacks.  Moreover, the exact
- * actions to be performed by a device driver's callbacks generally depend on
- * the platform and subsystem the device belongs to.
- *
- * @runtime_suspend: Prepare the device for a condition in which it won't be
- *	able to communicate with the CPU(s) and RAM due to power management.
- *	This need not mean that the device should be put into a low-power state.
- *	For example, if the device is behind a link which is about to be turned
- *	off, the device may remain at full power.  If the device does go to low
- *	power and is capable of generating runtime wakeup events, remote wakeup
- *	(i.e., a hardware mechanism allowing the device to request a change of
- *	its power state via an interrupt) should be enabled for it.
- *
- * @runtime_resume: Put the device into the fully active state in response to a
- *	wakeup event generated by hardware or at the request of software.  If
- *	necessary, put the device into the full-power state and restore its
- *	registers, so that it is fully operational.
- *
- * @runtime_idle: Device appears to be inactive and it might be put into a
- *	low-power state if all of the necessary conditions are satisfied.  Check
- *	these conditions and handle the device as appropriate, possibly queueing
- *	a suspend request for it.  The return value is ignored by the PM core.
- *
- * Refer to Documentation/power/runtime_pm.txt for more information about the
- * role of the above callbacks in device runtime power management.
- *
- */
-
-struct dev_pm_ops {
-	int (*prepare)(struct device *dev);
-	void (*complete)(struct device *dev);
-	int (*suspend)(struct device *dev);
-	int (*resume)(struct device *dev);
-	int (*freeze)(struct device *dev);
-	int (*thaw)(struct device *dev);
-	int (*poweroff)(struct device *dev);
-	int (*restore)(struct device *dev);
-	int (*suspend_late)(struct device *dev);
-	int (*resume_early)(struct device *dev);
-	int (*freeze_late)(struct device *dev);
-	int (*thaw_early)(struct device *dev);
-	int (*poweroff_late)(struct device *dev);
-	int (*restore_early)(struct device *dev);
-	int (*suspend_noirq)(struct device *dev);
-	int (*resume_noirq)(struct device *dev);
-	int (*freeze_noirq)(struct device *dev);
-	int (*thaw_noirq)(struct device *dev);
-	int (*poweroff_noirq)(struct device *dev);
-	int (*restore_noirq)(struct device *dev);
-	int (*runtime_suspend)(struct device *dev);
-	int (*runtime_resume)(struct device *dev);
-	int (*runtime_idle)(struct device *dev);
-};
-
-#ifdef CONFIG_PM_SLEEP
-#define SET_SYSTEM_SLEEP_PM_OPS(suspend_fn, resume_fn) \
-	.suspend = suspend_fn, \
-	.resume = resume_fn, \
-	.freeze = suspend_fn, \
-	.thaw = resume_fn, \
-	.poweroff = suspend_fn, \
-	.restore = resume_fn,
-#else
-#define SET_SYSTEM_SLEEP_PM_OPS(suspend_fn, resume_fn)
-#endif
-
-#ifdef CONFIG_PM_RUNTIME
-#define SET_RUNTIME_PM_OPS(suspend_fn, resume_fn, idle_fn) \
-	.runtime_suspend = suspend_fn, \
-	.runtime_resume = resume_fn, \
-	.runtime_idle = idle_fn,
-#else
-#define SET_RUNTIME_PM_OPS(suspend_fn, resume_fn, idle_fn)
-#endif
-
-/*
- * Use this if you want to use the same suspend and resume callbacks for suspend
- * to RAM and hibernation.
- */
-#define SIMPLE_DEV_PM_OPS(name, suspend_fn, resume_fn) \
-const struct dev_pm_ops name = { \
-	SET_SYSTEM_SLEEP_PM_OPS(suspend_fn, resume_fn) \
-}
-
-/*
- * Use this for defining a set of PM operations to be used in all situations
- * (sustem suspend, hibernation or runtime PM).
- * NOTE: In general, system suspend callbacks, .suspend() and .resume(), should
- * be different from the corresponding runtime PM callbacks, .runtime_suspend(),
- * and .runtime_resume(), because .runtime_suspend() always works on an already
- * quiescent device, while .suspend() should assume that the device may be doing
- * something when it is called (it should ensure that the device will be
- * quiescent after it has returned).  Therefore it's better to point the "late"
- * suspend and "early" resume callback pointers, .suspend_late() and
- * .resume_early(), to the same routines as .runtime_suspend() and
- * .runtime_resume(), respectively (and analogously for hibernation).
- */
-#define UNIVERSAL_DEV_PM_OPS(name, suspend_fn, resume_fn, idle_fn) \
-const struct dev_pm_ops name = { \
-	SET_SYSTEM_SLEEP_PM_OPS(suspend_fn, resume_fn) \
-	SET_RUNTIME_PM_OPS(suspend_fn, resume_fn, idle_fn) \
-}
-
-/**
- * PM_EVENT_ messages
- *
- * The following PM_EVENT_ messages are defined for the internal use of the PM
- * core, in order to provide a mechanism allowing the high level suspend and
- * hibernation code to convey the necessary information to the device PM core
- * code:
- *
- * ON		No transition.
- *
- * FREEZE 	System is going to hibernate, call ->prepare() and ->freeze()
- *		for all devices.
- *
- * SUSPEND	System is going to suspend, call ->prepare() and ->suspend()
- *		for all devices.
- *
- * HIBERNATE	Hibernation image has been saved, call ->prepare() and
- *		->poweroff() for all devices.
- *
- * QUIESCE	Contents of main memory are going to be restored from a (loaded)
- *		hibernation image, call ->prepare() and ->freeze() for all
- *		devices.
- *
- * RESUME	System is resuming, call ->resume() and ->complete() for all
- *		devices.
- *
- * THAW		Hibernation image has been created, call ->thaw() and
- *		->complete() for all devices.
- *
- * RESTORE	Contents of main memory have been restored from a hibernation
- *		image, call ->restore() and ->complete() for all devices.
- *
- * RECOVER	Creation of a hibernation image or restoration of the main
- *		memory contents from a hibernation image has failed, call
- *		->thaw() and ->complete() for all devices.
- *
- * The following PM_EVENT_ messages are defined for internal use by
- * kernel subsystems.  They are never issued by the PM core.
- *
- * USER_SUSPEND		Manual selective suspend was issued by userspace.
- *
- * USER_RESUME		Manual selective resume was issued by userspace.
- *
- * REMOTE_WAKEUP	Remote-wakeup request was received from the device.
- *
- * AUTO_SUSPEND		Automatic (device idle) runtime suspend was
- *			initiated by the subsystem.
- *
- * AUTO_RESUME		Automatic (device needed) runtime resume was
- *			requested by a driver.
- */
-
-#define PM_EVENT_INVALID	(-1)
-#define PM_EVENT_ON		0x0000
-#define PM_EVENT_FREEZE 	0x0001
-#define PM_EVENT_SUSPEND	0x0002
-#define PM_EVENT_HIBERNATE	0x0004
-#define PM_EVENT_QUIESCE	0x0008
-#define PM_EVENT_RESUME		0x0010
-#define PM_EVENT_THAW		0x0020
-#define PM_EVENT_RESTORE	0x0040
-#define PM_EVENT_RECOVER	0x0080
-#define PM_EVENT_USER		0x0100
-#define PM_EVENT_REMOTE		0x0200
-#define PM_EVENT_AUTO		0x0400
-
-#define PM_EVENT_SLEEP		(PM_EVENT_SUSPEND | PM_EVENT_HIBERNATE)
-#define PM_EVENT_USER_SUSPEND	(PM_EVENT_USER | PM_EVENT_SUSPEND)
-#define PM_EVENT_USER_RESUME	(PM_EVENT_USER | PM_EVENT_RESUME)
-#define PM_EVENT_REMOTE_RESUME	(PM_EVENT_REMOTE | PM_EVENT_RESUME)
-#define PM_EVENT_AUTO_SUSPEND	(PM_EVENT_AUTO | PM_EVENT_SUSPEND)
-#define PM_EVENT_AUTO_RESUME	(PM_EVENT_AUTO | PM_EVENT_RESUME)
-
-#define PMSG_INVALID	((struct pm_message){ .event = PM_EVENT_INVALID, })
-#define PMSG_ON		((struct pm_message){ .event = PM_EVENT_ON, })
-#define PMSG_FREEZE	((struct pm_message){ .event = PM_EVENT_FREEZE, })
-#define PMSG_QUIESCE	((struct pm_message){ .event = PM_EVENT_QUIESCE, })
-#define PMSG_SUSPEND	((struct pm_message){ .event = PM_EVENT_SUSPEND, })
-#define PMSG_HIBERNATE	((struct pm_message){ .event = PM_EVENT_HIBERNATE, })
-#define PMSG_RESUME	((struct pm_message){ .event = PM_EVENT_RESUME, })
-#define PMSG_THAW	((struct pm_message){ .event = PM_EVENT_THAW, })
-#define PMSG_RESTORE	((struct pm_message){ .event = PM_EVENT_RESTORE, })
-#define PMSG_RECOVER	((struct pm_message){ .event = PM_EVENT_RECOVER, })
-#define PMSG_USER_SUSPEND	((struct pm_message) \
-					{ .event = PM_EVENT_USER_SUSPEND, })
-#define PMSG_USER_RESUME	((struct pm_message) \
-					{ .event = PM_EVENT_USER_RESUME, })
-#define PMSG_REMOTE_RESUME	((struct pm_message) \
-					{ .event = PM_EVENT_REMOTE_RESUME, })
-#define PMSG_AUTO_SUSPEND	((struct pm_message) \
-					{ .event = PM_EVENT_AUTO_SUSPEND, })
-#define PMSG_AUTO_RESUME	((struct pm_message) \
-					{ .event = PM_EVENT_AUTO_RESUME, })
-
-#define PMSG_IS_AUTO(msg)	(((msg).event & PM_EVENT_AUTO) != 0)
-
-/**
- * Device run-time power management status.
- *
- * These status labels are used internally by the PM core to indicate the
- * current status of a device with respect to the PM core operations.  They do
- * not reflect the actual power state of the device or its status as seen by the
- * driver.
- *
- * RPM_ACTIVE		Device is fully operational.  Indicates that the device
- *			bus type's ->runtime_resume() callback has completed
- *			successfully.
- *
- * RPM_SUSPENDED	Device bus type's ->runtime_suspend() callback has
- *			completed successfully.  The device is regarded as
- *			suspended.
- *
- * RPM_RESUMING		Device bus type's ->runtime_resume() callback is being
- *			executed.
- *
- * RPM_SUSPENDING	Device bus type's ->runtime_suspend() callback is being
- *			executed.
- */
-
-enum rpm_status {
-	RPM_ACTIVE = 0,
-	RPM_RESUMING,
-	RPM_SUSPENDED,
-	RPM_SUSPENDING,
-};
-
-/**
- * Device run-time power management request types.
- *
- * RPM_REQ_NONE		Do nothing.
- *
- * RPM_REQ_IDLE		Run the device bus type's ->runtime_idle() callback
- *
- * RPM_REQ_SUSPEND	Run the device bus type's ->runtime_suspend() callback
- *
- * RPM_REQ_AUTOSUSPEND	Same as RPM_REQ_SUSPEND, but not until the device has
- *			been inactive for as long as power.autosuspend_delay
- *
- * RPM_REQ_RESUME	Run the device bus type's ->runtime_resume() callback
- */
-
-enum rpm_request {
-	RPM_REQ_NONE = 0,
-	RPM_REQ_IDLE,
-	RPM_REQ_SUSPEND,
-	RPM_REQ_AUTOSUSPEND,
-	RPM_REQ_RESUME,
-};
-
-struct wakeup_source;
-
-struct pm_domain_data {
-	struct list_head list_node;
-	struct device *dev;
-};
-
-struct pm_subsys_data {
-	spinlock_t lock;
-	unsigned int refcount;
-#ifdef CONFIG_PM_CLK
-	struct list_head clock_list;
-#endif
-#ifdef CONFIG_PM_GENERIC_DOMAINS
-	struct pm_domain_data *domain_data;
-#endif
-};
-
-struct dev_pm_info {
-	pm_message_t		power_state;
-	unsigned int		can_wakeup:1;
-	unsigned int		async_suspend:1;
-	bool			is_prepared:1;	/* Owned by the PM core */
-	bool			is_suspended:1;	/* Ditto */
-	bool			ignore_children:1;
-	spinlock_t		lock;
-#ifdef CONFIG_PM_SLEEP
-	struct list_head	entry;
-	struct completion	completion;
-	struct wakeup_source	*wakeup;
-	bool			wakeup_path:1;
-#else
-	unsigned int		should_wakeup:1;
-#endif
-#ifdef CONFIG_PM_RUNTIME
-	struct timer_list	suspend_timer;
-	unsigned long		timer_expires;
-	struct work_struct	work;
-	wait_queue_head_t	wait_queue;
-	atomic_t		usage_count;
-	atomic_t		child_count;
-	unsigned int		disable_depth:3;
-	unsigned int		idle_notification:1;
-	unsigned int		request_pending:1;
-	unsigned int		deferred_resume:1;
-	unsigned int		run_wake:1;
-	unsigned int		runtime_auto:1;
-	unsigned int		no_callbacks:1;
-	unsigned int		irq_safe:1;
-	unsigned int		use_autosuspend:1;
-	unsigned int		timer_autosuspends:1;
-	enum rpm_request	request;
-	enum rpm_status		runtime_status;
-	int			runtime_error;
-	int			autosuspend_delay;
-	unsigned long		last_busy;
-	unsigned long		active_jiffies;
-	unsigned long		suspended_jiffies;
-	unsigned long		accounting_timestamp;
-	struct dev_pm_qos_request *pq_req;
-#endif
-	struct pm_subsys_data	*subsys_data;  /* Owned by the subsystem. */
-	struct pm_qos_constraints *constraints;
-};
-
-extern void update_pm_runtime_accounting(struct device *dev);
-extern int dev_pm_get_subsys_data(struct device *dev);
-extern int dev_pm_put_subsys_data(struct device *dev);
-
-/*
- * Power domains provide callbacks that are executed during system suspend,
- * hibernation, system resume and during runtime PM transitions along with
- * subsystem-level and driver-level callbacks.
- */
-struct dev_pm_domain {
-	struct dev_pm_ops	ops;
-};
-
-/*
- * The PM_EVENT_ messages are also used by drivers implementing the legacy
- * suspend framework, based on the ->suspend() and ->resume() callbacks common
- * for suspend and hibernation transitions, according to the rules below.
- */
-
-/* Necessary, because several drivers use PM_EVENT_PRETHAW */
-#define PM_EVENT_PRETHAW PM_EVENT_QUIESCE
-
-/*
- * One transition is triggered by resume(), after a suspend() call; the
- * message is implicit:
- *
- * ON		Driver starts working again, responding to hardware events
- * 		and software requests.  The hardware may have gone through
- * 		a power-off reset, or it may have maintained state from the
- * 		previous suspend() which the driver will rely on while
- * 		resuming.  On most platforms, there are no restrictions on
- * 		availability of resources like clocks during resume().
- *
- * Other transitions are triggered by messages sent using suspend().  All
- * these transitions quiesce the driver, so that I/O queues are inactive.
- * That commonly entails turning off IRQs and DMA; there may be rules
- * about how to quiesce that are specific to the bus or the device's type.
- * (For example, network drivers mark the link state.)  Other details may
- * differ according to the message:
- *
- * SUSPEND	Quiesce, enter a low power device state appropriate for
- * 		the upcoming system state (such as PCI_D3hot), and enable
- * 		wakeup events as appropriate.
- *
- * HIBERNATE	Enter a low power device state appropriate for the hibernation
- * 		state (eg. ACPI S4) and enable wakeup events as appropriate.
- *
- * FREEZE	Quiesce operations so that a consistent image can be saved;
- * 		but do NOT otherwise enter a low power device state, and do
- * 		NOT emit system wakeup events.
- *
- * PRETHAW	Quiesce as if for FREEZE; additionally, prepare for restoring
- * 		the system from a snapshot taken after an earlier FREEZE.
- * 		Some drivers will need to reset their hardware state instead
- * 		of preserving it, to ensure that it's never mistaken for the
- * 		state which that earlier snapshot had set up.
- *
- * A minimally power-aware driver treats all messages as SUSPEND, fully
- * reinitializes its device during resume() -- whether or not it was reset
- * during the suspend/resume cycle -- and can't issue wakeup events.
- *
- * More power-aware drivers may also use low power states at runtime as
- * well as during system sleep states like PM_SUSPEND_STANDBY.  They may
- * be able to use wakeup events to exit from runtime low-power states,
- * or from system low-power states such as standby or suspend-to-RAM.
- */
-
-#ifdef CONFIG_PM_SLEEP
-extern void device_pm_lock(void);
-extern void dpm_resume_start(pm_message_t state);
-extern void dpm_resume_end(pm_message_t state);
-extern void dpm_resume(pm_message_t state);
-extern void dpm_complete(pm_message_t state);
-
-extern void device_pm_unlock(void);
-extern int dpm_suspend_end(pm_message_t state);
-extern int dpm_suspend_start(pm_message_t state);
-extern int dpm_suspend(pm_message_t state);
-extern int dpm_prepare(pm_message_t state);
-
-extern void __suspend_report_result(const char *function, void *fn, int ret);
-
-#define suspend_report_result(fn, ret)					\
-	do {								\
-		__suspend_report_result(__func__, fn, ret);		\
-	} while (0)
-
-extern int device_pm_wait_for_dev(struct device *sub, struct device *dev);
-
-extern int pm_generic_prepare(struct device *dev);
-extern int pm_generic_suspend_late(struct device *dev);
-extern int pm_generic_suspend_noirq(struct device *dev);
-extern int pm_generic_suspend(struct device *dev);
-extern int pm_generic_resume_early(struct device *dev);
-extern int pm_generic_resume_noirq(struct device *dev);
-extern int pm_generic_resume(struct device *dev);
-extern int pm_generic_freeze_noirq(struct device *dev);
-extern int pm_generic_freeze_late(struct device *dev);
-extern int pm_generic_freeze(struct device *dev);
-extern int pm_generic_thaw_noirq(struct device *dev);
-extern int pm_generic_thaw_early(struct device *dev);
-extern int pm_generic_thaw(struct device *dev);
-extern int pm_generic_restore_noirq(struct device *dev);
-extern int pm_generic_restore_early(struct device *dev);
-extern int pm_generic_restore(struct device *dev);
-extern int pm_generic_poweroff_noirq(struct device *dev);
-extern int pm_generic_poweroff_late(struct device *dev);
-extern int pm_generic_poweroff(struct device *dev);
-extern void pm_generic_complete(struct device *dev);
-
-#else /* !CONFIG_PM_SLEEP */
-
-#define device_pm_lock() do {} while (0)
-#define device_pm_unlock() do {} while (0)
-
-static inline int dpm_suspend_start(pm_message_t state)
-{
-	return 0;
-}
-
-#define suspend_report_result(fn, ret)		do {} while (0)
-
-static inline int device_pm_wait_for_dev(struct device *a, struct device *b)
-{
-	return 0;
-}
-
-#define pm_generic_prepare	NULL
-#define pm_generic_suspend	NULL
-#define pm_generic_resume	NULL
-#define pm_generic_freeze	NULL
-#define pm_generic_thaw		NULL
-#define pm_generic_restore	NULL
-#define pm_generic_poweroff	NULL
-#define pm_generic_complete	NULL
-#endif /* !CONFIG_PM_SLEEP */
-
-/* How to reorder dpm_list after device_move() */
-enum dpm_order {
-	DPM_ORDER_NONE,
-	DPM_ORDER_DEV_AFTER_PARENT,
-	DPM_ORDER_PARENT_BEFORE_DEV,
-	DPM_ORDER_DEV_LAST,
-};
-
-#endif /* _LINUX_PM_H */
diff --git a/ANDROID_3.4.5/include/linux/pm_clock.h b/ANDROID_3.4.5/include/linux/pm_clock.h
deleted file mode 100644
index 8348866e..00000000
--- a/ANDROID_3.4.5/include/linux/pm_clock.h
+++ /dev/null
@@ -1,71 +0,0 @@
-/*
- * pm_clock.h - Definitions and headers related to device clocks.
- *
- * Copyright (C) 2011 Rafael J. Wysocki <rjw@sisk.pl>, Renesas Electronics Corp.
- *
- * This file is released under the GPLv2.
- */
-
-#ifndef _LINUX_PM_CLOCK_H
-#define _LINUX_PM_CLOCK_H
-
-#include <linux/device.h>
-#include <linux/notifier.h>
-
-struct pm_clk_notifier_block {
-	struct notifier_block nb;
-	struct dev_pm_domain *pm_domain;
-	char *con_ids[];
-};
-
-#ifdef CONFIG_PM_CLK
-static inline bool pm_clk_no_clocks(struct device *dev)
-{
-	return dev && dev->power.subsys_data
-		&& list_empty(&dev->power.subsys_data->clock_list);
-}
-
-extern void pm_clk_init(struct device *dev);
-extern int pm_clk_create(struct device *dev);
-extern void pm_clk_destroy(struct device *dev);
-extern int pm_clk_add(struct device *dev, const char *con_id);
-extern void pm_clk_remove(struct device *dev, const char *con_id);
-extern int pm_clk_suspend(struct device *dev);
-extern int pm_clk_resume(struct device *dev);
-#else
-static inline bool pm_clk_no_clocks(struct device *dev)
-{
-	return true;
-}
-static inline void pm_clk_init(struct device *dev)
-{
-}
-static inline int pm_clk_create(struct device *dev)
-{
-	return -EINVAL;
-}
-static inline void pm_clk_destroy(struct device *dev)
-{
-}
-static inline int pm_clk_add(struct device *dev, const char *con_id)
-{
-	return -EINVAL;
-}
-static inline void pm_clk_remove(struct device *dev, const char *con_id)
-{
-}
-#define pm_clk_suspend	NULL
-#define pm_clk_resume	NULL
-#endif
-
-#ifdef CONFIG_HAVE_CLK
-extern void pm_clk_add_notifier(struct bus_type *bus,
-					struct pm_clk_notifier_block *clknb);
-#else
-static inline void pm_clk_add_notifier(struct bus_type *bus,
-					struct pm_clk_notifier_block *clknb)
-{
-}
-#endif
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/pm_domain.h b/ANDROID_3.4.5/include/linux/pm_domain.h
deleted file mode 100644
index 30f794eb..00000000
--- a/ANDROID_3.4.5/include/linux/pm_domain.h
+++ /dev/null
@@ -1,243 +0,0 @@
-/*
- * pm_domain.h - Definitions and headers related to device power domains.
- *
- * Copyright (C) 2011 Rafael J. Wysocki <rjw@sisk.pl>, Renesas Electronics Corp.
- *
- * This file is released under the GPLv2.
- */
-
-#ifndef _LINUX_PM_DOMAIN_H
-#define _LINUX_PM_DOMAIN_H
-
-#include <linux/device.h>
-#include <linux/mutex.h>
-#include <linux/pm.h>
-#include <linux/err.h>
-#include <linux/of.h>
-#include <linux/notifier.h>
-
-enum gpd_status {
-	GPD_STATE_ACTIVE = 0,	/* PM domain is active */
-	GPD_STATE_WAIT_MASTER,	/* PM domain's master is being waited for */
-	GPD_STATE_BUSY,		/* Something is happening to the PM domain */
-	GPD_STATE_REPEAT,	/* Power off in progress, to be repeated */
-	GPD_STATE_POWER_OFF,	/* PM domain is off */
-};
-
-struct dev_power_governor {
-	bool (*power_down_ok)(struct dev_pm_domain *domain);
-	bool (*stop_ok)(struct device *dev);
-};
-
-struct gpd_dev_ops {
-	int (*start)(struct device *dev);
-	int (*stop)(struct device *dev);
-	int (*save_state)(struct device *dev);
-	int (*restore_state)(struct device *dev);
-	int (*suspend)(struct device *dev);
-	int (*suspend_late)(struct device *dev);
-	int (*resume_early)(struct device *dev);
-	int (*resume)(struct device *dev);
-	int (*freeze)(struct device *dev);
-	int (*freeze_late)(struct device *dev);
-	int (*thaw_early)(struct device *dev);
-	int (*thaw)(struct device *dev);
-	bool (*active_wakeup)(struct device *dev);
-};
-
-struct generic_pm_domain {
-	struct dev_pm_domain domain;	/* PM domain operations */
-	struct list_head gpd_list_node;	/* Node in the global PM domains list */
-	struct list_head master_links;	/* Links with PM domain as a master */
-	struct list_head slave_links;	/* Links with PM domain as a slave */
-	struct list_head dev_list;	/* List of devices */
-	struct mutex lock;
-	struct dev_power_governor *gov;
-	struct work_struct power_off_work;
-	char *name;
-	unsigned int in_progress;	/* Number of devices being suspended now */
-	atomic_t sd_count;	/* Number of subdomains with power "on" */
-	enum gpd_status status;	/* Current state of the domain */
-	wait_queue_head_t status_wait_queue;
-	struct task_struct *poweroff_task;	/* Powering off task */
-	unsigned int resume_count;	/* Number of devices being resumed */
-	unsigned int device_count;	/* Number of devices */
-	unsigned int suspended_count;	/* System suspend device counter */
-	unsigned int prepared_count;	/* Suspend counter of prepared devices */
-	bool suspend_power_off;	/* Power status before system suspend */
-	bool dev_irq_safe;	/* Device callbacks are IRQ-safe */
-	int (*power_off)(struct generic_pm_domain *domain);
-	s64 power_off_latency_ns;
-	int (*power_on)(struct generic_pm_domain *domain);
-	s64 power_on_latency_ns;
-	struct gpd_dev_ops dev_ops;
-	s64 max_off_time_ns;	/* Maximum allowed "suspended" time. */
-	bool max_off_time_changed;
-	bool cached_power_down_ok;
-	struct device_node *of_node; /* Node in device tree */
-};
-
-static inline struct generic_pm_domain *pd_to_genpd(struct dev_pm_domain *pd)
-{
-	return container_of(pd, struct generic_pm_domain, domain);
-}
-
-struct gpd_link {
-	struct generic_pm_domain *master;
-	struct list_head master_node;
-	struct generic_pm_domain *slave;
-	struct list_head slave_node;
-};
-
-struct gpd_timing_data {
-	s64 stop_latency_ns;
-	s64 start_latency_ns;
-	s64 save_state_latency_ns;
-	s64 restore_state_latency_ns;
-	s64 effective_constraint_ns;
-	bool constraint_changed;
-	bool cached_stop_ok;
-};
-
-struct generic_pm_domain_data {
-	struct pm_domain_data base;
-	struct gpd_dev_ops ops;
-	struct gpd_timing_data td;
-	struct notifier_block nb;
-	struct mutex lock;
-	bool need_restore;
-	bool always_on;
-};
-
-#ifdef CONFIG_PM_GENERIC_DOMAINS
-static inline struct generic_pm_domain_data *to_gpd_data(struct pm_domain_data *pdd)
-{
-	return container_of(pdd, struct generic_pm_domain_data, base);
-}
-
-static inline struct generic_pm_domain_data *dev_gpd_data(struct device *dev)
-{
-	return to_gpd_data(dev->power.subsys_data->domain_data);
-}
-
-extern struct dev_power_governor simple_qos_governor;
-
-extern struct generic_pm_domain *dev_to_genpd(struct device *dev);
-extern int __pm_genpd_add_device(struct generic_pm_domain *genpd,
-				 struct device *dev,
-				 struct gpd_timing_data *td);
-
-extern int __pm_genpd_of_add_device(struct device_node *genpd_node,
-				    struct device *dev,
-				    struct gpd_timing_data *td);
-
-static inline int pm_genpd_add_device(struct generic_pm_domain *genpd,
-				      struct device *dev)
-{
-	return __pm_genpd_add_device(genpd, dev, NULL);
-}
-
-static inline int pm_genpd_of_add_device(struct device_node *genpd_node,
-					 struct device *dev)
-{
-	return __pm_genpd_of_add_device(genpd_node, dev, NULL);
-}
-
-extern int pm_genpd_remove_device(struct generic_pm_domain *genpd,
-				  struct device *dev);
-extern void pm_genpd_dev_always_on(struct device *dev, bool val);
-extern void pm_genpd_dev_need_restore(struct device *dev, bool val);
-extern int pm_genpd_add_subdomain(struct generic_pm_domain *genpd,
-				  struct generic_pm_domain *new_subdomain);
-extern int pm_genpd_remove_subdomain(struct generic_pm_domain *genpd,
-				     struct generic_pm_domain *target);
-extern int pm_genpd_add_callbacks(struct device *dev,
-				  struct gpd_dev_ops *ops,
-				  struct gpd_timing_data *td);
-extern int __pm_genpd_remove_callbacks(struct device *dev, bool clear_td);
-extern void pm_genpd_init(struct generic_pm_domain *genpd,
-			  struct dev_power_governor *gov, bool is_off);
-
-extern int pm_genpd_poweron(struct generic_pm_domain *genpd);
-
-extern bool default_stop_ok(struct device *dev);
-
-extern struct dev_power_governor pm_domain_always_on_gov;
-#else
-
-static inline struct generic_pm_domain_data *dev_gpd_data(struct device *dev)
-{
-	return ERR_PTR(-ENOSYS);
-}
-static inline struct generic_pm_domain *dev_to_genpd(struct device *dev)
-{
-	return ERR_PTR(-ENOSYS);
-}
-static inline int __pm_genpd_add_device(struct generic_pm_domain *genpd,
-					struct device *dev,
-					struct gpd_timing_data *td)
-{
-	return -ENOSYS;
-}
-static inline int pm_genpd_add_device(struct generic_pm_domain *genpd,
-				      struct device *dev)
-{
-	return -ENOSYS;
-}
-static inline int pm_genpd_remove_device(struct generic_pm_domain *genpd,
-					 struct device *dev)
-{
-	return -ENOSYS;
-}
-static inline void pm_genpd_dev_always_on(struct device *dev, bool val) {}
-static inline void pm_genpd_dev_need_restore(struct device *dev, bool val) {}
-static inline int pm_genpd_add_subdomain(struct generic_pm_domain *genpd,
-					 struct generic_pm_domain *new_sd)
-{
-	return -ENOSYS;
-}
-static inline int pm_genpd_remove_subdomain(struct generic_pm_domain *genpd,
-					    struct generic_pm_domain *target)
-{
-	return -ENOSYS;
-}
-static inline int pm_genpd_add_callbacks(struct device *dev,
-					 struct gpd_dev_ops *ops,
-					 struct gpd_timing_data *td)
-{
-	return -ENOSYS;
-}
-static inline int __pm_genpd_remove_callbacks(struct device *dev, bool clear_td)
-{
-	return -ENOSYS;
-}
-static inline void pm_genpd_init(struct generic_pm_domain *genpd,
-				 struct dev_power_governor *gov, bool is_off)
-{
-}
-static inline int pm_genpd_poweron(struct generic_pm_domain *genpd)
-{
-	return -ENOSYS;
-}
-static inline bool default_stop_ok(struct device *dev)
-{
-	return false;
-}
-#define simple_qos_governor NULL
-#define pm_domain_always_on_gov NULL
-#endif
-
-static inline int pm_genpd_remove_callbacks(struct device *dev)
-{
-	return __pm_genpd_remove_callbacks(dev, true);
-}
-
-#ifdef CONFIG_PM_GENERIC_DOMAINS_RUNTIME
-extern void genpd_queue_power_off_work(struct generic_pm_domain *genpd);
-extern void pm_genpd_poweroff_unused(void);
-#else
-static inline void genpd_queue_power_off_work(struct generic_pm_domain *gpd) {}
-static inline void pm_genpd_poweroff_unused(void) {}
-#endif
-
-#endif /* _LINUX_PM_DOMAIN_H */
diff --git a/ANDROID_3.4.5/include/linux/pm_qos.h b/ANDROID_3.4.5/include/linux/pm_qos.h
deleted file mode 100644
index 233149cb..00000000
--- a/ANDROID_3.4.5/include/linux/pm_qos.h
+++ /dev/null
@@ -1,153 +0,0 @@
-#ifndef _LINUX_PM_QOS_H
-#define _LINUX_PM_QOS_H
-/* interface for the pm_qos_power infrastructure of the linux kernel.
- *
- * Mark Gross <mgross@linux.intel.com>
- */
-#include <linux/plist.h>
-#include <linux/notifier.h>
-#include <linux/miscdevice.h>
-#include <linux/device.h>
-#include <linux/workqueue.h>
-
-enum {
-	PM_QOS_RESERVED = 0,
-	PM_QOS_CPU_DMA_LATENCY,
-	PM_QOS_NETWORK_LATENCY,
-	PM_QOS_NETWORK_THROUGHPUT,
-
-	/* insert new class ID */
-	PM_QOS_NUM_CLASSES,
-};
-
-#define PM_QOS_DEFAULT_VALUE -1
-
-#define PM_QOS_CPU_DMA_LAT_DEFAULT_VALUE	(2000 * USEC_PER_SEC)
-#define PM_QOS_NETWORK_LAT_DEFAULT_VALUE	(2000 * USEC_PER_SEC)
-#define PM_QOS_NETWORK_THROUGHPUT_DEFAULT_VALUE	0
-#define PM_QOS_DEV_LAT_DEFAULT_VALUE		0
-
-struct pm_qos_request {
-	struct plist_node node;
-	int pm_qos_class;
-	struct delayed_work work; /* for pm_qos_update_request_timeout */
-};
-
-struct dev_pm_qos_request {
-	struct plist_node node;
-	struct device *dev;
-};
-
-enum pm_qos_type {
-	PM_QOS_UNITIALIZED,
-	PM_QOS_MAX,		/* return the largest value */
-	PM_QOS_MIN		/* return the smallest value */
-};
-
-/*
- * Note: The lockless read path depends on the CPU accessing
- * target_value atomically.  Atomic access is only guaranteed on all CPU
- * types linux supports for 32 bit quantites
- */
-struct pm_qos_constraints {
-	struct plist_head list;
-	s32 target_value;	/* Do not change to 64 bit */
-	s32 default_value;
-	enum pm_qos_type type;
-	struct blocking_notifier_head *notifiers;
-};
-
-/* Action requested to pm_qos_update_target */
-enum pm_qos_req_action {
-	PM_QOS_ADD_REQ,		/* Add a new request */
-	PM_QOS_UPDATE_REQ,	/* Update an existing request */
-	PM_QOS_REMOVE_REQ	/* Remove an existing request */
-};
-
-static inline int dev_pm_qos_request_active(struct dev_pm_qos_request *req)
-{
-	return req->dev != 0;
-}
-
-int pm_qos_update_target(struct pm_qos_constraints *c, struct plist_node *node,
-			 enum pm_qos_req_action action, int value);
-void pm_qos_add_request(struct pm_qos_request *req, int pm_qos_class,
-			s32 value);
-void pm_qos_update_request(struct pm_qos_request *req,
-			   s32 new_value);
-void pm_qos_update_request_timeout(struct pm_qos_request *req,
-				   s32 new_value, unsigned long timeout_us);
-void pm_qos_remove_request(struct pm_qos_request *req);
-
-int pm_qos_request(int pm_qos_class);
-int pm_qos_add_notifier(int pm_qos_class, struct notifier_block *notifier);
-int pm_qos_remove_notifier(int pm_qos_class, struct notifier_block *notifier);
-int pm_qos_request_active(struct pm_qos_request *req);
-s32 pm_qos_read_value(struct pm_qos_constraints *c);
-
-#ifdef CONFIG_PM
-s32 __dev_pm_qos_read_value(struct device *dev);
-s32 dev_pm_qos_read_value(struct device *dev);
-int dev_pm_qos_add_request(struct device *dev, struct dev_pm_qos_request *req,
-			   s32 value);
-int dev_pm_qos_update_request(struct dev_pm_qos_request *req, s32 new_value);
-int dev_pm_qos_remove_request(struct dev_pm_qos_request *req);
-int dev_pm_qos_add_notifier(struct device *dev,
-			    struct notifier_block *notifier);
-int dev_pm_qos_remove_notifier(struct device *dev,
-			       struct notifier_block *notifier);
-int dev_pm_qos_add_global_notifier(struct notifier_block *notifier);
-int dev_pm_qos_remove_global_notifier(struct notifier_block *notifier);
-void dev_pm_qos_constraints_init(struct device *dev);
-void dev_pm_qos_constraints_destroy(struct device *dev);
-int dev_pm_qos_add_ancestor_request(struct device *dev,
-				    struct dev_pm_qos_request *req, s32 value);
-#else
-static inline s32 __dev_pm_qos_read_value(struct device *dev)
-			{ return 0; }
-static inline s32 dev_pm_qos_read_value(struct device *dev)
-			{ return 0; }
-static inline int dev_pm_qos_add_request(struct device *dev,
-					 struct dev_pm_qos_request *req,
-					 s32 value)
-			{ return 0; }
-static inline int dev_pm_qos_update_request(struct dev_pm_qos_request *req,
-					    s32 new_value)
-			{ return 0; }
-static inline int dev_pm_qos_remove_request(struct dev_pm_qos_request *req)
-			{ return 0; }
-static inline int dev_pm_qos_add_notifier(struct device *dev,
-					  struct notifier_block *notifier)
-			{ return 0; }
-static inline int dev_pm_qos_remove_notifier(struct device *dev,
-					     struct notifier_block *notifier)
-			{ return 0; }
-static inline int dev_pm_qos_add_global_notifier(
-					struct notifier_block *notifier)
-			{ return 0; }
-static inline int dev_pm_qos_remove_global_notifier(
-					struct notifier_block *notifier)
-			{ return 0; }
-static inline void dev_pm_qos_constraints_init(struct device *dev)
-{
-	dev->power.power_state = PMSG_ON;
-}
-static inline void dev_pm_qos_constraints_destroy(struct device *dev)
-{
-	dev->power.power_state = PMSG_INVALID;
-}
-static inline int dev_pm_qos_add_ancestor_request(struct device *dev,
-				    struct dev_pm_qos_request *req, s32 value)
-			{ return 0; }
-#endif
-
-#ifdef CONFIG_PM_RUNTIME
-int dev_pm_qos_expose_latency_limit(struct device *dev, s32 value);
-void dev_pm_qos_hide_latency_limit(struct device *dev);
-#else
-static inline int dev_pm_qos_expose_latency_limit(struct device *dev, s32 value)
-			{ return 0; }
-static inline void dev_pm_qos_hide_latency_limit(struct device *dev) {}
-#endif
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/pm_runtime.h b/ANDROID_3.4.5/include/linux/pm_runtime.h
deleted file mode 100644
index f271860c..00000000
--- a/ANDROID_3.4.5/include/linux/pm_runtime.h
+++ /dev/null
@@ -1,251 +0,0 @@
-/*
- * pm_runtime.h - Device run-time power management helper functions.
- *
- * Copyright (C) 2009 Rafael J. Wysocki <rjw@sisk.pl>
- *
- * This file is released under the GPLv2.
- */
-
-#ifndef _LINUX_PM_RUNTIME_H
-#define _LINUX_PM_RUNTIME_H
-
-#include <linux/device.h>
-#include <linux/notifier.h>
-#include <linux/pm.h>
-
-#include <linux/jiffies.h>
-
-/* Runtime PM flag argument bits */
-#define RPM_ASYNC		0x01	/* Request is asynchronous */
-#define RPM_NOWAIT		0x02	/* Don't wait for concurrent
-					    state change */
-#define RPM_GET_PUT		0x04	/* Increment/decrement the
-					    usage_count */
-#define RPM_AUTO		0x08	/* Use autosuspend_delay */
-
-#ifdef CONFIG_PM_RUNTIME
-
-extern struct workqueue_struct *pm_wq;
-
-extern int __pm_runtime_idle(struct device *dev, int rpmflags);
-extern int __pm_runtime_suspend(struct device *dev, int rpmflags);
-extern int __pm_runtime_resume(struct device *dev, int rpmflags);
-extern int pm_schedule_suspend(struct device *dev, unsigned int delay);
-extern int __pm_runtime_set_status(struct device *dev, unsigned int status);
-extern int pm_runtime_barrier(struct device *dev);
-extern void pm_runtime_enable(struct device *dev);
-extern void __pm_runtime_disable(struct device *dev, bool check_resume);
-extern void pm_runtime_allow(struct device *dev);
-extern void pm_runtime_forbid(struct device *dev);
-extern int pm_generic_runtime_idle(struct device *dev);
-extern int pm_generic_runtime_suspend(struct device *dev);
-extern int pm_generic_runtime_resume(struct device *dev);
-extern void pm_runtime_no_callbacks(struct device *dev);
-extern void pm_runtime_irq_safe(struct device *dev);
-extern void __pm_runtime_use_autosuspend(struct device *dev, bool use);
-extern void pm_runtime_set_autosuspend_delay(struct device *dev, int delay);
-extern unsigned long pm_runtime_autosuspend_expiration(struct device *dev);
-extern void pm_runtime_update_max_time_suspended(struct device *dev,
-						 s64 delta_ns);
-
-static inline bool pm_children_suspended(struct device *dev)
-{
-	return dev->power.ignore_children
-		|| !atomic_read(&dev->power.child_count);
-}
-
-static inline void pm_runtime_get_noresume(struct device *dev)
-{
-	atomic_inc(&dev->power.usage_count);
-}
-
-static inline void pm_runtime_put_noidle(struct device *dev)
-{
-	atomic_add_unless(&dev->power.usage_count, -1, 0);
-}
-
-static inline bool device_run_wake(struct device *dev)
-{
-	return dev->power.run_wake;
-}
-
-static inline void device_set_run_wake(struct device *dev, bool enable)
-{
-	dev->power.run_wake = enable;
-}
-
-static inline bool pm_runtime_suspended(struct device *dev)
-{
-	return dev->power.runtime_status == RPM_SUSPENDED
-		&& !dev->power.disable_depth;
-}
-
-static inline bool pm_runtime_status_suspended(struct device *dev)
-{
-	return dev->power.runtime_status == RPM_SUSPENDED;
-}
-
-static inline bool pm_runtime_enabled(struct device *dev)
-{
-	return !dev->power.disable_depth;
-}
-
-static inline bool pm_runtime_callbacks_present(struct device *dev)
-{
-	return !dev->power.no_callbacks;
-}
-
-static inline void pm_runtime_mark_last_busy(struct device *dev)
-{
-	ACCESS_ONCE(dev->power.last_busy) = jiffies;
-}
-
-#else /* !CONFIG_PM_RUNTIME */
-
-static inline int __pm_runtime_idle(struct device *dev, int rpmflags)
-{
-	return -ENOSYS;
-}
-static inline int __pm_runtime_suspend(struct device *dev, int rpmflags)
-{
-	return -ENOSYS;
-}
-static inline int __pm_runtime_resume(struct device *dev, int rpmflags)
-{
-	return 1;
-}
-static inline int pm_schedule_suspend(struct device *dev, unsigned int delay)
-{
-	return -ENOSYS;
-}
-static inline int __pm_runtime_set_status(struct device *dev,
-					    unsigned int status) { return 0; }
-static inline int pm_runtime_barrier(struct device *dev) { return 0; }
-static inline void pm_runtime_enable(struct device *dev) {}
-static inline void __pm_runtime_disable(struct device *dev, bool c) {}
-static inline void pm_runtime_allow(struct device *dev) {}
-static inline void pm_runtime_forbid(struct device *dev) {}
-
-static inline bool pm_children_suspended(struct device *dev) { return false; }
-static inline void pm_runtime_get_noresume(struct device *dev) {}
-static inline void pm_runtime_put_noidle(struct device *dev) {}
-static inline bool device_run_wake(struct device *dev) { return false; }
-static inline void device_set_run_wake(struct device *dev, bool enable) {}
-static inline bool pm_runtime_suspended(struct device *dev) { return false; }
-static inline bool pm_runtime_status_suspended(struct device *dev) { return false; }
-static inline bool pm_runtime_enabled(struct device *dev) { return false; }
-
-static inline int pm_generic_runtime_idle(struct device *dev) { return 0; }
-static inline int pm_generic_runtime_suspend(struct device *dev) { return 0; }
-static inline int pm_generic_runtime_resume(struct device *dev) { return 0; }
-static inline void pm_runtime_no_callbacks(struct device *dev) {}
-static inline void pm_runtime_irq_safe(struct device *dev) {}
-
-static inline bool pm_runtime_callbacks_present(struct device *dev) { return false; }
-static inline void pm_runtime_mark_last_busy(struct device *dev) {}
-static inline void __pm_runtime_use_autosuspend(struct device *dev,
-						bool use) {}
-static inline void pm_runtime_set_autosuspend_delay(struct device *dev,
-						int delay) {}
-static inline unsigned long pm_runtime_autosuspend_expiration(
-				struct device *dev) { return 0; }
-
-#endif /* !CONFIG_PM_RUNTIME */
-
-static inline int pm_runtime_idle(struct device *dev)
-{
-	return __pm_runtime_idle(dev, 0);
-}
-
-static inline int pm_runtime_suspend(struct device *dev)
-{
-	return __pm_runtime_suspend(dev, 0);
-}
-
-static inline int pm_runtime_autosuspend(struct device *dev)
-{
-	return __pm_runtime_suspend(dev, RPM_AUTO);
-}
-
-static inline int pm_runtime_resume(struct device *dev)
-{
-	return __pm_runtime_resume(dev, 0);
-}
-
-static inline int pm_request_idle(struct device *dev)
-{
-	return __pm_runtime_idle(dev, RPM_ASYNC);
-}
-
-static inline int pm_request_resume(struct device *dev)
-{
-	return __pm_runtime_resume(dev, RPM_ASYNC);
-}
-
-static inline int pm_request_autosuspend(struct device *dev)
-{
-	return __pm_runtime_suspend(dev, RPM_ASYNC | RPM_AUTO);
-}
-
-static inline int pm_runtime_get(struct device *dev)
-{
-	return __pm_runtime_resume(dev, RPM_GET_PUT | RPM_ASYNC);
-}
-
-static inline int pm_runtime_get_sync(struct device *dev)
-{
-	return __pm_runtime_resume(dev, RPM_GET_PUT);
-}
-
-static inline int pm_runtime_put(struct device *dev)
-{
-	return __pm_runtime_idle(dev, RPM_GET_PUT | RPM_ASYNC);
-}
-
-static inline int pm_runtime_put_autosuspend(struct device *dev)
-{
-	return __pm_runtime_suspend(dev,
-	    RPM_GET_PUT | RPM_ASYNC | RPM_AUTO);
-}
-
-static inline int pm_runtime_put_sync(struct device *dev)
-{
-	return __pm_runtime_idle(dev, RPM_GET_PUT);
-}
-
-static inline int pm_runtime_put_sync_suspend(struct device *dev)
-{
-	return __pm_runtime_suspend(dev, RPM_GET_PUT);
-}
-
-static inline int pm_runtime_put_sync_autosuspend(struct device *dev)
-{
-	return __pm_runtime_suspend(dev, RPM_GET_PUT | RPM_AUTO);
-}
-
-static inline int pm_runtime_set_active(struct device *dev)
-{
-	return __pm_runtime_set_status(dev, RPM_ACTIVE);
-}
-
-static inline void pm_runtime_set_suspended(struct device *dev)
-{
-	__pm_runtime_set_status(dev, RPM_SUSPENDED);
-}
-
-static inline void pm_runtime_disable(struct device *dev)
-{
-	__pm_runtime_disable(dev, true);
-}
-
-static inline void pm_runtime_use_autosuspend(struct device *dev)
-{
-	__pm_runtime_use_autosuspend(dev, true);
-}
-
-static inline void pm_runtime_dont_use_autosuspend(struct device *dev)
-{
-	__pm_runtime_use_autosuspend(dev, false);
-}
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/pm_wakeup.h b/ANDROID_3.4.5/include/linux/pm_wakeup.h
deleted file mode 100644
index 569781fa..00000000
--- a/ANDROID_3.4.5/include/linux/pm_wakeup.h
+++ /dev/null
@@ -1,195 +0,0 @@
-/*
- *  pm_wakeup.h - Power management wakeup interface
- *
- *  Copyright (C) 2008 Alan Stern
- *  Copyright (C) 2010 Rafael J. Wysocki, Novell Inc.
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef _LINUX_PM_WAKEUP_H
-#define _LINUX_PM_WAKEUP_H
-
-#ifndef _DEVICE_H_
-# error "please don't include this file directly"
-#endif
-
-#include <linux/types.h>
-
-/**
- * struct wakeup_source - Representation of wakeup sources
- *
- * @total_time: Total time this wakeup source has been active.
- * @max_time: Maximum time this wakeup source has been continuously active.
- * @last_time: Monotonic clock when the wakeup source's was touched last time.
- * @prevent_sleep_time: Total time this source has been preventing autosleep.
- * @event_count: Number of signaled wakeup events.
- * @active_count: Number of times the wakeup sorce was activated.
- * @relax_count: Number of times the wakeup sorce was deactivated.
- * @expire_count: Number of times the wakeup source's timeout has expired.
- * @wakeup_count: Number of times the wakeup source might abort suspend.
- * @active: Status of the wakeup source.
- * @has_timeout: The wakeup source has been activated with a timeout.
- */
-struct wakeup_source {
-	const char 		*name;
-	struct list_head	entry;
-	spinlock_t		lock;
-	struct timer_list	timer;
-	unsigned long		timer_expires;
-	ktime_t total_time;
-	ktime_t max_time;
-	ktime_t last_time;
-	ktime_t start_prevent_time;
-	ktime_t prevent_sleep_time;
-	unsigned long		event_count;
-	unsigned long		active_count;
-	unsigned long		relax_count;
-	unsigned long		expire_count;
-	unsigned long		wakeup_count;
-	bool			active:1;
-	bool			autosleep_enabled:1;
-};
-
-#ifdef CONFIG_PM_SLEEP
-
-/*
- * Changes to device_may_wakeup take effect on the next pm state change.
- */
-
-static inline bool device_can_wakeup(struct device *dev)
-{
-	return dev->power.can_wakeup;
-}
-
-static inline bool device_may_wakeup(struct device *dev)
-{
-	return dev->power.can_wakeup && !!dev->power.wakeup;
-}
-
-/* drivers/base/power/wakeup.c */
-extern void wakeup_source_prepare(struct wakeup_source *ws, const char *name);
-extern struct wakeup_source *wakeup_source_create(const char *name);
-extern void wakeup_source_drop(struct wakeup_source *ws);
-extern void wakeup_source_destroy(struct wakeup_source *ws);
-extern void wakeup_source_add(struct wakeup_source *ws);
-extern void wakeup_source_remove(struct wakeup_source *ws);
-extern struct wakeup_source *wakeup_source_register(const char *name);
-extern void wakeup_source_unregister(struct wakeup_source *ws);
-extern int device_wakeup_enable(struct device *dev);
-extern int device_wakeup_disable(struct device *dev);
-extern void device_set_wakeup_capable(struct device *dev, bool capable);
-extern int device_init_wakeup(struct device *dev, bool val);
-extern int device_set_wakeup_enable(struct device *dev, bool enable);
-extern void __pm_stay_awake(struct wakeup_source *ws);
-extern void pm_stay_awake(struct device *dev);
-extern void __pm_relax(struct wakeup_source *ws);
-extern void pm_relax(struct device *dev);
-extern void __pm_wakeup_event(struct wakeup_source *ws, unsigned int msec);
-extern void pm_wakeup_event(struct device *dev, unsigned int msec);
-
-#else /* !CONFIG_PM_SLEEP */
-
-static inline void device_set_wakeup_capable(struct device *dev, bool capable)
-{
-	dev->power.can_wakeup = capable;
-}
-
-static inline bool device_can_wakeup(struct device *dev)
-{
-	return dev->power.can_wakeup;
-}
-
-static inline void wakeup_source_prepare(struct wakeup_source *ws,
-					 const char *name) {}
-
-static inline struct wakeup_source *wakeup_source_create(const char *name)
-{
-	return NULL;
-}
-
-static inline void wakeup_source_drop(struct wakeup_source *ws) {}
-
-static inline void wakeup_source_destroy(struct wakeup_source *ws) {}
-
-static inline void wakeup_source_add(struct wakeup_source *ws) {}
-
-static inline void wakeup_source_remove(struct wakeup_source *ws) {}
-
-static inline struct wakeup_source *wakeup_source_register(const char *name)
-{
-	return NULL;
-}
-
-static inline void wakeup_source_unregister(struct wakeup_source *ws) {}
-
-static inline int device_wakeup_enable(struct device *dev)
-{
-	dev->power.should_wakeup = true;
-	return 0;
-}
-
-static inline int device_wakeup_disable(struct device *dev)
-{
-	dev->power.should_wakeup = false;
-	return 0;
-}
-
-static inline int device_set_wakeup_enable(struct device *dev, bool enable)
-{
-	dev->power.should_wakeup = enable;
-	return 0;
-}
-
-static inline int device_init_wakeup(struct device *dev, bool val)
-{
-	device_set_wakeup_capable(dev, val);
-	device_set_wakeup_enable(dev, val);
-	return 0;
-}
-
-static inline bool device_may_wakeup(struct device *dev)
-{
-	return dev->power.can_wakeup && dev->power.should_wakeup;
-}
-
-static inline void __pm_stay_awake(struct wakeup_source *ws) {}
-
-static inline void pm_stay_awake(struct device *dev) {}
-
-static inline void __pm_relax(struct wakeup_source *ws) {}
-
-static inline void pm_relax(struct device *dev) {}
-
-static inline void __pm_wakeup_event(struct wakeup_source *ws, unsigned int msec) {}
-
-static inline void pm_wakeup_event(struct device *dev, unsigned int msec) {}
-
-#endif /* !CONFIG_PM_SLEEP */
-
-static inline void wakeup_source_init(struct wakeup_source *ws,
-				      const char *name)
-{
-	wakeup_source_prepare(ws, name);
-	wakeup_source_add(ws);
-}
-
-static inline void wakeup_source_trash(struct wakeup_source *ws)
-{
-	wakeup_source_remove(ws);
-	wakeup_source_drop(ws);
-}
-
-#endif /* _LINUX_PM_WAKEUP_H */
diff --git a/ANDROID_3.4.5/include/linux/pmu.h b/ANDROID_3.4.5/include/linux/pmu.h
deleted file mode 100644
index 84e6a55a..00000000
--- a/ANDROID_3.4.5/include/linux/pmu.h
+++ /dev/null
@@ -1,213 +0,0 @@
-/*
- * Definitions for talking to the PMU.  The PMU is a microcontroller
- * which controls battery charging and system power on PowerBook 3400
- * and 2400 models as well as the RTC and various other things.
- *
- * Copyright (C) 1998 Paul Mackerras.
- */
-
-#ifndef _LINUX_PMU_H
-#define _LINUX_PMU_H
-
-#define PMU_DRIVER_VERSION	2
-
-/*
- * PMU commands
- */
-#define PMU_POWER_CTRL0		0x10	/* control power of some devices */
-#define PMU_POWER_CTRL		0x11	/* control power of some devices */
-#define PMU_ADB_CMD		0x20	/* send ADB packet */
-#define PMU_ADB_POLL_OFF	0x21	/* disable ADB auto-poll */
-#define PMU_WRITE_NVRAM		0x33	/* write non-volatile RAM */
-#define PMU_READ_NVRAM		0x3b	/* read non-volatile RAM */
-#define PMU_SET_RTC		0x30	/* set real-time clock */
-#define PMU_READ_RTC		0x38	/* read real-time clock */
-#define PMU_SET_VOLBUTTON	0x40	/* set volume up/down position */
-#define PMU_BACKLIGHT_BRIGHT	0x41	/* set backlight brightness */
-#define PMU_GET_VOLBUTTON	0x48	/* get volume up/down position */
-#define PMU_PCEJECT		0x4c	/* eject PC-card from slot */
-#define PMU_BATTERY_STATE	0x6b	/* report battery state etc. */
-#define PMU_SMART_BATTERY_STATE	0x6f	/* report battery state (new way) */
-#define PMU_SET_INTR_MASK	0x70	/* set PMU interrupt mask */
-#define PMU_INT_ACK		0x78	/* read interrupt bits */
-#define PMU_SHUTDOWN		0x7e	/* turn power off */
-#define PMU_CPU_SPEED		0x7d	/* control CPU speed on some models */
-#define PMU_SLEEP		0x7f	/* put CPU to sleep */
-#define PMU_POWER_EVENTS	0x8f	/* Send power-event commands to PMU */
-#define PMU_I2C_CMD		0x9a	/* I2C operations */
-#define PMU_RESET		0xd0	/* reset CPU */
-#define PMU_GET_BRIGHTBUTTON	0xd9	/* report brightness up/down pos */
-#define PMU_GET_COVER		0xdc	/* report cover open/closed */
-#define PMU_SYSTEM_READY	0xdf	/* tell PMU we are awake */
-#define PMU_GET_VERSION		0xea	/* read the PMU version */
-
-/* Bits to use with the PMU_POWER_CTRL0 command */
-#define PMU_POW0_ON		0x80	/* OR this to power ON the device */
-#define PMU_POW0_OFF		0x00	/* leave bit 7 to 0 to power it OFF */
-#define PMU_POW0_HARD_DRIVE	0x04	/* Hard drive power (on wallstreet/lombard ?) */
-
-/* Bits to use with the PMU_POWER_CTRL command */
-#define PMU_POW_ON		0x80	/* OR this to power ON the device */
-#define PMU_POW_OFF		0x00	/* leave bit 7 to 0 to power it OFF */
-#define PMU_POW_BACKLIGHT	0x01	/* backlight power */
-#define PMU_POW_CHARGER		0x02	/* battery charger power */
-#define PMU_POW_IRLED		0x04	/* IR led power (on wallstreet) */
-#define PMU_POW_MEDIABAY	0x08	/* media bay power (wallstreet/lombard ?) */
-
-/* Bits in PMU interrupt and interrupt mask bytes */
-#define PMU_INT_PCEJECT		0x04	/* PC-card eject buttons */
-#define PMU_INT_SNDBRT		0x08	/* sound/brightness up/down buttons */
-#define PMU_INT_ADB		0x10	/* ADB autopoll or reply data */
-#define PMU_INT_BATTERY		0x20	/* Battery state change */
-#define PMU_INT_ENVIRONMENT	0x40	/* Environment interrupts */
-#define PMU_INT_TICK		0x80	/* 1-second tick interrupt */
-
-/* Other bits in PMU interrupt valid when PMU_INT_ADB is set */
-#define PMU_INT_ADB_AUTO	0x04	/* ADB autopoll, when PMU_INT_ADB */
-#define PMU_INT_WAITING_CHARGER	0x01	/* ??? */
-#define PMU_INT_AUTO_SRQ_POLL	0x02	/* ??? */
-
-/* Bits in the environement message (either obtained via PMU_GET_COVER,
- * or via PMU_INT_ENVIRONMENT on core99 */
-#define PMU_ENV_LID_CLOSED	0x01	/* The lid is closed */
-
-/* I2C related definitions */
-#define PMU_I2C_MODE_SIMPLE	0
-#define PMU_I2C_MODE_STDSUB	1
-#define PMU_I2C_MODE_COMBINED	2
-
-#define PMU_I2C_BUS_STATUS	0
-#define PMU_I2C_BUS_SYSCLK	1
-#define PMU_I2C_BUS_POWER	2
-
-#define PMU_I2C_STATUS_OK	0
-#define PMU_I2C_STATUS_DATAREAD	1
-#define PMU_I2C_STATUS_BUSY	0xfe
-
-
-/* Kind of PMU (model) */
-enum {
-	PMU_UNKNOWN,
-	PMU_OHARE_BASED,	/* 2400, 3400, 3500 (old G3 powerbook) */
-	PMU_HEATHROW_BASED,	/* PowerBook G3 series */
-	PMU_PADDINGTON_BASED,	/* 1999 PowerBook G3 */
-	PMU_KEYLARGO_BASED,	/* Core99 motherboard (PMU99) */
-	PMU_68K_V1,		/* 68K PMU, version 1 */
-	PMU_68K_V2, 		/* 68K PMU, version 2 */
-};
-
-/* PMU PMU_POWER_EVENTS commands */
-enum {
-	PMU_PWR_GET_POWERUP_EVENTS	= 0x00,
-	PMU_PWR_SET_POWERUP_EVENTS	= 0x01,
-	PMU_PWR_CLR_POWERUP_EVENTS	= 0x02,
-	PMU_PWR_GET_WAKEUP_EVENTS	= 0x03,
-	PMU_PWR_SET_WAKEUP_EVENTS	= 0x04,
-	PMU_PWR_CLR_WAKEUP_EVENTS	= 0x05,
-};
-
-/* Power events wakeup bits */
-enum {
-	PMU_PWR_WAKEUP_KEY		= 0x01,	/* Wake on key press */
-	PMU_PWR_WAKEUP_AC_INSERT	= 0x02, /* Wake on AC adapter plug */
-	PMU_PWR_WAKEUP_AC_CHANGE	= 0x04,
-	PMU_PWR_WAKEUP_LID_OPEN		= 0x08,
-	PMU_PWR_WAKEUP_RING		= 0x10,
-};
-	
-/*
- * Ioctl commands for the /dev/pmu device
- */
-#include <linux/ioctl.h>
-
-/* no param */
-#define PMU_IOC_SLEEP		_IO('B', 0)
-/* out param: u32*	backlight value: 0 to 15 */
-#define PMU_IOC_GET_BACKLIGHT	_IOR('B', 1, size_t)
-/* in param: u32	backlight value: 0 to 15 */
-#define PMU_IOC_SET_BACKLIGHT	_IOW('B', 2, size_t)
-/* out param: u32*	PMU model */
-#define PMU_IOC_GET_MODEL	_IOR('B', 3, size_t)
-/* out param: u32*	has_adb: 0 or 1 */
-#define PMU_IOC_HAS_ADB		_IOR('B', 4, size_t) 
-/* out param: u32*	can_sleep: 0 or 1 */
-#define PMU_IOC_CAN_SLEEP	_IOR('B', 5, size_t) 
-/* no param, but historically was _IOR('B', 6, 0), meaning 4 bytes */
-#define PMU_IOC_GRAB_BACKLIGHT	_IOR('B', 6, size_t) 
-
-#ifdef __KERNEL__
-
-extern int find_via_pmu(void);
-
-extern int pmu_request(struct adb_request *req,
-		void (*done)(struct adb_request *), int nbytes, ...);
-extern int pmu_queue_request(struct adb_request *req);
-extern void pmu_poll(void);
-extern void pmu_poll_adb(void); /* For use by xmon */
-extern void pmu_wait_complete(struct adb_request *req);
-
-/* For use before switching interrupts off for a long time;
- * warning: not stackable
- */
-#if defined(CONFIG_ADB_PMU)
-extern void pmu_suspend(void);
-extern void pmu_resume(void);
-#else
-static inline void pmu_suspend(void)
-{}
-static inline void pmu_resume(void)
-{}
-#endif
-
-extern void pmu_enable_irled(int on);
-
-extern void pmu_restart(void);
-extern void pmu_shutdown(void);
-extern void pmu_unlock(void);
-
-extern int pmu_present(void);
-extern int pmu_get_model(void);
-
-extern void pmu_backlight_set_sleep(int sleep);
-
-#define PMU_MAX_BATTERIES	2
-
-/* values for pmu_power_flags */
-#define PMU_PWR_AC_PRESENT	0x00000001
-
-/* values for pmu_battery_info.flags */
-#define PMU_BATT_PRESENT	0x00000001
-#define PMU_BATT_CHARGING	0x00000002
-#define PMU_BATT_TYPE_MASK	0x000000f0
-#define PMU_BATT_TYPE_SMART	0x00000010 /* Smart battery */
-#define PMU_BATT_TYPE_HOOPER	0x00000020 /* 3400/3500 */
-#define PMU_BATT_TYPE_COMET	0x00000030 /* 2400 */
-
-struct pmu_battery_info
-{
-	unsigned int	flags;
-	unsigned int	charge;		/* current charge */
-	unsigned int	max_charge;	/* maximum charge */
-	signed int	amperage;	/* current, positive if charging */
-	unsigned int	voltage;	/* voltage */
-	unsigned int	time_remaining;	/* remaining time */
-};
-
-extern int pmu_battery_count;
-extern struct pmu_battery_info pmu_batteries[PMU_MAX_BATTERIES];
-extern unsigned int pmu_power_flags;
-
-/* Backlight */
-extern void pmu_backlight_init(void);
-
-/* some code needs to know if the PMU was suspended for hibernation */
-#if defined(CONFIG_SUSPEND) && defined(CONFIG_PPC32)
-extern int pmu_sys_suspended;
-#else
-/* if power management is not configured it can't be suspended */
-#define pmu_sys_suspended	0
-#endif
-
-#endif	/* __KERNEL__ */
-
-#endif /* _LINUX_PMU_H */
diff --git a/ANDROID_3.4.5/include/linux/pnfs_osd_xdr.h b/ANDROID_3.4.5/include/linux/pnfs_osd_xdr.h
deleted file mode 100644
index 435dd5fa..00000000
--- a/ANDROID_3.4.5/include/linux/pnfs_osd_xdr.h
+++ /dev/null
@@ -1,318 +0,0 @@
-/*
- *  pNFS-osd on-the-wire data structures
- *
- *  Copyright (C) 2007 Panasas Inc. [year of first publication]
- *  All rights reserved.
- *
- *  Benny Halevy <bhalevy@panasas.com>
- *  Boaz Harrosh <bharrosh@panasas.com>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2
- *  See the file COPYING included with this distribution for more details.
- *
- *  Redistribution and use in source and binary forms, with or without
- *  modification, are permitted provided that the following conditions
- *  are met:
- *
- *  1. Redistributions of source code must retain the above copyright
- *     notice, this list of conditions and the following disclaimer.
- *  2. Redistributions in binary form must reproduce the above copyright
- *     notice, this list of conditions and the following disclaimer in the
- *     documentation and/or other materials provided with the distribution.
- *  3. Neither the name of the Panasas company nor the names of its
- *     contributors may be used to endorse or promote products derived
- *     from this software without specific prior written permission.
- *
- *  THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- *  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- *  DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- *  FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- *  CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- *  SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
- *  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
- *  LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
- *  NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- *  SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-#ifndef __PNFS_OSD_XDR_H__
-#define __PNFS_OSD_XDR_H__
-
-#include <linux/nfs_fs.h>
-#include <linux/nfs_page.h>
-
-/*
- * draft-ietf-nfsv4-minorversion-22
- * draft-ietf-nfsv4-pnfs-obj-12
- */
-
-/* Layout Structure */
-
-enum pnfs_osd_raid_algorithm4 {
-	PNFS_OSD_RAID_0		= 1,
-	PNFS_OSD_RAID_4		= 2,
-	PNFS_OSD_RAID_5		= 3,
-	PNFS_OSD_RAID_PQ	= 4     /* Reed-Solomon P+Q */
-};
-
-/*   struct pnfs_osd_data_map4 {
- *       uint32_t                    odm_num_comps;
- *       length4                     odm_stripe_unit;
- *       uint32_t                    odm_group_width;
- *       uint32_t                    odm_group_depth;
- *       uint32_t                    odm_mirror_cnt;
- *       pnfs_osd_raid_algorithm4    odm_raid_algorithm;
- *   };
- */
-struct pnfs_osd_data_map {
-	u32	odm_num_comps;
-	u64	odm_stripe_unit;
-	u32	odm_group_width;
-	u32	odm_group_depth;
-	u32	odm_mirror_cnt;
-	u32	odm_raid_algorithm;
-};
-
-/*   struct pnfs_osd_objid4 {
- *       deviceid4       oid_device_id;
- *       uint64_t        oid_partition_id;
- *       uint64_t        oid_object_id;
- *   };
- */
-struct pnfs_osd_objid {
-	struct nfs4_deviceid	oid_device_id;
-	u64			oid_partition_id;
-	u64			oid_object_id;
-};
-
-/* For printout. I use:
- * kprint("dev(%llx:%llx)", _DEVID_LO(pointer), _DEVID_HI(pointer));
- * BE style
- */
-#define _DEVID_LO(oid_device_id) \
-	(unsigned long long)be64_to_cpup((__be64 *)(oid_device_id)->data)
-
-#define _DEVID_HI(oid_device_id) \
-	(unsigned long long)be64_to_cpup(((__be64 *)(oid_device_id)->data) + 1)
-
-enum pnfs_osd_version {
-	PNFS_OSD_MISSING              = 0,
-	PNFS_OSD_VERSION_1            = 1,
-	PNFS_OSD_VERSION_2            = 2
-};
-
-struct pnfs_osd_opaque_cred {
-	u32 cred_len;
-	void *cred;
-};
-
-enum pnfs_osd_cap_key_sec {
-	PNFS_OSD_CAP_KEY_SEC_NONE     = 0,
-	PNFS_OSD_CAP_KEY_SEC_SSV      = 1,
-};
-
-/*   struct pnfs_osd_object_cred4 {
- *       pnfs_osd_objid4         oc_object_id;
- *       pnfs_osd_version4       oc_osd_version;
- *       pnfs_osd_cap_key_sec4   oc_cap_key_sec;
- *       opaque                  oc_capability_key<>;
- *       opaque                  oc_capability<>;
- *   };
- */
-struct pnfs_osd_object_cred {
-	struct pnfs_osd_objid		oc_object_id;
-	u32				oc_osd_version;
-	u32				oc_cap_key_sec;
-	struct pnfs_osd_opaque_cred	oc_cap_key;
-	struct pnfs_osd_opaque_cred	oc_cap;
-};
-
-/*   struct pnfs_osd_layout4 {
- *       pnfs_osd_data_map4      olo_map;
- *       uint32_t                olo_comps_index;
- *       pnfs_osd_object_cred4   olo_components<>;
- *   };
- */
-struct pnfs_osd_layout {
-	struct pnfs_osd_data_map	olo_map;
-	u32				olo_comps_index;
-	u32				olo_num_comps;
-	struct pnfs_osd_object_cred	*olo_comps;
-};
-
-/* Device Address */
-enum pnfs_osd_targetid_type {
-	OBJ_TARGET_ANON = 1,
-	OBJ_TARGET_SCSI_NAME = 2,
-	OBJ_TARGET_SCSI_DEVICE_ID = 3,
-};
-
-/*   union pnfs_osd_targetid4 switch (pnfs_osd_targetid_type4 oti_type) {
- *       case OBJ_TARGET_SCSI_NAME:
- *           string              oti_scsi_name<>;
- *
- *       case OBJ_TARGET_SCSI_DEVICE_ID:
- *           opaque              oti_scsi_device_id<>;
- *
- *       default:
- *           void;
- *   };
- *
- *   union pnfs_osd_targetaddr4 switch (bool ota_available) {
- *       case TRUE:
- *           netaddr4            ota_netaddr;
- *       case FALSE:
- *           void;
- *   };
- *
- *   struct pnfs_osd_deviceaddr4 {
- *       pnfs_osd_targetid4      oda_targetid;
- *       pnfs_osd_targetaddr4    oda_targetaddr;
- *       uint64_t                oda_lun;
- *       opaque                  oda_systemid<>;
- *       pnfs_osd_object_cred4   oda_root_obj_cred;
- *       opaque                  oda_osdname<>;
- *   };
- */
-struct pnfs_osd_targetid {
-	u32				oti_type;
-	struct nfs4_string		oti_scsi_device_id;
-};
-
-/*   struct netaddr4 {
- *       // see struct rpcb in RFC1833
- *       string r_netid<>;    // network id
- *       string r_addr<>;     // universal address
- *   };
- */
-struct pnfs_osd_net_addr {
-	struct nfs4_string	r_netid;
-	struct nfs4_string	r_addr;
-};
-
-struct pnfs_osd_targetaddr {
-	u32				ota_available;
-	struct pnfs_osd_net_addr	ota_netaddr;
-};
-
-struct pnfs_osd_deviceaddr {
-	struct pnfs_osd_targetid	oda_targetid;
-	struct pnfs_osd_targetaddr	oda_targetaddr;
-	u8				oda_lun[8];
-	struct nfs4_string		oda_systemid;
-	struct pnfs_osd_object_cred	oda_root_obj_cred;
-	struct nfs4_string		oda_osdname;
-};
-
-/* LAYOUTCOMMIT: layoutupdate */
-
-/*   union pnfs_osd_deltaspaceused4 switch (bool dsu_valid) {
- *       case TRUE:
- *           int64_t     dsu_delta;
- *       case FALSE:
- *           void;
- *   };
- *
- *   struct pnfs_osd_layoutupdate4 {
- *       pnfs_osd_deltaspaceused4    olu_delta_space_used;
- *       bool                        olu_ioerr_flag;
- *   };
- */
-struct pnfs_osd_layoutupdate {
-	u32	dsu_valid;
-	s64	dsu_delta;
-	u32	olu_ioerr_flag;
-};
-
-/* LAYOUTRETURN: I/O Rrror Report */
-
-enum pnfs_osd_errno {
-	PNFS_OSD_ERR_EIO		= 1,
-	PNFS_OSD_ERR_NOT_FOUND		= 2,
-	PNFS_OSD_ERR_NO_SPACE		= 3,
-	PNFS_OSD_ERR_BAD_CRED		= 4,
-	PNFS_OSD_ERR_NO_ACCESS		= 5,
-	PNFS_OSD_ERR_UNREACHABLE	= 6,
-	PNFS_OSD_ERR_RESOURCE		= 7
-};
-
-/*   struct pnfs_osd_ioerr4 {
- *       pnfs_osd_objid4     oer_component;
- *       length4             oer_comp_offset;
- *       length4             oer_comp_length;
- *       bool                oer_iswrite;
- *       pnfs_osd_errno4     oer_errno;
- *   };
- */
-struct pnfs_osd_ioerr {
-	struct pnfs_osd_objid	oer_component;
-	u64			oer_comp_offset;
-	u64			oer_comp_length;
-	u32			oer_iswrite;
-	u32			oer_errno;
-};
-
-/* OSD XDR Client API */
-/* Layout helpers */
-/* Layout decoding is done in two parts:
- * 1. First Call pnfs_osd_xdr_decode_layout_map to read in only the header part
- *    of the layout. @iter members need not be initialized.
- *    Returned:
- *             @layout members are set. (@layout->olo_comps set to NULL).
- *
- *             Zero on success, or negative error if passed xdr is broken.
- *
- * 2. 2nd Call pnfs_osd_xdr_decode_layout_comp() in a loop until it returns
- *    false, to decode the next component.
- *    Returned:
- *       true if there is more to decode or false if we are done or error.
- *
- * Example:
- *	struct pnfs_osd_xdr_decode_layout_iter iter;
- *	struct pnfs_osd_layout layout;
- *	struct pnfs_osd_object_cred comp;
- *	int status;
- *
- *	status = pnfs_osd_xdr_decode_layout_map(&layout, &iter, xdr);
- *	if (unlikely(status))
- *		goto err;
- *	while(pnfs_osd_xdr_decode_layout_comp(&comp, &iter, xdr, &status)) {
- *		// All of @comp strings point to inside the xdr_buffer
- *		// or scrach buffer. Copy them out to user memory eg.
- *		copy_single_comp(dest_comp++, &comp);
- *	}
- *	if (unlikely(status))
- *		goto err;
- */
-
-struct pnfs_osd_xdr_decode_layout_iter {
-	unsigned total_comps;
-	unsigned decoded_comps;
-};
-
-extern int pnfs_osd_xdr_decode_layout_map(struct pnfs_osd_layout *layout,
-	struct pnfs_osd_xdr_decode_layout_iter *iter, struct xdr_stream *xdr);
-
-extern bool pnfs_osd_xdr_decode_layout_comp(struct pnfs_osd_object_cred *comp,
-	struct pnfs_osd_xdr_decode_layout_iter *iter, struct xdr_stream *xdr,
-	int *err);
-
-/* Device Info helpers */
-
-/* Note: All strings inside @deviceaddr point to space inside @p.
- * @p should stay valid while @deviceaddr is in use.
- */
-extern void pnfs_osd_xdr_decode_deviceaddr(
-	struct pnfs_osd_deviceaddr *deviceaddr, __be32 *p);
-
-/* layoutupdate (layout_commit) xdr helpers */
-extern int
-pnfs_osd_xdr_encode_layoutupdate(struct xdr_stream *xdr,
-				 struct pnfs_osd_layoutupdate *lou);
-
-/* osd_ioerror encoding (layout_return) */
-extern __be32 *pnfs_osd_xdr_ioerr_reserve_space(struct xdr_stream *xdr);
-extern void pnfs_osd_xdr_encode_ioerr(__be32 *p, struct pnfs_osd_ioerr *ioerr);
-
-#endif /* __PNFS_OSD_XDR_H__ */
diff --git a/ANDROID_3.4.5/include/linux/pnp.h b/ANDROID_3.4.5/include/linux/pnp.h
deleted file mode 100644
index 195aafc6..00000000
--- a/ANDROID_3.4.5/include/linux/pnp.h
+++ /dev/null
@@ -1,505 +0,0 @@
-/*
- * Linux Plug and Play Support
- * Copyright by Adam Belay <ambx1@neo.rr.com>
- * Copyright (C) 2008 Hewlett-Packard Development Company, L.P.
- *	Bjorn Helgaas <bjorn.helgaas@hp.com>
- */
-
-#ifndef _LINUX_PNP_H
-#define _LINUX_PNP_H
-
-#include <linux/device.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/mod_devicetable.h>
-
-#define PNP_NAME_LEN		50
-
-struct pnp_protocol;
-struct pnp_dev;
-
-/*
- * Resource Management
- */
-#ifdef CONFIG_PNP
-struct resource *pnp_get_resource(struct pnp_dev *dev, unsigned long type,
-				unsigned int num);
-#else
-static inline struct resource *pnp_get_resource(struct pnp_dev *dev,
-			unsigned long type, unsigned int num)
-{
-	return NULL;
-}
-#endif
-
-static inline int pnp_resource_valid(struct resource *res)
-{
-	if (res)
-		return 1;
-	return 0;
-}
-
-static inline int pnp_resource_enabled(struct resource *res)
-{
-	if (res && !(res->flags & IORESOURCE_DISABLED))
-		return 1;
-	return 0;
-}
-
-static inline resource_size_t pnp_resource_len(struct resource *res)
-{
-	if (res->start == 0 && res->end == 0)
-		return 0;
-	return resource_size(res);
-}
-
-
-static inline resource_size_t pnp_port_start(struct pnp_dev *dev,
-					     unsigned int bar)
-{
-	struct resource *res = pnp_get_resource(dev, IORESOURCE_IO, bar);
-
-	if (pnp_resource_valid(res))
-		return res->start;
-	return 0;
-}
-
-static inline resource_size_t pnp_port_end(struct pnp_dev *dev,
-					   unsigned int bar)
-{
-	struct resource *res = pnp_get_resource(dev, IORESOURCE_IO, bar);
-
-	if (pnp_resource_valid(res))
-		return res->end;
-	return 0;
-}
-
-static inline unsigned long pnp_port_flags(struct pnp_dev *dev,
-					   unsigned int bar)
-{
-	struct resource *res = pnp_get_resource(dev, IORESOURCE_IO, bar);
-
-	if (pnp_resource_valid(res))
-		return res->flags;
-	return IORESOURCE_IO | IORESOURCE_AUTO;
-}
-
-static inline int pnp_port_valid(struct pnp_dev *dev, unsigned int bar)
-{
-	return pnp_resource_valid(pnp_get_resource(dev, IORESOURCE_IO, bar));
-}
-
-static inline resource_size_t pnp_port_len(struct pnp_dev *dev,
-					   unsigned int bar)
-{
-	struct resource *res = pnp_get_resource(dev, IORESOURCE_IO, bar);
-
-	if (pnp_resource_valid(res))
-		return pnp_resource_len(res);
-	return 0;
-}
-
-
-static inline resource_size_t pnp_mem_start(struct pnp_dev *dev,
-					    unsigned int bar)
-{
-	struct resource *res = pnp_get_resource(dev, IORESOURCE_MEM, bar);
-
-	if (pnp_resource_valid(res))
-		return res->start;
-	return 0;
-}
-
-static inline resource_size_t pnp_mem_end(struct pnp_dev *dev,
-					  unsigned int bar)
-{
-	struct resource *res = pnp_get_resource(dev, IORESOURCE_MEM, bar);
-
-	if (pnp_resource_valid(res))
-		return res->end;
-	return 0;
-}
-
-static inline unsigned long pnp_mem_flags(struct pnp_dev *dev, unsigned int bar)
-{
-	struct resource *res = pnp_get_resource(dev, IORESOURCE_MEM, bar);
-
-	if (pnp_resource_valid(res))
-		return res->flags;
-	return IORESOURCE_MEM | IORESOURCE_AUTO;
-}
-
-static inline int pnp_mem_valid(struct pnp_dev *dev, unsigned int bar)
-{
-	return pnp_resource_valid(pnp_get_resource(dev, IORESOURCE_MEM, bar));
-}
-
-static inline resource_size_t pnp_mem_len(struct pnp_dev *dev,
-					  unsigned int bar)
-{
-	struct resource *res = pnp_get_resource(dev, IORESOURCE_MEM, bar);
-
-	if (pnp_resource_valid(res))
-		return pnp_resource_len(res);
-	return 0;
-}
-
-
-static inline resource_size_t pnp_irq(struct pnp_dev *dev, unsigned int bar)
-{
-	struct resource *res = pnp_get_resource(dev, IORESOURCE_IRQ, bar);
-
-	if (pnp_resource_valid(res))
-		return res->start;
-	return -1;
-}
-
-static inline unsigned long pnp_irq_flags(struct pnp_dev *dev, unsigned int bar)
-{
-	struct resource *res = pnp_get_resource(dev, IORESOURCE_IRQ, bar);
-
-	if (pnp_resource_valid(res))
-		return res->flags;
-	return IORESOURCE_IRQ | IORESOURCE_AUTO;
-}
-
-static inline int pnp_irq_valid(struct pnp_dev *dev, unsigned int bar)
-{
-	return pnp_resource_valid(pnp_get_resource(dev, IORESOURCE_IRQ, bar));
-}
-
-
-static inline resource_size_t pnp_dma(struct pnp_dev *dev, unsigned int bar)
-{
-	struct resource *res = pnp_get_resource(dev, IORESOURCE_DMA, bar);
-
-	if (pnp_resource_valid(res))
-		return res->start;
-	return -1;
-}
-
-static inline unsigned long pnp_dma_flags(struct pnp_dev *dev, unsigned int bar)
-{
-	struct resource *res = pnp_get_resource(dev, IORESOURCE_DMA, bar);
-
-	if (pnp_resource_valid(res))
-		return res->flags;
-	return IORESOURCE_DMA | IORESOURCE_AUTO;
-}
-
-static inline int pnp_dma_valid(struct pnp_dev *dev, unsigned int bar)
-{
-	return pnp_resource_valid(pnp_get_resource(dev, IORESOURCE_DMA, bar));
-}
-
-
-/*
- * Device Management
- */
-
-struct pnp_card {
-	struct device dev;		/* Driver Model device interface */
-	unsigned char number;		/* used as an index, must be unique */
-	struct list_head global_list;	/* node in global list of cards */
-	struct list_head protocol_list;	/* node in protocol's list of cards */
-	struct list_head devices;	/* devices attached to the card */
-
-	struct pnp_protocol *protocol;
-	struct pnp_id *id;		/* contains supported EISA IDs */
-
-	char name[PNP_NAME_LEN];	/* contains a human-readable name */
-	unsigned char pnpver;		/* Plug & Play version */
-	unsigned char productver;	/* product version */
-	unsigned int serial;		/* serial number */
-	unsigned char checksum;		/* if zero - checksum passed */
-	struct proc_dir_entry *procdir;	/* directory entry in /proc/bus/isapnp */
-};
-
-#define global_to_pnp_card(n) list_entry(n, struct pnp_card, global_list)
-#define protocol_to_pnp_card(n) list_entry(n, struct pnp_card, protocol_list)
-#define to_pnp_card(n) container_of(n, struct pnp_card, dev)
-#define pnp_for_each_card(card) \
-	for((card) = global_to_pnp_card(pnp_cards.next); \
-	(card) != global_to_pnp_card(&pnp_cards); \
-	(card) = global_to_pnp_card((card)->global_list.next))
-
-struct pnp_card_link {
-	struct pnp_card *card;
-	struct pnp_card_driver *driver;
-	void *driver_data;
-	pm_message_t pm_state;
-};
-
-static inline void *pnp_get_card_drvdata(struct pnp_card_link *pcard)
-{
-	return pcard->driver_data;
-}
-
-static inline void pnp_set_card_drvdata(struct pnp_card_link *pcard, void *data)
-{
-	pcard->driver_data = data;
-}
-
-struct pnp_dev {
-	struct device dev;		/* Driver Model device interface */
-	u64 dma_mask;
-	unsigned int number;		/* used as an index, must be unique */
-	int status;
-
-	struct list_head global_list;	/* node in global list of devices */
-	struct list_head protocol_list;	/* node in list of device's protocol */
-	struct list_head card_list;	/* node in card's list of devices */
-	struct list_head rdev_list;	/* node in cards list of requested devices */
-
-	struct pnp_protocol *protocol;
-	struct pnp_card *card;	/* card the device is attached to, none if NULL */
-	struct pnp_driver *driver;
-	struct pnp_card_link *card_link;
-
-	struct pnp_id *id;		/* supported EISA IDs */
-
-	int active;
-	int capabilities;
-	unsigned int num_dependent_sets;
-	struct list_head resources;
-	struct list_head options;
-
-	char name[PNP_NAME_LEN];	/* contains a human-readable name */
-	int flags;			/* used by protocols */
-	struct proc_dir_entry *procent;	/* device entry in /proc/bus/isapnp */
-	void *data;
-};
-
-#define global_to_pnp_dev(n) list_entry(n, struct pnp_dev, global_list)
-#define card_to_pnp_dev(n) list_entry(n, struct pnp_dev, card_list)
-#define protocol_to_pnp_dev(n) list_entry(n, struct pnp_dev, protocol_list)
-#define	to_pnp_dev(n) container_of(n, struct pnp_dev, dev)
-#define pnp_for_each_dev(dev) \
-	for((dev) = global_to_pnp_dev(pnp_global.next); \
-	(dev) != global_to_pnp_dev(&pnp_global); \
-	(dev) = global_to_pnp_dev((dev)->global_list.next))
-#define card_for_each_dev(card,dev) \
-	for((dev) = card_to_pnp_dev((card)->devices.next); \
-	(dev) != card_to_pnp_dev(&(card)->devices); \
-	(dev) = card_to_pnp_dev((dev)->card_list.next))
-#define pnp_dev_name(dev) (dev)->name
-
-static inline void *pnp_get_drvdata(struct pnp_dev *pdev)
-{
-	return dev_get_drvdata(&pdev->dev);
-}
-
-static inline void pnp_set_drvdata(struct pnp_dev *pdev, void *data)
-{
-	dev_set_drvdata(&pdev->dev, data);
-}
-
-struct pnp_fixup {
-	char id[7];
-	void (*quirk_function) (struct pnp_dev * dev);	/* fixup function */
-};
-
-/* config parameters */
-#define PNP_CONFIG_NORMAL	0x0001
-#define PNP_CONFIG_FORCE	0x0002	/* disables validity checking */
-
-/* capabilities */
-#define PNP_READ		0x0001
-#define PNP_WRITE		0x0002
-#define PNP_DISABLE		0x0004
-#define PNP_CONFIGURABLE	0x0008
-#define PNP_REMOVABLE		0x0010
-
-#define pnp_can_read(dev)	(((dev)->protocol->get) && \
-				 ((dev)->capabilities & PNP_READ))
-#define pnp_can_write(dev)	(((dev)->protocol->set) && \
-				 ((dev)->capabilities & PNP_WRITE))
-#define pnp_can_disable(dev)	(((dev)->protocol->disable) && \
-				 ((dev)->capabilities & PNP_DISABLE))
-#define pnp_can_configure(dev)	((!(dev)->active) && \
-				 ((dev)->capabilities & PNP_CONFIGURABLE))
-
-#ifdef CONFIG_ISAPNP
-extern struct pnp_protocol isapnp_protocol;
-#define pnp_device_is_isapnp(dev) ((dev)->protocol == (&isapnp_protocol))
-#else
-#define pnp_device_is_isapnp(dev) 0
-#endif
-extern struct mutex pnp_res_mutex;
-
-#ifdef CONFIG_PNPBIOS
-extern struct pnp_protocol pnpbios_protocol;
-#define pnp_device_is_pnpbios(dev) ((dev)->protocol == (&pnpbios_protocol))
-#else
-#define pnp_device_is_pnpbios(dev) 0
-#endif
-
-#ifdef CONFIG_PNPACPI
-extern struct pnp_protocol pnpacpi_protocol;
-
-static inline struct acpi_device *pnp_acpi_device(struct pnp_dev *dev)
-{
-	if (dev->protocol == &pnpacpi_protocol)
-		return dev->data;
-	return NULL;
-}
-#else
-#define pnp_acpi_device(dev) 0
-#endif
-
-/* status */
-#define PNP_READY		0x0000
-#define PNP_ATTACHED		0x0001
-#define PNP_BUSY		0x0002
-#define PNP_FAULTY		0x0004
-
-/* isapnp specific macros */
-
-#define isapnp_card_number(dev)	((dev)->card ? (dev)->card->number : -1)
-#define isapnp_csn_number(dev)  ((dev)->number)
-
-/*
- * Driver Management
- */
-
-struct pnp_id {
-	char id[PNP_ID_LEN];
-	struct pnp_id *next;
-};
-
-struct pnp_driver {
-	char *name;
-	const struct pnp_device_id *id_table;
-	unsigned int flags;
-	int (*probe) (struct pnp_dev *dev, const struct pnp_device_id *dev_id);
-	void (*remove) (struct pnp_dev *dev);
-	void (*shutdown) (struct pnp_dev *dev);
-	int (*suspend) (struct pnp_dev *dev, pm_message_t state);
-	int (*resume) (struct pnp_dev *dev);
-	struct device_driver driver;
-};
-
-#define	to_pnp_driver(drv) container_of(drv, struct pnp_driver, driver)
-
-struct pnp_card_driver {
-	struct list_head global_list;
-	char *name;
-	const struct pnp_card_device_id *id_table;
-	unsigned int flags;
-	int (*probe) (struct pnp_card_link *card,
-		      const struct pnp_card_device_id *card_id);
-	void (*remove) (struct pnp_card_link *card);
-	int (*suspend) (struct pnp_card_link *card, pm_message_t state);
-	int (*resume) (struct pnp_card_link *card);
-	struct pnp_driver link;
-};
-
-#define	to_pnp_card_driver(drv) container_of(drv, struct pnp_card_driver, link)
-
-/* pnp driver flags */
-#define PNP_DRIVER_RES_DO_NOT_CHANGE	0x0001	/* do not change the state of the device */
-#define PNP_DRIVER_RES_DISABLE		0x0003	/* ensure the device is disabled */
-
-/*
- * Protocol Management
- */
-
-struct pnp_protocol {
-	struct list_head protocol_list;
-	char *name;
-
-	/* resource control functions */
-	int (*get) (struct pnp_dev *dev);
-	int (*set) (struct pnp_dev *dev);
-	int (*disable) (struct pnp_dev *dev);
-
-	/* protocol specific suspend/resume */
-	bool (*can_wakeup) (struct pnp_dev *dev);
-	int (*suspend) (struct pnp_dev * dev, pm_message_t state);
-	int (*resume) (struct pnp_dev * dev);
-
-	/* used by pnp layer only (look but don't touch) */
-	unsigned char number;	/* protocol number */
-	struct device dev;	/* link to driver model */
-	struct list_head cards;
-	struct list_head devices;
-};
-
-#define to_pnp_protocol(n) list_entry(n, struct pnp_protocol, protocol_list)
-#define protocol_for_each_card(protocol,card) \
-	for((card) = protocol_to_pnp_card((protocol)->cards.next); \
-	(card) != protocol_to_pnp_card(&(protocol)->cards); \
-	(card) = protocol_to_pnp_card((card)->protocol_list.next))
-#define protocol_for_each_dev(protocol,dev) \
-	for((dev) = protocol_to_pnp_dev((protocol)->devices.next); \
-	(dev) != protocol_to_pnp_dev(&(protocol)->devices); \
-	(dev) = protocol_to_pnp_dev((dev)->protocol_list.next))
-
-extern struct bus_type pnp_bus_type;
-
-#if defined(CONFIG_PNP)
-
-/* device management */
-int pnp_device_attach(struct pnp_dev *pnp_dev);
-void pnp_device_detach(struct pnp_dev *pnp_dev);
-extern struct list_head pnp_global;
-extern int pnp_platform_devices;
-
-/* multidevice card support */
-struct pnp_dev *pnp_request_card_device(struct pnp_card_link *clink,
-					const char *id, struct pnp_dev *from);
-void pnp_release_card_device(struct pnp_dev *dev);
-int pnp_register_card_driver(struct pnp_card_driver *drv);
-void pnp_unregister_card_driver(struct pnp_card_driver *drv);
-extern struct list_head pnp_cards;
-
-/* resource management */
-int pnp_possible_config(struct pnp_dev *dev, int type, resource_size_t base,
-			resource_size_t size);
-int pnp_auto_config_dev(struct pnp_dev *dev);
-int pnp_start_dev(struct pnp_dev *dev);
-int pnp_stop_dev(struct pnp_dev *dev);
-int pnp_activate_dev(struct pnp_dev *dev);
-int pnp_disable_dev(struct pnp_dev *dev);
-int pnp_range_reserved(resource_size_t start, resource_size_t end);
-
-/* protocol helpers */
-int pnp_is_active(struct pnp_dev *dev);
-int compare_pnp_id(struct pnp_id *pos, const char *id);
-int pnp_register_driver(struct pnp_driver *drv);
-void pnp_unregister_driver(struct pnp_driver *drv);
-
-#else
-
-/* device management */
-static inline int pnp_device_attach(struct pnp_dev *pnp_dev) { return -ENODEV; }
-static inline void pnp_device_detach(struct pnp_dev *pnp_dev) { }
-
-#define pnp_platform_devices 0
-
-/* multidevice card support */
-static inline struct pnp_dev *pnp_request_card_device(struct pnp_card_link *clink, const char *id, struct pnp_dev *from) { return NULL; }
-static inline void pnp_release_card_device(struct pnp_dev *dev) { }
-static inline int pnp_register_card_driver(struct pnp_card_driver *drv) { return -ENODEV; }
-static inline void pnp_unregister_card_driver(struct pnp_card_driver *drv) { }
-
-/* resource management */
-static inline int pnp_possible_config(struct pnp_dev *dev, int type,
-				      resource_size_t base,
-				      resource_size_t size) { return 0; }
-static inline int pnp_auto_config_dev(struct pnp_dev *dev) { return -ENODEV; }
-static inline int pnp_start_dev(struct pnp_dev *dev) { return -ENODEV; }
-static inline int pnp_stop_dev(struct pnp_dev *dev) { return -ENODEV; }
-static inline int pnp_activate_dev(struct pnp_dev *dev) { return -ENODEV; }
-static inline int pnp_disable_dev(struct pnp_dev *dev) { return -ENODEV; }
-static inline int pnp_range_reserved(resource_size_t start, resource_size_t end) { return 0;}
-
-/* protocol helpers */
-static inline int pnp_is_active(struct pnp_dev *dev) { return 0; }
-static inline int compare_pnp_id(struct pnp_id *pos, const char *id) { return -ENODEV; }
-static inline int pnp_register_driver(struct pnp_driver *drv) { return -ENODEV; }
-static inline void pnp_unregister_driver(struct pnp_driver *drv) { }
-
-#endif /* CONFIG_PNP */
-
-#endif /* _LINUX_PNP_H */
diff --git a/ANDROID_3.4.5/include/linux/poison.h b/ANDROID_3.4.5/include/linux/poison.h
deleted file mode 100644
index 2110a81c..00000000
--- a/ANDROID_3.4.5/include/linux/poison.h
+++ /dev/null
@@ -1,89 +0,0 @@
-#ifndef _LINUX_POISON_H
-#define _LINUX_POISON_H
-
-/********** include/linux/list.h **********/
-
-/*
- * Architectures might want to move the poison pointer offset
- * into some well-recognized area such as 0xdead000000000000,
- * that is also not mappable by user-space exploits:
- */
-#ifdef CONFIG_ILLEGAL_POINTER_VALUE
-# define POISON_POINTER_DELTA _AC(CONFIG_ILLEGAL_POINTER_VALUE, UL)
-#else
-# define POISON_POINTER_DELTA 0
-#endif
-
-/*
- * These are non-NULL pointers that will result in page faults
- * under normal circumstances, used to verify that nobody uses
- * non-initialized list entries.
- */
-#define LIST_POISON1  ((void *) 0x00100100 + POISON_POINTER_DELTA)
-#define LIST_POISON2  ((void *) 0x00200200 + POISON_POINTER_DELTA)
-
-/********** include/linux/timer.h **********/
-/*
- * Magic number "tsta" to indicate a static timer initializer
- * for the object debugging code.
- */
-#define TIMER_ENTRY_STATIC	((void *) 0x74737461)
-
-/********** mm/debug-pagealloc.c **********/
-#define PAGE_POISON 0xaa
-
-/********** mm/slab.c **********/
-/*
- * Magic nums for obj red zoning.
- * Placed in the first word before and the first word after an obj.
- */
-#define	RED_INACTIVE	0x09F911029D74E35BULL	/* when obj is inactive */
-#define	RED_ACTIVE	0xD84156C5635688C0ULL	/* when obj is active */
-
-#define SLUB_RED_INACTIVE	0xbb
-#define SLUB_RED_ACTIVE		0xcc
-
-/* ...and for poisoning */
-#define	POISON_INUSE	0x5a	/* for use-uninitialised poisoning */
-#define POISON_FREE	0x6b	/* for use-after-free poisoning */
-#define	POISON_END	0xa5	/* end-byte of poisoning */
-
-/********** arch/$ARCH/mm/init.c **********/
-#define POISON_FREE_INITMEM	0xcc
-
-/********** arch/ia64/hp/common/sba_iommu.c **********/
-/*
- * arch/ia64/hp/common/sba_iommu.c uses a 16-byte poison string with a
- * value of "SBAIOMMU POISON\0" for spill-over poisoning.
- */
-
-/********** fs/jbd/journal.c **********/
-#define JBD_POISON_FREE		0x5b
-#define JBD2_POISON_FREE	0x5c
-
-/********** drivers/base/dmapool.c **********/
-#define	POOL_POISON_FREED	0xa7	/* !inuse */
-#define	POOL_POISON_ALLOCATED	0xa9	/* !initted */
-
-/********** drivers/atm/ **********/
-#define ATM_POISON_FREE		0x12
-#define ATM_POISON		0xdeadbeef
-
-/********** net/ **********/
-#define NEIGHBOR_DEAD		0xdeadbeef
-#define NETFILTER_LINK_POISON	0xdead57ac
-
-/********** kernel/mutexes **********/
-#define MUTEX_DEBUG_INIT	0x11
-#define MUTEX_DEBUG_FREE	0x22
-
-/********** lib/flex_array.c **********/
-#define FLEX_ARRAY_FREE	0x6c	/* for use-after-free poisoning */
-
-/********** security/ **********/
-#define KEY_DESTROY		0xbd
-
-/********** sound/oss/ **********/
-#define OSS_POISON_FREE		0xAB
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/poll.h b/ANDROID_3.4.5/include/linux/poll.h
deleted file mode 100644
index 48fe8bc3..00000000
--- a/ANDROID_3.4.5/include/linux/poll.h
+++ /dev/null
@@ -1,168 +0,0 @@
-#ifndef _LINUX_POLL_H
-#define _LINUX_POLL_H
-
-#include <asm/poll.h>
-
-#ifdef __KERNEL__
-
-#include <linux/compiler.h>
-#include <linux/ktime.h>
-#include <linux/wait.h>
-#include <linux/string.h>
-#include <linux/fs.h>
-#include <linux/sysctl.h>
-#include <asm/uaccess.h>
-
-extern struct ctl_table epoll_table[]; /* for sysctl */
-/* ~832 bytes of stack space used max in sys_select/sys_poll before allocating
-   additional memory. */
-#define MAX_STACK_ALLOC 832
-#define FRONTEND_STACK_ALLOC	256
-#define SELECT_STACK_ALLOC	FRONTEND_STACK_ALLOC
-#define POLL_STACK_ALLOC	FRONTEND_STACK_ALLOC
-#define WQUEUES_STACK_ALLOC	(MAX_STACK_ALLOC - FRONTEND_STACK_ALLOC)
-#define N_INLINE_POLL_ENTRIES	(WQUEUES_STACK_ALLOC / sizeof(struct poll_table_entry))
-
-#define DEFAULT_POLLMASK (POLLIN | POLLOUT | POLLRDNORM | POLLWRNORM)
-
-struct poll_table_struct;
-
-/* 
- * structures and helpers for f_op->poll implementations
- */
-typedef void (*poll_queue_proc)(struct file *, wait_queue_head_t *, struct poll_table_struct *);
-
-/*
- * Do not touch the structure directly, use the access functions
- * poll_does_not_wait() and poll_requested_events() instead.
- */
-typedef struct poll_table_struct {
-	poll_queue_proc _qproc;
-	unsigned long _key;
-} poll_table;
-
-static inline void poll_wait(struct file * filp, wait_queue_head_t * wait_address, poll_table *p)
-{
-	if (p && p->_qproc && wait_address)
-		p->_qproc(filp, wait_address, p);
-}
-
-/*
- * Return true if it is guaranteed that poll will not wait. This is the case
- * if the poll() of another file descriptor in the set got an event, so there
- * is no need for waiting.
- */
-static inline bool poll_does_not_wait(const poll_table *p)
-{
-	return p == NULL || p->_qproc == NULL;
-}
-
-/*
- * Return the set of events that the application wants to poll for.
- * This is useful for drivers that need to know whether a DMA transfer has
- * to be started implicitly on poll(). You typically only want to do that
- * if the application is actually polling for POLLIN and/or POLLOUT.
- */
-static inline unsigned long poll_requested_events(const poll_table *p)
-{
-	return p ? p->_key : ~0UL;
-}
-
-static inline void init_poll_funcptr(poll_table *pt, poll_queue_proc qproc)
-{
-	pt->_qproc = qproc;
-	pt->_key   = ~0UL; /* all events enabled */
-}
-
-struct poll_table_entry {
-	struct file *filp;
-	unsigned long key;
-	wait_queue_t wait;
-	wait_queue_head_t *wait_address;
-};
-
-/*
- * Structures and helpers for select/poll syscall
- */
-struct poll_wqueues {
-	poll_table pt;
-	struct poll_table_page *table;
-	struct task_struct *polling_task;
-	int triggered;
-	int error;
-	int inline_index;
-	struct poll_table_entry inline_entries[N_INLINE_POLL_ENTRIES];
-};
-
-extern void poll_initwait(struct poll_wqueues *pwq);
-extern void poll_freewait(struct poll_wqueues *pwq);
-extern int poll_schedule_timeout(struct poll_wqueues *pwq, int state,
-				 ktime_t *expires, unsigned long slack);
-extern long select_estimate_accuracy(struct timespec *tv);
-
-
-static inline int poll_schedule(struct poll_wqueues *pwq, int state)
-{
-	return poll_schedule_timeout(pwq, state, NULL, 0);
-}
-
-/*
- * Scalable version of the fd_set.
- */
-
-typedef struct {
-	unsigned long *in, *out, *ex;
-	unsigned long *res_in, *res_out, *res_ex;
-} fd_set_bits;
-
-/*
- * How many longwords for "nr" bits?
- */
-#define FDS_BITPERLONG	(8*sizeof(long))
-#define FDS_LONGS(nr)	(((nr)+FDS_BITPERLONG-1)/FDS_BITPERLONG)
-#define FDS_BYTES(nr)	(FDS_LONGS(nr)*sizeof(long))
-
-/*
- * We do a VERIFY_WRITE here even though we are only reading this time:
- * we'll write to it eventually..
- *
- * Use "unsigned long" accesses to let user-mode fd_set's be long-aligned.
- */
-static inline
-int get_fd_set(unsigned long nr, void __user *ufdset, unsigned long *fdset)
-{
-	nr = FDS_BYTES(nr);
-	if (ufdset)
-		return copy_from_user(fdset, ufdset, nr) ? -EFAULT : 0;
-
-	memset(fdset, 0, nr);
-	return 0;
-}
-
-static inline unsigned long __must_check
-set_fd_set(unsigned long nr, void __user *ufdset, unsigned long *fdset)
-{
-	if (ufdset)
-		return __copy_to_user(ufdset, fdset, FDS_BYTES(nr));
-	return 0;
-}
-
-static inline
-void zero_fd_set(unsigned long nr, unsigned long *fdset)
-{
-	memset(fdset, 0, FDS_BYTES(nr));
-}
-
-#define MAX_INT64_SECONDS (((s64)(~((u64)0)>>1)/HZ)-1)
-
-extern int do_select(int n, fd_set_bits *fds, struct timespec *end_time);
-extern int do_sys_poll(struct pollfd __user * ufds, unsigned int nfds,
-		       struct timespec *end_time);
-extern int core_sys_select(int n, fd_set __user *inp, fd_set __user *outp,
-			   fd_set __user *exp, struct timespec *end_time);
-
-extern int poll_select_set_timeout(struct timespec *to, long sec, long nsec);
-
-#endif /* KERNEL */
-
-#endif /* _LINUX_POLL_H */
diff --git a/ANDROID_3.4.5/include/linux/posix-clock.h b/ANDROID_3.4.5/include/linux/posix-clock.h
deleted file mode 100644
index 34c4498b..00000000
--- a/ANDROID_3.4.5/include/linux/posix-clock.h
+++ /dev/null
@@ -1,151 +0,0 @@
-/*
- * posix-clock.h - support for dynamic clock devices
- *
- * Copyright (C) 2010 OMICRON electronics GmbH
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-#ifndef _LINUX_POSIX_CLOCK_H_
-#define _LINUX_POSIX_CLOCK_H_
-
-#include <linux/cdev.h>
-#include <linux/fs.h>
-#include <linux/poll.h>
-#include <linux/posix-timers.h>
-#include <linux/rwsem.h>
-
-struct posix_clock;
-
-/**
- * struct posix_clock_operations - functional interface to the clock
- *
- * Every posix clock is represented by a character device. Drivers may
- * optionally offer extended capabilities by implementing the
- * character device methods. The character device file operations are
- * first handled by the clock device layer, then passed on to the
- * driver by calling these functions.
- *
- * @owner:          The clock driver should set to THIS_MODULE
- * @clock_adjtime:  Adjust the clock
- * @clock_gettime:  Read the current time
- * @clock_getres:   Get the clock resolution
- * @clock_settime:  Set the current time value
- * @timer_create:   Create a new timer
- * @timer_delete:   Remove a previously created timer
- * @timer_gettime:  Get remaining time and interval of a timer
- * @timer_settime: Set a timer's initial expiration and interval
- * @fasync:         Optional character device fasync method
- * @mmap:           Optional character device mmap method
- * @open:           Optional character device open method
- * @release:        Optional character device release method
- * @ioctl:          Optional character device ioctl method
- * @read:           Optional character device read method
- * @poll:           Optional character device poll method
- */
-struct posix_clock_operations {
-	struct module *owner;
-
-	int  (*clock_adjtime)(struct posix_clock *pc, struct timex *tx);
-
-	int  (*clock_gettime)(struct posix_clock *pc, struct timespec *ts);
-
-	int  (*clock_getres) (struct posix_clock *pc, struct timespec *ts);
-
-	int  (*clock_settime)(struct posix_clock *pc,
-			      const struct timespec *ts);
-
-	int  (*timer_create) (struct posix_clock *pc, struct k_itimer *kit);
-
-	int  (*timer_delete) (struct posix_clock *pc, struct k_itimer *kit);
-
-	void (*timer_gettime)(struct posix_clock *pc,
-			      struct k_itimer *kit, struct itimerspec *tsp);
-
-	int  (*timer_settime)(struct posix_clock *pc,
-			      struct k_itimer *kit, int flags,
-			      struct itimerspec *tsp, struct itimerspec *old);
-	/*
-	 * Optional character device methods:
-	 */
-	int     (*fasync)  (struct posix_clock *pc,
-			    int fd, struct file *file, int on);
-
-	long    (*ioctl)   (struct posix_clock *pc,
-			    unsigned int cmd, unsigned long arg);
-
-	int     (*mmap)    (struct posix_clock *pc,
-			    struct vm_area_struct *vma);
-
-	int     (*open)    (struct posix_clock *pc, fmode_t f_mode);
-
-	uint    (*poll)    (struct posix_clock *pc,
-			    struct file *file, poll_table *wait);
-
-	int     (*release) (struct posix_clock *pc);
-
-	ssize_t (*read)    (struct posix_clock *pc,
-			    uint flags, char __user *buf, size_t cnt);
-};
-
-/**
- * struct posix_clock - represents a dynamic posix clock
- *
- * @ops:     Functional interface to the clock
- * @cdev:    Character device instance for this clock
- * @kref:    Reference count.
- * @rwsem:   Protects the 'zombie' field from concurrent access.
- * @zombie:  If 'zombie' is true, then the hardware has disappeared.
- * @release: A function to free the structure when the reference count reaches
- *           zero. May be NULL if structure is statically allocated.
- *
- * Drivers should embed their struct posix_clock within a private
- * structure, obtaining a reference to it during callbacks using
- * container_of().
- */
-struct posix_clock {
-	struct posix_clock_operations ops;
-	struct cdev cdev;
-	struct kref kref;
-	struct rw_semaphore rwsem;
-	bool zombie;
-	void (*release)(struct posix_clock *clk);
-};
-
-/**
- * posix_clock_register() - register a new clock
- * @clk:   Pointer to the clock. Caller must provide 'ops' and 'release'
- * @devid: Allocated device id
- *
- * A clock driver calls this function to register itself with the
- * clock device subsystem. If 'clk' points to dynamically allocated
- * memory, then the caller must provide a 'release' function to free
- * that memory.
- *
- * Returns zero on success, non-zero otherwise.
- */
-int posix_clock_register(struct posix_clock *clk, dev_t devid);
-
-/**
- * posix_clock_unregister() - unregister a clock
- * @clk: Clock instance previously registered via posix_clock_register()
- *
- * A clock driver calls this function to remove itself from the clock
- * device subsystem. The posix_clock itself will remain (in an
- * inactive state) until its reference count drops to zero, at which
- * point it will be deallocated with its 'release' method.
- */
-void posix_clock_unregister(struct posix_clock *clk);
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/posix-timers.h b/ANDROID_3.4.5/include/linux/posix-timers.h
deleted file mode 100644
index 042058fd..00000000
--- a/ANDROID_3.4.5/include/linux/posix-timers.h
+++ /dev/null
@@ -1,132 +0,0 @@
-#ifndef _linux_POSIX_TIMERS_H
-#define _linux_POSIX_TIMERS_H
-
-#include <linux/spinlock.h>
-#include <linux/list.h>
-#include <linux/sched.h>
-#include <linux/timex.h>
-#include <linux/alarmtimer.h>
-
-union cpu_time_count {
-	cputime_t cpu;
-	unsigned long long sched;
-};
-
-struct cpu_timer_list {
-	struct list_head entry;
-	union cpu_time_count expires, incr;
-	struct task_struct *task;
-	int firing;
-};
-
-/*
- * Bit fields within a clockid:
- *
- * The most significant 29 bits hold either a pid or a file descriptor.
- *
- * Bit 2 indicates whether a cpu clock refers to a thread or a process.
- *
- * Bits 1 and 0 give the type: PROF=0, VIRT=1, SCHED=2, or FD=3.
- *
- * A clockid is invalid if bits 2, 1, and 0 are all set.
- */
-#define CPUCLOCK_PID(clock)		((pid_t) ~((clock) >> 3))
-#define CPUCLOCK_PERTHREAD(clock) \
-	(((clock) & (clockid_t) CPUCLOCK_PERTHREAD_MASK) != 0)
-
-#define CPUCLOCK_PERTHREAD_MASK	4
-#define CPUCLOCK_WHICH(clock)	((clock) & (clockid_t) CPUCLOCK_CLOCK_MASK)
-#define CPUCLOCK_CLOCK_MASK	3
-#define CPUCLOCK_PROF		0
-#define CPUCLOCK_VIRT		1
-#define CPUCLOCK_SCHED		2
-#define CPUCLOCK_MAX		3
-#define CLOCKFD			CPUCLOCK_MAX
-#define CLOCKFD_MASK		(CPUCLOCK_PERTHREAD_MASK|CPUCLOCK_CLOCK_MASK)
-
-#define MAKE_PROCESS_CPUCLOCK(pid, clock) \
-	((~(clockid_t) (pid) << 3) | (clockid_t) (clock))
-#define MAKE_THREAD_CPUCLOCK(tid, clock) \
-	MAKE_PROCESS_CPUCLOCK((tid), (clock) | CPUCLOCK_PERTHREAD_MASK)
-
-#define FD_TO_CLOCKID(fd)	((~(clockid_t) (fd) << 3) | CLOCKFD)
-#define CLOCKID_TO_FD(clk)	((unsigned int) ~((clk) >> 3))
-
-/* POSIX.1b interval timer structure. */
-struct k_itimer {
-	struct list_head list;		/* free/ allocate list */
-	spinlock_t it_lock;
-	clockid_t it_clock;		/* which timer type */
-	timer_t it_id;			/* timer id */
-	int it_overrun;			/* overrun on pending signal  */
-	int it_overrun_last;		/* overrun on last delivered signal */
-	int it_requeue_pending;		/* waiting to requeue this timer */
-#define REQUEUE_PENDING 1
-	int it_sigev_notify;		/* notify word of sigevent struct */
-	struct signal_struct *it_signal;
-	union {
-		struct pid *it_pid;	/* pid of process to send signal to */
-		struct task_struct *it_process;	/* for clock_nanosleep */
-	};
-	struct sigqueue *sigq;		/* signal queue entry. */
-	union {
-		struct {
-			struct hrtimer timer;
-			ktime_t interval;
-		} real;
-		struct cpu_timer_list cpu;
-		struct {
-			unsigned int clock;
-			unsigned int node;
-			unsigned long incr;
-			unsigned long expires;
-		} mmtimer;
-		struct {
-			struct alarm alarmtimer;
-			ktime_t interval;
-		} alarm;
-		struct rcu_head rcu;
-	} it;
-};
-
-struct k_clock {
-	int (*clock_getres) (const clockid_t which_clock, struct timespec *tp);
-	int (*clock_set) (const clockid_t which_clock,
-			  const struct timespec *tp);
-	int (*clock_get) (const clockid_t which_clock, struct timespec * tp);
-	int (*clock_adj) (const clockid_t which_clock, struct timex *tx);
-	int (*timer_create) (struct k_itimer *timer);
-	int (*nsleep) (const clockid_t which_clock, int flags,
-		       struct timespec *, struct timespec __user *);
-	long (*nsleep_restart) (struct restart_block *restart_block);
-	int (*timer_set) (struct k_itimer * timr, int flags,
-			  struct itimerspec * new_setting,
-			  struct itimerspec * old_setting);
-	int (*timer_del) (struct k_itimer * timr);
-#define TIMER_RETRY 1
-	void (*timer_get) (struct k_itimer * timr,
-			   struct itimerspec * cur_setting);
-};
-
-extern struct k_clock clock_posix_cpu;
-extern struct k_clock clock_posix_dynamic;
-
-void posix_timers_register_clock(const clockid_t clock_id, struct k_clock *new_clock);
-
-/* function to call to trigger timer event */
-int posix_timer_event(struct k_itimer *timr, int si_private);
-
-void posix_cpu_timer_schedule(struct k_itimer *timer);
-
-void run_posix_cpu_timers(struct task_struct *task);
-void posix_cpu_timers_exit(struct task_struct *task);
-void posix_cpu_timers_exit_group(struct task_struct *task);
-
-void set_process_cpu_timer(struct task_struct *task, unsigned int clock_idx,
-			   cputime_t *newval, cputime_t *oldval);
-
-long clock_nanosleep_restart(struct restart_block *restart_block);
-
-void update_rlimit_cpu(struct task_struct *task, unsigned long rlim_new);
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/posix_acl.h b/ANDROID_3.4.5/include/linux/posix_acl.h
deleted file mode 100644
index 11bad91c..00000000
--- a/ANDROID_3.4.5/include/linux/posix_acl.h
+++ /dev/null
@@ -1,172 +0,0 @@
-/*
-  File: linux/posix_acl.h
-
-  (C) 2002 Andreas Gruenbacher, <a.gruenbacher@computer.org>
-*/
-
-
-#ifndef __LINUX_POSIX_ACL_H
-#define __LINUX_POSIX_ACL_H
-
-#include <linux/bug.h>
-#include <linux/slab.h>
-#include <linux/rcupdate.h>
-
-#define ACL_UNDEFINED_ID	(-1)
-
-/* a_type field in acl_user_posix_entry_t */
-#define ACL_TYPE_ACCESS		(0x8000)
-#define ACL_TYPE_DEFAULT	(0x4000)
-
-/* e_tag entry in struct posix_acl_entry */
-#define ACL_USER_OBJ		(0x01)
-#define ACL_USER		(0x02)
-#define ACL_GROUP_OBJ		(0x04)
-#define ACL_GROUP		(0x08)
-#define ACL_MASK		(0x10)
-#define ACL_OTHER		(0x20)
-
-/* permissions in the e_perm field */
-#define ACL_READ		(0x04)
-#define ACL_WRITE		(0x02)
-#define ACL_EXECUTE		(0x01)
-//#define ACL_ADD		(0x08)
-//#define ACL_DELETE		(0x10)
-
-struct posix_acl_entry {
-	short			e_tag;
-	unsigned short		e_perm;
-	unsigned int		e_id;
-};
-
-struct posix_acl {
-	union {
-		atomic_t		a_refcount;
-		struct rcu_head		a_rcu;
-	};
-	unsigned int		a_count;
-	struct posix_acl_entry	a_entries[0];
-};
-
-#define FOREACH_ACL_ENTRY(pa, acl, pe) \
-	for(pa=(acl)->a_entries, pe=pa+(acl)->a_count; pa<pe; pa++)
-
-
-/*
- * Duplicate an ACL handle.
- */
-static inline struct posix_acl *
-posix_acl_dup(struct posix_acl *acl)
-{
-	if (acl)
-		atomic_inc(&acl->a_refcount);
-	return acl;
-}
-
-/*
- * Free an ACL handle.
- */
-static inline void
-posix_acl_release(struct posix_acl *acl)
-{
-	if (acl && atomic_dec_and_test(&acl->a_refcount))
-		kfree_rcu(acl, a_rcu);
-}
-
-
-/* posix_acl.c */
-
-extern void posix_acl_init(struct posix_acl *, int);
-extern struct posix_acl *posix_acl_alloc(int, gfp_t);
-extern int posix_acl_valid(const struct posix_acl *);
-extern int posix_acl_permission(struct inode *, const struct posix_acl *, int);
-extern struct posix_acl *posix_acl_from_mode(umode_t, gfp_t);
-extern int posix_acl_equiv_mode(const struct posix_acl *, umode_t *);
-extern int posix_acl_create(struct posix_acl **, gfp_t, umode_t *);
-extern int posix_acl_chmod(struct posix_acl **, gfp_t, umode_t);
-
-extern struct posix_acl *get_posix_acl(struct inode *, int);
-extern int set_posix_acl(struct inode *, int, struct posix_acl *);
-
-#ifdef CONFIG_FS_POSIX_ACL
-static inline struct posix_acl **acl_by_type(struct inode *inode, int type)
-{
-	switch (type) {
-	case ACL_TYPE_ACCESS:
-		return &inode->i_acl;
-	case ACL_TYPE_DEFAULT:
-		return &inode->i_default_acl;
-	default:
-		BUG();
-	}
-}
-
-static inline struct posix_acl *get_cached_acl(struct inode *inode, int type)
-{
-	struct posix_acl **p = acl_by_type(inode, type);
-	struct posix_acl *acl = ACCESS_ONCE(*p);
-	if (acl) {
-		spin_lock(&inode->i_lock);
-		acl = *p;
-		if (acl != ACL_NOT_CACHED)
-			acl = posix_acl_dup(acl);
-		spin_unlock(&inode->i_lock);
-	}
-	return acl;
-}
-
-static inline struct posix_acl *get_cached_acl_rcu(struct inode *inode, int type)
-{
-	return rcu_dereference(*acl_by_type(inode, type));
-}
-
-static inline void set_cached_acl(struct inode *inode,
-				  int type,
-				  struct posix_acl *acl)
-{
-	struct posix_acl **p = acl_by_type(inode, type);
-	struct posix_acl *old;
-	spin_lock(&inode->i_lock);
-	old = *p;
-	rcu_assign_pointer(*p, posix_acl_dup(acl));
-	spin_unlock(&inode->i_lock);
-	if (old != ACL_NOT_CACHED)
-		posix_acl_release(old);
-}
-
-static inline void forget_cached_acl(struct inode *inode, int type)
-{
-	struct posix_acl **p = acl_by_type(inode, type);
-	struct posix_acl *old;
-	spin_lock(&inode->i_lock);
-	old = *p;
-	*p = ACL_NOT_CACHED;
-	spin_unlock(&inode->i_lock);
-	if (old != ACL_NOT_CACHED)
-		posix_acl_release(old);
-}
-
-static inline void forget_all_cached_acls(struct inode *inode)
-{
-	struct posix_acl *old_access, *old_default;
-	spin_lock(&inode->i_lock);
-	old_access = inode->i_acl;
-	old_default = inode->i_default_acl;
-	inode->i_acl = inode->i_default_acl = ACL_NOT_CACHED;
-	spin_unlock(&inode->i_lock);
-	if (old_access != ACL_NOT_CACHED)
-		posix_acl_release(old_access);
-	if (old_default != ACL_NOT_CACHED)
-		posix_acl_release(old_default);
-}
-#endif
-
-static inline void cache_no_acl(struct inode *inode)
-{
-#ifdef CONFIG_FS_POSIX_ACL
-	inode->i_acl = NULL;
-	inode->i_default_acl = NULL;
-#endif
-}
-
-#endif  /* __LINUX_POSIX_ACL_H */
diff --git a/ANDROID_3.4.5/include/linux/posix_acl_xattr.h b/ANDROID_3.4.5/include/linux/posix_acl_xattr.h
deleted file mode 100644
index 6e53c340..00000000
--- a/ANDROID_3.4.5/include/linux/posix_acl_xattr.h
+++ /dev/null
@@ -1,58 +0,0 @@
-/*
-  File: linux/posix_acl_xattr.h
-
-  Extended attribute system call representation of Access Control Lists.
-
-  Copyright (C) 2000 by Andreas Gruenbacher <a.gruenbacher@computer.org>
-  Copyright (C) 2002 SGI - Silicon Graphics, Inc <linux-xfs@oss.sgi.com>
- */
-#ifndef _POSIX_ACL_XATTR_H
-#define _POSIX_ACL_XATTR_H
-
-#include <linux/posix_acl.h>
-
-/* Extended attribute names */
-#define POSIX_ACL_XATTR_ACCESS	"system.posix_acl_access"
-#define POSIX_ACL_XATTR_DEFAULT	"system.posix_acl_default"
-
-/* Supported ACL a_version fields */
-#define POSIX_ACL_XATTR_VERSION	0x0002
-
-
-/* An undefined entry e_id value */
-#define ACL_UNDEFINED_ID	(-1)
-
-typedef struct {
-	__le16			e_tag;
-	__le16			e_perm;
-	__le32			e_id;
-} posix_acl_xattr_entry;
-
-typedef struct {
-	__le32			a_version;
-	posix_acl_xattr_entry	a_entries[0];
-} posix_acl_xattr_header;
-
-
-static inline size_t
-posix_acl_xattr_size(int count)
-{
-	return (sizeof(posix_acl_xattr_header) +
-		(count * sizeof(posix_acl_xattr_entry)));
-}
-
-static inline int
-posix_acl_xattr_count(size_t size)
-{
-	if (size < sizeof(posix_acl_xattr_header))
-		return -1;
-	size -= sizeof(posix_acl_xattr_header);
-	if (size % sizeof(posix_acl_xattr_entry))
-		return -1;
-	return size / sizeof(posix_acl_xattr_entry);
-}
-
-struct posix_acl *posix_acl_from_xattr(const void *value, size_t size);
-int posix_acl_to_xattr(const struct posix_acl *acl, void *buffer, size_t size);
-
-#endif	/* _POSIX_ACL_XATTR_H */
diff --git a/ANDROID_3.4.5/include/linux/posix_types.h b/ANDROID_3.4.5/include/linux/posix_types.h
deleted file mode 100644
index f04c98cf..00000000
--- a/ANDROID_3.4.5/include/linux/posix_types.h
+++ /dev/null
@@ -1,49 +0,0 @@
-#ifndef _LINUX_POSIX_TYPES_H
-#define _LINUX_POSIX_TYPES_H
-
-#include <linux/stddef.h>
-
-/*
- * This allows for 1024 file descriptors: if NR_OPEN is ever grown
- * beyond that you'll have to change this too. But 1024 fd's seem to be
- * enough even for such "real" unices like OSF/1, so hopefully this is
- * one limit that doesn't have to be changed [again].
- *
- * Note that POSIX wants the FD_CLEAR(fd,fdsetp) defines to be in
- * <sys/time.h> (and thus <linux/time.h>) - but this is a more logical
- * place for them. Solved by having dummy defines in <sys/time.h>.
- */
-
-/*
- * Those macros may have been defined in <gnu/types.h>. But we always
- * use the ones here. 
- */
-#undef __NFDBITS
-#define __NFDBITS	(8 * sizeof(unsigned long))
-
-#undef __FD_SETSIZE
-#define __FD_SETSIZE	1024
-
-#undef __FDSET_LONGS
-#define __FDSET_LONGS	(__FD_SETSIZE/__NFDBITS)
-
-#undef __FDELT
-#define	__FDELT(d)	((d) / __NFDBITS)
-
-#undef __FDMASK
-#define	__FDMASK(d)	(1UL << ((d) % __NFDBITS))
-
-typedef struct {
-	unsigned long fds_bits [__FDSET_LONGS];
-} __kernel_fd_set;
-
-/* Type of a signal handler.  */
-typedef void (*__kernel_sighandler_t)(int);
-
-/* Type of a SYSV IPC key.  */
-typedef int __kernel_key_t;
-typedef int __kernel_mqd_t;
-
-#include <asm/posix_types.h>
-
-#endif /* _LINUX_POSIX_TYPES_H */
diff --git a/ANDROID_3.4.5/include/linux/power/bq27x00_battery.h b/ANDROID_3.4.5/include/linux/power/bq27x00_battery.h
deleted file mode 100644
index a857f719..00000000
--- a/ANDROID_3.4.5/include/linux/power/bq27x00_battery.h
+++ /dev/null
@@ -1,19 +0,0 @@
-#ifndef __LINUX_BQ27X00_BATTERY_H__
-#define __LINUX_BQ27X00_BATTERY_H__
-
-/**
- * struct bq27000_plaform_data - Platform data for bq27000 devices
- * @name: Name of the battery. If NULL the driver will fallback to "bq27000".
- * @read: HDQ read callback.
- *	This function should provide access to the HDQ bus the battery is
- *	connected to.
- *	The first parameter is a pointer to the battery device, the second the
- *	register to be read. The return value should either be the content of
- *	the passed register or an error value.
- */
-struct bq27000_platform_data {
-	const char *name;
-	int (*read)(struct device *dev, unsigned int);
-};
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/power/charger-manager.h b/ANDROID_3.4.5/include/linux/power/charger-manager.h
deleted file mode 100644
index 4f75e531..00000000
--- a/ANDROID_3.4.5/include/linux/power/charger-manager.h
+++ /dev/null
@@ -1,147 +0,0 @@
-/*
- * Copyright (C) 2011 Samsung Electronics Co., Ltd.
- * MyungJoo.Ham <myungjoo.ham@samsung.com>
- *
- * Charger Manager.
- * This framework enables to control and multiple chargers and to
- * monitor charging even in the context of suspend-to-RAM with
- * an interface combining the chargers.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-**/
-
-#ifndef _CHARGER_MANAGER_H
-#define _CHARGER_MANAGER_H
-
-#include <linux/power_supply.h>
-
-enum data_source {
-	CM_FUEL_GAUGE,
-	CM_CHARGER_STAT,
-};
-
-enum polling_modes {
-	CM_POLL_DISABLE = 0,
-	CM_POLL_ALWAYS,
-	CM_POLL_EXTERNAL_POWER_ONLY,
-	CM_POLL_CHARGING_ONLY,
-};
-
-/**
- * struct charger_global_desc
- * @rtc_name: the name of RTC used to wake up the system from suspend.
- * @rtc_only_wakeup:
- *	If the system is woken up by waekup-sources other than the RTC or
- *	callbacks, Charger Manager should recognize with
- *	rtc_only_wakeup() returning false.
- *	If the RTC given to CM is the only wakeup reason,
- *	rtc_only_wakeup should return true.
- */
-struct charger_global_desc {
-	char *rtc_name;
-
-	bool (*rtc_only_wakeup)(void);
-};
-
-/**
- * struct charger_desc
- * @psy_name: the name of power-supply-class for charger manager
- * @polling_mode:
- *	Determine which polling mode will be used
- * @fullbatt_uV: voltage in microvolt
- *	If it is not being charged and VBATT >= fullbatt_uV,
- *	it is assumed to be full.
- * @polling_interval_ms: interval in millisecond at which
- *	charger manager will monitor battery health
- * @battery_present:
- *	Specify where information for existance of battery can be obtained
- * @psy_charger_stat: the names of power-supply for chargers
- * @num_charger_regulator: the number of entries in charger_regulators
- * @charger_regulators: array of regulator_bulk_data for chargers
- * @psy_fuel_gauge: the name of power-supply for fuel gauge
- * @temperature_out_of_range:
- *	Determine whether the status is overheat or cold or normal.
- *	return_value > 0: overheat
- *	return_value == 0: normal
- *	return_value < 0: cold
- * @measure_battery_temp:
- *	true: measure battery temperature
- *	false: measure ambient temperature
- */
-struct charger_desc {
-	char *psy_name;
-
-	enum polling_modes polling_mode;
-	unsigned int polling_interval_ms;
-
-	unsigned int fullbatt_uV;
-
-	enum data_source battery_present;
-
-	char **psy_charger_stat;
-
-	int num_charger_regulators;
-	struct regulator_bulk_data *charger_regulators;
-
-	char *psy_fuel_gauge;
-
-	int (*temperature_out_of_range)(int *mC);
-	bool measure_battery_temp;
-};
-
-#define PSY_NAME_MAX	30
-
-/**
- * struct charger_manager
- * @entry: entry for list
- * @dev: device pointer
- * @desc: instance of charger_desc
- * @fuel_gauge: power_supply for fuel gauge
- * @charger_stat: array of power_supply for chargers
- * @charger_enabled: the state of charger
- * @emergency_stop:
- *	When setting true, stop charging
- * @last_temp_mC: the measured temperature in milli-Celsius
- * @psy_name_buf: the name of power-supply-class for charger manager
- * @charger_psy: power_supply for charger manager
- * @status_save_ext_pwr_inserted:
- *	saved status of external power before entering suspend-to-RAM
- * @status_save_batt:
- *	saved status of battery before entering suspend-to-RAM
- */
-struct charger_manager {
-	struct list_head entry;
-	struct device *dev;
-	struct charger_desc *desc;
-
-	struct power_supply *fuel_gauge;
-	struct power_supply **charger_stat;
-
-	bool charger_enabled;
-
-	int emergency_stop;
-	int last_temp_mC;
-
-	char psy_name_buf[PSY_NAME_MAX + 1];
-	struct power_supply charger_psy;
-
-	bool status_save_ext_pwr_inserted;
-	bool status_save_batt;
-};
-
-#ifdef CONFIG_CHARGER_MANAGER
-extern int setup_charger_manager(struct charger_global_desc *gd);
-extern bool cm_suspend_again(void);
-#else
-static void __maybe_unused setup_charger_manager(struct charger_global_desc *gd)
-{ }
-
-static bool __maybe_unused cm_suspend_again(void)
-{
-	return false;
-}
-#endif
-
-#endif /* _CHARGER_MANAGER_H */
diff --git a/ANDROID_3.4.5/include/linux/power/gpio-charger.h b/ANDROID_3.4.5/include/linux/power/gpio-charger.h
deleted file mode 100644
index de1dfe09..00000000
--- a/ANDROID_3.4.5/include/linux/power/gpio-charger.h
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- *  Copyright (C) 2010, Lars-Peter Clausen <lars@metafoo.de>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under  the terms of the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the License, or (at your
- *  option) any later version.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-#ifndef __LINUX_POWER_GPIO_CHARGER_H__
-#define __LINUX_POWER_GPIO_CHARGER_H__
-
-#include <linux/power_supply.h>
-#include <linux/types.h>
-
-/**
- * struct gpio_charger_platform_data - platform_data for gpio_charger devices
- * @name:		Name for the chargers power_supply device
- * @type:		Type of the charger
- * @gpio:		GPIO which is used to indicate the chargers status
- * @gpio_active_low:	Should be set to 1 if the GPIO is active low otherwise 0
- * @supplied_to:	Array of battery names to which this chargers supplies power
- * @num_supplicants:	Number of entries in the supplied_to array
- */
-struct gpio_charger_platform_data {
-	const char *name;
-	enum power_supply_type type;
-
-	int gpio;
-	int gpio_active_low;
-
-	char **supplied_to;
-	size_t num_supplicants;
-};
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/power/isp1704_charger.h b/ANDROID_3.4.5/include/linux/power/isp1704_charger.h
deleted file mode 100644
index 68096a6a..00000000
--- a/ANDROID_3.4.5/include/linux/power/isp1704_charger.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * ISP1704 USB Charger Detection driver
- *
- * Copyright (C) 2011 Nokia Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-
-#ifndef __ISP1704_CHARGER_H
-#define __ISP1704_CHARGER_H
-
-struct isp1704_charger_data {
-	void		(*set_power)(bool on);
-};
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/power/jz4740-battery.h b/ANDROID_3.4.5/include/linux/power/jz4740-battery.h
deleted file mode 100644
index 19c9610c..00000000
--- a/ANDROID_3.4.5/include/linux/power/jz4740-battery.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- *  Copyright (C) 2009, Jiejing Zhang <kzjeef@gmail.com>
- *
- *  This program is free software; you can redistribute	 it and/or modify it
- *  under  the terms of	 the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the	License, or (at your
- *  option) any later version.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-#ifndef __JZ4740_BATTERY_H
-#define __JZ4740_BATTERY_H
-
-struct jz_battery_platform_data {
-	struct power_supply_info info;
-	int gpio_charge;	/* GPIO port of Charger state */
-	int gpio_charge_active_low;
-};
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/power/max17042_battery.h b/ANDROID_3.4.5/include/linux/power/max17042_battery.h
deleted file mode 100644
index e01b167e..00000000
--- a/ANDROID_3.4.5/include/linux/power/max17042_battery.h
+++ /dev/null
@@ -1,196 +0,0 @@
-/*
- * Fuel gauge driver for Maxim 17042 / 8966 / 8997
- *  Note that Maxim 8966 and 8997 are mfd and this is its subdevice.
- *
- * Copyright (C) 2011 Samsung Electronics
- * MyungJoo Ham <myungjoo.ham@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __MAX17042_BATTERY_H_
-#define __MAX17042_BATTERY_H_
-
-#define MAX17042_STATUS_BattAbsent	(1 << 3)
-#define MAX17042_BATTERY_FULL	(100)
-#define MAX17042_DEFAULT_SNS_RESISTOR	(10000)
-
-#define MAX17042_CHARACTERIZATION_DATA_SIZE 48
-
-enum max17042_register {
-	MAX17042_STATUS		= 0x00,
-	MAX17042_VALRT_Th	= 0x01,
-	MAX17042_TALRT_Th	= 0x02,
-	MAX17042_SALRT_Th	= 0x03,
-	MAX17042_AtRate		= 0x04,
-	MAX17042_RepCap		= 0x05,
-	MAX17042_RepSOC		= 0x06,
-	MAX17042_Age		= 0x07,
-	MAX17042_TEMP		= 0x08,
-	MAX17042_VCELL		= 0x09,
-	MAX17042_Current	= 0x0A,
-	MAX17042_AvgCurrent	= 0x0B,
-
-	MAX17042_SOC		= 0x0D,
-	MAX17042_AvSOC		= 0x0E,
-	MAX17042_RemCap		= 0x0F,
-	MAX17042_FullCAP	= 0x10,
-	MAX17042_TTE		= 0x11,
-	MAX17042_V_empty	= 0x12,
-
-	MAX17042_RSLOW		= 0x14,
-
-	MAX17042_AvgTA		= 0x16,
-	MAX17042_Cycles		= 0x17,
-	MAX17042_DesignCap	= 0x18,
-	MAX17042_AvgVCELL	= 0x19,
-	MAX17042_MinMaxTemp	= 0x1A,
-	MAX17042_MinMaxVolt	= 0x1B,
-	MAX17042_MinMaxCurr	= 0x1C,
-	MAX17042_CONFIG		= 0x1D,
-	MAX17042_ICHGTerm	= 0x1E,
-	MAX17042_AvCap		= 0x1F,
-	MAX17042_ManName	= 0x20,
-	MAX17042_DevName	= 0x21,
-
-	MAX17042_FullCAPNom	= 0x23,
-	MAX17042_TempNom	= 0x24,
-	MAX17042_TempLim	= 0x25,
-	MAX17042_TempHot	= 0x26,
-	MAX17042_AIN		= 0x27,
-	MAX17042_LearnCFG	= 0x28,
-	MAX17042_FilterCFG	= 0x29,
-	MAX17042_RelaxCFG	= 0x2A,
-	MAX17042_MiscCFG	= 0x2B,
-	MAX17042_TGAIN		= 0x2C,
-	MAx17042_TOFF		= 0x2D,
-	MAX17042_CGAIN		= 0x2E,
-	MAX17042_COFF		= 0x2F,
-
-	MAX17042_MaskSOC	= 0x32,
-	MAX17042_SOC_empty	= 0x33,
-	MAX17042_T_empty	= 0x34,
-
-	MAX17042_FullCAP0       = 0x35,
-	MAX17042_LAvg_empty	= 0x36,
-	MAX17042_FCTC		= 0x37,
-	MAX17042_RCOMP0		= 0x38,
-	MAX17042_TempCo		= 0x39,
-	MAX17042_EmptyTempCo	= 0x3A,
-	MAX17042_K_empty0	= 0x3B,
-	MAX17042_TaskPeriod	= 0x3C,
-	MAX17042_FSTAT		= 0x3D,
-
-	MAX17042_SHDNTIMER	= 0x3F,
-
-	MAX17042_dQacc		= 0x45,
-	MAX17042_dPacc		= 0x46,
-
-	MAX17042_VFSOC0		= 0x48,
-
-	MAX17042_QH		= 0x4D,
-	MAX17042_QL		= 0x4E,
-
-	MAX17042_VFSOC0Enable	= 0x60,
-	MAX17042_MLOCKReg1	= 0x62,
-	MAX17042_MLOCKReg2	= 0x63,
-
-	MAX17042_MODELChrTbl	= 0x80,
-
-	MAX17042_OCV		= 0xEE,
-
-	MAX17042_OCVInternal	= 0xFB,
-
-	MAX17042_VFSOC		= 0xFF,
-};
-
-/*
- * used for setting a register to a desired value
- * addr : address for a register
- * data : setting value for the register
- */
-struct max17042_reg_data {
-	u8 addr;
-	u16 data;
-};
-
-struct max17042_config_data {
-	/* External current sense resistor value in milli-ohms */
-	u32	cur_sense_val;
-
-	/* A/D measurement */
-	u16	tgain;		/* 0x2C */
-	u16	toff;		/* 0x2D */
-	u16	cgain;		/* 0x2E */
-	u16	coff;		/* 0x2F */
-
-	/* Alert / Status */
-	u16	valrt_thresh;	/* 0x01 */
-	u16	talrt_thresh;	/* 0x02 */
-	u16	soc_alrt_thresh;	/* 0x03 */
-	u16	config;		/* 0x01D */
-	u16	shdntimer;	/* 0x03F */
-
-	/* App data */
-	u16	design_cap;	/* 0x18 */
-	u16	ichgt_term;	/* 0x1E */
-
-	/* MG3 config */
-	u16	at_rate;	/* 0x04 */
-	u16	learn_cfg;	/* 0x28 */
-	u16	filter_cfg;	/* 0x29 */
-	u16	relax_cfg;	/* 0x2A */
-	u16	misc_cfg;	/* 0x2B */
-	u16	masksoc;	/* 0x32 */
-
-	/* MG3 save and restore */
-	u16	fullcap;	/* 0x10 */
-	u16	fullcapnom;	/* 0x23 */
-	u16	socempty;	/* 0x33 */
-	u16	lavg_empty;	/* 0x36 */
-	u16	dqacc;		/* 0x45 */
-	u16	dpacc;		/* 0x46 */
-
-	/* Cell technology from power_supply.h */
-	u16	cell_technology;
-
-	/* Cell Data */
-	u16	vempty;		/* 0x12 */
-	u16	temp_nom;	/* 0x24 */
-	u16	temp_lim;	/* 0x25 */
-	u16	fctc;		/* 0x37 */
-	u16	rcomp0;		/* 0x38 */
-	u16	tcompc0;	/* 0x39 */
-	u16	empty_tempco;	/* 0x3A */
-	u16	kempty0;	/* 0x3B */
-	u16	cell_char_tbl[MAX17042_CHARACTERIZATION_DATA_SIZE];
-} __packed;
-
-struct max17042_platform_data {
-	struct max17042_reg_data *init_data;
-	struct max17042_config_data *config_data;
-	int num_init_data; /* Number of enties in init_data array */
-	bool enable_current_sense;
-	bool enable_por_init; /* Use POR init from Maxim appnote */
-
-	/*
-	 * R_sns in micro-ohms.
-	 * default 10000 (if r_sns = 0) as it is the recommended value by
-	 * the datasheet although it can be changed by board designers.
-	 */
-	unsigned int r_sns;
-};
-
-#endif /* __MAX17042_BATTERY_H_ */
diff --git a/ANDROID_3.4.5/include/linux/power/max8903_charger.h b/ANDROID_3.4.5/include/linux/power/max8903_charger.h
deleted file mode 100644
index 24f51db8..00000000
--- a/ANDROID_3.4.5/include/linux/power/max8903_charger.h
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- * max8903_charger.h - Maxim 8903 USB/Adapter Charger Driver
- *
- * Copyright (C) 2011 Samsung Electronics
- * MyungJoo Ham <myungjoo.ham@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- */
-
-#ifndef __MAX8903_CHARGER_H__
-#define __MAX8903_CHARGER_H__
-
-struct max8903_pdata {
-	/*
-	 * GPIOs
-	 * cen, chg, flt, and usus are optional.
-	 * dok, dcm, and uok are not optional depending on the status of
-	 * dc_valid and usb_valid.
-	 */
-	int cen;	/* Charger Enable input */
-	int dok;	/* DC(Adapter) Power OK output */
-	int uok;	/* USB Power OK output */
-	int chg;	/* Charger status output */
-	int flt;	/* Fault output */
-	int dcm;	/* Current-Limit Mode input (1: DC, 2: USB) */
-	int usus;	/* USB Suspend Input (1: suspended) */
-
-	/*
-	 * DC(Adapter/TA) is wired
-	 * When dc_valid is true,
-	 *	dok and dcm should be valid.
-	 *
-	 * At least one of dc_valid or usb_valid should be true.
-	 */
-	bool dc_valid;
-	/*
-	 * USB is wired
-	 * When usb_valid is true,
-	 *	uok should be valid.
-	 */
-	bool usb_valid;
-};
-
-#endif /* __MAX8903_CHARGER_H__ */
diff --git a/ANDROID_3.4.5/include/linux/power/sbs-battery.h b/ANDROID_3.4.5/include/linux/power/sbs-battery.h
deleted file mode 100644
index 2b0a9d9f..00000000
--- a/ANDROID_3.4.5/include/linux/power/sbs-battery.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * Gas Gauge driver for SBS Compliant Gas Gauges
- *
- * Copyright (c) 2010, NVIDIA Corporation.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
- */
-
-#ifndef __LINUX_POWER_SBS_BATTERY_H_
-#define __LINUX_POWER_SBS_BATTERY_H_
-
-#include <linux/power_supply.h>
-#include <linux/types.h>
-
-/**
- * struct sbs_platform_data - platform data for sbs devices
- * @battery_detect:		GPIO which is used to detect battery presence
- * @battery_detect_present:	gpio state when battery is present (0 / 1)
- * @i2c_retry_count:		# of times to retry on i2c IO failure
- * @poll_retry_count:		# of times to retry looking for new status after
- *				external change notification
- */
-struct sbs_platform_data {
-	int battery_detect;
-	int battery_detect_present;
-	int i2c_retry_count;
-	int poll_retry_count;
-};
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/power/smb347-charger.h b/ANDROID_3.4.5/include/linux/power/smb347-charger.h
deleted file mode 100644
index e9aab944..00000000
--- a/ANDROID_3.4.5/include/linux/power/smb347-charger.h
+++ /dev/null
@@ -1,123 +0,0 @@
-/*
- * Summit Microelectronics SMB347 Battery Charger Driver
- *
- * Copyright (C) 2011, Intel Corporation
- *
- * Authors: Bruce E. Robertson <bruce.e.robertson@intel.com>
- *          Mika Westerberg <mika.westerberg@linux.intel.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef SMB347_CHARGER_H
-#define SMB347_CHARGER_H
-
-#include <linux/types.h>
-#include <linux/power_supply.h>
-
-enum {
-	/* use the default compensation method */
-	SMB347_SOFT_TEMP_COMPENSATE_DEFAULT = -1,
-
-	SMB347_SOFT_TEMP_COMPENSATE_NONE,
-	SMB347_SOFT_TEMP_COMPENSATE_CURRENT,
-	SMB347_SOFT_TEMP_COMPENSATE_VOLTAGE,
-};
-
-/* Use default factory programmed value for hard/soft temperature limit */
-#define SMB347_TEMP_USE_DEFAULT		-273
-
-/*
- * Charging enable can be controlled by software (via i2c) by
- * smb347-charger driver or by EN pin (active low/high).
- */
-enum smb347_chg_enable {
-	SMB347_CHG_ENABLE_SW,
-	SMB347_CHG_ENABLE_PIN_ACTIVE_LOW,
-	SMB347_CHG_ENABLE_PIN_ACTIVE_HIGH,
-};
-
-/**
- * struct smb347_charger_platform_data - platform data for SMB347 charger
- * @battery_info: Information about the battery
- * @max_charge_current: maximum current (in uA) the battery can be charged
- * @max_charge_voltage: maximum voltage (in uV) the battery can be charged
- * @pre_charge_current: current (in uA) to use in pre-charging phase
- * @termination_current: current (in uA) used to determine when the
- *			 charging cycle terminates
- * @pre_to_fast_voltage: voltage (in uV) treshold used for transitioning to
- *			 pre-charge to fast charge mode
- * @mains_current_limit: maximum input current drawn from AC/DC input (in uA)
- * @usb_hc_current_limit: maximum input high current (in uA) drawn from USB
- *			  input
- * @chip_temp_threshold: die temperature where device starts limiting charge
- *			 current [%100 - %130] (in degree C)
- * @soft_cold_temp_limit: soft cold temperature limit [%0 - %15] (in degree C),
- *			  granularity is 5 deg C.
- * @soft_hot_temp_limit: soft hot temperature limit [%40 - %55] (in degree  C),
- *			 granularity is 5 deg C.
- * @hard_cold_temp_limit: hard cold temperature limit [%-5 - %10] (in degree C),
- *			  granularity is 5 deg C.
- * @hard_hot_temp_limit: hard hot temperature limit [%50 - %65] (in degree C),
- *			 granularity is 5 deg C.
- * @suspend_on_hard_temp_limit: suspend charging when hard limit is hit
- * @soft_temp_limit_compensation: compensation method when soft temperature
- *				  limit is hit
- * @charge_current_compensation: current (in uA) for charging compensation
- *				 current when temperature hits soft limits
- * @use_mains: AC/DC input can be used
- * @use_usb: USB input can be used
- * @use_usb_otg: USB OTG output can be used (not implemented yet)
- * @irq_gpio: GPIO number used for interrupts (%-1 if not used)
- * @enable_control: how charging enable/disable is controlled
- *		    (driver/pin controls)
- *
- * @use_main, @use_usb, and @use_usb_otg are means to enable/disable
- * hardware support for these. This is useful when we want to have for
- * example OTG charging controlled via OTG transceiver driver and not by
- * the SMB347 hardware.
- *
- * Hard and soft temperature limit values are given as described in the
- * device data sheet and assuming NTC beta value is %3750. Even if this is
- * not the case, these values should be used. They can be mapped to the
- * corresponding NTC beta values with the help of table %2 in the data
- * sheet. So for example if NTC beta is %3375 and we want to program hard
- * hot limit to be %53 deg C, @hard_hot_temp_limit should be set to %50.
- *
- * If zero value is given in any of the current and voltage values, the
- * factory programmed default will be used. For soft/hard temperature
- * values, pass in %SMB347_TEMP_USE_DEFAULT instead.
- */
-struct smb347_charger_platform_data {
-	struct power_supply_info battery_info;
-	unsigned int	max_charge_current;
-	unsigned int	max_charge_voltage;
-	unsigned int	pre_charge_current;
-	unsigned int	termination_current;
-	unsigned int	pre_to_fast_voltage;
-	unsigned int	mains_current_limit;
-	unsigned int	usb_hc_current_limit;
-	unsigned int	chip_temp_threshold;
-	int		soft_cold_temp_limit;
-	int		soft_hot_temp_limit;
-	int		hard_cold_temp_limit;
-	int		hard_hot_temp_limit;
-	bool		suspend_on_hard_temp_limit;
-	unsigned int	soft_temp_limit_compensation;
-	unsigned int	charge_current_compensation;
-	bool		use_mains;
-	bool		use_usb;
-	bool		use_usb_otg;
-	bool		disable_automatic_recharge;
-	int		irq_gpio;
-	bool		disable_stat_interrupts;
-	enum smb347_chg_enable enable_control;
-	bool		usb_mode_pin_ctrl;
-	char		**supplied_to;
-	size_t		num_supplicants;
-	int		en_gpio;
-};
-
-#endif /* SMB347_CHARGER_H */
diff --git a/ANDROID_3.4.5/include/linux/power/wmt_battery.h b/ANDROID_3.4.5/include/linux/power/wmt_battery.h
deleted file mode 100755
index e721fa5e..00000000
--- a/ANDROID_3.4.5/include/linux/power/wmt_battery.h
+++ /dev/null
@@ -1,111 +0,0 @@
-/*
- * Copyright (C) 2013  WonderMedia Technologies, Inc.  
- *
- * This program is free software; you can redistribute it and/or modify it
- * under  the terms of the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the License, or (at your
- * option) any later version.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __LINUX_POWER_WMT_BATTERY_H__
-#define __LINUX_POWER_WMT_BATTERY_H__
-
-static inline int prefixcmp(const char *str, const char *prefix)
-{
-	for (; ; str++, prefix++)
-		if (!*prefix)
-			return 0;
-		else if (*str != *prefix)
-			return (unsigned char)*prefix - (unsigned char)*str;
-}
-
-#include <linux/power_supply.h>
-#include <mach/hardware.h>
-
-enum cable_type {
-	CABLE_TYPE_DC,
-	CABLE_TYPE_USB,
-	CABLE_TYPE_UNKNOWN,
-};
-
-enum {
-	CURRENT_SWITCH_DYNAMIC,
-	CURRENT_SWITCH_SLEEP,
-};
-
-enum {
-	PC_CONNECTED_NOT_CHARGING,
-	PC_CONNECTED_CHARGING,
-};
-
-#define USB_BASE_ADD	(0xD8007800+WMT_MMAP_OFFSET)
-
-static inline int wmt_is_otg_plugin(void)
-{
-	return !(REG8_VAL(USB_BASE_ADD + 0x7F2) & BIT0);
-}
-
-static inline int wmt_is_dc_plugin(void)
-{
-	return (REG8_VAL(PM_CTRL_BASE_ADDR + 0x005d) & 0x01);
-}
-
-static inline void wmt_dcdet_irq_enable(void)
-{
-	uint32_t val;
-	// dcdet wakeup interrupt
-	PMTC_VAL |= BIT27;
-	val = PMWTC_VAL;
-	val &= ~(0xf << 12);
-	val |= 0x04 << 12;
-	PMWTC_VAL = val;
-	PMWE_VAL |= BIT27;
-
-	// dcdet interrupt
-	/* Register dcdet interrupt, edge trigger */
-	PMCIE_VAL |= BIT27;
-	WK_TRG_EN_VAL |= BIT27;
-	pmc_enable_wakeup_isr(WKS_DCDET, 4);
-}
-
-static inline void wmt_dcdet_irq_disable(void)
-{
-	pmc_disable_wakeup_isr(WKS_DCDET);
-}
-
-static inline int charger_get_status(void)
-{
-	struct power_supply *charger;
-	union power_supply_propval val;
-	
-	charger = power_supply_get_by_name("ac");
-	if (!charger) {
-		pr_err("get ac power supply failed\n");
-		return -ENODEV;
-	}
-
-	charger->get_property(charger, POWER_SUPPLY_PROP_STATUS, &val);
-	return val.intval;
-}
-
-static inline int charger_is_full(void)
-{
-	return charger_get_status() == POWER_SUPPLY_STATUS_FULL;
-}
-
-static inline int wmt_charger_is_dc_plugin(void)
-{
-	return power_supply_is_system_supplied();
-}
-
-extern int  wmt_is_pc_connected(void);
-extern void wmt_do_pc_connected(void);
-
-extern int parse_charger_led(void);
-extern void led_power_enable(int enable);
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/power_supply.h b/ANDROID_3.4.5/include/linux/power_supply.h
deleted file mode 100644
index e1f54479..00000000
--- a/ANDROID_3.4.5/include/linux/power_supply.h
+++ /dev/null
@@ -1,279 +0,0 @@
-/*
- *  Universal power supply monitor class
- *
- *  Copyright © 2007  Anton Vorontsov <cbou@mail.ru>
- *  Copyright © 2004  Szabolcs Gyurko
- *  Copyright © 2003  Ian Molton <spyro@f2s.com>
- *
- *  Modified: 2004, Oct     Szabolcs Gyurko
- *
- *  You may use this code as per GPL version 2
- */
-
-#ifndef __LINUX_POWER_SUPPLY_H__
-#define __LINUX_POWER_SUPPLY_H__
-
-#include <linux/workqueue.h>
-#include <linux/leds.h>
-
-struct device;
-
-/*
- * All voltages, currents, charges, energies, time and temperatures in uV,
- * µA, µAh, µWh, seconds and tenths of degree Celsius unless otherwise
- * stated. It's driver's job to convert its raw values to units in which
- * this class operates.
- */
-
-/*
- * For systems where the charger determines the maximum battery capacity
- * the min and max fields should be used to present these values to user
- * space. Unused/unknown fields will not appear in sysfs.
- */
-
-enum {
-	POWER_SUPPLY_STATUS_UNKNOWN = 0,
-	POWER_SUPPLY_STATUS_CHARGING,
-	POWER_SUPPLY_STATUS_DISCHARGING,
-	POWER_SUPPLY_STATUS_NOT_CHARGING,
-	POWER_SUPPLY_STATUS_FULL,
-};
-
-enum {
-	POWER_SUPPLY_CHARGE_TYPE_UNKNOWN = 0,
-	POWER_SUPPLY_CHARGE_TYPE_NONE,
-	POWER_SUPPLY_CHARGE_TYPE_TRICKLE,
-	POWER_SUPPLY_CHARGE_TYPE_FAST,
-};
-
-enum {
-	POWER_SUPPLY_HEALTH_UNKNOWN = 0,
-	POWER_SUPPLY_HEALTH_GOOD,
-	POWER_SUPPLY_HEALTH_OVERHEAT,
-	POWER_SUPPLY_HEALTH_DEAD,
-	POWER_SUPPLY_HEALTH_OVERVOLTAGE,
-	POWER_SUPPLY_HEALTH_UNSPEC_FAILURE,
-	POWER_SUPPLY_HEALTH_COLD,
-};
-
-enum {
-	POWER_SUPPLY_TECHNOLOGY_UNKNOWN = 0,
-	POWER_SUPPLY_TECHNOLOGY_NiMH,
-	POWER_SUPPLY_TECHNOLOGY_LION,
-	POWER_SUPPLY_TECHNOLOGY_LIPO,
-	POWER_SUPPLY_TECHNOLOGY_LiFe,
-	POWER_SUPPLY_TECHNOLOGY_NiCd,
-	POWER_SUPPLY_TECHNOLOGY_LiMn,
-};
-
-enum {
-	POWER_SUPPLY_CAPACITY_LEVEL_UNKNOWN = 0,
-	POWER_SUPPLY_CAPACITY_LEVEL_CRITICAL,
-	POWER_SUPPLY_CAPACITY_LEVEL_LOW,
-	POWER_SUPPLY_CAPACITY_LEVEL_NORMAL,
-	POWER_SUPPLY_CAPACITY_LEVEL_HIGH,
-	POWER_SUPPLY_CAPACITY_LEVEL_FULL,
-};
-
-enum {
-	POWER_SUPPLY_SCOPE_UNKNOWN = 0,
-	POWER_SUPPLY_SCOPE_SYSTEM,
-	POWER_SUPPLY_SCOPE_DEVICE,
-};
-
-enum power_supply_property {
-	/* Properties of type `int' */
-	POWER_SUPPLY_PROP_STATUS = 0,
-	POWER_SUPPLY_PROP_CHARGE_TYPE,
-	POWER_SUPPLY_PROP_HEALTH,
-	POWER_SUPPLY_PROP_PRESENT,
-	POWER_SUPPLY_PROP_ONLINE,
-	POWER_SUPPLY_PROP_TECHNOLOGY,
-	POWER_SUPPLY_PROP_CYCLE_COUNT,
-	POWER_SUPPLY_PROP_VOLTAGE_MAX,
-	POWER_SUPPLY_PROP_VOLTAGE_MIN,
-	POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN,
-	POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN,
-	POWER_SUPPLY_PROP_VOLTAGE_NOW,
-	POWER_SUPPLY_PROP_VOLTAGE_AVG,
-	POWER_SUPPLY_PROP_CURRENT_MAX,
-	POWER_SUPPLY_PROP_CURRENT_NOW,
-	POWER_SUPPLY_PROP_CURRENT_AVG,
-	POWER_SUPPLY_PROP_POWER_NOW,
-	POWER_SUPPLY_PROP_POWER_AVG,
-	POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
-	POWER_SUPPLY_PROP_CHARGE_EMPTY_DESIGN,
-	POWER_SUPPLY_PROP_CHARGE_FULL,
-	POWER_SUPPLY_PROP_CHARGE_EMPTY,
-	POWER_SUPPLY_PROP_CHARGE_NOW,
-	POWER_SUPPLY_PROP_CHARGE_AVG,
-	POWER_SUPPLY_PROP_CHARGE_COUNTER,
-	POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN,
-	POWER_SUPPLY_PROP_ENERGY_EMPTY_DESIGN,
-	POWER_SUPPLY_PROP_ENERGY_FULL,
-	POWER_SUPPLY_PROP_ENERGY_EMPTY,
-	POWER_SUPPLY_PROP_ENERGY_NOW,
-	POWER_SUPPLY_PROP_ENERGY_AVG,
-	POWER_SUPPLY_PROP_CAPACITY, /* in percents! */
-	POWER_SUPPLY_PROP_CAPACITY_LEVEL,
-	POWER_SUPPLY_PROP_TEMP,
-	POWER_SUPPLY_PROP_TEMP_AMBIENT,
-	POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW,
-	POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG,
-	POWER_SUPPLY_PROP_TIME_TO_FULL_NOW,
-	POWER_SUPPLY_PROP_TIME_TO_FULL_AVG,
-	POWER_SUPPLY_PROP_TYPE, /* use power_supply.type instead */
-	POWER_SUPPLY_PROP_SCOPE,
-	/* Local extensions */
-	POWER_SUPPLY_PROP_USB_HC,
-	POWER_SUPPLY_PROP_USB_OTG,
-	POWER_SUPPLY_PROP_CHARGE_ENABLED,
-	/* Properties of type `const char *' */
-	POWER_SUPPLY_PROP_MODEL_NAME,
-	POWER_SUPPLY_PROP_MANUFACTURER,
-	POWER_SUPPLY_PROP_SERIAL_NUMBER,
-};
-
-enum power_supply_type {
-	POWER_SUPPLY_TYPE_UNKNOWN = 0,
-	POWER_SUPPLY_TYPE_BATTERY,
-	POWER_SUPPLY_TYPE_UPS,
-	POWER_SUPPLY_TYPE_MAINS,
-	POWER_SUPPLY_TYPE_USB,		/* Standard Downstream Port */
-	POWER_SUPPLY_TYPE_USB_DCP,	/* Dedicated Charging Port */
-	POWER_SUPPLY_TYPE_USB_CDP,	/* Charging Downstream Port */
-	POWER_SUPPLY_TYPE_USB_ACA,	/* Accessory Charger Adapters */
-};
-
-union power_supply_propval {
-	int intval;
-	const char *strval;
-};
-
-struct power_supply {
-	const char *name;
-	enum power_supply_type type;
-	enum power_supply_property *properties;
-	size_t num_properties;
-
-	char **supplied_to;
-	size_t num_supplicants;
-
-	int (*get_property)(struct power_supply *psy,
-			    enum power_supply_property psp,
-			    union power_supply_propval *val);
-	int (*set_property)(struct power_supply *psy,
-			    enum power_supply_property psp,
-			    const union power_supply_propval *val);
-	int (*property_is_writeable)(struct power_supply *psy,
-				     enum power_supply_property psp);
-	void (*external_power_changed)(struct power_supply *psy);
-	void (*set_charged)(struct power_supply *psy);
-
-	/* For APM emulation, think legacy userspace. */
-	int use_for_apm;
-
-	/* private */
-	struct device *dev;
-	struct work_struct changed_work;
-	spinlock_t changed_lock;
-	bool changed;
-
-#ifdef CONFIG_LEDS_TRIGGERS
-	struct led_trigger *charging_full_trig;
-	char *charging_full_trig_name;
-	struct led_trigger *charging_trig;
-	char *charging_trig_name;
-	struct led_trigger *full_trig;
-	char *full_trig_name;
-	struct led_trigger *online_trig;
-	char *online_trig_name;
-	struct led_trigger *charging_blink_full_solid_trig;
-	char *charging_blink_full_solid_trig_name;
-#endif
-};
-
-/*
- * This is recommended structure to specify static power supply parameters.
- * Generic one, parametrizable for different power supplies. Power supply
- * class itself does not use it, but that's what implementing most platform
- * drivers, should try reuse for consistency.
- */
-
-struct power_supply_info {
-	const char *name;
-	int technology;
-	int voltage_max_design;
-	int voltage_min_design;
-	int charge_full_design;
-	int charge_empty_design;
-	int energy_full_design;
-	int energy_empty_design;
-	int use_for_apm;
-};
-
-extern struct power_supply *power_supply_get_by_name(char *name);
-extern void power_supply_changed(struct power_supply *psy);
-extern int power_supply_am_i_supplied(struct power_supply *psy);
-extern int power_supply_set_battery_charged(struct power_supply *psy);
-
-#if defined(CONFIG_POWER_SUPPLY) || defined(CONFIG_POWER_SUPPLY_MODULE)
-extern int power_supply_is_system_supplied(void);
-#else
-static inline int power_supply_is_system_supplied(void) { return -ENOSYS; }
-#endif
-
-extern int power_supply_register(struct device *parent,
-				 struct power_supply *psy);
-extern void power_supply_unregister(struct power_supply *psy);
-extern int power_supply_powers(struct power_supply *psy, struct device *dev);
-
-/* For APM emulation, think legacy userspace. */
-extern struct class *power_supply_class;
-
-static inline bool power_supply_is_amp_property(enum power_supply_property psp)
-{
-	switch (psp) {
-	case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN:
-	case POWER_SUPPLY_PROP_CHARGE_EMPTY_DESIGN:
-	case POWER_SUPPLY_PROP_CHARGE_FULL:
-	case POWER_SUPPLY_PROP_CHARGE_EMPTY:
-	case POWER_SUPPLY_PROP_CHARGE_NOW:
-	case POWER_SUPPLY_PROP_CHARGE_AVG:
-	case POWER_SUPPLY_PROP_CHARGE_COUNTER:
-	case POWER_SUPPLY_PROP_CURRENT_MAX:
-	case POWER_SUPPLY_PROP_CURRENT_NOW:
-	case POWER_SUPPLY_PROP_CURRENT_AVG:
-		return 1;
-	default:
-		break;
-	}
-
-	return 0;
-}
-
-static inline bool power_supply_is_watt_property(enum power_supply_property psp)
-{
-	switch (psp) {
-	case POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN:
-	case POWER_SUPPLY_PROP_ENERGY_EMPTY_DESIGN:
-	case POWER_SUPPLY_PROP_ENERGY_FULL:
-	case POWER_SUPPLY_PROP_ENERGY_EMPTY:
-	case POWER_SUPPLY_PROP_ENERGY_NOW:
-	case POWER_SUPPLY_PROP_ENERGY_AVG:
-	case POWER_SUPPLY_PROP_VOLTAGE_MAX:
-	case POWER_SUPPLY_PROP_VOLTAGE_MIN:
-	case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN:
-	case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN:
-	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
-	case POWER_SUPPLY_PROP_VOLTAGE_AVG:
-	case POWER_SUPPLY_PROP_POWER_NOW:
-		return 1;
-	default:
-		break;
-	}
-
-	return 0;
-}
-
-#endif /* __LINUX_POWER_SUPPLY_H__ */
diff --git a/ANDROID_3.4.5/include/linux/ppdev.h b/ANDROID_3.4.5/include/linux/ppdev.h
deleted file mode 100644
index dc18c5d2..00000000
--- a/ANDROID_3.4.5/include/linux/ppdev.h
+++ /dev/null
@@ -1,99 +0,0 @@
-/*
- * linux/include/linux/ppdev.h
- *
- * User-space parallel port device driver (header file).
- *
- * Copyright (C) 1998-9 Tim Waugh <tim@cyberelk.demon.co.uk>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- *
- * Added PPGETTIME/PPSETTIME, Fred Barnes, 1999
- * Added PPGETMODES/PPGETMODE/PPGETPHASE, Fred Barnes <frmb2@ukc.ac.uk>, 03/01/2001
- */
-
-#define PP_IOCTL	'p'
-
-/* Set mode for read/write (e.g. IEEE1284_MODE_EPP) */
-#define PPSETMODE	_IOW(PP_IOCTL, 0x80, int)
-
-/* Read status */
-#define PPRSTATUS	_IOR(PP_IOCTL, 0x81, unsigned char)
-#define PPWSTATUS	OBSOLETE__IOW(PP_IOCTL, 0x82, unsigned char)
-
-/* Read/write control */
-#define PPRCONTROL	_IOR(PP_IOCTL, 0x83, unsigned char)
-#define PPWCONTROL	_IOW(PP_IOCTL, 0x84, unsigned char)
-
-struct ppdev_frob_struct {
-	unsigned char mask;
-	unsigned char val;
-};
-#define PPFCONTROL      _IOW(PP_IOCTL, 0x8e, struct ppdev_frob_struct)
-
-/* Read/write data */
-#define PPRDATA		_IOR(PP_IOCTL, 0x85, unsigned char)
-#define PPWDATA		_IOW(PP_IOCTL, 0x86, unsigned char)
-
-/* Read/write econtrol (not used) */
-#define PPRECONTROL	OBSOLETE__IOR(PP_IOCTL, 0x87, unsigned char)
-#define PPWECONTROL	OBSOLETE__IOW(PP_IOCTL, 0x88, unsigned char)
-
-/* Read/write FIFO (not used) */
-#define PPRFIFO		OBSOLETE__IOR(PP_IOCTL, 0x89, unsigned char)
-#define PPWFIFO		OBSOLETE__IOW(PP_IOCTL, 0x8a, unsigned char)
-
-/* Claim the port to start using it */
-#define PPCLAIM		_IO(PP_IOCTL, 0x8b)
-
-/* Release the port when you aren't using it */
-#define PPRELEASE	_IO(PP_IOCTL, 0x8c)
-
-/* Yield the port (release it if another driver is waiting,
- * then reclaim) */
-#define PPYIELD		_IO(PP_IOCTL, 0x8d)
-
-/* Register device exclusively (must be before PPCLAIM). */
-#define PPEXCL		_IO(PP_IOCTL, 0x8f)
-
-/* Data line direction: non-zero for input mode. */
-#define PPDATADIR	_IOW(PP_IOCTL, 0x90, int)
-
-/* Negotiate a particular IEEE 1284 mode. */
-#define PPNEGOT		_IOW(PP_IOCTL, 0x91, int)
-
-/* Set control lines when an interrupt occurs. */
-#define PPWCTLONIRQ	_IOW(PP_IOCTL, 0x92, unsigned char)
-
-/* Clear (and return) interrupt count. */
-#define PPCLRIRQ	_IOR(PP_IOCTL, 0x93, int)
-
-/* Set the IEEE 1284 phase that we're in (e.g. IEEE1284_PH_FWD_IDLE) */
-#define PPSETPHASE	_IOW(PP_IOCTL, 0x94, int)
-
-/* Set and get port timeout (struct timeval's) */
-#define PPGETTIME	_IOR(PP_IOCTL, 0x95, struct timeval)
-#define PPSETTIME	_IOW(PP_IOCTL, 0x96, struct timeval)
-
-/* Get available modes (what the hardware can do) */
-#define PPGETMODES	_IOR(PP_IOCTL, 0x97, unsigned int)
-
-/* Get the current mode and phaze */
-#define PPGETMODE	_IOR(PP_IOCTL, 0x98, int)
-#define PPGETPHASE	_IOR(PP_IOCTL, 0x99, int)
-
-/* get/set flags */
-#define PPGETFLAGS	_IOR(PP_IOCTL, 0x9a, int)
-#define PPSETFLAGS	_IOW(PP_IOCTL, 0x9b, int)
-
-/* flags visible to the world */
-#define PP_FASTWRITE	(1<<2)
-#define PP_FASTREAD	(1<<3)
-#define PP_W91284PIC	(1<<4)
-
-/* only masks user-visible flags */
-#define PP_FLAGMASK	(PP_FASTWRITE | PP_FASTREAD | PP_W91284PIC)
-
-
diff --git a/ANDROID_3.4.5/include/linux/ppp-comp.h b/ANDROID_3.4.5/include/linux/ppp-comp.h
deleted file mode 100644
index e53ff659..00000000
--- a/ANDROID_3.4.5/include/linux/ppp-comp.h
+++ /dev/null
@@ -1,184 +0,0 @@
-/*
- * ppp-comp.h - Definitions for doing PPP packet compression.
- *
- * Copyright 1994-1998 Paul Mackerras.
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  version 2 as published by the Free Software Foundation.
- */
-#ifndef _NET_PPP_COMP_H
-#define _NET_PPP_COMP_H
-
-struct module;
-
-/*
- * The following symbols control whether we include code for
- * various compression methods.
- */
-
-#ifndef DO_BSD_COMPRESS
-#define DO_BSD_COMPRESS	1	/* by default, include BSD-Compress */
-#endif
-#ifndef DO_DEFLATE
-#define DO_DEFLATE	1	/* by default, include Deflate */
-#endif
-#define DO_PREDICTOR_1	0
-#define DO_PREDICTOR_2	0
-
-/*
- * Structure giving methods for compression/decompression.
- */
-
-struct compressor {
-	int	compress_proto;	/* CCP compression protocol number */
-
-	/* Allocate space for a compressor (transmit side) */
-	void	*(*comp_alloc) (unsigned char *options, int opt_len);
-
-	/* Free space used by a compressor */
-	void	(*comp_free) (void *state);
-
-	/* Initialize a compressor */
-	int	(*comp_init) (void *state, unsigned char *options,
-			      int opt_len, int unit, int opthdr, int debug);
-
-	/* Reset a compressor */
-	void	(*comp_reset) (void *state);
-
-	/* Compress a packet */
-	int     (*compress) (void *state, unsigned char *rptr,
-			      unsigned char *obuf, int isize, int osize);
-
-	/* Return compression statistics */
-	void	(*comp_stat) (void *state, struct compstat *stats);
-
-	/* Allocate space for a decompressor (receive side) */
-	void	*(*decomp_alloc) (unsigned char *options, int opt_len);
-
-	/* Free space used by a decompressor */
-	void	(*decomp_free) (void *state);
-
-	/* Initialize a decompressor */
-	int	(*decomp_init) (void *state, unsigned char *options,
-				int opt_len, int unit, int opthdr, int mru,
-				int debug);
-
-	/* Reset a decompressor */
-	void	(*decomp_reset) (void *state);
-
-	/* Decompress a packet. */
-	int	(*decompress) (void *state, unsigned char *ibuf, int isize,
-				unsigned char *obuf, int osize);
-
-	/* Update state for an incompressible packet received */
-	void	(*incomp) (void *state, unsigned char *ibuf, int icnt);
-
-	/* Return decompression statistics */
-	void	(*decomp_stat) (void *state, struct compstat *stats);
-
-	/* Used in locking compressor modules */
-	struct module *owner;
-	/* Extra skb space needed by the compressor algorithm */
-	unsigned int comp_extra;
-};
-
-/*
- * The return value from decompress routine is the length of the
- * decompressed packet if successful, otherwise DECOMP_ERROR
- * or DECOMP_FATALERROR if an error occurred.
- * 
- * We need to make this distinction so that we can disable certain
- * useful functionality, namely sending a CCP reset-request as a result
- * of an error detected after decompression.  This is to avoid infringing
- * a patent held by Motorola.
- * Don't you just lurve software patents.
- */
-
-#define DECOMP_ERROR		-1	/* error detected before decomp. */
-#define DECOMP_FATALERROR	-2	/* error detected after decomp. */
-
-/*
- * CCP codes.
- */
-
-#define CCP_CONFREQ	1
-#define CCP_CONFACK	2
-#define CCP_TERMREQ	5
-#define CCP_TERMACK	6
-#define CCP_RESETREQ	14
-#define CCP_RESETACK	15
-
-/*
- * Max # bytes for a CCP option
- */
-
-#define CCP_MAX_OPTION_LENGTH	32
-
-/*
- * Parts of a CCP packet.
- */
-
-#define CCP_CODE(dp)		((dp)[0])
-#define CCP_ID(dp)		((dp)[1])
-#define CCP_LENGTH(dp)		(((dp)[2] << 8) + (dp)[3])
-#define CCP_HDRLEN		4
-
-#define CCP_OPT_CODE(dp)	((dp)[0])
-#define CCP_OPT_LENGTH(dp)	((dp)[1])
-#define CCP_OPT_MINLEN		2
-
-/*
- * Definitions for BSD-Compress.
- */
-
-#define CI_BSD_COMPRESS		21	/* config. option for BSD-Compress */
-#define CILEN_BSD_COMPRESS	3	/* length of config. option */
-
-/* Macros for handling the 3rd byte of the BSD-Compress config option. */
-#define BSD_NBITS(x)		((x) & 0x1F)	/* number of bits requested */
-#define BSD_VERSION(x)		((x) >> 5)	/* version of option format */
-#define BSD_CURRENT_VERSION	1		/* current version number */
-#define BSD_MAKE_OPT(v, n)	(((v) << 5) | (n))
-
-#define BSD_MIN_BITS		9	/* smallest code size supported */
-#define BSD_MAX_BITS		15	/* largest code size supported */
-
-/*
- * Definitions for Deflate.
- */
-
-#define CI_DEFLATE		26	/* config option for Deflate */
-#define CI_DEFLATE_DRAFT	24	/* value used in original draft RFC */
-#define CILEN_DEFLATE		4	/* length of its config option */
-
-#define DEFLATE_MIN_SIZE	9
-#define DEFLATE_MAX_SIZE	15
-#define DEFLATE_METHOD_VAL	8
-#define DEFLATE_SIZE(x)		(((x) >> 4) + 8)
-#define DEFLATE_METHOD(x)	((x) & 0x0F)
-#define DEFLATE_MAKE_OPT(w)	((((w) - 8) << 4) + DEFLATE_METHOD_VAL)
-#define DEFLATE_CHK_SEQUENCE	0
-
-/*
- * Definitions for MPPE.
- */
-
-#define CI_MPPE                18      /* config option for MPPE */
-#define CILEN_MPPE              6      /* length of config option */
-
-/*
- * Definitions for other, as yet unsupported, compression methods.
- */
-
-#define CI_PREDICTOR_1		1	/* config option for Predictor-1 */
-#define CILEN_PREDICTOR_1	2	/* length of its config option */
-#define CI_PREDICTOR_2		2	/* config option for Predictor-2 */
-#define CILEN_PREDICTOR_2	2	/* length of its config option */
-
-#ifdef __KERNEL__
-extern int ppp_register_compressor(struct compressor *);
-extern void ppp_unregister_compressor(struct compressor *);
-#endif /* __KERNEL__ */
-
-#endif /* _NET_PPP_COMP_H */
diff --git a/ANDROID_3.4.5/include/linux/ppp-ioctl.h b/ANDROID_3.4.5/include/linux/ppp-ioctl.h
deleted file mode 100644
index 2d9a8859..00000000
--- a/ANDROID_3.4.5/include/linux/ppp-ioctl.h
+++ /dev/null
@@ -1,119 +0,0 @@
-/*
- * ppp-ioctl.h - PPP ioctl definitions.
- *
- * Copyright 1999-2002 Paul Mackerras.
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  version 2 as published by the Free Software Foundation.
- */
-#ifndef _PPP_IOCTL_H
-#define _PPP_IOCTL_H
-
-#include <linux/types.h>
-#include <linux/compiler.h>
-
-/*
- * Bit definitions for flags argument to PPPIOCGFLAGS/PPPIOCSFLAGS.
- */
-#define SC_COMP_PROT	0x00000001	/* protocol compression (output) */
-#define SC_COMP_AC	0x00000002	/* header compression (output) */
-#define	SC_COMP_TCP	0x00000004	/* TCP (VJ) compression (output) */
-#define SC_NO_TCP_CCID	0x00000008	/* disable VJ connection-id comp. */
-#define SC_REJ_COMP_AC	0x00000010	/* reject adrs/ctrl comp. on input */
-#define SC_REJ_COMP_TCP	0x00000020	/* reject TCP (VJ) comp. on input */
-#define SC_CCP_OPEN	0x00000040	/* Look at CCP packets */
-#define SC_CCP_UP	0x00000080	/* May send/recv compressed packets */
-#define SC_ENABLE_IP	0x00000100	/* IP packets may be exchanged */
-#define SC_LOOP_TRAFFIC	0x00000200	/* send traffic to pppd */
-#define SC_MULTILINK	0x00000400	/* do multilink encapsulation */
-#define SC_MP_SHORTSEQ	0x00000800	/* use short MP sequence numbers */
-#define SC_COMP_RUN	0x00001000	/* compressor has been inited */
-#define SC_DECOMP_RUN	0x00002000	/* decompressor has been inited */
-#define SC_MP_XSHORTSEQ	0x00004000	/* transmit short MP seq numbers */
-#define SC_DEBUG	0x00010000	/* enable debug messages */
-#define SC_LOG_INPKT	0x00020000	/* log contents of good pkts recvd */
-#define SC_LOG_OUTPKT	0x00040000	/* log contents of pkts sent */
-#define SC_LOG_RAWIN	0x00080000	/* log all chars received */
-#define SC_LOG_FLUSH	0x00100000	/* log all chars flushed */
-#define	SC_SYNC		0x00200000	/* synchronous serial mode */
-#define	SC_MUST_COMP    0x00400000	/* no uncompressed packets may be sent or received */
-#define	SC_MASK		0x0f600fff	/* bits that user can change */
-
-/* state bits */
-#define SC_XMIT_BUSY	0x10000000	/* (used by isdn_ppp?) */
-#define SC_RCV_ODDP	0x08000000	/* have rcvd char with odd parity */
-#define SC_RCV_EVNP	0x04000000	/* have rcvd char with even parity */
-#define SC_RCV_B7_1	0x02000000	/* have rcvd char with bit 7 = 1 */
-#define SC_RCV_B7_0	0x01000000	/* have rcvd char with bit 7 = 0 */
-#define SC_DC_FERROR	0x00800000	/* fatal decomp error detected */
-#define SC_DC_ERROR	0x00400000	/* non-fatal decomp error detected */
-
-/* Used with PPPIOCGNPMODE/PPPIOCSNPMODE */
-struct npioctl {
-	int		protocol;	/* PPP protocol, e.g. PPP_IP */
-	enum NPmode	mode;
-};
-
-/* Structure describing a CCP configuration option, for PPPIOCSCOMPRESS */
-struct ppp_option_data {
-	__u8	__user *ptr;
-	__u32	length;
-	int	transmit;
-};
-
-/* For PPPIOCGL2TPSTATS */
-struct pppol2tp_ioc_stats {
-	__u16		tunnel_id;	/* redundant */
-	__u16		session_id;	/* if zero, get tunnel stats */
-	__u32		using_ipsec:1;	/* valid only for session_id == 0 */
-	__aligned_u64	tx_packets;
-	__aligned_u64	tx_bytes;
-	__aligned_u64	tx_errors;
-	__aligned_u64	rx_packets;
-	__aligned_u64	rx_bytes;
-	__aligned_u64	rx_seq_discards;
-	__aligned_u64	rx_oos_packets;
-	__aligned_u64	rx_errors;
-};
-
-/*
- * Ioctl definitions.
- */
-
-#define	PPPIOCGFLAGS	_IOR('t', 90, int)	/* get configuration flags */
-#define	PPPIOCSFLAGS	_IOW('t', 89, int)	/* set configuration flags */
-#define	PPPIOCGASYNCMAP	_IOR('t', 88, int)	/* get async map */
-#define	PPPIOCSASYNCMAP	_IOW('t', 87, int)	/* set async map */
-#define	PPPIOCGUNIT	_IOR('t', 86, int)	/* get ppp unit number */
-#define	PPPIOCGRASYNCMAP _IOR('t', 85, int)	/* get receive async map */
-#define	PPPIOCSRASYNCMAP _IOW('t', 84, int)	/* set receive async map */
-#define	PPPIOCGMRU	_IOR('t', 83, int)	/* get max receive unit */
-#define	PPPIOCSMRU	_IOW('t', 82, int)	/* set max receive unit */
-#define	PPPIOCSMAXCID	_IOW('t', 81, int)	/* set VJ max slot ID */
-#define PPPIOCGXASYNCMAP _IOR('t', 80, ext_accm) /* get extended ACCM */
-#define PPPIOCSXASYNCMAP _IOW('t', 79, ext_accm) /* set extended ACCM */
-#define PPPIOCXFERUNIT	_IO('t', 78)		/* transfer PPP unit */
-#define PPPIOCSCOMPRESS	_IOW('t', 77, struct ppp_option_data)
-#define PPPIOCGNPMODE	_IOWR('t', 76, struct npioctl) /* get NP mode */
-#define PPPIOCSNPMODE	_IOW('t', 75, struct npioctl)  /* set NP mode */
-#define PPPIOCSPASS	_IOW('t', 71, struct sock_fprog) /* set pass filter */
-#define PPPIOCSACTIVE	_IOW('t', 70, struct sock_fprog) /* set active filt */
-#define PPPIOCGDEBUG	_IOR('t', 65, int)	/* Read debug level */
-#define PPPIOCSDEBUG	_IOW('t', 64, int)	/* Set debug level */
-#define PPPIOCGIDLE	_IOR('t', 63, struct ppp_idle) /* get idle time */
-#define PPPIOCNEWUNIT	_IOWR('t', 62, int)	/* create new ppp unit */
-#define PPPIOCATTACH	_IOW('t', 61, int)	/* attach to ppp unit */
-#define PPPIOCDETACH	_IOW('t', 60, int)	/* detach from ppp unit/chan */
-#define PPPIOCSMRRU	_IOW('t', 59, int)	/* set multilink MRU */
-#define PPPIOCCONNECT	_IOW('t', 58, int)	/* connect channel to unit */
-#define PPPIOCDISCONN	_IO('t', 57)		/* disconnect channel */
-#define PPPIOCATTCHAN	_IOW('t', 56, int)	/* attach to ppp channel */
-#define PPPIOCGCHAN	_IOR('t', 55, int)	/* get ppp channel number */
-#define PPPIOCGL2TPSTATS _IOR('t', 54, struct pppol2tp_ioc_stats)
-
-#define SIOCGPPPSTATS   (SIOCDEVPRIVATE + 0)
-#define SIOCGPPPVER     (SIOCDEVPRIVATE + 1)	/* NEVER change this!! */
-#define SIOCGPPPCSTATS  (SIOCDEVPRIVATE + 2)
-
-#endif /* _PPP_IOCTL_H */
diff --git a/ANDROID_3.4.5/include/linux/ppp_channel.h b/ANDROID_3.4.5/include/linux/ppp_channel.h
deleted file mode 100644
index 5d87f810..00000000
--- a/ANDROID_3.4.5/include/linux/ppp_channel.h
+++ /dev/null
@@ -1,88 +0,0 @@
-#ifndef _PPP_CHANNEL_H_
-#define _PPP_CHANNEL_H_
-/*
- * Definitions for the interface between the generic PPP code
- * and a PPP channel.
- *
- * A PPP channel provides a way for the generic PPP code to send
- * and receive packets over some sort of communications medium.
- * Packets are stored in sk_buffs and have the 2-byte PPP protocol
- * number at the start, but not the address and control bytes.
- *
- * Copyright 1999 Paul Mackerras.
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  as published by the Free Software Foundation; either version
- *  2 of the License, or (at your option) any later version.
- *
- * ==FILEVERSION 20000322==
- */
-
-#include <linux/list.h>
-#include <linux/skbuff.h>
-#include <linux/poll.h>
-#include <net/net_namespace.h>
-
-struct ppp_channel;
-
-struct ppp_channel_ops {
-	/* Send a packet (or multilink fragment) on this channel.
-	   Returns 1 if it was accepted, 0 if not. */
-	int	(*start_xmit)(struct ppp_channel *, struct sk_buff *);
-	/* Handle an ioctl call that has come in via /dev/ppp. */
-	int	(*ioctl)(struct ppp_channel *, unsigned int, unsigned long);
-};
-
-struct ppp_channel {
-	void		*private;	/* channel private data */
-	const struct ppp_channel_ops *ops; /* operations for this channel */
-	int		mtu;		/* max transmit packet size */
-	int		hdrlen;		/* amount of headroom channel needs */
-	void		*ppp;		/* opaque to channel */
-	int		speed;		/* transfer rate (bytes/second) */
-	/* the following is not used at present */
-	int		latency;	/* overhead time in milliseconds */
-};
-
-#ifdef __KERNEL__
-/* Called by the channel when it can send some more data. */
-extern void ppp_output_wakeup(struct ppp_channel *);
-
-/* Called by the channel to process a received PPP packet.
-   The packet should have just the 2-byte PPP protocol header. */
-extern void ppp_input(struct ppp_channel *, struct sk_buff *);
-
-/* Called by the channel when an input error occurs, indicating
-   that we may have missed a packet. */
-extern void ppp_input_error(struct ppp_channel *, int code);
-
-/* Attach a channel to a given PPP unit in specified net. */
-extern int ppp_register_net_channel(struct net *, struct ppp_channel *);
-
-/* Attach a channel to a given PPP unit. */
-extern int ppp_register_channel(struct ppp_channel *);
-
-/* Detach a channel from its PPP unit (e.g. on hangup). */
-extern void ppp_unregister_channel(struct ppp_channel *);
-
-/* Get the channel number for a channel */
-extern int ppp_channel_index(struct ppp_channel *);
-
-/* Get the unit number associated with a channel, or -1 if none */
-extern int ppp_unit_number(struct ppp_channel *);
-
-/* Get the device name associated with a channel, or NULL if none */
-extern char *ppp_dev_name(struct ppp_channel *);
-
-/*
- * SMP locking notes:
- * The channel code must ensure that when it calls ppp_unregister_channel,
- * nothing is executing in any of the procedures above, for that
- * channel.  The generic layer will ensure that nothing is executing
- * in the start_xmit and ioctl routines for the channel by the time
- * that ppp_unregister_channel returns.
- */
-
-#endif /* __KERNEL__ */
-#endif
diff --git a/ANDROID_3.4.5/include/linux/ppp_defs.h b/ANDROID_3.4.5/include/linux/ppp_defs.h
deleted file mode 100644
index ba416f67..00000000
--- a/ANDROID_3.4.5/include/linux/ppp_defs.h
+++ /dev/null
@@ -1,154 +0,0 @@
-/*
- * ppp_defs.h - PPP definitions.
- *
- * Copyright 1994-2000 Paul Mackerras.
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  version 2 as published by the Free Software Foundation.
- */
-#include <linux/types.h>
-
-#ifndef _PPP_DEFS_H_
-#define _PPP_DEFS_H_
-
-/*
- * The basic PPP frame.
- */
-#define PPP_HDRLEN	4	/* octets for standard ppp header */
-#define PPP_FCSLEN	2	/* octets for FCS */
-#define PPP_MRU		1500	/* default MRU = max length of info field */
-
-#define PPP_ADDRESS(p)	(((__u8 *)(p))[0])
-#define PPP_CONTROL(p)	(((__u8 *)(p))[1])
-#define PPP_PROTOCOL(p)	((((__u8 *)(p))[2] << 8) + ((__u8 *)(p))[3])
-
-/*
- * Significant octet values.
- */
-#define	PPP_ALLSTATIONS	0xff	/* All-Stations broadcast address */
-#define	PPP_UI		0x03	/* Unnumbered Information */
-#define	PPP_FLAG	0x7e	/* Flag Sequence */
-#define	PPP_ESCAPE	0x7d	/* Asynchronous Control Escape */
-#define	PPP_TRANS	0x20	/* Asynchronous transparency modifier */
-
-/*
- * Protocol field values.
- */
-#define PPP_IP		0x21	/* Internet Protocol */
-#define PPP_AT		0x29	/* AppleTalk Protocol */
-#define PPP_IPX		0x2b	/* IPX protocol */
-#define	PPP_VJC_COMP	0x2d	/* VJ compressed TCP */
-#define	PPP_VJC_UNCOMP	0x2f	/* VJ uncompressed TCP */
-#define PPP_MP		0x3d	/* Multilink protocol */
-#define PPP_IPV6	0x57	/* Internet Protocol Version 6 */
-#define PPP_COMPFRAG	0xfb	/* fragment compressed below bundle */
-#define PPP_COMP	0xfd	/* compressed packet */
-#define PPP_MPLS_UC	0x0281	/* Multi Protocol Label Switching - Unicast */
-#define PPP_MPLS_MC	0x0283	/* Multi Protocol Label Switching - Multicast */
-#define PPP_IPCP	0x8021	/* IP Control Protocol */
-#define PPP_ATCP	0x8029	/* AppleTalk Control Protocol */
-#define PPP_IPXCP	0x802b	/* IPX Control Protocol */
-#define PPP_IPV6CP	0x8057	/* IPv6 Control Protocol */
-#define PPP_CCPFRAG	0x80fb	/* CCP at link level (below MP bundle) */
-#define PPP_CCP		0x80fd	/* Compression Control Protocol */
-#define PPP_MPLSCP	0x80fd	/* MPLS Control Protocol */
-#define PPP_LCP		0xc021	/* Link Control Protocol */
-#define PPP_PAP		0xc023	/* Password Authentication Protocol */
-#define PPP_LQR		0xc025	/* Link Quality Report protocol */
-#define PPP_CHAP	0xc223	/* Cryptographic Handshake Auth. Protocol */
-#define PPP_CBCP	0xc029	/* Callback Control Protocol */
-
-/*
- * Values for FCS calculations.
- */
-
-#define PPP_INITFCS	0xffff	/* Initial FCS value */
-#define PPP_GOODFCS	0xf0b8	/* Good final FCS value */
-
-#ifdef __KERNEL__
-#include <linux/crc-ccitt.h>
-#define PPP_FCS(fcs, c) crc_ccitt_byte(fcs, c)
-#endif
-
-/*
- * Extended asyncmap - allows any character to be escaped.
- */
-
-typedef __u32		ext_accm[8];
-
-/*
- * What to do with network protocol (NP) packets.
- */
-enum NPmode {
-    NPMODE_PASS,		/* pass the packet through */
-    NPMODE_DROP,		/* silently drop the packet */
-    NPMODE_ERROR,		/* return an error */
-    NPMODE_QUEUE		/* save it up for later. */
-};
-
-/*
- * Statistics for LQRP and pppstats
- */
-struct pppstat	{
-    __u32	ppp_discards;	/* # frames discarded */
-
-    __u32	ppp_ibytes;	/* bytes received */
-    __u32	ppp_ioctects;	/* bytes received not in error */
-    __u32	ppp_ipackets;	/* packets received */
-    __u32	ppp_ierrors;	/* receive errors */
-    __u32	ppp_ilqrs;	/* # LQR frames received */
-
-    __u32	ppp_obytes;	/* raw bytes sent */
-    __u32	ppp_ooctects;	/* frame bytes sent */
-    __u32	ppp_opackets;	/* packets sent */
-    __u32	ppp_oerrors;	/* transmit errors */ 
-    __u32	ppp_olqrs;	/* # LQR frames sent */
-};
-
-struct vjstat {
-    __u32	vjs_packets;	/* outbound packets */
-    __u32	vjs_compressed;	/* outbound compressed packets */
-    __u32	vjs_searches;	/* searches for connection state */
-    __u32	vjs_misses;	/* times couldn't find conn. state */
-    __u32	vjs_uncompressedin; /* inbound uncompressed packets */
-    __u32	vjs_compressedin;   /* inbound compressed packets */
-    __u32	vjs_errorin;	/* inbound unknown type packets */
-    __u32	vjs_tossed;	/* inbound packets tossed because of error */
-};
-
-struct compstat {
-    __u32	unc_bytes;	/* total uncompressed bytes */
-    __u32	unc_packets;	/* total uncompressed packets */
-    __u32	comp_bytes;	/* compressed bytes */
-    __u32	comp_packets;	/* compressed packets */
-    __u32	inc_bytes;	/* incompressible bytes */
-    __u32	inc_packets;	/* incompressible packets */
-
-    /* the compression ratio is defined as in_count / bytes_out */
-    __u32       in_count;	/* Bytes received */
-    __u32       bytes_out;	/* Bytes transmitted */
-
-    double	ratio;		/* not computed in kernel. */
-};
-
-struct ppp_stats {
-    struct pppstat	p;	/* basic PPP statistics */
-    struct vjstat	vj;	/* VJ header compression statistics */
-};
-
-struct ppp_comp_stats {
-    struct compstat	c;	/* packet compression statistics */
-    struct compstat	d;	/* packet decompression statistics */
-};
-
-/*
- * The following structure records the time in seconds since
- * the last NP packet was sent or received.
- */
-struct ppp_idle {
-    __kernel_time_t xmit_idle;	/* time since last NP packet sent */
-    __kernel_time_t recv_idle;	/* time since last NP packet received */
-};
-
-#endif /* _PPP_DEFS_H_ */
diff --git a/ANDROID_3.4.5/include/linux/pps-gpio.h b/ANDROID_3.4.5/include/linux/pps-gpio.h
deleted file mode 100644
index 0035abe4..00000000
--- a/ANDROID_3.4.5/include/linux/pps-gpio.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * pps-gpio.h -- PPS client for GPIOs
- *
- *
- * Copyright (C) 2011 James Nuss <jamesnuss@nanometrics.ca>
- *
- *   This program is free software; you can redistribute it and/or modify
- *   it under the terms of the GNU General Public License as published by
- *   the Free Software Foundation; either version 2 of the License, or
- *   (at your option) any later version.
- *
- *   This program is distributed in the hope that it will be useful,
- *   but WITHOUT ANY WARRANTY; without even the implied warranty of
- *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *   GNU General Public License for more details.
- *
- *   You should have received a copy of the GNU General Public License
- *   along with this program; if not, write to the Free Software
- *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef _PPS_GPIO_H
-#define _PPS_GPIO_H
-
-struct pps_gpio_platform_data {
-	bool assert_falling_edge;
-	bool capture_clear;
-	unsigned int gpio_pin;
-	const char *gpio_label;
-};
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/pps.h b/ANDROID_3.4.5/include/linux/pps.h
deleted file mode 100644
index a9bb1d93..00000000
--- a/ANDROID_3.4.5/include/linux/pps.h
+++ /dev/null
@@ -1,131 +0,0 @@
-/*
- * PPS API header
- *
- * Copyright (C) 2005-2009   Rodolfo Giometti <giometti@linux.it>
- *
- *   This program is free software; you can redistribute it and/or modify
- *   it under the terms of the GNU General Public License as published by
- *   the Free Software Foundation; either version 2 of the License, or
- *   (at your option) any later version.
- *
- *   This program is distributed in the hope that it will be useful,
- *   but WITHOUT ANY WARRANTY; without even the implied warranty of
- *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *   GNU General Public License for more details.
- *
- *   You should have received a copy of the GNU General Public License
- *   along with this program; if not, write to the Free Software
- *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-
-#ifndef _PPS_H_
-#define _PPS_H_
-
-#include <linux/types.h>
-
-#define PPS_VERSION		"5.3.6"
-#define PPS_MAX_SOURCES		16		/* should be enough... */
-
-/* Implementation note: the logical states ``assert'' and ``clear''
- * are implemented in terms of the chip register, i.e. ``assert''
- * means the bit is set.  */
-
-/*
- * 3.2 New data structures
- */
-
-#define PPS_API_VERS_1		1
-#define PPS_API_VERS		PPS_API_VERS_1	/* we use API version 1 */
-#define PPS_MAX_NAME_LEN	32
-
-/* 32-bit vs. 64-bit compatibility.
- *
- * 0n i386, the alignment of a uint64_t is only 4 bytes, while on most other
- * architectures it's 8 bytes. On i386, there will be no padding between the
- * two consecutive 'struct pps_ktime' members of struct pps_kinfo and struct
- * pps_kparams. But on most platforms there will be padding to ensure correct
- * alignment.
- *
- * The simple fix is probably to add an explicit padding.
- *					 		[David Woodhouse]
- */
-struct pps_ktime {
-	__s64 sec;
-	__s32 nsec;
-	__u32 flags;
-};
-#define PPS_TIME_INVALID	(1<<0)	/* used to specify timeout==NULL */
-
-struct pps_kinfo {
-	__u32 assert_sequence;		/* seq. num. of assert event */
-	__u32 clear_sequence; 		/* seq. num. of clear event */
-	struct pps_ktime assert_tu;	/* time of assert event */
-	struct pps_ktime clear_tu;	/* time of clear event */
-	int current_mode;		/* current mode bits */
-};
-
-struct pps_kparams {
-	int api_version;		/* API version # */
-	int mode;			/* mode bits */
-	struct pps_ktime assert_off_tu;	/* offset compensation for assert */
-	struct pps_ktime clear_off_tu;	/* offset compensation for clear */
-};
-
-/*
- * 3.3 Mode bit definitions
- */
-
-/* Device/implementation parameters */
-#define PPS_CAPTUREASSERT	0x01	/* capture assert events */
-#define PPS_CAPTURECLEAR	0x02	/* capture clear events */
-#define PPS_CAPTUREBOTH		0x03	/* capture assert and clear events */
-
-#define PPS_OFFSETASSERT	0x10	/* apply compensation for assert ev. */
-#define PPS_OFFSETCLEAR		0x20	/* apply compensation for clear ev. */
-
-#define PPS_CANWAIT		0x100	/* can we wait for an event? */
-#define PPS_CANPOLL		0x200	/* bit reserved for future use */
-
-/* Kernel actions */
-#define PPS_ECHOASSERT		0x40	/* feed back assert event to output */
-#define PPS_ECHOCLEAR		0x80	/* feed back clear event to output */
-
-/* Timestamp formats */
-#define PPS_TSFMT_TSPEC		0x1000	/* select timespec format */
-#define PPS_TSFMT_NTPFP		0x2000	/* select NTP format */
-
-/*
- * 3.4.4 New functions: disciplining the kernel timebase
- */
-
-/* Kernel consumers */
-#define PPS_KC_HARDPPS		0	/* hardpps() (or equivalent) */
-#define PPS_KC_HARDPPS_PLL	1	/* hardpps() constrained to
-					   use a phase-locked loop */
-#define PPS_KC_HARDPPS_FLL	2	/* hardpps() constrained to
-					   use a frequency-locked loop */
-/*
- * Here begins the implementation-specific part!
- */
-
-struct pps_fdata {
-	struct pps_kinfo info;
-	struct pps_ktime timeout;
-};
-
-struct pps_bind_args {
-	int tsformat;	/* format of time stamps */
-	int edge;	/* selected event type */
-	int consumer;	/* selected kernel consumer */
-};
-
-#include <linux/ioctl.h>
-
-#define PPS_GETPARAMS		_IOR('p', 0xa1, struct pps_kparams *)
-#define PPS_SETPARAMS		_IOW('p', 0xa2, struct pps_kparams *)
-#define PPS_GETCAP		_IOR('p', 0xa3, int *)
-#define PPS_FETCH		_IOWR('p', 0xa4, struct pps_fdata *)
-#define PPS_KC_BIND		_IOW('p', 0xa5, struct pps_bind_args *)
-
-#endif /* _PPS_H_ */
diff --git a/ANDROID_3.4.5/include/linux/pps_kernel.h b/ANDROID_3.4.5/include/linux/pps_kernel.h
deleted file mode 100644
index 94048547..00000000
--- a/ANDROID_3.4.5/include/linux/pps_kernel.h
+++ /dev/null
@@ -1,120 +0,0 @@
-/*
- * PPS API kernel header
- *
- * Copyright (C) 2009   Rodolfo Giometti <giometti@linux.it>
- *
- *   This program is free software; you can redistribute it and/or modify
- *   it under the terms of the GNU General Public License as published by
- *   the Free Software Foundation; either version 2 of the License, or
- *   (at your option) any later version.
- *
- *   This program is distributed in the hope that it will be useful,
- *   but WITHOUT ANY WARRANTY; without even the implied warranty of
- *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *   GNU General Public License for more details.
- *
- *   You should have received a copy of the GNU General Public License
- *   along with this program; if not, write to the Free Software
- *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef LINUX_PPS_KERNEL_H
-#define LINUX_PPS_KERNEL_H
-
-#include <linux/pps.h>
-
-#include <linux/cdev.h>
-#include <linux/device.h>
-#include <linux/time.h>
-
-/*
- * Global defines
- */
-
-struct pps_device;
-
-/* The specific PPS source info */
-struct pps_source_info {
-	char name[PPS_MAX_NAME_LEN];		/* simbolic name */
-	char path[PPS_MAX_NAME_LEN];		/* path of connected device */
-	int mode;				/* PPS's allowed mode */
-
-	void (*echo)(struct pps_device *pps,
-			int event, void *data);	/* PPS echo function */
-
-	struct module *owner;
-	struct device *dev;
-};
-
-struct pps_event_time {
-#ifdef CONFIG_NTP_PPS
-	struct timespec ts_raw;
-#endif /* CONFIG_NTP_PPS */
-	struct timespec ts_real;
-};
-
-/* The main struct */
-struct pps_device {
-	struct pps_source_info info;		/* PSS source info */
-
-	struct pps_kparams params;		/* PPS's current params */
-
-	__u32 assert_sequence;			/* PPS' assert event seq # */
-	__u32 clear_sequence;			/* PPS' clear event seq # */
-	struct pps_ktime assert_tu;
-	struct pps_ktime clear_tu;
-	int current_mode;			/* PPS mode at event time */
-
-	unsigned int last_ev;			/* last PPS event id */
-	wait_queue_head_t queue;		/* PPS event queue */
-
-	unsigned int id;			/* PPS source unique ID */
-	struct cdev cdev;
-	struct device *dev;
-	struct fasync_struct *async_queue;	/* fasync method */
-	spinlock_t lock;
-};
-
-/*
- * Global variables
- */
-
-extern struct device_attribute pps_attrs[];
-
-/*
- * Exported functions
- */
-
-extern struct pps_device *pps_register_source(
-		struct pps_source_info *info, int default_params);
-extern void pps_unregister_source(struct pps_device *pps);
-extern int pps_register_cdev(struct pps_device *pps);
-extern void pps_unregister_cdev(struct pps_device *pps);
-extern void pps_event(struct pps_device *pps,
-		struct pps_event_time *ts, int event, void *data);
-
-static inline void timespec_to_pps_ktime(struct pps_ktime *kt,
-		struct timespec ts)
-{
-	kt->sec = ts.tv_sec;
-	kt->nsec = ts.tv_nsec;
-}
-
-#ifdef CONFIG_NTP_PPS
-
-static inline void pps_get_ts(struct pps_event_time *ts)
-{
-	getnstime_raw_and_real(&ts->ts_raw, &ts->ts_real);
-}
-
-#else /* CONFIG_NTP_PPS */
-
-static inline void pps_get_ts(struct pps_event_time *ts)
-{
-	getnstimeofday(&ts->ts_real);
-}
-
-#endif /* CONFIG_NTP_PPS */
-
-#endif /* LINUX_PPS_KERNEL_H */
-
diff --git a/ANDROID_3.4.5/include/linux/prctl.h b/ANDROID_3.4.5/include/linux/prctl.h
deleted file mode 100644
index e0cfec24..00000000
--- a/ANDROID_3.4.5/include/linux/prctl.h
+++ /dev/null
@@ -1,127 +0,0 @@
-#ifndef _LINUX_PRCTL_H
-#define _LINUX_PRCTL_H
-
-/* Values to pass as first argument to prctl() */
-
-#define PR_SET_PDEATHSIG  1  /* Second arg is a signal */
-#define PR_GET_PDEATHSIG  2  /* Second arg is a ptr to return the signal */
-
-/* Get/set current->mm->dumpable */
-#define PR_GET_DUMPABLE   3
-#define PR_SET_DUMPABLE   4
-
-/* Get/set unaligned access control bits (if meaningful) */
-#define PR_GET_UNALIGN	  5
-#define PR_SET_UNALIGN	  6
-# define PR_UNALIGN_NOPRINT	1	/* silently fix up unaligned user accesses */
-# define PR_UNALIGN_SIGBUS	2	/* generate SIGBUS on unaligned user access */
-
-/* Get/set whether or not to drop capabilities on setuid() away from
- * uid 0 (as per security/commoncap.c) */
-#define PR_GET_KEEPCAPS   7
-#define PR_SET_KEEPCAPS   8
-
-/* Get/set floating-point emulation control bits (if meaningful) */
-#define PR_GET_FPEMU  9
-#define PR_SET_FPEMU 10
-# define PR_FPEMU_NOPRINT	1	/* silently emulate fp operations accesses */
-# define PR_FPEMU_SIGFPE	2	/* don't emulate fp operations, send SIGFPE instead */
-
-/* Get/set floating-point exception mode (if meaningful) */
-#define PR_GET_FPEXC	11
-#define PR_SET_FPEXC	12
-# define PR_FP_EXC_SW_ENABLE	0x80	/* Use FPEXC for FP exception enables */
-# define PR_FP_EXC_DIV		0x010000	/* floating point divide by zero */
-# define PR_FP_EXC_OVF		0x020000	/* floating point overflow */
-# define PR_FP_EXC_UND		0x040000	/* floating point underflow */
-# define PR_FP_EXC_RES		0x080000	/* floating point inexact result */
-# define PR_FP_EXC_INV		0x100000	/* floating point invalid operation */
-# define PR_FP_EXC_DISABLED	0	/* FP exceptions disabled */
-# define PR_FP_EXC_NONRECOV	1	/* async non-recoverable exc. mode */
-# define PR_FP_EXC_ASYNC	2	/* async recoverable exception mode */
-# define PR_FP_EXC_PRECISE	3	/* precise exception mode */
-
-/* Get/set whether we use statistical process timing or accurate timestamp
- * based process timing */
-#define PR_GET_TIMING   13
-#define PR_SET_TIMING   14
-# define PR_TIMING_STATISTICAL  0       /* Normal, traditional,
-                                                   statistical process timing */
-# define PR_TIMING_TIMESTAMP    1       /* Accurate timestamp based
-                                                   process timing */
-
-#define PR_SET_NAME    15		/* Set process name */
-#define PR_GET_NAME    16		/* Get process name */
-
-/* Get/set process endian */
-#define PR_GET_ENDIAN	19
-#define PR_SET_ENDIAN	20
-# define PR_ENDIAN_BIG		0
-# define PR_ENDIAN_LITTLE	1	/* True little endian mode */
-# define PR_ENDIAN_PPC_LITTLE	2	/* "PowerPC" pseudo little endian */
-
-/* Get/set process seccomp mode */
-#define PR_GET_SECCOMP	21
-#define PR_SET_SECCOMP	22
-
-/* Get/set the capability bounding set (as per security/commoncap.c) */
-#define PR_CAPBSET_READ 23
-#define PR_CAPBSET_DROP 24
-
-/* Get/set the process' ability to use the timestamp counter instruction */
-#define PR_GET_TSC 25
-#define PR_SET_TSC 26
-# define PR_TSC_ENABLE		1	/* allow the use of the timestamp counter */
-# define PR_TSC_SIGSEGV		2	/* throw a SIGSEGV instead of reading the TSC */
-
-/* Get/set securebits (as per security/commoncap.c) */
-#define PR_GET_SECUREBITS 27
-#define PR_SET_SECUREBITS 28
-
-/*
- * Get/set the timerslack as used by poll/select/nanosleep
- * A value of 0 means "use default"
- */
-#define PR_SET_TIMERSLACK 29
-#define PR_GET_TIMERSLACK 30
-
-#define PR_TASK_PERF_EVENTS_DISABLE		31
-#define PR_TASK_PERF_EVENTS_ENABLE		32
-
-/*
- * Set early/late kill mode for hwpoison memory corruption.
- * This influences when the process gets killed on a memory corruption.
- */
-#define PR_MCE_KILL	33
-# define PR_MCE_KILL_CLEAR   0
-# define PR_MCE_KILL_SET     1
-
-# define PR_MCE_KILL_LATE    0
-# define PR_MCE_KILL_EARLY   1
-# define PR_MCE_KILL_DEFAULT 2
-
-#define PR_MCE_KILL_GET 34
-
-/*
- * Tune up process memory map specifics.
- */
-#define PR_SET_MM		35
-# define PR_SET_MM_START_CODE		1
-# define PR_SET_MM_END_CODE		2
-# define PR_SET_MM_START_DATA		3
-# define PR_SET_MM_END_DATA		4
-# define PR_SET_MM_START_STACK		5
-# define PR_SET_MM_START_BRK		6
-# define PR_SET_MM_BRK			7
-
-/*
- * Set specific pid that is allowed to ptrace the current task.
- * A value of 0 mean "no process".
- */
-#define PR_SET_PTRACER 0x59616d61
-# define PR_SET_PTRACER_ANY ((unsigned long)-1)
-
-#define PR_SET_CHILD_SUBREAPER 36
-#define PR_GET_CHILD_SUBREAPER 37
-
-#endif /* _LINUX_PRCTL_H */
diff --git a/ANDROID_3.4.5/include/linux/preempt.h b/ANDROID_3.4.5/include/linux/preempt.h
deleted file mode 100644
index 5a710b9c..00000000
--- a/ANDROID_3.4.5/include/linux/preempt.h
+++ /dev/null
@@ -1,155 +0,0 @@
-#ifndef __LINUX_PREEMPT_H
-#define __LINUX_PREEMPT_H
-
-/*
- * include/linux/preempt.h - macros for accessing and manipulating
- * preempt_count (used for kernel preemption, interrupt count, etc.)
- */
-
-#include <linux/thread_info.h>
-#include <linux/linkage.h>
-#include <linux/list.h>
-
-#if defined(CONFIG_DEBUG_PREEMPT) || defined(CONFIG_PREEMPT_TRACER)
-  extern void add_preempt_count(int val);
-  extern void sub_preempt_count(int val);
-#else
-# define add_preempt_count(val)	do { preempt_count() += (val); } while (0)
-# define sub_preempt_count(val)	do { preempt_count() -= (val); } while (0)
-#endif
-
-#define inc_preempt_count() add_preempt_count(1)
-#define dec_preempt_count() sub_preempt_count(1)
-
-#define preempt_count()	(current_thread_info()->preempt_count)
-
-#ifdef CONFIG_PREEMPT
-
-asmlinkage void preempt_schedule(void);
-
-#define preempt_check_resched() \
-do { \
-	if (unlikely(test_thread_flag(TIF_NEED_RESCHED))) \
-		preempt_schedule(); \
-} while (0)
-
-#else /* !CONFIG_PREEMPT */
-
-#define preempt_check_resched()		do { } while (0)
-
-#endif /* CONFIG_PREEMPT */
-
-
-#ifdef CONFIG_PREEMPT_COUNT
-
-#define preempt_disable() \
-do { \
-	inc_preempt_count(); \
-	barrier(); \
-} while (0)
-
-#define sched_preempt_enable_no_resched() \
-do { \
-	barrier(); \
-	dec_preempt_count(); \
-} while (0)
-
-#define preempt_enable_no_resched()	sched_preempt_enable_no_resched()
-
-#define preempt_enable() \
-do { \
-	preempt_enable_no_resched(); \
-	barrier(); \
-	preempt_check_resched(); \
-} while (0)
-
-/* For debugging and tracer internals only! */
-#define add_preempt_count_notrace(val)			\
-	do { preempt_count() += (val); } while (0)
-#define sub_preempt_count_notrace(val)			\
-	do { preempt_count() -= (val); } while (0)
-#define inc_preempt_count_notrace() add_preempt_count_notrace(1)
-#define dec_preempt_count_notrace() sub_preempt_count_notrace(1)
-
-#define preempt_disable_notrace() \
-do { \
-	inc_preempt_count_notrace(); \
-	barrier(); \
-} while (0)
-
-#define preempt_enable_no_resched_notrace() \
-do { \
-	barrier(); \
-	dec_preempt_count_notrace(); \
-} while (0)
-
-/* preempt_check_resched is OK to trace */
-#define preempt_enable_notrace() \
-do { \
-	preempt_enable_no_resched_notrace(); \
-	barrier(); \
-	preempt_check_resched(); \
-} while (0)
-
-#else /* !CONFIG_PREEMPT_COUNT */
-
-#define preempt_disable()		do { } while (0)
-#define sched_preempt_enable_no_resched()	do { } while (0)
-#define preempt_enable_no_resched()	do { } while (0)
-#define preempt_enable()		do { } while (0)
-
-#define preempt_disable_notrace()		do { } while (0)
-#define preempt_enable_no_resched_notrace()	do { } while (0)
-#define preempt_enable_notrace()		do { } while (0)
-
-#endif /* CONFIG_PREEMPT_COUNT */
-
-#ifdef CONFIG_PREEMPT_NOTIFIERS
-
-struct preempt_notifier;
-
-/**
- * preempt_ops - notifiers called when a task is preempted and rescheduled
- * @sched_in: we're about to be rescheduled:
- *    notifier: struct preempt_notifier for the task being scheduled
- *    cpu:  cpu we're scheduled on
- * @sched_out: we've just been preempted
- *    notifier: struct preempt_notifier for the task being preempted
- *    next: the task that's kicking us out
- *
- * Please note that sched_in and out are called under different
- * contexts.  sched_out is called with rq lock held and irq disabled
- * while sched_in is called without rq lock and irq enabled.  This
- * difference is intentional and depended upon by its users.
- */
-struct preempt_ops {
-	void (*sched_in)(struct preempt_notifier *notifier, int cpu);
-	void (*sched_out)(struct preempt_notifier *notifier,
-			  struct task_struct *next);
-};
-
-/**
- * preempt_notifier - key for installing preemption notifiers
- * @link: internal use
- * @ops: defines the notifier functions to be called
- *
- * Usually used in conjunction with container_of().
- */
-struct preempt_notifier {
-	struct hlist_node link;
-	struct preempt_ops *ops;
-};
-
-void preempt_notifier_register(struct preempt_notifier *notifier);
-void preempt_notifier_unregister(struct preempt_notifier *notifier);
-
-static inline void preempt_notifier_init(struct preempt_notifier *notifier,
-				     struct preempt_ops *ops)
-{
-	INIT_HLIST_NODE(&notifier->link);
-	notifier->ops = ops;
-}
-
-#endif
-
-#endif /* __LINUX_PREEMPT_H */
diff --git a/ANDROID_3.4.5/include/linux/prefetch.h b/ANDROID_3.4.5/include/linux/prefetch.h
deleted file mode 100644
index a3bfbdf6..00000000
--- a/ANDROID_3.4.5/include/linux/prefetch.h
+++ /dev/null
@@ -1,64 +0,0 @@
-/*
- *  Generic cache management functions. Everything is arch-specific,  
- *  but this header exists to make sure the defines/functions can be
- *  used in a generic way.
- *
- *  2000-11-13  Arjan van de Ven   <arjan@fenrus.demon.nl>
- *
- */
-
-#ifndef _LINUX_PREFETCH_H
-#define _LINUX_PREFETCH_H
-
-#include <linux/types.h>
-#include <asm/processor.h>
-#include <asm/cache.h>
-
-/*
-	prefetch(x) attempts to pre-emptively get the memory pointed to
-	by address "x" into the CPU L1 cache. 
-	prefetch(x) should not cause any kind of exception, prefetch(0) is
-	specifically ok.
-
-	prefetch() should be defined by the architecture, if not, the 
-	#define below provides a no-op define.	
-	
-	There are 3 prefetch() macros:
-	
-	prefetch(x)  	- prefetches the cacheline at "x" for read
-	prefetchw(x)	- prefetches the cacheline at "x" for write
-	spin_lock_prefetch(x) - prefetches the spinlock *x for taking
-	
-	there is also PREFETCH_STRIDE which is the architecure-preferred 
-	"lookahead" size for prefetching streamed operations.
-	
-*/
-
-#ifndef ARCH_HAS_PREFETCH
-#define prefetch(x) __builtin_prefetch(x)
-#endif
-
-#ifndef ARCH_HAS_PREFETCHW
-#define prefetchw(x) __builtin_prefetch(x,1)
-#endif
-
-#ifndef ARCH_HAS_SPINLOCK_PREFETCH
-#define spin_lock_prefetch(x) prefetchw(x)
-#endif
-
-#ifndef PREFETCH_STRIDE
-#define PREFETCH_STRIDE (4*L1_CACHE_BYTES)
-#endif
-
-static inline void prefetch_range(void *addr, size_t len)
-{
-#ifdef ARCH_HAS_PREFETCH
-	char *cp;
-	char *end = addr + len;
-
-	for (cp = addr; cp < end; cp += PREFETCH_STRIDE)
-		prefetch(cp);
-#endif
-}
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/printk.h b/ANDROID_3.4.5/include/linux/printk.h
deleted file mode 100644
index 0525927f..00000000
--- a/ANDROID_3.4.5/include/linux/printk.h
+++ /dev/null
@@ -1,319 +0,0 @@
-#ifndef __KERNEL_PRINTK__
-#define __KERNEL_PRINTK__
-
-#include <linux/init.h>
-
-extern const char linux_banner[];
-extern const char linux_proc_banner[];
-
-#define KERN_EMERG	"<0>"	/* system is unusable			*/
-#define KERN_ALERT	"<1>"	/* action must be taken immediately	*/
-#define KERN_CRIT	"<2>"	/* critical conditions			*/
-#define KERN_ERR	"<3>"	/* error conditions			*/
-#define KERN_WARNING	"<4>"	/* warning conditions			*/
-#define KERN_NOTICE	"<5>"	/* normal but significant condition	*/
-#define KERN_INFO	"<6>"	/* informational			*/
-#define KERN_DEBUG	"<7>"	/* debug-level messages			*/
-
-/* Use the default kernel loglevel */
-#define KERN_DEFAULT	"<d>"
-/*
- * Annotation for a "continued" line of log printout (only done after a
- * line that had no enclosing \n). Only to be used by core/arch code
- * during early bootup (a continued line is not SMP-safe otherwise).
- */
-#define KERN_CONT	"<c>"
-
-extern int console_printk[];
-
-#define console_loglevel (console_printk[0])
-#define default_message_loglevel (console_printk[1])
-#define minimum_console_loglevel (console_printk[2])
-#define default_console_loglevel (console_printk[3])
-
-static inline void console_silent(void)
-{
-	console_loglevel = 0;
-}
-
-static inline void console_verbose(void)
-{
-	if (console_loglevel)
-		console_loglevel = 15;
-}
-
-struct va_format {
-	const char *fmt;
-	va_list *va;
-};
-
-/*
- * FW_BUG
- * Add this to a message where you are sure the firmware is buggy or behaves
- * really stupid or out of spec. Be aware that the responsible BIOS developer
- * should be able to fix this issue or at least get a concrete idea of the
- * problem by reading your message without the need of looking at the kernel
- * code.
- *
- * Use it for definite and high priority BIOS bugs.
- *
- * FW_WARN
- * Use it for not that clear (e.g. could the kernel messed up things already?)
- * and medium priority BIOS bugs.
- *
- * FW_INFO
- * Use this one if you want to tell the user or vendor about something
- * suspicious, but generally harmless related to the firmware.
- *
- * Use it for information or very low priority BIOS bugs.
- */
-#define FW_BUG		"[Firmware Bug]: "
-#define FW_WARN		"[Firmware Warn]: "
-#define FW_INFO		"[Firmware Info]: "
-
-/*
- * HW_ERR
- * Add this to a message for hardware errors, so that user can report
- * it to hardware vendor instead of LKML or software vendor.
- */
-#define HW_ERR		"[Hardware Error]: "
-
-/*
- * Dummy printk for disabled debugging statements to use whilst maintaining
- * gcc's format and side-effect checking.
- */
-static inline __printf(1, 2)
-int no_printk(const char *fmt, ...)
-{
-	return 0;
-}
-
-extern asmlinkage __printf(1, 2)
-void early_printk(const char *fmt, ...);
-
-extern int printk_needs_cpu(int cpu);
-extern void printk_tick(void);
-
-#ifdef CONFIG_PRINTK
-asmlinkage __printf(1, 0)
-int vprintk(const char *fmt, va_list args);
-asmlinkage __printf(1, 2) __cold
-int printk(const char *fmt, ...);
-
-/*
- * Special printk facility for scheduler use only, _DO_NOT_USE_ !
- */
-__printf(1, 2) __cold int printk_sched(const char *fmt, ...);
-
-/*
- * Please don't use printk_ratelimit(), because it shares ratelimiting state
- * with all other unrelated printk_ratelimit() callsites.  Instead use
- * printk_ratelimited() or plain old __ratelimit().
- */
-extern int __printk_ratelimit(const char *func);
-#define printk_ratelimit() __printk_ratelimit(__func__)
-extern bool printk_timed_ratelimit(unsigned long *caller_jiffies,
-				   unsigned int interval_msec);
-
-extern int printk_delay_msec;
-extern int dmesg_restrict;
-extern int kptr_restrict;
-
-void log_buf_kexec_setup(void);
-void __init setup_log_buf(int early);
-#else
-static inline __printf(1, 0)
-int vprintk(const char *s, va_list args)
-{
-	return 0;
-}
-static inline __printf(1, 2) __cold
-int printk(const char *s, ...)
-{
-	return 0;
-}
-static inline __printf(1, 2) __cold
-int printk_sched(const char *s, ...)
-{
-	return 0;
-}
-static inline int printk_ratelimit(void)
-{
-	return 0;
-}
-static inline bool printk_timed_ratelimit(unsigned long *caller_jiffies,
-					  unsigned int interval_msec)
-{
-	return false;
-}
-
-static inline void log_buf_kexec_setup(void)
-{
-}
-
-static inline void setup_log_buf(int early)
-{
-}
-#endif
-
-extern void dump_stack(void) __cold;
-
-#ifndef pr_fmt
-#define pr_fmt(fmt) fmt
-#endif
-
-#define pr_emerg(fmt, ...) \
-	printk(KERN_EMERG pr_fmt(fmt), ##__VA_ARGS__)
-#define pr_alert(fmt, ...) \
-	printk(KERN_ALERT pr_fmt(fmt), ##__VA_ARGS__)
-#define pr_crit(fmt, ...) \
-	printk(KERN_CRIT pr_fmt(fmt), ##__VA_ARGS__)
-#define pr_err(fmt, ...) \
-	printk(KERN_ERR pr_fmt(fmt), ##__VA_ARGS__)
-#define pr_warning(fmt, ...) \
-	printk(KERN_WARNING pr_fmt(fmt), ##__VA_ARGS__)
-#define pr_warn pr_warning
-#define pr_notice(fmt, ...) \
-	printk(KERN_NOTICE pr_fmt(fmt), ##__VA_ARGS__)
-#define pr_info(fmt, ...) \
-	printk(KERN_INFO pr_fmt(fmt), ##__VA_ARGS__)
-#define pr_cont(fmt, ...) \
-	printk(KERN_CONT fmt, ##__VA_ARGS__)
-
-/* pr_devel() should produce zero code unless DEBUG is defined */
-#ifdef DEBUG
-#define pr_devel(fmt, ...) \
-	printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
-#else
-#define pr_devel(fmt, ...) \
-	no_printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
-#endif
-
-/* If you are writing a driver, please use dev_dbg instead */
-#if defined(CONFIG_DYNAMIC_DEBUG)
-/* dynamic_pr_debug() uses pr_fmt() internally so we don't need it here */
-#define pr_debug(fmt, ...) \
-	dynamic_pr_debug(fmt, ##__VA_ARGS__)
-#elif defined(DEBUG)
-#define pr_debug(fmt, ...) \
-	printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
-#else
-#define pr_debug(fmt, ...) \
-	no_printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
-#endif
-
-/*
- * Print a one-time message (analogous to WARN_ONCE() et al):
- */
-
-#ifdef CONFIG_PRINTK
-#define printk_once(fmt, ...)			\
-({						\
-	static bool __print_once;		\
-						\
-	if (!__print_once) {			\
-		__print_once = true;		\
-		printk(fmt, ##__VA_ARGS__);	\
-	}					\
-})
-#else
-#define printk_once(fmt, ...)			\
-	no_printk(fmt, ##__VA_ARGS__)
-#endif
-
-#define pr_emerg_once(fmt, ...)					\
-	printk_once(KERN_EMERG pr_fmt(fmt), ##__VA_ARGS__)
-#define pr_alert_once(fmt, ...)					\
-	printk_once(KERN_ALERT pr_fmt(fmt), ##__VA_ARGS__)
-#define pr_crit_once(fmt, ...)					\
-	printk_once(KERN_CRIT pr_fmt(fmt), ##__VA_ARGS__)
-#define pr_err_once(fmt, ...)					\
-	printk_once(KERN_ERR pr_fmt(fmt), ##__VA_ARGS__)
-#define pr_warn_once(fmt, ...)					\
-	printk_once(KERN_WARNING pr_fmt(fmt), ##__VA_ARGS__)
-#define pr_notice_once(fmt, ...)				\
-	printk_once(KERN_NOTICE pr_fmt(fmt), ##__VA_ARGS__)
-#define pr_info_once(fmt, ...)					\
-	printk_once(KERN_INFO pr_fmt(fmt), ##__VA_ARGS__)
-#define pr_cont_once(fmt, ...)					\
-	printk_once(KERN_CONT pr_fmt(fmt), ##__VA_ARGS__)
-/* If you are writing a driver, please use dev_dbg instead */
-#if defined(DEBUG)
-#define pr_debug_once(fmt, ...)					\
-	printk_once(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
-#else
-#define pr_debug_once(fmt, ...)					\
-	no_printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
-#endif
-
-/*
- * ratelimited messages with local ratelimit_state,
- * no local ratelimit_state used in the !PRINTK case
- */
-#ifdef CONFIG_PRINTK
-#define printk_ratelimited(fmt, ...)					\
-({									\
-	static DEFINE_RATELIMIT_STATE(_rs,				\
-				      DEFAULT_RATELIMIT_INTERVAL,	\
-				      DEFAULT_RATELIMIT_BURST);		\
-									\
-	if (__ratelimit(&_rs))						\
-		printk(fmt, ##__VA_ARGS__);				\
-})
-#else
-#define printk_ratelimited(fmt, ...)					\
-	no_printk(fmt, ##__VA_ARGS__)
-#endif
-
-#define pr_emerg_ratelimited(fmt, ...)					\
-	printk_ratelimited(KERN_EMERG pr_fmt(fmt), ##__VA_ARGS__)
-#define pr_alert_ratelimited(fmt, ...)					\
-	printk_ratelimited(KERN_ALERT pr_fmt(fmt), ##__VA_ARGS__)
-#define pr_crit_ratelimited(fmt, ...)					\
-	printk_ratelimited(KERN_CRIT pr_fmt(fmt), ##__VA_ARGS__)
-#define pr_err_ratelimited(fmt, ...)					\
-	printk_ratelimited(KERN_ERR pr_fmt(fmt), ##__VA_ARGS__)
-#define pr_warn_ratelimited(fmt, ...)					\
-	printk_ratelimited(KERN_WARNING pr_fmt(fmt), ##__VA_ARGS__)
-#define pr_notice_ratelimited(fmt, ...)					\
-	printk_ratelimited(KERN_NOTICE pr_fmt(fmt), ##__VA_ARGS__)
-#define pr_info_ratelimited(fmt, ...)					\
-	printk_ratelimited(KERN_INFO pr_fmt(fmt), ##__VA_ARGS__)
-/* no pr_cont_ratelimited, don't do that... */
-/* If you are writing a driver, please use dev_dbg instead */
-#if defined(DEBUG)
-#define pr_debug_ratelimited(fmt, ...)					\
-	printk_ratelimited(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
-#else
-#define pr_debug_ratelimited(fmt, ...) \
-	no_printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
-#endif
-
-enum {
-	DUMP_PREFIX_NONE,
-	DUMP_PREFIX_ADDRESS,
-	DUMP_PREFIX_OFFSET
-};
-extern void hex_dump_to_buffer(const void *buf, size_t len,
-			       int rowsize, int groupsize,
-			       char *linebuf, size_t linebuflen, bool ascii);
-#ifdef CONFIG_PRINTK
-extern void print_hex_dump(const char *level, const char *prefix_str,
-			   int prefix_type, int rowsize, int groupsize,
-			   const void *buf, size_t len, bool ascii);
-extern void print_hex_dump_bytes(const char *prefix_str, int prefix_type,
-				 const void *buf, size_t len);
-#else
-static inline void print_hex_dump(const char *level, const char *prefix_str,
-				  int prefix_type, int rowsize, int groupsize,
-				  const void *buf, size_t len, bool ascii)
-{
-}
-static inline void print_hex_dump_bytes(const char *prefix_str, int prefix_type,
-					const void *buf, size_t len)
-{
-}
-
-#endif
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/prio_heap.h b/ANDROID_3.4.5/include/linux/prio_heap.h
deleted file mode 100644
index 08094350..00000000
--- a/ANDROID_3.4.5/include/linux/prio_heap.h
+++ /dev/null
@@ -1,58 +0,0 @@
-#ifndef _LINUX_PRIO_HEAP_H
-#define _LINUX_PRIO_HEAP_H
-
-/*
- * Simple insertion-only static-sized priority heap containing
- * pointers, based on CLR, chapter 7
- */
-
-#include <linux/gfp.h>
-
-/**
- * struct ptr_heap - simple static-sized priority heap
- * @ptrs - pointer to data area
- * @max - max number of elements that can be stored in @ptrs
- * @size - current number of valid elements in @ptrs (in the range 0..@size-1
- * @gt: comparison operator, which should implement "greater than"
- */
-struct ptr_heap {
-	void **ptrs;
-	int max;
-	int size;
-	int (*gt)(void *, void *);
-};
-
-/**
- * heap_init - initialize an empty heap with a given memory size
- * @heap: the heap structure to be initialized
- * @size: amount of memory to use in bytes
- * @gfp_mask: mask to pass to kmalloc()
- * @gt: comparison operator, which should implement "greater than"
- */
-extern int heap_init(struct ptr_heap *heap, size_t size, gfp_t gfp_mask,
-		     int (*gt)(void *, void *));
-
-/**
- * heap_free - release a heap's storage
- * @heap: the heap structure whose data should be released
- */
-void heap_free(struct ptr_heap *heap);
-
-/**
- * heap_insert - insert a value into the heap and return any overflowed value
- * @heap: the heap to be operated on
- * @p: the pointer to be inserted
- *
- * Attempts to insert the given value into the priority heap. If the
- * heap is full prior to the insertion, then the resulting heap will
- * consist of the smallest @max elements of the original heap and the
- * new element; the greatest element will be removed from the heap and
- * returned. Note that the returned element will be the new element
- * (i.e. no change to the heap) if the new element is greater than all
- * elements currently in the heap.
- */
-extern void *heap_insert(struct ptr_heap *heap, void *p);
-
-
-
-#endif /* _LINUX_PRIO_HEAP_H */
diff --git a/ANDROID_3.4.5/include/linux/prio_tree.h b/ANDROID_3.4.5/include/linux/prio_tree.h
deleted file mode 100644
index db04abb5..00000000
--- a/ANDROID_3.4.5/include/linux/prio_tree.h
+++ /dev/null
@@ -1,120 +0,0 @@
-#ifndef _LINUX_PRIO_TREE_H
-#define _LINUX_PRIO_TREE_H
-
-/*
- * K&R 2nd ed. A8.3 somewhat obliquely hints that initial sequences of struct
- * fields with identical types should end up at the same location. We'll use
- * this until we can scrap struct raw_prio_tree_node.
- *
- * Note: all this could be done more elegantly by using unnamed union/struct
- * fields. However, gcc 2.95.3 and apparently also gcc 3.0.4 don't support this
- * language extension.
- */
-
-struct raw_prio_tree_node {
-	struct prio_tree_node	*left;
-	struct prio_tree_node	*right;
-	struct prio_tree_node	*parent;
-};
-
-struct prio_tree_node {
-	struct prio_tree_node	*left;
-	struct prio_tree_node	*right;
-	struct prio_tree_node	*parent;
-	unsigned long		start;
-	unsigned long		last;	/* last location _in_ interval */
-};
-
-struct prio_tree_root {
-	struct prio_tree_node	*prio_tree_node;
-	unsigned short 		index_bits;
-	unsigned short		raw;
-		/*
-		 * 0: nodes are of type struct prio_tree_node
-		 * 1: nodes are of type raw_prio_tree_node
-		 */
-};
-
-struct prio_tree_iter {
-	struct prio_tree_node	*cur;
-	unsigned long		mask;
-	unsigned long		value;
-	int			size_level;
-
-	struct prio_tree_root	*root;
-	pgoff_t			r_index;
-	pgoff_t			h_index;
-};
-
-static inline void prio_tree_iter_init(struct prio_tree_iter *iter,
-		struct prio_tree_root *root, pgoff_t r_index, pgoff_t h_index)
-{
-	iter->root = root;
-	iter->r_index = r_index;
-	iter->h_index = h_index;
-	iter->cur = NULL;
-}
-
-#define __INIT_PRIO_TREE_ROOT(ptr, _raw)	\
-do {					\
-	(ptr)->prio_tree_node = NULL;	\
-	(ptr)->index_bits = 1;		\
-	(ptr)->raw = (_raw);		\
-} while (0)
-
-#define INIT_PRIO_TREE_ROOT(ptr)	__INIT_PRIO_TREE_ROOT(ptr, 0)
-#define INIT_RAW_PRIO_TREE_ROOT(ptr)	__INIT_PRIO_TREE_ROOT(ptr, 1)
-
-#define INIT_PRIO_TREE_NODE(ptr)				\
-do {								\
-	(ptr)->left = (ptr)->right = (ptr)->parent = (ptr);	\
-} while (0)
-
-#define INIT_PRIO_TREE_ITER(ptr)	\
-do {					\
-	(ptr)->cur = NULL;		\
-	(ptr)->mask = 0UL;		\
-	(ptr)->value = 0UL;		\
-	(ptr)->size_level = 0;		\
-} while (0)
-
-#define prio_tree_entry(ptr, type, member) \
-       ((type *)((char *)(ptr)-(unsigned long)(&((type *)0)->member)))
-
-static inline int prio_tree_empty(const struct prio_tree_root *root)
-{
-	return root->prio_tree_node == NULL;
-}
-
-static inline int prio_tree_root(const struct prio_tree_node *node)
-{
-	return node->parent == node;
-}
-
-static inline int prio_tree_left_empty(const struct prio_tree_node *node)
-{
-	return node->left == node;
-}
-
-static inline int prio_tree_right_empty(const struct prio_tree_node *node)
-{
-	return node->right == node;
-}
-
-
-struct prio_tree_node *prio_tree_replace(struct prio_tree_root *root,
-                struct prio_tree_node *old, struct prio_tree_node *node);
-struct prio_tree_node *prio_tree_insert(struct prio_tree_root *root,
-                struct prio_tree_node *node);
-void prio_tree_remove(struct prio_tree_root *root, struct prio_tree_node *node);
-struct prio_tree_node *prio_tree_next(struct prio_tree_iter *iter);
-
-#define raw_prio_tree_replace(root, old, node) \
-	prio_tree_replace(root, (struct prio_tree_node *) (old), \
-	    (struct prio_tree_node *) (node))
-#define raw_prio_tree_insert(root, node) \
-	prio_tree_insert(root, (struct prio_tree_node *) (node))
-#define raw_prio_tree_remove(root, node) \
-	prio_tree_remove(root, (struct prio_tree_node *) (node))
-
-#endif /* _LINUX_PRIO_TREE_H */
diff --git a/ANDROID_3.4.5/include/linux/proc_fs.h b/ANDROID_3.4.5/include/linux/proc_fs.h
deleted file mode 100644
index 85c50730..00000000
--- a/ANDROID_3.4.5/include/linux/proc_fs.h
+++ /dev/null
@@ -1,293 +0,0 @@
-#ifndef _LINUX_PROC_FS_H
-#define _LINUX_PROC_FS_H
-
-#include <linux/slab.h>
-#include <linux/fs.h>
-#include <linux/spinlock.h>
-#include <linux/magic.h>
-#include <linux/atomic.h>
-
-struct net;
-struct completion;
-struct mm_struct;
-
-/*
- * The proc filesystem constants/structures
- */
-
-/*
- * Offset of the first process in the /proc root directory..
- */
-#define FIRST_PROCESS_ENTRY 256
-
-/* Worst case buffer size needed for holding an integer. */
-#define PROC_NUMBUF 13
-
-/*
- * We always define these enumerators
- */
-
-enum {
-	PROC_ROOT_INO = 1,
-};
-
-/*
- * This is not completely implemented yet. The idea is to
- * create an in-memory tree (like the actual /proc filesystem
- * tree) of these proc_dir_entries, so that we can dynamically
- * add new files to /proc.
- *
- * The "next" pointer creates a linked list of one /proc directory,
- * while parent/subdir create the directory structure (every
- * /proc file has a parent, but "subdir" is NULL for all
- * non-directory entries).
- */
-
-typedef	int (read_proc_t)(char *page, char **start, off_t off,
-			  int count, int *eof, void *data);
-typedef	int (write_proc_t)(struct file *file, const char __user *buffer,
-			   unsigned long count, void *data);
-
-struct proc_dir_entry {
-	unsigned int low_ino;
-	umode_t mode;
-	nlink_t nlink;
-	uid_t uid;
-	gid_t gid;
-	loff_t size;
-	const struct inode_operations *proc_iops;
-	/*
-	 * NULL ->proc_fops means "PDE is going away RSN" or
-	 * "PDE is just created". In either case, e.g. ->read_proc won't be
-	 * called because it's too late or too early, respectively.
-	 *
-	 * If you're allocating ->proc_fops dynamically, save a pointer
-	 * somewhere.
-	 */
-	const struct file_operations *proc_fops;
-	struct proc_dir_entry *next, *parent, *subdir;
-	void *data;
-	read_proc_t *read_proc;
-	write_proc_t *write_proc;
-	atomic_t count;		/* use count */
-	int pde_users;	/* number of callers into module in progress */
-	struct completion *pde_unload_completion;
-	struct list_head pde_openers;	/* who did ->open, but not ->release */
-	spinlock_t pde_unload_lock; /* proc_fops checks and pde_users bumps */
-	u8 namelen;
-	char name[];
-};
-
-enum kcore_type {
-	KCORE_TEXT,
-	KCORE_VMALLOC,
-	KCORE_RAM,
-	KCORE_VMEMMAP,
-	KCORE_OTHER,
-};
-
-struct kcore_list {
-	struct list_head list;
-	unsigned long addr;
-	size_t size;
-	int type;
-};
-
-struct vmcore {
-	struct list_head list;
-	unsigned long long paddr;
-	unsigned long long size;
-	loff_t offset;
-};
-
-#ifdef CONFIG_PROC_FS
-
-extern void proc_root_init(void);
-
-void proc_flush_task(struct task_struct *task);
-
-extern struct proc_dir_entry *create_proc_entry(const char *name, umode_t mode,
-						struct proc_dir_entry *parent);
-struct proc_dir_entry *proc_create_data(const char *name, umode_t mode,
-				struct proc_dir_entry *parent,
-				const struct file_operations *proc_fops,
-				void *data);
-extern void remove_proc_entry(const char *name, struct proc_dir_entry *parent);
-
-struct pid_namespace;
-
-extern int pid_ns_prepare_proc(struct pid_namespace *ns);
-extern void pid_ns_release_proc(struct pid_namespace *ns);
-
-/*
- * proc_tty.c
- */
-struct tty_driver;
-extern void proc_tty_init(void);
-extern void proc_tty_register_driver(struct tty_driver *driver);
-extern void proc_tty_unregister_driver(struct tty_driver *driver);
-
-/*
- * proc_devtree.c
- */
-#ifdef CONFIG_PROC_DEVICETREE
-struct device_node;
-struct property;
-extern void proc_device_tree_init(void);
-extern void proc_device_tree_add_node(struct device_node *, struct proc_dir_entry *);
-extern void proc_device_tree_add_prop(struct proc_dir_entry *pde, struct property *prop);
-extern void proc_device_tree_remove_prop(struct proc_dir_entry *pde,
-					 struct property *prop);
-extern void proc_device_tree_update_prop(struct proc_dir_entry *pde,
-					 struct property *newprop,
-					 struct property *oldprop);
-#endif /* CONFIG_PROC_DEVICETREE */
-
-extern struct proc_dir_entry *proc_symlink(const char *,
-		struct proc_dir_entry *, const char *);
-extern struct proc_dir_entry *proc_mkdir(const char *,struct proc_dir_entry *);
-extern struct proc_dir_entry *proc_mkdir_mode(const char *name, umode_t mode,
-			struct proc_dir_entry *parent);
-
-static inline struct proc_dir_entry *proc_create(const char *name, umode_t mode,
-	struct proc_dir_entry *parent, const struct file_operations *proc_fops)
-{
-	return proc_create_data(name, mode, parent, proc_fops, NULL);
-}
-
-static inline struct proc_dir_entry *create_proc_read_entry(const char *name,
-	umode_t mode, struct proc_dir_entry *base, 
-	read_proc_t *read_proc, void * data)
-{
-	struct proc_dir_entry *res=create_proc_entry(name,mode,base);
-	if (res) {
-		res->read_proc=read_proc;
-		res->data=data;
-	}
-	return res;
-}
- 
-extern struct proc_dir_entry *proc_net_fops_create(struct net *net,
-	const char *name, umode_t mode, const struct file_operations *fops);
-extern void proc_net_remove(struct net *net, const char *name);
-extern struct proc_dir_entry *proc_net_mkdir(struct net *net, const char *name,
-	struct proc_dir_entry *parent);
-
-extern struct file *proc_ns_fget(int fd);
-
-#else
-
-#define proc_net_fops_create(net, name, mode, fops)  ({ (void)(mode), NULL; })
-static inline void proc_net_remove(struct net *net, const char *name) {}
-
-static inline void proc_flush_task(struct task_struct *task)
-{
-}
-
-static inline struct proc_dir_entry *create_proc_entry(const char *name,
-	umode_t mode, struct proc_dir_entry *parent) { return NULL; }
-static inline struct proc_dir_entry *proc_create(const char *name,
-	umode_t mode, struct proc_dir_entry *parent,
-	const struct file_operations *proc_fops)
-{
-	return NULL;
-}
-static inline struct proc_dir_entry *proc_create_data(const char *name,
-	umode_t mode, struct proc_dir_entry *parent,
-	const struct file_operations *proc_fops, void *data)
-{
-	return NULL;
-}
-#define remove_proc_entry(name, parent) do {} while (0)
-
-static inline struct proc_dir_entry *proc_symlink(const char *name,
-		struct proc_dir_entry *parent,const char *dest) {return NULL;}
-static inline struct proc_dir_entry *proc_mkdir(const char *name,
-	struct proc_dir_entry *parent) {return NULL;}
-static inline struct proc_dir_entry *proc_mkdir_mode(const char *name,
-	umode_t mode, struct proc_dir_entry *parent) { return NULL; }
-
-static inline struct proc_dir_entry *create_proc_read_entry(const char *name,
-	umode_t mode, struct proc_dir_entry *base, 
-	read_proc_t *read_proc, void * data) { return NULL; }
-
-struct tty_driver;
-static inline void proc_tty_register_driver(struct tty_driver *driver) {};
-static inline void proc_tty_unregister_driver(struct tty_driver *driver) {};
-
-static inline int pid_ns_prepare_proc(struct pid_namespace *ns)
-{
-	return 0;
-}
-
-static inline void pid_ns_release_proc(struct pid_namespace *ns)
-{
-}
-
-static inline struct file *proc_ns_fget(int fd)
-{
-	return ERR_PTR(-EINVAL);
-}
-
-#endif /* CONFIG_PROC_FS */
-
-#if !defined(CONFIG_PROC_KCORE)
-static inline void
-kclist_add(struct kcore_list *new, void *addr, size_t size, int type)
-{
-}
-#else
-extern void kclist_add(struct kcore_list *, void *, size_t, int type);
-#endif
-
-struct nsproxy;
-struct proc_ns_operations {
-	const char *name;
-	int type;
-	void *(*get)(struct task_struct *task);
-	void (*put)(void *ns);
-	int (*install)(struct nsproxy *nsproxy, void *ns);
-};
-extern const struct proc_ns_operations netns_operations;
-extern const struct proc_ns_operations utsns_operations;
-extern const struct proc_ns_operations ipcns_operations;
-
-union proc_op {
-	int (*proc_get_link)(struct dentry *, struct path *);
-	int (*proc_read)(struct task_struct *task, char *page);
-	int (*proc_show)(struct seq_file *m,
-		struct pid_namespace *ns, struct pid *pid,
-		struct task_struct *task);
-};
-
-struct ctl_table_header;
-struct ctl_table;
-
-struct proc_inode {
-	struct pid *pid;
-	int fd;
-	union proc_op op;
-	struct proc_dir_entry *pde;
-	struct ctl_table_header *sysctl;
-	struct ctl_table *sysctl_entry;
-	void *ns;
-	const struct proc_ns_operations *ns_ops;
-	struct inode vfs_inode;
-};
-
-static inline struct proc_inode *PROC_I(const struct inode *inode)
-{
-	return container_of(inode, struct proc_inode, vfs_inode);
-}
-
-static inline struct proc_dir_entry *PDE(const struct inode *inode)
-{
-	return PROC_I(inode)->pde;
-}
-
-static inline struct net *PDE_NET(struct proc_dir_entry *pde)
-{
-	return pde->parent->data;
-}
-
-#endif /* _LINUX_PROC_FS_H */
diff --git a/ANDROID_3.4.5/include/linux/profile.h b/ANDROID_3.4.5/include/linux/profile.h
deleted file mode 100644
index a0fc3227..00000000
--- a/ANDROID_3.4.5/include/linux/profile.h
+++ /dev/null
@@ -1,150 +0,0 @@
-#ifndef _LINUX_PROFILE_H
-#define _LINUX_PROFILE_H
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/cpumask.h>
-#include <linux/cache.h>
-
-#include <asm/errno.h>
-
-#define CPU_PROFILING	1
-#define SCHED_PROFILING	2
-#define SLEEP_PROFILING	3
-#define KVM_PROFILING	4
-
-struct proc_dir_entry;
-struct pt_regs;
-struct notifier_block;
-
-#if defined(CONFIG_PROFILING) && defined(CONFIG_PROC_FS)
-void create_prof_cpu_mask(struct proc_dir_entry *de);
-int create_proc_profile(void);
-#else
-static inline void create_prof_cpu_mask(struct proc_dir_entry *de)
-{
-}
-
-static inline int create_proc_profile(void)
-{
-	return 0;
-}
-#endif
-
-enum profile_type {
-	PROFILE_TASK_EXIT,
-	PROFILE_MUNMAP
-};
-
-#ifdef CONFIG_PROFILING
-
-extern int prof_on __read_mostly;
-
-/* init basic kernel profiler */
-int profile_init(void);
-int profile_setup(char *str);
-void profile_tick(int type);
-
-/*
- * Add multiple profiler hits to a given address:
- */
-void profile_hits(int type, void *ip, unsigned int nr_hits);
-
-/*
- * Single profiler hit:
- */
-static inline void profile_hit(int type, void *ip)
-{
-	/*
-	 * Speedup for the common (no profiling enabled) case:
-	 */
-	if (unlikely(prof_on == type))
-		profile_hits(type, ip, 1);
-}
-
-struct task_struct;
-struct mm_struct;
-
-/* task is in do_exit() */
-void profile_task_exit(struct task_struct * task);
-
-/* task is dead, free task struct ? Returns 1 if
- * the task was taken, 0 if the task should be freed.
- */
-int profile_handoff_task(struct task_struct * task);
-
-/* sys_munmap */
-void profile_munmap(unsigned long addr);
-
-int task_handoff_register(struct notifier_block * n);
-int task_handoff_unregister(struct notifier_block * n);
-
-int profile_event_register(enum profile_type, struct notifier_block * n);
-int profile_event_unregister(enum profile_type, struct notifier_block * n);
-
-int register_timer_hook(int (*hook)(struct pt_regs *));
-void unregister_timer_hook(int (*hook)(struct pt_regs *));
-
-struct pt_regs;
-
-#else
-
-#define prof_on 0
-
-static inline int profile_init(void)
-{
-	return 0;
-}
-
-static inline void profile_tick(int type)
-{
-	return;
-}
-
-static inline void profile_hits(int type, void *ip, unsigned int nr_hits)
-{
-	return;
-}
-
-static inline void profile_hit(int type, void *ip)
-{
-	return;
-}
-
-static inline int task_handoff_register(struct notifier_block * n)
-{
-	return -ENOSYS;
-}
-
-static inline int task_handoff_unregister(struct notifier_block * n)
-{
-	return -ENOSYS;
-}
-
-static inline int profile_event_register(enum profile_type t, struct notifier_block * n)
-{
-	return -ENOSYS;
-}
-
-static inline int profile_event_unregister(enum profile_type t, struct notifier_block * n)
-{
-	return -ENOSYS;
-}
-
-#define profile_task_exit(a) do { } while (0)
-#define profile_handoff_task(a) (0)
-#define profile_munmap(a) do { } while (0)
-
-static inline int register_timer_hook(int (*hook)(struct pt_regs *))
-{
-	return -ENOSYS;
-}
-
-static inline void unregister_timer_hook(int (*hook)(struct pt_regs *))
-{
-	return;
-}
-
-#endif /* CONFIG_PROFILING */
-
-#endif /* _LINUX_PROFILE_H */
diff --git a/ANDROID_3.4.5/include/linux/proportions.h b/ANDROID_3.4.5/include/linux/proportions.h
deleted file mode 100644
index 26a8a4ed..00000000
--- a/ANDROID_3.4.5/include/linux/proportions.h
+++ /dev/null
@@ -1,136 +0,0 @@
-/*
- * FLoating proportions
- *
- *  Copyright (C) 2007 Red Hat, Inc., Peter Zijlstra <pzijlstr@redhat.com>
- *
- * This file contains the public data structure and API definitions.
- */
-
-#ifndef _LINUX_PROPORTIONS_H
-#define _LINUX_PROPORTIONS_H
-
-#include <linux/percpu_counter.h>
-#include <linux/spinlock.h>
-#include <linux/mutex.h>
-
-struct prop_global {
-	/*
-	 * The period over which we differentiate
-	 *
-	 *   period = 2^shift
-	 */
-	int shift;
-	/*
-	 * The total event counter aka 'time'.
-	 *
-	 * Treated as an unsigned long; the lower 'shift - 1' bits are the
-	 * counter bits, the remaining upper bits the period counter.
-	 */
-	struct percpu_counter events;
-};
-
-/*
- * global proportion descriptor
- *
- * this is needed to consitently flip prop_global structures.
- */
-struct prop_descriptor {
-	int index;
-	struct prop_global pg[2];
-	struct mutex mutex;		/* serialize the prop_global switch */
-};
-
-int prop_descriptor_init(struct prop_descriptor *pd, int shift);
-void prop_change_shift(struct prop_descriptor *pd, int new_shift);
-
-/*
- * ----- PERCPU ------
- */
-
-struct prop_local_percpu {
-	/*
-	 * the local events counter
-	 */
-	struct percpu_counter events;
-
-	/*
-	 * snapshot of the last seen global state
-	 */
-	int shift;
-	unsigned long period;
-	raw_spinlock_t lock;		/* protect the snapshot state */
-};
-
-int prop_local_init_percpu(struct prop_local_percpu *pl);
-void prop_local_destroy_percpu(struct prop_local_percpu *pl);
-void __prop_inc_percpu(struct prop_descriptor *pd, struct prop_local_percpu *pl);
-void prop_fraction_percpu(struct prop_descriptor *pd, struct prop_local_percpu *pl,
-		long *numerator, long *denominator);
-
-static inline
-void prop_inc_percpu(struct prop_descriptor *pd, struct prop_local_percpu *pl)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-	__prop_inc_percpu(pd, pl);
-	local_irq_restore(flags);
-}
-
-/*
- * Limit the time part in order to ensure there are some bits left for the
- * cycle counter and fraction multiply.
- */
-#if BITS_PER_LONG == 32
-#define PROP_MAX_SHIFT (3*BITS_PER_LONG/4)
-#else
-#define PROP_MAX_SHIFT (BITS_PER_LONG/2)
-#endif
-
-#define PROP_FRAC_SHIFT		(BITS_PER_LONG - PROP_MAX_SHIFT - 1)
-#define PROP_FRAC_BASE		(1UL << PROP_FRAC_SHIFT)
-
-void __prop_inc_percpu_max(struct prop_descriptor *pd,
-			   struct prop_local_percpu *pl, long frac);
-
-
-/*
- * ----- SINGLE ------
- */
-
-struct prop_local_single {
-	/*
-	 * the local events counter
-	 */
-	unsigned long events;
-
-	/*
-	 * snapshot of the last seen global state
-	 * and a lock protecting this state
-	 */
-	unsigned long period;
-	int shift;
-	raw_spinlock_t lock;		/* protect the snapshot state */
-};
-
-#define INIT_PROP_LOCAL_SINGLE(name)			\
-{	.lock = __RAW_SPIN_LOCK_UNLOCKED(name.lock),	\
-}
-
-int prop_local_init_single(struct prop_local_single *pl);
-void prop_local_destroy_single(struct prop_local_single *pl);
-void __prop_inc_single(struct prop_descriptor *pd, struct prop_local_single *pl);
-void prop_fraction_single(struct prop_descriptor *pd, struct prop_local_single *pl,
-		long *numerator, long *denominator);
-
-static inline
-void prop_inc_single(struct prop_descriptor *pd, struct prop_local_single *pl)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-	__prop_inc_single(pd, pl);
-	local_irq_restore(flags);
-}
-
-#endif /* _LINUX_PROPORTIONS_H */
diff --git a/ANDROID_3.4.5/include/linux/pstore.h b/ANDROID_3.4.5/include/linux/pstore.h
deleted file mode 100644
index e1461e14..00000000
--- a/ANDROID_3.4.5/include/linux/pstore.h
+++ /dev/null
@@ -1,65 +0,0 @@
-/*
- * Persistent Storage - pstore.h
- *
- * Copyright (C) 2010 Intel Corporation <tony.luck@intel.com>
- *
- * This code is the generic layer to export data records from platform
- * level persistent storage via a file system.
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef _LINUX_PSTORE_H
-#define _LINUX_PSTORE_H
-
-#include <linux/time.h>
-#include <linux/kmsg_dump.h>
-
-/* types */
-enum pstore_type_id {
-	PSTORE_TYPE_DMESG	= 0,
-	PSTORE_TYPE_MCE		= 1,
-	PSTORE_TYPE_UNKNOWN	= 255
-};
-
-struct pstore_info {
-	struct module	*owner;
-	char		*name;
-	spinlock_t	buf_lock;	/* serialize access to 'buf' */
-	char		*buf;
-	size_t		bufsize;
-	struct mutex	read_mutex;	/* serialize open/read/close */
-	int		(*open)(struct pstore_info *psi);
-	int		(*close)(struct pstore_info *psi);
-	ssize_t		(*read)(u64 *id, enum pstore_type_id *type,
-			struct timespec *time, char **buf,
-			struct pstore_info *psi);
-	int		(*write)(enum pstore_type_id type,
-			enum kmsg_dump_reason reason, u64 *id,
-			unsigned int part, size_t size, struct pstore_info *psi);
-	int		(*erase)(enum pstore_type_id type, u64 id,
-			struct pstore_info *psi);
-	void		*data;
-};
-
-#ifdef CONFIG_PSTORE
-extern int pstore_register(struct pstore_info *);
-#else
-static inline int
-pstore_register(struct pstore_info *psi)
-{
-	return -ENODEV;
-}
-#endif
-
-#endif /*_LINUX_PSTORE_H*/
diff --git a/ANDROID_3.4.5/include/linux/pti.h b/ANDROID_3.4.5/include/linux/pti.h
deleted file mode 100644
index b3ea01a3..00000000
--- a/ANDROID_3.4.5/include/linux/pti.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- *  Copyright (C) Intel 2011
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- *
- * The PTI (Parallel Trace Interface) driver directs trace data routed from
- * various parts in the system out through the Intel Penwell PTI port and
- * out of the mobile device for analysis with a debugging tool
- * (Lauterbach, Fido). This is part of a solution for the MIPI P1149.7,
- * compact JTAG, standard.
- *
- * This header file will allow other parts of the OS to use the
- * interface to write out it's contents for debugging a mobile system.
- */
-
-#ifndef PTI_H_
-#define PTI_H_
-
-/* offset for last dword of any PTI message. Part of MIPI P1149.7 */
-#define PTI_LASTDWORD_DTS	0x30
-
-/* basic structure used as a write address to the PTI HW */
-struct pti_masterchannel {
-	u8 master;
-	u8 channel;
-};
-
-/* the following functions are defined in misc/pti.c */
-void pti_writedata(struct pti_masterchannel *mc, u8 *buf, int count);
-struct pti_masterchannel *pti_request_masterchannel(u8 type,
-						    const char *thread_name);
-void pti_release_masterchannel(struct pti_masterchannel *mc);
-
-#endif /*PTI_H_*/
diff --git a/ANDROID_3.4.5/include/linux/ptp_classify.h b/ANDROID_3.4.5/include/linux/ptp_classify.h
deleted file mode 100644
index 1dc420ba..00000000
--- a/ANDROID_3.4.5/include/linux/ptp_classify.h
+++ /dev/null
@@ -1,140 +0,0 @@
-/*
- * PTP 1588 support
- *
- * This file implements a BPF that recognizes PTP event messages.
- *
- * Copyright (C) 2010 OMICRON electronics GmbH
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef _PTP_CLASSIFY_H_
-#define _PTP_CLASSIFY_H_
-
-#include <linux/if_ether.h>
-#include <linux/if_vlan.h>
-#include <linux/ip.h>
-#include <linux/filter.h>
-#ifdef __KERNEL__
-#include <linux/in.h>
-#else
-#include <netinet/in.h>
-#endif
-
-#define PTP_CLASS_NONE  0x00 /* not a PTP event message */
-#define PTP_CLASS_V1    0x01 /* protocol version 1 */
-#define PTP_CLASS_V2    0x02 /* protocol version 2 */
-#define PTP_CLASS_VMASK 0x0f /* max protocol version is 15 */
-#define PTP_CLASS_IPV4  0x10 /* event in an IPV4 UDP packet */
-#define PTP_CLASS_IPV6  0x20 /* event in an IPV6 UDP packet */
-#define PTP_CLASS_L2    0x30 /* event in a L2 packet */
-#define PTP_CLASS_VLAN  0x40 /* event in a VLAN tagged L2 packet */
-#define PTP_CLASS_PMASK 0xf0 /* mask for the packet type field */
-
-#define PTP_CLASS_V1_IPV4 (PTP_CLASS_V1 | PTP_CLASS_IPV4)
-#define PTP_CLASS_V1_IPV6 (PTP_CLASS_V1 | PTP_CLASS_IPV6) /*probably DNE*/
-#define PTP_CLASS_V2_IPV4 (PTP_CLASS_V2 | PTP_CLASS_IPV4)
-#define PTP_CLASS_V2_IPV6 (PTP_CLASS_V2 | PTP_CLASS_IPV6)
-#define PTP_CLASS_V2_L2   (PTP_CLASS_V2 | PTP_CLASS_L2)
-#define PTP_CLASS_V2_VLAN (PTP_CLASS_V2 | PTP_CLASS_VLAN)
-
-#define PTP_EV_PORT 319
-#define PTP_GEN_BIT 0x08 /* indicates general message, if set in message type */
-
-#define OFF_ETYPE	12
-#define OFF_IHL		14
-#define OFF_FRAG	20
-#define OFF_PROTO4	23
-#define OFF_NEXT	6
-#define OFF_UDP_DST	2
-
-#define OFF_PTP_SOURCE_UUID	22 /* PTPv1 only */
-#define OFF_PTP_SEQUENCE_ID	30
-#define OFF_PTP_CONTROL		32 /* PTPv1 only */
-
-#define IPV4_HLEN(data) (((struct iphdr *)(data + OFF_IHL))->ihl << 2)
-
-#define IP6_HLEN	40
-#define UDP_HLEN	8
-
-#define RELOFF_DST4	(ETH_HLEN + OFF_UDP_DST)
-#define OFF_DST6	(ETH_HLEN + IP6_HLEN + OFF_UDP_DST)
-#define OFF_PTP6	(ETH_HLEN + IP6_HLEN + UDP_HLEN)
-
-#define OP_AND	(BPF_ALU | BPF_AND  | BPF_K)
-#define OP_JEQ	(BPF_JMP | BPF_JEQ  | BPF_K)
-#define OP_JSET	(BPF_JMP | BPF_JSET | BPF_K)
-#define OP_LDB	(BPF_LD  | BPF_B    | BPF_ABS)
-#define OP_LDH	(BPF_LD  | BPF_H    | BPF_ABS)
-#define OP_LDHI	(BPF_LD  | BPF_H    | BPF_IND)
-#define OP_LDX	(BPF_LDX | BPF_B    | BPF_MSH)
-#define OP_OR	(BPF_ALU | BPF_OR   | BPF_K)
-#define OP_RETA	(BPF_RET | BPF_A)
-#define OP_RETK	(BPF_RET | BPF_K)
-
-static inline int ptp_filter_init(struct sock_filter *f, int len)
-{
-	if (OP_LDH == f[0].code)
-		return sk_chk_filter(f, len);
-	else
-		return 0;
-}
-
-#define PTP_FILTER \
-	{OP_LDH,	0,   0, OFF_ETYPE		}, /*              */ \
-	{OP_JEQ,	0,  12, ETH_P_IP		}, /* f goto L20   */ \
-	{OP_LDB,	0,   0, OFF_PROTO4		}, /*              */ \
-	{OP_JEQ,	0,   9, IPPROTO_UDP		}, /* f goto L10   */ \
-	{OP_LDH,	0,   0, OFF_FRAG		}, /*              */ \
-	{OP_JSET,	7,   0, 0x1fff			}, /* t goto L11   */ \
-	{OP_LDX,	0,   0, OFF_IHL			}, /*              */ \
-	{OP_LDHI,	0,   0, RELOFF_DST4		}, /*              */ \
-	{OP_JEQ,	0,   4, PTP_EV_PORT		}, /* f goto L12   */ \
-	{OP_LDHI,	0,   0, ETH_HLEN + UDP_HLEN	}, /*              */ \
-	{OP_AND,	0,   0, PTP_CLASS_VMASK		}, /*              */ \
-	{OP_OR,		0,   0, PTP_CLASS_IPV4		}, /*              */ \
-	{OP_RETA,	0,   0, 0			}, /*              */ \
-/*L1x*/	{OP_RETK,	0,   0, PTP_CLASS_NONE		}, /*              */ \
-/*L20*/	{OP_JEQ,	0,   9, ETH_P_IPV6		}, /* f goto L40   */ \
-	{OP_LDB,	0,   0, ETH_HLEN + OFF_NEXT	}, /*              */ \
-	{OP_JEQ,	0,   6, IPPROTO_UDP		}, /* f goto L30   */ \
-	{OP_LDH,	0,   0, OFF_DST6		}, /*              */ \
-	{OP_JEQ,	0,   4, PTP_EV_PORT		}, /* f goto L31   */ \
-	{OP_LDH,	0,   0, OFF_PTP6		}, /*              */ \
-	{OP_AND,	0,   0, PTP_CLASS_VMASK		}, /*              */ \
-	{OP_OR,		0,   0, PTP_CLASS_IPV6		}, /*              */ \
-	{OP_RETA,	0,   0, 0			}, /*              */ \
-/*L3x*/	{OP_RETK,	0,   0, PTP_CLASS_NONE		}, /*              */ \
-/*L40*/	{OP_JEQ,	0,   9, ETH_P_8021Q		}, /* f goto L50   */ \
-	{OP_LDH,	0,   0, OFF_ETYPE + 4		}, /*              */ \
-	{OP_JEQ,	0,  15, ETH_P_1588		}, /* f goto L60   */ \
-	{OP_LDB,	0,   0, ETH_HLEN + VLAN_HLEN	}, /*              */ \
-	{OP_AND,	0,   0, PTP_GEN_BIT		}, /*              */ \
-	{OP_JEQ,	0,  12, 0			}, /* f goto L6x   */ \
-	{OP_LDH,	0,   0, ETH_HLEN + VLAN_HLEN	}, /*              */ \
-	{OP_AND,	0,   0, PTP_CLASS_VMASK		}, /*              */ \
-	{OP_OR,		0,   0, PTP_CLASS_VLAN		}, /*              */ \
-	{OP_RETA,	0,   0, 0			}, /*              */ \
-/*L50*/	{OP_JEQ,	0,   7, ETH_P_1588		}, /* f goto L61   */ \
-	{OP_LDB,	0,   0, ETH_HLEN		}, /*              */ \
-	{OP_AND,	0,   0, PTP_GEN_BIT		}, /*              */ \
-	{OP_JEQ,	0,   4, 0			}, /* f goto L6x   */ \
-	{OP_LDH,	0,   0, ETH_HLEN		}, /*              */ \
-	{OP_AND,	0,   0, PTP_CLASS_VMASK		}, /*              */ \
-	{OP_OR,		0,   0, PTP_CLASS_L2		}, /*              */ \
-	{OP_RETA,	0,   0, 0			}, /*              */ \
-/*L6x*/	{OP_RETK,	0,   0, PTP_CLASS_NONE		},
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/ptp_clock.h b/ANDROID_3.4.5/include/linux/ptp_clock.h
deleted file mode 100644
index 94e981f8..00000000
--- a/ANDROID_3.4.5/include/linux/ptp_clock.h
+++ /dev/null
@@ -1,84 +0,0 @@
-/*
- * PTP 1588 clock support - user space interface
- *
- * Copyright (C) 2010 OMICRON electronics GmbH
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef _PTP_CLOCK_H_
-#define _PTP_CLOCK_H_
-
-#include <linux/ioctl.h>
-#include <linux/types.h>
-
-/* PTP_xxx bits, for the flags field within the request structures. */
-#define PTP_ENABLE_FEATURE (1<<0)
-#define PTP_RISING_EDGE    (1<<1)
-#define PTP_FALLING_EDGE   (1<<2)
-
-/*
- * struct ptp_clock_time - represents a time value
- *
- * The sign of the seconds field applies to the whole value. The
- * nanoseconds field is always unsigned. The reserved field is
- * included for sub-nanosecond resolution, should the demand for
- * this ever appear.
- *
- */
-struct ptp_clock_time {
-	__s64 sec;  /* seconds */
-	__u32 nsec; /* nanoseconds */
-	__u32 reserved;
-};
-
-struct ptp_clock_caps {
-	int max_adj;   /* Maximum frequency adjustment in parts per billon. */
-	int n_alarm;   /* Number of programmable alarms. */
-	int n_ext_ts;  /* Number of external time stamp channels. */
-	int n_per_out; /* Number of programmable periodic signals. */
-	int pps;       /* Whether the clock supports a PPS callback. */
-	int rsv[15];   /* Reserved for future use. */
-};
-
-struct ptp_extts_request {
-	unsigned int index;  /* Which channel to configure. */
-	unsigned int flags;  /* Bit field for PTP_xxx flags. */
-	unsigned int rsv[2]; /* Reserved for future use. */
-};
-
-struct ptp_perout_request {
-	struct ptp_clock_time start;  /* Absolute start time. */
-	struct ptp_clock_time period; /* Desired period, zero means disable. */
-	unsigned int index;           /* Which channel to configure. */
-	unsigned int flags;           /* Reserved for future use. */
-	unsigned int rsv[4];          /* Reserved for future use. */
-};
-
-#define PTP_CLK_MAGIC '='
-
-#define PTP_CLOCK_GETCAPS  _IOR(PTP_CLK_MAGIC, 1, struct ptp_clock_caps)
-#define PTP_EXTTS_REQUEST  _IOW(PTP_CLK_MAGIC, 2, struct ptp_extts_request)
-#define PTP_PEROUT_REQUEST _IOW(PTP_CLK_MAGIC, 3, struct ptp_perout_request)
-#define PTP_ENABLE_PPS     _IOW(PTP_CLK_MAGIC, 4, int)
-
-struct ptp_extts_event {
-	struct ptp_clock_time t; /* Time event occured. */
-	unsigned int index;      /* Which channel produced the event. */
-	unsigned int flags;      /* Reserved for future use. */
-	unsigned int rsv[2];     /* Reserved for future use. */
-};
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/ptp_clock_kernel.h b/ANDROID_3.4.5/include/linux/ptp_clock_kernel.h
deleted file mode 100644
index dd2e44fb..00000000
--- a/ANDROID_3.4.5/include/linux/ptp_clock_kernel.h
+++ /dev/null
@@ -1,139 +0,0 @@
-/*
- * PTP 1588 clock support
- *
- * Copyright (C) 2010 OMICRON electronics GmbH
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef _PTP_CLOCK_KERNEL_H_
-#define _PTP_CLOCK_KERNEL_H_
-
-#include <linux/ptp_clock.h>
-
-
-struct ptp_clock_request {
-	enum {
-		PTP_CLK_REQ_EXTTS,
-		PTP_CLK_REQ_PEROUT,
-		PTP_CLK_REQ_PPS,
-	} type;
-	union {
-		struct ptp_extts_request extts;
-		struct ptp_perout_request perout;
-	};
-};
-
-/**
- * struct ptp_clock_info - decribes a PTP hardware clock
- *
- * @owner:     The clock driver should set to THIS_MODULE.
- * @name:      A short name to identify the clock.
- * @max_adj:   The maximum possible frequency adjustment, in parts per billon.
- * @n_alarm:   The number of programmable alarms.
- * @n_ext_ts:  The number of external time stamp channels.
- * @n_per_out: The number of programmable periodic signals.
- * @pps:       Indicates whether the clock supports a PPS callback.
- *
- * clock operations
- *
- * @adjfreq:  Adjusts the frequency of the hardware clock.
- *            parameter delta: Desired period change in parts per billion.
- *
- * @adjtime:  Shifts the time of the hardware clock.
- *            parameter delta: Desired change in nanoseconds.
- *
- * @gettime:  Reads the current time from the hardware clock.
- *            parameter ts: Holds the result.
- *
- * @settime:  Set the current time on the hardware clock.
- *            parameter ts: Time value to set.
- *
- * @enable:   Request driver to enable or disable an ancillary feature.
- *            parameter request: Desired resource to enable or disable.
- *            parameter on: Caller passes one to enable or zero to disable.
- *
- * Drivers should embed their ptp_clock_info within a private
- * structure, obtaining a reference to it using container_of().
- *
- * The callbacks must all return zero on success, non-zero otherwise.
- */
-
-struct ptp_clock_info {
-	struct module *owner;
-	char name[16];
-	s32 max_adj;
-	int n_alarm;
-	int n_ext_ts;
-	int n_per_out;
-	int pps;
-	int (*adjfreq)(struct ptp_clock_info *ptp, s32 delta);
-	int (*adjtime)(struct ptp_clock_info *ptp, s64 delta);
-	int (*gettime)(struct ptp_clock_info *ptp, struct timespec *ts);
-	int (*settime)(struct ptp_clock_info *ptp, const struct timespec *ts);
-	int (*enable)(struct ptp_clock_info *ptp,
-		      struct ptp_clock_request *request, int on);
-};
-
-struct ptp_clock;
-
-/**
- * ptp_clock_register() - register a PTP hardware clock driver
- *
- * @info:  Structure describing the new clock.
- */
-
-extern struct ptp_clock *ptp_clock_register(struct ptp_clock_info *info);
-
-/**
- * ptp_clock_unregister() - unregister a PTP hardware clock driver
- *
- * @ptp:  The clock to remove from service.
- */
-
-extern int ptp_clock_unregister(struct ptp_clock *ptp);
-
-
-enum ptp_clock_events {
-	PTP_CLOCK_ALARM,
-	PTP_CLOCK_EXTTS,
-	PTP_CLOCK_PPS,
-};
-
-/**
- * struct ptp_clock_event - decribes a PTP hardware clock event
- *
- * @type:  One of the ptp_clock_events enumeration values.
- * @index: Identifies the source of the event.
- * @timestamp: When the event occured.
- */
-
-struct ptp_clock_event {
-	int type;
-	int index;
-	u64 timestamp;
-};
-
-/**
- * ptp_clock_event() - notify the PTP layer about an event
- *
- * @ptp:    The clock obtained from ptp_clock_register().
- * @event:  Message structure describing the event.
- */
-
-extern void ptp_clock_event(struct ptp_clock *ptp,
-			    struct ptp_clock_event *event);
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/ptrace.h b/ANDROID_3.4.5/include/linux/ptrace.h
deleted file mode 100644
index 5c719627..00000000
--- a/ANDROID_3.4.5/include/linux/ptrace.h
+++ /dev/null
@@ -1,416 +0,0 @@
-#ifndef _LINUX_PTRACE_H
-#define _LINUX_PTRACE_H
-/* ptrace.h */
-/* structs and defines to help the user use the ptrace system call. */
-
-/* has the defines to get at the registers. */
-
-#define PTRACE_TRACEME		   0
-#define PTRACE_PEEKTEXT		   1
-#define PTRACE_PEEKDATA		   2
-#define PTRACE_PEEKUSR		   3
-#define PTRACE_POKETEXT		   4
-#define PTRACE_POKEDATA		   5
-#define PTRACE_POKEUSR		   6
-#define PTRACE_CONT		   7
-#define PTRACE_KILL		   8
-#define PTRACE_SINGLESTEP	   9
-
-#define PTRACE_ATTACH		  16
-#define PTRACE_DETACH		  17
-
-#define PTRACE_SYSCALL		  24
-
-/* 0x4200-0x4300 are reserved for architecture-independent additions.  */
-#define PTRACE_SETOPTIONS	0x4200
-#define PTRACE_GETEVENTMSG	0x4201
-#define PTRACE_GETSIGINFO	0x4202
-#define PTRACE_SETSIGINFO	0x4203
-
-/*
- * Generic ptrace interface that exports the architecture specific regsets
- * using the corresponding NT_* types (which are also used in the core dump).
- * Please note that the NT_PRSTATUS note type in a core dump contains a full
- * 'struct elf_prstatus'. But the user_regset for NT_PRSTATUS contains just the
- * elf_gregset_t that is the pr_reg field of 'struct elf_prstatus'. For all the
- * other user_regset flavors, the user_regset layout and the ELF core dump note
- * payload are exactly the same layout.
- *
- * This interface usage is as follows:
- *	struct iovec iov = { buf, len};
- *
- *	ret = ptrace(PTRACE_GETREGSET/PTRACE_SETREGSET, pid, NT_XXX_TYPE, &iov);
- *
- * On the successful completion, iov.len will be updated by the kernel,
- * specifying how much the kernel has written/read to/from the user's iov.buf.
- */
-#define PTRACE_GETREGSET	0x4204
-#define PTRACE_SETREGSET	0x4205
-
-#define PTRACE_SEIZE		0x4206
-#define PTRACE_INTERRUPT	0x4207
-#define PTRACE_LISTEN		0x4208
-
-/* Wait extended result codes for the above trace options.  */
-#define PTRACE_EVENT_FORK	1
-#define PTRACE_EVENT_VFORK	2
-#define PTRACE_EVENT_CLONE	3
-#define PTRACE_EVENT_EXEC	4
-#define PTRACE_EVENT_VFORK_DONE	5
-#define PTRACE_EVENT_EXIT	6
-/* Extended result codes which enabled by means other than options.  */
-#define PTRACE_EVENT_STOP	128
-
-/* Options set using PTRACE_SETOPTIONS or using PTRACE_SEIZE @data param */
-#define PTRACE_O_TRACESYSGOOD	1
-#define PTRACE_O_TRACEFORK	(1 << PTRACE_EVENT_FORK)
-#define PTRACE_O_TRACEVFORK	(1 << PTRACE_EVENT_VFORK)
-#define PTRACE_O_TRACECLONE	(1 << PTRACE_EVENT_CLONE)
-#define PTRACE_O_TRACEEXEC	(1 << PTRACE_EVENT_EXEC)
-#define PTRACE_O_TRACEVFORKDONE	(1 << PTRACE_EVENT_VFORK_DONE)
-#define PTRACE_O_TRACEEXIT	(1 << PTRACE_EVENT_EXIT)
-
-#define PTRACE_O_MASK		0x0000007f
-
-#include <asm/ptrace.h>
-
-#ifdef __KERNEL__
-/*
- * Ptrace flags
- *
- * The owner ship rules for task->ptrace which holds the ptrace
- * flags is simple.  When a task is running it owns it's task->ptrace
- * flags.  When the a task is stopped the ptracer owns task->ptrace.
- */
-
-#define PT_SEIZED	0x00010000	/* SEIZE used, enable new behavior */
-#define PT_PTRACED	0x00000001
-#define PT_DTRACE	0x00000002	/* delayed trace (used on m68k, i386) */
-#define PT_PTRACE_CAP	0x00000004	/* ptracer can follow suid-exec */
-
-#define PT_OPT_FLAG_SHIFT	3
-/* PT_TRACE_* event enable flags */
-#define PT_EVENT_FLAG(event)	(1 << (PT_OPT_FLAG_SHIFT + (event)))
-#define PT_TRACESYSGOOD		PT_EVENT_FLAG(0)
-#define PT_TRACE_FORK		PT_EVENT_FLAG(PTRACE_EVENT_FORK)
-#define PT_TRACE_VFORK		PT_EVENT_FLAG(PTRACE_EVENT_VFORK)
-#define PT_TRACE_CLONE		PT_EVENT_FLAG(PTRACE_EVENT_CLONE)
-#define PT_TRACE_EXEC		PT_EVENT_FLAG(PTRACE_EVENT_EXEC)
-#define PT_TRACE_VFORK_DONE	PT_EVENT_FLAG(PTRACE_EVENT_VFORK_DONE)
-#define PT_TRACE_EXIT		PT_EVENT_FLAG(PTRACE_EVENT_EXIT)
-
-/* single stepping state bits (used on ARM and PA-RISC) */
-#define PT_SINGLESTEP_BIT	31
-#define PT_SINGLESTEP		(1<<PT_SINGLESTEP_BIT)
-#define PT_BLOCKSTEP_BIT	30
-#define PT_BLOCKSTEP		(1<<PT_BLOCKSTEP_BIT)
-
-#include <linux/compiler.h>		/* For unlikely.  */
-#include <linux/sched.h>		/* For struct task_struct.  */
-#include <linux/err.h>			/* for IS_ERR_VALUE */
-#include <linux/bug.h>			/* For BUG_ON.  */
-
-
-extern long arch_ptrace(struct task_struct *child, long request,
-			unsigned long addr, unsigned long data);
-extern int ptrace_readdata(struct task_struct *tsk, unsigned long src, char __user *dst, int len);
-extern int ptrace_writedata(struct task_struct *tsk, char __user *src, unsigned long dst, int len);
-extern void ptrace_disable(struct task_struct *);
-extern int ptrace_check_attach(struct task_struct *task, bool ignore_state);
-extern int ptrace_request(struct task_struct *child, long request,
-			  unsigned long addr, unsigned long data);
-extern void ptrace_notify(int exit_code);
-extern void __ptrace_link(struct task_struct *child,
-			  struct task_struct *new_parent);
-extern void __ptrace_unlink(struct task_struct *child);
-extern void exit_ptrace(struct task_struct *tracer);
-#define PTRACE_MODE_READ	0x01
-#define PTRACE_MODE_ATTACH	0x02
-#define PTRACE_MODE_NOAUDIT	0x04
-/* Returns 0 on success, -errno on denial. */
-extern int __ptrace_may_access(struct task_struct *task, unsigned int mode);
-/* Returns true on success, false on denial. */
-extern bool ptrace_may_access(struct task_struct *task, unsigned int mode);
-
-static inline int ptrace_reparented(struct task_struct *child)
-{
-	return !same_thread_group(child->real_parent, child->parent);
-}
-
-static inline void ptrace_unlink(struct task_struct *child)
-{
-	if (unlikely(child->ptrace))
-		__ptrace_unlink(child);
-}
-
-int generic_ptrace_peekdata(struct task_struct *tsk, unsigned long addr,
-			    unsigned long data);
-int generic_ptrace_pokedata(struct task_struct *tsk, unsigned long addr,
-			    unsigned long data);
-
-/**
- * ptrace_parent - return the task that is tracing the given task
- * @task: task to consider
- *
- * Returns %NULL if no one is tracing @task, or the &struct task_struct
- * pointer to its tracer.
- *
- * Must called under rcu_read_lock().  The pointer returned might be kept
- * live only by RCU.  During exec, this may be called with task_lock() held
- * on @task, still held from when check_unsafe_exec() was called.
- */
-static inline struct task_struct *ptrace_parent(struct task_struct *task)
-{
-	if (unlikely(task->ptrace))
-		return rcu_dereference(task->parent);
-	return NULL;
-}
-
-/**
- * ptrace_event_enabled - test whether a ptrace event is enabled
- * @task: ptracee of interest
- * @event: %PTRACE_EVENT_* to test
- *
- * Test whether @event is enabled for ptracee @task.
- *
- * Returns %true if @event is enabled, %false otherwise.
- */
-static inline bool ptrace_event_enabled(struct task_struct *task, int event)
-{
-	return task->ptrace & PT_EVENT_FLAG(event);
-}
-
-/**
- * ptrace_event - possibly stop for a ptrace event notification
- * @event:	%PTRACE_EVENT_* value to report
- * @message:	value for %PTRACE_GETEVENTMSG to return
- *
- * Check whether @event is enabled and, if so, report @event and @message
- * to the ptrace parent.
- *
- * Called without locks.
- */
-static inline void ptrace_event(int event, unsigned long message)
-{
-	if (unlikely(ptrace_event_enabled(current, event))) {
-		current->ptrace_message = message;
-		ptrace_notify((event << 8) | SIGTRAP);
-	} else if (event == PTRACE_EVENT_EXEC) {
-		/* legacy EXEC report via SIGTRAP */
-		if ((current->ptrace & (PT_PTRACED|PT_SEIZED)) == PT_PTRACED)
-			send_sig(SIGTRAP, current, 0);
-	}
-}
-
-/**
- * ptrace_init_task - initialize ptrace state for a new child
- * @child:		new child task
- * @ptrace:		true if child should be ptrace'd by parent's tracer
- *
- * This is called immediately after adding @child to its parent's children
- * list.  @ptrace is false in the normal case, and true to ptrace @child.
- *
- * Called with current's siglock and write_lock_irq(&tasklist_lock) held.
- */
-static inline void ptrace_init_task(struct task_struct *child, bool ptrace)
-{
-	INIT_LIST_HEAD(&child->ptrace_entry);
-	INIT_LIST_HEAD(&child->ptraced);
-#ifdef CONFIG_HAVE_HW_BREAKPOINT
-	atomic_set(&child->ptrace_bp_refcnt, 1);
-#endif
-	child->jobctl = 0;
-	child->ptrace = 0;
-	child->parent = child->real_parent;
-
-	if (unlikely(ptrace) && current->ptrace) {
-		child->ptrace = current->ptrace;
-		__ptrace_link(child, current->parent);
-
-		if (child->ptrace & PT_SEIZED)
-			task_set_jobctl_pending(child, JOBCTL_TRAP_STOP);
-		else
-			sigaddset(&child->pending.signal, SIGSTOP);
-
-		set_tsk_thread_flag(child, TIF_SIGPENDING);
-	}
-}
-
-/**
- * ptrace_release_task - final ptrace-related cleanup of a zombie being reaped
- * @task:	task in %EXIT_DEAD state
- *
- * Called with write_lock(&tasklist_lock) held.
- */
-static inline void ptrace_release_task(struct task_struct *task)
-{
-	BUG_ON(!list_empty(&task->ptraced));
-	ptrace_unlink(task);
-	BUG_ON(!list_empty(&task->ptrace_entry));
-}
-
-#ifndef force_successful_syscall_return
-/*
- * System call handlers that, upon successful completion, need to return a
- * negative value should call force_successful_syscall_return() right before
- * returning.  On architectures where the syscall convention provides for a
- * separate error flag (e.g., alpha, ia64, ppc{,64}, sparc{,64}, possibly
- * others), this macro can be used to ensure that the error flag will not get
- * set.  On architectures which do not support a separate error flag, the macro
- * is a no-op and the spurious error condition needs to be filtered out by some
- * other means (e.g., in user-level, by passing an extra argument to the
- * syscall handler, or something along those lines).
- */
-#define force_successful_syscall_return() do { } while (0)
-#endif
-
-#ifndef is_syscall_success
-/*
- * On most systems we can tell if a syscall is a success based on if the retval
- * is an error value.  On some systems like ia64 and powerpc they have different
- * indicators of success/failure and must define their own.
- */
-#define is_syscall_success(regs) (!IS_ERR_VALUE((unsigned long)(regs_return_value(regs))))
-#endif
-
-/*
- * <asm/ptrace.h> should define the following things inside #ifdef __KERNEL__.
- *
- * These do-nothing inlines are used when the arch does not
- * implement single-step.  The kerneldoc comments are here
- * to document the interface for all arch definitions.
- */
-
-#ifndef arch_has_single_step
-/**
- * arch_has_single_step - does this CPU support user-mode single-step?
- *
- * If this is defined, then there must be function declarations or
- * inlines for user_enable_single_step() and user_disable_single_step().
- * arch_has_single_step() should evaluate to nonzero iff the machine
- * supports instruction single-step for user mode.
- * It can be a constant or it can test a CPU feature bit.
- */
-#define arch_has_single_step()		(0)
-
-/**
- * user_enable_single_step - single-step in user-mode task
- * @task: either current or a task stopped in %TASK_TRACED
- *
- * This can only be called when arch_has_single_step() has returned nonzero.
- * Set @task so that when it returns to user mode, it will trap after the
- * next single instruction executes.  If arch_has_block_step() is defined,
- * this must clear the effects of user_enable_block_step() too.
- */
-static inline void user_enable_single_step(struct task_struct *task)
-{
-	BUG();			/* This can never be called.  */
-}
-
-/**
- * user_disable_single_step - cancel user-mode single-step
- * @task: either current or a task stopped in %TASK_TRACED
- *
- * Clear @task of the effects of user_enable_single_step() and
- * user_enable_block_step().  This can be called whether or not either
- * of those was ever called on @task, and even if arch_has_single_step()
- * returned zero.
- */
-static inline void user_disable_single_step(struct task_struct *task)
-{
-}
-#else
-extern void user_enable_single_step(struct task_struct *);
-extern void user_disable_single_step(struct task_struct *);
-#endif	/* arch_has_single_step */
-
-#ifndef arch_has_block_step
-/**
- * arch_has_block_step - does this CPU support user-mode block-step?
- *
- * If this is defined, then there must be a function declaration or inline
- * for user_enable_block_step(), and arch_has_single_step() must be defined
- * too.  arch_has_block_step() should evaluate to nonzero iff the machine
- * supports step-until-branch for user mode.  It can be a constant or it
- * can test a CPU feature bit.
- */
-#define arch_has_block_step()		(0)
-
-/**
- * user_enable_block_step - step until branch in user-mode task
- * @task: either current or a task stopped in %TASK_TRACED
- *
- * This can only be called when arch_has_block_step() has returned nonzero,
- * and will never be called when single-instruction stepping is being used.
- * Set @task so that when it returns to user mode, it will trap after the
- * next branch or trap taken.
- */
-static inline void user_enable_block_step(struct task_struct *task)
-{
-	BUG();			/* This can never be called.  */
-}
-#else
-extern void user_enable_block_step(struct task_struct *);
-#endif	/* arch_has_block_step */
-
-#ifdef ARCH_HAS_USER_SINGLE_STEP_INFO
-extern void user_single_step_siginfo(struct task_struct *tsk,
-				struct pt_regs *regs, siginfo_t *info);
-#else
-static inline void user_single_step_siginfo(struct task_struct *tsk,
-				struct pt_regs *regs, siginfo_t *info)
-{
-	memset(info, 0, sizeof(*info));
-	info->si_signo = SIGTRAP;
-}
-#endif
-
-#ifndef arch_ptrace_stop_needed
-/**
- * arch_ptrace_stop_needed - Decide whether arch_ptrace_stop() should be called
- * @code:	current->exit_code value ptrace will stop with
- * @info:	siginfo_t pointer (or %NULL) for signal ptrace will stop with
- *
- * This is called with the siglock held, to decide whether or not it's
- * necessary to release the siglock and call arch_ptrace_stop() with the
- * same @code and @info arguments.  It can be defined to a constant if
- * arch_ptrace_stop() is never required, or always is.  On machines where
- * this makes sense, it should be defined to a quick test to optimize out
- * calling arch_ptrace_stop() when it would be superfluous.  For example,
- * if the thread has not been back to user mode since the last stop, the
- * thread state might indicate that nothing needs to be done.
- */
-#define arch_ptrace_stop_needed(code, info)	(0)
-#endif
-
-#ifndef arch_ptrace_stop
-/**
- * arch_ptrace_stop - Do machine-specific work before stopping for ptrace
- * @code:	current->exit_code value ptrace will stop with
- * @info:	siginfo_t pointer (or %NULL) for signal ptrace will stop with
- *
- * This is called with no locks held when arch_ptrace_stop_needed() has
- * just returned nonzero.  It is allowed to block, e.g. for user memory
- * access.  The arch can have machine-specific work to be done before
- * ptrace stops.  On ia64, register backing store gets written back to user
- * memory here.  Since this can be costly (requires dropping the siglock),
- * we only do it when the arch requires it for this particular stop, as
- * indicated by arch_ptrace_stop_needed().
- */
-#define arch_ptrace_stop(code, info)		do { } while (0)
-#endif
-
-extern int task_current_syscall(struct task_struct *target, long *callno,
-				unsigned long args[6], unsigned int maxargs,
-				unsigned long *sp, unsigned long *pc);
-
-#ifdef CONFIG_HAVE_HW_BREAKPOINT
-extern int ptrace_get_breakpoints(struct task_struct *tsk);
-extern void ptrace_put_breakpoints(struct task_struct *tsk);
-#else
-static inline void ptrace_put_breakpoints(struct task_struct *tsk) { }
-#endif /* CONFIG_HAVE_HW_BREAKPOINT */
-
-#endif /* __KERNEL */
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/pwm.h b/ANDROID_3.4.5/include/linux/pwm.h
deleted file mode 100644
index 7c775751..00000000
--- a/ANDROID_3.4.5/include/linux/pwm.h
+++ /dev/null
@@ -1,31 +0,0 @@
-#ifndef __LINUX_PWM_H
-#define __LINUX_PWM_H
-
-struct pwm_device;
-
-/*
- * pwm_request - request a PWM device
- */
-struct pwm_device *pwm_request(int pwm_id, const char *label);
-
-/*
- * pwm_free - free a PWM device
- */
-void pwm_free(struct pwm_device *pwm);
-
-/*
- * pwm_config - change a PWM device configuration
- */
-int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns);
-
-/*
- * pwm_enable - start a PWM output toggling
- */
-int pwm_enable(struct pwm_device *pwm);
-
-/*
- * pwm_disable - stop a PWM output toggling
- */
-void pwm_disable(struct pwm_device *pwm);
-
-#endif /* __LINUX_PWM_H */
diff --git a/ANDROID_3.4.5/include/linux/pwm_backlight.h b/ANDROID_3.4.5/include/linux/pwm_backlight.h
deleted file mode 100644
index 412b70c7..00000000
--- a/ANDROID_3.4.5/include/linux/pwm_backlight.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * Generic PWM backlight driver data - see drivers/video/backlight/pwm_bl.c
- */
-#ifndef __LINUX_PWM_BACKLIGHT_H
-#define __LINUX_PWM_BACKLIGHT_H
-
-#include <linux/backlight.h>
-
-struct platform_pwm_backlight_data {
-	int pwm_id;
-	int invert;
-	unsigned int max_brightness;
-	unsigned int dft_brightness;
-	unsigned int lth_brightness;
-	unsigned int hth_brightness;
-	unsigned int pwm_period_ns;
-	int (*init)(struct device *dev);
-	int (*notify)(struct device *dev, int brightness);
-	void (*notify_after)(struct device *dev, int brightness);
-	void (*exit)(struct device *dev);
-	int (*check_fb)(struct device *dev, struct fb_info *info);
-};
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/pxa168_eth.h b/ANDROID_3.4.5/include/linux/pxa168_eth.h
deleted file mode 100644
index 18d75e79..00000000
--- a/ANDROID_3.4.5/include/linux/pxa168_eth.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
- *pxa168 ethernet platform device data definition file.
- */
-#ifndef __LINUX_PXA168_ETH_H
-#define __LINUX_PXA168_ETH_H
-
-struct pxa168_eth_platform_data {
-	int	port_number;
-	int	phy_addr;
-
-	/*
-	 * If speed is 0, then speed and duplex are autonegotiated.
-	 */
-	int	speed;		/* 0, SPEED_10, SPEED_100 */
-	int	duplex;		/* DUPLEX_HALF or DUPLEX_FULL */
-
-	/*
-	 * Override default RX/TX queue sizes if nonzero.
-	 */
-	int	rx_queue_size;
-	int	tx_queue_size;
-
-	/*
-	 * init callback is used for board specific initialization
-	 * e.g on Aspenite its used to initialize the PHY transceiver.
-	 */
-	int (*init)(void);
-};
-
-#endif /* __LINUX_PXA168_ETH_H */
diff --git a/ANDROID_3.4.5/include/linux/pxa2xx_ssp.h b/ANDROID_3.4.5/include/linux/pxa2xx_ssp.h
deleted file mode 100644
index 44835fb3..00000000
--- a/ANDROID_3.4.5/include/linux/pxa2xx_ssp.h
+++ /dev/null
@@ -1,209 +0,0 @@
-/*
- *  pxa2xx_ssp.h
- *
- *  Copyright (C) 2003 Russell King, All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This driver supports the following PXA CPU/SSP ports:-
- *
- *       PXA250     SSP
- *       PXA255     SSP, NSSP
- *       PXA26x     SSP, NSSP, ASSP
- *       PXA27x     SSP1, SSP2, SSP3
- *       PXA3xx     SSP1, SSP2, SSP3, SSP4
- */
-
-#ifndef __LINUX_SSP_H
-#define __LINUX_SSP_H
-
-#include <linux/list.h>
-#include <linux/io.h>
-
-/*
- * SSP Serial Port Registers
- * PXA250, PXA255, PXA26x and PXA27x SSP controllers are all slightly different.
- * PXA255, PXA26x and PXA27x have extra ports, registers and bits.
- */
-
-#define SSCR0		(0x00)  /* SSP Control Register 0 */
-#define SSCR1		(0x04)  /* SSP Control Register 1 */
-#define SSSR		(0x08)  /* SSP Status Register */
-#define SSITR		(0x0C)  /* SSP Interrupt Test Register */
-#define SSDR		(0x10)  /* SSP Data Write/Data Read Register */
-
-#define SSTO		(0x28)  /* SSP Time Out Register */
-#define SSPSP		(0x2C)  /* SSP Programmable Serial Protocol */
-#define SSTSA		(0x30)  /* SSP Tx Timeslot Active */
-#define SSRSA		(0x34)  /* SSP Rx Timeslot Active */
-#define SSTSS		(0x38)  /* SSP Timeslot Status */
-#define SSACD		(0x3C)  /* SSP Audio Clock Divider */
-#define SSACDD		(0x40)	/* SSP Audio Clock Dither Divider */
-
-/* Common PXA2xx bits first */
-#define SSCR0_DSS	(0x0000000f)	/* Data Size Select (mask) */
-#define SSCR0_DataSize(x)  ((x) - 1)	/* Data Size Select [4..16] */
-#define SSCR0_FRF	(0x00000030)	/* FRame Format (mask) */
-#define SSCR0_Motorola	(0x0 << 4)	/* Motorola's Serial Peripheral Interface (SPI) */
-#define SSCR0_TI	(0x1 << 4)	/* Texas Instruments' Synchronous Serial Protocol (SSP) */
-#define SSCR0_National	(0x2 << 4)	/* National Microwire */
-#define SSCR0_ECS	(1 << 6)	/* External clock select */
-#define SSCR0_SSE	(1 << 7)	/* Synchronous Serial Port Enable */
-#define SSCR0_SCR(x)	((x) << 8)	/* Serial Clock Rate (mask) */
-
-/* PXA27x, PXA3xx */
-#define SSCR0_EDSS	(1 << 20)	/* Extended data size select */
-#define SSCR0_NCS	(1 << 21)	/* Network clock select */
-#define SSCR0_RIM	(1 << 22)	/* Receive FIFO overrrun interrupt mask */
-#define SSCR0_TUM	(1 << 23)	/* Transmit FIFO underrun interrupt mask */
-#define SSCR0_FRDC	(0x07000000)	/* Frame rate divider control (mask) */
-#define SSCR0_SlotsPerFrm(x) (((x) - 1) << 24)	/* Time slots per frame [1..8] */
-#define SSCR0_FPCKE	(1 << 29)	/* FIFO packing enable */
-#define SSCR0_ACS	(1 << 30)	/* Audio clock select */
-#define SSCR0_MOD	(1 << 31)	/* Mode (normal or network) */
-
-
-#define SSCR1_RIE	(1 << 0)	/* Receive FIFO Interrupt Enable */
-#define SSCR1_TIE	(1 << 1)	/* Transmit FIFO Interrupt Enable */
-#define SSCR1_LBM	(1 << 2)	/* Loop-Back Mode */
-#define SSCR1_SPO	(1 << 3)	/* Motorola SPI SSPSCLK polarity setting */
-#define SSCR1_SPH	(1 << 4)	/* Motorola SPI SSPSCLK phase setting */
-#define SSCR1_MWDS	(1 << 5)	/* Microwire Transmit Data Size */
-
-#define SSSR_ALT_FRM_MASK	3	/* Masks the SFRM signal number */
-#define SSSR_TNF	(1 << 2)	/* Transmit FIFO Not Full */
-#define SSSR_RNE	(1 << 3)	/* Receive FIFO Not Empty */
-#define SSSR_BSY	(1 << 4)	/* SSP Busy */
-#define SSSR_TFS	(1 << 5)	/* Transmit FIFO Service Request */
-#define SSSR_RFS	(1 << 6)	/* Receive FIFO Service Request */
-#define SSSR_ROR	(1 << 7)	/* Receive FIFO Overrun */
-
-#ifdef CONFIG_ARCH_PXA
-#define RX_THRESH_DFLT	8
-#define TX_THRESH_DFLT	8
-
-#define SSSR_TFL_MASK	(0xf << 8)	/* Transmit FIFO Level mask */
-#define SSSR_RFL_MASK	(0xf << 12)	/* Receive FIFO Level mask */
-
-#define SSCR1_TFT	(0x000003c0)	/* Transmit FIFO Threshold (mask) */
-#define SSCR1_TxTresh(x) (((x) - 1) << 6) /* level [1..16] */
-#define SSCR1_RFT	(0x00003c00)	/* Receive FIFO Threshold (mask) */
-#define SSCR1_RxTresh(x) (((x) - 1) << 10) /* level [1..16] */
-
-#else
-
-#define RX_THRESH_DFLT	2
-#define TX_THRESH_DFLT	2
-
-#define SSSR_TFL_MASK	(0x3 << 8)	/* Transmit FIFO Level mask */
-#define SSSR_RFL_MASK	(0x3 << 12)	/* Receive FIFO Level mask */
-
-#define SSCR1_TFT	(0x000000c0)	/* Transmit FIFO Threshold (mask) */
-#define SSCR1_TxTresh(x) (((x) - 1) << 6) /* level [1..4] */
-#define SSCR1_RFT	(0x00000c00)	/* Receive FIFO Threshold (mask) */
-#define SSCR1_RxTresh(x) (((x) - 1) << 10) /* level [1..4] */
-#endif
-
-/* extra bits in PXA255, PXA26x and PXA27x SSP ports */
-#define SSCR0_TISSP		(1 << 4)	/* TI Sync Serial Protocol */
-#define SSCR0_PSP		(3 << 4)	/* PSP - Programmable Serial Protocol */
-#define SSCR1_TTELP		(1 << 31)	/* TXD Tristate Enable Last Phase */
-#define SSCR1_TTE		(1 << 30)	/* TXD Tristate Enable */
-#define SSCR1_EBCEI		(1 << 29)	/* Enable Bit Count Error interrupt */
-#define SSCR1_SCFR		(1 << 28)	/* Slave Clock free Running */
-#define SSCR1_ECRA		(1 << 27)	/* Enable Clock Request A */
-#define SSCR1_ECRB		(1 << 26)	/* Enable Clock request B */
-#define SSCR1_SCLKDIR		(1 << 25)	/* Serial Bit Rate Clock Direction */
-#define SSCR1_SFRMDIR		(1 << 24)	/* Frame Direction */
-#define SSCR1_RWOT		(1 << 23)	/* Receive Without Transmit */
-#define SSCR1_TRAIL		(1 << 22)	/* Trailing Byte */
-#define SSCR1_TSRE		(1 << 21)	/* Transmit Service Request Enable */
-#define SSCR1_RSRE		(1 << 20)	/* Receive Service Request Enable */
-#define SSCR1_TINTE		(1 << 19)	/* Receiver Time-out Interrupt enable */
-#define SSCR1_PINTE		(1 << 18)	/* Peripheral Trailing Byte Interrupt Enable */
-#define SSCR1_IFS		(1 << 16)	/* Invert Frame Signal */
-#define SSCR1_STRF		(1 << 15)	/* Select FIFO or EFWR */
-#define SSCR1_EFWR		(1 << 14)	/* Enable FIFO Write/Read */
-
-#define SSSR_BCE		(1 << 23)	/* Bit Count Error */
-#define SSSR_CSS		(1 << 22)	/* Clock Synchronisation Status */
-#define SSSR_TUR		(1 << 21)	/* Transmit FIFO Under Run */
-#define SSSR_EOC		(1 << 20)	/* End Of Chain */
-#define SSSR_TINT		(1 << 19)	/* Receiver Time-out Interrupt */
-#define SSSR_PINT		(1 << 18)	/* Peripheral Trailing Byte Interrupt */
-
-
-#define SSPSP_SCMODE(x)		((x) << 0)	/* Serial Bit Rate Clock Mode */
-#define SSPSP_SFRMP		(1 << 2)	/* Serial Frame Polarity */
-#define SSPSP_ETDS		(1 << 3)	/* End of Transfer data State */
-#define SSPSP_STRTDLY(x)	((x) << 4)	/* Start Delay */
-#define SSPSP_DMYSTRT(x)	((x) << 7)	/* Dummy Start */
-#define SSPSP_SFRMDLY(x)	((x) << 9)	/* Serial Frame Delay */
-#define SSPSP_SFRMWDTH(x)	((x) << 16)	/* Serial Frame Width */
-#define SSPSP_DMYSTOP(x)	((x) << 23)	/* Dummy Stop */
-#define SSPSP_FSRT		(1 << 25)	/* Frame Sync Relative Timing */
-
-/* PXA3xx */
-#define SSPSP_EDMYSTRT(x)	((x) << 26)     /* Extended Dummy Start */
-#define SSPSP_EDMYSTOP(x)	((x) << 28)     /* Extended Dummy Stop */
-#define SSPSP_TIMING_MASK	(0x7f8001f0)
-
-#define SSACD_SCDB		(1 << 3)	/* SSPSYSCLK Divider Bypass */
-#define SSACD_ACPS(x)		((x) << 4)	/* Audio clock PLL select */
-#define SSACD_ACDS(x)		((x) << 0)	/* Audio clock divider select */
-#define SSACD_SCDX8		(1 << 7)	/* SYSCLK division ratio select */
-
-enum pxa_ssp_type {
-	SSP_UNDEFINED = 0,
-	PXA25x_SSP,  /* pxa 210, 250, 255, 26x */
-	PXA25x_NSSP, /* pxa 255, 26x (including ASSP) */
-	PXA27x_SSP,
-	PXA168_SSP,
-	CE4100_SSP,
-};
-
-struct ssp_device {
-	struct platform_device *pdev;
-	struct list_head	node;
-
-	struct clk	*clk;
-	void __iomem	*mmio_base;
-	unsigned long	phys_base;
-
-	const char	*label;
-	int		port_id;
-	int		type;
-	int		use_count;
-	int		irq;
-	int		drcmr_rx;
-	int		drcmr_tx;
-};
-
-/**
- * pxa_ssp_write_reg - Write to a SSP register
- *
- * @dev: SSP device to access
- * @reg: Register to write to
- * @val: Value to be written.
- */
-static inline void pxa_ssp_write_reg(struct ssp_device *dev, u32 reg, u32 val)
-{
-	__raw_writel(val, dev->mmio_base + reg);
-}
-
-/**
- * pxa_ssp_read_reg - Read from a SSP register
- *
- * @dev: SSP device to access
- * @reg: Register to read from
- */
-static inline u32 pxa_ssp_read_reg(struct ssp_device *dev, u32 reg)
-{
-	return __raw_readl(dev->mmio_base + reg);
-}
-
-struct ssp_device *pxa_ssp_request(int port, const char *label);
-void pxa_ssp_free(struct ssp_device *);
-#endif
diff --git a/ANDROID_3.4.5/include/linux/qnx4_fs.h b/ANDROID_3.4.5/include/linux/qnx4_fs.h
deleted file mode 100644
index 8b9aee1a..00000000
--- a/ANDROID_3.4.5/include/linux/qnx4_fs.h
+++ /dev/null
@@ -1,88 +0,0 @@
-/*
- *  Name                         : qnx4_fs.h
- *  Author                       : Richard Frowijn
- *  Function                     : qnx4 global filesystem definitions
- *  History                      : 23-03-1998 created
- */
-#ifndef _LINUX_QNX4_FS_H
-#define _LINUX_QNX4_FS_H
-
-#include <linux/types.h>
-#include <linux/qnxtypes.h>
-#include <linux/magic.h>
-
-#define QNX4_ROOT_INO 1
-
-#define QNX4_MAX_XTNTS_PER_XBLK	60
-/* for di_status */
-#define QNX4_FILE_USED          0x01
-#define QNX4_FILE_MODIFIED      0x02
-#define QNX4_FILE_BUSY          0x04
-#define QNX4_FILE_LINK          0x08
-#define QNX4_FILE_INODE         0x10
-#define QNX4_FILE_FSYSCLEAN     0x20
-
-#define QNX4_I_MAP_SLOTS	8
-#define QNX4_Z_MAP_SLOTS	64
-#define QNX4_VALID_FS		0x0001	/* Clean fs. */
-#define QNX4_ERROR_FS		0x0002	/* fs has errors. */
-#define QNX4_BLOCK_SIZE         0x200	/* blocksize of 512 bytes */
-#define QNX4_BLOCK_SIZE_BITS    9	/* blocksize shift */
-#define QNX4_DIR_ENTRY_SIZE     0x040	/* dir entry size of 64 bytes */
-#define QNX4_DIR_ENTRY_SIZE_BITS 6	/* dir entry size shift */
-#define QNX4_XBLK_ENTRY_SIZE    0x200	/* xblk entry size */
-#define QNX4_INODES_PER_BLOCK   0x08	/* 512 / 64 */
-
-/* for filenames */
-#define QNX4_SHORT_NAME_MAX	16
-#define QNX4_NAME_MAX		48
-
-/*
- * This is the original qnx4 inode layout on disk.
- */
-struct qnx4_inode_entry {
-	char		di_fname[QNX4_SHORT_NAME_MAX];
-	qnx4_off_t	di_size;
-	qnx4_xtnt_t	di_first_xtnt;
-	__le32		di_xblk;
-	__le32		di_ftime;
-	__le32		di_mtime;
-	__le32		di_atime;
-	__le32		di_ctime;
-	qnx4_nxtnt_t	di_num_xtnts;
-	qnx4_mode_t	di_mode;
-	qnx4_muid_t	di_uid;
-	qnx4_mgid_t	di_gid;
-	qnx4_nlink_t	di_nlink;
-	__u8		di_zero[4];
-	qnx4_ftype_t	di_type;
-	__u8		di_status;
-};
-
-struct qnx4_link_info {
-	char		dl_fname[QNX4_NAME_MAX];
-	__le32		dl_inode_blk;
-	__u8		dl_inode_ndx;
-	__u8		dl_spare[10];
-	__u8		dl_status;
-};
-
-struct qnx4_xblk {
-	__le32		xblk_next_xblk;
-	__le32		xblk_prev_xblk;
-	__u8		xblk_num_xtnts;
-	__u8		xblk_spare[3];
-	__le32		xblk_num_blocks;
-	qnx4_xtnt_t	xblk_xtnts[QNX4_MAX_XTNTS_PER_XBLK];
-	char		xblk_signature[8];
-	qnx4_xtnt_t	xblk_first_xtnt;
-};
-
-struct qnx4_super_block {
-	struct qnx4_inode_entry RootDir;
-	struct qnx4_inode_entry Inode;
-	struct qnx4_inode_entry Boot;
-	struct qnx4_inode_entry AltBoot;
-};
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/qnx6_fs.h b/ANDROID_3.4.5/include/linux/qnx6_fs.h
deleted file mode 100644
index 26049eab..00000000
--- a/ANDROID_3.4.5/include/linux/qnx6_fs.h
+++ /dev/null
@@ -1,134 +0,0 @@
-/*
- *  Name                 : qnx6_fs.h
- *  Author               : Kai Bankett
- *  Function             : qnx6 global filesystem definitions
- *  History              : 17-01-2012 created
- */
-#ifndef _LINUX_QNX6_FS_H
-#define _LINUX_QNX6_FS_H
-
-#include <linux/types.h>
-#include <linux/magic.h>
-
-#define QNX6_ROOT_INO 1
-
-/* for di_status */
-#define QNX6_FILE_DIRECTORY	0x01
-#define QNX6_FILE_DELETED	0x02
-#define QNX6_FILE_NORMAL	0x03
-
-#define QNX6_SUPERBLOCK_SIZE	0x200	/* superblock always is 512 bytes */
-#define QNX6_SUPERBLOCK_AREA	0x1000	/* area reserved for superblock */
-#define	QNX6_BOOTBLOCK_SIZE	0x2000	/* heading bootblock area */
-#define QNX6_DIR_ENTRY_SIZE	0x20	/* dir entry size of 32 bytes */
-#define QNX6_INODE_SIZE		0x80	/* each inode is 128 bytes */
-#define QNX6_INODE_SIZE_BITS	7	/* inode entry size shift */
-
-#define QNX6_NO_DIRECT_POINTERS	16	/* 16 blockptrs in sbl/inode */
-#define QNX6_PTR_MAX_LEVELS	5	/* maximum indirect levels */
-
-/* for filenames */
-#define QNX6_SHORT_NAME_MAX	27
-#define QNX6_LONG_NAME_MAX	510
-
-/* list of mount options */
-#define QNX6_MOUNT_MMI_FS	0x010000 /* mount as Audi MMI 3G fs */
-
-/*
- * This is the original qnx6 inode layout on disk.
- * Each inode is 128 byte long.
- */
-struct qnx6_inode_entry {
-	__fs64		di_size;
-	__fs32		di_uid;
-	__fs32		di_gid;
-	__fs32		di_ftime;
-	__fs32		di_mtime;
-	__fs32		di_atime;
-	__fs32		di_ctime;
-	__fs16		di_mode;
-	__fs16		di_ext_mode;
-	__fs32		di_block_ptr[QNX6_NO_DIRECT_POINTERS];
-	__u8		di_filelevels;
-	__u8		di_status;
-	__u8		di_unknown2[2];
-	__fs32		di_zero2[6];
-};
-
-/*
- * Each directory entry is maximum 32 bytes long.
- * If more characters or special characters required it is stored
- * in the longfilenames structure.
- */
-struct qnx6_dir_entry {
-	__fs32		de_inode;
-	__u8		de_size;
-	char		de_fname[QNX6_SHORT_NAME_MAX];
-};
-
-/*
- * Longfilename direntries have a different structure
- */
-struct qnx6_long_dir_entry {
-	__fs32		de_inode;
-	__u8		de_size;
-	__u8		de_unknown[3];
-	__fs32		de_long_inode;
-	__fs32		de_checksum;
-};
-
-struct qnx6_long_filename {
-	__fs16		lf_size;
-	__u8		lf_fname[QNX6_LONG_NAME_MAX];
-};
-
-struct qnx6_root_node {
-	__fs64		size;
-	__fs32		ptr[QNX6_NO_DIRECT_POINTERS];
-	__u8		levels;
-	__u8		mode;
-	__u8		spare[6];
-};
-
-struct qnx6_super_block {
-	__fs32		sb_magic;
-	__fs32		sb_checksum;
-	__fs64		sb_serial;
-	__fs32		sb_ctime;	/* time the fs was created */
-	__fs32		sb_atime;	/* last access time */
-	__fs32		sb_flags;
-	__fs16		sb_version1;	/* filesystem version information */
-	__fs16		sb_version2;	/* filesystem version information */
-	__u8		sb_volumeid[16];
-	__fs32		sb_blocksize;
-	__fs32		sb_num_inodes;
-	__fs32		sb_free_inodes;
-	__fs32		sb_num_blocks;
-	__fs32		sb_free_blocks;
-	__fs32		sb_allocgroup;
-	struct qnx6_root_node Inode;
-	struct qnx6_root_node Bitmap;
-	struct qnx6_root_node Longfile;
-	struct qnx6_root_node Unknown;
-};
-
-/* Audi MMI 3G superblock layout is different to plain qnx6 */
-struct qnx6_mmi_super_block {
-	__fs32		sb_magic;
-	__fs32		sb_checksum;
-	__fs64		sb_serial;
-	__u8		sb_spare0[12];
-	__u8		sb_id[12];
-	__fs32		sb_blocksize;
-	__fs32		sb_num_inodes;
-	__fs32		sb_free_inodes;
-	__fs32		sb_num_blocks;
-	__fs32		sb_free_blocks;
-	__u8		sb_spare1[4];
-	struct qnx6_root_node Inode;
-	struct qnx6_root_node Bitmap;
-	struct qnx6_root_node Longfile;
-	struct qnx6_root_node Unknown;
-};
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/qnxtypes.h b/ANDROID_3.4.5/include/linux/qnxtypes.h
deleted file mode 100644
index bebbe5cc..00000000
--- a/ANDROID_3.4.5/include/linux/qnxtypes.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- *  Name                         : qnxtypes.h
- *  Author                       : Richard Frowijn
- *  Function                     : standard qnx types
- *  History                      : 22-03-1998 created
- *
- */
-
-#ifndef _QNX4TYPES_H
-#define _QNX4TYPES_H
-
-#include <linux/types.h>
-
-typedef __le16 qnx4_nxtnt_t;
-typedef __u8  qnx4_ftype_t;
-
-typedef struct {
-	__le32 xtnt_blk;
-	__le32 xtnt_size;
-} qnx4_xtnt_t;
-
-typedef __le16 qnx4_mode_t;
-typedef __le16 qnx4_muid_t;
-typedef __le16 qnx4_mgid_t;
-typedef __le32 qnx4_off_t;
-typedef __le16 qnx4_nlink_t;
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/quicklist.h b/ANDROID_3.4.5/include/linux/quicklist.h
deleted file mode 100644
index bd466439..00000000
--- a/ANDROID_3.4.5/include/linux/quicklist.h
+++ /dev/null
@@ -1,93 +0,0 @@
-#ifndef LINUX_QUICKLIST_H
-#define LINUX_QUICKLIST_H
-/*
- * Fast allocations and disposal of pages. Pages must be in the condition
- * as needed after allocation when they are freed. Per cpu lists of pages
- * are kept that only contain node local pages.
- *
- * (C) 2007, SGI. Christoph Lameter <clameter@sgi.com>
- */
-#include <linux/kernel.h>
-#include <linux/gfp.h>
-#include <linux/percpu.h>
-
-#ifdef CONFIG_QUICKLIST
-
-struct quicklist {
-	void *page;
-	int nr_pages;
-};
-
-DECLARE_PER_CPU(struct quicklist, quicklist)[CONFIG_NR_QUICK];
-
-/*
- * The two key functions quicklist_alloc and quicklist_free are inline so
- * that they may be custom compiled for the platform.
- * Specifying a NULL ctor can remove constructor support. Specifying
- * a constant quicklist allows the determination of the exact address
- * in the per cpu area.
- *
- * The fast patch in quicklist_alloc touched only a per cpu cacheline and
- * the first cacheline of the page itself. There is minmal overhead involved.
- */
-static inline void *quicklist_alloc(int nr, gfp_t flags, void (*ctor)(void *))
-{
-	struct quicklist *q;
-	void **p = NULL;
-
-	q =&get_cpu_var(quicklist)[nr];
-	p = q->page;
-	if (likely(p)) {
-		q->page = p[0];
-		p[0] = NULL;
-		q->nr_pages--;
-	}
-	put_cpu_var(quicklist);
-	if (likely(p))
-		return p;
-
-	p = (void *)__get_free_page(flags | __GFP_ZERO);
-	if (ctor && p)
-		ctor(p);
-	return p;
-}
-
-static inline void __quicklist_free(int nr, void (*dtor)(void *), void *p,
-	struct page *page)
-{
-	struct quicklist *q;
-
-	q = &get_cpu_var(quicklist)[nr];
-	*(void **)p = q->page;
-	q->page = p;
-	q->nr_pages++;
-	put_cpu_var(quicklist);
-}
-
-static inline void quicklist_free(int nr, void (*dtor)(void *), void *pp)
-{
-	__quicklist_free(nr, dtor, pp, virt_to_page(pp));
-}
-
-static inline void quicklist_free_page(int nr, void (*dtor)(void *),
-							struct page *page)
-{
-	__quicklist_free(nr, dtor, page_address(page), page);
-}
-
-void quicklist_trim(int nr, void (*dtor)(void *),
-	unsigned long min_pages, unsigned long max_free);
-
-unsigned long quicklist_total_size(void);
-
-#else
-
-static inline unsigned long quicklist_total_size(void)
-{
-	return 0;
-}
-
-#endif
-
-#endif /* LINUX_QUICKLIST_H */
-
diff --git a/ANDROID_3.4.5/include/linux/quota.h b/ANDROID_3.4.5/include/linux/quota.h
deleted file mode 100644
index c09fa042..00000000
--- a/ANDROID_3.4.5/include/linux/quota.h
+++ /dev/null
@@ -1,423 +0,0 @@
-/*
- * Copyright (c) 1982, 1986 Regents of the University of California.
- * All rights reserved.
- *
- * This code is derived from software contributed to Berkeley by
- * Robert Elz at The University of Melbourne.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-#ifndef _LINUX_QUOTA_
-#define _LINUX_QUOTA_
-
-#include <linux/errno.h>
-#include <linux/types.h>
-
-#define __DQUOT_VERSION__	"dquot_6.5.2"
-
-#define MAXQUOTAS 2
-#define USRQUOTA  0		/* element used for user quotas */
-#define GRPQUOTA  1		/* element used for group quotas */
-
-/*
- * Definitions for the default names of the quotas files.
- */
-#define INITQFNAMES { \
-	"user",    /* USRQUOTA */ \
-	"group",   /* GRPQUOTA */ \
-	"undefined", \
-};
-
-/*
- * Command definitions for the 'quotactl' system call.
- * The commands are broken into a main command defined below
- * and a subcommand that is used to convey the type of
- * quota that is being manipulated (see above).
- */
-#define SUBCMDMASK  0x00ff
-#define SUBCMDSHIFT 8
-#define QCMD(cmd, type)  (((cmd) << SUBCMDSHIFT) | ((type) & SUBCMDMASK))
-
-#define Q_SYNC     0x800001	/* sync disk copy of a filesystems quotas */
-#define Q_QUOTAON  0x800002	/* turn quotas on */
-#define Q_QUOTAOFF 0x800003	/* turn quotas off */
-#define Q_GETFMT   0x800004	/* get quota format used on given filesystem */
-#define Q_GETINFO  0x800005	/* get information about quota files */
-#define Q_SETINFO  0x800006	/* set information about quota files */
-#define Q_GETQUOTA 0x800007	/* get user quota structure */
-#define Q_SETQUOTA 0x800008	/* set user quota structure */
-
-/* Quota format type IDs */
-#define	QFMT_VFS_OLD 1
-#define	QFMT_VFS_V0 2
-#define QFMT_OCFS2 3
-#define	QFMT_VFS_V1 4
-
-/* Size of block in which space limits are passed through the quota
- * interface */
-#define QIF_DQBLKSIZE_BITS 10
-#define QIF_DQBLKSIZE (1 << QIF_DQBLKSIZE_BITS)
-
-/*
- * Quota structure used for communication with userspace via quotactl
- * Following flags are used to specify which fields are valid
- */
-enum {
-	QIF_BLIMITS_B = 0,
-	QIF_SPACE_B,
-	QIF_ILIMITS_B,
-	QIF_INODES_B,
-	QIF_BTIME_B,
-	QIF_ITIME_B,
-};
-
-#define QIF_BLIMITS	(1 << QIF_BLIMITS_B)
-#define QIF_SPACE	(1 << QIF_SPACE_B)
-#define QIF_ILIMITS	(1 << QIF_ILIMITS_B)
-#define QIF_INODES	(1 << QIF_INODES_B)
-#define QIF_BTIME	(1 << QIF_BTIME_B)
-#define QIF_ITIME	(1 << QIF_ITIME_B)
-#define QIF_LIMITS	(QIF_BLIMITS | QIF_ILIMITS)
-#define QIF_USAGE	(QIF_SPACE | QIF_INODES)
-#define QIF_TIMES	(QIF_BTIME | QIF_ITIME)
-#define QIF_ALL		(QIF_LIMITS | QIF_USAGE | QIF_TIMES)
-
-struct if_dqblk {
-	__u64 dqb_bhardlimit;
-	__u64 dqb_bsoftlimit;
-	__u64 dqb_curspace;
-	__u64 dqb_ihardlimit;
-	__u64 dqb_isoftlimit;
-	__u64 dqb_curinodes;
-	__u64 dqb_btime;
-	__u64 dqb_itime;
-	__u32 dqb_valid;
-};
-
-/*
- * Structure used for setting quota information about file via quotactl
- * Following flags are used to specify which fields are valid
- */
-#define IIF_BGRACE	1
-#define IIF_IGRACE	2
-#define IIF_FLAGS	4
-#define IIF_ALL		(IIF_BGRACE | IIF_IGRACE | IIF_FLAGS)
-
-struct if_dqinfo {
-	__u64 dqi_bgrace;
-	__u64 dqi_igrace;
-	__u32 dqi_flags;
-	__u32 dqi_valid;
-};
-
-/*
- * Definitions for quota netlink interface
- */
-#define QUOTA_NL_NOWARN 0
-#define QUOTA_NL_IHARDWARN 1		/* Inode hardlimit reached */
-#define QUOTA_NL_ISOFTLONGWARN 2 	/* Inode grace time expired */
-#define QUOTA_NL_ISOFTWARN 3		/* Inode softlimit reached */
-#define QUOTA_NL_BHARDWARN 4		/* Block hardlimit reached */
-#define QUOTA_NL_BSOFTLONGWARN 5	/* Block grace time expired */
-#define QUOTA_NL_BSOFTWARN 6		/* Block softlimit reached */
-#define QUOTA_NL_IHARDBELOW 7		/* Usage got below inode hardlimit */
-#define QUOTA_NL_ISOFTBELOW 8		/* Usage got below inode softlimit */
-#define QUOTA_NL_BHARDBELOW 9		/* Usage got below block hardlimit */
-#define QUOTA_NL_BSOFTBELOW 10		/* Usage got below block softlimit */
-
-enum {
-	QUOTA_NL_C_UNSPEC,
-	QUOTA_NL_C_WARNING,
-	__QUOTA_NL_C_MAX,
-};
-#define QUOTA_NL_C_MAX (__QUOTA_NL_C_MAX - 1)
-
-enum {
-	QUOTA_NL_A_UNSPEC,
-	QUOTA_NL_A_QTYPE,
-	QUOTA_NL_A_EXCESS_ID,
-	QUOTA_NL_A_WARNING,
-	QUOTA_NL_A_DEV_MAJOR,
-	QUOTA_NL_A_DEV_MINOR,
-	QUOTA_NL_A_CAUSED_ID,
-	__QUOTA_NL_A_MAX,
-};
-#define QUOTA_NL_A_MAX (__QUOTA_NL_A_MAX - 1)
-
-
-#ifdef __KERNEL__
-#include <linux/list.h>
-#include <linux/mutex.h>
-#include <linux/rwsem.h>
-#include <linux/spinlock.h>
-#include <linux/wait.h>
-#include <linux/percpu_counter.h>
-
-#include <linux/dqblk_xfs.h>
-#include <linux/dqblk_v1.h>
-#include <linux/dqblk_v2.h>
-
-#include <linux/atomic.h>
-
-typedef __kernel_uid32_t qid_t; /* Type in which we store ids in memory */
-typedef long long qsize_t;	/* Type in which we store sizes */
-
-extern spinlock_t dq_data_lock;
-
-/* Maximal numbers of writes for quota operation (insert/delete/update)
- * (over VFS all formats) */
-#define DQUOT_INIT_ALLOC max(V1_INIT_ALLOC, V2_INIT_ALLOC)
-#define DQUOT_INIT_REWRITE max(V1_INIT_REWRITE, V2_INIT_REWRITE)
-#define DQUOT_DEL_ALLOC max(V1_DEL_ALLOC, V2_DEL_ALLOC)
-#define DQUOT_DEL_REWRITE max(V1_DEL_REWRITE, V2_DEL_REWRITE)
-
-/*
- * Data for one user/group kept in memory
- */
-struct mem_dqblk {
-	qsize_t dqb_bhardlimit;	/* absolute limit on disk blks alloc */
-	qsize_t dqb_bsoftlimit;	/* preferred limit on disk blks */
-	qsize_t dqb_curspace;	/* current used space */
-	qsize_t dqb_rsvspace;   /* current reserved space for delalloc*/
-	qsize_t dqb_ihardlimit;	/* absolute limit on allocated inodes */
-	qsize_t dqb_isoftlimit;	/* preferred inode limit */
-	qsize_t dqb_curinodes;	/* current # allocated inodes */
-	time_t dqb_btime;	/* time limit for excessive disk use */
-	time_t dqb_itime;	/* time limit for excessive inode use */
-};
-
-/*
- * Data for one quotafile kept in memory
- */
-struct quota_format_type;
-
-struct mem_dqinfo {
-	struct quota_format_type *dqi_format;
-	int dqi_fmt_id;		/* Id of the dqi_format - used when turning
-				 * quotas on after remount RW */
-	struct list_head dqi_dirty_list;	/* List of dirty dquots */
-	unsigned long dqi_flags;
-	unsigned int dqi_bgrace;
-	unsigned int dqi_igrace;
-	qsize_t dqi_maxblimit;
-	qsize_t dqi_maxilimit;
-	void *dqi_priv;
-};
-
-struct super_block;
-
-#define DQF_MASK 0xffff		/* Mask for format specific flags */
-#define DQF_GETINFO_MASK 0x1ffff	/* Mask for flags passed to userspace */
-#define DQF_SETINFO_MASK 0xffff		/* Mask for flags modifiable from userspace */
-#define DQF_SYS_FILE_B		16
-#define DQF_SYS_FILE (1 << DQF_SYS_FILE_B)	/* Quota file stored as system file */
-#define DQF_INFO_DIRTY_B	31
-#define DQF_INFO_DIRTY (1 << DQF_INFO_DIRTY_B)	/* Is info dirty? */
-
-extern void mark_info_dirty(struct super_block *sb, int type);
-static inline int info_dirty(struct mem_dqinfo *info)
-{
-	return test_bit(DQF_INFO_DIRTY_B, &info->dqi_flags);
-}
-
-enum {
-	DQST_LOOKUPS,
-	DQST_DROPS,
-	DQST_READS,
-	DQST_WRITES,
-	DQST_CACHE_HITS,
-	DQST_ALLOC_DQUOTS,
-	DQST_FREE_DQUOTS,
-	DQST_SYNCS,
-	_DQST_DQSTAT_LAST
-};
-
-struct dqstats {
-	int stat[_DQST_DQSTAT_LAST];
-	struct percpu_counter counter[_DQST_DQSTAT_LAST];
-};
-
-extern struct dqstats *dqstats_pcpu;
-extern struct dqstats dqstats;
-
-static inline void dqstats_inc(unsigned int type)
-{
-	percpu_counter_inc(&dqstats.counter[type]);
-}
-
-static inline void dqstats_dec(unsigned int type)
-{
-	percpu_counter_dec(&dqstats.counter[type]);
-}
-
-#define DQ_MOD_B	0	/* dquot modified since read */
-#define DQ_BLKS_B	1	/* uid/gid has been warned about blk limit */
-#define DQ_INODES_B	2	/* uid/gid has been warned about inode limit */
-#define DQ_FAKE_B	3	/* no limits only usage */
-#define DQ_READ_B	4	/* dquot was read into memory */
-#define DQ_ACTIVE_B	5	/* dquot is active (dquot_release not called) */
-#define DQ_LASTSET_B	6	/* Following 6 bits (see QIF_) are reserved\
-				 * for the mask of entries set via SETQUOTA\
-				 * quotactl. They are set under dq_data_lock\
-				 * and the quota format handling dquot can\
-				 * clear them when it sees fit. */
-
-struct dquot {
-	struct hlist_node dq_hash;	/* Hash list in memory */
-	struct list_head dq_inuse;	/* List of all quotas */
-	struct list_head dq_free;	/* Free list element */
-	struct list_head dq_dirty;	/* List of dirty dquots */
-	struct mutex dq_lock;		/* dquot IO lock */
-	atomic_t dq_count;		/* Use count */
-	wait_queue_head_t dq_wait_unused;	/* Wait queue for dquot to become unused */
-	struct super_block *dq_sb;	/* superblock this applies to */
-	unsigned int dq_id;		/* ID this applies to (uid, gid) */
-	loff_t dq_off;			/* Offset of dquot on disk */
-	unsigned long dq_flags;		/* See DQ_* */
-	short dq_type;			/* Type of quota */
-	struct mem_dqblk dq_dqb;	/* Diskquota usage */
-};
-
-/* Operations which must be implemented by each quota format */
-struct quota_format_ops {
-	int (*check_quota_file)(struct super_block *sb, int type);	/* Detect whether file is in our format */
-	int (*read_file_info)(struct super_block *sb, int type);	/* Read main info about file - called on quotaon() */
-	int (*write_file_info)(struct super_block *sb, int type);	/* Write main info about file */
-	int (*free_file_info)(struct super_block *sb, int type);	/* Called on quotaoff() */
-	int (*read_dqblk)(struct dquot *dquot);		/* Read structure for one user */
-	int (*commit_dqblk)(struct dquot *dquot);	/* Write structure for one user */
-	int (*release_dqblk)(struct dquot *dquot);	/* Called when last reference to dquot is being dropped */
-};
-
-/* Operations working with dquots */
-struct dquot_operations {
-	int (*write_dquot) (struct dquot *);		/* Ordinary dquot write */
-	struct dquot *(*alloc_dquot)(struct super_block *, int);	/* Allocate memory for new dquot */
-	void (*destroy_dquot)(struct dquot *);		/* Free memory for dquot */
-	int (*acquire_dquot) (struct dquot *);		/* Quota is going to be created on disk */
-	int (*release_dquot) (struct dquot *);		/* Quota is going to be deleted from disk */
-	int (*mark_dirty) (struct dquot *);		/* Dquot is marked dirty */
-	int (*write_info) (struct super_block *, int);	/* Write of quota "superblock" */
-	/* get reserved quota for delayed alloc, value returned is managed by
-	 * quota code only */
-	qsize_t *(*get_reserved_space) (struct inode *);
-};
-
-struct path;
-
-/* Operations handling requests from userspace */
-struct quotactl_ops {
-	int (*quota_on)(struct super_block *, int, int, struct path *);
-	int (*quota_on_meta)(struct super_block *, int, int);
-	int (*quota_off)(struct super_block *, int);
-	int (*quota_sync)(struct super_block *, int, int);
-	int (*get_info)(struct super_block *, int, struct if_dqinfo *);
-	int (*set_info)(struct super_block *, int, struct if_dqinfo *);
-	int (*get_dqblk)(struct super_block *, int, qid_t, struct fs_disk_quota *);
-	int (*set_dqblk)(struct super_block *, int, qid_t, struct fs_disk_quota *);
-	int (*get_xstate)(struct super_block *, struct fs_quota_stat *);
-	int (*set_xstate)(struct super_block *, unsigned int, int);
-};
-
-struct quota_format_type {
-	int qf_fmt_id;	/* Quota format id */
-	const struct quota_format_ops *qf_ops;	/* Operations of format */
-	struct module *qf_owner;		/* Module implementing quota format */
-	struct quota_format_type *qf_next;
-};
-
-/* Quota state flags - they actually come in two flavors - for users and groups */
-enum {
-	_DQUOT_USAGE_ENABLED = 0,		/* Track disk usage for users */
-	_DQUOT_LIMITS_ENABLED,			/* Enforce quota limits for users */
-	_DQUOT_SUSPENDED,			/* User diskquotas are off, but
-						 * we have necessary info in
-						 * memory to turn them on */
-	_DQUOT_STATE_FLAGS
-};
-#define DQUOT_USAGE_ENABLED	(1 << _DQUOT_USAGE_ENABLED)
-#define DQUOT_LIMITS_ENABLED	(1 << _DQUOT_LIMITS_ENABLED)
-#define DQUOT_SUSPENDED		(1 << _DQUOT_SUSPENDED)
-#define DQUOT_STATE_FLAGS	(DQUOT_USAGE_ENABLED | DQUOT_LIMITS_ENABLED | \
-				 DQUOT_SUSPENDED)
-/* Other quota flags */
-#define DQUOT_STATE_LAST	(_DQUOT_STATE_FLAGS * MAXQUOTAS)
-#define DQUOT_QUOTA_SYS_FILE	(1 << DQUOT_STATE_LAST)
-						/* Quota file is a special
-						 * system file and user cannot
-						 * touch it. Filesystem is
-						 * responsible for setting
-						 * S_NOQUOTA, S_NOATIME flags
-						 */
-#define DQUOT_NEGATIVE_USAGE	(1 << (DQUOT_STATE_LAST + 1))
-					       /* Allow negative quota usage */
-
-static inline unsigned int dquot_state_flag(unsigned int flags, int type)
-{
-	return flags << _DQUOT_STATE_FLAGS * type;
-}
-
-static inline unsigned int dquot_generic_flag(unsigned int flags, int type)
-{
-	return (flags >> _DQUOT_STATE_FLAGS * type) & DQUOT_STATE_FLAGS;
-}
-
-#ifdef CONFIG_QUOTA_NETLINK_INTERFACE
-extern void quota_send_warning(short type, unsigned int id, dev_t dev,
-			       const char warntype);
-#else
-static inline void quota_send_warning(short type, unsigned int id, dev_t dev,
-				      const char warntype)
-{
-	return;
-}
-#endif /* CONFIG_QUOTA_NETLINK_INTERFACE */
-
-struct quota_info {
-	unsigned int flags;			/* Flags for diskquotas on this device */
-	struct mutex dqio_mutex;		/* lock device while I/O in progress */
-	struct mutex dqonoff_mutex;		/* Serialize quotaon & quotaoff */
-	struct rw_semaphore dqptr_sem;		/* serialize ops using quota_info struct, pointers from inode to dquots */
-	struct inode *files[MAXQUOTAS];		/* inodes of quotafiles */
-	struct mem_dqinfo info[MAXQUOTAS];	/* Information for each quota type */
-	const struct quota_format_ops *ops[MAXQUOTAS];	/* Operations for each type */
-};
-
-int register_quota_format(struct quota_format_type *fmt);
-void unregister_quota_format(struct quota_format_type *fmt);
-
-struct quota_module_name {
-	int qm_fmt_id;
-	char *qm_mod_name;
-};
-
-#define INIT_QUOTA_MODULE_NAMES {\
-	{QFMT_VFS_OLD, "quota_v1"},\
-	{QFMT_VFS_V0, "quota_v2"},\
-	{0, NULL}}
-
-#endif /* __KERNEL__ */
-#endif /* _QUOTA_ */
diff --git a/ANDROID_3.4.5/include/linux/quotaops.h b/ANDROID_3.4.5/include/linux/quotaops.h
deleted file mode 100644
index d93f95e6..00000000
--- a/ANDROID_3.4.5/include/linux/quotaops.h
+++ /dev/null
@@ -1,360 +0,0 @@
-/*
- * Definitions for diskquota-operations. When diskquota is configured these
- * macros expand to the right source-code.
- *
- * Author:  Marco van Wieringen <mvw@planets.elm.net>
- */
-#ifndef _LINUX_QUOTAOPS_
-#define _LINUX_QUOTAOPS_
-
-#include <linux/fs.h>
-
-#define DQUOT_SPACE_WARN	0x1
-#define DQUOT_SPACE_RESERVE	0x2
-#define DQUOT_SPACE_NOFAIL	0x4
-
-static inline struct quota_info *sb_dqopt(struct super_block *sb)
-{
-	return &sb->s_dquot;
-}
-
-/* i_mutex must being held */
-static inline bool is_quota_modification(struct inode *inode, struct iattr *ia)
-{
-	return (ia->ia_valid & ATTR_SIZE && ia->ia_size != inode->i_size) ||
-		(ia->ia_valid & ATTR_UID && ia->ia_uid != inode->i_uid) ||
-		(ia->ia_valid & ATTR_GID && ia->ia_gid != inode->i_gid);
-}
-
-#if defined(CONFIG_QUOTA)
-
-#define quota_error(sb, fmt, args...) \
-	__quota_error((sb), __func__, fmt , ## args)
-
-extern __printf(3, 4)
-void __quota_error(struct super_block *sb, const char *func,
-		   const char *fmt, ...);
-
-/*
- * declaration of quota_function calls in kernel.
- */
-void inode_add_rsv_space(struct inode *inode, qsize_t number);
-void inode_claim_rsv_space(struct inode *inode, qsize_t number);
-void inode_sub_rsv_space(struct inode *inode, qsize_t number);
-
-void dquot_initialize(struct inode *inode);
-void dquot_drop(struct inode *inode);
-struct dquot *dqget(struct super_block *sb, unsigned int id, int type);
-void dqput(struct dquot *dquot);
-int dquot_scan_active(struct super_block *sb,
-		      int (*fn)(struct dquot *dquot, unsigned long priv),
-		      unsigned long priv);
-struct dquot *dquot_alloc(struct super_block *sb, int type);
-void dquot_destroy(struct dquot *dquot);
-
-int __dquot_alloc_space(struct inode *inode, qsize_t number, int flags);
-void __dquot_free_space(struct inode *inode, qsize_t number, int flags);
-
-int dquot_alloc_inode(const struct inode *inode);
-
-int dquot_claim_space_nodirty(struct inode *inode, qsize_t number);
-void dquot_free_inode(const struct inode *inode);
-
-int dquot_disable(struct super_block *sb, int type, unsigned int flags);
-/* Suspend quotas on remount RO */
-static inline int dquot_suspend(struct super_block *sb, int type)
-{
-	return dquot_disable(sb, type, DQUOT_SUSPENDED);
-}
-int dquot_resume(struct super_block *sb, int type);
-
-int dquot_commit(struct dquot *dquot);
-int dquot_acquire(struct dquot *dquot);
-int dquot_release(struct dquot *dquot);
-int dquot_commit_info(struct super_block *sb, int type);
-int dquot_mark_dquot_dirty(struct dquot *dquot);
-
-int dquot_file_open(struct inode *inode, struct file *file);
-
-int dquot_enable(struct inode *inode, int type, int format_id,
-	unsigned int flags);
-int dquot_quota_on(struct super_block *sb, int type, int format_id,
- 	struct path *path);
-int dquot_quota_on_mount(struct super_block *sb, char *qf_name,
- 	int format_id, int type);
-int dquot_quota_off(struct super_block *sb, int type);
-int dquot_quota_sync(struct super_block *sb, int type, int wait);
-int dquot_get_dqinfo(struct super_block *sb, int type, struct if_dqinfo *ii);
-int dquot_set_dqinfo(struct super_block *sb, int type, struct if_dqinfo *ii);
-int dquot_get_dqblk(struct super_block *sb, int type, qid_t id,
-		struct fs_disk_quota *di);
-int dquot_set_dqblk(struct super_block *sb, int type, qid_t id,
-		struct fs_disk_quota *di);
-
-int __dquot_transfer(struct inode *inode, struct dquot **transfer_to);
-int dquot_transfer(struct inode *inode, struct iattr *iattr);
-
-static inline struct mem_dqinfo *sb_dqinfo(struct super_block *sb, int type)
-{
-	return sb_dqopt(sb)->info + type;
-}
-
-/*
- * Functions for checking status of quota
- */
-
-static inline bool sb_has_quota_usage_enabled(struct super_block *sb, int type)
-{
-	return sb_dqopt(sb)->flags &
-				dquot_state_flag(DQUOT_USAGE_ENABLED, type);
-}
-
-static inline bool sb_has_quota_limits_enabled(struct super_block *sb, int type)
-{
-	return sb_dqopt(sb)->flags &
-				dquot_state_flag(DQUOT_LIMITS_ENABLED, type);
-}
-
-static inline bool sb_has_quota_suspended(struct super_block *sb, int type)
-{
-	return sb_dqopt(sb)->flags &
-				dquot_state_flag(DQUOT_SUSPENDED, type);
-}
-
-static inline unsigned sb_any_quota_suspended(struct super_block *sb)
-{
-	unsigned type, tmsk = 0;
-	for (type = 0; type < MAXQUOTAS; type++)
-		tmsk |= sb_has_quota_suspended(sb, type) << type;
-	return tmsk;
-}
-
-/* Does kernel know about any quota information for given sb + type? */
-static inline bool sb_has_quota_loaded(struct super_block *sb, int type)
-{
-	/* Currently if anything is on, then quota usage is on as well */
-	return sb_has_quota_usage_enabled(sb, type);
-}
-
-static inline unsigned sb_any_quota_loaded(struct super_block *sb)
-{
-	unsigned type, tmsk = 0;
-	for (type = 0; type < MAXQUOTAS; type++)
-		tmsk |= sb_has_quota_loaded(sb, type) << type;
-	return	tmsk;
-}
-
-static inline bool sb_has_quota_active(struct super_block *sb, int type)
-{
-	return sb_has_quota_loaded(sb, type) &&
-	       !sb_has_quota_suspended(sb, type);
-}
-
-/*
- * Operations supported for diskquotas.
- */
-extern const struct dquot_operations dquot_operations;
-extern const struct quotactl_ops dquot_quotactl_ops;
-
-#else
-
-static inline int sb_has_quota_usage_enabled(struct super_block *sb, int type)
-{
-	return 0;
-}
-
-static inline int sb_has_quota_limits_enabled(struct super_block *sb, int type)
-{
-	return 0;
-}
-
-static inline int sb_has_quota_suspended(struct super_block *sb, int type)
-{
-	return 0;
-}
-
-static inline int sb_any_quota_suspended(struct super_block *sb)
-{
-	return 0;
-}
-
-/* Does kernel know about any quota information for given sb + type? */
-static inline int sb_has_quota_loaded(struct super_block *sb, int type)
-{
-	return 0;
-}
-
-static inline int sb_any_quota_loaded(struct super_block *sb)
-{
-	return 0;
-}
-
-static inline int sb_has_quota_active(struct super_block *sb, int type)
-{
-	return 0;
-}
-
-static inline void dquot_initialize(struct inode *inode)
-{
-}
-
-static inline void dquot_drop(struct inode *inode)
-{
-}
-
-static inline int dquot_alloc_inode(const struct inode *inode)
-{
-	return 0;
-}
-
-static inline void dquot_free_inode(const struct inode *inode)
-{
-}
-
-static inline int dquot_transfer(struct inode *inode, struct iattr *iattr)
-{
-	return 0;
-}
-
-static inline int __dquot_alloc_space(struct inode *inode, qsize_t number,
-		int flags)
-{
-	if (!(flags & DQUOT_SPACE_RESERVE))
-		inode_add_bytes(inode, number);
-	return 0;
-}
-
-static inline void __dquot_free_space(struct inode *inode, qsize_t number,
-		int flags)
-{
-	if (!(flags & DQUOT_SPACE_RESERVE))
-		inode_sub_bytes(inode, number);
-}
-
-static inline int dquot_claim_space_nodirty(struct inode *inode, qsize_t number)
-{
-	inode_add_bytes(inode, number);
-	return 0;
-}
-
-static inline int dquot_disable(struct super_block *sb, int type,
-		unsigned int flags)
-{
-	return 0;
-}
-
-static inline int dquot_suspend(struct super_block *sb, int type)
-{
-	return 0;
-}
-
-static inline int dquot_resume(struct super_block *sb, int type)
-{
-	return 0;
-}
-
-#define dquot_file_open		generic_file_open
-
-#endif /* CONFIG_QUOTA */
-
-static inline int dquot_alloc_space_nodirty(struct inode *inode, qsize_t nr)
-{
-	return __dquot_alloc_space(inode, nr, DQUOT_SPACE_WARN);
-}
-
-static inline void dquot_alloc_space_nofail(struct inode *inode, qsize_t nr)
-{
-	__dquot_alloc_space(inode, nr, DQUOT_SPACE_WARN|DQUOT_SPACE_NOFAIL);
-	mark_inode_dirty_sync(inode);
-}
-
-static inline int dquot_alloc_space(struct inode *inode, qsize_t nr)
-{
-	int ret;
-
-	ret = dquot_alloc_space_nodirty(inode, nr);
-	if (!ret) {
-		/*
-		 * Mark inode fully dirty. Since we are allocating blocks, inode
-		 * would become fully dirty soon anyway and it reportedly
-		 * reduces lock contention.
-		 */
-		mark_inode_dirty(inode);
-	}
-	return ret;
-}
-
-static inline int dquot_alloc_block_nodirty(struct inode *inode, qsize_t nr)
-{
-	return dquot_alloc_space_nodirty(inode, nr << inode->i_blkbits);
-}
-
-static inline void dquot_alloc_block_nofail(struct inode *inode, qsize_t nr)
-{
-	dquot_alloc_space_nofail(inode, nr << inode->i_blkbits);
-}
-
-static inline int dquot_alloc_block(struct inode *inode, qsize_t nr)
-{
-	return dquot_alloc_space(inode, nr << inode->i_blkbits);
-}
-
-static inline int dquot_prealloc_block_nodirty(struct inode *inode, qsize_t nr)
-{
-	return __dquot_alloc_space(inode, nr << inode->i_blkbits, 0);
-}
-
-static inline int dquot_prealloc_block(struct inode *inode, qsize_t nr)
-{
-	int ret;
-
-	ret = dquot_prealloc_block_nodirty(inode, nr);
-	if (!ret)
-		mark_inode_dirty_sync(inode);
-	return ret;
-}
-
-static inline int dquot_reserve_block(struct inode *inode, qsize_t nr)
-{
-	return __dquot_alloc_space(inode, nr << inode->i_blkbits,
-				DQUOT_SPACE_WARN|DQUOT_SPACE_RESERVE);
-}
-
-static inline int dquot_claim_block(struct inode *inode, qsize_t nr)
-{
-	int ret;
-
-	ret = dquot_claim_space_nodirty(inode, nr << inode->i_blkbits);
-	if (!ret)
-		mark_inode_dirty_sync(inode);
-	return ret;
-}
-
-static inline void dquot_free_space_nodirty(struct inode *inode, qsize_t nr)
-{
-	__dquot_free_space(inode, nr, 0);
-}
-
-static inline void dquot_free_space(struct inode *inode, qsize_t nr)
-{
-	dquot_free_space_nodirty(inode, nr);
-	mark_inode_dirty_sync(inode);
-}
-
-static inline void dquot_free_block_nodirty(struct inode *inode, qsize_t nr)
-{
-	dquot_free_space_nodirty(inode, nr << inode->i_blkbits);
-}
-
-static inline void dquot_free_block(struct inode *inode, qsize_t nr)
-{
-	dquot_free_space(inode, nr << inode->i_blkbits);
-}
-
-static inline void dquot_release_reservation_block(struct inode *inode,
-		qsize_t nr)
-{
-	__dquot_free_space(inode, nr << inode->i_blkbits, DQUOT_SPACE_RESERVE);
-}
-
-#endif /* _LINUX_QUOTAOPS_ */
diff --git a/ANDROID_3.4.5/include/linux/radeonfb.h b/ANDROID_3.4.5/include/linux/radeonfb.h
deleted file mode 100644
index 8c4bbdec..00000000
--- a/ANDROID_3.4.5/include/linux/radeonfb.h
+++ /dev/null
@@ -1,15 +0,0 @@
-#ifndef __LINUX_RADEONFB_H__
-#define __LINUX_RADEONFB_H__
-
-#include <asm/ioctl.h>
-#include <linux/types.h>
-
-#define ATY_RADEON_LCD_ON	0x00000001
-#define ATY_RADEON_CRT_ON	0x00000002
-
-
-#define FBIO_RADEON_GET_MIRROR	_IOR('@', 3, size_t)
-#define FBIO_RADEON_SET_MIRROR	_IOW('@', 4, size_t)
-
-#endif
-
diff --git a/ANDROID_3.4.5/include/linux/radix-tree.h b/ANDROID_3.4.5/include/linux/radix-tree.h
deleted file mode 100644
index ffc444c3..00000000
--- a/ANDROID_3.4.5/include/linux/radix-tree.h
+++ /dev/null
@@ -1,459 +0,0 @@
-/*
- * Copyright (C) 2001 Momchil Velikov
- * Portions Copyright (C) 2001 Christoph Hellwig
- * Copyright (C) 2006 Nick Piggin
- * Copyright (C) 2012 Konstantin Khlebnikov
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2, or (at
- * your option) any later version.
- * 
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- * 
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-#ifndef _LINUX_RADIX_TREE_H
-#define _LINUX_RADIX_TREE_H
-
-#include <linux/preempt.h>
-#include <linux/types.h>
-#include <linux/bug.h>
-#include <linux/kernel.h>
-#include <linux/rcupdate.h>
-
-/*
- * An indirect pointer (root->rnode pointing to a radix_tree_node, rather
- * than a data item) is signalled by the low bit set in the root->rnode
- * pointer.
- *
- * In this case root->height is > 0, but the indirect pointer tests are
- * needed for RCU lookups (because root->height is unreliable). The only
- * time callers need worry about this is when doing a lookup_slot under
- * RCU.
- *
- * Indirect pointer in fact is also used to tag the last pointer of a node
- * when it is shrunk, before we rcu free the node. See shrink code for
- * details.
- */
-#define RADIX_TREE_INDIRECT_PTR		1
-/*
- * A common use of the radix tree is to store pointers to struct pages;
- * but shmem/tmpfs needs also to store swap entries in the same tree:
- * those are marked as exceptional entries to distinguish them.
- * EXCEPTIONAL_ENTRY tests the bit, EXCEPTIONAL_SHIFT shifts content past it.
- */
-#define RADIX_TREE_EXCEPTIONAL_ENTRY	2
-#define RADIX_TREE_EXCEPTIONAL_SHIFT	2
-
-static inline int radix_tree_is_indirect_ptr(void *ptr)
-{
-	return (int)((unsigned long)ptr & RADIX_TREE_INDIRECT_PTR);
-}
-
-/*** radix-tree API starts here ***/
-
-#define RADIX_TREE_MAX_TAGS 3
-
-/* root tags are stored in gfp_mask, shifted by __GFP_BITS_SHIFT */
-struct radix_tree_root {
-	unsigned int		height;
-	gfp_t			gfp_mask;
-	struct radix_tree_node	__rcu *rnode;
-};
-
-#define RADIX_TREE_INIT(mask)	{					\
-	.height = 0,							\
-	.gfp_mask = (mask),						\
-	.rnode = NULL,							\
-}
-
-#define RADIX_TREE(name, mask) \
-	struct radix_tree_root name = RADIX_TREE_INIT(mask)
-
-#define INIT_RADIX_TREE(root, mask)					\
-do {									\
-	(root)->height = 0;						\
-	(root)->gfp_mask = (mask);					\
-	(root)->rnode = NULL;						\
-} while (0)
-
-/**
- * Radix-tree synchronization
- *
- * The radix-tree API requires that users provide all synchronisation (with
- * specific exceptions, noted below).
- *
- * Synchronization of access to the data items being stored in the tree, and
- * management of their lifetimes must be completely managed by API users.
- *
- * For API usage, in general,
- * - any function _modifying_ the tree or tags (inserting or deleting
- *   items, setting or clearing tags) must exclude other modifications, and
- *   exclude any functions reading the tree.
- * - any function _reading_ the tree or tags (looking up items or tags,
- *   gang lookups) must exclude modifications to the tree, but may occur
- *   concurrently with other readers.
- *
- * The notable exceptions to this rule are the following functions:
- * radix_tree_lookup
- * radix_tree_lookup_slot
- * radix_tree_tag_get
- * radix_tree_gang_lookup
- * radix_tree_gang_lookup_slot
- * radix_tree_gang_lookup_tag
- * radix_tree_gang_lookup_tag_slot
- * radix_tree_tagged
- *
- * The first 7 functions are able to be called locklessly, using RCU. The
- * caller must ensure calls to these functions are made within rcu_read_lock()
- * regions. Other readers (lock-free or otherwise) and modifications may be
- * running concurrently.
- *
- * It is still required that the caller manage the synchronization and lifetimes
- * of the items. So if RCU lock-free lookups are used, typically this would mean
- * that the items have their own locks, or are amenable to lock-free access; and
- * that the items are freed by RCU (or only freed after having been deleted from
- * the radix tree *and* a synchronize_rcu() grace period).
- *
- * (Note, rcu_assign_pointer and rcu_dereference are not needed to control
- * access to data items when inserting into or looking up from the radix tree)
- *
- * Note that the value returned by radix_tree_tag_get() may not be relied upon
- * if only the RCU read lock is held.  Functions to set/clear tags and to
- * delete nodes running concurrently with it may affect its result such that
- * two consecutive reads in the same locked section may return different
- * values.  If reliability is required, modification functions must also be
- * excluded from concurrency.
- *
- * radix_tree_tagged is able to be called without locking or RCU.
- */
-
-/**
- * radix_tree_deref_slot	- dereference a slot
- * @pslot:	pointer to slot, returned by radix_tree_lookup_slot
- * Returns:	item that was stored in that slot with any direct pointer flag
- *		removed.
- *
- * For use with radix_tree_lookup_slot().  Caller must hold tree at least read
- * locked across slot lookup and dereference. Not required if write lock is
- * held (ie. items cannot be concurrently inserted).
- *
- * radix_tree_deref_retry must be used to confirm validity of the pointer if
- * only the read lock is held.
- */
-static inline void *radix_tree_deref_slot(void **pslot)
-{
-	return rcu_dereference(*pslot);
-}
-
-/**
- * radix_tree_deref_slot_protected	- dereference a slot without RCU lock but with tree lock held
- * @pslot:	pointer to slot, returned by radix_tree_lookup_slot
- * Returns:	item that was stored in that slot with any direct pointer flag
- *		removed.
- *
- * Similar to radix_tree_deref_slot but only used during migration when a pages
- * mapping is being moved. The caller does not hold the RCU read lock but it
- * must hold the tree lock to prevent parallel updates.
- */
-static inline void *radix_tree_deref_slot_protected(void **pslot,
-							spinlock_t *treelock)
-{
-	return rcu_dereference_protected(*pslot, lockdep_is_held(treelock));
-}
-
-/**
- * radix_tree_deref_retry	- check radix_tree_deref_slot
- * @arg:	pointer returned by radix_tree_deref_slot
- * Returns:	0 if retry is not required, otherwise retry is required
- *
- * radix_tree_deref_retry must be used with radix_tree_deref_slot.
- */
-static inline int radix_tree_deref_retry(void *arg)
-{
-	return unlikely((unsigned long)arg & RADIX_TREE_INDIRECT_PTR);
-}
-
-/**
- * radix_tree_exceptional_entry	- radix_tree_deref_slot gave exceptional entry?
- * @arg:	value returned by radix_tree_deref_slot
- * Returns:	0 if well-aligned pointer, non-0 if exceptional entry.
- */
-static inline int radix_tree_exceptional_entry(void *arg)
-{
-	/* Not unlikely because radix_tree_exception often tested first */
-	return (unsigned long)arg & RADIX_TREE_EXCEPTIONAL_ENTRY;
-}
-
-/**
- * radix_tree_exception	- radix_tree_deref_slot returned either exception?
- * @arg:	value returned by radix_tree_deref_slot
- * Returns:	0 if well-aligned pointer, non-0 if either kind of exception.
- */
-static inline int radix_tree_exception(void *arg)
-{
-	return unlikely((unsigned long)arg &
-		(RADIX_TREE_INDIRECT_PTR | RADIX_TREE_EXCEPTIONAL_ENTRY));
-}
-
-/**
- * radix_tree_replace_slot	- replace item in a slot
- * @pslot:	pointer to slot, returned by radix_tree_lookup_slot
- * @item:	new item to store in the slot.
- *
- * For use with radix_tree_lookup_slot().  Caller must hold tree write locked
- * across slot lookup and replacement.
- */
-static inline void radix_tree_replace_slot(void **pslot, void *item)
-{
-	BUG_ON(radix_tree_is_indirect_ptr(item));
-	rcu_assign_pointer(*pslot, item);
-}
-
-int radix_tree_insert(struct radix_tree_root *, unsigned long, void *);
-void *radix_tree_lookup(struct radix_tree_root *, unsigned long);
-void **radix_tree_lookup_slot(struct radix_tree_root *, unsigned long);
-void *radix_tree_delete(struct radix_tree_root *, unsigned long);
-unsigned int
-radix_tree_gang_lookup(struct radix_tree_root *root, void **results,
-			unsigned long first_index, unsigned int max_items);
-unsigned int radix_tree_gang_lookup_slot(struct radix_tree_root *root,
-			void ***results, unsigned long *indices,
-			unsigned long first_index, unsigned int max_items);
-unsigned long radix_tree_next_hole(struct radix_tree_root *root,
-				unsigned long index, unsigned long max_scan);
-unsigned long radix_tree_prev_hole(struct radix_tree_root *root,
-				unsigned long index, unsigned long max_scan);
-int radix_tree_preload(gfp_t gfp_mask);
-void radix_tree_init(void);
-void *radix_tree_tag_set(struct radix_tree_root *root,
-			unsigned long index, unsigned int tag);
-void *radix_tree_tag_clear(struct radix_tree_root *root,
-			unsigned long index, unsigned int tag);
-int radix_tree_tag_get(struct radix_tree_root *root,
-			unsigned long index, unsigned int tag);
-unsigned int
-radix_tree_gang_lookup_tag(struct radix_tree_root *root, void **results,
-		unsigned long first_index, unsigned int max_items,
-		unsigned int tag);
-unsigned int
-radix_tree_gang_lookup_tag_slot(struct radix_tree_root *root, void ***results,
-		unsigned long first_index, unsigned int max_items,
-		unsigned int tag);
-unsigned long radix_tree_range_tag_if_tagged(struct radix_tree_root *root,
-		unsigned long *first_indexp, unsigned long last_index,
-		unsigned long nr_to_tag,
-		unsigned int fromtag, unsigned int totag);
-int radix_tree_tagged(struct radix_tree_root *root, unsigned int tag);
-unsigned long radix_tree_locate_item(struct radix_tree_root *root, void *item);
-
-static inline void radix_tree_preload_end(void)
-{
-	preempt_enable();
-}
-
-/**
- * struct radix_tree_iter - radix tree iterator state
- *
- * @index:	index of current slot
- * @next_index:	next-to-last index for this chunk
- * @tags:	bit-mask for tag-iterating
- *
- * This radix tree iterator works in terms of "chunks" of slots.  A chunk is a
- * subinterval of slots contained within one radix tree leaf node.  It is
- * described by a pointer to its first slot and a struct radix_tree_iter
- * which holds the chunk's position in the tree and its size.  For tagged
- * iteration radix_tree_iter also holds the slots' bit-mask for one chosen
- * radix tree tag.
- */
-struct radix_tree_iter {
-	unsigned long	index;
-	unsigned long	next_index;
-	unsigned long	tags;
-};
-
-#define RADIX_TREE_ITER_TAG_MASK	0x00FF	/* tag index in lower byte */
-#define RADIX_TREE_ITER_TAGGED		0x0100	/* lookup tagged slots */
-#define RADIX_TREE_ITER_CONTIG		0x0200	/* stop at first hole */
-
-/**
- * radix_tree_iter_init - initialize radix tree iterator
- *
- * @iter:	pointer to iterator state
- * @start:	iteration starting index
- * Returns:	NULL
- */
-static __always_inline void **
-radix_tree_iter_init(struct radix_tree_iter *iter, unsigned long start)
-{
-	/*
-	 * Leave iter->tags uninitialized. radix_tree_next_chunk() will fill it
-	 * in the case of a successful tagged chunk lookup.  If the lookup was
-	 * unsuccessful or non-tagged then nobody cares about ->tags.
-	 *
-	 * Set index to zero to bypass next_index overflow protection.
-	 * See the comment in radix_tree_next_chunk() for details.
-	 */
-	iter->index = 0;
-	iter->next_index = start;
-	return NULL;
-}
-
-/**
- * radix_tree_next_chunk - find next chunk of slots for iteration
- *
- * @root:	radix tree root
- * @iter:	iterator state
- * @flags:	RADIX_TREE_ITER_* flags and tag index
- * Returns:	pointer to chunk first slot, or NULL if there no more left
- *
- * This function looks up the next chunk in the radix tree starting from
- * @iter->next_index.  It returns a pointer to the chunk's first slot.
- * Also it fills @iter with data about chunk: position in the tree (index),
- * its end (next_index), and constructs a bit mask for tagged iterating (tags).
- */
-void **radix_tree_next_chunk(struct radix_tree_root *root,
-			     struct radix_tree_iter *iter, unsigned flags);
-
-/**
- * radix_tree_chunk_size - get current chunk size
- *
- * @iter:	pointer to radix tree iterator
- * Returns:	current chunk size
- */
-static __always_inline unsigned
-radix_tree_chunk_size(struct radix_tree_iter *iter)
-{
-	return iter->next_index - iter->index;
-}
-
-/**
- * radix_tree_next_slot - find next slot in chunk
- *
- * @slot:	pointer to current slot
- * @iter:	pointer to interator state
- * @flags:	RADIX_TREE_ITER_*, should be constant
- * Returns:	pointer to next slot, or NULL if there no more left
- *
- * This function updates @iter->index in the case of a successful lookup.
- * For tagged lookup it also eats @iter->tags.
- */
-static __always_inline void **
-radix_tree_next_slot(void **slot, struct radix_tree_iter *iter, unsigned flags)
-{
-	if (flags & RADIX_TREE_ITER_TAGGED) {
-		iter->tags >>= 1;
-		if (likely(iter->tags & 1ul)) {
-			iter->index++;
-			return slot + 1;
-		}
-		if (!(flags & RADIX_TREE_ITER_CONTIG) && likely(iter->tags)) {
-			unsigned offset = __ffs(iter->tags);
-
-			iter->tags >>= offset;
-			iter->index += offset + 1;
-			return slot + offset + 1;
-		}
-	} else {
-		unsigned size = radix_tree_chunk_size(iter) - 1;
-
-		while (size--) {
-			slot++;
-			iter->index++;
-			if (likely(*slot))
-				return slot;
-			if (flags & RADIX_TREE_ITER_CONTIG) {
-				/* forbid switching to the next chunk */
-				iter->next_index = 0;
-				break;
-			}
-		}
-	}
-	return NULL;
-}
-
-/**
- * radix_tree_for_each_chunk - iterate over chunks
- *
- * @slot:	the void** variable for pointer to chunk first slot
- * @root:	the struct radix_tree_root pointer
- * @iter:	the struct radix_tree_iter pointer
- * @start:	iteration starting index
- * @flags:	RADIX_TREE_ITER_* and tag index
- *
- * Locks can be released and reacquired between iterations.
- */
-#define radix_tree_for_each_chunk(slot, root, iter, start, flags)	\
-	for (slot = radix_tree_iter_init(iter, start) ;			\
-	      (slot = radix_tree_next_chunk(root, iter, flags)) ;)
-
-/**
- * radix_tree_for_each_chunk_slot - iterate over slots in one chunk
- *
- * @slot:	the void** variable, at the beginning points to chunk first slot
- * @iter:	the struct radix_tree_iter pointer
- * @flags:	RADIX_TREE_ITER_*, should be constant
- *
- * This macro is designed to be nested inside radix_tree_for_each_chunk().
- * @slot points to the radix tree slot, @iter->index contains its index.
- */
-#define radix_tree_for_each_chunk_slot(slot, iter, flags)		\
-	for (; slot ; slot = radix_tree_next_slot(slot, iter, flags))
-
-/**
- * radix_tree_for_each_slot - iterate over non-empty slots
- *
- * @slot:	the void** variable for pointer to slot
- * @root:	the struct radix_tree_root pointer
- * @iter:	the struct radix_tree_iter pointer
- * @start:	iteration starting index
- *
- * @slot points to radix tree slot, @iter->index contains its index.
- */
-#define radix_tree_for_each_slot(slot, root, iter, start)		\
-	for (slot = radix_tree_iter_init(iter, start) ;			\
-	     slot || (slot = radix_tree_next_chunk(root, iter, 0)) ;	\
-	     slot = radix_tree_next_slot(slot, iter, 0))
-
-/**
- * radix_tree_for_each_contig - iterate over contiguous slots
- *
- * @slot:	the void** variable for pointer to slot
- * @root:	the struct radix_tree_root pointer
- * @iter:	the struct radix_tree_iter pointer
- * @start:	iteration starting index
- *
- * @slot points to radix tree slot, @iter->index contains its index.
- */
-#define radix_tree_for_each_contig(slot, root, iter, start)		\
-	for (slot = radix_tree_iter_init(iter, start) ;			\
-	     slot || (slot = radix_tree_next_chunk(root, iter,		\
-				RADIX_TREE_ITER_CONTIG)) ;		\
-	     slot = radix_tree_next_slot(slot, iter,			\
-				RADIX_TREE_ITER_CONTIG))
-
-/**
- * radix_tree_for_each_tagged - iterate over tagged slots
- *
- * @slot:	the void** variable for pointer to slot
- * @root:	the struct radix_tree_root pointer
- * @iter:	the struct radix_tree_iter pointer
- * @start:	iteration starting index
- * @tag:	tag index
- *
- * @slot points to radix tree slot, @iter->index contains its index.
- */
-#define radix_tree_for_each_tagged(slot, root, iter, start, tag)	\
-	for (slot = radix_tree_iter_init(iter, start) ;			\
-	     slot || (slot = radix_tree_next_chunk(root, iter,		\
-			      RADIX_TREE_ITER_TAGGED | tag)) ;		\
-	     slot = radix_tree_next_slot(slot, iter,			\
-				RADIX_TREE_ITER_TAGGED))
-
-#endif /* _LINUX_RADIX_TREE_H */
diff --git a/ANDROID_3.4.5/include/linux/raid/Kbuild b/ANDROID_3.4.5/include/linux/raid/Kbuild
deleted file mode 100644
index 2415a64c..00000000
--- a/ANDROID_3.4.5/include/linux/raid/Kbuild
+++ /dev/null
@@ -1,2 +0,0 @@
-header-y += md_p.h
-header-y += md_u.h
diff --git a/ANDROID_3.4.5/include/linux/raid/md_p.h b/ANDROID_3.4.5/include/linux/raid/md_p.h
deleted file mode 100644
index 8c0a3adc..00000000
--- a/ANDROID_3.4.5/include/linux/raid/md_p.h
+++ /dev/null
@@ -1,290 +0,0 @@
-/*
-   md_p.h : physical layout of Linux RAID devices
-          Copyright (C) 1996-98 Ingo Molnar, Gadi Oxman
-	  
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 2, or (at your option)
-   any later version.
-   
-   You should have received a copy of the GNU General Public License
-   (for example /usr/src/linux/COPYING); if not, write to the Free
-   Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  
-*/
-
-#ifndef _MD_P_H
-#define _MD_P_H
-
-#include <linux/types.h>
-
-/*
- * RAID superblock.
- *
- * The RAID superblock maintains some statistics on each RAID configuration.
- * Each real device in the RAID set contains it near the end of the device.
- * Some of the ideas are copied from the ext2fs implementation.
- *
- * We currently use 4096 bytes as follows:
- *
- *	word offset	function
- *
- *	   0  -    31	Constant generic RAID device information.
- *        32  -    63   Generic state information.
- *	  64  -   127	Personality specific information.
- *	 128  -   511	12 32-words descriptors of the disks in the raid set.
- *	 512  -   911	Reserved.
- *	 912  -  1023	Disk specific descriptor.
- */
-
-/*
- * If x is the real device size in bytes, we return an apparent size of:
- *
- *	y = (x & ~(MD_RESERVED_BYTES - 1)) - MD_RESERVED_BYTES
- *
- * and place the 4kB superblock at offset y.
- */
-#define MD_RESERVED_BYTES		(64 * 1024)
-#define MD_RESERVED_SECTORS		(MD_RESERVED_BYTES / 512)
-
-#define MD_NEW_SIZE_SECTORS(x)		((x & ~(MD_RESERVED_SECTORS - 1)) - MD_RESERVED_SECTORS)
-
-#define MD_SB_BYTES			4096
-#define MD_SB_WORDS			(MD_SB_BYTES / 4)
-#define MD_SB_SECTORS			(MD_SB_BYTES / 512)
-
-/*
- * The following are counted in 32-bit words
- */
-#define	MD_SB_GENERIC_OFFSET		0
-#define MD_SB_PERSONALITY_OFFSET	64
-#define MD_SB_DISKS_OFFSET		128
-#define MD_SB_DESCRIPTOR_OFFSET		992
-
-#define MD_SB_GENERIC_CONSTANT_WORDS	32
-#define MD_SB_GENERIC_STATE_WORDS	32
-#define MD_SB_GENERIC_WORDS		(MD_SB_GENERIC_CONSTANT_WORDS + MD_SB_GENERIC_STATE_WORDS)
-#define MD_SB_PERSONALITY_WORDS		64
-#define MD_SB_DESCRIPTOR_WORDS		32
-#define MD_SB_DISKS			27
-#define MD_SB_DISKS_WORDS		(MD_SB_DISKS*MD_SB_DESCRIPTOR_WORDS)
-#define MD_SB_RESERVED_WORDS		(1024 - MD_SB_GENERIC_WORDS - MD_SB_PERSONALITY_WORDS - MD_SB_DISKS_WORDS - MD_SB_DESCRIPTOR_WORDS)
-#define MD_SB_EQUAL_WORDS		(MD_SB_GENERIC_WORDS + MD_SB_PERSONALITY_WORDS + MD_SB_DISKS_WORDS)
-
-/*
- * Device "operational" state bits
- */
-#define MD_DISK_FAULTY		0 /* disk is faulty / operational */
-#define MD_DISK_ACTIVE		1 /* disk is running or spare disk */
-#define MD_DISK_SYNC		2 /* disk is in sync with the raid set */
-#define MD_DISK_REMOVED		3 /* disk is in sync with the raid set */
-
-#define	MD_DISK_WRITEMOSTLY	9 /* disk is "write-mostly" is RAID1 config.
-				   * read requests will only be sent here in
-				   * dire need
-				   */
-
-typedef struct mdp_device_descriptor_s {
-	__u32 number;		/* 0 Device number in the entire set	      */
-	__u32 major;		/* 1 Device major number		      */
-	__u32 minor;		/* 2 Device minor number		      */
-	__u32 raid_disk;	/* 3 The role of the device in the raid set   */
-	__u32 state;		/* 4 Operational state			      */
-	__u32 reserved[MD_SB_DESCRIPTOR_WORDS - 5];
-} mdp_disk_t;
-
-#define MD_SB_MAGIC		0xa92b4efc
-
-/*
- * Superblock state bits
- */
-#define MD_SB_CLEAN		0
-#define MD_SB_ERRORS		1
-
-#define	MD_SB_BITMAP_PRESENT	8 /* bitmap may be present nearby */
-
-/*
- * Notes:
- * - if an array is being reshaped (restriped) in order to change the
- *   the number of active devices in the array, 'raid_disks' will be
- *   the larger of the old and new numbers.  'delta_disks' will
- *   be the "new - old".  So if +ve, raid_disks is the new value, and
- *   "raid_disks-delta_disks" is the old.  If -ve, raid_disks is the
- *   old value and "raid_disks+delta_disks" is the new (smaller) value.
- */
-
-
-typedef struct mdp_superblock_s {
-	/*
-	 * Constant generic information
-	 */
-	__u32 md_magic;		/*  0 MD identifier 			      */
-	__u32 major_version;	/*  1 major version to which the set conforms */
-	__u32 minor_version;	/*  2 minor version ...			      */
-	__u32 patch_version;	/*  3 patchlevel version ...		      */
-	__u32 gvalid_words;	/*  4 Number of used words in this section    */
-	__u32 set_uuid0;	/*  5 Raid set identifier		      */
-	__u32 ctime;		/*  6 Creation time			      */
-	__u32 level;		/*  7 Raid personality			      */
-	__u32 size;		/*  8 Apparent size of each individual disk   */
-	__u32 nr_disks;		/*  9 total disks in the raid set	      */
-	__u32 raid_disks;	/* 10 disks in a fully functional raid set    */
-	__u32 md_minor;		/* 11 preferred MD minor device number	      */
-	__u32 not_persistent;	/* 12 does it have a persistent superblock    */
-	__u32 set_uuid1;	/* 13 Raid set identifier #2		      */
-	__u32 set_uuid2;	/* 14 Raid set identifier #3		      */
-	__u32 set_uuid3;	/* 15 Raid set identifier #4		      */
-	__u32 gstate_creserved[MD_SB_GENERIC_CONSTANT_WORDS - 16];
-
-	/*
-	 * Generic state information
-	 */
-	__u32 utime;		/*  0 Superblock update time		      */
-	__u32 state;		/*  1 State bits (clean, ...)		      */
-	__u32 active_disks;	/*  2 Number of currently active disks	      */
-	__u32 working_disks;	/*  3 Number of working disks		      */
-	__u32 failed_disks;	/*  4 Number of failed disks		      */
-	__u32 spare_disks;	/*  5 Number of spare disks		      */
-	__u32 sb_csum;		/*  6 checksum of the whole superblock        */
-#ifdef __BIG_ENDIAN
-	__u32 events_hi;	/*  7 high-order of superblock update count   */
-	__u32 events_lo;	/*  8 low-order of superblock update count    */
-	__u32 cp_events_hi;	/*  9 high-order of checkpoint update count   */
-	__u32 cp_events_lo;	/* 10 low-order of checkpoint update count    */
-#else
-	__u32 events_lo;	/*  7 low-order of superblock update count    */
-	__u32 events_hi;	/*  8 high-order of superblock update count   */
-	__u32 cp_events_lo;	/*  9 low-order of checkpoint update count    */
-	__u32 cp_events_hi;	/* 10 high-order of checkpoint update count   */
-#endif
-	__u32 recovery_cp;	/* 11 recovery checkpoint sector count	      */
-	/* There are only valid for minor_version > 90 */
-	__u64 reshape_position;	/* 12,13 next address in array-space for reshape */
-	__u32 new_level;	/* 14 new level we are reshaping to	      */
-	__u32 delta_disks;	/* 15 change in number of raid_disks	      */
-	__u32 new_layout;	/* 16 new layout			      */
-	__u32 new_chunk;	/* 17 new chunk size (bytes)		      */
-	__u32 gstate_sreserved[MD_SB_GENERIC_STATE_WORDS - 18];
-
-	/*
-	 * Personality information
-	 */
-	__u32 layout;		/*  0 the array's physical layout	      */
-	__u32 chunk_size;	/*  1 chunk size in bytes		      */
-	__u32 root_pv;		/*  2 LV root PV */
-	__u32 root_block;	/*  3 LV root block */
-	__u32 pstate_reserved[MD_SB_PERSONALITY_WORDS - 4];
-
-	/*
-	 * Disks information
-	 */
-	mdp_disk_t disks[MD_SB_DISKS];
-
-	/*
-	 * Reserved
-	 */
-	__u32 reserved[MD_SB_RESERVED_WORDS];
-
-	/*
-	 * Active descriptor
-	 */
-	mdp_disk_t this_disk;
-
-} mdp_super_t;
-
-static inline __u64 md_event(mdp_super_t *sb) {
-	__u64 ev = sb->events_hi;
-	return (ev<<32)| sb->events_lo;
-}
-
-#define MD_SUPERBLOCK_1_TIME_SEC_MASK ((1ULL<<40) - 1)
-
-/*
- * The version-1 superblock :
- * All numeric fields are little-endian.
- *
- * total size: 256 bytes plus 2 per device.
- *  1K allows 384 devices.
- */
-struct mdp_superblock_1 {
-	/* constant array information - 128 bytes */
-	__le32	magic;		/* MD_SB_MAGIC: 0xa92b4efc - little endian */
-	__le32	major_version;	/* 1 */
-	__le32	feature_map;	/* bit 0 set if 'bitmap_offset' is meaningful */
-	__le32	pad0;		/* always set to 0 when writing */
-
-	__u8	set_uuid[16];	/* user-space generated. */
-	char	set_name[32];	/* set and interpreted by user-space */
-
-	__le64	ctime;		/* lo 40 bits are seconds, top 24 are microseconds or 0*/
-	__le32	level;		/* -4 (multipath), -1 (linear), 0,1,4,5 */
-	__le32	layout;		/* only for raid5 and raid10 currently */
-	__le64	size;		/* used size of component devices, in 512byte sectors */
-
-	__le32	chunksize;	/* in 512byte sectors */
-	__le32	raid_disks;
-	__le32	bitmap_offset;	/* sectors after start of superblock that bitmap starts
-				 * NOTE: signed, so bitmap can be before superblock
-				 * only meaningful of feature_map[0] is set.
-				 */
-
-	/* These are only valid with feature bit '4' */
-	__le32	new_level;	/* new level we are reshaping to		*/
-	__le64	reshape_position;	/* next address in array-space for reshape */
-	__le32	delta_disks;	/* change in number of raid_disks		*/
-	__le32	new_layout;	/* new layout					*/
-	__le32	new_chunk;	/* new chunk size (512byte sectors)		*/
-	__u8	pad1[128-124];	/* set to 0 when written */
-
-	/* constant this-device information - 64 bytes */
-	__le64	data_offset;	/* sector start of data, often 0 */
-	__le64	data_size;	/* sectors in this device that can be used for data */
-	__le64	super_offset;	/* sector start of this superblock */
-	__le64	recovery_offset;/* sectors before this offset (from data_offset) have been recovered */
-	__le32	dev_number;	/* permanent identifier of this  device - not role in raid */
-	__le32	cnt_corrected_read; /* number of read errors that were corrected by re-writing */
-	__u8	device_uuid[16]; /* user-space setable, ignored by kernel */
-	__u8	devflags;	/* per-device flags.  Only one defined...*/
-#define	WriteMostly1	1	/* mask for writemostly flag in above */
-	/* Bad block log.  If there are any bad blocks the feature flag is set.
-	 * If offset and size are non-zero, that space is reserved and available
-	 */
-	__u8	bblog_shift;	/* shift from sectors to block size */
-	__le16	bblog_size;	/* number of sectors reserved for list */
-	__le32	bblog_offset;	/* sector offset from superblock to bblog,
-				 * signed - not unsigned */
-
-	/* array state information - 64 bytes */
-	__le64	utime;		/* 40 bits second, 24 bits microseconds */
-	__le64	events;		/* incremented when superblock updated */
-	__le64	resync_offset;	/* data before this offset (from data_offset) known to be in sync */
-	__le32	sb_csum;	/* checksum up to devs[max_dev] */
-	__le32	max_dev;	/* size of devs[] array to consider */
-	__u8	pad3[64-32];	/* set to 0 when writing */
-
-	/* device state information. Indexed by dev_number.
-	 * 2 bytes per device
-	 * Note there are no per-device state flags. State information is rolled
-	 * into the 'roles' value.  If a device is spare or faulty, then it doesn't
-	 * have a meaningful role.
-	 */
-	__le16	dev_roles[0];	/* role in array, or 0xffff for a spare, or 0xfffe for faulty */
-};
-
-/* feature_map bits */
-#define MD_FEATURE_BITMAP_OFFSET	1
-#define	MD_FEATURE_RECOVERY_OFFSET	2 /* recovery_offset is present and
-					   * must be honoured
-					   */
-#define	MD_FEATURE_RESHAPE_ACTIVE	4
-#define	MD_FEATURE_BAD_BLOCKS		8 /* badblock list is not empty */
-#define	MD_FEATURE_REPLACEMENT		16 /* This device is replacing an
-					    * active device with same 'role'.
-					    * 'recovery_offset' is also set.
-					    */
-#define	MD_FEATURE_ALL			(MD_FEATURE_BITMAP_OFFSET	\
-					|MD_FEATURE_RECOVERY_OFFSET	\
-					|MD_FEATURE_RESHAPE_ACTIVE	\
-					|MD_FEATURE_BAD_BLOCKS		\
-					|MD_FEATURE_REPLACEMENT)
-
-#endif 
diff --git a/ANDROID_3.4.5/include/linux/raid/md_u.h b/ANDROID_3.4.5/include/linux/raid/md_u.h
deleted file mode 100644
index fb1abb33..00000000
--- a/ANDROID_3.4.5/include/linux/raid/md_u.h
+++ /dev/null
@@ -1,159 +0,0 @@
-/*
-   md_u.h : user <=> kernel API between Linux raidtools and RAID drivers
-          Copyright (C) 1998 Ingo Molnar
-	  
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 2, or (at your option)
-   any later version.
-   
-   You should have received a copy of the GNU General Public License
-   (for example /usr/src/linux/COPYING); if not, write to the Free
-   Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  
-*/
-
-#ifndef _MD_U_H
-#define _MD_U_H
-
-/*
- * Different major versions are not compatible.
- * Different minor versions are only downward compatible.
- * Different patchlevel versions are downward and upward compatible.
- */
-#define MD_MAJOR_VERSION                0
-#define MD_MINOR_VERSION                90
-/*
- * MD_PATCHLEVEL_VERSION indicates kernel functionality.
- * >=1 means different superblock formats are selectable using SET_ARRAY_INFO
- *     and major_version/minor_version accordingly
- * >=2 means that Internal bitmaps are supported by setting MD_SB_BITMAP_PRESENT
- *     in the super status byte
- * >=3 means that bitmap superblock version 4 is supported, which uses
- *     little-ending representation rather than host-endian
- */
-#define MD_PATCHLEVEL_VERSION           3
-
-/* ioctls */
-
-/* status */
-#define RAID_VERSION		_IOR (MD_MAJOR, 0x10, mdu_version_t)
-#define GET_ARRAY_INFO		_IOR (MD_MAJOR, 0x11, mdu_array_info_t)
-#define GET_DISK_INFO		_IOR (MD_MAJOR, 0x12, mdu_disk_info_t)
-#define PRINT_RAID_DEBUG	_IO (MD_MAJOR, 0x13)
-#define RAID_AUTORUN		_IO (MD_MAJOR, 0x14)
-#define GET_BITMAP_FILE		_IOR (MD_MAJOR, 0x15, mdu_bitmap_file_t)
-
-/* configuration */
-#define CLEAR_ARRAY		_IO (MD_MAJOR, 0x20)
-#define ADD_NEW_DISK		_IOW (MD_MAJOR, 0x21, mdu_disk_info_t)
-#define HOT_REMOVE_DISK		_IO (MD_MAJOR, 0x22)
-#define SET_ARRAY_INFO		_IOW (MD_MAJOR, 0x23, mdu_array_info_t)
-#define SET_DISK_INFO		_IO (MD_MAJOR, 0x24)
-#define WRITE_RAID_INFO		_IO (MD_MAJOR, 0x25)
-#define UNPROTECT_ARRAY		_IO (MD_MAJOR, 0x26)
-#define PROTECT_ARRAY		_IO (MD_MAJOR, 0x27)
-#define HOT_ADD_DISK		_IO (MD_MAJOR, 0x28)
-#define SET_DISK_FAULTY		_IO (MD_MAJOR, 0x29)
-#define HOT_GENERATE_ERROR	_IO (MD_MAJOR, 0x2a)
-#define SET_BITMAP_FILE		_IOW (MD_MAJOR, 0x2b, int)
-
-/* usage */
-#define RUN_ARRAY		_IOW (MD_MAJOR, 0x30, mdu_param_t)
-/*  0x31 was START_ARRAY  */
-#define STOP_ARRAY		_IO (MD_MAJOR, 0x32)
-#define STOP_ARRAY_RO		_IO (MD_MAJOR, 0x33)
-#define RESTART_ARRAY_RW	_IO (MD_MAJOR, 0x34)
-
-/* 63 partitions with the alternate major number (mdp) */
-#define MdpMinorShift 6
-#ifdef __KERNEL__
-extern int mdp_major;
-#endif
-
-typedef struct mdu_version_s {
-	int major;
-	int minor;
-	int patchlevel;
-} mdu_version_t;
-
-typedef struct mdu_array_info_s {
-	/*
-	 * Generic constant information
-	 */
-	int major_version;
-	int minor_version;
-	int patch_version;
-	int ctime;
-	int level;
-	int size;
-	int nr_disks;
-	int raid_disks;
-	int md_minor;
-	int not_persistent;
-
-	/*
-	 * Generic state information
-	 */
-	int utime;		/*  0 Superblock update time		      */
-	int state;		/*  1 State bits (clean, ...)		      */
-	int active_disks;	/*  2 Number of currently active disks	      */
-	int working_disks;	/*  3 Number of working disks		      */
-	int failed_disks;	/*  4 Number of failed disks		      */
-	int spare_disks;	/*  5 Number of spare disks		      */
-
-	/*
-	 * Personality information
-	 */
-	int layout;		/*  0 the array's physical layout	      */
-	int chunk_size;	/*  1 chunk size in bytes		      */
-
-} mdu_array_info_t;
-
-/* non-obvious values for 'level' */
-#define	LEVEL_MULTIPATH		(-4)
-#define	LEVEL_LINEAR		(-1)
-#define	LEVEL_FAULTY		(-5)
-
-/* we need a value for 'no level specified' and 0
- * means 'raid0', so we need something else.  This is
- * for internal use only
- */
-#define	LEVEL_NONE		(-1000000)
-
-typedef struct mdu_disk_info_s {
-	/*
-	 * configuration/status of one particular disk
-	 */
-	int number;
-	int major;
-	int minor;
-	int raid_disk;
-	int state;
-
-} mdu_disk_info_t;
-
-typedef struct mdu_start_info_s {
-	/*
-	 * configuration/status of one particular disk
-	 */
-	int major;
-	int minor;
-	int raid_disk;
-	int state;
-
-} mdu_start_info_t;
-
-typedef struct mdu_bitmap_file_s
-{
-	char pathname[4096];
-} mdu_bitmap_file_t;
-
-typedef struct mdu_param_s
-{
-	int			personality;	/* 1,2,3,4 */
-	int			chunk_size;	/* in bytes */
-	int			max_fault;	/* unused for now */
-} mdu_param_t;
-
-#endif 
-
diff --git a/ANDROID_3.4.5/include/linux/raid/pq.h b/ANDROID_3.4.5/include/linux/raid/pq.h
deleted file mode 100644
index 53272e98..00000000
--- a/ANDROID_3.4.5/include/linux/raid/pq.h
+++ /dev/null
@@ -1,153 +0,0 @@
-/* -*- linux-c -*- ------------------------------------------------------- *
- *
- *   Copyright 2003 H. Peter Anvin - All Rights Reserved
- *
- *   This program is free software; you can redistribute it and/or modify
- *   it under the terms of the GNU General Public License as published by
- *   the Free Software Foundation, Inc., 53 Temple Place Ste 330,
- *   Boston MA 02111-1307, USA; either version 2 of the License, or
- *   (at your option) any later version; incorporated herein by reference.
- *
- * ----------------------------------------------------------------------- */
-
-#ifndef LINUX_RAID_RAID6_H
-#define LINUX_RAID_RAID6_H
-
-#ifdef __KERNEL__
-
-/* Set to 1 to use kernel-wide empty_zero_page */
-#define RAID6_USE_EMPTY_ZERO_PAGE 0
-#include <linux/blkdev.h>
-
-/* We need a pre-zeroed page... if we don't want to use the kernel-provided
-   one define it here */
-#if RAID6_USE_EMPTY_ZERO_PAGE
-# define raid6_empty_zero_page empty_zero_page
-#else
-extern const char raid6_empty_zero_page[PAGE_SIZE];
-#endif
-
-#else /* ! __KERNEL__ */
-/* Used for testing in user space */
-
-#include <errno.h>
-#include <inttypes.h>
-#include <limits.h>
-#include <stddef.h>
-#include <sys/mman.h>
-#include <sys/types.h>
-
-/* Not standard, but glibc defines it */
-#define BITS_PER_LONG __WORDSIZE
-
-typedef uint8_t  u8;
-typedef uint16_t u16;
-typedef uint32_t u32;
-typedef uint64_t u64;
-
-#ifndef PAGE_SIZE
-# define PAGE_SIZE 4096
-#endif
-extern const char raid6_empty_zero_page[PAGE_SIZE];
-
-#define __init
-#define __exit
-#define __attribute_const__ __attribute__((const))
-#define noinline __attribute__((noinline))
-
-#define preempt_enable()
-#define preempt_disable()
-#define cpu_has_feature(x) 1
-#define enable_kernel_altivec()
-#define disable_kernel_altivec()
-
-#define EXPORT_SYMBOL(sym)
-#define EXPORT_SYMBOL_GPL(sym)
-#define MODULE_LICENSE(licence)
-#define MODULE_DESCRIPTION(desc)
-#define subsys_initcall(x)
-#define module_exit(x)
-#endif /* __KERNEL__ */
-
-/* Routine choices */
-struct raid6_calls {
-	void (*gen_syndrome)(int, size_t, void **);
-	int  (*valid)(void);	/* Returns 1 if this routine set is usable */
-	const char *name;	/* Name of this routine set */
-	int prefer;		/* Has special performance attribute */
-};
-
-/* Selected algorithm */
-extern struct raid6_calls raid6_call;
-
-/* Various routine sets */
-extern const struct raid6_calls raid6_intx1;
-extern const struct raid6_calls raid6_intx2;
-extern const struct raid6_calls raid6_intx4;
-extern const struct raid6_calls raid6_intx8;
-extern const struct raid6_calls raid6_intx16;
-extern const struct raid6_calls raid6_intx32;
-extern const struct raid6_calls raid6_mmxx1;
-extern const struct raid6_calls raid6_mmxx2;
-extern const struct raid6_calls raid6_sse1x1;
-extern const struct raid6_calls raid6_sse1x2;
-extern const struct raid6_calls raid6_sse2x1;
-extern const struct raid6_calls raid6_sse2x2;
-extern const struct raid6_calls raid6_sse2x4;
-extern const struct raid6_calls raid6_altivec1;
-extern const struct raid6_calls raid6_altivec2;
-extern const struct raid6_calls raid6_altivec4;
-extern const struct raid6_calls raid6_altivec8;
-
-/* Algorithm list */
-extern const struct raid6_calls * const raid6_algos[];
-int raid6_select_algo(void);
-
-/* Return values from chk_syndrome */
-#define RAID6_OK	0
-#define RAID6_P_BAD	1
-#define RAID6_Q_BAD	2
-#define RAID6_PQ_BAD	3
-
-/* Galois field tables */
-extern const u8 raid6_gfmul[256][256] __attribute__((aligned(256)));
-extern const u8 raid6_gfexp[256]      __attribute__((aligned(256)));
-extern const u8 raid6_gfinv[256]      __attribute__((aligned(256)));
-extern const u8 raid6_gfexi[256]      __attribute__((aligned(256)));
-
-/* Recovery routines */
-void raid6_2data_recov(int disks, size_t bytes, int faila, int failb,
-		       void **ptrs);
-void raid6_datap_recov(int disks, size_t bytes, int faila, void **ptrs);
-void raid6_dual_recov(int disks, size_t bytes, int faila, int failb,
-		      void **ptrs);
-
-/* Some definitions to allow code to be compiled for testing in userspace */
-#ifndef __KERNEL__
-
-# define jiffies	raid6_jiffies()
-# define printk 	printf
-# define GFP_KERNEL	0
-# define __get_free_pages(x, y)	((unsigned long)mmap(NULL, PAGE_SIZE << (y), \
-						     PROT_READ|PROT_WRITE,   \
-						     MAP_PRIVATE|MAP_ANONYMOUS,\
-						     0, 0))
-# define free_pages(x, y)	munmap((void *)(x), PAGE_SIZE << (y))
-
-static inline void cpu_relax(void)
-{
-	/* Nothing */
-}
-
-#undef  HZ
-#define HZ 1000
-static inline uint32_t raid6_jiffies(void)
-{
-	struct timeval tv;
-	gettimeofday(&tv, NULL);
-	return tv.tv_sec*1000 + tv.tv_usec/1000;
-}
-
-#endif /* ! __KERNEL__ */
-
-#endif /* LINUX_RAID_RAID6_H */
diff --git a/ANDROID_3.4.5/include/linux/raid/xor.h b/ANDROID_3.4.5/include/linux/raid/xor.h
deleted file mode 100644
index 5a210959..00000000
--- a/ANDROID_3.4.5/include/linux/raid/xor.h
+++ /dev/null
@@ -1,22 +0,0 @@
-#ifndef _XOR_H
-#define _XOR_H
-
-#define MAX_XOR_BLOCKS 4
-
-extern void xor_blocks(unsigned int count, unsigned int bytes,
-	void *dest, void **srcs);
-
-struct xor_block_template {
-        struct xor_block_template *next;
-        const char *name;
-        int speed;
-	void (*do_2)(unsigned long, unsigned long *, unsigned long *);
-	void (*do_3)(unsigned long, unsigned long *, unsigned long *,
-		     unsigned long *);
-	void (*do_4)(unsigned long, unsigned long *, unsigned long *,
-		     unsigned long *, unsigned long *);
-	void (*do_5)(unsigned long, unsigned long *, unsigned long *,
-		     unsigned long *, unsigned long *, unsigned long *);
-};
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/raid_class.h b/ANDROID_3.4.5/include/linux/raid_class.h
deleted file mode 100644
index 31e1ff69..00000000
--- a/ANDROID_3.4.5/include/linux/raid_class.h
+++ /dev/null
@@ -1,83 +0,0 @@
-/*
- * raid_class.h - a generic raid visualisation class
- *
- * Copyright (c) 2005 - James Bottomley <James.Bottomley@steeleye.com>
- *
- * This file is licensed under GPLv2
- */
-#include <linux/transport_class.h>
-
-struct raid_template {
-	struct transport_container raid_attrs;
-};
-
-struct raid_function_template {
-	void *cookie;
-	int (*is_raid)(struct device *);
-	void (*get_resync)(struct device *);
-	void (*get_state)(struct device *);
-};
-
-enum raid_state {
-	RAID_STATE_UNKNOWN = 0,
-	RAID_STATE_ACTIVE,
-	RAID_STATE_DEGRADED,
-	RAID_STATE_RESYNCING,
-	RAID_STATE_OFFLINE,
-};
-
-enum raid_level {
-	RAID_LEVEL_UNKNOWN = 0,
-	RAID_LEVEL_LINEAR,
-	RAID_LEVEL_0,
-	RAID_LEVEL_1,
-	RAID_LEVEL_10,
-	RAID_LEVEL_1E,
-	RAID_LEVEL_3,
-	RAID_LEVEL_4,
-	RAID_LEVEL_5,
-	RAID_LEVEL_50,
-	RAID_LEVEL_6,
-};
-
-struct raid_data {
-	struct list_head component_list;
-	int component_count;
-	enum raid_level level;
-	enum raid_state state;
-	int resync;
-};
-
-/* resync complete goes from 0 to this */
-#define RAID_MAX_RESYNC		(10000)
-
-#define DEFINE_RAID_ATTRIBUTE(type, attr)				      \
-static inline void							      \
-raid_set_##attr(struct raid_template *r, struct device *dev, type value) {    \
-	struct device *device =						      \
-		attribute_container_find_class_device(&r->raid_attrs.ac, dev);\
-	struct raid_data *rd;						      \
-	BUG_ON(!device);						      \
-	rd = dev_get_drvdata(device);					      \
-	rd->attr = value;						      \
-}									      \
-static inline type							      \
-raid_get_##attr(struct raid_template *r, struct device *dev) {		      \
-	struct device *device =						      \
-		attribute_container_find_class_device(&r->raid_attrs.ac, dev);\
-	struct raid_data *rd;						      \
-	BUG_ON(!device);						      \
-	rd = dev_get_drvdata(device);					      \
-	return rd->attr;						      \
-}
-
-DEFINE_RAID_ATTRIBUTE(enum raid_level, level)
-DEFINE_RAID_ATTRIBUTE(int, resync)
-DEFINE_RAID_ATTRIBUTE(enum raid_state, state)
-	
-struct raid_template *raid_class_attach(struct raid_function_template *);
-void raid_class_release(struct raid_template *);
-
-int __must_check raid_component_add(struct raid_template *, struct device *,
-				    struct device *);
-
diff --git a/ANDROID_3.4.5/include/linux/ramfs.h b/ANDROID_3.4.5/include/linux/ramfs.h
deleted file mode 100644
index 5bf5500d..00000000
--- a/ANDROID_3.4.5/include/linux/ramfs.h
+++ /dev/null
@@ -1,26 +0,0 @@
-#ifndef _LINUX_RAMFS_H
-#define _LINUX_RAMFS_H
-
-struct inode *ramfs_get_inode(struct super_block *sb, const struct inode *dir,
-	 umode_t mode, dev_t dev);
-extern struct dentry *ramfs_mount(struct file_system_type *fs_type,
-	 int flags, const char *dev_name, void *data);
-
-#ifndef CONFIG_MMU
-extern int ramfs_nommu_expand_for_mapping(struct inode *inode, size_t newsize);
-extern unsigned long ramfs_nommu_get_unmapped_area(struct file *file,
-						   unsigned long addr,
-						   unsigned long len,
-						   unsigned long pgoff,
-						   unsigned long flags);
-
-extern int ramfs_nommu_mmap(struct file *file, struct vm_area_struct *vma);
-#endif
-
-extern const struct file_operations ramfs_file_operations;
-extern const struct vm_operations_struct generic_file_vm_ops;
-extern int __init init_rootfs(void);
-
-int ramfs_fill_super(struct super_block *sb, void *data, int silent);
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/ramoops.h b/ANDROID_3.4.5/include/linux/ramoops.h
deleted file mode 100644
index 484fef81..00000000
--- a/ANDROID_3.4.5/include/linux/ramoops.h
+++ /dev/null
@@ -1,17 +0,0 @@
-#ifndef __RAMOOPS_H
-#define __RAMOOPS_H
-
-/*
- * Ramoops platform data
- * @mem_size	memory size for ramoops
- * @mem_address	physical memory address to contain ramoops
- */
-
-struct ramoops_platform_data {
-	unsigned long	mem_size;
-	unsigned long	mem_address;
-	unsigned long	record_size;
-	int		dump_oops;
-};
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/random.h b/ANDROID_3.4.5/include/linux/random.h
deleted file mode 100644
index 8f74538c..00000000
--- a/ANDROID_3.4.5/include/linux/random.h
+++ /dev/null
@@ -1,109 +0,0 @@
-/*
- * include/linux/random.h
- *
- * Include file for the random number generator.
- */
-
-#ifndef _LINUX_RANDOM_H
-#define _LINUX_RANDOM_H
-
-#include <linux/types.h>
-#include <linux/ioctl.h>
-#include <linux/irqnr.h>
-
-/* ioctl()'s for the random number generator */
-
-/* Get the entropy count. */
-#define RNDGETENTCNT	_IOR( 'R', 0x00, int )
-
-/* Add to (or subtract from) the entropy count.  (Superuser only.) */
-#define RNDADDTOENTCNT	_IOW( 'R', 0x01, int )
-
-/* Get the contents of the entropy pool.  (Superuser only.) */
-#define RNDGETPOOL	_IOR( 'R', 0x02, int [2] )
-
-/* 
- * Write bytes into the entropy pool and add to the entropy count.
- * (Superuser only.)
- */
-#define RNDADDENTROPY	_IOW( 'R', 0x03, int [2] )
-
-/* Clear entropy count to 0.  (Superuser only.) */
-#define RNDZAPENTCNT	_IO( 'R', 0x04 )
-
-/* Clear the entropy pool and associated counters.  (Superuser only.) */
-#define RNDCLEARPOOL	_IO( 'R', 0x06 )
-
-struct rand_pool_info {
-	int	entropy_count;
-	int	buf_size;
-	__u32	buf[0];
-};
-
-struct rnd_state {
-	__u32 s1, s2, s3;
-};
-
-/* Exported functions */
-
-#ifdef __KERNEL__
-
-extern void rand_initialize_irq(int irq);
-
-extern void add_input_randomness(unsigned int type, unsigned int code,
-				 unsigned int value);
-extern void add_interrupt_randomness(int irq);
-
-extern void get_random_bytes(void *buf, int nbytes);
-void generate_random_uuid(unsigned char uuid_out[16]);
-
-#ifndef MODULE
-extern const struct file_operations random_fops, urandom_fops;
-#endif
-
-unsigned int get_random_int(void);
-unsigned long randomize_range(unsigned long start, unsigned long end, unsigned long len);
-
-u32 random32(void);
-void srandom32(u32 seed);
-
-u32 prandom32(struct rnd_state *);
-
-/*
- * Handle minimum values for seeds
- */
-static inline u32 __seed(u32 x, u32 m)
-{
-	return (x < m) ? x + m : x;
-}
-
-/**
- * prandom32_seed - set seed for prandom32().
- * @state: pointer to state structure to receive the seed.
- * @seed: arbitrary 64-bit value to use as a seed.
- */
-static inline void prandom32_seed(struct rnd_state *state, u64 seed)
-{
-	u32 i = (seed >> 32) ^ (seed << 10) ^ seed;
-
-	state->s1 = __seed(i, 1);
-	state->s2 = __seed(i, 7);
-	state->s3 = __seed(i, 15);
-}
-
-#ifdef CONFIG_ARCH_RANDOM
-# include <asm/archrandom.h>
-#else
-static inline int arch_get_random_long(unsigned long *v)
-{
-	return 0;
-}
-static inline int arch_get_random_int(unsigned int *v)
-{
-	return 0;
-}
-#endif
-
-#endif /* __KERNEL___ */
-
-#endif /* _LINUX_RANDOM_H */
diff --git a/ANDROID_3.4.5/include/linux/range.h b/ANDROID_3.4.5/include/linux/range.h
deleted file mode 100644
index bd184a5d..00000000
--- a/ANDROID_3.4.5/include/linux/range.h
+++ /dev/null
@@ -1,30 +0,0 @@
-#ifndef _LINUX_RANGE_H
-#define _LINUX_RANGE_H
-
-struct range {
-	u64   start;
-	u64   end;
-};
-
-int add_range(struct range *range, int az, int nr_range,
-		u64 start, u64 end);
-
-
-int add_range_with_merge(struct range *range, int az, int nr_range,
-				u64 start, u64 end);
-
-void subtract_range(struct range *range, int az, u64 start, u64 end);
-
-int clean_sort_range(struct range *range, int az);
-
-void sort_range(struct range *range, int nr_range);
-
-#define MAX_RESOURCE ((resource_size_t)~0)
-static inline resource_size_t cap_resource(u64 val)
-{
-	if (val > MAX_RESOURCE)
-		return MAX_RESOURCE;
-
-	return val;
-}
-#endif
diff --git a/ANDROID_3.4.5/include/linux/ratelimit.h b/ANDROID_3.4.5/include/linux/ratelimit.h
deleted file mode 100644
index e11ccb4c..00000000
--- a/ANDROID_3.4.5/include/linux/ratelimit.h
+++ /dev/null
@@ -1,84 +0,0 @@
-#ifndef _LINUX_RATELIMIT_H
-#define _LINUX_RATELIMIT_H
-
-#include <linux/param.h>
-#include <linux/spinlock.h>
-
-#define DEFAULT_RATELIMIT_INTERVAL	(5 * HZ)
-#define DEFAULT_RATELIMIT_BURST		10
-
-struct ratelimit_state {
-	raw_spinlock_t	lock;		/* protect the state */
-
-	int		interval;
-	int		burst;
-	int		printed;
-	int		missed;
-	unsigned long	begin;
-};
-
-#define DEFINE_RATELIMIT_STATE(name, interval_init, burst_init)		\
-									\
-	struct ratelimit_state name = {					\
-		.lock		= __RAW_SPIN_LOCK_UNLOCKED(name.lock),	\
-		.interval	= interval_init,			\
-		.burst		= burst_init,				\
-	}
-
-static inline void ratelimit_state_init(struct ratelimit_state *rs,
-					int interval, int burst)
-{
-	raw_spin_lock_init(&rs->lock);
-	rs->interval = interval;
-	rs->burst = burst;
-	rs->printed = 0;
-	rs->missed = 0;
-	rs->begin = 0;
-}
-
-extern struct ratelimit_state printk_ratelimit_state;
-
-extern int ___ratelimit(struct ratelimit_state *rs, const char *func);
-#define __ratelimit(state) ___ratelimit(state, __func__)
-
-#ifdef CONFIG_PRINTK
-
-#define WARN_ON_RATELIMIT(condition, state)			\
-		WARN_ON((condition) && __ratelimit(state))
-
-#define __WARN_RATELIMIT(condition, state, format...)		\
-({								\
-	int rtn = 0;						\
-	if (unlikely(__ratelimit(state)))			\
-		rtn = WARN(condition, format);			\
-	rtn;							\
-})
-
-#define WARN_RATELIMIT(condition, format...)			\
-({								\
-	static DEFINE_RATELIMIT_STATE(_rs,			\
-				      DEFAULT_RATELIMIT_INTERVAL,	\
-				      DEFAULT_RATELIMIT_BURST);	\
-	__WARN_RATELIMIT(condition, &_rs, format);		\
-})
-
-#else
-
-#define WARN_ON_RATELIMIT(condition, state)			\
-	WARN_ON(condition)
-
-#define __WARN_RATELIMIT(condition, state, format...)		\
-({								\
-	int rtn = WARN(condition, format);			\
-	rtn;							\
-})
-
-#define WARN_RATELIMIT(condition, format...)			\
-({								\
-	int rtn = WARN(condition, format);			\
-	rtn;							\
-})
-
-#endif
-
-#endif /* _LINUX_RATELIMIT_H */
diff --git a/ANDROID_3.4.5/include/linux/rational.h b/ANDROID_3.4.5/include/linux/rational.h
deleted file mode 100644
index 4f532fcd..00000000
--- a/ANDROID_3.4.5/include/linux/rational.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * rational fractions
- *
- * Copyright (C) 2009 emlix GmbH, Oskar Schirmer <os@emlix.com>
- *
- * helper functions when coping with rational numbers,
- * e.g. when calculating optimum numerator/denominator pairs for
- * pll configuration taking into account restricted register size
- */
-
-#ifndef _LINUX_RATIONAL_H
-#define _LINUX_RATIONAL_H
-
-void rational_best_approximation(
-	unsigned long given_numerator, unsigned long given_denominator,
-	unsigned long max_numerator, unsigned long max_denominator,
-	unsigned long *best_numerator, unsigned long *best_denominator);
-
-#endif /* _LINUX_RATIONAL_H */
diff --git a/ANDROID_3.4.5/include/linux/raw.h b/ANDROID_3.4.5/include/linux/raw.h
deleted file mode 100644
index 62d543e7..00000000
--- a/ANDROID_3.4.5/include/linux/raw.h
+++ /dev/null
@@ -1,18 +0,0 @@
-#ifndef __LINUX_RAW_H
-#define __LINUX_RAW_H
-
-#include <linux/types.h>
-
-#define RAW_SETBIND	_IO( 0xac, 0 )
-#define RAW_GETBIND	_IO( 0xac, 1 )
-
-struct raw_config_request 
-{
-	int	raw_minor;
-	__u64	block_major;
-	__u64	block_minor;
-};
-
-#define MAX_RAW_MINORS CONFIG_MAX_RAW_DEVS
-
-#endif /* __LINUX_RAW_H */
diff --git a/ANDROID_3.4.5/include/linux/rbtree.h b/ANDROID_3.4.5/include/linux/rbtree.h
deleted file mode 100644
index 033b507b..00000000
--- a/ANDROID_3.4.5/include/linux/rbtree.h
+++ /dev/null
@@ -1,177 +0,0 @@
-/*
-  Red Black Trees
-  (C) 1999  Andrea Arcangeli <andrea@suse.de>
-  
-  This program is free software; you can redistribute it and/or modify
-  it under the terms of the GNU General Public License as published by
-  the Free Software Foundation; either version 2 of the License, or
-  (at your option) any later version.
-
-  This program is distributed in the hope that it will be useful,
-  but WITHOUT ANY WARRANTY; without even the implied warranty of
-  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-  GNU General Public License for more details.
-
-  You should have received a copy of the GNU General Public License
-  along with this program; if not, write to the Free Software
-  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-
-  linux/include/linux/rbtree.h
-
-  To use rbtrees you'll have to implement your own insert and search cores.
-  This will avoid us to use callbacks and to drop drammatically performances.
-  I know it's not the cleaner way,  but in C (not in C++) to get
-  performances and genericity...
-
-  Some example of insert and search follows here. The search is a plain
-  normal search over an ordered tree. The insert instead must be implemented
-  in two steps: First, the code must insert the element in order as a red leaf
-  in the tree, and then the support library function rb_insert_color() must
-  be called. Such function will do the not trivial work to rebalance the
-  rbtree, if necessary.
-
------------------------------------------------------------------------
-static inline struct page * rb_search_page_cache(struct inode * inode,
-						 unsigned long offset)
-{
-	struct rb_node * n = inode->i_rb_page_cache.rb_node;
-	struct page * page;
-
-	while (n)
-	{
-		page = rb_entry(n, struct page, rb_page_cache);
-
-		if (offset < page->offset)
-			n = n->rb_left;
-		else if (offset > page->offset)
-			n = n->rb_right;
-		else
-			return page;
-	}
-	return NULL;
-}
-
-static inline struct page * __rb_insert_page_cache(struct inode * inode,
-						   unsigned long offset,
-						   struct rb_node * node)
-{
-	struct rb_node ** p = &inode->i_rb_page_cache.rb_node;
-	struct rb_node * parent = NULL;
-	struct page * page;
-
-	while (*p)
-	{
-		parent = *p;
-		page = rb_entry(parent, struct page, rb_page_cache);
-
-		if (offset < page->offset)
-			p = &(*p)->rb_left;
-		else if (offset > page->offset)
-			p = &(*p)->rb_right;
-		else
-			return page;
-	}
-
-	rb_link_node(node, parent, p);
-
-	return NULL;
-}
-
-static inline struct page * rb_insert_page_cache(struct inode * inode,
-						 unsigned long offset,
-						 struct rb_node * node)
-{
-	struct page * ret;
-	if ((ret = __rb_insert_page_cache(inode, offset, node)))
-		goto out;
-	rb_insert_color(node, &inode->i_rb_page_cache);
- out:
-	return ret;
-}
------------------------------------------------------------------------
-*/
-
-#ifndef	_LINUX_RBTREE_H
-#define	_LINUX_RBTREE_H
-
-#include <linux/kernel.h>
-#include <linux/stddef.h>
-
-struct rb_node
-{
-	unsigned long  rb_parent_color;
-#define	RB_RED		0
-#define	RB_BLACK	1
-	struct rb_node *rb_right;
-	struct rb_node *rb_left;
-} __attribute__((aligned(sizeof(long))));
-    /* The alignment might seem pointless, but allegedly CRIS needs it */
-
-struct rb_root
-{
-	struct rb_node *rb_node;
-};
-
-
-#define rb_parent(r)   ((struct rb_node *)((r)->rb_parent_color & ~3))
-#define rb_color(r)   ((r)->rb_parent_color & 1)
-#define rb_is_red(r)   (!rb_color(r))
-#define rb_is_black(r) rb_color(r)
-#define rb_set_red(r)  do { (r)->rb_parent_color &= ~1; } while (0)
-#define rb_set_black(r)  do { (r)->rb_parent_color |= 1; } while (0)
-
-static inline void rb_set_parent(struct rb_node *rb, struct rb_node *p)
-{
-	rb->rb_parent_color = (rb->rb_parent_color & 3) | (unsigned long)p;
-}
-static inline void rb_set_color(struct rb_node *rb, int color)
-{
-	rb->rb_parent_color = (rb->rb_parent_color & ~1) | color;
-}
-
-#define RB_ROOT	(struct rb_root) { NULL, }
-#define	rb_entry(ptr, type, member) container_of(ptr, type, member)
-
-#define RB_EMPTY_ROOT(root)	((root)->rb_node == NULL)
-#define RB_EMPTY_NODE(node)	(rb_parent(node) == node)
-#define RB_CLEAR_NODE(node)	(rb_set_parent(node, node))
-
-static inline void rb_init_node(struct rb_node *rb)
-{
-	rb->rb_parent_color = 0;
-	rb->rb_right = NULL;
-	rb->rb_left = NULL;
-	RB_CLEAR_NODE(rb);
-}
-
-extern void rb_insert_color(struct rb_node *, struct rb_root *);
-extern void rb_erase(struct rb_node *, struct rb_root *);
-
-typedef void (*rb_augment_f)(struct rb_node *node, void *data);
-
-extern void rb_augment_insert(struct rb_node *node,
-			      rb_augment_f func, void *data);
-extern struct rb_node *rb_augment_erase_begin(struct rb_node *node);
-extern void rb_augment_erase_end(struct rb_node *node,
-				 rb_augment_f func, void *data);
-
-/* Find logical next and previous nodes in a tree */
-extern struct rb_node *rb_next(const struct rb_node *);
-extern struct rb_node *rb_prev(const struct rb_node *);
-extern struct rb_node *rb_first(const struct rb_root *);
-extern struct rb_node *rb_last(const struct rb_root *);
-
-/* Fast replacement of a single node without remove/rebalance/add/rebalance */
-extern void rb_replace_node(struct rb_node *victim, struct rb_node *new, 
-			    struct rb_root *root);
-
-static inline void rb_link_node(struct rb_node * node, struct rb_node * parent,
-				struct rb_node ** rb_link)
-{
-	node->rb_parent_color = (unsigned long )parent;
-	node->rb_left = node->rb_right = NULL;
-
-	*rb_link = node;
-}
-
-#endif	/* _LINUX_RBTREE_H */
diff --git a/ANDROID_3.4.5/include/linux/rculist.h b/ANDROID_3.4.5/include/linux/rculist.h
deleted file mode 100644
index d0792908..00000000
--- a/ANDROID_3.4.5/include/linux/rculist.h
+++ /dev/null
@@ -1,493 +0,0 @@
-#ifndef _LINUX_RCULIST_H
-#define _LINUX_RCULIST_H
-
-#ifdef __KERNEL__
-
-/*
- * RCU-protected list version
- */
-#include <linux/list.h>
-#include <linux/rcupdate.h>
-
-/*
- * Why is there no list_empty_rcu()?  Because list_empty() serves this
- * purpose.  The list_empty() function fetches the RCU-protected pointer
- * and compares it to the address of the list head, but neither dereferences
- * this pointer itself nor provides this pointer to the caller.  Therefore,
- * it is not necessary to use rcu_dereference(), so that list_empty() can
- * be used anywhere you would want to use a list_empty_rcu().
- */
-
-/*
- * return the ->next pointer of a list_head in an rcu safe
- * way, we must not access it directly
- */
-#define list_next_rcu(list)	(*((struct list_head __rcu **)(&(list)->next)))
-
-/*
- * Insert a new entry between two known consecutive entries.
- *
- * This is only for internal list manipulation where we know
- * the prev/next entries already!
- */
-static inline void __list_add_rcu(struct list_head *new,
-		struct list_head *prev, struct list_head *next)
-{
-	new->next = next;
-	new->prev = prev;
-	rcu_assign_pointer(list_next_rcu(prev), new);
-	next->prev = new;
-}
-
-/**
- * list_add_rcu - add a new entry to rcu-protected list
- * @new: new entry to be added
- * @head: list head to add it after
- *
- * Insert a new entry after the specified head.
- * This is good for implementing stacks.
- *
- * The caller must take whatever precautions are necessary
- * (such as holding appropriate locks) to avoid racing
- * with another list-mutation primitive, such as list_add_rcu()
- * or list_del_rcu(), running on this same list.
- * However, it is perfectly legal to run concurrently with
- * the _rcu list-traversal primitives, such as
- * list_for_each_entry_rcu().
- */
-static inline void list_add_rcu(struct list_head *new, struct list_head *head)
-{
-	__list_add_rcu(new, head, head->next);
-}
-
-/**
- * list_add_tail_rcu - add a new entry to rcu-protected list
- * @new: new entry to be added
- * @head: list head to add it before
- *
- * Insert a new entry before the specified head.
- * This is useful for implementing queues.
- *
- * The caller must take whatever precautions are necessary
- * (such as holding appropriate locks) to avoid racing
- * with another list-mutation primitive, such as list_add_tail_rcu()
- * or list_del_rcu(), running on this same list.
- * However, it is perfectly legal to run concurrently with
- * the _rcu list-traversal primitives, such as
- * list_for_each_entry_rcu().
- */
-static inline void list_add_tail_rcu(struct list_head *new,
-					struct list_head *head)
-{
-	__list_add_rcu(new, head->prev, head);
-}
-
-/**
- * list_del_rcu - deletes entry from list without re-initialization
- * @entry: the element to delete from the list.
- *
- * Note: list_empty() on entry does not return true after this,
- * the entry is in an undefined state. It is useful for RCU based
- * lockfree traversal.
- *
- * In particular, it means that we can not poison the forward
- * pointers that may still be used for walking the list.
- *
- * The caller must take whatever precautions are necessary
- * (such as holding appropriate locks) to avoid racing
- * with another list-mutation primitive, such as list_del_rcu()
- * or list_add_rcu(), running on this same list.
- * However, it is perfectly legal to run concurrently with
- * the _rcu list-traversal primitives, such as
- * list_for_each_entry_rcu().
- *
- * Note that the caller is not permitted to immediately free
- * the newly deleted entry.  Instead, either synchronize_rcu()
- * or call_rcu() must be used to defer freeing until an RCU
- * grace period has elapsed.
- */
-static inline void list_del_rcu(struct list_head *entry)
-{
-	__list_del(entry->prev, entry->next);
-	entry->prev = LIST_POISON2;
-}
-
-/**
- * hlist_del_init_rcu - deletes entry from hash list with re-initialization
- * @n: the element to delete from the hash list.
- *
- * Note: list_unhashed() on the node return true after this. It is
- * useful for RCU based read lockfree traversal if the writer side
- * must know if the list entry is still hashed or already unhashed.
- *
- * In particular, it means that we can not poison the forward pointers
- * that may still be used for walking the hash list and we can only
- * zero the pprev pointer so list_unhashed() will return true after
- * this.
- *
- * The caller must take whatever precautions are necessary (such as
- * holding appropriate locks) to avoid racing with another
- * list-mutation primitive, such as hlist_add_head_rcu() or
- * hlist_del_rcu(), running on this same list.  However, it is
- * perfectly legal to run concurrently with the _rcu list-traversal
- * primitives, such as hlist_for_each_entry_rcu().
- */
-static inline void hlist_del_init_rcu(struct hlist_node *n)
-{
-	if (!hlist_unhashed(n)) {
-		__hlist_del(n);
-		n->pprev = NULL;
-	}
-}
-
-/**
- * list_replace_rcu - replace old entry by new one
- * @old : the element to be replaced
- * @new : the new element to insert
- *
- * The @old entry will be replaced with the @new entry atomically.
- * Note: @old should not be empty.
- */
-static inline void list_replace_rcu(struct list_head *old,
-				struct list_head *new)
-{
-	new->next = old->next;
-	new->prev = old->prev;
-	rcu_assign_pointer(list_next_rcu(new->prev), new);
-	new->next->prev = new;
-	old->prev = LIST_POISON2;
-}
-
-/**
- * list_splice_init_rcu - splice an RCU-protected list into an existing list.
- * @list:	the RCU-protected list to splice
- * @head:	the place in the list to splice the first list into
- * @sync:	function to sync: synchronize_rcu(), synchronize_sched(), ...
- *
- * @head can be RCU-read traversed concurrently with this function.
- *
- * Note that this function blocks.
- *
- * Important note: the caller must take whatever action is necessary to
- *	prevent any other updates to @head.  In principle, it is possible
- *	to modify the list as soon as sync() begins execution.
- *	If this sort of thing becomes necessary, an alternative version
- *	based on call_rcu() could be created.  But only if -really-
- *	needed -- there is no shortage of RCU API members.
- */
-static inline void list_splice_init_rcu(struct list_head *list,
-					struct list_head *head,
-					void (*sync)(void))
-{
-	struct list_head *first = list->next;
-	struct list_head *last = list->prev;
-	struct list_head *at = head->next;
-
-	if (list_empty(list))
-		return;
-
-	/* "first" and "last" tracking list, so initialize it. */
-
-	INIT_LIST_HEAD(list);
-
-	/*
-	 * At this point, the list body still points to the source list.
-	 * Wait for any readers to finish using the list before splicing
-	 * the list body into the new list.  Any new readers will see
-	 * an empty list.
-	 */
-
-	sync();
-
-	/*
-	 * Readers are finished with the source list, so perform splice.
-	 * The order is important if the new list is global and accessible
-	 * to concurrent RCU readers.  Note that RCU readers are not
-	 * permitted to traverse the prev pointers without excluding
-	 * this function.
-	 */
-
-	last->next = at;
-	rcu_assign_pointer(list_next_rcu(head), first);
-	first->prev = head;
-	at->prev = last;
-}
-
-/**
- * list_entry_rcu - get the struct for this entry
- * @ptr:        the &struct list_head pointer.
- * @type:       the type of the struct this is embedded in.
- * @member:     the name of the list_struct within the struct.
- *
- * This primitive may safely run concurrently with the _rcu list-mutation
- * primitives such as list_add_rcu() as long as it's guarded by rcu_read_lock().
- */
-#define list_entry_rcu(ptr, type, member) \
-	({typeof (*ptr) __rcu *__ptr = (typeof (*ptr) __rcu __force *)ptr; \
-	 container_of((typeof(ptr))rcu_dereference_raw(__ptr), type, member); \
-	})
-
-/**
- * list_first_entry_rcu - get the first element from a list
- * @ptr:        the list head to take the element from.
- * @type:       the type of the struct this is embedded in.
- * @member:     the name of the list_struct within the struct.
- *
- * Note, that list is expected to be not empty.
- *
- * This primitive may safely run concurrently with the _rcu list-mutation
- * primitives such as list_add_rcu() as long as it's guarded by rcu_read_lock().
- */
-#define list_first_entry_rcu(ptr, type, member) \
-	list_entry_rcu((ptr)->next, type, member)
-
-/**
- * list_for_each_entry_rcu	-	iterate over rcu list of given type
- * @pos:	the type * to use as a loop cursor.
- * @head:	the head for your list.
- * @member:	the name of the list_struct within the struct.
- *
- * This list-traversal primitive may safely run concurrently with
- * the _rcu list-mutation primitives such as list_add_rcu()
- * as long as the traversal is guarded by rcu_read_lock().
- */
-#define list_for_each_entry_rcu(pos, head, member) \
-	for (pos = list_entry_rcu((head)->next, typeof(*pos), member); \
-		&pos->member != (head); \
-		pos = list_entry_rcu(pos->member.next, typeof(*pos), member))
-
-
-/**
- * list_for_each_continue_rcu
- * @pos:	the &struct list_head to use as a loop cursor.
- * @head:	the head for your list.
- *
- * Iterate over an rcu-protected list, continuing after current point.
- *
- * This list-traversal primitive may safely run concurrently with
- * the _rcu list-mutation primitives such as list_add_rcu()
- * as long as the traversal is guarded by rcu_read_lock().
- */
-#define list_for_each_continue_rcu(pos, head) \
-	for ((pos) = rcu_dereference_raw(list_next_rcu(pos)); \
-		(pos) != (head); \
-		(pos) = rcu_dereference_raw(list_next_rcu(pos)))
-
-/**
- * list_for_each_entry_continue_rcu - continue iteration over list of given type
- * @pos:	the type * to use as a loop cursor.
- * @head:	the head for your list.
- * @member:	the name of the list_struct within the struct.
- *
- * Continue to iterate over list of given type, continuing after
- * the current position.
- */
-#define list_for_each_entry_continue_rcu(pos, head, member) 		\
-	for (pos = list_entry_rcu(pos->member.next, typeof(*pos), member); \
-	     &pos->member != (head);	\
-	     pos = list_entry_rcu(pos->member.next, typeof(*pos), member))
-
-/**
- * hlist_del_rcu - deletes entry from hash list without re-initialization
- * @n: the element to delete from the hash list.
- *
- * Note: list_unhashed() on entry does not return true after this,
- * the entry is in an undefined state. It is useful for RCU based
- * lockfree traversal.
- *
- * In particular, it means that we can not poison the forward
- * pointers that may still be used for walking the hash list.
- *
- * The caller must take whatever precautions are necessary
- * (such as holding appropriate locks) to avoid racing
- * with another list-mutation primitive, such as hlist_add_head_rcu()
- * or hlist_del_rcu(), running on this same list.
- * However, it is perfectly legal to run concurrently with
- * the _rcu list-traversal primitives, such as
- * hlist_for_each_entry().
- */
-static inline void hlist_del_rcu(struct hlist_node *n)
-{
-	__hlist_del(n);
-	n->pprev = LIST_POISON2;
-}
-
-/**
- * hlist_replace_rcu - replace old entry by new one
- * @old : the element to be replaced
- * @new : the new element to insert
- *
- * The @old entry will be replaced with the @new entry atomically.
- */
-static inline void hlist_replace_rcu(struct hlist_node *old,
-					struct hlist_node *new)
-{
-	struct hlist_node *next = old->next;
-
-	new->next = next;
-	new->pprev = old->pprev;
-	rcu_assign_pointer(*(struct hlist_node __rcu **)new->pprev, new);
-	if (next)
-		new->next->pprev = &new->next;
-	old->pprev = LIST_POISON2;
-}
-
-/*
- * return the first or the next element in an RCU protected hlist
- */
-#define hlist_first_rcu(head)	(*((struct hlist_node __rcu **)(&(head)->first)))
-#define hlist_next_rcu(node)	(*((struct hlist_node __rcu **)(&(node)->next)))
-#define hlist_pprev_rcu(node)	(*((struct hlist_node __rcu **)((node)->pprev)))
-
-/**
- * hlist_add_head_rcu
- * @n: the element to add to the hash list.
- * @h: the list to add to.
- *
- * Description:
- * Adds the specified element to the specified hlist,
- * while permitting racing traversals.
- *
- * The caller must take whatever precautions are necessary
- * (such as holding appropriate locks) to avoid racing
- * with another list-mutation primitive, such as hlist_add_head_rcu()
- * or hlist_del_rcu(), running on this same list.
- * However, it is perfectly legal to run concurrently with
- * the _rcu list-traversal primitives, such as
- * hlist_for_each_entry_rcu(), used to prevent memory-consistency
- * problems on Alpha CPUs.  Regardless of the type of CPU, the
- * list-traversal primitive must be guarded by rcu_read_lock().
- */
-static inline void hlist_add_head_rcu(struct hlist_node *n,
-					struct hlist_head *h)
-{
-	struct hlist_node *first = h->first;
-
-	n->next = first;
-	n->pprev = &h->first;
-	rcu_assign_pointer(hlist_first_rcu(h), n);
-	if (first)
-		first->pprev = &n->next;
-}
-
-/**
- * hlist_add_before_rcu
- * @n: the new element to add to the hash list.
- * @next: the existing element to add the new element before.
- *
- * Description:
- * Adds the specified element to the specified hlist
- * before the specified node while permitting racing traversals.
- *
- * The caller must take whatever precautions are necessary
- * (such as holding appropriate locks) to avoid racing
- * with another list-mutation primitive, such as hlist_add_head_rcu()
- * or hlist_del_rcu(), running on this same list.
- * However, it is perfectly legal to run concurrently with
- * the _rcu list-traversal primitives, such as
- * hlist_for_each_entry_rcu(), used to prevent memory-consistency
- * problems on Alpha CPUs.
- */
-static inline void hlist_add_before_rcu(struct hlist_node *n,
-					struct hlist_node *next)
-{
-	n->pprev = next->pprev;
-	n->next = next;
-	rcu_assign_pointer(hlist_pprev_rcu(n), n);
-	next->pprev = &n->next;
-}
-
-/**
- * hlist_add_after_rcu
- * @prev: the existing element to add the new element after.
- * @n: the new element to add to the hash list.
- *
- * Description:
- * Adds the specified element to the specified hlist
- * after the specified node while permitting racing traversals.
- *
- * The caller must take whatever precautions are necessary
- * (such as holding appropriate locks) to avoid racing
- * with another list-mutation primitive, such as hlist_add_head_rcu()
- * or hlist_del_rcu(), running on this same list.
- * However, it is perfectly legal to run concurrently with
- * the _rcu list-traversal primitives, such as
- * hlist_for_each_entry_rcu(), used to prevent memory-consistency
- * problems on Alpha CPUs.
- */
-static inline void hlist_add_after_rcu(struct hlist_node *prev,
-				       struct hlist_node *n)
-{
-	n->next = prev->next;
-	n->pprev = &prev->next;
-	rcu_assign_pointer(hlist_next_rcu(prev), n);
-	if (n->next)
-		n->next->pprev = &n->next;
-}
-
-#define __hlist_for_each_rcu(pos, head)				\
-	for (pos = rcu_dereference(hlist_first_rcu(head));	\
-	     pos;						\
-	     pos = rcu_dereference(hlist_next_rcu(pos)))
-
-/**
- * hlist_for_each_entry_rcu - iterate over rcu list of given type
- * @tpos:	the type * to use as a loop cursor.
- * @pos:	the &struct hlist_node to use as a loop cursor.
- * @head:	the head for your list.
- * @member:	the name of the hlist_node within the struct.
- *
- * This list-traversal primitive may safely run concurrently with
- * the _rcu list-mutation primitives such as hlist_add_head_rcu()
- * as long as the traversal is guarded by rcu_read_lock().
- */
-#define hlist_for_each_entry_rcu(tpos, pos, head, member)		\
-	for (pos = rcu_dereference_raw(hlist_first_rcu(head));		\
-		pos &&							 \
-		({ tpos = hlist_entry(pos, typeof(*tpos), member); 1; }); \
-		pos = rcu_dereference_raw(hlist_next_rcu(pos)))
-
-/**
- * hlist_for_each_entry_rcu_bh - iterate over rcu list of given type
- * @tpos:	the type * to use as a loop cursor.
- * @pos:	the &struct hlist_node to use as a loop cursor.
- * @head:	the head for your list.
- * @member:	the name of the hlist_node within the struct.
- *
- * This list-traversal primitive may safely run concurrently with
- * the _rcu list-mutation primitives such as hlist_add_head_rcu()
- * as long as the traversal is guarded by rcu_read_lock().
- */
-#define hlist_for_each_entry_rcu_bh(tpos, pos, head, member)		 \
-	for (pos = rcu_dereference_bh((head)->first);			 \
-		pos &&							 \
-		({ tpos = hlist_entry(pos, typeof(*tpos), member); 1; }); \
-		pos = rcu_dereference_bh(pos->next))
-
-/**
- * hlist_for_each_entry_continue_rcu - iterate over a hlist continuing after current point
- * @tpos:	the type * to use as a loop cursor.
- * @pos:	the &struct hlist_node to use as a loop cursor.
- * @member:	the name of the hlist_node within the struct.
- */
-#define hlist_for_each_entry_continue_rcu(tpos, pos, member)		\
-	for (pos = rcu_dereference((pos)->next);			\
-	     pos &&							\
-	     ({ tpos = hlist_entry(pos, typeof(*tpos), member); 1; });  \
-	     pos = rcu_dereference(pos->next))
-
-/**
- * hlist_for_each_entry_continue_rcu_bh - iterate over a hlist continuing after current point
- * @tpos:	the type * to use as a loop cursor.
- * @pos:	the &struct hlist_node to use as a loop cursor.
- * @member:	the name of the hlist_node within the struct.
- */
-#define hlist_for_each_entry_continue_rcu_bh(tpos, pos, member)		\
-	for (pos = rcu_dereference_bh((pos)->next);			\
-	     pos &&							\
-	     ({ tpos = hlist_entry(pos, typeof(*tpos), member); 1; });  \
-	     pos = rcu_dereference_bh(pos->next))
-
-
-#endif	/* __KERNEL__ */
-#endif
diff --git a/ANDROID_3.4.5/include/linux/rculist_bl.h b/ANDROID_3.4.5/include/linux/rculist_bl.h
deleted file mode 100644
index cf1244fb..00000000
--- a/ANDROID_3.4.5/include/linux/rculist_bl.h
+++ /dev/null
@@ -1,128 +0,0 @@
-#ifndef _LINUX_RCULIST_BL_H
-#define _LINUX_RCULIST_BL_H
-
-/*
- * RCU-protected bl list version. See include/linux/list_bl.h.
- */
-#include <linux/list_bl.h>
-#include <linux/rcupdate.h>
-
-static inline void hlist_bl_set_first_rcu(struct hlist_bl_head *h,
-					struct hlist_bl_node *n)
-{
-	LIST_BL_BUG_ON((unsigned long)n & LIST_BL_LOCKMASK);
-	LIST_BL_BUG_ON(((unsigned long)h->first & LIST_BL_LOCKMASK) !=
-							LIST_BL_LOCKMASK);
-	rcu_assign_pointer(h->first,
-		(struct hlist_bl_node *)((unsigned long)n | LIST_BL_LOCKMASK));
-}
-
-static inline struct hlist_bl_node *hlist_bl_first_rcu(struct hlist_bl_head *h)
-{
-	return (struct hlist_bl_node *)
-		((unsigned long)rcu_dereference(h->first) & ~LIST_BL_LOCKMASK);
-}
-
-/**
- * hlist_bl_del_init_rcu - deletes entry from hash list with re-initialization
- * @n: the element to delete from the hash list.
- *
- * Note: hlist_bl_unhashed() on the node returns true after this. It is
- * useful for RCU based read lockfree traversal if the writer side
- * must know if the list entry is still hashed or already unhashed.
- *
- * In particular, it means that we can not poison the forward pointers
- * that may still be used for walking the hash list and we can only
- * zero the pprev pointer so list_unhashed() will return true after
- * this.
- *
- * The caller must take whatever precautions are necessary (such as
- * holding appropriate locks) to avoid racing with another
- * list-mutation primitive, such as hlist_bl_add_head_rcu() or
- * hlist_bl_del_rcu(), running on this same list.  However, it is
- * perfectly legal to run concurrently with the _rcu list-traversal
- * primitives, such as hlist_bl_for_each_entry_rcu().
- */
-static inline void hlist_bl_del_init_rcu(struct hlist_bl_node *n)
-{
-	if (!hlist_bl_unhashed(n)) {
-		__hlist_bl_del(n);
-		n->pprev = NULL;
-	}
-}
-
-/**
- * hlist_bl_del_rcu - deletes entry from hash list without re-initialization
- * @n: the element to delete from the hash list.
- *
- * Note: hlist_bl_unhashed() on entry does not return true after this,
- * the entry is in an undefined state. It is useful for RCU based
- * lockfree traversal.
- *
- * In particular, it means that we can not poison the forward
- * pointers that may still be used for walking the hash list.
- *
- * The caller must take whatever precautions are necessary
- * (such as holding appropriate locks) to avoid racing
- * with another list-mutation primitive, such as hlist_bl_add_head_rcu()
- * or hlist_bl_del_rcu(), running on this same list.
- * However, it is perfectly legal to run concurrently with
- * the _rcu list-traversal primitives, such as
- * hlist_bl_for_each_entry().
- */
-static inline void hlist_bl_del_rcu(struct hlist_bl_node *n)
-{
-	__hlist_bl_del(n);
-	n->pprev = LIST_POISON2;
-}
-
-/**
- * hlist_bl_add_head_rcu
- * @n: the element to add to the hash list.
- * @h: the list to add to.
- *
- * Description:
- * Adds the specified element to the specified hlist_bl,
- * while permitting racing traversals.
- *
- * The caller must take whatever precautions are necessary
- * (such as holding appropriate locks) to avoid racing
- * with another list-mutation primitive, such as hlist_bl_add_head_rcu()
- * or hlist_bl_del_rcu(), running on this same list.
- * However, it is perfectly legal to run concurrently with
- * the _rcu list-traversal primitives, such as
- * hlist_bl_for_each_entry_rcu(), used to prevent memory-consistency
- * problems on Alpha CPUs.  Regardless of the type of CPU, the
- * list-traversal primitive must be guarded by rcu_read_lock().
- */
-static inline void hlist_bl_add_head_rcu(struct hlist_bl_node *n,
-					struct hlist_bl_head *h)
-{
-	struct hlist_bl_node *first;
-
-	/* don't need hlist_bl_first_rcu because we're under lock */
-	first = hlist_bl_first(h);
-
-	n->next = first;
-	if (first)
-		first->pprev = &n->next;
-	n->pprev = &h->first;
-
-	/* need _rcu because we can have concurrent lock free readers */
-	hlist_bl_set_first_rcu(h, n);
-}
-/**
- * hlist_bl_for_each_entry_rcu - iterate over rcu list of given type
- * @tpos:	the type * to use as a loop cursor.
- * @pos:	the &struct hlist_bl_node to use as a loop cursor.
- * @head:	the head for your list.
- * @member:	the name of the hlist_bl_node within the struct.
- *
- */
-#define hlist_bl_for_each_entry_rcu(tpos, pos, head, member)		\
-	for (pos = hlist_bl_first_rcu(head);				\
-		pos &&							\
-		({ tpos = hlist_bl_entry(pos, typeof(*tpos), member); 1; }); \
-		pos = rcu_dereference_raw(pos->next))
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/rculist_nulls.h b/ANDROID_3.4.5/include/linux/rculist_nulls.h
deleted file mode 100644
index 2ae13714..00000000
--- a/ANDROID_3.4.5/include/linux/rculist_nulls.h
+++ /dev/null
@@ -1,116 +0,0 @@
-#ifndef _LINUX_RCULIST_NULLS_H
-#define _LINUX_RCULIST_NULLS_H
-
-#ifdef __KERNEL__
-
-/*
- * RCU-protected list version
- */
-#include <linux/list_nulls.h>
-#include <linux/rcupdate.h>
-
-/**
- * hlist_nulls_del_init_rcu - deletes entry from hash list with re-initialization
- * @n: the element to delete from the hash list.
- *
- * Note: hlist_nulls_unhashed() on the node return true after this. It is
- * useful for RCU based read lockfree traversal if the writer side
- * must know if the list entry is still hashed or already unhashed.
- *
- * In particular, it means that we can not poison the forward pointers
- * that may still be used for walking the hash list and we can only
- * zero the pprev pointer so list_unhashed() will return true after
- * this.
- *
- * The caller must take whatever precautions are necessary (such as
- * holding appropriate locks) to avoid racing with another
- * list-mutation primitive, such as hlist_nulls_add_head_rcu() or
- * hlist_nulls_del_rcu(), running on this same list.  However, it is
- * perfectly legal to run concurrently with the _rcu list-traversal
- * primitives, such as hlist_nulls_for_each_entry_rcu().
- */
-static inline void hlist_nulls_del_init_rcu(struct hlist_nulls_node *n)
-{
-	if (!hlist_nulls_unhashed(n)) {
-		__hlist_nulls_del(n);
-		n->pprev = NULL;
-	}
-}
-
-#define hlist_nulls_first_rcu(head) \
-	(*((struct hlist_nulls_node __rcu __force **)&(head)->first))
-
-#define hlist_nulls_next_rcu(node) \
-	(*((struct hlist_nulls_node __rcu __force **)&(node)->next))
-
-/**
- * hlist_nulls_del_rcu - deletes entry from hash list without re-initialization
- * @n: the element to delete from the hash list.
- *
- * Note: hlist_nulls_unhashed() on entry does not return true after this,
- * the entry is in an undefined state. It is useful for RCU based
- * lockfree traversal.
- *
- * In particular, it means that we can not poison the forward
- * pointers that may still be used for walking the hash list.
- *
- * The caller must take whatever precautions are necessary
- * (such as holding appropriate locks) to avoid racing
- * with another list-mutation primitive, such as hlist_nulls_add_head_rcu()
- * or hlist_nulls_del_rcu(), running on this same list.
- * However, it is perfectly legal to run concurrently with
- * the _rcu list-traversal primitives, such as
- * hlist_nulls_for_each_entry().
- */
-static inline void hlist_nulls_del_rcu(struct hlist_nulls_node *n)
-{
-	__hlist_nulls_del(n);
-	n->pprev = LIST_POISON2;
-}
-
-/**
- * hlist_nulls_add_head_rcu
- * @n: the element to add to the hash list.
- * @h: the list to add to.
- *
- * Description:
- * Adds the specified element to the specified hlist_nulls,
- * while permitting racing traversals.
- *
- * The caller must take whatever precautions are necessary
- * (such as holding appropriate locks) to avoid racing
- * with another list-mutation primitive, such as hlist_nulls_add_head_rcu()
- * or hlist_nulls_del_rcu(), running on this same list.
- * However, it is perfectly legal to run concurrently with
- * the _rcu list-traversal primitives, such as
- * hlist_nulls_for_each_entry_rcu(), used to prevent memory-consistency
- * problems on Alpha CPUs.  Regardless of the type of CPU, the
- * list-traversal primitive must be guarded by rcu_read_lock().
- */
-static inline void hlist_nulls_add_head_rcu(struct hlist_nulls_node *n,
-					struct hlist_nulls_head *h)
-{
-	struct hlist_nulls_node *first = h->first;
-
-	n->next = first;
-	n->pprev = &h->first;
-	rcu_assign_pointer(hlist_nulls_first_rcu(h), n);
-	if (!is_a_nulls(first))
-		first->pprev = &n->next;
-}
-/**
- * hlist_nulls_for_each_entry_rcu - iterate over rcu list of given type
- * @tpos:	the type * to use as a loop cursor.
- * @pos:	the &struct hlist_nulls_node to use as a loop cursor.
- * @head:	the head for your list.
- * @member:	the name of the hlist_nulls_node within the struct.
- *
- */
-#define hlist_nulls_for_each_entry_rcu(tpos, pos, head, member)			\
-	for (pos = rcu_dereference_raw(hlist_nulls_first_rcu(head));		\
-		(!is_a_nulls(pos)) &&						\
-		({ tpos = hlist_nulls_entry(pos, typeof(*tpos), member); 1; }); \
-		pos = rcu_dereference_raw(hlist_nulls_next_rcu(pos)))
-
-#endif
-#endif
diff --git a/ANDROID_3.4.5/include/linux/rcupdate.h b/ANDROID_3.4.5/include/linux/rcupdate.h
deleted file mode 100644
index 20fb776a..00000000
--- a/ANDROID_3.4.5/include/linux/rcupdate.h
+++ /dev/null
@@ -1,951 +0,0 @@
-/*
- * Read-Copy Update mechanism for mutual exclusion
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- *
- * Copyright IBM Corporation, 2001
- *
- * Author: Dipankar Sarma <dipankar@in.ibm.com>
- *
- * Based on the original work by Paul McKenney <paulmck@us.ibm.com>
- * and inputs from Rusty Russell, Andrea Arcangeli and Andi Kleen.
- * Papers:
- * http://www.rdrop.com/users/paulmck/paper/rclockpdcsproof.pdf
- * http://lse.sourceforge.net/locking/rclock_OLS.2001.05.01c.sc.pdf (OLS2001)
- *
- * For detailed explanation of Read-Copy Update mechanism see -
- *		http://lse.sourceforge.net/locking/rcupdate.html
- *
- */
-
-#ifndef __LINUX_RCUPDATE_H
-#define __LINUX_RCUPDATE_H
-
-#include <linux/types.h>
-#include <linux/cache.h>
-#include <linux/spinlock.h>
-#include <linux/threads.h>
-#include <linux/cpumask.h>
-#include <linux/seqlock.h>
-#include <linux/lockdep.h>
-#include <linux/completion.h>
-#include <linux/debugobjects.h>
-#include <linux/bug.h>
-#include <linux/compiler.h>
-
-#ifdef CONFIG_RCU_TORTURE_TEST
-extern int rcutorture_runnable; /* for sysctl */
-#endif /* #ifdef CONFIG_RCU_TORTURE_TEST */
-
-#if defined(CONFIG_TREE_RCU) || defined(CONFIG_TREE_PREEMPT_RCU)
-extern void rcutorture_record_test_transition(void);
-extern void rcutorture_record_progress(unsigned long vernum);
-extern void do_trace_rcu_torture_read(char *rcutorturename,
-				      struct rcu_head *rhp);
-#else
-static inline void rcutorture_record_test_transition(void)
-{
-}
-static inline void rcutorture_record_progress(unsigned long vernum)
-{
-}
-#ifdef CONFIG_RCU_TRACE
-extern void do_trace_rcu_torture_read(char *rcutorturename,
-				      struct rcu_head *rhp);
-#else
-#define do_trace_rcu_torture_read(rcutorturename, rhp) do { } while (0)
-#endif
-#endif
-
-#define UINT_CMP_GE(a, b)	(UINT_MAX / 2 >= (a) - (b))
-#define UINT_CMP_LT(a, b)	(UINT_MAX / 2 < (a) - (b))
-#define ULONG_CMP_GE(a, b)	(ULONG_MAX / 2 >= (a) - (b))
-#define ULONG_CMP_LT(a, b)	(ULONG_MAX / 2 < (a) - (b))
-
-/* Exported common interfaces */
-
-#ifdef CONFIG_PREEMPT_RCU
-
-/**
- * call_rcu() - Queue an RCU callback for invocation after a grace period.
- * @head: structure to be used for queueing the RCU updates.
- * @func: actual callback function to be invoked after the grace period
- *
- * The callback function will be invoked some time after a full grace
- * period elapses, in other words after all pre-existing RCU read-side
- * critical sections have completed.  However, the callback function
- * might well execute concurrently with RCU read-side critical sections
- * that started after call_rcu() was invoked.  RCU read-side critical
- * sections are delimited by rcu_read_lock() and rcu_read_unlock(),
- * and may be nested.
- */
-extern void call_rcu(struct rcu_head *head,
-			      void (*func)(struct rcu_head *head));
-
-#else /* #ifdef CONFIG_PREEMPT_RCU */
-
-/* In classic RCU, call_rcu() is just call_rcu_sched(). */
-#define	call_rcu	call_rcu_sched
-
-#endif /* #else #ifdef CONFIG_PREEMPT_RCU */
-
-/**
- * call_rcu_bh() - Queue an RCU for invocation after a quicker grace period.
- * @head: structure to be used for queueing the RCU updates.
- * @func: actual callback function to be invoked after the grace period
- *
- * The callback function will be invoked some time after a full grace
- * period elapses, in other words after all currently executing RCU
- * read-side critical sections have completed. call_rcu_bh() assumes
- * that the read-side critical sections end on completion of a softirq
- * handler. This means that read-side critical sections in process
- * context must not be interrupted by softirqs. This interface is to be
- * used when most of the read-side critical sections are in softirq context.
- * RCU read-side critical sections are delimited by :
- *  - rcu_read_lock() and  rcu_read_unlock(), if in interrupt context.
- *  OR
- *  - rcu_read_lock_bh() and rcu_read_unlock_bh(), if in process context.
- *  These may be nested.
- */
-extern void call_rcu_bh(struct rcu_head *head,
-			void (*func)(struct rcu_head *head));
-
-/**
- * call_rcu_sched() - Queue an RCU for invocation after sched grace period.
- * @head: structure to be used for queueing the RCU updates.
- * @func: actual callback function to be invoked after the grace period
- *
- * The callback function will be invoked some time after a full grace
- * period elapses, in other words after all currently executing RCU
- * read-side critical sections have completed. call_rcu_sched() assumes
- * that the read-side critical sections end on enabling of preemption
- * or on voluntary preemption.
- * RCU read-side critical sections are delimited by :
- *  - rcu_read_lock_sched() and  rcu_read_unlock_sched(),
- *  OR
- *  anything that disables preemption.
- *  These may be nested.
- */
-extern void call_rcu_sched(struct rcu_head *head,
-			   void (*func)(struct rcu_head *rcu));
-
-extern void synchronize_sched(void);
-
-#ifdef CONFIG_PREEMPT_RCU
-
-extern void __rcu_read_lock(void);
-extern void __rcu_read_unlock(void);
-void synchronize_rcu(void);
-
-/*
- * Defined as a macro as it is a very low level header included from
- * areas that don't even know about current.  This gives the rcu_read_lock()
- * nesting depth, but makes sense only if CONFIG_PREEMPT_RCU -- in other
- * types of kernel builds, the rcu_read_lock() nesting depth is unknowable.
- */
-#define rcu_preempt_depth() (current->rcu_read_lock_nesting)
-
-#else /* #ifdef CONFIG_PREEMPT_RCU */
-
-static inline void __rcu_read_lock(void)
-{
-	preempt_disable();
-}
-
-static inline void __rcu_read_unlock(void)
-{
-	preempt_enable();
-}
-
-static inline void synchronize_rcu(void)
-{
-	synchronize_sched();
-}
-
-static inline int rcu_preempt_depth(void)
-{
-	return 0;
-}
-
-#endif /* #else #ifdef CONFIG_PREEMPT_RCU */
-
-/* Internal to kernel */
-extern void rcu_sched_qs(int cpu);
-extern void rcu_bh_qs(int cpu);
-extern void rcu_check_callbacks(int cpu, int user);
-struct notifier_block;
-extern void rcu_idle_enter(void);
-extern void rcu_idle_exit(void);
-extern void rcu_irq_enter(void);
-extern void rcu_irq_exit(void);
-
-/**
- * RCU_NONIDLE - Indicate idle-loop code that needs RCU readers
- * @a: Code that RCU needs to pay attention to.
- *
- * RCU, RCU-bh, and RCU-sched read-side critical sections are forbidden
- * in the inner idle loop, that is, between the rcu_idle_enter() and
- * the rcu_idle_exit() -- RCU will happily ignore any such read-side
- * critical sections.  However, things like powertop need tracepoints
- * in the inner idle loop.
- *
- * This macro provides the way out:  RCU_NONIDLE(do_something_with_RCU())
- * will tell RCU that it needs to pay attending, invoke its argument
- * (in this example, a call to the do_something_with_RCU() function),
- * and then tell RCU to go back to ignoring this CPU.  It is permissible
- * to nest RCU_NONIDLE() wrappers, but the nesting level is currently
- * quite limited.  If deeper nesting is required, it will be necessary
- * to adjust DYNTICK_TASK_NESTING_VALUE accordingly.
- *
- * This macro may be used from process-level code only.
- */
-#define RCU_NONIDLE(a) \
-	do { \
-		rcu_idle_exit(); \
-		do { a; } while (0); \
-		rcu_idle_enter(); \
-	} while (0)
-
-/*
- * Infrastructure to implement the synchronize_() primitives in
- * TREE_RCU and rcu_barrier_() primitives in TINY_RCU.
- */
-
-typedef void call_rcu_func_t(struct rcu_head *head,
-			     void (*func)(struct rcu_head *head));
-void wait_rcu_gp(call_rcu_func_t crf);
-
-#if defined(CONFIG_TREE_RCU) || defined(CONFIG_TREE_PREEMPT_RCU)
-#include <linux/rcutree.h>
-#elif defined(CONFIG_TINY_RCU) || defined(CONFIG_TINY_PREEMPT_RCU)
-#include <linux/rcutiny.h>
-#else
-#error "Unknown RCU implementation specified to kernel configuration"
-#endif
-
-/*
- * init_rcu_head_on_stack()/destroy_rcu_head_on_stack() are needed for dynamic
- * initialization and destruction of rcu_head on the stack. rcu_head structures
- * allocated dynamically in the heap or defined statically don't need any
- * initialization.
- */
-#ifdef CONFIG_DEBUG_OBJECTS_RCU_HEAD
-extern void init_rcu_head_on_stack(struct rcu_head *head);
-extern void destroy_rcu_head_on_stack(struct rcu_head *head);
-#else /* !CONFIG_DEBUG_OBJECTS_RCU_HEAD */
-static inline void init_rcu_head_on_stack(struct rcu_head *head)
-{
-}
-
-static inline void destroy_rcu_head_on_stack(struct rcu_head *head)
-{
-}
-#endif	/* #else !CONFIG_DEBUG_OBJECTS_RCU_HEAD */
-
-#if defined(CONFIG_HOTPLUG_CPU) && defined(CONFIG_PROVE_RCU)
-bool rcu_lockdep_current_cpu_online(void);
-#else /* #if defined(CONFIG_HOTPLUG_CPU) && defined(CONFIG_PROVE_RCU) */
-static inline bool rcu_lockdep_current_cpu_online(void)
-{
-	return 1;
-}
-#endif /* #else #if defined(CONFIG_HOTPLUG_CPU) && defined(CONFIG_PROVE_RCU) */
-
-#ifdef CONFIG_DEBUG_LOCK_ALLOC
-
-#ifdef CONFIG_PROVE_RCU
-extern int rcu_is_cpu_idle(void);
-#else /* !CONFIG_PROVE_RCU */
-static inline int rcu_is_cpu_idle(void)
-{
-	return 0;
-}
-#endif /* else !CONFIG_PROVE_RCU */
-
-static inline void rcu_lock_acquire(struct lockdep_map *map)
-{
-	lock_acquire(map, 0, 0, 2, 1, NULL, _THIS_IP_);
-}
-
-static inline void rcu_lock_release(struct lockdep_map *map)
-{
-	lock_release(map, 1, _THIS_IP_);
-}
-
-extern struct lockdep_map rcu_lock_map;
-extern struct lockdep_map rcu_bh_lock_map;
-extern struct lockdep_map rcu_sched_lock_map;
-extern int debug_lockdep_rcu_enabled(void);
-
-/**
- * rcu_read_lock_held() - might we be in RCU read-side critical section?
- *
- * If CONFIG_DEBUG_LOCK_ALLOC is selected, returns nonzero iff in an RCU
- * read-side critical section.  In absence of CONFIG_DEBUG_LOCK_ALLOC,
- * this assumes we are in an RCU read-side critical section unless it can
- * prove otherwise.  This is useful for debug checks in functions that
- * require that they be called within an RCU read-side critical section.
- *
- * Checks debug_lockdep_rcu_enabled() to prevent false positives during boot
- * and while lockdep is disabled.
- *
- * Note that rcu_read_lock() and the matching rcu_read_unlock() must
- * occur in the same context, for example, it is illegal to invoke
- * rcu_read_unlock() in process context if the matching rcu_read_lock()
- * was invoked from within an irq handler.
- *
- * Note that rcu_read_lock() is disallowed if the CPU is either idle or
- * offline from an RCU perspective, so check for those as well.
- */
-static inline int rcu_read_lock_held(void)
-{
-	if (!debug_lockdep_rcu_enabled())
-		return 1;
-	if (rcu_is_cpu_idle())
-		return 0;
-	if (!rcu_lockdep_current_cpu_online())
-		return 0;
-	return lock_is_held(&rcu_lock_map);
-}
-
-/*
- * rcu_read_lock_bh_held() is defined out of line to avoid #include-file
- * hell.
- */
-extern int rcu_read_lock_bh_held(void);
-
-/**
- * rcu_read_lock_sched_held() - might we be in RCU-sched read-side critical section?
- *
- * If CONFIG_DEBUG_LOCK_ALLOC is selected, returns nonzero iff in an
- * RCU-sched read-side critical section.  In absence of
- * CONFIG_DEBUG_LOCK_ALLOC, this assumes we are in an RCU-sched read-side
- * critical section unless it can prove otherwise.  Note that disabling
- * of preemption (including disabling irqs) counts as an RCU-sched
- * read-side critical section.  This is useful for debug checks in functions
- * that required that they be called within an RCU-sched read-side
- * critical section.
- *
- * Check debug_lockdep_rcu_enabled() to prevent false positives during boot
- * and while lockdep is disabled.
- *
- * Note that if the CPU is in the idle loop from an RCU point of
- * view (ie: that we are in the section between rcu_idle_enter() and
- * rcu_idle_exit()) then rcu_read_lock_held() returns false even if the CPU
- * did an rcu_read_lock().  The reason for this is that RCU ignores CPUs
- * that are in such a section, considering these as in extended quiescent
- * state, so such a CPU is effectively never in an RCU read-side critical
- * section regardless of what RCU primitives it invokes.  This state of
- * affairs is required --- we need to keep an RCU-free window in idle
- * where the CPU may possibly enter into low power mode. This way we can
- * notice an extended quiescent state to other CPUs that started a grace
- * period. Otherwise we would delay any grace period as long as we run in
- * the idle task.
- *
- * Similarly, we avoid claiming an SRCU read lock held if the current
- * CPU is offline.
- */
-#ifdef CONFIG_PREEMPT_COUNT
-static inline int rcu_read_lock_sched_held(void)
-{
-	int lockdep_opinion = 0;
-
-	if (!debug_lockdep_rcu_enabled())
-		return 1;
-	if (rcu_is_cpu_idle())
-		return 0;
-	if (!rcu_lockdep_current_cpu_online())
-		return 0;
-	if (debug_locks)
-		lockdep_opinion = lock_is_held(&rcu_sched_lock_map);
-	return lockdep_opinion || preempt_count() != 0 || irqs_disabled();
-}
-#else /* #ifdef CONFIG_PREEMPT_COUNT */
-static inline int rcu_read_lock_sched_held(void)
-{
-	return 1;
-}
-#endif /* #else #ifdef CONFIG_PREEMPT_COUNT */
-
-#else /* #ifdef CONFIG_DEBUG_LOCK_ALLOC */
-
-# define rcu_lock_acquire(a)		do { } while (0)
-# define rcu_lock_release(a)		do { } while (0)
-
-static inline int rcu_read_lock_held(void)
-{
-	return 1;
-}
-
-static inline int rcu_read_lock_bh_held(void)
-{
-	return 1;
-}
-
-#ifdef CONFIG_PREEMPT_COUNT
-static inline int rcu_read_lock_sched_held(void)
-{
-	return preempt_count() != 0 || irqs_disabled();
-}
-#else /* #ifdef CONFIG_PREEMPT_COUNT */
-static inline int rcu_read_lock_sched_held(void)
-{
-	return 1;
-}
-#endif /* #else #ifdef CONFIG_PREEMPT_COUNT */
-
-#endif /* #else #ifdef CONFIG_DEBUG_LOCK_ALLOC */
-
-#ifdef CONFIG_PROVE_RCU
-
-extern int rcu_my_thread_group_empty(void);
-
-/**
- * rcu_lockdep_assert - emit lockdep splat if specified condition not met
- * @c: condition to check
- * @s: informative message
- */
-#define rcu_lockdep_assert(c, s)					\
-	do {								\
-		static bool __section(.data.unlikely) __warned;		\
-		if (debug_lockdep_rcu_enabled() && !__warned && !(c)) {	\
-			__warned = true;				\
-			lockdep_rcu_suspicious(__FILE__, __LINE__, s);	\
-		}							\
-	} while (0)
-
-#if defined(CONFIG_PROVE_RCU) && !defined(CONFIG_PREEMPT_RCU)
-static inline void rcu_preempt_sleep_check(void)
-{
-	rcu_lockdep_assert(!lock_is_held(&rcu_lock_map),
-			   "Illegal context switch in RCU read-side "
-			   "critical section");
-}
-#else /* #ifdef CONFIG_PROVE_RCU */
-static inline void rcu_preempt_sleep_check(void)
-{
-}
-#endif /* #else #ifdef CONFIG_PROVE_RCU */
-
-#define rcu_sleep_check()						\
-	do {								\
-		rcu_preempt_sleep_check();				\
-		rcu_lockdep_assert(!lock_is_held(&rcu_bh_lock_map),	\
-				   "Illegal context switch in RCU-bh"	\
-				   " read-side critical section");	\
-		rcu_lockdep_assert(!lock_is_held(&rcu_sched_lock_map),	\
-				   "Illegal context switch in RCU-sched"\
-				   " read-side critical section");	\
-	} while (0)
-
-#else /* #ifdef CONFIG_PROVE_RCU */
-
-#define rcu_lockdep_assert(c, s) do { } while (0)
-#define rcu_sleep_check() do { } while (0)
-
-#endif /* #else #ifdef CONFIG_PROVE_RCU */
-
-/*
- * Helper functions for rcu_dereference_check(), rcu_dereference_protected()
- * and rcu_assign_pointer().  Some of these could be folded into their
- * callers, but they are left separate in order to ease introduction of
- * multiple flavors of pointers to match the multiple flavors of RCU
- * (e.g., __rcu_bh, * __rcu_sched, and __srcu), should this make sense in
- * the future.
- */
-
-#ifdef __CHECKER__
-#define rcu_dereference_sparse(p, space) \
-	((void)(((typeof(*p) space *)p) == p))
-#else /* #ifdef __CHECKER__ */
-#define rcu_dereference_sparse(p, space)
-#endif /* #else #ifdef __CHECKER__ */
-
-#define __rcu_access_pointer(p, space) \
-	({ \
-		typeof(*p) *_________p1 = (typeof(*p)*__force )ACCESS_ONCE(p); \
-		rcu_dereference_sparse(p, space); \
-		((typeof(*p) __force __kernel *)(_________p1)); \
-	})
-#define __rcu_dereference_check(p, c, space) \
-	({ \
-		typeof(*p) *_________p1 = (typeof(*p)*__force )ACCESS_ONCE(p); \
-		rcu_lockdep_assert(c, "suspicious rcu_dereference_check()" \
-				      " usage"); \
-		rcu_dereference_sparse(p, space); \
-		smp_read_barrier_depends(); \
-		((typeof(*p) __force __kernel *)(_________p1)); \
-	})
-#define __rcu_dereference_protected(p, c, space) \
-	({ \
-		rcu_lockdep_assert(c, "suspicious rcu_dereference_protected()" \
-				      " usage"); \
-		rcu_dereference_sparse(p, space); \
-		((typeof(*p) __force __kernel *)(p)); \
-	})
-
-#define __rcu_access_index(p, space) \
-	({ \
-		typeof(p) _________p1 = ACCESS_ONCE(p); \
-		rcu_dereference_sparse(p, space); \
-		(_________p1); \
-	})
-#define __rcu_dereference_index_check(p, c) \
-	({ \
-		typeof(p) _________p1 = ACCESS_ONCE(p); \
-		rcu_lockdep_assert(c, \
-				   "suspicious rcu_dereference_index_check()" \
-				   " usage"); \
-		smp_read_barrier_depends(); \
-		(_________p1); \
-	})
-#define __rcu_assign_pointer(p, v, space) \
-	({ \
-		smp_wmb(); \
-		(p) = (typeof(*v) __force space *)(v); \
-	})
-
-
-/**
- * rcu_access_pointer() - fetch RCU pointer with no dereferencing
- * @p: The pointer to read
- *
- * Return the value of the specified RCU-protected pointer, but omit the
- * smp_read_barrier_depends() and keep the ACCESS_ONCE().  This is useful
- * when the value of this pointer is accessed, but the pointer is not
- * dereferenced, for example, when testing an RCU-protected pointer against
- * NULL.  Although rcu_access_pointer() may also be used in cases where
- * update-side locks prevent the value of the pointer from changing, you
- * should instead use rcu_dereference_protected() for this use case.
- *
- * It is also permissible to use rcu_access_pointer() when read-side
- * access to the pointer was removed at least one grace period ago, as
- * is the case in the context of the RCU callback that is freeing up
- * the data, or after a synchronize_rcu() returns.  This can be useful
- * when tearing down multi-linked structures after a grace period
- * has elapsed.
- */
-#define rcu_access_pointer(p) __rcu_access_pointer((p), __rcu)
-
-/**
- * rcu_dereference_check() - rcu_dereference with debug checking
- * @p: The pointer to read, prior to dereferencing
- * @c: The conditions under which the dereference will take place
- *
- * Do an rcu_dereference(), but check that the conditions under which the
- * dereference will take place are correct.  Typically the conditions
- * indicate the various locking conditions that should be held at that
- * point.  The check should return true if the conditions are satisfied.
- * An implicit check for being in an RCU read-side critical section
- * (rcu_read_lock()) is included.
- *
- * For example:
- *
- *	bar = rcu_dereference_check(foo->bar, lockdep_is_held(&foo->lock));
- *
- * could be used to indicate to lockdep that foo->bar may only be dereferenced
- * if either rcu_read_lock() is held, or that the lock required to replace
- * the bar struct at foo->bar is held.
- *
- * Note that the list of conditions may also include indications of when a lock
- * need not be held, for example during initialisation or destruction of the
- * target struct:
- *
- *	bar = rcu_dereference_check(foo->bar, lockdep_is_held(&foo->lock) ||
- *					      atomic_read(&foo->usage) == 0);
- *
- * Inserts memory barriers on architectures that require them
- * (currently only the Alpha), prevents the compiler from refetching
- * (and from merging fetches), and, more importantly, documents exactly
- * which pointers are protected by RCU and checks that the pointer is
- * annotated as __rcu.
- */
-#define rcu_dereference_check(p, c) \
-	__rcu_dereference_check((p), rcu_read_lock_held() || (c), __rcu)
-
-/**
- * rcu_dereference_bh_check() - rcu_dereference_bh with debug checking
- * @p: The pointer to read, prior to dereferencing
- * @c: The conditions under which the dereference will take place
- *
- * This is the RCU-bh counterpart to rcu_dereference_check().
- */
-#define rcu_dereference_bh_check(p, c) \
-	__rcu_dereference_check((p), rcu_read_lock_bh_held() || (c), __rcu)
-
-/**
- * rcu_dereference_sched_check() - rcu_dereference_sched with debug checking
- * @p: The pointer to read, prior to dereferencing
- * @c: The conditions under which the dereference will take place
- *
- * This is the RCU-sched counterpart to rcu_dereference_check().
- */
-#define rcu_dereference_sched_check(p, c) \
-	__rcu_dereference_check((p), rcu_read_lock_sched_held() || (c), \
-				__rcu)
-
-#define rcu_dereference_raw(p) rcu_dereference_check(p, 1) /*@@@ needed? @@@*/
-
-/**
- * rcu_access_index() - fetch RCU index with no dereferencing
- * @p: The index to read
- *
- * Return the value of the specified RCU-protected index, but omit the
- * smp_read_barrier_depends() and keep the ACCESS_ONCE().  This is useful
- * when the value of this index is accessed, but the index is not
- * dereferenced, for example, when testing an RCU-protected index against
- * -1.  Although rcu_access_index() may also be used in cases where
- * update-side locks prevent the value of the index from changing, you
- * should instead use rcu_dereference_index_protected() for this use case.
- */
-#define rcu_access_index(p) __rcu_access_index((p), __rcu)
-
-/**
- * rcu_dereference_index_check() - rcu_dereference for indices with debug checking
- * @p: The pointer to read, prior to dereferencing
- * @c: The conditions under which the dereference will take place
- *
- * Similar to rcu_dereference_check(), but omits the sparse checking.
- * This allows rcu_dereference_index_check() to be used on integers,
- * which can then be used as array indices.  Attempting to use
- * rcu_dereference_check() on an integer will give compiler warnings
- * because the sparse address-space mechanism relies on dereferencing
- * the RCU-protected pointer.  Dereferencing integers is not something
- * that even gcc will put up with.
- *
- * Note that this function does not implicitly check for RCU read-side
- * critical sections.  If this function gains lots of uses, it might
- * make sense to provide versions for each flavor of RCU, but it does
- * not make sense as of early 2010.
- */
-#define rcu_dereference_index_check(p, c) \
-	__rcu_dereference_index_check((p), (c))
-
-/**
- * rcu_dereference_protected() - fetch RCU pointer when updates prevented
- * @p: The pointer to read, prior to dereferencing
- * @c: The conditions under which the dereference will take place
- *
- * Return the value of the specified RCU-protected pointer, but omit
- * both the smp_read_barrier_depends() and the ACCESS_ONCE().  This
- * is useful in cases where update-side locks prevent the value of the
- * pointer from changing.  Please note that this primitive does -not-
- * prevent the compiler from repeating this reference or combining it
- * with other references, so it should not be used without protection
- * of appropriate locks.
- *
- * This function is only for update-side use.  Using this function
- * when protected only by rcu_read_lock() will result in infrequent
- * but very ugly failures.
- */
-#define rcu_dereference_protected(p, c) \
-	__rcu_dereference_protected((p), (c), __rcu)
-
-
-/**
- * rcu_dereference() - fetch RCU-protected pointer for dereferencing
- * @p: The pointer to read, prior to dereferencing
- *
- * This is a simple wrapper around rcu_dereference_check().
- */
-#define rcu_dereference(p) rcu_dereference_check(p, 0)
-
-/**
- * rcu_dereference_bh() - fetch an RCU-bh-protected pointer for dereferencing
- * @p: The pointer to read, prior to dereferencing
- *
- * Makes rcu_dereference_check() do the dirty work.
- */
-#define rcu_dereference_bh(p) rcu_dereference_bh_check(p, 0)
-
-/**
- * rcu_dereference_sched() - fetch RCU-sched-protected pointer for dereferencing
- * @p: The pointer to read, prior to dereferencing
- *
- * Makes rcu_dereference_check() do the dirty work.
- */
-#define rcu_dereference_sched(p) rcu_dereference_sched_check(p, 0)
-
-/**
- * rcu_read_lock() - mark the beginning of an RCU read-side critical section
- *
- * When synchronize_rcu() is invoked on one CPU while other CPUs
- * are within RCU read-side critical sections, then the
- * synchronize_rcu() is guaranteed to block until after all the other
- * CPUs exit their critical sections.  Similarly, if call_rcu() is invoked
- * on one CPU while other CPUs are within RCU read-side critical
- * sections, invocation of the corresponding RCU callback is deferred
- * until after the all the other CPUs exit their critical sections.
- *
- * Note, however, that RCU callbacks are permitted to run concurrently
- * with new RCU read-side critical sections.  One way that this can happen
- * is via the following sequence of events: (1) CPU 0 enters an RCU
- * read-side critical section, (2) CPU 1 invokes call_rcu() to register
- * an RCU callback, (3) CPU 0 exits the RCU read-side critical section,
- * (4) CPU 2 enters a RCU read-side critical section, (5) the RCU
- * callback is invoked.  This is legal, because the RCU read-side critical
- * section that was running concurrently with the call_rcu() (and which
- * therefore might be referencing something that the corresponding RCU
- * callback would free up) has completed before the corresponding
- * RCU callback is invoked.
- *
- * RCU read-side critical sections may be nested.  Any deferred actions
- * will be deferred until the outermost RCU read-side critical section
- * completes.
- *
- * You can avoid reading and understanding the next paragraph by
- * following this rule: don't put anything in an rcu_read_lock() RCU
- * read-side critical section that would block in a !PREEMPT kernel.
- * But if you want the full story, read on!
- *
- * In non-preemptible RCU implementations (TREE_RCU and TINY_RCU), it
- * is illegal to block while in an RCU read-side critical section.  In
- * preemptible RCU implementations (TREE_PREEMPT_RCU and TINY_PREEMPT_RCU)
- * in CONFIG_PREEMPT kernel builds, RCU read-side critical sections may
- * be preempted, but explicit blocking is illegal.  Finally, in preemptible
- * RCU implementations in real-time (CONFIG_PREEMPT_RT) kernel builds,
- * RCU read-side critical sections may be preempted and they may also
- * block, but only when acquiring spinlocks that are subject to priority
- * inheritance.
- */
-static inline void rcu_read_lock(void)
-{
-	__rcu_read_lock();
-	__acquire(RCU);
-	rcu_lock_acquire(&rcu_lock_map);
-	rcu_lockdep_assert(!rcu_is_cpu_idle(),
-			   "rcu_read_lock() used illegally while idle");
-}
-
-/*
- * So where is rcu_write_lock()?  It does not exist, as there is no
- * way for writers to lock out RCU readers.  This is a feature, not
- * a bug -- this property is what provides RCU's performance benefits.
- * Of course, writers must coordinate with each other.  The normal
- * spinlock primitives work well for this, but any other technique may be
- * used as well.  RCU does not care how the writers keep out of each
- * others' way, as long as they do so.
- */
-
-/**
- * rcu_read_unlock() - marks the end of an RCU read-side critical section.
- *
- * See rcu_read_lock() for more information.
- */
-static inline void rcu_read_unlock(void)
-{
-	rcu_lockdep_assert(!rcu_is_cpu_idle(),
-			   "rcu_read_unlock() used illegally while idle");
-	rcu_lock_release(&rcu_lock_map);
-	__release(RCU);
-	__rcu_read_unlock();
-}
-
-/**
- * rcu_read_lock_bh() - mark the beginning of an RCU-bh critical section
- *
- * This is equivalent of rcu_read_lock(), but to be used when updates
- * are being done using call_rcu_bh() or synchronize_rcu_bh(). Since
- * both call_rcu_bh() and synchronize_rcu_bh() consider completion of a
- * softirq handler to be a quiescent state, a process in RCU read-side
- * critical section must be protected by disabling softirqs. Read-side
- * critical sections in interrupt context can use just rcu_read_lock(),
- * though this should at least be commented to avoid confusing people
- * reading the code.
- *
- * Note that rcu_read_lock_bh() and the matching rcu_read_unlock_bh()
- * must occur in the same context, for example, it is illegal to invoke
- * rcu_read_unlock_bh() from one task if the matching rcu_read_lock_bh()
- * was invoked from some other task.
- */
-static inline void rcu_read_lock_bh(void)
-{
-	local_bh_disable();
-	__acquire(RCU_BH);
-	rcu_lock_acquire(&rcu_bh_lock_map);
-	rcu_lockdep_assert(!rcu_is_cpu_idle(),
-			   "rcu_read_lock_bh() used illegally while idle");
-}
-
-/*
- * rcu_read_unlock_bh - marks the end of a softirq-only RCU critical section
- *
- * See rcu_read_lock_bh() for more information.
- */
-static inline void rcu_read_unlock_bh(void)
-{
-	rcu_lockdep_assert(!rcu_is_cpu_idle(),
-			   "rcu_read_unlock_bh() used illegally while idle");
-	rcu_lock_release(&rcu_bh_lock_map);
-	__release(RCU_BH);
-	local_bh_enable();
-}
-
-/**
- * rcu_read_lock_sched() - mark the beginning of a RCU-sched critical section
- *
- * This is equivalent of rcu_read_lock(), but to be used when updates
- * are being done using call_rcu_sched() or synchronize_rcu_sched().
- * Read-side critical sections can also be introduced by anything that
- * disables preemption, including local_irq_disable() and friends.
- *
- * Note that rcu_read_lock_sched() and the matching rcu_read_unlock_sched()
- * must occur in the same context, for example, it is illegal to invoke
- * rcu_read_unlock_sched() from process context if the matching
- * rcu_read_lock_sched() was invoked from an NMI handler.
- */
-static inline void rcu_read_lock_sched(void)
-{
-	preempt_disable();
-	__acquire(RCU_SCHED);
-	rcu_lock_acquire(&rcu_sched_lock_map);
-	rcu_lockdep_assert(!rcu_is_cpu_idle(),
-			   "rcu_read_lock_sched() used illegally while idle");
-}
-
-/* Used by lockdep and tracing: cannot be traced, cannot call lockdep. */
-static inline notrace void rcu_read_lock_sched_notrace(void)
-{
-	preempt_disable_notrace();
-	__acquire(RCU_SCHED);
-}
-
-/*
- * rcu_read_unlock_sched - marks the end of a RCU-classic critical section
- *
- * See rcu_read_lock_sched for more information.
- */
-static inline void rcu_read_unlock_sched(void)
-{
-	rcu_lockdep_assert(!rcu_is_cpu_idle(),
-			   "rcu_read_unlock_sched() used illegally while idle");
-	rcu_lock_release(&rcu_sched_lock_map);
-	__release(RCU_SCHED);
-	preempt_enable();
-}
-
-/* Used by lockdep and tracing: cannot be traced, cannot call lockdep. */
-static inline notrace void rcu_read_unlock_sched_notrace(void)
-{
-	__release(RCU_SCHED);
-	preempt_enable_notrace();
-}
-
-/**
- * rcu_assign_pointer() - assign to RCU-protected pointer
- * @p: pointer to assign to
- * @v: value to assign (publish)
- *
- * Assigns the specified value to the specified RCU-protected
- * pointer, ensuring that any concurrent RCU readers will see
- * any prior initialization.  Returns the value assigned.
- *
- * Inserts memory barriers on architectures that require them
- * (which is most of them), and also prevents the compiler from
- * reordering the code that initializes the structure after the pointer
- * assignment.  More importantly, this call documents which pointers
- * will be dereferenced by RCU read-side code.
- *
- * In some special cases, you may use RCU_INIT_POINTER() instead
- * of rcu_assign_pointer().  RCU_INIT_POINTER() is a bit faster due
- * to the fact that it does not constrain either the CPU or the compiler.
- * That said, using RCU_INIT_POINTER() when you should have used
- * rcu_assign_pointer() is a very bad thing that results in
- * impossible-to-diagnose memory corruption.  So please be careful.
- * See the RCU_INIT_POINTER() comment header for details.
- */
-#define rcu_assign_pointer(p, v) \
-	__rcu_assign_pointer((p), (v), __rcu)
-
-/**
- * RCU_INIT_POINTER() - initialize an RCU protected pointer
- *
- * Initialize an RCU-protected pointer in special cases where readers
- * do not need ordering constraints on the CPU or the compiler.  These
- * special cases are:
- *
- * 1.	This use of RCU_INIT_POINTER() is NULLing out the pointer -or-
- * 2.	The caller has taken whatever steps are required to prevent
- *	RCU readers from concurrently accessing this pointer -or-
- * 3.	The referenced data structure has already been exposed to
- *	readers either at compile time or via rcu_assign_pointer() -and-
- *	a.	You have not made -any- reader-visible changes to
- *		this structure since then -or-
- *	b.	It is OK for readers accessing this structure from its
- *		new location to see the old state of the structure.  (For
- *		example, the changes were to statistical counters or to
- *		other state where exact synchronization is not required.)
- *
- * Failure to follow these rules governing use of RCU_INIT_POINTER() will
- * result in impossible-to-diagnose memory corruption.  As in the structures
- * will look OK in crash dumps, but any concurrent RCU readers might
- * see pre-initialized values of the referenced data structure.  So
- * please be very careful how you use RCU_INIT_POINTER()!!!
- *
- * If you are creating an RCU-protected linked structure that is accessed
- * by a single external-to-structure RCU-protected pointer, then you may
- * use RCU_INIT_POINTER() to initialize the internal RCU-protected
- * pointers, but you must use rcu_assign_pointer() to initialize the
- * external-to-structure pointer -after- you have completely initialized
- * the reader-accessible portions of the linked structure.
- */
-#define RCU_INIT_POINTER(p, v) \
-		p = (typeof(*v) __force __rcu *)(v)
-
-static __always_inline bool __is_kfree_rcu_offset(unsigned long offset)
-{
-	return offset < 4096;
-}
-
-static __always_inline
-void __kfree_rcu(struct rcu_head *head, unsigned long offset)
-{
-	typedef void (*rcu_callback)(struct rcu_head *);
-
-	BUILD_BUG_ON(!__builtin_constant_p(offset));
-
-	/* See the kfree_rcu() header comment. */
-	BUILD_BUG_ON(!__is_kfree_rcu_offset(offset));
-
-	kfree_call_rcu(head, (rcu_callback)offset);
-}
-
-/**
- * kfree_rcu() - kfree an object after a grace period.
- * @ptr:	pointer to kfree
- * @rcu_head:	the name of the struct rcu_head within the type of @ptr.
- *
- * Many rcu callbacks functions just call kfree() on the base structure.
- * These functions are trivial, but their size adds up, and furthermore
- * when they are used in a kernel module, that module must invoke the
- * high-latency rcu_barrier() function at module-unload time.
- *
- * The kfree_rcu() function handles this issue.  Rather than encoding a
- * function address in the embedded rcu_head structure, kfree_rcu() instead
- * encodes the offset of the rcu_head structure within the base structure.
- * Because the functions are not allowed in the low-order 4096 bytes of
- * kernel virtual memory, offsets up to 4095 bytes can be accommodated.
- * If the offset is larger than 4095 bytes, a compile-time error will
- * be generated in __kfree_rcu().  If this error is triggered, you can
- * either fall back to use of call_rcu() or rearrange the structure to
- * position the rcu_head structure into the first 4096 bytes.
- *
- * Note that the allowable offset might decrease in the future, for example,
- * to allow something like kmem_cache_free_rcu().
- */
-#define kfree_rcu(ptr, rcu_head)					\
-	__kfree_rcu(&((ptr)->rcu_head), offsetof(typeof(*(ptr)), rcu_head))
-
-#endif /* __LINUX_RCUPDATE_H */
diff --git a/ANDROID_3.4.5/include/linux/rcutiny.h b/ANDROID_3.4.5/include/linux/rcutiny.h
deleted file mode 100644
index e93df771..00000000
--- a/ANDROID_3.4.5/include/linux/rcutiny.h
+++ /dev/null
@@ -1,171 +0,0 @@
-/*
- * Read-Copy Update mechanism for mutual exclusion, the Bloatwatch edition.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- *
- * Copyright IBM Corporation, 2008
- *
- * Author: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
- *
- * For detailed explanation of Read-Copy Update mechanism see -
- *		Documentation/RCU
- */
-#ifndef __LINUX_TINY_H
-#define __LINUX_TINY_H
-
-#include <linux/cache.h>
-
-static inline void rcu_init(void)
-{
-}
-
-static inline void rcu_barrier_bh(void)
-{
-	wait_rcu_gp(call_rcu_bh);
-}
-
-static inline void rcu_barrier_sched(void)
-{
-	wait_rcu_gp(call_rcu_sched);
-}
-
-#ifdef CONFIG_TINY_RCU
-
-static inline void synchronize_rcu_expedited(void)
-{
-	synchronize_sched();	/* Only one CPU, so pretty fast anyway!!! */
-}
-
-static inline void rcu_barrier(void)
-{
-	rcu_barrier_sched();  /* Only one CPU, so only one list of callbacks! */
-}
-
-#else /* #ifdef CONFIG_TINY_RCU */
-
-void synchronize_rcu_expedited(void);
-
-static inline void rcu_barrier(void)
-{
-	wait_rcu_gp(call_rcu);
-}
-
-#endif /* #else #ifdef CONFIG_TINY_RCU */
-
-static inline void synchronize_rcu_bh(void)
-{
-	synchronize_sched();
-}
-
-static inline void synchronize_rcu_bh_expedited(void)
-{
-	synchronize_sched();
-}
-
-static inline void synchronize_sched_expedited(void)
-{
-	synchronize_sched();
-}
-
-static inline void kfree_call_rcu(struct rcu_head *head,
-				  void (*func)(struct rcu_head *rcu))
-{
-	call_rcu(head, func);
-}
-
-#ifdef CONFIG_TINY_RCU
-
-static inline void rcu_preempt_note_context_switch(void)
-{
-}
-
-static inline void exit_rcu(void)
-{
-}
-
-static inline int rcu_needs_cpu(int cpu)
-{
-	return 0;
-}
-
-#else /* #ifdef CONFIG_TINY_RCU */
-
-void rcu_preempt_note_context_switch(void);
-extern void exit_rcu(void);
-int rcu_preempt_needs_cpu(void);
-
-static inline int rcu_needs_cpu(int cpu)
-{
-	return rcu_preempt_needs_cpu();
-}
-
-#endif /* #else #ifdef CONFIG_TINY_RCU */
-
-static inline void rcu_note_context_switch(int cpu)
-{
-	rcu_sched_qs(cpu);
-	rcu_preempt_note_context_switch();
-}
-
-/*
- * Take advantage of the fact that there is only one CPU, which
- * allows us to ignore virtualization-based context switches.
- */
-static inline void rcu_virt_note_context_switch(int cpu)
-{
-}
-
-/*
- * Return the number of grace periods.
- */
-static inline long rcu_batches_completed(void)
-{
-	return 0;
-}
-
-/*
- * Return the number of bottom-half grace periods.
- */
-static inline long rcu_batches_completed_bh(void)
-{
-	return 0;
-}
-
-static inline void rcu_force_quiescent_state(void)
-{
-}
-
-static inline void rcu_bh_force_quiescent_state(void)
-{
-}
-
-static inline void rcu_sched_force_quiescent_state(void)
-{
-}
-
-static inline void rcu_cpu_stall_reset(void)
-{
-}
-
-#ifdef CONFIG_DEBUG_LOCK_ALLOC
-extern int rcu_scheduler_active __read_mostly;
-extern void rcu_scheduler_starting(void);
-#else /* #ifdef CONFIG_DEBUG_LOCK_ALLOC */
-static inline void rcu_scheduler_starting(void)
-{
-}
-#endif /* #else #ifdef CONFIG_DEBUG_LOCK_ALLOC */
-
-#endif /* __LINUX_RCUTINY_H */
diff --git a/ANDROID_3.4.5/include/linux/rcutree.h b/ANDROID_3.4.5/include/linux/rcutree.h
deleted file mode 100644
index e8ee5dd0..00000000
--- a/ANDROID_3.4.5/include/linux/rcutree.h
+++ /dev/null
@@ -1,111 +0,0 @@
-/*
- * Read-Copy Update mechanism for mutual exclusion (tree-based version)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- *
- * Copyright IBM Corporation, 2008
- *
- * Author: Dipankar Sarma <dipankar@in.ibm.com>
- *	   Paul E. McKenney <paulmck@linux.vnet.ibm.com> Hierarchical algorithm
- *
- * Based on the original work by Paul McKenney <paulmck@us.ibm.com>
- * and inputs from Rusty Russell, Andrea Arcangeli and Andi Kleen.
- *
- * For detailed explanation of Read-Copy Update mechanism see -
- *	Documentation/RCU
- */
-
-#ifndef __LINUX_RCUTREE_H
-#define __LINUX_RCUTREE_H
-
-extern void rcu_init(void);
-extern void rcu_note_context_switch(int cpu);
-extern int rcu_needs_cpu(int cpu);
-extern void rcu_cpu_stall_reset(void);
-
-/*
- * Note a virtualization-based context switch.  This is simply a
- * wrapper around rcu_note_context_switch(), which allows TINY_RCU
- * to save a few bytes.
- */
-static inline void rcu_virt_note_context_switch(int cpu)
-{
-	rcu_note_context_switch(cpu);
-}
-
-#ifdef CONFIG_TREE_PREEMPT_RCU
-
-extern void exit_rcu(void);
-
-#else /* #ifdef CONFIG_TREE_PREEMPT_RCU */
-
-static inline void exit_rcu(void)
-{
-}
-
-#endif /* #else #ifdef CONFIG_TREE_PREEMPT_RCU */
-
-extern void synchronize_rcu_bh(void);
-extern void synchronize_sched_expedited(void);
-extern void synchronize_rcu_expedited(void);
-
-void kfree_call_rcu(struct rcu_head *head, void (*func)(struct rcu_head *rcu));
-
-/**
- * synchronize_rcu_bh_expedited - Brute-force RCU-bh grace period
- *
- * Wait for an RCU-bh grace period to elapse, but use a "big hammer"
- * approach to force the grace period to end quickly.  This consumes
- * significant time on all CPUs and is unfriendly to real-time workloads,
- * so is thus not recommended for any sort of common-case code.  In fact,
- * if you are using synchronize_rcu_bh_expedited() in a loop, please
- * restructure your code to batch your updates, and then use a single
- * synchronize_rcu_bh() instead.
- *
- * Note that it is illegal to call this function while holding any lock
- * that is acquired by a CPU-hotplug notifier.  And yes, it is also illegal
- * to call this function from a CPU-hotplug notifier.  Failing to observe
- * these restriction will result in deadlock.
- */
-static inline void synchronize_rcu_bh_expedited(void)
-{
-	synchronize_sched_expedited();
-}
-
-extern void rcu_barrier(void);
-extern void rcu_barrier_bh(void);
-extern void rcu_barrier_sched(void);
-
-extern unsigned long rcutorture_testseq;
-extern unsigned long rcutorture_vernum;
-extern long rcu_batches_completed(void);
-extern long rcu_batches_completed_bh(void);
-extern long rcu_batches_completed_sched(void);
-
-extern void rcu_force_quiescent_state(void);
-extern void rcu_bh_force_quiescent_state(void);
-extern void rcu_sched_force_quiescent_state(void);
-
-/* A context switch is a grace period for RCU-sched and RCU-bh. */
-static inline int rcu_blocking_is_gp(void)
-{
-	might_sleep();  /* Check for RCU read-side critical section. */
-	return num_online_cpus() == 1;
-}
-
-extern void rcu_scheduler_starting(void);
-extern int rcu_scheduler_active __read_mostly;
-
-#endif /* __LINUX_RCUTREE_H */
diff --git a/ANDROID_3.4.5/include/linux/rds.h b/ANDROID_3.4.5/include/linux/rds.h
deleted file mode 100644
index 91950950..00000000
--- a/ANDROID_3.4.5/include/linux/rds.h
+++ /dev/null
@@ -1,285 +0,0 @@
-/*
- * Copyright (c) 2008 Oracle.  All rights reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses.  You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the
- * OpenIB.org BSD license below:
- *
- *     Redistribution and use in source and binary forms, with or
- *     without modification, are permitted provided that the following
- *     conditions are met:
- *
- *      - Redistributions of source code must retain the above
- *        copyright notice, this list of conditions and the following
- *        disclaimer.
- *
- *      - Redistributions in binary form must reproduce the above
- *        copyright notice, this list of conditions and the following
- *        disclaimer in the documentation and/or other materials
- *        provided with the distribution.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
- * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
- * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
- *
- */
-
-#ifndef _LINUX_RDS_H
-#define _LINUX_RDS_H
-
-#include <linux/types.h>
-
-#define RDS_IB_ABI_VERSION		0x301
-
-/*
- * setsockopt/getsockopt for SOL_RDS
- */
-#define RDS_CANCEL_SENT_TO      	1
-#define RDS_GET_MR			2
-#define RDS_FREE_MR			3
-/* deprecated: RDS_BARRIER 4 */
-#define RDS_RECVERR			5
-#define RDS_CONG_MONITOR		6
-#define RDS_GET_MR_FOR_DEST		7
-
-/*
- * Control message types for SOL_RDS.
- *
- * CMSG_RDMA_ARGS (sendmsg)
- *	Request a RDMA transfer to/from the specified
- *	memory ranges.
- *	The cmsg_data is a struct rds_rdma_args.
- * RDS_CMSG_RDMA_DEST (recvmsg, sendmsg)
- *	Kernel informs application about intended
- *	source/destination of a RDMA transfer
- * RDS_CMSG_RDMA_MAP (sendmsg)
- *	Application asks kernel to map the given
- *	memory range into a IB MR, and send the
- *	R_Key along in an RDS extension header.
- *	The cmsg_data is a struct rds_get_mr_args,
- *	the same as for the GET_MR setsockopt.
- * RDS_CMSG_RDMA_STATUS (recvmsg)
- *	Returns the status of a completed RDMA operation.
- */
-#define RDS_CMSG_RDMA_ARGS		1
-#define RDS_CMSG_RDMA_DEST		2
-#define RDS_CMSG_RDMA_MAP		3
-#define RDS_CMSG_RDMA_STATUS		4
-#define RDS_CMSG_CONG_UPDATE		5
-#define RDS_CMSG_ATOMIC_FADD		6
-#define RDS_CMSG_ATOMIC_CSWP		7
-#define RDS_CMSG_MASKED_ATOMIC_FADD	8
-#define RDS_CMSG_MASKED_ATOMIC_CSWP	9
-
-#define RDS_INFO_FIRST			10000
-#define RDS_INFO_COUNTERS		10000
-#define RDS_INFO_CONNECTIONS		10001
-/* 10002 aka RDS_INFO_FLOWS is deprecated */
-#define RDS_INFO_SEND_MESSAGES		10003
-#define RDS_INFO_RETRANS_MESSAGES       10004
-#define RDS_INFO_RECV_MESSAGES          10005
-#define RDS_INFO_SOCKETS                10006
-#define RDS_INFO_TCP_SOCKETS            10007
-#define RDS_INFO_IB_CONNECTIONS		10008
-#define RDS_INFO_CONNECTION_STATS	10009
-#define RDS_INFO_IWARP_CONNECTIONS	10010
-#define RDS_INFO_LAST			10010
-
-struct rds_info_counter {
-	uint8_t	name[32];
-	uint64_t	value;
-} __attribute__((packed));
-
-#define RDS_INFO_CONNECTION_FLAG_SENDING	0x01
-#define RDS_INFO_CONNECTION_FLAG_CONNECTING	0x02
-#define RDS_INFO_CONNECTION_FLAG_CONNECTED	0x04
-
-#define TRANSNAMSIZ	16
-
-struct rds_info_connection {
-	uint64_t	next_tx_seq;
-	uint64_t	next_rx_seq;
-	__be32		laddr;
-	__be32		faddr;
-	uint8_t	transport[TRANSNAMSIZ];		/* null term ascii */
-	uint8_t	flags;
-} __attribute__((packed));
-
-#define RDS_INFO_MESSAGE_FLAG_ACK               0x01
-#define RDS_INFO_MESSAGE_FLAG_FAST_ACK          0x02
-
-struct rds_info_message {
-	uint64_t	seq;
-	uint32_t	len;
-	__be32		laddr;
-	__be32		faddr;
-	__be16		lport;
-	__be16		fport;
-	uint8_t	flags;
-} __attribute__((packed));
-
-struct rds_info_socket {
-	uint32_t	sndbuf;
-	__be32		bound_addr;
-	__be32		connected_addr;
-	__be16		bound_port;
-	__be16		connected_port;
-	uint32_t	rcvbuf;
-	uint64_t	inum;
-} __attribute__((packed));
-
-struct rds_info_tcp_socket {
-	__be32          local_addr;
-	__be16          local_port;
-	__be32          peer_addr;
-	__be16          peer_port;
-	uint64_t       hdr_rem;
-	uint64_t       data_rem;
-	uint32_t       last_sent_nxt;
-	uint32_t       last_expected_una;
-	uint32_t       last_seen_una;
-} __attribute__((packed));
-
-#define RDS_IB_GID_LEN	16
-struct rds_info_rdma_connection {
-	__be32		src_addr;
-	__be32		dst_addr;
-	uint8_t		src_gid[RDS_IB_GID_LEN];
-	uint8_t		dst_gid[RDS_IB_GID_LEN];
-
-	uint32_t	max_send_wr;
-	uint32_t	max_recv_wr;
-	uint32_t	max_send_sge;
-	uint32_t	rdma_mr_max;
-	uint32_t	rdma_mr_size;
-};
-
-/*
- * Congestion monitoring.
- * Congestion control in RDS happens at the host connection
- * level by exchanging a bitmap marking congested ports.
- * By default, a process sleeping in poll() is always woken
- * up when the congestion map is updated.
- * With explicit monitoring, an application can have more
- * fine-grained control.
- * The application installs a 64bit mask value in the socket,
- * where each bit corresponds to a group of ports.
- * When a congestion update arrives, RDS checks the set of
- * ports that are now uncongested against the list bit mask
- * installed in the socket, and if they overlap, we queue a
- * cong_notification on the socket.
- *
- * To install the congestion monitor bitmask, use RDS_CONG_MONITOR
- * with the 64bit mask.
- * Congestion updates are received via RDS_CMSG_CONG_UPDATE
- * control messages.
- *
- * The correspondence between bits and ports is
- *	1 << (portnum % 64)
- */
-#define RDS_CONG_MONITOR_SIZE	64
-#define RDS_CONG_MONITOR_BIT(port)  (((unsigned int) port) % RDS_CONG_MONITOR_SIZE)
-#define RDS_CONG_MONITOR_MASK(port) (1ULL << RDS_CONG_MONITOR_BIT(port))
-
-/*
- * RDMA related types
- */
-
-/*
- * This encapsulates a remote memory location.
- * In the current implementation, it contains the R_Key
- * of the remote memory region, and the offset into it
- * (so that the application does not have to worry about
- * alignment).
- */
-typedef uint64_t	rds_rdma_cookie_t;
-
-struct rds_iovec {
-	uint64_t	addr;
-	uint64_t	bytes;
-};
-
-struct rds_get_mr_args {
-	struct rds_iovec vec;
-	uint64_t	cookie_addr;
-	uint64_t	flags;
-};
-
-struct rds_get_mr_for_dest_args {
-	struct sockaddr_storage	dest_addr;
-	struct rds_iovec 	vec;
-	uint64_t		cookie_addr;
-	uint64_t		flags;
-};
-
-struct rds_free_mr_args {
-	rds_rdma_cookie_t cookie;
-	uint64_t	flags;
-};
-
-struct rds_rdma_args {
-	rds_rdma_cookie_t cookie;
-	struct rds_iovec remote_vec;
-	uint64_t	local_vec_addr;
-	uint64_t	nr_local;
-	uint64_t	flags;
-	uint64_t	user_token;
-};
-
-struct rds_atomic_args {
-	rds_rdma_cookie_t cookie;
-	uint64_t 	local_addr;
-	uint64_t 	remote_addr;
-	union {
-		struct {
-			uint64_t	compare;
-			uint64_t	swap;
-		} cswp;
-		struct {
-			uint64_t	add;
-		} fadd;
-		struct {
-			uint64_t	compare;
-			uint64_t	swap;
-			uint64_t	compare_mask;
-			uint64_t	swap_mask;
-		} m_cswp;
-		struct {
-			uint64_t	add;
-			uint64_t	nocarry_mask;
-		} m_fadd;
-	};
-	uint64_t	flags;
-	uint64_t	user_token;
-};
-
-struct rds_rdma_notify {
-	uint64_t	user_token;
-	int32_t		status;
-};
-
-#define RDS_RDMA_SUCCESS	0
-#define RDS_RDMA_REMOTE_ERROR	1
-#define RDS_RDMA_CANCELED	2
-#define RDS_RDMA_DROPPED	3
-#define RDS_RDMA_OTHER_ERROR	4
-
-/*
- * Common set of flags for all RDMA related structs
- */
-#define RDS_RDMA_READWRITE	0x0001
-#define RDS_RDMA_FENCE		0x0002	/* use FENCE for immediate send */
-#define RDS_RDMA_INVALIDATE	0x0004	/* invalidate R_Key after freeing MR */
-#define RDS_RDMA_USE_ONCE	0x0008	/* free MR after use */
-#define RDS_RDMA_DONTWAIT	0x0010	/* Don't wait in SET_BARRIER */
-#define RDS_RDMA_NOTIFY_ME	0x0020	/* Notify when operation completes */
-#define RDS_RDMA_SILENT		0x0040	/* Do not interrupt remote */
-
-#endif /* IB_RDS_H */
diff --git a/ANDROID_3.4.5/include/linux/reboot.h b/ANDROID_3.4.5/include/linux/reboot.h
deleted file mode 100644
index e0879a70..00000000
--- a/ANDROID_3.4.5/include/linux/reboot.h
+++ /dev/null
@@ -1,89 +0,0 @@
-#ifndef _LINUX_REBOOT_H
-#define _LINUX_REBOOT_H
-
-/*
- * Magic values required to use _reboot() system call.
- */
-
-#define	LINUX_REBOOT_MAGIC1	0xfee1dead
-#define	LINUX_REBOOT_MAGIC2	672274793
-#define	LINUX_REBOOT_MAGIC2A	85072278
-#define	LINUX_REBOOT_MAGIC2B	369367448
-#define	LINUX_REBOOT_MAGIC2C	537993216
-
-
-/*
- * Commands accepted by the _reboot() system call.
- *
- * RESTART     Restart system using default command and mode.
- * HALT        Stop OS and give system control to ROM monitor, if any.
- * CAD_ON      Ctrl-Alt-Del sequence causes RESTART command.
- * CAD_OFF     Ctrl-Alt-Del sequence sends SIGINT to init task.
- * POWER_OFF   Stop OS and remove all power from system, if possible.
- * RESTART2    Restart system using given command string.
- * SW_SUSPEND  Suspend system using software suspend if compiled in.
- * KEXEC       Restart system using a previously loaded Linux kernel
- */
-
-#define	LINUX_REBOOT_CMD_RESTART	0x01234567
-#define	LINUX_REBOOT_CMD_HALT		0xCDEF0123
-#define	LINUX_REBOOT_CMD_CAD_ON		0x89ABCDEF
-#define	LINUX_REBOOT_CMD_CAD_OFF	0x00000000
-#define	LINUX_REBOOT_CMD_POWER_OFF	0x4321FEDC
-#define	LINUX_REBOOT_CMD_RESTART2	0xA1B2C3D4
-#define	LINUX_REBOOT_CMD_SW_SUSPEND	0xD000FCE2
-#define	LINUX_REBOOT_CMD_KEXEC		0x45584543
-
-
-#ifdef __KERNEL__
-
-#include <linux/notifier.h>
-
-#define SYS_DOWN	0x0001	/* Notify of system down */
-#define SYS_RESTART	SYS_DOWN
-#define SYS_HALT	0x0002	/* Notify of system halt */
-#define SYS_POWER_OFF	0x0003	/* Notify of system power off */
-
-extern int register_reboot_notifier(struct notifier_block *);
-extern int unregister_reboot_notifier(struct notifier_block *);
-
-
-/*
- * Architecture-specific implementations of sys_reboot commands.
- */
-
-extern void machine_restart(char *cmd);
-extern void machine_halt(void);
-extern void machine_power_off(void);
-
-extern void machine_shutdown(void);
-struct pt_regs;
-extern void machine_crash_shutdown(struct pt_regs *);
-
-/* 
- * Architecture independent implemenations of sys_reboot commands.
- */
-
-extern void kernel_restart_prepare(char *cmd);
-extern void kernel_restart(char *cmd);
-extern void kernel_halt(void);
-extern void kernel_power_off(void);
-
-extern int C_A_D; /* for sysctl */
-void ctrl_alt_del(void);
-
-#define POWEROFF_CMD_PATH_LEN	256
-extern char poweroff_cmd[POWEROFF_CMD_PATH_LEN];
-
-extern int orderly_poweroff(bool force);
-
-/*
- * Emergency restart, callable from an interrupt handler.
- */
-
-extern void emergency_restart(void);
-#include <asm/emergency-restart.h>
-
-#endif
-
-#endif /* _LINUX_REBOOT_H */
diff --git a/ANDROID_3.4.5/include/linux/reciprocal_div.h b/ANDROID_3.4.5/include/linux/reciprocal_div.h
deleted file mode 100644
index f9c90b33..00000000
--- a/ANDROID_3.4.5/include/linux/reciprocal_div.h
+++ /dev/null
@@ -1,32 +0,0 @@
-#ifndef _LINUX_RECIPROCAL_DIV_H
-#define _LINUX_RECIPROCAL_DIV_H
-
-#include <linux/types.h>
-
-/*
- * This file describes reciprocical division.
- *
- * This optimizes the (A/B) problem, when A and B are two u32
- * and B is a known value (but not known at compile time)
- *
- * The math principle used is :
- *   Let RECIPROCAL_VALUE(B) be (((1LL << 32) + (B - 1))/ B)
- *   Then A / B = (u32)(((u64)(A) * (R)) >> 32)
- *
- * This replaces a divide by a multiply (and a shift), and
- * is generally less expensive in CPU cycles.
- */
-
-/*
- * Computes the reciprocal value (R) for the value B of the divisor.
- * Should not be called before each reciprocal_divide(),
- * or else the performance is slower than a normal divide.
- */
-extern u32 reciprocal_value(u32 B);
-
-
-static inline u32 reciprocal_divide(u32 A, u32 R)
-{
-	return (u32)(((u64)A * R) >> 32);
-}
-#endif
diff --git a/ANDROID_3.4.5/include/linux/regmap.h b/ANDROID_3.4.5/include/linux/regmap.h
deleted file mode 100644
index a90abb6b..00000000
--- a/ANDROID_3.4.5/include/linux/regmap.h
+++ /dev/null
@@ -1,332 +0,0 @@
-#ifndef __LINUX_REGMAP_H
-#define __LINUX_REGMAP_H
-
-/*
- * Register map access API
- *
- * Copyright 2011 Wolfson Microelectronics plc
- *
- * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/list.h>
-
-struct module;
-struct device;
-struct i2c_client;
-struct spi_device;
-struct regmap;
-
-/* An enum of all the supported cache types */
-enum regcache_type {
-	REGCACHE_NONE,
-	REGCACHE_RBTREE,
-	REGCACHE_COMPRESSED
-};
-
-/**
- * Default value for a register.  We use an array of structs rather
- * than a simple array as many modern devices have very sparse
- * register maps.
- *
- * @reg: Register address.
- * @def: Register default value.
- */
-struct reg_default {
-	unsigned int reg;
-	unsigned int def;
-};
-
-#ifdef CONFIG_REGMAP
-
-/**
- * Configuration for the register map of a device.
- *
- * @reg_bits: Number of bits in a register address, mandatory.
- * @pad_bits: Number of bits of padding between register and value.
- * @val_bits: Number of bits in a register value, mandatory.
- *
- * @writeable_reg: Optional callback returning true if the register
- *                 can be written to.
- * @readable_reg: Optional callback returning true if the register
- *                can be read from.
- * @volatile_reg: Optional callback returning true if the register
- *                value can't be cached.
- * @precious_reg: Optional callback returning true if the rgister
- *                should not be read outside of a call from the driver
- *                (eg, a clear on read interrupt status register).
- *
- * @max_register: Optional, specifies the maximum valid register index.
- * @reg_defaults: Power on reset values for registers (for use with
- *                register cache support).
- * @num_reg_defaults: Number of elements in reg_defaults.
- *
- * @read_flag_mask: Mask to be set in the top byte of the register when doing
- *                  a read.
- * @write_flag_mask: Mask to be set in the top byte of the register when doing
- *                   a write. If both read_flag_mask and write_flag_mask are
- *                   empty the regmap_bus default masks are used.
- *
- * @cache_type: The actual cache type.
- * @reg_defaults_raw: Power on reset values for registers (for use with
- *                    register cache support).
- * @num_reg_defaults_raw: Number of elements in reg_defaults_raw.
- */
-struct regmap_config {
-	int reg_bits;
-	int pad_bits;
-	int val_bits;
-
-	bool (*writeable_reg)(struct device *dev, unsigned int reg);
-	bool (*readable_reg)(struct device *dev, unsigned int reg);
-	bool (*volatile_reg)(struct device *dev, unsigned int reg);
-	bool (*precious_reg)(struct device *dev, unsigned int reg);
-
-	unsigned int max_register;
-	const struct reg_default *reg_defaults;
-	unsigned int num_reg_defaults;
-	enum regcache_type cache_type;
-	const void *reg_defaults_raw;
-	unsigned int num_reg_defaults_raw;
-
-	u8 read_flag_mask;
-	u8 write_flag_mask;
-};
-
-typedef int (*regmap_hw_write)(struct device *dev, const void *data,
-			       size_t count);
-typedef int (*regmap_hw_gather_write)(struct device *dev,
-				      const void *reg, size_t reg_len,
-				      const void *val, size_t val_len);
-typedef int (*regmap_hw_read)(struct device *dev,
-			      const void *reg_buf, size_t reg_size,
-			      void *val_buf, size_t val_size);
-
-/**
- * Description of a hardware bus for the register map infrastructure.
- *
- * @write: Write operation.
- * @gather_write: Write operation with split register/value, return -ENOTSUPP
- *                if not implemented  on a given device.
- * @read: Read operation.  Data is returned in the buffer used to transmit
- *         data.
- * @read_flag_mask: Mask to be set in the top byte of the register when doing
- *                  a read.
- */
-struct regmap_bus {
-	regmap_hw_write write;
-	regmap_hw_gather_write gather_write;
-	regmap_hw_read read;
-	u8 read_flag_mask;
-};
-
-struct regmap *regmap_init(struct device *dev,
-			   const struct regmap_bus *bus,
-			   const struct regmap_config *config);
-struct regmap *regmap_init_i2c(struct i2c_client *i2c,
-			       const struct regmap_config *config);
-struct regmap *regmap_init_spi(struct spi_device *dev,
-			       const struct regmap_config *config);
-
-struct regmap *devm_regmap_init(struct device *dev,
-				const struct regmap_bus *bus,
-				const struct regmap_config *config);
-struct regmap *devm_regmap_init_i2c(struct i2c_client *i2c,
-				    const struct regmap_config *config);
-struct regmap *devm_regmap_init_spi(struct spi_device *dev,
-				    const struct regmap_config *config);
-
-void regmap_exit(struct regmap *map);
-int regmap_reinit_cache(struct regmap *map,
-			const struct regmap_config *config);
-int regmap_write(struct regmap *map, unsigned int reg, unsigned int val);
-int regmap_raw_write(struct regmap *map, unsigned int reg,
-		     const void *val, size_t val_len);
-int regmap_bulk_write(struct regmap *map, unsigned int reg, const void *val,
-			size_t val_count);
-int regmap_read(struct regmap *map, unsigned int reg, unsigned int *val);
-int regmap_raw_read(struct regmap *map, unsigned int reg,
-		    void *val, size_t val_len);
-int regmap_bulk_read(struct regmap *map, unsigned int reg, void *val,
-		     size_t val_count);
-int regmap_update_bits(struct regmap *map, unsigned int reg,
-		       unsigned int mask, unsigned int val);
-int regmap_update_bits_check(struct regmap *map, unsigned int reg,
-			     unsigned int mask, unsigned int val,
-			     bool *change);
-int regmap_get_val_bytes(struct regmap *map);
-
-int regcache_sync(struct regmap *map);
-int regcache_sync_region(struct regmap *map, unsigned int min,
-			 unsigned int max);
-void regcache_cache_only(struct regmap *map, bool enable);
-void regcache_cache_bypass(struct regmap *map, bool enable);
-void regcache_mark_dirty(struct regmap *map);
-
-int regmap_register_patch(struct regmap *map, const struct reg_default *regs,
-			  int num_regs);
-
-/**
- * Description of an IRQ for the generic regmap irq_chip.
- *
- * @reg_offset: Offset of the status/mask register within the bank
- * @mask:       Mask used to flag/control the register.
- */
-struct regmap_irq {
-	unsigned int reg_offset;
-	unsigned int mask;
-};
-
-/**
- * Description of a generic regmap irq_chip.  This is not intended to
- * handle every possible interrupt controller, but it should handle a
- * substantial proportion of those that are found in the wild.
- *
- * @name:        Descriptive name for IRQ controller.
- *
- * @status_base: Base status register address.
- * @mask_base:   Base mask register address.
- * @ack_base:    Base ack address.  If zero then the chip is clear on read.
- *
- * @num_regs:    Number of registers in each control bank.
- * @irqs:        Descriptors for individual IRQs.  Interrupt numbers are
- *               assigned based on the index in the array of the interrupt.
- * @num_irqs:    Number of descriptors.
- */
-struct regmap_irq_chip {
-	const char *name;
-
-	unsigned int status_base;
-	unsigned int mask_base;
-	unsigned int ack_base;
-
-	int num_regs;
-
-	const struct regmap_irq *irqs;
-	int num_irqs;
-};
-
-struct regmap_irq_chip_data;
-
-int regmap_add_irq_chip(struct regmap *map, int irq, int irq_flags,
-			int irq_base, struct regmap_irq_chip *chip,
-			struct regmap_irq_chip_data **data);
-void regmap_del_irq_chip(int irq, struct regmap_irq_chip_data *data);
-int regmap_irq_chip_get_base(struct regmap_irq_chip_data *data);
-
-#else
-
-/*
- * These stubs should only ever be called by generic code which has
- * regmap based facilities, if they ever get called at runtime
- * something is going wrong and something probably needs to select
- * REGMAP.
- */
-
-static inline int regmap_write(struct regmap *map, unsigned int reg,
-			       unsigned int val)
-{
-	WARN_ONCE(1, "regmap API is disabled");
-	return -EINVAL;
-}
-
-static inline int regmap_raw_write(struct regmap *map, unsigned int reg,
-				   const void *val, size_t val_len)
-{
-	WARN_ONCE(1, "regmap API is disabled");
-	return -EINVAL;
-}
-
-static inline int regmap_bulk_write(struct regmap *map, unsigned int reg,
-				    const void *val, size_t val_count)
-{
-	WARN_ONCE(1, "regmap API is disabled");
-	return -EINVAL;
-}
-
-static inline int regmap_read(struct regmap *map, unsigned int reg,
-			      unsigned int *val)
-{
-	WARN_ONCE(1, "regmap API is disabled");
-	return -EINVAL;
-}
-
-static inline int regmap_raw_read(struct regmap *map, unsigned int reg,
-				  void *val, size_t val_len)
-{
-	WARN_ONCE(1, "regmap API is disabled");
-	return -EINVAL;
-}
-
-static inline int regmap_bulk_read(struct regmap *map, unsigned int reg,
-				   void *val, size_t val_count)
-{
-	WARN_ONCE(1, "regmap API is disabled");
-	return -EINVAL;
-}
-
-static inline int regmap_update_bits(struct regmap *map, unsigned int reg,
-				     unsigned int mask, unsigned int val)
-{
-	WARN_ONCE(1, "regmap API is disabled");
-	return -EINVAL;
-}
-
-static inline int regmap_update_bits_check(struct regmap *map,
-					   unsigned int reg,
-					   unsigned int mask, unsigned int val,
-					   bool *change)
-{
-	WARN_ONCE(1, "regmap API is disabled");
-	return -EINVAL;
-}
-
-static inline int regmap_get_val_bytes(struct regmap *map)
-{
-	WARN_ONCE(1, "regmap API is disabled");
-	return -EINVAL;
-}
-
-static inline int regcache_sync(struct regmap *map)
-{
-	WARN_ONCE(1, "regmap API is disabled");
-	return -EINVAL;
-}
-
-static inline int regcache_sync_region(struct regmap *map, unsigned int min,
-				       unsigned int max)
-{
-	WARN_ONCE(1, "regmap API is disabled");
-	return -EINVAL;
-}
-
-static inline void regcache_cache_only(struct regmap *map, bool enable)
-{
-	WARN_ONCE(1, "regmap API is disabled");
-}
-
-static inline void regcache_cache_bypass(struct regmap *map, bool enable)
-{
-	WARN_ONCE(1, "regmap API is disabled");
-}
-
-static inline void regcache_mark_dirty(struct regmap *map)
-{
-	WARN_ONCE(1, "regmap API is disabled");
-}
-
-static inline int regmap_register_patch(struct regmap *map,
-					const struct reg_default *regs,
-					int num_regs)
-{
-	WARN_ONCE(1, "regmap API is disabled");
-	return -EINVAL;
-}
-
-#endif
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/regset.h b/ANDROID_3.4.5/include/linux/regset.h
deleted file mode 100644
index 8e0c9feb..00000000
--- a/ANDROID_3.4.5/include/linux/regset.h
+++ /dev/null
@@ -1,375 +0,0 @@
-/*
- * User-mode machine state access
- *
- * Copyright (C) 2007 Red Hat, Inc.  All rights reserved.
- *
- * This copyrighted material is made available to anyone wishing to use,
- * modify, copy, or redistribute it subject to the terms and conditions
- * of the GNU General Public License v.2.
- *
- * Red Hat Author: Roland McGrath.
- */
-
-#ifndef _LINUX_REGSET_H
-#define _LINUX_REGSET_H	1
-
-#include <linux/compiler.h>
-#include <linux/types.h>
-#include <linux/bug.h>
-#include <linux/uaccess.h>
-struct task_struct;
-struct user_regset;
-
-
-/**
- * user_regset_active_fn - type of @active function in &struct user_regset
- * @target:	thread being examined
- * @regset:	regset being examined
- *
- * Return -%ENODEV if not available on the hardware found.
- * Return %0 if no interesting state in this thread.
- * Return >%0 number of @size units of interesting state.
- * Any get call fetching state beyond that number will
- * see the default initialization state for this data,
- * so a caller that knows what the default state is need
- * not copy it all out.
- * This call is optional; the pointer is %NULL if there
- * is no inexpensive check to yield a value < @n.
- */
-typedef int user_regset_active_fn(struct task_struct *target,
-				  const struct user_regset *regset);
-
-/**
- * user_regset_get_fn - type of @get function in &struct user_regset
- * @target:	thread being examined
- * @regset:	regset being examined
- * @pos:	offset into the regset data to access, in bytes
- * @count:	amount of data to copy, in bytes
- * @kbuf:	if not %NULL, a kernel-space pointer to copy into
- * @ubuf:	if @kbuf is %NULL, a user-space pointer to copy into
- *
- * Fetch register values.  Return %0 on success; -%EIO or -%ENODEV
- * are usual failure returns.  The @pos and @count values are in
- * bytes, but must be properly aligned.  If @kbuf is non-null, that
- * buffer is used and @ubuf is ignored.  If @kbuf is %NULL, then
- * ubuf gives a userland pointer to access directly, and an -%EFAULT
- * return value is possible.
- */
-typedef int user_regset_get_fn(struct task_struct *target,
-			       const struct user_regset *regset,
-			       unsigned int pos, unsigned int count,
-			       void *kbuf, void __user *ubuf);
-
-/**
- * user_regset_set_fn - type of @set function in &struct user_regset
- * @target:	thread being examined
- * @regset:	regset being examined
- * @pos:	offset into the regset data to access, in bytes
- * @count:	amount of data to copy, in bytes
- * @kbuf:	if not %NULL, a kernel-space pointer to copy from
- * @ubuf:	if @kbuf is %NULL, a user-space pointer to copy from
- *
- * Store register values.  Return %0 on success; -%EIO or -%ENODEV
- * are usual failure returns.  The @pos and @count values are in
- * bytes, but must be properly aligned.  If @kbuf is non-null, that
- * buffer is used and @ubuf is ignored.  If @kbuf is %NULL, then
- * ubuf gives a userland pointer to access directly, and an -%EFAULT
- * return value is possible.
- */
-typedef int user_regset_set_fn(struct task_struct *target,
-			       const struct user_regset *regset,
-			       unsigned int pos, unsigned int count,
-			       const void *kbuf, const void __user *ubuf);
-
-/**
- * user_regset_writeback_fn - type of @writeback function in &struct user_regset
- * @target:	thread being examined
- * @regset:	regset being examined
- * @immediate:	zero if writeback at completion of next context switch is OK
- *
- * This call is optional; usually the pointer is %NULL.  When
- * provided, there is some user memory associated with this regset's
- * hardware, such as memory backing cached register data on register
- * window machines; the regset's data controls what user memory is
- * used (e.g. via the stack pointer value).
- *
- * Write register data back to user memory.  If the @immediate flag
- * is nonzero, it must be written to the user memory so uaccess or
- * access_process_vm() can see it when this call returns; if zero,
- * then it must be written back by the time the task completes a
- * context switch (as synchronized with wait_task_inactive()).
- * Return %0 on success or if there was nothing to do, -%EFAULT for
- * a memory problem (bad stack pointer or whatever), or -%EIO for a
- * hardware problem.
- */
-typedef int user_regset_writeback_fn(struct task_struct *target,
-				     const struct user_regset *regset,
-				     int immediate);
-
-/**
- * struct user_regset - accessible thread CPU state
- * @n:			Number of slots (registers).
- * @size:		Size in bytes of a slot (register).
- * @align:		Required alignment, in bytes.
- * @bias:		Bias from natural indexing.
- * @core_note_type:	ELF note @n_type value used in core dumps.
- * @get:		Function to fetch values.
- * @set:		Function to store values.
- * @active:		Function to report if regset is active, or %NULL.
- * @writeback:		Function to write data back to user memory, or %NULL.
- *
- * This data structure describes a machine resource we call a register set.
- * This is part of the state of an individual thread, not necessarily
- * actual CPU registers per se.  A register set consists of a number of
- * similar slots, given by @n.  Each slot is @size bytes, and aligned to
- * @align bytes (which is at least @size).
- *
- * These functions must be called only on the current thread or on a
- * thread that is in %TASK_STOPPED or %TASK_TRACED state, that we are
- * guaranteed will not be woken up and return to user mode, and that we
- * have called wait_task_inactive() on.  (The target thread always might
- * wake up for SIGKILL while these functions are working, in which case
- * that thread's user_regset state might be scrambled.)
- *
- * The @pos argument must be aligned according to @align; the @count
- * argument must be a multiple of @size.  These functions are not
- * responsible for checking for invalid arguments.
- *
- * When there is a natural value to use as an index, @bias gives the
- * difference between the natural index and the slot index for the
- * register set.  For example, x86 GDT segment descriptors form a regset;
- * the segment selector produces a natural index, but only a subset of
- * that index space is available as a regset (the TLS slots); subtracting
- * @bias from a segment selector index value computes the regset slot.
- *
- * If nonzero, @core_note_type gives the n_type field (NT_* value)
- * of the core file note in which this regset's data appears.
- * NT_PRSTATUS is a special case in that the regset data starts at
- * offsetof(struct elf_prstatus, pr_reg) into the note data; that is
- * part of the per-machine ELF formats userland knows about.  In
- * other cases, the core file note contains exactly the whole regset
- * (@n * @size) and nothing else.  The core file note is normally
- * omitted when there is an @active function and it returns zero.
- */
-struct user_regset {
-	user_regset_get_fn		*get;
-	user_regset_set_fn		*set;
-	user_regset_active_fn		*active;
-	user_regset_writeback_fn	*writeback;
-	unsigned int			n;
-	unsigned int 			size;
-	unsigned int 			align;
-	unsigned int 			bias;
-	unsigned int 			core_note_type;
-};
-
-/**
- * struct user_regset_view - available regsets
- * @name:	Identifier, e.g. UTS_MACHINE string.
- * @regsets:	Array of @n regsets available in this view.
- * @n:		Number of elements in @regsets.
- * @e_machine:	ELF header @e_machine %EM_* value written in core dumps.
- * @e_flags:	ELF header @e_flags value written in core dumps.
- * @ei_osabi:	ELF header @e_ident[%EI_OSABI] value written in core dumps.
- *
- * A regset view is a collection of regsets (&struct user_regset,
- * above).  This describes all the state of a thread that can be seen
- * from a given architecture/ABI environment.  More than one view might
- * refer to the same &struct user_regset, or more than one regset
- * might refer to the same machine-specific state in the thread.  For
- * example, a 32-bit thread's state could be examined from the 32-bit
- * view or from the 64-bit view.  Either method reaches the same thread
- * register state, doing appropriate widening or truncation.
- */
-struct user_regset_view {
-	const char *name;
-	const struct user_regset *regsets;
-	unsigned int n;
-	u32 e_flags;
-	u16 e_machine;
-	u8 ei_osabi;
-};
-
-/*
- * This is documented here rather than at the definition sites because its
- * implementation is machine-dependent but its interface is universal.
- */
-/**
- * task_user_regset_view - Return the process's native regset view.
- * @tsk: a thread of the process in question
- *
- * Return the &struct user_regset_view that is native for the given process.
- * For example, what it would access when it called ptrace().
- * Throughout the life of the process, this only changes at exec.
- */
-const struct user_regset_view *task_user_regset_view(struct task_struct *tsk);
-
-
-/*
- * These are helpers for writing regset get/set functions in arch code.
- * Because @start_pos and @end_pos are always compile-time constants,
- * these are inlined into very little code though they look large.
- *
- * Use one or more calls sequentially for each chunk of regset data stored
- * contiguously in memory.  Call with constants for @start_pos and @end_pos,
- * giving the range of byte positions in the regset that data corresponds
- * to; @end_pos can be -1 if this chunk is at the end of the regset layout.
- * Each call updates the arguments to point past its chunk.
- */
-
-static inline int user_regset_copyout(unsigned int *pos, unsigned int *count,
-				      void **kbuf,
-				      void __user **ubuf, const void *data,
-				      const int start_pos, const int end_pos)
-{
-	if (*count == 0)
-		return 0;
-	BUG_ON(*pos < start_pos);
-	if (end_pos < 0 || *pos < end_pos) {
-		unsigned int copy = (end_pos < 0 ? *count
-				     : min(*count, end_pos - *pos));
-		data += *pos - start_pos;
-		if (*kbuf) {
-			memcpy(*kbuf, data, copy);
-			*kbuf += copy;
-		} else if (__copy_to_user(*ubuf, data, copy))
-			return -EFAULT;
-		else
-			*ubuf += copy;
-		*pos += copy;
-		*count -= copy;
-	}
-	return 0;
-}
-
-static inline int user_regset_copyin(unsigned int *pos, unsigned int *count,
-				     const void **kbuf,
-				     const void __user **ubuf, void *data,
-				     const int start_pos, const int end_pos)
-{
-	if (*count == 0)
-		return 0;
-	BUG_ON(*pos < start_pos);
-	if (end_pos < 0 || *pos < end_pos) {
-		unsigned int copy = (end_pos < 0 ? *count
-				     : min(*count, end_pos - *pos));
-		data += *pos - start_pos;
-		if (*kbuf) {
-			memcpy(data, *kbuf, copy);
-			*kbuf += copy;
-		} else if (__copy_from_user(data, *ubuf, copy))
-			return -EFAULT;
-		else
-			*ubuf += copy;
-		*pos += copy;
-		*count -= copy;
-	}
-	return 0;
-}
-
-/*
- * These two parallel the two above, but for portions of a regset layout
- * that always read as all-zero or for which writes are ignored.
- */
-static inline int user_regset_copyout_zero(unsigned int *pos,
-					   unsigned int *count,
-					   void **kbuf, void __user **ubuf,
-					   const int start_pos,
-					   const int end_pos)
-{
-	if (*count == 0)
-		return 0;
-	BUG_ON(*pos < start_pos);
-	if (end_pos < 0 || *pos < end_pos) {
-		unsigned int copy = (end_pos < 0 ? *count
-				     : min(*count, end_pos - *pos));
-		if (*kbuf) {
-			memset(*kbuf, 0, copy);
-			*kbuf += copy;
-		} else if (__clear_user(*ubuf, copy))
-			return -EFAULT;
-		else
-			*ubuf += copy;
-		*pos += copy;
-		*count -= copy;
-	}
-	return 0;
-}
-
-static inline int user_regset_copyin_ignore(unsigned int *pos,
-					    unsigned int *count,
-					    const void **kbuf,
-					    const void __user **ubuf,
-					    const int start_pos,
-					    const int end_pos)
-{
-	if (*count == 0)
-		return 0;
-	BUG_ON(*pos < start_pos);
-	if (end_pos < 0 || *pos < end_pos) {
-		unsigned int copy = (end_pos < 0 ? *count
-				     : min(*count, end_pos - *pos));
-		if (*kbuf)
-			*kbuf += copy;
-		else
-			*ubuf += copy;
-		*pos += copy;
-		*count -= copy;
-	}
-	return 0;
-}
-
-/**
- * copy_regset_to_user - fetch a thread's user_regset data into user memory
- * @target:	thread to be examined
- * @view:	&struct user_regset_view describing user thread machine state
- * @setno:	index in @view->regsets
- * @offset:	offset into the regset data, in bytes
- * @size:	amount of data to copy, in bytes
- * @data:	user-mode pointer to copy into
- */
-static inline int copy_regset_to_user(struct task_struct *target,
-				      const struct user_regset_view *view,
-				      unsigned int setno,
-				      unsigned int offset, unsigned int size,
-				      void __user *data)
-{
-	const struct user_regset *regset = &view->regsets[setno];
-
-	if (!regset->get)
-		return -EOPNOTSUPP;
-
-	if (!access_ok(VERIFY_WRITE, data, size))
-		return -EFAULT;
-
-	return regset->get(target, regset, offset, size, NULL, data);
-}
-
-/**
- * copy_regset_from_user - store into thread's user_regset data from user memory
- * @target:	thread to be examined
- * @view:	&struct user_regset_view describing user thread machine state
- * @setno:	index in @view->regsets
- * @offset:	offset into the regset data, in bytes
- * @size:	amount of data to copy, in bytes
- * @data:	user-mode pointer to copy from
- */
-static inline int copy_regset_from_user(struct task_struct *target,
-					const struct user_regset_view *view,
-					unsigned int setno,
-					unsigned int offset, unsigned int size,
-					const void __user *data)
-{
-	const struct user_regset *regset = &view->regsets[setno];
-
-	if (!regset->set)
-		return -EOPNOTSUPP;
-
-	if (!access_ok(VERIFY_READ, data, size))
-		return -EFAULT;
-
-	return regset->set(target, regset, offset, size, NULL, data);
-}
-
-
-#endif	/* <linux/regset.h> */
diff --git a/ANDROID_3.4.5/include/linux/regulator/ab8500.h b/ANDROID_3.4.5/include/linux/regulator/ab8500.h
deleted file mode 100644
index 7bd73bbd..00000000
--- a/ANDROID_3.4.5/include/linux/regulator/ab8500.h
+++ /dev/null
@@ -1,142 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * License Terms: GNU General Public License v2
- *
- * Authors: Sundar Iyer <sundar.iyer@stericsson.com> for ST-Ericsson
- *          Bengt Jonsson <bengt.g.jonsson@stericsson.com> for ST-Ericsson
- */
-
-#ifndef __LINUX_MFD_AB8500_REGULATOR_H
-#define __LINUX_MFD_AB8500_REGULATOR_H
-
-/* AB8500 regulators */
-enum ab8500_regulator_id {
-	AB8500_LDO_AUX1,
-	AB8500_LDO_AUX2,
-	AB8500_LDO_AUX3,
-	AB8500_LDO_INTCORE,
-	AB8500_LDO_TVOUT,
-	AB8500_LDO_USB,
-	AB8500_LDO_AUDIO,
-	AB8500_LDO_ANAMIC1,
-	AB8500_LDO_ANAMIC2,
-	AB8500_LDO_DMIC,
-	AB8500_LDO_ANA,
-	AB8500_NUM_REGULATORS,
-};
-
-/* AB9450 regulators */
-enum ab9540_regulator_id {
-	AB9540_LDO_AUX1,
-	AB9540_LDO_AUX2,
-	AB9540_LDO_AUX3,
-	AB9540_LDO_AUX4,
-	AB9540_LDO_INTCORE,
-	AB9540_LDO_TVOUT,
-	AB9540_LDO_USB,
-	AB9540_LDO_AUDIO,
-	AB9540_LDO_ANAMIC1,
-	AB9540_LDO_ANAMIC2,
-	AB9540_LDO_DMIC,
-	AB9540_LDO_ANA,
-	AB9540_SYSCLKREQ_2,
-	AB9540_SYSCLKREQ_4,
-	AB9540_NUM_REGULATORS,
-};
-
-/* AB8500 and AB9540 register initialization */
-struct ab8500_regulator_reg_init {
-	int id;
-	u8 value;
-};
-
-#define INIT_REGULATOR_REGISTER(_id, _value)	\
-	{					\
-		.id = _id,			\
-		.value = _value,		\
-	}
-
-/* AB8500 registers */
-enum ab8500_regulator_reg {
-	AB8500_REGUREQUESTCTRL2,
-	AB8500_REGUREQUESTCTRL3,
-	AB8500_REGUREQUESTCTRL4,
-	AB8500_REGUSYSCLKREQ1HPVALID1,
-	AB8500_REGUSYSCLKREQ1HPVALID2,
-	AB8500_REGUHWHPREQ1VALID1,
-	AB8500_REGUHWHPREQ1VALID2,
-	AB8500_REGUHWHPREQ2VALID1,
-	AB8500_REGUHWHPREQ2VALID2,
-	AB8500_REGUSWHPREQVALID1,
-	AB8500_REGUSWHPREQVALID2,
-	AB8500_REGUSYSCLKREQVALID1,
-	AB8500_REGUSYSCLKREQVALID2,
-	AB8500_REGUMISC1,
-	AB8500_VAUDIOSUPPLY,
-	AB8500_REGUCTRL1VAMIC,
-	AB8500_VPLLVANAREGU,
-	AB8500_VREFDDR,
-	AB8500_EXTSUPPLYREGU,
-	AB8500_VAUX12REGU,
-	AB8500_VRF1VAUX3REGU,
-	AB8500_VAUX1SEL,
-	AB8500_VAUX2SEL,
-	AB8500_VRF1VAUX3SEL,
-	AB8500_REGUCTRL2SPARE,
-	AB8500_REGUCTRLDISCH,
-	AB8500_REGUCTRLDISCH2,
-	AB8500_VSMPS1SEL1,
-	AB8500_NUM_REGULATOR_REGISTERS,
-};
-
-
-/* AB9540 registers */
-enum ab9540_regulator_reg {
-	AB9540_REGUREQUESTCTRL1,
-	AB9540_REGUREQUESTCTRL2,
-	AB9540_REGUREQUESTCTRL3,
-	AB9540_REGUREQUESTCTRL4,
-	AB9540_REGUSYSCLKREQ1HPVALID1,
-	AB9540_REGUSYSCLKREQ1HPVALID2,
-	AB9540_REGUHWHPREQ1VALID1,
-	AB9540_REGUHWHPREQ1VALID2,
-	AB9540_REGUHWHPREQ2VALID1,
-	AB9540_REGUHWHPREQ2VALID2,
-	AB9540_REGUSWHPREQVALID1,
-	AB9540_REGUSWHPREQVALID2,
-	AB9540_REGUSYSCLKREQVALID1,
-	AB9540_REGUSYSCLKREQVALID2,
-	AB9540_REGUVAUX4REQVALID,
-	AB9540_REGUMISC1,
-	AB9540_VAUDIOSUPPLY,
-	AB9540_REGUCTRL1VAMIC,
-	AB9540_VSMPS1REGU,
-	AB9540_VSMPS2REGU,
-	AB9540_VSMPS3REGU, /* NOTE! PRCMU register */
-	AB9540_VPLLVANAREGU,
-	AB9540_EXTSUPPLYREGU,
-	AB9540_VAUX12REGU,
-	AB9540_VRF1VAUX3REGU,
-	AB9540_VSMPS1SEL1,
-	AB9540_VSMPS1SEL2,
-	AB9540_VSMPS1SEL3,
-	AB9540_VSMPS2SEL1,
-	AB9540_VSMPS2SEL2,
-	AB9540_VSMPS2SEL3,
-	AB9540_VSMPS3SEL1, /* NOTE! PRCMU register */
-	AB9540_VSMPS3SEL2, /* NOTE! PRCMU register */
-	AB9540_VAUX1SEL,
-	AB9540_VAUX2SEL,
-	AB9540_VRF1VAUX3SEL,
-	AB9540_REGUCTRL2SPARE,
-	AB9540_VAUX4REQCTRL,
-	AB9540_VAUX4REGU,
-	AB9540_VAUX4SEL,
-	AB9540_REGUCTRLDISCH,
-	AB9540_REGUCTRLDISCH2,
-	AB9540_REGUCTRLDISCH3,
-	AB9540_NUM_REGULATOR_REGISTERS,
-};
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/regulator/consumer.h b/ANDROID_3.4.5/include/linux/regulator/consumer.h
deleted file mode 100644
index 4ed1b30a..00000000
--- a/ANDROID_3.4.5/include/linux/regulator/consumer.h
+++ /dev/null
@@ -1,349 +0,0 @@
-/*
- * consumer.h -- SoC Regulator consumer support.
- *
- * Copyright (C) 2007, 2008 Wolfson Microelectronics PLC.
- *
- * Author: Liam Girdwood <lrg@slimlogic.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Regulator Consumer Interface.
- *
- * A Power Management Regulator framework for SoC based devices.
- * Features:-
- *   o Voltage and current level control.
- *   o Operating mode control.
- *   o Regulator status.
- *   o sysfs entries for showing client devices and status
- *
- * EXPERIMENTAL FEATURES:
- *   Dynamic Regulator operating Mode Switching (DRMS) - allows regulators
- *   to use most efficient operating mode depending upon voltage and load and
- *   is transparent to client drivers.
- *
- *   e.g. Devices x,y,z share regulator r. Device x and y draw 20mA each during
- *   IO and 1mA at idle. Device z draws 100mA when under load and 5mA when
- *   idling. Regulator r has > 90% efficiency in NORMAL mode at loads > 100mA
- *   but this drops rapidly to 60% when below 100mA. Regulator r has > 90%
- *   efficiency in IDLE mode at loads < 10mA. Thus regulator r will operate
- *   in normal mode for loads > 10mA and in IDLE mode for load <= 10mA.
- *
- */
-
-#ifndef __LINUX_REGULATOR_CONSUMER_H_
-#define __LINUX_REGULATOR_CONSUMER_H_
-
-struct device;
-struct notifier_block;
-
-/*
- * Regulator operating modes.
- *
- * Regulators can run in a variety of different operating modes depending on
- * output load. This allows further system power savings by selecting the
- * best (and most efficient) regulator mode for a desired load.
- *
- * Most drivers will only care about NORMAL. The modes below are generic and
- * will probably not match the naming convention of your regulator data sheet
- * but should match the use cases in the datasheet.
- *
- * In order of power efficiency (least efficient at top).
- *
- *  Mode       Description
- *  FAST       Regulator can handle fast changes in it's load.
- *             e.g. useful in CPU voltage & frequency scaling where
- *             load can quickly increase with CPU frequency increases.
- *
- *  NORMAL     Normal regulator power supply mode. Most drivers will
- *             use this mode.
- *
- *  IDLE       Regulator runs in a more efficient mode for light
- *             loads. Can be used for devices that have a low power
- *             requirement during periods of inactivity. This mode
- *             may be more noisy than NORMAL and may not be able
- *             to handle fast load switching.
- *
- *  STANDBY    Regulator runs in the most efficient mode for very
- *             light loads. Can be used by devices when they are
- *             in a sleep/standby state. This mode is likely to be
- *             the most noisy and may not be able to handle fast load
- *             switching.
- *
- * NOTE: Most regulators will only support a subset of these modes. Some
- * will only just support NORMAL.
- *
- * These modes can be OR'ed together to make up a mask of valid register modes.
- */
-
-#define REGULATOR_MODE_FAST			0x1
-#define REGULATOR_MODE_NORMAL			0x2
-#define REGULATOR_MODE_IDLE			0x4
-#define REGULATOR_MODE_STANDBY			0x8
-
-/*
- * Regulator notifier events.
- *
- * UNDER_VOLTAGE  Regulator output is under voltage.
- * OVER_CURRENT   Regulator output current is too high.
- * REGULATION_OUT Regulator output is out of regulation.
- * FAIL           Regulator output has failed.
- * OVER_TEMP      Regulator over temp.
- * FORCE_DISABLE  Regulator forcibly shut down by software.
- * VOLTAGE_CHANGE Regulator voltage changed.
- * DISABLE        Regulator was disabled.
- *
- * NOTE: These events can be OR'ed together when passed into handler.
- */
-
-#define REGULATOR_EVENT_UNDER_VOLTAGE		0x01
-#define REGULATOR_EVENT_OVER_CURRENT		0x02
-#define REGULATOR_EVENT_REGULATION_OUT		0x04
-#define REGULATOR_EVENT_FAIL			0x08
-#define REGULATOR_EVENT_OVER_TEMP		0x10
-#define REGULATOR_EVENT_FORCE_DISABLE		0x20
-#define REGULATOR_EVENT_VOLTAGE_CHANGE		0x40
-#define REGULATOR_EVENT_DISABLE 		0x80
-
-struct regulator;
-
-/**
- * struct regulator_bulk_data - Data used for bulk regulator operations.
- *
- * @supply:   The name of the supply.  Initialised by the user before
- *            using the bulk regulator APIs.
- * @consumer: The regulator consumer for the supply.  This will be managed
- *            by the bulk API.
- *
- * The regulator APIs provide a series of regulator_bulk_() API calls as
- * a convenience to consumers which require multiple supplies.  This
- * structure is used to manage data for these calls.
- */
-struct regulator_bulk_data {
-	const char *supply;
-	struct regulator *consumer;
-
-	/* private: Internal use */
-	int ret;
-};
-
-#if defined(CONFIG_REGULATOR)
-
-/* regulator get and put */
-struct regulator *__must_check regulator_get(struct device *dev,
-					     const char *id);
-struct regulator *__must_check devm_regulator_get(struct device *dev,
-					     const char *id);
-struct regulator *__must_check regulator_get_exclusive(struct device *dev,
-						       const char *id);
-void regulator_put(struct regulator *regulator);
-void devm_regulator_put(struct regulator *regulator);
-
-/* regulator output control and status */
-int regulator_enable(struct regulator *regulator);
-int regulator_disable(struct regulator *regulator);
-int regulator_force_disable(struct regulator *regulator);
-int regulator_is_enabled(struct regulator *regulator);
-int regulator_disable_deferred(struct regulator *regulator, int ms);
-
-int regulator_bulk_get(struct device *dev, int num_consumers,
-		       struct regulator_bulk_data *consumers);
-int devm_regulator_bulk_get(struct device *dev, int num_consumers,
-			    struct regulator_bulk_data *consumers);
-int regulator_bulk_enable(int num_consumers,
-			  struct regulator_bulk_data *consumers);
-int regulator_bulk_disable(int num_consumers,
-			   struct regulator_bulk_data *consumers);
-int regulator_bulk_force_disable(int num_consumers,
-			   struct regulator_bulk_data *consumers);
-void regulator_bulk_free(int num_consumers,
-			 struct regulator_bulk_data *consumers);
-
-int regulator_count_voltages(struct regulator *regulator);
-int regulator_list_voltage(struct regulator *regulator, unsigned selector);
-int regulator_is_supported_voltage(struct regulator *regulator,
-				   int min_uV, int max_uV);
-int regulator_set_voltage(struct regulator *regulator, int min_uV, int max_uV);
-int regulator_set_voltage_time(struct regulator *regulator,
-			       int old_uV, int new_uV);
-int regulator_get_voltage(struct regulator *regulator);
-int regulator_sync_voltage(struct regulator *regulator);
-int regulator_set_current_limit(struct regulator *regulator,
-			       int min_uA, int max_uA);
-int regulator_get_current_limit(struct regulator *regulator);
-
-int regulator_set_mode(struct regulator *regulator, unsigned int mode);
-unsigned int regulator_get_mode(struct regulator *regulator);
-int regulator_set_optimum_mode(struct regulator *regulator, int load_uA);
-
-/* regulator notifier block */
-int regulator_register_notifier(struct regulator *regulator,
-			      struct notifier_block *nb);
-int regulator_unregister_notifier(struct regulator *regulator,
-				struct notifier_block *nb);
-
-/* driver data - core doesn't touch */
-void *regulator_get_drvdata(struct regulator *regulator);
-void regulator_set_drvdata(struct regulator *regulator, void *data);
-
-#else
-
-/*
- * Make sure client drivers will still build on systems with no software
- * controllable voltage or current regulators.
- */
-static inline struct regulator *__must_check regulator_get(struct device *dev,
-	const char *id)
-{
-	/* Nothing except the stubbed out regulator API should be
-	 * looking at the value except to check if it is an error
-	 * value. Drivers are free to handle NULL specifically by
-	 * skipping all regulator API calls, but they don't have to.
-	 * Drivers which don't, should make sure they properly handle
-	 * corner cases of the API, such as regulator_get_voltage()
-	 * returning 0.
-	 */
-	return NULL;
-}
-
-static inline struct regulator *__must_check
-devm_regulator_get(struct device *dev, const char *id)
-{
-	return NULL;
-}
-
-static inline void regulator_put(struct regulator *regulator)
-{
-}
-
-static inline void devm_regulator_put(struct regulator *regulator)
-{
-}
-
-static inline int regulator_enable(struct regulator *regulator)
-{
-	return 0;
-}
-
-static inline int regulator_disable(struct regulator *regulator)
-{
-	return 0;
-}
-
-static inline int regulator_force_disable(struct regulator *regulator)
-{
-	return 0;
-}
-
-static inline int regulator_disable_deferred(struct regulator *regulator,
-					     int ms)
-{
-	return 0;
-}
-
-static inline int regulator_is_enabled(struct regulator *regulator)
-{
-	return 1;
-}
-
-static inline int regulator_bulk_get(struct device *dev,
-				     int num_consumers,
-				     struct regulator_bulk_data *consumers)
-{
-	return 0;
-}
-
-static inline int devm_regulator_bulk_get(struct device *dev, int num_consumers,
-					  struct regulator_bulk_data *consumers)
-{
-	return 0;
-}
-
-static inline int regulator_bulk_enable(int num_consumers,
-					struct regulator_bulk_data *consumers)
-{
-	return 0;
-}
-
-static inline int regulator_bulk_disable(int num_consumers,
-					 struct regulator_bulk_data *consumers)
-{
-	return 0;
-}
-
-static inline int regulator_bulk_force_disable(int num_consumers,
-					struct regulator_bulk_data *consumers)
-{
-	return 0;
-}
-
-static inline void regulator_bulk_free(int num_consumers,
-				       struct regulator_bulk_data *consumers)
-{
-}
-
-static inline int regulator_set_voltage(struct regulator *regulator,
-					int min_uV, int max_uV)
-{
-	return 0;
-}
-
-static inline int regulator_get_voltage(struct regulator *regulator)
-{
-	return 0;
-}
-
-static inline int regulator_set_current_limit(struct regulator *regulator,
-					     int min_uA, int max_uA)
-{
-	return 0;
-}
-
-static inline int regulator_get_current_limit(struct regulator *regulator)
-{
-	return 0;
-}
-
-static inline int regulator_set_mode(struct regulator *regulator,
-	unsigned int mode)
-{
-	return 0;
-}
-
-static inline unsigned int regulator_get_mode(struct regulator *regulator)
-{
-	return REGULATOR_MODE_NORMAL;
-}
-
-static inline int regulator_set_optimum_mode(struct regulator *regulator,
-					int load_uA)
-{
-	return REGULATOR_MODE_NORMAL;
-}
-
-static inline int regulator_register_notifier(struct regulator *regulator,
-			      struct notifier_block *nb)
-{
-	return 0;
-}
-
-static inline int regulator_unregister_notifier(struct regulator *regulator,
-				struct notifier_block *nb)
-{
-	return 0;
-}
-
-static inline void *regulator_get_drvdata(struct regulator *regulator)
-{
-	return NULL;
-}
-
-static inline void regulator_set_drvdata(struct regulator *regulator,
-	void *data)
-{
-}
-
-#endif
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/regulator/db8500-prcmu.h b/ANDROID_3.4.5/include/linux/regulator/db8500-prcmu.h
deleted file mode 100644
index 61206231..00000000
--- a/ANDROID_3.4.5/include/linux/regulator/db8500-prcmu.h
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * License Terms: GNU General Public License v2
- *
- * Author: Bengt Jonsson <bengt.g.jonsson@stericsson.com> for ST-Ericsson
- *
- * Interface to power domain regulators on DB8500
- */
-
-#ifndef __REGULATOR_H__
-#define __REGULATOR_H__
-
-/* Number of DB8500 regulators and regulator enumeration */
-enum db8500_regulator_id {
-	DB8500_REGULATOR_VAPE,
-	DB8500_REGULATOR_VARM,
-	DB8500_REGULATOR_VMODEM,
-	DB8500_REGULATOR_VPLL,
-	DB8500_REGULATOR_VSMPS1,
-	DB8500_REGULATOR_VSMPS2,
-	DB8500_REGULATOR_VSMPS3,
-	DB8500_REGULATOR_VRF1,
-	DB8500_REGULATOR_SWITCH_SVAMMDSP,
-	DB8500_REGULATOR_SWITCH_SVAMMDSPRET,
-	DB8500_REGULATOR_SWITCH_SVAPIPE,
-	DB8500_REGULATOR_SWITCH_SIAMMDSP,
-	DB8500_REGULATOR_SWITCH_SIAMMDSPRET,
-	DB8500_REGULATOR_SWITCH_SIAPIPE,
-	DB8500_REGULATOR_SWITCH_SGA,
-	DB8500_REGULATOR_SWITCH_B2R2_MCDE,
-	DB8500_REGULATOR_SWITCH_ESRAM12,
-	DB8500_REGULATOR_SWITCH_ESRAM12RET,
-	DB8500_REGULATOR_SWITCH_ESRAM34,
-	DB8500_REGULATOR_SWITCH_ESRAM34RET,
-	DB8500_NUM_REGULATORS
-};
-
-/*
- * Exported interface for CPUIdle only. This function is called with all
- * interrupts turned off.
- */
-int power_state_active_is_enabled(void);
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/regulator/driver.h b/ANDROID_3.4.5/include/linux/regulator/driver.h
deleted file mode 100644
index fa8b55b8..00000000
--- a/ANDROID_3.4.5/include/linux/regulator/driver.h
+++ /dev/null
@@ -1,229 +0,0 @@
-/*
- * driver.h -- SoC Regulator driver support.
- *
- * Copyright (C) 2007, 2008 Wolfson Microelectronics PLC.
- *
- * Author: Liam Girdwood <lrg@slimlogic.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Regulator Driver Interface.
- */
-
-#ifndef __LINUX_REGULATOR_DRIVER_H_
-#define __LINUX_REGULATOR_DRIVER_H_
-
-#include <linux/device.h>
-#include <linux/notifier.h>
-#include <linux/regulator/consumer.h>
-
-struct regulator_dev;
-struct regulator_init_data;
-
-enum regulator_status {
-	REGULATOR_STATUS_OFF,
-	REGULATOR_STATUS_ON,
-	REGULATOR_STATUS_ERROR,
-	/* fast/normal/idle/standby are flavors of "on" */
-	REGULATOR_STATUS_FAST,
-	REGULATOR_STATUS_NORMAL,
-	REGULATOR_STATUS_IDLE,
-	REGULATOR_STATUS_STANDBY,
-};
-
-/**
- * struct regulator_ops - regulator operations.
- *
- * @enable: Configure the regulator as enabled.
- * @disable: Configure the regulator as disabled.
- * @is_enabled: Return 1 if the regulator is enabled, 0 if not.
- *		May also return negative errno.
- *
- * @set_voltage: Set the voltage for the regulator within the range specified.
- *               The driver should select the voltage closest to min_uV.
- * @set_voltage_sel: Set the voltage for the regulator using the specified
- *                   selector.
- * @get_voltage: Return the currently configured voltage for the regulator.
- * @get_voltage_sel: Return the currently configured voltage selector for the
- *                   regulator.
- * @list_voltage: Return one of the supported voltages, in microvolts; zero
- *	if the selector indicates a voltage that is unusable on this system;
- *	or negative errno.  Selectors range from zero to one less than
- *	regulator_desc.n_voltages.  Voltages may be reported in any order.
- *
- * @set_current_limit: Configure a limit for a current-limited regulator.
- * @get_current_limit: Get the configured limit for a current-limited regulator.
- *
- * @set_mode: Set the configured operating mode for the regulator.
- * @get_mode: Get the configured operating mode for the regulator.
- * @get_status: Return actual (not as-configured) status of regulator, as a
- *	REGULATOR_STATUS value (or negative errno)
- * @get_optimum_mode: Get the most efficient operating mode for the regulator
- *                    when running with the specified parameters.
- *
- * @enable_time: Time taken for the regulator voltage output voltage to
- *               stabilise after being enabled, in microseconds.
- * @set_voltage_time_sel: Time taken for the regulator voltage output voltage
- *               to stabilise after being set to a new value, in microseconds.
- *               The function provides the from and to voltage selector, the
- *               function should return the worst case.
- *
- * @set_suspend_voltage: Set the voltage for the regulator when the system
- *                       is suspended.
- * @set_suspend_enable: Mark the regulator as enabled when the system is
- *                      suspended.
- * @set_suspend_disable: Mark the regulator as disabled when the system is
- *                       suspended.
- * @set_suspend_mode: Set the operating mode for the regulator when the
- *                    system is suspended.
- *
- * This struct describes regulator operations which can be implemented by
- * regulator chip drivers.
- */
-struct regulator_ops {
-
-	/* enumerate supported voltages */
-	int (*list_voltage) (struct regulator_dev *, unsigned selector);
-
-	/* get/set regulator voltage */
-	int (*set_voltage) (struct regulator_dev *, int min_uV, int max_uV,
-			    unsigned *selector);
-	int (*set_voltage_sel) (struct regulator_dev *, unsigned selector);
-	int (*get_voltage) (struct regulator_dev *);
-	int (*get_voltage_sel) (struct regulator_dev *);
-
-	/* get/set regulator current  */
-	int (*set_current_limit) (struct regulator_dev *,
-				 int min_uA, int max_uA);
-	int (*get_current_limit) (struct regulator_dev *);
-
-	/* enable/disable regulator */
-	int (*enable) (struct regulator_dev *);
-	int (*disable) (struct regulator_dev *);
-	int (*is_enabled) (struct regulator_dev *);
-
-	/* get/set regulator operating mode (defined in consumer.h) */
-	int (*set_mode) (struct regulator_dev *, unsigned int mode);
-	unsigned int (*get_mode) (struct regulator_dev *);
-
-	/* Time taken to enable or set voltage on the regulator */
-	int (*enable_time) (struct regulator_dev *);
-	int (*set_voltage_time_sel) (struct regulator_dev *,
-				     unsigned int old_selector,
-				     unsigned int new_selector);
-
-	/* report regulator status ... most other accessors report
-	 * control inputs, this reports results of combining inputs
-	 * from Linux (and other sources) with the actual load.
-	 * returns REGULATOR_STATUS_* or negative errno.
-	 */
-	int (*get_status)(struct regulator_dev *);
-
-	/* get most efficient regulator operating mode for load */
-	unsigned int (*get_optimum_mode) (struct regulator_dev *, int input_uV,
-					  int output_uV, int load_uA);
-
-	/* the operations below are for configuration of regulator state when
-	 * its parent PMIC enters a global STANDBY/HIBERNATE state */
-
-	/* set regulator suspend voltage */
-	int (*set_suspend_voltage) (struct regulator_dev *, int uV);
-
-	/* enable/disable regulator in suspend state */
-	int (*set_suspend_enable) (struct regulator_dev *);
-	int (*set_suspend_disable) (struct regulator_dev *);
-
-	/* set regulator suspend operating mode (defined in consumer.h) */
-	int (*set_suspend_mode) (struct regulator_dev *, unsigned int mode);
-};
-
-/*
- * Regulators can either control voltage or current.
- */
-enum regulator_type {
-	REGULATOR_VOLTAGE,
-	REGULATOR_CURRENT,
-};
-
-/**
- * struct regulator_desc - Regulator descriptor
- *
- * Each regulator registered with the core is described with a structure of
- * this type.
- *
- * @name: Identifying name for the regulator.
- * @supply_name: Identifying the regulator supply
- * @id: Numerical identifier for the regulator.
- * @n_voltages: Number of selectors available for ops.list_voltage().
- * @ops: Regulator operations table.
- * @irq: Interrupt number for the regulator.
- * @type: Indicates if the regulator is a voltage or current regulator.
- * @owner: Module providing the regulator, used for refcounting.
- */
-struct regulator_desc {
-	const char *name;
-	const char *supply_name;
-	int id;
-	unsigned n_voltages;
-	struct regulator_ops *ops;
-	int irq;
-	enum regulator_type type;
-	struct module *owner;
-};
-
-/*
- * struct regulator_dev
- *
- * Voltage / Current regulator class device. One for each
- * regulator.
- *
- * This should *not* be used directly by anything except the regulator
- * core and notification injection (which should take the mutex and do
- * no other direct access).
- */
-struct regulator_dev {
-	struct regulator_desc *desc;
-	int exclusive;
-	u32 use_count;
-	u32 open_count;
-
-	/* lists we belong to */
-	struct list_head list; /* list of all regulators */
-
-	/* lists we own */
-	struct list_head consumer_list; /* consumers we supply */
-
-	struct blocking_notifier_head notifier;
-	struct mutex mutex; /* consumer lock */
-	struct module *owner;
-	struct device dev;
-	struct regulation_constraints *constraints;
-	struct regulator *supply;	/* for tree */
-
-	struct delayed_work disable_work;
-	int deferred_disables;
-
-	void *reg_data;		/* regulator_dev data */
-
-	struct dentry *debugfs;
-};
-
-struct regulator_dev *regulator_register(struct regulator_desc *regulator_desc,
-	struct device *dev, const struct regulator_init_data *init_data,
-	void *driver_data, struct device_node *of_node);
-void regulator_unregister(struct regulator_dev *rdev);
-
-int regulator_notifier_call_chain(struct regulator_dev *rdev,
-				  unsigned long event, void *data);
-
-void *rdev_get_drvdata(struct regulator_dev *rdev);
-struct device *rdev_get_dev(struct regulator_dev *rdev);
-int rdev_get_id(struct regulator_dev *rdev);
-
-int regulator_mode_to_status(unsigned int);
-
-void *regulator_get_init_drvdata(struct regulator_init_data *reg_init_data);
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/regulator/fixed.h b/ANDROID_3.4.5/include/linux/regulator/fixed.h
deleted file mode 100644
index 936a7d8c..00000000
--- a/ANDROID_3.4.5/include/linux/regulator/fixed.h
+++ /dev/null
@@ -1,64 +0,0 @@
-/*
- * fixed.h
- *
- * Copyright 2008 Wolfson Microelectronics PLC.
- *
- * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
- *
- * Copyright (c) 2009 Nokia Corporation
- * Roger Quadros <ext-roger.quadros@nokia.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- */
-
-#ifndef __REGULATOR_FIXED_H
-#define __REGULATOR_FIXED_H
-
-struct regulator_init_data;
-
-/**
- * struct fixed_voltage_config - fixed_voltage_config structure
- * @supply_name:	Name of the regulator supply
- * @microvolts:		Output voltage of regulator
- * @gpio:		GPIO to use for enable control
- * 			set to -EINVAL if not used
- * @startup_delay:	Start-up time in microseconds
- * @enable_high:	Polarity of enable GPIO
- *			1 = Active high, 0 = Active low
- * @enabled_at_boot:	Whether regulator has been enabled at
- * 			boot or not. 1 = Yes, 0 = No
- * 			This is used to keep the regulator at
- * 			the default state
- * @init_data:		regulator_init_data
- *
- * This structure contains fixed voltage regulator configuration
- * information that must be passed by platform code to the fixed
- * voltage regulator driver.
- */
-struct fixed_voltage_config {
-	const char *supply_name;
-	int microvolts;
-	int gpio;
-	unsigned startup_delay;
-	unsigned enable_high:1;
-	unsigned enabled_at_boot:1;
-	struct regulator_init_data *init_data;
-};
-
-struct regulator_consumer_supply;
-
-#if IS_ENABLED(CONFIG_REGULATOR)
-struct platform_device *regulator_register_fixed(int id,
-		struct regulator_consumer_supply *supplies, int num_supplies);
-#else
-static inline struct platform_device *regulator_register_fixed(int id,
-		struct regulator_consumer_supply *supplies, int num_supplies)
-{
-	return NULL;
-}
-#endif
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/regulator/gpio-regulator.h b/ANDROID_3.4.5/include/linux/regulator/gpio-regulator.h
deleted file mode 100644
index 19fbd267..00000000
--- a/ANDROID_3.4.5/include/linux/regulator/gpio-regulator.h
+++ /dev/null
@@ -1,87 +0,0 @@
-/*
- * gpio-regulator.h
- *
- * Copyright 2011 Heiko Stuebner <heiko@sntech.de>
- *
- * based on fixed.h
- *
- * Copyright 2008 Wolfson Microelectronics PLC.
- *
- * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
- *
- * Copyright (c) 2009 Nokia Corporation
- * Roger Quadros <ext-roger.quadros@nokia.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- */
-
-#ifndef __REGULATOR_GPIO_H
-#define __REGULATOR_GPIO_H
-
-struct regulator_init_data;
-
-enum regulator_type;
-
-/**
- * struct gpio_regulator_state - state description
- * @value:		microvolts or microamps
- * @gpios:		bitfield of gpio target-states for the value
- *
- * This structure describes a supported setting of the regulator
- * and the necessary gpio-state to achieve it.
- *
- * The n-th bit in the bitfield describes the state of the n-th GPIO
- * from the gpios-array defined in gpio_regulator_config below.
- */
-struct gpio_regulator_state {
-	int value;
-	int gpios;
-};
-
-/**
- * struct gpio_regulator_config - config structure
- * @supply_name:	Name of the regulator supply
- * @enable_gpio:	GPIO to use for enable control
- *			set to -EINVAL if not used
- * @enable_high:	Polarity of enable GPIO
- *			1 = Active high, 0 = Active low
- * @enabled_at_boot:	Whether regulator has been enabled at
- *			boot or not. 1 = Yes, 0 = No
- *			This is used to keep the regulator at
- *			the default state
- * @startup_delay:	Start-up time in microseconds
- * @gpios:		Array containing the gpios needed to control
- *			the setting of the regulator
- * @nr_gpios:		Number of gpios
- * @states:		Array of gpio_regulator_state entries describing
- *			the gpio state for specific voltages
- * @nr_states:		Number of states available
- * @regulator_type:	either REGULATOR_CURRENT or REGULATOR_VOLTAGE
- * @init_data:		regulator_init_data
- *
- * This structure contains gpio-voltage regulator configuration
- * information that must be passed by platform code to the
- * gpio-voltage regulator driver.
- */
-struct gpio_regulator_config {
-	const char *supply_name;
-
-	int enable_gpio;
-	unsigned enable_high:1;
-	unsigned enabled_at_boot:1;
-	unsigned startup_delay;
-
-	struct gpio *gpios;
-	int nr_gpios;
-
-	struct gpio_regulator_state *states;
-	int nr_states;
-
-	enum regulator_type type;
-	struct regulator_init_data *init_data;
-};
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/regulator/lp3971.h b/ANDROID_3.4.5/include/linux/regulator/lp3971.h
deleted file mode 100644
index 61401649..00000000
--- a/ANDROID_3.4.5/include/linux/regulator/lp3971.h
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
- * National Semiconductors LP3971 PMIC chip client interface
- *
- *  Copyright (C) 2009 Samsung Electronics
- *  Author: Marek Szyprowski <m.szyprowski@samsung.com>
- *
- * Based on wm8400.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __LINUX_REGULATOR_LP3971_H
-#define __LINUX_REGULATOR_LP3971_H
-
-#include <linux/regulator/machine.h>
-
-#define LP3971_LDO1  0
-#define LP3971_LDO2  1
-#define LP3971_LDO3  2
-#define LP3971_LDO4  3
-#define LP3971_LDO5  4
-
-#define LP3971_DCDC1 5
-#define LP3971_DCDC2 6
-#define LP3971_DCDC3 7
-
-#define LP3971_NUM_REGULATORS 8
-
-struct lp3971_regulator_subdev {
-	int id;
-	struct regulator_init_data *initdata;
-};
-
-struct lp3971_platform_data {
-	int num_regulators;
-	struct lp3971_regulator_subdev *regulators;
-};
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/regulator/lp3972.h b/ANDROID_3.4.5/include/linux/regulator/lp3972.h
deleted file mode 100644
index 9bb7389b..00000000
--- a/ANDROID_3.4.5/include/linux/regulator/lp3972.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * National Semiconductors LP3972 PMIC chip client interface
- *
- * Based on lp3971.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __LINUX_REGULATOR_LP3972_H
-#define __LINUX_REGULATOR_LP3972_H
-
-#include <linux/regulator/machine.h>
-
-#define LP3972_LDO1  0
-#define LP3972_LDO2  1
-#define LP3972_LDO3  2
-#define LP3972_LDO4  3
-#define LP3972_LDO5  4
-
-#define LP3972_DCDC1 5
-#define LP3972_DCDC2 6
-#define LP3972_DCDC3 7
-
-#define LP3972_NUM_REGULATORS 8
-
-struct lp3972_regulator_subdev {
-	int id;
-	struct regulator_init_data *initdata;
-};
-
-struct lp3972_platform_data {
-	int num_regulators;
-	struct lp3972_regulator_subdev *regulators;
-};
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/regulator/machine.h b/ANDROID_3.4.5/include/linux/regulator/machine.h
deleted file mode 100644
index b0210844..00000000
--- a/ANDROID_3.4.5/include/linux/regulator/machine.h
+++ /dev/null
@@ -1,201 +0,0 @@
-/*
- * machine.h -- SoC Regulator support, machine/board driver API.
- *
- * Copyright (C) 2007, 2008 Wolfson Microelectronics PLC.
- *
- * Author: Liam Girdwood <lrg@slimlogic.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Regulator Machine/Board Interface.
- */
-
-#ifndef __LINUX_REGULATOR_MACHINE_H_
-#define __LINUX_REGULATOR_MACHINE_H_
-
-#include <linux/regulator/consumer.h>
-#include <linux/suspend.h>
-
-struct regulator;
-
-/*
- * Regulator operation constraint flags. These flags are used to enable
- * certain regulator operations and can be OR'ed together.
- *
- * VOLTAGE:  Regulator output voltage can be changed by software on this
- *           board/machine.
- * CURRENT:  Regulator output current can be changed by software on this
- *           board/machine.
- * MODE:     Regulator operating mode can be changed by software on this
- *           board/machine.
- * STATUS:   Regulator can be enabled and disabled.
- * DRMS:     Dynamic Regulator Mode Switching is enabled for this regulator.
- */
-
-#define REGULATOR_CHANGE_VOLTAGE	0x1
-#define REGULATOR_CHANGE_CURRENT	0x2
-#define REGULATOR_CHANGE_MODE		0x4
-#define REGULATOR_CHANGE_STATUS		0x8
-#define REGULATOR_CHANGE_DRMS		0x10
-
-/**
- * struct regulator_state - regulator state during low power system states
- *
- * This describes a regulators state during a system wide low power
- * state.  One of enabled or disabled must be set for the
- * configuration to be applied.
- *
- * @uV: Operating voltage during suspend.
- * @mode: Operating mode during suspend.
- * @enabled: Enabled during suspend.
- * @disabled: Disabled during suspend.
- */
-struct regulator_state {
-	int uV;	/* suspend voltage */
-	unsigned int mode; /* suspend regulator operating mode */
-	int enabled; /* is regulator enabled in this suspend state */
-	int disabled; /* is the regulator disbled in this suspend state */
-};
-
-/**
- * struct regulation_constraints - regulator operating constraints.
- *
- * This struct describes regulator and board/machine specific constraints.
- *
- * @name: Descriptive name for the constraints, used for display purposes.
- *
- * @min_uV: Smallest voltage consumers may set.
- * @max_uV: Largest voltage consumers may set.
- * @uV_offset: Offset applied to voltages from consumer to compensate for
- *             voltage drops.
- *
- * @min_uA: Smallest current consumers may set.
- * @max_uA: Largest current consumers may set.
- *
- * @valid_modes_mask: Mask of modes which may be configured by consumers.
- * @valid_ops_mask: Operations which may be performed by consumers.
- *
- * @always_on: Set if the regulator should never be disabled.
- * @boot_on: Set if the regulator is enabled when the system is initially
- *           started.  If the regulator is not enabled by the hardware or
- *           bootloader then it will be enabled when the constraints are
- *           applied.
- * @apply_uV: Apply the voltage constraint when initialising.
- *
- * @input_uV: Input voltage for regulator when supplied by another regulator.
- *
- * @state_disk: State for regulator when system is suspended in disk mode.
- * @state_mem: State for regulator when system is suspended in mem mode.
- * @state_standby: State for regulator when system is suspended in standby
- *                 mode.
- * @initial_state: Suspend state to set by default.
- * @initial_mode: Mode to set at startup.
- */
-struct regulation_constraints {
-
-	const char *name;
-
-	/* voltage output range (inclusive) - for voltage control */
-	int min_uV;
-	int max_uV;
-
-	int uV_offset;
-
-	/* current output range (inclusive) - for current control */
-	int min_uA;
-	int max_uA;
-
-	/* valid regulator operating modes for this machine */
-	unsigned int valid_modes_mask;
-
-	/* valid operations for regulator on this machine */
-	unsigned int valid_ops_mask;
-
-	/* regulator input voltage - only if supply is another regulator */
-	int input_uV;
-
-	/* regulator suspend states for global PMIC STANDBY/HIBERNATE */
-	struct regulator_state state_disk;
-	struct regulator_state state_mem;
-	struct regulator_state state_standby;
-	suspend_state_t initial_state; /* suspend state to set at init */
-
-	/* mode to set on startup */
-	unsigned int initial_mode;
-
-	/* constraint flags */
-	unsigned always_on:1;	/* regulator never off when system is on */
-	unsigned boot_on:1;	/* bootloader/firmware enabled regulator */
-	unsigned apply_uV:1;	/* apply uV constraint if min == max */
-};
-
-/**
- * struct regulator_consumer_supply - supply -> device mapping
- *
- * This maps a supply name to a device. Use of dev_name allows support for
- * buses which make struct device available late such as I2C.
- *
- * @dev_name: Result of dev_name() for the consumer.
- * @supply: Name for the supply.
- */
-struct regulator_consumer_supply {
-	const char *dev_name;   /* dev_name() for consumer */
-	const char *supply;	/* consumer supply - e.g. "vcc" */
-};
-
-/* Initialize struct regulator_consumer_supply */
-#define REGULATOR_SUPPLY(_name, _dev_name)			\
-{								\
-	.supply		= _name,				\
-	.dev_name	= _dev_name,				\
-}
-
-/**
- * struct regulator_init_data - regulator platform initialisation data.
- *
- * Initialisation constraints, our supply and consumers supplies.
- *
- * @supply_regulator: Parent regulator.  Specified using the regulator name
- *                    as it appears in the name field in sysfs, which can
- *                    be explicitly set using the constraints field 'name'.
- *
- * @constraints: Constraints.  These must be specified for the regulator to
- *               be usable.
- * @num_consumer_supplies: Number of consumer device supplies.
- * @consumer_supplies: Consumer device supply configuration.
- *
- * @regulator_init: Callback invoked when the regulator has been registered.
- * @driver_data: Data passed to regulator_init.
- */
-struct regulator_init_data {
-	const char *supply_regulator;        /* or NULL for system supply */
-
-	struct regulation_constraints constraints;
-
-	int num_consumer_supplies;
-	struct regulator_consumer_supply *consumer_supplies;
-
-	/* optional regulator machine specific init */
-	int (*regulator_init)(void *driver_data);
-	void *driver_data;	/* core does not touch this */
-};
-
-int regulator_suspend_prepare(suspend_state_t state);
-int regulator_suspend_finish(void);
-
-#ifdef CONFIG_REGULATOR
-void regulator_has_full_constraints(void);
-void regulator_use_dummy_regulator(void);
-#else
-static inline void regulator_has_full_constraints(void)
-{
-}
-
-static inline void regulator_use_dummy_regulator(void)
-{
-}
-#endif
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/regulator/max1586.h b/ANDROID_3.4.5/include/linux/regulator/max1586.h
deleted file mode 100644
index de9a7fae..00000000
--- a/ANDROID_3.4.5/include/linux/regulator/max1586.h
+++ /dev/null
@@ -1,63 +0,0 @@
-/*
- * max1586.h  --  Voltage regulation for the Maxim 1586
- *
- * Copyright (C) 2008 Robert Jarzmik
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef REGULATOR_MAX1586
-#define REGULATOR_MAX1586
-
-#include <linux/regulator/machine.h>
-
-#define MAX1586_V3 0
-#define MAX1586_V6 1
-
-/* precalculated values for v3_gain */
-#define MAX1586_GAIN_NO_R24   1000000  /* 700000 .. 1475000 mV */
-#define MAX1586_GAIN_R24_3k32 1051098  /* 735768 .. 1550369 mV */
-#define MAX1586_GAIN_R24_5k11 1078648  /* 755053 .. 1591005 mV */
-#define MAX1586_GAIN_R24_7k5  1115432  /* 780802 .. 1645262 mV */
-
-/**
- * max1586_subdev_data - regulator data
- * @id: regulator Id (either MAX1586_V3 or MAX1586_V6)
- * @name: regulator cute name (example for V3: "vcc_core")
- * @platform_data: regulator init data (constraints, supplies, ...)
- */
-struct max1586_subdev_data {
-	int				id;
-	char				*name;
-	struct regulator_init_data	*platform_data;
-};
-
-/**
- * max1586_platform_data - platform data for max1586
- * @num_subdevs: number of regulators used (may be 1 or 2)
- * @subdevs: regulator used
- *           At most, there will be a regulator for V3 and one for V6 voltages.
- * @v3_gain: gain on the V3 voltage output multiplied by 1e6.
- *           This can be calculated as ((1 + R24/R25 + R24/185.5kOhm) * 1e6)
- *           for an external resistor configuration as described in the
- *           data sheet (R25=100kOhm).
- */
-struct max1586_platform_data {
-	int num_subdevs;
-	struct max1586_subdev_data *subdevs;
-	int v3_gain;
-};
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/regulator/max8649.h b/ANDROID_3.4.5/include/linux/regulator/max8649.h
deleted file mode 100644
index 417d14ec..00000000
--- a/ANDROID_3.4.5/include/linux/regulator/max8649.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- * Interface of Maxim max8649
- *
- * Copyright (C) 2009-2010 Marvell International Ltd.
- *      Haojian Zhuang <haojian.zhuang@marvell.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __LINUX_REGULATOR_MAX8649_H
-#define	__LINUX_REGULATOR_MAX8649_H
-
-#include <linux/regulator/machine.h>
-
-enum {
-	MAX8649_EXTCLK_26MHZ = 0,
-	MAX8649_EXTCLK_13MHZ,
-	MAX8649_EXTCLK_19MHZ,	/* 19.2MHz */
-};
-
-enum {
-	MAX8649_RAMP_32MV = 0,
-	MAX8649_RAMP_16MV,
-	MAX8649_RAMP_8MV,
-	MAX8649_RAMP_4MV,
-	MAX8649_RAMP_2MV,
-	MAX8649_RAMP_1MV,
-	MAX8649_RAMP_0_5MV,
-	MAX8649_RAMP_0_25MV,
-};
-
-struct max8649_platform_data {
-	struct regulator_init_data *regulator;
-
-	unsigned	mode:2;		/* bit[1:0] = VID1,VID0 */
-	unsigned	extclk_freq:2;
-	unsigned	extclk:1;
-	unsigned	ramp_timing:3;
-	unsigned	ramp_down:1;
-};
-
-#endif	/* __LINUX_REGULATOR_MAX8649_H */
diff --git a/ANDROID_3.4.5/include/linux/regulator/max8660.h b/ANDROID_3.4.5/include/linux/regulator/max8660.h
deleted file mode 100644
index 99367636..00000000
--- a/ANDROID_3.4.5/include/linux/regulator/max8660.h
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- * max8660.h  --  Voltage regulation for the Maxim 8660/8661
- *
- * Copyright (C) 2009 Wolfram Sang, Pengutronix e.K.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __LINUX_REGULATOR_MAX8660_H
-#define __LINUX_REGULATOR_MAX8660_H
-
-#include <linux/regulator/machine.h>
-
-enum {
-	MAX8660_V3,
-	MAX8660_V4,
-	MAX8660_V5,
-	MAX8660_V6,
-	MAX8660_V7,
-	MAX8660_V_END,
-};
-
-/**
- * max8660_subdev_data - regulator subdev data
- * @id: regulator id
- * @name: regulator name
- * @platform_data: regulator init data
- */
-struct max8660_subdev_data {
-	int				id;
-	char				*name;
-	struct regulator_init_data	*platform_data;
-};
-
-/**
- * max8660_platform_data - platform data for max8660
- * @num_subdevs: number of regulators used
- * @subdevs: pointer to regulators used
- * @en34_is_high: if EN34 is driven high, regulators cannot be en-/disabled.
- */
-struct max8660_platform_data {
-	int num_subdevs;
-	struct max8660_subdev_data *subdevs;
-	unsigned en34_is_high:1;
-};
-#endif
diff --git a/ANDROID_3.4.5/include/linux/regulator/max8952.h b/ANDROID_3.4.5/include/linux/regulator/max8952.h
deleted file mode 100644
index 45e42855..00000000
--- a/ANDROID_3.4.5/include/linux/regulator/max8952.h
+++ /dev/null
@@ -1,135 +0,0 @@
-/*
- * max8952.h - Voltage regulation for the Maxim 8952
- *
- *  Copyright (C) 2010 Samsung Electrnoics
- *  MyungJoo Ham <myungjoo.ham@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef REGULATOR_MAX8952
-#define REGULATOR_MAX8952
-
-#include <linux/regulator/machine.h>
-
-enum {
-	MAX8952_DVS_MODE0,
-	MAX8952_DVS_MODE1,
-	MAX8952_DVS_MODE2,
-	MAX8952_DVS_MODE3,
-};
-
-enum {
-	MAX8952_DVS_770mV = 0,
-	MAX8952_DVS_780mV,
-	MAX8952_DVS_790mV,
-	MAX8952_DVS_800mV,
-	MAX8952_DVS_810mV,
-	MAX8952_DVS_820mV,
-	MAX8952_DVS_830mV,
-	MAX8952_DVS_840mV,
-	MAX8952_DVS_850mV,
-	MAX8952_DVS_860mV,
-	MAX8952_DVS_870mV,
-	MAX8952_DVS_880mV,
-	MAX8952_DVS_890mV,
-	MAX8952_DVS_900mV,
-	MAX8952_DVS_910mV,
-	MAX8952_DVS_920mV,
-	MAX8952_DVS_930mV,
-	MAX8952_DVS_940mV,
-	MAX8952_DVS_950mV,
-	MAX8952_DVS_960mV,
-	MAX8952_DVS_970mV,
-	MAX8952_DVS_980mV,
-	MAX8952_DVS_990mV,
-	MAX8952_DVS_1000mV,
-	MAX8952_DVS_1010mV,
-	MAX8952_DVS_1020mV,
-	MAX8952_DVS_1030mV,
-	MAX8952_DVS_1040mV,
-	MAX8952_DVS_1050mV,
-	MAX8952_DVS_1060mV,
-	MAX8952_DVS_1070mV,
-	MAX8952_DVS_1080mV,
-	MAX8952_DVS_1090mV,
-	MAX8952_DVS_1100mV,
-	MAX8952_DVS_1110mV,
-	MAX8952_DVS_1120mV,
-	MAX8952_DVS_1130mV,
-	MAX8952_DVS_1140mV,
-	MAX8952_DVS_1150mV,
-	MAX8952_DVS_1160mV,
-	MAX8952_DVS_1170mV,
-	MAX8952_DVS_1180mV,
-	MAX8952_DVS_1190mV,
-	MAX8952_DVS_1200mV,
-	MAX8952_DVS_1210mV,
-	MAX8952_DVS_1220mV,
-	MAX8952_DVS_1230mV,
-	MAX8952_DVS_1240mV,
-	MAX8952_DVS_1250mV,
-	MAX8952_DVS_1260mV,
-	MAX8952_DVS_1270mV,
-	MAX8952_DVS_1280mV,
-	MAX8952_DVS_1290mV,
-	MAX8952_DVS_1300mV,
-	MAX8952_DVS_1310mV,
-	MAX8952_DVS_1320mV,
-	MAX8952_DVS_1330mV,
-	MAX8952_DVS_1340mV,
-	MAX8952_DVS_1350mV,
-	MAX8952_DVS_1360mV,
-	MAX8952_DVS_1370mV,
-	MAX8952_DVS_1380mV,
-	MAX8952_DVS_1390mV,
-	MAX8952_DVS_1400mV,
-};
-
-enum {
-	MAX8952_SYNC_FREQ_26MHZ, /* Default */
-	MAX8952_SYNC_FREQ_13MHZ,
-	MAX8952_SYNC_FREQ_19_2MHZ,
-};
-
-enum {
-	MAX8952_RAMP_32mV_us = 0, /* Default */
-	MAX8952_RAMP_16mV_us,
-	MAX8952_RAMP_8mV_us,
-	MAX8952_RAMP_4mV_us,
-	MAX8952_RAMP_2mV_us,
-	MAX8952_RAMP_1mV_us,
-	MAX8952_RAMP_0_5mV_us,
-	MAX8952_RAMP_0_25mV_us,
-};
-
-#define MAX8952_NUM_DVS_MODE	4
-
-struct max8952_platform_data {
-	int gpio_vid0;
-	int gpio_vid1;
-	int gpio_en;
-
-	u8 default_mode;
-	u8 dvs_mode[MAX8952_NUM_DVS_MODE]; /* MAX8952_DVS_MODEx_XXXXmV */
-
-	u8 sync_freq;
-	u8 ramp_speed;
-
-	struct regulator_init_data reg_data;
-};
-
-
-#endif /* REGULATOR_MAX8952 */
diff --git a/ANDROID_3.4.5/include/linux/regulator/of_regulator.h b/ANDROID_3.4.5/include/linux/regulator/of_regulator.h
deleted file mode 100644
index 769704f2..00000000
--- a/ANDROID_3.4.5/include/linux/regulator/of_regulator.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * OpenFirmware regulator support routines
- *
- */
-
-#ifndef __LINUX_OF_REG_H
-#define __LINUX_OF_REG_H
-
-#if defined(CONFIG_OF)
-extern struct regulator_init_data
-	*of_get_regulator_init_data(struct device *dev,
-				    struct device_node *node);
-#else
-static inline struct regulator_init_data
-	*of_get_regulator_init_data(struct device *dev,
-				    struct device_node *node)
-{
-	return NULL;
-}
-#endif /* CONFIG_OF */
-
-#endif /* __LINUX_OF_REG_H */
diff --git a/ANDROID_3.4.5/include/linux/regulator/tps62360.h b/ANDROID_3.4.5/include/linux/regulator/tps62360.h
deleted file mode 100644
index 6a5c1b2c..00000000
--- a/ANDROID_3.4.5/include/linux/regulator/tps62360.h
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- * tps62360.h -- TI tps62360
- *
- * Interface for regulator driver for TI TPS62360 Processor core supply
- *
- * Copyright (C) 2012 NVIDIA Corporation
-
- * Author: Laxman Dewangan <ldewangan@nvidia.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA	02110-1301, USA.
- *
- */
-
-#ifndef __LINUX_REGULATOR_TPS62360_H
-#define __LINUX_REGULATOR_TPS62360_H
-
-#include <linux/regulator/machine.h>
-
-/*
- * struct tps62360_regulator_platform_data - tps62360 regulator platform data.
- *
- * @reg_init_data: The regulator init data.
- * @en_force_pwm: Enable force pwm or not.
- * @en_discharge: Enable discharge the output capacitor via internal
- *                register.
- * @en_internal_pulldn: internal pull down enable or not.
- * @vsel0_gpio: Gpio number for vsel0. It should be -1 if this is tied with
- *              fixed logic.
- * @vsel1_gpio: Gpio number for vsel1. It should be -1 if this is tied with
- *              fixed logic.
- * @vsel0_def_state: Default state of vsel0. 1 if it is high else 0.
- * @vsel1_def_state: Default state of vsel1. 1 if it is high else 0.
- */
-struct tps62360_regulator_platform_data {
-	struct regulator_init_data reg_init_data;
-	bool en_force_pwm;
-	bool en_discharge;
-	bool en_internal_pulldn;
-	int vsel0_gpio;
-	int vsel1_gpio;
-	int vsel0_def_state;
-	int vsel1_def_state;
-};
-
-#endif /* __LINUX_REGULATOR_TPS62360_H */
diff --git a/ANDROID_3.4.5/include/linux/regulator/tps6507x.h b/ANDROID_3.4.5/include/linux/regulator/tps6507x.h
deleted file mode 100644
index 4892f591..00000000
--- a/ANDROID_3.4.5/include/linux/regulator/tps6507x.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * tps6507x.h  --  Voltage regulation for the Texas Instruments TPS6507X
- *
- * Copyright (C) 2010 Texas Instruments, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
- */
-
-#ifndef REGULATOR_TPS6507X
-#define REGULATOR_TPS6507X
-
-/**
- * tps6507x_reg_platform_data - platform data for tps6507x
- * @defdcdc_default: Defines whether DCDC high or the low register controls
- *	output voltage by default. Valid for DCDC2 and DCDC3 outputs only.
- */
-struct tps6507x_reg_platform_data {
-	bool defdcdc_default;
-};
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/regulator/userspace-consumer.h b/ANDROID_3.4.5/include/linux/regulator/userspace-consumer.h
deleted file mode 100644
index b4554ce9..00000000
--- a/ANDROID_3.4.5/include/linux/regulator/userspace-consumer.h
+++ /dev/null
@@ -1,25 +0,0 @@
-#ifndef __REGULATOR_PLATFORM_CONSUMER_H_
-#define __REGULATOR_PLATFORM_CONSUMER_H_
-
-struct regulator_consumer_supply;
-
-/**
- * struct regulator_userspace_consumer_data - line consumer
- * initialisation data.
- *
- * @name: Name for the consumer line
- * @num_supplies: Number of supplies feeding the line
- * @supplies: Supplies configuration.
- * @init_on: Set if the regulators supplying the line should be
- *           enabled during initialisation
- */
-struct regulator_userspace_consumer_data {
-	const char *name;
-
-	int num_supplies;
-	struct regulator_bulk_data *supplies;
-
-	bool init_on;
-};
-
-#endif /* __REGULATOR_PLATFORM_CONSUMER_H_ */
diff --git a/ANDROID_3.4.5/include/linux/reiserfs_fs.h b/ANDROID_3.4.5/include/linux/reiserfs_fs.h
deleted file mode 100644
index ea3700cd..00000000
--- a/ANDROID_3.4.5/include/linux/reiserfs_fs.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * Copyright 1996, 1997, 1998 Hans Reiser, see reiserfs/README for licensing and copyright details
- */
-#ifndef _LINUX_REISER_FS_H
-#define _LINUX_REISER_FS_H
-
-#include <linux/types.h>
-#include <linux/magic.h>
-
-/*
- *  include/linux/reiser_fs.h
- *
- *  Reiser File System constants and structures
- *
- */
-
-/* ioctl's command */
-#define REISERFS_IOC_UNPACK		_IOW(0xCD,1,long)
-/* define following flags to be the same as in ext2, so that chattr(1),
-   lsattr(1) will work with us. */
-#define REISERFS_IOC_GETFLAGS		FS_IOC_GETFLAGS
-#define REISERFS_IOC_SETFLAGS		FS_IOC_SETFLAGS
-#define REISERFS_IOC_GETVERSION		FS_IOC_GETVERSION
-#define REISERFS_IOC_SETVERSION		FS_IOC_SETVERSION
-
-#endif				/* _LINUX_REISER_FS_H */
diff --git a/ANDROID_3.4.5/include/linux/reiserfs_xattr.h b/ANDROID_3.4.5/include/linux/reiserfs_xattr.h
deleted file mode 100644
index d8ce17c2..00000000
--- a/ANDROID_3.4.5/include/linux/reiserfs_xattr.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
-  File: linux/reiserfs_xattr.h
-*/
-
-#ifndef _LINUX_REISERFS_XATTR_H
-#define _LINUX_REISERFS_XATTR_H
-
-#include <linux/types.h>
-
-/* Magic value in header */
-#define REISERFS_XATTR_MAGIC 0x52465841	/* "RFXA" */
-
-struct reiserfs_xattr_header {
-	__le32 h_magic;		/* magic number for identification */
-	__le32 h_hash;		/* hash of the value */
-};
-
-struct reiserfs_security_handle {
-	char *name;
-	void *value;
-	size_t length;
-};
-
-#endif  /*  _LINUX_REISERFS_XATTR_H  */
diff --git a/ANDROID_3.4.5/include/linux/relay.h b/ANDROID_3.4.5/include/linux/relay.h
deleted file mode 100644
index 91cacc34..00000000
--- a/ANDROID_3.4.5/include/linux/relay.h
+++ /dev/null
@@ -1,292 +0,0 @@
-/*
- * linux/include/linux/relay.h
- *
- * Copyright (C) 2002, 2003 - Tom Zanussi (zanussi@us.ibm.com), IBM Corp
- * Copyright (C) 1999, 2000, 2001, 2002 - Karim Yaghmour (karim@opersys.com)
- *
- * CONFIG_RELAY definitions and declarations
- */
-
-#ifndef _LINUX_RELAY_H
-#define _LINUX_RELAY_H
-
-#include <linux/types.h>
-#include <linux/sched.h>
-#include <linux/timer.h>
-#include <linux/wait.h>
-#include <linux/list.h>
-#include <linux/bug.h>
-#include <linux/fs.h>
-#include <linux/poll.h>
-#include <linux/kref.h>
-
-/* Needs a _much_ better name... */
-#define FIX_SIZE(x) ((((x) - 1) & PAGE_MASK) + PAGE_SIZE)
-
-/*
- * Tracks changes to rchan/rchan_buf structs
- */
-#define RELAYFS_CHANNEL_VERSION		7
-
-/*
- * Per-cpu relay channel buffer
- */
-struct rchan_buf
-{
-	void *start;			/* start of channel buffer */
-	void *data;			/* start of current sub-buffer */
-	size_t offset;			/* current offset into sub-buffer */
-	size_t subbufs_produced;	/* count of sub-buffers produced */
-	size_t subbufs_consumed;	/* count of sub-buffers consumed */
-	struct rchan *chan;		/* associated channel */
-	wait_queue_head_t read_wait;	/* reader wait queue */
-	struct timer_list timer; 	/* reader wake-up timer */
-	struct dentry *dentry;		/* channel file dentry */
-	struct kref kref;		/* channel buffer refcount */
-	struct page **page_array;	/* array of current buffer pages */
-	unsigned int page_count;	/* number of current buffer pages */
-	unsigned int finalized;		/* buffer has been finalized */
-	size_t *padding;		/* padding counts per sub-buffer */
-	size_t prev_padding;		/* temporary variable */
-	size_t bytes_consumed;		/* bytes consumed in cur read subbuf */
-	size_t early_bytes;		/* bytes consumed before VFS inited */
-	unsigned int cpu;		/* this buf's cpu */
-} ____cacheline_aligned;
-
-/*
- * Relay channel data structure
- */
-struct rchan
-{
-	u32 version;			/* the version of this struct */
-	size_t subbuf_size;		/* sub-buffer size */
-	size_t n_subbufs;		/* number of sub-buffers per buffer */
-	size_t alloc_size;		/* total buffer size allocated */
-	struct rchan_callbacks *cb;	/* client callbacks */
-	struct kref kref;		/* channel refcount */
-	void *private_data;		/* for user-defined data */
-	size_t last_toobig;		/* tried to log event > subbuf size */
-	struct rchan_buf *buf[NR_CPUS]; /* per-cpu channel buffers */
-	int is_global;			/* One global buffer ? */
-	struct list_head list;		/* for channel list */
-	struct dentry *parent;		/* parent dentry passed to open */
-	int has_base_filename;		/* has a filename associated? */
-	char base_filename[NAME_MAX];	/* saved base filename */
-};
-
-/*
- * Relay channel client callbacks
- */
-struct rchan_callbacks
-{
-	/*
-	 * subbuf_start - called on buffer-switch to a new sub-buffer
-	 * @buf: the channel buffer containing the new sub-buffer
-	 * @subbuf: the start of the new sub-buffer
-	 * @prev_subbuf: the start of the previous sub-buffer
-	 * @prev_padding: unused space at the end of previous sub-buffer
-	 *
-	 * The client should return 1 to continue logging, 0 to stop
-	 * logging.
-	 *
-	 * NOTE: subbuf_start will also be invoked when the buffer is
-	 *       created, so that the first sub-buffer can be initialized
-	 *       if necessary.  In this case, prev_subbuf will be NULL.
-	 *
-	 * NOTE: the client can reserve bytes at the beginning of the new
-	 *       sub-buffer by calling subbuf_start_reserve() in this callback.
-	 */
-	int (*subbuf_start) (struct rchan_buf *buf,
-			     void *subbuf,
-			     void *prev_subbuf,
-			     size_t prev_padding);
-
-	/*
-	 * buf_mapped - relay buffer mmap notification
-	 * @buf: the channel buffer
-	 * @filp: relay file pointer
-	 *
-	 * Called when a relay file is successfully mmapped
-	 */
-        void (*buf_mapped)(struct rchan_buf *buf,
-			   struct file *filp);
-
-	/*
-	 * buf_unmapped - relay buffer unmap notification
-	 * @buf: the channel buffer
-	 * @filp: relay file pointer
-	 *
-	 * Called when a relay file is successfully unmapped
-	 */
-        void (*buf_unmapped)(struct rchan_buf *buf,
-			     struct file *filp);
-	/*
-	 * create_buf_file - create file to represent a relay channel buffer
-	 * @filename: the name of the file to create
-	 * @parent: the parent of the file to create
-	 * @mode: the mode of the file to create
-	 * @buf: the channel buffer
-	 * @is_global: outparam - set non-zero if the buffer should be global
-	 *
-	 * Called during relay_open(), once for each per-cpu buffer,
-	 * to allow the client to create a file to be used to
-	 * represent the corresponding channel buffer.  If the file is
-	 * created outside of relay, the parent must also exist in
-	 * that filesystem.
-	 *
-	 * The callback should return the dentry of the file created
-	 * to represent the relay buffer.
-	 *
-	 * Setting the is_global outparam to a non-zero value will
-	 * cause relay_open() to create a single global buffer rather
-	 * than the default set of per-cpu buffers.
-	 *
-	 * See Documentation/filesystems/relay.txt for more info.
-	 */
-	struct dentry *(*create_buf_file)(const char *filename,
-					  struct dentry *parent,
-					  umode_t mode,
-					  struct rchan_buf *buf,
-					  int *is_global);
-
-	/*
-	 * remove_buf_file - remove file representing a relay channel buffer
-	 * @dentry: the dentry of the file to remove
-	 *
-	 * Called during relay_close(), once for each per-cpu buffer,
-	 * to allow the client to remove a file used to represent a
-	 * channel buffer.
-	 *
-	 * The callback should return 0 if successful, negative if not.
-	 */
-	int (*remove_buf_file)(struct dentry *dentry);
-};
-
-/*
- * CONFIG_RELAY kernel API, kernel/relay.c
- */
-
-struct rchan *relay_open(const char *base_filename,
-			 struct dentry *parent,
-			 size_t subbuf_size,
-			 size_t n_subbufs,
-			 struct rchan_callbacks *cb,
-			 void *private_data);
-extern int relay_late_setup_files(struct rchan *chan,
-				  const char *base_filename,
-				  struct dentry *parent);
-extern void relay_close(struct rchan *chan);
-extern void relay_flush(struct rchan *chan);
-extern void relay_subbufs_consumed(struct rchan *chan,
-				   unsigned int cpu,
-				   size_t consumed);
-extern void relay_reset(struct rchan *chan);
-extern int relay_buf_full(struct rchan_buf *buf);
-
-extern size_t relay_switch_subbuf(struct rchan_buf *buf,
-				  size_t length);
-
-/**
- *	relay_write - write data into the channel
- *	@chan: relay channel
- *	@data: data to be written
- *	@length: number of bytes to write
- *
- *	Writes data into the current cpu's channel buffer.
- *
- *	Protects the buffer by disabling interrupts.  Use this
- *	if you might be logging from interrupt context.  Try
- *	__relay_write() if you know you	won't be logging from
- *	interrupt context.
- */
-static inline void relay_write(struct rchan *chan,
-			       const void *data,
-			       size_t length)
-{
-	unsigned long flags;
-	struct rchan_buf *buf;
-
-	local_irq_save(flags);
-	buf = chan->buf[smp_processor_id()];
-	if (unlikely(buf->offset + length > chan->subbuf_size))
-		length = relay_switch_subbuf(buf, length);
-	memcpy(buf->data + buf->offset, data, length);
-	buf->offset += length;
-	local_irq_restore(flags);
-}
-
-/**
- *	__relay_write - write data into the channel
- *	@chan: relay channel
- *	@data: data to be written
- *	@length: number of bytes to write
- *
- *	Writes data into the current cpu's channel buffer.
- *
- *	Protects the buffer by disabling preemption.  Use
- *	relay_write() if you might be logging from interrupt
- *	context.
- */
-static inline void __relay_write(struct rchan *chan,
-				 const void *data,
-				 size_t length)
-{
-	struct rchan_buf *buf;
-
-	buf = chan->buf[get_cpu()];
-	if (unlikely(buf->offset + length > buf->chan->subbuf_size))
-		length = relay_switch_subbuf(buf, length);
-	memcpy(buf->data + buf->offset, data, length);
-	buf->offset += length;
-	put_cpu();
-}
-
-/**
- *	relay_reserve - reserve slot in channel buffer
- *	@chan: relay channel
- *	@length: number of bytes to reserve
- *
- *	Returns pointer to reserved slot, NULL if full.
- *
- *	Reserves a slot in the current cpu's channel buffer.
- *	Does not protect the buffer at all - caller must provide
- *	appropriate synchronization.
- */
-static inline void *relay_reserve(struct rchan *chan, size_t length)
-{
-	void *reserved;
-	struct rchan_buf *buf = chan->buf[smp_processor_id()];
-
-	if (unlikely(buf->offset + length > buf->chan->subbuf_size)) {
-		length = relay_switch_subbuf(buf, length);
-		if (!length)
-			return NULL;
-	}
-	reserved = buf->data + buf->offset;
-	buf->offset += length;
-
-	return reserved;
-}
-
-/**
- *	subbuf_start_reserve - reserve bytes at the start of a sub-buffer
- *	@buf: relay channel buffer
- *	@length: number of bytes to reserve
- *
- *	Helper function used to reserve bytes at the beginning of
- *	a sub-buffer in the subbuf_start() callback.
- */
-static inline void subbuf_start_reserve(struct rchan_buf *buf,
-					size_t length)
-{
-	BUG_ON(length >= buf->chan->subbuf_size - 1);
-	buf->offset = length;
-}
-
-/*
- * exported relay file operations, kernel/relay.c
- */
-extern const struct file_operations relay_file_operations;
-
-#endif /* _LINUX_RELAY_H */
-
diff --git a/ANDROID_3.4.5/include/linux/remoteproc.h b/ANDROID_3.4.5/include/linux/remoteproc.h
deleted file mode 100644
index f1ffabb9..00000000
--- a/ANDROID_3.4.5/include/linux/remoteproc.h
+++ /dev/null
@@ -1,478 +0,0 @@
-/*
- * Remote Processor Framework
- *
- * Copyright(c) 2011 Texas Instruments, Inc.
- * Copyright(c) 2011 Google, Inc.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * * Redistributions of source code must retain the above copyright
- *   notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- *   notice, this list of conditions and the following disclaimer in
- *   the documentation and/or other materials provided with the
- *   distribution.
- * * Neither the name Texas Instruments nor the names of its
- *   contributors may be used to endorse or promote products derived
- *   from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#ifndef REMOTEPROC_H
-#define REMOTEPROC_H
-
-#include <linux/types.h>
-#include <linux/kref.h>
-#include <linux/klist.h>
-#include <linux/mutex.h>
-#include <linux/virtio.h>
-#include <linux/completion.h>
-#include <linux/idr.h>
-
-/**
- * struct resource_table - firmware resource table header
- * @ver: version number
- * @num: number of resource entries
- * @reserved: reserved (must be zero)
- * @offset: array of offsets pointing at the various resource entries
- *
- * A resource table is essentially a list of system resources required
- * by the remote processor. It may also include configuration entries.
- * If needed, the remote processor firmware should contain this table
- * as a dedicated ".resource_table" ELF section.
- *
- * Some resources entries are mere announcements, where the host is informed
- * of specific remoteproc configuration. Other entries require the host to
- * do something (e.g. allocate a system resource). Sometimes a negotiation
- * is expected, where the firmware requests a resource, and once allocated,
- * the host should provide back its details (e.g. address of an allocated
- * memory region).
- *
- * The header of the resource table, as expressed by this structure,
- * contains a version number (should we need to change this format in the
- * future), the number of available resource entries, and their offsets
- * in the table.
- *
- * Immediately following this header are the resource entries themselves,
- * each of which begins with a resource entry header (as described below).
- */
-struct resource_table {
-	u32 ver;
-	u32 num;
-	u32 reserved[2];
-	u32 offset[0];
-} __packed;
-
-/**
- * struct fw_rsc_hdr - firmware resource entry header
- * @type: resource type
- * @data: resource data
- *
- * Every resource entry begins with a 'struct fw_rsc_hdr' header providing
- * its @type. The content of the entry itself will immediately follow
- * this header, and it should be parsed according to the resource type.
- */
-struct fw_rsc_hdr {
-	u32 type;
-	u8 data[0];
-} __packed;
-
-/**
- * enum fw_resource_type - types of resource entries
- *
- * @RSC_CARVEOUT:   request for allocation of a physically contiguous
- *		    memory region.
- * @RSC_DEVMEM:     request to iommu_map a memory-based peripheral.
- * @RSC_TRACE:	    announces the availability of a trace buffer into which
- *		    the remote processor will be writing logs.
- * @RSC_VDEV:       declare support for a virtio device, and serve as its
- *		    virtio header.
- * @RSC_LAST:       just keep this one at the end
- *
- * For more details regarding a specific resource type, please see its
- * dedicated structure below.
- *
- * Please note that these values are used as indices to the rproc_handle_rsc
- * lookup table, so please keep them sane. Moreover, @RSC_LAST is used to
- * check the validity of an index before the lookup table is accessed, so
- * please update it as needed.
- */
-enum fw_resource_type {
-	RSC_CARVEOUT	= 0,
-	RSC_DEVMEM	= 1,
-	RSC_TRACE	= 2,
-	RSC_VDEV	= 3,
-	RSC_LAST	= 4,
-};
-
-#define FW_RSC_ADDR_ANY (0xFFFFFFFFFFFFFFFF)
-
-/**
- * struct fw_rsc_carveout - physically contiguous memory request
- * @da: device address
- * @pa: physical address
- * @len: length (in bytes)
- * @flags: iommu protection flags
- * @reserved: reserved (must be zero)
- * @name: human-readable name of the requested memory region
- *
- * This resource entry requests the host to allocate a physically contiguous
- * memory region.
- *
- * These request entries should precede other firmware resource entries,
- * as other entries might request placing other data objects inside
- * these memory regions (e.g. data/code segments, trace resource entries, ...).
- *
- * Allocating memory this way helps utilizing the reserved physical memory
- * (e.g. CMA) more efficiently, and also minimizes the number of TLB entries
- * needed to map it (in case @rproc is using an IOMMU). Reducing the TLB
- * pressure is important; it may have a substantial impact on performance.
- *
- * If the firmware is compiled with static addresses, then @da should specify
- * the expected device address of this memory region. If @da is set to
- * FW_RSC_ADDR_ANY, then the host will dynamically allocate it, and then
- * overwrite @da with the dynamically allocated address.
- *
- * We will always use @da to negotiate the device addresses, even if it
- * isn't using an iommu. In that case, though, it will obviously contain
- * physical addresses.
- *
- * Some remote processors needs to know the allocated physical address
- * even if they do use an iommu. This is needed, e.g., if they control
- * hardware accelerators which access the physical memory directly (this
- * is the case with OMAP4 for instance). In that case, the host will
- * overwrite @pa with the dynamically allocated physical address.
- * Generally we don't want to expose physical addresses if we don't have to
- * (remote processors are generally _not_ trusted), so we might want to
- * change this to happen _only_ when explicitly required by the hardware.
- *
- * @flags is used to provide IOMMU protection flags, and @name should
- * (optionally) contain a human readable name of this carveout region
- * (mainly for debugging purposes).
- */
-struct fw_rsc_carveout {
-	u32 da;
-	u32 pa;
-	u32 len;
-	u32 flags;
-	u32 reserved;
-	u8 name[32];
-} __packed;
-
-/**
- * struct fw_rsc_devmem - iommu mapping request
- * @da: device address
- * @pa: physical address
- * @len: length (in bytes)
- * @flags: iommu protection flags
- * @reserved: reserved (must be zero)
- * @name: human-readable name of the requested region to be mapped
- *
- * This resource entry requests the host to iommu map a physically contiguous
- * memory region. This is needed in case the remote processor requires
- * access to certain memory-based peripherals; _never_ use it to access
- * regular memory.
- *
- * This is obviously only needed if the remote processor is accessing memory
- * via an iommu.
- *
- * @da should specify the required device address, @pa should specify
- * the physical address we want to map, @len should specify the size of
- * the mapping and @flags is the IOMMU protection flags. As always, @name may
- * (optionally) contain a human readable name of this mapping (mainly for
- * debugging purposes).
- *
- * Note: at this point we just "trust" those devmem entries to contain valid
- * physical addresses, but this isn't safe and will be changed: eventually we
- * want remoteproc implementations to provide us ranges of physical addresses
- * the firmware is allowed to request, and not allow firmwares to request
- * access to physical addresses that are outside those ranges.
- */
-struct fw_rsc_devmem {
-	u32 da;
-	u32 pa;
-	u32 len;
-	u32 flags;
-	u32 reserved;
-	u8 name[32];
-} __packed;
-
-/**
- * struct fw_rsc_trace - trace buffer declaration
- * @da: device address
- * @len: length (in bytes)
- * @reserved: reserved (must be zero)
- * @name: human-readable name of the trace buffer
- *
- * This resource entry provides the host information about a trace buffer
- * into which the remote processor will write log messages.
- *
- * @da specifies the device address of the buffer, @len specifies
- * its size, and @name may contain a human readable name of the trace buffer.
- *
- * After booting the remote processor, the trace buffers are exposed to the
- * user via debugfs entries (called trace0, trace1, etc..).
- */
-struct fw_rsc_trace {
-	u32 da;
-	u32 len;
-	u32 reserved;
-	u8 name[32];
-} __packed;
-
-/**
- * struct fw_rsc_vdev_vring - vring descriptor entry
- * @da: device address
- * @align: the alignment between the consumer and producer parts of the vring
- * @num: num of buffers supported by this vring (must be power of two)
- * @notifyid is a unique rproc-wide notify index for this vring. This notify
- * index is used when kicking a remote processor, to let it know that this
- * vring is triggered.
- * @reserved: reserved (must be zero)
- *
- * This descriptor is not a resource entry by itself; it is part of the
- * vdev resource type (see below).
- *
- * Note that @da should either contain the device address where
- * the remote processor is expecting the vring, or indicate that
- * dynamically allocation of the vring's device address is supported.
- */
-struct fw_rsc_vdev_vring {
-	u32 da;
-	u32 align;
-	u32 num;
-	u32 notifyid;
-	u32 reserved;
-} __packed;
-
-/**
- * struct fw_rsc_vdev - virtio device header
- * @id: virtio device id (as in virtio_ids.h)
- * @notifyid is a unique rproc-wide notify index for this vdev. This notify
- * index is used when kicking a remote processor, to let it know that the
- * status/features of this vdev have changes.
- * @dfeatures specifies the virtio device features supported by the firmware
- * @gfeatures is a place holder used by the host to write back the
- * negotiated features that are supported by both sides.
- * @config_len is the size of the virtio config space of this vdev. The config
- * space lies in the resource table immediate after this vdev header.
- * @status is a place holder where the host will indicate its virtio progress.
- * @num_of_vrings indicates how many vrings are described in this vdev header
- * @reserved: reserved (must be zero)
- * @vring is an array of @num_of_vrings entries of 'struct fw_rsc_vdev_vring'.
- *
- * This resource is a virtio device header: it provides information about
- * the vdev, and is then used by the host and its peer remote processors
- * to negotiate and share certain virtio properties.
- *
- * By providing this resource entry, the firmware essentially asks remoteproc
- * to statically allocate a vdev upon registration of the rproc (dynamic vdev
- * allocation is not yet supported).
- *
- * Note: unlike virtualization systems, the term 'host' here means
- * the Linux side which is running remoteproc to control the remote
- * processors. We use the name 'gfeatures' to comply with virtio's terms,
- * though there isn't really any virtualized guest OS here: it's the host
- * which is responsible for negotiating the final features.
- * Yeah, it's a bit confusing.
- *
- * Note: immediately following this structure is the virtio config space for
- * this vdev (which is specific to the vdev; for more info, read the virtio
- * spec). the size of the config space is specified by @config_len.
- */
-struct fw_rsc_vdev {
-	u32 id;
-	u32 notifyid;
-	u32 dfeatures;
-	u32 gfeatures;
-	u32 config_len;
-	u8 status;
-	u8 num_of_vrings;
-	u8 reserved[2];
-	struct fw_rsc_vdev_vring vring[0];
-} __packed;
-
-/**
- * struct rproc_mem_entry - memory entry descriptor
- * @va:	virtual address
- * @dma: dma address
- * @len: length, in bytes
- * @da: device address
- * @priv: associated data
- * @node: list node
- */
-struct rproc_mem_entry {
-	void *va;
-	dma_addr_t dma;
-	int len;
-	u32 da;
-	void *priv;
-	struct list_head node;
-};
-
-struct rproc;
-
-/**
- * struct rproc_ops - platform-specific device handlers
- * @start:	power on the device and boot it
- * @stop:	power off the device
- * @kick:	kick a virtqueue (virtqueue id given as a parameter)
- */
-struct rproc_ops {
-	int (*start)(struct rproc *rproc);
-	int (*stop)(struct rproc *rproc);
-	void (*kick)(struct rproc *rproc, int vqid);
-};
-
-/**
- * enum rproc_state - remote processor states
- * @RPROC_OFFLINE:	device is powered off
- * @RPROC_SUSPENDED:	device is suspended; needs to be woken up to receive
- *			a message.
- * @RPROC_RUNNING:	device is up and running
- * @RPROC_CRASHED:	device has crashed; need to start recovery
- * @RPROC_LAST:		just keep this one at the end
- *
- * Please note that the values of these states are used as indices
- * to rproc_state_string, a state-to-name lookup table,
- * so please keep the two synchronized. @RPROC_LAST is used to check
- * the validity of an index before the lookup table is accessed, so
- * please update it as needed too.
- */
-enum rproc_state {
-	RPROC_OFFLINE	= 0,
-	RPROC_SUSPENDED	= 1,
-	RPROC_RUNNING	= 2,
-	RPROC_CRASHED	= 3,
-	RPROC_LAST	= 4,
-};
-
-/**
- * struct rproc - represents a physical remote processor device
- * @node: klist node of this rproc object
- * @domain: iommu domain
- * @name: human readable name of the rproc
- * @firmware: name of firmware file to be loaded
- * @priv: private data which belongs to the platform-specific rproc module
- * @ops: platform-specific start/stop rproc handlers
- * @dev: underlying device
- * @refcount: refcount of users that have a valid pointer to this rproc
- * @power: refcount of users who need this rproc powered up
- * @state: state of the device
- * @lock: lock which protects concurrent manipulations of the rproc
- * @dbg_dir: debugfs directory of this rproc device
- * @traces: list of trace buffers
- * @num_traces: number of trace buffers
- * @carveouts: list of physically contiguous memory allocations
- * @mappings: list of iommu mappings we initiated, needed on shutdown
- * @firmware_loading_complete: marks e/o asynchronous firmware loading
- * @bootaddr: address of first instruction to boot rproc with (optional)
- * @rvdevs: list of remote virtio devices
- * @notifyids: idr for dynamically assigning rproc-wide unique notify ids
- */
-struct rproc {
-	struct klist_node node;
-	struct iommu_domain *domain;
-	const char *name;
-	const char *firmware;
-	void *priv;
-	const struct rproc_ops *ops;
-	struct device *dev;
-	struct kref refcount;
-	atomic_t power;
-	unsigned int state;
-	struct mutex lock;
-	struct dentry *dbg_dir;
-	struct list_head traces;
-	int num_traces;
-	struct list_head carveouts;
-	struct list_head mappings;
-	struct completion firmware_loading_complete;
-	u32 bootaddr;
-	struct list_head rvdevs;
-	struct idr notifyids;
-};
-
-/* we currently support only two vrings per rvdev */
-#define RVDEV_NUM_VRINGS 2
-
-/**
- * struct rproc_vring - remoteproc vring state
- * @va:	virtual address
- * @dma: dma address
- * @len: length, in bytes
- * @da: device address
- * @align: vring alignment
- * @notifyid: rproc-specific unique vring index
- * @rvdev: remote vdev
- * @vq: the virtqueue of this vring
- */
-struct rproc_vring {
-	void *va;
-	dma_addr_t dma;
-	int len;
-	u32 da;
-	u32 align;
-	int notifyid;
-	struct rproc_vdev *rvdev;
-	struct virtqueue *vq;
-};
-
-/**
- * struct rproc_vdev - remoteproc state for a supported virtio device
- * @node: list node
- * @rproc: the rproc handle
- * @vdev: the virio device
- * @vring: the vrings for this vdev
- * @dfeatures: virtio device features
- * @gfeatures: virtio guest features
- */
-struct rproc_vdev {
-	struct list_head node;
-	struct rproc *rproc;
-	struct virtio_device vdev;
-	struct rproc_vring vring[RVDEV_NUM_VRINGS];
-	unsigned long dfeatures;
-	unsigned long gfeatures;
-};
-
-struct rproc *rproc_get_by_name(const char *name);
-void rproc_put(struct rproc *rproc);
-
-struct rproc *rproc_alloc(struct device *dev, const char *name,
-				const struct rproc_ops *ops,
-				const char *firmware, int len);
-void rproc_free(struct rproc *rproc);
-int rproc_register(struct rproc *rproc);
-int rproc_unregister(struct rproc *rproc);
-
-int rproc_boot(struct rproc *rproc);
-void rproc_shutdown(struct rproc *rproc);
-
-static inline struct rproc_vdev *vdev_to_rvdev(struct virtio_device *vdev)
-{
-	return container_of(vdev, struct rproc_vdev, vdev);
-}
-
-static inline struct rproc *vdev_to_rproc(struct virtio_device *vdev)
-{
-	struct rproc_vdev *rvdev = vdev_to_rvdev(vdev);
-
-	return rvdev->rproc;
-}
-
-#endif /* REMOTEPROC_H */
diff --git a/ANDROID_3.4.5/include/linux/res_counter.h b/ANDROID_3.4.5/include/linux/res_counter.h
deleted file mode 100644
index da81af08..00000000
--- a/ANDROID_3.4.5/include/linux/res_counter.h
+++ /dev/null
@@ -1,226 +0,0 @@
-#ifndef __RES_COUNTER_H__
-#define __RES_COUNTER_H__
-
-/*
- * Resource Counters
- * Contain common data types and routines for resource accounting
- *
- * Copyright 2007 OpenVZ SWsoft Inc
- *
- * Author: Pavel Emelianov <xemul@openvz.org>
- *
- * See Documentation/cgroups/resource_counter.txt for more
- * info about what this counter is.
- */
-
-#include <linux/cgroup.h>
-
-/*
- * The core object. the cgroup that wishes to account for some
- * resource may include this counter into its structures and use
- * the helpers described beyond
- */
-
-struct res_counter {
-	/*
-	 * the current resource consumption level
-	 */
-	unsigned long long usage;
-	/*
-	 * the maximal value of the usage from the counter creation
-	 */
-	unsigned long long max_usage;
-	/*
-	 * the limit that usage cannot exceed
-	 */
-	unsigned long long limit;
-	/*
-	 * the limit that usage can be exceed
-	 */
-	unsigned long long soft_limit;
-	/*
-	 * the number of unsuccessful attempts to consume the resource
-	 */
-	unsigned long long failcnt;
-	/*
-	 * the lock to protect all of the above.
-	 * the routines below consider this to be IRQ-safe
-	 */
-	spinlock_t lock;
-	/*
-	 * Parent counter, used for hierarchial resource accounting
-	 */
-	struct res_counter *parent;
-};
-
-#define RESOURCE_MAX (unsigned long long)LLONG_MAX
-
-/**
- * Helpers to interact with userspace
- * res_counter_read_u64() - returns the value of the specified member.
- * res_counter_read/_write - put/get the specified fields from the
- * res_counter struct to/from the user
- *
- * @counter:     the counter in question
- * @member:  the field to work with (see RES_xxx below)
- * @buf:     the buffer to opeate on,...
- * @nbytes:  its size...
- * @pos:     and the offset.
- */
-
-u64 res_counter_read_u64(struct res_counter *counter, int member);
-
-ssize_t res_counter_read(struct res_counter *counter, int member,
-		const char __user *buf, size_t nbytes, loff_t *pos,
-		int (*read_strategy)(unsigned long long val, char *s));
-
-typedef int (*write_strategy_fn)(const char *buf, unsigned long long *val);
-
-int res_counter_memparse_write_strategy(const char *buf,
-					unsigned long long *res);
-
-int res_counter_write(struct res_counter *counter, int member,
-		      const char *buffer, write_strategy_fn write_strategy);
-
-/*
- * the field descriptors. one for each member of res_counter
- */
-
-enum {
-	RES_USAGE,
-	RES_MAX_USAGE,
-	RES_LIMIT,
-	RES_FAILCNT,
-	RES_SOFT_LIMIT,
-};
-
-/*
- * helpers for accounting
- */
-
-void res_counter_init(struct res_counter *counter, struct res_counter *parent);
-
-/*
- * charge - try to consume more resource.
- *
- * @counter: the counter
- * @val: the amount of the resource. each controller defines its own
- *       units, e.g. numbers, bytes, Kbytes, etc
- *
- * returns 0 on success and <0 if the counter->usage will exceed the
- * counter->limit _locked call expects the counter->lock to be taken
- *
- * charge_nofail works the same, except that it charges the resource
- * counter unconditionally, and returns < 0 if the after the current
- * charge we are over limit.
- */
-
-int __must_check res_counter_charge_locked(struct res_counter *counter,
-		unsigned long val);
-int __must_check res_counter_charge(struct res_counter *counter,
-		unsigned long val, struct res_counter **limit_fail_at);
-int __must_check res_counter_charge_nofail(struct res_counter *counter,
-		unsigned long val, struct res_counter **limit_fail_at);
-
-/*
- * uncharge - tell that some portion of the resource is released
- *
- * @counter: the counter
- * @val: the amount of the resource
- *
- * these calls check for usage underflow and show a warning on the console
- * _locked call expects the counter->lock to be taken
- */
-
-void res_counter_uncharge_locked(struct res_counter *counter, unsigned long val);
-void res_counter_uncharge(struct res_counter *counter, unsigned long val);
-
-/**
- * res_counter_margin - calculate chargeable space of a counter
- * @cnt: the counter
- *
- * Returns the difference between the hard limit and the current usage
- * of resource counter @cnt.
- */
-static inline unsigned long long res_counter_margin(struct res_counter *cnt)
-{
-	unsigned long long margin;
-	unsigned long flags;
-
-	spin_lock_irqsave(&cnt->lock, flags);
-	if (cnt->limit > cnt->usage)
-		margin = cnt->limit - cnt->usage;
-	else
-		margin = 0;
-	spin_unlock_irqrestore(&cnt->lock, flags);
-	return margin;
-}
-
-/**
- * Get the difference between the usage and the soft limit
- * @cnt: The counter
- *
- * Returns 0 if usage is less than or equal to soft limit
- * The difference between usage and soft limit, otherwise.
- */
-static inline unsigned long long
-res_counter_soft_limit_excess(struct res_counter *cnt)
-{
-	unsigned long long excess;
-	unsigned long flags;
-
-	spin_lock_irqsave(&cnt->lock, flags);
-	if (cnt->usage <= cnt->soft_limit)
-		excess = 0;
-	else
-		excess = cnt->usage - cnt->soft_limit;
-	spin_unlock_irqrestore(&cnt->lock, flags);
-	return excess;
-}
-
-static inline void res_counter_reset_max(struct res_counter *cnt)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&cnt->lock, flags);
-	cnt->max_usage = cnt->usage;
-	spin_unlock_irqrestore(&cnt->lock, flags);
-}
-
-static inline void res_counter_reset_failcnt(struct res_counter *cnt)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&cnt->lock, flags);
-	cnt->failcnt = 0;
-	spin_unlock_irqrestore(&cnt->lock, flags);
-}
-
-static inline int res_counter_set_limit(struct res_counter *cnt,
-		unsigned long long limit)
-{
-	unsigned long flags;
-	int ret = -EBUSY;
-
-	spin_lock_irqsave(&cnt->lock, flags);
-	if (cnt->usage <= limit) {
-		cnt->limit = limit;
-		ret = 0;
-	}
-	spin_unlock_irqrestore(&cnt->lock, flags);
-	return ret;
-}
-
-static inline int
-res_counter_set_soft_limit(struct res_counter *cnt,
-				unsigned long long soft_limit)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&cnt->lock, flags);
-	cnt->soft_limit = soft_limit;
-	spin_unlock_irqrestore(&cnt->lock, flags);
-	return 0;
-}
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/resource.h b/ANDROID_3.4.5/include/linux/resource.h
deleted file mode 100644
index d01c96c1..00000000
--- a/ANDROID_3.4.5/include/linux/resource.h
+++ /dev/null
@@ -1,89 +0,0 @@
-#ifndef _LINUX_RESOURCE_H
-#define _LINUX_RESOURCE_H
-
-#include <linux/time.h>
-#include <linux/types.h>
-
-/*
- * Resource control/accounting header file for linux
- */
-
-/*
- * Definition of struct rusage taken from BSD 4.3 Reno
- * 
- * We don't support all of these yet, but we might as well have them....
- * Otherwise, each time we add new items, programs which depend on this
- * structure will lose.  This reduces the chances of that happening.
- */
-#define	RUSAGE_SELF	0
-#define	RUSAGE_CHILDREN	(-1)
-#define RUSAGE_BOTH	(-2)		/* sys_wait4() uses this */
-#define	RUSAGE_THREAD	1		/* only the calling thread */
-
-struct	rusage {
-	struct timeval ru_utime;	/* user time used */
-	struct timeval ru_stime;	/* system time used */
-	long	ru_maxrss;		/* maximum resident set size */
-	long	ru_ixrss;		/* integral shared memory size */
-	long	ru_idrss;		/* integral unshared data size */
-	long	ru_isrss;		/* integral unshared stack size */
-	long	ru_minflt;		/* page reclaims */
-	long	ru_majflt;		/* page faults */
-	long	ru_nswap;		/* swaps */
-	long	ru_inblock;		/* block input operations */
-	long	ru_oublock;		/* block output operations */
-	long	ru_msgsnd;		/* messages sent */
-	long	ru_msgrcv;		/* messages received */
-	long	ru_nsignals;		/* signals received */
-	long	ru_nvcsw;		/* voluntary context switches */
-	long	ru_nivcsw;		/* involuntary " */
-};
-
-struct rlimit {
-	unsigned long	rlim_cur;
-	unsigned long	rlim_max;
-};
-
-#define RLIM64_INFINITY		(~0ULL)
-
-struct rlimit64 {
-	__u64 rlim_cur;
-	__u64 rlim_max;
-};
-
-#define	PRIO_MIN	(-20)
-#define	PRIO_MAX	20
-
-#define	PRIO_PROCESS	0
-#define	PRIO_PGRP	1
-#define	PRIO_USER	2
-
-/*
- * Limit the stack by to some sane default: root can always
- * increase this limit if needed..  8MB seems reasonable.
- */
-#define _STK_LIM	(8*1024*1024)
-
-/*
- * GPG2 wants 64kB of mlocked memory, to make sure pass phrases
- * and other sensitive information are never written to disk.
- */
-#define MLOCK_LIMIT	((PAGE_SIZE > 64*1024) ? PAGE_SIZE : 64*1024)
-
-/*
- * Due to binary compatibility, the actual resource numbers
- * may be different for different linux versions..
- */
-#include <asm/resource.h>
-
-#ifdef __KERNEL__
-
-struct task_struct;
-
-int getrusage(struct task_struct *p, int who, struct rusage __user *ru);
-int do_prlimit(struct task_struct *tsk, unsigned int resource,
-		struct rlimit *new_rlim, struct rlimit *old_rlim);
-
-#endif /* __KERNEL__ */
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/resume-trace.h b/ANDROID_3.4.5/include/linux/resume-trace.h
deleted file mode 100644
index f31db236..00000000
--- a/ANDROID_3.4.5/include/linux/resume-trace.h
+++ /dev/null
@@ -1,34 +0,0 @@
-#ifndef RESUME_TRACE_H
-#define RESUME_TRACE_H
-
-#ifdef CONFIG_PM_TRACE
-#include <asm/resume-trace.h>
-#include <linux/types.h>
-
-extern int pm_trace_enabled;
-
-static inline int pm_trace_is_enabled(void)
-{
-       return pm_trace_enabled;
-}
-
-struct device;
-extern void set_trace_device(struct device *);
-extern void generate_resume_trace(const void *tracedata, unsigned int user);
-extern int show_trace_dev_match(char *buf, size_t size);
-
-#define TRACE_DEVICE(dev) do { \
-	if (pm_trace_enabled) \
-		set_trace_device(dev); \
-	} while(0)
-
-#else
-
-static inline int pm_trace_is_enabled(void) { return 0; }
-
-#define TRACE_DEVICE(dev) do { } while (0)
-#define TRACE_RESUME(dev) do { } while (0)
-
-#endif
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/rfkill-gpio.h b/ANDROID_3.4.5/include/linux/rfkill-gpio.h
deleted file mode 100644
index 4d09f6ea..00000000
--- a/ANDROID_3.4.5/include/linux/rfkill-gpio.h
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- * Copyright (c) 2011, NVIDIA Corporation.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
- */
-
-
-#ifndef __RFKILL_GPIO_H
-#define __RFKILL_GPIO_H
-
-#include <linux/types.h>
-#include <linux/rfkill.h>
-
-/**
- * struct rfkill_gpio_platform_data - platform data for rfkill gpio device.
- * for unused gpio's, the expected value is -1.
- * @name:		name for the gpio rf kill instance
- * @reset_gpio:		GPIO which is used for reseting rfkill switch
- * @shutdown_gpio:	GPIO which is used for shutdown of rfkill switch
- * @power_clk_name:	[optional] name of clk to turn off while blocked
- * @gpio_runtime_close:	clean up platform specific gpio configuration
- * @gpio_runtime_setup:	set up platform specific gpio configuration
- */
-
-struct rfkill_gpio_platform_data {
-	char			*name;
-	int			reset_gpio;
-	int			shutdown_gpio;
-	const char		*power_clk_name;
-	enum rfkill_type	type;
-	void	(*gpio_runtime_close)(struct platform_device *);
-	int	(*gpio_runtime_setup)(struct platform_device *);
-};
-
-#endif /* __RFKILL_GPIO_H */
diff --git a/ANDROID_3.4.5/include/linux/rfkill-regulator.h b/ANDROID_3.4.5/include/linux/rfkill-regulator.h
deleted file mode 100644
index aca36bc8..00000000
--- a/ANDROID_3.4.5/include/linux/rfkill-regulator.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * rfkill-regulator.c - Regulator consumer driver for rfkill
- *
- * Copyright (C) 2009  Guiming Zhuo <gmzhuo@gmail.com>
- * Copyright (C) 2011  Antonio Ospite <ospite@studenti.unina.it>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#ifndef __LINUX_RFKILL_REGULATOR_H
-#define __LINUX_RFKILL_REGULATOR_H
-
-/*
- * Use "vrfkill" as supply id when declaring the regulator consumer:
- *
- * static struct regulator_consumer_supply pcap_regulator_V6_consumers [] = {
- * 	{ .dev_name = "rfkill-regulator.0", .supply = "vrfkill" },
- * };
- *
- * If you have several regulator driven rfkill, you can append a numerical id to
- * .dev_name as done above, and use the same id when declaring the platform
- * device:
- *
- * static struct rfkill_regulator_platform_data ezx_rfkill_bt_data = {
- * 	.name  = "ezx-bluetooth",
- * 	.type  = RFKILL_TYPE_BLUETOOTH,
- * };
- *
- * static struct platform_device a910_rfkill = {
- * 	.name  = "rfkill-regulator",
- * 	.id    = 0,
- * 	.dev   = {
- * 		.platform_data = &ezx_rfkill_bt_data,
- * 	},
- * };
- */
-
-#include <linux/rfkill.h>
-
-struct rfkill_regulator_platform_data {
-	char *name;             /* the name for the rfkill switch */
-	enum rfkill_type type;  /* the type as specified in rfkill.h */
-};
-
-#endif /* __LINUX_RFKILL_REGULATOR_H */
diff --git a/ANDROID_3.4.5/include/linux/rfkill.h b/ANDROID_3.4.5/include/linux/rfkill.h
deleted file mode 100644
index 6fdf0273..00000000
--- a/ANDROID_3.4.5/include/linux/rfkill.h
+++ /dev/null
@@ -1,359 +0,0 @@
-#ifndef __RFKILL_H
-#define __RFKILL_H
-
-/*
- * Copyright (C) 2006 - 2007 Ivo van Doorn
- * Copyright (C) 2007 Dmitry Torokhov
- * Copyright 2009 Johannes Berg <johannes@sipsolutions.net>
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- */
-
-#include <linux/types.h>
-
-/* define userspace visible states */
-#define RFKILL_STATE_SOFT_BLOCKED	0
-#define RFKILL_STATE_UNBLOCKED		1
-#define RFKILL_STATE_HARD_BLOCKED	2
-
-/**
- * enum rfkill_type - type of rfkill switch.
- *
- * @RFKILL_TYPE_ALL: toggles all switches (requests only - not a switch type)
- * @RFKILL_TYPE_WLAN: switch is on a 802.11 wireless network device.
- * @RFKILL_TYPE_BLUETOOTH: switch is on a bluetooth device.
- * @RFKILL_TYPE_UWB: switch is on a ultra wideband device.
- * @RFKILL_TYPE_WIMAX: switch is on a WiMAX device.
- * @RFKILL_TYPE_WWAN: switch is on a wireless WAN device.
- * @RFKILL_TYPE_GPS: switch is on a GPS device.
- * @RFKILL_TYPE_FM: switch is on a FM radio device.
- * @NUM_RFKILL_TYPES: number of defined rfkill types
- */
-enum rfkill_type {
-	RFKILL_TYPE_ALL = 0,
-	RFKILL_TYPE_WLAN,
-	RFKILL_TYPE_BLUETOOTH,
-	RFKILL_TYPE_UWB,
-	RFKILL_TYPE_WIMAX,
-	RFKILL_TYPE_WWAN,
-	RFKILL_TYPE_GPS,
-	RFKILL_TYPE_FM,
-	NUM_RFKILL_TYPES,
-};
-
-/**
- * enum rfkill_operation - operation types
- * @RFKILL_OP_ADD: a device was added
- * @RFKILL_OP_DEL: a device was removed
- * @RFKILL_OP_CHANGE: a device's state changed -- userspace changes one device
- * @RFKILL_OP_CHANGE_ALL: userspace changes all devices (of a type, or all)
- */
-enum rfkill_operation {
-	RFKILL_OP_ADD = 0,
-	RFKILL_OP_DEL,
-	RFKILL_OP_CHANGE,
-	RFKILL_OP_CHANGE_ALL,
-};
-
-/**
- * struct rfkill_event - events for userspace on /dev/rfkill
- * @idx: index of dev rfkill
- * @type: type of the rfkill struct
- * @op: operation code
- * @hard: hard state (0/1)
- * @soft: soft state (0/1)
- *
- * Structure used for userspace communication on /dev/rfkill,
- * used for events from the kernel and control to the kernel.
- */
-struct rfkill_event {
-	__u32 idx;
-	__u8  type;
-	__u8  op;
-	__u8  soft, hard;
-} __attribute__((packed));
-
-/*
- * We are planning to be backward and forward compatible with changes
- * to the event struct, by adding new, optional, members at the end.
- * When reading an event (whether the kernel from userspace or vice
- * versa) we need to accept anything that's at least as large as the
- * version 1 event size, but might be able to accept other sizes in
- * the future.
- *
- * One exception is the kernel -- we already have two event sizes in
- * that we've made the 'hard' member optional since our only option
- * is to ignore it anyway.
- */
-#define RFKILL_EVENT_SIZE_V1	8
-
-/* ioctl for turning off rfkill-input (if present) */
-#define RFKILL_IOC_MAGIC	'R'
-#define RFKILL_IOC_NOINPUT	1
-#define RFKILL_IOCTL_NOINPUT	_IO(RFKILL_IOC_MAGIC, RFKILL_IOC_NOINPUT)
-
-/* and that's all userspace gets */
-#ifdef __KERNEL__
-/* don't allow anyone to use these in the kernel */
-enum rfkill_user_states {
-	RFKILL_USER_STATE_SOFT_BLOCKED	= RFKILL_STATE_SOFT_BLOCKED,
-	RFKILL_USER_STATE_UNBLOCKED	= RFKILL_STATE_UNBLOCKED,
-	RFKILL_USER_STATE_HARD_BLOCKED	= RFKILL_STATE_HARD_BLOCKED,
-};
-#undef RFKILL_STATE_SOFT_BLOCKED
-#undef RFKILL_STATE_UNBLOCKED
-#undef RFKILL_STATE_HARD_BLOCKED
-
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/mutex.h>
-#include <linux/leds.h>
-#include <linux/err.h>
-
-struct device;
-/* this is opaque */
-struct rfkill;
-
-/**
- * struct rfkill_ops - rfkill driver methods
- *
- * @poll: poll the rfkill block state(s) -- only assign this method
- *	when you need polling. When called, simply call one of the
- *	rfkill_set{,_hw,_sw}_state family of functions. If the hw
- *	is getting unblocked you need to take into account the return
- *	value of those functions to make sure the software block is
- *	properly used.
- * @query: query the rfkill block state(s) and call exactly one of the
- *	rfkill_set{,_hw,_sw}_state family of functions. Assign this
- *	method if input events can cause hardware state changes to make
- *	the rfkill core query your driver before setting a requested
- *	block.
- * @set_block: turn the transmitter on (blocked == false) or off
- *	(blocked == true) -- ignore and return 0 when hard blocked.
- *	This callback must be assigned.
- */
-struct rfkill_ops {
-	void	(*poll)(struct rfkill *rfkill, void *data);
-	void	(*query)(struct rfkill *rfkill, void *data);
-	int	(*set_block)(void *data, bool blocked);
-};
-
-#if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE)
-/**
- * rfkill_alloc - allocate rfkill structure
- * @name: name of the struct -- the string is not copied internally
- * @parent: device that has rf switch on it
- * @type: type of the switch (RFKILL_TYPE_*)
- * @ops: rfkill methods
- * @ops_data: data passed to each method
- *
- * This function should be called by the transmitter driver to allocate an
- * rfkill structure. Returns %NULL on failure.
- */
-struct rfkill * __must_check rfkill_alloc(const char *name,
-					  struct device *parent,
-					  const enum rfkill_type type,
-					  const struct rfkill_ops *ops,
-					  void *ops_data);
-
-/**
- * rfkill_register - Register a rfkill structure.
- * @rfkill: rfkill structure to be registered
- *
- * This function should be called by the transmitter driver to register
- * the rfkill structure. Before calling this function the driver needs
- * to be ready to service method calls from rfkill.
- *
- * If rfkill_init_sw_state() is not called before registration,
- * set_block() will be called to initialize the software blocked state
- * to a default value.
- *
- * If the hardware blocked state is not set before registration,
- * it is assumed to be unblocked.
- */
-int __must_check rfkill_register(struct rfkill *rfkill);
-
-/**
- * rfkill_pause_polling(struct rfkill *rfkill)
- *
- * Pause polling -- say transmitter is off for other reasons.
- * NOTE: not necessary for suspend/resume -- in that case the
- * core stops polling anyway
- */
-void rfkill_pause_polling(struct rfkill *rfkill);
-
-/**
- * rfkill_resume_polling(struct rfkill *rfkill)
- *
- * Pause polling -- say transmitter is off for other reasons.
- * NOTE: not necessary for suspend/resume -- in that case the
- * core stops polling anyway
- */
-void rfkill_resume_polling(struct rfkill *rfkill);
-
-
-/**
- * rfkill_unregister - Unregister a rfkill structure.
- * @rfkill: rfkill structure to be unregistered
- *
- * This function should be called by the network driver during device
- * teardown to destroy rfkill structure. Until it returns, the driver
- * needs to be able to service method calls.
- */
-void rfkill_unregister(struct rfkill *rfkill);
-
-/**
- * rfkill_destroy - free rfkill structure
- * @rfkill: rfkill structure to be destroyed
- *
- * Destroys the rfkill structure.
- */
-void rfkill_destroy(struct rfkill *rfkill);
-
-/**
- * rfkill_set_hw_state - Set the internal rfkill hardware block state
- * @rfkill: pointer to the rfkill class to modify.
- * @state: the current hardware block state to set
- *
- * rfkill drivers that get events when the hard-blocked state changes
- * use this function to notify the rfkill core (and through that also
- * userspace) of the current state.  They should also use this after
- * resume if the state could have changed.
- *
- * You need not (but may) call this function if poll_state is assigned.
- *
- * This function can be called in any context, even from within rfkill
- * callbacks.
- *
- * The function returns the combined block state (true if transmitter
- * should be blocked) so that drivers need not keep track of the soft
- * block state -- which they might not be able to.
- */
-bool rfkill_set_hw_state(struct rfkill *rfkill, bool blocked);
-
-/**
- * rfkill_set_sw_state - Set the internal rfkill software block state
- * @rfkill: pointer to the rfkill class to modify.
- * @state: the current software block state to set
- *
- * rfkill drivers that get events when the soft-blocked state changes
- * (yes, some platforms directly act on input but allow changing again)
- * use this function to notify the rfkill core (and through that also
- * userspace) of the current state.
- *
- * Drivers should also call this function after resume if the state has
- * been changed by the user.  This only makes sense for "persistent"
- * devices (see rfkill_init_sw_state()).
- *
- * This function can be called in any context, even from within rfkill
- * callbacks.
- *
- * The function returns the combined block state (true if transmitter
- * should be blocked).
- */
-bool rfkill_set_sw_state(struct rfkill *rfkill, bool blocked);
-
-/**
- * rfkill_init_sw_state - Initialize persistent software block state
- * @rfkill: pointer to the rfkill class to modify.
- * @state: the current software block state to set
- *
- * rfkill drivers that preserve their software block state over power off
- * use this function to notify the rfkill core (and through that also
- * userspace) of their initial state.  It should only be used before
- * registration.
- *
- * In addition, it marks the device as "persistent", an attribute which
- * can be read by userspace.  Persistent devices are expected to preserve
- * their own state when suspended.
- */
-void rfkill_init_sw_state(struct rfkill *rfkill, bool blocked);
-
-/**
- * rfkill_set_states - Set the internal rfkill block states
- * @rfkill: pointer to the rfkill class to modify.
- * @sw: the current software block state to set
- * @hw: the current hardware block state to set
- *
- * This function can be called in any context, even from within rfkill
- * callbacks.
- */
-void rfkill_set_states(struct rfkill *rfkill, bool sw, bool hw);
-
-/**
- * rfkill_blocked - query rfkill block
- *
- * @rfkill: rfkill struct to query
- */
-bool rfkill_blocked(struct rfkill *rfkill);
-#else /* !RFKILL */
-static inline struct rfkill * __must_check
-rfkill_alloc(const char *name,
-	     struct device *parent,
-	     const enum rfkill_type type,
-	     const struct rfkill_ops *ops,
-	     void *ops_data)
-{
-	return ERR_PTR(-ENODEV);
-}
-
-static inline int __must_check rfkill_register(struct rfkill *rfkill)
-{
-	if (rfkill == ERR_PTR(-ENODEV))
-		return 0;
-	return -EINVAL;
-}
-
-static inline void rfkill_pause_polling(struct rfkill *rfkill)
-{
-}
-
-static inline void rfkill_resume_polling(struct rfkill *rfkill)
-{
-}
-
-static inline void rfkill_unregister(struct rfkill *rfkill)
-{
-}
-
-static inline void rfkill_destroy(struct rfkill *rfkill)
-{
-}
-
-static inline bool rfkill_set_hw_state(struct rfkill *rfkill, bool blocked)
-{
-	return blocked;
-}
-
-static inline bool rfkill_set_sw_state(struct rfkill *rfkill, bool blocked)
-{
-	return blocked;
-}
-
-static inline void rfkill_init_sw_state(struct rfkill *rfkill, bool blocked)
-{
-}
-
-static inline void rfkill_set_states(struct rfkill *rfkill, bool sw, bool hw)
-{
-}
-
-static inline bool rfkill_blocked(struct rfkill *rfkill)
-{
-	return false;
-}
-#endif /* RFKILL || RFKILL_MODULE */
-
-#endif /* __KERNEL__ */
-
-#endif /* RFKILL_H */
diff --git a/ANDROID_3.4.5/include/linux/ring_buffer.h b/ANDROID_3.4.5/include/linux/ring_buffer.h
deleted file mode 100644
index 7be2e88f..00000000
--- a/ANDROID_3.4.5/include/linux/ring_buffer.h
+++ /dev/null
@@ -1,191 +0,0 @@
-#ifndef _LINUX_RING_BUFFER_H
-#define _LINUX_RING_BUFFER_H
-
-#include <linux/kmemcheck.h>
-#include <linux/mm.h>
-#include <linux/seq_file.h>
-
-struct ring_buffer;
-struct ring_buffer_iter;
-
-/*
- * Don't refer to this struct directly, use functions below.
- */
-struct ring_buffer_event {
-	kmemcheck_bitfield_begin(bitfield);
-	u32		type_len:5, time_delta:27;
-	kmemcheck_bitfield_end(bitfield);
-
-	u32		array[];
-};
-
-/**
- * enum ring_buffer_type - internal ring buffer types
- *
- * @RINGBUF_TYPE_PADDING:	Left over page padding or discarded event
- *				 If time_delta is 0:
- *				  array is ignored
- *				  size is variable depending on how much
- *				  padding is needed
- *				 If time_delta is non zero:
- *				  array[0] holds the actual length
- *				  size = 4 + length (bytes)
- *
- * @RINGBUF_TYPE_TIME_EXTEND:	Extend the time delta
- *				 array[0] = time delta (28 .. 59)
- *				 size = 8 bytes
- *
- * @RINGBUF_TYPE_TIME_STAMP:	Sync time stamp with external clock
- *				 array[0]    = tv_nsec
- *				 array[1..2] = tv_sec
- *				 size = 16 bytes
- *
- * <= @RINGBUF_TYPE_DATA_TYPE_LEN_MAX:
- *				Data record
- *				 If type_len is zero:
- *				  array[0] holds the actual length
- *				  array[1..(length+3)/4] holds data
- *				  size = 4 + length (bytes)
- *				 else
- *				  length = type_len << 2
- *				  array[0..(length+3)/4-1] holds data
- *				  size = 4 + length (bytes)
- */
-enum ring_buffer_type {
-	RINGBUF_TYPE_DATA_TYPE_LEN_MAX = 28,
-	RINGBUF_TYPE_PADDING,
-	RINGBUF_TYPE_TIME_EXTEND,
-	/* FIXME: RINGBUF_TYPE_TIME_STAMP not implemented */
-	RINGBUF_TYPE_TIME_STAMP,
-};
-
-unsigned ring_buffer_event_length(struct ring_buffer_event *event);
-void *ring_buffer_event_data(struct ring_buffer_event *event);
-
-/*
- * ring_buffer_discard_commit will remove an event that has not
- *   ben committed yet. If this is used, then ring_buffer_unlock_commit
- *   must not be called on the discarded event. This function
- *   will try to remove the event from the ring buffer completely
- *   if another event has not been written after it.
- *
- * Example use:
- *
- *  if (some_condition)
- *    ring_buffer_discard_commit(buffer, event);
- *  else
- *    ring_buffer_unlock_commit(buffer, event);
- */
-void ring_buffer_discard_commit(struct ring_buffer *buffer,
-				struct ring_buffer_event *event);
-
-/*
- * size is in bytes for each per CPU buffer.
- */
-struct ring_buffer *
-__ring_buffer_alloc(unsigned long size, unsigned flags, struct lock_class_key *key);
-
-/*
- * Because the ring buffer is generic, if other users of the ring buffer get
- * traced by ftrace, it can produce lockdep warnings. We need to keep each
- * ring buffer's lock class separate.
- */
-#define ring_buffer_alloc(size, flags)			\
-({							\
-	static struct lock_class_key __key;		\
-	__ring_buffer_alloc((size), (flags), &__key);	\
-})
-
-void ring_buffer_free(struct ring_buffer *buffer);
-
-int ring_buffer_resize(struct ring_buffer *buffer, unsigned long size);
-
-void ring_buffer_change_overwrite(struct ring_buffer *buffer, int val);
-
-struct ring_buffer_event *ring_buffer_lock_reserve(struct ring_buffer *buffer,
-						   unsigned long length);
-int ring_buffer_unlock_commit(struct ring_buffer *buffer,
-			      struct ring_buffer_event *event);
-int ring_buffer_write(struct ring_buffer *buffer,
-		      unsigned long length, void *data);
-
-struct ring_buffer_event *
-ring_buffer_peek(struct ring_buffer *buffer, int cpu, u64 *ts,
-		 unsigned long *lost_events);
-struct ring_buffer_event *
-ring_buffer_consume(struct ring_buffer *buffer, int cpu, u64 *ts,
-		    unsigned long *lost_events);
-
-struct ring_buffer_iter *
-ring_buffer_read_prepare(struct ring_buffer *buffer, int cpu);
-void ring_buffer_read_prepare_sync(void);
-void ring_buffer_read_start(struct ring_buffer_iter *iter);
-void ring_buffer_read_finish(struct ring_buffer_iter *iter);
-
-struct ring_buffer_event *
-ring_buffer_iter_peek(struct ring_buffer_iter *iter, u64 *ts);
-struct ring_buffer_event *
-ring_buffer_read(struct ring_buffer_iter *iter, u64 *ts);
-void ring_buffer_iter_reset(struct ring_buffer_iter *iter);
-int ring_buffer_iter_empty(struct ring_buffer_iter *iter);
-
-unsigned long ring_buffer_size(struct ring_buffer *buffer);
-
-void ring_buffer_reset_cpu(struct ring_buffer *buffer, int cpu);
-void ring_buffer_reset(struct ring_buffer *buffer);
-
-#ifdef CONFIG_RING_BUFFER_ALLOW_SWAP
-int ring_buffer_swap_cpu(struct ring_buffer *buffer_a,
-			 struct ring_buffer *buffer_b, int cpu);
-#else
-static inline int
-ring_buffer_swap_cpu(struct ring_buffer *buffer_a,
-		     struct ring_buffer *buffer_b, int cpu)
-{
-	return -ENODEV;
-}
-#endif
-
-int ring_buffer_empty(struct ring_buffer *buffer);
-int ring_buffer_empty_cpu(struct ring_buffer *buffer, int cpu);
-
-void ring_buffer_record_disable(struct ring_buffer *buffer);
-void ring_buffer_record_enable(struct ring_buffer *buffer);
-void ring_buffer_record_off(struct ring_buffer *buffer);
-void ring_buffer_record_on(struct ring_buffer *buffer);
-int ring_buffer_record_is_on(struct ring_buffer *buffer);
-void ring_buffer_record_disable_cpu(struct ring_buffer *buffer, int cpu);
-void ring_buffer_record_enable_cpu(struct ring_buffer *buffer, int cpu);
-
-unsigned long ring_buffer_oldest_event_ts(struct ring_buffer *buffer, int cpu);
-unsigned long ring_buffer_bytes_cpu(struct ring_buffer *buffer, int cpu);
-unsigned long ring_buffer_entries(struct ring_buffer *buffer);
-unsigned long ring_buffer_overruns(struct ring_buffer *buffer);
-unsigned long ring_buffer_entries_cpu(struct ring_buffer *buffer, int cpu);
-unsigned long ring_buffer_overrun_cpu(struct ring_buffer *buffer, int cpu);
-unsigned long ring_buffer_commit_overrun_cpu(struct ring_buffer *buffer, int cpu);
-
-u64 ring_buffer_time_stamp(struct ring_buffer *buffer, int cpu);
-void ring_buffer_normalize_time_stamp(struct ring_buffer *buffer,
-				      int cpu, u64 *ts);
-void ring_buffer_set_clock(struct ring_buffer *buffer,
-			   u64 (*clock)(void));
-
-size_t ring_buffer_page_len(void *page);
-
-
-void *ring_buffer_alloc_read_page(struct ring_buffer *buffer, int cpu);
-void ring_buffer_free_read_page(struct ring_buffer *buffer, void *data);
-int ring_buffer_read_page(struct ring_buffer *buffer, void **data_page,
-			  size_t len, int cpu, int full);
-
-struct trace_seq;
-
-int ring_buffer_print_entry_header(struct trace_seq *s);
-int ring_buffer_print_page_header(struct trace_seq *s);
-
-enum ring_buffer_flags {
-	RB_FL_OVERWRITE		= 1 << 0,
-};
-
-#endif /* _LINUX_RING_BUFFER_H */
diff --git a/ANDROID_3.4.5/include/linux/rio.h b/ANDROID_3.4.5/include/linux/rio.h
deleted file mode 100644
index 4d506111..00000000
--- a/ANDROID_3.4.5/include/linux/rio.h
+++ /dev/null
@@ -1,405 +0,0 @@
-/*
- * RapidIO interconnect services
- * (RapidIO Interconnect Specification, http://www.rapidio.org)
- *
- * Copyright 2005 MontaVista Software, Inc.
- * Matt Porter <mporter@kernel.crashing.org>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#ifndef LINUX_RIO_H
-#define LINUX_RIO_H
-
-#include <linux/types.h>
-#include <linux/ioport.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/device.h>
-#include <linux/rio_regs.h>
-
-#define RIO_NO_HOPCOUNT		-1
-#define RIO_INVALID_DESTID	0xffff
-
-#define RIO_MAX_MPORTS		8
-#define RIO_MAX_MPORT_RESOURCES	16
-#define RIO_MAX_DEV_RESOURCES	16
-
-#define RIO_GLOBAL_TABLE	0xff	/* Indicates access of a switch's
-					   global routing table if it
-					   has multiple (or per port)
-					   tables */
-
-#define RIO_INVALID_ROUTE	0xff	/* Indicates that a route table
-					   entry is invalid (no route
-					   exists for the device ID) */
-
-#define RIO_MAX_ROUTE_ENTRIES(size)	(size ? (1 << 16) : (1 << 8))
-#define RIO_ANY_DESTID(size)		(size ? 0xffff : 0xff)
-
-#define RIO_MAX_MBOX		4
-#define RIO_MAX_MSG_SIZE	0x1000
-
-/*
- * Error values that may be returned by RIO functions.
- */
-#define RIO_SUCCESSFUL			0x00
-#define RIO_BAD_SIZE			0x81
-
-/*
- * For RIO devices, the region numbers are assigned this way:
- *
- *	0	RapidIO outbound doorbells
- *      1-15	RapidIO memory regions
- *
- * For RIO master ports, the region number are assigned this way:
- *
- *	0	RapidIO inbound doorbells
- *	1	RapidIO inbound mailboxes
- *	1	RapidIO outbound mailboxes
- */
-#define RIO_DOORBELL_RESOURCE	0
-#define RIO_INB_MBOX_RESOURCE	1
-#define RIO_OUTB_MBOX_RESOURCE	2
-
-#define RIO_PW_MSG_SIZE		64
-
-/*
- * A component tag value (stored in the component tag CSR) is used as device's
- * unique identifier assigned during enumeration. Besides being used for
- * identifying switches (which do not have device ID register), it also is used
- * by error management notification and therefore has to be assigned
- * to endpoints as well.
- */
-#define RIO_CTAG_RESRVD	0xfffe0000 /* Reserved */
-#define RIO_CTAG_UDEVID	0x0001ffff /* Unique device identifier */
-
-extern struct bus_type rio_bus_type;
-extern struct device rio_bus;
-extern struct list_head rio_devices;	/* list of all devices */
-
-struct rio_mport;
-struct rio_dev;
-union rio_pw_msg;
-
-/**
- * struct rio_switch - RIO switch info
- * @node: Node in global list of switches
- * @switchid: Switch ID that is unique across a network
- * @route_table: Copy of switch routing table
- * @port_ok: Status of each port (one bit per port) - OK=1 or UNINIT=0
- * @add_entry: Callback for switch-specific route add function
- * @get_entry: Callback for switch-specific route get function
- * @clr_table: Callback for switch-specific clear route table function
- * @set_domain: Callback for switch-specific domain setting function
- * @get_domain: Callback for switch-specific domain get function
- * @em_init: Callback for switch-specific error management init function
- * @em_handle: Callback for switch-specific error management handler function
- * @sw_sysfs: Callback that initializes switch-specific sysfs attributes
- * @nextdev: Array of per-port pointers to the next attached device
- */
-struct rio_switch {
-	struct list_head node;
-	u16 switchid;
-	u8 *route_table;
-	u32 port_ok;
-	int (*add_entry) (struct rio_mport *mport, u16 destid, u8 hopcount,
-			  u16 table, u16 route_destid, u8 route_port);
-	int (*get_entry) (struct rio_mport *mport, u16 destid, u8 hopcount,
-			  u16 table, u16 route_destid, u8 *route_port);
-	int (*clr_table) (struct rio_mport *mport, u16 destid, u8 hopcount,
-			  u16 table);
-	int (*set_domain) (struct rio_mport *mport, u16 destid, u8 hopcount,
-			   u8 sw_domain);
-	int (*get_domain) (struct rio_mport *mport, u16 destid, u8 hopcount,
-			   u8 *sw_domain);
-	int (*em_init) (struct rio_dev *dev);
-	int (*em_handle) (struct rio_dev *dev, u8 swport);
-	int (*sw_sysfs) (struct rio_dev *dev, int create);
-	struct rio_dev *nextdev[0];
-};
-
-/**
- * struct rio_dev - RIO device info
- * @global_list: Node in list of all RIO devices
- * @net_list: Node in list of RIO devices in a network
- * @net: Network this device is a part of
- * @did: Device ID
- * @vid: Vendor ID
- * @device_rev: Device revision
- * @asm_did: Assembly device ID
- * @asm_vid: Assembly vendor ID
- * @asm_rev: Assembly revision
- * @efptr: Extended feature pointer
- * @pef: Processing element features
- * @swpinfo: Switch port info
- * @src_ops: Source operation capabilities
- * @dst_ops: Destination operation capabilities
- * @comp_tag: RIO component tag
- * @phys_efptr: RIO device extended features pointer
- * @em_efptr: RIO Error Management features pointer
- * @dma_mask: Mask of bits of RIO address this device implements
- * @driver: Driver claiming this device
- * @dev: Device model device
- * @riores: RIO resources this device owns
- * @pwcback: port-write callback function for this device
- * @destid: Network destination ID (or associated destid for switch)
- * @hopcount: Hopcount to this device
- * @prev: Previous RIO device connected to the current one
- * @rswitch: struct rio_switch (if valid for this device)
- */
-struct rio_dev {
-	struct list_head global_list;	/* node in list of all RIO devices */
-	struct list_head net_list;	/* node in per net list */
-	struct rio_net *net;	/* RIO net this device resides in */
-	u16 did;
-	u16 vid;
-	u32 device_rev;
-	u16 asm_did;
-	u16 asm_vid;
-	u16 asm_rev;
-	u16 efptr;
-	u32 pef;
-	u32 swpinfo;
-	u32 src_ops;
-	u32 dst_ops;
-	u32 comp_tag;
-	u32 phys_efptr;
-	u32 em_efptr;
-	u64 dma_mask;
-	struct rio_driver *driver;	/* RIO driver claiming this device */
-	struct device dev;	/* LDM device structure */
-	struct resource riores[RIO_MAX_DEV_RESOURCES];
-	int (*pwcback) (struct rio_dev *rdev, union rio_pw_msg *msg, int step);
-	u16 destid;
-	u8 hopcount;
-	struct rio_dev *prev;
-	struct rio_switch rswitch[0];	/* RIO switch info */
-};
-
-#define rio_dev_g(n) list_entry(n, struct rio_dev, global_list)
-#define rio_dev_f(n) list_entry(n, struct rio_dev, net_list)
-#define	to_rio_dev(n) container_of(n, struct rio_dev, dev)
-#define sw_to_rio_dev(n) container_of(n, struct rio_dev, rswitch[0])
-
-/**
- * struct rio_msg - RIO message event
- * @res: Mailbox resource
- * @mcback: Message event callback
- */
-struct rio_msg {
-	struct resource *res;
-	void (*mcback) (struct rio_mport * mport, void *dev_id, int mbox, int slot);
-};
-
-/**
- * struct rio_dbell - RIO doorbell event
- * @node: Node in list of doorbell events
- * @res: Doorbell resource
- * @dinb: Doorbell event callback
- * @dev_id: Device specific pointer to pass on event
- */
-struct rio_dbell {
-	struct list_head node;
-	struct resource *res;
-	void (*dinb) (struct rio_mport *mport, void *dev_id, u16 src, u16 dst, u16 info);
-	void *dev_id;
-};
-
-enum rio_phy_type {
-	RIO_PHY_PARALLEL,
-	RIO_PHY_SERIAL,
-};
-
-/**
- * struct rio_mport - RIO master port info
- * @dbells: List of doorbell events
- * @node: Node in global list of master ports
- * @nnode: Node in network list of master ports
- * @iores: I/O mem resource that this master port interface owns
- * @riores: RIO resources that this master port interfaces owns
- * @inb_msg: RIO inbound message event descriptors
- * @outb_msg: RIO outbound message event descriptors
- * @host_deviceid: Host device ID associated with this master port
- * @ops: configuration space functions
- * @id: Port ID, unique among all ports
- * @index: Port index, unique among all port interfaces of the same type
- * @sys_size: RapidIO common transport system size
- * @phy_type: RapidIO phy type
- * @phys_efptr: RIO port extended features pointer
- * @name: Port name string
- * @priv: Master port private data
- */
-struct rio_mport {
-	struct list_head dbells;	/* list of doorbell events */
-	struct list_head node;	/* node in global list of ports */
-	struct list_head nnode;	/* node in net list of ports */
-	struct resource iores;
-	struct resource riores[RIO_MAX_MPORT_RESOURCES];
-	struct rio_msg inb_msg[RIO_MAX_MBOX];
-	struct rio_msg outb_msg[RIO_MAX_MBOX];
-	int host_deviceid;	/* Host device ID */
-	struct rio_ops *ops;	/* low-level architecture-dependent routines */
-	unsigned char id;	/* port ID, unique among all ports */
-	unsigned char index;	/* port index, unique among all port
-				   interfaces of the same type */
-	unsigned int sys_size;	/* RapidIO common transport system size.
-				 * 0 - Small size. 256 devices.
-				 * 1 - Large size, 65536 devices.
-				 */
-	enum rio_phy_type phy_type;	/* RapidIO phy type */
-	u32 phys_efptr;
-	unsigned char name[40];
-	void *priv;		/* Master port private data */
-};
-
-/**
- * struct rio_net - RIO network info
- * @node: Node in global list of RIO networks
- * @devices: List of devices in this network
- * @mports: List of master ports accessing this network
- * @hport: Default port for accessing this network
- * @id: RIO network ID
- */
-struct rio_net {
-	struct list_head node;	/* node in list of networks */
-	struct list_head devices;	/* list of devices in this net */
-	struct list_head mports;	/* list of ports accessing net */
-	struct rio_mport *hport;	/* primary port for accessing net */
-	unsigned char id;	/* RIO network ID */
-};
-
-/* Definitions used by switch sysfs initialization callback */
-#define RIO_SW_SYSFS_CREATE	1	/* Create switch attributes */
-#define RIO_SW_SYSFS_REMOVE	0	/* Remove switch attributes */
-
-/* Low-level architecture-dependent routines */
-
-/**
- * struct rio_ops - Low-level RIO configuration space operations
- * @lcread: Callback to perform local (master port) read of config space.
- * @lcwrite: Callback to perform local (master port) write of config space.
- * @cread: Callback to perform network read of config space.
- * @cwrite: Callback to perform network write of config space.
- * @dsend: Callback to send a doorbell message.
- * @pwenable: Callback to enable/disable port-write message handling.
- * @open_outb_mbox: Callback to initialize outbound mailbox.
- * @close_outb_mbox: Callback to shut down outbound mailbox.
- * @open_inb_mbox: Callback to initialize inbound mailbox.
- * @close_inb_mbox: Callback to	shut down inbound mailbox.
- * @add_outb_message: Callback to add a message to an outbound mailbox queue.
- * @add_inb_buffer: Callback to	add a buffer to an inbound mailbox queue.
- * @get_inb_message: Callback to get a message from an inbound mailbox queue.
- */
-struct rio_ops {
-	int (*lcread) (struct rio_mport *mport, int index, u32 offset, int len,
-			u32 *data);
-	int (*lcwrite) (struct rio_mport *mport, int index, u32 offset, int len,
-			u32 data);
-	int (*cread) (struct rio_mport *mport, int index, u16 destid,
-			u8 hopcount, u32 offset, int len, u32 *data);
-	int (*cwrite) (struct rio_mport *mport, int index, u16 destid,
-			u8 hopcount, u32 offset, int len, u32 data);
-	int (*dsend) (struct rio_mport *mport, int index, u16 destid, u16 data);
-	int (*pwenable) (struct rio_mport *mport, int enable);
-	int (*open_outb_mbox)(struct rio_mport *mport, void *dev_id,
-			      int mbox, int entries);
-	void (*close_outb_mbox)(struct rio_mport *mport, int mbox);
-	int  (*open_inb_mbox)(struct rio_mport *mport, void *dev_id,
-			     int mbox, int entries);
-	void (*close_inb_mbox)(struct rio_mport *mport, int mbox);
-	int  (*add_outb_message)(struct rio_mport *mport, struct rio_dev *rdev,
-				 int mbox, void *buffer, size_t len);
-	int (*add_inb_buffer)(struct rio_mport *mport, int mbox, void *buf);
-	void *(*get_inb_message)(struct rio_mport *mport, int mbox);
-};
-
-#define RIO_RESOURCE_MEM	0x00000100
-#define RIO_RESOURCE_DOORBELL	0x00000200
-#define RIO_RESOURCE_MAILBOX	0x00000400
-
-#define RIO_RESOURCE_CACHEABLE	0x00010000
-#define RIO_RESOURCE_PCI	0x00020000
-
-#define RIO_RESOURCE_BUSY	0x80000000
-
-/**
- * struct rio_driver - RIO driver info
- * @node: Node in list of drivers
- * @name: RIO driver name
- * @id_table: RIO device ids to be associated with this driver
- * @probe: RIO device inserted
- * @remove: RIO device removed
- * @suspend: RIO device suspended
- * @resume: RIO device awakened
- * @enable_wake: RIO device enable wake event
- * @driver: LDM driver struct
- *
- * Provides info on a RIO device driver for insertion/removal and
- * power management purposes.
- */
-struct rio_driver {
-	struct list_head node;
-	char *name;
-	const struct rio_device_id *id_table;
-	int (*probe) (struct rio_dev * dev, const struct rio_device_id * id);
-	void (*remove) (struct rio_dev * dev);
-	int (*suspend) (struct rio_dev * dev, u32 state);
-	int (*resume) (struct rio_dev * dev);
-	int (*enable_wake) (struct rio_dev * dev, u32 state, int enable);
-	struct device_driver driver;
-};
-
-#define	to_rio_driver(drv) container_of(drv,struct rio_driver, driver)
-
-/**
- * struct rio_device_id - RIO device identifier
- * @did: RIO device ID
- * @vid: RIO vendor ID
- * @asm_did: RIO assembly device ID
- * @asm_vid: RIO assembly vendor ID
- *
- * Identifies a RIO device based on both the device/vendor IDs and
- * the assembly device/vendor IDs.
- */
-struct rio_device_id {
-	u16 did, vid;
-	u16 asm_did, asm_vid;
-};
-
-/**
- * struct rio_switch_ops - Per-switch operations
- * @vid: RIO vendor ID
- * @did: RIO device ID
- * @init_hook: Callback that performs switch device initialization
- *
- * Defines the operations that are necessary to initialize/control
- * a particular RIO switch device.
- */
-struct rio_switch_ops {
-	u16 vid, did;
-	int (*init_hook) (struct rio_dev *rdev, int do_enum);
-};
-
-union rio_pw_msg {
-	struct {
-		u32 comptag;	/* Component Tag CSR */
-		u32 errdetect;	/* Port N Error Detect CSR */
-		u32 is_port;	/* Implementation specific + PortID */
-		u32 ltlerrdet;	/* LTL Error Detect CSR */
-		u32 padding[12];
-	} em;
-	u32 raw[RIO_PW_MSG_SIZE/sizeof(u32)];
-};
-
-/* Architecture and hardware-specific functions */
-extern int rio_register_mport(struct rio_mport *);
-extern int rio_open_inb_mbox(struct rio_mport *, void *, int, int);
-extern void rio_close_inb_mbox(struct rio_mport *, int);
-extern int rio_open_outb_mbox(struct rio_mport *, void *, int, int);
-extern void rio_close_outb_mbox(struct rio_mport *, int);
-
-#endif				/* LINUX_RIO_H */
diff --git a/ANDROID_3.4.5/include/linux/rio_drv.h b/ANDROID_3.4.5/include/linux/rio_drv.h
deleted file mode 100644
index 7f07470e..00000000
--- a/ANDROID_3.4.5/include/linux/rio_drv.h
+++ /dev/null
@@ -1,423 +0,0 @@
-/*
- * RapidIO driver services
- *
- * Copyright 2005 MontaVista Software, Inc.
- * Matt Porter <mporter@kernel.crashing.org>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#ifndef LINUX_RIO_DRV_H
-#define LINUX_RIO_DRV_H
-
-#include <linux/types.h>
-#include <linux/ioport.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/string.h>
-#include <linux/rio.h>
-
-extern int __rio_local_read_config_32(struct rio_mport *port, u32 offset,
-				      u32 * data);
-extern int __rio_local_write_config_32(struct rio_mport *port, u32 offset,
-				       u32 data);
-extern int __rio_local_read_config_16(struct rio_mport *port, u32 offset,
-				      u16 * data);
-extern int __rio_local_write_config_16(struct rio_mport *port, u32 offset,
-				       u16 data);
-extern int __rio_local_read_config_8(struct rio_mport *port, u32 offset,
-				     u8 * data);
-extern int __rio_local_write_config_8(struct rio_mport *port, u32 offset,
-				      u8 data);
-
-extern int rio_mport_read_config_32(struct rio_mport *port, u16 destid,
-				    u8 hopcount, u32 offset, u32 * data);
-extern int rio_mport_write_config_32(struct rio_mport *port, u16 destid,
-				     u8 hopcount, u32 offset, u32 data);
-extern int rio_mport_read_config_16(struct rio_mport *port, u16 destid,
-				    u8 hopcount, u32 offset, u16 * data);
-extern int rio_mport_write_config_16(struct rio_mport *port, u16 destid,
-				     u8 hopcount, u32 offset, u16 data);
-extern int rio_mport_read_config_8(struct rio_mport *port, u16 destid,
-				   u8 hopcount, u32 offset, u8 * data);
-extern int rio_mport_write_config_8(struct rio_mport *port, u16 destid,
-				    u8 hopcount, u32 offset, u8 data);
-
-/**
- * rio_local_read_config_32 - Read 32 bits from local configuration space
- * @port: Master port
- * @offset: Offset into local configuration space
- * @data: Pointer to read data into
- *
- * Reads 32 bits of data from the specified offset within the local
- * device's configuration space.
- */
-static inline int rio_local_read_config_32(struct rio_mport *port, u32 offset,
-					   u32 * data)
-{
-	return __rio_local_read_config_32(port, offset, data);
-}
-
-/**
- * rio_local_write_config_32 - Write 32 bits to local configuration space
- * @port: Master port
- * @offset: Offset into local configuration space
- * @data: Data to be written
- *
- * Writes 32 bits of data to the specified offset within the local
- * device's configuration space.
- */
-static inline int rio_local_write_config_32(struct rio_mport *port, u32 offset,
-					    u32 data)
-{
-	return __rio_local_write_config_32(port, offset, data);
-}
-
-/**
- * rio_local_read_config_16 - Read 16 bits from local configuration space
- * @port: Master port
- * @offset: Offset into local configuration space
- * @data: Pointer to read data into
- *
- * Reads 16 bits of data from the specified offset within the local
- * device's configuration space.
- */
-static inline int rio_local_read_config_16(struct rio_mport *port, u32 offset,
-					   u16 * data)
-{
-	return __rio_local_read_config_16(port, offset, data);
-}
-
-/**
- * rio_local_write_config_16 - Write 16 bits to local configuration space
- * @port: Master port
- * @offset: Offset into local configuration space
- * @data: Data to be written
- *
- * Writes 16 bits of data to the specified offset within the local
- * device's configuration space.
- */
-
-static inline int rio_local_write_config_16(struct rio_mport *port, u32 offset,
-					    u16 data)
-{
-	return __rio_local_write_config_16(port, offset, data);
-}
-
-/**
- * rio_local_read_config_8 - Read 8 bits from local configuration space
- * @port: Master port
- * @offset: Offset into local configuration space
- * @data: Pointer to read data into
- *
- * Reads 8 bits of data from the specified offset within the local
- * device's configuration space.
- */
-static inline int rio_local_read_config_8(struct rio_mport *port, u32 offset,
-					  u8 * data)
-{
-	return __rio_local_read_config_8(port, offset, data);
-}
-
-/**
- * rio_local_write_config_8 - Write 8 bits to local configuration space
- * @port: Master port
- * @offset: Offset into local configuration space
- * @data: Data to be written
- *
- * Writes 8 bits of data to the specified offset within the local
- * device's configuration space.
- */
-static inline int rio_local_write_config_8(struct rio_mport *port, u32 offset,
-					   u8 data)
-{
-	return __rio_local_write_config_8(port, offset, data);
-}
-
-/**
- * rio_read_config_32 - Read 32 bits from configuration space
- * @rdev: RIO device
- * @offset: Offset into device configuration space
- * @data: Pointer to read data into
- *
- * Reads 32 bits of data from the specified offset within the
- * RIO device's configuration space.
- */
-static inline int rio_read_config_32(struct rio_dev *rdev, u32 offset,
-				     u32 * data)
-{
-	return rio_mport_read_config_32(rdev->net->hport, rdev->destid,
-					rdev->hopcount, offset, data);
-};
-
-/**
- * rio_write_config_32 - Write 32 bits to configuration space
- * @rdev: RIO device
- * @offset: Offset into device configuration space
- * @data: Data to be written
- *
- * Writes 32 bits of data to the specified offset within the
- * RIO device's configuration space.
- */
-static inline int rio_write_config_32(struct rio_dev *rdev, u32 offset,
-				      u32 data)
-{
-	return rio_mport_write_config_32(rdev->net->hport, rdev->destid,
-					 rdev->hopcount, offset, data);
-};
-
-/**
- * rio_read_config_16 - Read 16 bits from configuration space
- * @rdev: RIO device
- * @offset: Offset into device configuration space
- * @data: Pointer to read data into
- *
- * Reads 16 bits of data from the specified offset within the
- * RIO device's configuration space.
- */
-static inline int rio_read_config_16(struct rio_dev *rdev, u32 offset,
-				     u16 * data)
-{
-	return rio_mport_read_config_16(rdev->net->hport, rdev->destid,
-					rdev->hopcount, offset, data);
-};
-
-/**
- * rio_write_config_16 - Write 16 bits to configuration space
- * @rdev: RIO device
- * @offset: Offset into device configuration space
- * @data: Data to be written
- *
- * Writes 16 bits of data to the specified offset within the
- * RIO device's configuration space.
- */
-static inline int rio_write_config_16(struct rio_dev *rdev, u32 offset,
-				      u16 data)
-{
-	return rio_mport_write_config_16(rdev->net->hport, rdev->destid,
-					 rdev->hopcount, offset, data);
-};
-
-/**
- * rio_read_config_8 - Read 8 bits from configuration space
- * @rdev: RIO device
- * @offset: Offset into device configuration space
- * @data: Pointer to read data into
- *
- * Reads 8 bits of data from the specified offset within the
- * RIO device's configuration space.
- */
-static inline int rio_read_config_8(struct rio_dev *rdev, u32 offset, u8 * data)
-{
-	return rio_mport_read_config_8(rdev->net->hport, rdev->destid,
-				       rdev->hopcount, offset, data);
-};
-
-/**
- * rio_write_config_8 - Write 8 bits to configuration space
- * @rdev: RIO device
- * @offset: Offset into device configuration space
- * @data: Data to be written
- *
- * Writes 8 bits of data to the specified offset within the
- * RIO device's configuration space.
- */
-static inline int rio_write_config_8(struct rio_dev *rdev, u32 offset, u8 data)
-{
-	return rio_mport_write_config_8(rdev->net->hport, rdev->destid,
-					rdev->hopcount, offset, data);
-};
-
-extern int rio_mport_send_doorbell(struct rio_mport *mport, u16 destid,
-				   u16 data);
-
-/**
- * rio_send_doorbell - Send a doorbell message to a device
- * @rdev: RIO device
- * @data: Doorbell message data
- *
- * Send a doorbell message to a RIO device. The doorbell message
- * has a 16-bit info field provided by the @data argument.
- */
-static inline int rio_send_doorbell(struct rio_dev *rdev, u16 data)
-{
-	return rio_mport_send_doorbell(rdev->net->hport, rdev->destid, data);
-};
-
-/**
- * rio_init_mbox_res - Initialize a RIO mailbox resource
- * @res: resource struct
- * @start: start of mailbox range
- * @end: end of mailbox range
- *
- * This function is used to initialize the fields of a resource
- * for use as a mailbox resource.  It initializes a range of
- * mailboxes using the start and end arguments.
- */
-static inline void rio_init_mbox_res(struct resource *res, int start, int end)
-{
-	memset(res, 0, sizeof(struct resource));
-	res->start = start;
-	res->end = end;
-	res->flags = RIO_RESOURCE_MAILBOX;
-}
-
-/**
- * rio_init_dbell_res - Initialize a RIO doorbell resource
- * @res: resource struct
- * @start: start of doorbell range
- * @end: end of doorbell range
- *
- * This function is used to initialize the fields of a resource
- * for use as a doorbell resource.  It initializes a range of
- * doorbell messages using the start and end arguments.
- */
-static inline void rio_init_dbell_res(struct resource *res, u16 start, u16 end)
-{
-	memset(res, 0, sizeof(struct resource));
-	res->start = start;
-	res->end = end;
-	res->flags = RIO_RESOURCE_DOORBELL;
-}
-
-/**
- * RIO_DEVICE - macro used to describe a specific RIO device
- * @dev: the 16 bit RIO device ID
- * @ven: the 16 bit RIO vendor ID
- *
- * This macro is used to create a struct rio_device_id that matches a
- * specific device.  The assembly vendor and assembly device fields
- * will be set to %RIO_ANY_ID.
- */
-#define RIO_DEVICE(dev,ven) \
-	.did = (dev), .vid = (ven), \
-	.asm_did = RIO_ANY_ID, .asm_vid = RIO_ANY_ID
-
-/* Mailbox management */
-extern int rio_request_outb_mbox(struct rio_mport *, void *, int, int,
-				 void (*)(struct rio_mport *, void *,int, int));
-extern int rio_release_outb_mbox(struct rio_mport *, int);
-
-/**
- * rio_add_outb_message - Add RIO message to an outbound mailbox queue
- * @mport: RIO master port containing the outbound queue
- * @rdev: RIO device the message is be sent to
- * @mbox: The outbound mailbox queue
- * @buffer: Pointer to the message buffer
- * @len: Length of the message buffer
- *
- * Adds a RIO message buffer to an outbound mailbox queue for
- * transmission. Returns 0 on success.
- */
-static inline int rio_add_outb_message(struct rio_mport *mport,
-				       struct rio_dev *rdev, int mbox,
-				       void *buffer, size_t len)
-{
-	return mport->ops->add_outb_message(mport, rdev, mbox,
-						   buffer, len);
-}
-
-extern int rio_request_inb_mbox(struct rio_mport *, void *, int, int,
-				void (*)(struct rio_mport *, void *, int, int));
-extern int rio_release_inb_mbox(struct rio_mport *, int);
-
-/**
- * rio_add_inb_buffer - Add buffer to an inbound mailbox queue
- * @mport: Master port containing the inbound mailbox
- * @mbox: The inbound mailbox number
- * @buffer: Pointer to the message buffer
- *
- * Adds a buffer to an inbound mailbox queue for reception. Returns
- * 0 on success.
- */
-static inline int rio_add_inb_buffer(struct rio_mport *mport, int mbox,
-				     void *buffer)
-{
-	return mport->ops->add_inb_buffer(mport, mbox, buffer);
-}
-
-/**
- * rio_get_inb_message - Get A RIO message from an inbound mailbox queue
- * @mport: Master port containing the inbound mailbox
- * @mbox: The inbound mailbox number
- *
- * Get a RIO message from an inbound mailbox queue. Returns 0 on success.
- */
-static inline void *rio_get_inb_message(struct rio_mport *mport, int mbox)
-{
-	return mport->ops->get_inb_message(mport, mbox);
-}
-
-/* Doorbell management */
-extern int rio_request_inb_dbell(struct rio_mport *, void *, u16, u16,
-				 void (*)(struct rio_mport *, void *, u16, u16, u16));
-extern int rio_release_inb_dbell(struct rio_mport *, u16, u16);
-extern struct resource *rio_request_outb_dbell(struct rio_dev *, u16, u16);
-extern int rio_release_outb_dbell(struct rio_dev *, struct resource *);
-
-/* Memory region management */
-int rio_claim_resource(struct rio_dev *, int);
-int rio_request_regions(struct rio_dev *, char *);
-void rio_release_regions(struct rio_dev *);
-int rio_request_region(struct rio_dev *, int, char *);
-void rio_release_region(struct rio_dev *, int);
-
-/* Port-Write management */
-extern int rio_request_inb_pwrite(struct rio_dev *,
-			int (*)(struct rio_dev *, union rio_pw_msg*, int));
-extern int rio_release_inb_pwrite(struct rio_dev *);
-extern int rio_inb_pwrite_handler(union rio_pw_msg *pw_msg);
-
-/* LDM support */
-int rio_register_driver(struct rio_driver *);
-void rio_unregister_driver(struct rio_driver *);
-struct rio_dev *rio_dev_get(struct rio_dev *);
-void rio_dev_put(struct rio_dev *);
-
-/**
- * rio_name - Get the unique RIO device identifier
- * @rdev: RIO device
- *
- * Get the unique RIO device identifier. Returns the device
- * identifier string.
- */
-static inline const char *rio_name(struct rio_dev *rdev)
-{
-	return dev_name(&rdev->dev);
-}
-
-/**
- * rio_get_drvdata - Get RIO driver specific data
- * @rdev: RIO device
- *
- * Get RIO driver specific data. Returns a pointer to the
- * driver specific data.
- */
-static inline void *rio_get_drvdata(struct rio_dev *rdev)
-{
-	return dev_get_drvdata(&rdev->dev);
-}
-
-/**
- * rio_set_drvdata - Set RIO driver specific data
- * @rdev: RIO device
- * @data: Pointer to driver specific data
- *
- * Set RIO driver specific data. device struct driver data pointer
- * is set to the @data argument.
- */
-static inline void rio_set_drvdata(struct rio_dev *rdev, void *data)
-{
-	dev_set_drvdata(&rdev->dev, data);
-}
-
-/* Misc driver helpers */
-extern u16 rio_local_get_device_id(struct rio_mport *port);
-extern struct rio_dev *rio_get_device(u16 vid, u16 did, struct rio_dev *from);
-extern struct rio_dev *rio_get_asm(u16 vid, u16 did, u16 asm_vid, u16 asm_did,
-				   struct rio_dev *from);
-
-#endif				/* LINUX_RIO_DRV_H */
diff --git a/ANDROID_3.4.5/include/linux/rio_ids.h b/ANDROID_3.4.5/include/linux/rio_ids.h
deleted file mode 100644
index b66d13d1..00000000
--- a/ANDROID_3.4.5/include/linux/rio_ids.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- * RapidIO devices
- *
- * Copyright 2005 MontaVista Software, Inc.
- * Matt Porter <mporter@kernel.crashing.org>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#ifndef LINUX_RIO_IDS_H
-#define LINUX_RIO_IDS_H
-
-#define RIO_ANY_ID			0xffff
-
-#define RIO_VID_FREESCALE		0x0002
-#define RIO_DID_MPC8560			0x0003
-
-#define RIO_VID_TUNDRA			0x000d
-#define RIO_DID_TSI500			0x0500
-#define RIO_DID_TSI568			0x0568
-#define RIO_DID_TSI572			0x0572
-#define RIO_DID_TSI574			0x0574
-#define RIO_DID_TSI576			0x0578 /* Same ID as Tsi578 */
-#define RIO_DID_TSI577			0x0577
-#define RIO_DID_TSI578			0x0578
-
-#define RIO_VID_IDT			0x0038
-#define RIO_DID_IDT70K200		0x0310
-#define RIO_DID_IDTCPS8			0x035c
-#define RIO_DID_IDTCPS12		0x035d
-#define RIO_DID_IDTCPS16		0x035b
-#define RIO_DID_IDTCPS6Q		0x035f
-#define RIO_DID_IDTCPS10Q		0x035e
-#define RIO_DID_IDTCPS1848		0x0374
-#define RIO_DID_IDTCPS1432		0x0375
-#define RIO_DID_IDTCPS1616		0x0379
-#define RIO_DID_IDTVPS1616		0x0377
-#define RIO_DID_IDTSPS1616		0x0378
-#define RIO_DID_TSI721			0x80ab
-
-#endif				/* LINUX_RIO_IDS_H */
diff --git a/ANDROID_3.4.5/include/linux/rio_regs.h b/ANDROID_3.4.5/include/linux/rio_regs.h
deleted file mode 100644
index 218168a2..00000000
--- a/ANDROID_3.4.5/include/linux/rio_regs.h
+++ /dev/null
@@ -1,295 +0,0 @@
-/*
- * RapidIO register definitions
- *
- * Copyright 2005 MontaVista Software, Inc.
- * Matt Porter <mporter@kernel.crashing.org>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#ifndef LINUX_RIO_REGS_H
-#define LINUX_RIO_REGS_H
-
-/*
- * In RapidIO, each device has a 16MB configuration space that is
- * accessed via maintenance transactions.  Portions of configuration
- * space are standardized and/or reserved.
- */
-#define RIO_MAINT_SPACE_SZ	0x1000000 /* 16MB of RapidIO mainenance space */
-
-#define RIO_DEV_ID_CAR		0x00	/* [I] Device Identity CAR */
-#define RIO_DEV_INFO_CAR	0x04	/* [I] Device Information CAR */
-#define RIO_ASM_ID_CAR		0x08	/* [I] Assembly Identity CAR */
-#define  RIO_ASM_ID_MASK		0xffff0000	/* [I] Asm ID Mask */
-#define  RIO_ASM_VEN_ID_MASK		0x0000ffff	/* [I] Asm Vend Mask */
-
-#define RIO_ASM_INFO_CAR	0x0c	/* [I] Assembly Information CAR */
-#define  RIO_ASM_REV_MASK		0xffff0000	/* [I] Asm Rev Mask */
-#define  RIO_EXT_FTR_PTR_MASK		0x0000ffff	/* [I] EF_PTR Mask */
-
-#define RIO_PEF_CAR		0x10	/* [I] Processing Element Features CAR */
-#define  RIO_PEF_BRIDGE			0x80000000	/* [I] Bridge */
-#define  RIO_PEF_MEMORY			0x40000000	/* [I] MMIO */
-#define  RIO_PEF_PROCESSOR		0x20000000	/* [I] Processor */
-#define  RIO_PEF_SWITCH			0x10000000	/* [I] Switch */
-#define  RIO_PEF_MULTIPORT		0x08000000	/* [VI, 2.1] Multiport */
-#define  RIO_PEF_INB_MBOX		0x00f00000	/* [II, <= 1.2] Mailboxes */
-#define  RIO_PEF_INB_MBOX0		0x00800000	/* [II, <= 1.2] Mailbox 0 */
-#define  RIO_PEF_INB_MBOX1		0x00400000	/* [II, <= 1.2] Mailbox 1 */
-#define  RIO_PEF_INB_MBOX2		0x00200000	/* [II, <= 1.2] Mailbox 2 */
-#define  RIO_PEF_INB_MBOX3		0x00100000	/* [II, <= 1.2] Mailbox 3 */
-#define  RIO_PEF_INB_DOORBELL		0x00080000	/* [II, <= 1.2] Doorbells */
-#define  RIO_PEF_EXT_RT			0x00000200	/* [III, 1.3] Extended route table support */
-#define  RIO_PEF_STD_RT			0x00000100	/* [III, 1.3] Standard route table support */
-#define  RIO_PEF_CTLS			0x00000010	/* [III] CTLS */
-#define  RIO_PEF_EXT_FEATURES		0x00000008	/* [I] EFT_PTR valid */
-#define  RIO_PEF_ADDR_66		0x00000004	/* [I] 66 bits */
-#define  RIO_PEF_ADDR_50		0x00000002	/* [I] 50 bits */
-#define  RIO_PEF_ADDR_34		0x00000001	/* [I] 34 bits */
-
-#define RIO_SWP_INFO_CAR	0x14	/* [I] Switch Port Information CAR */
-#define  RIO_SWP_INFO_PORT_TOTAL_MASK	0x0000ff00	/* [I] Total number of ports */
-#define  RIO_SWP_INFO_PORT_NUM_MASK	0x000000ff	/* [I] Maintenance transaction port number */
-#define  RIO_GET_TOTAL_PORTS(x)		((x & RIO_SWP_INFO_PORT_TOTAL_MASK) >> 8)
-#define  RIO_GET_PORT_NUM(x)		(x & RIO_SWP_INFO_PORT_NUM_MASK)
-
-#define RIO_SRC_OPS_CAR		0x18	/* [I] Source Operations CAR */
-#define  RIO_SRC_OPS_READ		0x00008000	/* [I] Read op */
-#define  RIO_SRC_OPS_WRITE		0x00004000	/* [I] Write op */
-#define  RIO_SRC_OPS_STREAM_WRITE	0x00002000	/* [I] Str-write op */
-#define  RIO_SRC_OPS_WRITE_RESPONSE	0x00001000	/* [I] Write/resp op */
-#define  RIO_SRC_OPS_DATA_MSG		0x00000800	/* [II] Data msg op */
-#define  RIO_SRC_OPS_DOORBELL		0x00000400	/* [II] Doorbell op */
-#define  RIO_SRC_OPS_ATOMIC_TST_SWP	0x00000100	/* [I] Atomic TAS op */
-#define  RIO_SRC_OPS_ATOMIC_INC		0x00000080	/* [I] Atomic inc op */
-#define  RIO_SRC_OPS_ATOMIC_DEC		0x00000040	/* [I] Atomic dec op */
-#define  RIO_SRC_OPS_ATOMIC_SET		0x00000020	/* [I] Atomic set op */
-#define  RIO_SRC_OPS_ATOMIC_CLR		0x00000010	/* [I] Atomic clr op */
-#define  RIO_SRC_OPS_PORT_WRITE		0x00000004	/* [I] Port-write op */
-
-#define RIO_DST_OPS_CAR		0x1c	/* Destination Operations CAR */
-#define  RIO_DST_OPS_READ		0x00008000	/* [I] Read op */
-#define  RIO_DST_OPS_WRITE		0x00004000	/* [I] Write op */
-#define  RIO_DST_OPS_STREAM_WRITE	0x00002000	/* [I] Str-write op */
-#define  RIO_DST_OPS_WRITE_RESPONSE	0x00001000	/* [I] Write/resp op */
-#define  RIO_DST_OPS_DATA_MSG		0x00000800	/* [II] Data msg op */
-#define  RIO_DST_OPS_DOORBELL		0x00000400	/* [II] Doorbell op */
-#define  RIO_DST_OPS_ATOMIC_TST_SWP	0x00000100	/* [I] Atomic TAS op */
-#define  RIO_DST_OPS_ATOMIC_INC		0x00000080	/* [I] Atomic inc op */
-#define  RIO_DST_OPS_ATOMIC_DEC		0x00000040	/* [I] Atomic dec op */
-#define  RIO_DST_OPS_ATOMIC_SET		0x00000020	/* [I] Atomic set op */
-#define  RIO_DST_OPS_ATOMIC_CLR		0x00000010	/* [I] Atomic clr op */
-#define  RIO_DST_OPS_PORT_WRITE		0x00000004	/* [I] Port-write op */
-
-#define  RIO_OPS_READ			0x00008000	/* [I] Read op */
-#define  RIO_OPS_WRITE			0x00004000	/* [I] Write op */
-#define  RIO_OPS_STREAM_WRITE		0x00002000	/* [I] Str-write op */
-#define  RIO_OPS_WRITE_RESPONSE		0x00001000	/* [I] Write/resp op */
-#define  RIO_OPS_DATA_MSG		0x00000800	/* [II] Data msg op */
-#define  RIO_OPS_DOORBELL		0x00000400	/* [II] Doorbell op */
-#define  RIO_OPS_ATOMIC_TST_SWP		0x00000100	/* [I] Atomic TAS op */
-#define  RIO_OPS_ATOMIC_INC		0x00000080	/* [I] Atomic inc op */
-#define  RIO_OPS_ATOMIC_DEC		0x00000040	/* [I] Atomic dec op */
-#define  RIO_OPS_ATOMIC_SET		0x00000020	/* [I] Atomic set op */
-#define  RIO_OPS_ATOMIC_CLR		0x00000010	/* [I] Atomic clr op */
-#define  RIO_OPS_PORT_WRITE		0x00000004	/* [I] Port-write op */
-
-					/* 0x20-0x30 *//* Reserved */
-
-#define	RIO_SWITCH_RT_LIMIT	0x34	/* [III, 1.3] Switch Route Table Destination ID Limit CAR */
-#define	 RIO_RT_MAX_DESTID		0x0000ffff
-
-#define RIO_MBOX_CSR		0x40	/* [II, <= 1.2] Mailbox CSR */
-#define  RIO_MBOX0_AVAIL		0x80000000	/* [II] Mbox 0 avail */
-#define  RIO_MBOX0_FULL			0x40000000	/* [II] Mbox 0 full */
-#define  RIO_MBOX0_EMPTY		0x20000000	/* [II] Mbox 0 empty */
-#define  RIO_MBOX0_BUSY			0x10000000	/* [II] Mbox 0 busy */
-#define  RIO_MBOX0_FAIL			0x08000000	/* [II] Mbox 0 fail */
-#define  RIO_MBOX0_ERROR		0x04000000	/* [II] Mbox 0 error */
-#define  RIO_MBOX1_AVAIL		0x00800000	/* [II] Mbox 1 avail */
-#define  RIO_MBOX1_FULL			0x00200000	/* [II] Mbox 1 full */
-#define  RIO_MBOX1_EMPTY		0x00200000	/* [II] Mbox 1 empty */
-#define  RIO_MBOX1_BUSY			0x00100000	/* [II] Mbox 1 busy */
-#define  RIO_MBOX1_FAIL			0x00080000	/* [II] Mbox 1 fail */
-#define  RIO_MBOX1_ERROR		0x00040000	/* [II] Mbox 1 error */
-#define  RIO_MBOX2_AVAIL		0x00008000	/* [II] Mbox 2 avail */
-#define  RIO_MBOX2_FULL			0x00004000	/* [II] Mbox 2 full */
-#define  RIO_MBOX2_EMPTY		0x00002000	/* [II] Mbox 2 empty */
-#define  RIO_MBOX2_BUSY			0x00001000	/* [II] Mbox 2 busy */
-#define  RIO_MBOX2_FAIL			0x00000800	/* [II] Mbox 2 fail */
-#define  RIO_MBOX2_ERROR		0x00000400	/* [II] Mbox 2 error */
-#define  RIO_MBOX3_AVAIL		0x00000080	/* [II] Mbox 3 avail */
-#define  RIO_MBOX3_FULL			0x00000040	/* [II] Mbox 3 full */
-#define  RIO_MBOX3_EMPTY		0x00000020	/* [II] Mbox 3 empty */
-#define  RIO_MBOX3_BUSY			0x00000010	/* [II] Mbox 3 busy */
-#define  RIO_MBOX3_FAIL			0x00000008	/* [II] Mbox 3 fail */
-#define  RIO_MBOX3_ERROR		0x00000004	/* [II] Mbox 3 error */
-
-#define RIO_WRITE_PORT_CSR	0x44	/* [I, <= 1.2] Write Port CSR */
-#define RIO_DOORBELL_CSR	0x44	/* [II, <= 1.2] Doorbell CSR */
-#define  RIO_DOORBELL_AVAIL		0x80000000	/* [II] Doorbell avail */
-#define  RIO_DOORBELL_FULL		0x40000000	/* [II] Doorbell full */
-#define  RIO_DOORBELL_EMPTY		0x20000000	/* [II] Doorbell empty */
-#define  RIO_DOORBELL_BUSY		0x10000000	/* [II] Doorbell busy */
-#define  RIO_DOORBELL_FAILED		0x08000000	/* [II] Doorbell failed */
-#define  RIO_DOORBELL_ERROR		0x04000000	/* [II] Doorbell error */
-#define  RIO_WRITE_PORT_AVAILABLE	0x00000080	/* [I] Write Port Available */
-#define  RIO_WRITE_PORT_FULL		0x00000040	/* [I] Write Port Full */
-#define  RIO_WRITE_PORT_EMPTY		0x00000020	/* [I] Write Port Empty */
-#define  RIO_WRITE_PORT_BUSY		0x00000010	/* [I] Write Port Busy */
-#define  RIO_WRITE_PORT_FAILED		0x00000008	/* [I] Write Port Failed */
-#define  RIO_WRITE_PORT_ERROR		0x00000004	/* [I] Write Port Error */
-
-					/* 0x48 *//* Reserved */
-
-#define RIO_PELL_CTRL_CSR	0x4c	/* [I] PE Logical Layer Control CSR */
-#define   RIO_PELL_ADDR_66		0x00000004	/* [I] 66-bit addr */
-#define   RIO_PELL_ADDR_50		0x00000002	/* [I] 50-bit addr */
-#define   RIO_PELL_ADDR_34		0x00000001	/* [I] 34-bit addr */
-
-					/* 0x50-0x54 *//* Reserved */
-
-#define RIO_LCSH_BA		0x58	/* [I] LCS High Base Address */
-#define RIO_LCSL_BA		0x5c	/* [I] LCS Base Address */
-
-#define RIO_DID_CSR		0x60	/* [III] Base Device ID CSR */
-
-					/* 0x64 *//* Reserved */
-
-#define RIO_HOST_DID_LOCK_CSR	0x68	/* [III] Host Base Device ID Lock CSR */
-#define RIO_COMPONENT_TAG_CSR	0x6c	/* [III] Component Tag CSR */
-
-#define RIO_STD_RTE_CONF_DESTID_SEL_CSR	0x70
-#define  RIO_STD_RTE_CONF_EXTCFGEN		0x80000000
-#define RIO_STD_RTE_CONF_PORT_SEL_CSR	0x74
-#define RIO_STD_RTE_DEFAULT_PORT	0x78
-
-					/* 0x7c-0xf8 *//* Reserved */
-					/* 0x100-0xfff8 *//* [I] Extended Features Space */
-					/* 0x10000-0xfffff8 *//* [I] Implementation-defined Space */
-
-/*
- * Extended Features Space is a configuration space area where
- * functionality is mapped into extended feature blocks via a
- * singly linked list of extended feature pointers (EFT_PTR).
- *
- * Each extended feature block can be identified/located in
- * Extended Features Space by walking the extended feature
- * list starting with the Extended Feature Pointer located
- * in the Assembly Information CAR.
- *
- * Extended Feature Blocks (EFBs) are identified with an assigned
- * EFB ID. Extended feature block offsets in the definitions are
- * relative to the offset of the EFB within the  Extended Features
- * Space.
- */
-
-/* Helper macros to parse the Extended Feature Block header */
-#define RIO_EFB_PTR_MASK	0xffff0000
-#define RIO_EFB_ID_MASK		0x0000ffff
-#define RIO_GET_BLOCK_PTR(x)	((x & RIO_EFB_PTR_MASK) >> 16)
-#define RIO_GET_BLOCK_ID(x)	(x & RIO_EFB_ID_MASK)
-
-/* Extended Feature Block IDs */
-#define RIO_EFB_PAR_EP_ID	0x0001	/* [IV] LP/LVDS EP Devices */
-#define RIO_EFB_PAR_EP_REC_ID	0x0002	/* [IV] LP/LVDS EP Recovery Devices */
-#define RIO_EFB_PAR_EP_FREE_ID	0x0003	/* [IV] LP/LVDS EP Free Devices */
-#define RIO_EFB_SER_EP_ID_V13P	0x0001	/* [VI] LP/Serial EP Devices, RapidIO Spec ver 1.3 and above */
-#define RIO_EFB_SER_EP_REC_ID_V13P	0x0002	/* [VI] LP/Serial EP Recovery Devices, RapidIO Spec ver 1.3 and above */
-#define RIO_EFB_SER_EP_FREE_ID_V13P	0x0003	/* [VI] LP/Serial EP Free Devices, RapidIO Spec ver 1.3 and above */
-#define RIO_EFB_SER_EP_ID	0x0004	/* [VI] LP/Serial EP Devices */
-#define RIO_EFB_SER_EP_REC_ID	0x0005	/* [VI] LP/Serial EP Recovery Devices */
-#define RIO_EFB_SER_EP_FREE_ID	0x0006	/* [VI] LP/Serial EP Free Devices */
-#define RIO_EFB_SER_EP_FREC_ID	0x0009  /* [VI] LP/Serial EP Free Recovery Devices */
-#define RIO_EFB_ERR_MGMNT	0x0007  /* [VIII] Error Management Extensions */
-
-/*
- * Physical 8/16 LP-LVDS
- * ID=0x0001, Generic End Point Devices
- * ID=0x0002, Generic End Point Devices, software assisted recovery option
- * ID=0x0003, Generic End Point Free Devices
- *
- * Physical LP-Serial
- * ID=0x0004, Generic End Point Devices
- * ID=0x0005, Generic End Point Devices, software assisted recovery option
- * ID=0x0006, Generic End Point Free Devices
- */
-#define RIO_PORT_MNT_HEADER		0x0000
-#define RIO_PORT_REQ_CTL_CSR		0x0020
-#define RIO_PORT_RSP_CTL_CSR		0x0024	/* 0x0001/0x0002 */
-#define RIO_PORT_LINKTO_CTL_CSR		0x0020	/* Serial */
-#define RIO_PORT_RSPTO_CTL_CSR		0x0024	/* Serial */
-#define RIO_PORT_GEN_CTL_CSR		0x003c
-#define  RIO_PORT_GEN_HOST		0x80000000
-#define  RIO_PORT_GEN_MASTER		0x40000000
-#define  RIO_PORT_GEN_DISCOVERED	0x20000000
-#define RIO_PORT_N_MNT_REQ_CSR(x)	(0x0040 + x*0x20)	/* 0x0002 */
-#define  RIO_MNT_REQ_CMD_RD		0x03	/* Reset-device command */
-#define  RIO_MNT_REQ_CMD_IS		0x04	/* Input-status command */
-#define RIO_PORT_N_MNT_RSP_CSR(x)	(0x0044 + x*0x20)	/* 0x0002 */
-#define  RIO_PORT_N_MNT_RSP_RVAL	0x80000000 /* Response Valid */
-#define  RIO_PORT_N_MNT_RSP_ASTAT	0x000007e0 /* ackID Status */
-#define  RIO_PORT_N_MNT_RSP_LSTAT	0x0000001f /* Link Status */
-#define RIO_PORT_N_ACK_STS_CSR(x)	(0x0048 + x*0x20)	/* 0x0002 */
-#define  RIO_PORT_N_ACK_CLEAR		0x80000000
-#define  RIO_PORT_N_ACK_INBOUND		0x3f000000
-#define  RIO_PORT_N_ACK_OUTSTAND	0x00003f00
-#define  RIO_PORT_N_ACK_OUTBOUND	0x0000003f
-#define RIO_PORT_N_ERR_STS_CSR(x)	(0x0058 + x*0x20)
-#define  RIO_PORT_N_ERR_STS_PW_OUT_ES	0x00010000 /* Output Error-stopped */
-#define  RIO_PORT_N_ERR_STS_PW_INP_ES	0x00000100 /* Input Error-stopped */
-#define  RIO_PORT_N_ERR_STS_PW_PEND	0x00000010 /* Port-Write Pending */
-#define  RIO_PORT_N_ERR_STS_PORT_ERR	0x00000004
-#define  RIO_PORT_N_ERR_STS_PORT_OK	0x00000002
-#define  RIO_PORT_N_ERR_STS_PORT_UNINIT	0x00000001
-#define RIO_PORT_N_CTL_CSR(x)		(0x005c + x*0x20)
-#define  RIO_PORT_N_CTL_PWIDTH		0xc0000000
-#define  RIO_PORT_N_CTL_PWIDTH_1	0x00000000
-#define  RIO_PORT_N_CTL_PWIDTH_4	0x40000000
-#define  RIO_PORT_N_CTL_P_TYP_SER	0x00000001
-#define  RIO_PORT_N_CTL_LOCKOUT		0x00000002
-#define  RIO_PORT_N_CTL_EN_RX_SER	0x00200000
-#define  RIO_PORT_N_CTL_EN_TX_SER	0x00400000
-#define  RIO_PORT_N_CTL_EN_RX_PAR	0x08000000
-#define  RIO_PORT_N_CTL_EN_TX_PAR	0x40000000
-
-/*
- * Error Management Extensions (RapidIO 1.3+, Part 8)
- *
- * Extended Features Block ID=0x0007
- */
-
-/* General EM Registers (Common for all Ports) */
-
-#define RIO_EM_EFB_HEADER	0x000	/* Error Management Extensions Block Header */
-#define RIO_EM_LTL_ERR_DETECT	0x008	/* Logical/Transport Layer Error Detect CSR */
-#define RIO_EM_LTL_ERR_EN	0x00c	/* Logical/Transport Layer Error Enable CSR */
-#define  REM_LTL_ERR_ILLTRAN		0x08000000 /* Illegal Transaction decode */
-#define  REM_LTL_ERR_UNSOLR		0x00800000 /* Unsolicited Response */
-#define  REM_LTL_ERR_UNSUPTR		0x00400000 /* Unsupported Transaction */
-#define  REM_LTL_ERR_IMPSPEC		0x000000ff /* Implementation Specific */
-#define RIO_EM_LTL_HIADDR_CAP	0x010	/* Logical/Transport Layer High Address Capture CSR */
-#define RIO_EM_LTL_ADDR_CAP	0x014	/* Logical/Transport Layer Address Capture CSR */
-#define RIO_EM_LTL_DEVID_CAP	0x018	/* Logical/Transport Layer Device ID Capture CSR */
-#define RIO_EM_LTL_CTRL_CAP	0x01c	/* Logical/Transport Layer Control Capture CSR */
-#define RIO_EM_PW_TGT_DEVID	0x028	/* Port-write Target deviceID CSR */
-#define RIO_EM_PKT_TTL		0x02c	/* Packet Time-to-live CSR */
-
-/* Per-Port EM Registers */
-
-#define RIO_EM_PN_ERR_DETECT(x)	(0x040 + x*0x40) /* Port N Error Detect CSR */
-#define  REM_PED_IMPL_SPEC		0x80000000
-#define  REM_PED_LINK_TO		0x00000001
-#define RIO_EM_PN_ERRRATE_EN(x) (0x044 + x*0x40) /* Port N Error Rate Enable CSR */
-#define RIO_EM_PN_ATTRIB_CAP(x)	(0x048 + x*0x40) /* Port N Attributes Capture CSR */
-#define RIO_EM_PN_PKT_CAP_0(x)	(0x04c + x*0x40) /* Port N Packet/Control Symbol Capture 0 CSR */
-#define RIO_EM_PN_PKT_CAP_1(x)	(0x050 + x*0x40) /* Port N Packet Capture 1 CSR */
-#define RIO_EM_PN_PKT_CAP_2(x)	(0x054 + x*0x40) /* Port N Packet Capture 2 CSR */
-#define RIO_EM_PN_PKT_CAP_3(x)	(0x058 + x*0x40) /* Port N Packet Capture 3 CSR */
-#define RIO_EM_PN_ERRRATE(x)	(0x068 + x*0x40) /* Port N Error Rate CSR */
-#define RIO_EM_PN_ERRRATE_TR(x) (0x06c + x*0x40) /* Port N Error Rate Threshold CSR */
-
-#endif				/* LINUX_RIO_REGS_H */
diff --git a/ANDROID_3.4.5/include/linux/rmap.h b/ANDROID_3.4.5/include/linux/rmap.h
deleted file mode 100644
index fd07c454..00000000
--- a/ANDROID_3.4.5/include/linux/rmap.h
+++ /dev/null
@@ -1,263 +0,0 @@
-#ifndef _LINUX_RMAP_H
-#define _LINUX_RMAP_H
-/*
- * Declarations for Reverse Mapping functions in mm/rmap.c
- */
-
-#include <linux/list.h>
-#include <linux/slab.h>
-#include <linux/mm.h>
-#include <linux/mutex.h>
-#include <linux/memcontrol.h>
-
-/*
- * The anon_vma heads a list of private "related" vmas, to scan if
- * an anonymous page pointing to this anon_vma needs to be unmapped:
- * the vmas on the list will be related by forking, or by splitting.
- *
- * Since vmas come and go as they are split and merged (particularly
- * in mprotect), the mapping field of an anonymous page cannot point
- * directly to a vma: instead it points to an anon_vma, on whose list
- * the related vmas can be easily linked or unlinked.
- *
- * After unlinking the last vma on the list, we must garbage collect
- * the anon_vma object itself: we're guaranteed no page can be
- * pointing to this anon_vma once its vma list is empty.
- */
-struct anon_vma {
-	struct anon_vma *root;	/* Root of this anon_vma tree */
-	struct mutex mutex;	/* Serialize access to vma list */
-	/*
-	 * The refcount is taken on an anon_vma when there is no
-	 * guarantee that the vma of page tables will exist for
-	 * the duration of the operation. A caller that takes
-	 * the reference is responsible for clearing up the
-	 * anon_vma if they are the last user on release
-	 */
-	atomic_t refcount;
-
-	/*
-	 * NOTE: the LSB of the head.next is set by
-	 * mm_take_all_locks() _after_ taking the above lock. So the
-	 * head must only be read/written after taking the above lock
-	 * to be sure to see a valid next pointer. The LSB bit itself
-	 * is serialized by a system wide lock only visible to
-	 * mm_take_all_locks() (mm_all_locks_mutex).
-	 */
-	struct list_head head;	/* Chain of private "related" vmas */
-};
-
-/*
- * The copy-on-write semantics of fork mean that an anon_vma
- * can become associated with multiple processes. Furthermore,
- * each child process will have its own anon_vma, where new
- * pages for that process are instantiated.
- *
- * This structure allows us to find the anon_vmas associated
- * with a VMA, or the VMAs associated with an anon_vma.
- * The "same_vma" list contains the anon_vma_chains linking
- * all the anon_vmas associated with this VMA.
- * The "same_anon_vma" list contains the anon_vma_chains
- * which link all the VMAs associated with this anon_vma.
- */
-struct anon_vma_chain {
-	struct vm_area_struct *vma;
-	struct anon_vma *anon_vma;
-	struct list_head same_vma;   /* locked by mmap_sem & page_table_lock */
-	struct list_head same_anon_vma;	/* locked by anon_vma->mutex */
-};
-
-#ifdef CONFIG_MMU
-static inline void get_anon_vma(struct anon_vma *anon_vma)
-{
-	atomic_inc(&anon_vma->refcount);
-}
-
-void __put_anon_vma(struct anon_vma *anon_vma);
-
-static inline void put_anon_vma(struct anon_vma *anon_vma)
-{
-	if (atomic_dec_and_test(&anon_vma->refcount))
-		__put_anon_vma(anon_vma);
-}
-
-static inline struct anon_vma *page_anon_vma(struct page *page)
-{
-	if (((unsigned long)page->mapping & PAGE_MAPPING_FLAGS) !=
-					    PAGE_MAPPING_ANON)
-		return NULL;
-	return page_rmapping(page);
-}
-
-static inline void vma_lock_anon_vma(struct vm_area_struct *vma)
-{
-	struct anon_vma *anon_vma = vma->anon_vma;
-	if (anon_vma)
-		mutex_lock(&anon_vma->root->mutex);
-}
-
-static inline void vma_unlock_anon_vma(struct vm_area_struct *vma)
-{
-	struct anon_vma *anon_vma = vma->anon_vma;
-	if (anon_vma)
-		mutex_unlock(&anon_vma->root->mutex);
-}
-
-static inline void anon_vma_lock(struct anon_vma *anon_vma)
-{
-	mutex_lock(&anon_vma->root->mutex);
-}
-
-static inline void anon_vma_unlock(struct anon_vma *anon_vma)
-{
-	mutex_unlock(&anon_vma->root->mutex);
-}
-
-/*
- * anon_vma helper functions.
- */
-void anon_vma_init(void);	/* create anon_vma_cachep */
-int  anon_vma_prepare(struct vm_area_struct *);
-void unlink_anon_vmas(struct vm_area_struct *);
-int anon_vma_clone(struct vm_area_struct *, struct vm_area_struct *);
-void anon_vma_moveto_tail(struct vm_area_struct *);
-int anon_vma_fork(struct vm_area_struct *, struct vm_area_struct *);
-
-static inline void anon_vma_merge(struct vm_area_struct *vma,
-				  struct vm_area_struct *next)
-{
-	VM_BUG_ON(vma->anon_vma != next->anon_vma);
-	unlink_anon_vmas(next);
-}
-
-struct anon_vma *page_get_anon_vma(struct page *page);
-
-/*
- * rmap interfaces called when adding or removing pte of page
- */
-void page_move_anon_rmap(struct page *, struct vm_area_struct *, unsigned long);
-void page_add_anon_rmap(struct page *, struct vm_area_struct *, unsigned long);
-void do_page_add_anon_rmap(struct page *, struct vm_area_struct *,
-			   unsigned long, int);
-void page_add_new_anon_rmap(struct page *, struct vm_area_struct *, unsigned long);
-void page_add_file_rmap(struct page *);
-void page_remove_rmap(struct page *);
-
-void hugepage_add_anon_rmap(struct page *, struct vm_area_struct *,
-			    unsigned long);
-void hugepage_add_new_anon_rmap(struct page *, struct vm_area_struct *,
-				unsigned long);
-
-static inline void page_dup_rmap(struct page *page)
-{
-	atomic_inc(&page->_mapcount);
-}
-
-/*
- * Called from mm/vmscan.c to handle paging out
- */
-int page_referenced(struct page *, int is_locked,
-			struct mem_cgroup *memcg, unsigned long *vm_flags);
-int page_referenced_one(struct page *, struct vm_area_struct *,
-	unsigned long address, unsigned int *mapcount, unsigned long *vm_flags);
-
-enum ttu_flags {
-	TTU_UNMAP = 0,			/* unmap mode */
-	TTU_MIGRATION = 1,		/* migration mode */
-	TTU_MUNLOCK = 2,		/* munlock mode */
-	TTU_ACTION_MASK = 0xff,
-
-	TTU_IGNORE_MLOCK = (1 << 8),	/* ignore mlock */
-	TTU_IGNORE_ACCESS = (1 << 9),	/* don't age */
-	TTU_IGNORE_HWPOISON = (1 << 10),/* corrupted page is recoverable */
-};
-#define TTU_ACTION(x) ((x) & TTU_ACTION_MASK)
-
-bool is_vma_temporary_stack(struct vm_area_struct *vma);
-
-int try_to_unmap(struct page *, enum ttu_flags flags);
-int try_to_unmap_one(struct page *, struct vm_area_struct *,
-			unsigned long address, enum ttu_flags flags);
-
-/*
- * Called from mm/filemap_xip.c to unmap empty zero page
- */
-pte_t *__page_check_address(struct page *, struct mm_struct *,
-				unsigned long, spinlock_t **, int);
-
-static inline pte_t *page_check_address(struct page *page, struct mm_struct *mm,
-					unsigned long address,
-					spinlock_t **ptlp, int sync)
-{
-	pte_t *ptep;
-
-	__cond_lock(*ptlp, ptep = __page_check_address(page, mm, address,
-						       ptlp, sync));
-	return ptep;
-}
-
-/*
- * Used by swapoff to help locate where page is expected in vma.
- */
-unsigned long page_address_in_vma(struct page *, struct vm_area_struct *);
-
-/*
- * Cleans the PTEs of shared mappings.
- * (and since clean PTEs should also be readonly, write protects them too)
- *
- * returns the number of cleaned PTEs.
- */
-int page_mkclean(struct page *);
-
-/*
- * called in munlock()/munmap() path to check for other vmas holding
- * the page mlocked.
- */
-int try_to_munlock(struct page *);
-
-/*
- * Called by memory-failure.c to kill processes.
- */
-struct anon_vma *page_lock_anon_vma(struct page *page);
-void page_unlock_anon_vma(struct anon_vma *anon_vma);
-int page_mapped_in_vma(struct page *page, struct vm_area_struct *vma);
-
-/*
- * Called by migrate.c to remove migration ptes, but might be used more later.
- */
-int rmap_walk(struct page *page, int (*rmap_one)(struct page *,
-		struct vm_area_struct *, unsigned long, void *), void *arg);
-
-#else	/* !CONFIG_MMU */
-
-#define anon_vma_init()		do {} while (0)
-#define anon_vma_prepare(vma)	(0)
-#define anon_vma_link(vma)	do {} while (0)
-
-static inline int page_referenced(struct page *page, int is_locked,
-				  struct mem_cgroup *memcg,
-				  unsigned long *vm_flags)
-{
-	*vm_flags = 0;
-	return 0;
-}
-
-#define try_to_unmap(page, refs) SWAP_FAIL
-
-static inline int page_mkclean(struct page *page)
-{
-	return 0;
-}
-
-
-#endif	/* CONFIG_MMU */
-
-/*
- * Return values of try_to_unmap
- */
-#define SWAP_SUCCESS	0
-#define SWAP_AGAIN	1
-#define SWAP_FAIL	2
-#define SWAP_MLOCK	3
-
-#endif	/* _LINUX_RMAP_H */
diff --git a/ANDROID_3.4.5/include/linux/romfs_fs.h b/ANDROID_3.4.5/include/linux/romfs_fs.h
deleted file mode 100644
index 5f57f93b..00000000
--- a/ANDROID_3.4.5/include/linux/romfs_fs.h
+++ /dev/null
@@ -1,59 +0,0 @@
-#ifndef __LINUX_ROMFS_FS_H
-#define __LINUX_ROMFS_FS_H
-
-#include <linux/types.h>
-#include <linux/fs.h>
-
-/* The basic structures of the romfs filesystem */
-
-#define ROMBSIZE BLOCK_SIZE
-#define ROMBSBITS BLOCK_SIZE_BITS
-#define ROMBMASK (ROMBSIZE-1)
-#define ROMFS_MAGIC 0x7275
-
-#define ROMFS_MAXFN 128
-
-#define __mkw(h,l) (((h)&0x00ff)<< 8|((l)&0x00ff))
-#define __mkl(h,l) (((h)&0xffff)<<16|((l)&0xffff))
-#define __mk4(a,b,c,d) cpu_to_be32(__mkl(__mkw(a,b),__mkw(c,d)))
-#define ROMSB_WORD0 __mk4('-','r','o','m')
-#define ROMSB_WORD1 __mk4('1','f','s','-')
-
-/* On-disk "super block" */
-
-struct romfs_super_block {
-	__be32 word0;
-	__be32 word1;
-	__be32 size;
-	__be32 checksum;
-	char name[0];		/* volume name */
-};
-
-/* On disk inode */
-
-struct romfs_inode {
-	__be32 next;		/* low 4 bits see ROMFH_ */
-	__be32 spec;
-	__be32 size;
-	__be32 checksum;
-	char name[0];
-};
-
-#define ROMFH_TYPE 7
-#define ROMFH_HRD 0
-#define ROMFH_DIR 1
-#define ROMFH_REG 2
-#define ROMFH_SYM 3
-#define ROMFH_BLK 4
-#define ROMFH_CHR 5
-#define ROMFH_SCK 6
-#define ROMFH_FIF 7
-#define ROMFH_EXEC 8
-
-/* Alignment */
-
-#define ROMFH_SIZE 16
-#define ROMFH_PAD (ROMFH_SIZE-1)
-#define ROMFH_MASK (~ROMFH_PAD)
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/root_dev.h b/ANDROID_3.4.5/include/linux/root_dev.h
deleted file mode 100644
index ed241aad..00000000
--- a/ANDROID_3.4.5/include/linux/root_dev.h
+++ /dev/null
@@ -1,23 +0,0 @@
-#ifndef _ROOT_DEV_H_
-#define _ROOT_DEV_H_
-
-#include <linux/major.h>
-#include <linux/types.h>
-#include <linux/kdev_t.h>
-
-enum {
-	Root_NFS = MKDEV(UNNAMED_MAJOR, 255),
-	Root_RAM0 = MKDEV(RAMDISK_MAJOR, 0),
-	Root_RAM1 = MKDEV(RAMDISK_MAJOR, 1),
-	Root_FD0 = MKDEV(FLOPPY_MAJOR, 0),
-	Root_HDA1 = MKDEV(IDE0_MAJOR, 1),
-	Root_HDA2 = MKDEV(IDE0_MAJOR, 2),
-	Root_SDA1 = MKDEV(SCSI_DISK0_MAJOR, 1),
-	Root_SDA2 = MKDEV(SCSI_DISK0_MAJOR, 2),
-	Root_HDC1 = MKDEV(IDE1_MAJOR, 1),
-	Root_SR0 = MKDEV(SCSI_CDROM_MAJOR, 0),
-};
-
-extern dev_t ROOT_DEV;
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/rose.h b/ANDROID_3.4.5/include/linux/rose.h
deleted file mode 100644
index 1fcfe958..00000000
--- a/ANDROID_3.4.5/include/linux/rose.h
+++ /dev/null
@@ -1,90 +0,0 @@
-/*
- * These are the public elements of the Linux kernel Rose implementation.
- * For kernel AX.25 see the file ax25.h. This file requires ax25.h for the
- * definition of the ax25_address structure.
- */
-
-#ifndef	ROSE_KERNEL_H
-#define	ROSE_KERNEL_H
-
-#include <linux/socket.h>
-#include <linux/ax25.h>
-
-#define ROSE_MTU	251
-
-#define ROSE_MAX_DIGIS 6
-
-#define	ROSE_DEFER	1
-#define ROSE_T1		2
-#define	ROSE_T2		3
-#define	ROSE_T3		4
-#define	ROSE_IDLE	5
-#define	ROSE_QBITINCL	6
-#define	ROSE_HOLDBACK	7
-
-#define	SIOCRSGCAUSE		(SIOCPROTOPRIVATE+0)
-#define	SIOCRSSCAUSE		(SIOCPROTOPRIVATE+1)
-#define	SIOCRSL2CALL		(SIOCPROTOPRIVATE+2)
-#define	SIOCRSSL2CALL		(SIOCPROTOPRIVATE+2)
-#define	SIOCRSACCEPT		(SIOCPROTOPRIVATE+3)
-#define	SIOCRSCLRRT		(SIOCPROTOPRIVATE+4)
-#define	SIOCRSGL2CALL		(SIOCPROTOPRIVATE+5)
-#define	SIOCRSGFACILITIES	(SIOCPROTOPRIVATE+6)
-
-#define	ROSE_DTE_ORIGINATED	0x00
-#define	ROSE_NUMBER_BUSY	0x01
-#define	ROSE_INVALID_FACILITY	0x03
-#define	ROSE_NETWORK_CONGESTION	0x05
-#define	ROSE_OUT_OF_ORDER	0x09
-#define	ROSE_ACCESS_BARRED	0x0B
-#define	ROSE_NOT_OBTAINABLE	0x0D
-#define	ROSE_REMOTE_PROCEDURE	0x11
-#define	ROSE_LOCAL_PROCEDURE	0x13
-#define	ROSE_SHIP_ABSENT	0x39
-
-typedef struct {
-	char		rose_addr[5];
-} rose_address;
-
-struct sockaddr_rose {
-	__kernel_sa_family_t srose_family;
-	rose_address	srose_addr;
-	ax25_address	srose_call;
-	int		srose_ndigis;
-	ax25_address	srose_digi;
-};
-
-struct full_sockaddr_rose {
-	__kernel_sa_family_t srose_family;
-	rose_address	srose_addr;
-	ax25_address	srose_call;
-	unsigned int	srose_ndigis;
-	ax25_address	srose_digis[ROSE_MAX_DIGIS];
-};
-
-struct rose_route_struct {
-	rose_address	address;
-	unsigned short	mask;
-	ax25_address	neighbour;
-	char		device[16];
-	unsigned char	ndigis;
-	ax25_address	digipeaters[AX25_MAX_DIGIS];
-};
-
-struct rose_cause_struct {
-	unsigned char	cause;
-	unsigned char	diagnostic;
-};
-
-struct rose_facilities_struct {
-	rose_address	source_addr,   dest_addr;
-	ax25_address	source_call,   dest_call;
-	unsigned char	source_ndigis, dest_ndigis;
-	ax25_address	source_digis[ROSE_MAX_DIGIS];
-	ax25_address	dest_digis[ROSE_MAX_DIGIS];
-	unsigned int	rand;
-	rose_address	fail_addr;
-	ax25_address	fail_call;
-};
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/rotary_encoder.h b/ANDROID_3.4.5/include/linux/rotary_encoder.h
deleted file mode 100644
index 3f594dce..00000000
--- a/ANDROID_3.4.5/include/linux/rotary_encoder.h
+++ /dev/null
@@ -1,16 +0,0 @@
-#ifndef __ROTARY_ENCODER_H__
-#define __ROTARY_ENCODER_H__
-
-struct rotary_encoder_platform_data {
-	unsigned int steps;
-	unsigned int axis;
-	unsigned int gpio_a;
-	unsigned int gpio_b;
-	unsigned int inverted_a;
-	unsigned int inverted_b;
-	bool relative_axis;
-	bool rollover;
-	bool half_period;
-};
-
-#endif /* __ROTARY_ENCODER_H__ */
diff --git a/ANDROID_3.4.5/include/linux/route.h b/ANDROID_3.4.5/include/linux/route.h
deleted file mode 100644
index 66007083..00000000
--- a/ANDROID_3.4.5/include/linux/route.h
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
- * INET		An implementation of the TCP/IP protocol suite for the LINUX
- *		operating system.  INET is implemented using the  BSD Socket
- *		interface as the means of communication with the user level.
- *
- *		Global definitions for the IP router interface.
- *
- * Version:	@(#)route.h	1.0.3	05/27/93
- *
- * Authors:	Original taken from Berkeley UNIX 4.3, (c) UCB 1986-1988
- *		for the purposes of compatibility only.
- *
- *		Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
- *
- * Changes:
- *              Mike McLagan    :       Routing by source
- *
- *		This program is free software; you can redistribute it and/or
- *		modify it under the terms of the GNU General Public License
- *		as published by the Free Software Foundation; either version
- *		2 of the License, or (at your option) any later version.
- */
-#ifndef _LINUX_ROUTE_H
-#define _LINUX_ROUTE_H
-
-#include <linux/if.h>
-#include <linux/compiler.h>
-
-/* This structure gets passed by the SIOCADDRT and SIOCDELRT calls. */
-struct rtentry {
-	unsigned long	rt_pad1;
-	struct sockaddr	rt_dst;		/* target address		*/
-	struct sockaddr	rt_gateway;	/* gateway addr (RTF_GATEWAY)	*/
-	struct sockaddr	rt_genmask;	/* target network mask (IP)	*/
-	unsigned short	rt_flags;
-	short		rt_pad2;
-	unsigned long	rt_pad3;
-	void		*rt_pad4;
-	short		rt_metric;	/* +1 for binary compatibility!	*/
-	char __user	*rt_dev;	/* forcing the device at add	*/
-	unsigned long	rt_mtu;		/* per route MTU/Window 	*/
-#ifndef __KERNEL__
-#define rt_mss	rt_mtu			/* Compatibility :-(            */
-#endif
-	unsigned long	rt_window;	/* Window clamping 		*/
-	unsigned short	rt_irtt;	/* Initial RTT			*/
-};
-
-
-#define	RTF_UP		0x0001		/* route usable		  	*/
-#define	RTF_GATEWAY	0x0002		/* destination is a gateway	*/
-#define	RTF_HOST	0x0004		/* host entry (net otherwise)	*/
-#define RTF_REINSTATE	0x0008		/* reinstate route after tmout	*/
-#define	RTF_DYNAMIC	0x0010		/* created dyn. (by redirect)	*/
-#define	RTF_MODIFIED	0x0020		/* modified dyn. (by redirect)	*/
-#define RTF_MTU		0x0040		/* specific MTU for this route	*/
-#define RTF_MSS		RTF_MTU		/* Compatibility :-(		*/
-#define RTF_WINDOW	0x0080		/* per route window clamping	*/
-#define RTF_IRTT	0x0100		/* Initial round trip time	*/
-#define RTF_REJECT	0x0200		/* Reject route			*/
-
-/*
- *	<linux/ipv6_route.h> uses RTF values >= 64k
- */
-
-
-
-#endif	/* _LINUX_ROUTE_H */
-
diff --git a/ANDROID_3.4.5/include/linux/rpmsg.h b/ANDROID_3.4.5/include/linux/rpmsg.h
deleted file mode 100644
index 82a67390..00000000
--- a/ANDROID_3.4.5/include/linux/rpmsg.h
+++ /dev/null
@@ -1,332 +0,0 @@
-/*
- * Remote processor messaging
- *
- * Copyright (C) 2011 Texas Instruments, Inc.
- * Copyright (C) 2011 Google, Inc.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * * Redistributions of source code must retain the above copyright
- *   notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- *   notice, this list of conditions and the following disclaimer in
- *   the documentation and/or other materials provided with the
- *   distribution.
- * * Neither the name Texas Instruments nor the names of its
- *   contributors may be used to endorse or promote products derived
- *   from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#ifndef _LINUX_RPMSG_H
-#define _LINUX_RPMSG_H
-
-#include <linux/types.h>
-#include <linux/device.h>
-#include <linux/mod_devicetable.h>
-#include <linux/kref.h>
-#include <linux/mutex.h>
-
-/* The feature bitmap for virtio rpmsg */
-#define VIRTIO_RPMSG_F_NS	0 /* RP supports name service notifications */
-
-/**
- * struct rpmsg_hdr - common header for all rpmsg messages
- * @src: source address
- * @dst: destination address
- * @reserved: reserved for future use
- * @len: length of payload (in bytes)
- * @flags: message flags
- * @data: @len bytes of message payload data
- *
- * Every message sent(/received) on the rpmsg bus begins with this header.
- */
-struct rpmsg_hdr {
-	u32 src;
-	u32 dst;
-	u32 reserved;
-	u16 len;
-	u16 flags;
-	u8 data[0];
-} __packed;
-
-/**
- * struct rpmsg_ns_msg - dynamic name service announcement message
- * @name: name of remote service that is published
- * @addr: address of remote service that is published
- * @flags: indicates whether service is created or destroyed
- *
- * This message is sent across to publish a new service, or announce
- * about its removal. When we receive these messages, an appropriate
- * rpmsg channel (i.e device) is created/destroyed. In turn, the ->probe()
- * or ->remove() handler of the appropriate rpmsg driver will be invoked
- * (if/as-soon-as one is registered).
- */
-struct rpmsg_ns_msg {
-	char name[RPMSG_NAME_SIZE];
-	u32 addr;
-	u32 flags;
-} __packed;
-
-/**
- * enum rpmsg_ns_flags - dynamic name service announcement flags
- *
- * @RPMSG_NS_CREATE: a new remote service was just created
- * @RPMSG_NS_DESTROY: a known remote service was just destroyed
- */
-enum rpmsg_ns_flags {
-	RPMSG_NS_CREATE		= 0,
-	RPMSG_NS_DESTROY	= 1,
-};
-
-#define RPMSG_ADDR_ANY		0xFFFFFFFF
-
-struct virtproc_info;
-
-/**
- * rpmsg_channel - devices that belong to the rpmsg bus are called channels
- * @vrp: the remote processor this channel belongs to
- * @dev: the device struct
- * @id: device id (used to match between rpmsg drivers and devices)
- * @src: local address
- * @dst: destination address
- * @ept: the rpmsg endpoint of this channel
- * @announce: if set, rpmsg will announce the creation/removal of this channel
- */
-struct rpmsg_channel {
-	struct virtproc_info *vrp;
-	struct device dev;
-	struct rpmsg_device_id id;
-	u32 src;
-	u32 dst;
-	struct rpmsg_endpoint *ept;
-	bool announce;
-};
-
-typedef void (*rpmsg_rx_cb_t)(struct rpmsg_channel *, void *, int, void *, u32);
-
-/**
- * struct rpmsg_endpoint - binds a local rpmsg address to its user
- * @rpdev: rpmsg channel device
- * @refcount: when this drops to zero, the ept is deallocated
- * @cb: rx callback handler
- * @cb_lock: must be taken before accessing/changing @cb
- * @addr: local rpmsg address
- * @priv: private data for the driver's use
- *
- * In essence, an rpmsg endpoint represents a listener on the rpmsg bus, as
- * it binds an rpmsg address with an rx callback handler.
- *
- * Simple rpmsg drivers shouldn't use this struct directly, because
- * things just work: every rpmsg driver provides an rx callback upon
- * registering to the bus, and that callback is then bound to its rpmsg
- * address when the driver is probed. When relevant inbound messages arrive
- * (i.e. messages which their dst address equals to the src address of
- * the rpmsg channel), the driver's handler is invoked to process it.
- *
- * More complicated drivers though, that do need to allocate additional rpmsg
- * addresses, and bind them to different rx callbacks, must explicitly
- * create additional endpoints by themselves (see rpmsg_create_ept()).
- */
-struct rpmsg_endpoint {
-	struct rpmsg_channel *rpdev;
-	struct kref refcount;
-	rpmsg_rx_cb_t cb;
-	struct mutex cb_lock;
-	u32 addr;
-	void *priv;
-};
-
-/**
- * struct rpmsg_driver - rpmsg driver struct
- * @drv: underlying device driver
- * @id_table: rpmsg ids serviced by this driver
- * @probe: invoked when a matching rpmsg channel (i.e. device) is found
- * @remove: invoked when the rpmsg channel is removed
- * @callback: invoked when an inbound message is received on the channel
- */
-struct rpmsg_driver {
-	struct device_driver drv;
-	const struct rpmsg_device_id *id_table;
-	int (*probe)(struct rpmsg_channel *dev);
-	void (*remove)(struct rpmsg_channel *dev);
-	void (*callback)(struct rpmsg_channel *, void *, int, void *, u32);
-};
-
-int register_rpmsg_device(struct rpmsg_channel *dev);
-void unregister_rpmsg_device(struct rpmsg_channel *dev);
-int register_rpmsg_driver(struct rpmsg_driver *drv);
-void unregister_rpmsg_driver(struct rpmsg_driver *drv);
-void rpmsg_destroy_ept(struct rpmsg_endpoint *);
-struct rpmsg_endpoint *rpmsg_create_ept(struct rpmsg_channel *,
-				rpmsg_rx_cb_t cb, void *priv, u32 addr);
-int
-rpmsg_send_offchannel_raw(struct rpmsg_channel *, u32, u32, void *, int, bool);
-
-/**
- * rpmsg_send() - send a message across to the remote processor
- * @rpdev: the rpmsg channel
- * @data: payload of message
- * @len: length of payload
- *
- * This function sends @data of length @len on the @rpdev channel.
- * The message will be sent to the remote processor which the @rpdev
- * channel belongs to, using @rpdev's source and destination addresses.
- * In case there are no TX buffers available, the function will block until
- * one becomes available, or a timeout of 15 seconds elapses. When the latter
- * happens, -ERESTARTSYS is returned.
- *
- * Can only be called from process context (for now).
- *
- * Returns 0 on success and an appropriate error value on failure.
- */
-static inline int rpmsg_send(struct rpmsg_channel *rpdev, void *data, int len)
-{
-	u32 src = rpdev->src, dst = rpdev->dst;
-
-	return rpmsg_send_offchannel_raw(rpdev, src, dst, data, len, true);
-}
-
-/**
- * rpmsg_sendto() - send a message across to the remote processor, specify dst
- * @rpdev: the rpmsg channel
- * @data: payload of message
- * @len: length of payload
- * @dst: destination address
- *
- * This function sends @data of length @len to the remote @dst address.
- * The message will be sent to the remote processor which the @rpdev
- * channel belongs to, using @rpdev's source address.
- * In case there are no TX buffers available, the function will block until
- * one becomes available, or a timeout of 15 seconds elapses. When the latter
- * happens, -ERESTARTSYS is returned.
- *
- * Can only be called from process context (for now).
- *
- * Returns 0 on success and an appropriate error value on failure.
- */
-static inline
-int rpmsg_sendto(struct rpmsg_channel *rpdev, void *data, int len, u32 dst)
-{
-	u32 src = rpdev->src;
-
-	return rpmsg_send_offchannel_raw(rpdev, src, dst, data, len, true);
-}
-
-/**
- * rpmsg_send_offchannel() - send a message using explicit src/dst addresses
- * @rpdev: the rpmsg channel
- * @src: source address
- * @dst: destination address
- * @data: payload of message
- * @len: length of payload
- *
- * This function sends @data of length @len to the remote @dst address,
- * and uses @src as the source address.
- * The message will be sent to the remote processor which the @rpdev
- * channel belongs to.
- * In case there are no TX buffers available, the function will block until
- * one becomes available, or a timeout of 15 seconds elapses. When the latter
- * happens, -ERESTARTSYS is returned.
- *
- * Can only be called from process context (for now).
- *
- * Returns 0 on success and an appropriate error value on failure.
- */
-static inline
-int rpmsg_send_offchannel(struct rpmsg_channel *rpdev, u32 src, u32 dst,
-							void *data, int len)
-{
-	return rpmsg_send_offchannel_raw(rpdev, src, dst, data, len, true);
-}
-
-/**
- * rpmsg_send() - send a message across to the remote processor
- * @rpdev: the rpmsg channel
- * @data: payload of message
- * @len: length of payload
- *
- * This function sends @data of length @len on the @rpdev channel.
- * The message will be sent to the remote processor which the @rpdev
- * channel belongs to, using @rpdev's source and destination addresses.
- * In case there are no TX buffers available, the function will immediately
- * return -ENOMEM without waiting until one becomes available.
- *
- * Can only be called from process context (for now).
- *
- * Returns 0 on success and an appropriate error value on failure.
- */
-static inline
-int rpmsg_trysend(struct rpmsg_channel *rpdev, void *data, int len)
-{
-	u32 src = rpdev->src, dst = rpdev->dst;
-
-	return rpmsg_send_offchannel_raw(rpdev, src, dst, data, len, false);
-}
-
-/**
- * rpmsg_sendto() - send a message across to the remote processor, specify dst
- * @rpdev: the rpmsg channel
- * @data: payload of message
- * @len: length of payload
- * @dst: destination address
- *
- * This function sends @data of length @len to the remote @dst address.
- * The message will be sent to the remote processor which the @rpdev
- * channel belongs to, using @rpdev's source address.
- * In case there are no TX buffers available, the function will immediately
- * return -ENOMEM without waiting until one becomes available.
- *
- * Can only be called from process context (for now).
- *
- * Returns 0 on success and an appropriate error value on failure.
- */
-static inline
-int rpmsg_trysendto(struct rpmsg_channel *rpdev, void *data, int len, u32 dst)
-{
-	u32 src = rpdev->src;
-
-	return rpmsg_send_offchannel_raw(rpdev, src, dst, data, len, false);
-}
-
-/**
- * rpmsg_send_offchannel() - send a message using explicit src/dst addresses
- * @rpdev: the rpmsg channel
- * @src: source address
- * @dst: destination address
- * @data: payload of message
- * @len: length of payload
- *
- * This function sends @data of length @len to the remote @dst address,
- * and uses @src as the source address.
- * The message will be sent to the remote processor which the @rpdev
- * channel belongs to.
- * In case there are no TX buffers available, the function will immediately
- * return -ENOMEM without waiting until one becomes available.
- *
- * Can only be called from process context (for now).
- *
- * Returns 0 on success and an appropriate error value on failure.
- */
-static inline
-int rpmsg_trysend_offchannel(struct rpmsg_channel *rpdev, u32 src, u32 dst,
-							void *data, int len)
-{
-	return rpmsg_send_offchannel_raw(rpdev, src, dst, data, len, false);
-}
-
-#endif /* _LINUX_RPMSG_H */
diff --git a/ANDROID_3.4.5/include/linux/rslib.h b/ANDROID_3.4.5/include/linux/rslib.h
deleted file mode 100644
index 746580c1..00000000
--- a/ANDROID_3.4.5/include/linux/rslib.h
+++ /dev/null
@@ -1,109 +0,0 @@
-/*
- * include/linux/rslib.h
- *
- * Overview:
- *   Generic Reed Solomon encoder / decoder library
- *
- * Copyright (C) 2004 Thomas Gleixner (tglx@linutronix.de)
- *
- * RS code lifted from reed solomon library written by Phil Karn
- * Copyright 2002 Phil Karn, KA9Q
- *
- * $Id: rslib.h,v 1.4 2005/11/07 11:14:52 gleixner Exp $
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef _RSLIB_H_
-#define _RSLIB_H_
-
-#include <linux/list.h>
-
-/**
- * struct rs_control - rs control structure
- *
- * @mm:		Bits per symbol
- * @nn:		Symbols per block (= (1<<mm)-1)
- * @alpha_to:	log lookup table
- * @index_of:	Antilog lookup table
- * @genpoly:	Generator polynomial
- * @nroots:	Number of generator roots = number of parity symbols
- * @fcr:	First consecutive root, index form
- * @prim:	Primitive element, index form
- * @iprim:	prim-th root of 1, index form
- * @gfpoly:	The primitive generator polynominal
- * @gffunc:	Function to generate the field, if non-canonical representation
- * @users:	Users of this structure
- * @list:	List entry for the rs control list
-*/
-struct rs_control {
-	int 		mm;
-	int 		nn;
-	uint16_t	*alpha_to;
-	uint16_t	*index_of;
-	uint16_t	*genpoly;
-	int 		nroots;
-	int 		fcr;
-	int 		prim;
-	int 		iprim;
-	int		gfpoly;
-	int		(*gffunc)(int);
-	int		users;
-	struct list_head list;
-};
-
-/* General purpose RS codec, 8-bit data width, symbol width 1-15 bit  */
-#ifdef CONFIG_REED_SOLOMON_ENC8
-int encode_rs8(struct rs_control *rs, uint8_t *data, int len, uint16_t *par,
-	       uint16_t invmsk);
-#endif
-#ifdef CONFIG_REED_SOLOMON_DEC8
-int decode_rs8(struct rs_control *rs, uint8_t *data, uint16_t *par, int len,
-		uint16_t *s, int no_eras, int *eras_pos, uint16_t invmsk,
-	       uint16_t *corr);
-#endif
-
-/* General purpose RS codec, 16-bit data width, symbol width 1-15 bit  */
-#ifdef CONFIG_REED_SOLOMON_ENC16
-int encode_rs16(struct rs_control *rs, uint16_t *data, int len, uint16_t *par,
-		uint16_t invmsk);
-#endif
-#ifdef CONFIG_REED_SOLOMON_DEC16
-int decode_rs16(struct rs_control *rs, uint16_t *data, uint16_t *par, int len,
-		uint16_t *s, int no_eras, int *eras_pos, uint16_t invmsk,
-		uint16_t *corr);
-#endif
-
-/* Create or get a matching rs control structure */
-struct rs_control *init_rs(int symsize, int gfpoly, int fcr, int prim,
-			   int nroots);
-struct rs_control *init_rs_non_canonical(int symsize, int (*func)(int),
-                                         int fcr, int prim, int nroots);
-
-/* Release a rs control structure */
-void free_rs(struct rs_control *rs);
-
-/** modulo replacement for galois field arithmetics
- *
- *  @rs:	the rs control structure
- *  @x:		the value to reduce
- *
- *  where
- *  rs->mm = number of bits per symbol
- *  rs->nn = (2^rs->mm) - 1
- *
- *  Simple arithmetic modulo would return a wrong result for values
- *  >= 3 * rs->nn
-*/
-static inline int rs_modnn(struct rs_control *rs, int x)
-{
-	while (x >= rs->nn) {
-		x -= rs->nn;
-		x = (x >> rs->mm) + (x & rs->nn);
-	}
-	return x;
-}
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/rtc-v3020.h b/ANDROID_3.4.5/include/linux/rtc-v3020.h
deleted file mode 100644
index e55d82ce..00000000
--- a/ANDROID_3.4.5/include/linux/rtc-v3020.h
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- * v3020.h - Registers definition and platform data structure for the v3020 RTC.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2006, 8D Technologies inc.
- */
-#ifndef __LINUX_V3020_H
-#define __LINUX_V3020_H
-
-/* The v3020 has only one data pin but which one
- * is used depends on the board. */
-struct v3020_platform_data {
-	int leftshift; /* (1<<(leftshift)) & readl() */
-
-	unsigned int use_gpio:1;
-	unsigned int gpio_cs;
-	unsigned int gpio_wr;
-	unsigned int gpio_rd;
-	unsigned int gpio_io;
-};
-
-#define V3020_STATUS_0	0x00
-#define V3020_STATUS_1	0x01
-#define V3020_SECONDS	0x02
-#define V3020_MINUTES	0x03
-#define V3020_HOURS		0x04
-#define V3020_MONTH_DAY	0x05
-#define V3020_MONTH		0x06
-#define V3020_YEAR		0x07
-#define V3020_WEEK_DAY	0x08
-#define V3020_WEEK		0x09
-
-#define V3020_IS_COMMAND(val) ((val)>=0x0E)
-
-#define V3020_CMD_RAM2CLOCK	0x0E
-#define V3020_CMD_CLOCK2RAM	0x0F
-
-#endif /* __LINUX_V3020_H */
diff --git a/ANDROID_3.4.5/include/linux/rtc.h b/ANDROID_3.4.5/include/linux/rtc.h
deleted file mode 100644
index fcabfb48..00000000
--- a/ANDROID_3.4.5/include/linux/rtc.h
+++ /dev/null
@@ -1,284 +0,0 @@
-/*
- * Generic RTC interface.
- * This version contains the part of the user interface to the Real Time Clock
- * service. It is used with both the legacy mc146818 and also  EFI
- * Struct rtc_time and first 12 ioctl by Paul Gortmaker, 1996 - separated out
- * from <linux/mc146818rtc.h> to this file for 2.4 kernels.
- *
- * Copyright (C) 1999 Hewlett-Packard Co.
- * Copyright (C) 1999 Stephane Eranian <eranian@hpl.hp.com>
- */
-#ifndef _LINUX_RTC_H_
-#define _LINUX_RTC_H_
-
-/*
- * The struct used to pass data via the following ioctl. Similar to the
- * struct tm in <time.h>, but it needs to be here so that the kernel
- * source is self contained, allowing cross-compiles, etc. etc.
- */
-
-struct rtc_time {
-	int tm_sec;
-	int tm_min;
-	int tm_hour;
-	int tm_mday;
-	int tm_mon;
-	int tm_year;
-	int tm_wday;
-	int tm_yday;
-	int tm_isdst;
-};
-
-/*
- * This data structure is inspired by the EFI (v0.92) wakeup
- * alarm API.
- */
-struct rtc_wkalrm {
-	unsigned char enabled;	/* 0 = alarm disabled, 1 = alarm enabled */
-	unsigned char pending;  /* 0 = alarm not pending, 1 = alarm pending */
-	struct rtc_time time;	/* time the alarm is set to */
-};
-
-/*
- * Data structure to control PLL correction some better RTC feature
- * pll_value is used to get or set current value of correction,
- * the rest of the struct is used to query HW capabilities.
- * This is modeled after the RTC used in Q40/Q60 computers but
- * should be sufficiently flexible for other devices
- *
- * +ve pll_value means clock will run faster by
- *   pll_value*pll_posmult/pll_clock
- * -ve pll_value means clock will run slower by
- *   pll_value*pll_negmult/pll_clock
- */
-
-struct rtc_pll_info {
-	int pll_ctrl;       /* placeholder for fancier control */
-	int pll_value;      /* get/set correction value */
-	int pll_max;        /* max +ve (faster) adjustment value */
-	int pll_min;        /* max -ve (slower) adjustment value */
-	int pll_posmult;    /* factor for +ve correction */
-	int pll_negmult;    /* factor for -ve correction */
-	long pll_clock;     /* base PLL frequency */
-};
-
-/*
- * ioctl calls that are permitted to the /dev/rtc interface, if
- * any of the RTC drivers are enabled.
- */
-
-#define RTC_AIE_ON	_IO('p', 0x01)	/* Alarm int. enable on		*/
-#define RTC_AIE_OFF	_IO('p', 0x02)	/* ... off			*/
-#define RTC_UIE_ON	_IO('p', 0x03)	/* Update int. enable on	*/
-#define RTC_UIE_OFF	_IO('p', 0x04)	/* ... off			*/
-#define RTC_PIE_ON	_IO('p', 0x05)	/* Periodic int. enable on	*/
-#define RTC_PIE_OFF	_IO('p', 0x06)	/* ... off			*/
-#define RTC_WIE_ON	_IO('p', 0x0f)  /* Watchdog int. enable on	*/
-#define RTC_WIE_OFF	_IO('p', 0x10)  /* ... off			*/
-
-#define RTC_ALM_SET	_IOW('p', 0x07, struct rtc_time) /* Set alarm time  */
-#define RTC_ALM_READ	_IOR('p', 0x08, struct rtc_time) /* Read alarm time */
-#define RTC_RD_TIME	_IOR('p', 0x09, struct rtc_time) /* Read RTC time   */
-#define RTC_SET_TIME	_IOW('p', 0x0a, struct rtc_time) /* Set RTC time    */
-#define RTC_IRQP_READ	_IOR('p', 0x0b, unsigned long)	 /* Read IRQ rate   */
-#define RTC_IRQP_SET	_IOW('p', 0x0c, unsigned long)	 /* Set IRQ rate    */
-#define RTC_EPOCH_READ	_IOR('p', 0x0d, unsigned long)	 /* Read epoch      */
-#define RTC_EPOCH_SET	_IOW('p', 0x0e, unsigned long)	 /* Set epoch       */
-
-#define RTC_WKALM_SET	_IOW('p', 0x0f, struct rtc_wkalrm)/* Set wakeup alarm*/
-#define RTC_WKALM_RD	_IOR('p', 0x10, struct rtc_wkalrm)/* Get wakeup alarm*/
-
-#define RTC_PLL_GET	_IOR('p', 0x11, struct rtc_pll_info)  /* Get PLL correction */
-#define RTC_PLL_SET	_IOW('p', 0x12, struct rtc_pll_info)  /* Set PLL correction */
-
-/* interrupt flags */
-#define RTC_IRQF 0x80	/* Any of the following is active */
-#define RTC_PF 0x40	/* Periodic interrupt */
-#define RTC_AF 0x20	/* Alarm interrupt */
-#define RTC_UF 0x10	/* Update interrupt for 1Hz RTC */
-
-
-#define RTC_MAX_FREQ	8192
-
-#ifdef __KERNEL__
-
-#include <linux/types.h>
-#include <linux/interrupt.h>
-
-extern int rtc_month_days(unsigned int month, unsigned int year);
-extern int rtc_year_days(unsigned int day, unsigned int month, unsigned int year);
-extern int rtc_valid_tm(struct rtc_time *tm);
-extern int rtc_tm_to_time(struct rtc_time *tm, unsigned long *time);
-extern void rtc_time_to_tm(unsigned long time, struct rtc_time *tm);
-ktime_t rtc_tm_to_ktime(struct rtc_time tm);
-struct rtc_time rtc_ktime_to_tm(ktime_t kt);
-
-
-#include <linux/device.h>
-#include <linux/seq_file.h>
-#include <linux/cdev.h>
-#include <linux/poll.h>
-#include <linux/mutex.h>
-#include <linux/timerqueue.h>
-#include <linux/workqueue.h>
-
-extern struct class *rtc_class;
-
-/*
- * For these RTC methods the device parameter is the physical device
- * on whatever bus holds the hardware (I2C, Platform, SPI, etc), which
- * was passed to rtc_device_register().  Its driver_data normally holds
- * device state, including the rtc_device pointer for the RTC.
- *
- * Most of these methods are called with rtc_device.ops_lock held,
- * through the rtc_*(struct rtc_device *, ...) calls.
- *
- * The (current) exceptions are mostly filesystem hooks:
- *   - the proc() hook for procfs
- *   - non-ioctl() chardev hooks:  open(), release(), read_callback()
- *
- * REVISIT those periodic irq calls *do* have ops_lock when they're
- * issued through ioctl() ...
- */
-struct rtc_class_ops {
-	int (*open)(struct device *);
-	void (*release)(struct device *);
-	int (*ioctl)(struct device *, unsigned int, unsigned long);
-	int (*read_time)(struct device *, struct rtc_time *);
-	int (*set_time)(struct device *, struct rtc_time *);
-	int (*read_alarm)(struct device *, struct rtc_wkalrm *);
-	int (*set_alarm)(struct device *, struct rtc_wkalrm *);
-	int (*proc)(struct device *, struct seq_file *);
-	int (*set_mmss)(struct device *, unsigned long secs);
-	int (*read_callback)(struct device *, int data);
-	int (*alarm_irq_enable)(struct device *, unsigned int enabled);
-};
-
-#define RTC_DEVICE_NAME_SIZE 20
-typedef struct rtc_task {
-	void (*func)(void *private_data);
-	void *private_data;
-} rtc_task_t;
-
-
-struct rtc_timer {
-	struct rtc_task	task;
-	struct timerqueue_node node;
-	ktime_t period;
-	int enabled;
-};
-
-
-/* flags */
-#define RTC_DEV_BUSY 0
-
-struct rtc_device
-{
-	struct device dev;
-	struct module *owner;
-
-	int id;
-	char name[RTC_DEVICE_NAME_SIZE];
-
-	const struct rtc_class_ops *ops;
-	struct mutex ops_lock;
-
-	struct cdev char_dev;
-	unsigned long flags;
-
-	unsigned long irq_data;
-	spinlock_t irq_lock;
-	wait_queue_head_t irq_queue;
-	struct fasync_struct *async_queue;
-
-	struct rtc_task *irq_task;
-	spinlock_t irq_task_lock;
-	int irq_freq;
-	int max_user_freq;
-
-	struct timerqueue_head timerqueue;
-	struct rtc_timer aie_timer;
-	struct rtc_timer uie_rtctimer;
-	struct hrtimer pie_timer; /* sub second exp, so needs hrtimer */
-	int pie_enabled;
-	struct work_struct irqwork;
-	/* Some hardware can't support UIE mode */
-	int uie_unsupported;
-
-#ifdef CONFIG_RTC_INTF_DEV_UIE_EMUL
-	struct work_struct uie_task;
-	struct timer_list uie_timer;
-	/* Those fields are protected by rtc->irq_lock */
-	unsigned int oldsecs;
-	unsigned int uie_irq_active:1;
-	unsigned int stop_uie_polling:1;
-	unsigned int uie_task_active:1;
-	unsigned int uie_timer_active:1;
-#endif
-};
-#define to_rtc_device(d) container_of(d, struct rtc_device, dev)
-
-extern struct rtc_device *rtc_device_register(const char *name,
-					struct device *dev,
-					const struct rtc_class_ops *ops,
-					struct module *owner);
-extern void rtc_device_unregister(struct rtc_device *rtc);
-
-extern int rtc_read_time(struct rtc_device *rtc, struct rtc_time *tm);
-extern int rtc_set_time(struct rtc_device *rtc, struct rtc_time *tm);
-extern int rtc_set_mmss(struct rtc_device *rtc, unsigned long secs);
-int __rtc_read_alarm(struct rtc_device *rtc, struct rtc_wkalrm *alarm);
-extern int rtc_read_alarm(struct rtc_device *rtc,
-			struct rtc_wkalrm *alrm);
-extern int rtc_set_alarm(struct rtc_device *rtc,
-				struct rtc_wkalrm *alrm);
-extern int rtc_initialize_alarm(struct rtc_device *rtc,
-				struct rtc_wkalrm *alrm);
-extern void rtc_update_irq(struct rtc_device *rtc,
-			unsigned long num, unsigned long events);
-
-extern struct rtc_device *rtc_class_open(char *name);
-extern void rtc_class_close(struct rtc_device *rtc);
-
-extern int rtc_irq_register(struct rtc_device *rtc,
-				struct rtc_task *task);
-extern void rtc_irq_unregister(struct rtc_device *rtc,
-				struct rtc_task *task);
-extern int rtc_irq_set_state(struct rtc_device *rtc,
-				struct rtc_task *task, int enabled);
-extern int rtc_irq_set_freq(struct rtc_device *rtc,
-				struct rtc_task *task, int freq);
-extern int rtc_update_irq_enable(struct rtc_device *rtc, unsigned int enabled);
-extern int rtc_alarm_irq_enable(struct rtc_device *rtc, unsigned int enabled);
-extern int rtc_dev_update_irq_enable_emul(struct rtc_device *rtc,
-						unsigned int enabled);
-
-void rtc_handle_legacy_irq(struct rtc_device *rtc, int num, int mode);
-void rtc_aie_update_irq(void *private);
-void rtc_uie_update_irq(void *private);
-enum hrtimer_restart rtc_pie_update_irq(struct hrtimer *timer);
-
-int rtc_register(rtc_task_t *task);
-int rtc_unregister(rtc_task_t *task);
-int rtc_control(rtc_task_t *t, unsigned int cmd, unsigned long arg);
-
-void rtc_timer_init(struct rtc_timer *timer, void (*f)(void* p), void* data);
-int rtc_timer_start(struct rtc_device *rtc, struct rtc_timer* timer,
-			ktime_t expires, ktime_t period);
-int rtc_timer_cancel(struct rtc_device *rtc, struct rtc_timer* timer);
-void rtc_timer_do_work(struct work_struct *work);
-
-static inline bool is_leap_year(unsigned int year)
-{
-	return (!(year % 4) && (year % 100)) || !(year % 400);
-}
-
-#ifdef CONFIG_RTC_HCTOSYS
-extern int rtc_hctosys_ret;
-#else
-#define rtc_hctosys_ret -ENODEV
-#endif
-
-#endif /* __KERNEL__ */
-
-#endif /* _LINUX_RTC_H_ */
diff --git a/ANDROID_3.4.5/include/linux/rtc/m48t59.h b/ANDROID_3.4.5/include/linux/rtc/m48t59.h
deleted file mode 100644
index 6fc96145..00000000
--- a/ANDROID_3.4.5/include/linux/rtc/m48t59.h
+++ /dev/null
@@ -1,64 +0,0 @@
-/*
- * include/linux/rtc/m48t59.h
- *
- * Definitions for the platform data of m48t59 RTC chip driver.
- *
- * Copyright (c) 2007 Wind River Systems, Inc.
- *
- * Mark Zhan <rongkai.zhan@windriver.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef _LINUX_RTC_M48T59_H_
-#define _LINUX_RTC_M48T59_H_
-
-/*
- * M48T59 Register Offset
- */
-#define M48T59_YEAR		0xf
-#define M48T59_MONTH		0xe
-#define M48T59_MDAY		0xd	/* Day of Month */
-#define M48T59_WDAY		0xc	/* Day of Week */
-#define M48T59_WDAY_CB			0x20	/* Century Bit */
-#define M48T59_WDAY_CEB			0x10	/* Century Enable Bit */
-#define M48T59_HOUR		0xb
-#define M48T59_MIN		0xa
-#define M48T59_SEC		0x9
-#define M48T59_CNTL		0x8
-#define M48T59_CNTL_READ		0x40
-#define M48T59_CNTL_WRITE		0x80
-#define M48T59_WATCHDOG		0x7
-#define M48T59_INTR		0x6
-#define M48T59_INTR_AFE			0x80	/* Alarm Interrupt Enable */
-#define M48T59_INTR_ABE			0x20
-#define M48T59_ALARM_DATE	0x5
-#define M48T59_ALARM_HOUR	0x4
-#define M48T59_ALARM_MIN	0x3
-#define M48T59_ALARM_SEC	0x2
-#define M48T59_UNUSED		0x1
-#define M48T59_FLAGS		0x0
-#define M48T59_FLAGS_WDT		0x80	/* watchdog timer expired */
-#define M48T59_FLAGS_AF			0x40	/* alarm */
-#define M48T59_FLAGS_BF			0x10	/* low battery */
-
-#define M48T59RTC_TYPE_M48T59	0 /* to keep compatibility */
-#define M48T59RTC_TYPE_M48T02	1
-#define M48T59RTC_TYPE_M48T08	2
-
-struct m48t59_plat_data {
-	/* The method to access M48T59 registers */
-	void (*write_byte)(struct device *dev, u32 ofs, u8 val);
-	unsigned char (*read_byte)(struct device *dev, u32 ofs);
-
-	int type; /* RTC model */
-
-	/* ioaddr mapped externally */
-	void __iomem *ioaddr;
-	/* offset to RTC registers, automatically set according to the type */
-	unsigned int offset;
-};
-
-#endif /* _LINUX_RTC_M48T59_H_ */
diff --git a/ANDROID_3.4.5/include/linux/rtc/sirfsoc_rtciobrg.h b/ANDROID_3.4.5/include/linux/rtc/sirfsoc_rtciobrg.h
deleted file mode 100644
index 2c92e1c8..00000000
--- a/ANDROID_3.4.5/include/linux/rtc/sirfsoc_rtciobrg.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- * RTC I/O Bridge interfaces for CSR SiRFprimaII
- * ARM access the registers of SYSRTC, GPSRTC and PWRC through this module
- *
- * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
- *
- * Licensed under GPLv2 or later.
- */
-#ifndef _SIRFSOC_RTC_IOBRG_H_
-#define _SIRFSOC_RTC_IOBRG_H_
-
-extern void sirfsoc_rtc_iobrg_besyncing(void);
-
-extern u32 sirfsoc_rtc_iobrg_readl(u32 addr);
-
-extern void sirfsoc_rtc_iobrg_writel(u32 val, u32 addr);
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/rtmutex.h b/ANDROID_3.4.5/include/linux/rtmutex.h
deleted file mode 100644
index de171342..00000000
--- a/ANDROID_3.4.5/include/linux/rtmutex.h
+++ /dev/null
@@ -1,109 +0,0 @@
-/*
- * RT Mutexes: blocking mutual exclusion locks with PI support
- *
- * started by Ingo Molnar and Thomas Gleixner:
- *
- *  Copyright (C) 2004-2006 Red Hat, Inc., Ingo Molnar <mingo@redhat.com>
- *  Copyright (C) 2006, Timesys Corp., Thomas Gleixner <tglx@timesys.com>
- *
- * This file contains the public data structure and API definitions.
- */
-
-#ifndef __LINUX_RT_MUTEX_H
-#define __LINUX_RT_MUTEX_H
-
-#include <linux/linkage.h>
-#include <linux/plist.h>
-#include <linux/spinlock_types.h>
-
-extern int max_lock_depth; /* for sysctl */
-
-/**
- * The rt_mutex structure
- *
- * @wait_lock:	spinlock to protect the structure
- * @wait_list:	pilist head to enqueue waiters in priority order
- * @owner:	the mutex owner
- */
-struct rt_mutex {
-	raw_spinlock_t		wait_lock;
-	struct plist_head	wait_list;
-	struct task_struct	*owner;
-#ifdef CONFIG_DEBUG_RT_MUTEXES
-	int			save_state;
-	const char 		*name, *file;
-	int			line;
-	void			*magic;
-#endif
-};
-
-struct rt_mutex_waiter;
-struct hrtimer_sleeper;
-
-#ifdef CONFIG_DEBUG_RT_MUTEXES
- extern int rt_mutex_debug_check_no_locks_freed(const void *from,
-						unsigned long len);
- extern void rt_mutex_debug_check_no_locks_held(struct task_struct *task);
-#else
- static inline int rt_mutex_debug_check_no_locks_freed(const void *from,
-						       unsigned long len)
- {
-	return 0;
- }
-# define rt_mutex_debug_check_no_locks_held(task)	do { } while (0)
-#endif
-
-#ifdef CONFIG_DEBUG_RT_MUTEXES
-# define __DEBUG_RT_MUTEX_INITIALIZER(mutexname) \
-	, .name = #mutexname, .file = __FILE__, .line = __LINE__
-# define rt_mutex_init(mutex)			__rt_mutex_init(mutex, __func__)
- extern void rt_mutex_debug_task_free(struct task_struct *tsk);
-#else
-# define __DEBUG_RT_MUTEX_INITIALIZER(mutexname)
-# define rt_mutex_init(mutex)			__rt_mutex_init(mutex, NULL)
-# define rt_mutex_debug_task_free(t)			do { } while (0)
-#endif
-
-#define __RT_MUTEX_INITIALIZER(mutexname) \
-	{ .wait_lock = __RAW_SPIN_LOCK_UNLOCKED(mutexname.wait_lock) \
-	, .wait_list = PLIST_HEAD_INIT(mutexname.wait_list) \
-	, .owner = NULL \
-	__DEBUG_RT_MUTEX_INITIALIZER(mutexname)}
-
-#define DEFINE_RT_MUTEX(mutexname) \
-	struct rt_mutex mutexname = __RT_MUTEX_INITIALIZER(mutexname)
-
-/**
- * rt_mutex_is_locked - is the mutex locked
- * @lock: the mutex to be queried
- *
- * Returns 1 if the mutex is locked, 0 if unlocked.
- */
-static inline int rt_mutex_is_locked(struct rt_mutex *lock)
-{
-	return lock->owner != NULL;
-}
-
-extern void __rt_mutex_init(struct rt_mutex *lock, const char *name);
-extern void rt_mutex_destroy(struct rt_mutex *lock);
-
-extern void rt_mutex_lock(struct rt_mutex *lock);
-extern int rt_mutex_lock_interruptible(struct rt_mutex *lock,
-						int detect_deadlock);
-extern int rt_mutex_timed_lock(struct rt_mutex *lock,
-					struct hrtimer_sleeper *timeout,
-					int detect_deadlock);
-
-extern int rt_mutex_trylock(struct rt_mutex *lock);
-
-extern void rt_mutex_unlock(struct rt_mutex *lock);
-
-#ifdef CONFIG_RT_MUTEXES
-# define INIT_RT_MUTEXES(tsk)						\
-	.pi_waiters	= PLIST_HEAD_INIT(tsk.pi_waiters),	\
-	INIT_RT_MUTEX_DEBUG(tsk)
-#else
-# define INIT_RT_MUTEXES(tsk)
-#endif
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/rtnetlink.h b/ANDROID_3.4.5/include/linux/rtnetlink.h
deleted file mode 100644
index 577592ea..00000000
--- a/ANDROID_3.4.5/include/linux/rtnetlink.h
+++ /dev/null
@@ -1,807 +0,0 @@
-#ifndef __LINUX_RTNETLINK_H
-#define __LINUX_RTNETLINK_H
-
-#include <linux/types.h>
-#include <linux/netlink.h>
-#include <linux/if_link.h>
-#include <linux/if_addr.h>
-#include <linux/neighbour.h>
-
-/* rtnetlink families. Values up to 127 are reserved for real address
- * families, values above 128 may be used arbitrarily.
- */
-#define RTNL_FAMILY_IPMR		128
-#define RTNL_FAMILY_IP6MR		129
-#define RTNL_FAMILY_MAX			129
-
-/****
- *		Routing/neighbour discovery messages.
- ****/
-
-/* Types of messages */
-
-enum {
-	RTM_BASE	= 16,
-#define RTM_BASE	RTM_BASE
-
-	RTM_NEWLINK	= 16,
-#define RTM_NEWLINK	RTM_NEWLINK
-	RTM_DELLINK,
-#define RTM_DELLINK	RTM_DELLINK
-	RTM_GETLINK,
-#define RTM_GETLINK	RTM_GETLINK
-	RTM_SETLINK,
-#define RTM_SETLINK	RTM_SETLINK
-
-	RTM_NEWADDR	= 20,
-#define RTM_NEWADDR	RTM_NEWADDR
-	RTM_DELADDR,
-#define RTM_DELADDR	RTM_DELADDR
-	RTM_GETADDR,
-#define RTM_GETADDR	RTM_GETADDR
-
-	RTM_NEWROUTE	= 24,
-#define RTM_NEWROUTE	RTM_NEWROUTE
-	RTM_DELROUTE,
-#define RTM_DELROUTE	RTM_DELROUTE
-	RTM_GETROUTE,
-#define RTM_GETROUTE	RTM_GETROUTE
-
-	RTM_NEWNEIGH	= 28,
-#define RTM_NEWNEIGH	RTM_NEWNEIGH
-	RTM_DELNEIGH,
-#define RTM_DELNEIGH	RTM_DELNEIGH
-	RTM_GETNEIGH,
-#define RTM_GETNEIGH	RTM_GETNEIGH
-
-	RTM_NEWRULE	= 32,
-#define RTM_NEWRULE	RTM_NEWRULE
-	RTM_DELRULE,
-#define RTM_DELRULE	RTM_DELRULE
-	RTM_GETRULE,
-#define RTM_GETRULE	RTM_GETRULE
-
-	RTM_NEWQDISC	= 36,
-#define RTM_NEWQDISC	RTM_NEWQDISC
-	RTM_DELQDISC,
-#define RTM_DELQDISC	RTM_DELQDISC
-	RTM_GETQDISC,
-#define RTM_GETQDISC	RTM_GETQDISC
-
-	RTM_NEWTCLASS	= 40,
-#define RTM_NEWTCLASS	RTM_NEWTCLASS
-	RTM_DELTCLASS,
-#define RTM_DELTCLASS	RTM_DELTCLASS
-	RTM_GETTCLASS,
-#define RTM_GETTCLASS	RTM_GETTCLASS
-
-	RTM_NEWTFILTER	= 44,
-#define RTM_NEWTFILTER	RTM_NEWTFILTER
-	RTM_DELTFILTER,
-#define RTM_DELTFILTER	RTM_DELTFILTER
-	RTM_GETTFILTER,
-#define RTM_GETTFILTER	RTM_GETTFILTER
-
-	RTM_NEWACTION	= 48,
-#define RTM_NEWACTION   RTM_NEWACTION
-	RTM_DELACTION,
-#define RTM_DELACTION   RTM_DELACTION
-	RTM_GETACTION,
-#define RTM_GETACTION   RTM_GETACTION
-
-	RTM_NEWPREFIX	= 52,
-#define RTM_NEWPREFIX	RTM_NEWPREFIX
-
-	RTM_GETMULTICAST = 58,
-#define RTM_GETMULTICAST RTM_GETMULTICAST
-
-	RTM_GETANYCAST	= 62,
-#define RTM_GETANYCAST	RTM_GETANYCAST
-
-	RTM_NEWNEIGHTBL	= 64,
-#define RTM_NEWNEIGHTBL	RTM_NEWNEIGHTBL
-	RTM_GETNEIGHTBL	= 66,
-#define RTM_GETNEIGHTBL	RTM_GETNEIGHTBL
-	RTM_SETNEIGHTBL,
-#define RTM_SETNEIGHTBL	RTM_SETNEIGHTBL
-
-	RTM_NEWNDUSEROPT = 68,
-#define RTM_NEWNDUSEROPT RTM_NEWNDUSEROPT
-
-	RTM_NEWADDRLABEL = 72,
-#define RTM_NEWADDRLABEL RTM_NEWADDRLABEL
-	RTM_DELADDRLABEL,
-#define RTM_DELADDRLABEL RTM_DELADDRLABEL
-	RTM_GETADDRLABEL,
-#define RTM_GETADDRLABEL RTM_GETADDRLABEL
-
-	RTM_GETDCB = 78,
-#define RTM_GETDCB RTM_GETDCB
-	RTM_SETDCB,
-#define RTM_SETDCB RTM_SETDCB
-
-	__RTM_MAX,
-#define RTM_MAX		(((__RTM_MAX + 3) & ~3) - 1)
-};
-
-#define RTM_NR_MSGTYPES	(RTM_MAX + 1 - RTM_BASE)
-#define RTM_NR_FAMILIES	(RTM_NR_MSGTYPES >> 2)
-#define RTM_FAM(cmd)	(((cmd) - RTM_BASE) >> 2)
-
-/* 
-   Generic structure for encapsulation of optional route information.
-   It is reminiscent of sockaddr, but with sa_family replaced
-   with attribute type.
- */
-
-struct rtattr {
-	unsigned short	rta_len;
-	unsigned short	rta_type;
-};
-
-/* Macros to handle rtattributes */
-
-#define RTA_ALIGNTO	4
-#define RTA_ALIGN(len) ( ((len)+RTA_ALIGNTO-1) & ~(RTA_ALIGNTO-1) )
-#define RTA_OK(rta,len) ((len) >= (int)sizeof(struct rtattr) && \
-			 (rta)->rta_len >= sizeof(struct rtattr) && \
-			 (rta)->rta_len <= (len))
-#define RTA_NEXT(rta,attrlen)	((attrlen) -= RTA_ALIGN((rta)->rta_len), \
-				 (struct rtattr*)(((char*)(rta)) + RTA_ALIGN((rta)->rta_len)))
-#define RTA_LENGTH(len)	(RTA_ALIGN(sizeof(struct rtattr)) + (len))
-#define RTA_SPACE(len)	RTA_ALIGN(RTA_LENGTH(len))
-#define RTA_DATA(rta)   ((void*)(((char*)(rta)) + RTA_LENGTH(0)))
-#define RTA_PAYLOAD(rta) ((int)((rta)->rta_len) - RTA_LENGTH(0))
-
-
-
-
-/******************************************************************************
- *		Definitions used in routing table administration.
- ****/
-
-struct rtmsg {
-	unsigned char		rtm_family;
-	unsigned char		rtm_dst_len;
-	unsigned char		rtm_src_len;
-	unsigned char		rtm_tos;
-
-	unsigned char		rtm_table;	/* Routing table id */
-	unsigned char		rtm_protocol;	/* Routing protocol; see below	*/
-	unsigned char		rtm_scope;	/* See below */	
-	unsigned char		rtm_type;	/* See below	*/
-
-	unsigned		rtm_flags;
-};
-
-/* rtm_type */
-
-enum {
-	RTN_UNSPEC,
-	RTN_UNICAST,		/* Gateway or direct route	*/
-	RTN_LOCAL,		/* Accept locally		*/
-	RTN_BROADCAST,		/* Accept locally as broadcast,
-				   send as broadcast */
-	RTN_ANYCAST,		/* Accept locally as broadcast,
-				   but send as unicast */
-	RTN_MULTICAST,		/* Multicast route		*/
-	RTN_BLACKHOLE,		/* Drop				*/
-	RTN_UNREACHABLE,	/* Destination is unreachable   */
-	RTN_PROHIBIT,		/* Administratively prohibited	*/
-	RTN_THROW,		/* Not in this table		*/
-	RTN_NAT,		/* Translate this address	*/
-	RTN_XRESOLVE,		/* Use external resolver	*/
-	__RTN_MAX
-};
-
-#define RTN_MAX (__RTN_MAX - 1)
-
-
-/* rtm_protocol */
-
-#define RTPROT_UNSPEC	0
-#define RTPROT_REDIRECT	1	/* Route installed by ICMP redirects;
-				   not used by current IPv4 */
-#define RTPROT_KERNEL	2	/* Route installed by kernel		*/
-#define RTPROT_BOOT	3	/* Route installed during boot		*/
-#define RTPROT_STATIC	4	/* Route installed by administrator	*/
-
-/* Values of protocol >= RTPROT_STATIC are not interpreted by kernel;
-   they are just passed from user and back as is.
-   It will be used by hypothetical multiple routing daemons.
-   Note that protocol values should be standardized in order to
-   avoid conflicts.
- */
-
-#define RTPROT_GATED	8	/* Apparently, GateD */
-#define RTPROT_RA	9	/* RDISC/ND router advertisements */
-#define RTPROT_MRT	10	/* Merit MRT */
-#define RTPROT_ZEBRA	11	/* Zebra */
-#define RTPROT_BIRD	12	/* BIRD */
-#define RTPROT_DNROUTED	13	/* DECnet routing daemon */
-#define RTPROT_XORP	14	/* XORP */
-#define RTPROT_NTK	15	/* Netsukuku */
-#define RTPROT_DHCP	16      /* DHCP client */
-
-/* rtm_scope
-
-   Really it is not scope, but sort of distance to the destination.
-   NOWHERE are reserved for not existing destinations, HOST is our
-   local addresses, LINK are destinations, located on directly attached
-   link and UNIVERSE is everywhere in the Universe.
-
-   Intermediate values are also possible f.e. interior routes
-   could be assigned a value between UNIVERSE and LINK.
-*/
-
-enum rt_scope_t {
-	RT_SCOPE_UNIVERSE=0,
-/* User defined values  */
-	RT_SCOPE_SITE=200,
-	RT_SCOPE_LINK=253,
-	RT_SCOPE_HOST=254,
-	RT_SCOPE_NOWHERE=255
-};
-
-/* rtm_flags */
-
-#define RTM_F_NOTIFY		0x100	/* Notify user of route change	*/
-#define RTM_F_CLONED		0x200	/* This route is cloned		*/
-#define RTM_F_EQUALIZE		0x400	/* Multipath equalizer: NI	*/
-#define RTM_F_PREFIX		0x800	/* Prefix addresses		*/
-
-/* Reserved table identifiers */
-
-enum rt_class_t {
-	RT_TABLE_UNSPEC=0,
-/* User defined values */
-	RT_TABLE_COMPAT=252,
-	RT_TABLE_DEFAULT=253,
-	RT_TABLE_MAIN=254,
-	RT_TABLE_LOCAL=255,
-	RT_TABLE_MAX=0xFFFFFFFF
-};
-
-
-/* Routing message attributes */
-
-enum rtattr_type_t {
-	RTA_UNSPEC,
-	RTA_DST,
-	RTA_SRC,
-	RTA_IIF,
-	RTA_OIF,
-	RTA_GATEWAY,
-	RTA_PRIORITY,
-	RTA_PREFSRC,
-	RTA_METRICS,
-	RTA_MULTIPATH,
-	RTA_PROTOINFO, /* no longer used */
-	RTA_FLOW,
-	RTA_CACHEINFO,
-	RTA_SESSION, /* no longer used */
-	RTA_MP_ALGO, /* no longer used */
-	RTA_TABLE,
-	RTA_MARK,
-	__RTA_MAX
-};
-
-#define RTA_MAX (__RTA_MAX - 1)
-
-#define RTM_RTA(r)  ((struct rtattr*)(((char*)(r)) + NLMSG_ALIGN(sizeof(struct rtmsg))))
-#define RTM_PAYLOAD(n) NLMSG_PAYLOAD(n,sizeof(struct rtmsg))
-
-/* RTM_MULTIPATH --- array of struct rtnexthop.
- *
- * "struct rtnexthop" describes all necessary nexthop information,
- * i.e. parameters of path to a destination via this nexthop.
- *
- * At the moment it is impossible to set different prefsrc, mtu, window
- * and rtt for different paths from multipath.
- */
-
-struct rtnexthop {
-	unsigned short		rtnh_len;
-	unsigned char		rtnh_flags;
-	unsigned char		rtnh_hops;
-	int			rtnh_ifindex;
-};
-
-/* rtnh_flags */
-
-#define RTNH_F_DEAD		1	/* Nexthop is dead (used by multipath)	*/
-#define RTNH_F_PERVASIVE	2	/* Do recursive gateway lookup	*/
-#define RTNH_F_ONLINK		4	/* Gateway is forced on link	*/
-
-/* Macros to handle hexthops */
-
-#define RTNH_ALIGNTO	4
-#define RTNH_ALIGN(len) ( ((len)+RTNH_ALIGNTO-1) & ~(RTNH_ALIGNTO-1) )
-#define RTNH_OK(rtnh,len) ((rtnh)->rtnh_len >= sizeof(struct rtnexthop) && \
-			   ((int)(rtnh)->rtnh_len) <= (len))
-#define RTNH_NEXT(rtnh)	((struct rtnexthop*)(((char*)(rtnh)) + RTNH_ALIGN((rtnh)->rtnh_len)))
-#define RTNH_LENGTH(len) (RTNH_ALIGN(sizeof(struct rtnexthop)) + (len))
-#define RTNH_SPACE(len)	RTNH_ALIGN(RTNH_LENGTH(len))
-#define RTNH_DATA(rtnh)   ((struct rtattr*)(((char*)(rtnh)) + RTNH_LENGTH(0)))
-
-/* RTM_CACHEINFO */
-
-struct rta_cacheinfo {
-	__u32	rta_clntref;
-	__u32	rta_lastuse;
-	__s32	rta_expires;
-	__u32	rta_error;
-	__u32	rta_used;
-
-#define RTNETLINK_HAVE_PEERINFO 1
-	__u32	rta_id;
-	__u32	rta_ts;
-	__u32	rta_tsage;
-};
-
-/* RTM_METRICS --- array of struct rtattr with types of RTAX_* */
-
-enum {
-	RTAX_UNSPEC,
-#define RTAX_UNSPEC RTAX_UNSPEC
-	RTAX_LOCK,
-#define RTAX_LOCK RTAX_LOCK
-	RTAX_MTU,
-#define RTAX_MTU RTAX_MTU
-	RTAX_WINDOW,
-#define RTAX_WINDOW RTAX_WINDOW
-	RTAX_RTT,
-#define RTAX_RTT RTAX_RTT
-	RTAX_RTTVAR,
-#define RTAX_RTTVAR RTAX_RTTVAR
-	RTAX_SSTHRESH,
-#define RTAX_SSTHRESH RTAX_SSTHRESH
-	RTAX_CWND,
-#define RTAX_CWND RTAX_CWND
-	RTAX_ADVMSS,
-#define RTAX_ADVMSS RTAX_ADVMSS
-	RTAX_REORDERING,
-#define RTAX_REORDERING RTAX_REORDERING
-	RTAX_HOPLIMIT,
-#define RTAX_HOPLIMIT RTAX_HOPLIMIT
-	RTAX_INITCWND,
-#define RTAX_INITCWND RTAX_INITCWND
-	RTAX_FEATURES,
-#define RTAX_FEATURES RTAX_FEATURES
-	RTAX_RTO_MIN,
-#define RTAX_RTO_MIN RTAX_RTO_MIN
-	RTAX_INITRWND,
-#define RTAX_INITRWND RTAX_INITRWND
-	__RTAX_MAX
-};
-
-#define RTAX_MAX (__RTAX_MAX - 1)
-
-#define RTAX_FEATURE_ECN	0x00000001
-#define RTAX_FEATURE_SACK	0x00000002
-#define RTAX_FEATURE_TIMESTAMP	0x00000004
-#define RTAX_FEATURE_ALLFRAG	0x00000008
-
-struct rta_session {
-	__u8	proto;
-	__u8	pad1;
-	__u16	pad2;
-
-	union {
-		struct {
-			__u16	sport;
-			__u16	dport;
-		} ports;
-
-		struct {
-			__u8	type;
-			__u8	code;
-			__u16	ident;
-		} icmpt;
-
-		__u32		spi;
-	} u;
-};
-
-/****
- *		General form of address family dependent message.
- ****/
-
-struct rtgenmsg {
-	unsigned char		rtgen_family;
-};
-
-/*****************************************************************
- *		Link layer specific messages.
- ****/
-
-/* struct ifinfomsg
- * passes link level specific information, not dependent
- * on network protocol.
- */
-
-struct ifinfomsg {
-	unsigned char	ifi_family;
-	unsigned char	__ifi_pad;
-	unsigned short	ifi_type;		/* ARPHRD_* */
-	int		ifi_index;		/* Link index	*/
-	unsigned	ifi_flags;		/* IFF_* flags	*/
-	unsigned	ifi_change;		/* IFF_* change mask */
-};
-
-/********************************************************************
- *		prefix information 
- ****/
-
-struct prefixmsg {
-	unsigned char	prefix_family;
-	unsigned char	prefix_pad1;
-	unsigned short	prefix_pad2;
-	int		prefix_ifindex;
-	unsigned char	prefix_type;
-	unsigned char	prefix_len;
-	unsigned char	prefix_flags;
-	unsigned char	prefix_pad3;
-};
-
-enum 
-{
-	PREFIX_UNSPEC,
-	PREFIX_ADDRESS,
-	PREFIX_CACHEINFO,
-	__PREFIX_MAX
-};
-
-#define PREFIX_MAX	(__PREFIX_MAX - 1)
-
-struct prefix_cacheinfo {
-	__u32	preferred_time;
-	__u32	valid_time;
-};
-
-
-/*****************************************************************
- *		Traffic control messages.
- ****/
-
-struct tcmsg {
-	unsigned char	tcm_family;
-	unsigned char	tcm__pad1;
-	unsigned short	tcm__pad2;
-	int		tcm_ifindex;
-	__u32		tcm_handle;
-	__u32		tcm_parent;
-	__u32		tcm_info;
-};
-
-enum {
-	TCA_UNSPEC,
-	TCA_KIND,
-	TCA_OPTIONS,
-	TCA_STATS,
-	TCA_XSTATS,
-	TCA_RATE,
-	TCA_FCNT,
-	TCA_STATS2,
-	TCA_STAB,
-	__TCA_MAX
-};
-
-#define TCA_MAX (__TCA_MAX - 1)
-
-#define TCA_RTA(r)  ((struct rtattr*)(((char*)(r)) + NLMSG_ALIGN(sizeof(struct tcmsg))))
-#define TCA_PAYLOAD(n) NLMSG_PAYLOAD(n,sizeof(struct tcmsg))
-
-/********************************************************************
- *		Neighbor Discovery userland options
- ****/
-
-struct nduseroptmsg {
-	unsigned char	nduseropt_family;
-	unsigned char	nduseropt_pad1;
-	unsigned short	nduseropt_opts_len;	/* Total length of options */
-	int		nduseropt_ifindex;
-	__u8		nduseropt_icmp_type;
-	__u8		nduseropt_icmp_code;
-	unsigned short	nduseropt_pad2;
-	unsigned int	nduseropt_pad3;
-	/* Followed by one or more ND options */
-};
-
-enum {
-	NDUSEROPT_UNSPEC,
-	NDUSEROPT_SRCADDR,
-	__NDUSEROPT_MAX
-};
-
-#define NDUSEROPT_MAX	(__NDUSEROPT_MAX - 1)
-
-#ifndef __KERNEL__
-/* RTnetlink multicast groups - backwards compatibility for userspace */
-#define RTMGRP_LINK		1
-#define RTMGRP_NOTIFY		2
-#define RTMGRP_NEIGH		4
-#define RTMGRP_TC		8
-
-#define RTMGRP_IPV4_IFADDR	0x10
-#define RTMGRP_IPV4_MROUTE	0x20
-#define RTMGRP_IPV4_ROUTE	0x40
-#define RTMGRP_IPV4_RULE	0x80
-
-#define RTMGRP_IPV6_IFADDR	0x100
-#define RTMGRP_IPV6_MROUTE	0x200
-#define RTMGRP_IPV6_ROUTE	0x400
-#define RTMGRP_IPV6_IFINFO	0x800
-
-#define RTMGRP_DECnet_IFADDR    0x1000
-#define RTMGRP_DECnet_ROUTE     0x4000
-
-#define RTMGRP_IPV6_PREFIX	0x20000
-#endif
-
-/* RTnetlink multicast groups */
-enum rtnetlink_groups {
-	RTNLGRP_NONE,
-#define RTNLGRP_NONE		RTNLGRP_NONE
-	RTNLGRP_LINK,
-#define RTNLGRP_LINK		RTNLGRP_LINK
-	RTNLGRP_NOTIFY,
-#define RTNLGRP_NOTIFY		RTNLGRP_NOTIFY
-	RTNLGRP_NEIGH,
-#define RTNLGRP_NEIGH		RTNLGRP_NEIGH
-	RTNLGRP_TC,
-#define RTNLGRP_TC		RTNLGRP_TC
-	RTNLGRP_IPV4_IFADDR,
-#define RTNLGRP_IPV4_IFADDR	RTNLGRP_IPV4_IFADDR
-	RTNLGRP_IPV4_MROUTE,
-#define	RTNLGRP_IPV4_MROUTE	RTNLGRP_IPV4_MROUTE
-	RTNLGRP_IPV4_ROUTE,
-#define RTNLGRP_IPV4_ROUTE	RTNLGRP_IPV4_ROUTE
-	RTNLGRP_IPV4_RULE,
-#define RTNLGRP_IPV4_RULE	RTNLGRP_IPV4_RULE
-	RTNLGRP_IPV6_IFADDR,
-#define RTNLGRP_IPV6_IFADDR	RTNLGRP_IPV6_IFADDR
-	RTNLGRP_IPV6_MROUTE,
-#define RTNLGRP_IPV6_MROUTE	RTNLGRP_IPV6_MROUTE
-	RTNLGRP_IPV6_ROUTE,
-#define RTNLGRP_IPV6_ROUTE	RTNLGRP_IPV6_ROUTE
-	RTNLGRP_IPV6_IFINFO,
-#define RTNLGRP_IPV6_IFINFO	RTNLGRP_IPV6_IFINFO
-	RTNLGRP_DECnet_IFADDR,
-#define RTNLGRP_DECnet_IFADDR	RTNLGRP_DECnet_IFADDR
-	RTNLGRP_NOP2,
-	RTNLGRP_DECnet_ROUTE,
-#define RTNLGRP_DECnet_ROUTE	RTNLGRP_DECnet_ROUTE
-	RTNLGRP_DECnet_RULE,
-#define RTNLGRP_DECnet_RULE	RTNLGRP_DECnet_RULE
-	RTNLGRP_NOP4,
-	RTNLGRP_IPV6_PREFIX,
-#define RTNLGRP_IPV6_PREFIX	RTNLGRP_IPV6_PREFIX
-	RTNLGRP_IPV6_RULE,
-#define RTNLGRP_IPV6_RULE	RTNLGRP_IPV6_RULE
-	RTNLGRP_ND_USEROPT,
-#define RTNLGRP_ND_USEROPT	RTNLGRP_ND_USEROPT
-	RTNLGRP_PHONET_IFADDR,
-#define RTNLGRP_PHONET_IFADDR	RTNLGRP_PHONET_IFADDR
-	RTNLGRP_PHONET_ROUTE,
-#define RTNLGRP_PHONET_ROUTE	RTNLGRP_PHONET_ROUTE
-	RTNLGRP_DCB,
-#define RTNLGRP_DCB		RTNLGRP_DCB
-	__RTNLGRP_MAX
-};
-#define RTNLGRP_MAX	(__RTNLGRP_MAX - 1)
-
-/* TC action piece */
-struct tcamsg {
-	unsigned char	tca_family;
-	unsigned char	tca__pad1;
-	unsigned short	tca__pad2;
-};
-#define TA_RTA(r)  ((struct rtattr*)(((char*)(r)) + NLMSG_ALIGN(sizeof(struct tcamsg))))
-#define TA_PAYLOAD(n) NLMSG_PAYLOAD(n,sizeof(struct tcamsg))
-#define TCA_ACT_TAB 1 /* attr type must be >=1 */	
-#define TCAA_MAX 1
-
-/* New extended info filters for IFLA_EXT_MASK */
-#define RTEXT_FILTER_VF		(1 << 0)
-
-/* End of information exported to user level */
-
-#ifdef __KERNEL__
-
-#include <linux/mutex.h>
-#include <linux/netdevice.h>
-
-static __inline__ int rtattr_strcmp(const struct rtattr *rta, const char *str)
-{
-	int len = strlen(str) + 1;
-	return len > rta->rta_len || memcmp(RTA_DATA(rta), str, len);
-}
-
-extern int rtnetlink_send(struct sk_buff *skb, struct net *net, u32 pid, u32 group, int echo);
-extern int rtnl_unicast(struct sk_buff *skb, struct net *net, u32 pid);
-extern void rtnl_notify(struct sk_buff *skb, struct net *net, u32 pid,
-			u32 group, struct nlmsghdr *nlh, gfp_t flags);
-extern void rtnl_set_sk_err(struct net *net, u32 group, int error);
-extern int rtnetlink_put_metrics(struct sk_buff *skb, u32 *metrics);
-extern int rtnl_put_cacheinfo(struct sk_buff *skb, struct dst_entry *dst,
-			      u32 id, u32 ts, u32 tsage, long expires,
-			      u32 error);
-
-extern void __rta_fill(struct sk_buff *skb, int attrtype, int attrlen, const void *data);
-
-#define RTA_PUT(skb, attrtype, attrlen, data) \
-({	if (unlikely(skb_tailroom(skb) < (int)RTA_SPACE(attrlen))) \
-		 goto rtattr_failure; \
-   	__rta_fill(skb, attrtype, attrlen, data); }) 
-
-#define RTA_APPEND(skb, attrlen, data) \
-({	if (unlikely(skb_tailroom(skb) < (int)(attrlen))) \
-		goto rtattr_failure; \
-	memcpy(skb_put(skb, attrlen), data, attrlen); })
-
-#define RTA_PUT_NOHDR(skb, attrlen, data) \
-({	RTA_APPEND(skb, RTA_ALIGN(attrlen), data); \
-	memset(skb_tail_pointer(skb) - (RTA_ALIGN(attrlen) - attrlen), 0, \
-	       RTA_ALIGN(attrlen) - attrlen); })
-
-#define RTA_PUT_U8(skb, attrtype, value) \
-({	u8 _tmp = (value); \
-	RTA_PUT(skb, attrtype, sizeof(u8), &_tmp); })
-
-#define RTA_PUT_U16(skb, attrtype, value) \
-({	u16 _tmp = (value); \
-	RTA_PUT(skb, attrtype, sizeof(u16), &_tmp); })
-
-#define RTA_PUT_U32(skb, attrtype, value) \
-({	u32 _tmp = (value); \
-	RTA_PUT(skb, attrtype, sizeof(u32), &_tmp); })
-
-#define RTA_PUT_U64(skb, attrtype, value) \
-({	u64 _tmp = (value); \
-	RTA_PUT(skb, attrtype, sizeof(u64), &_tmp); })
-
-#define RTA_PUT_SECS(skb, attrtype, value) \
-	RTA_PUT_U64(skb, attrtype, (value) / HZ)
-
-#define RTA_PUT_MSECS(skb, attrtype, value) \
-	RTA_PUT_U64(skb, attrtype, jiffies_to_msecs(value))
-
-#define RTA_PUT_STRING(skb, attrtype, value) \
-	RTA_PUT(skb, attrtype, strlen(value) + 1, value)
-
-#define RTA_PUT_FLAG(skb, attrtype) \
-	RTA_PUT(skb, attrtype, 0, NULL);
-
-#define RTA_NEST(skb, type) \
-({	struct rtattr *__start = (struct rtattr *)skb_tail_pointer(skb); \
-	RTA_PUT(skb, type, 0, NULL); \
-	__start;  })
-
-#define RTA_NEST_END(skb, start) \
-({	(start)->rta_len = skb_tail_pointer(skb) - (unsigned char *)(start); \
-	(skb)->len; })
-
-#define RTA_NEST_COMPAT(skb, type, attrlen, data) \
-({	struct rtattr *__start = (struct rtattr *)skb_tail_pointer(skb); \
-	RTA_PUT(skb, type, attrlen, data); \
-	RTA_NEST(skb, type); \
-	__start; })
-
-#define RTA_NEST_COMPAT_END(skb, start) \
-({	struct rtattr *__nest = (void *)(start) + NLMSG_ALIGN((start)->rta_len); \
-	(start)->rta_len = skb_tail_pointer(skb) - (unsigned char *)(start); \
-	RTA_NEST_END(skb, __nest); \
-	(skb)->len; })
-
-#define RTA_NEST_CANCEL(skb, start) \
-({	if (start) \
-		skb_trim(skb, (unsigned char *) (start) - (skb)->data); \
-	-1; })
-
-#define RTA_GET_U8(rta) \
-({	if (!rta || RTA_PAYLOAD(rta) < sizeof(u8)) \
-		goto rtattr_failure; \
-	*(u8 *) RTA_DATA(rta); })
-
-#define RTA_GET_U16(rta) \
-({	if (!rta || RTA_PAYLOAD(rta) < sizeof(u16)) \
-		goto rtattr_failure; \
-	*(u16 *) RTA_DATA(rta); })
-
-#define RTA_GET_U32(rta) \
-({	if (!rta || RTA_PAYLOAD(rta) < sizeof(u32)) \
-		goto rtattr_failure; \
-	*(u32 *) RTA_DATA(rta); })
-
-#define RTA_GET_U64(rta) \
-({	u64 _tmp; \
-	if (!rta || RTA_PAYLOAD(rta) < sizeof(u64)) \
-		goto rtattr_failure; \
-	memcpy(&_tmp, RTA_DATA(rta), sizeof(_tmp)); \
-	_tmp; })
-
-#define RTA_GET_FLAG(rta) (!!(rta))
-
-#define RTA_GET_SECS(rta) ((unsigned long) RTA_GET_U64(rta) * HZ)
-#define RTA_GET_MSECS(rta) (msecs_to_jiffies((unsigned long) RTA_GET_U64(rta)))
-		
-static inline struct rtattr *
-__rta_reserve(struct sk_buff *skb, int attrtype, int attrlen)
-{
-	struct rtattr *rta;
-	int size = RTA_LENGTH(attrlen);
-
-	rta = (struct rtattr*)skb_put(skb, RTA_ALIGN(size));
-	rta->rta_type = attrtype;
-	rta->rta_len = size;
-	memset(RTA_DATA(rta) + attrlen, 0, RTA_ALIGN(size) - size);
-	return rta;
-}
-
-#define __RTA_PUT(skb, attrtype, attrlen) \
-({ 	if (unlikely(skb_tailroom(skb) < (int)RTA_SPACE(attrlen))) \
-		goto rtattr_failure; \
-   	__rta_reserve(skb, attrtype, attrlen); })
-
-extern void rtmsg_ifinfo(int type, struct net_device *dev, unsigned change);
-
-/* RTNL is used as a global lock for all changes to network configuration  */
-extern void rtnl_lock(void);
-extern void rtnl_unlock(void);
-extern int rtnl_trylock(void);
-extern int rtnl_is_locked(void);
-#ifdef CONFIG_PROVE_LOCKING
-extern int lockdep_rtnl_is_held(void);
-#endif /* #ifdef CONFIG_PROVE_LOCKING */
-
-/**
- * rcu_dereference_rtnl - rcu_dereference with debug checking
- * @p: The pointer to read, prior to dereferencing
- *
- * Do an rcu_dereference(p), but check caller either holds rcu_read_lock()
- * or RTNL. Note : Please prefer rtnl_dereference() or rcu_dereference()
- */
-#define rcu_dereference_rtnl(p)					\
-	rcu_dereference_check(p, lockdep_rtnl_is_held())
-
-/**
- * rtnl_dereference - fetch RCU pointer when updates are prevented by RTNL
- * @p: The pointer to read, prior to dereferencing
- *
- * Return the value of the specified RCU-protected pointer, but omit
- * both the smp_read_barrier_depends() and the ACCESS_ONCE(), because
- * caller holds RTNL.
- */
-#define rtnl_dereference(p)					\
-	rcu_dereference_protected(p, lockdep_rtnl_is_held())
-
-static inline struct netdev_queue *dev_ingress_queue(struct net_device *dev)
-{
-	return rtnl_dereference(dev->ingress_queue);
-}
-
-extern struct netdev_queue *dev_ingress_queue_create(struct net_device *dev);
-
-extern void rtnetlink_init(void);
-extern void __rtnl_unlock(void);
-
-#define ASSERT_RTNL() do { \
-	if (unlikely(!rtnl_is_locked())) { \
-		printk(KERN_ERR "RTNL: assertion failed at %s (%d)\n", \
-		       __FILE__,  __LINE__); \
-		dump_stack(); \
-	} \
-} while(0)
-
-static inline u32 rtm_get_table(struct rtattr **rta, u8 table)
-{
-	return RTA_GET_U32(rta[RTA_TABLE-1]);
-rtattr_failure:
-	return table;
-}
-
-#endif /* __KERNEL__ */
-
-
-#endif	/* __LINUX_RTNETLINK_H */
diff --git a/ANDROID_3.4.5/include/linux/rwlock.h b/ANDROID_3.4.5/include/linux/rwlock.h
deleted file mode 100644
index bc2994ed..00000000
--- a/ANDROID_3.4.5/include/linux/rwlock.h
+++ /dev/null
@@ -1,125 +0,0 @@
-#ifndef __LINUX_RWLOCK_H
-#define __LINUX_RWLOCK_H
-
-#ifndef __LINUX_SPINLOCK_H
-# error "please don't include this file directly"
-#endif
-
-/*
- * rwlock related methods
- *
- * split out from spinlock.h
- *
- * portions Copyright 2005, Red Hat, Inc., Ingo Molnar
- * Released under the General Public License (GPL).
- */
-
-#ifdef CONFIG_DEBUG_SPINLOCK
-  extern void __rwlock_init(rwlock_t *lock, const char *name,
-			    struct lock_class_key *key);
-# define rwlock_init(lock)					\
-do {								\
-	static struct lock_class_key __key;			\
-								\
-	__rwlock_init((lock), #lock, &__key);			\
-} while (0)
-#else
-# define rwlock_init(lock)					\
-	do { *(lock) = __RW_LOCK_UNLOCKED(lock); } while (0)
-#endif
-
-#ifdef CONFIG_DEBUG_SPINLOCK
- extern void do_raw_read_lock(rwlock_t *lock) __acquires(lock);
-#define do_raw_read_lock_flags(lock, flags) do_raw_read_lock(lock)
- extern int do_raw_read_trylock(rwlock_t *lock);
- extern void do_raw_read_unlock(rwlock_t *lock) __releases(lock);
- extern void do_raw_write_lock(rwlock_t *lock) __acquires(lock);
-#define do_raw_write_lock_flags(lock, flags) do_raw_write_lock(lock)
- extern int do_raw_write_trylock(rwlock_t *lock);
- extern void do_raw_write_unlock(rwlock_t *lock) __releases(lock);
-#else
-# define do_raw_read_lock(rwlock)	do {__acquire(lock); arch_read_lock(&(rwlock)->raw_lock); } while (0)
-# define do_raw_read_lock_flags(lock, flags) \
-		do {__acquire(lock); arch_read_lock_flags(&(lock)->raw_lock, *(flags)); } while (0)
-# define do_raw_read_trylock(rwlock)	arch_read_trylock(&(rwlock)->raw_lock)
-# define do_raw_read_unlock(rwlock)	do {arch_read_unlock(&(rwlock)->raw_lock); __release(lock); } while (0)
-# define do_raw_write_lock(rwlock)	do {__acquire(lock); arch_write_lock(&(rwlock)->raw_lock); } while (0)
-# define do_raw_write_lock_flags(lock, flags) \
-		do {__acquire(lock); arch_write_lock_flags(&(lock)->raw_lock, *(flags)); } while (0)
-# define do_raw_write_trylock(rwlock)	arch_write_trylock(&(rwlock)->raw_lock)
-# define do_raw_write_unlock(rwlock)	do {arch_write_unlock(&(rwlock)->raw_lock); __release(lock); } while (0)
-#endif
-
-#define read_can_lock(rwlock)		arch_read_can_lock(&(rwlock)->raw_lock)
-#define write_can_lock(rwlock)		arch_write_can_lock(&(rwlock)->raw_lock)
-
-/*
- * Define the various rw_lock methods.  Note we define these
- * regardless of whether CONFIG_SMP or CONFIG_PREEMPT are set. The various
- * methods are defined as nops in the case they are not required.
- */
-#define read_trylock(lock)	__cond_lock(lock, _raw_read_trylock(lock))
-#define write_trylock(lock)	__cond_lock(lock, _raw_write_trylock(lock))
-
-#define write_lock(lock)	_raw_write_lock(lock)
-#define read_lock(lock)		_raw_read_lock(lock)
-
-#if defined(CONFIG_SMP) || defined(CONFIG_DEBUG_SPINLOCK)
-
-#define read_lock_irqsave(lock, flags)			\
-	do {						\
-		typecheck(unsigned long, flags);	\
-		flags = _raw_read_lock_irqsave(lock);	\
-	} while (0)
-#define write_lock_irqsave(lock, flags)			\
-	do {						\
-		typecheck(unsigned long, flags);	\
-		flags = _raw_write_lock_irqsave(lock);	\
-	} while (0)
-
-#else
-
-#define read_lock_irqsave(lock, flags)			\
-	do {						\
-		typecheck(unsigned long, flags);	\
-		_raw_read_lock_irqsave(lock, flags);	\
-	} while (0)
-#define write_lock_irqsave(lock, flags)			\
-	do {						\
-		typecheck(unsigned long, flags);	\
-		_raw_write_lock_irqsave(lock, flags);	\
-	} while (0)
-
-#endif
-
-#define read_lock_irq(lock)		_raw_read_lock_irq(lock)
-#define read_lock_bh(lock)		_raw_read_lock_bh(lock)
-#define write_lock_irq(lock)		_raw_write_lock_irq(lock)
-#define write_lock_bh(lock)		_raw_write_lock_bh(lock)
-#define read_unlock(lock)		_raw_read_unlock(lock)
-#define write_unlock(lock)		_raw_write_unlock(lock)
-#define read_unlock_irq(lock)		_raw_read_unlock_irq(lock)
-#define write_unlock_irq(lock)		_raw_write_unlock_irq(lock)
-
-#define read_unlock_irqrestore(lock, flags)			\
-	do {							\
-		typecheck(unsigned long, flags);		\
-		_raw_read_unlock_irqrestore(lock, flags);	\
-	} while (0)
-#define read_unlock_bh(lock)		_raw_read_unlock_bh(lock)
-
-#define write_unlock_irqrestore(lock, flags)		\
-	do {						\
-		typecheck(unsigned long, flags);	\
-		_raw_write_unlock_irqrestore(lock, flags);	\
-	} while (0)
-#define write_unlock_bh(lock)		_raw_write_unlock_bh(lock)
-
-#define write_trylock_irqsave(lock, flags) \
-({ \
-	local_irq_save(flags); \
-	write_trylock(lock) ? \
-	1 : ({ local_irq_restore(flags); 0; }); \
-})
-
-#endif /* __LINUX_RWLOCK_H */
diff --git a/ANDROID_3.4.5/include/linux/rwlock_api_smp.h b/ANDROID_3.4.5/include/linux/rwlock_api_smp.h
deleted file mode 100644
index 9c9f0495..00000000
--- a/ANDROID_3.4.5/include/linux/rwlock_api_smp.h
+++ /dev/null
@@ -1,282 +0,0 @@
-#ifndef __LINUX_RWLOCK_API_SMP_H
-#define __LINUX_RWLOCK_API_SMP_H
-
-#ifndef __LINUX_SPINLOCK_API_SMP_H
-# error "please don't include this file directly"
-#endif
-
-/*
- * include/linux/rwlock_api_smp.h
- *
- * spinlock API declarations on SMP (and debug)
- * (implemented in kernel/spinlock.c)
- *
- * portions Copyright 2005, Red Hat, Inc., Ingo Molnar
- * Released under the General Public License (GPL).
- */
-
-void __lockfunc _raw_read_lock(rwlock_t *lock)		__acquires(lock);
-void __lockfunc _raw_write_lock(rwlock_t *lock)		__acquires(lock);
-void __lockfunc _raw_read_lock_bh(rwlock_t *lock)	__acquires(lock);
-void __lockfunc _raw_write_lock_bh(rwlock_t *lock)	__acquires(lock);
-void __lockfunc _raw_read_lock_irq(rwlock_t *lock)	__acquires(lock);
-void __lockfunc _raw_write_lock_irq(rwlock_t *lock)	__acquires(lock);
-unsigned long __lockfunc _raw_read_lock_irqsave(rwlock_t *lock)
-							__acquires(lock);
-unsigned long __lockfunc _raw_write_lock_irqsave(rwlock_t *lock)
-							__acquires(lock);
-int __lockfunc _raw_read_trylock(rwlock_t *lock);
-int __lockfunc _raw_write_trylock(rwlock_t *lock);
-void __lockfunc _raw_read_unlock(rwlock_t *lock)	__releases(lock);
-void __lockfunc _raw_write_unlock(rwlock_t *lock)	__releases(lock);
-void __lockfunc _raw_read_unlock_bh(rwlock_t *lock)	__releases(lock);
-void __lockfunc _raw_write_unlock_bh(rwlock_t *lock)	__releases(lock);
-void __lockfunc _raw_read_unlock_irq(rwlock_t *lock)	__releases(lock);
-void __lockfunc _raw_write_unlock_irq(rwlock_t *lock)	__releases(lock);
-void __lockfunc
-_raw_read_unlock_irqrestore(rwlock_t *lock, unsigned long flags)
-							__releases(lock);
-void __lockfunc
-_raw_write_unlock_irqrestore(rwlock_t *lock, unsigned long flags)
-							__releases(lock);
-
-#ifdef CONFIG_INLINE_READ_LOCK
-#define _raw_read_lock(lock) __raw_read_lock(lock)
-#endif
-
-#ifdef CONFIG_INLINE_WRITE_LOCK
-#define _raw_write_lock(lock) __raw_write_lock(lock)
-#endif
-
-#ifdef CONFIG_INLINE_READ_LOCK_BH
-#define _raw_read_lock_bh(lock) __raw_read_lock_bh(lock)
-#endif
-
-#ifdef CONFIG_INLINE_WRITE_LOCK_BH
-#define _raw_write_lock_bh(lock) __raw_write_lock_bh(lock)
-#endif
-
-#ifdef CONFIG_INLINE_READ_LOCK_IRQ
-#define _raw_read_lock_irq(lock) __raw_read_lock_irq(lock)
-#endif
-
-#ifdef CONFIG_INLINE_WRITE_LOCK_IRQ
-#define _raw_write_lock_irq(lock) __raw_write_lock_irq(lock)
-#endif
-
-#ifdef CONFIG_INLINE_READ_LOCK_IRQSAVE
-#define _raw_read_lock_irqsave(lock) __raw_read_lock_irqsave(lock)
-#endif
-
-#ifdef CONFIG_INLINE_WRITE_LOCK_IRQSAVE
-#define _raw_write_lock_irqsave(lock) __raw_write_lock_irqsave(lock)
-#endif
-
-#ifdef CONFIG_INLINE_READ_TRYLOCK
-#define _raw_read_trylock(lock) __raw_read_trylock(lock)
-#endif
-
-#ifdef CONFIG_INLINE_WRITE_TRYLOCK
-#define _raw_write_trylock(lock) __raw_write_trylock(lock)
-#endif
-
-#ifdef CONFIG_INLINE_READ_UNLOCK
-#define _raw_read_unlock(lock) __raw_read_unlock(lock)
-#endif
-
-#ifdef CONFIG_INLINE_WRITE_UNLOCK
-#define _raw_write_unlock(lock) __raw_write_unlock(lock)
-#endif
-
-#ifdef CONFIG_INLINE_READ_UNLOCK_BH
-#define _raw_read_unlock_bh(lock) __raw_read_unlock_bh(lock)
-#endif
-
-#ifdef CONFIG_INLINE_WRITE_UNLOCK_BH
-#define _raw_write_unlock_bh(lock) __raw_write_unlock_bh(lock)
-#endif
-
-#ifdef CONFIG_INLINE_READ_UNLOCK_IRQ
-#define _raw_read_unlock_irq(lock) __raw_read_unlock_irq(lock)
-#endif
-
-#ifdef CONFIG_INLINE_WRITE_UNLOCK_IRQ
-#define _raw_write_unlock_irq(lock) __raw_write_unlock_irq(lock)
-#endif
-
-#ifdef CONFIG_INLINE_READ_UNLOCK_IRQRESTORE
-#define _raw_read_unlock_irqrestore(lock, flags) \
-	__raw_read_unlock_irqrestore(lock, flags)
-#endif
-
-#ifdef CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE
-#define _raw_write_unlock_irqrestore(lock, flags) \
-	__raw_write_unlock_irqrestore(lock, flags)
-#endif
-
-static inline int __raw_read_trylock(rwlock_t *lock)
-{
-	preempt_disable();
-	if (do_raw_read_trylock(lock)) {
-		rwlock_acquire_read(&lock->dep_map, 0, 1, _RET_IP_);
-		return 1;
-	}
-	preempt_enable();
-	return 0;
-}
-
-static inline int __raw_write_trylock(rwlock_t *lock)
-{
-	preempt_disable();
-	if (do_raw_write_trylock(lock)) {
-		rwlock_acquire(&lock->dep_map, 0, 1, _RET_IP_);
-		return 1;
-	}
-	preempt_enable();
-	return 0;
-}
-
-/*
- * If lockdep is enabled then we use the non-preemption spin-ops
- * even on CONFIG_PREEMPT, because lockdep assumes that interrupts are
- * not re-enabled during lock-acquire (which the preempt-spin-ops do):
- */
-#if !defined(CONFIG_GENERIC_LOCKBREAK) || defined(CONFIG_DEBUG_LOCK_ALLOC)
-
-static inline void __raw_read_lock(rwlock_t *lock)
-{
-	preempt_disable();
-	rwlock_acquire_read(&lock->dep_map, 0, 0, _RET_IP_);
-	LOCK_CONTENDED(lock, do_raw_read_trylock, do_raw_read_lock);
-}
-
-static inline unsigned long __raw_read_lock_irqsave(rwlock_t *lock)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-	preempt_disable();
-	rwlock_acquire_read(&lock->dep_map, 0, 0, _RET_IP_);
-	LOCK_CONTENDED_FLAGS(lock, do_raw_read_trylock, do_raw_read_lock,
-			     do_raw_read_lock_flags, &flags);
-	return flags;
-}
-
-static inline void __raw_read_lock_irq(rwlock_t *lock)
-{
-	local_irq_disable();
-	preempt_disable();
-	rwlock_acquire_read(&lock->dep_map, 0, 0, _RET_IP_);
-	LOCK_CONTENDED(lock, do_raw_read_trylock, do_raw_read_lock);
-}
-
-static inline void __raw_read_lock_bh(rwlock_t *lock)
-{
-	local_bh_disable();
-	preempt_disable();
-	rwlock_acquire_read(&lock->dep_map, 0, 0, _RET_IP_);
-	LOCK_CONTENDED(lock, do_raw_read_trylock, do_raw_read_lock);
-}
-
-static inline unsigned long __raw_write_lock_irqsave(rwlock_t *lock)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-	preempt_disable();
-	rwlock_acquire(&lock->dep_map, 0, 0, _RET_IP_);
-	LOCK_CONTENDED_FLAGS(lock, do_raw_write_trylock, do_raw_write_lock,
-			     do_raw_write_lock_flags, &flags);
-	return flags;
-}
-
-static inline void __raw_write_lock_irq(rwlock_t *lock)
-{
-	local_irq_disable();
-	preempt_disable();
-	rwlock_acquire(&lock->dep_map, 0, 0, _RET_IP_);
-	LOCK_CONTENDED(lock, do_raw_write_trylock, do_raw_write_lock);
-}
-
-static inline void __raw_write_lock_bh(rwlock_t *lock)
-{
-	local_bh_disable();
-	preempt_disable();
-	rwlock_acquire(&lock->dep_map, 0, 0, _RET_IP_);
-	LOCK_CONTENDED(lock, do_raw_write_trylock, do_raw_write_lock);
-}
-
-static inline void __raw_write_lock(rwlock_t *lock)
-{
-	preempt_disable();
-	rwlock_acquire(&lock->dep_map, 0, 0, _RET_IP_);
-	LOCK_CONTENDED(lock, do_raw_write_trylock, do_raw_write_lock);
-}
-
-#endif /* CONFIG_PREEMPT */
-
-static inline void __raw_write_unlock(rwlock_t *lock)
-{
-	rwlock_release(&lock->dep_map, 1, _RET_IP_);
-	do_raw_write_unlock(lock);
-	preempt_enable();
-}
-
-static inline void __raw_read_unlock(rwlock_t *lock)
-{
-	rwlock_release(&lock->dep_map, 1, _RET_IP_);
-	do_raw_read_unlock(lock);
-	preempt_enable();
-}
-
-static inline void
-__raw_read_unlock_irqrestore(rwlock_t *lock, unsigned long flags)
-{
-	rwlock_release(&lock->dep_map, 1, _RET_IP_);
-	do_raw_read_unlock(lock);
-	local_irq_restore(flags);
-	preempt_enable();
-}
-
-static inline void __raw_read_unlock_irq(rwlock_t *lock)
-{
-	rwlock_release(&lock->dep_map, 1, _RET_IP_);
-	do_raw_read_unlock(lock);
-	local_irq_enable();
-	preempt_enable();
-}
-
-static inline void __raw_read_unlock_bh(rwlock_t *lock)
-{
-	rwlock_release(&lock->dep_map, 1, _RET_IP_);
-	do_raw_read_unlock(lock);
-	preempt_enable_no_resched();
-	local_bh_enable_ip((unsigned long)__builtin_return_address(0));
-}
-
-static inline void __raw_write_unlock_irqrestore(rwlock_t *lock,
-					     unsigned long flags)
-{
-	rwlock_release(&lock->dep_map, 1, _RET_IP_);
-	do_raw_write_unlock(lock);
-	local_irq_restore(flags);
-	preempt_enable();
-}
-
-static inline void __raw_write_unlock_irq(rwlock_t *lock)
-{
-	rwlock_release(&lock->dep_map, 1, _RET_IP_);
-	do_raw_write_unlock(lock);
-	local_irq_enable();
-	preempt_enable();
-}
-
-static inline void __raw_write_unlock_bh(rwlock_t *lock)
-{
-	rwlock_release(&lock->dep_map, 1, _RET_IP_);
-	do_raw_write_unlock(lock);
-	preempt_enable_no_resched();
-	local_bh_enable_ip((unsigned long)__builtin_return_address(0));
-}
-
-#endif /* __LINUX_RWLOCK_API_SMP_H */
diff --git a/ANDROID_3.4.5/include/linux/rwlock_types.h b/ANDROID_3.4.5/include/linux/rwlock_types.h
deleted file mode 100644
index cc0072e9..00000000
--- a/ANDROID_3.4.5/include/linux/rwlock_types.h
+++ /dev/null
@@ -1,48 +0,0 @@
-#ifndef __LINUX_RWLOCK_TYPES_H
-#define __LINUX_RWLOCK_TYPES_H
-
-/*
- * include/linux/rwlock_types.h - generic rwlock type definitions
- *				  and initializers
- *
- * portions Copyright 2005, Red Hat, Inc., Ingo Molnar
- * Released under the General Public License (GPL).
- */
-typedef struct {
-	arch_rwlock_t raw_lock;
-#ifdef CONFIG_GENERIC_LOCKBREAK
-	unsigned int break_lock;
-#endif
-#ifdef CONFIG_DEBUG_SPINLOCK
-	unsigned int magic, owner_cpu;
-	void *owner;
-#endif
-#ifdef CONFIG_DEBUG_LOCK_ALLOC
-	struct lockdep_map dep_map;
-#endif
-} rwlock_t;
-
-#define RWLOCK_MAGIC		0xdeaf1eed
-
-#ifdef CONFIG_DEBUG_LOCK_ALLOC
-# define RW_DEP_MAP_INIT(lockname)	.dep_map = { .name = #lockname }
-#else
-# define RW_DEP_MAP_INIT(lockname)
-#endif
-
-#ifdef CONFIG_DEBUG_SPINLOCK
-#define __RW_LOCK_UNLOCKED(lockname)					\
-	(rwlock_t)	{	.raw_lock = __ARCH_RW_LOCK_UNLOCKED,	\
-				.magic = RWLOCK_MAGIC,			\
-				.owner = SPINLOCK_OWNER_INIT,		\
-				.owner_cpu = -1,			\
-				RW_DEP_MAP_INIT(lockname) }
-#else
-#define __RW_LOCK_UNLOCKED(lockname) \
-	(rwlock_t)	{	.raw_lock = __ARCH_RW_LOCK_UNLOCKED,	\
-				RW_DEP_MAP_INIT(lockname) }
-#endif
-
-#define DEFINE_RWLOCK(x)	rwlock_t x = __RW_LOCK_UNLOCKED(x)
-
-#endif /* __LINUX_RWLOCK_TYPES_H */
diff --git a/ANDROID_3.4.5/include/linux/rwsem-spinlock.h b/ANDROID_3.4.5/include/linux/rwsem-spinlock.h
deleted file mode 100644
index d5b13bc0..00000000
--- a/ANDROID_3.4.5/include/linux/rwsem-spinlock.h
+++ /dev/null
@@ -1,45 +0,0 @@
-/* rwsem-spinlock.h: fallback C implementation
- *
- * Copyright (c) 2001   David Howells (dhowells@redhat.com).
- * - Derived partially from ideas by Andrea Arcangeli <andrea@suse.de>
- * - Derived also from comments by Linus
- */
-
-#ifndef _LINUX_RWSEM_SPINLOCK_H
-#define _LINUX_RWSEM_SPINLOCK_H
-
-#ifndef _LINUX_RWSEM_H
-#error "please don't include linux/rwsem-spinlock.h directly, use linux/rwsem.h instead"
-#endif
-
-#ifdef __KERNEL__
-/*
- * the rw-semaphore definition
- * - if activity is 0 then there are no active readers or writers
- * - if activity is +ve then that is the number of active readers
- * - if activity is -1 then there is one active writer
- * - if wait_list is not empty, then there are processes waiting for the semaphore
- */
-struct rw_semaphore {
-	__s32			activity;
-	raw_spinlock_t		wait_lock;
-	struct list_head	wait_list;
-#ifdef CONFIG_DEBUG_LOCK_ALLOC
-	struct lockdep_map dep_map;
-#endif
-};
-
-#define RWSEM_UNLOCKED_VALUE		0x00000000
-
-extern void __down_read(struct rw_semaphore *sem);
-extern int __down_read_trylock(struct rw_semaphore *sem);
-extern void __down_write(struct rw_semaphore *sem);
-extern void __down_write_nested(struct rw_semaphore *sem, int subclass);
-extern int __down_write_trylock(struct rw_semaphore *sem);
-extern void __up_read(struct rw_semaphore *sem);
-extern void __up_write(struct rw_semaphore *sem);
-extern void __downgrade_write(struct rw_semaphore *sem);
-extern int rwsem_is_locked(struct rw_semaphore *sem);
-
-#endif /* __KERNEL__ */
-#endif /* _LINUX_RWSEM_SPINLOCK_H */
diff --git a/ANDROID_3.4.5/include/linux/rwsem.h b/ANDROID_3.4.5/include/linux/rwsem.h
deleted file mode 100644
index 54bd7cd7..00000000
--- a/ANDROID_3.4.5/include/linux/rwsem.h
+++ /dev/null
@@ -1,133 +0,0 @@
-/* rwsem.h: R/W semaphores, public interface
- *
- * Written by David Howells (dhowells@redhat.com).
- * Derived from asm-i386/semaphore.h
- */
-
-#ifndef _LINUX_RWSEM_H
-#define _LINUX_RWSEM_H
-
-#include <linux/linkage.h>
-
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/spinlock.h>
-
-#include <linux/atomic.h>
-
-struct rw_semaphore;
-
-#ifdef CONFIG_RWSEM_GENERIC_SPINLOCK
-#include <linux/rwsem-spinlock.h> /* use a generic implementation */
-#else
-/* All arch specific implementations share the same struct */
-struct rw_semaphore {
-	long			count;
-	raw_spinlock_t		wait_lock;
-	struct list_head	wait_list;
-#ifdef CONFIG_DEBUG_LOCK_ALLOC
-	struct lockdep_map	dep_map;
-#endif
-};
-
-extern struct rw_semaphore *rwsem_down_read_failed(struct rw_semaphore *sem);
-extern struct rw_semaphore *rwsem_down_write_failed(struct rw_semaphore *sem);
-extern struct rw_semaphore *rwsem_wake(struct rw_semaphore *);
-extern struct rw_semaphore *rwsem_downgrade_wake(struct rw_semaphore *sem);
-
-/* Include the arch specific part */
-#include <asm/rwsem.h>
-
-/* In all implementations count != 0 means locked */
-static inline int rwsem_is_locked(struct rw_semaphore *sem)
-{
-	return sem->count != 0;
-}
-
-#endif
-
-/* Common initializer macros and functions */
-
-#ifdef CONFIG_DEBUG_LOCK_ALLOC
-# define __RWSEM_DEP_MAP_INIT(lockname) , .dep_map = { .name = #lockname }
-#else
-# define __RWSEM_DEP_MAP_INIT(lockname)
-#endif
-
-#define __RWSEM_INITIALIZER(name)			\
-	{ RWSEM_UNLOCKED_VALUE,				\
-	  __RAW_SPIN_LOCK_UNLOCKED(name.wait_lock),	\
-	  LIST_HEAD_INIT((name).wait_list)		\
-	  __RWSEM_DEP_MAP_INIT(name) }
-
-#define DECLARE_RWSEM(name) \
-	struct rw_semaphore name = __RWSEM_INITIALIZER(name)
-
-extern void __init_rwsem(struct rw_semaphore *sem, const char *name,
-			 struct lock_class_key *key);
-
-#define init_rwsem(sem)						\
-do {								\
-	static struct lock_class_key __key;			\
-								\
-	__init_rwsem((sem), #sem, &__key);			\
-} while (0)
-
-/*
- * lock for reading
- */
-extern void down_read(struct rw_semaphore *sem);
-
-/*
- * trylock for reading -- returns 1 if successful, 0 if contention
- */
-extern int down_read_trylock(struct rw_semaphore *sem);
-
-/*
- * lock for writing
- */
-extern void down_write(struct rw_semaphore *sem);
-
-/*
- * trylock for writing -- returns 1 if successful, 0 if contention
- */
-extern int down_write_trylock(struct rw_semaphore *sem);
-
-/*
- * release a read lock
- */
-extern void up_read(struct rw_semaphore *sem);
-
-/*
- * release a write lock
- */
-extern void up_write(struct rw_semaphore *sem);
-
-/*
- * downgrade write lock to read lock
- */
-extern void downgrade_write(struct rw_semaphore *sem);
-
-#ifdef CONFIG_DEBUG_LOCK_ALLOC
-/*
- * nested locking. NOTE: rwsems are not allowed to recurse
- * (which occurs if the same task tries to acquire the same
- * lock instance multiple times), but multiple locks of the
- * same lock class might be taken, if the order of the locks
- * is always the same. This ordering rule can be expressed
- * to lockdep via the _nested() APIs, but enumerating the
- * subclasses that are used. (If the nesting relationship is
- * static then another method for expressing nested locking is
- * the explicit definition of lock class keys and the use of
- * lockdep_set_class() at lock initialization time.
- * See Documentation/lockdep-design.txt for more details.)
- */
-extern void down_read_nested(struct rw_semaphore *sem, int subclass);
-extern void down_write_nested(struct rw_semaphore *sem, int subclass);
-#else
-# define down_read_nested(sem, subclass)		down_read(sem)
-# define down_write_nested(sem, subclass)	down_write(sem)
-#endif
-
-#endif /* _LINUX_RWSEM_H */
diff --git a/ANDROID_3.4.5/include/linux/rxrpc.h b/ANDROID_3.4.5/include/linux/rxrpc.h
deleted file mode 100644
index a53915cd..00000000
--- a/ANDROID_3.4.5/include/linux/rxrpc.h
+++ /dev/null
@@ -1,69 +0,0 @@
-/* AF_RXRPC parameters
- *
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#ifndef _LINUX_RXRPC_H
-#define _LINUX_RXRPC_H
-
-#include <linux/in.h>
-#include <linux/in6.h>
-
-/*
- * RxRPC socket address
- */
-struct sockaddr_rxrpc {
-	sa_family_t	srx_family;	/* address family */
-	u16		srx_service;	/* service desired */
-	u16		transport_type;	/* type of transport socket (SOCK_DGRAM) */
-	u16		transport_len;	/* length of transport address */
-	union {
-		sa_family_t family;		/* transport address family */
-		struct sockaddr_in sin;		/* IPv4 transport address */
-		struct sockaddr_in6 sin6;	/* IPv6 transport address */
-	} transport;
-};
-
-/*
- * RxRPC socket options
- */
-#define RXRPC_SECURITY_KEY		1	/* [clnt] set client security key */
-#define RXRPC_SECURITY_KEYRING		2	/* [srvr] set ring of server security keys */
-#define RXRPC_EXCLUSIVE_CONNECTION	3	/* [clnt] use exclusive RxRPC connection */
-#define RXRPC_MIN_SECURITY_LEVEL	4	/* minimum security level */
-
-/*
- * RxRPC control messages
- * - terminal messages mean that a user call ID tag can be recycled
- */
-#define RXRPC_USER_CALL_ID	1	/* user call ID specifier */
-#define RXRPC_ABORT		2	/* abort request / notification [terminal] */
-#define RXRPC_ACK		3	/* [Server] RPC op final ACK received [terminal] */
-#define RXRPC_NET_ERROR		5	/* network error received [terminal] */
-#define RXRPC_BUSY		6	/* server busy received [terminal] */
-#define RXRPC_LOCAL_ERROR	7	/* local error generated [terminal] */
-#define RXRPC_NEW_CALL		8	/* [Server] new incoming call notification */
-#define RXRPC_ACCEPT		9	/* [Server] accept request */
-
-/*
- * RxRPC security levels
- */
-#define RXRPC_SECURITY_PLAIN	0	/* plain secure-checksummed packets only */
-#define RXRPC_SECURITY_AUTH	1	/* authenticated packets */
-#define RXRPC_SECURITY_ENCRYPT	2	/* encrypted packets */
-
-/*
- * RxRPC security indices
- */
-#define RXRPC_SECURITY_NONE	0	/* no security protocol */
-#define RXRPC_SECURITY_RXKAD	2	/* kaserver or kerberos 4 */
-#define RXRPC_SECURITY_RXGK	4	/* gssapi-based */
-#define RXRPC_SECURITY_RXK5	5	/* kerberos 5 */
-
-#endif /* _LINUX_RXRPC_H */
diff --git a/ANDROID_3.4.5/include/linux/s3c_adc_battery.h b/ANDROID_3.4.5/include/linux/s3c_adc_battery.h
deleted file mode 100644
index 99dadbff..00000000
--- a/ANDROID_3.4.5/include/linux/s3c_adc_battery.h
+++ /dev/null
@@ -1,41 +0,0 @@
-#ifndef _S3C_ADC_BATTERY_H
-#define _S3C_ADC_BATTERY_H
-
-struct s3c_adc_bat_thresh {
-	int volt; /* mV */
-	int cur; /* mA */
-	int level; /* percent */
-};
-
-struct s3c_adc_bat_pdata {
-	int (*init)(void);
-	void (*exit)(void);
-	void (*enable_charger)(void);
-	void (*disable_charger)(void);
-
-	int gpio_charge_finished;
-	int gpio_inverted;
-
-	const struct s3c_adc_bat_thresh *lut_noac;
-	unsigned int lut_noac_cnt;
-	const struct s3c_adc_bat_thresh *lut_acin;
-	unsigned int lut_acin_cnt;
-
-	const unsigned int volt_channel;
-	const unsigned int current_channel;
-	const unsigned int backup_volt_channel;
-
-	const unsigned int volt_samples;
-	const unsigned int current_samples;
-	const unsigned int backup_volt_samples;
-
-	const unsigned int volt_mult;
-	const unsigned int current_mult;
-	const unsigned int backup_volt_mult;
-	const unsigned int internal_impedance;
-
-	const unsigned int backup_volt_max;
-	const unsigned int backup_volt_min;
-};
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/sa11x0-dma.h b/ANDROID_3.4.5/include/linux/sa11x0-dma.h
deleted file mode 100644
index 65839a58..00000000
--- a/ANDROID_3.4.5/include/linux/sa11x0-dma.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * SA11x0 DMA Engine support
- *
- * Copyright (C) 2012 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __LINUX_SA11X0_DMA_H
-#define __LINUX_SA11X0_DMA_H
-
-struct dma_chan;
-
-#if defined(CONFIG_DMA_SA11X0) || defined(CONFIG_DMA_SA11X0_MODULE)
-bool sa11x0_dma_filter_fn(struct dma_chan *, void *);
-#else
-static inline bool sa11x0_dma_filter_fn(struct dma_chan *c, void *d)
-{
-	return false;
-}
-#endif
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/sc26198.h b/ANDROID_3.4.5/include/linux/sc26198.h
deleted file mode 100644
index 7ca35aba..00000000
--- a/ANDROID_3.4.5/include/linux/sc26198.h
+++ /dev/null
@@ -1,533 +0,0 @@
-/*****************************************************************************/
-
-/*
- *	sc26198.h  -- SC26198 UART hardware info.
- *
- *	Copyright (C) 1995-1998  Stallion Technologies
- *
- *	This program is free software; you can redistribute it and/or modify
- *	it under the terms of the GNU General Public License as published by
- *	the Free Software Foundation; either version 2 of the License, or
- *	(at your option) any later version.
- *
- *	This program is distributed in the hope that it will be useful,
- *	but WITHOUT ANY WARRANTY; without even the implied warranty of
- *	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *	GNU General Public License for more details.
- *
- *	You should have received a copy of the GNU General Public License
- *	along with this program; if not, write to the Free Software
- *	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-/*****************************************************************************/
-#ifndef	_SC26198_H
-#define	_SC26198_H
-/*****************************************************************************/
-
-/*
- *	Define the number of async ports per sc26198 uart device.
- */
-#define	SC26198_PORTS		8
-
-/*
- *	Baud rate timing clocks. All derived from a master 14.7456 MHz clock.
- */
-#define	SC26198_MASTERCLOCK	14745600L
-#define	SC26198_DCLK		(SC26198_MASTERCLOCK)
-#define	SC26198_CCLK		(SC26198_MASTERCLOCK / 2)
-#define	SC26198_BCLK		(SC26198_MASTERCLOCK / 4)
-
-/*
- *	Define internal FIFO sizes for the 26198 ports.
- */
-#define	SC26198_TXFIFOSIZE	16
-#define	SC26198_RXFIFOSIZE	16
-
-/*****************************************************************************/
-
-/*
- *	Global register definitions. These registers are global to each 26198
- *	device, not specific ports on it.
- */
-#define	TSTR		0x0d
-#define	GCCR		0x0f
-#define	ICR		0x1b
-#define	WDTRCR		0x1d
-#define	IVR		0x1f
-#define	BRGTRUA		0x84
-#define	GPOSR		0x87
-#define	GPOC		0x8b
-#define	UCIR		0x8c
-#define	CIR		0x8c
-#define	BRGTRUB		0x8d
-#define	GRXFIFO		0x8e
-#define	GTXFIFO		0x8e
-#define	GCCR2		0x8f
-#define	BRGTRLA		0x94
-#define	GPOR		0x97
-#define	GPOD		0x9b
-#define	BRGTCR		0x9c
-#define	GICR		0x9c
-#define	BRGTRLB		0x9d
-#define	GIBCR		0x9d
-#define	GITR		0x9f
-
-/*
- *	Per port channel registers. These are the register offsets within
- *	the port address space, so need to have the port address (0 to 7)
- *	inserted in bit positions 4:6.
- */
-#define	MR0		0x00
-#define	MR1		0x01
-#define	IOPCR		0x02
-#define	BCRBRK		0x03
-#define	BCRCOS		0x04
-#define	BCRX		0x06
-#define	BCRA		0x07
-#define	XONCR		0x08
-#define	XOFFCR		0x09
-#define	ARCR		0x0a
-#define	RXCSR		0x0c
-#define	TXCSR		0x0e
-#define	MR2		0x80
-#define	SR		0x81
-#define SCCR		0x81
-#define	ISR		0x82
-#define	IMR		0x82
-#define	TXFIFO		0x83
-#define	RXFIFO		0x83
-#define	IPR		0x84
-#define	IOPIOR		0x85
-#define	XISR		0x86
-
-/*
- *	For any given port calculate the address to use to access a specified
- *	register. This is only used for unusual access, mostly this is done
- *	through the assembler access routines.
- */
-#define	SC26198_PORTREG(port,reg)	((((port) & 0x07) << 4) | (reg))
-
-/*****************************************************************************/
-
-/*
- *	Global configuration control register bit definitions.
- */
-#define	GCCR_NOACK		0x00
-#define	GCCR_IVRACK		0x02
-#define	GCCR_IVRCHANACK		0x04
-#define	GCCR_IVRTYPCHANACK	0x06
-#define	GCCR_ASYNCCYCLE		0x00
-#define	GCCR_SYNCCYCLE		0x40
-
-/*****************************************************************************/
-
-/*
- *	Mode register 0 bit definitions.
- */
-#define	MR0_ADDRNONE		0x00
-#define	MR0_AUTOWAKE		0x01
-#define	MR0_AUTODOZE		0x02
-#define	MR0_AUTOWAKEDOZE	0x03
-#define	MR0_SWFNONE		0x00
-#define	MR0_SWFTX		0x04
-#define	MR0_SWFRX		0x08
-#define	MR0_SWFRXTX		0x0c
-#define	MR0_TXMASK		0x30
-#define	MR0_TXEMPTY		0x00
-#define	MR0_TXHIGH		0x10
-#define	MR0_TXHALF		0x20
-#define	MR0_TXRDY		0x00
-#define	MR0_ADDRNT		0x00
-#define	MR0_ADDRT		0x40
-#define	MR0_SWFNT		0x00
-#define	MR0_SWFT		0x80
-
-/*
- *	Mode register 1 bit definitions.
- */
-#define	MR1_CS5			0x00
-#define	MR1_CS6			0x01
-#define	MR1_CS7			0x02
-#define	MR1_CS8			0x03
-#define	MR1_PAREVEN		0x00
-#define	MR1_PARODD		0x04
-#define	MR1_PARENB		0x00
-#define	MR1_PARFORCE		0x08
-#define	MR1_PARNONE		0x10
-#define	MR1_PARSPECIAL		0x18
-#define	MR1_ERRCHAR		0x00
-#define	MR1_ERRBLOCK		0x20
-#define	MR1_ISRUNMASKED		0x00
-#define	MR1_ISRMASKED		0x40
-#define	MR1_AUTORTS		0x80
-
-/*
- *	Mode register 2 bit definitions.
- */
-#define	MR2_STOP1		0x00
-#define	MR2_STOP15		0x01
-#define	MR2_STOP2		0x02
-#define	MR2_STOP916		0x03
-#define	MR2_RXFIFORDY		0x00
-#define	MR2_RXFIFOHALF		0x04
-#define	MR2_RXFIFOHIGH		0x08
-#define	MR2_RXFIFOFULL		0x0c
-#define	MR2_AUTOCTS		0x10
-#define	MR2_TXRTS		0x20
-#define	MR2_MODENORM		0x00
-#define	MR2_MODEAUTOECHO	0x40
-#define	MR2_MODELOOP		0x80
-#define	MR2_MODEREMECHO		0xc0
-
-/*****************************************************************************/
-
-/*
- *	Baud Rate Generator (BRG) selector values.
- */
-#define	BRG_50			0x00
-#define	BRG_75			0x01
-#define	BRG_150			0x02
-#define	BRG_200			0x03
-#define	BRG_300			0x04
-#define	BRG_450			0x05
-#define	BRG_600			0x06
-#define	BRG_900			0x07
-#define	BRG_1200		0x08
-#define	BRG_1800		0x09
-#define	BRG_2400		0x0a
-#define	BRG_3600		0x0b
-#define	BRG_4800		0x0c
-#define	BRG_7200		0x0d
-#define	BRG_9600		0x0e
-#define	BRG_14400		0x0f
-#define	BRG_19200		0x10
-#define	BRG_28200		0x11
-#define	BRG_38400		0x12
-#define	BRG_57600		0x13
-#define	BRG_115200		0x14
-#define	BRG_230400		0x15
-#define	BRG_GIN0		0x16
-#define	BRG_GIN1		0x17
-#define	BRG_CT0			0x18
-#define	BRG_CT1			0x19
-#define	BRG_RX2TX316		0x1b
-#define	BRG_RX2TX31		0x1c
-
-#define	SC26198_MAXBAUD		921600
-
-/*****************************************************************************/
-
-/*
- *	Command register command definitions.
- */
-#define	CR_NULL			0x04
-#define	CR_ADDRNORMAL		0x0c
-#define	CR_RXRESET		0x14
-#define	CR_TXRESET		0x1c
-#define	CR_CLEARRXERR		0x24
-#define	CR_BREAKRESET		0x2c
-#define	CR_TXSTARTBREAK		0x34
-#define	CR_TXSTOPBREAK		0x3c
-#define	CR_RTSON		0x44
-#define	CR_RTSOFF		0x4c
-#define	CR_ADDRINIT		0x5c
-#define	CR_RXERRBLOCK		0x6c
-#define	CR_TXSENDXON		0x84
-#define	CR_TXSENDXOFF		0x8c
-#define	CR_GANGXONSET		0x94
-#define	CR_GANGXOFFSET		0x9c
-#define	CR_GANGXONINIT		0xa4
-#define	CR_GANGXOFFINIT		0xac
-#define	CR_HOSTXON		0xb4
-#define	CR_HOSTXOFF		0xbc
-#define	CR_CANCELXOFF		0xc4
-#define	CR_ADDRRESET		0xdc
-#define	CR_RESETALLPORTS	0xf4
-#define	CR_RESETALL		0xfc
-
-#define	CR_RXENABLE		0x01
-#define	CR_TXENABLE		0x02
-
-/*****************************************************************************/
-
-/*
- *	Channel status register.
- */
-#define	SR_RXRDY		0x01
-#define	SR_RXFULL		0x02
-#define	SR_TXRDY		0x04
-#define	SR_TXEMPTY		0x08
-#define	SR_RXOVERRUN		0x10
-#define	SR_RXPARITY		0x20
-#define	SR_RXFRAMING		0x40
-#define	SR_RXBREAK		0x80
-
-#define	SR_RXERRS		(SR_RXPARITY | SR_RXFRAMING | SR_RXOVERRUN)
-
-/*****************************************************************************/
-
-/*
- *	Interrupt status register and interrupt mask register bit definitions.
- */
-#define	IR_TXRDY		0x01
-#define	IR_RXRDY		0x02
-#define	IR_RXBREAK		0x04
-#define	IR_XONXOFF		0x10
-#define	IR_ADDRRECOG		0x20
-#define	IR_RXWATCHDOG		0x40
-#define	IR_IOPORT		0x80
-
-/*****************************************************************************/
-
-/*
- *	Interrupt vector register field definitions.
- */
-#define	IVR_CHANMASK		0x07
-#define	IVR_TYPEMASK		0x18
-#define	IVR_CONSTMASK		0xc0
-
-#define	IVR_RXDATA		0x10
-#define	IVR_RXBADDATA		0x18
-#define	IVR_TXDATA		0x08
-#define	IVR_OTHER		0x00
-
-/*****************************************************************************/
-
-/*
- *	BRG timer control register bit definitions.
- */
-#define	BRGCTCR_DISABCLK0	0x00
-#define	BRGCTCR_ENABCLK0	0x08
-#define	BRGCTCR_DISABCLK1	0x00
-#define	BRGCTCR_ENABCLK1	0x80
-
-#define	BRGCTCR_0SCLK16		0x00
-#define	BRGCTCR_0SCLK32		0x01
-#define	BRGCTCR_0SCLK64		0x02
-#define	BRGCTCR_0SCLK128	0x03
-#define	BRGCTCR_0X1		0x04
-#define	BRGCTCR_0X12		0x05
-#define	BRGCTCR_0IO1A		0x06
-#define	BRGCTCR_0GIN0		0x07
-
-#define	BRGCTCR_1SCLK16		0x00
-#define	BRGCTCR_1SCLK32		0x10
-#define	BRGCTCR_1SCLK64		0x20
-#define	BRGCTCR_1SCLK128	0x30
-#define	BRGCTCR_1X1		0x40
-#define	BRGCTCR_1X12		0x50
-#define	BRGCTCR_1IO1B		0x60
-#define	BRGCTCR_1GIN1		0x70
-
-/*****************************************************************************/
-
-/*
- *	Watch dog timer enable register.
- */
-#define	WDTRCR_ENABALL		0xff
-
-/*****************************************************************************/
-
-/*
- *	XON/XOFF interrupt status register.
- */
-#define	XISR_TXCHARMASK		0x03
-#define	XISR_TXCHARNORMAL	0x00
-#define	XISR_TXWAIT		0x01
-#define	XISR_TXXOFFPEND		0x02
-#define	XISR_TXXONPEND		0x03
-
-#define	XISR_TXFLOWMASK		0x0c
-#define	XISR_TXNORMAL		0x00
-#define	XISR_TXSTOPPEND		0x04
-#define	XISR_TXSTARTED		0x08
-#define	XISR_TXSTOPPED		0x0c
-
-#define	XISR_RXFLOWMASK		0x30
-#define	XISR_RXFLOWNONE		0x00
-#define	XISR_RXXONSENT		0x10
-#define	XISR_RXXOFFSENT		0x20
-
-#define	XISR_RXXONGOT		0x40
-#define	XISR_RXXOFFGOT		0x80
-
-/*****************************************************************************/
-
-/*
- *	Current interrupt register.
- */
-#define	CIR_TYPEMASK		0xc0
-#define	CIR_TYPEOTHER		0x00
-#define	CIR_TYPETX		0x40
-#define	CIR_TYPERXGOOD		0x80
-#define	CIR_TYPERXBAD		0xc0
-
-#define	CIR_RXDATA		0x80
-#define	CIR_RXBADDATA		0x40
-#define	CIR_TXDATA		0x40
-
-#define	CIR_CHANMASK		0x07
-#define	CIR_CNTMASK		0x38
-
-#define	CIR_SUBTYPEMASK		0x38
-#define	CIR_SUBNONE		0x00
-#define	CIR_SUBCOS		0x08
-#define	CIR_SUBADDR		0x10
-#define	CIR_SUBXONXOFF		0x18
-#define	CIR_SUBBREAK		0x28
-
-/*****************************************************************************/
-
-/*
- *	Global interrupting channel register.
- */
-#define	GICR_CHANMASK		0x07
-
-/*****************************************************************************/
-
-/*
- *	Global interrupting byte count register.
- */
-#define	GICR_COUNTMASK		0x0f
-
-/*****************************************************************************/
-
-/*
- *	Global interrupting type register.
- */
-#define	GITR_RXMASK		0xc0
-#define	GITR_RXNONE		0x00
-#define	GITR_RXBADDATA		0x80
-#define	GITR_RXGOODDATA		0xc0
-#define	GITR_TXDATA		0x20
-
-#define	GITR_SUBTYPEMASK	0x07
-#define	GITR_SUBNONE		0x00
-#define	GITR_SUBCOS		0x01
-#define	GITR_SUBADDR		0x02
-#define	GITR_SUBXONXOFF		0x03
-#define	GITR_SUBBREAK		0x05
-
-/*****************************************************************************/
-
-/*
- *	Input port change register.
- */
-#define	IPR_CTS			0x01
-#define	IPR_DTR			0x02
-#define	IPR_RTS			0x04
-#define	IPR_DCD			0x08
-#define	IPR_CTSCHANGE		0x10
-#define	IPR_DTRCHANGE		0x20
-#define	IPR_RTSCHANGE		0x40
-#define	IPR_DCDCHANGE		0x80
-
-#define	IPR_CHANGEMASK		0xf0
-
-/*****************************************************************************/
-
-/*
- *	IO port interrupt and output register.
- */
-#define	IOPR_CTS		0x01
-#define	IOPR_DTR		0x02
-#define	IOPR_RTS		0x04
-#define	IOPR_DCD		0x08
-#define	IOPR_CTSCOS		0x10
-#define	IOPR_DTRCOS		0x20
-#define	IOPR_RTSCOS		0x40
-#define	IOPR_DCDCOS		0x80
-
-/*****************************************************************************/
-
-/*
- *	IO port configuration register.
- */
-#define	IOPCR_SETCTS		0x00
-#define	IOPCR_SETDTR		0x04
-#define	IOPCR_SETRTS		0x10
-#define	IOPCR_SETDCD		0x00
-
-#define	IOPCR_SETSIGS		(IOPCR_SETRTS | IOPCR_SETRTS | IOPCR_SETDTR | IOPCR_SETDCD)
-
-/*****************************************************************************/
-
-/*
- *	General purpose output select register.
- */
-#define	GPORS_TXC1XA		0x08
-#define	GPORS_TXC16XA		0x09
-#define	GPORS_RXC16XA		0x0a
-#define	GPORS_TXC16XB		0x0b
-#define	GPORS_GPOR3		0x0c
-#define	GPORS_GPOR2		0x0d
-#define	GPORS_GPOR1		0x0e
-#define	GPORS_GPOR0		0x0f
-
-/*****************************************************************************/
-
-/*
- *	General purpose output register.
- */
-#define	GPOR_0			0x01
-#define	GPOR_1			0x02
-#define	GPOR_2			0x04
-#define	GPOR_3			0x08
-
-/*****************************************************************************/
-
-/*
- *	General purpose output clock register.
- */
-#define	GPORC_0NONE		0x00
-#define	GPORC_0GIN0		0x01
-#define	GPORC_0GIN1		0x02
-#define	GPORC_0IO3A		0x02
-
-#define	GPORC_1NONE		0x00
-#define	GPORC_1GIN0		0x04
-#define	GPORC_1GIN1		0x08
-#define	GPORC_1IO3C		0x0c
-
-#define	GPORC_2NONE		0x00
-#define	GPORC_2GIN0		0x10
-#define	GPORC_2GIN1		0x20
-#define	GPORC_2IO3E		0x20
-
-#define	GPORC_3NONE		0x00
-#define	GPORC_3GIN0		0x40
-#define	GPORC_3GIN1		0x80
-#define	GPORC_3IO3G		0xc0
-
-/*****************************************************************************/
-
-/*
- *	General purpose output data register.
- */
-#define	GPOD_0MASK		0x03
-#define	GPOD_0SET1		0x00
-#define	GPOD_0SET0		0x01
-#define	GPOD_0SETR0		0x02
-#define	GPOD_0SETIO3B		0x03
-
-#define	GPOD_1MASK		0x0c
-#define	GPOD_1SET1		0x00
-#define	GPOD_1SET0		0x04
-#define	GPOD_1SETR0		0x08
-#define	GPOD_1SETIO3D		0x0c
-
-#define	GPOD_2MASK		0x30
-#define	GPOD_2SET1		0x00
-#define	GPOD_2SET0		0x10
-#define	GPOD_2SETR0		0x20
-#define	GPOD_2SETIO3F		0x30
-
-#define	GPOD_3MASK		0xc0
-#define	GPOD_3SET1		0x00
-#define	GPOD_3SET0		0x40
-#define	GPOD_3SETR0		0x80
-#define	GPOD_3SETIO3H		0xc0
-
-/*****************************************************************************/
-#endif
diff --git a/ANDROID_3.4.5/include/linux/scatterlist.h b/ANDROID_3.4.5/include/linux/scatterlist.h
deleted file mode 100644
index ac9586da..00000000
--- a/ANDROID_3.4.5/include/linux/scatterlist.h
+++ /dev/null
@@ -1,269 +0,0 @@
-#ifndef _LINUX_SCATTERLIST_H
-#define _LINUX_SCATTERLIST_H
-
-#include <linux/string.h>
-#include <linux/bug.h>
-#include <linux/mm.h>
-
-#include <asm/types.h>
-#include <asm/scatterlist.h>
-#include <asm/io.h>
-
-struct sg_table {
-	struct scatterlist *sgl;	/* the list */
-	unsigned int nents;		/* number of mapped entries */
-	unsigned int orig_nents;	/* original size of list */
-};
-
-/*
- * Notes on SG table design.
- *
- * Architectures must provide an unsigned long page_link field in the
- * scatterlist struct. We use that to place the page pointer AND encode
- * information about the sg table as well. The two lower bits are reserved
- * for this information.
- *
- * If bit 0 is set, then the page_link contains a pointer to the next sg
- * table list. Otherwise the next entry is at sg + 1.
- *
- * If bit 1 is set, then this sg entry is the last element in a list.
- *
- * See sg_next().
- *
- */
-
-#define SG_MAGIC	0x87654321
-
-/*
- * We overload the LSB of the page pointer to indicate whether it's
- * a valid sg entry, or whether it points to the start of a new scatterlist.
- * Those low bits are there for everyone! (thanks mason :-)
- */
-#define sg_is_chain(sg)		((sg)->page_link & 0x01)
-#define sg_is_last(sg)		((sg)->page_link & 0x02)
-#define sg_chain_ptr(sg)	\
-	((struct scatterlist *) ((sg)->page_link & ~0x03))
-
-/**
- * sg_assign_page - Assign a given page to an SG entry
- * @sg:		    SG entry
- * @page:	    The page
- *
- * Description:
- *   Assign page to sg entry. Also see sg_set_page(), the most commonly used
- *   variant.
- *
- **/
-static inline void sg_assign_page(struct scatterlist *sg, struct page *page)
-{
-	unsigned long page_link = sg->page_link & 0x3;
-
-	/*
-	 * In order for the low bit stealing approach to work, pages
-	 * must be aligned at a 32-bit boundary as a minimum.
-	 */
-	BUG_ON((unsigned long) page & 0x03);
-#ifdef CONFIG_DEBUG_SG
-	BUG_ON(sg->sg_magic != SG_MAGIC);
-	BUG_ON(sg_is_chain(sg));
-#endif
-	sg->page_link = page_link | (unsigned long) page;
-}
-
-/**
- * sg_set_page - Set sg entry to point at given page
- * @sg:		 SG entry
- * @page:	 The page
- * @len:	 Length of data
- * @offset:	 Offset into page
- *
- * Description:
- *   Use this function to set an sg entry pointing at a page, never assign
- *   the page directly. We encode sg table information in the lower bits
- *   of the page pointer. See sg_page() for looking up the page belonging
- *   to an sg entry.
- *
- **/
-static inline void sg_set_page(struct scatterlist *sg, struct page *page,
-			       unsigned int len, unsigned int offset)
-{
-	sg_assign_page(sg, page);
-	sg->offset = offset;
-	sg->length = len;
-}
-
-static inline struct page *sg_page(struct scatterlist *sg)
-{
-#ifdef CONFIG_DEBUG_SG
-	BUG_ON(sg->sg_magic != SG_MAGIC);
-	BUG_ON(sg_is_chain(sg));
-#endif
-	return (struct page *)((sg)->page_link & ~0x3);
-}
-
-/**
- * sg_set_buf - Set sg entry to point at given data
- * @sg:		 SG entry
- * @buf:	 Data
- * @buflen:	 Data length
- *
- **/
-static inline void sg_set_buf(struct scatterlist *sg, const void *buf,
-			      unsigned int buflen)
-{
-	sg_set_page(sg, virt_to_page(buf), buflen, offset_in_page(buf));
-}
-
-/*
- * Loop over each sg element, following the pointer to a new list if necessary
- */
-#define for_each_sg(sglist, sg, nr, __i)	\
-	for (__i = 0, sg = (sglist); __i < (nr); __i++, sg = sg_next(sg))
-
-/**
- * sg_chain - Chain two sglists together
- * @prv:	First scatterlist
- * @prv_nents:	Number of entries in prv
- * @sgl:	Second scatterlist
- *
- * Description:
- *   Links @prv@ and @sgl@ together, to form a longer scatterlist.
- *
- **/
-static inline void sg_chain(struct scatterlist *prv, unsigned int prv_nents,
-			    struct scatterlist *sgl)
-{
-#ifndef ARCH_HAS_SG_CHAIN
-	BUG();
-#endif
-
-	/*
-	 * offset and length are unused for chain entry.  Clear them.
-	 */
-	prv[prv_nents - 1].offset = 0;
-	prv[prv_nents - 1].length = 0;
-
-	/*
-	 * Set lowest bit to indicate a link pointer, and make sure to clear
-	 * the termination bit if it happens to be set.
-	 */
-	prv[prv_nents - 1].page_link = ((unsigned long) sgl | 0x01) & ~0x02;
-}
-
-/**
- * sg_mark_end - Mark the end of the scatterlist
- * @sg:		 SG entryScatterlist
- *
- * Description:
- *   Marks the passed in sg entry as the termination point for the sg
- *   table. A call to sg_next() on this entry will return NULL.
- *
- **/
-static inline void sg_mark_end(struct scatterlist *sg)
-{
-#ifdef CONFIG_DEBUG_SG
-	BUG_ON(sg->sg_magic != SG_MAGIC);
-#endif
-	/*
-	 * Set termination bit, clear potential chain bit
-	 */
-	sg->page_link |= 0x02;
-	sg->page_link &= ~0x01;
-}
-
-/**
- * sg_phys - Return physical address of an sg entry
- * @sg:	     SG entry
- *
- * Description:
- *   This calls page_to_phys() on the page in this sg entry, and adds the
- *   sg offset. The caller must know that it is legal to call page_to_phys()
- *   on the sg page.
- *
- **/
-static inline dma_addr_t sg_phys(struct scatterlist *sg)
-{
-	return page_to_phys(sg_page(sg)) + sg->offset;
-}
-
-/**
- * sg_virt - Return virtual address of an sg entry
- * @sg:      SG entry
- *
- * Description:
- *   This calls page_address() on the page in this sg entry, and adds the
- *   sg offset. The caller must know that the sg page has a valid virtual
- *   mapping.
- *
- **/
-static inline void *sg_virt(struct scatterlist *sg)
-{
-	return page_address(sg_page(sg)) + sg->offset;
-}
-
-struct scatterlist *sg_next(struct scatterlist *);
-struct scatterlist *sg_last(struct scatterlist *s, unsigned int);
-void sg_init_table(struct scatterlist *, unsigned int);
-void sg_init_one(struct scatterlist *, const void *, unsigned int);
-
-typedef struct scatterlist *(sg_alloc_fn)(unsigned int, gfp_t);
-typedef void (sg_free_fn)(struct scatterlist *, unsigned int);
-
-void __sg_free_table(struct sg_table *, unsigned int, sg_free_fn *);
-void sg_free_table(struct sg_table *);
-int __sg_alloc_table(struct sg_table *, unsigned int, unsigned int, gfp_t,
-		     sg_alloc_fn *);
-int sg_alloc_table(struct sg_table *, unsigned int, gfp_t);
-
-size_t sg_copy_from_buffer(struct scatterlist *sgl, unsigned int nents,
-			   void *buf, size_t buflen);
-size_t sg_copy_to_buffer(struct scatterlist *sgl, unsigned int nents,
-			 void *buf, size_t buflen);
-
-/*
- * Maximum number of entries that will be allocated in one piece, if
- * a list larger than this is required then chaining will be utilized.
- */
-#define SG_MAX_SINGLE_ALLOC		(PAGE_SIZE / sizeof(struct scatterlist))
-
-
-/*
- * Mapping sg iterator
- *
- * Iterates over sg entries mapping page-by-page.  On each successful
- * iteration, @miter->page points to the mapped page and
- * @miter->length bytes of data can be accessed at @miter->addr.  As
- * long as an interation is enclosed between start and stop, the user
- * is free to choose control structure and when to stop.
- *
- * @miter->consumed is set to @miter->length on each iteration.  It
- * can be adjusted if the user can't consume all the bytes in one go.
- * Also, a stopped iteration can be resumed by calling next on it.
- * This is useful when iteration needs to release all resources and
- * continue later (e.g. at the next interrupt).
- */
-
-#define SG_MITER_ATOMIC		(1 << 0)	 /* use kmap_atomic */
-#define SG_MITER_TO_SG		(1 << 1)	/* flush back to phys on unmap */
-#define SG_MITER_FROM_SG	(1 << 2)	/* nop */
-
-struct sg_mapping_iter {
-	/* the following three fields can be accessed directly */
-	struct page		*page;		/* currently mapped page */
-	void			*addr;		/* pointer to the mapped area */
-	size_t			length;		/* length of the mapped area */
-	size_t			consumed;	/* number of consumed bytes */
-
-	/* these are internal states, keep away */
-	struct scatterlist	*__sg;		/* current entry */
-	unsigned int		__nents;	/* nr of remaining entries */
-	unsigned int		__offset;	/* offset within sg */
-	unsigned int		__flags;
-};
-
-void sg_miter_start(struct sg_mapping_iter *miter, struct scatterlist *sgl,
-		    unsigned int nents, unsigned int flags);
-bool sg_miter_next(struct sg_mapping_iter *miter);
-void sg_miter_stop(struct sg_mapping_iter *miter);
-
-#endif /* _LINUX_SCATTERLIST_H */
diff --git a/ANDROID_3.4.5/include/linux/scc.h b/ANDROID_3.4.5/include/linux/scc.h
deleted file mode 100644
index 3495bd95..00000000
--- a/ANDROID_3.4.5/include/linux/scc.h
+++ /dev/null
@@ -1,252 +0,0 @@
-/* $Id: scc.h,v 1.29 1997/04/02 14:56:45 jreuter Exp jreuter $ */
-
-#ifndef	_SCC_H
-#define	_SCC_H
-
-
-/* selection of hardware types */
-
-#define PA0HZP		0x00	/* hardware type for PA0HZP SCC card and compatible */
-#define EAGLE		0x01    /* hardware type for EAGLE card */
-#define PC100		0x02	/* hardware type for PC100 card */
-#define PRIMUS		0x04	/* hardware type for PRIMUS-PC (DG9BL) card */
-#define DRSI		0x08	/* hardware type for DRSI PC*Packet card */
-#define BAYCOM		0x10	/* hardware type for BayCom (U)SCC */
-
-/* DEV ioctl() commands */
-
-enum SCC_ioctl_cmds {
-	SIOCSCCRESERVED = SIOCDEVPRIVATE,
-	SIOCSCCCFG,
-	SIOCSCCINI,
-	SIOCSCCCHANINI,
-	SIOCSCCSMEM,
-	SIOCSCCGKISS,
-	SIOCSCCSKISS,
-	SIOCSCCGSTAT,
-	SIOCSCCCAL
-};
-
-/* Device parameter control (from WAMPES) */
-
-enum L1_params {
-	PARAM_DATA,
-	PARAM_TXDELAY,
-	PARAM_PERSIST,
-	PARAM_SLOTTIME,
-	PARAM_TXTAIL,
-	PARAM_FULLDUP,
-	PARAM_SOFTDCD,		/* was: PARAM_HW */
-	PARAM_MUTE,		/* ??? */
-	PARAM_DTR,
-	PARAM_RTS,
-	PARAM_SPEED,
-	PARAM_ENDDELAY,		/* ??? */
-	PARAM_GROUP,
-	PARAM_IDLE,
-	PARAM_MIN,
-	PARAM_MAXKEY,
-	PARAM_WAIT,
-	PARAM_MAXDEFER,
-	PARAM_TX,
-	PARAM_HWEVENT = 31,
-	PARAM_RETURN = 255	/* reset kiss mode */
-};
-
-/* fulldup parameter */
-
-enum FULLDUP_modes {
-	KISS_DUPLEX_HALF,	/* normal CSMA operation */
-	KISS_DUPLEX_FULL,	/* fullduplex, key down trx after transmission */
-	KISS_DUPLEX_LINK,	/* fullduplex, key down trx after 'idletime' sec */
-	KISS_DUPLEX_OPTIMA	/* fullduplex, let the protocol layer control the hw */
-};
-
-/* misc. parameters */
-
-#define TIMER_OFF	65535U	/* to switch off timers */
-#define NO_SUCH_PARAM	65534U	/* param not implemented */
-
-/* HWEVENT parameter */
-
-enum HWEVENT_opts {
-	HWEV_DCD_ON,
-	HWEV_DCD_OFF,
-	HWEV_ALL_SENT
-};
-
-/* channel grouping */
-
-#define RXGROUP		0100	/* if set, only tx when all channels clear */
-#define TXGROUP		0200	/* if set, don't transmit simultaneously */
-
-/* Tx/Rx clock sources */
-
-enum CLOCK_sources {
-	CLK_DPLL,	/* normal halfduplex operation */
-	CLK_EXTERNAL,	/* external clocking (G3RUH/DF9IC modems) */
-	CLK_DIVIDER,	/* Rx = DPLL, Tx = divider (fullduplex with */
-			/* modems without clock regeneration */
-	CLK_BRG		/* experimental fullduplex mode with DPLL/BRG for */
-			/* MODEMs without clock recovery */
-};
-
-/* Tx state */
-
-enum TX_state {
-	TXS_IDLE,	/* Transmitter off, no data pending */
-	TXS_BUSY,	/* waiting for permission to send / tailtime */
-	TXS_ACTIVE,	/* Transmitter on, sending data */
-	TXS_NEWFRAME,	/* reset CRC and send (next) frame */
-	TXS_IDLE2,	/* Transmitter on, no data pending */
-	TXS_WAIT,	/* Waiting for Mintime to expire */
-	TXS_TIMEOUT	/* We had a transmission timeout */
-};
-
-typedef unsigned long io_port;	/* type definition for an 'io port address' */
-
-/* SCC statistical information */
-
-struct scc_stat {
-        long rxints;            /* Receiver interrupts */
-        long txints;            /* Transmitter interrupts */
-        long exints;            /* External/status interrupts */
-        long spints;            /* Special receiver interrupts */
-
-        long txframes;          /* Packets sent */
-        long rxframes;          /* Number of Frames Actually Received */
-        long rxerrs;            /* CRC Errors */
-        long txerrs;		/* KISS errors */
-        
-	unsigned int nospace;	/* "Out of buffers" */
-	unsigned int rx_over;	/* Receiver Overruns */
-	unsigned int tx_under;	/* Transmitter Underruns */
-
-	unsigned int tx_state;	/* Transmitter state */
-	int tx_queued;		/* tx frames enqueued */
-
-	unsigned int maxqueue;	/* allocated tx_buffers */
-	unsigned int bufsize;	/* used buffersize */
-};
-
-struct scc_modem {
-	long speed;		/* Line speed, bps */
-	char clocksrc;		/* 0 = DPLL, 1 = external, 2 = divider */
-	char nrz;		/* NRZ instead of NRZI */	
-};
-
-struct scc_kiss_cmd {
-	int  	 command;	/* one of the KISS-Commands defined above */
-	unsigned param;		/* KISS-Param */
-};
-
-struct scc_hw_config {
-	io_port data_a;		/* data port channel A */
-	io_port ctrl_a;		/* control port channel A */
-	io_port data_b;		/* data port channel B */
-	io_port ctrl_b;		/* control port channel B */
-	io_port vector_latch;	/* INTACK-Latch (#) */
-	io_port	special;	/* special function port */
-
-	int	irq;		/* irq */
-	long	clock;		/* clock */
-	char	option;		/* command for function port */
-
-	char brand;		/* hardware type */
-	char escc;		/* use ext. features of a 8580/85180/85280 */
-};
-
-/* (#) only one INTACK latch allowed. */
-
-
-struct scc_mem_config {
-	unsigned int dummy;
-	unsigned int bufsize;
-};
-
-struct scc_calibrate {
-	unsigned int time;
-	unsigned char pattern;
-};
-
-#ifdef __KERNEL__
-
-enum {TX_OFF, TX_ON};	/* command for scc_key_trx() */
-
-/* Vector masks in RR2B */
-
-#define VECTOR_MASK	0x06
-#define TXINT		0x00
-#define EXINT		0x02
-#define RXINT		0x04
-#define SPINT		0x06
-
-#ifdef CONFIG_SCC_DELAY
-#define Inb(port)	inb_p(port)
-#define Outb(port, val)	outb_p(val, port)
-#else
-#define Inb(port)	inb(port)
-#define Outb(port, val)	outb(val, port)
-#endif
-
-/* SCC channel control structure for KISS */
-
-struct scc_kiss {
-	unsigned char txdelay;		/* Transmit Delay 10 ms/cnt */
-	unsigned char persist;		/* Persistence (0-255) as a % */
-	unsigned char slottime;		/* Delay to wait on persistence hit */
-	unsigned char tailtime;		/* Delay after last byte written */
-	unsigned char fulldup;		/* Full Duplex mode 0=CSMA 1=DUP 2=ALWAYS KEYED */
-	unsigned char waittime;		/* Waittime before any transmit attempt */
-	unsigned int  maxkeyup;		/* Maximum time to transmit (seconds) */
-	unsigned int  mintime;		/* Minimal offtime after MAXKEYUP timeout (seconds) */
-	unsigned int  idletime;		/* Maximum idle time in ALWAYS KEYED mode (seconds) */
-	unsigned int  maxdefer;		/* Timer for CSMA channel busy limit */
-	unsigned char tx_inhibit;	/* Transmit is not allowed when set */	
-	unsigned char group;		/* Group ID for AX.25 TX interlocking */
-	unsigned char mode;		/* 'normal' or 'hwctrl' mode (unused) */
-	unsigned char softdcd;		/* Use DPLL instead of DCD pin for carrier detect */
-};
-
-
-/* SCC channel structure */
-
-struct scc_channel {
-	int init;			/* channel exists? */
-
-	struct net_device *dev;		/* link to device control structure */
-	struct net_device_stats dev_stat;/* device statistics */
-
-	char brand;			/* manufacturer of the board */
-	long clock;			/* used clock */
-
-	io_port ctrl;			/* I/O address of CONTROL register */
-	io_port	data;			/* I/O address of DATA register */
-	io_port special;		/* I/O address of special function port */
-	int irq;			/* Number of Interrupt */
-
-	char option;
-	char enhanced;			/* Enhanced SCC support */
-
-	unsigned char wreg[16]; 	/* Copy of last written value in WRx */
-	unsigned char status;		/* Copy of R0 at last external interrupt */
-	unsigned char dcd;		/* DCD status */
-
-        struct scc_kiss kiss;		/* control structure for KISS params */
-        struct scc_stat stat;		/* statistical information */
-        struct scc_modem modem; 	/* modem information */
-
-        struct sk_buff_head tx_queue;	/* next tx buffer */
-        struct sk_buff *rx_buff;	/* pointer to frame currently received */
-        struct sk_buff *tx_buff;	/* pointer to frame currently transmitted */
-
-	/* Timer */
-	struct timer_list tx_t;		/* tx timer for this channel */
-	struct timer_list tx_wdog;	/* tx watchdogs */
-	
-	/* Channel lock */
-	spinlock_t	lock;		/* Channel guard lock */
-};
-
-#endif /* defined(__KERNEL__) */
-#endif /* defined(_SCC_H) */
diff --git a/ANDROID_3.4.5/include/linux/sched.h b/ANDROID_3.4.5/include/linux/sched.h
deleted file mode 100644
index 5fb37196..00000000
--- a/ANDROID_3.4.5/include/linux/sched.h
+++ /dev/null
@@ -1,2826 +0,0 @@
-#ifndef _LINUX_SCHED_H
-#define _LINUX_SCHED_H
-
-/*
- * cloning flags:
- */
-#define CSIGNAL		0x000000ff	/* signal mask to be sent at exit */
-#define CLONE_VM	0x00000100	/* set if VM shared between processes */
-#define CLONE_FS	0x00000200	/* set if fs info shared between processes */
-#define CLONE_FILES	0x00000400	/* set if open files shared between processes */
-#define CLONE_SIGHAND	0x00000800	/* set if signal handlers and blocked signals shared */
-#define CLONE_PTRACE	0x00002000	/* set if we want to let tracing continue on the child too */
-#define CLONE_VFORK	0x00004000	/* set if the parent wants the child to wake it up on mm_release */
-#define CLONE_PARENT	0x00008000	/* set if we want to have the same parent as the cloner */
-#define CLONE_THREAD	0x00010000	/* Same thread group? */
-#define CLONE_NEWNS	0x00020000	/* New namespace group? */
-#define CLONE_SYSVSEM	0x00040000	/* share system V SEM_UNDO semantics */
-#define CLONE_SETTLS	0x00080000	/* create a new TLS for the child */
-#define CLONE_PARENT_SETTID	0x00100000	/* set the TID in the parent */
-#define CLONE_CHILD_CLEARTID	0x00200000	/* clear the TID in the child */
-#define CLONE_DETACHED		0x00400000	/* Unused, ignored */
-#define CLONE_UNTRACED		0x00800000	/* set if the tracing process can't force CLONE_PTRACE on this clone */
-#define CLONE_CHILD_SETTID	0x01000000	/* set the TID in the child */
-/* 0x02000000 was previously the unused CLONE_STOPPED (Start in stopped state)
-   and is now available for re-use. */
-#define CLONE_NEWUTS		0x04000000	/* New utsname group? */
-#define CLONE_NEWIPC		0x08000000	/* New ipcs */
-#define CLONE_NEWUSER		0x10000000	/* New user namespace */
-#define CLONE_NEWPID		0x20000000	/* New pid namespace */
-#define CLONE_NEWNET		0x40000000	/* New network namespace */
-#define CLONE_IO		0x80000000	/* Clone io context */
-
-/*
- * Scheduling policies
- */
-#define SCHED_NORMAL		0
-#define SCHED_FIFO		1
-#define SCHED_RR		2
-#define SCHED_BATCH		3
-/* SCHED_ISO: reserved but not implemented yet */
-#define SCHED_IDLE		5
-/* Can be ORed in to make sure the process is reverted back to SCHED_NORMAL on fork */
-#define SCHED_RESET_ON_FORK     0x40000000
-
-#ifdef __KERNEL__
-
-struct sched_param {
-	int sched_priority;
-};
-
-#include <asm/param.h>	/* for HZ */
-
-#include <linux/capability.h>
-#include <linux/threads.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/timex.h>
-#include <linux/jiffies.h>
-#include <linux/rbtree.h>
-#include <linux/thread_info.h>
-#include <linux/cpumask.h>
-#include <linux/errno.h>
-#include <linux/nodemask.h>
-#include <linux/mm_types.h>
-
-#include <asm/page.h>
-#include <asm/ptrace.h>
-#include <asm/cputime.h>
-
-#include <linux/smp.h>
-#include <linux/sem.h>
-#include <linux/signal.h>
-#include <linux/compiler.h>
-#include <linux/completion.h>
-#include <linux/pid.h>
-#include <linux/percpu.h>
-#include <linux/topology.h>
-#include <linux/proportions.h>
-#include <linux/seccomp.h>
-#include <linux/rcupdate.h>
-#include <linux/rculist.h>
-#include <linux/rtmutex.h>
-
-#include <linux/time.h>
-#include <linux/param.h>
-#include <linux/resource.h>
-#include <linux/timer.h>
-#include <linux/hrtimer.h>
-#include <linux/task_io_accounting.h>
-#include <linux/latencytop.h>
-#include <linux/cred.h>
-#include <linux/llist.h>
-
-#include <asm/processor.h>
-
-struct exec_domain;
-struct futex_pi_state;
-struct robust_list_head;
-struct bio_list;
-struct fs_struct;
-struct perf_event_context;
-struct blk_plug;
-
-/*
- * List of flags we want to share for kernel threads,
- * if only because they are not used by them anyway.
- */
-#define CLONE_KERNEL	(CLONE_FS | CLONE_FILES | CLONE_SIGHAND)
-
-/*
- * These are the constant used to fake the fixed-point load-average
- * counting. Some notes:
- *  - 11 bit fractions expand to 22 bits by the multiplies: this gives
- *    a load-average precision of 10 bits integer + 11 bits fractional
- *  - if you want to count load-averages more often, you need more
- *    precision, or rounding will get you. With 2-second counting freq,
- *    the EXP_n values would be 1981, 2034 and 2043 if still using only
- *    11 bit fractions.
- */
-extern unsigned long avenrun[];		/* Load averages */
-extern void get_avenrun(unsigned long *loads, unsigned long offset, int shift);
-
-#define FSHIFT		11		/* nr of bits of precision */
-#define FIXED_1		(1<<FSHIFT)	/* 1.0 as fixed-point */
-#define LOAD_FREQ	(5*HZ+1)	/* 5 sec intervals */
-#define EXP_1		1884		/* 1/exp(5sec/1min) as fixed-point */
-#define EXP_5		2014		/* 1/exp(5sec/5min) */
-#define EXP_15		2037		/* 1/exp(5sec/15min) */
-
-#define CALC_LOAD(load,exp,n) \
-	load *= exp; \
-	load += n*(FIXED_1-exp); \
-	load >>= FSHIFT;
-
-extern unsigned long total_forks;
-extern int nr_threads;
-DECLARE_PER_CPU(unsigned long, process_counts);
-extern int nr_processes(void);
-extern unsigned long nr_running(void);
-extern unsigned long nr_uninterruptible(void);
-extern unsigned long nr_iowait(void);
-extern unsigned long nr_iowait_cpu(int cpu);
-extern unsigned long this_cpu_load(void);
-
-
-extern void calc_global_load(unsigned long ticks);
-
-extern unsigned long get_parent_ip(unsigned long addr);
-
-struct seq_file;
-struct cfs_rq;
-struct task_group;
-#ifdef CONFIG_SCHED_DEBUG
-extern void proc_sched_show_task(struct task_struct *p, struct seq_file *m);
-extern void proc_sched_set_task(struct task_struct *p);
-extern void
-print_cfs_rq(struct seq_file *m, int cpu, struct cfs_rq *cfs_rq);
-#else
-static inline void
-proc_sched_show_task(struct task_struct *p, struct seq_file *m)
-{
-}
-static inline void proc_sched_set_task(struct task_struct *p)
-{
-}
-static inline void
-print_cfs_rq(struct seq_file *m, int cpu, struct cfs_rq *cfs_rq)
-{
-}
-#endif
-
-/*
- * Task state bitmask. NOTE! These bits are also
- * encoded in fs/proc/array.c: get_task_state().
- *
- * We have two separate sets of flags: task->state
- * is about runnability, while task->exit_state are
- * about the task exiting. Confusing, but this way
- * modifying one set can't modify the other one by
- * mistake.
- */
-#define TASK_RUNNING		0
-#define TASK_INTERRUPTIBLE	1
-#define TASK_UNINTERRUPTIBLE	2
-#define __TASK_STOPPED		4
-#define __TASK_TRACED		8
-/* in tsk->exit_state */
-#define EXIT_ZOMBIE		16
-#define EXIT_DEAD		32
-/* in tsk->state again */
-#define TASK_DEAD		64
-#define TASK_WAKEKILL		128
-#define TASK_WAKING		256
-#define TASK_STATE_MAX		512
-
-#define TASK_STATE_TO_CHAR_STR "RSDTtZXxKW"
-
-extern char ___assert_task_state[1 - 2*!!(
-		sizeof(TASK_STATE_TO_CHAR_STR)-1 != ilog2(TASK_STATE_MAX)+1)];
-
-/* Convenience macros for the sake of set_task_state */
-#define TASK_KILLABLE		(TASK_WAKEKILL | TASK_UNINTERRUPTIBLE)
-#define TASK_STOPPED		(TASK_WAKEKILL | __TASK_STOPPED)
-#define TASK_TRACED		(TASK_WAKEKILL | __TASK_TRACED)
-
-/* Convenience macros for the sake of wake_up */
-#define TASK_NORMAL		(TASK_INTERRUPTIBLE | TASK_UNINTERRUPTIBLE)
-#define TASK_ALL		(TASK_NORMAL | __TASK_STOPPED | __TASK_TRACED)
-
-/* get_task_state() */
-#define TASK_REPORT		(TASK_RUNNING | TASK_INTERRUPTIBLE | \
-				 TASK_UNINTERRUPTIBLE | __TASK_STOPPED | \
-				 __TASK_TRACED)
-
-#define task_is_traced(task)	((task->state & __TASK_TRACED) != 0)
-#define task_is_stopped(task)	((task->state & __TASK_STOPPED) != 0)
-#define task_is_dead(task)	((task)->exit_state != 0)
-#define task_is_stopped_or_traced(task)	\
-			((task->state & (__TASK_STOPPED | __TASK_TRACED)) != 0)
-#define task_contributes_to_load(task)	\
-				((task->state & TASK_UNINTERRUPTIBLE) != 0 && \
-				 (task->flags & PF_FROZEN) == 0)
-
-#define __set_task_state(tsk, state_value)		\
-	do { (tsk)->state = (state_value); } while (0)
-#define set_task_state(tsk, state_value)		\
-	set_mb((tsk)->state, (state_value))
-
-/*
- * set_current_state() includes a barrier so that the write of current->state
- * is correctly serialised wrt the caller's subsequent test of whether to
- * actually sleep:
- *
- *	set_current_state(TASK_UNINTERRUPTIBLE);
- *	if (do_i_need_to_sleep())
- *		schedule();
- *
- * If the caller does not need such serialisation then use __set_current_state()
- */
-#define __set_current_state(state_value)			\
-	do { current->state = (state_value); } while (0)
-#define set_current_state(state_value)		\
-	set_mb(current->state, (state_value))
-
-/* Task command name length */
-#define TASK_COMM_LEN 16
-
-#include <linux/spinlock.h>
-
-/*
- * This serializes "schedule()" and also protects
- * the run-queue from deletions/modifications (but
- * _adding_ to the beginning of the run-queue has
- * a separate lock).
- */
-extern rwlock_t tasklist_lock;
-extern spinlock_t mmlist_lock;
-
-struct task_struct;
-
-#ifdef CONFIG_PROVE_RCU
-extern int lockdep_tasklist_lock_is_held(void);
-#endif /* #ifdef CONFIG_PROVE_RCU */
-
-extern void sched_init(void);
-extern void sched_init_smp(void);
-extern asmlinkage void schedule_tail(struct task_struct *prev);
-extern void init_idle(struct task_struct *idle, int cpu);
-extern void init_idle_bootup_task(struct task_struct *idle);
-
-extern int runqueue_is_locked(int cpu);
-
-#if defined(CONFIG_SMP) && defined(CONFIG_NO_HZ)
-extern void select_nohz_load_balancer(int stop_tick);
-extern void set_cpu_sd_state_idle(void);
-extern int get_nohz_timer_target(void);
-#else
-static inline void select_nohz_load_balancer(int stop_tick) { }
-static inline void set_cpu_sd_state_idle(void) { }
-#endif
-
-/*
- * Only dump TASK_* tasks. (0 for all tasks)
- */
-extern void show_state_filter(unsigned long state_filter);
-
-static inline void show_state(void)
-{
-	show_state_filter(0);
-}
-
-extern void show_regs(struct pt_regs *);
-
-/*
- * TASK is a pointer to the task whose backtrace we want to see (or NULL for current
- * task), SP is the stack pointer of the first frame that should be shown in the back
- * trace (or NULL if the entire call-chain of the task should be shown).
- */
-extern void show_stack(struct task_struct *task, unsigned long *sp);
-
-void io_schedule(void);
-long io_schedule_timeout(long timeout);
-
-extern void cpu_init (void);
-extern void trap_init(void);
-extern void update_process_times(int user);
-extern void scheduler_tick(void);
-
-extern void sched_show_task(struct task_struct *p);
-
-#ifdef CONFIG_LOCKUP_DETECTOR
-extern void touch_softlockup_watchdog(void);
-extern void touch_softlockup_watchdog_sync(void);
-extern void touch_all_softlockup_watchdogs(void);
-extern int proc_dowatchdog_thresh(struct ctl_table *table, int write,
-				  void __user *buffer,
-				  size_t *lenp, loff_t *ppos);
-extern unsigned int  softlockup_panic;
-void lockup_detector_init(void);
-#else
-static inline void touch_softlockup_watchdog(void)
-{
-}
-static inline void touch_softlockup_watchdog_sync(void)
-{
-}
-static inline void touch_all_softlockup_watchdogs(void)
-{
-}
-static inline void lockup_detector_init(void)
-{
-}
-#endif
-
-#ifdef CONFIG_DETECT_HUNG_TASK
-extern unsigned int  sysctl_hung_task_panic;
-extern unsigned long sysctl_hung_task_check_count;
-extern unsigned long sysctl_hung_task_timeout_secs;
-extern unsigned long sysctl_hung_task_warnings;
-extern int proc_dohung_task_timeout_secs(struct ctl_table *table, int write,
-					 void __user *buffer,
-					 size_t *lenp, loff_t *ppos);
-#else
-/* Avoid need for ifdefs elsewhere in the code */
-enum { sysctl_hung_task_timeout_secs = 0 };
-#endif
-
-/* Attach to any functions which should be ignored in wchan output. */
-#define __sched		__attribute__((__section__(".sched.text")))
-
-/* Linker adds these: start and end of __sched functions */
-extern char __sched_text_start[], __sched_text_end[];
-
-/* Is this address in the __sched functions? */
-extern int in_sched_functions(unsigned long addr);
-
-#define	MAX_SCHEDULE_TIMEOUT	LONG_MAX
-extern signed long schedule_timeout(signed long timeout);
-extern signed long schedule_timeout_interruptible(signed long timeout);
-extern signed long schedule_timeout_killable(signed long timeout);
-extern signed long schedule_timeout_uninterruptible(signed long timeout);
-asmlinkage void schedule(void);
-extern void schedule_preempt_disabled(void);
-extern int mutex_spin_on_owner(struct mutex *lock, struct task_struct *owner);
-
-struct nsproxy;
-struct user_namespace;
-
-/*
- * Default maximum number of active map areas, this limits the number of vmas
- * per mm struct. Users can overwrite this number by sysctl but there is a
- * problem.
- *
- * When a program's coredump is generated as ELF format, a section is created
- * per a vma. In ELF, the number of sections is represented in unsigned short.
- * This means the number of sections should be smaller than 65535 at coredump.
- * Because the kernel adds some informative sections to a image of program at
- * generating coredump, we need some margin. The number of extra sections is
- * 1-3 now and depends on arch. We use "5" as safe margin, here.
- */
-#define MAPCOUNT_ELF_CORE_MARGIN	(5)
-#define DEFAULT_MAX_MAP_COUNT	(USHRT_MAX - MAPCOUNT_ELF_CORE_MARGIN)
-
-extern int sysctl_max_map_count;
-
-#include <linux/aio.h>
-
-#ifdef CONFIG_MMU
-extern void arch_pick_mmap_layout(struct mm_struct *mm);
-extern unsigned long
-arch_get_unmapped_area(struct file *, unsigned long, unsigned long,
-		       unsigned long, unsigned long);
-extern unsigned long
-arch_get_unmapped_area_topdown(struct file *filp, unsigned long addr,
-			  unsigned long len, unsigned long pgoff,
-			  unsigned long flags);
-extern void arch_unmap_area(struct mm_struct *, unsigned long);
-extern void arch_unmap_area_topdown(struct mm_struct *, unsigned long);
-#else
-static inline void arch_pick_mmap_layout(struct mm_struct *mm) {}
-#endif
-
-
-extern void set_dumpable(struct mm_struct *mm, int value);
-extern int get_dumpable(struct mm_struct *mm);
-
-/* mm flags */
-/* dumpable bits */
-#define MMF_DUMPABLE      0  /* core dump is permitted */
-#define MMF_DUMP_SECURELY 1  /* core file is readable only by root */
-
-#define MMF_DUMPABLE_BITS 2
-#define MMF_DUMPABLE_MASK ((1 << MMF_DUMPABLE_BITS) - 1)
-
-/* coredump filter bits */
-#define MMF_DUMP_ANON_PRIVATE	2
-#define MMF_DUMP_ANON_SHARED	3
-#define MMF_DUMP_MAPPED_PRIVATE	4
-#define MMF_DUMP_MAPPED_SHARED	5
-#define MMF_DUMP_ELF_HEADERS	6
-#define MMF_DUMP_HUGETLB_PRIVATE 7
-#define MMF_DUMP_HUGETLB_SHARED  8
-
-#define MMF_DUMP_FILTER_SHIFT	MMF_DUMPABLE_BITS
-#define MMF_DUMP_FILTER_BITS	7
-#define MMF_DUMP_FILTER_MASK \
-	(((1 << MMF_DUMP_FILTER_BITS) - 1) << MMF_DUMP_FILTER_SHIFT)
-#define MMF_DUMP_FILTER_DEFAULT \
-	((1 << MMF_DUMP_ANON_PRIVATE) |	(1 << MMF_DUMP_ANON_SHARED) |\
-	 (1 << MMF_DUMP_HUGETLB_PRIVATE) | MMF_DUMP_MASK_DEFAULT_ELF)
-
-#ifdef CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS
-# define MMF_DUMP_MASK_DEFAULT_ELF	(1 << MMF_DUMP_ELF_HEADERS)
-#else
-# define MMF_DUMP_MASK_DEFAULT_ELF	0
-#endif
-					/* leave room for more dump flags */
-#define MMF_VM_MERGEABLE	16	/* KSM may merge identical pages */
-#define MMF_VM_HUGEPAGE		17	/* set when VM_HUGEPAGE is set on vma */
-
-#define MMF_INIT_MASK		(MMF_DUMPABLE_MASK | MMF_DUMP_FILTER_MASK)
-
-struct sighand_struct {
-	atomic_t		count;
-	struct k_sigaction	action[_NSIG];
-	spinlock_t		siglock;
-	wait_queue_head_t	signalfd_wqh;
-};
-
-struct pacct_struct {
-	int			ac_flag;
-	long			ac_exitcode;
-	unsigned long		ac_mem;
-	cputime_t		ac_utime, ac_stime;
-	unsigned long		ac_minflt, ac_majflt;
-};
-
-struct cpu_itimer {
-	cputime_t expires;
-	cputime_t incr;
-	u32 error;
-	u32 incr_error;
-};
-
-/**
- * struct task_cputime - collected CPU time counts
- * @utime:		time spent in user mode, in &cputime_t units
- * @stime:		time spent in kernel mode, in &cputime_t units
- * @sum_exec_runtime:	total time spent on the CPU, in nanoseconds
- *
- * This structure groups together three kinds of CPU time that are
- * tracked for threads and thread groups.  Most things considering
- * CPU time want to group these counts together and treat all three
- * of them in parallel.
- */
-struct task_cputime {
-	cputime_t utime;
-	cputime_t stime;
-	unsigned long long sum_exec_runtime;
-};
-/* Alternate field names when used to cache expirations. */
-#define prof_exp	stime
-#define virt_exp	utime
-#define sched_exp	sum_exec_runtime
-
-#define INIT_CPUTIME	\
-	(struct task_cputime) {					\
-		.utime = 0,					\
-		.stime = 0,					\
-		.sum_exec_runtime = 0,				\
-	}
-
-/*
- * Disable preemption until the scheduler is running.
- * Reset by start_kernel()->sched_init()->init_idle().
- *
- * We include PREEMPT_ACTIVE to avoid cond_resched() from working
- * before the scheduler is active -- see should_resched().
- */
-#define INIT_PREEMPT_COUNT	(1 + PREEMPT_ACTIVE)
-
-/**
- * struct thread_group_cputimer - thread group interval timer counts
- * @cputime:		thread group interval timers.
- * @running:		non-zero when there are timers running and
- * 			@cputime receives updates.
- * @lock:		lock for fields in this struct.
- *
- * This structure contains the version of task_cputime, above, that is
- * used for thread group CPU timer calculations.
- */
-struct thread_group_cputimer {
-	struct task_cputime cputime;
-	int running;
-	raw_spinlock_t lock;
-};
-
-#include <linux/rwsem.h>
-struct autogroup;
-
-/*
- * NOTE! "signal_struct" does not have its own
- * locking, because a shared signal_struct always
- * implies a shared sighand_struct, so locking
- * sighand_struct is always a proper superset of
- * the locking of signal_struct.
- */
-struct signal_struct {
-	atomic_t		sigcnt;
-	atomic_t		live;
-	int			nr_threads;
-
-	wait_queue_head_t	wait_chldexit;	/* for wait4() */
-
-	/* current thread group signal load-balancing target: */
-	struct task_struct	*curr_target;
-
-	/* shared signal handling: */
-	struct sigpending	shared_pending;
-
-	/* thread group exit support */
-	int			group_exit_code;
-	/* overloaded:
-	 * - notify group_exit_task when ->count is equal to notify_count
-	 * - everyone except group_exit_task is stopped during signal delivery
-	 *   of fatal signals, group_exit_task processes the signal.
-	 */
-	int			notify_count;
-	struct task_struct	*group_exit_task;
-
-	/* thread group stop support, overloads group_exit_code too */
-	int			group_stop_count;
-	unsigned int		flags; /* see SIGNAL_* flags below */
-
-	/*
-	 * PR_SET_CHILD_SUBREAPER marks a process, like a service
-	 * manager, to re-parent orphan (double-forking) child processes
-	 * to this process instead of 'init'. The service manager is
-	 * able to receive SIGCHLD signals and is able to investigate
-	 * the process until it calls wait(). All children of this
-	 * process will inherit a flag if they should look for a
-	 * child_subreaper process at exit.
-	 */
-	unsigned int		is_child_subreaper:1;
-	unsigned int		has_child_subreaper:1;
-
-	/* POSIX.1b Interval Timers */
-	struct list_head posix_timers;
-
-	/* ITIMER_REAL timer for the process */
-	struct hrtimer real_timer;
-	struct pid *leader_pid;
-	ktime_t it_real_incr;
-
-	/*
-	 * ITIMER_PROF and ITIMER_VIRTUAL timers for the process, we use
-	 * CPUCLOCK_PROF and CPUCLOCK_VIRT for indexing array as these
-	 * values are defined to 0 and 1 respectively
-	 */
-	struct cpu_itimer it[2];
-
-	/*
-	 * Thread group totals for process CPU timers.
-	 * See thread_group_cputimer(), et al, for details.
-	 */
-	struct thread_group_cputimer cputimer;
-
-	/* Earliest-expiration cache. */
-	struct task_cputime cputime_expires;
-
-	struct list_head cpu_timers[3];
-
-	struct pid *tty_old_pgrp;
-
-	/* boolean value for session group leader */
-	int leader;
-
-	struct tty_struct *tty; /* NULL if no tty */
-
-#ifdef CONFIG_SCHED_AUTOGROUP
-	struct autogroup *autogroup;
-#endif
-	/*
-	 * Cumulative resource counters for dead threads in the group,
-	 * and for reaped dead child processes forked by this group.
-	 * Live threads maintain their own counters and add to these
-	 * in __exit_signal, except for the group leader.
-	 */
-	cputime_t utime, stime, cutime, cstime;
-	cputime_t gtime;
-	cputime_t cgtime;
-#ifndef CONFIG_VIRT_CPU_ACCOUNTING
-	cputime_t prev_utime, prev_stime;
-#endif
-	unsigned long nvcsw, nivcsw, cnvcsw, cnivcsw;
-	unsigned long min_flt, maj_flt, cmin_flt, cmaj_flt;
-	unsigned long inblock, oublock, cinblock, coublock;
-	unsigned long maxrss, cmaxrss;
-	struct task_io_accounting ioac;
-
-	/*
-	 * Cumulative ns of schedule CPU time fo dead threads in the
-	 * group, not including a zombie group leader, (This only differs
-	 * from jiffies_to_ns(utime + stime) if sched_clock uses something
-	 * other than jiffies.)
-	 */
-	unsigned long long sum_sched_runtime;
-
-	/*
-	 * We don't bother to synchronize most readers of this at all,
-	 * because there is no reader checking a limit that actually needs
-	 * to get both rlim_cur and rlim_max atomically, and either one
-	 * alone is a single word that can safely be read normally.
-	 * getrlimit/setrlimit use task_lock(current->group_leader) to
-	 * protect this instead of the siglock, because they really
-	 * have no need to disable irqs.
-	 */
-	struct rlimit rlim[RLIM_NLIMITS];
-
-#ifdef CONFIG_BSD_PROCESS_ACCT
-	struct pacct_struct pacct;	/* per-process accounting information */
-#endif
-#ifdef CONFIG_TASKSTATS
-	struct taskstats *stats;
-#endif
-#ifdef CONFIG_AUDIT
-	unsigned audit_tty;
-	struct tty_audit_buf *tty_audit_buf;
-#endif
-#ifdef CONFIG_CGROUPS
-	/*
-	 * group_rwsem prevents new tasks from entering the threadgroup and
-	 * member tasks from exiting,a more specifically, setting of
-	 * PF_EXITING.  fork and exit paths are protected with this rwsem
-	 * using threadgroup_change_begin/end().  Users which require
-	 * threadgroup to remain stable should use threadgroup_[un]lock()
-	 * which also takes care of exec path.  Currently, cgroup is the
-	 * only user.
-	 */
-	struct rw_semaphore group_rwsem;
-#endif
-
-	int oom_adj;		/* OOM kill score adjustment (bit shift) */
-	int oom_score_adj;	/* OOM kill score adjustment */
-	int oom_score_adj_min;	/* OOM kill score adjustment minimum value.
-				 * Only settable by CAP_SYS_RESOURCE. */
-
-	struct mutex cred_guard_mutex;	/* guard against foreign influences on
-					 * credential calculations
-					 * (notably. ptrace) */
-};
-
-/* Context switch must be unlocked if interrupts are to be enabled */
-#ifdef __ARCH_WANT_INTERRUPTS_ON_CTXSW
-# define __ARCH_WANT_UNLOCKED_CTXSW
-#endif
-
-/*
- * Bits in flags field of signal_struct.
- */
-#define SIGNAL_STOP_STOPPED	0x00000001 /* job control stop in effect */
-#define SIGNAL_STOP_CONTINUED	0x00000002 /* SIGCONT since WCONTINUED reap */
-#define SIGNAL_GROUP_EXIT	0x00000004 /* group exit in progress */
-/*
- * Pending notifications to parent.
- */
-#define SIGNAL_CLD_STOPPED	0x00000010
-#define SIGNAL_CLD_CONTINUED	0x00000020
-#define SIGNAL_CLD_MASK		(SIGNAL_CLD_STOPPED|SIGNAL_CLD_CONTINUED)
-
-#define SIGNAL_UNKILLABLE	0x00000040 /* for init: ignore fatal signals */
-
-/* If true, all threads except ->group_exit_task have pending SIGKILL */
-static inline int signal_group_exit(const struct signal_struct *sig)
-{
-	return	(sig->flags & SIGNAL_GROUP_EXIT) ||
-		(sig->group_exit_task != NULL);
-}
-
-/*
- * Some day this will be a full-fledged user tracking system..
- */
-struct user_struct {
-	atomic_t __count;	/* reference count */
-	atomic_t processes;	/* How many processes does this user have? */
-	atomic_t files;		/* How many open files does this user have? */
-	atomic_t sigpending;	/* How many pending signals does this user have? */
-#ifdef CONFIG_INOTIFY_USER
-	atomic_t inotify_watches; /* How many inotify watches does this user have? */
-	atomic_t inotify_devs;	/* How many inotify devs does this user have opened? */
-#endif
-#ifdef CONFIG_FANOTIFY
-	atomic_t fanotify_listeners;
-#endif
-#ifdef CONFIG_EPOLL
-	atomic_long_t epoll_watches; /* The number of file descriptors currently watched */
-#endif
-#ifdef CONFIG_POSIX_MQUEUE
-	/* protected by mq_lock	*/
-	unsigned long mq_bytes;	/* How many bytes can be allocated to mqueue? */
-#endif
-	unsigned long locked_shm; /* How many pages of mlocked shm ? */
-
-#ifdef CONFIG_KEYS
-	struct key *uid_keyring;	/* UID specific keyring */
-	struct key *session_keyring;	/* UID's default session keyring */
-#endif
-
-	/* Hash table maintenance information */
-	struct hlist_node uidhash_node;
-	uid_t uid;
-	struct user_namespace *user_ns;
-
-#ifdef CONFIG_PERF_EVENTS
-	atomic_long_t locked_vm;
-#endif
-};
-
-extern int uids_sysfs_init(void);
-
-extern struct user_struct *find_user(uid_t);
-
-extern struct user_struct root_user;
-#define INIT_USER (&root_user)
-
-
-struct backing_dev_info;
-struct reclaim_state;
-
-#if defined(CONFIG_SCHEDSTATS) || defined(CONFIG_TASK_DELAY_ACCT)
-struct sched_info {
-	/* cumulative counters */
-	unsigned long pcount;	      /* # of times run on this cpu */
-	unsigned long long run_delay; /* time spent waiting on a runqueue */
-
-	/* timestamps */
-	unsigned long long last_arrival,/* when we last ran on a cpu */
-			   last_queued;	/* when we were last queued to run */
-};
-#endif /* defined(CONFIG_SCHEDSTATS) || defined(CONFIG_TASK_DELAY_ACCT) */
-
-#ifdef CONFIG_TASK_DELAY_ACCT
-struct task_delay_info {
-	spinlock_t	lock;
-	unsigned int	flags;	/* Private per-task flags */
-
-	/* For each stat XXX, add following, aligned appropriately
-	 *
-	 * struct timespec XXX_start, XXX_end;
-	 * u64 XXX_delay;
-	 * u32 XXX_count;
-	 *
-	 * Atomicity of updates to XXX_delay, XXX_count protected by
-	 * single lock above (split into XXX_lock if contention is an issue).
-	 */
-
-	/*
-	 * XXX_count is incremented on every XXX operation, the delay
-	 * associated with the operation is added to XXX_delay.
-	 * XXX_delay contains the accumulated delay time in nanoseconds.
-	 */
-	struct timespec blkio_start, blkio_end;	/* Shared by blkio, swapin */
-	u64 blkio_delay;	/* wait for sync block io completion */
-	u64 swapin_delay;	/* wait for swapin block io completion */
-	u32 blkio_count;	/* total count of the number of sync block */
-				/* io operations performed */
-	u32 swapin_count;	/* total count of the number of swapin block */
-				/* io operations performed */
-
-	struct timespec freepages_start, freepages_end;
-	u64 freepages_delay;	/* wait for memory reclaim */
-	u32 freepages_count;	/* total count of memory reclaim */
-};
-#endif	/* CONFIG_TASK_DELAY_ACCT */
-
-static inline int sched_info_on(void)
-{
-#ifdef CONFIG_SCHEDSTATS
-	return 1;
-#elif defined(CONFIG_TASK_DELAY_ACCT)
-	extern int delayacct_on;
-	return delayacct_on;
-#else
-	return 0;
-#endif
-}
-
-enum cpu_idle_type {
-	CPU_IDLE,
-	CPU_NOT_IDLE,
-	CPU_NEWLY_IDLE,
-	CPU_MAX_IDLE_TYPES
-};
-
-/*
- * Increase resolution of nice-level calculations for 64-bit architectures.
- * The extra resolution improves shares distribution and load balancing of
- * low-weight task groups (eg. nice +19 on an autogroup), deeper taskgroup
- * hierarchies, especially on larger systems. This is not a user-visible change
- * and does not change the user-interface for setting shares/weights.
- *
- * We increase resolution only if we have enough bits to allow this increased
- * resolution (i.e. BITS_PER_LONG > 32). The costs for increasing resolution
- * when BITS_PER_LONG <= 32 are pretty high and the returns do not justify the
- * increased costs.
- */
-#if 0 /* BITS_PER_LONG > 32 -- currently broken: it increases power usage under light load  */
-# define SCHED_LOAD_RESOLUTION	10
-# define scale_load(w)		((w) << SCHED_LOAD_RESOLUTION)
-# define scale_load_down(w)	((w) >> SCHED_LOAD_RESOLUTION)
-#else
-# define SCHED_LOAD_RESOLUTION	0
-# define scale_load(w)		(w)
-# define scale_load_down(w)	(w)
-#endif
-
-#define SCHED_LOAD_SHIFT	(10 + SCHED_LOAD_RESOLUTION)
-#define SCHED_LOAD_SCALE	(1L << SCHED_LOAD_SHIFT)
-
-/*
- * Increase resolution of cpu_power calculations
- */
-#define SCHED_POWER_SHIFT	10
-#define SCHED_POWER_SCALE	(1L << SCHED_POWER_SHIFT)
-
-/*
- * sched-domains (multiprocessor balancing) declarations:
- */
-#ifdef CONFIG_SMP
-#define SD_LOAD_BALANCE		0x0001	/* Do load balancing on this domain. */
-#define SD_BALANCE_NEWIDLE	0x0002	/* Balance when about to become idle */
-#define SD_BALANCE_EXEC		0x0004	/* Balance on exec */
-#define SD_BALANCE_FORK		0x0008	/* Balance on fork, clone */
-#define SD_BALANCE_WAKE		0x0010  /* Balance on wakeup */
-#define SD_WAKE_AFFINE		0x0020	/* Wake task to waking CPU */
-#define SD_PREFER_LOCAL		0x0040  /* Prefer to keep tasks local to this domain */
-#define SD_SHARE_CPUPOWER	0x0080	/* Domain members share cpu power */
-#define SD_POWERSAVINGS_BALANCE	0x0100	/* Balance for power savings */
-#define SD_SHARE_PKG_RESOURCES	0x0200	/* Domain members share cpu pkg resources */
-#define SD_SERIALIZE		0x0400	/* Only a single load balancing instance */
-#define SD_ASYM_PACKING		0x0800  /* Place busy groups earlier in the domain */
-#define SD_PREFER_SIBLING	0x1000	/* Prefer to place tasks in a sibling domain */
-#define SD_OVERLAP		0x2000	/* sched_domains of this level overlap */
-
-enum powersavings_balance_level {
-	POWERSAVINGS_BALANCE_NONE = 0,  /* No power saving load balance */
-	POWERSAVINGS_BALANCE_BASIC,	/* Fill one thread/core/package
-					 * first for long running threads
-					 */
-	POWERSAVINGS_BALANCE_WAKEUP,	/* Also bias task wakeups to semi-idle
-					 * cpu package for power savings
-					 */
-	MAX_POWERSAVINGS_BALANCE_LEVELS
-};
-
-extern int sched_mc_power_savings, sched_smt_power_savings;
-
-static inline int sd_balance_for_mc_power(void)
-{
-	if (sched_smt_power_savings)
-		return SD_POWERSAVINGS_BALANCE;
-
-	if (!sched_mc_power_savings)
-		return SD_PREFER_SIBLING;
-
-	return 0;
-}
-
-static inline int sd_balance_for_package_power(void)
-{
-	if (sched_mc_power_savings | sched_smt_power_savings)
-		return SD_POWERSAVINGS_BALANCE;
-
-	return SD_PREFER_SIBLING;
-}
-
-extern int __weak arch_sd_sibiling_asym_packing(void);
-
-/*
- * Optimise SD flags for power savings:
- * SD_BALANCE_NEWIDLE helps aggressive task consolidation and power savings.
- * Keep default SD flags if sched_{smt,mc}_power_saving=0
- */
-
-static inline int sd_power_saving_flags(void)
-{
-	if (sched_mc_power_savings | sched_smt_power_savings)
-		return SD_BALANCE_NEWIDLE;
-
-	return 0;
-}
-
-struct sched_group_power {
-	atomic_t ref;
-	/*
-	 * CPU power of this group, SCHED_LOAD_SCALE being max power for a
-	 * single CPU.
-	 */
-	unsigned int power, power_orig;
-	unsigned long next_update;
-	/*
-	 * Number of busy cpus in this group.
-	 */
-	atomic_t nr_busy_cpus;
-};
-
-struct sched_group {
-	struct sched_group *next;	/* Must be a circular list */
-	atomic_t ref;
-
-	unsigned int group_weight;
-	struct sched_group_power *sgp;
-
-	/*
-	 * The CPUs this group covers.
-	 *
-	 * NOTE: this field is variable length. (Allocated dynamically
-	 * by attaching extra space to the end of the structure,
-	 * depending on how many CPUs the kernel has booted up with)
-	 */
-	unsigned long cpumask[0];
-};
-
-static inline struct cpumask *sched_group_cpus(struct sched_group *sg)
-{
-	return to_cpumask(sg->cpumask);
-}
-
-/**
- * group_first_cpu - Returns the first cpu in the cpumask of a sched_group.
- * @group: The group whose first cpu is to be returned.
- */
-static inline unsigned int group_first_cpu(struct sched_group *group)
-{
-	return cpumask_first(sched_group_cpus(group));
-}
-
-struct sched_domain_attr {
-	int relax_domain_level;
-};
-
-#define SD_ATTR_INIT	(struct sched_domain_attr) {	\
-	.relax_domain_level = -1,			\
-}
-
-extern int sched_domain_level_max;
-
-struct sched_domain {
-	/* These fields must be setup */
-	struct sched_domain *parent;	/* top domain must be null terminated */
-	struct sched_domain *child;	/* bottom domain must be null terminated */
-	struct sched_group *groups;	/* the balancing groups of the domain */
-	unsigned long min_interval;	/* Minimum balance interval ms */
-	unsigned long max_interval;	/* Maximum balance interval ms */
-	unsigned int busy_factor;	/* less balancing by factor if busy */
-	unsigned int imbalance_pct;	/* No balance until over watermark */
-	unsigned int cache_nice_tries;	/* Leave cache hot tasks for # tries */
-	unsigned int busy_idx;
-	unsigned int idle_idx;
-	unsigned int newidle_idx;
-	unsigned int wake_idx;
-	unsigned int forkexec_idx;
-	unsigned int smt_gain;
-	int flags;			/* See SD_* */
-	int level;
-
-	/* Runtime fields. */
-	unsigned long last_balance;	/* init to jiffies. units in jiffies */
-	unsigned int balance_interval;	/* initialise to 1. units in ms. */
-	unsigned int nr_balance_failed; /* initialise to 0 */
-
-	u64 last_update;
-
-#ifdef CONFIG_SCHEDSTATS
-	/* load_balance() stats */
-	unsigned int lb_count[CPU_MAX_IDLE_TYPES];
-	unsigned int lb_failed[CPU_MAX_IDLE_TYPES];
-	unsigned int lb_balanced[CPU_MAX_IDLE_TYPES];
-	unsigned int lb_imbalance[CPU_MAX_IDLE_TYPES];
-	unsigned int lb_gained[CPU_MAX_IDLE_TYPES];
-	unsigned int lb_hot_gained[CPU_MAX_IDLE_TYPES];
-	unsigned int lb_nobusyg[CPU_MAX_IDLE_TYPES];
-	unsigned int lb_nobusyq[CPU_MAX_IDLE_TYPES];
-
-	/* Active load balancing */
-	unsigned int alb_count;
-	unsigned int alb_failed;
-	unsigned int alb_pushed;
-
-	/* SD_BALANCE_EXEC stats */
-	unsigned int sbe_count;
-	unsigned int sbe_balanced;
-	unsigned int sbe_pushed;
-
-	/* SD_BALANCE_FORK stats */
-	unsigned int sbf_count;
-	unsigned int sbf_balanced;
-	unsigned int sbf_pushed;
-
-	/* try_to_wake_up() stats */
-	unsigned int ttwu_wake_remote;
-	unsigned int ttwu_move_affine;
-	unsigned int ttwu_move_balance;
-#endif
-#ifdef CONFIG_SCHED_DEBUG
-	char *name;
-#endif
-	union {
-		void *private;		/* used during construction */
-		struct rcu_head rcu;	/* used during destruction */
-	};
-
-	unsigned int span_weight;
-	/*
-	 * Span of all CPUs in this domain.
-	 *
-	 * NOTE: this field is variable length. (Allocated dynamically
-	 * by attaching extra space to the end of the structure,
-	 * depending on how many CPUs the kernel has booted up with)
-	 */
-	unsigned long span[0];
-};
-
-static inline struct cpumask *sched_domain_span(struct sched_domain *sd)
-{
-	return to_cpumask(sd->span);
-}
-
-extern void partition_sched_domains(int ndoms_new, cpumask_var_t doms_new[],
-				    struct sched_domain_attr *dattr_new);
-
-/* Allocate an array of sched domains, for partition_sched_domains(). */
-cpumask_var_t *alloc_sched_domains(unsigned int ndoms);
-void free_sched_domains(cpumask_var_t doms[], unsigned int ndoms);
-
-/* Test a flag in parent sched domain */
-static inline int test_sd_parent(struct sched_domain *sd, int flag)
-{
-	if (sd->parent && (sd->parent->flags & flag))
-		return 1;
-
-	return 0;
-}
-
-unsigned long default_scale_freq_power(struct sched_domain *sd, int cpu);
-unsigned long default_scale_smt_power(struct sched_domain *sd, int cpu);
-
-bool cpus_share_cache(int this_cpu, int that_cpu);
-
-#else /* CONFIG_SMP */
-
-struct sched_domain_attr;
-
-static inline void
-partition_sched_domains(int ndoms_new, cpumask_var_t doms_new[],
-			struct sched_domain_attr *dattr_new)
-{
-}
-
-static inline bool cpus_share_cache(int this_cpu, int that_cpu)
-{
-	return true;
-}
-
-#endif	/* !CONFIG_SMP */
-
-
-struct io_context;			/* See blkdev.h */
-
-
-#ifdef ARCH_HAS_PREFETCH_SWITCH_STACK
-extern void prefetch_stack(struct task_struct *t);
-#else
-static inline void prefetch_stack(struct task_struct *t) { }
-#endif
-
-struct audit_context;		/* See audit.c */
-struct mempolicy;
-struct pipe_inode_info;
-struct uts_namespace;
-
-struct rq;
-struct sched_domain;
-
-/*
- * wake flags
- */
-#define WF_SYNC		0x01		/* waker goes to sleep after wakup */
-#define WF_FORK		0x02		/* child wakeup after fork */
-#define WF_MIGRATED	0x04		/* internal use, task got migrated */
-
-#define ENQUEUE_WAKEUP		1
-#define ENQUEUE_HEAD		2
-#ifdef CONFIG_SMP
-#define ENQUEUE_WAKING		4	/* sched_class::task_waking was called */
-#else
-#define ENQUEUE_WAKING		0
-#endif
-
-#define DEQUEUE_SLEEP		1
-
-struct sched_class {
-	const struct sched_class *next;
-
-	void (*enqueue_task) (struct rq *rq, struct task_struct *p, int flags);
-	void (*dequeue_task) (struct rq *rq, struct task_struct *p, int flags);
-	void (*yield_task) (struct rq *rq);
-	bool (*yield_to_task) (struct rq *rq, struct task_struct *p, bool preempt);
-
-	void (*check_preempt_curr) (struct rq *rq, struct task_struct *p, int flags);
-
-	struct task_struct * (*pick_next_task) (struct rq *rq);
-	void (*put_prev_task) (struct rq *rq, struct task_struct *p);
-
-#ifdef CONFIG_SMP
-	int  (*select_task_rq)(struct task_struct *p, int sd_flag, int flags);
-
-	void (*pre_schedule) (struct rq *this_rq, struct task_struct *task);
-	void (*post_schedule) (struct rq *this_rq);
-	void (*task_waking) (struct task_struct *task);
-	void (*task_woken) (struct rq *this_rq, struct task_struct *task);
-
-	void (*set_cpus_allowed)(struct task_struct *p,
-				 const struct cpumask *newmask);
-
-	void (*rq_online)(struct rq *rq);
-	void (*rq_offline)(struct rq *rq);
-#endif
-
-	void (*set_curr_task) (struct rq *rq);
-	void (*task_tick) (struct rq *rq, struct task_struct *p, int queued);
-	void (*task_fork) (struct task_struct *p);
-
-	void (*switched_from) (struct rq *this_rq, struct task_struct *task);
-	void (*switched_to) (struct rq *this_rq, struct task_struct *task);
-	void (*prio_changed) (struct rq *this_rq, struct task_struct *task,
-			     int oldprio);
-
-	unsigned int (*get_rr_interval) (struct rq *rq,
-					 struct task_struct *task);
-
-#ifdef CONFIG_FAIR_GROUP_SCHED
-	void (*task_move_group) (struct task_struct *p, int on_rq);
-#endif
-};
-
-struct load_weight {
-	unsigned long weight, inv_weight;
-};
-
-#ifdef CONFIG_SCHEDSTATS
-struct sched_statistics {
-	u64			wait_start;
-	u64			wait_max;
-	u64			wait_count;
-	u64			wait_sum;
-	u64			iowait_count;
-	u64			iowait_sum;
-
-	u64			sleep_start;
-	u64			sleep_max;
-	s64			sum_sleep_runtime;
-
-	u64			block_start;
-	u64			block_max;
-	u64			exec_max;
-	u64			slice_max;
-
-	u64			nr_migrations_cold;
-	u64			nr_failed_migrations_affine;
-	u64			nr_failed_migrations_running;
-	u64			nr_failed_migrations_hot;
-	u64			nr_forced_migrations;
-
-	u64			nr_wakeups;
-	u64			nr_wakeups_sync;
-	u64			nr_wakeups_migrate;
-	u64			nr_wakeups_local;
-	u64			nr_wakeups_remote;
-	u64			nr_wakeups_affine;
-	u64			nr_wakeups_affine_attempts;
-	u64			nr_wakeups_passive;
-	u64			nr_wakeups_idle;
-};
-#endif
-
-struct sched_entity {
-	struct load_weight	load;		/* for load-balancing */
-	struct rb_node		run_node;
-	struct list_head	group_node;
-	unsigned int		on_rq;
-
-	u64			exec_start;
-	u64			sum_exec_runtime;
-	u64			vruntime;
-	u64			prev_sum_exec_runtime;
-
-	u64			nr_migrations;
-
-#ifdef CONFIG_SCHEDSTATS
-	struct sched_statistics statistics;
-#endif
-
-#ifdef CONFIG_FAIR_GROUP_SCHED
-	struct sched_entity	*parent;
-	/* rq on which this entity is (to be) queued: */
-	struct cfs_rq		*cfs_rq;
-	/* rq "owned" by this entity/group: */
-	struct cfs_rq		*my_q;
-#endif
-};
-
-struct sched_rt_entity {
-	struct list_head run_list;
-	unsigned long timeout;
-	unsigned int time_slice;
-	int nr_cpus_allowed;
-
-	struct sched_rt_entity *back;
-#ifdef CONFIG_RT_GROUP_SCHED
-	struct sched_rt_entity	*parent;
-	/* rq on which this entity is (to be) queued: */
-	struct rt_rq		*rt_rq;
-	/* rq "owned" by this entity/group: */
-	struct rt_rq		*my_q;
-#endif
-};
-
-/*
- * default timeslice is 100 msecs (used only for SCHED_RR tasks).
- * Timeslices get refilled after they expire.
- */
-#define RR_TIMESLICE		(100 * HZ / 1000)
-
-struct rcu_node;
-
-enum perf_event_task_context {
-	perf_invalid_context = -1,
-	perf_hw_context = 0,
-	perf_sw_context,
-	perf_nr_task_contexts,
-};
-
-struct task_struct {
-	volatile long state;	/* -1 unrunnable, 0 runnable, >0 stopped */
-	void *stack;
-	atomic_t usage;
-	unsigned int flags;	/* per process flags, defined below */
-	unsigned int ptrace;
-
-#ifdef CONFIG_SMP
-	struct llist_node wake_entry;
-	int on_cpu;
-#endif
-	int on_rq;
-
-	int prio, static_prio, normal_prio;
-	unsigned int rt_priority;
-	const struct sched_class *sched_class;
-	struct sched_entity se;
-	struct sched_rt_entity rt;
-
-#ifdef CONFIG_PREEMPT_NOTIFIERS
-	/* list of struct preempt_notifier: */
-	struct hlist_head preempt_notifiers;
-#endif
-
-	/*
-	 * fpu_counter contains the number of consecutive context switches
-	 * that the FPU is used. If this is over a threshold, the lazy fpu
-	 * saving becomes unlazy to save the trap. This is an unsigned char
-	 * so that after 256 times the counter wraps and the behavior turns
-	 * lazy again; this to deal with bursty apps that only use FPU for
-	 * a short time
-	 */
-	unsigned char fpu_counter;
-#ifdef CONFIG_BLK_DEV_IO_TRACE
-	unsigned int btrace_seq;
-#endif
-
-	unsigned int policy;
-	cpumask_t cpus_allowed;
-
-#ifdef CONFIG_PREEMPT_RCU
-	int rcu_read_lock_nesting;
-	char rcu_read_unlock_special;
-	struct list_head rcu_node_entry;
-#endif /* #ifdef CONFIG_PREEMPT_RCU */
-#ifdef CONFIG_TREE_PREEMPT_RCU
-	struct rcu_node *rcu_blocked_node;
-#endif /* #ifdef CONFIG_TREE_PREEMPT_RCU */
-#ifdef CONFIG_RCU_BOOST
-	struct rt_mutex *rcu_boost_mutex;
-#endif /* #ifdef CONFIG_RCU_BOOST */
-
-#if defined(CONFIG_SCHEDSTATS) || defined(CONFIG_TASK_DELAY_ACCT)
-	struct sched_info sched_info;
-#endif
-
-	struct list_head tasks;
-#ifdef CONFIG_SMP
-	struct plist_node pushable_tasks;
-#endif
-
-	struct mm_struct *mm, *active_mm;
-#ifdef CONFIG_COMPAT_BRK
-	unsigned brk_randomized:1;
-#endif
-#if defined(SPLIT_RSS_COUNTING)
-	struct task_rss_stat	rss_stat;
-#endif
-/* task state */
-	int exit_state;
-	int exit_code, exit_signal;
-	int pdeath_signal;  /*  The signal sent when the parent dies  */
-	unsigned int jobctl;	/* JOBCTL_*, siglock protected */
-	/* ??? */
-	unsigned int personality;
-	unsigned did_exec:1;
-	unsigned in_execve:1;	/* Tell the LSMs that the process is doing an
-				 * execve */
-	unsigned in_iowait:1;
-
-
-	/* Revert to default priority/policy when forking */
-	unsigned sched_reset_on_fork:1;
-	unsigned sched_contributes_to_load:1;
-
-#ifdef CONFIG_GENERIC_HARDIRQS
-	/* IRQ handler threads */
-	unsigned irq_thread:1;
-#endif
-
-	pid_t pid;
-	pid_t tgid;
-
-#ifdef CONFIG_CC_STACKPROTECTOR
-	/* Canary value for the -fstack-protector gcc feature */
-	unsigned long stack_canary;
-#endif
-
-	/* 
-	 * pointers to (original) parent process, youngest child, younger sibling,
-	 * older sibling, respectively.  (p->father can be replaced with 
-	 * p->real_parent->pid)
-	 */
-	struct task_struct __rcu *real_parent; /* real parent process */
-	struct task_struct __rcu *parent; /* recipient of SIGCHLD, wait4() reports */
-	/*
-	 * children/sibling forms the list of my natural children
-	 */
-	struct list_head children;	/* list of my children */
-	struct list_head sibling;	/* linkage in my parent's children list */
-	struct task_struct *group_leader;	/* threadgroup leader */
-
-	/*
-	 * ptraced is the list of tasks this task is using ptrace on.
-	 * This includes both natural children and PTRACE_ATTACH targets.
-	 * p->ptrace_entry is p's link on the p->parent->ptraced list.
-	 */
-	struct list_head ptraced;
-	struct list_head ptrace_entry;
-
-	/* PID/PID hash table linkage. */
-	struct pid_link pids[PIDTYPE_MAX];
-	struct list_head thread_group;
-
-	struct completion *vfork_done;		/* for vfork() */
-	int __user *set_child_tid;		/* CLONE_CHILD_SETTID */
-	int __user *clear_child_tid;		/* CLONE_CHILD_CLEARTID */
-
-	cputime_t utime, stime, utimescaled, stimescaled;
-	cputime_t gtime;
-#ifndef CONFIG_VIRT_CPU_ACCOUNTING
-	cputime_t prev_utime, prev_stime;
-#endif
-	unsigned long nvcsw, nivcsw; /* context switch counts */
-	struct timespec start_time; 		/* monotonic time */
-	struct timespec real_start_time;	/* boot based time */
-/* mm fault and swap info: this can arguably be seen as either mm-specific or thread-specific */
-	unsigned long min_flt, maj_flt;
-
-	struct task_cputime cputime_expires;
-	struct list_head cpu_timers[3];
-
-/* process credentials */
-	const struct cred __rcu *real_cred; /* objective and real subjective task
-					 * credentials (COW) */
-	const struct cred __rcu *cred;	/* effective (overridable) subjective task
-					 * credentials (COW) */
-	struct cred *replacement_session_keyring; /* for KEYCTL_SESSION_TO_PARENT */
-
-	char comm[TASK_COMM_LEN]; /* executable name excluding path
-				     - access with [gs]et_task_comm (which lock
-				       it with task_lock())
-				     - initialized normally by setup_new_exec */
-/* file system info */
-	int link_count, total_link_count;
-#ifdef CONFIG_SYSVIPC
-/* ipc stuff */
-	struct sysv_sem sysvsem;
-#endif
-#ifdef CONFIG_DETECT_HUNG_TASK
-/* hung task detection */
-	unsigned long last_switch_count;
-#endif
-/* CPU-specific state of this task */
-	struct thread_struct thread;
-/* filesystem information */
-	struct fs_struct *fs;
-/* open file information */
-	struct files_struct *files;
-/* namespaces */
-	struct nsproxy *nsproxy;
-/* signal handlers */
-	struct signal_struct *signal;
-	struct sighand_struct *sighand;
-
-	sigset_t blocked, real_blocked;
-	sigset_t saved_sigmask;	/* restored if set_restore_sigmask() was used */
-	struct sigpending pending;
-
-	unsigned long sas_ss_sp;
-	size_t sas_ss_size;
-	int (*notifier)(void *priv);
-	void *notifier_data;
-	sigset_t *notifier_mask;
-	struct audit_context *audit_context;
-#ifdef CONFIG_AUDITSYSCALL
-	uid_t loginuid;
-	unsigned int sessionid;
-#endif
-	seccomp_t seccomp;
-
-/* Thread group tracking */
-   	u32 parent_exec_id;
-   	u32 self_exec_id;
-/* Protection of (de-)allocation: mm, files, fs, tty, keyrings, mems_allowed,
- * mempolicy */
-	spinlock_t alloc_lock;
-
-	/* Protection of the PI data structures: */
-	raw_spinlock_t pi_lock;
-
-#ifdef CONFIG_RT_MUTEXES
-	/* PI waiters blocked on a rt_mutex held by this task */
-	struct plist_head pi_waiters;
-	/* Deadlock detection and priority inheritance handling */
-	struct rt_mutex_waiter *pi_blocked_on;
-#endif
-
-#ifdef CONFIG_DEBUG_MUTEXES
-	/* mutex deadlock detection */
-	struct mutex_waiter *blocked_on;
-#endif
-#ifdef CONFIG_TRACE_IRQFLAGS
-	unsigned int irq_events;
-	unsigned long hardirq_enable_ip;
-	unsigned long hardirq_disable_ip;
-	unsigned int hardirq_enable_event;
-	unsigned int hardirq_disable_event;
-	int hardirqs_enabled;
-	int hardirq_context;
-	unsigned long softirq_disable_ip;
-	unsigned long softirq_enable_ip;
-	unsigned int softirq_disable_event;
-	unsigned int softirq_enable_event;
-	int softirqs_enabled;
-	int softirq_context;
-#endif
-#ifdef CONFIG_LOCKDEP
-# define MAX_LOCK_DEPTH 48UL
-	u64 curr_chain_key;
-	int lockdep_depth;
-	unsigned int lockdep_recursion;
-	struct held_lock held_locks[MAX_LOCK_DEPTH];
-	gfp_t lockdep_reclaim_gfp;
-#endif
-
-/* journalling filesystem info */
-	void *journal_info;
-
-/* stacked block device info */
-	struct bio_list *bio_list;
-
-#ifdef CONFIG_BLOCK
-/* stack plugging */
-	struct blk_plug *plug;
-#endif
-
-/* VM state */
-	struct reclaim_state *reclaim_state;
-
-	struct backing_dev_info *backing_dev_info;
-
-	struct io_context *io_context;
-
-	unsigned long ptrace_message;
-	siginfo_t *last_siginfo; /* For ptrace use.  */
-	struct task_io_accounting ioac;
-#if defined(CONFIG_TASK_XACCT)
-	u64 acct_rss_mem1;	/* accumulated rss usage */
-	u64 acct_vm_mem1;	/* accumulated virtual memory usage */
-	cputime_t acct_timexpd;	/* stime + utime since last update */
-#endif
-#ifdef CONFIG_CPUSETS
-	nodemask_t mems_allowed;	/* Protected by alloc_lock */
-	seqcount_t mems_allowed_seq;	/* Seqence no to catch updates */
-	int cpuset_mem_spread_rotor;
-	int cpuset_slab_spread_rotor;
-#endif
-#ifdef CONFIG_CGROUPS
-	/* Control Group info protected by css_set_lock */
-	struct css_set __rcu *cgroups;
-	/* cg_list protected by css_set_lock and tsk->alloc_lock */
-	struct list_head cg_list;
-#endif
-#ifdef CONFIG_FUTEX
-	struct robust_list_head __user *robust_list;
-#ifdef CONFIG_COMPAT
-	struct compat_robust_list_head __user *compat_robust_list;
-#endif
-	struct list_head pi_state_list;
-	struct futex_pi_state *pi_state_cache;
-#endif
-#ifdef CONFIG_PERF_EVENTS
-	struct perf_event_context *perf_event_ctxp[perf_nr_task_contexts];
-	struct mutex perf_event_mutex;
-	struct list_head perf_event_list;
-#endif
-#ifdef CONFIG_NUMA
-	struct mempolicy *mempolicy;	/* Protected by alloc_lock */
-	short il_next;
-	short pref_node_fork;
-#endif
-	struct rcu_head rcu;
-
-	/*
-	 * cache last used pipe for splice
-	 */
-	struct pipe_inode_info *splice_pipe;
-#ifdef	CONFIG_TASK_DELAY_ACCT
-	struct task_delay_info *delays;
-#endif
-#ifdef CONFIG_FAULT_INJECTION
-	int make_it_fail;
-#endif
-	/*
-	 * when (nr_dirtied >= nr_dirtied_pause), it's time to call
-	 * balance_dirty_pages() for some dirty throttling pause
-	 */
-	int nr_dirtied;
-	int nr_dirtied_pause;
-	unsigned long dirty_paused_when; /* start of a write-and-pause period */
-
-#ifdef CONFIG_LATENCYTOP
-	int latency_record_count;
-	struct latency_record latency_record[LT_SAVECOUNT];
-#endif
-	/*
-	 * time slack values; these are used to round up poll() and
-	 * select() etc timeout values. These are in nanoseconds.
-	 */
-	unsigned long timer_slack_ns;
-	unsigned long default_timer_slack_ns;
-
-	struct list_head	*scm_work_list;
-#ifdef CONFIG_FUNCTION_GRAPH_TRACER
-	/* Index of current stored address in ret_stack */
-	int curr_ret_stack;
-	/* Stack of return addresses for return function tracing */
-	struct ftrace_ret_stack	*ret_stack;
-	/* time stamp for last schedule */
-	unsigned long long ftrace_timestamp;
-	/*
-	 * Number of functions that haven't been traced
-	 * because of depth overrun.
-	 */
-	atomic_t trace_overrun;
-	/* Pause for the tracing */
-	atomic_t tracing_graph_pause;
-#endif
-#ifdef CONFIG_TRACING
-	/* state flags for use by tracers */
-	unsigned long trace;
-	/* bitmask and counter of trace recursion */
-	unsigned long trace_recursion;
-#endif /* CONFIG_TRACING */
-#ifdef CONFIG_CGROUP_MEM_RES_CTLR /* memcg uses this to do batch job */
-	struct memcg_batch_info {
-		int do_batch;	/* incremented when batch uncharge started */
-		struct mem_cgroup *memcg; /* target memcg of uncharge */
-		unsigned long nr_pages;	/* uncharged usage */
-		unsigned long memsw_nr_pages; /* uncharged mem+swap usage */
-	} memcg_batch;
-#endif
-#ifdef CONFIG_HAVE_HW_BREAKPOINT
-	atomic_t ptrace_bp_refcnt;
-#endif
-};
-
-/* Future-safe accessor for struct task_struct's cpus_allowed. */
-#define tsk_cpus_allowed(tsk) (&(tsk)->cpus_allowed)
-
-/*
- * Priority of a process goes from 0..MAX_PRIO-1, valid RT
- * priority is 0..MAX_RT_PRIO-1, and SCHED_NORMAL/SCHED_BATCH
- * tasks are in the range MAX_RT_PRIO..MAX_PRIO-1. Priority
- * values are inverted: lower p->prio value means higher priority.
- *
- * The MAX_USER_RT_PRIO value allows the actual maximum
- * RT priority to be separate from the value exported to
- * user-space.  This allows kernel threads to set their
- * priority to a value higher than any user task. Note:
- * MAX_RT_PRIO must not be smaller than MAX_USER_RT_PRIO.
- */
-
-#define MAX_USER_RT_PRIO	100
-#define MAX_RT_PRIO		MAX_USER_RT_PRIO
-
-#define MAX_PRIO		(MAX_RT_PRIO + 40)
-#define DEFAULT_PRIO		(MAX_RT_PRIO + 20)
-
-static inline int rt_prio(int prio)
-{
-	if (unlikely(prio < MAX_RT_PRIO))
-		return 1;
-	return 0;
-}
-
-static inline int rt_task(struct task_struct *p)
-{
-	return rt_prio(p->prio);
-}
-
-static inline struct pid *task_pid(struct task_struct *task)
-{
-	return task->pids[PIDTYPE_PID].pid;
-}
-
-static inline struct pid *task_tgid(struct task_struct *task)
-{
-	return task->group_leader->pids[PIDTYPE_PID].pid;
-}
-
-/*
- * Without tasklist or rcu lock it is not safe to dereference
- * the result of task_pgrp/task_session even if task == current,
- * we can race with another thread doing sys_setsid/sys_setpgid.
- */
-static inline struct pid *task_pgrp(struct task_struct *task)
-{
-	return task->group_leader->pids[PIDTYPE_PGID].pid;
-}
-
-static inline struct pid *task_session(struct task_struct *task)
-{
-	return task->group_leader->pids[PIDTYPE_SID].pid;
-}
-
-struct pid_namespace;
-
-/*
- * the helpers to get the task's different pids as they are seen
- * from various namespaces
- *
- * task_xid_nr()     : global id, i.e. the id seen from the init namespace;
- * task_xid_vnr()    : virtual id, i.e. the id seen from the pid namespace of
- *                     current.
- * task_xid_nr_ns()  : id seen from the ns specified;
- *
- * set_task_vxid()   : assigns a virtual id to a task;
- *
- * see also pid_nr() etc in include/linux/pid.h
- */
-pid_t __task_pid_nr_ns(struct task_struct *task, enum pid_type type,
-			struct pid_namespace *ns);
-
-static inline pid_t task_pid_nr(struct task_struct *tsk)
-{
-	return tsk->pid;
-}
-
-static inline pid_t task_pid_nr_ns(struct task_struct *tsk,
-					struct pid_namespace *ns)
-{
-	return __task_pid_nr_ns(tsk, PIDTYPE_PID, ns);
-}
-
-static inline pid_t task_pid_vnr(struct task_struct *tsk)
-{
-	return __task_pid_nr_ns(tsk, PIDTYPE_PID, NULL);
-}
-
-
-static inline pid_t task_tgid_nr(struct task_struct *tsk)
-{
-	return tsk->tgid;
-}
-
-pid_t task_tgid_nr_ns(struct task_struct *tsk, struct pid_namespace *ns);
-
-static inline pid_t task_tgid_vnr(struct task_struct *tsk)
-{
-	return pid_vnr(task_tgid(tsk));
-}
-
-
-static inline pid_t task_pgrp_nr_ns(struct task_struct *tsk,
-					struct pid_namespace *ns)
-{
-	return __task_pid_nr_ns(tsk, PIDTYPE_PGID, ns);
-}
-
-static inline pid_t task_pgrp_vnr(struct task_struct *tsk)
-{
-	return __task_pid_nr_ns(tsk, PIDTYPE_PGID, NULL);
-}
-
-
-static inline pid_t task_session_nr_ns(struct task_struct *tsk,
-					struct pid_namespace *ns)
-{
-	return __task_pid_nr_ns(tsk, PIDTYPE_SID, ns);
-}
-
-static inline pid_t task_session_vnr(struct task_struct *tsk)
-{
-	return __task_pid_nr_ns(tsk, PIDTYPE_SID, NULL);
-}
-
-/* obsolete, do not use */
-static inline pid_t task_pgrp_nr(struct task_struct *tsk)
-{
-	return task_pgrp_nr_ns(tsk, &init_pid_ns);
-}
-
-/**
- * pid_alive - check that a task structure is not stale
- * @p: Task structure to be checked.
- *
- * Test if a process is not yet dead (at most zombie state)
- * If pid_alive fails, then pointers within the task structure
- * can be stale and must not be dereferenced.
- */
-static inline int pid_alive(struct task_struct *p)
-{
-	return p->pids[PIDTYPE_PID].pid != NULL;
-}
-
-/**
- * is_global_init - check if a task structure is init
- * @tsk: Task structure to be checked.
- *
- * Check if a task structure is the first user space task the kernel created.
- */
-static inline int is_global_init(struct task_struct *tsk)
-{
-	return tsk->pid == 1;
-}
-
-/*
- * is_container_init:
- * check whether in the task is init in its own pid namespace.
- */
-extern int is_container_init(struct task_struct *tsk);
-
-extern struct pid *cad_pid;
-
-extern void free_task(struct task_struct *tsk);
-#define get_task_struct(tsk) do { atomic_inc(&(tsk)->usage); } while(0)
-
-extern void __put_task_struct(struct task_struct *t);
-
-static inline void put_task_struct(struct task_struct *t)
-{
-	if (atomic_dec_and_test(&t->usage))
-		__put_task_struct(t);
-}
-
-extern void task_times(struct task_struct *p, cputime_t *ut, cputime_t *st);
-extern void thread_group_times(struct task_struct *p, cputime_t *ut, cputime_t *st);
-
-extern int task_free_register(struct notifier_block *n);
-extern int task_free_unregister(struct notifier_block *n);
-
-/*
- * Per process flags
- */
-#define PF_EXITING	0x00000004	/* getting shut down */
-#define PF_EXITPIDONE	0x00000008	/* pi exit done on shut down */
-#define PF_VCPU		0x00000010	/* I'm a virtual CPU */
-#define PF_WQ_WORKER	0x00000020	/* I'm a workqueue worker */
-#define PF_FORKNOEXEC	0x00000040	/* forked but didn't exec */
-#define PF_MCE_PROCESS  0x00000080      /* process policy on mce errors */
-#define PF_SUPERPRIV	0x00000100	/* used super-user privileges */
-#define PF_DUMPCORE	0x00000200	/* dumped core */
-#define PF_SIGNALED	0x00000400	/* killed by a signal */
-#define PF_MEMALLOC	0x00000800	/* Allocating memory */
-#define PF_NPROC_EXCEEDED 0x00001000	/* set_user noticed that RLIMIT_NPROC was exceeded */
-#define PF_USED_MATH	0x00002000	/* if unset the fpu must be initialized before use */
-#define PF_NOFREEZE	0x00008000	/* this thread should not be frozen */
-#define PF_FROZEN	0x00010000	/* frozen for system suspend */
-#define PF_FSTRANS	0x00020000	/* inside a filesystem transaction */
-#define PF_KSWAPD	0x00040000	/* I am kswapd */
-#define PF_LESS_THROTTLE 0x00100000	/* Throttle me less: I clean memory */
-#define PF_KTHREAD	0x00200000	/* I am a kernel thread */
-#define PF_RANDOMIZE	0x00400000	/* randomize virtual address space */
-#define PF_SWAPWRITE	0x00800000	/* Allowed to write to swap */
-#define PF_SPREAD_PAGE	0x01000000	/* Spread page cache over cpuset */
-#define PF_SPREAD_SLAB	0x02000000	/* Spread some slab caches over cpuset */
-#define PF_THREAD_BOUND	0x04000000	/* Thread bound to specific cpu */
-#define PF_MCE_EARLY    0x08000000      /* Early kill for mce process policy */
-#define PF_MEMPOLICY	0x10000000	/* Non-default NUMA mempolicy */
-#define PF_MUTEX_TESTER	0x20000000	/* Thread belongs to the rt mutex tester */
-#define PF_FREEZER_SKIP	0x40000000	/* Freezer should not count it as freezable */
-
-/*
- * Only the _current_ task can read/write to tsk->flags, but other
- * tasks can access tsk->flags in readonly mode for example
- * with tsk_used_math (like during threaded core dumping).
- * There is however an exception to this rule during ptrace
- * or during fork: the ptracer task is allowed to write to the
- * child->flags of its traced child (same goes for fork, the parent
- * can write to the child->flags), because we're guaranteed the
- * child is not running and in turn not changing child->flags
- * at the same time the parent does it.
- */
-#define clear_stopped_child_used_math(child) do { (child)->flags &= ~PF_USED_MATH; } while (0)
-#define set_stopped_child_used_math(child) do { (child)->flags |= PF_USED_MATH; } while (0)
-#define clear_used_math() clear_stopped_child_used_math(current)
-#define set_used_math() set_stopped_child_used_math(current)
-#define conditional_stopped_child_used_math(condition, child) \
-	do { (child)->flags &= ~PF_USED_MATH, (child)->flags |= (condition) ? PF_USED_MATH : 0; } while (0)
-#define conditional_used_math(condition) \
-	conditional_stopped_child_used_math(condition, current)
-#define copy_to_stopped_child_used_math(child) \
-	do { (child)->flags &= ~PF_USED_MATH, (child)->flags |= current->flags & PF_USED_MATH; } while (0)
-/* NOTE: this will return 0 or PF_USED_MATH, it will never return 1 */
-#define tsk_used_math(p) ((p)->flags & PF_USED_MATH)
-#define used_math() tsk_used_math(current)
-
-/*
- * task->jobctl flags
- */
-#define JOBCTL_STOP_SIGMASK	0xffff	/* signr of the last group stop */
-
-#define JOBCTL_STOP_DEQUEUED_BIT 16	/* stop signal dequeued */
-#define JOBCTL_STOP_PENDING_BIT	17	/* task should stop for group stop */
-#define JOBCTL_STOP_CONSUME_BIT	18	/* consume group stop count */
-#define JOBCTL_TRAP_STOP_BIT	19	/* trap for STOP */
-#define JOBCTL_TRAP_NOTIFY_BIT	20	/* trap for NOTIFY */
-#define JOBCTL_TRAPPING_BIT	21	/* switching to TRACED */
-#define JOBCTL_LISTENING_BIT	22	/* ptracer is listening for events */
-
-#define JOBCTL_STOP_DEQUEUED	(1 << JOBCTL_STOP_DEQUEUED_BIT)
-#define JOBCTL_STOP_PENDING	(1 << JOBCTL_STOP_PENDING_BIT)
-#define JOBCTL_STOP_CONSUME	(1 << JOBCTL_STOP_CONSUME_BIT)
-#define JOBCTL_TRAP_STOP	(1 << JOBCTL_TRAP_STOP_BIT)
-#define JOBCTL_TRAP_NOTIFY	(1 << JOBCTL_TRAP_NOTIFY_BIT)
-#define JOBCTL_TRAPPING		(1 << JOBCTL_TRAPPING_BIT)
-#define JOBCTL_LISTENING	(1 << JOBCTL_LISTENING_BIT)
-
-#define JOBCTL_TRAP_MASK	(JOBCTL_TRAP_STOP | JOBCTL_TRAP_NOTIFY)
-#define JOBCTL_PENDING_MASK	(JOBCTL_STOP_PENDING | JOBCTL_TRAP_MASK)
-
-extern bool task_set_jobctl_pending(struct task_struct *task,
-				    unsigned int mask);
-extern void task_clear_jobctl_trapping(struct task_struct *task);
-extern void task_clear_jobctl_pending(struct task_struct *task,
-				      unsigned int mask);
-
-#ifdef CONFIG_PREEMPT_RCU
-
-#define RCU_READ_UNLOCK_BLOCKED (1 << 0) /* blocked while in RCU read-side. */
-#define RCU_READ_UNLOCK_NEED_QS (1 << 1) /* RCU core needs CPU response. */
-
-static inline void rcu_copy_process(struct task_struct *p)
-{
-	p->rcu_read_lock_nesting = 0;
-	p->rcu_read_unlock_special = 0;
-#ifdef CONFIG_TREE_PREEMPT_RCU
-	p->rcu_blocked_node = NULL;
-#endif /* #ifdef CONFIG_TREE_PREEMPT_RCU */
-#ifdef CONFIG_RCU_BOOST
-	p->rcu_boost_mutex = NULL;
-#endif /* #ifdef CONFIG_RCU_BOOST */
-	INIT_LIST_HEAD(&p->rcu_node_entry);
-}
-
-#else
-
-static inline void rcu_copy_process(struct task_struct *p)
-{
-}
-
-#endif
-
-#ifdef CONFIG_SMP
-extern void do_set_cpus_allowed(struct task_struct *p,
-			       const struct cpumask *new_mask);
-
-extern int set_cpus_allowed_ptr(struct task_struct *p,
-				const struct cpumask *new_mask);
-#else
-static inline void do_set_cpus_allowed(struct task_struct *p,
-				      const struct cpumask *new_mask)
-{
-}
-static inline int set_cpus_allowed_ptr(struct task_struct *p,
-				       const struct cpumask *new_mask)
-{
-	if (!cpumask_test_cpu(0, new_mask))
-		return -EINVAL;
-	return 0;
-}
-#endif
-
-#ifndef CONFIG_CPUMASK_OFFSTACK
-static inline int set_cpus_allowed(struct task_struct *p, cpumask_t new_mask)
-{
-	return set_cpus_allowed_ptr(p, &new_mask);
-}
-#endif
-
-/*
- * Do not use outside of architecture code which knows its limitations.
- *
- * sched_clock() has no promise of monotonicity or bounded drift between
- * CPUs, use (which you should not) requires disabling IRQs.
- *
- * Please use one of the three interfaces below.
- */
-extern unsigned long long notrace sched_clock(void);
-/*
- * See the comment in kernel/sched_clock.c
- */
-extern u64 cpu_clock(int cpu);
-extern u64 local_clock(void);
-extern u64 sched_clock_cpu(int cpu);
-
-
-extern void sched_clock_init(void);
-
-#ifndef CONFIG_HAVE_UNSTABLE_SCHED_CLOCK
-static inline void sched_clock_tick(void)
-{
-}
-
-static inline void sched_clock_idle_sleep_event(void)
-{
-}
-
-static inline void sched_clock_idle_wakeup_event(u64 delta_ns)
-{
-}
-#else
-/*
- * Architectures can set this to 1 if they have specified
- * CONFIG_HAVE_UNSTABLE_SCHED_CLOCK in their arch Kconfig,
- * but then during bootup it turns out that sched_clock()
- * is reliable after all:
- */
-extern int sched_clock_stable;
-
-extern void sched_clock_tick(void);
-extern void sched_clock_idle_sleep_event(void);
-extern void sched_clock_idle_wakeup_event(u64 delta_ns);
-#endif
-
-#ifdef CONFIG_IRQ_TIME_ACCOUNTING
-/*
- * An i/f to runtime opt-in for irq time accounting based off of sched_clock.
- * The reason for this explicit opt-in is not to have perf penalty with
- * slow sched_clocks.
- */
-extern void enable_sched_clock_irqtime(void);
-extern void disable_sched_clock_irqtime(void);
-#else
-static inline void enable_sched_clock_irqtime(void) {}
-static inline void disable_sched_clock_irqtime(void) {}
-#endif
-
-extern unsigned long long
-task_sched_runtime(struct task_struct *task);
-
-/* sched_exec is called by processes performing an exec */
-#ifdef CONFIG_SMP
-extern void sched_exec(void);
-#else
-#define sched_exec()   {}
-#endif
-
-extern void sched_clock_idle_sleep_event(void);
-extern void sched_clock_idle_wakeup_event(u64 delta_ns);
-
-#ifdef CONFIG_HOTPLUG_CPU
-extern void idle_task_exit(void);
-#else
-static inline void idle_task_exit(void) {}
-#endif
-
-#if defined(CONFIG_NO_HZ) && defined(CONFIG_SMP)
-extern void wake_up_idle_cpu(int cpu);
-#else
-static inline void wake_up_idle_cpu(int cpu) { }
-#endif
-
-extern unsigned int sysctl_sched_latency;
-extern unsigned int sysctl_sched_min_granularity;
-extern unsigned int sysctl_sched_wakeup_granularity;
-extern unsigned int sysctl_sched_child_runs_first;
-
-enum sched_tunable_scaling {
-	SCHED_TUNABLESCALING_NONE,
-	SCHED_TUNABLESCALING_LOG,
-	SCHED_TUNABLESCALING_LINEAR,
-	SCHED_TUNABLESCALING_END,
-};
-extern enum sched_tunable_scaling sysctl_sched_tunable_scaling;
-
-#ifdef CONFIG_SCHED_DEBUG
-extern unsigned int sysctl_sched_migration_cost;
-extern unsigned int sysctl_sched_nr_migrate;
-extern unsigned int sysctl_sched_time_avg;
-extern unsigned int sysctl_timer_migration;
-extern unsigned int sysctl_sched_shares_window;
-
-int sched_proc_update_handler(struct ctl_table *table, int write,
-		void __user *buffer, size_t *length,
-		loff_t *ppos);
-#endif
-#ifdef CONFIG_SCHED_DEBUG
-static inline unsigned int get_sysctl_timer_migration(void)
-{
-	return sysctl_timer_migration;
-}
-#else
-static inline unsigned int get_sysctl_timer_migration(void)
-{
-	return 1;
-}
-#endif
-extern unsigned int sysctl_sched_rt_period;
-extern int sysctl_sched_rt_runtime;
-
-int sched_rt_handler(struct ctl_table *table, int write,
-		void __user *buffer, size_t *lenp,
-		loff_t *ppos);
-
-#ifdef CONFIG_SCHED_AUTOGROUP
-extern unsigned int sysctl_sched_autogroup_enabled;
-
-extern void sched_autogroup_create_attach(struct task_struct *p);
-extern void sched_autogroup_detach(struct task_struct *p);
-extern void sched_autogroup_fork(struct signal_struct *sig);
-extern void sched_autogroup_exit(struct signal_struct *sig);
-#ifdef CONFIG_PROC_FS
-extern void proc_sched_autogroup_show_task(struct task_struct *p, struct seq_file *m);
-extern int proc_sched_autogroup_set_nice(struct task_struct *p, int nice);
-#endif
-#else
-static inline void sched_autogroup_create_attach(struct task_struct *p) { }
-static inline void sched_autogroup_detach(struct task_struct *p) { }
-static inline void sched_autogroup_fork(struct signal_struct *sig) { }
-static inline void sched_autogroup_exit(struct signal_struct *sig) { }
-#endif
-
-#ifdef CONFIG_CFS_BANDWIDTH
-extern unsigned int sysctl_sched_cfs_bandwidth_slice;
-#endif
-
-#ifdef CONFIG_RT_MUTEXES
-extern int rt_mutex_getprio(struct task_struct *p);
-extern void rt_mutex_setprio(struct task_struct *p, int prio);
-extern void rt_mutex_adjust_pi(struct task_struct *p);
-static inline bool tsk_is_pi_blocked(struct task_struct *tsk)
-{
-	return tsk->pi_blocked_on != NULL;
-}
-#else
-static inline int rt_mutex_getprio(struct task_struct *p)
-{
-	return p->normal_prio;
-}
-# define rt_mutex_adjust_pi(p)		do { } while (0)
-static inline bool tsk_is_pi_blocked(struct task_struct *tsk)
-{
-	return false;
-}
-#endif
-
-extern bool yield_to(struct task_struct *p, bool preempt);
-extern void set_user_nice(struct task_struct *p, long nice);
-extern int task_prio(const struct task_struct *p);
-extern int task_nice(const struct task_struct *p);
-extern int can_nice(const struct task_struct *p, const int nice);
-extern int task_curr(const struct task_struct *p);
-extern int idle_cpu(int cpu);
-extern int sched_setscheduler(struct task_struct *, int,
-			      const struct sched_param *);
-extern int sched_setscheduler_nocheck(struct task_struct *, int,
-				      const struct sched_param *);
-extern struct task_struct *idle_task(int cpu);
-/**
- * is_idle_task - is the specified task an idle task?
- * @p: the task in question.
- */
-static inline bool is_idle_task(const struct task_struct *p)
-{
-	return p->pid == 0;
-}
-extern struct task_struct *curr_task(int cpu);
-extern void set_curr_task(int cpu, struct task_struct *p);
-
-void yield(void);
-
-/*
- * The default (Linux) execution domain.
- */
-extern struct exec_domain	default_exec_domain;
-
-union thread_union {
-	struct thread_info thread_info;
-	unsigned long stack[THREAD_SIZE/sizeof(long)];
-};
-
-#ifndef __HAVE_ARCH_KSTACK_END
-static inline int kstack_end(void *addr)
-{
-	/* Reliable end of stack detection:
-	 * Some APM bios versions misalign the stack
-	 */
-	return !(((unsigned long)addr+sizeof(void*)-1) & (THREAD_SIZE-sizeof(void*)));
-}
-#endif
-
-extern union thread_union init_thread_union;
-extern struct task_struct init_task;
-
-extern struct   mm_struct init_mm;
-
-extern struct pid_namespace init_pid_ns;
-
-/*
- * find a task by one of its numerical ids
- *
- * find_task_by_pid_ns():
- *      finds a task by its pid in the specified namespace
- * find_task_by_vpid():
- *      finds a task by its virtual pid
- *
- * see also find_vpid() etc in include/linux/pid.h
- */
-
-extern struct task_struct *find_task_by_vpid(pid_t nr);
-extern struct task_struct *find_task_by_pid_ns(pid_t nr,
-		struct pid_namespace *ns);
-
-extern void __set_special_pids(struct pid *pid);
-
-/* per-UID process charging. */
-extern struct user_struct * alloc_uid(struct user_namespace *, uid_t);
-static inline struct user_struct *get_uid(struct user_struct *u)
-{
-	atomic_inc(&u->__count);
-	return u;
-}
-extern void free_uid(struct user_struct *);
-extern void release_uids(struct user_namespace *ns);
-
-#include <asm/current.h>
-
-extern void xtime_update(unsigned long ticks);
-
-extern int wake_up_state(struct task_struct *tsk, unsigned int state);
-extern int wake_up_process(struct task_struct *tsk);
-extern void wake_up_new_task(struct task_struct *tsk);
-#ifdef CONFIG_SMP
- extern void kick_process(struct task_struct *tsk);
-#else
- static inline void kick_process(struct task_struct *tsk) { }
-#endif
-extern void sched_fork(struct task_struct *p);
-extern void sched_dead(struct task_struct *p);
-
-extern void proc_caches_init(void);
-extern void flush_signals(struct task_struct *);
-extern void __flush_signals(struct task_struct *);
-extern void ignore_signals(struct task_struct *);
-extern void flush_signal_handlers(struct task_struct *, int force_default);
-extern int dequeue_signal(struct task_struct *tsk, sigset_t *mask, siginfo_t *info);
-
-static inline int dequeue_signal_lock(struct task_struct *tsk, sigset_t *mask, siginfo_t *info)
-{
-	unsigned long flags;
-	int ret;
-
-	spin_lock_irqsave(&tsk->sighand->siglock, flags);
-	ret = dequeue_signal(tsk, mask, info);
-	spin_unlock_irqrestore(&tsk->sighand->siglock, flags);
-
-	return ret;
-}
-
-extern void block_all_signals(int (*notifier)(void *priv), void *priv,
-			      sigset_t *mask);
-extern void unblock_all_signals(void);
-extern void release_task(struct task_struct * p);
-extern int send_sig_info(int, struct siginfo *, struct task_struct *);
-extern int force_sigsegv(int, struct task_struct *);
-extern int force_sig_info(int, struct siginfo *, struct task_struct *);
-extern int __kill_pgrp_info(int sig, struct siginfo *info, struct pid *pgrp);
-extern int kill_pid_info(int sig, struct siginfo *info, struct pid *pid);
-extern int kill_pid_info_as_cred(int, struct siginfo *, struct pid *,
-				const struct cred *, u32);
-extern int kill_pgrp(struct pid *pid, int sig, int priv);
-extern int kill_pid(struct pid *pid, int sig, int priv);
-extern int kill_proc_info(int, struct siginfo *, pid_t);
-extern __must_check bool do_notify_parent(struct task_struct *, int);
-extern void __wake_up_parent(struct task_struct *p, struct task_struct *parent);
-extern void force_sig(int, struct task_struct *);
-extern int send_sig(int, struct task_struct *, int);
-extern int zap_other_threads(struct task_struct *p);
-extern struct sigqueue *sigqueue_alloc(void);
-extern void sigqueue_free(struct sigqueue *);
-extern int send_sigqueue(struct sigqueue *,  struct task_struct *, int group);
-extern int do_sigaction(int, struct k_sigaction *, struct k_sigaction *);
-extern int do_sigaltstack(const stack_t __user *, stack_t __user *, unsigned long);
-
-static inline int kill_cad_pid(int sig, int priv)
-{
-	return kill_pid(cad_pid, sig, priv);
-}
-
-/* These can be the second arg to send_sig_info/send_group_sig_info.  */
-#define SEND_SIG_NOINFO ((struct siginfo *) 0)
-#define SEND_SIG_PRIV	((struct siginfo *) 1)
-#define SEND_SIG_FORCED	((struct siginfo *) 2)
-
-/*
- * True if we are on the alternate signal stack.
- */
-static inline int on_sig_stack(unsigned long sp)
-{
-#ifdef CONFIG_STACK_GROWSUP
-	return sp >= current->sas_ss_sp &&
-		sp - current->sas_ss_sp < current->sas_ss_size;
-#else
-	return sp > current->sas_ss_sp &&
-		sp - current->sas_ss_sp <= current->sas_ss_size;
-#endif
-}
-
-static inline int sas_ss_flags(unsigned long sp)
-{
-	return (current->sas_ss_size == 0 ? SS_DISABLE
-		: on_sig_stack(sp) ? SS_ONSTACK : 0);
-}
-
-/*
- * Routines for handling mm_structs
- */
-extern struct mm_struct * mm_alloc(void);
-
-/* mmdrop drops the mm and the page tables */
-extern void __mmdrop(struct mm_struct *);
-static inline void mmdrop(struct mm_struct * mm)
-{
-	if (unlikely(atomic_dec_and_test(&mm->mm_count)))
-		__mmdrop(mm);
-}
-
-/* mmput gets rid of the mappings and all user-space */
-extern void mmput(struct mm_struct *);
-/* Grab a reference to a task's mm, if it is not already going away */
-extern struct mm_struct *get_task_mm(struct task_struct *task);
-/*
- * Grab a reference to a task's mm, if it is not already going away
- * and ptrace_may_access with the mode parameter passed to it
- * succeeds.
- */
-extern struct mm_struct *mm_access(struct task_struct *task, unsigned int mode);
-/* Remove the current tasks stale references to the old mm_struct */
-extern void mm_release(struct task_struct *, struct mm_struct *);
-/* Allocate a new mm structure and copy contents from tsk->mm */
-extern struct mm_struct *dup_mm(struct task_struct *tsk);
-
-extern int copy_thread(unsigned long, unsigned long, unsigned long,
-			struct task_struct *, struct pt_regs *);
-extern void flush_thread(void);
-extern void exit_thread(void);
-
-extern void exit_files(struct task_struct *);
-extern void __cleanup_sighand(struct sighand_struct *);
-
-extern void exit_itimers(struct signal_struct *);
-extern void flush_itimer_signals(void);
-
-extern void do_group_exit(int);
-
-extern void daemonize(const char *, ...);
-extern int allow_signal(int);
-extern int disallow_signal(int);
-
-extern int do_execve(const char *,
-		     const char __user * const __user *,
-		     const char __user * const __user *, struct pt_regs *);
-extern long do_fork(unsigned long, unsigned long, struct pt_regs *, unsigned long, int __user *, int __user *);
-struct task_struct *fork_idle(int);
-
-extern void set_task_comm(struct task_struct *tsk, char *from);
-extern char *get_task_comm(char *to, struct task_struct *tsk);
-
-#ifdef CONFIG_SMP
-void scheduler_ipi(void);
-extern unsigned long wait_task_inactive(struct task_struct *, long match_state);
-#else
-static inline void scheduler_ipi(void) { }
-static inline unsigned long wait_task_inactive(struct task_struct *p,
-					       long match_state)
-{
-	return 1;
-}
-#endif
-
-#define next_task(p) \
-	list_entry_rcu((p)->tasks.next, struct task_struct, tasks)
-
-#define for_each_process(p) \
-	for (p = &init_task ; (p = next_task(p)) != &init_task ; )
-
-extern bool current_is_single_threaded(void);
-
-/*
- * Careful: do_each_thread/while_each_thread is a double loop so
- *          'break' will not work as expected - use goto instead.
- */
-#define do_each_thread(g, t) \
-	for (g = t = &init_task ; (g = t = next_task(g)) != &init_task ; ) do
-
-#define while_each_thread(g, t) \
-	while ((t = next_thread(t)) != g)
-
-static inline int get_nr_threads(struct task_struct *tsk)
-{
-	return tsk->signal->nr_threads;
-}
-
-static inline bool thread_group_leader(struct task_struct *p)
-{
-	return p->exit_signal >= 0;
-}
-
-/* Do to the insanities of de_thread it is possible for a process
- * to have the pid of the thread group leader without actually being
- * the thread group leader.  For iteration through the pids in proc
- * all we care about is that we have a task with the appropriate
- * pid, we don't actually care if we have the right task.
- */
-static inline int has_group_leader_pid(struct task_struct *p)
-{
-	return p->pid == p->tgid;
-}
-
-static inline
-int same_thread_group(struct task_struct *p1, struct task_struct *p2)
-{
-	return p1->tgid == p2->tgid;
-}
-
-static inline struct task_struct *next_thread(const struct task_struct *p)
-{
-	return list_entry_rcu(p->thread_group.next,
-			      struct task_struct, thread_group);
-}
-
-static inline int thread_group_empty(struct task_struct *p)
-{
-	return list_empty(&p->thread_group);
-}
-
-#define delay_group_leader(p) \
-		(thread_group_leader(p) && !thread_group_empty(p))
-
-/*
- * Protects ->fs, ->files, ->mm, ->group_info, ->comm, keyring
- * subscriptions and synchronises with wait4().  Also used in procfs.  Also
- * pins the final release of task.io_context.  Also protects ->cpuset and
- * ->cgroup.subsys[]. And ->vfork_done.
- *
- * Nests both inside and outside of read_lock(&tasklist_lock).
- * It must not be nested with write_lock_irq(&tasklist_lock),
- * neither inside nor outside.
- */
-static inline void task_lock(struct task_struct *p)
-{
-	spin_lock(&p->alloc_lock);
-}
-
-static inline void task_unlock(struct task_struct *p)
-{
-	spin_unlock(&p->alloc_lock);
-}
-
-extern struct sighand_struct *__lock_task_sighand(struct task_struct *tsk,
-							unsigned long *flags);
-
-static inline struct sighand_struct *lock_task_sighand(struct task_struct *tsk,
-						       unsigned long *flags)
-{
-	struct sighand_struct *ret;
-
-	ret = __lock_task_sighand(tsk, flags);
-	(void)__cond_lock(&tsk->sighand->siglock, ret);
-	return ret;
-}
-
-static inline void unlock_task_sighand(struct task_struct *tsk,
-						unsigned long *flags)
-{
-	spin_unlock_irqrestore(&tsk->sighand->siglock, *flags);
-}
-
-#ifdef CONFIG_CGROUPS
-static inline void threadgroup_change_begin(struct task_struct *tsk)
-{
-	down_read(&tsk->signal->group_rwsem);
-}
-static inline void threadgroup_change_end(struct task_struct *tsk)
-{
-	up_read(&tsk->signal->group_rwsem);
-}
-
-/**
- * threadgroup_lock - lock threadgroup
- * @tsk: member task of the threadgroup to lock
- *
- * Lock the threadgroup @tsk belongs to.  No new task is allowed to enter
- * and member tasks aren't allowed to exit (as indicated by PF_EXITING) or
- * perform exec.  This is useful for cases where the threadgroup needs to
- * stay stable across blockable operations.
- *
- * fork and exit paths explicitly call threadgroup_change_{begin|end}() for
- * synchronization.  While held, no new task will be added to threadgroup
- * and no existing live task will have its PF_EXITING set.
- *
- * During exec, a task goes and puts its thread group through unusual
- * changes.  After de-threading, exclusive access is assumed to resources
- * which are usually shared by tasks in the same group - e.g. sighand may
- * be replaced with a new one.  Also, the exec'ing task takes over group
- * leader role including its pid.  Exclude these changes while locked by
- * grabbing cred_guard_mutex which is used to synchronize exec path.
- */
-static inline void threadgroup_lock(struct task_struct *tsk)
-{
-	/*
-	 * exec uses exit for de-threading nesting group_rwsem inside
-	 * cred_guard_mutex. Grab cred_guard_mutex first.
-	 */
-	mutex_lock(&tsk->signal->cred_guard_mutex);
-	down_write(&tsk->signal->group_rwsem);
-}
-
-/**
- * threadgroup_unlock - unlock threadgroup
- * @tsk: member task of the threadgroup to unlock
- *
- * Reverse threadgroup_lock().
- */
-static inline void threadgroup_unlock(struct task_struct *tsk)
-{
-	up_write(&tsk->signal->group_rwsem);
-	mutex_unlock(&tsk->signal->cred_guard_mutex);
-}
-#else
-static inline void threadgroup_change_begin(struct task_struct *tsk) {}
-static inline void threadgroup_change_end(struct task_struct *tsk) {}
-static inline void threadgroup_lock(struct task_struct *tsk) {}
-static inline void threadgroup_unlock(struct task_struct *tsk) {}
-#endif
-
-#ifndef __HAVE_THREAD_FUNCTIONS
-
-#define task_thread_info(task)	((struct thread_info *)(task)->stack)
-#define task_stack_page(task)	((task)->stack)
-
-static inline void setup_thread_stack(struct task_struct *p, struct task_struct *org)
-{
-	*task_thread_info(p) = *task_thread_info(org);
-	task_thread_info(p)->task = p;
-}
-
-static inline unsigned long *end_of_stack(struct task_struct *p)
-{
-	return (unsigned long *)(task_thread_info(p) + 1);
-}
-
-#endif
-
-static inline int object_is_on_stack(void *obj)
-{
-	void *stack = task_stack_page(current);
-
-	return (obj >= stack) && (obj < (stack + THREAD_SIZE));
-}
-
-extern void thread_info_cache_init(void);
-
-#ifdef CONFIG_DEBUG_STACK_USAGE
-static inline unsigned long stack_not_used(struct task_struct *p)
-{
-	unsigned long *n = end_of_stack(p);
-
-	do { 	/* Skip over canary */
-		n++;
-	} while (!*n);
-
-	return (unsigned long)n - (unsigned long)end_of_stack(p);
-}
-#endif
-
-/* set thread flags in other task's structures
- * - see asm/thread_info.h for TIF_xxxx flags available
- */
-static inline void set_tsk_thread_flag(struct task_struct *tsk, int flag)
-{
-	set_ti_thread_flag(task_thread_info(tsk), flag);
-}
-
-static inline void clear_tsk_thread_flag(struct task_struct *tsk, int flag)
-{
-	clear_ti_thread_flag(task_thread_info(tsk), flag);
-}
-
-static inline int test_and_set_tsk_thread_flag(struct task_struct *tsk, int flag)
-{
-	return test_and_set_ti_thread_flag(task_thread_info(tsk), flag);
-}
-
-static inline int test_and_clear_tsk_thread_flag(struct task_struct *tsk, int flag)
-{
-	return test_and_clear_ti_thread_flag(task_thread_info(tsk), flag);
-}
-
-static inline int test_tsk_thread_flag(struct task_struct *tsk, int flag)
-{
-	return test_ti_thread_flag(task_thread_info(tsk), flag);
-}
-
-static inline void set_tsk_need_resched(struct task_struct *tsk)
-{
-	set_tsk_thread_flag(tsk,TIF_NEED_RESCHED);
-}
-
-static inline void clear_tsk_need_resched(struct task_struct *tsk)
-{
-	clear_tsk_thread_flag(tsk,TIF_NEED_RESCHED);
-}
-
-static inline int test_tsk_need_resched(struct task_struct *tsk)
-{
-	return unlikely(test_tsk_thread_flag(tsk,TIF_NEED_RESCHED));
-}
-
-static inline int restart_syscall(void)
-{
-	set_tsk_thread_flag(current, TIF_SIGPENDING);
-	return -ERESTARTNOINTR;
-}
-
-static inline int signal_pending(struct task_struct *p)
-{
-	return unlikely(test_tsk_thread_flag(p,TIF_SIGPENDING));
-}
-
-static inline int __fatal_signal_pending(struct task_struct *p)
-{
-	return unlikely(sigismember(&p->pending.signal, SIGKILL));
-}
-
-static inline int fatal_signal_pending(struct task_struct *p)
-{
-	return signal_pending(p) && __fatal_signal_pending(p);
-}
-
-static inline int signal_pending_state(long state, struct task_struct *p)
-{
-	if (!(state & (TASK_INTERRUPTIBLE | TASK_WAKEKILL)))
-		return 0;
-	if (!signal_pending(p))
-		return 0;
-
-	return (state & TASK_INTERRUPTIBLE) || __fatal_signal_pending(p);
-}
-
-static inline int need_resched(void)
-{
-	return unlikely(test_thread_flag(TIF_NEED_RESCHED));
-}
-
-/*
- * cond_resched() and cond_resched_lock(): latency reduction via
- * explicit rescheduling in places that are safe. The return
- * value indicates whether a reschedule was done in fact.
- * cond_resched_lock() will drop the spinlock before scheduling,
- * cond_resched_softirq() will enable bhs before scheduling.
- */
-extern int _cond_resched(void);
-
-#define cond_resched() ({			\
-	__might_sleep(__FILE__, __LINE__, 0);	\
-	_cond_resched();			\
-})
-
-extern int __cond_resched_lock(spinlock_t *lock);
-
-#ifdef CONFIG_PREEMPT_COUNT
-#define PREEMPT_LOCK_OFFSET	PREEMPT_OFFSET
-#else
-#define PREEMPT_LOCK_OFFSET	0
-#endif
-
-#define cond_resched_lock(lock) ({				\
-	__might_sleep(__FILE__, __LINE__, PREEMPT_LOCK_OFFSET);	\
-	__cond_resched_lock(lock);				\
-})
-
-extern int __cond_resched_softirq(void);
-
-#define cond_resched_softirq() ({					\
-	__might_sleep(__FILE__, __LINE__, SOFTIRQ_DISABLE_OFFSET);	\
-	__cond_resched_softirq();					\
-})
-
-/*
- * Does a critical section need to be broken due to another
- * task waiting?: (technically does not depend on CONFIG_PREEMPT,
- * but a general need for low latency)
- */
-static inline int spin_needbreak(spinlock_t *lock)
-{
-#ifdef CONFIG_PREEMPT
-	return spin_is_contended(lock);
-#else
-	return 0;
-#endif
-}
-
-/*
- * Thread group CPU time accounting.
- */
-void thread_group_cputime(struct task_struct *tsk, struct task_cputime *times);
-void thread_group_cputimer(struct task_struct *tsk, struct task_cputime *times);
-
-static inline void thread_group_cputime_init(struct signal_struct *sig)
-{
-	raw_spin_lock_init(&sig->cputimer.lock);
-}
-
-/*
- * Reevaluate whether the task has signals pending delivery.
- * Wake the task if so.
- * This is required every time the blocked sigset_t changes.
- * callers must hold sighand->siglock.
- */
-extern void recalc_sigpending_and_wake(struct task_struct *t);
-extern void recalc_sigpending(void);
-
-extern void signal_wake_up(struct task_struct *t, int resume_stopped);
-
-/*
- * Wrappers for p->thread_info->cpu access. No-op on UP.
- */
-#ifdef CONFIG_SMP
-
-static inline unsigned int task_cpu(const struct task_struct *p)
-{
-	return task_thread_info(p)->cpu;
-}
-
-extern void set_task_cpu(struct task_struct *p, unsigned int cpu);
-
-#else
-
-static inline unsigned int task_cpu(const struct task_struct *p)
-{
-	return 0;
-}
-
-static inline void set_task_cpu(struct task_struct *p, unsigned int cpu)
-{
-}
-
-#endif /* CONFIG_SMP */
-
-extern long sched_setaffinity(pid_t pid, const struct cpumask *new_mask);
-extern long sched_getaffinity(pid_t pid, struct cpumask *mask);
-
-extern void normalize_rt_tasks(void);
-
-#ifdef CONFIG_CGROUP_SCHED
-
-extern struct task_group root_task_group;
-
-extern struct task_group *sched_create_group(struct task_group *parent);
-extern void sched_destroy_group(struct task_group *tg);
-extern void sched_move_task(struct task_struct *tsk);
-#ifdef CONFIG_FAIR_GROUP_SCHED
-extern int sched_group_set_shares(struct task_group *tg, unsigned long shares);
-extern unsigned long sched_group_shares(struct task_group *tg);
-#endif
-#ifdef CONFIG_RT_GROUP_SCHED
-extern int sched_group_set_rt_runtime(struct task_group *tg,
-				      long rt_runtime_us);
-extern long sched_group_rt_runtime(struct task_group *tg);
-extern int sched_group_set_rt_period(struct task_group *tg,
-				      long rt_period_us);
-extern long sched_group_rt_period(struct task_group *tg);
-extern int sched_rt_can_attach(struct task_group *tg, struct task_struct *tsk);
-#endif
-#endif
-
-extern int task_can_switch_user(struct user_struct *up,
-					struct task_struct *tsk);
-
-#ifdef CONFIG_TASK_XACCT
-static inline void add_rchar(struct task_struct *tsk, ssize_t amt)
-{
-	tsk->ioac.rchar += amt;
-}
-
-static inline void add_wchar(struct task_struct *tsk, ssize_t amt)
-{
-	tsk->ioac.wchar += amt;
-}
-
-static inline void inc_syscr(struct task_struct *tsk)
-{
-	tsk->ioac.syscr++;
-}
-
-static inline void inc_syscw(struct task_struct *tsk)
-{
-	tsk->ioac.syscw++;
-}
-#else
-static inline void add_rchar(struct task_struct *tsk, ssize_t amt)
-{
-}
-
-static inline void add_wchar(struct task_struct *tsk, ssize_t amt)
-{
-}
-
-static inline void inc_syscr(struct task_struct *tsk)
-{
-}
-
-static inline void inc_syscw(struct task_struct *tsk)
-{
-}
-#endif
-
-#ifndef TASK_SIZE_OF
-#define TASK_SIZE_OF(tsk)	TASK_SIZE
-#endif
-
-#ifdef CONFIG_MM_OWNER
-extern void mm_update_next_owner(struct mm_struct *mm);
-extern void mm_init_owner(struct mm_struct *mm, struct task_struct *p);
-#else
-static inline void mm_update_next_owner(struct mm_struct *mm)
-{
-}
-
-static inline void mm_init_owner(struct mm_struct *mm, struct task_struct *p)
-{
-}
-#endif /* CONFIG_MM_OWNER */
-
-static inline unsigned long task_rlimit(const struct task_struct *tsk,
-		unsigned int limit)
-{
-	return ACCESS_ONCE(tsk->signal->rlim[limit].rlim_cur);
-}
-
-static inline unsigned long task_rlimit_max(const struct task_struct *tsk,
-		unsigned int limit)
-{
-	return ACCESS_ONCE(tsk->signal->rlim[limit].rlim_max);
-}
-
-static inline unsigned long rlimit(unsigned int limit)
-{
-	return task_rlimit(current, limit);
-}
-
-static inline unsigned long rlimit_max(unsigned int limit)
-{
-	return task_rlimit_max(current, limit);
-}
-
-#endif /* __KERNEL__ */
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/screen_info.h b/ANDROID_3.4.5/include/linux/screen_info.h
deleted file mode 100644
index 899fbb48..00000000
--- a/ANDROID_3.4.5/include/linux/screen_info.h
+++ /dev/null
@@ -1,84 +0,0 @@
-#ifndef _SCREEN_INFO_H
-#define _SCREEN_INFO_H
-
-#include <linux/types.h>
-
-/*
- * These are set up by the setup-routine at boot-time:
- */
-
-struct screen_info {
-	__u8  orig_x;		/* 0x00 */
-	__u8  orig_y;		/* 0x01 */
-	__u16 ext_mem_k;	/* 0x02 */
-	__u16 orig_video_page;	/* 0x04 */
-	__u8  orig_video_mode;	/* 0x06 */
-	__u8  orig_video_cols;	/* 0x07 */
-	__u8  flags;		/* 0x08 */
-	__u8  unused2;		/* 0x09 */
-	__u16 orig_video_ega_bx;/* 0x0a */
-	__u16 unused3;		/* 0x0c */
-	__u8  orig_video_lines;	/* 0x0e */
-	__u8  orig_video_isVGA;	/* 0x0f */
-	__u16 orig_video_points;/* 0x10 */
-
-	/* VESA graphic mode -- linear frame buffer */
-	__u16 lfb_width;	/* 0x12 */
-	__u16 lfb_height;	/* 0x14 */
-	__u16 lfb_depth;	/* 0x16 */
-	__u32 lfb_base;		/* 0x18 */
-	__u32 lfb_size;		/* 0x1c */
-	__u16 cl_magic, cl_offset; /* 0x20 */
-	__u16 lfb_linelength;	/* 0x24 */
-	__u8  red_size;		/* 0x26 */
-	__u8  red_pos;		/* 0x27 */
-	__u8  green_size;	/* 0x28 */
-	__u8  green_pos;	/* 0x29 */
-	__u8  blue_size;	/* 0x2a */
-	__u8  blue_pos;		/* 0x2b */
-	__u8  rsvd_size;	/* 0x2c */
-	__u8  rsvd_pos;		/* 0x2d */
-	__u16 vesapm_seg;	/* 0x2e */
-	__u16 vesapm_off;	/* 0x30 */
-	__u16 pages;		/* 0x32 */
-	__u16 vesa_attributes;	/* 0x34 */
-	__u32 capabilities;     /* 0x36 */
-	__u8  _reserved[6];	/* 0x3a */
-} __attribute__((packed));
-
-#define VIDEO_TYPE_MDA		0x10	/* Monochrome Text Display	*/
-#define VIDEO_TYPE_CGA		0x11	/* CGA Display 			*/
-#define VIDEO_TYPE_EGAM		0x20	/* EGA/VGA in Monochrome Mode	*/
-#define VIDEO_TYPE_EGAC		0x21	/* EGA in Color Mode		*/
-#define VIDEO_TYPE_VGAC		0x22	/* VGA+ in Color Mode		*/
-#define VIDEO_TYPE_VLFB		0x23	/* VESA VGA in graphic mode	*/
-
-#define VIDEO_TYPE_PICA_S3	0x30	/* ACER PICA-61 local S3 video	*/
-#define VIDEO_TYPE_MIPS_G364	0x31    /* MIPS Magnum 4000 G364 video  */
-#define VIDEO_TYPE_SGI          0x33    /* Various SGI graphics hardware */
-
-#define VIDEO_TYPE_TGAC		0x40	/* DEC TGA */
-
-#define VIDEO_TYPE_SUN          0x50    /* Sun frame buffer. */
-#define VIDEO_TYPE_SUNPCI       0x51    /* Sun PCI based frame buffer. */
-
-#define VIDEO_TYPE_PMAC		0x60	/* PowerMacintosh frame buffer. */
-
-#define VIDEO_TYPE_EFI		0x70	/* EFI graphic mode		*/
-
-#define VIDEO_FLAGS_NOCURSOR	(1 << 0) /* The video mode has no cursor set */
-
-#ifdef __KERNEL__
-extern struct screen_info screen_info;
-
-#define ORIG_X			(screen_info.orig_x)
-#define ORIG_Y			(screen_info.orig_y)
-#define ORIG_VIDEO_MODE		(screen_info.orig_video_mode)
-#define ORIG_VIDEO_COLS 	(screen_info.orig_video_cols)
-#define ORIG_VIDEO_EGA_BX	(screen_info.orig_video_ega_bx)
-#define ORIG_VIDEO_LINES	(screen_info.orig_video_lines)
-#define ORIG_VIDEO_ISVGA	(screen_info.orig_video_isVGA)
-#define ORIG_VIDEO_POINTS       (screen_info.orig_video_points)
-#endif /* __KERNEL__ */
-
-#endif /* _SCREEN_INFO_H */
diff --git a/ANDROID_3.4.5/include/linux/sctp.h b/ANDROID_3.4.5/include/linux/sctp.h
deleted file mode 100644
index c11a2870..00000000
--- a/ANDROID_3.4.5/include/linux/sctp.h
+++ /dev/null
@@ -1,711 +0,0 @@
-/* SCTP kernel reference Implementation
- * (C) Copyright IBM Corp. 2001, 2004
- * Copyright (c) 1999-2000 Cisco, Inc.
- * Copyright (c) 1999-2001 Motorola, Inc.
- * Copyright (c) 2001 Intel Corp.
- * Copyright (c) 2001 Nokia, Inc.
- * Copyright (c) 2001 La Monte H.P. Yarroll
- *
- * This file is part of the SCTP kernel reference Implementation
- *
- * Various protocol defined structures.
- *
- * This SCTP implementation is free software;
- * you can redistribute it and/or modify it under the terms of
- * the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This SCTP implementation is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- *                 ************************
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
- * See the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with GNU CC; see the file COPYING.  If not, write to
- * the Free Software Foundation, 59 Temple Place - Suite 330,
- * Boston, MA 02111-1307, USA.
- *
- * Please send any bug reports or fixes you make to the
- * email address(es):
- *    lksctp developers <lksctp-developerst@lists.sourceforge.net>
- *
- * Or submit a bug report through the following website:
- *    http://www.sf.net/projects/lksctp
- *
- * Written or modified by:
- *    La Monte H.P. Yarroll <piggy@acm.org>
- *    Karl Knutson <karl@athena.chicago.il.us>
- *    Jon Grimm <jgrimm@us.ibm.com>
- *    Xingang Guo <xingang.guo@intel.com>
- *    randall@sctp.chicago.il.us
- *    kmorneau@cisco.com
- *    qxie1@email.mot.com
- *    Sridhar Samudrala <sri@us.ibm.com>
- *    Kevin Gao <kevin.gao@intel.com>
- *
- * Any bugs reported given to us we will try to fix... any fixes shared will
- * be incorporated into the next SCTP release.
- */
-#ifndef __LINUX_SCTP_H__
-#define __LINUX_SCTP_H__
-
-#include <linux/in.h>		/* We need in_addr.  */
-#include <linux/in6.h>		/* We need in6_addr.  */
-
-
-/* Section 3.1.  SCTP Common Header Format */
-typedef struct sctphdr {
-	__be16 source;
-	__be16 dest;
-	__be32 vtag;
-	__le32 checksum;
-} __packed sctp_sctphdr_t;
-
-#ifdef __KERNEL__
-#include <linux/skbuff.h>
-
-static inline struct sctphdr *sctp_hdr(const struct sk_buff *skb)
-{
-	return (struct sctphdr *)skb_transport_header(skb);
-}
-#endif
-
-/* Section 3.2.  Chunk Field Descriptions. */
-typedef struct sctp_chunkhdr {
-	__u8 type;
-	__u8 flags;
-	__be16 length;
-} __packed sctp_chunkhdr_t;
-
-
-/* Section 3.2.  Chunk Type Values.
- * [Chunk Type] identifies the type of information contained in the Chunk
- * Value field. It takes a value from 0 to 254. The value of 255 is
- * reserved for future use as an extension field.
- */
-typedef enum {
-	SCTP_CID_DATA			= 0,
-        SCTP_CID_INIT			= 1,
-        SCTP_CID_INIT_ACK		= 2,
-        SCTP_CID_SACK			= 3,
-        SCTP_CID_HEARTBEAT		= 4,
-        SCTP_CID_HEARTBEAT_ACK		= 5,
-        SCTP_CID_ABORT			= 6,
-        SCTP_CID_SHUTDOWN		= 7,
-        SCTP_CID_SHUTDOWN_ACK		= 8,
-        SCTP_CID_ERROR			= 9,
-        SCTP_CID_COOKIE_ECHO		= 10,
-        SCTP_CID_COOKIE_ACK	        = 11,
-        SCTP_CID_ECN_ECNE		= 12,
-        SCTP_CID_ECN_CWR		= 13,
-        SCTP_CID_SHUTDOWN_COMPLETE	= 14,
-
-	/* AUTH Extension Section 4.1 */
-	SCTP_CID_AUTH			= 0x0F,
-
-	/* PR-SCTP Sec 3.2 */
-	SCTP_CID_FWD_TSN		= 0xC0,
-
-	/* Use hex, as defined in ADDIP sec. 3.1 */
-	SCTP_CID_ASCONF			= 0xC1,
-	SCTP_CID_ASCONF_ACK		= 0x80,
-} sctp_cid_t; /* enum */
-
-
-/* Section 3.2
- *  Chunk Types are encoded such that the highest-order two bits specify
- *  the action that must be taken if the processing endpoint does not
- *  recognize the Chunk Type.
- */
-typedef enum {
-	SCTP_CID_ACTION_DISCARD     = 0x00,
-	SCTP_CID_ACTION_DISCARD_ERR = 0x40,
-	SCTP_CID_ACTION_SKIP        = 0x80,
-	SCTP_CID_ACTION_SKIP_ERR    = 0xc0,
-} sctp_cid_action_t;
-
-enum { SCTP_CID_ACTION_MASK = 0xc0, };
-
-/* This flag is used in Chunk Flags for ABORT and SHUTDOWN COMPLETE.
- *
- * 3.3.7 Abort Association (ABORT) (6):
- *    The T bit is set to 0 if the sender had a TCB that it destroyed.
- *    If the sender did not have a TCB it should set this bit to 1.
- */
-enum { SCTP_CHUNK_FLAG_T = 0x01 };
-
-/*
- *  Set the T bit
- *
- *      0                   1                   2                   3
- *      0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
- *     +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- *     |   Type = 14   |Reserved     |T|      Length = 4               |
- *     +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- *
- * Chunk Flags: 8 bits
- *
- *   Reserved:  7 bits
- *     Set to 0 on transmit and ignored on receipt.
- *
- *   T bit:  1 bit
- *     The T bit is set to 0 if the sender had a TCB that it destroyed. If
- *     the sender did NOT have a TCB it should set this bit to 1.
- *
- * Note: Special rules apply to this chunk for verification, please
- * see Section 8.5.1 for details.
- */
-
-#define sctp_test_T_bit(c)    ((c)->chunk_hdr->flags & SCTP_CHUNK_FLAG_T)
-
-/* RFC 2960
- * Section 3.2.1 Optional/Variable-length Parmaeter Format.
- */
-
-typedef struct sctp_paramhdr {
-	__be16 type;
-	__be16 length;
-} __packed sctp_paramhdr_t;
-
-typedef enum {
-
-	/* RFC 2960 Section 3.3.5 */
-	SCTP_PARAM_HEARTBEAT_INFO		= cpu_to_be16(1),
-	/* RFC 2960 Section 3.3.2.1 */
-	SCTP_PARAM_IPV4_ADDRESS			= cpu_to_be16(5),
-	SCTP_PARAM_IPV6_ADDRESS			= cpu_to_be16(6),
-	SCTP_PARAM_STATE_COOKIE			= cpu_to_be16(7),
-	SCTP_PARAM_UNRECOGNIZED_PARAMETERS	= cpu_to_be16(8),
-	SCTP_PARAM_COOKIE_PRESERVATIVE		= cpu_to_be16(9),
-	SCTP_PARAM_HOST_NAME_ADDRESS		= cpu_to_be16(11),
-	SCTP_PARAM_SUPPORTED_ADDRESS_TYPES	= cpu_to_be16(12),
-	SCTP_PARAM_ECN_CAPABLE			= cpu_to_be16(0x8000),
-
-	/* AUTH Extension Section 3 */
-	SCTP_PARAM_RANDOM			= cpu_to_be16(0x8002),
-	SCTP_PARAM_CHUNKS			= cpu_to_be16(0x8003),
-	SCTP_PARAM_HMAC_ALGO			= cpu_to_be16(0x8004),
-
-	/* Add-IP: Supported Extensions, Section 4.2 */
-	SCTP_PARAM_SUPPORTED_EXT	= cpu_to_be16(0x8008),
-
-	/* PR-SCTP Sec 3.1 */
-	SCTP_PARAM_FWD_TSN_SUPPORT	= cpu_to_be16(0xc000),
-
-	/* Add-IP Extension. Section 3.2 */
-	SCTP_PARAM_ADD_IP		= cpu_to_be16(0xc001),
-	SCTP_PARAM_DEL_IP		= cpu_to_be16(0xc002),
-	SCTP_PARAM_ERR_CAUSE		= cpu_to_be16(0xc003),
-	SCTP_PARAM_SET_PRIMARY		= cpu_to_be16(0xc004),
-	SCTP_PARAM_SUCCESS_REPORT	= cpu_to_be16(0xc005),
-	SCTP_PARAM_ADAPTATION_LAYER_IND = cpu_to_be16(0xc006),
-
-} sctp_param_t; /* enum */
-
-
-/* RFC 2960 Section 3.2.1
- *  The Parameter Types are encoded such that the highest-order two bits
- *  specify the action that must be taken if the processing endpoint does
- *  not recognize the Parameter Type.
- *
- */
-typedef enum {
-	SCTP_PARAM_ACTION_DISCARD     = cpu_to_be16(0x0000),
-	SCTP_PARAM_ACTION_DISCARD_ERR = cpu_to_be16(0x4000),
-	SCTP_PARAM_ACTION_SKIP        = cpu_to_be16(0x8000),
-	SCTP_PARAM_ACTION_SKIP_ERR    = cpu_to_be16(0xc000),
-} sctp_param_action_t;
-
-enum { SCTP_PARAM_ACTION_MASK = cpu_to_be16(0xc000), };
-
-/* RFC 2960 Section 3.3.1 Payload Data (DATA) (0) */
-
-typedef struct sctp_datahdr {
-	__be32 tsn;
-	__be16 stream;
-	__be16 ssn;
-	__be32 ppid;
-	__u8  payload[0];
-} __packed sctp_datahdr_t;
-
-typedef struct sctp_data_chunk {
-        sctp_chunkhdr_t chunk_hdr;
-        sctp_datahdr_t  data_hdr;
-} __packed sctp_data_chunk_t;
-
-/* DATA Chuck Specific Flags */
-enum {
-	SCTP_DATA_MIDDLE_FRAG	= 0x00,
-	SCTP_DATA_LAST_FRAG	= 0x01,
-	SCTP_DATA_FIRST_FRAG	= 0x02,
-	SCTP_DATA_NOT_FRAG	= 0x03,
-	SCTP_DATA_UNORDERED	= 0x04,
-	SCTP_DATA_SACK_IMM	= 0x08,
-};
-enum { SCTP_DATA_FRAG_MASK = 0x03, };
-
-
-/* RFC 2960 Section 3.3.2 Initiation (INIT) (1)
- *
- *  This chunk is used to initiate a SCTP association between two
- *  endpoints.
- */
-typedef struct sctp_inithdr {
-	__be32 init_tag;
-	__be32 a_rwnd;
-	__be16 num_outbound_streams;
-	__be16 num_inbound_streams;
-	__be32 initial_tsn;
-	__u8  params[0];
-} __packed sctp_inithdr_t;
-
-typedef struct sctp_init_chunk {
-	sctp_chunkhdr_t chunk_hdr;
-	sctp_inithdr_t init_hdr;
-} __packed sctp_init_chunk_t;
-
-
-/* Section 3.3.2.1. IPv4 Address Parameter (5) */
-typedef struct sctp_ipv4addr_param {
-	sctp_paramhdr_t param_hdr;
-	struct in_addr  addr;
-} __packed sctp_ipv4addr_param_t;
-
-/* Section 3.3.2.1. IPv6 Address Parameter (6) */
-typedef struct sctp_ipv6addr_param {
-	sctp_paramhdr_t param_hdr;
-	struct in6_addr addr;
-} __packed sctp_ipv6addr_param_t;
-
-/* Section 3.3.2.1 Cookie Preservative (9) */
-typedef struct sctp_cookie_preserve_param {
-	sctp_paramhdr_t param_hdr;
-	__be32          lifespan_increment;
-} __packed sctp_cookie_preserve_param_t;
-
-/* Section 3.3.2.1 Host Name Address (11) */
-typedef struct sctp_hostname_param {
-	sctp_paramhdr_t param_hdr;
-	uint8_t hostname[0];
-} __packed sctp_hostname_param_t;
-
-/* Section 3.3.2.1 Supported Address Types (12) */
-typedef struct sctp_supported_addrs_param {
-	sctp_paramhdr_t param_hdr;
-	__be16 types[0];
-} __packed sctp_supported_addrs_param_t;
-
-/* Appendix A. ECN Capable (32768) */
-typedef struct sctp_ecn_capable_param {
-	sctp_paramhdr_t param_hdr;
-} __packed sctp_ecn_capable_param_t;
-
-/* ADDIP Section 3.2.6 Adaptation Layer Indication */
-typedef struct sctp_adaptation_ind_param {
-	struct sctp_paramhdr param_hdr;
-	__be32 adaptation_ind;
-} __packed sctp_adaptation_ind_param_t;
-
-/* ADDIP Section 4.2.7 Supported Extensions Parameter */
-typedef struct sctp_supported_ext_param {
-	struct sctp_paramhdr param_hdr;
-	__u8 chunks[0];
-} __packed sctp_supported_ext_param_t;
-
-/* AUTH Section 3.1 Random */
-typedef struct sctp_random_param {
-	sctp_paramhdr_t param_hdr;
-	__u8 random_val[0];
-} __packed sctp_random_param_t;
-
-/* AUTH Section 3.2 Chunk List */
-typedef struct sctp_chunks_param {
-	sctp_paramhdr_t param_hdr;
-	__u8 chunks[0];
-} __packed sctp_chunks_param_t;
-
-/* AUTH Section 3.3 HMAC Algorithm */
-typedef struct sctp_hmac_algo_param {
-	sctp_paramhdr_t param_hdr;
-	__be16 hmac_ids[0];
-} __packed sctp_hmac_algo_param_t;
-
-/* RFC 2960.  Section 3.3.3 Initiation Acknowledgement (INIT ACK) (2):
- *   The INIT ACK chunk is used to acknowledge the initiation of an SCTP
- *   association.
- */
-typedef sctp_init_chunk_t sctp_initack_chunk_t;
-
-/* Section 3.3.3.1 State Cookie (7) */
-typedef struct sctp_cookie_param {
-	sctp_paramhdr_t p;
-	__u8 body[0];
-} __packed sctp_cookie_param_t;
-
-/* Section 3.3.3.1 Unrecognized Parameters (8) */
-typedef struct sctp_unrecognized_param {
-	sctp_paramhdr_t param_hdr;
-	sctp_paramhdr_t unrecognized;
-} __packed sctp_unrecognized_param_t;
-
-
-
-/*
- * 3.3.4 Selective Acknowledgement (SACK) (3):
- *
- *  This chunk is sent to the peer endpoint to acknowledge received DATA
- *  chunks and to inform the peer endpoint of gaps in the received
- *  subsequences of DATA chunks as represented by their TSNs.
- */
-
-typedef struct sctp_gap_ack_block {
-	__be16 start;
-	__be16 end;
-} __packed sctp_gap_ack_block_t;
-
-typedef __be32 sctp_dup_tsn_t;
-
-typedef union {
-	sctp_gap_ack_block_t	gab;
-        sctp_dup_tsn_t		dup;
-} sctp_sack_variable_t;
-
-typedef struct sctp_sackhdr {
-	__be32 cum_tsn_ack;
-	__be32 a_rwnd;
-	__be16 num_gap_ack_blocks;
-	__be16 num_dup_tsns;
-	sctp_sack_variable_t variable[0];
-} __packed sctp_sackhdr_t;
-
-typedef struct sctp_sack_chunk {
-	sctp_chunkhdr_t chunk_hdr;
-	sctp_sackhdr_t sack_hdr;
-} __packed sctp_sack_chunk_t;
-
-
-/* RFC 2960.  Section 3.3.5 Heartbeat Request (HEARTBEAT) (4):
- *
- *  An endpoint should send this chunk to its peer endpoint to probe the
- *  reachability of a particular destination transport address defined in
- *  the present association.
- */
-
-typedef struct sctp_heartbeathdr {
-	sctp_paramhdr_t info;
-} __packed sctp_heartbeathdr_t;
-
-typedef struct sctp_heartbeat_chunk {
-	sctp_chunkhdr_t chunk_hdr;
-	sctp_heartbeathdr_t hb_hdr;
-} __packed sctp_heartbeat_chunk_t;
-
-
-/* For the abort and shutdown ACK we must carry the init tag in the
- * common header. Just the common header is all that is needed with a
- * chunk descriptor.
- */
-typedef struct sctp_abort_chunk {
-        sctp_chunkhdr_t uh;
-} __packed sctp_abort_chunk_t;
-
-
-/* For the graceful shutdown we must carry the tag (in common header)
- * and the highest consecutive acking value.
- */
-typedef struct sctp_shutdownhdr {
-	__be32 cum_tsn_ack;
-} __packed sctp_shutdownhdr_t;
-
-struct sctp_shutdown_chunk_t {
-        sctp_chunkhdr_t    chunk_hdr;
-        sctp_shutdownhdr_t shutdown_hdr;
-} __packed;
-
-/* RFC 2960.  Section 3.3.10 Operation Error (ERROR) (9) */
-
-typedef struct sctp_errhdr {
-	__be16 cause;
-	__be16 length;
-	__u8  variable[0];
-} __packed sctp_errhdr_t;
-
-typedef struct sctp_operr_chunk {
-        sctp_chunkhdr_t chunk_hdr;
-	sctp_errhdr_t   err_hdr;
-} __packed sctp_operr_chunk_t;
-
-/* RFC 2960 3.3.10 - Operation Error
- *
- * Cause Code: 16 bits (unsigned integer)
- *
- *     Defines the type of error conditions being reported.
- *    Cause Code
- *     Value           Cause Code
- *     ---------      ----------------
- *      1              Invalid Stream Identifier
- *      2              Missing Mandatory Parameter
- *      3              Stale Cookie Error
- *      4              Out of Resource
- *      5              Unresolvable Address
- *      6              Unrecognized Chunk Type
- *      7              Invalid Mandatory Parameter
- *      8              Unrecognized Parameters
- *      9              No User Data
- *     10              Cookie Received While Shutting Down
- */
-typedef enum {
-
-	SCTP_ERROR_NO_ERROR	   = cpu_to_be16(0x00),
-	SCTP_ERROR_INV_STRM	   = cpu_to_be16(0x01),
-	SCTP_ERROR_MISS_PARAM 	   = cpu_to_be16(0x02),
-	SCTP_ERROR_STALE_COOKIE	   = cpu_to_be16(0x03),
-	SCTP_ERROR_NO_RESOURCE 	   = cpu_to_be16(0x04),
-	SCTP_ERROR_DNS_FAILED      = cpu_to_be16(0x05),
-	SCTP_ERROR_UNKNOWN_CHUNK   = cpu_to_be16(0x06),
-	SCTP_ERROR_INV_PARAM       = cpu_to_be16(0x07),
-	SCTP_ERROR_UNKNOWN_PARAM   = cpu_to_be16(0x08),
-	SCTP_ERROR_NO_DATA         = cpu_to_be16(0x09),
-	SCTP_ERROR_COOKIE_IN_SHUTDOWN = cpu_to_be16(0x0a),
-
-
-	/* SCTP Implementation Guide:
-	 *  11  Restart of an association with new addresses
-	 *  12  User Initiated Abort
-	 *  13  Protocol Violation
-	 */
-
-	SCTP_ERROR_RESTART         = cpu_to_be16(0x0b),
-	SCTP_ERROR_USER_ABORT      = cpu_to_be16(0x0c),
-	SCTP_ERROR_PROTO_VIOLATION = cpu_to_be16(0x0d),
-
-	/* ADDIP Section 3.3  New Error Causes
-	 *
-	 * Four new Error Causes are added to the SCTP Operational Errors,
-	 * primarily for use in the ASCONF-ACK chunk.
-	 *
-	 * Value          Cause Code
-	 * ---------      ----------------
-	 * 0x00A0          Request to Delete Last Remaining IP Address.
-	 * 0x00A1          Operation Refused Due to Resource Shortage.
-	 * 0x00A2          Request to Delete Source IP Address.
-	 * 0x00A3          Association Aborted due to illegal ASCONF-ACK
-	 * 0x00A4          Request refused - no authorization.
-	 */
-	SCTP_ERROR_DEL_LAST_IP	= cpu_to_be16(0x00A0),
-	SCTP_ERROR_RSRC_LOW	= cpu_to_be16(0x00A1),
-	SCTP_ERROR_DEL_SRC_IP	= cpu_to_be16(0x00A2),
-	SCTP_ERROR_ASCONF_ACK   = cpu_to_be16(0x00A3),
-	SCTP_ERROR_REQ_REFUSED	= cpu_to_be16(0x00A4),
-
-	/* AUTH Section 4.  New Error Cause
-	 *
-	 * This section defines a new error cause that will be sent if an AUTH
-	 * chunk is received with an unsupported HMAC identifier.
-	 * illustrates the new error cause.
-	 *
-	 * Cause Code      Error Cause Name
-	 * --------------------------------------------------------------
-	 * 0x0105          Unsupported HMAC Identifier
-	 */
-	 SCTP_ERROR_UNSUP_HMAC	= cpu_to_be16(0x0105)
-} sctp_error_t;
-
-
-
-/* RFC 2960.  Appendix A.  Explicit Congestion Notification.
- *   Explicit Congestion Notification Echo (ECNE) (12)
- */
-typedef struct sctp_ecnehdr {
-	__be32 lowest_tsn;
-} sctp_ecnehdr_t;
-
-typedef struct sctp_ecne_chunk {
-	sctp_chunkhdr_t chunk_hdr;
-	sctp_ecnehdr_t ence_hdr;
-} __packed sctp_ecne_chunk_t;
-
-/* RFC 2960.  Appendix A.  Explicit Congestion Notification.
- *   Congestion Window Reduced (CWR) (13)
- */
-typedef struct sctp_cwrhdr {
-	__be32 lowest_tsn;
-} sctp_cwrhdr_t;
-
-typedef struct sctp_cwr_chunk {
-	sctp_chunkhdr_t chunk_hdr;
-	sctp_cwrhdr_t cwr_hdr;
-} __packed sctp_cwr_chunk_t;
-
-/* PR-SCTP
- * 3.2 Forward Cumulative TSN Chunk Definition (FORWARD TSN)
- *
- * Forward Cumulative TSN chunk has the following format:
- *
- *        0                   1                   2                   3
- *        0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
- *      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- *      |   Type = 192  |  Flags = 0x00 |        Length = Variable      |
- *      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- *      |                      New Cumulative TSN                       |
- *      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- *      |         Stream-1              |       Stream Sequence-1       |
- *      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- *      \                                                               /
- *      /                                                               \
- *      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- *      |         Stream-N              |       Stream Sequence-N       |
- *      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- *
- *      Chunk Flags:
- *
- *        Set to all zeros on transmit and ignored on receipt.
- *
- *      New Cumulative TSN: 32 bit u_int
- *
- *       This indicates the new cumulative TSN to the data receiver. Upon
- *       the reception of this value, the data receiver MUST consider
- *       any missing TSNs earlier than or equal to this value as received
- *       and stop reporting them as gaps in any subsequent SACKs.
- *
- *      Stream-N: 16 bit u_int
- *
- *       This field holds a stream number that was skipped by this
- *       FWD-TSN.
- *
- *      Stream Sequence-N: 16 bit u_int
- *       This field holds the sequence number associated with the stream
- *       that was skipped. The stream sequence field holds the largest stream
- *       sequence number in this stream being skipped.  The receiver of
- *       the FWD-TSN's can use the Stream-N and Stream Sequence-N fields
- *       to enable delivery of any stranded TSN's that remain on the stream
- *       re-ordering queues. This field MUST NOT report TSN's corresponding
- *       to DATA chunk that are marked as unordered. For ordered DATA
- *       chunks this field MUST be filled in.
- */
-struct sctp_fwdtsn_skip {
-	__be16 stream;
-	__be16 ssn;
-} __packed;
-
-struct sctp_fwdtsn_hdr {
-	__be32 new_cum_tsn;
-	struct sctp_fwdtsn_skip skip[0];
-} __packed;
-
-struct sctp_fwdtsn_chunk {
-	struct sctp_chunkhdr chunk_hdr;
-	struct sctp_fwdtsn_hdr fwdtsn_hdr;
-} __packed;
-
-
-/* ADDIP
- * Section 3.1.1 Address Configuration Change Chunk (ASCONF)
- *
- * 	Serial Number: 32 bits (unsigned integer)
- *	This value represents a Serial Number for the ASCONF Chunk. The
- *	valid range of Serial Number is from 0 to 2^32-1.
- *	Serial Numbers wrap back to 0 after reaching 2^32 -1.
- *
- *	Address Parameter: 8 or 20 bytes (depending on type)
- *	The address is an address of the sender of the ASCONF chunk,
- *	the address MUST be considered part of the association by the
- *	peer endpoint. This field may be used by the receiver of the 
- *	ASCONF to help in finding the association. This parameter MUST
- *	be present in every ASCONF message i.e. it is a mandatory TLV
- *	parameter.
- *
- *	ASCONF Parameter: TLV format
- *	Each Address configuration change is represented by a TLV
- *	parameter as defined in Section 3.2. One or more requests may
- *	be present in an ASCONF Chunk.
- *
- * Section 3.1.2 Address Configuration Acknowledgement Chunk (ASCONF-ACK)
- * 
- *	Serial Number: 32 bits (unsigned integer)
- *	This value represents the Serial Number for the received ASCONF
- *	Chunk that is acknowledged by this chunk. This value is copied
- *	from the received ASCONF Chunk. 
- *
- *	ASCONF Parameter Response: TLV format
- *	The ASCONF Parameter Response is used in the ASCONF-ACK to
- *	report status of ASCONF processing.
- */
-typedef struct sctp_addip_param {
-	sctp_paramhdr_t	param_hdr;
-	__be32		crr_id;
-} __packed sctp_addip_param_t;
-
-typedef struct sctp_addiphdr {
-	__be32	serial;
-	__u8	params[0];
-} __packed sctp_addiphdr_t;
-
-typedef struct sctp_addip_chunk {
-	sctp_chunkhdr_t chunk_hdr;
-	sctp_addiphdr_t addip_hdr;
-} __packed sctp_addip_chunk_t;
-
-/* AUTH
- * Section 4.1  Authentication Chunk (AUTH)
- *
- *   This chunk is used to hold the result of the HMAC calculation.
- *
- *    0                   1                   2                   3
- *    0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
- *   +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- *   | Type = 0x0F   |   Flags=0     |             Length            |
- *   +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- *   |     Shared Key Identifier     |   HMAC Identifier             |
- *   +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- *   |                                                               |
- *   \                             HMAC                              /
- *   /                                                               \
- *   +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- *
- *   Type: 1 byte (unsigned integer)
- *   	This value MUST be set to 0x0F for  all AUTH-chunks.
- *
- *   Flags: 1 byte (unsigned integer)
- *	Set to zero on transmit and ignored on receipt.
- *
- *   Length: 2 bytes (unsigned integer)
- *   	This value holds the length of the HMAC in bytes plus 8.
- *
- *  Shared Key Identifier: 2 bytes (unsigned integer)
- *	This value describes which endpoint pair shared key is used.
- *
- *   HMAC Identifier: 2 bytes (unsigned integer)
- *   	This value describes which message digest is being used.  Table 2
- *	shows the currently defined values.
- *
- *    The following Table 2 shows the currently defined values for HMAC
- *       identifiers.
- *
- *	 +-----------------+--------------------------+
- *	 | HMAC Identifier | Message Digest Algorithm |
- *	 +-----------------+--------------------------+
- *	 | 0               | Reserved                 |
- *	 | 1               | SHA-1 defined in [8]     |
- *	 | 2               | Reserved                 |
- *	 | 3               | SHA-256 defined in [8]   |
- *	 +-----------------+--------------------------+
- *
- *
- *   HMAC: n bytes (unsigned integer) This hold the result of the HMAC
- *      calculation.
- */
-typedef struct sctp_authhdr {
-	__be16 shkey_id;
-	__be16 hmac_id;
-	__u8   hmac[0];
-} __packed sctp_authhdr_t;
-
-typedef struct sctp_auth_chunk {
-	sctp_chunkhdr_t chunk_hdr;
-	sctp_authhdr_t auth_hdr;
-} __packed sctp_auth_chunk_t;
-
-#endif /* __LINUX_SCTP_H__ */
diff --git a/ANDROID_3.4.5/include/linux/scx200.h b/ANDROID_3.4.5/include/linux/scx200.h
deleted file mode 100644
index de466e11..00000000
--- a/ANDROID_3.4.5/include/linux/scx200.h
+++ /dev/null
@@ -1,51 +0,0 @@
-/* linux/include/linux/scx200.h
-
-   Copyright (c) 2001,2002 Christer Weinigel <wingel@nano-system.com>
-
-   Defines for the National Semiconductor SCx200 Processors
-*/
-
-/* Interesting stuff for the National Semiconductor SCx200 CPU */
-
-extern unsigned scx200_cb_base;
-
-#define scx200_cb_present() (scx200_cb_base!=0)
-
-/* F0 PCI Header/Bridge Configuration Registers */
-#define SCx200_DOCCS_BASE 0x78	/* DOCCS Base Address Register */
-#define SCx200_DOCCS_CTRL 0x7c	/* DOCCS Control Register */
-
-/* GPIO Register Block */
-#define SCx200_GPIO_SIZE 0x2c	/* Size of GPIO register block */
-
-/* General Configuration Block */
-#define SCx200_CB_BASE_FIXED 0x9000	/* Base fixed at 0x9000 according to errata? */
-
-/* Watchdog Timer */
-#define SCx200_WDT_OFFSET 0x00	/* offset within configuration block */
-#define SCx200_WDT_SIZE 0x05	/* size */
-
-#define SCx200_WDT_WDTO 0x00	/* Time-Out Register */
-#define SCx200_WDT_WDCNFG 0x02	/* Configuration Register */
-#define SCx200_WDT_WDSTS 0x04	/* Status Register */
-#define SCx200_WDT_WDSTS_WDOVF (1<<0) /* Overflow bit */
-
-/* High Resolution Timer */
-#define SCx200_TIMER_OFFSET 0x08
-#define SCx200_TIMER_SIZE 0x06
-
-/* Clock Generators */
-#define SCx200_CLOCKGEN_OFFSET 0x10
-#define SCx200_CLOCKGEN_SIZE 0x10
-
-/* Pin Multiplexing and Miscellaneous Configuration Registers */
-#define SCx200_MISC_OFFSET 0x30
-#define SCx200_MISC_SIZE 0x10
-
-#define SCx200_PMR 0x30		/* Pin Multiplexing Register */
-#define SCx200_MCR 0x34		/* Miscellaneous Configuration Register */
-#define SCx200_INTSEL 0x38	/* Interrupt Selection Register */
-#define SCx200_IID 0x3c		/* IA On a Chip Identification Number Reg */
-#define SCx200_REV 0x3d		/* Revision Register */
-#define SCx200_CBA 0x3e		/* Configuration Base Address Register */
-#define SCx200_CBA_SCRATCH 0x64	/* Configuration Base Address Scratchpad */
diff --git a/ANDROID_3.4.5/include/linux/scx200_gpio.h b/ANDROID_3.4.5/include/linux/scx200_gpio.h
deleted file mode 100644
index ece4e553..00000000
--- a/ANDROID_3.4.5/include/linux/scx200_gpio.h
+++ /dev/null
@@ -1,88 +0,0 @@
-u32 scx200_gpio_configure(unsigned index, u32 set, u32 clear);
-
-extern unsigned scx200_gpio_base;
-extern unsigned long scx200_gpio_shadow[2];
-extern struct nsc_gpio_ops scx200_gpio_ops;
-
-#define scx200_gpio_present() (scx200_gpio_base!=0)
-
-/* Definitions to make sure I do the same thing in all functions */
-#define __SCx200_GPIO_BANK unsigned bank = index>>5
-#define __SCx200_GPIO_IOADDR unsigned short ioaddr = scx200_gpio_base+0x10*bank
-#define __SCx200_GPIO_SHADOW unsigned long *shadow = scx200_gpio_shadow+bank
-#define __SCx200_GPIO_INDEX index &= 31
-
-#define __SCx200_GPIO_OUT __asm__ __volatile__("outsl":"=mS" (shadow):"d" (ioaddr), "0" (shadow))
-
-/* returns the value of the GPIO pin */
-
-static inline int scx200_gpio_get(unsigned index) {
-	__SCx200_GPIO_BANK;
-	__SCx200_GPIO_IOADDR + 0x04;
-	__SCx200_GPIO_INDEX;
-		
-	return (inl(ioaddr) & (1<<index)) ? 1 : 0;
-}
-
-/* return the value driven on the GPIO signal (the value that will be
-   driven if the GPIO is configured as an output, it might not be the
-   state of the GPIO right now if the GPIO is configured as an input) */
-
-static inline int scx200_gpio_current(unsigned index) {
-        __SCx200_GPIO_BANK;
-	__SCx200_GPIO_INDEX;
-		
-	return (scx200_gpio_shadow[bank] & (1<<index)) ? 1 : 0;
-}
-
-/* drive the GPIO signal high */
-
-static inline void scx200_gpio_set_high(unsigned index) {
-	__SCx200_GPIO_BANK;
-	__SCx200_GPIO_IOADDR;
-	__SCx200_GPIO_SHADOW;
-	__SCx200_GPIO_INDEX;
-	set_bit(index, shadow);	/* __set_bit()? */
-	__SCx200_GPIO_OUT;
-}
-
-/* drive the GPIO signal low */
-
-static inline void scx200_gpio_set_low(unsigned index) {
-	__SCx200_GPIO_BANK;
-	__SCx200_GPIO_IOADDR;
-	__SCx200_GPIO_SHADOW;
-	__SCx200_GPIO_INDEX;
-	clear_bit(index, shadow); /* __clear_bit()? */
-	__SCx200_GPIO_OUT;
-}
-
-/* drive the GPIO signal to state */
-
-static inline void scx200_gpio_set(unsigned index, int state) {
-	__SCx200_GPIO_BANK;
-	__SCx200_GPIO_IOADDR;
-	__SCx200_GPIO_SHADOW;
-	__SCx200_GPIO_INDEX;
-	if (state)
-		set_bit(index, shadow);
-	else
-		clear_bit(index, shadow);
-	__SCx200_GPIO_OUT;
-}
-
-/* toggle the GPIO signal */
-static inline void scx200_gpio_change(unsigned index) {
-	__SCx200_GPIO_BANK;
-	__SCx200_GPIO_IOADDR;
-	__SCx200_GPIO_SHADOW;
-	__SCx200_GPIO_INDEX;
-	change_bit(index, shadow);
-	__SCx200_GPIO_OUT;
-}
-
-#undef __SCx200_GPIO_BANK
-#undef __SCx200_GPIO_IOADDR
-#undef __SCx200_GPIO_SHADOW
-#undef __SCx200_GPIO_INDEX
-#undef __SCx200_GPIO_OUT
diff --git a/ANDROID_3.4.5/include/linux/sdla.h b/ANDROID_3.4.5/include/linux/sdla.h
deleted file mode 100644
index 9995c7fc..00000000
--- a/ANDROID_3.4.5/include/linux/sdla.h
+++ /dev/null
@@ -1,335 +0,0 @@
-/*
- * INET		An implementation of the TCP/IP protocol suite for the LINUX
- *		operating system.  INET is implemented using the  BSD Socket
- *		interface as the means of communication with the user level.
- *
- *		Global definitions for the Frame relay interface.
- *
- * Version:	@(#)if_ifrad.h	0.20	13 Apr 96
- *
- * Author:	Mike McLagan <mike.mclagan@linux.org>
- *
- * Changes:
- *		0.15	Mike McLagan	Structure packing
- *
- *		0.20	Mike McLagan	New flags for S508 buffer handling
- *
- *		This program is free software; you can redistribute it and/or
- *		modify it under the terms of the GNU General Public License
- *		as published by the Free Software Foundation; either version
- *		2 of the License, or (at your option) any later version.
- */
-
-#ifndef SDLA_H
-#define SDLA_H
-
-/* adapter type */
-#define SDLA_TYPES
-#define SDLA_S502A			5020
-#define SDLA_S502E			5021
-#define SDLA_S503			5030
-#define SDLA_S507			5070
-#define SDLA_S508			5080
-#define SDLA_S509			5090
-#define SDLA_UNKNOWN			-1
-
-/* port selection flags for the S508 */
-#define SDLA_S508_PORT_V35		0x00
-#define SDLA_S508_PORT_RS232		0x02
-
-/* Z80 CPU speeds */
-#define SDLA_CPU_3M			0x00
-#define SDLA_CPU_5M			0x01
-#define SDLA_CPU_7M			0x02
-#define SDLA_CPU_8M			0x03
-#define SDLA_CPU_10M			0x04
-#define SDLA_CPU_16M			0x05
-#define SDLA_CPU_12M			0x06
-
-/* some private IOCTLs */
-#define SDLA_IDENTIFY			(FRAD_LAST_IOCTL + 1)
-#define SDLA_CPUSPEED			(FRAD_LAST_IOCTL + 2)
-#define SDLA_PROTOCOL			(FRAD_LAST_IOCTL + 3)
-
-#define SDLA_CLEARMEM			(FRAD_LAST_IOCTL + 4)
-#define SDLA_WRITEMEM			(FRAD_LAST_IOCTL + 5)
-#define SDLA_READMEM			(FRAD_LAST_IOCTL + 6)
-
-struct sdla_mem {
-   int  addr;
-   int  len;
-   void __user *data;
-};
-
-#define SDLA_START			(FRAD_LAST_IOCTL + 7)
-#define SDLA_STOP			(FRAD_LAST_IOCTL + 8)
-
-/* some offsets in the Z80's memory space */
-#define SDLA_NMIADDR			0x0000
-#define SDLA_CONF_ADDR			0x0010
-#define SDLA_S502A_NMIADDR		0x0066
-#define SDLA_CODE_BASEADDR		0x0100
-#define SDLA_WINDOW_SIZE		0x2000
-#define SDLA_ADDR_MASK			0x1FFF
-
-/* largest handleable block of data */
-#define SDLA_MAX_DATA			4080
-#define SDLA_MAX_MTU			4072	/* MAX_DATA - sizeof(fradhdr) */
-#define SDLA_MAX_DLCI			24
-
-/* this should be the same as frad_conf */
-struct sdla_conf {
-   short station;
-   short config;
-   short kbaud;
-   short clocking;
-   short max_frm;
-   short T391;
-   short T392;
-   short N391;
-   short N392;
-   short N393;
-   short CIR_fwd;
-   short Bc_fwd;
-   short Be_fwd;
-   short CIR_bwd;
-   short Bc_bwd;
-   short Be_bwd;
-};
-
-/* this should be the same as dlci_conf */
-struct sdla_dlci_conf {
-   short config;
-   short CIR_fwd;
-   short Bc_fwd;
-   short Be_fwd;
-   short CIR_bwd;
-   short Bc_bwd;
-   short Be_bwd; 
-   short Tc_fwd;
-   short Tc_bwd;
-   short Tf_max;
-   short Tb_max;
-};
-
-#ifdef __KERNEL__
-
-/* important Z80 window addresses */
-#define SDLA_CONTROL_WND		0xE000
-
-#define SDLA_502_CMD_BUF		0xEF60
-#define SDLA_502_RCV_BUF		0xA900
-#define	SDLA_502_TXN_AVAIL		0xFFF1
-#define SDLA_502_RCV_AVAIL		0xFFF2
-#define SDLA_502_EVENT_FLAGS		0xFFF3
-#define SDLA_502_MDM_STATUS		0xFFF4
-#define SDLA_502_IRQ_INTERFACE		0xFFFD
-#define SDLA_502_IRQ_PERMISSION		0xFFFE
-#define SDLA_502_DATA_OFS		0x0010
-
-#define SDLA_508_CMD_BUF		0xE000
-#define SDLA_508_TXBUF_INFO		0xF100
-#define SDLA_508_RXBUF_INFO		0xF120
-#define SDLA_508_EVENT_FLAGS		0xF003
-#define SDLA_508_MDM_STATUS		0xF004
-#define SDLA_508_IRQ_INTERFACE		0xF010
-#define SDLA_508_IRQ_PERMISSION		0xF011
-#define SDLA_508_TSE_OFFSET		0xF012
-
-/* Event flags */
-#define SDLA_EVENT_STATUS		0x01
-#define SDLA_EVENT_DLCI_STATUS		0x02
-#define SDLA_EVENT_BAD_DLCI		0x04
-#define SDLA_EVENT_LINK_DOWN		0x40
-
-/* IRQ Trigger flags */
-#define SDLA_INTR_RX			0x01
-#define SDLA_INTR_TX			0x02
-#define SDLA_INTR_MODEM			0x04
-#define SDLA_INTR_COMPLETE		0x08
-#define SDLA_INTR_STATUS		0x10
-#define SDLA_INTR_TIMER			0x20
-
-/* DLCI status bits */
-#define SDLA_DLCI_DELETED		0x01
-#define SDLA_DLCI_ACTIVE		0x02
-#define SDLA_DLCI_WAITING		0x04
-#define SDLA_DLCI_NEW			0x08
-#define SDLA_DLCI_INCLUDED		0x40
-
-/* valid command codes */
-#define	SDLA_INFORMATION_WRITE		0x01
-#define	SDLA_INFORMATION_READ		0x02
-#define SDLA_ISSUE_IN_CHANNEL_SIGNAL	0x03
-#define	SDLA_SET_DLCI_CONFIGURATION	0x10
-#define	SDLA_READ_DLCI_CONFIGURATION	0x11
-#define	SDLA_DISABLE_COMMUNICATIONS	0x12
-#define	SDLA_ENABLE_COMMUNICATIONS	0x13
-#define	SDLA_READ_DLC_STATUS		0x14
-#define	SDLA_READ_DLC_STATISTICS	0x15
-#define	SDLA_FLUSH_DLC_STATISTICS	0x16
-#define	SDLA_LIST_ACTIVE_DLCI		0x17
-#define	SDLA_FLUSH_INFORMATION_BUFFERS	0x18
-#define	SDLA_ADD_DLCI			0x20
-#define	SDLA_DELETE_DLCI		0x21
-#define	SDLA_ACTIVATE_DLCI		0x22
-#define	SDLA_DEACTIVATE_DLCI		0x23
-#define	SDLA_READ_MODEM_STATUS		0x30
-#define	SDLA_SET_MODEM_STATUS		0x31
-#define	SDLA_READ_COMMS_ERR_STATS	0x32
-#define SDLA_FLUSH_COMMS_ERR_STATS	0x33
-#define	SDLA_READ_CODE_VERSION		0x40
-#define SDLA_SET_IRQ_TRIGGER		0x50
-#define SDLA_GET_IRQ_TRIGGER		0x51
-
-/* In channel signal types */
-#define SDLA_ICS_LINK_VERIFY		0x02
-#define SDLA_ICS_STATUS_ENQ		0x03
-
-/* modem status flags */
-#define SDLA_MODEM_DTR_HIGH		0x01
-#define SDLA_MODEM_RTS_HIGH		0x02
-#define SDLA_MODEM_DCD_HIGH		0x08
-#define SDLA_MODEM_CTS_HIGH		0x20
-
-/* used for RET_MODEM interpretation */
-#define SDLA_MODEM_DCD_LOW		0x01
-#define SDLA_MODEM_CTS_LOW		0x02
-
-/* return codes */
-#define SDLA_RET_OK			0x00
-#define SDLA_RET_COMMUNICATIONS		0x01
-#define SDLA_RET_CHANNEL_INACTIVE	0x02
-#define SDLA_RET_DLCI_INACTIVE		0x03
-#define SDLA_RET_DLCI_CONFIG		0x04
-#define SDLA_RET_BUF_TOO_BIG		0x05
-#define SDLA_RET_NO_DATA		0x05
-#define SDLA_RET_BUF_OVERSIZE		0x06
-#define SDLA_RET_CIR_OVERFLOW		0x07
-#define SDLA_RET_NO_BUFS		0x08
-#define SDLA_RET_TIMEOUT		0x0A
-#define SDLA_RET_MODEM			0x10
-#define SDLA_RET_CHANNEL_OFF		0x11
-#define SDLA_RET_CHANNEL_ON		0x12
-#define SDLA_RET_DLCI_STATUS		0x13
-#define SDLA_RET_DLCI_UNKNOWN       	0x14
-#define SDLA_RET_COMMAND_INVALID    	0x1F
-
-/* Configuration flags */
-#define SDLA_DIRECT_RECV		0x0080
-#define SDLA_TX_NO_EXCEPT		0x0020
-#define SDLA_NO_ICF_MSGS		0x1000
-#define SDLA_TX50_RX50			0x0000
-#define SDLA_TX70_RX30			0x2000
-#define SDLA_TX30_RX70			0x4000
-
-/* IRQ selection flags */
-#define SDLA_IRQ_RECEIVE		0x01
-#define SDLA_IRQ_TRANSMIT		0x02
-#define SDLA_IRQ_MODEM_STAT		0x04
-#define SDLA_IRQ_COMMAND		0x08
-#define SDLA_IRQ_CHANNEL		0x10
-#define SDLA_IRQ_TIMER			0x20
-
-/* definitions for PC memory mapping */
-#define SDLA_8K_WINDOW			0x01
-#define SDLA_S502_SEG_A			0x10
-#define SDLA_S502_SEG_C			0x20
-#define SDLA_S502_SEG_D			0x00
-#define SDLA_S502_SEG_E			0x30
-#define SDLA_S507_SEG_A			0x00
-#define SDLA_S507_SEG_B			0x40
-#define SDLA_S507_SEG_C			0x80
-#define SDLA_S507_SEG_E			0xC0
-#define SDLA_S508_SEG_A			0x00
-#define SDLA_S508_SEG_C			0x10
-#define SDLA_S508_SEG_D			0x08
-#define SDLA_S508_SEG_E			0x18
-
-/* SDLA adapter port constants */
-#define SDLA_IO_EXTENTS			0x04
-	
-#define SDLA_REG_CONTROL		0x00
-#define SDLA_REG_PC_WINDOW		0x01	/* offset for PC window select latch */
-#define SDLA_REG_Z80_WINDOW 		0x02	/* offset for Z80 window select latch */
-#define SDLA_REG_Z80_CONTROL		0x03	/* offset for Z80 control latch */
-	
-#define SDLA_S502_STS			0x00	/* status reg for 502, 502E, 507 */
-#define SDLA_S508_GNRL			0x00	/* general purp. reg for 508 */
-#define SDLA_S508_STS			0x01	/* status reg for 508 */
-#define SDLA_S508_IDR			0x02	/* ID reg for 508 */
-	
-/* control register flags */
-#define SDLA_S502A_START		0x00	/* start the CPU */
-#define SDLA_S502A_INTREQ		0x02
-#define SDLA_S502A_INTEN		0x04
-#define SDLA_S502A_HALT			0x08	/* halt the CPU */	
-#define SDLA_S502A_NMI			0x10	/* issue an NMI to the CPU */
-
-#define SDLA_S502E_CPUEN		0x01
-#define SDLA_S502E_ENABLE		0x02
-#define SDLA_S502E_INTACK		0x04
-	
-#define SDLA_S507_ENABLE		0x01
-#define SDLA_S507_IRQ3			0x00
-#define SDLA_S507_IRQ4			0x20
-#define SDLA_S507_IRQ5			0x40
-#define SDLA_S507_IRQ7			0x60
-#define SDLA_S507_IRQ10			0x80
-#define SDLA_S507_IRQ11			0xA0
-#define SDLA_S507_IRQ12			0xC0
-#define SDLA_S507_IRQ15			0xE0
-	
-#define SDLA_HALT			0x00
-#define SDLA_CPUEN			0x02
-#define SDLA_MEMEN			0x04
-#define SDLA_S507_EPROMWR		0x08
-#define SDLA_S507_EPROMCLK		0x10
-#define SDLA_S508_INTRQ			0x08
-#define SDLA_S508_INTEN			0x10
-
-struct sdla_cmd {
-   char  opp_flag;
-   char  cmd;
-   short length;
-   char  retval;
-   short dlci;
-   char  flags;
-   short rxlost_int;
-   long  rxlost_app;
-   char  reserve[2];
-   char  data[SDLA_MAX_DATA];	/* transfer data buffer */
-} __attribute__((packed));
-
-struct intr_info {
-   char  flags;
-   short txlen;
-   char  irq;
-   char  flags2;
-   short timeout;
-} __attribute__((packed));
-
-/* found in the 508's control window at RXBUF_INFO */
-struct buf_info {
-   unsigned short rse_num;
-   unsigned long  rse_base;
-   unsigned long  rse_next;
-   unsigned long  buf_base;
-   unsigned short reserved;
-   unsigned long  buf_top;
-} __attribute__((packed));
-
-/* structure pointed to by rse_base in RXBUF_INFO struct */
-struct buf_entry {
-   char  opp_flag;
-   short length;
-   short dlci;
-   char  flags;
-   short timestamp;
-   short reserved[2];
-   long  buf_addr;
-} __attribute__((packed));
-
-#endif
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/seccomp.h b/ANDROID_3.4.5/include/linux/seccomp.h
deleted file mode 100644
index cc7a4e9c..00000000
--- a/ANDROID_3.4.5/include/linux/seccomp.h
+++ /dev/null
@@ -1,52 +0,0 @@
-#ifndef _LINUX_SECCOMP_H
-#define _LINUX_SECCOMP_H
-
-
-#ifdef CONFIG_SECCOMP
-
-#include <linux/thread_info.h>
-#include <asm/seccomp.h>
-
-typedef struct { int mode; } seccomp_t;
-
-extern void __secure_computing(int);
-static inline void secure_computing(int this_syscall)
-{
-	if (unlikely(test_thread_flag(TIF_SECCOMP)))
-		__secure_computing(this_syscall);
-}
-
-extern long prctl_get_seccomp(void);
-extern long prctl_set_seccomp(unsigned long);
-
-static inline int seccomp_mode(seccomp_t *s)
-{
-	return s->mode;
-}
-
-#else /* CONFIG_SECCOMP */
-
-#include <linux/errno.h>
-
-typedef struct { } seccomp_t;
-
-#define secure_computing(x) do { } while (0)
-
-static inline long prctl_get_seccomp(void)
-{
-	return -EINVAL;
-}
-
-static inline long prctl_set_seccomp(unsigned long arg2)
-{
-	return -EINVAL;
-}
-
-static inline int seccomp_mode(seccomp_t *s)
-{
-	return 0;
-}
-
-#endif /* CONFIG_SECCOMP */
-
-#endif /* _LINUX_SECCOMP_H */
diff --git a/ANDROID_3.4.5/include/linux/securebits.h b/ANDROID_3.4.5/include/linux/securebits.h
deleted file mode 100644
index 33406174..00000000
--- a/ANDROID_3.4.5/include/linux/securebits.h
+++ /dev/null
@@ -1,54 +0,0 @@
-#ifndef _LINUX_SECUREBITS_H
-#define _LINUX_SECUREBITS_H 1
-
-/* Each securesetting is implemented using two bits. One bit specifies
-   whether the setting is on or off. The other bit specify whether the
-   setting is locked or not. A setting which is locked cannot be
-   changed from user-level. */
-#define issecure_mask(X)	(1 << (X))
-#ifdef __KERNEL__
-#define issecure(X)		(issecure_mask(X) & current_cred_xxx(securebits))
-#endif
-
-#define SECUREBITS_DEFAULT 0x00000000
-
-/* When set UID 0 has no special privileges. When unset, we support
-   inheritance of root-permissions and suid-root executable under
-   compatibility mode. We raise the effective and inheritable bitmasks
-   *of the executable file* if the effective uid of the new process is
-   0. If the real uid is 0, we raise the effective (legacy) bit of the
-   executable file. */
-#define SECURE_NOROOT			0
-#define SECURE_NOROOT_LOCKED		1  /* make bit-0 immutable */
-
-#define SECBIT_NOROOT		(issecure_mask(SECURE_NOROOT))
-#define SECBIT_NOROOT_LOCKED	(issecure_mask(SECURE_NOROOT_LOCKED))
-
-/* When set, setuid to/from uid 0 does not trigger capability-"fixup".
-   When unset, to provide compatiblility with old programs relying on
-   set*uid to gain/lose privilege, transitions to/from uid 0 cause
-   capabilities to be gained/lost. */
-#define SECURE_NO_SETUID_FIXUP		2
-#define SECURE_NO_SETUID_FIXUP_LOCKED	3  /* make bit-2 immutable */
-
-#define SECBIT_NO_SETUID_FIXUP	(issecure_mask(SECURE_NO_SETUID_FIXUP))
-#define SECBIT_NO_SETUID_FIXUP_LOCKED \
-			(issecure_mask(SECURE_NO_SETUID_FIXUP_LOCKED))
-
-/* When set, a process can retain its capabilities even after
-   transitioning to a non-root user (the set-uid fixup suppressed by
-   bit 2). Bit-4 is cleared when a process calls exec(); setting both
-   bit 4 and 5 will create a barrier through exec that no exec()'d
-   child can use this feature again. */
-#define SECURE_KEEP_CAPS		4
-#define SECURE_KEEP_CAPS_LOCKED		5  /* make bit-4 immutable */
-
-#define SECBIT_KEEP_CAPS	(issecure_mask(SECURE_KEEP_CAPS))
-#define SECBIT_KEEP_CAPS_LOCKED (issecure_mask(SECURE_KEEP_CAPS_LOCKED))
-
-#define SECURE_ALL_BITS		(issecure_mask(SECURE_NOROOT) | \
-				 issecure_mask(SECURE_NO_SETUID_FIXUP) | \
-				 issecure_mask(SECURE_KEEP_CAPS))
-#define SECURE_ALL_LOCKS	(SECURE_ALL_BITS << 1)
-
-#endif /* !_LINUX_SECUREBITS_H */
diff --git a/ANDROID_3.4.5/include/linux/security.h b/ANDROID_3.4.5/include/linux/security.h
deleted file mode 100644
index 673afbb8..00000000
--- a/ANDROID_3.4.5/include/linux/security.h
+++ /dev/null
@@ -1,3025 +0,0 @@
-/*
- * Linux Security plug
- *
- * Copyright (C) 2001 WireX Communications, Inc <chris@wirex.com>
- * Copyright (C) 2001 Greg Kroah-Hartman <greg@kroah.com>
- * Copyright (C) 2001 Networks Associates Technology, Inc <ssmalley@nai.com>
- * Copyright (C) 2001 James Morris <jmorris@intercode.com.au>
- * Copyright (C) 2001 Silicon Graphics, Inc. (Trust Technology Group)
- *
- *	This program is free software; you can redistribute it and/or modify
- *	it under the terms of the GNU General Public License as published by
- *	the Free Software Foundation; either version 2 of the License, or
- *	(at your option) any later version.
- *
- *	Due to this file being licensed under the GPL there is controversy over
- *	whether this permits you to write a module that #includes this file
- *	without placing your module under the GPL.  Please consult a lawyer for
- *	advice before doing this.
- *
- */
-
-#ifndef __LINUX_SECURITY_H
-#define __LINUX_SECURITY_H
-
-#include <linux/key.h>
-#include <linux/capability.h>
-#include <linux/slab.h>
-#include <linux/err.h>
-
-struct linux_binprm;
-struct cred;
-struct rlimit;
-struct siginfo;
-struct sem_array;
-struct sembuf;
-struct kern_ipc_perm;
-struct audit_context;
-struct super_block;
-struct inode;
-struct dentry;
-struct file;
-struct vfsmount;
-struct path;
-struct qstr;
-struct nameidata;
-struct iattr;
-struct fown_struct;
-struct file_operations;
-struct shmid_kernel;
-struct msg_msg;
-struct msg_queue;
-struct xattr;
-struct xfrm_sec_ctx;
-struct mm_struct;
-
-/* Maximum number of letters for an LSM name string */
-#define SECURITY_NAME_MAX	10
-
-/* If capable should audit the security request */
-#define SECURITY_CAP_NOAUDIT 0
-#define SECURITY_CAP_AUDIT 1
-
-struct ctl_table;
-struct audit_krule;
-struct user_namespace;
-struct timezone;
-
-/*
- * These functions are in security/capability.c and are used
- * as the default capabilities functions
- */
-extern int cap_capable(const struct cred *cred, struct user_namespace *ns,
-		       int cap, int audit);
-extern int cap_settime(const struct timespec *ts, const struct timezone *tz);
-extern int cap_ptrace_access_check(struct task_struct *child, unsigned int mode);
-extern int cap_ptrace_traceme(struct task_struct *parent);
-extern int cap_capget(struct task_struct *target, kernel_cap_t *effective, kernel_cap_t *inheritable, kernel_cap_t *permitted);
-extern int cap_capset(struct cred *new, const struct cred *old,
-		      const kernel_cap_t *effective,
-		      const kernel_cap_t *inheritable,
-		      const kernel_cap_t *permitted);
-extern int cap_bprm_set_creds(struct linux_binprm *bprm);
-extern int cap_bprm_secureexec(struct linux_binprm *bprm);
-extern int cap_inode_setxattr(struct dentry *dentry, const char *name,
-			      const void *value, size_t size, int flags);
-extern int cap_inode_removexattr(struct dentry *dentry, const char *name);
-extern int cap_inode_need_killpriv(struct dentry *dentry);
-extern int cap_inode_killpriv(struct dentry *dentry);
-extern int cap_file_mmap(struct file *file, unsigned long reqprot,
-			 unsigned long prot, unsigned long flags,
-			 unsigned long addr, unsigned long addr_only);
-extern int cap_task_fix_setuid(struct cred *new, const struct cred *old, int flags);
-extern int cap_task_prctl(int option, unsigned long arg2, unsigned long arg3,
-			  unsigned long arg4, unsigned long arg5);
-extern int cap_task_setscheduler(struct task_struct *p);
-extern int cap_task_setioprio(struct task_struct *p, int ioprio);
-extern int cap_task_setnice(struct task_struct *p, int nice);
-extern int cap_vm_enough_memory(struct mm_struct *mm, long pages);
-
-struct msghdr;
-struct sk_buff;
-struct sock;
-struct sockaddr;
-struct socket;
-struct flowi;
-struct dst_entry;
-struct xfrm_selector;
-struct xfrm_policy;
-struct xfrm_state;
-struct xfrm_user_sec_ctx;
-struct seq_file;
-
-extern int cap_netlink_send(struct sock *sk, struct sk_buff *skb);
-
-void reset_security_ops(void);
-
-#ifdef CONFIG_MMU
-extern unsigned long mmap_min_addr;
-extern unsigned long dac_mmap_min_addr;
-#else
-#define dac_mmap_min_addr	0UL
-#endif
-
-/*
- * Values used in the task_security_ops calls
- */
-/* setuid or setgid, id0 == uid or gid */
-#define LSM_SETID_ID	1
-
-/* setreuid or setregid, id0 == real, id1 == eff */
-#define LSM_SETID_RE	2
-
-/* setresuid or setresgid, id0 == real, id1 == eff, uid2 == saved */
-#define LSM_SETID_RES	4
-
-/* setfsuid or setfsgid, id0 == fsuid or fsgid */
-#define LSM_SETID_FS	8
-
-/* forward declares to avoid warnings */
-struct sched_param;
-struct request_sock;
-
-/* bprm->unsafe reasons */
-#define LSM_UNSAFE_SHARE	1
-#define LSM_UNSAFE_PTRACE	2
-#define LSM_UNSAFE_PTRACE_CAP	4
-
-#ifdef CONFIG_MMU
-extern int mmap_min_addr_handler(struct ctl_table *table, int write,
-				 void __user *buffer, size_t *lenp, loff_t *ppos);
-#endif
-
-/* security_inode_init_security callback function to write xattrs */
-typedef int (*initxattrs) (struct inode *inode,
-			   const struct xattr *xattr_array, void *fs_data);
-
-#ifdef CONFIG_SECURITY
-
-struct security_mnt_opts {
-	char **mnt_opts;
-	int *mnt_opts_flags;
-	int num_mnt_opts;
-};
-
-static inline void security_init_mnt_opts(struct security_mnt_opts *opts)
-{
-	opts->mnt_opts = NULL;
-	opts->mnt_opts_flags = NULL;
-	opts->num_mnt_opts = 0;
-}
-
-static inline void security_free_mnt_opts(struct security_mnt_opts *opts)
-{
-	int i;
-	if (opts->mnt_opts)
-		for (i = 0; i < opts->num_mnt_opts; i++)
-			kfree(opts->mnt_opts[i]);
-	kfree(opts->mnt_opts);
-	opts->mnt_opts = NULL;
-	kfree(opts->mnt_opts_flags);
-	opts->mnt_opts_flags = NULL;
-	opts->num_mnt_opts = 0;
-}
-
-/**
- * struct security_operations - main security structure
- *
- * Security module identifier.
- *
- * @name:
- *	A string that acts as a unique identifier for the LSM with max number
- *	of characters = SECURITY_NAME_MAX.
- *
- * Security hooks for program execution operations.
- *
- * @bprm_set_creds:
- *	Save security information in the bprm->security field, typically based
- *	on information about the bprm->file, for later use by the apply_creds
- *	hook.  This hook may also optionally check permissions (e.g. for
- *	transitions between security domains).
- *	This hook may be called multiple times during a single execve, e.g. for
- *	interpreters.  The hook can tell whether it has already been called by
- *	checking to see if @bprm->security is non-NULL.  If so, then the hook
- *	may decide either to retain the security information saved earlier or
- *	to replace it.
- *	@bprm contains the linux_binprm structure.
- *	Return 0 if the hook is successful and permission is granted.
- * @bprm_check_security:
- *	This hook mediates the point when a search for a binary handler will
- *	begin.  It allows a check the @bprm->security value which is set in the
- *	preceding set_creds call.  The primary difference from set_creds is
- *	that the argv list and envp list are reliably available in @bprm.  This
- *	hook may be called multiple times during a single execve; and in each
- *	pass set_creds is called first.
- *	@bprm contains the linux_binprm structure.
- *	Return 0 if the hook is successful and permission is granted.
- * @bprm_committing_creds:
- *	Prepare to install the new security attributes of a process being
- *	transformed by an execve operation, based on the old credentials
- *	pointed to by @current->cred and the information set in @bprm->cred by
- *	the bprm_set_creds hook.  @bprm points to the linux_binprm structure.
- *	This hook is a good place to perform state changes on the process such
- *	as closing open file descriptors to which access will no longer be
- *	granted when the attributes are changed.  This is called immediately
- *	before commit_creds().
- * @bprm_committed_creds:
- *	Tidy up after the installation of the new security attributes of a
- *	process being transformed by an execve operation.  The new credentials
- *	have, by this point, been set to @current->cred.  @bprm points to the
- *	linux_binprm structure.  This hook is a good place to perform state
- *	changes on the process such as clearing out non-inheritable signal
- *	state.  This is called immediately after commit_creds().
- * @bprm_secureexec:
- *	Return a boolean value (0 or 1) indicating whether a "secure exec"
- *	is required.  The flag is passed in the auxiliary table
- *	on the initial stack to the ELF interpreter to indicate whether libc
- *	should enable secure mode.
- *	@bprm contains the linux_binprm structure.
- *
- * Security hooks for filesystem operations.
- *
- * @sb_alloc_security:
- *	Allocate and attach a security structure to the sb->s_security field.
- *	The s_security field is initialized to NULL when the structure is
- *	allocated.
- *	@sb contains the super_block structure to be modified.
- *	Return 0 if operation was successful.
- * @sb_free_security:
- *	Deallocate and clear the sb->s_security field.
- *	@sb contains the super_block structure to be modified.
- * @sb_statfs:
- *	Check permission before obtaining filesystem statistics for the @mnt
- *	mountpoint.
- *	@dentry is a handle on the superblock for the filesystem.
- *	Return 0 if permission is granted.
- * @sb_mount:
- *	Check permission before an object specified by @dev_name is mounted on
- *	the mount point named by @nd.  For an ordinary mount, @dev_name
- *	identifies a device if the file system type requires a device.  For a
- *	remount (@flags & MS_REMOUNT), @dev_name is irrelevant.  For a
- *	loopback/bind mount (@flags & MS_BIND), @dev_name identifies the
- *	pathname of the object being mounted.
- *	@dev_name contains the name for object being mounted.
- *	@path contains the path for mount point object.
- *	@type contains the filesystem type.
- *	@flags contains the mount flags.
- *	@data contains the filesystem-specific data.
- *	Return 0 if permission is granted.
- * @sb_copy_data:
- *	Allow mount option data to be copied prior to parsing by the filesystem,
- *	so that the security module can extract security-specific mount
- *	options cleanly (a filesystem may modify the data e.g. with strsep()).
- *	This also allows the original mount data to be stripped of security-
- *	specific options to avoid having to make filesystems aware of them.
- *	@type the type of filesystem being mounted.
- *	@orig the original mount data copied from userspace.
- *	@copy copied data which will be passed to the security module.
- *	Returns 0 if the copy was successful.
- * @sb_remount:
- *	Extracts security system specific mount options and verifies no changes
- *	are being made to those options.
- *	@sb superblock being remounted
- *	@data contains the filesystem-specific data.
- *	Return 0 if permission is granted.
- * @sb_umount:
- *	Check permission before the @mnt file system is unmounted.
- *	@mnt contains the mounted file system.
- *	@flags contains the unmount flags, e.g. MNT_FORCE.
- *	Return 0 if permission is granted.
- * @sb_pivotroot:
- *	Check permission before pivoting the root filesystem.
- *	@old_path contains the path for the new location of the current root (put_old).
- *	@new_path contains the path for the new root (new_root).
- *	Return 0 if permission is granted.
- * @sb_set_mnt_opts:
- *	Set the security relevant mount options used for a superblock
- *	@sb the superblock to set security mount options for
- *	@opts binary data structure containing all lsm mount data
- * @sb_clone_mnt_opts:
- *	Copy all security options from a given superblock to another
- *	@oldsb old superblock which contain information to clone
- *	@newsb new superblock which needs filled in
- * @sb_parse_opts_str:
- *	Parse a string of security data filling in the opts structure
- *	@options string containing all mount options known by the LSM
- *	@opts binary data structure usable by the LSM
- *
- * Security hooks for inode operations.
- *
- * @inode_alloc_security:
- *	Allocate and attach a security structure to @inode->i_security.  The
- *	i_security field is initialized to NULL when the inode structure is
- *	allocated.
- *	@inode contains the inode structure.
- *	Return 0 if operation was successful.
- * @inode_free_security:
- *	@inode contains the inode structure.
- *	Deallocate the inode security structure and set @inode->i_security to
- *	NULL.
- * @inode_init_security:
- *	Obtain the security attribute name suffix and value to set on a newly
- *	created inode and set up the incore security field for the new inode.
- *	This hook is called by the fs code as part of the inode creation
- *	transaction and provides for atomic labeling of the inode, unlike
- *	the post_create/mkdir/... hooks called by the VFS.  The hook function
- *	is expected to allocate the name and value via kmalloc, with the caller
- *	being responsible for calling kfree after using them.
- *	If the security module does not use security attributes or does
- *	not wish to put a security attribute on this particular inode,
- *	then it should return -EOPNOTSUPP to skip this processing.
- *	@inode contains the inode structure of the newly created inode.
- *	@dir contains the inode structure of the parent directory.
- *	@qstr contains the last path component of the new object
- *	@name will be set to the allocated name suffix (e.g. selinux).
- *	@value will be set to the allocated attribute value.
- *	@len will be set to the length of the value.
- *	Returns 0 if @name and @value have been successfully set,
- *		-EOPNOTSUPP if no security attribute is needed, or
- *		-ENOMEM on memory allocation failure.
- * @inode_create:
- *	Check permission to create a regular file.
- *	@dir contains inode structure of the parent of the new file.
- *	@dentry contains the dentry structure for the file to be created.
- *	@mode contains the file mode of the file to be created.
- *	Return 0 if permission is granted.
- * @inode_link:
- *	Check permission before creating a new hard link to a file.
- *	@old_dentry contains the dentry structure for an existing link to the file.
- *	@dir contains the inode structure of the parent directory of the new link.
- *	@new_dentry contains the dentry structure for the new link.
- *	Return 0 if permission is granted.
- * @path_link:
- *	Check permission before creating a new hard link to a file.
- *	@old_dentry contains the dentry structure for an existing link
- *	to the file.
- *	@new_dir contains the path structure of the parent directory of
- *	the new link.
- *	@new_dentry contains the dentry structure for the new link.
- *	Return 0 if permission is granted.
- * @inode_unlink:
- *	Check the permission to remove a hard link to a file.
- *	@dir contains the inode structure of parent directory of the file.
- *	@dentry contains the dentry structure for file to be unlinked.
- *	Return 0 if permission is granted.
- * @path_unlink:
- *	Check the permission to remove a hard link to a file.
- *	@dir contains the path structure of parent directory of the file.
- *	@dentry contains the dentry structure for file to be unlinked.
- *	Return 0 if permission is granted.
- * @inode_symlink:
- *	Check the permission to create a symbolic link to a file.
- *	@dir contains the inode structure of parent directory of the symbolic link.
- *	@dentry contains the dentry structure of the symbolic link.
- *	@old_name contains the pathname of file.
- *	Return 0 if permission is granted.
- * @path_symlink:
- *	Check the permission to create a symbolic link to a file.
- *	@dir contains the path structure of parent directory of
- *	the symbolic link.
- *	@dentry contains the dentry structure of the symbolic link.
- *	@old_name contains the pathname of file.
- *	Return 0 if permission is granted.
- * @inode_mkdir:
- *	Check permissions to create a new directory in the existing directory
- *	associated with inode structure @dir.
- *	@dir contains the inode structure of parent of the directory to be created.
- *	@dentry contains the dentry structure of new directory.
- *	@mode contains the mode of new directory.
- *	Return 0 if permission is granted.
- * @path_mkdir:
- *	Check permissions to create a new directory in the existing directory
- *	associated with path structure @path.
- *	@dir contains the path structure of parent of the directory
- *	to be created.
- *	@dentry contains the dentry structure of new directory.
- *	@mode contains the mode of new directory.
- *	Return 0 if permission is granted.
- * @inode_rmdir:
- *	Check the permission to remove a directory.
- *	@dir contains the inode structure of parent of the directory to be removed.
- *	@dentry contains the dentry structure of directory to be removed.
- *	Return 0 if permission is granted.
- * @path_rmdir:
- *	Check the permission to remove a directory.
- *	@dir contains the path structure of parent of the directory to be
- *	removed.
- *	@dentry contains the dentry structure of directory to be removed.
- *	Return 0 if permission is granted.
- * @inode_mknod:
- *	Check permissions when creating a special file (or a socket or a fifo
- *	file created via the mknod system call).  Note that if mknod operation
- *	is being done for a regular file, then the create hook will be called
- *	and not this hook.
- *	@dir contains the inode structure of parent of the new file.
- *	@dentry contains the dentry structure of the new file.
- *	@mode contains the mode of the new file.
- *	@dev contains the device number.
- *	Return 0 if permission is granted.
- * @path_mknod:
- *	Check permissions when creating a file. Note that this hook is called
- *	even if mknod operation is being done for a regular file.
- *	@dir contains the path structure of parent of the new file.
- *	@dentry contains the dentry structure of the new file.
- *	@mode contains the mode of the new file.
- *	@dev contains the undecoded device number. Use new_decode_dev() to get
- *	the decoded device number.
- *	Return 0 if permission is granted.
- * @inode_rename:
- *	Check for permission to rename a file or directory.
- *	@old_dir contains the inode structure for parent of the old link.
- *	@old_dentry contains the dentry structure of the old link.
- *	@new_dir contains the inode structure for parent of the new link.
- *	@new_dentry contains the dentry structure of the new link.
- *	Return 0 if permission is granted.
- * @path_rename:
- *	Check for permission to rename a file or directory.
- *	@old_dir contains the path structure for parent of the old link.
- *	@old_dentry contains the dentry structure of the old link.
- *	@new_dir contains the path structure for parent of the new link.
- *	@new_dentry contains the dentry structure of the new link.
- *	Return 0 if permission is granted.
- * @path_chmod:
- *	Check for permission to change DAC's permission of a file or directory.
- *	@dentry contains the dentry structure.
- *	@mnt contains the vfsmnt structure.
- *	@mode contains DAC's mode.
- *	Return 0 if permission is granted.
- * @path_chown:
- *	Check for permission to change owner/group of a file or directory.
- *	@path contains the path structure.
- *	@uid contains new owner's ID.
- *	@gid contains new group's ID.
- *	Return 0 if permission is granted.
- * @path_chroot:
- *	Check for permission to change root directory.
- *	@path contains the path structure.
- *	Return 0 if permission is granted.
- * @inode_readlink:
- *	Check the permission to read the symbolic link.
- *	@dentry contains the dentry structure for the file link.
- *	Return 0 if permission is granted.
- * @inode_follow_link:
- *	Check permission to follow a symbolic link when looking up a pathname.
- *	@dentry contains the dentry structure for the link.
- *	@nd contains the nameidata structure for the parent directory.
- *	Return 0 if permission is granted.
- * @inode_permission:
- *	Check permission before accessing an inode.  This hook is called by the
- *	existing Linux permission function, so a security module can use it to
- *	provide additional checking for existing Linux permission checks.
- *	Notice that this hook is called when a file is opened (as well as many
- *	other operations), whereas the file_security_ops permission hook is
- *	called when the actual read/write operations are performed.
- *	@inode contains the inode structure to check.
- *	@mask contains the permission mask.
- *	Return 0 if permission is granted.
- * @inode_setattr:
- *	Check permission before setting file attributes.  Note that the kernel
- *	call to notify_change is performed from several locations, whenever
- *	file attributes change (such as when a file is truncated, chown/chmod
- *	operations, transferring disk quotas, etc).
- *	@dentry contains the dentry structure for the file.
- *	@attr is the iattr structure containing the new file attributes.
- *	Return 0 if permission is granted.
- * @path_truncate:
- *	Check permission before truncating a file.
- *	@path contains the path structure for the file.
- *	Return 0 if permission is granted.
- * @inode_getattr:
- *	Check permission before obtaining file attributes.
- *	@mnt is the vfsmount where the dentry was looked up
- *	@dentry contains the dentry structure for the file.
- *	Return 0 if permission is granted.
- * @inode_setxattr:
- *	Check permission before setting the extended attributes
- *	@value identified by @name for @dentry.
- *	Return 0 if permission is granted.
- * @inode_post_setxattr:
- *	Update inode security field after successful setxattr operation.
- *	@value identified by @name for @dentry.
- * @inode_getxattr:
- *	Check permission before obtaining the extended attributes
- *	identified by @name for @dentry.
- *	Return 0 if permission is granted.
- * @inode_listxattr:
- *	Check permission before obtaining the list of extended attribute
- *	names for @dentry.
- *	Return 0 if permission is granted.
- * @inode_removexattr:
- *	Check permission before removing the extended attribute
- *	identified by @name for @dentry.
- *	Return 0 if permission is granted.
- * @inode_getsecurity:
- *	Retrieve a copy of the extended attribute representation of the
- *	security label associated with @name for @inode via @buffer.  Note that
- *	@name is the remainder of the attribute name after the security prefix
- *	has been removed. @alloc is used to specify of the call should return a
- *	value via the buffer or just the value length Return size of buffer on
- *	success.
- * @inode_setsecurity:
- *	Set the security label associated with @name for @inode from the
- *	extended attribute value @value.  @size indicates the size of the
- *	@value in bytes.  @flags may be XATTR_CREATE, XATTR_REPLACE, or 0.
- *	Note that @name is the remainder of the attribute name after the
- *	security. prefix has been removed.
- *	Return 0 on success.
- * @inode_listsecurity:
- *	Copy the extended attribute names for the security labels
- *	associated with @inode into @buffer.  The maximum size of @buffer
- *	is specified by @buffer_size.  @buffer may be NULL to request
- *	the size of the buffer required.
- *	Returns number of bytes used/required on success.
- * @inode_need_killpriv:
- *	Called when an inode has been changed.
- *	@dentry is the dentry being changed.
- *	Return <0 on error to abort the inode change operation.
- *	Return 0 if inode_killpriv does not need to be called.
- *	Return >0 if inode_killpriv does need to be called.
- * @inode_killpriv:
- *	The setuid bit is being removed.  Remove similar security labels.
- *	Called with the dentry->d_inode->i_mutex held.
- *	@dentry is the dentry being changed.
- *	Return 0 on success.  If error is returned, then the operation
- *	causing setuid bit removal is failed.
- * @inode_getsecid:
- *	Get the secid associated with the node.
- *	@inode contains a pointer to the inode.
- *	@secid contains a pointer to the location where result will be saved.
- *	In case of failure, @secid will be set to zero.
- *
- * Security hooks for file operations
- *
- * @file_permission:
- *	Check file permissions before accessing an open file.  This hook is
- *	called by various operations that read or write files.  A security
- *	module can use this hook to perform additional checking on these
- *	operations, e.g.  to revalidate permissions on use to support privilege
- *	bracketing or policy changes.  Notice that this hook is used when the
- *	actual read/write operations are performed, whereas the
- *	inode_security_ops hook is called when a file is opened (as well as
- *	many other operations).
- *	Caveat:  Although this hook can be used to revalidate permissions for
- *	various system call operations that read or write files, it does not
- *	address the revalidation of permissions for memory-mapped files.
- *	Security modules must handle this separately if they need such
- *	revalidation.
- *	@file contains the file structure being accessed.
- *	@mask contains the requested permissions.
- *	Return 0 if permission is granted.
- * @file_alloc_security:
- *	Allocate and attach a security structure to the file->f_security field.
- *	The security field is initialized to NULL when the structure is first
- *	created.
- *	@file contains the file structure to secure.
- *	Return 0 if the hook is successful and permission is granted.
- * @file_free_security:
- *	Deallocate and free any security structures stored in file->f_security.
- *	@file contains the file structure being modified.
- * @file_ioctl:
- *	@file contains the file structure.
- *	@cmd contains the operation to perform.
- *	@arg contains the operational arguments.
- *	Check permission for an ioctl operation on @file.  Note that @arg
- *	sometimes represents a user space pointer; in other cases, it may be a
- *	simple integer value.  When @arg represents a user space pointer, it
- *	should never be used by the security module.
- *	Return 0 if permission is granted.
- * @file_mmap :
- *	Check permissions for a mmap operation.  The @file may be NULL, e.g.
- *	if mapping anonymous memory.
- *	@file contains the file structure for file to map (may be NULL).
- *	@reqprot contains the protection requested by the application.
- *	@prot contains the protection that will be applied by the kernel.
- *	@flags contains the operational flags.
- *	@addr contains virtual address that will be used for the operation.
- *	@addr_only contains a boolean: 0 if file-backed VMA, otherwise 1.
- *	Return 0 if permission is granted.
- * @file_mprotect:
- *	Check permissions before changing memory access permissions.
- *	@vma contains the memory region to modify.
- *	@reqprot contains the protection requested by the application.
- *	@prot contains the protection that will be applied by the kernel.
- *	Return 0 if permission is granted.
- * @file_lock:
- *	Check permission before performing file locking operations.
- *	Note: this hook mediates both flock and fcntl style locks.
- *	@file contains the file structure.
- *	@cmd contains the posix-translated lock operation to perform
- *	(e.g. F_RDLCK, F_WRLCK).
- *	Return 0 if permission is granted.
- * @file_fcntl:
- *	Check permission before allowing the file operation specified by @cmd
- *	from being performed on the file @file.  Note that @arg sometimes
- *	represents a user space pointer; in other cases, it may be a simple
- *	integer value.  When @arg represents a user space pointer, it should
- *	never be used by the security module.
- *	@file contains the file structure.
- *	@cmd contains the operation to be performed.
- *	@arg contains the operational arguments.
- *	Return 0 if permission is granted.
- * @file_set_fowner:
- *	Save owner security information (typically from current->security) in
- *	file->f_security for later use by the send_sigiotask hook.
- *	@file contains the file structure to update.
- *	Return 0 on success.
- * @file_send_sigiotask:
- *	Check permission for the file owner @fown to send SIGIO or SIGURG to the
- *	process @tsk.  Note that this hook is sometimes called from interrupt.
- *	Note that the fown_struct, @fown, is never outside the context of a
- *	struct file, so the file structure (and associated security information)
- *	can always be obtained:
- *		container_of(fown, struct file, f_owner)
- *	@tsk contains the structure of task receiving signal.
- *	@fown contains the file owner information.
- *	@sig is the signal that will be sent.  When 0, kernel sends SIGIO.
- *	Return 0 if permission is granted.
- * @file_receive:
- *	This hook allows security modules to control the ability of a process
- *	to receive an open file descriptor via socket IPC.
- *	@file contains the file structure being received.
- *	Return 0 if permission is granted.
- *
- * Security hook for dentry
- *
- * @dentry_open
- *	Save open-time permission checking state for later use upon
- *	file_permission, and recheck access if anything has changed
- *	since inode_permission.
- *
- * Security hooks for task operations.
- *
- * @task_create:
- *	Check permission before creating a child process.  See the clone(2)
- *	manual page for definitions of the @clone_flags.
- *	@clone_flags contains the flags indicating what should be shared.
- *	Return 0 if permission is granted.
- * @task_free:
- *	@task task being freed
- *	Handle release of task-related resources. (Note that this can be called
- *	from interrupt context.)
- * @cred_alloc_blank:
- *	@cred points to the credentials.
- *	@gfp indicates the atomicity of any memory allocations.
- *	Only allocate sufficient memory and attach to @cred such that
- *	cred_transfer() will not get ENOMEM.
- * @cred_free:
- *	@cred points to the credentials.
- *	Deallocate and clear the cred->security field in a set of credentials.
- * @cred_prepare:
- *	@new points to the new credentials.
- *	@old points to the original credentials.
- *	@gfp indicates the atomicity of any memory allocations.
- *	Prepare a new set of credentials by copying the data from the old set.
- * @cred_transfer:
- *	@new points to the new credentials.
- *	@old points to the original credentials.
- *	Transfer data from original creds to new creds
- * @kernel_act_as:
- *	Set the credentials for a kernel service to act as (subjective context).
- *	@new points to the credentials to be modified.
- *	@secid specifies the security ID to be set
- *	The current task must be the one that nominated @secid.
- *	Return 0 if successful.
- * @kernel_create_files_as:
- *	Set the file creation context in a set of credentials to be the same as
- *	the objective context of the specified inode.
- *	@new points to the credentials to be modified.
- *	@inode points to the inode to use as a reference.
- *	The current task must be the one that nominated @inode.
- *	Return 0 if successful.
- * @kernel_module_request:
- *	Ability to trigger the kernel to automatically upcall to userspace for
- *	userspace to load a kernel module with the given name.
- *	@kmod_name name of the module requested by the kernel
- *	Return 0 if successful.
- * @task_fix_setuid:
- *	Update the module's state after setting one or more of the user
- *	identity attributes of the current process.  The @flags parameter
- *	indicates which of the set*uid system calls invoked this hook.  If
- *	@new is the set of credentials that will be installed.  Modifications
- *	should be made to this rather than to @current->cred.
- *	@old is the set of credentials that are being replaces
- *	@flags contains one of the LSM_SETID_* values.
- *	Return 0 on success.
- * @task_setpgid:
- *	Check permission before setting the process group identifier of the
- *	process @p to @pgid.
- *	@p contains the task_struct for process being modified.
- *	@pgid contains the new pgid.
- *	Return 0 if permission is granted.
- * @task_getpgid:
- *	Check permission before getting the process group identifier of the
- *	process @p.
- *	@p contains the task_struct for the process.
- *	Return 0 if permission is granted.
- * @task_getsid:
- *	Check permission before getting the session identifier of the process
- *	@p.
- *	@p contains the task_struct for the process.
- *	Return 0 if permission is granted.
- * @task_getsecid:
- *	Retrieve the security identifier of the process @p.
- *	@p contains the task_struct for the process and place is into @secid.
- *	In case of failure, @secid will be set to zero.
- *
- * @task_setnice:
- *	Check permission before setting the nice value of @p to @nice.
- *	@p contains the task_struct of process.
- *	@nice contains the new nice value.
- *	Return 0 if permission is granted.
- * @task_setioprio
- *	Check permission before setting the ioprio value of @p to @ioprio.
- *	@p contains the task_struct of process.
- *	@ioprio contains the new ioprio value
- *	Return 0 if permission is granted.
- * @task_getioprio
- *	Check permission before getting the ioprio value of @p.
- *	@p contains the task_struct of process.
- *	Return 0 if permission is granted.
- * @task_setrlimit:
- *	Check permission before setting the resource limits of the current
- *	process for @resource to @new_rlim.  The old resource limit values can
- *	be examined by dereferencing (current->signal->rlim + resource).
- *	@resource contains the resource whose limit is being set.
- *	@new_rlim contains the new limits for @resource.
- *	Return 0 if permission is granted.
- * @task_setscheduler:
- *	Check permission before setting scheduling policy and/or parameters of
- *	process @p based on @policy and @lp.
- *	@p contains the task_struct for process.
- *	@policy contains the scheduling policy.
- *	@lp contains the scheduling parameters.
- *	Return 0 if permission is granted.
- * @task_getscheduler:
- *	Check permission before obtaining scheduling information for process
- *	@p.
- *	@p contains the task_struct for process.
- *	Return 0 if permission is granted.
- * @task_movememory
- *	Check permission before moving memory owned by process @p.
- *	@p contains the task_struct for process.
- *	Return 0 if permission is granted.
- * @task_kill:
- *	Check permission before sending signal @sig to @p.  @info can be NULL,
- *	the constant 1, or a pointer to a siginfo structure.  If @info is 1 or
- *	SI_FROMKERNEL(info) is true, then the signal should be viewed as coming
- *	from the kernel and should typically be permitted.
- *	SIGIO signals are handled separately by the send_sigiotask hook in
- *	file_security_ops.
- *	@p contains the task_struct for process.
- *	@info contains the signal information.
- *	@sig contains the signal value.
- *	@secid contains the sid of the process where the signal originated
- *	Return 0 if permission is granted.
- * @task_wait:
- *	Check permission before allowing a process to reap a child process @p
- *	and collect its status information.
- *	@p contains the task_struct for process.
- *	Return 0 if permission is granted.
- * @task_prctl:
- *	Check permission before performing a process control operation on the
- *	current process.
- *	@option contains the operation.
- *	@arg2 contains a argument.
- *	@arg3 contains a argument.
- *	@arg4 contains a argument.
- *	@arg5 contains a argument.
- *	Return -ENOSYS if no-one wanted to handle this op, any other value to
- *	cause prctl() to return immediately with that value.
- * @task_to_inode:
- *	Set the security attributes for an inode based on an associated task's
- *	security attributes, e.g. for /proc/pid inodes.
- *	@p contains the task_struct for the task.
- *	@inode contains the inode structure for the inode.
- *
- * Security hooks for Netlink messaging.
- *
- * @netlink_send:
- *	Save security information for a netlink message so that permission
- *	checking can be performed when the message is processed.  The security
- *	information can be saved using the eff_cap field of the
- *	netlink_skb_parms structure.  Also may be used to provide fine
- *	grained control over message transmission.
- *	@sk associated sock of task sending the message.
- *	@skb contains the sk_buff structure for the netlink message.
- *	Return 0 if the information was successfully saved and message
- *	is allowed to be transmitted.
- *
- * Security hooks for Unix domain networking.
- *
- * @unix_stream_connect:
- *	Check permissions before establishing a Unix domain stream connection
- *	between @sock and @other.
- *	@sock contains the sock structure.
- *	@other contains the peer sock structure.
- *	@newsk contains the new sock structure.
- *	Return 0 if permission is granted.
- * @unix_may_send:
- *	Check permissions before connecting or sending datagrams from @sock to
- *	@other.
- *	@sock contains the socket structure.
- *	@other contains the peer socket structure.
- *	Return 0 if permission is granted.
- *
- * The @unix_stream_connect and @unix_may_send hooks were necessary because
- * Linux provides an alternative to the conventional file name space for Unix
- * domain sockets.  Whereas binding and connecting to sockets in the file name
- * space is mediated by the typical file permissions (and caught by the mknod
- * and permission hooks in inode_security_ops), binding and connecting to
- * sockets in the abstract name space is completely unmediated.  Sufficient
- * control of Unix domain sockets in the abstract name space isn't possible
- * using only the socket layer hooks, since we need to know the actual target
- * socket, which is not looked up until we are inside the af_unix code.
- *
- * Security hooks for socket operations.
- *
- * @socket_create:
- *	Check permissions prior to creating a new socket.
- *	@family contains the requested protocol family.
- *	@type contains the requested communications type.
- *	@protocol contains the requested protocol.
- *	@kern set to 1 if a kernel socket.
- *	Return 0 if permission is granted.
- * @socket_post_create:
- *	This hook allows a module to update or allocate a per-socket security
- *	structure. Note that the security field was not added directly to the
- *	socket structure, but rather, the socket security information is stored
- *	in the associated inode.  Typically, the inode alloc_security hook will
- *	allocate and and attach security information to
- *	sock->inode->i_security.  This hook may be used to update the
- *	sock->inode->i_security field with additional information that wasn't
- *	available when the inode was allocated.
- *	@sock contains the newly created socket structure.
- *	@family contains the requested protocol family.
- *	@type contains the requested communications type.
- *	@protocol contains the requested protocol.
- *	@kern set to 1 if a kernel socket.
- * @socket_bind:
- *	Check permission before socket protocol layer bind operation is
- *	performed and the socket @sock is bound to the address specified in the
- *	@address parameter.
- *	@sock contains the socket structure.
- *	@address contains the address to bind to.
- *	@addrlen contains the length of address.
- *	Return 0 if permission is granted.
- * @socket_connect:
- *	Check permission before socket protocol layer connect operation
- *	attempts to connect socket @sock to a remote address, @address.
- *	@sock contains the socket structure.
- *	@address contains the address of remote endpoint.
- *	@addrlen contains the length of address.
- *	Return 0 if permission is granted.
- * @socket_listen:
- *	Check permission before socket protocol layer listen operation.
- *	@sock contains the socket structure.
- *	@backlog contains the maximum length for the pending connection queue.
- *	Return 0 if permission is granted.
- * @socket_accept:
- *	Check permission before accepting a new connection.  Note that the new
- *	socket, @newsock, has been created and some information copied to it,
- *	but the accept operation has not actually been performed.
- *	@sock contains the listening socket structure.
- *	@newsock contains the newly created server socket for connection.
- *	Return 0 if permission is granted.
- * @socket_sendmsg:
- *	Check permission before transmitting a message to another socket.
- *	@sock contains the socket structure.
- *	@msg contains the message to be transmitted.
- *	@size contains the size of message.
- *	Return 0 if permission is granted.
- * @socket_recvmsg:
- *	Check permission before receiving a message from a socket.
- *	@sock contains the socket structure.
- *	@msg contains the message structure.
- *	@size contains the size of message structure.
- *	@flags contains the operational flags.
- *	Return 0 if permission is granted.
- * @socket_getsockname:
- *	Check permission before the local address (name) of the socket object
- *	@sock is retrieved.
- *	@sock contains the socket structure.
- *	Return 0 if permission is granted.
- * @socket_getpeername:
- *	Check permission before the remote address (name) of a socket object
- *	@sock is retrieved.
- *	@sock contains the socket structure.
- *	Return 0 if permission is granted.
- * @socket_getsockopt:
- *	Check permissions before retrieving the options associated with socket
- *	@sock.
- *	@sock contains the socket structure.
- *	@level contains the protocol level to retrieve option from.
- *	@optname contains the name of option to retrieve.
- *	Return 0 if permission is granted.
- * @socket_setsockopt:
- *	Check permissions before setting the options associated with socket
- *	@sock.
- *	@sock contains the socket structure.
- *	@level contains the protocol level to set options for.
- *	@optname contains the name of the option to set.
- *	Return 0 if permission is granted.
- * @socket_shutdown:
- *	Checks permission before all or part of a connection on the socket
- *	@sock is shut down.
- *	@sock contains the socket structure.
- *	@how contains the flag indicating how future sends and receives are handled.
- *	Return 0 if permission is granted.
- * @socket_sock_rcv_skb:
- *	Check permissions on incoming network packets.  This hook is distinct
- *	from Netfilter's IP input hooks since it is the first time that the
- *	incoming sk_buff @skb has been associated with a particular socket, @sk.
- *	Must not sleep inside this hook because some callers hold spinlocks.
- *	@sk contains the sock (not socket) associated with the incoming sk_buff.
- *	@skb contains the incoming network data.
- * @socket_getpeersec_stream:
- *	This hook allows the security module to provide peer socket security
- *	state for unix or connected tcp sockets to userspace via getsockopt
- *	SO_GETPEERSEC.  For tcp sockets this can be meaningful if the
- *	socket is associated with an ipsec SA.
- *	@sock is the local socket.
- *	@optval userspace memory where the security state is to be copied.
- *	@optlen userspace int where the module should copy the actual length
- *	of the security state.
- *	@len as input is the maximum length to copy to userspace provided
- *	by the caller.
- *	Return 0 if all is well, otherwise, typical getsockopt return
- *	values.
- * @socket_getpeersec_dgram:
- *	This hook allows the security module to provide peer socket security
- *	state for udp sockets on a per-packet basis to userspace via
- *	getsockopt SO_GETPEERSEC.  The application must first have indicated
- *	the IP_PASSSEC option via getsockopt.  It can then retrieve the
- *	security state returned by this hook for a packet via the SCM_SECURITY
- *	ancillary message type.
- *	@skb is the skbuff for the packet being queried
- *	@secdata is a pointer to a buffer in which to copy the security data
- *	@seclen is the maximum length for @secdata
- *	Return 0 on success, error on failure.
- * @sk_alloc_security:
- *	Allocate and attach a security structure to the sk->sk_security field,
- *	which is used to copy security attributes between local stream sockets.
- * @sk_free_security:
- *	Deallocate security structure.
- * @sk_clone_security:
- *	Clone/copy security structure.
- * @sk_getsecid:
- *	Retrieve the LSM-specific secid for the sock to enable caching of network
- *	authorizations.
- * @sock_graft:
- *	Sets the socket's isec sid to the sock's sid.
- * @inet_conn_request:
- *	Sets the openreq's sid to socket's sid with MLS portion taken from peer sid.
- * @inet_csk_clone:
- *	Sets the new child socket's sid to the openreq sid.
- * @inet_conn_established:
- *	Sets the connection's peersid to the secmark on skb.
- * @secmark_relabel_packet:
- *	check if the process should be allowed to relabel packets to the given secid
- * @security_secmark_refcount_inc
- *	tells the LSM to increment the number of secmark labeling rules loaded
- * @security_secmark_refcount_dec
- *	tells the LSM to decrement the number of secmark labeling rules loaded
- * @req_classify_flow:
- *	Sets the flow's sid to the openreq sid.
- * @tun_dev_create:
- *	Check permissions prior to creating a new TUN device.
- * @tun_dev_post_create:
- *	This hook allows a module to update or allocate a per-socket security
- *	structure.
- *	@sk contains the newly created sock structure.
- * @tun_dev_attach:
- *	Check permissions prior to attaching to a persistent TUN device.  This
- *	hook can also be used by the module to update any security state
- *	associated with the TUN device's sock structure.
- *	@sk contains the existing sock structure.
- *
- * Security hooks for XFRM operations.
- *
- * @xfrm_policy_alloc_security:
- *	@ctxp is a pointer to the xfrm_sec_ctx being added to Security Policy
- *	Database used by the XFRM system.
- *	@sec_ctx contains the security context information being provided by
- *	the user-level policy update program (e.g., setkey).
- *	Allocate a security structure to the xp->security field; the security
- *	field is initialized to NULL when the xfrm_policy is allocated.
- *	Return 0 if operation was successful (memory to allocate, legal context)
- * @xfrm_policy_clone_security:
- *	@old_ctx contains an existing xfrm_sec_ctx.
- *	@new_ctxp contains a new xfrm_sec_ctx being cloned from old.
- *	Allocate a security structure in new_ctxp that contains the
- *	information from the old_ctx structure.
- *	Return 0 if operation was successful (memory to allocate).
- * @xfrm_policy_free_security:
- *	@ctx contains the xfrm_sec_ctx
- *	Deallocate xp->security.
- * @xfrm_policy_delete_security:
- *	@ctx contains the xfrm_sec_ctx.
- *	Authorize deletion of xp->security.
- * @xfrm_state_alloc_security:
- *	@x contains the xfrm_state being added to the Security Association
- *	Database by the XFRM system.
- *	@sec_ctx contains the security context information being provided by
- *	the user-level SA generation program (e.g., setkey or racoon).
- *	@secid contains the secid from which to take the mls portion of the context.
- *	Allocate a security structure to the x->security field; the security
- *	field is initialized to NULL when the xfrm_state is allocated. Set the
- *	context to correspond to either sec_ctx or polsec, with the mls portion
- *	taken from secid in the latter case.
- *	Return 0 if operation was successful (memory to allocate, legal context).
- * @xfrm_state_free_security:
- *	@x contains the xfrm_state.
- *	Deallocate x->security.
- * @xfrm_state_delete_security:
- *	@x contains the xfrm_state.
- *	Authorize deletion of x->security.
- * @xfrm_policy_lookup:
- *	@ctx contains the xfrm_sec_ctx for which the access control is being
- *	checked.
- *	@fl_secid contains the flow security label that is used to authorize
- *	access to the policy xp.
- *	@dir contains the direction of the flow (input or output).
- *	Check permission when a flow selects a xfrm_policy for processing
- *	XFRMs on a packet.  The hook is called when selecting either a
- *	per-socket policy or a generic xfrm policy.
- *	Return 0 if permission is granted, -ESRCH otherwise, or -errno
- *	on other errors.
- * @xfrm_state_pol_flow_match:
- *	@x contains the state to match.
- *	@xp contains the policy to check for a match.
- *	@fl contains the flow to check for a match.
- *	Return 1 if there is a match.
- * @xfrm_decode_session:
- *	@skb points to skb to decode.
- *	@secid points to the flow key secid to set.
- *	@ckall says if all xfrms used should be checked for same secid.
- *	Return 0 if ckall is zero or all xfrms used have the same secid.
- *
- * Security hooks affecting all Key Management operations
- *
- * @key_alloc:
- *	Permit allocation of a key and assign security data. Note that key does
- *	not have a serial number assigned at this point.
- *	@key points to the key.
- *	@flags is the allocation flags
- *	Return 0 if permission is granted, -ve error otherwise.
- * @key_free:
- *	Notification of destruction; free security data.
- *	@key points to the key.
- *	No return value.
- * @key_permission:
- *	See whether a specific operational right is granted to a process on a
- *	key.
- *	@key_ref refers to the key (key pointer + possession attribute bit).
- *	@cred points to the credentials to provide the context against which to
- *	evaluate the security data on the key.
- *	@perm describes the combination of permissions required of this key.
- *	Return 0 if permission is granted, -ve error otherwise.
- * @key_getsecurity:
- *	Get a textual representation of the security context attached to a key
- *	for the purposes of honouring KEYCTL_GETSECURITY.  This function
- *	allocates the storage for the NUL-terminated string and the caller
- *	should free it.
- *	@key points to the key to be queried.
- *	@_buffer points to a pointer that should be set to point to the
- *	resulting string (if no label or an error occurs).
- *	Return the length of the string (including terminating NUL) or -ve if
- *	an error.
- *	May also return 0 (and a NULL buffer pointer) if there is no label.
- *
- * Security hooks affecting all System V IPC operations.
- *
- * @ipc_permission:
- *	Check permissions for access to IPC
- *	@ipcp contains the kernel IPC permission structure
- *	@flag contains the desired (requested) permission set
- *	Return 0 if permission is granted.
- * @ipc_getsecid:
- *	Get the secid associated with the ipc object.
- *	@ipcp contains the kernel IPC permission structure.
- *	@secid contains a pointer to the location where result will be saved.
- *	In case of failure, @secid will be set to zero.
- *
- * Security hooks for individual messages held in System V IPC message queues
- * @msg_msg_alloc_security:
- *	Allocate and attach a security structure to the msg->security field.
- *	The security field is initialized to NULL when the structure is first
- *	created.
- *	@msg contains the message structure to be modified.
- *	Return 0 if operation was successful and permission is granted.
- * @msg_msg_free_security:
- *	Deallocate the security structure for this message.
- *	@msg contains the message structure to be modified.
- *
- * Security hooks for System V IPC Message Queues
- *
- * @msg_queue_alloc_security:
- *	Allocate and attach a security structure to the
- *	msq->q_perm.security field. The security field is initialized to
- *	NULL when the structure is first created.
- *	@msq contains the message queue structure to be modified.
- *	Return 0 if operation was successful and permission is granted.
- * @msg_queue_free_security:
- *	Deallocate security structure for this message queue.
- *	@msq contains the message queue structure to be modified.
- * @msg_queue_associate:
- *	Check permission when a message queue is requested through the
- *	msgget system call.  This hook is only called when returning the
- *	message queue identifier for an existing message queue, not when a
- *	new message queue is created.
- *	@msq contains the message queue to act upon.
- *	@msqflg contains the operation control flags.
- *	Return 0 if permission is granted.
- * @msg_queue_msgctl:
- *	Check permission when a message control operation specified by @cmd
- *	is to be performed on the message queue @msq.
- *	The @msq may be NULL, e.g. for IPC_INFO or MSG_INFO.
- *	@msq contains the message queue to act upon.  May be NULL.
- *	@cmd contains the operation to be performed.
- *	Return 0 if permission is granted.
- * @msg_queue_msgsnd:
- *	Check permission before a message, @msg, is enqueued on the message
- *	queue, @msq.
- *	@msq contains the message queue to send message to.
- *	@msg contains the message to be enqueued.
- *	@msqflg contains operational flags.
- *	Return 0 if permission is granted.
- * @msg_queue_msgrcv:
- *	Check permission before a message, @msg, is removed from the message
- *	queue, @msq.  The @target task structure contains a pointer to the
- *	process that will be receiving the message (not equal to the current
- *	process when inline receives are being performed).
- *	@msq contains the message queue to retrieve message from.
- *	@msg contains the message destination.
- *	@target contains the task structure for recipient process.
- *	@type contains the type of message requested.
- *	@mode contains the operational flags.
- *	Return 0 if permission is granted.
- *
- * Security hooks for System V Shared Memory Segments
- *
- * @shm_alloc_security:
- *	Allocate and attach a security structure to the shp->shm_perm.security
- *	field.  The security field is initialized to NULL when the structure is
- *	first created.
- *	@shp contains the shared memory structure to be modified.
- *	Return 0 if operation was successful and permission is granted.
- * @shm_free_security:
- *	Deallocate the security struct for this memory segment.
- *	@shp contains the shared memory structure to be modified.
- * @shm_associate:
- *	Check permission when a shared memory region is requested through the
- *	shmget system call.  This hook is only called when returning the shared
- *	memory region identifier for an existing region, not when a new shared
- *	memory region is created.
- *	@shp contains the shared memory structure to be modified.
- *	@shmflg contains the operation control flags.
- *	Return 0 if permission is granted.
- * @shm_shmctl:
- *	Check permission when a shared memory control operation specified by
- *	@cmd is to be performed on the shared memory region @shp.
- *	The @shp may be NULL, e.g. for IPC_INFO or SHM_INFO.
- *	@shp contains shared memory structure to be modified.
- *	@cmd contains the operation to be performed.
- *	Return 0 if permission is granted.
- * @shm_shmat:
- *	Check permissions prior to allowing the shmat system call to attach the
- *	shared memory segment @shp to the data segment of the calling process.
- *	The attaching address is specified by @shmaddr.
- *	@shp contains the shared memory structure to be modified.
- *	@shmaddr contains the address to attach memory region to.
- *	@shmflg contains the operational flags.
- *	Return 0 if permission is granted.
- *
- * Security hooks for System V Semaphores
- *
- * @sem_alloc_security:
- *	Allocate and attach a security structure to the sma->sem_perm.security
- *	field.  The security field is initialized to NULL when the structure is
- *	first created.
- *	@sma contains the semaphore structure
- *	Return 0 if operation was successful and permission is granted.
- * @sem_free_security:
- *	deallocate security struct for this semaphore
- *	@sma contains the semaphore structure.
- * @sem_associate:
- *	Check permission when a semaphore is requested through the semget
- *	system call.  This hook is only called when returning the semaphore
- *	identifier for an existing semaphore, not when a new one must be
- *	created.
- *	@sma contains the semaphore structure.
- *	@semflg contains the operation control flags.
- *	Return 0 if permission is granted.
- * @sem_semctl:
- *	Check permission when a semaphore operation specified by @cmd is to be
- *	performed on the semaphore @sma.  The @sma may be NULL, e.g. for
- *	IPC_INFO or SEM_INFO.
- *	@sma contains the semaphore structure.  May be NULL.
- *	@cmd contains the operation to be performed.
- *	Return 0 if permission is granted.
- * @sem_semop
- *	Check permissions before performing operations on members of the
- *	semaphore set @sma.  If the @alter flag is nonzero, the semaphore set
- *	may be modified.
- *	@sma contains the semaphore structure.
- *	@sops contains the operations to perform.
- *	@nsops contains the number of operations to perform.
- *	@alter contains the flag indicating whether changes are to be made.
- *	Return 0 if permission is granted.
- *
- * @ptrace_access_check:
- *	Check permission before allowing the current process to trace the
- *	@child process.
- *	Security modules may also want to perform a process tracing check
- *	during an execve in the set_security or apply_creds hooks of
- *	tracing check during an execve in the bprm_set_creds hook of
- *	binprm_security_ops if the process is being traced and its security
- *	attributes would be changed by the execve.
- *	@child contains the task_struct structure for the target process.
- *	@mode contains the PTRACE_MODE flags indicating the form of access.
- *	Return 0 if permission is granted.
- * @ptrace_traceme:
- *	Check that the @parent process has sufficient permission to trace the
- *	current process before allowing the current process to present itself
- *	to the @parent process for tracing.
- *	The parent process will still have to undergo the ptrace_access_check
- *	checks before it is allowed to trace this one.
- *	@parent contains the task_struct structure for debugger process.
- *	Return 0 if permission is granted.
- * @capget:
- *	Get the @effective, @inheritable, and @permitted capability sets for
- *	the @target process.  The hook may also perform permission checking to
- *	determine if the current process is allowed to see the capability sets
- *	of the @target process.
- *	@target contains the task_struct structure for target process.
- *	@effective contains the effective capability set.
- *	@inheritable contains the inheritable capability set.
- *	@permitted contains the permitted capability set.
- *	Return 0 if the capability sets were successfully obtained.
- * @capset:
- *	Set the @effective, @inheritable, and @permitted capability sets for
- *	the current process.
- *	@new contains the new credentials structure for target process.
- *	@old contains the current credentials structure for target process.
- *	@effective contains the effective capability set.
- *	@inheritable contains the inheritable capability set.
- *	@permitted contains the permitted capability set.
- *	Return 0 and update @new if permission is granted.
- * @capable:
- *	Check whether the @tsk process has the @cap capability in the indicated
- *	credentials.
- *	@cred contains the credentials to use.
- *	@ns contains the user namespace we want the capability in
- *	@cap contains the capability <include/linux/capability.h>.
- *	@audit: Whether to write an audit message or not
- *	Return 0 if the capability is granted for @tsk.
- * @syslog:
- *	Check permission before accessing the kernel message ring or changing
- *	logging to the console.
- *	See the syslog(2) manual page for an explanation of the @type values.
- *	@type contains the type of action.
- *	@from_file indicates the context of action (if it came from /proc).
- *	Return 0 if permission is granted.
- * @settime:
- *	Check permission to change the system time.
- *	struct timespec and timezone are defined in include/linux/time.h
- *	@ts contains new time
- *	@tz contains new timezone
- *	Return 0 if permission is granted.
- * @vm_enough_memory:
- *	Check permissions for allocating a new virtual mapping.
- *	@mm contains the mm struct it is being added to.
- *	@pages contains the number of pages.
- *	Return 0 if permission is granted.
- *
- * @secid_to_secctx:
- *	Convert secid to security context.  If secdata is NULL the length of
- *	the result will be returned in seclen, but no secdata will be returned.
- *	This does mean that the length could change between calls to check the
- *	length and the next call which actually allocates and returns the secdata.
- *	@secid contains the security ID.
- *	@secdata contains the pointer that stores the converted security context.
- *	@seclen pointer which contains the length of the data
- * @secctx_to_secid:
- *	Convert security context to secid.
- *	@secid contains the pointer to the generated security ID.
- *	@secdata contains the security context.
- *
- * @release_secctx:
- *	Release the security context.
- *	@secdata contains the security context.
- *	@seclen contains the length of the security context.
- *
- * Security hooks for Audit
- *
- * @audit_rule_init:
- *	Allocate and initialize an LSM audit rule structure.
- *	@field contains the required Audit action. Fields flags are defined in include/linux/audit.h
- *	@op contains the operator the rule uses.
- *	@rulestr contains the context where the rule will be applied to.
- *	@lsmrule contains a pointer to receive the result.
- *	Return 0 if @lsmrule has been successfully set,
- *	-EINVAL in case of an invalid rule.
- *
- * @audit_rule_known:
- *	Specifies whether given @rule contains any fields related to current LSM.
- *	@rule contains the audit rule of interest.
- *	Return 1 in case of relation found, 0 otherwise.
- *
- * @audit_rule_match:
- *	Determine if given @secid matches a rule previously approved
- *	by @audit_rule_known.
- *	@secid contains the security id in question.
- *	@field contains the field which relates to current LSM.
- *	@op contains the operator that will be used for matching.
- *	@rule points to the audit rule that will be checked against.
- *	@actx points to the audit context associated with the check.
- *	Return 1 if secid matches the rule, 0 if it does not, -ERRNO on failure.
- *
- * @audit_rule_free:
- *	Deallocate the LSM audit rule structure previously allocated by
- *	audit_rule_init.
- *	@rule contains the allocated rule
- *
- * @inode_notifysecctx:
- *	Notify the security module of what the security context of an inode
- *	should be.  Initializes the incore security context managed by the
- *	security module for this inode.  Example usage:  NFS client invokes
- *	this hook to initialize the security context in its incore inode to the
- *	value provided by the server for the file when the server returned the
- *	file's attributes to the client.
- *
- * 	Must be called with inode->i_mutex locked.
- *
- * 	@inode we wish to set the security context of.
- * 	@ctx contains the string which we wish to set in the inode.
- * 	@ctxlen contains the length of @ctx.
- *
- * @inode_setsecctx:
- * 	Change the security context of an inode.  Updates the
- * 	incore security context managed by the security module and invokes the
- * 	fs code as needed (via __vfs_setxattr_noperm) to update any backing
- * 	xattrs that represent the context.  Example usage:  NFS server invokes
- * 	this hook to change the security context in its incore inode and on the
- * 	backing filesystem to a value provided by the client on a SETATTR
- * 	operation.
- *
- * 	Must be called with inode->i_mutex locked.
- *
- * 	@dentry contains the inode we wish to set the security context of.
- * 	@ctx contains the string which we wish to set in the inode.
- * 	@ctxlen contains the length of @ctx.
- *
- * @inode_getsecctx:
- *	Returns a string containing all relevant security context information
- *
- * 	@inode we wish to get the security context of.
- *	@ctx is a pointer in which to place the allocated security context.
- *	@ctxlen points to the place to put the length of @ctx.
- * This is the main security structure.
- */
-struct security_operations {
-	char name[SECURITY_NAME_MAX + 1];
-
-	int (*ptrace_access_check) (struct task_struct *child, unsigned int mode);
-	int (*ptrace_traceme) (struct task_struct *parent);
-	int (*capget) (struct task_struct *target,
-		       kernel_cap_t *effective,
-		       kernel_cap_t *inheritable, kernel_cap_t *permitted);
-	int (*capset) (struct cred *new,
-		       const struct cred *old,
-		       const kernel_cap_t *effective,
-		       const kernel_cap_t *inheritable,
-		       const kernel_cap_t *permitted);
-	int (*capable) (const struct cred *cred, struct user_namespace *ns,
-			int cap, int audit);
-	int (*quotactl) (int cmds, int type, int id, struct super_block *sb);
-	int (*quota_on) (struct dentry *dentry);
-	int (*syslog) (int type);
-	int (*settime) (const struct timespec *ts, const struct timezone *tz);
-	int (*vm_enough_memory) (struct mm_struct *mm, long pages);
-
-	int (*bprm_set_creds) (struct linux_binprm *bprm);
-	int (*bprm_check_security) (struct linux_binprm *bprm);
-	int (*bprm_secureexec) (struct linux_binprm *bprm);
-	void (*bprm_committing_creds) (struct linux_binprm *bprm);
-	void (*bprm_committed_creds) (struct linux_binprm *bprm);
-
-	int (*sb_alloc_security) (struct super_block *sb);
-	void (*sb_free_security) (struct super_block *sb);
-	int (*sb_copy_data) (char *orig, char *copy);
-	int (*sb_remount) (struct super_block *sb, void *data);
-	int (*sb_kern_mount) (struct super_block *sb, int flags, void *data);
-	int (*sb_show_options) (struct seq_file *m, struct super_block *sb);
-	int (*sb_statfs) (struct dentry *dentry);
-	int (*sb_mount) (char *dev_name, struct path *path,
-			 char *type, unsigned long flags, void *data);
-	int (*sb_umount) (struct vfsmount *mnt, int flags);
-	int (*sb_pivotroot) (struct path *old_path,
-			     struct path *new_path);
-	int (*sb_set_mnt_opts) (struct super_block *sb,
-				struct security_mnt_opts *opts);
-	void (*sb_clone_mnt_opts) (const struct super_block *oldsb,
-				   struct super_block *newsb);
-	int (*sb_parse_opts_str) (char *options, struct security_mnt_opts *opts);
-
-#ifdef CONFIG_SECURITY_PATH
-	int (*path_unlink) (struct path *dir, struct dentry *dentry);
-	int (*path_mkdir) (struct path *dir, struct dentry *dentry, umode_t mode);
-	int (*path_rmdir) (struct path *dir, struct dentry *dentry);
-	int (*path_mknod) (struct path *dir, struct dentry *dentry, umode_t mode,
-			   unsigned int dev);
-	int (*path_truncate) (struct path *path);
-	int (*path_symlink) (struct path *dir, struct dentry *dentry,
-			     const char *old_name);
-	int (*path_link) (struct dentry *old_dentry, struct path *new_dir,
-			  struct dentry *new_dentry);
-	int (*path_rename) (struct path *old_dir, struct dentry *old_dentry,
-			    struct path *new_dir, struct dentry *new_dentry);
-	int (*path_chmod) (struct path *path, umode_t mode);
-	int (*path_chown) (struct path *path, uid_t uid, gid_t gid);
-	int (*path_chroot) (struct path *path);
-#endif
-
-	int (*inode_alloc_security) (struct inode *inode);
-	void (*inode_free_security) (struct inode *inode);
-	int (*inode_init_security) (struct inode *inode, struct inode *dir,
-				    const struct qstr *qstr, char **name,
-				    void **value, size_t *len);
-	int (*inode_create) (struct inode *dir,
-			     struct dentry *dentry, umode_t mode);
-	int (*inode_link) (struct dentry *old_dentry,
-			   struct inode *dir, struct dentry *new_dentry);
-	int (*inode_unlink) (struct inode *dir, struct dentry *dentry);
-	int (*inode_symlink) (struct inode *dir,
-			      struct dentry *dentry, const char *old_name);
-	int (*inode_mkdir) (struct inode *dir, struct dentry *dentry, umode_t mode);
-	int (*inode_rmdir) (struct inode *dir, struct dentry *dentry);
-	int (*inode_mknod) (struct inode *dir, struct dentry *dentry,
-			    umode_t mode, dev_t dev);
-	int (*inode_rename) (struct inode *old_dir, struct dentry *old_dentry,
-			     struct inode *new_dir, struct dentry *new_dentry);
-	int (*inode_readlink) (struct dentry *dentry);
-	int (*inode_follow_link) (struct dentry *dentry, struct nameidata *nd);
-	int (*inode_permission) (struct inode *inode, int mask);
-	int (*inode_setattr)	(struct dentry *dentry, struct iattr *attr);
-	int (*inode_getattr) (struct vfsmount *mnt, struct dentry *dentry);
-	int (*inode_setxattr) (struct dentry *dentry, const char *name,
-			       const void *value, size_t size, int flags);
-	void (*inode_post_setxattr) (struct dentry *dentry, const char *name,
-				     const void *value, size_t size, int flags);
-	int (*inode_getxattr) (struct dentry *dentry, const char *name);
-	int (*inode_listxattr) (struct dentry *dentry);
-	int (*inode_removexattr) (struct dentry *dentry, const char *name);
-	int (*inode_need_killpriv) (struct dentry *dentry);
-	int (*inode_killpriv) (struct dentry *dentry);
-	int (*inode_getsecurity) (const struct inode *inode, const char *name, void **buffer, bool alloc);
-	int (*inode_setsecurity) (struct inode *inode, const char *name, const void *value, size_t size, int flags);
-	int (*inode_listsecurity) (struct inode *inode, char *buffer, size_t buffer_size);
-	void (*inode_getsecid) (const struct inode *inode, u32 *secid);
-
-	int (*file_permission) (struct file *file, int mask);
-	int (*file_alloc_security) (struct file *file);
-	void (*file_free_security) (struct file *file);
-	int (*file_ioctl) (struct file *file, unsigned int cmd,
-			   unsigned long arg);
-	int (*file_mmap) (struct file *file,
-			  unsigned long reqprot, unsigned long prot,
-			  unsigned long flags, unsigned long addr,
-			  unsigned long addr_only);
-	int (*file_mprotect) (struct vm_area_struct *vma,
-			      unsigned long reqprot,
-			      unsigned long prot);
-	int (*file_lock) (struct file *file, unsigned int cmd);
-	int (*file_fcntl) (struct file *file, unsigned int cmd,
-			   unsigned long arg);
-	int (*file_set_fowner) (struct file *file);
-	int (*file_send_sigiotask) (struct task_struct *tsk,
-				    struct fown_struct *fown, int sig);
-	int (*file_receive) (struct file *file);
-	int (*dentry_open) (struct file *file, const struct cred *cred);
-
-	int (*task_create) (unsigned long clone_flags);
-	void (*task_free) (struct task_struct *task);
-	int (*cred_alloc_blank) (struct cred *cred, gfp_t gfp);
-	void (*cred_free) (struct cred *cred);
-	int (*cred_prepare)(struct cred *new, const struct cred *old,
-			    gfp_t gfp);
-	void (*cred_transfer)(struct cred *new, const struct cred *old);
-	int (*kernel_act_as)(struct cred *new, u32 secid);
-	int (*kernel_create_files_as)(struct cred *new, struct inode *inode);
-	int (*kernel_module_request)(char *kmod_name);
-	int (*task_fix_setuid) (struct cred *new, const struct cred *old,
-				int flags);
-	int (*task_setpgid) (struct task_struct *p, pid_t pgid);
-	int (*task_getpgid) (struct task_struct *p);
-	int (*task_getsid) (struct task_struct *p);
-	void (*task_getsecid) (struct task_struct *p, u32 *secid);
-	int (*task_setnice) (struct task_struct *p, int nice);
-	int (*task_setioprio) (struct task_struct *p, int ioprio);
-	int (*task_getioprio) (struct task_struct *p);
-	int (*task_setrlimit) (struct task_struct *p, unsigned int resource,
-			struct rlimit *new_rlim);
-	int (*task_setscheduler) (struct task_struct *p);
-	int (*task_getscheduler) (struct task_struct *p);
-	int (*task_movememory) (struct task_struct *p);
-	int (*task_kill) (struct task_struct *p,
-			  struct siginfo *info, int sig, u32 secid);
-	int (*task_wait) (struct task_struct *p);
-	int (*task_prctl) (int option, unsigned long arg2,
-			   unsigned long arg3, unsigned long arg4,
-			   unsigned long arg5);
-	void (*task_to_inode) (struct task_struct *p, struct inode *inode);
-
-	int (*ipc_permission) (struct kern_ipc_perm *ipcp, short flag);
-	void (*ipc_getsecid) (struct kern_ipc_perm *ipcp, u32 *secid);
-
-	int (*msg_msg_alloc_security) (struct msg_msg *msg);
-	void (*msg_msg_free_security) (struct msg_msg *msg);
-
-	int (*msg_queue_alloc_security) (struct msg_queue *msq);
-	void (*msg_queue_free_security) (struct msg_queue *msq);
-	int (*msg_queue_associate) (struct msg_queue *msq, int msqflg);
-	int (*msg_queue_msgctl) (struct msg_queue *msq, int cmd);
-	int (*msg_queue_msgsnd) (struct msg_queue *msq,
-				 struct msg_msg *msg, int msqflg);
-	int (*msg_queue_msgrcv) (struct msg_queue *msq,
-				 struct msg_msg *msg,
-				 struct task_struct *target,
-				 long type, int mode);
-
-	int (*shm_alloc_security) (struct shmid_kernel *shp);
-	void (*shm_free_security) (struct shmid_kernel *shp);
-	int (*shm_associate) (struct shmid_kernel *shp, int shmflg);
-	int (*shm_shmctl) (struct shmid_kernel *shp, int cmd);
-	int (*shm_shmat) (struct shmid_kernel *shp,
-			  char __user *shmaddr, int shmflg);
-
-	int (*sem_alloc_security) (struct sem_array *sma);
-	void (*sem_free_security) (struct sem_array *sma);
-	int (*sem_associate) (struct sem_array *sma, int semflg);
-	int (*sem_semctl) (struct sem_array *sma, int cmd);
-	int (*sem_semop) (struct sem_array *sma,
-			  struct sembuf *sops, unsigned nsops, int alter);
-
-	int (*netlink_send) (struct sock *sk, struct sk_buff *skb);
-
-	void (*d_instantiate) (struct dentry *dentry, struct inode *inode);
-
-	int (*getprocattr) (struct task_struct *p, char *name, char **value);
-	int (*setprocattr) (struct task_struct *p, char *name, void *value, size_t size);
-	int (*secid_to_secctx) (u32 secid, char **secdata, u32 *seclen);
-	int (*secctx_to_secid) (const char *secdata, u32 seclen, u32 *secid);
-	void (*release_secctx) (char *secdata, u32 seclen);
-
-	int (*inode_notifysecctx)(struct inode *inode, void *ctx, u32 ctxlen);
-	int (*inode_setsecctx)(struct dentry *dentry, void *ctx, u32 ctxlen);
-	int (*inode_getsecctx)(struct inode *inode, void **ctx, u32 *ctxlen);
-
-#ifdef CONFIG_SECURITY_NETWORK
-	int (*unix_stream_connect) (struct sock *sock, struct sock *other, struct sock *newsk);
-	int (*unix_may_send) (struct socket *sock, struct socket *other);
-
-	int (*socket_create) (int family, int type, int protocol, int kern);
-	int (*socket_post_create) (struct socket *sock, int family,
-				   int type, int protocol, int kern);
-	int (*socket_bind) (struct socket *sock,
-			    struct sockaddr *address, int addrlen);
-	int (*socket_connect) (struct socket *sock,
-			       struct sockaddr *address, int addrlen);
-	int (*socket_listen) (struct socket *sock, int backlog);
-	int (*socket_accept) (struct socket *sock, struct socket *newsock);
-	int (*socket_sendmsg) (struct socket *sock,
-			       struct msghdr *msg, int size);
-	int (*socket_recvmsg) (struct socket *sock,
-			       struct msghdr *msg, int size, int flags);
-	int (*socket_getsockname) (struct socket *sock);
-	int (*socket_getpeername) (struct socket *sock);
-	int (*socket_getsockopt) (struct socket *sock, int level, int optname);
-	int (*socket_setsockopt) (struct socket *sock, int level, int optname);
-	int (*socket_shutdown) (struct socket *sock, int how);
-	int (*socket_sock_rcv_skb) (struct sock *sk, struct sk_buff *skb);
-	int (*socket_getpeersec_stream) (struct socket *sock, char __user *optval, int __user *optlen, unsigned len);
-	int (*socket_getpeersec_dgram) (struct socket *sock, struct sk_buff *skb, u32 *secid);
-	int (*sk_alloc_security) (struct sock *sk, int family, gfp_t priority);
-	void (*sk_free_security) (struct sock *sk);
-	void (*sk_clone_security) (const struct sock *sk, struct sock *newsk);
-	void (*sk_getsecid) (struct sock *sk, u32 *secid);
-	void (*sock_graft) (struct sock *sk, struct socket *parent);
-	int (*inet_conn_request) (struct sock *sk, struct sk_buff *skb,
-				  struct request_sock *req);
-	void (*inet_csk_clone) (struct sock *newsk, const struct request_sock *req);
-	void (*inet_conn_established) (struct sock *sk, struct sk_buff *skb);
-	int (*secmark_relabel_packet) (u32 secid);
-	void (*secmark_refcount_inc) (void);
-	void (*secmark_refcount_dec) (void);
-	void (*req_classify_flow) (const struct request_sock *req, struct flowi *fl);
-	int (*tun_dev_create)(void);
-	void (*tun_dev_post_create)(struct sock *sk);
-	int (*tun_dev_attach)(struct sock *sk);
-#endif	/* CONFIG_SECURITY_NETWORK */
-
-#ifdef CONFIG_SECURITY_NETWORK_XFRM
-	int (*xfrm_policy_alloc_security) (struct xfrm_sec_ctx **ctxp,
-			struct xfrm_user_sec_ctx *sec_ctx);
-	int (*xfrm_policy_clone_security) (struct xfrm_sec_ctx *old_ctx, struct xfrm_sec_ctx **new_ctx);
-	void (*xfrm_policy_free_security) (struct xfrm_sec_ctx *ctx);
-	int (*xfrm_policy_delete_security) (struct xfrm_sec_ctx *ctx);
-	int (*xfrm_state_alloc_security) (struct xfrm_state *x,
-		struct xfrm_user_sec_ctx *sec_ctx,
-		u32 secid);
-	void (*xfrm_state_free_security) (struct xfrm_state *x);
-	int (*xfrm_state_delete_security) (struct xfrm_state *x);
-	int (*xfrm_policy_lookup) (struct xfrm_sec_ctx *ctx, u32 fl_secid, u8 dir);
-	int (*xfrm_state_pol_flow_match) (struct xfrm_state *x,
-					  struct xfrm_policy *xp,
-					  const struct flowi *fl);
-	int (*xfrm_decode_session) (struct sk_buff *skb, u32 *secid, int ckall);
-#endif	/* CONFIG_SECURITY_NETWORK_XFRM */
-
-	/* key management security hooks */
-#ifdef CONFIG_KEYS
-	int (*key_alloc) (struct key *key, const struct cred *cred, unsigned long flags);
-	void (*key_free) (struct key *key);
-	int (*key_permission) (key_ref_t key_ref,
-			       const struct cred *cred,
-			       key_perm_t perm);
-	int (*key_getsecurity)(struct key *key, char **_buffer);
-#endif	/* CONFIG_KEYS */
-
-#ifdef CONFIG_AUDIT
-	int (*audit_rule_init) (u32 field, u32 op, char *rulestr, void **lsmrule);
-	int (*audit_rule_known) (struct audit_krule *krule);
-	int (*audit_rule_match) (u32 secid, u32 field, u32 op, void *lsmrule,
-				 struct audit_context *actx);
-	void (*audit_rule_free) (void *lsmrule);
-#endif /* CONFIG_AUDIT */
-};
-
-/* prototypes */
-extern int security_init(void);
-extern int security_module_enable(struct security_operations *ops);
-extern int register_security(struct security_operations *ops);
-extern void __init security_fixup_ops(struct security_operations *ops);
-
-
-/* Security operations */
-int security_ptrace_access_check(struct task_struct *child, unsigned int mode);
-int security_ptrace_traceme(struct task_struct *parent);
-int security_capget(struct task_struct *target,
-		    kernel_cap_t *effective,
-		    kernel_cap_t *inheritable,
-		    kernel_cap_t *permitted);
-int security_capset(struct cred *new, const struct cred *old,
-		    const kernel_cap_t *effective,
-		    const kernel_cap_t *inheritable,
-		    const kernel_cap_t *permitted);
-int security_capable(const struct cred *cred, struct user_namespace *ns,
-			int cap);
-int security_capable_noaudit(const struct cred *cred, struct user_namespace *ns,
-			     int cap);
-int security_quotactl(int cmds, int type, int id, struct super_block *sb);
-int security_quota_on(struct dentry *dentry);
-int security_syslog(int type);
-int security_settime(const struct timespec *ts, const struct timezone *tz);
-int security_vm_enough_memory_mm(struct mm_struct *mm, long pages);
-int security_bprm_set_creds(struct linux_binprm *bprm);
-int security_bprm_check(struct linux_binprm *bprm);
-void security_bprm_committing_creds(struct linux_binprm *bprm);
-void security_bprm_committed_creds(struct linux_binprm *bprm);
-int security_bprm_secureexec(struct linux_binprm *bprm);
-int security_sb_alloc(struct super_block *sb);
-void security_sb_free(struct super_block *sb);
-int security_sb_copy_data(char *orig, char *copy);
-int security_sb_remount(struct super_block *sb, void *data);
-int security_sb_kern_mount(struct super_block *sb, int flags, void *data);
-int security_sb_show_options(struct seq_file *m, struct super_block *sb);
-int security_sb_statfs(struct dentry *dentry);
-int security_sb_mount(char *dev_name, struct path *path,
-		      char *type, unsigned long flags, void *data);
-int security_sb_umount(struct vfsmount *mnt, int flags);
-int security_sb_pivotroot(struct path *old_path, struct path *new_path);
-int security_sb_set_mnt_opts(struct super_block *sb, struct security_mnt_opts *opts);
-void security_sb_clone_mnt_opts(const struct super_block *oldsb,
-				struct super_block *newsb);
-int security_sb_parse_opts_str(char *options, struct security_mnt_opts *opts);
-
-int security_inode_alloc(struct inode *inode);
-void security_inode_free(struct inode *inode);
-int security_inode_init_security(struct inode *inode, struct inode *dir,
-				 const struct qstr *qstr,
-				 initxattrs initxattrs, void *fs_data);
-int security_old_inode_init_security(struct inode *inode, struct inode *dir,
-				     const struct qstr *qstr, char **name,
-				     void **value, size_t *len);
-int security_inode_create(struct inode *dir, struct dentry *dentry, umode_t mode);
-int security_inode_link(struct dentry *old_dentry, struct inode *dir,
-			 struct dentry *new_dentry);
-int security_inode_unlink(struct inode *dir, struct dentry *dentry);
-int security_inode_symlink(struct inode *dir, struct dentry *dentry,
-			   const char *old_name);
-int security_inode_mkdir(struct inode *dir, struct dentry *dentry, umode_t mode);
-int security_inode_rmdir(struct inode *dir, struct dentry *dentry);
-int security_inode_mknod(struct inode *dir, struct dentry *dentry, umode_t mode, dev_t dev);
-int security_inode_rename(struct inode *old_dir, struct dentry *old_dentry,
-			  struct inode *new_dir, struct dentry *new_dentry);
-int security_inode_readlink(struct dentry *dentry);
-int security_inode_follow_link(struct dentry *dentry, struct nameidata *nd);
-int security_inode_permission(struct inode *inode, int mask);
-int security_inode_setattr(struct dentry *dentry, struct iattr *attr);
-int security_inode_getattr(struct vfsmount *mnt, struct dentry *dentry);
-int security_inode_setxattr(struct dentry *dentry, const char *name,
-			    const void *value, size_t size, int flags);
-void security_inode_post_setxattr(struct dentry *dentry, const char *name,
-				  const void *value, size_t size, int flags);
-int security_inode_getxattr(struct dentry *dentry, const char *name);
-int security_inode_listxattr(struct dentry *dentry);
-int security_inode_removexattr(struct dentry *dentry, const char *name);
-int security_inode_need_killpriv(struct dentry *dentry);
-int security_inode_killpriv(struct dentry *dentry);
-int security_inode_getsecurity(const struct inode *inode, const char *name, void **buffer, bool alloc);
-int security_inode_setsecurity(struct inode *inode, const char *name, const void *value, size_t size, int flags);
-int security_inode_listsecurity(struct inode *inode, char *buffer, size_t buffer_size);
-void security_inode_getsecid(const struct inode *inode, u32 *secid);
-int security_file_permission(struct file *file, int mask);
-int security_file_alloc(struct file *file);
-void security_file_free(struct file *file);
-int security_file_ioctl(struct file *file, unsigned int cmd, unsigned long arg);
-int security_file_mmap(struct file *file, unsigned long reqprot,
-			unsigned long prot, unsigned long flags,
-			unsigned long addr, unsigned long addr_only);
-int security_file_mprotect(struct vm_area_struct *vma, unsigned long reqprot,
-			   unsigned long prot);
-int security_file_lock(struct file *file, unsigned int cmd);
-int security_file_fcntl(struct file *file, unsigned int cmd, unsigned long arg);
-int security_file_set_fowner(struct file *file);
-int security_file_send_sigiotask(struct task_struct *tsk,
-				 struct fown_struct *fown, int sig);
-int security_file_receive(struct file *file);
-int security_dentry_open(struct file *file, const struct cred *cred);
-int security_task_create(unsigned long clone_flags);
-void security_task_free(struct task_struct *task);
-int security_cred_alloc_blank(struct cred *cred, gfp_t gfp);
-void security_cred_free(struct cred *cred);
-int security_prepare_creds(struct cred *new, const struct cred *old, gfp_t gfp);
-void security_transfer_creds(struct cred *new, const struct cred *old);
-int security_kernel_act_as(struct cred *new, u32 secid);
-int security_kernel_create_files_as(struct cred *new, struct inode *inode);
-int security_kernel_module_request(char *kmod_name);
-int security_task_fix_setuid(struct cred *new, const struct cred *old,
-			     int flags);
-int security_task_setpgid(struct task_struct *p, pid_t pgid);
-int security_task_getpgid(struct task_struct *p);
-int security_task_getsid(struct task_struct *p);
-void security_task_getsecid(struct task_struct *p, u32 *secid);
-int security_task_setnice(struct task_struct *p, int nice);
-int security_task_setioprio(struct task_struct *p, int ioprio);
-int security_task_getioprio(struct task_struct *p);
-int security_task_setrlimit(struct task_struct *p, unsigned int resource,
-		struct rlimit *new_rlim);
-int security_task_setscheduler(struct task_struct *p);
-int security_task_getscheduler(struct task_struct *p);
-int security_task_movememory(struct task_struct *p);
-int security_task_kill(struct task_struct *p, struct siginfo *info,
-			int sig, u32 secid);
-int security_task_wait(struct task_struct *p);
-int security_task_prctl(int option, unsigned long arg2, unsigned long arg3,
-			unsigned long arg4, unsigned long arg5);
-void security_task_to_inode(struct task_struct *p, struct inode *inode);
-int security_ipc_permission(struct kern_ipc_perm *ipcp, short flag);
-void security_ipc_getsecid(struct kern_ipc_perm *ipcp, u32 *secid);
-int security_msg_msg_alloc(struct msg_msg *msg);
-void security_msg_msg_free(struct msg_msg *msg);
-int security_msg_queue_alloc(struct msg_queue *msq);
-void security_msg_queue_free(struct msg_queue *msq);
-int security_msg_queue_associate(struct msg_queue *msq, int msqflg);
-int security_msg_queue_msgctl(struct msg_queue *msq, int cmd);
-int security_msg_queue_msgsnd(struct msg_queue *msq,
-			      struct msg_msg *msg, int msqflg);
-int security_msg_queue_msgrcv(struct msg_queue *msq, struct msg_msg *msg,
-			      struct task_struct *target, long type, int mode);
-int security_shm_alloc(struct shmid_kernel *shp);
-void security_shm_free(struct shmid_kernel *shp);
-int security_shm_associate(struct shmid_kernel *shp, int shmflg);
-int security_shm_shmctl(struct shmid_kernel *shp, int cmd);
-int security_shm_shmat(struct shmid_kernel *shp, char __user *shmaddr, int shmflg);
-int security_sem_alloc(struct sem_array *sma);
-void security_sem_free(struct sem_array *sma);
-int security_sem_associate(struct sem_array *sma, int semflg);
-int security_sem_semctl(struct sem_array *sma, int cmd);
-int security_sem_semop(struct sem_array *sma, struct sembuf *sops,
-			unsigned nsops, int alter);
-void security_d_instantiate(struct dentry *dentry, struct inode *inode);
-int security_getprocattr(struct task_struct *p, char *name, char **value);
-int security_setprocattr(struct task_struct *p, char *name, void *value, size_t size);
-int security_netlink_send(struct sock *sk, struct sk_buff *skb);
-int security_secid_to_secctx(u32 secid, char **secdata, u32 *seclen);
-int security_secctx_to_secid(const char *secdata, u32 seclen, u32 *secid);
-void security_release_secctx(char *secdata, u32 seclen);
-
-int security_inode_notifysecctx(struct inode *inode, void *ctx, u32 ctxlen);
-int security_inode_setsecctx(struct dentry *dentry, void *ctx, u32 ctxlen);
-int security_inode_getsecctx(struct inode *inode, void **ctx, u32 *ctxlen);
-#else /* CONFIG_SECURITY */
-struct security_mnt_opts {
-};
-
-static inline void security_init_mnt_opts(struct security_mnt_opts *opts)
-{
-}
-
-static inline void security_free_mnt_opts(struct security_mnt_opts *opts)
-{
-}
-
-/*
- * This is the default capabilities functionality.  Most of these functions
- * are just stubbed out, but a few must call the proper capable code.
- */
-
-static inline int security_init(void)
-{
-	return 0;
-}
-
-static inline int security_ptrace_access_check(struct task_struct *child,
-					     unsigned int mode)
-{
-	return cap_ptrace_access_check(child, mode);
-}
-
-static inline int security_ptrace_traceme(struct task_struct *parent)
-{
-	return cap_ptrace_traceme(parent);
-}
-
-static inline int security_capget(struct task_struct *target,
-				   kernel_cap_t *effective,
-				   kernel_cap_t *inheritable,
-				   kernel_cap_t *permitted)
-{
-	return cap_capget(target, effective, inheritable, permitted);
-}
-
-static inline int security_capset(struct cred *new,
-				   const struct cred *old,
-				   const kernel_cap_t *effective,
-				   const kernel_cap_t *inheritable,
-				   const kernel_cap_t *permitted)
-{
-	return cap_capset(new, old, effective, inheritable, permitted);
-}
-
-static inline int security_capable(const struct cred *cred,
-				   struct user_namespace *ns, int cap)
-{
-	return cap_capable(cred, ns, cap, SECURITY_CAP_AUDIT);
-}
-
-static inline int security_capable_noaudit(const struct cred *cred,
-					   struct user_namespace *ns, int cap) {
-	return cap_capable(cred, ns, cap, SECURITY_CAP_NOAUDIT);
-}
-
-static inline int security_quotactl(int cmds, int type, int id,
-				     struct super_block *sb)
-{
-	return 0;
-}
-
-static inline int security_quota_on(struct dentry *dentry)
-{
-	return 0;
-}
-
-static inline int security_syslog(int type)
-{
-	return 0;
-}
-
-static inline int security_settime(const struct timespec *ts,
-				   const struct timezone *tz)
-{
-	return cap_settime(ts, tz);
-}
-
-static inline int security_vm_enough_memory_mm(struct mm_struct *mm, long pages)
-{
-	return cap_vm_enough_memory(mm, pages);
-}
-
-static inline int security_bprm_set_creds(struct linux_binprm *bprm)
-{
-	return cap_bprm_set_creds(bprm);
-}
-
-static inline int security_bprm_check(struct linux_binprm *bprm)
-{
-	return 0;
-}
-
-static inline void security_bprm_committing_creds(struct linux_binprm *bprm)
-{
-}
-
-static inline void security_bprm_committed_creds(struct linux_binprm *bprm)
-{
-}
-
-static inline int security_bprm_secureexec(struct linux_binprm *bprm)
-{
-	return cap_bprm_secureexec(bprm);
-}
-
-static inline int security_sb_alloc(struct super_block *sb)
-{
-	return 0;
-}
-
-static inline void security_sb_free(struct super_block *sb)
-{ }
-
-static inline int security_sb_copy_data(char *orig, char *copy)
-{
-	return 0;
-}
-
-static inline int security_sb_remount(struct super_block *sb, void *data)
-{
-	return 0;
-}
-
-static inline int security_sb_kern_mount(struct super_block *sb, int flags, void *data)
-{
-	return 0;
-}
-
-static inline int security_sb_show_options(struct seq_file *m,
-					   struct super_block *sb)
-{
-	return 0;
-}
-
-static inline int security_sb_statfs(struct dentry *dentry)
-{
-	return 0;
-}
-
-static inline int security_sb_mount(char *dev_name, struct path *path,
-				    char *type, unsigned long flags,
-				    void *data)
-{
-	return 0;
-}
-
-static inline int security_sb_umount(struct vfsmount *mnt, int flags)
-{
-	return 0;
-}
-
-static inline int security_sb_pivotroot(struct path *old_path,
-					struct path *new_path)
-{
-	return 0;
-}
-
-static inline int security_sb_set_mnt_opts(struct super_block *sb,
-					   struct security_mnt_opts *opts)
-{
-	return 0;
-}
-
-static inline void security_sb_clone_mnt_opts(const struct super_block *oldsb,
-					      struct super_block *newsb)
-{ }
-
-static inline int security_sb_parse_opts_str(char *options, struct security_mnt_opts *opts)
-{
-	return 0;
-}
-
-static inline int security_inode_alloc(struct inode *inode)
-{
-	return 0;
-}
-
-static inline void security_inode_free(struct inode *inode)
-{ }
-
-static inline int security_inode_init_security(struct inode *inode,
-						struct inode *dir,
-						const struct qstr *qstr,
-						const initxattrs initxattrs,
-						void *fs_data)
-{
-	return 0;
-}
-
-static inline int security_old_inode_init_security(struct inode *inode,
-						   struct inode *dir,
-						   const struct qstr *qstr,
-						   char **name, void **value,
-						   size_t *len)
-{
-	return -EOPNOTSUPP;
-}
-
-static inline int security_inode_create(struct inode *dir,
-					 struct dentry *dentry,
-					 umode_t mode)
-{
-	return 0;
-}
-
-static inline int security_inode_link(struct dentry *old_dentry,
-				       struct inode *dir,
-				       struct dentry *new_dentry)
-{
-	return 0;
-}
-
-static inline int security_inode_unlink(struct inode *dir,
-					 struct dentry *dentry)
-{
-	return 0;
-}
-
-static inline int security_inode_symlink(struct inode *dir,
-					  struct dentry *dentry,
-					  const char *old_name)
-{
-	return 0;
-}
-
-static inline int security_inode_mkdir(struct inode *dir,
-					struct dentry *dentry,
-					int mode)
-{
-	return 0;
-}
-
-static inline int security_inode_rmdir(struct inode *dir,
-					struct dentry *dentry)
-{
-	return 0;
-}
-
-static inline int security_inode_mknod(struct inode *dir,
-					struct dentry *dentry,
-					int mode, dev_t dev)
-{
-	return 0;
-}
-
-static inline int security_inode_rename(struct inode *old_dir,
-					 struct dentry *old_dentry,
-					 struct inode *new_dir,
-					 struct dentry *new_dentry)
-{
-	return 0;
-}
-
-static inline int security_inode_readlink(struct dentry *dentry)
-{
-	return 0;
-}
-
-static inline int security_inode_follow_link(struct dentry *dentry,
-					      struct nameidata *nd)
-{
-	return 0;
-}
-
-static inline int security_inode_permission(struct inode *inode, int mask)
-{
-	return 0;
-}
-
-static inline int security_inode_setattr(struct dentry *dentry,
-					  struct iattr *attr)
-{
-	return 0;
-}
-
-static inline int security_inode_getattr(struct vfsmount *mnt,
-					  struct dentry *dentry)
-{
-	return 0;
-}
-
-static inline int security_inode_setxattr(struct dentry *dentry,
-		const char *name, const void *value, size_t size, int flags)
-{
-	return cap_inode_setxattr(dentry, name, value, size, flags);
-}
-
-static inline void security_inode_post_setxattr(struct dentry *dentry,
-		const char *name, const void *value, size_t size, int flags)
-{ }
-
-static inline int security_inode_getxattr(struct dentry *dentry,
-			const char *name)
-{
-	return 0;
-}
-
-static inline int security_inode_listxattr(struct dentry *dentry)
-{
-	return 0;
-}
-
-static inline int security_inode_removexattr(struct dentry *dentry,
-			const char *name)
-{
-	return cap_inode_removexattr(dentry, name);
-}
-
-static inline int security_inode_need_killpriv(struct dentry *dentry)
-{
-	return cap_inode_need_killpriv(dentry);
-}
-
-static inline int security_inode_killpriv(struct dentry *dentry)
-{
-	return cap_inode_killpriv(dentry);
-}
-
-static inline int security_inode_getsecurity(const struct inode *inode, const char *name, void **buffer, bool alloc)
-{
-	return -EOPNOTSUPP;
-}
-
-static inline int security_inode_setsecurity(struct inode *inode, const char *name, const void *value, size_t size, int flags)
-{
-	return -EOPNOTSUPP;
-}
-
-static inline int security_inode_listsecurity(struct inode *inode, char *buffer, size_t buffer_size)
-{
-	return 0;
-}
-
-static inline void security_inode_getsecid(const struct inode *inode, u32 *secid)
-{
-	*secid = 0;
-}
-
-static inline int security_file_permission(struct file *file, int mask)
-{
-	return 0;
-}
-
-static inline int security_file_alloc(struct file *file)
-{
-	return 0;
-}
-
-static inline void security_file_free(struct file *file)
-{ }
-
-static inline int security_file_ioctl(struct file *file, unsigned int cmd,
-				      unsigned long arg)
-{
-	return 0;
-}
-
-static inline int security_file_mmap(struct file *file, unsigned long reqprot,
-				     unsigned long prot,
-				     unsigned long flags,
-				     unsigned long addr,
-				     unsigned long addr_only)
-{
-	return cap_file_mmap(file, reqprot, prot, flags, addr, addr_only);
-}
-
-static inline int security_file_mprotect(struct vm_area_struct *vma,
-					 unsigned long reqprot,
-					 unsigned long prot)
-{
-	return 0;
-}
-
-static inline int security_file_lock(struct file *file, unsigned int cmd)
-{
-	return 0;
-}
-
-static inline int security_file_fcntl(struct file *file, unsigned int cmd,
-				      unsigned long arg)
-{
-	return 0;
-}
-
-static inline int security_file_set_fowner(struct file *file)
-{
-	return 0;
-}
-
-static inline int security_file_send_sigiotask(struct task_struct *tsk,
-					       struct fown_struct *fown,
-					       int sig)
-{
-	return 0;
-}
-
-static inline int security_file_receive(struct file *file)
-{
-	return 0;
-}
-
-static inline int security_dentry_open(struct file *file,
-				       const struct cred *cred)
-{
-	return 0;
-}
-
-static inline int security_task_create(unsigned long clone_flags)
-{
-	return 0;
-}
-
-static inline void security_task_free(struct task_struct *task)
-{ }
-
-static inline int security_cred_alloc_blank(struct cred *cred, gfp_t gfp)
-{
-	return 0;
-}
-
-static inline void security_cred_free(struct cred *cred)
-{ }
-
-static inline int security_prepare_creds(struct cred *new,
-					 const struct cred *old,
-					 gfp_t gfp)
-{
-	return 0;
-}
-
-static inline void security_transfer_creds(struct cred *new,
-					   const struct cred *old)
-{
-}
-
-static inline int security_kernel_act_as(struct cred *cred, u32 secid)
-{
-	return 0;
-}
-
-static inline int security_kernel_create_files_as(struct cred *cred,
-						  struct inode *inode)
-{
-	return 0;
-}
-
-static inline int security_kernel_module_request(char *kmod_name)
-{
-	return 0;
-}
-
-static inline int security_task_fix_setuid(struct cred *new,
-					   const struct cred *old,
-					   int flags)
-{
-	return cap_task_fix_setuid(new, old, flags);
-}
-
-static inline int security_task_setpgid(struct task_struct *p, pid_t pgid)
-{
-	return 0;
-}
-
-static inline int security_task_getpgid(struct task_struct *p)
-{
-	return 0;
-}
-
-static inline int security_task_getsid(struct task_struct *p)
-{
-	return 0;
-}
-
-static inline void security_task_getsecid(struct task_struct *p, u32 *secid)
-{
-	*secid = 0;
-}
-
-static inline int security_task_setnice(struct task_struct *p, int nice)
-{
-	return cap_task_setnice(p, nice);
-}
-
-static inline int security_task_setioprio(struct task_struct *p, int ioprio)
-{
-	return cap_task_setioprio(p, ioprio);
-}
-
-static inline int security_task_getioprio(struct task_struct *p)
-{
-	return 0;
-}
-
-static inline int security_task_setrlimit(struct task_struct *p,
-					  unsigned int resource,
-					  struct rlimit *new_rlim)
-{
-	return 0;
-}
-
-static inline int security_task_setscheduler(struct task_struct *p)
-{
-	return cap_task_setscheduler(p);
-}
-
-static inline int security_task_getscheduler(struct task_struct *p)
-{
-	return 0;
-}
-
-static inline int security_task_movememory(struct task_struct *p)
-{
-	return 0;
-}
-
-static inline int security_task_kill(struct task_struct *p,
-				     struct siginfo *info, int sig,
-				     u32 secid)
-{
-	return 0;
-}
-
-static inline int security_task_wait(struct task_struct *p)
-{
-	return 0;
-}
-
-static inline int security_task_prctl(int option, unsigned long arg2,
-				      unsigned long arg3,
-				      unsigned long arg4,
-				      unsigned long arg5)
-{
-	return cap_task_prctl(option, arg2, arg3, arg3, arg5);
-}
-
-static inline void security_task_to_inode(struct task_struct *p, struct inode *inode)
-{ }
-
-static inline int security_ipc_permission(struct kern_ipc_perm *ipcp,
-					  short flag)
-{
-	return 0;
-}
-
-static inline void security_ipc_getsecid(struct kern_ipc_perm *ipcp, u32 *secid)
-{
-	*secid = 0;
-}
-
-static inline int security_msg_msg_alloc(struct msg_msg *msg)
-{
-	return 0;
-}
-
-static inline void security_msg_msg_free(struct msg_msg *msg)
-{ }
-
-static inline int security_msg_queue_alloc(struct msg_queue *msq)
-{
-	return 0;
-}
-
-static inline void security_msg_queue_free(struct msg_queue *msq)
-{ }
-
-static inline int security_msg_queue_associate(struct msg_queue *msq,
-					       int msqflg)
-{
-	return 0;
-}
-
-static inline int security_msg_queue_msgctl(struct msg_queue *msq, int cmd)
-{
-	return 0;
-}
-
-static inline int security_msg_queue_msgsnd(struct msg_queue *msq,
-					    struct msg_msg *msg, int msqflg)
-{
-	return 0;
-}
-
-static inline int security_msg_queue_msgrcv(struct msg_queue *msq,
-					    struct msg_msg *msg,
-					    struct task_struct *target,
-					    long type, int mode)
-{
-	return 0;
-}
-
-static inline int security_shm_alloc(struct shmid_kernel *shp)
-{
-	return 0;
-}
-
-static inline void security_shm_free(struct shmid_kernel *shp)
-{ }
-
-static inline int security_shm_associate(struct shmid_kernel *shp,
-					 int shmflg)
-{
-	return 0;
-}
-
-static inline int security_shm_shmctl(struct shmid_kernel *shp, int cmd)
-{
-	return 0;
-}
-
-static inline int security_shm_shmat(struct shmid_kernel *shp,
-				     char __user *shmaddr, int shmflg)
-{
-	return 0;
-}
-
-static inline int security_sem_alloc(struct sem_array *sma)
-{
-	return 0;
-}
-
-static inline void security_sem_free(struct sem_array *sma)
-{ }
-
-static inline int security_sem_associate(struct sem_array *sma, int semflg)
-{
-	return 0;
-}
-
-static inline int security_sem_semctl(struct sem_array *sma, int cmd)
-{
-	return 0;
-}
-
-static inline int security_sem_semop(struct sem_array *sma,
-				     struct sembuf *sops, unsigned nsops,
-				     int alter)
-{
-	return 0;
-}
-
-static inline void security_d_instantiate(struct dentry *dentry, struct inode *inode)
-{ }
-
-static inline int security_getprocattr(struct task_struct *p, char *name, char **value)
-{
-	return -EINVAL;
-}
-
-static inline int security_setprocattr(struct task_struct *p, char *name, void *value, size_t size)
-{
-	return -EINVAL;
-}
-
-static inline int security_netlink_send(struct sock *sk, struct sk_buff *skb)
-{
-	return cap_netlink_send(sk, skb);
-}
-
-static inline int security_secid_to_secctx(u32 secid, char **secdata, u32 *seclen)
-{
-	return -EOPNOTSUPP;
-}
-
-static inline int security_secctx_to_secid(const char *secdata,
-					   u32 seclen,
-					   u32 *secid)
-{
-	return -EOPNOTSUPP;
-}
-
-static inline void security_release_secctx(char *secdata, u32 seclen)
-{
-}
-
-static inline int security_inode_notifysecctx(struct inode *inode, void *ctx, u32 ctxlen)
-{
-	return -EOPNOTSUPP;
-}
-static inline int security_inode_setsecctx(struct dentry *dentry, void *ctx, u32 ctxlen)
-{
-	return -EOPNOTSUPP;
-}
-static inline int security_inode_getsecctx(struct inode *inode, void **ctx, u32 *ctxlen)
-{
-	return -EOPNOTSUPP;
-}
-#endif	/* CONFIG_SECURITY */
-
-#ifdef CONFIG_SECURITY_NETWORK
-
-int security_unix_stream_connect(struct sock *sock, struct sock *other, struct sock *newsk);
-int security_unix_may_send(struct socket *sock,  struct socket *other);
-int security_socket_create(int family, int type, int protocol, int kern);
-int security_socket_post_create(struct socket *sock, int family,
-				int type, int protocol, int kern);
-int security_socket_bind(struct socket *sock, struct sockaddr *address, int addrlen);
-int security_socket_connect(struct socket *sock, struct sockaddr *address, int addrlen);
-int security_socket_listen(struct socket *sock, int backlog);
-int security_socket_accept(struct socket *sock, struct socket *newsock);
-int security_socket_sendmsg(struct socket *sock, struct msghdr *msg, int size);
-int security_socket_recvmsg(struct socket *sock, struct msghdr *msg,
-			    int size, int flags);
-int security_socket_getsockname(struct socket *sock);
-int security_socket_getpeername(struct socket *sock);
-int security_socket_getsockopt(struct socket *sock, int level, int optname);
-int security_socket_setsockopt(struct socket *sock, int level, int optname);
-int security_socket_shutdown(struct socket *sock, int how);
-int security_sock_rcv_skb(struct sock *sk, struct sk_buff *skb);
-int security_socket_getpeersec_stream(struct socket *sock, char __user *optval,
-				      int __user *optlen, unsigned len);
-int security_socket_getpeersec_dgram(struct socket *sock, struct sk_buff *skb, u32 *secid);
-int security_sk_alloc(struct sock *sk, int family, gfp_t priority);
-void security_sk_free(struct sock *sk);
-void security_sk_clone(const struct sock *sk, struct sock *newsk);
-void security_sk_classify_flow(struct sock *sk, struct flowi *fl);
-void security_req_classify_flow(const struct request_sock *req, struct flowi *fl);
-void security_sock_graft(struct sock*sk, struct socket *parent);
-int security_inet_conn_request(struct sock *sk,
-			struct sk_buff *skb, struct request_sock *req);
-void security_inet_csk_clone(struct sock *newsk,
-			const struct request_sock *req);
-void security_inet_conn_established(struct sock *sk,
-			struct sk_buff *skb);
-int security_secmark_relabel_packet(u32 secid);
-void security_secmark_refcount_inc(void);
-void security_secmark_refcount_dec(void);
-int security_tun_dev_create(void);
-void security_tun_dev_post_create(struct sock *sk);
-int security_tun_dev_attach(struct sock *sk);
-
-#else	/* CONFIG_SECURITY_NETWORK */
-static inline int security_unix_stream_connect(struct sock *sock,
-					       struct sock *other,
-					       struct sock *newsk)
-{
-	return 0;
-}
-
-static inline int security_unix_may_send(struct socket *sock,
-					 struct socket *other)
-{
-	return 0;
-}
-
-static inline int security_socket_create(int family, int type,
-					 int protocol, int kern)
-{
-	return 0;
-}
-
-static inline int security_socket_post_create(struct socket *sock,
-					      int family,
-					      int type,
-					      int protocol, int kern)
-{
-	return 0;
-}
-
-static inline int security_socket_bind(struct socket *sock,
-				       struct sockaddr *address,
-				       int addrlen)
-{
-	return 0;
-}
-
-static inline int security_socket_connect(struct socket *sock,
-					  struct sockaddr *address,
-					  int addrlen)
-{
-	return 0;
-}
-
-static inline int security_socket_listen(struct socket *sock, int backlog)
-{
-	return 0;
-}
-
-static inline int security_socket_accept(struct socket *sock,
-					 struct socket *newsock)
-{
-	return 0;
-}
-
-static inline int security_socket_sendmsg(struct socket *sock,
-					  struct msghdr *msg, int size)
-{
-	return 0;
-}
-
-static inline int security_socket_recvmsg(struct socket *sock,
-					  struct msghdr *msg, int size,
-					  int flags)
-{
-	return 0;
-}
-
-static inline int security_socket_getsockname(struct socket *sock)
-{
-	return 0;
-}
-
-static inline int security_socket_getpeername(struct socket *sock)
-{
-	return 0;
-}
-
-static inline int security_socket_getsockopt(struct socket *sock,
-					     int level, int optname)
-{
-	return 0;
-}
-
-static inline int security_socket_setsockopt(struct socket *sock,
-					     int level, int optname)
-{
-	return 0;
-}
-
-static inline int security_socket_shutdown(struct socket *sock, int how)
-{
-	return 0;
-}
-static inline int security_sock_rcv_skb(struct sock *sk,
-					struct sk_buff *skb)
-{
-	return 0;
-}
-
-static inline int security_socket_getpeersec_stream(struct socket *sock, char __user *optval,
-						    int __user *optlen, unsigned len)
-{
-	return -ENOPROTOOPT;
-}
-
-static inline int security_socket_getpeersec_dgram(struct socket *sock, struct sk_buff *skb, u32 *secid)
-{
-	return -ENOPROTOOPT;
-}
-
-static inline int security_sk_alloc(struct sock *sk, int family, gfp_t priority)
-{
-	return 0;
-}
-
-static inline void security_sk_free(struct sock *sk)
-{
-}
-
-static inline void security_sk_clone(const struct sock *sk, struct sock *newsk)
-{
-}
-
-static inline void security_sk_classify_flow(struct sock *sk, struct flowi *fl)
-{
-}
-
-static inline void security_req_classify_flow(const struct request_sock *req, struct flowi *fl)
-{
-}
-
-static inline void security_sock_graft(struct sock *sk, struct socket *parent)
-{
-}
-
-static inline int security_inet_conn_request(struct sock *sk,
-			struct sk_buff *skb, struct request_sock *req)
-{
-	return 0;
-}
-
-static inline void security_inet_csk_clone(struct sock *newsk,
-			const struct request_sock *req)
-{
-}
-
-static inline void security_inet_conn_established(struct sock *sk,
-			struct sk_buff *skb)
-{
-}
-
-static inline int security_secmark_relabel_packet(u32 secid)
-{
-	return 0;
-}
-
-static inline void security_secmark_refcount_inc(void)
-{
-}
-
-static inline void security_secmark_refcount_dec(void)
-{
-}
-
-static inline int security_tun_dev_create(void)
-{
-	return 0;
-}
-
-static inline void security_tun_dev_post_create(struct sock *sk)
-{
-}
-
-static inline int security_tun_dev_attach(struct sock *sk)
-{
-	return 0;
-}
-#endif	/* CONFIG_SECURITY_NETWORK */
-
-#ifdef CONFIG_SECURITY_NETWORK_XFRM
-
-int security_xfrm_policy_alloc(struct xfrm_sec_ctx **ctxp, struct xfrm_user_sec_ctx *sec_ctx);
-int security_xfrm_policy_clone(struct xfrm_sec_ctx *old_ctx, struct xfrm_sec_ctx **new_ctxp);
-void security_xfrm_policy_free(struct xfrm_sec_ctx *ctx);
-int security_xfrm_policy_delete(struct xfrm_sec_ctx *ctx);
-int security_xfrm_state_alloc(struct xfrm_state *x, struct xfrm_user_sec_ctx *sec_ctx);
-int security_xfrm_state_alloc_acquire(struct xfrm_state *x,
-				      struct xfrm_sec_ctx *polsec, u32 secid);
-int security_xfrm_state_delete(struct xfrm_state *x);
-void security_xfrm_state_free(struct xfrm_state *x);
-int security_xfrm_policy_lookup(struct xfrm_sec_ctx *ctx, u32 fl_secid, u8 dir);
-int security_xfrm_state_pol_flow_match(struct xfrm_state *x,
-				       struct xfrm_policy *xp,
-				       const struct flowi *fl);
-int security_xfrm_decode_session(struct sk_buff *skb, u32 *secid);
-void security_skb_classify_flow(struct sk_buff *skb, struct flowi *fl);
-
-#else	/* CONFIG_SECURITY_NETWORK_XFRM */
-
-static inline int security_xfrm_policy_alloc(struct xfrm_sec_ctx **ctxp, struct xfrm_user_sec_ctx *sec_ctx)
-{
-	return 0;
-}
-
-static inline int security_xfrm_policy_clone(struct xfrm_sec_ctx *old, struct xfrm_sec_ctx **new_ctxp)
-{
-	return 0;
-}
-
-static inline void security_xfrm_policy_free(struct xfrm_sec_ctx *ctx)
-{
-}
-
-static inline int security_xfrm_policy_delete(struct xfrm_sec_ctx *ctx)
-{
-	return 0;
-}
-
-static inline int security_xfrm_state_alloc(struct xfrm_state *x,
-					struct xfrm_user_sec_ctx *sec_ctx)
-{
-	return 0;
-}
-
-static inline int security_xfrm_state_alloc_acquire(struct xfrm_state *x,
-					struct xfrm_sec_ctx *polsec, u32 secid)
-{
-	return 0;
-}
-
-static inline void security_xfrm_state_free(struct xfrm_state *x)
-{
-}
-
-static inline int security_xfrm_state_delete(struct xfrm_state *x)
-{
-	return 0;
-}
-
-static inline int security_xfrm_policy_lookup(struct xfrm_sec_ctx *ctx, u32 fl_secid, u8 dir)
-{
-	return 0;
-}
-
-static inline int security_xfrm_state_pol_flow_match(struct xfrm_state *x,
-			struct xfrm_policy *xp, const struct flowi *fl)
-{
-	return 1;
-}
-
-static inline int security_xfrm_decode_session(struct sk_buff *skb, u32 *secid)
-{
-	return 0;
-}
-
-static inline void security_skb_classify_flow(struct sk_buff *skb, struct flowi *fl)
-{
-}
-
-#endif	/* CONFIG_SECURITY_NETWORK_XFRM */
-
-#ifdef CONFIG_SECURITY_PATH
-int security_path_unlink(struct path *dir, struct dentry *dentry);
-int security_path_mkdir(struct path *dir, struct dentry *dentry, umode_t mode);
-int security_path_rmdir(struct path *dir, struct dentry *dentry);
-int security_path_mknod(struct path *dir, struct dentry *dentry, umode_t mode,
-			unsigned int dev);
-int security_path_truncate(struct path *path);
-int security_path_symlink(struct path *dir, struct dentry *dentry,
-			  const char *old_name);
-int security_path_link(struct dentry *old_dentry, struct path *new_dir,
-		       struct dentry *new_dentry);
-int security_path_rename(struct path *old_dir, struct dentry *old_dentry,
-			 struct path *new_dir, struct dentry *new_dentry);
-int security_path_chmod(struct path *path, umode_t mode);
-int security_path_chown(struct path *path, uid_t uid, gid_t gid);
-int security_path_chroot(struct path *path);
-#else	/* CONFIG_SECURITY_PATH */
-static inline int security_path_unlink(struct path *dir, struct dentry *dentry)
-{
-	return 0;
-}
-
-static inline int security_path_mkdir(struct path *dir, struct dentry *dentry,
-				      umode_t mode)
-{
-	return 0;
-}
-
-static inline int security_path_rmdir(struct path *dir, struct dentry *dentry)
-{
-	return 0;
-}
-
-static inline int security_path_mknod(struct path *dir, struct dentry *dentry,
-				      umode_t mode, unsigned int dev)
-{
-	return 0;
-}
-
-static inline int security_path_truncate(struct path *path)
-{
-	return 0;
-}
-
-static inline int security_path_symlink(struct path *dir, struct dentry *dentry,
-					const char *old_name)
-{
-	return 0;
-}
-
-static inline int security_path_link(struct dentry *old_dentry,
-				     struct path *new_dir,
-				     struct dentry *new_dentry)
-{
-	return 0;
-}
-
-static inline int security_path_rename(struct path *old_dir,
-				       struct dentry *old_dentry,
-				       struct path *new_dir,
-				       struct dentry *new_dentry)
-{
-	return 0;
-}
-
-static inline int security_path_chmod(struct path *path, umode_t mode)
-{
-	return 0;
-}
-
-static inline int security_path_chown(struct path *path, uid_t uid, gid_t gid)
-{
-	return 0;
-}
-
-static inline int security_path_chroot(struct path *path)
-{
-	return 0;
-}
-#endif	/* CONFIG_SECURITY_PATH */
-
-#ifdef CONFIG_KEYS
-#ifdef CONFIG_SECURITY
-
-int security_key_alloc(struct key *key, const struct cred *cred, unsigned long flags);
-void security_key_free(struct key *key);
-int security_key_permission(key_ref_t key_ref,
-			    const struct cred *cred, key_perm_t perm);
-int security_key_getsecurity(struct key *key, char **_buffer);
-
-#else
-
-static inline int security_key_alloc(struct key *key,
-				     const struct cred *cred,
-				     unsigned long flags)
-{
-	return 0;
-}
-
-static inline void security_key_free(struct key *key)
-{
-}
-
-static inline int security_key_permission(key_ref_t key_ref,
-					  const struct cred *cred,
-					  key_perm_t perm)
-{
-	return 0;
-}
-
-static inline int security_key_getsecurity(struct key *key, char **_buffer)
-{
-	*_buffer = NULL;
-	return 0;
-}
-
-#endif
-#endif /* CONFIG_KEYS */
-
-#ifdef CONFIG_AUDIT
-#ifdef CONFIG_SECURITY
-int security_audit_rule_init(u32 field, u32 op, char *rulestr, void **lsmrule);
-int security_audit_rule_known(struct audit_krule *krule);
-int security_audit_rule_match(u32 secid, u32 field, u32 op, void *lsmrule,
-			      struct audit_context *actx);
-void security_audit_rule_free(void *lsmrule);
-
-#else
-
-static inline int security_audit_rule_init(u32 field, u32 op, char *rulestr,
-					   void **lsmrule)
-{
-	return 0;
-}
-
-static inline int security_audit_rule_known(struct audit_krule *krule)
-{
-	return 0;
-}
-
-static inline int security_audit_rule_match(u32 secid, u32 field, u32 op,
-				   void *lsmrule, struct audit_context *actx)
-{
-	return 0;
-}
-
-static inline void security_audit_rule_free(void *lsmrule)
-{ }
-
-#endif /* CONFIG_SECURITY */
-#endif /* CONFIG_AUDIT */
-
-#ifdef CONFIG_SECURITYFS
-
-extern struct dentry *securityfs_create_file(const char *name, umode_t mode,
-					     struct dentry *parent, void *data,
-					     const struct file_operations *fops);
-extern struct dentry *securityfs_create_dir(const char *name, struct dentry *parent);
-extern void securityfs_remove(struct dentry *dentry);
-
-#else /* CONFIG_SECURITYFS */
-
-static inline struct dentry *securityfs_create_dir(const char *name,
-						   struct dentry *parent)
-{
-	return ERR_PTR(-ENODEV);
-}
-
-static inline struct dentry *securityfs_create_file(const char *name,
-						    umode_t mode,
-						    struct dentry *parent,
-						    void *data,
-						    const struct file_operations *fops)
-{
-	return ERR_PTR(-ENODEV);
-}
-
-static inline void securityfs_remove(struct dentry *dentry)
-{}
-
-#endif
-
-#ifdef CONFIG_SECURITY
-
-static inline char *alloc_secdata(void)
-{
-	return (char *)get_zeroed_page(GFP_KERNEL);
-}
-
-static inline void free_secdata(void *secdata)
-{
-	free_page((unsigned long)secdata);
-}
-
-#else
-
-static inline char *alloc_secdata(void)
-{
-        return (char *)1;
-}
-
-static inline void free_secdata(void *secdata)
-{ }
-#endif /* CONFIG_SECURITY */
-
-#endif /* ! __LINUX_SECURITY_H */
-
diff --git a/ANDROID_3.4.5/include/linux/selection.h b/ANDROID_3.4.5/include/linux/selection.h
deleted file mode 100644
index 85193aa8..00000000
--- a/ANDROID_3.4.5/include/linux/selection.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- * selection.h
- *
- * Interface between console.c, tty_io.c, vt.c, vc_screen.c and selection.c
- */
-
-#ifndef _LINUX_SELECTION_H_
-#define _LINUX_SELECTION_H_
-
-#include <linux/tiocl.h>
-#include <linux/vt_buffer.h>
-
-struct tty_struct;
-
-extern struct vc_data *sel_cons;
-struct tty_struct;
-
-extern void clear_selection(void);
-extern int set_selection(const struct tiocl_selection __user *sel, struct tty_struct *tty);
-extern int paste_selection(struct tty_struct *tty);
-extern int sel_loadlut(char __user *p);
-extern int mouse_reporting(void);
-extern void mouse_report(struct tty_struct * tty, int butt, int mrx, int mry);
-
-extern int console_blanked;
-
-extern unsigned char color_table[];
-extern int default_red[];
-extern int default_grn[];
-extern int default_blu[];
-
-extern unsigned short *screen_pos(struct vc_data *vc, int w_offset, int viewed);
-extern u16 screen_glyph(struct vc_data *vc, int offset);
-extern void complement_pos(struct vc_data *vc, int offset);
-extern void invert_screen(struct vc_data *vc, int offset, int count, int shift);
-
-extern void getconsxy(struct vc_data *vc, unsigned char *p);
-extern void putconsxy(struct vc_data *vc, unsigned char *p);
-
-extern u16 vcs_scr_readw(struct vc_data *vc, const u16 *org);
-extern void vcs_scr_writew(struct vc_data *vc, u16 val, u16 *org);
-extern void vcs_scr_updated(struct vc_data *vc);
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/selinux.h b/ANDROID_3.4.5/include/linux/selinux.h
deleted file mode 100644
index 44f45961..00000000
--- a/ANDROID_3.4.5/include/linux/selinux.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * SELinux services exported to the rest of the kernel.
- *
- * Author: James Morris <jmorris@redhat.com>
- *
- * Copyright (C) 2005 Red Hat, Inc., James Morris <jmorris@redhat.com>
- * Copyright (C) 2006 Trusted Computer Solutions, Inc. <dgoeddel@trustedcs.com>
- * Copyright (C) 2006 IBM Corporation, Timothy R. Chavez <tinytim@us.ibm.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2,
- * as published by the Free Software Foundation.
- */
-#ifndef _LINUX_SELINUX_H
-#define _LINUX_SELINUX_H
-
-struct selinux_audit_rule;
-struct audit_context;
-struct kern_ipc_perm;
-
-#ifdef CONFIG_SECURITY_SELINUX
-
-/**
- * selinux_is_enabled - is SELinux enabled?
- */
-bool selinux_is_enabled(void);
-#else
-
-static inline bool selinux_is_enabled(void)
-{
-	return false;
-}
-#endif	/* CONFIG_SECURITY_SELINUX */
-
-#endif /* _LINUX_SELINUX_H */
diff --git a/ANDROID_3.4.5/include/linux/selinux_netlink.h b/ANDROID_3.4.5/include/linux/selinux_netlink.h
deleted file mode 100644
index d2397977..00000000
--- a/ANDROID_3.4.5/include/linux/selinux_netlink.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * Netlink event notifications for SELinux.
- *
- * Author: James Morris <jmorris@redhat.com>
- *
- * Copyright (C) 2004 Red Hat, Inc., James Morris <jmorris@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2,
- * as published by the Free Software Foundation.
- */
-#ifndef _LINUX_SELINUX_NETLINK_H
-#define _LINUX_SELINUX_NETLINK_H
-
-#include <linux/types.h>
-
-/* Message types. */
-#define SELNL_MSG_BASE 0x10
-enum {
-	SELNL_MSG_SETENFORCE = SELNL_MSG_BASE,
-	SELNL_MSG_POLICYLOAD,
-	SELNL_MSG_MAX
-};
-
-#ifndef __KERNEL__
-/* Multicast groups - backwards compatiblility for userspace */
-#define SELNL_GRP_NONE		0x00000000
-#define SELNL_GRP_AVC		0x00000001	/* AVC notifications */
-#define SELNL_GRP_ALL		0xffffffff
-#endif
-
-enum selinux_nlgroups {
-	SELNLGRP_NONE,
-#define SELNLGRP_NONE	SELNLGRP_NONE
-	SELNLGRP_AVC,
-#define SELNLGRP_AVC	SELNLGRP_AVC
-	__SELNLGRP_MAX
-};
-#define SELNLGRP_MAX	(__SELNLGRP_MAX - 1)
-
-/* Message structures */
-struct selnl_msg_setenforce {
-	__s32		val;
-};
-
-struct selnl_msg_policyload {
-	__u32	seqno;
-};
-
-#endif /* _LINUX_SELINUX_NETLINK_H */
diff --git a/ANDROID_3.4.5/include/linux/sem.h b/ANDROID_3.4.5/include/linux/sem.h
deleted file mode 100644
index 10d6b226..00000000
--- a/ANDROID_3.4.5/include/linux/sem.h
+++ /dev/null
@@ -1,127 +0,0 @@
-#ifndef _LINUX_SEM_H
-#define _LINUX_SEM_H
-
-#include <linux/ipc.h>
-
-/* semop flags */
-#define SEM_UNDO        0x1000  /* undo the operation on exit */
-
-/* semctl Command Definitions. */
-#define GETPID  11       /* get sempid */
-#define GETVAL  12       /* get semval */
-#define GETALL  13       /* get all semval's */
-#define GETNCNT 14       /* get semncnt */
-#define GETZCNT 15       /* get semzcnt */
-#define SETVAL  16       /* set semval */
-#define SETALL  17       /* set all semval's */
-
-/* ipcs ctl cmds */
-#define SEM_STAT 18
-#define SEM_INFO 19
-
-/* Obsolete, used only for backwards compatibility and libc5 compiles */
-struct semid_ds {
-	struct ipc_perm	sem_perm;		/* permissions .. see ipc.h */
-	__kernel_time_t	sem_otime;		/* last semop time */
-	__kernel_time_t	sem_ctime;		/* last change time */
-	struct sem	*sem_base;		/* ptr to first semaphore in array */
-	struct sem_queue *sem_pending;		/* pending operations to be processed */
-	struct sem_queue **sem_pending_last;	/* last pending operation */
-	struct sem_undo	*undo;			/* undo requests on this array */
-	unsigned short	sem_nsems;		/* no. of semaphores in array */
-};
-
-/* Include the definition of semid64_ds */
-#include <asm/sembuf.h>
-
-/* semop system calls takes an array of these. */
-struct sembuf {
-	unsigned short  sem_num;	/* semaphore index in array */
-	short		sem_op;		/* semaphore operation */
-	short		sem_flg;	/* operation flags */
-};
-
-/* arg for semctl system calls. */
-union semun {
-	int val;			/* value for SETVAL */
-	struct semid_ds __user *buf;	/* buffer for IPC_STAT & IPC_SET */
-	unsigned short __user *array;	/* array for GETALL & SETALL */
-	struct seminfo __user *__buf;	/* buffer for IPC_INFO */
-	void __user *__pad;
-};
-
-struct  seminfo {
-	int semmap;
-	int semmni;
-	int semmns;
-	int semmnu;
-	int semmsl;
-	int semopm;
-	int semume;
-	int semusz;
-	int semvmx;
-	int semaem;
-};
-
-#define SEMMNI  128             /* <= IPCMNI  max # of semaphore identifiers */
-#define SEMMSL  250             /* <= 8 000 max num of semaphores per id */
-#define SEMMNS  (SEMMNI*SEMMSL) /* <= INT_MAX max # of semaphores in system */
-#define SEMOPM  32	        /* <= 1 000 max num of ops per semop call */
-#define SEMVMX  32767           /* <= 32767 semaphore maximum value */
-#define SEMAEM  SEMVMX          /* adjust on exit max value */
-
-/* unused */
-#define SEMUME  SEMOPM          /* max num of undo entries per process */
-#define SEMMNU  SEMMNS          /* num of undo structures system wide */
-#define SEMMAP  SEMMNS          /* # of entries in semaphore map */
-#define SEMUSZ  20		/* sizeof struct sem_undo */
-
-#ifdef __KERNEL__
-#include <linux/atomic.h>
-#include <linux/rcupdate.h>
-#include <linux/cache.h>
-
-struct task_struct;
-
-/* One sem_array data structure for each set of semaphores in the system. */
-struct sem_array {
-	struct kern_ipc_perm	____cacheline_aligned_in_smp
-				sem_perm;	/* permissions .. see ipc.h */
-	time_t			sem_otime;	/* last semop time */
-	time_t			sem_ctime;	/* last change time */
-	struct sem		*sem_base;	/* ptr to first semaphore in array */
-	struct list_head	sem_pending;	/* pending operations to be processed */
-	struct list_head	list_id;	/* undo requests on this array */
-	int			sem_nsems;	/* no. of semaphores in array */
-	int			complex_count;	/* pending complex operations */
-};
-
-#ifdef CONFIG_SYSVIPC
-
-struct sysv_sem {
-	struct sem_undo_list *undo_list;
-};
-
-extern int copy_semundo(unsigned long clone_flags, struct task_struct *tsk);
-extern void exit_sem(struct task_struct *tsk);
-
-#else
-
-struct sysv_sem {
-	/* empty */
-};
-
-static inline int copy_semundo(unsigned long clone_flags, struct task_struct *tsk)
-{
-	return 0;
-}
-
-static inline void exit_sem(struct task_struct *tsk)
-{
-	return;
-}
-#endif
-
-#endif /* __KERNEL__ */
-
-#endif /* _LINUX_SEM_H */
diff --git a/ANDROID_3.4.5/include/linux/semaphore.h b/ANDROID_3.4.5/include/linux/semaphore.h
deleted file mode 100644
index dc368b8c..00000000
--- a/ANDROID_3.4.5/include/linux/semaphore.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- * Copyright (c) 2008 Intel Corporation
- * Author: Matthew Wilcox <willy@linux.intel.com>
- *
- * Distributed under the terms of the GNU GPL, version 2
- *
- * Please see kernel/semaphore.c for documentation of these functions
- */
-#ifndef __LINUX_SEMAPHORE_H
-#define __LINUX_SEMAPHORE_H
-
-#include <linux/list.h>
-#include <linux/spinlock.h>
-
-/* Please don't access any members of this structure directly */
-struct semaphore {
-	raw_spinlock_t		lock;
-	unsigned int		count;
-	struct list_head	wait_list;
-};
-
-#define __SEMAPHORE_INITIALIZER(name, n)				\
-{									\
-	.lock		= __RAW_SPIN_LOCK_UNLOCKED((name).lock),	\
-	.count		= n,						\
-	.wait_list	= LIST_HEAD_INIT((name).wait_list),		\
-}
-
-#define DEFINE_SEMAPHORE(name)	\
-	struct semaphore name = __SEMAPHORE_INITIALIZER(name, 1)
-
-static inline void sema_init(struct semaphore *sem, int val)
-{
-	static struct lock_class_key __key;
-	*sem = (struct semaphore) __SEMAPHORE_INITIALIZER(*sem, val);
-	lockdep_init_map(&sem->lock.dep_map, "semaphore->lock", &__key, 0);
-}
-
-extern void down(struct semaphore *sem);
-extern int __must_check down_interruptible(struct semaphore *sem);
-extern int __must_check down_killable(struct semaphore *sem);
-extern int __must_check down_trylock(struct semaphore *sem);
-extern int __must_check down_timeout(struct semaphore *sem, long jiffies);
-extern void up(struct semaphore *sem);
-
-#endif /* __LINUX_SEMAPHORE_H */
diff --git a/ANDROID_3.4.5/include/linux/seq_file.h b/ANDROID_3.4.5/include/linux/seq_file.h
deleted file mode 100644
index fc61854f..00000000
--- a/ANDROID_3.4.5/include/linux/seq_file.h
+++ /dev/null
@@ -1,160 +0,0 @@
-#ifndef _LINUX_SEQ_FILE_H
-#define _LINUX_SEQ_FILE_H
-
-#include <linux/types.h>
-#include <linux/string.h>
-#include <linux/bug.h>
-#include <linux/mutex.h>
-#include <linux/cpumask.h>
-#include <linux/nodemask.h>
-
-struct seq_operations;
-struct file;
-struct path;
-struct inode;
-struct dentry;
-
-struct seq_file {
-	char *buf;
-	size_t size;
-	size_t from;
-	size_t count;
-	loff_t index;
-	loff_t read_pos;
-	u64 version;
-	struct mutex lock;
-	const struct seq_operations *op;
-	int poll_event;
-	void *private;
-};
-
-struct seq_operations {
-	void * (*start) (struct seq_file *m, loff_t *pos);
-	void (*stop) (struct seq_file *m, void *v);
-	void * (*next) (struct seq_file *m, void *v, loff_t *pos);
-	int (*show) (struct seq_file *m, void *v);
-};
-
-#define SEQ_SKIP 1
-
-/**
- * seq_get_buf - get buffer to write arbitrary data to
- * @m: the seq_file handle
- * @bufp: the beginning of the buffer is stored here
- *
- * Return the number of bytes available in the buffer, or zero if
- * there's no space.
- */
-static inline size_t seq_get_buf(struct seq_file *m, char **bufp)
-{
-	BUG_ON(m->count > m->size);
-	if (m->count < m->size)
-		*bufp = m->buf + m->count;
-	else
-		*bufp = NULL;
-
-	return m->size - m->count;
-}
-
-/**
- * seq_commit - commit data to the buffer
- * @m: the seq_file handle
- * @num: the number of bytes to commit
- *
- * Commit @num bytes of data written to a buffer previously acquired
- * by seq_buf_get.  To signal an error condition, or that the data
- * didn't fit in the available space, pass a negative @num value.
- */
-static inline void seq_commit(struct seq_file *m, int num)
-{
-	if (num < 0) {
-		m->count = m->size;
-	} else {
-		BUG_ON(m->count + num > m->size);
-		m->count += num;
-	}
-}
-
-char *mangle_path(char *s, const char *p, const char *esc);
-int seq_open(struct file *, const struct seq_operations *);
-ssize_t seq_read(struct file *, char __user *, size_t, loff_t *);
-loff_t seq_lseek(struct file *, loff_t, int);
-int seq_release(struct inode *, struct file *);
-int seq_escape(struct seq_file *, const char *, const char *);
-int seq_putc(struct seq_file *m, char c);
-int seq_puts(struct seq_file *m, const char *s);
-int seq_write(struct seq_file *seq, const void *data, size_t len);
-
-__printf(2, 3) int seq_printf(struct seq_file *, const char *, ...);
-
-int seq_path(struct seq_file *, const struct path *, const char *);
-int seq_dentry(struct seq_file *, struct dentry *, const char *);
-int seq_path_root(struct seq_file *m, const struct path *path,
-		  const struct path *root, const char *esc);
-int seq_bitmap(struct seq_file *m, const unsigned long *bits,
-				   unsigned int nr_bits);
-static inline int seq_cpumask(struct seq_file *m, const struct cpumask *mask)
-{
-	return seq_bitmap(m, cpumask_bits(mask), nr_cpu_ids);
-}
-
-static inline int seq_nodemask(struct seq_file *m, nodemask_t *mask)
-{
-	return seq_bitmap(m, mask->bits, MAX_NUMNODES);
-}
-
-int seq_bitmap_list(struct seq_file *m, const unsigned long *bits,
-		unsigned int nr_bits);
-
-static inline int seq_cpumask_list(struct seq_file *m,
-				   const struct cpumask *mask)
-{
-	return seq_bitmap_list(m, cpumask_bits(mask), nr_cpu_ids);
-}
-
-static inline int seq_nodemask_list(struct seq_file *m, nodemask_t *mask)
-{
-	return seq_bitmap_list(m, mask->bits, MAX_NUMNODES);
-}
-
-int single_open(struct file *, int (*)(struct seq_file *, void *), void *);
-int single_release(struct inode *, struct file *);
-void *__seq_open_private(struct file *, const struct seq_operations *, int);
-int seq_open_private(struct file *, const struct seq_operations *, int);
-int seq_release_private(struct inode *, struct file *);
-int seq_put_decimal_ull(struct seq_file *m, char delimiter,
-			unsigned long long num);
-int seq_put_decimal_ll(struct seq_file *m, char delimiter,
-			long long num);
-
-#define SEQ_START_TOKEN ((void *)1)
-/*
- * Helpers for iteration over list_head-s in seq_files
- */
-
-extern struct list_head *seq_list_start(struct list_head *head,
-		loff_t pos);
-extern struct list_head *seq_list_start_head(struct list_head *head,
-		loff_t pos);
-extern struct list_head *seq_list_next(void *v, struct list_head *head,
-		loff_t *ppos);
-
-/*
- * Helpers for iteration over hlist_head-s in seq_files
- */
-
-extern struct hlist_node *seq_hlist_start(struct hlist_head *head,
-					  loff_t pos);
-extern struct hlist_node *seq_hlist_start_head(struct hlist_head *head,
-					       loff_t pos);
-extern struct hlist_node *seq_hlist_next(void *v, struct hlist_head *head,
-					 loff_t *ppos);
-
-extern struct hlist_node *seq_hlist_start_rcu(struct hlist_head *head,
-					      loff_t pos);
-extern struct hlist_node *seq_hlist_start_head_rcu(struct hlist_head *head,
-						   loff_t pos);
-extern struct hlist_node *seq_hlist_next_rcu(void *v,
-						   struct hlist_head *head,
-						   loff_t *ppos);
-#endif
diff --git a/ANDROID_3.4.5/include/linux/seq_file_net.h b/ANDROID_3.4.5/include/linux/seq_file_net.h
deleted file mode 100644
index 32c89bbe..00000000
--- a/ANDROID_3.4.5/include/linux/seq_file_net.h
+++ /dev/null
@@ -1,30 +0,0 @@
-#ifndef __SEQ_FILE_NET_H__
-#define __SEQ_FILE_NET_H__
-
-#include <linux/seq_file.h>
-
-struct net;
-extern struct net init_net;
-
-struct seq_net_private {
-#ifdef CONFIG_NET_NS
-	struct net *net;
-#endif
-};
-
-int seq_open_net(struct inode *, struct file *,
-		 const struct seq_operations *, int);
-int single_open_net(struct inode *, struct file *file,
-		int (*show)(struct seq_file *, void *));
-int seq_release_net(struct inode *, struct file *);
-int single_release_net(struct inode *, struct file *);
-static inline struct net *seq_file_net(struct seq_file *seq)
-{
-#ifdef CONFIG_NET_NS
-	return ((struct seq_net_private *)seq->private)->net;
-#else
-	return &init_net;
-#endif
-}
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/seqlock.h b/ANDROID_3.4.5/include/linux/seqlock.h
deleted file mode 100644
index 600060e2..00000000
--- a/ANDROID_3.4.5/include/linux/seqlock.h
+++ /dev/null
@@ -1,282 +0,0 @@
-#ifndef __LINUX_SEQLOCK_H
-#define __LINUX_SEQLOCK_H
-/*
- * Reader/writer consistent mechanism without starving writers. This type of
- * lock for data where the reader wants a consistent set of information
- * and is willing to retry if the information changes.  Readers never
- * block but they may have to retry if a writer is in
- * progress. Writers do not wait for readers. 
- *
- * This is not as cache friendly as brlock. Also, this will not work
- * for data that contains pointers, because any writer could
- * invalidate a pointer that a reader was following.
- *
- * Expected reader usage:
- * 	do {
- *	    seq = read_seqbegin(&foo);
- * 	...
- *      } while (read_seqretry(&foo, seq));
- *
- *
- * On non-SMP the spin locks disappear but the writer still needs
- * to increment the sequence variables because an interrupt routine could
- * change the state of the data.
- *
- * Based on x86_64 vsyscall gettimeofday 
- * by Keith Owens and Andrea Arcangeli
- */
-
-#include <linux/spinlock.h>
-#include <linux/preempt.h>
-#include <asm/processor.h>
-
-typedef struct {
-	unsigned sequence;
-	spinlock_t lock;
-} seqlock_t;
-
-/*
- * These macros triggered gcc-3.x compile-time problems.  We think these are
- * OK now.  Be cautious.
- */
-#define __SEQLOCK_UNLOCKED(lockname) \
-		 { 0, __SPIN_LOCK_UNLOCKED(lockname) }
-
-#define seqlock_init(x)					\
-	do {						\
-		(x)->sequence = 0;			\
-		spin_lock_init(&(x)->lock);		\
-	} while (0)
-
-#define DEFINE_SEQLOCK(x) \
-		seqlock_t x = __SEQLOCK_UNLOCKED(x)
-
-/* Lock out other writers and update the count.
- * Acts like a normal spin_lock/unlock.
- * Don't need preempt_disable() because that is in the spin_lock already.
- */
-static inline void write_seqlock(seqlock_t *sl)
-{
-	spin_lock(&sl->lock);
-	++sl->sequence;
-	smp_wmb();
-}
-
-static inline void write_sequnlock(seqlock_t *sl)
-{
-	smp_wmb();
-	sl->sequence++;
-	spin_unlock(&sl->lock);
-}
-
-static inline int write_tryseqlock(seqlock_t *sl)
-{
-	int ret = spin_trylock(&sl->lock);
-
-	if (ret) {
-		++sl->sequence;
-		smp_wmb();
-	}
-	return ret;
-}
-
-/* Start of read calculation -- fetch last complete writer token */
-static __always_inline unsigned read_seqbegin(const seqlock_t *sl)
-{
-	unsigned ret;
-
-repeat:
-	ret = ACCESS_ONCE(sl->sequence);
-	if (unlikely(ret & 1)) {
-		cpu_relax();
-		goto repeat;
-	}
-	smp_rmb();
-
-	return ret;
-}
-
-/*
- * Test if reader processed invalid data.
- *
- * If sequence value changed then writer changed data while in section.
- */
-static __always_inline int read_seqretry(const seqlock_t *sl, unsigned start)
-{
-	smp_rmb();
-
-	return unlikely(sl->sequence != start);
-}
-
-
-/*
- * Version using sequence counter only.
- * This can be used when code has its own mutex protecting the
- * updating starting before the write_seqcountbeqin() and ending
- * after the write_seqcount_end().
- */
-
-typedef struct seqcount {
-	unsigned sequence;
-} seqcount_t;
-
-#define SEQCNT_ZERO { 0 }
-#define seqcount_init(x)	do { *(x) = (seqcount_t) SEQCNT_ZERO; } while (0)
-
-/**
- * __read_seqcount_begin - begin a seq-read critical section (without barrier)
- * @s: pointer to seqcount_t
- * Returns: count to be passed to read_seqcount_retry
- *
- * __read_seqcount_begin is like read_seqcount_begin, but has no smp_rmb()
- * barrier. Callers should ensure that smp_rmb() or equivalent ordering is
- * provided before actually loading any of the variables that are to be
- * protected in this critical section.
- *
- * Use carefully, only in critical code, and comment how the barrier is
- * provided.
- */
-static inline unsigned __read_seqcount_begin(const seqcount_t *s)
-{
-	unsigned ret;
-
-repeat:
-	ret = ACCESS_ONCE(s->sequence);
-	if (unlikely(ret & 1)) {
-		cpu_relax();
-		goto repeat;
-	}
-	return ret;
-}
-
-/**
- * read_seqcount_begin - begin a seq-read critical section
- * @s: pointer to seqcount_t
- * Returns: count to be passed to read_seqcount_retry
- *
- * read_seqcount_begin opens a read critical section of the given seqcount.
- * Validity of the critical section is tested by checking read_seqcount_retry
- * function.
- */
-static inline unsigned read_seqcount_begin(const seqcount_t *s)
-{
-	unsigned ret = __read_seqcount_begin(s);
-	smp_rmb();
-	return ret;
-}
-
-/**
- * raw_seqcount_begin - begin a seq-read critical section
- * @s: pointer to seqcount_t
- * Returns: count to be passed to read_seqcount_retry
- *
- * raw_seqcount_begin opens a read critical section of the given seqcount.
- * Validity of the critical section is tested by checking read_seqcount_retry
- * function.
- *
- * Unlike read_seqcount_begin(), this function will not wait for the count
- * to stabilize. If a writer is active when we begin, we will fail the
- * read_seqcount_retry() instead of stabilizing at the beginning of the
- * critical section.
- */
-static inline unsigned raw_seqcount_begin(const seqcount_t *s)
-{
-	unsigned ret = ACCESS_ONCE(s->sequence);
-	smp_rmb();
-	return ret & ~1;
-}
-
-/**
- * __read_seqcount_retry - end a seq-read critical section (without barrier)
- * @s: pointer to seqcount_t
- * @start: count, from read_seqcount_begin
- * Returns: 1 if retry is required, else 0
- *
- * __read_seqcount_retry is like read_seqcount_retry, but has no smp_rmb()
- * barrier. Callers should ensure that smp_rmb() or equivalent ordering is
- * provided before actually loading any of the variables that are to be
- * protected in this critical section.
- *
- * Use carefully, only in critical code, and comment how the barrier is
- * provided.
- */
-static inline int __read_seqcount_retry(const seqcount_t *s, unsigned start)
-{
-	return unlikely(s->sequence != start);
-}
-
-/**
- * read_seqcount_retry - end a seq-read critical section
- * @s: pointer to seqcount_t
- * @start: count, from read_seqcount_begin
- * Returns: 1 if retry is required, else 0
- *
- * read_seqcount_retry closes a read critical section of the given seqcount.
- * If the critical section was invalid, it must be ignored (and typically
- * retried).
- */
-static inline int read_seqcount_retry(const seqcount_t *s, unsigned start)
-{
-	smp_rmb();
-
-	return __read_seqcount_retry(s, start);
-}
-
-
-/*
- * Sequence counter only version assumes that callers are using their
- * own mutexing.
- */
-static inline void write_seqcount_begin(seqcount_t *s)
-{
-	s->sequence++;
-	smp_wmb();
-}
-
-static inline void write_seqcount_end(seqcount_t *s)
-{
-	smp_wmb();
-	s->sequence++;
-}
-
-/**
- * write_seqcount_barrier - invalidate in-progress read-side seq operations
- * @s: pointer to seqcount_t
- *
- * After write_seqcount_barrier, no read-side seq operations will complete
- * successfully and see data older than this.
- */
-static inline void write_seqcount_barrier(seqcount_t *s)
-{
-	smp_wmb();
-	s->sequence+=2;
-}
-
-/*
- * Possible sw/hw IRQ protected versions of the interfaces.
- */
-#define write_seqlock_irqsave(lock, flags)				\
-	do { local_irq_save(flags); write_seqlock(lock); } while (0)
-#define write_seqlock_irq(lock)						\
-	do { local_irq_disable();   write_seqlock(lock); } while (0)
-#define write_seqlock_bh(lock)						\
-        do { local_bh_disable();    write_seqlock(lock); } while (0)
-
-#define write_sequnlock_irqrestore(lock, flags)				\
-	do { write_sequnlock(lock); local_irq_restore(flags); } while(0)
-#define write_sequnlock_irq(lock)					\
-	do { write_sequnlock(lock); local_irq_enable(); } while(0)
-#define write_sequnlock_bh(lock)					\
-	do { write_sequnlock(lock); local_bh_enable(); } while(0)
-
-#define read_seqbegin_irqsave(lock, flags)				\
-	({ local_irq_save(flags);   read_seqbegin(lock); })
-
-#define read_seqretry_irqrestore(lock, iv, flags)			\
-	({								\
-		int ret = read_seqretry(lock, iv);			\
-		local_irq_restore(flags);				\
-		ret;							\
-	})
-
-#endif /* __LINUX_SEQLOCK_H */
diff --git a/ANDROID_3.4.5/include/linux/serial.h b/ANDROID_3.4.5/include/linux/serial.h
deleted file mode 100644
index 441980ec..00000000
--- a/ANDROID_3.4.5/include/linux/serial.h
+++ /dev/null
@@ -1,227 +0,0 @@
-/*
- * include/linux/serial.h
- *
- * Copyright (C) 1992 by Theodore Ts'o.
- * 
- * Redistribution of this file is permitted under the terms of the GNU 
- * Public License (GPL)
- */
-
-#ifndef _LINUX_SERIAL_H
-#define _LINUX_SERIAL_H
-
-#include <linux/types.h>
-
-#ifdef __KERNEL__
-#include <asm/page.h>
-
-/*
- * Counters of the input lines (CTS, DSR, RI, CD) interrupts
- */
-
-struct async_icount {
-	__u32	cts, dsr, rng, dcd, tx, rx;
-	__u32	frame, parity, overrun, brk;
-	__u32	buf_overrun;
-};
-
-/*
- * The size of the serial xmit buffer is 1 page, or 4096 bytes
- */
-#define SERIAL_XMIT_SIZE PAGE_SIZE
-
-#endif
-
-struct serial_struct {
-	int	type;
-	int	line;
-	unsigned int	port;
-	int	irq;
-	int	flags;
-	int	xmit_fifo_size;
-	int	custom_divisor;
-	int	baud_base;
-	unsigned short	close_delay;
-	char	io_type;
-	char	reserved_char[1];
-	int	hub6;
-	unsigned short	closing_wait; /* time to wait before closing */
-	unsigned short	closing_wait2; /* no longer used... */
-	unsigned char	*iomem_base;
-	unsigned short	iomem_reg_shift;
-	unsigned int	port_high;
-	unsigned long	iomap_base;	/* cookie passed into ioremap */
-};
-
-/*
- * For the close wait times, 0 means wait forever for serial port to
- * flush its output.  65535 means don't wait at all.
- */
-#define ASYNC_CLOSING_WAIT_INF	0
-#define ASYNC_CLOSING_WAIT_NONE	65535
-
-/*
- * These are the supported serial types.
- */
-#define PORT_UNKNOWN	0
-#define PORT_8250	1
-#define PORT_16450	2
-#define PORT_16550	3
-#define PORT_16550A	4
-#define PORT_CIRRUS     5	/* usurped by cyclades.c */
-#define PORT_16650	6
-#define PORT_16650V2	7
-#define PORT_16750	8
-#define PORT_STARTECH	9	/* usurped by cyclades.c */
-#define PORT_16C950	10	/* Oxford Semiconductor */
-#define PORT_16654	11
-#define PORT_16850	12
-#define PORT_RSA	13	/* RSA-DV II/S card */
-#define PORT_MAX	13
-
-#define SERIAL_IO_PORT	0
-#define SERIAL_IO_HUB6	1
-#define SERIAL_IO_MEM	2
-
-struct serial_uart_config {
-	char	*name;
-	int	dfl_xmit_fifo_size;
-	int	flags;
-};
-
-#define UART_CLEAR_FIFO		0x01
-#define UART_USE_FIFO		0x02
-#define UART_STARTECH		0x04
-#define UART_NATSEMI		0x08
-
-/*
- * Definitions for async_struct (and serial_struct) flags field
- *
- * Define ASYNCB_* for convenient use with {test,set,clear}_bit.
- */
-#define ASYNCB_HUP_NOTIFY	 0 /* Notify getty on hangups and closes
-				    * on the callout port */
-#define ASYNCB_FOURPORT		 1 /* Set OU1, OUT2 per AST Fourport settings */
-#define ASYNCB_SAK		 2 /* Secure Attention Key (Orange book) */
-#define ASYNCB_SPLIT_TERMIOS	 3 /* Separate termios for dialin/callout */
-#define ASYNCB_SPD_HI		 4 /* Use 56000 instead of 38400 bps */
-#define ASYNCB_SPD_VHI		 5 /* Use 115200 instead of 38400 bps */
-#define ASYNCB_SKIP_TEST	 6 /* Skip UART test during autoconfiguration */
-#define ASYNCB_AUTO_IRQ		 7 /* Do automatic IRQ during
-				    * autoconfiguration */
-#define ASYNCB_SESSION_LOCKOUT	 8 /* Lock out cua opens based on session */
-#define ASYNCB_PGRP_LOCKOUT	 9 /* Lock out cua opens based on pgrp */
-#define ASYNCB_CALLOUT_NOHUP	10 /* Don't do hangups for cua device */
-#define ASYNCB_HARDPPS_CD	11 /* Call hardpps when CD goes high  */
-#define ASYNCB_SPD_SHI		12 /* Use 230400 instead of 38400 bps */
-#define ASYNCB_LOW_LATENCY	13 /* Request low latency behaviour */
-#define ASYNCB_BUGGY_UART	14 /* This is a buggy UART, skip some safety
-				    * checks.  Note: can be dangerous! */
-#define ASYNCB_AUTOPROBE	15 /* Port was autoprobed by PCI or PNP code */
-#define ASYNCB_LAST_USER	15
-
-/* Internal flags used only by kernel */
-#define ASYNCB_INITIALIZED	31 /* Serial port was initialized */
-#define ASYNCB_SUSPENDED	30 /* Serial port is suspended */
-#define ASYNCB_NORMAL_ACTIVE	29 /* Normal device is active */
-#define ASYNCB_BOOT_AUTOCONF	28 /* Autoconfigure port on bootup */
-#define ASYNCB_CLOSING		27 /* Serial port is closing */
-#define ASYNCB_CTS_FLOW		26 /* Do CTS flow control */
-#define ASYNCB_CHECK_CD		25 /* i.e., CLOCAL */
-#define ASYNCB_SHARE_IRQ	24 /* for multifunction cards, no longer used */
-#define ASYNCB_CONS_FLOW	23 /* flow control for console  */
-#define ASYNCB_BOOT_ONLYMCA	22 /* Probe only if MCA bus */
-#define ASYNCB_FIRST_KERNEL	22
-
-#define ASYNC_HUP_NOTIFY	(1U << ASYNCB_HUP_NOTIFY)
-#define ASYNC_SUSPENDED		(1U << ASYNCB_SUSPENDED)
-#define ASYNC_FOURPORT		(1U << ASYNCB_FOURPORT)
-#define ASYNC_SAK		(1U << ASYNCB_SAK)
-#define ASYNC_SPLIT_TERMIOS	(1U << ASYNCB_SPLIT_TERMIOS)
-#define ASYNC_SPD_HI		(1U << ASYNCB_SPD_HI)
-#define ASYNC_SPD_VHI		(1U << ASYNCB_SPD_VHI)
-#define ASYNC_SKIP_TEST		(1U << ASYNCB_SKIP_TEST)
-#define ASYNC_AUTO_IRQ		(1U << ASYNCB_AUTO_IRQ)
-#define ASYNC_SESSION_LOCKOUT	(1U << ASYNCB_SESSION_LOCKOUT)
-#define ASYNC_PGRP_LOCKOUT	(1U << ASYNCB_PGRP_LOCKOUT)
-#define ASYNC_CALLOUT_NOHUP	(1U << ASYNCB_CALLOUT_NOHUP)
-#define ASYNC_HARDPPS_CD	(1U << ASYNCB_HARDPPS_CD)
-#define ASYNC_SPD_SHI		(1U << ASYNCB_SPD_SHI)
-#define ASYNC_LOW_LATENCY	(1U << ASYNCB_LOW_LATENCY)
-#define ASYNC_BUGGY_UART	(1U << ASYNCB_BUGGY_UART)
-#define ASYNC_AUTOPROBE		(1U << ASYNCB_AUTOPROBE)
-
-#define ASYNC_FLAGS		((1U << (ASYNCB_LAST_USER + 1)) - 1)
-#define ASYNC_USR_MASK		(ASYNC_SPD_MASK|ASYNC_CALLOUT_NOHUP| \
-		ASYNC_LOW_LATENCY)
-#define ASYNC_SPD_CUST		(ASYNC_SPD_HI|ASYNC_SPD_VHI)
-#define ASYNC_SPD_WARP		(ASYNC_SPD_HI|ASYNC_SPD_SHI)
-#define ASYNC_SPD_MASK		(ASYNC_SPD_HI|ASYNC_SPD_VHI|ASYNC_SPD_SHI)
-
-#define ASYNC_INITIALIZED	(1U << ASYNCB_INITIALIZED)
-#define ASYNC_NORMAL_ACTIVE	(1U << ASYNCB_NORMAL_ACTIVE)
-#define ASYNC_BOOT_AUTOCONF	(1U << ASYNCB_BOOT_AUTOCONF)
-#define ASYNC_CLOSING		(1U << ASYNCB_CLOSING)
-#define ASYNC_CTS_FLOW		(1U << ASYNCB_CTS_FLOW)
-#define ASYNC_CHECK_CD		(1U << ASYNCB_CHECK_CD)
-#define ASYNC_SHARE_IRQ		(1U << ASYNCB_SHARE_IRQ)
-#define ASYNC_CONS_FLOW		(1U << ASYNCB_CONS_FLOW)
-#define ASYNC_BOOT_ONLYMCA	(1U << ASYNCB_BOOT_ONLYMCA)
-#define ASYNC_INTERNAL_FLAGS	(~((1U << ASYNCB_FIRST_KERNEL) - 1))
-
-/*
- * Multiport serial configuration structure --- external structure
- */
-struct serial_multiport_struct {
-	int		irq;
-	int		port1;
-	unsigned char	mask1, match1;
-	int		port2;
-	unsigned char	mask2, match2;
-	int		port3;
-	unsigned char	mask3, match3;
-	int		port4;
-	unsigned char	mask4, match4;
-	int		port_monitor;
-	int	reserved[32];
-};
-
-/*
- * Serial input interrupt line counters -- external structure
- * Four lines can interrupt: CTS, DSR, RI, DCD
- */
-struct serial_icounter_struct {
-	int cts, dsr, rng, dcd;
-	int rx, tx;
-	int frame, overrun, parity, brk;
-	int buf_overrun;
-	int reserved[9];
-};
-
-/*
- * Serial interface for controlling RS485 settings on chips with suitable
- * support. Set with TIOCSRS485 and get with TIOCGRS485 if supported by your
- * platform. The set function returns the new state, with any unsupported bits
- * reverted appropriately.
- */
-
-struct serial_rs485 {
-	__u32	flags;			/* RS485 feature flags */
-#define SER_RS485_ENABLED		(1 << 0)	/* If enabled */
-#define SER_RS485_RTS_ON_SEND		(1 << 1)	/* Logical level for
-							   RTS pin when
-							   sending */
-#define SER_RS485_RTS_AFTER_SEND	(1 << 2)	/* Logical level for
-							   RTS pin after sent*/
-#define SER_RS485_RX_DURING_TX		(1 << 4)
-	__u32	delay_rts_before_send;	/* Delay before send (milliseconds) */
-	__u32	delay_rts_after_send;	/* Delay after send (milliseconds) */
-	__u32	padding[5];		/* Memory is cheap, new structs
-					   are a royal PITA .. */
-};
-
-#ifdef __KERNEL__
-#include <linux/compiler.h>
-
-#endif /* __KERNEL__ */
-#endif /* _LINUX_SERIAL_H */
diff --git a/ANDROID_3.4.5/include/linux/serial167.h b/ANDROID_3.4.5/include/linux/serial167.h
deleted file mode 100644
index 59c81b70..00000000
--- a/ANDROID_3.4.5/include/linux/serial167.h
+++ /dev/null
@@ -1,157 +0,0 @@
-/*
- * serial167.h
- *
- * Richard Hirst [richard@sleepie.demon.co.uk]
- *
- * Based on cyclades.h
- */
-
-struct cyclades_monitor {
-        unsigned long           int_count;
-        unsigned long           char_count;
-        unsigned long           char_max;
-        unsigned long           char_last;
-};
-
-/*
- * This is our internal structure for each serial port's state.
- * 
- * Many fields are paralleled by the structure used by the serial_struct
- * structure.
- *
- * For definitions of the flags field, see tty.h
- */
-
-struct cyclades_port {
-	int                     magic;
-	int                     type;
-	int			card;
-	int			line;
-	int			flags; 		/* defined in tty.h */
-	struct tty_struct 	*tty;
-	int			read_status_mask;
-	int			timeout;
-	int			xmit_fifo_size;
-	int                     cor1,cor2,cor3,cor4,cor5,cor6,cor7;
-	int                     tbpr,tco,rbpr,rco;
-	int			ignore_status_mask;
-	int			close_delay;
-	int			IER; 	/* Interrupt Enable Register */
-	unsigned long		last_active;
-	int			count;	/* # of fd on device */
-	int                     x_char; /* to be pushed out ASAP */
-	int                     x_break;
-	int			blocked_open; /* # of blocked opens */
-	unsigned char 		*xmit_buf;
-	int			xmit_head;
-	int			xmit_tail;
-	int			xmit_cnt;
-        int                     default_threshold;
-        int                     default_timeout;
-	wait_queue_head_t	open_wait;
-	wait_queue_head_t	close_wait;
-        struct cyclades_monitor mon;
-};
-
-#define CYCLADES_MAGIC  0x4359
-
-#define CYGETMON                0x435901
-#define CYGETTHRESH             0x435902
-#define CYSETTHRESH             0x435903
-#define CYGETDEFTHRESH          0x435904
-#define CYSETDEFTHRESH          0x435905
-#define CYGETTIMEOUT            0x435906
-#define CYSETTIMEOUT            0x435907
-#define CYGETDEFTIMEOUT         0x435908
-#define CYSETDEFTIMEOUT         0x435909
-
-#define CyMaxChipsPerCard 1
-
-/**** cd2401 registers ****/
-
-#define CyGFRCR         (0x81)
-#define CyCCR		(0x13)
-#define      CyCLR_CHAN		(0x40)
-#define      CyINIT_CHAN	(0x20)
-#define      CyCHIP_RESET	(0x10)
-#define      CyENB_XMTR		(0x08)
-#define      CyDIS_XMTR		(0x04)
-#define      CyENB_RCVR		(0x02)
-#define      CyDIS_RCVR		(0x01)
-#define CyCAR		(0xee)
-#define CyIER		(0x11)
-#define      CyMdmCh		(0x80)
-#define      CyRxExc		(0x20)
-#define      CyRxData		(0x08)
-#define      CyTxMpty		(0x02)
-#define      CyTxRdy		(0x01)
-#define CyLICR		(0x26)
-#define CyRISR		(0x89)
-#define      CyTIMEOUT		(0x80)
-#define      CySPECHAR		(0x70)
-#define      CyOVERRUN		(0x08)
-#define      CyPARITY		(0x04)
-#define      CyFRAME		(0x02)
-#define      CyBREAK		(0x01)
-#define CyREOIR		(0x84)
-#define CyTEOIR		(0x85)
-#define CyMEOIR		(0x86)
-#define      CyNOTRANS		(0x08)
-#define CyRFOC		(0x30)
-#define CyRDR		(0xf8)
-#define CyTDR		(0xf8)
-#define CyMISR		(0x8b)
-#define CyRISR		(0x89)
-#define CyTISR		(0x8a)
-#define CyMSVR1		(0xde)
-#define CyMSVR2		(0xdf)
-#define      CyDSR		(0x80)
-#define      CyDCD		(0x40)
-#define      CyCTS		(0x20)
-#define      CyDTR		(0x02)
-#define      CyRTS		(0x01)
-#define CyRTPRL		(0x25)
-#define CyRTPRH		(0x24)
-#define CyCOR1		(0x10)
-#define      CyPARITY_NONE	(0x00)
-#define      CyPARITY_E		(0x40)
-#define      CyPARITY_O		(0xC0)
-#define      Cy_5_BITS		(0x04)
-#define      Cy_6_BITS		(0x05)
-#define      Cy_7_BITS		(0x06)
-#define      Cy_8_BITS		(0x07)
-#define CyCOR2		(0x17)
-#define      CyETC		(0x20)
-#define      CyCtsAE		(0x02)
-#define CyCOR3		(0x16)
-#define      Cy_1_STOP		(0x02)
-#define      Cy_2_STOP		(0x04)
-#define CyCOR4		(0x15)
-#define      CyREC_FIFO		(0x0F)  /* Receive FIFO threshold */
-#define CyCOR5		(0x14)
-#define CyCOR6		(0x18)
-#define CyCOR7		(0x07)
-#define CyRBPR		(0xcb)
-#define CyRCOR		(0xc8)
-#define CyTBPR		(0xc3)
-#define CyTCOR		(0xc0)
-#define CySCHR1		(0x1f)
-#define CySCHR2 	(0x1e)
-#define CyTPR		(0xda)
-#define CyPILR1		(0xe3)
-#define CyPILR2		(0xe0)
-#define CyPILR3		(0xe1)
-#define CyCMR		(0x1b)
-#define      CyASYNC		(0x02)
-#define CyLICR          (0x26)
-#define CyLIVR          (0x09)
-#define CySCRL		(0x23)
-#define CySCRH		(0x22)
-#define CyTFTC		(0x80)
-
-
-/* max number of chars in the FIFO */
-
-#define CyMAX_CHAR_FIFO	12
-
-/***************************************************************************/
diff --git a/ANDROID_3.4.5/include/linux/serial_8250.h b/ANDROID_3.4.5/include/linux/serial_8250.h
deleted file mode 100644
index 8f012f8a..00000000
--- a/ANDROID_3.4.5/include/linux/serial_8250.h
+++ /dev/null
@@ -1,95 +0,0 @@
-/*
- *  linux/include/linux/serial_8250.h
- *
- *  Copyright (C) 2004 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-#ifndef _LINUX_SERIAL_8250_H
-#define _LINUX_SERIAL_8250_H
-
-#include <linux/serial_core.h>
-#include <linux/platform_device.h>
-
-/*
- * This is the platform device platform_data structure
- */
-struct plat_serial8250_port {
-	unsigned long	iobase;		/* io base address */
-	void __iomem	*membase;	/* ioremap cookie or NULL */
-	resource_size_t	mapbase;	/* resource base */
-	unsigned int	irq;		/* interrupt number */
-	unsigned long	irqflags;	/* request_irq flags */
-	unsigned int	uartclk;	/* UART clock rate */
-	void            *private_data;
-	unsigned char	regshift;	/* register shift */
-	unsigned char	iotype;		/* UPIO_* */
-	unsigned char	hub6;
-	upf_t		flags;		/* UPF_* flags */
-	unsigned int	type;		/* If UPF_FIXED_TYPE */
-	unsigned int	(*serial_in)(struct uart_port *, int);
-	void		(*serial_out)(struct uart_port *, int, int);
-	void		(*set_termios)(struct uart_port *,
-			               struct ktermios *new,
-			               struct ktermios *old);
-	int		(*handle_irq)(struct uart_port *);
-	void		(*pm)(struct uart_port *, unsigned int state,
-			      unsigned old);
-};
-
-/*
- * Allocate 8250 platform device IDs.  Nothing is implied by
- * the numbering here, except for the legacy entry being -1.
- */
-enum {
-	PLAT8250_DEV_LEGACY = -1,
-	PLAT8250_DEV_PLATFORM,
-	PLAT8250_DEV_PLATFORM1,
-	PLAT8250_DEV_PLATFORM2,
-	PLAT8250_DEV_FOURPORT,
-	PLAT8250_DEV_ACCENT,
-	PLAT8250_DEV_BOCA,
-	PLAT8250_DEV_EXAR_ST16C554,
-	PLAT8250_DEV_HUB6,
-	PLAT8250_DEV_MCA,
-	PLAT8250_DEV_AU1X00,
-	PLAT8250_DEV_SM501,
-};
-
-/*
- * This should be used by drivers which want to register
- * their own 8250 ports without registering their own
- * platform device.  Using these will make your driver
- * dependent on the 8250 driver.
- */
-struct uart_port;
-struct uart_8250_port;
-
-int serial8250_register_port(struct uart_port *);
-void serial8250_unregister_port(int line);
-void serial8250_suspend_port(int line);
-void serial8250_resume_port(int line);
-
-extern int early_serial_setup(struct uart_port *port);
-
-extern int serial8250_find_port(struct uart_port *p);
-extern int serial8250_find_port_for_earlycon(void);
-extern int setup_early_serial8250_console(char *cmdline);
-extern void serial8250_do_set_termios(struct uart_port *port,
-		struct ktermios *termios, struct ktermios *old);
-extern void serial8250_do_pm(struct uart_port *port, unsigned int state,
-			     unsigned int oldstate);
-extern int fsl8250_handle_irq(struct uart_port *port);
-int serial8250_handle_irq(struct uart_port *port, unsigned int iir);
-unsigned char serial8250_rx_chars(struct uart_8250_port *up, unsigned char lsr);
-void serial8250_tx_chars(struct uart_8250_port *up);
-unsigned int serial8250_modem_status(struct uart_8250_port *up);
-
-extern void serial8250_set_isa_configurator(void (*v)
-					(int port, struct uart_port *up,
-						unsigned short *capabilities));
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/serial_core.h b/ANDROID_3.4.5/include/linux/serial_core.h
deleted file mode 100644
index 828c8037..00000000
--- a/ANDROID_3.4.5/include/linux/serial_core.h
+++ /dev/null
@@ -1,560 +0,0 @@
-/*
- *  linux/drivers/char/serial_core.h
- *
- *  Copyright (C) 2000 Deep Blue Solutions Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef LINUX_SERIAL_CORE_H
-#define LINUX_SERIAL_CORE_H
-
-#include <linux/serial.h>
-
-/*
- * The type definitions.  These are from Ted Ts'o's serial.h
- */
-#define PORT_UNKNOWN	0
-#define PORT_8250	1
-#define PORT_16450	2
-#define PORT_16550	3
-#define PORT_16550A	4
-#define PORT_CIRRUS	5
-#define PORT_16650	6
-#define PORT_16650V2	7
-#define PORT_16750	8
-#define PORT_STARTECH	9
-#define PORT_16C950	10
-#define PORT_16654	11
-#define PORT_16850	12
-#define PORT_RSA	13
-#define PORT_NS16550A	14
-#define PORT_XSCALE	15
-#define PORT_RM9000	16	/* PMC-Sierra RM9xxx internal UART */
-#define PORT_OCTEON	17	/* Cavium OCTEON internal UART */
-#define PORT_AR7	18	/* Texas Instruments AR7 internal UART */
-#define PORT_U6_16550A	19	/* ST-Ericsson U6xxx internal UART */
-#define PORT_TEGRA	20	/* NVIDIA Tegra internal UART */
-#define PORT_XR17D15X	21	/* Exar XR17D15x UART */
-#define PORT_MAX_8250	21	/* max port ID */
-
-/*
- * ARM specific type numbers.  These are not currently guaranteed
- * to be implemented, and will change in the future.  These are
- * separate so any additions to the old serial.c that occur before
- * we are merged can be easily merged here.
- */
-#define PORT_PXA	31
-#define PORT_AMBA	32
-#define PORT_CLPS711X	33
-#define PORT_SA1100	34
-#define PORT_UART00	35
-#define PORT_21285	37
-
-/* Sparc type numbers.  */
-#define PORT_SUNZILOG	38
-#define PORT_SUNSAB	39
-
-/* DEC */
-#define PORT_DZ		46
-#define PORT_ZS		47
-
-/* Parisc type numbers. */
-#define PORT_MUX	48
-
-/* Atmel AT91 / AT32 SoC */
-#define PORT_ATMEL	49
-
-/* Macintosh Zilog type numbers */
-#define PORT_MAC_ZILOG	50	/* m68k : not yet implemented */
-#define PORT_PMAC_ZILOG	51
-
-/* SH-SCI */
-#define PORT_SCI	52
-#define PORT_SCIF	53
-#define PORT_IRDA	54
-
-/* Samsung S3C2410 SoC and derivatives thereof */
-#define PORT_S3C2410    55
-
-/* SGI IP22 aka Indy / Challenge S / Indigo 2 */
-#define PORT_IP22ZILOG	56
-
-/* Sharp LH7a40x -- an ARM9 SoC series */
-#define PORT_LH7A40X	57
-
-/* PPC CPM type number */
-#define PORT_CPM        58
-
-/* MPC52xx (and MPC512x) type numbers */
-#define PORT_MPC52xx	59
-
-/* IBM icom */
-#define PORT_ICOM	60
-
-/* Samsung S3C2440 SoC */
-#define PORT_S3C2440	61
-
-/* Motorola i.MX SoC */
-#define PORT_IMX	62
-
-/* Marvell MPSC */
-#define PORT_MPSC	63
-
-/* TXX9 type number */
-#define PORT_TXX9	64
-
-/* NEC VR4100 series SIU/DSIU */
-#define PORT_VR41XX_SIU		65
-#define PORT_VR41XX_DSIU	66
-
-/* Samsung S3C2400 SoC */
-#define PORT_S3C2400	67
-
-/* M32R SIO */
-#define PORT_M32R_SIO	68
-
-/*Digi jsm */
-#define PORT_JSM        69
-
-#define PORT_PNX8XXX	70
-
-/* Hilscher netx */
-#define PORT_NETX	71
-
-/* SUN4V Hypervisor Console */
-#define PORT_SUNHV	72
-
-#define PORT_S3C2412	73
-
-/* Xilinx uartlite */
-#define PORT_UARTLITE	74
-
-/* Blackfin bf5xx */
-#define PORT_BFIN	75
-
-/* Micrel KS8695 */
-#define PORT_KS8695	76
-
-/* Broadcom SB1250, etc. SOC */
-#define PORT_SB1250_DUART	77
-
-/* Freescale ColdFire */
-#define PORT_MCF	78
-
-/* Blackfin SPORT */
-#define PORT_BFIN_SPORT		79
-
-/* MN10300 on-chip UART numbers */
-#define PORT_MN10300		80
-#define PORT_MN10300_CTS	81
-
-#define PORT_SC26XX	82
-
-/* SH-SCI */
-#define PORT_SCIFA	83
-
-#define PORT_S3C6400	84
-
-/* NWPSERIAL */
-#define PORT_NWPSERIAL	85
-
-/* MAX3100 */
-#define PORT_MAX3100    86
-
-/* Timberdale UART */
-#define PORT_TIMBUART	87
-
-/* Qualcomm MSM SoCs */
-#define PORT_MSM	88
-
-/* BCM63xx family SoCs */
-#define PORT_BCM63XX	89
-
-/* Aeroflex Gaisler GRLIB APBUART */
-#define PORT_APBUART    90
-
-/* Altera UARTs */
-#define PORT_ALTERA_JTAGUART	91
-#define PORT_ALTERA_UART	92
-
-/* SH-SCI */
-#define PORT_SCIFB	93
-
-/* MAX3107 */
-#define PORT_MAX3107	94
-
-/* High Speed UART for Medfield */
-#define PORT_MFD	95
-
-/* TI OMAP-UART */
-#define PORT_OMAP	96
-
-/* VIA VT8500 SoC */
-#define PORT_VT8500	97
-
-/* Xilinx PSS UART */
-#define PORT_XUARTPS	98
-
-/* Atheros AR933X SoC */
-#define PORT_AR933X	99
-
-/* Energy Micro efm32 SoC */
-#define PORT_EFMUART   100
-
-#ifdef __KERNEL__
-
-#include <linux/compiler.h>
-#include <linux/interrupt.h>
-#include <linux/circ_buf.h>
-#include <linux/spinlock.h>
-#include <linux/sched.h>
-#include <linux/tty.h>
-#include <linux/mutex.h>
-#include <linux/sysrq.h>
-#include <linux/pps_kernel.h>
-
-struct uart_port;
-struct serial_struct;
-struct device;
-
-/*
- * This structure describes all the operations that can be
- * done on the physical hardware.
- */
-struct uart_ops {
-	unsigned int	(*tx_empty)(struct uart_port *);
-	void		(*set_mctrl)(struct uart_port *, unsigned int mctrl);
-	unsigned int	(*get_mctrl)(struct uart_port *);
-	void		(*stop_tx)(struct uart_port *);
-	void		(*start_tx)(struct uart_port *);
-	void		(*send_xchar)(struct uart_port *, char ch);
-	void		(*stop_rx)(struct uart_port *);
-	void		(*enable_ms)(struct uart_port *);
-	void		(*break_ctl)(struct uart_port *, int ctl);
-	int		(*startup)(struct uart_port *);
-	void		(*shutdown)(struct uart_port *);
-	void		(*flush_buffer)(struct uart_port *);
-	void		(*set_termios)(struct uart_port *, struct ktermios *new,
-				       struct ktermios *old);
-	void		(*set_ldisc)(struct uart_port *, int new);
-	void		(*pm)(struct uart_port *, unsigned int state,
-			      unsigned int oldstate);
-	int		(*set_wake)(struct uart_port *, unsigned int state);
-	void		(*wake_peer)(struct uart_port *);
-
-	/*
-	 * Return a string describing the type of the port
-	 */
-	const char *(*type)(struct uart_port *);
-
-	/*
-	 * Release IO and memory resources used by the port.
-	 * This includes iounmap if necessary.
-	 */
-	void		(*release_port)(struct uart_port *);
-
-	/*
-	 * Request IO and memory resources used by the port.
-	 * This includes iomapping the port if necessary.
-	 */
-	int		(*request_port)(struct uart_port *);
-	void		(*config_port)(struct uart_port *, int);
-	int		(*verify_port)(struct uart_port *, struct serial_struct *);
-	int		(*ioctl)(struct uart_port *, unsigned int, unsigned long);
-#ifdef CONFIG_CONSOLE_POLL
-	void	(*poll_put_char)(struct uart_port *, unsigned char);
-	int		(*poll_get_char)(struct uart_port *);
-#endif
-};
-
-#define NO_POLL_CHAR		0x00ff0000
-#define UART_CONFIG_TYPE	(1 << 0)
-#define UART_CONFIG_IRQ		(1 << 1)
-
-struct uart_icount {
-	__u32	cts;
-	__u32	dsr;
-	__u32	rng;
-	__u32	dcd;
-	__u32	rx;
-	__u32	tx;
-	__u32	frame;
-	__u32	overrun;
-	__u32	parity;
-	__u32	brk;
-	__u32	buf_overrun;
-};
-
-typedef unsigned int __bitwise__ upf_t;
-
-struct uart_port {
-	spinlock_t		lock;			/* port lock */
-	unsigned long		iobase;			/* in/out[bwl] */
-	unsigned char __iomem	*membase;		/* read/write[bwl] */
-	unsigned int		(*serial_in)(struct uart_port *, int);
-	void			(*serial_out)(struct uart_port *, int, int);
-	void			(*set_termios)(struct uart_port *,
-				               struct ktermios *new,
-				               struct ktermios *old);
-	int			(*handle_irq)(struct uart_port *);
-	void			(*pm)(struct uart_port *, unsigned int state,
-				      unsigned int old);
-	unsigned int		irq;			/* irq number */
-	unsigned long		irqflags;		/* irq flags  */
-	unsigned int		uartclk;		/* base uart clock */
-	unsigned int		fifosize;		/* tx fifo size */
-	unsigned char		x_char;			/* xon/xoff char */
-	unsigned char		regshift;		/* reg offset shift */
-	unsigned char		iotype;			/* io access style */
-	unsigned char		unused1;
-
-#define UPIO_PORT		(0)
-#define UPIO_HUB6		(1)
-#define UPIO_MEM		(2)
-#define UPIO_MEM32		(3)
-#define UPIO_AU			(4)			/* Au1x00 type IO */
-#define UPIO_TSI		(5)			/* Tsi108/109 type IO */
-#define UPIO_RM9000		(6)			/* RM9000 type IO */
-
-	unsigned int		read_status_mask;	/* driver specific */
-	unsigned int		ignore_status_mask;	/* driver specific */
-	struct uart_state	*state;			/* pointer to parent state */
-	struct uart_icount	icount;			/* statistics */
-
-	struct console		*cons;			/* struct console, if any */
-#if defined(CONFIG_SERIAL_CORE_CONSOLE) || defined(SUPPORT_SYSRQ)
-	unsigned long		sysrq;			/* sysrq timeout */
-#endif
-
-	upf_t			flags;
-
-#define UPF_FOURPORT		((__force upf_t) (1 << 1))
-#define UPF_SAK			((__force upf_t) (1 << 2))
-#define UPF_SPD_MASK		((__force upf_t) (0x1030))
-#define UPF_SPD_HI		((__force upf_t) (0x0010))
-#define UPF_SPD_VHI		((__force upf_t) (0x0020))
-#define UPF_SPD_CUST		((__force upf_t) (0x0030))
-#define UPF_SPD_SHI		((__force upf_t) (0x1000))
-#define UPF_SPD_WARP		((__force upf_t) (0x1010))
-#define UPF_SKIP_TEST		((__force upf_t) (1 << 6))
-#define UPF_AUTO_IRQ		((__force upf_t) (1 << 7))
-#define UPF_HARDPPS_CD		((__force upf_t) (1 << 11))
-#define UPF_LOW_LATENCY		((__force upf_t) (1 << 13))
-#define UPF_BUGGY_UART		((__force upf_t) (1 << 14))
-#define UPF_NO_TXEN_TEST	((__force upf_t) (1 << 15))
-#define UPF_MAGIC_MULTIPLIER	((__force upf_t) (1 << 16))
-#define UPF_CONS_FLOW		((__force upf_t) (1 << 23))
-#define UPF_SHARE_IRQ		((__force upf_t) (1 << 24))
-#define UPF_EXAR_EFR		((__force upf_t) (1 << 25))
-#define UPF_BUG_THRE		((__force upf_t) (1 << 26))
-/* The exact UART type is known and should not be probed.  */
-#define UPF_FIXED_TYPE		((__force upf_t) (1 << 27))
-#define UPF_BOOT_AUTOCONF	((__force upf_t) (1 << 28))
-#define UPF_FIXED_PORT		((__force upf_t) (1 << 29))
-#define UPF_DEAD		((__force upf_t) (1 << 30))
-#define UPF_IOREMAP		((__force upf_t) (1 << 31))
-
-#define UPF_CHANGE_MASK		((__force upf_t) (0x17fff))
-#define UPF_USR_MASK		((__force upf_t) (UPF_SPD_MASK|UPF_LOW_LATENCY))
-
-	unsigned int		mctrl;			/* current modem ctrl settings */
-	unsigned int		timeout;		/* character-based timeout */
-	unsigned int		type;			/* port type */
-	const struct uart_ops	*ops;
-	unsigned int		custom_divisor;
-	unsigned int		line;			/* port index */
-	resource_size_t		mapbase;		/* for ioremap */
-	struct device		*dev;			/* parent device */
-	unsigned char		hub6;			/* this should be in the 8250 driver */
-	unsigned char		suspended;
-	unsigned char		irq_wake;
-	unsigned char		unused[2];
-	void			*private_data;		/* generic platform data pointer */
-};
-
-static inline int serial_port_in(struct uart_port *up, int offset)
-{
-	return up->serial_in(up, offset);
-}
-
-static inline void serial_port_out(struct uart_port *up, int offset, int value)
-{
-	up->serial_out(up, offset, value);
-}
-
-/*
- * This is the state information which is persistent across opens.
- */
-struct uart_state {
-	struct tty_port		port;
-
-	int			pm_state;
-	struct circ_buf		xmit;
-
-	struct uart_port	*uart_port;
-};
-
-#define UART_XMIT_SIZE	PAGE_SIZE
-
-
-/* number of characters left in xmit buffer before we ask for more */
-#define WAKEUP_CHARS		256
-
-struct module;
-struct tty_driver;
-
-struct uart_driver {
-	struct module		*owner;
-	const char		*driver_name;
-	const char		*dev_name;
-	int			 major;
-	int			 minor;
-	int			 nr;
-	struct console		*cons;
-
-	/*
-	 * these are private; the low level driver should not
-	 * touch these; they should be initialised to NULL
-	 */
-	struct uart_state	*state;
-	struct tty_driver	*tty_driver;
-};
-
-void uart_write_wakeup(struct uart_port *port);
-
-/*
- * Baud rate helpers.
- */
-void uart_update_timeout(struct uart_port *port, unsigned int cflag,
-			 unsigned int baud);
-unsigned int uart_get_baud_rate(struct uart_port *port, struct ktermios *termios,
-				struct ktermios *old, unsigned int min,
-				unsigned int max);
-unsigned int uart_get_divisor(struct uart_port *port, unsigned int baud);
-
-/* Base timer interval for polling */
-static inline int uart_poll_timeout(struct uart_port *port)
-{
-	int timeout = port->timeout;
-
-	return timeout > 6 ? (timeout / 2 - 2) : 1;
-}
-
-/*
- * Console helpers.
- */
-struct uart_port *uart_get_console(struct uart_port *ports, int nr,
-				   struct console *c);
-void uart_parse_options(char *options, int *baud, int *parity, int *bits,
-			int *flow);
-int uart_set_options(struct uart_port *port, struct console *co, int baud,
-		     int parity, int bits, int flow);
-struct tty_driver *uart_console_device(struct console *co, int *index);
-void uart_console_write(struct uart_port *port, const char *s,
-			unsigned int count,
-			void (*putchar)(struct uart_port *, int));
-
-/*
- * Port/driver registration/removal
- */
-int uart_register_driver(struct uart_driver *uart);
-void uart_unregister_driver(struct uart_driver *uart);
-int uart_add_one_port(struct uart_driver *reg, struct uart_port *port);
-int uart_remove_one_port(struct uart_driver *reg, struct uart_port *port);
-int uart_match_port(struct uart_port *port1, struct uart_port *port2);
-
-/*
- * Power Management
- */
-int uart_suspend_port(struct uart_driver *reg, struct uart_port *port);
-int uart_resume_port(struct uart_driver *reg, struct uart_port *port);
-
-#define uart_circ_empty(circ)		((circ)->head == (circ)->tail)
-#define uart_circ_clear(circ)		((circ)->head = (circ)->tail = 0)
-
-#define uart_circ_chars_pending(circ)	\
-	(CIRC_CNT((circ)->head, (circ)->tail, UART_XMIT_SIZE))
-
-#define uart_circ_chars_free(circ)	\
-	(CIRC_SPACE((circ)->head, (circ)->tail, UART_XMIT_SIZE))
-
-static inline int uart_tx_stopped(struct uart_port *port)
-{
-	struct tty_struct *tty = port->state->port.tty;
-	if(tty->stopped || tty->hw_stopped)
-		return 1;
-	return 0;
-}
-
-/*
- * The following are helper functions for the low level drivers.
- */
-
-extern void uart_handle_dcd_change(struct uart_port *uport,
-		unsigned int status);
-extern void uart_handle_cts_change(struct uart_port *uport,
-		unsigned int status);
-
-extern void uart_insert_char(struct uart_port *port, unsigned int status,
-		 unsigned int overrun, unsigned int ch, unsigned int flag);
-
-#ifdef SUPPORT_SYSRQ
-static inline int
-uart_handle_sysrq_char(struct uart_port *port, unsigned int ch)
-{
-	if (port->sysrq) {
-		if (ch && time_before(jiffies, port->sysrq)) {
-			handle_sysrq(ch);
-			port->sysrq = 0;
-			return 1;
-		}
-		port->sysrq = 0;
-	}
-	return 0;
-}
-#else
-#define uart_handle_sysrq_char(port,ch) ({ (void)port; 0; })
-#endif
-
-/*
- * We do the SysRQ and SAK checking like this...
- */
-static inline int uart_handle_break(struct uart_port *port)
-{
-	struct uart_state *state = port->state;
-#ifdef SUPPORT_SYSRQ
-	if (port->cons && port->cons->index == port->line) {
-		if (!port->sysrq) {
-			port->sysrq = jiffies + HZ*5;
-			return 1;
-		}
-		port->sysrq = 0;
-	}
-#endif
-	if (port->flags & UPF_SAK)
-		do_SAK(state->port.tty);
-	return 0;
-}
-
-/*
- *	UART_ENABLE_MS - determine if port should enable modem status irqs
- */
-#define UART_ENABLE_MS(port,cflag)	((port)->flags & UPF_HARDPPS_CD || \
-					 (cflag) & CRTSCTS || \
-					 !((cflag) & CLOCAL))
-
-#endif
-
-#endif /* LINUX_SERIAL_CORE_H */
diff --git a/ANDROID_3.4.5/include/linux/serial_max3100.h b/ANDROID_3.4.5/include/linux/serial_max3100.h
deleted file mode 100644
index 4976befb..00000000
--- a/ANDROID_3.4.5/include/linux/serial_max3100.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- *
- *  Copyright (C) 2007 Christian Pellegrin
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-
-#ifndef _LINUX_SERIAL_MAX3100_H
-#define _LINUX_SERIAL_MAX3100_H 1
-
-
-/**
- * struct plat_max3100 - MAX3100 SPI UART platform data
- * @loopback:            force MAX3100 in loopback
- * @crystal:             1 for 3.6864 Mhz, 0 for 1.8432
- * @max3100_hw_suspend:  MAX3100 has a shutdown pin. This is a hook
- *                       called on suspend and resume to activate it.
- * @poll_time:           poll time for CTS signal in ms, 0 disables (so no hw
- *                       flow ctrl is possible but you have less CPU usage)
- *
- * You should use this structure in your machine description to specify
- * how the MAX3100 is connected. Example:
- *
- * static struct plat_max3100 max3100_plat_data = {
- *  .loopback = 0,
- *  .crystal = 0,
- *  .poll_time = 100,
- * };
- *
- * static struct spi_board_info spi_board_info[] = {
- * {
- *  .modalias	= "max3100",
- *  .platform_data	= &max3100_plat_data,
- *  .irq		= IRQ_EINT12,
- *  .max_speed_hz	= 5*1000*1000,
- *  .chip_select	= 0,
- * },
- * };
- *
- **/
-struct plat_max3100 {
-	int loopback;
-	int crystal;
-	void (*max3100_hw_suspend) (int suspend);
-	int poll_time;
-};
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/serial_mfd.h b/ANDROID_3.4.5/include/linux/serial_mfd.h
deleted file mode 100644
index 2b071e0b..00000000
--- a/ANDROID_3.4.5/include/linux/serial_mfd.h
+++ /dev/null
@@ -1,47 +0,0 @@
-#ifndef _SERIAL_MFD_H_
-#define _SERIAL_MFD_H_
-
-/* HW register offset definition */
-#define UART_FOR	0x08
-#define UART_PS		0x0C
-#define UART_MUL	0x0D
-#define UART_DIV	0x0E
-
-#define HSU_GBL_IEN	0x0
-#define HSU_GBL_IST	0x4
-
-#define HSU_GBL_INT_BIT_PORT0	0x0
-#define HSU_GBL_INT_BIT_PORT1	0x1
-#define HSU_GBL_INT_BIT_PORT2	0x2
-#define HSU_GBL_INT_BIT_IRI	0x3
-#define HSU_GBL_INT_BIT_HDLC	0x4
-#define HSU_GBL_INT_BIT_DMA	0x5
-
-#define HSU_GBL_ISR	0x8
-#define HSU_GBL_DMASR	0x400
-#define HSU_GBL_DMAISR	0x404
-
-#define HSU_PORT_REG_OFFSET	0x80
-#define HSU_PORT0_REG_OFFSET	0x80
-#define HSU_PORT1_REG_OFFSET	0x100
-#define HSU_PORT2_REG_OFFSET	0x180
-#define HSU_PORT_REG_LENGTH	0x80
-
-#define HSU_DMA_CHANS_REG_OFFSET	0x500
-#define HSU_DMA_CHANS_REG_LENGTH	0x40
-
-#define HSU_CH_SR		0x0	/* channel status reg */
-#define HSU_CH_CR		0x4	/* control reg */
-#define HSU_CH_DCR		0x8	/* descriptor control reg */
-#define HSU_CH_BSR		0x10	/* max fifo buffer size reg */
-#define HSU_CH_MOTSR		0x14	/* minimum ocp transfer size */
-#define HSU_CH_D0SAR		0x20	/* desc 0 start addr */
-#define HSU_CH_D0TSR		0x24	/* desc 0 transfer size */
-#define HSU_CH_D1SAR		0x28
-#define HSU_CH_D1TSR		0x2C
-#define HSU_CH_D2SAR		0x30
-#define HSU_CH_D2TSR		0x34
-#define HSU_CH_D3SAR		0x38
-#define HSU_CH_D3TSR		0x3C
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/serial_pnx8xxx.h b/ANDROID_3.4.5/include/linux/serial_pnx8xxx.h
deleted file mode 100644
index 79ad87b0..00000000
--- a/ANDROID_3.4.5/include/linux/serial_pnx8xxx.h
+++ /dev/null
@@ -1,80 +0,0 @@
-/*
- * Embedded Alley Solutions, source@embeddedalley.com.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef _LINUX_SERIAL_PNX8XXX_H
-#define _LINUX_SERIAL_PNX8XXX_H
-
-#include <linux/serial_core.h>
-
-#define PNX8XXX_NR_PORTS	2
-
-struct pnx8xxx_port {
-	struct uart_port	port;
-	struct timer_list	timer;
-	unsigned int		old_status;
-};
-
-/* register offsets */
-#define PNX8XXX_LCR		0
-#define PNX8XXX_MCR		0x004
-#define PNX8XXX_BAUD		0x008
-#define PNX8XXX_CFG		0x00c
-#define PNX8XXX_FIFO		0x028
-#define PNX8XXX_ISTAT		0xfe0
-#define PNX8XXX_IEN		0xfe4
-#define PNX8XXX_ICLR		0xfe8
-#define PNX8XXX_ISET		0xfec
-#define PNX8XXX_PD		0xff4
-#define PNX8XXX_MID		0xffc
-
-#define PNX8XXX_UART_LCR_TXBREAK	(1<<30)
-#define PNX8XXX_UART_LCR_PAREVN		0x10000000
-#define PNX8XXX_UART_LCR_PAREN		0x08000000
-#define PNX8XXX_UART_LCR_2STOPB		0x04000000
-#define PNX8XXX_UART_LCR_8BIT		0x01000000
-#define PNX8XXX_UART_LCR_TX_RST		0x00040000
-#define PNX8XXX_UART_LCR_RX_RST		0x00020000
-#define PNX8XXX_UART_LCR_RX_NEXT	0x00010000
-
-#define PNX8XXX_UART_MCR_SCR		0xFF000000
-#define PNX8XXX_UART_MCR_DCD		0x00800000
-#define PNX8XXX_UART_MCR_CTS		0x00100000
-#define PNX8XXX_UART_MCR_LOOP		0x00000010
-#define PNX8XXX_UART_MCR_RTS		0x00000002
-#define PNX8XXX_UART_MCR_DTR		0x00000001
-
-#define PNX8XXX_UART_INT_TX		0x00000080
-#define PNX8XXX_UART_INT_EMPTY		0x00000040
-#define PNX8XXX_UART_INT_RCVTO		0x00000020
-#define PNX8XXX_UART_INT_RX		0x00000010
-#define PNX8XXX_UART_INT_RXOVRN		0x00000008
-#define PNX8XXX_UART_INT_FRERR		0x00000004
-#define PNX8XXX_UART_INT_BREAK		0x00000002
-#define PNX8XXX_UART_INT_PARITY		0x00000001
-#define PNX8XXX_UART_INT_ALLRX		0x0000003F
-#define PNX8XXX_UART_INT_ALLTX		0x000000C0
-
-#define PNX8XXX_UART_FIFO_TXFIFO	0x001F0000
-#define PNX8XXX_UART_FIFO_TXFIFO_STA	(0x1f<<16)
-#define PNX8XXX_UART_FIFO_RXBRK		0x00008000
-#define PNX8XXX_UART_FIFO_RXFE		0x00004000
-#define PNX8XXX_UART_FIFO_RXPAR		0x00002000
-#define PNX8XXX_UART_FIFO_RXFIFO	0x00001F00
-#define PNX8XXX_UART_FIFO_RBRTHR	0x000000FF
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/serial_reg.h b/ANDROID_3.4.5/include/linux/serial_reg.h
deleted file mode 100644
index 8ce70d76..00000000
--- a/ANDROID_3.4.5/include/linux/serial_reg.h
+++ /dev/null
@@ -1,367 +0,0 @@
-/*
- * include/linux/serial_reg.h
- *
- * Copyright (C) 1992, 1994 by Theodore Ts'o.
- * 
- * Redistribution of this file is permitted under the terms of the GNU 
- * Public License (GPL)
- * 
- * These are the UART port assignments, expressed as offsets from the base
- * register.  These assignments should hold for any serial port based on
- * a 8250, 16450, or 16550(A).
- */
-
-#ifndef _LINUX_SERIAL_REG_H
-#define _LINUX_SERIAL_REG_H
-
-/*
- * DLAB=0
- */
-#define UART_RX		0	/* In:  Receive buffer */
-#define UART_TX		0	/* Out: Transmit buffer */
-
-#define UART_IER	1	/* Out: Interrupt Enable Register */
-#define UART_IER_MSI		0x08 /* Enable Modem status interrupt */
-#define UART_IER_RLSI		0x04 /* Enable receiver line status interrupt */
-#define UART_IER_THRI		0x02 /* Enable Transmitter holding register int. */
-#define UART_IER_RDI		0x01 /* Enable receiver data interrupt */
-/*
- * Sleep mode for ST16650 and TI16750.  For the ST16650, EFR[4]=1
- */
-#define UART_IERX_SLEEP		0x10 /* Enable sleep mode */
-
-#define UART_IIR	2	/* In:  Interrupt ID Register */
-#define UART_IIR_NO_INT		0x01 /* No interrupts pending */
-#define UART_IIR_ID		0x06 /* Mask for the interrupt ID */
-#define UART_IIR_MSI		0x00 /* Modem status interrupt */
-#define UART_IIR_THRI		0x02 /* Transmitter holding register empty */
-#define UART_IIR_RDI		0x04 /* Receiver data interrupt */
-#define UART_IIR_RLSI		0x06 /* Receiver line status interrupt */
-
-#define UART_IIR_BUSY		0x07 /* DesignWare APB Busy Detect */
-
-#define UART_FCR	2	/* Out: FIFO Control Register */
-#define UART_FCR_ENABLE_FIFO	0x01 /* Enable the FIFO */
-#define UART_FCR_CLEAR_RCVR	0x02 /* Clear the RCVR FIFO */
-#define UART_FCR_CLEAR_XMIT	0x04 /* Clear the XMIT FIFO */
-#define UART_FCR_DMA_SELECT	0x08 /* For DMA applications */
-/*
- * Note: The FIFO trigger levels are chip specific:
- *	RX:76 = 00  01  10  11	TX:54 = 00  01  10  11
- * PC16550D:	 1   4   8  14		xx  xx  xx  xx
- * TI16C550A:	 1   4   8  14          xx  xx  xx  xx
- * TI16C550C:	 1   4   8  14          xx  xx  xx  xx
- * ST16C550:	 1   4   8  14		xx  xx  xx  xx
- * ST16C650:	 8  16  24  28		16   8  24  30	PORT_16650V2
- * NS16C552:	 1   4   8  14		xx  xx  xx  xx
- * ST16C654:	 8  16  56  60		 8  16  32  56	PORT_16654
- * TI16C750:	 1  16  32  56		xx  xx  xx  xx	PORT_16750
- * TI16C752:	 8  16  56  60		 8  16  32  56
- * Tegra:	 1   4   8  14		16   8   4   1	PORT_TEGRA
- */
-#define UART_FCR_R_TRIG_00	0x00
-#define UART_FCR_R_TRIG_01	0x40
-#define UART_FCR_R_TRIG_10	0x80
-#define UART_FCR_R_TRIG_11	0xc0
-#define UART_FCR_T_TRIG_00	0x00
-#define UART_FCR_T_TRIG_01	0x10
-#define UART_FCR_T_TRIG_10	0x20
-#define UART_FCR_T_TRIG_11	0x30
-
-#define UART_FCR_TRIGGER_MASK	0xC0 /* Mask for the FIFO trigger range */
-#define UART_FCR_TRIGGER_1	0x00 /* Mask for trigger set at 1 */
-#define UART_FCR_TRIGGER_4	0x40 /* Mask for trigger set at 4 */
-#define UART_FCR_TRIGGER_8	0x80 /* Mask for trigger set at 8 */
-#define UART_FCR_TRIGGER_14	0xC0 /* Mask for trigger set at 14 */
-/* 16650 definitions */
-#define UART_FCR6_R_TRIGGER_8	0x00 /* Mask for receive trigger set at 1 */
-#define UART_FCR6_R_TRIGGER_16	0x40 /* Mask for receive trigger set at 4 */
-#define UART_FCR6_R_TRIGGER_24  0x80 /* Mask for receive trigger set at 8 */
-#define UART_FCR6_R_TRIGGER_28	0xC0 /* Mask for receive trigger set at 14 */
-#define UART_FCR6_T_TRIGGER_16	0x00 /* Mask for transmit trigger set at 16 */
-#define UART_FCR6_T_TRIGGER_8	0x10 /* Mask for transmit trigger set at 8 */
-#define UART_FCR6_T_TRIGGER_24  0x20 /* Mask for transmit trigger set at 24 */
-#define UART_FCR6_T_TRIGGER_30	0x30 /* Mask for transmit trigger set at 30 */
-#define UART_FCR7_64BYTE	0x20 /* Go into 64 byte mode (TI16C750) */
-
-#define UART_LCR	3	/* Out: Line Control Register */
-/*
- * Note: if the word length is 5 bits (UART_LCR_WLEN5), then setting 
- * UART_LCR_STOP will select 1.5 stop bits, not 2 stop bits.
- */
-#define UART_LCR_DLAB		0x80 /* Divisor latch access bit */
-#define UART_LCR_SBC		0x40 /* Set break control */
-#define UART_LCR_SPAR		0x20 /* Stick parity (?) */
-#define UART_LCR_EPAR		0x10 /* Even parity select */
-#define UART_LCR_PARITY		0x08 /* Parity Enable */
-#define UART_LCR_STOP		0x04 /* Stop bits: 0=1 bit, 1=2 bits */
-#define UART_LCR_WLEN5		0x00 /* Wordlength: 5 bits */
-#define UART_LCR_WLEN6		0x01 /* Wordlength: 6 bits */
-#define UART_LCR_WLEN7		0x02 /* Wordlength: 7 bits */
-#define UART_LCR_WLEN8		0x03 /* Wordlength: 8 bits */
-
-/*
- * Access to some registers depends on register access / configuration
- * mode.
- */
-#define UART_LCR_CONF_MODE_A	UART_LCR_DLAB	/* Configutation mode A */
-#define UART_LCR_CONF_MODE_B	0xBF		/* Configutation mode B */
-
-#define UART_MCR	4	/* Out: Modem Control Register */
-#define UART_MCR_CLKSEL		0x80 /* Divide clock by 4 (TI16C752, EFR[4]=1) */
-#define UART_MCR_TCRTLR		0x40 /* Access TCR/TLR (TI16C752, EFR[4]=1) */
-#define UART_MCR_XONANY		0x20 /* Enable Xon Any (TI16C752, EFR[4]=1) */
-#define UART_MCR_AFE		0x20 /* Enable auto-RTS/CTS (TI16C550C/TI16C750) */
-#define UART_MCR_LOOP		0x10 /* Enable loopback test mode */
-#define UART_MCR_OUT2		0x08 /* Out2 complement */
-#define UART_MCR_OUT1		0x04 /* Out1 complement */
-#define UART_MCR_RTS		0x02 /* RTS complement */
-#define UART_MCR_DTR		0x01 /* DTR complement */
-
-#define UART_LSR	5	/* In:  Line Status Register */
-#define UART_LSR_FIFOE		0x80 /* Fifo error */
-#define UART_LSR_TEMT		0x40 /* Transmitter empty */
-#define UART_LSR_THRE		0x20 /* Transmit-hold-register empty */
-#define UART_LSR_BI		0x10 /* Break interrupt indicator */
-#define UART_LSR_FE		0x08 /* Frame error indicator */
-#define UART_LSR_PE		0x04 /* Parity error indicator */
-#define UART_LSR_OE		0x02 /* Overrun error indicator */
-#define UART_LSR_DR		0x01 /* Receiver data ready */
-#define UART_LSR_BRK_ERROR_BITS	0x1E /* BI, FE, PE, OE bits */
-
-#define UART_MSR	6	/* In:  Modem Status Register */
-#define UART_MSR_DCD		0x80 /* Data Carrier Detect */
-#define UART_MSR_RI		0x40 /* Ring Indicator */
-#define UART_MSR_DSR		0x20 /* Data Set Ready */
-#define UART_MSR_CTS		0x10 /* Clear to Send */
-#define UART_MSR_DDCD		0x08 /* Delta DCD */
-#define UART_MSR_TERI		0x04 /* Trailing edge ring indicator */
-#define UART_MSR_DDSR		0x02 /* Delta DSR */
-#define UART_MSR_DCTS		0x01 /* Delta CTS */
-#define UART_MSR_ANY_DELTA	0x0F /* Any of the delta bits! */
-
-#define UART_SCR	7	/* I/O: Scratch Register */
-
-/*
- * DLAB=1
- */
-#define UART_DLL	0	/* Out: Divisor Latch Low */
-#define UART_DLM	1	/* Out: Divisor Latch High */
-
-/*
- * LCR=0xBF (or DLAB=1 for 16C660)
- */
-#define UART_EFR	2	/* I/O: Extended Features Register */
-#define UART_XR_EFR	9	/* I/O: Extended Features Register (XR17D15x) */
-#define UART_EFR_CTS		0x80 /* CTS flow control */
-#define UART_EFR_RTS		0x40 /* RTS flow control */
-#define UART_EFR_SCD		0x20 /* Special character detect */
-#define UART_EFR_ECB		0x10 /* Enhanced control bit */
-/*
- * the low four bits control software flow control
- */
-
-/*
- * LCR=0xBF, TI16C752, ST16650, ST16650A, ST16654
- */
-#define UART_XON1	4	/* I/O: Xon character 1 */
-#define UART_XON2	5	/* I/O: Xon character 2 */
-#define UART_XOFF1	6	/* I/O: Xoff character 1 */
-#define UART_XOFF2	7	/* I/O: Xoff character 2 */
-
-/*
- * EFR[4]=1 MCR[6]=1, TI16C752
- */
-#define UART_TI752_TCR	6	/* I/O: transmission control register */
-#define UART_TI752_TLR	7	/* I/O: trigger level register */
-
-/*
- * LCR=0xBF, XR16C85x
- */
-#define UART_TRG	0	/* FCTR bit 7 selects Rx or Tx
-				 * In: Fifo count
-				 * Out: Fifo custom trigger levels */
-/*
- * These are the definitions for the Programmable Trigger Register
- */
-#define UART_TRG_1		0x01
-#define UART_TRG_4		0x04
-#define UART_TRG_8		0x08
-#define UART_TRG_16		0x10
-#define UART_TRG_32		0x20
-#define UART_TRG_64		0x40
-#define UART_TRG_96		0x60
-#define UART_TRG_120		0x78
-#define UART_TRG_128		0x80
-
-#define UART_FCTR	1	/* Feature Control Register */
-#define UART_FCTR_RTS_NODELAY	0x00  /* RTS flow control delay */
-#define UART_FCTR_RTS_4DELAY	0x01
-#define UART_FCTR_RTS_6DELAY	0x02
-#define UART_FCTR_RTS_8DELAY	0x03
-#define UART_FCTR_IRDA		0x04  /* IrDa data encode select */
-#define UART_FCTR_TX_INT	0x08  /* Tx interrupt type select */
-#define UART_FCTR_TRGA		0x00  /* Tx/Rx 550 trigger table select */
-#define UART_FCTR_TRGB		0x10  /* Tx/Rx 650 trigger table select */
-#define UART_FCTR_TRGC		0x20  /* Tx/Rx 654 trigger table select */
-#define UART_FCTR_TRGD		0x30  /* Tx/Rx 850 programmable trigger select */
-#define UART_FCTR_SCR_SWAP	0x40  /* Scratch pad register swap */
-#define UART_FCTR_RX		0x00  /* Programmable trigger mode select */
-#define UART_FCTR_TX		0x80  /* Programmable trigger mode select */
-
-/*
- * LCR=0xBF, FCTR[6]=1
- */
-#define UART_EMSR	7	/* Extended Mode Select Register */
-#define UART_EMSR_FIFO_COUNT	0x01  /* Rx/Tx select */
-#define UART_EMSR_ALT_COUNT	0x02  /* Alternating count select */
-
-/*
- * The Intel XScale on-chip UARTs define these bits
- */
-#define UART_IER_DMAE	0x80	/* DMA Requests Enable */
-#define UART_IER_UUE	0x40	/* UART Unit Enable */
-#define UART_IER_NRZE	0x20	/* NRZ coding Enable */
-#define UART_IER_RTOIE	0x10	/* Receiver Time Out Interrupt Enable */
-
-#define UART_IIR_TOD	0x08	/* Character Timeout Indication Detected */
-
-#define UART_FCR_PXAR1	0x00	/* receive FIFO threshold = 1 */
-#define UART_FCR_PXAR8	0x40	/* receive FIFO threshold = 8 */
-#define UART_FCR_PXAR16	0x80	/* receive FIFO threshold = 16 */
-#define UART_FCR_PXAR32	0xc0	/* receive FIFO threshold = 32 */
-
-/*
- * Intel MID on-chip HSU (High Speed UART) defined bits
- */
-#define UART_FCR_HSU_64_1B	0x00	/* receive FIFO treshold = 1 */
-#define UART_FCR_HSU_64_16B	0x40	/* receive FIFO treshold = 16 */
-#define UART_FCR_HSU_64_32B	0x80	/* receive FIFO treshold = 32 */
-#define UART_FCR_HSU_64_56B	0xc0	/* receive FIFO treshold = 56 */
-
-#define UART_FCR_HSU_16_1B	0x00	/* receive FIFO treshold = 1 */
-#define UART_FCR_HSU_16_4B	0x40	/* receive FIFO treshold = 4 */
-#define UART_FCR_HSU_16_8B	0x80	/* receive FIFO treshold = 8 */
-#define UART_FCR_HSU_16_14B	0xc0	/* receive FIFO treshold = 14 */
-
-#define UART_FCR_HSU_64B_FIFO	0x20	/* chose 64 bytes FIFO */
-#define UART_FCR_HSU_16B_FIFO	0x00	/* chose 16 bytes FIFO */
-
-#define UART_FCR_HALF_EMPT_TXI	0x00	/* trigger TX_EMPT IRQ for half empty */
-#define UART_FCR_FULL_EMPT_TXI	0x08	/* trigger TX_EMPT IRQ for full empty */
-
-/*
- * These register definitions are for the 16C950
- */
-#define UART_ASR	0x01	/* Additional Status Register */
-#define UART_RFL	0x03	/* Receiver FIFO level */
-#define UART_TFL 	0x04	/* Transmitter FIFO level */
-#define UART_ICR	0x05	/* Index Control Register */
-
-/* The 16950 ICR registers */
-#define UART_ACR	0x00	/* Additional Control Register */
-#define UART_CPR	0x01	/* Clock Prescalar Register */
-#define UART_TCR	0x02	/* Times Clock Register */
-#define UART_CKS	0x03	/* Clock Select Register */
-#define UART_TTL	0x04	/* Transmitter Interrupt Trigger Level */
-#define UART_RTL	0x05	/* Receiver Interrupt Trigger Level */
-#define UART_FCL	0x06	/* Flow Control Level Lower */
-#define UART_FCH	0x07	/* Flow Control Level Higher */
-#define UART_ID1	0x08	/* ID #1 */
-#define UART_ID2	0x09	/* ID #2 */
-#define UART_ID3	0x0A	/* ID #3 */
-#define UART_REV	0x0B	/* Revision */
-#define UART_CSR	0x0C	/* Channel Software Reset */
-#define UART_NMR	0x0D	/* Nine-bit Mode Register */
-#define UART_CTR	0xFF
-
-/*
- * The 16C950 Additional Control Register
- */
-#define UART_ACR_RXDIS	0x01	/* Receiver disable */
-#define UART_ACR_TXDIS	0x02	/* Transmitter disable */
-#define UART_ACR_DSRFC	0x04	/* DSR Flow Control */
-#define UART_ACR_TLENB	0x20	/* 950 trigger levels enable */
-#define UART_ACR_ICRRD	0x40	/* ICR Read enable */
-#define UART_ACR_ASREN	0x80	/* Additional status enable */
-
-
-
-/*
- * These definitions are for the RSA-DV II/S card, from
- *
- * Kiyokazu SUTO <suto@ks-and-ks.ne.jp>
- */
-
-#define UART_RSA_BASE (-8)
-
-#define UART_RSA_MSR ((UART_RSA_BASE) + 0) /* I/O: Mode Select Register */
-
-#define UART_RSA_MSR_SWAP (1 << 0) /* Swap low/high 8 bytes in I/O port addr */
-#define UART_RSA_MSR_FIFO (1 << 2) /* Enable the external FIFO */
-#define UART_RSA_MSR_FLOW (1 << 3) /* Enable the auto RTS/CTS flow control */
-#define UART_RSA_MSR_ITYP (1 << 4) /* Level (1) / Edge triger (0) */
-
-#define UART_RSA_IER ((UART_RSA_BASE) + 1) /* I/O: Interrupt Enable Register */
-
-#define UART_RSA_IER_Rx_FIFO_H (1 << 0) /* Enable Rx FIFO half full int. */
-#define UART_RSA_IER_Tx_FIFO_H (1 << 1) /* Enable Tx FIFO half full int. */
-#define UART_RSA_IER_Tx_FIFO_E (1 << 2) /* Enable Tx FIFO empty int. */
-#define UART_RSA_IER_Rx_TOUT (1 << 3) /* Enable char receive timeout int */
-#define UART_RSA_IER_TIMER (1 << 4) /* Enable timer interrupt */
-
-#define UART_RSA_SRR ((UART_RSA_BASE) + 2) /* IN: Status Read Register */
-
-#define UART_RSA_SRR_Tx_FIFO_NEMP (1 << 0) /* Tx FIFO is not empty (1) */
-#define UART_RSA_SRR_Tx_FIFO_NHFL (1 << 1) /* Tx FIFO is not half full (1) */
-#define UART_RSA_SRR_Tx_FIFO_NFUL (1 << 2) /* Tx FIFO is not full (1) */
-#define UART_RSA_SRR_Rx_FIFO_NEMP (1 << 3) /* Rx FIFO is not empty (1) */
-#define UART_RSA_SRR_Rx_FIFO_NHFL (1 << 4) /* Rx FIFO is not half full (1) */
-#define UART_RSA_SRR_Rx_FIFO_NFUL (1 << 5) /* Rx FIFO is not full (1) */
-#define UART_RSA_SRR_Rx_TOUT (1 << 6) /* Character reception timeout occurred (1) */
-#define UART_RSA_SRR_TIMER (1 << 7) /* Timer interrupt occurred */
-
-#define UART_RSA_FRR ((UART_RSA_BASE) + 2) /* OUT: FIFO Reset Register */
-
-#define UART_RSA_TIVSR ((UART_RSA_BASE) + 3) /* I/O: Timer Interval Value Set Register */
-
-#define UART_RSA_TCR ((UART_RSA_BASE) + 4) /* OUT: Timer Control Register */
-
-#define UART_RSA_TCR_SWITCH (1 << 0) /* Timer on */
-
-/*
- * The RSA DSV/II board has two fixed clock frequencies.  One is the
- * standard rate, and the other is 8 times faster.
- */
-#define SERIAL_RSA_BAUD_BASE (921600)
-#define SERIAL_RSA_BAUD_BASE_LO (SERIAL_RSA_BAUD_BASE / 8)
-
-/*
- * Extra serial register definitions for the internal UARTs
- * in TI OMAP processors.
- */
-#define UART_OMAP_MDR1		0x08	/* Mode definition register */
-#define UART_OMAP_MDR2		0x09	/* Mode definition register 2 */
-#define UART_OMAP_SCR		0x10	/* Supplementary control register */
-#define UART_OMAP_SSR		0x11	/* Supplementary status register */
-#define UART_OMAP_EBLR		0x12	/* BOF length register */
-#define UART_OMAP_OSC_12M_SEL	0x13	/* OMAP1510 12MHz osc select */
-#define UART_OMAP_MVER		0x14	/* Module version register */
-#define UART_OMAP_SYSC		0x15	/* System configuration register */
-#define UART_OMAP_SYSS		0x16	/* System status register */
-#define UART_OMAP_WER		0x17	/* Wake-up enable register */
-
-/*
- * These are the definitions for the MDR1 register
- */
-#define UART_OMAP_MDR1_16X_MODE		0x00	/* UART 16x mode */
-#define UART_OMAP_MDR1_SIR_MODE		0x01	/* SIR mode */
-#define UART_OMAP_MDR1_16X_ABAUD_MODE	0x02	/* UART 16x auto-baud */
-#define UART_OMAP_MDR1_13X_MODE		0x03	/* UART 13x mode */
-#define UART_OMAP_MDR1_MIR_MODE		0x04	/* MIR mode */
-#define UART_OMAP_MDR1_FIR_MODE		0x05	/* FIR mode */
-#define UART_OMAP_MDR1_CIR_MODE		0x06	/* CIR mode */
-#define UART_OMAP_MDR1_DISABLE		0x07	/* Disable (default state) */
-
-#endif /* _LINUX_SERIAL_REG_H */
-
diff --git a/ANDROID_3.4.5/include/linux/serial_sci.h b/ANDROID_3.4.5/include/linux/serial_sci.h
deleted file mode 100644
index 78779074..00000000
--- a/ANDROID_3.4.5/include/linux/serial_sci.h
+++ /dev/null
@@ -1,161 +0,0 @@
-#ifndef __LINUX_SERIAL_SCI_H
-#define __LINUX_SERIAL_SCI_H
-
-#include <linux/serial_core.h>
-#include <linux/sh_dma.h>
-
-/*
- * Generic header for SuperH SCI(F) (used by sh/sh64/h8300 and related parts)
- */
-
-#define SCIx_NOT_SUPPORTED	(-1)
-
-enum {
-	SCBRR_ALGO_1,		/* ((clk + 16 * bps) / (16 * bps) - 1) */
-	SCBRR_ALGO_2,		/* ((clk + 16 * bps) / (32 * bps) - 1) */
-	SCBRR_ALGO_3,		/* (((clk * 2) + 16 * bps) / (16 * bps) - 1) */
-	SCBRR_ALGO_4,		/* (((clk * 2) + 16 * bps) / (32 * bps) - 1) */
-	SCBRR_ALGO_5,		/* (((clk * 1000 / 32) / bps) - 1) */
-};
-
-#define SCSCR_TIE	(1 << 7)
-#define SCSCR_RIE	(1 << 6)
-#define SCSCR_TE	(1 << 5)
-#define SCSCR_RE	(1 << 4)
-#define SCSCR_REIE	(1 << 3)	/* not supported by all parts */
-#define SCSCR_TOIE	(1 << 2)	/* not supported by all parts */
-#define SCSCR_CKE1	(1 << 1)
-#define SCSCR_CKE0	(1 << 0)
-
-/* SCxSR SCI */
-#define SCI_TDRE  0x80
-#define SCI_RDRF  0x40
-#define SCI_ORER  0x20
-#define SCI_FER   0x10
-#define SCI_PER   0x08
-#define SCI_TEND  0x04
-
-#define SCI_DEFAULT_ERROR_MASK (SCI_PER | SCI_FER)
-
-/* SCxSR SCIF */
-#define SCIF_ER    0x0080
-#define SCIF_TEND  0x0040
-#define SCIF_TDFE  0x0020
-#define SCIF_BRK   0x0010
-#define SCIF_FER   0x0008
-#define SCIF_PER   0x0004
-#define SCIF_RDF   0x0002
-#define SCIF_DR    0x0001
-
-#define SCIF_DEFAULT_ERROR_MASK (SCIF_PER | SCIF_FER | SCIF_ER | SCIF_BRK)
-
-/* SCSPTR, optional */
-#define SCSPTR_RTSIO	(1 << 7)
-#define SCSPTR_CTSIO	(1 << 5)
-
-/* Offsets into the sci_port->irqs array */
-enum {
-	SCIx_ERI_IRQ,
-	SCIx_RXI_IRQ,
-	SCIx_TXI_IRQ,
-	SCIx_BRI_IRQ,
-	SCIx_NR_IRQS,
-
-	SCIx_MUX_IRQ = SCIx_NR_IRQS,	/* special case */
-};
-
-/* Offsets into the sci_port->gpios array */
-enum {
-	SCIx_SCK,
-	SCIx_RXD,
-	SCIx_TXD,
-	SCIx_CTS,
-	SCIx_RTS,
-
-	SCIx_NR_FNS,
-};
-
-enum {
-	SCIx_PROBE_REGTYPE,
-
-	SCIx_SCI_REGTYPE,
-	SCIx_IRDA_REGTYPE,
-	SCIx_SCIFA_REGTYPE,
-	SCIx_SCIFB_REGTYPE,
-	SCIx_SH2_SCIF_FIFODATA_REGTYPE,
-	SCIx_SH3_SCIF_REGTYPE,
-	SCIx_SH4_SCIF_REGTYPE,
-	SCIx_SH4_SCIF_NO_SCSPTR_REGTYPE,
-	SCIx_SH4_SCIF_FIFODATA_REGTYPE,
-	SCIx_SH7705_SCIF_REGTYPE,
-
-	SCIx_NR_REGTYPES,
-};
-
-#define SCIx_IRQ_MUXED(irq)		\
-{					\
-	[SCIx_ERI_IRQ]	= (irq),	\
-	[SCIx_RXI_IRQ]	= (irq),	\
-	[SCIx_TXI_IRQ]	= (irq),	\
-	[SCIx_BRI_IRQ]	= (irq),	\
-}
-
-#define SCIx_IRQ_IS_MUXED(port)			\
-	((port)->cfg->irqs[SCIx_ERI_IRQ] ==	\
-	 (port)->cfg->irqs[SCIx_RXI_IRQ]) ||	\
-	((port)->cfg->irqs[SCIx_ERI_IRQ] &&	\
-	 !(port)->cfg->irqs[SCIx_RXI_IRQ])
-/*
- * SCI register subset common for all port types.
- * Not all registers will exist on all parts.
- */
-enum {
-	SCSMR, SCBRR, SCSCR, SCxSR,
-	SCFCR, SCFDR, SCxTDR, SCxRDR,
-	SCLSR, SCTFDR, SCRFDR, SCSPTR,
-
-	SCIx_NR_REGS,
-};
-
-struct device;
-
-struct plat_sci_port_ops {
-	void (*init_pins)(struct uart_port *, unsigned int cflag);
-};
-
-/*
- * Port-specific capabilities
- */
-#define SCIx_HAVE_RTSCTS	(1 << 0)
-
-/*
- * Platform device specific platform_data struct
- */
-struct plat_sci_port {
-	unsigned long	mapbase;		/* resource base */
-	unsigned int	irqs[SCIx_NR_IRQS];	/* ERI, RXI, TXI, BRI */
-	unsigned int	gpios[SCIx_NR_FNS];	/* SCK, RXD, TXD, CTS, RTS */
-	unsigned int	type;			/* SCI / SCIF / IRDA */
-	upf_t		flags;			/* UPF_* flags */
-	unsigned long	capabilities;		/* Port features/capabilities */
-
-	unsigned int	scbrr_algo_id;		/* SCBRR calculation algo */
-	unsigned int	scscr;			/* SCSCR initialization */
-
-	/*
-	 * Platform overrides if necessary, defaults otherwise.
-	 */
-	int		overrun_bit;
-	unsigned int	error_mask;
-
-	int		port_reg;
-	unsigned char	regshift;
-	unsigned char	regtype;
-
-	struct plat_sci_port_ops	*ops;
-
-	unsigned int	dma_slave_tx;
-	unsigned int	dma_slave_rx;
-};
-
-#endif /* __LINUX_SERIAL_SCI_H */
diff --git a/ANDROID_3.4.5/include/linux/serio.h b/ANDROID_3.4.5/include/linux/serio.h
deleted file mode 100644
index ca82861b..00000000
--- a/ANDROID_3.4.5/include/linux/serio.h
+++ /dev/null
@@ -1,206 +0,0 @@
-#ifndef _SERIO_H
-#define _SERIO_H
-
-/*
- * Copyright (C) 1999-2002 Vojtech Pavlik
-*
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-
-#include <linux/ioctl.h>
-
-#define SPIOCSTYPE	_IOW('q', 0x01, unsigned long)
-
-#ifdef __KERNEL__
-
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/spinlock.h>
-#include <linux/mutex.h>
-#include <linux/device.h>
-#include <linux/mod_devicetable.h>
-
-struct serio {
-	void *port_data;
-
-	char name[32];
-	char phys[32];
-
-	bool manual_bind;
-
-	struct serio_device_id id;
-
-	spinlock_t lock;		/* protects critical sections from port's interrupt handler */
-
-	int (*write)(struct serio *, unsigned char);
-	int (*open)(struct serio *);
-	void (*close)(struct serio *);
-	int (*start)(struct serio *);
-	void (*stop)(struct serio *);
-
-	struct serio *parent;
-	struct list_head child_node;	/* Entry in parent->children list */
-	struct list_head children;
-	unsigned int depth;		/* level of nesting in serio hierarchy */
-
-	struct serio_driver *drv;	/* accessed from interrupt, must be protected by serio->lock and serio->sem */
-	struct mutex drv_mutex;		/* protects serio->drv so attributes can pin driver */
-
-	struct device dev;
-
-	struct list_head node;
-};
-#define to_serio_port(d)	container_of(d, struct serio, dev)
-
-struct serio_driver {
-	const char *description;
-
-	const struct serio_device_id *id_table;
-	bool manual_bind;
-
-	void (*write_wakeup)(struct serio *);
-	irqreturn_t (*interrupt)(struct serio *, unsigned char, unsigned int);
-	int  (*connect)(struct serio *, struct serio_driver *drv);
-	int  (*reconnect)(struct serio *);
-	void (*disconnect)(struct serio *);
-	void (*cleanup)(struct serio *);
-
-	struct device_driver driver;
-};
-#define to_serio_driver(d)	container_of(d, struct serio_driver, driver)
-
-int serio_open(struct serio *serio, struct serio_driver *drv);
-void serio_close(struct serio *serio);
-void serio_rescan(struct serio *serio);
-void serio_reconnect(struct serio *serio);
-irqreturn_t serio_interrupt(struct serio *serio, unsigned char data, unsigned int flags);
-
-void __serio_register_port(struct serio *serio, struct module *owner);
-
-/* use a define to avoid include chaining to get THIS_MODULE */
-#define serio_register_port(serio) \
-	__serio_register_port(serio, THIS_MODULE)
-
-void serio_unregister_port(struct serio *serio);
-void serio_unregister_child_port(struct serio *serio);
-
-int __must_check __serio_register_driver(struct serio_driver *drv,
-				struct module *owner, const char *mod_name);
-
-/* use a define to avoid include chaining to get THIS_MODULE & friends */
-#define serio_register_driver(drv) \
-	__serio_register_driver(drv, THIS_MODULE, KBUILD_MODNAME)
-
-void serio_unregister_driver(struct serio_driver *drv);
-
-static inline int serio_write(struct serio *serio, unsigned char data)
-{
-	if (serio->write)
-		return serio->write(serio, data);
-	else
-		return -1;
-}
-
-static inline void serio_drv_write_wakeup(struct serio *serio)
-{
-	if (serio->drv && serio->drv->write_wakeup)
-		serio->drv->write_wakeup(serio);
-}
-
-/*
- * Use the following functions to manipulate serio's per-port
- * driver-specific data.
- */
-static inline void *serio_get_drvdata(struct serio *serio)
-{
-	return dev_get_drvdata(&serio->dev);
-}
-
-static inline void serio_set_drvdata(struct serio *serio, void *data)
-{
-	dev_set_drvdata(&serio->dev, data);
-}
-
-/*
- * Use the following functions to protect critical sections in
- * driver code from port's interrupt handler
- */
-static inline void serio_pause_rx(struct serio *serio)
-{
-	spin_lock_irq(&serio->lock);
-}
-
-static inline void serio_continue_rx(struct serio *serio)
-{
-	spin_unlock_irq(&serio->lock);
-}
-
-#endif
-
-/*
- * bit masks for use in "interrupt" flags (3rd argument)
- */
-#define SERIO_TIMEOUT	1
-#define SERIO_PARITY	2
-#define SERIO_FRAME	4
-
-/*
- * Serio types
- */
-#define SERIO_XT	0x00
-#define SERIO_8042	0x01
-#define SERIO_RS232	0x02
-#define SERIO_HIL_MLC	0x03
-#define SERIO_PS_PSTHRU	0x05
-#define SERIO_8042_XL	0x06
-
-/*
- * Serio protocols
- */
-#define SERIO_UNKNOWN	0x00
-#define SERIO_MSC	0x01
-#define SERIO_SUN	0x02
-#define SERIO_MS	0x03
-#define SERIO_MP	0x04
-#define SERIO_MZ	0x05
-#define SERIO_MZP	0x06
-#define SERIO_MZPP	0x07
-#define SERIO_VSXXXAA	0x08
-#define SERIO_SUNKBD	0x10
-#define SERIO_WARRIOR	0x18
-#define SERIO_SPACEORB	0x19
-#define SERIO_MAGELLAN	0x1a
-#define SERIO_SPACEBALL	0x1b
-#define SERIO_GUNZE	0x1c
-#define SERIO_IFORCE	0x1d
-#define SERIO_STINGER	0x1e
-#define SERIO_NEWTON	0x1f
-#define SERIO_STOWAWAY	0x20
-#define SERIO_H3600	0x21
-#define SERIO_PS2SER	0x22
-#define SERIO_TWIDKBD	0x23
-#define SERIO_TWIDJOY	0x24
-#define SERIO_HIL	0x25
-#define SERIO_SNES232	0x26
-#define SERIO_SEMTECH	0x27
-#define SERIO_LKKBD	0x28
-#define SERIO_ELO	0x29
-#define SERIO_MICROTOUCH	0x30
-#define SERIO_PENMOUNT	0x31
-#define SERIO_TOUCHRIGHT	0x32
-#define SERIO_TOUCHWIN	0x33
-#define SERIO_TAOSEVM	0x34
-#define SERIO_FUJITSU	0x35
-#define SERIO_ZHENHUA	0x36
-#define SERIO_INEXIO	0x37
-#define SERIO_TOUCHIT213	0x38
-#define SERIO_W8001	0x39
-#define SERIO_DYNAPRO	0x3a
-#define SERIO_HAMPSHIRE	0x3b
-#define SERIO_PS2MULT	0x3c
-#define SERIO_TSC40	0x3d
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/sfi.h b/ANDROID_3.4.5/include/linux/sfi.h
deleted file mode 100644
index fe817918..00000000
--- a/ANDROID_3.4.5/include/linux/sfi.h
+++ /dev/null
@@ -1,206 +0,0 @@
-/* sfi.h Simple Firmware Interface */
-
-/*
-
-  This file is provided under a dual BSD/GPLv2 license.  When using or
-  redistributing this file, you may do so under either license.
-
-  GPL LICENSE SUMMARY
-
-  Copyright(c) 2009 Intel Corporation. All rights reserved.
-
-  This program is free software; you can redistribute it and/or modify
-  it under the terms of version 2 of the GNU General Public License as
-  published by the Free Software Foundation.
-
-  This program is distributed in the hope that it will be useful, but
-  WITHOUT ANY WARRANTY; without even the implied warranty of
-  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-  General Public License for more details.
-
-  You should have received a copy of the GNU General Public License
-  along with this program; if not, write to the Free Software
-  Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-  The full GNU General Public License is included in this distribution
-  in the file called LICENSE.GPL.
-
-  BSD LICENSE
-
-  Copyright(c) 2009 Intel Corporation. All rights reserved.
-
-  Redistribution and use in source and binary forms, with or without
-  modification, are permitted provided that the following conditions
-  are met:
-
-    * Redistributions of source code must retain the above copyright
-      notice, this list of conditions and the following disclaimer.
-    * Redistributions in binary form must reproduce the above copyright
-      notice, this list of conditions and the following disclaimer in
-      the documentation and/or other materials provided with the
-      distribution.
-    * Neither the name of Intel Corporation nor the names of its
-      contributors may be used to endorse or promote products derived
-      from this software without specific prior written permission.
-
-  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
-  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-*/
-
-#ifndef _LINUX_SFI_H
-#define _LINUX_SFI_H
-
-/* Table signatures reserved by the SFI specification */
-#define SFI_SIG_SYST		"SYST"
-#define SFI_SIG_FREQ		"FREQ"
-#define SFI_SIG_IDLE		"IDLE"
-#define SFI_SIG_CPUS		"CPUS"
-#define SFI_SIG_MTMR		"MTMR"
-#define SFI_SIG_MRTC		"MRTC"
-#define SFI_SIG_MMAP		"MMAP"
-#define SFI_SIG_APIC		"APIC"
-#define SFI_SIG_XSDT		"XSDT"
-#define SFI_SIG_WAKE		"WAKE"
-#define SFI_SIG_DEVS		"DEVS"
-#define SFI_SIG_GPIO		"GPIO"
-
-#define SFI_SIGNATURE_SIZE	4
-#define SFI_OEM_ID_SIZE		6
-#define SFI_OEM_TABLE_ID_SIZE	8
-
-#define SFI_NAME_LEN		16
-
-#define SFI_SYST_SEARCH_BEGIN		0x000E0000
-#define SFI_SYST_SEARCH_END		0x000FFFFF
-
-#define SFI_GET_NUM_ENTRIES(ptable, entry_type) \
-	((ptable->header.len - sizeof(struct sfi_table_header)) / \
-	(sizeof(entry_type)))
-/*
- * Table structures must be byte-packed to match the SFI specification,
- * as they are provided by the BIOS.
- */
-struct sfi_table_header {
-	char	sig[SFI_SIGNATURE_SIZE];
-	u32	len;
-	u8	rev;
-	u8	csum;
-	char	oem_id[SFI_OEM_ID_SIZE];
-	char	oem_table_id[SFI_OEM_TABLE_ID_SIZE];
-} __packed;
-
-struct sfi_table_simple {
-	struct sfi_table_header		header;
-	u64				pentry[1];
-} __packed;
-
-/* Comply with UEFI spec 2.1 */
-struct sfi_mem_entry {
-	u32	type;
-	u64	phys_start;
-	u64	virt_start;
-	u64	pages;
-	u64	attrib;
-} __packed;
-
-struct sfi_cpu_table_entry {
-	u32	apic_id;
-} __packed;
-
-struct sfi_cstate_table_entry {
-	u32	hint;		/* MWAIT hint */
-	u32	latency;	/* latency in ms */
-} __packed;
-
-struct sfi_apic_table_entry {
-	u64	phys_addr;	/* phy base addr for APIC reg */
-} __packed;
-
-struct sfi_freq_table_entry {
-	u32	freq_mhz;	/* in MHZ */
-	u32	latency;	/* transition latency in ms */
-	u32	ctrl_val;	/* value to write to PERF_CTL */
-} __packed;
-
-struct sfi_wake_table_entry {
-	u64	phys_addr;	/* pointer to where the wake vector locates */
-} __packed;
-
-struct sfi_timer_table_entry {
-	u64	phys_addr;	/* phy base addr for the timer */
-	u32	freq_hz;	/* in HZ */
-	u32	irq;
-} __packed;
-
-struct sfi_rtc_table_entry {
-	u64	phys_addr;	/* phy base addr for the RTC */
-	u32	irq;
-} __packed;
-
-struct sfi_device_table_entry {
-	u8	type;		/* bus type, I2C, SPI or ...*/
-#define SFI_DEV_TYPE_SPI	0
-#define SFI_DEV_TYPE_I2C	1
-#define SFI_DEV_TYPE_UART	2
-#define SFI_DEV_TYPE_HSI	3
-#define SFI_DEV_TYPE_IPC	4
-
-	u8	host_num;	/* attached to host 0, 1...*/
-	u16	addr;
-	u8	irq;
-	u32	max_freq;
-	char	name[SFI_NAME_LEN];
-} __packed;
-
-struct sfi_gpio_table_entry {
-	char	controller_name[SFI_NAME_LEN];
-	u16	pin_no;
-	char	pin_name[SFI_NAME_LEN];
-} __packed;
-
-typedef int (*sfi_table_handler) (struct sfi_table_header *table);
-
-#ifdef CONFIG_SFI
-extern void __init sfi_init(void);
-extern int __init sfi_platform_init(void);
-extern void __init sfi_init_late(void);
-extern int sfi_table_parse(char *signature, char *oem_id, char *oem_table_id,
-				sfi_table_handler handler);
-
-extern int sfi_disabled;
-static inline void disable_sfi(void)
-{
-	sfi_disabled = 1;
-}
-
-#else /* !CONFIG_SFI */
-
-static inline void sfi_init(void)
-{
-}
-
-static inline void sfi_init_late(void)
-{
-}
-
-#define sfi_disabled	0
-
-static inline int sfi_table_parse(char *signature, char *oem_id,
-					char *oem_table_id,
-					sfi_table_handler handler)
-{
-	return -1;
-}
-
-#endif /* !CONFIG_SFI */
-
-#endif /*_LINUX_SFI_H*/
diff --git a/ANDROID_3.4.5/include/linux/sfi_acpi.h b/ANDROID_3.4.5/include/linux/sfi_acpi.h
deleted file mode 100644
index c4a5a8cd..00000000
--- a/ANDROID_3.4.5/include/linux/sfi_acpi.h
+++ /dev/null
@@ -1,93 +0,0 @@
-/* sfi.h Simple Firmware Interface */
-
-/*
-
-  This file is provided under a dual BSD/GPLv2 license.  When using or
-  redistributing this file, you may do so under either license.
-
-  GPL LICENSE SUMMARY
-
-  Copyright(c) 2009 Intel Corporation. All rights reserved.
-
-  This program is free software; you can redistribute it and/or modify
-  it under the terms of version 2 of the GNU General Public License as
-  published by the Free Software Foundation.
-
-  This program is distributed in the hope that it will be useful, but
-  WITHOUT ANY WARRANTY; without even the implied warranty of
-  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-  General Public License for more details.
-
-  You should have received a copy of the GNU General Public License
-  along with this program; if not, write to the Free Software
-  Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-  The full GNU General Public License is included in this distribution
-  in the file called LICENSE.GPL.
-
-  BSD LICENSE
-
-  Copyright(c) 2009 Intel Corporation. All rights reserved.
-
-  Redistribution and use in source and binary forms, with or without
-  modification, are permitted provided that the following conditions
-  are met:
-
-    * Redistributions of source code must retain the above copyright
-      notice, this list of conditions and the following disclaimer.
-    * Redistributions in binary form must reproduce the above copyright
-      notice, this list of conditions and the following disclaimer in
-      the documentation and/or other materials provided with the
-      distribution.
-    * Neither the name of Intel Corporation nor the names of its
-      contributors may be used to endorse or promote products derived
-      from this software without specific prior written permission.
-
-  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
-  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-*/
-
-#ifndef _LINUX_SFI_ACPI_H
-#define _LINUX_SFI_ACPI_H
-
-#ifdef CONFIG_SFI
-#include <acpi/acpi.h>		/* struct acpi_table_header */
-
-extern int sfi_acpi_table_parse(char *signature, char *oem_id,
-				char *oem_table_id,
-				int (*handler)(struct acpi_table_header *));
-
-static inline int acpi_sfi_table_parse(char *signature,
-				int (*handler)(struct acpi_table_header *))
-{
-	if (!acpi_table_parse(signature, handler))
-		return 0;
-
-	return sfi_acpi_table_parse(signature, NULL, NULL, handler);
-}
-#else /* !CONFIG_SFI */
-
-static inline int sfi_acpi_table_parse(char *signature, char *oem_id,
-				char *oem_table_id,
-				int (*handler)(struct acpi_table_header *))
-{
-	return -1;
-}
-
-static inline int acpi_sfi_table_parse(char *signature,
-				int (*handler)(struct acpi_table_header *))
-{
-	return acpi_table_parse(signature, handler);
-}
-#endif /* !CONFIG_SFI */
-
-#endif /*_LINUX_SFI_ACPI_H*/
diff --git a/ANDROID_3.4.5/include/linux/sh_clk.h b/ANDROID_3.4.5/include/linux/sh_clk.h
deleted file mode 100644
index 0a9d8f2a..00000000
--- a/ANDROID_3.4.5/include/linux/sh_clk.h
+++ /dev/null
@@ -1,161 +0,0 @@
-#ifndef __SH_CLOCK_H
-#define __SH_CLOCK_H
-
-#include <linux/list.h>
-#include <linux/seq_file.h>
-#include <linux/cpufreq.h>
-#include <linux/types.h>
-#include <linux/kref.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-
-struct clk;
-
-struct clk_mapping {
-	phys_addr_t		phys;
-	void __iomem		*base;
-	unsigned long		len;
-	struct kref		ref;
-};
-
-
-struct sh_clk_ops {
-#ifdef CONFIG_SH_CLK_CPG_LEGACY
-	void (*init)(struct clk *clk);
-#endif
-	int (*enable)(struct clk *clk);
-	void (*disable)(struct clk *clk);
-	unsigned long (*recalc)(struct clk *clk);
-	int (*set_rate)(struct clk *clk, unsigned long rate);
-	int (*set_parent)(struct clk *clk, struct clk *parent);
-	long (*round_rate)(struct clk *clk, unsigned long rate);
-};
-
-struct clk {
-	struct list_head	node;
-	struct clk		*parent;
-	struct clk		**parent_table;	/* list of parents to */
-	unsigned short		parent_num;	/* choose between */
-	unsigned char		src_shift;	/* source clock field in the */
-	unsigned char		src_width;	/* configuration register */
-	struct sh_clk_ops	*ops;
-
-	struct list_head	children;
-	struct list_head	sibling;	/* node for children */
-
-	int			usecount;
-
-	unsigned long		rate;
-	unsigned long		flags;
-
-	void __iomem		*enable_reg;
-	unsigned int		enable_bit;
-	void __iomem		*mapped_reg;
-
-	unsigned long		arch_flags;
-	void			*priv;
-	struct clk_mapping	*mapping;
-	struct cpufreq_frequency_table *freq_table;
-	unsigned int		nr_freqs;
-};
-
-#define CLK_ENABLE_ON_INIT	(1 << 0)
-
-/* drivers/sh/clk.c */
-unsigned long followparent_recalc(struct clk *);
-void recalculate_root_clocks(void);
-void propagate_rate(struct clk *);
-int clk_reparent(struct clk *child, struct clk *parent);
-int clk_register(struct clk *);
-void clk_unregister(struct clk *);
-void clk_enable_init_clocks(void);
-
-struct clk_div_mult_table {
-	unsigned int *divisors;
-	unsigned int nr_divisors;
-	unsigned int *multipliers;
-	unsigned int nr_multipliers;
-};
-
-struct cpufreq_frequency_table;
-void clk_rate_table_build(struct clk *clk,
-			  struct cpufreq_frequency_table *freq_table,
-			  int nr_freqs,
-			  struct clk_div_mult_table *src_table,
-			  unsigned long *bitmap);
-
-long clk_rate_table_round(struct clk *clk,
-			  struct cpufreq_frequency_table *freq_table,
-			  unsigned long rate);
-
-int clk_rate_table_find(struct clk *clk,
-			struct cpufreq_frequency_table *freq_table,
-			unsigned long rate);
-
-long clk_rate_div_range_round(struct clk *clk, unsigned int div_min,
-			      unsigned int div_max, unsigned long rate);
-
-long clk_rate_mult_range_round(struct clk *clk, unsigned int mult_min,
-			       unsigned int mult_max, unsigned long rate);
-
-long clk_round_parent(struct clk *clk, unsigned long target,
-		      unsigned long *best_freq, unsigned long *parent_freq,
-		      unsigned int div_min, unsigned int div_max);
-
-#define SH_CLK_MSTP32(_parent, _enable_reg, _enable_bit, _flags)	\
-{									\
-	.parent		= _parent,					\
-	.enable_reg	= (void __iomem *)_enable_reg,			\
-	.enable_bit	= _enable_bit,					\
-	.flags		= _flags,					\
-}
-
-int sh_clk_mstp32_register(struct clk *clks, int nr);
-
-#define SH_CLK_DIV4(_parent, _reg, _shift, _div_bitmap, _flags)	\
-{								\
-	.parent = _parent,					\
-	.enable_reg = (void __iomem *)_reg,			\
-	.enable_bit = _shift,					\
-	.arch_flags = _div_bitmap,				\
-	.flags = _flags,					\
-}
-
-struct clk_div4_table {
-	struct clk_div_mult_table *div_mult_table;
-	void (*kick)(struct clk *clk);
-};
-
-int sh_clk_div4_register(struct clk *clks, int nr,
-			 struct clk_div4_table *table);
-int sh_clk_div4_enable_register(struct clk *clks, int nr,
-			 struct clk_div4_table *table);
-int sh_clk_div4_reparent_register(struct clk *clks, int nr,
-			 struct clk_div4_table *table);
-
-#define SH_CLK_DIV6_EXT(_reg, _flags, _parents,			\
-			_num_parents, _src_shift, _src_width)	\
-{								\
-	.enable_reg = (void __iomem *)_reg,			\
-	.flags = _flags,					\
-	.parent_table = _parents,				\
-	.parent_num = _num_parents,				\
-	.src_shift = _src_shift,				\
-	.src_width = _src_width,				\
-}
-
-#define SH_CLK_DIV6(_parent, _reg, _flags)			\
-{								\
-	.parent		= _parent,				\
-	.enable_reg	= (void __iomem *)_reg,			\
-	.flags		= _flags,				\
-}
-
-int sh_clk_div6_register(struct clk *clks, int nr);
-int sh_clk_div6_reparent_register(struct clk *clks, int nr);
-
-#define CLKDEV_CON_ID(_id, _clk) { .con_id = _id, .clk = _clk }
-#define CLKDEV_DEV_ID(_id, _clk) { .dev_id = _id, .clk = _clk }
-#define CLKDEV_ICK_ID(_cid, _did, _clk) { .con_id = _cid, .dev_id = _did, .clk = _clk }
-
-#endif /* __SH_CLOCK_H */
diff --git a/ANDROID_3.4.5/include/linux/sh_dma.h b/ANDROID_3.4.5/include/linux/sh_dma.h
deleted file mode 100644
index 425450b9..00000000
--- a/ANDROID_3.4.5/include/linux/sh_dma.h
+++ /dev/null
@@ -1,113 +0,0 @@
-/*
- * Header for the new SH dmaengine driver
- *
- * Copyright (C) 2010 Guennadi Liakhovetski <g.liakhovetski@gmx.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef SH_DMA_H
-#define SH_DMA_H
-
-#include <linux/list.h>
-#include <linux/dmaengine.h>
-
-/* Used by slave DMA clients to request DMA to/from a specific peripheral */
-struct sh_dmae_slave {
-	unsigned int			slave_id; /* Set by the platform */
-	struct device			*dma_dev; /* Set by the platform */
-	const struct sh_dmae_slave_config	*config;  /* Set by the driver */
-};
-
-struct sh_dmae_regs {
-	u32 sar; /* SAR / source address */
-	u32 dar; /* DAR / destination address */
-	u32 tcr; /* TCR / transfer count */
-};
-
-struct sh_desc {
-	struct sh_dmae_regs hw;
-	struct list_head node;
-	struct dma_async_tx_descriptor async_tx;
-	enum dma_transfer_direction direction;
-	dma_cookie_t cookie;
-	size_t partial;
-	int chunks;
-	int mark;
-};
-
-struct sh_dmae_slave_config {
-	unsigned int			slave_id;
-	dma_addr_t			addr;
-	u32				chcr;
-	char				mid_rid;
-};
-
-struct sh_dmae_channel {
-	unsigned int	offset;
-	unsigned int	dmars;
-	unsigned int	dmars_bit;
-	unsigned int	chclr_offset;
-};
-
-struct sh_dmae_pdata {
-	const struct sh_dmae_slave_config *slave;
-	int slave_num;
-	const struct sh_dmae_channel *channel;
-	int channel_num;
-	unsigned int ts_low_shift;
-	unsigned int ts_low_mask;
-	unsigned int ts_high_shift;
-	unsigned int ts_high_mask;
-	const unsigned int *ts_shift;
-	int ts_shift_num;
-	u16 dmaor_init;
-	unsigned int chcr_offset;
-	u32 chcr_ie_bit;
-
-	unsigned int dmaor_is_32bit:1;
-	unsigned int needs_tend_set:1;
-	unsigned int no_dmars:1;
-	unsigned int chclr_present:1;
-	unsigned int slave_only:1;
-};
-
-/* DMA register */
-#define SAR	0x00
-#define DAR	0x04
-#define TCR	0x08
-#define CHCR	0x0C
-#define DMAOR	0x40
-
-#define TEND	0x18 /* USB-DMAC */
-
-/* DMAOR definitions */
-#define DMAOR_AE	0x00000004
-#define DMAOR_NMIF	0x00000002
-#define DMAOR_DME	0x00000001
-
-/* Definitions for the SuperH DMAC */
-#define REQ_L	0x00000000
-#define REQ_E	0x00080000
-#define RACK_H	0x00000000
-#define RACK_L	0x00040000
-#define ACK_R	0x00000000
-#define ACK_W	0x00020000
-#define ACK_H	0x00000000
-#define ACK_L	0x00010000
-#define DM_INC	0x00004000
-#define DM_DEC	0x00008000
-#define DM_FIX	0x0000c000
-#define SM_INC	0x00001000
-#define SM_DEC	0x00002000
-#define SM_FIX	0x00003000
-#define RS_IN	0x00000200
-#define RS_OUT	0x00000300
-#define TS_BLK	0x00000040
-#define TM_BUR	0x00000020
-#define CHCR_DE	0x00000001
-#define CHCR_TE	0x00000002
-#define CHCR_IE	0x00000004
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/sh_eth.h b/ANDROID_3.4.5/include/linux/sh_eth.h
deleted file mode 100644
index b17d765d..00000000
--- a/ANDROID_3.4.5/include/linux/sh_eth.h
+++ /dev/null
@@ -1,26 +0,0 @@
-#ifndef __ASM_SH_ETH_H__
-#define __ASM_SH_ETH_H__
-
-#include <linux/phy.h>
-
-enum {EDMAC_LITTLE_ENDIAN, EDMAC_BIG_ENDIAN};
-enum {
-	SH_ETH_REG_GIGABIT,
-	SH_ETH_REG_FAST_SH4,
-	SH_ETH_REG_FAST_SH3_SH2
-};
-
-struct sh_eth_plat_data {
-	int phy;
-	int edmac_endian;
-	int register_type;
-	phy_interface_t phy_interface;
-	void (*set_mdio_gate)(void *addr);
-
-	unsigned char mac_addr[6];
-	unsigned no_ether_link:1;
-	unsigned ether_link_active_low:1;
-	unsigned needs_init:1;
-};
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/sh_intc.h b/ANDROID_3.4.5/include/linux/sh_intc.h
deleted file mode 100644
index 6aed0805..00000000
--- a/ANDROID_3.4.5/include/linux/sh_intc.h
+++ /dev/null
@@ -1,150 +0,0 @@
-#ifndef __SH_INTC_H
-#define __SH_INTC_H
-
-#include <linux/ioport.h>
-
-#ifdef CONFIG_SUPERH
-#define INTC_NR_IRQS	512
-#else
-#define INTC_NR_IRQS	1024
-#endif
-
-/*
- * Convert back and forth between INTEVT and IRQ values.
- */
-#ifdef CONFIG_CPU_HAS_INTEVT
-#define evt2irq(evt)		(((evt) >> 5) - 16)
-#define irq2evt(irq)		(((irq) + 16) << 5)
-#else
-#define evt2irq(evt)		(evt)
-#define irq2evt(irq)		(irq)
-#endif
-
-typedef unsigned char intc_enum;
-
-struct intc_vect {
-	intc_enum enum_id;
-	unsigned short vect;
-};
-
-#define INTC_VECT(enum_id, vect) { enum_id, vect }
-#define INTC_IRQ(enum_id, irq) INTC_VECT(enum_id, irq2evt(irq))
-
-struct intc_group {
-	intc_enum enum_id;
-	intc_enum enum_ids[32];
-};
-
-#define INTC_GROUP(enum_id, ids...) { enum_id, { ids } }
-
-struct intc_subgroup {
-	unsigned long reg, reg_width;
-	intc_enum parent_id;
-	intc_enum enum_ids[32];
-};
-
-struct intc_mask_reg {
-	unsigned long set_reg, clr_reg, reg_width;
-	intc_enum enum_ids[32];
-#ifdef CONFIG_INTC_BALANCING
-	unsigned long dist_reg;
-#endif
-#ifdef CONFIG_SMP
-	unsigned long smp;
-#endif
-};
-
-struct intc_prio_reg {
-	unsigned long set_reg, clr_reg, reg_width, field_width;
-	intc_enum enum_ids[16];
-#ifdef CONFIG_SMP
-	unsigned long smp;
-#endif
-};
-
-struct intc_sense_reg {
-	unsigned long reg, reg_width, field_width;
-	intc_enum enum_ids[16];
-};
-
-#ifdef CONFIG_INTC_BALANCING
-#define INTC_SMP_BALANCING(reg)	.dist_reg = (reg)
-#else
-#define INTC_SMP_BALANCING(reg)
-#endif
-
-#ifdef CONFIG_SMP
-#define INTC_SMP(stride, nr)	.smp = (stride) | ((nr) << 8)
-#else
-#define INTC_SMP(stride, nr)
-#endif
-
-struct intc_hw_desc {
-	struct intc_vect *vectors;
-	unsigned int nr_vectors;
-	struct intc_group *groups;
-	unsigned int nr_groups;
-	struct intc_mask_reg *mask_regs;
-	unsigned int nr_mask_regs;
-	struct intc_prio_reg *prio_regs;
-	unsigned int nr_prio_regs;
-	struct intc_sense_reg *sense_regs;
-	unsigned int nr_sense_regs;
-	struct intc_mask_reg *ack_regs;
-	unsigned int nr_ack_regs;
-	struct intc_subgroup *subgroups;
-	unsigned int nr_subgroups;
-};
-
-#define _INTC_ARRAY(a) a, __same_type(a, NULL) ? 0 : sizeof(a)/sizeof(*a)
-
-#define INTC_HW_DESC(vectors, groups, mask_regs,	\
-		     prio_regs,	sense_regs, ack_regs)	\
-{							\
-	_INTC_ARRAY(vectors), _INTC_ARRAY(groups),	\
-	_INTC_ARRAY(mask_regs), _INTC_ARRAY(prio_regs),	\
-	_INTC_ARRAY(sense_regs), _INTC_ARRAY(ack_regs),	\
-}
-
-struct intc_desc {
-	char *name;
-	struct resource *resource;
-	unsigned int num_resources;
-	intc_enum force_enable;
-	intc_enum force_disable;
-	bool skip_syscore_suspend;
-	struct intc_hw_desc hw;
-};
-
-#define DECLARE_INTC_DESC(symbol, chipname, vectors, groups,		\
-	mask_regs, prio_regs, sense_regs)				\
-struct intc_desc symbol __initdata = {					\
-	.name = chipname,						\
-	.hw = INTC_HW_DESC(vectors, groups, mask_regs,			\
-			   prio_regs, sense_regs, NULL),		\
-}
-
-#define DECLARE_INTC_DESC_ACK(symbol, chipname, vectors, groups,	\
-	mask_regs, prio_regs, sense_regs, ack_regs)			\
-struct intc_desc symbol __initdata = {					\
-	.name = chipname,						\
-	.hw = INTC_HW_DESC(vectors, groups, mask_regs,			\
-			   prio_regs, sense_regs, ack_regs),		\
-}
-
-int register_intc_controller(struct intc_desc *desc);
-void reserve_intc_vectors(struct intc_vect *vectors, unsigned int nr_vecs);
-int intc_set_priority(unsigned int irq, unsigned int prio);
-int intc_irq_lookup(const char *chipname, intc_enum enum_id);
-void intc_finalize(void);
-
-#ifdef CONFIG_INTC_USERIMASK
-int register_intc_userimask(unsigned long addr);
-#else
-static inline int register_intc_userimask(unsigned long addr)
-{
-	return 0;
-}
-#endif
-
-#endif /* __SH_INTC_H */
diff --git a/ANDROID_3.4.5/include/linux/sh_pfc.h b/ANDROID_3.4.5/include/linux/sh_pfc.h
deleted file mode 100644
index 5c15aed9..00000000
--- a/ANDROID_3.4.5/include/linux/sh_pfc.h
+++ /dev/null
@@ -1,203 +0,0 @@
-/*
- * SuperH Pin Function Controller Support
- *
- * Copyright (c) 2008 Magnus Damm
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef __SH_PFC_H
-#define __SH_PFC_H
-
-#include <asm-generic/gpio.h>
-
-typedef unsigned short pinmux_enum_t;
-typedef unsigned short pinmux_flag_t;
-
-#define PINMUX_TYPE_NONE            0
-#define PINMUX_TYPE_FUNCTION        1
-#define PINMUX_TYPE_GPIO            2
-#define PINMUX_TYPE_OUTPUT          3
-#define PINMUX_TYPE_INPUT           4
-#define PINMUX_TYPE_INPUT_PULLUP    5
-#define PINMUX_TYPE_INPUT_PULLDOWN  6
-
-#define PINMUX_FLAG_TYPE            (0x7)
-#define PINMUX_FLAG_WANT_PULLUP     (1 << 3)
-#define PINMUX_FLAG_WANT_PULLDOWN   (1 << 4)
-
-#define PINMUX_FLAG_DBIT_SHIFT      5
-#define PINMUX_FLAG_DBIT            (0x1f << PINMUX_FLAG_DBIT_SHIFT)
-#define PINMUX_FLAG_DREG_SHIFT      10
-#define PINMUX_FLAG_DREG            (0x3f << PINMUX_FLAG_DREG_SHIFT)
-
-struct pinmux_gpio {
-	pinmux_enum_t enum_id;
-	pinmux_flag_t flags;
-};
-
-#define PINMUX_GPIO(gpio, data_or_mark) [gpio] = { data_or_mark }
-#define PINMUX_DATA(data_or_mark, ids...) data_or_mark, ids, 0
-
-struct pinmux_cfg_reg {
-	unsigned long reg, reg_width, field_width;
-	unsigned long *cnt;
-	pinmux_enum_t *enum_ids;
-	unsigned long *var_field_width;
-};
-
-#define PINMUX_CFG_REG(name, r, r_width, f_width) \
-	.reg = r, .reg_width = r_width, .field_width = f_width,		\
-	.cnt = (unsigned long [r_width / f_width]) {}, \
-	.enum_ids = (pinmux_enum_t [(r_width / f_width) * (1 << f_width)])
-
-#define PINMUX_CFG_REG_VAR(name, r, r_width, var_fw0, var_fwn...) \
-	.reg = r, .reg_width = r_width,	\
-	.cnt = (unsigned long [r_width]) {}, \
-	.var_field_width = (unsigned long [r_width]) { var_fw0, var_fwn, 0 }, \
-	.enum_ids = (pinmux_enum_t [])
-
-struct pinmux_data_reg {
-	unsigned long reg, reg_width, reg_shadow;
-	pinmux_enum_t *enum_ids;
-	void __iomem *mapped_reg;
-};
-
-#define PINMUX_DATA_REG(name, r, r_width) \
-	.reg = r, .reg_width = r_width,	\
-	.enum_ids = (pinmux_enum_t [r_width]) \
-
-struct pinmux_irq {
-	int irq;
-	pinmux_enum_t *enum_ids;
-};
-
-#define PINMUX_IRQ(irq_nr, ids...)			   \
-	{ .irq = irq_nr, .enum_ids = (pinmux_enum_t []) { ids, 0 } }	\
-
-struct pinmux_range {
-	pinmux_enum_t begin;
-	pinmux_enum_t end;
-	pinmux_enum_t force;
-};
-
-struct pfc_window {
-	phys_addr_t phys;
-	void __iomem *virt;
-	unsigned long size;
-};
-
-struct pinmux_info {
-	char *name;
-	pinmux_enum_t reserved_id;
-	struct pinmux_range data;
-	struct pinmux_range input;
-	struct pinmux_range input_pd;
-	struct pinmux_range input_pu;
-	struct pinmux_range output;
-	struct pinmux_range mark;
-	struct pinmux_range function;
-
-	unsigned first_gpio, last_gpio;
-
-	struct pinmux_gpio *gpios;
-	struct pinmux_cfg_reg *cfg_regs;
-	struct pinmux_data_reg *data_regs;
-
-	pinmux_enum_t *gpio_data;
-	unsigned int gpio_data_size;
-
-	struct pinmux_irq *gpio_irq;
-	unsigned int gpio_irq_size;
-
-	struct resource *resource;
-	unsigned int num_resources;
-	struct pfc_window *window;
-
-	unsigned long unlock_reg;
-
-	struct gpio_chip chip;
-};
-
-int register_pinmux(struct pinmux_info *pip);
-int unregister_pinmux(struct pinmux_info *pip);
-
-/* helper macro for port */
-#define PORT_1(fn, pfx, sfx) fn(pfx, sfx)
-
-#define PORT_10(fn, pfx, sfx) \
-	PORT_1(fn, pfx##0, sfx), PORT_1(fn, pfx##1, sfx),	\
-	PORT_1(fn, pfx##2, sfx), PORT_1(fn, pfx##3, sfx),	\
-	PORT_1(fn, pfx##4, sfx), PORT_1(fn, pfx##5, sfx),	\
-	PORT_1(fn, pfx##6, sfx), PORT_1(fn, pfx##7, sfx),	\
-	PORT_1(fn, pfx##8, sfx), PORT_1(fn, pfx##9, sfx)
-
-#define PORT_90(fn, pfx, sfx) \
-	PORT_10(fn, pfx##1, sfx), PORT_10(fn, pfx##2, sfx),	\
-	PORT_10(fn, pfx##3, sfx), PORT_10(fn, pfx##4, sfx),	\
-	PORT_10(fn, pfx##5, sfx), PORT_10(fn, pfx##6, sfx),	\
-	PORT_10(fn, pfx##7, sfx), PORT_10(fn, pfx##8, sfx),	\
-	PORT_10(fn, pfx##9, sfx)
-
-#define _PORT_ALL(pfx, sfx) pfx##_##sfx
-#define _GPIO_PORT(pfx, sfx) PINMUX_GPIO(GPIO_PORT##pfx, PORT##pfx##_DATA)
-#define PORT_ALL(str)	CPU_ALL_PORT(_PORT_ALL, PORT, str)
-#define GPIO_PORT_ALL()	CPU_ALL_PORT(_GPIO_PORT, , unused)
-#define GPIO_FN(str) PINMUX_GPIO(GPIO_FN_##str, str##_MARK)
-
-/* helper macro for pinmux_enum_t */
-#define PORT_DATA_I(nr)	\
-	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_IN)
-
-#define PORT_DATA_I_PD(nr)	\
-	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0,	\
-		    PORT##nr##_IN, PORT##nr##_IN_PD)
-
-#define PORT_DATA_I_PU(nr)	\
-	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0,	\
-		    PORT##nr##_IN, PORT##nr##_IN_PU)
-
-#define PORT_DATA_I_PU_PD(nr)	\
-	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0,			\
-		    PORT##nr##_IN, PORT##nr##_IN_PD, PORT##nr##_IN_PU)
-
-#define PORT_DATA_O(nr)		\
-	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT)
-
-#define PORT_DATA_IO(nr)	\
-	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT,	\
-		    PORT##nr##_IN)
-
-#define PORT_DATA_IO_PD(nr)	\
-	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT,	\
-		    PORT##nr##_IN, PORT##nr##_IN_PD)
-
-#define PORT_DATA_IO_PU(nr)	\
-	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT,	\
-		    PORT##nr##_IN, PORT##nr##_IN_PU)
-
-#define PORT_DATA_IO_PU_PD(nr)	\
-	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT,	\
-		    PORT##nr##_IN, PORT##nr##_IN_PD, PORT##nr##_IN_PU)
-
-/* helper macro for top 4 bits in PORTnCR */
-#define _PCRH(in, in_pd, in_pu, out)	\
-	0, (out), (in), 0,		\
-	0, 0, 0, 0,			\
-	0, 0, (in_pd), 0,		\
-	0, 0, (in_pu), 0
-
-#define PORTCR(nr, reg)							\
-	{								\
-		PINMUX_CFG_REG("PORT" nr "CR", reg, 8, 4) {		\
-			_PCRH(PORT##nr##_IN, PORT##nr##_IN_PD,		\
-			      PORT##nr##_IN_PU, PORT##nr##_OUT),	\
-				PORT##nr##_FN0, PORT##nr##_FN1,		\
-				PORT##nr##_FN2, PORT##nr##_FN3,		\
-				PORT##nr##_FN4, PORT##nr##_FN5,		\
-				PORT##nr##_FN6, PORT##nr##_FN7 }	\
-	}
-
-#endif /* __SH_PFC_H */
diff --git a/ANDROID_3.4.5/include/linux/sh_timer.h b/ANDROID_3.4.5/include/linux/sh_timer.h
deleted file mode 100644
index 4d9dcd13..00000000
--- a/ANDROID_3.4.5/include/linux/sh_timer.h
+++ /dev/null
@@ -1,12 +0,0 @@
-#ifndef __SH_TIMER_H__
-#define __SH_TIMER_H__
-
-struct sh_timer_config {
-	char *name;
-	long channel_offset;
-	int timer_bit;
-	unsigned long clockevent_rating;
-	unsigned long clocksource_rating;
-};
-
-#endif /* __SH_TIMER_H__ */
diff --git a/ANDROID_3.4.5/include/linux/sha256.h b/ANDROID_3.4.5/include/linux/sha256.h
deleted file mode 100644
index cf883a2e..00000000
--- a/ANDROID_3.4.5/include/linux/sha256.h
+++ /dev/null
@@ -1,25 +0,0 @@
-#ifndef _SHA256_H
-#define _SHA256_H
-
-#ifndef uint8
-#define uint8  unsigned char
-#endif
-
-#ifndef uint32
-#define uint32 unsigned long int
-#endif
-
-typedef struct
-{
-    uint32 total[2];
-    uint32 state[8];
-    uint8 buffer[64];
-}
-sha256_context;
-
-void sha256_starts( sha256_context *ctx );
-void sha256_update( sha256_context *ctx, uint8 *input, uint32 length );
-void sha256_finish( sha256_context *ctx, uint8 digest[32] );
-
-#endif /* sha256.h */
-
diff --git a/ANDROID_3.4.5/include/linux/shm.h b/ANDROID_3.4.5/include/linux/shm.h
deleted file mode 100644
index 92808b86..00000000
--- a/ANDROID_3.4.5/include/linux/shm.h
+++ /dev/null
@@ -1,130 +0,0 @@
-#ifndef _LINUX_SHM_H_
-#define _LINUX_SHM_H_
-
-#include <linux/ipc.h>
-#include <linux/errno.h>
-#ifdef __KERNEL__
-#include <asm/page.h>
-#else
-#include <unistd.h>
-#endif
-
-/*
- * SHMMAX, SHMMNI and SHMALL are upper limits are defaults which can
- * be increased by sysctl
- */
-
-#define SHMMAX 0x2000000		 /* max shared seg size (bytes) */
-#define SHMMIN 1			 /* min shared seg size (bytes) */
-#define SHMMNI 4096			 /* max num of segs system wide */
-#ifdef __KERNEL__
-#define SHMALL (SHMMAX/PAGE_SIZE*(SHMMNI/16)) /* max shm system wide (pages) */
-#else
-#define SHMALL (SHMMAX/getpagesize()*(SHMMNI/16))
-#endif
-#define SHMSEG SHMMNI			 /* max shared segs per process */
-
-#ifdef __KERNEL__
-#include <asm/shmparam.h>
-#endif
-
-/* Obsolete, used only for backwards compatibility and libc5 compiles */
-struct shmid_ds {
-	struct ipc_perm		shm_perm;	/* operation perms */
-	int			shm_segsz;	/* size of segment (bytes) */
-	__kernel_time_t		shm_atime;	/* last attach time */
-	__kernel_time_t		shm_dtime;	/* last detach time */
-	__kernel_time_t		shm_ctime;	/* last change time */
-	__kernel_ipc_pid_t	shm_cpid;	/* pid of creator */
-	__kernel_ipc_pid_t	shm_lpid;	/* pid of last operator */
-	unsigned short		shm_nattch;	/* no. of current attaches */
-	unsigned short 		shm_unused;	/* compatibility */
-	void 			*shm_unused2;	/* ditto - used by DIPC */
-	void			*shm_unused3;	/* unused */
-};
-
-/* Include the definition of shmid64_ds and shminfo64 */
-#include <asm/shmbuf.h>
-
-/* permission flag for shmget */
-#define SHM_R		0400	/* or S_IRUGO from <linux/stat.h> */
-#define SHM_W		0200	/* or S_IWUGO from <linux/stat.h> */
-
-/* mode for attach */
-#define	SHM_RDONLY	010000	/* read-only access */
-#define	SHM_RND		020000	/* round attach address to SHMLBA boundary */
-#define	SHM_REMAP	040000	/* take-over region on attach */
-#define	SHM_EXEC	0100000	/* execution access */
-
-/* super user shmctl commands */
-#define SHM_LOCK 	11
-#define SHM_UNLOCK 	12
-
-/* ipcs ctl commands */
-#define SHM_STAT 	13
-#define SHM_INFO 	14
-
-/* Obsolete, used only for backwards compatibility */
-struct	shminfo {
-	int shmmax;
-	int shmmin;
-	int shmmni;
-	int shmseg;
-	int shmall;
-};
-
-struct shm_info {
-	int used_ids;
-	unsigned long shm_tot;	/* total allocated shm */
-	unsigned long shm_rss;	/* total resident shm */
-	unsigned long shm_swp;	/* total swapped shm */
-	unsigned long swap_attempts;
-	unsigned long swap_successes;
-};
-
-#ifdef __KERNEL__
-struct shmid_kernel /* private to the kernel */
-{	
-	struct kern_ipc_perm	shm_perm;
-	struct file *		shm_file;
-	unsigned long		shm_nattch;
-	unsigned long		shm_segsz;
-	time_t			shm_atim;
-	time_t			shm_dtim;
-	time_t			shm_ctim;
-	pid_t			shm_cprid;
-	pid_t			shm_lprid;
-	struct user_struct	*mlock_user;
-
-	/* The task created the shm object.  NULL if the task is dead. */
-	struct task_struct	*shm_creator;
-};
-
-/* shm_mode upper byte flags */
-#define	SHM_DEST	01000	/* segment will be destroyed on last detach */
-#define SHM_LOCKED      02000   /* segment will not be swapped */
-#define SHM_HUGETLB     04000   /* segment will use huge TLB pages */
-#define SHM_NORESERVE   010000  /* don't check for reservations */
-
-#ifdef CONFIG_SYSVIPC
-long do_shmat(int shmid, char __user *shmaddr, int shmflg, unsigned long *addr);
-extern int is_file_shm_hugepages(struct file *file);
-extern void exit_shm(struct task_struct *task);
-#else
-static inline long do_shmat(int shmid, char __user *shmaddr,
-				int shmflg, unsigned long *addr)
-{
-	return -ENOSYS;
-}
-static inline int is_file_shm_hugepages(struct file *file)
-{
-	return 0;
-}
-static inline void exit_shm(struct task_struct *task)
-{
-}
-#endif
-
-#endif /* __KERNEL__ */
-
-#endif /* _LINUX_SHM_H_ */
diff --git a/ANDROID_3.4.5/include/linux/shmem_fs.h b/ANDROID_3.4.5/include/linux/shmem_fs.h
deleted file mode 100644
index 79ab2555..00000000
--- a/ANDROID_3.4.5/include/linux/shmem_fs.h
+++ /dev/null
@@ -1,64 +0,0 @@
-#ifndef __SHMEM_FS_H
-#define __SHMEM_FS_H
-
-#include <linux/swap.h>
-#include <linux/mempolicy.h>
-#include <linux/pagemap.h>
-#include <linux/percpu_counter.h>
-
-/* inode in-kernel data */
-
-struct shmem_inode_info {
-	spinlock_t		lock;
-	unsigned long		flags;
-	unsigned long		alloced;	/* data pages alloced to file */
-	union {
-		unsigned long	swapped;	/* subtotal assigned to swap */
-		char		*symlink;	/* unswappable short symlink */
-	};
-	struct shared_policy	policy;		/* NUMA memory alloc policy */
-	struct list_head	swaplist;	/* chain of maybes on swap */
-	struct list_head	xattr_list;	/* list of shmem_xattr */
-	struct inode		vfs_inode;
-};
-
-struct shmem_sb_info {
-	unsigned long max_blocks;   /* How many blocks are allowed */
-	struct percpu_counter used_blocks;  /* How many are allocated */
-	unsigned long max_inodes;   /* How many inodes are allowed */
-	unsigned long free_inodes;  /* How many are left for allocation */
-	spinlock_t stat_lock;	    /* Serialize shmem_sb_info changes */
-	uid_t uid;		    /* Mount uid for root directory */
-	gid_t gid;		    /* Mount gid for root directory */
-	umode_t mode;		    /* Mount mode for root directory */
-	struct mempolicy *mpol;     /* default memory policy for mappings */
-};
-
-static inline struct shmem_inode_info *SHMEM_I(struct inode *inode)
-{
-	return container_of(inode, struct shmem_inode_info, vfs_inode);
-}
-
-/*
- * Functions in mm/shmem.c called directly from elsewhere:
- */
-extern int shmem_init(void);
-extern int shmem_fill_super(struct super_block *sb, void *data, int silent);
-extern struct file *shmem_file_setup(const char *name,
-					loff_t size, unsigned long flags);
-extern int shmem_zero_setup(struct vm_area_struct *);
-extern int shmem_lock(struct file *file, int lock, struct user_struct *user);
-extern void shmem_unlock_mapping(struct address_space *mapping);
-extern struct page *shmem_read_mapping_page_gfp(struct address_space *mapping,
-					pgoff_t index, gfp_t gfp_mask);
-extern void shmem_truncate_range(struct inode *inode, loff_t start, loff_t end);
-extern int shmem_unuse(swp_entry_t entry, struct page *page);
-
-static inline struct page *shmem_read_mapping_page(
-				struct address_space *mapping, pgoff_t index)
-{
-	return shmem_read_mapping_page_gfp(mapping, index,
-					mapping_gfp_mask(mapping));
-}
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/shrinker.h b/ANDROID_3.4.5/include/linux/shrinker.h
deleted file mode 100644
index 07ceb97d..00000000
--- a/ANDROID_3.4.5/include/linux/shrinker.h
+++ /dev/null
@@ -1,43 +0,0 @@
-#ifndef _LINUX_SHRINKER_H
-#define _LINUX_SHRINKER_H
-
-/*
- * This struct is used to pass information from page reclaim to the shrinkers.
- * We consolidate the values for easier extention later.
- */
-struct shrink_control {
-	gfp_t gfp_mask;
-
-	/* How many slab objects shrinker() should scan and try to reclaim */
-	unsigned long nr_to_scan;
-};
-
-/*
- * A callback you can register to apply pressure to ageable caches.
- *
- * 'sc' is passed shrink_control which includes a count 'nr_to_scan'
- * and a 'gfpmask'.  It should look through the least-recently-used
- * 'nr_to_scan' entries and attempt to free them up.  It should return
- * the number of objects which remain in the cache.  If it returns -1, it means
- * it cannot do any scanning at this time (eg. there is a risk of deadlock).
- * The callback must not return -1 if nr_to_scan is zero.
- *
- * The 'gfpmask' refers to the allocation we are currently trying to
- * fulfil.
- *
- * Note that 'shrink' will be passed nr_to_scan == 0 when the VM is
- * querying the cache size, so a fastpath for that case is appropriate.
- */
-struct shrinker {
-	int (*shrink)(struct shrinker *, struct shrink_control *sc);
-	int seeks;	/* seeks to recreate an obj */
-	long batch;	/* reclaim batch size, 0 = default */
-
-	/* These are for internal use */
-	struct list_head list;
-	atomic_long_t nr_in_batch; /* objs pending delete */
-};
-#define DEFAULT_SEEKS 2 /* A good number if you don't know better. */
-extern void register_shrinker(struct shrinker *);
-extern void unregister_shrinker(struct shrinker *);
-#endif
diff --git a/ANDROID_3.4.5/include/linux/sht15.h b/ANDROID_3.4.5/include/linux/sht15.h
deleted file mode 100644
index f85c7c52..00000000
--- a/ANDROID_3.4.5/include/linux/sht15.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * sht15.h - support for the SHT15 Temperature and Humidity Sensor
- *
- * Copyright (c) 2009 Jonathan Cameron
- *
- * Copyright (c) 2007 Wouter Horre
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * For further information, see the Documentation/hwmon/sht15 file.
- */
-
-/**
- * struct sht15_platform_data - sht15 connectivity info
- * @gpio_data:		no. of gpio to which bidirectional data line is
- *			connected.
- * @gpio_sck:		no. of gpio to which the data clock is connected.
- * @supply_mv:		supply voltage in mv. Overridden by regulator if
- *			available.
- * @checksum:		flag to indicate the checksum should be validated.
- * @no_otp_reload:	flag to indicate no reload from OTP.
- * @low_resolution:	flag to indicate the temp/humidity resolution to use.
- */
-struct sht15_platform_data {
-	int gpio_data;
-	int gpio_sck;
-	int supply_mv;
-	bool checksum;
-	bool no_otp_reload;
-	bool low_resolution;
-};
-
diff --git a/ANDROID_3.4.5/include/linux/signal.h b/ANDROID_3.4.5/include/linux/signal.h
deleted file mode 100644
index 7987ce74..00000000
--- a/ANDROID_3.4.5/include/linux/signal.h
+++ /dev/null
@@ -1,391 +0,0 @@
-#ifndef _LINUX_SIGNAL_H
-#define _LINUX_SIGNAL_H
-
-#include <asm/signal.h>
-#include <asm/siginfo.h>
-
-#ifdef __KERNEL__
-#include <linux/list.h>
-
-struct task_struct;
-
-/* for sysctl */
-extern int print_fatal_signals;
-/*
- * Real Time signals may be queued.
- */
-
-struct sigqueue {
-	struct list_head list;
-	int flags;
-	siginfo_t info;
-	struct user_struct *user;
-};
-
-/* flags values. */
-#define SIGQUEUE_PREALLOC	1
-
-struct sigpending {
-	struct list_head list;
-	sigset_t signal;
-};
-
-/*
- * Define some primitives to manipulate sigset_t.
- */
-
-#ifndef __HAVE_ARCH_SIG_BITOPS
-#include <linux/bitops.h>
-
-/* We don't use <linux/bitops.h> for these because there is no need to
-   be atomic.  */
-static inline void sigaddset(sigset_t *set, int _sig)
-{
-	unsigned long sig = _sig - 1;
-	if (_NSIG_WORDS == 1)
-		set->sig[0] |= 1UL << sig;
-	else
-		set->sig[sig / _NSIG_BPW] |= 1UL << (sig % _NSIG_BPW);
-}
-
-static inline void sigdelset(sigset_t *set, int _sig)
-{
-	unsigned long sig = _sig - 1;
-	if (_NSIG_WORDS == 1)
-		set->sig[0] &= ~(1UL << sig);
-	else
-		set->sig[sig / _NSIG_BPW] &= ~(1UL << (sig % _NSIG_BPW));
-}
-
-static inline int sigismember(sigset_t *set, int _sig)
-{
-	unsigned long sig = _sig - 1;
-	if (_NSIG_WORDS == 1)
-		return 1 & (set->sig[0] >> sig);
-	else
-		return 1 & (set->sig[sig / _NSIG_BPW] >> (sig % _NSIG_BPW));
-}
-
-static inline int sigfindinword(unsigned long word)
-{
-	return ffz(~word);
-}
-
-#endif /* __HAVE_ARCH_SIG_BITOPS */
-
-static inline int sigisemptyset(sigset_t *set)
-{
-	extern void _NSIG_WORDS_is_unsupported_size(void);
-	switch (_NSIG_WORDS) {
-	case 4:
-		return (set->sig[3] | set->sig[2] |
-			set->sig[1] | set->sig[0]) == 0;
-	case 2:
-		return (set->sig[1] | set->sig[0]) == 0;
-	case 1:
-		return set->sig[0] == 0;
-	default:
-		_NSIG_WORDS_is_unsupported_size();
-		return 0;
-	}
-}
-
-#define sigmask(sig)	(1UL << ((sig) - 1))
-
-#ifndef __HAVE_ARCH_SIG_SETOPS
-#include <linux/string.h>
-
-#define _SIG_SET_BINOP(name, op)					\
-static inline void name(sigset_t *r, const sigset_t *a, const sigset_t *b) \
-{									\
-	extern void _NSIG_WORDS_is_unsupported_size(void);		\
-	unsigned long a0, a1, a2, a3, b0, b1, b2, b3;			\
-									\
-	switch (_NSIG_WORDS) {						\
-	    case 4:							\
-		a3 = a->sig[3]; a2 = a->sig[2];				\
-		b3 = b->sig[3]; b2 = b->sig[2];				\
-		r->sig[3] = op(a3, b3);					\
-		r->sig[2] = op(a2, b2);					\
-	    case 2:							\
-		a1 = a->sig[1]; b1 = b->sig[1];				\
-		r->sig[1] = op(a1, b1);					\
-	    case 1:							\
-		a0 = a->sig[0]; b0 = b->sig[0];				\
-		r->sig[0] = op(a0, b0);					\
-		break;							\
-	    default:							\
-		_NSIG_WORDS_is_unsupported_size();			\
-	}								\
-}
-
-#define _sig_or(x,y)	((x) | (y))
-_SIG_SET_BINOP(sigorsets, _sig_or)
-
-#define _sig_and(x,y)	((x) & (y))
-_SIG_SET_BINOP(sigandsets, _sig_and)
-
-#define _sig_andn(x,y)	((x) & ~(y))
-_SIG_SET_BINOP(sigandnsets, _sig_andn)
-
-#undef _SIG_SET_BINOP
-#undef _sig_or
-#undef _sig_and
-#undef _sig_andn
-
-#define _SIG_SET_OP(name, op)						\
-static inline void name(sigset_t *set)					\
-{									\
-	extern void _NSIG_WORDS_is_unsupported_size(void);		\
-									\
-	switch (_NSIG_WORDS) {						\
-	    case 4: set->sig[3] = op(set->sig[3]);			\
-		    set->sig[2] = op(set->sig[2]);			\
-	    case 2: set->sig[1] = op(set->sig[1]);			\
-	    case 1: set->sig[0] = op(set->sig[0]);			\
-		    break;						\
-	    default:							\
-		_NSIG_WORDS_is_unsupported_size();			\
-	}								\
-}
-
-#define _sig_not(x)	(~(x))
-_SIG_SET_OP(signotset, _sig_not)
-
-#undef _SIG_SET_OP
-#undef _sig_not
-
-static inline void sigemptyset(sigset_t *set)
-{
-	switch (_NSIG_WORDS) {
-	default:
-		memset(set, 0, sizeof(sigset_t));
-		break;
-	case 2: set->sig[1] = 0;
-	case 1:	set->sig[0] = 0;
-		break;
-	}
-}
-
-static inline void sigfillset(sigset_t *set)
-{
-	switch (_NSIG_WORDS) {
-	default:
-		memset(set, -1, sizeof(sigset_t));
-		break;
-	case 2: set->sig[1] = -1;
-	case 1:	set->sig[0] = -1;
-		break;
-	}
-}
-
-/* Some extensions for manipulating the low 32 signals in particular.  */
-
-static inline void sigaddsetmask(sigset_t *set, unsigned long mask)
-{
-	set->sig[0] |= mask;
-}
-
-static inline void sigdelsetmask(sigset_t *set, unsigned long mask)
-{
-	set->sig[0] &= ~mask;
-}
-
-static inline int sigtestsetmask(sigset_t *set, unsigned long mask)
-{
-	return (set->sig[0] & mask) != 0;
-}
-
-static inline void siginitset(sigset_t *set, unsigned long mask)
-{
-	set->sig[0] = mask;
-	switch (_NSIG_WORDS) {
-	default:
-		memset(&set->sig[1], 0, sizeof(long)*(_NSIG_WORDS-1));
-		break;
-	case 2: set->sig[1] = 0;
-	case 1: ;
-	}
-}
-
-static inline void siginitsetinv(sigset_t *set, unsigned long mask)
-{
-	set->sig[0] = ~mask;
-	switch (_NSIG_WORDS) {
-	default:
-		memset(&set->sig[1], -1, sizeof(long)*(_NSIG_WORDS-1));
-		break;
-	case 2: set->sig[1] = -1;
-	case 1: ;
-	}
-}
-
-#endif /* __HAVE_ARCH_SIG_SETOPS */
-
-static inline void init_sigpending(struct sigpending *sig)
-{
-	sigemptyset(&sig->signal);
-	INIT_LIST_HEAD(&sig->list);
-}
-
-extern void flush_sigqueue(struct sigpending *queue);
-
-/* Test if 'sig' is valid signal. Use this instead of testing _NSIG directly */
-static inline int valid_signal(unsigned long sig)
-{
-	return sig <= _NSIG ? 1 : 0;
-}
-
-struct timespec;
-struct pt_regs;
-
-extern int next_signal(struct sigpending *pending, sigset_t *mask);
-extern int do_send_sig_info(int sig, struct siginfo *info,
-				struct task_struct *p, bool group);
-extern int group_send_sig_info(int sig, struct siginfo *info, struct task_struct *p);
-extern int __group_send_sig_info(int, struct siginfo *, struct task_struct *);
-extern long do_rt_tgsigqueueinfo(pid_t tgid, pid_t pid, int sig,
-				 siginfo_t *info);
-extern long do_sigpending(void __user *, unsigned long);
-extern int do_sigtimedwait(const sigset_t *, siginfo_t *,
-				const struct timespec *);
-extern int sigprocmask(int, sigset_t *, sigset_t *);
-extern void set_current_blocked(const sigset_t *);
-extern int show_unhandled_signals;
-
-extern int get_signal_to_deliver(siginfo_t *info, struct k_sigaction *return_ka, struct pt_regs *regs, void *cookie);
-extern void block_sigmask(struct k_sigaction *ka, int signr);
-extern void exit_signals(struct task_struct *tsk);
-
-extern struct kmem_cache *sighand_cachep;
-
-int unhandled_signal(struct task_struct *tsk, int sig);
-
-/*
- * In POSIX a signal is sent either to a specific thread (Linux task)
- * or to the process as a whole (Linux thread group).  How the signal
- * is sent determines whether it's to one thread or the whole group,
- * which determines which signal mask(s) are involved in blocking it
- * from being delivered until later.  When the signal is delivered,
- * either it's caught or ignored by a user handler or it has a default
- * effect that applies to the whole thread group (POSIX process).
- *
- * The possible effects an unblocked signal set to SIG_DFL can have are:
- *   ignore	- Nothing Happens
- *   terminate	- kill the process, i.e. all threads in the group,
- * 		  similar to exit_group.  The group leader (only) reports
- *		  WIFSIGNALED status to its parent.
- *   coredump	- write a core dump file describing all threads using
- *		  the same mm and then kill all those threads
- *   stop 	- stop all the threads in the group, i.e. TASK_STOPPED state
- *
- * SIGKILL and SIGSTOP cannot be caught, blocked, or ignored.
- * Other signals when not blocked and set to SIG_DFL behaves as follows.
- * The job control signals also have other special effects.
- *
- *	+--------------------+------------------+
- *	|  POSIX signal      |  default action  |
- *	+--------------------+------------------+
- *	|  SIGHUP            |  terminate	|
- *	|  SIGINT            |	terminate	|
- *	|  SIGQUIT           |	coredump 	|
- *	|  SIGILL            |	coredump 	|
- *	|  SIGTRAP           |	coredump 	|
- *	|  SIGABRT/SIGIOT    |	coredump 	|
- *	|  SIGBUS            |	coredump 	|
- *	|  SIGFPE            |	coredump 	|
- *	|  SIGKILL           |	terminate(+)	|
- *	|  SIGUSR1           |	terminate	|
- *	|  SIGSEGV           |	coredump 	|
- *	|  SIGUSR2           |	terminate	|
- *	|  SIGPIPE           |	terminate	|
- *	|  SIGALRM           |	terminate	|
- *	|  SIGTERM           |	terminate	|
- *	|  SIGCHLD           |	ignore   	|
- *	|  SIGCONT           |	ignore(*)	|
- *	|  SIGSTOP           |	stop(*)(+)  	|
- *	|  SIGTSTP           |	stop(*)  	|
- *	|  SIGTTIN           |	stop(*)  	|
- *	|  SIGTTOU           |	stop(*)  	|
- *	|  SIGURG            |	ignore   	|
- *	|  SIGXCPU           |	coredump 	|
- *	|  SIGXFSZ           |	coredump 	|
- *	|  SIGVTALRM         |	terminate	|
- *	|  SIGPROF           |	terminate	|
- *	|  SIGPOLL/SIGIO     |	terminate	|
- *	|  SIGSYS/SIGUNUSED  |	coredump 	|
- *	|  SIGSTKFLT         |	terminate	|
- *	|  SIGWINCH          |	ignore   	|
- *	|  SIGPWR            |	terminate	|
- *	|  SIGRTMIN-SIGRTMAX |	terminate       |
- *	+--------------------+------------------+
- *	|  non-POSIX signal  |  default action  |
- *	+--------------------+------------------+
- *	|  SIGEMT            |  coredump	|
- *	+--------------------+------------------+
- *
- * (+) For SIGKILL and SIGSTOP the action is "always", not just "default".
- * (*) Special job control effects:
- * When SIGCONT is sent, it resumes the process (all threads in the group)
- * from TASK_STOPPED state and also clears any pending/queued stop signals
- * (any of those marked with "stop(*)").  This happens regardless of blocking,
- * catching, or ignoring SIGCONT.  When any stop signal is sent, it clears
- * any pending/queued SIGCONT signals; this happens regardless of blocking,
- * catching, or ignored the stop signal, though (except for SIGSTOP) the
- * default action of stopping the process may happen later or never.
- */
-
-#ifdef SIGEMT
-#define SIGEMT_MASK	rt_sigmask(SIGEMT)
-#else
-#define SIGEMT_MASK	0
-#endif
-
-#if SIGRTMIN > BITS_PER_LONG
-#define rt_sigmask(sig)	(1ULL << ((sig)-1))
-#else
-#define rt_sigmask(sig)	sigmask(sig)
-#endif
-#define siginmask(sig, mask) (rt_sigmask(sig) & (mask))
-
-#define SIG_KERNEL_ONLY_MASK (\
-	rt_sigmask(SIGKILL)   |  rt_sigmask(SIGSTOP))
-
-#define SIG_KERNEL_STOP_MASK (\
-	rt_sigmask(SIGSTOP)   |  rt_sigmask(SIGTSTP)   | \
-	rt_sigmask(SIGTTIN)   |  rt_sigmask(SIGTTOU)   )
-
-#define SIG_KERNEL_COREDUMP_MASK (\
-        rt_sigmask(SIGQUIT)   |  rt_sigmask(SIGILL)    | \
-	rt_sigmask(SIGTRAP)   |  rt_sigmask(SIGABRT)   | \
-        rt_sigmask(SIGFPE)    |  rt_sigmask(SIGSEGV)   | \
-	rt_sigmask(SIGBUS)    |  rt_sigmask(SIGSYS)    | \
-        rt_sigmask(SIGXCPU)   |  rt_sigmask(SIGXFSZ)   | \
-	SIGEMT_MASK				       )
-
-#define SIG_KERNEL_IGNORE_MASK (\
-        rt_sigmask(SIGCONT)   |  rt_sigmask(SIGCHLD)   | \
-	rt_sigmask(SIGWINCH)  |  rt_sigmask(SIGURG)    )
-
-#define sig_kernel_only(sig) \
-	(((sig) < SIGRTMIN) && siginmask(sig, SIG_KERNEL_ONLY_MASK))
-#define sig_kernel_coredump(sig) \
-	(((sig) < SIGRTMIN) && siginmask(sig, SIG_KERNEL_COREDUMP_MASK))
-#define sig_kernel_ignore(sig) \
-	(((sig) < SIGRTMIN) && siginmask(sig, SIG_KERNEL_IGNORE_MASK))
-#define sig_kernel_stop(sig) \
-	(((sig) < SIGRTMIN) && siginmask(sig, SIG_KERNEL_STOP_MASK))
-
-#define sig_user_defined(t, signr) \
-	(((t)->sighand->action[(signr)-1].sa.sa_handler != SIG_DFL) &&	\
-	 ((t)->sighand->action[(signr)-1].sa.sa_handler != SIG_IGN))
-
-#define sig_fatal(t, signr) \
-	(!siginmask(signr, SIG_KERNEL_IGNORE_MASK|SIG_KERNEL_STOP_MASK) && \
-	 (t)->sighand->action[(signr)-1].sa.sa_handler == SIG_DFL)
-
-void signals_init(void);
-
-#endif /* __KERNEL__ */
-
-#endif /* _LINUX_SIGNAL_H */
diff --git a/ANDROID_3.4.5/include/linux/signalfd.h b/ANDROID_3.4.5/include/linux/signalfd.h
deleted file mode 100644
index 247399b2..00000000
--- a/ANDROID_3.4.5/include/linux/signalfd.h
+++ /dev/null
@@ -1,76 +0,0 @@
-/*
- *  include/linux/signalfd.h
- *
- *  Copyright (C) 2007  Davide Libenzi <davidel@xmailserver.org>
- *
- */
-
-#ifndef _LINUX_SIGNALFD_H
-#define _LINUX_SIGNALFD_H
-
-#include <linux/types.h>
-/* For O_CLOEXEC and O_NONBLOCK */
-#include <linux/fcntl.h>
-
-/* Flags for signalfd4.  */
-#define SFD_CLOEXEC O_CLOEXEC
-#define SFD_NONBLOCK O_NONBLOCK
-
-struct signalfd_siginfo {
-	__u32 ssi_signo;
-	__s32 ssi_errno;
-	__s32 ssi_code;
-	__u32 ssi_pid;
-	__u32 ssi_uid;
-	__s32 ssi_fd;
-	__u32 ssi_tid;
-	__u32 ssi_band;
-	__u32 ssi_overrun;
-	__u32 ssi_trapno;
-	__s32 ssi_status;
-	__s32 ssi_int;
-	__u64 ssi_ptr;
-	__u64 ssi_utime;
-	__u64 ssi_stime;
-	__u64 ssi_addr;
-	__u16 ssi_addr_lsb;
-
-	/*
-	 * Pad strcture to 128 bytes. Remember to update the
-	 * pad size when you add new members. We use a fixed
-	 * size structure to avoid compatibility problems with
-	 * future versions, and we leave extra space for additional
-	 * members. We use fixed size members because this strcture
-	 * comes out of a read(2) and we really don't want to have
-	 * a compat on read(2).
-	 */
-	__u8 __pad[46];
-};
-
-
-#ifdef __KERNEL__
-
-#ifdef CONFIG_SIGNALFD
-
-/*
- * Deliver the signal to listening signalfd.
- */
-static inline void signalfd_notify(struct task_struct *tsk, int sig)
-{
-	if (unlikely(waitqueue_active(&tsk->sighand->signalfd_wqh)))
-		wake_up(&tsk->sighand->signalfd_wqh);
-}
-
-extern void signalfd_cleanup(struct sighand_struct *sighand);
-
-#else /* CONFIG_SIGNALFD */
-
-static inline void signalfd_notify(struct task_struct *tsk, int sig) { }
-
-static inline void signalfd_cleanup(struct sighand_struct *sighand) { }
-
-#endif /* CONFIG_SIGNALFD */
-
-#endif /* __KERNEL__ */
-
-#endif /* _LINUX_SIGNALFD_H */
diff --git a/ANDROID_3.4.5/include/linux/sirfsoc_dma.h b/ANDROID_3.4.5/include/linux/sirfsoc_dma.h
deleted file mode 100644
index 29d95933..00000000
--- a/ANDROID_3.4.5/include/linux/sirfsoc_dma.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _SIRFSOC_DMA_H_
-#define _SIRFSOC_DMA_H_
-
-bool sirfsoc_dma_filter_id(struct dma_chan *chan, void *chan_id);
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/skbuff.h b/ANDROID_3.4.5/include/linux/skbuff.h
deleted file mode 100644
index c1bae8df..00000000
--- a/ANDROID_3.4.5/include/linux/skbuff.h
+++ /dev/null
@@ -1,2559 +0,0 @@
-/*
- *	Definitions for the 'struct sk_buff' memory handlers.
- *
- *	Authors:
- *		Alan Cox, <gw4pts@gw4pts.ampr.org>
- *		Florian La Roche, <rzsfl@rz.uni-sb.de>
- *
- *	This program is free software; you can redistribute it and/or
- *	modify it under the terms of the GNU General Public License
- *	as published by the Free Software Foundation; either version
- *	2 of the License, or (at your option) any later version.
- */
-
-#ifndef _LINUX_SKBUFF_H
-#define _LINUX_SKBUFF_H
-
-#include <linux/kernel.h>
-#include <linux/kmemcheck.h>
-#include <linux/compiler.h>
-#include <linux/time.h>
-#include <linux/bug.h>
-#include <linux/cache.h>
-
-#include <linux/atomic.h>
-#include <asm/types.h>
-#include <linux/spinlock.h>
-#include <linux/net.h>
-#include <linux/textsearch.h>
-#include <net/checksum.h>
-#include <linux/rcupdate.h>
-#include <linux/dmaengine.h>
-#include <linux/hrtimer.h>
-#include <linux/dma-mapping.h>
-#include <linux/netdev_features.h>
-
-/* Don't change this without changing skb_csum_unnecessary! */
-#define CHECKSUM_NONE 0
-#define CHECKSUM_UNNECESSARY 1
-#define CHECKSUM_COMPLETE 2
-#define CHECKSUM_PARTIAL 3
-
-#define SKB_DATA_ALIGN(X)	(((X) + (SMP_CACHE_BYTES - 1)) & \
-				 ~(SMP_CACHE_BYTES - 1))
-#define SKB_WITH_OVERHEAD(X)	\
-	((X) - SKB_DATA_ALIGN(sizeof(struct skb_shared_info)))
-#define SKB_MAX_ORDER(X, ORDER) \
-	SKB_WITH_OVERHEAD((PAGE_SIZE << (ORDER)) - (X))
-#define SKB_MAX_HEAD(X)		(SKB_MAX_ORDER((X), 0))
-#define SKB_MAX_ALLOC		(SKB_MAX_ORDER(0, 2))
-
-/* return minimum truesize of one skb containing X bytes of data */
-#define SKB_TRUESIZE(X) ((X) +						\
-			 SKB_DATA_ALIGN(sizeof(struct sk_buff)) +	\
-			 SKB_DATA_ALIGN(sizeof(struct skb_shared_info)))
-
-/* A. Checksumming of received packets by device.
- *
- *	NONE: device failed to checksum this packet.
- *		skb->csum is undefined.
- *
- *	UNNECESSARY: device parsed packet and wouldbe verified checksum.
- *		skb->csum is undefined.
- *	      It is bad option, but, unfortunately, many of vendors do this.
- *	      Apparently with secret goal to sell you new device, when you
- *	      will add new protocol to your host. F.e. IPv6. 8)
- *
- *	COMPLETE: the most generic way. Device supplied checksum of _all_
- *	    the packet as seen by netif_rx in skb->csum.
- *	    NOTE: Even if device supports only some protocols, but
- *	    is able to produce some skb->csum, it MUST use COMPLETE,
- *	    not UNNECESSARY.
- *
- *	PARTIAL: identical to the case for output below.  This may occur
- *	    on a packet received directly from another Linux OS, e.g.,
- *	    a virtualised Linux kernel on the same host.  The packet can
- *	    be treated in the same way as UNNECESSARY except that on
- *	    output (i.e., forwarding) the checksum must be filled in
- *	    by the OS or the hardware.
- *
- * B. Checksumming on output.
- *
- *	NONE: skb is checksummed by protocol or csum is not required.
- *
- *	PARTIAL: device is required to csum packet as seen by hard_start_xmit
- *	from skb->csum_start to the end and to record the checksum
- *	at skb->csum_start + skb->csum_offset.
- *
- *	Device must show its capabilities in dev->features, set
- *	at device setup time.
- *	NETIF_F_HW_CSUM	- it is clever device, it is able to checksum
- *			  everything.
- *	NETIF_F_IP_CSUM - device is dumb. It is able to csum only
- *			  TCP/UDP over IPv4. Sigh. Vendors like this
- *			  way by an unknown reason. Though, see comment above
- *			  about CHECKSUM_UNNECESSARY. 8)
- *	NETIF_F_IPV6_CSUM about as dumb as the last one but does IPv6 instead.
- *
- *	UNNECESSARY: device will do per protocol specific csum. Protocol drivers
- *	that do not want net to perform the checksum calculation should use
- *	this flag in their outgoing skbs.
- *	NETIF_F_FCOE_CRC  this indicates the device can do FCoE FC CRC
- *			  offload. Correspondingly, the FCoE protocol driver
- *			  stack should use CHECKSUM_UNNECESSARY.
- *
- *	Any questions? No questions, good. 		--ANK
- */
-
-struct net_device;
-struct scatterlist;
-struct pipe_inode_info;
-
-#if defined(CONFIG_NF_CONNTRACK) || defined(CONFIG_NF_CONNTRACK_MODULE)
-struct nf_conntrack {
-	atomic_t use;
-};
-#endif
-
-#ifdef CONFIG_BRIDGE_NETFILTER
-struct nf_bridge_info {
-	atomic_t use;
-	struct net_device *physindev;
-	struct net_device *physoutdev;
-	unsigned int mask;
-	unsigned long data[32 / sizeof(unsigned long)];
-};
-#endif
-
-struct sk_buff_head {
-	/* These two members must be first. */
-	struct sk_buff	*next;
-	struct sk_buff	*prev;
-
-	__u32		qlen;
-	spinlock_t	lock;
-};
-
-struct sk_buff;
-
-/* To allow 64K frame to be packed as single skb without frag_list we
- * require 64K/PAGE_SIZE pages plus 1 additional page to allow for
- * buffers which do not start on a page boundary.
- *
- * Since GRO uses frags we allocate at least 16 regardless of page
- * size.
- */
-#if (65536/PAGE_SIZE + 1) < 16
-#define MAX_SKB_FRAGS 16UL
-#else
-#define MAX_SKB_FRAGS (65536/PAGE_SIZE + 1)
-#endif
-
-typedef struct skb_frag_struct skb_frag_t;
-
-struct skb_frag_struct {
-	struct {
-		struct page *p;
-	} page;
-#if (BITS_PER_LONG > 32) || (PAGE_SIZE >= 65536)
-	__u32 page_offset;
-	__u32 size;
-#else
-	__u16 page_offset;
-	__u16 size;
-#endif
-};
-
-static inline unsigned int skb_frag_size(const skb_frag_t *frag)
-{
-	return frag->size;
-}
-
-static inline void skb_frag_size_set(skb_frag_t *frag, unsigned int size)
-{
-	frag->size = size;
-}
-
-static inline void skb_frag_size_add(skb_frag_t *frag, int delta)
-{
-	frag->size += delta;
-}
-
-static inline void skb_frag_size_sub(skb_frag_t *frag, int delta)
-{
-	frag->size -= delta;
-}
-
-#define HAVE_HW_TIME_STAMP
-
-/**
- * struct skb_shared_hwtstamps - hardware time stamps
- * @hwtstamp:	hardware time stamp transformed into duration
- *		since arbitrary point in time
- * @syststamp:	hwtstamp transformed to system time base
- *
- * Software time stamps generated by ktime_get_real() are stored in
- * skb->tstamp. The relation between the different kinds of time
- * stamps is as follows:
- *
- * syststamp and tstamp can be compared against each other in
- * arbitrary combinations.  The accuracy of a
- * syststamp/tstamp/"syststamp from other device" comparison is
- * limited by the accuracy of the transformation into system time
- * base. This depends on the device driver and its underlying
- * hardware.
- *
- * hwtstamps can only be compared against other hwtstamps from
- * the same device.
- *
- * This structure is attached to packets as part of the
- * &skb_shared_info. Use skb_hwtstamps() to get a pointer.
- */
-struct skb_shared_hwtstamps {
-	ktime_t	hwtstamp;
-	ktime_t	syststamp;
-};
-
-/* Definitions for tx_flags in struct skb_shared_info */
-enum {
-	/* generate hardware time stamp */
-	SKBTX_HW_TSTAMP = 1 << 0,
-
-	/* generate software time stamp */
-	SKBTX_SW_TSTAMP = 1 << 1,
-
-	/* device driver is going to provide hardware time stamp */
-	SKBTX_IN_PROGRESS = 1 << 2,
-
-	/* device driver supports TX zero-copy buffers */
-	SKBTX_DEV_ZEROCOPY = 1 << 3,
-
-	/* generate wifi status information (where possible) */
-	SKBTX_WIFI_STATUS = 1 << 4,
-};
-
-/*
- * The callback notifies userspace to release buffers when skb DMA is done in
- * lower device, the skb last reference should be 0 when calling this.
- * The ctx field is used to track device context.
- * The desc field is used to track userspace buffer index.
- */
-struct ubuf_info {
-	void (*callback)(struct ubuf_info *);
-	void *ctx;
-	unsigned long desc;
-};
-
-/* This data is invariant across clones and lives at
- * the end of the header data, ie. at skb->end.
- */
-struct skb_shared_info {
-	unsigned char	nr_frags;
-	__u8		tx_flags;
-	unsigned short	gso_size;
-	/* Warning: this field is not always filled in (UFO)! */
-	unsigned short	gso_segs;
-	unsigned short  gso_type;
-	struct sk_buff	*frag_list;
-	struct skb_shared_hwtstamps hwtstamps;
-	__be32          ip6_frag_id;
-
-	/*
-	 * Warning : all fields before dataref are cleared in __alloc_skb()
-	 */
-	atomic_t	dataref;
-
-	/* Intermediate layers must ensure that destructor_arg
-	 * remains valid until skb destructor */
-	void *		destructor_arg;
-
-	/* must be last field, see pskb_expand_head() */
-	skb_frag_t	frags[MAX_SKB_FRAGS];
-};
-
-/* We divide dataref into two halves.  The higher 16 bits hold references
- * to the payload part of skb->data.  The lower 16 bits hold references to
- * the entire skb->data.  A clone of a headerless skb holds the length of
- * the header in skb->hdr_len.
- *
- * All users must obey the rule that the skb->data reference count must be
- * greater than or equal to the payload reference count.
- *
- * Holding a reference to the payload part means that the user does not
- * care about modifications to the header part of skb->data.
- */
-#define SKB_DATAREF_SHIFT 16
-#define SKB_DATAREF_MASK ((1 << SKB_DATAREF_SHIFT) - 1)
-
-
-enum {
-	SKB_FCLONE_UNAVAILABLE,
-	SKB_FCLONE_ORIG,
-	SKB_FCLONE_CLONE,
-};
-
-enum {
-	SKB_GSO_TCPV4 = 1 << 0,
-	SKB_GSO_UDP = 1 << 1,
-
-	/* This indicates the skb is from an untrusted source. */
-	SKB_GSO_DODGY = 1 << 2,
-
-	/* This indicates the tcp segment has CWR set. */
-	SKB_GSO_TCP_ECN = 1 << 3,
-
-	SKB_GSO_TCPV6 = 1 << 4,
-
-	SKB_GSO_FCOE = 1 << 5,
-};
-
-#if BITS_PER_LONG > 32
-#define NET_SKBUFF_DATA_USES_OFFSET 1
-#endif
-
-#ifdef NET_SKBUFF_DATA_USES_OFFSET
-typedef unsigned int sk_buff_data_t;
-#else
-typedef unsigned char *sk_buff_data_t;
-#endif
-
-#if defined(CONFIG_NF_DEFRAG_IPV4) || defined(CONFIG_NF_DEFRAG_IPV4_MODULE) || \
-    defined(CONFIG_NF_DEFRAG_IPV6) || defined(CONFIG_NF_DEFRAG_IPV6_MODULE)
-#define NET_SKBUFF_NF_DEFRAG_NEEDED 1
-#endif
-
-/** 
- *	struct sk_buff - socket buffer
- *	@next: Next buffer in list
- *	@prev: Previous buffer in list
- *	@tstamp: Time we arrived
- *	@sk: Socket we are owned by
- *	@dev: Device we arrived on/are leaving by
- *	@cb: Control buffer. Free for use by every layer. Put private vars here
- *	@_skb_refdst: destination entry (with norefcount bit)
- *	@sp: the security path, used for xfrm
- *	@len: Length of actual data
- *	@data_len: Data length
- *	@mac_len: Length of link layer header
- *	@hdr_len: writable header length of cloned skb
- *	@csum: Checksum (must include start/offset pair)
- *	@csum_start: Offset from skb->head where checksumming should start
- *	@csum_offset: Offset from csum_start where checksum should be stored
- *	@priority: Packet queueing priority
- *	@local_df: allow local fragmentation
- *	@cloned: Head may be cloned (check refcnt to be sure)
- *	@ip_summed: Driver fed us an IP checksum
- *	@nohdr: Payload reference only, must not modify header
- *	@nfctinfo: Relationship of this skb to the connection
- *	@pkt_type: Packet class
- *	@fclone: skbuff clone status
- *	@ipvs_property: skbuff is owned by ipvs
- *	@peeked: this packet has been seen already, so stats have been
- *		done for it, don't do them again
- *	@nf_trace: netfilter packet trace flag
- *	@protocol: Packet protocol from driver
- *	@destructor: Destruct function
- *	@nfct: Associated connection, if any
- *	@nfct_reasm: netfilter conntrack re-assembly pointer
- *	@nf_bridge: Saved data about a bridged frame - see br_netfilter.c
- *	@skb_iif: ifindex of device we arrived on
- *	@tc_index: Traffic control index
- *	@tc_verd: traffic control verdict
- *	@rxhash: the packet hash computed on receive
- *	@queue_mapping: Queue mapping for multiqueue devices
- *	@ndisc_nodetype: router type (from link layer)
- *	@ooo_okay: allow the mapping of a socket to a queue to be changed
- *	@l4_rxhash: indicate rxhash is a canonical 4-tuple hash over transport
- *		ports.
- *	@wifi_acked_valid: wifi_acked was set
- *	@wifi_acked: whether frame was acked on wifi or not
- *	@no_fcs:  Request NIC to treat last 4 bytes as Ethernet FCS
- *	@dma_cookie: a cookie to one of several possible DMA operations
- *		done by skb DMA functions
- *	@secmark: security marking
- *	@mark: Generic packet mark
- *	@dropcount: total number of sk_receive_queue overflows
- *	@vlan_tci: vlan tag control information
- *	@transport_header: Transport layer header
- *	@network_header: Network layer header
- *	@mac_header: Link layer header
- *	@tail: Tail pointer
- *	@end: End pointer
- *	@head: Head of buffer
- *	@data: Data head pointer
- *	@truesize: Buffer size
- *	@users: User count - see {datagram,tcp}.c
- */
-
-struct sk_buff {
-	/* These two members must be first. */
-	struct sk_buff		*next;
-	struct sk_buff		*prev;
-
-	ktime_t			tstamp;
-
-	struct sock		*sk;
-	struct net_device	*dev;
-
-	/*
-	 * This is the control buffer. It is free to use for every
-	 * layer. Please put your private variables there. If you
-	 * want to keep them across layers you have to do a skb_clone()
-	 * first. This is owned by whoever has the skb queued ATM.
-	 */
-	char			cb[48] __aligned(8);
-
-	unsigned long		_skb_refdst;
-#ifdef CONFIG_XFRM
-	struct	sec_path	*sp;
-#endif
-	unsigned int		len,
-				data_len;
-	__u16			mac_len,
-				hdr_len;
-	union {
-		__wsum		csum;
-		struct {
-			__u16	csum_start;
-			__u16	csum_offset;
-		};
-	};
-	__u32			priority;
-	kmemcheck_bitfield_begin(flags1);
-	__u8			local_df:1,
-				cloned:1,
-				ip_summed:2,
-				nohdr:1,
-				nfctinfo:3;
-	__u8			pkt_type:3,
-				fclone:2,
-				ipvs_property:1,
-				peeked:1,
-				nf_trace:1;
-	kmemcheck_bitfield_end(flags1);
-	__be16			protocol;
-
-	void			(*destructor)(struct sk_buff *skb);
-#if defined(CONFIG_NF_CONNTRACK) || defined(CONFIG_NF_CONNTRACK_MODULE)
-	struct nf_conntrack	*nfct;
-#endif
-#ifdef NET_SKBUFF_NF_DEFRAG_NEEDED
-	struct sk_buff		*nfct_reasm;
-#endif
-#ifdef CONFIG_BRIDGE_NETFILTER
-	struct nf_bridge_info	*nf_bridge;
-#endif
-
-	int			skb_iif;
-
-	__u32			rxhash;
-
-	__u16			vlan_tci;
-
-#ifdef CONFIG_NET_SCHED
-	__u16			tc_index;	/* traffic control index */
-#ifdef CONFIG_NET_CLS_ACT
-	__u16			tc_verd;	/* traffic control verdict */
-#endif
-#endif
-
-	__u16			queue_mapping;
-	kmemcheck_bitfield_begin(flags2);
-#ifdef CONFIG_IPV6_NDISC_NODETYPE
-	__u8			ndisc_nodetype:2;
-#endif
-	__u8			ooo_okay:1;
-	__u8			l4_rxhash:1;
-	__u8			wifi_acked_valid:1;
-	__u8			wifi_acked:1;
-	__u8			no_fcs:1;
-	/* 9/11 bit hole (depending on ndisc_nodetype presence) */
-	kmemcheck_bitfield_end(flags2);
-
-#ifdef CONFIG_NET_DMA
-	dma_cookie_t		dma_cookie;
-#endif
-#ifdef CONFIG_NETWORK_SECMARK
-	__u32			secmark;
-#endif
-	union {
-		__u32		mark;
-		__u32		dropcount;
-		__u32		avail_size;
-	};
-
-	sk_buff_data_t		transport_header;
-	sk_buff_data_t		network_header;
-	sk_buff_data_t		mac_header;
-	/* These elements must be at the end, see alloc_skb() for details.  */
-	sk_buff_data_t		tail;
-	sk_buff_data_t		end;
-	unsigned char		*head,
-				*data;
-	unsigned int		truesize;
-	atomic_t		users;
-};
-
-#ifdef __KERNEL__
-/*
- *	Handling routines are only of interest to the kernel
- */
-#include <linux/slab.h>
-
-
-/*
- * skb might have a dst pointer attached, refcounted or not.
- * _skb_refdst low order bit is set if refcount was _not_ taken
- */
-#define SKB_DST_NOREF	1UL
-#define SKB_DST_PTRMASK	~(SKB_DST_NOREF)
-
-/**
- * skb_dst - returns skb dst_entry
- * @skb: buffer
- *
- * Returns skb dst_entry, regardless of reference taken or not.
- */
-static inline struct dst_entry *skb_dst(const struct sk_buff *skb)
-{
-	/* If refdst was not refcounted, check we still are in a 
-	 * rcu_read_lock section
-	 */
-	WARN_ON((skb->_skb_refdst & SKB_DST_NOREF) &&
-		!rcu_read_lock_held() &&
-		!rcu_read_lock_bh_held());
-	return (struct dst_entry *)(skb->_skb_refdst & SKB_DST_PTRMASK);
-}
-
-/**
- * skb_dst_set - sets skb dst
- * @skb: buffer
- * @dst: dst entry
- *
- * Sets skb dst, assuming a reference was taken on dst and should
- * be released by skb_dst_drop()
- */
-static inline void skb_dst_set(struct sk_buff *skb, struct dst_entry *dst)
-{
-	skb->_skb_refdst = (unsigned long)dst;
-}
-
-extern void skb_dst_set_noref(struct sk_buff *skb, struct dst_entry *dst);
-
-/**
- * skb_dst_is_noref - Test if skb dst isn't refcounted
- * @skb: buffer
- */
-static inline bool skb_dst_is_noref(const struct sk_buff *skb)
-{
-	return (skb->_skb_refdst & SKB_DST_NOREF) && skb_dst(skb);
-}
-
-static inline struct rtable *skb_rtable(const struct sk_buff *skb)
-{
-	return (struct rtable *)skb_dst(skb);
-}
-
-extern void kfree_skb(struct sk_buff *skb);
-extern void consume_skb(struct sk_buff *skb);
-extern void	       __kfree_skb(struct sk_buff *skb);
-extern struct sk_buff *__alloc_skb(unsigned int size,
-				   gfp_t priority, int fclone, int node);
-extern struct sk_buff *build_skb(void *data);
-static inline struct sk_buff *alloc_skb(unsigned int size,
-					gfp_t priority)
-{
-	return __alloc_skb(size, priority, 0, NUMA_NO_NODE);
-}
-
-static inline struct sk_buff *alloc_skb_fclone(unsigned int size,
-					       gfp_t priority)
-{
-	return __alloc_skb(size, priority, 1, NUMA_NO_NODE);
-}
-
-extern void skb_recycle(struct sk_buff *skb);
-extern bool skb_recycle_check(struct sk_buff *skb, int skb_size);
-
-extern struct sk_buff *skb_morph(struct sk_buff *dst, struct sk_buff *src);
-extern int skb_copy_ubufs(struct sk_buff *skb, gfp_t gfp_mask);
-extern struct sk_buff *skb_clone(struct sk_buff *skb,
-				 gfp_t priority);
-extern struct sk_buff *skb_copy(const struct sk_buff *skb,
-				gfp_t priority);
-extern struct sk_buff *__pskb_copy(struct sk_buff *skb,
-				 int headroom, gfp_t gfp_mask);
-
-extern int	       pskb_expand_head(struct sk_buff *skb,
-					int nhead, int ntail,
-					gfp_t gfp_mask);
-extern struct sk_buff *skb_realloc_headroom(struct sk_buff *skb,
-					    unsigned int headroom);
-extern struct sk_buff *skb_copy_expand(const struct sk_buff *skb,
-				       int newheadroom, int newtailroom,
-				       gfp_t priority);
-extern int	       skb_to_sgvec(struct sk_buff *skb,
-				    struct scatterlist *sg, int offset,
-				    int len);
-extern int	       skb_cow_data(struct sk_buff *skb, int tailbits,
-				    struct sk_buff **trailer);
-extern int	       skb_pad(struct sk_buff *skb, int pad);
-#define dev_kfree_skb(a)	consume_skb(a)
-
-extern int skb_append_datato_frags(struct sock *sk, struct sk_buff *skb,
-			int getfrag(void *from, char *to, int offset,
-			int len,int odd, struct sk_buff *skb),
-			void *from, int length);
-
-struct skb_seq_state {
-	__u32		lower_offset;
-	__u32		upper_offset;
-	__u32		frag_idx;
-	__u32		stepped_offset;
-	struct sk_buff	*root_skb;
-	struct sk_buff	*cur_skb;
-	__u8		*frag_data;
-};
-
-extern void	      skb_prepare_seq_read(struct sk_buff *skb,
-					   unsigned int from, unsigned int to,
-					   struct skb_seq_state *st);
-extern unsigned int   skb_seq_read(unsigned int consumed, const u8 **data,
-				   struct skb_seq_state *st);
-extern void	      skb_abort_seq_read(struct skb_seq_state *st);
-
-extern unsigned int   skb_find_text(struct sk_buff *skb, unsigned int from,
-				    unsigned int to, struct ts_config *config,
-				    struct ts_state *state);
-
-extern void __skb_get_rxhash(struct sk_buff *skb);
-static inline __u32 skb_get_rxhash(struct sk_buff *skb)
-{
-	if (!skb->rxhash)
-		__skb_get_rxhash(skb);
-
-	return skb->rxhash;
-}
-
-#ifdef NET_SKBUFF_DATA_USES_OFFSET
-static inline unsigned char *skb_end_pointer(const struct sk_buff *skb)
-{
-	return skb->head + skb->end;
-}
-#else
-static inline unsigned char *skb_end_pointer(const struct sk_buff *skb)
-{
-	return skb->end;
-}
-#endif
-
-/* Internal */
-#define skb_shinfo(SKB)	((struct skb_shared_info *)(skb_end_pointer(SKB)))
-
-static inline struct skb_shared_hwtstamps *skb_hwtstamps(struct sk_buff *skb)
-{
-	return &skb_shinfo(skb)->hwtstamps;
-}
-
-/**
- *	skb_queue_empty - check if a queue is empty
- *	@list: queue head
- *
- *	Returns true if the queue is empty, false otherwise.
- */
-static inline int skb_queue_empty(const struct sk_buff_head *list)
-{
-	return list->next == (struct sk_buff *)list;
-}
-
-/**
- *	skb_queue_is_last - check if skb is the last entry in the queue
- *	@list: queue head
- *	@skb: buffer
- *
- *	Returns true if @skb is the last buffer on the list.
- */
-static inline bool skb_queue_is_last(const struct sk_buff_head *list,
-				     const struct sk_buff *skb)
-{
-	return skb->next == (struct sk_buff *)list;
-}
-
-/**
- *	skb_queue_is_first - check if skb is the first entry in the queue
- *	@list: queue head
- *	@skb: buffer
- *
- *	Returns true if @skb is the first buffer on the list.
- */
-static inline bool skb_queue_is_first(const struct sk_buff_head *list,
-				      const struct sk_buff *skb)
-{
-	return skb->prev == (struct sk_buff *)list;
-}
-
-/**
- *	skb_queue_next - return the next packet in the queue
- *	@list: queue head
- *	@skb: current buffer
- *
- *	Return the next packet in @list after @skb.  It is only valid to
- *	call this if skb_queue_is_last() evaluates to false.
- */
-static inline struct sk_buff *skb_queue_next(const struct sk_buff_head *list,
-					     const struct sk_buff *skb)
-{
-	/* This BUG_ON may seem severe, but if we just return then we
-	 * are going to dereference garbage.
-	 */
-	BUG_ON(skb_queue_is_last(list, skb));
-	return skb->next;
-}
-
-/**
- *	skb_queue_prev - return the prev packet in the queue
- *	@list: queue head
- *	@skb: current buffer
- *
- *	Return the prev packet in @list before @skb.  It is only valid to
- *	call this if skb_queue_is_first() evaluates to false.
- */
-static inline struct sk_buff *skb_queue_prev(const struct sk_buff_head *list,
-					     const struct sk_buff *skb)
-{
-	/* This BUG_ON may seem severe, but if we just return then we
-	 * are going to dereference garbage.
-	 */
-	BUG_ON(skb_queue_is_first(list, skb));
-	return skb->prev;
-}
-
-/**
- *	skb_get - reference buffer
- *	@skb: buffer to reference
- *
- *	Makes another reference to a socket buffer and returns a pointer
- *	to the buffer.
- */
-static inline struct sk_buff *skb_get(struct sk_buff *skb)
-{
-	atomic_inc(&skb->users);
-	return skb;
-}
-
-/*
- * If users == 1, we are the only owner and are can avoid redundant
- * atomic change.
- */
-
-/**
- *	skb_cloned - is the buffer a clone
- *	@skb: buffer to check
- *
- *	Returns true if the buffer was generated with skb_clone() and is
- *	one of multiple shared copies of the buffer. Cloned buffers are
- *	shared data so must not be written to under normal circumstances.
- */
-static inline int skb_cloned(const struct sk_buff *skb)
-{
-	return skb->cloned &&
-	       (atomic_read(&skb_shinfo(skb)->dataref) & SKB_DATAREF_MASK) != 1;
-}
-
-/**
- *	skb_header_cloned - is the header a clone
- *	@skb: buffer to check
- *
- *	Returns true if modifying the header part of the buffer requires
- *	the data to be copied.
- */
-static inline int skb_header_cloned(const struct sk_buff *skb)
-{
-	int dataref;
-
-	if (!skb->cloned)
-		return 0;
-
-	dataref = atomic_read(&skb_shinfo(skb)->dataref);
-	dataref = (dataref & SKB_DATAREF_MASK) - (dataref >> SKB_DATAREF_SHIFT);
-	return dataref != 1;
-}
-
-/**
- *	skb_header_release - release reference to header
- *	@skb: buffer to operate on
- *
- *	Drop a reference to the header part of the buffer.  This is done
- *	by acquiring a payload reference.  You must not read from the header
- *	part of skb->data after this.
- */
-static inline void skb_header_release(struct sk_buff *skb)
-{
-	BUG_ON(skb->nohdr);
-	skb->nohdr = 1;
-	atomic_add(1 << SKB_DATAREF_SHIFT, &skb_shinfo(skb)->dataref);
-}
-
-/**
- *	skb_shared - is the buffer shared
- *	@skb: buffer to check
- *
- *	Returns true if more than one person has a reference to this
- *	buffer.
- */
-static inline int skb_shared(const struct sk_buff *skb)
-{
-	return atomic_read(&skb->users) != 1;
-}
-
-/**
- *	skb_share_check - check if buffer is shared and if so clone it
- *	@skb: buffer to check
- *	@pri: priority for memory allocation
- *
- *	If the buffer is shared the buffer is cloned and the old copy
- *	drops a reference. A new clone with a single reference is returned.
- *	If the buffer is not shared the original buffer is returned. When
- *	being called from interrupt status or with spinlocks held pri must
- *	be GFP_ATOMIC.
- *
- *	NULL is returned on a memory allocation failure.
- */
-static inline struct sk_buff *skb_share_check(struct sk_buff *skb,
-					      gfp_t pri)
-{
-	might_sleep_if(pri & __GFP_WAIT);
-	if (skb_shared(skb)) {
-		struct sk_buff *nskb = skb_clone(skb, pri);
-		kfree_skb(skb);
-		skb = nskb;
-	}
-	return skb;
-}
-
-/*
- *	Copy shared buffers into a new sk_buff. We effectively do COW on
- *	packets to handle cases where we have a local reader and forward
- *	and a couple of other messy ones. The normal one is tcpdumping
- *	a packet thats being forwarded.
- */
-
-/**
- *	skb_unshare - make a copy of a shared buffer
- *	@skb: buffer to check
- *	@pri: priority for memory allocation
- *
- *	If the socket buffer is a clone then this function creates a new
- *	copy of the data, drops a reference count on the old copy and returns
- *	the new copy with the reference count at 1. If the buffer is not a clone
- *	the original buffer is returned. When called with a spinlock held or
- *	from interrupt state @pri must be %GFP_ATOMIC
- *
- *	%NULL is returned on a memory allocation failure.
- */
-static inline struct sk_buff *skb_unshare(struct sk_buff *skb,
-					  gfp_t pri)
-{
-	might_sleep_if(pri & __GFP_WAIT);
-	if (skb_cloned(skb)) {
-		struct sk_buff *nskb = skb_copy(skb, pri);
-		kfree_skb(skb);	/* Free our shared copy */
-		skb = nskb;
-	}
-	return skb;
-}
-
-/**
- *	skb_peek - peek at the head of an &sk_buff_head
- *	@list_: list to peek at
- *
- *	Peek an &sk_buff. Unlike most other operations you _MUST_
- *	be careful with this one. A peek leaves the buffer on the
- *	list and someone else may run off with it. You must hold
- *	the appropriate locks or have a private queue to do this.
- *
- *	Returns %NULL for an empty list or a pointer to the head element.
- *	The reference count is not incremented and the reference is therefore
- *	volatile. Use with caution.
- */
-static inline struct sk_buff *skb_peek(const struct sk_buff_head *list_)
-{
-	struct sk_buff *list = ((const struct sk_buff *)list_)->next;
-	if (list == (struct sk_buff *)list_)
-		list = NULL;
-	return list;
-}
-
-/**
- *	skb_peek_next - peek skb following the given one from a queue
- *	@skb: skb to start from
- *	@list_: list to peek at
- *
- *	Returns %NULL when the end of the list is met or a pointer to the
- *	next element. The reference count is not incremented and the
- *	reference is therefore volatile. Use with caution.
- */
-static inline struct sk_buff *skb_peek_next(struct sk_buff *skb,
-		const struct sk_buff_head *list_)
-{
-	struct sk_buff *next = skb->next;
-	if (next == (struct sk_buff *)list_)
-		next = NULL;
-	return next;
-}
-
-/**
- *	skb_peek_tail - peek at the tail of an &sk_buff_head
- *	@list_: list to peek at
- *
- *	Peek an &sk_buff. Unlike most other operations you _MUST_
- *	be careful with this one. A peek leaves the buffer on the
- *	list and someone else may run off with it. You must hold
- *	the appropriate locks or have a private queue to do this.
- *
- *	Returns %NULL for an empty list or a pointer to the tail element.
- *	The reference count is not incremented and the reference is therefore
- *	volatile. Use with caution.
- */
-static inline struct sk_buff *skb_peek_tail(const struct sk_buff_head *list_)
-{
-	struct sk_buff *list = ((const struct sk_buff *)list_)->prev;
-	if (list == (struct sk_buff *)list_)
-		list = NULL;
-	return list;
-}
-
-/**
- *	skb_queue_len	- get queue length
- *	@list_: list to measure
- *
- *	Return the length of an &sk_buff queue.
- */
-static inline __u32 skb_queue_len(const struct sk_buff_head *list_)
-{
-	return list_->qlen;
-}
-
-/**
- *	__skb_queue_head_init - initialize non-spinlock portions of sk_buff_head
- *	@list: queue to initialize
- *
- *	This initializes only the list and queue length aspects of
- *	an sk_buff_head object.  This allows to initialize the list
- *	aspects of an sk_buff_head without reinitializing things like
- *	the spinlock.  It can also be used for on-stack sk_buff_head
- *	objects where the spinlock is known to not be used.
- */
-static inline void __skb_queue_head_init(struct sk_buff_head *list)
-{
-	list->prev = list->next = (struct sk_buff *)list;
-	list->qlen = 0;
-}
-
-/*
- * This function creates a split out lock class for each invocation;
- * this is needed for now since a whole lot of users of the skb-queue
- * infrastructure in drivers have different locking usage (in hardirq)
- * than the networking core (in softirq only). In the long run either the
- * network layer or drivers should need annotation to consolidate the
- * main types of usage into 3 classes.
- */
-static inline void skb_queue_head_init(struct sk_buff_head *list)
-{
-	spin_lock_init(&list->lock);
-	__skb_queue_head_init(list);
-}
-
-static inline void skb_queue_head_init_class(struct sk_buff_head *list,
-		struct lock_class_key *class)
-{
-	skb_queue_head_init(list);
-	lockdep_set_class(&list->lock, class);
-}
-
-/*
- *	Insert an sk_buff on a list.
- *
- *	The "__skb_xxxx()" functions are the non-atomic ones that
- *	can only be called with interrupts disabled.
- */
-extern void        skb_insert(struct sk_buff *old, struct sk_buff *newsk, struct sk_buff_head *list);
-static inline void __skb_insert(struct sk_buff *newsk,
-				struct sk_buff *prev, struct sk_buff *next,
-				struct sk_buff_head *list)
-{
-	newsk->next = next;
-	newsk->prev = prev;
-	next->prev  = prev->next = newsk;
-	list->qlen++;
-}
-
-static inline void __skb_queue_splice(const struct sk_buff_head *list,
-				      struct sk_buff *prev,
-				      struct sk_buff *next)
-{
-	struct sk_buff *first = list->next;
-	struct sk_buff *last = list->prev;
-
-	first->prev = prev;
-	prev->next = first;
-
-	last->next = next;
-	next->prev = last;
-}
-
-/**
- *	skb_queue_splice - join two skb lists, this is designed for stacks
- *	@list: the new list to add
- *	@head: the place to add it in the first list
- */
-static inline void skb_queue_splice(const struct sk_buff_head *list,
-				    struct sk_buff_head *head)
-{
-	if (!skb_queue_empty(list)) {
-		__skb_queue_splice(list, (struct sk_buff *) head, head->next);
-		head->qlen += list->qlen;
-	}
-}
-
-/**
- *	skb_queue_splice_init - join two skb lists and reinitialise the emptied list
- *	@list: the new list to add
- *	@head: the place to add it in the first list
- *
- *	The list at @list is reinitialised
- */
-static inline void skb_queue_splice_init(struct sk_buff_head *list,
-					 struct sk_buff_head *head)
-{
-	if (!skb_queue_empty(list)) {
-		__skb_queue_splice(list, (struct sk_buff *) head, head->next);
-		head->qlen += list->qlen;
-		__skb_queue_head_init(list);
-	}
-}
-
-/**
- *	skb_queue_splice_tail - join two skb lists, each list being a queue
- *	@list: the new list to add
- *	@head: the place to add it in the first list
- */
-static inline void skb_queue_splice_tail(const struct sk_buff_head *list,
-					 struct sk_buff_head *head)
-{
-	if (!skb_queue_empty(list)) {
-		__skb_queue_splice(list, head->prev, (struct sk_buff *) head);
-		head->qlen += list->qlen;
-	}
-}
-
-/**
- *	skb_queue_splice_tail_init - join two skb lists and reinitialise the emptied list
- *	@list: the new list to add
- *	@head: the place to add it in the first list
- *
- *	Each of the lists is a queue.
- *	The list at @list is reinitialised
- */
-static inline void skb_queue_splice_tail_init(struct sk_buff_head *list,
-					      struct sk_buff_head *head)
-{
-	if (!skb_queue_empty(list)) {
-		__skb_queue_splice(list, head->prev, (struct sk_buff *) head);
-		head->qlen += list->qlen;
-		__skb_queue_head_init(list);
-	}
-}
-
-/**
- *	__skb_queue_after - queue a buffer at the list head
- *	@list: list to use
- *	@prev: place after this buffer
- *	@newsk: buffer to queue
- *
- *	Queue a buffer int the middle of a list. This function takes no locks
- *	and you must therefore hold required locks before calling it.
- *
- *	A buffer cannot be placed on two lists at the same time.
- */
-static inline void __skb_queue_after(struct sk_buff_head *list,
-				     struct sk_buff *prev,
-				     struct sk_buff *newsk)
-{
-	__skb_insert(newsk, prev, prev->next, list);
-}
-
-extern void skb_append(struct sk_buff *old, struct sk_buff *newsk,
-		       struct sk_buff_head *list);
-
-static inline void __skb_queue_before(struct sk_buff_head *list,
-				      struct sk_buff *next,
-				      struct sk_buff *newsk)
-{
-	__skb_insert(newsk, next->prev, next, list);
-}
-
-/**
- *	__skb_queue_head - queue a buffer at the list head
- *	@list: list to use
- *	@newsk: buffer to queue
- *
- *	Queue a buffer at the start of a list. This function takes no locks
- *	and you must therefore hold required locks before calling it.
- *
- *	A buffer cannot be placed on two lists at the same time.
- */
-extern void skb_queue_head(struct sk_buff_head *list, struct sk_buff *newsk);
-static inline void __skb_queue_head(struct sk_buff_head *list,
-				    struct sk_buff *newsk)
-{
-	__skb_queue_after(list, (struct sk_buff *)list, newsk);
-}
-
-/**
- *	__skb_queue_tail - queue a buffer at the list tail
- *	@list: list to use
- *	@newsk: buffer to queue
- *
- *	Queue a buffer at the end of a list. This function takes no locks
- *	and you must therefore hold required locks before calling it.
- *
- *	A buffer cannot be placed on two lists at the same time.
- */
-extern void skb_queue_tail(struct sk_buff_head *list, struct sk_buff *newsk);
-static inline void __skb_queue_tail(struct sk_buff_head *list,
-				   struct sk_buff *newsk)
-{
-	__skb_queue_before(list, (struct sk_buff *)list, newsk);
-}
-
-/*
- * remove sk_buff from list. _Must_ be called atomically, and with
- * the list known..
- */
-extern void	   skb_unlink(struct sk_buff *skb, struct sk_buff_head *list);
-static inline void __skb_unlink(struct sk_buff *skb, struct sk_buff_head *list)
-{
-	struct sk_buff *next, *prev;
-
-	list->qlen--;
-	next	   = skb->next;
-	prev	   = skb->prev;
-	skb->next  = skb->prev = NULL;
-	next->prev = prev;
-	prev->next = next;
-}
-
-/**
- *	__skb_dequeue - remove from the head of the queue
- *	@list: list to dequeue from
- *
- *	Remove the head of the list. This function does not take any locks
- *	so must be used with appropriate locks held only. The head item is
- *	returned or %NULL if the list is empty.
- */
-extern struct sk_buff *skb_dequeue(struct sk_buff_head *list);
-static inline struct sk_buff *__skb_dequeue(struct sk_buff_head *list)
-{
-	struct sk_buff *skb = skb_peek(list);
-	if (skb)
-		__skb_unlink(skb, list);
-	return skb;
-}
-
-/**
- *	__skb_dequeue_tail - remove from the tail of the queue
- *	@list: list to dequeue from
- *
- *	Remove the tail of the list. This function does not take any locks
- *	so must be used with appropriate locks held only. The tail item is
- *	returned or %NULL if the list is empty.
- */
-extern struct sk_buff *skb_dequeue_tail(struct sk_buff_head *list);
-static inline struct sk_buff *__skb_dequeue_tail(struct sk_buff_head *list)
-{
-	struct sk_buff *skb = skb_peek_tail(list);
-	if (skb)
-		__skb_unlink(skb, list);
-	return skb;
-}
-
-
-static inline bool skb_is_nonlinear(const struct sk_buff *skb)
-{
-	return skb->data_len;
-}
-
-static inline unsigned int skb_headlen(const struct sk_buff *skb)
-{
-	return skb->len - skb->data_len;
-}
-
-static inline int skb_pagelen(const struct sk_buff *skb)
-{
-	int i, len = 0;
-
-	for (i = (int)skb_shinfo(skb)->nr_frags - 1; i >= 0; i--)
-		len += skb_frag_size(&skb_shinfo(skb)->frags[i]);
-	return len + skb_headlen(skb);
-}
-
-/**
- * __skb_fill_page_desc - initialise a paged fragment in an skb
- * @skb: buffer containing fragment to be initialised
- * @i: paged fragment index to initialise
- * @page: the page to use for this fragment
- * @off: the offset to the data with @page
- * @size: the length of the data
- *
- * Initialises the @i'th fragment of @skb to point to &size bytes at
- * offset @off within @page.
- *
- * Does not take any additional reference on the fragment.
- */
-static inline void __skb_fill_page_desc(struct sk_buff *skb, int i,
-					struct page *page, int off, int size)
-{
-	skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
-
-	frag->page.p		  = page;
-	frag->page_offset	  = off;
-	skb_frag_size_set(frag, size);
-}
-
-/**
- * skb_fill_page_desc - initialise a paged fragment in an skb
- * @skb: buffer containing fragment to be initialised
- * @i: paged fragment index to initialise
- * @page: the page to use for this fragment
- * @off: the offset to the data with @page
- * @size: the length of the data
- *
- * As per __skb_fill_page_desc() -- initialises the @i'th fragment of
- * @skb to point to &size bytes at offset @off within @page. In
- * addition updates @skb such that @i is the last fragment.
- *
- * Does not take any additional reference on the fragment.
- */
-static inline void skb_fill_page_desc(struct sk_buff *skb, int i,
-				      struct page *page, int off, int size)
-{
-	__skb_fill_page_desc(skb, i, page, off, size);
-	skb_shinfo(skb)->nr_frags = i + 1;
-}
-
-extern void skb_add_rx_frag(struct sk_buff *skb, int i, struct page *page,
-			    int off, int size, unsigned int truesize);
-
-#define SKB_PAGE_ASSERT(skb) 	BUG_ON(skb_shinfo(skb)->nr_frags)
-#define SKB_FRAG_ASSERT(skb) 	BUG_ON(skb_has_frag_list(skb))
-#define SKB_LINEAR_ASSERT(skb)  BUG_ON(skb_is_nonlinear(skb))
-
-#ifdef NET_SKBUFF_DATA_USES_OFFSET
-static inline unsigned char *skb_tail_pointer(const struct sk_buff *skb)
-{
-	return skb->head + skb->tail;
-}
-
-static inline void skb_reset_tail_pointer(struct sk_buff *skb)
-{
-	skb->tail = skb->data - skb->head;
-}
-
-static inline void skb_set_tail_pointer(struct sk_buff *skb, const int offset)
-{
-	skb_reset_tail_pointer(skb);
-	skb->tail += offset;
-}
-#else /* NET_SKBUFF_DATA_USES_OFFSET */
-static inline unsigned char *skb_tail_pointer(const struct sk_buff *skb)
-{
-	return skb->tail;
-}
-
-static inline void skb_reset_tail_pointer(struct sk_buff *skb)
-{
-	skb->tail = skb->data;
-}
-
-static inline void skb_set_tail_pointer(struct sk_buff *skb, const int offset)
-{
-	skb->tail = skb->data + offset;
-}
-
-#endif /* NET_SKBUFF_DATA_USES_OFFSET */
-
-/*
- *	Add data to an sk_buff
- */
-extern unsigned char *skb_put(struct sk_buff *skb, unsigned int len);
-static inline unsigned char *__skb_put(struct sk_buff *skb, unsigned int len)
-{
-	unsigned char *tmp = skb_tail_pointer(skb);
-	SKB_LINEAR_ASSERT(skb);
-	skb->tail += len;
-	skb->len  += len;
-	return tmp;
-}
-
-extern unsigned char *skb_push(struct sk_buff *skb, unsigned int len);
-static inline unsigned char *__skb_push(struct sk_buff *skb, unsigned int len)
-{
-	skb->data -= len;
-	skb->len  += len;
-	return skb->data;
-}
-
-extern unsigned char *skb_pull(struct sk_buff *skb, unsigned int len);
-static inline unsigned char *__skb_pull(struct sk_buff *skb, unsigned int len)
-{
-	skb->len -= len;
-	BUG_ON(skb->len < skb->data_len);
-	return skb->data += len;
-}
-
-static inline unsigned char *skb_pull_inline(struct sk_buff *skb, unsigned int len)
-{
-	return unlikely(len > skb->len) ? NULL : __skb_pull(skb, len);
-}
-
-extern unsigned char *__pskb_pull_tail(struct sk_buff *skb, int delta);
-
-static inline unsigned char *__pskb_pull(struct sk_buff *skb, unsigned int len)
-{
-	if (len > skb_headlen(skb) &&
-	    !__pskb_pull_tail(skb, len - skb_headlen(skb)))
-		return NULL;
-	skb->len -= len;
-	return skb->data += len;
-}
-
-static inline unsigned char *pskb_pull(struct sk_buff *skb, unsigned int len)
-{
-	return unlikely(len > skb->len) ? NULL : __pskb_pull(skb, len);
-}
-
-static inline int pskb_may_pull(struct sk_buff *skb, unsigned int len)
-{
-	if (likely(len <= skb_headlen(skb)))
-		return 1;
-	if (unlikely(len > skb->len))
-		return 0;
-	return __pskb_pull_tail(skb, len - skb_headlen(skb)) != NULL;
-}
-
-/**
- *	skb_headroom - bytes at buffer head
- *	@skb: buffer to check
- *
- *	Return the number of bytes of free space at the head of an &sk_buff.
- */
-static inline unsigned int skb_headroom(const struct sk_buff *skb)
-{
-	return skb->data - skb->head;
-}
-
-/**
- *	skb_tailroom - bytes at buffer end
- *	@skb: buffer to check
- *
- *	Return the number of bytes of free space at the tail of an sk_buff
- */
-static inline int skb_tailroom(const struct sk_buff *skb)
-{
-	return skb_is_nonlinear(skb) ? 0 : skb->end - skb->tail;
-}
-
-/**
- *	skb_availroom - bytes at buffer end
- *	@skb: buffer to check
- *
- *	Return the number of bytes of free space at the tail of an sk_buff
- *	allocated by sk_stream_alloc()
- */
-static inline int skb_availroom(const struct sk_buff *skb)
-{
-	return skb_is_nonlinear(skb) ? 0 : skb->avail_size - skb->len;
-}
-
-/**
- *	skb_reserve - adjust headroom
- *	@skb: buffer to alter
- *	@len: bytes to move
- *
- *	Increase the headroom of an empty &sk_buff by reducing the tail
- *	room. This is only allowed for an empty buffer.
- */
-static inline void skb_reserve(struct sk_buff *skb, int len)
-{
-	skb->data += len;
-	skb->tail += len;
-}
-
-static inline void skb_reset_mac_len(struct sk_buff *skb)
-{
-	skb->mac_len = skb->network_header - skb->mac_header;
-}
-
-#ifdef NET_SKBUFF_DATA_USES_OFFSET
-static inline unsigned char *skb_transport_header(const struct sk_buff *skb)
-{
-	return skb->head + skb->transport_header;
-}
-
-static inline void skb_reset_transport_header(struct sk_buff *skb)
-{
-	skb->transport_header = skb->data - skb->head;
-}
-
-static inline void skb_set_transport_header(struct sk_buff *skb,
-					    const int offset)
-{
-	skb_reset_transport_header(skb);
-	skb->transport_header += offset;
-}
-
-static inline unsigned char *skb_network_header(const struct sk_buff *skb)
-{
-	return skb->head + skb->network_header;
-}
-
-static inline void skb_reset_network_header(struct sk_buff *skb)
-{
-	skb->network_header = skb->data - skb->head;
-}
-
-static inline void skb_set_network_header(struct sk_buff *skb, const int offset)
-{
-	skb_reset_network_header(skb);
-	skb->network_header += offset;
-}
-
-static inline unsigned char *skb_mac_header(const struct sk_buff *skb)
-{
-	return skb->head + skb->mac_header;
-}
-
-static inline int skb_mac_header_was_set(const struct sk_buff *skb)
-{
-	return skb->mac_header != ~0U;
-}
-
-static inline void skb_reset_mac_header(struct sk_buff *skb)
-{
-	skb->mac_header = skb->data - skb->head;
-}
-
-static inline void skb_set_mac_header(struct sk_buff *skb, const int offset)
-{
-	skb_reset_mac_header(skb);
-	skb->mac_header += offset;
-}
-
-#else /* NET_SKBUFF_DATA_USES_OFFSET */
-
-static inline unsigned char *skb_transport_header(const struct sk_buff *skb)
-{
-	return skb->transport_header;
-}
-
-static inline void skb_reset_transport_header(struct sk_buff *skb)
-{
-	skb->transport_header = skb->data;
-}
-
-static inline void skb_set_transport_header(struct sk_buff *skb,
-					    const int offset)
-{
-	skb->transport_header = skb->data + offset;
-}
-
-static inline unsigned char *skb_network_header(const struct sk_buff *skb)
-{
-	return skb->network_header;
-}
-
-static inline void skb_reset_network_header(struct sk_buff *skb)
-{
-	skb->network_header = skb->data;
-}
-
-static inline void skb_set_network_header(struct sk_buff *skb, const int offset)
-{
-	skb->network_header = skb->data + offset;
-}
-
-static inline unsigned char *skb_mac_header(const struct sk_buff *skb)
-{
-	return skb->mac_header;
-}
-
-static inline int skb_mac_header_was_set(const struct sk_buff *skb)
-{
-	return skb->mac_header != NULL;
-}
-
-static inline void skb_reset_mac_header(struct sk_buff *skb)
-{
-	skb->mac_header = skb->data;
-}
-
-static inline void skb_set_mac_header(struct sk_buff *skb, const int offset)
-{
-	skb->mac_header = skb->data + offset;
-}
-#endif /* NET_SKBUFF_DATA_USES_OFFSET */
-
-static inline void skb_mac_header_rebuild(struct sk_buff *skb)
-{
-	if (skb_mac_header_was_set(skb)) {
-		const unsigned char *old_mac = skb_mac_header(skb);
-
-		skb_set_mac_header(skb, -skb->mac_len);
-		memmove(skb_mac_header(skb), old_mac, skb->mac_len);
-	}
-}
-
-static inline int skb_checksum_start_offset(const struct sk_buff *skb)
-{
-	return skb->csum_start - skb_headroom(skb);
-}
-
-static inline int skb_transport_offset(const struct sk_buff *skb)
-{
-	return skb_transport_header(skb) - skb->data;
-}
-
-static inline u32 skb_network_header_len(const struct sk_buff *skb)
-{
-	return skb->transport_header - skb->network_header;
-}
-
-static inline int skb_network_offset(const struct sk_buff *skb)
-{
-	return skb_network_header(skb) - skb->data;
-}
-
-static inline int pskb_network_may_pull(struct sk_buff *skb, unsigned int len)
-{
-	return pskb_may_pull(skb, skb_network_offset(skb) + len);
-}
-
-/*
- * CPUs often take a performance hit when accessing unaligned memory
- * locations. The actual performance hit varies, it can be small if the
- * hardware handles it or large if we have to take an exception and fix it
- * in software.
- *
- * Since an ethernet header is 14 bytes network drivers often end up with
- * the IP header at an unaligned offset. The IP header can be aligned by
- * shifting the start of the packet by 2 bytes. Drivers should do this
- * with:
- *
- * skb_reserve(skb, NET_IP_ALIGN);
- *
- * The downside to this alignment of the IP header is that the DMA is now
- * unaligned. On some architectures the cost of an unaligned DMA is high
- * and this cost outweighs the gains made by aligning the IP header.
- *
- * Since this trade off varies between architectures, we allow NET_IP_ALIGN
- * to be overridden.
- */
-#ifndef NET_IP_ALIGN
-#define NET_IP_ALIGN	2
-#endif
-
-/*
- * The networking layer reserves some headroom in skb data (via
- * dev_alloc_skb). This is used to avoid having to reallocate skb data when
- * the header has to grow. In the default case, if the header has to grow
- * 32 bytes or less we avoid the reallocation.
- *
- * Unfortunately this headroom changes the DMA alignment of the resulting
- * network packet. As for NET_IP_ALIGN, this unaligned DMA is expensive
- * on some architectures. An architecture can override this value,
- * perhaps setting it to a cacheline in size (since that will maintain
- * cacheline alignment of the DMA). It must be a power of 2.
- *
- * Various parts of the networking layer expect at least 32 bytes of
- * headroom, you should not reduce this.
- *
- * Using max(32, L1_CACHE_BYTES) makes sense (especially with RPS)
- * to reduce average number of cache lines per packet.
- * get_rps_cpus() for example only access one 64 bytes aligned block :
- * NET_IP_ALIGN(2) + ethernet_header(14) + IP_header(20/40) + ports(8)
- */
-#ifndef NET_SKB_PAD
-#define NET_SKB_PAD	max(32, L1_CACHE_BYTES)
-#endif
-
-extern int ___pskb_trim(struct sk_buff *skb, unsigned int len);
-
-static inline void __skb_trim(struct sk_buff *skb, unsigned int len)
-{
-	if (unlikely(skb_is_nonlinear(skb))) {
-		WARN_ON(1);
-		return;
-	}
-	skb->len = len;
-	skb_set_tail_pointer(skb, len);
-}
-
-extern void skb_trim(struct sk_buff *skb, unsigned int len);
-
-static inline int __pskb_trim(struct sk_buff *skb, unsigned int len)
-{
-	if (skb->data_len)
-		return ___pskb_trim(skb, len);
-	__skb_trim(skb, len);
-	return 0;
-}
-
-static inline int pskb_trim(struct sk_buff *skb, unsigned int len)
-{
-	return (len < skb->len) ? __pskb_trim(skb, len) : 0;
-}
-
-/**
- *	pskb_trim_unique - remove end from a paged unique (not cloned) buffer
- *	@skb: buffer to alter
- *	@len: new length
- *
- *	This is identical to pskb_trim except that the caller knows that
- *	the skb is not cloned so we should never get an error due to out-
- *	of-memory.
- */
-static inline void pskb_trim_unique(struct sk_buff *skb, unsigned int len)
-{
-	int err = pskb_trim(skb, len);
-	BUG_ON(err);
-}
-
-/**
- *	skb_orphan - orphan a buffer
- *	@skb: buffer to orphan
- *
- *	If a buffer currently has an owner then we call the owner's
- *	destructor function and make the @skb unowned. The buffer continues
- *	to exist but is no longer charged to its former owner.
- */
-static inline void skb_orphan(struct sk_buff *skb)
-{
-	if (skb->destructor)
-		skb->destructor(skb);
-	skb->destructor = NULL;
-	skb->sk		= NULL;
-}
-
-/**
- *	__skb_queue_purge - empty a list
- *	@list: list to empty
- *
- *	Delete all buffers on an &sk_buff list. Each buffer is removed from
- *	the list and one reference dropped. This function does not take the
- *	list lock and the caller must hold the relevant locks to use it.
- */
-extern void skb_queue_purge(struct sk_buff_head *list);
-static inline void __skb_queue_purge(struct sk_buff_head *list)
-{
-	struct sk_buff *skb;
-	while ((skb = __skb_dequeue(list)) != NULL)
-		kfree_skb(skb);
-}
-
-/**
- *	__dev_alloc_skb - allocate an skbuff for receiving
- *	@length: length to allocate
- *	@gfp_mask: get_free_pages mask, passed to alloc_skb
- *
- *	Allocate a new &sk_buff and assign it a usage count of one. The
- *	buffer has unspecified headroom built in. Users should allocate
- *	the headroom they think they need without accounting for the
- *	built in space. The built in space is used for optimisations.
- *
- *	%NULL is returned if there is no free memory.
- */
-static inline struct sk_buff *__dev_alloc_skb(unsigned int length,
-					      gfp_t gfp_mask)
-{
-	struct sk_buff *skb = alloc_skb(length + NET_SKB_PAD, gfp_mask);
-	if (likely(skb))
-		skb_reserve(skb, NET_SKB_PAD);
-	return skb;
-}
-
-extern struct sk_buff *dev_alloc_skb(unsigned int length);
-
-extern struct sk_buff *__netdev_alloc_skb(struct net_device *dev,
-		unsigned int length, gfp_t gfp_mask);
-
-/**
- *	netdev_alloc_skb - allocate an skbuff for rx on a specific device
- *	@dev: network device to receive on
- *	@length: length to allocate
- *
- *	Allocate a new &sk_buff and assign it a usage count of one. The
- *	buffer has unspecified headroom built in. Users should allocate
- *	the headroom they think they need without accounting for the
- *	built in space. The built in space is used for optimisations.
- *
- *	%NULL is returned if there is no free memory. Although this function
- *	allocates memory it can be called from an interrupt.
- */
-static inline struct sk_buff *netdev_alloc_skb(struct net_device *dev,
-		unsigned int length)
-{
-	return __netdev_alloc_skb(dev, length, GFP_ATOMIC);
-}
-
-static inline struct sk_buff *__netdev_alloc_skb_ip_align(struct net_device *dev,
-		unsigned int length, gfp_t gfp)
-{
-	struct sk_buff *skb = __netdev_alloc_skb(dev, length + NET_IP_ALIGN, gfp);
-
-	if (NET_IP_ALIGN && skb)
-		skb_reserve(skb, NET_IP_ALIGN);
-	return skb;
-}
-
-static inline struct sk_buff *netdev_alloc_skb_ip_align(struct net_device *dev,
-		unsigned int length)
-{
-	return __netdev_alloc_skb_ip_align(dev, length, GFP_ATOMIC);
-}
-
-/**
- * skb_frag_page - retrieve the page refered to by a paged fragment
- * @frag: the paged fragment
- *
- * Returns the &struct page associated with @frag.
- */
-static inline struct page *skb_frag_page(const skb_frag_t *frag)
-{
-	return frag->page.p;
-}
-
-/**
- * __skb_frag_ref - take an addition reference on a paged fragment.
- * @frag: the paged fragment
- *
- * Takes an additional reference on the paged fragment @frag.
- */
-static inline void __skb_frag_ref(skb_frag_t *frag)
-{
-	get_page(skb_frag_page(frag));
-}
-
-/**
- * skb_frag_ref - take an addition reference on a paged fragment of an skb.
- * @skb: the buffer
- * @f: the fragment offset.
- *
- * Takes an additional reference on the @f'th paged fragment of @skb.
- */
-static inline void skb_frag_ref(struct sk_buff *skb, int f)
-{
-	__skb_frag_ref(&skb_shinfo(skb)->frags[f]);
-}
-
-/**
- * __skb_frag_unref - release a reference on a paged fragment.
- * @frag: the paged fragment
- *
- * Releases a reference on the paged fragment @frag.
- */
-static inline void __skb_frag_unref(skb_frag_t *frag)
-{
-	put_page(skb_frag_page(frag));
-}
-
-/**
- * skb_frag_unref - release a reference on a paged fragment of an skb.
- * @skb: the buffer
- * @f: the fragment offset
- *
- * Releases a reference on the @f'th paged fragment of @skb.
- */
-static inline void skb_frag_unref(struct sk_buff *skb, int f)
-{
-	__skb_frag_unref(&skb_shinfo(skb)->frags[f]);
-}
-
-/**
- * skb_frag_address - gets the address of the data contained in a paged fragment
- * @frag: the paged fragment buffer
- *
- * Returns the address of the data within @frag. The page must already
- * be mapped.
- */
-static inline void *skb_frag_address(const skb_frag_t *frag)
-{
-	return page_address(skb_frag_page(frag)) + frag->page_offset;
-}
-
-/**
- * skb_frag_address_safe - gets the address of the data contained in a paged fragment
- * @frag: the paged fragment buffer
- *
- * Returns the address of the data within @frag. Checks that the page
- * is mapped and returns %NULL otherwise.
- */
-static inline void *skb_frag_address_safe(const skb_frag_t *frag)
-{
-	void *ptr = page_address(skb_frag_page(frag));
-	if (unlikely(!ptr))
-		return NULL;
-
-	return ptr + frag->page_offset;
-}
-
-/**
- * __skb_frag_set_page - sets the page contained in a paged fragment
- * @frag: the paged fragment
- * @page: the page to set
- *
- * Sets the fragment @frag to contain @page.
- */
-static inline void __skb_frag_set_page(skb_frag_t *frag, struct page *page)
-{
-	frag->page.p = page;
-}
-
-/**
- * skb_frag_set_page - sets the page contained in a paged fragment of an skb
- * @skb: the buffer
- * @f: the fragment offset
- * @page: the page to set
- *
- * Sets the @f'th fragment of @skb to contain @page.
- */
-static inline void skb_frag_set_page(struct sk_buff *skb, int f,
-				     struct page *page)
-{
-	__skb_frag_set_page(&skb_shinfo(skb)->frags[f], page);
-}
-
-/**
- * skb_frag_dma_map - maps a paged fragment via the DMA API
- * @dev: the device to map the fragment to
- * @frag: the paged fragment to map
- * @offset: the offset within the fragment (starting at the
- *          fragment's own offset)
- * @size: the number of bytes to map
- * @dir: the direction of the mapping (%PCI_DMA_*)
- *
- * Maps the page associated with @frag to @device.
- */
-static inline dma_addr_t skb_frag_dma_map(struct device *dev,
-					  const skb_frag_t *frag,
-					  size_t offset, size_t size,
-					  enum dma_data_direction dir)
-{
-	return dma_map_page(dev, skb_frag_page(frag),
-			    frag->page_offset + offset, size, dir);
-}
-
-static inline struct sk_buff *pskb_copy(struct sk_buff *skb,
-					gfp_t gfp_mask)
-{
-	return __pskb_copy(skb, skb_headroom(skb), gfp_mask);
-}
-
-/**
- *	skb_clone_writable - is the header of a clone writable
- *	@skb: buffer to check
- *	@len: length up to which to write
- *
- *	Returns true if modifying the header part of the cloned buffer
- *	does not requires the data to be copied.
- */
-static inline int skb_clone_writable(const struct sk_buff *skb, unsigned int len)
-{
-	return !skb_header_cloned(skb) &&
-	       skb_headroom(skb) + len <= skb->hdr_len;
-}
-
-static inline int __skb_cow(struct sk_buff *skb, unsigned int headroom,
-			    int cloned)
-{
-	int delta = 0;
-
-	if (headroom > skb_headroom(skb))
-		delta = headroom - skb_headroom(skb);
-
-	if (delta || cloned)
-		return pskb_expand_head(skb, ALIGN(delta, NET_SKB_PAD), 0,
-					GFP_ATOMIC);
-	return 0;
-}
-
-/**
- *	skb_cow - copy header of skb when it is required
- *	@skb: buffer to cow
- *	@headroom: needed headroom
- *
- *	If the skb passed lacks sufficient headroom or its data part
- *	is shared, data is reallocated. If reallocation fails, an error
- *	is returned and original skb is not changed.
- *
- *	The result is skb with writable area skb->head...skb->tail
- *	and at least @headroom of space at head.
- */
-static inline int skb_cow(struct sk_buff *skb, unsigned int headroom)
-{
-	return __skb_cow(skb, headroom, skb_cloned(skb));
-}
-
-/**
- *	skb_cow_head - skb_cow but only making the head writable
- *	@skb: buffer to cow
- *	@headroom: needed headroom
- *
- *	This function is identical to skb_cow except that we replace the
- *	skb_cloned check by skb_header_cloned.  It should be used when
- *	you only need to push on some header and do not need to modify
- *	the data.
- */
-static inline int skb_cow_head(struct sk_buff *skb, unsigned int headroom)
-{
-	return __skb_cow(skb, headroom, skb_header_cloned(skb));
-}
-
-/**
- *	skb_padto	- pad an skbuff up to a minimal size
- *	@skb: buffer to pad
- *	@len: minimal length
- *
- *	Pads up a buffer to ensure the trailing bytes exist and are
- *	blanked. If the buffer already contains sufficient data it
- *	is untouched. Otherwise it is extended. Returns zero on
- *	success. The skb is freed on error.
- */
- 
-static inline int skb_padto(struct sk_buff *skb, unsigned int len)
-{
-	unsigned int size = skb->len;
-	if (likely(size >= len))
-		return 0;
-	return skb_pad(skb, len - size);
-}
-
-static inline int skb_add_data(struct sk_buff *skb,
-			       char __user *from, int copy)
-{
-	const int off = skb->len;
-
-	if (skb->ip_summed == CHECKSUM_NONE) {
-		int err = 0;
-		__wsum csum = csum_and_copy_from_user(from, skb_put(skb, copy),
-							    copy, 0, &err);
-		if (!err) {
-			skb->csum = csum_block_add(skb->csum, csum, off);
-			return 0;
-		}
-	} else if (!copy_from_user(skb_put(skb, copy), from, copy))
-		return 0;
-
-	__skb_trim(skb, off);
-	return -EFAULT;
-}
-
-static inline int skb_can_coalesce(struct sk_buff *skb, int i,
-				   const struct page *page, int off)
-{
-	if (i) {
-		const struct skb_frag_struct *frag = &skb_shinfo(skb)->frags[i - 1];
-
-		return page == skb_frag_page(frag) &&
-		       off == frag->page_offset + skb_frag_size(frag);
-	}
-	return 0;
-}
-
-static inline int __skb_linearize(struct sk_buff *skb)
-{
-	return __pskb_pull_tail(skb, skb->data_len) ? 0 : -ENOMEM;
-}
-
-/**
- *	skb_linearize - convert paged skb to linear one
- *	@skb: buffer to linarize
- *
- *	If there is no free memory -ENOMEM is returned, otherwise zero
- *	is returned and the old skb data released.
- */
-static inline int skb_linearize(struct sk_buff *skb)
-{
-	return skb_is_nonlinear(skb) ? __skb_linearize(skb) : 0;
-}
-
-/**
- *	skb_linearize_cow - make sure skb is linear and writable
- *	@skb: buffer to process
- *
- *	If there is no free memory -ENOMEM is returned, otherwise zero
- *	is returned and the old skb data released.
- */
-static inline int skb_linearize_cow(struct sk_buff *skb)
-{
-	return skb_is_nonlinear(skb) || skb_cloned(skb) ?
-	       __skb_linearize(skb) : 0;
-}
-
-/**
- *	skb_postpull_rcsum - update checksum for received skb after pull
- *	@skb: buffer to update
- *	@start: start of data before pull
- *	@len: length of data pulled
- *
- *	After doing a pull on a received packet, you need to call this to
- *	update the CHECKSUM_COMPLETE checksum, or set ip_summed to
- *	CHECKSUM_NONE so that it can be recomputed from scratch.
- */
-
-static inline void skb_postpull_rcsum(struct sk_buff *skb,
-				      const void *start, unsigned int len)
-{
-	if (skb->ip_summed == CHECKSUM_COMPLETE)
-		skb->csum = csum_sub(skb->csum, csum_partial(start, len, 0));
-}
-
-unsigned char *skb_pull_rcsum(struct sk_buff *skb, unsigned int len);
-
-/**
- *	pskb_trim_rcsum - trim received skb and update checksum
- *	@skb: buffer to trim
- *	@len: new length
- *
- *	This is exactly the same as pskb_trim except that it ensures the
- *	checksum of received packets are still valid after the operation.
- */
-
-static inline int pskb_trim_rcsum(struct sk_buff *skb, unsigned int len)
-{
-	if (likely(len >= skb->len))
-		return 0;
-	if (skb->ip_summed == CHECKSUM_COMPLETE)
-		skb->ip_summed = CHECKSUM_NONE;
-	return __pskb_trim(skb, len);
-}
-
-#define skb_queue_walk(queue, skb) \
-		for (skb = (queue)->next;					\
-		     skb != (struct sk_buff *)(queue);				\
-		     skb = skb->next)
-
-#define skb_queue_walk_safe(queue, skb, tmp)					\
-		for (skb = (queue)->next, tmp = skb->next;			\
-		     skb != (struct sk_buff *)(queue);				\
-		     skb = tmp, tmp = skb->next)
-
-#define skb_queue_walk_from(queue, skb)						\
-		for (; skb != (struct sk_buff *)(queue);			\
-		     skb = skb->next)
-
-#define skb_queue_walk_from_safe(queue, skb, tmp)				\
-		for (tmp = skb->next;						\
-		     skb != (struct sk_buff *)(queue);				\
-		     skb = tmp, tmp = skb->next)
-
-#define skb_queue_reverse_walk(queue, skb) \
-		for (skb = (queue)->prev;					\
-		     skb != (struct sk_buff *)(queue);				\
-		     skb = skb->prev)
-
-#define skb_queue_reverse_walk_safe(queue, skb, tmp)				\
-		for (skb = (queue)->prev, tmp = skb->prev;			\
-		     skb != (struct sk_buff *)(queue);				\
-		     skb = tmp, tmp = skb->prev)
-
-#define skb_queue_reverse_walk_from_safe(queue, skb, tmp)			\
-		for (tmp = skb->prev;						\
-		     skb != (struct sk_buff *)(queue);				\
-		     skb = tmp, tmp = skb->prev)
-
-static inline bool skb_has_frag_list(const struct sk_buff *skb)
-{
-	return skb_shinfo(skb)->frag_list != NULL;
-}
-
-static inline void skb_frag_list_init(struct sk_buff *skb)
-{
-	skb_shinfo(skb)->frag_list = NULL;
-}
-
-static inline void skb_frag_add_head(struct sk_buff *skb, struct sk_buff *frag)
-{
-	frag->next = skb_shinfo(skb)->frag_list;
-	skb_shinfo(skb)->frag_list = frag;
-}
-
-#define skb_walk_frags(skb, iter)	\
-	for (iter = skb_shinfo(skb)->frag_list; iter; iter = iter->next)
-
-extern struct sk_buff *__skb_recv_datagram(struct sock *sk, unsigned flags,
-					   int *peeked, int *off, int *err);
-extern struct sk_buff *skb_recv_datagram(struct sock *sk, unsigned flags,
-					 int noblock, int *err);
-extern unsigned int    datagram_poll(struct file *file, struct socket *sock,
-				     struct poll_table_struct *wait);
-extern int	       skb_copy_datagram_iovec(const struct sk_buff *from,
-					       int offset, struct iovec *to,
-					       int size);
-extern int	       skb_copy_and_csum_datagram_iovec(struct sk_buff *skb,
-							int hlen,
-							struct iovec *iov);
-extern int	       skb_copy_datagram_from_iovec(struct sk_buff *skb,
-						    int offset,
-						    const struct iovec *from,
-						    int from_offset,
-						    int len);
-extern int	       skb_copy_datagram_const_iovec(const struct sk_buff *from,
-						     int offset,
-						     const struct iovec *to,
-						     int to_offset,
-						     int size);
-extern void	       skb_free_datagram(struct sock *sk, struct sk_buff *skb);
-extern void	       skb_free_datagram_locked(struct sock *sk,
-						struct sk_buff *skb);
-extern int	       skb_kill_datagram(struct sock *sk, struct sk_buff *skb,
-					 unsigned int flags);
-extern __wsum	       skb_checksum(const struct sk_buff *skb, int offset,
-				    int len, __wsum csum);
-extern int	       skb_copy_bits(const struct sk_buff *skb, int offset,
-				     void *to, int len);
-extern int	       skb_store_bits(struct sk_buff *skb, int offset,
-				      const void *from, int len);
-extern __wsum	       skb_copy_and_csum_bits(const struct sk_buff *skb,
-					      int offset, u8 *to, int len,
-					      __wsum csum);
-extern int             skb_splice_bits(struct sk_buff *skb,
-						unsigned int offset,
-						struct pipe_inode_info *pipe,
-						unsigned int len,
-						unsigned int flags);
-extern void	       skb_copy_and_csum_dev(const struct sk_buff *skb, u8 *to);
-extern void	       skb_split(struct sk_buff *skb,
-				 struct sk_buff *skb1, const u32 len);
-extern int	       skb_shift(struct sk_buff *tgt, struct sk_buff *skb,
-				 int shiftlen);
-
-extern struct sk_buff *skb_segment(struct sk_buff *skb,
-				   netdev_features_t features);
-
-static inline void *skb_header_pointer(const struct sk_buff *skb, int offset,
-				       int len, void *buffer)
-{
-	int hlen = skb_headlen(skb);
-
-	if (hlen - offset >= len)
-		return skb->data + offset;
-
-	if (skb_copy_bits(skb, offset, buffer, len) < 0)
-		return NULL;
-
-	return buffer;
-}
-
-static inline void skb_copy_from_linear_data(const struct sk_buff *skb,
-					     void *to,
-					     const unsigned int len)
-{
-	memcpy(to, skb->data, len);
-}
-
-static inline void skb_copy_from_linear_data_offset(const struct sk_buff *skb,
-						    const int offset, void *to,
-						    const unsigned int len)
-{
-	memcpy(to, skb->data + offset, len);
-}
-
-static inline void skb_copy_to_linear_data(struct sk_buff *skb,
-					   const void *from,
-					   const unsigned int len)
-{
-	memcpy(skb->data, from, len);
-}
-
-static inline void skb_copy_to_linear_data_offset(struct sk_buff *skb,
-						  const int offset,
-						  const void *from,
-						  const unsigned int len)
-{
-	memcpy(skb->data + offset, from, len);
-}
-
-extern void skb_init(void);
-
-static inline ktime_t skb_get_ktime(const struct sk_buff *skb)
-{
-	return skb->tstamp;
-}
-
-/**
- *	skb_get_timestamp - get timestamp from a skb
- *	@skb: skb to get stamp from
- *	@stamp: pointer to struct timeval to store stamp in
- *
- *	Timestamps are stored in the skb as offsets to a base timestamp.
- *	This function converts the offset back to a struct timeval and stores
- *	it in stamp.
- */
-static inline void skb_get_timestamp(const struct sk_buff *skb,
-				     struct timeval *stamp)
-{
-	*stamp = ktime_to_timeval(skb->tstamp);
-}
-
-static inline void skb_get_timestampns(const struct sk_buff *skb,
-				       struct timespec *stamp)
-{
-	*stamp = ktime_to_timespec(skb->tstamp);
-}
-
-static inline void __net_timestamp(struct sk_buff *skb)
-{
-	skb->tstamp = ktime_get_real();
-}
-
-static inline ktime_t net_timedelta(ktime_t t)
-{
-	return ktime_sub(ktime_get_real(), t);
-}
-
-static inline ktime_t net_invalid_timestamp(void)
-{
-	return ktime_set(0, 0);
-}
-
-extern void skb_timestamping_init(void);
-
-#ifdef CONFIG_NETWORK_PHY_TIMESTAMPING
-
-extern void skb_clone_tx_timestamp(struct sk_buff *skb);
-extern bool skb_defer_rx_timestamp(struct sk_buff *skb);
-
-#else /* CONFIG_NETWORK_PHY_TIMESTAMPING */
-
-static inline void skb_clone_tx_timestamp(struct sk_buff *skb)
-{
-}
-
-static inline bool skb_defer_rx_timestamp(struct sk_buff *skb)
-{
-	return false;
-}
-
-#endif /* !CONFIG_NETWORK_PHY_TIMESTAMPING */
-
-/**
- * skb_complete_tx_timestamp() - deliver cloned skb with tx timestamps
- *
- * PHY drivers may accept clones of transmitted packets for
- * timestamping via their phy_driver.txtstamp method. These drivers
- * must call this function to return the skb back to the stack, with
- * or without a timestamp.
- *
- * @skb: clone of the the original outgoing packet
- * @hwtstamps: hardware time stamps, may be NULL if not available
- *
- */
-void skb_complete_tx_timestamp(struct sk_buff *skb,
-			       struct skb_shared_hwtstamps *hwtstamps);
-
-/**
- * skb_tstamp_tx - queue clone of skb with send time stamps
- * @orig_skb:	the original outgoing packet
- * @hwtstamps:	hardware time stamps, may be NULL if not available
- *
- * If the skb has a socket associated, then this function clones the
- * skb (thus sharing the actual data and optional structures), stores
- * the optional hardware time stamping information (if non NULL) or
- * generates a software time stamp (otherwise), then queues the clone
- * to the error queue of the socket.  Errors are silently ignored.
- */
-extern void skb_tstamp_tx(struct sk_buff *orig_skb,
-			struct skb_shared_hwtstamps *hwtstamps);
-
-static inline void sw_tx_timestamp(struct sk_buff *skb)
-{
-	if (skb_shinfo(skb)->tx_flags & SKBTX_SW_TSTAMP &&
-	    !(skb_shinfo(skb)->tx_flags & SKBTX_IN_PROGRESS))
-		skb_tstamp_tx(skb, NULL);
-}
-
-/**
- * skb_tx_timestamp() - Driver hook for transmit timestamping
- *
- * Ethernet MAC Drivers should call this function in their hard_xmit()
- * function immediately before giving the sk_buff to the MAC hardware.
- *
- * @skb: A socket buffer.
- */
-static inline void skb_tx_timestamp(struct sk_buff *skb)
-{
-	skb_clone_tx_timestamp(skb);
-	sw_tx_timestamp(skb);
-}
-
-/**
- * skb_complete_wifi_ack - deliver skb with wifi status
- *
- * @skb: the original outgoing packet
- * @acked: ack status
- *
- */
-void skb_complete_wifi_ack(struct sk_buff *skb, bool acked);
-
-extern __sum16 __skb_checksum_complete_head(struct sk_buff *skb, int len);
-extern __sum16 __skb_checksum_complete(struct sk_buff *skb);
-
-static inline int skb_csum_unnecessary(const struct sk_buff *skb)
-{
-	return skb->ip_summed & CHECKSUM_UNNECESSARY;
-}
-
-/**
- *	skb_checksum_complete - Calculate checksum of an entire packet
- *	@skb: packet to process
- *
- *	This function calculates the checksum over the entire packet plus
- *	the value of skb->csum.  The latter can be used to supply the
- *	checksum of a pseudo header as used by TCP/UDP.  It returns the
- *	checksum.
- *
- *	For protocols that contain complete checksums such as ICMP/TCP/UDP,
- *	this function can be used to verify that checksum on received
- *	packets.  In that case the function should return zero if the
- *	checksum is correct.  In particular, this function will return zero
- *	if skb->ip_summed is CHECKSUM_UNNECESSARY which indicates that the
- *	hardware has already verified the correctness of the checksum.
- */
-static inline __sum16 skb_checksum_complete(struct sk_buff *skb)
-{
-	return skb_csum_unnecessary(skb) ?
-	       0 : __skb_checksum_complete(skb);
-}
-
-#if defined(CONFIG_NF_CONNTRACK) || defined(CONFIG_NF_CONNTRACK_MODULE)
-extern void nf_conntrack_destroy(struct nf_conntrack *nfct);
-static inline void nf_conntrack_put(struct nf_conntrack *nfct)
-{
-	if (nfct && atomic_dec_and_test(&nfct->use))
-		nf_conntrack_destroy(nfct);
-}
-static inline void nf_conntrack_get(struct nf_conntrack *nfct)
-{
-	if (nfct)
-		atomic_inc(&nfct->use);
-}
-#endif
-#ifdef NET_SKBUFF_NF_DEFRAG_NEEDED
-static inline void nf_conntrack_get_reasm(struct sk_buff *skb)
-{
-	if (skb)
-		atomic_inc(&skb->users);
-}
-static inline void nf_conntrack_put_reasm(struct sk_buff *skb)
-{
-	if (skb)
-		kfree_skb(skb);
-}
-#endif
-#ifdef CONFIG_BRIDGE_NETFILTER
-static inline void nf_bridge_put(struct nf_bridge_info *nf_bridge)
-{
-	if (nf_bridge && atomic_dec_and_test(&nf_bridge->use))
-		kfree(nf_bridge);
-}
-static inline void nf_bridge_get(struct nf_bridge_info *nf_bridge)
-{
-	if (nf_bridge)
-		atomic_inc(&nf_bridge->use);
-}
-#endif /* CONFIG_BRIDGE_NETFILTER */
-static inline void nf_reset(struct sk_buff *skb)
-{
-#if defined(CONFIG_NF_CONNTRACK) || defined(CONFIG_NF_CONNTRACK_MODULE)
-	nf_conntrack_put(skb->nfct);
-	skb->nfct = NULL;
-#endif
-#ifdef NET_SKBUFF_NF_DEFRAG_NEEDED
-	nf_conntrack_put_reasm(skb->nfct_reasm);
-	skb->nfct_reasm = NULL;
-#endif
-#ifdef CONFIG_BRIDGE_NETFILTER
-	nf_bridge_put(skb->nf_bridge);
-	skb->nf_bridge = NULL;
-#endif
-}
-
-/* Note: This doesn't put any conntrack and bridge info in dst. */
-static inline void __nf_copy(struct sk_buff *dst, const struct sk_buff *src)
-{
-#if defined(CONFIG_NF_CONNTRACK) || defined(CONFIG_NF_CONNTRACK_MODULE)
-	dst->nfct = src->nfct;
-	nf_conntrack_get(src->nfct);
-	dst->nfctinfo = src->nfctinfo;
-#endif
-#ifdef NET_SKBUFF_NF_DEFRAG_NEEDED
-	dst->nfct_reasm = src->nfct_reasm;
-	nf_conntrack_get_reasm(src->nfct_reasm);
-#endif
-#ifdef CONFIG_BRIDGE_NETFILTER
-	dst->nf_bridge  = src->nf_bridge;
-	nf_bridge_get(src->nf_bridge);
-#endif
-}
-
-static inline void nf_copy(struct sk_buff *dst, const struct sk_buff *src)
-{
-#if defined(CONFIG_NF_CONNTRACK) || defined(CONFIG_NF_CONNTRACK_MODULE)
-	nf_conntrack_put(dst->nfct);
-#endif
-#ifdef NET_SKBUFF_NF_DEFRAG_NEEDED
-	nf_conntrack_put_reasm(dst->nfct_reasm);
-#endif
-#ifdef CONFIG_BRIDGE_NETFILTER
-	nf_bridge_put(dst->nf_bridge);
-#endif
-	__nf_copy(dst, src);
-}
-
-#ifdef CONFIG_NETWORK_SECMARK
-static inline void skb_copy_secmark(struct sk_buff *to, const struct sk_buff *from)
-{
-	to->secmark = from->secmark;
-}
-
-static inline void skb_init_secmark(struct sk_buff *skb)
-{
-	skb->secmark = 0;
-}
-#else
-static inline void skb_copy_secmark(struct sk_buff *to, const struct sk_buff *from)
-{ }
-
-static inline void skb_init_secmark(struct sk_buff *skb)
-{ }
-#endif
-
-static inline void skb_set_queue_mapping(struct sk_buff *skb, u16 queue_mapping)
-{
-	skb->queue_mapping = queue_mapping;
-}
-
-static inline u16 skb_get_queue_mapping(const struct sk_buff *skb)
-{
-	return skb->queue_mapping;
-}
-
-static inline void skb_copy_queue_mapping(struct sk_buff *to, const struct sk_buff *from)
-{
-	to->queue_mapping = from->queue_mapping;
-}
-
-static inline void skb_record_rx_queue(struct sk_buff *skb, u16 rx_queue)
-{
-	skb->queue_mapping = rx_queue + 1;
-}
-
-static inline u16 skb_get_rx_queue(const struct sk_buff *skb)
-{
-	return skb->queue_mapping - 1;
-}
-
-static inline bool skb_rx_queue_recorded(const struct sk_buff *skb)
-{
-	return skb->queue_mapping != 0;
-}
-
-extern u16 __skb_tx_hash(const struct net_device *dev,
-			 const struct sk_buff *skb,
-			 unsigned int num_tx_queues);
-
-#ifdef CONFIG_XFRM
-static inline struct sec_path *skb_sec_path(struct sk_buff *skb)
-{
-	return skb->sp;
-}
-#else
-static inline struct sec_path *skb_sec_path(struct sk_buff *skb)
-{
-	return NULL;
-}
-#endif
-
-static inline bool skb_is_gso(const struct sk_buff *skb)
-{
-	return skb_shinfo(skb)->gso_size;
-}
-
-static inline bool skb_is_gso_v6(const struct sk_buff *skb)
-{
-	return skb_shinfo(skb)->gso_type & SKB_GSO_TCPV6;
-}
-
-extern void __skb_warn_lro_forwarding(const struct sk_buff *skb);
-
-static inline bool skb_warn_if_lro(const struct sk_buff *skb)
-{
-	/* LRO sets gso_size but not gso_type, whereas if GSO is really
-	 * wanted then gso_type will be set. */
-	const struct skb_shared_info *shinfo = skb_shinfo(skb);
-
-	if (skb_is_nonlinear(skb) && shinfo->gso_size != 0 &&
-	    unlikely(shinfo->gso_type == 0)) {
-		__skb_warn_lro_forwarding(skb);
-		return true;
-	}
-	return false;
-}
-
-static inline void skb_forward_csum(struct sk_buff *skb)
-{
-	/* Unfortunately we don't support this one.  Any brave souls? */
-	if (skb->ip_summed == CHECKSUM_COMPLETE)
-		skb->ip_summed = CHECKSUM_NONE;
-}
-
-/**
- * skb_checksum_none_assert - make sure skb ip_summed is CHECKSUM_NONE
- * @skb: skb to check
- *
- * fresh skbs have their ip_summed set to CHECKSUM_NONE.
- * Instead of forcing ip_summed to CHECKSUM_NONE, we can
- * use this helper, to document places where we make this assertion.
- */
-static inline void skb_checksum_none_assert(const struct sk_buff *skb)
-{
-#ifdef DEBUG
-	BUG_ON(skb->ip_summed != CHECKSUM_NONE);
-#endif
-}
-
-bool skb_partial_csum_set(struct sk_buff *skb, u16 start, u16 off);
-
-static inline bool skb_is_recycleable(const struct sk_buff *skb, int skb_size)
-{
-	if (irqs_disabled())
-		return false;
-
-	if (skb_shinfo(skb)->tx_flags & SKBTX_DEV_ZEROCOPY)
-		return false;
-
-	if (skb_is_nonlinear(skb) || skb->fclone != SKB_FCLONE_UNAVAILABLE)
-		return false;
-
-	skb_size = SKB_DATA_ALIGN(skb_size + NET_SKB_PAD);
-	if (skb_end_pointer(skb) - skb->head < skb_size)
-		return false;
-
-	if (skb_shared(skb) || skb_cloned(skb))
-		return false;
-
-	return true;
-}
-#endif	/* __KERNEL__ */
-#endif	/* _LINUX_SKBUFF_H */
diff --git a/ANDROID_3.4.5/include/linux/slab.h b/ANDROID_3.4.5/include/linux/slab.h
deleted file mode 100644
index a595dce6..00000000
--- a/ANDROID_3.4.5/include/linux/slab.h
+++ /dev/null
@@ -1,367 +0,0 @@
-/*
- * Written by Mark Hemment, 1996 (markhe@nextd.demon.co.uk).
- *
- * (C) SGI 2006, Christoph Lameter
- * 	Cleaned up and restructured to ease the addition of alternative
- * 	implementations of SLAB allocators.
- */
-
-#ifndef _LINUX_SLAB_H
-#define	_LINUX_SLAB_H
-
-#include <linux/gfp.h>
-#include <linux/types.h>
-
-/*
- * Flags to pass to kmem_cache_create().
- * The ones marked DEBUG are only valid if CONFIG_SLAB_DEBUG is set.
- */
-#define SLAB_DEBUG_FREE		0x00000100UL	/* DEBUG: Perform (expensive) checks on free */
-#define SLAB_RED_ZONE		0x00000400UL	/* DEBUG: Red zone objs in a cache */
-#define SLAB_POISON		0x00000800UL	/* DEBUG: Poison objects */
-#define SLAB_HWCACHE_ALIGN	0x00002000UL	/* Align objs on cache lines */
-#define SLAB_CACHE_DMA		0x00004000UL	/* Use GFP_DMA memory */
-#define SLAB_STORE_USER		0x00010000UL	/* DEBUG: Store the last owner for bug hunting */
-#define SLAB_PANIC		0x00040000UL	/* Panic if kmem_cache_create() fails */
-/*
- * SLAB_DESTROY_BY_RCU - **WARNING** READ THIS!
- *
- * This delays freeing the SLAB page by a grace period, it does _NOT_
- * delay object freeing. This means that if you do kmem_cache_free()
- * that memory location is free to be reused at any time. Thus it may
- * be possible to see another object there in the same RCU grace period.
- *
- * This feature only ensures the memory location backing the object
- * stays valid, the trick to using this is relying on an independent
- * object validation pass. Something like:
- *
- *  rcu_read_lock()
- * again:
- *  obj = lockless_lookup(key);
- *  if (obj) {
- *    if (!try_get_ref(obj)) // might fail for free objects
- *      goto again;
- *
- *    if (obj->key != key) { // not the object we expected
- *      put_ref(obj);
- *      goto again;
- *    }
- *  }
- *  rcu_read_unlock();
- *
- * See also the comment on struct slab_rcu in mm/slab.c.
- */
-#define SLAB_DESTROY_BY_RCU	0x00080000UL	/* Defer freeing slabs to RCU */
-#define SLAB_MEM_SPREAD		0x00100000UL	/* Spread some memory over cpuset */
-#define SLAB_TRACE		0x00200000UL	/* Trace allocations and frees */
-
-/* Flag to prevent checks on free */
-#ifdef CONFIG_DEBUG_OBJECTS
-# define SLAB_DEBUG_OBJECTS	0x00400000UL
-#else
-# define SLAB_DEBUG_OBJECTS	0x00000000UL
-#endif
-
-#define SLAB_NOLEAKTRACE	0x00800000UL	/* Avoid kmemleak tracing */
-
-/* Don't track use of uninitialized memory */
-#ifdef CONFIG_KMEMCHECK
-# define SLAB_NOTRACK		0x01000000UL
-#else
-# define SLAB_NOTRACK		0x00000000UL
-#endif
-#ifdef CONFIG_FAILSLAB
-# define SLAB_FAILSLAB		0x02000000UL	/* Fault injection mark */
-#else
-# define SLAB_FAILSLAB		0x00000000UL
-#endif
-
-/* The following flags affect the page allocator grouping pages by mobility */
-#define SLAB_RECLAIM_ACCOUNT	0x00020000UL		/* Objects are reclaimable */
-#define SLAB_TEMPORARY		SLAB_RECLAIM_ACCOUNT	/* Objects are short-lived */
-/*
- * ZERO_SIZE_PTR will be returned for zero sized kmalloc requests.
- *
- * Dereferencing ZERO_SIZE_PTR will lead to a distinct access fault.
- *
- * ZERO_SIZE_PTR can be passed to kfree though in the same way that NULL can.
- * Both make kfree a no-op.
- */
-#define ZERO_SIZE_PTR ((void *)16)
-
-#define ZERO_OR_NULL_PTR(x) ((unsigned long)(x) <= \
-				(unsigned long)ZERO_SIZE_PTR)
-
-/*
- * struct kmem_cache related prototypes
- */
-void __init kmem_cache_init(void);
-int slab_is_available(void);
-
-struct kmem_cache *kmem_cache_create(const char *, size_t, size_t,
-			unsigned long,
-			void (*)(void *));
-void kmem_cache_destroy(struct kmem_cache *);
-int kmem_cache_shrink(struct kmem_cache *);
-void kmem_cache_free(struct kmem_cache *, void *);
-unsigned int kmem_cache_size(struct kmem_cache *);
-
-/*
- * Please use this macro to create slab caches. Simply specify the
- * name of the structure and maybe some flags that are listed above.
- *
- * The alignment of the struct determines object alignment. If you
- * f.e. add ____cacheline_aligned_in_smp to the struct declaration
- * then the objects will be properly aligned in SMP configurations.
- */
-#define KMEM_CACHE(__struct, __flags) kmem_cache_create(#__struct,\
-		sizeof(struct __struct), __alignof__(struct __struct),\
-		(__flags), NULL)
-
-/*
- * The largest kmalloc size supported by the slab allocators is
- * 32 megabyte (2^25) or the maximum allocatable page order if that is
- * less than 32 MB.
- *
- * WARNING: Its not easy to increase this value since the allocators have
- * to do various tricks to work around compiler limitations in order to
- * ensure proper constant folding.
- */
-#define KMALLOC_SHIFT_HIGH	((MAX_ORDER + PAGE_SHIFT - 1) <= 25 ? \
-				(MAX_ORDER + PAGE_SHIFT - 1) : 25)
-
-#define KMALLOC_MAX_SIZE	(1UL << KMALLOC_SHIFT_HIGH)
-#define KMALLOC_MAX_ORDER	(KMALLOC_SHIFT_HIGH - PAGE_SHIFT)
-
-/*
- * Some archs want to perform DMA into kmalloc caches and need a guaranteed
- * alignment larger than the alignment of a 64-bit integer.
- * Setting ARCH_KMALLOC_MINALIGN in arch headers allows that.
- */
-#ifdef ARCH_DMA_MINALIGN
-#define ARCH_KMALLOC_MINALIGN ARCH_DMA_MINALIGN
-#else
-#define ARCH_KMALLOC_MINALIGN __alignof__(unsigned long long)
-#endif
-
-/*
- * Setting ARCH_SLAB_MINALIGN in arch headers allows a different alignment.
- * Intended for arches that get misalignment faults even for 64 bit integer
- * aligned buffers.
- */
-#ifndef ARCH_SLAB_MINALIGN
-#define ARCH_SLAB_MINALIGN __alignof__(unsigned long long)
-#endif
-
-/*
- * Common kmalloc functions provided by all allocators
- */
-void * __must_check __krealloc(const void *, size_t, gfp_t);
-void * __must_check krealloc(const void *, size_t, gfp_t);
-void kfree(const void *);
-void kzfree(const void *);
-size_t ksize(const void *);
-
-/*
- * Allocator specific definitions. These are mainly used to establish optimized
- * ways to convert kmalloc() calls to kmem_cache_alloc() invocations by
- * selecting the appropriate general cache at compile time.
- *
- * Allocators must define at least:
- *
- *	kmem_cache_alloc()
- *	__kmalloc()
- *	kmalloc()
- *
- * Those wishing to support NUMA must also define:
- *
- *	kmem_cache_alloc_node()
- *	kmalloc_node()
- *
- * See each allocator definition file for additional comments and
- * implementation notes.
- */
-#ifdef CONFIG_SLUB
-#include <linux/slub_def.h>
-#elif defined(CONFIG_SLOB)
-#include <linux/slob_def.h>
-#else
-#include <linux/slab_def.h>
-#endif
-
-/**
- * kmalloc_array - allocate memory for an array.
- * @n: number of elements.
- * @size: element size.
- * @flags: the type of memory to allocate.
- *
- * The @flags argument may be one of:
- *
- * %GFP_USER - Allocate memory on behalf of user.  May sleep.
- *
- * %GFP_KERNEL - Allocate normal kernel ram.  May sleep.
- *
- * %GFP_ATOMIC - Allocation will not sleep.  May use emergency pools.
- *   For example, use this inside interrupt handlers.
- *
- * %GFP_HIGHUSER - Allocate pages from high memory.
- *
- * %GFP_NOIO - Do not do any I/O at all while trying to get memory.
- *
- * %GFP_NOFS - Do not make any fs calls while trying to get memory.
- *
- * %GFP_NOWAIT - Allocation will not sleep.
- *
- * %GFP_THISNODE - Allocate node-local memory only.
- *
- * %GFP_DMA - Allocation suitable for DMA.
- *   Should only be used for kmalloc() caches. Otherwise, use a
- *   slab created with SLAB_DMA.
- *
- * Also it is possible to set different flags by OR'ing
- * in one or more of the following additional @flags:
- *
- * %__GFP_COLD - Request cache-cold pages instead of
- *   trying to return cache-warm pages.
- *
- * %__GFP_HIGH - This allocation has high priority and may use emergency pools.
- *
- * %__GFP_NOFAIL - Indicate that this allocation is in no way allowed to fail
- *   (think twice before using).
- *
- * %__GFP_NORETRY - If memory is not immediately available,
- *   then give up at once.
- *
- * %__GFP_NOWARN - If allocation fails, don't issue any warnings.
- *
- * %__GFP_REPEAT - If allocation fails initially, try once more before failing.
- *
- * There are other flags available as well, but these are not intended
- * for general use, and so are not documented here. For a full list of
- * potential flags, always refer to linux/gfp.h.
- */
-static inline void *kmalloc_array(size_t n, size_t size, gfp_t flags)
-{
-	if (size != 0 && n > ULONG_MAX / size)
-		return NULL;
-	return __kmalloc(n * size, flags);
-}
-
-/**
- * kcalloc - allocate memory for an array. The memory is set to zero.
- * @n: number of elements.
- * @size: element size.
- * @flags: the type of memory to allocate (see kmalloc).
- */
-static inline void *kcalloc(size_t n, size_t size, gfp_t flags)
-{
-	return kmalloc_array(n, size, flags | __GFP_ZERO);
-}
-
-#if !defined(CONFIG_NUMA) && !defined(CONFIG_SLOB)
-/**
- * kmalloc_node - allocate memory from a specific node
- * @size: how many bytes of memory are required.
- * @flags: the type of memory to allocate (see kcalloc).
- * @node: node to allocate from.
- *
- * kmalloc() for non-local nodes, used to allocate from a specific node
- * if available. Equivalent to kmalloc() in the non-NUMA single-node
- * case.
- */
-static inline void *kmalloc_node(size_t size, gfp_t flags, int node)
-{
-	return kmalloc(size, flags);
-}
-
-static inline void *__kmalloc_node(size_t size, gfp_t flags, int node)
-{
-	return __kmalloc(size, flags);
-}
-
-void *kmem_cache_alloc(struct kmem_cache *, gfp_t);
-
-static inline void *kmem_cache_alloc_node(struct kmem_cache *cachep,
-					gfp_t flags, int node)
-{
-	return kmem_cache_alloc(cachep, flags);
-}
-#endif /* !CONFIG_NUMA && !CONFIG_SLOB */
-
-/*
- * kmalloc_track_caller is a special version of kmalloc that records the
- * calling function of the routine calling it for slab leak tracking instead
- * of just the calling function (confusing, eh?).
- * It's useful when the call to kmalloc comes from a widely-used standard
- * allocator where we care about the real place the memory allocation
- * request comes from.
- */
-#if defined(CONFIG_DEBUG_SLAB) || defined(CONFIG_SLUB) || \
-	(defined(CONFIG_SLAB) && defined(CONFIG_TRACING))
-extern void *__kmalloc_track_caller(size_t, gfp_t, unsigned long);
-#define kmalloc_track_caller(size, flags) \
-	__kmalloc_track_caller(size, flags, _RET_IP_)
-#else
-#define kmalloc_track_caller(size, flags) \
-	__kmalloc(size, flags)
-#endif /* DEBUG_SLAB */
-
-#ifdef CONFIG_NUMA
-/*
- * kmalloc_node_track_caller is a special version of kmalloc_node that
- * records the calling function of the routine calling it for slab leak
- * tracking instead of just the calling function (confusing, eh?).
- * It's useful when the call to kmalloc_node comes from a widely-used
- * standard allocator where we care about the real place the memory
- * allocation request comes from.
- */
-#if defined(CONFIG_DEBUG_SLAB) || defined(CONFIG_SLUB) || \
-	(defined(CONFIG_SLAB) && defined(CONFIG_TRACING))
-extern void *__kmalloc_node_track_caller(size_t, gfp_t, int, unsigned long);
-#define kmalloc_node_track_caller(size, flags, node) \
-	__kmalloc_node_track_caller(size, flags, node, \
-			_RET_IP_)
-#else
-#define kmalloc_node_track_caller(size, flags, node) \
-	__kmalloc_node(size, flags, node)
-#endif
-
-#else /* CONFIG_NUMA */
-
-#define kmalloc_node_track_caller(size, flags, node) \
-	kmalloc_track_caller(size, flags)
-
-#endif /* CONFIG_NUMA */
-
-/*
- * Shortcuts
- */
-static inline void *kmem_cache_zalloc(struct kmem_cache *k, gfp_t flags)
-{
-	return kmem_cache_alloc(k, flags | __GFP_ZERO);
-}
-
-/**
- * kzalloc - allocate memory. The memory is set to zero.
- * @size: how many bytes of memory are required.
- * @flags: the type of memory to allocate (see kmalloc).
- */
-static inline void *kzalloc(size_t size, gfp_t flags)
-{
-	return kmalloc(size, flags | __GFP_ZERO);
-}
-
-/**
- * kzalloc_node - allocate zeroed memory from a particular memory node.
- * @size: how many bytes of memory are required.
- * @flags: the type of memory to allocate (see kmalloc).
- * @node: memory node from which to allocate
- */
-static inline void *kzalloc_node(size_t size, gfp_t flags, int node)
-{
-	return kmalloc_node(size, flags | __GFP_ZERO, node);
-}
-
-void __init kmem_cache_init_late(void);
-
-#endif	/* _LINUX_SLAB_H */
diff --git a/ANDROID_3.4.5/include/linux/slab_def.h b/ANDROID_3.4.5/include/linux/slab_def.h
deleted file mode 100644
index fbd1117f..00000000
--- a/ANDROID_3.4.5/include/linux/slab_def.h
+++ /dev/null
@@ -1,215 +0,0 @@
-#ifndef _LINUX_SLAB_DEF_H
-#define	_LINUX_SLAB_DEF_H
-
-/*
- * Definitions unique to the original Linux SLAB allocator.
- *
- * What we provide here is a way to optimize the frequent kmalloc
- * calls in the kernel by selecting the appropriate general cache
- * if kmalloc was called with a size that can be established at
- * compile time.
- */
-
-#include <linux/init.h>
-#include <asm/page.h>		/* kmalloc_sizes.h needs PAGE_SIZE */
-#include <asm/cache.h>		/* kmalloc_sizes.h needs L1_CACHE_BYTES */
-#include <linux/compiler.h>
-
-/*
- * struct kmem_cache
- *
- * manages a cache.
- */
-
-struct kmem_cache {
-/* 1) Cache tunables. Protected by cache_chain_mutex */
-	unsigned int batchcount;
-	unsigned int limit;
-	unsigned int shared;
-
-	unsigned int buffer_size;
-	u32 reciprocal_buffer_size;
-/* 2) touched by every alloc & free from the backend */
-
-	unsigned int flags;		/* constant flags */
-	unsigned int num;		/* # of objs per slab */
-
-/* 3) cache_grow/shrink */
-	/* order of pgs per slab (2^n) */
-	unsigned int gfporder;
-
-	/* force GFP flags, e.g. GFP_DMA */
-	gfp_t gfpflags;
-
-	size_t colour;			/* cache colouring range */
-	unsigned int colour_off;	/* colour offset */
-	struct kmem_cache *slabp_cache;
-	unsigned int slab_size;
-	unsigned int dflags;		/* dynamic flags */
-
-	/* constructor func */
-	void (*ctor)(void *obj);
-
-/* 4) cache creation/removal */
-	const char *name;
-	struct list_head next;
-
-/* 5) statistics */
-#ifdef CONFIG_DEBUG_SLAB
-	unsigned long num_active;
-	unsigned long num_allocations;
-	unsigned long high_mark;
-	unsigned long grown;
-	unsigned long reaped;
-	unsigned long errors;
-	unsigned long max_freeable;
-	unsigned long node_allocs;
-	unsigned long node_frees;
-	unsigned long node_overflow;
-	atomic_t allochit;
-	atomic_t allocmiss;
-	atomic_t freehit;
-	atomic_t freemiss;
-
-	/*
-	 * If debugging is enabled, then the allocator can add additional
-	 * fields and/or padding to every object. buffer_size contains the total
-	 * object size including these internal fields, the following two
-	 * variables contain the offset to the user object and its size.
-	 */
-	int obj_offset;
-	int obj_size;
-#endif /* CONFIG_DEBUG_SLAB */
-
-/* 6) per-cpu/per-node data, touched during every alloc/free */
-	/*
-	 * We put array[] at the end of kmem_cache, because we want to size
-	 * this array to nr_cpu_ids slots instead of NR_CPUS
-	 * (see kmem_cache_init())
-	 * We still use [NR_CPUS] and not [1] or [0] because cache_cache
-	 * is statically defined, so we reserve the max number of cpus.
-	 */
-	struct kmem_list3 **nodelists;
-	struct array_cache *array[NR_CPUS];
-	/*
-	 * Do not add fields after array[]
-	 */
-};
-
-/* Size description struct for general caches. */
-struct cache_sizes {
-	size_t		 	cs_size;
-	struct kmem_cache	*cs_cachep;
-#ifdef CONFIG_ZONE_DMA
-	struct kmem_cache	*cs_dmacachep;
-#endif
-};
-extern struct cache_sizes malloc_sizes[];
-
-void *kmem_cache_alloc(struct kmem_cache *, gfp_t);
-void *__kmalloc(size_t size, gfp_t flags);
-
-#ifdef CONFIG_TRACING
-extern void *kmem_cache_alloc_trace(size_t size,
-				    struct kmem_cache *cachep, gfp_t flags);
-extern size_t slab_buffer_size(struct kmem_cache *cachep);
-#else
-static __always_inline void *
-kmem_cache_alloc_trace(size_t size, struct kmem_cache *cachep, gfp_t flags)
-{
-	return kmem_cache_alloc(cachep, flags);
-}
-static inline size_t slab_buffer_size(struct kmem_cache *cachep)
-{
-	return 0;
-}
-#endif
-
-static __always_inline void *kmalloc(size_t size, gfp_t flags)
-{
-	struct kmem_cache *cachep;
-	void *ret;
-
-	if (__builtin_constant_p(size)) {
-		int i = 0;
-
-		if (!size)
-			return ZERO_SIZE_PTR;
-
-#define CACHE(x) \
-		if (size <= x) \
-			goto found; \
-		else \
-			i++;
-#include <linux/kmalloc_sizes.h>
-#undef CACHE
-		return NULL;
-found:
-#ifdef CONFIG_ZONE_DMA
-		if (flags & GFP_DMA)
-			cachep = malloc_sizes[i].cs_dmacachep;
-		else
-#endif
-			cachep = malloc_sizes[i].cs_cachep;
-
-		ret = kmem_cache_alloc_trace(size, cachep, flags);
-
-		return ret;
-	}
-	return __kmalloc(size, flags);
-}
-
-#ifdef CONFIG_NUMA
-extern void *__kmalloc_node(size_t size, gfp_t flags, int node);
-extern void *kmem_cache_alloc_node(struct kmem_cache *, gfp_t flags, int node);
-
-#ifdef CONFIG_TRACING
-extern void *kmem_cache_alloc_node_trace(size_t size,
-					 struct kmem_cache *cachep,
-					 gfp_t flags,
-					 int nodeid);
-#else
-static __always_inline void *
-kmem_cache_alloc_node_trace(size_t size,
-			    struct kmem_cache *cachep,
-			    gfp_t flags,
-			    int nodeid)
-{
-	return kmem_cache_alloc_node(cachep, flags, nodeid);
-}
-#endif
-
-static __always_inline void *kmalloc_node(size_t size, gfp_t flags, int node)
-{
-	struct kmem_cache *cachep;
-
-	if (__builtin_constant_p(size)) {
-		int i = 0;
-
-		if (!size)
-			return ZERO_SIZE_PTR;
-
-#define CACHE(x) \
-		if (size <= x) \
-			goto found; \
-		else \
-			i++;
-#include <linux/kmalloc_sizes.h>
-#undef CACHE
-		return NULL;
-found:
-#ifdef CONFIG_ZONE_DMA
-		if (flags & GFP_DMA)
-			cachep = malloc_sizes[i].cs_dmacachep;
-		else
-#endif
-			cachep = malloc_sizes[i].cs_cachep;
-
-		return kmem_cache_alloc_node_trace(size, cachep, flags, node);
-	}
-	return __kmalloc_node(size, flags, node);
-}
-
-#endif	/* CONFIG_NUMA */
-
-#endif	/* _LINUX_SLAB_DEF_H */
diff --git a/ANDROID_3.4.5/include/linux/slob_def.h b/ANDROID_3.4.5/include/linux/slob_def.h
deleted file mode 100644
index 0ec00b39..00000000
--- a/ANDROID_3.4.5/include/linux/slob_def.h
+++ /dev/null
@@ -1,37 +0,0 @@
-#ifndef __LINUX_SLOB_DEF_H
-#define __LINUX_SLOB_DEF_H
-
-void *kmem_cache_alloc_node(struct kmem_cache *, gfp_t flags, int node);
-
-static __always_inline void *kmem_cache_alloc(struct kmem_cache *cachep,
-					      gfp_t flags)
-{
-	return kmem_cache_alloc_node(cachep, flags, -1);
-}
-
-void *__kmalloc_node(size_t size, gfp_t flags, int node);
-
-static __always_inline void *kmalloc_node(size_t size, gfp_t flags, int node)
-{
-	return __kmalloc_node(size, flags, node);
-}
-
-/**
- * kmalloc - allocate memory
- * @size: how many bytes of memory are required.
- * @flags: the type of memory to allocate (see kcalloc).
- *
- * kmalloc is the normal method of allocating memory
- * in the kernel.
- */
-static __always_inline void *kmalloc(size_t size, gfp_t flags)
-{
-	return __kmalloc_node(size, flags, -1);
-}
-
-static __always_inline void *__kmalloc(size_t size, gfp_t flags)
-{
-	return kmalloc(size, flags);
-}
-
-#endif /* __LINUX_SLOB_DEF_H */
diff --git a/ANDROID_3.4.5/include/linux/slub_def.h b/ANDROID_3.4.5/include/linux/slub_def.h
deleted file mode 100644
index c2f8c8bc..00000000
--- a/ANDROID_3.4.5/include/linux/slub_def.h
+++ /dev/null
@@ -1,319 +0,0 @@
-#ifndef _LINUX_SLUB_DEF_H
-#define _LINUX_SLUB_DEF_H
-
-/*
- * SLUB : A Slab allocator without object queues.
- *
- * (C) 2007 SGI, Christoph Lameter
- */
-#include <linux/types.h>
-#include <linux/gfp.h>
-#include <linux/bug.h>
-#include <linux/workqueue.h>
-#include <linux/kobject.h>
-
-#include <linux/kmemleak.h>
-
-enum stat_item {
-	ALLOC_FASTPATH,		/* Allocation from cpu slab */
-	ALLOC_SLOWPATH,		/* Allocation by getting a new cpu slab */
-	FREE_FASTPATH,		/* Free to cpu slub */
-	FREE_SLOWPATH,		/* Freeing not to cpu slab */
-	FREE_FROZEN,		/* Freeing to frozen slab */
-	FREE_ADD_PARTIAL,	/* Freeing moves slab to partial list */
-	FREE_REMOVE_PARTIAL,	/* Freeing removes last object */
-	ALLOC_FROM_PARTIAL,	/* Cpu slab acquired from node partial list */
-	ALLOC_SLAB,		/* Cpu slab acquired from page allocator */
-	ALLOC_REFILL,		/* Refill cpu slab from slab freelist */
-	ALLOC_NODE_MISMATCH,	/* Switching cpu slab */
-	FREE_SLAB,		/* Slab freed to the page allocator */
-	CPUSLAB_FLUSH,		/* Abandoning of the cpu slab */
-	DEACTIVATE_FULL,	/* Cpu slab was full when deactivated */
-	DEACTIVATE_EMPTY,	/* Cpu slab was empty when deactivated */
-	DEACTIVATE_TO_HEAD,	/* Cpu slab was moved to the head of partials */
-	DEACTIVATE_TO_TAIL,	/* Cpu slab was moved to the tail of partials */
-	DEACTIVATE_REMOTE_FREES,/* Slab contained remotely freed objects */
-	DEACTIVATE_BYPASS,	/* Implicit deactivation */
-	ORDER_FALLBACK,		/* Number of times fallback was necessary */
-	CMPXCHG_DOUBLE_CPU_FAIL,/* Failure of this_cpu_cmpxchg_double */
-	CMPXCHG_DOUBLE_FAIL,	/* Number of times that cmpxchg double did not match */
-	CPU_PARTIAL_ALLOC,	/* Used cpu partial on alloc */
-	CPU_PARTIAL_FREE,	/* Refill cpu partial on free */
-	CPU_PARTIAL_NODE,	/* Refill cpu partial from node partial */
-	CPU_PARTIAL_DRAIN,	/* Drain cpu partial to node partial */
-	NR_SLUB_STAT_ITEMS };
-
-struct kmem_cache_cpu {
-	void **freelist;	/* Pointer to next available object */
-	unsigned long tid;	/* Globally unique transaction id */
-	struct page *page;	/* The slab from which we are allocating */
-	struct page *partial;	/* Partially allocated frozen slabs */
-	int node;		/* The node of the page (or -1 for debug) */
-#ifdef CONFIG_SLUB_STATS
-	unsigned stat[NR_SLUB_STAT_ITEMS];
-#endif
-};
-
-struct kmem_cache_node {
-	spinlock_t list_lock;	/* Protect partial list and nr_partial */
-	unsigned long nr_partial;
-	struct list_head partial;
-#ifdef CONFIG_SLUB_DEBUG
-	atomic_long_t nr_slabs;
-	atomic_long_t total_objects;
-	struct list_head full;
-#endif
-};
-
-/*
- * Word size structure that can be atomically updated or read and that
- * contains both the order and the number of objects that a slab of the
- * given order would contain.
- */
-struct kmem_cache_order_objects {
-	unsigned long x;
-};
-
-/*
- * Slab cache management.
- */
-struct kmem_cache {
-	struct kmem_cache_cpu __percpu *cpu_slab;
-	/* Used for retriving partial slabs etc */
-	unsigned long flags;
-	unsigned long min_partial;
-	int size;		/* The size of an object including meta data */
-	int objsize;		/* The size of an object without meta data */
-	int offset;		/* Free pointer offset. */
-	int cpu_partial;	/* Number of per cpu partial objects to keep around */
-	struct kmem_cache_order_objects oo;
-
-	/* Allocation and freeing of slabs */
-	struct kmem_cache_order_objects max;
-	struct kmem_cache_order_objects min;
-	gfp_t allocflags;	/* gfp flags to use on each alloc */
-	int refcount;		/* Refcount for slab cache destroy */
-	void (*ctor)(void *);
-	int inuse;		/* Offset to metadata */
-	int align;		/* Alignment */
-	int reserved;		/* Reserved bytes at the end of slabs */
-	const char *name;	/* Name (only for display!) */
-	struct list_head list;	/* List of slab caches */
-#ifdef CONFIG_SYSFS
-	struct kobject kobj;	/* For sysfs */
-#endif
-
-#ifdef CONFIG_NUMA
-	/*
-	 * Defragmentation by allocating from a remote node.
-	 */
-	int remote_node_defrag_ratio;
-#endif
-	struct kmem_cache_node *node[MAX_NUMNODES];
-};
-
-/*
- * Kmalloc subsystem.
- */
-#if defined(ARCH_DMA_MINALIGN) && ARCH_DMA_MINALIGN > 8
-#define KMALLOC_MIN_SIZE ARCH_DMA_MINALIGN
-#else
-#define KMALLOC_MIN_SIZE 8
-#endif
-
-#define KMALLOC_SHIFT_LOW ilog2(KMALLOC_MIN_SIZE)
-
-/*
- * Maximum kmalloc object size handled by SLUB. Larger object allocations
- * are passed through to the page allocator. The page allocator "fastpath"
- * is relatively slow so we need this value sufficiently high so that
- * performance critical objects are allocated through the SLUB fastpath.
- *
- * This should be dropped to PAGE_SIZE / 2 once the page allocator
- * "fastpath" becomes competitive with the slab allocator fastpaths.
- */
-#define SLUB_MAX_SIZE (2 * PAGE_SIZE)
-
-#define SLUB_PAGE_SHIFT (PAGE_SHIFT + 2)
-
-#ifdef CONFIG_ZONE_DMA
-#define SLUB_DMA __GFP_DMA
-#else
-/* Disable DMA functionality */
-#define SLUB_DMA (__force gfp_t)0
-#endif
-
-/*
- * We keep the general caches in an array of slab caches that are used for
- * 2^x bytes of allocations.
- */
-extern struct kmem_cache *kmalloc_caches[SLUB_PAGE_SHIFT];
-
-/*
- * Sorry that the following has to be that ugly but some versions of GCC
- * have trouble with constant propagation and loops.
- */
-static __always_inline int kmalloc_index(size_t size)
-{
-	if (!size)
-		return 0;
-
-	if (size <= KMALLOC_MIN_SIZE)
-		return KMALLOC_SHIFT_LOW;
-
-	if (KMALLOC_MIN_SIZE <= 32 && size > 64 && size <= 96)
-		return 1;
-	if (KMALLOC_MIN_SIZE <= 64 && size > 128 && size <= 192)
-		return 2;
-	if (size <=          8) return 3;
-	if (size <=         16) return 4;
-	if (size <=         32) return 5;
-	if (size <=         64) return 6;
-	if (size <=        128) return 7;
-	if (size <=        256) return 8;
-	if (size <=        512) return 9;
-	if (size <=       1024) return 10;
-	if (size <=   2 * 1024) return 11;
-	if (size <=   4 * 1024) return 12;
-/*
- * The following is only needed to support architectures with a larger page
- * size than 4k. We need to support 2 * PAGE_SIZE here. So for a 64k page
- * size we would have to go up to 128k.
- */
-	if (size <=   8 * 1024) return 13;
-	if (size <=  16 * 1024) return 14;
-	if (size <=  32 * 1024) return 15;
-	if (size <=  64 * 1024) return 16;
-	if (size <= 128 * 1024) return 17;
-	if (size <= 256 * 1024) return 18;
-	if (size <= 512 * 1024) return 19;
-	if (size <= 1024 * 1024) return 20;
-	if (size <=  2 * 1024 * 1024) return 21;
-	BUG();
-	return -1; /* Will never be reached */
-
-/*
- * What we really wanted to do and cannot do because of compiler issues is:
- *	int i;
- *	for (i = KMALLOC_SHIFT_LOW; i <= KMALLOC_SHIFT_HIGH; i++)
- *		if (size <= (1 << i))
- *			return i;
- */
-}
-
-/*
- * Find the slab cache for a given combination of allocation flags and size.
- *
- * This ought to end up with a global pointer to the right cache
- * in kmalloc_caches.
- */
-static __always_inline struct kmem_cache *kmalloc_slab(size_t size)
-{
-	int index = kmalloc_index(size);
-
-	if (index == 0)
-		return NULL;
-
-	return kmalloc_caches[index];
-}
-
-void *kmem_cache_alloc(struct kmem_cache *, gfp_t);
-void *__kmalloc(size_t size, gfp_t flags);
-
-static __always_inline void *
-kmalloc_order(size_t size, gfp_t flags, unsigned int order)
-{
-	void *ret = (void *) __get_free_pages(flags | __GFP_COMP, order);
-	kmemleak_alloc(ret, size, 1, flags);
-	return ret;
-}
-
-/**
- * Calling this on allocated memory will check that the memory
- * is expected to be in use, and print warnings if not.
- */
-#ifdef CONFIG_SLUB_DEBUG
-extern bool verify_mem_not_deleted(const void *x);
-#else
-static inline bool verify_mem_not_deleted(const void *x)
-{
-	return true;
-}
-#endif
-
-#ifdef CONFIG_TRACING
-extern void *
-kmem_cache_alloc_trace(struct kmem_cache *s, gfp_t gfpflags, size_t size);
-extern void *kmalloc_order_trace(size_t size, gfp_t flags, unsigned int order);
-#else
-static __always_inline void *
-kmem_cache_alloc_trace(struct kmem_cache *s, gfp_t gfpflags, size_t size)
-{
-	return kmem_cache_alloc(s, gfpflags);
-}
-
-static __always_inline void *
-kmalloc_order_trace(size_t size, gfp_t flags, unsigned int order)
-{
-	return kmalloc_order(size, flags, order);
-}
-#endif
-
-static __always_inline void *kmalloc_large(size_t size, gfp_t flags)
-{
-	unsigned int order = get_order(size);
-	return kmalloc_order_trace(size, flags, order);
-}
-
-static __always_inline void *kmalloc(size_t size, gfp_t flags)
-{
-	if (__builtin_constant_p(size)) {
-		if (size > SLUB_MAX_SIZE)
-			return kmalloc_large(size, flags);
-
-		if (!(flags & SLUB_DMA)) {
-			struct kmem_cache *s = kmalloc_slab(size);
-
-			if (!s)
-				return ZERO_SIZE_PTR;
-
-			return kmem_cache_alloc_trace(s, flags, size);
-		}
-	}
-	return __kmalloc(size, flags);
-}
-
-#ifdef CONFIG_NUMA
-void *__kmalloc_node(size_t size, gfp_t flags, int node);
-void *kmem_cache_alloc_node(struct kmem_cache *, gfp_t flags, int node);
-
-#ifdef CONFIG_TRACING
-extern void *kmem_cache_alloc_node_trace(struct kmem_cache *s,
-					   gfp_t gfpflags,
-					   int node, size_t size);
-#else
-static __always_inline void *
-kmem_cache_alloc_node_trace(struct kmem_cache *s,
-			      gfp_t gfpflags,
-			      int node, size_t size)
-{
-	return kmem_cache_alloc_node(s, gfpflags, node);
-}
-#endif
-
-static __always_inline void *kmalloc_node(size_t size, gfp_t flags, int node)
-{
-	if (__builtin_constant_p(size) &&
-		size <= SLUB_MAX_SIZE && !(flags & SLUB_DMA)) {
-			struct kmem_cache *s = kmalloc_slab(size);
-
-		if (!s)
-			return ZERO_SIZE_PTR;
-
-		return kmem_cache_alloc_node_trace(s, flags, node, size);
-	}
-	return __kmalloc_node(size, flags, node);
-}
-#endif
-
-#endif /* _LINUX_SLUB_DEF_H */
diff --git a/ANDROID_3.4.5/include/linux/sm501-regs.h b/ANDROID_3.4.5/include/linux/sm501-regs.h
deleted file mode 100644
index 67ed2c54..00000000
--- a/ANDROID_3.4.5/include/linux/sm501-regs.h
+++ /dev/null
@@ -1,388 +0,0 @@
-/* sm501-regs.h
- *
- * Copyright 2006 Simtec Electronics
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Silicon Motion SM501 register definitions
-*/
-
-/* System Configuration area */
-/* System config base */
-#define SM501_SYS_CONFIG		(0x000000)
-
-/* config 1 */
-#define SM501_SYSTEM_CONTROL 		(0x000000)
-
-#define SM501_SYSCTRL_PANEL_TRISTATE	(1<<0)
-#define SM501_SYSCTRL_MEM_TRISTATE	(1<<1)
-#define SM501_SYSCTRL_CRT_TRISTATE	(1<<2)
-
-#define SM501_SYSCTRL_PCI_SLAVE_BURST_MASK (3<<4)
-#define SM501_SYSCTRL_PCI_SLAVE_BURST_1	(0<<4)
-#define SM501_SYSCTRL_PCI_SLAVE_BURST_2	(1<<4)
-#define SM501_SYSCTRL_PCI_SLAVE_BURST_4	(2<<4)
-#define SM501_SYSCTRL_PCI_SLAVE_BURST_8	(3<<4)
-
-#define SM501_SYSCTRL_PCI_CLOCK_RUN_EN	(1<<6)
-#define SM501_SYSCTRL_PCI_RETRY_DISABLE	(1<<7)
-#define SM501_SYSCTRL_PCI_SUBSYS_LOCK	(1<<11)
-#define SM501_SYSCTRL_PCI_BURST_READ_EN	(1<<15)
-
-#define SM501_SYSCTRL_2D_ENGINE_STATUS	(1<<19)
-
-/* miscellaneous control */
-
-#define SM501_MISC_CONTROL		(0x000004)
-
-#define SM501_MISC_BUS_SH		(0x0)
-#define SM501_MISC_BUS_PCI		(0x1)
-#define SM501_MISC_BUS_XSCALE		(0x2)
-#define SM501_MISC_BUS_NEC		(0x6)
-#define SM501_MISC_BUS_MASK		(0x7)
-
-#define SM501_MISC_VR_62MB		(1<<3)
-#define SM501_MISC_CDR_RESET		(1<<7)
-#define SM501_MISC_USB_LB		(1<<8)
-#define SM501_MISC_USB_SLAVE		(1<<9)
-#define SM501_MISC_BL_1			(1<<10)
-#define SM501_MISC_MC			(1<<11)
-#define SM501_MISC_DAC_POWER		(1<<12)
-#define SM501_MISC_IRQ_INVERT		(1<<16)
-#define SM501_MISC_SH			(1<<17)
-
-#define SM501_MISC_HOLD_EMPTY		(0<<18)
-#define SM501_MISC_HOLD_8		(1<<18)
-#define SM501_MISC_HOLD_16		(2<<18)
-#define SM501_MISC_HOLD_24		(3<<18)
-#define SM501_MISC_HOLD_32		(4<<18)
-#define SM501_MISC_HOLD_MASK		(7<<18)
-
-#define SM501_MISC_FREQ_12		(1<<24)
-#define SM501_MISC_PNL_24BIT		(1<<25)
-#define SM501_MISC_8051_LE		(1<<26)
-
-
-
-#define SM501_GPIO31_0_CONTROL		(0x000008)
-#define SM501_GPIO63_32_CONTROL		(0x00000C)
-#define SM501_DRAM_CONTROL		(0x000010)
-
-/* command list */
-#define SM501_ARBTRTN_CONTROL		(0x000014)
-
-/* command list */
-#define SM501_COMMAND_LIST_STATUS	(0x000024)
-
-/* interrupt debug */
-#define SM501_RAW_IRQ_STATUS		(0x000028)
-#define SM501_RAW_IRQ_CLEAR		(0x000028)
-#define SM501_IRQ_STATUS		(0x00002C)
-#define SM501_IRQ_MASK			(0x000030)
-#define SM501_DEBUG_CONTROL		(0x000034)
-
-/* power management */
-#define SM501_POWERMODE_P2X_SRC		(1<<29)
-#define SM501_POWERMODE_V2X_SRC		(1<<20)
-#define SM501_POWERMODE_M_SRC		(1<<12)
-#define SM501_POWERMODE_M1_SRC		(1<<4)
-
-#define SM501_CURRENT_GATE		(0x000038)
-#define SM501_CURRENT_CLOCK		(0x00003C)
-#define SM501_POWER_MODE_0_GATE		(0x000040)
-#define SM501_POWER_MODE_0_CLOCK	(0x000044)
-#define SM501_POWER_MODE_1_GATE		(0x000048)
-#define SM501_POWER_MODE_1_CLOCK	(0x00004C)
-#define SM501_SLEEP_MODE_GATE		(0x000050)
-#define SM501_POWER_MODE_CONTROL	(0x000054)
-
-/* power gates for units within the 501 */
-#define SM501_GATE_HOST			(0)
-#define SM501_GATE_MEMORY		(1)
-#define SM501_GATE_DISPLAY		(2)
-#define SM501_GATE_2D_ENGINE		(3)
-#define SM501_GATE_CSC			(4)
-#define SM501_GATE_ZVPORT		(5)
-#define SM501_GATE_GPIO			(6)
-#define SM501_GATE_UART0		(7)
-#define SM501_GATE_UART1		(8)
-#define SM501_GATE_SSP			(10)
-#define SM501_GATE_USB_HOST		(11)
-#define SM501_GATE_USB_GADGET		(12)
-#define SM501_GATE_UCONTROLLER		(17)
-#define SM501_GATE_AC97			(18)
-
-/* panel clock */
-#define SM501_CLOCK_P2XCLK		(24)
-/* crt clock */
-#define SM501_CLOCK_V2XCLK		(16)
-/* main clock */
-#define SM501_CLOCK_MCLK		(8)
-/* SDRAM controller clock */
-#define SM501_CLOCK_M1XCLK		(0)
-
-/* config 2 */
-#define SM501_PCI_MASTER_BASE		(0x000058)
-#define SM501_ENDIAN_CONTROL		(0x00005C)
-#define SM501_DEVICEID			(0x000060)
-/* 0x050100A0 */
-
-#define SM501_DEVICEID_SM501		(0x05010000)
-#define SM501_DEVICEID_IDMASK		(0xffff0000)
-#define SM501_DEVICEID_REVMASK		(0x000000ff)
-
-#define SM501_PLLCLOCK_COUNT		(0x000064)
-#define SM501_MISC_TIMING		(0x000068)
-#define SM501_CURRENT_SDRAM_CLOCK	(0x00006C)
-
-#define SM501_PROGRAMMABLE_PLL_CONTROL	(0x000074)
-
-/* GPIO base */
-#define SM501_GPIO			(0x010000)
-#define SM501_GPIO_DATA_LOW		(0x00)
-#define SM501_GPIO_DATA_HIGH		(0x04)
-#define SM501_GPIO_DDR_LOW		(0x08)
-#define SM501_GPIO_DDR_HIGH		(0x0C)
-#define SM501_GPIO_IRQ_SETUP		(0x10)
-#define SM501_GPIO_IRQ_STATUS		(0x14)
-#define SM501_GPIO_IRQ_RESET		(0x14)
-
-/* I2C controller base */
-#define SM501_I2C			(0x010040)
-#define SM501_I2C_BYTE_COUNT		(0x00)
-#define SM501_I2C_CONTROL		(0x01)
-#define SM501_I2C_STATUS		(0x02)
-#define SM501_I2C_RESET			(0x02)
-#define SM501_I2C_SLAVE_ADDRESS		(0x03)
-#define SM501_I2C_DATA			(0x04)
-
-/* SSP base */
-#define SM501_SSP			(0x020000)
-
-/* Uart 0 base */
-#define SM501_UART0			(0x030000)
-
-/* Uart 1 base */
-#define SM501_UART1			(0x030020)
-
-/* USB host port base */
-#define SM501_USB_HOST			(0x040000)
-
-/* USB slave/gadget base */
-#define SM501_USB_GADGET		(0x060000)
-
-/* USB slave/gadget data port base */
-#define SM501_USB_GADGET_DATA		(0x070000)
-
-/* Display controller/video engine base */
-#define SM501_DC			(0x080000)
-
-/* common defines for the SM501 address registers */
-#define SM501_ADDR_FLIP			(1<<31)
-#define SM501_ADDR_EXT			(1<<27)
-#define SM501_ADDR_CS1			(1<<26)
-#define SM501_ADDR_MASK			(0x3f << 26)
-
-#define SM501_FIFO_MASK			(0x3 << 16)
-#define SM501_FIFO_1			(0x0 << 16)
-#define SM501_FIFO_3			(0x1 << 16)
-#define SM501_FIFO_7			(0x2 << 16)
-#define SM501_FIFO_11			(0x3 << 16)
-
-/* common registers for panel and the crt */
-#define SM501_OFF_DC_H_TOT		(0x000)
-#define SM501_OFF_DC_V_TOT		(0x008)
-#define SM501_OFF_DC_H_SYNC		(0x004)
-#define SM501_OFF_DC_V_SYNC		(0x00C)
-
-#define SM501_DC_PANEL_CONTROL		(0x000)
-
-#define SM501_DC_PANEL_CONTROL_FPEN	(1<<27)
-#define SM501_DC_PANEL_CONTROL_BIAS	(1<<26)
-#define SM501_DC_PANEL_CONTROL_DATA	(1<<25)
-#define SM501_DC_PANEL_CONTROL_VDD	(1<<24)
-#define SM501_DC_PANEL_CONTROL_DP	(1<<23)
-
-#define SM501_DC_PANEL_CONTROL_TFT_888	(0<<21)
-#define SM501_DC_PANEL_CONTROL_TFT_333	(1<<21)
-#define SM501_DC_PANEL_CONTROL_TFT_444	(2<<21)
-
-#define SM501_DC_PANEL_CONTROL_DE	(1<<20)
-
-#define SM501_DC_PANEL_CONTROL_LCD_TFT	(0<<18)
-#define SM501_DC_PANEL_CONTROL_LCD_STN8	(1<<18)
-#define SM501_DC_PANEL_CONTROL_LCD_STN12 (2<<18)
-
-#define SM501_DC_PANEL_CONTROL_CP	(1<<14)
-#define SM501_DC_PANEL_CONTROL_VSP	(1<<13)
-#define SM501_DC_PANEL_CONTROL_HSP	(1<<12)
-#define SM501_DC_PANEL_CONTROL_CK	(1<<9)
-#define SM501_DC_PANEL_CONTROL_TE	(1<<8)
-#define SM501_DC_PANEL_CONTROL_VPD	(1<<7)
-#define SM501_DC_PANEL_CONTROL_VP	(1<<6)
-#define SM501_DC_PANEL_CONTROL_HPD	(1<<5)
-#define SM501_DC_PANEL_CONTROL_HP	(1<<4)
-#define SM501_DC_PANEL_CONTROL_GAMMA	(1<<3)
-#define SM501_DC_PANEL_CONTROL_EN	(1<<2)
-
-#define SM501_DC_PANEL_CONTROL_8BPP	(0<<0)
-#define SM501_DC_PANEL_CONTROL_16BPP	(1<<0)
-#define SM501_DC_PANEL_CONTROL_32BPP	(2<<0)
-
-
-#define SM501_DC_PANEL_PANNING_CONTROL	(0x004)
-#define SM501_DC_PANEL_COLOR_KEY	(0x008)
-#define SM501_DC_PANEL_FB_ADDR		(0x00C)
-#define SM501_DC_PANEL_FB_OFFSET	(0x010)
-#define SM501_DC_PANEL_FB_WIDTH		(0x014)
-#define SM501_DC_PANEL_FB_HEIGHT	(0x018)
-#define SM501_DC_PANEL_TL_LOC		(0x01C)
-#define SM501_DC_PANEL_BR_LOC		(0x020)
-#define SM501_DC_PANEL_H_TOT		(0x024)
-#define SM501_DC_PANEL_H_SYNC		(0x028)
-#define SM501_DC_PANEL_V_TOT		(0x02C)
-#define SM501_DC_PANEL_V_SYNC		(0x030)
-#define SM501_DC_PANEL_CUR_LINE		(0x034)
-
-#define SM501_DC_VIDEO_CONTROL		(0x040)
-#define SM501_DC_VIDEO_FB0_ADDR		(0x044)
-#define SM501_DC_VIDEO_FB_WIDTH		(0x048)
-#define SM501_DC_VIDEO_FB0_LAST_ADDR	(0x04C)
-#define SM501_DC_VIDEO_TL_LOC		(0x050)
-#define SM501_DC_VIDEO_BR_LOC		(0x054)
-#define SM501_DC_VIDEO_SCALE		(0x058)
-#define SM501_DC_VIDEO_INIT_SCALE	(0x05C)
-#define SM501_DC_VIDEO_YUV_CONSTANTS	(0x060)
-#define SM501_DC_VIDEO_FB1_ADDR		(0x064)
-#define SM501_DC_VIDEO_FB1_LAST_ADDR	(0x068)
-
-#define SM501_DC_VIDEO_ALPHA_CONTROL	(0x080)
-#define SM501_DC_VIDEO_ALPHA_FB_ADDR	(0x084)
-#define SM501_DC_VIDEO_ALPHA_FB_OFFSET	(0x088)
-#define SM501_DC_VIDEO_ALPHA_FB_LAST_ADDR	(0x08C)
-#define SM501_DC_VIDEO_ALPHA_TL_LOC	(0x090)
-#define SM501_DC_VIDEO_ALPHA_BR_LOC	(0x094)
-#define SM501_DC_VIDEO_ALPHA_SCALE	(0x098)
-#define SM501_DC_VIDEO_ALPHA_INIT_SCALE	(0x09C)
-#define SM501_DC_VIDEO_ALPHA_CHROMA_KEY	(0x0A0)
-#define SM501_DC_VIDEO_ALPHA_COLOR_LOOKUP	(0x0A4)
-
-#define SM501_DC_PANEL_HWC_BASE		(0x0F0)
-#define SM501_DC_PANEL_HWC_ADDR		(0x0F0)
-#define SM501_DC_PANEL_HWC_LOC		(0x0F4)
-#define SM501_DC_PANEL_HWC_COLOR_1_2	(0x0F8)
-#define SM501_DC_PANEL_HWC_COLOR_3	(0x0FC)
-
-#define SM501_HWC_EN			(1<<31)
-
-#define SM501_OFF_HWC_ADDR		(0x00)
-#define SM501_OFF_HWC_LOC		(0x04)
-#define SM501_OFF_HWC_COLOR_1_2		(0x08)
-#define SM501_OFF_HWC_COLOR_3		(0x0C)
-
-#define SM501_DC_ALPHA_CONTROL		(0x100)
-#define SM501_DC_ALPHA_FB_ADDR		(0x104)
-#define SM501_DC_ALPHA_FB_OFFSET	(0x108)
-#define SM501_DC_ALPHA_TL_LOC		(0x10C)
-#define SM501_DC_ALPHA_BR_LOC		(0x110)
-#define SM501_DC_ALPHA_CHROMA_KEY	(0x114)
-#define SM501_DC_ALPHA_COLOR_LOOKUP	(0x118)
-
-#define SM501_DC_CRT_CONTROL		(0x200)
-
-#define SM501_DC_CRT_CONTROL_TVP	(1<<15)
-#define SM501_DC_CRT_CONTROL_CP		(1<<14)
-#define SM501_DC_CRT_CONTROL_VSP	(1<<13)
-#define SM501_DC_CRT_CONTROL_HSP	(1<<12)
-#define SM501_DC_CRT_CONTROL_VS		(1<<11)
-#define SM501_DC_CRT_CONTROL_BLANK	(1<<10)
-#define SM501_DC_CRT_CONTROL_SEL	(1<<9)
-#define SM501_DC_CRT_CONTROL_TE		(1<<8)
-#define SM501_DC_CRT_CONTROL_PIXEL_MASK (0xF << 4)
-#define SM501_DC_CRT_CONTROL_GAMMA	(1<<3)
-#define SM501_DC_CRT_CONTROL_ENABLE	(1<<2)
-
-#define SM501_DC_CRT_CONTROL_8BPP	(0<<0)
-#define SM501_DC_CRT_CONTROL_16BPP	(1<<0)
-#define SM501_DC_CRT_CONTROL_32BPP	(2<<0)
-
-#define SM501_DC_CRT_FB_ADDR		(0x204)
-#define SM501_DC_CRT_FB_OFFSET		(0x208)
-#define SM501_DC_CRT_H_TOT		(0x20C)
-#define SM501_DC_CRT_H_SYNC		(0x210)
-#define SM501_DC_CRT_V_TOT		(0x214)
-#define SM501_DC_CRT_V_SYNC		(0x218)
-#define SM501_DC_CRT_SIGNATURE_ANALYZER	(0x21C)
-#define SM501_DC_CRT_CUR_LINE		(0x220)
-#define SM501_DC_CRT_MONITOR_DETECT	(0x224)
-
-#define SM501_DC_CRT_HWC_BASE		(0x230)
-#define SM501_DC_CRT_HWC_ADDR		(0x230)
-#define SM501_DC_CRT_HWC_LOC		(0x234)
-#define SM501_DC_CRT_HWC_COLOR_1_2	(0x238)
-#define SM501_DC_CRT_HWC_COLOR_3	(0x23C)
-
-#define SM501_DC_PANEL_PALETTE		(0x400)
-
-#define SM501_DC_VIDEO_PALETTE		(0x800)
-
-#define SM501_DC_CRT_PALETTE		(0xC00)
-
-/* Zoom Video port base */
-#define SM501_ZVPORT			(0x090000)
-
-/* AC97/I2S base */
-#define SM501_AC97			(0x0A0000)
-
-/* 8051 micro controller base */
-#define SM501_UCONTROLLER		(0x0B0000)
-
-/* 8051 micro controller SRAM base */
-#define SM501_UCONTROLLER_SRAM		(0x0C0000)
-
-/* DMA base */
-#define SM501_DMA			(0x0D0000)
-
-/* 2d engine base */
-#define SM501_2D_ENGINE			(0x100000)
-#define SM501_2D_SOURCE			(0x00)
-#define SM501_2D_DESTINATION		(0x04)
-#define SM501_2D_DIMENSION		(0x08)
-#define SM501_2D_CONTROL		(0x0C)
-#define SM501_2D_PITCH			(0x10)
-#define SM501_2D_FOREGROUND		(0x14)
-#define SM501_2D_BACKGROUND		(0x18)
-#define SM501_2D_STRETCH		(0x1C)
-#define SM501_2D_COLOR_COMPARE		(0x20)
-#define SM501_2D_COLOR_COMPARE_MASK 	(0x24)
-#define SM501_2D_MASK			(0x28)
-#define SM501_2D_CLIP_TL		(0x2C)
-#define SM501_2D_CLIP_BR		(0x30)
-#define SM501_2D_MONO_PATTERN_LOW	(0x34)
-#define SM501_2D_MONO_PATTERN_HIGH	(0x38)
-#define SM501_2D_WINDOW_WIDTH		(0x3C)
-#define SM501_2D_SOURCE_BASE		(0x40)
-#define SM501_2D_DESTINATION_BASE	(0x44)
-#define SM501_2D_ALPHA			(0x48)
-#define SM501_2D_WRAP			(0x4C)
-#define SM501_2D_STATUS			(0x50)
-
-#define SM501_CSC_Y_SOURCE_BASE		(0xC8)
-#define SM501_CSC_CONSTANTS		(0xCC)
-#define SM501_CSC_Y_SOURCE_X		(0xD0)
-#define SM501_CSC_Y_SOURCE_Y		(0xD4)
-#define SM501_CSC_U_SOURCE_BASE		(0xD8)
-#define SM501_CSC_V_SOURCE_BASE		(0xDC)
-#define SM501_CSC_SOURCE_DIMENSION	(0xE0)
-#define SM501_CSC_SOURCE_PITCH		(0xE4)
-#define SM501_CSC_DESTINATION		(0xE8)
-#define SM501_CSC_DESTINATION_DIMENSION	(0xEC)
-#define SM501_CSC_DESTINATION_PITCH	(0xF0)
-#define SM501_CSC_SCALE_FACTOR		(0xF4)
-#define SM501_CSC_DESTINATION_BASE	(0xF8)
-#define SM501_CSC_CONTROL		(0xFC)
-
-/* 2d engine data port base */
-#define SM501_2D_ENGINE_DATA		(0x110000)
diff --git a/ANDROID_3.4.5/include/linux/sm501.h b/ANDROID_3.4.5/include/linux/sm501.h
deleted file mode 100644
index 02fde50a..00000000
--- a/ANDROID_3.4.5/include/linux/sm501.h
+++ /dev/null
@@ -1,182 +0,0 @@
-/* include/linux/sm501.h
- *
- * Copyright (c) 2006 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	Vincent Sanders <vince@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-*/
-
-extern int sm501_unit_power(struct device *dev,
-			    unsigned int unit, unsigned int to);
-
-extern unsigned long sm501_set_clock(struct device *dev,
-				     int clksrc, unsigned long freq);
-
-extern unsigned long sm501_find_clock(struct device *dev,
-				      int clksrc, unsigned long req_freq);
-
-/* sm501_misc_control
- *
- * Modify the SM501's MISC_CONTROL register
-*/
-
-extern int sm501_misc_control(struct device *dev,
-			      unsigned long set, unsigned long clear);
-
-/* sm501_modify_reg
- *
- * Modify a register in the SM501 which may be shared with other
- * drivers.
-*/
-
-extern unsigned long sm501_modify_reg(struct device *dev,
-				      unsigned long reg,
-				      unsigned long set,
-				      unsigned long clear);
-
-
-/* Platform data definitions */
-
-#define SM501FB_FLAG_USE_INIT_MODE	(1<<0)
-#define SM501FB_FLAG_DISABLE_AT_EXIT	(1<<1)
-#define SM501FB_FLAG_USE_HWCURSOR	(1<<2)
-#define SM501FB_FLAG_USE_HWACCEL	(1<<3)
-#define SM501FB_FLAG_PANEL_NO_FPEN	(1<<4)
-#define SM501FB_FLAG_PANEL_NO_VBIASEN	(1<<5)
-#define SM501FB_FLAG_PANEL_INV_FPEN	(1<<6)
-#define SM501FB_FLAG_PANEL_INV_VBIASEN	(1<<7)
-
-struct sm501_platdata_fbsub {
-	struct fb_videomode	*def_mode;
-	unsigned int		 def_bpp;
-	unsigned long		 max_mem;
-	unsigned int		 flags;
-};
-
-enum sm501_fb_routing {
-	SM501_FB_OWN		= 0,	/* CRT=>CRT, Panel=>Panel */
-	SM501_FB_CRT_PANEL	= 1,	/* Panel=>CRT, Panel=>Panel */
-};
-
-/* sm501_platdata_fb flag field bit definitions */
-
-#define SM501_FBPD_SWAP_FB_ENDIAN	(1<<0)	/* need to endian swap */
-
-/* sm501_platdata_fb
- *
- * configuration data for the framebuffer driver
-*/
-
-struct sm501_platdata_fb {
-	enum sm501_fb_routing		 fb_route;
-	unsigned int			 flags;
-	struct sm501_platdata_fbsub	*fb_crt;
-	struct sm501_platdata_fbsub	*fb_pnl;
-};
-
-/* gpio i2c
- *
- * Note, we have to pass in the bus number, as the number used will be
- * passed to the i2c-gpio driver's platform_device.id, subsequently used
- * to register the i2c bus.
-*/
-
-struct sm501_platdata_gpio_i2c {
-	unsigned int		bus_num;
-	unsigned int		pin_sda;
-	unsigned int		pin_scl;
-	int			udelay;
-	int			timeout;
-};
-
-/* sm501_initdata
- *
- * use for initialising values that may not have been setup
- * before the driver is loaded.
-*/
-
-struct sm501_reg_init {
-	unsigned long		set;
-	unsigned long		mask;
-};
-
-#define SM501_USE_USB_HOST	(1<<0)
-#define SM501_USE_USB_SLAVE	(1<<1)
-#define SM501_USE_SSP0		(1<<2)
-#define SM501_USE_SSP1		(1<<3)
-#define SM501_USE_UART0		(1<<4)
-#define SM501_USE_UART1		(1<<5)
-#define SM501_USE_FBACCEL	(1<<6)
-#define SM501_USE_AC97		(1<<7)
-#define SM501_USE_I2S		(1<<8)
-#define SM501_USE_GPIO		(1<<9)
-
-#define SM501_USE_ALL		(0xffffffff)
-
-struct sm501_initdata {
-	struct sm501_reg_init	gpio_low;
-	struct sm501_reg_init	gpio_high;
-	struct sm501_reg_init	misc_timing;
-	struct sm501_reg_init	misc_control;
-
-	unsigned long		devices;
-	unsigned long		mclk;		/* non-zero to modify */
-	unsigned long		m1xclk;		/* non-zero to modify */
-};
-
-/* sm501_init_gpio
- *
- * default gpio settings
-*/
-
-struct sm501_init_gpio {
-	struct sm501_reg_init	gpio_data_low;
-	struct sm501_reg_init	gpio_data_high;
-	struct sm501_reg_init	gpio_ddr_low;
-	struct sm501_reg_init	gpio_ddr_high;
-};
-
-#define SM501_FLAG_SUSPEND_OFF		(1<<4)
-
-/* sm501_platdata
- *
- * This is passed with the platform device to allow the board
- * to control the behaviour of the SM501 driver(s) which attach
- * to the device.
- *
-*/
-
-struct sm501_platdata {
-	struct sm501_initdata		*init;
-	struct sm501_init_gpio		*init_gpiop;
-	struct sm501_platdata_fb	*fb;
-
-	int				 flags;
-	int				 gpio_base;
-
-	int	(*get_power)(struct device *dev);
-	int	(*set_power)(struct device *dev, unsigned int on);
-
-	struct sm501_platdata_gpio_i2c	*gpio_i2c;
-	unsigned int			 gpio_i2c_nr;
-};
-
-#if defined(CONFIG_PPC32)
-#define smc501_readl(addr)		ioread32be((addr))
-#define smc501_writel(val, addr)	iowrite32be((val), (addr))
-#else
-#define smc501_readl(addr)		readl(addr)
-#define smc501_writel(val, addr)	writel(val, addr)
-#endif
diff --git a/ANDROID_3.4.5/include/linux/smc911x.h b/ANDROID_3.4.5/include/linux/smc911x.h
deleted file mode 100644
index 521f3714..00000000
--- a/ANDROID_3.4.5/include/linux/smc911x.h
+++ /dev/null
@@ -1,13 +0,0 @@
-#ifndef __SMC911X_H__
-#define __SMC911X_H__
-
-#define SMC911X_USE_16BIT (1 << 0)
-#define SMC911X_USE_32BIT (1 << 1)
-
-struct smc911x_platdata {
-	unsigned long flags;
-	unsigned long irq_flags; /* IRQF_... */
-	int irq_polarity;
-};
-
-#endif /* __SMC911X_H__ */
diff --git a/ANDROID_3.4.5/include/linux/smc91x.h b/ANDROID_3.4.5/include/linux/smc91x.h
deleted file mode 100644
index 76199b75..00000000
--- a/ANDROID_3.4.5/include/linux/smc91x.h
+++ /dev/null
@@ -1,34 +0,0 @@
-#ifndef __SMC91X_H__
-#define __SMC91X_H__
-
-#define SMC91X_USE_8BIT (1 << 0)
-#define SMC91X_USE_16BIT (1 << 1)
-#define SMC91X_USE_32BIT (1 << 2)
-
-#define SMC91X_NOWAIT		(1 << 3)
-
-/* two bits for IO_SHIFT, let's hope later designs will keep this sane */
-#define SMC91X_IO_SHIFT_0	(0 << 4)
-#define SMC91X_IO_SHIFT_1	(1 << 4)
-#define SMC91X_IO_SHIFT_2	(2 << 4)
-#define SMC91X_IO_SHIFT_3	(3 << 4)
-#define SMC91X_IO_SHIFT(x)	(((x) >> 4) & 0x3)
-
-#define SMC91X_USE_DMA		(1 << 6)
-
-#define RPC_LED_100_10	(0x00)	/* LED = 100Mbps OR's with 10Mbps link detect */
-#define RPC_LED_RES	(0x01)	/* LED = Reserved */
-#define RPC_LED_10	(0x02)	/* LED = 10Mbps link detect */
-#define RPC_LED_FD	(0x03)	/* LED = Full Duplex Mode */
-#define RPC_LED_TX_RX	(0x04)	/* LED = TX or RX packet occurred */
-#define RPC_LED_100	(0x05)	/* LED = 100Mbps link detect */
-#define RPC_LED_TX	(0x06)	/* LED = TX packet occurred */
-#define RPC_LED_RX	(0x07)	/* LED = RX packet occurred */
-
-struct smc91x_platdata {
-	unsigned long flags;
-	unsigned char leda;
-	unsigned char ledb;
-};
-
-#endif /* __SMC91X_H__ */
diff --git a/ANDROID_3.4.5/include/linux/smp.h b/ANDROID_3.4.5/include/linux/smp.h
deleted file mode 100644
index 10530d92..00000000
--- a/ANDROID_3.4.5/include/linux/smp.h
+++ /dev/null
@@ -1,230 +0,0 @@
-#ifndef __LINUX_SMP_H
-#define __LINUX_SMP_H
-
-/*
- *	Generic SMP support
- *		Alan Cox. <alan@redhat.com>
- */
-
-#include <linux/errno.h>
-#include <linux/types.h>
-#include <linux/list.h>
-#include <linux/cpumask.h>
-#include <linux/init.h>
-
-extern void cpu_idle(void);
-
-typedef void (*smp_call_func_t)(void *info);
-struct call_single_data {
-	struct list_head list;
-	smp_call_func_t func;
-	void *info;
-	u16 flags;
-	u16 priv;
-};
-
-/* total number of cpus in this system (may exceed NR_CPUS) */
-extern unsigned int total_cpus;
-
-int smp_call_function_single(int cpuid, smp_call_func_t func, void *info,
-			     int wait);
-
-#ifdef CONFIG_SMP
-
-#include <linux/preempt.h>
-#include <linux/kernel.h>
-#include <linux/compiler.h>
-#include <linux/thread_info.h>
-#include <asm/smp.h>
-
-/*
- * main cross-CPU interfaces, handles INIT, TLB flush, STOP, etc.
- * (defined in asm header):
- */
-
-/*
- * stops all CPUs but the current one:
- */
-extern void smp_send_stop(void);
-
-/*
- * sends a 'reschedule' event to another CPU:
- */
-extern void smp_send_reschedule(int cpu);
-
-
-/*
- * Prepare machine for booting other CPUs.
- */
-extern void smp_prepare_cpus(unsigned int max_cpus);
-
-/*
- * Bring a CPU up
- */
-extern int __cpu_up(unsigned int cpunum);
-
-/*
- * Final polishing of CPUs
- */
-extern void smp_cpus_done(unsigned int max_cpus);
-
-/*
- * Call a function on all other processors
- */
-int smp_call_function(smp_call_func_t func, void *info, int wait);
-void smp_call_function_many(const struct cpumask *mask,
-			    smp_call_func_t func, void *info, bool wait);
-
-void __smp_call_function_single(int cpuid, struct call_single_data *data,
-				int wait);
-
-int smp_call_function_any(const struct cpumask *mask,
-			  smp_call_func_t func, void *info, int wait);
-
-/*
- * Generic and arch helpers
- */
-#ifdef CONFIG_USE_GENERIC_SMP_HELPERS
-void __init call_function_init(void);
-void generic_smp_call_function_single_interrupt(void);
-void generic_smp_call_function_interrupt(void);
-void ipi_call_lock(void);
-void ipi_call_unlock(void);
-void ipi_call_lock_irq(void);
-void ipi_call_unlock_irq(void);
-#else
-static inline void call_function_init(void) { }
-#endif
-
-/*
- * Call a function on all processors
- */
-int on_each_cpu(smp_call_func_t func, void *info, int wait);
-
-/*
- * Call a function on processors specified by mask, which might include
- * the local one.
- */
-void on_each_cpu_mask(const struct cpumask *mask, smp_call_func_t func,
-		void *info, bool wait);
-
-/*
- * Call a function on each processor for which the supplied function
- * cond_func returns a positive value. This may include the local
- * processor.
- */
-void on_each_cpu_cond(bool (*cond_func)(int cpu, void *info),
-		smp_call_func_t func, void *info, bool wait,
-		gfp_t gfp_flags);
-
-/*
- * Mark the boot cpu "online" so that it can call console drivers in
- * printk() and can access its per-cpu storage.
- */
-void smp_prepare_boot_cpu(void);
-
-extern unsigned int setup_max_cpus;
-extern void __init setup_nr_cpu_ids(void);
-extern void __init smp_init(void);
-
-#else /* !SMP */
-
-static inline void smp_send_stop(void) { }
-
-/*
- *	These macros fold the SMP functionality into a single CPU system
- */
-#define raw_smp_processor_id()			0
-static inline int up_smp_call_function(smp_call_func_t func, void *info)
-{
-	return 0;
-}
-#define smp_call_function(func, info, wait) \
-			(up_smp_call_function(func, info))
-#define on_each_cpu(func,info,wait)		\
-	({					\
-		local_irq_disable();		\
-		func(info);			\
-		local_irq_enable();		\
-		0;				\
-	})
-/*
- * Note we still need to test the mask even for UP
- * because we actually can get an empty mask from
- * code that on SMP might call us without the local
- * CPU in the mask.
- */
-#define on_each_cpu_mask(mask, func, info, wait) \
-	do {						\
-		if (cpumask_test_cpu(0, (mask))) {	\
-			local_irq_disable();		\
-			(func)(info);			\
-			local_irq_enable();		\
-		}					\
-	} while (0)
-/*
- * Preemption is disabled here to make sure the cond_func is called under the
- * same condtions in UP and SMP.
- */
-#define on_each_cpu_cond(cond_func, func, info, wait, gfp_flags)\
-	do {							\
-		void *__info = (info);				\
-		preempt_disable();				\
-		if ((cond_func)(0, __info)) {			\
-			local_irq_disable();			\
-			(func)(__info);				\
-			local_irq_enable();			\
-		}						\
-		preempt_enable();				\
-	} while (0)
-
-static inline void smp_send_reschedule(int cpu) { }
-#define num_booting_cpus()			1
-#define smp_prepare_boot_cpu()			do {} while (0)
-#define smp_call_function_many(mask, func, info, wait) \
-			(up_smp_call_function(func, info))
-static inline void call_function_init(void) { }
-
-static inline int
-smp_call_function_any(const struct cpumask *mask, smp_call_func_t func,
-		      void *info, int wait)
-{
-	return smp_call_function_single(0, func, info, wait);
-}
-
-#endif /* !SMP */
-
-/*
- * smp_processor_id(): get the current CPU ID.
- *
- * if DEBUG_PREEMPT is enabled then we check whether it is
- * used in a preemption-safe way. (smp_processor_id() is safe
- * if it's used in a preemption-off critical section, or in
- * a thread that is bound to the current CPU.)
- *
- * NOTE: raw_smp_processor_id() is for internal use only
- * (smp_processor_id() is the preferred variant), but in rare
- * instances it might also be used to turn off false positives
- * (i.e. smp_processor_id() use that the debugging code reports but
- * which use for some reason is legal). Don't use this to hack around
- * the warning message, as your code might not work under PREEMPT.
- */
-#ifdef CONFIG_DEBUG_PREEMPT
-  extern unsigned int debug_smp_processor_id(void);
-# define smp_processor_id() debug_smp_processor_id()
-#else
-# define smp_processor_id() raw_smp_processor_id()
-#endif
-
-#define get_cpu()		({ preempt_disable(); smp_processor_id(); })
-#define put_cpu()		preempt_enable()
-
-/*
- * Callback to arch code if there's nosmp or maxcpus=0 on the
- * boot command line:
- */
-extern void arch_disable_smp_support(void);
-
-void smp_setup_processor_id(void);
-
-#endif /* __LINUX_SMP_H */
diff --git a/ANDROID_3.4.5/include/linux/smsc911x.h b/ANDROID_3.4.5/include/linux/smsc911x.h
deleted file mode 100644
index 4dde70e7..00000000
--- a/ANDROID_3.4.5/include/linux/smsc911x.h
+++ /dev/null
@@ -1,62 +0,0 @@
-/***************************************************************************
- *
- * Copyright (C) 2004-2008 SMSC
- * Copyright (C) 2005-2008 ARM
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- *
- ***************************************************************************/
-#ifndef __LINUX_SMSC911X_H__
-#define __LINUX_SMSC911X_H__
-
-#include <linux/phy.h>
-
-/* platform_device configuration data, should be assigned to
- * the platform_device's dev.platform_data */
-struct smsc911x_platform_config {
-	unsigned int irq_polarity;
-	unsigned int irq_type;
-	unsigned int flags;
-	unsigned int shift;
-	phy_interface_t phy_interface;
-	unsigned char mac[6];
-};
-
-/* Constants for platform_device irq polarity configuration */
-#define SMSC911X_IRQ_POLARITY_ACTIVE_LOW	0
-#define SMSC911X_IRQ_POLARITY_ACTIVE_HIGH	1
-
-/* Constants for platform_device irq type configuration */
-#define SMSC911X_IRQ_TYPE_OPEN_DRAIN		0
-#define SMSC911X_IRQ_TYPE_PUSH_PULL		1
-
-/* Constants for flags */
-#define SMSC911X_USE_16BIT 			(BIT(0))
-#define SMSC911X_USE_32BIT 			(BIT(1))
-#define SMSC911X_FORCE_INTERNAL_PHY		(BIT(2))
-#define SMSC911X_FORCE_EXTERNAL_PHY 		(BIT(3))
-#define SMSC911X_SAVE_MAC_ADDRESS		(BIT(4))
-
-/*
- * SMSC911X_SWAP_FIFO:
- * Enables software byte swap for fifo data. Should only be used as a
- * "last resort" in the case of big endian mode on boards with incorrectly
- * routed data bus to older devices such as LAN9118. Newer devices such as
- * LAN9221 can handle this in hardware, there are registers to control
- * this swapping but the driver doesn't currently use them.
- */
-#define SMSC911X_SWAP_FIFO			(BIT(5))
-
-#endif /* __LINUX_SMSC911X_H__ */
diff --git a/ANDROID_3.4.5/include/linux/smscphy.h b/ANDROID_3.4.5/include/linux/smscphy.h
deleted file mode 100644
index ce718cbc..00000000
--- a/ANDROID_3.4.5/include/linux/smscphy.h
+++ /dev/null
@@ -1,25 +0,0 @@
-#ifndef __LINUX_SMSCPHY_H__
-#define __LINUX_SMSCPHY_H__
-
-#define MII_LAN83C185_ISF 29 /* Interrupt Source Flags */
-#define MII_LAN83C185_IM  30 /* Interrupt Mask */
-#define MII_LAN83C185_CTRL_STATUS 17 /* Mode/Status Register */
-
-#define MII_LAN83C185_ISF_INT1 (1<<1) /* Auto-Negotiation Page Received */
-#define MII_LAN83C185_ISF_INT2 (1<<2) /* Parallel Detection Fault */
-#define MII_LAN83C185_ISF_INT3 (1<<3) /* Auto-Negotiation LP Ack */
-#define MII_LAN83C185_ISF_INT4 (1<<4) /* Link Down */
-#define MII_LAN83C185_ISF_INT5 (1<<5) /* Remote Fault Detected */
-#define MII_LAN83C185_ISF_INT6 (1<<6) /* Auto-Negotiation complete */
-#define MII_LAN83C185_ISF_INT7 (1<<7) /* ENERGYON */
-
-#define MII_LAN83C185_ISF_INT_ALL (0x0e)
-
-#define MII_LAN83C185_ISF_INT_PHYLIB_EVENTS \
-	(MII_LAN83C185_ISF_INT6 | MII_LAN83C185_ISF_INT4 | \
-	 MII_LAN83C185_ISF_INT7)
-
-#define MII_LAN83C185_EDPWRDOWN (1 << 13) /* EDPWRDOWN */
-#define MII_LAN83C185_ENERGYON  (1 << 1)  /* ENERGYON */
-
-#endif /* __LINUX_SMSCPHY_H__ */
diff --git a/ANDROID_3.4.5/include/linux/snmp.h b/ANDROID_3.4.5/include/linux/snmp.h
deleted file mode 100644
index 2e68f5ba..00000000
--- a/ANDROID_3.4.5/include/linux/snmp.h
+++ /dev/null
@@ -1,273 +0,0 @@
-/*
- * Definitions for MIBs
- *
- * Author: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
- */
-
-#ifndef _LINUX_SNMP_H
-#define _LINUX_SNMP_H
-
-/* ipstats mib definitions */
-/*
- * RFC 1213:  MIB-II
- * RFC 2011 (updates 1213):  SNMPv2-MIB-IP
- * RFC 2863:  Interfaces Group MIB
- * RFC 2465:  IPv6 MIB: General Group
- * draft-ietf-ipv6-rfc2011-update-10.txt: MIB for IP: IP Statistics Tables
- */
-enum
-{
-	IPSTATS_MIB_NUM = 0,
-	IPSTATS_MIB_INPKTS,			/* InReceives */
-	IPSTATS_MIB_INHDRERRORS,		/* InHdrErrors */
-	IPSTATS_MIB_INTOOBIGERRORS,		/* InTooBigErrors */
-	IPSTATS_MIB_INNOROUTES,			/* InNoRoutes */
-	IPSTATS_MIB_INADDRERRORS,		/* InAddrErrors */
-	IPSTATS_MIB_INUNKNOWNPROTOS,		/* InUnknownProtos */
-	IPSTATS_MIB_INTRUNCATEDPKTS,		/* InTruncatedPkts */
-	IPSTATS_MIB_INDISCARDS,			/* InDiscards */
-	IPSTATS_MIB_INDELIVERS,			/* InDelivers */
-	IPSTATS_MIB_OUTFORWDATAGRAMS,		/* OutForwDatagrams */
-	IPSTATS_MIB_OUTPKTS,			/* OutRequests */
-	IPSTATS_MIB_OUTDISCARDS,		/* OutDiscards */
-	IPSTATS_MIB_OUTNOROUTES,		/* OutNoRoutes */
-	IPSTATS_MIB_REASMTIMEOUT,		/* ReasmTimeout */
-	IPSTATS_MIB_REASMREQDS,			/* ReasmReqds */
-	IPSTATS_MIB_REASMOKS,			/* ReasmOKs */
-	IPSTATS_MIB_REASMFAILS,			/* ReasmFails */
-	IPSTATS_MIB_FRAGOKS,			/* FragOKs */
-	IPSTATS_MIB_FRAGFAILS,			/* FragFails */
-	IPSTATS_MIB_FRAGCREATES,		/* FragCreates */
-	IPSTATS_MIB_INMCASTPKTS,		/* InMcastPkts */
-	IPSTATS_MIB_OUTMCASTPKTS,		/* OutMcastPkts */
-	IPSTATS_MIB_INBCASTPKTS,		/* InBcastPkts */
-	IPSTATS_MIB_OUTBCASTPKTS,		/* OutBcastPkts */
-	IPSTATS_MIB_INOCTETS,			/* InOctets */
-	IPSTATS_MIB_OUTOCTETS,			/* OutOctets */
-	IPSTATS_MIB_INMCASTOCTETS,		/* InMcastOctets */
-	IPSTATS_MIB_OUTMCASTOCTETS,		/* OutMcastOctets */
-	IPSTATS_MIB_INBCASTOCTETS,		/* InBcastOctets */
-	IPSTATS_MIB_OUTBCASTOCTETS,		/* OutBcastOctets */
-	__IPSTATS_MIB_MAX
-};
-
-/* icmp mib definitions */
-/*
- * RFC 1213:  MIB-II ICMP Group
- * RFC 2011 (updates 1213):  SNMPv2 MIB for IP: ICMP group
- */
-enum
-{
-	ICMP_MIB_NUM = 0,
-	ICMP_MIB_INMSGS,			/* InMsgs */
-	ICMP_MIB_INERRORS,			/* InErrors */
-	ICMP_MIB_INDESTUNREACHS,		/* InDestUnreachs */
-	ICMP_MIB_INTIMEEXCDS,			/* InTimeExcds */
-	ICMP_MIB_INPARMPROBS,			/* InParmProbs */
-	ICMP_MIB_INSRCQUENCHS,			/* InSrcQuenchs */
-	ICMP_MIB_INREDIRECTS,			/* InRedirects */
-	ICMP_MIB_INECHOS,			/* InEchos */
-	ICMP_MIB_INECHOREPS,			/* InEchoReps */
-	ICMP_MIB_INTIMESTAMPS,			/* InTimestamps */
-	ICMP_MIB_INTIMESTAMPREPS,		/* InTimestampReps */
-	ICMP_MIB_INADDRMASKS,			/* InAddrMasks */
-	ICMP_MIB_INADDRMASKREPS,		/* InAddrMaskReps */
-	ICMP_MIB_OUTMSGS,			/* OutMsgs */
-	ICMP_MIB_OUTERRORS,			/* OutErrors */
-	ICMP_MIB_OUTDESTUNREACHS,		/* OutDestUnreachs */
-	ICMP_MIB_OUTTIMEEXCDS,			/* OutTimeExcds */
-	ICMP_MIB_OUTPARMPROBS,			/* OutParmProbs */
-	ICMP_MIB_OUTSRCQUENCHS,			/* OutSrcQuenchs */
-	ICMP_MIB_OUTREDIRECTS,			/* OutRedirects */
-	ICMP_MIB_OUTECHOS,			/* OutEchos */
-	ICMP_MIB_OUTECHOREPS,			/* OutEchoReps */
-	ICMP_MIB_OUTTIMESTAMPS,			/* OutTimestamps */
-	ICMP_MIB_OUTTIMESTAMPREPS,		/* OutTimestampReps */
-	ICMP_MIB_OUTADDRMASKS,			/* OutAddrMasks */
-	ICMP_MIB_OUTADDRMASKREPS,		/* OutAddrMaskReps */
-	__ICMP_MIB_MAX
-};
-
-#define __ICMPMSG_MIB_MAX 512	/* Out+In for all 8-bit ICMP types */
-
-/* icmp6 mib definitions */
-/*
- * RFC 2466:  ICMPv6-MIB
- */
-enum
-{
-	ICMP6_MIB_NUM = 0,
-	ICMP6_MIB_INMSGS,			/* InMsgs */
-	ICMP6_MIB_INERRORS,			/* InErrors */
-	ICMP6_MIB_OUTMSGS,			/* OutMsgs */
-	ICMP6_MIB_OUTERRORS,			/* OutErrors */
-	__ICMP6_MIB_MAX
-};
-
-#define __ICMP6MSG_MIB_MAX 512 /* Out+In for all 8-bit ICMPv6 types */
-
-/* tcp mib definitions */
-/*
- * RFC 1213:  MIB-II TCP group
- * RFC 2012 (updates 1213):  SNMPv2-MIB-TCP
- */
-enum
-{
-	TCP_MIB_NUM = 0,
-	TCP_MIB_RTOALGORITHM,			/* RtoAlgorithm */
-	TCP_MIB_RTOMIN,				/* RtoMin */
-	TCP_MIB_RTOMAX,				/* RtoMax */
-	TCP_MIB_MAXCONN,			/* MaxConn */
-	TCP_MIB_ACTIVEOPENS,			/* ActiveOpens */
-	TCP_MIB_PASSIVEOPENS,			/* PassiveOpens */
-	TCP_MIB_ATTEMPTFAILS,			/* AttemptFails */
-	TCP_MIB_ESTABRESETS,			/* EstabResets */
-	TCP_MIB_CURRESTAB,			/* CurrEstab */
-	TCP_MIB_INSEGS,				/* InSegs */
-	TCP_MIB_OUTSEGS,			/* OutSegs */
-	TCP_MIB_RETRANSSEGS,			/* RetransSegs */
-	TCP_MIB_INERRS,				/* InErrs */
-	TCP_MIB_OUTRSTS,			/* OutRsts */
-	__TCP_MIB_MAX
-};
-
-/* udp mib definitions */
-/*
- * RFC 1213:  MIB-II UDP group
- * RFC 2013 (updates 1213):  SNMPv2-MIB-UDP
- */
-enum
-{
-	UDP_MIB_NUM = 0,
-	UDP_MIB_INDATAGRAMS,			/* InDatagrams */
-	UDP_MIB_NOPORTS,			/* NoPorts */
-	UDP_MIB_INERRORS,			/* InErrors */
-	UDP_MIB_OUTDATAGRAMS,			/* OutDatagrams */
-	UDP_MIB_RCVBUFERRORS,			/* RcvbufErrors */
-	UDP_MIB_SNDBUFERRORS,			/* SndbufErrors */
-	__UDP_MIB_MAX
-};
-
-/* linux mib definitions */
-enum
-{
-	LINUX_MIB_NUM = 0,
-	LINUX_MIB_SYNCOOKIESSENT,		/* SyncookiesSent */
-	LINUX_MIB_SYNCOOKIESRECV,		/* SyncookiesRecv */
-	LINUX_MIB_SYNCOOKIESFAILED,		/* SyncookiesFailed */
-	LINUX_MIB_EMBRYONICRSTS,		/* EmbryonicRsts */
-	LINUX_MIB_PRUNECALLED,			/* PruneCalled */
-	LINUX_MIB_RCVPRUNED,			/* RcvPruned */
-	LINUX_MIB_OFOPRUNED,			/* OfoPruned */
-	LINUX_MIB_OUTOFWINDOWICMPS,		/* OutOfWindowIcmps */
-	LINUX_MIB_LOCKDROPPEDICMPS,		/* LockDroppedIcmps */
-	LINUX_MIB_ARPFILTER,			/* ArpFilter */
-	LINUX_MIB_TIMEWAITED,			/* TimeWaited */
-	LINUX_MIB_TIMEWAITRECYCLED,		/* TimeWaitRecycled */
-	LINUX_MIB_TIMEWAITKILLED,		/* TimeWaitKilled */
-	LINUX_MIB_PAWSPASSIVEREJECTED,		/* PAWSPassiveRejected */
-	LINUX_MIB_PAWSACTIVEREJECTED,		/* PAWSActiveRejected */
-	LINUX_MIB_PAWSESTABREJECTED,		/* PAWSEstabRejected */
-	LINUX_MIB_DELAYEDACKS,			/* DelayedACKs */
-	LINUX_MIB_DELAYEDACKLOCKED,		/* DelayedACKLocked */
-	LINUX_MIB_DELAYEDACKLOST,		/* DelayedACKLost */
-	LINUX_MIB_LISTENOVERFLOWS,		/* ListenOverflows */
-	LINUX_MIB_LISTENDROPS,			/* ListenDrops */
-	LINUX_MIB_TCPPREQUEUED,			/* TCPPrequeued */
-	LINUX_MIB_TCPDIRECTCOPYFROMBACKLOG,	/* TCPDirectCopyFromBacklog */
-	LINUX_MIB_TCPDIRECTCOPYFROMPREQUEUE,	/* TCPDirectCopyFromPrequeue */
-	LINUX_MIB_TCPPREQUEUEDROPPED,		/* TCPPrequeueDropped */
-	LINUX_MIB_TCPHPHITS,			/* TCPHPHits */
-	LINUX_MIB_TCPHPHITSTOUSER,		/* TCPHPHitsToUser */
-	LINUX_MIB_TCPPUREACKS,			/* TCPPureAcks */
-	LINUX_MIB_TCPHPACKS,			/* TCPHPAcks */
-	LINUX_MIB_TCPRENORECOVERY,		/* TCPRenoRecovery */
-	LINUX_MIB_TCPSACKRECOVERY,		/* TCPSackRecovery */
-	LINUX_MIB_TCPSACKRENEGING,		/* TCPSACKReneging */
-	LINUX_MIB_TCPFACKREORDER,		/* TCPFACKReorder */
-	LINUX_MIB_TCPSACKREORDER,		/* TCPSACKReorder */
-	LINUX_MIB_TCPRENOREORDER,		/* TCPRenoReorder */
-	LINUX_MIB_TCPTSREORDER,			/* TCPTSReorder */
-	LINUX_MIB_TCPFULLUNDO,			/* TCPFullUndo */
-	LINUX_MIB_TCPPARTIALUNDO,		/* TCPPartialUndo */
-	LINUX_MIB_TCPDSACKUNDO,			/* TCPDSACKUndo */
-	LINUX_MIB_TCPLOSSUNDO,			/* TCPLossUndo */
-	LINUX_MIB_TCPLOSTRETRANSMIT,		/* TCPLostRetransmit */
-	LINUX_MIB_TCPRENOFAILURES,		/* TCPRenoFailures */
-	LINUX_MIB_TCPSACKFAILURES,		/* TCPSackFailures */
-	LINUX_MIB_TCPLOSSFAILURES,		/* TCPLossFailures */
-	LINUX_MIB_TCPFASTRETRANS,		/* TCPFastRetrans */
-	LINUX_MIB_TCPFORWARDRETRANS,		/* TCPForwardRetrans */
-	LINUX_MIB_TCPSLOWSTARTRETRANS,		/* TCPSlowStartRetrans */
-	LINUX_MIB_TCPTIMEOUTS,			/* TCPTimeouts */
-	LINUX_MIB_TCPRENORECOVERYFAIL,		/* TCPRenoRecoveryFail */
-	LINUX_MIB_TCPSACKRECOVERYFAIL,		/* TCPSackRecoveryFail */
-	LINUX_MIB_TCPSCHEDULERFAILED,		/* TCPSchedulerFailed */
-	LINUX_MIB_TCPRCVCOLLAPSED,		/* TCPRcvCollapsed */
-	LINUX_MIB_TCPDSACKOLDSENT,		/* TCPDSACKOldSent */
-	LINUX_MIB_TCPDSACKOFOSENT,		/* TCPDSACKOfoSent */
-	LINUX_MIB_TCPDSACKRECV,			/* TCPDSACKRecv */
-	LINUX_MIB_TCPDSACKOFORECV,		/* TCPDSACKOfoRecv */
-	LINUX_MIB_TCPABORTONSYN,		/* TCPAbortOnSyn */
-	LINUX_MIB_TCPABORTONDATA,		/* TCPAbortOnData */
-	LINUX_MIB_TCPABORTONCLOSE,		/* TCPAbortOnClose */
-	LINUX_MIB_TCPABORTONMEMORY,		/* TCPAbortOnMemory */
-	LINUX_MIB_TCPABORTONTIMEOUT,		/* TCPAbortOnTimeout */
-	LINUX_MIB_TCPABORTONLINGER,		/* TCPAbortOnLinger */
-	LINUX_MIB_TCPABORTFAILED,		/* TCPAbortFailed */
-	LINUX_MIB_TCPMEMORYPRESSURES,		/* TCPMemoryPressures */
-	LINUX_MIB_TCPSACKDISCARD,		/* TCPSACKDiscard */
-	LINUX_MIB_TCPDSACKIGNOREDOLD,		/* TCPSACKIgnoredOld */
-	LINUX_MIB_TCPDSACKIGNOREDNOUNDO,	/* TCPSACKIgnoredNoUndo */
-	LINUX_MIB_TCPSPURIOUSRTOS,		/* TCPSpuriousRTOs */
-	LINUX_MIB_TCPMD5NOTFOUND,		/* TCPMD5NotFound */
-	LINUX_MIB_TCPMD5UNEXPECTED,		/* TCPMD5Unexpected */
-	LINUX_MIB_SACKSHIFTED,
-	LINUX_MIB_SACKMERGED,
-	LINUX_MIB_SACKSHIFTFALLBACK,
-	LINUX_MIB_TCPBACKLOGDROP,
-	LINUX_MIB_TCPMINTTLDROP, /* RFC 5082 */
-	LINUX_MIB_TCPDEFERACCEPTDROP,
-	LINUX_MIB_IPRPFILTER, /* IP Reverse Path Filter (rp_filter) */
-	LINUX_MIB_TCPTIMEWAITOVERFLOW,		/* TCPTimeWaitOverflow */
-	LINUX_MIB_TCPREQQFULLDOCOOKIES,		/* TCPReqQFullDoCookies */
-	LINUX_MIB_TCPREQQFULLDROP,		/* TCPReqQFullDrop */
-	LINUX_MIB_TCPRETRANSFAIL,		/* TCPRetransFail */
-	LINUX_MIB_TCPRCVCOALESCE,			/* TCPRcvCoalesce */
-	__LINUX_MIB_MAX
-};
-
-/* linux Xfrm mib definitions */
-enum
-{
-	LINUX_MIB_XFRMNUM = 0,
-	LINUX_MIB_XFRMINERROR,			/* XfrmInError */
-	LINUX_MIB_XFRMINBUFFERERROR,		/* XfrmInBufferError */
-	LINUX_MIB_XFRMINHDRERROR,		/* XfrmInHdrError */
-	LINUX_MIB_XFRMINNOSTATES,		/* XfrmInNoStates */
-	LINUX_MIB_XFRMINSTATEPROTOERROR,	/* XfrmInStateProtoError */
-	LINUX_MIB_XFRMINSTATEMODEERROR,		/* XfrmInStateModeError */
-	LINUX_MIB_XFRMINSTATESEQERROR,		/* XfrmInStateSeqError */
-	LINUX_MIB_XFRMINSTATEEXPIRED,		/* XfrmInStateExpired */
-	LINUX_MIB_XFRMINSTATEMISMATCH,		/* XfrmInStateMismatch */
-	LINUX_MIB_XFRMINSTATEINVALID,		/* XfrmInStateInvalid */
-	LINUX_MIB_XFRMINTMPLMISMATCH,		/* XfrmInTmplMismatch */
-	LINUX_MIB_XFRMINNOPOLS,			/* XfrmInNoPols */
-	LINUX_MIB_XFRMINPOLBLOCK,		/* XfrmInPolBlock */
-	LINUX_MIB_XFRMINPOLERROR,		/* XfrmInPolError */
-	LINUX_MIB_XFRMOUTERROR,			/* XfrmOutError */
-	LINUX_MIB_XFRMOUTBUNDLEGENERROR,	/* XfrmOutBundleGenError */
-	LINUX_MIB_XFRMOUTBUNDLECHECKERROR,	/* XfrmOutBundleCheckError */
-	LINUX_MIB_XFRMOUTNOSTATES,		/* XfrmOutNoStates */
-	LINUX_MIB_XFRMOUTSTATEPROTOERROR,	/* XfrmOutStateProtoError */
-	LINUX_MIB_XFRMOUTSTATEMODEERROR,	/* XfrmOutStateModeError */
-	LINUX_MIB_XFRMOUTSTATESEQERROR,		/* XfrmOutStateSeqError */
-	LINUX_MIB_XFRMOUTSTATEEXPIRED,		/* XfrmOutStateExpired */
-	LINUX_MIB_XFRMOUTPOLBLOCK,		/* XfrmOutPolBlock */
-	LINUX_MIB_XFRMOUTPOLDEAD,		/* XfrmOutPolDead */
-	LINUX_MIB_XFRMOUTPOLERROR,		/* XfrmOutPolError */
-	LINUX_MIB_XFRMFWDHDRERROR,		/* XfrmFwdHdrError*/
-	__LINUX_MIB_XFRMMAX
-};
-
-#endif	/* _LINUX_SNMP_H */
diff --git a/ANDROID_3.4.5/include/linux/sock_diag.h b/ANDROID_3.4.5/include/linux/sock_diag.h
deleted file mode 100644
index 251729a4..00000000
--- a/ANDROID_3.4.5/include/linux/sock_diag.h
+++ /dev/null
@@ -1,48 +0,0 @@
-#ifndef __SOCK_DIAG_H__
-#define __SOCK_DIAG_H__
-
-#include <linux/types.h>
-
-#define SOCK_DIAG_BY_FAMILY 20
-
-struct sock_diag_req {
-	__u8	sdiag_family;
-	__u8	sdiag_protocol;
-};
-
-enum {
-	SK_MEMINFO_RMEM_ALLOC,
-	SK_MEMINFO_RCVBUF,
-	SK_MEMINFO_WMEM_ALLOC,
-	SK_MEMINFO_SNDBUF,
-	SK_MEMINFO_FWD_ALLOC,
-	SK_MEMINFO_WMEM_QUEUED,
-	SK_MEMINFO_OPTMEM,
-
-	SK_MEMINFO_VARS,
-};
-
-#ifdef __KERNEL__
-struct sk_buff;
-struct nlmsghdr;
-struct sock;
-
-struct sock_diag_handler {
-	__u8 family;
-	int (*dump)(struct sk_buff *skb, struct nlmsghdr *nlh);
-};
-
-int sock_diag_register(struct sock_diag_handler *h);
-void sock_diag_unregister(struct sock_diag_handler *h);
-
-void sock_diag_register_inet_compat(int (*fn)(struct sk_buff *skb, struct nlmsghdr *nlh));
-void sock_diag_unregister_inet_compat(int (*fn)(struct sk_buff *skb, struct nlmsghdr *nlh));
-
-int sock_diag_check_cookie(void *sk, __u32 *cookie);
-void sock_diag_save_cookie(void *sk, __u32 *cookie);
-
-int sock_diag_put_meminfo(struct sock *sk, struct sk_buff *skb, int attr);
-
-extern struct sock *sock_diag_nlsk;
-#endif /* KERNEL */
-#endif
diff --git a/ANDROID_3.4.5/include/linux/socket.h b/ANDROID_3.4.5/include/linux/socket.h
deleted file mode 100644
index b84bbd48..00000000
--- a/ANDROID_3.4.5/include/linux/socket.h
+++ /dev/null
@@ -1,343 +0,0 @@
-#ifndef _LINUX_SOCKET_H
-#define _LINUX_SOCKET_H
-
-/*
- * Desired design of maximum size and alignment (see RFC2553)
- */
-#define _K_SS_MAXSIZE	128	/* Implementation specific max size */
-#define _K_SS_ALIGNSIZE	(__alignof__ (struct sockaddr *))
-				/* Implementation specific desired alignment */
-
-typedef unsigned short __kernel_sa_family_t;
-
-struct __kernel_sockaddr_storage {
-	__kernel_sa_family_t	ss_family;		/* address family */
-	/* Following field(s) are implementation specific */
-	char		__data[_K_SS_MAXSIZE - sizeof(unsigned short)];
-				/* space to achieve desired size, */
-				/* _SS_MAXSIZE value minus size of ss_family */
-} __attribute__ ((aligned(_K_SS_ALIGNSIZE)));	/* force desired alignment */
-
-#ifdef __KERNEL__
-
-#include <asm/socket.h>			/* arch-dependent defines	*/
-#include <linux/sockios.h>		/* the SIOCxxx I/O controls	*/
-#include <linux/uio.h>			/* iovec support		*/
-#include <linux/types.h>		/* pid_t			*/
-#include <linux/compiler.h>		/* __user			*/
-
-struct pid;
-struct cred;
-
-#define __sockaddr_check_size(size)	\
-	BUILD_BUG_ON(((size) > sizeof(struct __kernel_sockaddr_storage)))
-
-#ifdef CONFIG_PROC_FS
-struct seq_file;
-extern void socket_seq_show(struct seq_file *seq);
-#endif
-
-typedef __kernel_sa_family_t	sa_family_t;
-
-/*
- *	1003.1g requires sa_family_t and that sa_data is char.
- */
- 
-struct sockaddr {
-	sa_family_t	sa_family;	/* address family, AF_xxx	*/
-	char		sa_data[14];	/* 14 bytes of protocol address	*/
-};
-
-struct linger {
-	int		l_onoff;	/* Linger active		*/
-	int		l_linger;	/* How long to linger for	*/
-};
-
-#define sockaddr_storage __kernel_sockaddr_storage
-
-/*
- *	As we do 4.4BSD message passing we use a 4.4BSD message passing
- *	system, not 4.3. Thus msg_accrights(len) are now missing. They
- *	belong in an obscure libc emulation or the bin.
- */
- 
-struct msghdr {
-	void	*	msg_name;	/* Socket name			*/
-	int		msg_namelen;	/* Length of name		*/
-	struct iovec *	msg_iov;	/* Data blocks			*/
-	__kernel_size_t	msg_iovlen;	/* Number of blocks		*/
-	void 	*	msg_control;	/* Per protocol magic (eg BSD file descriptor passing) */
-	__kernel_size_t	msg_controllen;	/* Length of cmsg list */
-	unsigned	msg_flags;
-};
-
-/* For recvmmsg/sendmmsg */
-struct mmsghdr {
-	struct msghdr   msg_hdr;
-	unsigned        msg_len;
-};
-
-/*
- *	POSIX 1003.1g - ancillary data object information
- *	Ancillary data consits of a sequence of pairs of
- *	(cmsghdr, cmsg_data[])
- */
-
-struct cmsghdr {
-	__kernel_size_t	cmsg_len;	/* data byte count, including hdr */
-        int		cmsg_level;	/* originating protocol */
-        int		cmsg_type;	/* protocol-specific type */
-};
-
-/*
- *	Ancillary data object information MACROS
- *	Table 5-14 of POSIX 1003.1g
- */
-
-#define __CMSG_NXTHDR(ctl, len, cmsg) __cmsg_nxthdr((ctl),(len),(cmsg))
-#define CMSG_NXTHDR(mhdr, cmsg) cmsg_nxthdr((mhdr), (cmsg))
-
-#define CMSG_ALIGN(len) ( ((len)+sizeof(long)-1) & ~(sizeof(long)-1) )
-
-#define CMSG_DATA(cmsg)	((void *)((char *)(cmsg) + CMSG_ALIGN(sizeof(struct cmsghdr))))
-#define CMSG_SPACE(len) (CMSG_ALIGN(sizeof(struct cmsghdr)) + CMSG_ALIGN(len))
-#define CMSG_LEN(len) (CMSG_ALIGN(sizeof(struct cmsghdr)) + (len))
-
-#define __CMSG_FIRSTHDR(ctl,len) ((len) >= sizeof(struct cmsghdr) ? \
-				  (struct cmsghdr *)(ctl) : \
-				  (struct cmsghdr *)NULL)
-#define CMSG_FIRSTHDR(msg)	__CMSG_FIRSTHDR((msg)->msg_control, (msg)->msg_controllen)
-#define CMSG_OK(mhdr, cmsg) ((cmsg)->cmsg_len >= sizeof(struct cmsghdr) && \
-			     (cmsg)->cmsg_len <= (unsigned long) \
-			     ((mhdr)->msg_controllen - \
-			      ((char *)(cmsg) - (char *)(mhdr)->msg_control)))
-
-/*
- *	Get the next cmsg header
- *
- *	PLEASE, do not touch this function. If you think, that it is
- *	incorrect, grep kernel sources and think about consequences
- *	before trying to improve it.
- *
- *	Now it always returns valid, not truncated ancillary object
- *	HEADER. But caller still MUST check, that cmsg->cmsg_len is
- *	inside range, given by msg->msg_controllen before using
- *	ancillary object DATA.				--ANK (980731)
- */
- 
-static inline struct cmsghdr * __cmsg_nxthdr(void *__ctl, __kernel_size_t __size,
-					       struct cmsghdr *__cmsg)
-{
-	struct cmsghdr * __ptr;
-
-	__ptr = (struct cmsghdr*)(((unsigned char *) __cmsg) +  CMSG_ALIGN(__cmsg->cmsg_len));
-	if ((unsigned long)((char*)(__ptr+1) - (char *) __ctl) > __size)
-		return (struct cmsghdr *)0;
-
-	return __ptr;
-}
-
-static inline struct cmsghdr * cmsg_nxthdr (struct msghdr *__msg, struct cmsghdr *__cmsg)
-{
-	return __cmsg_nxthdr(__msg->msg_control, __msg->msg_controllen, __cmsg);
-}
-
-/* "Socket"-level control message types: */
-
-#define	SCM_RIGHTS	0x01		/* rw: access rights (array of int) */
-#define SCM_CREDENTIALS 0x02		/* rw: struct ucred		*/
-#define SCM_SECURITY	0x03		/* rw: security label		*/
-
-struct ucred {
-	__u32	pid;
-	__u32	uid;
-	__u32	gid;
-};
-
-/* Supported address families. */
-#define AF_UNSPEC	0
-#define AF_UNIX		1	/* Unix domain sockets 		*/
-#define AF_LOCAL	1	/* POSIX name for AF_UNIX	*/
-#define AF_INET		2	/* Internet IP Protocol 	*/
-#define AF_AX25		3	/* Amateur Radio AX.25 		*/
-#define AF_IPX		4	/* Novell IPX 			*/
-#define AF_APPLETALK	5	/* AppleTalk DDP 		*/
-#define AF_NETROM	6	/* Amateur Radio NET/ROM 	*/
-#define AF_BRIDGE	7	/* Multiprotocol bridge 	*/
-#define AF_ATMPVC	8	/* ATM PVCs			*/
-#define AF_X25		9	/* Reserved for X.25 project 	*/
-#define AF_INET6	10	/* IP version 6			*/
-#define AF_ROSE		11	/* Amateur Radio X.25 PLP	*/
-#define AF_DECnet	12	/* Reserved for DECnet project	*/
-#define AF_NETBEUI	13	/* Reserved for 802.2LLC project*/
-#define AF_SECURITY	14	/* Security callback pseudo AF */
-#define AF_KEY		15      /* PF_KEY key management API */
-#define AF_NETLINK	16
-#define AF_ROUTE	AF_NETLINK /* Alias to emulate 4.4BSD */
-#define AF_PACKET	17	/* Packet family		*/
-#define AF_ASH		18	/* Ash				*/
-#define AF_ECONET	19	/* Acorn Econet			*/
-#define AF_ATMSVC	20	/* ATM SVCs			*/
-#define AF_RDS		21	/* RDS sockets 			*/
-#define AF_SNA		22	/* Linux SNA Project (nutters!) */
-#define AF_IRDA		23	/* IRDA sockets			*/
-#define AF_PPPOX	24	/* PPPoX sockets		*/
-#define AF_WANPIPE	25	/* Wanpipe API Sockets */
-#define AF_LLC		26	/* Linux LLC			*/
-#define AF_CAN		29	/* Controller Area Network      */
-#define AF_TIPC		30	/* TIPC sockets			*/
-#define AF_BLUETOOTH	31	/* Bluetooth sockets 		*/
-#define AF_IUCV		32	/* IUCV sockets			*/
-#define AF_RXRPC	33	/* RxRPC sockets 		*/
-#define AF_ISDN		34	/* mISDN sockets 		*/
-#define AF_PHONET	35	/* Phonet sockets		*/
-#define AF_IEEE802154	36	/* IEEE802154 sockets		*/
-#define AF_CAIF		37	/* CAIF sockets			*/
-#define AF_ALG		38	/* Algorithm sockets		*/
-#define AF_NFC		39	/* NFC sockets			*/
-#define AF_MAX		40	/* For now.. */
-
-/* Protocol families, same as address families. */
-#define PF_UNSPEC	AF_UNSPEC
-#define PF_UNIX		AF_UNIX
-#define PF_LOCAL	AF_LOCAL
-#define PF_INET		AF_INET
-#define PF_AX25		AF_AX25
-#define PF_IPX		AF_IPX
-#define PF_APPLETALK	AF_APPLETALK
-#define	PF_NETROM	AF_NETROM
-#define PF_BRIDGE	AF_BRIDGE
-#define PF_ATMPVC	AF_ATMPVC
-#define PF_X25		AF_X25
-#define PF_INET6	AF_INET6
-#define PF_ROSE		AF_ROSE
-#define PF_DECnet	AF_DECnet
-#define PF_NETBEUI	AF_NETBEUI
-#define PF_SECURITY	AF_SECURITY
-#define PF_KEY		AF_KEY
-#define PF_NETLINK	AF_NETLINK
-#define PF_ROUTE	AF_ROUTE
-#define PF_PACKET	AF_PACKET
-#define PF_ASH		AF_ASH
-#define PF_ECONET	AF_ECONET
-#define PF_ATMSVC	AF_ATMSVC
-#define PF_RDS		AF_RDS
-#define PF_SNA		AF_SNA
-#define PF_IRDA		AF_IRDA
-#define PF_PPPOX	AF_PPPOX
-#define PF_WANPIPE	AF_WANPIPE
-#define PF_LLC		AF_LLC
-#define PF_CAN		AF_CAN
-#define PF_TIPC		AF_TIPC
-#define PF_BLUETOOTH	AF_BLUETOOTH
-#define PF_IUCV		AF_IUCV
-#define PF_RXRPC	AF_RXRPC
-#define PF_ISDN		AF_ISDN
-#define PF_PHONET	AF_PHONET
-#define PF_IEEE802154	AF_IEEE802154
-#define PF_CAIF		AF_CAIF
-#define PF_ALG		AF_ALG
-#define PF_NFC		AF_NFC
-#define PF_MAX		AF_MAX
-
-/* Maximum queue length specifiable by listen.  */
-#define SOMAXCONN	128
-
-/* Flags we can use with send/ and recv. 
-   Added those for 1003.1g not all are supported yet
- */
- 
-#define MSG_OOB		1
-#define MSG_PEEK	2
-#define MSG_DONTROUTE	4
-#define MSG_TRYHARD     4       /* Synonym for MSG_DONTROUTE for DECnet */
-#define MSG_CTRUNC	8
-#define MSG_PROBE	0x10	/* Do not send. Only probe path f.e. for MTU */
-#define MSG_TRUNC	0x20
-#define MSG_DONTWAIT	0x40	/* Nonblocking io		 */
-#define MSG_EOR         0x80	/* End of record */
-#define MSG_WAITALL	0x100	/* Wait for a full request */
-#define MSG_FIN         0x200
-#define MSG_SYN		0x400
-#define MSG_CONFIRM	0x800	/* Confirm path validity */
-#define MSG_RST		0x1000
-#define MSG_ERRQUEUE	0x2000	/* Fetch message from error queue */
-#define MSG_NOSIGNAL	0x4000	/* Do not generate SIGPIPE */
-#define MSG_MORE	0x8000	/* Sender will send more */
-#define MSG_WAITFORONE	0x10000	/* recvmmsg(): block until 1+ packets avail */
-#define MSG_SENDPAGE_NOTLAST 0x20000 /* sendpage() internal : not the last page */
-#define MSG_EOF         MSG_FIN
-
-#define MSG_CMSG_CLOEXEC 0x40000000	/* Set close_on_exit for file
-					   descriptor received through
-					   SCM_RIGHTS */
-#if defined(CONFIG_COMPAT)
-#define MSG_CMSG_COMPAT	0x80000000	/* This message needs 32 bit fixups */
-#else
-#define MSG_CMSG_COMPAT	0		/* We never have 32 bit fixups */
-#endif
-
-
-/* Setsockoptions(2) level. Thanks to BSD these must match IPPROTO_xxx */
-#define SOL_IP		0
-/* #define SOL_ICMP	1	No-no-no! Due to Linux :-) we cannot use SOL_ICMP=1 */
-#define SOL_TCP		6
-#define SOL_UDP		17
-#define SOL_IPV6	41
-#define SOL_ICMPV6	58
-#define SOL_SCTP	132
-#define SOL_UDPLITE	136     /* UDP-Lite (RFC 3828) */
-#define SOL_RAW		255
-#define SOL_IPX		256
-#define SOL_AX25	257
-#define SOL_ATALK	258
-#define SOL_NETROM	259
-#define SOL_ROSE	260
-#define SOL_DECNET	261
-#define	SOL_X25		262
-#define SOL_PACKET	263
-#define SOL_ATM		264	/* ATM layer (cell level) */
-#define SOL_AAL		265	/* ATM Adaption Layer (packet level) */
-#define SOL_IRDA        266
-#define SOL_NETBEUI	267
-#define SOL_LLC		268
-#define SOL_DCCP	269
-#define SOL_NETLINK	270
-#define SOL_TIPC	271
-#define SOL_RXRPC	272
-#define SOL_PPPOL2TP	273
-#define SOL_BLUETOOTH	274
-#define SOL_PNPIPE	275
-#define SOL_RDS		276
-#define SOL_IUCV	277
-#define SOL_CAIF	278
-#define SOL_ALG		279
-
-/* IPX options */
-#define IPX_TYPE	1
-
-extern void cred_to_ucred(struct pid *pid, const struct cred *cred, struct ucred *ucred);
-
-extern int memcpy_fromiovec(unsigned char *kdata, struct iovec *iov, int len);
-extern int memcpy_fromiovecend(unsigned char *kdata, const struct iovec *iov,
-			       int offset, int len);
-extern int csum_partial_copy_fromiovecend(unsigned char *kdata, 
-					  struct iovec *iov, 
-					  int offset, 
-					  unsigned int len, __wsum *csump);
-
-extern int verify_iovec(struct msghdr *m, struct iovec *iov, struct sockaddr_storage *address, int mode);
-extern int memcpy_toiovec(struct iovec *v, unsigned char *kdata, int len);
-extern int memcpy_toiovecend(const struct iovec *v, unsigned char *kdata,
-			     int offset, int len);
-extern int move_addr_to_kernel(void __user *uaddr, int ulen, struct sockaddr_storage *kaddr);
-extern int put_cmsg(struct msghdr*, int level, int type, int len, void *data);
-
-struct timespec;
-
-extern int __sys_recvmmsg(int fd, struct mmsghdr __user *mmsg, unsigned int vlen,
-			  unsigned int flags, struct timespec *timeout);
-extern int __sys_sendmmsg(int fd, struct mmsghdr __user *mmsg,
-			  unsigned int vlen, unsigned int flags);
-#endif /* not kernel and not glibc */
-#endif /* _LINUX_SOCKET_H */
diff --git a/ANDROID_3.4.5/include/linux/sockios.h b/ANDROID_3.4.5/include/linux/sockios.h
deleted file mode 100644
index f7ffe36d..00000000
--- a/ANDROID_3.4.5/include/linux/sockios.h
+++ /dev/null
@@ -1,149 +0,0 @@
-/*
- * INET		An implementation of the TCP/IP protocol suite for the LINUX
- *		operating system.  INET is implemented using the  BSD Socket
- *		interface as the means of communication with the user level.
- *
- *		Definitions of the socket-level I/O control calls.
- *
- * Version:	@(#)sockios.h	1.0.2	03/09/93
- *
- * Authors:	Ross Biro
- *		Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
- *
- *		This program is free software; you can redistribute it and/or
- *		modify it under the terms of the GNU General Public License
- *		as published by the Free Software Foundation; either version
- *		2 of the License, or (at your option) any later version.
- */
-#ifndef _LINUX_SOCKIOS_H
-#define _LINUX_SOCKIOS_H
-
-#include <asm/sockios.h>
-
-/* Linux-specific socket ioctls */
-#define SIOCINQ		FIONREAD
-#define SIOCOUTQ	TIOCOUTQ        /* output queue size (not sent + not acked) */
-
-/* Routing table calls. */
-#define SIOCADDRT	0x890B		/* add routing table entry	*/
-#define SIOCDELRT	0x890C		/* delete routing table entry	*/
-#define SIOCRTMSG	0x890D		/* call to routing system	*/
-
-/* Socket configuration controls. */
-#define SIOCGIFNAME	0x8910		/* get iface name		*/
-#define SIOCSIFLINK	0x8911		/* set iface channel		*/
-#define SIOCGIFCONF	0x8912		/* get iface list		*/
-#define SIOCGIFFLAGS	0x8913		/* get flags			*/
-#define SIOCSIFFLAGS	0x8914		/* set flags			*/
-#define SIOCGIFADDR	0x8915		/* get PA address		*/
-#define SIOCSIFADDR	0x8916		/* set PA address		*/
-#define SIOCGIFDSTADDR	0x8917		/* get remote PA address	*/
-#define SIOCSIFDSTADDR	0x8918		/* set remote PA address	*/
-#define SIOCGIFBRDADDR	0x8919		/* get broadcast PA address	*/
-#define SIOCSIFBRDADDR	0x891a		/* set broadcast PA address	*/
-#define SIOCGIFNETMASK	0x891b		/* get network PA mask		*/
-#define SIOCSIFNETMASK	0x891c		/* set network PA mask		*/
-#define SIOCGIFMETRIC	0x891d		/* get metric			*/
-#define SIOCSIFMETRIC	0x891e		/* set metric			*/
-#define SIOCGIFMEM	0x891f		/* get memory address (BSD)	*/
-#define SIOCSIFMEM	0x8920		/* set memory address (BSD)	*/
-#define SIOCGIFMTU	0x8921		/* get MTU size			*/
-#define SIOCSIFMTU	0x8922		/* set MTU size			*/
-#define SIOCSIFNAME	0x8923		/* set interface name */
-#define	SIOCSIFHWADDR	0x8924		/* set hardware address 	*/
-#define SIOCGIFENCAP	0x8925		/* get/set encapsulations       */
-#define SIOCSIFENCAP	0x8926		
-#define SIOCGIFHWADDR	0x8927		/* Get hardware address		*/
-#define SIOCGIFSLAVE	0x8929		/* Driver slaving support	*/
-#define SIOCSIFSLAVE	0x8930
-#define SIOCADDMULTI	0x8931		/* Multicast address lists	*/
-#define SIOCDELMULTI	0x8932
-#define SIOCGIFINDEX	0x8933		/* name -> if_index mapping	*/
-#define SIOGIFINDEX	SIOCGIFINDEX	/* misprint compatibility :-)	*/
-#define SIOCSIFPFLAGS	0x8934		/* set/get extended flags set	*/
-#define SIOCGIFPFLAGS	0x8935
-#define SIOCDIFADDR	0x8936		/* delete PA address		*/
-#define	SIOCSIFHWBROADCAST	0x8937	/* set hardware broadcast addr	*/
-#define SIOCGIFCOUNT	0x8938		/* get number of devices */
-#define SIOCKILLADDR	0x8939		/* kill sockets with this local addr */
-
-#define SIOCGIFBR	0x8940		/* Bridging support		*/
-#define SIOCSIFBR	0x8941		/* Set bridging options 	*/
-
-#define SIOCGIFTXQLEN	0x8942		/* Get the tx queue length	*/
-#define SIOCSIFTXQLEN	0x8943		/* Set the tx queue length 	*/
-
-/* SIOCGIFDIVERT was:	0x8944		Frame diversion support */
-/* SIOCSIFDIVERT was:	0x8945		Set frame diversion options */
-
-#define SIOCETHTOOL	0x8946		/* Ethtool interface		*/
-
-#define SIOCGMIIPHY	0x8947		/* Get address of MII PHY in use. */
-#define SIOCGMIIREG	0x8948		/* Read MII PHY register.	*/
-#define SIOCSMIIREG	0x8949		/* Write MII PHY register.	*/
-
-#define SIOCWANDEV	0x894A		/* get/set netdev parameters	*/
-
-#define SIOCOUTQNSD	0x894B		/* output queue size (not sent only) */
-
-/* ARP cache control calls. */
-		    /*  0x8950 - 0x8952  * obsolete calls, don't re-use */
-#define SIOCDARP	0x8953		/* delete ARP table entry	*/
-#define SIOCGARP	0x8954		/* get ARP table entry		*/
-#define SIOCSARP	0x8955		/* set ARP table entry		*/
-
-/* RARP cache control calls. */
-#define SIOCDRARP	0x8960		/* delete RARP table entry	*/
-#define SIOCGRARP	0x8961		/* get RARP table entry		*/
-#define SIOCSRARP	0x8962		/* set RARP table entry		*/
-
-/* Driver configuration calls */
-
-#define SIOCGIFMAP	0x8970		/* Get device parameters	*/
-#define SIOCSIFMAP	0x8971		/* Set device parameters	*/
-
-/* DLCI configuration calls */
-
-#define SIOCADDDLCI	0x8980		/* Create new DLCI device	*/
-#define SIOCDELDLCI	0x8981		/* Delete DLCI device		*/
-
-#define SIOCGIFVLAN	0x8982		/* 802.1Q VLAN support		*/
-#define SIOCSIFVLAN	0x8983		/* Set 802.1Q VLAN options 	*/
-
-/* bonding calls */
-
-#define SIOCBONDENSLAVE	0x8990		/* enslave a device to the bond */
-#define SIOCBONDRELEASE 0x8991		/* release a slave from the bond*/
-#define SIOCBONDSETHWADDR      0x8992	/* set the hw addr of the bond  */
-#define SIOCBONDSLAVEINFOQUERY 0x8993   /* rtn info about slave state   */
-#define SIOCBONDINFOQUERY      0x8994	/* rtn info about bond state    */
-#define SIOCBONDCHANGEACTIVE   0x8995   /* update to a new active slave */
-			
-/* bridge calls */
-#define SIOCBRADDBR     0x89a0		/* create new bridge device     */
-#define SIOCBRDELBR     0x89a1		/* remove bridge device         */
-#define SIOCBRADDIF	0x89a2		/* add interface to bridge      */
-#define SIOCBRDELIF	0x89a3		/* remove interface from bridge */
-
-/* hardware time stamping: parameters in linux/net_tstamp.h */
-#define SIOCSHWTSTAMP   0x89b0
-
-/* Device private ioctl calls */
-
-/*
- *	These 16 ioctls are available to devices via the do_ioctl() device
- *	vector. Each device should include this file and redefine these names
- *	as their own. Because these are device dependent it is a good idea
- *	_NOT_ to issue them to random objects and hope.
- *
- *	THESE IOCTLS ARE _DEPRECATED_ AND WILL DISAPPEAR IN 2.5.X -DaveM
- */
- 
-#define SIOCDEVPRIVATE	0x89F0	/* to 89FF */
-
-/*
- *	These 16 ioctl calls are protocol private
- */
- 
-#define SIOCPROTOPRIVATE 0x89E0 /* to 89EF */
-#endif	/* _LINUX_SOCKIOS_H */
diff --git a/ANDROID_3.4.5/include/linux/som.h b/ANDROID_3.4.5/include/linux/som.h
deleted file mode 100644
index 166594e4..00000000
--- a/ANDROID_3.4.5/include/linux/som.h
+++ /dev/null
@@ -1,154 +0,0 @@
-#ifndef _LINUX_SOM_H
-#define _LINUX_SOM_H
-
-/* File format definition for SOM executables / shared libraries */
-
-/* we need struct timespec */
-#include <linux/time.h>
-
-#define SOM_PAGESIZE 4096
-
-/* this is the SOM header */
-struct som_hdr {
-	short		system_id;		/* magic number - system */
-	short		a_magic;		/* magic number - file type */
-	unsigned int	version_id;		/* versiod ID: YYMMDDHH */
-	struct timespec	file_time;		/* system clock */
-	unsigned int	entry_space;		/* space for entry point */
-	unsigned int	entry_subspace;		/* subspace for entry point */
-	unsigned int	entry_offset;		/* offset of entry point */
-	unsigned int	aux_header_location;	/* auxiliary header location */
-	unsigned int	aux_header_size;	/* auxiliary header size */
-	unsigned int	som_length;		/* length of entire SOM */
-	unsigned int	presumed_dp;		/* compiler's DP value */
-	unsigned int	space_location;		/* space dictionary location */
-	unsigned int	space_total;		/* number of space entries */
-	unsigned int	subspace_location;	/* subspace entries location */
-	unsigned int	subspace_total;		/* number of subspace entries */
-	unsigned int	loader_fixup_location;	/* MPE/iX loader fixup */
-	unsigned int	loader_fixup_total;	/* number of fixup records */
-	unsigned int	space_strings_location;	/* (sub)space names */
-	unsigned int	space_strings_size;	/* size of strings area */
-	unsigned int	init_array_location;	/* reserved */
-	unsigned int	init_array_total;	/* reserved */
-	unsigned int	compiler_location;	/* module dictionary */
-	unsigned int	compiler_total;		/* number of modules */
-	unsigned int	symbol_location;	/* symbol dictionary */
-	unsigned int	symbol_total;		/* number of symbols */
-	unsigned int	fixup_request_location;	/* fixup requests */
-	unsigned int	fixup_request_total;	/* number of fixup requests */
-	unsigned int	symbol_strings_location;/* module & symbol names area */
-	unsigned int	symbol_strings_size;	/* size of strings area */
-	unsigned int	unloadable_sp_location;	/* unloadable spaces location */
-	unsigned int	unloadable_sp_size;	/* size of data */
-	unsigned int	checksum;
-};
-
-/* values for system_id */
-
-#define SOM_SID_PARISC_1_0	0x020b
-#define SOM_SID_PARISC_1_1	0x0210
-#define SOM_SID_PARISC_2_0	0x0214
-
-/* values for a_magic */
-
-#define SOM_LIB_EXEC		0x0104
-#define SOM_RELOCATABLE		0x0106
-#define SOM_EXEC_NONSHARE	0x0107
-#define SOM_EXEC_SHARE		0x0108
-#define SOM_EXEC_DEMAND		0x010B
-#define SOM_LIB_DYN		0x010D
-#define SOM_LIB_SHARE		0x010E
-#define SOM_LIB_RELOC		0x0619
-
-/* values for version_id.  Decimal not hex, yes.  Grr. */
-
-#define SOM_ID_OLD		85082112
-#define SOM_ID_NEW		87102412
-
-struct aux_id {
-	unsigned int	mandatory :1;	/* the linker must understand this */
-	unsigned int	copy	  :1;	/* Must be copied by the linker */
-	unsigned int	append	  :1;	/* Must be merged by the linker */
-	unsigned int	ignore	  :1;	/* Discard section if unknown */
-	unsigned int	reserved  :12;
-	unsigned int	type	  :16;	/* Header type */
-	unsigned int	length;		/* length of _following_ data */
-};
-
-/* The Exec Auxiliary Header.  Called The HP-UX Header within HP apparently. */
-struct som_exec_auxhdr {
-	struct aux_id	som_auxhdr;
-	int		exec_tsize;	/* Text size in bytes */
-	int		exec_tmem;	/* Address to load text at */
-	int		exec_tfile;	/* Location of text in file */
-	int		exec_dsize;	/* Data size in bytes */
-	int		exec_dmem;	/* Address to load data at */
-	int		exec_dfile;	/* Location of data in file */
-	int		exec_bsize;	/* Uninitialised data (bss) */
-	int		exec_entry;	/* Address to start executing */
-	int		exec_flags;	/* loader flags */
-	int		exec_bfill;	/* initialisation value for bss */
-};
-
-/* Oh, the things people do to avoid casts.  Shame it'll break with gcc's
- * new aliasing rules really.
- */
-union name_pt {
-	char *		n_name;
-	unsigned int	n_strx;
-};
-
-/* The Space Dictionary */
-struct space_dictionary_record {
-	union name_pt	name;			/* index to subspace name */
-	unsigned int	is_loadable	:1;	/* loadable */
-	unsigned int	is_defined	:1;	/* defined within file */
-	unsigned int	is_private	:1;	/* not sharable */
-	unsigned int	has_intermediate_code :1; /* contains intermediate code */
-	unsigned int	is_tspecific	:1;	/* thread specific */
-	unsigned int	reserved	:11;	/* for future expansion */
-	unsigned int	sort_key	:8;	/* for linker */
-	unsigned int	reserved2	:8;	/* for future expansion */
-
-	int		space_number;		/* index */
-	int		subspace_index;		/* index into subspace dict */
-	unsigned int	subspace_quantity;	/* number of subspaces */
-	int		loader_fix_index;	/* for loader */
-	unsigned int	loader_fix_quantity;	/* for loader */
-	int		init_pointer_index;	/* data pointer array index */
-	unsigned int	init_pointer_quantity;	/* number of data pointers */
-};
-
-/* The Subspace Dictionary */
-struct subspace_dictionary_record {
-	int		space_index;
-	unsigned int	access_control_bits :7;
-	unsigned int	memory_resident	:1;
-	unsigned int	dup_common	:1;
-	unsigned int	is_common	:1;
-	unsigned int	quadrant	:2;
-	unsigned int	initially_frozen :1;
-	unsigned int	is_first	:1;
-	unsigned int	code_only	:1;
-	unsigned int	sort_key	:8;
-	unsigned int	replicate_init	:1;
-	unsigned int	continuation	:1;
-	unsigned int	is_tspecific	:1;
-	unsigned int	is_comdat	:1;
-	unsigned int	reserved	:4;
-
-	int		file_loc_init_value;
-	unsigned int	initialization_length;
-	unsigned int	subspace_start;
-	unsigned int	subspace_length;
-
-	unsigned int	reserved2	:5;
-	unsigned int	alignment	:27;
-
-	union name_pt	name;
-	int		fixup_request_index;
-	unsigned int	fixup_request_quantity;
-};
-
-#endif /* _LINUX_SOM_H */
diff --git a/ANDROID_3.4.5/include/linux/sonet.h b/ANDROID_3.4.5/include/linux/sonet.h
deleted file mode 100644
index de8832dd..00000000
--- a/ANDROID_3.4.5/include/linux/sonet.h
+++ /dev/null
@@ -1,75 +0,0 @@
-/* sonet.h - SONET/SHD physical layer control */
- 
-/* Written 1995-2000 by Werner Almesberger, EPFL LRC/ICA */
- 
-
-#ifndef LINUX_SONET_H
-#define LINUX_SONET_H
-
-#define __SONET_ITEMS \
-    __HANDLE_ITEM(section_bip); 	/* section parity errors (B1) */ \
-    __HANDLE_ITEM(line_bip);		/* line parity errors (B2) */ \
-    __HANDLE_ITEM(path_bip);		/* path parity errors (B3) */ \
-    __HANDLE_ITEM(line_febe);		/* line parity errors at remote */ \
-    __HANDLE_ITEM(path_febe);		/* path parity errors at remote */ \
-    __HANDLE_ITEM(corr_hcs);		/* correctable header errors */ \
-    __HANDLE_ITEM(uncorr_hcs);		/* uncorrectable header errors */ \
-    __HANDLE_ITEM(tx_cells);		/* cells sent */ \
-    __HANDLE_ITEM(rx_cells);		/* cells received */
-
-struct sonet_stats {
-#define __HANDLE_ITEM(i) int i
-	__SONET_ITEMS
-#undef __HANDLE_ITEM
-} __attribute__ ((packed));
-
-
-#define SONET_GETSTAT	_IOR('a',ATMIOC_PHYTYP,struct sonet_stats)
-					/* get statistics */
-#define SONET_GETSTATZ	_IOR('a',ATMIOC_PHYTYP+1,struct sonet_stats)
-					/* ... and zero counters */
-#define SONET_SETDIAG	_IOWR('a',ATMIOC_PHYTYP+2,int)
-					/* set error insertion */
-#define SONET_CLRDIAG	_IOWR('a',ATMIOC_PHYTYP+3,int)
-					/* clear error insertion */
-#define SONET_GETDIAG	_IOR('a',ATMIOC_PHYTYP+4,int)
-					/* query error insertion */
-#define SONET_SETFRAMING _IOW('a',ATMIOC_PHYTYP+5,int)
-					/* set framing mode (SONET/SDH) */
-#define SONET_GETFRAMING _IOR('a',ATMIOC_PHYTYP+6,int)
-					/* get framing mode */
-#define SONET_GETFRSENSE _IOR('a',ATMIOC_PHYTYP+7, \
-  unsigned char[SONET_FRSENSE_SIZE])	/* get framing sense information */
-
-#define SONET_INS_SBIP	  1		/* section BIP */
-#define SONET_INS_LBIP	  2		/* line BIP */
-#define SONET_INS_PBIP	  4		/* path BIP */
-#define SONET_INS_FRAME	  8		/* out of frame */
-#define SONET_INS_LOS	 16		/* set line to zero */
-#define SONET_INS_LAIS	 32		/* line alarm indication signal */
-#define SONET_INS_PAIS	 64		/* path alarm indication signal */
-#define SONET_INS_HCS	128		/* insert HCS error */
-
-#define SONET_FRAME_SONET 0		/* SONET STS-3 framing */
-#define SONET_FRAME_SDH   1		/* SDH STM-1 framing */
-
-#define SONET_FRSENSE_SIZE 6		/* C1[3],H1[3] (0xff for unknown) */
-
-
-#ifdef __KERNEL__
-
-#include <linux/atomic.h>
-
-struct k_sonet_stats {
-#define __HANDLE_ITEM(i) atomic_t i
-	__SONET_ITEMS
-#undef __HANDLE_ITEM
-};
-
-extern void sonet_copy_stats(struct k_sonet_stats *from,struct sonet_stats *to);
-extern void sonet_subtract_stats(struct k_sonet_stats *from,
-    struct sonet_stats *to);
-
-#endif
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/sony-laptop.h b/ANDROID_3.4.5/include/linux/sony-laptop.h
deleted file mode 100644
index e2e036d9..00000000
--- a/ANDROID_3.4.5/include/linux/sony-laptop.h
+++ /dev/null
@@ -1,34 +0,0 @@
-#ifndef _SONYLAPTOP_H_
-#define _SONYLAPTOP_H_
-
-#include <linux/types.h>
-
-#ifdef __KERNEL__
-
-/* used only for communication between v4l and sony-laptop */
-
-#define SONY_PIC_COMMAND_GETCAMERA		 1	/* obsolete */
-#define SONY_PIC_COMMAND_SETCAMERA		 2
-#define SONY_PIC_COMMAND_GETCAMERABRIGHTNESS	 3	/* obsolete */
-#define SONY_PIC_COMMAND_SETCAMERABRIGHTNESS	 4
-#define SONY_PIC_COMMAND_GETCAMERACONTRAST	 5	/* obsolete */
-#define SONY_PIC_COMMAND_SETCAMERACONTRAST	 6
-#define SONY_PIC_COMMAND_GETCAMERAHUE		 7	/* obsolete */
-#define SONY_PIC_COMMAND_SETCAMERAHUE		 8
-#define SONY_PIC_COMMAND_GETCAMERACOLOR		 9	/* obsolete */
-#define SONY_PIC_COMMAND_SETCAMERACOLOR		10
-#define SONY_PIC_COMMAND_GETCAMERASHARPNESS	11	/* obsolete */
-#define SONY_PIC_COMMAND_SETCAMERASHARPNESS	12
-#define SONY_PIC_COMMAND_GETCAMERAPICTURE	13	/* obsolete */
-#define SONY_PIC_COMMAND_SETCAMERAPICTURE	14
-#define SONY_PIC_COMMAND_GETCAMERAAGC		15	/* obsolete */
-#define SONY_PIC_COMMAND_SETCAMERAAGC		16
-#define SONY_PIC_COMMAND_GETCAMERADIRECTION	17	/* obsolete */
-#define SONY_PIC_COMMAND_GETCAMERAROMVERSION	18	/* obsolete */
-#define SONY_PIC_COMMAND_GETCAMERAREVISION	19	/* obsolete */
-
-int sony_pic_camera_command(int command, u8 value);
-
-#endif	/* __KERNEL__ */
-
-#endif /* _SONYLAPTOP_H_ */
diff --git a/ANDROID_3.4.5/include/linux/sonypi.h b/ANDROID_3.4.5/include/linux/sonypi.h
deleted file mode 100644
index c0f87da7..00000000
--- a/ANDROID_3.4.5/include/linux/sonypi.h
+++ /dev/null
@@ -1,171 +0,0 @@
-/*
- * Sony Programmable I/O Control Device driver for VAIO
- *
- * Copyright (C) 2001-2005 Stelian Pop <stelian@popies.net>
- *
- * Copyright (C) 2005 Narayanan R S <nars@kadamba.org>
-
- * Copyright (C) 2001-2002 Alcôve <www.alcove.com>
- *
- * Copyright (C) 2001 Michael Ashley <m.ashley@unsw.edu.au>
- *
- * Copyright (C) 2001 Junichi Morita <jun1m@mars.dti.ne.jp>
- *
- * Copyright (C) 2000 Takaya Kinjo <t-kinjo@tc4.so-net.ne.jp>
- *
- * Copyright (C) 2000 Andrew Tridgell <tridge@valinux.com>
- *
- * Earlier work by Werner Almesberger, Paul `Rusty' Russell and Paul Mackerras.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-#ifndef _SONYPI_H_
-#define _SONYPI_H_
-
-#include <linux/types.h>
-
-/* events the user application reading /dev/sonypi can use */
-
-#define SONYPI_EVENT_IGNORE			 0
-#define SONYPI_EVENT_JOGDIAL_DOWN		 1
-#define SONYPI_EVENT_JOGDIAL_UP			 2
-#define SONYPI_EVENT_JOGDIAL_DOWN_PRESSED	 3
-#define SONYPI_EVENT_JOGDIAL_UP_PRESSED		 4
-#define SONYPI_EVENT_JOGDIAL_PRESSED		 5
-#define SONYPI_EVENT_JOGDIAL_RELEASED		 6	/* obsolete */
-#define SONYPI_EVENT_CAPTURE_PRESSED		 7
-#define SONYPI_EVENT_CAPTURE_RELEASED		 8	/* obsolete */
-#define SONYPI_EVENT_CAPTURE_PARTIALPRESSED	 9
-#define SONYPI_EVENT_CAPTURE_PARTIALRELEASED	10
-#define SONYPI_EVENT_FNKEY_ESC			11
-#define SONYPI_EVENT_FNKEY_F1			12
-#define SONYPI_EVENT_FNKEY_F2			13
-#define SONYPI_EVENT_FNKEY_F3			14
-#define SONYPI_EVENT_FNKEY_F4			15
-#define SONYPI_EVENT_FNKEY_F5			16
-#define SONYPI_EVENT_FNKEY_F6			17
-#define SONYPI_EVENT_FNKEY_F7			18
-#define SONYPI_EVENT_FNKEY_F8			19
-#define SONYPI_EVENT_FNKEY_F9			20
-#define SONYPI_EVENT_FNKEY_F10			21
-#define SONYPI_EVENT_FNKEY_F11			22
-#define SONYPI_EVENT_FNKEY_F12			23
-#define SONYPI_EVENT_FNKEY_1			24
-#define SONYPI_EVENT_FNKEY_2			25
-#define SONYPI_EVENT_FNKEY_D			26
-#define SONYPI_EVENT_FNKEY_E			27
-#define SONYPI_EVENT_FNKEY_F			28
-#define SONYPI_EVENT_FNKEY_S			29
-#define SONYPI_EVENT_FNKEY_B			30
-#define SONYPI_EVENT_BLUETOOTH_PRESSED		31
-#define SONYPI_EVENT_PKEY_P1			32
-#define SONYPI_EVENT_PKEY_P2			33
-#define SONYPI_EVENT_PKEY_P3			34
-#define SONYPI_EVENT_BACK_PRESSED		35
-#define SONYPI_EVENT_LID_CLOSED			36
-#define SONYPI_EVENT_LID_OPENED			37
-#define SONYPI_EVENT_BLUETOOTH_ON		38
-#define SONYPI_EVENT_BLUETOOTH_OFF		39
-#define SONYPI_EVENT_HELP_PRESSED		40
-#define SONYPI_EVENT_FNKEY_ONLY			41
-#define SONYPI_EVENT_JOGDIAL_FAST_DOWN		42
-#define SONYPI_EVENT_JOGDIAL_FAST_UP		43
-#define SONYPI_EVENT_JOGDIAL_FAST_DOWN_PRESSED	44
-#define SONYPI_EVENT_JOGDIAL_FAST_UP_PRESSED	45
-#define SONYPI_EVENT_JOGDIAL_VFAST_DOWN		46
-#define SONYPI_EVENT_JOGDIAL_VFAST_UP		47
-#define SONYPI_EVENT_JOGDIAL_VFAST_DOWN_PRESSED	48
-#define SONYPI_EVENT_JOGDIAL_VFAST_UP_PRESSED	49
-#define SONYPI_EVENT_ZOOM_PRESSED		50
-#define SONYPI_EVENT_THUMBPHRASE_PRESSED	51
-#define SONYPI_EVENT_MEYE_FACE			52
-#define SONYPI_EVENT_MEYE_OPPOSITE		53
-#define SONYPI_EVENT_MEMORYSTICK_INSERT		54
-#define SONYPI_EVENT_MEMORYSTICK_EJECT		55
-#define SONYPI_EVENT_ANYBUTTON_RELEASED		56
-#define SONYPI_EVENT_BATTERY_INSERT		57
-#define SONYPI_EVENT_BATTERY_REMOVE		58
-#define SONYPI_EVENT_FNKEY_RELEASED		59
-#define SONYPI_EVENT_WIRELESS_ON		60
-#define SONYPI_EVENT_WIRELESS_OFF		61
-#define SONYPI_EVENT_ZOOM_IN_PRESSED		62
-#define SONYPI_EVENT_ZOOM_OUT_PRESSED		63
-#define SONYPI_EVENT_CD_EJECT_PRESSED		64
-#define SONYPI_EVENT_MODEKEY_PRESSED		65
-#define SONYPI_EVENT_PKEY_P4			66
-#define SONYPI_EVENT_PKEY_P5			67
-#define SONYPI_EVENT_SETTINGKEY_PRESSED		68
-#define SONYPI_EVENT_VOLUME_INC_PRESSED		69
-#define SONYPI_EVENT_VOLUME_DEC_PRESSED		70
-#define SONYPI_EVENT_BRIGHTNESS_PRESSED		71
-#define SONYPI_EVENT_MEDIA_PRESSED		72
-#define SONYPI_EVENT_VENDOR_PRESSED		73
-
-/* get/set brightness */
-#define SONYPI_IOCGBRT		_IOR('v', 0, __u8)
-#define SONYPI_IOCSBRT		_IOW('v', 0, __u8)
-
-/* get battery full capacity/remaining capacity */
-#define SONYPI_IOCGBAT1CAP	_IOR('v', 2, __u16)
-#define SONYPI_IOCGBAT1REM	_IOR('v', 3, __u16)
-#define SONYPI_IOCGBAT2CAP	_IOR('v', 4, __u16)
-#define SONYPI_IOCGBAT2REM	_IOR('v', 5, __u16)
-
-/* get battery flags: battery1/battery2/ac adapter present */
-#define SONYPI_BFLAGS_B1	0x01
-#define SONYPI_BFLAGS_B2	0x02
-#define SONYPI_BFLAGS_AC	0x04
-#define SONYPI_IOCGBATFLAGS	_IOR('v', 7, __u8)
-
-/* get/set bluetooth subsystem state on/off */
-#define SONYPI_IOCGBLUE		_IOR('v', 8, __u8)
-#define SONYPI_IOCSBLUE		_IOW('v', 9, __u8)
-
-/* get/set fan state on/off */
-#define SONYPI_IOCGFAN		_IOR('v', 10, __u8)
-#define SONYPI_IOCSFAN		_IOW('v', 11, __u8)
-
-/* get temperature (C) */
-#define SONYPI_IOCGTEMP		_IOR('v', 12, __u8)
-
-#ifdef __KERNEL__
-
-/* used only for communication between v4l and sonypi */
-
-#define SONYPI_COMMAND_GETCAMERA		 1	/* obsolete */
-#define SONYPI_COMMAND_SETCAMERA		 2
-#define SONYPI_COMMAND_GETCAMERABRIGHTNESS	 3	/* obsolete */
-#define SONYPI_COMMAND_SETCAMERABRIGHTNESS	 4
-#define SONYPI_COMMAND_GETCAMERACONTRAST	 5	/* obsolete */
-#define SONYPI_COMMAND_SETCAMERACONTRAST	 6
-#define SONYPI_COMMAND_GETCAMERAHUE		 7	/* obsolete */
-#define SONYPI_COMMAND_SETCAMERAHUE		 8
-#define SONYPI_COMMAND_GETCAMERACOLOR		 9	/* obsolete */
-#define SONYPI_COMMAND_SETCAMERACOLOR		10
-#define SONYPI_COMMAND_GETCAMERASHARPNESS	11	/* obsolete */
-#define SONYPI_COMMAND_SETCAMERASHARPNESS	12
-#define SONYPI_COMMAND_GETCAMERAPICTURE		13	/* obsolete */
-#define SONYPI_COMMAND_SETCAMERAPICTURE		14
-#define SONYPI_COMMAND_GETCAMERAAGC		15	/* obsolete */
-#define SONYPI_COMMAND_SETCAMERAAGC		16
-#define SONYPI_COMMAND_GETCAMERADIRECTION	17	/* obsolete */
-#define SONYPI_COMMAND_GETCAMERAROMVERSION	18	/* obsolete */
-#define SONYPI_COMMAND_GETCAMERAREVISION	19	/* obsolete */
-
-#endif				/* __KERNEL__ */
-
-#endif				/* _SONYPI_H_ */
diff --git a/ANDROID_3.4.5/include/linux/sort.h b/ANDROID_3.4.5/include/linux/sort.h
deleted file mode 100644
index d534da2b..00000000
--- a/ANDROID_3.4.5/include/linux/sort.h
+++ /dev/null
@@ -1,10 +0,0 @@
-#ifndef _LINUX_SORT_H
-#define _LINUX_SORT_H
-
-#include <linux/types.h>
-
-void sort(void *base, size_t num, size_t size,
-	  int (*cmp)(const void *, const void *),
-	  void (*swap)(void *, void *, int));
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/sound.h b/ANDROID_3.4.5/include/linux/sound.h
deleted file mode 100644
index fae20ba0..00000000
--- a/ANDROID_3.4.5/include/linux/sound.h
+++ /dev/null
@@ -1,48 +0,0 @@
-#ifndef _LINUX_SOUND_H
-#define _LINUX_SOUND_H
-
-/*
- * Minor numbers for the sound driver.
- */
-
-#include <linux/fs.h>
-
-#define SND_DEV_CTL		0	/* Control port /dev/mixer */
-#define SND_DEV_SEQ		1	/* Sequencer output /dev/sequencer (FM
-						synthesizer and MIDI output) */
-#define SND_DEV_MIDIN		2	/* Raw midi access */
-#define SND_DEV_DSP		3	/* Digitized voice /dev/dsp */
-#define SND_DEV_AUDIO		4	/* Sparc compatible /dev/audio */
-#define SND_DEV_DSP16		5	/* Like /dev/dsp but 16 bits/sample */
-/* #define SND_DEV_STATUS	6 */	/* /dev/sndstat (obsolete) */
-#define SND_DEV_UNUSED		6
-#define SND_DEV_AWFM		7	/* Reserved */
-#define SND_DEV_SEQ2		8	/* /dev/sequencer, level 2 interface */
-/* #define SND_DEV_SNDPROC	9 */	/* /dev/sndproc for programmable devices (not used) */
-/* #define SND_DEV_DMMIDI	9 */
-#define SND_DEV_SYNTH		9	/* Raw synth access /dev/synth (same as /dev/dmfm) */
-#define SND_DEV_DMFM		10	/* Raw synth access /dev/dmfm */
-#define SND_DEV_UNKNOWN11	11
-#define SND_DEV_ADSP		12	/* Like /dev/dsp (obsolete) */
-#define SND_DEV_AMIDI		13	/* Like /dev/midi (obsolete) */
-#define SND_DEV_ADMMIDI		14	/* Like /dev/dmmidi (onsolete) */
-
-#ifdef __KERNEL__
-/*
- *	Sound core interface functions
- */
- 
-struct device;
-extern int register_sound_special(const struct file_operations *fops, int unit);
-extern int register_sound_special_device(const struct file_operations *fops, int unit, struct device *dev);
-extern int register_sound_mixer(const struct file_operations *fops, int dev);
-extern int register_sound_midi(const struct file_operations *fops, int dev);
-extern int register_sound_dsp(const struct file_operations *fops, int dev);
-
-extern void unregister_sound_special(int unit);
-extern void unregister_sound_mixer(int unit);
-extern void unregister_sound_midi(int unit);
-extern void unregister_sound_dsp(int unit);
-#endif /* __KERNEL__ */
-
-#endif /* _LINUX_SOUND_H */
diff --git a/ANDROID_3.4.5/include/linux/soundcard.h b/ANDROID_3.4.5/include/linux/soundcard.h
deleted file mode 100644
index dfcf86f0..00000000
--- a/ANDROID_3.4.5/include/linux/soundcard.h
+++ /dev/null
@@ -1,1292 +0,0 @@
-#ifndef SOUNDCARD_H
-#define SOUNDCARD_H
-/*
- * Copyright by Hannu Savolainen 1993-1997
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are
- * met: 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer. 2.
- * Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
- * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-
-/*
- * OSS interface version. With versions earlier than 3.6 this value is
- * an integer with value less than 361. In versions 3.6 and later
- * it's a six digit hexadecimal value. For example value
- * of 0x030600 represents OSS version 3.6.0.
- * Use ioctl(fd, OSS_GETVERSION, &int) to get the version number of
- * the currently active driver.
- */
-#define SOUND_VERSION	0x030802
-#define OPEN_SOUND_SYSTEM
-
-/* In Linux we need to be prepared for cross compiling */
-#include <linux/ioctl.h>
-
-/* Endian macros. */
-#ifdef __KERNEL__
-#  include <asm/byteorder.h>
-#else
-#  include <endian.h>
-#endif
-
-/*
- *	Supported card ID numbers (Should be somewhere else?)
- */
-
-#define SNDCARD_ADLIB		1
-#define SNDCARD_SB		2
-#define SNDCARD_PAS		3
-#define SNDCARD_GUS		4
-#define SNDCARD_MPU401		5
-#define SNDCARD_SB16		6
-#define SNDCARD_SB16MIDI	7
-#define SNDCARD_UART6850	8
-#define SNDCARD_GUS16		9
-#define SNDCARD_MSS		10
-#define SNDCARD_PSS     	11
-#define SNDCARD_SSCAPE		12
-#define SNDCARD_PSS_MPU     	13
-#define SNDCARD_PSS_MSS     	14
-#define SNDCARD_SSCAPE_MSS	15
-#define SNDCARD_TRXPRO		16
-#define SNDCARD_TRXPRO_SB	17
-#define SNDCARD_TRXPRO_MPU	18
-#define SNDCARD_MAD16		19
-#define SNDCARD_MAD16_MPU	20
-#define SNDCARD_CS4232		21
-#define SNDCARD_CS4232_MPU	22
-#define SNDCARD_MAUI		23
-#define SNDCARD_PSEUDO_MSS	24
-#define SNDCARD_GUSPNP		25
-#define SNDCARD_UART401		26
-/* Sound card numbers 27 to N are reserved. Don't add more numbers here. */
-
-/***********************************
- * IOCTL Commands for /dev/sequencer
- */
-
-#ifndef _SIOWR
-#if defined(_IOWR) && (defined(_AIX) || (!defined(sun) && !defined(sparc) && !defined(__sparc__) && !defined(__INCioctlh) && !defined(__Lynx__)))
-/* Use already defined ioctl defines if they exist (except with Sun or Sparc) */
-#define	SIOCPARM_MASK	IOCPARM_MASK
-#define	SIOC_VOID	IOC_VOID
-#define	SIOC_OUT	IOC_OUT
-#define	SIOC_IN		IOC_IN
-#define	SIOC_INOUT	IOC_INOUT
-#define _SIOC_SIZE	_IOC_SIZE
-#define _SIOC_DIR	_IOC_DIR
-#define _SIOC_NONE	_IOC_NONE
-#define _SIOC_READ	_IOC_READ
-#define _SIOC_WRITE	_IOC_WRITE
-#define	_SIO		_IO
-#define	_SIOR		_IOR
-#define	_SIOW		_IOW
-#define	_SIOWR		_IOWR
-#else
-
-/* Ioctl's have the command encoded in the lower word,
- * and the size of any in or out parameters in the upper
- * word.  The high 2 bits of the upper word are used
- * to encode the in/out status of the parameter; for now
- * we restrict parameters to at most 8191 bytes.
- */
-/* #define	SIOCTYPE		(0xff<<8) */
-#define	SIOCPARM_MASK	0x1fff		/* parameters must be < 8192 bytes */
-#define	SIOC_VOID	0x00000000	/* no parameters */
-#define	SIOC_OUT	0x20000000	/* copy out parameters */
-#define	SIOC_IN		0x40000000	/* copy in parameters */
-#define	SIOC_INOUT	(SIOC_IN|SIOC_OUT)
-/* the 0x20000000 is so we can distinguish new ioctl's from old */
-#define	_SIO(x,y)	((int)(SIOC_VOID|(x<<8)|y))
-#define	_SIOR(x,y,t)	((int)(SIOC_OUT|((sizeof(t)&SIOCPARM_MASK)<<16)|(x<<8)|y))
-#define	_SIOW(x,y,t)	((int)(SIOC_IN|((sizeof(t)&SIOCPARM_MASK)<<16)|(x<<8)|y))
-/* this should be _SIORW, but stdio got there first */
-#define	_SIOWR(x,y,t)	((int)(SIOC_INOUT|((sizeof(t)&SIOCPARM_MASK)<<16)|(x<<8)|y))
-#define _SIOC_SIZE(x)	((x>>16)&SIOCPARM_MASK)	
-#define _SIOC_DIR(x)	(x & 0xf0000000)
-#define _SIOC_NONE	SIOC_VOID
-#define _SIOC_READ	SIOC_OUT
-#define _SIOC_WRITE	SIOC_IN
-#  endif /* _IOWR */
-#endif  /* !_SIOWR */
-
-#define SNDCTL_SEQ_RESET		_SIO  ('Q', 0)
-#define SNDCTL_SEQ_SYNC			_SIO  ('Q', 1)
-#define SNDCTL_SYNTH_INFO		_SIOWR('Q', 2, struct synth_info)
-#define SNDCTL_SEQ_CTRLRATE		_SIOWR('Q', 3, int)	/* Set/get timer resolution (HZ) */
-#define SNDCTL_SEQ_GETOUTCOUNT		_SIOR ('Q', 4, int)
-#define SNDCTL_SEQ_GETINCOUNT		_SIOR ('Q', 5, int)
-#define SNDCTL_SEQ_PERCMODE		_SIOW ('Q', 6, int)
-#define SNDCTL_FM_LOAD_INSTR		_SIOW ('Q', 7, struct sbi_instrument)	/* Obsolete. Don't use!!!!!! */
-#define SNDCTL_SEQ_TESTMIDI		_SIOW ('Q', 8, int)
-#define SNDCTL_SEQ_RESETSAMPLES		_SIOW ('Q', 9, int)
-#define SNDCTL_SEQ_NRSYNTHS		_SIOR ('Q',10, int)
-#define SNDCTL_SEQ_NRMIDIS		_SIOR ('Q',11, int)
-#define SNDCTL_MIDI_INFO		_SIOWR('Q',12, struct midi_info)
-#define SNDCTL_SEQ_THRESHOLD		_SIOW ('Q',13, int)
-#define SNDCTL_SYNTH_MEMAVL		_SIOWR('Q',14, int)	/* in=dev#, out=memsize */
-#define SNDCTL_FM_4OP_ENABLE		_SIOW ('Q',15, int)	/* in=dev# */
-#define SNDCTL_SEQ_PANIC		_SIO  ('Q',17)
-#define SNDCTL_SEQ_OUTOFBAND		_SIOW ('Q',18, struct seq_event_rec)
-#define SNDCTL_SEQ_GETTIME		_SIOR ('Q',19, int)
-#define SNDCTL_SYNTH_ID			_SIOWR('Q',20, struct synth_info)
-#define SNDCTL_SYNTH_CONTROL		_SIOWR('Q',21, struct synth_control)
-#define SNDCTL_SYNTH_REMOVESAMPLE	_SIOWR('Q',22, struct remove_sample)
-
-typedef struct synth_control
-{
-	int devno;	/* Synthesizer # */
-	char data[4000]; /* Device spesific command/data record */
-}synth_control;
-
-typedef struct remove_sample
-{
-	int devno;	/* Synthesizer # */
-	int bankno;	/* MIDI bank # (0=General MIDI) */
-	int instrno;	/* MIDI instrument number */
-} remove_sample;
-
-typedef struct seq_event_rec {
-		unsigned char arr[8];
-} seq_event_rec;
-
-#define SNDCTL_TMR_TIMEBASE		_SIOWR('T', 1, int)
-#define SNDCTL_TMR_START		_SIO  ('T', 2)
-#define SNDCTL_TMR_STOP			_SIO  ('T', 3)
-#define SNDCTL_TMR_CONTINUE		_SIO  ('T', 4)
-#define SNDCTL_TMR_TEMPO		_SIOWR('T', 5, int)
-#define SNDCTL_TMR_SOURCE		_SIOWR('T', 6, int)
-#	define TMR_INTERNAL		0x00000001
-#	define TMR_EXTERNAL		0x00000002
-#		define TMR_MODE_MIDI	0x00000010
-#		define TMR_MODE_FSK	0x00000020
-#		define TMR_MODE_CLS	0x00000040
-#		define TMR_MODE_SMPTE	0x00000080
-#define SNDCTL_TMR_METRONOME		_SIOW ('T', 7, int)
-#define SNDCTL_TMR_SELECT		_SIOW ('T', 8, int)
-
-/*
- * Some big endian/little endian handling macros
- */
-
-#define _LINUX_PATCHKEY_H_INDIRECT
-#include <linux/patchkey.h>
-#undef _LINUX_PATCHKEY_H_INDIRECT
-
-#if defined(__KERNEL__)
-#  if defined(__BIG_ENDIAN)
-#    define AFMT_S16_NE AFMT_S16_BE
-#  elif defined(__LITTLE_ENDIAN)
-#    define AFMT_S16_NE AFMT_S16_LE
-#  else
-#    error "could not determine byte order"
-#  endif
-#else
-# if defined(__BYTE_ORDER)
-#  if __BYTE_ORDER == __BIG_ENDIAN
-#    define AFMT_S16_NE AFMT_S16_BE
-#  elif __BYTE_ORDER == __LITTLE_ENDIAN
-#    define AFMT_S16_NE AFMT_S16_LE
-#  else
-#    error "could not determine byte order"
-#  endif
-# endif
-#endif
-
-/*
- *	Sample loading mechanism for internal synthesizers (/dev/sequencer)
- *	The following patch_info structure has been designed to support
- *	Gravis UltraSound. It tries to be universal format for uploading
- *	sample based patches but is probably too limited.
- *
- *      (PBD) As Hannu guessed, the GUS structure is too limited for 
- *      the WaveFront, but this is the right place for a constant definition.
- */
-
-struct patch_info {
-		unsigned short key;		/* Use WAVE_PATCH here */
-#define WAVE_PATCH	   _PATCHKEY(0x04)
-#define GUS_PATCH	   WAVE_PATCH
-#define WAVEFRONT_PATCH    _PATCHKEY(0x06)
-
-		short device_no;	/* Synthesizer number */
-		short instr_no;		/* Midi pgm# */
-
-		unsigned int mode;
-/*
- * The least significant byte has the same format than the GUS .PAT
- * files
- */
-#define WAVE_16_BITS	0x01	/* bit 0 = 8 or 16 bit wave data. */
-#define WAVE_UNSIGNED	0x02	/* bit 1 = Signed - Unsigned data. */
-#define WAVE_LOOPING	0x04	/* bit 2 = looping enabled-1. */
-#define WAVE_BIDIR_LOOP	0x08	/* bit 3 = Set is bidirectional looping. */
-#define WAVE_LOOP_BACK	0x10	/* bit 4 = Set is looping backward. */
-#define WAVE_SUSTAIN_ON	0x20	/* bit 5 = Turn sustaining on. (Env. pts. 3)*/
-#define WAVE_ENVELOPES	0x40	/* bit 6 = Enable envelopes - 1 */
-#define WAVE_FAST_RELEASE 0x80	/* bit 7 = Shut off immediately after note off */
-				/* 	(use the env_rate/env_offs fields). */
-/* Linux specific bits */
-#define WAVE_VIBRATO	0x00010000	/* The vibrato info is valid */
-#define WAVE_TREMOLO	0x00020000	/* The tremolo info is valid */
-#define WAVE_SCALE	0x00040000	/* The scaling info is valid */
-#define WAVE_FRACTIONS	0x00080000	/* Fraction information is valid */
-/* Reserved bits */
-#define WAVE_ROM	0x40000000	/* For future use */
-#define WAVE_MULAW	0x20000000	/* For future use */
-/* Other bits must be zeroed */
-
-		int len;	/* Size of the wave data in bytes */
-		int loop_start, loop_end; /* Byte offsets from the beginning */
-
-/* 
- * The base_freq and base_note fields are used when computing the
- * playback speed for a note. The base_note defines the tone frequency
- * which is heard if the sample is played using the base_freq as the
- * playback speed.
- *
- * The low_note and high_note fields define the minimum and maximum note
- * frequencies for which this sample is valid. It is possible to define
- * more than one samples for an instrument number at the same time. The
- * low_note and high_note fields are used to select the most suitable one.
- *
- * The fields base_note, high_note and low_note should contain
- * the note frequency multiplied by 1000. For example value for the
- * middle A is 440*1000.
- */
-
-		unsigned int base_freq;
-		unsigned int base_note;
-		unsigned int high_note;
-		unsigned int low_note;
-		int panning;	/* -128=left, 127=right */
-		int detuning;
-
-/*	New fields introduced in version 1.99.5	*/
-
-       /* Envelope. Enabled by mode bit WAVE_ENVELOPES	*/
-		unsigned char	env_rate[ 6 ];	 /* GUS HW ramping rate */
-		unsigned char	env_offset[ 6 ]; /* 255 == 100% */
-
-	/* 
-	 * The tremolo, vibrato and scale info are not supported yet.
-	 * Enable by setting the mode bits WAVE_TREMOLO, WAVE_VIBRATO or
-	 * WAVE_SCALE
-	 */
-
-		unsigned char	tremolo_sweep;
-		unsigned char	tremolo_rate;
-		unsigned char	tremolo_depth;
-	
-		unsigned char	vibrato_sweep;
-		unsigned char	vibrato_rate;
-		unsigned char	vibrato_depth;
-
-		int		scale_frequency;
-		unsigned int	scale_factor;		/* from 0 to 2048 or 0 to 2 */
-	
-	        int		volume;
-		int		fractions;
-		int		reserved1;
-	        int		spare[2];
-		char data[1];	/* The waveform data starts here */
-	};
-
-struct sysex_info {
-		short key;		/* Use SYSEX_PATCH or MAUI_PATCH here */
-#define SYSEX_PATCH	_PATCHKEY(0x05)
-#define MAUI_PATCH	_PATCHKEY(0x06)
-		short device_no;	/* Synthesizer number */
-		int len;	/* Size of the sysex data in bytes */
-		unsigned char data[1];	/* Sysex data starts here */
-	};
-
-/*
- * /dev/sequencer input events.
- *
- * The data written to the /dev/sequencer is a stream of events. Events
- * are records of 4 or 8 bytes. The first byte defines the size. 
- * Any number of events can be written with a write call. There
- * is a set of macros for sending these events. Use these macros if you
- * want to maximize portability of your program.
- *
- * Events SEQ_WAIT, SEQ_MIDIPUTC and SEQ_ECHO. Are also input events.
- * (All input events are currently 4 bytes long. Be prepared to support
- * 8 byte events also. If you receive any event having first byte >= 128,
- * it's a 8 byte event.
- *
- * The events are documented at the end of this file.
- *
- * Normal events (4 bytes)
- * There is also a 8 byte version of most of the 4 byte events. The
- * 8 byte one is recommended.
- */
-#define SEQ_NOTEOFF		0
-#define SEQ_FMNOTEOFF		SEQ_NOTEOFF	/* Just old name */
-#define SEQ_NOTEON		1
-#define	SEQ_FMNOTEON		SEQ_NOTEON
-#define SEQ_WAIT		TMR_WAIT_ABS
-#define SEQ_PGMCHANGE		3
-#define SEQ_FMPGMCHANGE		SEQ_PGMCHANGE
-#define SEQ_SYNCTIMER		TMR_START
-#define SEQ_MIDIPUTC		5
-#define SEQ_DRUMON		6	/*** OBSOLETE ***/
-#define SEQ_DRUMOFF		7	/*** OBSOLETE ***/
-#define SEQ_ECHO		TMR_ECHO	/* For synching programs with output */
-#define SEQ_AFTERTOUCH		9
-#define SEQ_CONTROLLER		10
-
-/*******************************************
- *	Midi controller numbers
- *******************************************
- * Controllers 0 to 31 (0x00 to 0x1f) and
- * 32 to 63 (0x20 to 0x3f) are continuous
- * controllers.
- * In the MIDI 1.0 these controllers are sent using
- * two messages. Controller numbers 0 to 31 are used
- * to send the MSB and the controller numbers 32 to 63
- * are for the LSB. Note that just 7 bits are used in MIDI bytes.
- */
-
-#define	   CTL_BANK_SELECT		0x00
-#define	   CTL_MODWHEEL			0x01
-#define    CTL_BREATH			0x02
-/*		undefined		0x03 */
-#define    CTL_FOOT			0x04
-#define    CTL_PORTAMENTO_TIME		0x05
-#define    CTL_DATA_ENTRY		0x06
-#define    CTL_MAIN_VOLUME		0x07
-#define    CTL_BALANCE			0x08
-/*		undefined		0x09 */
-#define    CTL_PAN			0x0a
-#define    CTL_EXPRESSION		0x0b
-/*		undefined		0x0c */
-/*		undefined		0x0d */
-/*		undefined		0x0e */
-/*		undefined		0x0f */
-#define    CTL_GENERAL_PURPOSE1	0x10
-#define    CTL_GENERAL_PURPOSE2	0x11
-#define    CTL_GENERAL_PURPOSE3	0x12
-#define    CTL_GENERAL_PURPOSE4	0x13
-/*		undefined		0x14 - 0x1f */
-
-/*		undefined		0x20 */
-/* The controller numbers 0x21 to 0x3f are reserved for the */
-/* least significant bytes of the controllers 0x00 to 0x1f. */
-/* These controllers are not recognised by the driver. */
-
-/* Controllers 64 to 69 (0x40 to 0x45) are on/off switches. */
-/* 0=OFF and 127=ON (intermediate values are possible) */
-#define    CTL_DAMPER_PEDAL		0x40
-#define    CTL_SUSTAIN			0x40	/* Alias */
-#define    CTL_HOLD			0x40	/* Alias */
-#define    CTL_PORTAMENTO		0x41
-#define    CTL_SOSTENUTO		0x42
-#define    CTL_SOFT_PEDAL		0x43
-/*		undefined		0x44 */
-#define    CTL_HOLD2			0x45
-/*		undefined		0x46 - 0x4f */
-
-#define    CTL_GENERAL_PURPOSE5	0x50
-#define    CTL_GENERAL_PURPOSE6	0x51
-#define    CTL_GENERAL_PURPOSE7	0x52
-#define    CTL_GENERAL_PURPOSE8	0x53
-/*		undefined		0x54 - 0x5a */
-#define    CTL_EXT_EFF_DEPTH		0x5b
-#define    CTL_TREMOLO_DEPTH		0x5c
-#define    CTL_CHORUS_DEPTH		0x5d
-#define    CTL_DETUNE_DEPTH		0x5e
-#define    CTL_CELESTE_DEPTH		0x5e	/* Alias for the above one */
-#define    CTL_PHASER_DEPTH		0x5f
-#define    CTL_DATA_INCREMENT		0x60
-#define    CTL_DATA_DECREMENT		0x61
-#define    CTL_NONREG_PARM_NUM_LSB	0x62
-#define    CTL_NONREG_PARM_NUM_MSB	0x63
-#define    CTL_REGIST_PARM_NUM_LSB	0x64
-#define    CTL_REGIST_PARM_NUM_MSB	0x65
-/*		undefined		0x66 - 0x78 */
-/*		reserved		0x79 - 0x7f */
-
-/* Pseudo controllers (not midi compatible) */
-#define    CTRL_PITCH_BENDER		255
-#define    CTRL_PITCH_BENDER_RANGE	254
-#define    CTRL_EXPRESSION		253	/* Obsolete */
-#define    CTRL_MAIN_VOLUME		252	/* Obsolete */
-#define SEQ_BALANCE		11
-#define SEQ_VOLMODE             12
-
-/*
- * Volume mode decides how volumes are used
- */
-
-#define VOL_METHOD_ADAGIO	1
-#define VOL_METHOD_LINEAR	2
-
-/*
- * Note! SEQ_WAIT, SEQ_MIDIPUTC and SEQ_ECHO are used also as
- *	 input events.
- */
-
-/*
- * Event codes 0xf0 to 0xfc are reserved for future extensions.
- */
-
-#define SEQ_FULLSIZE		0xfd	/* Long events */
-/*
- *	SEQ_FULLSIZE events are used for loading patches/samples to the
- *	synthesizer devices. These events are passed directly to the driver
- *	of the associated synthesizer device. There is no limit to the size
- *	of the extended events. These events are not queued but executed
- *	immediately when the write() is called (execution can take several
- *	seconds of time). 
- *
- *	When a SEQ_FULLSIZE message is written to the device, it must
- *	be written using exactly one write() call. Other events cannot
- *	be mixed to the same write.
- *	
- *	For FM synths (YM3812/OPL3) use struct sbi_instrument and write it to the 
- *	/dev/sequencer. Don't write other data together with the instrument structure
- *	Set the key field of the structure to FM_PATCH. The device field is used to
- *	route the patch to the corresponding device.
- *
- *	For wave table use struct patch_info. Initialize the key field
- *      to WAVE_PATCH.
- */
-#define SEQ_PRIVATE		0xfe	/* Low level HW dependent events (8 bytes) */
-#define SEQ_EXTENDED		0xff	/* Extended events (8 bytes) OBSOLETE */
-
-/*
- * Record for FM patches
- */
-
-typedef unsigned char sbi_instr_data[32];
-
-struct sbi_instrument {
-		unsigned short	key;	/* FM_PATCH or OPL3_PATCH */
-#define FM_PATCH	_PATCHKEY(0x01)
-#define OPL3_PATCH	_PATCHKEY(0x03)
-		short		device;		/*	Synth# (0-4)	*/
-		int 		channel;	/*	Program# to be initialized 	*/
-		sbi_instr_data	operators;	/*	Register settings for operator cells (.SBI format)	*/
-	};
-
-struct synth_info {	/* Read only */
-		char	name[30];
-		int	device;		/* 0-N. INITIALIZE BEFORE CALLING */
-		int	synth_type;
-#define SYNTH_TYPE_FM			0
-#define SYNTH_TYPE_SAMPLE		1
-#define SYNTH_TYPE_MIDI			2	/* Midi interface */
-
-		int	synth_subtype;
-#define FM_TYPE_ADLIB			0x00
-#define FM_TYPE_OPL3			0x01
-#define MIDI_TYPE_MPU401		0x401
-
-#define SAMPLE_TYPE_BASIC		0x10
-#define SAMPLE_TYPE_GUS			SAMPLE_TYPE_BASIC
-#define SAMPLE_TYPE_WAVEFRONT           0x11
-
-		int	perc_mode;	/* No longer supported */
-		int	nr_voices;
-		int	nr_drums;	/* Obsolete field */
-		int	instr_bank_size;
-		unsigned int	capabilities;	
-#define SYNTH_CAP_PERCMODE		0x00000001 /* No longer used */
-#define SYNTH_CAP_OPL3			0x00000002 /* Set if OPL3 supported */
-#define SYNTH_CAP_INPUT			0x00000004 /* Input (MIDI) device */
-		int	dummies[19];	/* Reserve space */
-	};
-
-struct sound_timer_info {
-		char name[32];
-		int caps;
-	};
-
-#define MIDI_CAP_MPU401		1		/* MPU-401 intelligent mode */
-
-struct midi_info {
-		char		name[30];
-		int		device;		/* 0-N. INITIALIZE BEFORE CALLING */
-		unsigned int	capabilities;	/* To be defined later */
-		int		dev_type;
-		int		dummies[18];	/* Reserve space */
-	};
-
-/********************************************
- * ioctl commands for the /dev/midi##
- */
-typedef struct {
-		unsigned char cmd;
-		char nr_args, nr_returns;
-		unsigned char data[30];
-	} mpu_command_rec;
-
-#define SNDCTL_MIDI_PRETIME		_SIOWR('m', 0, int)
-#define SNDCTL_MIDI_MPUMODE		_SIOWR('m', 1, int)
-#define SNDCTL_MIDI_MPUCMD		_SIOWR('m', 2, mpu_command_rec)
-
-/********************************************
- * IOCTL commands for /dev/dsp and /dev/audio
- */
-
-#define SNDCTL_DSP_RESET		_SIO  ('P', 0)
-#define SNDCTL_DSP_SYNC			_SIO  ('P', 1)
-#define SNDCTL_DSP_SPEED		_SIOWR('P', 2, int)
-#define SNDCTL_DSP_STEREO		_SIOWR('P', 3, int)
-#define SNDCTL_DSP_GETBLKSIZE		_SIOWR('P', 4, int)
-#define SNDCTL_DSP_SAMPLESIZE		SNDCTL_DSP_SETFMT
-#define SNDCTL_DSP_CHANNELS		_SIOWR('P', 6, int)
-#define SOUND_PCM_WRITE_CHANNELS	SNDCTL_DSP_CHANNELS
-#define SOUND_PCM_WRITE_FILTER		_SIOWR('P', 7, int)
-#define SNDCTL_DSP_POST			_SIO  ('P', 8)
-#define SNDCTL_DSP_SUBDIVIDE		_SIOWR('P', 9, int)
-#define SNDCTL_DSP_SETFRAGMENT		_SIOWR('P',10, int)
-
-/*	Audio data formats (Note! U8=8 and S16_LE=16 for compatibility) */
-#define SNDCTL_DSP_GETFMTS		_SIOR ('P',11, int) /* Returns a mask */
-#define SNDCTL_DSP_SETFMT		_SIOWR('P',5, int) /* Selects ONE fmt*/
-#	define AFMT_QUERY		0x00000000	/* Return current fmt */
-#	define AFMT_MU_LAW		0x00000001
-#	define AFMT_A_LAW		0x00000002
-#	define AFMT_IMA_ADPCM		0x00000004
-#	define AFMT_U8			0x00000008
-#	define AFMT_S16_LE		0x00000010	/* Little endian signed 16*/
-#	define AFMT_S16_BE		0x00000020	/* Big endian signed 16 */
-#	define AFMT_S8			0x00000040
-#	define AFMT_U16_LE		0x00000080	/* Little endian U16 */
-#	define AFMT_U16_BE		0x00000100	/* Big endian U16 */
-#	define AFMT_MPEG		0x00000200	/* MPEG (2) audio */
-#	define AFMT_AC3		0x00000400	/* Dolby Digital AC3 */
-
-/*
- * Buffer status queries.
- */
-typedef struct audio_buf_info {
-			int fragments;	/* # of available fragments (partially usend ones not counted) */
-			int fragstotal;	/* Total # of fragments allocated */
-			int fragsize;	/* Size of a fragment in bytes */
-
-			int bytes;	/* Available space in bytes (includes partially used fragments) */
-			/* Note! 'bytes' could be more than fragments*fragsize */
-		} audio_buf_info;
-
-#define SNDCTL_DSP_GETOSPACE		_SIOR ('P',12, audio_buf_info)
-#define SNDCTL_DSP_GETISPACE		_SIOR ('P',13, audio_buf_info)
-#define SNDCTL_DSP_NONBLOCK		_SIO  ('P',14)
-#define SNDCTL_DSP_GETCAPS		_SIOR ('P',15, int)
-#	define DSP_CAP_REVISION		0x000000ff	/* Bits for revision level (0 to 255) */
-#	define DSP_CAP_DUPLEX		0x00000100	/* Full duplex record/playback */
-#	define DSP_CAP_REALTIME		0x00000200	/* Real time capability */
-#	define DSP_CAP_BATCH		0x00000400	/* Device has some kind of */
-							/* internal buffers which may */
-							/* cause some delays and */
-							/* decrease precision of timing */
-#	define DSP_CAP_COPROC		0x00000800	/* Has a coprocessor */
-							/* Sometimes it's a DSP */
-							/* but usually not */
-#	define DSP_CAP_TRIGGER		0x00001000	/* Supports SETTRIGGER */
-#	define DSP_CAP_MMAP		0x00002000	/* Supports mmap() */
-#	define DSP_CAP_MULTI		0x00004000	/* support multiple open */
-#	define DSP_CAP_BIND		0x00008000	/* channel binding to front/rear/cneter/lfe */
-
-
-#define SNDCTL_DSP_GETTRIGGER		_SIOR ('P',16, int)
-#define SNDCTL_DSP_SETTRIGGER		_SIOW ('P',16, int)
-#	define PCM_ENABLE_INPUT		0x00000001
-#	define PCM_ENABLE_OUTPUT		0x00000002
-
-typedef struct count_info {
-		int bytes;	/* Total # of bytes processed */
-		int blocks;	/* # of fragment transitions since last time */
-		int ptr;	/* Current DMA pointer value */
-	} count_info;
-
-#define SNDCTL_DSP_GETIPTR		_SIOR ('P',17, count_info)
-#define SNDCTL_DSP_GETOPTR		_SIOR ('P',18, count_info)
-
-typedef struct buffmem_desc {
-		unsigned *buffer;
-		int size;
-	} buffmem_desc;
-#define SNDCTL_DSP_MAPINBUF		_SIOR ('P', 19, buffmem_desc)
-#define SNDCTL_DSP_MAPOUTBUF		_SIOR ('P', 20, buffmem_desc)
-#define SNDCTL_DSP_SETSYNCRO		_SIO  ('P', 21)
-#define SNDCTL_DSP_SETDUPLEX		_SIO  ('P', 22)
-#define SNDCTL_DSP_GETODELAY		_SIOR ('P', 23, int)
-
-#define SNDCTL_DSP_GETCHANNELMASK		_SIOWR('P', 64, int)
-#define SNDCTL_DSP_BIND_CHANNEL		_SIOWR('P', 65, int)
-#	define DSP_BIND_QUERY		0x00000000
-#	define DSP_BIND_FRONT		0x00000001
-#	define DSP_BIND_SURR		0x00000002
-#	define DSP_BIND_CENTER_LFE	0x00000004
-#	define DSP_BIND_HANDSET		0x00000008
-#	define DSP_BIND_MIC		0x00000010
-#	define DSP_BIND_MODEM1		0x00000020
-#	define DSP_BIND_MODEM2		0x00000040
-#	define DSP_BIND_I2S		0x00000080
-#	define DSP_BIND_SPDIF		0x00000100
-
-#define SNDCTL_DSP_SETSPDIF		_SIOW ('P', 66, int)
-#define SNDCTL_DSP_GETSPDIF		_SIOR ('P', 67, int)
-#	define SPDIF_PRO	0x0001
-#	define SPDIF_N_AUD	0x0002
-#	define SPDIF_COPY	0x0004
-#	define SPDIF_PRE	0x0008
-#	define SPDIF_CC		0x07f0
-#	define SPDIF_L		0x0800
-#	define SPDIF_DRS	0x4000
-#	define SPDIF_V		0x8000
-
-/*
- * Application's profile defines the way how playback underrun situations should be handled.
- * 
- *	APF_NORMAL (the default) and APF_NETWORK make the driver to cleanup the
- *	playback buffer whenever an underrun occurs. This consumes some time
- *	prevents looping the existing buffer.
- *	APF_CPUINTENS is intended to be set by CPU intensive applications which
- *	are likely to run out of time occasionally. In this mode the buffer cleanup is
- *	disabled which saves CPU time but also let's the previous buffer content to
- *	be played during the "pause" after the underrun.
- */
-#define SNDCTL_DSP_PROFILE		_SIOW ('P', 23, int)
-#define	  APF_NORMAL	0	/* Normal applications */
-#define	  APF_NETWORK	1	/* Underruns probably caused by an "external" delay */
-#define   APF_CPUINTENS 2	/* Underruns probably caused by "overheating" the CPU */
-
-#define SOUND_PCM_READ_RATE		_SIOR ('P', 2, int)
-#define SOUND_PCM_READ_CHANNELS		_SIOR ('P', 6, int)
-#define SOUND_PCM_READ_BITS		_SIOR ('P', 5, int)
-#define SOUND_PCM_READ_FILTER		_SIOR ('P', 7, int)
-
-/* Some alias names */
-#define SOUND_PCM_WRITE_BITS		SNDCTL_DSP_SETFMT
-#define SOUND_PCM_WRITE_RATE		SNDCTL_DSP_SPEED
-#define SOUND_PCM_POST			SNDCTL_DSP_POST
-#define SOUND_PCM_RESET			SNDCTL_DSP_RESET
-#define SOUND_PCM_SYNC			SNDCTL_DSP_SYNC
-#define SOUND_PCM_SUBDIVIDE		SNDCTL_DSP_SUBDIVIDE
-#define SOUND_PCM_SETFRAGMENT		SNDCTL_DSP_SETFRAGMENT
-#define SOUND_PCM_GETFMTS		SNDCTL_DSP_GETFMTS
-#define SOUND_PCM_SETFMT		SNDCTL_DSP_SETFMT
-#define SOUND_PCM_GETOSPACE		SNDCTL_DSP_GETOSPACE
-#define SOUND_PCM_GETISPACE		SNDCTL_DSP_GETISPACE
-#define SOUND_PCM_NONBLOCK		SNDCTL_DSP_NONBLOCK
-#define SOUND_PCM_GETCAPS		SNDCTL_DSP_GETCAPS
-#define SOUND_PCM_GETTRIGGER		SNDCTL_DSP_GETTRIGGER
-#define SOUND_PCM_SETTRIGGER		SNDCTL_DSP_SETTRIGGER
-#define SOUND_PCM_SETSYNCRO		SNDCTL_DSP_SETSYNCRO
-#define SOUND_PCM_GETIPTR		SNDCTL_DSP_GETIPTR
-#define SOUND_PCM_GETOPTR		SNDCTL_DSP_GETOPTR
-#define SOUND_PCM_MAPINBUF		SNDCTL_DSP_MAPINBUF
-#define SOUND_PCM_MAPOUTBUF		SNDCTL_DSP_MAPOUTBUF
-
-/*
- * ioctl calls to be used in communication with coprocessors and
- * DSP chips.
- */
-
-typedef struct copr_buffer {
-		int command;	/* Set to 0 if not used */
-		int flags;
-#define CPF_NONE		0x0000
-#define CPF_FIRST		0x0001	/* First block */
-#define CPF_LAST		0x0002	/* Last block */
-		int len;
-		int offs;	/* If required by the device (0 if not used) */
-
-		unsigned char data[4000]; /* NOTE! 4000 is not 4k */
-	} copr_buffer;
-
-typedef struct copr_debug_buf {
-		int command;	/* Used internally. Set to 0 */
-		int parm1;
-		int parm2;
-		int flags;	
-		int len;	/* Length of data in bytes */
-	} copr_debug_buf;
-
-typedef struct copr_msg {
-		int len;
-		unsigned char data[4000];
-	} copr_msg;
-
-#define SNDCTL_COPR_RESET             _SIO  ('C',  0)
-#define SNDCTL_COPR_LOAD	      _SIOWR('C',  1, copr_buffer)
-#define SNDCTL_COPR_RDATA	      _SIOWR('C',  2, copr_debug_buf)
-#define SNDCTL_COPR_RCODE	      _SIOWR('C',  3, copr_debug_buf)
-#define SNDCTL_COPR_WDATA	      _SIOW ('C',  4, copr_debug_buf)
-#define SNDCTL_COPR_WCODE	      _SIOW ('C',  5, copr_debug_buf)
-#define SNDCTL_COPR_RUN		      _SIOWR('C',  6, copr_debug_buf)
-#define SNDCTL_COPR_HALT	      _SIOWR('C',  7, copr_debug_buf)
-#define SNDCTL_COPR_SENDMSG	      _SIOWR('C',  8, copr_msg)
-#define SNDCTL_COPR_RCVMSG	      _SIOR ('C',  9, copr_msg)
-
-/*********************************************
- * IOCTL commands for /dev/mixer
- */
-	
-/* 
- * Mixer devices
- *
- * There can be up to 20 different analog mixer channels. The
- * SOUND_MIXER_NRDEVICES gives the currently supported maximum. 
- * The SOUND_MIXER_READ_DEVMASK returns a bitmask which tells
- * the devices supported by the particular mixer.
- */
-
-#define SOUND_MIXER_NRDEVICES	25
-#define SOUND_MIXER_VOLUME	0
-#define SOUND_MIXER_BASS	1
-#define SOUND_MIXER_TREBLE	2
-#define SOUND_MIXER_SYNTH	3
-#define SOUND_MIXER_PCM		4
-#define SOUND_MIXER_SPEAKER	5
-#define SOUND_MIXER_LINE	6
-#define SOUND_MIXER_MIC		7
-#define SOUND_MIXER_CD		8
-#define SOUND_MIXER_IMIX	9	/*  Recording monitor  */
-#define SOUND_MIXER_ALTPCM	10
-#define SOUND_MIXER_RECLEV	11	/* Recording level */
-#define SOUND_MIXER_IGAIN	12	/* Input gain */
-#define SOUND_MIXER_OGAIN	13	/* Output gain */
-/* 
- * The AD1848 codec and compatibles have three line level inputs
- * (line, aux1 and aux2). Since each card manufacturer have assigned
- * different meanings to these inputs, it's inpractical to assign
- * specific meanings (line, cd, synth etc.) to them.
- */
-#define SOUND_MIXER_LINE1	14	/* Input source 1  (aux1) */
-#define SOUND_MIXER_LINE2	15	/* Input source 2  (aux2) */
-#define SOUND_MIXER_LINE3	16	/* Input source 3  (line) */
-#define SOUND_MIXER_DIGITAL1	17	/* Digital (input) 1 */
-#define SOUND_MIXER_DIGITAL2	18	/* Digital (input) 2 */
-#define SOUND_MIXER_DIGITAL3	19	/* Digital (input) 3 */
-#define SOUND_MIXER_PHONEIN	20	/* Phone input */
-#define SOUND_MIXER_PHONEOUT	21	/* Phone output */
-#define SOUND_MIXER_VIDEO	22	/* Video/TV (audio) in */
-#define SOUND_MIXER_RADIO	23	/* Radio in */
-#define SOUND_MIXER_MONITOR	24	/* Monitor (usually mic) volume */
-
-/* Some on/off settings (SOUND_SPECIAL_MIN - SOUND_SPECIAL_MAX) */
-/* Not counted to SOUND_MIXER_NRDEVICES, but use the same number space */
-#define SOUND_ONOFF_MIN		28
-#define SOUND_ONOFF_MAX		30
-
-/* Note!	Number 31 cannot be used since the sign bit is reserved */
-#define SOUND_MIXER_NONE	31
-
-/*
- * The following unsupported macros are no longer functional.
- * Use SOUND_MIXER_PRIVATE# macros in future.
- */
-#define SOUND_MIXER_ENHANCE	SOUND_MIXER_NONE
-#define SOUND_MIXER_MUTE	SOUND_MIXER_NONE
-#define SOUND_MIXER_LOUD	SOUND_MIXER_NONE
-
-
-#define SOUND_DEVICE_LABELS	{"Vol  ", "Bass ", "Trebl", "Synth", "Pcm  ", "Spkr ", "Line ", \
-				 "Mic  ", "CD   ", "Mix  ", "Pcm2 ", "Rec  ", "IGain", "OGain", \
-				 "Line1", "Line2", "Line3", "Digital1", "Digital2", "Digital3", \
-				 "PhoneIn", "PhoneOut", "Video", "Radio", "Monitor"}
-
-#define SOUND_DEVICE_NAMES	{"vol", "bass", "treble", "synth", "pcm", "speaker", "line", \
-				 "mic", "cd", "mix", "pcm2", "rec", "igain", "ogain", \
-				 "line1", "line2", "line3", "dig1", "dig2", "dig3", \
-				 "phin", "phout", "video", "radio", "monitor"}
-
-/*	Device bitmask identifiers	*/
-
-#define SOUND_MIXER_RECSRC	0xff	/* Arg contains a bit for each recording source */
-#define SOUND_MIXER_DEVMASK	0xfe	/* Arg contains a bit for each supported device */
-#define SOUND_MIXER_RECMASK	0xfd	/* Arg contains a bit for each supported recording source */
-#define SOUND_MIXER_CAPS	0xfc
-#	define SOUND_CAP_EXCL_INPUT	0x00000001	/* Only one recording source at a time */
-#define SOUND_MIXER_STEREODEVS	0xfb	/* Mixer channels supporting stereo */
-#define SOUND_MIXER_OUTSRC	0xfa	/* Arg contains a bit for each input source to output */
-#define SOUND_MIXER_OUTMASK	0xf9	/* Arg contains a bit for each supported input source to output */
-
-/*	Device mask bits	*/
-
-#define SOUND_MASK_VOLUME	(1 << SOUND_MIXER_VOLUME)
-#define SOUND_MASK_BASS		(1 << SOUND_MIXER_BASS)
-#define SOUND_MASK_TREBLE	(1 << SOUND_MIXER_TREBLE)
-#define SOUND_MASK_SYNTH	(1 << SOUND_MIXER_SYNTH)
-#define SOUND_MASK_PCM		(1 << SOUND_MIXER_PCM)
-#define SOUND_MASK_SPEAKER	(1 << SOUND_MIXER_SPEAKER)
-#define SOUND_MASK_LINE		(1 << SOUND_MIXER_LINE)
-#define SOUND_MASK_MIC		(1 << SOUND_MIXER_MIC)
-#define SOUND_MASK_CD		(1 << SOUND_MIXER_CD)
-#define SOUND_MASK_IMIX		(1 << SOUND_MIXER_IMIX)
-#define SOUND_MASK_ALTPCM	(1 << SOUND_MIXER_ALTPCM)
-#define SOUND_MASK_RECLEV	(1 << SOUND_MIXER_RECLEV)
-#define SOUND_MASK_IGAIN	(1 << SOUND_MIXER_IGAIN)
-#define SOUND_MASK_OGAIN	(1 << SOUND_MIXER_OGAIN)
-#define SOUND_MASK_LINE1	(1 << SOUND_MIXER_LINE1)
-#define SOUND_MASK_LINE2	(1 << SOUND_MIXER_LINE2)
-#define SOUND_MASK_LINE3	(1 << SOUND_MIXER_LINE3)
-#define SOUND_MASK_DIGITAL1	(1 << SOUND_MIXER_DIGITAL1)
-#define SOUND_MASK_DIGITAL2	(1 << SOUND_MIXER_DIGITAL2)
-#define SOUND_MASK_DIGITAL3	(1 << SOUND_MIXER_DIGITAL3)
-#define SOUND_MASK_PHONEIN	(1 << SOUND_MIXER_PHONEIN)
-#define SOUND_MASK_PHONEOUT	(1 << SOUND_MIXER_PHONEOUT)
-#define SOUND_MASK_RADIO	(1 << SOUND_MIXER_RADIO)
-#define SOUND_MASK_VIDEO	(1 << SOUND_MIXER_VIDEO)
-#define SOUND_MASK_MONITOR	(1 << SOUND_MIXER_MONITOR)
-
-/* Obsolete macros */
-#define SOUND_MASK_MUTE		(1 << SOUND_MIXER_MUTE)
-#define SOUND_MASK_ENHANCE	(1 << SOUND_MIXER_ENHANCE)
-#define SOUND_MASK_LOUD		(1 << SOUND_MIXER_LOUD)
-
-#define MIXER_READ(dev)		_SIOR('M', dev, int)
-#define SOUND_MIXER_READ_VOLUME		MIXER_READ(SOUND_MIXER_VOLUME)
-#define SOUND_MIXER_READ_BASS		MIXER_READ(SOUND_MIXER_BASS)
-#define SOUND_MIXER_READ_TREBLE		MIXER_READ(SOUND_MIXER_TREBLE)
-#define SOUND_MIXER_READ_SYNTH		MIXER_READ(SOUND_MIXER_SYNTH)
-#define SOUND_MIXER_READ_PCM		MIXER_READ(SOUND_MIXER_PCM)
-#define SOUND_MIXER_READ_SPEAKER	MIXER_READ(SOUND_MIXER_SPEAKER)
-#define SOUND_MIXER_READ_LINE		MIXER_READ(SOUND_MIXER_LINE)
-#define SOUND_MIXER_READ_MIC		MIXER_READ(SOUND_MIXER_MIC)
-#define SOUND_MIXER_READ_CD		MIXER_READ(SOUND_MIXER_CD)
-#define SOUND_MIXER_READ_IMIX		MIXER_READ(SOUND_MIXER_IMIX)
-#define SOUND_MIXER_READ_ALTPCM		MIXER_READ(SOUND_MIXER_ALTPCM)
-#define SOUND_MIXER_READ_RECLEV		MIXER_READ(SOUND_MIXER_RECLEV)
-#define SOUND_MIXER_READ_IGAIN		MIXER_READ(SOUND_MIXER_IGAIN)
-#define SOUND_MIXER_READ_OGAIN		MIXER_READ(SOUND_MIXER_OGAIN)
-#define SOUND_MIXER_READ_LINE1		MIXER_READ(SOUND_MIXER_LINE1)
-#define SOUND_MIXER_READ_LINE2		MIXER_READ(SOUND_MIXER_LINE2)
-#define SOUND_MIXER_READ_LINE3		MIXER_READ(SOUND_MIXER_LINE3)
-
-/* Obsolete macros */
-#define SOUND_MIXER_READ_MUTE		MIXER_READ(SOUND_MIXER_MUTE)
-#define SOUND_MIXER_READ_ENHANCE	MIXER_READ(SOUND_MIXER_ENHANCE)
-#define SOUND_MIXER_READ_LOUD		MIXER_READ(SOUND_MIXER_LOUD)
-
-#define SOUND_MIXER_READ_RECSRC		MIXER_READ(SOUND_MIXER_RECSRC)
-#define SOUND_MIXER_READ_DEVMASK	MIXER_READ(SOUND_MIXER_DEVMASK)
-#define SOUND_MIXER_READ_RECMASK	MIXER_READ(SOUND_MIXER_RECMASK)
-#define SOUND_MIXER_READ_STEREODEVS	MIXER_READ(SOUND_MIXER_STEREODEVS)
-#define SOUND_MIXER_READ_CAPS		MIXER_READ(SOUND_MIXER_CAPS)
-
-#define MIXER_WRITE(dev)		_SIOWR('M', dev, int)
-#define SOUND_MIXER_WRITE_VOLUME	MIXER_WRITE(SOUND_MIXER_VOLUME)
-#define SOUND_MIXER_WRITE_BASS		MIXER_WRITE(SOUND_MIXER_BASS)
-#define SOUND_MIXER_WRITE_TREBLE	MIXER_WRITE(SOUND_MIXER_TREBLE)
-#define SOUND_MIXER_WRITE_SYNTH		MIXER_WRITE(SOUND_MIXER_SYNTH)
-#define SOUND_MIXER_WRITE_PCM		MIXER_WRITE(SOUND_MIXER_PCM)
-#define SOUND_MIXER_WRITE_SPEAKER	MIXER_WRITE(SOUND_MIXER_SPEAKER)
-#define SOUND_MIXER_WRITE_LINE		MIXER_WRITE(SOUND_MIXER_LINE)
-#define SOUND_MIXER_WRITE_MIC		MIXER_WRITE(SOUND_MIXER_MIC)
-#define SOUND_MIXER_WRITE_CD		MIXER_WRITE(SOUND_MIXER_CD)
-#define SOUND_MIXER_WRITE_IMIX		MIXER_WRITE(SOUND_MIXER_IMIX)
-#define SOUND_MIXER_WRITE_ALTPCM	MIXER_WRITE(SOUND_MIXER_ALTPCM)
-#define SOUND_MIXER_WRITE_RECLEV	MIXER_WRITE(SOUND_MIXER_RECLEV)
-#define SOUND_MIXER_WRITE_IGAIN		MIXER_WRITE(SOUND_MIXER_IGAIN)
-#define SOUND_MIXER_WRITE_OGAIN		MIXER_WRITE(SOUND_MIXER_OGAIN)
-#define SOUND_MIXER_WRITE_LINE1		MIXER_WRITE(SOUND_MIXER_LINE1)
-#define SOUND_MIXER_WRITE_LINE2		MIXER_WRITE(SOUND_MIXER_LINE2)
-#define SOUND_MIXER_WRITE_LINE3		MIXER_WRITE(SOUND_MIXER_LINE3)
-
-/* Obsolete macros */
-#define SOUND_MIXER_WRITE_MUTE		MIXER_WRITE(SOUND_MIXER_MUTE)
-#define SOUND_MIXER_WRITE_ENHANCE	MIXER_WRITE(SOUND_MIXER_ENHANCE)
-#define SOUND_MIXER_WRITE_LOUD		MIXER_WRITE(SOUND_MIXER_LOUD)
-
-#define SOUND_MIXER_WRITE_RECSRC	MIXER_WRITE(SOUND_MIXER_RECSRC)
-
-typedef struct mixer_info
-{
-  char id[16];
-  char name[32];
-  int  modify_counter;
-  int fillers[10];
-} mixer_info;
-
-typedef struct _old_mixer_info /* Obsolete */
-{
-  char id[16];
-  char name[32];
-} _old_mixer_info;
-
-#define SOUND_MIXER_INFO		_SIOR ('M', 101, mixer_info)
-#define SOUND_OLD_MIXER_INFO		_SIOR ('M', 101, _old_mixer_info)
-
-/*
- * A mechanism for accessing "proprietary" mixer features. This method
- * permits passing 128 bytes of arbitrary data between a mixer application
- * and the mixer driver. Interpretation of the record is defined by
- * the particular mixer driver.
- */
-typedef unsigned char mixer_record[128];
-
-#define SOUND_MIXER_ACCESS		_SIOWR('M', 102, mixer_record)
-
-/*
- * Two ioctls for special souncard function
- */
-#define SOUND_MIXER_AGC  _SIOWR('M', 103, int)
-#define SOUND_MIXER_3DSE  _SIOWR('M', 104, int)
-
-/*
- * The SOUND_MIXER_PRIVATE# commands can be redefined by low level drivers.
- * These features can be used when accessing device specific features.
- */
-#define SOUND_MIXER_PRIVATE1		_SIOWR('M', 111, int)
-#define SOUND_MIXER_PRIVATE2		_SIOWR('M', 112, int)
-#define SOUND_MIXER_PRIVATE3		_SIOWR('M', 113, int)
-#define SOUND_MIXER_PRIVATE4		_SIOWR('M', 114, int)
-#define SOUND_MIXER_PRIVATE5		_SIOWR('M', 115, int)
-
-/*
- * SOUND_MIXER_GETLEVELS and SOUND_MIXER_SETLEVELS calls can be used
- * for querying current mixer settings from the driver and for loading
- * default volume settings _prior_ activating the mixer (loading
- * doesn't affect current state of the mixer hardware). These calls
- * are for internal use only.
- */
-
-typedef struct mixer_vol_table {
-  int num;	/* Index to volume table */
-  char name[32];
-  int levels[32];
-} mixer_vol_table;
-
-#define SOUND_MIXER_GETLEVELS		_SIOWR('M', 116, mixer_vol_table)
-#define SOUND_MIXER_SETLEVELS		_SIOWR('M', 117, mixer_vol_table)
-
-/* 
- * An ioctl for identifying the driver version. It will return value
- * of the SOUND_VERSION macro used when compiling the driver.
- * This call was introduced in OSS version 3.6 and it will not work
- * with earlier versions (returns EINVAL).
- */
-#define OSS_GETVERSION			_SIOR ('M', 118, int)
-
-/*
- * Level 2 event types for /dev/sequencer
- */
-
-/*
- * The 4 most significant bits of byte 0 specify the class of
- * the event: 
- *
- *	0x8X = system level events,
- *	0x9X = device/port specific events, event[1] = device/port,
- *		The last 4 bits give the subtype:
- *			0x02	= Channel event (event[3] = chn).
- *			0x01	= note event (event[4] = note).
- *			(0x01 is not used alone but always with bit 0x02).
- *	       event[2] = MIDI message code (0x80=note off etc.)
- *
- */
-
-#define EV_SEQ_LOCAL		0x80
-#define EV_TIMING		0x81
-#define EV_CHN_COMMON		0x92
-#define EV_CHN_VOICE		0x93
-#define EV_SYSEX		0x94
-/*
- * Event types 200 to 220 are reserved for application use.
- * These numbers will not be used by the driver.
- */
-
-/*
- * Events for event type EV_CHN_VOICE
- */
-
-#define MIDI_NOTEOFF		0x80
-#define MIDI_NOTEON		0x90
-#define MIDI_KEY_PRESSURE	0xA0
-
-/*
- * Events for event type EV_CHN_COMMON
- */
-
-#define MIDI_CTL_CHANGE		0xB0
-#define MIDI_PGM_CHANGE		0xC0
-#define MIDI_CHN_PRESSURE	0xD0
-#define MIDI_PITCH_BEND		0xE0
-
-#define MIDI_SYSTEM_PREFIX	0xF0
-
-/*
- * Timer event types
- */
-#define TMR_WAIT_REL		1	/* Time relative to the prev time */
-#define TMR_WAIT_ABS		2	/* Absolute time since TMR_START */
-#define TMR_STOP		3
-#define TMR_START		4
-#define TMR_CONTINUE		5
-#define TMR_TEMPO		6
-#define TMR_ECHO		8
-#define TMR_CLOCK		9	/* MIDI clock */
-#define TMR_SPP			10	/* Song position pointer */
-#define TMR_TIMESIG		11	/* Time signature */
-
-/*
- *	Local event types
- */
-#define LOCL_STARTAUDIO		1
-
-#if !defined(__KERNEL__) || defined(USE_SEQ_MACROS)
-/*
- *	Some convenience macros to simplify programming of the
- *	/dev/sequencer interface
- *
- *	This is a legacy interface for applications written against
- *	the OSSlib-3.8 style interface. It is no longer possible
- *	to actually link against OSSlib with this header, but we
- *	still provide these macros for programs using them.
- *
- *	If you want to use OSSlib, it is recommended that you get
- *	the GPL version of OSS-4.x and build against that version
- *	of the header.
- *
- *	We redefine the extern keyword so that make headers_check
- *	does not complain about SEQ_USE_EXTBUF.
- */
-#define SEQ_DECLAREBUF()		SEQ_USE_EXTBUF()
-
-void seqbuf_dump(void);	/* This function must be provided by programs */
-
-#define SEQ_PM_DEFINES int __foo_bar___
-
-#define SEQ_LOAD_GMINSTR(dev, instr)
-#define SEQ_LOAD_GMDRUM(dev, drum)
-
-#define _SEQ_EXTERN extern
-#define SEQ_USE_EXTBUF() \
-		_SEQ_EXTERN unsigned char _seqbuf[]; \
-		_SEQ_EXTERN int _seqbuflen; _SEQ_EXTERN int _seqbufptr
-
-#ifndef USE_SIMPLE_MACROS
-/* Sample seqbuf_dump() implementation:
- *
- *	SEQ_DEFINEBUF (2048);	-- Defines a buffer for 2048 bytes
- *
- *	int seqfd;		-- The file descriptor for /dev/sequencer.
- *
- *	void
- *	seqbuf_dump ()
- *	{
- *	  if (_seqbufptr)
- *	    if (write (seqfd, _seqbuf, _seqbufptr) == -1)
- *	      {
- *		perror ("write /dev/sequencer");
- *		exit (-1);
- *	      }
- *	  _seqbufptr = 0;
- *	}
- */
-
-#define SEQ_DEFINEBUF(len)		unsigned char _seqbuf[len]; int _seqbuflen = len;int _seqbufptr = 0
-#define _SEQ_NEEDBUF(len)		if ((_seqbufptr+(len)) > _seqbuflen) seqbuf_dump()
-#define _SEQ_ADVBUF(len)		_seqbufptr += len
-#define SEQ_DUMPBUF			seqbuf_dump
-#else
-/*
- * This variation of the sequencer macros is used just to format one event
- * using fixed buffer.
- * 
- * The program using the macro library must define the following macros before
- * using this library.
- *
- * #define _seqbuf 		 name of the buffer (unsigned char[]) 
- * #define _SEQ_ADVBUF(len)	 If the applic needs to know the exact
- *				 size of the event, this macro can be used.
- *				 Otherwise this must be defined as empty.
- * #define _seqbufptr		 Define the name of index variable or 0 if
- *				 not required. 
- */
-#define _SEQ_NEEDBUF(len)	/* empty */
-#endif
-
-#define SEQ_VOLUME_MODE(dev, mode)	{_SEQ_NEEDBUF(8);\
-					_seqbuf[_seqbufptr] = SEQ_EXTENDED;\
-					_seqbuf[_seqbufptr+1] = SEQ_VOLMODE;\
-					_seqbuf[_seqbufptr+2] = (dev);\
-					_seqbuf[_seqbufptr+3] = (mode);\
-					_seqbuf[_seqbufptr+4] = 0;\
-					_seqbuf[_seqbufptr+5] = 0;\
-					_seqbuf[_seqbufptr+6] = 0;\
-					_seqbuf[_seqbufptr+7] = 0;\
-					_SEQ_ADVBUF(8);}
-
-/*
- * Midi voice messages
- */
-
-#define _CHN_VOICE(dev, event, chn, note, parm) \
-					{_SEQ_NEEDBUF(8);\
-					_seqbuf[_seqbufptr] = EV_CHN_VOICE;\
-					_seqbuf[_seqbufptr+1] = (dev);\
-					_seqbuf[_seqbufptr+2] = (event);\
-					_seqbuf[_seqbufptr+3] = (chn);\
-					_seqbuf[_seqbufptr+4] = (note);\
-					_seqbuf[_seqbufptr+5] = (parm);\
-					_seqbuf[_seqbufptr+6] = (0);\
-					_seqbuf[_seqbufptr+7] = 0;\
-					_SEQ_ADVBUF(8);}
-
-#define SEQ_START_NOTE(dev, chn, note, vol) \
-		_CHN_VOICE(dev, MIDI_NOTEON, chn, note, vol)
-
-#define SEQ_STOP_NOTE(dev, chn, note, vol) \
-		_CHN_VOICE(dev, MIDI_NOTEOFF, chn, note, vol)
-
-#define SEQ_KEY_PRESSURE(dev, chn, note, pressure) \
-		_CHN_VOICE(dev, MIDI_KEY_PRESSURE, chn, note, pressure)
-
-/*
- * Midi channel messages
- */
-
-#define _CHN_COMMON(dev, event, chn, p1, p2, w14) \
-					{_SEQ_NEEDBUF(8);\
-					_seqbuf[_seqbufptr] = EV_CHN_COMMON;\
-					_seqbuf[_seqbufptr+1] = (dev);\
-					_seqbuf[_seqbufptr+2] = (event);\
-					_seqbuf[_seqbufptr+3] = (chn);\
-					_seqbuf[_seqbufptr+4] = (p1);\
-					_seqbuf[_seqbufptr+5] = (p2);\
-					*(short *)&_seqbuf[_seqbufptr+6] = (w14);\
-					_SEQ_ADVBUF(8);}
-/*
- * SEQ_SYSEX permits sending of sysex messages. (It may look that it permits
- * sending any MIDI bytes but it's absolutely not possible. Trying to do
- * so _will_ cause problems with MPU401 intelligent mode).
- *
- * Sysex messages are sent in blocks of 1 to 6 bytes. Longer messages must be 
- * sent by calling SEQ_SYSEX() several times (there must be no other events
- * between them). First sysex fragment must have 0xf0 in the first byte
- * and the last byte (buf[len-1] of the last fragment must be 0xf7. No byte
- * between these sysex start and end markers cannot be larger than 0x7f. Also
- * lengths of each fragments (except the last one) must be 6.
- *
- * Breaking the above rules may work with some MIDI ports but is likely to
- * cause fatal problems with some other devices (such as MPU401).
- */
-#define SEQ_SYSEX(dev, buf, len) \
-					{int ii, ll=(len); \
-					 unsigned char *bufp=buf;\
-					 if (ll>6)ll=6;\
-					_SEQ_NEEDBUF(8);\
-					_seqbuf[_seqbufptr] = EV_SYSEX;\
-					_seqbuf[_seqbufptr+1] = (dev);\
-					for(ii=0;ii<ll;ii++)\
-					   _seqbuf[_seqbufptr+ii+2] = bufp[ii];\
-					for(ii=ll;ii<6;ii++)\
-					   _seqbuf[_seqbufptr+ii+2] = 0xff;\
-					_SEQ_ADVBUF(8);}
-
-#define SEQ_CHN_PRESSURE(dev, chn, pressure) \
-		_CHN_COMMON(dev, MIDI_CHN_PRESSURE, chn, pressure, 0, 0)
-
-#define SEQ_SET_PATCH SEQ_PGM_CHANGE
-#define SEQ_PGM_CHANGE(dev, chn, patch) \
-		_CHN_COMMON(dev, MIDI_PGM_CHANGE, chn, patch, 0, 0)
-
-#define SEQ_CONTROL(dev, chn, controller, value) \
-		_CHN_COMMON(dev, MIDI_CTL_CHANGE, chn, controller, 0, value)
-
-#define SEQ_BENDER(dev, chn, value) \
-		_CHN_COMMON(dev, MIDI_PITCH_BEND, chn, 0, 0, value)
-
-
-#define SEQ_V2_X_CONTROL(dev, voice, controller, value)	{_SEQ_NEEDBUF(8);\
-					_seqbuf[_seqbufptr] = SEQ_EXTENDED;\
-					_seqbuf[_seqbufptr+1] = SEQ_CONTROLLER;\
-					_seqbuf[_seqbufptr+2] = (dev);\
-					_seqbuf[_seqbufptr+3] = (voice);\
-					_seqbuf[_seqbufptr+4] = (controller);\
-					_seqbuf[_seqbufptr+5] = ((value)&0xff);\
-					_seqbuf[_seqbufptr+6] = ((value>>8)&0xff);\
-					_seqbuf[_seqbufptr+7] = 0;\
-					_SEQ_ADVBUF(8);}
-/*
- * The following 5 macros are incorrectly implemented and obsolete.
- * Use SEQ_BENDER and SEQ_CONTROL (with proper controller) instead.
- */
-#define SEQ_PITCHBEND(dev, voice, value) SEQ_V2_X_CONTROL(dev, voice, CTRL_PITCH_BENDER, value)
-#define SEQ_BENDER_RANGE(dev, voice, value) SEQ_V2_X_CONTROL(dev, voice, CTRL_PITCH_BENDER_RANGE, value)
-#define SEQ_EXPRESSION(dev, voice, value) SEQ_CONTROL(dev, voice, CTL_EXPRESSION, value*128)
-#define SEQ_MAIN_VOLUME(dev, voice, value) SEQ_CONTROL(dev, voice, CTL_MAIN_VOLUME, (value*16383)/100)
-#define SEQ_PANNING(dev, voice, pos) SEQ_CONTROL(dev, voice, CTL_PAN, (pos+128) / 2)
-
-/*
- * Timing and synchronization macros
- */
-
-#define _TIMER_EVENT(ev, parm)		{_SEQ_NEEDBUF(8);\
-				 	_seqbuf[_seqbufptr+0] = EV_TIMING; \
-				 	_seqbuf[_seqbufptr+1] = (ev); \
-					_seqbuf[_seqbufptr+2] = 0;\
-					_seqbuf[_seqbufptr+3] = 0;\
-				 	*(unsigned int *)&_seqbuf[_seqbufptr+4] = (parm); \
-					_SEQ_ADVBUF(8);}
-
-#define SEQ_START_TIMER()		_TIMER_EVENT(TMR_START, 0)
-#define SEQ_STOP_TIMER()		_TIMER_EVENT(TMR_STOP, 0)
-#define SEQ_CONTINUE_TIMER()		_TIMER_EVENT(TMR_CONTINUE, 0)
-#define SEQ_WAIT_TIME(ticks)		_TIMER_EVENT(TMR_WAIT_ABS, ticks)
-#define SEQ_DELTA_TIME(ticks)		_TIMER_EVENT(TMR_WAIT_REL, ticks)
-#define SEQ_ECHO_BACK(key)		_TIMER_EVENT(TMR_ECHO, key)
-#define SEQ_SET_TEMPO(value)		_TIMER_EVENT(TMR_TEMPO, value)
-#define SEQ_SONGPOS(pos)		_TIMER_EVENT(TMR_SPP, pos)
-#define SEQ_TIME_SIGNATURE(sig)		_TIMER_EVENT(TMR_TIMESIG, sig)
-
-/*
- * Local control events
- */
-
-#define _LOCAL_EVENT(ev, parm)		{_SEQ_NEEDBUF(8);\
-				 	_seqbuf[_seqbufptr+0] = EV_SEQ_LOCAL; \
-				 	_seqbuf[_seqbufptr+1] = (ev); \
-					_seqbuf[_seqbufptr+2] = 0;\
-					_seqbuf[_seqbufptr+3] = 0;\
-				 	*(unsigned int *)&_seqbuf[_seqbufptr+4] = (parm); \
-					_SEQ_ADVBUF(8);}
-
-#define SEQ_PLAYAUDIO(devmask)		_LOCAL_EVENT(LOCL_STARTAUDIO, devmask)
-/*
- * Events for the level 1 interface only 
- */
-
-#define SEQ_MIDIOUT(device, byte)	{_SEQ_NEEDBUF(4);\
-					_seqbuf[_seqbufptr] = SEQ_MIDIPUTC;\
-					_seqbuf[_seqbufptr+1] = (byte);\
-					_seqbuf[_seqbufptr+2] = (device);\
-					_seqbuf[_seqbufptr+3] = 0;\
-					_SEQ_ADVBUF(4);}
-
-/*
- * Patch loading.
- */
-#define SEQ_WRPATCH(patchx, len) \
-		{if (_seqbufptr) SEQ_DUMPBUF();\
-		 if (write(seqfd, (char*)(patchx), len)==-1) \
-		    perror("Write patch: /dev/sequencer");}
-#define SEQ_WRPATCH2(patchx, len) \
-		(SEQ_DUMPBUF(), write(seqfd, (char*)(patchx), len))
-
-#endif
-#endif
diff --git a/ANDROID_3.4.5/include/linux/spi/74x164.h b/ANDROID_3.4.5/include/linux/spi/74x164.h
deleted file mode 100644
index 0aa6acc7..00000000
--- a/ANDROID_3.4.5/include/linux/spi/74x164.h
+++ /dev/null
@@ -1,9 +0,0 @@
-#ifndef LINUX_SPI_74X164_H
-#define LINUX_SPI_74X164_H
-
-struct gen_74x164_chip_platform_data {
-	/* number assigned to the first GPIO */
-	unsigned	base;
-};
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/spi/Kbuild b/ANDROID_3.4.5/include/linux/spi/Kbuild
deleted file mode 100644
index d375a082..00000000
--- a/ANDROID_3.4.5/include/linux/spi/Kbuild
+++ /dev/null
@@ -1 +0,0 @@
-header-y += spidev.h
diff --git a/ANDROID_3.4.5/include/linux/spi/ad7877.h b/ANDROID_3.4.5/include/linux/spi/ad7877.h
deleted file mode 100644
index cdbed816..00000000
--- a/ANDROID_3.4.5/include/linux/spi/ad7877.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/* linux/spi/ad7877.h */
-
-/* Touchscreen characteristics vary between boards and models.  The
- * platform_data for the device's "struct device" holds this information.
- *
- * It's OK if the min/max values are zero.
- */
-struct ad7877_platform_data {
-	u16	model;			/* 7877 */
-	u16	vref_delay_usecs;	/* 0 for external vref; etc */
-	u16	x_plate_ohms;
-	u16	y_plate_ohms;
-
-	u16	x_min, x_max;
-	u16	y_min, y_max;
-	u16	pressure_min, pressure_max;
-
-	u8	stopacq_polarity;	/* 1 = Active HIGH, 0 = Active LOW */
-	u8	first_conversion_delay;	/* 0 = 0.5us, 1 = 128us, 2 = 1ms, 3 = 8ms */
-	u8	acquisition_time;	/* 0 = 2us, 1 = 4us, 2 = 8us, 3 = 16us */
-	u8	averaging;		/* 0 = 1, 1 = 4, 2 = 8, 3 = 16 */
-	u8	pen_down_acc_interval;	/* 0 = covert once, 1 = every 0.5 ms,
-					   2 = ever 1 ms,   3 = every 8 ms,*/
-};
diff --git a/ANDROID_3.4.5/include/linux/spi/ad7879.h b/ANDROID_3.4.5/include/linux/spi/ad7879.h
deleted file mode 100644
index 6334cee1..00000000
--- a/ANDROID_3.4.5/include/linux/spi/ad7879.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/* linux/spi/ad7879.h */
-
-/* Touchscreen characteristics vary between boards and models.  The
- * platform_data for the device's "struct device" holds this information.
- *
- * It's OK if the min/max values are zero.
- */
-struct ad7879_platform_data {
-	u16	model;			/* 7879 */
-	u16	x_plate_ohms;
-	u16	x_min, x_max;
-	u16	y_min, y_max;
-	u16	pressure_min, pressure_max;
-
-	/* [0..255] 0=OFF Starts at 1=550us and goes
-	 * all the way to 9.440ms in steps of 35us.
-	 */
-	u8	pen_down_acc_interval;
-	/* [0..15] Starts at 0=128us and goes all the
-	 * way to 4.096ms in steps of 128us.
-	 */
-	u8	first_conversion_delay;
-	/* [0..3] 0 = 2us, 1 = 4us, 2 = 8us, 3 = 16us */
-	u8	acquisition_time;
-	/* [0..3] Average X middle samples 0 = 2, 1 = 4, 2 = 8, 3 = 16 */
-	u8	averaging;
-	/* [0..3] Perform X measurements 0 = OFF,
-	 * 1 = 4, 2 = 8, 3 = 16 (median > averaging)
-	 */
-	u8	median;
-	/* 1 = AUX/VBAT/GPIO export GPIO to gpiolib
-	 * requires CONFIG_GPIOLIB
-	 */
-	bool	gpio_export;
-	/* identifies the first GPIO number handled by this chip;
-	 * or, if negative, requests dynamic ID allocation.
-	 */
-	s32	gpio_base;
-};
diff --git a/ANDROID_3.4.5/include/linux/spi/ads7846.h b/ANDROID_3.4.5/include/linux/spi/ads7846.h
deleted file mode 100644
index c64de9dd..00000000
--- a/ANDROID_3.4.5/include/linux/spi/ads7846.h
+++ /dev/null
@@ -1,60 +0,0 @@
-/* linux/spi/ads7846.h */
-
-/* Touchscreen characteristics vary between boards and models.  The
- * platform_data for the device's "struct device" holds this information.
- *
- * It's OK if the min/max values are zero.
- */
-enum ads7846_filter {
-	ADS7846_FILTER_OK,
-	ADS7846_FILTER_REPEAT,
-	ADS7846_FILTER_IGNORE,
-};
-
-struct ads7846_platform_data {
-	u16	model;			/* 7843, 7845, 7846, 7873. */
-	u16	vref_delay_usecs;	/* 0 for external vref; etc */
-	u16	vref_mv;		/* external vref value, milliVolts
-					 * ads7846: if 0, use internal vref */
-	bool	keep_vref_on;		/* set to keep vref on for differential
-					 * measurements as well */
-	bool	swap_xy;		/* swap x and y axes */
-
-	/* Settling time of the analog signals; a function of Vcc and the
-	 * capacitance on the X/Y drivers.  If set to non-zero, two samples
-	 * are taken with settle_delay us apart, and the second one is used.
-	 * ~150 uSec with 0.01uF caps.
-	 */
-	u16	settle_delay_usecs;
-
-	/* If set to non-zero, after samples are taken this delay is applied
-	 * and penirq is rechecked, to help avoid false events.  This value
-	 * is affected by the material used to build the touch layer.
-	 */
-	u16	penirq_recheck_delay_usecs;
-
-	u16	x_plate_ohms;
-	u16	y_plate_ohms;
-
-	u16	x_min, x_max;
-	u16	y_min, y_max;
-	u16	pressure_min, pressure_max;
-
-	u16	debounce_max;		/* max number of additional readings
-					 * per sample */
-	u16	debounce_tol;		/* tolerance used for filtering */
-	u16	debounce_rep;		/* additional consecutive good readings
-					 * required after the first two */
-	int	gpio_pendown;		/* the GPIO used to decide the pendown
-					 * state if get_pendown_state == NULL
-					 */
-	int	(*get_pendown_state)(void);
-	int	(*filter_init)	(const struct ads7846_platform_data *pdata,
-				 void **filter_data);
-	int	(*filter)	(void *filter_data, int data_idx, int *val);
-	void	(*filter_cleanup)(void *filter_data);
-	void	(*wait_for_sync)(void);
-	bool	wakeup;
-	unsigned long irq_flags;
-};
-
diff --git a/ANDROID_3.4.5/include/linux/spi/at73c213.h b/ANDROID_3.4.5/include/linux/spi/at73c213.h
deleted file mode 100644
index 0f20a70e..00000000
--- a/ANDROID_3.4.5/include/linux/spi/at73c213.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * Board-specific data used to set up AT73c213 audio DAC driver.
- */
-
-#ifndef __LINUX_SPI_AT73C213_H
-#define __LINUX_SPI_AT73C213_H
-
-/**
- * at73c213_board_info - how the external DAC is wired to the device.
- *
- * @ssc_id: SSC platform_driver id the DAC shall use to stream the audio.
- * @dac_clk: the external clock used to provide master clock to the DAC.
- * @shortname: a short discription for the DAC, seen by userspace tools.
- *
- * This struct contains the configuration of the hardware connection to the
- * external DAC. The DAC needs a master clock and a I2S audio stream. It also
- * provides a name which is used to identify it in userspace tools.
- */
-struct at73c213_board_info {
-	int		ssc_id;
-	struct clk	*dac_clk;
-	char		shortname[32];
-};
-
-#endif /* __LINUX_SPI_AT73C213_H */
diff --git a/ANDROID_3.4.5/include/linux/spi/corgi_lcd.h b/ANDROID_3.4.5/include/linux/spi/corgi_lcd.h
deleted file mode 100644
index 6692b341..00000000
--- a/ANDROID_3.4.5/include/linux/spi/corgi_lcd.h
+++ /dev/null
@@ -1,20 +0,0 @@
-#ifndef __LINUX_SPI_CORGI_LCD_H
-#define __LINUX_SPI_CORGI_LCD_H
-
-#define CORGI_LCD_MODE_QVGA	1
-#define CORGI_LCD_MODE_VGA	2
-
-struct corgi_lcd_platform_data {
-	int	init_mode;
-	int	max_intensity;
-	int	default_intensity;
-	int	limit_mask;
-
-	int	gpio_backlight_on;	/* -1 if n/a */
-	int	gpio_backlight_cont;	/* -1 if n/a */
-
-	void (*notify)(int intensity);
-	void (*kick_battery)(void);
-};
-
-#endif /* __LINUX_SPI_CORGI_LCD_H */
diff --git a/ANDROID_3.4.5/include/linux/spi/ds1305.h b/ANDROID_3.4.5/include/linux/spi/ds1305.h
deleted file mode 100644
index 287ec830..00000000
--- a/ANDROID_3.4.5/include/linux/spi/ds1305.h
+++ /dev/null
@@ -1,35 +0,0 @@
-#ifndef __LINUX_SPI_DS1305_H
-#define __LINUX_SPI_DS1305_H
-
-/*
- * One-time configuration for ds1305 and ds1306 RTC chips.
- *
- * Put a pointer to this in spi_board_info.platform_data if you want to
- * be sure that Linux (re)initializes this as needed ... after losing
- * backup power, and potentially on the first boot.
- */
-struct ds1305_platform_data {
-
-	/* Trickle charge configuration:  it's OK to leave out the MAGIC
-	 * bitmask; mask in either DS1 or DS2, and then one of 2K/4k/8K.
-	 */
-#define DS1305_TRICKLE_MAGIC	0xa0
-#define DS1305_TRICKLE_DS2	0x08	/* two diodes */
-#define DS1305_TRICKLE_DS1	0x04	/* one diode */
-#define DS1305_TRICKLE_2K	0x01	/* 2 KOhm resistance */
-#define DS1305_TRICKLE_4K	0x02	/* 4 KOhm resistance */
-#define DS1305_TRICKLE_8K	0x03	/* 8 KOhm resistance */
-	u8	trickle;
-
-	/* set only on ds1306 parts */
-	bool	is_ds1306;
-
-	/* ds1306 only:  enable 1 Hz output */
-	bool	en_1hz;
-
-	/* REVISIT:  the driver currently expects nINT0 to be wired
-	 * as the alarm IRQ.  ALM1 may also need to be set up ...
-	 */
-};
-
-#endif /* __LINUX_SPI_DS1305_H */
diff --git a/ANDROID_3.4.5/include/linux/spi/eeprom.h b/ANDROID_3.4.5/include/linux/spi/eeprom.h
deleted file mode 100644
index 306e7b1c..00000000
--- a/ANDROID_3.4.5/include/linux/spi/eeprom.h
+++ /dev/null
@@ -1,28 +0,0 @@
-#ifndef __LINUX_SPI_EEPROM_H
-#define __LINUX_SPI_EEPROM_H
-
-#include <linux/memory.h>
-
-/*
- * Put one of these structures in platform_data for SPI EEPROMS handled
- * by the "at25" driver.  On SPI, most EEPROMS understand the same core
- * command set.  If you need to support EEPROMs that don't yet fit, add
- * flags to support those protocol options.  These values all come from
- * the chip datasheets.
- */
-struct spi_eeprom {
-	u32		byte_len;
-	char		name[10];
-	u16		page_size;		/* for writes */
-	u16		flags;
-#define	EE_ADDR1	0x0001			/*  8 bit addrs */
-#define	EE_ADDR2	0x0002			/* 16 bit addrs */
-#define	EE_ADDR3	0x0004			/* 24 bit addrs */
-#define	EE_READONLY	0x0008			/* disallow writes */
-
-	/* for exporting this chip's data to other kernel code */
-	void (*setup)(struct memory_accessor *mem, void *context);
-	void *context;
-};
-
-#endif /* __LINUX_SPI_EEPROM_H */
diff --git a/ANDROID_3.4.5/include/linux/spi/flash.h b/ANDROID_3.4.5/include/linux/spi/flash.h
deleted file mode 100644
index 3f22932e..00000000
--- a/ANDROID_3.4.5/include/linux/spi/flash.h
+++ /dev/null
@@ -1,31 +0,0 @@
-#ifndef LINUX_SPI_FLASH_H
-#define LINUX_SPI_FLASH_H
-
-struct mtd_partition;
-
-/**
- * struct flash_platform_data: board-specific flash data
- * @name: optional flash device name (eg, as used with mtdparts=)
- * @parts: optional array of mtd_partitions for static partitioning
- * @nr_parts: number of mtd_partitions for static partitoning
- * @type: optional flash device type (e.g. m25p80 vs m25p64), for use
- *	with chips that can't be queried for JEDEC or other IDs
- *
- * Board init code (in arch/.../mach-xxx/board-yyy.c files) can
- * provide information about SPI flash parts (such as DataFlash) to
- * help set up the device and its appropriate default partitioning.
- *
- * Note that for DataFlash, sizes for pages, blocks, and sectors are
- * rarely powers of two; and partitions should be sector-aligned.
- */
-struct flash_platform_data {
-	char		*name;
-	struct mtd_partition *parts;
-	unsigned int	nr_parts;
-
-	char		*type;
-
-	/* we'll likely add more ... use JEDEC IDs, etc */
-};
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/spi/ifx_modem.h b/ANDROID_3.4.5/include/linux/spi/ifx_modem.h
deleted file mode 100644
index 394fec9e..00000000
--- a/ANDROID_3.4.5/include/linux/spi/ifx_modem.h
+++ /dev/null
@@ -1,19 +0,0 @@
-#ifndef LINUX_IFX_MODEM_H
-#define LINUX_IFX_MODEM_H
-
-struct ifx_modem_platform_data {
-	unsigned short rst_out;		/* modem reset out */
-	unsigned short pwr_on;		/* power on */
-	unsigned short rst_pmu;		/* reset modem */
-	unsigned short tx_pwr;		/* modem power threshold */
-	unsigned short srdy;		/* SRDY */
-	unsigned short mrdy;		/* MRDY */
-	unsigned char modem_type;	/* Modem type */
-	unsigned long max_hz;		/* max SPI frequency */
-	unsigned short use_dma:1;	/* spi protocol driver supplies
-					   dma-able addrs */
-};
-#define IFX_MODEM_6160	1
-#define IFX_MODEM_6260	2
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/spi/l4f00242t03.h b/ANDROID_3.4.5/include/linux/spi/l4f00242t03.h
deleted file mode 100644
index bc8677c8..00000000
--- a/ANDROID_3.4.5/include/linux/spi/l4f00242t03.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * l4f00242t03.h -- Platform glue for Epson L4F00242T03 LCD
- *
- * Copyright (c) 2009 Alberto Panizzo <maramaopercheseimorto@gmail.com>
- * Based on Marek Vasut work in lms283gf05.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-*/
-
-#ifndef _INCLUDE_LINUX_SPI_L4F00242T03_H_
-#define _INCLUDE_LINUX_SPI_L4F00242T03_H_
-
-struct l4f00242t03_pdata {
-	unsigned int	reset_gpio;
-	unsigned int	data_enable_gpio;
-};
-
-#endif /* _INCLUDE_LINUX_SPI_L4F00242T03_H_ */
diff --git a/ANDROID_3.4.5/include/linux/spi/libertas_spi.h b/ANDROID_3.4.5/include/linux/spi/libertas_spi.h
deleted file mode 100644
index 1b5d5384..00000000
--- a/ANDROID_3.4.5/include/linux/spi/libertas_spi.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * board-specific data for the libertas_spi driver.
- *
- * Copyright 2008 Analog Devices Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or (at
- * your option) any later version.
- */
-#ifndef _LIBERTAS_SPI_H_
-#define _LIBERTAS_SPI_H_
-
-struct spi_device;
-
-struct libertas_spi_platform_data {
-	/* There are two ways to read data from the WLAN module's SPI
-	 * interface. Setting 0 or 1 here controls which one is used.
-	 *
-	 * Usually you want to set use_dummy_writes = 1.
-	 * However, if that doesn't work or if you are using a slow SPI clock
-	 * speed, you may want to use 0 here. */
-	u16 use_dummy_writes;
-
-	/* Board specific setup/teardown */
-	int (*setup)(struct spi_device *spi);
-	int (*teardown)(struct spi_device *spi);
-};
-#endif
diff --git a/ANDROID_3.4.5/include/linux/spi/lms283gf05.h b/ANDROID_3.4.5/include/linux/spi/lms283gf05.h
deleted file mode 100644
index 555d254e..00000000
--- a/ANDROID_3.4.5/include/linux/spi/lms283gf05.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * lms283gf05.h - Platform glue for Samsung LMS283GF05 LCD
- *
- * Copyright (C) 2009 Marek Vasut <marek.vasut@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-*/
-
-#ifndef _INCLUDE_LINUX_SPI_LMS283GF05_H_
-#define _INCLUDE_LINUX_SPI_LMS283GF05_H_
-
-struct lms283gf05_pdata {
-	unsigned long	reset_gpio;
-	bool		reset_inverted;
-};
-
-#endif /* _INCLUDE_LINUX_SPI_LMS283GF05_H_ */
diff --git a/ANDROID_3.4.5/include/linux/spi/max7301.h b/ANDROID_3.4.5/include/linux/spi/max7301.h
deleted file mode 100644
index bcaa2f76..00000000
--- a/ANDROID_3.4.5/include/linux/spi/max7301.h
+++ /dev/null
@@ -1,35 +0,0 @@
-#ifndef LINUX_SPI_MAX7301_H
-#define LINUX_SPI_MAX7301_H
-
-#include <linux/gpio.h>
-
-/*
- * Some registers must be read back to modify.
- * To save time we cache them here in memory
- */
-struct max7301 {
-	struct mutex	lock;
-	u8		port_config[8];	/* field 0 is unused */
-	u32		out_level;	/* cached output levels */
-	u32		input_pullup_active;
-	struct gpio_chip chip;
-	struct device *dev;
-	int (*write)(struct device *dev, unsigned int reg, unsigned int val);
-	int (*read)(struct device *dev, unsigned int reg);
-};
-
-struct max7301_platform_data {
-	/* number assigned to the first GPIO */
-	unsigned	base;
-	/*
-	 * bitmask controlling the pullup configuration,
-	 *
-	 * _note_ the 4 lowest bits are unused, because the first 4
-	 * ports of the controller are not used, too.
-	 */
-	u32		input_pullup_active;
-};
-
-extern int __max730x_remove(struct device *dev);
-extern int __max730x_probe(struct max7301 *ts);
-#endif
diff --git a/ANDROID_3.4.5/include/linux/spi/mc33880.h b/ANDROID_3.4.5/include/linux/spi/mc33880.h
deleted file mode 100644
index 82ffccd6..00000000
--- a/ANDROID_3.4.5/include/linux/spi/mc33880.h
+++ /dev/null
@@ -1,10 +0,0 @@
-#ifndef LINUX_SPI_MC33880_H
-#define LINUX_SPI_MC33880_H
-
-struct mc33880_platform_data {
-	/* number assigned to the first GPIO */
-	unsigned	base;
-};
-
-#endif
-
diff --git a/ANDROID_3.4.5/include/linux/spi/mcp23s08.h b/ANDROID_3.4.5/include/linux/spi/mcp23s08.h
deleted file mode 100644
index 2d676d5a..00000000
--- a/ANDROID_3.4.5/include/linux/spi/mcp23s08.h
+++ /dev/null
@@ -1,25 +0,0 @@
-
-/* FIXME driver should be able to handle IRQs...  */
-
-struct mcp23s08_chip_info {
-	bool		is_present;	/* true if populated */
-	unsigned	pullups;	/* BIT(x) means enable pullup x */
-};
-
-struct mcp23s08_platform_data {
-	/* For mcp23s08, up to 4 slaves (numbered 0..3) can share one SPI
-	 * chipselect, each providing 1 gpio_chip instance with 8 gpios.
-	 * For mpc23s17, up to 8 slaves (numbered 0..7) can share one SPI
-	 * chipselect, each providing 1 gpio_chip (port A + port B) with
-	 * 16 gpios.
-	 */
-	struct mcp23s08_chip_info	chip[8];
-
-	/* "base" is the number of the first GPIO.  Dynamic assignment is
-	 * not currently supported, and even if there are gaps in chip
-	 * addressing the GPIO numbers are sequential .. so for example
-	 * if only slaves 0 and 3 are present, their GPIOs range from
-	 * base to base+15 (or base+31 for s17 variant).
-	 */
-	unsigned	base;
-};
diff --git a/ANDROID_3.4.5/include/linux/spi/mmc_spi.h b/ANDROID_3.4.5/include/linux/spi/mmc_spi.h
deleted file mode 100644
index 32be8dbd..00000000
--- a/ANDROID_3.4.5/include/linux/spi/mmc_spi.h
+++ /dev/null
@@ -1,57 +0,0 @@
-#ifndef __LINUX_SPI_MMC_SPI_H
-#define __LINUX_SPI_MMC_SPI_H
-
-#include <linux/spi/spi.h>
-#include <linux/interrupt.h>
-
-struct device;
-struct mmc_host;
-
-/* Put this in platform_data of a device being used to manage an MMC/SD
- * card slot.  (Modeled after PXA mmc glue; see that for usage examples.)
- *
- * REVISIT This is not a spi-specific notion.  Any card slot should be
- * able to handle it.  If the MMC core doesn't adopt this kind of notion,
- * switch the "struct device *" parameters over to "struct spi_device *".
- */
-struct mmc_spi_platform_data {
-	/* driver activation and (optional) card detect irq hookup */
-	int (*init)(struct device *,
-		irqreturn_t (*)(int, void *),
-		void *);
-	void (*exit)(struct device *, void *);
-
-	/* sense switch on sd cards */
-	int (*get_ro)(struct device *);
-
-	/*
-	 * If board does not use CD interrupts, driver can optimize polling
-	 * using this function.
-	 */
-	int (*get_cd)(struct device *);
-
-	/* Capabilities to pass into mmc core (e.g. MMC_CAP_NEEDS_POLL). */
-	unsigned long caps;
-
-	/* how long to debounce card detect, in msecs */
-	u16 detect_delay;
-
-	/* power management */
-	u16 powerup_msecs;		/* delay of up to 250 msec */
-	u32 ocr_mask;			/* available voltages */
-	void (*setpower)(struct device *, unsigned int maskval);
-};
-
-#ifdef CONFIG_OF
-extern struct mmc_spi_platform_data *mmc_spi_get_pdata(struct spi_device *spi);
-extern void mmc_spi_put_pdata(struct spi_device *spi);
-#else
-static inline struct mmc_spi_platform_data *
-mmc_spi_get_pdata(struct spi_device *spi)
-{
-	return spi->dev.platform_data;
-}
-static inline void mmc_spi_put_pdata(struct spi_device *spi) {}
-#endif /* CONFIG_OF */
-
-#endif /* __LINUX_SPI_MMC_SPI_H */
diff --git a/ANDROID_3.4.5/include/linux/spi/orion_spi.h b/ANDROID_3.4.5/include/linux/spi/orion_spi.h
deleted file mode 100644
index b4d9fa6f..00000000
--- a/ANDROID_3.4.5/include/linux/spi/orion_spi.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * orion_spi.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __LINUX_SPI_ORION_SPI_H
-#define __LINUX_SPI_ORION_SPI_H
-
-struct orion_spi_info {
-	u32	tclk;		/* no <linux/clk.h> support yet */
-};
-
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/spi/pxa2xx_spi.h b/ANDROID_3.4.5/include/linux/spi/pxa2xx_spi.h
deleted file mode 100644
index d3e1075f..00000000
--- a/ANDROID_3.4.5/include/linux/spi/pxa2xx_spi.h
+++ /dev/null
@@ -1,152 +0,0 @@
-/*
- * Copyright (C) 2005 Stephen Street / StreetFire Sound Labs
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-#ifndef __linux_pxa2xx_spi_h
-#define __linux_pxa2xx_spi_h
-
-#include <linux/pxa2xx_ssp.h>
-
-#define PXA2XX_CS_ASSERT (0x01)
-#define PXA2XX_CS_DEASSERT (0x02)
-
-/* device.platform_data for SSP controller devices */
-struct pxa2xx_spi_master {
-	u32 clock_enable;
-	u16 num_chipselect;
-	u8 enable_dma;
-};
-
-/* spi_board_info.controller_data for SPI slave devices,
- * copied to spi_device.platform_data ... mostly for dma tuning
- */
-struct pxa2xx_spi_chip {
-	u8 tx_threshold;
-	u8 rx_threshold;
-	u8 dma_burst_size;
-	u32 timeout;
-	u8 enable_loopback;
-	int gpio_cs;
-	void (*cs_control)(u32 command);
-};
-
-#ifdef CONFIG_ARCH_PXA
-
-#include <linux/clk.h>
-#include <mach/dma.h>
-
-extern void pxa2xx_set_spi_info(unsigned id, struct pxa2xx_spi_master *info);
-
-#else
-/*
- * This is the implemtation for CE4100 on x86. ARM defines them in mach/ or
- * plat/ include path.
- * The CE4100 does not provide DMA support. This bits are here to let the driver
- * compile and will never be used. Maybe we get DMA support at a later point in
- * time.
- */
-
-#define DCSR(n)         (n)
-#define DSADR(n)        (n)
-#define DTADR(n)        (n)
-#define DCMD(n)         (n)
-#define DRCMR(n)        (n)
-
-#define DCSR_RUN	(1 << 31)	/* Run Bit */
-#define DCSR_NODESC	(1 << 30)	/* No-Descriptor Fetch */
-#define DCSR_STOPIRQEN	(1 << 29)	/* Stop Interrupt Enable */
-#define DCSR_REQPEND	(1 << 8)	/* Request Pending (read-only) */
-#define DCSR_STOPSTATE	(1 << 3)	/* Stop State (read-only) */
-#define DCSR_ENDINTR	(1 << 2)	/* End Interrupt */
-#define DCSR_STARTINTR	(1 << 1)	/* Start Interrupt */
-#define DCSR_BUSERR	(1 << 0)	/* Bus Error Interrupt */
-
-#define DCSR_EORIRQEN	(1 << 28)	/* End of Receive Interrupt Enable */
-#define DCSR_EORJMPEN	(1 << 27)	/* Jump to next descriptor on EOR */
-#define DCSR_EORSTOPEN	(1 << 26)	/* STOP on an EOR */
-#define DCSR_SETCMPST	(1 << 25)	/* Set Descriptor Compare Status */
-#define DCSR_CLRCMPST	(1 << 24)	/* Clear Descriptor Compare Status */
-#define DCSR_CMPST	(1 << 10)	/* The Descriptor Compare Status */
-#define DCSR_EORINTR	(1 << 9)	/* The end of Receive */
-
-#define DRCMR_MAPVLD	(1 << 7)	/* Map Valid */
-#define DRCMR_CHLNUM	0x1f		/* mask for Channel Number */
-
-#define DDADR_DESCADDR	0xfffffff0	/* Address of next descriptor */
-#define DDADR_STOP	(1 << 0)	/* Stop */
-
-#define DCMD_INCSRCADDR	(1 << 31)	/* Source Address Increment Setting. */
-#define DCMD_INCTRGADDR	(1 << 30)	/* Target Address Increment Setting. */
-#define DCMD_FLOWSRC	(1 << 29)	/* Flow Control by the source. */
-#define DCMD_FLOWTRG	(1 << 28)	/* Flow Control by the target. */
-#define DCMD_STARTIRQEN	(1 << 22)	/* Start Interrupt Enable */
-#define DCMD_ENDIRQEN	(1 << 21)	/* End Interrupt Enable */
-#define DCMD_ENDIAN	(1 << 18)	/* Device Endian-ness. */
-#define DCMD_BURST8	(1 << 16)	/* 8 byte burst */
-#define DCMD_BURST16	(2 << 16)	/* 16 byte burst */
-#define DCMD_BURST32	(3 << 16)	/* 32 byte burst */
-#define DCMD_WIDTH1	(1 << 14)	/* 1 byte width */
-#define DCMD_WIDTH2	(2 << 14)	/* 2 byte width (HalfWord) */
-#define DCMD_WIDTH4	(3 << 14)	/* 4 byte width (Word) */
-#define DCMD_LENGTH	0x01fff		/* length mask (max = 8K - 1) */
-
-/*
- * Descriptor structure for PXA's DMA engine
- * Note: this structure must always be aligned to a 16-byte boundary.
- */
-
-typedef enum {
-	DMA_PRIO_HIGH = 0,
-	DMA_PRIO_MEDIUM = 1,
-	DMA_PRIO_LOW = 2
-} pxa_dma_prio;
-
-/*
- * DMA registration
- */
-
-static inline int pxa_request_dma(char *name,
-		pxa_dma_prio prio,
-		void (*irq_handler)(int, void *),
-		void *data)
-{
-	return -ENODEV;
-}
-
-static inline void pxa_free_dma(int dma_ch)
-{
-}
-
-/*
- * The CE4100 does not have the clk framework implemented and SPI clock can
- * not be switched on/off or the divider changed.
- */
-static inline void clk_disable(struct clk *clk)
-{
-}
-
-static inline int clk_enable(struct clk *clk)
-{
-	return 0;
-}
-
-static inline unsigned long clk_get_rate(struct clk *clk)
-{
-	return 3686400;
-}
-
-#endif
-#endif
diff --git a/ANDROID_3.4.5/include/linux/spi/s3c24xx.h b/ANDROID_3.4.5/include/linux/spi/s3c24xx.h
deleted file mode 100644
index c23b923e..00000000
--- a/ANDROID_3.4.5/include/linux/spi/s3c24xx.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * Copyright (c) 2006 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 - SPI Controller platform_device info
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __LINUX_SPI_S3C24XX_H
-#define __LINUX_SPI_S3C24XX_H __FILE__
-
-struct s3c2410_spi_info {
-	int			 pin_cs;	/* simple gpio cs */
-	unsigned int		 num_cs;	/* total chipselects */
-	int			 bus_num;       /* bus number to use. */
-
-	unsigned int		 use_fiq:1;	/* use fiq */
-
-	void (*gpio_setup)(struct s3c2410_spi_info *spi, int enable);
-	void (*set_cs)(struct s3c2410_spi_info *spi, int cs, int pol);
-};
-
-#endif /* __LINUX_SPI_S3C24XX_H */
diff --git a/ANDROID_3.4.5/include/linux/spi/sh_hspi.h b/ANDROID_3.4.5/include/linux/spi/sh_hspi.h
deleted file mode 100644
index a1121f87..00000000
--- a/ANDROID_3.4.5/include/linux/spi/sh_hspi.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * Copyright (C) 2011 Kuninori Morimoto
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-#ifndef SH_HSPI_H
-#define SH_HSPI_H
-
-struct sh_hspi_info {
-};
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/spi/sh_msiof.h b/ANDROID_3.4.5/include/linux/spi/sh_msiof.h
deleted file mode 100644
index 2e8db3d2..00000000
--- a/ANDROID_3.4.5/include/linux/spi/sh_msiof.h
+++ /dev/null
@@ -1,10 +0,0 @@
-#ifndef __SPI_SH_MSIOF_H__
-#define __SPI_SH_MSIOF_H__
-
-struct sh_msiof_spi_info {
-	int tx_fifo_override;
-	int rx_fifo_override;
-	u16 num_chipselect;
-};
-
-#endif /* __SPI_SH_MSIOF_H__ */
diff --git a/ANDROID_3.4.5/include/linux/spi/spi.h b/ANDROID_3.4.5/include/linux/spi/spi.h
deleted file mode 100644
index fa702aeb..00000000
--- a/ANDROID_3.4.5/include/linux/spi/spi.h
+++ /dev/null
@@ -1,859 +0,0 @@
-/*
- * Copyright (C) 2005 David Brownell
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __LINUX_SPI_H
-#define __LINUX_SPI_H
-
-#include <linux/device.h>
-#include <linux/mod_devicetable.h>
-#include <linux/slab.h>
-#include <linux/kthread.h>
-
-/*
- * INTERFACES between SPI master-side drivers and SPI infrastructure.
- * (There's no SPI slave support for Linux yet...)
- */
-extern struct bus_type spi_bus_type;
-
-/**
- * struct spi_device - Master side proxy for an SPI slave device
- * @dev: Driver model representation of the device.
- * @master: SPI controller used with the device.
- * @max_speed_hz: Maximum clock rate to be used with this chip
- *	(on this board); may be changed by the device's driver.
- *	The spi_transfer.speed_hz can override this for each transfer.
- * @chip_select: Chipselect, distinguishing chips handled by @master.
- * @mode: The spi mode defines how data is clocked out and in.
- *	This may be changed by the device's driver.
- *	The "active low" default for chipselect mode can be overridden
- *	(by specifying SPI_CS_HIGH) as can the "MSB first" default for
- *	each word in a transfer (by specifying SPI_LSB_FIRST).
- * @bits_per_word: Data transfers involve one or more words; word sizes
- *	like eight or 12 bits are common.  In-memory wordsizes are
- *	powers of two bytes (e.g. 20 bit samples use 32 bits).
- *	This may be changed by the device's driver, or left at the
- *	default (0) indicating protocol words are eight bit bytes.
- *	The spi_transfer.bits_per_word can override this for each transfer.
- * @irq: Negative, or the number passed to request_irq() to receive
- *	interrupts from this device.
- * @controller_state: Controller's runtime state
- * @controller_data: Board-specific definitions for controller, such as
- *	FIFO initialization parameters; from board_info.controller_data
- * @modalias: Name of the driver to use with this device, or an alias
- *	for that name.  This appears in the sysfs "modalias" attribute
- *	for driver coldplugging, and in uevents used for hotplugging
- *
- * A @spi_device is used to interchange data between an SPI slave
- * (usually a discrete chip) and CPU memory.
- *
- * In @dev, the platform_data is used to hold information about this
- * device that's meaningful to the device's protocol driver, but not
- * to its controller.  One example might be an identifier for a chip
- * variant with slightly different functionality; another might be
- * information about how this particular board wires the chip's pins.
- */
-struct spi_device {
-	struct device		dev;
-	struct spi_master	*master;
-	u32			max_speed_hz;
-	u8			chip_select;
-	u8			mode;
-#define	SPI_CPHA	0x01			/* clock phase */
-#define	SPI_CPOL	0x02			/* clock polarity */
-#define	SPI_MODE_0	(0|0)			/* (original MicroWire) */
-#define	SPI_MODE_1	(0|SPI_CPHA)
-#define	SPI_MODE_2	(SPI_CPOL|0)
-#define	SPI_MODE_3	(SPI_CPOL|SPI_CPHA)
-#define	SPI_CS_HIGH	0x04			/* chipselect active high? */
-#define	SPI_LSB_FIRST	0x08			/* per-word bits-on-wire */
-#define	SPI_3WIRE	0x10			/* SI/SO signals shared */
-#define	SPI_LOOP	0x20			/* loopback mode */
-#define	SPI_NO_CS	0x40			/* 1 dev/bus, no chipselect */
-#define	SPI_READY	0x80			/* slave pulls low to pause */
-	u8			bits_per_word;
-	int			irq;
-	void			*controller_state;
-	void			*controller_data;
-	char			modalias[SPI_NAME_SIZE];
-
-	/*
-	 * likely need more hooks for more protocol options affecting how
-	 * the controller talks to each chip, like:
-	 *  - memory packing (12 bit samples into low bits, others zeroed)
-	 *  - priority
-	 *  - drop chipselect after each word
-	 *  - chipselect delays
-	 *  - ...
-	 */
-};
-
-static inline struct spi_device *to_spi_device(struct device *dev)
-{
-	return dev ? container_of(dev, struct spi_device, dev) : NULL;
-}
-
-/* most drivers won't need to care about device refcounting */
-static inline struct spi_device *spi_dev_get(struct spi_device *spi)
-{
-	return (spi && get_device(&spi->dev)) ? spi : NULL;
-}
-
-static inline void spi_dev_put(struct spi_device *spi)
-{
-	if (spi)
-		put_device(&spi->dev);
-}
-
-/* ctldata is for the bus_master driver's runtime state */
-static inline void *spi_get_ctldata(struct spi_device *spi)
-{
-	return spi->controller_state;
-}
-
-static inline void spi_set_ctldata(struct spi_device *spi, void *state)
-{
-	spi->controller_state = state;
-}
-
-/* device driver data */
-
-static inline void spi_set_drvdata(struct spi_device *spi, void *data)
-{
-	dev_set_drvdata(&spi->dev, data);
-}
-
-static inline void *spi_get_drvdata(struct spi_device *spi)
-{
-	return dev_get_drvdata(&spi->dev);
-}
-
-struct spi_message;
-
-
-
-/**
- * struct spi_driver - Host side "protocol" driver
- * @id_table: List of SPI devices supported by this driver
- * @probe: Binds this driver to the spi device.  Drivers can verify
- *	that the device is actually present, and may need to configure
- *	characteristics (such as bits_per_word) which weren't needed for
- *	the initial configuration done during system setup.
- * @remove: Unbinds this driver from the spi device
- * @shutdown: Standard shutdown callback used during system state
- *	transitions such as powerdown/halt and kexec
- * @suspend: Standard suspend callback used during system state transitions
- * @resume: Standard resume callback used during system state transitions
- * @driver: SPI device drivers should initialize the name and owner
- *	field of this structure.
- *
- * This represents the kind of device driver that uses SPI messages to
- * interact with the hardware at the other end of a SPI link.  It's called
- * a "protocol" driver because it works through messages rather than talking
- * directly to SPI hardware (which is what the underlying SPI controller
- * driver does to pass those messages).  These protocols are defined in the
- * specification for the device(s) supported by the driver.
- *
- * As a rule, those device protocols represent the lowest level interface
- * supported by a driver, and it will support upper level interfaces too.
- * Examples of such upper levels include frameworks like MTD, networking,
- * MMC, RTC, filesystem character device nodes, and hardware monitoring.
- */
-struct spi_driver {
-	const struct spi_device_id *id_table;
-	int			(*probe)(struct spi_device *spi);
-	int			(*remove)(struct spi_device *spi);
-	void			(*shutdown)(struct spi_device *spi);
-	int			(*suspend)(struct spi_device *spi, pm_message_t mesg);
-	int			(*resume)(struct spi_device *spi);
-	struct device_driver	driver;
-};
-
-static inline struct spi_driver *to_spi_driver(struct device_driver *drv)
-{
-	return drv ? container_of(drv, struct spi_driver, driver) : NULL;
-}
-
-extern int spi_register_driver(struct spi_driver *sdrv);
-
-/**
- * spi_unregister_driver - reverse effect of spi_register_driver
- * @sdrv: the driver to unregister
- * Context: can sleep
- */
-static inline void spi_unregister_driver(struct spi_driver *sdrv)
-{
-	if (sdrv)
-		driver_unregister(&sdrv->driver);
-}
-
-/**
- * module_spi_driver() - Helper macro for registering a SPI driver
- * @__spi_driver: spi_driver struct
- *
- * Helper macro for SPI drivers which do not do anything special in module
- * init/exit. This eliminates a lot of boilerplate. Each module may only
- * use this macro once, and calling it replaces module_init() and module_exit()
- */
-#define module_spi_driver(__spi_driver) \
-	module_driver(__spi_driver, spi_register_driver, \
-			spi_unregister_driver)
-
-/**
- * struct spi_master - interface to SPI master controller
- * @dev: device interface to this driver
- * @list: link with the global spi_master list
- * @bus_num: board-specific (and often SOC-specific) identifier for a
- *	given SPI controller.
- * @num_chipselect: chipselects are used to distinguish individual
- *	SPI slaves, and are numbered from zero to num_chipselects.
- *	each slave has a chipselect signal, but it's common that not
- *	every chipselect is connected to a slave.
- * @dma_alignment: SPI controller constraint on DMA buffers alignment.
- * @mode_bits: flags understood by this controller driver
- * @flags: other constraints relevant to this driver
- * @bus_lock_spinlock: spinlock for SPI bus locking
- * @bus_lock_mutex: mutex for SPI bus locking
- * @bus_lock_flag: indicates that the SPI bus is locked for exclusive use
- * @setup: updates the device mode and clocking records used by a
- *	device's SPI controller; protocol code may call this.  This
- *	must fail if an unrecognized or unsupported mode is requested.
- *	It's always safe to call this unless transfers are pending on
- *	the device whose settings are being modified.
- * @transfer: adds a message to the controller's transfer queue.
- * @cleanup: frees controller-specific state
- * @queued: whether this master is providing an internal message queue
- * @kworker: thread struct for message pump
- * @kworker_task: pointer to task for message pump kworker thread
- * @pump_messages: work struct for scheduling work to the message pump
- * @queue_lock: spinlock to syncronise access to message queue
- * @queue: message queue
- * @cur_msg: the currently in-flight message
- * @busy: message pump is busy
- * @running: message pump is running
- * @rt: whether this queue is set to run as a realtime task
- * @prepare_transfer_hardware: a message will soon arrive from the queue
- *	so the subsystem requests the driver to prepare the transfer hardware
- *	by issuing this call
- * @transfer_one_message: the subsystem calls the driver to transfer a single
- *	message while queuing transfers that arrive in the meantime. When the
- *	driver is finished with this message, it must call
- *	spi_finalize_current_message() so the subsystem can issue the next
- *	transfer
- * @unprepare_transfer_hardware: there are currently no more messages on the
- *	queue so the subsystem notifies the driver that it may relax the
- *	hardware by issuing this call
- *
- * Each SPI master controller can communicate with one or more @spi_device
- * children.  These make a small bus, sharing MOSI, MISO and SCK signals
- * but not chip select signals.  Each device may be configured to use a
- * different clock rate, since those shared signals are ignored unless
- * the chip is selected.
- *
- * The driver for an SPI controller manages access to those devices through
- * a queue of spi_message transactions, copying data between CPU memory and
- * an SPI slave device.  For each such message it queues, it calls the
- * message's completion function when the transaction completes.
- */
-struct spi_master {
-	struct device	dev;
-
-	struct list_head list;
-
-	/* other than negative (== assign one dynamically), bus_num is fully
-	 * board-specific.  usually that simplifies to being SOC-specific.
-	 * example:  one SOC has three SPI controllers, numbered 0..2,
-	 * and one board's schematics might show it using SPI-2.  software
-	 * would normally use bus_num=2 for that controller.
-	 */
-	s16			bus_num;
-
-	/* chipselects will be integral to many controllers; some others
-	 * might use board-specific GPIOs.
-	 */
-	u16			num_chipselect;
-
-	/* some SPI controllers pose alignment requirements on DMAable
-	 * buffers; let protocol drivers know about these requirements.
-	 */
-	u16			dma_alignment;
-
-	/* spi_device.mode flags understood by this controller driver */
-	u16			mode_bits;
-
-	/* other constraints relevant to this driver */
-	u16			flags;
-#define SPI_MASTER_HALF_DUPLEX	BIT(0)		/* can't do full duplex */
-#define SPI_MASTER_NO_RX	BIT(1)		/* can't do buffer read */
-#define SPI_MASTER_NO_TX	BIT(2)		/* can't do buffer write */
-
-	/* lock and mutex for SPI bus locking */
-	spinlock_t		bus_lock_spinlock;
-	struct mutex		bus_lock_mutex;
-
-	/* flag indicating that the SPI bus is locked for exclusive use */
-	bool			bus_lock_flag;
-
-	/* Setup mode and clock, etc (spi driver may call many times).
-	 *
-	 * IMPORTANT:  this may be called when transfers to another
-	 * device are active.  DO NOT UPDATE SHARED REGISTERS in ways
-	 * which could break those transfers.
-	 */
-	int			(*setup)(struct spi_device *spi);
-
-	/* bidirectional bulk transfers
-	 *
-	 * + The transfer() method may not sleep; its main role is
-	 *   just to add the message to the queue.
-	 * + For now there's no remove-from-queue operation, or
-	 *   any other request management
-	 * + To a given spi_device, message queueing is pure fifo
-	 *
-	 * + The master's main job is to process its message queue,
-	 *   selecting a chip then transferring data
-	 * + If there are multiple spi_device children, the i/o queue
-	 *   arbitration algorithm is unspecified (round robin, fifo,
-	 *   priority, reservations, preemption, etc)
-	 *
-	 * + Chipselect stays active during the entire message
-	 *   (unless modified by spi_transfer.cs_change != 0).
-	 * + The message transfers use clock and SPI mode parameters
-	 *   previously established by setup() for this device
-	 */
-	int			(*transfer)(struct spi_device *spi,
-						struct spi_message *mesg);
-
-	/* called on release() to free memory provided by spi_master */
-	void			(*cleanup)(struct spi_device *spi);
-
-	/*
-	 * These hooks are for drivers that want to use the generic
-	 * master transfer queueing mechanism. If these are used, the
-	 * transfer() function above must NOT be specified by the driver.
-	 * Over time we expect SPI drivers to be phased over to this API.
-	 */
-	bool				queued;
-	struct kthread_worker		kworker;
-	struct task_struct		*kworker_task;
-	struct kthread_work		pump_messages;
-	spinlock_t			queue_lock;
-	struct list_head		queue;
-	struct spi_message		*cur_msg;
-	bool				busy;
-	bool				running;
-	bool				rt;
-
-	int (*prepare_transfer_hardware)(struct spi_master *master);
-	int (*transfer_one_message)(struct spi_master *master,
-				    struct spi_message *mesg);
-	int (*unprepare_transfer_hardware)(struct spi_master *master);
-};
-
-static inline void *spi_master_get_devdata(struct spi_master *master)
-{
-	return dev_get_drvdata(&master->dev);
-}
-
-static inline void spi_master_set_devdata(struct spi_master *master, void *data)
-{
-	dev_set_drvdata(&master->dev, data);
-}
-
-static inline struct spi_master *spi_master_get(struct spi_master *master)
-{
-	if (!master || !get_device(&master->dev))
-		return NULL;
-	return master;
-}
-
-static inline void spi_master_put(struct spi_master *master)
-{
-	if (master)
-		put_device(&master->dev);
-}
-
-/* PM calls that need to be issued by the driver */
-extern int spi_master_suspend(struct spi_master *master);
-extern int spi_master_resume(struct spi_master *master);
-
-/* Calls the driver make to interact with the message queue */
-extern struct spi_message *spi_get_next_queued_message(struct spi_master *master);
-extern void spi_finalize_current_message(struct spi_master *master);
-
-/* the spi driver core manages memory for the spi_master classdev */
-extern struct spi_master *
-spi_alloc_master(struct device *host, unsigned size);
-
-extern int spi_register_master(struct spi_master *master);
-extern void spi_unregister_master(struct spi_master *master);
-
-extern struct spi_master *spi_busnum_to_master(u16 busnum);
-
-/*---------------------------------------------------------------------------*/
-
-/*
- * I/O INTERFACE between SPI controller and protocol drivers
- *
- * Protocol drivers use a queue of spi_messages, each transferring data
- * between the controller and memory buffers.
- *
- * The spi_messages themselves consist of a series of read+write transfer
- * segments.  Those segments always read the same number of bits as they
- * write; but one or the other is easily ignored by passing a null buffer
- * pointer.  (This is unlike most types of I/O API, because SPI hardware
- * is full duplex.)
- *
- * NOTE:  Allocation of spi_transfer and spi_message memory is entirely
- * up to the protocol driver, which guarantees the integrity of both (as
- * well as the data buffers) for as long as the message is queued.
- */
-
-/**
- * struct spi_transfer - a read/write buffer pair
- * @tx_buf: data to be written (dma-safe memory), or NULL
- * @rx_buf: data to be read (dma-safe memory), or NULL
- * @tx_dma: DMA address of tx_buf, if @spi_message.is_dma_mapped
- * @rx_dma: DMA address of rx_buf, if @spi_message.is_dma_mapped
- * @len: size of rx and tx buffers (in bytes)
- * @speed_hz: Select a speed other than the device default for this
- *      transfer. If 0 the default (from @spi_device) is used.
- * @bits_per_word: select a bits_per_word other than the device default
- *      for this transfer. If 0 the default (from @spi_device) is used.
- * @cs_change: affects chipselect after this transfer completes
- * @delay_usecs: microseconds to delay after this transfer before
- *	(optionally) changing the chipselect status, then starting
- *	the next transfer or completing this @spi_message.
- * @transfer_list: transfers are sequenced through @spi_message.transfers
- *
- * SPI transfers always write the same number of bytes as they read.
- * Protocol drivers should always provide @rx_buf and/or @tx_buf.
- * In some cases, they may also want to provide DMA addresses for
- * the data being transferred; that may reduce overhead, when the
- * underlying driver uses dma.
- *
- * If the transmit buffer is null, zeroes will be shifted out
- * while filling @rx_buf.  If the receive buffer is null, the data
- * shifted in will be discarded.  Only "len" bytes shift out (or in).
- * It's an error to try to shift out a partial word.  (For example, by
- * shifting out three bytes with word size of sixteen or twenty bits;
- * the former uses two bytes per word, the latter uses four bytes.)
- *
- * In-memory data values are always in native CPU byte order, translated
- * from the wire byte order (big-endian except with SPI_LSB_FIRST).  So
- * for example when bits_per_word is sixteen, buffers are 2N bytes long
- * (@len = 2N) and hold N sixteen bit words in CPU byte order.
- *
- * When the word size of the SPI transfer is not a power-of-two multiple
- * of eight bits, those in-memory words include extra bits.  In-memory
- * words are always seen by protocol drivers as right-justified, so the
- * undefined (rx) or unused (tx) bits are always the most significant bits.
- *
- * All SPI transfers start with the relevant chipselect active.  Normally
- * it stays selected until after the last transfer in a message.  Drivers
- * can affect the chipselect signal using cs_change.
- *
- * (i) If the transfer isn't the last one in the message, this flag is
- * used to make the chipselect briefly go inactive in the middle of the
- * message.  Toggling chipselect in this way may be needed to terminate
- * a chip command, letting a single spi_message perform all of group of
- * chip transactions together.
- *
- * (ii) When the transfer is the last one in the message, the chip may
- * stay selected until the next transfer.  On multi-device SPI busses
- * with nothing blocking messages going to other devices, this is just
- * a performance hint; starting a message to another device deselects
- * this one.  But in other cases, this can be used to ensure correctness.
- * Some devices need protocol transactions to be built from a series of
- * spi_message submissions, where the content of one message is determined
- * by the results of previous messages and where the whole transaction
- * ends when the chipselect goes intactive.
- *
- * The code that submits an spi_message (and its spi_transfers)
- * to the lower layers is responsible for managing its memory.
- * Zero-initialize every field you don't set up explicitly, to
- * insulate against future API updates.  After you submit a message
- * and its transfers, ignore them until its completion callback.
- */
-struct spi_transfer {
-	/* it's ok if tx_buf == rx_buf (right?)
-	 * for MicroWire, one buffer must be null
-	 * buffers must work with dma_*map_single() calls, unless
-	 *   spi_message.is_dma_mapped reports a pre-existing mapping
-	 */
-	const void	*tx_buf;
-	void		*rx_buf;
-	unsigned	len;
-
-	dma_addr_t	tx_dma;
-	dma_addr_t	rx_dma;
-
-	unsigned	cs_change:1;
-	u8		bits_per_word;
-	u16		delay_usecs;
-	u32		speed_hz;
-
-	struct list_head transfer_list;
-};
-
-/**
- * struct spi_message - one multi-segment SPI transaction
- * @transfers: list of transfer segments in this transaction
- * @spi: SPI device to which the transaction is queued
- * @is_dma_mapped: if true, the caller provided both dma and cpu virtual
- *	addresses for each transfer buffer
- * @complete: called to report transaction completions
- * @context: the argument to complete() when it's called
- * @actual_length: the total number of bytes that were transferred in all
- *	successful segments
- * @status: zero for success, else negative errno
- * @queue: for use by whichever driver currently owns the message
- * @state: for use by whichever driver currently owns the message
- *
- * A @spi_message is used to execute an atomic sequence of data transfers,
- * each represented by a struct spi_transfer.  The sequence is "atomic"
- * in the sense that no other spi_message may use that SPI bus until that
- * sequence completes.  On some systems, many such sequences can execute as
- * as single programmed DMA transfer.  On all systems, these messages are
- * queued, and might complete after transactions to other devices.  Messages
- * sent to a given spi_device are alway executed in FIFO order.
- *
- * The code that submits an spi_message (and its spi_transfers)
- * to the lower layers is responsible for managing its memory.
- * Zero-initialize every field you don't set up explicitly, to
- * insulate against future API updates.  After you submit a message
- * and its transfers, ignore them until its completion callback.
- */
-struct spi_message {
-	struct list_head	transfers;
-
-	struct spi_device	*spi;
-
-	unsigned		is_dma_mapped:1;
-
-	/* REVISIT:  we might want a flag affecting the behavior of the
-	 * last transfer ... allowing things like "read 16 bit length L"
-	 * immediately followed by "read L bytes".  Basically imposing
-	 * a specific message scheduling algorithm.
-	 *
-	 * Some controller drivers (message-at-a-time queue processing)
-	 * could provide that as their default scheduling algorithm.  But
-	 * others (with multi-message pipelines) could need a flag to
-	 * tell them about such special cases.
-	 */
-
-	/* completion is reported through a callback */
-	void			(*complete)(void *context);
-	void			*context;
-	unsigned		actual_length;
-	int			status;
-
-	/* for optional use by whatever driver currently owns the
-	 * spi_message ...  between calls to spi_async and then later
-	 * complete(), that's the spi_master controller driver.
-	 */
-	struct list_head	queue;
-	void			*state;
-};
-
-static inline void spi_message_init(struct spi_message *m)
-{
-	memset(m, 0, sizeof *m);
-	INIT_LIST_HEAD(&m->transfers);
-}
-
-static inline void
-spi_message_add_tail(struct spi_transfer *t, struct spi_message *m)
-{
-	list_add_tail(&t->transfer_list, &m->transfers);
-}
-
-static inline void
-spi_transfer_del(struct spi_transfer *t)
-{
-	list_del(&t->transfer_list);
-}
-
-/* It's fine to embed message and transaction structures in other data
- * structures so long as you don't free them while they're in use.
- */
-
-static inline struct spi_message *spi_message_alloc(unsigned ntrans, gfp_t flags)
-{
-	struct spi_message *m;
-
-	m = kzalloc(sizeof(struct spi_message)
-			+ ntrans * sizeof(struct spi_transfer),
-			flags);
-	if (m) {
-		unsigned i;
-		struct spi_transfer *t = (struct spi_transfer *)(m + 1);
-
-		INIT_LIST_HEAD(&m->transfers);
-		for (i = 0; i < ntrans; i++, t++)
-			spi_message_add_tail(t, m);
-	}
-	return m;
-}
-
-static inline void spi_message_free(struct spi_message *m)
-{
-	kfree(m);
-}
-
-extern int spi_setup(struct spi_device *spi);
-extern int spi_async(struct spi_device *spi, struct spi_message *message);
-extern int spi_async_locked(struct spi_device *spi,
-			    struct spi_message *message);
-
-/*---------------------------------------------------------------------------*/
-
-/* All these synchronous SPI transfer routines are utilities layered
- * over the core async transfer primitive.  Here, "synchronous" means
- * they will sleep uninterruptibly until the async transfer completes.
- */
-
-extern int spi_sync(struct spi_device *spi, struct spi_message *message);
-extern int spi_sync_locked(struct spi_device *spi, struct spi_message *message);
-extern int spi_bus_lock(struct spi_master *master);
-extern int spi_bus_unlock(struct spi_master *master);
-
-/**
- * spi_write - SPI synchronous write
- * @spi: device to which data will be written
- * @buf: data buffer
- * @len: data buffer size
- * Context: can sleep
- *
- * This writes the buffer and returns zero or a negative error code.
- * Callable only from contexts that can sleep.
- */
-static inline int
-spi_write(struct spi_device *spi, const void *buf, size_t len)
-{
-	struct spi_transfer	t = {
-			.tx_buf		= buf,
-			.len		= len,
-		};
-	struct spi_message	m;
-
-	spi_message_init(&m);
-	spi_message_add_tail(&t, &m);
-	return spi_sync(spi, &m);
-}
-
-/**
- * spi_read - SPI synchronous read
- * @spi: device from which data will be read
- * @buf: data buffer
- * @len: data buffer size
- * Context: can sleep
- *
- * This reads the buffer and returns zero or a negative error code.
- * Callable only from contexts that can sleep.
- */
-static inline int
-spi_read(struct spi_device *spi, void *buf, size_t len)
-{
-	struct spi_transfer	t = {
-			.rx_buf		= buf,
-			.len		= len,
-		};
-	struct spi_message	m;
-
-	spi_message_init(&m);
-	spi_message_add_tail(&t, &m);
-	return spi_sync(spi, &m);
-}
-
-/* this copies txbuf and rxbuf data; for small transfers only! */
-extern int spi_write_then_read(struct spi_device *spi,
-		const void *txbuf, unsigned n_tx,
-		void *rxbuf, unsigned n_rx);
-
-/**
- * spi_w8r8 - SPI synchronous 8 bit write followed by 8 bit read
- * @spi: device with which data will be exchanged
- * @cmd: command to be written before data is read back
- * Context: can sleep
- *
- * This returns the (unsigned) eight bit number returned by the
- * device, or else a negative error code.  Callable only from
- * contexts that can sleep.
- */
-static inline ssize_t spi_w8r8(struct spi_device *spi, u8 cmd)
-{
-	ssize_t			status;
-	u8			result;
-
-	status = spi_write_then_read(spi, &cmd, 1, &result, 1);
-
-	/* return negative errno or unsigned value */
-	return (status < 0) ? status : result;
-}
-
-/**
- * spi_w8r16 - SPI synchronous 8 bit write followed by 16 bit read
- * @spi: device with which data will be exchanged
- * @cmd: command to be written before data is read back
- * Context: can sleep
- *
- * This returns the (unsigned) sixteen bit number returned by the
- * device, or else a negative error code.  Callable only from
- * contexts that can sleep.
- *
- * The number is returned in wire-order, which is at least sometimes
- * big-endian.
- */
-static inline ssize_t spi_w8r16(struct spi_device *spi, u8 cmd)
-{
-	ssize_t			status;
-	u16			result;
-
-	status = spi_write_then_read(spi, &cmd, 1, (u8 *) &result, 2);
-
-	/* return negative errno or unsigned value */
-	return (status < 0) ? status : result;
-}
-
-/*---------------------------------------------------------------------------*/
-
-/*
- * INTERFACE between board init code and SPI infrastructure.
- *
- * No SPI driver ever sees these SPI device table segments, but
- * it's how the SPI core (or adapters that get hotplugged) grows
- * the driver model tree.
- *
- * As a rule, SPI devices can't be probed.  Instead, board init code
- * provides a table listing the devices which are present, with enough
- * information to bind and set up the device's driver.  There's basic
- * support for nonstatic configurations too; enough to handle adding
- * parport adapters, or microcontrollers acting as USB-to-SPI bridges.
- */
-
-/**
- * struct spi_board_info - board-specific template for a SPI device
- * @modalias: Initializes spi_device.modalias; identifies the driver.
- * @platform_data: Initializes spi_device.platform_data; the particular
- *	data stored there is driver-specific.
- * @controller_data: Initializes spi_device.controller_data; some
- *	controllers need hints about hardware setup, e.g. for DMA.
- * @irq: Initializes spi_device.irq; depends on how the board is wired.
- * @max_speed_hz: Initializes spi_device.max_speed_hz; based on limits
- *	from the chip datasheet and board-specific signal quality issues.
- * @bus_num: Identifies which spi_master parents the spi_device; unused
- *	by spi_new_device(), and otherwise depends on board wiring.
- * @chip_select: Initializes spi_device.chip_select; depends on how
- *	the board is wired.
- * @mode: Initializes spi_device.mode; based on the chip datasheet, board
- *	wiring (some devices support both 3WIRE and standard modes), and
- *	possibly presence of an inverter in the chipselect path.
- *
- * When adding new SPI devices to the device tree, these structures serve
- * as a partial device template.  They hold information which can't always
- * be determined by drivers.  Information that probe() can establish (such
- * as the default transfer wordsize) is not included here.
- *
- * These structures are used in two places.  Their primary role is to
- * be stored in tables of board-specific device descriptors, which are
- * declared early in board initialization and then used (much later) to
- * populate a controller's device tree after the that controller's driver
- * initializes.  A secondary (and atypical) role is as a parameter to
- * spi_new_device() call, which happens after those controller drivers
- * are active in some dynamic board configuration models.
- */
-struct spi_board_info {
-	/* the device name and module name are coupled, like platform_bus;
-	 * "modalias" is normally the driver name.
-	 *
-	 * platform_data goes to spi_device.dev.platform_data,
-	 * controller_data goes to spi_device.controller_data,
-	 * irq is copied too
-	 */
-	char		modalias[SPI_NAME_SIZE];
-	const void	*platform_data;
-	void		*controller_data;
-	int		irq;
-
-	/* slower signaling on noisy or low voltage boards */
-	u32		max_speed_hz;
-
-
-	/* bus_num is board specific and matches the bus_num of some
-	 * spi_master that will probably be registered later.
-	 *
-	 * chip_select reflects how this chip is wired to that master;
-	 * it's less than num_chipselect.
-	 */
-	u16		bus_num;
-	u16		chip_select;
-
-	/* mode becomes spi_device.mode, and is essential for chips
-	 * where the default of SPI_CS_HIGH = 0 is wrong.
-	 */
-	u8		mode;
-
-	/* ... may need additional spi_device chip config data here.
-	 * avoid stuff protocol drivers can set; but include stuff
-	 * needed to behave without being bound to a driver:
-	 *  - quirks like clock rate mattering when not selected
-	 */
-};
-
-#ifdef	CONFIG_SPI
-extern int
-spi_register_board_info(struct spi_board_info const *info, unsigned n);
-#else
-/* board init code may ignore whether SPI is configured or not */
-static inline int
-spi_register_board_info(struct spi_board_info const *info, unsigned n)
-	{ return 0; }
-#endif
-
-
-/* If you're hotplugging an adapter with devices (parport, usb, etc)
- * use spi_new_device() to describe each device.  You can also call
- * spi_unregister_device() to start making that device vanish, but
- * normally that would be handled by spi_unregister_master().
- *
- * You can also use spi_alloc_device() and spi_add_device() to use a two
- * stage registration sequence for each spi_device.  This gives the caller
- * some more control over the spi_device structure before it is registered,
- * but requires that caller to initialize fields that would otherwise
- * be defined using the board info.
- */
-extern struct spi_device *
-spi_alloc_device(struct spi_master *master);
-
-extern int
-spi_add_device(struct spi_device *spi);
-
-extern struct spi_device *
-spi_new_device(struct spi_master *, struct spi_board_info *);
-
-static inline void
-spi_unregister_device(struct spi_device *spi)
-{
-	if (spi)
-		device_unregister(&spi->dev);
-}
-
-extern const struct spi_device_id *
-spi_get_device_id(const struct spi_device *sdev);
-
-#endif /* __LINUX_SPI_H */
diff --git a/ANDROID_3.4.5/include/linux/spi/spi_bitbang.h b/ANDROID_3.4.5/include/linux/spi/spi_bitbang.h
deleted file mode 100644
index f987a2be..00000000
--- a/ANDROID_3.4.5/include/linux/spi/spi_bitbang.h
+++ /dev/null
@@ -1,52 +0,0 @@
-#ifndef	__SPI_BITBANG_H
-#define	__SPI_BITBANG_H
-
-#include <linux/workqueue.h>
-
-struct spi_bitbang {
-	struct workqueue_struct	*workqueue;
-	struct work_struct	work;
-
-	spinlock_t		lock;
-	struct list_head	queue;
-	u8			busy;
-	u8			use_dma;
-	u8			flags;		/* extra spi->mode support */
-
-	struct spi_master	*master;
-
-	/* setup_transfer() changes clock and/or wordsize to match settings
-	 * for this transfer; zeroes restore defaults from spi_device.
-	 */
-	int	(*setup_transfer)(struct spi_device *spi,
-			struct spi_transfer *t);
-
-	void	(*chipselect)(struct spi_device *spi, int is_on);
-#define	BITBANG_CS_ACTIVE	1	/* normally nCS, active low */
-#define	BITBANG_CS_INACTIVE	0
-
-	/* txrx_bufs() may handle dma mapping for transfers that don't
-	 * already have one (transfer.{tx,rx}_dma is zero), or use PIO
-	 */
-	int	(*txrx_bufs)(struct spi_device *spi, struct spi_transfer *t);
-
-	/* txrx_word[SPI_MODE_*]() just looks like a shift register */
-	u32	(*txrx_word[4])(struct spi_device *spi,
-			unsigned nsecs,
-			u32 word, u8 bits);
-};
-
-/* you can call these default bitbang->master methods from your custom
- * methods, if you like.
- */
-extern int spi_bitbang_setup(struct spi_device *spi);
-extern void spi_bitbang_cleanup(struct spi_device *spi);
-extern int spi_bitbang_transfer(struct spi_device *spi, struct spi_message *m);
-extern int spi_bitbang_setup_transfer(struct spi_device *spi,
-				      struct spi_transfer *t);
-
-/* start or stop queue processing */
-extern int spi_bitbang_start(struct spi_bitbang *spi);
-extern int spi_bitbang_stop(struct spi_bitbang *spi);
-
-#endif	/* __SPI_BITBANG_H */
diff --git a/ANDROID_3.4.5/include/linux/spi/spi_gpio.h b/ANDROID_3.4.5/include/linux/spi/spi_gpio.h
deleted file mode 100644
index 369b3d7d..00000000
--- a/ANDROID_3.4.5/include/linux/spi/spi_gpio.h
+++ /dev/null
@@ -1,71 +0,0 @@
-#ifndef __LINUX_SPI_GPIO_H
-#define __LINUX_SPI_GPIO_H
-
-/*
- * For each bitbanged SPI bus, set up a platform_device node with:
- *   - name "spi_gpio"
- *   - id the same as the SPI bus number it implements
- *   - dev.platform data pointing to a struct spi_gpio_platform_data
- *
- * Or, see the driver code for information about speedups that are
- * possible on platforms that support inlined access for GPIOs (no
- * spi_gpio_platform_data is used).
- *
- * Use spi_board_info with these busses in the usual way, being sure
- * that the controller_data being the GPIO used for each device's
- * chipselect:
- *
- *	static struct spi_board_info ... [] = {
- *	...
- *		// this slave uses GPIO 42 for its chipselect
- *		.controller_data = (void *) 42,
- *	...
- *		// this one uses GPIO 86 for its chipselect
- *		.controller_data = (void *) 86,
- *	...
- *	};
- *
- * If chipselect is not used (there's only one device on the bus), assign
- * SPI_GPIO_NO_CHIPSELECT to the controller_data:
- *		.controller_data = (void *) SPI_GPIO_NO_CHIPSELECT;
- *
- * If the MISO or MOSI pin is not available then it should be set to
- * SPI_GPIO_NO_MISO or SPI_GPIO_NO_MOSI.
- *
- * If the bitbanged bus is later switched to a "native" controller,
- * that platform_device and controller_data should be removed.
- */
-
-#define SPI_GPIO_NO_CHIPSELECT		((unsigned long)-1l)
-#define SPI_GPIO_NO_MISO		((unsigned long)-1l)
-#define SPI_GPIO_NO_MOSI		((unsigned long)-1l)
-
-/**
- * struct spi_gpio_platform_data - parameter for bitbanged SPI master
- * @sck: number of the GPIO used for clock output
- * @mosi: number of the GPIO used for Master Output, Slave In (MOSI) data
- * @miso: number of the GPIO used for Master Input, Slave Output (MISO) data
- * @num_chipselect: how many slaves to allow
- *
- * All GPIO signals used with the SPI bus managed through this driver
- * (chipselects, MOSI, MISO, SCK) must be configured as GPIOs, instead
- * of some alternate function.
- *
- * It can be convenient to use this driver with pins that have alternate
- * functions associated with a "native" SPI controller if a driver for that
- * controller is not available, or is missing important functionality.
- *
- * On platforms which can do so, configure MISO with a weak pullup unless
- * there's an external pullup on that signal.  That saves power by avoiding
- * floating signals.  (A weak pulldown would save power too, but many
- * drivers expect to see all-ones data as the no slave "response".)
- */
-struct spi_gpio_platform_data {
-	unsigned	sck;
-	unsigned	mosi;
-	unsigned	miso;
-
-	u16		num_chipselect;
-};
-
-#endif /* __LINUX_SPI_GPIO_H */
diff --git a/ANDROID_3.4.5/include/linux/spi/spi_oc_tiny.h b/ANDROID_3.4.5/include/linux/spi/spi_oc_tiny.h
deleted file mode 100644
index 1ac529cf..00000000
--- a/ANDROID_3.4.5/include/linux/spi/spi_oc_tiny.h
+++ /dev/null
@@ -1,20 +0,0 @@
-#ifndef _LINUX_SPI_SPI_OC_TINY_H
-#define _LINUX_SPI_SPI_OC_TINY_H
-
-/**
- * struct tiny_spi_platform_data - platform data of the OpenCores tiny SPI
- * @freq:	input clock freq to the core.
- * @baudwidth:	baud rate divider width of the core.
- * @gpio_cs_count:	number of gpio pins used for chipselect.
- * @gpio_cs:	array of gpio pins used for chipselect.
- *
- * freq and baudwidth are used only if the divider is programmable.
- */
-struct tiny_spi_platform_data {
-	unsigned int freq;
-	unsigned int baudwidth;
-	unsigned int gpio_cs_count;
-	int *gpio_cs;
-};
-
-#endif /* _LINUX_SPI_SPI_OC_TINY_H */
diff --git a/ANDROID_3.4.5/include/linux/spi/spidev.h b/ANDROID_3.4.5/include/linux/spi/spidev.h
deleted file mode 100644
index 52d9ed01..00000000
--- a/ANDROID_3.4.5/include/linux/spi/spidev.h
+++ /dev/null
@@ -1,131 +0,0 @@
-/*
- * include/linux/spi/spidev.h
- *
- * Copyright (C) 2006 SWAPP
- *	Andrea Paterniani <a.paterniani@swapp-eng.it>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-  */
-
-#ifndef SPIDEV_H
-#define SPIDEV_H
-
-#include <linux/types.h>
-
-/* User space versions of kernel symbols for SPI clocking modes,
- * matching <linux/spi/spi.h>
- */
-
-#define SPI_CPHA		0x01
-#define SPI_CPOL		0x02
-
-#define SPI_MODE_0		(0|0)
-#define SPI_MODE_1		(0|SPI_CPHA)
-#define SPI_MODE_2		(SPI_CPOL|0)
-#define SPI_MODE_3		(SPI_CPOL|SPI_CPHA)
-
-#define SPI_CS_HIGH		0x04
-#define SPI_LSB_FIRST		0x08
-#define SPI_3WIRE		0x10
-#define SPI_LOOP		0x20
-#define SPI_NO_CS		0x40
-#define SPI_READY		0x80
-
-/*---------------------------------------------------------------------------*/
-
-/* IOCTL commands */
-
-#define SPI_IOC_MAGIC			'k'
-
-/**
- * struct spi_ioc_transfer - describes a single SPI transfer
- * @tx_buf: Holds pointer to userspace buffer with transmit data, or null.
- *	If no data is provided, zeroes are shifted out.
- * @rx_buf: Holds pointer to userspace buffer for receive data, or null.
- * @len: Length of tx and rx buffers, in bytes.
- * @speed_hz: Temporary override of the device's bitrate.
- * @bits_per_word: Temporary override of the device's wordsize.
- * @delay_usecs: If nonzero, how long to delay after the last bit transfer
- *	before optionally deselecting the device before the next transfer.
- * @cs_change: True to deselect device before starting the next transfer.
- *
- * This structure is mapped directly to the kernel spi_transfer structure;
- * the fields have the same meanings, except of course that the pointers
- * are in a different address space (and may be of different sizes in some
- * cases, such as 32-bit i386 userspace over a 64-bit x86_64 kernel).
- * Zero-initialize the structure, including currently unused fields, to
- * accommodate potential future updates.
- *
- * SPI_IOC_MESSAGE gives userspace the equivalent of kernel spi_sync().
- * Pass it an array of related transfers, they'll execute together.
- * Each transfer may be half duplex (either direction) or full duplex.
- *
- *	struct spi_ioc_transfer mesg[4];
- *	...
- *	status = ioctl(fd, SPI_IOC_MESSAGE(4), mesg);
- *
- * So for example one transfer might send a nine bit command (right aligned
- * in a 16-bit word), the next could read a block of 8-bit data before
- * terminating that command by temporarily deselecting the chip; the next
- * could send a different nine bit command (re-selecting the chip), and the
- * last transfer might write some register values.
- */
-struct spi_ioc_transfer {
-	__u64		tx_buf;
-	__u64		rx_buf;
-
-	__u32		len;
-	__u32		speed_hz;
-
-	__u16		delay_usecs;
-	__u8		bits_per_word;
-	__u8		cs_change;
-	__u32		pad;
-
-	/* If the contents of 'struct spi_ioc_transfer' ever change
-	 * incompatibly, then the ioctl number (currently 0) must change;
-	 * ioctls with constant size fields get a bit more in the way of
-	 * error checking than ones (like this) where that field varies.
-	 *
-	 * NOTE: struct layout is the same in 64bit and 32bit userspace.
-	 */
-};
-
-/* not all platforms use <asm-generic/ioctl.h> or _IOC_TYPECHECK() ... */
-#define SPI_MSGSIZE(N) \
-	((((N)*(sizeof (struct spi_ioc_transfer))) < (1 << _IOC_SIZEBITS)) \
-		? ((N)*(sizeof (struct spi_ioc_transfer))) : 0)
-#define SPI_IOC_MESSAGE(N) _IOW(SPI_IOC_MAGIC, 0, char[SPI_MSGSIZE(N)])
-
-
-/* Read / Write of SPI mode (SPI_MODE_0..SPI_MODE_3) */
-#define SPI_IOC_RD_MODE			_IOR(SPI_IOC_MAGIC, 1, __u8)
-#define SPI_IOC_WR_MODE			_IOW(SPI_IOC_MAGIC, 1, __u8)
-
-/* Read / Write SPI bit justification */
-#define SPI_IOC_RD_LSB_FIRST		_IOR(SPI_IOC_MAGIC, 2, __u8)
-#define SPI_IOC_WR_LSB_FIRST		_IOW(SPI_IOC_MAGIC, 2, __u8)
-
-/* Read / Write SPI device word length (1..N) */
-#define SPI_IOC_RD_BITS_PER_WORD	_IOR(SPI_IOC_MAGIC, 3, __u8)
-#define SPI_IOC_WR_BITS_PER_WORD	_IOW(SPI_IOC_MAGIC, 3, __u8)
-
-/* Read / Write SPI device default max speed hz */
-#define SPI_IOC_RD_MAX_SPEED_HZ		_IOR(SPI_IOC_MAGIC, 4, __u32)
-#define SPI_IOC_WR_MAX_SPEED_HZ		_IOW(SPI_IOC_MAGIC, 4, __u32)
-
-
-
-#endif /* SPIDEV_H */
diff --git a/ANDROID_3.4.5/include/linux/spi/tdo24m.h b/ANDROID_3.4.5/include/linux/spi/tdo24m.h
deleted file mode 100644
index 7572d4e1..00000000
--- a/ANDROID_3.4.5/include/linux/spi/tdo24m.h
+++ /dev/null
@@ -1,13 +0,0 @@
-#ifndef __TDO24M_H__
-#define __TDO24M_H__
-
-enum tdo24m_model {
-	TDO24M,
-	TDO35S,
-};
-
-struct tdo24m_platform_data {
-	enum tdo24m_model model;
-};
-
-#endif /* __TDO24M_H__ */
diff --git a/ANDROID_3.4.5/include/linux/spi/tle62x0.h b/ANDROID_3.4.5/include/linux/spi/tle62x0.h
deleted file mode 100644
index 60b59187..00000000
--- a/ANDROID_3.4.5/include/linux/spi/tle62x0.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * tle62x0.h - platform glue to Infineon TLE62x0 driver chips
- *
- * Copyright 2007 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-*/
-
-struct tle62x0_pdata {
-	unsigned int		init_state;
-	unsigned int		gpio_count;
-};
diff --git a/ANDROID_3.4.5/include/linux/spi/tsc2005.h b/ANDROID_3.4.5/include/linux/spi/tsc2005.h
deleted file mode 100644
index d9b0c842..00000000
--- a/ANDROID_3.4.5/include/linux/spi/tsc2005.h
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- * This file is part of TSC2005 touchscreen driver
- *
- * Copyright (C) 2009-2010 Nokia Corporation
- *
- * Contact: Aaro Koskinen <aaro.koskinen@nokia.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-
-#ifndef _LINUX_SPI_TSC2005_H
-#define _LINUX_SPI_TSC2005_H
-
-#include <linux/types.h>
-
-struct tsc2005_platform_data {
-	int		ts_pressure_max;
-	int		ts_pressure_fudge;
-	int		ts_x_max;
-	int		ts_x_fudge;
-	int		ts_y_max;
-	int		ts_y_fudge;
-	int		ts_x_plate_ohm;
-	unsigned int	esd_timeout_ms;
-	void		(*set_reset)(bool enable);
-};
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/spi/xilinx_spi.h b/ANDROID_3.4.5/include/linux/spi/xilinx_spi.h
deleted file mode 100644
index 6f172788..00000000
--- a/ANDROID_3.4.5/include/linux/spi/xilinx_spi.h
+++ /dev/null
@@ -1,20 +0,0 @@
-#ifndef __LINUX_SPI_XILINX_SPI_H
-#define __LINUX_SPI_XILINX_SPI_H
-
-/**
- * struct xspi_platform_data - Platform data of the Xilinx SPI driver
- * @num_chipselect:	Number of chip select by the IP.
- * @little_endian:	If registers should be accessed little endian or not.
- * @bits_per_word:	Number of bits per word.
- * @devices:		Devices to add when the driver is probed.
- * @num_devices:	Number of devices in the devices array.
- */
-struct xspi_platform_data {
-	u16 num_chipselect;
-	bool little_endian;
-	u8 bits_per_word;
-	struct spi_board_info *devices;
-	u8 num_devices;
-};
-
-#endif /* __LINUX_SPI_XILINX_SPI_H */
diff --git a/ANDROID_3.4.5/include/linux/spinlock.h b/ANDROID_3.4.5/include/linux/spinlock.h
deleted file mode 100644
index 7d537ced..00000000
--- a/ANDROID_3.4.5/include/linux/spinlock.h
+++ /dev/null
@@ -1,397 +0,0 @@
-#ifndef __LINUX_SPINLOCK_H
-#define __LINUX_SPINLOCK_H
-
-/*
- * include/linux/spinlock.h - generic spinlock/rwlock declarations
- *
- * here's the role of the various spinlock/rwlock related include files:
- *
- * on SMP builds:
- *
- *  asm/spinlock_types.h: contains the arch_spinlock_t/arch_rwlock_t and the
- *                        initializers
- *
- *  linux/spinlock_types.h:
- *                        defines the generic type and initializers
- *
- *  asm/spinlock.h:       contains the arch_spin_*()/etc. lowlevel
- *                        implementations, mostly inline assembly code
- *
- *   (also included on UP-debug builds:)
- *
- *  linux/spinlock_api_smp.h:
- *                        contains the prototypes for the _spin_*() APIs.
- *
- *  linux/spinlock.h:     builds the final spin_*() APIs.
- *
- * on UP builds:
- *
- *  linux/spinlock_type_up.h:
- *                        contains the generic, simplified UP spinlock type.
- *                        (which is an empty structure on non-debug builds)
- *
- *  linux/spinlock_types.h:
- *                        defines the generic type and initializers
- *
- *  linux/spinlock_up.h:
- *                        contains the arch_spin_*()/etc. version of UP
- *                        builds. (which are NOPs on non-debug, non-preempt
- *                        builds)
- *
- *   (included on UP-non-debug builds:)
- *
- *  linux/spinlock_api_up.h:
- *                        builds the _spin_*() APIs.
- *
- *  linux/spinlock.h:     builds the final spin_*() APIs.
- */
-
-#include <linux/typecheck.h>
-#include <linux/preempt.h>
-#include <linux/linkage.h>
-#include <linux/compiler.h>
-#include <linux/irqflags.h>
-#include <linux/thread_info.h>
-#include <linux/kernel.h>
-#include <linux/stringify.h>
-#include <linux/bottom_half.h>
-#include <asm/barrier.h>
-
-
-/*
- * Must define these before including other files, inline functions need them
- */
-#define LOCK_SECTION_NAME ".text..lock."KBUILD_BASENAME
-
-#define LOCK_SECTION_START(extra)               \
-        ".subsection 1\n\t"                     \
-        extra                                   \
-        ".ifndef " LOCK_SECTION_NAME "\n\t"     \
-        LOCK_SECTION_NAME ":\n\t"               \
-        ".endif\n"
-
-#define LOCK_SECTION_END                        \
-        ".previous\n\t"
-
-#define __lockfunc __attribute__((section(".spinlock.text")))
-
-/*
- * Pull the arch_spinlock_t and arch_rwlock_t definitions:
- */
-#include <linux/spinlock_types.h>
-
-/*
- * Pull the arch_spin*() functions/declarations (UP-nondebug doesn't need them):
- */
-#ifdef CONFIG_SMP
-# include <asm/spinlock.h>
-#else
-# include <linux/spinlock_up.h>
-#endif
-
-#ifdef CONFIG_DEBUG_SPINLOCK
-  extern void __raw_spin_lock_init(raw_spinlock_t *lock, const char *name,
-				   struct lock_class_key *key);
-# define raw_spin_lock_init(lock)				\
-do {								\
-	static struct lock_class_key __key;			\
-								\
-	__raw_spin_lock_init((lock), #lock, &__key);		\
-} while (0)
-
-#else
-# define raw_spin_lock_init(lock)				\
-	do { *(lock) = __RAW_SPIN_LOCK_UNLOCKED(lock); } while (0)
-#endif
-
-#define raw_spin_is_locked(lock)	arch_spin_is_locked(&(lock)->raw_lock)
-
-#ifdef CONFIG_GENERIC_LOCKBREAK
-#define raw_spin_is_contended(lock) ((lock)->break_lock)
-#else
-
-#ifdef arch_spin_is_contended
-#define raw_spin_is_contended(lock)	arch_spin_is_contended(&(lock)->raw_lock)
-#else
-#define raw_spin_is_contended(lock)	(((void)(lock), 0))
-#endif /*arch_spin_is_contended*/
-#endif
-
-/* The lock does not imply full memory barrier. */
-#ifndef ARCH_HAS_SMP_MB_AFTER_LOCK
-static inline void smp_mb__after_lock(void) { smp_mb(); }
-#endif
-
-/**
- * raw_spin_unlock_wait - wait until the spinlock gets unlocked
- * @lock: the spinlock in question.
- */
-#define raw_spin_unlock_wait(lock)	arch_spin_unlock_wait(&(lock)->raw_lock)
-
-#ifdef CONFIG_DEBUG_SPINLOCK
- extern void do_raw_spin_lock(raw_spinlock_t *lock) __acquires(lock);
-#define do_raw_spin_lock_flags(lock, flags) do_raw_spin_lock(lock)
- extern int do_raw_spin_trylock(raw_spinlock_t *lock);
- extern void do_raw_spin_unlock(raw_spinlock_t *lock) __releases(lock);
-#else
-static inline void do_raw_spin_lock(raw_spinlock_t *lock) __acquires(lock)
-{
-	__acquire(lock);
-	arch_spin_lock(&lock->raw_lock);
-}
-
-static inline void
-do_raw_spin_lock_flags(raw_spinlock_t *lock, unsigned long *flags) __acquires(lock)
-{
-	__acquire(lock);
-	arch_spin_lock_flags(&lock->raw_lock, *flags);
-}
-
-static inline int do_raw_spin_trylock(raw_spinlock_t *lock)
-{
-	return arch_spin_trylock(&(lock)->raw_lock);
-}
-
-static inline void do_raw_spin_unlock(raw_spinlock_t *lock) __releases(lock)
-{
-	arch_spin_unlock(&lock->raw_lock);
-	__release(lock);
-}
-#endif
-
-/*
- * Define the various spin_lock methods.  Note we define these
- * regardless of whether CONFIG_SMP or CONFIG_PREEMPT are set. The
- * various methods are defined as nops in the case they are not
- * required.
- */
-#define raw_spin_trylock(lock)	__cond_lock(lock, _raw_spin_trylock(lock))
-
-#define raw_spin_lock(lock)	_raw_spin_lock(lock)
-
-#ifdef CONFIG_DEBUG_LOCK_ALLOC
-# define raw_spin_lock_nested(lock, subclass) \
-	_raw_spin_lock_nested(lock, subclass)
-
-# define raw_spin_lock_nest_lock(lock, nest_lock)			\
-	 do {								\
-		 typecheck(struct lockdep_map *, &(nest_lock)->dep_map);\
-		 _raw_spin_lock_nest_lock(lock, &(nest_lock)->dep_map);	\
-	 } while (0)
-#else
-# define raw_spin_lock_nested(lock, subclass)		_raw_spin_lock(lock)
-# define raw_spin_lock_nest_lock(lock, nest_lock)	_raw_spin_lock(lock)
-#endif
-
-#if defined(CONFIG_SMP) || defined(CONFIG_DEBUG_SPINLOCK)
-
-#define raw_spin_lock_irqsave(lock, flags)			\
-	do {						\
-		typecheck(unsigned long, flags);	\
-		flags = _raw_spin_lock_irqsave(lock);	\
-	} while (0)
-
-#ifdef CONFIG_DEBUG_LOCK_ALLOC
-#define raw_spin_lock_irqsave_nested(lock, flags, subclass)		\
-	do {								\
-		typecheck(unsigned long, flags);			\
-		flags = _raw_spin_lock_irqsave_nested(lock, subclass);	\
-	} while (0)
-#else
-#define raw_spin_lock_irqsave_nested(lock, flags, subclass)		\
-	do {								\
-		typecheck(unsigned long, flags);			\
-		flags = _raw_spin_lock_irqsave(lock);			\
-	} while (0)
-#endif
-
-#else
-
-#define raw_spin_lock_irqsave(lock, flags)		\
-	do {						\
-		typecheck(unsigned long, flags);	\
-		_raw_spin_lock_irqsave(lock, flags);	\
-	} while (0)
-
-#define raw_spin_lock_irqsave_nested(lock, flags, subclass)	\
-	raw_spin_lock_irqsave(lock, flags)
-
-#endif
-
-#define raw_spin_lock_irq(lock)		_raw_spin_lock_irq(lock)
-#define raw_spin_lock_bh(lock)		_raw_spin_lock_bh(lock)
-#define raw_spin_unlock(lock)		_raw_spin_unlock(lock)
-#define raw_spin_unlock_irq(lock)	_raw_spin_unlock_irq(lock)
-
-#define raw_spin_unlock_irqrestore(lock, flags)		\
-	do {							\
-		typecheck(unsigned long, flags);		\
-		_raw_spin_unlock_irqrestore(lock, flags);	\
-	} while (0)
-#define raw_spin_unlock_bh(lock)	_raw_spin_unlock_bh(lock)
-
-#define raw_spin_trylock_bh(lock) \
-	__cond_lock(lock, _raw_spin_trylock_bh(lock))
-
-#define raw_spin_trylock_irq(lock) \
-({ \
-	local_irq_disable(); \
-	raw_spin_trylock(lock) ? \
-	1 : ({ local_irq_enable(); 0;  }); \
-})
-
-#define raw_spin_trylock_irqsave(lock, flags) \
-({ \
-	local_irq_save(flags); \
-	raw_spin_trylock(lock) ? \
-	1 : ({ local_irq_restore(flags); 0; }); \
-})
-
-/**
- * raw_spin_can_lock - would raw_spin_trylock() succeed?
- * @lock: the spinlock in question.
- */
-#define raw_spin_can_lock(lock)	(!raw_spin_is_locked(lock))
-
-/* Include rwlock functions */
-#include <linux/rwlock.h>
-
-/*
- * Pull the _spin_*()/_read_*()/_write_*() functions/declarations:
- */
-#if defined(CONFIG_SMP) || defined(CONFIG_DEBUG_SPINLOCK)
-# include <linux/spinlock_api_smp.h>
-#else
-# include <linux/spinlock_api_up.h>
-#endif
-
-/*
- * Map the spin_lock functions to the raw variants for PREEMPT_RT=n
- */
-
-static inline raw_spinlock_t *spinlock_check(spinlock_t *lock)
-{
-	return &lock->rlock;
-}
-
-#define spin_lock_init(_lock)				\
-do {							\
-	spinlock_check(_lock);				\
-	raw_spin_lock_init(&(_lock)->rlock);		\
-} while (0)
-
-static inline void spin_lock(spinlock_t *lock)
-{
-	raw_spin_lock(&lock->rlock);
-}
-
-static inline void spin_lock_bh(spinlock_t *lock)
-{
-	raw_spin_lock_bh(&lock->rlock);
-}
-
-static inline int spin_trylock(spinlock_t *lock)
-{
-	return raw_spin_trylock(&lock->rlock);
-}
-
-#define spin_lock_nested(lock, subclass)			\
-do {								\
-	raw_spin_lock_nested(spinlock_check(lock), subclass);	\
-} while (0)
-
-#define spin_lock_nest_lock(lock, nest_lock)				\
-do {									\
-	raw_spin_lock_nest_lock(spinlock_check(lock), nest_lock);	\
-} while (0)
-
-static inline void spin_lock_irq(spinlock_t *lock)
-{
-	raw_spin_lock_irq(&lock->rlock);
-}
-
-#define spin_lock_irqsave(lock, flags)				\
-do {								\
-	raw_spin_lock_irqsave(spinlock_check(lock), flags);	\
-} while (0)
-
-#define spin_lock_irqsave_nested(lock, flags, subclass)			\
-do {									\
-	raw_spin_lock_irqsave_nested(spinlock_check(lock), flags, subclass); \
-} while (0)
-
-static inline void spin_unlock(spinlock_t *lock)
-{
-	raw_spin_unlock(&lock->rlock);
-}
-
-static inline void spin_unlock_bh(spinlock_t *lock)
-{
-	raw_spin_unlock_bh(&lock->rlock);
-}
-
-static inline void spin_unlock_irq(spinlock_t *lock)
-{
-	raw_spin_unlock_irq(&lock->rlock);
-}
-
-static inline void spin_unlock_irqrestore(spinlock_t *lock, unsigned long flags)
-{
-	raw_spin_unlock_irqrestore(&lock->rlock, flags);
-}
-
-static inline int spin_trylock_bh(spinlock_t *lock)
-{
-	return raw_spin_trylock_bh(&lock->rlock);
-}
-
-static inline int spin_trylock_irq(spinlock_t *lock)
-{
-	return raw_spin_trylock_irq(&lock->rlock);
-}
-
-#define spin_trylock_irqsave(lock, flags)			\
-({								\
-	raw_spin_trylock_irqsave(spinlock_check(lock), flags); \
-})
-
-static inline void spin_unlock_wait(spinlock_t *lock)
-{
-	raw_spin_unlock_wait(&lock->rlock);
-}
-
-static inline int spin_is_locked(spinlock_t *lock)
-{
-	return raw_spin_is_locked(&lock->rlock);
-}
-
-static inline int spin_is_contended(spinlock_t *lock)
-{
-	return raw_spin_is_contended(&lock->rlock);
-}
-
-static inline int spin_can_lock(spinlock_t *lock)
-{
-	return raw_spin_can_lock(&lock->rlock);
-}
-
-#define assert_spin_locked(lock)	assert_raw_spin_locked(&(lock)->rlock)
-
-/*
- * Pull the atomic_t declaration:
- * (asm-mips/atomic.h needs above definitions)
- */
-#include <linux/atomic.h>
-/**
- * atomic_dec_and_lock - lock on reaching reference count zero
- * @atomic: the atomic counter
- * @lock: the spinlock in question
- *
- * Decrements @atomic by 1.  If the result is 0, returns true and locks
- * @lock.  Returns false for all other cases.
- */
-extern int _atomic_dec_and_lock(atomic_t *atomic, spinlock_t *lock);
-#define atomic_dec_and_lock(atomic, lock) \
-		__cond_lock(lock, _atomic_dec_and_lock(atomic, lock))
-
-#endif /* __LINUX_SPINLOCK_H */
diff --git a/ANDROID_3.4.5/include/linux/spinlock_api_smp.h b/ANDROID_3.4.5/include/linux/spinlock_api_smp.h
deleted file mode 100644
index 51df117a..00000000
--- a/ANDROID_3.4.5/include/linux/spinlock_api_smp.h
+++ /dev/null
@@ -1,196 +0,0 @@
-#ifndef __LINUX_SPINLOCK_API_SMP_H
-#define __LINUX_SPINLOCK_API_SMP_H
-
-#ifndef __LINUX_SPINLOCK_H
-# error "please don't include this file directly"
-#endif
-
-/*
- * include/linux/spinlock_api_smp.h
- *
- * spinlock API declarations on SMP (and debug)
- * (implemented in kernel/spinlock.c)
- *
- * portions Copyright 2005, Red Hat, Inc., Ingo Molnar
- * Released under the General Public License (GPL).
- */
-
-int in_lock_functions(unsigned long addr);
-
-#define assert_raw_spin_locked(x)	BUG_ON(!raw_spin_is_locked(x))
-
-void __lockfunc _raw_spin_lock(raw_spinlock_t *lock)		__acquires(lock);
-void __lockfunc _raw_spin_lock_nested(raw_spinlock_t *lock, int subclass)
-								__acquires(lock);
-void __lockfunc
-_raw_spin_lock_nest_lock(raw_spinlock_t *lock, struct lockdep_map *map)
-								__acquires(lock);
-void __lockfunc _raw_spin_lock_bh(raw_spinlock_t *lock)		__acquires(lock);
-void __lockfunc _raw_spin_lock_irq(raw_spinlock_t *lock)
-								__acquires(lock);
-
-unsigned long __lockfunc _raw_spin_lock_irqsave(raw_spinlock_t *lock)
-								__acquires(lock);
-unsigned long __lockfunc
-_raw_spin_lock_irqsave_nested(raw_spinlock_t *lock, int subclass)
-								__acquires(lock);
-int __lockfunc _raw_spin_trylock(raw_spinlock_t *lock);
-int __lockfunc _raw_spin_trylock_bh(raw_spinlock_t *lock);
-void __lockfunc _raw_spin_unlock(raw_spinlock_t *lock)		__releases(lock);
-void __lockfunc _raw_spin_unlock_bh(raw_spinlock_t *lock)	__releases(lock);
-void __lockfunc _raw_spin_unlock_irq(raw_spinlock_t *lock)	__releases(lock);
-void __lockfunc
-_raw_spin_unlock_irqrestore(raw_spinlock_t *lock, unsigned long flags)
-								__releases(lock);
-
-#ifdef CONFIG_INLINE_SPIN_LOCK
-#define _raw_spin_lock(lock) __raw_spin_lock(lock)
-#endif
-
-#ifdef CONFIG_INLINE_SPIN_LOCK_BH
-#define _raw_spin_lock_bh(lock) __raw_spin_lock_bh(lock)
-#endif
-
-#ifdef CONFIG_INLINE_SPIN_LOCK_IRQ
-#define _raw_spin_lock_irq(lock) __raw_spin_lock_irq(lock)
-#endif
-
-#ifdef CONFIG_INLINE_SPIN_LOCK_IRQSAVE
-#define _raw_spin_lock_irqsave(lock) __raw_spin_lock_irqsave(lock)
-#endif
-
-#ifdef CONFIG_INLINE_SPIN_TRYLOCK
-#define _raw_spin_trylock(lock) __raw_spin_trylock(lock)
-#endif
-
-#ifdef CONFIG_INLINE_SPIN_TRYLOCK_BH
-#define _raw_spin_trylock_bh(lock) __raw_spin_trylock_bh(lock)
-#endif
-
-#ifndef CONFIG_UNINLINE_SPIN_UNLOCK
-#define _raw_spin_unlock(lock) __raw_spin_unlock(lock)
-#endif
-
-#ifdef CONFIG_INLINE_SPIN_UNLOCK_BH
-#define _raw_spin_unlock_bh(lock) __raw_spin_unlock_bh(lock)
-#endif
-
-#ifdef CONFIG_INLINE_SPIN_UNLOCK_IRQ
-#define _raw_spin_unlock_irq(lock) __raw_spin_unlock_irq(lock)
-#endif
-
-#ifdef CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE
-#define _raw_spin_unlock_irqrestore(lock, flags) __raw_spin_unlock_irqrestore(lock, flags)
-#endif
-
-static inline int __raw_spin_trylock(raw_spinlock_t *lock)
-{
-	preempt_disable();
-	if (do_raw_spin_trylock(lock)) {
-		spin_acquire(&lock->dep_map, 0, 1, _RET_IP_);
-		return 1;
-	}
-	preempt_enable();
-	return 0;
-}
-
-/*
- * If lockdep is enabled then we use the non-preemption spin-ops
- * even on CONFIG_PREEMPT, because lockdep assumes that interrupts are
- * not re-enabled during lock-acquire (which the preempt-spin-ops do):
- */
-#if !defined(CONFIG_GENERIC_LOCKBREAK) || defined(CONFIG_DEBUG_LOCK_ALLOC)
-
-static inline unsigned long __raw_spin_lock_irqsave(raw_spinlock_t *lock)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-	preempt_disable();
-	spin_acquire(&lock->dep_map, 0, 0, _RET_IP_);
-	/*
-	 * On lockdep we dont want the hand-coded irq-enable of
-	 * do_raw_spin_lock_flags() code, because lockdep assumes
-	 * that interrupts are not re-enabled during lock-acquire:
-	 */
-#ifdef CONFIG_LOCKDEP
-	LOCK_CONTENDED(lock, do_raw_spin_trylock, do_raw_spin_lock);
-#else
-	do_raw_spin_lock_flags(lock, &flags);
-#endif
-	return flags;
-}
-
-static inline void __raw_spin_lock_irq(raw_spinlock_t *lock)
-{
-	local_irq_disable();
-	preempt_disable();
-	spin_acquire(&lock->dep_map, 0, 0, _RET_IP_);
-	LOCK_CONTENDED(lock, do_raw_spin_trylock, do_raw_spin_lock);
-}
-
-static inline void __raw_spin_lock_bh(raw_spinlock_t *lock)
-{
-	local_bh_disable();
-	preempt_disable();
-	spin_acquire(&lock->dep_map, 0, 0, _RET_IP_);
-	LOCK_CONTENDED(lock, do_raw_spin_trylock, do_raw_spin_lock);
-}
-
-static inline void __raw_spin_lock(raw_spinlock_t *lock)
-{
-	preempt_disable();
-	spin_acquire(&lock->dep_map, 0, 0, _RET_IP_);
-	LOCK_CONTENDED(lock, do_raw_spin_trylock, do_raw_spin_lock);
-}
-
-#endif /* CONFIG_PREEMPT */
-
-static inline void __raw_spin_unlock(raw_spinlock_t *lock)
-{
-	spin_release(&lock->dep_map, 1, _RET_IP_);
-	do_raw_spin_unlock(lock);
-	preempt_enable();
-}
-
-static inline void __raw_spin_unlock_irqrestore(raw_spinlock_t *lock,
-					    unsigned long flags)
-{
-	spin_release(&lock->dep_map, 1, _RET_IP_);
-	do_raw_spin_unlock(lock);
-	local_irq_restore(flags);
-	preempt_enable();
-}
-
-static inline void __raw_spin_unlock_irq(raw_spinlock_t *lock)
-{
-	spin_release(&lock->dep_map, 1, _RET_IP_);
-	do_raw_spin_unlock(lock);
-	local_irq_enable();
-	preempt_enable();
-}
-
-static inline void __raw_spin_unlock_bh(raw_spinlock_t *lock)
-{
-	spin_release(&lock->dep_map, 1, _RET_IP_);
-	do_raw_spin_unlock(lock);
-	preempt_enable_no_resched();
-	local_bh_enable_ip((unsigned long)__builtin_return_address(0));
-}
-
-static inline int __raw_spin_trylock_bh(raw_spinlock_t *lock)
-{
-	local_bh_disable();
-	preempt_disable();
-	if (do_raw_spin_trylock(lock)) {
-		spin_acquire(&lock->dep_map, 0, 1, _RET_IP_);
-		return 1;
-	}
-	preempt_enable_no_resched();
-	local_bh_enable_ip((unsigned long)__builtin_return_address(0));
-	return 0;
-}
-
-#include <linux/rwlock_api_smp.h>
-
-#endif /* __LINUX_SPINLOCK_API_SMP_H */
diff --git a/ANDROID_3.4.5/include/linux/spinlock_api_up.h b/ANDROID_3.4.5/include/linux/spinlock_api_up.h
deleted file mode 100644
index af1f4722..00000000
--- a/ANDROID_3.4.5/include/linux/spinlock_api_up.h
+++ /dev/null
@@ -1,85 +0,0 @@
-#ifndef __LINUX_SPINLOCK_API_UP_H
-#define __LINUX_SPINLOCK_API_UP_H
-
-#ifndef __LINUX_SPINLOCK_H
-# error "please don't include this file directly"
-#endif
-
-/*
- * include/linux/spinlock_api_up.h
- *
- * spinlock API implementation on UP-nondebug (inlined implementation)
- *
- * portions Copyright 2005, Red Hat, Inc., Ingo Molnar
- * Released under the General Public License (GPL).
- */
-
-#define in_lock_functions(ADDR)		0
-
-#define assert_raw_spin_locked(lock)	do { (void)(lock); } while (0)
-
-/*
- * In the UP-nondebug case there's no real locking going on, so the
- * only thing we have to do is to keep the preempt counts and irq
- * flags straight, to suppress compiler warnings of unused lock
- * variables, and to add the proper checker annotations:
- */
-#define __LOCK(lock) \
-  do { preempt_disable(); __acquire(lock); (void)(lock); } while (0)
-
-#define __LOCK_BH(lock) \
-  do { local_bh_disable(); __LOCK(lock); } while (0)
-
-#define __LOCK_IRQ(lock) \
-  do { local_irq_disable(); __LOCK(lock); } while (0)
-
-#define __LOCK_IRQSAVE(lock, flags) \
-  do { local_irq_save(flags); __LOCK(lock); } while (0)
-
-#define __UNLOCK(lock) \
-  do { preempt_enable(); __release(lock); (void)(lock); } while (0)
-
-#define __UNLOCK_BH(lock) \
-  do { preempt_enable_no_resched(); local_bh_enable(); \
-	  __release(lock); (void)(lock); } while (0)
-
-#define __UNLOCK_IRQ(lock) \
-  do { local_irq_enable(); __UNLOCK(lock); } while (0)
-
-#define __UNLOCK_IRQRESTORE(lock, flags) \
-  do { local_irq_restore(flags); __UNLOCK(lock); } while (0)
-
-#define _raw_spin_lock(lock)			__LOCK(lock)
-#define _raw_spin_lock_nested(lock, subclass)	__LOCK(lock)
-#define _raw_read_lock(lock)			__LOCK(lock)
-#define _raw_write_lock(lock)			__LOCK(lock)
-#define _raw_spin_lock_bh(lock)			__LOCK_BH(lock)
-#define _raw_read_lock_bh(lock)			__LOCK_BH(lock)
-#define _raw_write_lock_bh(lock)		__LOCK_BH(lock)
-#define _raw_spin_lock_irq(lock)		__LOCK_IRQ(lock)
-#define _raw_read_lock_irq(lock)		__LOCK_IRQ(lock)
-#define _raw_write_lock_irq(lock)		__LOCK_IRQ(lock)
-#define _raw_spin_lock_irqsave(lock, flags)	__LOCK_IRQSAVE(lock, flags)
-#define _raw_read_lock_irqsave(lock, flags)	__LOCK_IRQSAVE(lock, flags)
-#define _raw_write_lock_irqsave(lock, flags)	__LOCK_IRQSAVE(lock, flags)
-#define _raw_spin_trylock(lock)			({ __LOCK(lock); 1; })
-#define _raw_read_trylock(lock)			({ __LOCK(lock); 1; })
-#define _raw_write_trylock(lock)			({ __LOCK(lock); 1; })
-#define _raw_spin_trylock_bh(lock)		({ __LOCK_BH(lock); 1; })
-#define _raw_spin_unlock(lock)			__UNLOCK(lock)
-#define _raw_read_unlock(lock)			__UNLOCK(lock)
-#define _raw_write_unlock(lock)			__UNLOCK(lock)
-#define _raw_spin_unlock_bh(lock)		__UNLOCK_BH(lock)
-#define _raw_write_unlock_bh(lock)		__UNLOCK_BH(lock)
-#define _raw_read_unlock_bh(lock)		__UNLOCK_BH(lock)
-#define _raw_spin_unlock_irq(lock)		__UNLOCK_IRQ(lock)
-#define _raw_read_unlock_irq(lock)		__UNLOCK_IRQ(lock)
-#define _raw_write_unlock_irq(lock)		__UNLOCK_IRQ(lock)
-#define _raw_spin_unlock_irqrestore(lock, flags) \
-					__UNLOCK_IRQRESTORE(lock, flags)
-#define _raw_read_unlock_irqrestore(lock, flags) \
-					__UNLOCK_IRQRESTORE(lock, flags)
-#define _raw_write_unlock_irqrestore(lock, flags) \
-					__UNLOCK_IRQRESTORE(lock, flags)
-
-#endif /* __LINUX_SPINLOCK_API_UP_H */
diff --git a/ANDROID_3.4.5/include/linux/spinlock_types.h b/ANDROID_3.4.5/include/linux/spinlock_types.h
deleted file mode 100644
index 73548eb1..00000000
--- a/ANDROID_3.4.5/include/linux/spinlock_types.h
+++ /dev/null
@@ -1,88 +0,0 @@
-#ifndef __LINUX_SPINLOCK_TYPES_H
-#define __LINUX_SPINLOCK_TYPES_H
-
-/*
- * include/linux/spinlock_types.h - generic spinlock type definitions
- *                                  and initializers
- *
- * portions Copyright 2005, Red Hat, Inc., Ingo Molnar
- * Released under the General Public License (GPL).
- */
-
-#if defined(CONFIG_SMP)
-# include <asm/spinlock_types.h>
-#else
-# include <linux/spinlock_types_up.h>
-#endif
-
-#include <linux/lockdep.h>
-
-typedef struct raw_spinlock {
-	arch_spinlock_t raw_lock;
-#ifdef CONFIG_GENERIC_LOCKBREAK
-	unsigned int break_lock;
-#endif
-#ifdef CONFIG_DEBUG_SPINLOCK
-	unsigned int magic, owner_cpu;
-	void *owner;
-#endif
-#ifdef CONFIG_DEBUG_LOCK_ALLOC
-	struct lockdep_map dep_map;
-#endif
-} raw_spinlock_t;
-
-#define SPINLOCK_MAGIC		0xdead4ead
-
-#define SPINLOCK_OWNER_INIT	((void *)-1L)
-
-#ifdef CONFIG_DEBUG_LOCK_ALLOC
-# define SPIN_DEP_MAP_INIT(lockname)	.dep_map = { .name = #lockname }
-#else
-# define SPIN_DEP_MAP_INIT(lockname)
-#endif
-
-#ifdef CONFIG_DEBUG_SPINLOCK
-# define SPIN_DEBUG_INIT(lockname)		\
-	.magic = SPINLOCK_MAGIC,		\
-	.owner_cpu = -1,			\
-	.owner = SPINLOCK_OWNER_INIT,
-#else
-# define SPIN_DEBUG_INIT(lockname)
-#endif
-
-#define __RAW_SPIN_LOCK_INITIALIZER(lockname)	\
-	{					\
-	.raw_lock = __ARCH_SPIN_LOCK_UNLOCKED,	\
-	SPIN_DEBUG_INIT(lockname)		\
-	SPIN_DEP_MAP_INIT(lockname) }
-
-#define __RAW_SPIN_LOCK_UNLOCKED(lockname)	\
-	(raw_spinlock_t) __RAW_SPIN_LOCK_INITIALIZER(lockname)
-
-#define DEFINE_RAW_SPINLOCK(x)	raw_spinlock_t x = __RAW_SPIN_LOCK_UNLOCKED(x)
-
-typedef struct spinlock {
-	union {
-		struct raw_spinlock rlock;
-
-#ifdef CONFIG_DEBUG_LOCK_ALLOC
-# define LOCK_PADSIZE (offsetof(struct raw_spinlock, dep_map))
-		struct {
-			u8 __padding[LOCK_PADSIZE];
-			struct lockdep_map dep_map;
-		};
-#endif
-	};
-} spinlock_t;
-
-#define __SPIN_LOCK_INITIALIZER(lockname) \
-	{ { .rlock = __RAW_SPIN_LOCK_INITIALIZER(lockname) } }
-
-#define __SPIN_LOCK_UNLOCKED(lockname) \
-	(spinlock_t ) __SPIN_LOCK_INITIALIZER(lockname)
-
-#define DEFINE_SPINLOCK(x)	spinlock_t x = __SPIN_LOCK_UNLOCKED(x)
-
-#include <linux/rwlock_types.h>
-
-#endif /* __LINUX_SPINLOCK_TYPES_H */
diff --git a/ANDROID_3.4.5/include/linux/spinlock_types_up.h b/ANDROID_3.4.5/include/linux/spinlock_types_up.h
deleted file mode 100644
index c09b6407..00000000
--- a/ANDROID_3.4.5/include/linux/spinlock_types_up.h
+++ /dev/null
@@ -1,37 +0,0 @@
-#ifndef __LINUX_SPINLOCK_TYPES_UP_H
-#define __LINUX_SPINLOCK_TYPES_UP_H
-
-#ifndef __LINUX_SPINLOCK_TYPES_H
-# error "please don't include this file directly"
-#endif
-
-/*
- * include/linux/spinlock_types_up.h - spinlock type definitions for UP
- *
- * portions Copyright 2005, Red Hat, Inc., Ingo Molnar
- * Released under the General Public License (GPL).
- */
-
-#ifdef CONFIG_DEBUG_SPINLOCK
-
-typedef struct {
-	volatile unsigned int slock;
-} arch_spinlock_t;
-
-#define __ARCH_SPIN_LOCK_UNLOCKED { 1 }
-
-#else
-
-typedef struct { } arch_spinlock_t;
-
-#define __ARCH_SPIN_LOCK_UNLOCKED { }
-
-#endif
-
-typedef struct {
-	/* no debug version on UP */
-} arch_rwlock_t;
-
-#define __ARCH_RW_LOCK_UNLOCKED { }
-
-#endif /* __LINUX_SPINLOCK_TYPES_UP_H */
diff --git a/ANDROID_3.4.5/include/linux/spinlock_up.h b/ANDROID_3.4.5/include/linux/spinlock_up.h
deleted file mode 100644
index a26e2fb6..00000000
--- a/ANDROID_3.4.5/include/linux/spinlock_up.h
+++ /dev/null
@@ -1,78 +0,0 @@
-#ifndef __LINUX_SPINLOCK_UP_H
-#define __LINUX_SPINLOCK_UP_H
-
-#ifndef __LINUX_SPINLOCK_H
-# error "please don't include this file directly"
-#endif
-
-#include <asm/processor.h>	/* for cpu_relax() */
-
-/*
- * include/linux/spinlock_up.h - UP-debug version of spinlocks.
- *
- * portions Copyright 2005, Red Hat, Inc., Ingo Molnar
- * Released under the General Public License (GPL).
- *
- * In the debug case, 1 means unlocked, 0 means locked. (the values
- * are inverted, to catch initialization bugs)
- *
- * No atomicity anywhere, we are on UP.
- */
-
-#ifdef CONFIG_DEBUG_SPINLOCK
-#define arch_spin_is_locked(x)		((x)->slock == 0)
-
-static inline void arch_spin_lock(arch_spinlock_t *lock)
-{
-	lock->slock = 0;
-}
-
-static inline void
-arch_spin_lock_flags(arch_spinlock_t *lock, unsigned long flags)
-{
-	local_irq_save(flags);
-	lock->slock = 0;
-}
-
-static inline int arch_spin_trylock(arch_spinlock_t *lock)
-{
-	char oldval = lock->slock;
-
-	lock->slock = 0;
-
-	return oldval > 0;
-}
-
-static inline void arch_spin_unlock(arch_spinlock_t *lock)
-{
-	lock->slock = 1;
-}
-
-/*
- * Read-write spinlocks. No debug version.
- */
-#define arch_read_lock(lock)		do { (void)(lock); } while (0)
-#define arch_write_lock(lock)		do { (void)(lock); } while (0)
-#define arch_read_trylock(lock)	({ (void)(lock); 1; })
-#define arch_write_trylock(lock)	({ (void)(lock); 1; })
-#define arch_read_unlock(lock)		do { (void)(lock); } while (0)
-#define arch_write_unlock(lock)	do { (void)(lock); } while (0)
-
-#else /* DEBUG_SPINLOCK */
-#define arch_spin_is_locked(lock)	((void)(lock), 0)
-/* for sched.c and kernel_lock.c: */
-# define arch_spin_lock(lock)		do { (void)(lock); } while (0)
-# define arch_spin_lock_flags(lock, flags)	do { (void)(lock); } while (0)
-# define arch_spin_unlock(lock)	do { (void)(lock); } while (0)
-# define arch_spin_trylock(lock)	({ (void)(lock); 1; })
-#endif /* DEBUG_SPINLOCK */
-
-#define arch_spin_is_contended(lock)	(((void)(lock), 0))
-
-#define arch_read_can_lock(lock)	(((void)(lock), 1))
-#define arch_write_can_lock(lock)	(((void)(lock), 1))
-
-#define arch_spin_unlock_wait(lock) \
-		do { cpu_relax(); } while (arch_spin_is_locked(lock))
-
-#endif /* __LINUX_SPINLOCK_UP_H */
diff --git a/ANDROID_3.4.5/include/linux/splice.h b/ANDROID_3.4.5/include/linux/splice.h
deleted file mode 100644
index 09a545a7..00000000
--- a/ANDROID_3.4.5/include/linux/splice.h
+++ /dev/null
@@ -1,94 +0,0 @@
-/*
- * Function declerations and data structures related to the splice
- * implementation.
- *
- * Copyright (C) 2007 Jens Axboe <jens.axboe@oracle.com>
- *
- */
-#ifndef SPLICE_H
-#define SPLICE_H
-
-#include <linux/pipe_fs_i.h>
-
-/*
- * Flags passed in from splice/tee/vmsplice
- */
-#define SPLICE_F_MOVE	(0x01)	/* move pages instead of copying */
-#define SPLICE_F_NONBLOCK (0x02) /* don't block on the pipe splicing (but */
-				 /* we may still block on the fd we splice */
-				 /* from/to, of course */
-#define SPLICE_F_MORE	(0x04)	/* expect more data */
-#define SPLICE_F_GIFT	(0x08)	/* pages passed in are a gift */
-
-/*
- * Passed to the actors
- */
-struct splice_desc {
-	unsigned int len, total_len;	/* current and remaining length */
-	unsigned int flags;		/* splice flags */
-	/*
-	 * actor() private data
-	 */
-	union {
-		void __user *userptr;	/* memory to write to */
-		struct file *file;	/* file to read/write */
-		void *data;		/* cookie */
-	} u;
-	loff_t pos;			/* file position */
-	size_t num_spliced;		/* number of bytes already spliced */
-	bool need_wakeup;		/* need to wake up writer */
-};
-
-struct partial_page {
-	unsigned int offset;
-	unsigned int len;
-	unsigned long private;
-};
-
-/*
- * Passed to splice_to_pipe
- */
-struct splice_pipe_desc {
-	struct page **pages;		/* page map */
-	struct partial_page *partial;	/* pages[] may not be contig */
-	int nr_pages;			/* number of populated pages in map */
-	unsigned int nr_pages_max;	/* pages[] & partial[] arrays size */
-	unsigned int flags;		/* splice flags */
-	const struct pipe_buf_operations *ops;/* ops associated with output pipe */
-	void (*spd_release)(struct splice_pipe_desc *, unsigned int);
-};
-
-typedef int (splice_actor)(struct pipe_inode_info *, struct pipe_buffer *,
-			   struct splice_desc *);
-typedef int (splice_direct_actor)(struct pipe_inode_info *,
-				  struct splice_desc *);
-
-extern ssize_t splice_from_pipe(struct pipe_inode_info *, struct file *,
-				loff_t *, size_t, unsigned int,
-				splice_actor *);
-extern ssize_t __splice_from_pipe(struct pipe_inode_info *,
-				  struct splice_desc *, splice_actor *);
-extern int splice_from_pipe_feed(struct pipe_inode_info *, struct splice_desc *,
-				 splice_actor *);
-extern int splice_from_pipe_next(struct pipe_inode_info *,
-				 struct splice_desc *);
-extern void splice_from_pipe_begin(struct splice_desc *);
-extern void splice_from_pipe_end(struct pipe_inode_info *,
-				 struct splice_desc *);
-extern int pipe_to_file(struct pipe_inode_info *, struct pipe_buffer *,
-			struct splice_desc *);
-
-extern ssize_t splice_to_pipe(struct pipe_inode_info *,
-			      struct splice_pipe_desc *);
-extern ssize_t splice_direct_to_actor(struct file *, struct splice_desc *,
-				      splice_direct_actor *);
-
-/*
- * for dynamic pipe sizing
- */
-extern int splice_grow_spd(const struct pipe_inode_info *, struct splice_pipe_desc *);
-extern void splice_shrink_spd(struct splice_pipe_desc *);
-extern void spd_release_page(struct splice_pipe_desc *, unsigned int);
-
-extern const struct pipe_buf_operations page_cache_pipe_buf_ops;
-#endif
diff --git a/ANDROID_3.4.5/include/linux/srcu.h b/ANDROID_3.4.5/include/linux/srcu.h
deleted file mode 100644
index d3d5fa54..00000000
--- a/ANDROID_3.4.5/include/linux/srcu.h
+++ /dev/null
@@ -1,239 +0,0 @@
-/*
- * Sleepable Read-Copy Update mechanism for mutual exclusion
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- *
- * Copyright (C) IBM Corporation, 2006
- *
- * Author: Paul McKenney <paulmck@us.ibm.com>
- *
- * For detailed explanation of Read-Copy Update mechanism see -
- * 		Documentation/RCU/ *.txt
- *
- */
-
-#ifndef _LINUX_SRCU_H
-#define _LINUX_SRCU_H
-
-#include <linux/mutex.h>
-#include <linux/rcupdate.h>
-
-struct srcu_struct_array {
-	int c[2];
-};
-
-struct srcu_struct {
-	int completed;
-	struct srcu_struct_array __percpu *per_cpu_ref;
-	struct mutex mutex;
-#ifdef CONFIG_DEBUG_LOCK_ALLOC
-	struct lockdep_map dep_map;
-#endif /* #ifdef CONFIG_DEBUG_LOCK_ALLOC */
-};
-
-#ifndef CONFIG_PREEMPT
-#define srcu_barrier() barrier()
-#else /* #ifndef CONFIG_PREEMPT */
-#define srcu_barrier()
-#endif /* #else #ifndef CONFIG_PREEMPT */
-
-#ifdef CONFIG_DEBUG_LOCK_ALLOC
-
-int __init_srcu_struct(struct srcu_struct *sp, const char *name,
-		       struct lock_class_key *key);
-
-#define init_srcu_struct(sp) \
-({ \
-	static struct lock_class_key __srcu_key; \
-	\
-	__init_srcu_struct((sp), #sp, &__srcu_key); \
-})
-
-#else /* #ifdef CONFIG_DEBUG_LOCK_ALLOC */
-
-int init_srcu_struct(struct srcu_struct *sp);
-
-#endif /* #else #ifdef CONFIG_DEBUG_LOCK_ALLOC */
-
-void cleanup_srcu_struct(struct srcu_struct *sp);
-int __srcu_read_lock(struct srcu_struct *sp) __acquires(sp);
-void __srcu_read_unlock(struct srcu_struct *sp, int idx) __releases(sp);
-void synchronize_srcu(struct srcu_struct *sp);
-void synchronize_srcu_expedited(struct srcu_struct *sp);
-long srcu_batches_completed(struct srcu_struct *sp);
-
-#ifdef CONFIG_DEBUG_LOCK_ALLOC
-
-/**
- * srcu_read_lock_held - might we be in SRCU read-side critical section?
- *
- * If CONFIG_DEBUG_LOCK_ALLOC is selected, returns nonzero iff in an SRCU
- * read-side critical section.  In absence of CONFIG_DEBUG_LOCK_ALLOC,
- * this assumes we are in an SRCU read-side critical section unless it can
- * prove otherwise.
- *
- * Checks debug_lockdep_rcu_enabled() to prevent false positives during boot
- * and while lockdep is disabled.
- *
- * Note that if the CPU is in the idle loop from an RCU point of view
- * (ie: that we are in the section between rcu_idle_enter() and
- * rcu_idle_exit()) then srcu_read_lock_held() returns false even if
- * the CPU did an srcu_read_lock().  The reason for this is that RCU
- * ignores CPUs that are in such a section, considering these as in
- * extended quiescent state, so such a CPU is effectively never in an
- * RCU read-side critical section regardless of what RCU primitives it
- * invokes.  This state of affairs is required --- we need to keep an
- * RCU-free window in idle where the CPU may possibly enter into low
- * power mode. This way we can notice an extended quiescent state to
- * other CPUs that started a grace period. Otherwise we would delay any
- * grace period as long as we run in the idle task.
- *
- * Similarly, we avoid claiming an SRCU read lock held if the current
- * CPU is offline.
- */
-static inline int srcu_read_lock_held(struct srcu_struct *sp)
-{
-	if (!debug_lockdep_rcu_enabled())
-		return 1;
-	if (rcu_is_cpu_idle())
-		return 0;
-	if (!rcu_lockdep_current_cpu_online())
-		return 0;
-	return lock_is_held(&sp->dep_map);
-}
-
-#else /* #ifdef CONFIG_DEBUG_LOCK_ALLOC */
-
-static inline int srcu_read_lock_held(struct srcu_struct *sp)
-{
-	return 1;
-}
-
-#endif /* #else #ifdef CONFIG_DEBUG_LOCK_ALLOC */
-
-/**
- * srcu_dereference_check - fetch SRCU-protected pointer for later dereferencing
- * @p: the pointer to fetch and protect for later dereferencing
- * @sp: pointer to the srcu_struct, which is used to check that we
- *	really are in an SRCU read-side critical section.
- * @c: condition to check for update-side use
- *
- * If PROVE_RCU is enabled, invoking this outside of an RCU read-side
- * critical section will result in an RCU-lockdep splat, unless @c evaluates
- * to 1.  The @c argument will normally be a logical expression containing
- * lockdep_is_held() calls.
- */
-#define srcu_dereference_check(p, sp, c) \
-	__rcu_dereference_check((p), srcu_read_lock_held(sp) || (c), __rcu)
-
-/**
- * srcu_dereference - fetch SRCU-protected pointer for later dereferencing
- * @p: the pointer to fetch and protect for later dereferencing
- * @sp: pointer to the srcu_struct, which is used to check that we
- *	really are in an SRCU read-side critical section.
- *
- * Makes rcu_dereference_check() do the dirty work.  If PROVE_RCU
- * is enabled, invoking this outside of an RCU read-side critical
- * section will result in an RCU-lockdep splat.
- */
-#define srcu_dereference(p, sp) srcu_dereference_check((p), (sp), 0)
-
-/**
- * srcu_read_lock - register a new reader for an SRCU-protected structure.
- * @sp: srcu_struct in which to register the new reader.
- *
- * Enter an SRCU read-side critical section.  Note that SRCU read-side
- * critical sections may be nested.  However, it is illegal to
- * call anything that waits on an SRCU grace period for the same
- * srcu_struct, whether directly or indirectly.  Please note that
- * one way to indirectly wait on an SRCU grace period is to acquire
- * a mutex that is held elsewhere while calling synchronize_srcu() or
- * synchronize_srcu_expedited().
- *
- * Note that srcu_read_lock() and the matching srcu_read_unlock() must
- * occur in the same context, for example, it is illegal to invoke
- * srcu_read_unlock() in an irq handler if the matching srcu_read_lock()
- * was invoked in process context.
- */
-static inline int srcu_read_lock(struct srcu_struct *sp) __acquires(sp)
-{
-	int retval = __srcu_read_lock(sp);
-
-	rcu_lock_acquire(&(sp)->dep_map);
-	rcu_lockdep_assert(!rcu_is_cpu_idle(),
-			   "srcu_read_lock() used illegally while idle");
-	return retval;
-}
-
-/**
- * srcu_read_unlock - unregister a old reader from an SRCU-protected structure.
- * @sp: srcu_struct in which to unregister the old reader.
- * @idx: return value from corresponding srcu_read_lock().
- *
- * Exit an SRCU read-side critical section.
- */
-static inline void srcu_read_unlock(struct srcu_struct *sp, int idx)
-	__releases(sp)
-{
-	rcu_lockdep_assert(!rcu_is_cpu_idle(),
-			   "srcu_read_unlock() used illegally while idle");
-	rcu_lock_release(&(sp)->dep_map);
-	__srcu_read_unlock(sp, idx);
-}
-
-/**
- * srcu_read_lock_raw - register a new reader for an SRCU-protected structure.
- * @sp: srcu_struct in which to register the new reader.
- *
- * Enter an SRCU read-side critical section.  Similar to srcu_read_lock(),
- * but avoids the RCU-lockdep checking.  This means that it is legal to
- * use srcu_read_lock_raw() in one context, for example, in an exception
- * handler, and then have the matching srcu_read_unlock_raw() in another
- * context, for example in the task that took the exception.
- *
- * However, the entire SRCU read-side critical section must reside within a
- * single task.  For example, beware of using srcu_read_lock_raw() in
- * a device interrupt handler and srcu_read_unlock() in the interrupted
- * task:  This will not work if interrupts are threaded.
- */
-static inline int srcu_read_lock_raw(struct srcu_struct *sp)
-{
-	unsigned long flags;
-	int ret;
-
-	local_irq_save(flags);
-	ret =  __srcu_read_lock(sp);
-	local_irq_restore(flags);
-	return ret;
-}
-
-/**
- * srcu_read_unlock_raw - unregister reader from an SRCU-protected structure.
- * @sp: srcu_struct in which to unregister the old reader.
- * @idx: return value from corresponding srcu_read_lock_raw().
- *
- * Exit an SRCU read-side critical section without lockdep-RCU checking.
- * See srcu_read_lock_raw() for more details.
- */
-static inline void srcu_read_unlock_raw(struct srcu_struct *sp, int idx)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-	__srcu_read_unlock(sp, idx);
-	local_irq_restore(flags);
-}
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/ssb/ssb.h b/ANDROID_3.4.5/include/linux/ssb/ssb.h
deleted file mode 100644
index d2768318..00000000
--- a/ANDROID_3.4.5/include/linux/ssb/ssb.h
+++ /dev/null
@@ -1,625 +0,0 @@
-#ifndef LINUX_SSB_H_
-#define LINUX_SSB_H_
-
-#include <linux/device.h>
-#include <linux/list.h>
-#include <linux/types.h>
-#include <linux/spinlock.h>
-#include <linux/pci.h>
-#include <linux/mod_devicetable.h>
-#include <linux/dma-mapping.h>
-
-#include <linux/ssb/ssb_regs.h>
-
-
-struct pcmcia_device;
-struct ssb_bus;
-struct ssb_driver;
-
-struct ssb_sprom_core_pwr_info {
-	u8 itssi_2g, itssi_5g;
-	u8 maxpwr_2g, maxpwr_5gl, maxpwr_5g, maxpwr_5gh;
-	u16 pa_2g[4], pa_5gl[4], pa_5g[4], pa_5gh[4];
-};
-
-struct ssb_sprom {
-	u8 revision;
-	u8 il0mac[6];		/* MAC address for 802.11b/g */
-	u8 et0mac[6];		/* MAC address for Ethernet */
-	u8 et1mac[6];		/* MAC address for 802.11a */
-	u8 et0phyaddr;		/* MII address for enet0 */
-	u8 et1phyaddr;		/* MII address for enet1 */
-	u8 et0mdcport;		/* MDIO for enet0 */
-	u8 et1mdcport;		/* MDIO for enet1 */
-	u16 board_rev;		/* Board revision number from SPROM. */
-	u16 board_num;		/* Board number from SPROM. */
-	u16 board_type;		/* Board type from SPROM. */
-	u8 country_code;	/* Country Code */
-	char alpha2[2];		/* Country Code as two chars like EU or US */
-	u8 leddc_on_time;	/* LED Powersave Duty Cycle On Count */
-	u8 leddc_off_time;	/* LED Powersave Duty Cycle Off Count */
-	u8 ant_available_a;	/* 2GHz antenna available bits (up to 4) */
-	u8 ant_available_bg;	/* 5GHz antenna available bits (up to 4) */
-	u16 pa0b0;
-	u16 pa0b1;
-	u16 pa0b2;
-	u16 pa1b0;
-	u16 pa1b1;
-	u16 pa1b2;
-	u16 pa1lob0;
-	u16 pa1lob1;
-	u16 pa1lob2;
-	u16 pa1hib0;
-	u16 pa1hib1;
-	u16 pa1hib2;
-	u8 gpio0;		/* GPIO pin 0 */
-	u8 gpio1;		/* GPIO pin 1 */
-	u8 gpio2;		/* GPIO pin 2 */
-	u8 gpio3;		/* GPIO pin 3 */
-	u8 maxpwr_bg;		/* 2.4GHz Amplifier Max Power (in dBm Q5.2) */
-	u8 maxpwr_al;		/* 5.2GHz Amplifier Max Power (in dBm Q5.2) */
-	u8 maxpwr_a;		/* 5.3GHz Amplifier Max Power (in dBm Q5.2) */
-	u8 maxpwr_ah;		/* 5.8GHz Amplifier Max Power (in dBm Q5.2) */
-	u8 itssi_a;		/* Idle TSSI Target for A-PHY */
-	u8 itssi_bg;		/* Idle TSSI Target for B/G-PHY */
-	u8 tri2g;		/* 2.4GHz TX isolation */
-	u8 tri5gl;		/* 5.2GHz TX isolation */
-	u8 tri5g;		/* 5.3GHz TX isolation */
-	u8 tri5gh;		/* 5.8GHz TX isolation */
-	u8 txpid2g[4];		/* 2GHz TX power index */
-	u8 txpid5gl[4];		/* 4.9 - 5.1GHz TX power index */
-	u8 txpid5g[4];		/* 5.1 - 5.5GHz TX power index */
-	u8 txpid5gh[4];		/* 5.5 - ...GHz TX power index */
-	s8 rxpo2g;		/* 2GHz RX power offset */
-	s8 rxpo5g;		/* 5GHz RX power offset */
-	u8 rssisav2g;		/* 2GHz RSSI params */
-	u8 rssismc2g;
-	u8 rssismf2g;
-	u8 bxa2g;		/* 2GHz BX arch */
-	u8 rssisav5g;		/* 5GHz RSSI params */
-	u8 rssismc5g;
-	u8 rssismf5g;
-	u8 bxa5g;		/* 5GHz BX arch */
-	u16 cck2gpo;		/* CCK power offset */
-	u32 ofdm2gpo;		/* 2.4GHz OFDM power offset */
-	u32 ofdm5glpo;		/* 5.2GHz OFDM power offset */
-	u32 ofdm5gpo;		/* 5.3GHz OFDM power offset */
-	u32 ofdm5ghpo;		/* 5.8GHz OFDM power offset */
-	u16 boardflags_lo;	/* Board flags (bits 0-15) */
-	u16 boardflags_hi;	/* Board flags (bits 16-31) */
-	u16 boardflags2_lo;	/* Board flags (bits 32-47) */
-	u16 boardflags2_hi;	/* Board flags (bits 48-63) */
-	/* TODO store board flags in a single u64 */
-
-	struct ssb_sprom_core_pwr_info core_pwr_info[4];
-
-	/* Antenna gain values for up to 4 antennas
-	 * on each band. Values in dBm/4 (Q5.2). Negative gain means the
-	 * loss in the connectors is bigger than the gain. */
-	struct {
-		s8 a0, a1, a2, a3;
-	} antenna_gain;
-
-	struct {
-		struct {
-			u8 tssipos, extpa_gain, pdet_range, tr_iso, antswlut;
-		} ghz2;
-		struct {
-			u8 tssipos, extpa_gain, pdet_range, tr_iso, antswlut;
-		} ghz5;
-	} fem;
-
-	u16 mcs2gpo[8];
-	u16 mcs5gpo[8];
-	u16 mcs5glpo[8];
-	u16 mcs5ghpo[8];
-	u8 opo;
-
-	u8 rxgainerr2ga[3];
-	u8 rxgainerr5gla[3];
-	u8 rxgainerr5gma[3];
-	u8 rxgainerr5gha[3];
-	u8 rxgainerr5gua[3];
-
-	u8 noiselvl2ga[3];
-	u8 noiselvl5gla[3];
-	u8 noiselvl5gma[3];
-	u8 noiselvl5gha[3];
-	u8 noiselvl5gua[3];
-
-	u8 regrev;
-	u8 txchain;
-	u8 rxchain;
-	u8 antswitch;
-	u16 cddpo;
-	u16 stbcpo;
-	u16 bw40po;
-	u16 bwduppo;
-
-	u8 tempthresh;
-	u8 tempoffset;
-	u16 rawtempsense;
-	u8 measpower;
-	u8 tempsense_slope;
-	u8 tempcorrx;
-	u8 tempsense_option;
-	u8 freqoffset_corr;
-	u8 iqcal_swp_dis;
-	u8 hw_iqcal_en;
-	u8 elna2g;
-	u8 elna5g;
-	u8 phycal_tempdelta;
-	u8 temps_period;
-	u8 temps_hysteresis;
-	u8 measpower1;
-	u8 measpower2;
-	u8 pcieingress_war;
-
-	/* power per rate from sromrev 9 */
-	u16 cckbw202gpo;
-	u16 cckbw20ul2gpo;
-	u32 legofdmbw202gpo;
-	u32 legofdmbw20ul2gpo;
-	u32 legofdmbw205glpo;
-	u32 legofdmbw20ul5glpo;
-	u32 legofdmbw205gmpo;
-	u32 legofdmbw20ul5gmpo;
-	u32 legofdmbw205ghpo;
-	u32 legofdmbw20ul5ghpo;
-	u32 mcsbw202gpo;
-	u32 mcsbw20ul2gpo;
-	u32 mcsbw402gpo;
-	u32 mcsbw205glpo;
-	u32 mcsbw20ul5glpo;
-	u32 mcsbw405glpo;
-	u32 mcsbw205gmpo;
-	u32 mcsbw20ul5gmpo;
-	u32 mcsbw405gmpo;
-	u32 mcsbw205ghpo;
-	u32 mcsbw20ul5ghpo;
-	u32 mcsbw405ghpo;
-	u16 mcs32po;
-	u16 legofdm40duppo;
-	u8 sar2g;
-	u8 sar5g;
-};
-
-/* Information about the PCB the circuitry is soldered on. */
-struct ssb_boardinfo {
-	u16 vendor;
-	u16 type;
-	u8  rev;
-};
-
-
-struct ssb_device;
-/* Lowlevel read/write operations on the device MMIO.
- * Internal, don't use that outside of ssb. */
-struct ssb_bus_ops {
-	u8 (*read8)(struct ssb_device *dev, u16 offset);
-	u16 (*read16)(struct ssb_device *dev, u16 offset);
-	u32 (*read32)(struct ssb_device *dev, u16 offset);
-	void (*write8)(struct ssb_device *dev, u16 offset, u8 value);
-	void (*write16)(struct ssb_device *dev, u16 offset, u16 value);
-	void (*write32)(struct ssb_device *dev, u16 offset, u32 value);
-#ifdef CONFIG_SSB_BLOCKIO
-	void (*block_read)(struct ssb_device *dev, void *buffer,
-			   size_t count, u16 offset, u8 reg_width);
-	void (*block_write)(struct ssb_device *dev, const void *buffer,
-			    size_t count, u16 offset, u8 reg_width);
-#endif
-};
-
-
-/* Core-ID values. */
-#define SSB_DEV_CHIPCOMMON	0x800
-#define SSB_DEV_ILINE20		0x801
-#define SSB_DEV_SDRAM		0x803
-#define SSB_DEV_PCI		0x804
-#define SSB_DEV_MIPS		0x805
-#define SSB_DEV_ETHERNET	0x806
-#define SSB_DEV_V90		0x807
-#define SSB_DEV_USB11_HOSTDEV	0x808
-#define SSB_DEV_ADSL		0x809
-#define SSB_DEV_ILINE100	0x80A
-#define SSB_DEV_IPSEC		0x80B
-#define SSB_DEV_PCMCIA		0x80D
-#define SSB_DEV_INTERNAL_MEM	0x80E
-#define SSB_DEV_MEMC_SDRAM	0x80F
-#define SSB_DEV_EXTIF		0x811
-#define SSB_DEV_80211		0x812
-#define SSB_DEV_MIPS_3302	0x816
-#define SSB_DEV_USB11_HOST	0x817
-#define SSB_DEV_USB11_DEV	0x818
-#define SSB_DEV_USB20_HOST	0x819
-#define SSB_DEV_USB20_DEV	0x81A
-#define SSB_DEV_SDIO_HOST	0x81B
-#define SSB_DEV_ROBOSWITCH	0x81C
-#define SSB_DEV_PARA_ATA	0x81D
-#define SSB_DEV_SATA_XORDMA	0x81E
-#define SSB_DEV_ETHERNET_GBIT	0x81F
-#define SSB_DEV_PCIE		0x820
-#define SSB_DEV_MIMO_PHY	0x821
-#define SSB_DEV_SRAM_CTRLR	0x822
-#define SSB_DEV_MINI_MACPHY	0x823
-#define SSB_DEV_ARM_1176	0x824
-#define SSB_DEV_ARM_7TDMI	0x825
-
-/* Vendor-ID values */
-#define SSB_VENDOR_BROADCOM	0x4243
-
-/* Some kernel subsystems poke with dev->drvdata, so we must use the
- * following ugly workaround to get from struct device to struct ssb_device */
-struct __ssb_dev_wrapper {
-	struct device dev;
-	struct ssb_device *sdev;
-};
-
-struct ssb_device {
-	/* Having a copy of the ops pointer in each dev struct
-	 * is an optimization. */
-	const struct ssb_bus_ops *ops;
-
-	struct device *dev, *dma_dev;
-
-	struct ssb_bus *bus;
-	struct ssb_device_id id;
-
-	u8 core_index;
-	unsigned int irq;
-
-	/* Internal-only stuff follows. */
-	void *drvdata;		/* Per-device data */
-	void *devtypedata;	/* Per-devicetype (eg 802.11) data */
-};
-
-/* Go from struct device to struct ssb_device. */
-static inline
-struct ssb_device * dev_to_ssb_dev(struct device *dev)
-{
-	struct __ssb_dev_wrapper *wrap;
-	wrap = container_of(dev, struct __ssb_dev_wrapper, dev);
-	return wrap->sdev;
-}
-
-/* Device specific user data */
-static inline
-void ssb_set_drvdata(struct ssb_device *dev, void *data)
-{
-	dev->drvdata = data;
-}
-static inline
-void * ssb_get_drvdata(struct ssb_device *dev)
-{
-	return dev->drvdata;
-}
-
-/* Devicetype specific user data. This is per device-type (not per device) */
-void ssb_set_devtypedata(struct ssb_device *dev, void *data);
-static inline
-void * ssb_get_devtypedata(struct ssb_device *dev)
-{
-	return dev->devtypedata;
-}
-
-
-struct ssb_driver {
-	const char *name;
-	const struct ssb_device_id *id_table;
-
-	int (*probe)(struct ssb_device *dev, const struct ssb_device_id *id);
-	void (*remove)(struct ssb_device *dev);
-	int (*suspend)(struct ssb_device *dev, pm_message_t state);
-	int (*resume)(struct ssb_device *dev);
-	void (*shutdown)(struct ssb_device *dev);
-
-	struct device_driver drv;
-};
-#define drv_to_ssb_drv(_drv) container_of(_drv, struct ssb_driver, drv)
-
-extern int __ssb_driver_register(struct ssb_driver *drv, struct module *owner);
-#define ssb_driver_register(drv) \
-	__ssb_driver_register(drv, THIS_MODULE)
-
-extern void ssb_driver_unregister(struct ssb_driver *drv);
-
-
-
-
-enum ssb_bustype {
-	SSB_BUSTYPE_SSB,	/* This SSB bus is the system bus */
-	SSB_BUSTYPE_PCI,	/* SSB is connected to PCI bus */
-	SSB_BUSTYPE_PCMCIA,	/* SSB is connected to PCMCIA bus */
-	SSB_BUSTYPE_SDIO,	/* SSB is connected to SDIO bus */
-};
-
-/* board_vendor */
-#define SSB_BOARDVENDOR_BCM	0x14E4	/* Broadcom */
-#define SSB_BOARDVENDOR_DELL	0x1028	/* Dell */
-#define SSB_BOARDVENDOR_HP	0x0E11	/* HP */
-/* board_type */
-#define SSB_BOARD_BCM94306MP	0x0418
-#define SSB_BOARD_BCM4309G	0x0421
-#define SSB_BOARD_BCM4306CB	0x0417
-#define SSB_BOARD_BCM4309MP	0x040C
-#define SSB_BOARD_MP4318	0x044A
-#define SSB_BOARD_BU4306	0x0416
-#define SSB_BOARD_BU4309	0x040A
-/* chip_package */
-#define SSB_CHIPPACK_BCM4712S	1	/* Small 200pin 4712 */
-#define SSB_CHIPPACK_BCM4712M	2	/* Medium 225pin 4712 */
-#define SSB_CHIPPACK_BCM4712L	0	/* Large 340pin 4712 */
-
-#include <linux/ssb/ssb_driver_chipcommon.h>
-#include <linux/ssb/ssb_driver_mips.h>
-#include <linux/ssb/ssb_driver_extif.h>
-#include <linux/ssb/ssb_driver_pci.h>
-
-struct ssb_bus {
-	/* The MMIO area. */
-	void __iomem *mmio;
-
-	const struct ssb_bus_ops *ops;
-
-	/* The core currently mapped into the MMIO window.
-	 * Not valid on all host-buses. So don't use outside of SSB. */
-	struct ssb_device *mapped_device;
-	union {
-		/* Currently mapped PCMCIA segment. (bustype == SSB_BUSTYPE_PCMCIA only) */
-		u8 mapped_pcmcia_seg;
-		/* Current SSB base address window for SDIO. */
-		u32 sdio_sbaddr;
-	};
-	/* Lock for core and segment switching.
-	 * On PCMCIA-host busses this is used to protect the whole MMIO access. */
-	spinlock_t bar_lock;
-
-	/* The host-bus this backplane is running on. */
-	enum ssb_bustype bustype;
-	/* Pointers to the host-bus. Check bustype before using any of these pointers. */
-	union {
-		/* Pointer to the PCI bus (only valid if bustype == SSB_BUSTYPE_PCI). */
-		struct pci_dev *host_pci;
-		/* Pointer to the PCMCIA device (only if bustype == SSB_BUSTYPE_PCMCIA). */
-		struct pcmcia_device *host_pcmcia;
-		/* Pointer to the SDIO device (only if bustype == SSB_BUSTYPE_SDIO). */
-		struct sdio_func *host_sdio;
-	};
-
-	/* See enum ssb_quirks */
-	unsigned int quirks;
-
-#ifdef CONFIG_SSB_SPROM
-	/* Mutex to protect the SPROM writing. */
-	struct mutex sprom_mutex;
-#endif
-
-	/* ID information about the Chip. */
-	u16 chip_id;
-	u8 chip_rev;
-	u16 sprom_offset;
-	u16 sprom_size;		/* number of words in sprom */
-	u8 chip_package;
-
-	/* List of devices (cores) on the backplane. */
-	struct ssb_device devices[SSB_MAX_NR_CORES];
-	u8 nr_devices;
-
-	/* Software ID number for this bus. */
-	unsigned int busnumber;
-
-	/* The ChipCommon device (if available). */
-	struct ssb_chipcommon chipco;
-	/* The PCI-core device (if available). */
-	struct ssb_pcicore pcicore;
-	/* The MIPS-core device (if available). */
-	struct ssb_mipscore mipscore;
-	/* The EXTif-core device (if available). */
-	struct ssb_extif extif;
-
-	/* The following structure elements are not available in early
-	 * SSB initialization. Though, they are available for regular
-	 * registered drivers at any stage. So be careful when
-	 * using them in the ssb core code. */
-
-	/* ID information about the PCB. */
-	struct ssb_boardinfo boardinfo;
-	/* Contents of the SPROM. */
-	struct ssb_sprom sprom;
-	/* If the board has a cardbus slot, this is set to true. */
-	bool has_cardbus_slot;
-
-#ifdef CONFIG_SSB_EMBEDDED
-	/* Lock for GPIO register access. */
-	spinlock_t gpio_lock;
-#endif /* EMBEDDED */
-
-	/* Internal-only stuff follows. Do not touch. */
-	struct list_head list;
-#ifdef CONFIG_SSB_DEBUG
-	/* Is the bus already powered up? */
-	bool powered_up;
-	int power_warn_count;
-#endif /* DEBUG */
-};
-
-enum ssb_quirks {
-	/* SDIO connected card requires performing a read after writing a 32-bit value */
-	SSB_QUIRK_SDIO_READ_AFTER_WRITE32	= (1 << 0),
-};
-
-/* The initialization-invariants. */
-struct ssb_init_invariants {
-	/* Versioning information about the PCB. */
-	struct ssb_boardinfo boardinfo;
-	/* The SPROM information. That's either stored in an
-	 * EEPROM or NVRAM on the board. */
-	struct ssb_sprom sprom;
-	/* If the board has a cardbus slot, this is set to true. */
-	bool has_cardbus_slot;
-};
-/* Type of function to fetch the invariants. */
-typedef int (*ssb_invariants_func_t)(struct ssb_bus *bus,
-				     struct ssb_init_invariants *iv);
-
-/* Register a SSB system bus. get_invariants() is called after the
- * basic system devices are initialized.
- * The invariants are usually fetched from some NVRAM.
- * Put the invariants into the struct pointed to by iv. */
-extern int ssb_bus_ssbbus_register(struct ssb_bus *bus,
-				   unsigned long baseaddr,
-				   ssb_invariants_func_t get_invariants);
-#ifdef CONFIG_SSB_PCIHOST
-extern int ssb_bus_pcibus_register(struct ssb_bus *bus,
-				   struct pci_dev *host_pci);
-#endif /* CONFIG_SSB_PCIHOST */
-#ifdef CONFIG_SSB_PCMCIAHOST
-extern int ssb_bus_pcmciabus_register(struct ssb_bus *bus,
-				      struct pcmcia_device *pcmcia_dev,
-				      unsigned long baseaddr);
-#endif /* CONFIG_SSB_PCMCIAHOST */
-#ifdef CONFIG_SSB_SDIOHOST
-extern int ssb_bus_sdiobus_register(struct ssb_bus *bus,
-				    struct sdio_func *sdio_func,
-				    unsigned int quirks);
-#endif /* CONFIG_SSB_SDIOHOST */
-
-
-extern void ssb_bus_unregister(struct ssb_bus *bus);
-
-/* Does the device have an SPROM? */
-extern bool ssb_is_sprom_available(struct ssb_bus *bus);
-
-/* Set a fallback SPROM.
- * See kdoc at the function definition for complete documentation. */
-extern int ssb_arch_register_fallback_sprom(
-		int (*sprom_callback)(struct ssb_bus *bus,
-		struct ssb_sprom *out));
-
-/* Suspend a SSB bus.
- * Call this from the parent bus suspend routine. */
-extern int ssb_bus_suspend(struct ssb_bus *bus);
-/* Resume a SSB bus.
- * Call this from the parent bus resume routine. */
-extern int ssb_bus_resume(struct ssb_bus *bus);
-
-extern u32 ssb_clockspeed(struct ssb_bus *bus);
-
-/* Is the device enabled in hardware? */
-int ssb_device_is_enabled(struct ssb_device *dev);
-/* Enable a device and pass device-specific SSB_TMSLOW flags.
- * If no device-specific flags are available, use 0. */
-void ssb_device_enable(struct ssb_device *dev, u32 core_specific_flags);
-/* Disable a device in hardware and pass SSB_TMSLOW flags (if any). */
-void ssb_device_disable(struct ssb_device *dev, u32 core_specific_flags);
-
-
-/* Device MMIO register read/write functions. */
-static inline u8 ssb_read8(struct ssb_device *dev, u16 offset)
-{
-	return dev->ops->read8(dev, offset);
-}
-static inline u16 ssb_read16(struct ssb_device *dev, u16 offset)
-{
-	return dev->ops->read16(dev, offset);
-}
-static inline u32 ssb_read32(struct ssb_device *dev, u16 offset)
-{
-	return dev->ops->read32(dev, offset);
-}
-static inline void ssb_write8(struct ssb_device *dev, u16 offset, u8 value)
-{
-	dev->ops->write8(dev, offset, value);
-}
-static inline void ssb_write16(struct ssb_device *dev, u16 offset, u16 value)
-{
-	dev->ops->write16(dev, offset, value);
-}
-static inline void ssb_write32(struct ssb_device *dev, u16 offset, u32 value)
-{
-	dev->ops->write32(dev, offset, value);
-}
-#ifdef CONFIG_SSB_BLOCKIO
-static inline void ssb_block_read(struct ssb_device *dev, void *buffer,
-				  size_t count, u16 offset, u8 reg_width)
-{
-	dev->ops->block_read(dev, buffer, count, offset, reg_width);
-}
-
-static inline void ssb_block_write(struct ssb_device *dev, const void *buffer,
-				   size_t count, u16 offset, u8 reg_width)
-{
-	dev->ops->block_write(dev, buffer, count, offset, reg_width);
-}
-#endif /* CONFIG_SSB_BLOCKIO */
-
-
-/* The SSB DMA API. Use this API for any DMA operation on the device.
- * This API basically is a wrapper that calls the correct DMA API for
- * the host device type the SSB device is attached to. */
-
-/* Translation (routing) bits that need to be ORed to DMA
- * addresses before they are given to a device. */
-extern u32 ssb_dma_translation(struct ssb_device *dev);
-#define SSB_DMA_TRANSLATION_MASK	0xC0000000
-#define SSB_DMA_TRANSLATION_SHIFT	30
-
-static inline void __cold __ssb_dma_not_implemented(struct ssb_device *dev)
-{
-#ifdef CONFIG_SSB_DEBUG
-	printk(KERN_ERR "SSB: BUG! Calling DMA API for "
-	       "unsupported bustype %d\n", dev->bus->bustype);
-#endif /* DEBUG */
-}
-
-#ifdef CONFIG_SSB_PCIHOST
-/* PCI-host wrapper driver */
-extern int ssb_pcihost_register(struct pci_driver *driver);
-static inline void ssb_pcihost_unregister(struct pci_driver *driver)
-{
-	pci_unregister_driver(driver);
-}
-
-static inline
-void ssb_pcihost_set_power_state(struct ssb_device *sdev, pci_power_t state)
-{
-	if (sdev->bus->bustype == SSB_BUSTYPE_PCI)
-		pci_set_power_state(sdev->bus->host_pci, state);
-}
-#else
-static inline void ssb_pcihost_unregister(struct pci_driver *driver)
-{
-}
-
-static inline
-void ssb_pcihost_set_power_state(struct ssb_device *sdev, pci_power_t state)
-{
-}
-#endif /* CONFIG_SSB_PCIHOST */
-
-
-/* If a driver is shutdown or suspended, call this to signal
- * that the bus may be completely powered down. SSB will decide,
- * if it's really time to power down the bus, based on if there
- * are other devices that want to run. */
-extern int ssb_bus_may_powerdown(struct ssb_bus *bus);
-/* Before initializing and enabling a device, call this to power-up the bus.
- * If you want to allow use of dynamic-power-control, pass the flag.
- * Otherwise static always-on powercontrol will be used. */
-extern int ssb_bus_powerup(struct ssb_bus *bus, bool dynamic_pctl);
-
-extern void ssb_commit_settings(struct ssb_bus *bus);
-
-/* Various helper functions */
-extern u32 ssb_admatch_base(u32 adm);
-extern u32 ssb_admatch_size(u32 adm);
-
-/* PCI device mapping and fixup routines.
- * Called from the architecture pcibios init code.
- * These are only available on SSB_EMBEDDED configurations. */
-#ifdef CONFIG_SSB_EMBEDDED
-int ssb_pcibios_plat_dev_init(struct pci_dev *dev);
-int ssb_pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin);
-#endif /* CONFIG_SSB_EMBEDDED */
-
-#endif /* LINUX_SSB_H_ */
diff --git a/ANDROID_3.4.5/include/linux/ssb/ssb_driver_chipcommon.h b/ANDROID_3.4.5/include/linux/ssb/ssb_driver_chipcommon.h
deleted file mode 100644
index 1a6b0045..00000000
--- a/ANDROID_3.4.5/include/linux/ssb/ssb_driver_chipcommon.h
+++ /dev/null
@@ -1,665 +0,0 @@
-#ifndef LINUX_SSB_CHIPCO_H_
-#define LINUX_SSB_CHIPCO_H_
-
-/* SonicsSiliconBackplane CHIPCOMMON core hardware definitions
- *
- * The chipcommon core provides chip identification, SB control,
- * jtag, 0/1/2 uarts, clock frequency control, a watchdog interrupt timer,
- * gpio interface, extbus, and support for serial and parallel flashes.
- *
- * Copyright 2005, Broadcom Corporation
- * Copyright 2006, Michael Buesch <m@bues.ch>
- *
- * Licensed under the GPL version 2. See COPYING for details.
- */
-
-/** ChipCommon core registers. **/
-
-#define SSB_CHIPCO_CHIPID		0x0000
-#define  SSB_CHIPCO_IDMASK		0x0000FFFF
-#define  SSB_CHIPCO_REVMASK		0x000F0000
-#define  SSB_CHIPCO_REVSHIFT		16
-#define  SSB_CHIPCO_PACKMASK		0x00F00000
-#define  SSB_CHIPCO_PACKSHIFT		20
-#define  SSB_CHIPCO_NRCORESMASK		0x0F000000
-#define  SSB_CHIPCO_NRCORESSHIFT	24
-#define SSB_CHIPCO_CAP	 		0x0004		/* Capabilities */
-#define  SSB_CHIPCO_CAP_NRUART		0x00000003	/* # of UARTs */
-#define  SSB_CHIPCO_CAP_MIPSEB		0x00000004	/* MIPS in BigEndian Mode */
-#define  SSB_CHIPCO_CAP_UARTCLK		0x00000018	/* UART clock select */
-#define   SSB_CHIPCO_CAP_UARTCLK_INT	0x00000008	/* UARTs are driven by internal divided clock */
-#define  SSB_CHIPCO_CAP_UARTGPIO	0x00000020	/* UARTs on GPIO 15-12 */
-#define  SSB_CHIPCO_CAP_EXTBUS		0x000000C0	/* External buses present */
-#define  SSB_CHIPCO_CAP_FLASHT		0x00000700	/* Flash Type */
-#define   SSB_CHIPCO_FLASHT_NONE	0x00000000	/* No flash */
-#define   SSB_CHIPCO_FLASHT_STSER	0x00000100	/* ST serial flash */
-#define   SSB_CHIPCO_FLASHT_ATSER	0x00000200	/* Atmel serial flash */
-#define	  SSB_CHIPCO_FLASHT_PARA	0x00000700	/* Parallel flash */
-#define  SSB_CHIPCO_CAP_PLLT		0x00038000	/* PLL Type */
-#define   SSB_PLLTYPE_NONE		0x00000000
-#define   SSB_PLLTYPE_1			0x00010000	/* 48Mhz base, 3 dividers */
-#define   SSB_PLLTYPE_2			0x00020000	/* 48Mhz, 4 dividers */
-#define   SSB_PLLTYPE_3			0x00030000	/* 25Mhz, 2 dividers */
-#define   SSB_PLLTYPE_4			0x00008000	/* 48Mhz, 4 dividers */
-#define   SSB_PLLTYPE_5			0x00018000	/* 25Mhz, 4 dividers */
-#define   SSB_PLLTYPE_6			0x00028000	/* 100/200 or 120/240 only */
-#define   SSB_PLLTYPE_7			0x00038000	/* 25Mhz, 4 dividers */
-#define  SSB_CHIPCO_CAP_PCTL		0x00040000	/* Power Control */
-#define  SSB_CHIPCO_CAP_OTPS		0x00380000	/* OTP size */
-#define  SSB_CHIPCO_CAP_OTPS_SHIFT	19
-#define  SSB_CHIPCO_CAP_OTPS_BASE	5
-#define  SSB_CHIPCO_CAP_JTAGM		0x00400000	/* JTAG master present */
-#define  SSB_CHIPCO_CAP_BROM		0x00800000	/* Internal boot ROM active */
-#define  SSB_CHIPCO_CAP_64BIT		0x08000000	/* 64-bit Backplane */
-#define  SSB_CHIPCO_CAP_PMU		0x10000000	/* PMU available (rev >= 20) */
-#define  SSB_CHIPCO_CAP_ECI		0x20000000	/* ECI available (rev >= 20) */
-#define  SSB_CHIPCO_CAP_SPROM		0x40000000	/* SPROM present */
-#define SSB_CHIPCO_CORECTL		0x0008
-#define  SSB_CHIPCO_CORECTL_UARTCLK0	0x00000001	/* Drive UART with internal clock */
-#define	 SSB_CHIPCO_CORECTL_SE		0x00000002	/* sync clk out enable (corerev >= 3) */
-#define  SSB_CHIPCO_CORECTL_UARTCLKEN	0x00000008	/* UART clock enable (rev >= 21) */
-#define SSB_CHIPCO_BIST			0x000C
-#define SSB_CHIPCO_OTPS			0x0010		/* OTP status */
-#define	 SSB_CHIPCO_OTPS_PROGFAIL	0x80000000
-#define	 SSB_CHIPCO_OTPS_PROTECT	0x00000007
-#define	 SSB_CHIPCO_OTPS_HW_PROTECT	0x00000001
-#define	 SSB_CHIPCO_OTPS_SW_PROTECT	0x00000002
-#define	 SSB_CHIPCO_OTPS_CID_PROTECT	0x00000004
-#define SSB_CHIPCO_OTPC			0x0014		/* OTP control */
-#define	 SSB_CHIPCO_OTPC_RECWAIT	0xFF000000
-#define	 SSB_CHIPCO_OTPC_PROGWAIT	0x00FFFF00
-#define	 SSB_CHIPCO_OTPC_PRW_SHIFT	8
-#define	 SSB_CHIPCO_OTPC_MAXFAIL	0x00000038
-#define	 SSB_CHIPCO_OTPC_VSEL		0x00000006
-#define	 SSB_CHIPCO_OTPC_SELVL		0x00000001
-#define SSB_CHIPCO_OTPP			0x0018		/* OTP prog */
-#define	 SSB_CHIPCO_OTPP_COL		0x000000FF
-#define	 SSB_CHIPCO_OTPP_ROW		0x0000FF00
-#define	 SSB_CHIPCO_OTPP_ROW_SHIFT	8
-#define	 SSB_CHIPCO_OTPP_READERR	0x10000000
-#define	 SSB_CHIPCO_OTPP_VALUE		0x20000000
-#define	 SSB_CHIPCO_OTPP_READ		0x40000000
-#define	 SSB_CHIPCO_OTPP_START		0x80000000
-#define	 SSB_CHIPCO_OTPP_BUSY		0x80000000
-#define SSB_CHIPCO_IRQSTAT		0x0020
-#define SSB_CHIPCO_IRQMASK		0x0024
-#define	 SSB_CHIPCO_IRQ_GPIO		0x00000001	/* gpio intr */
-#define	 SSB_CHIPCO_IRQ_EXT		0x00000002	/* ro: ext intr pin (corerev >= 3) */
-#define	 SSB_CHIPCO_IRQ_WDRESET		0x80000000	/* watchdog reset occurred */
-#define SSB_CHIPCO_CHIPCTL		0x0028		/* Rev >= 11 only */
-#define SSB_CHIPCO_CHIPSTAT		0x002C		/* Rev >= 11 only */
-#define SSB_CHIPCO_JCMD			0x0030		/* Rev >= 10 only */
-#define  SSB_CHIPCO_JCMD_START		0x80000000
-#define  SSB_CHIPCO_JCMD_BUSY		0x80000000
-#define  SSB_CHIPCO_JCMD_PAUSE		0x40000000
-#define  SSB_CHIPCO_JCMD0_ACC_MASK	0x0000F000
-#define  SSB_CHIPCO_JCMD0_ACC_IRDR	0x00000000
-#define  SSB_CHIPCO_JCMD0_ACC_DR	0x00001000
-#define  SSB_CHIPCO_JCMD0_ACC_IR	0x00002000
-#define  SSB_CHIPCO_JCMD0_ACC_RESET	0x00003000
-#define  SSB_CHIPCO_JCMD0_ACC_IRPDR	0x00004000
-#define  SSB_CHIPCO_JCMD0_ACC_PDR	0x00005000
-#define  SSB_CHIPCO_JCMD0_IRW_MASK	0x00000F00
-#define  SSB_CHIPCO_JCMD_ACC_MASK	0x000F0000	/* Changes for corerev 11 */
-#define  SSB_CHIPCO_JCMD_ACC_IRDR	0x00000000
-#define  SSB_CHIPCO_JCMD_ACC_DR		0x00010000
-#define  SSB_CHIPCO_JCMD_ACC_IR		0x00020000
-#define  SSB_CHIPCO_JCMD_ACC_RESET	0x00030000
-#define  SSB_CHIPCO_JCMD_ACC_IRPDR	0x00040000
-#define  SSB_CHIPCO_JCMD_ACC_PDR	0x00050000
-#define  SSB_CHIPCO_JCMD_IRW_MASK	0x00001F00
-#define  SSB_CHIPCO_JCMD_IRW_SHIFT	8
-#define  SSB_CHIPCO_JCMD_DRW_MASK	0x0000003F
-#define SSB_CHIPCO_JIR			0x0034		/* Rev >= 10 only */
-#define SSB_CHIPCO_JDR			0x0038		/* Rev >= 10 only */
-#define SSB_CHIPCO_JCTL			0x003C		/* Rev >= 10 only */
-#define  SSB_CHIPCO_JCTL_FORCE_CLK	4		/* Force clock */
-#define  SSB_CHIPCO_JCTL_EXT_EN		2		/* Enable external targets */
-#define  SSB_CHIPCO_JCTL_EN		1		/* Enable Jtag master */
-#define SSB_CHIPCO_FLASHCTL		0x0040
-#define  SSB_CHIPCO_FLASHCTL_START	0x80000000
-#define  SSB_CHIPCO_FLASHCTL_BUSY	SSB_CHIPCO_FLASHCTL_START
-#define SSB_CHIPCO_FLASHADDR		0x0044
-#define SSB_CHIPCO_FLASHDATA		0x0048
-#define SSB_CHIPCO_BCAST_ADDR		0x0050
-#define SSB_CHIPCO_BCAST_DATA		0x0054
-#define SSB_CHIPCO_GPIOPULLUP		0x0058		/* Rev >= 20 only */
-#define SSB_CHIPCO_GPIOPULLDOWN		0x005C		/* Rev >= 20 only */
-#define SSB_CHIPCO_GPIOIN		0x0060
-#define SSB_CHIPCO_GPIOOUT		0x0064
-#define SSB_CHIPCO_GPIOOUTEN		0x0068
-#define SSB_CHIPCO_GPIOCTL		0x006C
-#define SSB_CHIPCO_GPIOPOL		0x0070
-#define SSB_CHIPCO_GPIOIRQ		0x0074
-#define SSB_CHIPCO_WATCHDOG		0x0080
-#define SSB_CHIPCO_GPIOTIMER		0x0088		/* LED powersave (corerev >= 16) */
-#define  SSB_CHIPCO_GPIOTIMER_OFFTIME	0x0000FFFF
-#define  SSB_CHIPCO_GPIOTIMER_OFFTIME_SHIFT	0
-#define  SSB_CHIPCO_GPIOTIMER_ONTIME	0xFFFF0000
-#define  SSB_CHIPCO_GPIOTIMER_ONTIME_SHIFT	16
-#define SSB_CHIPCO_GPIOTOUTM		0x008C		/* LED powersave (corerev >= 16) */
-#define SSB_CHIPCO_CLOCK_N		0x0090
-#define SSB_CHIPCO_CLOCK_SB		0x0094
-#define SSB_CHIPCO_CLOCK_PCI		0x0098
-#define SSB_CHIPCO_CLOCK_M2		0x009C
-#define SSB_CHIPCO_CLOCK_MIPS		0x00A0
-#define SSB_CHIPCO_CLKDIV		0x00A4		/* Rev >= 3 only */
-#define	 SSB_CHIPCO_CLKDIV_SFLASH	0x0F000000
-#define	 SSB_CHIPCO_CLKDIV_SFLASH_SHIFT	24
-#define	 SSB_CHIPCO_CLKDIV_OTP		0x000F0000
-#define	 SSB_CHIPCO_CLKDIV_OTP_SHIFT	16
-#define	 SSB_CHIPCO_CLKDIV_JTAG		0x00000F00
-#define	 SSB_CHIPCO_CLKDIV_JTAG_SHIFT	8
-#define	 SSB_CHIPCO_CLKDIV_UART		0x000000FF
-#define SSB_CHIPCO_PLLONDELAY		0x00B0		/* Rev >= 4 only */
-#define SSB_CHIPCO_FREFSELDELAY		0x00B4		/* Rev >= 4 only */
-#define SSB_CHIPCO_SLOWCLKCTL		0x00B8		/* 6 <= Rev <= 9 only */
-#define  SSB_CHIPCO_SLOWCLKCTL_SRC	0x00000007	/* slow clock source mask */
-#define	  SSB_CHIPCO_SLOWCLKCTL_SRC_LPO		0x00000000	/* source of slow clock is LPO */
-#define   SSB_CHIPCO_SLOWCLKCTL_SRC_XTAL	0x00000001	/* source of slow clock is crystal */
-#define	  SSB_CHIPCO_SLOECLKCTL_SRC_PCI		0x00000002	/* source of slow clock is PCI */
-#define  SSB_CHIPCO_SLOWCLKCTL_LPOFREQ	0x00000200	/* LPOFreqSel, 1: 160Khz, 0: 32KHz */
-#define  SSB_CHIPCO_SLOWCLKCTL_LPOPD	0x00000400	/* LPOPowerDown, 1: LPO is disabled, 0: LPO is enabled */
-#define  SSB_CHIPCO_SLOWCLKCTL_FSLOW	0x00000800	/* ForceSlowClk, 1: sb/cores running on slow clock, 0: power logic control */
-#define  SSB_CHIPCO_SLOWCLKCTL_IPLL	0x00001000	/* IgnorePllOffReq, 1/0: power logic ignores/honors PLL clock disable requests from core */
-#define  SSB_CHIPCO_SLOWCLKCTL_ENXTAL	0x00002000	/* XtalControlEn, 1/0: power logic does/doesn't disable crystal when appropriate */
-#define  SSB_CHIPCO_SLOWCLKCTL_XTALPU	0x00004000	/* XtalPU (RO), 1/0: crystal running/disabled */
-#define  SSB_CHIPCO_SLOWCLKCTL_CLKDIV	0xFFFF0000	/* ClockDivider (SlowClk = 1/(4+divisor)) */
-#define  SSB_CHIPCO_SLOWCLKCTL_CLKDIV_SHIFT	16
-#define SSB_CHIPCO_SYSCLKCTL		0x00C0		/* Rev >= 3 only */
-#define	 SSB_CHIPCO_SYSCLKCTL_IDLPEN	0x00000001	/* ILPen: Enable Idle Low Power */
-#define	 SSB_CHIPCO_SYSCLKCTL_ALPEN	0x00000002	/* ALPen: Enable Active Low Power */
-#define	 SSB_CHIPCO_SYSCLKCTL_PLLEN	0x00000004	/* ForcePLLOn */
-#define	 SSB_CHIPCO_SYSCLKCTL_FORCEALP	0x00000008	/* Force ALP (or HT if ALPen is not set */
-#define	 SSB_CHIPCO_SYSCLKCTL_FORCEHT	0x00000010	/* Force HT */
-#define  SSB_CHIPCO_SYSCLKCTL_CLKDIV	0xFFFF0000	/* ClkDiv  (ILP = 1/(4+divisor)) */
-#define  SSB_CHIPCO_SYSCLKCTL_CLKDIV_SHIFT	16
-#define SSB_CHIPCO_CLKSTSTR		0x00C4		/* Rev >= 3 only */
-#define SSB_CHIPCO_PCMCIA_CFG		0x0100
-#define SSB_CHIPCO_PCMCIA_MEMWAIT	0x0104
-#define SSB_CHIPCO_PCMCIA_ATTRWAIT	0x0108
-#define SSB_CHIPCO_PCMCIA_IOWAIT	0x010C
-#define SSB_CHIPCO_IDE_CFG		0x0110
-#define SSB_CHIPCO_IDE_MEMWAIT		0x0114
-#define SSB_CHIPCO_IDE_ATTRWAIT		0x0118
-#define SSB_CHIPCO_IDE_IOWAIT		0x011C
-#define SSB_CHIPCO_PROG_CFG		0x0120
-#define SSB_CHIPCO_PROG_WAITCNT		0x0124
-#define SSB_CHIPCO_FLASH_CFG		0x0128
-#define SSB_CHIPCO_FLASH_WAITCNT	0x012C
-#define SSB_CHIPCO_CLKCTLST		0x01E0 /* Clock control and status (rev >= 20) */
-#define  SSB_CHIPCO_CLKCTLST_FORCEALP	0x00000001 /* Force ALP request */
-#define  SSB_CHIPCO_CLKCTLST_FORCEHT	0x00000002 /* Force HT request */
-#define  SSB_CHIPCO_CLKCTLST_FORCEILP	0x00000004 /* Force ILP request */
-#define  SSB_CHIPCO_CLKCTLST_HAVEALPREQ	0x00000008 /* ALP available request */
-#define  SSB_CHIPCO_CLKCTLST_HAVEHTREQ	0x00000010 /* HT available request */
-#define  SSB_CHIPCO_CLKCTLST_HWCROFF	0x00000020 /* Force HW clock request off */
-#define  SSB_CHIPCO_CLKCTLST_HAVEALP	0x00010000 /* ALP available */
-#define  SSB_CHIPCO_CLKCTLST_HAVEHT	0x00020000 /* HT available */
-#define  SSB_CHIPCO_CLKCTLST_4328A0_HAVEHT	0x00010000 /* 4328a0 has reversed bits */
-#define  SSB_CHIPCO_CLKCTLST_4328A0_HAVEALP	0x00020000 /* 4328a0 has reversed bits */
-#define SSB_CHIPCO_HW_WORKAROUND	0x01E4 /* Hardware workaround (rev >= 20) */
-#define SSB_CHIPCO_UART0_DATA		0x0300
-#define SSB_CHIPCO_UART0_IMR		0x0304
-#define SSB_CHIPCO_UART0_FCR		0x0308
-#define SSB_CHIPCO_UART0_LCR		0x030C
-#define SSB_CHIPCO_UART0_MCR		0x0310
-#define SSB_CHIPCO_UART0_LSR		0x0314
-#define SSB_CHIPCO_UART0_MSR		0x0318
-#define SSB_CHIPCO_UART0_SCRATCH	0x031C
-#define SSB_CHIPCO_UART1_DATA		0x0400
-#define SSB_CHIPCO_UART1_IMR		0x0404
-#define SSB_CHIPCO_UART1_FCR		0x0408
-#define SSB_CHIPCO_UART1_LCR		0x040C
-#define SSB_CHIPCO_UART1_MCR		0x0410
-#define SSB_CHIPCO_UART1_LSR		0x0414
-#define SSB_CHIPCO_UART1_MSR		0x0418
-#define SSB_CHIPCO_UART1_SCRATCH	0x041C
-/* PMU registers (rev >= 20) */
-#define SSB_CHIPCO_PMU_CTL			0x0600 /* PMU control */
-#define  SSB_CHIPCO_PMU_CTL_ILP_DIV		0xFFFF0000 /* ILP div mask */
-#define  SSB_CHIPCO_PMU_CTL_ILP_DIV_SHIFT	16
-#define  SSB_CHIPCO_PMU_CTL_NOILPONW		0x00000200 /* No ILP on wait */
-#define  SSB_CHIPCO_PMU_CTL_HTREQEN		0x00000100 /* HT req enable */
-#define  SSB_CHIPCO_PMU_CTL_ALPREQEN		0x00000080 /* ALP req enable */
-#define  SSB_CHIPCO_PMU_CTL_XTALFREQ		0x0000007C /* Crystal freq */
-#define  SSB_CHIPCO_PMU_CTL_XTALFREQ_SHIFT	2
-#define  SSB_CHIPCO_PMU_CTL_ILPDIVEN		0x00000002 /* ILP div enable */
-#define  SSB_CHIPCO_PMU_CTL_LPOSEL		0x00000001 /* LPO sel */
-#define SSB_CHIPCO_PMU_CAP			0x0604 /* PMU capabilities */
-#define  SSB_CHIPCO_PMU_CAP_REVISION		0x000000FF /* Revision mask */
-#define SSB_CHIPCO_PMU_STAT			0x0608 /* PMU status */
-#define  SSB_CHIPCO_PMU_STAT_INTPEND		0x00000040 /* Interrupt pending */
-#define  SSB_CHIPCO_PMU_STAT_SBCLKST		0x00000030 /* Backplane clock status? */
-#define  SSB_CHIPCO_PMU_STAT_HAVEALP		0x00000008 /* ALP available */
-#define  SSB_CHIPCO_PMU_STAT_HAVEHT		0x00000004 /* HT available */
-#define  SSB_CHIPCO_PMU_STAT_RESINIT		0x00000003 /* Res init */
-#define SSB_CHIPCO_PMU_RES_STAT			0x060C /* PMU res status */
-#define SSB_CHIPCO_PMU_RES_PEND			0x0610 /* PMU res pending */
-#define SSB_CHIPCO_PMU_TIMER			0x0614 /* PMU timer */
-#define SSB_CHIPCO_PMU_MINRES_MSK		0x0618 /* PMU min res mask */
-#define SSB_CHIPCO_PMU_MAXRES_MSK		0x061C /* PMU max res mask */
-#define SSB_CHIPCO_PMU_RES_TABSEL		0x0620 /* PMU res table sel */
-#define SSB_CHIPCO_PMU_RES_DEPMSK		0x0624 /* PMU res dep mask */
-#define SSB_CHIPCO_PMU_RES_UPDNTM		0x0628 /* PMU res updown timer */
-#define SSB_CHIPCO_PMU_RES_TIMER		0x062C /* PMU res timer */
-#define SSB_CHIPCO_PMU_CLKSTRETCH		0x0630 /* PMU clockstretch */
-#define SSB_CHIPCO_PMU_WATCHDOG			0x0634 /* PMU watchdog */
-#define SSB_CHIPCO_PMU_RES_REQTS		0x0640 /* PMU res req timer sel */
-#define SSB_CHIPCO_PMU_RES_REQT			0x0644 /* PMU res req timer */
-#define SSB_CHIPCO_PMU_RES_REQM			0x0648 /* PMU res req mask */
-#define SSB_CHIPCO_CHIPCTL_ADDR			0x0650
-#define SSB_CHIPCO_CHIPCTL_DATA			0x0654
-#define SSB_CHIPCO_REGCTL_ADDR			0x0658
-#define SSB_CHIPCO_REGCTL_DATA			0x065C
-#define SSB_CHIPCO_PLLCTL_ADDR			0x0660
-#define SSB_CHIPCO_PLLCTL_DATA			0x0664
-
-
-
-/** PMU PLL registers */
-
-/* PMU rev 0 PLL registers */
-#define SSB_PMU0_PLLCTL0			0
-#define  SSB_PMU0_PLLCTL0_PDIV_MSK		0x00000001
-#define  SSB_PMU0_PLLCTL0_PDIV_FREQ		25000 /* kHz */
-#define SSB_PMU0_PLLCTL1			1
-#define  SSB_PMU0_PLLCTL1_WILD_IMSK		0xF0000000 /* Wild int mask (low nibble) */
-#define  SSB_PMU0_PLLCTL1_WILD_IMSK_SHIFT	28
-#define  SSB_PMU0_PLLCTL1_WILD_FMSK		0x0FFFFF00 /* Wild frac mask */
-#define  SSB_PMU0_PLLCTL1_WILD_FMSK_SHIFT	8
-#define  SSB_PMU0_PLLCTL1_STOPMOD		0x00000040 /* Stop mod */
-#define SSB_PMU0_PLLCTL2			2
-#define  SSB_PMU0_PLLCTL2_WILD_IMSKHI		0x0000000F /* Wild int mask (high nibble) */
-#define  SSB_PMU0_PLLCTL2_WILD_IMSKHI_SHIFT	0
-
-/* PMU rev 1 PLL registers */
-#define SSB_PMU1_PLLCTL0			0
-#define  SSB_PMU1_PLLCTL0_P1DIV			0x00F00000 /* P1 div */
-#define  SSB_PMU1_PLLCTL0_P1DIV_SHIFT		20
-#define  SSB_PMU1_PLLCTL0_P2DIV			0x0F000000 /* P2 div */
-#define  SSB_PMU1_PLLCTL0_P2DIV_SHIFT		24
-#define SSB_PMU1_PLLCTL1			1
-#define  SSB_PMU1_PLLCTL1_M1DIV			0x000000FF /* M1 div */
-#define  SSB_PMU1_PLLCTL1_M1DIV_SHIFT		0
-#define  SSB_PMU1_PLLCTL1_M2DIV			0x0000FF00 /* M2 div */
-#define  SSB_PMU1_PLLCTL1_M2DIV_SHIFT		8
-#define  SSB_PMU1_PLLCTL1_M3DIV			0x00FF0000 /* M3 div */
-#define  SSB_PMU1_PLLCTL1_M3DIV_SHIFT		16
-#define  SSB_PMU1_PLLCTL1_M4DIV			0xFF000000 /* M4 div */
-#define  SSB_PMU1_PLLCTL1_M4DIV_SHIFT		24
-#define SSB_PMU1_PLLCTL2			2
-#define  SSB_PMU1_PLLCTL2_M5DIV			0x000000FF /* M5 div */
-#define  SSB_PMU1_PLLCTL2_M5DIV_SHIFT		0
-#define  SSB_PMU1_PLLCTL2_M6DIV			0x0000FF00 /* M6 div */
-#define  SSB_PMU1_PLLCTL2_M6DIV_SHIFT		8
-#define  SSB_PMU1_PLLCTL2_NDIVMODE		0x000E0000 /* NDIV mode */
-#define  SSB_PMU1_PLLCTL2_NDIVMODE_SHIFT	17
-#define  SSB_PMU1_PLLCTL2_NDIVINT		0x1FF00000 /* NDIV int */
-#define  SSB_PMU1_PLLCTL2_NDIVINT_SHIFT		20
-#define SSB_PMU1_PLLCTL3			3
-#define  SSB_PMU1_PLLCTL3_NDIVFRAC		0x00FFFFFF /* NDIV frac */
-#define  SSB_PMU1_PLLCTL3_NDIVFRAC_SHIFT	0
-#define SSB_PMU1_PLLCTL4			4
-#define SSB_PMU1_PLLCTL5			5
-#define  SSB_PMU1_PLLCTL5_CLKDRV		0xFFFFFF00 /* clk drv */
-#define  SSB_PMU1_PLLCTL5_CLKDRV_SHIFT		8
-
-/* BCM4312 PLL resource numbers. */
-#define SSB_PMURES_4312_SWITCHER_BURST		0
-#define SSB_PMURES_4312_SWITCHER_PWM    	1
-#define SSB_PMURES_4312_PA_REF_LDO		2
-#define SSB_PMURES_4312_CORE_LDO_BURST		3
-#define SSB_PMURES_4312_CORE_LDO_PWM		4
-#define SSB_PMURES_4312_RADIO_LDO		5
-#define SSB_PMURES_4312_ILP_REQUEST		6
-#define SSB_PMURES_4312_BG_FILTBYP		7
-#define SSB_PMURES_4312_TX_FILTBYP		8
-#define SSB_PMURES_4312_RX_FILTBYP		9
-#define SSB_PMURES_4312_XTAL_PU			10
-#define SSB_PMURES_4312_ALP_AVAIL		11
-#define SSB_PMURES_4312_BB_PLL_FILTBYP		12
-#define SSB_PMURES_4312_RF_PLL_FILTBYP		13
-#define SSB_PMURES_4312_HT_AVAIL		14
-
-/* BCM4325 PLL resource numbers. */
-#define SSB_PMURES_4325_BUCK_BOOST_BURST	0
-#define SSB_PMURES_4325_CBUCK_BURST		1
-#define SSB_PMURES_4325_CBUCK_PWM		2
-#define SSB_PMURES_4325_CLDO_CBUCK_BURST	3
-#define SSB_PMURES_4325_CLDO_CBUCK_PWM		4
-#define SSB_PMURES_4325_BUCK_BOOST_PWM		5
-#define SSB_PMURES_4325_ILP_REQUEST		6
-#define SSB_PMURES_4325_ABUCK_BURST		7
-#define SSB_PMURES_4325_ABUCK_PWM		8
-#define SSB_PMURES_4325_LNLDO1_PU		9
-#define SSB_PMURES_4325_LNLDO2_PU		10
-#define SSB_PMURES_4325_LNLDO3_PU		11
-#define SSB_PMURES_4325_LNLDO4_PU		12
-#define SSB_PMURES_4325_XTAL_PU			13
-#define SSB_PMURES_4325_ALP_AVAIL		14
-#define SSB_PMURES_4325_RX_PWRSW_PU		15
-#define SSB_PMURES_4325_TX_PWRSW_PU		16
-#define SSB_PMURES_4325_RFPLL_PWRSW_PU		17
-#define SSB_PMURES_4325_LOGEN_PWRSW_PU		18
-#define SSB_PMURES_4325_AFE_PWRSW_PU		19
-#define SSB_PMURES_4325_BBPLL_PWRSW_PU		20
-#define SSB_PMURES_4325_HT_AVAIL		21
-
-/* BCM4328 PLL resource numbers. */
-#define SSB_PMURES_4328_EXT_SWITCHER_PWM	0
-#define SSB_PMURES_4328_BB_SWITCHER_PWM		1
-#define SSB_PMURES_4328_BB_SWITCHER_BURST	2
-#define SSB_PMURES_4328_BB_EXT_SWITCHER_BURST	3
-#define SSB_PMURES_4328_ILP_REQUEST		4
-#define SSB_PMURES_4328_RADIO_SWITCHER_PWM	5
-#define SSB_PMURES_4328_RADIO_SWITCHER_BURST	6
-#define SSB_PMURES_4328_ROM_SWITCH		7
-#define SSB_PMURES_4328_PA_REF_LDO		8
-#define SSB_PMURES_4328_RADIO_LDO		9
-#define SSB_PMURES_4328_AFE_LDO			10
-#define SSB_PMURES_4328_PLL_LDO			11
-#define SSB_PMURES_4328_BG_FILTBYP		12
-#define SSB_PMURES_4328_TX_FILTBYP		13
-#define SSB_PMURES_4328_RX_FILTBYP		14
-#define SSB_PMURES_4328_XTAL_PU			15
-#define SSB_PMURES_4328_XTAL_EN			16
-#define SSB_PMURES_4328_BB_PLL_FILTBYP		17
-#define SSB_PMURES_4328_RF_PLL_FILTBYP		18
-#define SSB_PMURES_4328_BB_PLL_PU		19
-
-/* BCM5354 PLL resource numbers. */
-#define SSB_PMURES_5354_EXT_SWITCHER_PWM	0
-#define SSB_PMURES_5354_BB_SWITCHER_PWM		1
-#define SSB_PMURES_5354_BB_SWITCHER_BURST	2
-#define SSB_PMURES_5354_BB_EXT_SWITCHER_BURST	3
-#define SSB_PMURES_5354_ILP_REQUEST		4
-#define SSB_PMURES_5354_RADIO_SWITCHER_PWM	5
-#define SSB_PMURES_5354_RADIO_SWITCHER_BURST	6
-#define SSB_PMURES_5354_ROM_SWITCH		7
-#define SSB_PMURES_5354_PA_REF_LDO		8
-#define SSB_PMURES_5354_RADIO_LDO		9
-#define SSB_PMURES_5354_AFE_LDO			10
-#define SSB_PMURES_5354_PLL_LDO			11
-#define SSB_PMURES_5354_BG_FILTBYP		12
-#define SSB_PMURES_5354_TX_FILTBYP		13
-#define SSB_PMURES_5354_RX_FILTBYP		14
-#define SSB_PMURES_5354_XTAL_PU			15
-#define SSB_PMURES_5354_XTAL_EN			16
-#define SSB_PMURES_5354_BB_PLL_FILTBYP		17
-#define SSB_PMURES_5354_RF_PLL_FILTBYP		18
-#define SSB_PMURES_5354_BB_PLL_PU		19
-
-
-
-/** Chip specific Chip-Status register contents. */
-#define SSB_CHIPCO_CHST_4322_SPROM_EXISTS	0x00000040 /* SPROM present */
-#define SSB_CHIPCO_CHST_4325_SPROM_OTP_SEL	0x00000003
-#define SSB_CHIPCO_CHST_4325_DEFCIS_SEL		0 /* OTP is powered up, use def. CIS, no SPROM */
-#define SSB_CHIPCO_CHST_4325_SPROM_SEL		1 /* OTP is powered up, SPROM is present */
-#define SSB_CHIPCO_CHST_4325_OTP_SEL		2 /* OTP is powered up, no SPROM */
-#define SSB_CHIPCO_CHST_4325_OTP_PWRDN		3 /* OTP is powered down, SPROM is present */
-#define SSB_CHIPCO_CHST_4325_SDIO_USB_MODE	0x00000004
-#define SSB_CHIPCO_CHST_4325_SDIO_USB_MODE_SHIFT  2
-#define SSB_CHIPCO_CHST_4325_RCAL_VALID		0x00000008
-#define SSB_CHIPCO_CHST_4325_RCAL_VALID_SHIFT	3
-#define SSB_CHIPCO_CHST_4325_RCAL_VALUE		0x000001F0
-#define SSB_CHIPCO_CHST_4325_RCAL_VALUE_SHIFT	4
-#define SSB_CHIPCO_CHST_4325_PMUTOP_2B 		0x00000200 /* 1 for 2b, 0 for to 2a */
-
-/** Macros to determine SPROM presence based on Chip-Status register. */
-#define SSB_CHIPCO_CHST_4312_SPROM_PRESENT(status) \
-	((status & SSB_CHIPCO_CHST_4325_SPROM_OTP_SEL) != \
-		SSB_CHIPCO_CHST_4325_OTP_SEL)
-#define SSB_CHIPCO_CHST_4322_SPROM_PRESENT(status) \
-	(status & SSB_CHIPCO_CHST_4322_SPROM_EXISTS)
-#define SSB_CHIPCO_CHST_4325_SPROM_PRESENT(status) \
-	(((status & SSB_CHIPCO_CHST_4325_SPROM_OTP_SEL) != \
-		SSB_CHIPCO_CHST_4325_DEFCIS_SEL) && \
-	 ((status & SSB_CHIPCO_CHST_4325_SPROM_OTP_SEL) != \
-		SSB_CHIPCO_CHST_4325_OTP_SEL))
-
-
-
-/** Clockcontrol masks and values **/
-
-/* SSB_CHIPCO_CLOCK_N */
-#define	SSB_CHIPCO_CLK_N1		0x0000003F	/* n1 control */
-#define	SSB_CHIPCO_CLK_N2		0x00003F00	/* n2 control */
-#define	SSB_CHIPCO_CLK_N2_SHIFT		8
-#define	SSB_CHIPCO_CLK_PLLC		0x000F0000	/* pll control */
-#define	SSB_CHIPCO_CLK_PLLC_SHIFT	16
-
-/* SSB_CHIPCO_CLOCK_SB/PCI/UART */
-#define	SSB_CHIPCO_CLK_M1		0x0000003F	/* m1 control */
-#define	SSB_CHIPCO_CLK_M2		0x00003F00	/* m2 control */
-#define	SSB_CHIPCO_CLK_M2_SHIFT		8
-#define	SSB_CHIPCO_CLK_M3		0x003F0000	/* m3 control */
-#define	SSB_CHIPCO_CLK_M3_SHIFT		16
-#define	SSB_CHIPCO_CLK_MC		0x1F000000	/* mux control */
-#define	SSB_CHIPCO_CLK_MC_SHIFT		24
-
-/* N3M Clock control magic field values */
-#define	SSB_CHIPCO_CLK_F6_2		0x02		/* A factor of 2 in */
-#define	SSB_CHIPCO_CLK_F6_3		0x03		/* 6-bit fields like */
-#define	SSB_CHIPCO_CLK_F6_4		0x05		/* N1, M1 or M3 */
-#define	SSB_CHIPCO_CLK_F6_5		0x09
-#define	SSB_CHIPCO_CLK_F6_6		0x11
-#define	SSB_CHIPCO_CLK_F6_7		0x21
-
-#define	SSB_CHIPCO_CLK_F5_BIAS		5		/* 5-bit fields get this added */
-
-#define	SSB_CHIPCO_CLK_MC_BYPASS	0x08
-#define	SSB_CHIPCO_CLK_MC_M1		0x04
-#define	SSB_CHIPCO_CLK_MC_M1M2		0x02
-#define	SSB_CHIPCO_CLK_MC_M1M2M3	0x01
-#define	SSB_CHIPCO_CLK_MC_M1M3		0x11
-
-/* Type 2 Clock control magic field values */
-#define	SSB_CHIPCO_CLK_T2_BIAS		2		/* n1, n2, m1 & m3 bias */
-#define	SSB_CHIPCO_CLK_T2M2_BIAS	3		/* m2 bias */
-
-#define	SSB_CHIPCO_CLK_T2MC_M1BYP	1
-#define	SSB_CHIPCO_CLK_T2MC_M2BYP	2
-#define	SSB_CHIPCO_CLK_T2MC_M3BYP	4
-
-/* Type 6 Clock control magic field values */
-#define	SSB_CHIPCO_CLK_T6_MMASK		1		/* bits of interest in m */
-#define	SSB_CHIPCO_CLK_T6_M0		120000000	/* sb clock for m = 0 */
-#define	SSB_CHIPCO_CLK_T6_M1		100000000	/* sb clock for m = 1 */
-#define	SSB_CHIPCO_CLK_SB2MIPS_T6(sb)	(2 * (sb))
-
-/* Common clock base */
-#define	SSB_CHIPCO_CLK_BASE1		24000000	/* Half the clock freq */
-#define SSB_CHIPCO_CLK_BASE2		12500000	/* Alternate crystal on some PLL's */
-
-/* Clock control values for 200Mhz in 5350 */
-#define	SSB_CHIPCO_CLK_5350_N		0x0311
-#define	SSB_CHIPCO_CLK_5350_M		0x04020009
-
-
-/** Bits in the config registers **/
-
-#define	SSB_CHIPCO_CFG_EN		0x0001		/* Enable */
-#define	SSB_CHIPCO_CFG_EXTM		0x000E		/* Extif Mode */
-#define	 SSB_CHIPCO_CFG_EXTM_ASYNC	0x0002		/* Async/Parallel flash */
-#define	 SSB_CHIPCO_CFG_EXTM_SYNC	0x0004		/* Synchronous */
-#define	 SSB_CHIPCO_CFG_EXTM_PCMCIA	0x0008		/* PCMCIA */
-#define	 SSB_CHIPCO_CFG_EXTM_IDE	0x000A		/* IDE */
-#define	SSB_CHIPCO_CFG_DS16		0x0010		/* Data size, 0=8bit, 1=16bit */
-#define	SSB_CHIPCO_CFG_CLKDIV		0x0060		/* Sync: Clock divisor */
-#define	SSB_CHIPCO_CFG_CLKEN		0x0080		/* Sync: Clock enable */
-#define	SSB_CHIPCO_CFG_BSTRO		0x0100		/* Sync: Size/Bytestrobe */
-
-
-/** Flash-specific control/status values */
-
-/* flashcontrol opcodes for ST flashes */
-#define SSB_CHIPCO_FLASHCTL_ST_WREN	0x0006		/* Write Enable */
-#define SSB_CHIPCO_FLASHCTL_ST_WRDIS	0x0004		/* Write Disable */
-#define SSB_CHIPCO_FLASHCTL_ST_RDSR	0x0105		/* Read Status Register */
-#define SSB_CHIPCO_FLASHCTL_ST_WRSR	0x0101		/* Write Status Register */
-#define SSB_CHIPCO_FLASHCTL_ST_READ	0x0303		/* Read Data Bytes */
-#define SSB_CHIPCO_FLASHCTL_ST_PP	0x0302		/* Page Program */
-#define SSB_CHIPCO_FLASHCTL_ST_SE	0x02D8		/* Sector Erase */
-#define SSB_CHIPCO_FLASHCTL_ST_BE	0x00C7		/* Bulk Erase */
-#define SSB_CHIPCO_FLASHCTL_ST_DP	0x00B9		/* Deep Power-down */
-#define SSB_CHIPCO_FLASHCTL_ST_RSIG	0x03AB		/* Read Electronic Signature */
-
-/* Status register bits for ST flashes */
-#define SSB_CHIPCO_FLASHSTA_ST_WIP	0x01		/* Write In Progress */
-#define SSB_CHIPCO_FLASHSTA_ST_WEL	0x02		/* Write Enable Latch */
-#define SSB_CHIPCO_FLASHSTA_ST_BP	0x1C		/* Block Protect */
-#define SSB_CHIPCO_FLASHSTA_ST_BP_SHIFT	2
-#define SSB_CHIPCO_FLASHSTA_ST_SRWD	0x80		/* Status Register Write Disable */
-
-/* flashcontrol opcodes for Atmel flashes */
-#define SSB_CHIPCO_FLASHCTL_AT_READ		0x07E8
-#define SSB_CHIPCO_FLASHCTL_AT_PAGE_READ	0x07D2
-#define SSB_CHIPCO_FLASHCTL_AT_BUF1_READ	/* FIXME */
-#define SSB_CHIPCO_FLASHCTL_AT_BUF2_READ	/* FIXME */
-#define SSB_CHIPCO_FLASHCTL_AT_STATUS		0x01D7
-#define SSB_CHIPCO_FLASHCTL_AT_BUF1_WRITE	0x0384
-#define SSB_CHIPCO_FLASHCTL_AT_BUF2_WRITE	0x0387
-#define SSB_CHIPCO_FLASHCTL_AT_BUF1_ERASE_PRGM	0x0283	/* Erase program */
-#define SSB_CHIPCO_FLASHCTL_AT_BUF2_ERASE_PRGM	0x0286	/* Erase program */
-#define SSB_CHIPCO_FLASHCTL_AT_BUF1_PROGRAM	0x0288
-#define SSB_CHIPCO_FLASHCTL_AT_BUF2_PROGRAM	0x0289
-#define SSB_CHIPCO_FLASHCTL_AT_PAGE_ERASE	0x0281
-#define SSB_CHIPCO_FLASHCTL_AT_BLOCK_ERASE	0x0250
-#define SSB_CHIPCO_FLASHCTL_AT_BUF1_WRER_PRGM	0x0382	/* Write erase program */
-#define SSB_CHIPCO_FLASHCTL_AT_BUF2_WRER_PRGM	0x0385	/* Write erase program */
-#define SSB_CHIPCO_FLASHCTL_AT_BUF1_LOAD	0x0253
-#define SSB_CHIPCO_FLASHCTL_AT_BUF2_LOAD	0x0255
-#define SSB_CHIPCO_FLASHCTL_AT_BUF1_COMPARE	0x0260
-#define SSB_CHIPCO_FLASHCTL_AT_BUF2_COMPARE	0x0261
-#define SSB_CHIPCO_FLASHCTL_AT_BUF1_REPROGRAM	0x0258
-#define SSB_CHIPCO_FLASHCTL_AT_BUF2_REPROGRAM	0x0259
-
-/* Status register bits for Atmel flashes */
-#define SSB_CHIPCO_FLASHSTA_AT_READY	0x80
-#define SSB_CHIPCO_FLASHSTA_AT_MISMATCH	0x40
-#define SSB_CHIPCO_FLASHSTA_AT_ID	0x38
-#define SSB_CHIPCO_FLASHSTA_AT_ID_SHIFT	3
-
-
-/** OTP **/
-
-/* OTP regions */
-#define	SSB_CHIPCO_OTP_HW_REGION	SSB_CHIPCO_OTPS_HW_PROTECT
-#define	SSB_CHIPCO_OTP_SW_REGION	SSB_CHIPCO_OTPS_SW_PROTECT
-#define	SSB_CHIPCO_OTP_CID_REGION	SSB_CHIPCO_OTPS_CID_PROTECT
-
-/* OTP regions (Byte offsets from otp size) */
-#define	SSB_CHIPCO_OTP_SWLIM_OFF	(-8)
-#define	SSB_CHIPCO_OTP_CIDBASE_OFF	0
-#define	SSB_CHIPCO_OTP_CIDLIM_OFF	8
-
-/* Predefined OTP words (Word offset from otp size) */
-#define	SSB_CHIPCO_OTP_BOUNDARY_OFF	(-4)
-#define	SSB_CHIPCO_OTP_HWSIGN_OFF	(-3)
-#define	SSB_CHIPCO_OTP_SWSIGN_OFF	(-2)
-#define	SSB_CHIPCO_OTP_CIDSIGN_OFF	(-1)
-
-#define	SSB_CHIPCO_OTP_CID_OFF		0
-#define	SSB_CHIPCO_OTP_PKG_OFF		1
-#define	SSB_CHIPCO_OTP_FID_OFF		2
-#define	SSB_CHIPCO_OTP_RSV_OFF		3
-#define	SSB_CHIPCO_OTP_LIM_OFF		4
-
-#define	SSB_CHIPCO_OTP_SIGNATURE	0x578A
-#define	SSB_CHIPCO_OTP_MAGIC		0x4E56
-
-
-struct ssb_device;
-struct ssb_serial_port;
-
-/* Data for the PMU, if available.
- * Check availability with ((struct ssb_chipcommon)->capabilities & SSB_CHIPCO_CAP_PMU)
- */
-struct ssb_chipcommon_pmu {
-	u8 rev;			/* PMU revision */
-	u32 crystalfreq;	/* The active crystal frequency (in kHz) */
-};
-
-struct ssb_chipcommon {
-	struct ssb_device *dev;
-	u32 capabilities;
-	u32 status;
-	/* Fast Powerup Delay constant */
-	u16 fast_pwrup_delay;
-	struct ssb_chipcommon_pmu pmu;
-};
-
-static inline bool ssb_chipco_available(struct ssb_chipcommon *cc)
-{
-	return (cc->dev != NULL);
-}
-
-/* Register access */
-#define chipco_read32(cc, offset)	ssb_read32((cc)->dev, offset)
-#define chipco_write32(cc, offset, val)	ssb_write32((cc)->dev, offset, val)
-
-#define chipco_mask32(cc, offset, mask) \
-		chipco_write32(cc, offset, chipco_read32(cc, offset) & (mask))
-#define chipco_set32(cc, offset, set) \
-		chipco_write32(cc, offset, chipco_read32(cc, offset) | (set))
-#define chipco_maskset32(cc, offset, mask, set) \
-		chipco_write32(cc, offset, (chipco_read32(cc, offset) & (mask)) | (set))
-
-extern void ssb_chipcommon_init(struct ssb_chipcommon *cc);
-
-extern void ssb_chipco_suspend(struct ssb_chipcommon *cc);
-extern void ssb_chipco_resume(struct ssb_chipcommon *cc);
-
-extern void ssb_chipco_get_clockcpu(struct ssb_chipcommon *cc,
-                                    u32 *plltype, u32 *n, u32 *m);
-extern void ssb_chipco_get_clockcontrol(struct ssb_chipcommon *cc,
-					u32 *plltype, u32 *n, u32 *m);
-extern void ssb_chipco_timing_init(struct ssb_chipcommon *cc,
-				   unsigned long ns_per_cycle);
-
-enum ssb_clkmode {
-	SSB_CLKMODE_SLOW,
-	SSB_CLKMODE_FAST,
-	SSB_CLKMODE_DYNAMIC,
-};
-
-extern void ssb_chipco_set_clockmode(struct ssb_chipcommon *cc,
-				     enum ssb_clkmode mode);
-
-extern void ssb_chipco_watchdog_timer_set(struct ssb_chipcommon *cc,
-					  u32 ticks);
-
-void ssb_chipco_irq_mask(struct ssb_chipcommon *cc, u32 mask, u32 value);
-
-u32 ssb_chipco_irq_status(struct ssb_chipcommon *cc, u32 mask);
-
-/* Chipcommon GPIO pin access. */
-u32 ssb_chipco_gpio_in(struct ssb_chipcommon *cc, u32 mask);
-u32 ssb_chipco_gpio_out(struct ssb_chipcommon *cc, u32 mask, u32 value);
-u32 ssb_chipco_gpio_outen(struct ssb_chipcommon *cc, u32 mask, u32 value);
-u32 ssb_chipco_gpio_control(struct ssb_chipcommon *cc, u32 mask, u32 value);
-u32 ssb_chipco_gpio_intmask(struct ssb_chipcommon *cc, u32 mask, u32 value);
-u32 ssb_chipco_gpio_polarity(struct ssb_chipcommon *cc, u32 mask, u32 value);
-
-#ifdef CONFIG_SSB_SERIAL
-extern int ssb_chipco_serial_init(struct ssb_chipcommon *cc,
-				  struct ssb_serial_port *ports);
-#endif /* CONFIG_SSB_SERIAL */
-
-/* PMU support */
-extern void ssb_pmu_init(struct ssb_chipcommon *cc);
-
-enum ssb_pmu_ldo_volt_id {
-	LDO_PAREF = 0,
-	LDO_VOLT1,
-	LDO_VOLT2,
-	LDO_VOLT3,
-};
-
-void ssb_pmu_set_ldo_voltage(struct ssb_chipcommon *cc,
-			     enum ssb_pmu_ldo_volt_id id, u32 voltage);
-void ssb_pmu_set_ldo_paref(struct ssb_chipcommon *cc, bool on);
-
-#endif /* LINUX_SSB_CHIPCO_H_ */
diff --git a/ANDROID_3.4.5/include/linux/ssb/ssb_driver_extif.h b/ANDROID_3.4.5/include/linux/ssb/ssb_driver_extif.h
deleted file mode 100644
index 91161f0a..00000000
--- a/ANDROID_3.4.5/include/linux/ssb/ssb_driver_extif.h
+++ /dev/null
@@ -1,214 +0,0 @@
-/*
- * Hardware-specific External Interface I/O core definitions
- * for the BCM47xx family of SiliconBackplane-based chips.
- *
- * The External Interface core supports a total of three external chip selects
- * supporting external interfaces. One of the external chip selects is
- * used for Flash, one is used for PCMCIA, and the other may be
- * programmed to support either a synchronous interface or an
- * asynchronous interface. The asynchronous interface can be used to
- * support external devices such as UARTs and the BCM2019 Bluetooth
- * baseband processor.
- * The external interface core also contains 2 on-chip 16550 UARTs, clock
- * frequency control, a watchdog interrupt timer, and a GPIO interface.
- *
- * Copyright 2005, Broadcom Corporation
- * Copyright 2006, Michael Buesch
- *
- * Licensed under the GPL version 2. See COPYING for details.
- */
-#ifndef LINUX_SSB_EXTIFCORE_H_
-#define LINUX_SSB_EXTIFCORE_H_
-
-/* external interface address space */
-#define	SSB_EXTIF_PCMCIA_MEMBASE(x)	(x)
-#define	SSB_EXTIF_PCMCIA_IOBASE(x)	((x) + 0x100000)
-#define	SSB_EXTIF_PCMCIA_CFGBASE(x)	((x) + 0x200000)
-#define	SSB_EXTIF_CFGIF_BASE(x)		((x) + 0x800000)
-#define	SSB_EXTIF_FLASH_BASE(x)		((x) + 0xc00000)
-
-#define SSB_EXTIF_NR_GPIOOUT		5
-/* GPIO NOTE:
- * The multiple instances of output and output enable registers
- * are present to allow driver software for multiple cores to control
- * gpio outputs without needing to share a single register pair.
- * Use the following helper macro to get a register offset value.
- */
-#define SSB_EXTIF_GPIO_OUT(index)	({		\
-	BUILD_BUG_ON(index >= SSB_EXTIF_NR_GPIOOUT);	\
-	SSB_EXTIF_GPIO_OUT_BASE + ((index) * 8);	\
-					})
-#define SSB_EXTIF_GPIO_OUTEN(index)	({		\
-	BUILD_BUG_ON(index >= SSB_EXTIF_NR_GPIOOUT);	\
-	SSB_EXTIF_GPIO_OUTEN_BASE + ((index) * 8);	\
-					})
-
-/** EXTIF core registers **/
-
-#define SSB_EXTIF_CTL			0x0000
-#define  SSB_EXTIF_CTL_UARTEN		(1 << 0) /* UART enable */
-#define SSB_EXTIF_EXTSTAT		0x0004
-#define  SSB_EXTIF_EXTSTAT_EMODE	(1 << 0) /* Endian mode (ro) */
-#define  SSB_EXTIF_EXTSTAT_EIRQPIN	(1 << 1) /* External interrupt pin (ro) */
-#define  SSB_EXTIF_EXTSTAT_GPIOIRQPIN	(1 << 2) /* GPIO interrupt pin (ro) */
-#define SSB_EXTIF_PCMCIA_CFG		0x0010
-#define SSB_EXTIF_PCMCIA_MEMWAIT	0x0014
-#define SSB_EXTIF_PCMCIA_ATTRWAIT	0x0018
-#define SSB_EXTIF_PCMCIA_IOWAIT		0x001C
-#define SSB_EXTIF_PROG_CFG		0x0020
-#define SSB_EXTIF_PROG_WAITCNT		0x0024
-#define SSB_EXTIF_FLASH_CFG		0x0028
-#define SSB_EXTIF_FLASH_WAITCNT		0x002C
-#define SSB_EXTIF_WATCHDOG		0x0040
-#define SSB_EXTIF_CLOCK_N		0x0044
-#define SSB_EXTIF_CLOCK_SB		0x0048
-#define SSB_EXTIF_CLOCK_PCI		0x004C
-#define SSB_EXTIF_CLOCK_MII		0x0050
-#define SSB_EXTIF_GPIO_IN		0x0060
-#define SSB_EXTIF_GPIO_OUT_BASE		0x0064
-#define SSB_EXTIF_GPIO_OUTEN_BASE	0x0068
-#define SSB_EXTIF_EJTAG_OUTEN		0x0090
-#define SSB_EXTIF_GPIO_INTPOL		0x0094
-#define SSB_EXTIF_GPIO_INTMASK		0x0098
-#define SSB_EXTIF_UART_DATA		0x0300
-#define SSB_EXTIF_UART_TIMER		0x0310
-#define SSB_EXTIF_UART_FCR		0x0320
-#define SSB_EXTIF_UART_LCR		0x0330
-#define SSB_EXTIF_UART_MCR		0x0340
-#define SSB_EXTIF_UART_LSR		0x0350
-#define SSB_EXTIF_UART_MSR		0x0360
-#define SSB_EXTIF_UART_SCRATCH		0x0370
-
-
-
-
-/* pcmcia/prog/flash_config */
-#define	SSB_EXTCFG_EN			(1 << 0)	/* enable */
-#define	SSB_EXTCFG_MODE			0xE		/* mode */
-#define	SSB_EXTCFG_MODE_SHIFT		1
-#define	 SSB_EXTCFG_MODE_FLASH		0x0		/* flash/asynchronous mode */
-#define	 SSB_EXTCFG_MODE_SYNC		0x2		/* synchronous mode */
-#define	 SSB_EXTCFG_MODE_PCMCIA		0x4		/* pcmcia mode */
-#define	SSB_EXTCFG_DS16			(1 << 4)	/* destsize:  0=8bit, 1=16bit */
-#define	SSB_EXTCFG_BSWAP		(1 << 5)	/* byteswap */
-#define	SSB_EXTCFG_CLKDIV		0xC0		/* clock divider */
-#define	SSB_EXTCFG_CLKDIV_SHIFT		6
-#define	 SSB_EXTCFG_CLKDIV_2		0x0		/* backplane/2 */
-#define	 SSB_EXTCFG_CLKDIV_3		0x40		/* backplane/3 */
-#define	 SSB_EXTCFG_CLKDIV_4		0x80		/* backplane/4 */
-#define	SSB_EXTCFG_CLKEN		(1 << 8)	/* clock enable */
-#define	SSB_EXTCFG_STROBE		(1 << 9)	/* size/bytestrobe (synch only) */
-
-/* pcmcia_memwait */
-#define	SSB_PCMCIA_MEMW_0		0x0000003F	/* waitcount0 */
-#define	SSB_PCMCIA_MEMW_1		0x00001F00	/* waitcount1 */
-#define	SSB_PCMCIA_MEMW_1_SHIFT		8
-#define	SSB_PCMCIA_MEMW_2		0x001F0000	/* waitcount2 */
-#define	SSB_PCMCIA_MEMW_2_SHIFT		16
-#define	SSB_PCMCIA_MEMW_3		0x1F000000	/* waitcount3 */
-#define	SSB_PCMCIA_MEMW_3_SHIFT		24
-
-/* pcmcia_attrwait */
-#define	SSB_PCMCIA_ATTW_0		0x0000003F	/* waitcount0 */
-#define	SSB_PCMCIA_ATTW_1		0x00001F00	/* waitcount1 */
-#define	SSB_PCMCIA_ATTW_1_SHIFT		8
-#define	SSB_PCMCIA_ATTW_2		0x001F0000	/* waitcount2 */
-#define	SSB_PCMCIA_ATTW_2_SHIFT		16
-#define	SSB_PCMCIA_ATTW_3		0x1F000000	/* waitcount3 */
-#define	SSB_PCMCIA_ATTW_3_SHIFT		24
-
-/* pcmcia_iowait */
-#define	SSB_PCMCIA_IOW_0		0x0000003F	/* waitcount0 */
-#define	SSB_PCMCIA_IOW_1		0x00001F00	/* waitcount1 */
-#define	SSB_PCMCIA_IOW_1_SHIFT		8
-#define	SSB_PCMCIA_IOW_2		0x001F0000	/* waitcount2 */
-#define	SSB_PCMCIA_IOW_2_SHIFT		16
-#define	SSB_PCMCIA_IOW_3		0x1F000000	/* waitcount3 */
-#define	SSB_PCMCIA_IOW_3_SHIFT		24
-
-/* prog_waitcount */
-#define	SSB_PROG_WCNT_0			0x0000001F	/* waitcount0 */
-#define	SSB_PROG_WCNT_1			0x00001F00	/* waitcount1 */
-#define	SSB_PROG_WCNT_1_SHIFT		8
-#define	SSB_PROG_WCNT_2			0x001F0000	/* waitcount2 */
-#define	SSB_PROG_WCNT_2_SHIFT		16
-#define	SSB_PROG_WCNT_3			0x1F000000	/* waitcount3 */
-#define	SSB_PROG_WCNT_3_SHIFT		24
-
-#define SSB_PROG_W0			0x0000000C
-#define SSB_PROG_W1			0x00000A00
-#define SSB_PROG_W2			0x00020000
-#define SSB_PROG_W3			0x01000000
-
-/* flash_waitcount */
-#define	SSB_FLASH_WCNT_0		0x0000001F	/* waitcount0 */
-#define	SSB_FLASH_WCNT_1		0x00001F00	/* waitcount1 */
-#define	SSB_FLASH_WCNT_1_SHIFT		8
-#define	SSB_FLASH_WCNT_2		0x001F0000	/* waitcount2 */
-#define	SSB_FLASH_WCNT_2_SHIFT		16
-#define	SSB_FLASH_WCNT_3		0x1F000000	/* waitcount3 */
-#define	SSB_FLASH_WCNT_3_SHIFT		24
-
-/* watchdog */
-#define SSB_EXTIF_WATCHDOG_CLK		48000000	/* Hz */
-
-
-
-#ifdef CONFIG_SSB_DRIVER_EXTIF
-
-struct ssb_extif {
-	struct ssb_device *dev;
-};
-
-static inline bool ssb_extif_available(struct ssb_extif *extif)
-{
-	return (extif->dev != NULL);
-}
-
-extern void ssb_extif_get_clockcontrol(struct ssb_extif *extif,
-			               u32 *plltype, u32 *n, u32 *m);
-
-extern void ssb_extif_timing_init(struct ssb_extif *extif,
-				  unsigned long ns);
-
-extern void ssb_extif_watchdog_timer_set(struct ssb_extif *extif,
-					 u32 ticks);
-
-/* Extif GPIO pin access */
-u32 ssb_extif_gpio_in(struct ssb_extif *extif, u32 mask);
-u32 ssb_extif_gpio_out(struct ssb_extif *extif, u32 mask, u32 value);
-u32 ssb_extif_gpio_outen(struct ssb_extif *extif, u32 mask, u32 value);
-u32 ssb_extif_gpio_polarity(struct ssb_extif *extif, u32 mask, u32 value);
-u32 ssb_extif_gpio_intmask(struct ssb_extif *extif, u32 mask, u32 value);
-
-#ifdef CONFIG_SSB_SERIAL
-extern int ssb_extif_serial_init(struct ssb_extif *extif,
-				 struct ssb_serial_port *ports);
-#endif /* CONFIG_SSB_SERIAL */
-
-
-#else /* CONFIG_SSB_DRIVER_EXTIF */
-/* extif disabled */
-
-struct ssb_extif {
-};
-
-static inline bool ssb_extif_available(struct ssb_extif *extif)
-{
-	return 0;
-}
-
-static inline
-void ssb_extif_get_clockcontrol(struct ssb_extif *extif,
-			        u32 *plltype, u32 *n, u32 *m)
-{
-}
-
-static inline
-void ssb_extif_watchdog_timer_set(struct ssb_extif *extif,
-				  u32 ticks)
-{
-}
-
-#endif /* CONFIG_SSB_DRIVER_EXTIF */
-#endif /* LINUX_SSB_EXTIFCORE_H_ */
diff --git a/ANDROID_3.4.5/include/linux/ssb/ssb_driver_gige.h b/ANDROID_3.4.5/include/linux/ssb/ssb_driver_gige.h
deleted file mode 100644
index 6b05dcd9..00000000
--- a/ANDROID_3.4.5/include/linux/ssb/ssb_driver_gige.h
+++ /dev/null
@@ -1,180 +0,0 @@
-#ifndef LINUX_SSB_DRIVER_GIGE_H_
-#define LINUX_SSB_DRIVER_GIGE_H_
-
-#include <linux/ssb/ssb.h>
-#include <linux/bug.h>
-#include <linux/pci.h>
-#include <linux/spinlock.h>
-
-
-#ifdef CONFIG_SSB_DRIVER_GIGE
-
-
-#define SSB_GIGE_PCIIO			0x0000 /* PCI I/O Registers (1024 bytes) */
-#define SSB_GIGE_RESERVED		0x0400 /* Reserved (1024 bytes) */
-#define SSB_GIGE_PCICFG			0x0800 /* PCI config space (256 bytes) */
-#define SSB_GIGE_SHIM_FLUSHSTAT		0x0C00 /* PCI to OCP: Flush status control (32bit) */
-#define SSB_GIGE_SHIM_FLUSHRDA		0x0C04 /* PCI to OCP: Flush read address (32bit) */
-#define SSB_GIGE_SHIM_FLUSHTO		0x0C08 /* PCI to OCP: Flush timeout counter (32bit) */
-#define SSB_GIGE_SHIM_BARRIER		0x0C0C /* PCI to OCP: Barrier register (32bit) */
-#define SSB_GIGE_SHIM_MAOCPSI		0x0C10 /* PCI to OCP: MaocpSI Control (32bit) */
-#define SSB_GIGE_SHIM_SIOCPMA		0x0C14 /* PCI to OCP: SiocpMa Control (32bit) */
-
-/* TM Status High flags */
-#define SSB_GIGE_TMSHIGH_RGMII		0x00010000 /* Have an RGMII PHY-bus */
-/* TM Status Low flags */
-#define SSB_GIGE_TMSLOW_TXBYPASS	0x00080000 /* TX bypass (no delay) */
-#define SSB_GIGE_TMSLOW_RXBYPASS	0x00100000 /* RX bypass (no delay) */
-#define SSB_GIGE_TMSLOW_DLLEN		0x01000000 /* Enable DLL controls */
-
-/* Boardflags (low) */
-#define SSB_GIGE_BFL_ROBOSWITCH		0x0010
-
-
-#define SSB_GIGE_MEM_RES_NAME		"SSB Broadcom 47xx GigE memory"
-#define SSB_GIGE_IO_RES_NAME		"SSB Broadcom 47xx GigE I/O"
-
-struct ssb_gige {
-	struct ssb_device *dev;
-
-	spinlock_t lock;
-
-	/* True, if the device has an RGMII bus.
-	 * False, if the device has a GMII bus. */
-	bool has_rgmii;
-
-	/* The PCI controller device. */
-	struct pci_controller pci_controller;
-	struct pci_ops pci_ops;
-	struct resource mem_resource;
-	struct resource io_resource;
-};
-
-/* Check whether a PCI device is a SSB Gigabit Ethernet core. */
-extern bool pdev_is_ssb_gige_core(struct pci_dev *pdev);
-
-/* Convert a pci_dev pointer to a ssb_gige pointer. */
-static inline struct ssb_gige * pdev_to_ssb_gige(struct pci_dev *pdev)
-{
-	if (!pdev_is_ssb_gige_core(pdev))
-		return NULL;
-	return container_of(pdev->bus->ops, struct ssb_gige, pci_ops);
-}
-
-/* Returns whether the PHY is connected by an RGMII bus. */
-static inline bool ssb_gige_is_rgmii(struct pci_dev *pdev)
-{
-	struct ssb_gige *dev = pdev_to_ssb_gige(pdev);
-	return (dev ? dev->has_rgmii : 0);
-}
-
-/* Returns whether we have a Roboswitch. */
-static inline bool ssb_gige_have_roboswitch(struct pci_dev *pdev)
-{
-	struct ssb_gige *dev = pdev_to_ssb_gige(pdev);
-	if (dev)
-		return !!(dev->dev->bus->sprom.boardflags_lo &
-			  SSB_GIGE_BFL_ROBOSWITCH);
-	return 0;
-}
-
-/* Returns whether we can only do one DMA at once. */
-static inline bool ssb_gige_one_dma_at_once(struct pci_dev *pdev)
-{
-	struct ssb_gige *dev = pdev_to_ssb_gige(pdev);
-	if (dev)
-		return ((dev->dev->bus->chip_id == 0x4785) &&
-			(dev->dev->bus->chip_rev < 2));
-	return 0;
-}
-
-/* Returns whether we must flush posted writes. */
-static inline bool ssb_gige_must_flush_posted_writes(struct pci_dev *pdev)
-{
-	struct ssb_gige *dev = pdev_to_ssb_gige(pdev);
-	if (dev)
-		return (dev->dev->bus->chip_id == 0x4785);
-	return 0;
-}
-
-#ifdef CONFIG_BCM47XX
-#include <asm/mach-bcm47xx/nvram.h>
-/* Get the device MAC address */
-static inline void ssb_gige_get_macaddr(struct pci_dev *pdev, u8 *macaddr)
-{
-	char buf[20];
-	if (nvram_getenv("et0macaddr", buf, sizeof(buf)) < 0)
-		return;
-	nvram_parse_macaddr(buf, macaddr);
-}
-#else
-static inline void ssb_gige_get_macaddr(struct pci_dev *pdev, u8 *macaddr)
-{
-}
-#endif
-
-extern int ssb_gige_pcibios_plat_dev_init(struct ssb_device *sdev,
-					  struct pci_dev *pdev);
-extern int ssb_gige_map_irq(struct ssb_device *sdev,
-			    const struct pci_dev *pdev);
-
-/* The GigE driver is not a standalone module, because we don't have support
- * for unregistering the driver. So we could not unload the module anyway. */
-extern int ssb_gige_init(void);
-static inline void ssb_gige_exit(void)
-{
-	/* Currently we can not unregister the GigE driver,
-	 * because we can not unregister the PCI bridge. */
-	BUG();
-}
-
-
-#else /* CONFIG_SSB_DRIVER_GIGE */
-/* Gigabit Ethernet driver disabled */
-
-
-static inline int ssb_gige_pcibios_plat_dev_init(struct ssb_device *sdev,
-						 struct pci_dev *pdev)
-{
-	return -ENOSYS;
-}
-static inline int ssb_gige_map_irq(struct ssb_device *sdev,
-				   const struct pci_dev *pdev)
-{
-	return -ENOSYS;
-}
-static inline int ssb_gige_init(void)
-{
-	return 0;
-}
-static inline void ssb_gige_exit(void)
-{
-}
-
-static inline bool pdev_is_ssb_gige_core(struct pci_dev *pdev)
-{
-	return 0;
-}
-static inline struct ssb_gige * pdev_to_ssb_gige(struct pci_dev *pdev)
-{
-	return NULL;
-}
-static inline bool ssb_gige_is_rgmii(struct pci_dev *pdev)
-{
-	return 0;
-}
-static inline bool ssb_gige_have_roboswitch(struct pci_dev *pdev)
-{
-	return 0;
-}
-static inline bool ssb_gige_one_dma_at_once(struct pci_dev *pdev)
-{
-	return 0;
-}
-static inline bool ssb_gige_must_flush_posted_writes(struct pci_dev *pdev)
-{
-	return 0;
-}
-
-#endif /* CONFIG_SSB_DRIVER_GIGE */
-#endif /* LINUX_SSB_DRIVER_GIGE_H_ */
diff --git a/ANDROID_3.4.5/include/linux/ssb/ssb_driver_mips.h b/ANDROID_3.4.5/include/linux/ssb/ssb_driver_mips.h
deleted file mode 100644
index 5f44e974..00000000
--- a/ANDROID_3.4.5/include/linux/ssb/ssb_driver_mips.h
+++ /dev/null
@@ -1,46 +0,0 @@
-#ifndef LINUX_SSB_MIPSCORE_H_
-#define LINUX_SSB_MIPSCORE_H_
-
-#ifdef CONFIG_SSB_DRIVER_MIPS
-
-struct ssb_device;
-
-struct ssb_serial_port {
-	void *regs;
-	unsigned long clockspeed;
-	unsigned int irq;
-	unsigned int baud_base;
-	unsigned int reg_shift;
-};
-
-
-struct ssb_mipscore {
-	struct ssb_device *dev;
-
-	int nr_serial_ports;
-	struct ssb_serial_port serial_ports[4];
-
-	u8 flash_buswidth;
-	u32 flash_window;
-	u32 flash_window_size;
-};
-
-extern void ssb_mipscore_init(struct ssb_mipscore *mcore);
-extern u32 ssb_cpu_clock(struct ssb_mipscore *mcore);
-
-extern unsigned int ssb_mips_irq(struct ssb_device *dev);
-
-
-#else /* CONFIG_SSB_DRIVER_MIPS */
-
-struct ssb_mipscore {
-};
-
-static inline
-void ssb_mipscore_init(struct ssb_mipscore *mcore)
-{
-}
-
-#endif /* CONFIG_SSB_DRIVER_MIPS */
-
-#endif /* LINUX_SSB_MIPSCORE_H_ */
diff --git a/ANDROID_3.4.5/include/linux/ssb/ssb_driver_pci.h b/ANDROID_3.4.5/include/linux/ssb/ssb_driver_pci.h
deleted file mode 100644
index 41e330e5..00000000
--- a/ANDROID_3.4.5/include/linux/ssb/ssb_driver_pci.h
+++ /dev/null
@@ -1,130 +0,0 @@
-#ifndef LINUX_SSB_PCICORE_H_
-#define LINUX_SSB_PCICORE_H_
-
-#include <linux/types.h>
-
-struct pci_dev;
-
-
-#ifdef CONFIG_SSB_DRIVER_PCICORE
-
-/* PCI core registers. */
-#define SSB_PCICORE_CTL			0x0000	/* PCI Control */
-#define  SSB_PCICORE_CTL_RST_OE		0x00000001 /* PCI_RESET Output Enable */
-#define  SSB_PCICORE_CTL_RST		0x00000002 /* PCI_RESET driven out to pin */
-#define  SSB_PCICORE_CTL_CLK_OE		0x00000004 /* Clock gate Output Enable */
-#define  SSB_PCICORE_CTL_CLK		0x00000008 /* Gate for clock driven out to pin */
-#define SSB_PCICORE_ARBCTL		0x0010	/* PCI Arbiter Control */
-#define  SSB_PCICORE_ARBCTL_INTERN	0x00000001 /* Use internal arbiter */
-#define  SSB_PCICORE_ARBCTL_EXTERN	0x00000002 /* Use external arbiter */
-#define  SSB_PCICORE_ARBCTL_PARKID	0x00000006 /* Mask, selects which agent is parked on an idle bus */
-#define   SSB_PCICORE_ARBCTL_PARKID_LAST	0x00000000 /* Last requestor */
-#define   SSB_PCICORE_ARBCTL_PARKID_4710	0x00000002 /* 4710 */
-#define   SSB_PCICORE_ARBCTL_PARKID_EXT0	0x00000004 /* External requestor 0 */
-#define   SSB_PCICORE_ARBCTL_PARKID_EXT1	0x00000006 /* External requestor 1 */
-#define SSB_PCICORE_ISTAT		0x0020	/* Interrupt status */
-#define  SSB_PCICORE_ISTAT_INTA		0x00000001 /* PCI INTA# */
-#define  SSB_PCICORE_ISTAT_INTB		0x00000002 /* PCI INTB# */
-#define  SSB_PCICORE_ISTAT_SERR		0x00000004 /* PCI SERR# (write to clear) */
-#define  SSB_PCICORE_ISTAT_PERR		0x00000008 /* PCI PERR# (write to clear) */
-#define  SSB_PCICORE_ISTAT_PME		0x00000010 /* PCI PME# */
-#define SSB_PCICORE_IMASK		0x0024	/* Interrupt mask */
-#define  SSB_PCICORE_IMASK_INTA		0x00000001 /* PCI INTA# */
-#define  SSB_PCICORE_IMASK_INTB		0x00000002 /* PCI INTB# */
-#define  SSB_PCICORE_IMASK_SERR		0x00000004 /* PCI SERR# */
-#define  SSB_PCICORE_IMASK_PERR		0x00000008 /* PCI PERR# */
-#define  SSB_PCICORE_IMASK_PME		0x00000010 /* PCI PME# */
-#define SSB_PCICORE_MBOX		0x0028	/* Backplane to PCI Mailbox */
-#define  SSB_PCICORE_MBOX_F0_0		0x00000100 /* PCI function 0, INT 0 */
-#define  SSB_PCICORE_MBOX_F0_1		0x00000200 /* PCI function 0, INT 1 */
-#define  SSB_PCICORE_MBOX_F1_0		0x00000400 /* PCI function 1, INT 0 */
-#define  SSB_PCICORE_MBOX_F1_1		0x00000800 /* PCI function 1, INT 1 */
-#define  SSB_PCICORE_MBOX_F2_0		0x00001000 /* PCI function 2, INT 0 */
-#define  SSB_PCICORE_MBOX_F2_1		0x00002000 /* PCI function 2, INT 1 */
-#define  SSB_PCICORE_MBOX_F3_0		0x00004000 /* PCI function 3, INT 0 */
-#define  SSB_PCICORE_MBOX_F3_1		0x00008000 /* PCI function 3, INT 1 */
-#define SSB_PCICORE_BCAST_ADDR		0x0050	/* Backplane Broadcast Address */
-#define  SSB_PCICORE_BCAST_ADDR_MASK	0x000000FF
-#define SSB_PCICORE_BCAST_DATA		0x0054	/* Backplane Broadcast Data */
-#define SSB_PCICORE_GPIO_IN		0x0060	/* rev >= 2 only */
-#define SSB_PCICORE_GPIO_OUT		0x0064	/* rev >= 2 only */
-#define SSB_PCICORE_GPIO_ENABLE		0x0068	/* rev >= 2 only */
-#define SSB_PCICORE_GPIO_CTL		0x006C	/* rev >= 2 only */
-#define SSB_PCICORE_SBTOPCI0		0x0100	/* Backplane to PCI translation 0 (sbtopci0) */
-#define  SSB_PCICORE_SBTOPCI0_MASK	0xFC000000
-#define SSB_PCICORE_SBTOPCI1		0x0104	/* Backplane to PCI translation 1 (sbtopci1) */
-#define  SSB_PCICORE_SBTOPCI1_MASK	0xFC000000
-#define SSB_PCICORE_SBTOPCI2		0x0108	/* Backplane to PCI translation 2 (sbtopci2) */
-#define  SSB_PCICORE_SBTOPCI2_MASK	0xC0000000
-#define SSB_PCICORE_PCICFG0		0x0400	/* PCI config space 0 (rev >= 8) */
-#define SSB_PCICORE_PCICFG1		0x0500	/* PCI config space 1 (rev >= 8) */
-#define SSB_PCICORE_PCICFG2		0x0600	/* PCI config space 2 (rev >= 8) */
-#define SSB_PCICORE_PCICFG3		0x0700	/* PCI config space 3 (rev >= 8) */
-#define SSB_PCICORE_SPROM(wordoffset)	(0x0800 + ((wordoffset) * 2)) /* SPROM shadow area (72 bytes) */
-
-/* SBtoPCIx */
-#define SSB_PCICORE_SBTOPCI_MEM		0x00000000
-#define SSB_PCICORE_SBTOPCI_IO		0x00000001
-#define SSB_PCICORE_SBTOPCI_CFG0	0x00000002
-#define SSB_PCICORE_SBTOPCI_CFG1	0x00000003
-#define SSB_PCICORE_SBTOPCI_PREF	0x00000004 /* Prefetch enable */
-#define SSB_PCICORE_SBTOPCI_BURST	0x00000008 /* Burst enable */
-#define SSB_PCICORE_SBTOPCI_MRM		0x00000020 /* Memory Read Multiple */
-#define SSB_PCICORE_SBTOPCI_RC		0x00000030 /* Read Command mask (rev >= 11) */
-#define  SSB_PCICORE_SBTOPCI_RC_READ	0x00000000 /* Memory read */
-#define  SSB_PCICORE_SBTOPCI_RC_READL	0x00000010 /* Memory read line */
-#define  SSB_PCICORE_SBTOPCI_RC_READM	0x00000020 /* Memory read multiple */
-
-
-/* PCIcore specific boardflags */
-#define SSB_PCICORE_BFL_NOPCI		0x00000400 /* Board leaves PCI floating */
-
-
-struct ssb_pcicore {
-	struct ssb_device *dev;
-	u8 setup_done:1;
-	u8 hostmode:1;
-	u8 cardbusmode:1;
-};
-
-extern void ssb_pcicore_init(struct ssb_pcicore *pc);
-
-/* Enable IRQ routing for a specific device */
-extern int ssb_pcicore_dev_irqvecs_enable(struct ssb_pcicore *pc,
-					  struct ssb_device *dev);
-
-int ssb_pcicore_plat_dev_init(struct pci_dev *d);
-int ssb_pcicore_pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin);
-
-
-#else /* CONFIG_SSB_DRIVER_PCICORE */
-
-
-struct ssb_pcicore {
-};
-
-static inline
-void ssb_pcicore_init(struct ssb_pcicore *pc)
-{
-}
-
-static inline
-int ssb_pcicore_dev_irqvecs_enable(struct ssb_pcicore *pc,
-				   struct ssb_device *dev)
-{
-	return 0;
-}
-
-static inline
-int ssb_pcicore_plat_dev_init(struct pci_dev *d)
-{
-	return -ENODEV;
-}
-static inline
-int ssb_pcicore_pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	return -ENODEV;
-}
-
-#endif /* CONFIG_SSB_DRIVER_PCICORE */
-#endif /* LINUX_SSB_PCICORE_H_ */
diff --git a/ANDROID_3.4.5/include/linux/ssb/ssb_embedded.h b/ANDROID_3.4.5/include/linux/ssb/ssb_embedded.h
deleted file mode 100644
index 8d8dedff..00000000
--- a/ANDROID_3.4.5/include/linux/ssb/ssb_embedded.h
+++ /dev/null
@@ -1,18 +0,0 @@
-#ifndef LINUX_SSB_EMBEDDED_H_
-#define LINUX_SSB_EMBEDDED_H_
-
-#include <linux/types.h>
-#include <linux/ssb/ssb.h>
-
-
-extern int ssb_watchdog_timer_set(struct ssb_bus *bus, u32 ticks);
-
-/* Generic GPIO API */
-u32 ssb_gpio_in(struct ssb_bus *bus, u32 mask);
-u32 ssb_gpio_out(struct ssb_bus *bus, u32 mask, u32 value);
-u32 ssb_gpio_outen(struct ssb_bus *bus, u32 mask, u32 value);
-u32 ssb_gpio_control(struct ssb_bus *bus, u32 mask, u32 value);
-u32 ssb_gpio_intmask(struct ssb_bus *bus, u32 mask, u32 value);
-u32 ssb_gpio_polarity(struct ssb_bus *bus, u32 mask, u32 value);
-
-#endif /* LINUX_SSB_EMBEDDED_H_ */
diff --git a/ANDROID_3.4.5/include/linux/ssb/ssb_regs.h b/ANDROID_3.4.5/include/linux/ssb/ssb_regs.h
deleted file mode 100644
index 40b1ef85..00000000
--- a/ANDROID_3.4.5/include/linux/ssb/ssb_regs.h
+++ /dev/null
@@ -1,594 +0,0 @@
-#ifndef LINUX_SSB_REGS_H_
-#define LINUX_SSB_REGS_H_
-
-
-/* SiliconBackplane Address Map.
- * All regions may not exist on all chips.
- */
-#define SSB_SDRAM_BASE		0x00000000U	/* Physical SDRAM */
-#define SSB_PCI_MEM		0x08000000U	/* Host Mode sb2pcitranslation0 (64 MB) */
-#define SSB_PCI_CFG		0x0c000000U	/* Host Mode sb2pcitranslation1 (64 MB) */
-#define	SSB_SDRAM_SWAPPED	0x10000000U	/* Byteswapped Physical SDRAM */
-#define SSB_ENUM_BASE    	0x18000000U	/* Enumeration space base */
-#define	SSB_ENUM_LIMIT		0x18010000U	/* Enumeration space limit */
-
-#define	SSB_FLASH2		0x1c000000U	/* Flash Region 2 (region 1 shadowed here) */
-#define	SSB_FLASH2_SZ		0x02000000U	/* Size of Flash Region 2 */
-
-#define	SSB_EXTIF_BASE		0x1f000000U	/* External Interface region base address */
-#define	SSB_FLASH1		0x1fc00000U	/* Flash Region 1 */
-#define	SSB_FLASH1_SZ		0x00400000U	/* Size of Flash Region 1 */
-
-#define SSB_PCI_DMA		0x40000000U	/* Client Mode sb2pcitranslation2 (1 GB) */
-#define SSB_PCI_DMA_SZ		0x40000000U	/* Client Mode sb2pcitranslation2 size in bytes */
-#define SSB_PCIE_DMA_L32	0x00000000U	/* PCIE Client Mode sb2pcitranslation2 (2 ZettaBytes), low 32 bits */
-#define SSB_PCIE_DMA_H32	0x80000000U	/* PCIE Client Mode sb2pcitranslation2 (2 ZettaBytes), high 32 bits */
-#define	SSB_EUART		(SSB_EXTIF_BASE + 0x00800000)
-#define	SSB_LED			(SSB_EXTIF_BASE + 0x00900000)
-
-
-/* Enumeration space constants */
-#define SSB_CORE_SIZE		0x1000	/* Size of a core MMIO area */
-#define SSB_MAX_NR_CORES	((SSB_ENUM_LIMIT - SSB_ENUM_BASE) / SSB_CORE_SIZE)
-
-
-/* mips address */
-#define	SSB_EJTAG		0xff200000	/* MIPS EJTAG space (2M) */
-
-
-/* SSB PCI config space registers. */
-#define SSB_PMCSR		0x44
-#define  SSB_PE			0x100
-#define	SSB_BAR0_WIN		0x80	/* Backplane address space 0 */
-#define	SSB_BAR1_WIN		0x84	/* Backplane address space 1 */
-#define	SSB_SPROMCTL		0x88	/* SPROM control */
-#define  SSB_SPROMCTL_WE	0x10	/* SPROM write enable */
-#define	SSB_BAR1_CONTROL	0x8c	/* Address space 1 burst control */
-#define SSB_PCI_IRQS		0x90	/* PCI interrupts */
-#define SSB_PCI_IRQMASK		0x94	/* PCI IRQ control and mask (pcirev >= 6 only) */
-#define SSB_BACKPLANE_IRQS	0x98	/* Backplane Interrupts */
-#define SSB_GPIO_IN		0xB0	/* GPIO Input (pcirev >= 3 only) */
-#define SSB_GPIO_OUT		0xB4	/* GPIO Output (pcirev >= 3 only) */
-#define SSB_GPIO_OUT_ENABLE	0xB8	/* GPIO Output Enable/Disable (pcirev >= 3 only) */
-#define  SSB_GPIO_SCS		0x10	/* PCI config space bit 4 for 4306c0 slow clock source */
-#define  SSB_GPIO_HWRAD		0x20	/* PCI config space GPIO 13 for hw radio disable */
-#define  SSB_GPIO_XTAL		0x40	/* PCI config space GPIO 14 for Xtal powerup */
-#define  SSB_GPIO_PLL		0x80	/* PCI config space GPIO 15 for PLL powerdown */
-
-
-#define SSB_BAR0_MAX_RETRIES	50
-
-/* Silicon backplane configuration register definitions */
-#define SSB_IPSFLAG		0x0F08
-#define	 SSB_IPSFLAG_IRQ1	0x0000003F /* which sbflags get routed to mips interrupt 1 */
-#define	 SSB_IPSFLAG_IRQ1_SHIFT	0
-#define	 SSB_IPSFLAG_IRQ2	0x00003F00 /* which sbflags get routed to mips interrupt 2 */
-#define	 SSB_IPSFLAG_IRQ2_SHIFT	8
-#define	 SSB_IPSFLAG_IRQ3	0x003F0000 /* which sbflags get routed to mips interrupt 3 */
-#define	 SSB_IPSFLAG_IRQ3_SHIFT	16
-#define	 SSB_IPSFLAG_IRQ4	0x3F000000 /* which sbflags get routed to mips interrupt 4 */
-#define	 SSB_IPSFLAG_IRQ4_SHIFT	24
-#define SSB_TPSFLAG		0x0F18
-#define  SSB_TPSFLAG_BPFLAG	0x0000003F /* Backplane flag # */
-#define  SSB_TPSFLAG_ALWAYSIRQ	0x00000040 /* IRQ is always sent on the Backplane */
-#define SSB_TMERRLOGA		0x0F48
-#define SSB_TMERRLOG		0x0F50
-#define SSB_ADMATCH3		0x0F60
-#define SSB_ADMATCH2		0x0F68
-#define SSB_ADMATCH1		0x0F70
-#define SSB_IMSTATE		0x0F90     /* SB Initiator Agent State */
-#define  SSB_IMSTATE_PC		0x0000000f /* Pipe Count */
-#define  SSB_IMSTATE_AP_MASK	0x00000030 /* Arbitration Priority */
-#define  SSB_IMSTATE_AP_BOTH	0x00000000 /* Use both timeslices and token */
-#define  SSB_IMSTATE_AP_TS	0x00000010 /* Use timeslices only */
-#define  SSB_IMSTATE_AP_TK	0x00000020 /* Use token only */
-#define  SSB_IMSTATE_AP_RSV	0x00000030 /* Reserved */
-#define  SSB_IMSTATE_IBE	0x00020000 /* In Band Error */
-#define  SSB_IMSTATE_TO		0x00040000 /* Timeout */
-#define  SSB_IMSTATE_BUSY	0x01800000 /* Busy (Backplane rev >= 2.3 only) */
-#define  SSB_IMSTATE_REJECT	0x02000000 /* Reject (Backplane rev >= 2.3 only) */
-#define SSB_INTVEC		0x0F94     /* SB Interrupt Mask */
-#define  SSB_INTVEC_PCI		0x00000001 /* Enable interrupts for PCI */
-#define  SSB_INTVEC_ENET0	0x00000002 /* Enable interrupts for enet 0 */
-#define  SSB_INTVEC_ILINE20	0x00000004 /* Enable interrupts for iline20 */
-#define  SSB_INTVEC_CODEC	0x00000008 /* Enable interrupts for v90 codec */
-#define  SSB_INTVEC_USB		0x00000010 /* Enable interrupts for usb */
-#define  SSB_INTVEC_EXTIF	0x00000020 /* Enable interrupts for external i/f */
-#define  SSB_INTVEC_ENET1	0x00000040 /* Enable interrupts for enet 1 */
-#define SSB_TMSLOW		0x0F98     /* SB Target State Low */
-#define  SSB_TMSLOW_RESET	0x00000001 /* Reset */
-#define  SSB_TMSLOW_REJECT	0x00000002 /* Reject (Standard Backplane) */
-#define  SSB_TMSLOW_REJECT_23	0x00000004 /* Reject (Backplane rev 2.3) */
-#define  SSB_TMSLOW_CLOCK	0x00010000 /* Clock Enable */
-#define  SSB_TMSLOW_FGC		0x00020000 /* Force Gated Clocks On */
-#define  SSB_TMSLOW_PE		0x40000000 /* Power Management Enable */
-#define  SSB_TMSLOW_BE		0x80000000 /* BIST Enable */
-#define SSB_TMSHIGH		0x0F9C     /* SB Target State High */
-#define  SSB_TMSHIGH_SERR	0x00000001 /* S-error */
-#define  SSB_TMSHIGH_INT	0x00000002 /* Interrupt */
-#define  SSB_TMSHIGH_BUSY	0x00000004 /* Busy */
-#define  SSB_TMSHIGH_TO		0x00000020 /* Timeout. Backplane rev >= 2.3 only */
-#define  SSB_TMSHIGH_COREFL	0x1FFF0000 /* Core specific flags */
-#define  SSB_TMSHIGH_COREFL_SHIFT	16
-#define  SSB_TMSHIGH_DMA64	0x10000000 /* 64bit DMA supported */
-#define  SSB_TMSHIGH_GCR	0x20000000 /* Gated Clock Request */
-#define  SSB_TMSHIGH_BISTF	0x40000000 /* BIST Failed */
-#define  SSB_TMSHIGH_BISTD	0x80000000 /* BIST Done */
-#define SSB_BWA0		0x0FA0
-#define SSB_IMCFGLO		0x0FA8
-#define  SSB_IMCFGLO_SERTO	0x00000007 /* Service timeout */
-#define  SSB_IMCFGLO_REQTO	0x00000070 /* Request timeout */
-#define  SSB_IMCFGLO_REQTO_SHIFT	4
-#define  SSB_IMCFGLO_CONNID	0x00FF0000 /* Connection ID */
-#define  SSB_IMCFGLO_CONNID_SHIFT	16
-#define SSB_IMCFGHI		0x0FAC
-#define SSB_ADMATCH0		0x0FB0
-#define SSB_TMCFGLO		0x0FB8
-#define SSB_TMCFGHI		0x0FBC
-#define SSB_BCONFIG		0x0FC0
-#define SSB_BSTATE		0x0FC8
-#define SSB_ACTCFG		0x0FD8
-#define SSB_FLAGST		0x0FE8
-#define SSB_IDLOW		0x0FF8
-#define  SSB_IDLOW_CFGSP	0x00000003 /* Config Space */
-#define  SSB_IDLOW_ADDRNGE	0x00000038 /* Address Ranges supported */
-#define  SSB_IDLOW_ADDRNGE_SHIFT	3
-#define  SSB_IDLOW_SYNC		0x00000040
-#define  SSB_IDLOW_INITIATOR	0x00000080
-#define  SSB_IDLOW_MIBL		0x00000F00 /* Minimum Backplane latency */
-#define  SSB_IDLOW_MIBL_SHIFT	8
-#define  SSB_IDLOW_MABL		0x0000F000 /* Maximum Backplane latency */
-#define  SSB_IDLOW_MABL_SHIFT	12
-#define  SSB_IDLOW_TIF		0x00010000 /* This Initiator is first */
-#define  SSB_IDLOW_CCW		0x000C0000 /* Cycle counter width */
-#define  SSB_IDLOW_CCW_SHIFT	18
-#define  SSB_IDLOW_TPT		0x00F00000 /* Target ports */
-#define  SSB_IDLOW_TPT_SHIFT	20
-#define  SSB_IDLOW_INITP	0x0F000000 /* Initiator ports */
-#define  SSB_IDLOW_INITP_SHIFT	24
-#define  SSB_IDLOW_SSBREV	0xF0000000 /* Sonics Backplane Revision code */
-#define  SSB_IDLOW_SSBREV_22	0x00000000 /* <= 2.2 */
-#define  SSB_IDLOW_SSBREV_23	0x10000000 /* 2.3 */
-#define  SSB_IDLOW_SSBREV_24	0x40000000 /* ?? Found in BCM4328 */
-#define  SSB_IDLOW_SSBREV_25	0x50000000 /* ?? Not Found yet */
-#define  SSB_IDLOW_SSBREV_26	0x60000000 /* ?? Found in some BCM4311/2 */
-#define  SSB_IDLOW_SSBREV_27	0x70000000 /* ?? Found in some BCM4311/2 */
-#define SSB_IDHIGH		0x0FFC     /* SB Identification High */
-#define  SSB_IDHIGH_RCLO	0x0000000F /* Revision Code (low part) */
-#define  SSB_IDHIGH_CC		0x00008FF0 /* Core Code */
-#define  SSB_IDHIGH_CC_SHIFT	4
-#define  SSB_IDHIGH_RCHI	0x00007000 /* Revision Code (high part) */
-#define  SSB_IDHIGH_RCHI_SHIFT	8	   /* yes, shift 8 is right */
-#define  SSB_IDHIGH_VC		0xFFFF0000 /* Vendor Code */
-#define  SSB_IDHIGH_VC_SHIFT	16
-
-/* SPROM shadow area. If not otherwise noted, fields are
- * two bytes wide. Note that the SPROM can _only_ be read
- * in two-byte quantities.
- */
-#define SSB_SPROMSIZE_WORDS		64
-#define SSB_SPROMSIZE_BYTES		(SSB_SPROMSIZE_WORDS * sizeof(u16))
-#define SSB_SPROMSIZE_WORDS_R123	64
-#define SSB_SPROMSIZE_WORDS_R4		220
-#define SSB_SPROMSIZE_BYTES_R123	(SSB_SPROMSIZE_WORDS_R123 * sizeof(u16))
-#define SSB_SPROMSIZE_BYTES_R4		(SSB_SPROMSIZE_WORDS_R4 * sizeof(u16))
-#define SSB_SPROM_BASE1			0x1000
-#define SSB_SPROM_BASE31		0x0800
-#define SSB_SPROM_REVISION		0x007E
-#define  SSB_SPROM_REVISION_REV		0x00FF	/* SPROM Revision number */
-#define  SSB_SPROM_REVISION_CRC		0xFF00	/* SPROM CRC8 value */
-#define  SSB_SPROM_REVISION_CRC_SHIFT	8
-
-/* SPROM Revision 1 */
-#define SSB_SPROM1_SPID			0x0004	/* Subsystem Product ID for PCI */
-#define SSB_SPROM1_SVID			0x0006	/* Subsystem Vendor ID for PCI */
-#define SSB_SPROM1_PID			0x0008	/* Product ID for PCI */
-#define SSB_SPROM1_IL0MAC		0x0048	/* 6 bytes MAC address for 802.11b/g */
-#define SSB_SPROM1_ET0MAC		0x004E	/* 6 bytes MAC address for Ethernet */
-#define SSB_SPROM1_ET1MAC		0x0054	/* 6 bytes MAC address for 802.11a */
-#define SSB_SPROM1_ETHPHY		0x005A	/* Ethernet PHY settings */
-#define  SSB_SPROM1_ETHPHY_ET0A		0x001F	/* MII Address for enet0 */
-#define  SSB_SPROM1_ETHPHY_ET1A		0x03E0	/* MII Address for enet1 */
-#define  SSB_SPROM1_ETHPHY_ET1A_SHIFT	5
-#define  SSB_SPROM1_ETHPHY_ET0M		(1<<14)	/* MDIO for enet0 */
-#define  SSB_SPROM1_ETHPHY_ET1M		(1<<15)	/* MDIO for enet1 */
-#define SSB_SPROM1_BINF			0x005C	/* Board info */
-#define  SSB_SPROM1_BINF_BREV		0x00FF	/* Board Revision */
-#define  SSB_SPROM1_BINF_CCODE		0x0F00	/* Country Code */
-#define  SSB_SPROM1_BINF_CCODE_SHIFT	8
-#define  SSB_SPROM1_BINF_ANTBG		0x3000	/* Available B-PHY and G-PHY antennas */
-#define  SSB_SPROM1_BINF_ANTBG_SHIFT	12
-#define  SSB_SPROM1_BINF_ANTA		0xC000	/* Available A-PHY antennas */
-#define  SSB_SPROM1_BINF_ANTA_SHIFT	14
-#define SSB_SPROM1_PA0B0		0x005E
-#define SSB_SPROM1_PA0B1		0x0060
-#define SSB_SPROM1_PA0B2		0x0062
-#define SSB_SPROM1_GPIOA		0x0064	/* General Purpose IO pins 0 and 1 */
-#define  SSB_SPROM1_GPIOA_P0		0x00FF	/* Pin 0 */
-#define  SSB_SPROM1_GPIOA_P1		0xFF00	/* Pin 1 */
-#define  SSB_SPROM1_GPIOA_P1_SHIFT	8
-#define SSB_SPROM1_GPIOB		0x0066	/* General Purpuse IO pins 2 and 3 */
-#define  SSB_SPROM1_GPIOB_P2		0x00FF	/* Pin 2 */
-#define  SSB_SPROM1_GPIOB_P3		0xFF00	/* Pin 3 */
-#define  SSB_SPROM1_GPIOB_P3_SHIFT	8
-#define SSB_SPROM1_MAXPWR		0x0068	/* Power Amplifier Max Power */
-#define  SSB_SPROM1_MAXPWR_BG		0x00FF	/* B-PHY and G-PHY (in dBm Q5.2) */
-#define  SSB_SPROM1_MAXPWR_A		0xFF00	/* A-PHY (in dBm Q5.2) */
-#define  SSB_SPROM1_MAXPWR_A_SHIFT	8
-#define SSB_SPROM1_PA1B0		0x006A
-#define SSB_SPROM1_PA1B1		0x006C
-#define SSB_SPROM1_PA1B2		0x006E
-#define SSB_SPROM1_ITSSI		0x0070	/* Idle TSSI Target */
-#define  SSB_SPROM1_ITSSI_BG		0x00FF	/* B-PHY and G-PHY*/
-#define  SSB_SPROM1_ITSSI_A		0xFF00	/* A-PHY */
-#define  SSB_SPROM1_ITSSI_A_SHIFT	8
-#define SSB_SPROM1_BFLLO		0x0072	/* Boardflags (low 16 bits) */
-#define SSB_SPROM1_AGAIN		0x0074	/* Antenna Gain (in dBm Q5.2) */
-#define  SSB_SPROM1_AGAIN_BG		0x00FF	/* B-PHY and G-PHY */
-#define  SSB_SPROM1_AGAIN_BG_SHIFT	0
-#define  SSB_SPROM1_AGAIN_A		0xFF00	/* A-PHY */
-#define  SSB_SPROM1_AGAIN_A_SHIFT	8
-
-/* SPROM Revision 2 (inherits from rev 1) */
-#define SSB_SPROM2_BFLHI		0x0038	/* Boardflags (high 16 bits) */
-#define SSB_SPROM2_MAXP_A		0x003A	/* A-PHY Max Power */
-#define  SSB_SPROM2_MAXP_A_HI		0x00FF	/* Max Power High */
-#define  SSB_SPROM2_MAXP_A_LO		0xFF00	/* Max Power Low */
-#define  SSB_SPROM2_MAXP_A_LO_SHIFT	8
-#define SSB_SPROM2_PA1LOB0		0x003C	/* A-PHY PowerAmplifier Low Settings */
-#define SSB_SPROM2_PA1LOB1		0x003E	/* A-PHY PowerAmplifier Low Settings */
-#define SSB_SPROM2_PA1LOB2		0x0040	/* A-PHY PowerAmplifier Low Settings */
-#define SSB_SPROM2_PA1HIB0		0x0042	/* A-PHY PowerAmplifier High Settings */
-#define SSB_SPROM2_PA1HIB1		0x0044	/* A-PHY PowerAmplifier High Settings */
-#define SSB_SPROM2_PA1HIB2		0x0046	/* A-PHY PowerAmplifier High Settings */
-#define SSB_SPROM2_OPO			0x0078	/* OFDM Power Offset from CCK Level */
-#define  SSB_SPROM2_OPO_VALUE		0x00FF
-#define  SSB_SPROM2_OPO_UNUSED		0xFF00
-#define SSB_SPROM2_CCODE		0x007C	/* Two char Country Code */
-
-/* SPROM Revision 3 (inherits most data from rev 2) */
-#define SSB_SPROM3_OFDMAPO		0x002C	/* A-PHY OFDM Mid Power Offset (4 bytes, BigEndian) */
-#define SSB_SPROM3_OFDMALPO		0x0030	/* A-PHY OFDM Low Power Offset (4 bytes, BigEndian) */
-#define SSB_SPROM3_OFDMAHPO		0x0034	/* A-PHY OFDM High Power Offset (4 bytes, BigEndian) */
-#define SSB_SPROM3_GPIOLDC		0x0042	/* GPIO LED Powersave Duty Cycle (4 bytes, BigEndian) */
-#define  SSB_SPROM3_GPIOLDC_OFF		0x0000FF00	/* Off Count */
-#define  SSB_SPROM3_GPIOLDC_OFF_SHIFT	8
-#define  SSB_SPROM3_GPIOLDC_ON		0x00FF0000	/* On Count */
-#define  SSB_SPROM3_GPIOLDC_ON_SHIFT	16
-#define SSB_SPROM3_IL0MAC		0x004A	/* 6 bytes MAC address for 802.11b/g */
-#define SSB_SPROM3_CCKPO		0x0078	/* CCK Power Offset */
-#define  SSB_SPROM3_CCKPO_1M		0x000F	/* 1M Rate PO */
-#define  SSB_SPROM3_CCKPO_2M		0x00F0	/* 2M Rate PO */
-#define  SSB_SPROM3_CCKPO_2M_SHIFT	4
-#define  SSB_SPROM3_CCKPO_55M		0x0F00	/* 5.5M Rate PO */
-#define  SSB_SPROM3_CCKPO_55M_SHIFT	8
-#define  SSB_SPROM3_CCKPO_11M		0xF000	/* 11M Rate PO */
-#define  SSB_SPROM3_CCKPO_11M_SHIFT	12
-#define  SSB_SPROM3_OFDMGPO		0x107A	/* G-PHY OFDM Power Offset (4 bytes, BigEndian) */
-
-/* SPROM Revision 4 */
-#define SSB_SPROM4_BFLLO		0x0044	/* Boardflags (low 16 bits) */
-#define SSB_SPROM4_BFLHI		0x0046  /* Board Flags Hi */
-#define SSB_SPROM4_BFL2LO		0x0048	/* Board flags 2 (low 16 bits) */
-#define SSB_SPROM4_BFL2HI		0x004A	/* Board flags 2 Hi */
-#define SSB_SPROM4_IL0MAC		0x004C	/* 6 byte MAC address for a/b/g/n */
-#define SSB_SPROM4_CCODE		0x0052	/* Country Code (2 bytes) */
-#define SSB_SPROM4_GPIOA		0x0056	/* Gen. Purpose IO # 0 and 1 */
-#define  SSB_SPROM4_GPIOA_P0		0x00FF	/* Pin 0 */
-#define  SSB_SPROM4_GPIOA_P1		0xFF00	/* Pin 1 */
-#define  SSB_SPROM4_GPIOA_P1_SHIFT	8
-#define SSB_SPROM4_GPIOB		0x0058	/* Gen. Purpose IO # 2 and 3 */
-#define  SSB_SPROM4_GPIOB_P2		0x00FF	/* Pin 2 */
-#define  SSB_SPROM4_GPIOB_P3		0xFF00	/* Pin 3 */
-#define  SSB_SPROM4_GPIOB_P3_SHIFT	8
-#define SSB_SPROM4_ETHPHY		0x005A	/* Ethernet PHY settings ?? */
-#define  SSB_SPROM4_ETHPHY_ET0A		0x001F	/* MII Address for enet0 */
-#define  SSB_SPROM4_ETHPHY_ET1A		0x03E0	/* MII Address for enet1 */
-#define  SSB_SPROM4_ETHPHY_ET1A_SHIFT	5
-#define  SSB_SPROM4_ETHPHY_ET0M		(1<<14)	/* MDIO for enet0 */
-#define  SSB_SPROM4_ETHPHY_ET1M		(1<<15)	/* MDIO for enet1 */
-#define SSB_SPROM4_ANTAVAIL		0x005D  /* Antenna available bitfields */
-#define  SSB_SPROM4_ANTAVAIL_A		0x00FF	/* A-PHY bitfield */
-#define  SSB_SPROM4_ANTAVAIL_A_SHIFT	0
-#define  SSB_SPROM4_ANTAVAIL_BG		0xFF00	/* B-PHY and G-PHY bitfield */
-#define  SSB_SPROM4_ANTAVAIL_BG_SHIFT	8
-#define SSB_SPROM4_AGAIN01		0x005E	/* Antenna Gain (in dBm Q5.2) */
-#define  SSB_SPROM4_AGAIN0		0x00FF	/* Antenna 0 */
-#define  SSB_SPROM4_AGAIN0_SHIFT	0
-#define  SSB_SPROM4_AGAIN1		0xFF00	/* Antenna 1 */
-#define  SSB_SPROM4_AGAIN1_SHIFT	8
-#define SSB_SPROM4_AGAIN23		0x0060
-#define  SSB_SPROM4_AGAIN2		0x00FF	/* Antenna 2 */
-#define  SSB_SPROM4_AGAIN2_SHIFT	0
-#define  SSB_SPROM4_AGAIN3		0xFF00	/* Antenna 3 */
-#define  SSB_SPROM4_AGAIN3_SHIFT	8
-#define SSB_SPROM4_TXPID2G01		0x0062 	/* TX Power Index 2GHz */
-#define  SSB_SPROM4_TXPID2G0		0x00FF
-#define  SSB_SPROM4_TXPID2G0_SHIFT	0
-#define  SSB_SPROM4_TXPID2G1		0xFF00
-#define  SSB_SPROM4_TXPID2G1_SHIFT	8
-#define SSB_SPROM4_TXPID2G23		0x0064 	/* TX Power Index 2GHz */
-#define  SSB_SPROM4_TXPID2G2		0x00FF
-#define  SSB_SPROM4_TXPID2G2_SHIFT	0
-#define  SSB_SPROM4_TXPID2G3		0xFF00
-#define  SSB_SPROM4_TXPID2G3_SHIFT	8
-#define SSB_SPROM4_TXPID5G01		0x0066 	/* TX Power Index 5GHz middle subband */
-#define  SSB_SPROM4_TXPID5G0		0x00FF
-#define  SSB_SPROM4_TXPID5G0_SHIFT	0
-#define  SSB_SPROM4_TXPID5G1		0xFF00
-#define  SSB_SPROM4_TXPID5G1_SHIFT	8
-#define SSB_SPROM4_TXPID5G23		0x0068 	/* TX Power Index 5GHz middle subband */
-#define  SSB_SPROM4_TXPID5G2		0x00FF
-#define  SSB_SPROM4_TXPID5G2_SHIFT	0
-#define  SSB_SPROM4_TXPID5G3		0xFF00
-#define  SSB_SPROM4_TXPID5G3_SHIFT	8
-#define SSB_SPROM4_TXPID5GL01		0x006A 	/* TX Power Index 5GHz low subband */
-#define  SSB_SPROM4_TXPID5GL0		0x00FF
-#define  SSB_SPROM4_TXPID5GL0_SHIFT	0
-#define  SSB_SPROM4_TXPID5GL1		0xFF00
-#define  SSB_SPROM4_TXPID5GL1_SHIFT	8
-#define SSB_SPROM4_TXPID5GL23		0x006C 	/* TX Power Index 5GHz low subband */
-#define  SSB_SPROM4_TXPID5GL2		0x00FF
-#define  SSB_SPROM4_TXPID5GL2_SHIFT	0
-#define  SSB_SPROM4_TXPID5GL3		0xFF00
-#define  SSB_SPROM4_TXPID5GL3_SHIFT	8
-#define SSB_SPROM4_TXPID5GH01		0x006E 	/* TX Power Index 5GHz high subband */
-#define  SSB_SPROM4_TXPID5GH0		0x00FF
-#define  SSB_SPROM4_TXPID5GH0_SHIFT	0
-#define  SSB_SPROM4_TXPID5GH1		0xFF00
-#define  SSB_SPROM4_TXPID5GH1_SHIFT	8
-#define SSB_SPROM4_TXPID5GH23		0x0070 	/* TX Power Index 5GHz high subband */
-#define  SSB_SPROM4_TXPID5GH2		0x00FF
-#define  SSB_SPROM4_TXPID5GH2_SHIFT	0
-#define  SSB_SPROM4_TXPID5GH3		0xFF00
-#define  SSB_SPROM4_TXPID5GH3_SHIFT	8
-#define SSB_SPROM4_MAXP_BG		0x0080  /* Max Power BG in path 1 */
-#define  SSB_SPROM4_MAXP_BG_MASK	0x00FF  /* Mask for Max Power BG */
-#define  SSB_SPROM4_ITSSI_BG		0xFF00	/* Mask for path 1 itssi_bg */
-#define  SSB_SPROM4_ITSSI_BG_SHIFT	8
-#define SSB_SPROM4_MAXP_A		0x008A  /* Max Power A in path 1 */
-#define  SSB_SPROM4_MAXP_A_MASK		0x00FF  /* Mask for Max Power A */
-#define  SSB_SPROM4_ITSSI_A		0xFF00	/* Mask for path 1 itssi_a */
-#define  SSB_SPROM4_ITSSI_A_SHIFT	8
-#define SSB_SPROM4_PA0B0		0x0082	/* The paXbY locations are */
-#define SSB_SPROM4_PA0B1		0x0084	/*   only guesses */
-#define SSB_SPROM4_PA0B2		0x0086
-#define SSB_SPROM4_PA1B0		0x008E
-#define SSB_SPROM4_PA1B1		0x0090
-#define SSB_SPROM4_PA1B2		0x0092
-
-/* SPROM Revision 5 (inherits most data from rev 4) */
-#define SSB_SPROM5_CCODE		0x0044	/* Country Code (2 bytes) */
-#define SSB_SPROM5_BFLLO		0x004A	/* Boardflags (low 16 bits) */
-#define SSB_SPROM5_BFLHI		0x004C  /* Board Flags Hi */
-#define SSB_SPROM5_BFL2LO		0x004E	/* Board flags 2 (low 16 bits) */
-#define SSB_SPROM5_BFL2HI		0x0050	/* Board flags 2 Hi */
-#define SSB_SPROM5_IL0MAC		0x0052	/* 6 byte MAC address for a/b/g/n */
-#define SSB_SPROM5_GPIOA		0x0076	/* Gen. Purpose IO # 0 and 1 */
-#define  SSB_SPROM5_GPIOA_P0		0x00FF	/* Pin 0 */
-#define  SSB_SPROM5_GPIOA_P1		0xFF00	/* Pin 1 */
-#define  SSB_SPROM5_GPIOA_P1_SHIFT	8
-#define SSB_SPROM5_GPIOB		0x0078	/* Gen. Purpose IO # 2 and 3 */
-#define  SSB_SPROM5_GPIOB_P2		0x00FF	/* Pin 2 */
-#define  SSB_SPROM5_GPIOB_P3		0xFF00	/* Pin 3 */
-#define  SSB_SPROM5_GPIOB_P3_SHIFT	8
-
-/* SPROM Revision 8 */
-#define SSB_SPROM8_BOARDREV		0x0082	/* Board revision */
-#define SSB_SPROM8_BFLLO		0x0084	/* Board flags (bits 0-15) */
-#define SSB_SPROM8_BFLHI		0x0086	/* Board flags (bits 16-31) */
-#define SSB_SPROM8_BFL2LO		0x0088	/* Board flags (bits 32-47) */
-#define SSB_SPROM8_BFL2HI		0x008A	/* Board flags (bits 48-63) */
-#define SSB_SPROM8_IL0MAC		0x008C	/* 6 byte MAC address */
-#define SSB_SPROM8_CCODE		0x0092	/* 2 byte country code */
-#define SSB_SPROM8_GPIOA		0x0096	/*Gen. Purpose IO # 0 and 1 */
-#define  SSB_SPROM8_GPIOA_P0		0x00FF	/* Pin 0 */
-#define  SSB_SPROM8_GPIOA_P1		0xFF00	/* Pin 1 */
-#define  SSB_SPROM8_GPIOA_P1_SHIFT	8
-#define SSB_SPROM8_GPIOB		0x0098	/* Gen. Purpose IO # 2 and 3 */
-#define  SSB_SPROM8_GPIOB_P2		0x00FF	/* Pin 2 */
-#define  SSB_SPROM8_GPIOB_P3		0xFF00	/* Pin 3 */
-#define  SSB_SPROM8_GPIOB_P3_SHIFT	8
-#define SSB_SPROM8_ANTAVAIL		0x009C  /* Antenna available bitfields*/
-#define  SSB_SPROM8_ANTAVAIL_A		0xFF00	/* A-PHY bitfield */
-#define  SSB_SPROM8_ANTAVAIL_A_SHIFT	8
-#define  SSB_SPROM8_ANTAVAIL_BG		0x00FF	/* B-PHY and G-PHY bitfield */
-#define  SSB_SPROM8_ANTAVAIL_BG_SHIFT	0
-#define SSB_SPROM8_AGAIN01		0x009E	/* Antenna Gain (in dBm Q5.2) */
-#define  SSB_SPROM8_AGAIN0		0x00FF	/* Antenna 0 */
-#define  SSB_SPROM8_AGAIN0_SHIFT	0
-#define  SSB_SPROM8_AGAIN1		0xFF00	/* Antenna 1 */
-#define  SSB_SPROM8_AGAIN1_SHIFT	8
-#define SSB_SPROM8_AGAIN23		0x00A0
-#define  SSB_SPROM8_AGAIN2		0x00FF	/* Antenna 2 */
-#define  SSB_SPROM8_AGAIN2_SHIFT	0
-#define  SSB_SPROM8_AGAIN3		0xFF00	/* Antenna 3 */
-#define  SSB_SPROM8_AGAIN3_SHIFT	8
-#define SSB_SPROM8_RSSIPARM2G		0x00A4	/* RSSI params for 2GHz */
-#define  SSB_SPROM8_RSSISMF2G		0x000F
-#define  SSB_SPROM8_RSSISMC2G		0x00F0
-#define  SSB_SPROM8_RSSISMC2G_SHIFT	4
-#define  SSB_SPROM8_RSSISAV2G		0x0700
-#define  SSB_SPROM8_RSSISAV2G_SHIFT	8
-#define  SSB_SPROM8_BXA2G		0x1800
-#define  SSB_SPROM8_BXA2G_SHIFT		11
-#define SSB_SPROM8_RSSIPARM5G		0x00A6	/* RSSI params for 5GHz */
-#define  SSB_SPROM8_RSSISMF5G		0x000F
-#define  SSB_SPROM8_RSSISMC5G		0x00F0
-#define  SSB_SPROM8_RSSISMC5G_SHIFT	4
-#define  SSB_SPROM8_RSSISAV5G		0x0700
-#define  SSB_SPROM8_RSSISAV5G_SHIFT	8
-#define  SSB_SPROM8_BXA5G		0x1800
-#define  SSB_SPROM8_BXA5G_SHIFT		11
-#define SSB_SPROM8_TRI25G		0x00A8	/* TX isolation 2.4&5.3GHz */
-#define  SSB_SPROM8_TRI2G		0x00FF	/* TX isolation 2.4GHz */
-#define  SSB_SPROM8_TRI5G		0xFF00	/* TX isolation 5.3GHz */
-#define  SSB_SPROM8_TRI5G_SHIFT		8
-#define SSB_SPROM8_TRI5GHL		0x00AA	/* TX isolation 5.2/5.8GHz */
-#define  SSB_SPROM8_TRI5GL		0x00FF	/* TX isolation 5.2GHz */
-#define  SSB_SPROM8_TRI5GH		0xFF00	/* TX isolation 5.8GHz */
-#define  SSB_SPROM8_TRI5GH_SHIFT	8
-#define SSB_SPROM8_RXPO			0x00AC  /* RX power offsets */
-#define  SSB_SPROM8_RXPO2G		0x00FF	/* 2GHz RX power offset */
-#define  SSB_SPROM8_RXPO5G		0xFF00	/* 5GHz RX power offset */
-#define  SSB_SPROM8_RXPO5G_SHIFT	8
-#define SSB_SPROM8_FEM2G		0x00AE
-#define SSB_SPROM8_FEM5G		0x00B0
-#define  SSB_SROM8_FEM_TSSIPOS		0x0001
-#define  SSB_SROM8_FEM_TSSIPOS_SHIFT	0
-#define  SSB_SROM8_FEM_EXTPA_GAIN	0x0006
-#define  SSB_SROM8_FEM_EXTPA_GAIN_SHIFT	1
-#define  SSB_SROM8_FEM_PDET_RANGE	0x00F8
-#define  SSB_SROM8_FEM_PDET_RANGE_SHIFT	3
-#define  SSB_SROM8_FEM_TR_ISO		0x0700
-#define  SSB_SROM8_FEM_TR_ISO_SHIFT	8
-#define  SSB_SROM8_FEM_ANTSWLUT		0xF800
-#define  SSB_SROM8_FEM_ANTSWLUT_SHIFT	11
-#define SSB_SPROM8_THERMAL		0x00B2
-#define SSB_SPROM8_MPWR_RAWTS		0x00B4
-#define SSB_SPROM8_TS_SLP_OPT_CORRX	0x00B6
-#define SSB_SPROM8_FOC_HWIQ_IQSWP	0x00B8
-#define SSB_SPROM8_PHYCAL_TEMPDELTA	0x00BA
-
-/* There are 4 blocks with power info sharing the same layout */
-#define SSB_SROM8_PWR_INFO_CORE0	0x00C0
-#define SSB_SROM8_PWR_INFO_CORE1	0x00E0
-#define SSB_SROM8_PWR_INFO_CORE2	0x0100
-#define SSB_SROM8_PWR_INFO_CORE3	0x0120
-
-#define SSB_SROM8_2G_MAXP_ITSSI		0x00
-#define  SSB_SPROM8_2G_MAXP		0x00FF
-#define  SSB_SPROM8_2G_ITSSI		0xFF00
-#define  SSB_SPROM8_2G_ITSSI_SHIFT	8
-#define SSB_SROM8_2G_PA_0		0x02	/* 2GHz power amp settings */
-#define SSB_SROM8_2G_PA_1		0x04
-#define SSB_SROM8_2G_PA_2		0x06
-#define SSB_SROM8_5G_MAXP_ITSSI		0x08	/* 5GHz ITSSI and 5.3GHz Max Power */
-#define  SSB_SPROM8_5G_MAXP		0x00FF
-#define  SSB_SPROM8_5G_ITSSI		0xFF00
-#define  SSB_SPROM8_5G_ITSSI_SHIFT	8
-#define SSB_SPROM8_5GHL_MAXP		0x0A	/* 5.2GHz and 5.8GHz Max Power */
-#define  SSB_SPROM8_5GH_MAXP		0x00FF
-#define  SSB_SPROM8_5GL_MAXP		0xFF00
-#define  SSB_SPROM8_5GL_MAXP_SHIFT	8
-#define SSB_SROM8_5G_PA_0		0x0C	/* 5.3GHz power amp settings */
-#define SSB_SROM8_5G_PA_1		0x0E
-#define SSB_SROM8_5G_PA_2		0x10
-#define SSB_SROM8_5GL_PA_0		0x12	/* 5.2GHz power amp settings */
-#define SSB_SROM8_5GL_PA_1		0x14
-#define SSB_SROM8_5GL_PA_2		0x16
-#define SSB_SROM8_5GH_PA_0		0x18	/* 5.8GHz power amp settings */
-#define SSB_SROM8_5GH_PA_1		0x1A
-#define SSB_SROM8_5GH_PA_2		0x1C
-
-/* TODO: Make it deprecated */
-#define SSB_SPROM8_MAXP_BG		0x00C0  /* Max Power 2GHz in path 1 */
-#define  SSB_SPROM8_MAXP_BG_MASK	0x00FF  /* Mask for Max Power 2GHz */
-#define  SSB_SPROM8_ITSSI_BG		0xFF00	/* Mask for path 1 itssi_bg */
-#define  SSB_SPROM8_ITSSI_BG_SHIFT	8
-#define SSB_SPROM8_PA0B0		0x00C2	/* 2GHz power amp settings */
-#define SSB_SPROM8_PA0B1		0x00C4
-#define SSB_SPROM8_PA0B2		0x00C6
-#define SSB_SPROM8_MAXP_A		0x00C8  /* Max Power 5.3GHz */
-#define  SSB_SPROM8_MAXP_A_MASK		0x00FF  /* Mask for Max Power 5.3GHz */
-#define  SSB_SPROM8_ITSSI_A		0xFF00	/* Mask for path 1 itssi_a */
-#define  SSB_SPROM8_ITSSI_A_SHIFT	8
-#define SSB_SPROM8_MAXP_AHL		0x00CA  /* Max Power 5.2/5.8GHz */
-#define  SSB_SPROM8_MAXP_AH_MASK	0x00FF  /* Mask for Max Power 5.8GHz */
-#define  SSB_SPROM8_MAXP_AL_MASK	0xFF00  /* Mask for Max Power 5.2GHz */
-#define  SSB_SPROM8_MAXP_AL_SHIFT	8
-#define SSB_SPROM8_PA1B0		0x00CC	/* 5.3GHz power amp settings */
-#define SSB_SPROM8_PA1B1		0x00CE
-#define SSB_SPROM8_PA1B2		0x00D0
-#define SSB_SPROM8_PA1LOB0		0x00D2	/* 5.2GHz power amp settings */
-#define SSB_SPROM8_PA1LOB1		0x00D4
-#define SSB_SPROM8_PA1LOB2		0x00D6
-#define SSB_SPROM8_PA1HIB0		0x00D8	/* 5.8GHz power amp settings */
-#define SSB_SPROM8_PA1HIB1		0x00DA
-#define SSB_SPROM8_PA1HIB2		0x00DC
-
-#define SSB_SPROM8_CCK2GPO		0x0140	/* CCK power offset */
-#define SSB_SPROM8_OFDM2GPO		0x0142	/* 2.4GHz OFDM power offset */
-#define SSB_SPROM8_OFDM5GPO		0x0146	/* 5.3GHz OFDM power offset */
-#define SSB_SPROM8_OFDM5GLPO		0x014A	/* 5.2GHz OFDM power offset */
-#define SSB_SPROM8_OFDM5GHPO		0x014E	/* 5.8GHz OFDM power offset */
-
-/* Values for boardflags_lo read from SPROM */
-#define SSB_BFL_BTCOEXIST		0x0001	/* implements Bluetooth coexistance */
-#define SSB_BFL_PACTRL			0x0002	/* GPIO 9 controlling the PA */
-#define SSB_BFL_AIRLINEMODE		0x0004	/* implements GPIO 13 radio disable indication */
-#define SSB_BFL_RSSI			0x0008	/* software calculates nrssi slope. */
-#define SSB_BFL_ENETSPI			0x0010	/* has ephy roboswitch spi */
-#define SSB_BFL_XTAL_NOSLOW		0x0020	/* no slow clock available */
-#define SSB_BFL_CCKHIPWR		0x0040	/* can do high power CCK transmission */
-#define SSB_BFL_ENETADM			0x0080	/* has ADMtek switch */
-#define SSB_BFL_ENETVLAN		0x0100	/* can do vlan */
-#define SSB_BFL_AFTERBURNER		0x0200	/* supports Afterburner mode */
-#define SSB_BFL_NOPCI			0x0400	/* board leaves PCI floating */
-#define SSB_BFL_FEM			0x0800	/* supports the Front End Module */
-#define SSB_BFL_EXTLNA			0x1000	/* has an external LNA */
-#define SSB_BFL_HGPA			0x2000	/* had high gain PA */
-#define SSB_BFL_BTCMOD			0x4000	/* BFL_BTCOEXIST is given in alternate GPIOs */
-#define SSB_BFL_ALTIQ			0x8000	/* alternate I/Q settings */
-
-/* Values for boardflags_hi read from SPROM */
-#define SSB_BFH_NOPA			0x0001	/* has no PA */
-#define SSB_BFH_RSSIINV			0x0002	/* RSSI uses positive slope (not TSSI) */
-#define SSB_BFH_PAREF			0x0004	/* uses the PARef LDO */
-#define SSB_BFH_3TSWITCH		0x0008	/* uses a triple throw switch shared with bluetooth */
-#define SSB_BFH_PHASESHIFT		0x0010	/* can support phase shifter */
-#define SSB_BFH_BUCKBOOST		0x0020	/* has buck/booster */
-#define SSB_BFH_FEM_BT			0x0040	/* has FEM and switch to share antenna with bluetooth */
-
-/* Values for boardflags2_lo read from SPROM */
-#define SSB_BFL2_RXBB_INT_REG_DIS	0x0001	/* external RX BB regulator present */
-#define SSB_BFL2_APLL_WAR		0x0002	/* alternative A-band PLL settings implemented */
-#define SSB_BFL2_TXPWRCTRL_EN 		0x0004	/* permits enabling TX Power Control */
-#define SSB_BFL2_2X4_DIV		0x0008	/* 2x4 diversity switch */
-#define SSB_BFL2_5G_PWRGAIN		0x0010	/* supports 5G band power gain */
-#define SSB_BFL2_PCIEWAR_OVR		0x0020	/* overrides ASPM and Clkreq settings */
-#define SSB_BFL2_CAESERS_BRD		0x0040	/* is Caesers board (unused) */
-#define SSB_BFL2_BTC3WIRE		0x0080	/* used 3-wire bluetooth coexist */
-#define SSB_BFL2_SKWRKFEM_BRD		0x0100	/* 4321mcm93 uses Skyworks FEM */
-#define SSB_BFL2_SPUR_WAR		0x0200	/* has a workaround for clock-harmonic spurs */
-#define SSB_BFL2_GPLL_WAR		0x0400	/* altenative G-band PLL settings implemented */
-
-/* Values for SSB_SPROM1_BINF_CCODE */
-enum {
-	SSB_SPROM1CCODE_WORLD = 0,
-	SSB_SPROM1CCODE_THAILAND,
-	SSB_SPROM1CCODE_ISRAEL,
-	SSB_SPROM1CCODE_JORDAN,
-	SSB_SPROM1CCODE_CHINA,
-	SSB_SPROM1CCODE_JAPAN,
-	SSB_SPROM1CCODE_USA_CANADA_ANZ,
-	SSB_SPROM1CCODE_EUROPE,
-	SSB_SPROM1CCODE_USA_LOW,
-	SSB_SPROM1CCODE_JAPAN_HIGH,
-	SSB_SPROM1CCODE_ALL,
-	SSB_SPROM1CCODE_NONE,
-};
-
-/* Address-Match values and masks (SSB_ADMATCHxxx) */
-#define SSB_ADM_TYPE			0x00000003	/* Address type */
-#define  SSB_ADM_TYPE0			0
-#define  SSB_ADM_TYPE1			1
-#define  SSB_ADM_TYPE2			2
-#define SSB_ADM_AD64			0x00000004
-#define SSB_ADM_SZ0			0x000000F8	/* Type0 size */
-#define SSB_ADM_SZ0_SHIFT		3
-#define SSB_ADM_SZ1			0x000001F8	/* Type1 size */
-#define SSB_ADM_SZ1_SHIFT		3
-#define SSB_ADM_SZ2			0x000001F8	/* Type2 size */
-#define SSB_ADM_SZ2_SHIFT		3
-#define SSB_ADM_EN			0x00000400	/* Enable */
-#define SSB_ADM_NEG			0x00000800	/* Negative decode */
-#define SSB_ADM_BASE0			0xFFFFFF00	/* Type0 base address */
-#define SSB_ADM_BASE0_SHIFT		8
-#define SSB_ADM_BASE1			0xFFFFF000	/* Type1 base address for the core */
-#define SSB_ADM_BASE1_SHIFT		12
-#define SSB_ADM_BASE2			0xFFFF0000	/* Type2 base address for the core */
-#define SSB_ADM_BASE2_SHIFT		16
-
-
-#endif /* LINUX_SSB_REGS_H_ */
diff --git a/ANDROID_3.4.5/include/linux/stackprotector.h b/ANDROID_3.4.5/include/linux/stackprotector.h
deleted file mode 100644
index 6f3e54c7..00000000
--- a/ANDROID_3.4.5/include/linux/stackprotector.h
+++ /dev/null
@@ -1,16 +0,0 @@
-#ifndef _LINUX_STACKPROTECTOR_H
-#define _LINUX_STACKPROTECTOR_H 1
-
-#include <linux/compiler.h>
-#include <linux/sched.h>
-#include <linux/random.h>
-
-#ifdef CONFIG_CC_STACKPROTECTOR
-# include <asm/stackprotector.h>
-#else
-static inline void boot_init_stack_canary(void)
-{
-}
-#endif
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/stacktrace.h b/ANDROID_3.4.5/include/linux/stacktrace.h
deleted file mode 100644
index 115b570e..00000000
--- a/ANDROID_3.4.5/include/linux/stacktrace.h
+++ /dev/null
@@ -1,37 +0,0 @@
-#ifndef __LINUX_STACKTRACE_H
-#define __LINUX_STACKTRACE_H
-
-struct task_struct;
-struct pt_regs;
-
-#ifdef CONFIG_STACKTRACE
-struct task_struct;
-
-struct stack_trace {
-	unsigned int nr_entries, max_entries;
-	unsigned long *entries;
-	int skip;	/* input argument: How many entries to skip */
-};
-
-extern void save_stack_trace(struct stack_trace *trace);
-extern void save_stack_trace_regs(struct pt_regs *regs,
-				  struct stack_trace *trace);
-extern void save_stack_trace_tsk(struct task_struct *tsk,
-				struct stack_trace *trace);
-
-extern void print_stack_trace(struct stack_trace *trace, int spaces);
-
-#ifdef CONFIG_USER_STACKTRACE_SUPPORT
-extern void save_stack_trace_user(struct stack_trace *trace);
-#else
-# define save_stack_trace_user(trace)              do { } while (0)
-#endif
-
-#else
-# define save_stack_trace(trace)			do { } while (0)
-# define save_stack_trace_tsk(tsk, trace)		do { } while (0)
-# define save_stack_trace_user(trace)			do { } while (0)
-# define print_stack_trace(trace, spaces)		do { } while (0)
-#endif
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/stallion.h b/ANDROID_3.4.5/include/linux/stallion.h
deleted file mode 100644
index 336af33c..00000000
--- a/ANDROID_3.4.5/include/linux/stallion.h
+++ /dev/null
@@ -1,147 +0,0 @@
-/*****************************************************************************/
-
-/*
- *	stallion.h  -- stallion multiport serial driver.
- *
- *	Copyright (C) 1996-1998  Stallion Technologies
- *	Copyright (C) 1994-1996  Greg Ungerer.
- *
- *	This program is free software; you can redistribute it and/or modify
- *	it under the terms of the GNU General Public License as published by
- *	the Free Software Foundation; either version 2 of the License, or
- *	(at your option) any later version.
- *
- *	This program is distributed in the hope that it will be useful,
- *	but WITHOUT ANY WARRANTY; without even the implied warranty of
- *	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *	GNU General Public License for more details.
- *
- *	You should have received a copy of the GNU General Public License
- *	along with this program; if not, write to the Free Software
- *	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-/*****************************************************************************/
-#ifndef	_STALLION_H
-#define	_STALLION_H
-/*****************************************************************************/
-
-/*
- *	Define important driver constants here.
- */
-#define	STL_MAXBRDS		4
-#define	STL_MAXPANELS		4
-#define	STL_MAXBANKS		8
-#define	STL_PORTSPERPANEL	16
-#define	STL_MAXPORTS		64
-#define	STL_MAXDEVS		(STL_MAXBRDS * STL_MAXPORTS)
-
-
-/*
- *	Define a set of structures to hold all the board/panel/port info
- *	for our ports. These will be dynamically allocated as required.
- */
-
-/*
- *	Define a ring queue structure for each port. This will hold the
- *	TX data waiting to be output. Characters are fed into this buffer
- *	from the line discipline (or even direct from user space!) and
- *	then fed into the UARTs during interrupts. Will use a classic ring
- *	queue here for this. The good thing about this type of ring queue
- *	is that the head and tail pointers can be updated without interrupt
- *	protection - since "write" code only needs to change the head, and
- *	interrupt code only needs to change the tail.
- */
-struct stlrq {
-	char	*buf;
-	char	*head;
-	char	*tail;
-};
-
-/*
- *	Port, panel and board structures to hold status info about each.
- *	The board structure contains pointers to structures for each panel
- *	connected to it, and in turn each panel structure contains pointers
- *	for each port structure for each port on that panel. Note that
- *	the port structure also contains the board and panel number that it
- *	is associated with, this makes it (fairly) easy to get back to the
- *	board/panel info for a port.
- */
-struct stlport {
-	unsigned long		magic;
-	struct tty_port		port;
-	unsigned int		portnr;
-	unsigned int		panelnr;
-	unsigned int		brdnr;
-	int			ioaddr;
-	int			uartaddr;
-	unsigned int		pagenr;
-	unsigned long		istate;
-	int			baud_base;
-	int			custom_divisor;
-	int			close_delay;
-	int			closing_wait;
-	int			openwaitcnt;
-	int			brklen;
-	unsigned int		sigs;
-	unsigned int		rxignoremsk;
-	unsigned int		rxmarkmsk;
-	unsigned int		imr;
-	unsigned int		crenable;
-	unsigned long		clk;
-	unsigned long		hwid;
-	void			*uartp;
-	comstats_t		stats;
-	struct stlrq		tx;
-};
-
-struct stlpanel {
-	unsigned long	magic;
-	unsigned int	panelnr;
-	unsigned int	brdnr;
-	unsigned int	pagenr;
-	unsigned int	nrports;
-	int		iobase;
-	void		*uartp;
-	void		(*isr)(struct stlpanel *panelp, unsigned int iobase);
-	unsigned int	hwid;
-	unsigned int	ackmask;
-	struct stlport	*ports[STL_PORTSPERPANEL];
-};
-
-struct stlbrd {
-	unsigned long	magic;
-	unsigned int	brdnr;
-	unsigned int	brdtype;
-	unsigned int	state;
-	unsigned int	nrpanels;
-	unsigned int	nrports;
-	unsigned int	nrbnks;
-	int		irq;
-	int		irqtype;
-	int		(*isr)(struct stlbrd *brdp);
-	unsigned int	ioaddr1;
-	unsigned int	ioaddr2;
-	unsigned int	iosize1;
-	unsigned int	iosize2;
-	unsigned int	iostatus;
-	unsigned int	ioctrl;
-	unsigned int	ioctrlval;
-	unsigned int	hwid;
-	unsigned long	clk;
-	unsigned int	bnkpageaddr[STL_MAXBANKS];
-	unsigned int	bnkstataddr[STL_MAXBANKS];
-	struct stlpanel	*bnk2panel[STL_MAXBANKS];
-	struct stlpanel	*panels[STL_MAXPANELS];
-};
-
-
-/*
- *	Define MAGIC numbers used for above structures.
- */
-#define	STL_PORTMAGIC	0x5a7182c9
-#define	STL_PANELMAGIC	0x7ef621a1
-#define	STL_BOARDMAGIC	0xa2267f52
-
-/*****************************************************************************/
-#endif
diff --git a/ANDROID_3.4.5/include/linux/start_kernel.h b/ANDROID_3.4.5/include/linux/start_kernel.h
deleted file mode 100644
index d3e5f275..00000000
--- a/ANDROID_3.4.5/include/linux/start_kernel.h
+++ /dev/null
@@ -1,12 +0,0 @@
-#ifndef _LINUX_START_KERNEL_H
-#define _LINUX_START_KERNEL_H
-
-#include <linux/linkage.h>
-#include <linux/init.h>
-
-/* Define the prototype for start_kernel here, rather than cluttering
-   up something else. */
-
-extern asmlinkage void __init start_kernel(void);
-
-#endif /* _LINUX_START_KERNEL_H */
diff --git a/ANDROID_3.4.5/include/linux/stat.h b/ANDROID_3.4.5/include/linux/stat.h
deleted file mode 100644
index 611c398d..00000000
--- a/ANDROID_3.4.5/include/linux/stat.h
+++ /dev/null
@@ -1,80 +0,0 @@
-#ifndef _LINUX_STAT_H
-#define _LINUX_STAT_H
-
-#ifdef __KERNEL__
-
-#include <asm/stat.h>
-
-#endif
-
-#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2)
-
-#define S_IFMT  00170000
-#define S_IFSOCK 0140000
-#define S_IFLNK	 0120000
-#define S_IFREG  0100000
-#define S_IFBLK  0060000
-#define S_IFDIR  0040000
-#define S_IFCHR  0020000
-#define S_IFIFO  0010000
-#define S_ISUID  0004000
-#define S_ISGID  0002000
-#define S_ISVTX  0001000
-
-#define S_ISLNK(m)	(((m) & S_IFMT) == S_IFLNK)
-#define S_ISREG(m)	(((m) & S_IFMT) == S_IFREG)
-#define S_ISDIR(m)	(((m) & S_IFMT) == S_IFDIR)
-#define S_ISCHR(m)	(((m) & S_IFMT) == S_IFCHR)
-#define S_ISBLK(m)	(((m) & S_IFMT) == S_IFBLK)
-#define S_ISFIFO(m)	(((m) & S_IFMT) == S_IFIFO)
-#define S_ISSOCK(m)	(((m) & S_IFMT) == S_IFSOCK)
-
-#define S_IRWXU 00700
-#define S_IRUSR 00400
-#define S_IWUSR 00200
-#define S_IXUSR 00100
-
-#define S_IRWXG 00070
-#define S_IRGRP 00040
-#define S_IWGRP 00020
-#define S_IXGRP 00010
-
-#define S_IRWXO 00007
-#define S_IROTH 00004
-#define S_IWOTH 00002
-#define S_IXOTH 00001
-
-#endif
-
-#ifdef __KERNEL__
-#define S_IRWXUGO	(S_IRWXU|S_IRWXG|S_IRWXO)
-#define S_IALLUGO	(S_ISUID|S_ISGID|S_ISVTX|S_IRWXUGO)
-#define S_IRUGO		(S_IRUSR|S_IRGRP|S_IROTH)
-#define S_IWUGO		(S_IWUSR|S_IWGRP|S_IWOTH)
-#define S_IXUGO		(S_IXUSR|S_IXGRP|S_IXOTH)
-
-#define UTIME_NOW	((1l << 30) - 1l)
-#define UTIME_OMIT	((1l << 30) - 2l)
-
-#include <linux/types.h>
-#include <linux/time.h>
-
-struct kstat {
-	u64		ino;
-	dev_t		dev;
-	umode_t		mode;
-	unsigned int	nlink;
-	uid_t		uid;
-	gid_t		gid;
-	dev_t		rdev;
-	loff_t		size;
-	struct timespec  atime;
-	struct timespec	mtime;
-	struct timespec	ctime;
-	unsigned long	blksize;
-	unsigned long long	blocks;
-};
-
-#endif
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/statfs.h b/ANDROID_3.4.5/include/linux/statfs.h
deleted file mode 100644
index 0166d320..00000000
--- a/ANDROID_3.4.5/include/linux/statfs.h
+++ /dev/null
@@ -1,43 +0,0 @@
-#ifndef _LINUX_STATFS_H
-#define _LINUX_STATFS_H
-
-#include <linux/types.h>
-#include <asm/statfs.h>
-
-struct kstatfs {
-	long f_type;
-	long f_bsize;
-	u64 f_blocks;
-	u64 f_bfree;
-	u64 f_bavail;
-	u64 f_files;
-	u64 f_ffree;
-	__kernel_fsid_t f_fsid;
-	long f_namelen;
-	long f_frsize;
-	long f_flags;
-	long f_spare[4];
-};
-
-/*
- * Definitions for the flag in f_flag.
- *
- * Generally these flags are equivalent to the MS_ flags used in the mount
- * ABI.  The exception is ST_VALID which has the same value as MS_REMOUNT
- * which doesn't make any sense for statfs.
- */
-#define ST_RDONLY	0x0001	/* mount read-only */
-#define ST_NOSUID	0x0002	/* ignore suid and sgid bits */
-#define ST_NODEV	0x0004	/* disallow access to device special files */
-#define ST_NOEXEC	0x0008	/* disallow program execution */
-#define ST_SYNCHRONOUS	0x0010	/* writes are synced at once */
-#define ST_VALID	0x0020	/* f_flags support is implemented */
-#define ST_MANDLOCK	0x0040	/* allow mandatory locks on an FS */
-/* 0x0080 used for ST_WRITE in glibc */
-/* 0x0100 used for ST_APPEND in glibc */
-/* 0x0200 used for ST_IMMUTABLE in glibc */
-#define ST_NOATIME	0x0400	/* do not update access times */
-#define ST_NODIRATIME	0x0800	/* do not update directory access times */
-#define ST_RELATIME	0x1000	/* update atime relative to mtime/ctime */
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/static_key.h b/ANDROID_3.4.5/include/linux/static_key.h
deleted file mode 100644
index 27bd3f8a..00000000
--- a/ANDROID_3.4.5/include/linux/static_key.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <linux/jump_label.h>
diff --git a/ANDROID_3.4.5/include/linux/stddef.h b/ANDROID_3.4.5/include/linux/stddef.h
deleted file mode 100644
index 1747b678..00000000
--- a/ANDROID_3.4.5/include/linux/stddef.h
+++ /dev/null
@@ -1,24 +0,0 @@
-#ifndef _LINUX_STDDEF_H
-#define _LINUX_STDDEF_H
-
-#include <linux/compiler.h>
-
-#ifdef __KERNEL__
-
-#undef NULL
-#define NULL ((void *)0)
-
-enum {
-	false	= 0,
-	true	= 1
-};
-
-#undef offsetof
-#ifdef __compiler_offsetof
-#define offsetof(TYPE,MEMBER) __compiler_offsetof(TYPE,MEMBER)
-#else
-#define offsetof(TYPE, MEMBER) ((size_t) &((TYPE *)0)->MEMBER)
-#endif
-#endif /* __KERNEL__ */
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/stmmac.h b/ANDROID_3.4.5/include/linux/stmmac.h
deleted file mode 100644
index 0dddc9e4..00000000
--- a/ANDROID_3.4.5/include/linux/stmmac.h
+++ /dev/null
@@ -1,61 +0,0 @@
-/*******************************************************************************
-
-  Header file for stmmac platform data
-
-  Copyright (C) 2009  STMicroelectronics Ltd
-
-  This program is free software; you can redistribute it and/or modify it
-  under the terms and conditions of the GNU General Public License,
-  version 2, as published by the Free Software Foundation.
-
-  This program is distributed in the hope it will be useful, but WITHOUT
-  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
-  more details.
-
-  You should have received a copy of the GNU General Public License along with
-  this program; if not, write to the Free Software Foundation, Inc.,
-  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
-  The full GNU General Public License is included in this distribution in
-  the file called "COPYING".
-
-  Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
-*******************************************************************************/
-
-#ifndef __STMMAC_PLATFORM_DATA
-#define __STMMAC_PLATFORM_DATA
-
-#include <linux/platform_device.h>
-
-/* Platfrom data for platform device structure's platform_data field */
-
-struct stmmac_mdio_bus_data {
-	int bus_id;
-	int (*phy_reset)(void *priv);
-	unsigned int phy_mask;
-	int *irqs;
-	int probed_phy_irq;
-};
-
-struct plat_stmmacenet_data {
-	int bus_id;
-	int phy_addr;
-	int interface;
-	struct stmmac_mdio_bus_data *mdio_bus_data;
-	int pbl;
-	int clk_csr;
-	int has_gmac;
-	int enh_desc;
-	int tx_coe;
-	int bugged_jumbo;
-	int pmt;
-	int force_sf_dma_mode;
-	void (*fix_mac_speed)(void *priv, unsigned int speed);
-	void (*bus_setup)(void __iomem *ioaddr);
-	int (*init)(struct platform_device *pdev);
-	void (*exit)(struct platform_device *pdev);
-	void *custom_cfg;
-	void *bsp_priv;
-};
-#endif
diff --git a/ANDROID_3.4.5/include/linux/stop_machine.h b/ANDROID_3.4.5/include/linux/stop_machine.h
deleted file mode 100644
index 3b5e910d..00000000
--- a/ANDROID_3.4.5/include/linux/stop_machine.h
+++ /dev/null
@@ -1,156 +0,0 @@
-#ifndef _LINUX_STOP_MACHINE
-#define _LINUX_STOP_MACHINE
-
-#include <linux/cpu.h>
-#include <linux/cpumask.h>
-#include <linux/smp.h>
-#include <linux/list.h>
-
-/*
- * stop_cpu[s]() is simplistic per-cpu maximum priority cpu
- * monopolization mechanism.  The caller can specify a non-sleeping
- * function to be executed on a single or multiple cpus preempting all
- * other processes and monopolizing those cpus until it finishes.
- *
- * Resources for this mechanism are preallocated when a cpu is brought
- * up and requests are guaranteed to be served as long as the target
- * cpus are online.
- */
-typedef int (*cpu_stop_fn_t)(void *arg);
-
-#ifdef CONFIG_SMP
-
-struct cpu_stop_work {
-	struct list_head	list;		/* cpu_stopper->works */
-	cpu_stop_fn_t		fn;
-	void			*arg;
-	struct cpu_stop_done	*done;
-};
-
-int stop_one_cpu(unsigned int cpu, cpu_stop_fn_t fn, void *arg);
-void stop_one_cpu_nowait(unsigned int cpu, cpu_stop_fn_t fn, void *arg,
-			 struct cpu_stop_work *work_buf);
-int stop_cpus(const struct cpumask *cpumask, cpu_stop_fn_t fn, void *arg);
-int try_stop_cpus(const struct cpumask *cpumask, cpu_stop_fn_t fn, void *arg);
-
-#else	/* CONFIG_SMP */
-
-#include <linux/workqueue.h>
-
-struct cpu_stop_work {
-	struct work_struct	work;
-	cpu_stop_fn_t		fn;
-	void			*arg;
-};
-
-static inline int stop_one_cpu(unsigned int cpu, cpu_stop_fn_t fn, void *arg)
-{
-	int ret = -ENOENT;
-	preempt_disable();
-	if (cpu == smp_processor_id())
-		ret = fn(arg);
-	preempt_enable();
-	return ret;
-}
-
-static void stop_one_cpu_nowait_workfn(struct work_struct *work)
-{
-	struct cpu_stop_work *stwork =
-		container_of(work, struct cpu_stop_work, work);
-	preempt_disable();
-	stwork->fn(stwork->arg);
-	preempt_enable();
-}
-
-static inline void stop_one_cpu_nowait(unsigned int cpu,
-				       cpu_stop_fn_t fn, void *arg,
-				       struct cpu_stop_work *work_buf)
-{
-	if (cpu == smp_processor_id()) {
-		INIT_WORK(&work_buf->work, stop_one_cpu_nowait_workfn);
-		work_buf->fn = fn;
-		work_buf->arg = arg;
-		schedule_work(&work_buf->work);
-	}
-}
-
-static inline int stop_cpus(const struct cpumask *cpumask,
-			    cpu_stop_fn_t fn, void *arg)
-{
-	if (cpumask_test_cpu(raw_smp_processor_id(), cpumask))
-		return stop_one_cpu(raw_smp_processor_id(), fn, arg);
-	return -ENOENT;
-}
-
-static inline int try_stop_cpus(const struct cpumask *cpumask,
-				cpu_stop_fn_t fn, void *arg)
-{
-	return stop_cpus(cpumask, fn, arg);
-}
-
-#endif	/* CONFIG_SMP */
-
-/*
- * stop_machine "Bogolock": stop the entire machine, disable
- * interrupts.  This is a very heavy lock, which is equivalent to
- * grabbing every spinlock (and more).  So the "read" side to such a
- * lock is anything which disables preemption.
- */
-#if defined(CONFIG_STOP_MACHINE) && defined(CONFIG_SMP)
-
-/**
- * stop_machine: freeze the machine on all CPUs and run this function
- * @fn: the function to run
- * @data: the data ptr for the @fn()
- * @cpus: the cpus to run the @fn() on (NULL = any online cpu)
- *
- * Description: This causes a thread to be scheduled on every cpu,
- * each of which disables interrupts.  The result is that no one is
- * holding a spinlock or inside any other preempt-disabled region when
- * @fn() runs.
- *
- * This can be thought of as a very heavy write lock, equivalent to
- * grabbing every spinlock in the kernel. */
-int stop_machine(int (*fn)(void *), void *data, const struct cpumask *cpus);
-
-/**
- * __stop_machine: freeze the machine on all CPUs and run this function
- * @fn: the function to run
- * @data: the data ptr for the @fn
- * @cpus: the cpus to run the @fn() on (NULL = any online cpu)
- *
- * Description: This is a special version of the above, which assumes cpus
- * won't come or go while it's being called.  Used by hotplug cpu.
- */
-int __stop_machine(int (*fn)(void *), void *data, const struct cpumask *cpus);
-
-int stop_machine_from_inactive_cpu(int (*fn)(void *), void *data,
-				   const struct cpumask *cpus);
-
-#else	 /* CONFIG_STOP_MACHINE && CONFIG_SMP */
-
-static inline int __stop_machine(int (*fn)(void *), void *data,
-				 const struct cpumask *cpus)
-{
-	unsigned long flags;
-	int ret;
-	local_irq_save(flags);
-	ret = fn(data);
-	local_irq_restore(flags);
-	return ret;
-}
-
-static inline int stop_machine(int (*fn)(void *), void *data,
-			       const struct cpumask *cpus)
-{
-	return __stop_machine(fn, data, cpus);
-}
-
-static inline int stop_machine_from_inactive_cpu(int (*fn)(void *), void *data,
-						 const struct cpumask *cpus)
-{
-	return __stop_machine(fn, data, cpus);
-}
-
-#endif	/* CONFIG_STOP_MACHINE && CONFIG_SMP */
-#endif	/* _LINUX_STOP_MACHINE */
diff --git a/ANDROID_3.4.5/include/linux/string.h b/ANDROID_3.4.5/include/linux/string.h
deleted file mode 100644
index e033564f..00000000
--- a/ANDROID_3.4.5/include/linux/string.h
+++ /dev/null
@@ -1,148 +0,0 @@
-#ifndef _LINUX_STRING_H_
-#define _LINUX_STRING_H_
-
-/* We don't want strings.h stuff being used by user stuff by accident */
-
-#ifndef __KERNEL__
-#include <string.h>
-#else
-
-#include <linux/compiler.h>	/* for inline */
-#include <linux/types.h>	/* for size_t */
-#include <linux/stddef.h>	/* for NULL */
-#include <stdarg.h>
-
-extern char *strndup_user(const char __user *, long);
-extern void *memdup_user(const void __user *, size_t);
-
-/*
- * Include machine specific inline routines
- */
-#include <asm/string.h>
-
-#ifndef __HAVE_ARCH_STRCPY
-extern char * strcpy(char *,const char *);
-#endif
-#ifndef __HAVE_ARCH_STRNCPY
-extern char * strncpy(char *,const char *, __kernel_size_t);
-#endif
-#ifndef __HAVE_ARCH_STRLCPY
-size_t strlcpy(char *, const char *, size_t);
-#endif
-#ifndef __HAVE_ARCH_STRCAT
-extern char * strcat(char *, const char *);
-#endif
-#ifndef __HAVE_ARCH_STRNCAT
-extern char * strncat(char *, const char *, __kernel_size_t);
-#endif
-#ifndef __HAVE_ARCH_STRLCAT
-extern size_t strlcat(char *, const char *, __kernel_size_t);
-#endif
-#ifndef __HAVE_ARCH_STRCMP
-extern int strcmp(const char *,const char *);
-#endif
-#ifndef __HAVE_ARCH_STRNCMP
-extern int strncmp(const char *,const char *,__kernel_size_t);
-#endif
-#ifndef __HAVE_ARCH_STRNICMP
-extern int strnicmp(const char *, const char *, __kernel_size_t);
-#endif
-#ifndef __HAVE_ARCH_STRCASECMP
-extern int strcasecmp(const char *s1, const char *s2);
-#endif
-#ifndef __HAVE_ARCH_STRNCASECMP
-extern int strncasecmp(const char *s1, const char *s2, size_t n);
-#endif
-#ifndef __HAVE_ARCH_STRCHR
-extern char * strchr(const char *,int);
-#endif
-#ifndef __HAVE_ARCH_STRNCHR
-extern char * strnchr(const char *, size_t, int);
-#endif
-#ifndef __HAVE_ARCH_STRRCHR
-extern char * strrchr(const char *,int);
-#endif
-extern char * __must_check skip_spaces(const char *);
-
-extern char *strim(char *);
-
-static inline __must_check char *strstrip(char *str)
-{
-	return strim(str);
-}
-
-#ifndef __HAVE_ARCH_STRSTR
-extern char * strstr(const char *, const char *);
-#endif
-#ifndef __HAVE_ARCH_STRNSTR
-extern char * strnstr(const char *, const char *, size_t);
-#endif
-#ifndef __HAVE_ARCH_STRLEN
-extern __kernel_size_t strlen(const char *);
-#endif
-#ifndef __HAVE_ARCH_STRNLEN
-extern __kernel_size_t strnlen(const char *,__kernel_size_t);
-#endif
-#ifndef __HAVE_ARCH_STRPBRK
-extern char * strpbrk(const char *,const char *);
-#endif
-#ifndef __HAVE_ARCH_STRSEP
-extern char * strsep(char **,const char *);
-#endif
-#ifndef __HAVE_ARCH_STRSPN
-extern __kernel_size_t strspn(const char *,const char *);
-#endif
-#ifndef __HAVE_ARCH_STRCSPN
-extern __kernel_size_t strcspn(const char *,const char *);
-#endif
-
-#ifndef __HAVE_ARCH_MEMSET
-extern void * memset(void *,int,__kernel_size_t);
-#endif
-#ifndef __HAVE_ARCH_MEMCPY
-extern void * memcpy(void *,const void *,__kernel_size_t);
-#endif
-#ifndef __HAVE_ARCH_MEMMOVE
-extern void * memmove(void *,const void *,__kernel_size_t);
-#endif
-#ifndef __HAVE_ARCH_MEMSCAN
-extern void * memscan(void *,int,__kernel_size_t);
-#endif
-#ifndef __HAVE_ARCH_MEMCMP
-extern int memcmp(const void *,const void *,__kernel_size_t);
-#endif
-#ifndef __HAVE_ARCH_MEMCHR
-extern void * memchr(const void *,int,__kernel_size_t);
-#endif
-void *memchr_inv(const void *s, int c, size_t n);
-
-extern char *kstrdup(const char *s, gfp_t gfp);
-extern char *kstrndup(const char *s, size_t len, gfp_t gfp);
-extern void *kmemdup(const void *src, size_t len, gfp_t gfp);
-
-extern char **argv_split(gfp_t gfp, const char *str, int *argcp);
-extern void argv_free(char **argv);
-
-extern bool sysfs_streq(const char *s1, const char *s2);
-extern int strtobool(const char *s, bool *res);
-
-#ifdef CONFIG_BINARY_PRINTF
-int vbin_printf(u32 *bin_buf, size_t size, const char *fmt, va_list args);
-int bstr_printf(char *buf, size_t size, const char *fmt, const u32 *bin_buf);
-int bprintf(u32 *bin_buf, size_t size, const char *fmt, ...) __printf(3, 4);
-#endif
-
-extern ssize_t memory_read_from_buffer(void *to, size_t count, loff_t *ppos,
-			const void *from, size_t available);
-
-/**
- * strstarts - does @str start with @prefix?
- * @str: string to examine
- * @prefix: prefix to look for.
- */
-static inline bool strstarts(const char *str, const char *prefix)
-{
-	return strncmp(str, prefix, strlen(prefix)) == 0;
-}
-#endif
-#endif /* _LINUX_STRING_H_ */
diff --git a/ANDROID_3.4.5/include/linux/string_helpers.h b/ANDROID_3.4.5/include/linux/string_helpers.h
deleted file mode 100644
index a3eb2f65..00000000
--- a/ANDROID_3.4.5/include/linux/string_helpers.h
+++ /dev/null
@@ -1,16 +0,0 @@
-#ifndef _LINUX_STRING_HELPERS_H_
-#define _LINUX_STRING_HELPERS_H_
-
-#include <linux/types.h>
-
-/* Descriptions of the types of units to
- * print in */
-enum string_size_units {
-	STRING_UNITS_10,	/* use powers of 10^3 (standard SI) */
-	STRING_UNITS_2,		/* use binary powers of 2^10 */
-};
-
-int string_get_size(u64 size, enum string_size_units units,
-		    char *buf, int len);
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/stringify.h b/ANDROID_3.4.5/include/linux/stringify.h
deleted file mode 100644
index 841cec8e..00000000
--- a/ANDROID_3.4.5/include/linux/stringify.h
+++ /dev/null
@@ -1,12 +0,0 @@
-#ifndef __LINUX_STRINGIFY_H
-#define __LINUX_STRINGIFY_H
-
-/* Indirect stringification.  Doing two levels allows the parameter to be a
- * macro itself.  For example, compile with -DFOO=bar, __stringify(FOO)
- * converts to "bar".
- */
-
-#define __stringify_1(x...)	#x
-#define __stringify(x...)	__stringify_1(x)
-
-#endif	/* !__LINUX_STRINGIFY_H */
diff --git a/ANDROID_3.4.5/include/linux/sungem_phy.h b/ANDROID_3.4.5/include/linux/sungem_phy.h
deleted file mode 100644
index bd9be9f5..00000000
--- a/ANDROID_3.4.5/include/linux/sungem_phy.h
+++ /dev/null
@@ -1,132 +0,0 @@
-#ifndef __SUNGEM_PHY_H__
-#define __SUNGEM_PHY_H__
-
-struct mii_phy;
-
-/* Operations supported by any kind of PHY */
-struct mii_phy_ops
-{
-	int		(*init)(struct mii_phy *phy);
-	int		(*suspend)(struct mii_phy *phy);
-	int		(*setup_aneg)(struct mii_phy *phy, u32 advertise);
-	int		(*setup_forced)(struct mii_phy *phy, int speed, int fd);
-	int		(*poll_link)(struct mii_phy *phy);
-	int		(*read_link)(struct mii_phy *phy);
-	int		(*enable_fiber)(struct mii_phy *phy, int autoneg);
-};
-
-/* Structure used to statically define an mii/gii based PHY */
-struct mii_phy_def
-{
-	u32				phy_id;		/* Concatenated ID1 << 16 | ID2 */
-	u32				phy_id_mask;	/* Significant bits */
-	u32				features;	/* Ethtool SUPPORTED_* defines */
-	int				magic_aneg;	/* Autoneg does all speed test for us */
-	const char*			name;
-	const struct mii_phy_ops*	ops;
-};
-
-enum {
-	BCM54XX_COPPER,
-	BCM54XX_FIBER,
-	BCM54XX_GBIC,
-	BCM54XX_SGMII,
-	BCM54XX_UNKNOWN,
-};
-
-/* An instance of a PHY, partially borrowed from mii_if_info */
-struct mii_phy
-{
-	struct mii_phy_def*	def;
-	u32			advertising;
-	int			mii_id;
-
-	/* 1: autoneg enabled, 0: disabled */
-	int			autoneg;
-
-	/* forced speed & duplex (no autoneg)
-	 * partner speed & duplex & pause (autoneg)
-	 */
-	int			speed;
-	int			duplex;
-	int			pause;
-
-	/* Provided by host chip */
-	struct net_device	*dev;
-	int (*mdio_read) (struct net_device *dev, int mii_id, int reg);
-	void (*mdio_write) (struct net_device *dev, int mii_id, int reg, int val);
-	void			*platform_data;
-};
-
-/* Pass in a struct mii_phy with dev, mdio_read and mdio_write
- * filled, the remaining fields will be filled on return
- */
-extern int sungem_phy_probe(struct mii_phy *phy, int mii_id);
-
-
-/* MII definitions missing from mii.h */
-
-#define BMCR_SPD2	0x0040		/* Gigabit enable (bcm54xx)	*/
-#define LPA_PAUSE	0x0400
-
-/* More PHY registers (model specific) */
-
-/* MII BCM5201 MULTIPHY interrupt register */
-#define MII_BCM5201_INTERRUPT			0x1A
-#define MII_BCM5201_INTERRUPT_INTENABLE		0x4000
-
-#define MII_BCM5201_AUXMODE2			0x1B
-#define MII_BCM5201_AUXMODE2_LOWPOWER		0x0008
-
-#define MII_BCM5201_MULTIPHY                    0x1E
-
-/* MII BCM5201 MULTIPHY register bits */
-#define MII_BCM5201_MULTIPHY_SERIALMODE         0x0002
-#define MII_BCM5201_MULTIPHY_SUPERISOLATE       0x0008
-
-/* MII BCM5221 Additional registers */
-#define MII_BCM5221_TEST			0x1f
-#define MII_BCM5221_TEST_ENABLE_SHADOWS		0x0080
-#define MII_BCM5221_SHDOW_AUX_STAT2		0x1b
-#define MII_BCM5221_SHDOW_AUX_STAT2_APD		0x0020
-#define MII_BCM5221_SHDOW_AUX_MODE4		0x1a
-#define MII_BCM5221_SHDOW_AUX_MODE4_IDDQMODE	0x0001
-#define MII_BCM5221_SHDOW_AUX_MODE4_CLKLOPWR	0x0004
-
-/* MII BCM5241 Additional registers */
-#define MII_BCM5241_SHDOW_AUX_MODE4_STANDBYPWR	0x0008
-
-/* MII BCM5400 1000-BASET Control register */
-#define MII_BCM5400_GB_CONTROL			0x09
-#define MII_BCM5400_GB_CONTROL_FULLDUPLEXCAP	0x0200
-
-/* MII BCM5400 AUXCONTROL register */
-#define MII_BCM5400_AUXCONTROL                  0x18
-#define MII_BCM5400_AUXCONTROL_PWR10BASET       0x0004
-
-/* MII BCM5400 AUXSTATUS register */
-#define MII_BCM5400_AUXSTATUS                   0x19
-#define MII_BCM5400_AUXSTATUS_LINKMODE_MASK     0x0700
-#define MII_BCM5400_AUXSTATUS_LINKMODE_SHIFT    8
-
-/* 1000BT control (Marvell & BCM54xx at least) */
-#define MII_1000BASETCONTROL			0x09
-#define MII_1000BASETCONTROL_FULLDUPLEXCAP	0x0200
-#define MII_1000BASETCONTROL_HALFDUPLEXCAP	0x0100
-
-/* Marvell 88E1011 PHY control */
-#define MII_M1011_PHY_SPEC_CONTROL		0x10
-#define MII_M1011_PHY_SPEC_CONTROL_MANUAL_MDIX	0x20
-#define MII_M1011_PHY_SPEC_CONTROL_AUTO_MDIX	0x40
-
-/* Marvell 88E1011 PHY status */
-#define MII_M1011_PHY_SPEC_STATUS		0x11
-#define MII_M1011_PHY_SPEC_STATUS_1000		0x8000
-#define MII_M1011_PHY_SPEC_STATUS_100		0x4000
-#define MII_M1011_PHY_SPEC_STATUS_SPD_MASK	0xc000
-#define MII_M1011_PHY_SPEC_STATUS_FULLDUPLEX	0x2000
-#define MII_M1011_PHY_SPEC_STATUS_RESOLVED	0x0800
-#define MII_M1011_PHY_SPEC_STATUS_TX_PAUSE	0x0008
-#define MII_M1011_PHY_SPEC_STATUS_RX_PAUSE	0x0004
-
-#endif /* __SUNGEM_PHY_H__ */
diff --git a/ANDROID_3.4.5/include/linux/sunrpc/Kbuild b/ANDROID_3.4.5/include/linux/sunrpc/Kbuild
deleted file mode 100644
index 98df2116..00000000
--- a/ANDROID_3.4.5/include/linux/sunrpc/Kbuild
+++ /dev/null
@@ -1 +0,0 @@
-header-y += debug.h
diff --git a/ANDROID_3.4.5/include/linux/sunrpc/auth.h b/ANDROID_3.4.5/include/linux/sunrpc/auth.h
deleted file mode 100644
index 492a36d7..00000000
--- a/ANDROID_3.4.5/include/linux/sunrpc/auth.h
+++ /dev/null
@@ -1,162 +0,0 @@
-/*
- * linux/include/linux/sunrpc/auth.h
- *
- * Declarations for the RPC client authentication machinery.
- *
- * Copyright (C) 1996, Olaf Kirch <okir@monad.swb.de>
- */
-
-#ifndef _LINUX_SUNRPC_AUTH_H
-#define _LINUX_SUNRPC_AUTH_H
-
-#ifdef __KERNEL__
-
-#include <linux/sunrpc/sched.h>
-#include <linux/sunrpc/msg_prot.h>
-#include <linux/sunrpc/xdr.h>
-
-#include <linux/atomic.h>
-#include <linux/rcupdate.h>
-
-/* size of the nodename buffer */
-#define UNX_MAXNODENAME	32
-
-/* Work around the lack of a VFS credential */
-struct auth_cred {
-	uid_t	uid;
-	gid_t	gid;
-	struct group_info *group_info;
-	const char *principal;
-	unsigned char machine_cred : 1;
-};
-
-/*
- * Client user credentials
- */
-struct rpc_auth;
-struct rpc_credops;
-struct rpc_cred {
-	struct hlist_node	cr_hash;	/* hash chain */
-	struct list_head	cr_lru;		/* lru garbage collection */
-	struct rcu_head		cr_rcu;
-	struct rpc_auth *	cr_auth;
-	const struct rpc_credops *cr_ops;
-#ifdef RPC_DEBUG
-	unsigned long		cr_magic;	/* 0x0f4aa4f0 */
-#endif
-	unsigned long		cr_expire;	/* when to gc */
-	unsigned long		cr_flags;	/* various flags */
-	atomic_t		cr_count;	/* ref count */
-
-	uid_t			cr_uid;
-
-	/* per-flavor data */
-};
-#define RPCAUTH_CRED_NEW	0
-#define RPCAUTH_CRED_UPTODATE	1
-#define RPCAUTH_CRED_HASHED	2
-#define RPCAUTH_CRED_NEGATIVE	3
-
-#define RPCAUTH_CRED_MAGIC	0x0f4aa4f0
-
-/*
- * Client authentication handle
- */
-struct rpc_cred_cache;
-struct rpc_authops;
-struct rpc_auth {
-	unsigned int		au_cslack;	/* call cred size estimate */
-				/* guess at number of u32's auth adds before
-				 * reply data; normally the verifier size: */
-	unsigned int		au_rslack;
-				/* for gss, used to calculate au_rslack: */
-	unsigned int		au_verfsize;
-
-	unsigned int		au_flags;	/* various flags */
-	const struct rpc_authops *au_ops;		/* operations */
-	rpc_authflavor_t	au_flavor;	/* pseudoflavor (note may
-						 * differ from the flavor in
-						 * au_ops->au_flavor in gss
-						 * case) */
-	atomic_t		au_count;	/* Reference counter */
-
-	struct rpc_cred_cache *	au_credcache;
-	/* per-flavor data */
-};
-
-/* Flags for rpcauth_lookupcred() */
-#define RPCAUTH_LOOKUP_NEW		0x01	/* Accept an uninitialised cred */
-
-/*
- * Client authentication ops
- */
-struct rpc_authops {
-	struct module		*owner;
-	rpc_authflavor_t	au_flavor;	/* flavor (RPC_AUTH_*) */
-	char *			au_name;
-	struct rpc_auth *	(*create)(struct rpc_clnt *, rpc_authflavor_t);
-	void			(*destroy)(struct rpc_auth *);
-
-	struct rpc_cred *	(*lookup_cred)(struct rpc_auth *, struct auth_cred *, int);
-	struct rpc_cred *	(*crcreate)(struct rpc_auth*, struct auth_cred *, int);
-	int			(*pipes_create)(struct rpc_auth *);
-	void			(*pipes_destroy)(struct rpc_auth *);
-};
-
-struct rpc_credops {
-	const char *		cr_name;	/* Name of the auth flavour */
-	int			(*cr_init)(struct rpc_auth *, struct rpc_cred *);
-	void			(*crdestroy)(struct rpc_cred *);
-
-	int			(*crmatch)(struct auth_cred *, struct rpc_cred *, int);
-	struct rpc_cred *	(*crbind)(struct rpc_task *, struct rpc_cred *, int);
-	__be32 *		(*crmarshal)(struct rpc_task *, __be32 *);
-	int			(*crrefresh)(struct rpc_task *);
-	__be32 *		(*crvalidate)(struct rpc_task *, __be32 *);
-	int			(*crwrap_req)(struct rpc_task *, kxdreproc_t,
-						void *, __be32 *, void *);
-	int			(*crunwrap_resp)(struct rpc_task *, kxdrdproc_t,
-						void *, __be32 *, void *);
-};
-
-extern const struct rpc_authops	authunix_ops;
-extern const struct rpc_authops	authnull_ops;
-
-int __init		rpc_init_authunix(void);
-int __init		rpc_init_generic_auth(void);
-int __init		rpcauth_init_module(void);
-void			rpcauth_remove_module(void);
-void			rpc_destroy_generic_auth(void);
-void 			rpc_destroy_authunix(void);
-
-struct rpc_cred *	rpc_lookup_cred(void);
-struct rpc_cred *	rpc_lookup_machine_cred(const char *service_name);
-int			rpcauth_register(const struct rpc_authops *);
-int			rpcauth_unregister(const struct rpc_authops *);
-struct rpc_auth *	rpcauth_create(rpc_authflavor_t, struct rpc_clnt *);
-void			rpcauth_release(struct rpc_auth *);
-struct rpc_cred *	rpcauth_lookup_credcache(struct rpc_auth *, struct auth_cred *, int);
-void			rpcauth_init_cred(struct rpc_cred *, const struct auth_cred *, struct rpc_auth *, const struct rpc_credops *);
-struct rpc_cred *	rpcauth_lookupcred(struct rpc_auth *, int);
-struct rpc_cred *	rpcauth_generic_bind_cred(struct rpc_task *, struct rpc_cred *, int);
-void			put_rpccred(struct rpc_cred *);
-__be32 *		rpcauth_marshcred(struct rpc_task *, __be32 *);
-__be32 *		rpcauth_checkverf(struct rpc_task *, __be32 *);
-int			rpcauth_wrap_req(struct rpc_task *task, kxdreproc_t encode, void *rqstp, __be32 *data, void *obj);
-int			rpcauth_unwrap_resp(struct rpc_task *task, kxdrdproc_t decode, void *rqstp, __be32 *data, void *obj);
-int			rpcauth_refreshcred(struct rpc_task *);
-void			rpcauth_invalcred(struct rpc_task *);
-int			rpcauth_uptodatecred(struct rpc_task *);
-int			rpcauth_init_credcache(struct rpc_auth *);
-void			rpcauth_destroy_credcache(struct rpc_auth *);
-void			rpcauth_clear_credcache(struct rpc_cred_cache *);
-
-static inline
-struct rpc_cred *	get_rpccred(struct rpc_cred *cred)
-{
-	atomic_inc(&cred->cr_count);
-	return cred;
-}
-
-#endif /* __KERNEL__ */
-#endif /* _LINUX_SUNRPC_AUTH_H */
diff --git a/ANDROID_3.4.5/include/linux/sunrpc/auth_gss.h b/ANDROID_3.4.5/include/linux/sunrpc/auth_gss.h
deleted file mode 100644
index f1cfd4c8..00000000
--- a/ANDROID_3.4.5/include/linux/sunrpc/auth_gss.h
+++ /dev/null
@@ -1,91 +0,0 @@
-/*
- * linux/include/linux/sunrpc/auth_gss.h
- *
- * Declarations for RPCSEC_GSS
- *
- * Dug Song <dugsong@monkey.org>
- * Andy Adamson <andros@umich.edu>
- * Bruce Fields <bfields@umich.edu>
- * Copyright (c) 2000 The Regents of the University of Michigan
- */
-
-#ifndef _LINUX_SUNRPC_AUTH_GSS_H
-#define _LINUX_SUNRPC_AUTH_GSS_H
-
-#ifdef __KERNEL__
-#include <linux/sunrpc/auth.h>
-#include <linux/sunrpc/svc.h>
-#include <linux/sunrpc/gss_api.h>
-
-#define RPC_GSS_VERSION		1
-
-#define MAXSEQ 0x80000000 /* maximum legal sequence number, from rfc 2203 */
-
-enum rpc_gss_proc {
-	RPC_GSS_PROC_DATA = 0,
-	RPC_GSS_PROC_INIT = 1,
-	RPC_GSS_PROC_CONTINUE_INIT = 2,
-	RPC_GSS_PROC_DESTROY = 3
-};
-
-enum rpc_gss_svc {
-	RPC_GSS_SVC_NONE = 1,
-	RPC_GSS_SVC_INTEGRITY = 2,
-	RPC_GSS_SVC_PRIVACY = 3
-};
-
-/* on-the-wire gss cred: */
-struct rpc_gss_wire_cred {
-	u32			gc_v;		/* version */
-	u32			gc_proc;	/* control procedure */
-	u32			gc_seq;		/* sequence number */
-	u32			gc_svc;		/* service */
-	struct xdr_netobj	gc_ctx;		/* context handle */
-};
-
-/* on-the-wire gss verifier: */
-struct rpc_gss_wire_verf {
-	u32			gv_flavor;
-	struct xdr_netobj	gv_verf;
-};
-
-/* return from gss NULL PROC init sec context */
-struct rpc_gss_init_res {
-	struct xdr_netobj	gr_ctx;		/* context handle */
-	u32			gr_major;	/* major status */
-	u32			gr_minor;	/* minor status */
-	u32			gr_win;		/* sequence window */
-	struct xdr_netobj	gr_token;	/* token */
-};
-
-/* The gss_cl_ctx struct holds all the information the rpcsec_gss client
- * code needs to know about a single security context.  In particular,
- * gc_gss_ctx is the context handle that is used to do gss-api calls, while
- * gc_wire_ctx is the context handle that is used to identify the context on
- * the wire when communicating with a server. */
-
-struct gss_cl_ctx {
-	atomic_t		count;
-	enum rpc_gss_proc	gc_proc;
-	u32			gc_seq;
-	spinlock_t		gc_seq_lock;
-	struct gss_ctx __rcu	*gc_gss_ctx;
-	struct xdr_netobj	gc_wire_ctx;
-	u32			gc_win;
-	unsigned long		gc_expiry;
-	struct rcu_head		gc_rcu;
-};
-
-struct gss_upcall_msg;
-struct gss_cred {
-	struct rpc_cred		gc_base;
-	enum rpc_gss_svc	gc_service;
-	struct gss_cl_ctx __rcu	*gc_ctx;
-	struct gss_upcall_msg	*gc_upcall;
-	const char		*gc_principal;
-	unsigned long		gc_upcall_timestamp;
-};
-
-#endif /* __KERNEL__ */
-#endif /* _LINUX_SUNRPC_AUTH_GSS_H */
-
diff --git a/ANDROID_3.4.5/include/linux/sunrpc/bc_xprt.h b/ANDROID_3.4.5/include/linux/sunrpc/bc_xprt.h
deleted file mode 100644
index 969c0a67..00000000
--- a/ANDROID_3.4.5/include/linux/sunrpc/bc_xprt.h
+++ /dev/null
@@ -1,67 +0,0 @@
-/******************************************************************************
-
-(c) 2008 NetApp.  All Rights Reserved.
-
-NetApp provides this source code under the GPL v2 License.
-The GPL v2 license is available at
-http://opensource.org/licenses/gpl-license.php.
-
-THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
-CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
-EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
-PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
-LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
-NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-******************************************************************************/
-
-/*
- * Functions to create and manage the backchannel
- */
-
-#ifndef _LINUX_SUNRPC_BC_XPRT_H
-#define _LINUX_SUNRPC_BC_XPRT_H
-
-#include <linux/sunrpc/svcsock.h>
-#include <linux/sunrpc/xprt.h>
-#include <linux/sunrpc/sched.h>
-
-#ifdef CONFIG_SUNRPC_BACKCHANNEL
-struct rpc_rqst *xprt_alloc_bc_request(struct rpc_xprt *xprt);
-void xprt_free_bc_request(struct rpc_rqst *req);
-int xprt_setup_backchannel(struct rpc_xprt *, unsigned int min_reqs);
-void xprt_destroy_backchannel(struct rpc_xprt *, unsigned int max_reqs);
-int bc_send(struct rpc_rqst *req);
-
-/*
- * Determine if a shared backchannel is in use
- */
-static inline int svc_is_backchannel(const struct svc_rqst *rqstp)
-{
-	if (rqstp->rq_server->sv_bc_xprt)
-		return 1;
-	return 0;
-}
-#else /* CONFIG_SUNRPC_BACKCHANNEL */
-static inline int xprt_setup_backchannel(struct rpc_xprt *xprt,
-					 unsigned int min_reqs)
-{
-	return 0;
-}
-
-static inline int svc_is_backchannel(const struct svc_rqst *rqstp)
-{
-	return 0;
-}
-
-static inline void xprt_free_bc_request(struct rpc_rqst *req)
-{
-}
-#endif /* CONFIG_SUNRPC_BACKCHANNEL */
-#endif /* _LINUX_SUNRPC_BC_XPRT_H */
-
diff --git a/ANDROID_3.4.5/include/linux/sunrpc/cache.h b/ANDROID_3.4.5/include/linux/sunrpc/cache.h
deleted file mode 100644
index f5fd6160..00000000
--- a/ANDROID_3.4.5/include/linux/sunrpc/cache.h
+++ /dev/null
@@ -1,263 +0,0 @@
-/*
- * include/linux/sunrpc/cache.h
- *
- * Generic code for various authentication-related caches
- * used by sunrpc clients and servers.
- *
- * Copyright (C) 2002 Neil Brown <neilb@cse.unsw.edu.au>
- *
- * Released under terms in GPL version 2.  See COPYING.
- *
- */
-
-#ifndef _LINUX_SUNRPC_CACHE_H_
-#define _LINUX_SUNRPC_CACHE_H_
-
-#include <linux/kref.h>
-#include <linux/slab.h>
-#include <linux/atomic.h>
-#include <linux/proc_fs.h>
-
-/*
- * Each cache requires:
- *  - A 'struct cache_detail' which contains information specific to the cache
- *    for common code to use.
- *  - An item structure that must contain a "struct cache_head"
- *  - A lookup function defined using DefineCacheLookup
- *  - A 'put' function that can release a cache item. It will only
- *    be called after cache_put has succeed, so there are guarantee
- *    to be no references.
- *  - A function to calculate a hash of an item's key.
- *
- * as well as assorted code fragments (e.g. compare keys) and numbers
- * (e.g. hash size, goal_age, etc).
- *
- * Each cache must be registered so that it can be cleaned regularly.
- * When the cache is unregistered, it is flushed completely.
- *
- * Entries have a ref count and a 'hashed' flag which counts the existence
- * in the hash table.
- * We only expire entries when refcount is zero.
- * Existence in the cache is counted  the refcount.
- */
-
-/* Every cache item has a common header that is used
- * for expiring and refreshing entries.
- * 
- */
-struct cache_head {
-	struct cache_head * next;
-	time_t		expiry_time;	/* After time time, don't use the data */
-	time_t		last_refresh;   /* If CACHE_PENDING, this is when upcall 
-					 * was sent, else this is when update was received
-					 */
-	struct kref	ref;
-	unsigned long	flags;
-};
-#define	CACHE_VALID	0	/* Entry contains valid data */
-#define	CACHE_NEGATIVE	1	/* Negative entry - there is no match for the key */
-#define	CACHE_PENDING	2	/* An upcall has been sent but no reply received yet*/
-
-#define	CACHE_NEW_EXPIRY 120	/* keep new things pending confirmation for 120 seconds */
-
-struct cache_detail_procfs {
-	struct proc_dir_entry	*proc_ent;
-	struct proc_dir_entry   *flush_ent, *channel_ent, *content_ent;
-};
-
-struct cache_detail_pipefs {
-	struct dentry *dir;
-};
-
-struct cache_detail {
-	struct module *		owner;
-	int			hash_size;
-	struct cache_head **	hash_table;
-	rwlock_t		hash_lock;
-
-	atomic_t		inuse; /* active user-space update or lookup */
-
-	char			*name;
-	void			(*cache_put)(struct kref *);
-
-	int			(*cache_upcall)(struct cache_detail *,
-						struct cache_head *);
-
-	int			(*cache_parse)(struct cache_detail *,
-					       char *buf, int len);
-
-	int			(*cache_show)(struct seq_file *m,
-					      struct cache_detail *cd,
-					      struct cache_head *h);
-	void			(*warn_no_listener)(struct cache_detail *cd,
-					      int has_died);
-
-	struct cache_head *	(*alloc)(void);
-	int			(*match)(struct cache_head *orig, struct cache_head *new);
-	void			(*init)(struct cache_head *orig, struct cache_head *new);
-	void			(*update)(struct cache_head *orig, struct cache_head *new);
-
-	/* fields below this comment are for internal use
-	 * and should not be touched by cache owners
-	 */
-	time_t			flush_time;		/* flush all cache items with last_refresh
-							 * earlier than this */
-	struct list_head	others;
-	time_t			nextcheck;
-	int			entries;
-
-	/* fields for communication over channel */
-	struct list_head	queue;
-
-	atomic_t		readers;		/* how many time is /chennel open */
-	time_t			last_close;		/* if no readers, when did last close */
-	time_t			last_warn;		/* when we last warned about no readers */
-
-	union {
-		struct cache_detail_procfs procfs;
-		struct cache_detail_pipefs pipefs;
-	} u;
-	struct net		*net;
-};
-
-
-/* this must be embedded in any request structure that
- * identifies an object that will want a callback on
- * a cache fill
- */
-struct cache_req {
-	struct cache_deferred_req *(*defer)(struct cache_req *req);
-	int thread_wait;  /* How long (jiffies) we can block the
-			   * current thread to wait for updates.
-			   */
-};
-/* this must be embedded in a deferred_request that is being
- * delayed awaiting cache-fill
- */
-struct cache_deferred_req {
-	struct hlist_node	hash;	/* on hash chain */
-	struct list_head	recent; /* on fifo */
-	struct cache_head	*item;  /* cache item we wait on */
-	void			*owner; /* we might need to discard all defered requests
-					 * owned by someone */
-	void			(*revisit)(struct cache_deferred_req *req,
-					   int too_many);
-};
-
-
-extern const struct file_operations cache_file_operations_pipefs;
-extern const struct file_operations content_file_operations_pipefs;
-extern const struct file_operations cache_flush_operations_pipefs;
-
-extern struct cache_head *
-sunrpc_cache_lookup(struct cache_detail *detail,
-		    struct cache_head *key, int hash);
-extern struct cache_head *
-sunrpc_cache_update(struct cache_detail *detail,
-		    struct cache_head *new, struct cache_head *old, int hash);
-
-extern int
-sunrpc_cache_pipe_upcall(struct cache_detail *detail, struct cache_head *h,
-		void (*cache_request)(struct cache_detail *,
-				      struct cache_head *,
-				      char **,
-				      int *));
-
-
-extern void cache_clean_deferred(void *owner);
-
-static inline struct cache_head  *cache_get(struct cache_head *h)
-{
-	kref_get(&h->ref);
-	return h;
-}
-
-
-static inline void cache_put(struct cache_head *h, struct cache_detail *cd)
-{
-	if (atomic_read(&h->ref.refcount) <= 2 &&
-	    h->expiry_time < cd->nextcheck)
-		cd->nextcheck = h->expiry_time;
-	kref_put(&h->ref, cd->cache_put);
-}
-
-static inline int cache_valid(struct cache_head *h)
-{
-	/* If an item has been unhashed pending removal when
-	 * the refcount drops to 0, the expiry_time will be
-	 * set to 0.  We don't want to consider such items
-	 * valid in this context even though CACHE_VALID is
-	 * set.
-	 */
-	return (h->expiry_time != 0 && test_bit(CACHE_VALID, &h->flags));
-}
-
-extern int cache_check(struct cache_detail *detail,
-		       struct cache_head *h, struct cache_req *rqstp);
-extern void cache_flush(void);
-extern void cache_purge(struct cache_detail *detail);
-#define NEVER (0x7FFFFFFF)
-extern void __init cache_initialize(void);
-extern int cache_register_net(struct cache_detail *cd, struct net *net);
-extern void cache_unregister_net(struct cache_detail *cd, struct net *net);
-
-extern struct cache_detail *cache_create_net(struct cache_detail *tmpl, struct net *net);
-extern void cache_destroy_net(struct cache_detail *cd, struct net *net);
-
-extern void sunrpc_init_cache_detail(struct cache_detail *cd);
-extern void sunrpc_destroy_cache_detail(struct cache_detail *cd);
-extern int sunrpc_cache_register_pipefs(struct dentry *parent, const char *,
-					umode_t, struct cache_detail *);
-extern void sunrpc_cache_unregister_pipefs(struct cache_detail *);
-
-extern void qword_add(char **bpp, int *lp, char *str);
-extern void qword_addhex(char **bpp, int *lp, char *buf, int blen);
-extern int qword_get(char **bpp, char *dest, int bufsize);
-
-static inline int get_int(char **bpp, int *anint)
-{
-	char buf[50];
-	char *ep;
-	int rv;
-	int len = qword_get(bpp, buf, 50);
-	if (len < 0) return -EINVAL;
-	if (len ==0) return -ENOENT;
-	rv = simple_strtol(buf, &ep, 0);
-	if (*ep) return -EINVAL;
-	*anint = rv;
-	return 0;
-}
-
-/*
- * timestamps kept in the cache are expressed in seconds
- * since boot.  This is the best for measuring differences in
- * real time.
- */
-static inline time_t seconds_since_boot(void)
-{
-	struct timespec boot;
-	getboottime(&boot);
-	return get_seconds() - boot.tv_sec;
-}
-
-static inline time_t convert_to_wallclock(time_t sinceboot)
-{
-	struct timespec boot;
-	getboottime(&boot);
-	return boot.tv_sec + sinceboot;
-}
-
-static inline time_t get_expiry(char **bpp)
-{
-	int rv;
-	struct timespec boot;
-
-	if (get_int(bpp, &rv))
-		return 0;
-	if (rv < 0)
-		return 0;
-	getboottime(&boot);
-	return rv - boot.tv_sec;
-}
-
-#endif /*  _LINUX_SUNRPC_CACHE_H_ */
diff --git a/ANDROID_3.4.5/include/linux/sunrpc/clnt.h b/ANDROID_3.4.5/include/linux/sunrpc/clnt.h
deleted file mode 100644
index 523547ec..00000000
--- a/ANDROID_3.4.5/include/linux/sunrpc/clnt.h
+++ /dev/null
@@ -1,319 +0,0 @@
-/*
- *  linux/include/linux/sunrpc/clnt.h
- *
- *  Declarations for the high-level RPC client interface
- *
- *  Copyright (C) 1995, 1996, Olaf Kirch <okir@monad.swb.de>
- */
-
-#ifndef _LINUX_SUNRPC_CLNT_H
-#define _LINUX_SUNRPC_CLNT_H
-
-#include <linux/types.h>
-#include <linux/socket.h>
-#include <linux/in.h>
-#include <linux/in6.h>
-
-#include <linux/sunrpc/msg_prot.h>
-#include <linux/sunrpc/sched.h>
-#include <linux/sunrpc/xprt.h>
-#include <linux/sunrpc/auth.h>
-#include <linux/sunrpc/stats.h>
-#include <linux/sunrpc/xdr.h>
-#include <linux/sunrpc/timer.h>
-#include <asm/signal.h>
-#include <linux/path.h>
-#include <net/ipv6.h>
-
-struct rpc_inode;
-
-/*
- * The high-level client handle
- */
-struct rpc_clnt {
-	atomic_t		cl_count;	/* Number of references */
-	struct list_head	cl_clients;	/* Global list of clients */
-	struct list_head	cl_tasks;	/* List of tasks */
-	spinlock_t		cl_lock;	/* spinlock */
-	struct rpc_xprt __rcu *	cl_xprt;	/* transport */
-	struct rpc_procinfo *	cl_procinfo;	/* procedure info */
-	u32			cl_prog,	/* RPC program number */
-				cl_vers,	/* RPC version number */
-				cl_maxproc;	/* max procedure number */
-
-	const char *		cl_protname;	/* protocol name */
-	struct rpc_auth *	cl_auth;	/* authenticator */
-	struct rpc_stat *	cl_stats;	/* per-program statistics */
-	struct rpc_iostats *	cl_metrics;	/* per-client statistics */
-
-	unsigned int		cl_softrtry : 1,/* soft timeouts */
-				cl_discrtry : 1,/* disconnect before retry */
-				cl_autobind : 1,/* use getport() */
-				cl_chatty   : 1;/* be verbose */
-
-	struct rpc_rtt *	cl_rtt;		/* RTO estimator data */
-	const struct rpc_timeout *cl_timeout;	/* Timeout strategy */
-
-	int			cl_nodelen;	/* nodename length */
-	char 			cl_nodename[UNX_MAXNODENAME];
-	struct dentry *		cl_dentry;
-	struct rpc_clnt *	cl_parent;	/* Points to parent of clones */
-	struct rpc_rtt		cl_rtt_default;
-	struct rpc_timeout	cl_timeout_default;
-	const struct rpc_program *cl_program;
-	char			*cl_principal;	/* target to authenticate to */
-};
-
-/*
- * General RPC program info
- */
-#define RPC_MAXVERSION		4
-struct rpc_program {
-	const char *		name;		/* protocol name */
-	u32			number;		/* program number */
-	unsigned int		nrvers;		/* number of versions */
-	const struct rpc_version **	version;	/* version array */
-	struct rpc_stat *	stats;		/* statistics */
-	const char *		pipe_dir_name;	/* path to rpc_pipefs dir */
-};
-
-struct rpc_version {
-	u32			number;		/* version number */
-	unsigned int		nrprocs;	/* number of procs */
-	struct rpc_procinfo *	procs;		/* procedure array */
-};
-
-/*
- * Procedure information
- */
-struct rpc_procinfo {
-	u32			p_proc;		/* RPC procedure number */
-	kxdreproc_t		p_encode;	/* XDR encode function */
-	kxdrdproc_t		p_decode;	/* XDR decode function */
-	unsigned int		p_arglen;	/* argument hdr length (u32) */
-	unsigned int		p_replen;	/* reply hdr length (u32) */
-	unsigned int		p_count;	/* call count */
-	unsigned int		p_timer;	/* Which RTT timer to use */
-	u32			p_statidx;	/* Which procedure to account */
-	const char *		p_name;		/* name of procedure */
-};
-
-#ifdef __KERNEL__
-
-struct rpc_create_args {
-	struct net		*net;
-	int			protocol;
-	struct sockaddr		*address;
-	size_t			addrsize;
-	struct sockaddr		*saddress;
-	const struct rpc_timeout *timeout;
-	const char		*servername;
-	const struct rpc_program *program;
-	u32			prognumber;	/* overrides program->number */
-	u32			version;
-	rpc_authflavor_t	authflavor;
-	unsigned long		flags;
-	char			*client_name;
-	struct svc_xprt		*bc_xprt;	/* NFSv4.1 backchannel */
-};
-
-/* Values for "flags" field */
-#define RPC_CLNT_CREATE_HARDRTRY	(1UL << 0)
-#define RPC_CLNT_CREATE_AUTOBIND	(1UL << 2)
-#define RPC_CLNT_CREATE_NONPRIVPORT	(1UL << 3)
-#define RPC_CLNT_CREATE_NOPING		(1UL << 4)
-#define RPC_CLNT_CREATE_DISCRTRY	(1UL << 5)
-#define RPC_CLNT_CREATE_QUIET		(1UL << 6)
-
-struct rpc_clnt *rpc_create(struct rpc_create_args *args);
-struct rpc_clnt	*rpc_bind_new_program(struct rpc_clnt *,
-				const struct rpc_program *, u32);
-void rpc_task_reset_client(struct rpc_task *task, struct rpc_clnt *clnt);
-struct rpc_clnt *rpc_clone_client(struct rpc_clnt *);
-void		rpc_shutdown_client(struct rpc_clnt *);
-void		rpc_release_client(struct rpc_clnt *);
-void		rpc_task_release_client(struct rpc_task *);
-
-int		rpcb_create_local(struct net *);
-void		rpcb_put_local(struct net *);
-int		rpcb_register(struct net *, u32, u32, int, unsigned short);
-int		rpcb_v4_register(struct net *net, const u32 program,
-				 const u32 version,
-				 const struct sockaddr *address,
-				 const char *netid);
-void		rpcb_getport_async(struct rpc_task *);
-
-void		rpc_call_start(struct rpc_task *);
-int		rpc_call_async(struct rpc_clnt *clnt,
-			       const struct rpc_message *msg, int flags,
-			       const struct rpc_call_ops *tk_ops,
-			       void *calldata);
-int		rpc_call_sync(struct rpc_clnt *clnt,
-			      const struct rpc_message *msg, int flags);
-struct rpc_task *rpc_call_null(struct rpc_clnt *clnt, struct rpc_cred *cred,
-			       int flags);
-int		rpc_restart_call_prepare(struct rpc_task *);
-int		rpc_restart_call(struct rpc_task *);
-void		rpc_setbufsize(struct rpc_clnt *, unsigned int, unsigned int);
-int		rpc_protocol(struct rpc_clnt *);
-struct net *	rpc_net_ns(struct rpc_clnt *);
-size_t		rpc_max_payload(struct rpc_clnt *);
-void		rpc_force_rebind(struct rpc_clnt *);
-size_t		rpc_peeraddr(struct rpc_clnt *, struct sockaddr *, size_t);
-const char	*rpc_peeraddr2str(struct rpc_clnt *, enum rpc_display_format_t);
-int		rpc_localaddr(struct rpc_clnt *, struct sockaddr *, size_t);
-
-size_t		rpc_ntop(const struct sockaddr *, char *, const size_t);
-size_t		rpc_pton(struct net *, const char *, const size_t,
-			 struct sockaddr *, const size_t);
-char *		rpc_sockaddr2uaddr(const struct sockaddr *, gfp_t);
-size_t		rpc_uaddr2sockaddr(struct net *, const char *, const size_t,
-				   struct sockaddr *, const size_t);
-
-static inline unsigned short rpc_get_port(const struct sockaddr *sap)
-{
-	switch (sap->sa_family) {
-	case AF_INET:
-		return ntohs(((struct sockaddr_in *)sap)->sin_port);
-	case AF_INET6:
-		return ntohs(((struct sockaddr_in6 *)sap)->sin6_port);
-	}
-	return 0;
-}
-
-static inline void rpc_set_port(struct sockaddr *sap,
-				const unsigned short port)
-{
-	switch (sap->sa_family) {
-	case AF_INET:
-		((struct sockaddr_in *)sap)->sin_port = htons(port);
-		break;
-	case AF_INET6:
-		((struct sockaddr_in6 *)sap)->sin6_port = htons(port);
-		break;
-	}
-}
-
-#define IPV6_SCOPE_DELIMITER		'%'
-#define IPV6_SCOPE_ID_LEN		sizeof("%nnnnnnnnnn")
-
-static inline bool __rpc_cmp_addr4(const struct sockaddr *sap1,
-				   const struct sockaddr *sap2)
-{
-	const struct sockaddr_in *sin1 = (const struct sockaddr_in *)sap1;
-	const struct sockaddr_in *sin2 = (const struct sockaddr_in *)sap2;
-
-	return sin1->sin_addr.s_addr == sin2->sin_addr.s_addr;
-}
-
-static inline bool __rpc_copy_addr4(struct sockaddr *dst,
-				    const struct sockaddr *src)
-{
-	const struct sockaddr_in *ssin = (struct sockaddr_in *) src;
-	struct sockaddr_in *dsin = (struct sockaddr_in *) dst;
-
-	dsin->sin_family = ssin->sin_family;
-	dsin->sin_addr.s_addr = ssin->sin_addr.s_addr;
-	return true;
-}
-
-#if IS_ENABLED(CONFIG_IPV6)
-static inline bool __rpc_cmp_addr6(const struct sockaddr *sap1,
-				   const struct sockaddr *sap2)
-{
-	const struct sockaddr_in6 *sin1 = (const struct sockaddr_in6 *)sap1;
-	const struct sockaddr_in6 *sin2 = (const struct sockaddr_in6 *)sap2;
-
-	if (!ipv6_addr_equal(&sin1->sin6_addr, &sin2->sin6_addr))
-		return false;
-	else if (ipv6_addr_type(&sin1->sin6_addr) & IPV6_ADDR_LINKLOCAL)
-		return sin1->sin6_scope_id == sin2->sin6_scope_id;
-
-	return true;
-}
-
-static inline bool __rpc_copy_addr6(struct sockaddr *dst,
-				    const struct sockaddr *src)
-{
-	const struct sockaddr_in6 *ssin6 = (const struct sockaddr_in6 *) src;
-	struct sockaddr_in6 *dsin6 = (struct sockaddr_in6 *) dst;
-
-	dsin6->sin6_family = ssin6->sin6_family;
-	dsin6->sin6_addr = ssin6->sin6_addr;
-	return true;
-}
-#else	/* !(IS_ENABLED(CONFIG_IPV6) */
-static inline bool __rpc_cmp_addr6(const struct sockaddr *sap1,
-				   const struct sockaddr *sap2)
-{
-	return false;
-}
-
-static inline bool __rpc_copy_addr6(struct sockaddr *dst,
-				    const struct sockaddr *src)
-{
-	return false;
-}
-#endif	/* !(IS_ENABLED(CONFIG_IPV6) */
-
-/**
- * rpc_cmp_addr - compare the address portion of two sockaddrs.
- * @sap1: first sockaddr
- * @sap2: second sockaddr
- *
- * Just compares the family and address portion. Ignores port, scope, etc.
- * Returns true if the addrs are equal, false if they aren't.
- */
-static inline bool rpc_cmp_addr(const struct sockaddr *sap1,
-				const struct sockaddr *sap2)
-{
-	if (sap1->sa_family == sap2->sa_family) {
-		switch (sap1->sa_family) {
-		case AF_INET:
-			return __rpc_cmp_addr4(sap1, sap2);
-		case AF_INET6:
-			return __rpc_cmp_addr6(sap1, sap2);
-		}
-	}
-	return false;
-}
-
-/**
- * rpc_copy_addr - copy the address portion of one sockaddr to another
- * @dst: destination sockaddr
- * @src: source sockaddr
- *
- * Just copies the address portion and family. Ignores port, scope, etc.
- * Caller is responsible for making certain that dst is large enough to hold
- * the address in src. Returns true if address family is supported. Returns
- * false otherwise.
- */
-static inline bool rpc_copy_addr(struct sockaddr *dst,
-				 const struct sockaddr *src)
-{
-	switch (src->sa_family) {
-	case AF_INET:
-		return __rpc_copy_addr4(dst, src);
-	case AF_INET6:
-		return __rpc_copy_addr6(dst, src);
-	}
-	return false;
-}
-
-/**
- * rpc_get_scope_id - return scopeid for a given sockaddr
- * @sa: sockaddr to get scopeid from
- *
- * Returns the value of the sin6_scope_id for AF_INET6 addrs, or 0 if
- * not an AF_INET6 address.
- */
-static inline u32 rpc_get_scope_id(const struct sockaddr *sa)
-{
-	if (sa->sa_family != AF_INET6)
-		return 0;
-
-	return ((struct sockaddr_in6 *) sa)->sin6_scope_id;
-}
-
-#endif /* __KERNEL__ */
-#endif /* _LINUX_SUNRPC_CLNT_H */
diff --git a/ANDROID_3.4.5/include/linux/sunrpc/debug.h b/ANDROID_3.4.5/include/linux/sunrpc/debug.h
deleted file mode 100644
index a76cc20d..00000000
--- a/ANDROID_3.4.5/include/linux/sunrpc/debug.h
+++ /dev/null
@@ -1,110 +0,0 @@
-/*
- * linux/include/linux/sunrpc/debug.h
- *
- * Debugging support for sunrpc module
- *
- * Copyright (C) 1996, Olaf Kirch <okir@monad.swb.de>
- */
-
-#ifndef _LINUX_SUNRPC_DEBUG_H_
-#define _LINUX_SUNRPC_DEBUG_H_
-
-/*
- * RPC debug facilities
- */
-#define RPCDBG_XPRT		0x0001
-#define RPCDBG_CALL		0x0002
-#define RPCDBG_DEBUG		0x0004
-#define RPCDBG_NFS		0x0008
-#define RPCDBG_AUTH		0x0010
-#define RPCDBG_BIND		0x0020
-#define RPCDBG_SCHED		0x0040
-#define RPCDBG_TRANS		0x0080
-#define RPCDBG_SVCXPRT		0x0100
-#define RPCDBG_SVCDSP		0x0200
-#define RPCDBG_MISC		0x0400
-#define RPCDBG_CACHE		0x0800
-#define RPCDBG_ALL		0x7fff
-
-#ifdef __KERNEL__
-
-/*
- * Enable RPC debugging/profiling.
- */
-#ifdef CONFIG_SUNRPC_DEBUG
-#define  RPC_DEBUG
-#endif
-#ifdef CONFIG_TRACEPOINTS
-#define RPC_TRACEPOINTS
-#endif
-/* #define  RPC_PROFILE */
-
-/*
- * Debugging macros etc
- */
-#ifdef RPC_DEBUG
-extern unsigned int		rpc_debug;
-extern unsigned int		nfs_debug;
-extern unsigned int		nfsd_debug;
-extern unsigned int		nlm_debug;
-#endif
-
-#define dprintk(args...)	dfprintk(FACILITY, ## args)
-#define dprintk_rcu(args...)	dfprintk_rcu(FACILITY, ## args)
-
-#undef ifdebug
-#ifdef RPC_DEBUG			
-# define ifdebug(fac)		if (unlikely(rpc_debug & RPCDBG_##fac))
-
-# define dfprintk(fac, args...)	\
-	do { \
-		ifdebug(fac) \
-			printk(KERN_DEFAULT args); \
-	} while (0)
-
-# define dfprintk_rcu(fac, args...)	\
-	do { \
-		ifdebug(fac) { \
-			rcu_read_lock(); \
-			printk(KERN_DEFAULT args); \
-			rcu_read_unlock(); \
-		} \
-	} while (0)
-
-# define RPC_IFDEBUG(x)		x
-#else
-# define ifdebug(fac)		if (0)
-# define dfprintk(fac, args...)	do {} while (0)
-# define dfprintk_rcu(fac, args...)	do {} while (0)
-# define RPC_IFDEBUG(x)
-#endif
-
-/*
- * Sysctl interface for RPC debugging
- */
-#ifdef RPC_DEBUG
-void		rpc_register_sysctl(void);
-void		rpc_unregister_sysctl(void);
-#endif
-
-#endif /* __KERNEL__ */
-
-/*
- * Declarations for the sysctl debug interface, which allows to read or
- * change the debug flags for rpc, nfs, nfsd, and lockd. Since the sunrpc
- * module currently registers its sysctl table dynamically, the sysctl path
- * for module FOO is <CTL_SUNRPC, CTL_FOODEBUG>.
- */
-
-enum {
-	CTL_RPCDEBUG = 1,
-	CTL_NFSDEBUG,
-	CTL_NFSDDEBUG,
-	CTL_NLMDEBUG,
-	CTL_SLOTTABLE_UDP,
-	CTL_SLOTTABLE_TCP,
-	CTL_MIN_RESVPORT,
-	CTL_MAX_RESVPORT,
-};
-
-#endif /* _LINUX_SUNRPC_DEBUG_H_ */
diff --git a/ANDROID_3.4.5/include/linux/sunrpc/gss_api.h b/ANDROID_3.4.5/include/linux/sunrpc/gss_api.h
deleted file mode 100644
index 332da61c..00000000
--- a/ANDROID_3.4.5/include/linux/sunrpc/gss_api.h
+++ /dev/null
@@ -1,141 +0,0 @@
-/*
- * linux/include/linux/sunrpc/gss_api.h
- *
- * Somewhat simplified version of the gss api.
- *
- * Dug Song <dugsong@monkey.org>
- * Andy Adamson <andros@umich.edu>
- * Bruce Fields <bfields@umich.edu>
- * Copyright (c) 2000 The Regents of the University of Michigan
- */
-
-#ifndef _LINUX_SUNRPC_GSS_API_H
-#define _LINUX_SUNRPC_GSS_API_H
-
-#ifdef __KERNEL__
-#include <linux/sunrpc/xdr.h>
-#include <linux/uio.h>
-
-/* The mechanism-independent gss-api context: */
-struct gss_ctx {
-	struct gss_api_mech	*mech_type;
-	void			*internal_ctx_id;
-};
-
-#define GSS_C_NO_BUFFER		((struct xdr_netobj) 0)
-#define GSS_C_NO_CONTEXT	((struct gss_ctx *) 0)
-#define GSS_C_NULL_OID		((struct xdr_netobj) 0)
-
-/*XXX  arbitrary length - is this set somewhere? */
-#define GSS_OID_MAX_LEN 32
-
-/* gss-api prototypes; note that these are somewhat simplified versions of
- * the prototypes specified in RFC 2744. */
-int gss_import_sec_context(
-		const void*		input_token,
-		size_t			bufsize,
-		struct gss_api_mech	*mech,
-		struct gss_ctx		**ctx_id,
-		gfp_t			gfp_mask);
-u32 gss_get_mic(
-		struct gss_ctx		*ctx_id,
-		struct xdr_buf		*message,
-		struct xdr_netobj	*mic_token);
-u32 gss_verify_mic(
-		struct gss_ctx		*ctx_id,
-		struct xdr_buf		*message,
-		struct xdr_netobj	*mic_token);
-u32 gss_wrap(
-		struct gss_ctx		*ctx_id,
-		int			offset,
-		struct xdr_buf		*outbuf,
-		struct page		**inpages);
-u32 gss_unwrap(
-		struct gss_ctx		*ctx_id,
-		int			offset,
-		struct xdr_buf		*inbuf);
-u32 gss_delete_sec_context(
-		struct gss_ctx		**ctx_id);
-
-u32 gss_svc_to_pseudoflavor(struct gss_api_mech *, u32 service);
-u32 gss_pseudoflavor_to_service(struct gss_api_mech *, u32 pseudoflavor);
-char *gss_service_to_auth_domain_name(struct gss_api_mech *, u32 service);
-
-struct pf_desc {
-	u32	pseudoflavor;
-	u32	service;
-	char	*name;
-	char	*auth_domain_name;
-};
-
-/* Different mechanisms (e.g., krb5 or spkm3) may implement gss-api, and
- * mechanisms may be dynamically registered or unregistered by modules. */
-
-/* Each mechanism is described by the following struct: */
-struct gss_api_mech {
-	struct list_head	gm_list;
-	struct module		*gm_owner;
-	struct xdr_netobj	gm_oid;
-	char			*gm_name;
-	const struct gss_api_ops *gm_ops;
-	/* pseudoflavors supported by this mechanism: */
-	int			gm_pf_num;
-	struct pf_desc *	gm_pfs;
-	/* Should the following be a callback operation instead? */
-	const char		*gm_upcall_enctypes;
-};
-
-/* and must provide the following operations: */
-struct gss_api_ops {
-	int (*gss_import_sec_context)(
-			const void		*input_token,
-			size_t			bufsize,
-			struct gss_ctx		*ctx_id,
-			gfp_t			gfp_mask);
-	u32 (*gss_get_mic)(
-			struct gss_ctx		*ctx_id,
-			struct xdr_buf		*message,
-			struct xdr_netobj	*mic_token);
-	u32 (*gss_verify_mic)(
-			struct gss_ctx		*ctx_id,
-			struct xdr_buf		*message,
-			struct xdr_netobj	*mic_token);
-	u32 (*gss_wrap)(
-			struct gss_ctx		*ctx_id,
-			int			offset,
-			struct xdr_buf		*outbuf,
-			struct page		**inpages);
-	u32 (*gss_unwrap)(
-			struct gss_ctx		*ctx_id,
-			int			offset,
-			struct xdr_buf		*buf);
-	void (*gss_delete_sec_context)(
-			void			*internal_ctx_id);
-};
-
-int gss_mech_register(struct gss_api_mech *);
-void gss_mech_unregister(struct gss_api_mech *);
-
-/* returns a mechanism descriptor given an OID, and increments the mechanism's
- * reference count. */
-struct gss_api_mech * gss_mech_get_by_OID(struct xdr_netobj *);
-
-/* Returns a reference to a mechanism, given a name like "krb5" etc. */
-struct gss_api_mech *gss_mech_get_by_name(const char *);
-
-/* Similar, but get by pseudoflavor. */
-struct gss_api_mech *gss_mech_get_by_pseudoflavor(u32);
-
-/* Fill in an array with a list of supported pseudoflavors */
-int gss_mech_list_pseudoflavors(u32 *);
-
-/* Just increments the mechanism's reference count and returns its input: */
-struct gss_api_mech * gss_mech_get(struct gss_api_mech *);
-
-/* For every successful gss_mech_get or gss_mech_get_by_* call there must be a
- * corresponding call to gss_mech_put. */
-void gss_mech_put(struct gss_api_mech *);
-
-#endif /* __KERNEL__ */
-#endif /* _LINUX_SUNRPC_GSS_API_H */
-
diff --git a/ANDROID_3.4.5/include/linux/sunrpc/gss_asn1.h b/ANDROID_3.4.5/include/linux/sunrpc/gss_asn1.h
deleted file mode 100644
index 3ccecd0a..00000000
--- a/ANDROID_3.4.5/include/linux/sunrpc/gss_asn1.h
+++ /dev/null
@@ -1,81 +0,0 @@
-/*
- *  linux/include/linux/sunrpc/gss_asn1.h
- *
- *  minimal asn1 for generic encoding/decoding of gss tokens
- *
- *  Adapted from MIT Kerberos 5-1.2.1 lib/include/krb5.h,
- *  lib/gssapi/krb5/gssapiP_krb5.h, and others
- *
- *  Copyright (c) 2000 The Regents of the University of Michigan.
- *  All rights reserved.
- *
- *  Andy Adamson   <andros@umich.edu>
- */
-
-/*
- * Copyright 1995 by the Massachusetts Institute of Technology.
- * All Rights Reserved.
- *
- * Export of this software from the United States of America may
- *   require a specific license from the United States Government.
- *   It is the responsibility of any person or organization contemplating
- *   export to obtain such a license before exporting.
- *
- * WITHIN THAT CONSTRAINT, permission to use, copy, modify, and
- * distribute this software and its documentation for any purpose and
- * without fee is hereby granted, provided that the above copyright
- * notice appear in all copies and that both that copyright notice and
- * this permission notice appear in supporting documentation, and that
- * the name of M.I.T. not be used in advertising or publicity pertaining
- * to distribution of the software without specific, written prior
- * permission.  Furthermore if you modify this software you must label
- * your software as modified software and not distribute it in such a
- * fashion that it might be confused with the original M.I.T. software.
- * M.I.T. makes no representations about the suitability of
- * this software for any purpose.  It is provided "as is" without express
- * or implied warranty.
- *
- */
-
-
-#include <linux/sunrpc/gss_api.h>
-
-#define SIZEOF_INT 4
-
-/* from gssapi_err_generic.h */
-#define G_BAD_SERVICE_NAME                       (-2045022976L)
-#define G_BAD_STRING_UID                         (-2045022975L)
-#define G_NOUSER                                 (-2045022974L)
-#define G_VALIDATE_FAILED                        (-2045022973L)
-#define G_BUFFER_ALLOC                           (-2045022972L)
-#define G_BAD_MSG_CTX                            (-2045022971L)
-#define G_WRONG_SIZE                             (-2045022970L)
-#define G_BAD_USAGE                              (-2045022969L)
-#define G_UNKNOWN_QOP                            (-2045022968L)
-#define G_NO_HOSTNAME                            (-2045022967L)
-#define G_BAD_HOSTNAME                           (-2045022966L)
-#define G_WRONG_MECH                             (-2045022965L)
-#define G_BAD_TOK_HEADER                         (-2045022964L)
-#define G_BAD_DIRECTION                          (-2045022963L)
-#define G_TOK_TRUNC                              (-2045022962L)
-#define G_REFLECT                                (-2045022961L)
-#define G_WRONG_TOKID                            (-2045022960L)
-
-#define g_OID_equal(o1,o2) \
-   (((o1)->len == (o2)->len) && \
-    (memcmp((o1)->data,(o2)->data,(int) (o1)->len) == 0))
-
-u32 g_verify_token_header(
-     struct xdr_netobj *mech,
-     int *body_size,
-     unsigned char **buf_in,
-     int toksize);
-
-int g_token_size(
-     struct xdr_netobj *mech,
-     unsigned int body_size);
-
-void g_make_token_header(
-     struct xdr_netobj *mech,
-     int body_size,
-     unsigned char **buf);
diff --git a/ANDROID_3.4.5/include/linux/sunrpc/gss_err.h b/ANDROID_3.4.5/include/linux/sunrpc/gss_err.h
deleted file mode 100644
index a6807867..00000000
--- a/ANDROID_3.4.5/include/linux/sunrpc/gss_err.h
+++ /dev/null
@@ -1,167 +0,0 @@
-/*
- *  linux/include/sunrpc/gss_err.h
- *
- *  Adapted from MIT Kerberos 5-1.2.1 include/gssapi/gssapi.h
- *
- *  Copyright (c) 2002 The Regents of the University of Michigan.
- *  All rights reserved.
- *
- *  Andy Adamson   <andros@umich.edu>
- */
-
-/*
- * Copyright 1993 by OpenVision Technologies, Inc.
- * 
- * Permission to use, copy, modify, distribute, and sell this software
- * and its documentation for any purpose is hereby granted without fee,
- * provided that the above copyright notice appears in all copies and
- * that both that copyright notice and this permission notice appear in
- * supporting documentation, and that the name of OpenVision not be used
- * in advertising or publicity pertaining to distribution of the software
- * without specific, written prior permission. OpenVision makes no
- * representations about the suitability of this software for any
- * purpose.  It is provided "as is" without express or implied warranty.
- * 
- * OPENVISION DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
- * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
- * EVENT SHALL OPENVISION BE LIABLE FOR ANY SPECIAL, INDIRECT OR
- * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF
- * USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR
- * OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
- * PERFORMANCE OF THIS SOFTWARE.
- */
-
-#ifndef _LINUX_SUNRPC_GSS_ERR_H
-#define _LINUX_SUNRPC_GSS_ERR_H
-
-#ifdef __KERNEL__
-
-typedef unsigned int OM_uint32;
-
-/*
- * Flag bits for context-level services.
- */
-#define GSS_C_DELEG_FLAG 1
-#define GSS_C_MUTUAL_FLAG 2
-#define GSS_C_REPLAY_FLAG 4
-#define GSS_C_SEQUENCE_FLAG 8
-#define GSS_C_CONF_FLAG 16
-#define GSS_C_INTEG_FLAG 32
-#define	GSS_C_ANON_FLAG 64
-#define GSS_C_PROT_READY_FLAG 128
-#define GSS_C_TRANS_FLAG 256
-
-/*
- * Credential usage options
- */
-#define GSS_C_BOTH 0
-#define GSS_C_INITIATE 1
-#define GSS_C_ACCEPT 2
-
-/*
- * Status code types for gss_display_status
- */
-#define GSS_C_GSS_CODE 1
-#define GSS_C_MECH_CODE 2
-
-
-/*
- * Expiration time of 2^32-1 seconds means infinite lifetime for a
- * credential or security context
- */
-#define GSS_C_INDEFINITE ((OM_uint32) 0xfffffffful)
-
-
-/* Major status codes */
-
-#define GSS_S_COMPLETE 0
-
-/*
- * Some "helper" definitions to make the status code macros obvious.
- */
-#define GSS_C_CALLING_ERROR_OFFSET 24
-#define GSS_C_ROUTINE_ERROR_OFFSET 16
-#define GSS_C_SUPPLEMENTARY_OFFSET 0
-#define GSS_C_CALLING_ERROR_MASK ((OM_uint32) 0377ul)
-#define GSS_C_ROUTINE_ERROR_MASK ((OM_uint32) 0377ul)
-#define GSS_C_SUPPLEMENTARY_MASK ((OM_uint32) 0177777ul)
-
-/*
- * The macros that test status codes for error conditions.  Note that the
- * GSS_ERROR() macro has changed slightly from the V1 GSSAPI so that it now
- * evaluates its argument only once.
- */
-#define GSS_CALLING_ERROR(x) \
-  ((x) & (GSS_C_CALLING_ERROR_MASK << GSS_C_CALLING_ERROR_OFFSET))
-#define GSS_ROUTINE_ERROR(x) \
-  ((x) & (GSS_C_ROUTINE_ERROR_MASK << GSS_C_ROUTINE_ERROR_OFFSET))
-#define GSS_SUPPLEMENTARY_INFO(x) \
-  ((x) & (GSS_C_SUPPLEMENTARY_MASK << GSS_C_SUPPLEMENTARY_OFFSET))
-#define GSS_ERROR(x) \
-  ((x) & ((GSS_C_CALLING_ERROR_MASK << GSS_C_CALLING_ERROR_OFFSET) | \
-	  (GSS_C_ROUTINE_ERROR_MASK << GSS_C_ROUTINE_ERROR_OFFSET)))
-
-/*
- * Now the actual status code definitions
- */
-
-/*
- * Calling errors:
- */
-#define GSS_S_CALL_INACCESSIBLE_READ \
-                             (((OM_uint32) 1ul) << GSS_C_CALLING_ERROR_OFFSET)
-#define GSS_S_CALL_INACCESSIBLE_WRITE \
-                             (((OM_uint32) 2ul) << GSS_C_CALLING_ERROR_OFFSET)
-#define GSS_S_CALL_BAD_STRUCTURE \
-                             (((OM_uint32) 3ul) << GSS_C_CALLING_ERROR_OFFSET)
-
-/*
- * Routine errors:
- */
-#define GSS_S_BAD_MECH (((OM_uint32) 1ul) << GSS_C_ROUTINE_ERROR_OFFSET)
-#define GSS_S_BAD_NAME (((OM_uint32) 2ul) << GSS_C_ROUTINE_ERROR_OFFSET)
-#define GSS_S_BAD_NAMETYPE (((OM_uint32) 3ul) << GSS_C_ROUTINE_ERROR_OFFSET)
-#define GSS_S_BAD_BINDINGS (((OM_uint32) 4ul) << GSS_C_ROUTINE_ERROR_OFFSET)
-#define GSS_S_BAD_STATUS (((OM_uint32) 5ul) << GSS_C_ROUTINE_ERROR_OFFSET)
-#define GSS_S_BAD_SIG (((OM_uint32) 6ul) << GSS_C_ROUTINE_ERROR_OFFSET)
-#define GSS_S_NO_CRED (((OM_uint32) 7ul) << GSS_C_ROUTINE_ERROR_OFFSET)
-#define GSS_S_NO_CONTEXT (((OM_uint32) 8ul) << GSS_C_ROUTINE_ERROR_OFFSET)
-#define GSS_S_DEFECTIVE_TOKEN (((OM_uint32) 9ul) << GSS_C_ROUTINE_ERROR_OFFSET)
-#define GSS_S_DEFECTIVE_CREDENTIAL \
-     (((OM_uint32) 10ul) << GSS_C_ROUTINE_ERROR_OFFSET)
-#define GSS_S_CREDENTIALS_EXPIRED \
-     (((OM_uint32) 11ul) << GSS_C_ROUTINE_ERROR_OFFSET)
-#define GSS_S_CONTEXT_EXPIRED \
-     (((OM_uint32) 12ul) << GSS_C_ROUTINE_ERROR_OFFSET)
-#define GSS_S_FAILURE (((OM_uint32) 13ul) << GSS_C_ROUTINE_ERROR_OFFSET)
-#define GSS_S_BAD_QOP (((OM_uint32) 14ul) << GSS_C_ROUTINE_ERROR_OFFSET)
-#define GSS_S_UNAUTHORIZED (((OM_uint32) 15ul) << GSS_C_ROUTINE_ERROR_OFFSET)
-#define GSS_S_UNAVAILABLE (((OM_uint32) 16ul) << GSS_C_ROUTINE_ERROR_OFFSET)
-#define GSS_S_DUPLICATE_ELEMENT \
-     (((OM_uint32) 17ul) << GSS_C_ROUTINE_ERROR_OFFSET)
-#define GSS_S_NAME_NOT_MN \
-     (((OM_uint32) 18ul) << GSS_C_ROUTINE_ERROR_OFFSET)
-
-/*
- * Supplementary info bits:
- */
-#define GSS_S_CONTINUE_NEEDED (1 << (GSS_C_SUPPLEMENTARY_OFFSET + 0))
-#define GSS_S_DUPLICATE_TOKEN (1 << (GSS_C_SUPPLEMENTARY_OFFSET + 1))
-#define GSS_S_OLD_TOKEN (1 << (GSS_C_SUPPLEMENTARY_OFFSET + 2))
-#define GSS_S_UNSEQ_TOKEN (1 << (GSS_C_SUPPLEMENTARY_OFFSET + 3))
-#define GSS_S_GAP_TOKEN (1 << (GSS_C_SUPPLEMENTARY_OFFSET + 4))
-
-/* XXXX these are not part of the GSSAPI C bindings!  (but should be) */
-
-#define GSS_CALLING_ERROR_FIELD(x) \
-   (((x) >> GSS_C_CALLING_ERROR_OFFSET) & GSS_C_CALLING_ERROR_MASK)
-#define GSS_ROUTINE_ERROR_FIELD(x) \
-   (((x) >> GSS_C_ROUTINE_ERROR_OFFSET) & GSS_C_ROUTINE_ERROR_MASK)
-#define GSS_SUPPLEMENTARY_INFO_FIELD(x) \
-   (((x) >> GSS_C_SUPPLEMENTARY_OFFSET) & GSS_C_SUPPLEMENTARY_MASK)
-
-/* XXXX This is a necessary evil until the spec is fixed */
-#define GSS_S_CRED_UNAVAIL GSS_S_FAILURE
-
-#endif /* __KERNEL__ */
-#endif /* __LINUX_SUNRPC_GSS_ERR_H */
diff --git a/ANDROID_3.4.5/include/linux/sunrpc/gss_krb5.h b/ANDROID_3.4.5/include/linux/sunrpc/gss_krb5.h
deleted file mode 100644
index 5af2931c..00000000
--- a/ANDROID_3.4.5/include/linux/sunrpc/gss_krb5.h
+++ /dev/null
@@ -1,331 +0,0 @@
-/*
- *  linux/include/linux/sunrpc/gss_krb5_types.h
- *
- *  Adapted from MIT Kerberos 5-1.2.1 lib/include/krb5.h,
- *  lib/gssapi/krb5/gssapiP_krb5.h, and others
- *
- *  Copyright (c) 2000-2008 The Regents of the University of Michigan.
- *  All rights reserved.
- *
- *  Andy Adamson   <andros@umich.edu>
- *  Bruce Fields   <bfields@umich.edu>
- */
-
-/*
- * Copyright 1995 by the Massachusetts Institute of Technology.
- * All Rights Reserved.
- *
- * Export of this software from the United States of America may
- *   require a specific license from the United States Government.
- *   It is the responsibility of any person or organization contemplating
- *   export to obtain such a license before exporting.
- *
- * WITHIN THAT CONSTRAINT, permission to use, copy, modify, and
- * distribute this software and its documentation for any purpose and
- * without fee is hereby granted, provided that the above copyright
- * notice appear in all copies and that both that copyright notice and
- * this permission notice appear in supporting documentation, and that
- * the name of M.I.T. not be used in advertising or publicity pertaining
- * to distribution of the software without specific, written prior
- * permission.  Furthermore if you modify this software you must label
- * your software as modified software and not distribute it in such a
- * fashion that it might be confused with the original M.I.T. software.
- * M.I.T. makes no representations about the suitability of
- * this software for any purpose.  It is provided "as is" without express
- * or implied warranty.
- *
- */
-
-#include <linux/crypto.h>
-#include <linux/sunrpc/auth_gss.h>
-#include <linux/sunrpc/gss_err.h>
-#include <linux/sunrpc/gss_asn1.h>
-
-/* Length of constant used in key derivation */
-#define GSS_KRB5_K5CLENGTH (5)
-
-/* Maximum key length (in bytes) for the supported crypto algorithms*/
-#define GSS_KRB5_MAX_KEYLEN (32)
-
-/* Maximum checksum function output for the supported crypto algorithms */
-#define GSS_KRB5_MAX_CKSUM_LEN  (20)
-
-/* Maximum blocksize for the supported crypto algorithms */
-#define GSS_KRB5_MAX_BLOCKSIZE  (16)
-
-struct krb5_ctx;
-
-struct gss_krb5_enctype {
-	const u32		etype;		/* encryption (key) type */
-	const u32		ctype;		/* checksum type */
-	const char		*name;		/* "friendly" name */
-	const char		*encrypt_name;	/* crypto encrypt name */
-	const char		*cksum_name;	/* crypto checksum name */
-	const u16		signalg;	/* signing algorithm */
-	const u16		sealalg;	/* sealing algorithm */
-	const u32		blocksize;	/* encryption blocksize */
-	const u32		conflen;	/* confounder length
-						   (normally the same as
-						   the blocksize) */
-	const u32		cksumlength;	/* checksum length */
-	const u32		keyed_cksum;	/* is it a keyed cksum? */
-	const u32		keybytes;	/* raw key len, in bytes */
-	const u32		keylength;	/* final key len, in bytes */
-	u32 (*encrypt) (struct crypto_blkcipher *tfm,
-			void *iv, void *in, void *out,
-			int length);		/* encryption function */
-	u32 (*decrypt) (struct crypto_blkcipher *tfm,
-			void *iv, void *in, void *out,
-			int length);		/* decryption function */
-	u32 (*mk_key) (const struct gss_krb5_enctype *gk5e,
-		       struct xdr_netobj *in,
-		       struct xdr_netobj *out);	/* complete key generation */
-	u32 (*encrypt_v2) (struct krb5_ctx *kctx, u32 offset,
-			   struct xdr_buf *buf, int ec,
-			   struct page **pages); /* v2 encryption function */
-	u32 (*decrypt_v2) (struct krb5_ctx *kctx, u32 offset,
-			   struct xdr_buf *buf, u32 *headskip,
-			   u32 *tailskip);	/* v2 decryption function */
-};
-
-/* krb5_ctx flags definitions */
-#define KRB5_CTX_FLAG_INITIATOR         0x00000001
-#define KRB5_CTX_FLAG_CFX               0x00000002
-#define KRB5_CTX_FLAG_ACCEPTOR_SUBKEY   0x00000004
-
-struct krb5_ctx {
-	int			initiate; /* 1 = initiating, 0 = accepting */
-	u32			enctype;
-	u32			flags;
-	const struct gss_krb5_enctype *gk5e; /* enctype-specific info */
-	struct crypto_blkcipher	*enc;
-	struct crypto_blkcipher	*seq;
-	struct crypto_blkcipher *acceptor_enc;
-	struct crypto_blkcipher *initiator_enc;
-	struct crypto_blkcipher *acceptor_enc_aux;
-	struct crypto_blkcipher *initiator_enc_aux;
-	u8			Ksess[GSS_KRB5_MAX_KEYLEN]; /* session key */
-	u8			cksum[GSS_KRB5_MAX_KEYLEN];
-	s32			endtime;
-	u32			seq_send;
-	u64			seq_send64;
-	struct xdr_netobj	mech_used;
-	u8			initiator_sign[GSS_KRB5_MAX_KEYLEN];
-	u8			acceptor_sign[GSS_KRB5_MAX_KEYLEN];
-	u8			initiator_seal[GSS_KRB5_MAX_KEYLEN];
-	u8			acceptor_seal[GSS_KRB5_MAX_KEYLEN];
-	u8			initiator_integ[GSS_KRB5_MAX_KEYLEN];
-	u8			acceptor_integ[GSS_KRB5_MAX_KEYLEN];
-};
-
-extern spinlock_t krb5_seq_lock;
-
-/* The length of the Kerberos GSS token header */
-#define GSS_KRB5_TOK_HDR_LEN	(16)
-
-#define KG_TOK_MIC_MSG    0x0101
-#define KG_TOK_WRAP_MSG   0x0201
-
-#define KG2_TOK_INITIAL     0x0101
-#define KG2_TOK_RESPONSE    0x0202
-#define KG2_TOK_MIC         0x0404
-#define KG2_TOK_WRAP        0x0504
-
-#define KG2_TOKEN_FLAG_SENTBYACCEPTOR   0x01
-#define KG2_TOKEN_FLAG_SEALED           0x02
-#define KG2_TOKEN_FLAG_ACCEPTORSUBKEY   0x04
-
-#define KG2_RESP_FLAG_ERROR             0x0001
-#define KG2_RESP_FLAG_DELEG_OK          0x0002
-
-enum sgn_alg {
-	SGN_ALG_DES_MAC_MD5 = 0x0000,
-	SGN_ALG_MD2_5 = 0x0001,
-	SGN_ALG_DES_MAC = 0x0002,
-	SGN_ALG_3 = 0x0003,		/* not published */
-	SGN_ALG_HMAC_MD5 = 0x0011,	/* microsoft w2k; no support */
-	SGN_ALG_HMAC_SHA1_DES3_KD = 0x0004
-};
-enum seal_alg {
-	SEAL_ALG_NONE = 0xffff,
-	SEAL_ALG_DES = 0x0000,
-	SEAL_ALG_1 = 0x0001,		/* not published */
-	SEAL_ALG_MICROSOFT_RC4 = 0x0010,/* microsoft w2k; no support */
-	SEAL_ALG_DES3KD = 0x0002
-};
-
-#define CKSUMTYPE_CRC32			0x0001
-#define CKSUMTYPE_RSA_MD4		0x0002
-#define CKSUMTYPE_RSA_MD4_DES		0x0003
-#define CKSUMTYPE_DESCBC		0x0004
-#define CKSUMTYPE_RSA_MD5		0x0007
-#define CKSUMTYPE_RSA_MD5_DES		0x0008
-#define CKSUMTYPE_NIST_SHA		0x0009
-#define CKSUMTYPE_HMAC_SHA1_DES3	0x000c
-#define CKSUMTYPE_HMAC_SHA1_96_AES128   0x000f
-#define CKSUMTYPE_HMAC_SHA1_96_AES256   0x0010
-#define CKSUMTYPE_HMAC_MD5_ARCFOUR      -138 /* Microsoft md5 hmac cksumtype */
-
-/* from gssapi_err_krb5.h */
-#define KG_CCACHE_NOMATCH                        (39756032L)
-#define KG_KEYTAB_NOMATCH                        (39756033L)
-#define KG_TGT_MISSING                           (39756034L)
-#define KG_NO_SUBKEY                             (39756035L)
-#define KG_CONTEXT_ESTABLISHED                   (39756036L)
-#define KG_BAD_SIGN_TYPE                         (39756037L)
-#define KG_BAD_LENGTH                            (39756038L)
-#define KG_CTX_INCOMPLETE                        (39756039L)
-#define KG_CONTEXT                               (39756040L)
-#define KG_CRED                                  (39756041L)
-#define KG_ENC_DESC                              (39756042L)
-#define KG_BAD_SEQ                               (39756043L)
-#define KG_EMPTY_CCACHE                          (39756044L)
-#define KG_NO_CTYPES                             (39756045L)
-
-/* per Kerberos v5 protocol spec crypto types from the wire. 
- * these get mapped to linux kernel crypto routines.  
- */
-#define ENCTYPE_NULL            0x0000
-#define ENCTYPE_DES_CBC_CRC     0x0001	/* DES cbc mode with CRC-32 */
-#define ENCTYPE_DES_CBC_MD4     0x0002	/* DES cbc mode with RSA-MD4 */
-#define ENCTYPE_DES_CBC_MD5     0x0003	/* DES cbc mode with RSA-MD5 */
-#define ENCTYPE_DES_CBC_RAW     0x0004	/* DES cbc mode raw */
-/* XXX deprecated? */
-#define ENCTYPE_DES3_CBC_SHA    0x0005	/* DES-3 cbc mode with NIST-SHA */
-#define ENCTYPE_DES3_CBC_RAW    0x0006	/* DES-3 cbc mode raw */
-#define ENCTYPE_DES_HMAC_SHA1   0x0008
-#define ENCTYPE_DES3_CBC_SHA1   0x0010
-#define ENCTYPE_AES128_CTS_HMAC_SHA1_96 0x0011
-#define ENCTYPE_AES256_CTS_HMAC_SHA1_96 0x0012
-#define ENCTYPE_ARCFOUR_HMAC            0x0017
-#define ENCTYPE_ARCFOUR_HMAC_EXP        0x0018
-#define ENCTYPE_UNKNOWN         0x01ff
-
-/*
- * Constants used for key derivation
- */
-/* for 3DES */
-#define KG_USAGE_SEAL (22)
-#define KG_USAGE_SIGN (23)
-#define KG_USAGE_SEQ  (24)
-
-/* from rfc3961 */
-#define KEY_USAGE_SEED_CHECKSUM         (0x99)
-#define KEY_USAGE_SEED_ENCRYPTION       (0xAA)
-#define KEY_USAGE_SEED_INTEGRITY        (0x55)
-
-/* from rfc4121 */
-#define KG_USAGE_ACCEPTOR_SEAL  (22)
-#define KG_USAGE_ACCEPTOR_SIGN  (23)
-#define KG_USAGE_INITIATOR_SEAL (24)
-#define KG_USAGE_INITIATOR_SIGN (25)
-
-/*
- * This compile-time check verifies that we will not exceed the
- * slack space allotted by the client and server auth_gss code
- * before they call gss_wrap().
- */
-#define GSS_KRB5_MAX_SLACK_NEEDED \
-	(GSS_KRB5_TOK_HDR_LEN     /* gss token header */         \
-	+ GSS_KRB5_MAX_CKSUM_LEN  /* gss token checksum */       \
-	+ GSS_KRB5_MAX_BLOCKSIZE  /* confounder */               \
-	+ GSS_KRB5_MAX_BLOCKSIZE  /* possible padding */         \
-	+ GSS_KRB5_TOK_HDR_LEN    /* encrypted hdr in v2 token */\
-	+ GSS_KRB5_MAX_CKSUM_LEN  /* encryption hmac */          \
-	+ 4 + 4                   /* RPC verifier */             \
-	+ GSS_KRB5_TOK_HDR_LEN                                   \
-	+ GSS_KRB5_MAX_CKSUM_LEN)
-
-u32
-make_checksum(struct krb5_ctx *kctx, char *header, int hdrlen,
-		struct xdr_buf *body, int body_offset, u8 *cksumkey,
-		unsigned int usage, struct xdr_netobj *cksumout);
-
-u32
-make_checksum_v2(struct krb5_ctx *, char *header, int hdrlen,
-		 struct xdr_buf *body, int body_offset, u8 *key,
-		 unsigned int usage, struct xdr_netobj *cksum);
-
-u32 gss_get_mic_kerberos(struct gss_ctx *, struct xdr_buf *,
-		struct xdr_netobj *);
-
-u32 gss_verify_mic_kerberos(struct gss_ctx *, struct xdr_buf *,
-		struct xdr_netobj *);
-
-u32
-gss_wrap_kerberos(struct gss_ctx *ctx_id, int offset,
-		struct xdr_buf *outbuf, struct page **pages);
-
-u32
-gss_unwrap_kerberos(struct gss_ctx *ctx_id, int offset,
-		struct xdr_buf *buf);
-
-
-u32
-krb5_encrypt(struct crypto_blkcipher *key,
-	     void *iv, void *in, void *out, int length);
-
-u32
-krb5_decrypt(struct crypto_blkcipher *key,
-	     void *iv, void *in, void *out, int length); 
-
-int
-gss_encrypt_xdr_buf(struct crypto_blkcipher *tfm, struct xdr_buf *outbuf,
-		    int offset, struct page **pages);
-
-int
-gss_decrypt_xdr_buf(struct crypto_blkcipher *tfm, struct xdr_buf *inbuf,
-		    int offset);
-
-s32
-krb5_make_seq_num(struct krb5_ctx *kctx,
-		struct crypto_blkcipher *key,
-		int direction,
-		u32 seqnum, unsigned char *cksum, unsigned char *buf);
-
-s32
-krb5_get_seq_num(struct krb5_ctx *kctx,
-	       unsigned char *cksum,
-	       unsigned char *buf, int *direction, u32 *seqnum);
-
-int
-xdr_extend_head(struct xdr_buf *buf, unsigned int base, unsigned int shiftlen);
-
-u32
-krb5_derive_key(const struct gss_krb5_enctype *gk5e,
-		const struct xdr_netobj *inkey,
-		struct xdr_netobj *outkey,
-		const struct xdr_netobj *in_constant,
-		gfp_t gfp_mask);
-
-u32
-gss_krb5_des3_make_key(const struct gss_krb5_enctype *gk5e,
-		       struct xdr_netobj *randombits,
-		       struct xdr_netobj *key);
-
-u32
-gss_krb5_aes_make_key(const struct gss_krb5_enctype *gk5e,
-		      struct xdr_netobj *randombits,
-		      struct xdr_netobj *key);
-
-u32
-gss_krb5_aes_encrypt(struct krb5_ctx *kctx, u32 offset,
-		     struct xdr_buf *buf, int ec,
-		     struct page **pages);
-
-u32
-gss_krb5_aes_decrypt(struct krb5_ctx *kctx, u32 offset,
-		     struct xdr_buf *buf, u32 *plainoffset,
-		     u32 *plainlen);
-
-int
-krb5_rc4_setup_seq_key(struct krb5_ctx *kctx,
-		       struct crypto_blkcipher *cipher,
-		       unsigned char *cksum);
-
-int
-krb5_rc4_setup_enc_key(struct krb5_ctx *kctx,
-		       struct crypto_blkcipher *cipher,
-		       s32 seqnum);
-void
-gss_krb5_make_confounder(char *p, u32 conflen);
diff --git a/ANDROID_3.4.5/include/linux/sunrpc/gss_krb5_enctypes.h b/ANDROID_3.4.5/include/linux/sunrpc/gss_krb5_enctypes.h
deleted file mode 100644
index ec6234ee..00000000
--- a/ANDROID_3.4.5/include/linux/sunrpc/gss_krb5_enctypes.h
+++ /dev/null
@@ -1,4 +0,0 @@
-/*
- * Dumb way to share this static piece of information with nfsd
- */
-#define KRB5_SUPPORTED_ENCTYPES "18,17,16,23,3,1,2"
diff --git a/ANDROID_3.4.5/include/linux/sunrpc/metrics.h b/ANDROID_3.4.5/include/linux/sunrpc/metrics.h
deleted file mode 100644
index 1565bbe8..00000000
--- a/ANDROID_3.4.5/include/linux/sunrpc/metrics.h
+++ /dev/null
@@ -1,92 +0,0 @@
-/*
- *  linux/include/linux/sunrpc/metrics.h
- *
- *  Declarations for RPC client per-operation metrics
- *
- *  Copyright (C) 2005	Chuck Lever <cel@netapp.com>
- *
- *  RPC client per-operation statistics provide latency and retry
- *  information about each type of RPC procedure in a given RPC program.
- *  These statistics are not for detailed problem diagnosis, but simply
- *  to indicate whether the problem is local or remote.
- *
- *  These counters are not meant to be human-readable, but are meant to be
- *  integrated into system monitoring tools such as "sar" and "iostat".  As
- *  such, the counters are sampled by the tools over time, and are never
- *  zeroed after a file system is mounted.  Moving averages can be computed
- *  by the tools by taking the difference between two instantaneous samples
- *  and dividing that by the time between the samples.
- *
- *  The counters are maintained in a single array per RPC client, indexed
- *  by procedure number.  There is no need to maintain separate counter
- *  arrays per-CPU because these counters are always modified behind locks.
- */
-
-#ifndef _LINUX_SUNRPC_METRICS_H
-#define _LINUX_SUNRPC_METRICS_H
-
-#include <linux/seq_file.h>
-#include <linux/ktime.h>
-
-#define RPC_IOSTATS_VERS	"1.0"
-
-struct rpc_iostats {
-	/*
-	 * These counters give an idea about how many request
-	 * transmissions are required, on average, to complete that
-	 * particular procedure.  Some procedures may require more
-	 * than one transmission because the server is unresponsive,
-	 * the client is retransmitting too aggressively, or the
-	 * requests are large and the network is congested.
-	 */
-	unsigned long		om_ops,		/* count of operations */
-				om_ntrans,	/* count of RPC transmissions */
-				om_timeouts;	/* count of major timeouts */
-
-	/*
-	 * These count how many bytes are sent and received for a
-	 * given RPC procedure type.  This indicates how much load a
-	 * particular procedure is putting on the network.  These
-	 * counts include the RPC and ULP headers, and the request
-	 * payload.
-	 */
-	unsigned long long      om_bytes_sent,	/* count of bytes out */
-				om_bytes_recv;	/* count of bytes in */
-
-	/*
-	 * The length of time an RPC request waits in queue before
-	 * transmission, the network + server latency of the request,
-	 * and the total time the request spent from init to release
-	 * are measured.
-	 */
-	ktime_t			om_queue,	/* queued for xmit */
-				om_rtt,		/* RPC RTT */
-				om_execute;	/* RPC execution */
-} ____cacheline_aligned;
-
-struct rpc_task;
-struct rpc_clnt;
-
-/*
- * EXPORTed functions for managing rpc_iostats structures
- */
-
-#ifdef CONFIG_PROC_FS
-
-struct rpc_iostats *	rpc_alloc_iostats(struct rpc_clnt *);
-void			rpc_count_iostats(const struct rpc_task *,
-					  struct rpc_iostats *);
-void			rpc_print_iostats(struct seq_file *, struct rpc_clnt *);
-void			rpc_free_iostats(struct rpc_iostats *);
-
-#else  /*  CONFIG_PROC_FS  */
-
-static inline struct rpc_iostats *rpc_alloc_iostats(struct rpc_clnt *clnt) { return NULL; }
-static inline void rpc_count_iostats(const struct rpc_task *task,
-				     struct rpc_iostats *stats) {}
-static inline void rpc_print_iostats(struct seq_file *seq, struct rpc_clnt *clnt) {}
-static inline void rpc_free_iostats(struct rpc_iostats *stats) {}
-
-#endif  /*  CONFIG_PROC_FS  */
-
-#endif /* _LINUX_SUNRPC_METRICS_H */
diff --git a/ANDROID_3.4.5/include/linux/sunrpc/msg_prot.h b/ANDROID_3.4.5/include/linux/sunrpc/msg_prot.h
deleted file mode 100644
index c68a1479..00000000
--- a/ANDROID_3.4.5/include/linux/sunrpc/msg_prot.h
+++ /dev/null
@@ -1,211 +0,0 @@
-/*
- * linux/include/linux/sunrpc/msg_prot.h
- *
- * Copyright (C) 1996, Olaf Kirch <okir@monad.swb.de>
- */
-
-#ifndef _LINUX_SUNRPC_MSGPROT_H_
-#define _LINUX_SUNRPC_MSGPROT_H_
-
-#ifdef __KERNEL__ /* user programs should get these from the rpc header files */
-
-#define RPC_VERSION 2
-
-/* size of an XDR encoding unit in bytes, i.e. 32bit */
-#define XDR_UNIT	(4)
-
-/* spec defines authentication flavor as an unsigned 32 bit integer */
-typedef u32	rpc_authflavor_t;
-
-enum rpc_auth_flavors {
-	RPC_AUTH_NULL  = 0,
-	RPC_AUTH_UNIX  = 1,
-	RPC_AUTH_SHORT = 2,
-	RPC_AUTH_DES   = 3,
-	RPC_AUTH_KRB   = 4,
-	RPC_AUTH_GSS   = 6,
-	RPC_AUTH_MAXFLAVOR = 8,
-	/* pseudoflavors: */
-	RPC_AUTH_GSS_KRB5  = 390003,
-	RPC_AUTH_GSS_KRB5I = 390004,
-	RPC_AUTH_GSS_KRB5P = 390005,
-	RPC_AUTH_GSS_LKEY  = 390006,
-	RPC_AUTH_GSS_LKEYI = 390007,
-	RPC_AUTH_GSS_LKEYP = 390008,
-	RPC_AUTH_GSS_SPKM  = 390009,
-	RPC_AUTH_GSS_SPKMI = 390010,
-	RPC_AUTH_GSS_SPKMP = 390011,
-};
-
-/* Maximum size (in bytes) of an rpc credential or verifier */
-#define RPC_MAX_AUTH_SIZE (400)
-
-enum rpc_msg_type {
-	RPC_CALL = 0,
-	RPC_REPLY = 1
-};
-
-enum rpc_reply_stat {
-	RPC_MSG_ACCEPTED = 0,
-	RPC_MSG_DENIED = 1
-};
-
-enum rpc_accept_stat {
-	RPC_SUCCESS = 0,
-	RPC_PROG_UNAVAIL = 1,
-	RPC_PROG_MISMATCH = 2,
-	RPC_PROC_UNAVAIL = 3,
-	RPC_GARBAGE_ARGS = 4,
-	RPC_SYSTEM_ERR = 5,
-	/* internal use only */
-	RPC_DROP_REPLY = 60000,
-};
-
-enum rpc_reject_stat {
-	RPC_MISMATCH = 0,
-	RPC_AUTH_ERROR = 1
-};
-
-enum rpc_auth_stat {
-	RPC_AUTH_OK = 0,
-	RPC_AUTH_BADCRED = 1,
-	RPC_AUTH_REJECTEDCRED = 2,
-	RPC_AUTH_BADVERF = 3,
-	RPC_AUTH_REJECTEDVERF = 4,
-	RPC_AUTH_TOOWEAK = 5,
-	/* RPCSEC_GSS errors */
-	RPCSEC_GSS_CREDPROBLEM = 13,
-	RPCSEC_GSS_CTXPROBLEM = 14
-};
-
-#define RPC_MAXNETNAMELEN	256
-
-/*
- * From RFC 1831:
- *
- * "A record is composed of one or more record fragments.  A record
- *  fragment is a four-byte header followed by 0 to (2**31) - 1 bytes of
- *  fragment data.  The bytes encode an unsigned binary number; as with
- *  XDR integers, the byte order is from highest to lowest.  The number
- *  encodes two values -- a boolean which indicates whether the fragment
- *  is the last fragment of the record (bit value 1 implies the fragment
- *  is the last fragment) and a 31-bit unsigned binary value which is the
- *  length in bytes of the fragment's data.  The boolean value is the
- *  highest-order bit of the header; the length is the 31 low-order bits.
- *  (Note that this record specification is NOT in XDR standard form!)"
- *
- * The Linux RPC client always sends its requests in a single record
- * fragment, limiting the maximum payload size for stream transports to
- * 2GB.
- */
-
-typedef __be32	rpc_fraghdr;
-
-#define	RPC_LAST_STREAM_FRAGMENT	(1U << 31)
-#define	RPC_FRAGMENT_SIZE_MASK		(~RPC_LAST_STREAM_FRAGMENT)
-#define	RPC_MAX_FRAGMENT_SIZE		((1U << 31) - 1)
-
-/*
- * RPC call and reply header size as number of 32bit words (verifier
- * size computed separately, see below)
- */
-#define RPC_CALLHDRSIZE		(6)
-#define RPC_REPHDRSIZE		(4)
-
-
-/*
- * Maximum RPC header size, including authentication,
- * as number of 32bit words (see RFCs 1831, 1832).
- *
- *	xid			    1 xdr unit = 4 bytes
- *	mtype			    1
- *	rpc_version		    1
- *	program			    1
- *	prog_version		    1
- *	procedure		    1
- *	cred {
- *	    flavor		    1
- *	    length		    1
- *	    body<RPC_MAX_AUTH_SIZE> 100 xdr units = 400 bytes
- *	}
- *	verf {
- *	    flavor		    1
- *	    length		    1
- *	    body<RPC_MAX_AUTH_SIZE> 100 xdr units = 400 bytes
- *	}
- *	TOTAL			    210 xdr units = 840 bytes
- */
-#define RPC_MAX_HEADER_WITH_AUTH \
-	(RPC_CALLHDRSIZE + 2*(2+RPC_MAX_AUTH_SIZE/4))
-
-/*
- * RFC1833/RFC3530 rpcbind (v3+) well-known netid's.
- */
-#define RPCBIND_NETID_UDP	"udp"
-#define RPCBIND_NETID_TCP	"tcp"
-#define RPCBIND_NETID_UDP6	"udp6"
-#define RPCBIND_NETID_TCP6	"tcp6"
-#define RPCBIND_NETID_LOCAL	"local"
-
-/*
- * Note that RFC 1833 does not put any size restrictions on the
- * netid string, but all currently defined netid's fit in 4 bytes.
- */
-#define RPCBIND_MAXNETIDLEN	(4u)
-
-/*
- * Universal addresses are introduced in RFC 1833 and further spelled
- * out in RFC 3530.  RPCBIND_MAXUADDRLEN defines a maximum byte length
- * of a universal address for use in allocating buffers and character
- * arrays.
- *
- * Quoting RFC 3530, section 2.2:
- *
- * For TCP over IPv4 and for UDP over IPv4, the format of r_addr is the
- * US-ASCII string:
- *
- *	h1.h2.h3.h4.p1.p2
- *
- * The prefix, "h1.h2.h3.h4", is the standard textual form for
- * representing an IPv4 address, which is always four octets long.
- * Assuming big-endian ordering, h1, h2, h3, and h4, are respectively,
- * the first through fourth octets each converted to ASCII-decimal.
- * Assuming big-endian ordering, p1 and p2 are, respectively, the first
- * and second octets each converted to ASCII-decimal.  For example, if a
- * host, in big-endian order, has an address of 0x0A010307 and there is
- * a service listening on, in big endian order, port 0x020F (decimal
- * 527), then the complete universal address is "10.1.3.7.2.15".
- *
- * ...
- *
- * For TCP over IPv6 and for UDP over IPv6, the format of r_addr is the
- * US-ASCII string:
- *
- *	x1:x2:x3:x4:x5:x6:x7:x8.p1.p2
- *
- * The suffix "p1.p2" is the service port, and is computed the same way
- * as with universal addresses for TCP and UDP over IPv4.  The prefix,
- * "x1:x2:x3:x4:x5:x6:x7:x8", is the standard textual form for
- * representing an IPv6 address as defined in Section 2.2 of [RFC2373].
- * Additionally, the two alternative forms specified in Section 2.2 of
- * [RFC2373] are also acceptable.
- */
-
-#include <linux/inet.h>
-
-/* Maximum size of the port number part of a universal address */
-#define RPCBIND_MAXUADDRPLEN	sizeof(".255.255")
-
-/* Maximum size of an IPv4 universal address */
-#define RPCBIND_MAXUADDR4LEN	\
-		(INET_ADDRSTRLEN + RPCBIND_MAXUADDRPLEN)
-
-/* Maximum size of an IPv6 universal address */
-#define RPCBIND_MAXUADDR6LEN	\
-		(INET6_ADDRSTRLEN + RPCBIND_MAXUADDRPLEN)
-
-/* Assume INET6_ADDRSTRLEN will always be larger than INET_ADDRSTRLEN... */
-#define RPCBIND_MAXUADDRLEN	RPCBIND_MAXUADDR6LEN
-
-#endif /* __KERNEL__ */
-#endif /* _LINUX_SUNRPC_MSGPROT_H_ */
diff --git a/ANDROID_3.4.5/include/linux/sunrpc/rpc_pipe_fs.h b/ANDROID_3.4.5/include/linux/sunrpc/rpc_pipe_fs.h
deleted file mode 100644
index a7b422b3..00000000
--- a/ANDROID_3.4.5/include/linux/sunrpc/rpc_pipe_fs.h
+++ /dev/null
@@ -1,97 +0,0 @@
-#ifndef _LINUX_SUNRPC_RPC_PIPE_FS_H
-#define _LINUX_SUNRPC_RPC_PIPE_FS_H
-
-#ifdef __KERNEL__
-
-#include <linux/workqueue.h>
-
-struct rpc_pipe_msg {
-	struct list_head list;
-	void *data;
-	size_t len;
-	size_t copied;
-	int errno;
-};
-
-struct rpc_pipe_ops {
-	ssize_t (*upcall)(struct file *, struct rpc_pipe_msg *, char __user *, size_t);
-	ssize_t (*downcall)(struct file *, const char __user *, size_t);
-	void (*release_pipe)(struct inode *);
-	int (*open_pipe)(struct inode *);
-	void (*destroy_msg)(struct rpc_pipe_msg *);
-};
-
-struct rpc_pipe {
-	struct list_head pipe;
-	struct list_head in_upcall;
-	struct list_head in_downcall;
-	int pipelen;
-	int nreaders;
-	int nwriters;
-#define RPC_PIPE_WAIT_FOR_OPEN	1
-	int flags;
-	struct delayed_work queue_timeout;
-	const struct rpc_pipe_ops *ops;
-	spinlock_t lock;
-	struct dentry *dentry;
-};
-
-struct rpc_inode {
-	struct inode vfs_inode;
-	void *private;
-	struct rpc_pipe *pipe;
-	wait_queue_head_t waitq;
-};
-
-static inline struct rpc_inode *
-RPC_I(struct inode *inode)
-{
-	return container_of(inode, struct rpc_inode, vfs_inode);
-}
-
-enum {
-	SUNRPC_PIPEFS_NFS_PRIO,
-	SUNRPC_PIPEFS_RPC_PRIO,
-};
-
-extern int rpc_pipefs_notifier_register(struct notifier_block *);
-extern void rpc_pipefs_notifier_unregister(struct notifier_block *);
-
-enum {
-	RPC_PIPEFS_MOUNT,
-	RPC_PIPEFS_UMOUNT,
-};
-
-extern struct dentry *rpc_d_lookup_sb(const struct super_block *sb,
-				      const unsigned char *dir_name);
-extern void rpc_pipefs_init_net(struct net *net);
-extern struct super_block *rpc_get_sb_net(const struct net *net);
-extern void rpc_put_sb_net(const struct net *net);
-
-extern ssize_t rpc_pipe_generic_upcall(struct file *, struct rpc_pipe_msg *,
-				       char __user *, size_t);
-extern int rpc_queue_upcall(struct rpc_pipe *, struct rpc_pipe_msg *);
-
-struct rpc_clnt;
-extern struct dentry *rpc_create_client_dir(struct dentry *, struct qstr *, struct rpc_clnt *);
-extern int rpc_remove_client_dir(struct dentry *);
-
-struct cache_detail;
-extern struct dentry *rpc_create_cache_dir(struct dentry *,
-					   struct qstr *,
-					   umode_t umode,
-					   struct cache_detail *);
-extern void rpc_remove_cache_dir(struct dentry *);
-
-extern int rpc_rmdir(struct dentry *dentry);
-
-struct rpc_pipe *rpc_mkpipe_data(const struct rpc_pipe_ops *ops, int flags);
-void rpc_destroy_pipe_data(struct rpc_pipe *pipe);
-extern struct dentry *rpc_mkpipe_dentry(struct dentry *, const char *, void *,
-					struct rpc_pipe *);
-extern int rpc_unlink(struct dentry *);
-extern int register_rpc_pipefs(void);
-extern void unregister_rpc_pipefs(void);
-
-#endif
-#endif
diff --git a/ANDROID_3.4.5/include/linux/sunrpc/rpc_rdma.h b/ANDROID_3.4.5/include/linux/sunrpc/rpc_rdma.h
deleted file mode 100644
index b78f16b1..00000000
--- a/ANDROID_3.4.5/include/linux/sunrpc/rpc_rdma.h
+++ /dev/null
@@ -1,118 +0,0 @@
-/*
- * Copyright (c) 2003-2007 Network Appliance, Inc. All rights reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses.  You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the BSD-type
- * license below:
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- *      Redistributions of source code must retain the above copyright
- *      notice, this list of conditions and the following disclaimer.
- *
- *      Redistributions in binary form must reproduce the above
- *      copyright notice, this list of conditions and the following
- *      disclaimer in the documentation and/or other materials provided
- *      with the distribution.
- *
- *      Neither the name of the Network Appliance, Inc. nor the names of
- *      its contributors may be used to endorse or promote products
- *      derived from this software without specific prior written
- *      permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#ifndef _LINUX_SUNRPC_RPC_RDMA_H
-#define _LINUX_SUNRPC_RPC_RDMA_H
-
-#include <linux/types.h>
-
-struct rpcrdma_segment {
-	__be32 rs_handle;	/* Registered memory handle */
-	__be32 rs_length;	/* Length of the chunk in bytes */
-	__be64 rs_offset;	/* Chunk virtual address or offset */
-};
-
-/*
- * read chunk(s), encoded as a linked list.
- */
-struct rpcrdma_read_chunk {
-	__be32 rc_discrim;	/* 1 indicates presence */
-	__be32 rc_position;	/* Position in XDR stream */
-	struct rpcrdma_segment rc_target;
-};
-
-/*
- * write chunk, and reply chunk.
- */
-struct rpcrdma_write_chunk {
-	struct rpcrdma_segment wc_target;
-};
-
-/*
- * write chunk(s), encoded as a counted array.
- */
-struct rpcrdma_write_array {
-	__be32 wc_discrim;	/* 1 indicates presence */
-	__be32 wc_nchunks;	/* Array count */
-	struct rpcrdma_write_chunk wc_array[0];
-};
-
-struct rpcrdma_msg {
-	__be32 rm_xid;	/* Mirrors the RPC header xid */
-	__be32 rm_vers;	/* Version of this protocol */
-	__be32 rm_credit;	/* Buffers requested/granted */
-	__be32 rm_type;	/* Type of message (enum rpcrdma_proc) */
-	union {
-
-		struct {			/* no chunks */
-			__be32 rm_empty[3];	/* 3 empty chunk lists */
-		} rm_nochunks;
-
-		struct {			/* no chunks and padded */
-			__be32 rm_align;	/* Padding alignment */
-			__be32 rm_thresh;	/* Padding threshold */
-			__be32 rm_pempty[3];	/* 3 empty chunk lists */
-		} rm_padded;
-
-		__be32 rm_chunks[0];	/* read, write and reply chunks */
-
-	} rm_body;
-};
-
-#define RPCRDMA_HDRLEN_MIN	28
-
-enum rpcrdma_errcode {
-	ERR_VERS = 1,
-	ERR_CHUNK = 2
-};
-
-struct rpcrdma_err_vers {
-	uint32_t rdma_vers_low;	/* Version range supported by peer */
-	uint32_t rdma_vers_high;
-};
-
-enum rpcrdma_proc {
-	RDMA_MSG = 0,		/* An RPC call or reply msg */
-	RDMA_NOMSG = 1,		/* An RPC call or reply msg - separate body */
-	RDMA_MSGP = 2,		/* An RPC call or reply msg with padding */
-	RDMA_DONE = 3,		/* Client signals reply completion */
-	RDMA_ERROR = 4		/* An RPC RDMA encoding error */
-};
-
-#endif				/* _LINUX_SUNRPC_RPC_RDMA_H */
diff --git a/ANDROID_3.4.5/include/linux/sunrpc/sched.h b/ANDROID_3.4.5/include/linux/sunrpc/sched.h
deleted file mode 100644
index dc0c3cc3..00000000
--- a/ANDROID_3.4.5/include/linux/sunrpc/sched.h
+++ /dev/null
@@ -1,292 +0,0 @@
-/*
- * linux/include/linux/sunrpc/sched.h
- *
- * Scheduling primitives for kernel Sun RPC.
- *
- * Copyright (C) 1996, Olaf Kirch <okir@monad.swb.de>
- */
-
-#ifndef _LINUX_SUNRPC_SCHED_H_
-#define _LINUX_SUNRPC_SCHED_H_
-
-#include <linux/timer.h>
-#include <linux/ktime.h>
-#include <linux/sunrpc/types.h>
-#include <linux/spinlock.h>
-#include <linux/wait.h>
-#include <linux/workqueue.h>
-#include <linux/sunrpc/xdr.h>
-
-/*
- * This is the actual RPC procedure call info.
- */
-struct rpc_procinfo;
-struct rpc_message {
-	struct rpc_procinfo *	rpc_proc;	/* Procedure information */
-	void *			rpc_argp;	/* Arguments */
-	void *			rpc_resp;	/* Result */
-	struct rpc_cred *	rpc_cred;	/* Credentials */
-};
-
-struct rpc_call_ops;
-struct rpc_wait_queue;
-struct rpc_wait {
-	struct list_head	list;		/* wait queue links */
-	struct list_head	links;		/* Links to related tasks */
-	struct list_head	timer_list;	/* Timer list */
-	unsigned long		expires;
-};
-
-/*
- * This is the RPC task struct
- */
-struct rpc_task {
-	atomic_t		tk_count;	/* Reference count */
-	struct list_head	tk_task;	/* global list of tasks */
-	struct rpc_clnt *	tk_client;	/* RPC client */
-	struct rpc_rqst *	tk_rqstp;	/* RPC request */
-
-	/*
-	 * RPC call state
-	 */
-	struct rpc_message	tk_msg;		/* RPC call info */
-
-	/*
-	 * callback	to be executed after waking up
-	 * action	next procedure for async tasks
-	 * tk_ops	caller callbacks
-	 */
-	void			(*tk_callback)(struct rpc_task *);
-	void			(*tk_action)(struct rpc_task *);
-	const struct rpc_call_ops *tk_ops;
-	void *			tk_calldata;
-
-	unsigned long		tk_timeout;	/* timeout for rpc_sleep() */
-	unsigned long		tk_runstate;	/* Task run status */
-	struct workqueue_struct	*tk_workqueue;	/* Normally rpciod, but could
-						 * be any workqueue
-						 */
-	struct rpc_wait_queue 	*tk_waitqueue;	/* RPC wait queue we're on */
-	union {
-		struct work_struct	tk_work;	/* Async task work queue */
-		struct rpc_wait		tk_wait;	/* RPC wait */
-	} u;
-
-	ktime_t			tk_start;	/* RPC task init timestamp */
-
-	pid_t			tk_owner;	/* Process id for batching tasks */
-	int			tk_status;	/* result of last operation */
-	unsigned short		tk_flags;	/* misc flags */
-	unsigned short		tk_timeouts;	/* maj timeouts */
-
-#ifdef RPC_DEBUG
-	unsigned short		tk_pid;		/* debugging aid */
-#endif
-	unsigned char		tk_priority : 2,/* Task priority */
-				tk_garb_retry : 2,
-				tk_cred_retry : 2,
-				tk_rebind_retry : 2;
-};
-#define tk_xprt			tk_client->cl_xprt
-
-/* support walking a list of tasks on a wait queue */
-#define	task_for_each(task, pos, head) \
-	list_for_each(pos, head) \
-		if ((task=list_entry(pos, struct rpc_task, u.tk_wait.list)),1)
-
-#define	task_for_first(task, head) \
-	if (!list_empty(head) &&  \
-	    ((task=list_entry((head)->next, struct rpc_task, u.tk_wait.list)),1))
-
-typedef void			(*rpc_action)(struct rpc_task *);
-
-struct rpc_call_ops {
-	void (*rpc_call_prepare)(struct rpc_task *, void *);
-	void (*rpc_call_done)(struct rpc_task *, void *);
-	void (*rpc_count_stats)(struct rpc_task *, void *);
-	void (*rpc_release)(void *);
-};
-
-struct rpc_task_setup {
-	struct rpc_task *task;
-	struct rpc_clnt *rpc_client;
-	const struct rpc_message *rpc_message;
-	const struct rpc_call_ops *callback_ops;
-	void *callback_data;
-	struct workqueue_struct *workqueue;
-	unsigned short flags;
-	signed char priority;
-};
-
-/*
- * RPC task flags
- */
-#define RPC_TASK_ASYNC		0x0001		/* is an async task */
-#define RPC_TASK_SWAPPER	0x0002		/* is swapping in/out */
-#define RPC_CALL_MAJORSEEN	0x0020		/* major timeout seen */
-#define RPC_TASK_ROOTCREDS	0x0040		/* force root creds */
-#define RPC_TASK_DYNAMIC	0x0080		/* task was kmalloc'ed */
-#define RPC_TASK_KILLED		0x0100		/* task was killed */
-#define RPC_TASK_SOFT		0x0200		/* Use soft timeouts */
-#define RPC_TASK_SOFTCONN	0x0400		/* Fail if can't connect */
-#define RPC_TASK_SENT		0x0800		/* message was sent */
-#define RPC_TASK_TIMEOUT	0x1000		/* fail with ETIMEDOUT on timeout */
-
-#define RPC_IS_ASYNC(t)		((t)->tk_flags & RPC_TASK_ASYNC)
-#define RPC_IS_SWAPPER(t)	((t)->tk_flags & RPC_TASK_SWAPPER)
-#define RPC_DO_ROOTOVERRIDE(t)	((t)->tk_flags & RPC_TASK_ROOTCREDS)
-#define RPC_ASSASSINATED(t)	((t)->tk_flags & RPC_TASK_KILLED)
-#define RPC_IS_SOFT(t)		((t)->tk_flags & (RPC_TASK_SOFT|RPC_TASK_TIMEOUT))
-#define RPC_IS_SOFTCONN(t)	((t)->tk_flags & RPC_TASK_SOFTCONN)
-#define RPC_WAS_SENT(t)		((t)->tk_flags & RPC_TASK_SENT)
-
-#define RPC_TASK_RUNNING	0
-#define RPC_TASK_QUEUED		1
-#define RPC_TASK_ACTIVE		2
-
-#define RPC_IS_RUNNING(t)	test_bit(RPC_TASK_RUNNING, &(t)->tk_runstate)
-#define rpc_set_running(t)	set_bit(RPC_TASK_RUNNING, &(t)->tk_runstate)
-#define rpc_test_and_set_running(t) \
-				test_and_set_bit(RPC_TASK_RUNNING, &(t)->tk_runstate)
-#define rpc_clear_running(t)	\
-	do { \
-		smp_mb__before_clear_bit(); \
-		clear_bit(RPC_TASK_RUNNING, &(t)->tk_runstate); \
-		smp_mb__after_clear_bit(); \
-	} while (0)
-
-#define RPC_IS_QUEUED(t)	test_bit(RPC_TASK_QUEUED, &(t)->tk_runstate)
-#define rpc_set_queued(t)	set_bit(RPC_TASK_QUEUED, &(t)->tk_runstate)
-#define rpc_clear_queued(t)	\
-	do { \
-		smp_mb__before_clear_bit(); \
-		clear_bit(RPC_TASK_QUEUED, &(t)->tk_runstate); \
-		smp_mb__after_clear_bit(); \
-	} while (0)
-
-#define RPC_IS_ACTIVATED(t)	test_bit(RPC_TASK_ACTIVE, &(t)->tk_runstate)
-
-/*
- * Task priorities.
- * Note: if you change these, you must also change
- * the task initialization definitions below.
- */
-#define RPC_PRIORITY_LOW	(-1)
-#define RPC_PRIORITY_NORMAL	(0)
-#define RPC_PRIORITY_HIGH	(1)
-#define RPC_PRIORITY_PRIVILEGED	(2)
-#define RPC_NR_PRIORITY		(1 + RPC_PRIORITY_PRIVILEGED - RPC_PRIORITY_LOW)
-
-struct rpc_timer {
-	struct timer_list timer;
-	struct list_head list;
-	unsigned long expires;
-};
-
-/*
- * RPC synchronization objects
- */
-struct rpc_wait_queue {
-	spinlock_t		lock;
-	struct list_head	tasks[RPC_NR_PRIORITY];	/* task queue for each priority level */
-	pid_t			owner;			/* process id of last task serviced */
-	unsigned char		maxpriority;		/* maximum priority (0 if queue is not a priority queue) */
-	unsigned char		priority;		/* current priority */
-	unsigned char		count;			/* # task groups remaining serviced so far */
-	unsigned char		nr;			/* # tasks remaining for cookie */
-	unsigned short		qlen;			/* total # tasks waiting in queue */
-	struct rpc_timer	timer_list;
-#if defined(RPC_DEBUG) || defined(RPC_TRACEPOINTS)
-	const char *		name;
-#endif
-};
-
-/*
- * This is the # requests to send consecutively
- * from a single cookie.  The aim is to improve
- * performance of NFS operations such as read/write.
- */
-#define RPC_BATCH_COUNT			16
-#define RPC_IS_PRIORITY(q)		((q)->maxpriority > 0)
-
-/*
- * Function prototypes
- */
-struct rpc_task *rpc_new_task(const struct rpc_task_setup *);
-struct rpc_task *rpc_run_task(const struct rpc_task_setup *);
-struct rpc_task *rpc_run_bc_task(struct rpc_rqst *req,
-				const struct rpc_call_ops *ops);
-void		rpc_put_task(struct rpc_task *);
-void		rpc_put_task_async(struct rpc_task *);
-void		rpc_exit_task(struct rpc_task *);
-void		rpc_exit(struct rpc_task *, int);
-void		rpc_release_calldata(const struct rpc_call_ops *, void *);
-void		rpc_killall_tasks(struct rpc_clnt *);
-void		rpc_execute(struct rpc_task *);
-void		rpc_init_priority_wait_queue(struct rpc_wait_queue *, const char *);
-void		rpc_init_wait_queue(struct rpc_wait_queue *, const char *);
-void		rpc_destroy_wait_queue(struct rpc_wait_queue *);
-void		rpc_sleep_on(struct rpc_wait_queue *, struct rpc_task *,
-					rpc_action action);
-void		rpc_sleep_on_priority(struct rpc_wait_queue *,
-					struct rpc_task *,
-					rpc_action action,
-					int priority);
-void		rpc_wake_up_queued_task(struct rpc_wait_queue *,
-					struct rpc_task *);
-void		rpc_wake_up(struct rpc_wait_queue *);
-struct rpc_task *rpc_wake_up_next(struct rpc_wait_queue *);
-struct rpc_task *rpc_wake_up_first(struct rpc_wait_queue *,
-					bool (*)(struct rpc_task *, void *),
-					void *);
-void		rpc_wake_up_status(struct rpc_wait_queue *, int);
-int		rpc_queue_empty(struct rpc_wait_queue *);
-void		rpc_delay(struct rpc_task *, unsigned long);
-void *		rpc_malloc(struct rpc_task *, size_t);
-void		rpc_free(void *);
-int		rpciod_up(void);
-void		rpciod_down(void);
-int		__rpc_wait_for_completion_task(struct rpc_task *task, int (*)(void *));
-#ifdef RPC_DEBUG
-struct net;
-void		rpc_show_tasks(struct net *);
-#endif
-int		rpc_init_mempool(void);
-void		rpc_destroy_mempool(void);
-extern struct workqueue_struct *rpciod_workqueue;
-void		rpc_prepare_task(struct rpc_task *task);
-
-static inline int rpc_wait_for_completion_task(struct rpc_task *task)
-{
-	return __rpc_wait_for_completion_task(task, NULL);
-}
-
-static inline void rpc_task_set_priority(struct rpc_task *task, unsigned char prio)
-{
-	task->tk_priority = prio - RPC_PRIORITY_LOW;
-}
-
-static inline int rpc_task_has_priority(struct rpc_task *task, unsigned char prio)
-{
-	return (task->tk_priority + RPC_PRIORITY_LOW == prio);
-}
-
-#if defined(RPC_DEBUG) || defined (RPC_TRACEPOINTS)
-static inline const char * rpc_qname(const struct rpc_wait_queue *q)
-{
-	return ((q && q->name) ? q->name : "unknown");
-}
-
-static inline void rpc_assign_waitqueue_name(struct rpc_wait_queue *q,
-		const char *name)
-{
-	q->name = name;
-}
-#else
-static inline void rpc_assign_waitqueue_name(struct rpc_wait_queue *q,
-		const char *name)
-{
-}
-#endif
-
-#endif /* _LINUX_SUNRPC_SCHED_H_ */
diff --git a/ANDROID_3.4.5/include/linux/sunrpc/stats.h b/ANDROID_3.4.5/include/linux/sunrpc/stats.h
deleted file mode 100644
index edc64219..00000000
--- a/ANDROID_3.4.5/include/linux/sunrpc/stats.h
+++ /dev/null
@@ -1,84 +0,0 @@
-/*
- * linux/include/linux/sunrpc/stats.h
- *
- * Client statistics collection for SUN RPC
- *
- * Copyright (C) 1996 Olaf Kirch <okir@monad.swb.de>
- */
-
-#ifndef _LINUX_SUNRPC_STATS_H
-#define _LINUX_SUNRPC_STATS_H
-
-#include <linux/proc_fs.h>
-
-struct rpc_stat {
-	const struct rpc_program *program;
-
-	unsigned int		netcnt,
-				netudpcnt,
-				nettcpcnt,
-				nettcpconn,
-				netreconn;
-	unsigned int		rpccnt,
-				rpcretrans,
-				rpcauthrefresh,
-				rpcgarbage;
-};
-
-struct svc_stat {
-	struct svc_program *	program;
-
-	unsigned int		netcnt,
-				netudpcnt,
-				nettcpcnt,
-				nettcpconn;
-	unsigned int		rpccnt,
-				rpcbadfmt,
-				rpcbadauth,
-				rpcbadclnt;
-};
-
-struct net;
-#ifdef CONFIG_PROC_FS
-int			rpc_proc_init(struct net *);
-void			rpc_proc_exit(struct net *);
-#else
-static inline int rpc_proc_init(struct net *net)
-{
-	return 0;
-}
-
-static inline void rpc_proc_exit(struct net *net)
-{
-}
-#endif
-
-#ifdef MODULE
-void			rpc_modcount(struct inode *, int);
-#endif
-
-#ifdef CONFIG_PROC_FS
-struct proc_dir_entry *	rpc_proc_register(struct net *,struct rpc_stat *);
-void			rpc_proc_unregister(struct net *,const char *);
-void			rpc_proc_zero(const struct rpc_program *);
-struct proc_dir_entry *	svc_proc_register(struct net *, struct svc_stat *,
-					  const struct file_operations *);
-void			svc_proc_unregister(struct net *, const char *);
-
-void			svc_seq_show(struct seq_file *,
-				     const struct svc_stat *);
-#else
-
-static inline struct proc_dir_entry *rpc_proc_register(struct net *net, struct rpc_stat *s) { return NULL; }
-static inline void rpc_proc_unregister(struct net *net, const char *p) {}
-static inline void rpc_proc_zero(const struct rpc_program *p) {}
-
-static inline struct proc_dir_entry *svc_proc_register(struct net *net, struct svc_stat *s,
-						       const struct file_operations *f) { return NULL; }
-static inline void svc_proc_unregister(struct net *net, const char *p) {}
-
-static inline void svc_seq_show(struct seq_file *seq,
-				const struct svc_stat *st) {}
-#endif
-
-#endif /* _LINUX_SUNRPC_STATS_H */
diff --git a/ANDROID_3.4.5/include/linux/sunrpc/svc.h b/ANDROID_3.4.5/include/linux/sunrpc/svc.h
deleted file mode 100644
index 2b43e021..00000000
--- a/ANDROID_3.4.5/include/linux/sunrpc/svc.h
+++ /dev/null
@@ -1,461 +0,0 @@
-/*
- * linux/include/linux/sunrpc/svc.h
- *
- * RPC server declarations.
- *
- * Copyright (C) 1995, 1996 Olaf Kirch <okir@monad.swb.de>
- */
-
-
-#ifndef SUNRPC_SVC_H
-#define SUNRPC_SVC_H
-
-#include <linux/in.h>
-#include <linux/in6.h>
-#include <linux/sunrpc/types.h>
-#include <linux/sunrpc/xdr.h>
-#include <linux/sunrpc/auth.h>
-#include <linux/sunrpc/svcauth.h>
-#include <linux/wait.h>
-#include <linux/mm.h>
-
-/*
- * This is the RPC server thread function prototype
- */
-typedef int		(*svc_thread_fn)(void *);
-
-/* statistics for svc_pool structures */
-struct svc_pool_stats {
-	unsigned long	packets;
-	unsigned long	sockets_queued;
-	unsigned long	threads_woken;
-	unsigned long	threads_timedout;
-};
-
-/*
- *
- * RPC service thread pool.
- *
- * Pool of threads and temporary sockets.  Generally there is only
- * a single one of these per RPC service, but on NUMA machines those
- * services that can benefit from it (i.e. nfs but not lockd) will
- * have one pool per NUMA node.  This optimisation reduces cross-
- * node traffic on multi-node NUMA NFS servers.
- */
-struct svc_pool {
-	unsigned int		sp_id;	    	/* pool id; also node id on NUMA */
-	spinlock_t		sp_lock;	/* protects all fields */
-	struct list_head	sp_threads;	/* idle server threads */
-	struct list_head	sp_sockets;	/* pending sockets */
-	unsigned int		sp_nrthreads;	/* # of threads in pool */
-	struct list_head	sp_all_threads;	/* all server threads */
-	struct svc_pool_stats	sp_stats;	/* statistics on pool operation */
-} ____cacheline_aligned_in_smp;
-
-/*
- * RPC service.
- *
- * An RPC service is a ``daemon,'' possibly multithreaded, which
- * receives and processes incoming RPC messages.
- * It has one or more transport sockets associated with it, and maintains
- * a list of idle threads waiting for input.
- *
- * We currently do not support more than one RPC program per daemon.
- */
-struct svc_serv {
-	struct svc_program *	sv_program;	/* RPC program */
-	struct svc_stat *	sv_stats;	/* RPC statistics */
-	spinlock_t		sv_lock;
-	unsigned int		sv_nrthreads;	/* # of server threads */
-	unsigned int		sv_maxconn;	/* max connections allowed or
-						 * '0' causing max to be based
-						 * on number of threads. */
-
-	unsigned int		sv_max_payload;	/* datagram payload size */
-	unsigned int		sv_max_mesg;	/* max_payload + 1 page for overheads */
-	unsigned int		sv_xdrsize;	/* XDR buffer size */
-	struct list_head	sv_permsocks;	/* all permanent sockets */
-	struct list_head	sv_tempsocks;	/* all temporary sockets */
-	int			sv_tmpcnt;	/* count of temporary sockets */
-	struct timer_list	sv_temptimer;	/* timer for aging temporary sockets */
-
-	char *			sv_name;	/* service name */
-
-	unsigned int		sv_nrpools;	/* number of thread pools */
-	struct svc_pool *	sv_pools;	/* array of thread pools */
-
-	void			(*sv_shutdown)(struct svc_serv *serv,
-					       struct net *net);
-						/* Callback to use when last thread
-						 * exits.
-						 */
-
-	struct module *		sv_module;	/* optional module to count when
-						 * adding threads */
-	svc_thread_fn		sv_function;	/* main function for threads */
-#if defined(CONFIG_SUNRPC_BACKCHANNEL)
-	struct list_head	sv_cb_list;	/* queue for callback requests
-						 * that arrive over the same
-						 * connection */
-	spinlock_t		sv_cb_lock;	/* protects the svc_cb_list */
-	wait_queue_head_t	sv_cb_waitq;	/* sleep here if there are no
-						 * entries in the svc_cb_list */
-	struct svc_xprt		*sv_bc_xprt;	/* callback on fore channel */
-#endif /* CONFIG_SUNRPC_BACKCHANNEL */
-};
-
-/*
- * We use sv_nrthreads as a reference count.  svc_destroy() drops
- * this refcount, so we need to bump it up around operations that
- * change the number of threads.  Horrible, but there it is.
- * Should be called with the BKL held.
- */
-static inline void svc_get(struct svc_serv *serv)
-{
-	serv->sv_nrthreads++;
-}
-
-/*
- * Maximum payload size supported by a kernel RPC server.
- * This is use to determine the max number of pages nfsd is
- * willing to return in a single READ operation.
- *
- * These happen to all be powers of 2, which is not strictly
- * necessary but helps enforce the real limitation, which is
- * that they should be multiples of PAGE_CACHE_SIZE.
- *
- * For UDP transports, a block plus NFS,RPC, and UDP headers
- * has to fit into the IP datagram limit of 64K.  The largest
- * feasible number for all known page sizes is probably 48K,
- * but we choose 32K here.  This is the same as the historical
- * Linux limit; someone who cares more about NFS/UDP performance
- * can test a larger number.
- *
- * For TCP transports we have more freedom.  A size of 1MB is
- * chosen to match the client limit.  Other OSes are known to
- * have larger limits, but those numbers are probably beyond
- * the point of diminishing returns.
- */
-#define RPCSVC_MAXPAYLOAD	(1*1024*1024u)
-#define RPCSVC_MAXPAYLOAD_TCP	RPCSVC_MAXPAYLOAD
-#define RPCSVC_MAXPAYLOAD_UDP	(32*1024u)
-
-extern u32 svc_max_payload(const struct svc_rqst *rqstp);
-
-/*
- * RPC Requsts and replies are stored in one or more pages.
- * We maintain an array of pages for each server thread.
- * Requests are copied into these pages as they arrive.  Remaining
- * pages are available to write the reply into.
- *
- * Pages are sent using ->sendpage so each server thread needs to
- * allocate more to replace those used in sending.  To help keep track
- * of these pages we have a receive list where all pages initialy live,
- * and a send list where pages are moved to when there are to be part
- * of a reply.
- *
- * We use xdr_buf for holding responses as it fits well with NFS
- * read responses (that have a header, and some data pages, and possibly
- * a tail) and means we can share some client side routines.
- *
- * The xdr_buf.head kvec always points to the first page in the rq_*pages
- * list.  The xdr_buf.pages pointer points to the second page on that
- * list.  xdr_buf.tail points to the end of the first page.
- * This assumes that the non-page part of an rpc reply will fit
- * in a page - NFSd ensures this.  lockd also has no trouble.
- *
- * Each request/reply pair can have at most one "payload", plus two pages,
- * one for the request, and one for the reply.
- * We using ->sendfile to return read data, we might need one extra page
- * if the request is not page-aligned.  So add another '1'.
- */
-#define RPCSVC_MAXPAGES		((RPCSVC_MAXPAYLOAD+PAGE_SIZE-1)/PAGE_SIZE \
-				+ 2 + 1)
-
-static inline u32 svc_getnl(struct kvec *iov)
-{
-	__be32 val, *vp;
-	vp = iov->iov_base;
-	val = *vp++;
-	iov->iov_base = (void*)vp;
-	iov->iov_len -= sizeof(__be32);
-	return ntohl(val);
-}
-
-static inline void svc_putnl(struct kvec *iov, u32 val)
-{
-	__be32 *vp = iov->iov_base + iov->iov_len;
-	*vp = htonl(val);
-	iov->iov_len += sizeof(__be32);
-}
-
-static inline __be32 svc_getu32(struct kvec *iov)
-{
-	__be32 val, *vp;
-	vp = iov->iov_base;
-	val = *vp++;
-	iov->iov_base = (void*)vp;
-	iov->iov_len -= sizeof(__be32);
-	return val;
-}
-
-static inline void svc_ungetu32(struct kvec *iov)
-{
-	__be32 *vp = (__be32 *)iov->iov_base;
-	iov->iov_base = (void *)(vp - 1);
-	iov->iov_len += sizeof(*vp);
-}
-
-static inline void svc_putu32(struct kvec *iov, __be32 val)
-{
-	__be32 *vp = iov->iov_base + iov->iov_len;
-	*vp = val;
-	iov->iov_len += sizeof(__be32);
-}
-
-/*
- * The context of a single thread, including the request currently being
- * processed.
- */
-struct svc_rqst {
-	struct list_head	rq_list;	/* idle list */
-	struct list_head	rq_all;		/* all threads list */
-	struct svc_xprt *	rq_xprt;	/* transport ptr */
-
-	struct sockaddr_storage	rq_addr;	/* peer address */
-	size_t			rq_addrlen;
-	struct sockaddr_storage	rq_daddr;	/* dest addr of request
-						 *  - reply from here */
-	size_t			rq_daddrlen;
-
-	struct svc_serv *	rq_server;	/* RPC service definition */
-	struct svc_pool *	rq_pool;	/* thread pool */
-	struct svc_procedure *	rq_procinfo;	/* procedure info */
-	struct auth_ops *	rq_authop;	/* authentication flavour */
-	u32			rq_flavor;	/* pseudoflavor */
-	struct svc_cred		rq_cred;	/* auth info */
-	void *			rq_xprt_ctxt;	/* transport specific context ptr */
-	struct svc_deferred_req*rq_deferred;	/* deferred request we are replaying */
-	int			rq_usedeferral;	/* use deferral */
-
-	size_t			rq_xprt_hlen;	/* xprt header len */
-	struct xdr_buf		rq_arg;
-	struct xdr_buf		rq_res;
-	struct page *		rq_pages[RPCSVC_MAXPAGES];
-	struct page *		*rq_respages;	/* points into rq_pages */
-	int			rq_resused;	/* number of pages used for result */
-
-	struct kvec		rq_vec[RPCSVC_MAXPAGES]; /* generally useful.. */
-
-	__be32			rq_xid;		/* transmission id */
-	u32			rq_prog;	/* program number */
-	u32			rq_vers;	/* program version */
-	u32			rq_proc;	/* procedure number */
-	u32			rq_prot;	/* IP protocol */
-	unsigned short
-				rq_secure  : 1;	/* secure port */
-
-	void *			rq_argp;	/* decoded arguments */
-	void *			rq_resp;	/* xdr'd results */
-	void *			rq_auth_data;	/* flavor-specific data */
-
-	int			rq_reserved;	/* space on socket outq
-						 * reserved for this request
-						 */
-
-	struct cache_req	rq_chandle;	/* handle passed to caches for 
-						 * request delaying 
-						 */
-	bool			rq_dropme;
-	/* Catering to nfsd */
-	struct auth_domain *	rq_client;	/* RPC peer info */
-	struct auth_domain *	rq_gssclient;	/* "gss/"-style peer info */
-	int			rq_cachetype;
-	struct svc_cacherep *	rq_cacherep;	/* cache info */
-	int			rq_splice_ok;   /* turned off in gss privacy
-						 * to prevent encrypting page
-						 * cache pages */
-	wait_queue_head_t	rq_wait;	/* synchronization */
-	struct task_struct	*rq_task;	/* service thread */
-};
-
-/*
- * Rigorous type checking on sockaddr type conversions
- */
-static inline struct sockaddr_in *svc_addr_in(const struct svc_rqst *rqst)
-{
-	return (struct sockaddr_in *) &rqst->rq_addr;
-}
-
-static inline struct sockaddr_in6 *svc_addr_in6(const struct svc_rqst *rqst)
-{
-	return (struct sockaddr_in6 *) &rqst->rq_addr;
-}
-
-static inline struct sockaddr *svc_addr(const struct svc_rqst *rqst)
-{
-	return (struct sockaddr *) &rqst->rq_addr;
-}
-
-static inline struct sockaddr_in *svc_daddr_in(const struct svc_rqst *rqst)
-{
-	return (struct sockaddr_in *) &rqst->rq_daddr;
-}
-
-static inline struct sockaddr_in6 *svc_daddr_in6(const struct svc_rqst *rqst)
-{
-	return (struct sockaddr_in6 *) &rqst->rq_daddr;
-}
-
-static inline struct sockaddr *svc_daddr(const struct svc_rqst *rqst)
-{
-	return (struct sockaddr *) &rqst->rq_daddr;
-}
-
-/*
- * Check buffer bounds after decoding arguments
- */
-static inline int
-xdr_argsize_check(struct svc_rqst *rqstp, __be32 *p)
-{
-	char *cp = (char *)p;
-	struct kvec *vec = &rqstp->rq_arg.head[0];
-	return cp >= (char*)vec->iov_base
-		&& cp <= (char*)vec->iov_base + vec->iov_len;
-}
-
-static inline int
-xdr_ressize_check(struct svc_rqst *rqstp, __be32 *p)
-{
-	struct kvec *vec = &rqstp->rq_res.head[0];
-	char *cp = (char*)p;
-
-	vec->iov_len = cp - (char*)vec->iov_base;
-
-	return vec->iov_len <= PAGE_SIZE;
-}
-
-static inline void svc_free_res_pages(struct svc_rqst *rqstp)
-{
-	while (rqstp->rq_resused) {
-		struct page **pp = (rqstp->rq_respages +
-				    --rqstp->rq_resused);
-		if (*pp) {
-			put_page(*pp);
-			*pp = NULL;
-		}
-	}
-}
-
-struct svc_deferred_req {
-	u32			prot;	/* protocol (UDP or TCP) */
-	struct svc_xprt		*xprt;
-	struct sockaddr_storage	addr;	/* where reply must go */
-	size_t			addrlen;
-	struct sockaddr_storage	daddr;	/* where reply must come from */
-	size_t			daddrlen;
-	struct cache_deferred_req handle;
-	size_t			xprt_hlen;
-	int			argslen;
-	__be32			args[0];
-};
-
-/*
- * List of RPC programs on the same transport endpoint
- */
-struct svc_program {
-	struct svc_program *	pg_next;	/* other programs (same xprt) */
-	u32			pg_prog;	/* program number */
-	unsigned int		pg_lovers;	/* lowest version */
-	unsigned int		pg_hivers;	/* lowest version */
-	unsigned int		pg_nvers;	/* number of versions */
-	struct svc_version **	pg_vers;	/* version array */
-	char *			pg_name;	/* service name */
-	char *			pg_class;	/* class name: services sharing authentication */
-	struct svc_stat *	pg_stats;	/* rpc statistics */
-	int			(*pg_authenticate)(struct svc_rqst *);
-};
-
-/*
- * RPC program version
- */
-struct svc_version {
-	u32			vs_vers;	/* version number */
-	u32			vs_nproc;	/* number of procedures */
-	struct svc_procedure *	vs_proc;	/* per-procedure info */
-	u32			vs_xdrsize;	/* xdrsize needed for this version */
-
-	unsigned int		vs_hidden : 1;	/* Don't register with portmapper.
-						 * Only used for nfsacl so far. */
-
-	/* Override dispatch function (e.g. when caching replies).
-	 * A return value of 0 means drop the request. 
-	 * vs_dispatch == NULL means use default dispatcher.
-	 */
-	int			(*vs_dispatch)(struct svc_rqst *, __be32 *);
-};
-
-/*
- * RPC procedure info
- */
-typedef __be32	(*svc_procfunc)(struct svc_rqst *, void *argp, void *resp);
-struct svc_procedure {
-	svc_procfunc		pc_func;	/* process the request */
-	kxdrproc_t		pc_decode;	/* XDR decode args */
-	kxdrproc_t		pc_encode;	/* XDR encode result */
-	kxdrproc_t		pc_release;	/* XDR free result */
-	unsigned int		pc_argsize;	/* argument struct size */
-	unsigned int		pc_ressize;	/* result struct size */
-	unsigned int		pc_count;	/* call count */
-	unsigned int		pc_cachetype;	/* cache info (NFS) */
-	unsigned int		pc_xdrressize;	/* maximum size of XDR reply */
-};
-
-/*
- * Function prototypes.
- */
-int svc_rpcb_setup(struct svc_serv *serv, struct net *net);
-void svc_rpcb_cleanup(struct svc_serv *serv, struct net *net);
-int svc_bind(struct svc_serv *serv, struct net *net);
-struct svc_serv *svc_create(struct svc_program *, unsigned int,
-			    void (*shutdown)(struct svc_serv *, struct net *net));
-struct svc_rqst *svc_prepare_thread(struct svc_serv *serv,
-					struct svc_pool *pool, int node);
-void		   svc_exit_thread(struct svc_rqst *);
-struct svc_serv *  svc_create_pooled(struct svc_program *, unsigned int,
-			void (*shutdown)(struct svc_serv *, struct net *net),
-			svc_thread_fn, struct module *);
-int		   svc_set_num_threads(struct svc_serv *, struct svc_pool *, int);
-int		   svc_pool_stats_open(struct svc_serv *serv, struct file *file);
-void		   svc_destroy(struct svc_serv *);
-void		   svc_shutdown_net(struct svc_serv *, struct net *);
-int		   svc_process(struct svc_rqst *);
-int		   bc_svc_process(struct svc_serv *, struct rpc_rqst *,
-			struct svc_rqst *);
-int		   svc_register(const struct svc_serv *, struct net *, const int,
-				const unsigned short, const unsigned short);
-
-void		   svc_wake_up(struct svc_serv *);
-void		   svc_reserve(struct svc_rqst *rqstp, int space);
-struct svc_pool *  svc_pool_for_cpu(struct svc_serv *serv, int cpu);
-char *		   svc_print_addr(struct svc_rqst *, char *, size_t);
-
-#define	RPC_MAX_ADDRBUFLEN	(63U)
-
-/*
- * When we want to reduce the size of the reserved space in the response
- * buffer, we need to take into account the size of any checksum data that
- * may be at the end of the packet. This is difficult to determine exactly
- * for all cases without actually generating the checksum, so we just use a
- * static value.
- */
-static inline void svc_reserve_auth(struct svc_rqst *rqstp, int space)
-{
-	int added_space = 0;
-
-	if (rqstp->rq_authop->flavour)
-		added_space = RPC_MAX_AUTH_SIZE;
-	svc_reserve(rqstp, space + added_space);
-}
-
-#endif /* SUNRPC_SVC_H */
diff --git a/ANDROID_3.4.5/include/linux/sunrpc/svc_rdma.h b/ANDROID_3.4.5/include/linux/sunrpc/svc_rdma.h
deleted file mode 100644
index 0b8e3e6b..00000000
--- a/ANDROID_3.4.5/include/linux/sunrpc/svc_rdma.h
+++ /dev/null
@@ -1,310 +0,0 @@
-/*
- * Copyright (c) 2005-2006 Network Appliance, Inc. All rights reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses.  You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the BSD-type
- * license below:
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- *      Redistributions of source code must retain the above copyright
- *      notice, this list of conditions and the following disclaimer.
- *
- *      Redistributions in binary form must reproduce the above
- *      copyright notice, this list of conditions and the following
- *      disclaimer in the documentation and/or other materials provided
- *      with the distribution.
- *
- *      Neither the name of the Network Appliance, Inc. nor the names of
- *      its contributors may be used to endorse or promote products
- *      derived from this software without specific prior written
- *      permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * Author: Tom Tucker <tom@opengridcomputing.com>
- */
-
-#ifndef SVC_RDMA_H
-#define SVC_RDMA_H
-#include <linux/sunrpc/xdr.h>
-#include <linux/sunrpc/svcsock.h>
-#include <linux/sunrpc/rpc_rdma.h>
-#include <rdma/ib_verbs.h>
-#include <rdma/rdma_cm.h>
-#define SVCRDMA_DEBUG
-
-/* RPC/RDMA parameters and stats */
-extern unsigned int svcrdma_ord;
-extern unsigned int svcrdma_max_requests;
-extern unsigned int svcrdma_max_req_size;
-
-extern atomic_t rdma_stat_recv;
-extern atomic_t rdma_stat_read;
-extern atomic_t rdma_stat_write;
-extern atomic_t rdma_stat_sq_starve;
-extern atomic_t rdma_stat_rq_starve;
-extern atomic_t rdma_stat_rq_poll;
-extern atomic_t rdma_stat_rq_prod;
-extern atomic_t rdma_stat_sq_poll;
-extern atomic_t rdma_stat_sq_prod;
-
-#define RPCRDMA_VERSION 1
-
-/*
- * Contexts are built when an RDMA request is created and are a
- * record of the resources that can be recovered when the request
- * completes.
- */
-struct svc_rdma_op_ctxt {
-	struct svc_rdma_op_ctxt *read_hdr;
-	struct svc_rdma_fastreg_mr *frmr;
-	int hdr_count;
-	struct xdr_buf arg;
-	struct list_head dto_q;
-	enum ib_wr_opcode wr_op;
-	enum ib_wc_status wc_status;
-	u32 byte_len;
-	struct svcxprt_rdma *xprt;
-	unsigned long flags;
-	enum dma_data_direction direction;
-	int count;
-	struct ib_sge sge[RPCSVC_MAXPAGES];
-	struct page *pages[RPCSVC_MAXPAGES];
-};
-
-/*
- * NFS_ requests are mapped on the client side by the chunk lists in
- * the RPCRDMA header. During the fetching of the RPC from the client
- * and the writing of the reply to the client, the memory in the
- * client and the memory in the server must be mapped as contiguous
- * vaddr/len for access by the hardware. These data strucures keep
- * these mappings.
- *
- * For an RDMA_WRITE, the 'sge' maps the RPC REPLY. For RDMA_READ, the
- * 'sge' in the svc_rdma_req_map maps the server side RPC reply and the
- * 'ch' field maps the read-list of the RPCRDMA header to the 'sge'
- * mapping of the reply.
- */
-struct svc_rdma_chunk_sge {
-	int start;		/* sge no for this chunk */
-	int count;		/* sge count for this chunk */
-};
-struct svc_rdma_fastreg_mr {
-	struct ib_mr *mr;
-	void *kva;
-	struct ib_fast_reg_page_list *page_list;
-	int page_list_len;
-	unsigned long access_flags;
-	unsigned long map_len;
-	enum dma_data_direction direction;
-	struct list_head frmr_list;
-};
-struct svc_rdma_req_map {
-	struct svc_rdma_fastreg_mr *frmr;
-	unsigned long count;
-	union {
-		struct kvec sge[RPCSVC_MAXPAGES];
-		struct svc_rdma_chunk_sge ch[RPCSVC_MAXPAGES];
-	};
-};
-#define RDMACTXT_F_FAST_UNREG	1
-#define RDMACTXT_F_LAST_CTXT	2
-
-#define	SVCRDMA_DEVCAP_FAST_REG		1	/* fast mr registration */
-#define	SVCRDMA_DEVCAP_READ_W_INV	2	/* read w/ invalidate */
-
-struct svcxprt_rdma {
-	struct svc_xprt      sc_xprt;		/* SVC transport structure */
-	struct rdma_cm_id    *sc_cm_id;		/* RDMA connection id */
-	struct list_head     sc_accept_q;	/* Conn. waiting accept */
-	int		     sc_ord;		/* RDMA read limit */
-	int                  sc_max_sge;
-
-	int                  sc_sq_depth;	/* Depth of SQ */
-	atomic_t             sc_sq_count;	/* Number of SQ WR on queue */
-
-	int                  sc_max_requests;	/* Depth of RQ */
-	int                  sc_max_req_size;	/* Size of each RQ WR buf */
-
-	struct ib_pd         *sc_pd;
-
-	atomic_t	     sc_dma_used;
-	atomic_t	     sc_ctxt_used;
-	struct list_head     sc_rq_dto_q;
-	spinlock_t	     sc_rq_dto_lock;
-	struct ib_qp         *sc_qp;
-	struct ib_cq         *sc_rq_cq;
-	struct ib_cq         *sc_sq_cq;
-	struct ib_mr         *sc_phys_mr;	/* MR for server memory */
-	u32		     sc_dev_caps;	/* distilled device caps */
-	u32		     sc_dma_lkey;	/* local dma key */
-	unsigned int	     sc_frmr_pg_list_len;
-	struct list_head     sc_frmr_q;
-	spinlock_t	     sc_frmr_q_lock;
-
-	spinlock_t	     sc_lock;		/* transport lock */
-
-	wait_queue_head_t    sc_send_wait;	/* SQ exhaustion waitlist */
-	unsigned long	     sc_flags;
-	struct list_head     sc_dto_q;		/* DTO tasklet I/O pending Q */
-	struct list_head     sc_read_complete_q;
-	struct work_struct   sc_work;
-};
-/* sc_flags */
-#define RDMAXPRT_RQ_PENDING	1
-#define RDMAXPRT_SQ_PENDING	2
-#define RDMAXPRT_CONN_PENDING	3
-
-#define RPCRDMA_LISTEN_BACKLOG  10
-/* The default ORD value is based on two outstanding full-size writes with a
- * page size of 4k, or 32k * 2 ops / 4k = 16 outstanding RDMA_READ.  */
-#define RPCRDMA_ORD             (64/4)
-#define RPCRDMA_SQ_DEPTH_MULT   8
-#define RPCRDMA_MAX_THREADS     16
-#define RPCRDMA_MAX_REQUESTS    16
-#define RPCRDMA_MAX_REQ_SIZE    4096
-
-/* svc_rdma_marshal.c */
-extern void svc_rdma_rcl_chunk_counts(struct rpcrdma_read_chunk *,
-				      int *, int *);
-extern int svc_rdma_xdr_decode_req(struct rpcrdma_msg **, struct svc_rqst *);
-extern int svc_rdma_xdr_decode_deferred_req(struct svc_rqst *);
-extern int svc_rdma_xdr_encode_error(struct svcxprt_rdma *,
-				     struct rpcrdma_msg *,
-				     enum rpcrdma_errcode, u32 *);
-extern void svc_rdma_xdr_encode_write_list(struct rpcrdma_msg *, int);
-extern void svc_rdma_xdr_encode_reply_array(struct rpcrdma_write_array *, int);
-extern void svc_rdma_xdr_encode_array_chunk(struct rpcrdma_write_array *, int,
-					    __be32, __be64, u32);
-extern void svc_rdma_xdr_encode_reply_header(struct svcxprt_rdma *,
-					     struct rpcrdma_msg *,
-					     struct rpcrdma_msg *,
-					     enum rpcrdma_proc);
-extern int svc_rdma_xdr_get_reply_hdr_len(struct rpcrdma_msg *);
-
-/* svc_rdma_recvfrom.c */
-extern int svc_rdma_recvfrom(struct svc_rqst *);
-
-/* svc_rdma_sendto.c */
-extern int svc_rdma_sendto(struct svc_rqst *);
-
-/* svc_rdma_transport.c */
-extern int svc_rdma_send(struct svcxprt_rdma *, struct ib_send_wr *);
-extern void svc_rdma_send_error(struct svcxprt_rdma *, struct rpcrdma_msg *,
-				enum rpcrdma_errcode);
-struct page *svc_rdma_get_page(void);
-extern int svc_rdma_post_recv(struct svcxprt_rdma *);
-extern int svc_rdma_create_listen(struct svc_serv *, int, struct sockaddr *);
-extern struct svc_rdma_op_ctxt *svc_rdma_get_context(struct svcxprt_rdma *);
-extern void svc_rdma_put_context(struct svc_rdma_op_ctxt *, int);
-extern void svc_rdma_unmap_dma(struct svc_rdma_op_ctxt *ctxt);
-extern struct svc_rdma_req_map *svc_rdma_get_req_map(void);
-extern void svc_rdma_put_req_map(struct svc_rdma_req_map *);
-extern int svc_rdma_fastreg(struct svcxprt_rdma *, struct svc_rdma_fastreg_mr *);
-extern struct svc_rdma_fastreg_mr *svc_rdma_get_frmr(struct svcxprt_rdma *);
-extern void svc_rdma_put_frmr(struct svcxprt_rdma *,
-			      struct svc_rdma_fastreg_mr *);
-extern void svc_sq_reap(struct svcxprt_rdma *);
-extern void svc_rq_reap(struct svcxprt_rdma *);
-extern struct svc_xprt_class svc_rdma_class;
-extern void svc_rdma_prep_reply_hdr(struct svc_rqst *);
-
-/* svc_rdma.c */
-extern int svc_rdma_init(void);
-extern void svc_rdma_cleanup(void);
-
-/*
- * Returns the address of the first read chunk or <nul> if no read chunk is
- * present
- */
-static inline struct rpcrdma_read_chunk *
-svc_rdma_get_read_chunk(struct rpcrdma_msg *rmsgp)
-{
-	struct rpcrdma_read_chunk *ch =
-		(struct rpcrdma_read_chunk *)&rmsgp->rm_body.rm_chunks[0];
-
-	if (ch->rc_discrim == 0)
-		return NULL;
-
-	return ch;
-}
-
-/*
- * Returns the address of the first read write array element or <nul> if no
- * write array list is present
- */
-static inline struct rpcrdma_write_array *
-svc_rdma_get_write_array(struct rpcrdma_msg *rmsgp)
-{
-	if (rmsgp->rm_body.rm_chunks[0] != 0
-	    || rmsgp->rm_body.rm_chunks[1] == 0)
-		return NULL;
-
-	return (struct rpcrdma_write_array *)&rmsgp->rm_body.rm_chunks[1];
-}
-
-/*
- * Returns the address of the first reply array element or <nul> if no
- * reply array is present
- */
-static inline struct rpcrdma_write_array *
-svc_rdma_get_reply_array(struct rpcrdma_msg *rmsgp)
-{
-	struct rpcrdma_read_chunk *rch;
-	struct rpcrdma_write_array *wr_ary;
-	struct rpcrdma_write_array *rp_ary;
-
-	/* XXX: Need to fix when reply list may occur with read-list and/or
-	 * write list */
-	if (rmsgp->rm_body.rm_chunks[0] != 0 ||
-	    rmsgp->rm_body.rm_chunks[1] != 0)
-		return NULL;
-
-	rch = svc_rdma_get_read_chunk(rmsgp);
-	if (rch) {
-		while (rch->rc_discrim)
-			rch++;
-
-		/* The reply list follows an empty write array located
-		 * at 'rc_position' here. The reply array is at rc_target.
-		 */
-		rp_ary = (struct rpcrdma_write_array *)&rch->rc_target;
-
-		goto found_it;
-	}
-
-	wr_ary = svc_rdma_get_write_array(rmsgp);
-	if (wr_ary) {
-		rp_ary = (struct rpcrdma_write_array *)
-			&wr_ary->
-			wc_array[ntohl(wr_ary->wc_nchunks)].wc_target.rs_length;
-
-		goto found_it;
-	}
-
-	/* No read list, no write list */
-	rp_ary = (struct rpcrdma_write_array *)
-		&rmsgp->rm_body.rm_chunks[2];
-
- found_it:
-	if (rp_ary->wc_discrim == 0)
-		return NULL;
-
-	return rp_ary;
-}
-#endif
diff --git a/ANDROID_3.4.5/include/linux/sunrpc/svc_xprt.h b/ANDROID_3.4.5/include/linux/sunrpc/svc_xprt.h
deleted file mode 100644
index b3f64b12..00000000
--- a/ANDROID_3.4.5/include/linux/sunrpc/svc_xprt.h
+++ /dev/null
@@ -1,208 +0,0 @@
-/*
- * linux/include/linux/sunrpc/svc_xprt.h
- *
- * RPC server transport I/O
- */
-
-#ifndef SUNRPC_SVC_XPRT_H
-#define SUNRPC_SVC_XPRT_H
-
-#include <linux/sunrpc/svc.h>
-
-struct module;
-
-struct svc_xprt_ops {
-	struct svc_xprt	*(*xpo_create)(struct svc_serv *,
-				       struct net *net,
-				       struct sockaddr *, int,
-				       int);
-	struct svc_xprt	*(*xpo_accept)(struct svc_xprt *);
-	int		(*xpo_has_wspace)(struct svc_xprt *);
-	int		(*xpo_recvfrom)(struct svc_rqst *);
-	void		(*xpo_prep_reply_hdr)(struct svc_rqst *);
-	int		(*xpo_sendto)(struct svc_rqst *);
-	void		(*xpo_release_rqst)(struct svc_rqst *);
-	void		(*xpo_detach)(struct svc_xprt *);
-	void		(*xpo_free)(struct svc_xprt *);
-};
-
-struct svc_xprt_class {
-	const char		*xcl_name;
-	struct module		*xcl_owner;
-	struct svc_xprt_ops	*xcl_ops;
-	struct list_head	xcl_list;
-	u32			xcl_max_payload;
-};
-
-/*
- * This is embedded in an object that wants a callback before deleting
- * an xprt; intended for use by NFSv4.1, which needs to know when a
- * client's tcp connection (and hence possibly a backchannel) goes away.
- */
-struct svc_xpt_user {
-	struct list_head list;
-	void (*callback)(struct svc_xpt_user *);
-};
-
-struct svc_xprt {
-	struct svc_xprt_class	*xpt_class;
-	struct svc_xprt_ops	*xpt_ops;
-	struct kref		xpt_ref;
-	struct list_head	xpt_list;
-	struct list_head	xpt_ready;
-	unsigned long		xpt_flags;
-#define	XPT_BUSY	0		/* enqueued/receiving */
-#define	XPT_CONN	1		/* conn pending */
-#define	XPT_CLOSE	2		/* dead or dying */
-#define	XPT_DATA	3		/* data pending */
-#define	XPT_TEMP	4		/* connected transport */
-#define	XPT_DEAD	6		/* transport closed */
-#define	XPT_CHNGBUF	7		/* need to change snd/rcv buf sizes */
-#define	XPT_DEFERRED	8		/* deferred request pending */
-#define	XPT_OLD		9		/* used for xprt aging mark+sweep */
-#define	XPT_DETACHED	10		/* detached from tempsocks list */
-#define XPT_LISTENER	11		/* listening endpoint */
-#define XPT_CACHE_AUTH	12		/* cache auth info */
-
-	struct svc_serv		*xpt_server;	/* service for transport */
-	atomic_t    	    	xpt_reserved;	/* space on outq that is rsvd */
-	struct mutex		xpt_mutex;	/* to serialize sending data */
-	spinlock_t		xpt_lock;	/* protects sk_deferred
-						 * and xpt_auth_cache */
-	void			*xpt_auth_cache;/* auth cache */
-	struct list_head	xpt_deferred;	/* deferred requests that need
-						 * to be revisted */
-	struct sockaddr_storage	xpt_local;	/* local address */
-	size_t			xpt_locallen;	/* length of address */
-	struct sockaddr_storage	xpt_remote;	/* remote peer's address */
-	size_t			xpt_remotelen;	/* length of address */
-	struct rpc_wait_queue	xpt_bc_pending;	/* backchannel wait queue */
-	struct list_head	xpt_users;	/* callbacks on free */
-
-	struct net		*xpt_net;
-	struct rpc_xprt		*xpt_bc_xprt;	/* NFSv4.1 backchannel */
-};
-
-static inline void unregister_xpt_user(struct svc_xprt *xpt, struct svc_xpt_user *u)
-{
-	spin_lock(&xpt->xpt_lock);
-	list_del_init(&u->list);
-	spin_unlock(&xpt->xpt_lock);
-}
-
-static inline int register_xpt_user(struct svc_xprt *xpt, struct svc_xpt_user *u)
-{
-	spin_lock(&xpt->xpt_lock);
-	if (test_bit(XPT_CLOSE, &xpt->xpt_flags)) {
-		/*
-		 * The connection is about to be deleted soon (or,
-		 * worse, may already be deleted--in which case we've
-		 * already notified the xpt_users).
-		 */
-		spin_unlock(&xpt->xpt_lock);
-		return -ENOTCONN;
-	}
-	list_add(&u->list, &xpt->xpt_users);
-	spin_unlock(&xpt->xpt_lock);
-	return 0;
-}
-
-int	svc_reg_xprt_class(struct svc_xprt_class *);
-void	svc_unreg_xprt_class(struct svc_xprt_class *);
-void	svc_xprt_init(struct net *, struct svc_xprt_class *, struct svc_xprt *,
-		      struct svc_serv *);
-int	svc_create_xprt(struct svc_serv *, const char *, struct net *,
-			const int, const unsigned short, int);
-void	svc_xprt_enqueue(struct svc_xprt *xprt);
-void	svc_xprt_received(struct svc_xprt *);
-void	svc_xprt_put(struct svc_xprt *xprt);
-void	svc_xprt_copy_addrs(struct svc_rqst *rqstp, struct svc_xprt *xprt);
-void	svc_close_xprt(struct svc_xprt *xprt);
-int	svc_port_is_privileged(struct sockaddr *sin);
-int	svc_print_xprts(char *buf, int maxlen);
-struct	svc_xprt *svc_find_xprt(struct svc_serv *serv, const char *xcl_name,
-			struct net *net, const sa_family_t af,
-			const unsigned short port);
-int	svc_xprt_names(struct svc_serv *serv, char *buf, const int buflen);
-
-static inline void svc_xprt_get(struct svc_xprt *xprt)
-{
-	kref_get(&xprt->xpt_ref);
-}
-static inline void svc_xprt_set_local(struct svc_xprt *xprt,
-				      const struct sockaddr *sa,
-				      const size_t salen)
-{
-	memcpy(&xprt->xpt_local, sa, salen);
-	xprt->xpt_locallen = salen;
-}
-static inline void svc_xprt_set_remote(struct svc_xprt *xprt,
-				       const struct sockaddr *sa,
-				       const size_t salen)
-{
-	memcpy(&xprt->xpt_remote, sa, salen);
-	xprt->xpt_remotelen = salen;
-}
-static inline unsigned short svc_addr_port(const struct sockaddr *sa)
-{
-	const struct sockaddr_in *sin = (const struct sockaddr_in *)sa;
-	const struct sockaddr_in6 *sin6 = (const struct sockaddr_in6 *)sa;
-
-	switch (sa->sa_family) {
-	case AF_INET:
-		return ntohs(sin->sin_port);
-	case AF_INET6:
-		return ntohs(sin6->sin6_port);
-	}
-
-	return 0;
-}
-
-static inline size_t svc_addr_len(const struct sockaddr *sa)
-{
-	switch (sa->sa_family) {
-	case AF_INET:
-		return sizeof(struct sockaddr_in);
-	case AF_INET6:
-		return sizeof(struct sockaddr_in6);
-	}
-
-	return 0;
-}
-
-static inline unsigned short svc_xprt_local_port(const struct svc_xprt *xprt)
-{
-	return svc_addr_port((const struct sockaddr *)&xprt->xpt_local);
-}
-
-static inline unsigned short svc_xprt_remote_port(const struct svc_xprt *xprt)
-{
-	return svc_addr_port((const struct sockaddr *)&xprt->xpt_remote);
-}
-
-static inline char *__svc_print_addr(const struct sockaddr *addr,
-				     char *buf, const size_t len)
-{
-	const struct sockaddr_in *sin = (const struct sockaddr_in *)addr;
-	const struct sockaddr_in6 *sin6 = (const struct sockaddr_in6 *)addr;
-
-	switch (addr->sa_family) {
-	case AF_INET:
-		snprintf(buf, len, "%pI4, port=%u", &sin->sin_addr,
-			ntohs(sin->sin_port));
-		break;
-
-	case AF_INET6:
-		snprintf(buf, len, "%pI6, port=%u",
-			 &sin6->sin6_addr,
-			ntohs(sin6->sin6_port));
-		break;
-
-	default:
-		snprintf(buf, len, "unknown address type: %d", addr->sa_family);
-		break;
-	}
-
-	return buf;
-}
-#endif /* SUNRPC_SVC_XPRT_H */
diff --git a/ANDROID_3.4.5/include/linux/sunrpc/svcauth.h b/ANDROID_3.4.5/include/linux/sunrpc/svcauth.h
deleted file mode 100644
index 548790e9..00000000
--- a/ANDROID_3.4.5/include/linux/sunrpc/svcauth.h
+++ /dev/null
@@ -1,180 +0,0 @@
-/*
- * linux/include/linux/sunrpc/svcauth.h
- *
- * RPC server-side authentication stuff.
- *
- * Copyright (C) 1995, 1996 Olaf Kirch <okir@monad.swb.de>
- */
-
-#ifndef _LINUX_SUNRPC_SVCAUTH_H_
-#define _LINUX_SUNRPC_SVCAUTH_H_
-
-#ifdef __KERNEL__
-
-#include <linux/string.h>
-#include <linux/sunrpc/msg_prot.h>
-#include <linux/sunrpc/cache.h>
-#include <linux/hash.h>
-
-#define SVC_CRED_NGROUPS	32
-struct svc_cred {
-	uid_t			cr_uid;
-	gid_t			cr_gid;
-	struct group_info	*cr_group_info;
-};
-
-struct svc_rqst;		/* forward decl */
-struct in6_addr;
-
-/* Authentication is done in the context of a domain.
- *
- * Currently, the nfs server uses the auth_domain to stand
- * for the "client" listed in /etc/exports.
- *
- * More generally, a domain might represent a group of clients using
- * a common mechanism for authentication and having a common mapping
- * between local identity (uid) and network identity.  All clients
- * in a domain have similar general access rights.  Each domain can
- * contain multiple principals which will have different specific right
- * based on normal Discretionary Access Control.
- *
- * A domain is created by an authentication flavour module based on name
- * only.  Userspace then fills in detail on demand.
- *
- * In the case of auth_unix and auth_null, the auth_domain is also
- * associated with entries in another cache representing the mapping
- * of ip addresses to the given client.
- */
-struct auth_domain {
-	struct kref		ref;
-	struct hlist_node	hash;
-	char			*name;
-	struct auth_ops		*flavour;
-};
-
-/*
- * Each authentication flavour registers an auth_ops
- * structure.
- * name is simply the name.
- * flavour gives the auth flavour. It determines where the flavour is registered
- * accept() is given a request and should verify it.
- *   It should inspect the authenticator and verifier, and possibly the data.
- *    If there is a problem with the authentication *authp should be set.
- *    The return value of accept() can indicate:
- *      OK - authorised. client and credential are set in rqstp.
- *           reqbuf points to arguments
- *           resbuf points to good place for results.  verfier
- *             is (probably) already in place.  Certainly space is
- *	       reserved for it.
- *      DROP - simply drop the request. It may have been deferred
- *      GARBAGE - rpc garbage_args error
- *      SYSERR - rpc system_err error
- *      DENIED - authp holds reason for denial.
- *      COMPLETE - the reply is encoded already and ready to be sent; no
- *		further processing is necessary.  (This is used for processing
- *		null procedure calls which are used to set up encryption
- *		contexts.)
- *
- *   accept is passed the proc number so that it can accept NULL rpc requests
- *   even if it cannot authenticate the client (as is sometimes appropriate).
- *
- * release() is given a request after the procedure has been run.
- *  It should sign/encrypt the results if needed
- * It should return:
- *    OK - the resbuf is ready to be sent
- *    DROP - the reply should be quitely dropped
- *    DENIED - authp holds a reason for MSG_DENIED
- *    SYSERR - rpc system_err
- *
- * domain_release()
- *   This call releases a domain.
- * set_client()
- *   Givens a pending request (struct svc_rqst), finds and assigns
- *   an appropriate 'auth_domain' as the client.
- */
-struct auth_ops {
-	char *	name;
-	struct module *owner;
-	int	flavour;
-	int	(*accept)(struct svc_rqst *rq, __be32 *authp);
-	int	(*release)(struct svc_rqst *rq);
-	void	(*domain_release)(struct auth_domain *);
-	int	(*set_client)(struct svc_rqst *rq);
-};
-
-#define	SVC_GARBAGE	1
-#define	SVC_SYSERR	2
-#define	SVC_VALID	3
-#define	SVC_NEGATIVE	4
-#define	SVC_OK		5
-#define	SVC_DROP	6
-#define	SVC_CLOSE	7	/* Like SVC_DROP, but request is definitely
-				 * lost so if there is a tcp connection, it
-				 * should be closed
-				 */
-#define	SVC_DENIED	8
-#define	SVC_PENDING	9
-#define	SVC_COMPLETE	10
-
-struct svc_xprt;
-
-extern int	svc_authenticate(struct svc_rqst *rqstp, __be32 *authp);
-extern int	svc_authorise(struct svc_rqst *rqstp);
-extern int	svc_set_client(struct svc_rqst *rqstp);
-extern int	svc_auth_register(rpc_authflavor_t flavor, struct auth_ops *aops);
-extern void	svc_auth_unregister(rpc_authflavor_t flavor);
-
-extern struct auth_domain *unix_domain_find(char *name);
-extern void auth_domain_put(struct auth_domain *item);
-extern int auth_unix_add_addr(struct net *net, struct in6_addr *addr, struct auth_domain *dom);
-extern struct auth_domain *auth_domain_lookup(char *name, struct auth_domain *new);
-extern struct auth_domain *auth_domain_find(char *name);
-extern struct auth_domain *auth_unix_lookup(struct net *net, struct in6_addr *addr);
-extern int auth_unix_forget_old(struct auth_domain *dom);
-extern void svcauth_unix_purge(void);
-extern void svcauth_unix_info_release(struct svc_xprt *xpt);
-extern int svcauth_unix_set_client(struct svc_rqst *rqstp);
-
-extern int unix_gid_cache_create(struct net *net);
-extern void unix_gid_cache_destroy(struct net *net);
-
-static inline unsigned long hash_str(char *name, int bits)
-{
-	unsigned long hash = 0;
-	unsigned long l = 0;
-	int len = 0;
-	unsigned char c;
-	do {
-		if (unlikely(!(c = *name++))) {
-			c = (char)len; len = -1;
-		}
-		l = (l << 8) | c;
-		len++;
-		if ((len & (BITS_PER_LONG/8-1))==0)
-			hash = hash_long(hash^l, BITS_PER_LONG);
-	} while (len);
-	return hash >> (BITS_PER_LONG - bits);
-}
-
-static inline unsigned long hash_mem(char *buf, int length, int bits)
-{
-	unsigned long hash = 0;
-	unsigned long l = 0;
-	int len = 0;
-	unsigned char c;
-	do {
-		if (len == length) {
-			c = (char)len; len = -1;
-		} else
-			c = *buf++;
-		l = (l << 8) | c;
-		len++;
-		if ((len & (BITS_PER_LONG/8-1))==0)
-			hash = hash_long(hash^l, BITS_PER_LONG);
-	} while (len);
-	return hash >> (BITS_PER_LONG - bits);
-}
-
-#endif /* __KERNEL__ */
-
-#endif /* _LINUX_SUNRPC_SVCAUTH_H_ */
diff --git a/ANDROID_3.4.5/include/linux/sunrpc/svcauth_gss.h b/ANDROID_3.4.5/include/linux/sunrpc/svcauth_gss.h
deleted file mode 100644
index 7c32daa0..00000000
--- a/ANDROID_3.4.5/include/linux/sunrpc/svcauth_gss.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * linux/include/linux/sunrpc/svcauth_gss.h
- *
- * Bruce Fields <bfields@umich.edu>
- * Copyright (c) 2002 The Regents of the University of Michigan
- */
-
-#ifndef _LINUX_SUNRPC_SVCAUTH_GSS_H
-#define _LINUX_SUNRPC_SVCAUTH_GSS_H
-
-#ifdef __KERNEL__
-#include <linux/sched.h>
-#include <linux/sunrpc/types.h>
-#include <linux/sunrpc/xdr.h>
-#include <linux/sunrpc/svcauth.h>
-#include <linux/sunrpc/svcsock.h>
-#include <linux/sunrpc/auth_gss.h>
-
-int gss_svc_init(void);
-void gss_svc_shutdown(void);
-int gss_svc_init_net(struct net *net);
-void gss_svc_shutdown_net(struct net *net);
-int svcauth_gss_register_pseudoflavor(u32 pseudoflavor, char * name);
-u32 svcauth_gss_flavor(struct auth_domain *dom);
-char *svc_gss_principal(struct svc_rqst *);
-
-#endif /* __KERNEL__ */
-#endif /* _LINUX_SUNRPC_SVCAUTH_GSS_H */
diff --git a/ANDROID_3.4.5/include/linux/sunrpc/svcsock.h b/ANDROID_3.4.5/include/linux/sunrpc/svcsock.h
deleted file mode 100644
index cb4ac69e..00000000
--- a/ANDROID_3.4.5/include/linux/sunrpc/svcsock.h
+++ /dev/null
@@ -1,59 +0,0 @@
-/*
- * linux/include/linux/sunrpc/svcsock.h
- *
- * RPC server socket I/O.
- *
- * Copyright (C) 1995, 1996 Olaf Kirch <okir@monad.swb.de>
- */
-
-#ifndef SUNRPC_SVCSOCK_H
-#define SUNRPC_SVCSOCK_H
-
-#include <linux/sunrpc/svc.h>
-#include <linux/sunrpc/svc_xprt.h>
-
-/*
- * RPC server socket.
- */
-struct svc_sock {
-	struct svc_xprt		sk_xprt;
-	struct socket *		sk_sock;	/* berkeley socket layer */
-	struct sock *		sk_sk;		/* INET layer */
-
-	/* We keep the old state_change and data_ready CB's here */
-	void			(*sk_ostate)(struct sock *);
-	void			(*sk_odata)(struct sock *, int bytes);
-	void			(*sk_owspace)(struct sock *);
-
-	/* private TCP part */
-	u32			sk_reclen;	/* length of record */
-	u32			sk_tcplen;	/* current read length */
-	struct page *		sk_pages[RPCSVC_MAXPAGES];	/* received data */
-};
-
-/*
- * Function prototypes.
- */
-void		svc_close_net(struct svc_serv *, struct net *);
-int		svc_recv(struct svc_rqst *, long);
-int		svc_send(struct svc_rqst *);
-void		svc_drop(struct svc_rqst *);
-void		svc_sock_update_bufs(struct svc_serv *serv);
-int		svc_sock_names(struct svc_serv *serv, char *buf,
-					const size_t buflen,
-					const char *toclose);
-int		svc_addsock(struct svc_serv *serv, const int fd,
-					char *name_return, const size_t len);
-void		svc_init_xprt_sock(void);
-void		svc_cleanup_xprt_sock(void);
-struct svc_xprt *svc_sock_create(struct svc_serv *serv, int prot);
-void		svc_sock_destroy(struct svc_xprt *);
-
-/*
- * svc_makesock socket characteristics
- */
-#define SVC_SOCK_DEFAULTS	(0U)
-#define SVC_SOCK_ANONYMOUS	(1U << 0)	/* don't register with pmap */
-#define SVC_SOCK_TEMPORARY	(1U << 1)	/* flag socket as temporary */
-
-#endif /* SUNRPC_SVCSOCK_H */
diff --git a/ANDROID_3.4.5/include/linux/sunrpc/timer.h b/ANDROID_3.4.5/include/linux/sunrpc/timer.h
deleted file mode 100644
index 697d6e69..00000000
--- a/ANDROID_3.4.5/include/linux/sunrpc/timer.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- *  linux/include/linux/sunrpc/timer.h
- *
- *  Declarations for the RPC transport timer.
- *
- *  Copyright (C) 2002 Trond Myklebust <trond.myklebust@fys.uio.no>
- */
-
-#ifndef _LINUX_SUNRPC_TIMER_H
-#define _LINUX_SUNRPC_TIMER_H
-
-#include <linux/atomic.h>
-
-struct rpc_rtt {
-	unsigned long timeo;	/* default timeout value */
-	unsigned long srtt[5];	/* smoothed round trip time << 3 */
-	unsigned long sdrtt[5];	/* smoothed medium deviation of RTT */
-	int ntimeouts[5];	/* Number of timeouts for the last request */
-};
-
-
-extern void rpc_init_rtt(struct rpc_rtt *rt, unsigned long timeo);
-extern void rpc_update_rtt(struct rpc_rtt *rt, unsigned timer, long m);
-extern unsigned long rpc_calc_rto(struct rpc_rtt *rt, unsigned timer);
-
-static inline void rpc_set_timeo(struct rpc_rtt *rt, int timer, int ntimeo)
-{
-	int *t;
-	if (!timer)
-		return;
-	t = &rt->ntimeouts[timer-1];
-	if (ntimeo < *t) {
-		if (*t > 0)
-			(*t)--;
-	} else {
-		if (ntimeo > 8)
-			ntimeo = 8;
-		*t = ntimeo;
-	}
-}
-
-static inline int rpc_ntimeo(struct rpc_rtt *rt, int timer)
-{
-	if (!timer)
-		return 0;
-	return rt->ntimeouts[timer-1];
-}
-
-#endif /* _LINUX_SUNRPC_TIMER_H */
diff --git a/ANDROID_3.4.5/include/linux/sunrpc/types.h b/ANDROID_3.4.5/include/linux/sunrpc/types.h
deleted file mode 100644
index d222f475..00000000
--- a/ANDROID_3.4.5/include/linux/sunrpc/types.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * linux/include/linux/sunrpc/types.h
- *
- * Generic types and misc stuff for RPC.
- *
- * Copyright (C) 1996, Olaf Kirch <okir@monad.swb.de>
- */
-
-#ifndef _LINUX_SUNRPC_TYPES_H_
-#define _LINUX_SUNRPC_TYPES_H_
-
-#include <linux/timer.h>
-#include <linux/workqueue.h>
-#include <linux/sunrpc/debug.h>
-#include <linux/list.h>
-
-/*
- * Shorthands
- */
-#define signalled()		(signal_pending(current))
-
-#endif /* _LINUX_SUNRPC_TYPES_H_ */
diff --git a/ANDROID_3.4.5/include/linux/sunrpc/xdr.h b/ANDROID_3.4.5/include/linux/sunrpc/xdr.h
deleted file mode 100644
index af70af33..00000000
--- a/ANDROID_3.4.5/include/linux/sunrpc/xdr.h
+++ /dev/null
@@ -1,231 +0,0 @@
-/*
- * XDR standard data types and function declarations
- *
- * Copyright (C) 1995-1997 Olaf Kirch <okir@monad.swb.de>
- *
- * Based on:
- *   RFC 4506 "XDR: External Data Representation Standard", May 2006
- */
-
-#ifndef _SUNRPC_XDR_H_
-#define _SUNRPC_XDR_H_
-
-#ifdef __KERNEL__
-
-#include <linux/uio.h>
-#include <asm/byteorder.h>
-#include <asm/unaligned.h>
-#include <linux/scatterlist.h>
-
-/*
- * Buffer adjustment
- */
-#define XDR_QUADLEN(l)		(((l) + 3) >> 2)
-
-/*
- * Generic opaque `network object.' At the kernel level, this type
- * is used only by lockd.
- */
-#define XDR_MAX_NETOBJ		1024
-struct xdr_netobj {
-	unsigned int		len;
-	u8 *			data;
-};
-
-/*
- * This is the legacy generic XDR function. rqstp is either a rpc_rqst
- * (client side) or svc_rqst pointer (server side).
- * Encode functions always assume there's enough room in the buffer.
- */
-typedef int	(*kxdrproc_t)(void *rqstp, __be32 *data, void *obj);
-
-/*
- * Basic structure for transmission/reception of a client XDR message.
- * Features a header (for a linear buffer containing RPC headers
- * and the data payload for short messages), and then an array of
- * pages.
- * The tail iovec allows you to append data after the page array. Its
- * main interest is for appending padding to the pages in order to
- * satisfy the int_32-alignment requirements in RFC1832.
- *
- * For the future, we might want to string several of these together
- * in a list if anybody wants to make use of NFSv4 COMPOUND
- * operations and/or has a need for scatter/gather involving pages.
- */
-struct xdr_buf {
-	struct kvec	head[1],	/* RPC header + non-page data */
-			tail[1];	/* Appended after page data */
-
-	struct page **	pages;		/* Array of contiguous pages */
-	unsigned int	page_base,	/* Start of page data */
-			page_len,	/* Length of page data */
-			flags;		/* Flags for data disposition */
-#define XDRBUF_READ		0x01		/* target of file read */
-#define XDRBUF_WRITE		0x02		/* source of file write */
-
-	unsigned int	buflen,		/* Total length of storage buffer */
-			len;		/* Length of XDR encoded message */
-};
-
-/*
- * pre-xdr'ed macros.
- */
-
-#define	xdr_zero	cpu_to_be32(0)
-#define	xdr_one		cpu_to_be32(1)
-#define	xdr_two		cpu_to_be32(2)
-
-#define	rpc_success		cpu_to_be32(RPC_SUCCESS)
-#define	rpc_prog_unavail	cpu_to_be32(RPC_PROG_UNAVAIL)
-#define	rpc_prog_mismatch	cpu_to_be32(RPC_PROG_MISMATCH)
-#define	rpc_proc_unavail	cpu_to_be32(RPC_PROC_UNAVAIL)
-#define	rpc_garbage_args	cpu_to_be32(RPC_GARBAGE_ARGS)
-#define	rpc_system_err		cpu_to_be32(RPC_SYSTEM_ERR)
-#define	rpc_drop_reply		cpu_to_be32(RPC_DROP_REPLY)
-
-#define	rpc_auth_ok		cpu_to_be32(RPC_AUTH_OK)
-#define	rpc_autherr_badcred	cpu_to_be32(RPC_AUTH_BADCRED)
-#define	rpc_autherr_rejectedcred cpu_to_be32(RPC_AUTH_REJECTEDCRED)
-#define	rpc_autherr_badverf	cpu_to_be32(RPC_AUTH_BADVERF)
-#define	rpc_autherr_rejectedverf cpu_to_be32(RPC_AUTH_REJECTEDVERF)
-#define	rpc_autherr_tooweak	cpu_to_be32(RPC_AUTH_TOOWEAK)
-#define	rpcsec_gsserr_credproblem	cpu_to_be32(RPCSEC_GSS_CREDPROBLEM)
-#define	rpcsec_gsserr_ctxproblem	cpu_to_be32(RPCSEC_GSS_CTXPROBLEM)
-#define	rpc_autherr_oldseqnum	cpu_to_be32(101)
-
-/*
- * Miscellaneous XDR helper functions
- */
-__be32 *xdr_encode_opaque_fixed(__be32 *p, const void *ptr, unsigned int len);
-__be32 *xdr_encode_opaque(__be32 *p, const void *ptr, unsigned int len);
-__be32 *xdr_encode_string(__be32 *p, const char *s);
-__be32 *xdr_decode_string_inplace(__be32 *p, char **sp, unsigned int *lenp,
-			unsigned int maxlen);
-__be32 *xdr_encode_netobj(__be32 *p, const struct xdr_netobj *);
-__be32 *xdr_decode_netobj(__be32 *p, struct xdr_netobj *);
-
-void	xdr_encode_pages(struct xdr_buf *, struct page **, unsigned int,
-			 unsigned int);
-void	xdr_inline_pages(struct xdr_buf *, unsigned int,
-			 struct page **, unsigned int, unsigned int);
-void	xdr_terminate_string(struct xdr_buf *, const u32);
-
-static inline __be32 *xdr_encode_array(__be32 *p, const void *s, unsigned int len)
-{
-	return xdr_encode_opaque(p, s, len);
-}
-
-/*
- * Decode 64bit quantities (NFSv3 support)
- */
-static inline __be32 *
-xdr_encode_hyper(__be32 *p, __u64 val)
-{
-	put_unaligned_be64(val, p);
-	return p + 2;
-}
-
-static inline __be32 *
-xdr_decode_hyper(__be32 *p, __u64 *valp)
-{
-	*valp = get_unaligned_be64(p);
-	return p + 2;
-}
-
-static inline __be32 *
-xdr_decode_opaque_fixed(__be32 *p, void *ptr, unsigned int len)
-{
-	memcpy(ptr, p, len);
-	return p + XDR_QUADLEN(len);
-}
-
-/*
- * Adjust kvec to reflect end of xdr'ed data (RPC client XDR)
- */
-static inline int
-xdr_adjust_iovec(struct kvec *iov, __be32 *p)
-{
-	return iov->iov_len = ((u8 *) p - (u8 *) iov->iov_base);
-}
-
-/*
- * XDR buffer helper functions
- */
-extern void xdr_shift_buf(struct xdr_buf *, size_t);
-extern void xdr_buf_from_iov(struct kvec *, struct xdr_buf *);
-extern int xdr_buf_subsegment(struct xdr_buf *, struct xdr_buf *, unsigned int, unsigned int);
-extern int xdr_buf_read_netobj(struct xdr_buf *, struct xdr_netobj *, unsigned int);
-extern int read_bytes_from_xdr_buf(struct xdr_buf *, unsigned int, void *, unsigned int);
-extern int write_bytes_to_xdr_buf(struct xdr_buf *, unsigned int, void *, unsigned int);
-
-/*
- * Helper structure for copying from an sk_buff.
- */
-struct xdr_skb_reader {
-	struct sk_buff	*skb;
-	unsigned int	offset;
-	size_t		count;
-	__wsum		csum;
-};
-
-typedef size_t (*xdr_skb_read_actor)(struct xdr_skb_reader *desc, void *to, size_t len);
-
-size_t xdr_skb_read_bits(struct xdr_skb_reader *desc, void *to, size_t len);
-extern int csum_partial_copy_to_xdr(struct xdr_buf *, struct sk_buff *);
-extern ssize_t xdr_partial_copy_from_skb(struct xdr_buf *, unsigned int,
-		struct xdr_skb_reader *, xdr_skb_read_actor);
-
-extern int xdr_encode_word(struct xdr_buf *, unsigned int, u32);
-extern int xdr_decode_word(struct xdr_buf *, unsigned int, u32 *);
-
-struct xdr_array2_desc;
-typedef int (*xdr_xcode_elem_t)(struct xdr_array2_desc *desc, void *elem);
-struct xdr_array2_desc {
-	unsigned int elem_size;
-	unsigned int array_len;
-	unsigned int array_maxlen;
-	xdr_xcode_elem_t xcode;
-};
-
-extern int xdr_decode_array2(struct xdr_buf *buf, unsigned int base,
-			     struct xdr_array2_desc *desc);
-extern int xdr_encode_array2(struct xdr_buf *buf, unsigned int base,
-			     struct xdr_array2_desc *desc);
-extern void _copy_from_pages(char *p, struct page **pages, size_t pgbase,
-			     size_t len);
-
-/*
- * Provide some simple tools for XDR buffer overflow-checking etc.
- */
-struct xdr_stream {
-	__be32 *p;		/* start of available buffer */
-	struct xdr_buf *buf;	/* XDR buffer to read/write */
-
-	__be32 *end;		/* end of available buffer space */
-	struct kvec *iov;	/* pointer to the current kvec */
-	struct kvec scratch;	/* Scratch buffer */
-	struct page **page_ptr;	/* pointer to the current page */
-};
-
-/*
- * These are the xdr_stream style generic XDR encode and decode functions.
- */
-typedef void	(*kxdreproc_t)(void *rqstp, struct xdr_stream *xdr, void *obj);
-typedef int	(*kxdrdproc_t)(void *rqstp, struct xdr_stream *xdr, void *obj);
-
-extern void xdr_init_encode(struct xdr_stream *xdr, struct xdr_buf *buf, __be32 *p);
-extern __be32 *xdr_reserve_space(struct xdr_stream *xdr, size_t nbytes);
-extern void xdr_write_pages(struct xdr_stream *xdr, struct page **pages,
-		unsigned int base, unsigned int len);
-extern void xdr_init_decode(struct xdr_stream *xdr, struct xdr_buf *buf, __be32 *p);
-extern void xdr_init_decode_pages(struct xdr_stream *xdr, struct xdr_buf *buf,
-		struct page **pages, unsigned int len);
-extern void xdr_set_scratch_buffer(struct xdr_stream *xdr, void *buf, size_t buflen);
-extern __be32 *xdr_inline_decode(struct xdr_stream *xdr, size_t nbytes);
-extern void xdr_read_pages(struct xdr_stream *xdr, unsigned int len);
-extern void xdr_enter_page(struct xdr_stream *xdr, unsigned int len);
-extern int xdr_process_buf(struct xdr_buf *buf, unsigned int offset, unsigned int len, int (*actor)(struct scatterlist *, void *), void *data);
-
-#endif /* __KERNEL__ */
-
-#endif /* _SUNRPC_XDR_H_ */
diff --git a/ANDROID_3.4.5/include/linux/sunrpc/xprt.h b/ANDROID_3.4.5/include/linux/sunrpc/xprt.h
deleted file mode 100644
index 77d278de..00000000
--- a/ANDROID_3.4.5/include/linux/sunrpc/xprt.h
+++ /dev/null
@@ -1,404 +0,0 @@
-/*
- *  linux/include/linux/sunrpc/xprt.h
- *
- *  Declarations for the RPC transport interface.
- *
- *  Copyright (C) 1995, 1996 Olaf Kirch <okir@monad.swb.de>
- */
-
-#ifndef _LINUX_SUNRPC_XPRT_H
-#define _LINUX_SUNRPC_XPRT_H
-
-#include <linux/uio.h>
-#include <linux/socket.h>
-#include <linux/in.h>
-#include <linux/ktime.h>
-#include <linux/sunrpc/sched.h>
-#include <linux/sunrpc/xdr.h>
-#include <linux/sunrpc/msg_prot.h>
-
-#ifdef __KERNEL__
-
-#define RPC_MIN_SLOT_TABLE	(2U)
-#define RPC_DEF_SLOT_TABLE	(16U)
-#define RPC_MAX_SLOT_TABLE_LIMIT	(65536U)
-#define RPC_MAX_SLOT_TABLE	RPC_MAX_SLOT_TABLE_LIMIT
-
-/*
- * This describes a timeout strategy
- */
-struct rpc_timeout {
-	unsigned long		to_initval,		/* initial timeout */
-				to_maxval,		/* max timeout */
-				to_increment;		/* if !exponential */
-	unsigned int		to_retries;		/* max # of retries */
-	unsigned char		to_exponential;
-};
-
-enum rpc_display_format_t {
-	RPC_DISPLAY_ADDR = 0,
-	RPC_DISPLAY_PORT,
-	RPC_DISPLAY_PROTO,
-	RPC_DISPLAY_HEX_ADDR,
-	RPC_DISPLAY_HEX_PORT,
-	RPC_DISPLAY_NETID,
-	RPC_DISPLAY_MAX,
-};
-
-struct rpc_task;
-struct rpc_xprt;
-struct seq_file;
-
-/*
- * This describes a complete RPC request
- */
-struct rpc_rqst {
-	/*
-	 * This is the user-visible part
-	 */
-	struct rpc_xprt *	rq_xprt;		/* RPC client */
-	struct xdr_buf		rq_snd_buf;		/* send buffer */
-	struct xdr_buf		rq_rcv_buf;		/* recv buffer */
-
-	/*
-	 * This is the private part
-	 */
-	struct rpc_task *	rq_task;	/* RPC task data */
-	struct rpc_cred *	rq_cred;	/* Bound cred */
-	__be32			rq_xid;		/* request XID */
-	int			rq_cong;	/* has incremented xprt->cong */
-	u32			rq_seqno;	/* gss seq no. used on req. */
-	int			rq_enc_pages_num;
-	struct page		**rq_enc_pages;	/* scratch pages for use by
-						   gss privacy code */
-	void (*rq_release_snd_buf)(struct rpc_rqst *); /* release rq_enc_pages */
-	struct list_head	rq_list;
-
-	__u32 *			rq_buffer;	/* XDR encode buffer */
-	size_t			rq_callsize,
-				rq_rcvsize;
-	size_t			rq_xmit_bytes_sent;	/* total bytes sent */
-	size_t			rq_reply_bytes_recvd;	/* total reply bytes */
-							/* received */
-
-	struct xdr_buf		rq_private_buf;		/* The receive buffer
-							 * used in the softirq.
-							 */
-	unsigned long		rq_majortimeo;	/* major timeout alarm */
-	unsigned long		rq_timeout;	/* Current timeout value */
-	ktime_t			rq_rtt;		/* round-trip time */
-	unsigned int		rq_retries;	/* # of retries */
-	unsigned int		rq_connect_cookie;
-						/* A cookie used to track the
-						   state of the transport
-						   connection */
-	
-	/*
-	 * Partial send handling
-	 */
-	u32			rq_bytes_sent;	/* Bytes we have sent */
-
-	ktime_t			rq_xtime;	/* transmit time stamp */
-	int			rq_ntrans;
-
-#if defined(CONFIG_SUNRPC_BACKCHANNEL)
-	struct list_head	rq_bc_list;	/* Callback service list */
-	unsigned long		rq_bc_pa_state;	/* Backchannel prealloc state */
-	struct list_head	rq_bc_pa_list;	/* Backchannel prealloc list */
-#endif /* CONFIG_SUNRPC_BACKCHANEL */
-};
-#define rq_svec			rq_snd_buf.head
-#define rq_slen			rq_snd_buf.len
-
-struct rpc_xprt_ops {
-	void		(*set_buffer_size)(struct rpc_xprt *xprt, size_t sndsize, size_t rcvsize);
-	int		(*reserve_xprt)(struct rpc_xprt *xprt, struct rpc_task *task);
-	void		(*release_xprt)(struct rpc_xprt *xprt, struct rpc_task *task);
-	void		(*rpcbind)(struct rpc_task *task);
-	void		(*set_port)(struct rpc_xprt *xprt, unsigned short port);
-	void		(*connect)(struct rpc_task *task);
-	void *		(*buf_alloc)(struct rpc_task *task, size_t size);
-	void		(*buf_free)(void *buffer);
-	int		(*send_request)(struct rpc_task *task);
-	void		(*set_retrans_timeout)(struct rpc_task *task);
-	void		(*timer)(struct rpc_task *task);
-	void		(*release_request)(struct rpc_task *task);
-	void		(*close)(struct rpc_xprt *xprt);
-	void		(*destroy)(struct rpc_xprt *xprt);
-	void		(*print_stats)(struct rpc_xprt *xprt, struct seq_file *seq);
-};
-
-/*
- * RPC transport identifiers
- *
- * To preserve compatibility with the historical use of raw IP protocol
- * id's for transport selection, UDP and TCP identifiers are specified
- * with the previous values. No such restriction exists for new transports,
- * except that they may not collide with these values (17 and 6,
- * respectively).
- */
-#define XPRT_TRANSPORT_BC       (1 << 31)
-enum xprt_transports {
-	XPRT_TRANSPORT_UDP	= IPPROTO_UDP,
-	XPRT_TRANSPORT_TCP	= IPPROTO_TCP,
-	XPRT_TRANSPORT_BC_TCP	= IPPROTO_TCP | XPRT_TRANSPORT_BC,
-	XPRT_TRANSPORT_RDMA	= 256,
-	XPRT_TRANSPORT_LOCAL	= 257,
-};
-
-struct rpc_xprt {
-	atomic_t		count;		/* Reference count */
-	struct rpc_xprt_ops *	ops;		/* transport methods */
-
-	const struct rpc_timeout *timeout;	/* timeout parms */
-	struct sockaddr_storage	addr;		/* server address */
-	size_t			addrlen;	/* size of server address */
-	int			prot;		/* IP protocol */
-
-	unsigned long		cong;		/* current congestion */
-	unsigned long		cwnd;		/* congestion window */
-
-	size_t			max_payload;	/* largest RPC payload size,
-						   in bytes */
-	unsigned int		tsh_size;	/* size of transport specific
-						   header */
-
-	struct rpc_wait_queue	binding;	/* requests waiting on rpcbind */
-	struct rpc_wait_queue	sending;	/* requests waiting to send */
-	struct rpc_wait_queue	pending;	/* requests in flight */
-	struct rpc_wait_queue	backlog;	/* waiting for slot */
-	struct list_head	free;		/* free slots */
-	unsigned int		max_reqs;	/* max number of slots */
-	unsigned int		min_reqs;	/* min number of slots */
-	atomic_t		num_reqs;	/* total slots */
-	unsigned long		state;		/* transport state */
-	unsigned char		shutdown   : 1,	/* being shut down */
-				resvport   : 1; /* use a reserved port */
-	unsigned int		bind_index;	/* bind function index */
-
-	/*
-	 * Connection of transports
-	 */
-	unsigned long		bind_timeout,
-				reestablish_timeout;
-	unsigned int		connect_cookie;	/* A cookie that gets bumped
-						   every time the transport
-						   is reconnected */
-
-	/*
-	 * Disconnection of idle transports
-	 */
-	struct work_struct	task_cleanup;
-	struct timer_list	timer;
-	unsigned long		last_used,
-				idle_timeout;
-
-	/*
-	 * Send stuff
-	 */
-	spinlock_t		transport_lock;	/* lock transport info */
-	spinlock_t		reserve_lock;	/* lock slot table */
-	u32			xid;		/* Next XID value to use */
-	struct rpc_task *	snd_task;	/* Task blocked in send */
-	struct svc_xprt		*bc_xprt;	/* NFSv4.1 backchannel */
-#if defined(CONFIG_SUNRPC_BACKCHANNEL)
-	struct svc_serv		*bc_serv;       /* The RPC service which will */
-						/* process the callback */
-	unsigned int		bc_alloc_count;	/* Total number of preallocs */
-	spinlock_t		bc_pa_lock;	/* Protects the preallocated
-						 * items */
-	struct list_head	bc_pa_list;	/* List of preallocated
-						 * backchannel rpc_rqst's */
-#endif /* CONFIG_SUNRPC_BACKCHANNEL */
-	struct list_head	recv;
-
-	struct {
-		unsigned long		bind_count,	/* total number of binds */
-					connect_count,	/* total number of connects */
-					connect_start,	/* connect start timestamp */
-					connect_time,	/* jiffies waiting for connect */
-					sends,		/* how many complete requests */
-					recvs,		/* how many complete requests */
-					bad_xids,	/* lookup_rqst didn't find XID */
-					max_slots;	/* max rpc_slots used */
-
-		unsigned long long	req_u,		/* average requests on the wire */
-					bklog_u,	/* backlog queue utilization */
-					sending_u,	/* send q utilization */
-					pending_u;	/* pend q utilization */
-	} stat;
-
-	struct net		*xprt_net;
-	const char		*servername;
-	const char		*address_strings[RPC_DISPLAY_MAX];
-};
-
-#if defined(CONFIG_SUNRPC_BACKCHANNEL)
-/*
- * Backchannel flags
- */
-#define	RPC_BC_PA_IN_USE	0x0001		/* Preallocated backchannel */
-						/* buffer in use */
-#endif /* CONFIG_SUNRPC_BACKCHANNEL */
-
-#if defined(CONFIG_SUNRPC_BACKCHANNEL)
-static inline int bc_prealloc(struct rpc_rqst *req)
-{
-	return test_bit(RPC_BC_PA_IN_USE, &req->rq_bc_pa_state);
-}
-#else
-static inline int bc_prealloc(struct rpc_rqst *req)
-{
-	return 0;
-}
-#endif /* CONFIG_SUNRPC_BACKCHANNEL */
-
-struct xprt_create {
-	int			ident;		/* XPRT_TRANSPORT identifier */
-	struct net *		net;
-	struct sockaddr *	srcaddr;	/* optional local address */
-	struct sockaddr *	dstaddr;	/* remote peer address */
-	size_t			addrlen;
-	const char		*servername;
-	struct svc_xprt		*bc_xprt;	/* NFSv4.1 backchannel */
-};
-
-struct xprt_class {
-	struct list_head	list;
-	int			ident;		/* XPRT_TRANSPORT identifier */
-	struct rpc_xprt *	(*setup)(struct xprt_create *);
-	struct module		*owner;
-	char			name[32];
-};
-
-/*
- * Generic internal transport functions
- */
-struct rpc_xprt		*xprt_create_transport(struct xprt_create *args);
-void			xprt_connect(struct rpc_task *task);
-void			xprt_reserve(struct rpc_task *task);
-int			xprt_reserve_xprt(struct rpc_xprt *xprt, struct rpc_task *task);
-int			xprt_reserve_xprt_cong(struct rpc_xprt *xprt, struct rpc_task *task);
-int			xprt_prepare_transmit(struct rpc_task *task);
-void			xprt_transmit(struct rpc_task *task);
-void			xprt_end_transmit(struct rpc_task *task);
-int			xprt_adjust_timeout(struct rpc_rqst *req);
-void			xprt_release_xprt(struct rpc_xprt *xprt, struct rpc_task *task);
-void			xprt_release_xprt_cong(struct rpc_xprt *xprt, struct rpc_task *task);
-void			xprt_release(struct rpc_task *task);
-struct rpc_xprt *	xprt_get(struct rpc_xprt *xprt);
-void			xprt_put(struct rpc_xprt *xprt);
-struct rpc_xprt *	xprt_alloc(struct net *net, size_t size,
-				unsigned int num_prealloc,
-				unsigned int max_req);
-void			xprt_free(struct rpc_xprt *);
-
-static inline __be32 *xprt_skip_transport_header(struct rpc_xprt *xprt, __be32 *p)
-{
-	return p + xprt->tsh_size;
-}
-
-/*
- * Transport switch helper functions
- */
-int			xprt_register_transport(struct xprt_class *type);
-int			xprt_unregister_transport(struct xprt_class *type);
-int			xprt_load_transport(const char *);
-void			xprt_set_retrans_timeout_def(struct rpc_task *task);
-void			xprt_set_retrans_timeout_rtt(struct rpc_task *task);
-void			xprt_wake_pending_tasks(struct rpc_xprt *xprt, int status);
-void			xprt_wait_for_buffer_space(struct rpc_task *task, rpc_action action);
-void			xprt_write_space(struct rpc_xprt *xprt);
-void			xprt_adjust_cwnd(struct rpc_task *task, int result);
-struct rpc_rqst *	xprt_lookup_rqst(struct rpc_xprt *xprt, __be32 xid);
-void			xprt_complete_rqst(struct rpc_task *task, int copied);
-void			xprt_release_rqst_cong(struct rpc_task *task);
-void			xprt_disconnect_done(struct rpc_xprt *xprt);
-void			xprt_force_disconnect(struct rpc_xprt *xprt);
-void			xprt_conditional_disconnect(struct rpc_xprt *xprt, unsigned int cookie);
-
-/*
- * Reserved bit positions in xprt->state
- */
-#define XPRT_LOCKED		(0)
-#define XPRT_CONNECTED		(1)
-#define XPRT_CONNECTING		(2)
-#define XPRT_CLOSE_WAIT		(3)
-#define XPRT_BOUND		(4)
-#define XPRT_BINDING		(5)
-#define XPRT_CLOSING		(6)
-#define XPRT_CONNECTION_ABORT	(7)
-#define XPRT_CONNECTION_CLOSE	(8)
-
-static inline void xprt_set_connected(struct rpc_xprt *xprt)
-{
-	set_bit(XPRT_CONNECTED, &xprt->state);
-}
-
-static inline void xprt_clear_connected(struct rpc_xprt *xprt)
-{
-	clear_bit(XPRT_CONNECTED, &xprt->state);
-}
-
-static inline int xprt_connected(struct rpc_xprt *xprt)
-{
-	return test_bit(XPRT_CONNECTED, &xprt->state);
-}
-
-static inline int xprt_test_and_set_connected(struct rpc_xprt *xprt)
-{
-	return test_and_set_bit(XPRT_CONNECTED, &xprt->state);
-}
-
-static inline int xprt_test_and_clear_connected(struct rpc_xprt *xprt)
-{
-	return test_and_clear_bit(XPRT_CONNECTED, &xprt->state);
-}
-
-static inline void xprt_clear_connecting(struct rpc_xprt *xprt)
-{
-	smp_mb__before_clear_bit();
-	clear_bit(XPRT_CONNECTING, &xprt->state);
-	smp_mb__after_clear_bit();
-}
-
-static inline int xprt_connecting(struct rpc_xprt *xprt)
-{
-	return test_bit(XPRT_CONNECTING, &xprt->state);
-}
-
-static inline int xprt_test_and_set_connecting(struct rpc_xprt *xprt)
-{
-	return test_and_set_bit(XPRT_CONNECTING, &xprt->state);
-}
-
-static inline void xprt_set_bound(struct rpc_xprt *xprt)
-{
-	test_and_set_bit(XPRT_BOUND, &xprt->state);
-}
-
-static inline int xprt_bound(struct rpc_xprt *xprt)
-{
-	return test_bit(XPRT_BOUND, &xprt->state);
-}
-
-static inline void xprt_clear_bound(struct rpc_xprt *xprt)
-{
-	clear_bit(XPRT_BOUND, &xprt->state);
-}
-
-static inline void xprt_clear_binding(struct rpc_xprt *xprt)
-{
-	smp_mb__before_clear_bit();
-	clear_bit(XPRT_BINDING, &xprt->state);
-	smp_mb__after_clear_bit();
-}
-
-static inline int xprt_test_and_set_binding(struct rpc_xprt *xprt)
-{
-	return test_and_set_bit(XPRT_BINDING, &xprt->state);
-}
-
-#endif /* __KERNEL__*/
-
-#endif /* _LINUX_SUNRPC_XPRT_H */
diff --git a/ANDROID_3.4.5/include/linux/sunrpc/xprtrdma.h b/ANDROID_3.4.5/include/linux/sunrpc/xprtrdma.h
deleted file mode 100644
index c2f04e1a..00000000
--- a/ANDROID_3.4.5/include/linux/sunrpc/xprtrdma.h
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
- * Copyright (c) 2003-2007 Network Appliance, Inc. All rights reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses.  You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the BSD-type
- * license below:
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- *      Redistributions of source code must retain the above copyright
- *      notice, this list of conditions and the following disclaimer.
- *
- *      Redistributions in binary form must reproduce the above
- *      copyright notice, this list of conditions and the following
- *      disclaimer in the documentation and/or other materials provided
- *      with the distribution.
- *
- *      Neither the name of the Network Appliance, Inc. nor the names of
- *      its contributors may be used to endorse or promote products
- *      derived from this software without specific prior written
- *      permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#ifndef _LINUX_SUNRPC_XPRTRDMA_H
-#define _LINUX_SUNRPC_XPRTRDMA_H
-
-/*
- * rpcbind (v3+) RDMA netid.
- */
-#define RPCBIND_NETID_RDMA	"rdma"
-
-/*
- * Constants. Max RPC/NFS header is big enough to account for
- * additional marshaling buffers passed down by Linux client.
- *
- * RDMA header is currently fixed max size, and is big enough for a
- * fully-chunked NFS message (read chunks are the largest). Note only
- * a single chunk type per message is supported currently.
- */
-#define RPCRDMA_MIN_SLOT_TABLE	(2U)
-#define RPCRDMA_DEF_SLOT_TABLE	(32U)
-#define RPCRDMA_MAX_SLOT_TABLE	(256U)
-
-#define RPCRDMA_DEF_INLINE  (1024)	/* default inline max */
-
-#define RPCRDMA_INLINE_PAD_THRESH  (512)/* payload threshold to pad (bytes) */
-
-/* memory registration strategies */
-#define RPCRDMA_PERSISTENT_REGISTRATION (1)
-
-enum rpcrdma_memreg {
-	RPCRDMA_BOUNCEBUFFERS = 0,
-	RPCRDMA_REGISTER,
-	RPCRDMA_MEMWINDOWS,
-	RPCRDMA_MEMWINDOWS_ASYNC,
-	RPCRDMA_MTHCAFMR,
-	RPCRDMA_FRMR,
-	RPCRDMA_ALLPHYSICAL,
-	RPCRDMA_LAST
-};
-
-#endif /* _LINUX_SUNRPC_XPRTRDMA_H */
diff --git a/ANDROID_3.4.5/include/linux/sunrpc/xprtsock.h b/ANDROID_3.4.5/include/linux/sunrpc/xprtsock.h
deleted file mode 100644
index 1ad36cc2..00000000
--- a/ANDROID_3.4.5/include/linux/sunrpc/xprtsock.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- *  linux/include/linux/sunrpc/xprtsock.h
- *
- *  Declarations for the RPC transport socket provider.
- */
-
-#ifndef _LINUX_SUNRPC_XPRTSOCK_H
-#define _LINUX_SUNRPC_XPRTSOCK_H
-
-#ifdef __KERNEL__
-
-int		init_socket_xprt(void);
-void		cleanup_socket_xprt(void);
-
-#define RPC_MIN_RESVPORT	(1U)
-#define RPC_MAX_RESVPORT	(65535U)
-#define RPC_DEF_MIN_RESVPORT	(665U)
-#define RPC_DEF_MAX_RESVPORT	(1023U)
-
-#endif /* __KERNEL__ */
-
-#endif /* _LINUX_SUNRPC_XPRTSOCK_H */
diff --git a/ANDROID_3.4.5/include/linux/sunserialcore.h b/ANDROID_3.4.5/include/linux/sunserialcore.h
deleted file mode 100644
index 68e7430b..00000000
--- a/ANDROID_3.4.5/include/linux/sunserialcore.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/* sunserialcore.h
- *
- * Generic SUN serial/kbd/ms layer.  Based entirely
- * upon drivers/sbus/char/sunserial.h which is:
- *
- * Copyright (C) 1997  Eddie C. Dost  (ecd@skynet.be)
- *
- * Port to new UART layer is:
- *
- * Copyright (C) 2002 David S. Miller (davem@redhat.com)
- */
-
-#ifndef _SERIAL_SUN_H
-#define _SERIAL_SUN_H
-
-/* Serial keyboard defines for L1-A processing... */
-#define SUNKBD_RESET		0xff
-#define SUNKBD_L1		0x01
-#define SUNKBD_UP		0x80
-#define SUNKBD_A		0x4d
-
-extern unsigned int suncore_mouse_baud_cflag_next(unsigned int, int *);
-extern int suncore_mouse_baud_detection(unsigned char, int);
-
-extern int sunserial_register_minors(struct uart_driver *, int);
-extern void sunserial_unregister_minors(struct uart_driver *, int);
-
-extern int sunserial_console_match(struct console *, struct device_node *,
-				   struct uart_driver *, int, bool);
-extern void sunserial_console_termios(struct console *,
-				      struct device_node *);
-
-#endif /* !(_SERIAL_SUN_H) */
diff --git a/ANDROID_3.4.5/include/linux/superhyway.h b/ANDROID_3.4.5/include/linux/superhyway.h
deleted file mode 100644
index 17ea468f..00000000
--- a/ANDROID_3.4.5/include/linux/superhyway.h
+++ /dev/null
@@ -1,107 +0,0 @@
-/*
- * include/linux/superhyway.h
- *
- * SuperHyway Bus definitions
- *
- * Copyright (C) 2004, 2005  Paul Mundt <lethal@linux-sh.org>
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#ifndef __LINUX_SUPERHYWAY_H
-#define __LINUX_SUPERHYWAY_H
-
-#include <linux/device.h>
-
-/*
- * SuperHyway IDs
- */
-#define SUPERHYWAY_DEVICE_ID_SH5_DMAC	0x0183
-
-struct superhyway_vcr_info {
-	u8	perr_flags;	/* P-port Error flags */
-	u8	merr_flags;	/* Module Error flags */
-	u16	mod_vers;	/* Module Version */
-	u16	mod_id;		/* Module ID */
-	u8	bot_mb;		/* Bottom Memory block */
-	u8	top_mb;		/* Top Memory block */
-};
-
-struct superhyway_ops {
-	int (*read_vcr)(unsigned long base, struct superhyway_vcr_info *vcr);
-	int (*write_vcr)(unsigned long base, struct superhyway_vcr_info vcr);
-};
-
-struct superhyway_bus {
-	struct superhyway_ops *ops;
-};
-
-extern struct superhyway_bus superhyway_channels[];
-
-struct superhyway_device_id {
-	unsigned int id;
-	unsigned long driver_data;
-};
-
-struct superhyway_device;
-extern struct bus_type superhyway_bus_type;
-
-struct superhyway_driver {
-	char *name;
-
-	const struct superhyway_device_id *id_table;
-	struct device_driver drv;
-
-	int (*probe)(struct superhyway_device *dev, const struct superhyway_device_id *id);
-	void (*remove)(struct superhyway_device *dev);
-};
-
-#define to_superhyway_driver(d)	container_of((d), struct superhyway_driver, drv)
-
-struct superhyway_device {
-	char name[32];
-
-	struct device dev;
-
-	struct superhyway_device_id id;
-	struct superhyway_driver *drv;
-	struct superhyway_bus *bus;
-
-	int num_resources;
-	struct resource *resource;
-	struct superhyway_vcr_info vcr;
-};
-
-#define to_superhyway_device(d)	container_of((d), struct superhyway_device, dev)
-
-#define superhyway_get_drvdata(d)	dev_get_drvdata(&(d)->dev)
-#define superhyway_set_drvdata(d,p)	dev_set_drvdata(&(d)->dev, (p))
-
-static inline int
-superhyway_read_vcr(struct superhyway_device *dev, unsigned long base,
-		    struct superhyway_vcr_info *vcr)
-{
-	return dev->bus->ops->read_vcr(base, vcr);
-}
-
-static inline int
-superhyway_write_vcr(struct superhyway_device *dev, unsigned long base,
-		     struct superhyway_vcr_info vcr)
-{
-	return dev->bus->ops->write_vcr(base, vcr);
-}
-
-extern int superhyway_scan_bus(struct superhyway_bus *);
-
-/* drivers/sh/superhyway/superhyway.c */
-int superhyway_register_driver(struct superhyway_driver *);
-void superhyway_unregister_driver(struct superhyway_driver *);
-int superhyway_add_device(unsigned long base, struct superhyway_device *, struct superhyway_bus *);
-int superhyway_add_devices(struct superhyway_bus *bus, struct superhyway_device **devices, int nr_devices);
-
-/* drivers/sh/superhyway/superhyway-sysfs.c */
-extern struct device_attribute superhyway_dev_attrs[];
-
-#endif /* __LINUX_SUPERHYWAY_H */
-
diff --git a/ANDROID_3.4.5/include/linux/suspend.h b/ANDROID_3.4.5/include/linux/suspend.h
deleted file mode 100644
index a79a28f5..00000000
--- a/ANDROID_3.4.5/include/linux/suspend.h
+++ /dev/null
@@ -1,456 +0,0 @@
-#ifndef _LINUX_SUSPEND_H
-#define _LINUX_SUSPEND_H
-
-#include <linux/swap.h>
-#include <linux/notifier.h>
-#include <linux/init.h>
-#include <linux/pm.h>
-#include <linux/mm.h>
-#include <linux/freezer.h>
-#include <asm/errno.h>
-
-#ifdef CONFIG_VT
-extern void pm_set_vt_switch(int);
-#else
-static inline void pm_set_vt_switch(int do_switch)
-{
-}
-#endif
-
-#ifdef CONFIG_VT_CONSOLE_SLEEP
-extern int pm_prepare_console(void);
-extern void pm_restore_console(void);
-#else
-static inline int pm_prepare_console(void)
-{
-	return 0;
-}
-
-static inline void pm_restore_console(void)
-{
-}
-#endif
-
-typedef int __bitwise suspend_state_t;
-
-#define PM_SUSPEND_ON		((__force suspend_state_t) 0)
-#define PM_SUSPEND_STANDBY	((__force suspend_state_t) 1)
-#define PM_SUSPEND_MEM		((__force suspend_state_t) 3)
-#define PM_SUSPEND_MAX		((__force suspend_state_t) 4)
-
-enum suspend_stat_step {
-	SUSPEND_FREEZE = 1,
-	SUSPEND_PREPARE,
-	SUSPEND_SUSPEND,
-	SUSPEND_SUSPEND_LATE,
-	SUSPEND_SUSPEND_NOIRQ,
-	SUSPEND_RESUME_NOIRQ,
-	SUSPEND_RESUME_EARLY,
-	SUSPEND_RESUME
-};
-
-struct suspend_stats {
-	int	success;
-	int	fail;
-	int	failed_freeze;
-	int	failed_prepare;
-	int	failed_suspend;
-	int	failed_suspend_late;
-	int	failed_suspend_noirq;
-	int	failed_resume;
-	int	failed_resume_early;
-	int	failed_resume_noirq;
-#define	REC_FAILED_NUM	2
-	int	last_failed_dev;
-	char	failed_devs[REC_FAILED_NUM][40];
-	int	last_failed_errno;
-	int	errno[REC_FAILED_NUM];
-	int	last_failed_step;
-	enum suspend_stat_step	failed_steps[REC_FAILED_NUM];
-};
-
-extern struct suspend_stats suspend_stats;
-
-static inline void dpm_save_failed_dev(const char *name)
-{
-	strlcpy(suspend_stats.failed_devs[suspend_stats.last_failed_dev],
-		name,
-		sizeof(suspend_stats.failed_devs[0]));
-	suspend_stats.last_failed_dev++;
-	suspend_stats.last_failed_dev %= REC_FAILED_NUM;
-}
-
-static inline void dpm_save_failed_errno(int err)
-{
-	suspend_stats.errno[suspend_stats.last_failed_errno] = err;
-	suspend_stats.last_failed_errno++;
-	suspend_stats.last_failed_errno %= REC_FAILED_NUM;
-}
-
-static inline void dpm_save_failed_step(enum suspend_stat_step step)
-{
-	suspend_stats.failed_steps[suspend_stats.last_failed_step] = step;
-	suspend_stats.last_failed_step++;
-	suspend_stats.last_failed_step %= REC_FAILED_NUM;
-}
-
-/**
- * struct platform_suspend_ops - Callbacks for managing platform dependent
- *	system sleep states.
- *
- * @valid: Callback to determine if given system sleep state is supported by
- *	the platform.
- *	Valid (ie. supported) states are advertised in /sys/power/state.  Note
- *	that it still may be impossible to enter given system sleep state if the
- *	conditions aren't right.
- *	There is the %suspend_valid_only_mem function available that can be
- *	assigned to this if the platform only supports mem sleep.
- *
- * @begin: Initialise a transition to given system sleep state.
- *	@begin() is executed right prior to suspending devices.  The information
- *	conveyed to the platform code by @begin() should be disregarded by it as
- *	soon as @end() is executed.  If @begin() fails (ie. returns nonzero),
- *	@prepare(), @enter() and @finish() will not be called by the PM core.
- *	This callback is optional.  However, if it is implemented, the argument
- *	passed to @enter() is redundant and should be ignored.
- *
- * @prepare: Prepare the platform for entering the system sleep state indicated
- *	by @begin().
- *	@prepare() is called right after devices have been suspended (ie. the
- *	appropriate .suspend() method has been executed for each device) and
- *	before device drivers' late suspend callbacks are executed.  It returns
- *	0 on success or a negative error code otherwise, in which case the
- *	system cannot enter the desired sleep state (@prepare_late(), @enter(),
- *	and @wake() will not be called in that case).
- *
- * @prepare_late: Finish preparing the platform for entering the system sleep
- *	state indicated by @begin().
- *	@prepare_late is called before disabling nonboot CPUs and after
- *	device drivers' late suspend callbacks have been executed.  It returns
- *	0 on success or a negative error code otherwise, in which case the
- *	system cannot enter the desired sleep state (@enter() will not be
- *	executed).
- *
- * @enter: Enter the system sleep state indicated by @begin() or represented by
- *	the argument if @begin() is not implemented.
- *	This callback is mandatory.  It returns 0 on success or a negative
- *	error code otherwise, in which case the system cannot enter the desired
- *	sleep state.
- *
- * @wake: Called when the system has just left a sleep state, right after
- *	the nonboot CPUs have been enabled and before device drivers' early
- *	resume callbacks are executed.
- *	This callback is optional, but should be implemented by the platforms
- *	that implement @prepare_late().  If implemented, it is always called
- *	after @prepare_late and @enter(), even if one of them fails.
- *
- * @finish: Finish wake-up of the platform.
- *	@finish is called right prior to calling device drivers' regular suspend
- *	callbacks.
- *	This callback is optional, but should be implemented by the platforms
- *	that implement @prepare().  If implemented, it is always called after
- *	@enter() and @wake(), even if any of them fails.  It is executed after
- *	a failing @prepare.
- *
- * @suspend_again: Returns whether the system should suspend again (true) or
- *	not (false). If the platform wants to poll sensors or execute some
- *	code during suspended without invoking userspace and most of devices,
- *	suspend_again callback is the place assuming that periodic-wakeup or
- *	alarm-wakeup is already setup. This allows to execute some codes while
- *	being kept suspended in the view of userland and devices.
- *
- * @end: Called by the PM core right after resuming devices, to indicate to
- *	the platform that the system has returned to the working state or
- *	the transition to the sleep state has been aborted.
- *	This callback is optional, but should be implemented by the platforms
- *	that implement @begin().  Accordingly, platforms implementing @begin()
- *	should also provide a @end() which cleans up transitions aborted before
- *	@enter().
- *
- * @recover: Recover the platform from a suspend failure.
- *	Called by the PM core if the suspending of devices fails.
- *	This callback is optional and should only be implemented by platforms
- *	which require special recovery actions in that situation.
- */
-struct platform_suspend_ops {
-	int (*valid)(suspend_state_t state);
-	int (*begin)(suspend_state_t state);
-	int (*prepare)(void);
-	int (*prepare_late)(void);
-	int (*enter)(suspend_state_t state);
-	void (*wake)(void);
-	void (*finish)(void);
-	bool (*suspend_again)(void);
-	void (*end)(void);
-	void (*recover)(void);
-};
-
-#ifdef CONFIG_SUSPEND
-/**
- * suspend_set_ops - set platform dependent suspend operations
- * @ops: The new suspend operations to set.
- */
-extern void suspend_set_ops(const struct platform_suspend_ops *ops);
-extern int suspend_valid_only_mem(suspend_state_t state);
-
-/**
- * arch_suspend_disable_irqs - disable IRQs for suspend
- *
- * Disables IRQs (in the default case). This is a weak symbol in the common
- * code and thus allows architectures to override it if more needs to be
- * done. Not called for suspend to disk.
- */
-extern void arch_suspend_disable_irqs(void);
-
-/**
- * arch_suspend_enable_irqs - enable IRQs after suspend
- *
- * Enables IRQs (in the default case). This is a weak symbol in the common
- * code and thus allows architectures to override it if more needs to be
- * done. Not called for suspend to disk.
- */
-extern void arch_suspend_enable_irqs(void);
-
-extern int pm_suspend(suspend_state_t state);
-#else /* !CONFIG_SUSPEND */
-#define suspend_valid_only_mem	NULL
-
-static inline void suspend_set_ops(const struct platform_suspend_ops *ops) {}
-static inline int pm_suspend(suspend_state_t state) { return -ENOSYS; }
-#endif /* !CONFIG_SUSPEND */
-
-/* struct pbe is used for creating lists of pages that should be restored
- * atomically during the resume from disk, because the page frames they have
- * occupied before the suspend are in use.
- */
-struct pbe {
-	void *address;		/* address of the copy */
-	void *orig_address;	/* original address of a page */
-	struct pbe *next;
-};
-
-/* mm/page_alloc.c */
-extern void mark_free_pages(struct zone *zone);
-
-/**
- * struct platform_hibernation_ops - hibernation platform support
- *
- * The methods in this structure allow a platform to carry out special
- * operations required by it during a hibernation transition.
- *
- * All the methods below, except for @recover(), must be implemented.
- *
- * @begin: Tell the platform driver that we're starting hibernation.
- *	Called right after shrinking memory and before freezing devices.
- *
- * @end: Called by the PM core right after resuming devices, to indicate to
- *	the platform that the system has returned to the working state.
- *
- * @pre_snapshot: Prepare the platform for creating the hibernation image.
- *	Called right after devices have been frozen and before the nonboot
- *	CPUs are disabled (runs with IRQs on).
- *
- * @finish: Restore the previous state of the platform after the hibernation
- *	image has been created *or* put the platform into the normal operation
- *	mode after the hibernation (the same method is executed in both cases).
- *	Called right after the nonboot CPUs have been enabled and before
- *	thawing devices (runs with IRQs on).
- *
- * @prepare: Prepare the platform for entering the low power state.
- *	Called right after the hibernation image has been saved and before
- *	devices are prepared for entering the low power state.
- *
- * @enter: Put the system into the low power state after the hibernation image
- *	has been saved to disk.
- *	Called after the nonboot CPUs have been disabled and all of the low
- *	level devices have been shut down (runs with IRQs off).
- *
- * @leave: Perform the first stage of the cleanup after the system sleep state
- *	indicated by @set_target() has been left.
- *	Called right after the control has been passed from the boot kernel to
- *	the image kernel, before the nonboot CPUs are enabled and before devices
- *	are resumed.  Executed with interrupts disabled.
- *
- * @pre_restore: Prepare system for the restoration from a hibernation image.
- *	Called right after devices have been frozen and before the nonboot
- *	CPUs are disabled (runs with IRQs on).
- *
- * @restore_cleanup: Clean up after a failing image restoration.
- *	Called right after the nonboot CPUs have been enabled and before
- *	thawing devices (runs with IRQs on).
- *
- * @recover: Recover the platform from a failure to suspend devices.
- *	Called by the PM core if the suspending of devices during hibernation
- *	fails.  This callback is optional and should only be implemented by
- *	platforms which require special recovery actions in that situation.
- */
-struct platform_hibernation_ops {
-	int (*begin)(void);
-	void (*end)(void);
-	int (*pre_snapshot)(void);
-	void (*finish)(void);
-	int (*prepare)(void);
-	int (*enter)(void);
-	void (*leave)(void);
-	int (*pre_restore)(void);
-	void (*restore_cleanup)(void);
-	void (*recover)(void);
-};
-
-#ifdef CONFIG_HIBERNATION
-/* kernel/power/snapshot.c */
-extern void __register_nosave_region(unsigned long b, unsigned long e, int km);
-static inline void __init register_nosave_region(unsigned long b, unsigned long e)
-{
-	__register_nosave_region(b, e, 0);
-}
-static inline void __init register_nosave_region_late(unsigned long b, unsigned long e)
-{
-	__register_nosave_region(b, e, 1);
-}
-extern int swsusp_page_is_forbidden(struct page *);
-extern void swsusp_set_page_free(struct page *);
-extern void swsusp_unset_page_free(struct page *);
-extern unsigned long get_safe_page(gfp_t gfp_mask);
-
-extern void hibernation_set_ops(const struct platform_hibernation_ops *ops);
-extern int hibernate(void);
-extern bool system_entering_hibernation(void);
-#else /* CONFIG_HIBERNATION */
-static inline void register_nosave_region(unsigned long b, unsigned long e) {}
-static inline void register_nosave_region_late(unsigned long b, unsigned long e) {}
-static inline int swsusp_page_is_forbidden(struct page *p) { return 0; }
-static inline void swsusp_set_page_free(struct page *p) {}
-static inline void swsusp_unset_page_free(struct page *p) {}
-
-static inline void hibernation_set_ops(const struct platform_hibernation_ops *ops) {}
-static inline int hibernate(void) { return -ENOSYS; }
-static inline bool system_entering_hibernation(void) { return false; }
-#endif /* CONFIG_HIBERNATION */
-
-/* Hibernation and suspend events */
-#define PM_HIBERNATION_PREPARE	0x0001 /* Going to hibernate */
-#define PM_POST_HIBERNATION	0x0002 /* Hibernation finished */
-#define PM_SUSPEND_PREPARE	0x0003 /* Going to suspend the system */
-#define PM_POST_SUSPEND		0x0004 /* Suspend finished */
-#define PM_RESTORE_PREPARE	0x0005 /* Going to restore a saved image */
-#define PM_POST_RESTORE		0x0006 /* Restore failed */
-#define PM_HIBERNATION_FINISH       0x0007
-extern struct mutex pm_mutex;
-
-#ifdef CONFIG_PM_SLEEP
-void save_processor_state(void);
-void restore_processor_state(void);
-
-/* kernel/power/main.c */
-extern int register_pm_notifier(struct notifier_block *nb);
-extern int unregister_pm_notifier(struct notifier_block *nb);
-
-#define pm_notifier(fn, pri) {				\
-	static struct notifier_block fn##_nb =			\
-		{ .notifier_call = fn, .priority = pri };	\
-	register_pm_notifier(&fn##_nb);			\
-}
-
-/* drivers/base/power/wakeup.c */
-extern bool events_check_enabled;
-
-extern bool pm_wakeup_pending(void);
-extern bool pm_get_wakeup_count(unsigned int *count, bool block);
-extern bool pm_save_wakeup_count(unsigned int count);
-extern void pm_wakep_autosleep_enabled(bool set);
-
-static inline void lock_system_sleep(void)
-{
-	current->flags |= PF_FREEZER_SKIP;
-	mutex_lock(&pm_mutex);
-}
-
-static inline void unlock_system_sleep(void)
-{
-	/*
-	 * Don't use freezer_count() because we don't want the call to
-	 * try_to_freeze() here.
-	 *
-	 * Reason:
-	 * Fundamentally, we just don't need it, because freezing condition
-	 * doesn't come into effect until we release the pm_mutex lock,
-	 * since the freezer always works with pm_mutex held.
-	 *
-	 * More importantly, in the case of hibernation,
-	 * unlock_system_sleep() gets called in snapshot_read() and
-	 * snapshot_write() when the freezing condition is still in effect.
-	 * Which means, if we use try_to_freeze() here, it would make them
-	 * enter the refrigerator, thus causing hibernation to lockup.
-	 */
-	current->flags &= ~PF_FREEZER_SKIP;
-	mutex_unlock(&pm_mutex);
-}
-
-#else /* !CONFIG_PM_SLEEP */
-
-static inline int register_pm_notifier(struct notifier_block *nb)
-{
-	return 0;
-}
-
-static inline int unregister_pm_notifier(struct notifier_block *nb)
-{
-	return 0;
-}
-
-#define pm_notifier(fn, pri)	do { (void)(fn); } while (0)
-
-static inline bool pm_wakeup_pending(void) { return false; }
-
-static inline void lock_system_sleep(void) {}
-static inline void unlock_system_sleep(void) {}
-
-#endif /* !CONFIG_PM_SLEEP */
-
-#ifdef CONFIG_PM_AUTOSLEEP
-
-/* kernel/power/autosleep.c */
-void queue_up_suspend_work(void);
-
-#else /* !CONFIG_PM_AUTOSLEEP */
-
-static inline void queue_up_suspend_work(void) {}
-
-#endif /* !CONFIG_PM_AUTOSLEEP */
-
-#ifdef CONFIG_ARCH_SAVE_PAGE_KEYS
-/*
- * The ARCH_SAVE_PAGE_KEYS functions can be used by an architecture
- * to save/restore additional information to/from the array of page
- * frame numbers in the hibernation image. For s390 this is used to
- * save and restore the storage key for each page that is included
- * in the hibernation image.
- */
-unsigned long page_key_additional_pages(unsigned long pages);
-int page_key_alloc(unsigned long pages);
-void page_key_free(void);
-void page_key_read(unsigned long *pfn);
-void page_key_memorize(unsigned long *pfn);
-void page_key_write(void *address);
-
-#else /* !CONFIG_ARCH_SAVE_PAGE_KEYS */
-
-static inline unsigned long page_key_additional_pages(unsigned long pages)
-{
-	return 0;
-}
-
-static inline int  page_key_alloc(unsigned long pages)
-{
-	return 0;
-}
-
-static inline void page_key_free(void) {}
-static inline void page_key_read(unsigned long *pfn) {}
-static inline void page_key_memorize(unsigned long *pfn) {}
-static inline void page_key_write(void *address) {}
-
-#endif /* !CONFIG_ARCH_SAVE_PAGE_KEYS */
-
-#endif /* _LINUX_SUSPEND_H */
diff --git a/ANDROID_3.4.5/include/linux/suspend_ioctls.h b/ANDROID_3.4.5/include/linux/suspend_ioctls.h
deleted file mode 100644
index 0b303829..00000000
--- a/ANDROID_3.4.5/include/linux/suspend_ioctls.h
+++ /dev/null
@@ -1,33 +0,0 @@
-#ifndef _LINUX_SUSPEND_IOCTLS_H
-#define _LINUX_SUSPEND_IOCTLS_H
-
-#include <linux/types.h>
-/*
- * This structure is used to pass the values needed for the identification
- * of the resume swap area from a user space to the kernel via the
- * SNAPSHOT_SET_SWAP_AREA ioctl
- */
-struct resume_swap_area {
-	__kernel_loff_t offset;
-	__u32 dev;
-} __attribute__((packed));
-
-#define SNAPSHOT_IOC_MAGIC	'3'
-#define SNAPSHOT_FREEZE			_IO(SNAPSHOT_IOC_MAGIC, 1)
-#define SNAPSHOT_UNFREEZE		_IO(SNAPSHOT_IOC_MAGIC, 2)
-#define SNAPSHOT_ATOMIC_RESTORE		_IO(SNAPSHOT_IOC_MAGIC, 4)
-#define SNAPSHOT_FREE			_IO(SNAPSHOT_IOC_MAGIC, 5)
-#define SNAPSHOT_FREE_SWAP_PAGES	_IO(SNAPSHOT_IOC_MAGIC, 9)
-#define SNAPSHOT_S2RAM			_IO(SNAPSHOT_IOC_MAGIC, 11)
-#define SNAPSHOT_SET_SWAP_AREA		_IOW(SNAPSHOT_IOC_MAGIC, 13, \
-							struct resume_swap_area)
-#define SNAPSHOT_GET_IMAGE_SIZE		_IOR(SNAPSHOT_IOC_MAGIC, 14, __kernel_loff_t)
-#define SNAPSHOT_PLATFORM_SUPPORT	_IO(SNAPSHOT_IOC_MAGIC, 15)
-#define SNAPSHOT_POWER_OFF		_IO(SNAPSHOT_IOC_MAGIC, 16)
-#define SNAPSHOT_CREATE_IMAGE		_IOW(SNAPSHOT_IOC_MAGIC, 17, int)
-#define SNAPSHOT_PREF_IMAGE_SIZE	_IO(SNAPSHOT_IOC_MAGIC, 18)
-#define SNAPSHOT_AVAIL_SWAP_SIZE	_IOR(SNAPSHOT_IOC_MAGIC, 19, __kernel_loff_t)
-#define SNAPSHOT_ALLOC_SWAP_PAGE	_IOR(SNAPSHOT_IOC_MAGIC, 20, __kernel_loff_t)
-#define SNAPSHOT_IOC_MAXNR	20
-
-#endif /* _LINUX_SUSPEND_IOCTLS_H */
diff --git a/ANDROID_3.4.5/include/linux/svga.h b/ANDROID_3.4.5/include/linux/svga.h
deleted file mode 100644
index bfa68e83..00000000
--- a/ANDROID_3.4.5/include/linux/svga.h
+++ /dev/null
@@ -1,124 +0,0 @@
-#ifndef _LINUX_SVGA_H
-#define _LINUX_SVGA_H
-
-#include <linux/pci.h>
-#include <video/vga.h>
-
-/* Terminator for register set */
-
-#define VGA_REGSET_END_VAL	0xFF
-#define VGA_REGSET_END		{VGA_REGSET_END_VAL, 0, 0}
-
-struct vga_regset {
-	u8 regnum;
-	u8 lowbit;
-	u8 highbit;
-};
-
-/* ------------------------------------------------------------------------- */
-
-#define SVGA_FORMAT_END_VAL	0xFFFF
-#define SVGA_FORMAT_END		{SVGA_FORMAT_END_VAL, {0, 0, 0}, {0, 0, 0}, {0, 0, 0}, {0, 0, 0}, 0, 0, 0, 0, 0, 0}
-
-struct svga_fb_format {
-	/* var part */
-	u32 bits_per_pixel;
-	struct fb_bitfield red;
-	struct fb_bitfield green;
-	struct fb_bitfield blue;
-	struct fb_bitfield transp;
-	u32 nonstd;
-	/* fix part */
-	u32 type;
-	u32 type_aux;
-	u32 visual;
-	u32 xpanstep;
-	u32 xresstep;
-};
-
-struct svga_timing_regs {
-	const struct vga_regset *h_total_regs;
-	const struct vga_regset *h_display_regs;
-	const struct vga_regset *h_blank_start_regs;
-	const struct vga_regset *h_blank_end_regs;
-	const struct vga_regset *h_sync_start_regs;
-	const struct vga_regset *h_sync_end_regs;
-
-	const struct vga_regset *v_total_regs;
-	const struct vga_regset *v_display_regs;
-	const struct vga_regset *v_blank_start_regs;
-	const struct vga_regset *v_blank_end_regs;
-	const struct vga_regset *v_sync_start_regs;
-	const struct vga_regset *v_sync_end_regs;
-};
-
-struct svga_pll {
-	u16 m_min;
-	u16 m_max;
-	u16 n_min;
-	u16 n_max;
-	u16 r_min;
-	u16 r_max;  /* r_max < 32 */
-	u32 f_vco_min;
-	u32 f_vco_max;
-	u32 f_base;
-};
-
-
-/* Write a value to the attribute register */
-
-static inline void svga_wattr(void __iomem *regbase, u8 index, u8 data)
-{
-	vga_r(regbase, VGA_IS1_RC);
-	vga_w(regbase, VGA_ATT_IW, index);
-	vga_w(regbase, VGA_ATT_W, data);
-}
-
-/* Write a value to a sequence register with a mask */
-
-static inline void svga_wseq_mask(void __iomem *regbase, u8 index, u8 data, u8 mask)
-{
-	vga_wseq(regbase, index, (data & mask) | (vga_rseq(regbase, index) & ~mask));
-}
-
-/* Write a value to a CRT register with a mask */
-
-static inline void svga_wcrt_mask(void __iomem *regbase, u8 index, u8 data, u8 mask)
-{
-	vga_wcrt(regbase, index, (data & mask) | (vga_rcrt(regbase, index) & ~mask));
-}
-
-static inline int svga_primary_device(struct pci_dev *dev)
-{
-	u16 flags;
-	pci_read_config_word(dev, PCI_COMMAND, &flags);
-	return (flags & PCI_COMMAND_IO);
-}
-
-
-void svga_wcrt_multi(void __iomem *regbase, const struct vga_regset *regset, u32 value);
-void svga_wseq_multi(void __iomem *regbase, const struct vga_regset *regset, u32 value);
-
-void svga_set_default_gfx_regs(void __iomem *regbase);
-void svga_set_default_atc_regs(void __iomem *regbase);
-void svga_set_default_seq_regs(void __iomem *regbase);
-void svga_set_default_crt_regs(void __iomem *regbase);
-void svga_set_textmode_vga_regs(void __iomem *regbase);
-
-void svga_settile(struct fb_info *info, struct fb_tilemap *map);
-void svga_tilecopy(struct fb_info *info, struct fb_tilearea *area);
-void svga_tilefill(struct fb_info *info, struct fb_tilerect *rect);
-void svga_tileblit(struct fb_info *info, struct fb_tileblit *blit);
-void svga_tilecursor(void __iomem *regbase, struct fb_info *info, struct fb_tilecursor *cursor);
-int svga_get_tilemax(struct fb_info *info);
-void svga_get_caps(struct fb_info *info, struct fb_blit_caps *caps,
-		   struct fb_var_screeninfo *var);
-
-int svga_compute_pll(const struct svga_pll *pll, u32 f_wanted, u16 *m, u16 *n, u16 *r, int node);
-int svga_check_timings(const struct svga_timing_regs *tm, struct fb_var_screeninfo *var, int node);
-void svga_set_timings(void __iomem *regbase, const struct svga_timing_regs *tm, struct fb_var_screeninfo *var, u32 hmul, u32 hdiv, u32 vmul, u32 vdiv, u32 hborder, int node);
-
-int svga_match_format(const struct svga_fb_format *frm, struct fb_var_screeninfo *var, struct fb_fix_screeninfo *fix);
-
-#endif /* _LINUX_SVGA_H */
-
diff --git a/ANDROID_3.4.5/include/linux/sw_sync.h b/ANDROID_3.4.5/include/linux/sw_sync.h
deleted file mode 100644
index bd6f2089..00000000
--- a/ANDROID_3.4.5/include/linux/sw_sync.h
+++ /dev/null
@@ -1,58 +0,0 @@
-/*
- * include/linux/sw_sync.h
- *
- * Copyright (C) 2012 Google, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef _LINUX_SW_SYNC_H
-#define _LINUX_SW_SYNC_H
-
-#include <linux/types.h>
-
-#ifdef __KERNEL__
-
-#include <linux/sync.h>
-
-struct sw_sync_timeline {
-	struct	sync_timeline	obj;
-
-	u32			value;
-};
-
-struct sw_sync_pt {
-	struct sync_pt		pt;
-
-	u32			value;
-};
-
-struct sw_sync_timeline *sw_sync_timeline_create(const char *name);
-void sw_sync_timeline_inc(struct sw_sync_timeline *obj, u32 inc);
-
-struct sync_pt *sw_sync_pt_create(struct sw_sync_timeline *obj, u32 value);
-
-#endif /* __KERNEL __ */
-
-struct sw_sync_create_fence_data {
-	__u32	value;
-	char	name[32];
-	__s32	fence; /* fd of new fence */
-};
-
-#define SW_SYNC_IOC_MAGIC	'W'
-
-#define SW_SYNC_IOC_CREATE_FENCE	_IOWR(SW_SYNC_IOC_MAGIC, 0,\
-		struct sw_sync_create_fence_data)
-#define SW_SYNC_IOC_INC			_IOW(SW_SYNC_IOC_MAGIC, 1, __u32)
-
-
-#endif /* _LINUX_SW_SYNC_H */
diff --git a/ANDROID_3.4.5/include/linux/swab.h b/ANDROID_3.4.5/include/linux/swab.h
deleted file mode 100644
index ea0c02fd..00000000
--- a/ANDROID_3.4.5/include/linux/swab.h
+++ /dev/null
@@ -1,299 +0,0 @@
-#ifndef _LINUX_SWAB_H
-#define _LINUX_SWAB_H
-
-#include <linux/types.h>
-#include <linux/compiler.h>
-#include <asm/swab.h>
-
-/*
- * casts are necessary for constants, because we never know how for sure
- * how U/UL/ULL map to __u16, __u32, __u64. At least not in a portable way.
- */
-#define ___constant_swab16(x) ((__u16)(				\
-	(((__u16)(x) & (__u16)0x00ffU) << 8) |			\
-	(((__u16)(x) & (__u16)0xff00U) >> 8)))
-
-#define ___constant_swab32(x) ((__u32)(				\
-	(((__u32)(x) & (__u32)0x000000ffUL) << 24) |		\
-	(((__u32)(x) & (__u32)0x0000ff00UL) <<  8) |		\
-	(((__u32)(x) & (__u32)0x00ff0000UL) >>  8) |		\
-	(((__u32)(x) & (__u32)0xff000000UL) >> 24)))
-
-#define ___constant_swab64(x) ((__u64)(				\
-	(((__u64)(x) & (__u64)0x00000000000000ffULL) << 56) |	\
-	(((__u64)(x) & (__u64)0x000000000000ff00ULL) << 40) |	\
-	(((__u64)(x) & (__u64)0x0000000000ff0000ULL) << 24) |	\
-	(((__u64)(x) & (__u64)0x00000000ff000000ULL) <<  8) |	\
-	(((__u64)(x) & (__u64)0x000000ff00000000ULL) >>  8) |	\
-	(((__u64)(x) & (__u64)0x0000ff0000000000ULL) >> 24) |	\
-	(((__u64)(x) & (__u64)0x00ff000000000000ULL) >> 40) |	\
-	(((__u64)(x) & (__u64)0xff00000000000000ULL) >> 56)))
-
-#define ___constant_swahw32(x) ((__u32)(			\
-	(((__u32)(x) & (__u32)0x0000ffffUL) << 16) |		\
-	(((__u32)(x) & (__u32)0xffff0000UL) >> 16)))
-
-#define ___constant_swahb32(x) ((__u32)(			\
-	(((__u32)(x) & (__u32)0x00ff00ffUL) << 8) |		\
-	(((__u32)(x) & (__u32)0xff00ff00UL) >> 8)))
-
-/*
- * Implement the following as inlines, but define the interface using
- * macros to allow constant folding when possible:
- * ___swab16, ___swab32, ___swab64, ___swahw32, ___swahb32
- */
-
-static inline __attribute_const__ __u16 __fswab16(__u16 val)
-{
-#ifdef __arch_swab16
-	return __arch_swab16(val);
-#else
-	return ___constant_swab16(val);
-#endif
-}
-
-static inline __attribute_const__ __u32 __fswab32(__u32 val)
-{
-#ifdef __arch_swab32
-	return __arch_swab32(val);
-#else
-	return ___constant_swab32(val);
-#endif
-}
-
-static inline __attribute_const__ __u64 __fswab64(__u64 val)
-{
-#ifdef __arch_swab64
-	return __arch_swab64(val);
-#elif defined(__SWAB_64_THRU_32__)
-	__u32 h = val >> 32;
-	__u32 l = val & ((1ULL << 32) - 1);
-	return (((__u64)__fswab32(l)) << 32) | ((__u64)(__fswab32(h)));
-#else
-	return ___constant_swab64(val);
-#endif
-}
-
-static inline __attribute_const__ __u32 __fswahw32(__u32 val)
-{
-#ifdef __arch_swahw32
-	return __arch_swahw32(val);
-#else
-	return ___constant_swahw32(val);
-#endif
-}
-
-static inline __attribute_const__ __u32 __fswahb32(__u32 val)
-{
-#ifdef __arch_swahb32
-	return __arch_swahb32(val);
-#else
-	return ___constant_swahb32(val);
-#endif
-}
-
-/**
- * __swab16 - return a byteswapped 16-bit value
- * @x: value to byteswap
- */
-#define __swab16(x)				\
-	(__builtin_constant_p((__u16)(x)) ?	\
-	___constant_swab16(x) :			\
-	__fswab16(x))
-
-/**
- * __swab32 - return a byteswapped 32-bit value
- * @x: value to byteswap
- */
-#define __swab32(x)				\
-	(__builtin_constant_p((__u32)(x)) ?	\
-	___constant_swab32(x) :			\
-	__fswab32(x))
-
-/**
- * __swab64 - return a byteswapped 64-bit value
- * @x: value to byteswap
- */
-#define __swab64(x)				\
-	(__builtin_constant_p((__u64)(x)) ?	\
-	___constant_swab64(x) :			\
-	__fswab64(x))
-
-/**
- * __swahw32 - return a word-swapped 32-bit value
- * @x: value to wordswap
- *
- * __swahw32(0x12340000) is 0x00001234
- */
-#define __swahw32(x)				\
-	(__builtin_constant_p((__u32)(x)) ?	\
-	___constant_swahw32(x) :		\
-	__fswahw32(x))
-
-/**
- * __swahb32 - return a high and low byte-swapped 32-bit value
- * @x: value to byteswap
- *
- * __swahb32(0x12345678) is 0x34127856
- */
-#define __swahb32(x)				\
-	(__builtin_constant_p((__u32)(x)) ?	\
-	___constant_swahb32(x) :		\
-	__fswahb32(x))
-
-/**
- * __swab16p - return a byteswapped 16-bit value from a pointer
- * @p: pointer to a naturally-aligned 16-bit value
- */
-static inline __u16 __swab16p(const __u16 *p)
-{
-#ifdef __arch_swab16p
-	return __arch_swab16p(p);
-#else
-	return __swab16(*p);
-#endif
-}
-
-/**
- * __swab32p - return a byteswapped 32-bit value from a pointer
- * @p: pointer to a naturally-aligned 32-bit value
- */
-static inline __u32 __swab32p(const __u32 *p)
-{
-#ifdef __arch_swab32p
-	return __arch_swab32p(p);
-#else
-	return __swab32(*p);
-#endif
-}
-
-/**
- * __swab64p - return a byteswapped 64-bit value from a pointer
- * @p: pointer to a naturally-aligned 64-bit value
- */
-static inline __u64 __swab64p(const __u64 *p)
-{
-#ifdef __arch_swab64p
-	return __arch_swab64p(p);
-#else
-	return __swab64(*p);
-#endif
-}
-
-/**
- * __swahw32p - return a wordswapped 32-bit value from a pointer
- * @p: pointer to a naturally-aligned 32-bit value
- *
- * See __swahw32() for details of wordswapping.
- */
-static inline __u32 __swahw32p(const __u32 *p)
-{
-#ifdef __arch_swahw32p
-	return __arch_swahw32p(p);
-#else
-	return __swahw32(*p);
-#endif
-}
-
-/**
- * __swahb32p - return a high and low byteswapped 32-bit value from a pointer
- * @p: pointer to a naturally-aligned 32-bit value
- *
- * See __swahb32() for details of high/low byteswapping.
- */
-static inline __u32 __swahb32p(const __u32 *p)
-{
-#ifdef __arch_swahb32p
-	return __arch_swahb32p(p);
-#else
-	return __swahb32(*p);
-#endif
-}
-
-/**
- * __swab16s - byteswap a 16-bit value in-place
- * @p: pointer to a naturally-aligned 16-bit value
- */
-static inline void __swab16s(__u16 *p)
-{
-#ifdef __arch_swab16s
-	__arch_swab16s(p);
-#else
-	*p = __swab16p(p);
-#endif
-}
-/**
- * __swab32s - byteswap a 32-bit value in-place
- * @p: pointer to a naturally-aligned 32-bit value
- */
-static inline void __swab32s(__u32 *p)
-{
-#ifdef __arch_swab32s
-	__arch_swab32s(p);
-#else
-	*p = __swab32p(p);
-#endif
-}
-
-/**
- * __swab64s - byteswap a 64-bit value in-place
- * @p: pointer to a naturally-aligned 64-bit value
- */
-static inline void __swab64s(__u64 *p)
-{
-#ifdef __arch_swab64s
-	__arch_swab64s(p);
-#else
-	*p = __swab64p(p);
-#endif
-}
-
-/**
- * __swahw32s - wordswap a 32-bit value in-place
- * @p: pointer to a naturally-aligned 32-bit value
- *
- * See __swahw32() for details of wordswapping
- */
-static inline void __swahw32s(__u32 *p)
-{
-#ifdef __arch_swahw32s
-	__arch_swahw32s(p);
-#else
-	*p = __swahw32p(p);
-#endif
-}
-
-/**
- * __swahb32s - high and low byteswap a 32-bit value in-place
- * @p: pointer to a naturally-aligned 32-bit value
- *
- * See __swahb32() for details of high and low byte swapping
- */
-static inline void __swahb32s(__u32 *p)
-{
-#ifdef __arch_swahb32s
-	__arch_swahb32s(p);
-#else
-	*p = __swahb32p(p);
-#endif
-}
-
-#ifdef __KERNEL__
-# define swab16 __swab16
-# define swab32 __swab32
-# define swab64 __swab64
-# define swahw32 __swahw32
-# define swahb32 __swahb32
-# define swab16p __swab16p
-# define swab32p __swab32p
-# define swab64p __swab64p
-# define swahw32p __swahw32p
-# define swahb32p __swahb32p
-# define swab16s __swab16s
-# define swab32s __swab32s
-# define swab64s __swab64s
-# define swahw32s __swahw32s
-# define swahb32s __swahb32s
-#endif /* __KERNEL__ */
-
-#endif /* _LINUX_SWAB_H */
diff --git a/ANDROID_3.4.5/include/linux/swap.h b/ANDROID_3.4.5/include/linux/swap.h
deleted file mode 100644
index b1fd5c79..00000000
--- a/ANDROID_3.4.5/include/linux/swap.h
+++ /dev/null
@@ -1,512 +0,0 @@
-#ifndef _LINUX_SWAP_H
-#define _LINUX_SWAP_H
-
-#include <linux/spinlock.h>
-#include <linux/linkage.h>
-#include <linux/mmzone.h>
-#include <linux/list.h>
-#include <linux/memcontrol.h>
-#include <linux/sched.h>
-#include <linux/node.h>
-
-#include <linux/atomic.h>
-#include <asm/page.h>
-
-struct notifier_block;
-
-struct bio;
-
-#define SWAP_FLAG_PREFER	0x8000	/* set if swap priority specified */
-#define SWAP_FLAG_PRIO_MASK	0x7fff
-#define SWAP_FLAG_PRIO_SHIFT	0
-#define SWAP_FLAG_DISCARD	0x10000 /* discard swap cluster after use */
-
-#define SWAP_FLAGS_VALID	(SWAP_FLAG_PRIO_MASK | SWAP_FLAG_PREFER | \
-				 SWAP_FLAG_DISCARD)
-
-static inline int current_is_kswapd(void)
-{
-	return current->flags & PF_KSWAPD;
-}
-
-/*
- * MAX_SWAPFILES defines the maximum number of swaptypes: things which can
- * be swapped to.  The swap type and the offset into that swap type are
- * encoded into pte's and into pgoff_t's in the swapcache.  Using five bits
- * for the type means that the maximum number of swapcache pages is 27 bits
- * on 32-bit-pgoff_t architectures.  And that assumes that the architecture packs
- * the type/offset into the pte as 5/27 as well.
- */
-#define MAX_SWAPFILES_SHIFT	5
-
-/*
- * Use some of the swap files numbers for other purposes. This
- * is a convenient way to hook into the VM to trigger special
- * actions on faults.
- */
-
-/*
- * NUMA node memory migration support
- */
-#ifdef CONFIG_MIGRATION
-#define SWP_MIGRATION_NUM 2
-#define SWP_MIGRATION_READ	(MAX_SWAPFILES + SWP_HWPOISON_NUM)
-#define SWP_MIGRATION_WRITE	(MAX_SWAPFILES + SWP_HWPOISON_NUM + 1)
-#else
-#define SWP_MIGRATION_NUM 0
-#endif
-
-/*
- * Handling of hardware poisoned pages with memory corruption.
- */
-#ifdef CONFIG_MEMORY_FAILURE
-#define SWP_HWPOISON_NUM 1
-#define SWP_HWPOISON		MAX_SWAPFILES
-#else
-#define SWP_HWPOISON_NUM 0
-#endif
-
-#define MAX_SWAPFILES \
-	((1 << MAX_SWAPFILES_SHIFT) - SWP_MIGRATION_NUM - SWP_HWPOISON_NUM)
-
-/*
- * Magic header for a swap area. The first part of the union is
- * what the swap magic looks like for the old (limited to 128MB)
- * swap area format, the second part of the union adds - in the
- * old reserved area - some extra information. Note that the first
- * kilobyte is reserved for boot loader or disk label stuff...
- *
- * Having the magic at the end of the PAGE_SIZE makes detecting swap
- * areas somewhat tricky on machines that support multiple page sizes.
- * For 2.5 we'll probably want to move the magic to just beyond the
- * bootbits...
- */
-union swap_header {
-	struct {
-		char reserved[PAGE_SIZE - 10];
-		char magic[10];			/* SWAP-SPACE or SWAPSPACE2 */
-	} magic;
-	struct {
-		char		bootbits[1024];	/* Space for disklabel etc. */
-		__u32		version;
-		__u32		last_page;
-		__u32		nr_badpages;
-		unsigned char	sws_uuid[16];
-		unsigned char	sws_volume[16];
-		__u32		padding[117];
-		__u32		badpages[1];
-	} info;
-};
-
- /* A swap entry has to fit into a "unsigned long", as
-  * the entry is hidden in the "index" field of the
-  * swapper address space.
-  */
-typedef struct {
-	unsigned long val;
-} swp_entry_t;
-
-/*
- * current->reclaim_state points to one of these when a task is running
- * memory reclaim
- */
-struct reclaim_state {
-	unsigned long reclaimed_slab;
-};
-
-#ifdef __KERNEL__
-
-struct address_space;
-struct sysinfo;
-struct writeback_control;
-struct zone;
-
-/*
- * A swap extent maps a range of a swapfile's PAGE_SIZE pages onto a range of
- * disk blocks.  A list of swap extents maps the entire swapfile.  (Where the
- * term `swapfile' refers to either a blockdevice or an IS_REG file.  Apart
- * from setup, they're handled identically.
- *
- * We always assume that blocks are of size PAGE_SIZE.
- */
-struct swap_extent {
-	struct list_head list;
-	pgoff_t start_page;
-	pgoff_t nr_pages;
-	sector_t start_block;
-};
-
-/*
- * Max bad pages in the new format..
- */
-#define __swapoffset(x) ((unsigned long)&((union swap_header *)0)->x)
-#define MAX_SWAP_BADPAGES \
-	((__swapoffset(magic.magic) - __swapoffset(info.badpages)) / sizeof(int))
-
-enum {
-	SWP_USED	= (1 << 0),	/* is slot in swap_info[] used? */
-	SWP_WRITEOK	= (1 << 1),	/* ok to write to this swap?	*/
-	SWP_DISCARDABLE = (1 << 2),	/* swapon+blkdev support discard */
-	SWP_DISCARDING	= (1 << 3),	/* now discarding a free cluster */
-	SWP_SOLIDSTATE	= (1 << 4),	/* blkdev seeks are cheap */
-	SWP_CONTINUED	= (1 << 5),	/* swap_map has count continuation */
-	SWP_BLKDEV	= (1 << 6),	/* its a block device */
-					/* add others here before... */
-	SWP_SCANNING	= (1 << 8),	/* refcount in scan_swap_map */
-};
-
-#define SWAP_CLUSTER_MAX 32
-#define COMPACT_CLUSTER_MAX SWAP_CLUSTER_MAX
-
-/*
- * Ratio between the present memory in the zone and the "gap" that
- * we're allowing kswapd to shrink in addition to the per-zone high
- * wmark, even for zones that already have the high wmark satisfied,
- * in order to provide better per-zone lru behavior. We are ok to
- * spend not more than 1% of the memory for this zone balancing "gap".
- */
-#define KSWAPD_ZONE_BALANCE_GAP_RATIO 100
-
-#define SWAP_MAP_MAX	0x3e	/* Max duplication count, in first swap_map */
-#define SWAP_MAP_BAD	0x3f	/* Note pageblock is bad, in first swap_map */
-#define SWAP_HAS_CACHE	0x40	/* Flag page is cached, in first swap_map */
-#define SWAP_CONT_MAX	0x7f	/* Max count, in each swap_map continuation */
-#define COUNT_CONTINUED	0x80	/* See swap_map continuation for full count */
-#define SWAP_MAP_SHMEM	0xbf	/* Owned by shmem/tmpfs, in first swap_map */
-
-/*
- * The in-memory structure used to track swap areas.
- */
-struct swap_info_struct {
-	unsigned long	flags;		/* SWP_USED etc: see above */
-	signed short	prio;		/* swap priority of this type */
-	signed char	type;		/* strange name for an index */
-	signed char	next;		/* next type on the swap list */
-	unsigned int	max;		/* extent of the swap_map */
-	unsigned char *swap_map;	/* vmalloc'ed array of usage counts */
-	unsigned int lowest_bit;	/* index of first free in swap_map */
-	unsigned int highest_bit;	/* index of last free in swap_map */
-	unsigned int pages;		/* total of usable pages of swap */
-	unsigned int inuse_pages;	/* number of those currently in use */
-	unsigned int cluster_next;	/* likely index for next allocation */
-	unsigned int cluster_nr;	/* countdown to next cluster search */
-	unsigned int lowest_alloc;	/* while preparing discard cluster */
-	unsigned int highest_alloc;	/* while preparing discard cluster */
-	struct swap_extent *curr_swap_extent;
-	struct swap_extent first_swap_extent;
-	struct block_device *bdev;	/* swap device or bdev of swap file */
-	struct file *swap_file;		/* seldom referenced */
-	unsigned int old_block_size;	/* seldom referenced */
-};
-
-struct swap_list_t {
-	int head;	/* head of priority-ordered swapfile list */
-	int next;	/* swapfile to be used next */
-};
-
-/* Swap 50% full? Release swapcache more aggressively.. */
-#define vm_swap_full() (nr_swap_pages*2 < total_swap_pages)
-
-/* linux/mm/page_alloc.c */
-extern unsigned long totalram_pages;
-extern unsigned long totalreserve_pages;
-extern unsigned long dirty_balance_reserve;
-extern unsigned int nr_free_buffer_pages(void);
-extern unsigned int nr_free_pagecache_pages(void);
-
-/* Definition of global_page_state not available yet */
-#define nr_free_pages() global_page_state(NR_FREE_PAGES)
-
-
-/* linux/mm/swap.c */
-extern void __lru_cache_add(struct page *, enum lru_list lru);
-extern void lru_cache_add_lru(struct page *, enum lru_list lru);
-extern void lru_add_page_tail(struct zone* zone,
-			      struct page *page, struct page *page_tail);
-extern void activate_page(struct page *);
-extern void mark_page_accessed(struct page *);
-extern void lru_add_drain(void);
-extern void lru_add_drain_cpu(int cpu);
-extern int lru_add_drain_all(void);
-extern void rotate_reclaimable_page(struct page *page);
-extern void deactivate_page(struct page *page);
-extern void swap_setup(void);
-
-extern void add_page_to_unevictable_list(struct page *page);
-
-/**
- * lru_cache_add: add a page to the page lists
- * @page: the page to add
- */
-static inline void lru_cache_add_anon(struct page *page)
-{
-	__lru_cache_add(page, LRU_INACTIVE_ANON);
-}
-
-static inline void lru_cache_add_file(struct page *page)
-{
-	__lru_cache_add(page, LRU_INACTIVE_FILE);
-}
-
-/* linux/mm/vmscan.c */
-extern unsigned long try_to_free_pages(struct zonelist *zonelist, int order,
-					gfp_t gfp_mask, nodemask_t *mask);
-extern int __isolate_lru_page(struct page *page, isolate_mode_t mode, int file);
-extern unsigned long try_to_free_mem_cgroup_pages(struct mem_cgroup *mem,
-						  gfp_t gfp_mask, bool noswap);
-extern unsigned long mem_cgroup_shrink_node_zone(struct mem_cgroup *mem,
-						gfp_t gfp_mask, bool noswap,
-						struct zone *zone,
-						unsigned long *nr_scanned);
-extern unsigned long shrink_all_memory(unsigned long nr_pages);
-extern int vm_swappiness;
-extern int remove_mapping(struct address_space *mapping, struct page *page);
-extern long vm_total_pages;
-
-#ifdef CONFIG_NUMA
-extern int zone_reclaim_mode;
-extern int sysctl_min_unmapped_ratio;
-extern int sysctl_min_slab_ratio;
-extern int zone_reclaim(struct zone *, gfp_t, unsigned int);
-#else
-#define zone_reclaim_mode 0
-static inline int zone_reclaim(struct zone *z, gfp_t mask, unsigned int order)
-{
-	return 0;
-}
-#endif
-
-extern int page_evictable(struct page *page, struct vm_area_struct *vma);
-extern void check_move_unevictable_pages(struct page **, int nr_pages);
-
-extern unsigned long scan_unevictable_pages;
-extern int scan_unevictable_handler(struct ctl_table *, int,
-					void __user *, size_t *, loff_t *);
-#ifdef CONFIG_NUMA
-extern int scan_unevictable_register_node(struct node *node);
-extern void scan_unevictable_unregister_node(struct node *node);
-#else
-static inline int scan_unevictable_register_node(struct node *node)
-{
-	return 0;
-}
-static inline void scan_unevictable_unregister_node(struct node *node)
-{
-}
-#endif
-
-extern int kswapd_run(int nid);
-extern void kswapd_stop(int nid);
-#ifdef CONFIG_CGROUP_MEM_RES_CTLR
-extern int mem_cgroup_swappiness(struct mem_cgroup *mem);
-#else
-static inline int mem_cgroup_swappiness(struct mem_cgroup *mem)
-{
-	return vm_swappiness;
-}
-#endif
-#ifdef CONFIG_CGROUP_MEM_RES_CTLR_SWAP
-extern void mem_cgroup_uncharge_swap(swp_entry_t ent);
-#else
-static inline void mem_cgroup_uncharge_swap(swp_entry_t ent)
-{
-}
-#endif
-#ifdef CONFIG_SWAP
-/* linux/mm/page_io.c */
-extern int swap_readpage(struct page *);
-extern int swap_writepage(struct page *page, struct writeback_control *wbc);
-extern void end_swap_bio_read(struct bio *bio, int err);
-
-/* linux/mm/swap_state.c */
-extern struct address_space swapper_space;
-#define total_swapcache_pages  swapper_space.nrpages
-extern void show_swap_cache_info(void);
-extern int add_to_swap(struct page *);
-extern int add_to_swap_cache(struct page *, swp_entry_t, gfp_t);
-extern void __delete_from_swap_cache(struct page *);
-extern void delete_from_swap_cache(struct page *);
-extern void free_page_and_swap_cache(struct page *);
-extern void free_pages_and_swap_cache(struct page **, int);
-extern struct page *lookup_swap_cache(swp_entry_t);
-extern struct page *read_swap_cache_async(swp_entry_t, gfp_t,
-			struct vm_area_struct *vma, unsigned long addr);
-extern struct page *swapin_readahead(swp_entry_t, gfp_t,
-			struct vm_area_struct *vma, unsigned long addr);
-
-/* linux/mm/swapfile.c */
-extern long nr_swap_pages;
-extern long total_swap_pages;
-extern void si_swapinfo(struct sysinfo *);
-extern swp_entry_t get_swap_page(void);
-extern swp_entry_t get_swap_page_of_type(int);
-extern int add_swap_count_continuation(swp_entry_t, gfp_t);
-extern void swap_shmem_alloc(swp_entry_t);
-extern int swap_duplicate(swp_entry_t);
-extern int swapcache_prepare(swp_entry_t);
-extern void swap_free(swp_entry_t);
-extern void swapcache_free(swp_entry_t, struct page *page);
-extern int free_swap_and_cache(swp_entry_t);
-extern int swap_type_of(dev_t, sector_t, struct block_device **);
-extern unsigned int count_swap_pages(int, int);
-extern sector_t map_swap_page(struct page *, struct block_device **);
-extern sector_t swapdev_block(int, pgoff_t);
-extern int reuse_swap_page(struct page *);
-extern int try_to_free_swap(struct page *);
-struct backing_dev_info;
-
-/* linux/mm/thrash.c */
-extern struct mm_struct *swap_token_mm;
-extern void grab_swap_token(struct mm_struct *);
-extern void __put_swap_token(struct mm_struct *);
-extern void disable_swap_token(struct mem_cgroup *memcg);
-
-static inline int has_swap_token(struct mm_struct *mm)
-{
-	return (mm == swap_token_mm);
-}
-
-static inline void put_swap_token(struct mm_struct *mm)
-{
-	if (has_swap_token(mm))
-		__put_swap_token(mm);
-}
-
-#ifdef CONFIG_CGROUP_MEM_RES_CTLR
-extern void
-mem_cgroup_uncharge_swapcache(struct page *page, swp_entry_t ent, bool swapout);
-extern int mem_cgroup_count_swap_user(swp_entry_t ent, struct page **pagep);
-#else
-static inline void
-mem_cgroup_uncharge_swapcache(struct page *page, swp_entry_t ent, bool swapout)
-{
-}
-#endif
-
-#else /* CONFIG_SWAP */
-
-#define nr_swap_pages				0L
-#define total_swap_pages			0L
-#define total_swapcache_pages			0UL
-
-#define si_swapinfo(val) \
-	do { (val)->freeswap = (val)->totalswap = 0; } while (0)
-/* only sparc can not include linux/pagemap.h in this file
- * so leave page_cache_release and release_pages undeclared... */
-#define free_page_and_swap_cache(page) \
-	page_cache_release(page)
-#define free_pages_and_swap_cache(pages, nr) \
-	release_pages((pages), (nr), 0);
-
-static inline void show_swap_cache_info(void)
-{
-}
-
-#define free_swap_and_cache(swp)	is_migration_entry(swp)
-#define swapcache_prepare(swp)		is_migration_entry(swp)
-
-static inline int add_swap_count_continuation(swp_entry_t swp, gfp_t gfp_mask)
-{
-	return 0;
-}
-
-static inline void swap_shmem_alloc(swp_entry_t swp)
-{
-}
-
-static inline int swap_duplicate(swp_entry_t swp)
-{
-	return 0;
-}
-
-static inline void swap_free(swp_entry_t swp)
-{
-}
-
-static inline void swapcache_free(swp_entry_t swp, struct page *page)
-{
-}
-
-static inline struct page *swapin_readahead(swp_entry_t swp, gfp_t gfp_mask,
-			struct vm_area_struct *vma, unsigned long addr)
-{
-	return NULL;
-}
-
-static inline int swap_writepage(struct page *p, struct writeback_control *wbc)
-{
-	return 0;
-}
-
-static inline struct page *lookup_swap_cache(swp_entry_t swp)
-{
-	return NULL;
-}
-
-static inline int add_to_swap(struct page *page)
-{
-	return 0;
-}
-
-static inline int add_to_swap_cache(struct page *page, swp_entry_t entry,
-							gfp_t gfp_mask)
-{
-	return -1;
-}
-
-static inline void __delete_from_swap_cache(struct page *page)
-{
-}
-
-static inline void delete_from_swap_cache(struct page *page)
-{
-}
-
-#define reuse_swap_page(page)	(page_mapcount(page) == 1)
-
-static inline int try_to_free_swap(struct page *page)
-{
-	return 0;
-}
-
-static inline swp_entry_t get_swap_page(void)
-{
-	swp_entry_t entry;
-	entry.val = 0;
-	return entry;
-}
-
-/* linux/mm/thrash.c */
-static inline void put_swap_token(struct mm_struct *mm)
-{
-}
-
-static inline void grab_swap_token(struct mm_struct *mm)
-{
-}
-
-static inline int has_swap_token(struct mm_struct *mm)
-{
-	return 0;
-}
-
-static inline void disable_swap_token(struct mem_cgroup *memcg)
-{
-}
-
-static inline void
-mem_cgroup_uncharge_swapcache(struct page *page, swp_entry_t ent)
-{
-}
-
-#ifdef CONFIG_CGROUP_MEM_RES_CTLR
-static inline int
-mem_cgroup_count_swap_user(swp_entry_t ent, struct page **pagep)
-{
-	return 0;
-}
-#endif
-
-#endif /* CONFIG_SWAP */
-#endif /* __KERNEL__*/
-#endif /* _LINUX_SWAP_H */
diff --git a/ANDROID_3.4.5/include/linux/swapops.h b/ANDROID_3.4.5/include/linux/swapops.h
deleted file mode 100644
index 47ead515..00000000
--- a/ANDROID_3.4.5/include/linux/swapops.h
+++ /dev/null
@@ -1,197 +0,0 @@
-#ifndef _LINUX_SWAPOPS_H
-#define _LINUX_SWAPOPS_H
-
-#include <linux/radix-tree.h>
-#include <linux/bug.h>
-
-/*
- * swapcache pages are stored in the swapper_space radix tree.  We want to
- * get good packing density in that tree, so the index should be dense in
- * the low-order bits.
- *
- * We arrange the `type' and `offset' fields so that `type' is at the seven
- * high-order bits of the swp_entry_t and `offset' is right-aligned in the
- * remaining bits.  Although `type' itself needs only five bits, we allow for
- * shmem/tmpfs to shift it all up a further two bits: see swp_to_radix_entry().
- *
- * swp_entry_t's are *never* stored anywhere in their arch-dependent format.
- */
-#define SWP_TYPE_SHIFT(e)	((sizeof(e.val) * 8) - \
-			(MAX_SWAPFILES_SHIFT + RADIX_TREE_EXCEPTIONAL_SHIFT))
-#define SWP_OFFSET_MASK(e)	((1UL << SWP_TYPE_SHIFT(e)) - 1)
-
-/*
- * Store a type+offset into a swp_entry_t in an arch-independent format
- */
-static inline swp_entry_t swp_entry(unsigned long type, pgoff_t offset)
-{
-	swp_entry_t ret;
-
-	ret.val = (type << SWP_TYPE_SHIFT(ret)) |
-			(offset & SWP_OFFSET_MASK(ret));
-	return ret;
-}
-
-/*
- * Extract the `type' field from a swp_entry_t.  The swp_entry_t is in
- * arch-independent format
- */
-static inline unsigned swp_type(swp_entry_t entry)
-{
-	return (entry.val >> SWP_TYPE_SHIFT(entry));
-}
-
-/*
- * Extract the `offset' field from a swp_entry_t.  The swp_entry_t is in
- * arch-independent format
- */
-static inline pgoff_t swp_offset(swp_entry_t entry)
-{
-	return entry.val & SWP_OFFSET_MASK(entry);
-}
-
-#ifdef CONFIG_MMU
-/* check whether a pte points to a swap entry */
-static inline int is_swap_pte(pte_t pte)
-{
-	return !pte_none(pte) && !pte_present(pte) && !pte_file(pte);
-}
-#endif
-
-/*
- * Convert the arch-dependent pte representation of a swp_entry_t into an
- * arch-independent swp_entry_t.
- */
-static inline swp_entry_t pte_to_swp_entry(pte_t pte)
-{
-	swp_entry_t arch_entry;
-
-	BUG_ON(pte_file(pte));
-	arch_entry = __pte_to_swp_entry(pte);
-	return swp_entry(__swp_type(arch_entry), __swp_offset(arch_entry));
-}
-
-/*
- * Convert the arch-independent representation of a swp_entry_t into the
- * arch-dependent pte representation.
- */
-static inline pte_t swp_entry_to_pte(swp_entry_t entry)
-{
-	swp_entry_t arch_entry;
-
-	arch_entry = __swp_entry(swp_type(entry), swp_offset(entry));
-	BUG_ON(pte_file(__swp_entry_to_pte(arch_entry)));
-	return __swp_entry_to_pte(arch_entry);
-}
-
-static inline swp_entry_t radix_to_swp_entry(void *arg)
-{
-	swp_entry_t entry;
-
-	entry.val = (unsigned long)arg >> RADIX_TREE_EXCEPTIONAL_SHIFT;
-	return entry;
-}
-
-static inline void *swp_to_radix_entry(swp_entry_t entry)
-{
-	unsigned long value;
-
-	value = entry.val << RADIX_TREE_EXCEPTIONAL_SHIFT;
-	return (void *)(value | RADIX_TREE_EXCEPTIONAL_ENTRY);
-}
-
-#ifdef CONFIG_MIGRATION
-static inline swp_entry_t make_migration_entry(struct page *page, int write)
-{
-	BUG_ON(!PageLocked(page));
-	return swp_entry(write ? SWP_MIGRATION_WRITE : SWP_MIGRATION_READ,
-			page_to_pfn(page));
-}
-
-static inline int is_migration_entry(swp_entry_t entry)
-{
-	return unlikely(swp_type(entry) == SWP_MIGRATION_READ ||
-			swp_type(entry) == SWP_MIGRATION_WRITE);
-}
-
-static inline int is_write_migration_entry(swp_entry_t entry)
-{
-	return unlikely(swp_type(entry) == SWP_MIGRATION_WRITE);
-}
-
-static inline struct page *migration_entry_to_page(swp_entry_t entry)
-{
-	struct page *p = pfn_to_page(swp_offset(entry));
-	/*
-	 * Any use of migration entries may only occur while the
-	 * corresponding page is locked
-	 */
-	BUG_ON(!PageLocked(p));
-	return p;
-}
-
-static inline void make_migration_entry_read(swp_entry_t *entry)
-{
-	*entry = swp_entry(SWP_MIGRATION_READ, swp_offset(*entry));
-}
-
-extern void migration_entry_wait(struct mm_struct *mm, pmd_t *pmd,
-					unsigned long address);
-#else
-
-#define make_migration_entry(page, write) swp_entry(0, 0)
-static inline int is_migration_entry(swp_entry_t swp)
-{
-	return 0;
-}
-#define migration_entry_to_page(swp) NULL
-static inline void make_migration_entry_read(swp_entry_t *entryp) { }
-static inline void migration_entry_wait(struct mm_struct *mm, pmd_t *pmd,
-					 unsigned long address) { }
-static inline int is_write_migration_entry(swp_entry_t entry)
-{
-	return 0;
-}
-
-#endif
-
-#ifdef CONFIG_MEMORY_FAILURE
-/*
- * Support for hardware poisoned pages
- */
-static inline swp_entry_t make_hwpoison_entry(struct page *page)
-{
-	BUG_ON(!PageLocked(page));
-	return swp_entry(SWP_HWPOISON, page_to_pfn(page));
-}
-
-static inline int is_hwpoison_entry(swp_entry_t entry)
-{
-	return swp_type(entry) == SWP_HWPOISON;
-}
-#else
-
-static inline swp_entry_t make_hwpoison_entry(struct page *page)
-{
-	return swp_entry(0, 0);
-}
-
-static inline int is_hwpoison_entry(swp_entry_t swp)
-{
-	return 0;
-}
-#endif
-
-#if defined(CONFIG_MEMORY_FAILURE) || defined(CONFIG_MIGRATION)
-static inline int non_swap_entry(swp_entry_t entry)
-{
-	return swp_type(entry) >= MAX_SWAPFILES;
-}
-#else
-static inline int non_swap_entry(swp_entry_t entry)
-{
-	return 0;
-}
-#endif
-
-#endif /* _LINUX_SWAPOPS_H */
diff --git a/ANDROID_3.4.5/include/linux/swiotlb.h b/ANDROID_3.4.5/include/linux/swiotlb.h
deleted file mode 100644
index e872526f..00000000
--- a/ANDROID_3.4.5/include/linux/swiotlb.h
+++ /dev/null
@@ -1,113 +0,0 @@
-#ifndef __LINUX_SWIOTLB_H
-#define __LINUX_SWIOTLB_H
-
-#include <linux/types.h>
-
-struct device;
-struct dma_attrs;
-struct scatterlist;
-
-extern int swiotlb_force;
-
-/*
- * Maximum allowable number of contiguous slabs to map,
- * must be a power of 2.  What is the appropriate value ?
- * The complexity of {map,unmap}_single is linearly dependent on this value.
- */
-#define IO_TLB_SEGSIZE	128
-
-/*
- * log of the size of each IO TLB slab.  The number of slabs is command line
- * controllable.
- */
-#define IO_TLB_SHIFT 11
-
-extern void swiotlb_init(int verbose);
-extern void swiotlb_init_with_tbl(char *tlb, unsigned long nslabs, int verbose);
-extern unsigned long swiotlb_nr_tbl(void);
-
-/*
- * Enumeration for sync targets
- */
-enum dma_sync_target {
-	SYNC_FOR_CPU = 0,
-	SYNC_FOR_DEVICE = 1,
-};
-extern void *swiotlb_tbl_map_single(struct device *hwdev, dma_addr_t tbl_dma_addr,
-				    phys_addr_t phys, size_t size,
-				    enum dma_data_direction dir);
-
-extern void swiotlb_tbl_unmap_single(struct device *hwdev, char *dma_addr,
-				     size_t size, enum dma_data_direction dir);
-
-extern void swiotlb_tbl_sync_single(struct device *hwdev, char *dma_addr,
-				    size_t size, enum dma_data_direction dir,
-				    enum dma_sync_target target);
-
-/* Accessory functions. */
-extern void swiotlb_bounce(phys_addr_t phys, char *dma_addr, size_t size,
-			   enum dma_data_direction dir);
-
-extern void
-*swiotlb_alloc_coherent(struct device *hwdev, size_t size,
-			dma_addr_t *dma_handle, gfp_t flags);
-
-extern void
-swiotlb_free_coherent(struct device *hwdev, size_t size,
-		      void *vaddr, dma_addr_t dma_handle);
-
-extern dma_addr_t swiotlb_map_page(struct device *dev, struct page *page,
-				   unsigned long offset, size_t size,
-				   enum dma_data_direction dir,
-				   struct dma_attrs *attrs);
-extern void swiotlb_unmap_page(struct device *hwdev, dma_addr_t dev_addr,
-			       size_t size, enum dma_data_direction dir,
-			       struct dma_attrs *attrs);
-
-extern int
-swiotlb_map_sg(struct device *hwdev, struct scatterlist *sg, int nents,
-	       enum dma_data_direction dir);
-
-extern void
-swiotlb_unmap_sg(struct device *hwdev, struct scatterlist *sg, int nents,
-		 enum dma_data_direction dir);
-
-extern int
-swiotlb_map_sg_attrs(struct device *hwdev, struct scatterlist *sgl, int nelems,
-		     enum dma_data_direction dir, struct dma_attrs *attrs);
-
-extern void
-swiotlb_unmap_sg_attrs(struct device *hwdev, struct scatterlist *sgl,
-		       int nelems, enum dma_data_direction dir,
-		       struct dma_attrs *attrs);
-
-extern void
-swiotlb_sync_single_for_cpu(struct device *hwdev, dma_addr_t dev_addr,
-			    size_t size, enum dma_data_direction dir);
-
-extern void
-swiotlb_sync_sg_for_cpu(struct device *hwdev, struct scatterlist *sg,
-			int nelems, enum dma_data_direction dir);
-
-extern void
-swiotlb_sync_single_for_device(struct device *hwdev, dma_addr_t dev_addr,
-			       size_t size, enum dma_data_direction dir);
-
-extern void
-swiotlb_sync_sg_for_device(struct device *hwdev, struct scatterlist *sg,
-			   int nelems, enum dma_data_direction dir);
-
-extern int
-swiotlb_dma_mapping_error(struct device *hwdev, dma_addr_t dma_addr);
-
-extern int
-swiotlb_dma_supported(struct device *hwdev, u64 mask);
-
-#ifdef CONFIG_SWIOTLB
-extern void __init swiotlb_free(void);
-#else
-static inline void swiotlb_free(void) { }
-#endif
-
-extern void swiotlb_print_info(void);
-#endif /* __LINUX_SWIOTLB_H */
diff --git a/ANDROID_3.4.5/include/linux/switch.h b/ANDROID_3.4.5/include/linux/switch.h
deleted file mode 100644
index 3e4c748e..00000000
--- a/ANDROID_3.4.5/include/linux/switch.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- *  Switch class driver
- *
- * Copyright (C) 2008 Google, Inc.
- * Author: Mike Lockwood <lockwood@android.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
-*/
-
-#ifndef __LINUX_SWITCH_H__
-#define __LINUX_SWITCH_H__
-
-struct switch_dev {
-	const char	*name;
-	struct device	*dev;
-	int		index;
-	int		state;
-
-	ssize_t	(*print_name)(struct switch_dev *sdev, char *buf);
-	ssize_t	(*print_state)(struct switch_dev *sdev, char *buf);
-};
-
-struct gpio_switch_platform_data {
-	const char *name;
-	unsigned 	gpio;
-
-	/* if NULL, switch_dev.name will be printed */
-	const char *name_on;
-	const char *name_off;
-	/* if NULL, "0" or "1" will be printed */
-	const char *state_on;
-	const char *state_off;
-};
-
-extern int switch_dev_register(struct switch_dev *sdev);
-extern void switch_dev_unregister(struct switch_dev *sdev);
-
-static inline int switch_get_state(struct switch_dev *sdev)
-{
-	return sdev->state;
-}
-
-extern void switch_set_state(struct switch_dev *sdev, int state);
-
-#endif /* __LINUX_SWITCH_H__ */
diff --git a/ANDROID_3.4.5/include/linux/synaptics_i2c_rmi.h b/ANDROID_3.4.5/include/linux/synaptics_i2c_rmi.h
deleted file mode 100644
index 5539cc52..00000000
--- a/ANDROID_3.4.5/include/linux/synaptics_i2c_rmi.h
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * include/linux/synaptics_i2c_rmi.h - platform data structure for f75375s sensor
- *
- * Copyright (C) 2008 Google, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef _LINUX_SYNAPTICS_I2C_RMI_H
-#define _LINUX_SYNAPTICS_I2C_RMI_H
-
-#define SYNAPTICS_I2C_RMI_NAME "synaptics-rmi-ts"
-
-enum {
-	SYNAPTICS_FLIP_X = 1UL << 0,
-	SYNAPTICS_FLIP_Y = 1UL << 1,
-	SYNAPTICS_SWAP_XY = 1UL << 2,
-	SYNAPTICS_SNAP_TO_INACTIVE_EDGE = 1UL << 3,
-};
-
-struct synaptics_i2c_rmi_platform_data {
-	uint32_t version;	/* Use this entry for panels with */
-				/* (major << 8 | minor) version or above. */
-				/* If non-zero another array entry follows */
-	int (*power)(int on);	/* Only valid in first array entry */
-	uint32_t flags;
-	unsigned long irqflags;
-	uint32_t inactive_left; /* 0x10000 = screen width */
-	uint32_t inactive_right; /* 0x10000 = screen width */
-	uint32_t inactive_top; /* 0x10000 = screen height */
-	uint32_t inactive_bottom; /* 0x10000 = screen height */
-	uint32_t snap_left_on; /* 0x10000 = screen width */
-	uint32_t snap_left_off; /* 0x10000 = screen width */
-	uint32_t snap_right_on; /* 0x10000 = screen width */
-	uint32_t snap_right_off; /* 0x10000 = screen width */
-	uint32_t snap_top_on; /* 0x10000 = screen height */
-	uint32_t snap_top_off; /* 0x10000 = screen height */
-	uint32_t snap_bottom_on; /* 0x10000 = screen height */
-	uint32_t snap_bottom_off; /* 0x10000 = screen height */
-	uint32_t fuzz_x; /* 0x10000 = screen width */
-	uint32_t fuzz_y; /* 0x10000 = screen height */
-	int fuzz_p;
-	int fuzz_w;
-	int8_t sensitivity_adjust;
-};
-
-#endif /* _LINUX_SYNAPTICS_I2C_RMI_H */
diff --git a/ANDROID_3.4.5/include/linux/sync.h b/ANDROID_3.4.5/include/linux/sync.h
deleted file mode 100644
index 38ea986d..00000000
--- a/ANDROID_3.4.5/include/linux/sync.h
+++ /dev/null
@@ -1,426 +0,0 @@
-/*
- * include/linux/sync.h
- *
- * Copyright (C) 2012 Google, Inc.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef _LINUX_SYNC_H
-#define _LINUX_SYNC_H
-
-#include <linux/types.h>
-#ifdef __KERNEL__
-
-#include <linux/kref.h>
-#include <linux/ktime.h>
-#include <linux/list.h>
-#include <linux/spinlock.h>
-#include <linux/wait.h>
-
-struct sync_timeline;
-struct sync_pt;
-struct sync_fence;
-
-/**
- * struct sync_timeline_ops - sync object implementation ops
- * @driver_name:	name of the implentation
- * @dup:		duplicate a sync_pt
- * @has_signaled:	returns:
- *			  1 if pt has signaled
- *			  0 if pt has not signaled
- *			 <0 on error
- * @compare:		returns:
- *			  1 if b will signal before a
- *			  0 if a and b will signal at the same time
- *			 -1 if a will signabl before b
- * @free_pt:		called before sync_pt is freed
- * @release_obj:	called before sync_timeline is freed
- * @print_obj:		deprecated
- * @print_pt:		deprecated
- * @fill_driver_data:	write implmentation specific driver data to data.
- *			  should return an error if there is not enough room
- *			  as specified by size.  This information is returned
- *			  to userspace by SYNC_IOC_FENCE_INFO.
- * @timeline_value_str: fill str with the value of the sync_timeline's counter
- * @pt_value_str:	fill str with the value of the sync_pt
- */
-struct sync_timeline_ops {
-	const char *driver_name;
-
-	/* required */
-	struct sync_pt *(*dup)(struct sync_pt *pt);
-
-	/* required */
-	int (*has_signaled)(struct sync_pt *pt);
-
-	/* required */
-	int (*compare)(struct sync_pt *a, struct sync_pt *b);
-
-	/* optional */
-	void (*free_pt)(struct sync_pt *sync_pt);
-
-	/* optional */
-	void (*release_obj)(struct sync_timeline *sync_timeline);
-
-	/* deprecated */
-	void (*print_obj)(struct seq_file *s,
-			  struct sync_timeline *sync_timeline);
-
-	/* deprecated */
-	void (*print_pt)(struct seq_file *s, struct sync_pt *sync_pt);
-
-	/* optional */
-	int (*fill_driver_data)(struct sync_pt *syncpt, void *data, int size);
-
-	/* optional */
-	void (*timeline_value_str)(struct sync_timeline *timeline, char *str,
-				   int size);
-
-	/* optional */
-	void (*pt_value_str)(struct sync_pt *pt, char *str, int size);
-};
-
-/**
- * struct sync_timeline - sync object
- * @kref:		reference count on fence.
- * @ops:		ops that define the implementaiton of the sync_timeline
- * @name:		name of the sync_timeline. Useful for debugging
- * @destoryed:		set when sync_timeline is destroyed
- * @child_list_head:	list of children sync_pts for this sync_timeline
- * @child_list_lock:	lock protecting @child_list_head, destroyed, and
- *			  sync_pt.status
- * @active_list_head:	list of active (unsignaled/errored) sync_pts
- * @sync_timeline_list:	membership in global sync_timeline_list
- */
-struct sync_timeline {
-	struct kref		kref;
-	const struct sync_timeline_ops	*ops;
-	char			name[32];
-
-	/* protected by child_list_lock */
-	bool			destroyed;
-
-	struct list_head	child_list_head;
-	spinlock_t		child_list_lock;
-
-	struct list_head	active_list_head;
-	spinlock_t		active_list_lock;
-
-	struct list_head	sync_timeline_list;
-};
-
-/**
- * struct sync_pt - sync point
- * @parent:		sync_timeline to which this sync_pt belongs
- * @child_list:		membership in sync_timeline.child_list_head
- * @active_list:	membership in sync_timeline.active_list_head
- * @signaled_list:	membership in temorary signaled_list on stack
- * @fence:		sync_fence to which the sync_pt belongs
- * @pt_list:		membership in sync_fence.pt_list_head
- * @status:		1: signaled, 0:active, <0: error
- * @timestamp:		time which sync_pt status transitioned from active to
- *			  singaled or error.
- */
-struct sync_pt {
-	struct sync_timeline		*parent;
-	struct list_head	child_list;
-
-	struct list_head	active_list;
-	struct list_head	signaled_list;
-
-	struct sync_fence	*fence;
-	struct list_head	pt_list;
-
-	/* protected by parent->active_list_lock */
-	int			status;
-
-	ktime_t			timestamp;
-};
-
-/**
- * struct sync_fence - sync fence
- * @file:		file representing this fence
- * @kref:		referenace count on fence.
- * @name:		name of sync_fence.  Useful for debugging
- * @pt_list_head:	list of sync_pts in ths fence.  immutable once fence
- *			  is created
- * @waiter_list_head:	list of asynchronous waiters on this fence
- * @waiter_list_lock:	lock protecting @waiter_list_head and @status
- * @status:		1: signaled, 0:active, <0: error
- *
- * @wq:			wait queue for fence signaling
- * @sync_fence_list:	membership in global fence list
- */
-struct sync_fence {
-	struct file		*file;
-	struct kref		kref;
-	char			name[32];
-
-	/* this list is immutable once the fence is created */
-	struct list_head	pt_list_head;
-
-	struct list_head	waiter_list_head;
-	spinlock_t		waiter_list_lock; /* also protects status */
-	int			status;
-
-	wait_queue_head_t	wq;
-
-	struct list_head	sync_fence_list;
-};
-
-struct sync_fence_waiter;
-typedef void (*sync_callback_t)(struct sync_fence *fence,
-				struct sync_fence_waiter *waiter);
-
-/**
- * struct sync_fence_waiter - metadata for asynchronous waiter on a fence
- * @waiter_list:	membership in sync_fence.waiter_list_head
- * @callback:		function pointer to call when fence signals
- * @callback_data:	pointer to pass to @callback
- */
-struct sync_fence_waiter {
-	struct list_head	waiter_list;
-
-	sync_callback_t		callback;
-};
-
-static inline void sync_fence_waiter_init(struct sync_fence_waiter *waiter,
-					  sync_callback_t callback)
-{
-	waiter->callback = callback;
-}
-
-/*
- * API for sync_timeline implementers
- */
-
-/**
- * sync_timeline_create() - creates a sync object
- * @ops:	specifies the implemention ops for the object
- * @size:	size to allocate for this obj
- * @name:	sync_timeline name
- *
- * Creates a new sync_timeline which will use the implemetation specified by
- * @ops.  @size bytes will be allocated allowing for implemntation specific
- * data to be kept after the generic sync_timeline stuct.
- */
-struct sync_timeline *sync_timeline_create(const struct sync_timeline_ops *ops,
-					   int size, const char *name);
-
-/**
- * sync_timeline_destory() - destorys a sync object
- * @obj:	sync_timeline to destroy
- *
- * A sync implemntation should call this when the @obj is going away
- * (i.e. module unload.)  @obj won't actually be freed until all its childern
- * sync_pts are freed.
- */
-void sync_timeline_destroy(struct sync_timeline *obj);
-
-/**
- * sync_timeline_signal() - signal a status change on a sync_timeline
- * @obj:	sync_timeline to signal
- *
- * A sync implemntation should call this any time one of it's sync_pts
- * has signaled or has an error condition.
- */
-void sync_timeline_signal(struct sync_timeline *obj);
-
-/**
- * sync_pt_create() - creates a sync pt
- * @parent:	sync_pt's parent sync_timeline
- * @size:	size to allocate for this pt
- *
- * Creates a new sync_pt as a chiled of @parent.  @size bytes will be
- * allocated allowing for implemntation specific data to be kept after
- * the generic sync_timeline struct.
- */
-struct sync_pt *sync_pt_create(struct sync_timeline *parent, int size);
-
-/**
- * sync_pt_free() - frees a sync pt
- * @pt:		sync_pt to free
- *
- * This should only be called on sync_pts which have been created but
- * not added to a fence.
- */
-void sync_pt_free(struct sync_pt *pt);
-
-/**
- * sync_fence_create() - creates a sync fence
- * @name:	name of fence to create
- * @pt:		sync_pt to add to the fence
- *
- * Creates a fence containg @pt.  Once this is called, the fence takes
- * ownership of @pt.
- */
-struct sync_fence *sync_fence_create(const char *name, struct sync_pt *pt);
-
-/*
- * API for sync_fence consumers
- */
-
-/**
- * sync_fence_merge() - merge two fences
- * @name:	name of new fence
- * @a:		fence a
- * @b:		fence b
- *
- * Creates a new fence which contains copies of all the sync_pts in both
- * @a and @b.  @a and @b remain valid, independent fences.
- */
-struct sync_fence *sync_fence_merge(const char *name,
-				    struct sync_fence *a, struct sync_fence *b);
-
-/**
- * sync_fence_fdget() - get a fence from an fd
- * @fd:		fd referencing a fence
- *
- * Ensures @fd references a valid fence, increments the refcount of the backing
- * file, and returns the fence.
- */
-struct sync_fence *sync_fence_fdget(int fd);
-
-/**
- * sync_fence_put() - puts a refernnce of a sync fence
- * @fence:	fence to put
- *
- * Puts a reference on @fence.  If this is the last reference, the fence and
- * all it's sync_pts will be freed
- */
-void sync_fence_put(struct sync_fence *fence);
-
-/**
- * sync_fence_install() - installs a fence into a file descriptor
- * @fence:	fence to instal
- * @fd:		file descriptor in which to install the fence
- *
- * Installs @fence into @fd.  @fd's should be acquired through get_unused_fd().
- */
-void sync_fence_install(struct sync_fence *fence, int fd);
-
-/**
- * sync_fence_wait_async() - registers and async wait on the fence
- * @fence:		fence to wait on
- * @waiter:		waiter callback struck
- *
- * Returns 1 if @fence has already signaled.
- *
- * Registers a callback to be called when @fence signals or has an error.
- * @waiter should be initialized with sync_fence_waiter_init().
- */
-int sync_fence_wait_async(struct sync_fence *fence,
-			  struct sync_fence_waiter *waiter);
-
-/**
- * sync_fence_cancel_async() - cancels an async wait
- * @fence:		fence to wait on
- * @waiter:		waiter callback struck
- *
- * returns 0 if waiter was removed from fence's async waiter list.
- * returns -ENOENT if waiter was not found on fence's async waiter list.
- *
- * Cancels a previously registered async wait.  Will fail gracefully if
- * @waiter was never registered or if @fence has already signaled @waiter.
- */
-int sync_fence_cancel_async(struct sync_fence *fence,
-			    struct sync_fence_waiter *waiter);
-
-/**
- * sync_fence_wait() - wait on fence
- * @fence:	fence to wait on
- * @tiemout:	timeout in ms
- *
- * Wait for @fence to be signaled or have an error.  Waits indefinitely
- * if @timeout < 0
- */
-int sync_fence_wait(struct sync_fence *fence, long timeout);
-
-#endif /* __KERNEL__ */
-
-/**
- * struct sync_merge_data - data passed to merge ioctl
- * @fd2:	file descriptor of second fence
- * @name:	name of new fence
- * @fence:	returns the fd of the new fence to userspace
- */
-struct sync_merge_data {
-	__s32	fd2; /* fd of second fence */
-	char	name[32]; /* name of new fence */
-	__s32	fence; /* fd on newly created fence */
-};
-
-/**
- * struct sync_pt_info - detailed sync_pt information
- * @len:		length of sync_pt_info including any driver_data
- * @obj_name:		name of parent sync_timeline
- * @driver_name:	name of driver implmenting the parent
- * @status:		status of the sync_pt 0:active 1:signaled <0:error
- * @timestamp_ns:	timestamp of status change in nanoseconds
- * @driver_data:	any driver dependant data
- */
-struct sync_pt_info {
-	__u32	len;
-	char	obj_name[32];
-	char	driver_name[32];
-	__s32	status;
-	__u64	timestamp_ns;
-
-	__u8	driver_data[0];
-};
-
-/**
- * struct sync_fence_info_data - data returned from fence info ioctl
- * @len:	ioctl caller writes the size of the buffer its passing in.
- *		ioctl returns length of sync_fence_data reutnred to userspace
- *		including pt_info.
- * @name:	name of fence
- * @status:	status of fence. 1: signaled 0:active <0:error
- * @pt_info:	a sync_pt_info struct for every sync_pt in the fence
- */
-struct sync_fence_info_data {
-	__u32	len;
-	char	name[32];
-	__s32	status;
-
-	__u8	pt_info[0];
-};
-
-#define SYNC_IOC_MAGIC		'>'
-
-/**
- * DOC: SYNC_IOC_WAIT - wait for a fence to signal
- *
- * pass timeout in milliseconds.  Waits indefinitely timeout < 0.
- */
-#define SYNC_IOC_WAIT		_IOW(SYNC_IOC_MAGIC, 0, __s32)
-
-/**
- * DOC: SYNC_IOC_MERGE - merge two fences
- *
- * Takes a struct sync_merge_data.  Creates a new fence containing copies of
- * the sync_pts in both the calling fd and sync_merge_data.fd2.  Returns the
- * new fence's fd in sync_merge_data.fence
- */
-#define SYNC_IOC_MERGE		_IOWR(SYNC_IOC_MAGIC, 1, struct sync_merge_data)
-
-/**
- * DOC: SYNC_IOC_FENCE_INFO - get detailed information on a fence
- *
- * Takes a struct sync_fence_info_data with extra space allocated for pt_info.
- * Caller should write the size of the buffer into len.  On return, len is
- * updated to reflect the total size of the sync_fence_info_data including
- * pt_info.
- *
- * pt_info is a buffer containing sync_pt_infos for every sync_pt in the fence.
- * To itterate over the sync_pt_infos, use the sync_pt_info.len field.
- */
-#define SYNC_IOC_FENCE_INFO	_IOWR(SYNC_IOC_MAGIC, 2,\
-	struct sync_fence_info_data)
-
-#endif /* _LINUX_SYNC_H */
diff --git a/ANDROID_3.4.5/include/linux/synclink.h b/ANDROID_3.4.5/include/linux/synclink.h
deleted file mode 100644
index 2e7d81c4..00000000
--- a/ANDROID_3.4.5/include/linux/synclink.h
+++ /dev/null
@@ -1,323 +0,0 @@
-/*
- * SyncLink Multiprotocol Serial Adapter Driver
- *
- * $Id: synclink.h,v 3.14 2006/07/17 20:15:43 paulkf Exp $
- *
- * Copyright (C) 1998-2000 by Microgate Corporation
- *
- * Redistribution of this file is permitted under
- * the terms of the GNU Public License (GPL)
- */
-
-#ifndef _SYNCLINK_H_
-#define _SYNCLINK_H_
-#define SYNCLINK_H_VERSION 3.6
-
-#include <linux/types.h>
-
-#define BIT0	0x0001
-#define BIT1	0x0002
-#define BIT2	0x0004
-#define BIT3	0x0008
-#define BIT4	0x0010
-#define BIT5	0x0020
-#define BIT6	0x0040
-#define BIT7	0x0080
-#define BIT8	0x0100
-#define BIT9	0x0200
-#define BIT10	0x0400
-#define BIT11	0x0800
-#define BIT12	0x1000
-#define BIT13	0x2000
-#define BIT14	0x4000
-#define BIT15	0x8000
-#define BIT16	0x00010000
-#define BIT17	0x00020000
-#define BIT18	0x00040000
-#define BIT19	0x00080000
-#define BIT20	0x00100000
-#define BIT21	0x00200000
-#define BIT22	0x00400000
-#define BIT23	0x00800000
-#define BIT24	0x01000000
-#define BIT25	0x02000000
-#define BIT26	0x04000000
-#define BIT27	0x08000000
-#define BIT28	0x10000000
-#define BIT29	0x20000000
-#define BIT30	0x40000000
-#define BIT31	0x80000000
-
-
-#define HDLC_MAX_FRAME_SIZE	65535
-#define MAX_ASYNC_TRANSMIT	4096
-#define MAX_ASYNC_BUFFER_SIZE	4096
-
-#define ASYNC_PARITY_NONE		0
-#define ASYNC_PARITY_EVEN		1
-#define ASYNC_PARITY_ODD		2
-#define ASYNC_PARITY_SPACE		3
-
-#define HDLC_FLAG_UNDERRUN_ABORT7	0x0000
-#define HDLC_FLAG_UNDERRUN_ABORT15	0x0001
-#define HDLC_FLAG_UNDERRUN_FLAG		0x0002
-#define HDLC_FLAG_UNDERRUN_CRC		0x0004
-#define HDLC_FLAG_SHARE_ZERO		0x0010
-#define HDLC_FLAG_AUTO_CTS		0x0020
-#define HDLC_FLAG_AUTO_DCD		0x0040
-#define HDLC_FLAG_AUTO_RTS		0x0080
-#define HDLC_FLAG_RXC_DPLL		0x0100
-#define HDLC_FLAG_RXC_BRG		0x0200
-#define HDLC_FLAG_RXC_TXCPIN		0x8000
-#define HDLC_FLAG_RXC_RXCPIN		0x0000
-#define HDLC_FLAG_TXC_DPLL		0x0400
-#define HDLC_FLAG_TXC_BRG		0x0800
-#define HDLC_FLAG_TXC_TXCPIN		0x0000
-#define HDLC_FLAG_TXC_RXCPIN		0x0008
-#define HDLC_FLAG_DPLL_DIV8		0x1000
-#define HDLC_FLAG_DPLL_DIV16		0x2000
-#define HDLC_FLAG_DPLL_DIV32		0x0000
-#define HDLC_FLAG_HDLC_LOOPMODE		0x4000
-
-#define HDLC_CRC_NONE			0
-#define HDLC_CRC_16_CCITT		1
-#define HDLC_CRC_32_CCITT		2
-#define HDLC_CRC_MASK			0x00ff
-#define HDLC_CRC_RETURN_EX		0x8000
-
-#define RX_OK				0
-#define RX_CRC_ERROR			1
-
-#define HDLC_TXIDLE_FLAGS		0
-#define HDLC_TXIDLE_ALT_ZEROS_ONES	1
-#define HDLC_TXIDLE_ZEROS		2
-#define HDLC_TXIDLE_ONES		3
-#define HDLC_TXIDLE_ALT_MARK_SPACE	4
-#define HDLC_TXIDLE_SPACE		5
-#define HDLC_TXIDLE_MARK		6
-#define HDLC_TXIDLE_CUSTOM_8            0x10000000
-#define HDLC_TXIDLE_CUSTOM_16           0x20000000
-
-#define HDLC_ENCODING_NRZ			0
-#define HDLC_ENCODING_NRZB			1
-#define HDLC_ENCODING_NRZI_MARK			2
-#define HDLC_ENCODING_NRZI_SPACE		3
-#define HDLC_ENCODING_NRZI			HDLC_ENCODING_NRZI_SPACE
-#define HDLC_ENCODING_BIPHASE_MARK		4
-#define HDLC_ENCODING_BIPHASE_SPACE		5
-#define HDLC_ENCODING_BIPHASE_LEVEL		6
-#define HDLC_ENCODING_DIFF_BIPHASE_LEVEL	7
-
-#define HDLC_PREAMBLE_LENGTH_8BITS	0
-#define HDLC_PREAMBLE_LENGTH_16BITS	1
-#define HDLC_PREAMBLE_LENGTH_32BITS	2
-#define HDLC_PREAMBLE_LENGTH_64BITS	3
-
-#define HDLC_PREAMBLE_PATTERN_NONE	0
-#define HDLC_PREAMBLE_PATTERN_ZEROS	1
-#define HDLC_PREAMBLE_PATTERN_FLAGS	2
-#define HDLC_PREAMBLE_PATTERN_10	3
-#define HDLC_PREAMBLE_PATTERN_01	4
-#define HDLC_PREAMBLE_PATTERN_ONES	5
-
-#define MGSL_MODE_ASYNC		1
-#define MGSL_MODE_HDLC		2
-#define MGSL_MODE_MONOSYNC	3
-#define MGSL_MODE_BISYNC	4
-#define MGSL_MODE_RAW		6
-#define MGSL_MODE_BASE_CLOCK    7
-#define MGSL_MODE_XSYNC         8
-
-#define MGSL_BUS_TYPE_ISA	1
-#define MGSL_BUS_TYPE_EISA	2
-#define MGSL_BUS_TYPE_PCI	5
-
-#define MGSL_INTERFACE_MASK     0xf
-#define MGSL_INTERFACE_DISABLE  0
-#define MGSL_INTERFACE_RS232    1
-#define MGSL_INTERFACE_V35      2
-#define MGSL_INTERFACE_RS422    3
-#define MGSL_INTERFACE_RTS_EN   0x10
-#define MGSL_INTERFACE_LL       0x20
-#define MGSL_INTERFACE_RL       0x40
-#define MGSL_INTERFACE_MSB_FIRST 0x80
-
-typedef struct _MGSL_PARAMS
-{
-	/* Common */
-
-	unsigned long	mode;		/* Asynchronous or HDLC */
-	unsigned char	loopback;	/* internal loopback mode */
-
-	/* HDLC Only */
-
-	unsigned short	flags;
-	unsigned char	encoding;	/* NRZ, NRZI, etc. */
-	unsigned long	clock_speed;	/* external clock speed in bits per second */
-	unsigned char	addr_filter;	/* receive HDLC address filter, 0xFF = disable */
-	unsigned short	crc_type;	/* None, CRC16-CCITT, or CRC32-CCITT */
-	unsigned char	preamble_length;
-	unsigned char	preamble;
-
-	/* Async Only */
-
-	unsigned long	data_rate;	/* bits per second */
-	unsigned char	data_bits;	/* 7 or 8 data bits */
-	unsigned char	stop_bits;	/* 1 or 2 stop bits */
-	unsigned char	parity;		/* none, even, or odd */
-
-} MGSL_PARAMS, *PMGSL_PARAMS;
-
-#define MICROGATE_VENDOR_ID 0x13c0
-#define SYNCLINK_DEVICE_ID 0x0010
-#define MGSCC_DEVICE_ID 0x0020
-#define SYNCLINK_SCA_DEVICE_ID 0x0030
-#define SYNCLINK_GT_DEVICE_ID 0x0070
-#define SYNCLINK_GT4_DEVICE_ID 0x0080
-#define SYNCLINK_AC_DEVICE_ID  0x0090
-#define SYNCLINK_GT2_DEVICE_ID 0x00A0
-#define MGSL_MAX_SERIAL_NUMBER 30
-
-/*
-** device diagnostics status
-*/
-
-#define DiagStatus_OK				0
-#define DiagStatus_AddressFailure		1
-#define DiagStatus_AddressConflict		2
-#define DiagStatus_IrqFailure			3
-#define DiagStatus_IrqConflict			4
-#define DiagStatus_DmaFailure			5
-#define DiagStatus_DmaConflict			6
-#define DiagStatus_PciAdapterNotFound		7
-#define DiagStatus_CantAssignPciResources	8
-#define DiagStatus_CantAssignPciMemAddr		9
-#define DiagStatus_CantAssignPciIoAddr		10
-#define DiagStatus_CantAssignPciIrq		11
-#define DiagStatus_MemoryError			12
-
-#define SerialSignal_DCD            0x01     /* Data Carrier Detect */
-#define SerialSignal_TXD            0x02     /* Transmit Data */
-#define SerialSignal_RI             0x04     /* Ring Indicator */
-#define SerialSignal_RXD            0x08     /* Receive Data */
-#define SerialSignal_CTS            0x10     /* Clear to Send */
-#define SerialSignal_RTS            0x20     /* Request to Send */
-#define SerialSignal_DSR            0x40     /* Data Set Ready */
-#define SerialSignal_DTR            0x80     /* Data Terminal Ready */
-
-
-/*
- * Counters of the input lines (CTS, DSR, RI, CD) interrupts
- */
-struct mgsl_icount {
-	__u32	cts, dsr, rng, dcd, tx, rx;
-	__u32	frame, parity, overrun, brk;
-	__u32	buf_overrun;
-	__u32	txok;
-	__u32	txunder;
-	__u32	txabort;
-	__u32	txtimeout;
-	__u32	rxshort;
-	__u32	rxlong;
-	__u32	rxabort;
-	__u32	rxover;
-	__u32	rxcrc;
-	__u32	rxok;
-	__u32	exithunt;
-	__u32	rxidle;
-};
-
-struct gpio_desc {
-	__u32 state;
-	__u32 smask;
-	__u32 dir;
-	__u32 dmask;
-};
-
-#define DEBUG_LEVEL_DATA	1
-#define DEBUG_LEVEL_ERROR 	2
-#define DEBUG_LEVEL_INFO  	3
-#define DEBUG_LEVEL_BH    	4
-#define DEBUG_LEVEL_ISR		5
-
-/*
-** Event bit flags for use with MgslWaitEvent
-*/
-
-#define MgslEvent_DsrActive	0x0001
-#define MgslEvent_DsrInactive	0x0002
-#define MgslEvent_Dsr		0x0003
-#define MgslEvent_CtsActive	0x0004
-#define MgslEvent_CtsInactive	0x0008
-#define MgslEvent_Cts		0x000c
-#define MgslEvent_DcdActive	0x0010
-#define MgslEvent_DcdInactive	0x0020
-#define MgslEvent_Dcd		0x0030
-#define MgslEvent_RiActive	0x0040
-#define MgslEvent_RiInactive	0x0080
-#define MgslEvent_Ri		0x00c0
-#define MgslEvent_ExitHuntMode	0x0100
-#define MgslEvent_IdleReceived	0x0200
-
-/* Private IOCTL codes:
- *
- * MGSL_IOCSPARAMS	set MGSL_PARAMS structure values
- * MGSL_IOCGPARAMS	get current MGSL_PARAMS structure values
- * MGSL_IOCSTXIDLE	set current transmit idle mode
- * MGSL_IOCGTXIDLE	get current transmit idle mode
- * MGSL_IOCTXENABLE	enable or disable transmitter
- * MGSL_IOCRXENABLE	enable or disable receiver
- * MGSL_IOCTXABORT	abort transmitting frame (HDLC)
- * MGSL_IOCGSTATS	return current statistics
- * MGSL_IOCWAITEVENT	wait for specified event to occur
- * MGSL_LOOPTXDONE	transmit in HDLC LoopMode done
- * MGSL_IOCSIF          set the serial interface type
- * MGSL_IOCGIF          get the serial interface type
- */
-#define MGSL_MAGIC_IOC	'm'
-#define MGSL_IOCSPARAMS		_IOW(MGSL_MAGIC_IOC,0,struct _MGSL_PARAMS)
-#define MGSL_IOCGPARAMS		_IOR(MGSL_MAGIC_IOC,1,struct _MGSL_PARAMS)
-#define MGSL_IOCSTXIDLE		_IO(MGSL_MAGIC_IOC,2)
-#define MGSL_IOCGTXIDLE		_IO(MGSL_MAGIC_IOC,3)
-#define MGSL_IOCTXENABLE	_IO(MGSL_MAGIC_IOC,4)
-#define MGSL_IOCRXENABLE	_IO(MGSL_MAGIC_IOC,5)
-#define MGSL_IOCTXABORT		_IO(MGSL_MAGIC_IOC,6)
-#define MGSL_IOCGSTATS		_IO(MGSL_MAGIC_IOC,7)
-#define MGSL_IOCWAITEVENT	_IOWR(MGSL_MAGIC_IOC,8,int)
-#define MGSL_IOCCLRMODCOUNT	_IO(MGSL_MAGIC_IOC,15)
-#define MGSL_IOCLOOPTXDONE	_IO(MGSL_MAGIC_IOC,9)
-#define MGSL_IOCSIF		_IO(MGSL_MAGIC_IOC,10)
-#define MGSL_IOCGIF		_IO(MGSL_MAGIC_IOC,11)
-#define MGSL_IOCSGPIO		_IOW(MGSL_MAGIC_IOC,16,struct gpio_desc)
-#define MGSL_IOCGGPIO		_IOR(MGSL_MAGIC_IOC,17,struct gpio_desc)
-#define MGSL_IOCWAITGPIO	_IOWR(MGSL_MAGIC_IOC,18,struct gpio_desc)
-#define MGSL_IOCSXSYNC		_IO(MGSL_MAGIC_IOC, 19)
-#define MGSL_IOCGXSYNC		_IO(MGSL_MAGIC_IOC, 20)
-#define MGSL_IOCSXCTRL		_IO(MGSL_MAGIC_IOC, 21)
-#define MGSL_IOCGXCTRL		_IO(MGSL_MAGIC_IOC, 22)
-
-#ifdef __KERNEL__
-/* provide 32 bit ioctl compatibility on 64 bit systems */
-#ifdef CONFIG_COMPAT
-#include <linux/compat.h>
-struct MGSL_PARAMS32 {
-	compat_ulong_t	mode;
-	unsigned char	loopback;
-	unsigned short	flags;
-	unsigned char	encoding;
-	compat_ulong_t	clock_speed;
-	unsigned char	addr_filter;
-	unsigned short	crc_type;
-	unsigned char	preamble_length;
-	unsigned char	preamble;
-	compat_ulong_t	data_rate;
-	unsigned char	data_bits;
-	unsigned char	stop_bits;
-	unsigned char	parity;
-};
-#define MGSL_IOCSPARAMS32 _IOW(MGSL_MAGIC_IOC,0,struct MGSL_PARAMS32)
-#define MGSL_IOCGPARAMS32 _IOR(MGSL_MAGIC_IOC,1,struct MGSL_PARAMS32)
-#endif
-#endif
-
-#endif /* _SYNCLINK_H_ */
diff --git a/ANDROID_3.4.5/include/linux/sys.h b/ANDROID_3.4.5/include/linux/sys.h
deleted file mode 100644
index daa6008b..00000000
--- a/ANDROID_3.4.5/include/linux/sys.h
+++ /dev/null
@@ -1,29 +0,0 @@
-#ifndef _LINUX_SYS_H
-#define _LINUX_SYS_H
-
-/*
- * This file is no longer used or needed
- */
-
-/*
- * These are system calls that will be removed at some time
- * due to newer versions existing..
- * (please be careful - ibcs2 may need some of these).
- */
-#ifdef notdef
-#define _sys_waitpid	_sys_old_syscall	/* _sys_wait4 */
-#define _sys_olduname	_sys_old_syscall	/* _sys_newuname */
-#define _sys_uname	_sys_old_syscall	/* _sys_newuname */
-#define _sys_stat	_sys_old_syscall	/* _sys_newstat */
-#define _sys_fstat	_sys_old_syscall	/* _sys_newfstat */
-#define _sys_lstat	_sys_old_syscall	/* _sys_newlstat */
-#define _sys_signal	_sys_old_syscall	/* _sys_sigaction */
-#define _sys_sgetmask	_sys_old_syscall	/* _sys_sigprocmask */
-#define _sys_ssetmask	_sys_old_syscall	/* _sys_sigprocmask */
-#endif
-
-/*
- * These are system calls that haven't been implemented yet
- * but have an entry in the table for future expansion..
- */
-#endif
diff --git a/ANDROID_3.4.5/include/linux/sys_soc.h b/ANDROID_3.4.5/include/linux/sys_soc.h
deleted file mode 100644
index 2739ccb6..00000000
--- a/ANDROID_3.4.5/include/linux/sys_soc.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2011
- * Author: Lee Jones <lee.jones@linaro.org> for ST-Ericsson.
- * License terms:  GNU General Public License (GPL), version 2
- */
-#ifndef __SOC_BUS_H
-#define __SOC_BUS_H
-
-#include <linux/device.h>
-
-struct soc_device_attribute {
-	const char *machine;
-	const char *family;
-	const char *revision;
-	const char *soc_id;
-};
-
-/**
- * soc_device_register - register SoC as a device
- * @soc_plat_dev_attr: Attributes passed from platform to be attributed to a SoC
- */
-struct soc_device *soc_device_register(
-	struct soc_device_attribute *soc_plat_dev_attr);
-
-/**
- * soc_device_unregister - unregister SoC device
- * @dev: SoC device to be unregistered
- */
-void soc_device_unregister(struct soc_device *soc_dev);
-
-/**
- * soc_device_to_device - helper function to fetch struct device
- * @soc: Previously registered SoC device container
- */
-struct device *soc_device_to_device(struct soc_device *soc);
-
-#endif /* __SOC_BUS_H */
diff --git a/ANDROID_3.4.5/include/linux/syscalls.h b/ANDROID_3.4.5/include/linux/syscalls.h
deleted file mode 100644
index 3de3acb8..00000000
--- a/ANDROID_3.4.5/include/linux/syscalls.h
+++ /dev/null
@@ -1,861 +0,0 @@
-/*
- * syscalls.h - Linux syscall interfaces (non-arch-specific)
- *
- * Copyright (c) 2004 Randy Dunlap
- * Copyright (c) 2004 Open Source Development Labs
- *
- * This file is released under the GPLv2.
- * See the file COPYING for more details.
- */
-
-#ifndef _LINUX_SYSCALLS_H
-#define _LINUX_SYSCALLS_H
-
-struct epoll_event;
-struct iattr;
-struct inode;
-struct iocb;
-struct io_event;
-struct iovec;
-struct itimerspec;
-struct itimerval;
-struct kexec_segment;
-struct linux_dirent;
-struct linux_dirent64;
-struct list_head;
-struct mmap_arg_struct;
-struct msgbuf;
-struct msghdr;
-struct mmsghdr;
-struct msqid_ds;
-struct new_utsname;
-struct nfsctl_arg;
-struct __old_kernel_stat;
-struct oldold_utsname;
-struct old_utsname;
-struct pollfd;
-struct rlimit;
-struct rlimit64;
-struct rusage;
-struct sched_param;
-struct sel_arg_struct;
-struct semaphore;
-struct sembuf;
-struct shmid_ds;
-struct sockaddr;
-struct stat;
-struct stat64;
-struct statfs;
-struct statfs64;
-struct __sysctl_args;
-struct sysinfo;
-struct timespec;
-struct timeval;
-struct timex;
-struct timezone;
-struct tms;
-struct utimbuf;
-struct mq_attr;
-struct compat_stat;
-struct compat_timeval;
-struct robust_list_head;
-struct getcpu_cache;
-struct old_linux_dirent;
-struct perf_event_attr;
-struct file_handle;
-
-#include <linux/types.h>
-#include <linux/aio_abi.h>
-#include <linux/capability.h>
-#include <linux/list.h>
-#include <linux/bug.h>
-#include <linux/sem.h>
-#include <asm/siginfo.h>
-#include <asm/signal.h>
-#include <linux/unistd.h>
-#include <linux/quota.h>
-#include <linux/key.h>
-#include <trace/syscall.h>
-
-#define __SC_DECL1(t1, a1)	t1 a1
-#define __SC_DECL2(t2, a2, ...) t2 a2, __SC_DECL1(__VA_ARGS__)
-#define __SC_DECL3(t3, a3, ...) t3 a3, __SC_DECL2(__VA_ARGS__)
-#define __SC_DECL4(t4, a4, ...) t4 a4, __SC_DECL3(__VA_ARGS__)
-#define __SC_DECL5(t5, a5, ...) t5 a5, __SC_DECL4(__VA_ARGS__)
-#define __SC_DECL6(t6, a6, ...) t6 a6, __SC_DECL5(__VA_ARGS__)
-
-#define __SC_LONG1(t1, a1) 	long a1
-#define __SC_LONG2(t2, a2, ...) long a2, __SC_LONG1(__VA_ARGS__)
-#define __SC_LONG3(t3, a3, ...) long a3, __SC_LONG2(__VA_ARGS__)
-#define __SC_LONG4(t4, a4, ...) long a4, __SC_LONG3(__VA_ARGS__)
-#define __SC_LONG5(t5, a5, ...) long a5, __SC_LONG4(__VA_ARGS__)
-#define __SC_LONG6(t6, a6, ...) long a6, __SC_LONG5(__VA_ARGS__)
-
-#define __SC_CAST1(t1, a1)	(t1) a1
-#define __SC_CAST2(t2, a2, ...) (t2) a2, __SC_CAST1(__VA_ARGS__)
-#define __SC_CAST3(t3, a3, ...) (t3) a3, __SC_CAST2(__VA_ARGS__)
-#define __SC_CAST4(t4, a4, ...) (t4) a4, __SC_CAST3(__VA_ARGS__)
-#define __SC_CAST5(t5, a5, ...) (t5) a5, __SC_CAST4(__VA_ARGS__)
-#define __SC_CAST6(t6, a6, ...) (t6) a6, __SC_CAST5(__VA_ARGS__)
-
-#define __SC_TEST(type)		BUILD_BUG_ON(sizeof(type) > sizeof(long))
-#define __SC_TEST1(t1, a1)	__SC_TEST(t1)
-#define __SC_TEST2(t2, a2, ...)	__SC_TEST(t2); __SC_TEST1(__VA_ARGS__)
-#define __SC_TEST3(t3, a3, ...)	__SC_TEST(t3); __SC_TEST2(__VA_ARGS__)
-#define __SC_TEST4(t4, a4, ...)	__SC_TEST(t4); __SC_TEST3(__VA_ARGS__)
-#define __SC_TEST5(t5, a5, ...)	__SC_TEST(t5); __SC_TEST4(__VA_ARGS__)
-#define __SC_TEST6(t6, a6, ...)	__SC_TEST(t6); __SC_TEST5(__VA_ARGS__)
-
-#ifdef CONFIG_FTRACE_SYSCALLS
-#define __SC_STR_ADECL1(t, a)		#a
-#define __SC_STR_ADECL2(t, a, ...)	#a, __SC_STR_ADECL1(__VA_ARGS__)
-#define __SC_STR_ADECL3(t, a, ...)	#a, __SC_STR_ADECL2(__VA_ARGS__)
-#define __SC_STR_ADECL4(t, a, ...)	#a, __SC_STR_ADECL3(__VA_ARGS__)
-#define __SC_STR_ADECL5(t, a, ...)	#a, __SC_STR_ADECL4(__VA_ARGS__)
-#define __SC_STR_ADECL6(t, a, ...)	#a, __SC_STR_ADECL5(__VA_ARGS__)
-
-#define __SC_STR_TDECL1(t, a)		#t
-#define __SC_STR_TDECL2(t, a, ...)	#t, __SC_STR_TDECL1(__VA_ARGS__)
-#define __SC_STR_TDECL3(t, a, ...)	#t, __SC_STR_TDECL2(__VA_ARGS__)
-#define __SC_STR_TDECL4(t, a, ...)	#t, __SC_STR_TDECL3(__VA_ARGS__)
-#define __SC_STR_TDECL5(t, a, ...)	#t, __SC_STR_TDECL4(__VA_ARGS__)
-#define __SC_STR_TDECL6(t, a, ...)	#t, __SC_STR_TDECL5(__VA_ARGS__)
-
-extern struct ftrace_event_class event_class_syscall_enter;
-extern struct ftrace_event_class event_class_syscall_exit;
-extern struct trace_event_functions enter_syscall_print_funcs;
-extern struct trace_event_functions exit_syscall_print_funcs;
-
-#define SYSCALL_TRACE_ENTER_EVENT(sname)				\
-	static struct syscall_metadata __syscall_meta_##sname;		\
-	static struct ftrace_event_call __used				\
-	  event_enter_##sname = {					\
-		.name                   = "sys_enter"#sname,		\
-		.class			= &event_class_syscall_enter,	\
-		.event.funcs            = &enter_syscall_print_funcs,	\
-		.data			= (void *)&__syscall_meta_##sname,\
-		.flags			= TRACE_EVENT_FL_CAP_ANY,	\
-	};								\
-	static struct ftrace_event_call __used				\
-	  __attribute__((section("_ftrace_events")))			\
-	 *__event_enter_##sname = &event_enter_##sname;
-
-#define SYSCALL_TRACE_EXIT_EVENT(sname)					\
-	static struct syscall_metadata __syscall_meta_##sname;		\
-	static struct ftrace_event_call __used				\
-	  event_exit_##sname = {					\
-		.name                   = "sys_exit"#sname,		\
-		.class			= &event_class_syscall_exit,	\
-		.event.funcs		= &exit_syscall_print_funcs,	\
-		.data			= (void *)&__syscall_meta_##sname,\
-		.flags			= TRACE_EVENT_FL_CAP_ANY,	\
-	};								\
-	static struct ftrace_event_call __used				\
-	  __attribute__((section("_ftrace_events")))			\
-	*__event_exit_##sname = &event_exit_##sname;
-
-#define SYSCALL_METADATA(sname, nb)				\
-	SYSCALL_TRACE_ENTER_EVENT(sname);			\
-	SYSCALL_TRACE_EXIT_EVENT(sname);			\
-	static struct syscall_metadata __used			\
-	  __syscall_meta_##sname = {				\
-		.name 		= "sys"#sname,			\
-		.syscall_nr	= -1,	/* Filled in at boot */	\
-		.nb_args 	= nb,				\
-		.types		= types_##sname,		\
-		.args		= args_##sname,			\
-		.enter_event	= &event_enter_##sname,		\
-		.exit_event	= &event_exit_##sname,		\
-		.enter_fields	= LIST_HEAD_INIT(__syscall_meta_##sname.enter_fields), \
-	};							\
-	static struct syscall_metadata __used			\
-	  __attribute__((section("__syscalls_metadata")))	\
-	 *__p_syscall_meta_##sname = &__syscall_meta_##sname;
-
-#define SYSCALL_DEFINE0(sname)					\
-	SYSCALL_TRACE_ENTER_EVENT(_##sname);			\
-	SYSCALL_TRACE_EXIT_EVENT(_##sname);			\
-	static struct syscall_metadata __used			\
-	  __syscall_meta__##sname = {				\
-		.name 		= "sys_"#sname,			\
-		.syscall_nr	= -1,	/* Filled in at boot */	\
-		.nb_args 	= 0,				\
-		.enter_event	= &event_enter__##sname,	\
-		.exit_event	= &event_exit__##sname,		\
-		.enter_fields	= LIST_HEAD_INIT(__syscall_meta__##sname.enter_fields), \
-	};							\
-	static struct syscall_metadata __used			\
-	  __attribute__((section("__syscalls_metadata")))	\
-	 *__p_syscall_meta_##sname = &__syscall_meta__##sname;	\
-	asmlinkage long sys_##sname(void)
-#else
-#define SYSCALL_DEFINE0(name)	   asmlinkage long sys_##name(void)
-#endif
-
-#define SYSCALL_DEFINE1(name, ...) SYSCALL_DEFINEx(1, _##name, __VA_ARGS__)
-#define SYSCALL_DEFINE2(name, ...) SYSCALL_DEFINEx(2, _##name, __VA_ARGS__)
-#define SYSCALL_DEFINE3(name, ...) SYSCALL_DEFINEx(3, _##name, __VA_ARGS__)
-#define SYSCALL_DEFINE4(name, ...) SYSCALL_DEFINEx(4, _##name, __VA_ARGS__)
-#define SYSCALL_DEFINE5(name, ...) SYSCALL_DEFINEx(5, _##name, __VA_ARGS__)
-#define SYSCALL_DEFINE6(name, ...) SYSCALL_DEFINEx(6, _##name, __VA_ARGS__)
-
-#ifdef CONFIG_PPC64
-#define SYSCALL_ALIAS(alias, name)					\
-	asm ("\t.globl " #alias "\n\t.set " #alias ", " #name "\n"	\
-	     "\t.globl ." #alias "\n\t.set ." #alias ", ." #name)
-#else
-#if defined(CONFIG_ALPHA) || defined(CONFIG_MIPS)
-#define SYSCALL_ALIAS(alias, name)					\
-	asm ( #alias " = " #name "\n\t.globl " #alias)
-#else
-#define SYSCALL_ALIAS(alias, name)					\
-	asm ("\t.globl " #alias "\n\t.set " #alias ", " #name)
-#endif
-#endif
-
-#ifdef CONFIG_FTRACE_SYSCALLS
-#define SYSCALL_DEFINEx(x, sname, ...)				\
-	static const char *types_##sname[] = {			\
-		__SC_STR_TDECL##x(__VA_ARGS__)			\
-	};							\
-	static const char *args_##sname[] = {			\
-		__SC_STR_ADECL##x(__VA_ARGS__)			\
-	};							\
-	SYSCALL_METADATA(sname, x);				\
-	__SYSCALL_DEFINEx(x, sname, __VA_ARGS__)
-#else
-#define SYSCALL_DEFINEx(x, sname, ...)				\
-	__SYSCALL_DEFINEx(x, sname, __VA_ARGS__)
-#endif
-
-#ifdef CONFIG_HAVE_SYSCALL_WRAPPERS
-
-#define SYSCALL_DEFINE(name) static inline long SYSC_##name
-
-#define __SYSCALL_DEFINEx(x, name, ...)					\
-	asmlinkage long sys##name(__SC_DECL##x(__VA_ARGS__));		\
-	static inline long SYSC##name(__SC_DECL##x(__VA_ARGS__));	\
-	asmlinkage long SyS##name(__SC_LONG##x(__VA_ARGS__))		\
-	{								\
-		__SC_TEST##x(__VA_ARGS__);				\
-		return (long) SYSC##name(__SC_CAST##x(__VA_ARGS__));	\
-	}								\
-	SYSCALL_ALIAS(sys##name, SyS##name);				\
-	static inline long SYSC##name(__SC_DECL##x(__VA_ARGS__))
-
-#else /* CONFIG_HAVE_SYSCALL_WRAPPERS */
-
-#define SYSCALL_DEFINE(name) asmlinkage long sys_##name
-#define __SYSCALL_DEFINEx(x, name, ...)					\
-	asmlinkage long sys##name(__SC_DECL##x(__VA_ARGS__))
-
-#endif /* CONFIG_HAVE_SYSCALL_WRAPPERS */
-
-asmlinkage long sys_time(time_t __user *tloc);
-asmlinkage long sys_stime(time_t __user *tptr);
-asmlinkage long sys_gettimeofday(struct timeval __user *tv,
-				struct timezone __user *tz);
-asmlinkage long sys_settimeofday(struct timeval __user *tv,
-				struct timezone __user *tz);
-asmlinkage long sys_adjtimex(struct timex __user *txc_p);
-
-asmlinkage long sys_times(struct tms __user *tbuf);
-
-asmlinkage long sys_gettid(void);
-asmlinkage long sys_nanosleep(struct timespec __user *rqtp, struct timespec __user *rmtp);
-asmlinkage long sys_alarm(unsigned int seconds);
-asmlinkage long sys_getpid(void);
-asmlinkage long sys_getppid(void);
-asmlinkage long sys_getuid(void);
-asmlinkage long sys_geteuid(void);
-asmlinkage long sys_getgid(void);
-asmlinkage long sys_getegid(void);
-asmlinkage long sys_getresuid(uid_t __user *ruid, uid_t __user *euid, uid_t __user *suid);
-asmlinkage long sys_getresgid(gid_t __user *rgid, gid_t __user *egid, gid_t __user *sgid);
-asmlinkage long sys_getpgid(pid_t pid);
-asmlinkage long sys_getpgrp(void);
-asmlinkage long sys_getsid(pid_t pid);
-asmlinkage long sys_getgroups(int gidsetsize, gid_t __user *grouplist);
-
-asmlinkage long sys_setregid(gid_t rgid, gid_t egid);
-asmlinkage long sys_setgid(gid_t gid);
-asmlinkage long sys_setreuid(uid_t ruid, uid_t euid);
-asmlinkage long sys_setuid(uid_t uid);
-asmlinkage long sys_setresuid(uid_t ruid, uid_t euid, uid_t suid);
-asmlinkage long sys_setresgid(gid_t rgid, gid_t egid, gid_t sgid);
-asmlinkage long sys_setfsuid(uid_t uid);
-asmlinkage long sys_setfsgid(gid_t gid);
-asmlinkage long sys_setpgid(pid_t pid, pid_t pgid);
-asmlinkage long sys_setsid(void);
-asmlinkage long sys_setgroups(int gidsetsize, gid_t __user *grouplist);
-
-asmlinkage long sys_acct(const char __user *name);
-asmlinkage long sys_capget(cap_user_header_t header,
-				cap_user_data_t dataptr);
-asmlinkage long sys_capset(cap_user_header_t header,
-				const cap_user_data_t data);
-asmlinkage long sys_personality(unsigned int personality);
-
-asmlinkage long sys_sigpending(old_sigset_t __user *set);
-asmlinkage long sys_sigprocmask(int how, old_sigset_t __user *set,
-				old_sigset_t __user *oset);
-asmlinkage long sys_getitimer(int which, struct itimerval __user *value);
-asmlinkage long sys_setitimer(int which,
-				struct itimerval __user *value,
-				struct itimerval __user *ovalue);
-asmlinkage long sys_timer_create(clockid_t which_clock,
-				 struct sigevent __user *timer_event_spec,
-				 timer_t __user * created_timer_id);
-asmlinkage long sys_timer_gettime(timer_t timer_id,
-				struct itimerspec __user *setting);
-asmlinkage long sys_timer_getoverrun(timer_t timer_id);
-asmlinkage long sys_timer_settime(timer_t timer_id, int flags,
-				const struct itimerspec __user *new_setting,
-				struct itimerspec __user *old_setting);
-asmlinkage long sys_timer_delete(timer_t timer_id);
-asmlinkage long sys_clock_settime(clockid_t which_clock,
-				const struct timespec __user *tp);
-asmlinkage long sys_clock_gettime(clockid_t which_clock,
-				struct timespec __user *tp);
-asmlinkage long sys_clock_adjtime(clockid_t which_clock,
-				struct timex __user *tx);
-asmlinkage long sys_clock_getres(clockid_t which_clock,
-				struct timespec __user *tp);
-asmlinkage long sys_clock_nanosleep(clockid_t which_clock, int flags,
-				const struct timespec __user *rqtp,
-				struct timespec __user *rmtp);
-
-asmlinkage long sys_nice(int increment);
-asmlinkage long sys_sched_setscheduler(pid_t pid, int policy,
-					struct sched_param __user *param);
-asmlinkage long sys_sched_setparam(pid_t pid,
-					struct sched_param __user *param);
-asmlinkage long sys_sched_getscheduler(pid_t pid);
-asmlinkage long sys_sched_getparam(pid_t pid,
-					struct sched_param __user *param);
-asmlinkage long sys_sched_setaffinity(pid_t pid, unsigned int len,
-					unsigned long __user *user_mask_ptr);
-asmlinkage long sys_sched_getaffinity(pid_t pid, unsigned int len,
-					unsigned long __user *user_mask_ptr);
-asmlinkage long sys_sched_yield(void);
-asmlinkage long sys_sched_get_priority_max(int policy);
-asmlinkage long sys_sched_get_priority_min(int policy);
-asmlinkage long sys_sched_rr_get_interval(pid_t pid,
-					struct timespec __user *interval);
-asmlinkage long sys_setpriority(int which, int who, int niceval);
-asmlinkage long sys_getpriority(int which, int who);
-
-asmlinkage long sys_shutdown(int, int);
-asmlinkage long sys_reboot(int magic1, int magic2, unsigned int cmd,
-				void __user *arg);
-asmlinkage long sys_restart_syscall(void);
-asmlinkage long sys_kexec_load(unsigned long entry, unsigned long nr_segments,
-				struct kexec_segment __user *segments,
-				unsigned long flags);
-
-asmlinkage long sys_exit(int error_code);
-asmlinkage long sys_exit_group(int error_code);
-asmlinkage long sys_wait4(pid_t pid, int __user *stat_addr,
-				int options, struct rusage __user *ru);
-asmlinkage long sys_waitid(int which, pid_t pid,
-			   struct siginfo __user *infop,
-			   int options, struct rusage __user *ru);
-asmlinkage long sys_waitpid(pid_t pid, int __user *stat_addr, int options);
-asmlinkage long sys_set_tid_address(int __user *tidptr);
-asmlinkage long sys_futex(u32 __user *uaddr, int op, u32 val,
-			struct timespec __user *utime, u32 __user *uaddr2,
-			u32 val3);
-
-asmlinkage long sys_init_module(void __user *umod, unsigned long len,
-				const char __user *uargs);
-asmlinkage long sys_delete_module(const char __user *name_user,
-				unsigned int flags);
-
-asmlinkage long sys_rt_sigprocmask(int how, sigset_t __user *set,
-				sigset_t __user *oset, size_t sigsetsize);
-asmlinkage long sys_rt_sigpending(sigset_t __user *set, size_t sigsetsize);
-asmlinkage long sys_rt_sigtimedwait(const sigset_t __user *uthese,
-				siginfo_t __user *uinfo,
-				const struct timespec __user *uts,
-				size_t sigsetsize);
-asmlinkage long sys_rt_tgsigqueueinfo(pid_t tgid, pid_t  pid, int sig,
-		siginfo_t __user *uinfo);
-asmlinkage long sys_kill(int pid, int sig);
-asmlinkage long sys_tgkill(int tgid, int pid, int sig);
-asmlinkage long sys_tkill(int pid, int sig);
-asmlinkage long sys_rt_sigqueueinfo(int pid, int sig, siginfo_t __user *uinfo);
-asmlinkage long sys_sgetmask(void);
-asmlinkage long sys_ssetmask(int newmask);
-asmlinkage long sys_signal(int sig, __sighandler_t handler);
-asmlinkage long sys_pause(void);
-
-asmlinkage long sys_sync(void);
-asmlinkage long sys_fsync(unsigned int fd);
-asmlinkage long sys_fdatasync(unsigned int fd);
-asmlinkage long sys_bdflush(int func, long data);
-asmlinkage long sys_mount(char __user *dev_name, char __user *dir_name,
-				char __user *type, unsigned long flags,
-				void __user *data);
-asmlinkage long sys_umount(char __user *name, int flags);
-asmlinkage long sys_oldumount(char __user *name);
-asmlinkage long sys_truncate(const char __user *path, long length);
-asmlinkage long sys_ftruncate(unsigned int fd, unsigned long length);
-asmlinkage long sys_stat(const char __user *filename,
-			struct __old_kernel_stat __user *statbuf);
-asmlinkage long sys_statfs(const char __user * path,
-				struct statfs __user *buf);
-asmlinkage long sys_statfs64(const char __user *path, size_t sz,
-				struct statfs64 __user *buf);
-asmlinkage long sys_fstatfs(unsigned int fd, struct statfs __user *buf);
-asmlinkage long sys_fstatfs64(unsigned int fd, size_t sz,
-				struct statfs64 __user *buf);
-asmlinkage long sys_lstat(const char __user *filename,
-			struct __old_kernel_stat __user *statbuf);
-asmlinkage long sys_fstat(unsigned int fd,
-			struct __old_kernel_stat __user *statbuf);
-asmlinkage long sys_newstat(const char __user *filename,
-				struct stat __user *statbuf);
-asmlinkage long sys_newlstat(const char __user *filename,
-				struct stat __user *statbuf);
-asmlinkage long sys_newfstat(unsigned int fd, struct stat __user *statbuf);
-asmlinkage long sys_ustat(unsigned dev, struct ustat __user *ubuf);
-#if BITS_PER_LONG == 32
-asmlinkage long sys_stat64(const char __user *filename,
-				struct stat64 __user *statbuf);
-asmlinkage long sys_fstat64(unsigned long fd, struct stat64 __user *statbuf);
-asmlinkage long sys_lstat64(const char __user *filename,
-				struct stat64 __user *statbuf);
-asmlinkage long sys_truncate64(const char __user *path, loff_t length);
-asmlinkage long sys_ftruncate64(unsigned int fd, loff_t length);
-#endif
-
-asmlinkage long sys_setxattr(const char __user *path, const char __user *name,
-			     const void __user *value, size_t size, int flags);
-asmlinkage long sys_lsetxattr(const char __user *path, const char __user *name,
-			      const void __user *value, size_t size, int flags);
-asmlinkage long sys_fsetxattr(int fd, const char __user *name,
-			      const void __user *value, size_t size, int flags);
-asmlinkage long sys_getxattr(const char __user *path, const char __user *name,
-			     void __user *value, size_t size);
-asmlinkage long sys_lgetxattr(const char __user *path, const char __user *name,
-			      void __user *value, size_t size);
-asmlinkage long sys_fgetxattr(int fd, const char __user *name,
-			      void __user *value, size_t size);
-asmlinkage long sys_listxattr(const char __user *path, char __user *list,
-			      size_t size);
-asmlinkage long sys_llistxattr(const char __user *path, char __user *list,
-			       size_t size);
-asmlinkage long sys_flistxattr(int fd, char __user *list, size_t size);
-asmlinkage long sys_removexattr(const char __user *path,
-				const char __user *name);
-asmlinkage long sys_lremovexattr(const char __user *path,
-				 const char __user *name);
-asmlinkage long sys_fremovexattr(int fd, const char __user *name);
-
-asmlinkage long sys_brk(unsigned long brk);
-asmlinkage long sys_mprotect(unsigned long start, size_t len,
-				unsigned long prot);
-asmlinkage long sys_mremap(unsigned long addr,
-			   unsigned long old_len, unsigned long new_len,
-			   unsigned long flags, unsigned long new_addr);
-asmlinkage long sys_remap_file_pages(unsigned long start, unsigned long size,
-			unsigned long prot, unsigned long pgoff,
-			unsigned long flags);
-asmlinkage long sys_msync(unsigned long start, size_t len, int flags);
-asmlinkage long sys_fadvise64(int fd, loff_t offset, size_t len, int advice);
-asmlinkage long sys_fadvise64_64(int fd, loff_t offset, loff_t len, int advice);
-asmlinkage long sys_munmap(unsigned long addr, size_t len);
-asmlinkage long sys_mlock(unsigned long start, size_t len);
-asmlinkage long sys_munlock(unsigned long start, size_t len);
-asmlinkage long sys_mlockall(int flags);
-asmlinkage long sys_munlockall(void);
-asmlinkage long sys_madvise(unsigned long start, size_t len, int behavior);
-asmlinkage long sys_mincore(unsigned long start, size_t len,
-				unsigned char __user * vec);
-
-asmlinkage long sys_pivot_root(const char __user *new_root,
-				const char __user *put_old);
-asmlinkage long sys_chroot(const char __user *filename);
-asmlinkage long sys_mknod(const char __user *filename, umode_t mode,
-				unsigned dev);
-asmlinkage long sys_link(const char __user *oldname,
-				const char __user *newname);
-asmlinkage long sys_symlink(const char __user *old, const char __user *new);
-asmlinkage long sys_unlink(const char __user *pathname);
-asmlinkage long sys_rename(const char __user *oldname,
-				const char __user *newname);
-asmlinkage long sys_chmod(const char __user *filename, umode_t mode);
-asmlinkage long sys_fchmod(unsigned int fd, umode_t mode);
-
-asmlinkage long sys_fcntl(unsigned int fd, unsigned int cmd, unsigned long arg);
-#if BITS_PER_LONG == 32
-asmlinkage long sys_fcntl64(unsigned int fd,
-				unsigned int cmd, unsigned long arg);
-#endif
-asmlinkage long sys_pipe(int __user *fildes);
-asmlinkage long sys_pipe2(int __user *fildes, int flags);
-asmlinkage long sys_dup(unsigned int fildes);
-asmlinkage long sys_dup2(unsigned int oldfd, unsigned int newfd);
-asmlinkage long sys_dup3(unsigned int oldfd, unsigned int newfd, int flags);
-asmlinkage long sys_ioperm(unsigned long from, unsigned long num, int on);
-asmlinkage long sys_ioctl(unsigned int fd, unsigned int cmd,
-				unsigned long arg);
-asmlinkage long sys_flock(unsigned int fd, unsigned int cmd);
-asmlinkage long sys_io_setup(unsigned nr_reqs, aio_context_t __user *ctx);
-asmlinkage long sys_io_destroy(aio_context_t ctx);
-asmlinkage long sys_io_getevents(aio_context_t ctx_id,
-				long min_nr,
-				long nr,
-				struct io_event __user *events,
-				struct timespec __user *timeout);
-asmlinkage long sys_io_submit(aio_context_t, long,
-				struct iocb __user * __user *);
-asmlinkage long sys_io_cancel(aio_context_t ctx_id, struct iocb __user *iocb,
-			      struct io_event __user *result);
-asmlinkage long sys_sendfile(int out_fd, int in_fd,
-			     off_t __user *offset, size_t count);
-asmlinkage long sys_sendfile64(int out_fd, int in_fd,
-			       loff_t __user *offset, size_t count);
-asmlinkage long sys_readlink(const char __user *path,
-				char __user *buf, int bufsiz);
-asmlinkage long sys_creat(const char __user *pathname, umode_t mode);
-asmlinkage long sys_open(const char __user *filename,
-				int flags, umode_t mode);
-asmlinkage long sys_close(unsigned int fd);
-asmlinkage long sys_access(const char __user *filename, int mode);
-asmlinkage long sys_vhangup(void);
-asmlinkage long sys_chown(const char __user *filename,
-				uid_t user, gid_t group);
-asmlinkage long sys_lchown(const char __user *filename,
-				uid_t user, gid_t group);
-asmlinkage long sys_fchown(unsigned int fd, uid_t user, gid_t group);
-#ifdef CONFIG_UID16
-asmlinkage long sys_chown16(const char __user *filename,
-				old_uid_t user, old_gid_t group);
-asmlinkage long sys_lchown16(const char __user *filename,
-				old_uid_t user, old_gid_t group);
-asmlinkage long sys_fchown16(unsigned int fd, old_uid_t user, old_gid_t group);
-asmlinkage long sys_setregid16(old_gid_t rgid, old_gid_t egid);
-asmlinkage long sys_setgid16(old_gid_t gid);
-asmlinkage long sys_setreuid16(old_uid_t ruid, old_uid_t euid);
-asmlinkage long sys_setuid16(old_uid_t uid);
-asmlinkage long sys_setresuid16(old_uid_t ruid, old_uid_t euid, old_uid_t suid);
-asmlinkage long sys_getresuid16(old_uid_t __user *ruid,
-				old_uid_t __user *euid, old_uid_t __user *suid);
-asmlinkage long sys_setresgid16(old_gid_t rgid, old_gid_t egid, old_gid_t sgid);
-asmlinkage long sys_getresgid16(old_gid_t __user *rgid,
-				old_gid_t __user *egid, old_gid_t __user *sgid);
-asmlinkage long sys_setfsuid16(old_uid_t uid);
-asmlinkage long sys_setfsgid16(old_gid_t gid);
-asmlinkage long sys_getgroups16(int gidsetsize, old_gid_t __user *grouplist);
-asmlinkage long sys_setgroups16(int gidsetsize, old_gid_t __user *grouplist);
-asmlinkage long sys_getuid16(void);
-asmlinkage long sys_geteuid16(void);
-asmlinkage long sys_getgid16(void);
-asmlinkage long sys_getegid16(void);
-#endif
-
-asmlinkage long sys_utime(char __user *filename,
-				struct utimbuf __user *times);
-asmlinkage long sys_utimes(char __user *filename,
-				struct timeval __user *utimes);
-asmlinkage long sys_lseek(unsigned int fd, off_t offset,
-			  unsigned int origin);
-asmlinkage long sys_llseek(unsigned int fd, unsigned long offset_high,
-			unsigned long offset_low, loff_t __user *result,
-			unsigned int origin);
-asmlinkage long sys_read(unsigned int fd, char __user *buf, size_t count);
-asmlinkage long sys_readahead(int fd, loff_t offset, size_t count);
-asmlinkage long sys_readv(unsigned long fd,
-			  const struct iovec __user *vec,
-			  unsigned long vlen);
-asmlinkage long sys_write(unsigned int fd, const char __user *buf,
-			  size_t count);
-asmlinkage long sys_writev(unsigned long fd,
-			   const struct iovec __user *vec,
-			   unsigned long vlen);
-asmlinkage long sys_pread64(unsigned int fd, char __user *buf,
-			    size_t count, loff_t pos);
-asmlinkage long sys_pwrite64(unsigned int fd, const char __user *buf,
-			     size_t count, loff_t pos);
-asmlinkage long sys_preadv(unsigned long fd, const struct iovec __user *vec,
-			   unsigned long vlen, unsigned long pos_l, unsigned long pos_h);
-asmlinkage long sys_pwritev(unsigned long fd, const struct iovec __user *vec,
-			    unsigned long vlen, unsigned long pos_l, unsigned long pos_h);
-asmlinkage long sys_getcwd(char __user *buf, unsigned long size);
-asmlinkage long sys_mkdir(const char __user *pathname, umode_t mode);
-asmlinkage long sys_chdir(const char __user *filename);
-asmlinkage long sys_fchdir(unsigned int fd);
-asmlinkage long sys_rmdir(const char __user *pathname);
-asmlinkage long sys_lookup_dcookie(u64 cookie64, char __user *buf, size_t len);
-asmlinkage long sys_quotactl(unsigned int cmd, const char __user *special,
-				qid_t id, void __user *addr);
-asmlinkage long sys_getdents(unsigned int fd,
-				struct linux_dirent __user *dirent,
-				unsigned int count);
-asmlinkage long sys_getdents64(unsigned int fd,
-				struct linux_dirent64 __user *dirent,
-				unsigned int count);
-
-asmlinkage long sys_setsockopt(int fd, int level, int optname,
-				char __user *optval, int optlen);
-asmlinkage long sys_getsockopt(int fd, int level, int optname,
-				char __user *optval, int __user *optlen);
-asmlinkage long sys_bind(int, struct sockaddr __user *, int);
-asmlinkage long sys_connect(int, struct sockaddr __user *, int);
-asmlinkage long sys_accept(int, struct sockaddr __user *, int __user *);
-asmlinkage long sys_accept4(int, struct sockaddr __user *, int __user *, int);
-asmlinkage long sys_getsockname(int, struct sockaddr __user *, int __user *);
-asmlinkage long sys_getpeername(int, struct sockaddr __user *, int __user *);
-asmlinkage long sys_send(int, void __user *, size_t, unsigned);
-asmlinkage long sys_sendto(int, void __user *, size_t, unsigned,
-				struct sockaddr __user *, int);
-asmlinkage long sys_sendmsg(int fd, struct msghdr __user *msg, unsigned flags);
-asmlinkage long sys_sendmmsg(int fd, struct mmsghdr __user *msg,
-			     unsigned int vlen, unsigned flags);
-asmlinkage long sys_recv(int, void __user *, size_t, unsigned);
-asmlinkage long sys_recvfrom(int, void __user *, size_t, unsigned,
-				struct sockaddr __user *, int __user *);
-asmlinkage long sys_recvmsg(int fd, struct msghdr __user *msg, unsigned flags);
-asmlinkage long sys_recvmmsg(int fd, struct mmsghdr __user *msg,
-			     unsigned int vlen, unsigned flags,
-			     struct timespec __user *timeout);
-asmlinkage long sys_socket(int, int, int);
-asmlinkage long sys_socketpair(int, int, int, int __user *);
-asmlinkage long sys_socketcall(int call, unsigned long __user *args);
-asmlinkage long sys_listen(int, int);
-asmlinkage long sys_poll(struct pollfd __user *ufds, unsigned int nfds,
-				int timeout);
-asmlinkage long sys_select(int n, fd_set __user *inp, fd_set __user *outp,
-			fd_set __user *exp, struct timeval __user *tvp);
-asmlinkage long sys_old_select(struct sel_arg_struct __user *arg);
-asmlinkage long sys_epoll_create(int size);
-asmlinkage long sys_epoll_create1(int flags);
-asmlinkage long sys_epoll_ctl(int epfd, int op, int fd,
-				struct epoll_event __user *event);
-asmlinkage long sys_epoll_wait(int epfd, struct epoll_event __user *events,
-				int maxevents, int timeout);
-asmlinkage long sys_epoll_pwait(int epfd, struct epoll_event __user *events,
-				int maxevents, int timeout,
-				const sigset_t __user *sigmask,
-				size_t sigsetsize);
-asmlinkage long sys_gethostname(char __user *name, int len);
-asmlinkage long sys_sethostname(char __user *name, int len);
-asmlinkage long sys_setdomainname(char __user *name, int len);
-asmlinkage long sys_newuname(struct new_utsname __user *name);
-asmlinkage long sys_uname(struct old_utsname __user *);
-asmlinkage long sys_olduname(struct oldold_utsname __user *);
-
-asmlinkage long sys_getrlimit(unsigned int resource,
-				struct rlimit __user *rlim);
-#if defined(COMPAT_RLIM_OLD_INFINITY) || !(defined(CONFIG_IA64))
-asmlinkage long sys_old_getrlimit(unsigned int resource, struct rlimit __user *rlim);
-#endif
-asmlinkage long sys_setrlimit(unsigned int resource,
-				struct rlimit __user *rlim);
-asmlinkage long sys_prlimit64(pid_t pid, unsigned int resource,
-				const struct rlimit64 __user *new_rlim,
-				struct rlimit64 __user *old_rlim);
-asmlinkage long sys_getrusage(int who, struct rusage __user *ru);
-asmlinkage long sys_umask(int mask);
-
-asmlinkage long sys_msgget(key_t key, int msgflg);
-asmlinkage long sys_msgsnd(int msqid, struct msgbuf __user *msgp,
-				size_t msgsz, int msgflg);
-asmlinkage long sys_msgrcv(int msqid, struct msgbuf __user *msgp,
-				size_t msgsz, long msgtyp, int msgflg);
-asmlinkage long sys_msgctl(int msqid, int cmd, struct msqid_ds __user *buf);
-
-asmlinkage long sys_semget(key_t key, int nsems, int semflg);
-asmlinkage long sys_semop(int semid, struct sembuf __user *sops,
-				unsigned nsops);
-asmlinkage long sys_semctl(int semid, int semnum, int cmd, union semun arg);
-asmlinkage long sys_semtimedop(int semid, struct sembuf __user *sops,
-				unsigned nsops,
-				const struct timespec __user *timeout);
-asmlinkage long sys_shmat(int shmid, char __user *shmaddr, int shmflg);
-asmlinkage long sys_shmget(key_t key, size_t size, int flag);
-asmlinkage long sys_shmdt(char __user *shmaddr);
-asmlinkage long sys_shmctl(int shmid, int cmd, struct shmid_ds __user *buf);
-asmlinkage long sys_ipc(unsigned int call, int first, unsigned long second,
-		unsigned long third, void __user *ptr, long fifth);
-
-asmlinkage long sys_mq_open(const char __user *name, int oflag, umode_t mode, struct mq_attr __user *attr);
-asmlinkage long sys_mq_unlink(const char __user *name);
-asmlinkage long sys_mq_timedsend(mqd_t mqdes, const char __user *msg_ptr, size_t msg_len, unsigned int msg_prio, const struct timespec __user *abs_timeout);
-asmlinkage long sys_mq_timedreceive(mqd_t mqdes, char __user *msg_ptr, size_t msg_len, unsigned int __user *msg_prio, const struct timespec __user *abs_timeout);
-asmlinkage long sys_mq_notify(mqd_t mqdes, const struct sigevent __user *notification);
-asmlinkage long sys_mq_getsetattr(mqd_t mqdes, const struct mq_attr __user *mqstat, struct mq_attr __user *omqstat);
-
-asmlinkage long sys_pciconfig_iobase(long which, unsigned long bus, unsigned long devfn);
-asmlinkage long sys_pciconfig_read(unsigned long bus, unsigned long dfn,
-				unsigned long off, unsigned long len,
-				void __user *buf);
-asmlinkage long sys_pciconfig_write(unsigned long bus, unsigned long dfn,
-				unsigned long off, unsigned long len,
-				void __user *buf);
-
-asmlinkage long sys_prctl(int option, unsigned long arg2, unsigned long arg3,
-			unsigned long arg4, unsigned long arg5);
-asmlinkage long sys_swapon(const char __user *specialfile, int swap_flags);
-asmlinkage long sys_swapoff(const char __user *specialfile);
-asmlinkage long sys_sysctl(struct __sysctl_args __user *args);
-asmlinkage long sys_sysinfo(struct sysinfo __user *info);
-asmlinkage long sys_sysfs(int option,
-				unsigned long arg1, unsigned long arg2);
-asmlinkage long sys_syslog(int type, char __user *buf, int len);
-asmlinkage long sys_uselib(const char __user *library);
-asmlinkage long sys_ni_syscall(void);
-asmlinkage long sys_ptrace(long request, long pid, unsigned long addr,
-			   unsigned long data);
-
-asmlinkage long sys_add_key(const char __user *_type,
-			    const char __user *_description,
-			    const void __user *_payload,
-			    size_t plen,
-			    key_serial_t destringid);
-
-asmlinkage long sys_request_key(const char __user *_type,
-				const char __user *_description,
-				const char __user *_callout_info,
-				key_serial_t destringid);
-
-asmlinkage long sys_keyctl(int cmd, unsigned long arg2, unsigned long arg3,
-			   unsigned long arg4, unsigned long arg5);
-
-asmlinkage long sys_ioprio_set(int which, int who, int ioprio);
-asmlinkage long sys_ioprio_get(int which, int who);
-asmlinkage long sys_set_mempolicy(int mode, unsigned long __user *nmask,
-				unsigned long maxnode);
-asmlinkage long sys_migrate_pages(pid_t pid, unsigned long maxnode,
-				const unsigned long __user *from,
-				const unsigned long __user *to);
-asmlinkage long sys_move_pages(pid_t pid, unsigned long nr_pages,
-				const void __user * __user *pages,
-				const int __user *nodes,
-				int __user *status,
-				int flags);
-asmlinkage long sys_mbind(unsigned long start, unsigned long len,
-				unsigned long mode,
-				unsigned long __user *nmask,
-				unsigned long maxnode,
-				unsigned flags);
-asmlinkage long sys_get_mempolicy(int __user *policy,
-				unsigned long __user *nmask,
-				unsigned long maxnode,
-				unsigned long addr, unsigned long flags);
-
-asmlinkage long sys_inotify_init(void);
-asmlinkage long sys_inotify_init1(int flags);
-asmlinkage long sys_inotify_add_watch(int fd, const char __user *path,
-					u32 mask);
-asmlinkage long sys_inotify_rm_watch(int fd, __s32 wd);
-
-asmlinkage long sys_spu_run(int fd, __u32 __user *unpc,
-				 __u32 __user *ustatus);
-asmlinkage long sys_spu_create(const char __user *name,
-		unsigned int flags, umode_t mode, int fd);
-
-asmlinkage long sys_mknodat(int dfd, const char __user * filename, umode_t mode,
-			    unsigned dev);
-asmlinkage long sys_mkdirat(int dfd, const char __user * pathname, umode_t mode);
-asmlinkage long sys_unlinkat(int dfd, const char __user * pathname, int flag);
-asmlinkage long sys_symlinkat(const char __user * oldname,
-			      int newdfd, const char __user * newname);
-asmlinkage long sys_linkat(int olddfd, const char __user *oldname,
-			   int newdfd, const char __user *newname, int flags);
-asmlinkage long sys_renameat(int olddfd, const char __user * oldname,
-			     int newdfd, const char __user * newname);
-asmlinkage long sys_futimesat(int dfd, const char __user *filename,
-			      struct timeval __user *utimes);
-asmlinkage long sys_faccessat(int dfd, const char __user *filename, int mode);
-asmlinkage long sys_fchmodat(int dfd, const char __user * filename,
-			     umode_t mode);
-asmlinkage long sys_fchownat(int dfd, const char __user *filename, uid_t user,
-			     gid_t group, int flag);
-asmlinkage long sys_openat(int dfd, const char __user *filename, int flags,
-			   umode_t mode);
-asmlinkage long sys_newfstatat(int dfd, const char __user *filename,
-			       struct stat __user *statbuf, int flag);
-asmlinkage long sys_fstatat64(int dfd, const char __user *filename,
-			       struct stat64 __user *statbuf, int flag);
-asmlinkage long sys_readlinkat(int dfd, const char __user *path, char __user *buf,
-			       int bufsiz);
-asmlinkage long sys_utimensat(int dfd, const char __user *filename,
-				struct timespec __user *utimes, int flags);
-asmlinkage long sys_unshare(unsigned long unshare_flags);
-
-asmlinkage long sys_splice(int fd_in, loff_t __user *off_in,
-			   int fd_out, loff_t __user *off_out,
-			   size_t len, unsigned int flags);
-
-asmlinkage long sys_vmsplice(int fd, const struct iovec __user *iov,
-			     unsigned long nr_segs, unsigned int flags);
-
-asmlinkage long sys_tee(int fdin, int fdout, size_t len, unsigned int flags);
-
-asmlinkage long sys_sync_file_range(int fd, loff_t offset, loff_t nbytes,
-					unsigned int flags);
-asmlinkage long sys_sync_file_range2(int fd, unsigned int flags,
-				     loff_t offset, loff_t nbytes);
-asmlinkage long sys_get_robust_list(int pid,
-				    struct robust_list_head __user * __user *head_ptr,
-				    size_t __user *len_ptr);
-asmlinkage long sys_set_robust_list(struct robust_list_head __user *head,
-				    size_t len);
-asmlinkage long sys_getcpu(unsigned __user *cpu, unsigned __user *node, struct getcpu_cache __user *cache);
-asmlinkage long sys_signalfd(int ufd, sigset_t __user *user_mask, size_t sizemask);
-asmlinkage long sys_signalfd4(int ufd, sigset_t __user *user_mask, size_t sizemask, int flags);
-asmlinkage long sys_timerfd_create(int clockid, int flags);
-asmlinkage long sys_timerfd_settime(int ufd, int flags,
-				    const struct itimerspec __user *utmr,
-				    struct itimerspec __user *otmr);
-asmlinkage long sys_timerfd_gettime(int ufd, struct itimerspec __user *otmr);
-asmlinkage long sys_eventfd(unsigned int count);
-asmlinkage long sys_eventfd2(unsigned int count, int flags);
-asmlinkage long sys_fallocate(int fd, int mode, loff_t offset, loff_t len);
-asmlinkage long sys_old_readdir(unsigned int, struct old_linux_dirent __user *, unsigned int);
-asmlinkage long sys_pselect6(int, fd_set __user *, fd_set __user *,
-			     fd_set __user *, struct timespec __user *,
-			     void __user *);
-asmlinkage long sys_ppoll(struct pollfd __user *, unsigned int,
-			  struct timespec __user *, const sigset_t __user *,
-			  size_t);
-asmlinkage long sys_fanotify_init(unsigned int flags, unsigned int event_f_flags);
-asmlinkage long sys_fanotify_mark(int fanotify_fd, unsigned int flags,
-				  u64 mask, int fd,
-				  const char  __user *pathname);
-asmlinkage long sys_syncfs(int fd);
-
-int kernel_execve(const char *filename, const char *const argv[], const char *const envp[]);
-
-
-asmlinkage long sys_perf_event_open(
-		struct perf_event_attr __user *attr_uptr,
-		pid_t pid, int cpu, int group_fd, unsigned long flags);
-
-asmlinkage long sys_mmap_pgoff(unsigned long addr, unsigned long len,
-			unsigned long prot, unsigned long flags,
-			unsigned long fd, unsigned long pgoff);
-asmlinkage long sys_old_mmap(struct mmap_arg_struct __user *arg);
-asmlinkage long sys_name_to_handle_at(int dfd, const char __user *name,
-				      struct file_handle __user *handle,
-				      int __user *mnt_id, int flag);
-asmlinkage long sys_open_by_handle_at(int mountdirfd,
-				      struct file_handle __user *handle,
-				      int flags);
-asmlinkage long sys_setns(int fd, int nstype);
-asmlinkage long sys_process_vm_readv(pid_t pid,
-				     const struct iovec __user *lvec,
-				     unsigned long liovcnt,
-				     const struct iovec __user *rvec,
-				     unsigned long riovcnt,
-				     unsigned long flags);
-asmlinkage long sys_process_vm_writev(pid_t pid,
-				      const struct iovec __user *lvec,
-				      unsigned long liovcnt,
-				      const struct iovec __user *rvec,
-				      unsigned long riovcnt,
-				      unsigned long flags);
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/syscore_ops.h b/ANDROID_3.4.5/include/linux/syscore_ops.h
deleted file mode 100644
index 27b3b0bc..00000000
--- a/ANDROID_3.4.5/include/linux/syscore_ops.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- *  syscore_ops.h - System core operations.
- *
- *  Copyright (C) 2011 Rafael J. Wysocki <rjw@sisk.pl>, Novell Inc.
- *
- *  This file is released under the GPLv2.
- */
-
-#ifndef _LINUX_SYSCORE_OPS_H
-#define _LINUX_SYSCORE_OPS_H
-
-#include <linux/list.h>
-
-struct syscore_ops {
-	struct list_head node;
-	int (*suspend)(void);
-	void (*resume)(void);
-	void (*shutdown)(void);
-};
-
-extern void register_syscore_ops(struct syscore_ops *ops);
-extern void unregister_syscore_ops(struct syscore_ops *ops);
-#ifdef CONFIG_PM_SLEEP
-extern int syscore_suspend(void);
-extern void syscore_resume(void);
-#endif
-extern void syscore_shutdown(void);
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/sysctl.h b/ANDROID_3.4.5/include/linux/sysctl.h
deleted file mode 100644
index c34b4c82..00000000
--- a/ANDROID_3.4.5/include/linux/sysctl.h
+++ /dev/null
@@ -1,1127 +0,0 @@
-/*
- * sysctl.h: General linux system control interface
- *
- * Begun 24 March 1995, Stephen Tweedie
- *
- ****************************************************************
- ****************************************************************
- **
- **  WARNING:
- **  The values in this file are exported to user space via 
- **  the sysctl() binary interface.  Do *NOT* change the
- **  numbering of any existing values here, and do not change
- **  any numbers within any one set of values.  If you have to
- **  redefine an existing interface, use a new number for it.
- **  The kernel will then return -ENOTDIR to any application using
- **  the old binary interface.
- **
- ****************************************************************
- ****************************************************************
- */
-
-#ifndef _LINUX_SYSCTL_H
-#define _LINUX_SYSCTL_H
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/compiler.h>
-
-struct completion;
-
-#define CTL_MAXNAME 10		/* how many path components do we allow in a
-				   call to sysctl?   In other words, what is
-				   the largest acceptable value for the nlen
-				   member of a struct __sysctl_args to have? */
-
-struct __sysctl_args {
-	int __user *name;
-	int nlen;
-	void __user *oldval;
-	size_t __user *oldlenp;
-	void __user *newval;
-	size_t newlen;
-	unsigned long __unused[4];
-};
-
-/* Define sysctl names first */
-
-/* Top-level names: */
-
-enum
-{
-	CTL_KERN=1,		/* General kernel info and control */
-	CTL_VM=2,		/* VM management */
-	CTL_NET=3,		/* Networking */
-	CTL_PROC=4,		/* removal breaks strace(1) compilation */
-	CTL_FS=5,		/* Filesystems */
-	CTL_DEBUG=6,		/* Debugging */
-	CTL_DEV=7,		/* Devices */
-	CTL_BUS=8,		/* Busses */
-	CTL_ABI=9,		/* Binary emulation */
-	CTL_CPU=10,		/* CPU stuff (speed scaling, etc) */
-	CTL_ARLAN=254,		/* arlan wireless driver */
-	CTL_S390DBF=5677,	/* s390 debug */
-	CTL_SUNRPC=7249,	/* sunrpc debug */
-	CTL_PM=9899,		/* frv power management */
-	CTL_FRV=9898,		/* frv specific sysctls */
-};
-
-/* CTL_BUS names: */
-enum
-{
-	CTL_BUS_ISA=1		/* ISA */
-};
-
-/* /proc/sys/fs/inotify/ */
-enum
-{
-	INOTIFY_MAX_USER_INSTANCES=1,	/* max instances per user */
-	INOTIFY_MAX_USER_WATCHES=2,	/* max watches per user */
-	INOTIFY_MAX_QUEUED_EVENTS=3	/* max queued events per instance */
-};
-
-/* CTL_KERN names: */
-enum
-{
-	KERN_OSTYPE=1,		/* string: system version */
-	KERN_OSRELEASE=2,	/* string: system release */
-	KERN_OSREV=3,		/* int: system revision */
-	KERN_VERSION=4,		/* string: compile time info */
-	KERN_SECUREMASK=5,	/* struct: maximum rights mask */
-	KERN_PROF=6,		/* table: profiling information */
-	KERN_NODENAME=7,	/* string: hostname */
-	KERN_DOMAINNAME=8,	/* string: domainname */
-
-	KERN_PANIC=15,		/* int: panic timeout */
-	KERN_REALROOTDEV=16,	/* real root device to mount after initrd */
-
-	KERN_SPARC_REBOOT=21,	/* reboot command on Sparc */
-	KERN_CTLALTDEL=22,	/* int: allow ctl-alt-del to reboot */
-	KERN_PRINTK=23,		/* struct: control printk logging parameters */
-	KERN_NAMETRANS=24,	/* Name translation */
-	KERN_PPC_HTABRECLAIM=25, /* turn htab reclaimation on/off on PPC */
-	KERN_PPC_ZEROPAGED=26,	/* turn idle page zeroing on/off on PPC */
-	KERN_PPC_POWERSAVE_NAP=27, /* use nap mode for power saving */
-	KERN_MODPROBE=28,	/* string: modprobe path */
-	KERN_SG_BIG_BUFF=29,	/* int: sg driver reserved buffer size */
-	KERN_ACCT=30,		/* BSD process accounting parameters */
-	KERN_PPC_L2CR=31,	/* l2cr register on PPC */
-
-	KERN_RTSIGNR=32,	/* Number of rt sigs queued */
-	KERN_RTSIGMAX=33,	/* Max queuable */
-	
-	KERN_SHMMAX=34,         /* long: Maximum shared memory segment */
-	KERN_MSGMAX=35,         /* int: Maximum size of a messege */
-	KERN_MSGMNB=36,         /* int: Maximum message queue size */
-	KERN_MSGPOOL=37,        /* int: Maximum system message pool size */
-	KERN_SYSRQ=38,		/* int: Sysreq enable */
-	KERN_MAX_THREADS=39,	/* int: Maximum nr of threads in the system */
- 	KERN_RANDOM=40,		/* Random driver */
- 	KERN_SHMALL=41,		/* int: Maximum size of shared memory */
- 	KERN_MSGMNI=42,		/* int: msg queue identifiers */
- 	KERN_SEM=43,		/* struct: sysv semaphore limits */
- 	KERN_SPARC_STOP_A=44,	/* int: Sparc Stop-A enable */
- 	KERN_SHMMNI=45,		/* int: shm array identifiers */
-	KERN_OVERFLOWUID=46,	/* int: overflow UID */
-	KERN_OVERFLOWGID=47,	/* int: overflow GID */
-	KERN_SHMPATH=48,	/* string: path to shm fs */
-	KERN_HOTPLUG=49,	/* string: path to uevent helper (deprecated) */
-	KERN_IEEE_EMULATION_WARNINGS=50, /* int: unimplemented ieee instructions */
-	KERN_S390_USER_DEBUG_LOGGING=51,  /* int: dumps of user faults */
-	KERN_CORE_USES_PID=52,		/* int: use core or core.%pid */
-	KERN_TAINTED=53,	/* int: various kernel tainted flags */
-	KERN_CADPID=54,		/* int: PID of the process to notify on CAD */
-	KERN_PIDMAX=55,		/* int: PID # limit */
-  	KERN_CORE_PATTERN=56,	/* string: pattern for core-file names */
-	KERN_PANIC_ON_OOPS=57,  /* int: whether we will panic on an oops */
-	KERN_HPPA_PWRSW=58,	/* int: hppa soft-power enable */
-	KERN_HPPA_UNALIGNED=59,	/* int: hppa unaligned-trap enable */
-	KERN_PRINTK_RATELIMIT=60, /* int: tune printk ratelimiting */
-	KERN_PRINTK_RATELIMIT_BURST=61,	/* int: tune printk ratelimiting */
-	KERN_PTY=62,		/* dir: pty driver */
-	KERN_NGROUPS_MAX=63,	/* int: NGROUPS_MAX */
-	KERN_SPARC_SCONS_PWROFF=64, /* int: serial console power-off halt */
-	KERN_HZ_TIMER=65,	/* int: hz timer on or off */
-	KERN_UNKNOWN_NMI_PANIC=66, /* int: unknown nmi panic flag */
-	KERN_BOOTLOADER_TYPE=67, /* int: boot loader type */
-	KERN_RANDOMIZE=68, /* int: randomize virtual address space */
-	KERN_SETUID_DUMPABLE=69, /* int: behaviour of dumps for setuid core */
-	KERN_SPIN_RETRY=70,	/* int: number of spinlock retries */
-	KERN_ACPI_VIDEO_FLAGS=71, /* int: flags for setting up video after ACPI sleep */
-	KERN_IA64_UNALIGNED=72, /* int: ia64 unaligned userland trap enable */
-	KERN_COMPAT_LOG=73,	/* int: print compat layer  messages */
-	KERN_MAX_LOCK_DEPTH=74, /* int: rtmutex's maximum lock depth */
-	KERN_NMI_WATCHDOG=75, /* int: enable/disable nmi watchdog */
-	KERN_PANIC_ON_NMI=76, /* int: whether we will panic on an unrecovered */
-};
-
-
-
-/* CTL_VM names: */
-enum
-{
-	VM_UNUSED1=1,		/* was: struct: Set vm swapping control */
-	VM_UNUSED2=2,		/* was; int: Linear or sqrt() swapout for hogs */
-	VM_UNUSED3=3,		/* was: struct: Set free page thresholds */
-	VM_UNUSED4=4,		/* Spare */
-	VM_OVERCOMMIT_MEMORY=5,	/* Turn off the virtual memory safety limit */
-	VM_UNUSED5=6,		/* was: struct: Set buffer memory thresholds */
-	VM_UNUSED7=7,		/* was: struct: Set cache memory thresholds */
-	VM_UNUSED8=8,		/* was: struct: Control kswapd behaviour */
-	VM_UNUSED9=9,		/* was: struct: Set page table cache parameters */
-	VM_PAGE_CLUSTER=10,	/* int: set number of pages to swap together */
-	VM_DIRTY_BACKGROUND=11,	/* dirty_background_ratio */
-	VM_DIRTY_RATIO=12,	/* dirty_ratio */
-	VM_DIRTY_WB_CS=13,	/* dirty_writeback_centisecs */
-	VM_DIRTY_EXPIRE_CS=14,	/* dirty_expire_centisecs */
-	VM_NR_PDFLUSH_THREADS=15, /* nr_pdflush_threads */
-	VM_OVERCOMMIT_RATIO=16, /* percent of RAM to allow overcommit in */
-	VM_PAGEBUF=17,		/* struct: Control pagebuf parameters */
-	VM_HUGETLB_PAGES=18,	/* int: Number of available Huge Pages */
-	VM_SWAPPINESS=19,	/* Tendency to steal mapped memory */
-	VM_LOWMEM_RESERVE_RATIO=20,/* reservation ratio for lower memory zones */
-	VM_MIN_FREE_KBYTES=21,	/* Minimum free kilobytes to maintain */
-	VM_MAX_MAP_COUNT=22,	/* int: Maximum number of mmaps/address-space */
-	VM_LAPTOP_MODE=23,	/* vm laptop mode */
-	VM_BLOCK_DUMP=24,	/* block dump mode */
-	VM_HUGETLB_GROUP=25,	/* permitted hugetlb group */
-	VM_VFS_CACHE_PRESSURE=26, /* dcache/icache reclaim pressure */
-	VM_LEGACY_VA_LAYOUT=27, /* legacy/compatibility virtual address space layout */
-	VM_SWAP_TOKEN_TIMEOUT=28, /* default time for token time out */
-	VM_DROP_PAGECACHE=29,	/* int: nuke lots of pagecache */
-	VM_PERCPU_PAGELIST_FRACTION=30,/* int: fraction of pages in each percpu_pagelist */
-	VM_ZONE_RECLAIM_MODE=31, /* reclaim local zone memory before going off node */
-	VM_MIN_UNMAPPED=32,	/* Set min percent of unmapped pages */
-	VM_PANIC_ON_OOM=33,	/* panic at out-of-memory */
-	VM_VDSO_ENABLED=34,	/* map VDSO into new processes? */
-	VM_MIN_SLAB=35,		 /* Percent pages ignored by zone reclaim */
-};
-
-
-/* CTL_NET names: */
-enum
-{
-	NET_CORE=1,
-	NET_ETHER=2,
-	NET_802=3,
-	NET_UNIX=4,
-	NET_IPV4=5,
-	NET_IPX=6,
-	NET_ATALK=7,
-	NET_NETROM=8,
-	NET_AX25=9,
-	NET_BRIDGE=10,
-	NET_ROSE=11,
-	NET_IPV6=12,
-	NET_X25=13,
-	NET_TR=14,
-	NET_DECNET=15,
-	NET_ECONET=16,
-	NET_SCTP=17,
-	NET_LLC=18,
-	NET_NETFILTER=19,
-	NET_DCCP=20,
-	NET_IRDA=412,
-};
-
-/* /proc/sys/kernel/random */
-enum
-{
-	RANDOM_POOLSIZE=1,
-	RANDOM_ENTROPY_COUNT=2,
-	RANDOM_READ_THRESH=3,
-	RANDOM_WRITE_THRESH=4,
-	RANDOM_BOOT_ID=5,
-	RANDOM_UUID=6
-};
-
-/* /proc/sys/kernel/pty */
-enum
-{
-	PTY_MAX=1,
-	PTY_NR=2
-};
-
-/* /proc/sys/bus/isa */
-enum
-{
-	BUS_ISA_MEM_BASE=1,
-	BUS_ISA_PORT_BASE=2,
-	BUS_ISA_PORT_SHIFT=3
-};
-
-/* /proc/sys/net/core */
-enum
-{
-	NET_CORE_WMEM_MAX=1,
-	NET_CORE_RMEM_MAX=2,
-	NET_CORE_WMEM_DEFAULT=3,
-	NET_CORE_RMEM_DEFAULT=4,
-/* was	NET_CORE_DESTROY_DELAY */
-	NET_CORE_MAX_BACKLOG=6,
-	NET_CORE_FASTROUTE=7,
-	NET_CORE_MSG_COST=8,
-	NET_CORE_MSG_BURST=9,
-	NET_CORE_OPTMEM_MAX=10,
-	NET_CORE_HOT_LIST_LENGTH=11,
-	NET_CORE_DIVERT_VERSION=12,
-	NET_CORE_NO_CONG_THRESH=13,
-	NET_CORE_NO_CONG=14,
-	NET_CORE_LO_CONG=15,
-	NET_CORE_MOD_CONG=16,
-	NET_CORE_DEV_WEIGHT=17,
-	NET_CORE_SOMAXCONN=18,
-	NET_CORE_BUDGET=19,
-	NET_CORE_AEVENT_ETIME=20,
-	NET_CORE_AEVENT_RSEQTH=21,
-	NET_CORE_WARNINGS=22,
-};
-
-/* /proc/sys/net/ethernet */
-
-/* /proc/sys/net/802 */
-
-/* /proc/sys/net/unix */
-
-enum
-{
-	NET_UNIX_DESTROY_DELAY=1,
-	NET_UNIX_DELETE_DELAY=2,
-	NET_UNIX_MAX_DGRAM_QLEN=3,
-};
-
-/* /proc/sys/net/netfilter */
-enum
-{
-	NET_NF_CONNTRACK_MAX=1,
-	NET_NF_CONNTRACK_TCP_TIMEOUT_SYN_SENT=2,
-	NET_NF_CONNTRACK_TCP_TIMEOUT_SYN_RECV=3,
-	NET_NF_CONNTRACK_TCP_TIMEOUT_ESTABLISHED=4,
-	NET_NF_CONNTRACK_TCP_TIMEOUT_FIN_WAIT=5,
-	NET_NF_CONNTRACK_TCP_TIMEOUT_CLOSE_WAIT=6,
-	NET_NF_CONNTRACK_TCP_TIMEOUT_LAST_ACK=7,
-	NET_NF_CONNTRACK_TCP_TIMEOUT_TIME_WAIT=8,
-	NET_NF_CONNTRACK_TCP_TIMEOUT_CLOSE=9,
-	NET_NF_CONNTRACK_UDP_TIMEOUT=10,
-	NET_NF_CONNTRACK_UDP_TIMEOUT_STREAM=11,
-	NET_NF_CONNTRACK_ICMP_TIMEOUT=12,
-	NET_NF_CONNTRACK_GENERIC_TIMEOUT=13,
-	NET_NF_CONNTRACK_BUCKETS=14,
-	NET_NF_CONNTRACK_LOG_INVALID=15,
-	NET_NF_CONNTRACK_TCP_TIMEOUT_MAX_RETRANS=16,
-	NET_NF_CONNTRACK_TCP_LOOSE=17,
-	NET_NF_CONNTRACK_TCP_BE_LIBERAL=18,
-	NET_NF_CONNTRACK_TCP_MAX_RETRANS=19,
-	NET_NF_CONNTRACK_SCTP_TIMEOUT_CLOSED=20,
-	NET_NF_CONNTRACK_SCTP_TIMEOUT_COOKIE_WAIT=21,
-	NET_NF_CONNTRACK_SCTP_TIMEOUT_COOKIE_ECHOED=22,
-	NET_NF_CONNTRACK_SCTP_TIMEOUT_ESTABLISHED=23,
-	NET_NF_CONNTRACK_SCTP_TIMEOUT_SHUTDOWN_SENT=24,
-	NET_NF_CONNTRACK_SCTP_TIMEOUT_SHUTDOWN_RECD=25,
-	NET_NF_CONNTRACK_SCTP_TIMEOUT_SHUTDOWN_ACK_SENT=26,
-	NET_NF_CONNTRACK_COUNT=27,
-	NET_NF_CONNTRACK_ICMPV6_TIMEOUT=28,
-	NET_NF_CONNTRACK_FRAG6_TIMEOUT=29,
-	NET_NF_CONNTRACK_FRAG6_LOW_THRESH=30,
-	NET_NF_CONNTRACK_FRAG6_HIGH_THRESH=31,
-	NET_NF_CONNTRACK_CHECKSUM=32,
-};
-
-/* /proc/sys/net/ipv4 */
-enum
-{
-	/* v2.0 compatibile variables */
-	NET_IPV4_FORWARD=8,
-	NET_IPV4_DYNADDR=9,
-
-	NET_IPV4_CONF=16,
-	NET_IPV4_NEIGH=17,
-	NET_IPV4_ROUTE=18,
-	NET_IPV4_FIB_HASH=19,
-	NET_IPV4_NETFILTER=20,
-
-	NET_IPV4_TCP_TIMESTAMPS=33,
-	NET_IPV4_TCP_WINDOW_SCALING=34,
-	NET_IPV4_TCP_SACK=35,
-	NET_IPV4_TCP_RETRANS_COLLAPSE=36,
-	NET_IPV4_DEFAULT_TTL=37,
-	NET_IPV4_AUTOCONFIG=38,
-	NET_IPV4_NO_PMTU_DISC=39,
-	NET_IPV4_TCP_SYN_RETRIES=40,
-	NET_IPV4_IPFRAG_HIGH_THRESH=41,
-	NET_IPV4_IPFRAG_LOW_THRESH=42,
-	NET_IPV4_IPFRAG_TIME=43,
-	NET_IPV4_TCP_MAX_KA_PROBES=44,
-	NET_IPV4_TCP_KEEPALIVE_TIME=45,
-	NET_IPV4_TCP_KEEPALIVE_PROBES=46,
-	NET_IPV4_TCP_RETRIES1=47,
-	NET_IPV4_TCP_RETRIES2=48,
-	NET_IPV4_TCP_FIN_TIMEOUT=49,
-	NET_IPV4_IP_MASQ_DEBUG=50,
-	NET_TCP_SYNCOOKIES=51,
-	NET_TCP_STDURG=52,
-	NET_TCP_RFC1337=53,
-	NET_TCP_SYN_TAILDROP=54,
-	NET_TCP_MAX_SYN_BACKLOG=55,
-	NET_IPV4_LOCAL_PORT_RANGE=56,
-	NET_IPV4_ICMP_ECHO_IGNORE_ALL=57,
-	NET_IPV4_ICMP_ECHO_IGNORE_BROADCASTS=58,
-	NET_IPV4_ICMP_SOURCEQUENCH_RATE=59,
-	NET_IPV4_ICMP_DESTUNREACH_RATE=60,
-	NET_IPV4_ICMP_TIMEEXCEED_RATE=61,
-	NET_IPV4_ICMP_PARAMPROB_RATE=62,
-	NET_IPV4_ICMP_ECHOREPLY_RATE=63,
-	NET_IPV4_ICMP_IGNORE_BOGUS_ERROR_RESPONSES=64,
-	NET_IPV4_IGMP_MAX_MEMBERSHIPS=65,
-	NET_TCP_TW_RECYCLE=66,
-	NET_IPV4_ALWAYS_DEFRAG=67,
-	NET_IPV4_TCP_KEEPALIVE_INTVL=68,
-	NET_IPV4_INET_PEER_THRESHOLD=69,
-	NET_IPV4_INET_PEER_MINTTL=70,
-	NET_IPV4_INET_PEER_MAXTTL=71,
-	NET_IPV4_INET_PEER_GC_MINTIME=72,
-	NET_IPV4_INET_PEER_GC_MAXTIME=73,
-	NET_TCP_ORPHAN_RETRIES=74,
-	NET_TCP_ABORT_ON_OVERFLOW=75,
-	NET_TCP_SYNACK_RETRIES=76,
-	NET_TCP_MAX_ORPHANS=77,
-	NET_TCP_MAX_TW_BUCKETS=78,
-	NET_TCP_FACK=79,
-	NET_TCP_REORDERING=80,
-	NET_TCP_ECN=81,
-	NET_TCP_DSACK=82,
-	NET_TCP_MEM=83,
-	NET_TCP_WMEM=84,
-	NET_TCP_RMEM=85,
-	NET_TCP_APP_WIN=86,
-	NET_TCP_ADV_WIN_SCALE=87,
-	NET_IPV4_NONLOCAL_BIND=88,
-	NET_IPV4_ICMP_RATELIMIT=89,
-	NET_IPV4_ICMP_RATEMASK=90,
-	NET_TCP_TW_REUSE=91,
-	NET_TCP_FRTO=92,
-	NET_TCP_LOW_LATENCY=93,
-	NET_IPV4_IPFRAG_SECRET_INTERVAL=94,
-	NET_IPV4_IGMP_MAX_MSF=96,
-	NET_TCP_NO_METRICS_SAVE=97,
-	NET_TCP_DEFAULT_WIN_SCALE=105,
-	NET_TCP_MODERATE_RCVBUF=106,
-	NET_TCP_TSO_WIN_DIVISOR=107,
-	NET_TCP_BIC_BETA=108,
-	NET_IPV4_ICMP_ERRORS_USE_INBOUND_IFADDR=109,
-	NET_TCP_CONG_CONTROL=110,
-	NET_TCP_ABC=111,
-	NET_IPV4_IPFRAG_MAX_DIST=112,
- 	NET_TCP_MTU_PROBING=113,
-	NET_TCP_BASE_MSS=114,
-	NET_IPV4_TCP_WORKAROUND_SIGNED_WINDOWS=115,
-	NET_TCP_DMA_COPYBREAK=116,
-	NET_TCP_SLOW_START_AFTER_IDLE=117,
-	NET_CIPSOV4_CACHE_ENABLE=118,
-	NET_CIPSOV4_CACHE_BUCKET_SIZE=119,
-	NET_CIPSOV4_RBM_OPTFMT=120,
-	NET_CIPSOV4_RBM_STRICTVALID=121,
-	NET_TCP_AVAIL_CONG_CONTROL=122,
-	NET_TCP_ALLOWED_CONG_CONTROL=123,
-	NET_TCP_MAX_SSTHRESH=124,
-	NET_TCP_FRTO_RESPONSE=125,
-};
-
-enum {
-	NET_IPV4_ROUTE_FLUSH=1,
-	NET_IPV4_ROUTE_MIN_DELAY=2, /* obsolete since 2.6.25 */
-	NET_IPV4_ROUTE_MAX_DELAY=3, /* obsolete since 2.6.25 */
-	NET_IPV4_ROUTE_GC_THRESH=4,
-	NET_IPV4_ROUTE_MAX_SIZE=5,
-	NET_IPV4_ROUTE_GC_MIN_INTERVAL=6,
-	NET_IPV4_ROUTE_GC_TIMEOUT=7,
-	NET_IPV4_ROUTE_GC_INTERVAL=8, /* obsolete since 2.6.38 */
-	NET_IPV4_ROUTE_REDIRECT_LOAD=9,
-	NET_IPV4_ROUTE_REDIRECT_NUMBER=10,
-	NET_IPV4_ROUTE_REDIRECT_SILENCE=11,
-	NET_IPV4_ROUTE_ERROR_COST=12,
-	NET_IPV4_ROUTE_ERROR_BURST=13,
-	NET_IPV4_ROUTE_GC_ELASTICITY=14,
-	NET_IPV4_ROUTE_MTU_EXPIRES=15,
-	NET_IPV4_ROUTE_MIN_PMTU=16,
-	NET_IPV4_ROUTE_MIN_ADVMSS=17,
-	NET_IPV4_ROUTE_SECRET_INTERVAL=18,
-	NET_IPV4_ROUTE_GC_MIN_INTERVAL_MS=19,
-};
-
-enum
-{
-	NET_PROTO_CONF_ALL=-2,
-	NET_PROTO_CONF_DEFAULT=-3
-
-	/* And device ifindices ... */
-};
-
-enum
-{
-	NET_IPV4_CONF_FORWARDING=1,
-	NET_IPV4_CONF_MC_FORWARDING=2,
-	NET_IPV4_CONF_PROXY_ARP=3,
-	NET_IPV4_CONF_ACCEPT_REDIRECTS=4,
-	NET_IPV4_CONF_SECURE_REDIRECTS=5,
-	NET_IPV4_CONF_SEND_REDIRECTS=6,
-	NET_IPV4_CONF_SHARED_MEDIA=7,
-	NET_IPV4_CONF_RP_FILTER=8,
-	NET_IPV4_CONF_ACCEPT_SOURCE_ROUTE=9,
-	NET_IPV4_CONF_BOOTP_RELAY=10,
-	NET_IPV4_CONF_LOG_MARTIANS=11,
-	NET_IPV4_CONF_TAG=12,
-	NET_IPV4_CONF_ARPFILTER=13,
-	NET_IPV4_CONF_MEDIUM_ID=14,
-	NET_IPV4_CONF_NOXFRM=15,
-	NET_IPV4_CONF_NOPOLICY=16,
-	NET_IPV4_CONF_FORCE_IGMP_VERSION=17,
-	NET_IPV4_CONF_ARP_ANNOUNCE=18,
-	NET_IPV4_CONF_ARP_IGNORE=19,
-	NET_IPV4_CONF_PROMOTE_SECONDARIES=20,
-	NET_IPV4_CONF_ARP_ACCEPT=21,
-	NET_IPV4_CONF_ARP_NOTIFY=22,
-};
-
-/* /proc/sys/net/ipv4/netfilter */
-enum
-{
-	NET_IPV4_NF_CONNTRACK_MAX=1,
-	NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_SYN_SENT=2,
-	NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_SYN_RECV=3,
-	NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_ESTABLISHED=4,
-	NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_FIN_WAIT=5,
-	NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_CLOSE_WAIT=6,
-	NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_LAST_ACK=7,
-	NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_TIME_WAIT=8,
-	NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_CLOSE=9,
-	NET_IPV4_NF_CONNTRACK_UDP_TIMEOUT=10,
-	NET_IPV4_NF_CONNTRACK_UDP_TIMEOUT_STREAM=11,
-	NET_IPV4_NF_CONNTRACK_ICMP_TIMEOUT=12,
-	NET_IPV4_NF_CONNTRACK_GENERIC_TIMEOUT=13,
-	NET_IPV4_NF_CONNTRACK_BUCKETS=14,
-	NET_IPV4_NF_CONNTRACK_LOG_INVALID=15,
-	NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_MAX_RETRANS=16,
-	NET_IPV4_NF_CONNTRACK_TCP_LOOSE=17,
-	NET_IPV4_NF_CONNTRACK_TCP_BE_LIBERAL=18,
-	NET_IPV4_NF_CONNTRACK_TCP_MAX_RETRANS=19,
- 	NET_IPV4_NF_CONNTRACK_SCTP_TIMEOUT_CLOSED=20,
- 	NET_IPV4_NF_CONNTRACK_SCTP_TIMEOUT_COOKIE_WAIT=21,
- 	NET_IPV4_NF_CONNTRACK_SCTP_TIMEOUT_COOKIE_ECHOED=22,
- 	NET_IPV4_NF_CONNTRACK_SCTP_TIMEOUT_ESTABLISHED=23,
- 	NET_IPV4_NF_CONNTRACK_SCTP_TIMEOUT_SHUTDOWN_SENT=24,
- 	NET_IPV4_NF_CONNTRACK_SCTP_TIMEOUT_SHUTDOWN_RECD=25,
- 	NET_IPV4_NF_CONNTRACK_SCTP_TIMEOUT_SHUTDOWN_ACK_SENT=26,
-	NET_IPV4_NF_CONNTRACK_COUNT=27,
-	NET_IPV4_NF_CONNTRACK_CHECKSUM=28,
-};
- 
-/* /proc/sys/net/ipv6 */
-enum {
-	NET_IPV6_CONF=16,
-	NET_IPV6_NEIGH=17,
-	NET_IPV6_ROUTE=18,
-	NET_IPV6_ICMP=19,
-	NET_IPV6_BINDV6ONLY=20,
-	NET_IPV6_IP6FRAG_HIGH_THRESH=21,
-	NET_IPV6_IP6FRAG_LOW_THRESH=22,
-	NET_IPV6_IP6FRAG_TIME=23,
-	NET_IPV6_IP6FRAG_SECRET_INTERVAL=24,
-	NET_IPV6_MLD_MAX_MSF=25,
-};
-
-enum {
-	NET_IPV6_ROUTE_FLUSH=1,
-	NET_IPV6_ROUTE_GC_THRESH=2,
-	NET_IPV6_ROUTE_MAX_SIZE=3,
-	NET_IPV6_ROUTE_GC_MIN_INTERVAL=4,
-	NET_IPV6_ROUTE_GC_TIMEOUT=5,
-	NET_IPV6_ROUTE_GC_INTERVAL=6,
-	NET_IPV6_ROUTE_GC_ELASTICITY=7,
-	NET_IPV6_ROUTE_MTU_EXPIRES=8,
-	NET_IPV6_ROUTE_MIN_ADVMSS=9,
-	NET_IPV6_ROUTE_GC_MIN_INTERVAL_MS=10
-};
-
-enum {
-	NET_IPV6_FORWARDING=1,
-	NET_IPV6_HOP_LIMIT=2,
-	NET_IPV6_MTU=3,
-	NET_IPV6_ACCEPT_RA=4,
-	NET_IPV6_ACCEPT_REDIRECTS=5,
-	NET_IPV6_AUTOCONF=6,
-	NET_IPV6_DAD_TRANSMITS=7,
-	NET_IPV6_RTR_SOLICITS=8,
-	NET_IPV6_RTR_SOLICIT_INTERVAL=9,
-	NET_IPV6_RTR_SOLICIT_DELAY=10,
-	NET_IPV6_USE_TEMPADDR=11,
-	NET_IPV6_TEMP_VALID_LFT=12,
-	NET_IPV6_TEMP_PREFERED_LFT=13,
-	NET_IPV6_REGEN_MAX_RETRY=14,
-	NET_IPV6_MAX_DESYNC_FACTOR=15,
-	NET_IPV6_MAX_ADDRESSES=16,
-	NET_IPV6_FORCE_MLD_VERSION=17,
-	NET_IPV6_ACCEPT_RA_DEFRTR=18,
-	NET_IPV6_ACCEPT_RA_PINFO=19,
-	NET_IPV6_ACCEPT_RA_RTR_PREF=20,
-	NET_IPV6_RTR_PROBE_INTERVAL=21,
-	NET_IPV6_ACCEPT_RA_RT_INFO_MAX_PLEN=22,
-	NET_IPV6_PROXY_NDP=23,
-	NET_IPV6_ACCEPT_SOURCE_ROUTE=25,
-	__NET_IPV6_MAX
-};
-
-/* /proc/sys/net/ipv6/icmp */
-enum {
-	NET_IPV6_ICMP_RATELIMIT=1
-};
-
-/* /proc/sys/net/<protocol>/neigh/<dev> */
-enum {
-	NET_NEIGH_MCAST_SOLICIT=1,
-	NET_NEIGH_UCAST_SOLICIT=2,
-	NET_NEIGH_APP_SOLICIT=3,
-	NET_NEIGH_RETRANS_TIME=4,
-	NET_NEIGH_REACHABLE_TIME=5,
-	NET_NEIGH_DELAY_PROBE_TIME=6,
-	NET_NEIGH_GC_STALE_TIME=7,
-	NET_NEIGH_UNRES_QLEN=8,
-	NET_NEIGH_PROXY_QLEN=9,
-	NET_NEIGH_ANYCAST_DELAY=10,
-	NET_NEIGH_PROXY_DELAY=11,
-	NET_NEIGH_LOCKTIME=12,
-	NET_NEIGH_GC_INTERVAL=13,
-	NET_NEIGH_GC_THRESH1=14,
-	NET_NEIGH_GC_THRESH2=15,
-	NET_NEIGH_GC_THRESH3=16,
-	NET_NEIGH_RETRANS_TIME_MS=17,
-	NET_NEIGH_REACHABLE_TIME_MS=18,
-};
-
-/* /proc/sys/net/dccp */
-enum {
-	NET_DCCP_DEFAULT=1,
-};
-
-/* /proc/sys/net/ipx */
-enum {
-	NET_IPX_PPROP_BROADCASTING=1,
-	NET_IPX_FORWARDING=2
-};
-
-/* /proc/sys/net/llc */
-enum {
-	NET_LLC2=1,
-	NET_LLC_STATION=2,
-};
-
-/* /proc/sys/net/llc/llc2 */
-enum {
-	NET_LLC2_TIMEOUT=1,
-};
-
-/* /proc/sys/net/llc/station */
-enum {
-	NET_LLC_STATION_ACK_TIMEOUT=1,
-};
-
-/* /proc/sys/net/llc/llc2/timeout */
-enum {
-	NET_LLC2_ACK_TIMEOUT=1,
-	NET_LLC2_P_TIMEOUT=2,
-	NET_LLC2_REJ_TIMEOUT=3,
-	NET_LLC2_BUSY_TIMEOUT=4,
-};
-
-/* /proc/sys/net/appletalk */
-enum {
-	NET_ATALK_AARP_EXPIRY_TIME=1,
-	NET_ATALK_AARP_TICK_TIME=2,
-	NET_ATALK_AARP_RETRANSMIT_LIMIT=3,
-	NET_ATALK_AARP_RESOLVE_TIME=4
-};
-
-
-/* /proc/sys/net/netrom */
-enum {
-	NET_NETROM_DEFAULT_PATH_QUALITY=1,
-	NET_NETROM_OBSOLESCENCE_COUNT_INITIALISER=2,
-	NET_NETROM_NETWORK_TTL_INITIALISER=3,
-	NET_NETROM_TRANSPORT_TIMEOUT=4,
-	NET_NETROM_TRANSPORT_MAXIMUM_TRIES=5,
-	NET_NETROM_TRANSPORT_ACKNOWLEDGE_DELAY=6,
-	NET_NETROM_TRANSPORT_BUSY_DELAY=7,
-	NET_NETROM_TRANSPORT_REQUESTED_WINDOW_SIZE=8,
-	NET_NETROM_TRANSPORT_NO_ACTIVITY_TIMEOUT=9,
-	NET_NETROM_ROUTING_CONTROL=10,
-	NET_NETROM_LINK_FAILS_COUNT=11,
-	NET_NETROM_RESET=12
-};
-
-/* /proc/sys/net/ax25 */
-enum {
-	NET_AX25_IP_DEFAULT_MODE=1,
-	NET_AX25_DEFAULT_MODE=2,
-	NET_AX25_BACKOFF_TYPE=3,
-	NET_AX25_CONNECT_MODE=4,
-	NET_AX25_STANDARD_WINDOW=5,
-	NET_AX25_EXTENDED_WINDOW=6,
-	NET_AX25_T1_TIMEOUT=7,
-	NET_AX25_T2_TIMEOUT=8,
-	NET_AX25_T3_TIMEOUT=9,
-	NET_AX25_IDLE_TIMEOUT=10,
-	NET_AX25_N2=11,
-	NET_AX25_PACLEN=12,
-	NET_AX25_PROTOCOL=13,
-	NET_AX25_DAMA_SLAVE_TIMEOUT=14
-};
-
-/* /proc/sys/net/rose */
-enum {
-	NET_ROSE_RESTART_REQUEST_TIMEOUT=1,
-	NET_ROSE_CALL_REQUEST_TIMEOUT=2,
-	NET_ROSE_RESET_REQUEST_TIMEOUT=3,
-	NET_ROSE_CLEAR_REQUEST_TIMEOUT=4,
-	NET_ROSE_ACK_HOLD_BACK_TIMEOUT=5,
-	NET_ROSE_ROUTING_CONTROL=6,
-	NET_ROSE_LINK_FAIL_TIMEOUT=7,
-	NET_ROSE_MAX_VCS=8,
-	NET_ROSE_WINDOW_SIZE=9,
-	NET_ROSE_NO_ACTIVITY_TIMEOUT=10
-};
-
-/* /proc/sys/net/x25 */
-enum {
-	NET_X25_RESTART_REQUEST_TIMEOUT=1,
-	NET_X25_CALL_REQUEST_TIMEOUT=2,
-	NET_X25_RESET_REQUEST_TIMEOUT=3,
-	NET_X25_CLEAR_REQUEST_TIMEOUT=4,
-	NET_X25_ACK_HOLD_BACK_TIMEOUT=5,
-	NET_X25_FORWARD=6
-};
-
-/* /proc/sys/net/token-ring */
-enum
-{
-	NET_TR_RIF_TIMEOUT=1
-};
-
-/* /proc/sys/net/decnet/ */
-enum {
-	NET_DECNET_NODE_TYPE = 1,
-	NET_DECNET_NODE_ADDRESS = 2,
-	NET_DECNET_NODE_NAME = 3,
-	NET_DECNET_DEFAULT_DEVICE = 4,
-	NET_DECNET_TIME_WAIT = 5,
-	NET_DECNET_DN_COUNT = 6,
-	NET_DECNET_DI_COUNT = 7,
-	NET_DECNET_DR_COUNT = 8,
-	NET_DECNET_DST_GC_INTERVAL = 9,
-	NET_DECNET_CONF = 10,
-	NET_DECNET_NO_FC_MAX_CWND = 11,
-	NET_DECNET_MEM = 12,
-	NET_DECNET_RMEM = 13,
-	NET_DECNET_WMEM = 14,
-	NET_DECNET_DEBUG_LEVEL = 255
-};
-
-/* /proc/sys/net/decnet/conf/<dev> */
-enum {
-	NET_DECNET_CONF_LOOPBACK = -2,
-	NET_DECNET_CONF_DDCMP = -3,
-	NET_DECNET_CONF_PPP = -4,
-	NET_DECNET_CONF_X25 = -5,
-	NET_DECNET_CONF_GRE = -6,
-	NET_DECNET_CONF_ETHER = -7
-
-	/* ... and ifindex of devices */
-};
-
-/* /proc/sys/net/decnet/conf/<dev>/ */
-enum {
-	NET_DECNET_CONF_DEV_PRIORITY = 1,
-	NET_DECNET_CONF_DEV_T1 = 2,
-	NET_DECNET_CONF_DEV_T2 = 3,
-	NET_DECNET_CONF_DEV_T3 = 4,
-	NET_DECNET_CONF_DEV_FORWARDING = 5,
-	NET_DECNET_CONF_DEV_BLKSIZE = 6,
-	NET_DECNET_CONF_DEV_STATE = 7
-};
-
-/* /proc/sys/net/sctp */
-enum {
-	NET_SCTP_RTO_INITIAL = 1,
-	NET_SCTP_RTO_MIN     = 2,
-	NET_SCTP_RTO_MAX     = 3,
-	NET_SCTP_RTO_ALPHA   = 4,
-	NET_SCTP_RTO_BETA    = 5,
-	NET_SCTP_VALID_COOKIE_LIFE       =  6,
-	NET_SCTP_ASSOCIATION_MAX_RETRANS =  7,
-	NET_SCTP_PATH_MAX_RETRANS        =  8,
-	NET_SCTP_MAX_INIT_RETRANSMITS    =  9,
-	NET_SCTP_HB_INTERVAL             = 10,
-	NET_SCTP_PRESERVE_ENABLE         = 11,
-	NET_SCTP_MAX_BURST               = 12,
-	NET_SCTP_ADDIP_ENABLE		 = 13,
-	NET_SCTP_PRSCTP_ENABLE		 = 14,
-	NET_SCTP_SNDBUF_POLICY		 = 15,
-	NET_SCTP_SACK_TIMEOUT		 = 16,
-	NET_SCTP_RCVBUF_POLICY		 = 17,
-};
-
-/* /proc/sys/net/bridge */
-enum {
-	NET_BRIDGE_NF_CALL_ARPTABLES = 1,
-	NET_BRIDGE_NF_CALL_IPTABLES = 2,
-	NET_BRIDGE_NF_CALL_IP6TABLES = 3,
-	NET_BRIDGE_NF_FILTER_VLAN_TAGGED = 4,
-	NET_BRIDGE_NF_FILTER_PPPOE_TAGGED = 5,
-};
-
-/* proc/sys/net/irda */
-enum {
-	NET_IRDA_DISCOVERY=1,
-	NET_IRDA_DEVNAME=2,
-	NET_IRDA_DEBUG=3,
-	NET_IRDA_FAST_POLL=4,
-	NET_IRDA_DISCOVERY_SLOTS=5,
-	NET_IRDA_DISCOVERY_TIMEOUT=6,
-	NET_IRDA_SLOT_TIMEOUT=7,
-	NET_IRDA_MAX_BAUD_RATE=8,
-	NET_IRDA_MIN_TX_TURN_TIME=9,
-	NET_IRDA_MAX_TX_DATA_SIZE=10,
-	NET_IRDA_MAX_TX_WINDOW=11,
-	NET_IRDA_MAX_NOREPLY_TIME=12,
-	NET_IRDA_WARN_NOREPLY_TIME=13,
-	NET_IRDA_LAP_KEEPALIVE_TIME=14,
-};
-
-
-/* CTL_FS names: */
-enum
-{
-	FS_NRINODE=1,	/* int:current number of allocated inodes */
-	FS_STATINODE=2,
-	FS_MAXINODE=3,	/* int:maximum number of inodes that can be allocated */
-	FS_NRDQUOT=4,	/* int:current number of allocated dquots */
-	FS_MAXDQUOT=5,	/* int:maximum number of dquots that can be allocated */
-	FS_NRFILE=6,	/* int:current number of allocated filedescriptors */
-	FS_MAXFILE=7,	/* int:maximum number of filedescriptors that can be allocated */
-	FS_DENTRY=8,
-	FS_NRSUPER=9,	/* int:current number of allocated super_blocks */
-	FS_MAXSUPER=10,	/* int:maximum number of super_blocks that can be allocated */
-	FS_OVERFLOWUID=11,	/* int: overflow UID */
-	FS_OVERFLOWGID=12,	/* int: overflow GID */
-	FS_LEASES=13,	/* int: leases enabled */
-	FS_DIR_NOTIFY=14,	/* int: directory notification enabled */
-	FS_LEASE_TIME=15,	/* int: maximum time to wait for a lease break */
-	FS_DQSTATS=16,	/* disc quota usage statistics and control */
-	FS_XFS=17,	/* struct: control xfs parameters */
-	FS_AIO_NR=18,	/* current system-wide number of aio requests */
-	FS_AIO_MAX_NR=19,	/* system-wide maximum number of aio requests */
-	FS_INOTIFY=20,	/* inotify submenu */
-	FS_OCFS2=988,	/* ocfs2 */
-};
-
-/* /proc/sys/fs/quota/ */
-enum {
-	FS_DQ_LOOKUPS = 1,
-	FS_DQ_DROPS = 2,
-	FS_DQ_READS = 3,
-	FS_DQ_WRITES = 4,
-	FS_DQ_CACHE_HITS = 5,
-	FS_DQ_ALLOCATED = 6,
-	FS_DQ_FREE = 7,
-	FS_DQ_SYNCS = 8,
-	FS_DQ_WARNINGS = 9,
-};
-
-/* CTL_DEBUG names: */
-
-/* CTL_DEV names: */
-enum {
-	DEV_CDROM=1,
-	DEV_HWMON=2,
-	DEV_PARPORT=3,
-	DEV_RAID=4,
-	DEV_MAC_HID=5,
-	DEV_SCSI=6,
-	DEV_IPMI=7,
-};
-
-/* /proc/sys/dev/cdrom */
-enum {
-	DEV_CDROM_INFO=1,
-	DEV_CDROM_AUTOCLOSE=2,
-	DEV_CDROM_AUTOEJECT=3,
-	DEV_CDROM_DEBUG=4,
-	DEV_CDROM_LOCK=5,
-	DEV_CDROM_CHECK_MEDIA=6
-};
-
-/* /proc/sys/dev/parport */
-enum {
-	DEV_PARPORT_DEFAULT=-3
-};
-
-/* /proc/sys/dev/raid */
-enum {
-	DEV_RAID_SPEED_LIMIT_MIN=1,
-	DEV_RAID_SPEED_LIMIT_MAX=2
-};
-
-/* /proc/sys/dev/parport/default */
-enum {
-	DEV_PARPORT_DEFAULT_TIMESLICE=1,
-	DEV_PARPORT_DEFAULT_SPINTIME=2
-};
-
-/* /proc/sys/dev/parport/parport n */
-enum {
-	DEV_PARPORT_SPINTIME=1,
-	DEV_PARPORT_BASE_ADDR=2,
-	DEV_PARPORT_IRQ=3,
-	DEV_PARPORT_DMA=4,
-	DEV_PARPORT_MODES=5,
-	DEV_PARPORT_DEVICES=6,
-	DEV_PARPORT_AUTOPROBE=16
-};
-
-/* /proc/sys/dev/parport/parport n/devices/ */
-enum {
-	DEV_PARPORT_DEVICES_ACTIVE=-3,
-};
-
-/* /proc/sys/dev/parport/parport n/devices/device n */
-enum {
-	DEV_PARPORT_DEVICE_TIMESLICE=1,
-};
-
-/* /proc/sys/dev/mac_hid */
-enum {
-	DEV_MAC_HID_KEYBOARD_SENDS_LINUX_KEYCODES=1,
-	DEV_MAC_HID_KEYBOARD_LOCK_KEYCODES=2,
-	DEV_MAC_HID_MOUSE_BUTTON_EMULATION=3,
-	DEV_MAC_HID_MOUSE_BUTTON2_KEYCODE=4,
-	DEV_MAC_HID_MOUSE_BUTTON3_KEYCODE=5,
-	DEV_MAC_HID_ADB_MOUSE_SENDS_KEYCODES=6
-};
-
-/* /proc/sys/dev/scsi */
-enum {
-	DEV_SCSI_LOGGING_LEVEL=1,
-};
-
-/* /proc/sys/dev/ipmi */
-enum {
-	DEV_IPMI_POWEROFF_POWERCYCLE=1,
-};
-
-/* /proc/sys/abi */
-enum
-{
-	ABI_DEFHANDLER_COFF=1,	/* default handler for coff binaries */
-	ABI_DEFHANDLER_ELF=2, 	/* default handler for ELF binaries */
-	ABI_DEFHANDLER_LCALL7=3,/* default handler for procs using lcall7 */
-	ABI_DEFHANDLER_LIBCSO=4,/* default handler for an libc.so ELF interp */
-	ABI_TRACE=5,		/* tracing flags */
-	ABI_FAKE_UTSNAME=6,	/* fake target utsname information */
-};
-
-#ifdef __KERNEL__
-#include <linux/list.h>
-#include <linux/rcupdate.h>
-#include <linux/wait.h>
-#include <linux/rbtree.h>
-
-/* For the /proc/sys support */
-struct ctl_table;
-struct nsproxy;
-struct ctl_table_root;
-struct ctl_table_header;
-struct ctl_dir;
-
-typedef struct ctl_table ctl_table;
-
-typedef int proc_handler (struct ctl_table *ctl, int write,
-			  void __user *buffer, size_t *lenp, loff_t *ppos);
-
-extern int proc_dostring(struct ctl_table *, int,
-			 void __user *, size_t *, loff_t *);
-extern int proc_dointvec(struct ctl_table *, int,
-			 void __user *, size_t *, loff_t *);
-extern int proc_dointvec_minmax(struct ctl_table *, int,
-				void __user *, size_t *, loff_t *);
-extern int proc_dointvec_jiffies(struct ctl_table *, int,
-				 void __user *, size_t *, loff_t *);
-extern int proc_dointvec_userhz_jiffies(struct ctl_table *, int,
-					void __user *, size_t *, loff_t *);
-extern int proc_dointvec_ms_jiffies(struct ctl_table *, int,
-				    void __user *, size_t *, loff_t *);
-extern int proc_doulongvec_minmax(struct ctl_table *, int,
-				  void __user *, size_t *, loff_t *);
-extern int proc_doulongvec_ms_jiffies_minmax(struct ctl_table *table, int,
-				      void __user *, size_t *, loff_t *);
-extern int proc_do_large_bitmap(struct ctl_table *, int,
-				void __user *, size_t *, loff_t *);
-
-/*
- * Register a set of sysctl names by calling register_sysctl_table
- * with an initialised array of struct ctl_table's.  An entry with 
- * NULL procname terminates the table.  table->de will be
- * set up by the registration and need not be initialised in advance.
- *
- * sysctl names can be mirrored automatically under /proc/sys.  The
- * procname supplied controls /proc naming.
- *
- * The table's mode will be honoured both for sys_sysctl(2) and
- * proc-fs access.
- *
- * Leaf nodes in the sysctl tree will be represented by a single file
- * under /proc; non-leaf nodes will be represented by directories.  A
- * null procname disables /proc mirroring at this node.
- *
- * sysctl(2) can automatically manage read and write requests through
- * the sysctl table.  The data and maxlen fields of the ctl_table
- * struct enable minimal validation of the values being written to be
- * performed, and the mode field allows minimal authentication.
- * 
- * There must be a proc_handler routine for any terminal nodes
- * mirrored under /proc/sys (non-terminals are handled by a built-in
- * directory handler).  Several default handlers are available to
- * cover common cases.
- */
-
-/* Support for userspace poll() to watch for changes */
-struct ctl_table_poll {
-	atomic_t event;
-	wait_queue_head_t wait;
-};
-
-static inline void *proc_sys_poll_event(struct ctl_table_poll *poll)
-{
-	return (void *)(unsigned long)atomic_read(&poll->event);
-}
-
-#define __CTL_TABLE_POLL_INITIALIZER(name) {				\
-	.event = ATOMIC_INIT(0),					\
-	.wait = __WAIT_QUEUE_HEAD_INITIALIZER(name.wait) }
-
-#define DEFINE_CTL_TABLE_POLL(name)					\
-	struct ctl_table_poll name = __CTL_TABLE_POLL_INITIALIZER(name)
-
-/* A sysctl table is an array of struct ctl_table: */
-struct ctl_table 
-{
-	const char *procname;		/* Text ID for /proc/sys, or zero */
-	void *data;
-	int maxlen;
-	umode_t mode;
-	struct ctl_table *child;	/* Deprecated */
-	proc_handler *proc_handler;	/* Callback for text formatting */
-	struct ctl_table_poll *poll;
-	void *extra1;
-	void *extra2;
-};
-
-struct ctl_node {
-	struct rb_node node;
-	struct ctl_table_header *header;
-};
-
-/* struct ctl_table_header is used to maintain dynamic lists of
-   struct ctl_table trees. */
-struct ctl_table_header
-{
-	union {
-		struct {
-			struct ctl_table *ctl_table;
-			int used;
-			int count;
-			int nreg;
-		};
-		struct rcu_head rcu;
-	};
-	struct completion *unregistering;
-	struct ctl_table *ctl_table_arg;
-	struct ctl_table_root *root;
-	struct ctl_table_set *set;
-	struct ctl_dir *parent;
-	struct ctl_node *node;
-};
-
-struct ctl_dir {
-	/* Header must be at the start of ctl_dir */
-	struct ctl_table_header header;
-	struct rb_root root;
-};
-
-struct ctl_table_set {
-	int (*is_seen)(struct ctl_table_set *);
-	struct ctl_dir dir;
-};
-
-struct ctl_table_root {
-	struct ctl_table_set default_set;
-	struct ctl_table_set *(*lookup)(struct ctl_table_root *root,
-					   struct nsproxy *namespaces);
-	int (*permissions)(struct ctl_table_root *root,
-			struct nsproxy *namespaces, struct ctl_table *table);
-};
-
-/* struct ctl_path describes where in the hierarchy a table is added */
-struct ctl_path {
-	const char *procname;
-};
-
-#ifdef CONFIG_SYSCTL
-
-void proc_sys_poll_notify(struct ctl_table_poll *poll);
-
-extern void setup_sysctl_set(struct ctl_table_set *p,
-	struct ctl_table_root *root,
-	int (*is_seen)(struct ctl_table_set *));
-extern void retire_sysctl_set(struct ctl_table_set *set);
-
-void register_sysctl_root(struct ctl_table_root *root);
-struct ctl_table_header *__register_sysctl_table(
-	struct ctl_table_set *set,
-	const char *path, struct ctl_table *table);
-struct ctl_table_header *__register_sysctl_paths(
-	struct ctl_table_set *set,
-	const struct ctl_path *path, struct ctl_table *table);
-struct ctl_table_header *register_sysctl(const char *path, struct ctl_table *table);
-struct ctl_table_header *register_sysctl_table(struct ctl_table * table);
-struct ctl_table_header *register_sysctl_paths(const struct ctl_path *path,
-						struct ctl_table *table);
-
-void unregister_sysctl_table(struct ctl_table_header * table);
-
-extern int sysctl_init(void);
-#else /* CONFIG_SYSCTL */
-static inline struct ctl_table_header *register_sysctl_table(struct ctl_table * table)
-{
-	return NULL;
-}
-
-static inline struct ctl_table_header *register_sysctl_paths(
-			const struct ctl_path *path, struct ctl_table *table)
-{
-	return NULL;
-}
-
-static inline void unregister_sysctl_table(struct ctl_table_header * table)
-{
-}
-
-static inline void setup_sysctl_set(struct ctl_table_set *p,
-	struct ctl_table_root *root,
-	int (*is_seen)(struct ctl_table_set *))
-{
-}
-
-#endif /* CONFIG_SYSCTL */
-
-#endif /* __KERNEL__ */
-
-#endif /* _LINUX_SYSCTL_H */
diff --git a/ANDROID_3.4.5/include/linux/sysfs.h b/ANDROID_3.4.5/include/linux/sysfs.h
deleted file mode 100644
index 0010009b..00000000
--- a/ANDROID_3.4.5/include/linux/sysfs.h
+++ /dev/null
@@ -1,346 +0,0 @@
-/*
- * sysfs.h - definitions for the device driver filesystem
- *
- * Copyright (c) 2001,2002 Patrick Mochel
- * Copyright (c) 2004 Silicon Graphics, Inc.
- * Copyright (c) 2007 SUSE Linux Products GmbH
- * Copyright (c) 2007 Tejun Heo <teheo@suse.de>
- *
- * Please see Documentation/filesystems/sysfs.txt for more information.
- */
-
-#ifndef _SYSFS_H_
-#define _SYSFS_H_
-
-#include <linux/compiler.h>
-#include <linux/errno.h>
-#include <linux/list.h>
-#include <linux/lockdep.h>
-#include <linux/kobject_ns.h>
-#include <linux/atomic.h>
-
-struct kobject;
-struct module;
-enum kobj_ns_type;
-
-struct attribute {
-	const char		*name;
-	umode_t			mode;
-#ifdef CONFIG_DEBUG_LOCK_ALLOC
-	struct lock_class_key	*key;
-	struct lock_class_key	skey;
-#endif
-};
-
-/**
- *	sysfs_attr_init - initialize a dynamically allocated sysfs attribute
- *	@attr: struct attribute to initialize
- *
- *	Initialize a dynamically allocated struct attribute so we can
- *	make lockdep happy.  This is a new requirement for attributes
- *	and initially this is only needed when lockdep is enabled.
- *	Lockdep gives a nice error when your attribute is added to
- *	sysfs if you don't have this.
- */
-#ifdef CONFIG_DEBUG_LOCK_ALLOC
-#define sysfs_attr_init(attr)				\
-do {							\
-	static struct lock_class_key __key;		\
-							\
-	(attr)->key = &__key;				\
-} while(0)
-#else
-#define sysfs_attr_init(attr) do {} while(0)
-#endif
-
-struct attribute_group {
-	const char		*name;
-	umode_t			(*is_visible)(struct kobject *,
-					      struct attribute *, int);
-	struct attribute	**attrs;
-};
-
-
-
-/**
- * Use these macros to make defining attributes easier. See include/linux/device.h
- * for examples..
- */
-
-#define __ATTR(_name,_mode,_show,_store) { \
-	.attr = {.name = __stringify(_name), .mode = _mode },	\
-	.show	= _show,					\
-	.store	= _store,					\
-}
-
-#define __ATTR_RO(_name) { \
-	.attr	= { .name = __stringify(_name), .mode = 0444 },	\
-	.show	= _name##_show,					\
-}
-
-#define __ATTR_NULL { .attr = { .name = NULL } }
-
-#define attr_name(_attr) (_attr).attr.name
-
-struct file;
-struct vm_area_struct;
-
-struct bin_attribute {
-	struct attribute	attr;
-	size_t			size;
-	void			*private;
-	ssize_t (*read)(struct file *, struct kobject *, struct bin_attribute *,
-			char *, loff_t, size_t);
-	ssize_t (*write)(struct file *,struct kobject *, struct bin_attribute *,
-			 char *, loff_t, size_t);
-	int (*mmap)(struct file *, struct kobject *, struct bin_attribute *attr,
-		    struct vm_area_struct *vma);
-};
-
-/**
- *	sysfs_bin_attr_init - initialize a dynamically allocated bin_attribute
- *	@attr: struct bin_attribute to initialize
- *
- *	Initialize a dynamically allocated struct bin_attribute so we
- *	can make lockdep happy.  This is a new requirement for
- *	attributes and initially this is only needed when lockdep is
- *	enabled.  Lockdep gives a nice error when your attribute is
- *	added to sysfs if you don't have this.
- */
-#define sysfs_bin_attr_init(bin_attr) sysfs_attr_init(&(bin_attr)->attr)
-
-struct sysfs_ops {
-	ssize_t	(*show)(struct kobject *, struct attribute *,char *);
-	ssize_t	(*store)(struct kobject *,struct attribute *,const char *, size_t);
-	const void *(*namespace)(struct kobject *, const struct attribute *);
-};
-
-struct sysfs_dirent;
-
-#ifdef CONFIG_SYSFS
-
-int sysfs_schedule_callback(struct kobject *kobj, void (*func)(void *),
-			    void *data, struct module *owner);
-
-int __must_check sysfs_create_dir(struct kobject *kobj);
-void sysfs_remove_dir(struct kobject *kobj);
-int __must_check sysfs_rename_dir(struct kobject *kobj, const char *new_name);
-int __must_check sysfs_move_dir(struct kobject *kobj,
-				struct kobject *new_parent_kobj);
-
-int __must_check sysfs_create_file(struct kobject *kobj,
-				   const struct attribute *attr);
-int __must_check sysfs_create_files(struct kobject *kobj,
-				   const struct attribute **attr);
-int __must_check sysfs_chmod_file(struct kobject *kobj,
-				  const struct attribute *attr, umode_t mode);
-void sysfs_remove_file(struct kobject *kobj, const struct attribute *attr);
-void sysfs_remove_files(struct kobject *kobj, const struct attribute **attr);
-
-int __must_check sysfs_create_bin_file(struct kobject *kobj,
-				       const struct bin_attribute *attr);
-void sysfs_remove_bin_file(struct kobject *kobj,
-			   const struct bin_attribute *attr);
-
-int __must_check sysfs_create_link(struct kobject *kobj, struct kobject *target,
-				   const char *name);
-int __must_check sysfs_create_link_nowarn(struct kobject *kobj,
-					  struct kobject *target,
-					  const char *name);
-void sysfs_remove_link(struct kobject *kobj, const char *name);
-
-int sysfs_rename_link(struct kobject *kobj, struct kobject *target,
-			const char *old_name, const char *new_name);
-
-void sysfs_delete_link(struct kobject *dir, struct kobject *targ,
-			const char *name);
-
-int __must_check sysfs_create_group(struct kobject *kobj,
-				    const struct attribute_group *grp);
-int sysfs_update_group(struct kobject *kobj,
-		       const struct attribute_group *grp);
-void sysfs_remove_group(struct kobject *kobj,
-			const struct attribute_group *grp);
-int sysfs_add_file_to_group(struct kobject *kobj,
-			const struct attribute *attr, const char *group);
-void sysfs_remove_file_from_group(struct kobject *kobj,
-			const struct attribute *attr, const char *group);
-int sysfs_merge_group(struct kobject *kobj,
-		       const struct attribute_group *grp);
-void sysfs_unmerge_group(struct kobject *kobj,
-		       const struct attribute_group *grp);
-
-void sysfs_notify(struct kobject *kobj, const char *dir, const char *attr);
-void sysfs_notify_dirent(struct sysfs_dirent *sd);
-struct sysfs_dirent *sysfs_get_dirent(struct sysfs_dirent *parent_sd,
-				      const void *ns,
-				      const unsigned char *name);
-struct sysfs_dirent *sysfs_get(struct sysfs_dirent *sd);
-void sysfs_put(struct sysfs_dirent *sd);
-
-int __must_check sysfs_init(void);
-
-#else /* CONFIG_SYSFS */
-
-static inline int sysfs_schedule_callback(struct kobject *kobj,
-		void (*func)(void *), void *data, struct module *owner)
-{
-	return -ENOSYS;
-}
-
-static inline int sysfs_create_dir(struct kobject *kobj)
-{
-	return 0;
-}
-
-static inline void sysfs_remove_dir(struct kobject *kobj)
-{
-}
-
-static inline int sysfs_rename_dir(struct kobject *kobj, const char *new_name)
-{
-	return 0;
-}
-
-static inline int sysfs_move_dir(struct kobject *kobj,
-				 struct kobject *new_parent_kobj)
-{
-	return 0;
-}
-
-static inline int sysfs_create_file(struct kobject *kobj,
-				    const struct attribute *attr)
-{
-	return 0;
-}
-
-static inline int sysfs_create_files(struct kobject *kobj,
-				    const struct attribute **attr)
-{
-	return 0;
-}
-
-static inline int sysfs_chmod_file(struct kobject *kobj,
-				   const struct attribute *attr, umode_t mode)
-{
-	return 0;
-}
-
-static inline void sysfs_remove_file(struct kobject *kobj,
-				     const struct attribute *attr)
-{
-}
-
-static inline void sysfs_remove_files(struct kobject *kobj,
-				     const struct attribute **attr)
-{
-}
-
-static inline int sysfs_create_bin_file(struct kobject *kobj,
-					const struct bin_attribute *attr)
-{
-	return 0;
-}
-
-static inline void sysfs_remove_bin_file(struct kobject *kobj,
-					 const struct bin_attribute *attr)
-{
-}
-
-static inline int sysfs_create_link(struct kobject *kobj,
-				    struct kobject *target, const char *name)
-{
-	return 0;
-}
-
-static inline int sysfs_create_link_nowarn(struct kobject *kobj,
-					   struct kobject *target,
-					   const char *name)
-{
-	return 0;
-}
-
-static inline void sysfs_remove_link(struct kobject *kobj, const char *name)
-{
-}
-
-static inline int sysfs_rename_link(struct kobject *k, struct kobject *t,
-				    const char *old_name, const char *new_name)
-{
-	return 0;
-}
-
-static inline void sysfs_delete_link(struct kobject *k, struct kobject *t,
-				     const char *name)
-{
-}
-
-static inline int sysfs_create_group(struct kobject *kobj,
-				     const struct attribute_group *grp)
-{
-	return 0;
-}
-
-static inline int sysfs_update_group(struct kobject *kobj,
-				const struct attribute_group *grp)
-{
-	return 0;
-}
-
-static inline void sysfs_remove_group(struct kobject *kobj,
-				      const struct attribute_group *grp)
-{
-}
-
-static inline int sysfs_add_file_to_group(struct kobject *kobj,
-		const struct attribute *attr, const char *group)
-{
-	return 0;
-}
-
-static inline void sysfs_remove_file_from_group(struct kobject *kobj,
-		const struct attribute *attr, const char *group)
-{
-}
-
-static inline int sysfs_merge_group(struct kobject *kobj,
-		       const struct attribute_group *grp)
-{
-	return 0;
-}
-
-static inline void sysfs_unmerge_group(struct kobject *kobj,
-		       const struct attribute_group *grp)
-{
-}
-
-static inline void sysfs_notify(struct kobject *kobj, const char *dir,
-				const char *attr)
-{
-}
-static inline void sysfs_notify_dirent(struct sysfs_dirent *sd)
-{
-}
-static inline
-struct sysfs_dirent *sysfs_get_dirent(struct sysfs_dirent *parent_sd,
-				      const void *ns,
-				      const unsigned char *name)
-{
-	return NULL;
-}
-static inline struct sysfs_dirent *sysfs_get(struct sysfs_dirent *sd)
-{
-	return NULL;
-}
-static inline void sysfs_put(struct sysfs_dirent *sd)
-{
-}
-
-static inline int __must_check sysfs_init(void)
-{
-	return 0;
-}
-
-#endif /* CONFIG_SYSFS */
-
-#endif /* _SYSFS_H_ */
diff --git a/ANDROID_3.4.5/include/linux/sysinfo.h b/ANDROID_3.4.5/include/linux/sysinfo.h
deleted file mode 100644
index 934335a2..00000000
--- a/ANDROID_3.4.5/include/linux/sysinfo.h
+++ /dev/null
@@ -1,24 +0,0 @@
-#ifndef _LINUX_SYSINFO_H
-#define _LINUX_SYSINFO_H
-
-#include <linux/types.h>
-
-#define SI_LOAD_SHIFT	16
-struct sysinfo {
-	__kernel_long_t uptime;		/* Seconds since boot */
-	__kernel_ulong_t loads[3];	/* 1, 5, and 15 minute load averages */
-	__kernel_ulong_t totalram;	/* Total usable main memory size */
-	__kernel_ulong_t freeram;	/* Available memory size */
-	__kernel_ulong_t sharedram;	/* Amount of shared memory */
-	__kernel_ulong_t bufferram;	/* Memory used by buffers */
-	__kernel_ulong_t totalswap;	/* Total swap space size */
-	__kernel_ulong_t freeswap;	/* swap space still available */
-	__u16 procs;		   	/* Number of current processes */
-	__u16 pad;		   	/* Explicit padding for m68k */
-	__kernel_ulong_t totalhigh;	/* Total high memory size */
-	__kernel_ulong_t freehigh;	/* Available high memory size */
-	__u32 mem_unit;			/* Memory unit size in bytes */
-	char _f[20-2*sizeof(__kernel_ulong_t)-sizeof(__u32)];	/* Padding: libc5 uses this.. */
-};
-
-#endif /* _LINUX_SYSINFO_H */
diff --git a/ANDROID_3.4.5/include/linux/syslog.h b/ANDROID_3.4.5/include/linux/syslog.h
deleted file mode 100644
index 38911391..00000000
--- a/ANDROID_3.4.5/include/linux/syslog.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/*  Syslog internals
- *
- *  Copyright 2010 Canonical, Ltd.
- *  Author: Kees Cook <kees.cook@canonical.com>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2, or (at your option)
- *  any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; see the file COPYING.  If not, write to
- *  the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef _LINUX_SYSLOG_H
-#define _LINUX_SYSLOG_H
-
-/* Close the log.  Currently a NOP. */
-#define SYSLOG_ACTION_CLOSE          0
-/* Open the log. Currently a NOP. */
-#define SYSLOG_ACTION_OPEN           1
-/* Read from the log. */
-#define SYSLOG_ACTION_READ           2
-/* Read all messages remaining in the ring buffer. */
-#define SYSLOG_ACTION_READ_ALL       3
-/* Read and clear all messages remaining in the ring buffer */
-#define SYSLOG_ACTION_READ_CLEAR     4
-/* Clear ring buffer. */
-#define SYSLOG_ACTION_CLEAR          5
-/* Disable printk's to console */
-#define SYSLOG_ACTION_CONSOLE_OFF    6
-/* Enable printk's to console */
-#define SYSLOG_ACTION_CONSOLE_ON     7
-/* Set level of messages printed to console */
-#define SYSLOG_ACTION_CONSOLE_LEVEL  8
-/* Return number of unread characters in the log buffer */
-#define SYSLOG_ACTION_SIZE_UNREAD    9
-/* Return size of the log buffer */
-#define SYSLOG_ACTION_SIZE_BUFFER   10
-
-#define SYSLOG_FROM_CALL 0
-#define SYSLOG_FROM_FILE 1
-
-int do_syslog(int type, char __user *buf, int count, bool from_file);
-
-#endif /* _LINUX_SYSLOG_H */
diff --git a/ANDROID_3.4.5/include/linux/sysrq.h b/ANDROID_3.4.5/include/linux/sysrq.h
deleted file mode 100644
index 7faf933c..00000000
--- a/ANDROID_3.4.5/include/linux/sysrq.h
+++ /dev/null
@@ -1,78 +0,0 @@
-/* -*- linux-c -*-
- *
- *	$Id: sysrq.h,v 1.3 1997/07/17 11:54:33 mj Exp $
- *
- *	Linux Magic System Request Key Hacks
- *
- *	(c) 1997 Martin Mares <mj@atrey.karlin.mff.cuni.cz>
- *
- *	(c) 2000 Crutcher Dunnavant <crutcher+kernel@datastacks.com>
- *	overhauled to use key registration
- *	based upon discusions in irc://irc.openprojects.net/#kernelnewbies
- */
-
-#ifndef _LINUX_SYSRQ_H
-#define _LINUX_SYSRQ_H
-
-#include <linux/errno.h>
-#include <linux/types.h>
-
-/* Enable/disable SYSRQ support by default (0==no, 1==yes). */
-#define SYSRQ_DEFAULT_ENABLE	1
-
-/* Possible values of bitmask for enabling sysrq functions */
-/* 0x0001 is reserved for enable everything */
-#define SYSRQ_ENABLE_LOG	0x0002
-#define SYSRQ_ENABLE_KEYBOARD	0x0004
-#define SYSRQ_ENABLE_DUMP	0x0008
-#define SYSRQ_ENABLE_SYNC	0x0010
-#define SYSRQ_ENABLE_REMOUNT	0x0020
-#define SYSRQ_ENABLE_SIGNAL	0x0040
-#define SYSRQ_ENABLE_BOOT	0x0080
-#define SYSRQ_ENABLE_RTNICE	0x0100
-
-struct sysrq_key_op {
-	void (*handler)(int);
-	char *help_msg;
-	char *action_msg;
-	int enable_mask;
-};
-
-#ifdef CONFIG_MAGIC_SYSRQ
-
-/* Generic SysRq interface -- you may call it from any device driver, supplying
- * ASCII code of the key, pointer to registers and kbd/tty structs (if they
- * are available -- else NULL's).
- */
-
-void handle_sysrq(int key);
-void __handle_sysrq(int key, bool check_mask);
-int register_sysrq_key(int key, struct sysrq_key_op *op);
-int unregister_sysrq_key(int key, struct sysrq_key_op *op);
-struct sysrq_key_op *__sysrq_get_key_op(int key);
-
-int sysrq_toggle_support(int enable_mask);
-
-#else
-
-static inline void handle_sysrq(int key)
-{
-}
-
-static inline void __handle_sysrq(int key, bool check_mask)
-{
-}
-
-static inline int register_sysrq_key(int key, struct sysrq_key_op *op)
-{
-	return -EINVAL;
-}
-
-static inline int unregister_sysrq_key(int key, struct sysrq_key_op *op)
-{
-	return -EINVAL;
-}
-
-#endif
-
-#endif /* _LINUX_SYSRQ_H */
diff --git a/ANDROID_3.4.5/include/linux/sysv_fs.h b/ANDROID_3.4.5/include/linux/sysv_fs.h
deleted file mode 100644
index e47d6d90..00000000
--- a/ANDROID_3.4.5/include/linux/sysv_fs.h
+++ /dev/null
@@ -1,213 +0,0 @@
-#ifndef _LINUX_SYSV_FS_H
-#define _LINUX_SYSV_FS_H
-
-#define __packed2__	__attribute__((packed, aligned(2)))
-
-
-#ifndef __KERNEL__
-typedef u16 __fs16;
-typedef u32 __fs16;
-#endif
-
-/* inode numbers are 16 bit */
-typedef __fs16 sysv_ino_t;
-
-/* Block numbers are 24 bit, sometimes stored in 32 bit.
-   On Coherent FS, they are always stored in PDP-11 manner: the least
-   significant 16 bits come last. */
-typedef __fs32 sysv_zone_t;
-
-/* 0 is non-existent */
-#define SYSV_BADBL_INO	1	/* inode of bad blocks file */
-#define SYSV_ROOT_INO	2	/* inode of root directory */
-
-
-/* Xenix super-block data on disk */
-#define XENIX_NICINOD	100	/* number of inode cache entries */
-#define XENIX_NICFREE	100	/* number of free block list chunk entries */
-struct xenix_super_block {
-	__fs16		s_isize; /* index of first data zone */
-	__fs32		s_fsize __packed2__; /* total number of zones of this fs */
-	/* the start of the free block list: */
-	__fs16		s_nfree;	/* number of free blocks in s_free, <= XENIX_NICFREE */
-	sysv_zone_t	s_free[XENIX_NICFREE]; /* first free block list chunk */
-	/* the cache of free inodes: */
-	__fs16		s_ninode; /* number of free inodes in s_inode, <= XENIX_NICINOD */
-	sysv_ino_t	s_inode[XENIX_NICINOD]; /* some free inodes */
-	/* locks, not used by Linux: */
-	char		s_flock;	/* lock during free block list manipulation */
-	char		s_ilock;	/* lock during inode cache manipulation */
-	char		s_fmod;		/* super-block modified flag */
-	char		s_ronly;	/* flag whether fs is mounted read-only */
-	__fs32		s_time __packed2__; /* time of last super block update */
-	__fs32		s_tfree __packed2__; /* total number of free zones */
-	__fs16		s_tinode;	/* total number of free inodes */
-	__fs16		s_dinfo[4];	/* device information ?? */
-	char		s_fname[6];	/* file system volume name */
-	char		s_fpack[6];	/* file system pack name */
-	char		s_clean;	/* set to 0x46 when filesystem is properly unmounted */
-	char		s_fill[371];
-	s32		s_magic;	/* version of file system */
-	__fs32		s_type;		/* type of file system: 1 for 512 byte blocks
-								2 for 1024 byte blocks
-								3 for 2048 byte blocks */
-								
-};
-
-/*
- * SystemV FS comes in two variants:
- * sysv2: System V Release 2 (e.g. Microport), structure elements aligned(2).
- * sysv4: System V Release 4 (e.g. Consensys), structure elements aligned(4).
- */
-#define SYSV_NICINOD	100	/* number of inode cache entries */
-#define SYSV_NICFREE	50	/* number of free block list chunk entries */
-
-/* SystemV4 super-block data on disk */
-struct sysv4_super_block {
-	__fs16	s_isize;	/* index of first data zone */
-	u16	s_pad0;
-	__fs32	s_fsize;	/* total number of zones of this fs */
-	/* the start of the free block list: */
-	__fs16	s_nfree;	/* number of free blocks in s_free, <= SYSV_NICFREE */
-	u16	s_pad1;
-	sysv_zone_t	s_free[SYSV_NICFREE]; /* first free block list chunk */
-	/* the cache of free inodes: */
-	__fs16	s_ninode;	/* number of free inodes in s_inode, <= SYSV_NICINOD */
-	u16	s_pad2;
-	sysv_ino_t     s_inode[SYSV_NICINOD]; /* some free inodes */
-	/* locks, not used by Linux: */
-	char	s_flock;	/* lock during free block list manipulation */
-	char	s_ilock;	/* lock during inode cache manipulation */
-	char	s_fmod;		/* super-block modified flag */
-	char	s_ronly;	/* flag whether fs is mounted read-only */
-	__fs32	s_time;		/* time of last super block update */
-	__fs16	s_dinfo[4];	/* device information ?? */
-	__fs32	s_tfree;	/* total number of free zones */
-	__fs16	s_tinode;	/* total number of free inodes */
-	u16	s_pad3;
-	char	s_fname[6];	/* file system volume name */
-	char	s_fpack[6];	/* file system pack name */
-	s32	s_fill[12];
-	__fs32	s_state;	/* file system state: 0x7c269d38-s_time means clean */
-	s32	s_magic;	/* version of file system */
-	__fs32	s_type;		/* type of file system: 1 for 512 byte blocks
-								2 for 1024 byte blocks */
-};
-
-/* SystemV2 super-block data on disk */
-struct sysv2_super_block {
-	__fs16	s_isize; 		/* index of first data zone */
-	__fs32	s_fsize __packed2__;	/* total number of zones of this fs */
-	/* the start of the free block list: */
-	__fs16	s_nfree;		/* number of free blocks in s_free, <= SYSV_NICFREE */
-	sysv_zone_t s_free[SYSV_NICFREE];	/* first free block list chunk */
-	/* the cache of free inodes: */
-	__fs16	s_ninode;		/* number of free inodes in s_inode, <= SYSV_NICINOD */
-	sysv_ino_t     s_inode[SYSV_NICINOD]; /* some free inodes */
-	/* locks, not used by Linux: */
-	char	s_flock;		/* lock during free block list manipulation */
-	char	s_ilock;		/* lock during inode cache manipulation */
-	char	s_fmod;			/* super-block modified flag */
-	char	s_ronly;		/* flag whether fs is mounted read-only */
-	__fs32	s_time __packed2__;	/* time of last super block update */
-	__fs16	s_dinfo[4];		/* device information ?? */
-	__fs32	s_tfree __packed2__;	/* total number of free zones */
-	__fs16	s_tinode;		/* total number of free inodes */
-	char	s_fname[6];		/* file system volume name */
-	char	s_fpack[6];		/* file system pack name */
-	s32	s_fill[14];
-	__fs32	s_state;		/* file system state: 0xcb096f43 means clean */
-	s32	s_magic;		/* version of file system */
-	__fs32	s_type;			/* type of file system: 1 for 512 byte blocks
-								2 for 1024 byte blocks */
-};
-
-/* V7 super-block data on disk */
-#define V7_NICINOD     100     /* number of inode cache entries */
-#define V7_NICFREE     50      /* number of free block list chunk entries */
-struct v7_super_block {
-	__fs16 s_isize;        /* index of first data zone */
-	__fs32 s_fsize __packed2__; /* total number of zones of this fs */
-	/* the start of the free block list: */
-	__fs16 s_nfree;        /* number of free blocks in s_free, <= V7_NICFREE */
-	sysv_zone_t s_free[V7_NICFREE]; /* first free block list chunk */
-	/* the cache of free inodes: */
-	__fs16 s_ninode;       /* number of free inodes in s_inode, <= V7_NICINOD */
-	sysv_ino_t      s_inode[V7_NICINOD]; /* some free inodes */
-	/* locks, not used by Linux or V7: */
-	char    s_flock;        /* lock during free block list manipulation */
-	char    s_ilock;        /* lock during inode cache manipulation */
-	char    s_fmod;         /* super-block modified flag */
-	char    s_ronly;        /* flag whether fs is mounted read-only */
-	__fs32  s_time __packed2__; /* time of last super block update */
-	/* the following fields are not maintained by V7: */
-	__fs32  s_tfree __packed2__; /* total number of free zones */
-	__fs16  s_tinode;       /* total number of free inodes */
-	__fs16  s_m;            /* interleave factor */
-	__fs16  s_n;            /* interleave factor */
-	char    s_fname[6];     /* file system name */
-	char    s_fpack[6];     /* file system pack name */
-};
-/* Constants to aid sanity checking */
-/* This is not a hard limit, nor enforced by v7 kernel. It's actually just
- * the limit used by Seventh Edition's ls, though is high enough to assume
- * that no reasonable file system would have that much entries in root
- * directory. Thus, if we see anything higher, we just probably got the
- * endiannes wrong. */
-#define V7_NFILES	1024
-/* The disk addresses are three-byte (despite direct block addresses being
- * aligned word-wise in inode). If the most significant byte is non-zero,
- * something is most likely wrong (not a filesystem, bad bytesex). */
-#define V7_MAXSIZE	0x00ffffff
-
-/* Coherent super-block data on disk */
-#define COH_NICINOD	100	/* number of inode cache entries */
-#define COH_NICFREE	64	/* number of free block list chunk entries */
-struct coh_super_block {
-	__fs16		s_isize;	/* index of first data zone */
-	__fs32		s_fsize __packed2__; /* total number of zones of this fs */
-	/* the start of the free block list: */
-	__fs16 s_nfree;	/* number of free blocks in s_free, <= COH_NICFREE */
-	sysv_zone_t	s_free[COH_NICFREE] __packed2__; /* first free block list chunk */
-	/* the cache of free inodes: */
-	__fs16		s_ninode;	/* number of free inodes in s_inode, <= COH_NICINOD */
-	sysv_ino_t	s_inode[COH_NICINOD]; /* some free inodes */
-	/* locks, not used by Linux: */
-	char		s_flock;	/* lock during free block list manipulation */
-	char		s_ilock;	/* lock during inode cache manipulation */
-	char		s_fmod;		/* super-block modified flag */
-	char		s_ronly;	/* flag whether fs is mounted read-only */
-	__fs32		s_time __packed2__; /* time of last super block update */
-	__fs32		s_tfree __packed2__; /* total number of free zones */
-	__fs16		s_tinode;	/* total number of free inodes */
-	__fs16		s_interleave_m;	/* interleave factor */
-	__fs16		s_interleave_n;
-	char		s_fname[6];	/* file system volume name */
-	char		s_fpack[6];	/* file system pack name */
-	__fs32		s_unique;	/* zero, not used */
-};
-
-/* SystemV/Coherent inode data on disk */
-struct sysv_inode {
-	__fs16 i_mode;
-	__fs16 i_nlink;
-	__fs16 i_uid;
-	__fs16 i_gid;
-	__fs32 i_size;
-	u8  i_data[3*(10+1+1+1)];
-	u8  i_gen;
-	__fs32 i_atime;	/* time of last access */
-	__fs32 i_mtime;	/* time of last modification */
-	__fs32 i_ctime;	/* time of creation */
-};
-
-/* SystemV/Coherent directory entry on disk */
-#define SYSV_NAMELEN	14	/* max size of name in struct sysv_dir_entry */
-struct sysv_dir_entry {
-	sysv_ino_t inode;
-	char name[SYSV_NAMELEN]; /* up to 14 characters, the rest are zeroes */
-};
-
-#define SYSV_DIRSIZE	sizeof(struct sysv_dir_entry)	/* size of every directory entry */
-
-#endif /* _LINUX_SYSV_FS_H */
diff --git a/ANDROID_3.4.5/include/linux/task_io_accounting.h b/ANDROID_3.4.5/include/linux/task_io_accounting.h
deleted file mode 100644
index bdf855c2..00000000
--- a/ANDROID_3.4.5/include/linux/task_io_accounting.h
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- * task_io_accounting: a structure which is used for recording a single task's
- * IO statistics.
- *
- * Don't include this header file directly - it is designed to be dragged in via
- * sched.h.
- *
- * Blame Andrew Morton for all this.
- */
-
-struct task_io_accounting {
-#ifdef CONFIG_TASK_XACCT
-	/* bytes read */
-	u64 rchar;
-	/*  bytes written */
-	u64 wchar;
-	/* # of read syscalls */
-	u64 syscr;
-	/* # of write syscalls */
-	u64 syscw;
-#endif /* CONFIG_TASK_XACCT */
-
-#ifdef CONFIG_TASK_IO_ACCOUNTING
-	/*
-	 * The number of bytes which this task has caused to be read from
-	 * storage.
-	 */
-	u64 read_bytes;
-
-	/*
-	 * The number of bytes which this task has caused, or shall cause to be
-	 * written to disk.
-	 */
-	u64 write_bytes;
-
-	/*
-	 * A task can cause "negative" IO too.  If this task truncates some
-	 * dirty pagecache, some IO which another task has been accounted for
-	 * (in its write_bytes) will not be happening.  We _could_ just
-	 * subtract that from the truncating task's write_bytes, but there is
-	 * information loss in doing that.
-	 */
-	u64 cancelled_write_bytes;
-#endif /* CONFIG_TASK_IO_ACCOUNTING */
-};
diff --git a/ANDROID_3.4.5/include/linux/task_io_accounting_ops.h b/ANDROID_3.4.5/include/linux/task_io_accounting_ops.h
deleted file mode 100644
index 4d090f9e..00000000
--- a/ANDROID_3.4.5/include/linux/task_io_accounting_ops.h
+++ /dev/null
@@ -1,113 +0,0 @@
-/*
- * Task I/O accounting operations
- */
-#ifndef __TASK_IO_ACCOUNTING_OPS_INCLUDED
-#define __TASK_IO_ACCOUNTING_OPS_INCLUDED
-
-#include <linux/sched.h>
-
-#ifdef CONFIG_TASK_IO_ACCOUNTING
-static inline void task_io_account_read(size_t bytes)
-{
-	current->ioac.read_bytes += bytes;
-}
-
-/*
- * We approximate number of blocks, because we account bytes only.
- * A 'block' is 512 bytes
- */
-static inline unsigned long task_io_get_inblock(const struct task_struct *p)
-{
-	return p->ioac.read_bytes >> 9;
-}
-
-static inline void task_io_account_write(size_t bytes)
-{
-	current->ioac.write_bytes += bytes;
-}
-
-/*
- * We approximate number of blocks, because we account bytes only.
- * A 'block' is 512 bytes
- */
-static inline unsigned long task_io_get_oublock(const struct task_struct *p)
-{
-	return p->ioac.write_bytes >> 9;
-}
-
-static inline void task_io_account_cancelled_write(size_t bytes)
-{
-	current->ioac.cancelled_write_bytes += bytes;
-}
-
-static inline void task_io_accounting_init(struct task_io_accounting *ioac)
-{
-	memset(ioac, 0, sizeof(*ioac));
-}
-
-static inline void task_blk_io_accounting_add(struct task_io_accounting *dst,
-						struct task_io_accounting *src)
-{
-	dst->read_bytes += src->read_bytes;
-	dst->write_bytes += src->write_bytes;
-	dst->cancelled_write_bytes += src->cancelled_write_bytes;
-}
-
-#else
-
-static inline void task_io_account_read(size_t bytes)
-{
-}
-
-static inline unsigned long task_io_get_inblock(const struct task_struct *p)
-{
-	return 0;
-}
-
-static inline void task_io_account_write(size_t bytes)
-{
-}
-
-static inline unsigned long task_io_get_oublock(const struct task_struct *p)
-{
-	return 0;
-}
-
-static inline void task_io_account_cancelled_write(size_t bytes)
-{
-}
-
-static inline void task_io_accounting_init(struct task_io_accounting *ioac)
-{
-}
-
-static inline void task_blk_io_accounting_add(struct task_io_accounting *dst,
-						struct task_io_accounting *src)
-{
-}
-
-#endif /* CONFIG_TASK_IO_ACCOUNTING */
-
-#ifdef CONFIG_TASK_XACCT
-static inline void task_chr_io_accounting_add(struct task_io_accounting *dst,
-						struct task_io_accounting *src)
-{
-	dst->rchar += src->rchar;
-	dst->wchar += src->wchar;
-	dst->syscr += src->syscr;
-	dst->syscw += src->syscw;
-}
-#else
-static inline void task_chr_io_accounting_add(struct task_io_accounting *dst,
-						struct task_io_accounting *src)
-{
-}
-#endif /* CONFIG_TASK_XACCT */
-
-static inline void task_io_accounting_add(struct task_io_accounting *dst,
-						struct task_io_accounting *src)
-{
-	task_chr_io_accounting_add(dst, src);
-	task_blk_io_accounting_add(dst, src);
-}
-#endif /* __TASK_IO_ACCOUNTING_OPS_INCLUDED */
diff --git a/ANDROID_3.4.5/include/linux/taskstats.h b/ANDROID_3.4.5/include/linux/taskstats.h
deleted file mode 100644
index 2466e550..00000000
--- a/ANDROID_3.4.5/include/linux/taskstats.h
+++ /dev/null
@@ -1,213 +0,0 @@
-/* taskstats.h - exporting per-task statistics
- *
- * Copyright (C) Shailabh Nagar, IBM Corp. 2006
- *           (C) Balbir Singh,   IBM Corp. 2006
- *           (C) Jay Lan,        SGI, 2006
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of version 2.1 of the GNU Lesser General Public License
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it would be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-#ifndef _LINUX_TASKSTATS_H
-#define _LINUX_TASKSTATS_H
-
-#include <linux/types.h>
-
-/* Format for per-task data returned to userland when
- *	- a task exits
- *	- listener requests stats for a task
- *
- * The struct is versioned. Newer versions should only add fields to
- * the bottom of the struct to maintain backward compatibility.
- *
- *
- * To add new fields
- *	a) bump up TASKSTATS_VERSION
- *	b) add comment indicating new version number at end of struct
- *	c) add new fields after version comment; maintain 64-bit alignment
- */
-
-
-#define TASKSTATS_VERSION	8
-#define TS_COMM_LEN		32	/* should be >= TASK_COMM_LEN
-					 * in linux/sched.h */
-
-struct taskstats {
-
-	/* The version number of this struct. This field is always set to
-	 * TAKSTATS_VERSION, which is defined in <linux/taskstats.h>.
-	 * Each time the struct is changed, the value should be incremented.
-	 */
-	__u16	version;
-	__u32	ac_exitcode;		/* Exit status */
-
-	/* The accounting flags of a task as defined in <linux/acct.h>
-	 * Defined values are AFORK, ASU, ACOMPAT, ACORE, and AXSIG.
-	 */
-	__u8	ac_flag;		/* Record flags */
-	__u8	ac_nice;		/* task_nice */
-
-	/* Delay accounting fields start
-	 *
-	 * All values, until comment "Delay accounting fields end" are
-	 * available only if delay accounting is enabled, even though the last
-	 * few fields are not delays
-	 *
-	 * xxx_count is the number of delay values recorded
-	 * xxx_delay_total is the corresponding cumulative delay in nanoseconds
-	 *
-	 * xxx_delay_total wraps around to zero on overflow
-	 * xxx_count incremented regardless of overflow
-	 */
-
-	/* Delay waiting for cpu, while runnable
-	 * count, delay_total NOT updated atomically
-	 */
-	__u64	cpu_count __attribute__((aligned(8)));
-	__u64	cpu_delay_total;
-
-	/* Following four fields atomically updated using task->delays->lock */
-
-	/* Delay waiting for synchronous block I/O to complete
-	 * does not account for delays in I/O submission
-	 */
-	__u64	blkio_count;
-	__u64	blkio_delay_total;
-
-	/* Delay waiting for page fault I/O (swap in only) */
-	__u64	swapin_count;
-	__u64	swapin_delay_total;
-
-	/* cpu "wall-clock" running time
-	 * On some architectures, value will adjust for cpu time stolen
-	 * from the kernel in involuntary waits due to virtualization.
-	 * Value is cumulative, in nanoseconds, without a corresponding count
-	 * and wraps around to zero silently on overflow
-	 */
-	__u64	cpu_run_real_total;
-
-	/* cpu "virtual" running time
-	 * Uses time intervals seen by the kernel i.e. no adjustment
-	 * for kernel's involuntary waits due to virtualization.
-	 * Value is cumulative, in nanoseconds, without a corresponding count
-	 * and wraps around to zero silently on overflow
-	 */
-	__u64	cpu_run_virtual_total;
-	/* Delay accounting fields end */
-	/* version 1 ends here */
-
-	/* Basic Accounting Fields start */
-	char	ac_comm[TS_COMM_LEN];	/* Command name */
-	__u8	ac_sched __attribute__((aligned(8)));
-					/* Scheduling discipline */
-	__u8	ac_pad[3];
-	__u32	ac_uid __attribute__((aligned(8)));
-					/* User ID */
-	__u32	ac_gid;			/* Group ID */
-	__u32	ac_pid;			/* Process ID */
-	__u32	ac_ppid;		/* Parent process ID */
-	__u32	ac_btime;		/* Begin time [sec since 1970] */
-	__u64	ac_etime __attribute__((aligned(8)));
-					/* Elapsed time [usec] */
-	__u64	ac_utime;		/* User CPU time [usec] */
-	__u64	ac_stime;		/* SYstem CPU time [usec] */
-	__u64	ac_minflt;		/* Minor Page Fault Count */
-	__u64	ac_majflt;		/* Major Page Fault Count */
-	/* Basic Accounting Fields end */
-
-	/* Extended accounting fields start */
-	/* Accumulated RSS usage in duration of a task, in MBytes-usecs.
-	 * The current rss usage is added to this counter every time
-	 * a tick is charged to a task's system time. So, at the end we
-	 * will have memory usage multiplied by system time. Thus an
-	 * average usage per system time unit can be calculated.
-	 */
-	__u64	coremem;		/* accumulated RSS usage in MB-usec */
-	/* Accumulated virtual memory usage in duration of a task.
-	 * Same as acct_rss_mem1 above except that we keep track of VM usage.
-	 */
-	__u64	virtmem;		/* accumulated VM  usage in MB-usec */
-
-	/* High watermark of RSS and virtual memory usage in duration of
-	 * a task, in KBytes.
-	 */
-	__u64	hiwater_rss;		/* High-watermark of RSS usage, in KB */
-	__u64	hiwater_vm;		/* High-water VM usage, in KB */
-
-	/* The following four fields are I/O statistics of a task. */
-	__u64	read_char;		/* bytes read */
-	__u64	write_char;		/* bytes written */
-	__u64	read_syscalls;		/* read syscalls */
-	__u64	write_syscalls;		/* write syscalls */
-	/* Extended accounting fields end */
-
-#define TASKSTATS_HAS_IO_ACCOUNTING
-	/* Per-task storage I/O accounting starts */
-	__u64	read_bytes;		/* bytes of read I/O */
-	__u64	write_bytes;		/* bytes of write I/O */
-	__u64	cancelled_write_bytes;	/* bytes of cancelled write I/O */
-
-	__u64  nvcsw;			/* voluntary_ctxt_switches */
-	__u64  nivcsw;			/* nonvoluntary_ctxt_switches */
-
-	/* time accounting for SMT machines */
-	__u64	ac_utimescaled;		/* utime scaled on frequency etc */
-	__u64	ac_stimescaled;		/* stime scaled on frequency etc */
-	__u64	cpu_scaled_run_real_total; /* scaled cpu_run_real_total */
-
-	/* Delay waiting for memory reclaim */
-	__u64	freepages_count;
-	__u64	freepages_delay_total;
-};
-
-
-/*
- * Commands sent from userspace
- * Not versioned. New commands should only be inserted at the enum's end
- * prior to __TASKSTATS_CMD_MAX
- */
-
-enum {
-	TASKSTATS_CMD_UNSPEC = 0,	/* Reserved */
-	TASKSTATS_CMD_GET,		/* user->kernel request/get-response */
-	TASKSTATS_CMD_NEW,		/* kernel->user event */
-	__TASKSTATS_CMD_MAX,
-};
-
-#define TASKSTATS_CMD_MAX (__TASKSTATS_CMD_MAX - 1)
-
-enum {
-	TASKSTATS_TYPE_UNSPEC = 0,	/* Reserved */
-	TASKSTATS_TYPE_PID,		/* Process id */
-	TASKSTATS_TYPE_TGID,		/* Thread group id */
-	TASKSTATS_TYPE_STATS,		/* taskstats structure */
-	TASKSTATS_TYPE_AGGR_PID,	/* contains pid + stats */
-	TASKSTATS_TYPE_AGGR_TGID,	/* contains tgid + stats */
-	TASKSTATS_TYPE_NULL,		/* contains nothing */
-	__TASKSTATS_TYPE_MAX,
-};
-
-#define TASKSTATS_TYPE_MAX (__TASKSTATS_TYPE_MAX - 1)
-
-enum {
-	TASKSTATS_CMD_ATTR_UNSPEC = 0,
-	TASKSTATS_CMD_ATTR_PID,
-	TASKSTATS_CMD_ATTR_TGID,
-	TASKSTATS_CMD_ATTR_REGISTER_CPUMASK,
-	TASKSTATS_CMD_ATTR_DEREGISTER_CPUMASK,
-	__TASKSTATS_CMD_ATTR_MAX,
-};
-
-#define TASKSTATS_CMD_ATTR_MAX (__TASKSTATS_CMD_ATTR_MAX - 1)
-
-/* NETLINK_GENERIC related info */
-
-#define TASKSTATS_GENL_NAME	"TASKSTATS"
-#define TASKSTATS_GENL_VERSION	0x1
-
-#endif /* _LINUX_TASKSTATS_H */
diff --git a/ANDROID_3.4.5/include/linux/taskstats_kern.h b/ANDROID_3.4.5/include/linux/taskstats_kern.h
deleted file mode 100644
index 58de6edf..00000000
--- a/ANDROID_3.4.5/include/linux/taskstats_kern.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/* taskstats_kern.h - kernel header for per-task statistics interface
- *
- * Copyright (C) Shailabh Nagar, IBM Corp. 2006
- *           (C) Balbir Singh,   IBM Corp. 2006
- */
-
-#ifndef _LINUX_TASKSTATS_KERN_H
-#define _LINUX_TASKSTATS_KERN_H
-
-#include <linux/taskstats.h>
-#include <linux/sched.h>
-#include <linux/slab.h>
-
-#ifdef CONFIG_TASKSTATS
-extern struct kmem_cache *taskstats_cache;
-extern struct mutex taskstats_exit_mutex;
-
-static inline void taskstats_tgid_free(struct signal_struct *sig)
-{
-	if (sig->stats)
-		kmem_cache_free(taskstats_cache, sig->stats);
-}
-
-extern void taskstats_exit(struct task_struct *, int group_dead);
-extern void taskstats_init_early(void);
-#else
-static inline void taskstats_exit(struct task_struct *tsk, int group_dead)
-{}
-static inline void taskstats_tgid_free(struct signal_struct *sig)
-{}
-static inline void taskstats_init_early(void)
-{}
-#endif /* CONFIG_TASKSTATS */
-
-#endif
-
diff --git a/ANDROID_3.4.5/include/linux/tboot.h b/ANDROID_3.4.5/include/linux/tboot.h
deleted file mode 100644
index c75128be..00000000
--- a/ANDROID_3.4.5/include/linux/tboot.h
+++ /dev/null
@@ -1,162 +0,0 @@
-/*
- * tboot.h: shared data structure with tboot and kernel and functions
- *          used by kernel for runtime support of Intel(R) Trusted
- *          Execution Technology
- *
- * Copyright (c) 2006-2009, Intel Corporation
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- *
- */
-
-#ifndef _LINUX_TBOOT_H
-#define _LINUX_TBOOT_H
-
-/* these must have the values from 0-5 in this order */
-enum {
-	TB_SHUTDOWN_REBOOT = 0,
-	TB_SHUTDOWN_S5,
-	TB_SHUTDOWN_S4,
-	TB_SHUTDOWN_S3,
-	TB_SHUTDOWN_HALT,
-	TB_SHUTDOWN_WFS
-};
-
-#ifdef CONFIG_INTEL_TXT
-#include <acpi/acpi.h>
-/* used to communicate between tboot and the launched kernel */
-
-#define TB_KEY_SIZE             64   /* 512 bits */
-
-#define MAX_TB_MAC_REGIONS      32
-
-struct tboot_mac_region {
-	u64  start;         /* must be 64 byte -aligned */
-	u32  size;          /* must be 64 byte -granular */
-} __packed;
-
-/* GAS - Generic Address Structure (ACPI 2.0+) */
-struct tboot_acpi_generic_address {
-	u8  space_id;
-	u8  bit_width;
-	u8  bit_offset;
-	u8  access_width;
-	u64 address;
-} __packed;
-
-/*
- * combines Sx info from FADT and FACS tables per ACPI 2.0+ spec
- * (http://www.acpi.info/)
- */
-struct tboot_acpi_sleep_info {
-	struct tboot_acpi_generic_address pm1a_cnt_blk;
-	struct tboot_acpi_generic_address pm1b_cnt_blk;
-	struct tboot_acpi_generic_address pm1a_evt_blk;
-	struct tboot_acpi_generic_address pm1b_evt_blk;
-	u16 pm1a_cnt_val;
-	u16 pm1b_cnt_val;
-	u64 wakeup_vector;
-	u32 vector_width;
-	u64 kernel_s3_resume_vector;
-} __packed;
-
-/*
- * shared memory page used for communication between tboot and kernel
- */
-struct tboot {
-	/*
-	 * version 3+ fields:
-	 */
-
-	/* TBOOT_UUID */
-	u8 uuid[16];
-
-	/* version number: 5 is current */
-	u32 version;
-
-	/* physical addr of tb_log_t log */
-	u32 log_addr;
-
-	/*
-	 * physical addr of entry point for tboot shutdown and
-	 * type of shutdown (TB_SHUTDOWN_*) being requested
-	 */
-	u32 shutdown_entry;
-	u32 shutdown_type;
-
-	/* kernel-specified ACPI info for Sx shutdown */
-	struct tboot_acpi_sleep_info acpi_sinfo;
-
-	/* tboot location in memory (physical) */
-	u32 tboot_base;
-	u32 tboot_size;
-
-	/* memory regions (phys addrs) for tboot to MAC on S3 */
-	u8 num_mac_regions;
-	struct tboot_mac_region mac_regions[MAX_TB_MAC_REGIONS];
-
-
-	/*
-	 * version 4+ fields:
-	 */
-
-	/* symmetric key for use by kernel; will be encrypted on S3 */
-	u8 s3_key[TB_KEY_SIZE];
-
-
-	/*
-	 * version 5+ fields:
-	 */
-
-	/* used to 4byte-align num_in_wfs */
-	u8 reserved_align[3];
-
-	/* number of processors in wait-for-SIPI */
-	u32 num_in_wfs;
-} __packed;
-
-/*
- * UUID for tboot data struct to facilitate matching
- * defined as {663C8DFF-E8B3-4b82-AABF-19EA4D057A08} by tboot, which is
- * represented as {} in the char array used here
- */
-#define TBOOT_UUID	{0xff, 0x8d, 0x3c, 0x66, 0xb3, 0xe8, 0x82, 0x4b, 0xbf,\
-			 0xaa, 0x19, 0xea, 0x4d, 0x5, 0x7a, 0x8}
-
-extern struct tboot *tboot;
-
-static inline int tboot_enabled(void)
-{
-	return tboot != NULL;
-}
-
-extern void tboot_probe(void);
-extern void tboot_shutdown(u32 shutdown_type);
-extern struct acpi_table_header *tboot_get_dmar_table(
-				      struct acpi_table_header *dmar_tbl);
-extern int tboot_force_iommu(void);
-
-#else
-
-#define tboot_enabled()			0
-#define tboot_probe()			do { } while (0)
-#define tboot_shutdown(shutdown_type)	do { } while (0)
-#define tboot_sleep(sleep_state, pm1a_control, pm1b_control)	\
-					do { } while (0)
-#define tboot_get_dmar_table(dmar_tbl)	(dmar_tbl)
-#define tboot_force_iommu()		0
-
-#endif /* !CONFIG_INTEL_TXT */
-
-#endif /* _LINUX_TBOOT_H */
diff --git a/ANDROID_3.4.5/include/linux/tc.h b/ANDROID_3.4.5/include/linux/tc.h
deleted file mode 100644
index f92511e5..00000000
--- a/ANDROID_3.4.5/include/linux/tc.h
+++ /dev/null
@@ -1,141 +0,0 @@
-/*
- *	Interface to the TURBOchannel related routines.
- *
- *	Copyright (c) 1998  Harald Koerfgen
- *	Copyright (c) 2005  James Simmons
- *	Copyright (c) 2006  Maciej W. Rozycki
- *
- *	Based on:
- *
- *	"TURBOchannel Firmware Specification", EK-TCAAD-FS-004
- *
- *	from Digital Equipment Corporation.
- *
- *	This file is subject to the terms and conditions of the GNU
- *	General Public License.  See the file "COPYING" in the main
- *	directory of this archive for more details.
- */
-#ifndef _LINUX_TC_H
-#define _LINUX_TC_H
-
-#include <linux/compiler.h>
-#include <linux/device.h>
-#include <linux/ioport.h>
-#include <linux/types.h>
-
-/*
- * Offsets for the ROM header locations for TURBOchannel cards.
- */
-#define TC_OLDCARD	0x3c0000
-#define TC_NEWCARD	0x000000
-
-#define TC_ROM_WIDTH	0x3e0
-#define TC_ROM_STRIDE	0x3e4
-#define TC_ROM_SIZE	0x3e8
-#define TC_SLOT_SIZE	0x3ec
-#define TC_PATTERN0	0x3f0
-#define TC_PATTERN1	0x3f4
-#define TC_PATTERN2	0x3f8
-#define TC_PATTERN3	0x3fc
-#define TC_FIRM_VER	0x400
-#define TC_VENDOR	0x420
-#define TC_MODULE	0x440
-#define TC_FIRM_TYPE	0x460
-#define TC_FLAGS	0x470
-#define TC_ROM_OBJECTS	0x480
-
-/*
- * Information obtained through the get_tcinfo() PROM call.
- */
-struct tcinfo {
-	s32		revision;	/* Hardware revision level. */
-	s32		clk_period;	/* Clock period in nanoseconds. */
-	s32		slot_size;	/* Slot size in megabytes. */
-	s32		io_timeout;	/* I/O timeout in cycles. */
-	s32		dma_range;	/* DMA address range in megabytes. */
-	s32		max_dma_burst;	/* Maximum DMA burst length. */
-	s32		parity;		/* System module supports TC parity. */
-	s32		reserved[4];
-};
-
-/*
- * TURBOchannel bus.
- */
-struct tc_bus {
-	struct list_head devices;	/* List of devices on this bus. */
-	struct resource	resource[2];	/* Address space routed to this bus. */
-
-	struct device	dev;
-	char		name[13];
-	resource_size_t	slot_base;
-	resource_size_t	ext_slot_base;
-	resource_size_t	ext_slot_size;
-	int		num_tcslots;
-	struct tcinfo	info;
-};
-
-/*
- * TURBOchannel device.
- */
-struct tc_dev {
-	struct list_head node;		/* Node in list of all TC devices. */
-	struct tc_bus	*bus;		/* Bus this device is on. */
-	struct tc_driver *driver;	/* Which driver has allocated this
-					   device. */
-	struct device	dev;		/* Generic device interface. */
-	struct resource	resource;	/* Address space of this device. */
-	char		vendor[9];
-	char		name[9];
-	char		firmware[9];
-	int		interrupt;
-	int		slot;
-};
-
-#define to_tc_dev(n) container_of(n, struct tc_dev, dev)
-
-struct tc_device_id {
-	char		vendor[9];
-	char		name[9];
-};
-
-/*
- * TURBOchannel driver.
- */
-struct tc_driver {
-	struct list_head node;
-	const struct tc_device_id *id_table;
-	struct device_driver driver;
-};
-
-#define to_tc_driver(drv) container_of(drv, struct tc_driver, driver)
-
-/*
- * Return TURBOchannel clock frequency in Hz.
- */
-static inline unsigned long tc_get_speed(struct tc_bus *tbus)
-{
-	return 100000 * (10000 / (unsigned long)tbus->info.clk_period);
-}
-
-#ifdef CONFIG_TC
-
-extern struct bus_type tc_bus_type;
-
-extern int tc_register_driver(struct tc_driver *tdrv);
-extern void tc_unregister_driver(struct tc_driver *tdrv);
-
-#else /* !CONFIG_TC */
-
-static inline int tc_register_driver(struct tc_driver *tdrv) { return 0; }
-static inline void tc_unregister_driver(struct tc_driver *tdrv) { }
-
-#endif /* CONFIG_TC */
-
-/*
- * These have to be provided by the architecture.
- */
-extern int tc_preadb(u8 *valp, void __iomem *addr);
-extern int tc_bus_get_info(struct tc_bus *tbus);
-extern void tc_device_get_irq(struct tc_dev *tdev);
-
-#endif /* _LINUX_TC_H */
diff --git a/ANDROID_3.4.5/include/linux/tc_act/Kbuild b/ANDROID_3.4.5/include/linux/tc_act/Kbuild
deleted file mode 100644
index 67b501c3..00000000
--- a/ANDROID_3.4.5/include/linux/tc_act/Kbuild
+++ /dev/null
@@ -1,7 +0,0 @@
-header-y += tc_gact.h
-header-y += tc_ipt.h
-header-y += tc_mirred.h
-header-y += tc_pedit.h
-header-y += tc_nat.h
-header-y += tc_skbedit.h
-header-y += tc_csum.h
diff --git a/ANDROID_3.4.5/include/linux/tc_act/tc_csum.h b/ANDROID_3.4.5/include/linux/tc_act/tc_csum.h
deleted file mode 100644
index a047c49a..00000000
--- a/ANDROID_3.4.5/include/linux/tc_act/tc_csum.h
+++ /dev/null
@@ -1,32 +0,0 @@
-#ifndef __LINUX_TC_CSUM_H
-#define __LINUX_TC_CSUM_H
-
-#include <linux/types.h>
-#include <linux/pkt_cls.h>
-
-#define TCA_ACT_CSUM 16
-
-enum {
-	TCA_CSUM_UNSPEC,
-	TCA_CSUM_PARMS,
-	TCA_CSUM_TM,
-	__TCA_CSUM_MAX
-};
-#define TCA_CSUM_MAX (__TCA_CSUM_MAX - 1)
-
-enum {
-	TCA_CSUM_UPDATE_FLAG_IPV4HDR = 1,
-	TCA_CSUM_UPDATE_FLAG_ICMP    = 2,
-	TCA_CSUM_UPDATE_FLAG_IGMP    = 4,
-	TCA_CSUM_UPDATE_FLAG_TCP     = 8,
-	TCA_CSUM_UPDATE_FLAG_UDP     = 16,
-	TCA_CSUM_UPDATE_FLAG_UDPLITE = 32
-};
-
-struct tc_csum {
-	tc_gen;
-
-	__u32 update_flags;
-};
-
-#endif /* __LINUX_TC_CSUM_H */
diff --git a/ANDROID_3.4.5/include/linux/tc_act/tc_defact.h b/ANDROID_3.4.5/include/linux/tc_act/tc_defact.h
deleted file mode 100644
index 6f65d07c..00000000
--- a/ANDROID_3.4.5/include/linux/tc_act/tc_defact.h
+++ /dev/null
@@ -1,19 +0,0 @@
-#ifndef __LINUX_TC_DEF_H
-#define __LINUX_TC_DEF_H
-
-#include <linux/pkt_cls.h>
-
-struct tc_defact {
-	tc_gen;
-};
-                                                                                
-enum {
-	TCA_DEF_UNSPEC,
-	TCA_DEF_TM,
-	TCA_DEF_PARMS,
-	TCA_DEF_DATA,
-	__TCA_DEF_MAX
-};
-#define TCA_DEF_MAX (__TCA_DEF_MAX - 1)
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/tc_act/tc_gact.h b/ANDROID_3.4.5/include/linux/tc_act/tc_gact.h
deleted file mode 100644
index f7bf94ee..00000000
--- a/ANDROID_3.4.5/include/linux/tc_act/tc_gact.h
+++ /dev/null
@@ -1,32 +0,0 @@
-#ifndef __LINUX_TC_GACT_H
-#define __LINUX_TC_GACT_H
-
-#include <linux/types.h>
-#include <linux/pkt_cls.h>
-
-#define TCA_ACT_GACT 5
-struct tc_gact {
-	tc_gen;
-
-};
-
-struct tc_gact_p {
-#define PGACT_NONE              0
-#define PGACT_NETRAND           1
-#define PGACT_DETERM            2
-#define MAX_RAND                (PGACT_DETERM + 1 )
-	__u16                 ptype;
-	__u16                 pval;
-	int                   paction;
-};
- 
-enum {
-	TCA_GACT_UNSPEC,
-	TCA_GACT_TM,
-	TCA_GACT_PARMS,
-	TCA_GACT_PROB,
-	__TCA_GACT_MAX
-};
-#define TCA_GACT_MAX (__TCA_GACT_MAX - 1)
- 
-#endif
diff --git a/ANDROID_3.4.5/include/linux/tc_act/tc_ipt.h b/ANDROID_3.4.5/include/linux/tc_act/tc_ipt.h
deleted file mode 100644
index a2335563..00000000
--- a/ANDROID_3.4.5/include/linux/tc_act/tc_ipt.h
+++ /dev/null
@@ -1,20 +0,0 @@
-#ifndef __LINUX_TC_IPT_H
-#define __LINUX_TC_IPT_H
-
-#include <linux/pkt_cls.h>
-
-#define TCA_ACT_IPT 6
-
-enum {
-	TCA_IPT_UNSPEC,
-	TCA_IPT_TABLE,
-	TCA_IPT_HOOK,
-	TCA_IPT_INDEX,
-	TCA_IPT_CNT,
-	TCA_IPT_TM,
-	TCA_IPT_TARG,
-	__TCA_IPT_MAX
-};
-#define TCA_IPT_MAX (__TCA_IPT_MAX - 1)
-                                                                                
-#endif
diff --git a/ANDROID_3.4.5/include/linux/tc_act/tc_mirred.h b/ANDROID_3.4.5/include/linux/tc_act/tc_mirred.h
deleted file mode 100644
index 7561750e..00000000
--- a/ANDROID_3.4.5/include/linux/tc_act/tc_mirred.h
+++ /dev/null
@@ -1,27 +0,0 @@
-#ifndef __LINUX_TC_MIR_H
-#define __LINUX_TC_MIR_H
-
-#include <linux/types.h>
-#include <linux/pkt_cls.h>
-
-#define TCA_ACT_MIRRED 8
-#define TCA_EGRESS_REDIR 1  /* packet redirect to EGRESS*/
-#define TCA_EGRESS_MIRROR 2 /* mirror packet to EGRESS */
-#define TCA_INGRESS_REDIR 3  /* packet redirect to INGRESS*/
-#define TCA_INGRESS_MIRROR 4 /* mirror packet to INGRESS */
-                                                                                
-struct tc_mirred {
-	tc_gen;
-	int                     eaction;   /* one of IN/EGRESS_MIRROR/REDIR */
-	__u32                   ifindex;  /* ifindex of egress port */
-};
-                                                                                
-enum {
-	TCA_MIRRED_UNSPEC,
-	TCA_MIRRED_TM,
-	TCA_MIRRED_PARMS,
-	__TCA_MIRRED_MAX
-};
-#define TCA_MIRRED_MAX (__TCA_MIRRED_MAX - 1)
-                                                                                
-#endif
diff --git a/ANDROID_3.4.5/include/linux/tc_act/tc_nat.h b/ANDROID_3.4.5/include/linux/tc_act/tc_nat.h
deleted file mode 100644
index 6663aeba..00000000
--- a/ANDROID_3.4.5/include/linux/tc_act/tc_nat.h
+++ /dev/null
@@ -1,27 +0,0 @@
-#ifndef __LINUX_TC_NAT_H
-#define __LINUX_TC_NAT_H
-
-#include <linux/pkt_cls.h>
-#include <linux/types.h>
-
-#define TCA_ACT_NAT 9
-
-enum {
-	TCA_NAT_UNSPEC,
-	TCA_NAT_PARMS,
-	TCA_NAT_TM,
-	__TCA_NAT_MAX
-};
-#define TCA_NAT_MAX (__TCA_NAT_MAX - 1)
-
-#define TCA_NAT_FLAG_EGRESS 1
-
-struct tc_nat {
-	tc_gen;
-	__be32 old_addr;
-	__be32 new_addr;
-	__be32 mask;
-	__u32 flags;
-};
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/tc_act/tc_pedit.h b/ANDROID_3.4.5/include/linux/tc_act/tc_pedit.h
deleted file mode 100644
index 716cfabc..00000000
--- a/ANDROID_3.4.5/include/linux/tc_act/tc_pedit.h
+++ /dev/null
@@ -1,34 +0,0 @@
-#ifndef __LINUX_TC_PED_H
-#define __LINUX_TC_PED_H
-
-#include <linux/types.h>
-#include <linux/pkt_cls.h>
-
-#define TCA_ACT_PEDIT 7
-
-enum {
-	TCA_PEDIT_UNSPEC,
-	TCA_PEDIT_TM,
-	TCA_PEDIT_PARMS,
-	__TCA_PEDIT_MAX
-};
-#define TCA_PEDIT_MAX (__TCA_PEDIT_MAX - 1)
-                                                                                
-struct tc_pedit_key {
-	__u32           mask;  /* AND */
-	__u32           val;   /*XOR */
-	__u32           off;  /*offset */
-	__u32           at;
-	__u32           offmask;
-	__u32           shift;
-};
-                                                                                
-struct tc_pedit_sel {
-	tc_gen;
-	unsigned char           nkeys;
-	unsigned char           flags;
-	struct tc_pedit_key     keys[0];
-};
-#define tc_pedit tc_pedit_sel
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/tc_act/tc_skbedit.h b/ANDROID_3.4.5/include/linux/tc_act/tc_skbedit.h
deleted file mode 100644
index 7a2e910a..00000000
--- a/ANDROID_3.4.5/include/linux/tc_act/tc_skbedit.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- * Copyright (c) 2008, Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc., 59 Temple
- * Place - Suite 330, Boston, MA 02111-1307 USA.
- *
- * Author: Alexander Duyck <alexander.h.duyck@intel.com>
- */
-
-#ifndef __LINUX_TC_SKBEDIT_H
-#define __LINUX_TC_SKBEDIT_H
-
-#include <linux/pkt_cls.h>
-
-#define TCA_ACT_SKBEDIT 11
-
-#define SKBEDIT_F_PRIORITY		0x1
-#define SKBEDIT_F_QUEUE_MAPPING		0x2
-#define SKBEDIT_F_MARK			0x4
-
-struct tc_skbedit {
-	tc_gen;
-};
-
-enum {
-	TCA_SKBEDIT_UNSPEC,
-	TCA_SKBEDIT_TM,
-	TCA_SKBEDIT_PARMS,
-	TCA_SKBEDIT_PRIORITY,
-	TCA_SKBEDIT_QUEUE_MAPPING,
-	TCA_SKBEDIT_MARK,
-	__TCA_SKBEDIT_MAX
-};
-#define TCA_SKBEDIT_MAX (__TCA_SKBEDIT_MAX - 1)
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/tc_ematch/Kbuild b/ANDROID_3.4.5/include/linux/tc_ematch/Kbuild
deleted file mode 100644
index 4a58a1c3..00000000
--- a/ANDROID_3.4.5/include/linux/tc_ematch/Kbuild
+++ /dev/null
@@ -1,4 +0,0 @@
-header-y += tc_em_cmp.h
-header-y += tc_em_meta.h
-header-y += tc_em_nbyte.h
-header-y += tc_em_text.h
diff --git a/ANDROID_3.4.5/include/linux/tc_ematch/tc_em_cmp.h b/ANDROID_3.4.5/include/linux/tc_ematch/tc_em_cmp.h
deleted file mode 100644
index f34bb1ba..00000000
--- a/ANDROID_3.4.5/include/linux/tc_ematch/tc_em_cmp.h
+++ /dev/null
@@ -1,25 +0,0 @@
-#ifndef __LINUX_TC_EM_CMP_H
-#define __LINUX_TC_EM_CMP_H
-
-#include <linux/types.h>
-#include <linux/pkt_cls.h>
-
-struct tcf_em_cmp {
-	__u32		val;
-	__u32		mask;
-	__u16		off;
-	__u8		align:4;
-	__u8		flags:4;
-	__u8		layer:4;
-	__u8		opnd:4;
-};
-
-enum {
-	TCF_EM_ALIGN_U8  = 1,
-	TCF_EM_ALIGN_U16 = 2,
-	TCF_EM_ALIGN_U32 = 4
-};
-
-#define TCF_EM_CMP_TRANS	1
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/tc_ematch/tc_em_meta.h b/ANDROID_3.4.5/include/linux/tc_ematch/tc_em_meta.h
deleted file mode 100644
index b11f8ce2..00000000
--- a/ANDROID_3.4.5/include/linux/tc_ematch/tc_em_meta.h
+++ /dev/null
@@ -1,92 +0,0 @@
-#ifndef __LINUX_TC_EM_META_H
-#define __LINUX_TC_EM_META_H
-
-#include <linux/types.h>
-#include <linux/pkt_cls.h>
-
-enum {
-	TCA_EM_META_UNSPEC,
-	TCA_EM_META_HDR,
-	TCA_EM_META_LVALUE,
-	TCA_EM_META_RVALUE,
-	__TCA_EM_META_MAX
-};
-#define TCA_EM_META_MAX (__TCA_EM_META_MAX - 1)
-
-struct tcf_meta_val {
-	__u16			kind;
-	__u8			shift;
-	__u8			op;
-};
-
-#define TCF_META_TYPE_MASK	(0xf << 12)
-#define TCF_META_TYPE(kind)	(((kind) & TCF_META_TYPE_MASK) >> 12)
-#define TCF_META_ID_MASK	0x7ff
-#define TCF_META_ID(kind)	((kind) & TCF_META_ID_MASK)
-
-enum {
-	TCF_META_TYPE_VAR,
-	TCF_META_TYPE_INT,
-	__TCF_META_TYPE_MAX
-};
-#define TCF_META_TYPE_MAX (__TCF_META_TYPE_MAX - 1)
-
-enum {
-	TCF_META_ID_VALUE,
-	TCF_META_ID_RANDOM,
-	TCF_META_ID_LOADAVG_0,
-	TCF_META_ID_LOADAVG_1,
-	TCF_META_ID_LOADAVG_2,
-	TCF_META_ID_DEV,
-	TCF_META_ID_PRIORITY,
-	TCF_META_ID_PROTOCOL,
-	TCF_META_ID_PKTTYPE,
-	TCF_META_ID_PKTLEN,
-	TCF_META_ID_DATALEN,
-	TCF_META_ID_MACLEN,
-	TCF_META_ID_NFMARK,
-	TCF_META_ID_TCINDEX,
-	TCF_META_ID_RTCLASSID,
-	TCF_META_ID_RTIIF,
-	TCF_META_ID_SK_FAMILY,
-	TCF_META_ID_SK_STATE,
-	TCF_META_ID_SK_REUSE,
-	TCF_META_ID_SK_BOUND_IF,
-	TCF_META_ID_SK_REFCNT,
-	TCF_META_ID_SK_SHUTDOWN,
-	TCF_META_ID_SK_PROTO,
-	TCF_META_ID_SK_TYPE,
-	TCF_META_ID_SK_RCVBUF,
-	TCF_META_ID_SK_RMEM_ALLOC,
-	TCF_META_ID_SK_WMEM_ALLOC,
-	TCF_META_ID_SK_OMEM_ALLOC,
-	TCF_META_ID_SK_WMEM_QUEUED,
-	TCF_META_ID_SK_RCV_QLEN,
-	TCF_META_ID_SK_SND_QLEN,
- 	TCF_META_ID_SK_ERR_QLEN,
-	TCF_META_ID_SK_FORWARD_ALLOCS,
-	TCF_META_ID_SK_SNDBUF,
- 	TCF_META_ID_SK_ALLOCS,
-	__TCF_META_ID_SK_ROUTE_CAPS,	/* unimplemented but in ABI already */
- 	TCF_META_ID_SK_HASH,
- 	TCF_META_ID_SK_LINGERTIME,
- 	TCF_META_ID_SK_ACK_BACKLOG,
- 	TCF_META_ID_SK_MAX_ACK_BACKLOG,
- 	TCF_META_ID_SK_PRIO,
- 	TCF_META_ID_SK_RCVLOWAT,
- 	TCF_META_ID_SK_RCVTIMEO,
- 	TCF_META_ID_SK_SNDTIMEO,
- 	TCF_META_ID_SK_SENDMSG_OFF,
- 	TCF_META_ID_SK_WRITE_PENDING,
-	TCF_META_ID_VLAN_TAG,
-	TCF_META_ID_RXHASH,
-	__TCF_META_ID_MAX
-};
-#define TCF_META_ID_MAX (__TCF_META_ID_MAX - 1)
-
-struct tcf_meta_hdr {
-	struct tcf_meta_val	left;
-	struct tcf_meta_val	right;
-};
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/tc_ematch/tc_em_nbyte.h b/ANDROID_3.4.5/include/linux/tc_ematch/tc_em_nbyte.h
deleted file mode 100644
index 7172cfb9..00000000
--- a/ANDROID_3.4.5/include/linux/tc_ematch/tc_em_nbyte.h
+++ /dev/null
@@ -1,13 +0,0 @@
-#ifndef __LINUX_TC_EM_NBYTE_H
-#define __LINUX_TC_EM_NBYTE_H
-
-#include <linux/types.h>
-#include <linux/pkt_cls.h>
-
-struct tcf_em_nbyte {
-	__u16		off;
-	__u16		len:12;
-	__u8		layer:4;
-};
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/tc_ematch/tc_em_text.h b/ANDROID_3.4.5/include/linux/tc_ematch/tc_em_text.h
deleted file mode 100644
index 5aac4045..00000000
--- a/ANDROID_3.4.5/include/linux/tc_ematch/tc_em_text.h
+++ /dev/null
@@ -1,19 +0,0 @@
-#ifndef __LINUX_TC_EM_TEXT_H
-#define __LINUX_TC_EM_TEXT_H
-
-#include <linux/types.h>
-#include <linux/pkt_cls.h>
-
-#define TC_EM_TEXT_ALGOSIZ	16
-
-struct tcf_em_text {
-	char		algo[TC_EM_TEXT_ALGOSIZ];
-	__u16		from_offset;
-	__u16		to_offset;
-	__u16		pattern_len;
-	__u8		from_layer:4;
-	__u8		to_layer:4;
-	__u8		pad;
-};
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/tca6416_keypad.h b/ANDROID_3.4.5/include/linux/tca6416_keypad.h
deleted file mode 100644
index 7bd266f3..00000000
--- a/ANDROID_3.4.5/include/linux/tca6416_keypad.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * tca6416 keypad platform support
- *
- * Copyright (C) 2010 Texas Instruments
- *
- * Author: Sriramakrishnan <srk@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef _TCA6416_KEYS_H
-#define _TCA6416_KEYS_H
-
-#include <linux/types.h>
-
-struct tca6416_button {
-	/* Configuration parameters */
-	int code;		/* input event code (KEY_*, SW_*) */
-	int active_low;
-	int type;		/* input event type (EV_KEY, EV_SW) */
-};
-
-struct tca6416_keys_platform_data {
-	struct tca6416_button *buttons;
-	int nbuttons;
-	unsigned int rep:1;	/* enable input subsystem auto repeat */
-	uint16_t pinmask;
-	uint16_t invert;
-	int irq_is_gpio;
-	int use_polling;	/* use polling if Interrupt is not connected*/
-};
-#endif
diff --git a/ANDROID_3.4.5/include/linux/tcp.h b/ANDROID_3.4.5/include/linux/tcp.h
deleted file mode 100644
index b6c62d29..00000000
--- a/ANDROID_3.4.5/include/linux/tcp.h
+++ /dev/null
@@ -1,505 +0,0 @@
-/*
- * INET		An implementation of the TCP/IP protocol suite for the LINUX
- *		operating system.  INET is implemented using the  BSD Socket
- *		interface as the means of communication with the user level.
- *
- *		Definitions for the TCP protocol.
- *
- * Version:	@(#)tcp.h	1.0.2	04/28/93
- *
- * Author:	Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
- *
- *		This program is free software; you can redistribute it and/or
- *		modify it under the terms of the GNU General Public License
- *		as published by the Free Software Foundation; either version
- *		2 of the License, or (at your option) any later version.
- */
-#ifndef _LINUX_TCP_H
-#define _LINUX_TCP_H
-
-#include <linux/types.h>
-#include <asm/byteorder.h>
-#include <linux/socket.h>
-
-struct tcphdr {
-	__be16	source;
-	__be16	dest;
-	__be32	seq;
-	__be32	ack_seq;
-#if defined(__LITTLE_ENDIAN_BITFIELD)
-	__u16	res1:4,
-		doff:4,
-		fin:1,
-		syn:1,
-		rst:1,
-		psh:1,
-		ack:1,
-		urg:1,
-		ece:1,
-		cwr:1;
-#elif defined(__BIG_ENDIAN_BITFIELD)
-	__u16	doff:4,
-		res1:4,
-		cwr:1,
-		ece:1,
-		urg:1,
-		ack:1,
-		psh:1,
-		rst:1,
-		syn:1,
-		fin:1;
-#else
-#error	"Adjust your <asm/byteorder.h> defines"
-#endif	
-	__be16	window;
-	__sum16	check;
-	__be16	urg_ptr;
-};
-
-/*
- *	The union cast uses a gcc extension to avoid aliasing problems
- *  (union is compatible to any of its members)
- *  This means this part of the code is -fstrict-aliasing safe now.
- */
-union tcp_word_hdr { 
-	struct tcphdr hdr;
-	__be32 		  words[5];
-}; 
-
-#define tcp_flag_word(tp) ( ((union tcp_word_hdr *)(tp))->words [3]) 
-
-enum { 
-	TCP_FLAG_CWR = __cpu_to_be32(0x00800000),
-	TCP_FLAG_ECE = __cpu_to_be32(0x00400000),
-	TCP_FLAG_URG = __cpu_to_be32(0x00200000),
-	TCP_FLAG_ACK = __cpu_to_be32(0x00100000),
-	TCP_FLAG_PSH = __cpu_to_be32(0x00080000),
-	TCP_FLAG_RST = __cpu_to_be32(0x00040000),
-	TCP_FLAG_SYN = __cpu_to_be32(0x00020000),
-	TCP_FLAG_FIN = __cpu_to_be32(0x00010000),
-	TCP_RESERVED_BITS = __cpu_to_be32(0x0F000000),
-	TCP_DATA_OFFSET = __cpu_to_be32(0xF0000000)
-}; 
-
-/*
- * TCP general constants
- */
-#define TCP_MSS_DEFAULT		 536U	/* IPv4 (RFC1122, RFC2581) */
-#define TCP_MSS_DESIRED		1220U	/* IPv6 (tunneled), EDNS0 (RFC3226) */
-
-/* TCP socket options */
-#define TCP_NODELAY		1	/* Turn off Nagle's algorithm. */
-#define TCP_MAXSEG		2	/* Limit MSS */
-#define TCP_CORK		3	/* Never send partially complete segments */
-#define TCP_KEEPIDLE		4	/* Start keeplives after this period */
-#define TCP_KEEPINTVL		5	/* Interval between keepalives */
-#define TCP_KEEPCNT		6	/* Number of keepalives before death */
-#define TCP_SYNCNT		7	/* Number of SYN retransmits */
-#define TCP_LINGER2		8	/* Life time of orphaned FIN-WAIT-2 state */
-#define TCP_DEFER_ACCEPT	9	/* Wake up listener only when data arrive */
-#define TCP_WINDOW_CLAMP	10	/* Bound advertised window */
-#define TCP_INFO		11	/* Information about this connection. */
-#define TCP_QUICKACK		12	/* Block/reenable quick acks */
-#define TCP_CONGESTION		13	/* Congestion control algorithm */
-#define TCP_MD5SIG		14	/* TCP MD5 Signature (RFC2385) */
-#define TCP_COOKIE_TRANSACTIONS	15	/* TCP Cookie Transactions */
-#define TCP_THIN_LINEAR_TIMEOUTS 16      /* Use linear timeouts for thin streams*/
-#define TCP_THIN_DUPACK         17      /* Fast retrans. after 1 dupack */
-#define TCP_USER_TIMEOUT	18	/* How long for loss retry before timeout */
-
-/* for TCP_INFO socket option */
-#define TCPI_OPT_TIMESTAMPS	1
-#define TCPI_OPT_SACK		2
-#define TCPI_OPT_WSCALE		4
-#define TCPI_OPT_ECN		8 /* ECN was negociated at TCP session init */
-#define TCPI_OPT_ECN_SEEN	16 /* we received at least one packet with ECT */
-
-enum tcp_ca_state {
-	TCP_CA_Open = 0,
-#define TCPF_CA_Open	(1<<TCP_CA_Open)
-	TCP_CA_Disorder = 1,
-#define TCPF_CA_Disorder (1<<TCP_CA_Disorder)
-	TCP_CA_CWR = 2,
-#define TCPF_CA_CWR	(1<<TCP_CA_CWR)
-	TCP_CA_Recovery = 3,
-#define TCPF_CA_Recovery (1<<TCP_CA_Recovery)
-	TCP_CA_Loss = 4
-#define TCPF_CA_Loss	(1<<TCP_CA_Loss)
-};
-
-struct tcp_info {
-	__u8	tcpi_state;
-	__u8	tcpi_ca_state;
-	__u8	tcpi_retransmits;
-	__u8	tcpi_probes;
-	__u8	tcpi_backoff;
-	__u8	tcpi_options;
-	__u8	tcpi_snd_wscale : 4, tcpi_rcv_wscale : 4;
-
-	__u32	tcpi_rto;
-	__u32	tcpi_ato;
-	__u32	tcpi_snd_mss;
-	__u32	tcpi_rcv_mss;
-
-	__u32	tcpi_unacked;
-	__u32	tcpi_sacked;
-	__u32	tcpi_lost;
-	__u32	tcpi_retrans;
-	__u32	tcpi_fackets;
-
-	/* Times. */
-	__u32	tcpi_last_data_sent;
-	__u32	tcpi_last_ack_sent;     /* Not remembered, sorry. */
-	__u32	tcpi_last_data_recv;
-	__u32	tcpi_last_ack_recv;
-
-	/* Metrics. */
-	__u32	tcpi_pmtu;
-	__u32	tcpi_rcv_ssthresh;
-	__u32	tcpi_rtt;
-	__u32	tcpi_rttvar;
-	__u32	tcpi_snd_ssthresh;
-	__u32	tcpi_snd_cwnd;
-	__u32	tcpi_advmss;
-	__u32	tcpi_reordering;
-
-	__u32	tcpi_rcv_rtt;
-	__u32	tcpi_rcv_space;
-
-	__u32	tcpi_total_retrans;
-};
-
-/* for TCP_MD5SIG socket option */
-#define TCP_MD5SIG_MAXKEYLEN	80
-
-struct tcp_md5sig {
-	struct __kernel_sockaddr_storage tcpm_addr;	/* address associated */
-	__u16	__tcpm_pad1;				/* zero */
-	__u16	tcpm_keylen;				/* key length */
-	__u32	__tcpm_pad2;				/* zero */
-	__u8	tcpm_key[TCP_MD5SIG_MAXKEYLEN];		/* key (binary) */
-};
-
-/* for TCP_COOKIE_TRANSACTIONS (TCPCT) socket option */
-#define TCP_COOKIE_MIN		 8		/*  64-bits */
-#define TCP_COOKIE_MAX		16		/* 128-bits */
-#define TCP_COOKIE_PAIR_SIZE	(2*TCP_COOKIE_MAX)
-
-/* Flags for both getsockopt and setsockopt */
-#define TCP_COOKIE_IN_ALWAYS	(1 << 0)	/* Discard SYN without cookie */
-#define TCP_COOKIE_OUT_NEVER	(1 << 1)	/* Prohibit outgoing cookies,
-						 * supercedes everything. */
-
-/* Flags for getsockopt */
-#define TCP_S_DATA_IN		(1 << 2)	/* Was data received? */
-#define TCP_S_DATA_OUT		(1 << 3)	/* Was data sent? */
-
-/* TCP_COOKIE_TRANSACTIONS data */
-struct tcp_cookie_transactions {
-	__u16	tcpct_flags;			/* see above */
-	__u8	__tcpct_pad1;			/* zero */
-	__u8	tcpct_cookie_desired;		/* bytes */
-	__u16	tcpct_s_data_desired;		/* bytes of variable data */
-	__u16	tcpct_used;			/* bytes in value */
-	__u8	tcpct_value[TCP_MSS_DEFAULT];
-};
-
-#ifdef __KERNEL__
-
-#include <linux/skbuff.h>
-#include <linux/dmaengine.h>
-#include <net/sock.h>
-#include <net/inet_connection_sock.h>
-#include <net/inet_timewait_sock.h>
-
-static inline struct tcphdr *tcp_hdr(const struct sk_buff *skb)
-{
-	return (struct tcphdr *)skb_transport_header(skb);
-}
-
-static inline unsigned int tcp_hdrlen(const struct sk_buff *skb)
-{
-	return tcp_hdr(skb)->doff * 4;
-}
-
-static inline unsigned int tcp_optlen(const struct sk_buff *skb)
-{
-	return (tcp_hdr(skb)->doff - 5) * 4;
-}
-
-/* This defines a selective acknowledgement block. */
-struct tcp_sack_block_wire {
-	__be32	start_seq;
-	__be32	end_seq;
-};
-
-struct tcp_sack_block {
-	u32	start_seq;
-	u32	end_seq;
-};
-
-/*These are used to set the sack_ok field in struct tcp_options_received */
-#define TCP_SACK_SEEN     (1 << 0)   /*1 = peer is SACK capable, */
-#define TCP_FACK_ENABLED  (1 << 1)   /*1 = FACK is enabled locally*/
-#define TCP_DSACK_SEEN    (1 << 2)   /*1 = DSACK was received from peer*/
-
-struct tcp_options_received {
-/*	PAWS/RTTM data	*/
-	long	ts_recent_stamp;/* Time we stored ts_recent (for aging) */
-	u32	ts_recent;	/* Time stamp to echo next		*/
-	u32	rcv_tsval;	/* Time stamp value             	*/
-	u32	rcv_tsecr;	/* Time stamp echo reply        	*/
-	u16 	saw_tstamp : 1,	/* Saw TIMESTAMP on last packet		*/
-		tstamp_ok : 1,	/* TIMESTAMP seen on SYN packet		*/
-		dsack : 1,	/* D-SACK is scheduled			*/
-		wscale_ok : 1,	/* Wscale seen on SYN packet		*/
-		sack_ok : 4,	/* SACK seen on SYN packet		*/
-		snd_wscale : 4,	/* Window scaling received from sender	*/
-		rcv_wscale : 4;	/* Window scaling to send to receiver	*/
-	u8	cookie_plus:6,	/* bytes in authenticator/cookie option	*/
-		cookie_out_never:1,
-		cookie_in_always:1;
-	u8	num_sacks;	/* Number of SACK blocks		*/
-	u16	user_mss;	/* mss requested by user in ioctl	*/
-	u16	mss_clamp;	/* Maximal mss, negotiated at connection setup */
-};
-
-static inline void tcp_clear_options(struct tcp_options_received *rx_opt)
-{
-	rx_opt->tstamp_ok = rx_opt->sack_ok = 0;
-	rx_opt->wscale_ok = rx_opt->snd_wscale = 0;
-	rx_opt->cookie_plus = 0;
-}
-
-/* This is the max number of SACKS that we'll generate and process. It's safe
- * to increase this, although since:
- *   size = TCPOLEN_SACK_BASE_ALIGNED (4) + n * TCPOLEN_SACK_PERBLOCK (8)
- * only four options will fit in a standard TCP header */
-#define TCP_NUM_SACKS 4
-
-struct tcp_cookie_values;
-struct tcp_request_sock_ops;
-
-struct tcp_request_sock {
-	struct inet_request_sock 	req;
-#ifdef CONFIG_TCP_MD5SIG
-	/* Only used by TCP MD5 Signature so far. */
-	const struct tcp_request_sock_ops *af_specific;
-#endif
-	u32				rcv_isn;
-	u32				snt_isn;
-	u32				snt_synack; /* synack sent time */
-};
-
-static inline struct tcp_request_sock *tcp_rsk(const struct request_sock *req)
-{
-	return (struct tcp_request_sock *)req;
-}
-
-struct tcp_sock {
-	/* inet_connection_sock has to be the first member of tcp_sock */
-	struct inet_connection_sock	inet_conn;
-	u16	tcp_header_len;	/* Bytes of tcp header to send		*/
-	u16	xmit_size_goal_segs; /* Goal for segmenting output packets */
-
-/*
- *	Header prediction flags
- *	0x5?10 << 16 + snd_wnd in net byte order
- */
-	__be32	pred_flags;
-
-/*
- *	RFC793 variables by their proper names. This means you can
- *	read the code and the spec side by side (and laugh ...)
- *	See RFC793 and RFC1122. The RFC writes these in capitals.
- */
- 	u32	rcv_nxt;	/* What we want to receive next 	*/
-	u32	copied_seq;	/* Head of yet unread data		*/
-	u32	rcv_wup;	/* rcv_nxt on last window update sent	*/
- 	u32	snd_nxt;	/* Next sequence we send		*/
-
- 	u32	snd_una;	/* First byte we want an ack for	*/
- 	u32	snd_sml;	/* Last byte of the most recently transmitted small packet */
-	u32	rcv_tstamp;	/* timestamp of last received ACK (for keepalives) */
-	u32	lsndtime;	/* timestamp of last sent data packet (for restart window) */
-
-	/* Data for direct copy to user */
-	struct {
-		struct sk_buff_head	prequeue;
-		struct task_struct	*task;
-		struct iovec		*iov;
-		int			memory;
-		int			len;
-#ifdef CONFIG_NET_DMA
-		/* members for async copy */
-		struct dma_chan		*dma_chan;
-		int			wakeup;
-		struct dma_pinned_list	*pinned_list;
-		dma_cookie_t		dma_cookie;
-#endif
-	} ucopy;
-
-	u32	snd_wl1;	/* Sequence for window update		*/
-	u32	snd_wnd;	/* The window we expect to receive	*/
-	u32	max_window;	/* Maximal window ever seen from peer	*/
-	u32	mss_cache;	/* Cached effective mss, not including SACKS */
-
-	u32	window_clamp;	/* Maximal window to advertise		*/
-	u32	rcv_ssthresh;	/* Current window clamp			*/
-
-	u32	frto_highmark;	/* snd_nxt when RTO occurred */
-	u16	advmss;		/* Advertised MSS			*/
-	u8	frto_counter;	/* Number of new acks after RTO */
-	u8	nonagle     : 4,/* Disable Nagle algorithm?             */
-		thin_lto    : 1,/* Use linear timeouts for thin streams */
-		thin_dupack : 1,/* Fast retransmit on first dupack      */
-		unused      : 2;
-
-/* RTT measurement */
-	u32	srtt;		/* smoothed round trip time << 3	*/
-	u32	mdev;		/* medium deviation			*/
-	u32	mdev_max;	/* maximal mdev for the last rtt period	*/
-	u32	rttvar;		/* smoothed mdev_max			*/
-	u32	rtt_seq;	/* sequence number to update rttvar	*/
-
-	u32	packets_out;	/* Packets which are "in flight"	*/
-	u32	retrans_out;	/* Retransmitted packets out		*/
-
-	u16	urg_data;	/* Saved octet of OOB data and control flags */
-	u8	ecn_flags;	/* ECN status bits.			*/
-	u8	reordering;	/* Packet reordering metric.		*/
-	u32	snd_up;		/* Urgent pointer		*/
-
-	u8	keepalive_probes; /* num of allowed keep alive probes	*/
-/*
- *      Options received (usually on last packet, some only on SYN packets).
- */
-	struct tcp_options_received rx_opt;
-
-/*
- *	Slow start and congestion control (see also Nagle, and Karn & Partridge)
- */
- 	u32	snd_ssthresh;	/* Slow start size threshold		*/
- 	u32	snd_cwnd;	/* Sending congestion window		*/
-	u32	snd_cwnd_cnt;	/* Linear increase counter		*/
-	u32	snd_cwnd_clamp; /* Do not allow snd_cwnd to grow above this */
-	u32	snd_cwnd_used;
-	u32	snd_cwnd_stamp;
-	u32	prior_cwnd;	/* Congestion window at start of Recovery. */
-	u32	prr_delivered;	/* Number of newly delivered packets to
-				 * receiver in Recovery. */
-	u32	prr_out;	/* Total number of pkts sent during Recovery. */
-
- 	u32	rcv_wnd;	/* Current receiver window		*/
-	u32	write_seq;	/* Tail(+1) of data held in tcp send buffer */
-	u32	pushed_seq;	/* Last pushed seq, required to talk to windows */
-	u32	lost_out;	/* Lost packets			*/
-	u32	sacked_out;	/* SACK'd packets			*/
-	u32	fackets_out;	/* FACK'd packets			*/
-	u32	tso_deferred;
-	u32	bytes_acked;	/* Appropriate Byte Counting - RFC3465 */
-
-	/* from STCP, retrans queue hinting */
-	struct sk_buff* lost_skb_hint;
-	struct sk_buff *scoreboard_skb_hint;
-	struct sk_buff *retransmit_skb_hint;
-
-	struct sk_buff_head	out_of_order_queue; /* Out of order segments go here */
-
-	/* SACKs data, these 2 need to be together (see tcp_build_and_update_options) */
-	struct tcp_sack_block duplicate_sack[1]; /* D-SACK block */
-	struct tcp_sack_block selective_acks[4]; /* The SACKS themselves*/
-
-	struct tcp_sack_block recv_sack_cache[4];
-
-	struct sk_buff *highest_sack;   /* skb just after the highest
-					 * skb with SACKed bit set
-					 * (validity guaranteed only if
-					 * sacked_out > 0)
-					 */
-
-	int     lost_cnt_hint;
-	u32     retransmit_high;	/* L-bits may be on up to this seqno */
-
-	u32	lost_retrans_low;	/* Sent seq after any rxmit (lowest) */
-
-	u32	prior_ssthresh; /* ssthresh saved at recovery start	*/
-	u32	high_seq;	/* snd_nxt at onset of congestion	*/
-
-	u32	retrans_stamp;	/* Timestamp of the last retransmit,
-				 * also used in SYN-SENT to remember stamp of
-				 * the first SYN. */
-	u32	undo_marker;	/* tracking retrans started here. */
-	int	undo_retrans;	/* number of undoable retransmissions. */
-	u32	total_retrans;	/* Total retransmits for entire connection */
-
-	u32	urg_seq;	/* Seq of received urgent pointer */
-	unsigned int		keepalive_time;	  /* time before keep alive takes place */
-	unsigned int		keepalive_intvl;  /* time interval between keep alive probes */
-
-	int			linger2;
-
-/* Receiver side RTT estimation */
-	struct {
-		u32	rtt;
-		u32	seq;
-		u32	time;
-	} rcv_rtt_est;
-
-/* Receiver queue space */
-	struct {
-		int	space;
-		u32	seq;
-		u32	time;
-	} rcvq_space;
-
-/* TCP-specific MTU probe information. */
-	struct {
-		u32		  probe_seq_start;
-		u32		  probe_seq_end;
-	} mtu_probe;
-
-#ifdef CONFIG_TCP_MD5SIG
-/* TCP AF-Specific parts; only used by MD5 Signature support so far */
-	const struct tcp_sock_af_ops	*af_specific;
-
-/* TCP MD5 Signature Option information */
-	struct tcp_md5sig_info	__rcu *md5sig_info;
-#endif
-
-	/* When the cookie options are generated and exchanged, then this
-	 * object holds a reference to them (cookie_values->kref).  Also
-	 * contains related tcp_cookie_transactions fields.
-	 */
-	struct tcp_cookie_values  *cookie_values;
-};
-
-static inline struct tcp_sock *tcp_sk(const struct sock *sk)
-{
-	return (struct tcp_sock *)sk;
-}
-
-struct tcp_timewait_sock {
-	struct inet_timewait_sock tw_sk;
-	u32			  tw_rcv_nxt;
-	u32			  tw_snd_nxt;
-	u32			  tw_rcv_wnd;
-	u32			  tw_ts_recent;
-	long			  tw_ts_recent_stamp;
-#ifdef CONFIG_TCP_MD5SIG
-	struct tcp_md5sig_key	*tw_md5_key;
-#endif
-	/* Few sockets in timewait have cookies; in that case, then this
-	 * object holds a reference to them (tw_cookie_values->kref).
-	 */
-	struct tcp_cookie_values  *tw_cookie_values;
-};
-
-static inline struct tcp_timewait_sock *tcp_twsk(const struct sock *sk)
-{
-	return (struct tcp_timewait_sock *)sk;
-}
-
-#endif	/* __KERNEL__ */
-
-#endif	/* _LINUX_TCP_H */
diff --git a/ANDROID_3.4.5/include/linux/telephony.h b/ANDROID_3.4.5/include/linux/telephony.h
deleted file mode 100644
index f63afe33..00000000
--- a/ANDROID_3.4.5/include/linux/telephony.h
+++ /dev/null
@@ -1,262 +0,0 @@
-/******************************************************************************
- *
- *		telephony.h
- *
- *		Basic Linux Telephony Interface
- *
- *		(c) Copyright 1999-2001 Quicknet Technologies, Inc.
- *
- *		This program is free software; you can redistribute it and/or
- *		modify it under the terms of the GNU General Public License
- *		as published by the Free Software Foundation; either version
- *		2 of the License, or (at your option) any later version.
- *
- *    Authors:       Ed Okerson, <eokerson@quicknet.net>
- *                   Greg Herlein, <gherlein@quicknet.net>
- *
- *    Contributors:  Alan Cox, <alan@lxorguk.ukuu.org.uk>
- *                   David W. Erhart, <derhart@quicknet.net>
- *
- * IN NO EVENT SHALL QUICKNET TECHNOLOGIES, INC. BE LIABLE TO ANY PARTY FOR
- * DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING OUT
- * OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN IF QUICKNET
- * TECHNOLOGIES, INC. HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * QUICKNET TECHNOLOGIES, INC. SPECIFICALLY DISCLAIMS ANY WARRANTIES,
- * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS FOR A PARTICULAR PURPOSE.  THE SOFTWARE PROVIDED HEREUNDER IS
- * ON AN "AS IS" BASIS, AND QUICKNET TECHNOLOGIES, INC. HAS NO OBLIGATION
- * TO PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS.
- *
- *****************************************************************************/
-
-#ifndef TELEPHONY_H
-#define TELEPHONY_H
-
-#define TELEPHONY_VERSION 3013
-
-#define PHONE_VENDOR_IXJ          1
-#define PHONE_VENDOR_QUICKNET	  PHONE_VENDOR_IXJ
-#define PHONE_VENDOR_VOICETRONIX  2
-#define PHONE_VENDOR_ACULAB       3
-#define PHONE_VENDOR_DIGI         4
-#define PHONE_VENDOR_FRANKLIN     5
-
-/******************************************************************************
- *  Vendor Summary Information Area
- *
- *  Quicknet Technologies, Inc. - makes low density analog telephony cards
- *    with audio compression, POTS and PSTN interfaces (www.quicknet.net)
- *
- *  (other vendors following this API shuld add a short description of
- *  the telephony products they support under Linux)
- *
- *****************************************************************************/
-#define QTI_PHONEJACK		100
-#define QTI_LINEJACK		300
-#define QTI_PHONEJACK_LITE	400
-#define QTI_PHONEJACK_PCI	500
-#define QTI_PHONECARD		600
-
-/******************************************************************************
-*
-* The capabilities ioctls can inform you of the capabilities of each phone
-* device installed in your system.  The PHONECTL_CAPABILITIES ioctl
-* returns an integer value indicating the number of capabilities the   
-* device has.  The PHONECTL_CAPABILITIES_LIST will fill an array of 
-* capability structs with all of its capabilities.  The
-* PHONECTL_CAPABILITIES_CHECK takes a single capability struct and returns
-* a TRUE if the device has that capability, otherwise it returns false.
-* 
-******************************************************************************/
-typedef enum {
-	vendor = 0,
-	device,
-	port,
-	codec,
-	dsp
-} phone_cap;
-
-struct phone_capability {
-	char desc[80];
-	phone_cap captype;
-	int cap;
-	int handle;
-};
-
-typedef enum {
-	pots = 0,
-	pstn,
-	handset,
-	speaker
-} phone_ports;
-
-#define PHONE_CAPABILITIES              _IO  ('q', 0x80)
-#define PHONE_CAPABILITIES_LIST         _IOR ('q', 0x81, struct phone_capability *)
-#define PHONE_CAPABILITIES_CHECK        _IOW ('q', 0x82, struct phone_capability *)
-
-typedef struct {
-        char month[3];
-        char day[3];
-        char hour[3];
-        char min[3];
-        int numlen;
-        char number[11];
-        int namelen;
-        char name[80];
-} PHONE_CID;
- 
-#define PHONE_RING			_IO  ('q', 0x83)
-#define PHONE_HOOKSTATE			_IO  ('q', 0x84)
-#define PHONE_MAXRINGS			_IOW ('q', 0x85, char)
-#define PHONE_RING_CADENCE		_IOW ('q', 0x86, short)
-#define OLD_PHONE_RING_START            _IO  ('q', 0x87)
-#define PHONE_RING_START		_IOW ('q', 0x87, PHONE_CID *)
-#define PHONE_RING_STOP			_IO  ('q', 0x88)
-
-#define USA_RING_CADENCE	 0xC0C0
-
-#define PHONE_REC_CODEC			_IOW ('q', 0x89, int)
-#define PHONE_REC_START			_IO  ('q', 0x8A)
-#define PHONE_REC_STOP			_IO  ('q', 0x8B)
-#define PHONE_REC_DEPTH			_IOW ('q', 0x8C, int)
-#define PHONE_FRAME			_IOW ('q', 0x8D, int)
-#define PHONE_REC_VOLUME		_IOW ('q', 0x8E, int)
-#define PHONE_REC_VOLUME_LINEAR		_IOW ('q', 0xDB, int)
-#define PHONE_REC_LEVEL			_IO  ('q', 0x8F)
-
-#define PHONE_PLAY_CODEC		_IOW ('q', 0x90, int)
-#define PHONE_PLAY_START		_IO  ('q', 0x91)
-#define PHONE_PLAY_STOP			_IO  ('q', 0x92)
-#define PHONE_PLAY_DEPTH		_IOW ('q', 0x93, int)
-#define PHONE_PLAY_VOLUME		_IOW ('q', 0x94, int)
-#define PHONE_PLAY_VOLUME_LINEAR	_IOW ('q', 0xDC, int)
-#define PHONE_PLAY_LEVEL		_IO  ('q', 0x95)
-#define PHONE_DTMF_READY		_IOR ('q', 0x96, int)
-#define PHONE_GET_DTMF			_IOR ('q', 0x97, int)
-#define PHONE_GET_DTMF_ASCII		_IOR ('q', 0x98, int)
-#define PHONE_DTMF_OOB			_IOW ('q', 0x99, int)
-#define PHONE_EXCEPTION			_IOR ('q', 0x9A, int)
-#define PHONE_PLAY_TONE			_IOW ('q', 0x9B, char)
-#define PHONE_SET_TONE_ON_TIME		_IOW ('q', 0x9C, int)
-#define PHONE_SET_TONE_OFF_TIME		_IOW ('q', 0x9D, int)
-#define PHONE_GET_TONE_ON_TIME		_IO  ('q', 0x9E)
-#define PHONE_GET_TONE_OFF_TIME		_IO  ('q', 0x9F)
-#define PHONE_GET_TONE_STATE		_IO  ('q', 0xA0)
-#define PHONE_BUSY			_IO  ('q', 0xA1)
-#define PHONE_RINGBACK			_IO  ('q', 0xA2)
-#define PHONE_DIALTONE			_IO  ('q', 0xA3)
-#define PHONE_CPT_STOP			_IO  ('q', 0xA4)
-
-#define PHONE_PSTN_SET_STATE		_IOW ('q', 0xA4, int)
-#define PHONE_PSTN_GET_STATE		_IO  ('q', 0xA5)
-
-#define PSTN_ON_HOOK		0
-#define PSTN_RINGING		1
-#define PSTN_OFF_HOOK		2
-#define PSTN_PULSE_DIAL		3
-
-/******************************************************************************
-* 
-* The wink duration is tunable with this ioctl.  The default wink duration  
-* is 320ms.  You do not need to use this ioctl if you do not require a
-* different wink duration.
-* 
-******************************************************************************/
-#define PHONE_WINK_DURATION		_IOW ('q', 0xA6, int)
-#define PHONE_WINK			_IOW ('q', 0xAA, int)
-
-/******************************************************************************
-* 
-*  Codec Definitions
-* 
-******************************************************************************/
-typedef enum {
-	G723_63 = 1,
-	G723_53 = 2,
-	TS85 = 3,
-	TS48 = 4,
-	TS41 = 5,
-	G728 = 6,
-	G729 = 7,
-	ULAW = 8,
-	ALAW = 9,
-	LINEAR16 = 10,
-	LINEAR8 = 11,
-	WSS = 12,
-	G729B = 13
-} phone_codec;
-
-struct phone_codec_data
-{
-        phone_codec type;
-        unsigned short buf_min, buf_opt, buf_max;
-};
-
-#define PHONE_QUERY_CODEC               _IOWR ('q', 0xA7, struct phone_codec_data *)
-#define PHONE_PSTN_LINETEST             _IO ('q', 0xA8)
-
-/******************************************************************************
-* 
-* This controls the VAD/CNG functionality of G.723.1.  The driver will
-* always pass full size frames, any unused bytes will be padded with zeros,
-* and frames passed to the driver should also be padded with zeros.  The
-* frame type is encoded in the least significant two bits of the first
-* WORD of the frame as follows:
-*
-* bits 1-0	Frame Type	Data Rate		Significant Words
-* 00		0		G.723.1 6.3		12
-* 01		1		G.723.1 5.3		10
-* 10		2		VAD/CNG			 2
-* 11		3		Repeat last CNG		 2 bits
-* 
-******************************************************************************/
-#define PHONE_VAD			_IOW ('q', 0xA9, int)
-
-
-/******************************************************************************
-*
-* The exception structure allows us to multiplex multiple events onto the
-* select() exception set.  If any of these flags are set select() will
-* return with a positive indication on the exception set.  The dtmf_ready
-* bit indicates if there is data waiting in the DTMF buffer.  The
-* hookstate bit is set if there is a change in hookstate status, it does not
-* indicate the current state of the hookswitch.  The pstn_ring bit
-* indicates that the DAA on a LineJACK card has detected ring voltage on
-* the PSTN port.  The caller_id bit indicates that caller_id data has been
-* received and is available.  The pstn_wink bit indicates that the DAA on
-* the LineJACK has received a wink from the telco switch.  The f0, f1, f2
-* and f3 bits indicate that the filter has been triggered by detecting the
-* frequency programmed into that filter.
-*
-* The remaining bits should be set to zero. They will become defined over time
-* for other interface cards and their needs.
-*
-******************************************************************************/
-struct phone_except
-{
-	unsigned int dtmf_ready:1;
-	unsigned int hookstate:1;
-	unsigned int pstn_ring:1;
-	unsigned int caller_id:1;
-	unsigned int pstn_wink:1;
-	unsigned int f0:1;
-	unsigned int f1:1;
-	unsigned int f2:1;
-	unsigned int f3:1;
-	unsigned int flash:1;
-	unsigned int fc0:1;
-	unsigned int fc1:1;
-	unsigned int fc2:1;
-	unsigned int fc3:1;
-	unsigned int reserved:18;
-};
-
-union telephony_exception {
-	struct phone_except bits;
-	unsigned int bytes;
-};
-
-
-#endif		/* TELEPHONY_H */
-
diff --git a/ANDROID_3.4.5/include/linux/termios.h b/ANDROID_3.4.5/include/linux/termios.h
deleted file mode 100644
index 2acd0c1f..00000000
--- a/ANDROID_3.4.5/include/linux/termios.h
+++ /dev/null
@@ -1,22 +0,0 @@
-#ifndef _LINUX_TERMIOS_H
-#define _LINUX_TERMIOS_H
-
-#include <linux/types.h>
-#include <asm/termios.h>
-
-#define NFF	5
-
-struct termiox
-{
-	__u16	x_hflag;
-	__u16	x_cflag;
-	__u16	x_rflag[NFF];
-	__u16	x_sflag;
-};
-
-#define	RTSXOFF		0x0001		/* RTS flow control on input */
-#define	CTSXON		0x0002		/* CTS flow control on output */
-#define	DTRXOFF		0x0004		/* DTR flow control on input */
-#define DSRXON		0x0008		/* DCD flow control on output */
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/textsearch.h b/ANDROID_3.4.5/include/linux/textsearch.h
deleted file mode 100644
index cfaee869..00000000
--- a/ANDROID_3.4.5/include/linux/textsearch.h
+++ /dev/null
@@ -1,178 +0,0 @@
-#ifndef __LINUX_TEXTSEARCH_H
-#define __LINUX_TEXTSEARCH_H
-
-#include <linux/types.h>
-#include <linux/list.h>
-#include <linux/kernel.h>
-#include <linux/err.h>
-#include <linux/slab.h>
-
-struct module;
-
-struct ts_config;
-
-#define TS_AUTOLOAD	1 /* Automatically load textsearch modules when needed */
-#define TS_IGNORECASE	2 /* Searches string case insensitively */
-
-/**
- * struct ts_state - search state
- * @offset: offset for next match
- * @cb: control buffer, for persistent variables of get_next_block()
- */
-struct ts_state
-{
-	unsigned int		offset;
-	char			cb[40];
-};
-
-/**
- * struct ts_ops - search module operations
- * @name: name of search algorithm
- * @init: initialization function to prepare a search
- * @find: find the next occurrence of the pattern
- * @destroy: destroy algorithm specific parts of a search configuration
- * @get_pattern: return head of pattern
- * @get_pattern_len: return length of pattern
- * @owner: module reference to algorithm
- */
-struct ts_ops
-{
-	const char		*name;
-	struct ts_config *	(*init)(const void *, unsigned int, gfp_t, int);
-	unsigned int		(*find)(struct ts_config *,
-					struct ts_state *);
-	void			(*destroy)(struct ts_config *);
-	void *			(*get_pattern)(struct ts_config *);
-	unsigned int		(*get_pattern_len)(struct ts_config *);
-	struct module		*owner;
-	struct list_head	list;
-};
-
-/**
- * struct ts_config - search configuration
- * @ops: operations of chosen algorithm
- * @flags: flags
- * @get_next_block: callback to fetch the next block to search in
- * @finish: callback to finalize a search
- */
-struct ts_config
-{
-	struct ts_ops		*ops;
-	int 			flags;
-
-	/**
-	 * get_next_block - fetch next block of data
-	 * @consumed: number of bytes consumed by the caller
-	 * @dst: destination buffer
-	 * @conf: search configuration
-	 * @state: search state
-	 *
-	 * Called repeatedly until 0 is returned. Must assign the
-	 * head of the next block of data to &*dst and return the length
-	 * of the block or 0 if at the end. consumed == 0 indicates
-	 * a new search. May store/read persistent values in state->cb.
-	 */
-	unsigned int		(*get_next_block)(unsigned int consumed,
-						  const u8 **dst,
-						  struct ts_config *conf,
-						  struct ts_state *state);
-
-	/**
-	 * finish - finalize/clean a series of get_next_block() calls
-	 * @conf: search configuration
-	 * @state: search state
-	 *
-	 * Called after the last use of get_next_block(), may be used
-	 * to cleanup any leftovers.
-	 */
-	void			(*finish)(struct ts_config *conf,
-					  struct ts_state *state);
-};
-
-/**
- * textsearch_next - continue searching for a pattern
- * @conf: search configuration
- * @state: search state
- *
- * Continues a search looking for more occurrences of the pattern.
- * textsearch_find() must be called to find the first occurrence
- * in order to reset the state.
- *
- * Returns the position of the next occurrence of the pattern or
- * UINT_MAX if not match was found.
- */ 
-static inline unsigned int textsearch_next(struct ts_config *conf,
-					   struct ts_state *state)
-{
-	unsigned int ret = conf->ops->find(conf, state);
-
-	if (conf->finish)
-		conf->finish(conf, state);
-
-	return ret;
-}
-
-/**
- * textsearch_find - start searching for a pattern
- * @conf: search configuration
- * @state: search state
- *
- * Returns the position of first occurrence of the pattern or
- * UINT_MAX if no match was found.
- */ 
-static inline unsigned int textsearch_find(struct ts_config *conf,
-					   struct ts_state *state)
-{
-	state->offset = 0;
-	return textsearch_next(conf, state);
-}
-
-/**
- * textsearch_get_pattern - return head of the pattern
- * @conf: search configuration
- */
-static inline void *textsearch_get_pattern(struct ts_config *conf)
-{
-	return conf->ops->get_pattern(conf);
-}
-
-/**
- * textsearch_get_pattern_len - return length of the pattern
- * @conf: search configuration
- */
-static inline unsigned int textsearch_get_pattern_len(struct ts_config *conf)
-{
-	return conf->ops->get_pattern_len(conf);
-}
-
-extern int textsearch_register(struct ts_ops *);
-extern int textsearch_unregister(struct ts_ops *);
-extern struct ts_config *textsearch_prepare(const char *, const void *,
-					    unsigned int, gfp_t, int);
-extern void textsearch_destroy(struct ts_config *conf);
-extern unsigned int textsearch_find_continuous(struct ts_config *,
-					       struct ts_state *,
-					       const void *, unsigned int);
-
-
-#define TS_PRIV_ALIGNTO	8
-#define TS_PRIV_ALIGN(len) (((len) + TS_PRIV_ALIGNTO-1) & ~(TS_PRIV_ALIGNTO-1))
-
-static inline struct ts_config *alloc_ts_config(size_t payload,
-						gfp_t gfp_mask)
-{
-	struct ts_config *conf;
-
-	conf = kzalloc(TS_PRIV_ALIGN(sizeof(*conf)) + payload, gfp_mask);
-	if (conf == NULL)
-		return ERR_PTR(-ENOMEM);
-
-	return conf;
-}
-
-static inline void *ts_config_priv(struct ts_config *conf)
-{
-	return ((u8 *) conf + TS_PRIV_ALIGN(sizeof(struct ts_config)));
-}
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/textsearch_fsm.h b/ANDROID_3.4.5/include/linux/textsearch_fsm.h
deleted file mode 100644
index fdfa078c..00000000
--- a/ANDROID_3.4.5/include/linux/textsearch_fsm.h
+++ /dev/null
@@ -1,48 +0,0 @@
-#ifndef __LINUX_TEXTSEARCH_FSM_H
-#define __LINUX_TEXTSEARCH_FSM_H
-
-#include <linux/types.h>
-
-enum {
-	TS_FSM_SPECIFIC,	/* specific character */
-	TS_FSM_WILDCARD,	/* any character */
-	TS_FSM_DIGIT,		/* isdigit() */
-	TS_FSM_XDIGIT,		/* isxdigit() */
-	TS_FSM_PRINT,		/* isprint() */
-	TS_FSM_ALPHA,		/* isalpha() */
-	TS_FSM_ALNUM,		/* isalnum() */
-	TS_FSM_ASCII,		/* isascii() */
-	TS_FSM_CNTRL,		/* iscntrl() */
-	TS_FSM_GRAPH,		/* isgraph() */
-	TS_FSM_LOWER,		/* islower() */
-	TS_FSM_UPPER,		/* isupper() */
-	TS_FSM_PUNCT,		/* ispunct() */
-	TS_FSM_SPACE,		/* isspace() */
-	__TS_FSM_TYPE_MAX,
-};
-#define TS_FSM_TYPE_MAX (__TS_FSM_TYPE_MAX - 1)
-
-enum {
-	TS_FSM_SINGLE,		/* 1 occurrence */
-	TS_FSM_PERHAPS,		/* 1 or 0 occurrence */
-	TS_FSM_ANY,		/* 0..n occurrences */
-	TS_FSM_MULTI,		/* 1..n occurrences */
-	TS_FSM_HEAD_IGNORE,	/* 0..n ignored occurrences at head */
-	__TS_FSM_RECUR_MAX,
-};
-#define TS_FSM_RECUR_MAX (__TS_FSM_RECUR_MAX - 1)
-
-/**
- * struct ts_fsm_token - state machine token (state)
- * @type: type of token
- * @recur: number of recurrences
- * @value: character value for TS_FSM_SPECIFIC
- */
-struct ts_fsm_token
-{
-	__u16		type;
-	__u8		recur;
-	__u8		value;
-};
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/tfrc.h b/ANDROID_3.4.5/include/linux/tfrc.h
deleted file mode 100644
index 8a8462b4..00000000
--- a/ANDROID_3.4.5/include/linux/tfrc.h
+++ /dev/null
@@ -1,55 +0,0 @@
-#ifndef _LINUX_TFRC_H_
-#define _LINUX_TFRC_H_
-/*
- *  TFRC - Data Structures for the TCP-Friendly Rate Control congestion
- *         control mechanism as specified in RFC 3448.
- *
- *  Copyright (c) 2005 The University of Waikato, Hamilton, New Zealand.
- *  Copyright (c) 2005 Ian McDonald <iam4@cs.waikato.ac.nz>
- *  Copyright (c) 2005 Arnaldo Carvalho de Melo <acme@conectiva.com.br>
- *  Copyright (c) 2003 Nils-Erik Mattsson, Joacim Haggmark, Magnus Erixzon
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- */
-#include <linux/types.h>
-
-/** 	tfrc_rx_info    -    TFRC Receiver Data Structure
- *
- * 	@tfrcrx_x_recv:	receiver estimate of sending rate (3.2.2)
- * 	@tfrcrx_rtt:	round-trip-time (communicated by sender)
- * 	@tfrcrx_p:	current estimate of loss event rate (3.2.2)
- */
-struct tfrc_rx_info {
-  	__u32 tfrcrx_x_recv;
-	__u32 tfrcrx_rtt;
-  	__u32 tfrcrx_p;
-};
-
-/** 	tfrc_tx_info    -    TFRC Sender Data Structure
- *
- * 	@tfrctx_x:	computed transmit rate (4.3 (4))
- * 	@tfrctx_x_recv: receiver estimate of send rate (4.3)
- * 	@tfrctx_x_calc:	return value of throughput equation (3.1)
- * 	@tfrctx_rtt:	(moving average) estimate of RTT (4.3)
- * 	@tfrctx_p:	current loss event rate (5.4)
- * 	@tfrctx_rto:	estimate of RTO, equals 4*RTT (4.3)
- * 	@tfrctx_ipi:	inter-packet interval (4.6)
- *
- *  Note: X and X_recv are both maintained in units of 64 * bytes/second. This
- *        enables a finer resolution of sending rates and avoids problems with
- *        integer arithmetic; u32 is not sufficient as scaling consumes 6 bits.
- */
-struct tfrc_tx_info {
-	__u64 tfrctx_x;
-	__u64 tfrctx_x_recv;
-	__u32 tfrctx_x_calc;
-	__u32 tfrctx_rtt;
-	__u32 tfrctx_p;
-	__u32 tfrctx_rto;
-	__u32 tfrctx_ipi;
-};
-
-#endif /* _LINUX_TFRC_H_ */
diff --git a/ANDROID_3.4.5/include/linux/thermal.h b/ANDROID_3.4.5/include/linux/thermal.h
deleted file mode 100644
index 796f1ff0..00000000
--- a/ANDROID_3.4.5/include/linux/thermal.h
+++ /dev/null
@@ -1,163 +0,0 @@
-/*
- *  thermal.h  ($Revision: 0 $)
- *
- *  Copyright (C) 2008  Intel Corp
- *  Copyright (C) 2008  Zhang Rui <rui.zhang@intel.com>
- *  Copyright (C) 2008  Sujith Thomas <sujith.thomas@intel.com>
- *
- * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; version 2 of the License.
- *
- *  This program is distributed in the hope that it will be useful, but
- *  WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- *  General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
- *
- * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- */
-
-#ifndef __THERMAL_H__
-#define __THERMAL_H__
-
-#include <linux/idr.h>
-#include <linux/device.h>
-#include <linux/workqueue.h>
-
-struct thermal_zone_device;
-struct thermal_cooling_device;
-
-enum thermal_device_mode {
-	THERMAL_DEVICE_DISABLED = 0,
-	THERMAL_DEVICE_ENABLED,
-};
-
-enum thermal_trip_type {
-	THERMAL_TRIP_ACTIVE = 0,
-	THERMAL_TRIP_PASSIVE,
-	THERMAL_TRIP_HOT,
-	THERMAL_TRIP_CRITICAL,
-};
-
-struct thermal_zone_device_ops {
-	int (*bind) (struct thermal_zone_device *,
-		     struct thermal_cooling_device *);
-	int (*unbind) (struct thermal_zone_device *,
-		       struct thermal_cooling_device *);
-	int (*get_temp) (struct thermal_zone_device *, unsigned long *);
-	int (*get_mode) (struct thermal_zone_device *,
-			 enum thermal_device_mode *);
-	int (*set_mode) (struct thermal_zone_device *,
-		enum thermal_device_mode);
-	int (*get_trip_type) (struct thermal_zone_device *, int,
-		enum thermal_trip_type *);
-	int (*get_trip_temp) (struct thermal_zone_device *, int,
-			      unsigned long *);
-	int (*get_crit_temp) (struct thermal_zone_device *, unsigned long *);
-	int (*notify) (struct thermal_zone_device *, int,
-		       enum thermal_trip_type);
-};
-
-struct thermal_cooling_device_ops {
-	int (*get_max_state) (struct thermal_cooling_device *, unsigned long *);
-	int (*get_cur_state) (struct thermal_cooling_device *, unsigned long *);
-	int (*set_cur_state) (struct thermal_cooling_device *, unsigned long);
-};
-
-#define THERMAL_TRIPS_NONE -1
-#define THERMAL_MAX_TRIPS 12
-#define THERMAL_NAME_LENGTH 20
-struct thermal_cooling_device {
-	int id;
-	char type[THERMAL_NAME_LENGTH];
-	struct device device;
-	void *devdata;
-	const struct thermal_cooling_device_ops *ops;
-	struct list_head node;
-};
-
-#define KELVIN_TO_CELSIUS(t)	(long)(((long)t-2732 >= 0) ?	\
-				((long)t-2732+5)/10 : ((long)t-2732-5)/10)
-#define CELSIUS_TO_KELVIN(t)	((t)*10+2732)
-
-struct thermal_zone_device {
-	int id;
-	char type[THERMAL_NAME_LENGTH];
-	struct device device;
-	void *devdata;
-	int trips;
-	int tc1;
-	int tc2;
-	int passive_delay;
-	int polling_delay;
-	int last_temperature;
-	bool passive;
-	unsigned int forced_passive;
-	const struct thermal_zone_device_ops *ops;
-	struct list_head cooling_devices;
-	struct idr idr;
-	struct mutex lock;	/* protect cooling devices list */
-	struct list_head node;
-	struct delayed_work poll_queue;
-};
-/* Adding event notification support elements */
-#define THERMAL_GENL_FAMILY_NAME                "thermal_event"
-#define THERMAL_GENL_VERSION                    0x01
-#define THERMAL_GENL_MCAST_GROUP_NAME           "thermal_mc_group"
-
-enum events {
-	THERMAL_AUX0,
-	THERMAL_AUX1,
-	THERMAL_CRITICAL,
-	THERMAL_DEV_FAULT,
-};
-
-struct thermal_genl_event {
-	u32 orig;
-	enum events event;
-};
-/* attributes of thermal_genl_family */
-enum {
-	THERMAL_GENL_ATTR_UNSPEC,
-	THERMAL_GENL_ATTR_EVENT,
-	__THERMAL_GENL_ATTR_MAX,
-};
-#define THERMAL_GENL_ATTR_MAX (__THERMAL_GENL_ATTR_MAX - 1)
-
-/* commands supported by the thermal_genl_family */
-enum {
-	THERMAL_GENL_CMD_UNSPEC,
-	THERMAL_GENL_CMD_EVENT,
-	__THERMAL_GENL_CMD_MAX,
-};
-#define THERMAL_GENL_CMD_MAX (__THERMAL_GENL_CMD_MAX - 1)
-
-struct thermal_zone_device *thermal_zone_device_register(char *, int, void *,
-		const struct thermal_zone_device_ops *, int tc1, int tc2,
-		int passive_freq, int polling_freq);
-void thermal_zone_device_unregister(struct thermal_zone_device *);
-
-int thermal_zone_bind_cooling_device(struct thermal_zone_device *, int,
-				     struct thermal_cooling_device *);
-int thermal_zone_unbind_cooling_device(struct thermal_zone_device *, int,
-				       struct thermal_cooling_device *);
-void thermal_zone_device_update(struct thermal_zone_device *);
-struct thermal_cooling_device *thermal_cooling_device_register(char *, void *,
-		const struct thermal_cooling_device_ops *);
-void thermal_cooling_device_unregister(struct thermal_cooling_device *);
-
-#ifdef CONFIG_NET
-extern int thermal_generate_netlink_event(u32 orig, enum events event);
-#else
-static inline int thermal_generate_netlink_event(u32 orig, enum events event)
-{
-	return 0;
-}
-#endif
-
-#endif /* __THERMAL_H__ */
diff --git a/ANDROID_3.4.5/include/linux/thread_info.h b/ANDROID_3.4.5/include/linux/thread_info.h
deleted file mode 100644
index 8d03f079..00000000
--- a/ANDROID_3.4.5/include/linux/thread_info.h
+++ /dev/null
@@ -1,128 +0,0 @@
-/* thread_info.h: common low-level thread information accessors
- *
- * Copyright (C) 2002  David Howells (dhowells@redhat.com)
- * - Incorporating suggestions made by Linus Torvalds
- */
-
-#ifndef _LINUX_THREAD_INFO_H
-#define _LINUX_THREAD_INFO_H
-
-#include <linux/types.h>
-
-struct timespec;
-struct compat_timespec;
-
-/*
- * System call restart block.
- */
-struct restart_block {
-	long (*fn)(struct restart_block *);
-	union {
-		/* For futex_wait and futex_wait_requeue_pi */
-		struct {
-			u32 __user *uaddr;
-			u32 val;
-			u32 flags;
-			u32 bitset;
-			u64 time;
-			u32 __user *uaddr2;
-		} futex;
-		/* For nanosleep */
-		struct {
-			clockid_t clockid;
-			struct timespec __user *rmtp;
-#ifdef CONFIG_COMPAT
-			struct compat_timespec __user *compat_rmtp;
-#endif
-			u64 expires;
-		} nanosleep;
-		/* For poll */
-		struct {
-			struct pollfd __user *ufds;
-			int nfds;
-			int has_timeout;
-			unsigned long tv_sec;
-			unsigned long tv_nsec;
-		} poll;
-	};
-};
-
-extern long do_no_restart_syscall(struct restart_block *parm);
-
-#include <linux/bitops.h>
-#include <asm/thread_info.h>
-
-#ifdef __KERNEL__
-
-/*
- * flag set/clear/test wrappers
- * - pass TIF_xxxx constants to these functions
- */
-
-static inline void set_ti_thread_flag(struct thread_info *ti, int flag)
-{
-	set_bit(flag, (unsigned long *)&ti->flags);
-}
-
-static inline void clear_ti_thread_flag(struct thread_info *ti, int flag)
-{
-	clear_bit(flag, (unsigned long *)&ti->flags);
-}
-
-static inline int test_and_set_ti_thread_flag(struct thread_info *ti, int flag)
-{
-	return test_and_set_bit(flag, (unsigned long *)&ti->flags);
-}
-
-static inline int test_and_clear_ti_thread_flag(struct thread_info *ti, int flag)
-{
-	return test_and_clear_bit(flag, (unsigned long *)&ti->flags);
-}
-
-static inline int test_ti_thread_flag(struct thread_info *ti, int flag)
-{
-	return test_bit(flag, (unsigned long *)&ti->flags);
-}
-
-#define set_thread_flag(flag) \
-	set_ti_thread_flag(current_thread_info(), flag)
-#define clear_thread_flag(flag) \
-	clear_ti_thread_flag(current_thread_info(), flag)
-#define test_and_set_thread_flag(flag) \
-	test_and_set_ti_thread_flag(current_thread_info(), flag)
-#define test_and_clear_thread_flag(flag) \
-	test_and_clear_ti_thread_flag(current_thread_info(), flag)
-#define test_thread_flag(flag) \
-	test_ti_thread_flag(current_thread_info(), flag)
-
-#define set_need_resched()	set_thread_flag(TIF_NEED_RESCHED)
-#define clear_need_resched()	clear_thread_flag(TIF_NEED_RESCHED)
-
-#if defined TIF_RESTORE_SIGMASK && !defined HAVE_SET_RESTORE_SIGMASK
-/*
- * An arch can define its own version of set_restore_sigmask() to get the
- * job done however works, with or without TIF_RESTORE_SIGMASK.
- */
-#define HAVE_SET_RESTORE_SIGMASK	1
-
-/**
- * set_restore_sigmask() - make sure saved_sigmask processing gets done
- *
- * This sets TIF_RESTORE_SIGMASK and ensures that the arch signal code
- * will run before returning to user mode, to process the flag.  For
- * all callers, TIF_SIGPENDING is already set or it's no harm to set
- * it.  TIF_RESTORE_SIGMASK need not be in the set of bits that the
- * arch code will notice on return to user mode, in case those bits
- * are scarce.  We set TIF_SIGPENDING here to ensure that the arch
- * signal code always gets run when TIF_RESTORE_SIGMASK is set.
- */
-static inline void set_restore_sigmask(void)
-{
-	set_thread_flag(TIF_RESTORE_SIGMASK);
-	set_thread_flag(TIF_SIGPENDING);
-}
-#endif	/* TIF_RESTORE_SIGMASK && !HAVE_SET_RESTORE_SIGMASK */
-
-#endif	/* __KERNEL__ */
-
-#endif /* _LINUX_THREAD_INFO_H */
diff --git a/ANDROID_3.4.5/include/linux/threads.h b/ANDROID_3.4.5/include/linux/threads.h
deleted file mode 100644
index 383ab959..00000000
--- a/ANDROID_3.4.5/include/linux/threads.h
+++ /dev/null
@@ -1,45 +0,0 @@
-#ifndef _LINUX_THREADS_H
-#define _LINUX_THREADS_H
-
-
-/*
- * The default limit for the nr of threads is now in
- * /proc/sys/kernel/threads-max.
- */
-
-/*
- * Maximum supported processors.  Setting this smaller saves quite a
- * bit of memory.  Use nr_cpu_ids instead of this except for static bitmaps.
- */
-#ifndef CONFIG_NR_CPUS
-/* FIXME: This should be fixed in the arch's Kconfig */
-#define CONFIG_NR_CPUS	1
-#endif
-
-/* Places which use this should consider cpumask_var_t. */
-#define NR_CPUS		CONFIG_NR_CPUS
-
-#define MIN_THREADS_LEFT_FOR_ROOT 4
-
-/*
- * This controls the default maximum pid allocated to a process
- */
-#define PID_MAX_DEFAULT (CONFIG_BASE_SMALL ? 0x1000 : 0x8000)
-
-/*
- * A maximum of 4 million PIDs should be enough for a while.
- * [NOTE: PID/TIDs are limited to 2^29 ~= 500+ million, see futex.h.]
- */
-#define PID_MAX_LIMIT (CONFIG_BASE_SMALL ? PAGE_SIZE * 8 : \
-	(sizeof(long) > 4 ? 4 * 1024 * 1024 : PID_MAX_DEFAULT))
-
-/*
- * Define a minimum number of pids per cpu.  Heuristically based
- * on original pid max of 32k for 32 cpus.  Also, increase the
- * minimum settable value for pid_max on the running system based
- * on similar defaults.  See kernel/pid.c:pidmap_init() for details.
- */
-#define PIDS_PER_CPU_DEFAULT	1024
-#define PIDS_PER_CPU_MIN	8
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/ti_wilink_st.h b/ANDROID_3.4.5/include/linux/ti_wilink_st.h
deleted file mode 100644
index 2ef4385d..00000000
--- a/ANDROID_3.4.5/include/linux/ti_wilink_st.h
+++ /dev/null
@@ -1,448 +0,0 @@
-/*
- *  Shared Transport Header file
- *	To be included by the protocol stack drivers for
- *	Texas Instruments BT,FM and GPS combo chip drivers
- *	and also serves the sub-modules of the shared transport driver.
- *
- *  Copyright (C) 2009-2010 Texas Instruments
- *  Author: Pavan Savoy <pavan_savoy@ti.com>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- */
-
-#ifndef TI_WILINK_ST_H
-#define TI_WILINK_ST_H
-
-/**
- * enum proto-type - The protocol on WiLink chips which share a
- *	common physical interface like UART.
- */
-enum proto_type {
-	ST_BT,
-	ST_FM,
-	ST_GPS,
-	ST_MAX_CHANNELS = 16,
-};
-
-/**
- * struct st_proto_s - Per Protocol structure from BT/FM/GPS to ST
- * @type: type of the protocol being registered among the
- *	available proto_type(BT, FM, GPS the protocol which share TTY).
- * @recv: the receiver callback pointing to a function in the
- *	protocol drivers called by the ST driver upon receiving
- *	relevant data.
- * @match_packet: reserved for future use, to make ST more generic
- * @reg_complete_cb: callback handler pointing to a function in protocol
- *	handler called by ST when the pending registrations are complete.
- *	The registrations are marked pending, in situations when fw
- *	download is in progress.
- * @write: pointer to function in ST provided to protocol drivers from ST,
- *	to be made use when protocol drivers have data to send to TTY.
- * @priv_data: privdate data holder for the protocol drivers, sent
- *	from the protocol drivers during registration, and sent back on
- *	reg_complete_cb and recv.
- * @chnl_id: channel id the protocol driver is interested in, the channel
- *	id is nothing but the 1st byte of the packet in UART frame.
- * @max_frame_size: size of the largest frame the protocol can receive.
- * @hdr_len: length of the header structure of the protocol.
- * @offset_len_in_hdr: this provides the offset of the length field in the
- *	header structure of the protocol header, to assist ST to know
- *	how much to receive, if the data is split across UART frames.
- * @len_size: whether the length field inside the header is 2 bytes
- *	or 1 byte.
- * @reserve: the number of bytes ST needs to reserve in the skb being
- *	prepared for the protocol driver.
- */
-struct st_proto_s {
-	enum proto_type type;
-	long (*recv) (void *, struct sk_buff *);
-	unsigned char (*match_packet) (const unsigned char *data);
-	void (*reg_complete_cb) (void *, char data);
-	long (*write) (struct sk_buff *skb);
-	void *priv_data;
-
-	unsigned char chnl_id;
-	unsigned short max_frame_size;
-	unsigned char hdr_len;
-	unsigned char offset_len_in_hdr;
-	unsigned char len_size;
-	unsigned char reserve;
-};
-
-extern long st_register(struct st_proto_s *);
-extern long st_unregister(struct st_proto_s *);
-
-
-/*
- * header information used by st_core.c
- */
-
-/* states of protocol list */
-#define ST_NOTEMPTY	1
-#define ST_EMPTY	0
-
-/*
- * possible st_states
- */
-#define ST_INITIALIZING		1
-#define ST_REG_IN_PROGRESS	2
-#define ST_REG_PENDING		3
-#define ST_WAITING_FOR_RESP	4
-
-/**
- * struct st_data_s - ST core internal structure
- * @st_state: different states of ST like initializing, registration
- *	in progress, this is mainly used to return relevant err codes
- *	when protocol drivers are registering. It is also used to track
- *	the recv function, as in during fw download only HCI events
- *	can occur , where as during other times other events CH8, CH9
- *	can occur.
- * @tty: tty provided by the TTY core for line disciplines.
- * @tx_skb: If for some reason the tty's write returns lesser bytes written
- *	then to maintain the rest of data to be written on next instance.
- *	This needs to be protected, hence the lock inside wakeup func.
- * @tx_state: if the data is being written onto the TTY and protocol driver
- *	wants to send more, queue up data and mark that there is
- *	more data to send.
- * @list: the list of protocols registered, only MAX can exist, one protocol
- *	can register only once.
- * @rx_state: states to be maintained inside st's tty receive
- * @rx_count: count to be maintained inside st's tty receieve
- * @rx_skb: the skb where all data for a protocol gets accumulated,
- *	since tty might not call receive when a complete event packet
- *	is received, the states, count and the skb needs to be maintained.
- * @rx_chnl: the channel ID for which the data is getting accumalated for.
- * @txq: the list of skbs which needs to be sent onto the TTY.
- * @tx_waitq: if the chip is not in AWAKE state, the skbs needs to be queued
- *	up in here, PM(WAKEUP_IND) data needs to be sent and then the skbs
- *	from waitq can be moved onto the txq.
- *	Needs locking too.
- * @lock: the lock to protect skbs, queues, and ST states.
- * @protos_registered: count of the protocols registered, also when 0 the
- *	chip enable gpio can be toggled, and when it changes to 1 the fw
- *	needs to be downloaded to initialize chip side ST.
- * @ll_state: the various PM states the chip can be, the states are notified
- *	to us, when the chip sends relevant PM packets(SLEEP_IND, WAKE_IND).
- * @kim_data: reference to the parent encapsulating structure.
- *
- */
-struct st_data_s {
-	unsigned long st_state;
-	struct sk_buff *tx_skb;
-#define ST_TX_SENDING	1
-#define ST_TX_WAKEUP	2
-	unsigned long tx_state;
-	struct st_proto_s *list[ST_MAX_CHANNELS];
-	bool is_registered[ST_MAX_CHANNELS];
-	unsigned long rx_state;
-	unsigned long rx_count;
-	struct sk_buff *rx_skb;
-	unsigned char rx_chnl;
-	struct sk_buff_head txq, tx_waitq;
-	spinlock_t lock;
-	unsigned char	protos_registered;
-	unsigned long ll_state;
-	void *kim_data;
-	struct tty_struct *tty;
-};
-
-/*
- * wrapper around tty->ops->write_room to check
- * availability during firmware download
- */
-int st_get_uart_wr_room(struct st_data_s *st_gdata);
-/**
- * st_int_write -
- * point this to tty->driver->write or tty->ops->write
- * depending upon the kernel version
- */
-int st_int_write(struct st_data_s*, const unsigned char*, int);
-
-/**
- * st_write -
- * internal write function, passed onto protocol drivers
- * via the write function ptr of protocol struct
- */
-long st_write(struct sk_buff *);
-
-/* function to be called from ST-LL */
-void st_ll_send_frame(enum proto_type, struct sk_buff *);
-
-/* internal wake up function */
-void st_tx_wakeup(struct st_data_s *st_data);
-
-/* init, exit entry funcs called from KIM */
-int st_core_init(struct st_data_s **);
-void st_core_exit(struct st_data_s *);
-
-/* ask for reference from KIM */
-void st_kim_ref(struct st_data_s **, int);
-
-#define GPS_STUB_TEST
-#ifdef GPS_STUB_TEST
-int gps_chrdrv_stub_write(const unsigned char*, int);
-void gps_chrdrv_stub_init(void);
-#endif
-
-/*
- * header information used by st_kim.c
- */
-
-/* time in msec to wait for
- * line discipline to be installed
- */
-#define LDISC_TIME	1000
-#define CMD_RESP_TIME	800
-#define CMD_WR_TIME	5000
-#define MAKEWORD(a, b)  ((unsigned short)(((unsigned char)(a)) \
-	| ((unsigned short)((unsigned char)(b))) << 8))
-
-#define GPIO_HIGH 1
-#define GPIO_LOW  0
-
-/* the Power-On-Reset logic, requires to attempt
- * to download firmware onto chip more than once
- * since the self-test for chip takes a while
- */
-#define POR_RETRY_COUNT 5
-
-/**
- * struct chip_version - save the chip version
- */
-struct chip_version {
-	unsigned short full;
-	unsigned short chip;
-	unsigned short min_ver;
-	unsigned short maj_ver;
-};
-
-#define UART_DEV_NAME_LEN 32
-/**
- * struct kim_data_s - the KIM internal data, embedded as the
- *	platform's drv data. One for each ST device in the system.
- * @uim_pid: KIM needs to communicate with UIM to request to install
- *	the ldisc by opening UART when protocol drivers register.
- * @kim_pdev: the platform device added in one of the board-XX.c file
- *	in arch/XX/ directory, 1 for each ST device.
- * @kim_rcvd: completion handler to notify when data was received,
- *	mainly used during fw download, which involves multiple send/wait
- *	for each of the HCI-VS commands.
- * @ldisc_installed: completion handler to notify that the UIM accepted
- *	the request to install ldisc, notify from tty_open which suggests
- *	the ldisc was properly installed.
- * @resp_buffer: data buffer for the .bts fw file name.
- * @fw_entry: firmware class struct to request/release the fw.
- * @rx_state: the rx state for kim's receive func during fw download.
- * @rx_count: the rx count for the kim's receive func during fw download.
- * @rx_skb: all of fw data might not come at once, and hence data storage for
- *	whole of the fw response, only HCI_EVENTs and hence diff from ST's
- *	response.
- * @core_data: ST core's data, which mainly is the tty's disc_data
- * @version: chip version available via a sysfs entry.
- *
- */
-struct kim_data_s {
-	long uim_pid;
-	struct platform_device *kim_pdev;
-	struct completion kim_rcvd, ldisc_installed;
-	char resp_buffer[30];
-	const struct firmware *fw_entry;
-	long nshutdown;
-	unsigned long rx_state;
-	unsigned long rx_count;
-	struct sk_buff *rx_skb;
-	struct st_data_s *core_data;
-	struct chip_version version;
-	unsigned char ldisc_install;
-	unsigned char dev_name[UART_DEV_NAME_LEN];
-	unsigned char flow_cntrl;
-	unsigned long baud_rate;
-};
-
-/**
- * functions called when 1 of the protocol drivers gets
- * registered, these need to communicate with UIM to request
- * ldisc installed, read chip_version, download relevant fw
- */
-long st_kim_start(void *);
-long st_kim_stop(void *);
-
-void st_kim_recv(void *, const unsigned char *, long count);
-void st_kim_complete(void *);
-void kim_st_list_protocols(struct st_data_s *, void *);
-
-/*
- * BTS headers
- */
-#define ACTION_SEND_COMMAND     1
-#define ACTION_WAIT_EVENT       2
-#define ACTION_SERIAL           3
-#define ACTION_DELAY            4
-#define ACTION_RUN_SCRIPT       5
-#define ACTION_REMARKS          6
-
-/**
- * struct bts_header - the fw file is NOT binary which can
- *	be sent onto TTY as is. The .bts is more a script
- *	file which has different types of actions.
- *	Each such action needs to be parsed by the KIM and
- *	relevant procedure to be called.
- */
-struct bts_header {
-	u32 magic;
-	u32 version;
-	u8 future[24];
-	u8 actions[0];
-} __attribute__ ((packed));
-
-/**
- * struct bts_action - Each .bts action has its own type of
- *	data.
- */
-struct bts_action {
-	u16 type;
-	u16 size;
-	u8 data[0];
-} __attribute__ ((packed));
-
-struct bts_action_send {
-	u8 data[0];
-} __attribute__ ((packed));
-
-struct bts_action_wait {
-	u32 msec;
-	u32 size;
-	u8 data[0];
-} __attribute__ ((packed));
-
-struct bts_action_delay {
-	u32 msec;
-} __attribute__ ((packed));
-
-struct bts_action_serial {
-	u32 baud;
-	u32 flow_control;
-} __attribute__ ((packed));
-
-/**
- * struct hci_command - the HCI-VS for intrepreting
- *	the change baud rate of host-side UART, which
- *	needs to be ignored, since UIM would do that
- *	when it receives request from KIM for ldisc installation.
- */
-struct hci_command {
-	u8 prefix;
-	u16 opcode;
-	u8 plen;
-	u32 speed;
-} __attribute__ ((packed));
-
-/*
- * header information used by st_ll.c
- */
-
-/* ST LL receiver states */
-#define ST_W4_PACKET_TYPE       0
-#define ST_W4_HEADER		1
-#define ST_W4_DATA		2
-
-/* ST LL state machines */
-#define ST_LL_ASLEEP               0
-#define ST_LL_ASLEEP_TO_AWAKE      1
-#define ST_LL_AWAKE                2
-#define ST_LL_AWAKE_TO_ASLEEP      3
-#define ST_LL_INVALID		   4
-
-/* different PM notifications coming from chip */
-#define LL_SLEEP_IND	0x30
-#define LL_SLEEP_ACK	0x31
-#define LL_WAKE_UP_IND	0x32
-#define LL_WAKE_UP_ACK	0x33
-
-/* initialize and de-init ST LL */
-long st_ll_init(struct st_data_s *);
-long st_ll_deinit(struct st_data_s *);
-
-/**
- * enable/disable ST LL along with KIM start/stop
- * called by ST Core
- */
-void st_ll_enable(struct st_data_s *);
-void st_ll_disable(struct st_data_s *);
-
-/**
- * various funcs used by ST core to set/get the various PM states
- * of the chip.
- */
-unsigned long st_ll_getstate(struct st_data_s *);
-unsigned long st_ll_sleep_state(struct st_data_s *, unsigned char);
-void st_ll_wakeup(struct st_data_s *);
-
-/*
- * header information used by st_core.c for FM and GPS
- * packet parsing, the bluetooth headers are already available
- * at net/bluetooth/
- */
-
-struct fm_event_hdr {
-	u8 plen;
-} __attribute__ ((packed));
-
-#define FM_MAX_FRAME_SIZE 0xFF	/* TODO: */
-#define FM_EVENT_HDR_SIZE 1	/* size of fm_event_hdr */
-#define ST_FM_CH8_PKT 0x8
-
-/* gps stuff */
-struct gps_event_hdr {
-	u8 opcode;
-	u16 plen;
-} __attribute__ ((packed));
-
-/**
- * struct ti_st_plat_data - platform data shared between ST driver and
- *	platform specific board file which adds the ST device.
- * @nshutdown_gpio: Host's GPIO line to which chip's BT_EN is connected.
- * @dev_name: The UART/TTY name to which chip is interfaced. (eg: /dev/ttyS1)
- * @flow_cntrl: Should always be 1, since UART's CTS/RTS is used for PM
- *	purposes.
- * @baud_rate: The baud rate supported by the Host UART controller, this will
- *	be shared across with the chip via a HCI VS command from User-Space Init
- *	Mgr application.
- * @suspend:
- * @resume: legacy PM routines hooked to platform specific board file, so as
- *	to take chip-host interface specific action.
- * @chip_enable:
- * @chip_disable: Platform/Interface specific mux mode setting, GPIO
- *	configuring, Host side PM disabling etc.. can be done here.
- * @chip_asleep:
- * @chip_awake: Chip specific deep sleep states is communicated to Host
- *	specific board-xx.c to take actions such as cut UART clocks when chip
- *	asleep or run host faster when chip awake etc..
- *
- */
-struct ti_st_plat_data {
-	long nshutdown_gpio;
-	unsigned char dev_name[UART_DEV_NAME_LEN]; /* uart name */
-	unsigned char flow_cntrl; /* flow control flag */
-	unsigned long baud_rate;
-	int (*suspend)(struct platform_device *, pm_message_t);
-	int (*resume)(struct platform_device *);
-	int (*chip_enable) (struct kim_data_s *);
-	int (*chip_disable) (struct kim_data_s *);
-	int (*chip_asleep) (struct kim_data_s *);
-	int (*chip_awake) (struct kim_data_s *);
-};
-
-#endif /* TI_WILINK_ST_H */
diff --git a/ANDROID_3.4.5/include/linux/tick.h b/ANDROID_3.4.5/include/linux/tick.h
deleted file mode 100644
index ab8be90b..00000000
--- a/ANDROID_3.4.5/include/linux/tick.h
+++ /dev/null
@@ -1,145 +0,0 @@
-/*  linux/include/linux/tick.h
- *
- *  This file contains the structure definitions for tick related functions
- *
- */
-#ifndef _LINUX_TICK_H
-#define _LINUX_TICK_H
-
-#include <linux/clockchips.h>
-#include <linux/irqflags.h>
-
-#ifdef CONFIG_GENERIC_CLOCKEVENTS
-
-enum tick_device_mode {
-	TICKDEV_MODE_PERIODIC,
-	TICKDEV_MODE_ONESHOT,
-};
-
-struct tick_device {
-	struct clock_event_device *evtdev;
-	enum tick_device_mode mode;
-};
-
-enum tick_nohz_mode {
-	NOHZ_MODE_INACTIVE,
-	NOHZ_MODE_LOWRES,
-	NOHZ_MODE_HIGHRES,
-};
-
-/**
- * struct tick_sched - sched tick emulation and no idle tick control/stats
- * @sched_timer:	hrtimer to schedule the periodic tick in high
- *			resolution mode
- * @idle_tick:		Store the last idle tick expiry time when the tick
- *			timer is modified for idle sleeps. This is necessary
- *			to resume the tick timer operation in the timeline
- *			when the CPU returns from idle
- * @tick_stopped:	Indicator that the idle tick has been stopped
- * @idle_jiffies:	jiffies at the entry to idle for idle time accounting
- * @idle_calls:		Total number of idle calls
- * @idle_sleeps:	Number of idle calls, where the sched tick was stopped
- * @idle_entrytime:	Time when the idle call was entered
- * @idle_waketime:	Time when the idle was interrupted
- * @idle_exittime:	Time when the idle state was left
- * @idle_sleeptime:	Sum of the time slept in idle with sched tick stopped
- * @iowait_sleeptime:	Sum of the time slept in idle with sched tick stopped, with IO outstanding
- * @sleep_length:	Duration of the current idle sleep
- * @do_timer_lst:	CPU was the last one doing do_timer before going idle
- */
-struct tick_sched {
-	struct hrtimer			sched_timer;
-	unsigned long			check_clocks;
-	enum tick_nohz_mode		nohz_mode;
-	ktime_t				idle_tick;
-	int				inidle;
-	int				tick_stopped;
-	unsigned long			idle_jiffies;
-	unsigned long			idle_calls;
-	unsigned long			idle_sleeps;
-	int				idle_active;
-	ktime_t				idle_entrytime;
-	ktime_t				idle_waketime;
-	ktime_t				idle_exittime;
-	ktime_t				idle_sleeptime;
-	ktime_t				iowait_sleeptime;
-	ktime_t				sleep_length;
-	unsigned long			last_jiffies;
-	unsigned long			next_jiffies;
-	ktime_t				idle_expires;
-	int				do_timer_last;
-};
-
-extern void __init tick_init(void);
-extern int tick_is_oneshot_available(void);
-extern struct tick_device *tick_get_device(int cpu);
-
-# ifdef CONFIG_HIGH_RES_TIMERS
-extern int tick_init_highres(void);
-extern int tick_program_event(ktime_t expires, int force);
-extern void tick_setup_sched_timer(void);
-# endif
-
-# if defined CONFIG_NO_HZ || defined CONFIG_HIGH_RES_TIMERS
-extern void tick_cancel_sched_timer(int cpu);
-# else
-static inline void tick_cancel_sched_timer(int cpu) { }
-# endif
-
-# ifdef CONFIG_GENERIC_CLOCKEVENTS_BROADCAST
-extern struct tick_device *tick_get_broadcast_device(void);
-extern struct cpumask *tick_get_broadcast_mask(void);
-
-#  ifdef CONFIG_TICK_ONESHOT
-extern struct cpumask *tick_get_broadcast_oneshot_mask(void);
-#  endif
-
-# endif /* BROADCAST */
-
-# ifdef CONFIG_TICK_ONESHOT
-extern void tick_clock_notify(void);
-extern int tick_check_oneshot_change(int allow_nohz);
-extern struct tick_sched *tick_get_tick_sched(int cpu);
-extern void tick_check_idle(int cpu);
-extern int tick_oneshot_mode_active(void);
-#  ifndef arch_needs_cpu
-#   define arch_needs_cpu(cpu) (0)
-#  endif
-# else
-static inline void tick_clock_notify(void) { }
-static inline int tick_check_oneshot_change(int allow_nohz) { return 0; }
-static inline void tick_check_idle(int cpu) { }
-static inline int tick_oneshot_mode_active(void) { return 0; }
-# endif
-
-#else /* CONFIG_GENERIC_CLOCKEVENTS */
-static inline void tick_init(void) { }
-static inline void tick_cancel_sched_timer(int cpu) { }
-static inline void tick_clock_notify(void) { }
-static inline int tick_check_oneshot_change(int allow_nohz) { return 0; }
-static inline void tick_check_idle(int cpu) { }
-static inline int tick_oneshot_mode_active(void) { return 0; }
-#endif /* !CONFIG_GENERIC_CLOCKEVENTS */
-
-# ifdef CONFIG_NO_HZ
-extern void tick_nohz_idle_enter(void);
-extern void tick_nohz_idle_exit(void);
-extern void tick_nohz_irq_exit(void);
-extern ktime_t tick_nohz_get_sleep_length(void);
-extern u64 get_cpu_idle_time_us(int cpu, u64 *last_update_time);
-extern u64 get_cpu_iowait_time_us(int cpu, u64 *last_update_time);
-# else
-static inline void tick_nohz_idle_enter(void) { }
-static inline void tick_nohz_idle_exit(void) { }
-
-static inline ktime_t tick_nohz_get_sleep_length(void)
-{
-	ktime_t len = { .tv64 = NSEC_PER_SEC/HZ };
-
-	return len;
-}
-static inline u64 get_cpu_idle_time_us(int cpu, u64 *unused) { return -1; }
-static inline u64 get_cpu_iowait_time_us(int cpu, u64 *unused) { return -1; }
-# endif /* !NO_HZ */
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/tifm.h b/ANDROID_3.4.5/include/linux/tifm.h
deleted file mode 100644
index 848c0f39..00000000
--- a/ANDROID_3.4.5/include/linux/tifm.h
+++ /dev/null
@@ -1,164 +0,0 @@
-/*
- *  tifm.h - TI FlashMedia driver
- *
- *  Copyright (C) 2006 Alex Dubov <oakad@yahoo.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#ifndef _TIFM_H
-#define _TIFM_H
-
-#include <linux/spinlock.h>
-#include <linux/interrupt.h>
-#include <linux/delay.h>
-#include <linux/pci.h>
-#include <linux/workqueue.h>
-
-/* Host registers (relative to pci base address): */
-enum {
-	FM_SET_INTERRUPT_ENABLE   = 0x008,
-	FM_CLEAR_INTERRUPT_ENABLE = 0x00c,
-	FM_INTERRUPT_STATUS       = 0x014
-};
-
-/* Socket registers (relative to socket base address): */
-enum {
-	SOCK_CONTROL                   = 0x004,
-	SOCK_PRESENT_STATE             = 0x008,
-	SOCK_DMA_ADDRESS               = 0x00c,
-	SOCK_DMA_CONTROL               = 0x010,
-	SOCK_DMA_FIFO_INT_ENABLE_SET   = 0x014,
-	SOCK_DMA_FIFO_INT_ENABLE_CLEAR = 0x018,
-	SOCK_DMA_FIFO_STATUS           = 0x020,
-	SOCK_FIFO_CONTROL              = 0x024,
-	SOCK_FIFO_PAGE_SIZE            = 0x028,
-	SOCK_MMCSD_COMMAND             = 0x104,
-	SOCK_MMCSD_ARG_LOW             = 0x108,
-	SOCK_MMCSD_ARG_HIGH            = 0x10c,
-	SOCK_MMCSD_CONFIG              = 0x110,
-	SOCK_MMCSD_STATUS              = 0x114,
-	SOCK_MMCSD_INT_ENABLE          = 0x118,
-	SOCK_MMCSD_COMMAND_TO          = 0x11c,
-	SOCK_MMCSD_DATA_TO             = 0x120,
-	SOCK_MMCSD_DATA                = 0x124,
-	SOCK_MMCSD_BLOCK_LEN           = 0x128,
-	SOCK_MMCSD_NUM_BLOCKS          = 0x12c,
-	SOCK_MMCSD_BUFFER_CONFIG       = 0x130,
-	SOCK_MMCSD_SPI_CONFIG          = 0x134,
-	SOCK_MMCSD_SDIO_MODE_CONFIG    = 0x138,
-	SOCK_MMCSD_RESPONSE            = 0x144,
-	SOCK_MMCSD_SDIO_SR             = 0x164,
-	SOCK_MMCSD_SYSTEM_CONTROL      = 0x168,
-	SOCK_MMCSD_SYSTEM_STATUS       = 0x16c,
-	SOCK_MS_COMMAND                = 0x184,
-	SOCK_MS_DATA                   = 0x188,
-	SOCK_MS_STATUS                 = 0x18c,
-	SOCK_MS_SYSTEM                 = 0x190,
-	SOCK_FIFO_ACCESS               = 0x200
-};
-
-#define TIFM_CTRL_LED             0x00000040
-#define TIFM_CTRL_FAST_CLK        0x00000100
-#define TIFM_CTRL_POWER_MASK      0x00000007
-
-#define TIFM_SOCK_STATE_OCCUPIED  0x00000008
-#define TIFM_SOCK_STATE_POWERED   0x00000080
-
-#define TIFM_FIFO_ENABLE          0x00000001
-#define TIFM_FIFO_READY           0x00000001
-#define TIFM_FIFO_MORE            0x00000008
-#define TIFM_FIFO_INT_SETALL      0x0000ffff
-#define TIFM_FIFO_INTMASK         0x00000005
-
-#define TIFM_DMA_RESET            0x00000002
-#define TIFM_DMA_TX               0x00008000
-#define TIFM_DMA_EN               0x00000001
-#define TIFM_DMA_TSIZE            0x0000007f
-
-#define TIFM_TYPE_XD 1
-#define TIFM_TYPE_MS 2
-#define TIFM_TYPE_SD 3
-
-struct tifm_device_id {
-	unsigned char type;
-};
-
-struct tifm_driver;
-struct tifm_dev {
-	char __iomem  *addr;
-	spinlock_t    lock;
-	unsigned char type;
-	unsigned int  socket_id;
-
-	void          (*card_event)(struct tifm_dev *sock);
-	void          (*data_event)(struct tifm_dev *sock);
-
-	struct device dev;
-};
-
-struct tifm_driver {
-	struct tifm_device_id *id_table;
-	int                   (*probe)(struct tifm_dev *dev);
-	void                  (*remove)(struct tifm_dev *dev);
-	int                   (*suspend)(struct tifm_dev *dev,
-					 pm_message_t state);
-	int                   (*resume)(struct tifm_dev *dev);
-
-	struct device_driver  driver;
-};
-
-struct tifm_adapter {
-	char __iomem        *addr;
-	spinlock_t          lock;
-	unsigned int        irq_status;
-	unsigned int        socket_change_set;
-	unsigned int        id;
-	unsigned int        num_sockets;
-	struct completion   *finish_me;
-
-	struct work_struct  media_switcher;
-	struct device	    dev;
-
-	void                (*eject)(struct tifm_adapter *fm,
-				     struct tifm_dev *sock);
-	int                 (*has_ms_pif)(struct tifm_adapter *fm,
-					  struct tifm_dev *sock);
-
-	struct tifm_dev     *sockets[0];
-};
-
-struct tifm_adapter *tifm_alloc_adapter(unsigned int num_sockets,
-					struct device *dev);
-int tifm_add_adapter(struct tifm_adapter *fm);
-void tifm_remove_adapter(struct tifm_adapter *fm);
-void tifm_free_adapter(struct tifm_adapter *fm);
-
-void tifm_free_device(struct device *dev);
-struct tifm_dev *tifm_alloc_device(struct tifm_adapter *fm, unsigned int id,
-				   unsigned char type);
-
-int tifm_register_driver(struct tifm_driver *drv);
-void tifm_unregister_driver(struct tifm_driver *drv);
-void tifm_eject(struct tifm_dev *sock);
-int tifm_has_ms_pif(struct tifm_dev *sock);
-int tifm_map_sg(struct tifm_dev *sock, struct scatterlist *sg, int nents,
-		int direction);
-void tifm_unmap_sg(struct tifm_dev *sock, struct scatterlist *sg, int nents,
-		   int direction);
-void tifm_queue_work(struct work_struct *work);
-
-static inline void *tifm_get_drvdata(struct tifm_dev *dev)
-{
-	return dev_get_drvdata(&dev->dev);
-}
-
-static inline void tifm_set_drvdata(struct tifm_dev *dev, void *data)
-{
-	dev_set_drvdata(&dev->dev, data);
-}
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/timb_dma.h b/ANDROID_3.4.5/include/linux/timb_dma.h
deleted file mode 100644
index bb043e97..00000000
--- a/ANDROID_3.4.5/include/linux/timb_dma.h
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * timb_dma.h timberdale FPGA DMA driver defines
- * Copyright (c) 2010 Intel Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-/* Supports:
- * Timberdale FPGA DMA engine
- */
-
-#ifndef _LINUX_TIMB_DMA_H
-#define _LINUX_TIMB_DMA_H
-
-/**
- * struct timb_dma_platform_data_channel - Description of each individual
- *	DMA channel for the timberdale DMA driver
- * @rx:			true if this channel handles data in the direction to
- *	the CPU.
- * @bytes_per_line:	Number of bytes per line, this is specific for channels
- *	handling video data. For other channels this shall be left to 0.
- * @descriptors:	Number of descriptors to allocate for this channel.
- * @descriptor_elements: Number of elements in each descriptor.
- *
- */
-struct timb_dma_platform_data_channel {
-	bool rx;
-	unsigned int bytes_per_line;
-	unsigned int descriptors;
-	unsigned int descriptor_elements;
-};
-
-/**
- * struct timb_dma_platform_data - Platform data of the timberdale DMA driver
- * @nr_channels:	Number of defined channels in the channels array.
- * @channels:		Definition of the each channel.
- *
- */
-struct timb_dma_platform_data {
-	unsigned nr_channels;
-	struct timb_dma_platform_data_channel channels[32];
-};
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/timb_gpio.h b/ANDROID_3.4.5/include/linux/timb_gpio.h
deleted file mode 100644
index ce456eaa..00000000
--- a/ANDROID_3.4.5/include/linux/timb_gpio.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * timb_gpio.h timberdale FPGA GPIO driver, platform data definition
- * Copyright (c) 2009 Intel Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef _LINUX_TIMB_GPIO_H
-#define _LINUX_TIMB_GPIO_H
-
-/**
- * struct timbgpio_platform_data - Platform data of the Timberdale GPIO driver
- * @gpio_base		The number of the first GPIO pin, set to -1 for
- *			dynamic number allocation.
- * @nr_pins		Number of pins that is supported by the hardware (1-32)
- * @irq_base		If IRQ is supported by the hardware, this is the base
- *			number of IRQ:s. One IRQ per pin will be used. Set to
- *			-1 if IRQ:s is not supported.
- */
-struct timbgpio_platform_data {
-	int gpio_base;
-	int nr_pins;
-	int irq_base;
-};
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/time.h b/ANDROID_3.4.5/include/linux/time.h
deleted file mode 100644
index 33a92ead..00000000
--- a/ANDROID_3.4.5/include/linux/time.h
+++ /dev/null
@@ -1,314 +0,0 @@
-#ifndef _LINUX_TIME_H
-#define _LINUX_TIME_H
-
-#include <linux/types.h>
-
-#ifdef __KERNEL__
-# include <linux/cache.h>
-# include <linux/seqlock.h>
-# include <linux/math64.h>
-#endif
-
-#ifndef _STRUCT_TIMESPEC
-#define _STRUCT_TIMESPEC
-struct timespec {
-	__kernel_time_t	tv_sec;			/* seconds */
-	long		tv_nsec;		/* nanoseconds */
-};
-#endif
-
-struct timeval {
-	__kernel_time_t		tv_sec;		/* seconds */
-	__kernel_suseconds_t	tv_usec;	/* microseconds */
-};
-
-struct timezone {
-	int	tz_minuteswest;	/* minutes west of Greenwich */
-	int	tz_dsttime;	/* type of dst correction */
-};
-
-#ifdef __KERNEL__
-
-extern struct timezone sys_tz;
-
-/* Parameters used to convert the timespec values: */
-#define MSEC_PER_SEC	1000L
-#define USEC_PER_MSEC	1000L
-#define NSEC_PER_USEC	1000L
-#define NSEC_PER_MSEC	1000000L
-#define USEC_PER_SEC	1000000L
-#define NSEC_PER_SEC	1000000000L
-#define FSEC_PER_SEC	1000000000000000LL
-
-#define TIME_T_MAX	(time_t)((1UL << ((sizeof(time_t) << 3) - 1)) - 1)
-
-static inline int timespec_equal(const struct timespec *a,
-                                 const struct timespec *b)
-{
-	return (a->tv_sec == b->tv_sec) && (a->tv_nsec == b->tv_nsec);
-}
-
-/*
- * lhs < rhs:  return <0
- * lhs == rhs: return 0
- * lhs > rhs:  return >0
- */
-static inline int timespec_compare(const struct timespec *lhs, const struct timespec *rhs)
-{
-	if (lhs->tv_sec < rhs->tv_sec)
-		return -1;
-	if (lhs->tv_sec > rhs->tv_sec)
-		return 1;
-	return lhs->tv_nsec - rhs->tv_nsec;
-}
-
-static inline int timeval_compare(const struct timeval *lhs, const struct timeval *rhs)
-{
-	if (lhs->tv_sec < rhs->tv_sec)
-		return -1;
-	if (lhs->tv_sec > rhs->tv_sec)
-		return 1;
-	return lhs->tv_usec - rhs->tv_usec;
-}
-
-extern unsigned long mktime(const unsigned int year, const unsigned int mon,
-			    const unsigned int day, const unsigned int hour,
-			    const unsigned int min, const unsigned int sec);
-
-extern void set_normalized_timespec(struct timespec *ts, time_t sec, s64 nsec);
-
-/*
- * timespec_add_safe assumes both values are positive and checks
- * for overflow. It will return TIME_T_MAX if the reutrn would be
- * smaller then either of the arguments.
- */
-extern struct timespec timespec_add_safe(const struct timespec lhs,
-					 const struct timespec rhs);
-
-
-static inline struct timespec timespec_add(struct timespec lhs,
-						struct timespec rhs)
-{
-	struct timespec ts_delta;
-	set_normalized_timespec(&ts_delta, lhs.tv_sec + rhs.tv_sec,
-				lhs.tv_nsec + rhs.tv_nsec);
-	return ts_delta;
-}
-
-/*
- * sub = lhs - rhs, in normalized form
- */
-static inline struct timespec timespec_sub(struct timespec lhs,
-						struct timespec rhs)
-{
-	struct timespec ts_delta;
-	set_normalized_timespec(&ts_delta, lhs.tv_sec - rhs.tv_sec,
-				lhs.tv_nsec - rhs.tv_nsec);
-	return ts_delta;
-}
-
-/*
- * Returns true if the timespec is norm, false if denorm:
- */
-#define timespec_valid(ts) \
-	(((ts)->tv_sec >= 0) && (((unsigned long) (ts)->tv_nsec) < NSEC_PER_SEC))
-
-extern void read_persistent_clock(struct timespec *ts);
-extern void read_boot_clock(struct timespec *ts);
-extern int update_persistent_clock(struct timespec now);
-void timekeeping_init(void);
-extern int timekeeping_suspended;
-
-unsigned long get_seconds(void);
-struct timespec current_kernel_time(void);
-struct timespec __current_kernel_time(void); /* does not take xtime_lock */
-struct timespec get_monotonic_coarse(void);
-void get_xtime_and_monotonic_and_sleep_offset(struct timespec *xtim,
-				struct timespec *wtom, struct timespec *sleep);
-void timekeeping_inject_sleeptime(struct timespec *delta);
-
-#define CURRENT_TIME		(current_kernel_time())
-#define CURRENT_TIME_SEC	((struct timespec) { get_seconds(), 0 })
-
-/* Some architectures do not supply their own clocksource.
- * This is mainly the case in architectures that get their
- * inter-tick times by reading the counter on their interval
- * timer. Since these timers wrap every tick, they're not really
- * useful as clocksources. Wrapping them to act like one is possible
- * but not very efficient. So we provide a callout these arches
- * can implement for use with the jiffies clocksource to provide
- * finer then tick granular time.
- */
-#ifdef CONFIG_ARCH_USES_GETTIMEOFFSET
-extern u32 arch_gettimeoffset(void);
-#else
-static inline u32 arch_gettimeoffset(void) { return 0; }
-#endif
-
-extern void do_gettimeofday(struct timeval *tv);
-extern int do_settimeofday(const struct timespec *tv);
-extern int do_sys_settimeofday(const struct timespec *tv,
-			       const struct timezone *tz);
-#define do_posix_clock_monotonic_gettime(ts) ktime_get_ts(ts)
-extern long do_utimes(int dfd, const char __user *filename, struct timespec *times, int flags);
-struct itimerval;
-extern int do_setitimer(int which, struct itimerval *value,
-			struct itimerval *ovalue);
-extern unsigned int alarm_setitimer(unsigned int seconds);
-extern int do_getitimer(int which, struct itimerval *value);
-extern void getnstimeofday(struct timespec *tv);
-extern void getrawmonotonic(struct timespec *ts);
-extern void getnstime_raw_and_real(struct timespec *ts_raw,
-		struct timespec *ts_real);
-extern void getboottime(struct timespec *ts);
-extern void monotonic_to_bootbased(struct timespec *ts);
-extern void get_monotonic_boottime(struct timespec *ts);
-
-extern struct timespec timespec_trunc(struct timespec t, unsigned gran);
-extern int timekeeping_valid_for_hres(void);
-extern u64 timekeeping_max_deferment(void);
-extern void timekeeping_leap_insert(int leapsecond);
-extern int timekeeping_inject_offset(struct timespec *ts);
-
-struct tms;
-extern void do_sys_times(struct tms *);
-
-/*
- * Similar to the struct tm in userspace <time.h>, but it needs to be here so
- * that the kernel source is self contained.
- */
-struct tm {
-	/*
-	 * the number of seconds after the minute, normally in the range
-	 * 0 to 59, but can be up to 60 to allow for leap seconds
-	 */
-	int tm_sec;
-	/* the number of minutes after the hour, in the range 0 to 59*/
-	int tm_min;
-	/* the number of hours past midnight, in the range 0 to 23 */
-	int tm_hour;
-	/* the day of the month, in the range 1 to 31 */
-	int tm_mday;
-	/* the number of months since January, in the range 0 to 11 */
-	int tm_mon;
-	/* the number of years since 1900 */
-	long tm_year;
-	/* the number of days since Sunday, in the range 0 to 6 */
-	int tm_wday;
-	/* the number of days since January 1, in the range 0 to 365 */
-	int tm_yday;
-};
-
-void time_to_tm(time_t totalsecs, int offset, struct tm *result);
-
-/**
- * timespec_to_ns - Convert timespec to nanoseconds
- * @ts:		pointer to the timespec variable to be converted
- *
- * Returns the scalar nanosecond representation of the timespec
- * parameter.
- */
-static inline s64 timespec_to_ns(const struct timespec *ts)
-{
-	return ((s64) ts->tv_sec * NSEC_PER_SEC) + ts->tv_nsec;
-}
-
-/**
- * timeval_to_ns - Convert timeval to nanoseconds
- * @ts:		pointer to the timeval variable to be converted
- *
- * Returns the scalar nanosecond representation of the timeval
- * parameter.
- */
-static inline s64 timeval_to_ns(const struct timeval *tv)
-{
-	return ((s64) tv->tv_sec * NSEC_PER_SEC) +
-		tv->tv_usec * NSEC_PER_USEC;
-}
-
-/**
- * ns_to_timespec - Convert nanoseconds to timespec
- * @nsec:	the nanoseconds value to be converted
- *
- * Returns the timespec representation of the nsec parameter.
- */
-extern struct timespec ns_to_timespec(const s64 nsec);
-
-/**
- * ns_to_timeval - Convert nanoseconds to timeval
- * @nsec:	the nanoseconds value to be converted
- *
- * Returns the timeval representation of the nsec parameter.
- */
-extern struct timeval ns_to_timeval(const s64 nsec);
-
-/**
- * timespec_add_ns - Adds nanoseconds to a timespec
- * @a:		pointer to timespec to be incremented
- * @ns:		unsigned nanoseconds value to be added
- *
- * This must always be inlined because its used from the x86-64 vdso,
- * which cannot call other kernel functions.
- */
-static __always_inline void timespec_add_ns(struct timespec *a, u64 ns)
-{
-	a->tv_sec += __iter_div_u64_rem(a->tv_nsec + ns, NSEC_PER_SEC, &ns);
-	a->tv_nsec = ns;
-}
-
-#endif /* __KERNEL__ */
-
-#define NFDBITS			__NFDBITS
-
-#define FD_SETSIZE		__FD_SETSIZE
-#define FD_SET(fd,fdsetp)	__FD_SET(fd,fdsetp)
-#define FD_CLR(fd,fdsetp)	__FD_CLR(fd,fdsetp)
-#define FD_ISSET(fd,fdsetp)	__FD_ISSET(fd,fdsetp)
-#define FD_ZERO(fdsetp)		__FD_ZERO(fdsetp)
-
-/*
- * Names of the interval timers, and structure
- * defining a timer setting:
- */
-#define	ITIMER_REAL		0
-#define	ITIMER_VIRTUAL		1
-#define	ITIMER_PROF		2
-
-struct itimerspec {
-	struct timespec it_interval;	/* timer period */
-	struct timespec it_value;	/* timer expiration */
-};
-
-struct itimerval {
-	struct timeval it_interval;	/* timer interval */
-	struct timeval it_value;	/* current value */
-};
-
-/*
- * The IDs of the various system clocks (for POSIX.1b interval timers):
- */
-#define CLOCK_REALTIME			0
-#define CLOCK_MONOTONIC			1
-#define CLOCK_PROCESS_CPUTIME_ID	2
-#define CLOCK_THREAD_CPUTIME_ID		3
-#define CLOCK_MONOTONIC_RAW		4
-#define CLOCK_REALTIME_COARSE		5
-#define CLOCK_MONOTONIC_COARSE		6
-#define CLOCK_BOOTTIME			7
-#define CLOCK_REALTIME_ALARM		8
-#define CLOCK_BOOTTIME_ALARM		9
-
-/*
- * The IDs of various hardware clocks:
- */
-#define CLOCK_SGI_CYCLE			10
-#define MAX_CLOCKS			16
-#define CLOCKS_MASK			(CLOCK_REALTIME | CLOCK_MONOTONIC)
-#define CLOCKS_MONO			CLOCK_MONOTONIC
-
-/*
- * The various flags for setting POSIX.1b interval timers:
- */
-#define TIMER_ABSTIME			0x01
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/timecompare.h b/ANDROID_3.4.5/include/linux/timecompare.h
deleted file mode 100644
index 546e2234..00000000
--- a/ANDROID_3.4.5/include/linux/timecompare.h
+++ /dev/null
@@ -1,125 +0,0 @@
-/*
- * Utility code which helps transforming between two different time
- * bases, called "source" and "target" time in this code.
- *
- * Source time has to be provided via the timecounter API while target
- * time is accessed via a function callback whose prototype
- * intentionally matches ktime_get() and ktime_get_real(). These
- * interfaces where chosen like this so that the code serves its
- * initial purpose without additional glue code.
- *
- * This purpose is synchronizing a hardware clock in a NIC with system
- * time, in order to implement the Precision Time Protocol (PTP,
- * IEEE1588) with more accurate hardware assisted time stamping.  In
- * that context only synchronization against system time (=
- * ktime_get_real()) is currently needed. But this utility code might
- * become useful in other situations, which is why it was written as
- * general purpose utility code.
- *
- * The source timecounter is assumed to return monotonically
- * increasing time (but this code does its best to compensate if that
- * is not the case) whereas target time may jump.
- *
- * The target time corresponding to a source time is determined by
- * reading target time, reading source time, reading target time
- * again, then assuming that average target time corresponds to source
- * time. In other words, the assumption is that reading the source
- * time is slow and involves equal time for sending the request and
- * receiving the reply, whereas reading target time is assumed to be
- * fast.
- *
- * Copyright (C) 2009 Intel Corporation.
- * Author: Patrick Ohly <patrick.ohly@intel.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. * See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- */
-#ifndef _LINUX_TIMECOMPARE_H
-#define _LINUX_TIMECOMPARE_H
-
-#include <linux/clocksource.h>
-#include <linux/ktime.h>
-
-/**
- * struct timecompare - stores state and configuration for the two clocks
- *
- * Initialize to zero, then set source/target/num_samples.
- *
- * Transformation between source time and target time is done with:
- * target_time = source_time + offset +
- *               (source_time - last_update) * skew /
- *               TIMECOMPARE_SKEW_RESOLUTION
- *
- * @source:          used to get source time stamps via timecounter_read()
- * @target:          function returning target time (for example, ktime_get
- *                   for monotonic time, or ktime_get_real for wall clock)
- * @num_samples:     number of times that source time and target time are to
- *                   be compared when determining their offset
- * @offset:          (target time - source time) at the time of the last update
- * @skew:            average (target time - source time) / delta source time *
- *                   TIMECOMPARE_SKEW_RESOLUTION
- * @last_update:     last source time stamp when time offset was measured
- */
-struct timecompare {
-	struct timecounter *source;
-	ktime_t (*target)(void);
-	int num_samples;
-
-	s64 offset;
-	s64 skew;
-	u64 last_update;
-};
-
-/**
- * timecompare_transform - transform source time stamp into target time base
- * @sync:            context for time sync
- * @source_tstamp:   the result of timecounter_read() or
- *                   timecounter_cyc2time()
- */
-extern ktime_t timecompare_transform(struct timecompare *sync,
-				     u64 source_tstamp);
-
-/**
- * timecompare_offset - measure current (target time - source time) offset
- * @sync:            context for time sync
- * @offset:          average offset during sample period returned here
- * @source_tstamp:   average source time during sample period returned here
- *
- * Returns number of samples used. Might be zero (= no result) in the
- * unlikely case that target time was monotonically decreasing for all
- * samples (= broken).
- */
-extern int timecompare_offset(struct timecompare *sync,
-			      s64 *offset,
-			      u64 *source_tstamp);
-
-extern void __timecompare_update(struct timecompare *sync,
-				 u64 source_tstamp);
-
-/**
- * timecompare_update - update offset and skew by measuring current offset
- * @sync:            context for time sync
- * @source_tstamp:   the result of timecounter_read() or
- *                   timecounter_cyc2time(), pass zero to force update
- *
- * Updates are only done at most once per second.
- */
-static inline void timecompare_update(struct timecompare *sync,
-				      u64 source_tstamp)
-{
-	if (!source_tstamp ||
-	    (s64)(source_tstamp - sync->last_update) >= NSEC_PER_SEC)
-		__timecompare_update(sync, source_tstamp);
-}
-
-#endif /* _LINUX_TIMECOMPARE_H */
diff --git a/ANDROID_3.4.5/include/linux/timer.h b/ANDROID_3.4.5/include/linux/timer.h
deleted file mode 100644
index 6abd9138..00000000
--- a/ANDROID_3.4.5/include/linux/timer.h
+++ /dev/null
@@ -1,302 +0,0 @@
-#ifndef _LINUX_TIMER_H
-#define _LINUX_TIMER_H
-
-#include <linux/list.h>
-#include <linux/ktime.h>
-#include <linux/stddef.h>
-#include <linux/debugobjects.h>
-#include <linux/stringify.h>
-
-struct tvec_base;
-
-struct timer_list {
-	/*
-	 * All fields that change during normal runtime grouped to the
-	 * same cacheline
-	 */
-	struct list_head entry;
-	unsigned long expires;
-	struct tvec_base *base;
-
-	void (*function)(unsigned long);
-	unsigned long data;
-
-	int slack;
-
-#ifdef CONFIG_TIMER_STATS
-	int start_pid;
-	void *start_site;
-	char start_comm[16];
-#endif
-#ifdef CONFIG_LOCKDEP
-	struct lockdep_map lockdep_map;
-#endif
-};
-
-extern struct tvec_base boot_tvec_bases;
-
-#ifdef CONFIG_LOCKDEP
-/*
- * NB: because we have to copy the lockdep_map, setting the lockdep_map key
- * (second argument) here is required, otherwise it could be initialised to
- * the copy of the lockdep_map later! We use the pointer to and the string
- * "<file>:<line>" as the key resp. the name of the lockdep_map.
- */
-#define __TIMER_LOCKDEP_MAP_INITIALIZER(_kn)				\
-	.lockdep_map = STATIC_LOCKDEP_MAP_INIT(_kn, &_kn),
-#else
-#define __TIMER_LOCKDEP_MAP_INITIALIZER(_kn)
-#endif
-
-/*
- * Note that all tvec_bases are 2 byte aligned and lower bit of
- * base in timer_list is guaranteed to be zero. Use the LSB to
- * indicate whether the timer is deferrable.
- *
- * A deferrable timer will work normally when the system is busy, but
- * will not cause a CPU to come out of idle just to service it; instead,
- * the timer will be serviced when the CPU eventually wakes up with a
- * subsequent non-deferrable timer.
- */
-#define TBASE_DEFERRABLE_FLAG		(0x1)
-
-#define TIMER_INITIALIZER(_function, _expires, _data) {		\
-		.entry = { .prev = TIMER_ENTRY_STATIC },	\
-		.function = (_function),			\
-		.expires = (_expires),				\
-		.data = (_data),				\
-		.base = &boot_tvec_bases,			\
-		.slack = -1,					\
-		__TIMER_LOCKDEP_MAP_INITIALIZER(		\
-			__FILE__ ":" __stringify(__LINE__))	\
-	}
-
-#define TBASE_MAKE_DEFERRED(ptr) ((struct tvec_base *)		\
-		  ((unsigned char *)(ptr) + TBASE_DEFERRABLE_FLAG))
-
-#define TIMER_DEFERRED_INITIALIZER(_function, _expires, _data) {\
-		.entry = { .prev = TIMER_ENTRY_STATIC },	\
-		.function = (_function),			\
-		.expires = (_expires),				\
-		.data = (_data),				\
-		.base = TBASE_MAKE_DEFERRED(&boot_tvec_bases),	\
-		__TIMER_LOCKDEP_MAP_INITIALIZER(		\
-			__FILE__ ":" __stringify(__LINE__))	\
-	}
-
-#define DEFINE_TIMER(_name, _function, _expires, _data)		\
-	struct timer_list _name =				\
-		TIMER_INITIALIZER(_function, _expires, _data)
-
-void init_timer_key(struct timer_list *timer,
-		    const char *name,
-		    struct lock_class_key *key);
-void init_timer_deferrable_key(struct timer_list *timer,
-			       const char *name,
-			       struct lock_class_key *key);
-
-#ifdef CONFIG_LOCKDEP
-#define init_timer(timer)						\
-	do {								\
-		static struct lock_class_key __key;			\
-		init_timer_key((timer), #timer, &__key);		\
-	} while (0)
-
-#define init_timer_deferrable(timer)					\
-	do {								\
-		static struct lock_class_key __key;			\
-		init_timer_deferrable_key((timer), #timer, &__key);	\
-	} while (0)
-
-#define init_timer_on_stack(timer)					\
-	do {								\
-		static struct lock_class_key __key;			\
-		init_timer_on_stack_key((timer), #timer, &__key);	\
-	} while (0)
-
-#define setup_timer(timer, fn, data)					\
-	do {								\
-		static struct lock_class_key __key;			\
-		setup_timer_key((timer), #timer, &__key, (fn), (data));\
-	} while (0)
-
-#define setup_timer_on_stack(timer, fn, data)				\
-	do {								\
-		static struct lock_class_key __key;			\
-		setup_timer_on_stack_key((timer), #timer, &__key,	\
-					 (fn), (data));			\
-	} while (0)
-#define setup_deferrable_timer_on_stack(timer, fn, data)		\
-	do {								\
-		static struct lock_class_key __key;			\
-		setup_deferrable_timer_on_stack_key((timer), #timer,	\
-						    &__key, (fn),	\
-						    (data));		\
-	} while (0)
-#else
-#define init_timer(timer)\
-	init_timer_key((timer), NULL, NULL)
-#define init_timer_deferrable(timer)\
-	init_timer_deferrable_key((timer), NULL, NULL)
-#define init_timer_on_stack(timer)\
-	init_timer_on_stack_key((timer), NULL, NULL)
-#define setup_timer(timer, fn, data)\
-	setup_timer_key((timer), NULL, NULL, (fn), (data))
-#define setup_timer_on_stack(timer, fn, data)\
-	setup_timer_on_stack_key((timer), NULL, NULL, (fn), (data))
-#define setup_deferrable_timer_on_stack(timer, fn, data)\
-	setup_deferrable_timer_on_stack_key((timer), NULL, NULL, (fn), (data))
-#endif
-
-#ifdef CONFIG_DEBUG_OBJECTS_TIMERS
-extern void init_timer_on_stack_key(struct timer_list *timer,
-				    const char *name,
-				    struct lock_class_key *key);
-extern void destroy_timer_on_stack(struct timer_list *timer);
-#else
-static inline void destroy_timer_on_stack(struct timer_list *timer) { }
-static inline void init_timer_on_stack_key(struct timer_list *timer,
-					   const char *name,
-					   struct lock_class_key *key)
-{
-	init_timer_key(timer, name, key);
-}
-#endif
-
-static inline void setup_timer_key(struct timer_list * timer,
-				const char *name,
-				struct lock_class_key *key,
-				void (*function)(unsigned long),
-				unsigned long data)
-{
-	timer->function = function;
-	timer->data = data;
-	init_timer_key(timer, name, key);
-}
-
-static inline void setup_timer_on_stack_key(struct timer_list *timer,
-					const char *name,
-					struct lock_class_key *key,
-					void (*function)(unsigned long),
-					unsigned long data)
-{
-	timer->function = function;
-	timer->data = data;
-	init_timer_on_stack_key(timer, name, key);
-}
-
-extern void setup_deferrable_timer_on_stack_key(struct timer_list *timer,
-						const char *name,
-						struct lock_class_key *key,
-						void (*function)(unsigned long),
-						unsigned long data);
-
-/**
- * timer_pending - is a timer pending?
- * @timer: the timer in question
- *
- * timer_pending will tell whether a given timer is currently pending,
- * or not. Callers must ensure serialization wrt. other operations done
- * to this timer, eg. interrupt contexts, or other CPUs on SMP.
- *
- * return value: 1 if the timer is pending, 0 if not.
- */
-static inline int timer_pending(const struct timer_list * timer)
-{
-	return timer->entry.next != NULL;
-}
-
-extern void add_timer_on(struct timer_list *timer, int cpu);
-extern int del_timer(struct timer_list * timer);
-extern int mod_timer(struct timer_list *timer, unsigned long expires);
-extern int mod_timer_pending(struct timer_list *timer, unsigned long expires);
-extern int mod_timer_pinned(struct timer_list *timer, unsigned long expires);
-
-extern void set_timer_slack(struct timer_list *time, int slack_hz);
-
-#define TIMER_NOT_PINNED	0
-#define TIMER_PINNED		1
-/*
- * The jiffies value which is added to now, when there is no timer
- * in the timer wheel:
- */
-#define NEXT_TIMER_MAX_DELTA	((1UL << 30) - 1)
-
-/*
- * Return when the next timer-wheel timeout occurs (in absolute jiffies),
- * locks the timer base and does the comparison against the given
- * jiffie.
- */
-extern unsigned long get_next_timer_interrupt(unsigned long now);
-
-/*
- * Timer-statistics info:
- */
-#ifdef CONFIG_TIMER_STATS
-
-extern int timer_stats_active;
-
-#define TIMER_STATS_FLAG_DEFERRABLE	0x1
-
-extern void init_timer_stats(void);
-
-extern void timer_stats_update_stats(void *timer, pid_t pid, void *startf,
-				     void *timerf, char *comm,
-				     unsigned int timer_flag);
-
-extern void __timer_stats_timer_set_start_info(struct timer_list *timer,
-					       void *addr);
-
-static inline void timer_stats_timer_set_start_info(struct timer_list *timer)
-{
-	if (likely(!timer_stats_active))
-		return;
-	__timer_stats_timer_set_start_info(timer, __builtin_return_address(0));
-}
-
-static inline void timer_stats_timer_clear_start_info(struct timer_list *timer)
-{
-	timer->start_site = NULL;
-}
-#else
-static inline void init_timer_stats(void)
-{
-}
-
-static inline void timer_stats_timer_set_start_info(struct timer_list *timer)
-{
-}
-
-static inline void timer_stats_timer_clear_start_info(struct timer_list *timer)
-{
-}
-#endif
-
-extern void add_timer(struct timer_list *timer);
-
-extern int try_to_del_timer_sync(struct timer_list *timer);
-
-#ifdef CONFIG_SMP
-  extern int del_timer_sync(struct timer_list *timer);
-#else
-# define del_timer_sync(t)		del_timer(t)
-#endif
-
-#define del_singleshot_timer_sync(t) del_timer_sync(t)
-
-extern void init_timers(void);
-extern void run_local_timers(void);
-struct hrtimer;
-extern enum hrtimer_restart it_real_fn(struct hrtimer *);
-
-unsigned long __round_jiffies(unsigned long j, int cpu);
-unsigned long __round_jiffies_relative(unsigned long j, int cpu);
-unsigned long round_jiffies(unsigned long j);
-unsigned long round_jiffies_relative(unsigned long j);
-
-unsigned long __round_jiffies_up(unsigned long j, int cpu);
-unsigned long __round_jiffies_up_relative(unsigned long j, int cpu);
-unsigned long round_jiffies_up(unsigned long j);
-unsigned long round_jiffies_up_relative(unsigned long j);
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/timerfd.h b/ANDROID_3.4.5/include/linux/timerfd.h
deleted file mode 100644
index d3b57fa1..00000000
--- a/ANDROID_3.4.5/include/linux/timerfd.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- *  include/linux/timerfd.h
- *
- *  Copyright (C) 2007  Davide Libenzi <davidel@xmailserver.org>
- *
- */
-
-#ifndef _LINUX_TIMERFD_H
-#define _LINUX_TIMERFD_H
-
-/* For O_CLOEXEC and O_NONBLOCK */
-#include <linux/fcntl.h>
-
-/*
- * CAREFUL: Check include/asm-generic/fcntl.h when defining
- * new flags, since they might collide with O_* ones. We want
- * to re-use O_* flags that couldn't possibly have a meaning
- * from eventfd, in order to leave a free define-space for
- * shared O_* flags.
- */
-#define TFD_TIMER_ABSTIME (1 << 0)
-#define TFD_TIMER_CANCEL_ON_SET (1 << 1)
-#define TFD_CLOEXEC O_CLOEXEC
-#define TFD_NONBLOCK O_NONBLOCK
-
-#define TFD_SHARED_FCNTL_FLAGS (TFD_CLOEXEC | TFD_NONBLOCK)
-/* Flags for timerfd_create.  */
-#define TFD_CREATE_FLAGS TFD_SHARED_FCNTL_FLAGS
-/* Flags for timerfd_settime.  */
-#define TFD_SETTIME_FLAGS (TFD_TIMER_ABSTIME | TFD_TIMER_CANCEL_ON_SET)
-
-#endif /* _LINUX_TIMERFD_H */
diff --git a/ANDROID_3.4.5/include/linux/timeriomem-rng.h b/ANDROID_3.4.5/include/linux/timeriomem-rng.h
deleted file mode 100644
index 3e08a1c8..00000000
--- a/ANDROID_3.4.5/include/linux/timeriomem-rng.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * linux/include/linux/timeriomem-rng.h
- *
- * Copyright (c) 2009 Alexander Clouter <alex@digriz.org.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/completion.h>
-
-struct timeriomem_rng_data {
-	struct completion	completion;
-	unsigned int		present:1;
-
-	void __iomem		*address;
-
-	/* measures in usecs */
-	unsigned int		period;
-};
diff --git a/ANDROID_3.4.5/include/linux/timerqueue.h b/ANDROID_3.4.5/include/linux/timerqueue.h
deleted file mode 100644
index 50887274..00000000
--- a/ANDROID_3.4.5/include/linux/timerqueue.h
+++ /dev/null
@@ -1,50 +0,0 @@
-#ifndef _LINUX_TIMERQUEUE_H
-#define _LINUX_TIMERQUEUE_H
-
-#include <linux/rbtree.h>
-#include <linux/ktime.h>
-
-
-struct timerqueue_node {
-	struct rb_node node;
-	ktime_t expires;
-};
-
-struct timerqueue_head {
-	struct rb_root head;
-	struct timerqueue_node *next;
-};
-
-
-extern void timerqueue_add(struct timerqueue_head *head,
-				struct timerqueue_node *node);
-extern void timerqueue_del(struct timerqueue_head *head,
-				struct timerqueue_node *node);
-extern struct timerqueue_node *timerqueue_iterate_next(
-						struct timerqueue_node *node);
-
-/**
- * timerqueue_getnext - Returns the timer with the earliest expiration time
- *
- * @head: head of timerqueue
- *
- * Returns a pointer to the timer node that has the
- * earliest expiration time.
- */
-static inline
-struct timerqueue_node *timerqueue_getnext(struct timerqueue_head *head)
-{
-	return head->next;
-}
-
-static inline void timerqueue_init(struct timerqueue_node *node)
-{
-	rb_init_node(&node->node);
-}
-
-static inline void timerqueue_init_head(struct timerqueue_head *head)
-{
-	head->head = RB_ROOT;
-	head->next = NULL;
-}
-#endif /* _LINUX_TIMERQUEUE_H */
diff --git a/ANDROID_3.4.5/include/linux/times.h b/ANDROID_3.4.5/include/linux/times.h
deleted file mode 100644
index 87b62615..00000000
--- a/ANDROID_3.4.5/include/linux/times.h
+++ /dev/null
@@ -1,13 +0,0 @@
-#ifndef _LINUX_TIMES_H
-#define _LINUX_TIMES_H
-
-#include <linux/types.h>
-
-struct tms {
-	__kernel_clock_t tms_utime;
-	__kernel_clock_t tms_stime;
-	__kernel_clock_t tms_cutime;
-	__kernel_clock_t tms_cstime;
-};
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/timex.h b/ANDROID_3.4.5/include/linux/timex.h
deleted file mode 100644
index 99bc88b1..00000000
--- a/ANDROID_3.4.5/include/linux/timex.h
+++ /dev/null
@@ -1,266 +0,0 @@
-/*****************************************************************************
- *                                                                           *
- * Copyright (c) David L. Mills 1993                                         *
- *                                                                           *
- * Permission to use, copy, modify, and distribute this software and its     *
- * documentation for any purpose and without fee is hereby granted, provided *
- * that the above copyright notice appears in all copies and that both the   *
- * copyright notice and this permission notice appear in supporting          *
- * documentation, and that the name University of Delaware not be used in    *
- * advertising or publicity pertaining to distribution of the software       *
- * without specific, written prior permission.  The University of Delaware   *
- * makes no representations about the suitability this software for any      *
- * purpose.  It is provided "as is" without express or implied warranty.     *
- *                                                                           *
- *****************************************************************************/
-
-/*
- * Modification history timex.h
- *
- * 29 Dec 97	Russell King
- *	Moved CLOCK_TICK_RATE, CLOCK_TICK_FACTOR and FINETUNE to asm/timex.h
- *	for ARM machines
- *
- *  9 Jan 97    Adrian Sun
- *      Shifted LATCH define to allow access to alpha machines.
- *
- * 26 Sep 94	David L. Mills
- *	Added defines for hybrid phase/frequency-lock loop.
- *
- * 19 Mar 94	David L. Mills
- *	Moved defines from kernel routines to header file and added new
- *	defines for PPS phase-lock loop.
- *
- * 20 Feb 94	David L. Mills
- *	Revised status codes and structures for external clock and PPS
- *	signal discipline.
- *
- * 28 Nov 93	David L. Mills
- *	Adjusted parameters to improve stability and increase poll
- *	interval.
- *
- * 17 Sep 93    David L. Mills
- *      Created file $NTP/include/sys/timex.h
- * 07 Oct 93    Torsten Duwe
- *      Derived linux/timex.h
- * 1995-08-13    Torsten Duwe
- *      kernel PLL updated to 1994-12-13 specs (rfc-1589)
- * 1997-08-30    Ulrich Windl
- *      Added new constant NTP_PHASE_LIMIT
- * 2004-08-12    Christoph Lameter
- *      Reworked time interpolation logic
- */
-#ifndef _LINUX_TIMEX_H
-#define _LINUX_TIMEX_H
-
-#include <linux/time.h>
-
-#define NTP_API		4	/* NTP API version */
-
-/*
- * syscall interface - used (mainly by NTP daemon)
- * to discipline kernel clock oscillator
- */
-struct timex {
-	unsigned int modes;	/* mode selector */
-	long offset;		/* time offset (usec) */
-	long freq;		/* frequency offset (scaled ppm) */
-	long maxerror;		/* maximum error (usec) */
-	long esterror;		/* estimated error (usec) */
-	int status;		/* clock command/status */
-	long constant;		/* pll time constant */
-	long precision;		/* clock precision (usec) (read only) */
-	long tolerance;		/* clock frequency tolerance (ppm)
-				 * (read only)
-				 */
-	struct timeval time;	/* (read only, except for ADJ_SETOFFSET) */
-	long tick;		/* (modified) usecs between clock ticks */
-
-	long ppsfreq;           /* pps frequency (scaled ppm) (ro) */
-	long jitter;            /* pps jitter (us) (ro) */
-	int shift;              /* interval duration (s) (shift) (ro) */
-	long stabil;            /* pps stability (scaled ppm) (ro) */
-	long jitcnt;            /* jitter limit exceeded (ro) */
-	long calcnt;            /* calibration intervals (ro) */
-	long errcnt;            /* calibration errors (ro) */
-	long stbcnt;            /* stability limit exceeded (ro) */
-
-	int tai;		/* TAI offset (ro) */
-
-	int  :32; int  :32; int  :32; int  :32;
-	int  :32; int  :32; int  :32; int  :32;
-	int  :32; int  :32; int  :32;
-};
-
-/*
- * Mode codes (timex.mode)
- */
-#define ADJ_OFFSET		0x0001	/* time offset */
-#define ADJ_FREQUENCY		0x0002	/* frequency offset */
-#define ADJ_MAXERROR		0x0004	/* maximum time error */
-#define ADJ_ESTERROR		0x0008	/* estimated time error */
-#define ADJ_STATUS		0x0010	/* clock status */
-#define ADJ_TIMECONST		0x0020	/* pll time constant */
-#define ADJ_TAI			0x0080	/* set TAI offset */
-#define ADJ_SETOFFSET		0x0100  /* add 'time' to current time */
-#define ADJ_MICRO		0x1000	/* select microsecond resolution */
-#define ADJ_NANO		0x2000	/* select nanosecond resolution */
-#define ADJ_TICK		0x4000	/* tick value */
-
-#ifdef __KERNEL__
-#define ADJ_ADJTIME		0x8000	/* switch between adjtime/adjtimex modes */
-#define ADJ_OFFSET_SINGLESHOT	0x0001	/* old-fashioned adjtime */
-#define ADJ_OFFSET_READONLY	0x2000	/* read-only adjtime */
-#else
-#define ADJ_OFFSET_SINGLESHOT	0x8001	/* old-fashioned adjtime */
-#define ADJ_OFFSET_SS_READ	0xa001	/* read-only adjtime */
-#endif
-
-/* NTP userland likes the MOD_ prefix better */
-#define MOD_OFFSET	ADJ_OFFSET
-#define MOD_FREQUENCY	ADJ_FREQUENCY
-#define MOD_MAXERROR	ADJ_MAXERROR
-#define MOD_ESTERROR	ADJ_ESTERROR
-#define MOD_STATUS	ADJ_STATUS
-#define MOD_TIMECONST	ADJ_TIMECONST
-#define MOD_TAI	ADJ_TAI
-#define MOD_MICRO	ADJ_MICRO
-#define MOD_NANO	ADJ_NANO
-
-
-/*
- * Status codes (timex.status)
- */
-#define STA_PLL		0x0001	/* enable PLL updates (rw) */
-#define STA_PPSFREQ	0x0002	/* enable PPS freq discipline (rw) */
-#define STA_PPSTIME	0x0004	/* enable PPS time discipline (rw) */
-#define STA_FLL		0x0008	/* select frequency-lock mode (rw) */
-
-#define STA_INS		0x0010	/* insert leap (rw) */
-#define STA_DEL		0x0020	/* delete leap (rw) */
-#define STA_UNSYNC	0x0040	/* clock unsynchronized (rw) */
-#define STA_FREQHOLD	0x0080	/* hold frequency (rw) */
-
-#define STA_PPSSIGNAL	0x0100	/* PPS signal present (ro) */
-#define STA_PPSJITTER	0x0200	/* PPS signal jitter exceeded (ro) */
-#define STA_PPSWANDER	0x0400	/* PPS signal wander exceeded (ro) */
-#define STA_PPSERROR	0x0800	/* PPS signal calibration error (ro) */
-
-#define STA_CLOCKERR	0x1000	/* clock hardware fault (ro) */
-#define STA_NANO	0x2000	/* resolution (0 = us, 1 = ns) (ro) */
-#define STA_MODE	0x4000	/* mode (0 = PLL, 1 = FLL) (ro) */
-#define STA_CLK		0x8000	/* clock source (0 = A, 1 = B) (ro) */
-
-/* read-only bits */
-#define STA_RONLY (STA_PPSSIGNAL | STA_PPSJITTER | STA_PPSWANDER | \
-	STA_PPSERROR | STA_CLOCKERR | STA_NANO | STA_MODE | STA_CLK)
-
-/*
- * Clock states (time_state)
- */
-#define TIME_OK		0	/* clock synchronized, no leap second */
-#define TIME_INS	1	/* insert leap second */
-#define TIME_DEL	2	/* delete leap second */
-#define TIME_OOP	3	/* leap second in progress */
-#define TIME_WAIT	4	/* leap second has occurred */
-#define TIME_ERROR	5	/* clock not synchronized */
-#define TIME_BAD	TIME_ERROR /* bw compat */
-
-#ifdef __KERNEL__
-#include <linux/compiler.h>
-#include <linux/types.h>
-#include <linux/param.h>
-
-#include <asm/timex.h>
-
-/*
- * SHIFT_PLL is used as a dampening factor to define how much we
- * adjust the frequency correction for a given offset in PLL mode.
- * It also used in dampening the offset correction, to define how
- * much of the current value in time_offset we correct for each
- * second. Changing this value changes the stiffness of the ntp
- * adjustment code. A lower value makes it more flexible, reducing
- * NTP convergence time. A higher value makes it stiffer, increasing
- * convergence time, but making the clock more stable.
- *
- * In David Mills' nanokernel reference implementation SHIFT_PLL is 4.
- * However this seems to increase convergence time much too long.
- *
- * https://lists.ntp.org/pipermail/hackers/2008-January/003487.html
- *
- * In the above mailing list discussion, it seems the value of 4
- * was appropriate for other Unix systems with HZ=100, and that
- * SHIFT_PLL should be decreased as HZ increases. However, Linux's
- * clock steering implementation is HZ independent.
- *
- * Through experimentation, a SHIFT_PLL value of 2 was found to allow
- * for fast convergence (very similar to the NTPv3 code used prior to
- * v2.6.19), with good clock stability.
- *
- *
- * SHIFT_FLL is used as a dampening factor to define how much we
- * adjust the frequency correction for a given offset in FLL mode.
- * In David Mills' nanokernel reference implementation SHIFT_FLL is 2.
- *
- * MAXTC establishes the maximum time constant of the PLL.
- */
-#define SHIFT_PLL	2	/* PLL frequency factor (shift) */
-#define SHIFT_FLL	2	/* FLL frequency factor (shift) */
-#define MAXTC		10	/* maximum time constant (shift) */
-
-/*
- * SHIFT_USEC defines the scaling (shift) of the time_freq and
- * time_tolerance variables, which represent the current frequency
- * offset and maximum frequency tolerance.
- */
-#define SHIFT_USEC 16		/* frequency offset scale (shift) */
-#define PPM_SCALE ((s64)NSEC_PER_USEC << (NTP_SCALE_SHIFT - SHIFT_USEC))
-#define PPM_SCALE_INV_SHIFT 19
-#define PPM_SCALE_INV ((1LL << (PPM_SCALE_INV_SHIFT + NTP_SCALE_SHIFT)) / \
-		       PPM_SCALE + 1)
-
-#define MAXPHASE 500000000L	/* max phase error (ns) */
-#define MAXFREQ 500000		/* max frequency error (ns/s) */
-#define MAXFREQ_SCALED ((s64)MAXFREQ << NTP_SCALE_SHIFT)
-#define MINSEC 256		/* min interval between updates (s) */
-#define MAXSEC 2048		/* max interval between updates (s) */
-#define NTP_PHASE_LIMIT ((MAXPHASE / NSEC_PER_USEC) << 5) /* beyond max. dispersion */
-
-/*
- * kernel variables
- * Note: maximum error = NTP synch distance = dispersion + delay / 2;
- * estimated error = NTP dispersion.
- */
-extern unsigned long tick_usec;		/* USER_HZ period (usec) */
-extern unsigned long tick_nsec;		/* ACTHZ          period (nsec) */
-
-extern void ntp_init(void);
-extern void ntp_clear(void);
-
-/* Required to safely shift negative values */
-#define shift_right(x, s) ({	\
-	__typeof__(x) __x = (x);	\
-	__typeof__(s) __s = (s);	\
-	__x < 0 ? -(-__x >> __s) : __x >> __s;	\
-})
-
-#define NTP_SCALE_SHIFT		32
-
-#define NTP_INTERVAL_FREQ  (HZ)
-#define NTP_INTERVAL_LENGTH (NSEC_PER_SEC/NTP_INTERVAL_FREQ)
-
-/* Returns how long ticks are at present, in ns / 2^NTP_SCALE_SHIFT. */
-extern u64 ntp_tick_length(void);
-
-extern int second_overflow(unsigned long secs);
-extern int do_adjtimex(struct timex *);
-extern void hardpps(const struct timespec *, const struct timespec *);
-
-int read_current_timer(unsigned long *timer_val);
-
-/* The clock frequency of the i8253/i8254 PIT */
-#define PIT_TICK_RATE 1193182ul
-
-#endif /* KERNEL */
-
-#endif /* LINUX_TIMEX_H */
diff --git a/ANDROID_3.4.5/include/linux/tiocl.h b/ANDROID_3.4.5/include/linux/tiocl.h
deleted file mode 100644
index 4756862c..00000000
--- a/ANDROID_3.4.5/include/linux/tiocl.h
+++ /dev/null
@@ -1,39 +0,0 @@
-#ifndef _LINUX_TIOCL_H
-#define _LINUX_TIOCL_H
-
-#define TIOCL_SETSEL	2	/* set a selection */
-#define 	TIOCL_SELCHAR	0	/* select characters */
-#define 	TIOCL_SELWORD	1	/* select whole words */
-#define 	TIOCL_SELLINE	2	/* select whole lines */
-#define 	TIOCL_SELPOINTER	3	/* show the pointer */
-#define 	TIOCL_SELCLEAR	4	/* clear visibility of selection */
-#define 	TIOCL_SELMOUSEREPORT	16	/* report beginning of selection */
-#define 	TIOCL_SELBUTTONMASK	15	/* button mask for report */
-/* selection extent */
-struct tiocl_selection {
-	unsigned short xs;	/* X start */
-	unsigned short ys;	/* Y start */
-	unsigned short xe;	/* X end */
-	unsigned short ye;	/* Y end */
-	unsigned short sel_mode;	/* selection mode */
-};
-
-#define TIOCL_PASTESEL	3	/* paste previous selection */
-#define TIOCL_UNBLANKSCREEN	4	/* unblank screen */
-
-#define TIOCL_SELLOADLUT	5
-	/* set characters to be considered alphabetic when selecting */
-	/* u32[8] bit array, 4 bytes-aligned with type */
-
-/* these two don't return a value: they write it back in the type */
-#define TIOCL_GETSHIFTSTATE	6	/* write shift state */
-#define TIOCL_GETMOUSEREPORTING	7	/* write whether mouse event are reported */
-#define TIOCL_SETVESABLANK	10	/* set vesa blanking mode */
-#define TIOCL_SETKMSGREDIRECT	11	/* restrict kernel messages to a vt */
-#define TIOCL_GETFGCONSOLE	12	/* get foreground vt */
-#define TIOCL_SCROLLCONSOLE	13	/* scroll console */
-#define TIOCL_BLANKSCREEN	14	/* keep screen blank even if a key is pressed */
-#define TIOCL_BLANKEDSCREEN	15	/* return which vt was blanked */
-#define TIOCL_GETKMSGREDIRECT	17	/* get the vt the kernel messages are restricted to */
-
-#endif /* _LINUX_TIOCL_H */
diff --git a/ANDROID_3.4.5/include/linux/tipc.h b/ANDROID_3.4.5/include/linux/tipc.h
deleted file mode 100644
index f2d90091..00000000
--- a/ANDROID_3.4.5/include/linux/tipc.h
+++ /dev/null
@@ -1,209 +0,0 @@
-/*
- * include/linux/tipc.h: Include file for TIPC socket interface
- *
- * Copyright (c) 2003-2006, Ericsson AB
- * Copyright (c) 2005, 2010-2011, Wind River Systems
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. Neither the names of the copyright holders nor the names of its
- *    contributors may be used to endorse or promote products derived from
- *    this software without specific prior written permission.
- *
- * Alternatively, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") version 2 as published by the Free
- * Software Foundation.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
- * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
- * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
- * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- */
-
-#ifndef _LINUX_TIPC_H_
-#define _LINUX_TIPC_H_
-
-#include <linux/types.h>
-
-/*
- * TIPC addressing primitives
- */
-
-struct tipc_portid {
-	__u32 ref;
-	__u32 node;
-};
-
-struct tipc_name {
-	__u32 type;
-	__u32 instance;
-};
-
-struct tipc_name_seq {
-	__u32 type;
-	__u32 lower;
-	__u32 upper;
-};
-
-static inline __u32 tipc_addr(unsigned int zone,
-			      unsigned int cluster,
-			      unsigned int node)
-{
-	return (zone << 24) | (cluster << 12) | node;
-}
-
-static inline unsigned int tipc_zone(__u32 addr)
-{
-	return addr >> 24;
-}
-
-static inline unsigned int tipc_cluster(__u32 addr)
-{
-	return (addr >> 12) & 0xfff;
-}
-
-static inline unsigned int tipc_node(__u32 addr)
-{
-	return addr & 0xfff;
-}
-
-/*
- * Application-accessible port name types
- */
-
-#define TIPC_CFG_SRV		0	/* configuration service name type */
-#define TIPC_TOP_SRV		1	/* topology service name type */
-#define TIPC_RESERVED_TYPES	64	/* lowest user-publishable name type */
-
-/*
- * Publication scopes when binding port names and port name sequences
- */
-
-#define TIPC_ZONE_SCOPE		1
-#define TIPC_CLUSTER_SCOPE	2
-#define TIPC_NODE_SCOPE		3
-
-/*
- * Limiting values for messages
- */
-
-#define TIPC_MAX_USER_MSG_SIZE	66000U
-
-/*
- * Message importance levels
- */
-
-#define TIPC_LOW_IMPORTANCE		0
-#define TIPC_MEDIUM_IMPORTANCE		1
-#define TIPC_HIGH_IMPORTANCE		2
-#define TIPC_CRITICAL_IMPORTANCE	3
-
-/*
- * Msg rejection/connection shutdown reasons
- */
-
-#define TIPC_OK			0
-#define TIPC_ERR_NO_NAME	1
-#define TIPC_ERR_NO_PORT	2
-#define TIPC_ERR_NO_NODE	3
-#define TIPC_ERR_OVERLOAD	4
-#define TIPC_CONN_SHUTDOWN	5
-
-/*
- * TIPC topology subscription service definitions
- */
-
-#define TIPC_SUB_PORTS		0x01	/* filter for port availability */
-#define TIPC_SUB_SERVICE	0x02	/* filter for service availability */
-#define TIPC_SUB_CANCEL		0x04	/* cancel a subscription */
-
-#define TIPC_WAIT_FOREVER	(~0)	/* timeout for permanent subscription */
-
-struct tipc_subscr {
-	struct tipc_name_seq seq;	/* name sequence of interest */
-	__u32 timeout;			/* subscription duration (in ms) */
-	__u32 filter;			/* bitmask of filter options */
-	char usr_handle[8];		/* available for subscriber use */
-};
-
-#define TIPC_PUBLISHED		1	/* publication event */
-#define TIPC_WITHDRAWN		2	/* withdraw event */
-#define TIPC_SUBSCR_TIMEOUT	3	/* subscription timeout event */
-
-struct tipc_event {
-	__u32 event;			/* event type */
-	__u32 found_lower;		/* matching name seq instances */
-	__u32 found_upper;		/*    "      "    "     "      */
-	struct tipc_portid port;	/* associated port */
-	struct tipc_subscr s;		/* associated subscription */
-};
-
-/*
- * Socket API
- */
-
-#ifndef AF_TIPC
-#define AF_TIPC		30
-#endif
-
-#ifndef PF_TIPC
-#define PF_TIPC		AF_TIPC
-#endif
-
-#ifndef SOL_TIPC
-#define SOL_TIPC	271
-#endif
-
-#define TIPC_ADDR_NAMESEQ	1
-#define TIPC_ADDR_MCAST		1
-#define TIPC_ADDR_NAME		2
-#define TIPC_ADDR_ID		3
-
-struct sockaddr_tipc {
-	unsigned short family;
-	unsigned char  addrtype;
-	signed   char  scope;
-	union {
-		struct tipc_portid id;
-		struct tipc_name_seq nameseq;
-		struct {
-			struct tipc_name name;
-			__u32 domain;
-		} name;
-	} addr;
-};
-
-/*
- * Ancillary data objects supported by recvmsg()
- */
-
-#define TIPC_ERRINFO	1	/* error info */
-#define TIPC_RETDATA	2	/* returned data */
-#define TIPC_DESTNAME	3	/* destination name */
-
-/*
- * TIPC-specific socket option values
- */
-
-#define TIPC_IMPORTANCE		127	/* Default: TIPC_LOW_IMPORTANCE */
-#define TIPC_SRC_DROPPABLE	128	/* Default: based on socket type */
-#define TIPC_DEST_DROPPABLE	129	/* Default: based on socket type */
-#define TIPC_CONN_TIMEOUT	130	/* Default: 8000 (ms)  */
-#define TIPC_NODE_RECVQ_DEPTH	131	/* Default: none (read only) */
-#define TIPC_SOCK_RECVQ_DEPTH	132	/* Default: none (read only) */
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/tipc_config.h b/ANDROID_3.4.5/include/linux/tipc_config.h
deleted file mode 100644
index 9730b0e5..00000000
--- a/ANDROID_3.4.5/include/linux/tipc_config.h
+++ /dev/null
@@ -1,395 +0,0 @@
-/*
- * include/linux/tipc_config.h: Include file for TIPC configuration interface
- *
- * Copyright (c) 2003-2006, Ericsson AB
- * Copyright (c) 2005-2007, 2010-2011, Wind River Systems
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. Neither the names of the copyright holders nor the names of its
- *    contributors may be used to endorse or promote products derived from
- *    this software without specific prior written permission.
- *
- * Alternatively, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") version 2 as published by the Free
- * Software Foundation.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
- * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
- * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
- * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- */
-
-#ifndef _LINUX_TIPC_CONFIG_H_
-#define _LINUX_TIPC_CONFIG_H_
-
-#include <linux/types.h>
-#include <linux/string.h>
-#include <asm/byteorder.h>
-
-#ifndef __KERNEL__
-#include <arpa/inet.h> /* for ntohs etc. */
-#endif
-
-/*
- * Configuration
- *
- * All configuration management messaging involves sending a request message
- * to the TIPC configuration service on a node, which sends a reply message
- * back.  (In the future multi-message replies may be supported.)
- *
- * Both request and reply messages consist of a transport header and payload.
- * The transport header contains info about the desired operation;
- * the payload consists of zero or more type/length/value (TLV) items
- * which specify parameters or results for the operation.
- *
- * For many operations, the request and reply messages have a fixed number
- * of TLVs (usually zero or one); however, some reply messages may return
- * a variable number of TLVs.  A failed request is denoted by the presence
- * of an "error string" TLV in the reply message instead of the TLV(s) the
- * reply should contain if the request succeeds.
- */
-
-/*
- * Public commands:
- * May be issued by any process.
- * Accepted by own node, or by remote node only if remote management enabled.
- */
-
-#define  TIPC_CMD_NOOP              0x0000    /* tx none, rx none */
-#define  TIPC_CMD_GET_NODES         0x0001    /* tx net_addr, rx node_info(s) */
-#define  TIPC_CMD_GET_MEDIA_NAMES   0x0002    /* tx none, rx media_name(s) */
-#define  TIPC_CMD_GET_BEARER_NAMES  0x0003    /* tx none, rx bearer_name(s) */
-#define  TIPC_CMD_GET_LINKS         0x0004    /* tx net_addr, rx link_info(s) */
-#define  TIPC_CMD_SHOW_NAME_TABLE   0x0005    /* tx name_tbl_query, rx ultra_string */
-#define  TIPC_CMD_SHOW_PORTS        0x0006    /* tx none, rx ultra_string */
-#define  TIPC_CMD_SHOW_LINK_STATS   0x000B    /* tx link_name, rx ultra_string */
-#define  TIPC_CMD_SHOW_STATS        0x000F    /* tx unsigned, rx ultra_string */
-
-/*
- * Protected commands:
- * May only be issued by "network administration capable" process.
- * Accepted by own node, or by remote node only if remote management enabled
- * and this node is zone manager.
- */
-
-#define  TIPC_CMD_GET_REMOTE_MNG    0x4003    /* tx none, rx unsigned */
-#define  TIPC_CMD_GET_MAX_PORTS     0x4004    /* tx none, rx unsigned */
-#define  TIPC_CMD_GET_MAX_PUBL      0x4005    /* tx none, rx unsigned */
-#define  TIPC_CMD_GET_MAX_SUBSCR    0x4006    /* tx none, rx unsigned */
-#define  TIPC_CMD_GET_MAX_ZONES     0x4007    /* obsoleted */
-#define  TIPC_CMD_GET_MAX_CLUSTERS  0x4008    /* obsoleted */
-#define  TIPC_CMD_GET_MAX_NODES     0x4009    /* obsoleted */
-#define  TIPC_CMD_GET_MAX_SLAVES    0x400A    /* obsoleted */
-#define  TIPC_CMD_GET_NETID         0x400B    /* tx none, rx unsigned */
-
-#define  TIPC_CMD_ENABLE_BEARER     0x4101    /* tx bearer_config, rx none */
-#define  TIPC_CMD_DISABLE_BEARER    0x4102    /* tx bearer_name, rx none */
-#define  TIPC_CMD_SET_LINK_TOL      0x4107    /* tx link_config, rx none */
-#define  TIPC_CMD_SET_LINK_PRI      0x4108    /* tx link_config, rx none */
-#define  TIPC_CMD_SET_LINK_WINDOW   0x4109    /* tx link_config, rx none */
-#define  TIPC_CMD_SET_LOG_SIZE      0x410A    /* tx unsigned, rx none */
-#define  TIPC_CMD_DUMP_LOG          0x410B    /* tx none, rx ultra_string */
-#define  TIPC_CMD_RESET_LINK_STATS  0x410C    /* tx link_name, rx none */
-
-/*
- * Private commands:
- * May only be issued by "network administration capable" process.
- * Accepted by own node only; cannot be used on a remote node.
- */
-
-#define  TIPC_CMD_SET_NODE_ADDR     0x8001    /* tx net_addr, rx none */
-#define  TIPC_CMD_SET_REMOTE_MNG    0x8003    /* tx unsigned, rx none */
-#define  TIPC_CMD_SET_MAX_PORTS     0x8004    /* tx unsigned, rx none */
-#define  TIPC_CMD_SET_MAX_PUBL      0x8005    /* tx unsigned, rx none */
-#define  TIPC_CMD_SET_MAX_SUBSCR    0x8006    /* tx unsigned, rx none */
-#define  TIPC_CMD_SET_MAX_ZONES     0x8007    /* obsoleted */
-#define  TIPC_CMD_SET_MAX_CLUSTERS  0x8008    /* obsoleted */
-#define  TIPC_CMD_SET_MAX_NODES     0x8009    /* obsoleted */
-#define  TIPC_CMD_SET_MAX_SLAVES    0x800A    /* obsoleted */
-#define  TIPC_CMD_SET_NETID         0x800B    /* tx unsigned, rx none */
-
-/*
- * Reserved commands:
- * May not be issued by any process.
- * Used internally by TIPC.
- */
-
-#define  TIPC_CMD_NOT_NET_ADMIN     0xC001    /* tx none, rx none */
-
-/*
- * TLV types defined for TIPC
- */
-
-#define TIPC_TLV_NONE		0	/* no TLV present */
-#define TIPC_TLV_VOID		1	/* empty TLV (0 data bytes)*/
-#define TIPC_TLV_UNSIGNED	2	/* 32-bit integer */
-#define TIPC_TLV_STRING		3	/* char[128] (max) */
-#define TIPC_TLV_LARGE_STRING	4	/* char[2048] (max) */
-#define TIPC_TLV_ULTRA_STRING	5	/* char[32768] (max) */
-
-#define TIPC_TLV_ERROR_STRING	16	/* char[128] containing "error code" */
-#define TIPC_TLV_NET_ADDR	17	/* 32-bit integer denoting <Z.C.N> */
-#define TIPC_TLV_MEDIA_NAME	18	/* char[TIPC_MAX_MEDIA_NAME] */
-#define TIPC_TLV_BEARER_NAME	19	/* char[TIPC_MAX_BEARER_NAME] */
-#define TIPC_TLV_LINK_NAME	20	/* char[TIPC_MAX_LINK_NAME] */
-#define TIPC_TLV_NODE_INFO	21	/* struct tipc_node_info */
-#define TIPC_TLV_LINK_INFO	22	/* struct tipc_link_info */
-#define TIPC_TLV_BEARER_CONFIG	23	/* struct tipc_bearer_config */
-#define TIPC_TLV_LINK_CONFIG	24	/* struct tipc_link_config */
-#define TIPC_TLV_NAME_TBL_QUERY	25	/* struct tipc_name_table_query */
-#define TIPC_TLV_PORT_REF	26	/* 32-bit port reference */
-
-/*
- * Maximum sizes of TIPC bearer-related names (including terminating NUL)
- */
-
-#define TIPC_MAX_MEDIA_NAME	16	/* format = media */
-#define TIPC_MAX_IF_NAME	16	/* format = interface */
-#define TIPC_MAX_BEARER_NAME	32	/* format = media:interface */
-#define TIPC_MAX_LINK_NAME	60	/* format = Z.C.N:interface-Z.C.N:interface */
-
-/*
- * Link priority limits (min, default, max, media default)
- */
-
-#define TIPC_MIN_LINK_PRI	0
-#define TIPC_DEF_LINK_PRI	10
-#define TIPC_MAX_LINK_PRI	31
-#define TIPC_MEDIA_LINK_PRI	(TIPC_MAX_LINK_PRI + 1)
-
-/*
- * Link tolerance limits (min, default, max), in ms
- */
-
-#define TIPC_MIN_LINK_TOL 50
-#define TIPC_DEF_LINK_TOL 1500
-#define TIPC_MAX_LINK_TOL 30000
-
-#if (TIPC_MIN_LINK_TOL < 16)
-#error "TIPC_MIN_LINK_TOL is too small (abort limit may be NaN)"
-#endif
-
-/*
- * Link window limits (min, default, max), in packets
- */
-
-#define TIPC_MIN_LINK_WIN 16
-#define TIPC_DEF_LINK_WIN 50
-#define TIPC_MAX_LINK_WIN 150
-
-
-struct tipc_node_info {
-	__be32 addr;			/* network address of node */
-	__be32 up;			/* 0=down, 1= up */
-};
-
-struct tipc_link_info {
-	__be32 dest;			/* network address of peer node */
-	__be32 up;			/* 0=down, 1=up */
-	char str[TIPC_MAX_LINK_NAME];	/* link name */
-};
-
-struct tipc_bearer_config {
-	__be32 priority;		/* Range [1,31]. Override per link  */
-	__be32 disc_domain;		/* <Z.C.N> describing desired nodes */
-	char name[TIPC_MAX_BEARER_NAME];
-};
-
-struct tipc_link_config {
-	__be32 value;
-	char name[TIPC_MAX_LINK_NAME];
-};
-
-#define TIPC_NTQ_ALLTYPES 0x80000000
-
-struct tipc_name_table_query {
-	__be32 depth;	/* 1:type, 2:+name info, 3:+port info, 4+:+debug info */
-	__be32 type;	/* {t,l,u} info ignored if high bit of "depth" is set */
-	__be32 lowbound; /* (i.e. displays all entries of name table) */
-	__be32 upbound;
-};
-
-/*
- * The error string TLV is a null-terminated string describing the cause
- * of the request failure.  To simplify error processing (and to save space)
- * the first character of the string can be a special error code character
- * (lying by the range 0x80 to 0xFF) which represents a pre-defined reason.
- */
-
-#define TIPC_CFG_TLV_ERROR      "\x80"  /* request contains incorrect TLV(s) */
-#define TIPC_CFG_NOT_NET_ADMIN  "\x81"	/* must be network administrator */
-#define TIPC_CFG_NOT_ZONE_MSTR	"\x82"	/* must be zone master */
-#define TIPC_CFG_NO_REMOTE	"\x83"	/* remote management not enabled */
-#define TIPC_CFG_NOT_SUPPORTED  "\x84"	/* request is not supported by TIPC */
-#define TIPC_CFG_INVALID_VALUE  "\x85"  /* request has invalid argument value */
-
-/*
- * A TLV consists of a descriptor, followed by the TLV value.
- * TLV descriptor fields are stored in network byte order;
- * TLV values must also be stored in network byte order (where applicable).
- * TLV descriptors must be aligned to addresses which are multiple of 4,
- * so up to 3 bytes of padding may exist at the end of the TLV value area.
- * There must not be any padding between the TLV descriptor and its value.
- */
-
-struct tlv_desc {
-	__be16 tlv_len;		/* TLV length (descriptor + value) */
-	__be16 tlv_type;		/* TLV identifier */
-};
-
-#define TLV_ALIGNTO 4
-
-#define TLV_ALIGN(datalen) (((datalen)+(TLV_ALIGNTO-1)) & ~(TLV_ALIGNTO-1))
-#define TLV_LENGTH(datalen) (sizeof(struct tlv_desc) + (datalen))
-#define TLV_SPACE(datalen) (TLV_ALIGN(TLV_LENGTH(datalen)))
-#define TLV_DATA(tlv) ((void *)((char *)(tlv) + TLV_LENGTH(0)))
-
-static inline int TLV_OK(const void *tlv, __u16 space)
-{
-	/*
-	 * Would also like to check that "tlv" is a multiple of 4,
-	 * but don't know how to do this in a portable way.
-	 * - Tried doing (!(tlv & (TLV_ALIGNTO-1))), but GCC compiler
-	 *   won't allow binary "&" with a pointer.
-	 * - Tried casting "tlv" to integer type, but causes warning about size
-	 *   mismatch when pointer is bigger than chosen type (int, long, ...).
-	 */
-
-	return (space >= TLV_SPACE(0)) &&
-		(ntohs(((struct tlv_desc *)tlv)->tlv_len) <= space);
-}
-
-static inline int TLV_CHECK(const void *tlv, __u16 space, __u16 exp_type)
-{
-	return TLV_OK(tlv, space) &&
-		(ntohs(((struct tlv_desc *)tlv)->tlv_type) == exp_type);
-}
-
-static inline int TLV_SET(void *tlv, __u16 type, void *data, __u16 len)
-{
-	struct tlv_desc *tlv_ptr;
-	int tlv_len;
-
-	tlv_len = TLV_LENGTH(len);
-	tlv_ptr = (struct tlv_desc *)tlv;
-	tlv_ptr->tlv_type = htons(type);
-	tlv_ptr->tlv_len  = htons(tlv_len);
-	if (len && data)
-		memcpy(TLV_DATA(tlv_ptr), data, tlv_len);
-	return TLV_SPACE(len);
-}
-
-/*
- * A TLV list descriptor simplifies processing of messages
- * containing multiple TLVs.
- */
-
-struct tlv_list_desc {
-	struct tlv_desc *tlv_ptr;	/* ptr to current TLV */
-	__u32 tlv_space;		/* # bytes from curr TLV to list end */
-};
-
-static inline void TLV_LIST_INIT(struct tlv_list_desc *list,
-				 void *data, __u32 space)
-{
-	list->tlv_ptr = (struct tlv_desc *)data;
-	list->tlv_space = space;
-}
-
-static inline int TLV_LIST_EMPTY(struct tlv_list_desc *list)
-{
-	return (list->tlv_space == 0);
-}
-
-static inline int TLV_LIST_CHECK(struct tlv_list_desc *list, __u16 exp_type)
-{
-	return TLV_CHECK(list->tlv_ptr, list->tlv_space, exp_type);
-}
-
-static inline void *TLV_LIST_DATA(struct tlv_list_desc *list)
-{
-	return TLV_DATA(list->tlv_ptr);
-}
-
-static inline void TLV_LIST_STEP(struct tlv_list_desc *list)
-{
-	__u16 tlv_space = TLV_ALIGN(ntohs(list->tlv_ptr->tlv_len));
-
-	list->tlv_ptr = (struct tlv_desc *)((char *)list->tlv_ptr + tlv_space);
-	list->tlv_space -= tlv_space;
-}
-
-/*
- * Configuration messages exchanged via NETLINK_GENERIC use the following
- * family id, name, version and command.
- */
-#define TIPC_GENL_NAME		"TIPC"
-#define TIPC_GENL_VERSION	0x1
-#define TIPC_GENL_CMD		0x1
-
-/*
- * TIPC specific header used in NETLINK_GENERIC requests.
- */
-struct tipc_genlmsghdr {
-	__u32 dest;		/* Destination address */
-	__u16 cmd;		/* Command */
-	__u16 reserved;		/* Unused */
-};
-
-#define TIPC_GENL_HDRLEN	NLMSG_ALIGN(sizeof(struct tipc_genlmsghdr))
-
-/*
- * Configuration messages exchanged via TIPC sockets use the TIPC configuration
- * message header, which is defined below.  This structure is analogous
- * to the Netlink message header, but fields are stored in network byte order
- * and no padding is permitted between the header and the message data
- * that follows.
- */
-
-struct tipc_cfg_msg_hdr {
-	__be32 tcm_len;		/* Message length (including header) */
-	__be16 tcm_type;	/* Command type */
-	__be16 tcm_flags;	/* Additional flags */
-	char  tcm_reserved[8];	/* Unused */
-};
-
-#define TCM_F_REQUEST	0x1	/* Flag: Request message */
-#define TCM_F_MORE	0x2	/* Flag: Message to be continued */
-
-#define TCM_ALIGN(datalen)  (((datalen)+3) & ~3)
-#define TCM_LENGTH(datalen) (sizeof(struct tipc_cfg_msg_hdr) + datalen)
-#define TCM_SPACE(datalen)  (TCM_ALIGN(TCM_LENGTH(datalen)))
-#define TCM_DATA(tcm_hdr)   ((void *)((char *)(tcm_hdr) + TCM_LENGTH(0)))
-
-static inline int TCM_SET(void *msg, __u16 cmd, __u16 flags,
-			  void *data, __u16 data_len)
-{
-	struct tipc_cfg_msg_hdr *tcm_hdr;
-	int msg_len;
-
-	msg_len = TCM_LENGTH(data_len);
-	tcm_hdr = (struct tipc_cfg_msg_hdr *)msg;
-	tcm_hdr->tcm_len   = htonl(msg_len);
-	tcm_hdr->tcm_type  = htons(cmd);
-	tcm_hdr->tcm_flags = htons(flags);
-	if (data_len && data)
-		memcpy(TCM_DATA(msg), data, data_len);
-	return TCM_SPACE(data_len);
-}
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/topology.h b/ANDROID_3.4.5/include/linux/topology.h
deleted file mode 100644
index e26db031..00000000
--- a/ANDROID_3.4.5/include/linux/topology.h
+++ /dev/null
@@ -1,335 +0,0 @@
-/*
- * include/linux/topology.h
- *
- * Written by: Matthew Dobson, IBM Corporation
- *
- * Copyright (C) 2002, IBM Corp.
- *
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
- * NON INFRINGEMENT.  See the GNU General Public License for more
- * details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * Send feedback to <colpatch@us.ibm.com>
- */
-#ifndef _LINUX_TOPOLOGY_H
-#define _LINUX_TOPOLOGY_H
-
-#include <linux/cpumask.h>
-#include <linux/bitops.h>
-#include <linux/mmzone.h>
-#include <linux/smp.h>
-#include <linux/percpu.h>
-#include <asm/topology.h>
-
-#ifndef node_has_online_mem
-#define node_has_online_mem(nid) (1)
-#endif
-
-#ifndef nr_cpus_node
-#define nr_cpus_node(node) cpumask_weight(cpumask_of_node(node))
-#endif
-
-#define for_each_node_with_cpus(node)			\
-	for_each_online_node(node)			\
-		if (nr_cpus_node(node))
-
-int arch_update_cpu_topology(void);
-
-/* Conform to ACPI 2.0 SLIT distance definitions */
-#define LOCAL_DISTANCE		10
-#define REMOTE_DISTANCE		20
-#ifndef node_distance
-#define node_distance(from,to)	((from) == (to) ? LOCAL_DISTANCE : REMOTE_DISTANCE)
-#endif
-#ifndef RECLAIM_DISTANCE
-/*
- * If the distance between nodes in a system is larger than RECLAIM_DISTANCE
- * (in whatever arch specific measurement units returned by node_distance())
- * then switch on zone reclaim on boot.
- */
-#define RECLAIM_DISTANCE 30
-#endif
-#ifndef PENALTY_FOR_NODE_WITH_CPUS
-#define PENALTY_FOR_NODE_WITH_CPUS	(1)
-#endif
-
-/*
- * Below are the 3 major initializers used in building sched_domains:
- * SD_SIBLING_INIT, for SMT domains
- * SD_CPU_INIT, for SMP domains
- * SD_NODE_INIT, for NUMA domains
- *
- * Any architecture that cares to do any tuning to these values should do so
- * by defining their own arch-specific initializer in include/asm/topology.h.
- * A definition there will automagically override these default initializers
- * and allow arch-specific performance tuning of sched_domains.
- * (Only non-zero and non-null fields need be specified.)
- */
-
-#ifdef CONFIG_SCHED_SMT
-/* MCD - Do we really need this?  It is always on if CONFIG_SCHED_SMT is,
- * so can't we drop this in favor of CONFIG_SCHED_SMT?
- */
-#define ARCH_HAS_SCHED_WAKE_IDLE
-/* Common values for SMT siblings */
-#ifndef SD_SIBLING_INIT
-#define SD_SIBLING_INIT (struct sched_domain) {				\
-	.min_interval		= 1,					\
-	.max_interval		= 2,					\
-	.busy_factor		= 64,					\
-	.imbalance_pct		= 110,					\
-									\
-	.flags			= 1*SD_LOAD_BALANCE			\
-				| 1*SD_BALANCE_NEWIDLE			\
-				| 1*SD_BALANCE_EXEC			\
-				| 1*SD_BALANCE_FORK			\
-				| 0*SD_BALANCE_WAKE			\
-				| 1*SD_WAKE_AFFINE			\
-				| 1*SD_SHARE_CPUPOWER			\
-				| 0*SD_POWERSAVINGS_BALANCE		\
-				| 1*SD_SHARE_PKG_RESOURCES		\
-				| 0*SD_SERIALIZE			\
-				| 0*SD_PREFER_SIBLING			\
-				| arch_sd_sibling_asym_packing()	\
-				,					\
-	.last_balance		= jiffies,				\
-	.balance_interval	= 1,					\
-	.smt_gain		= 1178,	/* 15% */			\
-}
-#endif
-#endif /* CONFIG_SCHED_SMT */
-
-#ifdef CONFIG_SCHED_MC
-/* Common values for MC siblings. for now mostly derived from SD_CPU_INIT */
-#ifndef SD_MC_INIT
-#define SD_MC_INIT (struct sched_domain) {				\
-	.min_interval		= 1,					\
-	.max_interval		= 4,					\
-	.busy_factor		= 64,					\
-	.imbalance_pct		= 125,					\
-	.cache_nice_tries	= 1,					\
-	.busy_idx		= 2,					\
-	.wake_idx		= 0,					\
-	.forkexec_idx		= 0,					\
-									\
-	.flags			= 1*SD_LOAD_BALANCE			\
-				| 1*SD_BALANCE_NEWIDLE			\
-				| 1*SD_BALANCE_EXEC			\
-				| 1*SD_BALANCE_FORK			\
-				| 0*SD_BALANCE_WAKE			\
-				| 1*SD_WAKE_AFFINE			\
-				| 0*SD_PREFER_LOCAL			\
-				| 0*SD_SHARE_CPUPOWER			\
-				| 1*SD_SHARE_PKG_RESOURCES		\
-				| 0*SD_SERIALIZE			\
-				| sd_balance_for_mc_power()		\
-				| sd_power_saving_flags()		\
-				,					\
-	.last_balance		= jiffies,				\
-	.balance_interval	= 1,					\
-}
-#endif
-#endif /* CONFIG_SCHED_MC */
-
-/* Common values for CPUs */
-#ifndef SD_CPU_INIT
-#define SD_CPU_INIT (struct sched_domain) {				\
-	.min_interval		= 1,					\
-	.max_interval		= 4,					\
-	.busy_factor		= 64,					\
-	.imbalance_pct		= 125,					\
-	.cache_nice_tries	= 1,					\
-	.busy_idx		= 2,					\
-	.idle_idx		= 1,					\
-	.newidle_idx		= 0,					\
-	.wake_idx		= 0,					\
-	.forkexec_idx		= 0,					\
-									\
-	.flags			= 1*SD_LOAD_BALANCE			\
-				| 1*SD_BALANCE_NEWIDLE			\
-				| 1*SD_BALANCE_EXEC			\
-				| 1*SD_BALANCE_FORK			\
-				| 0*SD_BALANCE_WAKE			\
-				| 1*SD_WAKE_AFFINE			\
-				| 0*SD_PREFER_LOCAL			\
-				| 0*SD_SHARE_CPUPOWER			\
-				| 0*SD_SHARE_PKG_RESOURCES		\
-				| 0*SD_SERIALIZE			\
-				| sd_balance_for_package_power()	\
-				| sd_power_saving_flags()		\
-				,					\
-	.last_balance		= jiffies,				\
-	.balance_interval	= 1,					\
-}
-#endif
-
-/* sched_domains SD_ALLNODES_INIT for NUMA machines */
-#define SD_ALLNODES_INIT (struct sched_domain) {			\
-	.min_interval		= 64,					\
-	.max_interval		= 64*num_online_cpus(),			\
-	.busy_factor		= 128,					\
-	.imbalance_pct		= 133,					\
-	.cache_nice_tries	= 1,					\
-	.busy_idx		= 3,					\
-	.idle_idx		= 3,					\
-	.flags			= 1*SD_LOAD_BALANCE			\
-				| 1*SD_BALANCE_NEWIDLE			\
-				| 0*SD_BALANCE_EXEC			\
-				| 0*SD_BALANCE_FORK			\
-				| 0*SD_BALANCE_WAKE			\
-				| 0*SD_WAKE_AFFINE			\
-				| 0*SD_SHARE_CPUPOWER			\
-				| 0*SD_POWERSAVINGS_BALANCE		\
-				| 0*SD_SHARE_PKG_RESOURCES		\
-				| 1*SD_SERIALIZE			\
-				| 0*SD_PREFER_SIBLING			\
-				,					\
-	.last_balance		= jiffies,				\
-	.balance_interval	= 64,					\
-}
-
-#ifndef SD_NODES_PER_DOMAIN
-#define SD_NODES_PER_DOMAIN 16
-#endif
-
-#ifdef CONFIG_SCHED_BOOK
-#ifndef SD_BOOK_INIT
-#error Please define an appropriate SD_BOOK_INIT in include/asm/topology.h!!!
-#endif
-#endif /* CONFIG_SCHED_BOOK */
-
-#ifdef CONFIG_NUMA
-#ifndef SD_NODE_INIT
-#error Please define an appropriate SD_NODE_INIT in include/asm/topology.h!!!
-#endif
-
-#endif /* CONFIG_NUMA */
-
-#ifdef CONFIG_USE_PERCPU_NUMA_NODE_ID
-DECLARE_PER_CPU(int, numa_node);
-
-#ifndef numa_node_id
-/* Returns the number of the current Node. */
-static inline int numa_node_id(void)
-{
-	return __this_cpu_read(numa_node);
-}
-#endif
-
-#ifndef cpu_to_node
-static inline int cpu_to_node(int cpu)
-{
-	return per_cpu(numa_node, cpu);
-}
-#endif
-
-#ifndef set_numa_node
-static inline void set_numa_node(int node)
-{
-	percpu_write(numa_node, node);
-}
-#endif
-
-#ifndef set_cpu_numa_node
-static inline void set_cpu_numa_node(int cpu, int node)
-{
-	per_cpu(numa_node, cpu) = node;
-}
-#endif
-
-#else	/* !CONFIG_USE_PERCPU_NUMA_NODE_ID */
-
-/* Returns the number of the current Node. */
-#ifndef numa_node_id
-static inline int numa_node_id(void)
-{
-	return cpu_to_node(raw_smp_processor_id());
-}
-#endif
-
-#endif	/* [!]CONFIG_USE_PERCPU_NUMA_NODE_ID */
-
-#ifdef CONFIG_HAVE_MEMORYLESS_NODES
-
-/*
- * N.B., Do NOT reference the '_numa_mem_' per cpu variable directly.
- * It will not be defined when CONFIG_HAVE_MEMORYLESS_NODES is not defined.
- * Use the accessor functions set_numa_mem(), numa_mem_id() and cpu_to_mem().
- */
-DECLARE_PER_CPU(int, _numa_mem_);
-
-#ifndef set_numa_mem
-static inline void set_numa_mem(int node)
-{
-	percpu_write(_numa_mem_, node);
-}
-#endif
-
-#ifndef numa_mem_id
-/* Returns the number of the nearest Node with memory */
-static inline int numa_mem_id(void)
-{
-	return __this_cpu_read(_numa_mem_);
-}
-#endif
-
-#ifndef cpu_to_mem
-static inline int cpu_to_mem(int cpu)
-{
-	return per_cpu(_numa_mem_, cpu);
-}
-#endif
-
-#ifndef set_cpu_numa_mem
-static inline void set_cpu_numa_mem(int cpu, int node)
-{
-	per_cpu(_numa_mem_, cpu) = node;
-}
-#endif
-
-#else	/* !CONFIG_HAVE_MEMORYLESS_NODES */
-
-#ifndef numa_mem_id
-/* Returns the number of the nearest Node with memory */
-static inline int numa_mem_id(void)
-{
-	return numa_node_id();
-}
-#endif
-
-#ifndef cpu_to_mem
-static inline int cpu_to_mem(int cpu)
-{
-	return cpu_to_node(cpu);
-}
-#endif
-
-#endif	/* [!]CONFIG_HAVE_MEMORYLESS_NODES */
-
-#ifndef topology_physical_package_id
-#define topology_physical_package_id(cpu)	((void)(cpu), -1)
-#endif
-#ifndef topology_core_id
-#define topology_core_id(cpu)			((void)(cpu), 0)
-#endif
-#ifndef topology_thread_cpumask
-#define topology_thread_cpumask(cpu)		cpumask_of(cpu)
-#endif
-#ifndef topology_core_cpumask
-#define topology_core_cpumask(cpu)		cpumask_of(cpu)
-#endif
-
-#endif /* _LINUX_TOPOLOGY_H */
diff --git a/ANDROID_3.4.5/include/linux/toshiba.h b/ANDROID_3.4.5/include/linux/toshiba.h
deleted file mode 100644
index 772dedbc..00000000
--- a/ANDROID_3.4.5/include/linux/toshiba.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/* toshiba.h -- Linux driver for accessing the SMM on Toshiba laptops 
- *
- * Copyright (c) 1996-2000  Jonathan A. Buzzard (jonathan@buzzard.org.uk)
- *
- * Thanks to Juergen Heinzl <juergen@monocerus.demon.co.uk> for the pointers
- * on making sure the structure is aligned and packed.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2, or (at your option) any
- * later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- */
-
-#ifndef _LINUX_TOSHIBA_H
-#define _LINUX_TOSHIBA_H
-
-#define TOSH_PROC "/proc/toshiba"
-#define TOSH_DEVICE "/dev/toshiba"
-#define TOSH_SMM _IOWR('t', 0x90, int)	/* broken: meant 24 bytes */
-
-typedef struct {
-	unsigned int eax;
-	unsigned int ebx __attribute__ ((packed));
-	unsigned int ecx __attribute__ ((packed));
-	unsigned int edx __attribute__ ((packed));
-	unsigned int esi __attribute__ ((packed));
-	unsigned int edi __attribute__ ((packed));
-} SMMRegisters;
-
-#ifdef __KERNEL__
-int tosh_smm(SMMRegisters *regs);
-#endif /* __KERNEL__ */
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/tpm.h b/ANDROID_3.4.5/include/linux/tpm.h
deleted file mode 100644
index fdc718ab..00000000
--- a/ANDROID_3.4.5/include/linux/tpm.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- * Copyright (C) 2004,2007,2008 IBM Corporation
- *
- * Authors:
- * Leendert van Doorn <leendert@watson.ibm.com>
- * Dave Safford <safford@watson.ibm.com>
- * Reiner Sailer <sailer@watson.ibm.com>
- * Kylene Hall <kjhall@us.ibm.com>
- * Debora Velarde <dvelarde@us.ibm.com>
- *
- * Maintained by: <tpmdd_devel@lists.sourceforge.net>
- *
- * Device driver for TCG/TCPA TPM (trusted platform module).
- * Specifications at www.trustedcomputinggroup.org
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation, version 2 of the
- * License.
- *
- */
-#ifndef __LINUX_TPM_H__
-#define __LINUX_TPM_H__
-
-/*
- * Chip num is this value or a valid tpm idx
- */
-#define	TPM_ANY_NUM 0xFFFF
-
-#if defined(CONFIG_TCG_TPM) || defined(CONFIG_TCG_TPM_MODULE)
-
-extern int tpm_pcr_read(u32 chip_num, int pcr_idx, u8 *res_buf);
-extern int tpm_pcr_extend(u32 chip_num, int pcr_idx, const u8 *hash);
-extern int tpm_send(u32 chip_num, void *cmd, size_t buflen);
-#else
-static inline int tpm_pcr_read(u32 chip_num, int pcr_idx, u8 *res_buf) {
-	return -ENODEV;
-}
-static inline int tpm_pcr_extend(u32 chip_num, int pcr_idx, const u8 *hash) {
-	return -ENODEV;
-}
-static inline int tpm_send(u32 chip_num, void *cmd, size_t buflen) {
-	return -ENODEV;
-}
-#endif
-#endif
diff --git a/ANDROID_3.4.5/include/linux/tpm_command.h b/ANDROID_3.4.5/include/linux/tpm_command.h
deleted file mode 100644
index 727512e2..00000000
--- a/ANDROID_3.4.5/include/linux/tpm_command.h
+++ /dev/null
@@ -1,28 +0,0 @@
-#ifndef __LINUX_TPM_COMMAND_H__
-#define __LINUX_TPM_COMMAND_H__
-
-/*
- * TPM Command constants from specifications at
- * http://www.trustedcomputinggroup.org
- */
-
-/* Command TAGS */
-#define TPM_TAG_RQU_COMMAND             193
-#define TPM_TAG_RQU_AUTH1_COMMAND       194
-#define TPM_TAG_RQU_AUTH2_COMMAND       195
-#define TPM_TAG_RSP_COMMAND             196
-#define TPM_TAG_RSP_AUTH1_COMMAND       197
-#define TPM_TAG_RSP_AUTH2_COMMAND       198
-
-/* Command Ordinals */
-#define TPM_ORD_GETRANDOM               70
-#define TPM_ORD_OSAP                    11
-#define TPM_ORD_OIAP                    10
-#define TPM_ORD_SEAL                    23
-#define TPM_ORD_UNSEAL                  24
-
-/* Other constants */
-#define SRKHANDLE                       0x40000000
-#define TPM_NONCE_SIZE                  20
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/trace_clock.h b/ANDROID_3.4.5/include/linux/trace_clock.h
deleted file mode 100644
index 4eb49023..00000000
--- a/ANDROID_3.4.5/include/linux/trace_clock.h
+++ /dev/null
@@ -1,20 +0,0 @@
-#ifndef _LINUX_TRACE_CLOCK_H
-#define _LINUX_TRACE_CLOCK_H
-
-/*
- * 3 trace clock variants, with differing scalability/precision
- * tradeoffs:
- *
- *  -   local: CPU-local trace clock
- *  -  medium: scalable global clock with some jitter
- *  -  global: globally monotonic, serialized clock
- */
-#include <linux/compiler.h>
-#include <linux/types.h>
-
-extern u64 notrace trace_clock_local(void);
-extern u64 notrace trace_clock(void);
-extern u64 notrace trace_clock_global(void);
-extern u64 notrace trace_clock_counter(void);
-
-#endif /* _LINUX_TRACE_CLOCK_H */
diff --git a/ANDROID_3.4.5/include/linux/trace_seq.h b/ANDROID_3.4.5/include/linux/trace_seq.h
deleted file mode 100644
index a32d86ec..00000000
--- a/ANDROID_3.4.5/include/linux/trace_seq.h
+++ /dev/null
@@ -1,97 +0,0 @@
-#ifndef _LINUX_TRACE_SEQ_H
-#define _LINUX_TRACE_SEQ_H
-
-#include <linux/fs.h>
-
-#include <asm/page.h>
-
-/*
- * Trace sequences are used to allow a function to call several other functions
- * to create a string of data to use (up to a max of PAGE_SIZE).
- */
-
-struct trace_seq {
-	unsigned char		buffer[PAGE_SIZE];
-	unsigned int		len;
-	unsigned int		readpos;
-	int			full;
-};
-
-static inline void
-trace_seq_init(struct trace_seq *s)
-{
-	s->len = 0;
-	s->readpos = 0;
-	s->full = 0;
-}
-
-/*
- * Currently only defined when tracing is enabled.
- */
-#ifdef CONFIG_TRACING
-extern __printf(2, 3)
-int trace_seq_printf(struct trace_seq *s, const char *fmt, ...);
-extern __printf(2, 0)
-int trace_seq_vprintf(struct trace_seq *s, const char *fmt, va_list args);
-extern int
-trace_seq_bprintf(struct trace_seq *s, const char *fmt, const u32 *binary);
-extern int trace_print_seq(struct seq_file *m, struct trace_seq *s);
-extern ssize_t trace_seq_to_user(struct trace_seq *s, char __user *ubuf,
-				 size_t cnt);
-extern int trace_seq_puts(struct trace_seq *s, const char *str);
-extern int trace_seq_putc(struct trace_seq *s, unsigned char c);
-extern int trace_seq_putmem(struct trace_seq *s, const void *mem, size_t len);
-extern int trace_seq_putmem_hex(struct trace_seq *s, const void *mem,
-				size_t len);
-extern void *trace_seq_reserve(struct trace_seq *s, size_t len);
-extern int trace_seq_path(struct trace_seq *s, const struct path *path);
-
-#else /* CONFIG_TRACING */
-static inline int trace_seq_printf(struct trace_seq *s, const char *fmt, ...)
-{
-	return 0;
-}
-static inline int
-trace_seq_bprintf(struct trace_seq *s, const char *fmt, const u32 *binary)
-{
-	return 0;
-}
-
-static inline int trace_print_seq(struct seq_file *m, struct trace_seq *s)
-{
-	return 0;
-}
-static inline ssize_t trace_seq_to_user(struct trace_seq *s, char __user *ubuf,
-				 size_t cnt)
-{
-	return 0;
-}
-static inline int trace_seq_puts(struct trace_seq *s, const char *str)
-{
-	return 0;
-}
-static inline int trace_seq_putc(struct trace_seq *s, unsigned char c)
-{
-	return 0;
-}
-static inline int
-trace_seq_putmem(struct trace_seq *s, const void *mem, size_t len)
-{
-	return 0;
-}
-static inline int trace_seq_putmem_hex(struct trace_seq *s, const void *mem,
-				       size_t len)
-{
-	return 0;
-}
-static inline void *trace_seq_reserve(struct trace_seq *s, size_t len)
-{
-	return NULL;
-}
-static inline int trace_seq_path(struct trace_seq *s, const struct path *path)
-{
-	return 0;
-}
-#endif /* CONFIG_TRACING */
-
-#endif /* _LINUX_TRACE_SEQ_H */
diff --git a/ANDROID_3.4.5/include/linux/tracehook.h b/ANDROID_3.4.5/include/linux/tracehook.h
deleted file mode 100644
index 51bd91d9..00000000
--- a/ANDROID_3.4.5/include/linux/tracehook.h
+++ /dev/null
@@ -1,190 +0,0 @@
-/*
- * Tracing hooks
- *
- * Copyright (C) 2008-2009 Red Hat, Inc.  All rights reserved.
- *
- * This copyrighted material is made available to anyone wishing to use,
- * modify, copy, or redistribute it subject to the terms and conditions
- * of the GNU General Public License v.2.
- *
- * This file defines hook entry points called by core code where
- * user tracing/debugging support might need to do something.  These
- * entry points are called tracehook_*().  Each hook declared below
- * has a detailed kerneldoc comment giving the context (locking et
- * al) from which it is called, and the meaning of its return value.
- *
- * Each function here typically has only one call site, so it is ok
- * to have some nontrivial tracehook_*() inlines.  In all cases, the
- * fast path when no tracing is enabled should be very short.
- *
- * The purpose of this file and the tracehook_* layer is to consolidate
- * the interface that the kernel core and arch code uses to enable any
- * user debugging or tracing facility (such as ptrace).  The interfaces
- * here are carefully documented so that maintainers of core and arch
- * code do not need to think about the implementation details of the
- * tracing facilities.  Likewise, maintainers of the tracing code do not
- * need to understand all the calling core or arch code in detail, just
- * documented circumstances of each call, such as locking conditions.
- *
- * If the calling core code changes so that locking is different, then
- * it is ok to change the interface documented here.  The maintainer of
- * core code changing should notify the maintainers of the tracing code
- * that they need to work out the change.
- *
- * Some tracehook_*() inlines take arguments that the current tracing
- * implementations might not necessarily use.  These function signatures
- * are chosen to pass in all the information that is on hand in the
- * caller and might conceivably be relevant to a tracer, so that the
- * core code won't have to be updated when tracing adds more features.
- * If a call site changes so that some of those parameters are no longer
- * already on hand without extra work, then the tracehook_* interface
- * can change so there is no make-work burden on the core code.  The
- * maintainer of core code changing should notify the maintainers of the
- * tracing code that they need to work out the change.
- */
-
-#ifndef _LINUX_TRACEHOOK_H
-#define _LINUX_TRACEHOOK_H	1
-
-#include <linux/sched.h>
-#include <linux/ptrace.h>
-#include <linux/security.h>
-struct linux_binprm;
-
-/*
- * ptrace report for syscall entry and exit looks identical.
- */
-static inline int ptrace_report_syscall(struct pt_regs *regs)
-{
-	int ptrace = current->ptrace;
-
-	if (!(ptrace & PT_PTRACED))
-		return 0;
-
-	ptrace_notify(SIGTRAP | ((ptrace & PT_TRACESYSGOOD) ? 0x80 : 0));
-
-	/*
-	 * this isn't the same as continuing with a signal, but it will do
-	 * for normal use.  strace only continues with a signal if the
-	 * stopping signal is not SIGTRAP.  -brl
-	 */
-	if (current->exit_code) {
-		send_sig(current->exit_code, current, 1);
-		current->exit_code = 0;
-	}
-
-	return fatal_signal_pending(current);
-}
-
-/**
- * tracehook_report_syscall_entry - task is about to attempt a system call
- * @regs:		user register state of current task
- *
- * This will be called if %TIF_SYSCALL_TRACE has been set, when the
- * current task has just entered the kernel for a system call.
- * Full user register state is available here.  Changing the values
- * in @regs can affect the system call number and arguments to be tried.
- * It is safe to block here, preventing the system call from beginning.
- *
- * Returns zero normally, or nonzero if the calling arch code should abort
- * the system call.  That must prevent normal entry so no system call is
- * made.  If @task ever returns to user mode after this, its register state
- * is unspecified, but should be something harmless like an %ENOSYS error
- * return.  It should preserve enough information so that syscall_rollback()
- * can work (see asm-generic/syscall.h).
- *
- * Called without locks, just after entering kernel mode.
- */
-static inline __must_check int tracehook_report_syscall_entry(
-	struct pt_regs *regs)
-{
-	return ptrace_report_syscall(regs);
-}
-
-/**
- * tracehook_report_syscall_exit - task has just finished a system call
- * @regs:		user register state of current task
- * @step:		nonzero if simulating single-step or block-step
- *
- * This will be called if %TIF_SYSCALL_TRACE has been set, when the
- * current task has just finished an attempted system call.  Full
- * user register state is available here.  It is safe to block here,
- * preventing signals from being processed.
- *
- * If @step is nonzero, this report is also in lieu of the normal
- * trap that would follow the system call instruction because
- * user_enable_block_step() or user_enable_single_step() was used.
- * In this case, %TIF_SYSCALL_TRACE might not be set.
- *
- * Called without locks, just before checking for pending signals.
- */
-static inline void tracehook_report_syscall_exit(struct pt_regs *regs, int step)
-{
-	if (step) {
-		siginfo_t info;
-		user_single_step_siginfo(current, regs, &info);
-		force_sig_info(SIGTRAP, &info, current);
-		return;
-	}
-
-	ptrace_report_syscall(regs);
-}
-
-/**
- * tracehook_signal_handler - signal handler setup is complete
- * @sig:		number of signal being delivered
- * @info:		siginfo_t of signal being delivered
- * @ka:			sigaction setting that chose the handler
- * @regs:		user register state
- * @stepping:		nonzero if debugger single-step or block-step in use
- *
- * Called by the arch code after a signal handler has been set up.
- * Register and stack state reflects the user handler about to run.
- * Signal mask changes have already been made.
- *
- * Called without locks, shortly before returning to user mode
- * (or handling more signals).
- */
-static inline void tracehook_signal_handler(int sig, siginfo_t *info,
-					    const struct k_sigaction *ka,
-					    struct pt_regs *regs, int stepping)
-{
-	if (stepping)
-		ptrace_notify(SIGTRAP);
-}
-
-#ifdef TIF_NOTIFY_RESUME
-/**
- * set_notify_resume - cause tracehook_notify_resume() to be called
- * @task:		task that will call tracehook_notify_resume()
- *
- * Calling this arranges that @task will call tracehook_notify_resume()
- * before returning to user mode.  If it's already running in user mode,
- * it will enter the kernel and call tracehook_notify_resume() soon.
- * If it's blocked, it will not be woken.
- */
-static inline void set_notify_resume(struct task_struct *task)
-{
-	if (!test_and_set_tsk_thread_flag(task, TIF_NOTIFY_RESUME))
-		kick_process(task);
-}
-
-/**
- * tracehook_notify_resume - report when about to return to user mode
- * @regs:		user-mode registers of @current task
- *
- * This is called when %TIF_NOTIFY_RESUME has been set.  Now we are
- * about to return to user mode, and the user state in @regs can be
- * inspected or adjusted.  The caller in arch code has cleared
- * %TIF_NOTIFY_RESUME before the call.  If the flag gets set again
- * asynchronously, this will be called again before we return to
- * user mode.
- *
- * Called without locks.
- */
-static inline void tracehook_notify_resume(struct pt_regs *regs)
-{
-}
-#endif	/* TIF_NOTIFY_RESUME */
-
-#endif	/* <linux/tracehook.h> */
diff --git a/ANDROID_3.4.5/include/linux/tracepoint.h b/ANDROID_3.4.5/include/linux/tracepoint.h
deleted file mode 100644
index bd96ecd0..00000000
--- a/ANDROID_3.4.5/include/linux/tracepoint.h
+++ /dev/null
@@ -1,392 +0,0 @@
-#ifndef _LINUX_TRACEPOINT_H
-#define _LINUX_TRACEPOINT_H
-
-/*
- * Kernel Tracepoint API.
- *
- * See Documentation/trace/tracepoints.txt.
- *
- * (C) Copyright 2008 Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
- *
- * Heavily inspired from the Linux Kernel Markers.
- *
- * This file is released under the GPLv2.
- * See the file COPYING for more details.
- */
-
-#include <linux/errno.h>
-#include <linux/types.h>
-#include <linux/rcupdate.h>
-#include <linux/static_key.h>
-
-struct module;
-struct tracepoint;
-
-struct tracepoint_func {
-	void *func;
-	void *data;
-};
-
-struct tracepoint {
-	const char *name;		/* Tracepoint name */
-	struct static_key key;
-	void (*regfunc)(void);
-	void (*unregfunc)(void);
-	struct tracepoint_func __rcu *funcs;
-};
-
-/*
- * Connect a probe to a tracepoint.
- * Internal API, should not be used directly.
- */
-extern int tracepoint_probe_register(const char *name, void *probe, void *data);
-
-/*
- * Disconnect a probe from a tracepoint.
- * Internal API, should not be used directly.
- */
-extern int
-tracepoint_probe_unregister(const char *name, void *probe, void *data);
-
-extern int tracepoint_probe_register_noupdate(const char *name, void *probe,
-					      void *data);
-extern int tracepoint_probe_unregister_noupdate(const char *name, void *probe,
-						void *data);
-extern void tracepoint_probe_update_all(void);
-
-#ifdef CONFIG_MODULES
-struct tp_module {
-	struct list_head list;
-	unsigned int num_tracepoints;
-	struct tracepoint * const *tracepoints_ptrs;
-};
-#endif /* CONFIG_MODULES */
-
-struct tracepoint_iter {
-#ifdef CONFIG_MODULES
-	struct tp_module *module;
-#endif /* CONFIG_MODULES */
-	struct tracepoint * const *tracepoint;
-};
-
-extern void tracepoint_iter_start(struct tracepoint_iter *iter);
-extern void tracepoint_iter_next(struct tracepoint_iter *iter);
-extern void tracepoint_iter_stop(struct tracepoint_iter *iter);
-extern void tracepoint_iter_reset(struct tracepoint_iter *iter);
-
-/*
- * tracepoint_synchronize_unregister must be called between the last tracepoint
- * probe unregistration and the end of module exit to make sure there is no
- * caller executing a probe when it is freed.
- */
-static inline void tracepoint_synchronize_unregister(void)
-{
-	synchronize_sched();
-}
-
-#define PARAMS(args...) args
-
-#endif /* _LINUX_TRACEPOINT_H */
-
-/*
- * Note: we keep the TRACE_EVENT and DECLARE_TRACE outside the include
- *  file ifdef protection.
- *  This is due to the way trace events work. If a file includes two
- *  trace event headers under one "CREATE_TRACE_POINTS" the first include
- *  will override the TRACE_EVENT and break the second include.
- */
-
-#ifndef DECLARE_TRACE
-
-#define TP_PROTO(args...)	args
-#define TP_ARGS(args...)	args
-#define TP_CONDITION(args...)	args
-
-#ifdef CONFIG_TRACEPOINTS
-
-/*
- * it_func[0] is never NULL because there is at least one element in the array
- * when the array itself is non NULL.
- *
- * Note, the proto and args passed in includes "__data" as the first parameter.
- * The reason for this is to handle the "void" prototype. If a tracepoint
- * has a "void" prototype, then it is invalid to declare a function
- * as "(void *, void)". The DECLARE_TRACE_NOARGS() will pass in just
- * "void *data", where as the DECLARE_TRACE() will pass in "void *data, proto".
- */
-#define __DO_TRACE(tp, proto, args, cond, prercu, postrcu)		\
-	do {								\
-		struct tracepoint_func *it_func_ptr;			\
-		void *it_func;						\
-		void *__data;						\
-									\
-		if (!(cond))						\
-			return;						\
-		prercu;							\
-		rcu_read_lock_sched_notrace();				\
-		it_func_ptr = rcu_dereference_sched((tp)->funcs);	\
-		if (it_func_ptr) {					\
-			do {						\
-				it_func = (it_func_ptr)->func;		\
-				__data = (it_func_ptr)->data;		\
-				((void(*)(proto))(it_func))(args);	\
-			} while ((++it_func_ptr)->func);		\
-		}							\
-		rcu_read_unlock_sched_notrace();			\
-		postrcu;						\
-	} while (0)
-
-/*
- * Make sure the alignment of the structure in the __tracepoints section will
- * not add unwanted padding between the beginning of the section and the
- * structure. Force alignment to the same alignment as the section start.
- */
-#define __DECLARE_TRACE(name, proto, args, cond, data_proto, data_args) \
-	extern struct tracepoint __tracepoint_##name;			\
-	static inline void trace_##name(proto)				\
-	{								\
-		if (static_key_false(&__tracepoint_##name.key))		\
-			__DO_TRACE(&__tracepoint_##name,		\
-				TP_PROTO(data_proto),			\
-				TP_ARGS(data_args),			\
-				TP_CONDITION(cond),,);			\
-	}								\
-	static inline void trace_##name##_rcuidle(proto)		\
-	{								\
-		if (static_branch(&__tracepoint_##name.key))		\
-			__DO_TRACE(&__tracepoint_##name,		\
-				TP_PROTO(data_proto),			\
-				TP_ARGS(data_args),			\
-				TP_CONDITION(cond),			\
-				rcu_idle_exit(),			\
-				rcu_idle_enter());			\
-	}								\
-	static inline int						\
-	register_trace_##name(void (*probe)(data_proto), void *data)	\
-	{								\
-		return tracepoint_probe_register(#name, (void *)probe,	\
-						 data);			\
-	}								\
-	static inline int						\
-	unregister_trace_##name(void (*probe)(data_proto), void *data)	\
-	{								\
-		return tracepoint_probe_unregister(#name, (void *)probe, \
-						   data);		\
-	}								\
-	static inline void						\
-	check_trace_callback_type_##name(void (*cb)(data_proto))	\
-	{								\
-	}
-
-/*
- * We have no guarantee that gcc and the linker won't up-align the tracepoint
- * structures, so we create an array of pointers that will be used for iteration
- * on the tracepoints.
- */
-#define DEFINE_TRACE_FN(name, reg, unreg)				 \
-	static const char __tpstrtab_##name[]				 \
-	__attribute__((section("__tracepoints_strings"))) = #name;	 \
-	struct tracepoint __tracepoint_##name				 \
-	__attribute__((section("__tracepoints"))) =			 \
-		{ __tpstrtab_##name, STATIC_KEY_INIT_FALSE, reg, unreg, NULL };\
-	static struct tracepoint * const __tracepoint_ptr_##name __used	 \
-	__attribute__((section("__tracepoints_ptrs"))) =		 \
-		&__tracepoint_##name;
-
-#define DEFINE_TRACE(name)						\
-	DEFINE_TRACE_FN(name, NULL, NULL);
-
-#define EXPORT_TRACEPOINT_SYMBOL_GPL(name)				\
-	EXPORT_SYMBOL_GPL(__tracepoint_##name)
-#define EXPORT_TRACEPOINT_SYMBOL(name)					\
-	EXPORT_SYMBOL(__tracepoint_##name)
-
-#else /* !CONFIG_TRACEPOINTS */
-#define __DECLARE_TRACE(name, proto, args, cond, data_proto, data_args) \
-	static inline void trace_##name(proto)				\
-	{ }								\
-	static inline void trace_##name##_rcuidle(proto)		\
-	{ }								\
-	static inline int						\
-	register_trace_##name(void (*probe)(data_proto),		\
-			      void *data)				\
-	{								\
-		return -ENOSYS;						\
-	}								\
-	static inline int						\
-	unregister_trace_##name(void (*probe)(data_proto),		\
-				void *data)				\
-	{								\
-		return -ENOSYS;						\
-	}								\
-	static inline void check_trace_callback_type_##name(void (*cb)(data_proto)) \
-	{								\
-	}
-
-#define DEFINE_TRACE_FN(name, reg, unreg)
-#define DEFINE_TRACE(name)
-#define EXPORT_TRACEPOINT_SYMBOL_GPL(name)
-#define EXPORT_TRACEPOINT_SYMBOL(name)
-
-#endif /* CONFIG_TRACEPOINTS */
-
-/*
- * The need for the DECLARE_TRACE_NOARGS() is to handle the prototype
- * (void). "void" is a special value in a function prototype and can
- * not be combined with other arguments. Since the DECLARE_TRACE()
- * macro adds a data element at the beginning of the prototype,
- * we need a way to differentiate "(void *data, proto)" from
- * "(void *data, void)". The second prototype is invalid.
- *
- * DECLARE_TRACE_NOARGS() passes "void" as the tracepoint prototype
- * and "void *__data" as the callback prototype.
- *
- * DECLARE_TRACE() passes "proto" as the tracepoint protoype and
- * "void *__data, proto" as the callback prototype.
- */
-#define DECLARE_TRACE_NOARGS(name)					\
-		__DECLARE_TRACE(name, void, , 1, void *__data, __data)
-
-#define DECLARE_TRACE(name, proto, args)				\
-		__DECLARE_TRACE(name, PARAMS(proto), PARAMS(args), 1,	\
-				PARAMS(void *__data, proto),		\
-				PARAMS(__data, args))
-
-#define DECLARE_TRACE_CONDITION(name, proto, args, cond)		\
-	__DECLARE_TRACE(name, PARAMS(proto), PARAMS(args), PARAMS(cond), \
-			PARAMS(void *__data, proto),			\
-			PARAMS(__data, args))
-
-#define TRACE_EVENT_FLAGS(event, flag)
-
-#endif /* DECLARE_TRACE */
-
-#ifndef TRACE_EVENT
-/*
- * For use with the TRACE_EVENT macro:
- *
- * We define a tracepoint, its arguments, its printk format
- * and its 'fast binay record' layout.
- *
- * Firstly, name your tracepoint via TRACE_EVENT(name : the
- * 'subsystem_event' notation is fine.
- *
- * Think about this whole construct as the
- * 'trace_sched_switch() function' from now on.
- *
- *
- *  TRACE_EVENT(sched_switch,
- *
- *	*
- *	* A function has a regular function arguments
- *	* prototype, declare it via TP_PROTO():
- *	*
- *
- *	TP_PROTO(struct rq *rq, struct task_struct *prev,
- *		 struct task_struct *next),
- *
- *	*
- *	* Define the call signature of the 'function'.
- *	* (Design sidenote: we use this instead of a
- *	*  TP_PROTO1/TP_PROTO2/TP_PROTO3 ugliness.)
- *	*
- *
- *	TP_ARGS(rq, prev, next),
- *
- *	*
- *	* Fast binary tracing: define the trace record via
- *	* TP_STRUCT__entry(). You can think about it like a
- *	* regular C structure local variable definition.
- *	*
- *	* This is how the trace record is structured and will
- *	* be saved into the ring buffer. These are the fields
- *	* that will be exposed to user-space in
- *	* /sys/kernel/debug/tracing/events/<*>/format.
- *	*
- *	* The declared 'local variable' is called '__entry'
- *	*
- *	* __field(pid_t, prev_prid) is equivalent to a standard declariton:
- *	*
- *	*	pid_t	prev_pid;
- *	*
- *	* __array(char, prev_comm, TASK_COMM_LEN) is equivalent to:
- *	*
- *	*	char	prev_comm[TASK_COMM_LEN];
- *	*
- *
- *	TP_STRUCT__entry(
- *		__array(	char,	prev_comm,	TASK_COMM_LEN	)
- *		__field(	pid_t,	prev_pid			)
- *		__field(	int,	prev_prio			)
- *		__array(	char,	next_comm,	TASK_COMM_LEN	)
- *		__field(	pid_t,	next_pid			)
- *		__field(	int,	next_prio			)
- *	),
- *
- *	*
- *	* Assign the entry into the trace record, by embedding
- *	* a full C statement block into TP_fast_assign(). You
- *	* can refer to the trace record as '__entry' -
- *	* otherwise you can put arbitrary C code in here.
- *	*
- *	* Note: this C code will execute every time a trace event
- *	* happens, on an active tracepoint.
- *	*
- *
- *	TP_fast_assign(
- *		memcpy(__entry->next_comm, next->comm, TASK_COMM_LEN);
- *		__entry->prev_pid	= prev->pid;
- *		__entry->prev_prio	= prev->prio;
- *		memcpy(__entry->prev_comm, prev->comm, TASK_COMM_LEN);
- *		__entry->next_pid	= next->pid;
- *		__entry->next_prio	= next->prio;
- *	),
- *
- *	*
- *	* Formatted output of a trace record via TP_printk().
- *	* This is how the tracepoint will appear under ftrace
- *	* plugins that make use of this tracepoint.
- *	*
- *	* (raw-binary tracing wont actually perform this step.)
- *	*
- *
- *	TP_printk("task %s:%d [%d] ==> %s:%d [%d]",
- *		__entry->prev_comm, __entry->prev_pid, __entry->prev_prio,
- *		__entry->next_comm, __entry->next_pid, __entry->next_prio),
- *
- * );
- *
- * This macro construct is thus used for the regular printk format
- * tracing setup, it is used to construct a function pointer based
- * tracepoint callback (this is used by programmatic plugins and
- * can also by used by generic instrumentation like SystemTap), and
- * it is also used to expose a structured trace record in
- * /sys/kernel/debug/tracing/events/.
- *
- * A set of (un)registration functions can be passed to the variant
- * TRACE_EVENT_FN to perform any (un)registration work.
- */
-
-#define DECLARE_EVENT_CLASS(name, proto, args, tstruct, assign, print)
-#define DEFINE_EVENT(template, name, proto, args)		\
-	DECLARE_TRACE(name, PARAMS(proto), PARAMS(args))
-#define DEFINE_EVENT_PRINT(template, name, proto, args, print)	\
-	DECLARE_TRACE(name, PARAMS(proto), PARAMS(args))
-#define DEFINE_EVENT_CONDITION(template, name, proto,		\
-			       args, cond)			\
-	DECLARE_TRACE_CONDITION(name, PARAMS(proto),		\
-				PARAMS(args), PARAMS(cond))
-
-#define TRACE_EVENT(name, proto, args, struct, assign, print)	\
-	DECLARE_TRACE(name, PARAMS(proto), PARAMS(args))
-#define TRACE_EVENT_FN(name, proto, args, struct,		\
-		assign, print, reg, unreg)			\
-	DECLARE_TRACE(name, PARAMS(proto), PARAMS(args))
-#define TRACE_EVENT_CONDITION(name, proto, args, cond,		\
-			      struct, assign, print)		\
-	DECLARE_TRACE_CONDITION(name, PARAMS(proto),		\
-				PARAMS(args), PARAMS(cond))
-
-#define TRACE_EVENT_FLAGS(event, flag)
-
-#endif /* ifdef TRACE_EVENT (see note above) */
diff --git a/ANDROID_3.4.5/include/linux/transport_class.h b/ANDROID_3.4.5/include/linux/transport_class.h
deleted file mode 100644
index 11087cdd..00000000
--- a/ANDROID_3.4.5/include/linux/transport_class.h
+++ /dev/null
@@ -1,102 +0,0 @@
-/*
- * transport_class.h - a generic container for all transport classes
- *
- * Copyright (c) 2005 - James Bottomley <James.Bottomley@steeleye.com>
- *
- * This file is licensed under GPLv2
- */
-
-#ifndef _TRANSPORT_CLASS_H_
-#define _TRANSPORT_CLASS_H_
-
-#include <linux/device.h>
-#include <linux/bug.h>
-#include <linux/attribute_container.h>
-
-struct transport_container;
-
-struct transport_class {
-	struct class class;
-	int (*setup)(struct transport_container *, struct device *,
-		     struct device *);
-	int (*configure)(struct transport_container *, struct device *,
-			 struct device *);
-	int (*remove)(struct transport_container *, struct device *,
-		      struct device *);
-};
-
-#define DECLARE_TRANSPORT_CLASS(cls, nm, su, rm, cfg)			\
-struct transport_class cls = {						\
-	.class = {							\
-		.name = nm,						\
-	},								\
-	.setup = su,							\
-	.remove = rm,							\
-	.configure = cfg,						\
-}
-
-
-struct anon_transport_class {
-	struct transport_class tclass;
-	struct attribute_container container;
-};
-
-#define DECLARE_ANON_TRANSPORT_CLASS(cls, mtch, cfg)		\
-struct anon_transport_class cls = {				\
-	.tclass = {						\
-		.configure = cfg,				\
-	},							\
-	. container = {						\
-		.match = mtch,					\
-	},							\
-}
-
-#define class_to_transport_class(x) \
-	container_of(x, struct transport_class, class)
-
-struct transport_container {
-	struct attribute_container ac;
-	const struct attribute_group *statistics;
-};
-
-#define attribute_container_to_transport_container(x) \
-	container_of(x, struct transport_container, ac)
-
-void transport_remove_device(struct device *);
-void transport_add_device(struct device *);
-void transport_setup_device(struct device *);
-void transport_configure_device(struct device *);
-void transport_destroy_device(struct device *);
-
-static inline void
-transport_register_device(struct device *dev)
-{
-	transport_setup_device(dev);
-	transport_add_device(dev);
-}
-
-static inline void
-transport_unregister_device(struct device *dev)
-{
-	transport_remove_device(dev);
-	transport_destroy_device(dev);
-}
-
-static inline int transport_container_register(struct transport_container *tc)
-{
-	return attribute_container_register(&tc->ac);
-}
-
-static inline void transport_container_unregister(struct transport_container *tc)
-{
-	if (unlikely(attribute_container_unregister(&tc->ac)))
-		BUG();
-}
-
-int transport_class_register(struct transport_class *);
-int anon_transport_class_register(struct anon_transport_class *);
-void transport_class_unregister(struct transport_class *);
-void anon_transport_class_unregister(struct anon_transport_class *);
-
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/trdevice.h b/ANDROID_3.4.5/include/linux/trdevice.h
deleted file mode 100644
index bfc84a7a..00000000
--- a/ANDROID_3.4.5/include/linux/trdevice.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * INET		An implementation of the TCP/IP protocol suite for the LINUX
- *		operating system.  NET  is implemented using the  BSD Socket
- *		interface as the means of communication with the user level.
- *
- *		Definitions for the Token-ring handlers.
- *
- * Version:	@(#)eth.h	1.0.4	05/13/93
- *
- * Authors:	Ross Biro
- *		Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
- *
- *		Relocated to include/linux where it belongs by Alan Cox 
- *							<gw4pts@gw4pts.ampr.org>
- *
- *		This program is free software; you can redistribute it and/or
- *		modify it under the terms of the GNU General Public License
- *		as published by the Free Software Foundation; either version
- *		2 of the License, or (at your option) any later version.
- *
- *	WARNING: This move may well be temporary. This file will get merged with others RSN.
- *
- */
-#ifndef _LINUX_TRDEVICE_H
-#define _LINUX_TRDEVICE_H
-
-
-#include <linux/if_tr.h>
-
-#ifdef __KERNEL__
-extern __be16 tr_type_trans(struct sk_buff *skb, struct net_device *dev);
-extern void tr_source_route(struct sk_buff *skb, struct trh_hdr *trh, struct net_device *dev);
-extern struct net_device *alloc_trdev(int sizeof_priv);
-
-#endif
-
-#endif	/* _LINUX_TRDEVICE_H */
diff --git a/ANDROID_3.4.5/include/linux/tsacct_kern.h b/ANDROID_3.4.5/include/linux/tsacct_kern.h
deleted file mode 100644
index 7e50ac79..00000000
--- a/ANDROID_3.4.5/include/linux/tsacct_kern.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * tsacct_kern.h - kernel header for system accounting over taskstats interface
- *
- * Copyright (C) Jay Lan	SGI
- */
-
-#ifndef _LINUX_TSACCT_KERN_H
-#define _LINUX_TSACCT_KERN_H
-
-#include <linux/taskstats.h>
-
-#ifdef CONFIG_TASKSTATS
-extern void bacct_add_tsk(struct taskstats *stats, struct task_struct *tsk);
-#else
-static inline void bacct_add_tsk(struct taskstats *stats, struct task_struct *tsk)
-{}
-#endif /* CONFIG_TASKSTATS */
-
-#ifdef CONFIG_TASK_XACCT
-extern void xacct_add_tsk(struct taskstats *stats, struct task_struct *p);
-extern void acct_update_integrals(struct task_struct *tsk);
-extern void acct_clear_integrals(struct task_struct *tsk);
-#else
-static inline void xacct_add_tsk(struct taskstats *stats, struct task_struct *p)
-{}
-static inline void acct_update_integrals(struct task_struct *tsk)
-{}
-static inline void acct_clear_integrals(struct task_struct *tsk)
-{}
-#endif /* CONFIG_TASK_XACCT */
-
-#endif
-
-
diff --git a/ANDROID_3.4.5/include/linux/tty.h b/ANDROID_3.4.5/include/linux/tty.h
deleted file mode 100644
index 9f47ab54..00000000
--- a/ANDROID_3.4.5/include/linux/tty.h
+++ /dev/null
@@ -1,672 +0,0 @@
-#ifndef _LINUX_TTY_H
-#define _LINUX_TTY_H
-
-/*
- * 'tty.h' defines some structures used by tty_io.c and some defines.
- */
-
-#define NR_LDISCS		30
-
-/* line disciplines */
-#define N_TTY		0
-#define N_SLIP		1
-#define N_MOUSE		2
-#define N_PPP		3
-#define N_STRIP		4
-#define N_AX25		5
-#define N_X25		6	/* X.25 async */
-#define N_6PACK		7
-#define N_MASC		8	/* Reserved for Mobitex module <kaz@cafe.net> */
-#define N_R3964		9	/* Reserved for Simatic R3964 module */
-#define N_PROFIBUS_FDL	10	/* Reserved for Profibus */
-#define N_IRDA		11	/* Linux IrDa - http://irda.sourceforge.net/ */
-#define N_SMSBLOCK	12	/* SMS block mode - for talking to GSM data */
-				/* cards about SMS messages */
-#define N_HDLC		13	/* synchronous HDLC */
-#define N_SYNC_PPP	14	/* synchronous PPP */
-#define N_HCI		15	/* Bluetooth HCI UART */
-#define N_GIGASET_M101	16	/* Siemens Gigaset M101 serial DECT adapter */
-#define N_SLCAN		17	/* Serial / USB serial CAN Adaptors */
-#define N_PPS		18	/* Pulse per Second */
-#define N_V253		19	/* Codec control over voice modem */
-#define N_CAIF		20      /* CAIF protocol for talking to modems */
-#define N_GSM0710	21	/* GSM 0710 Mux */
-#define N_TI_WL		22	/* for TI's WL BT, FM, GPS combo chips */
-#define N_TRACESINK	23	/* Trace data routing for MIPI P1149.7 */
-#define N_TRACEROUTER	24	/* Trace data routing for MIPI P1149.7 */
-
-#ifdef __KERNEL__
-#include <linux/fs.h>
-#include <linux/major.h>
-#include <linux/termios.h>
-#include <linux/workqueue.h>
-#include <linux/tty_driver.h>
-#include <linux/tty_ldisc.h>
-#include <linux/mutex.h>
-
-
-
-/*
- * (Note: the *_driver.minor_start values 1, 64, 128, 192 are
- * hardcoded at present.)
- */
-#define NR_UNIX98_PTY_DEFAULT	4096      /* Default maximum for Unix98 ptys */
-#define NR_UNIX98_PTY_RESERVE	1024	  /* Default reserve for main devpts */
-#define NR_UNIX98_PTY_MAX	(1 << MINORBITS) /* Absolute limit */
-
-/*
- * This character is the same as _POSIX_VDISABLE: it cannot be used as
- * a c_cc[] character, but indicates that a particular special character
- * isn't in use (eg VINTR has no character etc)
- */
-#define __DISABLED_CHAR '\0'
-
-struct tty_buffer {
-	struct tty_buffer *next;
-	char *char_buf_ptr;
-	unsigned char *flag_buf_ptr;
-	int used;
-	int size;
-	int commit;
-	int read;
-	/* Data points here */
-	unsigned long data[0];
-};
-
-/*
- * We default to dicing tty buffer allocations to this many characters
- * in order to avoid multiple page allocations. We know the size of
- * tty_buffer itself but it must also be taken into account that the
- * the buffer is 256 byte aligned. See tty_buffer_find for the allocation
- * logic this must match
- */
-
-#define TTY_BUFFER_PAGE	(((PAGE_SIZE - sizeof(struct tty_buffer)) / 2) & ~0xFF)
-
-
-struct tty_bufhead {
-	struct work_struct work;
-	spinlock_t lock;
-	struct tty_buffer *head;	/* Queue head */
-	struct tty_buffer *tail;	/* Active buffer */
-	struct tty_buffer *free;	/* Free queue head */
-	int memory_used;		/* Buffer space used excluding
-								free queue */
-};
-/*
- * When a break, frame error, or parity error happens, these codes are
- * stuffed into the flags buffer.
- */
-#define TTY_NORMAL	0
-#define TTY_BREAK	1
-#define TTY_FRAME	2
-#define TTY_PARITY	3
-#define TTY_OVERRUN	4
-
-#define INTR_CHAR(tty) ((tty)->termios->c_cc[VINTR])
-#define QUIT_CHAR(tty) ((tty)->termios->c_cc[VQUIT])
-#define ERASE_CHAR(tty) ((tty)->termios->c_cc[VERASE])
-#define KILL_CHAR(tty) ((tty)->termios->c_cc[VKILL])
-#define EOF_CHAR(tty) ((tty)->termios->c_cc[VEOF])
-#define TIME_CHAR(tty) ((tty)->termios->c_cc[VTIME])
-#define MIN_CHAR(tty) ((tty)->termios->c_cc[VMIN])
-#define SWTC_CHAR(tty) ((tty)->termios->c_cc[VSWTC])
-#define START_CHAR(tty) ((tty)->termios->c_cc[VSTART])
-#define STOP_CHAR(tty) ((tty)->termios->c_cc[VSTOP])
-#define SUSP_CHAR(tty) ((tty)->termios->c_cc[VSUSP])
-#define EOL_CHAR(tty) ((tty)->termios->c_cc[VEOL])
-#define REPRINT_CHAR(tty) ((tty)->termios->c_cc[VREPRINT])
-#define DISCARD_CHAR(tty) ((tty)->termios->c_cc[VDISCARD])
-#define WERASE_CHAR(tty) ((tty)->termios->c_cc[VWERASE])
-#define LNEXT_CHAR(tty)	((tty)->termios->c_cc[VLNEXT])
-#define EOL2_CHAR(tty) ((tty)->termios->c_cc[VEOL2])
-
-#define _I_FLAG(tty, f)	((tty)->termios->c_iflag & (f))
-#define _O_FLAG(tty, f)	((tty)->termios->c_oflag & (f))
-#define _C_FLAG(tty, f)	((tty)->termios->c_cflag & (f))
-#define _L_FLAG(tty, f)	((tty)->termios->c_lflag & (f))
-
-#define I_IGNBRK(tty)	_I_FLAG((tty), IGNBRK)
-#define I_BRKINT(tty)	_I_FLAG((tty), BRKINT)
-#define I_IGNPAR(tty)	_I_FLAG((tty), IGNPAR)
-#define I_PARMRK(tty)	_I_FLAG((tty), PARMRK)
-#define I_INPCK(tty)	_I_FLAG((tty), INPCK)
-#define I_ISTRIP(tty)	_I_FLAG((tty), ISTRIP)
-#define I_INLCR(tty)	_I_FLAG((tty), INLCR)
-#define I_IGNCR(tty)	_I_FLAG((tty), IGNCR)
-#define I_ICRNL(tty)	_I_FLAG((tty), ICRNL)
-#define I_IUCLC(tty)	_I_FLAG((tty), IUCLC)
-#define I_IXON(tty)	_I_FLAG((tty), IXON)
-#define I_IXANY(tty)	_I_FLAG((tty), IXANY)
-#define I_IXOFF(tty)	_I_FLAG((tty), IXOFF)
-#define I_IMAXBEL(tty)	_I_FLAG((tty), IMAXBEL)
-#define I_IUTF8(tty)	_I_FLAG((tty), IUTF8)
-
-#define O_OPOST(tty)	_O_FLAG((tty), OPOST)
-#define O_OLCUC(tty)	_O_FLAG((tty), OLCUC)
-#define O_ONLCR(tty)	_O_FLAG((tty), ONLCR)
-#define O_OCRNL(tty)	_O_FLAG((tty), OCRNL)
-#define O_ONOCR(tty)	_O_FLAG((tty), ONOCR)
-#define O_ONLRET(tty)	_O_FLAG((tty), ONLRET)
-#define O_OFILL(tty)	_O_FLAG((tty), OFILL)
-#define O_OFDEL(tty)	_O_FLAG((tty), OFDEL)
-#define O_NLDLY(tty)	_O_FLAG((tty), NLDLY)
-#define O_CRDLY(tty)	_O_FLAG((tty), CRDLY)
-#define O_TABDLY(tty)	_O_FLAG((tty), TABDLY)
-#define O_BSDLY(tty)	_O_FLAG((tty), BSDLY)
-#define O_VTDLY(tty)	_O_FLAG((tty), VTDLY)
-#define O_FFDLY(tty)	_O_FLAG((tty), FFDLY)
-
-#define C_BAUD(tty)	_C_FLAG((tty), CBAUD)
-#define C_CSIZE(tty)	_C_FLAG((tty), CSIZE)
-#define C_CSTOPB(tty)	_C_FLAG((tty), CSTOPB)
-#define C_CREAD(tty)	_C_FLAG((tty), CREAD)
-#define C_PARENB(tty)	_C_FLAG((tty), PARENB)
-#define C_PARODD(tty)	_C_FLAG((tty), PARODD)
-#define C_HUPCL(tty)	_C_FLAG((tty), HUPCL)
-#define C_CLOCAL(tty)	_C_FLAG((tty), CLOCAL)
-#define C_CIBAUD(tty)	_C_FLAG((tty), CIBAUD)
-#define C_CRTSCTS(tty)	_C_FLAG((tty), CRTSCTS)
-
-#define L_ISIG(tty)	_L_FLAG((tty), ISIG)
-#define L_ICANON(tty)	_L_FLAG((tty), ICANON)
-#define L_XCASE(tty)	_L_FLAG((tty), XCASE)
-#define L_ECHO(tty)	_L_FLAG((tty), ECHO)
-#define L_ECHOE(tty)	_L_FLAG((tty), ECHOE)
-#define L_ECHOK(tty)	_L_FLAG((tty), ECHOK)
-#define L_ECHONL(tty)	_L_FLAG((tty), ECHONL)
-#define L_NOFLSH(tty)	_L_FLAG((tty), NOFLSH)
-#define L_TOSTOP(tty)	_L_FLAG((tty), TOSTOP)
-#define L_ECHOCTL(tty)	_L_FLAG((tty), ECHOCTL)
-#define L_ECHOPRT(tty)	_L_FLAG((tty), ECHOPRT)
-#define L_ECHOKE(tty)	_L_FLAG((tty), ECHOKE)
-#define L_FLUSHO(tty)	_L_FLAG((tty), FLUSHO)
-#define L_PENDIN(tty)	_L_FLAG((tty), PENDIN)
-#define L_IEXTEN(tty)	_L_FLAG((tty), IEXTEN)
-#define L_EXTPROC(tty)	_L_FLAG((tty), EXTPROC)
-
-struct device;
-struct signal_struct;
-
-/*
- * Port level information. Each device keeps its own port level information
- * so provide a common structure for those ports wanting to use common support
- * routines.
- *
- * The tty port has a different lifetime to the tty so must be kept apart.
- * In addition be careful as tty -> port mappings are valid for the life
- * of the tty object but in many cases port -> tty mappings are valid only
- * until a hangup so don't use the wrong path.
- */
-
-struct tty_port;
-
-struct tty_port_operations {
-	/* Return 1 if the carrier is raised */
-	int (*carrier_raised)(struct tty_port *port);
-	/* Control the DTR line */
-	void (*dtr_rts)(struct tty_port *port, int raise);
-	/* Called when the last close completes or a hangup finishes
-	   IFF the port was initialized. Do not use to free resources. Called
-	   under the port mutex to serialize against activate/shutdowns */
-	void (*shutdown)(struct tty_port *port);
-	void (*drop)(struct tty_port *port);
-	/* Called under the port mutex from tty_port_open, serialized using
-	   the port mutex */
-        /* FIXME: long term getting the tty argument *out* of this would be
-           good for consoles */
-	int (*activate)(struct tty_port *port, struct tty_struct *tty);
-	/* Called on the final put of a port */
-	void (*destruct)(struct tty_port *port);
-};
-	
-struct tty_port {
-	struct tty_struct	*tty;		/* Back pointer */
-	const struct tty_port_operations *ops;	/* Port operations */
-	spinlock_t		lock;		/* Lock protecting tty field */
-	int			blocked_open;	/* Waiting to open */
-	int			count;		/* Usage count */
-	wait_queue_head_t	open_wait;	/* Open waiters */
-	wait_queue_head_t	close_wait;	/* Close waiters */
-	wait_queue_head_t	delta_msr_wait;	/* Modem status change */
-	unsigned long		flags;		/* TTY flags ASY_*/
-	unsigned char		console:1;	/* port is a console */
-	struct mutex		mutex;		/* Locking */
-	struct mutex		buf_mutex;	/* Buffer alloc lock */
-	unsigned char		*xmit_buf;	/* Optional buffer */
-	unsigned int		close_delay;	/* Close port delay */
-	unsigned int		closing_wait;	/* Delay for output */
-	int			drain_delay;	/* Set to zero if no pure time
-						   based drain is needed else
-						   set to size of fifo */
-	struct kref		kref;		/* Ref counter */
-};
-
-/*
- * Where all of the state associated with a tty is kept while the tty
- * is open.  Since the termios state should be kept even if the tty
- * has been closed --- for things like the baud rate, etc --- it is
- * not stored here, but rather a pointer to the real state is stored
- * here.  Possible the winsize structure should have the same
- * treatment, but (1) the default 80x24 is usually right and (2) it's
- * most often used by a windowing system, which will set the correct
- * size each time the window is created or resized anyway.
- * 						- TYT, 9/14/92
- */
-
-struct tty_operations;
-
-struct tty_struct {
-	int	magic;
-	struct kref kref;
-	struct device *dev;
-	struct tty_driver *driver;
-	const struct tty_operations *ops;
-	int index;
-
-	/* Protects ldisc changes: Lock tty not pty */
-	struct mutex ldisc_mutex;
-	struct tty_ldisc *ldisc;
-
-	struct mutex termios_mutex;
-	spinlock_t ctrl_lock;
-	/* Termios values are protected by the termios mutex */
-	struct ktermios *termios, *termios_locked;
-	struct termiox *termiox;	/* May be NULL for unsupported */
-	char name[64];
-	struct pid *pgrp;		/* Protected by ctrl lock */
-	struct pid *session;
-	unsigned long flags;
-	int count;
-	struct winsize winsize;		/* termios mutex */
-	unsigned char stopped:1, hw_stopped:1, flow_stopped:1, packet:1;
-	unsigned char low_latency:1, warned:1;
-	unsigned char ctrl_status;	/* ctrl_lock */
-	unsigned int receive_room;	/* Bytes free for queue */
-
-	struct tty_struct *link;
-	struct fasync_struct *fasync;
-	struct tty_bufhead buf;		/* Locked internally */
-	int alt_speed;		/* For magic substitution of 38400 bps */
-	wait_queue_head_t write_wait;
-	wait_queue_head_t read_wait;
-	struct work_struct hangup_work;
-	void *disc_data;
-	void *driver_data;
-	struct list_head tty_files;
-
-#define N_TTY_BUF_SIZE 4096
-
-	/*
-	 * The following is data for the N_TTY line discipline.  For
-	 * historical reasons, this is included in the tty structure.
-	 * Mostly locked by the BKL.
-	 */
-	unsigned int column;
-	unsigned char lnext:1, erasing:1, raw:1, real_raw:1, icanon:1;
-	unsigned char closing:1;
-	unsigned char echo_overrun:1;
-	unsigned short minimum_to_wake;
-	unsigned long overrun_time;
-	int num_overrun;
-	unsigned long process_char_map[256/(8*sizeof(unsigned long))];
-	char *read_buf;
-	int read_head;
-	int read_tail;
-	int read_cnt;
-	unsigned long read_flags[N_TTY_BUF_SIZE/(8*sizeof(unsigned long))];
-	unsigned char *echo_buf;
-	unsigned int echo_pos;
-	unsigned int echo_cnt;
-	int canon_data;
-	unsigned long canon_head;
-	unsigned int canon_column;
-	struct mutex atomic_read_lock;
-	struct mutex atomic_write_lock;
-	struct mutex output_lock;
-	struct mutex echo_lock;
-	unsigned char *write_buf;
-	int write_cnt;
-	spinlock_t read_lock;
-	/* If the tty has a pending do_SAK, queue it here - akpm */
-	struct work_struct SAK_work;
-	struct tty_port *port;
-};
-
-/* Each of a tty's open files has private_data pointing to tty_file_private */
-struct tty_file_private {
-	struct tty_struct *tty;
-	struct file *file;
-	struct list_head list;
-};
-
-/* tty magic number */
-#define TTY_MAGIC		0x5401
-
-/*
- * These bits are used in the flags field of the tty structure.
- *
- * So that interrupts won't be able to mess up the queues,
- * copy_to_cooked must be atomic with respect to itself, as must
- * tty->write.  Thus, you must use the inline functions set_bit() and
- * clear_bit() to make things atomic.
- */
-#define TTY_THROTTLED 		0	/* Call unthrottle() at threshold min */
-#define TTY_IO_ERROR 		1	/* Cause an I/O error (may be no ldisc too) */
-#define TTY_OTHER_CLOSED 	2	/* Other side (if any) has closed */
-#define TTY_EXCLUSIVE 		3	/* Exclusive open mode */
-#define TTY_DEBUG 		4	/* Debugging */
-#define TTY_DO_WRITE_WAKEUP 	5	/* Call write_wakeup after queuing new */
-#define TTY_PUSH 		6	/* n_tty private */
-#define TTY_CLOSING 		7	/* ->close() in progress */
-#define TTY_LDISC 		9	/* Line discipline attached */
-#define TTY_LDISC_CHANGING 	10	/* Line discipline changing */
-#define TTY_LDISC_OPEN	 	11	/* Line discipline is open */
-#define TTY_HW_COOK_OUT 	14	/* Hardware can do output cooking */
-#define TTY_HW_COOK_IN 		15	/* Hardware can do input cooking */
-#define TTY_PTY_LOCK 		16	/* pty private */
-#define TTY_NO_WRITE_SPLIT 	17	/* Preserve write boundaries to driver */
-#define TTY_HUPPED 		18	/* Post driver->hangup() */
-#define TTY_FLUSHING		19	/* Flushing to ldisc in progress */
-#define TTY_FLUSHPENDING	20	/* Queued buffer flush pending */
-#define TTY_HUPPING 		21	/* ->hangup() in progress */
-
-#define TTY_WRITE_FLUSH(tty) tty_write_flush((tty))
-
-extern void tty_write_flush(struct tty_struct *);
-
-extern struct ktermios tty_std_termios;
-
-extern void console_init(void);
-extern int vcs_init(void);
-
-extern struct class *tty_class;
-
-/**
- *	tty_kref_get		-	get a tty reference
- *	@tty: tty device
- *
- *	Return a new reference to a tty object. The caller must hold
- *	sufficient locks/counts to ensure that their existing reference cannot
- *	go away
- */
-
-static inline struct tty_struct *tty_kref_get(struct tty_struct *tty)
-{
-	if (tty)
-		kref_get(&tty->kref);
-	return tty;
-}
-extern void tty_kref_put(struct tty_struct *tty);
-
-extern int tty_paranoia_check(struct tty_struct *tty, struct inode *inode,
-			      const char *routine);
-extern char *tty_name(struct tty_struct *tty, char *buf);
-extern void tty_wait_until_sent(struct tty_struct *tty, long timeout);
-extern int tty_check_change(struct tty_struct *tty);
-extern void stop_tty(struct tty_struct *tty);
-extern void start_tty(struct tty_struct *tty);
-extern int tty_register_driver(struct tty_driver *driver);
-extern int tty_unregister_driver(struct tty_driver *driver);
-extern struct device *tty_register_device(struct tty_driver *driver,
-					  unsigned index, struct device *dev);
-extern void tty_unregister_device(struct tty_driver *driver, unsigned index);
-extern int tty_read_raw_data(struct tty_struct *tty, unsigned char *bufp,
-			     int buflen);
-extern void tty_write_message(struct tty_struct *tty, char *msg);
-extern int tty_put_char(struct tty_struct *tty, unsigned char c);
-extern int tty_chars_in_buffer(struct tty_struct *tty);
-extern int tty_write_room(struct tty_struct *tty);
-extern void tty_driver_flush_buffer(struct tty_struct *tty);
-extern void tty_throttle(struct tty_struct *tty);
-extern void tty_unthrottle(struct tty_struct *tty);
-extern int tty_do_resize(struct tty_struct *tty, struct winsize *ws);
-extern void tty_driver_remove_tty(struct tty_driver *driver,
-				  struct tty_struct *tty);
-extern void tty_shutdown(struct tty_struct *tty);
-extern void tty_free_termios(struct tty_struct *tty);
-extern int is_current_pgrp_orphaned(void);
-extern struct pid *tty_get_pgrp(struct tty_struct *tty);
-extern int is_ignored(int sig);
-extern int tty_signal(int sig, struct tty_struct *tty);
-extern void tty_hangup(struct tty_struct *tty);
-extern void tty_vhangup(struct tty_struct *tty);
-extern void tty_vhangup_locked(struct tty_struct *tty);
-extern void tty_vhangup_self(void);
-extern void tty_unhangup(struct file *filp);
-extern int tty_hung_up_p(struct file *filp);
-extern void do_SAK(struct tty_struct *tty);
-extern void __do_SAK(struct tty_struct *tty);
-extern void disassociate_ctty(int priv);
-extern void no_tty(void);
-extern void tty_flip_buffer_push(struct tty_struct *tty);
-extern void tty_flush_to_ldisc(struct tty_struct *tty);
-extern void tty_buffer_free_all(struct tty_struct *tty);
-extern void tty_buffer_flush(struct tty_struct *tty);
-extern void tty_buffer_init(struct tty_struct *tty);
-extern speed_t tty_get_baud_rate(struct tty_struct *tty);
-extern speed_t tty_termios_baud_rate(struct ktermios *termios);
-extern speed_t tty_termios_input_baud_rate(struct ktermios *termios);
-extern void tty_termios_encode_baud_rate(struct ktermios *termios,
-						speed_t ibaud, speed_t obaud);
-extern void tty_encode_baud_rate(struct tty_struct *tty,
-						speed_t ibaud, speed_t obaud);
-extern void tty_termios_copy_hw(struct ktermios *new, struct ktermios *old);
-extern int tty_termios_hw_change(struct ktermios *a, struct ktermios *b);
-extern int tty_set_termios(struct tty_struct *tty, struct ktermios *kt);
-
-extern struct tty_ldisc *tty_ldisc_ref(struct tty_struct *);
-extern void tty_ldisc_deref(struct tty_ldisc *);
-extern struct tty_ldisc *tty_ldisc_ref_wait(struct tty_struct *);
-extern void tty_ldisc_hangup(struct tty_struct *tty);
-extern const struct file_operations tty_ldiscs_proc_fops;
-
-extern void tty_wakeup(struct tty_struct *tty);
-extern void tty_ldisc_flush(struct tty_struct *tty);
-
-extern long tty_ioctl(struct file *file, unsigned int cmd, unsigned long arg);
-extern int tty_mode_ioctl(struct tty_struct *tty, struct file *file,
-			unsigned int cmd, unsigned long arg);
-extern int tty_perform_flush(struct tty_struct *tty, unsigned long arg);
-extern dev_t tty_devnum(struct tty_struct *tty);
-extern void proc_clear_tty(struct task_struct *p);
-extern struct tty_struct *get_current_tty(void);
-extern void tty_default_fops(struct file_operations *fops);
-extern struct tty_struct *alloc_tty_struct(void);
-extern int tty_alloc_file(struct file *file);
-extern void tty_add_file(struct tty_struct *tty, struct file *file);
-extern void tty_free_file(struct file *file);
-extern void free_tty_struct(struct tty_struct *tty);
-extern void initialize_tty_struct(struct tty_struct *tty,
-		struct tty_driver *driver, int idx);
-extern void deinitialize_tty_struct(struct tty_struct *tty);
-extern struct tty_struct *tty_init_dev(struct tty_driver *driver, int idx);
-extern int tty_release(struct inode *inode, struct file *filp);
-extern int tty_init_termios(struct tty_struct *tty);
-extern int tty_standard_install(struct tty_driver *driver,
-		struct tty_struct *tty);
-
-extern struct tty_struct *tty_pair_get_tty(struct tty_struct *tty);
-extern struct tty_struct *tty_pair_get_pty(struct tty_struct *tty);
-
-extern struct mutex tty_mutex;
-extern spinlock_t tty_files_lock;
-
-extern void tty_write_unlock(struct tty_struct *tty);
-extern int tty_write_lock(struct tty_struct *tty, int ndelay);
-#define tty_is_writelocked(tty)  (mutex_is_locked(&tty->atomic_write_lock))
-
-extern void tty_port_init(struct tty_port *port);
-extern int tty_port_alloc_xmit_buf(struct tty_port *port);
-extern void tty_port_free_xmit_buf(struct tty_port *port);
-extern void tty_port_put(struct tty_port *port);
-
-static inline struct tty_port *tty_port_get(struct tty_port *port)
-{
-	if (port)
-		kref_get(&port->kref);
-	return port;
-}
-
-extern struct tty_struct *tty_port_tty_get(struct tty_port *port);
-extern void tty_port_tty_set(struct tty_port *port, struct tty_struct *tty);
-extern int tty_port_carrier_raised(struct tty_port *port);
-extern void tty_port_raise_dtr_rts(struct tty_port *port);
-extern void tty_port_lower_dtr_rts(struct tty_port *port);
-extern void tty_port_hangup(struct tty_port *port);
-extern int tty_port_block_til_ready(struct tty_port *port,
-				struct tty_struct *tty, struct file *filp);
-extern int tty_port_close_start(struct tty_port *port,
-				struct tty_struct *tty, struct file *filp);
-extern void tty_port_close_end(struct tty_port *port, struct tty_struct *tty);
-extern void tty_port_close(struct tty_port *port,
-				struct tty_struct *tty, struct file *filp);
-extern int tty_port_open(struct tty_port *port,
-				struct tty_struct *tty, struct file *filp);
-static inline int tty_port_users(struct tty_port *port)
-{
-	return port->count + port->blocked_open;
-}
-
-extern int tty_register_ldisc(int disc, struct tty_ldisc_ops *new_ldisc);
-extern int tty_unregister_ldisc(int disc);
-extern int tty_set_ldisc(struct tty_struct *tty, int ldisc);
-extern int tty_ldisc_setup(struct tty_struct *tty, struct tty_struct *o_tty);
-extern void tty_ldisc_release(struct tty_struct *tty, struct tty_struct *o_tty);
-extern void tty_ldisc_init(struct tty_struct *tty);
-extern void tty_ldisc_deinit(struct tty_struct *tty);
-extern void tty_ldisc_begin(void);
-/* This last one is just for the tty layer internals and shouldn't be used elsewhere */
-extern void tty_ldisc_enable(struct tty_struct *tty);
-
-
-/* n_tty.c */
-extern struct tty_ldisc_ops tty_ldisc_N_TTY;
-extern void n_tty_inherit_ops(struct tty_ldisc_ops *ops);
-
-/* tty_audit.c */
-#ifdef CONFIG_AUDIT
-extern void tty_audit_add_data(struct tty_struct *tty, unsigned char *data,
-			       size_t size);
-extern void tty_audit_exit(void);
-extern void tty_audit_fork(struct signal_struct *sig);
-extern void tty_audit_tiocsti(struct tty_struct *tty, char ch);
-extern void tty_audit_push(struct tty_struct *tty);
-extern int tty_audit_push_task(struct task_struct *tsk,
-			       uid_t loginuid, u32 sessionid);
-#else
-static inline void tty_audit_add_data(struct tty_struct *tty,
-				      unsigned char *data, size_t size)
-{
-}
-static inline void tty_audit_tiocsti(struct tty_struct *tty, char ch)
-{
-}
-static inline void tty_audit_exit(void)
-{
-}
-static inline void tty_audit_fork(struct signal_struct *sig)
-{
-}
-static inline void tty_audit_push(struct tty_struct *tty)
-{
-}
-static inline int tty_audit_push_task(struct task_struct *tsk,
-				      uid_t loginuid, u32 sessionid)
-{
-	return 0;
-}
-#endif
-
-/* tty_io.c */
-extern int __init tty_init(void);
-
-/* tty_ioctl.c */
-extern int n_tty_ioctl_helper(struct tty_struct *tty, struct file *file,
-		       unsigned int cmd, unsigned long arg);
-extern long n_tty_compat_ioctl_helper(struct tty_struct *tty, struct file *file,
-		       unsigned int cmd, unsigned long arg);
-
-/* serial.c */
-
-extern void serial_console_init(void);
-
-/* pcxx.c */
-
-extern int pcxe_open(struct tty_struct *tty, struct file *filp);
-
-/* vt.c */
-
-extern int vt_ioctl(struct tty_struct *tty,
-		    unsigned int cmd, unsigned long arg);
-
-extern long vt_compat_ioctl(struct tty_struct *tty,
-		     unsigned int cmd, unsigned long arg);
-
-/* tty_mutex.c */
-/* functions for preparation of BKL removal */
-extern void __lockfunc tty_lock(void) __acquires(tty_lock);
-extern void __lockfunc tty_unlock(void) __releases(tty_lock);
-
-/*
- * this shall be called only from where BTM is held (like close)
- *
- * We need this to ensure nobody waits for us to finish while we are waiting.
- * Without this we were encountering system stalls.
- *
- * This should be indeed removed with BTM removal later.
- *
- * Locking: BTM required. Nobody is allowed to hold port->mutex.
- */
-static inline void tty_wait_until_sent_from_close(struct tty_struct *tty,
-		long timeout)
-{
-	tty_unlock(); /* tty->ops->close holds the BTM, drop it while waiting */
-	tty_wait_until_sent(tty, timeout);
-	tty_lock();
-}
-
-/*
- * wait_event_interruptible_tty -- wait for a condition with the tty lock held
- *
- * The condition we are waiting for might take a long time to
- * become true, or might depend on another thread taking the
- * BTM. In either case, we need to drop the BTM to guarantee
- * forward progress. This is a leftover from the conversion
- * from the BKL and should eventually get removed as the BTM
- * falls out of use.
- *
- * Do not use in new code.
- */
-#define wait_event_interruptible_tty(wq, condition)			\
-({									\
-	int __ret = 0;							\
-	if (!(condition)) {						\
-		__wait_event_interruptible_tty(wq, condition, __ret);	\
-	}								\
-	__ret;								\
-})
-
-#define __wait_event_interruptible_tty(wq, condition, ret)		\
-do {									\
-	DEFINE_WAIT(__wait);						\
-									\
-	for (;;) {							\
-		prepare_to_wait(&wq, &__wait, TASK_INTERRUPTIBLE);	\
-		if (condition)						\
-			break;						\
-		if (!signal_pending(current)) {				\
-			tty_unlock();					\
-			schedule();					\
-			tty_lock();					\
-			continue;					\
-		}							\
-		ret = -ERESTARTSYS;					\
-		break;							\
-	}								\
-	finish_wait(&wq, &__wait);					\
-} while (0)
-
-
-#endif /* __KERNEL__ */
-#endif
diff --git a/ANDROID_3.4.5/include/linux/tty_driver.h b/ANDROID_3.4.5/include/linux/tty_driver.h
deleted file mode 100644
index 6e6dbb74..00000000
--- a/ANDROID_3.4.5/include/linux/tty_driver.h
+++ /dev/null
@@ -1,412 +0,0 @@
-#ifndef _LINUX_TTY_DRIVER_H
-#define _LINUX_TTY_DRIVER_H
-
-/*
- * This structure defines the interface between the low-level tty
- * driver and the tty routines.  The following routines can be
- * defined; unless noted otherwise, they are optional, and can be
- * filled in with a null pointer.
- *
- * struct tty_struct * (*lookup)(struct tty_driver *self, int idx)
- *
- *	Return the tty device corresponding to idx, NULL if there is not
- *	one currently in use and an ERR_PTR value on error. Called under
- *	tty_mutex (for now!)
- *
- *	Optional method. Default behaviour is to use the ttys array
- *
- * int (*install)(struct tty_driver *self, struct tty_struct *tty)
- *
- *	Install a new tty into the tty driver internal tables. Used in
- *	conjunction with lookup and remove methods.
- *
- *	Optional method. Default behaviour is to use the ttys array
- *
- * void (*remove)(struct tty_driver *self, struct tty_struct *tty)
- *
- *	Remove a closed tty from the tty driver internal tables. Used in
- *	conjunction with lookup and remove methods.
- *
- *	Optional method. Default behaviour is to use the ttys array
- *
- * int  (*open)(struct tty_struct * tty, struct file * filp);
- *
- * 	This routine is called when a particular tty device is opened.
- * 	This routine is mandatory; if this routine is not filled in,
- * 	the attempted open will fail with ENODEV.
- *
- *	Required method.
- *     
- * void (*close)(struct tty_struct * tty, struct file * filp);
- *
- * 	This routine is called when a particular tty device is closed.
- *
- *	Required method.
- *
- * void (*shutdown)(struct tty_struct * tty);
- *
- * 	This routine is called synchronously when a particular tty device
- *	is closed for the last time freeing up the resources.
- *	Note that tty_shutdown() is not called if ops->shutdown is defined.
- *	This means one is responsible to take care of calling ops->remove (e.g.
- *	via tty_driver_remove_tty) and releasing tty->termios.
- *	Note that this hook may be called from *all* the contexts where one
- *	uses tty refcounting (e.g. tty_port_tty_get).
- *
- *
- * void (*cleanup)(struct tty_struct * tty);
- *
- *	This routine is called asynchronously when a particular tty device
- *	is closed for the last time freeing up the resources. This is
- *	actually the second part of shutdown for routines that might sleep.
- *
- *
- * int (*write)(struct tty_struct * tty,
- * 		 const unsigned char *buf, int count);
- *
- * 	This routine is called by the kernel to write a series of
- * 	characters to the tty device.  The characters may come from
- * 	user space or kernel space.  This routine will return the
- *	number of characters actually accepted for writing.
- *
- *	Optional: Required for writable devices.
- *
- * int (*put_char)(struct tty_struct *tty, unsigned char ch);
- *
- * 	This routine is called by the kernel to write a single
- * 	character to the tty device.  If the kernel uses this routine,
- * 	it must call the flush_chars() routine (if defined) when it is
- * 	done stuffing characters into the driver.  If there is no room
- * 	in the queue, the character is ignored.
- *
- *	Optional: Kernel will use the write method if not provided.
- *
- *	Note: Do not call this function directly, call tty_put_char
- *
- * void (*flush_chars)(struct tty_struct *tty);
- *
- * 	This routine is called by the kernel after it has written a
- * 	series of characters to the tty device using put_char().  
- *
- *	Optional:
- *
- *	Note: Do not call this function directly, call tty_driver_flush_chars
- * 
- * int  (*write_room)(struct tty_struct *tty);
- *
- * 	This routine returns the numbers of characters the tty driver
- * 	will accept for queuing to be written.  This number is subject
- * 	to change as output buffers get emptied, or if the output flow
- *	control is acted.
- *
- *	Required if write method is provided else not needed.
- *
- *	Note: Do not call this function directly, call tty_write_room
- * 
- * int  (*ioctl)(struct tty_struct *tty, unsigned int cmd, unsigned long arg);
- *
- * 	This routine allows the tty driver to implement
- *	device-specific ioctls.  If the ioctl number passed in cmd
- * 	is not recognized by the driver, it should return ENOIOCTLCMD.
- *
- *	Optional
- *
- * long (*compat_ioctl)(struct tty_struct *tty,,
- * 	                unsigned int cmd, unsigned long arg);
- *
- * 	implement ioctl processing for 32 bit process on 64 bit system
- *
- *	Optional
- * 
- * void (*set_termios)(struct tty_struct *tty, struct ktermios * old);
- *
- * 	This routine allows the tty driver to be notified when
- * 	device's termios settings have changed.
- *
- *	Optional: Called under the termios lock
- *
- *
- * void (*set_ldisc)(struct tty_struct *tty);
- *
- * 	This routine allows the tty driver to be notified when the
- * 	device's termios settings have changed.
- *
- *	Optional: Called under BKL (currently)
- * 
- * void (*throttle)(struct tty_struct * tty);
- *
- * 	This routine notifies the tty driver that input buffers for
- * 	the line discipline are close to full, and it should somehow
- * 	signal that no more characters should be sent to the tty.
- *
- *	Optional: Always invoke via tty_throttle(), called under the
- *	termios lock.
- * 
- * void (*unthrottle)(struct tty_struct * tty);
- *
- * 	This routine notifies the tty drivers that it should signals
- * 	that characters can now be sent to the tty without fear of
- * 	overrunning the input buffers of the line disciplines.
- * 
- *	Optional: Always invoke via tty_unthrottle(), called under the
- *	termios lock.
- *
- * void (*stop)(struct tty_struct *tty);
- *
- * 	This routine notifies the tty driver that it should stop
- * 	outputting characters to the tty device.  
- *
- *	Optional:
- *
- *	Note: Call stop_tty not this method.
- * 
- * void (*start)(struct tty_struct *tty);
- *
- * 	This routine notifies the tty driver that it resume sending
- *	characters to the tty device.
- *
- *	Optional:
- *
- *	Note: Call start_tty not this method.
- * 
- * void (*hangup)(struct tty_struct *tty);
- *
- * 	This routine notifies the tty driver that it should hang up the
- * 	tty device.
- *
- *	Optional:
- *
- * int (*break_ctl)(struct tty_struct *tty, int state);
- *
- * 	This optional routine requests the tty driver to turn on or
- * 	off BREAK status on the RS-232 port.  If state is -1,
- * 	then the BREAK status should be turned on; if state is 0, then
- * 	BREAK should be turned off.
- *
- * 	If this routine is implemented, the high-level tty driver will
- * 	handle the following ioctls: TCSBRK, TCSBRKP, TIOCSBRK,
- * 	TIOCCBRK.
- *
- *	If the driver sets TTY_DRIVER_HARDWARE_BREAK then the interface
- *	will also be called with actual times and the hardware is expected
- *	to do the delay work itself. 0 and -1 are still used for on/off.
- *
- *	Optional: Required for TCSBRK/BRKP/etc handling.
- *
- * void (*wait_until_sent)(struct tty_struct *tty, int timeout);
- * 
- * 	This routine waits until the device has written out all of the
- * 	characters in its transmitter FIFO.
- *
- *	Optional: If not provided the device is assumed to have no FIFO
- *
- *	Note: Usually correct to call tty_wait_until_sent
- *
- * void (*send_xchar)(struct tty_struct *tty, char ch);
- *
- * 	This routine is used to send a high-priority XON/XOFF
- * 	character to the device.
- *
- *	Optional: If not provided then the write method is called under
- *	the atomic write lock to keep it serialized with the ldisc.
- *
- * int (*resize)(struct tty_struct *tty, struct winsize *ws)
- *
- *	Called when a termios request is issued which changes the
- *	requested terminal geometry.
- *
- *	Optional: the default action is to update the termios structure
- *	without error. This is usually the correct behaviour. Drivers should
- *	not force errors here if they are not resizable objects (eg a serial
- *	line). See tty_do_resize() if you need to wrap the standard method
- *	in your own logic - the usual case.
- *
- * void (*set_termiox)(struct tty_struct *tty, struct termiox *new);
- *
- *	Called when the device receives a termiox based ioctl. Passes down
- *	the requested data from user space. This method will not be invoked
- *	unless the tty also has a valid tty->termiox pointer.
- *
- *	Optional: Called under the termios lock
- *
- * int (*get_icount)(struct tty_struct *tty, struct serial_icounter *icount);
- *
- *	Called when the device receives a TIOCGICOUNT ioctl. Passed a kernel
- *	structure to complete. This method is optional and will only be called
- *	if provided (otherwise EINVAL will be returned).
- */
-
-#include <linux/export.h>
-#include <linux/fs.h>
-#include <linux/list.h>
-#include <linux/cdev.h>
-#include <linux/termios.h>
-
-struct tty_struct;
-struct tty_driver;
-struct serial_icounter_struct;
-
-struct tty_operations {
-	struct tty_struct * (*lookup)(struct tty_driver *driver,
-			struct inode *inode, int idx);
-	int  (*install)(struct tty_driver *driver, struct tty_struct *tty);
-	void (*remove)(struct tty_driver *driver, struct tty_struct *tty);
-	int  (*open)(struct tty_struct * tty, struct file * filp);
-	void (*close)(struct tty_struct * tty, struct file * filp);
-	void (*shutdown)(struct tty_struct *tty);
-	void (*cleanup)(struct tty_struct *tty);
-	int  (*write)(struct tty_struct * tty,
-		      const unsigned char *buf, int count);
-	int  (*put_char)(struct tty_struct *tty, unsigned char ch);
-	void (*flush_chars)(struct tty_struct *tty);
-	int  (*write_room)(struct tty_struct *tty);
-	int  (*chars_in_buffer)(struct tty_struct *tty);
-	int  (*ioctl)(struct tty_struct *tty,
-		    unsigned int cmd, unsigned long arg);
-	long (*compat_ioctl)(struct tty_struct *tty,
-			     unsigned int cmd, unsigned long arg);
-	void (*set_termios)(struct tty_struct *tty, struct ktermios * old);
-	void (*throttle)(struct tty_struct * tty);
-	void (*unthrottle)(struct tty_struct * tty);
-	void (*stop)(struct tty_struct *tty);
-	void (*start)(struct tty_struct *tty);
-	void (*hangup)(struct tty_struct *tty);
-	int (*break_ctl)(struct tty_struct *tty, int state);
-	void (*flush_buffer)(struct tty_struct *tty);
-	void (*set_ldisc)(struct tty_struct *tty);
-	void (*wait_until_sent)(struct tty_struct *tty, int timeout);
-	void (*send_xchar)(struct tty_struct *tty, char ch);
-	int (*tiocmget)(struct tty_struct *tty);
-	int (*tiocmset)(struct tty_struct *tty,
-			unsigned int set, unsigned int clear);
-	int (*resize)(struct tty_struct *tty, struct winsize *ws);
-	int (*set_termiox)(struct tty_struct *tty, struct termiox *tnew);
-	int (*get_icount)(struct tty_struct *tty,
-				struct serial_icounter_struct *icount);
-#ifdef CONFIG_CONSOLE_POLL
-	int (*poll_init)(struct tty_driver *driver, int line, char *options);
-	int (*poll_get_char)(struct tty_driver *driver, int line);
-	void (*poll_put_char)(struct tty_driver *driver, int line, char ch);
-#endif
-	const struct file_operations *proc_fops;
-};
-
-struct tty_driver {
-	int	magic;		/* magic number for this structure */
-	struct kref kref;	/* Reference management */
-	struct cdev cdev;
-	struct module	*owner;
-	const char	*driver_name;
-	const char	*name;
-	int	name_base;	/* offset of printed name */
-	int	major;		/* major device number */
-	int	minor_start;	/* start of minor device number */
-	int	num;		/* number of devices allocated */
-	short	type;		/* type of tty driver */
-	short	subtype;	/* subtype of tty driver */
-	struct ktermios init_termios; /* Initial termios */
-	int	flags;		/* tty driver flags */
-	struct proc_dir_entry *proc_entry; /* /proc fs entry */
-	struct tty_driver *other; /* only used for the PTY driver */
-
-	/*
-	 * Pointer to the tty data structures
-	 */
-	struct tty_struct **ttys;
-	struct ktermios **termios;
-	void *driver_state;
-
-	/*
-	 * Driver methods
-	 */
-
-	const struct tty_operations *ops;
-	struct list_head tty_drivers;
-};
-
-extern struct list_head tty_drivers;
-
-extern struct tty_driver *__alloc_tty_driver(int lines, struct module *owner);
-extern void put_tty_driver(struct tty_driver *driver);
-extern void tty_set_operations(struct tty_driver *driver,
-			const struct tty_operations *op);
-extern struct tty_driver *tty_find_polling_driver(char *name, int *line);
-
-extern void tty_driver_kref_put(struct tty_driver *driver);
-
-#define alloc_tty_driver(lines) __alloc_tty_driver(lines, THIS_MODULE)
-
-static inline struct tty_driver *tty_driver_kref_get(struct tty_driver *d)
-{
-	kref_get(&d->kref);
-	return d;
-}
-
-/* tty driver magic number */
-#define TTY_DRIVER_MAGIC		0x5402
-
-/*
- * tty driver flags
- * 
- * TTY_DRIVER_RESET_TERMIOS --- requests the tty layer to reset the
- * 	termios setting when the last process has closed the device.
- * 	Used for PTY's, in particular.
- * 
- * TTY_DRIVER_REAL_RAW --- if set, indicates that the driver will
- * 	guarantee never not to set any special character handling
- * 	flags if ((IGNBRK || (!BRKINT && !PARMRK)) && (IGNPAR ||
- * 	!INPCK)).  That is, if there is no reason for the driver to
- * 	send notifications of parity and break characters up to the
- * 	line driver, it won't do so.  This allows the line driver to
- *	optimize for this case if this flag is set.  (Note that there
- * 	is also a promise, if the above case is true, not to signal
- * 	overruns, either.)
- *
- * TTY_DRIVER_DYNAMIC_DEV --- if set, the individual tty devices need
- *	to be registered with a call to tty_register_device() when the
- *	device is found in the system and unregistered with a call to
- *	tty_unregister_device() so the devices will be show up
- *	properly in sysfs.  If not set, driver->num entries will be
- *	created by the tty core in sysfs when tty_register_driver() is
- *	called.  This is to be used by drivers that have tty devices
- *	that can appear and disappear while the main tty driver is
- *	registered with the tty core.
- *
- * TTY_DRIVER_DEVPTS_MEM -- don't use the standard arrays, instead
- *	use dynamic memory keyed through the devpts filesystem.  This
- *	is only applicable to the pty driver.
- *
- * TTY_DRIVER_HARDWARE_BREAK -- hardware handles break signals. Pass
- *	the requested timeout to the caller instead of using a simple
- *	on/off interface.
- *
- */
-#define TTY_DRIVER_INSTALLED		0x0001
-#define TTY_DRIVER_RESET_TERMIOS	0x0002
-#define TTY_DRIVER_REAL_RAW		0x0004
-#define TTY_DRIVER_DYNAMIC_DEV		0x0008
-#define TTY_DRIVER_DEVPTS_MEM		0x0010
-#define TTY_DRIVER_HARDWARE_BREAK	0x0020
-
-/* tty driver types */
-#define TTY_DRIVER_TYPE_SYSTEM		0x0001
-#define TTY_DRIVER_TYPE_CONSOLE		0x0002
-#define TTY_DRIVER_TYPE_SERIAL		0x0003
-#define TTY_DRIVER_TYPE_PTY		0x0004
-#define TTY_DRIVER_TYPE_SCC		0x0005	/* scc driver */
-#define TTY_DRIVER_TYPE_SYSCONS		0x0006
-
-/* system subtypes (magic, used by tty_io.c) */
-#define SYSTEM_TYPE_TTY			0x0001
-#define SYSTEM_TYPE_CONSOLE		0x0002
-#define SYSTEM_TYPE_SYSCONS		0x0003
-#define SYSTEM_TYPE_SYSPTMX		0x0004
-
-/* pty subtypes (magic, used by tty_io.c) */
-#define PTY_TYPE_MASTER			0x0001
-#define PTY_TYPE_SLAVE			0x0002
-
-/* serial subtype definitions */
-#define SERIAL_TYPE_NORMAL	1
-
-#endif /* #ifdef _LINUX_TTY_DRIVER_H */
diff --git a/ANDROID_3.4.5/include/linux/tty_flip.h b/ANDROID_3.4.5/include/linux/tty_flip.h
deleted file mode 100644
index 9239d033..00000000
--- a/ANDROID_3.4.5/include/linux/tty_flip.h
+++ /dev/null
@@ -1,28 +0,0 @@
-#ifndef _LINUX_TTY_FLIP_H
-#define _LINUX_TTY_FLIP_H
-
-extern int tty_buffer_request_room(struct tty_struct *tty, size_t size);
-extern int tty_insert_flip_string_flags(struct tty_struct *tty, const unsigned char *chars, const char *flags, size_t size);
-extern int tty_insert_flip_string_fixed_flag(struct tty_struct *tty, const unsigned char *chars, char flag, size_t size);
-extern int tty_prepare_flip_string(struct tty_struct *tty, unsigned char **chars, size_t size);
-extern int tty_prepare_flip_string_flags(struct tty_struct *tty, unsigned char **chars, char **flags, size_t size);
-void tty_schedule_flip(struct tty_struct *tty);
-
-static inline int tty_insert_flip_char(struct tty_struct *tty,
-					unsigned char ch, char flag)
-{
-	struct tty_buffer *tb = tty->buf.tail;
-	if (tb && tb->used < tb->size) {
-		tb->flag_buf_ptr[tb->used] = flag;
-		tb->char_buf_ptr[tb->used++] = ch;
-		return 1;
-	}
-	return tty_insert_flip_string_flags(tty, &ch, &flag, 1);
-}
-
-static inline int tty_insert_flip_string(struct tty_struct *tty, const unsigned char *chars, size_t size)
-{
-	return tty_insert_flip_string_fixed_flag(tty, chars, TTY_NORMAL, size);
-}
-
-#endif /* _LINUX_TTY_FLIP_H */
diff --git a/ANDROID_3.4.5/include/linux/tty_ldisc.h b/ANDROID_3.4.5/include/linux/tty_ldisc.h
deleted file mode 100644
index ff7dc086..00000000
--- a/ANDROID_3.4.5/include/linux/tty_ldisc.h
+++ /dev/null
@@ -1,166 +0,0 @@
-#ifndef _LINUX_TTY_LDISC_H
-#define _LINUX_TTY_LDISC_H
-
-/*
- * This structure defines the interface between the tty line discipline
- * implementation and the tty routines.  The following routines can be
- * defined; unless noted otherwise, they are optional, and can be
- * filled in with a null pointer.
- *
- * int	(*open)(struct tty_struct *);
- *
- * 	This function is called when the line discipline is associated
- * 	with the tty.  The line discipline can use this as an
- * 	opportunity to initialize any state needed by the ldisc routines.
- * 
- * void	(*close)(struct tty_struct *);
- *
- *	This function is called when the line discipline is being
- * 	shutdown, either because the tty is being closed or because
- * 	the tty is being changed to use a new line discipline
- * 
- * void	(*flush_buffer)(struct tty_struct *tty);
- *
- * 	This function instructs the line discipline to clear its
- * 	buffers of any input characters it may have queued to be
- * 	delivered to the user mode process.
- * 
- * ssize_t (*chars_in_buffer)(struct tty_struct *tty);
- *
- * 	This function returns the number of input characters the line
- *	discipline may have queued up to be delivered to the user mode
- *	process.
- * 
- * ssize_t (*read)(struct tty_struct * tty, struct file * file,
- *		   unsigned char * buf, size_t nr);
- *
- * 	This function is called when the user requests to read from
- * 	the tty.  The line discipline will return whatever characters
- * 	it has buffered up for the user.  If this function is not
- * 	defined, the user will receive an EIO error.
- * 
- * ssize_t (*write)(struct tty_struct * tty, struct file * file,
- * 		    const unsigned char * buf, size_t nr);
- *
- * 	This function is called when the user requests to write to the
- * 	tty.  The line discipline will deliver the characters to the
- * 	low-level tty device for transmission, optionally performing
- * 	some processing on the characters first.  If this function is
- * 	not defined, the user will receive an EIO error.
- * 
- * int	(*ioctl)(struct tty_struct * tty, struct file * file,
- * 		 unsigned int cmd, unsigned long arg);
- *
- *	This function is called when the user requests an ioctl which
- * 	is not handled by the tty layer or the low-level tty driver.
- * 	It is intended for ioctls which affect line discpline
- * 	operation.  Note that the search order for ioctls is (1) tty
- * 	layer, (2) tty low-level driver, (3) line discpline.  So a
- * 	low-level driver can "grab" an ioctl request before the line
- * 	discpline has a chance to see it.
- * 
- * long	(*compat_ioctl)(struct tty_struct * tty, struct file * file,
- * 		        unsigned int cmd, unsigned long arg);
- *
- *      Process ioctl calls from 32-bit process on 64-bit system
- *
- * void	(*set_termios)(struct tty_struct *tty, struct ktermios * old);
- *
- * 	This function notifies the line discpline that a change has
- * 	been made to the termios structure.
- * 
- * int	(*poll)(struct tty_struct * tty, struct file * file,
- * 		  poll_table *wait);
- *
- * 	This function is called when a user attempts to select/poll on a
- * 	tty device.  It is solely the responsibility of the line
- * 	discipline to handle poll requests.
- *
- * void	(*receive_buf)(struct tty_struct *, const unsigned char *cp,
- * 		       char *fp, int count);
- *
- * 	This function is called by the low-level tty driver to send
- * 	characters received by the hardware to the line discpline for
- * 	processing.  <cp> is a pointer to the buffer of input
- * 	character received by the device.  <fp> is a pointer to a
- * 	pointer of flag bytes which indicate whether a character was
- * 	received with a parity error, etc.
- * 
- * void	(*write_wakeup)(struct tty_struct *);
- *
- * 	This function is called by the low-level tty driver to signal
- * 	that line discpline should try to send more characters to the
- * 	low-level driver for transmission.  If the line discpline does
- * 	not have any more data to send, it can just return.
- *
- * int (*hangup)(struct tty_struct *)
- *
- *	Called on a hangup. Tells the discipline that it should
- *	cease I/O to the tty driver. Can sleep. The driver should
- *	seek to perform this action quickly but should wait until
- *	any pending driver I/O is completed.
- *
- * void (*dcd_change)(struct tty_struct *tty, unsigned int status,
- *			struct pps_event_time *ts)
- *
- *	Tells the discipline that the DCD pin has changed its status and
- *	the relative timestamp. Pointer ts cannot be NULL.
- */
-
-#include <linux/fs.h>
-#include <linux/wait.h>
-#include <linux/pps_kernel.h>
-
-struct tty_ldisc_ops {
-	int	magic;
-	char	*name;
-	int	num;
-	int	flags;
-	
-	/*
-	 * The following routines are called from above.
-	 */
-	int	(*open)(struct tty_struct *);
-	void	(*close)(struct tty_struct *);
-	void	(*flush_buffer)(struct tty_struct *tty);
-	ssize_t	(*chars_in_buffer)(struct tty_struct *tty);
-	ssize_t	(*read)(struct tty_struct * tty, struct file * file,
-			unsigned char __user * buf, size_t nr);
-	ssize_t	(*write)(struct tty_struct * tty, struct file * file,
-			 const unsigned char * buf, size_t nr);	
-	int	(*ioctl)(struct tty_struct * tty, struct file * file,
-			 unsigned int cmd, unsigned long arg);
-	long	(*compat_ioctl)(struct tty_struct * tty, struct file * file,
-				unsigned int cmd, unsigned long arg);
-	void	(*set_termios)(struct tty_struct *tty, struct ktermios * old);
-	unsigned int (*poll)(struct tty_struct *, struct file *,
-			     struct poll_table_struct *);
-	int	(*hangup)(struct tty_struct *tty);
-	
-	/*
-	 * The following routines are called from below.
-	 */
-	void	(*receive_buf)(struct tty_struct *, const unsigned char *cp,
-			       char *fp, int count);
-	void	(*write_wakeup)(struct tty_struct *);
-	void	(*dcd_change)(struct tty_struct *, unsigned int,
-				struct pps_event_time *);
-
-	struct  module *owner;
-	
-	int refcount;
-};
-
-struct tty_ldisc {
-	struct tty_ldisc_ops *ops;
-	atomic_t users;
-};
-
-#define TTY_LDISC_MAGIC	0x5403
-
-#define LDISC_FLAG_DEFINED	0x00000001
-
-#define MODULE_ALIAS_LDISC(ldisc) \
-	MODULE_ALIAS("tty-ldisc-" __stringify(ldisc))
-
-#endif /* _LINUX_TTY_LDISC_H */
diff --git a/ANDROID_3.4.5/include/linux/typecheck.h b/ANDROID_3.4.5/include/linux/typecheck.h
deleted file mode 100644
index eb5b74a5..00000000
--- a/ANDROID_3.4.5/include/linux/typecheck.h
+++ /dev/null
@@ -1,24 +0,0 @@
-#ifndef TYPECHECK_H_INCLUDED
-#define TYPECHECK_H_INCLUDED
-
-/*
- * Check at compile time that something is of a particular type.
- * Always evaluates to 1 so you may use it easily in comparisons.
- */
-#define typecheck(type,x) \
-({	type __dummy; \
-	typeof(x) __dummy2; \
-	(void)(&__dummy == &__dummy2); \
-	1; \
-})
-
-/*
- * Check at compile time that 'function' is a certain type, or is a pointer
- * to that type (needs to use typedef for the function type.)
- */
-#define typecheck_fn(type,function) \
-({	typeof(type) __tmp = function; \
-	(void)__tmp; \
-})
-
-#endif		/* TYPECHECK_H_INCLUDED */
diff --git a/ANDROID_3.4.5/include/linux/types.h b/ANDROID_3.4.5/include/linux/types.h
deleted file mode 100644
index 7f480db6..00000000
--- a/ANDROID_3.4.5/include/linux/types.h
+++ /dev/null
@@ -1,260 +0,0 @@
-#ifndef _LINUX_TYPES_H
-#define _LINUX_TYPES_H
-
-#include <asm/types.h>
-
-#ifndef __ASSEMBLY__
-#ifdef	__KERNEL__
-
-#define DECLARE_BITMAP(name,bits) \
-	unsigned long name[BITS_TO_LONGS(bits)]
-#else
-#ifndef __EXPORTED_HEADERS__
-#warning "Attempt to use kernel headers from user space, see http://kernelnewbies.org/KernelHeaders"
-#endif /* __EXPORTED_HEADERS__ */
-#endif
-
-#include <linux/posix_types.h>
-
-#ifdef __KERNEL__
-
-typedef __u32 __kernel_dev_t;
-
-typedef __kernel_fd_set		fd_set;
-typedef __kernel_dev_t		dev_t;
-typedef __kernel_ino_t		ino_t;
-typedef __kernel_mode_t		mode_t;
-typedef unsigned short		umode_t;
-typedef __kernel_nlink_t	nlink_t;
-typedef __kernel_off_t		off_t;
-typedef __kernel_pid_t		pid_t;
-typedef __kernel_daddr_t	daddr_t;
-typedef __kernel_key_t		key_t;
-typedef __kernel_suseconds_t	suseconds_t;
-typedef __kernel_timer_t	timer_t;
-typedef __kernel_clockid_t	clockid_t;
-typedef __kernel_mqd_t		mqd_t;
-
-typedef _Bool			bool;
-
-typedef __kernel_uid32_t	uid_t;
-typedef __kernel_gid32_t	gid_t;
-typedef __kernel_uid16_t        uid16_t;
-typedef __kernel_gid16_t        gid16_t;
-
-typedef unsigned long		uintptr_t;
-
-#ifdef CONFIG_UID16
-/* This is defined by include/asm-{arch}/posix_types.h */
-typedef __kernel_old_uid_t	old_uid_t;
-typedef __kernel_old_gid_t	old_gid_t;
-#endif /* CONFIG_UID16 */
-
-#if defined(__GNUC__)
-typedef __kernel_loff_t		loff_t;
-#endif
-
-/*
- * The following typedefs are also protected by individual ifdefs for
- * historical reasons:
- */
-#ifndef _SIZE_T
-#define _SIZE_T
-typedef __kernel_size_t		size_t;
-#endif
-
-#ifndef _SSIZE_T
-#define _SSIZE_T
-typedef __kernel_ssize_t	ssize_t;
-#endif
-
-#ifndef _PTRDIFF_T
-#define _PTRDIFF_T
-typedef __kernel_ptrdiff_t	ptrdiff_t;
-#endif
-
-#ifndef _TIME_T
-#define _TIME_T
-typedef __kernel_time_t		time_t;
-#endif
-
-#ifndef _CLOCK_T
-#define _CLOCK_T
-typedef __kernel_clock_t	clock_t;
-#endif
-
-#ifndef _CADDR_T
-#define _CADDR_T
-typedef __kernel_caddr_t	caddr_t;
-#endif
-
-/* bsd */
-typedef unsigned char		u_char;
-typedef unsigned short		u_short;
-typedef unsigned int		u_int;
-typedef unsigned long		u_long;
-
-/* sysv */
-typedef unsigned char		unchar;
-typedef unsigned short		ushort;
-typedef unsigned int		uint;
-typedef unsigned long		ulong;
-
-#ifndef __BIT_TYPES_DEFINED__
-#define __BIT_TYPES_DEFINED__
-
-typedef		__u8		u_int8_t;
-typedef		__s8		int8_t;
-typedef		__u16		u_int16_t;
-typedef		__s16		int16_t;
-typedef		__u32		u_int32_t;
-typedef		__s32		int32_t;
-
-#endif /* !(__BIT_TYPES_DEFINED__) */
-
-typedef		__u8		uint8_t;
-typedef		__u16		uint16_t;
-typedef		__u32		uint32_t;
-
-#if defined(__GNUC__)
-typedef		__u64		uint64_t;
-typedef		__u64		u_int64_t;
-typedef		__s64		int64_t;
-#endif
-
-/* this is a special 64bit data type that is 8-byte aligned */
-#define aligned_u64 __u64 __attribute__((aligned(8)))
-#define aligned_be64 __be64 __attribute__((aligned(8)))
-#define aligned_le64 __le64 __attribute__((aligned(8)))
-
-/**
- * The type used for indexing onto a disc or disc partition.
- *
- * Linux always considers sectors to be 512 bytes long independently
- * of the devices real block size.
- *
- * blkcnt_t is the type of the inode's block count.
- */
-#ifdef CONFIG_LBDAF
-typedef u64 sector_t;
-typedef u64 blkcnt_t;
-#else
-typedef unsigned long sector_t;
-typedef unsigned long blkcnt_t;
-#endif
-
-/*
- * The type of an index into the pagecache.  Use a #define so asm/types.h
- * can override it.
- */
-#ifndef pgoff_t
-#define pgoff_t unsigned long
-#endif
-
-#ifdef CONFIG_ARCH_DMA_ADDR_T_64BIT
-typedef u64 dma_addr_t;
-#else
-typedef u32 dma_addr_t;
-#endif /* dma_addr_t */
-
-#endif /* __KERNEL__ */
-
-/*
- * Below are truly Linux-specific types that should never collide with
- * any application/library that wants linux/types.h.
- */
-
-#ifdef __CHECKER__
-#define __bitwise__ __attribute__((bitwise))
-#else
-#define __bitwise__
-#endif
-#ifdef __CHECK_ENDIAN__
-#define __bitwise __bitwise__
-#else
-#define __bitwise
-#endif
-
-typedef __u16 __bitwise __le16;
-typedef __u16 __bitwise __be16;
-typedef __u32 __bitwise __le32;
-typedef __u32 __bitwise __be32;
-typedef __u64 __bitwise __le64;
-typedef __u64 __bitwise __be64;
-
-typedef __u16 __bitwise __sum16;
-typedef __u32 __bitwise __wsum;
-
-/*
- * aligned_u64 should be used in defining kernel<->userspace ABIs to avoid
- * common 32/64-bit compat problems.
- * 64-bit values align to 4-byte boundaries on x86_32 (and possibly other
- * architectures) and to 8-byte boundaries on 64-bit architectures.  The new
- * aligned_64 type enforces 8-byte alignment so that structs containing
- * aligned_64 values have the same alignment on 32-bit and 64-bit architectures.
- * No conversions are necessary between 32-bit user-space and a 64-bit kernel.
- */
-#define __aligned_u64 __u64 __attribute__((aligned(8)))
-#define __aligned_be64 __be64 __attribute__((aligned(8)))
-#define __aligned_le64 __le64 __attribute__((aligned(8)))
-
-#ifdef __KERNEL__
-typedef unsigned __bitwise__ gfp_t;
-typedef unsigned __bitwise__ fmode_t;
-
-#ifdef CONFIG_PHYS_ADDR_T_64BIT
-typedef u64 phys_addr_t;
-#else
-typedef u32 phys_addr_t;
-#endif
-
-typedef phys_addr_t resource_size_t;
-
-/*
- * This type is the placeholder for a hardware interrupt number. It has to be
- * big enough to enclose whatever representation is used by a given platform.
- */
-typedef unsigned long irq_hw_number_t;
-
-typedef struct {
-	int counter;
-} atomic_t;
-
-#ifdef CONFIG_64BIT
-typedef struct {
-	long counter;
-} atomic64_t;
-#endif
-
-struct list_head {
-	struct list_head *next, *prev;
-};
-
-struct hlist_head {
-	struct hlist_node *first;
-};
-
-struct hlist_node {
-	struct hlist_node *next, **pprev;
-};
-
-struct ustat {
-	__kernel_daddr_t	f_tfree;
-	__kernel_ino_t		f_tinode;
-	char			f_fname[6];
-	char			f_fpack[6];
-};
-
-/**
- * struct rcu_head - callback structure for use with RCU
- * @next: next update requests in a list
- * @func: actual update function to call after the grace period.
- */
-struct rcu_head {
-	struct rcu_head *next;
-	void (*func)(struct rcu_head *head);
-};
-
-#endif	/* __KERNEL__ */
-#endif /*  __ASSEMBLY__ */
-#endif /* _LINUX_TYPES_H */
diff --git a/ANDROID_3.4.5/include/linux/u64_stats_sync.h b/ANDROID_3.4.5/include/linux/u64_stats_sync.h
deleted file mode 100644
index 8da8c4e8..00000000
--- a/ANDROID_3.4.5/include/linux/u64_stats_sync.h
+++ /dev/null
@@ -1,140 +0,0 @@
-#ifndef _LINUX_U64_STATS_SYNC_H
-#define _LINUX_U64_STATS_SYNC_H
-
-/*
- * To properly implement 64bits network statistics on 32bit and 64bit hosts,
- * we provide a synchronization point, that is a noop on 64bit or UP kernels.
- *
- * Key points :
- * 1) Use a seqcount on SMP 32bits, with low overhead.
- * 2) Whole thing is a noop on 64bit arches or UP kernels.
- * 3) Write side must ensure mutual exclusion or one seqcount update could
- *    be lost, thus blocking readers forever.
- *    If this synchronization point is not a mutex, but a spinlock or
- *    spinlock_bh() or disable_bh() :
- * 3.1) Write side should not sleep.
- * 3.2) Write side should not allow preemption.
- * 3.3) If applicable, interrupts should be disabled.
- *
- * 4) If reader fetches several counters, there is no guarantee the whole values
- *    are consistent (remember point 1) : this is a noop on 64bit arches anyway)
- *
- * 5) readers are allowed to sleep or be preempted/interrupted : They perform
- *    pure reads. But if they have to fetch many values, it's better to not allow
- *    preemptions/interruptions to avoid many retries.
- *
- * 6) If counter might be written by an interrupt, readers should block interrupts.
- *    (On UP, there is no seqcount_t protection, a reader allowing interrupts could
- *     read partial values)
- *
- * 7) For softirq uses, readers can use u64_stats_fetch_begin_bh() and
- *    u64_stats_fetch_retry_bh() helpers
- *
- * Usage :
- *
- * Stats producer (writer) should use following template granted it already got
- * an exclusive access to counters (a lock is already taken, or per cpu
- * data is used [in a non preemptable context])
- *
- *   spin_lock_bh(...) or other synchronization to get exclusive access
- *   ...
- *   u64_stats_update_begin(&stats->syncp);
- *   stats->bytes64 += len; // non atomic operation
- *   stats->packets64++;    // non atomic operation
- *   u64_stats_update_end(&stats->syncp);
- *
- * While a consumer (reader) should use following template to get consistent
- * snapshot for each variable (but no guarantee on several ones)
- *
- * u64 tbytes, tpackets;
- * unsigned int start;
- *
- * do {
- *         start = u64_stats_fetch_begin(&stats->syncp);
- *         tbytes = stats->bytes64; // non atomic operation
- *         tpackets = stats->packets64; // non atomic operation
- * } while (u64_stats_fetch_retry(&stats->syncp, start));
- *
- *
- * Example of use in drivers/net/loopback.c, using per_cpu containers,
- * in BH disabled context.
- */
-#include <linux/seqlock.h>
-
-struct u64_stats_sync {
-#if BITS_PER_LONG==32 && defined(CONFIG_SMP)
-	seqcount_t	seq;
-#endif
-};
-
-static inline void u64_stats_update_begin(struct u64_stats_sync *syncp)
-{
-#if BITS_PER_LONG==32 && defined(CONFIG_SMP)
-	write_seqcount_begin(&syncp->seq);
-#endif
-}
-
-static inline void u64_stats_update_end(struct u64_stats_sync *syncp)
-{
-#if BITS_PER_LONG==32 && defined(CONFIG_SMP)
-	write_seqcount_end(&syncp->seq);
-#endif
-}
-
-static inline unsigned int u64_stats_fetch_begin(const struct u64_stats_sync *syncp)
-{
-#if BITS_PER_LONG==32 && defined(CONFIG_SMP)
-	return read_seqcount_begin(&syncp->seq);
-#else
-#if BITS_PER_LONG==32
-	preempt_disable();
-#endif
-	return 0;
-#endif
-}
-
-static inline bool u64_stats_fetch_retry(const struct u64_stats_sync *syncp,
-					 unsigned int start)
-{
-#if BITS_PER_LONG==32 && defined(CONFIG_SMP)
-	return read_seqcount_retry(&syncp->seq, start);
-#else
-#if BITS_PER_LONG==32
-	preempt_enable();
-#endif
-	return false;
-#endif
-}
-
-/*
- * In case softirq handlers can update u64 counters, readers can use following helpers
- * - SMP 32bit arches use seqcount protection, irq safe.
- * - UP 32bit must disable BH.
- * - 64bit have no problem atomically reading u64 values, irq safe.
- */
-static inline unsigned int u64_stats_fetch_begin_bh(const struct u64_stats_sync *syncp)
-{
-#if BITS_PER_LONG==32 && defined(CONFIG_SMP)
-	return read_seqcount_begin(&syncp->seq);
-#else
-#if BITS_PER_LONG==32
-	local_bh_disable();
-#endif
-	return 0;
-#endif
-}
-
-static inline bool u64_stats_fetch_retry_bh(const struct u64_stats_sync *syncp,
-					 unsigned int start)
-{
-#if BITS_PER_LONG==32 && defined(CONFIG_SMP)
-	return read_seqcount_retry(&syncp->seq, start);
-#else
-#if BITS_PER_LONG==32
-	local_bh_enable();
-#endif
-	return false;
-#endif
-}
-
-#endif /* _LINUX_U64_STATS_SYNC_H */
diff --git a/ANDROID_3.4.5/include/linux/uaccess.h b/ANDROID_3.4.5/include/linux/uaccess.h
deleted file mode 100644
index 5ca0951e..00000000
--- a/ANDROID_3.4.5/include/linux/uaccess.h
+++ /dev/null
@@ -1,111 +0,0 @@
-#ifndef __LINUX_UACCESS_H__
-#define __LINUX_UACCESS_H__
-
-#include <linux/preempt.h>
-#include <asm/uaccess.h>
-
-/*
- * These routines enable/disable the pagefault handler in that
- * it will not take any locks and go straight to the fixup table.
- *
- * They have great resemblance to the preempt_disable/enable calls
- * and in fact they are identical; this is because currently there is
- * no other way to make the pagefault handlers do this. So we do
- * disable preemption but we don't necessarily care about that.
- */
-static inline void pagefault_disable(void)
-{
-	inc_preempt_count();
-	/*
-	 * make sure to have issued the store before a pagefault
-	 * can hit.
-	 */
-	barrier();
-}
-
-static inline void pagefault_enable(void)
-{
-	/*
-	 * make sure to issue those last loads/stores before enabling
-	 * the pagefault handler again.
-	 */
-	barrier();
-	dec_preempt_count();
-	/*
-	 * make sure we do..
-	 */
-	barrier();
-	preempt_check_resched();
-}
-
-#ifndef ARCH_HAS_NOCACHE_UACCESS
-
-static inline unsigned long __copy_from_user_inatomic_nocache(void *to,
-				const void __user *from, unsigned long n)
-{
-	return __copy_from_user_inatomic(to, from, n);
-}
-
-static inline unsigned long __copy_from_user_nocache(void *to,
-				const void __user *from, unsigned long n)
-{
-	return __copy_from_user(to, from, n);
-}
-
-#endif		/* ARCH_HAS_NOCACHE_UACCESS */
-
-/**
- * probe_kernel_address(): safely attempt to read from a location
- * @addr: address to read from - its type is type typeof(retval)*
- * @retval: read into this variable
- *
- * Safely read from address @addr into variable @revtal.  If a kernel fault
- * happens, handle that and return -EFAULT.
- * We ensure that the __get_user() is executed in atomic context so that
- * do_page_fault() doesn't attempt to take mmap_sem.  This makes
- * probe_kernel_address() suitable for use within regions where the caller
- * already holds mmap_sem, or other locks which nest inside mmap_sem.
- * This must be a macro because __get_user() needs to know the types of the
- * args.
- *
- * We don't include enough header files to be able to do the set_fs().  We
- * require that the probe_kernel_address() caller will do that.
- */
-#define probe_kernel_address(addr, retval)		\
-	({						\
-		long ret;				\
-		mm_segment_t old_fs = get_fs();		\
-							\
-		set_fs(KERNEL_DS);			\
-		pagefault_disable();			\
-		ret = __copy_from_user_inatomic(&(retval), (__force typeof(retval) __user *)(addr), sizeof(retval));		\
-		pagefault_enable();			\
-		set_fs(old_fs);				\
-		ret;					\
-	})
-
-/*
- * probe_kernel_read(): safely attempt to read from a location
- * @dst: pointer to the buffer that shall take the data
- * @src: address to read from
- * @size: size of the data chunk
- *
- * Safely read from address @src to the buffer at @dst.  If a kernel fault
- * happens, handle that and return -EFAULT.
- */
-extern long probe_kernel_read(void *dst, const void *src, size_t size);
-extern long __probe_kernel_read(void *dst, const void *src, size_t size);
-
-/*
- * probe_kernel_write(): safely attempt to write to a location
- * @dst: address to write to
- * @src: pointer to the data that shall be written
- * @size: size of the data chunk
- *
- * Safely write to address @dst from the buffer at @src.  If a kernel fault
- * happens, handle that and return -EFAULT.
- */
-extern long notrace probe_kernel_write(void *dst, const void *src, size_t size);
-extern long notrace __probe_kernel_write(void *dst, const void *src, size_t size);
-
-#endif		/* __LINUX_UACCESS_H__ */
diff --git a/ANDROID_3.4.5/include/linux/ucb1400.h b/ANDROID_3.4.5/include/linux/ucb1400.h
deleted file mode 100644
index d21b33c4..00000000
--- a/ANDROID_3.4.5/include/linux/ucb1400.h
+++ /dev/null
@@ -1,171 +0,0 @@
-/*
- * Register definitions and functions for:
- *  Philips UCB1400 driver
- *
- * Based on ucb1400_ts:
- *  Author:	Nicolas Pitre
- *  Created:	September 25, 2006
- *  Copyright:	MontaVista Software, Inc.
- *
- * Spliting done by: Marek Vasut <marek.vasut@gmail.com>
- * If something doesn't work and it worked before spliting, e-mail me,
- * dont bother Nicolas please ;-)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This code is heavily based on ucb1x00-*.c copyrighted by Russell King
- * covering the UCB1100, UCB1200 and UCB1300..  Support for the UCB1400 has
- * been made separate from ucb1x00-core/ucb1x00-ts on Russell's request.
- */
-
-#ifndef _LINUX__UCB1400_H
-#define _LINUX__UCB1400_H
-
-#include <sound/ac97_codec.h>
-#include <linux/mutex.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-
-/*
- * UCB1400 AC-link registers
- */
-
-#define UCB_IO_DATA		0x5a
-#define UCB_IO_DIR		0x5c
-#define UCB_IE_RIS		0x5e
-#define UCB_IE_FAL		0x60
-#define UCB_IE_STATUS		0x62
-#define UCB_IE_CLEAR		0x62
-#define UCB_IE_ADC		(1 << 11)
-#define UCB_IE_TSPX		(1 << 12)
-
-#define UCB_TS_CR		0x64
-#define UCB_TS_CR_TSMX_POW	(1 << 0)
-#define UCB_TS_CR_TSPX_POW	(1 << 1)
-#define UCB_TS_CR_TSMY_POW	(1 << 2)
-#define UCB_TS_CR_TSPY_POW	(1 << 3)
-#define UCB_TS_CR_TSMX_GND	(1 << 4)
-#define UCB_TS_CR_TSPX_GND	(1 << 5)
-#define UCB_TS_CR_TSMY_GND	(1 << 6)
-#define UCB_TS_CR_TSPY_GND	(1 << 7)
-#define UCB_TS_CR_MODE_INT	(0 << 8)
-#define UCB_TS_CR_MODE_PRES	(1 << 8)
-#define UCB_TS_CR_MODE_POS	(2 << 8)
-#define UCB_TS_CR_BIAS_ENA	(1 << 11)
-#define UCB_TS_CR_TSPX_LOW	(1 << 12)
-#define UCB_TS_CR_TSMX_LOW	(1 << 13)
-
-#define UCB_ADC_CR		0x66
-#define UCB_ADC_SYNC_ENA	(1 << 0)
-#define UCB_ADC_VREFBYP_CON	(1 << 1)
-#define UCB_ADC_INP_TSPX	(0 << 2)
-#define UCB_ADC_INP_TSMX	(1 << 2)
-#define UCB_ADC_INP_TSPY	(2 << 2)
-#define UCB_ADC_INP_TSMY	(3 << 2)
-#define UCB_ADC_INP_AD0		(4 << 2)
-#define UCB_ADC_INP_AD1		(5 << 2)
-#define UCB_ADC_INP_AD2		(6 << 2)
-#define UCB_ADC_INP_AD3		(7 << 2)
-#define UCB_ADC_EXT_REF		(1 << 5)
-#define UCB_ADC_START		(1 << 7)
-#define UCB_ADC_ENA		(1 << 15)
-
-#define UCB_ADC_DATA		0x68
-#define UCB_ADC_DAT_VALID	(1 << 15)
-
-#define UCB_FCSR		0x6c
-#define UCB_FCSR_AVE		(1 << 12)
-
-#define UCB_ADC_DAT_MASK	0x3ff
-
-#define UCB_ID			0x7e
-#define UCB_ID_1400             0x4304
-
-struct ucb1400_gpio_data {
-	int gpio_offset;
-	int (*gpio_setup)(struct device *dev, int ngpio);
-	int (*gpio_teardown)(struct device *dev, int ngpio);
-};
-
-struct ucb1400_gpio {
-	struct gpio_chip	gc;
-	struct snd_ac97		*ac97;
-};
-
-struct ucb1400_ts {
-	struct input_dev	*ts_idev;
-	int			id;
-	int			irq;
-	struct snd_ac97		*ac97;
-	wait_queue_head_t	ts_wait;
-	bool			stopped;
-};
-
-struct ucb1400 {
-	struct platform_device	*ucb1400_ts;
-	struct platform_device	*ucb1400_gpio;
-};
-
-struct ucb1400_pdata {
-	int	irq;
-};
-
-static inline u16 ucb1400_reg_read(struct snd_ac97 *ac97, u16 reg)
-{
-	return ac97->bus->ops->read(ac97, reg);
-}
-
-static inline void ucb1400_reg_write(struct snd_ac97 *ac97, u16 reg, u16 val)
-{
-	ac97->bus->ops->write(ac97, reg, val);
-}
-
-static inline u16 ucb1400_gpio_get_value(struct snd_ac97 *ac97, u16 gpio)
-{
-	return ucb1400_reg_read(ac97, UCB_IO_DATA) & (1 << gpio);
-}
-
-static inline void ucb1400_gpio_set_value(struct snd_ac97 *ac97, u16 gpio,
-						u16 val)
-{
-	ucb1400_reg_write(ac97, UCB_IO_DATA, val ?
-			ucb1400_reg_read(ac97, UCB_IO_DATA) | (1 << gpio) :
-			ucb1400_reg_read(ac97, UCB_IO_DATA) & ~(1 << gpio));
-}
-
-static inline u16 ucb1400_gpio_get_direction(struct snd_ac97 *ac97, u16 gpio)
-{
-	return ucb1400_reg_read(ac97, UCB_IO_DIR) & (1 << gpio);
-}
-
-static inline void ucb1400_gpio_set_direction(struct snd_ac97 *ac97, u16 gpio,
-						u16 dir)
-{
-	ucb1400_reg_write(ac97, UCB_IO_DIR, dir ?
-			ucb1400_reg_read(ac97, UCB_IO_DIR) | (1 << gpio) :
-			ucb1400_reg_read(ac97, UCB_IO_DIR) & ~(1 << gpio));
-}
-
-static inline void ucb1400_adc_enable(struct snd_ac97 *ac97)
-{
-	ucb1400_reg_write(ac97, UCB_ADC_CR, UCB_ADC_ENA);
-}
-
-static inline void ucb1400_adc_disable(struct snd_ac97 *ac97)
-{
-	ucb1400_reg_write(ac97, UCB_ADC_CR, 0);
-}
-
-
-unsigned int ucb1400_adc_read(struct snd_ac97 *ac97, u16 adc_channel,
-			      int adcsync);
-
-#ifdef CONFIG_GPIO_UCB1400
-void __init ucb1400_gpio_set_data(struct ucb1400_gpio_data *data);
-#else
-static inline void ucb1400_gpio_set_data(struct ucb1400_gpio_data *data) {}
-#endif
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/udf_fs_i.h b/ANDROID_3.4.5/include/linux/udf_fs_i.h
deleted file mode 100644
index 35369659..00000000
--- a/ANDROID_3.4.5/include/linux/udf_fs_i.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * udf_fs_i.h
- *
- * This file is intended for the Linux kernel/module. 
- *
- * COPYRIGHT
- *	This file is distributed under the terms of the GNU General Public
- *	License (GPL). Copies of the GPL can be obtained from:
- *		ftp://prep.ai.mit.edu/pub/gnu/GPL
- *	Each contributing author retains all rights to their own work.
- */
-#ifndef _UDF_FS_I_H
-#define _UDF_FS_I_H 1
-
-/* exported IOCTLs, we have 'l', 0x40-0x7f */
-#define UDF_GETEASIZE   _IOR('l', 0x40, int)
-#define UDF_GETEABLOCK  _IOR('l', 0x41, void *)
-#define UDF_GETVOLIDENT _IOR('l', 0x42, void *)
-#define UDF_RELOCATE_BLOCKS _IOWR('l', 0x43, long)
-
-#endif /* _UDF_FS_I_H */
diff --git a/ANDROID_3.4.5/include/linux/udp.h b/ANDROID_3.4.5/include/linux/udp.h
deleted file mode 100644
index 03f72a2b..00000000
--- a/ANDROID_3.4.5/include/linux/udp.h
+++ /dev/null
@@ -1,101 +0,0 @@
-/*
- * INET		An implementation of the TCP/IP protocol suite for the LINUX
- *		operating system.  INET is implemented using the  BSD Socket
- *		interface as the means of communication with the user level.
- *
- *		Definitions for the UDP protocol.
- *
- * Version:	@(#)udp.h	1.0.2	04/28/93
- *
- * Author:	Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
- *
- *		This program is free software; you can redistribute it and/or
- *		modify it under the terms of the GNU General Public License
- *		as published by the Free Software Foundation; either version
- *		2 of the License, or (at your option) any later version.
- */
-#ifndef _LINUX_UDP_H
-#define _LINUX_UDP_H
-
-#include <linux/types.h>
-
-struct udphdr {
-	__be16	source;
-	__be16	dest;
-	__be16	len;
-	__sum16	check;
-};
-
-/* UDP socket options */
-#define UDP_CORK	1	/* Never send partially complete segments */
-#define UDP_ENCAP	100	/* Set the socket to accept encapsulated packets */
-
-/* UDP encapsulation types */
-#define UDP_ENCAP_ESPINUDP_NON_IKE	1 /* draft-ietf-ipsec-nat-t-ike-00/01 */
-#define UDP_ENCAP_ESPINUDP	2 /* draft-ietf-ipsec-udp-encaps-06 */
-#define UDP_ENCAP_L2TPINUDP	3 /* rfc2661 */
-
-#ifdef __KERNEL__
-#include <net/inet_sock.h>
-#include <linux/skbuff.h>
-#include <net/netns/hash.h>
-
-static inline struct udphdr *udp_hdr(const struct sk_buff *skb)
-{
-	return (struct udphdr *)skb_transport_header(skb);
-}
-
-#define UDP_HTABLE_SIZE_MIN		(CONFIG_BASE_SMALL ? 128 : 256)
-
-static inline int udp_hashfn(struct net *net, unsigned num, unsigned mask)
-{
-	return (num + net_hash_mix(net)) & mask;
-}
-
-struct udp_sock {
-	/* inet_sock has to be the first member */
-	struct inet_sock inet;
-#define udp_port_hash		inet.sk.__sk_common.skc_u16hashes[0]
-#define udp_portaddr_hash	inet.sk.__sk_common.skc_u16hashes[1]
-#define udp_portaddr_node	inet.sk.__sk_common.skc_portaddr_node
-	int		 pending;	/* Any pending frames ? */
-	unsigned int	 corkflag;	/* Cork is required */
-  	__u16		 encap_type;	/* Is this an Encapsulation socket? */
-	/*
-	 * Following member retains the information to create a UDP header
-	 * when the socket is uncorked.
-	 */
-	__u16		 len;		/* total length of pending frames */
-	/*
-	 * Fields specific to UDP-Lite.
-	 */
-	__u16		 pcslen;
-	__u16		 pcrlen;
-/* indicator bits used by pcflag: */
-#define UDPLITE_BIT      0x1  		/* set by udplite proto init function */
-#define UDPLITE_SEND_CC  0x2  		/* set via udplite setsockopt         */
-#define UDPLITE_RECV_CC  0x4		/* set via udplite setsocktopt        */
-	__u8		 pcflag;        /* marks socket as UDP-Lite if > 0    */
-	__u8		 unused[3];
-	/*
-	 * For encapsulation sockets.
-	 */
-	int (*encap_rcv)(struct sock *sk, struct sk_buff *skb);
-};
-
-static inline struct udp_sock *udp_sk(const struct sock *sk)
-{
-	return (struct udp_sock *)sk;
-}
-
-#define udp_portaddr_for_each_entry(__sk, node, list) \
-	hlist_nulls_for_each_entry(__sk, node, list, __sk_common.skc_portaddr_node)
-
-#define udp_portaddr_for_each_entry_rcu(__sk, node, list) \
-	hlist_nulls_for_each_entry_rcu(__sk, node, list, __sk_common.skc_portaddr_node)
-
-#define IS_UDPLITE(__sk) (udp_sk(__sk)->pcflag)
-
-#endif
-
-#endif	/* _LINUX_UDP_H */
diff --git a/ANDROID_3.4.5/include/linux/uhid.h b/ANDROID_3.4.5/include/linux/uhid.h
deleted file mode 100644
index 9c6974f1..00000000
--- a/ANDROID_3.4.5/include/linux/uhid.h
+++ /dev/null
@@ -1,104 +0,0 @@
-#ifndef __UHID_H_
-#define __UHID_H_
-
-/*
- * User-space I/O driver support for HID subsystem
- * Copyright (c) 2012 David Herrmann
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the Free
- * Software Foundation; either version 2 of the License, or (at your option)
- * any later version.
- */
-
-/*
- * Public header for user-space communication. We try to keep every structure
- * aligned but to be safe we also use __attribute__((__packed__)). Therefore,
- * the communication should be ABI compatible even between architectures.
- */
-
-#include <linux/input.h>
-#include <linux/types.h>
-
-enum uhid_event_type {
-	UHID_CREATE,
-	UHID_DESTROY,
-	UHID_START,
-	UHID_STOP,
-	UHID_OPEN,
-	UHID_CLOSE,
-	UHID_OUTPUT,
-	UHID_OUTPUT_EV,
-	UHID_INPUT,
-	UHID_FEATURE,
-	UHID_FEATURE_ANSWER,
-};
-
-struct uhid_create_req {
-	__u8 name[128];
-	__u8 phys[64];
-	__u8 uniq[64];
-	__u8 __user *rd_data;
-	__u16 rd_size;
-
-	__u16 bus;
-	__u32 vendor;
-	__u32 product;
-	__u32 version;
-	__u32 country;
-} __attribute__((__packed__));
-
-#define UHID_DATA_MAX 4096
-
-enum uhid_report_type {
-	UHID_FEATURE_REPORT,
-	UHID_OUTPUT_REPORT,
-	UHID_INPUT_REPORT,
-};
-
-struct uhid_input_req {
-	__u8 data[UHID_DATA_MAX];
-	__u16 size;
-} __attribute__((__packed__));
-
-struct uhid_output_req {
-	__u8 data[UHID_DATA_MAX];
-	__u16 size;
-	__u8 rtype;
-} __attribute__((__packed__));
-
-struct uhid_output_ev_req {
-	__u16 type;
-	__u16 code;
-	__s32 value;
-} __attribute__((__packed__));
-
-struct uhid_feature_req {
-	__u32 id;
-	__u8 rnum;
-	__u8 rtype;
-} __attribute__((__packed__));
-
-struct uhid_feature_answer_req {
-	__u32 id;
-	__u16 err;
-	__u16 size;
-	__u8 data[UHID_DATA_MAX];
-};
-
-struct uhid_event {
-	__u32 type;
-
-	union {
-		struct uhid_create_req create;
-		struct uhid_input_req input;
-		struct uhid_output_req output;
-		struct uhid_output_ev_req output_ev;
-		struct uhid_feature_req feature;
-		struct uhid_feature_answer_req feature_answer;
-	} u;
-} __attribute__((__packed__));
-
-#endif /* __UHID_H_ */
diff --git a/ANDROID_3.4.5/include/linux/uid_stat.h b/ANDROID_3.4.5/include/linux/uid_stat.h
deleted file mode 100644
index 6bd6c4e5..00000000
--- a/ANDROID_3.4.5/include/linux/uid_stat.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/* include/linux/uid_stat.h
- *
- * Copyright (C) 2008-2009 Google, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __uid_stat_h
-#define __uid_stat_h
-
-/* Contains definitions for resource tracking per uid. */
-
-#ifdef CONFIG_UID_STAT
-int uid_stat_tcp_snd(uid_t uid, int size);
-int uid_stat_tcp_rcv(uid_t uid, int size);
-#else
-#define uid_stat_tcp_snd(uid, size) do {} while (0);
-#define uid_stat_tcp_rcv(uid, size) do {} while (0);
-#endif
-
-#endif /* _LINUX_UID_STAT_H */
diff --git a/ANDROID_3.4.5/include/linux/uinput.h b/ANDROID_3.4.5/include/linux/uinput.h
deleted file mode 100644
index 2aa2881b..00000000
--- a/ANDROID_3.4.5/include/linux/uinput.h
+++ /dev/null
@@ -1,176 +0,0 @@
-#ifndef __UINPUT_H_
-#define __UINPUT_H_
-/*
- *  User level driver support for input subsystem
- *
- * Heavily based on evdev.c by Vojtech Pavlik
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- * Author: Aristeu Sergio Rozanski Filho <aris@cathedrallabs.org>
- *
- * Changes/Revisions:
- *	0.3	24/05/2006 (Anssi Hannula <anssi.hannulagmail.com>)
- *		- update ff support for the changes in kernel interface
- *		- add UINPUT_VERSION
- *	0.2	16/10/2004 (Micah Dowty <micah@navi.cx>)
- *		- added force feedback support
- *             - added UI_SET_PHYS
- *	0.1	20/06/2002
- *		- first public version
- */
-
-#include <linux/input.h>
-
-#define UINPUT_VERSION		3
-
-#ifdef __KERNEL__
-#define UINPUT_NAME		"uinput"
-#define UINPUT_BUFFER_SIZE	16
-#define UINPUT_NUM_REQUESTS	16
-
-enum uinput_state { UIST_NEW_DEVICE, UIST_SETUP_COMPLETE, UIST_CREATED };
-
-struct uinput_request {
-	int			id;
-	int			code;	/* UI_FF_UPLOAD, UI_FF_ERASE */
-
-	int			retval;
-	struct completion	done;
-
-	union {
-		int		effect_id;
-		struct {
-			struct ff_effect *effect;
-			struct ff_effect *old;
-		} upload;
-	} u;
-};
-
-struct uinput_device {
-	struct input_dev	*dev;
-	struct mutex		mutex;
-	enum uinput_state	state;
-	wait_queue_head_t	waitq;
-	unsigned char		ready;
-	unsigned char		head;
-	unsigned char		tail;
-	struct input_event	buff[UINPUT_BUFFER_SIZE];
-	unsigned int		ff_effects_max;
-
-	struct uinput_request	*requests[UINPUT_NUM_REQUESTS];
-	wait_queue_head_t	requests_waitq;
-	spinlock_t		requests_lock;
-};
-#endif	/* __KERNEL__ */
-
-struct uinput_ff_upload {
-	int			request_id;
-	int			retval;
-	struct ff_effect	effect;
-	struct ff_effect	old;
-};
-
-struct uinput_ff_erase {
-	int			request_id;
-	int			retval;
-	int			effect_id;
-};
-
-/* ioctl */
-#define UINPUT_IOCTL_BASE	'U'
-#define UI_DEV_CREATE		_IO(UINPUT_IOCTL_BASE, 1)
-#define UI_DEV_DESTROY		_IO(UINPUT_IOCTL_BASE, 2)
-
-#define UI_SET_EVBIT		_IOW(UINPUT_IOCTL_BASE, 100, int)
-#define UI_SET_KEYBIT		_IOW(UINPUT_IOCTL_BASE, 101, int)
-#define UI_SET_RELBIT		_IOW(UINPUT_IOCTL_BASE, 102, int)
-#define UI_SET_ABSBIT		_IOW(UINPUT_IOCTL_BASE, 103, int)
-#define UI_SET_MSCBIT		_IOW(UINPUT_IOCTL_BASE, 104, int)
-#define UI_SET_LEDBIT		_IOW(UINPUT_IOCTL_BASE, 105, int)
-#define UI_SET_SNDBIT		_IOW(UINPUT_IOCTL_BASE, 106, int)
-#define UI_SET_FFBIT		_IOW(UINPUT_IOCTL_BASE, 107, int)
-#define UI_SET_PHYS		_IOW(UINPUT_IOCTL_BASE, 108, char*)
-#define UI_SET_SWBIT		_IOW(UINPUT_IOCTL_BASE, 109, int)
-#define UI_SET_PROPBIT		_IOW(UINPUT_IOCTL_BASE, 110, int)
-
-#define UI_BEGIN_FF_UPLOAD	_IOWR(UINPUT_IOCTL_BASE, 200, struct uinput_ff_upload)
-#define UI_END_FF_UPLOAD	_IOW(UINPUT_IOCTL_BASE, 201, struct uinput_ff_upload)
-#define UI_BEGIN_FF_ERASE	_IOWR(UINPUT_IOCTL_BASE, 202, struct uinput_ff_erase)
-#define UI_END_FF_ERASE		_IOW(UINPUT_IOCTL_BASE, 203, struct uinput_ff_erase)
-
-/*
- * To write a force-feedback-capable driver, the upload_effect
- * and erase_effect callbacks in input_dev must be implemented.
- * The uinput driver will generate a fake input event when one of
- * these callbacks are invoked. The userspace code then uses
- * ioctls to retrieve additional parameters and send the return code.
- * The callback blocks until this return code is sent.
- *
- * The described callback mechanism is only used if ff_effects_max
- * is set.
- *
- * To implement upload_effect():
- *   1. Wait for an event with type == EV_UINPUT and code == UI_FF_UPLOAD.
- *      A request ID will be given in 'value'.
- *   2. Allocate a uinput_ff_upload struct, fill in request_id with
- *      the 'value' from the EV_UINPUT event.
- *   3. Issue a UI_BEGIN_FF_UPLOAD ioctl, giving it the
- *      uinput_ff_upload struct. It will be filled in with the
- *      ff_effects passed to upload_effect().
- *   4. Perform the effect upload, and place a return code back into
-        the uinput_ff_upload struct.
- *   5. Issue a UI_END_FF_UPLOAD ioctl, also giving it the
- *      uinput_ff_upload_effect struct. This will complete execution
- *      of our upload_effect() handler.
- *
- * To implement erase_effect():
- *   1. Wait for an event with type == EV_UINPUT and code == UI_FF_ERASE.
- *      A request ID will be given in 'value'.
- *   2. Allocate a uinput_ff_erase struct, fill in request_id with
- *      the 'value' from the EV_UINPUT event.
- *   3. Issue a UI_BEGIN_FF_ERASE ioctl, giving it the
- *      uinput_ff_erase struct. It will be filled in with the
- *      effect ID passed to erase_effect().
- *   4. Perform the effect erasure, and place a return code back
- *      into the uinput_ff_erase struct.
- *   5. Issue a UI_END_FF_ERASE ioctl, also giving it the
- *      uinput_ff_erase_effect struct. This will complete execution
- *      of our erase_effect() handler.
- */
-
-/*
- * This is the new event type, used only by uinput.
- * 'code' is UI_FF_UPLOAD or UI_FF_ERASE, and 'value'
- * is the unique request ID. This number was picked
- * arbitrarily, above EV_MAX (since the input system
- * never sees it) but in the range of a 16-bit int.
- */
-#define EV_UINPUT		0x0101
-#define UI_FF_UPLOAD		1
-#define UI_FF_ERASE		2
-
-#define UINPUT_MAX_NAME_SIZE	80
-struct uinput_user_dev {
-	char name[UINPUT_MAX_NAME_SIZE];
-	struct input_id id;
-	int ff_effects_max;
-	int absmax[ABS_CNT];
-	int absmin[ABS_CNT];
-	int absfuzz[ABS_CNT];
-	int absflat[ABS_CNT];
-};
-#endif	/* __UINPUT_H_ */
-
diff --git a/ANDROID_3.4.5/include/linux/uio.h b/ANDROID_3.4.5/include/linux/uio.h
deleted file mode 100644
index 98c11432..00000000
--- a/ANDROID_3.4.5/include/linux/uio.h
+++ /dev/null
@@ -1,56 +0,0 @@
-#ifndef __LINUX_UIO_H
-#define __LINUX_UIO_H
-
-#include <linux/compiler.h>
-#include <linux/types.h>
-
-/*
- *	Berkeley style UIO structures	-	Alan Cox 1994.
- *
- *		This program is free software; you can redistribute it and/or
- *		modify it under the terms of the GNU General Public License
- *		as published by the Free Software Foundation; either version
- *		2 of the License, or (at your option) any later version.
- */
-
-struct iovec
-{
-	void __user *iov_base;	/* BSD uses caddr_t (1003.1g requires void *) */
-	__kernel_size_t iov_len; /* Must be size_t (1003.1g) */
-};
-
-/*
- *	UIO_MAXIOV shall be at least 16 1003.1g (5.4.1.1)
- */
- 
-#define UIO_FASTIOV	8
-#define UIO_MAXIOV	1024
-
-#ifdef __KERNEL__
-
-struct kvec {
-	void *iov_base; /* and that should *never* hold a userland pointer */
-	size_t iov_len;
-};
-
-/*
- * Total number of bytes covered by an iovec.
- *
- * NOTE that it is not safe to use this function until all the iovec's
- * segment lengths have been validated.  Because the individual lengths can
- * overflow a size_t when added together.
- */
-static inline size_t iov_length(const struct iovec *iov, unsigned long nr_segs)
-{
-	unsigned long seg;
-	size_t ret = 0;
-
-	for (seg = 0; seg < nr_segs; seg++)
-		ret += iov[seg].iov_len;
-	return ret;
-}
-
-unsigned long iov_shorten(struct iovec *iov, unsigned long nr_segs, size_t to);
-#endif
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/uio_driver.h b/ANDROID_3.4.5/include/linux/uio_driver.h
deleted file mode 100644
index 1ad47244..00000000
--- a/ANDROID_3.4.5/include/linux/uio_driver.h
+++ /dev/null
@@ -1,128 +0,0 @@
-/*
- * include/linux/uio_driver.h
- *
- * Copyright(C) 2005, Benedikt Spranger <b.spranger@linutronix.de>
- * Copyright(C) 2005, Thomas Gleixner <tglx@linutronix.de>
- * Copyright(C) 2006, Hans J. Koch <hjk@hansjkoch.de>
- * Copyright(C) 2006, Greg Kroah-Hartman <greg@kroah.com>
- *
- * Userspace IO driver.
- *
- * Licensed under the GPLv2 only.
- */
-
-#ifndef _UIO_DRIVER_H_
-#define _UIO_DRIVER_H_
-
-#include <linux/fs.h>
-#include <linux/interrupt.h>
-
-struct module;
-struct uio_map;
-
-/**
- * struct uio_mem - description of a UIO memory region
- * @name:		name of the memory region for identification
- * @addr:		address of the device's memory (phys_addr is used since
- * 			addr can be logical, virtual, or physical & phys_addr_t
- * 			should always be large enough to handle any of the
- * 			address types)
- * @size:		size of IO
- * @memtype:		type of memory addr points to
- * @internal_addr:	ioremap-ped version of addr, for driver internal use
- * @map:		for use by the UIO core only.
- */
-struct uio_mem {
-	const char		*name;
-	phys_addr_t		addr;
-	unsigned long		size;
-	int			memtype;
-	void __iomem		*internal_addr;
-	struct uio_map		*map;
-};
-
-#define MAX_UIO_MAPS	5
-
-struct uio_portio;
-
-/**
- * struct uio_port - description of a UIO port region
- * @name:		name of the port region for identification
- * @start:		start of port region
- * @size:		size of port region
- * @porttype:		type of port (see UIO_PORT_* below)
- * @portio:		for use by the UIO core only.
- */
-struct uio_port {
-	const char		*name;
-	unsigned long		start;
-	unsigned long		size;
-	int			porttype;
-	struct uio_portio	*portio;
-};
-
-#define MAX_UIO_PORT_REGIONS	5
-
-struct uio_device;
-
-/**
- * struct uio_info - UIO device capabilities
- * @uio_dev:		the UIO device this info belongs to
- * @name:		device name
- * @version:		device driver version
- * @mem:		list of mappable memory regions, size==0 for end of list
- * @port:		list of port regions, size==0 for end of list
- * @irq:		interrupt number or UIO_IRQ_CUSTOM
- * @irq_flags:		flags for request_irq()
- * @priv:		optional private data
- * @handler:		the device's irq handler
- * @mmap:		mmap operation for this uio device
- * @open:		open operation for this uio device
- * @release:		release operation for this uio device
- * @irqcontrol:		disable/enable irqs when 0/1 is written to /dev/uioX
- */
-struct uio_info {
-	struct uio_device	*uio_dev;
-	const char		*name;
-	const char		*version;
-	struct uio_mem		mem[MAX_UIO_MAPS];
-	struct uio_port		port[MAX_UIO_PORT_REGIONS];
-	long			irq;
-	unsigned long		irq_flags;
-	void			*priv;
-	irqreturn_t (*handler)(int irq, struct uio_info *dev_info);
-	int (*mmap)(struct uio_info *info, struct vm_area_struct *vma);
-	int (*open)(struct uio_info *info, struct inode *inode);
-	int (*release)(struct uio_info *info, struct inode *inode);
-	int (*irqcontrol)(struct uio_info *info, s32 irq_on);
-};
-
-extern int __must_check
-	__uio_register_device(struct module *owner,
-			      struct device *parent,
-			      struct uio_info *info);
-
-/* use a define to avoid include chaining to get THIS_MODULE */
-#define uio_register_device(parent, info) \
-	__uio_register_device(THIS_MODULE, parent, info)
-
-extern void uio_unregister_device(struct uio_info *info);
-extern void uio_event_notify(struct uio_info *info);
-
-/* defines for uio_info->irq */
-#define UIO_IRQ_CUSTOM	-1
-#define UIO_IRQ_NONE	0
-
-/* defines for uio_mem->memtype */
-#define UIO_MEM_NONE	0
-#define UIO_MEM_PHYS	1
-#define UIO_MEM_LOGICAL	2
-#define UIO_MEM_VIRTUAL 3
-
-/* defines for uio_port->porttype */
-#define UIO_PORT_NONE	0
-#define UIO_PORT_X86	1
-#define UIO_PORT_GPIO	2
-#define UIO_PORT_OTHER	3
-
-#endif /* _LINUX_UIO_DRIVER_H_ */
diff --git a/ANDROID_3.4.5/include/linux/ultrasound.h b/ANDROID_3.4.5/include/linux/ultrasound.h
deleted file mode 100644
index 71339dc5..00000000
--- a/ANDROID_3.4.5/include/linux/ultrasound.h
+++ /dev/null
@@ -1,103 +0,0 @@
-#ifndef _ULTRASOUND_H_
-#define _ULTRASOUND_H_
-/*
- *	ultrasound.h - Macros for programming the Gravis Ultrasound
- *			These macros are extremely device dependent
- *			and not portable.
- */
-/*
- * Copyright (C) by Hannu Savolainen 1993-1997
- *
- * OSS/Free for Linux is distributed under the GNU GENERAL PUBLIC LICENSE (GPL)
- * Version 2 (June 1991). See the "COPYING" file distributed with this software
- * for more info.
- */
-
-
-/*
- *	Private events for Gravis Ultrasound (GUS)
- *
- *	Format:
- *		byte 0 		- SEQ_PRIVATE (0xfe)
- *		byte 1 		- Synthesizer device number (0-N)
- *		byte 2 		- Command (see below)
- *		byte 3 		- Voice number (0-31)
- *		bytes 4 and 5	- parameter P1 (unsigned short)
- *		bytes 6 and 7	- parameter P2 (unsigned short)
- *
- *	Commands:
- *		Each command affects one voice defined in byte 3.
- *		Unused parameters (P1 and/or P2 *MUST* be initialized to zero).
- *		_GUS_NUMVOICES	- Sets max. number of concurrent voices (P1=14-31, default 16)
- *		_GUS_VOICESAMPLE- ************ OBSOLETE *************
- *		_GUS_VOICEON	- Starts voice (P1=voice mode)
- *		_GUS_VOICEOFF	- Stops voice (no parameters)
- *		_GUS_VOICEFADE	- Stops the voice smoothly.
- *		_GUS_VOICEMODE	- Alters the voice mode, don't start or stop voice (P1=voice mode)
- *		_GUS_VOICEBALA	- Sets voice balance (P1, 0=left, 7=middle and 15=right, default 7)
- *		_GUS_VOICEFREQ	- Sets voice (sample) playback frequency (P1=Hz)
- *		_GUS_VOICEVOL	- Sets voice volume (P1=volume, 0xfff=max, 0xeff=half, 0x000=off)
- *		_GUS_VOICEVOL2	- Sets voice volume (P1=volume, 0xfff=max, 0xeff=half, 0x000=off)
- *				  (Like GUS_VOICEVOL but doesn't change the hw
- *				  volume. It just updates volume in the voice table).
- *
- *		_GUS_RAMPRANGE	- Sets limits for volume ramping (P1=low volume, P2=high volume)
- *		_GUS_RAMPRATE	- Sets the speed for volume ramping (P1=scale, P2=rate)
- *		_GUS_RAMPMODE	- Sets the volume ramping mode (P1=ramping mode)
- *		_GUS_RAMPON	- Starts volume ramping (no parameters)
- *		_GUS_RAMPOFF	- Stops volume ramping (no parameters)
- *		_GUS_VOLUME_SCALE - Changes the volume calculation constants
- *				  for all voices.
- */
-
-#define _GUS_NUMVOICES		0x00
-#define _GUS_VOICESAMPLE	0x01	/* OBSOLETE */
-#define _GUS_VOICEON		0x02
-#define _GUS_VOICEOFF		0x03
-#define _GUS_VOICEMODE		0x04
-#define _GUS_VOICEBALA		0x05
-#define _GUS_VOICEFREQ		0x06
-#define _GUS_VOICEVOL		0x07
-#define _GUS_RAMPRANGE		0x08
-#define _GUS_RAMPRATE		0x09
-#define _GUS_RAMPMODE		0x0a
-#define _GUS_RAMPON		0x0b
-#define _GUS_RAMPOFF		0x0c
-#define _GUS_VOICEFADE		0x0d
-#define _GUS_VOLUME_SCALE	0x0e
-#define _GUS_VOICEVOL2		0x0f
-#define _GUS_VOICE_POS		0x10
-
-/*
- *	GUS API macros
- */
-
-#define _GUS_CMD(chn, voice, cmd, p1, p2) \
-					{_SEQ_NEEDBUF(8); _seqbuf[_seqbufptr] = SEQ_PRIVATE;\
-					_seqbuf[_seqbufptr+1] = (chn); _seqbuf[_seqbufptr+2] = cmd;\
-					_seqbuf[_seqbufptr+3] = voice;\
-					*(unsigned short*)&_seqbuf[_seqbufptr+4] = p1;\
-					*(unsigned short*)&_seqbuf[_seqbufptr+6] = p2;\
-					_SEQ_ADVBUF(8);}
-
-#define GUS_NUMVOICES(chn, p1)			_GUS_CMD(chn, 0, _GUS_NUMVOICES, (p1), 0)
-#define GUS_VOICESAMPLE(chn, voice, p1)		_GUS_CMD(chn, voice, _GUS_VOICESAMPLE, (p1), 0)	/* OBSOLETE */
-#define GUS_VOICEON(chn, voice, p1)		_GUS_CMD(chn, voice, _GUS_VOICEON, (p1), 0)
-#define GUS_VOICEOFF(chn, voice)		_GUS_CMD(chn, voice, _GUS_VOICEOFF, 0, 0)
-#define GUS_VOICEFADE(chn, voice)		_GUS_CMD(chn, voice, _GUS_VOICEFADE, 0, 0)
-#define GUS_VOICEMODE(chn, voice, p1)		_GUS_CMD(chn, voice, _GUS_VOICEMODE, (p1), 0)
-#define GUS_VOICEBALA(chn, voice, p1)		_GUS_CMD(chn, voice, _GUS_VOICEBALA, (p1), 0)
-#define GUS_VOICEFREQ(chn, voice, p)		_GUS_CMD(chn, voice, _GUS_VOICEFREQ, \
-							(p) & 0xffff, ((p) >> 16) & 0xffff)
-#define GUS_VOICEVOL(chn, voice, p1)		_GUS_CMD(chn, voice, _GUS_VOICEVOL, (p1), 0)
-#define GUS_VOICEVOL2(chn, voice, p1)		_GUS_CMD(chn, voice, _GUS_VOICEVOL2, (p1), 0)
-#define GUS_RAMPRANGE(chn, voice, low, high)	_GUS_CMD(chn, voice, _GUS_RAMPRANGE, (low), (high))
-#define GUS_RAMPRATE(chn, voice, p1, p2)	_GUS_CMD(chn, voice, _GUS_RAMPRATE, (p1), (p2))
-#define GUS_RAMPMODE(chn, voice, p1)		_GUS_CMD(chn, voice, _GUS_RAMPMODE, (p1), 0)
-#define GUS_RAMPON(chn, voice, p1)		_GUS_CMD(chn, voice, _GUS_RAMPON, (p1), 0)
-#define GUS_RAMPOFF(chn, voice)			_GUS_CMD(chn, voice, _GUS_RAMPOFF, 0, 0)
-#define GUS_VOLUME_SCALE(chn, voice, p1, p2)	_GUS_CMD(chn, voice, _GUS_VOLUME_SCALE, (p1), (p2))
-#define GUS_VOICE_POS(chn, voice, p)		_GUS_CMD(chn, voice, _GUS_VOICE_POS, \
-							(p) & 0xffff, ((p) >> 16) & 0xffff)
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/un.h b/ANDROID_3.4.5/include/linux/un.h
deleted file mode 100644
index 3ed3e46c..00000000
--- a/ANDROID_3.4.5/include/linux/un.h
+++ /dev/null
@@ -1,13 +0,0 @@
-#ifndef _LINUX_UN_H
-#define _LINUX_UN_H
-
-#include <linux/socket.h>
-
-#define UNIX_PATH_MAX	108
-
-struct sockaddr_un {
-	__kernel_sa_family_t sun_family; /* AF_UNIX */
-	char sun_path[UNIX_PATH_MAX];	/* pathname */
-};
-
-#endif /* _LINUX_UN_H */
diff --git a/ANDROID_3.4.5/include/linux/unaligned/access_ok.h b/ANDROID_3.4.5/include/linux/unaligned/access_ok.h
deleted file mode 100644
index 99c1b4d2..00000000
--- a/ANDROID_3.4.5/include/linux/unaligned/access_ok.h
+++ /dev/null
@@ -1,67 +0,0 @@
-#ifndef _LINUX_UNALIGNED_ACCESS_OK_H
-#define _LINUX_UNALIGNED_ACCESS_OK_H
-
-#include <linux/kernel.h>
-#include <asm/byteorder.h>
-
-static inline u16 get_unaligned_le16(const void *p)
-{
-	return le16_to_cpup((__le16 *)p);
-}
-
-static inline u32 get_unaligned_le32(const void *p)
-{
-	return le32_to_cpup((__le32 *)p);
-}
-
-static inline u64 get_unaligned_le64(const void *p)
-{
-	return le64_to_cpup((__le64 *)p);
-}
-
-static inline u16 get_unaligned_be16(const void *p)
-{
-	return be16_to_cpup((__be16 *)p);
-}
-
-static inline u32 get_unaligned_be32(const void *p)
-{
-	return be32_to_cpup((__be32 *)p);
-}
-
-static inline u64 get_unaligned_be64(const void *p)
-{
-	return be64_to_cpup((__be64 *)p);
-}
-
-static inline void put_unaligned_le16(u16 val, void *p)
-{
-	*((__le16 *)p) = cpu_to_le16(val);
-}
-
-static inline void put_unaligned_le32(u32 val, void *p)
-{
-	*((__le32 *)p) = cpu_to_le32(val);
-}
-
-static inline void put_unaligned_le64(u64 val, void *p)
-{
-	*((__le64 *)p) = cpu_to_le64(val);
-}
-
-static inline void put_unaligned_be16(u16 val, void *p)
-{
-	*((__be16 *)p) = cpu_to_be16(val);
-}
-
-static inline void put_unaligned_be32(u32 val, void *p)
-{
-	*((__be32 *)p) = cpu_to_be32(val);
-}
-
-static inline void put_unaligned_be64(u64 val, void *p)
-{
-	*((__be64 *)p) = cpu_to_be64(val);
-}
-
-#endif /* _LINUX_UNALIGNED_ACCESS_OK_H */
diff --git a/ANDROID_3.4.5/include/linux/unaligned/be_byteshift.h b/ANDROID_3.4.5/include/linux/unaligned/be_byteshift.h
deleted file mode 100644
index 9356b242..00000000
--- a/ANDROID_3.4.5/include/linux/unaligned/be_byteshift.h
+++ /dev/null
@@ -1,70 +0,0 @@
-#ifndef _LINUX_UNALIGNED_BE_BYTESHIFT_H
-#define _LINUX_UNALIGNED_BE_BYTESHIFT_H
-
-#include <linux/types.h>
-
-static inline u16 __get_unaligned_be16(const u8 *p)
-{
-	return p[0] << 8 | p[1];
-}
-
-static inline u32 __get_unaligned_be32(const u8 *p)
-{
-	return p[0] << 24 | p[1] << 16 | p[2] << 8 | p[3];
-}
-
-static inline u64 __get_unaligned_be64(const u8 *p)
-{
-	return (u64)__get_unaligned_be32(p) << 32 |
-	       __get_unaligned_be32(p + 4);
-}
-
-static inline void __put_unaligned_be16(u16 val, u8 *p)
-{
-	*p++ = val >> 8;
-	*p++ = val;
-}
-
-static inline void __put_unaligned_be32(u32 val, u8 *p)
-{
-	__put_unaligned_be16(val >> 16, p);
-	__put_unaligned_be16(val, p + 2);
-}
-
-static inline void __put_unaligned_be64(u64 val, u8 *p)
-{
-	__put_unaligned_be32(val >> 32, p);
-	__put_unaligned_be32(val, p + 4);
-}
-
-static inline u16 get_unaligned_be16(const void *p)
-{
-	return __get_unaligned_be16((const u8 *)p);
-}
-
-static inline u32 get_unaligned_be32(const void *p)
-{
-	return __get_unaligned_be32((const u8 *)p);
-}
-
-static inline u64 get_unaligned_be64(const void *p)
-{
-	return __get_unaligned_be64((const u8 *)p);
-}
-
-static inline void put_unaligned_be16(u16 val, void *p)
-{
-	__put_unaligned_be16(val, p);
-}
-
-static inline void put_unaligned_be32(u32 val, void *p)
-{
-	__put_unaligned_be32(val, p);
-}
-
-static inline void put_unaligned_be64(u64 val, void *p)
-{
-	__put_unaligned_be64(val, p);
-}
-
-#endif /* _LINUX_UNALIGNED_BE_BYTESHIFT_H */
diff --git a/ANDROID_3.4.5/include/linux/unaligned/be_memmove.h b/ANDROID_3.4.5/include/linux/unaligned/be_memmove.h
deleted file mode 100644
index c2a76c5c..00000000
--- a/ANDROID_3.4.5/include/linux/unaligned/be_memmove.h
+++ /dev/null
@@ -1,36 +0,0 @@
-#ifndef _LINUX_UNALIGNED_BE_MEMMOVE_H
-#define _LINUX_UNALIGNED_BE_MEMMOVE_H
-
-#include <linux/unaligned/memmove.h>
-
-static inline u16 get_unaligned_be16(const void *p)
-{
-	return __get_unaligned_memmove16((const u8 *)p);
-}
-
-static inline u32 get_unaligned_be32(const void *p)
-{
-	return __get_unaligned_memmove32((const u8 *)p);
-}
-
-static inline u64 get_unaligned_be64(const void *p)
-{
-	return __get_unaligned_memmove64((const u8 *)p);
-}
-
-static inline void put_unaligned_be16(u16 val, void *p)
-{
-	__put_unaligned_memmove16(val, p);
-}
-
-static inline void put_unaligned_be32(u32 val, void *p)
-{
-	__put_unaligned_memmove32(val, p);
-}
-
-static inline void put_unaligned_be64(u64 val, void *p)
-{
-	__put_unaligned_memmove64(val, p);
-}
-
-#endif /* _LINUX_UNALIGNED_LE_MEMMOVE_H */
diff --git a/ANDROID_3.4.5/include/linux/unaligned/be_struct.h b/ANDROID_3.4.5/include/linux/unaligned/be_struct.h
deleted file mode 100644
index 13241583..00000000
--- a/ANDROID_3.4.5/include/linux/unaligned/be_struct.h
+++ /dev/null
@@ -1,36 +0,0 @@
-#ifndef _LINUX_UNALIGNED_BE_STRUCT_H
-#define _LINUX_UNALIGNED_BE_STRUCT_H
-
-#include <linux/unaligned/packed_struct.h>
-
-static inline u16 get_unaligned_be16(const void *p)
-{
-	return __get_unaligned_cpu16((const u8 *)p);
-}
-
-static inline u32 get_unaligned_be32(const void *p)
-{
-	return __get_unaligned_cpu32((const u8 *)p);
-}
-
-static inline u64 get_unaligned_be64(const void *p)
-{
-	return __get_unaligned_cpu64((const u8 *)p);
-}
-
-static inline void put_unaligned_be16(u16 val, void *p)
-{
-	__put_unaligned_cpu16(val, p);
-}
-
-static inline void put_unaligned_be32(u32 val, void *p)
-{
-	__put_unaligned_cpu32(val, p);
-}
-
-static inline void put_unaligned_be64(u64 val, void *p)
-{
-	__put_unaligned_cpu64(val, p);
-}
-
-#endif /* _LINUX_UNALIGNED_BE_STRUCT_H */
diff --git a/ANDROID_3.4.5/include/linux/unaligned/generic.h b/ANDROID_3.4.5/include/linux/unaligned/generic.h
deleted file mode 100644
index 02d97ff3..00000000
--- a/ANDROID_3.4.5/include/linux/unaligned/generic.h
+++ /dev/null
@@ -1,68 +0,0 @@
-#ifndef _LINUX_UNALIGNED_GENERIC_H
-#define _LINUX_UNALIGNED_GENERIC_H
-
-/*
- * Cause a link-time error if we try an unaligned access other than
- * 1,2,4 or 8 bytes long
- */
-extern void __bad_unaligned_access_size(void);
-
-#define __get_unaligned_le(ptr) ((__force typeof(*(ptr)))({			\
-	__builtin_choose_expr(sizeof(*(ptr)) == 1, *(ptr),			\
-	__builtin_choose_expr(sizeof(*(ptr)) == 2, get_unaligned_le16((ptr)),	\
-	__builtin_choose_expr(sizeof(*(ptr)) == 4, get_unaligned_le32((ptr)),	\
-	__builtin_choose_expr(sizeof(*(ptr)) == 8, get_unaligned_le64((ptr)),	\
-	__bad_unaligned_access_size()))));					\
-	}))
-
-#define __get_unaligned_be(ptr) ((__force typeof(*(ptr)))({			\
-	__builtin_choose_expr(sizeof(*(ptr)) == 1, *(ptr),			\
-	__builtin_choose_expr(sizeof(*(ptr)) == 2, get_unaligned_be16((ptr)),	\
-	__builtin_choose_expr(sizeof(*(ptr)) == 4, get_unaligned_be32((ptr)),	\
-	__builtin_choose_expr(sizeof(*(ptr)) == 8, get_unaligned_be64((ptr)),	\
-	__bad_unaligned_access_size()))));					\
-	}))
-
-#define __put_unaligned_le(val, ptr) ({					\
-	void *__gu_p = (ptr);						\
-	switch (sizeof(*(ptr))) {					\
-	case 1:								\
-		*(u8 *)__gu_p = (__force u8)(val);			\
-		break;							\
-	case 2:								\
-		put_unaligned_le16((__force u16)(val), __gu_p);		\
-		break;							\
-	case 4:								\
-		put_unaligned_le32((__force u32)(val), __gu_p);		\
-		break;							\
-	case 8:								\
-		put_unaligned_le64((__force u64)(val), __gu_p);		\
-		break;							\
-	default:							\
-		__bad_unaligned_access_size();				\
-		break;							\
-	}								\
-	(void)0; })
-
-#define __put_unaligned_be(val, ptr) ({					\
-	void *__gu_p = (ptr);						\
-	switch (sizeof(*(ptr))) {					\
-	case 1:								\
-		*(u8 *)__gu_p = (__force u8)(val);			\
-		break;							\
-	case 2:								\
-		put_unaligned_be16((__force u16)(val), __gu_p);		\
-		break;							\
-	case 4:								\
-		put_unaligned_be32((__force u32)(val), __gu_p);		\
-		break;							\
-	case 8:								\
-		put_unaligned_be64((__force u64)(val), __gu_p);		\
-		break;							\
-	default:							\
-		__bad_unaligned_access_size();				\
-		break;							\
-	}								\
-	(void)0; })
-
-#endif /* _LINUX_UNALIGNED_GENERIC_H */
diff --git a/ANDROID_3.4.5/include/linux/unaligned/le_byteshift.h b/ANDROID_3.4.5/include/linux/unaligned/le_byteshift.h
deleted file mode 100644
index be376fb7..00000000
--- a/ANDROID_3.4.5/include/linux/unaligned/le_byteshift.h
+++ /dev/null
@@ -1,70 +0,0 @@
-#ifndef _LINUX_UNALIGNED_LE_BYTESHIFT_H
-#define _LINUX_UNALIGNED_LE_BYTESHIFT_H
-
-#include <linux/types.h>
-
-static inline u16 __get_unaligned_le16(const u8 *p)
-{
-	return p[0] | p[1] << 8;
-}
-
-static inline u32 __get_unaligned_le32(const u8 *p)
-{
-	return p[0] | p[1] << 8 | p[2] << 16 | p[3] << 24;
-}
-
-static inline u64 __get_unaligned_le64(const u8 *p)
-{
-	return (u64)__get_unaligned_le32(p + 4) << 32 |
-	       __get_unaligned_le32(p);
-}
-
-static inline void __put_unaligned_le16(u16 val, u8 *p)
-{
-	*p++ = val;
-	*p++ = val >> 8;
-}
-
-static inline void __put_unaligned_le32(u32 val, u8 *p)
-{
-	__put_unaligned_le16(val >> 16, p + 2);
-	__put_unaligned_le16(val, p);
-}
-
-static inline void __put_unaligned_le64(u64 val, u8 *p)
-{
-	__put_unaligned_le32(val >> 32, p + 4);
-	__put_unaligned_le32(val, p);
-}
-
-static inline u16 get_unaligned_le16(const void *p)
-{
-	return __get_unaligned_le16((const u8 *)p);
-}
-
-static inline u32 get_unaligned_le32(const void *p)
-{
-	return __get_unaligned_le32((const u8 *)p);
-}
-
-static inline u64 get_unaligned_le64(const void *p)
-{
-	return __get_unaligned_le64((const u8 *)p);
-}
-
-static inline void put_unaligned_le16(u16 val, void *p)
-{
-	__put_unaligned_le16(val, p);
-}
-
-static inline void put_unaligned_le32(u32 val, void *p)
-{
-	__put_unaligned_le32(val, p);
-}
-
-static inline void put_unaligned_le64(u64 val, void *p)
-{
-	__put_unaligned_le64(val, p);
-}
-
-#endif /* _LINUX_UNALIGNED_LE_BYTESHIFT_H */
diff --git a/ANDROID_3.4.5/include/linux/unaligned/le_memmove.h b/ANDROID_3.4.5/include/linux/unaligned/le_memmove.h
deleted file mode 100644
index 269849be..00000000
--- a/ANDROID_3.4.5/include/linux/unaligned/le_memmove.h
+++ /dev/null
@@ -1,36 +0,0 @@
-#ifndef _LINUX_UNALIGNED_LE_MEMMOVE_H
-#define _LINUX_UNALIGNED_LE_MEMMOVE_H
-
-#include <linux/unaligned/memmove.h>
-
-static inline u16 get_unaligned_le16(const void *p)
-{
-	return __get_unaligned_memmove16((const u8 *)p);
-}
-
-static inline u32 get_unaligned_le32(const void *p)
-{
-	return __get_unaligned_memmove32((const u8 *)p);
-}
-
-static inline u64 get_unaligned_le64(const void *p)
-{
-	return __get_unaligned_memmove64((const u8 *)p);
-}
-
-static inline void put_unaligned_le16(u16 val, void *p)
-{
-	__put_unaligned_memmove16(val, p);
-}
-
-static inline void put_unaligned_le32(u32 val, void *p)
-{
-	__put_unaligned_memmove32(val, p);
-}
-
-static inline void put_unaligned_le64(u64 val, void *p)
-{
-	__put_unaligned_memmove64(val, p);
-}
-
-#endif /* _LINUX_UNALIGNED_LE_MEMMOVE_H */
diff --git a/ANDROID_3.4.5/include/linux/unaligned/le_struct.h b/ANDROID_3.4.5/include/linux/unaligned/le_struct.h
deleted file mode 100644
index 088c4572..00000000
--- a/ANDROID_3.4.5/include/linux/unaligned/le_struct.h
+++ /dev/null
@@ -1,36 +0,0 @@
-#ifndef _LINUX_UNALIGNED_LE_STRUCT_H
-#define _LINUX_UNALIGNED_LE_STRUCT_H
-
-#include <linux/unaligned/packed_struct.h>
-
-static inline u16 get_unaligned_le16(const void *p)
-{
-	return __get_unaligned_cpu16((const u8 *)p);
-}
-
-static inline u32 get_unaligned_le32(const void *p)
-{
-	return __get_unaligned_cpu32((const u8 *)p);
-}
-
-static inline u64 get_unaligned_le64(const void *p)
-{
-	return __get_unaligned_cpu64((const u8 *)p);
-}
-
-static inline void put_unaligned_le16(u16 val, void *p)
-{
-	__put_unaligned_cpu16(val, p);
-}
-
-static inline void put_unaligned_le32(u32 val, void *p)
-{
-	__put_unaligned_cpu32(val, p);
-}
-
-static inline void put_unaligned_le64(u64 val, void *p)
-{
-	__put_unaligned_cpu64(val, p);
-}
-
-#endif /* _LINUX_UNALIGNED_LE_STRUCT_H */
diff --git a/ANDROID_3.4.5/include/linux/unaligned/memmove.h b/ANDROID_3.4.5/include/linux/unaligned/memmove.h
deleted file mode 100644
index eeb5a779..00000000
--- a/ANDROID_3.4.5/include/linux/unaligned/memmove.h
+++ /dev/null
@@ -1,45 +0,0 @@
-#ifndef _LINUX_UNALIGNED_MEMMOVE_H
-#define _LINUX_UNALIGNED_MEMMOVE_H
-
-#include <linux/kernel.h>
-#include <linux/string.h>
-
-/* Use memmove here, so gcc does not insert a __builtin_memcpy. */
-
-static inline u16 __get_unaligned_memmove16(const void *p)
-{
-	u16 tmp;
-	memmove(&tmp, p, 2);
-	return tmp;
-}
-
-static inline u32 __get_unaligned_memmove32(const void *p)
-{
-	u32 tmp;
-	memmove(&tmp, p, 4);
-	return tmp;
-}
-
-static inline u64 __get_unaligned_memmove64(const void *p)
-{
-	u64 tmp;
-	memmove(&tmp, p, 8);
-	return tmp;
-}
-
-static inline void __put_unaligned_memmove16(u16 val, void *p)
-{
-	memmove(p, &val, 2);
-}
-
-static inline void __put_unaligned_memmove32(u32 val, void *p)
-{
-	memmove(p, &val, 4);
-}
-
-static inline void __put_unaligned_memmove64(u64 val, void *p)
-{
-	memmove(p, &val, 8);
-}
-
-#endif /* _LINUX_UNALIGNED_MEMMOVE_H */
diff --git a/ANDROID_3.4.5/include/linux/unaligned/packed_struct.h b/ANDROID_3.4.5/include/linux/unaligned/packed_struct.h
deleted file mode 100644
index c0d817de..00000000
--- a/ANDROID_3.4.5/include/linux/unaligned/packed_struct.h
+++ /dev/null
@@ -1,46 +0,0 @@
-#ifndef _LINUX_UNALIGNED_PACKED_STRUCT_H
-#define _LINUX_UNALIGNED_PACKED_STRUCT_H
-
-#include <linux/kernel.h>
-
-struct __una_u16 { u16 x; } __packed;
-struct __una_u32 { u32 x; } __packed;
-struct __una_u64 { u64 x; } __packed;
-
-static inline u16 __get_unaligned_cpu16(const void *p)
-{
-	const struct __una_u16 *ptr = (const struct __una_u16 *)p;
-	return ptr->x;
-}
-
-static inline u32 __get_unaligned_cpu32(const void *p)
-{
-	const struct __una_u32 *ptr = (const struct __una_u32 *)p;
-	return ptr->x;
-}
-
-static inline u64 __get_unaligned_cpu64(const void *p)
-{
-	const struct __una_u64 *ptr = (const struct __una_u64 *)p;
-	return ptr->x;
-}
-
-static inline void __put_unaligned_cpu16(u16 val, void *p)
-{
-	struct __una_u16 *ptr = (struct __una_u16 *)p;
-	ptr->x = val;
-}
-
-static inline void __put_unaligned_cpu32(u32 val, void *p)
-{
-	struct __una_u32 *ptr = (struct __una_u32 *)p;
-	ptr->x = val;
-}
-
-static inline void __put_unaligned_cpu64(u64 val, void *p)
-{
-	struct __una_u64 *ptr = (struct __una_u64 *)p;
-	ptr->x = val;
-}
-
-#endif /* _LINUX_UNALIGNED_PACKED_STRUCT_H */
diff --git a/ANDROID_3.4.5/include/linux/unistd.h b/ANDROID_3.4.5/include/linux/unistd.h
deleted file mode 100644
index aa8d5b5e..00000000
--- a/ANDROID_3.4.5/include/linux/unistd.h
+++ /dev/null
@@ -1,9 +0,0 @@
-#ifndef _LINUX_UNISTD_H_
-#define _LINUX_UNISTD_H_
-
-/*
- * Include machine specific syscall numbers
- */
-#include <asm/unistd.h>
-
-#endif /* _LINUX_UNISTD_H_ */
diff --git a/ANDROID_3.4.5/include/linux/unix_diag.h b/ANDROID_3.4.5/include/linux/unix_diag.h
deleted file mode 100644
index b1d2bf16..00000000
--- a/ANDROID_3.4.5/include/linux/unix_diag.h
+++ /dev/null
@@ -1,54 +0,0 @@
-#ifndef __UNIX_DIAG_H__
-#define __UNIX_DIAG_H__
-
-#include <linux/types.h>
-
-struct unix_diag_req {
-	__u8	sdiag_family;
-	__u8	sdiag_protocol;
-	__u16	pad;
-	__u32	udiag_states;
-	__u32	udiag_ino;
-	__u32	udiag_show;
-	__u32	udiag_cookie[2];
-};
-
-#define UDIAG_SHOW_NAME		0x00000001	/* show name (not path) */
-#define UDIAG_SHOW_VFS		0x00000002	/* show VFS inode info */
-#define UDIAG_SHOW_PEER		0x00000004	/* show peer socket info */
-#define UDIAG_SHOW_ICONS	0x00000008	/* show pending connections */
-#define UDIAG_SHOW_RQLEN	0x00000010	/* show skb receive queue len */
-#define UDIAG_SHOW_MEMINFO	0x00000020	/* show memory info of a socket */
-
-struct unix_diag_msg {
-	__u8	udiag_family;
-	__u8	udiag_type;
-	__u8	udiag_state;
-	__u8	pad;
-
-	__u32	udiag_ino;
-	__u32	udiag_cookie[2];
-};
-
-enum {
-	UNIX_DIAG_NAME,
-	UNIX_DIAG_VFS,
-	UNIX_DIAG_PEER,
-	UNIX_DIAG_ICONS,
-	UNIX_DIAG_RQLEN,
-	UNIX_DIAG_MEMINFO,
-
-	UNIX_DIAG_MAX,
-};
-
-struct unix_diag_vfs {
-	__u32	udiag_vfs_ino;
-	__u32	udiag_vfs_dev;
-};
-
-struct unix_diag_rqlen {
-	__u32	udiag_rqueue;
-	__u32	udiag_wqueue;
-};
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/usb.h b/ANDROID_3.4.5/include/linux/usb.h
deleted file mode 100644
index 90f35bbe..00000000
--- a/ANDROID_3.4.5/include/linux/usb.h
+++ /dev/null
@@ -1,1669 +0,0 @@
-#ifndef __LINUX_USB_H
-#define __LINUX_USB_H
-
-#include <linux/mod_devicetable.h>
-#include <linux/usb/ch9.h>
-
-#define USB_MAJOR			180
-#define USB_DEVICE_MAJOR		189
-
-
-#ifdef __KERNEL__
-
-#include <linux/errno.h>        /* for -ENODEV */
-#include <linux/delay.h>	/* for mdelay() */
-#include <linux/interrupt.h>	/* for in_interrupt() */
-#include <linux/list.h>		/* for struct list_head */
-#include <linux/kref.h>		/* for struct kref */
-#include <linux/device.h>	/* for struct device */
-#include <linux/fs.h>		/* for struct file_operations */
-#include <linux/completion.h>	/* for struct completion */
-#include <linux/sched.h>	/* for current && schedule_timeout */
-#include <linux/mutex.h>	/* for struct mutex */
-#include <linux/pm_runtime.h>	/* for runtime PM */
-
-struct usb_device;
-struct usb_driver;
-struct wusb_dev;
-
-/*-------------------------------------------------------------------------*/
-
-/*
- * Host-side wrappers for standard USB descriptors ... these are parsed
- * from the data provided by devices.  Parsing turns them from a flat
- * sequence of descriptors into a hierarchy:
- *
- *  - devices have one (usually) or more configs;
- *  - configs have one (often) or more interfaces;
- *  - interfaces have one (usually) or more settings;
- *  - each interface setting has zero or (usually) more endpoints.
- *  - a SuperSpeed endpoint has a companion descriptor
- *
- * And there might be other descriptors mixed in with those.
- *
- * Devices may also have class-specific or vendor-specific descriptors.
- */
-
-struct ep_device;
-
-/**
- * struct usb_host_endpoint - host-side endpoint descriptor and queue
- * @desc: descriptor for this endpoint, wMaxPacketSize in native byteorder
- * @ss_ep_comp: SuperSpeed companion descriptor for this endpoint
- * @urb_list: urbs queued to this endpoint; maintained by usbcore
- * @hcpriv: for use by HCD; typically holds hardware dma queue head (QH)
- *	with one or more transfer descriptors (TDs) per urb
- * @ep_dev: ep_device for sysfs info
- * @extra: descriptors following this endpoint in the configuration
- * @extralen: how many bytes of "extra" are valid
- * @enabled: URBs may be submitted to this endpoint
- *
- * USB requests are always queued to a given endpoint, identified by a
- * descriptor within an active interface in a given USB configuration.
- */
-struct usb_host_endpoint {
-	struct usb_endpoint_descriptor		desc;
-	struct usb_ss_ep_comp_descriptor	ss_ep_comp;
-	struct list_head		urb_list;
-	void				*hcpriv;
-	struct ep_device		*ep_dev;	/* For sysfs info */
-
-	unsigned char *extra;   /* Extra descriptors */
-	int extralen;
-	int enabled;
-};
-
-/* host-side wrapper for one interface setting's parsed descriptors */
-struct usb_host_interface {
-	struct usb_interface_descriptor	desc;
-
-	/* array of desc.bNumEndpoint endpoints associated with this
-	 * interface setting.  these will be in no particular order.
-	 */
-	struct usb_host_endpoint *endpoint;
-
-	char *string;		/* iInterface string, if present */
-	unsigned char *extra;   /* Extra descriptors */
-	int extralen;
-};
-
-enum usb_interface_condition {
-	USB_INTERFACE_UNBOUND = 0,
-	USB_INTERFACE_BINDING,
-	USB_INTERFACE_BOUND,
-	USB_INTERFACE_UNBINDING,
-};
-
-/**
- * struct usb_interface - what usb device drivers talk to
- * @altsetting: array of interface structures, one for each alternate
- *	setting that may be selected.  Each one includes a set of
- *	endpoint configurations.  They will be in no particular order.
- * @cur_altsetting: the current altsetting.
- * @num_altsetting: number of altsettings defined.
- * @intf_assoc: interface association descriptor
- * @minor: the minor number assigned to this interface, if this
- *	interface is bound to a driver that uses the USB major number.
- *	If this interface does not use the USB major, this field should
- *	be unused.  The driver should set this value in the probe()
- *	function of the driver, after it has been assigned a minor
- *	number from the USB core by calling usb_register_dev().
- * @condition: binding state of the interface: not bound, binding
- *	(in probe()), bound to a driver, or unbinding (in disconnect())
- * @sysfs_files_created: sysfs attributes exist
- * @ep_devs_created: endpoint child pseudo-devices exist
- * @unregistering: flag set when the interface is being unregistered
- * @needs_remote_wakeup: flag set when the driver requires remote-wakeup
- *	capability during autosuspend.
- * @needs_altsetting0: flag set when a set-interface request for altsetting 0
- *	has been deferred.
- * @needs_binding: flag set when the driver should be re-probed or unbound
- *	following a reset or suspend operation it doesn't support.
- * @dev: driver model's view of this device
- * @usb_dev: if an interface is bound to the USB major, this will point
- *	to the sysfs representation for that device.
- * @pm_usage_cnt: PM usage counter for this interface
- * @reset_ws: Used for scheduling resets from atomic context.
- * @reset_running: set to 1 if the interface is currently running a
- *      queued reset so that usb_cancel_queued_reset() doesn't try to
- *      remove from the workqueue when running inside the worker
- *      thread. See __usb_queue_reset_device().
- * @resetting_device: USB core reset the device, so use alt setting 0 as
- *	current; needs bandwidth alloc after reset.
- *
- * USB device drivers attach to interfaces on a physical device.  Each
- * interface encapsulates a single high level function, such as feeding
- * an audio stream to a speaker or reporting a change in a volume control.
- * Many USB devices only have one interface.  The protocol used to talk to
- * an interface's endpoints can be defined in a usb "class" specification,
- * or by a product's vendor.  The (default) control endpoint is part of
- * every interface, but is never listed among the interface's descriptors.
- *
- * The driver that is bound to the interface can use standard driver model
- * calls such as dev_get_drvdata() on the dev member of this structure.
- *
- * Each interface may have alternate settings.  The initial configuration
- * of a device sets altsetting 0, but the device driver can change
- * that setting using usb_set_interface().  Alternate settings are often
- * used to control the use of periodic endpoints, such as by having
- * different endpoints use different amounts of reserved USB bandwidth.
- * All standards-conformant USB devices that use isochronous endpoints
- * will use them in non-default settings.
- *
- * The USB specification says that alternate setting numbers must run from
- * 0 to one less than the total number of alternate settings.  But some
- * devices manage to mess this up, and the structures aren't necessarily
- * stored in numerical order anyhow.  Use usb_altnum_to_altsetting() to
- * look up an alternate setting in the altsetting array based on its number.
- */
-struct usb_interface {
-	/* array of alternate settings for this interface,
-	 * stored in no particular order */
-	struct usb_host_interface *altsetting;
-
-	struct usb_host_interface *cur_altsetting;	/* the currently
-					 * active alternate setting */
-	unsigned num_altsetting;	/* number of alternate settings */
-
-	/* If there is an interface association descriptor then it will list
-	 * the associated interfaces */
-	struct usb_interface_assoc_descriptor *intf_assoc;
-
-	int minor;			/* minor number this interface is
-					 * bound to */
-	enum usb_interface_condition condition;		/* state of binding */
-	unsigned sysfs_files_created:1;	/* the sysfs attributes exist */
-	unsigned ep_devs_created:1;	/* endpoint "devices" exist */
-	unsigned unregistering:1;	/* unregistration is in progress */
-	unsigned needs_remote_wakeup:1;	/* driver requires remote wakeup */
-	unsigned needs_altsetting0:1;	/* switch to altsetting 0 is pending */
-	unsigned needs_binding:1;	/* needs delayed unbind/rebind */
-	unsigned reset_running:1;
-	unsigned resetting_device:1;	/* true: bandwidth alloc after reset */
-
-	struct device dev;		/* interface specific device info */
-	struct device *usb_dev;
-	atomic_t pm_usage_cnt;		/* usage counter for autosuspend */
-	struct work_struct reset_ws;	/* for resets in atomic context */
-};
-#define	to_usb_interface(d) container_of(d, struct usb_interface, dev)
-
-static inline void *usb_get_intfdata(struct usb_interface *intf)
-{
-	return dev_get_drvdata(&intf->dev);
-}
-
-static inline void usb_set_intfdata(struct usb_interface *intf, void *data)
-{
-	dev_set_drvdata(&intf->dev, data);
-}
-
-struct usb_interface *usb_get_intf(struct usb_interface *intf);
-void usb_put_intf(struct usb_interface *intf);
-
-/* this maximum is arbitrary */
-#define USB_MAXINTERFACES	32
-#define USB_MAXIADS		(USB_MAXINTERFACES/2)
-
-/**
- * struct usb_interface_cache - long-term representation of a device interface
- * @num_altsetting: number of altsettings defined.
- * @ref: reference counter.
- * @altsetting: variable-length array of interface structures, one for
- *	each alternate setting that may be selected.  Each one includes a
- *	set of endpoint configurations.  They will be in no particular order.
- *
- * These structures persist for the lifetime of a usb_device, unlike
- * struct usb_interface (which persists only as long as its configuration
- * is installed).  The altsetting arrays can be accessed through these
- * structures at any time, permitting comparison of configurations and
- * providing support for the /proc/bus/usb/devices pseudo-file.
- */
-struct usb_interface_cache {
-	unsigned num_altsetting;	/* number of alternate settings */
-	struct kref ref;		/* reference counter */
-
-	/* variable-length array of alternate settings for this interface,
-	 * stored in no particular order */
-	struct usb_host_interface altsetting[0];
-};
-#define	ref_to_usb_interface_cache(r) \
-		container_of(r, struct usb_interface_cache, ref)
-#define	altsetting_to_usb_interface_cache(a) \
-		container_of(a, struct usb_interface_cache, altsetting[0])
-
-/**
- * struct usb_host_config - representation of a device's configuration
- * @desc: the device's configuration descriptor.
- * @string: pointer to the cached version of the iConfiguration string, if
- *	present for this configuration.
- * @intf_assoc: list of any interface association descriptors in this config
- * @interface: array of pointers to usb_interface structures, one for each
- *	interface in the configuration.  The number of interfaces is stored
- *	in desc.bNumInterfaces.  These pointers are valid only while the
- *	the configuration is active.
- * @intf_cache: array of pointers to usb_interface_cache structures, one
- *	for each interface in the configuration.  These structures exist
- *	for the entire life of the device.
- * @extra: pointer to buffer containing all extra descriptors associated
- *	with this configuration (those preceding the first interface
- *	descriptor).
- * @extralen: length of the extra descriptors buffer.
- *
- * USB devices may have multiple configurations, but only one can be active
- * at any time.  Each encapsulates a different operational environment;
- * for example, a dual-speed device would have separate configurations for
- * full-speed and high-speed operation.  The number of configurations
- * available is stored in the device descriptor as bNumConfigurations.
- *
- * A configuration can contain multiple interfaces.  Each corresponds to
- * a different function of the USB device, and all are available whenever
- * the configuration is active.  The USB standard says that interfaces
- * are supposed to be numbered from 0 to desc.bNumInterfaces-1, but a lot
- * of devices get this wrong.  In addition, the interface array is not
- * guaranteed to be sorted in numerical order.  Use usb_ifnum_to_if() to
- * look up an interface entry based on its number.
- *
- * Device drivers should not attempt to activate configurations.  The choice
- * of which configuration to install is a policy decision based on such
- * considerations as available power, functionality provided, and the user's
- * desires (expressed through userspace tools).  However, drivers can call
- * usb_reset_configuration() to reinitialize the current configuration and
- * all its interfaces.
- */
-struct usb_host_config {
-	struct usb_config_descriptor	desc;
-
-	char *string;		/* iConfiguration string, if present */
-
-	/* List of any Interface Association Descriptors in this
-	 * configuration. */
-	struct usb_interface_assoc_descriptor *intf_assoc[USB_MAXIADS];
-
-	/* the interfaces associated with this configuration,
-	 * stored in no particular order */
-	struct usb_interface *interface[USB_MAXINTERFACES];
-
-	/* Interface information available even when this is not the
-	 * active configuration */
-	struct usb_interface_cache *intf_cache[USB_MAXINTERFACES];
-
-	unsigned char *extra;   /* Extra descriptors */
-	int extralen;
-};
-
-/* USB2.0 and USB3.0 device BOS descriptor set */
-struct usb_host_bos {
-	struct usb_bos_descriptor	*desc;
-
-	/* wireless cap descriptor is handled by wusb */
-	struct usb_ext_cap_descriptor	*ext_cap;
-	struct usb_ss_cap_descriptor	*ss_cap;
-	struct usb_ss_container_id_descriptor	*ss_id;
-};
-
-int __usb_get_extra_descriptor(char *buffer, unsigned size,
-	unsigned char type, void **ptr);
-#define usb_get_extra_descriptor(ifpoint, type, ptr) \
-				__usb_get_extra_descriptor((ifpoint)->extra, \
-				(ifpoint)->extralen, \
-				type, (void **)ptr)
-
-/* ----------------------------------------------------------------------- */
-
-/* USB device number allocation bitmap */
-struct usb_devmap {
-	unsigned long devicemap[128 / (8*sizeof(unsigned long))];
-};
-
-/*
- * Allocated per bus (tree of devices) we have:
- */
-struct usb_bus {
-	struct device *controller;	/* host/master side hardware */
-	int busnum;			/* Bus number (in order of reg) */
-	const char *bus_name;		/* stable id (PCI slot_name etc) */
-	u8 uses_dma;			/* Does the host controller use DMA? */
-	u8 uses_pio_for_control;	/*
-					 * Does the host controller use PIO
-					 * for control transfers?
-					 */
-	u8 otg_port;			/* 0, or number of OTG/HNP port */
-	unsigned is_b_host:1;		/* true during some HNP roleswitches */
-	unsigned b_hnp_enable:1;	/* OTG: did A-Host enable HNP? */
-	unsigned sg_tablesize;		/* 0 or largest number of sg list entries */
-
-	int devnum_next;		/* Next open device number in
-					 * round-robin allocation */
-
-	struct usb_devmap devmap;	/* device address allocation map */
-	struct usb_device *root_hub;	/* Root hub */
-	struct usb_bus *hs_companion;	/* Companion EHCI bus, if any */
-	struct list_head bus_list;	/* list of busses */
-
-	int bandwidth_allocated;	/* on this bus: how much of the time
-					 * reserved for periodic (intr/iso)
-					 * requests is used, on average?
-					 * Units: microseconds/frame.
-					 * Limits: Full/low speed reserve 90%,
-					 * while high speed reserves 80%.
-					 */
-	int bandwidth_int_reqs;		/* number of Interrupt requests */
-	int bandwidth_isoc_reqs;	/* number of Isoc. requests */
-
-#ifdef CONFIG_USB_DEVICEFS
-	struct dentry *usbfs_dentry;	/* usbfs dentry entry for the bus */
-#endif
-
-#if defined(CONFIG_USB_MON) || defined(CONFIG_USB_MON_MODULE)
-	struct mon_bus *mon_bus;	/* non-null when associated */
-	int monitored;			/* non-zero when monitored */
-#endif
-};
-
-/* ----------------------------------------------------------------------- */
-
-/* This is arbitrary.
- * From USB 2.0 spec Table 11-13, offset 7, a hub can
- * have up to 255 ports. The most yet reported is 10.
- *
- * Current Wireless USB host hardware (Intel i1480 for example) allows
- * up to 22 devices to connect. Upcoming hardware might raise that
- * limit. Because the arrays need to add a bit for hub status data, we
- * do 31, so plus one evens out to four bytes.
- */
-#define USB_MAXCHILDREN		(31)
-
-struct usb_tt;
-
-enum usb_device_removable {
-	USB_DEVICE_REMOVABLE_UNKNOWN = 0,
-	USB_DEVICE_REMOVABLE,
-	USB_DEVICE_FIXED,
-};
-
-/**
- * struct usb_device - kernel's representation of a USB device
- * @devnum: device number; address on a USB bus
- * @devpath: device ID string for use in messages (e.g., /port/...)
- * @route: tree topology hex string for use with xHCI
- * @state: device state: configured, not attached, etc.
- * @speed: device speed: high/full/low (or error)
- * @tt: Transaction Translator info; used with low/full speed dev, highspeed hub
- * @ttport: device port on that tt hub
- * @toggle: one bit for each endpoint, with ([0] = IN, [1] = OUT) endpoints
- * @parent: our hub, unless we're the root
- * @bus: bus we're part of
- * @ep0: endpoint 0 data (default control pipe)
- * @dev: generic device interface
- * @descriptor: USB device descriptor
- * @bos: USB device BOS descriptor set
- * @config: all of the device's configs
- * @actconfig: the active configuration
- * @ep_in: array of IN endpoints
- * @ep_out: array of OUT endpoints
- * @rawdescriptors: raw descriptors for each config
- * @bus_mA: Current available from the bus
- * @portnum: parent port number (origin 1)
- * @level: number of USB hub ancestors
- * @can_submit: URBs may be submitted
- * @persist_enabled:  USB_PERSIST enabled for this device
- * @have_langid: whether string_langid is valid
- * @authorized: policy has said we can use it;
- *	(user space) policy determines if we authorize this device to be
- *	used or not. By default, wired USB devices are authorized.
- *	WUSB devices are not, until we authorize them from user space.
- *	FIXME -- complete doc
- * @authenticated: Crypto authentication passed
- * @wusb: device is Wireless USB
- * @lpm_capable: device supports LPM
- * @usb2_hw_lpm_capable: device can perform USB2 hardware LPM
- * @usb2_hw_lpm_enabled: USB2 hardware LPM enabled
- * @string_langid: language ID for strings
- * @product: iProduct string, if present (static)
- * @manufacturer: iManufacturer string, if present (static)
- * @serial: iSerialNumber string, if present (static)
- * @filelist: usbfs files that are open to this device
- * @usb_classdev: USB class device that was created for usbfs device
- *	access from userspace
- * @usbfs_dentry: usbfs dentry entry for the device
- * @maxchild: number of ports if hub
- * @children: child devices - USB devices that are attached to this hub
- * @quirks: quirks of the whole device
- * @urbnum: number of URBs submitted for the whole device
- * @active_duration: total time device is not suspended
- * @connect_time: time device was first connected
- * @do_remote_wakeup:  remote wakeup should be enabled
- * @reset_resume: needs reset instead of resume
- * @wusb_dev: if this is a Wireless USB device, link to the WUSB
- *	specific data for the device.
- * @slot_id: Slot ID assigned by xHCI
- * @removable: Device can be physically removed from this port
- *
- * Notes:
- * Usbcore drivers should not set usbdev->state directly.  Instead use
- * usb_set_device_state().
- */
-struct usb_device {
-	int		devnum;
-	char		devpath[16];
-	u32		route;
-	enum usb_device_state	state;
-	enum usb_device_speed	speed;
-
-	struct usb_tt	*tt;
-	int		ttport;
-
-	unsigned int toggle[2];
-
-	struct usb_device *parent;
-	struct usb_bus *bus;
-	struct usb_host_endpoint ep0;
-
-	struct device dev;
-
-	struct usb_device_descriptor descriptor;
-	struct usb_host_bos *bos;
-	struct usb_host_config *config;
-
-	struct usb_host_config *actconfig;
-	struct usb_host_endpoint *ep_in[16];
-	struct usb_host_endpoint *ep_out[16];
-
-	char **rawdescriptors;
-
-	unsigned short bus_mA;
-	u8 portnum;
-	u8 level;
-
-	unsigned can_submit:1;
-	unsigned persist_enabled:1;
-	unsigned have_langid:1;
-	unsigned authorized:1;
-	unsigned authenticated:1;
-	unsigned wusb:1;
-	unsigned lpm_capable:1;
-	unsigned usb2_hw_lpm_capable:1;
-	unsigned usb2_hw_lpm_enabled:1;
-	int string_langid;
-
-	/* static strings from the device */
-	char *product;
-	char *manufacturer;
-	char *serial;
-
-	struct list_head filelist;
-#ifdef CONFIG_USB_DEVICE_CLASS
-	struct device *usb_classdev;
-#endif
-#ifdef CONFIG_USB_DEVICEFS
-	struct dentry *usbfs_dentry;
-#endif
-
-	int maxchild;
-	struct usb_device **children;
-
-	u32 quirks;
-	atomic_t urbnum;
-
-	unsigned long active_duration;
-
-#ifdef CONFIG_PM
-	unsigned long connect_time;
-
-	unsigned do_remote_wakeup:1;
-	unsigned reset_resume:1;
-#endif
-	struct wusb_dev *wusb_dev;
-	int slot_id;
-	enum usb_device_removable removable;
-};
-#define	to_usb_device(d) container_of(d, struct usb_device, dev)
-
-static inline struct usb_device *interface_to_usbdev(struct usb_interface *intf)
-{
-	return to_usb_device(intf->dev.parent);
-}
-
-extern struct usb_device *usb_get_dev(struct usb_device *dev);
-extern void usb_put_dev(struct usb_device *dev);
-
-/* USB device locking */
-#define usb_lock_device(udev)		device_lock(&(udev)->dev)
-#define usb_unlock_device(udev)		device_unlock(&(udev)->dev)
-#define usb_trylock_device(udev)	device_trylock(&(udev)->dev)
-extern int usb_lock_device_for_reset(struct usb_device *udev,
-				     const struct usb_interface *iface);
-
-/* USB port reset for device reinitialization */
-extern int usb_reset_device(struct usb_device *dev);
-extern void usb_queue_reset_device(struct usb_interface *dev);
-
-
-/* USB autosuspend and autoresume */
-#ifdef CONFIG_USB_SUSPEND
-extern void usb_enable_autosuspend(struct usb_device *udev);
-extern void usb_disable_autosuspend(struct usb_device *udev);
-
-extern int usb_autopm_get_interface(struct usb_interface *intf);
-extern void usb_autopm_put_interface(struct usb_interface *intf);
-extern int usb_autopm_get_interface_async(struct usb_interface *intf);
-extern void usb_autopm_put_interface_async(struct usb_interface *intf);
-extern void usb_autopm_get_interface_no_resume(struct usb_interface *intf);
-extern void usb_autopm_put_interface_no_suspend(struct usb_interface *intf);
-
-static inline void usb_mark_last_busy(struct usb_device *udev)
-{
-	pm_runtime_mark_last_busy(&udev->dev);
-}
-
-#else
-
-static inline int usb_enable_autosuspend(struct usb_device *udev)
-{ return 0; }
-static inline int usb_disable_autosuspend(struct usb_device *udev)
-{ return 0; }
-
-static inline int usb_autopm_get_interface(struct usb_interface *intf)
-{ return 0; }
-static inline int usb_autopm_get_interface_async(struct usb_interface *intf)
-{ return 0; }
-
-static inline void usb_autopm_put_interface(struct usb_interface *intf)
-{ }
-static inline void usb_autopm_put_interface_async(struct usb_interface *intf)
-{ }
-static inline void usb_autopm_get_interface_no_resume(
-		struct usb_interface *intf)
-{ }
-static inline void usb_autopm_put_interface_no_suspend(
-		struct usb_interface *intf)
-{ }
-static inline void usb_mark_last_busy(struct usb_device *udev)
-{ }
-#endif
-
-/*-------------------------------------------------------------------------*/
-
-/* for drivers using iso endpoints */
-extern int usb_get_current_frame_number(struct usb_device *usb_dev);
-
-/* Sets up a group of bulk endpoints to support multiple stream IDs. */
-extern int usb_alloc_streams(struct usb_interface *interface,
-		struct usb_host_endpoint **eps, unsigned int num_eps,
-		unsigned int num_streams, gfp_t mem_flags);
-
-/* Reverts a group of bulk endpoints back to not using stream IDs. */
-extern void usb_free_streams(struct usb_interface *interface,
-		struct usb_host_endpoint **eps, unsigned int num_eps,
-		gfp_t mem_flags);
-
-/* used these for multi-interface device registration */
-extern int usb_driver_claim_interface(struct usb_driver *driver,
-			struct usb_interface *iface, void *priv);
-
-/**
- * usb_interface_claimed - returns true iff an interface is claimed
- * @iface: the interface being checked
- *
- * Returns true (nonzero) iff the interface is claimed, else false (zero).
- * Callers must own the driver model's usb bus readlock.  So driver
- * probe() entries don't need extra locking, but other call contexts
- * may need to explicitly claim that lock.
- *
- */
-static inline int usb_interface_claimed(struct usb_interface *iface)
-{
-	return (iface->dev.driver != NULL);
-}
-
-extern void usb_driver_release_interface(struct usb_driver *driver,
-			struct usb_interface *iface);
-const struct usb_device_id *usb_match_id(struct usb_interface *interface,
-					 const struct usb_device_id *id);
-extern int usb_match_one_id(struct usb_interface *interface,
-			    const struct usb_device_id *id);
-
-extern struct usb_interface *usb_find_interface(struct usb_driver *drv,
-		int minor);
-extern struct usb_interface *usb_ifnum_to_if(const struct usb_device *dev,
-		unsigned ifnum);
-extern struct usb_host_interface *usb_altnum_to_altsetting(
-		const struct usb_interface *intf, unsigned int altnum);
-extern struct usb_host_interface *usb_find_alt_setting(
-		struct usb_host_config *config,
-		unsigned int iface_num,
-		unsigned int alt_num);
-
-
-/**
- * usb_make_path - returns stable device path in the usb tree
- * @dev: the device whose path is being constructed
- * @buf: where to put the string
- * @size: how big is "buf"?
- *
- * Returns length of the string (> 0) or negative if size was too small.
- *
- * This identifier is intended to be "stable", reflecting physical paths in
- * hardware such as physical bus addresses for host controllers or ports on
- * USB hubs.  That makes it stay the same until systems are physically
- * reconfigured, by re-cabling a tree of USB devices or by moving USB host
- * controllers.  Adding and removing devices, including virtual root hubs
- * in host controller driver modules, does not change these path identifiers;
- * neither does rebooting or re-enumerating.  These are more useful identifiers
- * than changeable ("unstable") ones like bus numbers or device addresses.
- *
- * With a partial exception for devices connected to USB 2.0 root hubs, these
- * identifiers are also predictable.  So long as the device tree isn't changed,
- * plugging any USB device into a given hub port always gives it the same path.
- * Because of the use of "companion" controllers, devices connected to ports on
- * USB 2.0 root hubs (EHCI host controllers) will get one path ID if they are
- * high speed, and a different one if they are full or low speed.
- */
-static inline int usb_make_path(struct usb_device *dev, char *buf, size_t size)
-{
-	int actual;
-	actual = snprintf(buf, size, "usb-%s-%s", dev->bus->bus_name,
-			  dev->devpath);
-	return (actual >= (int)size) ? -1 : actual;
-}
-
-/*-------------------------------------------------------------------------*/
-
-#define USB_DEVICE_ID_MATCH_DEVICE \
-		(USB_DEVICE_ID_MATCH_VENDOR | USB_DEVICE_ID_MATCH_PRODUCT)
-#define USB_DEVICE_ID_MATCH_DEV_RANGE \
-		(USB_DEVICE_ID_MATCH_DEV_LO | USB_DEVICE_ID_MATCH_DEV_HI)
-#define USB_DEVICE_ID_MATCH_DEVICE_AND_VERSION \
-		(USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_DEV_RANGE)
-#define USB_DEVICE_ID_MATCH_DEV_INFO \
-		(USB_DEVICE_ID_MATCH_DEV_CLASS | \
-		USB_DEVICE_ID_MATCH_DEV_SUBCLASS | \
-		USB_DEVICE_ID_MATCH_DEV_PROTOCOL)
-#define USB_DEVICE_ID_MATCH_INT_INFO \
-		(USB_DEVICE_ID_MATCH_INT_CLASS | \
-		USB_DEVICE_ID_MATCH_INT_SUBCLASS | \
-		USB_DEVICE_ID_MATCH_INT_PROTOCOL)
-
-/**
- * USB_DEVICE - macro used to describe a specific usb device
- * @vend: the 16 bit USB Vendor ID
- * @prod: the 16 bit USB Product ID
- *
- * This macro is used to create a struct usb_device_id that matches a
- * specific device.
- */
-#define USB_DEVICE(vend, prod) \
-	.match_flags = USB_DEVICE_ID_MATCH_DEVICE, \
-	.idVendor = (vend), \
-	.idProduct = (prod)
-/**
- * USB_DEVICE_VER - describe a specific usb device with a version range
- * @vend: the 16 bit USB Vendor ID
- * @prod: the 16 bit USB Product ID
- * @lo: the bcdDevice_lo value
- * @hi: the bcdDevice_hi value
- *
- * This macro is used to create a struct usb_device_id that matches a
- * specific device, with a version range.
- */
-#define USB_DEVICE_VER(vend, prod, lo, hi) \
-	.match_flags = USB_DEVICE_ID_MATCH_DEVICE_AND_VERSION, \
-	.idVendor = (vend), \
-	.idProduct = (prod), \
-	.bcdDevice_lo = (lo), \
-	.bcdDevice_hi = (hi)
-
-/**
- * USB_DEVICE_INTERFACE_PROTOCOL - describe a usb device with a specific interface protocol
- * @vend: the 16 bit USB Vendor ID
- * @prod: the 16 bit USB Product ID
- * @pr: bInterfaceProtocol value
- *
- * This macro is used to create a struct usb_device_id that matches a
- * specific interface protocol of devices.
- */
-#define USB_DEVICE_INTERFACE_PROTOCOL(vend, prod, pr) \
-	.match_flags = USB_DEVICE_ID_MATCH_DEVICE | \
-		       USB_DEVICE_ID_MATCH_INT_PROTOCOL, \
-	.idVendor = (vend), \
-	.idProduct = (prod), \
-	.bInterfaceProtocol = (pr)
-
-/**
- * USB_DEVICE_INFO - macro used to describe a class of usb devices
- * @cl: bDeviceClass value
- * @sc: bDeviceSubClass value
- * @pr: bDeviceProtocol value
- *
- * This macro is used to create a struct usb_device_id that matches a
- * specific class of devices.
- */
-#define USB_DEVICE_INFO(cl, sc, pr) \
-	.match_flags = USB_DEVICE_ID_MATCH_DEV_INFO, \
-	.bDeviceClass = (cl), \
-	.bDeviceSubClass = (sc), \
-	.bDeviceProtocol = (pr)
-
-/**
- * USB_INTERFACE_INFO - macro used to describe a class of usb interfaces
- * @cl: bInterfaceClass value
- * @sc: bInterfaceSubClass value
- * @pr: bInterfaceProtocol value
- *
- * This macro is used to create a struct usb_device_id that matches a
- * specific class of interfaces.
- */
-#define USB_INTERFACE_INFO(cl, sc, pr) \
-	.match_flags = USB_DEVICE_ID_MATCH_INT_INFO, \
-	.bInterfaceClass = (cl), \
-	.bInterfaceSubClass = (sc), \
-	.bInterfaceProtocol = (pr)
-
-/**
- * USB_DEVICE_AND_INTERFACE_INFO - describe a specific usb device with a class of usb interfaces
- * @vend: the 16 bit USB Vendor ID
- * @prod: the 16 bit USB Product ID
- * @cl: bInterfaceClass value
- * @sc: bInterfaceSubClass value
- * @pr: bInterfaceProtocol value
- *
- * This macro is used to create a struct usb_device_id that matches a
- * specific device with a specific class of interfaces.
- *
- * This is especially useful when explicitly matching devices that have
- * vendor specific bDeviceClass values, but standards-compliant interfaces.
- */
-#define USB_DEVICE_AND_INTERFACE_INFO(vend, prod, cl, sc, pr) \
-	.match_flags = USB_DEVICE_ID_MATCH_INT_INFO \
-		| USB_DEVICE_ID_MATCH_DEVICE, \
-	.idVendor = (vend), \
-	.idProduct = (prod), \
-	.bInterfaceClass = (cl), \
-	.bInterfaceSubClass = (sc), \
-	.bInterfaceProtocol = (pr)
-
-/* ----------------------------------------------------------------------- */
-
-/* Stuff for dynamic usb ids */
-struct usb_dynids {
-	spinlock_t lock;
-	struct list_head list;
-};
-
-struct usb_dynid {
-	struct list_head node;
-	struct usb_device_id id;
-};
-
-extern ssize_t usb_store_new_id(struct usb_dynids *dynids,
-				struct device_driver *driver,
-				const char *buf, size_t count);
-
-/**
- * struct usbdrv_wrap - wrapper for driver-model structure
- * @driver: The driver-model core driver structure.
- * @for_devices: Non-zero for device drivers, 0 for interface drivers.
- */
-struct usbdrv_wrap {
-	struct device_driver driver;
-	int for_devices;
-};
-
-/**
- * struct usb_driver - identifies USB interface driver to usbcore
- * @name: The driver name should be unique among USB drivers,
- *	and should normally be the same as the module name.
- * @probe: Called to see if the driver is willing to manage a particular
- *	interface on a device.  If it is, probe returns zero and uses
- *	usb_set_intfdata() to associate driver-specific data with the
- *	interface.  It may also use usb_set_interface() to specify the
- *	appropriate altsetting.  If unwilling to manage the interface,
- *	return -ENODEV, if genuine IO errors occurred, an appropriate
- *	negative errno value.
- * @disconnect: Called when the interface is no longer accessible, usually
- *	because its device has been (or is being) disconnected or the
- *	driver module is being unloaded.
- * @unlocked_ioctl: Used for drivers that want to talk to userspace through
- *	the "usbfs" filesystem.  This lets devices provide ways to
- *	expose information to user space regardless of where they
- *	do (or don't) show up otherwise in the filesystem.
- * @suspend: Called when the device is going to be suspended by the system.
- * @resume: Called when the device is being resumed by the system.
- * @reset_resume: Called when the suspended device has been reset instead
- *	of being resumed.
- * @pre_reset: Called by usb_reset_device() when the device is about to be
- *	reset.  This routine must not return until the driver has no active
- *	URBs for the device, and no more URBs may be submitted until the
- *	post_reset method is called.
- * @post_reset: Called by usb_reset_device() after the device
- *	has been reset
- * @id_table: USB drivers use ID table to support hotplugging.
- *	Export this with MODULE_DEVICE_TABLE(usb,...).  This must be set
- *	or your driver's probe function will never get called.
- * @dynids: used internally to hold the list of dynamically added device
- *	ids for this driver.
- * @drvwrap: Driver-model core structure wrapper.
- * @no_dynamic_id: if set to 1, the USB core will not allow dynamic ids to be
- *	added to this driver by preventing the sysfs file from being created.
- * @supports_autosuspend: if set to 0, the USB core will not allow autosuspend
- *	for interfaces bound to this driver.
- * @soft_unbind: if set to 1, the USB core will not kill URBs and disable
- *	endpoints before calling the driver's disconnect method.
- *
- * USB interface drivers must provide a name, probe() and disconnect()
- * methods, and an id_table.  Other driver fields are optional.
- *
- * The id_table is used in hotplugging.  It holds a set of descriptors,
- * and specialized data may be associated with each entry.  That table
- * is used by both user and kernel mode hotplugging support.
- *
- * The probe() and disconnect() methods are called in a context where
- * they can sleep, but they should avoid abusing the privilege.  Most
- * work to connect to a device should be done when the device is opened,
- * and undone at the last close.  The disconnect code needs to address
- * concurrency issues with respect to open() and close() methods, as
- * well as forcing all pending I/O requests to complete (by unlinking
- * them as necessary, and blocking until the unlinks complete).
- */
-struct usb_driver {
-	const char *name;
-
-	int (*probe) (struct usb_interface *intf,
-		      const struct usb_device_id *id);
-
-	void (*disconnect) (struct usb_interface *intf);
-
-	int (*unlocked_ioctl) (struct usb_interface *intf, unsigned int code,
-			void *buf);
-
-	int (*suspend) (struct usb_interface *intf, pm_message_t message);
-	int (*resume) (struct usb_interface *intf);
-	int (*reset_resume)(struct usb_interface *intf);
-
-	int (*pre_reset)(struct usb_interface *intf);
-	int (*post_reset)(struct usb_interface *intf);
-
-	const struct usb_device_id *id_table;
-
-	struct usb_dynids dynids;
-	struct usbdrv_wrap drvwrap;
-	unsigned int no_dynamic_id:1;
-	unsigned int supports_autosuspend:1;
-	unsigned int soft_unbind:1;
-};
-#define	to_usb_driver(d) container_of(d, struct usb_driver, drvwrap.driver)
-
-/**
- * struct usb_device_driver - identifies USB device driver to usbcore
- * @name: The driver name should be unique among USB drivers,
- *	and should normally be the same as the module name.
- * @probe: Called to see if the driver is willing to manage a particular
- *	device.  If it is, probe returns zero and uses dev_set_drvdata()
- *	to associate driver-specific data with the device.  If unwilling
- *	to manage the device, return a negative errno value.
- * @disconnect: Called when the device is no longer accessible, usually
- *	because it has been (or is being) disconnected or the driver's
- *	module is being unloaded.
- * @suspend: Called when the device is going to be suspended by the system.
- * @resume: Called when the device is being resumed by the system.
- * @drvwrap: Driver-model core structure wrapper.
- * @supports_autosuspend: if set to 0, the USB core will not allow autosuspend
- *	for devices bound to this driver.
- *
- * USB drivers must provide all the fields listed above except drvwrap.
- */
-struct usb_device_driver {
-	const char *name;
-
-	int (*probe) (struct usb_device *udev);
-	void (*disconnect) (struct usb_device *udev);
-
-	int (*suspend) (struct usb_device *udev, pm_message_t message);
-	int (*resume) (struct usb_device *udev, pm_message_t message);
-	struct usbdrv_wrap drvwrap;
-	unsigned int supports_autosuspend:1;
-};
-#define	to_usb_device_driver(d) container_of(d, struct usb_device_driver, \
-		drvwrap.driver)
-
-extern struct bus_type usb_bus_type;
-
-/**
- * struct usb_class_driver - identifies a USB driver that wants to use the USB major number
- * @name: the usb class device name for this driver.  Will show up in sysfs.
- * @devnode: Callback to provide a naming hint for a possible
- *	device node to create.
- * @fops: pointer to the struct file_operations of this driver.
- * @minor_base: the start of the minor range for this driver.
- *
- * This structure is used for the usb_register_dev() and
- * usb_unregister_dev() functions, to consolidate a number of the
- * parameters used for them.
- */
-struct usb_class_driver {
-	char *name;
-	char *(*devnode)(struct device *dev, umode_t *mode);
-	const struct file_operations *fops;
-	int minor_base;
-};
-
-/*
- * use these in module_init()/module_exit()
- * and don't forget MODULE_DEVICE_TABLE(usb, ...)
- */
-extern int usb_register_driver(struct usb_driver *, struct module *,
-			       const char *);
-
-/* use a define to avoid include chaining to get THIS_MODULE & friends */
-#define usb_register(driver) \
-	usb_register_driver(driver, THIS_MODULE, KBUILD_MODNAME)
-
-extern void usb_deregister(struct usb_driver *);
-
-/**
- * module_usb_driver() - Helper macro for registering a USB driver
- * @__usb_driver: usb_driver struct
- *
- * Helper macro for USB drivers which do not do anything special in module
- * init/exit. This eliminates a lot of boilerplate. Each module may only
- * use this macro once, and calling it replaces module_init() and module_exit()
- */
-#define module_usb_driver(__usb_driver) \
-	module_driver(__usb_driver, usb_register, \
-		       usb_deregister)
-
-extern int usb_register_device_driver(struct usb_device_driver *,
-			struct module *);
-extern void usb_deregister_device_driver(struct usb_device_driver *);
-
-extern int usb_register_dev(struct usb_interface *intf,
-			    struct usb_class_driver *class_driver);
-extern void usb_deregister_dev(struct usb_interface *intf,
-			       struct usb_class_driver *class_driver);
-
-extern int usb_disabled(void);
-
-/* ----------------------------------------------------------------------- */
-
-/*
- * URB support, for asynchronous request completions
- */
-
-/*
- * urb->transfer_flags:
- *
- * Note: URB_DIR_IN/OUT is automatically set in usb_submit_urb().
- */
-#define URB_SHORT_NOT_OK	0x0001	/* report short reads as errors */
-#define URB_ISO_ASAP		0x0002	/* iso-only, urb->start_frame
-					 * ignored */
-#define URB_NO_TRANSFER_DMA_MAP	0x0004	/* urb->transfer_dma valid on submit */
-#define URB_NO_FSBR		0x0020	/* UHCI-specific */
-#define URB_ZERO_PACKET		0x0040	/* Finish bulk OUT with short packet */
-#define URB_NO_INTERRUPT	0x0080	/* HINT: no non-error interrupt
-					 * needed */
-#define URB_FREE_BUFFER		0x0100	/* Free transfer buffer with the URB */
-
-/* The following flags are used internally by usbcore and HCDs */
-#define URB_DIR_IN		0x0200	/* Transfer from device to host */
-#define URB_DIR_OUT		0
-#define URB_DIR_MASK		URB_DIR_IN
-
-#define URB_DMA_MAP_SINGLE	0x00010000	/* Non-scatter-gather mapping */
-#define URB_DMA_MAP_PAGE	0x00020000	/* HCD-unsupported S-G */
-#define URB_DMA_MAP_SG		0x00040000	/* HCD-supported S-G */
-#define URB_MAP_LOCAL		0x00080000	/* HCD-local-memory mapping */
-#define URB_SETUP_MAP_SINGLE	0x00100000	/* Setup packet DMA mapped */
-#define URB_SETUP_MAP_LOCAL	0x00200000	/* HCD-local setup packet */
-#define URB_DMA_SG_COMBINED	0x00400000	/* S-G entries were combined */
-#define URB_ALIGNED_TEMP_BUFFER	0x00800000	/* Temp buffer was alloc'd */
-/*{CharlesTu, 2010.08.26,  for test mode */
-#define URB_HCD_DRIVER_TEST     0xFFFF  /* Do NOT hand back or free this URB */
-/*CharlesTu}*/
-
-struct usb_iso_packet_descriptor {
-	unsigned int offset;
-	unsigned int length;		/* expected length */
-	unsigned int actual_length;
-	int status;
-};
-
-struct urb;
-
-struct usb_anchor {
-	struct list_head urb_list;
-	wait_queue_head_t wait;
-	spinlock_t lock;
-	unsigned int poisoned:1;
-};
-
-static inline void init_usb_anchor(struct usb_anchor *anchor)
-{
-	INIT_LIST_HEAD(&anchor->urb_list);
-	init_waitqueue_head(&anchor->wait);
-	spin_lock_init(&anchor->lock);
-}
-
-typedef void (*usb_complete_t)(struct urb *);
-
-/**
- * struct urb - USB Request Block
- * @urb_list: For use by current owner of the URB.
- * @anchor_list: membership in the list of an anchor
- * @anchor: to anchor URBs to a common mooring
- * @ep: Points to the endpoint's data structure.  Will eventually
- *	replace @pipe.
- * @pipe: Holds endpoint number, direction, type, and more.
- *	Create these values with the eight macros available;
- *	usb_{snd,rcv}TYPEpipe(dev,endpoint), where the TYPE is "ctrl"
- *	(control), "bulk", "int" (interrupt), or "iso" (isochronous).
- *	For example usb_sndbulkpipe() or usb_rcvintpipe().  Endpoint
- *	numbers range from zero to fifteen.  Note that "in" endpoint two
- *	is a different endpoint (and pipe) from "out" endpoint two.
- *	The current configuration controls the existence, type, and
- *	maximum packet size of any given endpoint.
- * @stream_id: the endpoint's stream ID for bulk streams
- * @dev: Identifies the USB device to perform the request.
- * @status: This is read in non-iso completion functions to get the
- *	status of the particular request.  ISO requests only use it
- *	to tell whether the URB was unlinked; detailed status for
- *	each frame is in the fields of the iso_frame-desc.
- * @transfer_flags: A variety of flags may be used to affect how URB
- *	submission, unlinking, or operation are handled.  Different
- *	kinds of URB can use different flags.
- * @transfer_buffer:  This identifies the buffer to (or from) which the I/O
- *	request will be performed unless URB_NO_TRANSFER_DMA_MAP is set
- *	(however, do not leave garbage in transfer_buffer even then).
- *	This buffer must be suitable for DMA; allocate it with
- *	kmalloc() or equivalent.  For transfers to "in" endpoints, contents
- *	of this buffer will be modified.  This buffer is used for the data
- *	stage of control transfers.
- * @transfer_dma: When transfer_flags includes URB_NO_TRANSFER_DMA_MAP,
- *	the device driver is saying that it provided this DMA address,
- *	which the host controller driver should use in preference to the
- *	transfer_buffer.
- * @sg: scatter gather buffer list
- * @num_mapped_sgs: (internal) number of mapped sg entries
- * @num_sgs: number of entries in the sg list
- * @transfer_buffer_length: How big is transfer_buffer.  The transfer may
- *	be broken up into chunks according to the current maximum packet
- *	size for the endpoint, which is a function of the configuration
- *	and is encoded in the pipe.  When the length is zero, neither
- *	transfer_buffer nor transfer_dma is used.
- * @actual_length: This is read in non-iso completion functions, and
- *	it tells how many bytes (out of transfer_buffer_length) were
- *	transferred.  It will normally be the same as requested, unless
- *	either an error was reported or a short read was performed.
- *	The URB_SHORT_NOT_OK transfer flag may be used to make such
- *	short reads be reported as errors.
- * @setup_packet: Only used for control transfers, this points to eight bytes
- *	of setup data.  Control transfers always start by sending this data
- *	to the device.  Then transfer_buffer is read or written, if needed.
- * @setup_dma: DMA pointer for the setup packet.  The caller must not use
- *	this field; setup_packet must point to a valid buffer.
- * @start_frame: Returns the initial frame for isochronous transfers.
- * @number_of_packets: Lists the number of ISO transfer buffers.
- * @interval: Specifies the polling interval for interrupt or isochronous
- *	transfers.  The units are frames (milliseconds) for full and low
- *	speed devices, and microframes (1/8 millisecond) for highspeed
- *	and SuperSpeed devices.
- * @error_count: Returns the number of ISO transfers that reported errors.
- * @context: For use in completion functions.  This normally points to
- *	request-specific driver context.
- * @complete: Completion handler. This URB is passed as the parameter to the
- *	completion function.  The completion function may then do what
- *	it likes with the URB, including resubmitting or freeing it.
- * @iso_frame_desc: Used to provide arrays of ISO transfer buffers and to
- *	collect the transfer status for each buffer.
- *
- * This structure identifies USB transfer requests.  URBs must be allocated by
- * calling usb_alloc_urb() and freed with a call to usb_free_urb().
- * Initialization may be done using various usb_fill_*_urb() functions.  URBs
- * are submitted using usb_submit_urb(), and pending requests may be canceled
- * using usb_unlink_urb() or usb_kill_urb().
- *
- * Data Transfer Buffers:
- *
- * Normally drivers provide I/O buffers allocated with kmalloc() or otherwise
- * taken from the general page pool.  That is provided by transfer_buffer
- * (control requests also use setup_packet), and host controller drivers
- * perform a dma mapping (and unmapping) for each buffer transferred.  Those
- * mapping operations can be expensive on some platforms (perhaps using a dma
- * bounce buffer or talking to an IOMMU),
- * although they're cheap on commodity x86 and ppc hardware.
- *
- * Alternatively, drivers may pass the URB_NO_TRANSFER_DMA_MAP transfer flag,
- * which tells the host controller driver that no such mapping is needed for
- * the transfer_buffer since
- * the device driver is DMA-aware.  For example, a device driver might
- * allocate a DMA buffer with usb_alloc_coherent() or call usb_buffer_map().
- * When this transfer flag is provided, host controller drivers will
- * attempt to use the dma address found in the transfer_dma
- * field rather than determining a dma address themselves.
- *
- * Note that transfer_buffer must still be set if the controller
- * does not support DMA (as indicated by bus.uses_dma) and when talking
- * to root hub. If you have to trasfer between highmem zone and the device
- * on such controller, create a bounce buffer or bail out with an error.
- * If transfer_buffer cannot be set (is in highmem) and the controller is DMA
- * capable, assign NULL to it, so that usbmon knows not to use the value.
- * The setup_packet must always be set, so it cannot be located in highmem.
- *
- * Initialization:
- *
- * All URBs submitted must initialize the dev, pipe, transfer_flags (may be
- * zero), and complete fields.  All URBs must also initialize
- * transfer_buffer and transfer_buffer_length.  They may provide the
- * URB_SHORT_NOT_OK transfer flag, indicating that short reads are
- * to be treated as errors; that flag is invalid for write requests.
- *
- * Bulk URBs may
- * use the URB_ZERO_PACKET transfer flag, indicating that bulk OUT transfers
- * should always terminate with a short packet, even if it means adding an
- * extra zero length packet.
- *
- * Control URBs must provide a valid pointer in the setup_packet field.
- * Unlike the transfer_buffer, the setup_packet may not be mapped for DMA
- * beforehand.
- *
- * Interrupt URBs must provide an interval, saying how often (in milliseconds
- * or, for highspeed devices, 125 microsecond units)
- * to poll for transfers.  After the URB has been submitted, the interval
- * field reflects how the transfer was actually scheduled.
- * The polling interval may be more frequent than requested.
- * For example, some controllers have a maximum interval of 32 milliseconds,
- * while others support intervals of up to 1024 milliseconds.
- * Isochronous URBs also have transfer intervals.  (Note that for isochronous
- * endpoints, as well as high speed interrupt endpoints, the encoding of
- * the transfer interval in the endpoint descriptor is logarithmic.
- * Device drivers must convert that value to linear units themselves.)
- *
- * Isochronous URBs normally use the URB_ISO_ASAP transfer flag, telling
- * the host controller to schedule the transfer as soon as bandwidth
- * utilization allows, and then set start_frame to reflect the actual frame
- * selected during submission.  Otherwise drivers must specify the start_frame
- * and handle the case where the transfer can't begin then.  However, drivers
- * won't know how bandwidth is currently allocated, and while they can
- * find the current frame using usb_get_current_frame_number () they can't
- * know the range for that frame number.  (Ranges for frame counter values
- * are HC-specific, and can go from 256 to 65536 frames from "now".)
- *
- * Isochronous URBs have a different data transfer model, in part because
- * the quality of service is only "best effort".  Callers provide specially
- * allocated URBs, with number_of_packets worth of iso_frame_desc structures
- * at the end.  Each such packet is an individual ISO transfer.  Isochronous
- * URBs are normally queued, submitted by drivers to arrange that
- * transfers are at least double buffered, and then explicitly resubmitted
- * in completion handlers, so
- * that data (such as audio or video) streams at as constant a rate as the
- * host controller scheduler can support.
- *
- * Completion Callbacks:
- *
- * The completion callback is made in_interrupt(), and one of the first
- * things that a completion handler should do is check the status field.
- * The status field is provided for all URBs.  It is used to report
- * unlinked URBs, and status for all non-ISO transfers.  It should not
- * be examined before the URB is returned to the completion handler.
- *
- * The context field is normally used to link URBs back to the relevant
- * driver or request state.
- *
- * When the completion callback is invoked for non-isochronous URBs, the
- * actual_length field tells how many bytes were transferred.  This field
- * is updated even when the URB terminated with an error or was unlinked.
- *
- * ISO transfer status is reported in the status and actual_length fields
- * of the iso_frame_desc array, and the number of errors is reported in
- * error_count.  Completion callbacks for ISO transfers will normally
- * (re)submit URBs to ensure a constant transfer rate.
- *
- * Note that even fields marked "public" should not be touched by the driver
- * when the urb is owned by the hcd, that is, since the call to
- * usb_submit_urb() till the entry into the completion routine.
- */
-struct urb {
-	/* private: usb core and host controller only fields in the urb */
-	struct kref kref;		/* reference count of the URB */
-	void *hcpriv;			/* private data for host controller */
-	atomic_t use_count;		/* concurrent submissions counter */
-	atomic_t reject;		/* submissions will fail */
-	int unlinked;			/* unlink error code */
-
-	/* public: documented fields in the urb that can be used by drivers */
-	struct list_head urb_list;	/* list head for use by the urb's
-					 * current owner */
-	struct list_head anchor_list;	/* the URB may be anchored */
-	struct usb_anchor *anchor;
-	struct usb_device *dev;		/* (in) pointer to associated device */
-	struct usb_host_endpoint *ep;	/* (internal) pointer to endpoint */
-	unsigned int pipe;		/* (in) pipe information */
-	unsigned int stream_id;		/* (in) stream ID */
-	int status;			/* (return) non-ISO status */
-	unsigned int transfer_flags;	/* (in) URB_SHORT_NOT_OK | ...*/
-	void *transfer_buffer;		/* (in) associated data buffer */
-	dma_addr_t transfer_dma;	/* (in) dma addr for transfer_buffer */
-	struct scatterlist *sg;		/* (in) scatter gather buffer list */
-	int num_mapped_sgs;		/* (internal) mapped sg entries */
-	int num_sgs;			/* (in) number of entries in the sg list */
-	u32 transfer_buffer_length;	/* (in) data buffer length */
-	u32 actual_length;		/* (return) actual transfer length */
-	unsigned char *setup_packet;	/* (in) setup packet (control only) */
-	dma_addr_t setup_dma;		/* (in) dma addr for setup_packet */
-	int start_frame;		/* (modify) start frame (ISO) */
-	int number_of_packets;		/* (in) number of ISO packets */
-	int interval;			/* (modify) transfer interval
-					 * (INT/ISO) */
-	int error_count;		/* (return) number of ISO errors */
-	void *context;			/* (in) context for completion */
-	usb_complete_t complete;	/* (in) completion routine */
-	struct usb_iso_packet_descriptor iso_frame_desc[0];
-					/* (in) ISO ONLY */
-};
-
-/* ----------------------------------------------------------------------- */
-
-/**
- * usb_fill_control_urb - initializes a control urb
- * @urb: pointer to the urb to initialize.
- * @dev: pointer to the struct usb_device for this urb.
- * @pipe: the endpoint pipe
- * @setup_packet: pointer to the setup_packet buffer
- * @transfer_buffer: pointer to the transfer buffer
- * @buffer_length: length of the transfer buffer
- * @complete_fn: pointer to the usb_complete_t function
- * @context: what to set the urb context to.
- *
- * Initializes a control urb with the proper information needed to submit
- * it to a device.
- */
-static inline void usb_fill_control_urb(struct urb *urb,
-					struct usb_device *dev,
-					unsigned int pipe,
-					unsigned char *setup_packet,
-					void *transfer_buffer,
-					int buffer_length,
-					usb_complete_t complete_fn,
-					void *context)
-{
-	urb->dev = dev;
-	urb->pipe = pipe;
-	urb->setup_packet = setup_packet;
-	urb->transfer_buffer = transfer_buffer;
-	urb->transfer_buffer_length = buffer_length;
-	urb->complete = complete_fn;
-	urb->context = context;
-}
-
-/**
- * usb_fill_bulk_urb - macro to help initialize a bulk urb
- * @urb: pointer to the urb to initialize.
- * @dev: pointer to the struct usb_device for this urb.
- * @pipe: the endpoint pipe
- * @transfer_buffer: pointer to the transfer buffer
- * @buffer_length: length of the transfer buffer
- * @complete_fn: pointer to the usb_complete_t function
- * @context: what to set the urb context to.
- *
- * Initializes a bulk urb with the proper information needed to submit it
- * to a device.
- */
-static inline void usb_fill_bulk_urb(struct urb *urb,
-				     struct usb_device *dev,
-				     unsigned int pipe,
-				     void *transfer_buffer,
-				     int buffer_length,
-				     usb_complete_t complete_fn,
-				     void *context)
-{
-	urb->dev = dev;
-	urb->pipe = pipe;
-	urb->transfer_buffer = transfer_buffer;
-	urb->transfer_buffer_length = buffer_length;
-	urb->complete = complete_fn;
-	urb->context = context;
-}
-
-/**
- * usb_fill_int_urb - macro to help initialize a interrupt urb
- * @urb: pointer to the urb to initialize.
- * @dev: pointer to the struct usb_device for this urb.
- * @pipe: the endpoint pipe
- * @transfer_buffer: pointer to the transfer buffer
- * @buffer_length: length of the transfer buffer
- * @complete_fn: pointer to the usb_complete_t function
- * @context: what to set the urb context to.
- * @interval: what to set the urb interval to, encoded like
- *	the endpoint descriptor's bInterval value.
- *
- * Initializes a interrupt urb with the proper information needed to submit
- * it to a device.
- *
- * Note that High Speed and SuperSpeed interrupt endpoints use a logarithmic
- * encoding of the endpoint interval, and express polling intervals in
- * microframes (eight per millisecond) rather than in frames (one per
- * millisecond).
- *
- * Wireless USB also uses the logarithmic encoding, but specifies it in units of
- * 128us instead of 125us.  For Wireless USB devices, the interval is passed
- * through to the host controller, rather than being translated into microframe
- * units.
- */
-static inline void usb_fill_int_urb(struct urb *urb,
-				    struct usb_device *dev,
-				    unsigned int pipe,
-				    void *transfer_buffer,
-				    int buffer_length,
-				    usb_complete_t complete_fn,
-				    void *context,
-				    int interval)
-{
-	urb->dev = dev;
-	urb->pipe = pipe;
-	urb->transfer_buffer = transfer_buffer;
-	urb->transfer_buffer_length = buffer_length;
-	urb->complete = complete_fn;
-	urb->context = context;
-	if (dev->speed == USB_SPEED_HIGH || dev->speed == USB_SPEED_SUPER)
-		urb->interval = 1 << (interval - 1);
-	else
-		urb->interval = interval;
-	urb->start_frame = -1;
-}
-
-extern void usb_init_urb(struct urb *urb);
-extern struct urb *usb_alloc_urb(int iso_packets, gfp_t mem_flags);
-extern void usb_free_urb(struct urb *urb);
-#define usb_put_urb usb_free_urb
-extern struct urb *usb_get_urb(struct urb *urb);
-extern int usb_submit_urb(struct urb *urb, gfp_t mem_flags);
-extern int usb_unlink_urb(struct urb *urb);
-extern void usb_kill_urb(struct urb *urb);
-extern void usb_poison_urb(struct urb *urb);
-extern void usb_unpoison_urb(struct urb *urb);
-extern void usb_block_urb(struct urb *urb);
-extern void usb_kill_anchored_urbs(struct usb_anchor *anchor);
-extern void usb_poison_anchored_urbs(struct usb_anchor *anchor);
-extern void usb_unpoison_anchored_urbs(struct usb_anchor *anchor);
-extern void usb_unlink_anchored_urbs(struct usb_anchor *anchor);
-extern void usb_anchor_urb(struct urb *urb, struct usb_anchor *anchor);
-extern void usb_unanchor_urb(struct urb *urb);
-extern int usb_wait_anchor_empty_timeout(struct usb_anchor *anchor,
-					 unsigned int timeout);
-extern struct urb *usb_get_from_anchor(struct usb_anchor *anchor);
-extern void usb_scuttle_anchored_urbs(struct usb_anchor *anchor);
-extern int usb_anchor_empty(struct usb_anchor *anchor);
-
-#define usb_unblock_urb	usb_unpoison_urb
-
-/**
- * usb_urb_dir_in - check if an URB describes an IN transfer
- * @urb: URB to be checked
- *
- * Returns 1 if @urb describes an IN transfer (device-to-host),
- * otherwise 0.
- */
-static inline int usb_urb_dir_in(struct urb *urb)
-{
-	return (urb->transfer_flags & URB_DIR_MASK) == URB_DIR_IN;
-}
-
-/**
- * usb_urb_dir_out - check if an URB describes an OUT transfer
- * @urb: URB to be checked
- *
- * Returns 1 if @urb describes an OUT transfer (host-to-device),
- * otherwise 0.
- */
-static inline int usb_urb_dir_out(struct urb *urb)
-{
-	return (urb->transfer_flags & URB_DIR_MASK) == URB_DIR_OUT;
-}
-
-void *usb_alloc_coherent(struct usb_device *dev, size_t size,
-	gfp_t mem_flags, dma_addr_t *dma);
-void usb_free_coherent(struct usb_device *dev, size_t size,
-	void *addr, dma_addr_t dma);
-
-#if 0
-struct urb *usb_buffer_map(struct urb *urb);
-void usb_buffer_dmasync(struct urb *urb);
-void usb_buffer_unmap(struct urb *urb);
-#endif
-
-struct scatterlist;
-int usb_buffer_map_sg(const struct usb_device *dev, int is_in,
-		      struct scatterlist *sg, int nents);
-#if 0
-void usb_buffer_dmasync_sg(const struct usb_device *dev, int is_in,
-			   struct scatterlist *sg, int n_hw_ents);
-#endif
-void usb_buffer_unmap_sg(const struct usb_device *dev, int is_in,
-			 struct scatterlist *sg, int n_hw_ents);
-
-/*-------------------------------------------------------------------*
- *                         SYNCHRONOUS CALL SUPPORT                  *
- *-------------------------------------------------------------------*/
-
-extern int usb_control_msg(struct usb_device *dev, unsigned int pipe,
-	__u8 request, __u8 requesttype, __u16 value, __u16 index,
-	void *data, __u16 size, int timeout);
-extern int usb_interrupt_msg(struct usb_device *usb_dev, unsigned int pipe,
-	void *data, int len, int *actual_length, int timeout);
-extern int usb_bulk_msg(struct usb_device *usb_dev, unsigned int pipe,
-	void *data, int len, int *actual_length,
-	int timeout);
-
-/* wrappers around usb_control_msg() for the most common standard requests */
-extern int usb_get_descriptor(struct usb_device *dev, unsigned char desctype,
-	unsigned char descindex, void *buf, int size);
-extern int usb_get_status(struct usb_device *dev,
-	int type, int target, void *data);
-extern int usb_string(struct usb_device *dev, int index,
-	char *buf, size_t size);
-
-/* wrappers that also update important state inside usbcore */
-extern int usb_clear_halt(struct usb_device *dev, int pipe);
-extern int usb_reset_configuration(struct usb_device *dev);
-extern int usb_set_interface(struct usb_device *dev, int ifnum, int alternate);
-extern void usb_reset_endpoint(struct usb_device *dev, unsigned int epaddr);
-
-/* this request isn't really synchronous, but it belongs with the others */
-extern int usb_driver_set_configuration(struct usb_device *udev, int config);
-
-/*
- * timeouts, in milliseconds, used for sending/receiving control messages
- * they typically complete within a few frames (msec) after they're issued
- * USB identifies 5 second timeouts, maybe more in a few cases, and a few
- * slow devices (like some MGE Ellipse UPSes) actually push that limit.
- */
-#define USB_CTRL_GET_TIMEOUT	5000
-#define USB_CTRL_SET_TIMEOUT	5000
-
-
-/**
- * struct usb_sg_request - support for scatter/gather I/O
- * @status: zero indicates success, else negative errno
- * @bytes: counts bytes transferred.
- *
- * These requests are initialized using usb_sg_init(), and then are used
- * as request handles passed to usb_sg_wait() or usb_sg_cancel().  Most
- * members of the request object aren't for driver access.
- *
- * The status and bytecount values are valid only after usb_sg_wait()
- * returns.  If the status is zero, then the bytecount matches the total
- * from the request.
- *
- * After an error completion, drivers may need to clear a halt condition
- * on the endpoint.
- */
-struct usb_sg_request {
-	int			status;
-	size_t			bytes;
-
-	/* private:
-	 * members below are private to usbcore,
-	 * and are not provided for driver access!
-	 */
-	spinlock_t		lock;
-
-	struct usb_device	*dev;
-	int			pipe;
-
-	int			entries;
-	struct urb		**urbs;
-
-	int			count;
-	struct completion	complete;
-};
-
-int usb_sg_init(
-	struct usb_sg_request	*io,
-	struct usb_device	*dev,
-	unsigned		pipe,
-	unsigned		period,
-	struct scatterlist	*sg,
-	int			nents,
-	size_t			length,
-	gfp_t			mem_flags
-);
-void usb_sg_cancel(struct usb_sg_request *io);
-void usb_sg_wait(struct usb_sg_request *io);
-
-
-/* ----------------------------------------------------------------------- */
-
-/*
- * For various legacy reasons, Linux has a small cookie that's paired with
- * a struct usb_device to identify an endpoint queue.  Queue characteristics
- * are defined by the endpoint's descriptor.  This cookie is called a "pipe",
- * an unsigned int encoded as:
- *
- *  - direction:	bit 7		(0 = Host-to-Device [Out],
- *					 1 = Device-to-Host [In] ...
- *					like endpoint bEndpointAddress)
- *  - device address:	bits 8-14       ... bit positions known to uhci-hcd
- *  - endpoint:		bits 15-18      ... bit positions known to uhci-hcd
- *  - pipe type:	bits 30-31	(00 = isochronous, 01 = interrupt,
- *					 10 = control, 11 = bulk)
- *
- * Given the device address and endpoint descriptor, pipes are redundant.
- */
-
-/* NOTE:  these are not the standard USB_ENDPOINT_XFER_* values!! */
-/* (yet ... they're the values used by usbfs) */
-#define PIPE_ISOCHRONOUS		0
-#define PIPE_INTERRUPT			1
-#define PIPE_CONTROL			2
-#define PIPE_BULK			3
-
-#define usb_pipein(pipe)	((pipe) & USB_DIR_IN)
-#define usb_pipeout(pipe)	(!usb_pipein(pipe))
-
-#define usb_pipedevice(pipe)	(((pipe) >> 8) & 0x7f)
-#define usb_pipeendpoint(pipe)	(((pipe) >> 15) & 0xf)
-
-#define usb_pipetype(pipe)	(((pipe) >> 30) & 3)
-#define usb_pipeisoc(pipe)	(usb_pipetype((pipe)) == PIPE_ISOCHRONOUS)
-#define usb_pipeint(pipe)	(usb_pipetype((pipe)) == PIPE_INTERRUPT)
-#define usb_pipecontrol(pipe)	(usb_pipetype((pipe)) == PIPE_CONTROL)
-#define usb_pipebulk(pipe)	(usb_pipetype((pipe)) == PIPE_BULK)
-
-static inline unsigned int __create_pipe(struct usb_device *dev,
-		unsigned int endpoint)
-{
-	return (dev->devnum << 8) | (endpoint << 15);
-}
-
-/* Create various pipes... */
-#define usb_sndctrlpipe(dev, endpoint)	\
-	((PIPE_CONTROL << 30) | __create_pipe(dev, endpoint))
-#define usb_rcvctrlpipe(dev, endpoint)	\
-	((PIPE_CONTROL << 30) | __create_pipe(dev, endpoint) | USB_DIR_IN)
-#define usb_sndisocpipe(dev, endpoint)	\
-	((PIPE_ISOCHRONOUS << 30) | __create_pipe(dev, endpoint))
-#define usb_rcvisocpipe(dev, endpoint)	\
-	((PIPE_ISOCHRONOUS << 30) | __create_pipe(dev, endpoint) | USB_DIR_IN)
-#define usb_sndbulkpipe(dev, endpoint)	\
-	((PIPE_BULK << 30) | __create_pipe(dev, endpoint))
-#define usb_rcvbulkpipe(dev, endpoint)	\
-	((PIPE_BULK << 30) | __create_pipe(dev, endpoint) | USB_DIR_IN)
-#define usb_sndintpipe(dev, endpoint)	\
-	((PIPE_INTERRUPT << 30) | __create_pipe(dev, endpoint))
-#define usb_rcvintpipe(dev, endpoint)	\
-	((PIPE_INTERRUPT << 30) | __create_pipe(dev, endpoint) | USB_DIR_IN)
-
-static inline struct usb_host_endpoint *
-usb_pipe_endpoint(struct usb_device *dev, unsigned int pipe)
-{
-	struct usb_host_endpoint **eps;
-	eps = usb_pipein(pipe) ? dev->ep_in : dev->ep_out;
-	return eps[usb_pipeendpoint(pipe)];
-}
-
-/*-------------------------------------------------------------------------*/
-
-static inline __u16
-usb_maxpacket(struct usb_device *udev, int pipe, int is_out)
-{
-	struct usb_host_endpoint	*ep;
-	unsigned			epnum = usb_pipeendpoint(pipe);
-
-	if (is_out) {
-		WARN_ON(usb_pipein(pipe));
-		ep = udev->ep_out[epnum];
-	} else {
-		WARN_ON(usb_pipeout(pipe));
-		ep = udev->ep_in[epnum];
-	}
-	if (!ep)
-		return 0;
-
-	/* NOTE:  only 0x07ff bits are for packet size... */
-	return usb_endpoint_maxp(&ep->desc);
-}
-
-/* ----------------------------------------------------------------------- */
-
-/* translate USB error codes to codes user space understands */
-static inline int usb_translate_errors(int error_code)
-{
-	switch (error_code) {
-	case 0:
-	case -ENOMEM:
-	case -ENODEV:
-		return error_code;
-	default:
-		return -EIO;
-	}
-}
-
-/* Events from the usb core */
-#define USB_DEVICE_ADD		0x0001
-#define USB_DEVICE_REMOVE	0x0002
-#define USB_BUS_ADD		0x0003
-#define USB_BUS_REMOVE		0x0004
-extern void usb_register_notify(struct notifier_block *nb);
-extern void usb_unregister_notify(struct notifier_block *nb);
-
-#ifdef DEBUG
-#define dbg(format, arg...)						\
-	printk(KERN_DEBUG "%s: " format "\n", __FILE__, ##arg)
-#else
-#define dbg(format, arg...)						\
-do {									\
-	if (0)								\
-		printk(KERN_DEBUG "%s: " format "\n", __FILE__, ##arg); \
-} while (0)
-#endif
-
-#define err(format, arg...)					\
-	printk(KERN_ERR KBUILD_MODNAME ": " format "\n", ##arg)
-
-/* debugfs stuff */
-extern struct dentry *usb_debug_root;
-
-#endif  /* __KERNEL__ */
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/usb/Kbuild b/ANDROID_3.4.5/include/linux/usb/Kbuild
deleted file mode 100644
index b607f353..00000000
--- a/ANDROID_3.4.5/include/linux/usb/Kbuild
+++ /dev/null
@@ -1,10 +0,0 @@
-header-y += audio.h
-header-y += cdc.h
-header-y += ch9.h
-header-y += ch11.h
-header-y += functionfs.h
-header-y += gadgetfs.h
-header-y += midi.h
-header-y += g_printer.h
-header-y += tmc.h
-header-y += video.h
diff --git a/ANDROID_3.4.5/include/linux/usb/association.h b/ANDROID_3.4.5/include/linux/usb/association.h
deleted file mode 100644
index 0a4a18b3..00000000
--- a/ANDROID_3.4.5/include/linux/usb/association.h
+++ /dev/null
@@ -1,150 +0,0 @@
-/*
- * Wireless USB - Cable Based Association
- *
- * Copyright (C) 2006 Intel Corporation
- * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version
- * 2 as published by the Free Software Foundation.
- *
- */
-#ifndef __LINUX_USB_ASSOCIATION_H
-#define __LINUX_USB_ASSOCIATION_H
-
-
-/*
- * Association attributes
- *
- * Association Models Supplement to WUSB 1.0 T[3-1]
- *
- * Each field in the structures has it's ID, it's length and then the
- * value. This is the actual definition of the field's ID and its
- * length.
- */
-struct wusb_am_attr {
-	__u8 id;
-	__u8 len;
-};
-
-/* Different fields defined by the spec */
-#define WUSB_AR_AssociationTypeId	{ .id = cpu_to_le16(0x0000), .len = cpu_to_le16(2) }
-#define WUSB_AR_AssociationSubTypeId	{ .id = cpu_to_le16(0x0001), .len = cpu_to_le16(2) }
-#define WUSB_AR_Length			{ .id = cpu_to_le16(0x0002), .len = cpu_to_le16(4) }
-#define WUSB_AR_AssociationStatus	{ .id = cpu_to_le16(0x0004), .len = cpu_to_le16(4) }
-#define WUSB_AR_LangID			{ .id = cpu_to_le16(0x0008), .len = cpu_to_le16(2) }
-#define WUSB_AR_DeviceFriendlyName	{ .id = cpu_to_le16(0x000b), .len = cpu_to_le16(64) } /* max */
-#define WUSB_AR_HostFriendlyName	{ .id = cpu_to_le16(0x000c), .len = cpu_to_le16(64) } /* max */
-#define WUSB_AR_CHID			{ .id = cpu_to_le16(0x1000), .len = cpu_to_le16(16) }
-#define WUSB_AR_CDID			{ .id = cpu_to_le16(0x1001), .len = cpu_to_le16(16) }
-#define WUSB_AR_ConnectionContext	{ .id = cpu_to_le16(0x1002), .len = cpu_to_le16(48) }
-#define WUSB_AR_BandGroups		{ .id = cpu_to_le16(0x1004), .len = cpu_to_le16(2) }
-
-/* CBAF Control Requests (AMS1.0[T4-1] */
-enum {
-	CBAF_REQ_GET_ASSOCIATION_INFORMATION = 0x01,
-	CBAF_REQ_GET_ASSOCIATION_REQUEST,
-	CBAF_REQ_SET_ASSOCIATION_RESPONSE
-};
-
-/*
- * CBAF USB-interface defitions
- *
- * No altsettings, one optional interrupt endpoint.
- */
-enum {
-	CBAF_IFACECLASS    = 0xef,
-	CBAF_IFACESUBCLASS = 0x03,
-	CBAF_IFACEPROTOCOL = 0x01,
-};
-
-/* Association Information (AMS1.0[T4-3]) */
-struct wusb_cbaf_assoc_info {
-	__le16 Length;
-	__u8 NumAssociationRequests;
-	__le16 Flags;
-	__u8 AssociationRequestsArray[];
-} __attribute__((packed));
-
-/* Association Request (AMS1.0[T4-4]) */
-struct wusb_cbaf_assoc_request {
-	__u8 AssociationDataIndex;
-	__u8 Reserved;
-	__le16 AssociationTypeId;
-	__le16 AssociationSubTypeId;
-	__le32 AssociationTypeInfoSize;
-} __attribute__((packed));
-
-enum {
-	AR_TYPE_WUSB                    = 0x0001,
-	AR_TYPE_WUSB_RETRIEVE_HOST_INFO = 0x0000,
-	AR_TYPE_WUSB_ASSOCIATE          = 0x0001,
-};
-
-/* Association Attribute header (AMS1.0[3.8]) */
-struct wusb_cbaf_attr_hdr {
-	__le16 id;
-	__le16 len;
-} __attribute__((packed));
-
-/* Host Info (AMS1.0[T4-7]) (yeah, more headers and fields...) */
-struct wusb_cbaf_host_info {
-	struct wusb_cbaf_attr_hdr AssociationTypeId_hdr;
-	__le16 AssociationTypeId;
-	struct wusb_cbaf_attr_hdr AssociationSubTypeId_hdr;
-	__le16 AssociationSubTypeId;
-	struct wusb_cbaf_attr_hdr CHID_hdr;
-	struct wusb_ckhdid CHID;
-	struct wusb_cbaf_attr_hdr LangID_hdr;
-	__le16 LangID;
-	struct wusb_cbaf_attr_hdr HostFriendlyName_hdr;
-	__u8 HostFriendlyName[];
-} __attribute__((packed));
-
-/* Device Info (AMS1.0[T4-8])
- *
- * I still don't get this tag'n'header stuff for each goddamn
- * field...
- */
-struct wusb_cbaf_device_info {
-	struct wusb_cbaf_attr_hdr Length_hdr;
-	__le32 Length;
-	struct wusb_cbaf_attr_hdr CDID_hdr;
-	struct wusb_ckhdid CDID;
-	struct wusb_cbaf_attr_hdr BandGroups_hdr;
-	__le16 BandGroups;
-	struct wusb_cbaf_attr_hdr LangID_hdr;
-	__le16 LangID;
-	struct wusb_cbaf_attr_hdr DeviceFriendlyName_hdr;
-	__u8 DeviceFriendlyName[];
-} __attribute__((packed));
-
-/* Connection Context; CC_DATA - Success case (AMS1.0[T4-9]) */
-struct wusb_cbaf_cc_data {
-	struct wusb_cbaf_attr_hdr AssociationTypeId_hdr;
-	__le16 AssociationTypeId;
-	struct wusb_cbaf_attr_hdr AssociationSubTypeId_hdr;
-	__le16 AssociationSubTypeId;
-	struct wusb_cbaf_attr_hdr Length_hdr;
-	__le32 Length;
-	struct wusb_cbaf_attr_hdr ConnectionContext_hdr;
-	struct wusb_ckhdid CHID;
-	struct wusb_ckhdid CDID;
-	struct wusb_ckhdid CK;
-	struct wusb_cbaf_attr_hdr BandGroups_hdr;
-	__le16 BandGroups;
-} __attribute__((packed));
-
-/* CC_DATA - Failure case (AMS1.0[T4-10]) */
-struct wusb_cbaf_cc_data_fail {
-	struct wusb_cbaf_attr_hdr AssociationTypeId_hdr;
-	__le16 AssociationTypeId;
-	struct wusb_cbaf_attr_hdr AssociationSubTypeId_hdr;
-	__le16 AssociationSubTypeId;
-	struct wusb_cbaf_attr_hdr Length_hdr;
-	__le16 Length;
-	struct wusb_cbaf_attr_hdr AssociationStatus_hdr;
-	__u32 AssociationStatus;
-} __attribute__((packed));
-
-#endif	/* __LINUX_USB_ASSOCIATION_H */
diff --git a/ANDROID_3.4.5/include/linux/usb/atmel_usba_udc.h b/ANDROID_3.4.5/include/linux/usb/atmel_usba_udc.h
deleted file mode 100644
index ba99af27..00000000
--- a/ANDROID_3.4.5/include/linux/usb/atmel_usba_udc.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * Platform data definitions for Atmel USBA gadget driver.
- */
-#ifndef __LINUX_USB_USBA_H
-#define __LINUX_USB_USBA_H
-
-struct usba_ep_data {
-	char	*name;
-	int	index;
-	int	fifo_size;
-	int	nr_banks;
-	int	can_dma;
-	int	can_isoc;
-};
-
-struct usba_platform_data {
-	int			vbus_pin;
-	int			vbus_pin_inverted;
-	int			num_ep;
-	struct usba_ep_data	ep[0];
-};
-
-#endif /* __LINUX_USB_USBA_H */
diff --git a/ANDROID_3.4.5/include/linux/usb/audio-v2.h b/ANDROID_3.4.5/include/linux/usb/audio-v2.h
deleted file mode 100644
index ed130531..00000000
--- a/ANDROID_3.4.5/include/linux/usb/audio-v2.h
+++ /dev/null
@@ -1,459 +0,0 @@
-/*
- * Copyright (c) 2010 Daniel Mack <daniel@caiaq.de>
- *
- * This software is distributed under the terms of the GNU General Public
- * License ("GPL") version 2, as published by the Free Software Foundation.
- *
- * This file holds USB constants and structures defined
- * by the USB Device Class Definition for Audio Devices in version 2.0.
- * Comments below reference relevant sections of the documents contained
- * in http://www.usb.org/developers/devclass_docs/Audio2.0_final.zip
- */
-
-#ifndef __LINUX_USB_AUDIO_V2_H
-#define __LINUX_USB_AUDIO_V2_H
-
-#include <linux/types.h>
-
-/* v1.0 and v2.0 of this standard have many things in common. For the rest
- * of the definitions, please refer to audio.h */
-
-/*
- * bmControl field decoders
- *
- * From the USB Audio spec v2.0:
- *
- *   bmaControls() is a (ch+1)-element array of 4-byte bitmaps,
- *   each containing a set of bit pairs. If a Control is present,
- *   it must be Host readable. If a certain Control is not
- *   present then the bit pair must be set to 0b00.
- *   If a Control is present but read-only, the bit pair must be
- *   set to 0b01. If a Control is also Host programmable, the bit
- *   pair must be set to 0b11. The value 0b10 is not allowed.
- *
- */
-
-static inline bool uac2_control_is_readable(u32 bmControls, u8 control)
-{
-	return (bmControls >> (control * 2)) & 0x1;
-}
-
-static inline bool uac2_control_is_writeable(u32 bmControls, u8 control)
-{
-	return (bmControls >> (control * 2)) & 0x2;
-}
-
-/* 4.7.2 Class-Specific AC Interface Descriptor */
-struct uac2_ac_header_descriptor {
-	__u8  bLength;			/* 9 */
-	__u8  bDescriptorType;		/* USB_DT_CS_INTERFACE */
-	__u8  bDescriptorSubtype;	/* UAC_MS_HEADER */
-	__le16 bcdADC;			/* 0x0200 */
-	__u8  bCategory;
-	__le16 wTotalLength;		/* includes Unit and Terminal desc. */
-	__u8  bmControls;
-} __packed;
-
-/* 2.3.1.6 Type I Format Type Descriptor (Frmts20 final.pdf)*/
-struct uac2_format_type_i_descriptor {
-	__u8  bLength;			/* in bytes: 6 */
-	__u8  bDescriptorType;		/* USB_DT_CS_INTERFACE */
-	__u8  bDescriptorSubtype;	/* FORMAT_TYPE */
-	__u8  bFormatType;		/* FORMAT_TYPE_1 */
-	__u8  bSubslotSize;		/* {1,2,3,4} */
-	__u8  bBitResolution;
-} __packed;
-
-/* 4.7.2.1 Clock Source Descriptor */
-
-struct uac_clock_source_descriptor {
-	__u8 bLength;
-	__u8 bDescriptorType;
-	__u8 bDescriptorSubtype;
-	__u8 bClockID;
-	__u8 bmAttributes;
-	__u8 bmControls;
-	__u8 bAssocTerminal;
-	__u8 iClockSource;
-} __attribute__((packed));
-
-/* bmAttribute fields */
-#define UAC_CLOCK_SOURCE_TYPE_EXT	0x0
-#define UAC_CLOCK_SOURCE_TYPE_INT_FIXED	0x1
-#define UAC_CLOCK_SOURCE_TYPE_INT_VAR	0x2
-#define UAC_CLOCK_SOURCE_TYPE_INT_PROG	0x3
-#define UAC_CLOCK_SOURCE_SYNCED_TO_SOF	(1 << 2)
-
-/* 4.7.2.2 Clock Source Descriptor */
-
-struct uac_clock_selector_descriptor {
-	__u8 bLength;
-	__u8 bDescriptorType;
-	__u8 bDescriptorSubtype;
-	__u8 bClockID;
-	__u8 bNrInPins;
-	__u8 baCSourceID[];
-	/* bmControls, bAssocTerminal and iClockSource omitted */
-} __attribute__((packed));
-
-/* 4.7.2.3 Clock Multiplier Descriptor */
-
-struct uac_clock_multiplier_descriptor {
-	__u8 bLength;
-	__u8 bDescriptorType;
-	__u8 bDescriptorSubtype;
-	__u8 bClockID;
-	__u8 bCSourceID;
-	__u8 bmControls;
-	__u8 iClockMultiplier;
-} __attribute__((packed));
-
-/* 4.7.2.4 Input terminal descriptor */
-
-struct uac2_input_terminal_descriptor {
-	__u8 bLength;
-	__u8 bDescriptorType;
-	__u8 bDescriptorSubtype;
-	__u8 bTerminalID;
-	__u16 wTerminalType;
-	__u8 bAssocTerminal;
-	__u8 bCSourceID;
-	__u8 bNrChannels;
-	__u32 bmChannelConfig;
-	__u8 iChannelNames;
-	__u16 bmControls;
-	__u8 iTerminal;
-} __attribute__((packed));
-
-/* 4.7.2.5 Output terminal descriptor */
-
-struct uac2_output_terminal_descriptor {
-	__u8 bLength;
-	__u8 bDescriptorType;
-	__u8 bDescriptorSubtype;
-	__u8 bTerminalID;
-	__u16 wTerminalType;
-	__u8 bAssocTerminal;
-	__u8 bSourceID;
-	__u8 bCSourceID;
-	__u16 bmControls;
-	__u8 iTerminal;
-} __attribute__((packed));
-
-
-
-/* 4.7.2.8 Feature Unit Descriptor */
-
-struct uac2_feature_unit_descriptor {
-	__u8 bLength;
-	__u8 bDescriptorType;
-	__u8 bDescriptorSubtype;
-	__u8 bUnitID;
-	__u8 bSourceID;
-	/* bmaControls is actually u32,
-	 * but u8 is needed for the hybrid parser */
-	__u8 bmaControls[0]; /* variable length */
-} __attribute__((packed));
-
-/* 4.9.2 Class-Specific AS Interface Descriptor */
-
-struct uac2_as_header_descriptor {
-	__u8 bLength;
-	__u8 bDescriptorType;
-	__u8 bDescriptorSubtype;
-	__u8 bTerminalLink;
-	__u8 bmControls;
-	__u8 bFormatType;
-	__u32 bmFormats;
-	__u8 bNrChannels;
-	__u32 bmChannelConfig;
-	__u8 iChannelNames;
-} __attribute__((packed));
-
-/* 4.10.1.2 Class-Specific AS Isochronous Audio Data Endpoint Descriptor */
-
-struct uac2_iso_endpoint_descriptor {
-	__u8  bLength;			/* in bytes: 8 */
-	__u8  bDescriptorType;		/* USB_DT_CS_ENDPOINT */
-	__u8  bDescriptorSubtype;	/* EP_GENERAL */
-	__u8  bmAttributes;
-	__u8  bmControls;
-	__u8  bLockDelayUnits;
-	__le16 wLockDelay;
-} __attribute__((packed));
-
-#define UAC2_CONTROL_PITCH		(3 << 0)
-#define UAC2_CONTROL_DATA_OVERRUN	(3 << 2)
-#define UAC2_CONTROL_DATA_UNDERRUN	(3 << 4)
-
-/* 6.1 Interrupt Data Message */
-
-#define UAC2_INTERRUPT_DATA_MSG_VENDOR	(1 << 0)
-#define UAC2_INTERRUPT_DATA_MSG_EP	(1 << 1)
-
-struct uac2_interrupt_data_msg {
-	__u8 bInfo;
-	__u8 bAttribute;
-	__le16 wValue;
-	__le16 wIndex;
-} __attribute__((packed));
-
-/* A.7 Audio Function Category Codes */
-#define UAC2_FUNCTION_SUBCLASS_UNDEFINED	0x00
-#define UAC2_FUNCTION_DESKTOP_SPEAKER		0x01
-#define UAC2_FUNCTION_HOME_THEATER		0x02
-#define UAC2_FUNCTION_MICROPHONE		0x03
-#define UAC2_FUNCTION_HEADSET			0x04
-#define UAC2_FUNCTION_TELEPHONE			0x05
-#define UAC2_FUNCTION_CONVERTER			0x06
-#define UAC2_FUNCTION_SOUND_RECORDER		0x07
-#define UAC2_FUNCTION_IO_BOX			0x08
-#define UAC2_FUNCTION_MUSICAL_INSTRUMENT	0x09
-#define UAC2_FUNCTION_PRO_AUDIO			0x0a
-#define UAC2_FUNCTION_AUDIO_VIDEO		0x0b
-#define UAC2_FUNCTION_CONTROL_PANEL		0x0c
-#define UAC2_FUNCTION_OTHER			0xff
-
-/* A.9 Audio Class-Specific AC Interface Descriptor Subtypes */
-/* see audio.h for the rest, which is identical to v1 */
-#define UAC2_EFFECT_UNIT			0x07
-#define UAC2_PROCESSING_UNIT_V2		0x08
-#define UAC2_EXTENSION_UNIT_V2		0x09
-#define UAC2_CLOCK_SOURCE		0x0a
-#define UAC2_CLOCK_SELECTOR		0x0b
-#define UAC2_CLOCK_MULTIPLIER		0x0c
-#define UAC2_SAMPLE_RATE_CONVERTER	0x0d
-
-/* A.10 Audio Class-Specific AS Interface Descriptor Subtypes */
-/* see audio.h for the rest, which is identical to v1 */
-#define UAC2_ENCODER			0x03
-#define UAC2_DECODER			0x04
-
-/* A.11 Effect Unit Effect Types */
-#define UAC2_EFFECT_UNDEFINED		0x00
-#define UAC2_EFFECT_PARAM_EQ		0x01
-#define UAC2_EFFECT_REVERB		0x02
-#define UAC2_EFFECT_MOD_DELAY		0x03
-#define UAC2_EFFECT_DYN_RANGE_COMP	0x04
-
-/* A.12 Processing Unit Process Types */
-#define UAC2_PROCESS_UNDEFINED		0x00
-#define UAC2_PROCESS_UP_DOWNMIX		0x01
-#define UAC2_PROCESS_DOLBY_PROLOCIC	0x02
-#define UAC2_PROCESS_STEREO_EXTENDER	0x03
-
-/* A.14 Audio Class-Specific Request Codes */
-#define UAC2_CS_CUR			0x01
-#define UAC2_CS_RANGE			0x02
-#define UAC2_CS_MEM			0x03
-
-/* A.15 Encoder Type Codes */
-#define UAC2_ENCODER_UNDEFINED		0x00
-#define UAC2_ENCODER_OTHER		0x01
-#define UAC2_ENCODER_MPEG		0x02
-#define UAC2_ENCODER_AC3		0x03
-#define UAC2_ENCODER_WMA		0x04
-#define UAC2_ENCODER_DTS		0x05
-
-/* A.16 Decoder Type Codes */
-#define UAC2_DECODER_UNDEFINED		0x00
-#define UAC2_DECODER_OTHER		0x01
-#define UAC2_DECODER_MPEG		0x02
-#define UAC2_DECODER_AC3		0x03
-#define UAC2_DECODER_WMA		0x04
-#define UAC2_DECODER_DTS		0x05
-
-/* A.17.1 Clock Source Control Selectors */
-#define UAC2_CS_UNDEFINED		0x00
-#define UAC2_CS_CONTROL_SAM_FREQ	0x01
-#define UAC2_CS_CONTROL_CLOCK_VALID	0x02
-
-/* A.17.2 Clock Selector Control Selectors */
-#define UAC2_CX_UNDEFINED		0x00
-#define UAC2_CX_CLOCK_SELECTOR		0x01
-
-/* A.17.3 Clock Multiplier Control Selectors */
-#define UAC2_CM_UNDEFINED		0x00
-#define UAC2_CM_NUMERATOR		0x01
-#define UAC2_CM_DENOMINTATOR		0x02
-
-/* A.17.4 Terminal Control Selectors */
-#define UAC2_TE_UNDEFINED		0x00
-#define UAC2_TE_COPY_PROTECT		0x01
-#define UAC2_TE_CONNECTOR		0x02
-#define UAC2_TE_OVERLOAD		0x03
-#define UAC2_TE_CLUSTER			0x04
-#define UAC2_TE_UNDERFLOW		0x05
-#define UAC2_TE_OVERFLOW		0x06
-#define UAC2_TE_LATENCY			0x07
-
-/* A.17.5 Mixer Control Selectors */
-#define UAC2_MU_UNDEFINED		0x00
-#define UAC2_MU_MIXER			0x01
-#define UAC2_MU_CLUSTER			0x02
-#define UAC2_MU_UNDERFLOW		0x03
-#define UAC2_MU_OVERFLOW		0x04
-#define UAC2_MU_LATENCY			0x05
-
-/* A.17.6 Selector Control Selectors */
-#define UAC2_SU_UNDEFINED		0x00
-#define UAC2_SU_SELECTOR		0x01
-#define UAC2_SU_LATENCY			0x02
-
-/* A.17.7 Feature Unit Control Selectors */
-/* see audio.h for the rest, which is identical to v1 */
-#define UAC2_FU_INPUT_GAIN		0x0b
-#define UAC2_FU_INPUT_GAIN_PAD		0x0c
-#define UAC2_FU_PHASE_INVERTER		0x0d
-#define UAC2_FU_UNDERFLOW		0x0e
-#define UAC2_FU_OVERFLOW		0x0f
-#define UAC2_FU_LATENCY			0x10
-
-/* A.17.8.1 Parametric Equalizer Section Effect Unit Control Selectors */
-#define UAC2_PE_UNDEFINED		0x00
-#define UAC2_PE_ENABLE			0x01
-#define UAC2_PE_CENTERFREQ		0x02
-#define UAC2_PE_QFACTOR			0x03
-#define UAC2_PE_GAIN			0x04
-#define UAC2_PE_UNDERFLOW		0x05
-#define UAC2_PE_OVERFLOW		0x06
-#define UAC2_PE_LATENCY			0x07
-
-/* A.17.8.2 Reverberation Effect Unit Control Selectors */
-#define UAC2_RV_UNDEFINED		0x00
-#define UAC2_RV_ENABLE			0x01
-#define UAC2_RV_TYPE			0x02
-#define UAC2_RV_LEVEL			0x03
-#define UAC2_RV_TIME			0x04
-#define UAC2_RV_FEEDBACK		0x05
-#define UAC2_RV_PREDELAY		0x06
-#define UAC2_RV_DENSITY			0x07
-#define UAC2_RV_HIFREQ_ROLLOFF		0x08
-#define UAC2_RV_UNDERFLOW		0x09
-#define UAC2_RV_OVERFLOW		0x0a
-#define UAC2_RV_LATENCY			0x0b
-
-/* A.17.8.3 Modulation Delay Effect Control Selectors */
-#define UAC2_MD_UNDEFINED		0x00
-#define UAC2_MD_ENABLE			0x01
-#define UAC2_MD_BALANCE			0x02
-#define UAC2_MD_RATE			0x03
-#define UAC2_MD_DEPTH			0x04
-#define UAC2_MD_TIME			0x05
-#define UAC2_MD_FEEDBACK		0x06
-#define UAC2_MD_UNDERFLOW		0x07
-#define UAC2_MD_OVERFLOW		0x08
-#define UAC2_MD_LATENCY			0x09
-
-/* A.17.8.4 Dynamic Range Compressor Effect Unit Control Selectors */
-#define UAC2_DR_UNDEFINED		0x00
-#define UAC2_DR_ENABLE			0x01
-#define UAC2_DR_COMPRESSION_RATE	0x02
-#define UAC2_DR_MAXAMPL			0x03
-#define UAC2_DR_THRESHOLD		0x04
-#define UAC2_DR_ATTACK_TIME		0x05
-#define UAC2_DR_RELEASE_TIME		0x06
-#define UAC2_DR_UNDEFLOW		0x07
-#define UAC2_DR_OVERFLOW		0x08
-#define UAC2_DR_LATENCY			0x09
-
-/* A.17.9.1 Up/Down-mix Processing Unit Control Selectors */
-#define UAC2_UD_UNDEFINED		0x00
-#define UAC2_UD_ENABLE			0x01
-#define UAC2_UD_MODE_SELECT		0x02
-#define UAC2_UD_CLUSTER			0x03
-#define UAC2_UD_UNDERFLOW		0x04
-#define UAC2_UD_OVERFLOW		0x05
-#define UAC2_UD_LATENCY			0x06
-
-/* A.17.9.2 Dolby Prologic[tm] Processing Unit Control Selectors */
-#define UAC2_DP_UNDEFINED		0x00
-#define UAC2_DP_ENABLE			0x01
-#define UAC2_DP_MODE_SELECT		0x02
-#define UAC2_DP_CLUSTER			0x03
-#define UAC2_DP_UNDERFFLOW		0x04
-#define UAC2_DP_OVERFLOW		0x05
-#define UAC2_DP_LATENCY			0x06
-
-/* A.17.9.3 Stereo Expander Processing Unit Control Selectors */
-#define UAC2_ST_EXT_UNDEFINED		0x00
-#define UAC2_ST_EXT_ENABLE		0x01
-#define UAC2_ST_EXT_WIDTH		0x02
-#define UAC2_ST_EXT_UNDEFLOW		0x03
-#define UAC2_ST_EXT_OVERFLOW		0x04
-#define UAC2_ST_EXT_LATENCY		0x05
-
-/* A.17.10 Extension Unit Control Selectors */
-#define UAC2_XU_UNDEFINED		0x00
-#define UAC2_XU_ENABLE			0x01
-#define UAC2_XU_CLUSTER			0x02
-#define UAC2_XU_UNDERFLOW		0x03
-#define UAC2_XU_OVERFLOW		0x04
-#define UAC2_XU_LATENCY			0x05
-
-/* A.17.11 AudioStreaming Interface Control Selectors */
-#define UAC2_AS_UNDEFINED		0x00
-#define UAC2_AS_ACT_ALT_SETTING		0x01
-#define UAC2_AS_VAL_ALT_SETTINGS	0x02
-#define UAC2_AS_AUDIO_DATA_FORMAT	0x03
-
-/* A.17.12 Encoder Control Selectors */
-#define UAC2_EN_UNDEFINED		0x00
-#define UAC2_EN_BIT_RATE		0x01
-#define UAC2_EN_QUALITY			0x02
-#define UAC2_EN_VBR			0x03
-#define UAC2_EN_TYPE			0x04
-#define UAC2_EN_UNDERFLOW		0x05
-#define UAC2_EN_OVERFLOW		0x06
-#define UAC2_EN_ENCODER_ERROR		0x07
-#define UAC2_EN_PARAM1			0x08
-#define UAC2_EN_PARAM2			0x09
-#define UAC2_EN_PARAM3			0x0a
-#define UAC2_EN_PARAM4			0x0b
-#define UAC2_EN_PARAM5			0x0c
-#define UAC2_EN_PARAM6			0x0d
-#define UAC2_EN_PARAM7			0x0e
-#define UAC2_EN_PARAM8			0x0f
-
-/* A.17.13.1 MPEG Decoder Control Selectors */
-#define UAC2_MPEG_UNDEFINED		0x00
-#define UAC2_MPEG_DUAL_CHANNEL		0x01
-#define UAC2_MPEG_SECOND_STEREO		0x02
-#define UAC2_MPEG_MULTILINGUAL		0x03
-#define UAC2_MPEG_DYN_RANGE		0x04
-#define UAC2_MPEG_SCALING		0x05
-#define UAC2_MPEG_HILO_SCALING		0x06
-#define UAC2_MPEG_UNDERFLOW		0x07
-#define UAC2_MPEG_OVERFLOW		0x08
-#define UAC2_MPEG_DECODER_ERROR		0x09
-
-/* A17.13.2 AC3 Decoder Control Selectors */
-#define UAC2_AC3_UNDEFINED		0x00
-#define UAC2_AC3_MODE			0x01
-#define UAC2_AC3_DYN_RANGE		0x02
-#define UAC2_AC3_SCALING		0x03
-#define UAC2_AC3_HILO_SCALING		0x04
-#define UAC2_AC3_UNDERFLOW		0x05
-#define UAC2_AC3_OVERFLOW		0x06
-#define UAC2_AC3_DECODER_ERROR		0x07
-
-/* A17.13.3 WMA Decoder Control Selectors */
-#define UAC2_WMA_UNDEFINED		0x00
-#define UAC2_WMA_UNDERFLOW		0x01
-#define UAC2_WMA_OVERFLOW		0x02
-#define UAC2_WMA_DECODER_ERROR		0x03
-
-/* A17.13.4 DTS Decoder Control Selectors */
-#define UAC2_DTS_UNDEFINED		0x00
-#define UAC2_DTS_UNDERFLOW		0x01
-#define UAC2_DTS_OVERFLOW		0x02
-#define UAC2_DTS_DECODER_ERROR		0x03
-
-/* A17.14 Endpoint Control Selectors */
-#define UAC2_EP_CS_UNDEFINED		0x00
-#define UAC2_EP_CS_PITCH		0x01
-#define UAC2_EP_CS_DATA_OVERRUN		0x02
-#define UAC2_EP_CS_DATA_UNDERRUN	0x03
-
-#endif /* __LINUX_USB_AUDIO_V2_H */
-
diff --git a/ANDROID_3.4.5/include/linux/usb/audio.h b/ANDROID_3.4.5/include/linux/usb/audio.h
deleted file mode 100644
index a54b8255..00000000
--- a/ANDROID_3.4.5/include/linux/usb/audio.h
+++ /dev/null
@@ -1,566 +0,0 @@
-/*
- * <linux/usb/audio.h> -- USB Audio definitions.
- *
- * Copyright (C) 2006 Thumtronics Pty Ltd.
- * Developed for Thumtronics by Grey Innovation
- * Ben Williamson <ben.williamson@greyinnovation.com>
- *
- * This software is distributed under the terms of the GNU General Public
- * License ("GPL") version 2, as published by the Free Software Foundation.
- *
- * This file holds USB constants and structures defined
- * by the USB Device Class Definition for Audio Devices.
- * Comments below reference relevant sections of that document:
- *
- * http://www.usb.org/developers/devclass_docs/audio10.pdf
- *
- * Types and defines in this file are either specific to version 1.0 of
- * this standard or common for newer versions.
- */
-
-#ifndef __LINUX_USB_AUDIO_H
-#define __LINUX_USB_AUDIO_H
-
-#include <linux/types.h>
-
-/* bInterfaceProtocol values to denote the version of the standard used */
-#define UAC_VERSION_1			0x00
-#define UAC_VERSION_2			0x20
-
-/* A.2 Audio Interface Subclass Codes */
-#define USB_SUBCLASS_AUDIOCONTROL	0x01
-#define USB_SUBCLASS_AUDIOSTREAMING	0x02
-#define USB_SUBCLASS_MIDISTREAMING	0x03
-
-/* A.5 Audio Class-Specific AC Interface Descriptor Subtypes */
-#define UAC_HEADER			0x01
-#define UAC_INPUT_TERMINAL		0x02
-#define UAC_OUTPUT_TERMINAL		0x03
-#define UAC_MIXER_UNIT			0x04
-#define UAC_SELECTOR_UNIT		0x05
-#define UAC_FEATURE_UNIT		0x06
-#define UAC1_PROCESSING_UNIT		0x07
-#define UAC1_EXTENSION_UNIT		0x08
-
-/* A.6 Audio Class-Specific AS Interface Descriptor Subtypes */
-#define UAC_AS_GENERAL			0x01
-#define UAC_FORMAT_TYPE			0x02
-#define UAC_FORMAT_SPECIFIC		0x03
-
-/* A.7 Processing Unit Process Types */
-#define UAC_PROCESS_UNDEFINED		0x00
-#define UAC_PROCESS_UP_DOWNMIX		0x01
-#define UAC_PROCESS_DOLBY_PROLOGIC	0x02
-#define UAC_PROCESS_STEREO_EXTENDER	0x03
-#define UAC_PROCESS_REVERB		0x04
-#define UAC_PROCESS_CHORUS		0x05
-#define UAC_PROCESS_DYN_RANGE_COMP	0x06
-
-/* A.8 Audio Class-Specific Endpoint Descriptor Subtypes */
-#define UAC_EP_GENERAL			0x01
-
-/* A.9 Audio Class-Specific Request Codes */
-#define UAC_SET_			0x00
-#define UAC_GET_			0x80
-
-#define UAC__CUR			0x1
-#define UAC__MIN			0x2
-#define UAC__MAX			0x3
-#define UAC__RES			0x4
-#define UAC__MEM			0x5
-
-#define UAC_SET_CUR			(UAC_SET_ | UAC__CUR)
-#define UAC_GET_CUR			(UAC_GET_ | UAC__CUR)
-#define UAC_SET_MIN			(UAC_SET_ | UAC__MIN)
-#define UAC_GET_MIN			(UAC_GET_ | UAC__MIN)
-#define UAC_SET_MAX			(UAC_SET_ | UAC__MAX)
-#define UAC_GET_MAX			(UAC_GET_ | UAC__MAX)
-#define UAC_SET_RES			(UAC_SET_ | UAC__RES)
-#define UAC_GET_RES			(UAC_GET_ | UAC__RES)
-#define UAC_SET_MEM			(UAC_SET_ | UAC__MEM)
-#define UAC_GET_MEM			(UAC_GET_ | UAC__MEM)
-
-#define UAC_GET_STAT			0xff
-
-/* A.10 Control Selector Codes */
-
-/* A.10.1 Terminal Control Selectors */
-#define UAC_TERM_COPY_PROTECT		0x01
-
-/* A.10.2 Feature Unit Control Selectors */
-#define UAC_FU_MUTE			0x01
-#define UAC_FU_VOLUME			0x02
-#define UAC_FU_BASS			0x03
-#define UAC_FU_MID			0x04
-#define UAC_FU_TREBLE			0x05
-#define UAC_FU_GRAPHIC_EQUALIZER	0x06
-#define UAC_FU_AUTOMATIC_GAIN		0x07
-#define UAC_FU_DELAY			0x08
-#define UAC_FU_BASS_BOOST		0x09
-#define UAC_FU_LOUDNESS			0x0a
-
-#define UAC_CONTROL_BIT(CS)	(1 << ((CS) - 1))
-
-/* A.10.3.1 Up/Down-mix Processing Unit Controls Selectors */
-#define UAC_UD_ENABLE			0x01
-#define UAC_UD_MODE_SELECT		0x02
-
-/* A.10.3.2 Dolby Prologic (tm) Processing Unit Controls Selectors */
-#define UAC_DP_ENABLE			0x01
-#define UAC_DP_MODE_SELECT		0x02
-
-/* A.10.3.3 3D Stereo Extender Processing Unit Control Selectors */
-#define UAC_3D_ENABLE			0x01
-#define UAC_3D_SPACE			0x02
-
-/* A.10.3.4 Reverberation Processing Unit Control Selectors */
-#define UAC_REVERB_ENABLE		0x01
-#define UAC_REVERB_LEVEL		0x02
-#define UAC_REVERB_TIME			0x03
-#define UAC_REVERB_FEEDBACK		0x04
-
-/* A.10.3.5 Chorus Processing Unit Control Selectors */
-#define UAC_CHORUS_ENABLE		0x01
-#define UAC_CHORUS_LEVEL		0x02
-#define UAC_CHORUS_RATE			0x03
-#define UAC_CHORUS_DEPTH		0x04
-
-/* A.10.3.6 Dynamic Range Compressor Unit Control Selectors */
-#define UAC_DCR_ENABLE			0x01
-#define UAC_DCR_RATE			0x02
-#define UAC_DCR_MAXAMPL			0x03
-#define UAC_DCR_THRESHOLD		0x04
-#define UAC_DCR_ATTACK_TIME		0x05
-#define UAC_DCR_RELEASE_TIME		0x06
-
-/* A.10.4 Extension Unit Control Selectors */
-#define UAC_XU_ENABLE			0x01
-
-/* MIDI - A.1 MS Class-Specific Interface Descriptor Subtypes */
-#define UAC_MS_HEADER			0x01
-#define UAC_MIDI_IN_JACK		0x02
-#define UAC_MIDI_OUT_JACK		0x03
-
-/* MIDI - A.1 MS Class-Specific Endpoint Descriptor Subtypes */
-#define UAC_MS_GENERAL			0x01
-
-/* Terminals - 2.1 USB Terminal Types */
-#define UAC_TERMINAL_UNDEFINED		0x100
-#define UAC_TERMINAL_STREAMING		0x101
-#define UAC_TERMINAL_VENDOR_SPEC	0x1FF
-
-/* Terminal Control Selectors */
-/* 4.3.2  Class-Specific AC Interface Descriptor */
-struct uac1_ac_header_descriptor {
-	__u8  bLength;			/* 8 + n */
-	__u8  bDescriptorType;		/* USB_DT_CS_INTERFACE */
-	__u8  bDescriptorSubtype;	/* UAC_MS_HEADER */
-	__le16 bcdADC;			/* 0x0100 */
-	__le16 wTotalLength;		/* includes Unit and Terminal desc. */
-	__u8  bInCollection;		/* n */
-	__u8  baInterfaceNr[];		/* [n] */
-} __attribute__ ((packed));
-
-#define UAC_DT_AC_HEADER_SIZE(n)	(8 + (n))
-
-/* As above, but more useful for defining your own descriptors: */
-#define DECLARE_UAC_AC_HEADER_DESCRIPTOR(n)			\
-struct uac1_ac_header_descriptor_##n {			\
-	__u8  bLength;						\
-	__u8  bDescriptorType;					\
-	__u8  bDescriptorSubtype;				\
-	__le16 bcdADC;						\
-	__le16 wTotalLength;					\
-	__u8  bInCollection;					\
-	__u8  baInterfaceNr[n];					\
-} __attribute__ ((packed))
-
-/* 4.3.2.1 Input Terminal Descriptor */
-struct uac_input_terminal_descriptor {
-	__u8  bLength;			/* in bytes: 12 */
-	__u8  bDescriptorType;		/* CS_INTERFACE descriptor type */
-	__u8  bDescriptorSubtype;	/* INPUT_TERMINAL descriptor subtype */
-	__u8  bTerminalID;		/* Constant uniquely terminal ID */
-	__le16 wTerminalType;		/* USB Audio Terminal Types */
-	__u8  bAssocTerminal;		/* ID of the Output Terminal associated */
-	__u8  bNrChannels;		/* Number of logical output channels */
-	__le16 wChannelConfig;
-	__u8  iChannelNames;
-	__u8  iTerminal;
-} __attribute__ ((packed));
-
-#define UAC_DT_INPUT_TERMINAL_SIZE			12
-
-/* Terminals - 2.2 Input Terminal Types */
-#define UAC_INPUT_TERMINAL_UNDEFINED			0x200
-#define UAC_INPUT_TERMINAL_MICROPHONE			0x201
-#define UAC_INPUT_TERMINAL_DESKTOP_MICROPHONE		0x202
-#define UAC_INPUT_TERMINAL_PERSONAL_MICROPHONE		0x203
-#define UAC_INPUT_TERMINAL_OMNI_DIR_MICROPHONE		0x204
-#define UAC_INPUT_TERMINAL_MICROPHONE_ARRAY		0x205
-#define UAC_INPUT_TERMINAL_PROC_MICROPHONE_ARRAY	0x206
-
-/* Terminals - control selectors */
-
-#define UAC_TERMINAL_CS_COPY_PROTECT_CONTROL		0x01
-
-/* 4.3.2.2 Output Terminal Descriptor */
-struct uac1_output_terminal_descriptor {
-	__u8  bLength;			/* in bytes: 9 */
-	__u8  bDescriptorType;		/* CS_INTERFACE descriptor type */
-	__u8  bDescriptorSubtype;	/* OUTPUT_TERMINAL descriptor subtype */
-	__u8  bTerminalID;		/* Constant uniquely terminal ID */
-	__le16 wTerminalType;		/* USB Audio Terminal Types */
-	__u8  bAssocTerminal;		/* ID of the Input Terminal associated */
-	__u8  bSourceID;		/* ID of the connected Unit or Terminal*/
-	__u8  iTerminal;
-} __attribute__ ((packed));
-
-#define UAC_DT_OUTPUT_TERMINAL_SIZE			9
-
-/* Terminals - 2.3 Output Terminal Types */
-#define UAC_OUTPUT_TERMINAL_UNDEFINED			0x300
-#define UAC_OUTPUT_TERMINAL_SPEAKER			0x301
-#define UAC_OUTPUT_TERMINAL_HEADPHONES			0x302
-#define UAC_OUTPUT_TERMINAL_HEAD_MOUNTED_DISPLAY_AUDIO	0x303
-#define UAC_OUTPUT_TERMINAL_DESKTOP_SPEAKER		0x304
-#define UAC_OUTPUT_TERMINAL_ROOM_SPEAKER		0x305
-#define UAC_OUTPUT_TERMINAL_COMMUNICATION_SPEAKER	0x306
-#define UAC_OUTPUT_TERMINAL_LOW_FREQ_EFFECTS_SPEAKER	0x307
-
-/* Set bControlSize = 2 as default setting */
-#define UAC_DT_FEATURE_UNIT_SIZE(ch)		(7 + ((ch) + 1) * 2)
-
-/* As above, but more useful for defining your own descriptors: */
-#define DECLARE_UAC_FEATURE_UNIT_DESCRIPTOR(ch)			\
-struct uac_feature_unit_descriptor_##ch {			\
-	__u8  bLength;						\
-	__u8  bDescriptorType;					\
-	__u8  bDescriptorSubtype;				\
-	__u8  bUnitID;						\
-	__u8  bSourceID;					\
-	__u8  bControlSize;					\
-	__le16 bmaControls[ch + 1];				\
-	__u8  iFeature;						\
-} __attribute__ ((packed))
-
-/* 4.3.2.3 Mixer Unit Descriptor */
-struct uac_mixer_unit_descriptor {
-	__u8 bLength;
-	__u8 bDescriptorType;
-	__u8 bDescriptorSubtype;
-	__u8 bUnitID;
-	__u8 bNrInPins;
-	__u8 baSourceID[];
-} __attribute__ ((packed));
-
-static inline __u8 uac_mixer_unit_bNrChannels(struct uac_mixer_unit_descriptor *desc)
-{
-	return desc->baSourceID[desc->bNrInPins];
-}
-
-static inline __u32 uac_mixer_unit_wChannelConfig(struct uac_mixer_unit_descriptor *desc,
-						  int protocol)
-{
-	if (protocol == UAC_VERSION_1)
-		return (desc->baSourceID[desc->bNrInPins + 2] << 8) |
-			desc->baSourceID[desc->bNrInPins + 1];
-	else
-		return  (desc->baSourceID[desc->bNrInPins + 4] << 24) |
-			(desc->baSourceID[desc->bNrInPins + 3] << 16) |
-			(desc->baSourceID[desc->bNrInPins + 2] << 8)  |
-			(desc->baSourceID[desc->bNrInPins + 1]);
-}
-
-static inline __u8 uac_mixer_unit_iChannelNames(struct uac_mixer_unit_descriptor *desc,
-						int protocol)
-{
-	return (protocol == UAC_VERSION_1) ?
-		desc->baSourceID[desc->bNrInPins + 3] :
-		desc->baSourceID[desc->bNrInPins + 5];
-}
-
-static inline __u8 *uac_mixer_unit_bmControls(struct uac_mixer_unit_descriptor *desc,
-					      int protocol)
-{
-	return (protocol == UAC_VERSION_1) ?
-		&desc->baSourceID[desc->bNrInPins + 4] :
-		&desc->baSourceID[desc->bNrInPins + 6];
-}
-
-static inline __u8 uac_mixer_unit_iMixer(struct uac_mixer_unit_descriptor *desc)
-{
-	__u8 *raw = (__u8 *) desc;
-	return raw[desc->bLength - 1];
-}
-
-/* 4.3.2.4 Selector Unit Descriptor */
-struct uac_selector_unit_descriptor {
-	__u8 bLength;
-	__u8 bDescriptorType;
-	__u8 bDescriptorSubtype;
-	__u8 bUintID;
-	__u8 bNrInPins;
-	__u8 baSourceID[];
-} __attribute__ ((packed));
-
-static inline __u8 uac_selector_unit_iSelector(struct uac_selector_unit_descriptor *desc)
-{
-	__u8 *raw = (__u8 *) desc;
-	return raw[desc->bLength - 1];
-}
-
-/* 4.3.2.5 Feature Unit Descriptor */
-struct uac_feature_unit_descriptor {
-	__u8 bLength;
-	__u8 bDescriptorType;
-	__u8 bDescriptorSubtype;
-	__u8 bUnitID;
-	__u8 bSourceID;
-	__u8 bControlSize;
-	__u8 bmaControls[0]; /* variable length */
-} __attribute__((packed));
-
-static inline __u8 uac_feature_unit_iFeature(struct uac_feature_unit_descriptor *desc)
-{
-	__u8 *raw = (__u8 *) desc;
-	return raw[desc->bLength - 1];
-}
-
-/* 4.3.2.6 Processing Unit Descriptors */
-struct uac_processing_unit_descriptor {
-	__u8 bLength;
-	__u8 bDescriptorType;
-	__u8 bDescriptorSubtype;
-	__u8 bUnitID;
-	__u16 wProcessType;
-	__u8 bNrInPins;
-	__u8 baSourceID[];
-} __attribute__ ((packed));
-
-static inline __u8 uac_processing_unit_bNrChannels(struct uac_processing_unit_descriptor *desc)
-{
-	return desc->baSourceID[desc->bNrInPins];
-}
-
-static inline __u32 uac_processing_unit_wChannelConfig(struct uac_processing_unit_descriptor *desc,
-						       int protocol)
-{
-	if (protocol == UAC_VERSION_1)
-		return (desc->baSourceID[desc->bNrInPins + 2] << 8) |
-			desc->baSourceID[desc->bNrInPins + 1];
-	else
-		return  (desc->baSourceID[desc->bNrInPins + 4] << 24) |
-			(desc->baSourceID[desc->bNrInPins + 3] << 16) |
-			(desc->baSourceID[desc->bNrInPins + 2] << 8)  |
-			(desc->baSourceID[desc->bNrInPins + 1]);
-}
-
-static inline __u8 uac_processing_unit_iChannelNames(struct uac_processing_unit_descriptor *desc,
-						     int protocol)
-{
-	return (protocol == UAC_VERSION_1) ?
-		desc->baSourceID[desc->bNrInPins + 3] :
-		desc->baSourceID[desc->bNrInPins + 5];
-}
-
-static inline __u8 uac_processing_unit_bControlSize(struct uac_processing_unit_descriptor *desc,
-						    int protocol)
-{
-	return (protocol == UAC_VERSION_1) ?
-		desc->baSourceID[desc->bNrInPins + 4] :
-		desc->baSourceID[desc->bNrInPins + 6];
-}
-
-static inline __u8 *uac_processing_unit_bmControls(struct uac_processing_unit_descriptor *desc,
-						   int protocol)
-{
-	return (protocol == UAC_VERSION_1) ?
-		&desc->baSourceID[desc->bNrInPins + 5] :
-		&desc->baSourceID[desc->bNrInPins + 7];
-}
-
-static inline __u8 uac_processing_unit_iProcessing(struct uac_processing_unit_descriptor *desc,
-						   int protocol)
-{
-	__u8 control_size = uac_processing_unit_bControlSize(desc, protocol);
-	return desc->baSourceID[desc->bNrInPins + control_size];
-}
-
-static inline __u8 *uac_processing_unit_specific(struct uac_processing_unit_descriptor *desc,
-						 int protocol)
-{
-	__u8 control_size = uac_processing_unit_bControlSize(desc, protocol);
-	return &desc->baSourceID[desc->bNrInPins + control_size + 1];
-}
-
-/* 4.5.2 Class-Specific AS Interface Descriptor */
-struct uac1_as_header_descriptor {
-	__u8  bLength;			/* in bytes: 7 */
-	__u8  bDescriptorType;		/* USB_DT_CS_INTERFACE */
-	__u8  bDescriptorSubtype;	/* AS_GENERAL */
-	__u8  bTerminalLink;		/* Terminal ID of connected Terminal */
-	__u8  bDelay;			/* Delay introduced by the data path */
-	__le16 wFormatTag;		/* The Audio Data Format */
-} __attribute__ ((packed));
-
-#define UAC_DT_AS_HEADER_SIZE		7
-
-/* Formats - A.1.1 Audio Data Format Type I Codes */
-#define UAC_FORMAT_TYPE_I_UNDEFINED	0x0
-#define UAC_FORMAT_TYPE_I_PCM		0x1
-#define UAC_FORMAT_TYPE_I_PCM8		0x2
-#define UAC_FORMAT_TYPE_I_IEEE_FLOAT	0x3
-#define UAC_FORMAT_TYPE_I_ALAW		0x4
-#define UAC_FORMAT_TYPE_I_MULAW		0x5
-
-struct uac_format_type_i_continuous_descriptor {
-	__u8  bLength;			/* in bytes: 8 + (ns * 3) */
-	__u8  bDescriptorType;		/* USB_DT_CS_INTERFACE */
-	__u8  bDescriptorSubtype;	/* FORMAT_TYPE */
-	__u8  bFormatType;		/* FORMAT_TYPE_1 */
-	__u8  bNrChannels;		/* physical channels in the stream */
-	__u8  bSubframeSize;		/* */
-	__u8  bBitResolution;
-	__u8  bSamFreqType;
-	__u8  tLowerSamFreq[3];
-	__u8  tUpperSamFreq[3];
-} __attribute__ ((packed));
-
-#define UAC_FORMAT_TYPE_I_CONTINUOUS_DESC_SIZE	14
-
-struct uac_format_type_i_discrete_descriptor {
-	__u8  bLength;			/* in bytes: 8 + (ns * 3) */
-	__u8  bDescriptorType;		/* USB_DT_CS_INTERFACE */
-	__u8  bDescriptorSubtype;	/* FORMAT_TYPE */
-	__u8  bFormatType;		/* FORMAT_TYPE_1 */
-	__u8  bNrChannels;		/* physical channels in the stream */
-	__u8  bSubframeSize;		/* */
-	__u8  bBitResolution;
-	__u8  bSamFreqType;
-	__u8  tSamFreq[][3];
-} __attribute__ ((packed));
-
-#define DECLARE_UAC_FORMAT_TYPE_I_DISCRETE_DESC(n)		\
-struct uac_format_type_i_discrete_descriptor_##n {		\
-	__u8  bLength;						\
-	__u8  bDescriptorType;					\
-	__u8  bDescriptorSubtype;				\
-	__u8  bFormatType;					\
-	__u8  bNrChannels;					\
-	__u8  bSubframeSize;					\
-	__u8  bBitResolution;					\
-	__u8  bSamFreqType;					\
-	__u8  tSamFreq[n][3];					\
-} __attribute__ ((packed))
-
-#define UAC_FORMAT_TYPE_I_DISCRETE_DESC_SIZE(n)	(8 + (n * 3))
-
-struct uac_format_type_i_ext_descriptor {
-	__u8 bLength;
-	__u8 bDescriptorType;
-	__u8 bDescriptorSubtype;
-	__u8 bFormatType;
-	__u8 bSubslotSize;
-	__u8 bBitResolution;
-	__u8 bHeaderLength;
-	__u8 bControlSize;
-	__u8 bSideBandProtocol;
-} __attribute__((packed));
-
-/* Formats - Audio Data Format Type I Codes */
-
-#define UAC_FORMAT_TYPE_II_MPEG	0x1001
-#define UAC_FORMAT_TYPE_II_AC3	0x1002
-
-struct uac_format_type_ii_discrete_descriptor {
-	__u8 bLength;
-	__u8 bDescriptorType;
-	__u8 bDescriptorSubtype;
-	__u8 bFormatType;
-	__le16 wMaxBitRate;
-	__le16 wSamplesPerFrame;
-	__u8 bSamFreqType;
-	__u8 tSamFreq[][3];
-} __attribute__((packed));
-
-struct uac_format_type_ii_ext_descriptor {
-	__u8 bLength;
-	__u8 bDescriptorType;
-	__u8 bDescriptorSubtype;
-	__u8 bFormatType;
-	__u16 wMaxBitRate;
-	__u16 wSamplesPerFrame;
-	__u8 bHeaderLength;
-	__u8 bSideBandProtocol;
-} __attribute__((packed));
-
-/* type III */
-#define UAC_FORMAT_TYPE_III_IEC1937_AC3	0x2001
-#define UAC_FORMAT_TYPE_III_IEC1937_MPEG1_LAYER1	0x2002
-#define UAC_FORMAT_TYPE_III_IEC1937_MPEG2_NOEXT	0x2003
-#define UAC_FORMAT_TYPE_III_IEC1937_MPEG2_EXT	0x2004
-#define UAC_FORMAT_TYPE_III_IEC1937_MPEG2_LAYER1_LS	0x2005
-#define UAC_FORMAT_TYPE_III_IEC1937_MPEG2_LAYER23_LS	0x2006
-
-/* Formats - A.2 Format Type Codes */
-#define UAC_FORMAT_TYPE_UNDEFINED	0x0
-#define UAC_FORMAT_TYPE_I		0x1
-#define UAC_FORMAT_TYPE_II		0x2
-#define UAC_FORMAT_TYPE_III		0x3
-#define UAC_EXT_FORMAT_TYPE_I		0x81
-#define UAC_EXT_FORMAT_TYPE_II		0x82
-#define UAC_EXT_FORMAT_TYPE_III		0x83
-
-struct uac_iso_endpoint_descriptor {
-	__u8  bLength;			/* in bytes: 7 */
-	__u8  bDescriptorType;		/* USB_DT_CS_ENDPOINT */
-	__u8  bDescriptorSubtype;	/* EP_GENERAL */
-	__u8  bmAttributes;
-	__u8  bLockDelayUnits;
-	__le16 wLockDelay;
-} __attribute__((packed));
-#define UAC_ISO_ENDPOINT_DESC_SIZE	7
-
-#define UAC_EP_CS_ATTR_SAMPLE_RATE	0x01
-#define UAC_EP_CS_ATTR_PITCH_CONTROL	0x02
-#define UAC_EP_CS_ATTR_FILL_MAX		0x80
-
-/* status word format (3.7.1.1) */
-
-#define UAC1_STATUS_TYPE_ORIG_MASK		0x0f
-#define UAC1_STATUS_TYPE_ORIG_AUDIO_CONTROL_IF	0x0
-#define UAC1_STATUS_TYPE_ORIG_AUDIO_STREAM_IF	0x1
-#define UAC1_STATUS_TYPE_ORIG_AUDIO_STREAM_EP	0x2
-
-#define UAC1_STATUS_TYPE_IRQ_PENDING		(1 << 7)
-#define UAC1_STATUS_TYPE_MEM_CHANGED		(1 << 6)
-
-struct uac1_status_word {
-	__u8 bStatusType;
-	__u8 bOriginator;
-} __attribute__((packed));
-
-#ifdef __KERNEL__
-
-struct usb_audio_control {
-	struct list_head list;
-	const char *name;
-	u8 type;
-	int data[5];
-	int (*set)(struct usb_audio_control *con, u8 cmd, int value);
-	int (*get)(struct usb_audio_control *con, u8 cmd);
-};
-
-struct usb_audio_control_selector {
-	struct list_head list;
-	struct list_head control;
-	u8 id;
-	const char *name;
-	u8 type;
-	struct usb_descriptor_header *desc;
-};
-
-#endif /* __KERNEL__ */
-
-#endif /* __LINUX_USB_AUDIO_H */
diff --git a/ANDROID_3.4.5/include/linux/usb/c67x00.h b/ANDROID_3.4.5/include/linux/usb/c67x00.h
deleted file mode 100644
index 83c6b454..00000000
--- a/ANDROID_3.4.5/include/linux/usb/c67x00.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * usb_c67x00.h: platform definitions for the Cypress C67X00 USB chip
- *
- * Copyright (C) 2006-2008 Barco N.V.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA  02110-1301  USA.
- */
-
-#ifndef _LINUX_USB_C67X00_H
-#define _LINUX_USB_C67X00_H
-
-/* SIE configuration */
-#define C67X00_SIE_UNUSED	0
-#define C67X00_SIE_HOST		1
-#define C67X00_SIE_PERIPHERAL_A	2	/* peripheral on A port */
-#define C67X00_SIE_PERIPHERAL_B	3	/* peripheral on B port */
-
-#define c67x00_sie_config(config, n)  (((config)>>(4*(n)))&0x3)
-
-#define C67X00_SIE1_UNUSED	        (C67X00_SIE_UNUSED		<< 0)
-#define C67X00_SIE1_HOST	        (C67X00_SIE_HOST		<< 0)
-#define C67X00_SIE1_PERIPHERAL_A	(C67X00_SIE_PERIPHERAL_A	<< 0)
-#define C67X00_SIE1_PERIPHERAL_B	(C67X00_SIE_PERIPHERAL_B	<< 0)
-
-#define C67X00_SIE2_UNUSED		(C67X00_SIE_UNUSED		<< 4)
-#define C67X00_SIE2_HOST		(C67X00_SIE_HOST		<< 4)
-#define C67X00_SIE2_PERIPHERAL_A	(C67X00_SIE_PERIPHERAL_A	<< 4)
-#define C67X00_SIE2_PERIPHERAL_B	(C67X00_SIE_PERIPHERAL_B	<< 4)
-
-struct c67x00_platform_data {
-	int sie_config;			/* SIEs config (C67X00_SIEx_*) */
-	unsigned long hpi_regstep;	/* Step between HPI registers  */
-};
-
-#endif /* _LINUX_USB_C67X00_H */
diff --git a/ANDROID_3.4.5/include/linux/usb/cdc-wdm.h b/ANDROID_3.4.5/include/linux/usb/cdc-wdm.h
deleted file mode 100644
index 719c3326..00000000
--- a/ANDROID_3.4.5/include/linux/usb/cdc-wdm.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * USB CDC Device Management subdriver
- *
- * Copyright (c) 2012  Bjørn Mork <bjorn@mork.no>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- */
-
-#ifndef __LINUX_USB_CDC_WDM_H
-#define __LINUX_USB_CDC_WDM_H
-
-extern struct usb_driver *usb_cdc_wdm_register(struct usb_interface *intf,
-					struct usb_endpoint_descriptor *ep,
-					int bufsize,
-					int (*manage_power)(struct usb_interface *, int));
-
-#endif /* __LINUX_USB_CDC_WDM_H */
diff --git a/ANDROID_3.4.5/include/linux/usb/cdc.h b/ANDROID_3.4.5/include/linux/usb/cdc.h
deleted file mode 100644
index 81a92793..00000000
--- a/ANDROID_3.4.5/include/linux/usb/cdc.h
+++ /dev/null
@@ -1,412 +0,0 @@
-/*
- * USB Communications Device Class (CDC) definitions
- *
- * CDC says how to talk to lots of different types of network adapters,
- * notably ethernet adapters and various modems.  It's used mostly with
- * firmware based USB peripherals.
- */
-
-#ifndef __LINUX_USB_CDC_H
-#define __LINUX_USB_CDC_H
-
-#include <linux/types.h>
-
-#define USB_CDC_SUBCLASS_ACM			0x02
-#define USB_CDC_SUBCLASS_ETHERNET		0x06
-#define USB_CDC_SUBCLASS_WHCM			0x08
-#define USB_CDC_SUBCLASS_DMM			0x09
-#define USB_CDC_SUBCLASS_MDLM			0x0a
-#define USB_CDC_SUBCLASS_OBEX			0x0b
-#define USB_CDC_SUBCLASS_EEM			0x0c
-#define USB_CDC_SUBCLASS_NCM			0x0d
-
-#define USB_CDC_PROTO_NONE			0
-
-#define USB_CDC_ACM_PROTO_AT_V25TER		1
-#define USB_CDC_ACM_PROTO_AT_PCCA101		2
-#define USB_CDC_ACM_PROTO_AT_PCCA101_WAKE	3
-#define USB_CDC_ACM_PROTO_AT_GSM		4
-#define USB_CDC_ACM_PROTO_AT_3G			5
-#define USB_CDC_ACM_PROTO_AT_CDMA		6
-#define USB_CDC_ACM_PROTO_VENDOR		0xff
-
-#define USB_CDC_PROTO_EEM			7
-
-#define USB_CDC_NCM_PROTO_NTB			1
-
-/*-------------------------------------------------------------------------*/
-
-/*
- * Class-Specific descriptors ... there are a couple dozen of them
- */
-
-#define USB_CDC_HEADER_TYPE		0x00	/* header_desc */
-#define USB_CDC_CALL_MANAGEMENT_TYPE	0x01	/* call_mgmt_descriptor */
-#define USB_CDC_ACM_TYPE		0x02	/* acm_descriptor */
-#define USB_CDC_UNION_TYPE		0x06	/* union_desc */
-#define USB_CDC_COUNTRY_TYPE		0x07
-#define USB_CDC_NETWORK_TERMINAL_TYPE	0x0a	/* network_terminal_desc */
-#define USB_CDC_ETHERNET_TYPE		0x0f	/* ether_desc */
-#define USB_CDC_WHCM_TYPE		0x11
-#define USB_CDC_MDLM_TYPE		0x12	/* mdlm_desc */
-#define USB_CDC_MDLM_DETAIL_TYPE	0x13	/* mdlm_detail_desc */
-#define USB_CDC_DMM_TYPE		0x14
-#define USB_CDC_OBEX_TYPE		0x15
-#define USB_CDC_NCM_TYPE		0x1a
-
-/* "Header Functional Descriptor" from CDC spec  5.2.3.1 */
-struct usb_cdc_header_desc {
-	__u8	bLength;
-	__u8	bDescriptorType;
-	__u8	bDescriptorSubType;
-
-	__le16	bcdCDC;
-} __attribute__ ((packed));
-
-/* "Call Management Descriptor" from CDC spec  5.2.3.2 */
-struct usb_cdc_call_mgmt_descriptor {
-	__u8	bLength;
-	__u8	bDescriptorType;
-	__u8	bDescriptorSubType;
-
-	__u8	bmCapabilities;
-#define USB_CDC_CALL_MGMT_CAP_CALL_MGMT		0x01
-#define USB_CDC_CALL_MGMT_CAP_DATA_INTF		0x02
-
-	__u8	bDataInterface;
-} __attribute__ ((packed));
-
-/* "Abstract Control Management Descriptor" from CDC spec  5.2.3.3 */
-struct usb_cdc_acm_descriptor {
-	__u8	bLength;
-	__u8	bDescriptorType;
-	__u8	bDescriptorSubType;
-
-	__u8	bmCapabilities;
-} __attribute__ ((packed));
-
-/* capabilities from 5.2.3.3 */
-
-#define USB_CDC_COMM_FEATURE	0x01
-#define USB_CDC_CAP_LINE	0x02
-#define USB_CDC_CAP_BRK		0x04
-#define USB_CDC_CAP_NOTIFY	0x08
-
-/* "Union Functional Descriptor" from CDC spec 5.2.3.8 */
-struct usb_cdc_union_desc {
-	__u8	bLength;
-	__u8	bDescriptorType;
-	__u8	bDescriptorSubType;
-
-	__u8	bMasterInterface0;
-	__u8	bSlaveInterface0;
-	/* ... and there could be other slave interfaces */
-} __attribute__ ((packed));
-
-/* "Country Selection Functional Descriptor" from CDC spec 5.2.3.9 */
-struct usb_cdc_country_functional_desc {
-	__u8	bLength;
-	__u8	bDescriptorType;
-	__u8	bDescriptorSubType;
-
-	__u8	iCountryCodeRelDate;
-	__le16	wCountyCode0;
-	/* ... and there can be a lot of country codes */
-} __attribute__ ((packed));
-
-/* "Network Channel Terminal Functional Descriptor" from CDC spec 5.2.3.11 */
-struct usb_cdc_network_terminal_desc {
-	__u8	bLength;
-	__u8	bDescriptorType;
-	__u8	bDescriptorSubType;
-
-	__u8	bEntityId;
-	__u8	iName;
-	__u8	bChannelIndex;
-	__u8	bPhysicalInterface;
-} __attribute__ ((packed));
-
-/* "Ethernet Networking Functional Descriptor" from CDC spec 5.2.3.16 */
-struct usb_cdc_ether_desc {
-	__u8	bLength;
-	__u8	bDescriptorType;
-	__u8	bDescriptorSubType;
-
-	__u8	iMACAddress;
-	__le32	bmEthernetStatistics;
-	__le16	wMaxSegmentSize;
-	__le16	wNumberMCFilters;
-	__u8	bNumberPowerFilters;
-} __attribute__ ((packed));
-
-/* "Telephone Control Model Functional Descriptor" from CDC WMC spec 6.3..3 */
-struct usb_cdc_dmm_desc {
-	__u8	bFunctionLength;
-	__u8	bDescriptorType;
-	__u8	bDescriptorSubtype;
-	__u16	bcdVersion;
-	__le16	wMaxCommand;
-} __attribute__ ((packed));
-
-/* "MDLM Functional Descriptor" from CDC WMC spec 6.7.2.3 */
-struct usb_cdc_mdlm_desc {
-	__u8	bLength;
-	__u8	bDescriptorType;
-	__u8	bDescriptorSubType;
-
-	__le16	bcdVersion;
-	__u8	bGUID[16];
-} __attribute__ ((packed));
-
-/* "MDLM Detail Functional Descriptor" from CDC WMC spec 6.7.2.4 */
-struct usb_cdc_mdlm_detail_desc {
-	__u8	bLength;
-	__u8	bDescriptorType;
-	__u8	bDescriptorSubType;
-
-	/* type is associated with mdlm_desc.bGUID */
-	__u8	bGuidDescriptorType;
-	__u8	bDetailData[0];
-} __attribute__ ((packed));
-
-/* "OBEX Control Model Functional Descriptor" */
-struct usb_cdc_obex_desc {
-	__u8	bLength;
-	__u8	bDescriptorType;
-	__u8	bDescriptorSubType;
-
-	__le16	bcdVersion;
-} __attribute__ ((packed));
-
-/* "NCM Control Model Functional Descriptor" */
-struct usb_cdc_ncm_desc {
-	__u8	bLength;
-	__u8	bDescriptorType;
-	__u8	bDescriptorSubType;
-
-	__le16	bcdNcmVersion;
-	__u8	bmNetworkCapabilities;
-} __attribute__ ((packed));
-/*-------------------------------------------------------------------------*/
-
-/*
- * Class-Specific Control Requests (6.2)
- *
- * section 3.6.2.1 table 4 has the ACM profile, for modems.
- * section 3.8.2 table 10 has the ethernet profile.
- *
- * Microsoft's RNDIS stack for Ethernet is a vendor-specific CDC ACM variant,
- * heavily dependent on the encapsulated (proprietary) command mechanism.
- */
-
-#define USB_CDC_SEND_ENCAPSULATED_COMMAND	0x00
-#define USB_CDC_GET_ENCAPSULATED_RESPONSE	0x01
-#define USB_CDC_REQ_SET_LINE_CODING		0x20
-#define USB_CDC_REQ_GET_LINE_CODING		0x21
-#define USB_CDC_REQ_SET_CONTROL_LINE_STATE	0x22
-#define USB_CDC_REQ_SEND_BREAK			0x23
-#define USB_CDC_SET_ETHERNET_MULTICAST_FILTERS	0x40
-#define USB_CDC_SET_ETHERNET_PM_PATTERN_FILTER	0x41
-#define USB_CDC_GET_ETHERNET_PM_PATTERN_FILTER	0x42
-#define USB_CDC_SET_ETHERNET_PACKET_FILTER	0x43
-#define USB_CDC_GET_ETHERNET_STATISTIC		0x44
-#define USB_CDC_GET_NTB_PARAMETERS		0x80
-#define USB_CDC_GET_NET_ADDRESS			0x81
-#define USB_CDC_SET_NET_ADDRESS			0x82
-#define USB_CDC_GET_NTB_FORMAT			0x83
-#define USB_CDC_SET_NTB_FORMAT			0x84
-#define USB_CDC_GET_NTB_INPUT_SIZE		0x85
-#define USB_CDC_SET_NTB_INPUT_SIZE		0x86
-#define USB_CDC_GET_MAX_DATAGRAM_SIZE		0x87
-#define USB_CDC_SET_MAX_DATAGRAM_SIZE		0x88
-#define USB_CDC_GET_CRC_MODE			0x89
-#define USB_CDC_SET_CRC_MODE			0x8a
-
-/* Line Coding Structure from CDC spec 6.2.13 */
-struct usb_cdc_line_coding {
-	__le32	dwDTERate;
-	__u8	bCharFormat;
-#define USB_CDC_1_STOP_BITS			0
-#define USB_CDC_1_5_STOP_BITS			1
-#define USB_CDC_2_STOP_BITS			2
-
-	__u8	bParityType;
-#define USB_CDC_NO_PARITY			0
-#define USB_CDC_ODD_PARITY			1
-#define USB_CDC_EVEN_PARITY			2
-#define USB_CDC_MARK_PARITY			3
-#define USB_CDC_SPACE_PARITY			4
-
-	__u8	bDataBits;
-} __attribute__ ((packed));
-
-/* table 62; bits in multicast filter */
-#define	USB_CDC_PACKET_TYPE_PROMISCUOUS		(1 << 0)
-#define	USB_CDC_PACKET_TYPE_ALL_MULTICAST	(1 << 1) /* no filter */
-#define	USB_CDC_PACKET_TYPE_DIRECTED		(1 << 2)
-#define	USB_CDC_PACKET_TYPE_BROADCAST		(1 << 3)
-#define	USB_CDC_PACKET_TYPE_MULTICAST		(1 << 4) /* filtered */
-
-
-/*-------------------------------------------------------------------------*/
-
-/*
- * Class-Specific Notifications (6.3) sent by interrupt transfers
- *
- * section 3.8.2 table 11 of the CDC spec lists Ethernet notifications
- * section 3.6.2.1 table 5 specifies ACM notifications, accepted by RNDIS
- * RNDIS also defines its own bit-incompatible notifications
- */
-
-#define USB_CDC_NOTIFY_NETWORK_CONNECTION	0x00
-#define USB_CDC_NOTIFY_RESPONSE_AVAILABLE	0x01
-#define USB_CDC_NOTIFY_SERIAL_STATE		0x20
-#define USB_CDC_NOTIFY_SPEED_CHANGE		0x2a
-
-struct usb_cdc_notification {
-	__u8	bmRequestType;
-	__u8	bNotificationType;
-	__le16	wValue;
-	__le16	wIndex;
-	__le16	wLength;
-} __attribute__ ((packed));
-
-struct usb_cdc_speed_change {
-	__le32	DLBitRRate;	/* contains the downlink bit rate (IN pipe) */
-	__le32	ULBitRate;	/* contains the uplink bit rate (OUT pipe) */
-} __attribute__ ((packed));
-
-/*-------------------------------------------------------------------------*/
-
-/*
- * Class Specific structures and constants
- *
- * CDC NCM NTB parameters structure, CDC NCM subclass 6.2.1
- *
- */
-
-struct usb_cdc_ncm_ntb_parameters {
-	__le16	wLength;
-	__le16	bmNtbFormatsSupported;
-	__le32	dwNtbInMaxSize;
-	__le16	wNdpInDivisor;
-	__le16	wNdpInPayloadRemainder;
-	__le16	wNdpInAlignment;
-	__le16	wPadding1;
-	__le32	dwNtbOutMaxSize;
-	__le16	wNdpOutDivisor;
-	__le16	wNdpOutPayloadRemainder;
-	__le16	wNdpOutAlignment;
-	__le16	wNtbOutMaxDatagrams;
-} __attribute__ ((packed));
-
-/*
- * CDC NCM transfer headers, CDC NCM subclass 3.2
- */
-
-#define USB_CDC_NCM_NTH16_SIGN		0x484D434E /* NCMH */
-#define USB_CDC_NCM_NTH32_SIGN		0x686D636E /* ncmh */
-
-struct usb_cdc_ncm_nth16 {
-	__le32	dwSignature;
-	__le16	wHeaderLength;
-	__le16	wSequence;
-	__le16	wBlockLength;
-	__le16	wNdpIndex;
-} __attribute__ ((packed));
-
-struct usb_cdc_ncm_nth32 {
-	__le32	dwSignature;
-	__le16	wHeaderLength;
-	__le16	wSequence;
-	__le32	dwBlockLength;
-	__le32	dwNdpIndex;
-} __attribute__ ((packed));
-
-/*
- * CDC NCM datagram pointers, CDC NCM subclass 3.3
- */
-
-#define USB_CDC_NCM_NDP16_CRC_SIGN	0x314D434E /* NCM1 */
-#define USB_CDC_NCM_NDP16_NOCRC_SIGN	0x304D434E /* NCM0 */
-#define USB_CDC_NCM_NDP32_CRC_SIGN	0x316D636E /* ncm1 */
-#define USB_CDC_NCM_NDP32_NOCRC_SIGN	0x306D636E /* ncm0 */
-
-/* 16-bit NCM Datagram Pointer Entry */
-struct usb_cdc_ncm_dpe16 {
-	__le16	wDatagramIndex;
-	__le16	wDatagramLength;
-} __attribute__((__packed__));
-
-/* 16-bit NCM Datagram Pointer Table */
-struct usb_cdc_ncm_ndp16 {
-	__le32	dwSignature;
-	__le16	wLength;
-	__le16	wNextNdpIndex;
-	struct	usb_cdc_ncm_dpe16 dpe16[0];
-} __attribute__ ((packed));
-
-/* 32-bit NCM Datagram Pointer Entry */
-struct usb_cdc_ncm_dpe32 {
-	__le32	dwDatagramIndex;
-	__le32	dwDatagramLength;
-} __attribute__((__packed__));
-
-/* 32-bit NCM Datagram Pointer Table */
-struct usb_cdc_ncm_ndp32 {
-	__le32	dwSignature;
-	__le16	wLength;
-	__le16	wReserved6;
-	__le32	dwNextNdpIndex;
-	__le32	dwReserved12;
-	struct	usb_cdc_ncm_dpe32 dpe32[0];
-} __attribute__ ((packed));
-
-/* CDC NCM subclass 3.2.1 and 3.2.2 */
-#define USB_CDC_NCM_NDP16_INDEX_MIN			0x000C
-#define USB_CDC_NCM_NDP32_INDEX_MIN			0x0010
-
-/* CDC NCM subclass 3.3.3 Datagram Formatting */
-#define USB_CDC_NCM_DATAGRAM_FORMAT_CRC			0x30
-#define USB_CDC_NCM_DATAGRAM_FORMAT_NOCRC		0X31
-
-/* CDC NCM subclass 4.2 NCM Communications Interface Protocol Code */
-#define USB_CDC_NCM_PROTO_CODE_NO_ENCAP_COMMANDS	0x00
-#define USB_CDC_NCM_PROTO_CODE_EXTERN_PROTO		0xFE
-
-/* CDC NCM subclass 5.2.1 NCM Functional Descriptor, bmNetworkCapabilities */
-#define USB_CDC_NCM_NCAP_ETH_FILTER			(1 << 0)
-#define USB_CDC_NCM_NCAP_NET_ADDRESS			(1 << 1)
-#define USB_CDC_NCM_NCAP_ENCAP_COMMAND			(1 << 2)
-#define USB_CDC_NCM_NCAP_MAX_DATAGRAM_SIZE		(1 << 3)
-#define USB_CDC_NCM_NCAP_CRC_MODE			(1 << 4)
-#define	USB_CDC_NCM_NCAP_NTB_INPUT_SIZE			(1 << 5)
-
-/* CDC NCM subclass Table 6-3: NTB Parameter Structure */
-#define USB_CDC_NCM_NTB16_SUPPORTED			(1 << 0)
-#define USB_CDC_NCM_NTB32_SUPPORTED			(1 << 1)
-
-/* CDC NCM subclass Table 6-3: NTB Parameter Structure */
-#define USB_CDC_NCM_NDP_ALIGN_MIN_SIZE			0x04
-#define USB_CDC_NCM_NTB_MAX_LENGTH			0x1C
-
-/* CDC NCM subclass 6.2.5 SetNtbFormat */
-#define USB_CDC_NCM_NTB16_FORMAT			0x00
-#define USB_CDC_NCM_NTB32_FORMAT			0x01
-
-/* CDC NCM subclass 6.2.7 SetNtbInputSize */
-#define USB_CDC_NCM_NTB_MIN_IN_SIZE			2048
-#define USB_CDC_NCM_NTB_MIN_OUT_SIZE			2048
-
-/* NTB Input Size Structure */
-struct usb_cdc_ncm_ndp_input_size {
-	__le32	dwNtbInMaxSize;
-	__le16	wNtbInMaxDatagrams;
-	__le16	wReserved;
-} __attribute__ ((packed));
-
-/* CDC NCM subclass 6.2.11 SetCrcMode */
-#define USB_CDC_NCM_CRC_NOT_APPENDED			0x00
-#define USB_CDC_NCM_CRC_APPENDED			0x01
-
-#endif /* __LINUX_USB_CDC_H */
diff --git a/ANDROID_3.4.5/include/linux/usb/ch11.h b/ANDROID_3.4.5/include/linux/usb/ch11.h
deleted file mode 100644
index f1d26b60..00000000
--- a/ANDROID_3.4.5/include/linux/usb/ch11.h
+++ /dev/null
@@ -1,264 +0,0 @@
-/*
- * This file holds Hub protocol constants and data structures that are
- * defined in chapter 11 (Hub Specification) of the USB 2.0 specification.
- *
- * It is used/shared between the USB core, the HCDs and couple of other USB
- * drivers.
- */
-
-#ifndef __LINUX_CH11_H
-#define __LINUX_CH11_H
-
-#include <linux/types.h>	/* __u8 etc */
-
-/*
- * Hub request types
- */
-
-#define USB_RT_HUB	(USB_TYPE_CLASS | USB_RECIP_DEVICE)
-#define USB_RT_PORT	(USB_TYPE_CLASS | USB_RECIP_OTHER)
-
-/*
- * Hub class requests
- * See USB 2.0 spec Table 11-16
- */
-#define HUB_CLEAR_TT_BUFFER	8
-#define HUB_RESET_TT		9
-#define HUB_GET_TT_STATE	10
-#define HUB_STOP_TT		11
-
-/*
- * Hub class additional requests defined by USB 3.0 spec
- * See USB 3.0 spec Table 10-6
- */
-#define HUB_SET_DEPTH		12
-#define HUB_GET_PORT_ERR_COUNT	13
-
-/*
- * Hub Class feature numbers
- * See USB 2.0 spec Table 11-17
- */
-#define C_HUB_LOCAL_POWER	0
-#define C_HUB_OVER_CURRENT	1
-
-/*
- * Port feature numbers
- * See USB 2.0 spec Table 11-17
- */
-#define USB_PORT_FEAT_CONNECTION	0
-#define USB_PORT_FEAT_ENABLE		1
-#define USB_PORT_FEAT_SUSPEND		2	/* L2 suspend */
-#define USB_PORT_FEAT_OVER_CURRENT	3
-#define USB_PORT_FEAT_RESET		4
-#define USB_PORT_FEAT_L1		5	/* L1 suspend */
-#define USB_PORT_FEAT_POWER		8
-#define USB_PORT_FEAT_LOWSPEED		9	/* Should never be used */
-#define USB_PORT_FEAT_C_CONNECTION	16
-#define USB_PORT_FEAT_C_ENABLE		17
-#define USB_PORT_FEAT_C_SUSPEND		18
-#define USB_PORT_FEAT_C_OVER_CURRENT	19
-#define USB_PORT_FEAT_C_RESET		20
-#define USB_PORT_FEAT_TEST              21
-#define USB_PORT_FEAT_INDICATOR         22
-#define USB_PORT_FEAT_C_PORT_L1         23
-
-/*
- * Port feature selectors added by USB 3.0 spec.
- * See USB 3.0 spec Table 10-7
- */
-#define USB_PORT_FEAT_LINK_STATE		5
-#define USB_PORT_FEAT_U1_TIMEOUT		23
-#define USB_PORT_FEAT_U2_TIMEOUT		24
-#define USB_PORT_FEAT_C_PORT_LINK_STATE		25
-#define USB_PORT_FEAT_C_PORT_CONFIG_ERROR	26
-#define USB_PORT_FEAT_REMOTE_WAKE_MASK		27
-#define USB_PORT_FEAT_BH_PORT_RESET		28
-#define USB_PORT_FEAT_C_BH_PORT_RESET		29
-#define USB_PORT_FEAT_FORCE_LINKPM_ACCEPT	30
-
-/* USB 3.0 hub remote wake mask bits, see table 10-14 */
-#define USB_PORT_FEAT_REMOTE_WAKE_CONNECT	(1 << 8)
-#define USB_PORT_FEAT_REMOTE_WAKE_DISCONNECT	(1 << 9)
-#define USB_PORT_FEAT_REMOTE_WAKE_OVER_CURRENT	(1 << 10)
-
-/*
- * Hub Status and Hub Change results
- * See USB 2.0 spec Table 11-19 and Table 11-20
- */
-struct usb_port_status {
-	__le16 wPortStatus;
-	__le16 wPortChange;
-} __attribute__ ((packed));
-
-/*
- * wPortStatus bit field
- * See USB 2.0 spec Table 11-21
- */
-#define USB_PORT_STAT_CONNECTION	0x0001
-#define USB_PORT_STAT_ENABLE		0x0002
-#define USB_PORT_STAT_SUSPEND		0x0004
-#define USB_PORT_STAT_OVERCURRENT	0x0008
-#define USB_PORT_STAT_RESET		0x0010
-#define USB_PORT_STAT_L1		0x0020
-/* bits 6 to 7 are reserved */
-#define USB_PORT_STAT_POWER		0x0100
-#define USB_PORT_STAT_LOW_SPEED		0x0200
-#define USB_PORT_STAT_HIGH_SPEED        0x0400
-#define USB_PORT_STAT_TEST              0x0800
-#define USB_PORT_STAT_INDICATOR         0x1000
-/* bits 13 to 15 are reserved */
-
-/*
- * Additions to wPortStatus bit field from USB 3.0
- * See USB 3.0 spec Table 10-10
- */
-#define USB_PORT_STAT_LINK_STATE	0x01e0
-#define USB_SS_PORT_STAT_POWER		0x0200
-#define USB_SS_PORT_STAT_SPEED		0x1c00
-#define USB_PORT_STAT_SPEED_5GBPS	0x0000
-/* Valid only if port is enabled */
-/* Bits that are the same from USB 2.0 */
-#define USB_SS_PORT_STAT_MASK (USB_PORT_STAT_CONNECTION |	    \
-				USB_PORT_STAT_ENABLE |	    \
-				USB_PORT_STAT_OVERCURRENT | \
-				USB_PORT_STAT_RESET)
-
-/*
- * Definitions for PORT_LINK_STATE values
- * (bits 5-8) in wPortStatus
- */
-#define USB_SS_PORT_LS_U0		0x0000
-#define USB_SS_PORT_LS_U1		0x0020
-#define USB_SS_PORT_LS_U2		0x0040
-#define USB_SS_PORT_LS_U3		0x0060
-#define USB_SS_PORT_LS_SS_DISABLED	0x0080
-#define USB_SS_PORT_LS_RX_DETECT	0x00a0
-#define USB_SS_PORT_LS_SS_INACTIVE	0x00c0
-#define USB_SS_PORT_LS_POLLING		0x00e0
-#define USB_SS_PORT_LS_RECOVERY		0x0100
-#define USB_SS_PORT_LS_HOT_RESET	0x0120
-#define USB_SS_PORT_LS_COMP_MOD		0x0140
-#define USB_SS_PORT_LS_LOOPBACK		0x0160
-
-/*
- * wPortChange bit field
- * See USB 2.0 spec Table 11-22 and USB 2.0 LPM ECN Table-4.10
- * Bits 0 to 5 shown, bits 6 to 15 are reserved
- */
-#define USB_PORT_STAT_C_CONNECTION	0x0001
-#define USB_PORT_STAT_C_ENABLE		0x0002
-#define USB_PORT_STAT_C_SUSPEND		0x0004
-#define USB_PORT_STAT_C_OVERCURRENT	0x0008
-#define USB_PORT_STAT_C_RESET		0x0010
-#define USB_PORT_STAT_C_L1		0x0020
-/*
- * USB 3.0 wPortChange bit fields
- * See USB 3.0 spec Table 10-11
- */
-#define USB_PORT_STAT_C_BH_RESET	0x0020
-#define USB_PORT_STAT_C_LINK_STATE	0x0040
-#define USB_PORT_STAT_C_CONFIG_ERROR	0x0080
-
-/*
- * wHubCharacteristics (masks)
- * See USB 2.0 spec Table 11-13, offset 3
- */
-#define HUB_CHAR_LPSM		0x0003 /* Logical Power Switching Mode mask */
-#define HUB_CHAR_COMMON_LPSM	0x0000 /* All ports power control at once */
-#define HUB_CHAR_INDV_PORT_LPSM	0x0001 /* per-port power control */
-#define HUB_CHAR_NO_LPSM	0x0002 /* no power switching */
-
-#define HUB_CHAR_COMPOUND	0x0004 /* hub is part of a compound device */
-
-#define HUB_CHAR_OCPM		0x0018 /* Over-Current Protection Mode mask */
-#define HUB_CHAR_COMMON_OCPM	0x0000 /* All ports Over-Current reporting */
-#define HUB_CHAR_INDV_PORT_OCPM	0x0008 /* per-port Over-current reporting */
-#define HUB_CHAR_NO_OCPM	0x0010 /* No Over-current Protection support */
-
-#define HUB_CHAR_TTTT		0x0060 /* TT Think Time mask */
-#define HUB_CHAR_PORTIND	0x0080 /* per-port indicators (LEDs) */
-
-struct usb_hub_status {
-	__le16 wHubStatus;
-	__le16 wHubChange;
-} __attribute__ ((packed));
-
-/*
- * Hub Status & Hub Change bit masks
- * See USB 2.0 spec Table 11-19 and Table 11-20
- * Bits 0 and 1 for wHubStatus and wHubChange
- * Bits 2 to 15 are reserved for both
- */
-#define HUB_STATUS_LOCAL_POWER	0x0001
-#define HUB_STATUS_OVERCURRENT	0x0002
-#define HUB_CHANGE_LOCAL_POWER	0x0001
-#define HUB_CHANGE_OVERCURRENT	0x0002
-
-
-/*
- * Hub descriptor
- * See USB 2.0 spec Table 11-13
- */
-
-#define USB_DT_HUB			(USB_TYPE_CLASS | 0x09)
-#define USB_DT_SS_HUB			(USB_TYPE_CLASS | 0x0a)
-#define USB_DT_HUB_NONVAR_SIZE		7
-#define USB_DT_SS_HUB_SIZE              12
-
-/*
- * Hub Device descriptor
- * USB Hub class device protocols
- */
-
-#define USB_HUB_PR_FS		0 /* Full speed hub */
-#define USB_HUB_PR_HS_NO_TT	0 /* Hi-speed hub without TT */
-#define USB_HUB_PR_HS_SINGLE_TT	1 /* Hi-speed hub with single TT */
-#define USB_HUB_PR_HS_MULTI_TT	2 /* Hi-speed hub with multiple TT */
-#define USB_HUB_PR_SS		3 /* Super speed hub */
-
-struct usb_hub_descriptor {
-	__u8  bDescLength;
-	__u8  bDescriptorType;
-	__u8  bNbrPorts;
-	__le16 wHubCharacteristics;
-	__u8  bPwrOn2PwrGood;
-	__u8  bHubContrCurrent;
-
-	/* 2.0 and 3.0 hubs differ here */
-	union {
-		struct {
-			/* add 1 bit for hub status change; round to bytes */
-			__u8  DeviceRemovable[(USB_MAXCHILDREN + 1 + 7) / 8];
-			__u8  PortPwrCtrlMask[(USB_MAXCHILDREN + 1 + 7) / 8];
-		}  __attribute__ ((packed)) hs;
-
-		struct {
-			__u8 bHubHdrDecLat;
-			__u16 wHubDelay;
-			__u16 DeviceRemovable;
-		}  __attribute__ ((packed)) ss;
-	} u;
-} __attribute__ ((packed));
-
-/* port indicator status selectors, tables 11-7 and 11-25 */
-#define HUB_LED_AUTO	0
-#define HUB_LED_AMBER	1
-#define HUB_LED_GREEN	2
-#define HUB_LED_OFF	3
-
-enum hub_led_mode {
-	INDICATOR_AUTO = 0,
-	INDICATOR_CYCLE,
-	/* software blinks for attention:  software, hardware, reserved */
-	INDICATOR_GREEN_BLINK, INDICATOR_GREEN_BLINK_OFF,
-	INDICATOR_AMBER_BLINK, INDICATOR_AMBER_BLINK_OFF,
-	INDICATOR_ALT_BLINK, INDICATOR_ALT_BLINK_OFF
-} __attribute__ ((packed));
-
-/* Transaction Translator Think Times, in bits */
-#define HUB_TTTT_8_BITS		0x00
-#define HUB_TTTT_16_BITS	0x20
-#define HUB_TTTT_24_BITS	0x40
-#define HUB_TTTT_32_BITS	0x60
-
-#endif /* __LINUX_CH11_H */
diff --git a/ANDROID_3.4.5/include/linux/usb/ch9.h b/ANDROID_3.4.5/include/linux/usb/ch9.h
deleted file mode 100644
index af21f311..00000000
--- a/ANDROID_3.4.5/include/linux/usb/ch9.h
+++ /dev/null
@@ -1,946 +0,0 @@
-/*
- * This file holds USB constants and structures that are needed for
- * USB device APIs.  These are used by the USB device model, which is
- * defined in chapter 9 of the USB 2.0 specification and in the
- * Wireless USB 1.0 (spread around).  Linux has several APIs in C that
- * need these:
- *
- * - the master/host side Linux-USB kernel driver API;
- * - the "usbfs" user space API; and
- * - the Linux "gadget" slave/device/peripheral side driver API.
- *
- * USB 2.0 adds an additional "On The Go" (OTG) mode, which lets systems
- * act either as a USB master/host or as a USB slave/device.  That means
- * the master and slave side APIs benefit from working well together.
- *
- * There's also "Wireless USB", using low power short range radios for
- * peripheral interconnection but otherwise building on the USB framework.
- *
- * Note all descriptors are declared '__attribute__((packed))' so that:
- *
- * [a] they never get padded, either internally (USB spec writers
- *     probably handled that) or externally;
- *
- * [b] so that accessing bigger-than-a-bytes fields will never
- *     generate bus errors on any platform, even when the location of
- *     its descriptor inside a bundle isn't "naturally aligned", and
- *
- * [c] for consistency, removing all doubt even when it appears to
- *     someone that the two other points are non-issues for that
- *     particular descriptor type.
- */
-
-#ifndef __LINUX_USB_CH9_H
-#define __LINUX_USB_CH9_H
-
-#include <linux/types.h>	/* __u8 etc */
-#include <asm/byteorder.h>	/* le16_to_cpu */
-
-/*-------------------------------------------------------------------------*/
-
-/* CONTROL REQUEST SUPPORT */
-
-/*
- * USB directions
- *
- * This bit flag is used in endpoint descriptors' bEndpointAddress field.
- * It's also one of three fields in control requests bRequestType.
- */
-#define USB_DIR_OUT			0		/* to device */
-#define USB_DIR_IN			0x80		/* to host */
-
-/*
- * USB types, the second of three bRequestType fields
- */
-#define USB_TYPE_MASK			(0x03 << 5)
-#define USB_TYPE_STANDARD		(0x00 << 5)
-#define USB_TYPE_CLASS			(0x01 << 5)
-#define USB_TYPE_VENDOR			(0x02 << 5)
-#define USB_TYPE_RESERVED		(0x03 << 5)
-
-/*
- * USB recipients, the third of three bRequestType fields
- */
-#define USB_RECIP_MASK			0x1f
-#define USB_RECIP_DEVICE		0x00
-#define USB_RECIP_INTERFACE		0x01
-#define USB_RECIP_ENDPOINT		0x02
-#define USB_RECIP_OTHER			0x03
-/* From Wireless USB 1.0 */
-#define USB_RECIP_PORT			0x04
-#define USB_RECIP_RPIPE		0x05
-
-/*
- * Standard requests, for the bRequest field of a SETUP packet.
- *
- * These are qualified by the bRequestType field, so that for example
- * TYPE_CLASS or TYPE_VENDOR specific feature flags could be retrieved
- * by a GET_STATUS request.
- */
-#define USB_REQ_GET_STATUS		0x00
-#define USB_REQ_CLEAR_FEATURE		0x01
-#define USB_REQ_SET_FEATURE		0x03
-#define USB_REQ_SET_ADDRESS		0x05
-#define USB_REQ_GET_DESCRIPTOR		0x06
-#define USB_REQ_SET_DESCRIPTOR		0x07
-#define USB_REQ_GET_CONFIGURATION	0x08
-#define USB_REQ_SET_CONFIGURATION	0x09
-#define USB_REQ_GET_INTERFACE		0x0A
-#define USB_REQ_SET_INTERFACE		0x0B
-#define USB_REQ_SYNCH_FRAME		0x0C
-
-#define USB_REQ_SET_ENCRYPTION		0x0D	/* Wireless USB */
-#define USB_REQ_GET_ENCRYPTION		0x0E
-#define USB_REQ_RPIPE_ABORT		0x0E
-#define USB_REQ_SET_HANDSHAKE		0x0F
-#define USB_REQ_RPIPE_RESET		0x0F
-#define USB_REQ_GET_HANDSHAKE		0x10
-#define USB_REQ_SET_CONNECTION		0x11
-#define USB_REQ_SET_SECURITY_DATA	0x12
-#define USB_REQ_GET_SECURITY_DATA	0x13
-#define USB_REQ_SET_WUSB_DATA		0x14
-#define USB_REQ_LOOPBACK_DATA_WRITE	0x15
-#define USB_REQ_LOOPBACK_DATA_READ	0x16
-#define USB_REQ_SET_INTERFACE_DS	0x17
-
-/* The Link Power Management (LPM) ECN defines USB_REQ_TEST_AND_SET command,
- * used by hubs to put ports into a new L1 suspend state, except that it
- * forgot to define its number ...
- */
-
-/*
- * USB feature flags are written using USB_REQ_{CLEAR,SET}_FEATURE, and
- * are read as a bit array returned by USB_REQ_GET_STATUS.  (So there
- * are at most sixteen features of each type.)  Hubs may also support a
- * new USB_REQ_TEST_AND_SET_FEATURE to put ports into L1 suspend.
- */
-#define USB_DEVICE_SELF_POWERED		0	/* (read only) */
-#define USB_DEVICE_REMOTE_WAKEUP	1	/* dev may initiate wakeup */
-#define USB_DEVICE_TEST_MODE		2	/* (wired high speed only) */
-#define USB_DEVICE_BATTERY		2	/* (wireless) */
-#define USB_DEVICE_B_HNP_ENABLE		3	/* (otg) dev may initiate HNP */
-#define USB_DEVICE_WUSB_DEVICE		3	/* (wireless)*/
-#define USB_DEVICE_A_HNP_SUPPORT	4	/* (otg) RH port supports HNP */
-#define USB_DEVICE_A_ALT_HNP_SUPPORT	5	/* (otg) other RH port does */
-#define USB_DEVICE_DEBUG_MODE		6	/* (special devices only) */
-
-/*
- * Test Mode Selectors
- * See USB 2.0 spec Table 9-7
- */
-#define	TEST_J		1
-#define	TEST_K		2
-#define	TEST_SE0_NAK	3
-#define	TEST_PACKET	4
-#define	TEST_FORCE_EN	5
-
-/*
- * New Feature Selectors as added by USB 3.0
- * See USB 3.0 spec Table 9-6
- */
-#define USB_DEVICE_U1_ENABLE	48	/* dev may initiate U1 transition */
-#define USB_DEVICE_U2_ENABLE	49	/* dev may initiate U2 transition */
-#define USB_DEVICE_LTM_ENABLE	50	/* dev may send LTM */
-#define USB_INTRF_FUNC_SUSPEND	0	/* function suspend */
-
-#define USB_INTR_FUNC_SUSPEND_OPT_MASK	0xFF00
-/*
- * Suspend Options, Table 9-7 USB 3.0 spec
- */
-#define USB_INTRF_FUNC_SUSPEND_LP	(1 << (8 + 0))
-#define USB_INTRF_FUNC_SUSPEND_RW	(1 << (8 + 1))
-
-#define USB_ENDPOINT_HALT		0	/* IN/OUT will STALL */
-
-/* Bit array elements as returned by the USB_REQ_GET_STATUS request. */
-#define USB_DEV_STAT_U1_ENABLED		2	/* transition into U1 state */
-#define USB_DEV_STAT_U2_ENABLED		3	/* transition into U2 state */
-#define USB_DEV_STAT_LTM_ENABLED	4	/* Latency tolerance messages */
-
-/**
- * struct usb_ctrlrequest - SETUP data for a USB device control request
- * @bRequestType: matches the USB bmRequestType field
- * @bRequest: matches the USB bRequest field
- * @wValue: matches the USB wValue field (le16 byte order)
- * @wIndex: matches the USB wIndex field (le16 byte order)
- * @wLength: matches the USB wLength field (le16 byte order)
- *
- * This structure is used to send control requests to a USB device.  It matches
- * the different fields of the USB 2.0 Spec section 9.3, table 9-2.  See the
- * USB spec for a fuller description of the different fields, and what they are
- * used for.
- *
- * Note that the driver for any interface can issue control requests.
- * For most devices, interfaces don't coordinate with each other, so
- * such requests may be made at any time.
- */
-struct usb_ctrlrequest {
-	__u8 bRequestType;
-	__u8 bRequest;
-	__le16 wValue;
-	__le16 wIndex;
-	__le16 wLength;
-} __attribute__ ((packed));
-
-/*-------------------------------------------------------------------------*/
-
-/*
- * STANDARD DESCRIPTORS ... as returned by GET_DESCRIPTOR, or
- * (rarely) accepted by SET_DESCRIPTOR.
- *
- * Note that all multi-byte values here are encoded in little endian
- * byte order "on the wire".  Within the kernel and when exposed
- * through the Linux-USB APIs, they are not converted to cpu byte
- * order; it is the responsibility of the client code to do this.
- * The single exception is when device and configuration descriptors (but
- * not other descriptors) are read from usbfs (i.e. /proc/bus/usb/BBB/DDD);
- * in this case the fields are converted to host endianness by the kernel.
- */
-
-/*
- * Descriptor types ... USB 2.0 spec table 9.5
- */
-#define USB_DT_DEVICE			0x01
-#define USB_DT_CONFIG			0x02
-#define USB_DT_STRING			0x03
-#define USB_DT_INTERFACE		0x04
-#define USB_DT_ENDPOINT			0x05
-#define USB_DT_DEVICE_QUALIFIER		0x06
-#define USB_DT_OTHER_SPEED_CONFIG	0x07
-#define USB_DT_INTERFACE_POWER		0x08
-/* these are from a minor usb 2.0 revision (ECN) */
-#define USB_DT_OTG			0x09
-#define USB_DT_DEBUG			0x0a
-#define USB_DT_INTERFACE_ASSOCIATION	0x0b
-/* these are from the Wireless USB spec */
-#define USB_DT_SECURITY			0x0c
-#define USB_DT_KEY			0x0d
-#define USB_DT_ENCRYPTION_TYPE		0x0e
-#define USB_DT_BOS			0x0f
-#define USB_DT_DEVICE_CAPABILITY	0x10
-#define USB_DT_WIRELESS_ENDPOINT_COMP	0x11
-#define USB_DT_WIRE_ADAPTER		0x21
-#define USB_DT_RPIPE			0x22
-#define USB_DT_CS_RADIO_CONTROL		0x23
-/* From the T10 UAS specification */
-#define USB_DT_PIPE_USAGE		0x24
-/* From the USB 3.0 spec */
-#define	USB_DT_SS_ENDPOINT_COMP		0x30
-
-/* Conventional codes for class-specific descriptors.  The convention is
- * defined in the USB "Common Class" Spec (3.11).  Individual class specs
- * are authoritative for their usage, not the "common class" writeup.
- */
-#define USB_DT_CS_DEVICE		(USB_TYPE_CLASS | USB_DT_DEVICE)
-#define USB_DT_CS_CONFIG		(USB_TYPE_CLASS | USB_DT_CONFIG)
-#define USB_DT_CS_STRING		(USB_TYPE_CLASS | USB_DT_STRING)
-#define USB_DT_CS_INTERFACE		(USB_TYPE_CLASS | USB_DT_INTERFACE)
-#define USB_DT_CS_ENDPOINT		(USB_TYPE_CLASS | USB_DT_ENDPOINT)
-
-/* All standard descriptors have these 2 fields at the beginning */
-struct usb_descriptor_header {
-	__u8  bLength;
-	__u8  bDescriptorType;
-} __attribute__ ((packed));
-
-
-/*-------------------------------------------------------------------------*/
-
-/* USB_DT_DEVICE: Device descriptor */
-struct usb_device_descriptor {
-	__u8  bLength;
-	__u8  bDescriptorType;
-
-	__le16 bcdUSB;
-	__u8  bDeviceClass;
-	__u8  bDeviceSubClass;
-	__u8  bDeviceProtocol;
-	__u8  bMaxPacketSize0;
-	__le16 idVendor;
-	__le16 idProduct;
-	__le16 bcdDevice;
-	__u8  iManufacturer;
-	__u8  iProduct;
-	__u8  iSerialNumber;
-	__u8  bNumConfigurations;
-} __attribute__ ((packed));
-
-#define USB_DT_DEVICE_SIZE		18
-
-
-/*
- * Device and/or Interface Class codes
- * as found in bDeviceClass or bInterfaceClass
- * and defined by www.usb.org documents
- */
-#define USB_CLASS_PER_INTERFACE		0	/* for DeviceClass */
-#define USB_CLASS_AUDIO			1
-#define USB_CLASS_COMM			2
-#define USB_CLASS_HID			3
-#define USB_CLASS_PHYSICAL		5
-#define USB_CLASS_STILL_IMAGE		6
-#define USB_CLASS_PRINTER		7
-#define USB_CLASS_MASS_STORAGE		8
-#define USB_CLASS_HUB			9
-#define USB_CLASS_CDC_DATA		0x0a
-#define USB_CLASS_CSCID			0x0b	/* chip+ smart card */
-#define USB_CLASS_CONTENT_SEC		0x0d	/* content security */
-#define USB_CLASS_VIDEO			0x0e
-#define USB_CLASS_WIRELESS_CONTROLLER	0xe0
-#define USB_CLASS_MISC			0xef
-#define USB_CLASS_APP_SPEC		0xfe
-#define USB_CLASS_VENDOR_SPEC		0xff
-
-#define USB_SUBCLASS_VENDOR_SPEC	0xff
-
-/*-------------------------------------------------------------------------*/
-
-/* USB_DT_CONFIG: Configuration descriptor information.
- *
- * USB_DT_OTHER_SPEED_CONFIG is the same descriptor, except that the
- * descriptor type is different.  Highspeed-capable devices can look
- * different depending on what speed they're currently running.  Only
- * devices with a USB_DT_DEVICE_QUALIFIER have any OTHER_SPEED_CONFIG
- * descriptors.
- */
-struct usb_config_descriptor {
-	__u8  bLength;
-	__u8  bDescriptorType;
-
-	__le16 wTotalLength;
-	__u8  bNumInterfaces;
-	__u8  bConfigurationValue;
-	__u8  iConfiguration;
-	__u8  bmAttributes;
-	__u8  bMaxPower;
-} __attribute__ ((packed));
-
-#define USB_DT_CONFIG_SIZE		9
-
-/* from config descriptor bmAttributes */
-#define USB_CONFIG_ATT_ONE		(1 << 7)	/* must be set */
-#define USB_CONFIG_ATT_SELFPOWER	(1 << 6)	/* self powered */
-#define USB_CONFIG_ATT_WAKEUP		(1 << 5)	/* can wakeup */
-#define USB_CONFIG_ATT_BATTERY		(1 << 4)	/* battery powered */
-
-/*-------------------------------------------------------------------------*/
-
-/* USB_DT_STRING: String descriptor */
-struct usb_string_descriptor {
-	__u8  bLength;
-	__u8  bDescriptorType;
-
-	__le16 wData[1];		/* UTF-16LE encoded */
-} __attribute__ ((packed));
-
-/* note that "string" zero is special, it holds language codes that
- * the device supports, not Unicode characters.
- */
-
-/*-------------------------------------------------------------------------*/
-
-/* USB_DT_INTERFACE: Interface descriptor */
-struct usb_interface_descriptor {
-	__u8  bLength;
-	__u8  bDescriptorType;
-
-	__u8  bInterfaceNumber;
-	__u8  bAlternateSetting;
-	__u8  bNumEndpoints;
-	__u8  bInterfaceClass;
-	__u8  bInterfaceSubClass;
-	__u8  bInterfaceProtocol;
-	__u8  iInterface;
-} __attribute__ ((packed));
-
-#define USB_DT_INTERFACE_SIZE		9
-
-/*-------------------------------------------------------------------------*/
-
-/* USB_DT_ENDPOINT: Endpoint descriptor */
-struct usb_endpoint_descriptor {
-	__u8  bLength;
-	__u8  bDescriptorType;
-
-	__u8  bEndpointAddress;
-	__u8  bmAttributes;
-	__le16 wMaxPacketSize;
-	__u8  bInterval;
-
-	/* NOTE:  these two are _only_ in audio endpoints. */
-	/* use USB_DT_ENDPOINT*_SIZE in bLength, not sizeof. */
-	__u8  bRefresh;
-	__u8  bSynchAddress;
-} __attribute__ ((packed));
-
-#define USB_DT_ENDPOINT_SIZE		7
-#define USB_DT_ENDPOINT_AUDIO_SIZE	9	/* Audio extension */
-
-
-/*
- * Endpoints
- */
-#define USB_ENDPOINT_NUMBER_MASK	0x0f	/* in bEndpointAddress */
-#define USB_ENDPOINT_DIR_MASK		0x80
-
-#define USB_ENDPOINT_XFERTYPE_MASK	0x03	/* in bmAttributes */
-#define USB_ENDPOINT_XFER_CONTROL	0
-#define USB_ENDPOINT_XFER_ISOC		1
-#define USB_ENDPOINT_XFER_BULK		2
-#define USB_ENDPOINT_XFER_INT		3
-#define USB_ENDPOINT_MAX_ADJUSTABLE	0x80
-
-#define USB_ENDPOINT_SYNCTYPE		0x0c
-#define USB_ENDPOINT_SYNC_NONE		(0 << 2)
-#define USB_ENDPOINT_SYNC_ASYNC		(1 << 2)
-#define USB_ENDPOINT_SYNC_ADAPTIVE	(2 << 2)
-#define USB_ENDPOINT_SYNC_SYNC		(3 << 2)
-
-#define USB_ENDPOINT_USAGE_MASK		0x30
-#define USB_ENDPOINT_USAGE_DATA		0x00
-#define USB_ENDPOINT_USAGE_FEEDBACK	0x10
-#define USB_ENDPOINT_USAGE_IMPLICIT_FB	0x20	/* Implicit feedback Data endpoint */
-
-/*-------------------------------------------------------------------------*/
-
-/**
- * usb_endpoint_num - get the endpoint's number
- * @epd: endpoint to be checked
- *
- * Returns @epd's number: 0 to 15.
- */
-static inline int usb_endpoint_num(const struct usb_endpoint_descriptor *epd)
-{
-	return epd->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK;
-}
-
-/**
- * usb_endpoint_type - get the endpoint's transfer type
- * @epd: endpoint to be checked
- *
- * Returns one of USB_ENDPOINT_XFER_{CONTROL, ISOC, BULK, INT} according
- * to @epd's transfer type.
- */
-static inline int usb_endpoint_type(const struct usb_endpoint_descriptor *epd)
-{
-	return epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK;
-}
-
-/**
- * usb_endpoint_dir_in - check if the endpoint has IN direction
- * @epd: endpoint to be checked
- *
- * Returns true if the endpoint is of type IN, otherwise it returns false.
- */
-static inline int usb_endpoint_dir_in(const struct usb_endpoint_descriptor *epd)
-{
-	return ((epd->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN);
-}
-
-/**
- * usb_endpoint_dir_out - check if the endpoint has OUT direction
- * @epd: endpoint to be checked
- *
- * Returns true if the endpoint is of type OUT, otherwise it returns false.
- */
-static inline int usb_endpoint_dir_out(
-				const struct usb_endpoint_descriptor *epd)
-{
-	return ((epd->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT);
-}
-
-/**
- * usb_endpoint_xfer_bulk - check if the endpoint has bulk transfer type
- * @epd: endpoint to be checked
- *
- * Returns true if the endpoint is of type bulk, otherwise it returns false.
- */
-static inline int usb_endpoint_xfer_bulk(
-				const struct usb_endpoint_descriptor *epd)
-{
-	return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) ==
-		USB_ENDPOINT_XFER_BULK);
-}
-
-/**
- * usb_endpoint_xfer_control - check if the endpoint has control transfer type
- * @epd: endpoint to be checked
- *
- * Returns true if the endpoint is of type control, otherwise it returns false.
- */
-static inline int usb_endpoint_xfer_control(
-				const struct usb_endpoint_descriptor *epd)
-{
-	return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) ==
-		USB_ENDPOINT_XFER_CONTROL);
-}
-
-/**
- * usb_endpoint_xfer_int - check if the endpoint has interrupt transfer type
- * @epd: endpoint to be checked
- *
- * Returns true if the endpoint is of type interrupt, otherwise it returns
- * false.
- */
-static inline int usb_endpoint_xfer_int(
-				const struct usb_endpoint_descriptor *epd)
-{
-	return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) ==
-		USB_ENDPOINT_XFER_INT);
-}
-
-/**
- * usb_endpoint_xfer_isoc - check if the endpoint has isochronous transfer type
- * @epd: endpoint to be checked
- *
- * Returns true if the endpoint is of type isochronous, otherwise it returns
- * false.
- */
-static inline int usb_endpoint_xfer_isoc(
-				const struct usb_endpoint_descriptor *epd)
-{
-	return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) ==
-		USB_ENDPOINT_XFER_ISOC);
-}
-
-/**
- * usb_endpoint_is_bulk_in - check if the endpoint is bulk IN
- * @epd: endpoint to be checked
- *
- * Returns true if the endpoint has bulk transfer type and IN direction,
- * otherwise it returns false.
- */
-static inline int usb_endpoint_is_bulk_in(
-				const struct usb_endpoint_descriptor *epd)
-{
-	return usb_endpoint_xfer_bulk(epd) && usb_endpoint_dir_in(epd);
-}
-
-/**
- * usb_endpoint_is_bulk_out - check if the endpoint is bulk OUT
- * @epd: endpoint to be checked
- *
- * Returns true if the endpoint has bulk transfer type and OUT direction,
- * otherwise it returns false.
- */
-static inline int usb_endpoint_is_bulk_out(
-				const struct usb_endpoint_descriptor *epd)
-{
-	return usb_endpoint_xfer_bulk(epd) && usb_endpoint_dir_out(epd);
-}
-
-/**
- * usb_endpoint_is_int_in - check if the endpoint is interrupt IN
- * @epd: endpoint to be checked
- *
- * Returns true if the endpoint has interrupt transfer type and IN direction,
- * otherwise it returns false.
- */
-static inline int usb_endpoint_is_int_in(
-				const struct usb_endpoint_descriptor *epd)
-{
-	return usb_endpoint_xfer_int(epd) && usb_endpoint_dir_in(epd);
-}
-
-/**
- * usb_endpoint_is_int_out - check if the endpoint is interrupt OUT
- * @epd: endpoint to be checked
- *
- * Returns true if the endpoint has interrupt transfer type and OUT direction,
- * otherwise it returns false.
- */
-static inline int usb_endpoint_is_int_out(
-				const struct usb_endpoint_descriptor *epd)
-{
-	return usb_endpoint_xfer_int(epd) && usb_endpoint_dir_out(epd);
-}
-
-/**
- * usb_endpoint_is_isoc_in - check if the endpoint is isochronous IN
- * @epd: endpoint to be checked
- *
- * Returns true if the endpoint has isochronous transfer type and IN direction,
- * otherwise it returns false.
- */
-static inline int usb_endpoint_is_isoc_in(
-				const struct usb_endpoint_descriptor *epd)
-{
-	return usb_endpoint_xfer_isoc(epd) && usb_endpoint_dir_in(epd);
-}
-
-/**
- * usb_endpoint_is_isoc_out - check if the endpoint is isochronous OUT
- * @epd: endpoint to be checked
- *
- * Returns true if the endpoint has isochronous transfer type and OUT direction,
- * otherwise it returns false.
- */
-static inline int usb_endpoint_is_isoc_out(
-				const struct usb_endpoint_descriptor *epd)
-{
-	return usb_endpoint_xfer_isoc(epd) && usb_endpoint_dir_out(epd);
-}
-
-/**
- * usb_endpoint_maxp - get endpoint's max packet size
- * @epd: endpoint to be checked
- *
- * Returns @epd's max packet
- */
-static inline int usb_endpoint_maxp(const struct usb_endpoint_descriptor *epd)
-{
-	return __le16_to_cpu(epd->wMaxPacketSize);
-}
-
-/*-------------------------------------------------------------------------*/
-
-/* USB_DT_SS_ENDPOINT_COMP: SuperSpeed Endpoint Companion descriptor */
-struct usb_ss_ep_comp_descriptor {
-	__u8  bLength;
-	__u8  bDescriptorType;
-
-	__u8  bMaxBurst;
-	__u8  bmAttributes;
-	__le16 wBytesPerInterval;
-} __attribute__ ((packed));
-
-#define USB_DT_SS_EP_COMP_SIZE		6
-
-/* Bits 4:0 of bmAttributes if this is a bulk endpoint */
-static inline int
-usb_ss_max_streams(const struct usb_ss_ep_comp_descriptor *comp)
-{
-	int		max_streams;
-
-	if (!comp)
-		return 0;
-
-	max_streams = comp->bmAttributes & 0x1f;
-
-	if (!max_streams)
-		return 0;
-
-	max_streams = 1 << max_streams;
-
-	return max_streams;
-}
-
-/* Bits 1:0 of bmAttributes if this is an isoc endpoint */
-#define USB_SS_MULT(p)			(1 + ((p) & 0x3))
-
-/*-------------------------------------------------------------------------*/
-
-/* USB_DT_DEVICE_QUALIFIER: Device Qualifier descriptor */
-struct usb_qualifier_descriptor {
-	__u8  bLength;
-	__u8  bDescriptorType;
-
-	__le16 bcdUSB;
-	__u8  bDeviceClass;
-	__u8  bDeviceSubClass;
-	__u8  bDeviceProtocol;
-	__u8  bMaxPacketSize0;
-	__u8  bNumConfigurations;
-	__u8  bRESERVED;
-} __attribute__ ((packed));
-
-
-/*-------------------------------------------------------------------------*/
-
-/* USB_DT_OTG (from OTG 1.0a supplement) */
-struct usb_otg_descriptor {
-	__u8  bLength;
-	__u8  bDescriptorType;
-
-	__u8  bmAttributes;	/* support for HNP, SRP, etc */
-} __attribute__ ((packed));
-
-/* from usb_otg_descriptor.bmAttributes */
-#define USB_OTG_SRP		(1 << 0)
-#define USB_OTG_HNP		(1 << 1)	/* swap host/device roles */
-
-/*-------------------------------------------------------------------------*/
-
-/* USB_DT_DEBUG:  for special highspeed devices, replacing serial console */
-struct usb_debug_descriptor {
-	__u8  bLength;
-	__u8  bDescriptorType;
-
-	/* bulk endpoints with 8 byte maxpacket */
-	__u8  bDebugInEndpoint;
-	__u8  bDebugOutEndpoint;
-} __attribute__((packed));
-
-/*-------------------------------------------------------------------------*/
-
-/* USB_DT_INTERFACE_ASSOCIATION: groups interfaces */
-struct usb_interface_assoc_descriptor {
-	__u8  bLength;
-	__u8  bDescriptorType;
-
-	__u8  bFirstInterface;
-	__u8  bInterfaceCount;
-	__u8  bFunctionClass;
-	__u8  bFunctionSubClass;
-	__u8  bFunctionProtocol;
-	__u8  iFunction;
-} __attribute__ ((packed));
-
-
-/*-------------------------------------------------------------------------*/
-
-/* USB_DT_SECURITY:  group of wireless security descriptors, including
- * encryption types available for setting up a CC/association.
- */
-struct usb_security_descriptor {
-	__u8  bLength;
-	__u8  bDescriptorType;
-
-	__le16 wTotalLength;
-	__u8  bNumEncryptionTypes;
-} __attribute__((packed));
-
-/*-------------------------------------------------------------------------*/
-
-/* USB_DT_KEY:  used with {GET,SET}_SECURITY_DATA; only public keys
- * may be retrieved.
- */
-struct usb_key_descriptor {
-	__u8  bLength;
-	__u8  bDescriptorType;
-
-	__u8  tTKID[3];
-	__u8  bReserved;
-	__u8  bKeyData[0];
-} __attribute__((packed));
-
-/*-------------------------------------------------------------------------*/
-
-/* USB_DT_ENCRYPTION_TYPE:  bundled in DT_SECURITY groups */
-struct usb_encryption_descriptor {
-	__u8  bLength;
-	__u8  bDescriptorType;
-
-	__u8  bEncryptionType;
-#define	USB_ENC_TYPE_UNSECURE		0
-#define	USB_ENC_TYPE_WIRED		1	/* non-wireless mode */
-#define	USB_ENC_TYPE_CCM_1		2	/* aes128/cbc session */
-#define	USB_ENC_TYPE_RSA_1		3	/* rsa3072/sha1 auth */
-	__u8  bEncryptionValue;		/* use in SET_ENCRYPTION */
-	__u8  bAuthKeyIndex;
-} __attribute__((packed));
-
-
-/*-------------------------------------------------------------------------*/
-
-/* USB_DT_BOS:  group of device-level capabilities */
-struct usb_bos_descriptor {
-	__u8  bLength;
-	__u8  bDescriptorType;
-
-	__le16 wTotalLength;
-	__u8  bNumDeviceCaps;
-} __attribute__((packed));
-
-#define USB_DT_BOS_SIZE		5
-/*-------------------------------------------------------------------------*/
-
-/* USB_DT_DEVICE_CAPABILITY:  grouped with BOS */
-struct usb_dev_cap_header {
-	__u8  bLength;
-	__u8  bDescriptorType;
-	__u8  bDevCapabilityType;
-} __attribute__((packed));
-
-#define	USB_CAP_TYPE_WIRELESS_USB	1
-
-struct usb_wireless_cap_descriptor {	/* Ultra Wide Band */
-	__u8  bLength;
-	__u8  bDescriptorType;
-	__u8  bDevCapabilityType;
-
-	__u8  bmAttributes;
-#define	USB_WIRELESS_P2P_DRD		(1 << 1)
-#define	USB_WIRELESS_BEACON_MASK	(3 << 2)
-#define	USB_WIRELESS_BEACON_SELF	(1 << 2)
-#define	USB_WIRELESS_BEACON_DIRECTED	(2 << 2)
-#define	USB_WIRELESS_BEACON_NONE	(3 << 2)
-	__le16 wPHYRates;	/* bit rates, Mbps */
-#define	USB_WIRELESS_PHY_53		(1 << 0)	/* always set */
-#define	USB_WIRELESS_PHY_80		(1 << 1)
-#define	USB_WIRELESS_PHY_107		(1 << 2)	/* always set */
-#define	USB_WIRELESS_PHY_160		(1 << 3)
-#define	USB_WIRELESS_PHY_200		(1 << 4)	/* always set */
-#define	USB_WIRELESS_PHY_320		(1 << 5)
-#define	USB_WIRELESS_PHY_400		(1 << 6)
-#define	USB_WIRELESS_PHY_480		(1 << 7)
-	__u8  bmTFITXPowerInfo;	/* TFI power levels */
-	__u8  bmFFITXPowerInfo;	/* FFI power levels */
-	__le16 bmBandGroup;
-	__u8  bReserved;
-} __attribute__((packed));
-
-/* USB 2.0 Extension descriptor */
-#define	USB_CAP_TYPE_EXT		2
-
-struct usb_ext_cap_descriptor {		/* Link Power Management */
-	__u8  bLength;
-	__u8  bDescriptorType;
-	__u8  bDevCapabilityType;
-	__le32 bmAttributes;
-#define USB_LPM_SUPPORT			(1 << 1)	/* supports LPM */
-#define USB_BESL_SUPPORT		(1 << 2)	/* supports BESL */
-#define USB_BESL_BASELINE_VALID		(1 << 3)	/* Baseline BESL valid*/
-#define USB_BESL_DEEP_VALID		(1 << 4)	/* Deep BESL valid */
-#define USB_GET_BESL_BASELINE(p)	(((p) & (0xf << 8)) >> 8)
-#define USB_GET_BESL_DEEP(p)		(((p) & (0xf << 12)) >> 12)
-} __attribute__((packed));
-
-#define USB_DT_USB_EXT_CAP_SIZE	7
-
-/*
- * SuperSpeed USB Capability descriptor: Defines the set of SuperSpeed USB
- * specific device level capabilities
- */
-#define		USB_SS_CAP_TYPE		3
-struct usb_ss_cap_descriptor {		/* Link Power Management */
-	__u8  bLength;
-	__u8  bDescriptorType;
-	__u8  bDevCapabilityType;
-	__u8  bmAttributes;
-#define USB_LTM_SUPPORT			(1 << 1) /* supports LTM */
-	__le16 wSpeedSupported;
-#define USB_LOW_SPEED_OPERATION		(1)	 /* Low speed operation */
-#define USB_FULL_SPEED_OPERATION	(1 << 1) /* Full speed operation */
-#define USB_HIGH_SPEED_OPERATION	(1 << 2) /* High speed operation */
-#define USB_5GBPS_OPERATION		(1 << 3) /* Operation at 5Gbps */
-	__u8  bFunctionalitySupport;
-	__u8  bU1devExitLat;
-	__le16 bU2DevExitLat;
-} __attribute__((packed));
-
-#define USB_DT_USB_SS_CAP_SIZE	10
-
-/*
- * Container ID Capability descriptor: Defines the instance unique ID used to
- * identify the instance across all operating modes
- */
-#define	CONTAINER_ID_TYPE	4
-struct usb_ss_container_id_descriptor {
-	__u8  bLength;
-	__u8  bDescriptorType;
-	__u8  bDevCapabilityType;
-	__u8  bReserved;
-	__u8  ContainerID[16]; /* 128-bit number */
-} __attribute__((packed));
-
-#define USB_DT_USB_SS_CONTN_ID_SIZE	20
-/*-------------------------------------------------------------------------*/
-
-/* USB_DT_WIRELESS_ENDPOINT_COMP:  companion descriptor associated with
- * each endpoint descriptor for a wireless device
- */
-struct usb_wireless_ep_comp_descriptor {
-	__u8  bLength;
-	__u8  bDescriptorType;
-
-	__u8  bMaxBurst;
-	__u8  bMaxSequence;
-	__le16 wMaxStreamDelay;
-	__le16 wOverTheAirPacketSize;
-	__u8  bOverTheAirInterval;
-	__u8  bmCompAttributes;
-#define USB_ENDPOINT_SWITCH_MASK	0x03	/* in bmCompAttributes */
-#define USB_ENDPOINT_SWITCH_NO		0
-#define USB_ENDPOINT_SWITCH_SWITCH	1
-#define USB_ENDPOINT_SWITCH_SCALE	2
-} __attribute__((packed));
-
-/*-------------------------------------------------------------------------*/
-
-/* USB_REQ_SET_HANDSHAKE is a four-way handshake used between a wireless
- * host and a device for connection set up, mutual authentication, and
- * exchanging short lived session keys.  The handshake depends on a CC.
- */
-struct usb_handshake {
-	__u8 bMessageNumber;
-	__u8 bStatus;
-	__u8 tTKID[3];
-	__u8 bReserved;
-	__u8 CDID[16];
-	__u8 nonce[16];
-	__u8 MIC[8];
-} __attribute__((packed));
-
-/*-------------------------------------------------------------------------*/
-
-/* USB_REQ_SET_CONNECTION modifies or revokes a connection context (CC).
- * A CC may also be set up using non-wireless secure channels (including
- * wired USB!), and some devices may support CCs with multiple hosts.
- */
-struct usb_connection_context {
-	__u8 CHID[16];		/* persistent host id */
-	__u8 CDID[16];		/* device id (unique w/in host context) */
-	__u8 CK[16];		/* connection key */
-} __attribute__((packed));
-
-/*-------------------------------------------------------------------------*/
-
-/* USB 2.0 defines three speeds, here's how Linux identifies them */
-
-enum usb_device_speed {
-	USB_SPEED_UNKNOWN = 0,			/* enumerating */
-	USB_SPEED_LOW, USB_SPEED_FULL,		/* usb 1.1 */
-	USB_SPEED_HIGH,				/* usb 2.0 */
-	USB_SPEED_WIRELESS,			/* wireless (usb 2.5) */
-	USB_SPEED_SUPER,			/* usb 3.0 */
-};
-
-#ifdef __KERNEL__
-
-/**
- * usb_speed_string() - Returns human readable-name of the speed.
- * @speed: The speed to return human-readable name for.  If it's not
- *   any of the speeds defined in usb_device_speed enum, string for
- *   USB_SPEED_UNKNOWN will be returned.
- */
-extern const char *usb_speed_string(enum usb_device_speed speed);
-
-#endif
-
-enum usb_device_state {
-	/* NOTATTACHED isn't in the USB spec, and this state acts
-	 * the same as ATTACHED ... but it's clearer this way.
-	 */
-	USB_STATE_NOTATTACHED = 0,
-
-	/* chapter 9 and authentication (wireless) device states */
-	USB_STATE_ATTACHED,
-	USB_STATE_POWERED,			/* wired */
-	USB_STATE_RECONNECTING,			/* auth */
-	USB_STATE_UNAUTHENTICATED,		/* auth */
-	USB_STATE_DEFAULT,			/* limited function */
-	USB_STATE_ADDRESS,
-	USB_STATE_CONFIGURED,			/* most functions */
-
-	USB_STATE_SUSPENDED
-
-	/* NOTE:  there are actually four different SUSPENDED
-	 * states, returning to POWERED, DEFAULT, ADDRESS, or
-	 * CONFIGURED respectively when SOF tokens flow again.
-	 * At this level there's no difference between L1 and L2
-	 * suspend states.  (L2 being original USB 1.1 suspend.)
-	 */
-};
-
-/*-------------------------------------------------------------------------*/
-
-/*
- * As per USB compliance update, a device that is actively drawing
- * more than 100mA from USB must report itself as bus-powered in
- * the GetStatus(DEVICE) call.
- * http://compliance.usb.org/index.asp?UpdateFile=Electrical&Format=Standard#34
- */
-#define USB_SELF_POWER_VBUS_MAX_DRAW		100
-
-#endif /* __LINUX_USB_CH9_H */
diff --git a/ANDROID_3.4.5/include/linux/usb/composite.h b/ANDROID_3.4.5/include/linux/usb/composite.h
deleted file mode 100644
index 6938a860..00000000
--- a/ANDROID_3.4.5/include/linux/usb/composite.h
+++ /dev/null
@@ -1,388 +0,0 @@
-/*
- * composite.h -- framework for usb gadgets which are composite devices
- *
- * Copyright (C) 2006-2008 David Brownell
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-
-#ifndef	__LINUX_USB_COMPOSITE_H
-#define	__LINUX_USB_COMPOSITE_H
-
-/*
- * This framework is an optional layer on top of the USB Gadget interface,
- * making it easier to build (a) Composite devices, supporting multiple
- * functions within any single configuration, and (b) Multi-configuration
- * devices, also supporting multiple functions but without necessarily
- * having more than one function per configuration.
- *
- * Example:  a device with a single configuration supporting both network
- * link and mass storage functions is a composite device.  Those functions
- * might alternatively be packaged in individual configurations, but in
- * the composite model the host can use both functions at the same time.
- */
-
-#include <linux/usb/ch9.h>
-#include <linux/usb/gadget.h>
-
-/*
- * USB function drivers should return USB_GADGET_DELAYED_STATUS if they
- * wish to delay the data/status stages of the control transfer till they
- * are ready. The control transfer will then be kept from completing till
- * all the function drivers that requested for USB_GADGET_DELAYED_STAUS
- * invoke usb_composite_setup_continue().
- */
-#define USB_GADGET_DELAYED_STATUS       0x7fff	/* Impossibly large value */
-
-struct usb_configuration;
-
-/**
- * struct usb_function - describes one function of a configuration
- * @name: For diagnostics, identifies the function.
- * @strings: tables of strings, keyed by identifiers assigned during bind()
- *	and by language IDs provided in control requests
- * @descriptors: Table of full (or low) speed descriptors, using interface and
- *	string identifiers assigned during @bind().  If this pointer is null,
- *	the function will not be available at full speed (or at low speed).
- * @hs_descriptors: Table of high speed descriptors, using interface and
- *	string identifiers assigned during @bind().  If this pointer is null,
- *	the function will not be available at high speed.
- * @ss_descriptors: Table of super speed descriptors, using interface and
- *	string identifiers assigned during @bind(). If this
- *	pointer is null after initiation, the function will not
- *	be available at super speed.
- * @config: assigned when @usb_add_function() is called; this is the
- *	configuration with which this function is associated.
- * @bind: Before the gadget can register, all of its functions bind() to the
- *	available resources including string and interface identifiers used
- *	in interface or class descriptors; endpoints; I/O buffers; and so on.
- * @unbind: Reverses @bind; called as a side effect of unregistering the
- *	driver which added this function.
- * @set_alt: (REQUIRED) Reconfigures altsettings; function drivers may
- *	initialize usb_ep.driver data at this time (when it is used).
- *	Note that setting an interface to its current altsetting resets
- *	interface state, and that all interfaces have a disabled state.
- * @get_alt: Returns the active altsetting.  If this is not provided,
- *	then only altsetting zero is supported.
- * @disable: (REQUIRED) Indicates the function should be disabled.  Reasons
- *	include host resetting or reconfiguring the gadget, and disconnection.
- * @setup: Used for interface-specific control requests.
- * @suspend: Notifies functions when the host stops sending USB traffic.
- * @resume: Notifies functions when the host restarts USB traffic.
- * @get_status: Returns function status as a reply to
- *	GetStatus() request when the recepient is Interface.
- * @func_suspend: callback to be called when
- *	SetFeature(FUNCTION_SUSPEND) is reseived
- *
- * A single USB function uses one or more interfaces, and should in most
- * cases support operation at both full and high speeds.  Each function is
- * associated by @usb_add_function() with a one configuration; that function
- * causes @bind() to be called so resources can be allocated as part of
- * setting up a gadget driver.  Those resources include endpoints, which
- * should be allocated using @usb_ep_autoconfig().
- *
- * To support dual speed operation, a function driver provides descriptors
- * for both high and full speed operation.  Except in rare cases that don't
- * involve bulk endpoints, each speed needs different endpoint descriptors.
- *
- * Function drivers choose their own strategies for managing instance data.
- * The simplest strategy just declares it "static', which means the function
- * can only be activated once.  If the function needs to be exposed in more
- * than one configuration at a given speed, it needs to support multiple
- * usb_function structures (one for each configuration).
- *
- * A more complex strategy might encapsulate a @usb_function structure inside
- * a driver-specific instance structure to allows multiple activations.  An
- * example of multiple activations might be a CDC ACM function that supports
- * two or more distinct instances within the same configuration, providing
- * several independent logical data links to a USB host.
- */
-struct usb_function {
-	const char			*name;
-	struct usb_gadget_strings	**strings;
-	struct usb_descriptor_header	**descriptors;
-	struct usb_descriptor_header	**hs_descriptors;
-	struct usb_descriptor_header	**ss_descriptors;
-
-	struct usb_configuration	*config;
-
-	/* REVISIT:  bind() functions can be marked __init, which
-	 * makes trouble for section mismatch analysis.  See if
-	 * we can't restructure things to avoid mismatching.
-	 * Related:  unbind() may kfree() but bind() won't...
-	 */
-
-	/* configuration management:  bind/unbind */
-	int			(*bind)(struct usb_configuration *,
-					struct usb_function *);
-	void			(*unbind)(struct usb_configuration *,
-					struct usb_function *);
-
-	/* runtime state management */
-	int			(*set_alt)(struct usb_function *,
-					unsigned interface, unsigned alt);
-	int			(*get_alt)(struct usb_function *,
-					unsigned interface);
-	void			(*disable)(struct usb_function *);
-	int			(*setup)(struct usb_function *,
-					const struct usb_ctrlrequest *);
-	void			(*suspend)(struct usb_function *);
-	void			(*resume)(struct usb_function *);
-
-	/* USB 3.0 additions */
-	int			(*get_status)(struct usb_function *);
-	int			(*func_suspend)(struct usb_function *,
-						u8 suspend_opt);
-	/* private: */
-	/* internals */
-	struct list_head		list;
-	DECLARE_BITMAP(endpoints, 32);
-};
-
-int usb_add_function(struct usb_configuration *, struct usb_function *);
-
-int usb_function_deactivate(struct usb_function *);
-int usb_function_activate(struct usb_function *);
-
-int usb_interface_id(struct usb_configuration *, struct usb_function *);
-
-int config_ep_by_speed(struct usb_gadget *g, struct usb_function *f,
-			struct usb_ep *_ep);
-
-#define	MAX_CONFIG_INTERFACES		16	/* arbitrary; max 255 */
-
-/**
- * struct usb_configuration - represents one gadget configuration
- * @label: For diagnostics, describes the configuration.
- * @strings: Tables of strings, keyed by identifiers assigned during @bind()
- *	and by language IDs provided in control requests.
- * @descriptors: Table of descriptors preceding all function descriptors.
- *	Examples include OTG and vendor-specific descriptors.
- * @unbind: Reverses @bind; called as a side effect of unregistering the
- *	driver which added this configuration.
- * @setup: Used to delegate control requests that aren't handled by standard
- *	device infrastructure or directed at a specific interface.
- * @bConfigurationValue: Copied into configuration descriptor.
- * @iConfiguration: Copied into configuration descriptor.
- * @bmAttributes: Copied into configuration descriptor.
- * @bMaxPower: Copied into configuration descriptor.
- * @cdev: assigned by @usb_add_config() before calling @bind(); this is
- *	the device associated with this configuration.
- *
- * Configurations are building blocks for gadget drivers structured around
- * function drivers.  Simple USB gadgets require only one function and one
- * configuration, and handle dual-speed hardware by always providing the same
- * functionality.  Slightly more complex gadgets may have more than one
- * single-function configuration at a given speed; or have configurations
- * that only work at one speed.
- *
- * Composite devices are, by definition, ones with configurations which
- * include more than one function.
- *
- * The lifecycle of a usb_configuration includes allocation, initialization
- * of the fields described above, and calling @usb_add_config() to set up
- * internal data and bind it to a specific device.  The configuration's
- * @bind() method is then used to initialize all the functions and then
- * call @usb_add_function() for them.
- *
- * Those functions would normally be independent of each other, but that's
- * not mandatory.  CDC WMC devices are an example where functions often
- * depend on other functions, with some functions subsidiary to others.
- * Such interdependency may be managed in any way, so long as all of the
- * descriptors complete by the time the composite driver returns from
- * its bind() routine.
- */
-struct usb_configuration {
-	const char			*label;
-	struct usb_gadget_strings	**strings;
-	const struct usb_descriptor_header **descriptors;
-
-	/* REVISIT:  bind() functions can be marked __init, which
-	 * makes trouble for section mismatch analysis.  See if
-	 * we can't restructure things to avoid mismatching...
-	 */
-
-	/* configuration management: unbind/setup */
-	void			(*unbind)(struct usb_configuration *);
-	int			(*setup)(struct usb_configuration *,
-					const struct usb_ctrlrequest *);
-
-	/* fields in the config descriptor */
-	u8			bConfigurationValue;
-	u8			iConfiguration;
-	u8			bmAttributes;
-	u8			bMaxPower;
-
-	struct usb_composite_dev	*cdev;
-
-	/* private: */
-	/* internals */
-	struct list_head	list;
-	struct list_head	functions;
-	u8			next_interface_id;
-	unsigned		superspeed:1;
-	unsigned		highspeed:1;
-	unsigned		fullspeed:1;
-	struct usb_function	*interface[MAX_CONFIG_INTERFACES];
-};
-
-int usb_add_config(struct usb_composite_dev *,
-		struct usb_configuration *,
-		int (*)(struct usb_configuration *));
-
-int usb_remove_config(struct usb_composite_dev *,
-		struct usb_configuration *);
-
-/**
- * struct usb_composite_driver - groups configurations into a gadget
- * @name: For diagnostics, identifies the driver.
- * @iProduct: Used as iProduct override if @dev->iProduct is not set.
- *	If NULL value of @name is taken.
- * @iManufacturer: Used as iManufacturer override if @dev->iManufacturer is
- *	not set. If NULL a default "<system> <release> with <udc>" value
- *	will be used.
- * @dev: Template descriptor for the device, including default device
- *	identifiers.
- * @strings: tables of strings, keyed by identifiers assigned during bind()
- *	and language IDs provided in control requests
- * @max_speed: Highest speed the driver supports.
- * @needs_serial: set to 1 if the gadget needs userspace to provide
- * 	a serial number.  If one is not provided, warning will be printed.
- * @unbind: Reverses bind; called as a side effect of unregistering
- *	this driver.
- * @disconnect: optional driver disconnect method
- * @suspend: Notifies when the host stops sending USB traffic,
- *	after function notifications
- * @resume: Notifies configuration when the host restarts USB traffic,
- *	before function notifications
- *
- * Devices default to reporting self powered operation.  Devices which rely
- * on bus powered operation should report this in their @bind() method.
- *
- * Before returning from bind, various fields in the template descriptor
- * may be overridden.  These include the idVendor/idProduct/bcdDevice values
- * normally to bind the appropriate host side driver, and the three strings
- * (iManufacturer, iProduct, iSerialNumber) normally used to provide user
- * meaningful device identifiers.  (The strings will not be defined unless
- * they are defined in @dev and @strings.)  The correct ep0 maxpacket size
- * is also reported, as defined by the underlying controller driver.
- */
-struct usb_composite_driver {
-	const char				*name;
-	const char				*iProduct;
-	const char				*iManufacturer;
-	const struct usb_device_descriptor	*dev;
-	struct usb_gadget_strings		**strings;
-	enum usb_device_speed			max_speed;
-	unsigned		needs_serial:1;
-
-	int			(*unbind)(struct usb_composite_dev *);
-
-	void			(*disconnect)(struct usb_composite_dev *);
-
-	/* global suspend hooks */
-	void			(*suspend)(struct usb_composite_dev *);
-	void			(*resume)(struct usb_composite_dev *);
-};
-
-extern int usb_composite_probe(struct usb_composite_driver *driver,
-			       int (*bind)(struct usb_composite_dev *cdev));
-extern void usb_composite_unregister(struct usb_composite_driver *driver);
-extern void usb_composite_setup_continue(struct usb_composite_dev *cdev);
-
-
-/**
- * struct usb_composite_device - represents one composite usb gadget
- * @gadget: read-only, abstracts the gadget's usb peripheral controller
- * @req: used for control responses; buffer is pre-allocated
- * @bufsiz: size of buffer pre-allocated in @req
- * @config: the currently active configuration
- *
- * One of these devices is allocated and initialized before the
- * associated device driver's bind() is called.
- *
- * OPEN ISSUE:  it appears that some WUSB devices will need to be
- * built by combining a normal (wired) gadget with a wireless one.
- * This revision of the gadget framework should probably try to make
- * sure doing that won't hurt too much.
- *
- * One notion for how to handle Wireless USB devices involves:
- * (a) a second gadget here, discovery mechanism TBD, but likely
- *     needing separate "register/unregister WUSB gadget" calls;
- * (b) updates to usb_gadget to include flags "is it wireless",
- *     "is it wired", plus (presumably in a wrapper structure)
- *     bandgroup and PHY info;
- * (c) presumably a wireless_ep wrapping a usb_ep, and reporting
- *     wireless-specific parameters like maxburst and maxsequence;
- * (d) configurations that are specific to wireless links;
- * (e) function drivers that understand wireless configs and will
- *     support wireless for (additional) function instances;
- * (f) a function to support association setup (like CBAF), not
- *     necessarily requiring a wireless adapter;
- * (g) composite device setup that can create one or more wireless
- *     configs, including appropriate association setup support;
- * (h) more, TBD.
- */
-struct usb_composite_dev {
-	struct usb_gadget		*gadget;
-	struct usb_request		*req;
-	unsigned			bufsiz;
-
-	struct usb_configuration	*config;
-
-	/* private: */
-	/* internals */
-	unsigned int			suspended:1;
-	struct usb_device_descriptor	desc;
-	struct list_head		configs;
-	struct usb_composite_driver	*driver;
-	u8				next_string_id;
-	u8				manufacturer_override;
-	u8				product_override;
-	u8				serial_override;
-
-	/* the gadget driver won't enable the data pullup
-	 * while the deactivation count is nonzero.
-	 */
-	unsigned			deactivations;
-
-	/* the composite driver won't complete the control transfer's
-	 * data/status stages till delayed_status is zero.
-	 */
-	int				delayed_status;
-
-	/* protects deactivations and delayed_status counts*/
-	spinlock_t			lock;
-};
-
-extern int usb_string_id(struct usb_composite_dev *c);
-extern int usb_string_ids_tab(struct usb_composite_dev *c,
-			      struct usb_string *str);
-extern int usb_string_ids_n(struct usb_composite_dev *c, unsigned n);
-
-
-/* messaging utils */
-#define DBG(d, fmt, args...) \
-	dev_dbg(&(d)->gadget->dev , fmt , ## args)
-#define VDBG(d, fmt, args...) \
-	dev_vdbg(&(d)->gadget->dev , fmt , ## args)
-#define ERROR(d, fmt, args...) \
-	dev_err(&(d)->gadget->dev , fmt , ## args)
-#define WARNING(d, fmt, args...) \
-	dev_warn(&(d)->gadget->dev , fmt , ## args)
-#define INFO(d, fmt, args...) \
-	dev_info(&(d)->gadget->dev , fmt , ## args)
-
-#endif	/* __LINUX_USB_COMPOSITE_H */
diff --git a/ANDROID_3.4.5/include/linux/usb/ehci_def.h b/ANDROID_3.4.5/include/linux/usb/ehci_def.h
deleted file mode 100644
index 7cc95ee3..00000000
--- a/ANDROID_3.4.5/include/linux/usb/ehci_def.h
+++ /dev/null
@@ -1,225 +0,0 @@
-/*
- * Copyright (c) 2001-2002 by David Brownell
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- * for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software Foundation,
- * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __LINUX_USB_EHCI_DEF_H
-#define __LINUX_USB_EHCI_DEF_H
-
-/* EHCI register interface, corresponds to EHCI Revision 0.95 specification */
-
-/* Section 2.2 Host Controller Capability Registers */
-struct ehci_caps {
-	/* these fields are specified as 8 and 16 bit registers,
-	 * but some hosts can't perform 8 or 16 bit PCI accesses.
-	 * some hosts treat caplength and hciversion as parts of a 32-bit
-	 * register, others treat them as two separate registers, this
-	 * affects the memory map for big endian controllers.
-	 */
-	u32		hc_capbase;
-#define HC_LENGTH(ehci, p)	(0x00ff&((p) >> /* bits 7:0 / offset 00h */ \
-				(ehci_big_endian_capbase(ehci) ? 24 : 0)))
-#define HC_VERSION(ehci, p)	(0xffff&((p) >> /* bits 31:16 / offset 02h */ \
-				(ehci_big_endian_capbase(ehci) ? 0 : 16)))
-	u32		hcs_params;     /* HCSPARAMS - offset 0x4 */
-#define HCS_DEBUG_PORT(p)	(((p)>>20)&0xf)	/* bits 23:20, debug port? */
-#define HCS_INDICATOR(p)	((p)&(1 << 16))	/* true: has port indicators */
-#define HCS_N_CC(p)		(((p)>>12)&0xf)	/* bits 15:12, #companion HCs */
-#define HCS_N_PCC(p)		(((p)>>8)&0xf)	/* bits 11:8, ports per CC */
-#define HCS_PORTROUTED(p)	((p)&(1 << 7))	/* true: port routing */
-#define HCS_PPC(p)		((p)&(1 << 4))	/* true: port power control */
-#define HCS_N_PORTS(p)		(((p)>>0)&0xf)	/* bits 3:0, ports on HC */
-
-	u32		hcc_params;      /* HCCPARAMS - offset 0x8 */
-/* EHCI 1.1 addendum */
-#define HCC_32FRAME_PERIODIC_LIST(p)	((p)&(1 << 19))
-#define HCC_PER_PORT_CHANGE_EVENT(p)	((p)&(1 << 18))
-#define HCC_LPM(p)			((p)&(1 << 17))
-#define HCC_HW_PREFETCH(p)		((p)&(1 << 16))
-
-#define HCC_EXT_CAPS(p)		(((p)>>8)&0xff)	/* for pci extended caps */
-#define HCC_ISOC_CACHE(p)       ((p)&(1 << 7))  /* true: can cache isoc frame */
-#define HCC_ISOC_THRES(p)       (((p)>>4)&0x7)  /* bits 6:4, uframes cached */
-#define HCC_CANPARK(p)		((p)&(1 << 2))  /* true: can park on async qh */
-#define HCC_PGM_FRAMELISTLEN(p) ((p)&(1 << 1))  /* true: periodic_size changes*/
-#define HCC_64BIT_ADDR(p)       ((p)&(1))       /* true: can use 64-bit addr */
-	u8		portroute[8];	 /* nibbles for routing - offset 0xC */
-};
-
-
-/* Section 2.3 Host Controller Operational Registers */
-struct ehci_regs {
-
-	/* USBCMD: offset 0x00 */
-	u32		command;
-
-/* EHCI 1.1 addendum */
-#define CMD_HIRD	(0xf<<24)	/* host initiated resume duration */
-#define CMD_PPCEE	(1<<15)		/* per port change event enable */
-#define CMD_FSP		(1<<14)		/* fully synchronized prefetch */
-#define CMD_ASPE	(1<<13)		/* async schedule prefetch enable */
-#define CMD_PSPE	(1<<12)		/* periodic schedule prefetch enable */
-/* 23:16 is r/w intr rate, in microframes; default "8" == 1/msec */
-#define CMD_PARK	(1<<11)		/* enable "park" on async qh */
-#define CMD_PARK_CNT(c)	(((c)>>8)&3)	/* how many transfers to park for */
-#define CMD_LRESET	(1<<7)		/* partial reset (no ports, etc) */
-#define CMD_IAAD	(1<<6)		/* "doorbell" interrupt async advance */
-#define CMD_ASE		(1<<5)		/* async schedule enable */
-#define CMD_PSE		(1<<4)		/* periodic schedule enable */
-/* 3:2 is periodic frame list size */
-#define CMD_RESET	(1<<1)		/* reset HC not bus */
-#define CMD_RUN		(1<<0)		/* start/stop HC */
-
-	/* USBSTS: offset 0x04 */
-	u32		status;
-#define STS_PPCE_MASK	(0xff<<16)	/* Per-Port change event 1-16 */
-#define STS_ASS		(1<<15)		/* Async Schedule Status */
-#define STS_PSS		(1<<14)		/* Periodic Schedule Status */
-#define STS_RECL	(1<<13)		/* Reclamation */
-#define STS_HALT	(1<<12)		/* Not running (any reason) */
-/* some bits reserved */
-	/* these STS_* flags are also intr_enable bits (USBINTR) */
-#define STS_IAA		(1<<5)		/* Interrupted on async advance */
-#define STS_FATAL	(1<<4)		/* such as some PCI access errors */
-#define STS_FLR		(1<<3)		/* frame list rolled over */
-#define STS_PCD		(1<<2)		/* port change detect */
-#define STS_ERR		(1<<1)		/* "error" completion (overflow, ...) */
-#define STS_INT		(1<<0)		/* "normal" completion (short, ...) */
-
-	/* USBINTR: offset 0x08 */
-	u32		intr_enable;
-
-	/* FRINDEX: offset 0x0C */
-	u32		frame_index;	/* current microframe number */
-	/* CTRLDSSEGMENT: offset 0x10 */
-	u32		segment;	/* address bits 63:32 if needed */
-	/* PERIODICLISTBASE: offset 0x14 */
-	u32		frame_list;	/* points to periodic list */
-	/* ASYNCLISTADDR: offset 0x18 */
-	u32		async_next;	/* address of next async queue head */
-
-	u32		reserved[9];
-
-	/* CONFIGFLAG: offset 0x40 */
-	u32		configured_flag;
-#define FLAG_CF		(1<<0)		/* true: we'll support "high speed" */
-
-	/* PORTSC: offset 0x44 */
-	u32		port_status[0];	/* up to N_PORTS */
-/* EHCI 1.1 addendum */
-#define PORTSC_SUSPEND_STS_ACK 0
-#define PORTSC_SUSPEND_STS_NYET 1
-#define PORTSC_SUSPEND_STS_STALL 2
-#define PORTSC_SUSPEND_STS_ERR 3
-
-#define PORT_DEV_ADDR	(0x7f<<25)		/* device address */
-#define PORT_SSTS	(0x3<<23)		/* suspend status */
-/* 31:23 reserved */
-#define PORT_WKOC_E	(1<<22)		/* wake on overcurrent (enable) */
-#define PORT_WKDISC_E	(1<<21)		/* wake on disconnect (enable) */
-#define PORT_WKCONN_E	(1<<20)		/* wake on connect (enable) */
-/* 19:16 for port testing */
-#define PORT_TEST(x)	(((x)&0xf)<<16)	/* Port Test Control */
-#define PORT_TEST_PKT	PORT_TEST(0x4)	/* Port Test Control - packet test */
-#define PORT_TEST_FORCE	PORT_TEST(0x5)	/* Port Test Control - force enable */
-#define PORT_LED_OFF	(0<<14)
-#define PORT_LED_AMBER	(1<<14)
-#define PORT_LED_GREEN	(2<<14)
-#define PORT_LED_MASK	(3<<14)
-#define PORT_OWNER	(1<<13)		/* true: companion hc owns this port */
-#define PORT_POWER	(1<<12)		/* true: has power (see PPC) */
-#define PORT_USB11(x) (((x)&(3<<10)) == (1<<10))	/* USB 1.1 device */
-/* 11:10 for detecting lowspeed devices (reset vs release ownership) */
-/* 9 reserved */
-#define PORT_LPM	(1<<9)		/* LPM transaction */
-#define PORT_RESET	(1<<8)		/* reset port */
-#define PORT_SUSPEND	(1<<7)		/* suspend port */
-#define PORT_RESUME	(1<<6)		/* resume it */
-#define PORT_OCC	(1<<5)		/* over current change */
-#define PORT_OC		(1<<4)		/* over current active */
-#define PORT_PEC	(1<<3)		/* port enable change */
-#define PORT_PE		(1<<2)		/* port enable */
-#define PORT_CSC	(1<<1)		/* connect status change */
-#define PORT_CONNECT	(1<<0)		/* device connected */
-#define PORT_RWC_BITS   (PORT_CSC | PORT_PEC | PORT_OCC)
-};
-
-#define USBMODE		0x68		/* USB Device mode */
-#define USBMODE_SDIS	(1<<3)		/* Stream disable */
-#define USBMODE_BE	(1<<2)		/* BE/LE endianness select */
-#define USBMODE_CM_HC	(3<<0)		/* host controller mode */
-#define USBMODE_CM_IDLE	(0<<0)		/* idle state */
-
-/* Moorestown has some non-standard registers, partially due to the fact that
- * its EHCI controller has both TT and LPM support. HOSTPCx are extensions to
- * PORTSCx
- */
-#define HOSTPC0		0x84		/* HOSTPC extension */
-#define HOSTPC_PHCD	(1<<22)		/* Phy clock disable */
-#define HOSTPC_PSPD	(3<<25)		/* Port speed detection */
-#define USBMODE_EX	0xc8		/* USB Device mode extension */
-#define USBMODE_EX_VBPS	(1<<5)		/* VBus Power Select On */
-#define USBMODE_EX_HC	(3<<0)		/* host controller mode */
-#define TXFILLTUNING	0x24		/* TX FIFO Tuning register */
-#define TXFIFO_DEFAULT	(8<<16)		/* FIFO burst threshold 8 */
-
-/* Appendix C, Debug port ... intended for use with special "debug devices"
- * that can help if there's no serial console.  (nonstandard enumeration.)
- */
-struct ehci_dbg_port {
-	u32	control;
-#define DBGP_OWNER	(1<<30)
-#define DBGP_ENABLED	(1<<28)
-#define DBGP_DONE	(1<<16)
-#define DBGP_INUSE	(1<<10)
-#define DBGP_ERRCODE(x)	(((x)>>7)&0x07)
-#	define DBGP_ERR_BAD	1
-#	define DBGP_ERR_SIGNAL	2
-#define DBGP_ERROR	(1<<6)
-#define DBGP_GO		(1<<5)
-#define DBGP_OUT	(1<<4)
-#define DBGP_LEN(x)	(((x)>>0)&0x0f)
-	u32	pids;
-#define DBGP_PID_GET(x)		(((x)>>16)&0xff)
-#define DBGP_PID_SET(data, tok)	(((data)<<8)|(tok))
-	u32	data03;
-	u32	data47;
-	u32	address;
-#define DBGP_EPADDR(dev, ep)	(((dev)<<8)|(ep))
-};
-
-#ifdef CONFIG_EARLY_PRINTK_DBGP
-#include <linux/init.h>
-extern int __init early_dbgp_init(char *s);
-extern struct console early_dbgp_console;
-#endif /* CONFIG_EARLY_PRINTK_DBGP */
-
-#ifdef CONFIG_EARLY_PRINTK_DBGP
-/* Call backs from ehci host driver to ehci debug driver */
-extern int dbgp_external_startup(void);
-extern int dbgp_reset_prep(void);
-#else
-static inline int dbgp_reset_prep(void)
-{
-	return 1;
-}
-static inline int dbgp_external_startup(void)
-{
-	return -1;
-}
-#endif
-
-#endif /* __LINUX_USB_EHCI_DEF_H */
diff --git a/ANDROID_3.4.5/include/linux/usb/ehci_pdriver.h b/ANDROID_3.4.5/include/linux/usb/ehci_pdriver.h
deleted file mode 100644
index 1894f42f..00000000
--- a/ANDROID_3.4.5/include/linux/usb/ehci_pdriver.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- * Copyright (C) 2012 Hauke Mehrtens <hauke@hauke-m.de>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- * for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software Foundation,
- * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __USB_CORE_EHCI_PDRIVER_H
-#define __USB_CORE_EHCI_PDRIVER_H
-
-/**
- * struct usb_ehci_pdata - platform_data for generic ehci driver
- *
- * @caps_offset:	offset of the EHCI Capability Registers to the start of
- *			the io memory region provided to the driver.
- * @has_tt:		set to 1 if TT is integrated in root hub.
- * @port_power_on:	set to 1 if the controller needs a power up after
- *			initialization.
- * @port_power_off:	set to 1 if the controller needs to be powered down
- *			after initialization.
- *
- * These are general configuration options for the EHCI controller. All of
- * these options are activating more or less workarounds for some hardware.
- */
-struct usb_ehci_pdata {
-	int		caps_offset;
-	unsigned	has_tt:1;
-	unsigned	has_synopsys_hc_bug:1;
-	unsigned	big_endian_desc:1;
-	unsigned	big_endian_mmio:1;
-	unsigned	port_power_on:1;
-	unsigned	port_power_off:1;
-};
-
-#endif /* __USB_CORE_EHCI_PDRIVER_H */
diff --git a/ANDROID_3.4.5/include/linux/usb/f_accessory.h b/ANDROID_3.4.5/include/linux/usb/f_accessory.h
deleted file mode 100644
index 61ebe0aa..00000000
--- a/ANDROID_3.4.5/include/linux/usb/f_accessory.h
+++ /dev/null
@@ -1,146 +0,0 @@
-/*
- * Gadget Function Driver for Android USB accessories
- *
- * Copyright (C) 2011 Google, Inc.
- * Author: Mike Lockwood <lockwood@android.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __LINUX_USB_F_ACCESSORY_H
-#define __LINUX_USB_F_ACCESSORY_H
-
-/* Use Google Vendor ID when in accessory mode */
-#define USB_ACCESSORY_VENDOR_ID 0x18D1
-
-
-/* Product ID to use when in accessory mode */
-#define USB_ACCESSORY_PRODUCT_ID 0x2D00
-
-/* Product ID to use when in accessory mode and adb is enabled */
-#define USB_ACCESSORY_ADB_PRODUCT_ID 0x2D01
-
-/* Indexes for strings sent by the host via ACCESSORY_SEND_STRING */
-#define ACCESSORY_STRING_MANUFACTURER   0
-#define ACCESSORY_STRING_MODEL          1
-#define ACCESSORY_STRING_DESCRIPTION    2
-#define ACCESSORY_STRING_VERSION        3
-#define ACCESSORY_STRING_URI            4
-#define ACCESSORY_STRING_SERIAL         5
-
-/* Control request for retrieving device's protocol version
- *
- *	requestType:    USB_DIR_IN | USB_TYPE_VENDOR
- *	request:        ACCESSORY_GET_PROTOCOL
- *	value:          0
- *	index:          0
- *	data            version number (16 bits little endian)
- *                     1 for original accessory support
- *                     2 adds HID and device to host audio support
- */
-#define ACCESSORY_GET_PROTOCOL  51
-
-/* Control request for host to send a string to the device
- *
- *	requestType:    USB_DIR_OUT | USB_TYPE_VENDOR
- *	request:        ACCESSORY_SEND_STRING
- *	value:          0
- *	index:          string ID
- *	data            zero terminated UTF8 string
- *
- *  The device can later retrieve these strings via the
- *  ACCESSORY_GET_STRING_* ioctls
- */
-#define ACCESSORY_SEND_STRING   52
-
-/* Control request for starting device in accessory mode.
- * The host sends this after setting all its strings to the device.
- *
- *	requestType:    USB_DIR_OUT | USB_TYPE_VENDOR
- *	request:        ACCESSORY_START
- *	value:          0
- *	index:          0
- *	data            none
- */
-#define ACCESSORY_START         53
-
-/* Control request for registering a HID device.
- * Upon registering, a unique ID is sent by the accessory in the
- * value parameter. This ID will be used for future commands for
- * the device
- *
- *	requestType:    USB_DIR_OUT | USB_TYPE_VENDOR
- *	request:        ACCESSORY_REGISTER_HID_DEVICE
- *	value:          Accessory assigned ID for the HID device
- *	index:          total length of the HID report descriptor
- *	data            none
- */
-#define ACCESSORY_REGISTER_HID         54
-
-/* Control request for unregistering a HID device.
- *
- *	requestType:    USB_DIR_OUT | USB_TYPE_VENDOR
- *	request:        ACCESSORY_REGISTER_HID
- *	value:          Accessory assigned ID for the HID device
- *	index:          0
- *	data            none
- */
-#define ACCESSORY_UNREGISTER_HID         55
-
-/* Control request for sending the HID report descriptor.
- * If the HID descriptor is longer than the endpoint zero max packet size,
- * the descriptor will be sent in multiple ACCESSORY_SET_HID_REPORT_DESC
- * commands. The data for the descriptor must be sent sequentially
- * if multiple packets are needed.
- *
- *	requestType:    USB_DIR_OUT | USB_TYPE_VENDOR
- *	request:        ACCESSORY_SET_HID_REPORT_DESC
- *	value:          Accessory assigned ID for the HID device
- *	index:          offset of data in descriptor
- *                      (needed when HID descriptor is too big for one packet)
- *	data            the HID report descriptor
- */
-#define ACCESSORY_SET_HID_REPORT_DESC         56
-
-/* Control request for sending HID events.
- *
- *	requestType:    USB_DIR_OUT | USB_TYPE_VENDOR
- *	request:        ACCESSORY_SEND_HID_EVENT
- *	value:          Accessory assigned ID for the HID device
- *	index:          0
- *	data            the HID report for the event
- */
-#define ACCESSORY_SEND_HID_EVENT         57
-
-/* Control request for setting the audio mode.
- *
- *	requestType:	USB_DIR_OUT | USB_TYPE_VENDOR
- *	request:        ACCESSORY_SET_AUDIO_MODE
- *	value:          0 - no audio
- *                     1 - device to host, 44100 16-bit stereo PCM
- *	index:          0
- *	data            none
- */
-#define ACCESSORY_SET_AUDIO_MODE         58
-
-/* ioctls for retrieving strings set by the host */
-#define ACCESSORY_GET_STRING_MANUFACTURER   _IOW('M', 1, char[256])
-#define ACCESSORY_GET_STRING_MODEL          _IOW('M', 2, char[256])
-#define ACCESSORY_GET_STRING_DESCRIPTION    _IOW('M', 3, char[256])
-#define ACCESSORY_GET_STRING_VERSION        _IOW('M', 4, char[256])
-#define ACCESSORY_GET_STRING_URI            _IOW('M', 5, char[256])
-#define ACCESSORY_GET_STRING_SERIAL         _IOW('M', 6, char[256])
-/* returns 1 if there is a start request pending */
-#define ACCESSORY_IS_START_REQUESTED        _IO('M', 7)
-/* returns audio mode (set via the ACCESSORY_SET_AUDIO_MODE control request) */
-#define ACCESSORY_GET_AUDIO_MODE            _IO('M', 8)
-
-#endif /* __LINUX_USB_F_ACCESSORY_H */
diff --git a/ANDROID_3.4.5/include/linux/usb/f_mtp.h b/ANDROID_3.4.5/include/linux/usb/f_mtp.h
deleted file mode 100644
index 72a432e2..00000000
--- a/ANDROID_3.4.5/include/linux/usb/f_mtp.h
+++ /dev/null
@@ -1,75 +0,0 @@
-/*
- * Gadget Function Driver for MTP
- *
- * Copyright (C) 2010 Google, Inc.
- * Author: Mike Lockwood <lockwood@android.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __LINUX_USB_F_MTP_H
-#define __LINUX_USB_F_MTP_H
-
-#include <linux/ioctl.h>
-
-#ifdef __KERNEL__
-
-struct mtp_data_header {
-	/* length of packet, including this header */
-	uint32_t	length;
-	/* container type (2 for data packet) */
-	uint16_t	type;
-	/* MTP command code */
-	uint16_t    command;
-	/* MTP transaction ID */
-	uint32_t	transaction_id;
-};
-
-#endif /* __KERNEL__ */
-
-struct mtp_file_range {
-	/* file descriptor for file to transfer */
-	int			fd;
-	/* offset in file for start of transfer */
-	loff_t		offset;
-	/* number of bytes to transfer */
-	int64_t		length;
-	/* MTP command ID for data header,
-	 * used only for MTP_SEND_FILE_WITH_HEADER
-	 */
-	uint16_t	command;
-	/* MTP transaction ID for data header,
-	 * used only for MTP_SEND_FILE_WITH_HEADER
-	 */
-	uint32_t	transaction_id;
-};
-
-struct mtp_event {
-	/* size of the event */
-	size_t		length;
-	/* event data to send */
-	void		*data;
-};
-
-/* Sends the specified file range to the host */
-#define MTP_SEND_FILE              _IOW('M', 0, struct mtp_file_range)
-/* Receives data from the host and writes it to a file.
- * The file is created if it does not exist.
- */
-#define MTP_RECEIVE_FILE           _IOW('M', 1, struct mtp_file_range)
-/* Sends an event to the host via the interrupt endpoint */
-#define MTP_SEND_EVENT             _IOW('M', 3, struct mtp_event)
-/* Sends the specified file range to the host,
- * with a 12 byte MTP data packet header at the beginning.
- */
-#define MTP_SEND_FILE_WITH_HEADER  _IOW('M', 4, struct mtp_file_range)
-
-#endif /* __LINUX_USB_F_MTP_H */
diff --git a/ANDROID_3.4.5/include/linux/usb/functionfs.h b/ANDROID_3.4.5/include/linux/usb/functionfs.h
deleted file mode 100644
index 7587ef93..00000000
--- a/ANDROID_3.4.5/include/linux/usb/functionfs.h
+++ /dev/null
@@ -1,199 +0,0 @@
-#ifndef __LINUX_FUNCTIONFS_H__
-#define __LINUX_FUNCTIONFS_H__ 1
-
-
-#include <linux/types.h>
-#include <linux/ioctl.h>
-
-#include <linux/usb/ch9.h>
-
-
-enum {
-	FUNCTIONFS_DESCRIPTORS_MAGIC = 1,
-	FUNCTIONFS_STRINGS_MAGIC     = 2
-};
-
-
-#ifndef __KERNEL__
-
-/* Descriptor of an non-audio endpoint */
-struct usb_endpoint_descriptor_no_audio {
-	__u8  bLength;
-	__u8  bDescriptorType;
-
-	__u8  bEndpointAddress;
-	__u8  bmAttributes;
-	__le16 wMaxPacketSize;
-	__u8  bInterval;
-} __attribute__((packed));
-
-
-/*
- * All numbers must be in little endian order.
- */
-
-struct usb_functionfs_descs_head {
-	__le32 magic;
-	__le32 length;
-	__le32 fs_count;
-	__le32 hs_count;
-} __attribute__((packed));
-
-/*
- * Descriptors format:
- *
- * | off | name      | type         | description                          |
- * |-----+-----------+--------------+--------------------------------------|
- * |   0 | magic     | LE32         | FUNCTIONFS_{FS,HS}_DESCRIPTORS_MAGIC |
- * |   4 | length    | LE32         | length of the whole data chunk       |
- * |   8 | fs_count  | LE32         | number of full-speed descriptors     |
- * |  12 | hs_count  | LE32         | number of high-speed descriptors     |
- * |  16 | fs_descrs | Descriptor[] | list of full-speed descriptors       |
- * |     | hs_descrs | Descriptor[] | list of high-speed descriptors       |
- *
- * descs are just valid USB descriptors and have the following format:
- *
- * | off | name            | type | description              |
- * |-----+-----------------+------+--------------------------|
- * |   0 | bLength         | U8   | length of the descriptor |
- * |   1 | bDescriptorType | U8   | descriptor type          |
- * |   2 | payload         |      | descriptor's payload     |
- */
-
-struct usb_functionfs_strings_head {
-	__le32 magic;
-	__le32 length;
-	__le32 str_count;
-	__le32 lang_count;
-} __attribute__((packed));
-
-/*
- * Strings format:
- *
- * | off | name       | type                  | description                |
- * |-----+------------+-----------------------+----------------------------|
- * |   0 | magic      | LE32                  | FUNCTIONFS_STRINGS_MAGIC   |
- * |   4 | length     | LE32                  | length of the data chunk   |
- * |   8 | str_count  | LE32                  | number of strings          |
- * |  12 | lang_count | LE32                  | number of languages        |
- * |  16 | stringtab  | StringTab[lang_count] | table of strings per lang  |
- *
- * For each language there is one stringtab entry (ie. there are lang_count
- * stringtab entires).  Each StringTab has following format:
- *
- * | off | name    | type              | description                        |
- * |-----+---------+-------------------+------------------------------------|
- * |   0 | lang    | LE16              | language code                      |
- * |   2 | strings | String[str_count] | array of strings in given language |
- *
- * For each string there is one strings entry (ie. there are str_count
- * string entries).  Each String is a NUL terminated string encoded in
- * UTF-8.
- */
-
-#endif
-
-
-/*
- * Events are delivered on the ep0 file descriptor, when the user mode driver
- * reads from this file descriptor after writing the descriptors.  Don't
- * stop polling this descriptor.
- */
-
-enum usb_functionfs_event_type {
-	FUNCTIONFS_BIND,
-	FUNCTIONFS_UNBIND,
-
-	FUNCTIONFS_ENABLE,
-	FUNCTIONFS_DISABLE,
-
-	FUNCTIONFS_SETUP,
-
-	FUNCTIONFS_SUSPEND,
-	FUNCTIONFS_RESUME
-};
-
-/* NOTE:  this structure must stay the same size and layout on
- * both 32-bit and 64-bit kernels.
- */
-struct usb_functionfs_event {
-	union {
-		/* SETUP: packet; DATA phase i/o precedes next event
-		 *(setup.bmRequestType & USB_DIR_IN) flags direction */
-		struct usb_ctrlrequest	setup;
-	} __attribute__((packed)) u;
-
-	/* enum usb_functionfs_event_type */
-	__u8				type;
-	__u8				_pad[3];
-} __attribute__((packed));
-
-
-/* Endpoint ioctls */
-/* The same as in gadgetfs */
-
-/* IN transfers may be reported to the gadget driver as complete
- *	when the fifo is loaded, before the host reads the data;
- * OUT transfers may be reported to the host's "client" driver as
- *	complete when they're sitting in the FIFO unread.
- * THIS returns how many bytes are "unclaimed" in the endpoint fifo
- * (needed for precise fault handling, when the hardware allows it)
- */
-#define	FUNCTIONFS_FIFO_STATUS	_IO('g', 1)
-
-/* discards any unclaimed data in the fifo. */
-#define	FUNCTIONFS_FIFO_FLUSH	_IO('g', 2)
-
-/* resets endpoint halt+toggle; used to implement set_interface.
- * some hardware (like pxa2xx) can't support this.
- */
-#define	FUNCTIONFS_CLEAR_HALT	_IO('g', 3)
-
-/* Specific for functionfs */
-
-/*
- * Returns reverse mapping of an interface.  Called on EP0.  If there
- * is no such interface returns -EDOM.  If function is not active
- * returns -ENODEV.
- */
-#define	FUNCTIONFS_INTERFACE_REVMAP	_IO('g', 128)
-
-/*
- * Returns real bEndpointAddress of an endpoint.  If function is not
- * active returns -ENODEV.
- */
-#define	FUNCTIONFS_ENDPOINT_REVMAP	_IO('g', 129)
-
-
-#ifdef __KERNEL__
-
-struct ffs_data;
-struct usb_composite_dev;
-struct usb_configuration;
-
-
-static int  functionfs_init(void) __attribute__((warn_unused_result));
-static void functionfs_cleanup(void);
-
-static int functionfs_bind(struct ffs_data *ffs, struct usb_composite_dev *cdev)
-	__attribute__((warn_unused_result, nonnull));
-static void functionfs_unbind(struct ffs_data *ffs)
-	__attribute__((nonnull));
-
-static int functionfs_bind_config(struct usb_composite_dev *cdev,
-				  struct usb_configuration *c,
-				  struct ffs_data *ffs)
-	__attribute__((warn_unused_result, nonnull));
-
-
-static int functionfs_ready_callback(struct ffs_data *ffs)
-	__attribute__((warn_unused_result, nonnull));
-static void functionfs_closed_callback(struct ffs_data *ffs)
-	__attribute__((nonnull));
-static int functionfs_check_dev_callback(const char *dev_name)
-	__attribute__((warn_unused_result, nonnull));
-
-
-#endif
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/usb/g_hid.h b/ANDROID_3.4.5/include/linux/usb/g_hid.h
deleted file mode 100644
index 50f5745d..00000000
--- a/ANDROID_3.4.5/include/linux/usb/g_hid.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * g_hid.h -- Header file for USB HID gadget driver
- *
- * Copyright (C) 2010 Fabien Chouteau <fabien.chouteau@barco.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __LINUX_USB_G_HID_H
-#define __LINUX_USB_G_HID_H
-
-struct hidg_func_descriptor {
-	unsigned char		subclass;
-	unsigned char		protocol;
-	unsigned short		report_length;
-	unsigned short		report_desc_length;
-	unsigned char		report_desc[];
-};
-
-#endif /* __LINUX_USB_G_HID_H */
diff --git a/ANDROID_3.4.5/include/linux/usb/g_printer.h b/ANDROID_3.4.5/include/linux/usb/g_printer.h
deleted file mode 100644
index 6178fde5..00000000
--- a/ANDROID_3.4.5/include/linux/usb/g_printer.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * g_printer.h -- Header file for USB Printer gadget driver
- *
- * Copyright (C) 2007 Craig W. Nadler
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __LINUX_USB_G_PRINTER_H
-#define __LINUX_USB_G_PRINTER_H
-
-#define PRINTER_NOT_ERROR	0x08
-#define PRINTER_SELECTED	0x10
-#define PRINTER_PAPER_EMPTY	0x20
-
-/* The 'g' code is also used by gadgetfs ioctl requests.
- * Don't add any colliding codes to either driver, and keep
- * them in unique ranges (size 0x20 for now).
- */
-#define GADGET_GET_PRINTER_STATUS	_IOR('g', 0x21, unsigned char)
-#define GADGET_SET_PRINTER_STATUS	_IOWR('g', 0x22, unsigned char)
-
-#endif /* __LINUX_USB_G_PRINTER_H */
diff --git a/ANDROID_3.4.5/include/linux/usb/gadget.h b/ANDROID_3.4.5/include/linux/usb/gadget.h
deleted file mode 100644
index 9517466a..00000000
--- a/ANDROID_3.4.5/include/linux/usb/gadget.h
+++ /dev/null
@@ -1,975 +0,0 @@
-/*
- * <linux/usb/gadget.h>
- *
- * We call the USB code inside a Linux-based peripheral device a "gadget"
- * driver, except for the hardware-specific bus glue.  One USB host can
- * master many USB gadgets, but the gadgets are only slaved to one host.
- *
- *
- * (C) Copyright 2002-2004 by David Brownell
- * All Rights Reserved.
- *
- * This software is licensed under the GNU GPL version 2.
- */
-
-#ifndef __LINUX_USB_GADGET_H
-#define __LINUX_USB_GADGET_H
-
-#include <linux/device.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/list.h>
-#include <linux/slab.h>
-#include <linux/scatterlist.h>
-#include <linux/types.h>
-#include <linux/usb/ch9.h>
-
-struct usb_ep;
-
-/**
- * struct usb_request - describes one i/o request
- * @buf: Buffer used for data.  Always provide this; some controllers
- *	only use PIO, or don't use DMA for some endpoints.
- * @dma: DMA address corresponding to 'buf'.  If you don't set this
- *	field, and the usb controller needs one, it is responsible
- *	for mapping and unmapping the buffer.
- * @sg: a scatterlist for SG-capable controllers.
- * @num_sgs: number of SG entries
- * @num_mapped_sgs: number of SG entries mapped to DMA (internal)
- * @length: Length of that data
- * @stream_id: The stream id, when USB3.0 bulk streams are being used
- * @no_interrupt: If true, hints that no completion irq is needed.
- *	Helpful sometimes with deep request queues that are handled
- *	directly by DMA controllers.
- * @zero: If true, when writing data, makes the last packet be "short"
- *     by adding a zero length packet as needed;
- * @short_not_ok: When reading data, makes short packets be
- *     treated as errors (queue stops advancing till cleanup).
- * @complete: Function called when request completes, so this request and
- *	its buffer may be re-used.  The function will always be called with
- *	interrupts disabled, and it must not sleep.
- *	Reads terminate with a short packet, or when the buffer fills,
- *	whichever comes first.  When writes terminate, some data bytes
- *	will usually still be in flight (often in a hardware fifo).
- *	Errors (for reads or writes) stop the queue from advancing
- *	until the completion function returns, so that any transfers
- *	invalidated by the error may first be dequeued.
- * @context: For use by the completion callback
- * @list: For use by the gadget driver.
- * @status: Reports completion code, zero or a negative errno.
- *	Normally, faults block the transfer queue from advancing until
- *	the completion callback returns.
- *	Code "-ESHUTDOWN" indicates completion caused by device disconnect,
- *	or when the driver disabled the endpoint.
- * @actual: Reports bytes transferred to/from the buffer.  For reads (OUT
- *	transfers) this may be less than the requested length.  If the
- *	short_not_ok flag is set, short reads are treated as errors
- *	even when status otherwise indicates successful completion.
- *	Note that for writes (IN transfers) some data bytes may still
- *	reside in a device-side FIFO when the request is reported as
- *	complete.
- *
- * These are allocated/freed through the endpoint they're used with.  The
- * hardware's driver can add extra per-request data to the memory it returns,
- * which often avoids separate memory allocations (potential failures),
- * later when the request is queued.
- *
- * Request flags affect request handling, such as whether a zero length
- * packet is written (the "zero" flag), whether a short read should be
- * treated as an error (blocking request queue advance, the "short_not_ok"
- * flag), or hinting that an interrupt is not required (the "no_interrupt"
- * flag, for use with deep request queues).
- *
- * Bulk endpoints can use any size buffers, and can also be used for interrupt
- * transfers. interrupt-only endpoints can be much less functional.
- *
- * NOTE:  this is analogous to 'struct urb' on the host side, except that
- * it's thinner and promotes more pre-allocation.
- */
-
-struct usb_request {
-	void			*buf;
-	unsigned		length;
-	dma_addr_t		dma;
-
-	struct scatterlist	*sg;
-	unsigned		num_sgs;
-	unsigned		num_mapped_sgs;
-
-	unsigned		stream_id:16;
-	unsigned		no_interrupt:1;
-	unsigned		zero:1;
-	unsigned		short_not_ok:1;
-
-	void			(*complete)(struct usb_ep *ep,
-					struct usb_request *req);
-	void			*context;
-	struct list_head	list;
-
-	int			status;
-	unsigned		actual;
-};
-
-/*-------------------------------------------------------------------------*/
-
-/* endpoint-specific parts of the api to the usb controller hardware.
- * unlike the urb model, (de)multiplexing layers are not required.
- * (so this api could slash overhead if used on the host side...)
- *
- * note that device side usb controllers commonly differ in how many
- * endpoints they support, as well as their capabilities.
- */
-struct usb_ep_ops {
-	int (*enable) (struct usb_ep *ep,
-		const struct usb_endpoint_descriptor *desc);
-	int (*disable) (struct usb_ep *ep);
-
-	struct usb_request *(*alloc_request) (struct usb_ep *ep,
-		gfp_t gfp_flags);
-	void (*free_request) (struct usb_ep *ep, struct usb_request *req);
-
-	int (*queue) (struct usb_ep *ep, struct usb_request *req,
-		gfp_t gfp_flags);
-	int (*dequeue) (struct usb_ep *ep, struct usb_request *req);
-
-	int (*set_halt) (struct usb_ep *ep, int value);
-	int (*set_wedge) (struct usb_ep *ep);
-
-	int (*fifo_status) (struct usb_ep *ep);
-	void (*fifo_flush) (struct usb_ep *ep);
-};
-
-/**
- * struct usb_ep - device side representation of USB endpoint
- * @name:identifier for the endpoint, such as "ep-a" or "ep9in-bulk"
- * @ops: Function pointers used to access hardware-specific operations.
- * @ep_list:the gadget's ep_list holds all of its endpoints
- * @maxpacket:The maximum packet size used on this endpoint.  The initial
- *	value can sometimes be reduced (hardware allowing), according to
- *      the endpoint descriptor used to configure the endpoint.
- * @max_streams: The maximum number of streams supported
- *	by this EP (0 - 16, actual number is 2^n)
- * @mult: multiplier, 'mult' value for SS Isoc EPs
- * @maxburst: the maximum number of bursts supported by this EP (for usb3)
- * @driver_data:for use by the gadget driver.
- * @address: used to identify the endpoint when finding descriptor that
- *	matches connection speed
- * @desc: endpoint descriptor.  This pointer is set before the endpoint is
- *	enabled and remains valid until the endpoint is disabled.
- * @comp_desc: In case of SuperSpeed support, this is the endpoint companion
- *	descriptor that is used to configure the endpoint
- *
- * the bus controller driver lists all the general purpose endpoints in
- * gadget->ep_list.  the control endpoint (gadget->ep0) is not in that list,
- * and is accessed only in response to a driver setup() callback.
- */
-struct usb_ep {
-	void			*driver_data;
-
-	const char		*name;
-	const struct usb_ep_ops	*ops;
-	struct list_head	ep_list;
-	unsigned		maxpacket:16;
-	unsigned		max_streams:16;
-	unsigned		mult:2;
-	unsigned		maxburst:5;
-	u8			address;
-	const struct usb_endpoint_descriptor	*desc;
-	const struct usb_ss_ep_comp_descriptor	*comp_desc;
-};
-
-/*-------------------------------------------------------------------------*/
-
-/**
- * usb_ep_enable - configure endpoint, making it usable
- * @ep:the endpoint being configured.  may not be the endpoint named "ep0".
- *	drivers discover endpoints through the ep_list of a usb_gadget.
- *
- * When configurations are set, or when interface settings change, the driver
- * will enable or disable the relevant endpoints.  while it is enabled, an
- * endpoint may be used for i/o until the driver receives a disconnect() from
- * the host or until the endpoint is disabled.
- *
- * the ep0 implementation (which calls this routine) must ensure that the
- * hardware capabilities of each endpoint match the descriptor provided
- * for it.  for example, an endpoint named "ep2in-bulk" would be usable
- * for interrupt transfers as well as bulk, but it likely couldn't be used
- * for iso transfers or for endpoint 14.  some endpoints are fully
- * configurable, with more generic names like "ep-a".  (remember that for
- * USB, "in" means "towards the USB master".)
- *
- * returns zero, or a negative error code.
- */
-static inline int usb_ep_enable(struct usb_ep *ep)
-{
-	return ep->ops->enable(ep, ep->desc);
-}
-
-/**
- * usb_ep_disable - endpoint is no longer usable
- * @ep:the endpoint being unconfigured.  may not be the endpoint named "ep0".
- *
- * no other task may be using this endpoint when this is called.
- * any pending and uncompleted requests will complete with status
- * indicating disconnect (-ESHUTDOWN) before this call returns.
- * gadget drivers must call usb_ep_enable() again before queueing
- * requests to the endpoint.
- *
- * returns zero, or a negative error code.
- */
-static inline int usb_ep_disable(struct usb_ep *ep)
-{
-	return ep->ops->disable(ep);
-}
-
-/**
- * usb_ep_alloc_request - allocate a request object to use with this endpoint
- * @ep:the endpoint to be used with with the request
- * @gfp_flags:GFP_* flags to use
- *
- * Request objects must be allocated with this call, since they normally
- * need controller-specific setup and may even need endpoint-specific
- * resources such as allocation of DMA descriptors.
- * Requests may be submitted with usb_ep_queue(), and receive a single
- * completion callback.  Free requests with usb_ep_free_request(), when
- * they are no longer needed.
- *
- * Returns the request, or null if one could not be allocated.
- */
-static inline struct usb_request *usb_ep_alloc_request(struct usb_ep *ep,
-						       gfp_t gfp_flags)
-{
-	return ep->ops->alloc_request(ep, gfp_flags);
-}
-
-/**
- * usb_ep_free_request - frees a request object
- * @ep:the endpoint associated with the request
- * @req:the request being freed
- *
- * Reverses the effect of usb_ep_alloc_request().
- * Caller guarantees the request is not queued, and that it will
- * no longer be requeued (or otherwise used).
- */
-static inline void usb_ep_free_request(struct usb_ep *ep,
-				       struct usb_request *req)
-{
-	ep->ops->free_request(ep, req);
-}
-
-/**
- * usb_ep_queue - queues (submits) an I/O request to an endpoint.
- * @ep:the endpoint associated with the request
- * @req:the request being submitted
- * @gfp_flags: GFP_* flags to use in case the lower level driver couldn't
- *	pre-allocate all necessary memory with the request.
- *
- * This tells the device controller to perform the specified request through
- * that endpoint (reading or writing a buffer).  When the request completes,
- * including being canceled by usb_ep_dequeue(), the request's completion
- * routine is called to return the request to the driver.  Any endpoint
- * (except control endpoints like ep0) may have more than one transfer
- * request queued; they complete in FIFO order.  Once a gadget driver
- * submits a request, that request may not be examined or modified until it
- * is given back to that driver through the completion callback.
- *
- * Each request is turned into one or more packets.  The controller driver
- * never merges adjacent requests into the same packet.  OUT transfers
- * will sometimes use data that's already buffered in the hardware.
- * Drivers can rely on the fact that the first byte of the request's buffer
- * always corresponds to the first byte of some USB packet, for both
- * IN and OUT transfers.
- *
- * Bulk endpoints can queue any amount of data; the transfer is packetized
- * automatically.  The last packet will be short if the request doesn't fill it
- * out completely.  Zero length packets (ZLPs) should be avoided in portable
- * protocols since not all usb hardware can successfully handle zero length
- * packets.  (ZLPs may be explicitly written, and may be implicitly written if
- * the request 'zero' flag is set.)  Bulk endpoints may also be used
- * for interrupt transfers; but the reverse is not true, and some endpoints
- * won't support every interrupt transfer.  (Such as 768 byte packets.)
- *
- * Interrupt-only endpoints are less functional than bulk endpoints, for
- * example by not supporting queueing or not handling buffers that are
- * larger than the endpoint's maxpacket size.  They may also treat data
- * toggle differently.
- *
- * Control endpoints ... after getting a setup() callback, the driver queues
- * one response (even if it would be zero length).  That enables the
- * status ack, after transferring data as specified in the response.  Setup
- * functions may return negative error codes to generate protocol stalls.
- * (Note that some USB device controllers disallow protocol stall responses
- * in some cases.)  When control responses are deferred (the response is
- * written after the setup callback returns), then usb_ep_set_halt() may be
- * used on ep0 to trigger protocol stalls.  Depending on the controller,
- * it may not be possible to trigger a status-stage protocol stall when the
- * data stage is over, that is, from within the response's completion
- * routine.
- *
- * For periodic endpoints, like interrupt or isochronous ones, the usb host
- * arranges to poll once per interval, and the gadget driver usually will
- * have queued some data to transfer at that time.
- *
- * Returns zero, or a negative error code.  Endpoints that are not enabled
- * report errors; errors will also be
- * reported when the usb peripheral is disconnected.
- */
-static inline int usb_ep_queue(struct usb_ep *ep,
-			       struct usb_request *req, gfp_t gfp_flags)
-{
-	return ep->ops->queue(ep, req, gfp_flags);
-}
-
-/**
- * usb_ep_dequeue - dequeues (cancels, unlinks) an I/O request from an endpoint
- * @ep:the endpoint associated with the request
- * @req:the request being canceled
- *
- * if the request is still active on the endpoint, it is dequeued and its
- * completion routine is called (with status -ECONNRESET); else a negative
- * error code is returned.
- *
- * note that some hardware can't clear out write fifos (to unlink the request
- * at the head of the queue) except as part of disconnecting from usb.  such
- * restrictions prevent drivers from supporting configuration changes,
- * even to configuration zero (a "chapter 9" requirement).
- */
-static inline int usb_ep_dequeue(struct usb_ep *ep, struct usb_request *req)
-{
-	return ep->ops->dequeue(ep, req);
-}
-
-/**
- * usb_ep_set_halt - sets the endpoint halt feature.
- * @ep: the non-isochronous endpoint being stalled
- *
- * Use this to stall an endpoint, perhaps as an error report.
- * Except for control endpoints,
- * the endpoint stays halted (will not stream any data) until the host
- * clears this feature; drivers may need to empty the endpoint's request
- * queue first, to make sure no inappropriate transfers happen.
- *
- * Note that while an endpoint CLEAR_FEATURE will be invisible to the
- * gadget driver, a SET_INTERFACE will not be.  To reset endpoints for the
- * current altsetting, see usb_ep_clear_halt().  When switching altsettings,
- * it's simplest to use usb_ep_enable() or usb_ep_disable() for the endpoints.
- *
- * Returns zero, or a negative error code.  On success, this call sets
- * underlying hardware state that blocks data transfers.
- * Attempts to halt IN endpoints will fail (returning -EAGAIN) if any
- * transfer requests are still queued, or if the controller hardware
- * (usually a FIFO) still holds bytes that the host hasn't collected.
- */
-static inline int usb_ep_set_halt(struct usb_ep *ep)
-{
-	return ep->ops->set_halt(ep, 1);
-}
-
-/**
- * usb_ep_clear_halt - clears endpoint halt, and resets toggle
- * @ep:the bulk or interrupt endpoint being reset
- *
- * Use this when responding to the standard usb "set interface" request,
- * for endpoints that aren't reconfigured, after clearing any other state
- * in the endpoint's i/o queue.
- *
- * Returns zero, or a negative error code.  On success, this call clears
- * the underlying hardware state reflecting endpoint halt and data toggle.
- * Note that some hardware can't support this request (like pxa2xx_udc),
- * and accordingly can't correctly implement interface altsettings.
- */
-static inline int usb_ep_clear_halt(struct usb_ep *ep)
-{
-	return ep->ops->set_halt(ep, 0);
-}
-
-/**
- * usb_ep_set_wedge - sets the halt feature and ignores clear requests
- * @ep: the endpoint being wedged
- *
- * Use this to stall an endpoint and ignore CLEAR_FEATURE(HALT_ENDPOINT)
- * requests. If the gadget driver clears the halt status, it will
- * automatically unwedge the endpoint.
- *
- * Returns zero on success, else negative errno.
- */
-static inline int
-usb_ep_set_wedge(struct usb_ep *ep)
-{
-	if (ep->ops->set_wedge)
-		return ep->ops->set_wedge(ep);
-	else
-		return ep->ops->set_halt(ep, 1);
-}
-
-/**
- * usb_ep_fifo_status - returns number of bytes in fifo, or error
- * @ep: the endpoint whose fifo status is being checked.
- *
- * FIFO endpoints may have "unclaimed data" in them in certain cases,
- * such as after aborted transfers.  Hosts may not have collected all
- * the IN data written by the gadget driver (and reported by a request
- * completion).  The gadget driver may not have collected all the data
- * written OUT to it by the host.  Drivers that need precise handling for
- * fault reporting or recovery may need to use this call.
- *
- * This returns the number of such bytes in the fifo, or a negative
- * errno if the endpoint doesn't use a FIFO or doesn't support such
- * precise handling.
- */
-static inline int usb_ep_fifo_status(struct usb_ep *ep)
-{
-	if (ep->ops->fifo_status)
-		return ep->ops->fifo_status(ep);
-	else
-		return -EOPNOTSUPP;
-}
-
-/**
- * usb_ep_fifo_flush - flushes contents of a fifo
- * @ep: the endpoint whose fifo is being flushed.
- *
- * This call may be used to flush the "unclaimed data" that may exist in
- * an endpoint fifo after abnormal transaction terminations.  The call
- * must never be used except when endpoint is not being used for any
- * protocol translation.
- */
-static inline void usb_ep_fifo_flush(struct usb_ep *ep)
-{
-	if (ep->ops->fifo_flush)
-		ep->ops->fifo_flush(ep);
-}
-
-
-/*-------------------------------------------------------------------------*/
-
-struct usb_dcd_config_params {
-	__u8  bU1devExitLat;	/* U1 Device exit Latency */
-#define USB_DEFAULT_U1_DEV_EXIT_LAT	0x01	/* Less then 1 microsec */
-	__le16 bU2DevExitLat;	/* U2 Device exit Latency */
-#define USB_DEFAULT_U2_DEV_EXIT_LAT	0x1F4	/* Less then 500 microsec */
-};
-
-
-struct usb_gadget;
-struct usb_gadget_driver;
-
-/* the rest of the api to the controller hardware: device operations,
- * which don't involve endpoints (or i/o).
- */
-struct usb_gadget_ops {
-	int	(*get_frame)(struct usb_gadget *);
-	int	(*wakeup)(struct usb_gadget *);
-	int	(*set_selfpowered) (struct usb_gadget *, int is_selfpowered);
-	int	(*vbus_session) (struct usb_gadget *, int is_active);
-	int	(*vbus_draw) (struct usb_gadget *, unsigned mA);
-	int	(*pullup) (struct usb_gadget *, int is_on);
-	int	(*ioctl)(struct usb_gadget *,
-				unsigned code, unsigned long param);
-	void	(*get_config_params)(struct usb_dcd_config_params *);
-	int	(*udc_start)(struct usb_gadget *,
-			struct usb_gadget_driver *);
-	int	(*udc_stop)(struct usb_gadget *,
-			struct usb_gadget_driver *);
-
-	/* Those two are deprecated */
-	int	(*start)(struct usb_gadget_driver *,
-			int (*bind)(struct usb_gadget *));
-	int	(*stop)(struct usb_gadget_driver *);
-};
-
-/**
- * struct usb_gadget - represents a usb slave device
- * @ops: Function pointers used to access hardware-specific operations.
- * @ep0: Endpoint zero, used when reading or writing responses to
- *	driver setup() requests
- * @ep_list: List of other endpoints supported by the device.
- * @speed: Speed of current connection to USB host.
- * @max_speed: Maximal speed the UDC can handle.  UDC must support this
- *      and all slower speeds.
- * @sg_supported: true if we can handle scatter-gather
- * @is_otg: True if the USB device port uses a Mini-AB jack, so that the
- *	gadget driver must provide a USB OTG descriptor.
- * @is_a_peripheral: False unless is_otg, the "A" end of a USB cable
- *	is in the Mini-AB jack, and HNP has been used to switch roles
- *	so that the "A" device currently acts as A-Peripheral, not A-Host.
- * @a_hnp_support: OTG device feature flag, indicating that the A-Host
- *	supports HNP at this port.
- * @a_alt_hnp_support: OTG device feature flag, indicating that the A-Host
- *	only supports HNP on a different root port.
- * @b_hnp_enable: OTG device feature flag, indicating that the A-Host
- *	enabled HNP support.
- * @name: Identifies the controller hardware type.  Used in diagnostics
- *	and sometimes configuration.
- * @dev: Driver model state for this abstract device.
- *
- * Gadgets have a mostly-portable "gadget driver" implementing device
- * functions, handling all usb configurations and interfaces.  Gadget
- * drivers talk to hardware-specific code indirectly, through ops vectors.
- * That insulates the gadget driver from hardware details, and packages
- * the hardware endpoints through generic i/o queues.  The "usb_gadget"
- * and "usb_ep" interfaces provide that insulation from the hardware.
- *
- * Except for the driver data, all fields in this structure are
- * read-only to the gadget driver.  That driver data is part of the
- * "driver model" infrastructure in 2.6 (and later) kernels, and for
- * earlier systems is grouped in a similar structure that's not known
- * to the rest of the kernel.
- *
- * Values of the three OTG device feature flags are updated before the
- * setup() call corresponding to USB_REQ_SET_CONFIGURATION, and before
- * driver suspend() calls.  They are valid only when is_otg, and when the
- * device is acting as a B-Peripheral (so is_a_peripheral is false).
- */
-struct usb_gadget {
-	/* readonly to gadget driver */
-	const struct usb_gadget_ops	*ops;
-	struct usb_ep			*ep0;
-	struct list_head		ep_list;	/* of usb_ep */
-	enum usb_device_speed		speed;
-	enum usb_device_speed		max_speed;
-	unsigned			sg_supported:1;
-	unsigned			is_otg:1;
-	unsigned			is_a_peripheral:1;
-	unsigned			b_hnp_enable:1;
-	unsigned			a_hnp_support:1;
-	unsigned			a_alt_hnp_support:1;
-	const char			*name;
-	struct device			dev;
-};
-
-static inline void set_gadget_data(struct usb_gadget *gadget, void *data)
-	{ dev_set_drvdata(&gadget->dev, data); }
-static inline void *get_gadget_data(struct usb_gadget *gadget)
-	{ return dev_get_drvdata(&gadget->dev); }
-static inline struct usb_gadget *dev_to_usb_gadget(struct device *dev)
-{
-	return container_of(dev, struct usb_gadget, dev);
-}
-
-/* iterates the non-control endpoints; 'tmp' is a struct usb_ep pointer */
-#define gadget_for_each_ep(tmp, gadget) \
-	list_for_each_entry(tmp, &(gadget)->ep_list, ep_list)
-
-
-/**
- * gadget_is_dualspeed - return true iff the hardware handles high speed
- * @g: controller that might support both high and full speeds
- */
-static inline int gadget_is_dualspeed(struct usb_gadget *g)
-{
-#ifdef CONFIG_USB_GADGET_DUALSPEED
-	/* runtime test would check "g->max_speed" ... that might be
-	 * useful to work around hardware bugs, but is mostly pointless
-	 */
-	return 1;
-#else
-	return 0;
-#endif
-}
-
-/**
- * gadget_is_superspeed() - return true if the hardware handles
- * supperspeed
- * @g: controller that might support supper speed
- */
-static inline int gadget_is_superspeed(struct usb_gadget *g)
-{
-#ifdef CONFIG_USB_GADGET_SUPERSPEED
-	/*
-	 * runtime test would check "g->max_speed" ... that might be
-	 * useful to work around hardware bugs, but is mostly pointless
-	 */
-	return 1;
-#else
-	return 0;
-#endif
-}
-
-/**
- * gadget_is_otg - return true iff the hardware is OTG-ready
- * @g: controller that might have a Mini-AB connector
- *
- * This is a runtime test, since kernels with a USB-OTG stack sometimes
- * run on boards which only have a Mini-B (or Mini-A) connector.
- */
-static inline int gadget_is_otg(struct usb_gadget *g)
-{
-#ifdef CONFIG_USB_OTG
-	return g->is_otg;
-#else
-	return 0;
-#endif
-}
-
-/**
- * usb_gadget_frame_number - returns the current frame number
- * @gadget: controller that reports the frame number
- *
- * Returns the usb frame number, normally eleven bits from a SOF packet,
- * or negative errno if this device doesn't support this capability.
- */
-static inline int usb_gadget_frame_number(struct usb_gadget *gadget)
-{
-	return gadget->ops->get_frame(gadget);
-}
-
-/**
- * usb_gadget_wakeup - tries to wake up the host connected to this gadget
- * @gadget: controller used to wake up the host
- *
- * Returns zero on success, else negative error code if the hardware
- * doesn't support such attempts, or its support has not been enabled
- * by the usb host.  Drivers must return device descriptors that report
- * their ability to support this, or hosts won't enable it.
- *
- * This may also try to use SRP to wake the host and start enumeration,
- * even if OTG isn't otherwise in use.  OTG devices may also start
- * remote wakeup even when hosts don't explicitly enable it.
- */
-static inline int usb_gadget_wakeup(struct usb_gadget *gadget)
-{
-	if (!gadget->ops->wakeup)
-		return -EOPNOTSUPP;
-	return gadget->ops->wakeup(gadget);
-}
-
-/**
- * usb_gadget_set_selfpowered - sets the device selfpowered feature.
- * @gadget:the device being declared as self-powered
- *
- * this affects the device status reported by the hardware driver
- * to reflect that it now has a local power supply.
- *
- * returns zero on success, else negative errno.
- */
-static inline int usb_gadget_set_selfpowered(struct usb_gadget *gadget)
-{
-	if (!gadget->ops->set_selfpowered)
-		return -EOPNOTSUPP;
-	return gadget->ops->set_selfpowered(gadget, 1);
-}
-
-/**
- * usb_gadget_clear_selfpowered - clear the device selfpowered feature.
- * @gadget:the device being declared as bus-powered
- *
- * this affects the device status reported by the hardware driver.
- * some hardware may not support bus-powered operation, in which
- * case this feature's value can never change.
- *
- * returns zero on success, else negative errno.
- */
-static inline int usb_gadget_clear_selfpowered(struct usb_gadget *gadget)
-{
-	if (!gadget->ops->set_selfpowered)
-		return -EOPNOTSUPP;
-	return gadget->ops->set_selfpowered(gadget, 0);
-}
-
-/**
- * usb_gadget_vbus_connect - Notify controller that VBUS is powered
- * @gadget:The device which now has VBUS power.
- * Context: can sleep
- *
- * This call is used by a driver for an external transceiver (or GPIO)
- * that detects a VBUS power session starting.  Common responses include
- * resuming the controller, activating the D+ (or D-) pullup to let the
- * host detect that a USB device is attached, and starting to draw power
- * (8mA or possibly more, especially after SET_CONFIGURATION).
- *
- * Returns zero on success, else negative errno.
- */
-static inline int usb_gadget_vbus_connect(struct usb_gadget *gadget)
-{
-	if (!gadget->ops->vbus_session)
-		return -EOPNOTSUPP;
-	return gadget->ops->vbus_session(gadget, 1);
-}
-
-/**
- * usb_gadget_vbus_draw - constrain controller's VBUS power usage
- * @gadget:The device whose VBUS usage is being described
- * @mA:How much current to draw, in milliAmperes.  This should be twice
- *	the value listed in the configuration descriptor bMaxPower field.
- *
- * This call is used by gadget drivers during SET_CONFIGURATION calls,
- * reporting how much power the device may consume.  For example, this
- * could affect how quickly batteries are recharged.
- *
- * Returns zero on success, else negative errno.
- */
-static inline int usb_gadget_vbus_draw(struct usb_gadget *gadget, unsigned mA)
-{
-	if (!gadget->ops->vbus_draw)
-		return -EOPNOTSUPP;
-	return gadget->ops->vbus_draw(gadget, mA);
-}
-
-/**
- * usb_gadget_vbus_disconnect - notify controller about VBUS session end
- * @gadget:the device whose VBUS supply is being described
- * Context: can sleep
- *
- * This call is used by a driver for an external transceiver (or GPIO)
- * that detects a VBUS power session ending.  Common responses include
- * reversing everything done in usb_gadget_vbus_connect().
- *
- * Returns zero on success, else negative errno.
- */
-static inline int usb_gadget_vbus_disconnect(struct usb_gadget *gadget)
-{
-	if (!gadget->ops->vbus_session)
-		return -EOPNOTSUPP;
-	return gadget->ops->vbus_session(gadget, 0);
-}
-
-/**
- * usb_gadget_connect - software-controlled connect to USB host
- * @gadget:the peripheral being connected
- *
- * Enables the D+ (or potentially D-) pullup.  The host will start
- * enumerating this gadget when the pullup is active and a VBUS session
- * is active (the link is powered).  This pullup is always enabled unless
- * usb_gadget_disconnect() has been used to disable it.
- *
- * Returns zero on success, else negative errno.
- */
-static inline int usb_gadget_connect(struct usb_gadget *gadget)
-{
-	if (!gadget->ops->pullup)
-		return -EOPNOTSUPP;
-	return gadget->ops->pullup(gadget, 1);
-}
-
-/**
- * usb_gadget_disconnect - software-controlled disconnect from USB host
- * @gadget:the peripheral being disconnected
- *
- * Disables the D+ (or potentially D-) pullup, which the host may see
- * as a disconnect (when a VBUS session is active).  Not all systems
- * support software pullup controls.
- *
- * This routine may be used during the gadget driver bind() call to prevent
- * the peripheral from ever being visible to the USB host, unless later
- * usb_gadget_connect() is called.  For example, user mode components may
- * need to be activated before the system can talk to hosts.
- *
- * Returns zero on success, else negative errno.
- */
-static inline int usb_gadget_disconnect(struct usb_gadget *gadget)
-{
-	if (!gadget->ops->pullup)
-		return -EOPNOTSUPP;
-	return gadget->ops->pullup(gadget, 0);
-}
-
-
-/*-------------------------------------------------------------------------*/
-
-/**
- * struct usb_gadget_driver - driver for usb 'slave' devices
- * @function: String describing the gadget's function
- * @max_speed: Highest speed the driver handles.
- * @setup: Invoked for ep0 control requests that aren't handled by
- *	the hardware level driver. Most calls must be handled by
- *	the gadget driver, including descriptor and configuration
- *	management.  The 16 bit members of the setup data are in
- *	USB byte order. Called in_interrupt; this may not sleep.  Driver
- *	queues a response to ep0, or returns negative to stall.
- * @disconnect: Invoked after all transfers have been stopped,
- *	when the host is disconnected.  May be called in_interrupt; this
- *	may not sleep.  Some devices can't detect disconnect, so this might
- *	not be called except as part of controller shutdown.
- * @unbind: Invoked when the driver is unbound from a gadget,
- *	usually from rmmod (after a disconnect is reported).
- *	Called in a context that permits sleeping.
- * @suspend: Invoked on USB suspend.  May be called in_interrupt.
- * @resume: Invoked on USB resume.  May be called in_interrupt.
- * @driver: Driver model state for this driver.
- *
- * Devices are disabled till a gadget driver successfully bind()s, which
- * means the driver will handle setup() requests needed to enumerate (and
- * meet "chapter 9" requirements) then do some useful work.
- *
- * If gadget->is_otg is true, the gadget driver must provide an OTG
- * descriptor during enumeration, or else fail the bind() call.  In such
- * cases, no USB traffic may flow until both bind() returns without
- * having called usb_gadget_disconnect(), and the USB host stack has
- * initialized.
- *
- * Drivers use hardware-specific knowledge to configure the usb hardware.
- * endpoint addressing is only one of several hardware characteristics that
- * are in descriptors the ep0 implementation returns from setup() calls.
- *
- * Except for ep0 implementation, most driver code shouldn't need change to
- * run on top of different usb controllers.  It'll use endpoints set up by
- * that ep0 implementation.
- *
- * The usb controller driver handles a few standard usb requests.  Those
- * include set_address, and feature flags for devices, interfaces, and
- * endpoints (the get_status, set_feature, and clear_feature requests).
- *
- * Accordingly, the driver's setup() callback must always implement all
- * get_descriptor requests, returning at least a device descriptor and
- * a configuration descriptor.  Drivers must make sure the endpoint
- * descriptors match any hardware constraints. Some hardware also constrains
- * other descriptors. (The pxa250 allows only configurations 1, 2, or 3).
- *
- * The driver's setup() callback must also implement set_configuration,
- * and should also implement set_interface, get_configuration, and
- * get_interface.  Setting a configuration (or interface) is where
- * endpoints should be activated or (config 0) shut down.
- *
- * (Note that only the default control endpoint is supported.  Neither
- * hosts nor devices generally support control traffic except to ep0.)
- *
- * Most devices will ignore USB suspend/resume operations, and so will
- * not provide those callbacks.  However, some may need to change modes
- * when the host is not longer directing those activities.  For example,
- * local controls (buttons, dials, etc) may need to be re-enabled since
- * the (remote) host can't do that any longer; or an error state might
- * be cleared, to make the device behave identically whether or not
- * power is maintained.
- */
-struct usb_gadget_driver {
-	char			*function;
-	enum usb_device_speed	max_speed;
-	void			(*unbind)(struct usb_gadget *);
-	int			(*setup)(struct usb_gadget *,
-					const struct usb_ctrlrequest *);
-	void			(*disconnect)(struct usb_gadget *);
-	void			(*suspend)(struct usb_gadget *);
-	void			(*resume)(struct usb_gadget *);
-
-	/* FIXME support safe rmmod */
-	struct device_driver	driver;
-};
-
-
-
-/*-------------------------------------------------------------------------*/
-
-/* driver modules register and unregister, as usual.
- * these calls must be made in a context that can sleep.
- *
- * these will usually be implemented directly by the hardware-dependent
- * usb bus interface driver, which will only support a single driver.
- */
-
-/**
- * usb_gadget_probe_driver - probe a gadget driver
- * @driver: the driver being registered
- * @bind: the driver's bind callback
- * Context: can sleep
- *
- * Call this in your gadget driver's module initialization function,
- * to tell the underlying usb controller driver about your driver.
- * The @bind() function will be called to bind it to a gadget before this
- * registration call returns.  It's expected that the @bind() function will
- * be in init sections.
- */
-int usb_gadget_probe_driver(struct usb_gadget_driver *driver,
-		int (*bind)(struct usb_gadget *));
-
-/**
- * usb_gadget_unregister_driver - unregister a gadget driver
- * @driver:the driver being unregistered
- * Context: can sleep
- *
- * Call this in your gadget driver's module cleanup function,
- * to tell the underlying usb controller that your driver is
- * going away.  If the controller is connected to a USB host,
- * it will first disconnect().  The driver is also requested
- * to unbind() and clean up any device state, before this procedure
- * finally returns.  It's expected that the unbind() functions
- * will in in exit sections, so may not be linked in some kernels.
- */
-int usb_gadget_unregister_driver(struct usb_gadget_driver *driver);
-
-extern int usb_add_gadget_udc(struct device *parent, struct usb_gadget *gadget);
-extern void usb_del_gadget_udc(struct usb_gadget *gadget);
-
-/*-------------------------------------------------------------------------*/
-
-/* utility to simplify dealing with string descriptors */
-
-/**
- * struct usb_string - wraps a C string and its USB id
- * @id:the (nonzero) ID for this string
- * @s:the string, in UTF-8 encoding
- *
- * If you're using usb_gadget_get_string(), use this to wrap a string
- * together with its ID.
- */
-struct usb_string {
-	u8			id;
-	const char		*s;
-};
-
-/**
- * struct usb_gadget_strings - a set of USB strings in a given language
- * @language:identifies the strings' language (0x0409 for en-us)
- * @strings:array of strings with their ids
- *
- * If you're using usb_gadget_get_string(), use this to wrap all the
- * strings for a given language.
- */
-struct usb_gadget_strings {
-	u16			language;	/* 0x0409 for en-us */
-	struct usb_string	*strings;
-};
-
-/* put descriptor for string with that id into buf (buflen >= 256) */
-int usb_gadget_get_string(struct usb_gadget_strings *table, int id, u8 *buf);
-
-/*-------------------------------------------------------------------------*/
-
-/* utility to simplify managing config descriptors */
-
-/* write vector of descriptors into buffer */
-int usb_descriptor_fillbuf(void *, unsigned,
-		const struct usb_descriptor_header **);
-
-/* build config descriptor from single descriptor vector */
-int usb_gadget_config_buf(const struct usb_config_descriptor *config,
-	void *buf, unsigned buflen, const struct usb_descriptor_header **desc);
-
-/* copy a NULL-terminated vector of descriptors */
-struct usb_descriptor_header **usb_copy_descriptors(
-		struct usb_descriptor_header **);
-
-/**
- * usb_free_descriptors - free descriptors returned by usb_copy_descriptors()
- * @v: vector of descriptors
- */
-static inline void usb_free_descriptors(struct usb_descriptor_header **v)
-{
-	kfree(v);
-}
-
-/*-------------------------------------------------------------------------*/
-
-/* utility to simplify map/unmap of usb_requests to/from DMA */
-
-extern int usb_gadget_map_request(struct usb_gadget *gadget,
-		struct usb_request *req, int is_in);
-
-extern void usb_gadget_unmap_request(struct usb_gadget *gadget,
-		struct usb_request *req, int is_in);
-
-/*-------------------------------------------------------------------------*/
-
-/* utility wrapping a simple endpoint selection policy */
-
-extern struct usb_ep *usb_ep_autoconfig(struct usb_gadget *,
-			struct usb_endpoint_descriptor *);
-
-
-extern struct usb_ep *usb_ep_autoconfig_ss(struct usb_gadget *,
-			struct usb_endpoint_descriptor *,
-			struct usb_ss_ep_comp_descriptor *);
-
-extern void usb_ep_autoconfig_reset(struct usb_gadget *);
-
-#endif /* __LINUX_USB_GADGET_H */
diff --git a/ANDROID_3.4.5/include/linux/usb/gadgetfs.h b/ANDROID_3.4.5/include/linux/usb/gadgetfs.h
deleted file mode 100644
index 0bb12e0d..00000000
--- a/ANDROID_3.4.5/include/linux/usb/gadgetfs.h
+++ /dev/null
@@ -1,88 +0,0 @@
-/*
- * Filesystem based user-mode API to USB Gadget controller hardware
- *
- * Other than ep0 operations, most things are done by read() and write()
- * on endpoint files found in one directory.  They are configured by
- * writing descriptors, and then may be used for normal stream style
- * i/o requests.  When ep0 is configured, the device can enumerate;
- * when it's closed, the device disconnects from usb.  Operations on
- * ep0 require ioctl() operations.
- *
- * Configuration and device descriptors get written to /dev/gadget/$CHIP,
- * which may then be used to read usb_gadgetfs_event structs.  The driver
- * may activate endpoints as it handles SET_CONFIGURATION setup events,
- * or earlier; writing endpoint descriptors to /dev/gadget/$ENDPOINT
- * then performing data transfers by reading or writing.
- */
-
-#ifndef __LINUX_USB_GADGETFS_H
-#define __LINUX_USB_GADGETFS_H
-
-#include <linux/types.h>
-#include <linux/ioctl.h>
-
-#include <linux/usb/ch9.h>
-
-/*
- * Events are delivered on the ep0 file descriptor, when the user mode driver
- * reads from this file descriptor after writing the descriptors.  Don't
- * stop polling this descriptor.
- */
-
-enum usb_gadgetfs_event_type {
-	GADGETFS_NOP = 0,
-
-	GADGETFS_CONNECT,
-	GADGETFS_DISCONNECT,
-	GADGETFS_SETUP,
-	GADGETFS_SUSPEND,
-	/* and likely more ! */
-};
-
-/* NOTE:  this structure must stay the same size and layout on
- * both 32-bit and 64-bit kernels.
- */
-struct usb_gadgetfs_event {
-	union {
-		/* NOP, DISCONNECT, SUSPEND: nothing
-		 * ... some hardware can't report disconnection
-		 */
-
-		/* CONNECT: just the speed */
-		enum usb_device_speed	speed;
-
-		/* SETUP: packet; DATA phase i/o precedes next event
-		 *(setup.bmRequestType & USB_DIR_IN) flags direction
-		 * ... includes SET_CONFIGURATION, SET_INTERFACE
-		 */
-		struct usb_ctrlrequest	setup;
-	} u;
-	enum usb_gadgetfs_event_type	type;
-};
-
-
-/* The 'g' code is also used by printer gadget ioctl requests.
- * Don't add any colliding codes to either driver, and keep
- * them in unique ranges (size 0x20 for now).
- */
-
-/* endpoint ioctls */
-
-/* IN transfers may be reported to the gadget driver as complete
- *	when the fifo is loaded, before the host reads the data;
- * OUT transfers may be reported to the host's "client" driver as
- *	complete when they're sitting in the FIFO unread.
- * THIS returns how many bytes are "unclaimed" in the endpoint fifo
- * (needed for precise fault handling, when the hardware allows it)
- */
-#define	GADGETFS_FIFO_STATUS	_IO('g', 1)
-
-/* discards any unclaimed data in the fifo. */
-#define	GADGETFS_FIFO_FLUSH	_IO('g', 2)
-
-/* resets endpoint halt+toggle; used to implement set_interface.
- * some hardware (like pxa2xx) can't support this.
- */
-#define	GADGETFS_CLEAR_HALT	_IO('g', 3)
-
-#endif /* __LINUX_USB_GADGETFS_H */
diff --git a/ANDROID_3.4.5/include/linux/usb/gpio_vbus.h b/ANDROID_3.4.5/include/linux/usb/gpio_vbus.h
deleted file mode 100644
index d9f03ccc..00000000
--- a/ANDROID_3.4.5/include/linux/usb/gpio_vbus.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
- * A simple GPIO VBUS sensing driver for B peripheral only devices
- * with internal transceivers.
- * Optionally D+ pullup can be controlled by a second GPIO.
- *
- * Copyright (c) 2008 Philipp Zabel <philipp.zabel@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-/**
- * struct gpio_vbus_mach_info - configuration for gpio_vbus
- * @gpio_vbus: VBUS sensing GPIO
- * @gpio_pullup: optional D+ or D- pullup GPIO (else negative/invalid)
- * @gpio_vbus_inverted: true if gpio_vbus is active low
- * @gpio_pullup_inverted: true if gpio_pullup is active low
- *
- * The VBUS sensing GPIO should have a pulldown, which will normally be
- * part of a resistor ladder turning a 4.0V-5.25V level on VBUS into a
- * value the GPIO detects as active.  Some systems will use comparators.
- */
-struct gpio_vbus_mach_info {
-	int gpio_vbus;
-	int gpio_pullup;
-	bool gpio_vbus_inverted;
-	bool gpio_pullup_inverted;
-};
diff --git a/ANDROID_3.4.5/include/linux/usb/hcd.h b/ANDROID_3.4.5/include/linux/usb/hcd.h
deleted file mode 100644
index 030f3610..00000000
--- a/ANDROID_3.4.5/include/linux/usb/hcd.h
+++ /dev/null
@@ -1,696 +0,0 @@
-/*
- * Copyright (c) 2001-2002 by David Brownell
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- * for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software Foundation,
- * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __USB_CORE_HCD_H
-#define __USB_CORE_HCD_H
-
-#ifdef __KERNEL__
-
-#include <linux/rwsem.h>
-
-#define MAX_TOPO_LEVEL		6
-
-/* This file contains declarations of usbcore internals that are mostly
- * used or exposed by Host Controller Drivers.
- */
-
-/*
- * USB Packet IDs (PIDs)
- */
-#define USB_PID_EXT			0xf0	/* USB 2.0 LPM ECN */
-#define USB_PID_OUT			0xe1
-#define USB_PID_ACK			0xd2
-#define USB_PID_DATA0			0xc3
-#define USB_PID_PING			0xb4	/* USB 2.0 */
-#define USB_PID_SOF			0xa5
-#define USB_PID_NYET			0x96	/* USB 2.0 */
-#define USB_PID_DATA2			0x87	/* USB 2.0 */
-#define USB_PID_SPLIT			0x78	/* USB 2.0 */
-#define USB_PID_IN			0x69
-#define USB_PID_NAK			0x5a
-#define USB_PID_DATA1			0x4b
-#define USB_PID_PREAMBLE		0x3c	/* Token mode */
-#define USB_PID_ERR			0x3c	/* USB 2.0: handshake mode */
-#define USB_PID_SETUP			0x2d
-#define USB_PID_STALL			0x1e
-#define USB_PID_MDATA			0x0f	/* USB 2.0 */
-
-/*-------------------------------------------------------------------------*/
-
-/*
- * USB Host Controller Driver (usb_hcd) framework
- *
- * Since "struct usb_bus" is so thin, you can't share much code in it.
- * This framework is a layer over that, and should be more sharable.
- *
- * @authorized_default: Specifies if new devices are authorized to
- *                      connect by default or they require explicit
- *                      user space authorization; this bit is settable
- *                      through /sys/class/usb_host/X/authorized_default.
- *                      For the rest is RO, so we don't lock to r/w it.
- */
-
-/*-------------------------------------------------------------------------*/
-
-struct usb_hcd {
-
-	/*
-	 * housekeeping
-	 */
-	struct usb_bus		self;		/* hcd is-a bus */
-	struct kref		kref;		/* reference counter */
-
-	const char		*product_desc;	/* product/vendor string */
-	int			speed;		/* Speed for this roothub.
-						 * May be different from
-						 * hcd->driver->flags & HCD_MASK
-						 */
-	char			irq_descr[24];	/* driver + bus # */
-
-	struct timer_list	rh_timer;	/* drives root-hub polling */
-	struct urb		*status_urb;	/* the current status urb */
-#ifdef CONFIG_USB_SUSPEND
-	struct work_struct	wakeup_work;	/* for remote wakeup */
-#endif
-
-	/*
-	 * hardware info/state
-	 */
-	const struct hc_driver	*driver;	/* hw-specific hooks */
-
-	/* Flags that need to be manipulated atomically because they can
-	 * change while the host controller is running.  Always use
-	 * set_bit() or clear_bit() to change their values.
-	 */
-	unsigned long		flags;
-#define HCD_FLAG_HW_ACCESSIBLE		0	/* at full power */
-#define HCD_FLAG_POLL_RH		2	/* poll for rh status? */
-#define HCD_FLAG_POLL_PENDING		3	/* status has changed? */
-#define HCD_FLAG_WAKEUP_PENDING		4	/* root hub is resuming? */
-#define HCD_FLAG_RH_RUNNING		5	/* root hub is running? */
-#define HCD_FLAG_DEAD			6	/* controller has died? */
-
-	/* The flags can be tested using these macros; they are likely to
-	 * be slightly faster than test_bit().
-	 */
-#define HCD_HW_ACCESSIBLE(hcd)	((hcd)->flags & (1U << HCD_FLAG_HW_ACCESSIBLE))
-#define HCD_POLL_RH(hcd)	((hcd)->flags & (1U << HCD_FLAG_POLL_RH))
-#define HCD_POLL_PENDING(hcd)	((hcd)->flags & (1U << HCD_FLAG_POLL_PENDING))
-#define HCD_WAKEUP_PENDING(hcd)	((hcd)->flags & (1U << HCD_FLAG_WAKEUP_PENDING))
-#define HCD_RH_RUNNING(hcd)	((hcd)->flags & (1U << HCD_FLAG_RH_RUNNING))
-#define HCD_DEAD(hcd)		((hcd)->flags & (1U << HCD_FLAG_DEAD))
-
-	/* Flags that get set only during HCD registration or removal. */
-	unsigned		rh_registered:1;/* is root hub registered? */
-	unsigned		rh_pollable:1;	/* may we poll the root hub? */
-	unsigned		msix_enabled:1;	/* driver has MSI-X enabled? */
-
-	/* The next flag is a stopgap, to be removed when all the HCDs
-	 * support the new root-hub polling mechanism. */
-	unsigned		uses_new_polling:1;
-	unsigned		wireless:1;	/* Wireless USB HCD */
-	unsigned		authorized_default:1;
-	unsigned		has_tt:1;	/* Integrated TT in root hub */
-
-	unsigned int		irq;		/* irq allocated */
-	void __iomem		*regs;		/* device memory/io */
-	u64			rsrc_start;	/* memory/io resource start */
-	u64			rsrc_len;	/* memory/io resource length */
-	unsigned		power_budget;	/* in mA, 0 = no limit */
-
-	/* bandwidth_mutex should be taken before adding or removing
-	 * any new bus bandwidth constraints:
-	 *   1. Before adding a configuration for a new device.
-	 *   2. Before removing the configuration to put the device into
-	 *      the addressed state.
-	 *   3. Before selecting a different configuration.
-	 *   4. Before selecting an alternate interface setting.
-	 *
-	 * bandwidth_mutex should be dropped after a successful control message
-	 * to the device, or resetting the bandwidth after a failed attempt.
-	 */
-	struct mutex		*bandwidth_mutex;
-	struct usb_hcd		*shared_hcd;
-	struct usb_hcd		*primary_hcd;
-
-
-#define HCD_BUFFER_POOLS	4
-	struct dma_pool		*pool[HCD_BUFFER_POOLS];
-
-	int			state;
-#	define	__ACTIVE		0x01
-#	define	__SUSPEND		0x04
-#	define	__TRANSIENT		0x80
-
-#	define	HC_STATE_HALT		0
-#	define	HC_STATE_RUNNING	(__ACTIVE)
-#	define	HC_STATE_QUIESCING	(__SUSPEND|__TRANSIENT|__ACTIVE)
-#	define	HC_STATE_RESUMING	(__SUSPEND|__TRANSIENT)
-#	define	HC_STATE_SUSPENDED	(__SUSPEND)
-
-#define	HC_IS_RUNNING(state) ((state) & __ACTIVE)
-#define	HC_IS_SUSPENDED(state) ((state) & __SUSPEND)
-
-	/* more shared queuing code would be good; it should support
-	 * smarter scheduling, handle transaction translators, etc;
-	 * input size of periodic table to an interrupt scheduler.
-	 * (ohci 32, uhci 1024, ehci 256/512/1024).
-	 */
-
-	/* The HC driver's private data is stored at the end of
-	 * this structure.
-	 */
-	unsigned long hcd_priv[0]
-			__attribute__ ((aligned(sizeof(s64))));
-};
-
-/* 2.4 does this a bit differently ... */
-static inline struct usb_bus *hcd_to_bus(struct usb_hcd *hcd)
-{
-	return &hcd->self;
-}
-
-static inline struct usb_hcd *bus_to_hcd(struct usb_bus *bus)
-{
-	return container_of(bus, struct usb_hcd, self);
-}
-
-struct hcd_timeout {	/* timeouts we allocate */
-	struct list_head	timeout_list;
-	struct timer_list	timer;
-};
-
-/*-------------------------------------------------------------------------*/
-
-
-struct hc_driver {
-	const char	*description;	/* "ehci-hcd" etc */
-	const char	*product_desc;	/* product/vendor string */
-	size_t		hcd_priv_size;	/* size of private data */
-
-	/* irq handler */
-	irqreturn_t	(*irq) (struct usb_hcd *hcd);
-
-	int	flags;
-#define	HCD_MEMORY	0x0001		/* HC regs use memory (else I/O) */
-#define	HCD_LOCAL_MEM	0x0002		/* HC needs local memory */
-#define	HCD_SHARED	0x0004		/* Two (or more) usb_hcds share HW */
-#define	HCD_USB11	0x0010		/* USB 1.1 */
-#define	HCD_USB2	0x0020		/* USB 2.0 */
-#define	HCD_USB3	0x0040		/* USB 3.0 */
-#define	HCD_MASK	0x0070
-
-	/* called to init HCD and root hub */
-	int	(*reset) (struct usb_hcd *hcd);
-	int	(*start) (struct usb_hcd *hcd);
-
-	/* NOTE:  these suspend/resume calls relate to the HC as
-	 * a whole, not just the root hub; they're for PCI bus glue.
-	 */
-	/* called after suspending the hub, before entering D3 etc */
-	int	(*pci_suspend)(struct usb_hcd *hcd, bool do_wakeup);
-
-	/* called after entering D0 (etc), before resuming the hub */
-	int	(*pci_resume)(struct usb_hcd *hcd, bool hibernated);
-
-	/* cleanly make HCD stop writing memory and doing I/O */
-	void	(*stop) (struct usb_hcd *hcd);
-
-	/* shutdown HCD */
-	void	(*shutdown) (struct usb_hcd *hcd);
-
-	/* return current frame number */
-	int	(*get_frame_number) (struct usb_hcd *hcd);
-
-	/* manage i/o requests, device state */
-	int	(*urb_enqueue)(struct usb_hcd *hcd,
-				struct urb *urb, gfp_t mem_flags);
-	int	(*urb_dequeue)(struct usb_hcd *hcd,
-				struct urb *urb, int status);
-
-	/*
-	 * (optional) these hooks allow an HCD to override the default DMA
-	 * mapping and unmapping routines.  In general, they shouldn't be
-	 * necessary unless the host controller has special DMA requirements,
-	 * such as alignment contraints.  If these are not specified, the
-	 * general usb_hcd_(un)?map_urb_for_dma functions will be used instead
-	 * (and it may be a good idea to call these functions in your HCD
-	 * implementation)
-	 */
-	int	(*map_urb_for_dma)(struct usb_hcd *hcd, struct urb *urb,
-				   gfp_t mem_flags);
-	void    (*unmap_urb_for_dma)(struct usb_hcd *hcd, struct urb *urb);
-
-	/* hw synch, freeing endpoint resources that urb_dequeue can't */
-	void	(*endpoint_disable)(struct usb_hcd *hcd,
-			struct usb_host_endpoint *ep);
-
-	/* (optional) reset any endpoint state such as sequence number
-	   and current window */
-	void	(*endpoint_reset)(struct usb_hcd *hcd,
-			struct usb_host_endpoint *ep);
-
-	/* root hub support */
-	int	(*hub_status_data) (struct usb_hcd *hcd, char *buf);
-	int	(*hub_control) (struct usb_hcd *hcd,
-				u16 typeReq, u16 wValue, u16 wIndex,
-				char *buf, u16 wLength);
-	int	(*bus_suspend)(struct usb_hcd *);
-	int	(*bus_resume)(struct usb_hcd *);
-	int	(*start_port_reset)(struct usb_hcd *, unsigned port_num);
-
-		/* force handover of high-speed port to full-speed companion */
-	void	(*relinquish_port)(struct usb_hcd *, int);
-		/* has a port been handed over to a companion? */
-	int	(*port_handed_over)(struct usb_hcd *, int);
-
-		/* CLEAR_TT_BUFFER completion callback */
-	void	(*clear_tt_buffer_complete)(struct usb_hcd *,
-				struct usb_host_endpoint *);
-
-	/* xHCI specific functions */
-		/* Called by usb_alloc_dev to alloc HC device structures */
-	int	(*alloc_dev)(struct usb_hcd *, struct usb_device *);
-		/* Called by usb_disconnect to free HC device structures */
-	void	(*free_dev)(struct usb_hcd *, struct usb_device *);
-	/* Change a group of bulk endpoints to support multiple stream IDs */
-	int	(*alloc_streams)(struct usb_hcd *hcd, struct usb_device *udev,
-		struct usb_host_endpoint **eps, unsigned int num_eps,
-		unsigned int num_streams, gfp_t mem_flags);
-	/* Reverts a group of bulk endpoints back to not using stream IDs.
-	 * Can fail if we run out of memory.
-	 */
-	int	(*free_streams)(struct usb_hcd *hcd, struct usb_device *udev,
-		struct usb_host_endpoint **eps, unsigned int num_eps,
-		gfp_t mem_flags);
-
-	/* Bandwidth computation functions */
-	/* Note that add_endpoint() can only be called once per endpoint before
-	 * check_bandwidth() or reset_bandwidth() must be called.
-	 * drop_endpoint() can only be called once per endpoint also.
-	 * A call to xhci_drop_endpoint() followed by a call to
-	 * xhci_add_endpoint() will add the endpoint to the schedule with
-	 * possibly new parameters denoted by a different endpoint descriptor
-	 * in usb_host_endpoint.  A call to xhci_add_endpoint() followed by a
-	 * call to xhci_drop_endpoint() is not allowed.
-	 */
-		/* Allocate endpoint resources and add them to a new schedule */
-	int	(*add_endpoint)(struct usb_hcd *, struct usb_device *,
-				struct usb_host_endpoint *);
-		/* Drop an endpoint from a new schedule */
-	int	(*drop_endpoint)(struct usb_hcd *, struct usb_device *,
-				 struct usb_host_endpoint *);
-		/* Check that a new hardware configuration, set using
-		 * endpoint_enable and endpoint_disable, does not exceed bus
-		 * bandwidth.  This must be called before any set configuration
-		 * or set interface requests are sent to the device.
-		 */
-	int	(*check_bandwidth)(struct usb_hcd *, struct usb_device *);
-		/* Reset the device schedule to the last known good schedule,
-		 * which was set from a previous successful call to
-		 * check_bandwidth().  This reverts any add_endpoint() and
-		 * drop_endpoint() calls since that last successful call.
-		 * Used for when a check_bandwidth() call fails due to resource
-		 * or bandwidth constraints.
-		 */
-	void	(*reset_bandwidth)(struct usb_hcd *, struct usb_device *);
-		/* Returns the hardware-chosen device address */
-	int	(*address_device)(struct usb_hcd *, struct usb_device *udev);
-		/* Notifies the HCD after a hub descriptor is fetched.
-		 * Will block.
-		 */
-	int	(*update_hub_device)(struct usb_hcd *, struct usb_device *hdev,
-			struct usb_tt *tt, gfp_t mem_flags);
-	int	(*reset_device)(struct usb_hcd *, struct usb_device *);
-		/* Notifies the HCD after a device is connected and its
-		 * address is set
-		 */
-	int	(*update_device)(struct usb_hcd *, struct usb_device *);
-	int	(*set_usb2_hw_lpm)(struct usb_hcd *, struct usb_device *, int);
-};
-
-extern int usb_hcd_link_urb_to_ep(struct usb_hcd *hcd, struct urb *urb);
-extern int usb_hcd_check_unlink_urb(struct usb_hcd *hcd, struct urb *urb,
-		int status);
-extern void usb_hcd_unlink_urb_from_ep(struct usb_hcd *hcd, struct urb *urb);
-
-extern int usb_hcd_submit_urb(struct urb *urb, gfp_t mem_flags);
-extern int usb_hcd_unlink_urb(struct urb *urb, int status);
-extern void usb_hcd_giveback_urb(struct usb_hcd *hcd, struct urb *urb,
-		int status);
-extern int usb_hcd_map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb,
-		gfp_t mem_flags);
-extern void usb_hcd_unmap_urb_setup_for_dma(struct usb_hcd *, struct urb *);
-extern void usb_hcd_unmap_urb_for_dma(struct usb_hcd *, struct urb *);
-extern void usb_hcd_flush_endpoint(struct usb_device *udev,
-		struct usb_host_endpoint *ep);
-extern void usb_hcd_disable_endpoint(struct usb_device *udev,
-		struct usb_host_endpoint *ep);
-extern void usb_hcd_reset_endpoint(struct usb_device *udev,
-		struct usb_host_endpoint *ep);
-extern void usb_hcd_synchronize_unlinks(struct usb_device *udev);
-extern int usb_hcd_alloc_bandwidth(struct usb_device *udev,
-		struct usb_host_config *new_config,
-		struct usb_host_interface *old_alt,
-		struct usb_host_interface *new_alt);
-extern int usb_hcd_get_frame_number(struct usb_device *udev);
-
-extern struct usb_hcd *usb_create_hcd(const struct hc_driver *driver,
-		struct device *dev, const char *bus_name);
-extern struct usb_hcd *usb_create_shared_hcd(const struct hc_driver *driver,
-		struct device *dev, const char *bus_name,
-		struct usb_hcd *shared_hcd);
-extern struct usb_hcd *usb_get_hcd(struct usb_hcd *hcd);
-extern void usb_put_hcd(struct usb_hcd *hcd);
-extern int usb_hcd_is_primary_hcd(struct usb_hcd *hcd);
-extern int usb_add_hcd(struct usb_hcd *hcd,
-		unsigned int irqnum, unsigned long irqflags);
-extern void usb_remove_hcd(struct usb_hcd *hcd);
-
-struct platform_device;
-extern void usb_hcd_platform_shutdown(struct platform_device *dev);
-
-#ifdef CONFIG_PCI
-struct pci_dev;
-struct pci_device_id;
-extern int usb_hcd_pci_probe(struct pci_dev *dev,
-				const struct pci_device_id *id);
-extern void usb_hcd_pci_remove(struct pci_dev *dev);
-extern void usb_hcd_pci_shutdown(struct pci_dev *dev);
-
-#ifdef CONFIG_PM_SLEEP
-extern const struct dev_pm_ops usb_hcd_pci_pm_ops;
-#endif
-#endif /* CONFIG_PCI */
-
-/* pci-ish (pdev null is ok) buffer alloc/mapping support */
-int hcd_buffer_create(struct usb_hcd *hcd);
-void hcd_buffer_destroy(struct usb_hcd *hcd);
-
-void *hcd_buffer_alloc(struct usb_bus *bus, size_t size,
-	gfp_t mem_flags, dma_addr_t *dma);
-void hcd_buffer_free(struct usb_bus *bus, size_t size,
-	void *addr, dma_addr_t dma);
-
-/* generic bus glue, needed for host controllers that don't use PCI */
-extern irqreturn_t usb_hcd_irq(int irq, void *__hcd);
-
-extern void usb_hc_died(struct usb_hcd *hcd);
-extern void usb_hcd_poll_rh_status(struct usb_hcd *hcd);
-extern void usb_wakeup_notification(struct usb_device *hdev,
-		unsigned int portnum);
-
-/* The D0/D1 toggle bits ... USE WITH CAUTION (they're almost hcd-internal) */
-#define usb_gettoggle(dev, ep, out) (((dev)->toggle[out] >> (ep)) & 1)
-#define	usb_dotoggle(dev, ep, out)  ((dev)->toggle[out] ^= (1 << (ep)))
-#define usb_settoggle(dev, ep, out, bit) \
-		((dev)->toggle[out] = ((dev)->toggle[out] & ~(1 << (ep))) | \
-		 ((bit) << (ep)))
-
-/* -------------------------------------------------------------------------- */
-
-/* Enumeration is only for the hub driver, or HCD virtual root hubs */
-extern struct usb_device *usb_alloc_dev(struct usb_device *parent,
-					struct usb_bus *, unsigned port);
-extern int usb_new_device(struct usb_device *dev);
-extern void usb_disconnect(struct usb_device **);
-
-extern int usb_get_configuration(struct usb_device *dev);
-extern void usb_destroy_configuration(struct usb_device *dev);
-
-/*-------------------------------------------------------------------------*/
-
-/*
- * HCD Root Hub support
- */
-
-#include <linux/usb/ch11.h>
-
-/*
- * As of USB 2.0, full/low speed devices are segregated into trees.
- * One type grows from USB 1.1 host controllers (OHCI, UHCI etc).
- * The other type grows from high speed hubs when they connect to
- * full/low speed devices using "Transaction Translators" (TTs).
- *
- * TTs should only be known to the hub driver, and high speed bus
- * drivers (only EHCI for now).  They affect periodic scheduling and
- * sometimes control/bulk error recovery.
- */
-
-struct usb_device;
-
-struct usb_tt {
-	struct usb_device	*hub;	/* upstream highspeed hub */
-	int			multi;	/* true means one TT per port */
-	unsigned		think_time;	/* think time in ns */
-
-	/* for control/bulk error recovery (CLEAR_TT_BUFFER) */
-	spinlock_t		lock;
-	struct list_head	clear_list;	/* of usb_tt_clear */
-	struct work_struct	clear_work;
-};
-
-struct usb_tt_clear {
-	struct list_head	clear_list;
-	unsigned		tt;
-	u16			devinfo;
-	struct usb_hcd		*hcd;
-	struct usb_host_endpoint	*ep;
-};
-
-extern int usb_hub_clear_tt_buffer(struct urb *urb);
-extern void usb_ep0_reinit(struct usb_device *);
-
-/*{CharlesTu, 2010.08.26, for test mode */
-#define USB_PORT_FEAT_INDICATOR         22
-
-/* 
- * Hub Port Test Mode Selector Codes
- * See USB 2.0 spec Table 11-24
- */
-#define USB_PORT_TEST_J				0x01
-#define USB_PORT_TEST_K				0x02
-#define USB_PORT_TEST_SE0_NAK			0x03
-#define USB_PORT_TEST_PACKET			0x04
-#define USB_PORT_TEST_FORCE_ENABLE		0x05
-
-/*
- * This is used for the Hi-Speed Host Electrical Tests
- * on the root hub. See USB 2.0 spec 7.1.20 and the
- * Embedded High-speed Host Electrical Test Procedure.
- */
-#define USB_PORT_TEST_SINGLE_STEP_SET_FEATURE	0x00
-/*CharelsTu} */
-
-/* (shifted) direction/type/recipient from the USB 2.0 spec, table 9.2 */
-#define DeviceRequest \
-	((USB_DIR_IN|USB_TYPE_STANDARD|USB_RECIP_DEVICE)<<8)
-#define DeviceOutRequest \
-	((USB_DIR_OUT|USB_TYPE_STANDARD|USB_RECIP_DEVICE)<<8)
-
-#define InterfaceRequest \
-	((USB_DIR_IN|USB_TYPE_STANDARD|USB_RECIP_INTERFACE)<<8)
-
-#define EndpointRequest \
-	((USB_DIR_IN|USB_TYPE_STANDARD|USB_RECIP_INTERFACE)<<8)
-#define EndpointOutRequest \
-	((USB_DIR_OUT|USB_TYPE_STANDARD|USB_RECIP_INTERFACE)<<8)
-
-/* class requests from the USB 2.0 hub spec, table 11-15 */
-/* GetBusState and SetHubDescriptor are optional, omitted */
-#define ClearHubFeature		(0x2000 | USB_REQ_CLEAR_FEATURE)
-#define ClearPortFeature	(0x2300 | USB_REQ_CLEAR_FEATURE)
-#define GetHubDescriptor	(0xa000 | USB_REQ_GET_DESCRIPTOR)
-#define GetHubStatus		(0xa000 | USB_REQ_GET_STATUS)
-#define GetPortStatus		(0xa300 | USB_REQ_GET_STATUS)
-#define SetHubFeature		(0x2000 | USB_REQ_SET_FEATURE)
-#define SetPortFeature		(0x2300 | USB_REQ_SET_FEATURE)
-
-
-/*-------------------------------------------------------------------------*/
-
-/* class requests from USB 3.0 hub spec, table 10-5 */
-#define SetHubDepth		(0x3000 | HUB_SET_DEPTH)
-#define GetPortErrorCount	(0x8000 | HUB_GET_PORT_ERR_COUNT)
-
-/*
- * Generic bandwidth allocation constants/support
- */
-#define FRAME_TIME_USECS	1000L
-#define BitTime(bytecount) (7 * 8 * bytecount / 6) /* with integer truncation */
-		/* Trying not to use worst-case bit-stuffing
-		 * of (7/6 * 8 * bytecount) = 9.33 * bytecount */
-		/* bytecount = data payload byte count */
-
-#define NS_TO_US(ns)	((ns + 500L) / 1000L)
-			/* convert & round nanoseconds to microseconds */
-
-
-/*
- * Full/low speed bandwidth allocation constants/support.
- */
-#define BW_HOST_DELAY	1000L		/* nanoseconds */
-#define BW_HUB_LS_SETUP	333L		/* nanoseconds */
-			/* 4 full-speed bit times (est.) */
-
-#define FRAME_TIME_BITS			12000L	/* frame = 1 millisecond */
-#define FRAME_TIME_MAX_BITS_ALLOC	(90L * FRAME_TIME_BITS / 100L)
-#define FRAME_TIME_MAX_USECS_ALLOC	(90L * FRAME_TIME_USECS / 100L)
-
-/*
- * Ceiling [nano/micro]seconds (typical) for that many bytes at high speed
- * ISO is a bit less, no ACK ... from USB 2.0 spec, 5.11.3 (and needed
- * to preallocate bandwidth)
- */
-#define USB2_HOST_DELAY	5	/* nsec, guess */
-#define HS_NSECS(bytes) (((55 * 8 * 2083) \
-	+ (2083UL * (3 + BitTime(bytes))))/1000 \
-	+ USB2_HOST_DELAY)
-#define HS_NSECS_ISO(bytes) (((38 * 8 * 2083) \
-	+ (2083UL * (3 + BitTime(bytes))))/1000 \
-	+ USB2_HOST_DELAY)
-#define HS_USECS(bytes)		NS_TO_US(HS_NSECS(bytes))
-#define HS_USECS_ISO(bytes)	NS_TO_US(HS_NSECS_ISO(bytes))
-
-extern long usb_calc_bus_time(int speed, int is_input,
-			int isoc, int bytecount);
-
-/*-------------------------------------------------------------------------*/
-
-extern void usb_set_device_state(struct usb_device *udev,
-		enum usb_device_state new_state);
-
-/*-------------------------------------------------------------------------*/
-
-/* exported only within usbcore */
-
-extern struct list_head usb_bus_list;
-extern struct mutex usb_bus_list_lock;
-extern wait_queue_head_t usb_kill_urb_queue;
-
-extern int usb_find_interface_driver(struct usb_device *dev,
-	struct usb_interface *interface);
-
-#define usb_endpoint_out(ep_dir)	(!((ep_dir) & USB_DIR_IN))
-
-#ifdef CONFIG_PM
-extern void usb_root_hub_lost_power(struct usb_device *rhdev);
-extern int hcd_bus_suspend(struct usb_device *rhdev, pm_message_t msg);
-extern int hcd_bus_resume(struct usb_device *rhdev, pm_message_t msg);
-#endif /* CONFIG_PM */
-
-#ifdef CONFIG_USB_SUSPEND
-extern void usb_hcd_resume_root_hub(struct usb_hcd *hcd);
-#else
-static inline void usb_hcd_resume_root_hub(struct usb_hcd *hcd)
-{
-	return;
-}
-#endif /* CONFIG_USB_SUSPEND */
-
-
-/*
- * USB device fs stuff
- */
-
-#ifdef CONFIG_USB_DEVICEFS
-
-/*
- * these are expected to be called from the USB core/hub thread
- * with the kernel lock held
- */
-extern void usbfs_update_special(void);
-extern int usbfs_init(void);
-extern void usbfs_cleanup(void);
-
-#else /* CONFIG_USB_DEVICEFS */
-
-static inline void usbfs_update_special(void) {}
-static inline int usbfs_init(void) { return 0; }
-static inline void usbfs_cleanup(void) { }
-
-#endif /* CONFIG_USB_DEVICEFS */
-
-/*-------------------------------------------------------------------------*/
-
-#if defined(CONFIG_USB_MON) || defined(CONFIG_USB_MON_MODULE)
-
-struct usb_mon_operations {
-	void (*urb_submit)(struct usb_bus *bus, struct urb *urb);
-	void (*urb_submit_error)(struct usb_bus *bus, struct urb *urb, int err);
-	void (*urb_complete)(struct usb_bus *bus, struct urb *urb, int status);
-	/* void (*urb_unlink)(struct usb_bus *bus, struct urb *urb); */
-};
-
-extern struct usb_mon_operations *mon_ops;
-
-static inline void usbmon_urb_submit(struct usb_bus *bus, struct urb *urb)
-{
-	if (bus->monitored)
-		(*mon_ops->urb_submit)(bus, urb);
-}
-
-static inline void usbmon_urb_submit_error(struct usb_bus *bus, struct urb *urb,
-    int error)
-{
-	if (bus->monitored)
-		(*mon_ops->urb_submit_error)(bus, urb, error);
-}
-
-static inline void usbmon_urb_complete(struct usb_bus *bus, struct urb *urb,
-		int status)
-{
-	if (bus->monitored)
-		(*mon_ops->urb_complete)(bus, urb, status);
-}
-
-int usb_mon_register(struct usb_mon_operations *ops);
-void usb_mon_deregister(void);
-
-#else
-
-static inline void usbmon_urb_submit(struct usb_bus *bus, struct urb *urb) {}
-static inline void usbmon_urb_submit_error(struct usb_bus *bus, struct urb *urb,
-    int error) {}
-static inline void usbmon_urb_complete(struct usb_bus *bus, struct urb *urb,
-		int status) {}
-
-#endif /* CONFIG_USB_MON || CONFIG_USB_MON_MODULE */
-
-/*-------------------------------------------------------------------------*/
-
-/* random stuff */
-
-#define	RUN_CONTEXT (in_irq() ? "in_irq" \
-		: (in_interrupt() ? "in_interrupt" : "can sleep"))
-
-
-/* This rwsem is for use only by the hub driver and ehci-hcd.
- * Nobody else should touch it.
- */
-extern struct rw_semaphore ehci_cf_port_reset_rwsem;
-
-/* Keep track of which host controller drivers are loaded */
-#define USB_UHCI_LOADED		0
-#define USB_OHCI_LOADED		1
-#define USB_EHCI_LOADED		2
-extern unsigned long usb_hcds_loaded;
-
-#endif /* __KERNEL__ */
-
-#endif /* __USB_CORE_HCD_H */
diff --git a/ANDROID_3.4.5/include/linux/usb/input.h b/ANDROID_3.4.5/include/linux/usb/input.h
deleted file mode 100644
index 0e010b22..00000000
--- a/ANDROID_3.4.5/include/linux/usb/input.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * Copyright (C) 2005 Dmitry Torokhov
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-
-#ifndef __LINUX_USB_INPUT_H
-#define __LINUX_USB_INPUT_H
-
-#include <linux/usb.h>
-#include <linux/input.h>
-#include <asm/byteorder.h>
-
-static inline void
-usb_to_input_id(const struct usb_device *dev, struct input_id *id)
-{
-	id->bustype = BUS_USB;
-	id->vendor = le16_to_cpu(dev->descriptor.idVendor);
-	id->product = le16_to_cpu(dev->descriptor.idProduct);
-	id->version = le16_to_cpu(dev->descriptor.bcdDevice);
-}
-
-#endif /* __LINUX_USB_INPUT_H */
diff --git a/ANDROID_3.4.5/include/linux/usb/intel_mid_otg.h b/ANDROID_3.4.5/include/linux/usb/intel_mid_otg.h
deleted file mode 100644
index 756cf554..00000000
--- a/ANDROID_3.4.5/include/linux/usb/intel_mid_otg.h
+++ /dev/null
@@ -1,180 +0,0 @@
-/*
- * Intel MID (Langwell/Penwell) USB OTG Transceiver driver
- * Copyright (C) 2008 - 2010, Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- *
- */
-
-#ifndef __INTEL_MID_OTG_H
-#define __INTEL_MID_OTG_H
-
-#include <linux/pm.h>
-#include <linux/usb/otg.h>
-#include <linux/notifier.h>
-
-struct intel_mid_otg_xceiv;
-
-/* This is a common data structure for Intel MID platform to
- * save values of the OTG state machine */
-struct otg_hsm {
-	/* Input */
-	int a_bus_resume;
-	int a_bus_suspend;
-	int a_conn;
-	int a_sess_vld;
-	int a_srp_det;
-	int a_vbus_vld;
-	int b_bus_resume;
-	int b_bus_suspend;
-	int b_conn;
-	int b_se0_srp;
-	int b_ssend_srp;
-	int b_sess_end;
-	int b_sess_vld;
-	int id;
-/* id values */
-#define ID_B		0x05
-#define ID_A		0x04
-#define ID_ACA_C	0x03
-#define ID_ACA_B	0x02
-#define ID_ACA_A	0x01
-	int power_up;
-	int adp_change;
-	int test_device;
-
-	/* Internal variables */
-	int a_set_b_hnp_en;
-	int b_srp_done;
-	int b_hnp_enable;
-	int hnp_poll_enable;
-
-	/* Timeout indicator for timers */
-	int a_wait_vrise_tmout;
-	int a_wait_bcon_tmout;
-	int a_aidl_bdis_tmout;
-	int a_bidl_adis_tmout;
-	int a_bidl_adis_tmr;
-	int a_wait_vfall_tmout;
-	int b_ase0_brst_tmout;
-	int b_bus_suspend_tmout;
-	int b_srp_init_tmout;
-	int b_srp_fail_tmout;
-	int b_srp_fail_tmr;
-	int b_adp_sense_tmout;
-
-	/* Informative variables */
-	int a_bus_drop;
-	int a_bus_req;
-	int a_clr_err;
-	int b_bus_req;
-	int a_suspend_req;
-	int b_bus_suspend_vld;
-
-	/* Output */
-	int drv_vbus;
-	int loc_conn;
-	int loc_sof;
-
-	/* Others */
-	int vbus_srp_up;
-};
-
-/* must provide ULPI access function to read/write registers implemented in
- * ULPI address space */
-struct iotg_ulpi_access_ops {
-	int	(*read)(struct intel_mid_otg_xceiv *iotg, u8 reg, u8 *val);
-	int	(*write)(struct intel_mid_otg_xceiv *iotg, u8 reg, u8 val);
-};
-
-#define OTG_A_DEVICE	0x0
-#define OTG_B_DEVICE	0x1
-
-/*
- * the Intel MID (Langwell/Penwell) otg transceiver driver needs to interact
- * with device and host drivers to implement the USB OTG related feature. More
- * function members are added based on usb_phy data structure for this
- * purpose.
- */
-struct intel_mid_otg_xceiv {
-	struct usb_phy		otg;
-	struct otg_hsm		hsm;
-
-	/* base address */
-	void __iomem		*base;
-
-	/* ops to access ulpi */
-	struct iotg_ulpi_access_ops	ulpi_ops;
-
-	/* atomic notifier for interrupt context */
-	struct atomic_notifier_head	iotg_notifier;
-
-	/* start/stop USB Host function */
-	int	(*start_host)(struct intel_mid_otg_xceiv *iotg);
-	int	(*stop_host)(struct intel_mid_otg_xceiv *iotg);
-
-	/* start/stop USB Peripheral function */
-	int	(*start_peripheral)(struct intel_mid_otg_xceiv *iotg);
-	int	(*stop_peripheral)(struct intel_mid_otg_xceiv *iotg);
-
-	/* start/stop ADP sense/probe function */
-	int	(*set_adp_probe)(struct intel_mid_otg_xceiv *iotg,
-					bool enabled, int dev);
-	int	(*set_adp_sense)(struct intel_mid_otg_xceiv *iotg,
-					bool enabled);
-
-#ifdef CONFIG_PM
-	/* suspend/resume USB host function */
-	int	(*suspend_host)(struct intel_mid_otg_xceiv *iotg,
-					pm_message_t message);
-	int	(*resume_host)(struct intel_mid_otg_xceiv *iotg);
-
-	int	(*suspend_peripheral)(struct intel_mid_otg_xceiv *iotg,
-					pm_message_t message);
-	int	(*resume_peripheral)(struct intel_mid_otg_xceiv *iotg);
-#endif
-
-};
-static inline
-struct intel_mid_otg_xceiv *otg_to_mid_xceiv(struct usb_phy *otg)
-{
-	return container_of(otg, struct intel_mid_otg_xceiv, otg);
-}
-
-#define MID_OTG_NOTIFY_CONNECT		0x0001
-#define MID_OTG_NOTIFY_DISCONN		0x0002
-#define MID_OTG_NOTIFY_HSUSPEND		0x0003
-#define MID_OTG_NOTIFY_HRESUME		0x0004
-#define MID_OTG_NOTIFY_CSUSPEND		0x0005
-#define MID_OTG_NOTIFY_CRESUME		0x0006
-#define MID_OTG_NOTIFY_HOSTADD		0x0007
-#define MID_OTG_NOTIFY_HOSTREMOVE	0x0008
-#define MID_OTG_NOTIFY_CLIENTADD	0x0009
-#define MID_OTG_NOTIFY_CLIENTREMOVE	0x000a
-
-static inline int
-intel_mid_otg_register_notifier(struct intel_mid_otg_xceiv *iotg,
-				struct notifier_block *nb)
-{
-	return atomic_notifier_chain_register(&iotg->iotg_notifier, nb);
-}
-
-static inline void
-intel_mid_otg_unregister_notifier(struct intel_mid_otg_xceiv *iotg,
-				struct notifier_block *nb)
-{
-	atomic_notifier_chain_unregister(&iotg->iotg_notifier, nb);
-}
-
-#endif /* __INTEL_MID_OTG_H */
diff --git a/ANDROID_3.4.5/include/linux/usb/iowarrior.h b/ANDROID_3.4.5/include/linux/usb/iowarrior.h
deleted file mode 100644
index 4fd6513d..00000000
--- a/ANDROID_3.4.5/include/linux/usb/iowarrior.h
+++ /dev/null
@@ -1,42 +0,0 @@
-#ifndef __LINUX_USB_IOWARRIOR_H
-#define __LINUX_USB_IOWARRIOR_H
-
-#define CODEMERCS_MAGIC_NUMBER	0xC0	/* like COde Mercenaries */
-
-/* Define the ioctl commands for reading and writing data */
-#define IOW_WRITE	_IOW(CODEMERCS_MAGIC_NUMBER, 1, __u8 *)
-#define IOW_READ	_IOW(CODEMERCS_MAGIC_NUMBER, 2, __u8 *)
-
-/*
-   A struct for available device info which is read
-   with the ioctl IOW_GETINFO.
-   To be compatible with 2.4 userspace which didn't have an easy way to get
-   this information.
-*/
-struct iowarrior_info {
-	/* vendor id : supposed to be USB_VENDOR_ID_CODEMERCS in all cases */
-	__u32 vendor;
-	/* product id : depends on type of chip (USB_DEVICE_ID_CODEMERCS_X) */
-	__u32 product;
-	/* the serial number of our chip (if a serial-number is not available
-	 * this is empty string) */
-	__u8 serial[9];
-	/* revision number of the chip */
-	__u32 revision;
-	/* USB-speed of the device (0=UNKNOWN, 1=LOW, 2=FULL 3=HIGH) */
-	__u32 speed;
-	/* power consumption of the device in mA */
-	__u32 power;
-	/* the number of the endpoint */
-	__u32 if_num;
-	/* size of the data-packets on this interface */
-	__u32 report_size;
-};
-
-/*
-  Get some device-information (product-id , serial-number etc.)
-  in order to identify a chip.
-*/
-#define IOW_GETINFO _IOR(CODEMERCS_MAGIC_NUMBER, 3, struct iowarrior_info)
-
-#endif /* __LINUX_USB_IOWARRIOR_H */
diff --git a/ANDROID_3.4.5/include/linux/usb/irda.h b/ANDROID_3.4.5/include/linux/usb/irda.h
deleted file mode 100644
index e345ceaf..00000000
--- a/ANDROID_3.4.5/include/linux/usb/irda.h
+++ /dev/null
@@ -1,151 +0,0 @@
-/*
- * USB IrDA Bridge Device Definition
- */
-
-#ifndef __LINUX_USB_IRDA_H
-#define __LINUX_USB_IRDA_H
-
-/* This device should use Application-specific class */
-
-#define USB_SUBCLASS_IRDA			0x02
-
-/*-------------------------------------------------------------------------*/
-
-/* Class-Specific requests (bRequest field) */
-
-#define USB_REQ_CS_IRDA_RECEIVING		1
-#define USB_REQ_CS_IRDA_CHECK_MEDIA_BUSY	3
-#define USB_REQ_CS_IRDA_RATE_SNIFF		4
-#define USB_REQ_CS_IRDA_UNICAST_LIST		5
-#define USB_REQ_CS_IRDA_GET_CLASS_DESC		6
-
-/*-------------------------------------------------------------------------*/
-
-/* Class-Specific descriptor */
-
-#define USB_DT_CS_IRDA				0x21
-
-/*-------------------------------------------------------------------------*/
-
-/* Data sizes */
-
-#define USB_IRDA_DS_2048			(1 << 5)
-#define USB_IRDA_DS_1024			(1 << 4)
-#define USB_IRDA_DS_512				(1 << 3)
-#define USB_IRDA_DS_256				(1 << 2)
-#define USB_IRDA_DS_128				(1 << 1)
-#define USB_IRDA_DS_64				(1 << 0)
-
-/* Window sizes */
-
-#define USB_IRDA_WS_7				(1 << 6)
-#define USB_IRDA_WS_6				(1 << 5)
-#define USB_IRDA_WS_5				(1 << 4)
-#define USB_IRDA_WS_4				(1 << 3)
-#define USB_IRDA_WS_3				(1 << 2)
-#define USB_IRDA_WS_2				(1 << 1)
-#define USB_IRDA_WS_1				(1 << 0)
-
-/* Min turnaround times in usecs */
-
-#define USB_IRDA_MTT_0				(1 << 7)
-#define USB_IRDA_MTT_10				(1 << 6)
-#define USB_IRDA_MTT_50				(1 << 5)
-#define USB_IRDA_MTT_100			(1 << 4)
-#define USB_IRDA_MTT_500			(1 << 3)
-#define USB_IRDA_MTT_1000			(1 << 2)
-#define USB_IRDA_MTT_5000			(1 << 1)
-#define USB_IRDA_MTT_10000			(1 << 0)
-
-/* Baud rates */
-
-#define USB_IRDA_BR_4000000			(1 << 8)
-#define USB_IRDA_BR_1152000			(1 << 7)
-#define USB_IRDA_BR_576000			(1 << 6)
-#define USB_IRDA_BR_115200			(1 << 5)
-#define USB_IRDA_BR_57600			(1 << 4)
-#define USB_IRDA_BR_38400			(1 << 3)
-#define USB_IRDA_BR_19200			(1 << 2)
-#define USB_IRDA_BR_9600			(1 << 1)
-#define USB_IRDA_BR_2400			(1 << 0)
-
-/* Additional BOFs */
-
-#define USB_IRDA_AB_0				(1 << 7)
-#define USB_IRDA_AB_1				(1 << 6)
-#define USB_IRDA_AB_2				(1 << 5)
-#define USB_IRDA_AB_3				(1 << 4)
-#define USB_IRDA_AB_6				(1 << 3)
-#define USB_IRDA_AB_12				(1 << 2)
-#define USB_IRDA_AB_24				(1 << 1)
-#define USB_IRDA_AB_48				(1 << 0)
-
-/* IRDA Rate Sniff */
-
-#define USB_IRDA_RATE_SNIFF			1
-
-/*-------------------------------------------------------------------------*/
-
-struct usb_irda_cs_descriptor {
-	__u8	bLength;
-	__u8	bDescriptorType;
-
-	__le16	bcdSpecRevision;
-	__u8	bmDataSize;
-	__u8	bmWindowSize;
-	__u8	bmMinTurnaroundTime;
-	__le16	wBaudRate;
-	__u8	bmAdditionalBOFs;
-	__u8	bIrdaRateSniff;
-	__u8	bMaxUnicastList;
-} __attribute__ ((packed));
-
-/*-------------------------------------------------------------------------*/
-
-/* Data Format */
-
-#define USB_IRDA_STATUS_MEDIA_BUSY	(1 << 7)
-
-/* The following is a 4-bit value used for both
- * inbound and outbound headers:
- *
- * 0 - speed ignored
- * 1 - 2400 bps
- * 2 - 9600 bps
- * 3 - 19200 bps
- * 4 - 38400 bps
- * 5 - 57600 bps
- * 6 - 115200 bps
- * 7 - 576000 bps
- * 8 - 1.152 Mbps
- * 9 - 5 mbps
- * 10..15 - Reserved
- */
-#define USB_IRDA_STATUS_LINK_SPEED	0x0f
-
-/* The following is a 4-bit value used only for
- * outbound header:
- *
- * 0 - No change (BOF ignored)
- * 1 - 48 BOFs
- * 2 - 24 BOFs
- * 3 - 12 BOFs
- * 4 - 6 BOFs
- * 5 - 3 BOFs
- * 6 - 2 BOFs
- * 7 - 1 BOFs
- * 8 - 0 BOFs
- * 9..15 - Reserved
- */
-#define USB_IRDA_EXTRA_BOFS		0xf0
-
-struct usb_irda_inbound_header {
-	__u8		bmStatus;
-};
-
-struct usb_irda_outbound_header {
-	__u8		bmChange;
-};
-
-#endif /* __LINUX_USB_IRDA_H */
-
diff --git a/ANDROID_3.4.5/include/linux/usb/isp116x.h b/ANDROID_3.4.5/include/linux/usb/isp116x.h
deleted file mode 100644
index 96ca114e..00000000
--- a/ANDROID_3.4.5/include/linux/usb/isp116x.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * Board initialization code should put one of these into dev->platform_data
- * and place the isp116x onto platform_bus.
- */
-
-#ifndef __LINUX_USB_ISP116X_H
-#define __LINUX_USB_ISP116X_H
-
-struct isp116x_platform_data {
-	/* Enable internal resistors on downstream ports */
-	unsigned sel15Kres:1;
-	/* On-chip overcurrent detection */
-	unsigned oc_enable:1;
-	/* INT output polarity */
-	unsigned int_act_high:1;
-	/* INT edge or level triggered */
-	unsigned int_edge_triggered:1;
-	/* Enable wakeup by devices on usb bus (e.g. wakeup
-	   by attachment/detachment or by device activity
-	   such as moving a mouse). When chosen, this option
-	   prevents stopping internal clock, increasing
-	   thereby power consumption in suspended state. */
-	unsigned remote_wakeup_enable:1;
-	/* Inter-io delay (ns). The chip is picky about access timings; it
-	   expects at least:
-	   150ns delay between consecutive accesses to DATA_REG,
-	   300ns delay between access to ADDR_REG and DATA_REG
-	   OE, WE MUST NOT be changed during these intervals
-	 */
-	void (*delay) (struct device *dev, int delay);
-};
-
-#endif /* __LINUX_USB_ISP116X_H */
diff --git a/ANDROID_3.4.5/include/linux/usb/isp1362.h b/ANDROID_3.4.5/include/linux/usb/isp1362.h
deleted file mode 100644
index 642684bb..00000000
--- a/ANDROID_3.4.5/include/linux/usb/isp1362.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- * board initialization code should put one of these into dev->platform_data
- * and place the isp1362 onto platform_bus.
- */
-
-#ifndef __LINUX_USB_ISP1362_H__
-#define __LINUX_USB_ISP1362_H__
-
-struct isp1362_platform_data {
-	/* Enable internal pulldown resistors on downstream ports */
-	unsigned sel15Kres:1;
-	/* Clock cannot be stopped */
-	unsigned clknotstop:1;
-	/* On-chip overcurrent protection */
-	unsigned oc_enable:1;
-	/* INT output polarity */
-	unsigned int_act_high:1;
-	/* INT edge or level triggered */
-	unsigned int_edge_triggered:1;
-	/* DREQ output polarity */
-	unsigned dreq_act_high:1;
-	/* DACK input polarity */
-	unsigned dack_act_high:1;
-	/* chip can be resumed via H_WAKEUP pin */
-	unsigned remote_wakeup_connected:1;
-	/* Switch or not to switch (keep always powered) */
-	unsigned no_power_switching:1;
-	/* Ganged port power switching (0) or individual port power switching (1) */
-	unsigned power_switching_mode:1;
-	/* Given port_power, msec/2 after power on till power good */
-	u8 potpg;
-	/* Hardware reset set/clear */
-	void (*reset) (struct device *dev, int set);
-	/* Clock start/stop */
-	void (*clock) (struct device *dev, int start);
-	/* Inter-io delay (ns). The chip is picky about access timings; it
-	 * expects at least:
-	 * 110ns delay between consecutive accesses to DATA_REG,
-	 * 300ns delay between access to ADDR_REG and DATA_REG (registers)
-	 * 462ns delay between access to ADDR_REG and DATA_REG (buffer memory)
-	 * WE MUST NOT be activated during these intervals (even without CS!)
-	 */
-	void (*delay) (struct device *dev, unsigned int delay);
-};
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/usb/isp1760.h b/ANDROID_3.4.5/include/linux/usb/isp1760.h
deleted file mode 100644
index de7de53c..00000000
--- a/ANDROID_3.4.5/include/linux/usb/isp1760.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- * board initialization should put one of these into dev->platform_data
- * and place the isp1760 onto platform_bus named "isp1760-hcd".
- */
-
-#ifndef __LINUX_USB_ISP1760_H
-#define __LINUX_USB_ISP1760_H
-
-struct isp1760_platform_data {
-	unsigned is_isp1761:1;			/* Chip is ISP1761 */
-	unsigned bus_width_16:1;		/* 16/32-bit data bus width */
-	unsigned port1_otg:1;			/* Port 1 supports OTG */
-	unsigned analog_oc:1;			/* Analog overcurrent */
-	unsigned dack_polarity_high:1;		/* DACK active high */
-	unsigned dreq_polarity_high:1;		/* DREQ active high */
-};
-
-#endif /* __LINUX_USB_ISP1760_H */
diff --git a/ANDROID_3.4.5/include/linux/usb/langwell_udc.h b/ANDROID_3.4.5/include/linux/usb/langwell_udc.h
deleted file mode 100644
index 2d2d1bba..00000000
--- a/ANDROID_3.4.5/include/linux/usb/langwell_udc.h
+++ /dev/null
@@ -1,310 +0,0 @@
-/*
- * Intel Langwell USB Device Controller driver
- * Copyright (C) 2008-2009, Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- *
- */
-
-#ifndef __LANGWELL_UDC_H
-#define __LANGWELL_UDC_H
-
-
-/* MACRO defines */
-#define	CAP_REG_OFFSET		0x0
-#define	OP_REG_OFFSET		0x28
-
-#define	DMA_ADDR_INVALID	(~(dma_addr_t)0)
-
-#define	DQH_ALIGNMENT		2048
-#define	DTD_ALIGNMENT		64
-#define	DMA_BOUNDARY		4096
-
-#define	EP0_MAX_PKT_SIZE	64
-#define EP_DIR_IN		1
-#define EP_DIR_OUT		0
-
-#define FLUSH_TIMEOUT		1000
-#define RESET_TIMEOUT		1000
-#define SETUPSTAT_TIMEOUT	100
-#define PRIME_TIMEOUT		100
-
-
-/* device memory space registers */
-
-/* Capability Registers, BAR0 + CAP_REG_OFFSET */
-struct langwell_cap_regs {
-	/* offset: 0x0 */
-	u8	caplength;	/* offset of Operational Register */
-	u8	_reserved3;
-	u16	hciversion;	/* H: BCD encoding of host version */
-	u32	hcsparams;	/* H: host port steering logic capability */
-	u32	hccparams;	/* H: host multiple mode control capability */
-#define	HCC_LEN	BIT(17)		/* Link power management (LPM) capability */
-	u8	_reserved4[0x20-0xc];
-	/* offset: 0x20 */
-	u16	dciversion;	/* BCD encoding of device version */
-	u8	_reserved5[0x24-0x22];
-	u32	dccparams;	/* overall device controller capability */
-#define	HOSTCAP	BIT(8)		/* host capable */
-#define	DEVCAP	BIT(7)		/* device capable */
-#define DEN(d)	\
-	(((d)>>0)&0x1f)		/* bits 4:0, device endpoint number */
-} __attribute__ ((packed));
-
-
-/* Operational Registers, BAR0 + OP_REG_OFFSET */
-struct langwell_op_regs {
-	/* offset: 0x28 */
-	u32	extsts;
-#define	EXTS_TI1	BIT(4)	/* general purpose timer interrupt 1 */
-#define	EXTS_TI1TI0	BIT(3)	/* general purpose timer interrupt 0 */
-#define	EXTS_TI1UPI	BIT(2)	/* USB host periodic interrupt */
-#define	EXTS_TI1UAI	BIT(1)	/* USB host asynchronous interrupt */
-#define	EXTS_TI1NAKI	BIT(0)	/* NAK interrupt */
-	u32	extintr;
-#define	EXTI_TIE1	BIT(4)	/* general purpose timer interrupt enable 1 */
-#define	EXTI_TIE0	BIT(3)	/* general purpose timer interrupt enable 0 */
-#define	EXTI_UPIE	BIT(2)	/* USB host periodic interrupt enable */
-#define	EXTI_UAIE	BIT(1)	/* USB host asynchronous interrupt enable */
-#define	EXTI_NAKE	BIT(0)	/* NAK interrupt enable */
-	/* offset: 0x30 */
-	u32	usbcmd;
-#define	CMD_HIRD(u)	\
-	(((u)>>24)&0xf)		/* bits 27:24, host init resume duration */
-#define	CMD_ITC(u)	\
-	(((u)>>16)&0xff)	/* bits 23:16, interrupt threshold control */
-#define	CMD_PPE		BIT(15)	/* per-port change events enable */
-#define	CMD_ATDTW	BIT(14)	/* add dTD tripwire */
-#define	CMD_SUTW	BIT(13)	/* setup tripwire */
-#define	CMD_ASPE	BIT(11) /* asynchronous schedule park mode enable */
-#define	CMD_FS2		BIT(10)	/* frame list size */
-#define	CMD_ASP1	BIT(9)	/* asynchronous schedule park mode count */
-#define	CMD_ASP0	BIT(8)
-#define	CMD_LR		BIT(7)	/* light host/device controller reset */
-#define	CMD_IAA		BIT(6)	/* interrupt on async advance doorbell */
-#define	CMD_ASE		BIT(5)	/* asynchronous schedule enable */
-#define	CMD_PSE		BIT(4)	/* periodic schedule enable */
-#define	CMD_FS1		BIT(3)
-#define	CMD_FS0		BIT(2)
-#define	CMD_RST		BIT(1)	/* controller reset */
-#define	CMD_RUNSTOP	BIT(0)	/* run/stop */
-	u32	usbsts;
-#define	STS_PPCI(u)	\
-	(((u)>>16)&0xffff)	/* bits 31:16, port-n change detect */
-#define	STS_AS		BIT(15)	/* asynchronous schedule status */
-#define	STS_PS		BIT(14)	/* periodic schedule status */
-#define	STS_RCL		BIT(13)	/* reclamation */
-#define	STS_HCH		BIT(12)	/* HC halted */
-#define	STS_ULPII	BIT(10)	/* ULPI interrupt */
-#define	STS_SLI		BIT(8)	/* DC suspend */
-#define	STS_SRI		BIT(7)	/* SOF received */
-#define	STS_URI		BIT(6)	/* USB reset received */
-#define	STS_AAI		BIT(5)	/* interrupt on async advance */
-#define	STS_SEI		BIT(4)	/* system error */
-#define	STS_FRI		BIT(3)	/* frame list rollover */
-#define	STS_PCI		BIT(2)	/* port change detect */
-#define	STS_UEI		BIT(1)	/* USB error interrupt */
-#define	STS_UI		BIT(0)	/* USB interrupt */
-	u32	usbintr;
-/* bits 31:16, per-port interrupt enable */
-#define	INTR_PPCE(u)	(((u)>>16)&0xffff)
-#define	INTR_ULPIE	BIT(10)	/* ULPI enable */
-#define	INTR_SLE	BIT(8)	/* DC sleep/suspend enable */
-#define	INTR_SRE	BIT(7)	/* SOF received enable */
-#define	INTR_URE	BIT(6)	/* USB reset enable */
-#define	INTR_AAE	BIT(5)	/* interrupt on async advance enable */
-#define	INTR_SEE	BIT(4)	/* system error enable */
-#define	INTR_FRE	BIT(3)	/* frame list rollover enable */
-#define	INTR_PCE	BIT(2)	/* port change detect enable */
-#define	INTR_UEE	BIT(1)	/* USB error interrupt enable */
-#define	INTR_UE		BIT(0)	/* USB interrupt enable */
-	u32	frindex;	/* frame index */
-#define	FRINDEX_MASK	(0x3fff << 0)
-	u32	ctrldssegment;	/* not used */
-	u32	deviceaddr;
-#define USBADR_SHIFT	25
-#define	USBADR(d)	\
-	(((d)>>25)&0x7f)	/* bits 31:25, device address */
-#define USBADR_MASK	(0x7f << 25)
-#define	USBADRA		BIT(24)	/* device address advance */
-	u32	endpointlistaddr;/* endpoint list top memory address */
-/* bits 31:11, endpoint list pointer */
-#define	EPBASE(d)	(((d)>>11)&0x1fffff)
-#define	ENDPOINTLISTADDR_MASK	(0x1fffff << 11)
-	u32	ttctrl;		/* H: TT operatin, not used */
-	/* offset: 0x50 */
-	u32	burstsize;	/* burst size of data movement */
-#define	TXPBURST(b)	\
-	(((b)>>8)&0xff)		/* bits 15:8, TX burst length */
-#define	RXPBURST(b)	\
-	(((b)>>0)&0xff)		/* bits 7:0, RX burst length */
-	u32	txfilltuning;	/* TX tuning */
-	u32	txttfilltuning;	/* H: TX TT tuning */
-	u32	ic_usb;		/* control the IC_USB FS/LS transceiver */
-	/* offset: 0x60 */
-	u32	ulpi_viewport;	/* indirect access to ULPI PHY */
-#define	ULPIWU		BIT(31)	/* ULPI wakeup */
-#define	ULPIRUN		BIT(30)	/* ULPI read/write run */
-#define	ULPIRW		BIT(29)	/* ULPI read/write control */
-#define	ULPISS		BIT(27)	/* ULPI sync state */
-#define	ULPIPORT(u)	\
-	(((u)>>24)&7)		/* bits 26:24, ULPI port number */
-#define	ULPIADDR(u)	\
-	(((u)>>16)&0xff)	/* bits 23:16, ULPI data address */
-#define	ULPIDATRD(u)	\
-	(((u)>>8)&0xff)		/* bits 15:8, ULPI data read */
-#define	ULPIDATWR(u)	\
-	(((u)>>0)&0xff)		/* bits 7:0, ULPI date write */
-	u8	_reserved6[0x70-0x64];
-	/* offset: 0x70 */
-	u32	configflag;	/* H: not used */
-	u32	portsc1;	/* port status */
-#define	DA(p)	\
-	(((p)>>25)&0x7f)	/* bits 31:25, device address */
-#define	PORTS_SSTS	(BIT(24) | BIT(23))	/* suspend status */
-#define	PORTS_WKOC	BIT(22)	/* wake on over-current enable */
-#define	PORTS_WKDS	BIT(21)	/* wake on disconnect enable */
-#define	PORTS_WKCN	BIT(20)	/* wake on connect enable */
-#define	PORTS_PTC(p)	(((p)>>16)&0xf)	/* bits 19:16, port test control */
-#define	PORTS_PIC	(BIT(15) | BIT(14))	/* port indicator control */
-#define	PORTS_PO	BIT(13)	/* port owner */
-#define	PORTS_PP	BIT(12)	/* port power */
-#define	PORTS_LS	(BIT(11) | BIT(10))	/* line status */
-#define	PORTS_SLP	BIT(9)	/* suspend using L1 */
-#define	PORTS_PR	BIT(8)	/* port reset */
-#define	PORTS_SUSP	BIT(7)	/* suspend */
-#define	PORTS_FPR	BIT(6)	/* force port resume */
-#define	PORTS_OCC	BIT(5)	/* over-current change */
-#define	PORTS_OCA	BIT(4)	/* over-current active */
-#define	PORTS_PEC	BIT(3)	/* port enable/disable change */
-#define	PORTS_PE	BIT(2)	/* port enable/disable */
-#define	PORTS_CSC	BIT(1)	/* connect status change */
-#define	PORTS_CCS	BIT(0)	/* current connect status */
-	u8	_reserved7[0xb4-0x78];
-	/* offset: 0xb4 */
-	u32	devlc;		/* control LPM and each USB port behavior */
-/* bits 31:29, parallel transceiver select */
-#define	LPM_PTS(d)	(((d)>>29)&7)
-#define	LPM_STS		BIT(28)	/* serial transceiver select */
-#define	LPM_PTW		BIT(27)	/* parallel transceiver width */
-#define	LPM_PSPD(d)	(((d)>>25)&3)	/* bits 26:25, port speed */
-#define LPM_PSPD_MASK	(BIT(26) | BIT(25))
-#define LPM_SPEED_FULL	0
-#define LPM_SPEED_LOW	1
-#define LPM_SPEED_HIGH	2
-#define	LPM_SRT		BIT(24)	/* shorten reset time */
-#define	LPM_PFSC	BIT(23)	/* port force full speed connect */
-#define	LPM_PHCD	BIT(22) /* PHY low power suspend clock disable */
-#define	LPM_STL		BIT(16)	/* STALL reply to LPM token */
-#define	LPM_BA(d)	\
-	(((d)>>1)&0x7ff)	/* bits 11:1, BmAttributes */
-#define	LPM_NYT_ACK	BIT(0)	/* NYET/ACK reply to LPM token */
-	u8	_reserved8[0xf4-0xb8];
-	/* offset: 0xf4 */
-	u32	otgsc;		/* On-The-Go status and control */
-#define	OTGSC_DPIE	BIT(30)	/* data pulse interrupt enable */
-#define	OTGSC_MSE	BIT(29)	/* 1 ms timer interrupt enable */
-#define	OTGSC_BSEIE	BIT(28)	/* B session end interrupt enable */
-#define	OTGSC_BSVIE	BIT(27)	/* B session valid interrupt enable */
-#define	OTGSC_ASVIE	BIT(26)	/* A session valid interrupt enable */
-#define	OTGSC_AVVIE	BIT(25)	/* A VBUS valid interrupt enable */
-#define	OTGSC_IDIE	BIT(24)	/* USB ID interrupt enable */
-#define	OTGSC_DPIS	BIT(22)	/* data pulse interrupt status */
-#define	OTGSC_MSS	BIT(21)	/* 1 ms timer interrupt status */
-#define	OTGSC_BSEIS	BIT(20)	/* B session end interrupt status */
-#define	OTGSC_BSVIS	BIT(19)	/* B session valid interrupt status */
-#define	OTGSC_ASVIS	BIT(18)	/* A session valid interrupt status */
-#define	OTGSC_AVVIS	BIT(17)	/* A VBUS valid interrupt status */
-#define	OTGSC_IDIS	BIT(16)	/* USB ID interrupt status */
-#define	OTGSC_DPS	BIT(14)	/* data bus pulsing status */
-#define	OTGSC_MST	BIT(13)	/* 1 ms timer toggle */
-#define	OTGSC_BSE	BIT(12)	/* B session end */
-#define	OTGSC_BSV	BIT(11)	/* B session valid */
-#define	OTGSC_ASV	BIT(10)	/* A session valid */
-#define	OTGSC_AVV	BIT(9)	/* A VBUS valid */
-#define	OTGSC_USBID	BIT(8)	/* USB ID */
-#define	OTGSC_HABA	BIT(7)	/* hw assist B-disconnect to A-connect */
-#define	OTGSC_HADP	BIT(6)	/* hw assist data pulse */
-#define	OTGSC_IDPU	BIT(5)	/* ID pullup */
-#define	OTGSC_DP	BIT(4)	/* data pulsing */
-#define	OTGSC_OT	BIT(3)	/* OTG termination */
-#define	OTGSC_HAAR	BIT(2)	/* hw assist auto reset */
-#define	OTGSC_VC	BIT(1)	/* VBUS charge */
-#define	OTGSC_VD	BIT(0)	/* VBUS discharge */
-	u32	usbmode;
-#define	MODE_VBPS	BIT(5)	/* R/W VBUS power select */
-#define	MODE_SDIS	BIT(4)	/* R/W stream disable mode */
-#define	MODE_SLOM	BIT(3)	/* R/W setup lockout mode */
-#define	MODE_ENSE	BIT(2)	/* endian select */
-#define	MODE_CM(u)	(((u)>>0)&3)	/* bits 1:0, controller mode */
-#define	MODE_IDLE	0
-#define	MODE_DEVICE	2
-#define	MODE_HOST	3
-	u8	_reserved9[0x100-0xfc];
-	/* offset: 0x100 */
-	u32	endptnak;
-#define	EPTN(e)		\
-	(((e)>>16)&0xffff)	/* bits 31:16, TX endpoint NAK */
-#define	EPRN(e)		\
-	(((e)>>0)&0xffff)	/* bits 15:0, RX endpoint NAK */
-	u32	endptnaken;
-#define	EPTNE(e)	\
-	(((e)>>16)&0xffff)	/* bits 31:16, TX endpoint NAK enable */
-#define	EPRNE(e)	\
-	(((e)>>0)&0xffff)	/* bits 15:0, RX endpoint NAK enable */
-	u32	endptsetupstat;
-#define	SETUPSTAT_MASK		(0xffff << 0)	/* bits 15:0 */
-#define EP0SETUPSTAT_MASK	1
-	u32	endptprime;
-/* bits 31:16, prime endpoint transmit buffer */
-#define	PETB(e)		(((e)>>16)&0xffff)
-/* bits 15:0, prime endpoint receive buffer */
-#define	PERB(e)		(((e)>>0)&0xffff)
-	/* offset: 0x110 */
-	u32	endptflush;
-/* bits 31:16, flush endpoint transmit buffer */
-#define	FETB(e)		(((e)>>16)&0xffff)
-/* bits 15:0, flush endpoint receive buffer */
-#define	FERB(e)		(((e)>>0)&0xffff)
-	u32	endptstat;
-/* bits 31:16, endpoint transmit buffer ready */
-#define	ETBR(e)		(((e)>>16)&0xffff)
-/* bits 15:0, endpoint receive buffer ready */
-#define	ERBR(e)		(((e)>>0)&0xffff)
-	u32	endptcomplete;
-/* bits 31:16, endpoint transmit complete event */
-#define	ETCE(e)		(((e)>>16)&0xffff)
-/* bits 15:0, endpoint receive complete event */
-#define	ERCE(e)		(((e)>>0)&0xffff)
-	/* offset: 0x11c */
-	u32	endptctrl[16];
-#define	EPCTRL_TXE	BIT(23)	/* TX endpoint enable */
-#define	EPCTRL_TXR	BIT(22)	/* TX data toggle reset */
-#define	EPCTRL_TXI	BIT(21)	/* TX data toggle inhibit */
-#define	EPCTRL_TXT(e)	(((e)>>18)&3)	/* bits 19:18, TX endpoint type */
-#define	EPCTRL_TXT_SHIFT	18
-#define	EPCTRL_TXD	BIT(17)	/* TX endpoint data source */
-#define	EPCTRL_TXS	BIT(16)	/* TX endpoint STALL */
-#define	EPCTRL_RXE	BIT(7)	/* RX endpoint enable */
-#define	EPCTRL_RXR	BIT(6)	/* RX data toggle reset */
-#define	EPCTRL_RXI	BIT(5)	/* RX data toggle inhibit */
-#define	EPCTRL_RXT(e)	(((e)>>2)&3)	/* bits 3:2, RX endpoint type */
-#define	EPCTRL_RXT_SHIFT	2	/* bits 19:18, TX endpoint type */
-#define	EPCTRL_RXD	BIT(1)	/* RX endpoint data sink */
-#define	EPCTRL_RXS	BIT(0)	/* RX endpoint STALL */
-} __attribute__ ((packed));
-
-#endif /* __LANGWELL_UDC_H */
-
diff --git a/ANDROID_3.4.5/include/linux/usb/m66592.h b/ANDROID_3.4.5/include/linux/usb/m66592.h
deleted file mode 100644
index a4ba31ab..00000000
--- a/ANDROID_3.4.5/include/linux/usb/m66592.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- * M66592 driver platform data
- *
- * Copyright (C) 2009  Renesas Solutions Corp.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- *
- */
-
-#ifndef __LINUX_USB_M66592_H
-#define __LINUX_USB_M66592_H
-
-#define M66592_PLATDATA_XTAL_12MHZ	0x01
-#define M66592_PLATDATA_XTAL_24MHZ	0x02
-#define M66592_PLATDATA_XTAL_48MHZ	0x03
-
-struct m66592_platdata {
-	/* one = on chip controller, zero = external controller */
-	unsigned	on_chip:1;
-
-	/* one = big endian, zero = little endian */
-	unsigned	endian:1;
-
-	/* (external controller only) M66592_PLATDATA_XTAL_nnMHZ */
-	unsigned	xtal:2;
-
-	/* (external controller only) one = 3.3V, zero = 1.5V */
-	unsigned	vif:1;
-
-	/* (external controller only) set one = WR0_N shorted to WR1_N */
-	unsigned	wr0_shorted_to_wr1:1;
-};
-
-#endif /* __LINUX_USB_M66592_H */
-
diff --git a/ANDROID_3.4.5/include/linux/usb/midi.h b/ANDROID_3.4.5/include/linux/usb/midi.h
deleted file mode 100644
index c8c52e3c..00000000
--- a/ANDROID_3.4.5/include/linux/usb/midi.h
+++ /dev/null
@@ -1,112 +0,0 @@
-/*
- * <linux/usb/midi.h> -- USB MIDI definitions.
- *
- * Copyright (C) 2006 Thumtronics Pty Ltd.
- * Developed for Thumtronics by Grey Innovation
- * Ben Williamson <ben.williamson@greyinnovation.com>
- *
- * This software is distributed under the terms of the GNU General Public
- * License ("GPL") version 2, as published by the Free Software Foundation.
- *
- * This file holds USB constants and structures defined
- * by the USB Device Class Definition for MIDI Devices.
- * Comments below reference relevant sections of that document:
- *
- * http://www.usb.org/developers/devclass_docs/midi10.pdf
- */
-
-#ifndef __LINUX_USB_MIDI_H
-#define __LINUX_USB_MIDI_H
-
-#include <linux/types.h>
-
-/* A.1  MS Class-Specific Interface Descriptor Subtypes */
-#define USB_MS_HEADER		0x01
-#define USB_MS_MIDI_IN_JACK	0x02
-#define USB_MS_MIDI_OUT_JACK	0x03
-#define USB_MS_ELEMENT		0x04
-
-/* A.2  MS Class-Specific Endpoint Descriptor Subtypes */
-#define USB_MS_GENERAL		0x01
-
-/* A.3  MS MIDI IN and OUT Jack Types */
-#define USB_MS_EMBEDDED		0x01
-#define USB_MS_EXTERNAL		0x02
-
-/* 6.1.2.1  Class-Specific MS Interface Header Descriptor */
-struct usb_ms_header_descriptor {
-	__u8  bLength;
-	__u8  bDescriptorType;
-	__u8  bDescriptorSubtype;
-	__le16 bcdMSC;
-	__le16 wTotalLength;
-} __attribute__ ((packed));
-
-#define USB_DT_MS_HEADER_SIZE	7
-
-/* 6.1.2.2  MIDI IN Jack Descriptor */
-struct usb_midi_in_jack_descriptor {
-	__u8  bLength;
-	__u8  bDescriptorType;		/* USB_DT_CS_INTERFACE */
-	__u8  bDescriptorSubtype;	/* USB_MS_MIDI_IN_JACK */
-	__u8  bJackType;		/* USB_MS_EMBEDDED/EXTERNAL */
-	__u8  bJackID;
-	__u8  iJack;
-} __attribute__ ((packed));
-
-#define USB_DT_MIDI_IN_SIZE	6
-
-struct usb_midi_source_pin {
-	__u8  baSourceID;
-	__u8  baSourcePin;
-} __attribute__ ((packed));
-
-/* 6.1.2.3  MIDI OUT Jack Descriptor */
-struct usb_midi_out_jack_descriptor {
-	__u8  bLength;
-	__u8  bDescriptorType;		/* USB_DT_CS_INTERFACE */
-	__u8  bDescriptorSubtype;	/* USB_MS_MIDI_OUT_JACK */
-	__u8  bJackType;		/* USB_MS_EMBEDDED/EXTERNAL */
-	__u8  bJackID;
-	__u8  bNrInputPins;		/* p */
-	struct usb_midi_source_pin pins[]; /* [p] */
-	/*__u8  iJack;  -- omitted due to variable-sized pins[] */
-} __attribute__ ((packed));
-
-#define USB_DT_MIDI_OUT_SIZE(p)	(7 + 2 * (p))
-
-/* As above, but more useful for defining your own descriptors: */
-#define DECLARE_USB_MIDI_OUT_JACK_DESCRIPTOR(p)			\
-struct usb_midi_out_jack_descriptor_##p {			\
-	__u8  bLength;						\
-	__u8  bDescriptorType;					\
-	__u8  bDescriptorSubtype;				\
-	__u8  bJackType;					\
-	__u8  bJackID;						\
-	__u8  bNrInputPins;					\
-	struct usb_midi_source_pin pins[p];			\
-	__u8  iJack;						\
-} __attribute__ ((packed))
-
-/* 6.2.2  Class-Specific MS Bulk Data Endpoint Descriptor */
-struct usb_ms_endpoint_descriptor {
-	__u8  bLength;			/* 4+n */
-	__u8  bDescriptorType;		/* USB_DT_CS_ENDPOINT */
-	__u8  bDescriptorSubtype;	/* USB_MS_GENERAL */
-	__u8  bNumEmbMIDIJack;		/* n */
-	__u8  baAssocJackID[];		/* [n] */
-} __attribute__ ((packed));
-
-#define USB_DT_MS_ENDPOINT_SIZE(n)	(4 + (n))
-
-/* As above, but more useful for defining your own descriptors: */
-#define DECLARE_USB_MS_ENDPOINT_DESCRIPTOR(n)			\
-struct usb_ms_endpoint_descriptor_##n {				\
-	__u8  bLength;						\
-	__u8  bDescriptorType;					\
-	__u8  bDescriptorSubtype;				\
-	__u8  bNumEmbMIDIJack;					\
-	__u8  baAssocJackID[n];					\
-} __attribute__ ((packed))
-
-#endif /* __LINUX_USB_MIDI_H */
diff --git a/ANDROID_3.4.5/include/linux/usb/msm_hsusb.h b/ANDROID_3.4.5/include/linux/usb/msm_hsusb.h
deleted file mode 100644
index 22a396c1..00000000
--- a/ANDROID_3.4.5/include/linux/usb/msm_hsusb.h
+++ /dev/null
@@ -1,185 +0,0 @@
-/* linux/include/asm-arm/arch-msm/hsusb.h
- *
- * Copyright (C) 2008 Google, Inc.
- * Author: Brian Swetland <swetland@google.com>
- * Copyright (c) 2009-2011, Code Aurora Forum. All rights reserved.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __ASM_ARCH_MSM_HSUSB_H
-#define __ASM_ARCH_MSM_HSUSB_H
-
-#include <linux/types.h>
-#include <linux/usb/otg.h>
-
-/**
- * Supported USB modes
- *
- * USB_PERIPHERAL       Only peripheral mode is supported.
- * USB_HOST             Only host mode is supported.
- * USB_OTG              OTG mode is supported.
- *
- */
-enum usb_mode_type {
-	USB_NONE = 0,
-	USB_PERIPHERAL,
-	USB_HOST,
-	USB_OTG,
-};
-
-/**
- * OTG control
- *
- * OTG_NO_CONTROL	Id/VBUS notifications not required. Useful in host
- *                      only configuration.
- * OTG_PHY_CONTROL	Id/VBUS notifications comes form USB PHY.
- * OTG_PMIC_CONTROL	Id/VBUS notifications comes from PMIC hardware.
- * OTG_USER_CONTROL	Id/VBUS notifcations comes from User via sysfs.
- *
- */
-enum otg_control_type {
-	OTG_NO_CONTROL = 0,
-	OTG_PHY_CONTROL,
-	OTG_PMIC_CONTROL,
-	OTG_USER_CONTROL,
-};
-
-/**
- * PHY used in
- *
- * INVALID_PHY			Unsupported PHY
- * CI_45NM_INTEGRATED_PHY	Chipidea 45nm integrated PHY
- * SNPS_28NM_INTEGRATED_PHY	Synopsis 28nm integrated PHY
- *
- */
-enum msm_usb_phy_type {
-	INVALID_PHY = 0,
-	CI_45NM_INTEGRATED_PHY,
-	SNPS_28NM_INTEGRATED_PHY,
-};
-
-#define IDEV_CHG_MAX	1500
-#define IUNIT		100
-
-/**
- * Different states involved in USB charger detection.
- *
- * USB_CHG_STATE_UNDEFINED	USB charger is not connected or detection
- *                              process is not yet started.
- * USB_CHG_STATE_WAIT_FOR_DCD	Waiting for Data pins contact.
- * USB_CHG_STATE_DCD_DONE	Data pin contact is detected.
- * USB_CHG_STATE_PRIMARY_DONE	Primary detection is completed (Detects
- *                              between SDP and DCP/CDP).
- * USB_CHG_STATE_SECONDARY_DONE	Secondary detection is completed (Detects
- *                              between DCP and CDP).
- * USB_CHG_STATE_DETECTED	USB charger type is determined.
- *
- */
-enum usb_chg_state {
-	USB_CHG_STATE_UNDEFINED = 0,
-	USB_CHG_STATE_WAIT_FOR_DCD,
-	USB_CHG_STATE_DCD_DONE,
-	USB_CHG_STATE_PRIMARY_DONE,
-	USB_CHG_STATE_SECONDARY_DONE,
-	USB_CHG_STATE_DETECTED,
-};
-
-/**
- * USB charger types
- *
- * USB_INVALID_CHARGER	Invalid USB charger.
- * USB_SDP_CHARGER	Standard downstream port. Refers to a downstream port
- *                      on USB2.0 compliant host/hub.
- * USB_DCP_CHARGER	Dedicated charger port (AC charger/ Wall charger).
- * USB_CDP_CHARGER	Charging downstream port. Enumeration can happen and
- *                      IDEV_CHG_MAX can be drawn irrespective of USB state.
- *
- */
-enum usb_chg_type {
-	USB_INVALID_CHARGER = 0,
-	USB_SDP_CHARGER,
-	USB_DCP_CHARGER,
-	USB_CDP_CHARGER,
-};
-
-/**
- * struct msm_otg_platform_data - platform device data
- *              for msm_otg driver.
- * @phy_init_seq: PHY configuration sequence. val, reg pairs
- *              terminated by -1.
- * @vbus_power: VBUS power on/off routine.
- * @power_budget: VBUS power budget in mA (0 will be treated as 500mA).
- * @mode: Supported mode (OTG/peripheral/host).
- * @otg_control: OTG switch controlled by user/Id pin
- * @default_mode: Default operational mode. Applicable only if
- *              OTG switch is controller by user.
- * @pclk_src_name: pclk is derived from ebi1_usb_clk in case of 7x27 and 8k
- *              dfab_usb_hs_clk in case of 8660 and 8960.
- */
-struct msm_otg_platform_data {
-	int *phy_init_seq;
-	void (*vbus_power)(bool on);
-	unsigned power_budget;
-	enum usb_mode_type mode;
-	enum otg_control_type otg_control;
-	enum usb_mode_type default_mode;
-	enum msm_usb_phy_type phy_type;
-	void (*setup_gpio)(enum usb_otg_state state);
-	char *pclk_src_name;
-};
-
-/**
- * struct msm_otg: OTG driver data. Shared by HCD and DCD.
- * @otg: USB OTG Transceiver structure.
- * @pdata: otg device platform data.
- * @irq: IRQ number assigned for HSUSB controller.
- * @clk: clock struct of usb_hs_clk.
- * @pclk: clock struct of usb_hs_pclk.
- * @pclk_src: pclk source for voting.
- * @phy_reset_clk: clock struct of usb_phy_clk.
- * @core_clk: clock struct of usb_hs_core_clk.
- * @regs: ioremapped register base address.
- * @inputs: OTG state machine inputs(Id, SessValid etc).
- * @sm_work: OTG state machine work.
- * @in_lpm: indicates low power mode (LPM) state.
- * @async_int: Async interrupt arrived.
- * @cur_power: The amount of mA available from downstream port.
- * @chg_work: Charger detection work.
- * @chg_state: The state of charger detection process.
- * @chg_type: The type of charger attached.
- * @dcd_retires: The retry count used to track Data contact
- *               detection process.
- */
-struct msm_otg {
-	struct usb_phy phy;
-	struct msm_otg_platform_data *pdata;
-	int irq;
-	struct clk *clk;
-	struct clk *pclk;
-	struct clk *pclk_src;
-	struct clk *phy_reset_clk;
-	struct clk *core_clk;
-	void __iomem *regs;
-#define ID		0
-#define B_SESS_VLD	1
-	unsigned long inputs;
-	struct work_struct sm_work;
-	atomic_t in_lpm;
-	int async_int;
-	unsigned cur_power;
-	struct delayed_work chg_work;
-	enum usb_chg_state chg_state;
-	enum usb_chg_type chg_type;
-	u8 dcd_retries;
-};
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/usb/msm_hsusb_hw.h b/ANDROID_3.4.5/include/linux/usb/msm_hsusb_hw.h
deleted file mode 100644
index 6e97a2d3..00000000
--- a/ANDROID_3.4.5/include/linux/usb/msm_hsusb_hw.h
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- * Copyright (C) 2007 Google, Inc.
- * Author: Brian Swetland <swetland@google.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __LINUX_USB_GADGET_MSM72K_UDC_H__
-#define __LINUX_USB_GADGET_MSM72K_UDC_H__
-
-#define USB_AHBBURST         (MSM_USB_BASE + 0x0090)
-#define USB_AHBMODE          (MSM_USB_BASE + 0x0098)
-#define USB_CAPLENGTH        (MSM_USB_BASE + 0x0100) /* 8 bit */
-
-#define USB_USBCMD           (MSM_USB_BASE + 0x0140)
-#define USB_PORTSC           (MSM_USB_BASE + 0x0184)
-#define USB_OTGSC            (MSM_USB_BASE + 0x01A4)
-#define USB_USBMODE          (MSM_USB_BASE + 0x01A8)
-#define USB_PHY_CTRL         (MSM_USB_BASE + 0x0240)
-
-#define USBCMD_RESET   2
-#define USB_USBINTR          (MSM_USB_BASE + 0x0148)
-
-#define PORTSC_PHCD            (1 << 23) /* phy suspend mode */
-#define PORTSC_PTS_MASK         (3 << 30)
-#define PORTSC_PTS_ULPI         (3 << 30)
-
-#define USB_ULPI_VIEWPORT    (MSM_USB_BASE + 0x0170)
-#define ULPI_RUN              (1 << 30)
-#define ULPI_WRITE            (1 << 29)
-#define ULPI_READ             (0 << 29)
-#define ULPI_ADDR(n)          (((n) & 255) << 16)
-#define ULPI_DATA(n)          ((n) & 255)
-#define ULPI_DATA_READ(n)     (((n) >> 8) & 255)
-
-#define ASYNC_INTR_CTRL         (1 << 29) /* Enable async interrupt */
-#define ULPI_STP_CTRL           (1 << 30) /* Block communication with PHY */
-#define PHY_RETEN               (1 << 1) /* PHY retention enable/disable */
-
-/* OTG definitions */
-#define OTGSC_INTSTS_MASK	(0x7f << 16)
-#define OTGSC_ID		(1 << 8)
-#define OTGSC_BSV		(1 << 11)
-#define OTGSC_IDIS		(1 << 16)
-#define OTGSC_BSVIS		(1 << 19)
-#define OTGSC_IDIE		(1 << 24)
-#define OTGSC_BSVIE		(1 << 27)
-
-#endif /* __LINUX_USB_GADGET_MSM72K_UDC_H__ */
diff --git a/ANDROID_3.4.5/include/linux/usb/musb.h b/ANDROID_3.4.5/include/linux/usb/musb.h
deleted file mode 100644
index eb505250..00000000
--- a/ANDROID_3.4.5/include/linux/usb/musb.h
+++ /dev/null
@@ -1,152 +0,0 @@
-/*
- * This is used to for host and peripheral modes of the driver for
- * Inventra (Multidrop) Highspeed Dual-Role Controllers:  (M)HDRC.
- *
- * Board initialization should put one of these into dev->platform_data,
- * probably on some platform_device named "musb-hdrc".  It encapsulates
- * key configuration differences between boards.
- */
-
-#ifndef __LINUX_USB_MUSB_H
-#define __LINUX_USB_MUSB_H
-
-/* The USB role is defined by the connector used on the board, so long as
- * standards are being followed.  (Developer boards sometimes won't.)
- */
-enum musb_mode {
-	MUSB_UNDEFINED = 0,
-	MUSB_HOST,		/* A or Mini-A connector */
-	MUSB_PERIPHERAL,	/* B or Mini-B connector */
-	MUSB_OTG		/* Mini-AB connector */
-};
-
-struct clk;
-
-enum musb_fifo_style {
-	FIFO_RXTX,
-	FIFO_TX,
-	FIFO_RX
-} __attribute__ ((packed));
-
-enum musb_buf_mode {
-	BUF_SINGLE,
-	BUF_DOUBLE
-} __attribute__ ((packed));
-
-struct musb_fifo_cfg {
-	u8			hw_ep_num;
-	enum musb_fifo_style	style;
-	enum musb_buf_mode	mode;
-	u16			maxpacket;
-};
-
-#define MUSB_EP_FIFO(ep, st, m, pkt)		\
-{						\
-	.hw_ep_num	= ep,			\
-	.style		= st,			\
-	.mode		= m,			\
-	.maxpacket	= pkt,			\
-}
-
-#define MUSB_EP_FIFO_SINGLE(ep, st, pkt)	\
-	MUSB_EP_FIFO(ep, st, BUF_SINGLE, pkt)
-
-#define MUSB_EP_FIFO_DOUBLE(ep, st, pkt)	\
-	MUSB_EP_FIFO(ep, st, BUF_DOUBLE, pkt)
-
-struct musb_hdrc_eps_bits {
-	const char	name[16];
-	u8		bits;
-};
-
-struct musb_hdrc_config {
-	struct musb_fifo_cfg	*fifo_cfg;	/* board fifo configuration */
-	unsigned		fifo_cfg_size;	/* size of the fifo configuration */
-
-	/* MUSB configuration-specific details */
-	unsigned	multipoint:1;	/* multipoint device */
-	unsigned	dyn_fifo:1 __deprecated; /* supports dynamic fifo sizing */
-	unsigned	soft_con:1 __deprecated; /* soft connect required */
-	unsigned	utm_16:1 __deprecated; /* utm data witdh is 16 bits */
-	unsigned	big_endian:1;	/* true if CPU uses big-endian */
-	unsigned	mult_bulk_tx:1;	/* Tx ep required for multbulk pkts */
-	unsigned	mult_bulk_rx:1;	/* Rx ep required for multbulk pkts */
-	unsigned	high_iso_tx:1;	/* Tx ep required for HB iso */
-	unsigned	high_iso_rx:1;	/* Rx ep required for HD iso */
-	unsigned	dma:1 __deprecated; /* supports DMA */
-	unsigned	vendor_req:1 __deprecated; /* vendor registers required */
-
-	u8		num_eps;	/* number of endpoints _with_ ep0 */
-	u8		dma_channels __deprecated; /* number of dma channels */
-	u8		dyn_fifo_size;	/* dynamic size in bytes */
-	u8		vendor_ctrl __deprecated; /* vendor control reg width */
-	u8		vendor_stat __deprecated; /* vendor status reg witdh */
-	u8		dma_req_chan __deprecated; /* bitmask for required dma channels */
-	u8		ram_bits;	/* ram address size */
-
-	struct musb_hdrc_eps_bits *eps_bits __deprecated;
-#ifdef CONFIG_BLACKFIN
-	/* A GPIO controlling VRSEL in Blackfin */
-	unsigned int	gpio_vrsel;
-	unsigned int	gpio_vrsel_active;
-	/* musb CLKIN in Blackfin in MHZ */
-	unsigned char   clkin;
-#endif
-
-};
-
-struct musb_hdrc_platform_data {
-	/* MUSB_HOST, MUSB_PERIPHERAL, or MUSB_OTG */
-	u8		mode;
-
-	/* for clk_get() */
-	const char	*clock;
-
-	/* (HOST or OTG) switch VBUS on/off */
-	int		(*set_vbus)(struct device *dev, int is_on);
-
-	/* (HOST or OTG) mA/2 power supplied on (default = 8mA) */
-	u8		power;
-
-	/* (PERIPHERAL) mA/2 max power consumed (default = 100mA) */
-	u8		min_power;
-
-	/* (HOST or OTG) msec/2 after VBUS on till power good */
-	u8		potpgt;
-
-	/* (HOST or OTG) program PHY for external Vbus */
-	unsigned	extvbus:1;
-
-	/* Power the device on or off */
-	int		(*set_power)(int state);
-
-	/* MUSB configuration-specific details */
-	struct musb_hdrc_config	*config;
-
-	/* Architecture specific board data	*/
-	void		*board_data;
-
-	/* Platform specific struct musb_ops pointer */
-	const void	*platform_ops;
-};
-
-
-/* TUSB 6010 support */
-
-#define	TUSB6010_OSCCLK_60	16667	/* psec/clk @ 60.0 MHz */
-#define	TUSB6010_REFCLK_24	41667	/* psec/clk @ 24.0 MHz XI */
-#define	TUSB6010_REFCLK_19	52083	/* psec/clk @ 19.2 MHz CLKIN */
-
-#ifdef	CONFIG_ARCH_OMAP2
-
-extern int __init tusb6010_setup_interface(
-		struct musb_hdrc_platform_data *data,
-		unsigned ps_refclk, unsigned waitpin,
-		unsigned async_cs, unsigned sync_cs,
-		unsigned irq, unsigned dmachan);
-
-extern int tusb6010_platform_retime(unsigned is_refclk);
-
-#endif	/* OMAP2 */
-
-#endif /* __LINUX_USB_MUSB_H */
diff --git a/ANDROID_3.4.5/include/linux/usb/net2280.h b/ANDROID_3.4.5/include/linux/usb/net2280.h
deleted file mode 100644
index 148b8fa5..00000000
--- a/ANDROID_3.4.5/include/linux/usb/net2280.h
+++ /dev/null
@@ -1,443 +0,0 @@
-/*
- * NetChip 2280 high/full speed USB device controller.
- * Unlike many such controllers, this one talks PCI.
- *
- * Copyright (C) 2002 NetChip Technology, Inc. (http://www.netchip.com)
- * Copyright (C) 2003 David Brownell
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __LINUX_USB_NET2280_H
-#define __LINUX_USB_NET2280_H
-
-/*-------------------------------------------------------------------------*/
-
-/* NET2280 MEMORY MAPPED REGISTERS
- *
- * The register layout came from the chip documentation, and the bit
- * number definitions were extracted from chip specification.
- *
- * Use the shift operator ('<<') to build bit masks, with readl/writel
- * to access the registers through PCI.
- */
-
-/* main registers, BAR0 + 0x0000 */
-struct net2280_regs {
-	/* offset 0x0000 */
-	u32		devinit;
-#define     LOCAL_CLOCK_FREQUENCY                               8
-#define     FORCE_PCI_RESET                                     7
-#define     PCI_ID                                              6
-#define     PCI_ENABLE                                          5
-#define     FIFO_SOFT_RESET                                     4
-#define     CFG_SOFT_RESET                                      3
-#define     PCI_SOFT_RESET                                      2
-#define     USB_SOFT_RESET                                      1
-#define     M8051_RESET                                         0
-	u32		eectl;
-#define     EEPROM_ADDRESS_WIDTH                                23
-#define     EEPROM_CHIP_SELECT_ACTIVE                           22
-#define     EEPROM_PRESENT                                      21
-#define     EEPROM_VALID                                        20
-#define     EEPROM_BUSY                                         19
-#define     EEPROM_CHIP_SELECT_ENABLE                           18
-#define     EEPROM_BYTE_READ_START                              17
-#define     EEPROM_BYTE_WRITE_START                             16
-#define     EEPROM_READ_DATA                                    8
-#define     EEPROM_WRITE_DATA                                   0
-	u32		eeclkfreq;
-	u32		_unused0;
-	/* offset 0x0010 */
-
-	u32		pciirqenb0;		/* interrupt PCI master ... */
-#define     SETUP_PACKET_INTERRUPT_ENABLE                       7
-#define     ENDPOINT_F_INTERRUPT_ENABLE                         6
-#define     ENDPOINT_E_INTERRUPT_ENABLE                         5
-#define     ENDPOINT_D_INTERRUPT_ENABLE                         4
-#define     ENDPOINT_C_INTERRUPT_ENABLE                         3
-#define     ENDPOINT_B_INTERRUPT_ENABLE                         2
-#define     ENDPOINT_A_INTERRUPT_ENABLE                         1
-#define     ENDPOINT_0_INTERRUPT_ENABLE                         0
-	u32		pciirqenb1;
-#define     PCI_INTERRUPT_ENABLE                                31
-#define     POWER_STATE_CHANGE_INTERRUPT_ENABLE                 27
-#define     PCI_ARBITER_TIMEOUT_INTERRUPT_ENABLE                26
-#define     PCI_PARITY_ERROR_INTERRUPT_ENABLE                   25
-#define     PCI_MASTER_ABORT_RECEIVED_INTERRUPT_ENABLE          20
-#define     PCI_TARGET_ABORT_RECEIVED_INTERRUPT_ENABLE          19
-#define     PCI_TARGET_ABORT_ASSERTED_INTERRUPT_ENABLE          18
-#define     PCI_RETRY_ABORT_INTERRUPT_ENABLE                    17
-#define     PCI_MASTER_CYCLE_DONE_INTERRUPT_ENABLE              16
-#define     GPIO_INTERRUPT_ENABLE                               13
-#define     DMA_D_INTERRUPT_ENABLE                              12
-#define     DMA_C_INTERRUPT_ENABLE                              11
-#define     DMA_B_INTERRUPT_ENABLE                              10
-#define     DMA_A_INTERRUPT_ENABLE                              9
-#define     EEPROM_DONE_INTERRUPT_ENABLE                        8
-#define     VBUS_INTERRUPT_ENABLE                               7
-#define     CONTROL_STATUS_INTERRUPT_ENABLE                     6
-#define     ROOT_PORT_RESET_INTERRUPT_ENABLE                    4
-#define     SUSPEND_REQUEST_INTERRUPT_ENABLE                    3
-#define     SUSPEND_REQUEST_CHANGE_INTERRUPT_ENABLE             2
-#define     RESUME_INTERRUPT_ENABLE                             1
-#define     SOF_INTERRUPT_ENABLE                                0
-	u32		cpu_irqenb0;		/* ... or onboard 8051 */
-#define     SETUP_PACKET_INTERRUPT_ENABLE                       7
-#define     ENDPOINT_F_INTERRUPT_ENABLE                         6
-#define     ENDPOINT_E_INTERRUPT_ENABLE                         5
-#define     ENDPOINT_D_INTERRUPT_ENABLE                         4
-#define     ENDPOINT_C_INTERRUPT_ENABLE                         3
-#define     ENDPOINT_B_INTERRUPT_ENABLE                         2
-#define     ENDPOINT_A_INTERRUPT_ENABLE                         1
-#define     ENDPOINT_0_INTERRUPT_ENABLE                         0
-	u32		cpu_irqenb1;
-#define     CPU_INTERRUPT_ENABLE                                31
-#define     POWER_STATE_CHANGE_INTERRUPT_ENABLE                 27
-#define     PCI_ARBITER_TIMEOUT_INTERRUPT_ENABLE                26
-#define     PCI_PARITY_ERROR_INTERRUPT_ENABLE                   25
-#define     PCI_INTA_INTERRUPT_ENABLE                           24
-#define     PCI_PME_INTERRUPT_ENABLE                            23
-#define     PCI_SERR_INTERRUPT_ENABLE                           22
-#define     PCI_PERR_INTERRUPT_ENABLE                           21
-#define     PCI_MASTER_ABORT_RECEIVED_INTERRUPT_ENABLE          20
-#define     PCI_TARGET_ABORT_RECEIVED_INTERRUPT_ENABLE          19
-#define     PCI_RETRY_ABORT_INTERRUPT_ENABLE                    17
-#define     PCI_MASTER_CYCLE_DONE_INTERRUPT_ENABLE              16
-#define     GPIO_INTERRUPT_ENABLE                               13
-#define     DMA_D_INTERRUPT_ENABLE                              12
-#define     DMA_C_INTERRUPT_ENABLE                              11
-#define     DMA_B_INTERRUPT_ENABLE                              10
-#define     DMA_A_INTERRUPT_ENABLE                              9
-#define     EEPROM_DONE_INTERRUPT_ENABLE                        8
-#define     VBUS_INTERRUPT_ENABLE                               7
-#define     CONTROL_STATUS_INTERRUPT_ENABLE                     6
-#define     ROOT_PORT_RESET_INTERRUPT_ENABLE                    4
-#define     SUSPEND_REQUEST_INTERRUPT_ENABLE                    3
-#define     SUSPEND_REQUEST_CHANGE_INTERRUPT_ENABLE             2
-#define     RESUME_INTERRUPT_ENABLE                             1
-#define     SOF_INTERRUPT_ENABLE                                0
-
-	/* offset 0x0020 */
-	u32		_unused1;
-	u32		usbirqenb1;
-#define     USB_INTERRUPT_ENABLE                                31
-#define     POWER_STATE_CHANGE_INTERRUPT_ENABLE                 27
-#define     PCI_ARBITER_TIMEOUT_INTERRUPT_ENABLE                26
-#define     PCI_PARITY_ERROR_INTERRUPT_ENABLE                   25
-#define     PCI_INTA_INTERRUPT_ENABLE                           24
-#define     PCI_PME_INTERRUPT_ENABLE                            23
-#define     PCI_SERR_INTERRUPT_ENABLE                           22
-#define     PCI_PERR_INTERRUPT_ENABLE                           21
-#define     PCI_MASTER_ABORT_RECEIVED_INTERRUPT_ENABLE          20
-#define     PCI_TARGET_ABORT_RECEIVED_INTERRUPT_ENABLE          19
-#define     PCI_RETRY_ABORT_INTERRUPT_ENABLE                    17
-#define     PCI_MASTER_CYCLE_DONE_INTERRUPT_ENABLE              16
-#define     GPIO_INTERRUPT_ENABLE                               13
-#define     DMA_D_INTERRUPT_ENABLE                              12
-#define     DMA_C_INTERRUPT_ENABLE                              11
-#define     DMA_B_INTERRUPT_ENABLE                              10
-#define     DMA_A_INTERRUPT_ENABLE                              9
-#define     EEPROM_DONE_INTERRUPT_ENABLE                        8
-#define     VBUS_INTERRUPT_ENABLE                               7
-#define     CONTROL_STATUS_INTERRUPT_ENABLE                     6
-#define     ROOT_PORT_RESET_INTERRUPT_ENABLE                    4
-#define     SUSPEND_REQUEST_INTERRUPT_ENABLE                    3
-#define     SUSPEND_REQUEST_CHANGE_INTERRUPT_ENABLE             2
-#define     RESUME_INTERRUPT_ENABLE                             1
-#define     SOF_INTERRUPT_ENABLE                                0
-	u32		irqstat0;
-#define     INTA_ASSERTED                                       12
-#define     SETUP_PACKET_INTERRUPT                              7
-#define     ENDPOINT_F_INTERRUPT                                6
-#define     ENDPOINT_E_INTERRUPT                                5
-#define     ENDPOINT_D_INTERRUPT                                4
-#define     ENDPOINT_C_INTERRUPT                                3
-#define     ENDPOINT_B_INTERRUPT                                2
-#define     ENDPOINT_A_INTERRUPT                                1
-#define     ENDPOINT_0_INTERRUPT                                0
-	u32		irqstat1;
-#define     POWER_STATE_CHANGE_INTERRUPT                        27
-#define     PCI_ARBITER_TIMEOUT_INTERRUPT                       26
-#define     PCI_PARITY_ERROR_INTERRUPT                          25
-#define     PCI_INTA_INTERRUPT                                  24
-#define     PCI_PME_INTERRUPT                                   23
-#define     PCI_SERR_INTERRUPT                                  22
-#define     PCI_PERR_INTERRUPT                                  21
-#define     PCI_MASTER_ABORT_RECEIVED_INTERRUPT                 20
-#define     PCI_TARGET_ABORT_RECEIVED_INTERRUPT                 19
-#define     PCI_RETRY_ABORT_INTERRUPT                           17
-#define     PCI_MASTER_CYCLE_DONE_INTERRUPT                     16
-#define     SOF_DOWN_INTERRUPT                                  14
-#define     GPIO_INTERRUPT                                      13
-#define     DMA_D_INTERRUPT                                     12
-#define     DMA_C_INTERRUPT                                     11
-#define     DMA_B_INTERRUPT                                     10
-#define     DMA_A_INTERRUPT                                     9
-#define     EEPROM_DONE_INTERRUPT                               8
-#define     VBUS_INTERRUPT                                      7
-#define     CONTROL_STATUS_INTERRUPT                            6
-#define     ROOT_PORT_RESET_INTERRUPT                           4
-#define     SUSPEND_REQUEST_INTERRUPT                           3
-#define     SUSPEND_REQUEST_CHANGE_INTERRUPT                    2
-#define     RESUME_INTERRUPT                                    1
-#define     SOF_INTERRUPT                                       0
-	/* offset 0x0030 */
-	u32		idxaddr;
-	u32		idxdata;
-	u32		fifoctl;
-#define     PCI_BASE2_RANGE                                     16
-#define     IGNORE_FIFO_AVAILABILITY                            3
-#define     PCI_BASE2_SELECT                                    2
-#define     FIFO_CONFIGURATION_SELECT                           0
-	u32		_unused2;
-	/* offset 0x0040 */
-	u32		memaddr;
-#define     START                                               28
-#define     DIRECTION                                           27
-#define     FIFO_DIAGNOSTIC_SELECT                              24
-#define     MEMORY_ADDRESS                                      0
-	u32		memdata0;
-	u32		memdata1;
-	u32		_unused3;
-	/* offset 0x0050 */
-	u32		gpioctl;
-#define     GPIO3_LED_SELECT                                    12
-#define     GPIO3_INTERRUPT_ENABLE                              11
-#define     GPIO2_INTERRUPT_ENABLE                              10
-#define     GPIO1_INTERRUPT_ENABLE                              9
-#define     GPIO0_INTERRUPT_ENABLE                              8
-#define     GPIO3_OUTPUT_ENABLE                                 7
-#define     GPIO2_OUTPUT_ENABLE                                 6
-#define     GPIO1_OUTPUT_ENABLE                                 5
-#define     GPIO0_OUTPUT_ENABLE                                 4
-#define     GPIO3_DATA                                          3
-#define     GPIO2_DATA                                          2
-#define     GPIO1_DATA                                          1
-#define     GPIO0_DATA                                          0
-	u32		gpiostat;
-#define     GPIO3_INTERRUPT                                     3
-#define     GPIO2_INTERRUPT                                     2
-#define     GPIO1_INTERRUPT                                     1
-#define     GPIO0_INTERRUPT                                     0
-} __attribute__ ((packed));
-
-/* usb control, BAR0 + 0x0080 */
-struct net2280_usb_regs {
-	/* offset 0x0080 */
-	u32		stdrsp;
-#define     STALL_UNSUPPORTED_REQUESTS                          31
-#define     SET_TEST_MODE                                       16
-#define     GET_OTHER_SPEED_CONFIGURATION                       15
-#define     GET_DEVICE_QUALIFIER                                14
-#define     SET_ADDRESS                                         13
-#define     ENDPOINT_SET_CLEAR_HALT                             12
-#define     DEVICE_SET_CLEAR_DEVICE_REMOTE_WAKEUP               11
-#define     GET_STRING_DESCRIPTOR_2                             10
-#define     GET_STRING_DESCRIPTOR_1                             9
-#define     GET_STRING_DESCRIPTOR_0                             8
-#define     GET_SET_INTERFACE                                   6
-#define     GET_SET_CONFIGURATION                               5
-#define     GET_CONFIGURATION_DESCRIPTOR                        4
-#define     GET_DEVICE_DESCRIPTOR                               3
-#define     GET_ENDPOINT_STATUS                                 2
-#define     GET_INTERFACE_STATUS                                1
-#define     GET_DEVICE_STATUS                                   0
-	u32		prodvendid;
-#define     PRODUCT_ID                                          16
-#define     VENDOR_ID                                           0
-	u32		relnum;
-	u32		usbctl;
-#define     SERIAL_NUMBER_INDEX                                 16
-#define     PRODUCT_ID_STRING_ENABLE                            13
-#define     VENDOR_ID_STRING_ENABLE                             12
-#define     USB_ROOT_PORT_WAKEUP_ENABLE                         11
-#define     VBUS_PIN                                            10
-#define     TIMED_DISCONNECT                                    9
-#define     SUSPEND_IMMEDIATELY                                 7
-#define     SELF_POWERED_USB_DEVICE                             6
-#define     REMOTE_WAKEUP_SUPPORT                               5
-#define     PME_POLARITY                                        4
-#define     USB_DETECT_ENABLE                                   3
-#define     PME_WAKEUP_ENABLE                                   2
-#define     DEVICE_REMOTE_WAKEUP_ENABLE                         1
-#define     SELF_POWERED_STATUS                                 0
-	/* offset 0x0090 */
-	u32		usbstat;
-#define     HIGH_SPEED                                          7
-#define     FULL_SPEED                                          6
-#define     GENERATE_RESUME                                     5
-#define     GENERATE_DEVICE_REMOTE_WAKEUP                       4
-	u32		xcvrdiag;
-#define     FORCE_HIGH_SPEED_MODE                               31
-#define     FORCE_FULL_SPEED_MODE                               30
-#define     USB_TEST_MODE                                       24
-#define     LINE_STATE                                          16
-#define     TRANSCEIVER_OPERATION_MODE                          2
-#define     TRANSCEIVER_SELECT                                  1
-#define     TERMINATION_SELECT                                  0
-	u32		setup0123;
-	u32		setup4567;
-	/* offset 0x0090 */
-	u32		_unused0;
-	u32		ouraddr;
-#define     FORCE_IMMEDIATE                                     7
-#define     OUR_USB_ADDRESS                                     0
-	u32		ourconfig;
-} __attribute__ ((packed));
-
-/* pci control, BAR0 + 0x0100 */
-struct net2280_pci_regs {
-	/* offset 0x0100 */
-	u32		 pcimstctl;
-#define     PCI_ARBITER_PARK_SELECT                             13
-#define     PCI_MULTI LEVEL_ARBITER                             12
-#define     PCI_RETRY_ABORT_ENABLE                              11
-#define     DMA_MEMORY_WRITE_AND_INVALIDATE_ENABLE              10
-#define     DMA_READ_MULTIPLE_ENABLE                            9
-#define     DMA_READ_LINE_ENABLE                                8
-#define     PCI_MASTER_COMMAND_SELECT                           6
-#define         MEM_READ_OR_WRITE                                   0
-#define         IO_READ_OR_WRITE                                    1
-#define         CFG_READ_OR_WRITE                                   2
-#define     PCI_MASTER_START                                    5
-#define     PCI_MASTER_READ_WRITE                               4
-#define         PCI_MASTER_WRITE                                    0
-#define         PCI_MASTER_READ                                     1
-#define     PCI_MASTER_BYTE_WRITE_ENABLES                       0
-	u32		 pcimstaddr;
-	u32		 pcimstdata;
-	u32		 pcimststat;
-#define     PCI_ARBITER_CLEAR                                   2
-#define     PCI_EXTERNAL_ARBITER                                1
-#define     PCI_HOST_MODE                                       0
-} __attribute__ ((packed));
-
-/* dma control, BAR0 + 0x0180 ... array of four structs like this,
- * for channels 0..3.  see also struct net2280_dma:  descriptor
- * that can be loaded into some of these registers.
- */
-struct net2280_dma_regs {	/* [11.7] */
-	/* offset 0x0180, 0x01a0, 0x01c0, 0x01e0, */
-	u32		dmactl;
-#define     DMA_SCATTER_GATHER_DONE_INTERRUPT_ENABLE            25
-#define     DMA_CLEAR_COUNT_ENABLE                              21
-#define     DESCRIPTOR_POLLING_RATE                             19
-#define         POLL_CONTINUOUS                                     0
-#define         POLL_1_USEC                                         1
-#define         POLL_100_USEC                                       2
-#define         POLL_1_MSEC                                         3
-#define     DMA_VALID_BIT_POLLING_ENABLE                        18
-#define     DMA_VALID_BIT_ENABLE                                17
-#define     DMA_SCATTER_GATHER_ENABLE                           16
-#define     DMA_OUT_AUTO_START_ENABLE                           4
-#define     DMA_PREEMPT_ENABLE                                  3
-#define     DMA_FIFO_VALIDATE                                   2
-#define     DMA_ENABLE                                          1
-#define     DMA_ADDRESS_HOLD                                    0
-	u32		dmastat;
-#define     DMA_ABORT_DONE_INTERRUPT                            27
-#define     DMA_SCATTER_GATHER_DONE_INTERRUPT                   25
-#define     DMA_TRANSACTION_DONE_INTERRUPT                      24
-#define     DMA_ABORT                                           1
-#define     DMA_START                                           0
-	u32		_unused0[2];
-	/* offset 0x0190, 0x01b0, 0x01d0, 0x01f0, */
-	u32		dmacount;
-#define     VALID_BIT                                           31
-#define     DMA_DIRECTION                                       30
-#define     DMA_DONE_INTERRUPT_ENABLE                           29
-#define     END_OF_CHAIN                                        28
-#define         DMA_BYTE_COUNT_MASK                                 ((1<<24)-1)
-#define     DMA_BYTE_COUNT                                      0
-	u32		dmaaddr;
-	u32		dmadesc;
-	u32		_unused1;
-} __attribute__ ((packed));
-
-/* dedicated endpoint registers, BAR0 + 0x0200 */
-
-struct net2280_dep_regs {	/* [11.8] */
-	/* offset 0x0200, 0x0210, 0x220, 0x230, 0x240 */
-	u32		dep_cfg;
-	/* offset 0x0204, 0x0214, 0x224, 0x234, 0x244 */
-	u32		dep_rsp;
-	u32		_unused[2];
-} __attribute__ ((packed));
-
-/* configurable endpoint registers, BAR0 + 0x0300 ... array of seven structs
- * like this, for ep0 then the configurable endpoints A..F
- * ep0 reserved for control; E and F have only 64 bytes of fifo
- */
-struct net2280_ep_regs {	/* [11.9] */
-	/* offset 0x0300, 0x0320, 0x0340, 0x0360, 0x0380, 0x03a0, 0x03c0 */
-	u32		ep_cfg;
-#define     ENDPOINT_BYTE_COUNT                                 16
-#define     ENDPOINT_ENABLE                                     10
-#define     ENDPOINT_TYPE                                       8
-#define     ENDPOINT_DIRECTION                                  7
-#define     ENDPOINT_NUMBER                                     0
-	u32		ep_rsp;
-#define     SET_NAK_OUT_PACKETS                                 15
-#define     SET_EP_HIDE_STATUS_PHASE                            14
-#define     SET_EP_FORCE_CRC_ERROR                              13
-#define     SET_INTERRUPT_MODE                                  12
-#define     SET_CONTROL_STATUS_PHASE_HANDSHAKE                  11
-#define     SET_NAK_OUT_PACKETS_MODE                            10
-#define     SET_ENDPOINT_TOGGLE                                 9
-#define     SET_ENDPOINT_HALT                                   8
-#define     CLEAR_NAK_OUT_PACKETS                               7
-#define     CLEAR_EP_HIDE_STATUS_PHASE                          6
-#define     CLEAR_EP_FORCE_CRC_ERROR                            5
-#define     CLEAR_INTERRUPT_MODE                                4
-#define     CLEAR_CONTROL_STATUS_PHASE_HANDSHAKE                3
-#define     CLEAR_NAK_OUT_PACKETS_MODE                          2
-#define     CLEAR_ENDPOINT_TOGGLE                               1
-#define     CLEAR_ENDPOINT_HALT                                 0
-	u32		ep_irqenb;
-#define     SHORT_PACKET_OUT_DONE_INTERRUPT_ENABLE              6
-#define     SHORT_PACKET_TRANSFERRED_INTERRUPT_ENABLE           5
-#define     DATA_PACKET_RECEIVED_INTERRUPT_ENABLE               3
-#define     DATA_PACKET_TRANSMITTED_INTERRUPT_ENABLE            2
-#define     DATA_OUT_PING_TOKEN_INTERRUPT_ENABLE                1
-#define     DATA_IN_TOKEN_INTERRUPT_ENABLE                      0
-	u32		ep_stat;
-#define     FIFO_VALID_COUNT                                    24
-#define     HIGH_BANDWIDTH_OUT_TRANSACTION_PID                  22
-#define     TIMEOUT                                             21
-#define     USB_STALL_SENT                                      20
-#define     USB_IN_NAK_SENT                                     19
-#define     USB_IN_ACK_RCVD                                     18
-#define     USB_OUT_PING_NAK_SENT                               17
-#define     USB_OUT_ACK_SENT                                    16
-#define     FIFO_OVERFLOW                                       13
-#define     FIFO_UNDERFLOW                                      12
-#define     FIFO_FULL                                           11
-#define     FIFO_EMPTY                                          10
-#define     FIFO_FLUSH                                          9
-#define     SHORT_PACKET_OUT_DONE_INTERRUPT                     6
-#define     SHORT_PACKET_TRANSFERRED_INTERRUPT                  5
-#define     NAK_OUT_PACKETS                                     4
-#define     DATA_PACKET_RECEIVED_INTERRUPT                      3
-#define     DATA_PACKET_TRANSMITTED_INTERRUPT                   2
-#define     DATA_OUT_PING_TOKEN_INTERRUPT                       1
-#define     DATA_IN_TOKEN_INTERRUPT                             0
-	/* offset 0x0310, 0x0330, 0x0350, 0x0370, 0x0390, 0x03b0, 0x03d0 */
-	u32		ep_avail;
-	u32		ep_data;
-	u32		_unused0[2];
-} __attribute__ ((packed));
-
-#endif /* __LINUX_USB_NET2280_H */
diff --git a/ANDROID_3.4.5/include/linux/usb/ohci_pdriver.h b/ANDROID_3.4.5/include/linux/usb/ohci_pdriver.h
deleted file mode 100644
index 2808f2a9..00000000
--- a/ANDROID_3.4.5/include/linux/usb/ohci_pdriver.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- * Copyright (C) 2012 Hauke Mehrtens <hauke@hauke-m.de>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- * for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software Foundation,
- * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __USB_CORE_OHCI_PDRIVER_H
-#define __USB_CORE_OHCI_PDRIVER_H
-
-/**
- * struct usb_ohci_pdata - platform_data for generic ohci driver
- *
- * @big_endian_desc:	BE descriptors
- * @big_endian_mmio:	BE registers
- * @no_big_frame_no:	no big endian frame_no shift
- *
- * These are general configuration options for the OHCI controller. All of
- * these options are activating more or less workarounds for some hardware.
- */
-struct usb_ohci_pdata {
-	unsigned	big_endian_desc:1;
-	unsigned	big_endian_mmio:1;
-	unsigned	no_big_frame_no:1;
-};
-
-#endif /* __USB_CORE_OHCI_PDRIVER_H */
diff --git a/ANDROID_3.4.5/include/linux/usb/otg.h b/ANDROID_3.4.5/include/linux/usb/otg.h
deleted file mode 100644
index 38ab3f46..00000000
--- a/ANDROID_3.4.5/include/linux/usb/otg.h
+++ /dev/null
@@ -1,279 +0,0 @@
-/* USB OTG (On The Go) defines */
-/*
- *
- * These APIs may be used between USB controllers.  USB device drivers
- * (for either host or peripheral roles) don't use these calls; they
- * continue to use just usb_device and usb_gadget.
- */
-
-#ifndef __LINUX_USB_OTG_H
-#define __LINUX_USB_OTG_H
-
-#include <linux/notifier.h>
-
-/* OTG defines lots of enumeration states before device reset */
-enum usb_otg_state {
-	OTG_STATE_UNDEFINED = 0,
-
-	/* single-role peripheral, and dual-role default-b */
-	OTG_STATE_B_IDLE,
-	OTG_STATE_B_SRP_INIT,
-	OTG_STATE_B_PERIPHERAL,
-
-	/* extra dual-role default-b states */
-	OTG_STATE_B_WAIT_ACON,
-	OTG_STATE_B_HOST,
-
-	/* dual-role default-a */
-	OTG_STATE_A_IDLE,
-	OTG_STATE_A_WAIT_VRISE,
-	OTG_STATE_A_WAIT_BCON,
-	OTG_STATE_A_HOST,
-	OTG_STATE_A_SUSPEND,
-	OTG_STATE_A_PERIPHERAL,
-	OTG_STATE_A_WAIT_VFALL,
-	OTG_STATE_A_VBUS_ERR,
-};
-
-enum usb_phy_events {
-	USB_EVENT_NONE,         /* no events or cable disconnected */
-	USB_EVENT_VBUS,         /* vbus valid event */
-	USB_EVENT_ID,           /* id was grounded */
-	USB_EVENT_CHARGER,      /* usb dedicated charger */
-	USB_EVENT_ENUMERATED,   /* gadget driver enumerated */
-};
-
-struct usb_phy;
-
-/* for transceivers connected thru an ULPI interface, the user must
- * provide access ops
- */
-struct usb_phy_io_ops {
-	int (*read)(struct usb_phy *x, u32 reg);
-	int (*write)(struct usb_phy *x, u32 val, u32 reg);
-};
-
-struct usb_otg {
-	u8			default_a;
-
-	struct usb_phy		*phy;
-	struct usb_bus		*host;
-	struct usb_gadget	*gadget;
-
-	/* bind/unbind the host controller */
-	int	(*set_host)(struct usb_otg *otg, struct usb_bus *host);
-
-	/* bind/unbind the peripheral controller */
-	int	(*set_peripheral)(struct usb_otg *otg,
-					struct usb_gadget *gadget);
-
-	/* effective for A-peripheral, ignored for B devices */
-	int	(*set_vbus)(struct usb_otg *otg, bool enabled);
-
-	/* for B devices only:  start session with A-Host */
-	int	(*start_srp)(struct usb_otg *otg);
-
-	/* start or continue HNP role switch */
-	int	(*start_hnp)(struct usb_otg *otg);
-
-};
-
-/*
- * the otg driver needs to interact with both device side and host side
- * usb controllers.  it decides which controller is active at a given
- * moment, using the transceiver, ID signal, HNP and sometimes static
- * configuration information (including "board isn't wired for otg").
- */
-struct usb_phy {
-	struct device		*dev;
-	const char		*label;
-	unsigned int		 flags;
-
-	enum usb_otg_state	state;
-	enum usb_phy_events	last_event;
-
-	struct usb_otg		*otg;
-
-	struct device		*io_dev;
-	struct usb_phy_io_ops	*io_ops;
-	void __iomem		*io_priv;
-
-	/* for notification of usb_phy_events */
-	struct atomic_notifier_head	notifier;
-
-	/* to pass extra port status to the root hub */
-	u16			port_status;
-	u16			port_change;
-
-	/* initialize/shutdown the OTG controller */
-	int	(*init)(struct usb_phy *x);
-	void	(*shutdown)(struct usb_phy *x);
-
-	/* effective for B devices, ignored for A-peripheral */
-	int	(*set_power)(struct usb_phy *x,
-				unsigned mA);
-
-	/* for non-OTG B devices: set transceiver into suspend mode */
-	int	(*set_suspend)(struct usb_phy *x,
-				int suspend);
-
-};
-
-
-/* for board-specific init logic */
-extern int usb_set_transceiver(struct usb_phy *);
-
-#if defined(CONFIG_NOP_USB_XCEIV) || (defined(CONFIG_NOP_USB_XCEIV_MODULE) && defined(MODULE))
-/* sometimes transceivers are accessed only through e.g. ULPI */
-extern void usb_nop_xceiv_register(void);
-extern void usb_nop_xceiv_unregister(void);
-#else
-static inline void usb_nop_xceiv_register(void)
-{
-}
-
-static inline void usb_nop_xceiv_unregister(void)
-{
-}
-#endif
-
-/* helpers for direct access thru low-level io interface */
-static inline int usb_phy_io_read(struct usb_phy *x, u32 reg)
-{
-	if (x->io_ops && x->io_ops->read)
-		return x->io_ops->read(x, reg);
-
-	return -EINVAL;
-}
-
-static inline int usb_phy_io_write(struct usb_phy *x, u32 val, u32 reg)
-{
-	if (x->io_ops && x->io_ops->write)
-		return x->io_ops->write(x, val, reg);
-
-	return -EINVAL;
-}
-
-static inline int
-usb_phy_init(struct usb_phy *x)
-{
-	if (x->init)
-		return x->init(x);
-
-	return 0;
-}
-
-static inline void
-usb_phy_shutdown(struct usb_phy *x)
-{
-	if (x->shutdown)
-		x->shutdown(x);
-}
-
-/* for usb host and peripheral controller drivers */
-#ifdef CONFIG_USB_OTG_UTILS
-extern struct usb_phy *usb_get_transceiver(void);
-extern void usb_put_transceiver(struct usb_phy *);
-extern const char *otg_state_string(enum usb_otg_state state);
-#else
-static inline struct usb_phy *usb_get_transceiver(void)
-{
-	return NULL;
-}
-
-static inline void usb_put_transceiver(struct usb_phy *x)
-{
-}
-
-static inline const char *otg_state_string(enum usb_otg_state state)
-{
-	return NULL;
-}
-#endif
-
-/* Context: can sleep */
-static inline int
-otg_start_hnp(struct usb_otg *otg)
-{
-	if (otg && otg->start_hnp)
-		return otg->start_hnp(otg);
-
-	return -ENOTSUPP;
-}
-
-/* Context: can sleep */
-static inline int
-otg_set_vbus(struct usb_otg *otg, bool enabled)
-{
-	if (otg && otg->set_vbus)
-		return otg->set_vbus(otg, enabled);
-
-	return -ENOTSUPP;
-}
-
-/* for HCDs */
-static inline int
-otg_set_host(struct usb_otg *otg, struct usb_bus *host)
-{
-	if (otg && otg->set_host)
-		return otg->set_host(otg, host);
-
-	return -ENOTSUPP;
-}
-
-/* for usb peripheral controller drivers */
-
-/* Context: can sleep */
-static inline int
-otg_set_peripheral(struct usb_otg *otg, struct usb_gadget *periph)
-{
-	if (otg && otg->set_peripheral)
-		return otg->set_peripheral(otg, periph);
-
-	return -ENOTSUPP;
-}
-
-static inline int
-usb_phy_set_power(struct usb_phy *x, unsigned mA)
-{
-	if (x && x->set_power)
-		return x->set_power(x, mA);
-	return 0;
-}
-
-/* Context: can sleep */
-static inline int
-usb_phy_set_suspend(struct usb_phy *x, int suspend)
-{
-	if (x->set_suspend != NULL)
-		return x->set_suspend(x, suspend);
-	else
-		return 0;
-}
-
-static inline int
-otg_start_srp(struct usb_otg *otg)
-{
-	if (otg && otg->start_srp)
-		return otg->start_srp(otg);
-
-	return -ENOTSUPP;
-}
-
-/* notifiers */
-static inline int
-usb_register_notifier(struct usb_phy *x, struct notifier_block *nb)
-{
-	return atomic_notifier_chain_register(&x->notifier, nb);
-}
-
-static inline void
-usb_unregister_notifier(struct usb_phy *x, struct notifier_block *nb)
-{
-	atomic_notifier_chain_unregister(&x->notifier, nb);
-}
-
-/* for OTG controller drivers (and maybe other stuff) */
-extern int usb_bus_start_enum(struct usb_bus *bus, unsigned port_num);
-
-#endif /* __LINUX_USB_OTG_H */
diff --git a/ANDROID_3.4.5/include/linux/usb/quirks.h b/ANDROID_3.4.5/include/linux/usb/quirks.h
deleted file mode 100644
index 3e93de7e..00000000
--- a/ANDROID_3.4.5/include/linux/usb/quirks.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * This file holds the definitions of quirks found in USB devices.
- * Only quirks that affect the whole device, not an interface,
- * belong here.
- */
-
-#ifndef __LINUX_USB_QUIRKS_H
-#define __LINUX_USB_QUIRKS_H
-
-/* string descriptors must not be fetched using a 255-byte read */
-#define USB_QUIRK_STRING_FETCH_255	0x00000001
-
-/* device can't resume correctly so reset it instead */
-#define USB_QUIRK_RESET_RESUME		0x00000002
-
-/* device can't handle Set-Interface requests */
-#define USB_QUIRK_NO_SET_INTF		0x00000004
-
-/* device can't handle its Configuration or Interface strings */
-#define USB_QUIRK_CONFIG_INTF_STRINGS	0x00000008
-
-/*device will morph if reset, don't use reset for handling errors */
-#define USB_QUIRK_RESET_MORPHS		0x00000010
-
-/* device has more interface descriptions than the bNumInterfaces count,
-   and can't handle talking to these interfaces */
-#define USB_QUIRK_HONOR_BNUMINTERFACES	0x00000020
-
-/* device needs a pause during initialization, after we read the device
-   descriptor */
-#define USB_QUIRK_DELAY_INIT		0x00000040
-
-#endif /* __LINUX_USB_QUIRKS_H */
diff --git a/ANDROID_3.4.5/include/linux/usb/r8a66597.h b/ANDROID_3.4.5/include/linux/usb/r8a66597.h
deleted file mode 100644
index 55805f9d..00000000
--- a/ANDROID_3.4.5/include/linux/usb/r8a66597.h
+++ /dev/null
@@ -1,481 +0,0 @@
-/*
- * R8A66597 driver platform data
- *
- * Copyright (C) 2009  Renesas Solutions Corp.
- *
- * Author : Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- *
- */
-
-#ifndef __LINUX_USB_R8A66597_H
-#define __LINUX_USB_R8A66597_H
-
-#define R8A66597_PLATDATA_XTAL_12MHZ	0x01
-#define R8A66597_PLATDATA_XTAL_24MHZ	0x02
-#define R8A66597_PLATDATA_XTAL_48MHZ	0x03
-
-struct r8a66597_platdata {
-	/* This callback can control port power instead of DVSTCTR register. */
-	void (*port_power)(int port, int power);
-
-	/* This parameter is for BUSWAIT */
-	u16		buswait;
-
-	/* set one = on chip controller, set zero = external controller */
-	unsigned	on_chip:1;
-
-	/* (external controller only) set R8A66597_PLATDATA_XTAL_nnMHZ */
-	unsigned	xtal:2;
-
-	/* set one = 3.3V, set zero = 1.5V */
-	unsigned	vif:1;
-
-	/* set one = big endian, set zero = little endian */
-	unsigned	endian:1;
-
-	/* (external controller only) set one = WR0_N shorted to WR1_N */
-	unsigned	wr0_shorted_to_wr1:1;
-
-	/* set one = using SUDMAC */
-	unsigned	sudmac:1;
-};
-
-/* Register definitions */
-#define SYSCFG0		0x00
-#define SYSCFG1		0x02
-#define SYSSTS0		0x04
-#define SYSSTS1		0x06
-#define DVSTCTR0	0x08
-#define DVSTCTR1	0x0A
-#define TESTMODE	0x0C
-#define PINCFG		0x0E
-#define DMA0CFG		0x10
-#define DMA1CFG		0x12
-#define CFIFO		0x14
-#define D0FIFO		0x18
-#define D1FIFO		0x1C
-#define CFIFOSEL	0x20
-#define CFIFOCTR	0x22
-#define CFIFOSIE	0x24
-#define D0FIFOSEL	0x28
-#define D0FIFOCTR	0x2A
-#define D1FIFOSEL	0x2C
-#define D1FIFOCTR	0x2E
-#define INTENB0		0x30
-#define INTENB1		0x32
-#define INTENB2		0x34
-#define BRDYENB		0x36
-#define NRDYENB		0x38
-#define BEMPENB		0x3A
-#define SOFCFG		0x3C
-#define INTSTS0		0x40
-#define INTSTS1		0x42
-#define INTSTS2		0x44
-#define BRDYSTS		0x46
-#define NRDYSTS		0x48
-#define BEMPSTS		0x4A
-#define FRMNUM		0x4C
-#define UFRMNUM		0x4E
-#define USBADDR		0x50
-#define USBREQ		0x54
-#define USBVAL		0x56
-#define USBINDX		0x58
-#define USBLENG		0x5A
-#define DCPCFG		0x5C
-#define DCPMAXP		0x5E
-#define DCPCTR		0x60
-#define PIPESEL		0x64
-#define PIPECFG		0x68
-#define PIPEBUF		0x6A
-#define PIPEMAXP	0x6C
-#define PIPEPERI	0x6E
-#define PIPE1CTR	0x70
-#define PIPE2CTR	0x72
-#define PIPE3CTR	0x74
-#define PIPE4CTR	0x76
-#define PIPE5CTR	0x78
-#define PIPE6CTR	0x7A
-#define PIPE7CTR	0x7C
-#define PIPE8CTR	0x7E
-#define PIPE9CTR	0x80
-#define PIPE1TRE	0x90
-#define PIPE1TRN	0x92
-#define PIPE2TRE	0x94
-#define PIPE2TRN	0x96
-#define PIPE3TRE	0x98
-#define PIPE3TRN	0x9A
-#define PIPE4TRE	0x9C
-#define	PIPE4TRN	0x9E
-#define	PIPE5TRE	0xA0
-#define	PIPE5TRN	0xA2
-#define DEVADD0		0xD0
-#define DEVADD1		0xD2
-#define DEVADD2		0xD4
-#define DEVADD3		0xD6
-#define DEVADD4		0xD8
-#define DEVADD5		0xDA
-#define DEVADD6		0xDC
-#define DEVADD7		0xDE
-#define DEVADD8		0xE0
-#define DEVADD9		0xE2
-#define DEVADDA		0xE4
-
-/* System Configuration Control Register */
-#define	XTAL		0xC000	/* b15-14: Crystal selection */
-#define	  XTAL48	 0x8000	  /* 48MHz */
-#define	  XTAL24	 0x4000	  /* 24MHz */
-#define	  XTAL12	 0x0000	  /* 12MHz */
-#define	XCKE		0x2000	/* b13: External clock enable */
-#define	PLLC		0x0800	/* b11: PLL control */
-#define	SCKE		0x0400	/* b10: USB clock enable */
-#define	PCSDIS		0x0200	/* b9: not CS wakeup */
-#define	LPSME		0x0100	/* b8: Low power sleep mode */
-#define	HSE		0x0080	/* b7: Hi-speed enable */
-#define	DCFM		0x0040	/* b6: Controller function select  */
-#define	DRPD		0x0020	/* b5: D+/- pull down control */
-#define	DPRPU		0x0010	/* b4: D+ pull up control */
-#define	USBE		0x0001	/* b0: USB module operation enable */
-
-/* System Configuration Status Register */
-#define	OVCBIT		0x8000	/* b15-14: Over-current bit */
-#define	OVCMON		0xC000	/* b15-14: Over-current monitor */
-#define	SOFEA		0x0020	/* b5: SOF monitor */
-#define	IDMON		0x0004	/* b3: ID-pin monitor */
-#define	LNST		0x0003	/* b1-0: D+, D- line status */
-#define	  SE1		 0x0003	  /* SE1 */
-#define	  FS_KSTS	 0x0002	  /* Full-Speed K State */
-#define	  FS_JSTS	 0x0001	  /* Full-Speed J State */
-#define	  LS_JSTS	 0x0002	  /* Low-Speed J State */
-#define	  LS_KSTS	 0x0001	  /* Low-Speed K State */
-#define	  SE0		 0x0000	  /* SE0 */
-
-/* Device State Control Register */
-#define	EXTLP0		0x0400	/* b10: External port */
-#define	VBOUT		0x0200	/* b9: VBUS output */
-#define	WKUP		0x0100	/* b8: Remote wakeup */
-#define	RWUPE		0x0080	/* b7: Remote wakeup sense */
-#define	USBRST		0x0040	/* b6: USB reset enable */
-#define	RESUME		0x0020	/* b5: Resume enable */
-#define	UACT		0x0010	/* b4: USB bus enable */
-#define	RHST		0x0007	/* b1-0: Reset handshake status */
-#define	  HSPROC	 0x0004	  /* HS handshake is processing */
-#define	  HSMODE	 0x0003	  /* Hi-Speed mode */
-#define	  FSMODE	 0x0002	  /* Full-Speed mode */
-#define	  LSMODE	 0x0001	  /* Low-Speed mode */
-#define	  UNDECID	 0x0000	  /* Undecided */
-
-/* Test Mode Register */
-#define	UTST			0x000F	/* b3-0: Test select */
-#define	  H_TST_PACKET		 0x000C	  /* HOST TEST Packet */
-#define	  H_TST_SE0_NAK		 0x000B	  /* HOST TEST SE0 NAK */
-#define	  H_TST_K		 0x000A	  /* HOST TEST K */
-#define	  H_TST_J		 0x0009	  /* HOST TEST J */
-#define	  H_TST_NORMAL		 0x0000	  /* HOST Normal Mode */
-#define	  P_TST_PACKET		 0x0004	  /* PERI TEST Packet */
-#define	  P_TST_SE0_NAK		 0x0003	  /* PERI TEST SE0 NAK */
-#define	  P_TST_K		 0x0002	  /* PERI TEST K */
-#define	  P_TST_J		 0x0001	  /* PERI TEST J */
-#define	  P_TST_NORMAL		 0x0000	  /* PERI Normal Mode */
-
-/* Data Pin Configuration Register */
-#define	LDRV			0x8000	/* b15: Drive Current Adjust */
-#define	  VIF1			  0x0000		/* VIF = 1.8V */
-#define	  VIF3			  0x8000		/* VIF = 3.3V */
-#define	INTA			0x0001	/* b1: USB INT-pin active */
-
-/* DMAx Pin Configuration Register */
-#define	DREQA			0x4000	/* b14: Dreq active select */
-#define	BURST			0x2000	/* b13: Burst mode */
-#define	DACKA			0x0400	/* b10: Dack active select */
-#define	DFORM			0x0380	/* b9-7: DMA mode select */
-#define	  CPU_ADR_RD_WR		 0x0000	  /* Address + RD/WR mode (CPU bus) */
-#define	  CPU_DACK_RD_WR	 0x0100	  /* DACK + RD/WR mode (CPU bus) */
-#define	  CPU_DACK_ONLY		 0x0180	  /* DACK only mode (CPU bus) */
-#define	  SPLIT_DACK_ONLY	 0x0200	  /* DACK only mode (SPLIT bus) */
-#define	DENDA			0x0040	/* b6: Dend active select */
-#define	PKTM			0x0020	/* b5: Packet mode */
-#define	DENDE			0x0010	/* b4: Dend enable */
-#define	OBUS			0x0004	/* b2: OUTbus mode */
-
-/* CFIFO/DxFIFO Port Select Register */
-#define	RCNT		0x8000	/* b15: Read count mode */
-#define	REW		0x4000	/* b14: Buffer rewind */
-#define	DCLRM		0x2000	/* b13: DMA buffer clear mode */
-#define	DREQE		0x1000	/* b12: DREQ output enable */
-#define	  MBW_8		 0x0000	  /*  8bit */
-#define	  MBW_16	 0x0400	  /* 16bit */
-#define	  MBW_32	 0x0800   /* 32bit */
-#define	BIGEND		0x0100	/* b8: Big endian mode */
-#define	  BYTE_LITTLE	 0x0000		/* little dendian */
-#define	  BYTE_BIG	 0x0100		/* big endifan */
-#define	ISEL		0x0020	/* b5: DCP FIFO port direction select */
-#define	CURPIPE		0x000F	/* b2-0: PIPE select */
-
-/* CFIFO/DxFIFO Port Control Register */
-#define	BVAL		0x8000	/* b15: Buffer valid flag */
-#define	BCLR		0x4000	/* b14: Buffer clear */
-#define	FRDY		0x2000	/* b13: FIFO ready */
-#define	DTLN		0x0FFF	/* b11-0: FIFO received data length */
-
-/* Interrupt Enable Register 0 */
-#define	VBSE	0x8000	/* b15: VBUS interrupt */
-#define	RSME	0x4000	/* b14: Resume interrupt */
-#define	SOFE	0x2000	/* b13: Frame update interrupt */
-#define	DVSE	0x1000	/* b12: Device state transition interrupt */
-#define	CTRE	0x0800	/* b11: Control transfer stage transition interrupt */
-#define	BEMPE	0x0400	/* b10: Buffer empty interrupt */
-#define	NRDYE	0x0200	/* b9: Buffer not ready interrupt */
-#define	BRDYE	0x0100	/* b8: Buffer ready interrupt */
-
-/* Interrupt Enable Register 1 */
-#define	OVRCRE		0x8000	/* b15: Over-current interrupt */
-#define	BCHGE		0x4000	/* b14: USB us chenge interrupt */
-#define	DTCHE		0x1000	/* b12: Detach sense interrupt */
-#define	ATTCHE		0x0800	/* b11: Attach sense interrupt */
-#define	EOFERRE		0x0040	/* b6: EOF error interrupt */
-#define	SIGNE		0x0020	/* b5: SETUP IGNORE interrupt */
-#define	SACKE		0x0010	/* b4: SETUP ACK interrupt */
-
-/* BRDY Interrupt Enable/Status Register */
-#define	BRDY9		0x0200	/* b9: PIPE9 */
-#define	BRDY8		0x0100	/* b8: PIPE8 */
-#define	BRDY7		0x0080	/* b7: PIPE7 */
-#define	BRDY6		0x0040	/* b6: PIPE6 */
-#define	BRDY5		0x0020	/* b5: PIPE5 */
-#define	BRDY4		0x0010	/* b4: PIPE4 */
-#define	BRDY3		0x0008	/* b3: PIPE3 */
-#define	BRDY2		0x0004	/* b2: PIPE2 */
-#define	BRDY1		0x0002	/* b1: PIPE1 */
-#define	BRDY0		0x0001	/* b1: PIPE0 */
-
-/* NRDY Interrupt Enable/Status Register */
-#define	NRDY9		0x0200	/* b9: PIPE9 */
-#define	NRDY8		0x0100	/* b8: PIPE8 */
-#define	NRDY7		0x0080	/* b7: PIPE7 */
-#define	NRDY6		0x0040	/* b6: PIPE6 */
-#define	NRDY5		0x0020	/* b5: PIPE5 */
-#define	NRDY4		0x0010	/* b4: PIPE4 */
-#define	NRDY3		0x0008	/* b3: PIPE3 */
-#define	NRDY2		0x0004	/* b2: PIPE2 */
-#define	NRDY1		0x0002	/* b1: PIPE1 */
-#define	NRDY0		0x0001	/* b1: PIPE0 */
-
-/* BEMP Interrupt Enable/Status Register */
-#define	BEMP9		0x0200	/* b9: PIPE9 */
-#define	BEMP8		0x0100	/* b8: PIPE8 */
-#define	BEMP7		0x0080	/* b7: PIPE7 */
-#define	BEMP6		0x0040	/* b6: PIPE6 */
-#define	BEMP5		0x0020	/* b5: PIPE5 */
-#define	BEMP4		0x0010	/* b4: PIPE4 */
-#define	BEMP3		0x0008	/* b3: PIPE3 */
-#define	BEMP2		0x0004	/* b2: PIPE2 */
-#define	BEMP1		0x0002	/* b1: PIPE1 */
-#define	BEMP0		0x0001	/* b0: PIPE0 */
-
-/* SOF Pin Configuration Register */
-#define	TRNENSEL	0x0100	/* b8: Select transaction enable period */
-#define	BRDYM		0x0040	/* b6: BRDY clear timing */
-#define	INTL		0x0020	/* b5: Interrupt sense select */
-#define	EDGESTS		0x0010	/* b4:  */
-#define	SOFMODE		0x000C	/* b3-2: SOF pin select */
-#define	  SOF_125US	 0x0008	  /* SOF OUT 125us Frame Signal */
-#define	  SOF_1MS	 0x0004	  /* SOF OUT 1ms Frame Signal */
-#define	  SOF_DISABLE	 0x0000	  /* SOF OUT Disable */
-
-/* Interrupt Status Register 0 */
-#define	VBINT	0x8000	/* b15: VBUS interrupt */
-#define	RESM	0x4000	/* b14: Resume interrupt */
-#define	SOFR	0x2000	/* b13: SOF frame update interrupt */
-#define	DVST	0x1000	/* b12: Device state transition interrupt */
-#define	CTRT	0x0800	/* b11: Control transfer stage transition interrupt */
-#define	BEMP	0x0400	/* b10: Buffer empty interrupt */
-#define	NRDY	0x0200	/* b9: Buffer not ready interrupt */
-#define	BRDY	0x0100	/* b8: Buffer ready interrupt */
-#define	VBSTS	0x0080	/* b7: VBUS input port */
-#define	DVSQ	0x0070	/* b6-4: Device state */
-#define	  DS_SPD_CNFG	 0x0070	  /* Suspend Configured */
-#define	  DS_SPD_ADDR	 0x0060	  /* Suspend Address */
-#define	  DS_SPD_DFLT	 0x0050	  /* Suspend Default */
-#define	  DS_SPD_POWR	 0x0040	  /* Suspend Powered */
-#define	  DS_SUSP	 0x0040	  /* Suspend */
-#define	  DS_CNFG	 0x0030	  /* Configured */
-#define	  DS_ADDS	 0x0020	  /* Address */
-#define	  DS_DFLT	 0x0010	  /* Default */
-#define	  DS_POWR	 0x0000	  /* Powered */
-#define	DVSQS		0x0030	/* b5-4: Device state */
-#define	VALID		0x0008	/* b3: Setup packet detected flag */
-#define	CTSQ		0x0007	/* b2-0: Control transfer stage */
-#define	  CS_SQER	 0x0006	  /* Sequence error */
-#define	  CS_WRND	 0x0005	  /* Control write nodata status stage */
-#define	  CS_WRSS	 0x0004	  /* Control write status stage */
-#define	  CS_WRDS	 0x0003	  /* Control write data stage */
-#define	  CS_RDSS	 0x0002	  /* Control read status stage */
-#define	  CS_RDDS	 0x0001	  /* Control read data stage */
-#define	  CS_IDST	 0x0000	  /* Idle or setup stage */
-
-/* Interrupt Status Register 1 */
-#define	OVRCR		0x8000	/* b15: Over-current interrupt */
-#define	BCHG		0x4000	/* b14: USB bus chenge interrupt */
-#define	DTCH		0x1000	/* b12: Detach sense interrupt */
-#define	ATTCH		0x0800	/* b11: Attach sense interrupt */
-#define	EOFERR		0x0040	/* b6: EOF-error interrupt */
-#define	SIGN		0x0020	/* b5: Setup ignore interrupt */
-#define	SACK		0x0010	/* b4: Setup acknowledge interrupt */
-
-/* Frame Number Register */
-#define	OVRN		0x8000	/* b15: Overrun error */
-#define	CRCE		0x4000	/* b14: Received data error */
-#define	FRNM		0x07FF	/* b10-0: Frame number */
-
-/* Micro Frame Number Register */
-#define	UFRNM		0x0007	/* b2-0: Micro frame number */
-
-/* Default Control Pipe Maxpacket Size Register */
-/* Pipe Maxpacket Size Register */
-#define	DEVSEL	0xF000	/* b15-14: Device address select */
-#define	MAXP	0x007F	/* b6-0: Maxpacket size of default control pipe */
-
-/* Default Control Pipe Control Register */
-#define	BSTS		0x8000	/* b15: Buffer status */
-#define	SUREQ		0x4000	/* b14: Send USB request  */
-#define	CSCLR		0x2000	/* b13: complete-split status clear */
-#define	CSSTS		0x1000	/* b12: complete-split status */
-#define	SUREQCLR	0x0800	/* b11: stop setup request */
-#define	SQCLR		0x0100	/* b8: Sequence toggle bit clear */
-#define	SQSET		0x0080	/* b7: Sequence toggle bit set */
-#define	SQMON		0x0040	/* b6: Sequence toggle bit monitor */
-#define	PBUSY		0x0020	/* b5: pipe busy */
-#define	PINGE		0x0010	/* b4: ping enable */
-#define	CCPL		0x0004	/* b2: Enable control transfer complete */
-#define	PID		0x0003	/* b1-0: Response PID */
-#define	  PID_STALL11	 0x0003	  /* STALL */
-#define	  PID_STALL	 0x0002	  /* STALL */
-#define	  PID_BUF	 0x0001	  /* BUF */
-#define	  PID_NAK	 0x0000	  /* NAK */
-
-/* Pipe Window Select Register */
-#define	PIPENM		0x0007	/* b2-0: Pipe select */
-
-/* Pipe Configuration Register */
-#define	R8A66597_TYP	0xC000	/* b15-14: Transfer type */
-#define	  R8A66597_ISO	 0xC000		  /* Isochronous */
-#define	  R8A66597_INT	 0x8000		  /* Interrupt */
-#define	  R8A66597_BULK	 0x4000		  /* Bulk */
-#define	R8A66597_BFRE	0x0400	/* b10: Buffer ready interrupt mode select */
-#define	R8A66597_DBLB	0x0200	/* b9: Double buffer mode select */
-#define	R8A66597_CNTMD	0x0100	/* b8: Continuous transfer mode select */
-#define	R8A66597_SHTNAK	0x0080	/* b7: Transfer end NAK */
-#define	R8A66597_DIR	0x0010	/* b4: Transfer direction select */
-#define	R8A66597_EPNUM	0x000F	/* b3-0: Eendpoint number select */
-
-/* Pipe Buffer Configuration Register */
-#define	BUFSIZE		0x7C00	/* b14-10: Pipe buffer size */
-#define	BUFNMB		0x007F	/* b6-0: Pipe buffer number */
-#define	PIPE0BUF	256
-#define	PIPExBUF	64
-
-/* Pipe Maxpacket Size Register */
-#define	MXPS		0x07FF	/* b10-0: Maxpacket size */
-
-/* Pipe Cycle Configuration Register */
-#define	IFIS	0x1000	/* b12: Isochronous in-buffer flush mode select */
-#define	IITV	0x0007	/* b2-0: Isochronous interval */
-
-/* Pipex Control Register */
-#define	BSTS	0x8000	/* b15: Buffer status */
-#define	INBUFM	0x4000	/* b14: IN buffer monitor (Only for PIPE1 to 5) */
-#define	CSCLR	0x2000	/* b13: complete-split status clear */
-#define	CSSTS	0x1000	/* b12: complete-split status */
-#define	ATREPM	0x0400	/* b10: Auto repeat mode */
-#define	ACLRM	0x0200	/* b9: Out buffer auto clear mode */
-#define	SQCLR	0x0100	/* b8: Sequence toggle bit clear */
-#define	SQSET	0x0080	/* b7: Sequence toggle bit set */
-#define	SQMON	0x0040	/* b6: Sequence toggle bit monitor */
-#define	PBUSY	0x0020	/* b5: pipe busy */
-#define	PID	0x0003	/* b1-0: Response PID */
-
-/* PIPExTRE */
-#define	TRENB		0x0200	/* b9: Transaction counter enable */
-#define	TRCLR		0x0100	/* b8: Transaction counter clear */
-
-/* PIPExTRN */
-#define	TRNCNT		0xFFFF	/* b15-0: Transaction counter */
-
-/* DEVADDx */
-#define	UPPHUB		0x7800
-#define	HUBPORT		0x0700
-#define	USBSPD		0x00C0
-#define	RTPORT		0x0001
-
-/* SUDMAC registers */
-#define CH0CFG		0x00
-#define CH1CFG		0x04
-#define CH0BA		0x10
-#define CH1BA		0x14
-#define CH0BBC		0x18
-#define CH1BBC		0x1C
-#define CH0CA		0x20
-#define CH1CA		0x24
-#define CH0CBC		0x28
-#define CH1CBC		0x2C
-#define CH0DEN		0x30
-#define CH1DEN		0x34
-#define DSTSCLR		0x38
-#define DBUFCTRL	0x3C
-#define DINTCTRL	0x40
-#define DINTSTS		0x44
-#define DINTSTSCLR	0x48
-#define CH0SHCTRL	0x50
-#define CH1SHCTRL	0x54
-
-/* SUDMAC Configuration Registers */
-#define SENDBUFM	0x1000 /* b12: Transmit Buffer Mode */
-#define RCVENDM		0x0100 /* b8: Receive Data Transfer End Mode */
-#define LBA_WAIT	0x0030 /* b5-4: Local Bus Access Wait */
-
-/* DMA Enable Registers */
-#define DEN		0x0001 /* b1: DMA Transfer Enable */
-
-/* DMA Status Clear Register */
-#define CH1STCLR	0x0002 /* b2: Ch1 DMA Status Clear */
-#define CH0STCLR	0x0001 /* b1: Ch0 DMA Status Clear */
-
-/* DMA Buffer Control Register */
-#define CH1BUFW		0x0200 /* b9: Ch1 DMA Buffer Data Transfer Enable */
-#define CH0BUFW		0x0100 /* b8: Ch0 DMA Buffer Data Transfer Enable */
-#define CH1BUFS		0x0002 /* b2: Ch1 DMA Buffer Data Status */
-#define CH0BUFS		0x0001 /* b1: Ch0 DMA Buffer Data Status */
-
-/* DMA Interrupt Control Register */
-#define CH1ERRE		0x0200 /* b9: Ch1 SHwy Res Err Detect Int Enable */
-#define CH0ERRE		0x0100 /* b8: Ch0 SHwy Res Err Detect Int Enable */
-#define CH1ENDE		0x0002 /* b2: Ch1 DMA Transfer End Int Enable */
-#define CH0ENDE		0x0001 /* b1: Ch0 DMA Transfer End Int Enable */
-
-/* DMA Interrupt Status Register */
-#define CH1ERRS		0x0200 /* b9: Ch1 SHwy Res Err Detect Int Status */
-#define CH0ERRS		0x0100 /* b8: Ch0 SHwy Res Err Detect Int Status */
-#define CH1ENDS		0x0002 /* b2: Ch1 DMA Transfer End Int Status */
-#define CH0ENDS		0x0001 /* b1: Ch0 DMA Transfer End Int Status */
-
-/* DMA Interrupt Status Clear Register */
-#define CH1ERRC		0x0200 /* b9: Ch1 SHwy Res Err Detect Int Stat Clear */
-#define CH0ERRC		0x0100 /* b8: Ch0 SHwy Res Err Detect Int Stat Clear */
-#define CH1ENDC		0x0002 /* b2: Ch1 DMA Transfer End Int Stat Clear */
-#define CH0ENDC		0x0001 /* b1: Ch0 DMA Transfer End Int Stat Clear */
-
-#endif /* __LINUX_USB_R8A66597_H */
-
diff --git a/ANDROID_3.4.5/include/linux/usb/rawbulk.h b/ANDROID_3.4.5/include/linux/usb/rawbulk.h
deleted file mode 100755
index 05a22b10..00000000
--- a/ANDROID_3.4.5/include/linux/usb/rawbulk.h
+++ /dev/null
@@ -1,166 +0,0 @@
-/*
- * Rawbulk Driver from VIA Telecom
- *
- * Copyright (C) 2011 VIA Telecom, Inc.
- * Author: Karfield Chen (kfchen@via-telecom.com)
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __RAWBULK_H__
-#define __RAWBULK_H__
-
-#include <linux/usb.h>
-#include <linux/usb/ch9.h>
-#include <linux/usb/composite.h>
-#include <linux/usb/gadget.h>
-#include <linux/wakelock.h>
-#include <linux/device.h>
-#include <linux/tty.h>
-#include <linux/tty_driver.h>
-
-#define INTF_DESC       0
-#define BULKIN_DESC     1
-#define BULKOUT_DESC    2
-#define MAX_DESC_ARRAY  4
-
-#define NAME_BUFFSIZE   64
-#define MAX_ATTRIBUTES    10
-
-#define MAX_TTY_RX          4
-#define MAX_TTY_RX_PACKAGE  512
-#define MAX_TTY_TX          8
-#define MAX_TTY_TX_PACKAGE  64
-
-struct rawbulk_function {
-    int transfer_id;
-    const char *longname;
-    const char *shortname;
-    struct device *dev;
-
-    /* Controls */
-    spinlock_t lock;
-    int enable: 1;
-    int activated: 1; /* set when usb enabled */
-    int tty_opened: 1;
-
-    struct work_struct activator; /* asynic transaction starter */
-
-    struct wake_lock keep_awake;
-
-    /* USB Gadget related */
-    struct usb_function function;
-    struct usb_composite_dev *cdev;
-    struct usb_ep *bulk_out, *bulk_in;
-
-    int rts_state;          /* Handshaking pins (outputs) */
-    int dtr_state;
-    int cts_state;                   /* Handshaking pins (inputs) */
-    int dsr_state;
-    int dcd_state;
-    int ri_state;
-
-    /* TTY related */
-    struct tty_struct *tty;
-    int tty_minor;
-    struct tty_port port;
-    spinlock_t tx_lock;
-    struct list_head tx_free;
-    struct list_head tx_inproc;
-    spinlock_t rx_lock;
-    struct list_head rx_free;
-    struct list_head rx_inproc;
-    struct list_head rx_throttled;
-    unsigned int last_pushed;
-
-    /* Transfer Controls */
-    int nups;
-    int ndowns;
-    int upsz;
-    int downsz;
-    int splitsz;
-    int autoreconn;
-    int pushable;   /* Set to use push-way for upstream */
-
-    /* Descriptors and Strings */
-    struct usb_descriptor_header *fs_descs[MAX_DESC_ARRAY];
-    struct usb_descriptor_header *hs_descs[MAX_DESC_ARRAY];
-    struct usb_string string_defs[2];
-    struct usb_gadget_strings string_table;
-    struct usb_gadget_strings *strings[2];
-    struct usb_interface_descriptor interface;
-    struct usb_endpoint_descriptor fs_bulkin_endpoint;
-    struct usb_endpoint_descriptor hs_bulkin_endpoint;
-    struct usb_endpoint_descriptor fs_bulkout_endpoint;
-    struct usb_endpoint_descriptor hs_bulkout_endpoint;
-
-    /* Sysfs Accesses */
-    int max_attrs;
-    struct device_attribute attr[MAX_ATTRIBUTES];
-};
-
-enum transfer_id {
-    RAWBULK_TID_MODEM,
-    RAWBULK_TID_ETS,
-    RAWBULK_TID_AT,
-    RAWBULK_TID_PCV,
-    RAWBULK_TID_GPS,
-    _MAX_TID
-};
-
-#define RAWBULK_INCEPT_FLAG_ENABLE          0x01
-#define RAWBULK_INCEPT_FLAG_PUSH_WAY        0x02
-typedef int (*rawbulk_intercept_t)(struct usb_interface *interface, unsigned int flags);
-typedef void (*rawbulk_autoreconn_callback_t)(int transfer_id);
-
-struct rawbulk_function *rawbulk_lookup_function(int transfer_id);
-
-/* rawbulk tty io */
-int rawbulk_register_tty(struct rawbulk_function *fn);
-void rawbulk_unregister_tty(struct rawbulk_function *fn);
-
-int rawbulk_tty_stop_io(struct rawbulk_function *fn);
-int rawbulk_tty_start_io(struct rawbulk_function *fn);
-int rawbulk_tty_alloc_request(struct rawbulk_function *fn);
-void rawbulk_tty_free_request(struct rawbulk_function *fn);
-
-/* bind/unbind for gadget */
-int rawbulk_bind_function(int transfer_id, struct usb_function *function,
-        struct usb_ep *bulk_out, struct usb_ep *bulk_in,
-        rawbulk_autoreconn_callback_t autoreconn_callback);
-void rawbulk_unbind_function(int trasfer_id);
-int rawbulk_check_enable(struct rawbulk_function *fn);
-void rawbulk_disable_function(struct rawbulk_function *fn);
-
-/* bind/unbind host interfaces */
-int rawbulk_bind_host_interface(struct usb_interface *interface,
-        rawbulk_intercept_t inceptor);
-void rawbulk_unbind_host_interface(struct usb_interface *interface);
-
-/* operations for transactions */
-int rawbulk_start_transactions(int transfer_id, int nups, int ndowns,
-        int upsz, int downsz, int splitsz, int pushable);
-void rawbulk_stop_transactions(int transfer_id);
-int rawbulk_halt_transactions(int transfer_id);
-int rawbulk_resume_transactions(int transfer_id);
-
-int rawbulk_suspend_host_interface(int transfer_id, pm_message_t message);
-int rawbulk_resume_host_interface(int transfer_id);
-int rawbulk_push_upstream_buffer(int transfer_id, const void *buffer,
-        unsigned int length);
-
-int rawbulk_forward_ctrlrequest(const struct usb_ctrlrequest *ctrl);
-
-/* statics and state */
-int rawbulk_transfer_statistics(int transfer_id, char *buf);
-int rawbulk_transfer_state(int transfer_id);
-
-#endif /* __RAWBULK_HEADER_FILE__ */
diff --git a/ANDROID_3.4.5/include/linux/usb/renesas_usbhs.h b/ANDROID_3.4.5/include/linux/usb/renesas_usbhs.h
deleted file mode 100644
index 547e59cc..00000000
--- a/ANDROID_3.4.5/include/linux/usb/renesas_usbhs.h
+++ /dev/null
@@ -1,196 +0,0 @@
-/*
- * Renesas USB
- *
- * Copyright (C) 2011 Renesas Solutions Corp.
- * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- *
- */
-#ifndef RENESAS_USB_H
-#define RENESAS_USB_H
-#include <linux/platform_device.h>
-#include <linux/usb/ch9.h>
-
-/*
- * module type
- *
- * it will be return value from get_id
- */
-enum {
-	USBHS_HOST = 0,
-	USBHS_GADGET,
-	USBHS_MAX,
-};
-
-/*
- * callback functions table for driver
- *
- * These functions are called from platform for driver.
- * Callback function's pointer will be set before
- * renesas_usbhs_platform_callback :: hardware_init was called
- */
-struct renesas_usbhs_driver_callback {
-	int (*notify_hotplug)(struct platform_device *pdev);
-};
-
-/*
- * callback functions for platform
- *
- * These functions are called from driver for platform
- */
-struct renesas_usbhs_platform_callback {
-
-	/*
-	 * option:
-	 *
-	 * Hardware init function for platform.
-	 * it is called when driver was probed.
-	 */
-	int (*hardware_init)(struct platform_device *pdev);
-
-	/*
-	 * option:
-	 *
-	 * Hardware exit function for platform.
-	 * it is called when driver was removed
-	 */
-	void (*hardware_exit)(struct platform_device *pdev);
-
-	/*
-	 * option:
-	 *
-	 * for board specific clock control
-	 */
-	void (*power_ctrl)(struct platform_device *pdev,
-			   void __iomem *base, int enable);
-
-	/*
-	 * option:
-	 *
-	 * Phy reset for platform
-	 */
-	void (*phy_reset)(struct platform_device *pdev);
-
-	/*
-	 * get USB ID function
-	 *  - USBHS_HOST
-	 *  - USBHS_GADGET
-	 */
-	int (*get_id)(struct platform_device *pdev);
-
-	/*
-	 * get VBUS status function.
-	 */
-	int (*get_vbus)(struct platform_device *pdev);
-
-	/*
-	 * option:
-	 *
-	 * VBUS control is needed for Host
-	 */
-	int (*set_vbus)(struct platform_device *pdev, int enable);
-};
-
-/*
- * parameters for renesas usbhs
- *
- * some register needs USB chip specific parameters.
- * This struct show it to driver
- */
-struct renesas_usbhs_driver_param {
-	/*
-	 * pipe settings
-	 */
-	u32 *pipe_type; /* array of USB_ENDPOINT_XFER_xxx (from ep0) */
-	int pipe_size; /* pipe_type array size */
-
-	/*
-	 * option:
-	 *
-	 * for BUSWAIT :: BWAIT
-	 * see
-	 *	renesas_usbhs/common.c :: usbhsc_set_buswait()
-	 * */
-	int buswait_bwait;
-
-	/*
-	 * option:
-	 *
-	 * delay time from notify_hotplug callback
-	 */
-	int detection_delay; /* msec */
-
-	/*
-	 * option:
-	 *
-	 * dma id for dmaengine
-	 */
-	int d0_tx_id;
-	int d0_rx_id;
-	int d1_tx_id;
-	int d1_rx_id;
-
-	/*
-	 * option:
-	 *
-	 * pio <--> dma border.
-	 */
-	int pio_dma_border; /* default is 64byte */
-
-	/*
-	 * option:
-	 */
-	u32 has_otg:1; /* for controlling PWEN/EXTLP */
-	u32 has_sudmac:1; /* for SUDMAC */
-};
-
-/*
- * option:
- *
- * platform information for renesas_usbhs driver.
- */
-struct renesas_usbhs_platform_info {
-	/*
-	 * option:
-	 *
-	 * platform set these functions before
-	 * call platform_add_devices if needed
-	 */
-	struct renesas_usbhs_platform_callback	platform_callback;
-
-	/*
-	 * driver set these callback functions pointer.
-	 * platform can use it on callback functions
-	 */
-	struct renesas_usbhs_driver_callback	driver_callback;
-
-	/*
-	 * option:
-	 *
-	 * driver use these param for some register
-	 */
-	struct renesas_usbhs_driver_param	driver_param;
-};
-
-/*
- * macro for platform
- */
-#define renesas_usbhs_get_info(pdev)\
-	((struct renesas_usbhs_platform_info *)(pdev)->dev.platform_data)
-
-#define renesas_usbhs_call_notify_hotplug(pdev)				\
-	({								\
-		struct renesas_usbhs_driver_callback *dc;		\
-		dc = &(renesas_usbhs_get_info(pdev)->driver_callback);	\
-		if (dc && dc->notify_hotplug)				\
-			dc->notify_hotplug(pdev);			\
-	})
-#endif /* RENESAS_USB_H */
diff --git a/ANDROID_3.4.5/include/linux/usb/rndis_host.h b/ANDROID_3.4.5/include/linux/usb/rndis_host.h
deleted file mode 100644
index 88fceb71..00000000
--- a/ANDROID_3.4.5/include/linux/usb/rndis_host.h
+++ /dev/null
@@ -1,272 +0,0 @@
-/*
- * Host Side support for RNDIS Networking Links
- * Copyright (C) 2005 by David Brownell
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef	__LINUX_USB_RNDIS_HOST_H
-#define	__LINUX_USB_RNDIS_HOST_H
-
-/*
- * CONTROL uses CDC "encapsulated commands" with funky notifications.
- *  - control-out:  SEND_ENCAPSULATED
- *  - interrupt-in:  RESPONSE_AVAILABLE
- *  - control-in:  GET_ENCAPSULATED
- *
- * We'll try to ignore the RESPONSE_AVAILABLE notifications.
- *
- * REVISIT some RNDIS implementations seem to have curious issues still
- * to be resolved.
- */
-struct rndis_msg_hdr {
-	__le32	msg_type;			/* RNDIS_MSG_* */
-	__le32	msg_len;
-	/* followed by data that varies between messages */
-	__le32	request_id;
-	__le32	status;
-	/* ... and more */
-} __attribute__ ((packed));
-
-/* MS-Windows uses this strange size, but RNDIS spec says 1024 minimum */
-#define	CONTROL_BUFFER_SIZE		1025
-
-/* RNDIS defines an (absurdly huge) 10 second control timeout,
- * but ActiveSync seems to use a more usual 5 second timeout
- * (which matches the USB 2.0 spec).
- */
-#define	RNDIS_CONTROL_TIMEOUT_MS	(5 * 1000)
-
-#define RNDIS_MSG_COMPLETION	cpu_to_le32(0x80000000)
-
-/* codes for "msg_type" field of rndis messages;
- * only the data channel uses packet messages (maybe batched);
- * everything else goes on the control channel.
- */
-#define RNDIS_MSG_PACKET	cpu_to_le32(0x00000001)	/* 1-N packets */
-#define RNDIS_MSG_INIT		cpu_to_le32(0x00000002)
-#define RNDIS_MSG_INIT_C	(RNDIS_MSG_INIT|RNDIS_MSG_COMPLETION)
-#define RNDIS_MSG_HALT		cpu_to_le32(0x00000003)
-#define RNDIS_MSG_QUERY		cpu_to_le32(0x00000004)
-#define RNDIS_MSG_QUERY_C	(RNDIS_MSG_QUERY|RNDIS_MSG_COMPLETION)
-#define RNDIS_MSG_SET		cpu_to_le32(0x00000005)
-#define RNDIS_MSG_SET_C		(RNDIS_MSG_SET|RNDIS_MSG_COMPLETION)
-#define RNDIS_MSG_RESET		cpu_to_le32(0x00000006)
-#define RNDIS_MSG_RESET_C	(RNDIS_MSG_RESET|RNDIS_MSG_COMPLETION)
-#define RNDIS_MSG_INDICATE	cpu_to_le32(0x00000007)
-#define RNDIS_MSG_KEEPALIVE	cpu_to_le32(0x00000008)
-#define RNDIS_MSG_KEEPALIVE_C	(RNDIS_MSG_KEEPALIVE|RNDIS_MSG_COMPLETION)
-
-/* codes for "status" field of completion messages */
-#define	RNDIS_STATUS_SUCCESS			cpu_to_le32(0x00000000)
-#define	RNDIS_STATUS_FAILURE			cpu_to_le32(0xc0000001)
-#define	RNDIS_STATUS_INVALID_DATA		cpu_to_le32(0xc0010015)
-#define	RNDIS_STATUS_NOT_SUPPORTED		cpu_to_le32(0xc00000bb)
-#define	RNDIS_STATUS_MEDIA_CONNECT		cpu_to_le32(0x4001000b)
-#define	RNDIS_STATUS_MEDIA_DISCONNECT		cpu_to_le32(0x4001000c)
-#define	RNDIS_STATUS_MEDIA_SPECIFIC_INDICATION	cpu_to_le32(0x40010012)
-
-/* codes for OID_GEN_PHYSICAL_MEDIUM */
-#define	RNDIS_PHYSICAL_MEDIUM_UNSPECIFIED	cpu_to_le32(0x00000000)
-#define	RNDIS_PHYSICAL_MEDIUM_WIRELESS_LAN	cpu_to_le32(0x00000001)
-#define	RNDIS_PHYSICAL_MEDIUM_CABLE_MODEM	cpu_to_le32(0x00000002)
-#define	RNDIS_PHYSICAL_MEDIUM_PHONE_LINE	cpu_to_le32(0x00000003)
-#define	RNDIS_PHYSICAL_MEDIUM_POWER_LINE	cpu_to_le32(0x00000004)
-#define	RNDIS_PHYSICAL_MEDIUM_DSL		cpu_to_le32(0x00000005)
-#define	RNDIS_PHYSICAL_MEDIUM_FIBRE_CHANNEL	cpu_to_le32(0x00000006)
-#define	RNDIS_PHYSICAL_MEDIUM_1394		cpu_to_le32(0x00000007)
-#define	RNDIS_PHYSICAL_MEDIUM_WIRELESS_WAN	cpu_to_le32(0x00000008)
-#define	RNDIS_PHYSICAL_MEDIUM_MAX		cpu_to_le32(0x00000009)
-
-struct rndis_data_hdr {
-	__le32	msg_type;		/* RNDIS_MSG_PACKET */
-	__le32	msg_len;		/* rndis_data_hdr + data_len + pad */
-	__le32	data_offset;		/* 36 -- right after header */
-	__le32	data_len;		/* ... real packet size */
-
-	__le32	oob_data_offset;	/* zero */
-	__le32	oob_data_len;		/* zero */
-	__le32	num_oob;		/* zero */
-	__le32	packet_data_offset;	/* zero */
-
-	__le32	packet_data_len;	/* zero */
-	__le32	vc_handle;		/* zero */
-	__le32	reserved;		/* zero */
-} __attribute__ ((packed));
-
-struct rndis_init {		/* OUT */
-	/* header and: */
-	__le32	msg_type;			/* RNDIS_MSG_INIT */
-	__le32	msg_len;			/* 24 */
-	__le32	request_id;
-	__le32	major_version;			/* of rndis (1.0) */
-	__le32	minor_version;
-	__le32	max_transfer_size;
-} __attribute__ ((packed));
-
-struct rndis_init_c {		/* IN */
-	/* header and: */
-	__le32	msg_type;			/* RNDIS_MSG_INIT_C */
-	__le32	msg_len;
-	__le32	request_id;
-	__le32	status;
-	__le32	major_version;			/* of rndis (1.0) */
-	__le32	minor_version;
-	__le32	device_flags;
-	__le32	medium;				/* zero == 802.3 */
-	__le32	max_packets_per_message;
-	__le32	max_transfer_size;
-	__le32	packet_alignment;		/* max 7; (1<<n) bytes */
-	__le32	af_list_offset;			/* zero */
-	__le32	af_list_size;			/* zero */
-} __attribute__ ((packed));
-
-struct rndis_halt {		/* OUT (no reply) */
-	/* header and: */
-	__le32	msg_type;			/* RNDIS_MSG_HALT */
-	__le32	msg_len;
-	__le32	request_id;
-} __attribute__ ((packed));
-
-struct rndis_query {		/* OUT */
-	/* header and: */
-	__le32	msg_type;			/* RNDIS_MSG_QUERY */
-	__le32	msg_len;
-	__le32	request_id;
-	__le32	oid;
-	__le32	len;
-	__le32	offset;
-/*?*/	__le32	handle;				/* zero */
-} __attribute__ ((packed));
-
-struct rndis_query_c {		/* IN */
-	/* header and: */
-	__le32	msg_type;			/* RNDIS_MSG_QUERY_C */
-	__le32	msg_len;
-	__le32	request_id;
-	__le32	status;
-	__le32	len;
-	__le32	offset;
-} __attribute__ ((packed));
-
-struct rndis_set {		/* OUT */
-	/* header and: */
-	__le32	msg_type;			/* RNDIS_MSG_SET */
-	__le32	msg_len;
-	__le32	request_id;
-	__le32	oid;
-	__le32	len;
-	__le32	offset;
-/*?*/	__le32	handle;				/* zero */
-} __attribute__ ((packed));
-
-struct rndis_set_c {		/* IN */
-	/* header and: */
-	__le32	msg_type;			/* RNDIS_MSG_SET_C */
-	__le32	msg_len;
-	__le32	request_id;
-	__le32	status;
-} __attribute__ ((packed));
-
-struct rndis_reset {		/* IN */
-	/* header and: */
-	__le32	msg_type;			/* RNDIS_MSG_RESET */
-	__le32	msg_len;
-	__le32	reserved;
-} __attribute__ ((packed));
-
-struct rndis_reset_c {		/* OUT */
-	/* header and: */
-	__le32	msg_type;			/* RNDIS_MSG_RESET_C */
-	__le32	msg_len;
-	__le32	status;
-	__le32	addressing_lost;
-} __attribute__ ((packed));
-
-struct rndis_indicate {		/* IN (unrequested) */
-	/* header and: */
-	__le32	msg_type;			/* RNDIS_MSG_INDICATE */
-	__le32	msg_len;
-	__le32	status;
-	__le32	length;
-	__le32	offset;
-/**/	__le32	diag_status;
-	__le32	error_offset;
-/**/	__le32	message;
-} __attribute__ ((packed));
-
-struct rndis_keepalive {	/* OUT (optionally IN) */
-	/* header and: */
-	__le32	msg_type;			/* RNDIS_MSG_KEEPALIVE */
-	__le32	msg_len;
-	__le32	request_id;
-} __attribute__ ((packed));
-
-struct rndis_keepalive_c {	/* IN (optionally OUT) */
-	/* header and: */
-	__le32	msg_type;			/* RNDIS_MSG_KEEPALIVE_C */
-	__le32	msg_len;
-	__le32	request_id;
-	__le32	status;
-} __attribute__ ((packed));
-
-/* NOTE:  about 30 OIDs are "mandatory" for peripherals to support ... and
- * there are gobs more that may optionally be supported.  We'll avoid as much
- * of that mess as possible.
- */
-#define OID_802_3_PERMANENT_ADDRESS	cpu_to_le32(0x01010101)
-#define OID_GEN_MAXIMUM_FRAME_SIZE	cpu_to_le32(0x00010106)
-#define OID_GEN_CURRENT_PACKET_FILTER	cpu_to_le32(0x0001010e)
-#define OID_GEN_PHYSICAL_MEDIUM		cpu_to_le32(0x00010202)
-
-/* packet filter bits used by OID_GEN_CURRENT_PACKET_FILTER */
-#define RNDIS_PACKET_TYPE_DIRECTED		cpu_to_le32(0x00000001)
-#define RNDIS_PACKET_TYPE_MULTICAST		cpu_to_le32(0x00000002)
-#define RNDIS_PACKET_TYPE_ALL_MULTICAST		cpu_to_le32(0x00000004)
-#define RNDIS_PACKET_TYPE_BROADCAST		cpu_to_le32(0x00000008)
-#define RNDIS_PACKET_TYPE_SOURCE_ROUTING	cpu_to_le32(0x00000010)
-#define RNDIS_PACKET_TYPE_PROMISCUOUS		cpu_to_le32(0x00000020)
-#define RNDIS_PACKET_TYPE_SMT			cpu_to_le32(0x00000040)
-#define RNDIS_PACKET_TYPE_ALL_LOCAL		cpu_to_le32(0x00000080)
-#define RNDIS_PACKET_TYPE_GROUP			cpu_to_le32(0x00001000)
-#define RNDIS_PACKET_TYPE_ALL_FUNCTIONAL	cpu_to_le32(0x00002000)
-#define RNDIS_PACKET_TYPE_FUNCTIONAL		cpu_to_le32(0x00004000)
-#define RNDIS_PACKET_TYPE_MAC_FRAME		cpu_to_le32(0x00008000)
-
-/* default filter used with RNDIS devices */
-#define RNDIS_DEFAULT_FILTER ( \
-	RNDIS_PACKET_TYPE_DIRECTED | \
-	RNDIS_PACKET_TYPE_BROADCAST | \
-	RNDIS_PACKET_TYPE_ALL_MULTICAST | \
-	RNDIS_PACKET_TYPE_PROMISCUOUS)
-
-/* Flags to require specific physical medium type for generic_rndis_bind() */
-#define FLAG_RNDIS_PHYM_NOT_WIRELESS	0x0001
-#define FLAG_RNDIS_PHYM_WIRELESS	0x0002
-
-/* Flags for driver_info::data */
-#define RNDIS_DRIVER_DATA_POLL_STATUS	1	/* poll status before control */
-
-extern void rndis_status(struct usbnet *dev, struct urb *urb);
-extern int
-rndis_command(struct usbnet *dev, struct rndis_msg_hdr *buf, int buflen);
-extern int
-generic_rndis_bind(struct usbnet *dev, struct usb_interface *intf, int flags);
-extern void rndis_unbind(struct usbnet *dev, struct usb_interface *intf);
-extern int rndis_rx_fixup(struct usbnet *dev, struct sk_buff *skb);
-extern struct sk_buff *
-rndis_tx_fixup(struct usbnet *dev, struct sk_buff *skb, gfp_t flags);
-
-#endif	/* __LINUX_USB_RNDIS_HOST_H */
diff --git a/ANDROID_3.4.5/include/linux/usb/serial.h b/ANDROID_3.4.5/include/linux/usb/serial.h
deleted file mode 100644
index 47428388..00000000
--- a/ANDROID_3.4.5/include/linux/usb/serial.h
+++ /dev/null
@@ -1,417 +0,0 @@
-/*
- * USB Serial Converter stuff
- *
- *	Copyright (C) 1999 - 2005
- *	    Greg Kroah-Hartman (greg@kroah.com)
- *
- *	This program is free software; you can redistribute it and/or modify
- *	it under the terms of the GNU General Public License as published by
- *	the Free Software Foundation; version 2 of the License.
- *
- */
-
-#ifndef __LINUX_USB_SERIAL_H
-#define __LINUX_USB_SERIAL_H
-
-#include <linux/kref.h>
-#include <linux/mutex.h>
-#include <linux/sysrq.h>
-#include <linux/kfifo.h>
-
-#define SERIAL_TTY_MAJOR	188	/* Nice legal number now */
-#define SERIAL_TTY_MINORS	254	/* loads of devices :) */
-#define SERIAL_TTY_NO_MINOR	255	/* No minor was assigned */
-
-/* The maximum number of ports one device can grab at once */
-#define MAX_NUM_PORTS		8
-
-/* parity check flag */
-#define RELEVANT_IFLAG(iflag)	(iflag & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK))
-
-/* USB serial flags */
-#define USB_SERIAL_WRITE_BUSY	0
-
-/**
- * usb_serial_port: structure for the specific ports of a device.
- * @serial: pointer back to the struct usb_serial owner of this port.
- * @port: pointer to the corresponding tty_port for this port.
- * @lock: spinlock to grab when updating portions of this structure.
- * @number: the number of the port (the minor number).
- * @interrupt_in_buffer: pointer to the interrupt in buffer for this port.
- * @interrupt_in_urb: pointer to the interrupt in struct urb for this port.
- * @interrupt_in_endpointAddress: endpoint address for the interrupt in pipe
- *	for this port.
- * @interrupt_out_buffer: pointer to the interrupt out buffer for this port.
- * @interrupt_out_size: the size of the interrupt_out_buffer, in bytes.
- * @interrupt_out_urb: pointer to the interrupt out struct urb for this port.
- * @interrupt_out_endpointAddress: endpoint address for the interrupt out pipe
- *	for this port.
- * @bulk_in_buffer: pointer to the bulk in buffer for this port.
- * @bulk_in_size: the size of the bulk_in_buffer, in bytes.
- * @read_urb: pointer to the bulk in struct urb for this port.
- * @bulk_in_endpointAddress: endpoint address for the bulk in pipe for this
- *	port.
- * @bulk_in_buffers: pointers to the bulk in buffers for this port
- * @read_urbs: pointers to the bulk in urbs for this port
- * @read_urbs_free: status bitmap the for bulk in urbs
- * @bulk_out_buffer: pointer to the bulk out buffer for this port.
- * @bulk_out_size: the size of the bulk_out_buffer, in bytes.
- * @write_urb: pointer to the bulk out struct urb for this port.
- * @write_fifo: kfifo used to buffer outgoing data
- * @bulk_out_buffers: pointers to the bulk out buffers for this port
- * @write_urbs: pointers to the bulk out urbs for this port
- * @write_urbs_free: status bitmap the for bulk out urbs
- * @tx_bytes: number of bytes currently in host stack queues
- * @bulk_out_endpointAddress: endpoint address for the bulk out pipe for this
- *	port.
- * @flags: usb serial port flags
- * @write_wait: a wait_queue_head_t used by the port.
- * @work: work queue entry for the line discipline waking up.
- * @throttled: nonzero if the read urb is inactive to throttle the device
- * @throttle_req: nonzero if the tty wants to throttle us
- * @dev: pointer to the serial device
- *
- * This structure is used by the usb-serial core and drivers for the specific
- * ports of a device.
- */
-struct usb_serial_port {
-	struct usb_serial	*serial;
-	struct tty_port		port;
-	spinlock_t		lock;
-	unsigned char		number;
-
-	unsigned char		*interrupt_in_buffer;
-	struct urb		*interrupt_in_urb;
-	__u8			interrupt_in_endpointAddress;
-
-	unsigned char		*interrupt_out_buffer;
-	int			interrupt_out_size;
-	struct urb		*interrupt_out_urb;
-	__u8			interrupt_out_endpointAddress;
-
-	unsigned char		*bulk_in_buffer;
-	int			bulk_in_size;
-	struct urb		*read_urb;
-	__u8			bulk_in_endpointAddress;
-
-	unsigned char		*bulk_in_buffers[2];
-	struct urb		*read_urbs[2];
-	unsigned long		read_urbs_free;
-
-	unsigned char		*bulk_out_buffer;
-	int			bulk_out_size;
-	struct urb		*write_urb;
-	struct kfifo		write_fifo;
-
-	unsigned char		*bulk_out_buffers[2];
-	struct urb		*write_urbs[2];
-	unsigned long		write_urbs_free;
-	__u8			bulk_out_endpointAddress;
-
-	int			tx_bytes;
-
-	unsigned long		flags;
-	wait_queue_head_t	write_wait;
-	struct work_struct	work;
-	char			throttled;
-	char			throttle_req;
-	unsigned long		sysrq; /* sysrq timeout */
-	struct device		dev;
-};
-#define to_usb_serial_port(d) container_of(d, struct usb_serial_port, dev)
-
-/* get and set the port private data pointer helper functions */
-static inline void *usb_get_serial_port_data(struct usb_serial_port *port)
-{
-	return dev_get_drvdata(&port->dev);
-}
-
-static inline void usb_set_serial_port_data(struct usb_serial_port *port,
-					    void *data)
-{
-	dev_set_drvdata(&port->dev, data);
-}
-
-/**
- * usb_serial - structure used by the usb-serial core for a device
- * @dev: pointer to the struct usb_device for this device
- * @type: pointer to the struct usb_serial_driver for this device
- * @interface: pointer to the struct usb_interface for this device
- * @minor: the starting minor number for this device
- * @num_ports: the number of ports this device has
- * @num_interrupt_in: number of interrupt in endpoints we have
- * @num_interrupt_out: number of interrupt out endpoints we have
- * @num_bulk_in: number of bulk in endpoints we have
- * @num_bulk_out: number of bulk out endpoints we have
- * @port: array of struct usb_serial_port structures for the different ports.
- * @private: place to put any driver specific information that is needed.  The
- *	usb-serial driver is required to manage this data, the usb-serial core
- *	will not touch this.  Use usb_get_serial_data() and
- *	usb_set_serial_data() to access this.
- */
-struct usb_serial {
-	struct usb_device		*dev;
-	struct usb_serial_driver	*type;
-	struct usb_interface		*interface;
-	unsigned char			disconnected:1;
-	unsigned char			suspending:1;
-	unsigned char			attached:1;
-	unsigned char			minor;
-	unsigned char			num_ports;
-	unsigned char			num_port_pointers;
-	char				num_interrupt_in;
-	char				num_interrupt_out;
-	char				num_bulk_in;
-	char				num_bulk_out;
-	struct usb_serial_port		*port[MAX_NUM_PORTS];
-	struct kref			kref;
-	struct mutex			disc_mutex;
-	void				*private;
-};
-#define to_usb_serial(d) container_of(d, struct usb_serial, kref)
-
-/* get and set the serial private data pointer helper functions */
-static inline void *usb_get_serial_data(struct usb_serial *serial)
-{
-	return serial->private;
-}
-
-static inline void usb_set_serial_data(struct usb_serial *serial, void *data)
-{
-	serial->private = data;
-}
-
-/**
- * usb_serial_driver - describes a usb serial driver
- * @description: pointer to a string that describes this driver.  This string
- *	used in the syslog messages when a device is inserted or removed.
- * @id_table: pointer to a list of usb_device_id structures that define all
- *	of the devices this structure can support.
- * @num_ports: the number of different ports this device will have.
- * @bulk_in_size: minimum number of bytes to allocate for bulk-in buffer
- *	(0 = end-point size)
- * @bulk_out_size: bytes to allocate for bulk-out buffer (0 = end-point size)
- * @calc_num_ports: pointer to a function to determine how many ports this
- *	device has dynamically.  It will be called after the probe()
- *	callback is called, but before attach()
- * @probe: pointer to the driver's probe function.
- *	This will be called when the device is inserted into the system,
- *	but before the device has been fully initialized by the usb_serial
- *	subsystem.  Use this function to download any firmware to the device,
- *	or any other early initialization that might be needed.
- *	Return 0 to continue on with the initialization sequence.  Anything
- *	else will abort it.
- * @attach: pointer to the driver's attach function.
- *	This will be called when the struct usb_serial structure is fully set
- *	set up.  Do any local initialization of the device, or any private
- *	memory structure allocation at this point in time.
- * @disconnect: pointer to the driver's disconnect function.  This will be
- *	called when the device is unplugged or unbound from the driver.
- * @release: pointer to the driver's release function.  This will be called
- *	when the usb_serial data structure is about to be destroyed.
- * @usb_driver: pointer to the struct usb_driver that controls this
- *	device.  This is necessary to allow dynamic ids to be added to
- *	the driver from sysfs.
- *
- * This structure is defines a USB Serial driver.  It provides all of
- * the information that the USB serial core code needs.  If the function
- * pointers are defined, then the USB serial core code will call them when
- * the corresponding tty port functions are called.  If they are not
- * called, the generic serial function will be used instead.
- *
- * The driver.owner field should be set to the module owner of this driver.
- * The driver.name field should be set to the name of this driver (remember
- * it will show up in sysfs, so it needs to be short and to the point.
- * Using the module name is a good idea.)
- */
-struct usb_serial_driver {
-	const char *description;
-	const struct usb_device_id *id_table;
-	char	num_ports;
-
-	struct list_head	driver_list;
-	struct device_driver	driver;
-	struct usb_driver	*usb_driver;
-	struct usb_dynids	dynids;
-
-	size_t			bulk_in_size;
-	size_t			bulk_out_size;
-
-	int (*probe)(struct usb_serial *serial, const struct usb_device_id *id);
-	int (*attach)(struct usb_serial *serial);
-	int (*calc_num_ports) (struct usb_serial *serial);
-
-	void (*disconnect)(struct usb_serial *serial);
-	void (*release)(struct usb_serial *serial);
-
-	int (*port_probe)(struct usb_serial_port *port);
-	int (*port_remove)(struct usb_serial_port *port);
-
-	int (*suspend)(struct usb_serial *serial, pm_message_t message);
-	int (*resume)(struct usb_serial *serial);
-
-	/* serial function calls */
-	/* Called by console and by the tty layer */
-	int  (*open)(struct tty_struct *tty, struct usb_serial_port *port);
-	void (*close)(struct usb_serial_port *port);
-	int  (*write)(struct tty_struct *tty, struct usb_serial_port *port,
-			const unsigned char *buf, int count);
-	/* Called only by the tty layer */
-	int  (*write_room)(struct tty_struct *tty);
-	int  (*ioctl)(struct tty_struct *tty,
-		      unsigned int cmd, unsigned long arg);
-	void (*set_termios)(struct tty_struct *tty,
-			struct usb_serial_port *port, struct ktermios *old);
-	void (*break_ctl)(struct tty_struct *tty, int break_state);
-	int  (*chars_in_buffer)(struct tty_struct *tty);
-	void (*throttle)(struct tty_struct *tty);
-	void (*unthrottle)(struct tty_struct *tty);
-	int  (*tiocmget)(struct tty_struct *tty);
-	int  (*tiocmset)(struct tty_struct *tty,
-			 unsigned int set, unsigned int clear);
-	int  (*get_icount)(struct tty_struct *tty,
-			struct serial_icounter_struct *icount);
-	/* Called by the tty layer for port level work. There may or may not
-	   be an attached tty at this point */
-	void (*dtr_rts)(struct usb_serial_port *port, int on);
-	int  (*carrier_raised)(struct usb_serial_port *port);
-	/* Called by the usb serial hooks to allow the user to rework the
-	   termios state */
-	void (*init_termios)(struct tty_struct *tty);
-	/* USB events */
-	void (*read_int_callback)(struct urb *urb);
-	void (*write_int_callback)(struct urb *urb);
-	void (*read_bulk_callback)(struct urb *urb);
-	void (*write_bulk_callback)(struct urb *urb);
-	/* Called by the generic read bulk callback */
-	void (*process_read_urb)(struct urb *urb);
-	/* Called by the generic write implementation */
-	int (*prepare_write_buffer)(struct usb_serial_port *port,
-						void *dest, size_t size);
-};
-#define to_usb_serial_driver(d) \
-	container_of(d, struct usb_serial_driver, driver)
-
-extern int usb_serial_register_drivers(struct usb_driver *udriver,
-		struct usb_serial_driver * const serial_drivers[]);
-extern void usb_serial_deregister_drivers(struct usb_driver *udriver,
-		struct usb_serial_driver * const serial_drivers[]);
-extern void usb_serial_port_softint(struct usb_serial_port *port);
-
-extern int usb_serial_probe(struct usb_interface *iface,
-			    const struct usb_device_id *id);
-extern void usb_serial_disconnect(struct usb_interface *iface);
-
-extern int usb_serial_suspend(struct usb_interface *intf, pm_message_t message);
-extern int usb_serial_resume(struct usb_interface *intf);
-
-extern int ezusb_writememory(struct usb_serial *serial, int address,
-			     unsigned char *data, int length, __u8 bRequest);
-extern int ezusb_set_reset(struct usb_serial *serial, unsigned char reset_bit);
-
-/* USB Serial console functions */
-#ifdef CONFIG_USB_SERIAL_CONSOLE
-extern void usb_serial_console_init(int debug, int minor);
-extern void usb_serial_console_exit(void);
-extern void usb_serial_console_disconnect(struct usb_serial *serial);
-#else
-static inline void usb_serial_console_init(int debug, int minor) { }
-static inline void usb_serial_console_exit(void) { }
-static inline void usb_serial_console_disconnect(struct usb_serial *serial) {}
-#endif
-
-/* Functions needed by other parts of the usbserial core */
-extern struct usb_serial *usb_serial_get_by_index(unsigned int minor);
-extern void usb_serial_put(struct usb_serial *serial);
-extern int usb_serial_generic_open(struct tty_struct *tty,
-	struct usb_serial_port *port);
-extern int usb_serial_generic_write(struct tty_struct *tty,
-	struct usb_serial_port *port, const unsigned char *buf, int count);
-extern void usb_serial_generic_close(struct usb_serial_port *port);
-extern int usb_serial_generic_resume(struct usb_serial *serial);
-extern int usb_serial_generic_write_room(struct tty_struct *tty);
-extern int usb_serial_generic_chars_in_buffer(struct tty_struct *tty);
-extern void usb_serial_generic_read_bulk_callback(struct urb *urb);
-extern void usb_serial_generic_write_bulk_callback(struct urb *urb);
-extern void usb_serial_generic_throttle(struct tty_struct *tty);
-extern void usb_serial_generic_unthrottle(struct tty_struct *tty);
-extern void usb_serial_generic_disconnect(struct usb_serial *serial);
-extern void usb_serial_generic_release(struct usb_serial *serial);
-extern int usb_serial_generic_register(int debug);
-extern void usb_serial_generic_deregister(void);
-extern int usb_serial_generic_submit_read_urbs(struct usb_serial_port *port,
-						 gfp_t mem_flags);
-extern void usb_serial_generic_process_read_urb(struct urb *urb);
-extern int usb_serial_generic_prepare_write_buffer(struct usb_serial_port *port,
-						void *dest, size_t size);
-extern int usb_serial_handle_sysrq_char(struct usb_serial_port *port,
-					unsigned int ch);
-extern int usb_serial_handle_break(struct usb_serial_port *port);
-extern void usb_serial_handle_dcd_change(struct usb_serial_port *usb_port,
-					 struct tty_struct *tty,
-					 unsigned int status);
-
-
-extern int usb_serial_bus_register(struct usb_serial_driver *device);
-extern void usb_serial_bus_deregister(struct usb_serial_driver *device);
-
-extern struct usb_serial_driver usb_serial_generic_device;
-extern struct bus_type usb_serial_bus_type;
-extern struct tty_driver *usb_serial_tty_driver;
-
-static inline void usb_serial_debug_data(int debug,
-					 struct device *dev,
-					 const char *function, int size,
-					 const unsigned char *data)
-{
-	int i;
-
-	if (debug) {
-		dev_printk(KERN_DEBUG, dev, "%s - length = %d, data = ",
-			   function, size);
-		for (i = 0; i < size; ++i)
-			printk("%.2x ", data[i]);
-		printk("\n");
-	}
-}
-
-/* Use our own dbg macro */
-#undef dbg
-#define dbg(format, arg...)						\
-do {									\
-	if (debug)							\
-		printk(KERN_DEBUG "%s: " format "\n", __FILE__, ##arg);	\
-} while (0)
-
-/*
- * Macro for reporting errors in write path to avoid inifinite loop
- * when port is used as a console.
- */
-#define dev_err_console(usport, fmt, ...)				\
-do {									\
-	static bool __print_once;					\
-	struct usb_serial_port *__port = (usport);			\
-									\
-	if (!__port->port.console || !__print_once) {			\
-		__print_once = true;					\
-		dev_err(&__port->dev, fmt, ##__VA_ARGS__);		\
-	}								\
-} while (0)
-
-/*
- * module_usb_serial_driver() - Helper macro for registering a USB Serial driver
- * @__usb_driver: usb_driver struct to register
- * @__serial_drivers: list of usb_serial drivers to register
- *
- * Helper macro for USB serial drivers which do not do anything special
- * in module init/exit. This eliminates a lot of boilerplate. Each
- * module may only use this macro once, and calling it replaces
- * module_init() and module_exit()
- *
- */
-#define module_usb_serial_driver(__usb_driver, __serial_drivers)	\
-	module_driver(__usb_driver, usb_serial_register_drivers,	\
-		       usb_serial_deregister_drivers, __serial_drivers)
-
-#endif /* __LINUX_USB_SERIAL_H */
-
diff --git a/ANDROID_3.4.5/include/linux/usb/sl811.h b/ANDROID_3.4.5/include/linux/usb/sl811.h
deleted file mode 100644
index 3afe4d16..00000000
--- a/ANDROID_3.4.5/include/linux/usb/sl811.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * board initialization should put one of these into dev->platform_data
- * and place the sl811hs onto platform_bus named "sl811-hcd".
- */
-
-#ifndef __LINUX_USB_SL811_H
-#define __LINUX_USB_SL811_H
-
-struct sl811_platform_data {
-	unsigned	can_wakeup:1;
-
-	/* given port_power, msec/2 after power on till power good */
-	u8		potpg;
-
-	/* mA/2 power supplied on this port (max = default = 250) */
-	u8		power;
-
-	/* sl811 relies on an external source of VBUS current */
-	void		(*port_power)(struct device *dev, int is_on);
-
-	/* pulse sl811 nRST (probably with a GPIO) */
-	void		(*reset)(struct device *dev);
-
-	/* some boards need something like these: */
-	/* int		(*check_overcurrent)(struct device *dev); */
-	/* void		(*clock_enable)(struct device *dev, int is_on); */
-};
-
-#endif /* __LINUX_USB_SL811_H */
diff --git a/ANDROID_3.4.5/include/linux/usb/storage.h b/ANDROID_3.4.5/include/linux/usb/storage.h
deleted file mode 100644
index cb33fff2..00000000
--- a/ANDROID_3.4.5/include/linux/usb/storage.h
+++ /dev/null
@@ -1,86 +0,0 @@
-#ifndef __LINUX_USB_STORAGE_H
-#define __LINUX_USB_STORAGE_H
-
-/*
- * linux/usb/storage.h
- *
- * Copyright Matthew Wilcox for Intel Corp, 2010
- *
- * This file contains definitions taken from the
- * USB Mass Storage Class Specification Overview
- *
- * Distributed under the terms of the GNU GPL, version two.
- */
-
-/* Storage subclass codes */
-
-#define USB_SC_RBC	0x01		/* Typically, flash devices */
-#define USB_SC_8020	0x02		/* CD-ROM */
-#define USB_SC_QIC	0x03		/* QIC-157 Tapes */
-#define USB_SC_UFI	0x04		/* Floppy */
-#define USB_SC_8070	0x05		/* Removable media */
-#define USB_SC_SCSI	0x06		/* Transparent */
-#define USB_SC_LOCKABLE	0x07		/* Password-protected */
-
-#define USB_SC_ISD200	0xf0		/* ISD200 ATA */
-#define USB_SC_CYP_ATACB	0xf1	/* Cypress ATACB */
-#define USB_SC_DEVICE	0xff		/* Use device's value */
-
-/* Storage protocol codes */
-
-#define USB_PR_CBI	0x00		/* Control/Bulk/Interrupt */
-#define USB_PR_CB	0x01		/* Control/Bulk w/o interrupt */
-#define USB_PR_BULK	0x50		/* bulk only */
-#define USB_PR_UAS	0x62		/* USB Attached SCSI */
-
-#define USB_PR_USBAT	0x80		/* SCM-ATAPI bridge */
-#define USB_PR_EUSB_SDDR09	0x81	/* SCM-SCSI bridge for SDDR-09 */
-#define USB_PR_SDDR55	0x82		/* SDDR-55 (made up) */
-#define USB_PR_DPCM_USB	0xf0		/* Combination CB/SDDR09 */
-#define USB_PR_FREECOM	0xf1		/* Freecom */
-#define USB_PR_DATAFAB	0xf2		/* Datafab chipsets */
-#define USB_PR_JUMPSHOT	0xf3		/* Lexar Jumpshot */
-#define USB_PR_ALAUDA	0xf4		/* Alauda chipsets */
-#define USB_PR_KARMA	0xf5		/* Rio Karma */
-
-#define USB_PR_DEVICE	0xff		/* Use device's value */
-
- /*
-  * Bulk only data structures
-  */
-
-/* command block wrapper */
-struct bulk_cb_wrap {
-	__le32	Signature;		/* contains 'USBC' */
-	__u32	Tag;			/* unique per command id */
-	__le32	DataTransferLength;	/* size of data */
-	__u8	Flags;			/* direction in bit 0 */
-	__u8	Lun;			/* LUN normally 0 */
-	__u8	Length;			/* of of the CDB */
-	__u8	CDB[16];		/* max command */
-};
-
-#define US_BULK_CB_WRAP_LEN	31
-#define US_BULK_CB_SIGN		0x43425355	/*spells out USBC */
-#define US_BULK_FLAG_IN		(1 << 7)
-#define US_BULK_FLAG_OUT	0
-
-/* command status wrapper */
-struct bulk_cs_wrap {
-	__le32	Signature;	/* should = 'USBS' */
-	__u32	Tag;		/* same as original command */
-	__le32	Residue;	/* amount not transferred */
-	__u8	Status;		/* see below */
-};
-
-#define US_BULK_CS_WRAP_LEN	13
-#define US_BULK_CS_SIGN		0x53425355      /* spells out 'USBS' */
-#define US_BULK_STAT_OK		0
-#define US_BULK_STAT_FAIL	1
-#define US_BULK_STAT_PHASE	2
-
-/* bulk-only class specific requests */
-#define US_BULK_RESET_REQUEST   0xff
-#define US_BULK_GET_MAX_LUN     0xfe
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/usb/tmc.h b/ANDROID_3.4.5/include/linux/usb/tmc.h
deleted file mode 100644
index c045ae12..00000000
--- a/ANDROID_3.4.5/include/linux/usb/tmc.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * Copyright (C) 2007 Stefan Kopp, Gechingen, Germany
- * Copyright (C) 2008 Novell, Inc.
- * Copyright (C) 2008 Greg Kroah-Hartman <gregkh@suse.de>
- *
- * This file holds USB constants defined by the USB Device Class
- * Definition for Test and Measurement devices published by the USB-IF.
- *
- * It also has the ioctl definitions for the usbtmc kernel driver that
- * userspace needs to know about.
- */
-
-#ifndef __LINUX_USB_TMC_H
-#define __LINUX_USB_TMC_H
-
-/* USB TMC status values */
-#define USBTMC_STATUS_SUCCESS				0x01
-#define USBTMC_STATUS_PENDING				0x02
-#define USBTMC_STATUS_FAILED				0x80
-#define USBTMC_STATUS_TRANSFER_NOT_IN_PROGRESS		0x81
-#define USBTMC_STATUS_SPLIT_NOT_IN_PROGRESS		0x82
-#define USBTMC_STATUS_SPLIT_IN_PROGRESS			0x83
-
-/* USB TMC requests values */
-#define USBTMC_REQUEST_INITIATE_ABORT_BULK_OUT		1
-#define USBTMC_REQUEST_CHECK_ABORT_BULK_OUT_STATUS	2
-#define USBTMC_REQUEST_INITIATE_ABORT_BULK_IN		3
-#define USBTMC_REQUEST_CHECK_ABORT_BULK_IN_STATUS	4
-#define USBTMC_REQUEST_INITIATE_CLEAR			5
-#define USBTMC_REQUEST_CHECK_CLEAR_STATUS		6
-#define USBTMC_REQUEST_GET_CAPABILITIES			7
-#define USBTMC_REQUEST_INDICATOR_PULSE			64
-
-/* Request values for USBTMC driver's ioctl entry point */
-#define USBTMC_IOC_NR			91
-#define USBTMC_IOCTL_INDICATOR_PULSE	_IO(USBTMC_IOC_NR, 1)
-#define USBTMC_IOCTL_CLEAR		_IO(USBTMC_IOC_NR, 2)
-#define USBTMC_IOCTL_ABORT_BULK_OUT	_IO(USBTMC_IOC_NR, 3)
-#define USBTMC_IOCTL_ABORT_BULK_IN	_IO(USBTMC_IOC_NR, 4)
-#define USBTMC_IOCTL_CLEAR_OUT_HALT	_IO(USBTMC_IOC_NR, 6)
-#define USBTMC_IOCTL_CLEAR_IN_HALT	_IO(USBTMC_IOC_NR, 7)
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/usb/uas.h b/ANDROID_3.4.5/include/linux/usb/uas.h
deleted file mode 100644
index 9a988e41..00000000
--- a/ANDROID_3.4.5/include/linux/usb/uas.h
+++ /dev/null
@@ -1,69 +0,0 @@
-#ifndef __USB_UAS_H__
-#define __USB_UAS_H__
-
-#include <scsi/scsi.h>
-#include <scsi/scsi_cmnd.h>
-
-/* Common header for all IUs */
-struct iu {
-	__u8 iu_id;
-	__u8 rsvd1;
-	__be16 tag;
-};
-
-enum {
-	IU_ID_COMMAND		= 0x01,
-	IU_ID_STATUS		= 0x03,
-	IU_ID_RESPONSE		= 0x04,
-	IU_ID_TASK_MGMT		= 0x05,
-	IU_ID_READ_READY	= 0x06,
-	IU_ID_WRITE_READY	= 0x07,
-};
-
-struct command_iu {
-	__u8 iu_id;
-	__u8 rsvd1;
-	__be16 tag;
-	__u8 prio_attr;
-	__u8 rsvd5;
-	__u8 len;
-	__u8 rsvd7;
-	struct scsi_lun lun;
-	__u8 cdb[16];	/* XXX: Overflow-checking tools may misunderstand */
-};
-
-/*
- * Also used for the Read Ready and Write Ready IUs since they have the
- * same first four bytes
- */
-struct sense_iu {
-	__u8 iu_id;
-	__u8 rsvd1;
-	__be16 tag;
-	__be16 status_qual;
-	__u8 status;
-	__u8 rsvd7[7];
-	__be16 len;
-	__u8 sense[SCSI_SENSE_BUFFERSIZE];
-};
-
-struct usb_pipe_usage_descriptor {
-	__u8  bLength;
-	__u8  bDescriptorType;
-
-	__u8  bPipeID;
-	__u8  Reserved;
-} __attribute__((__packed__));
-
-enum {
-	CMD_PIPE_ID		= 1,
-	STATUS_PIPE_ID		= 2,
-	DATA_IN_PIPE_ID		= 3,
-	DATA_OUT_PIPE_ID	= 4,
-
-	UAS_SIMPLE_TAG		= 0,
-	UAS_HEAD_TAG		= 1,
-	UAS_ORDERED_TAG		= 2,
-	UAS_ACA			= 4,
-};
-#endif
diff --git a/ANDROID_3.4.5/include/linux/usb/ulpi.h b/ANDROID_3.4.5/include/linux/usb/ulpi.h
deleted file mode 100644
index 6f033a41..00000000
--- a/ANDROID_3.4.5/include/linux/usb/ulpi.h
+++ /dev/null
@@ -1,192 +0,0 @@
-/*
- * ulpi.h -- ULPI defines and function prorotypes
- *
- * Copyright (C) 2010 Nokia Corporation
- *
- * This software is distributed under the terms of the GNU General
- * Public License ("GPL") as published by the Free Software Foundation,
- * version 2 of that License.
- */
-
-#ifndef __LINUX_USB_ULPI_H
-#define __LINUX_USB_ULPI_H
-
-#include <linux/usb/otg.h>
-/*-------------------------------------------------------------------------*/
-
-/*
- * ULPI Flags
- */
-#define ULPI_OTG_ID_PULLUP		(1 << 0)
-#define ULPI_OTG_DP_PULLDOWN_DIS	(1 << 1)
-#define ULPI_OTG_DM_PULLDOWN_DIS	(1 << 2)
-#define ULPI_OTG_DISCHRGVBUS		(1 << 3)
-#define ULPI_OTG_CHRGVBUS		(1 << 4)
-#define ULPI_OTG_DRVVBUS		(1 << 5)
-#define ULPI_OTG_DRVVBUS_EXT		(1 << 6)
-#define ULPI_OTG_EXTVBUSIND		(1 << 7)
-
-#define ULPI_IC_6PIN_SERIAL		(1 << 8)
-#define ULPI_IC_3PIN_SERIAL		(1 << 9)
-#define ULPI_IC_CARKIT			(1 << 10)
-#define ULPI_IC_CLKSUSPM		(1 << 11)
-#define ULPI_IC_AUTORESUME		(1 << 12)
-#define ULPI_IC_EXTVBUS_INDINV		(1 << 13)
-#define ULPI_IC_IND_PASSTHRU		(1 << 14)
-#define ULPI_IC_PROTECT_DIS		(1 << 15)
-
-#define ULPI_FC_HS			(1 << 16)
-#define ULPI_FC_FS			(1 << 17)
-#define ULPI_FC_LS			(1 << 18)
-#define ULPI_FC_FS4LS			(1 << 19)
-#define ULPI_FC_TERMSEL			(1 << 20)
-#define ULPI_FC_OP_NORM			(1 << 21)
-#define ULPI_FC_OP_NODRV		(1 << 22)
-#define ULPI_FC_OP_DIS_NRZI		(1 << 23)
-#define ULPI_FC_OP_NSYNC_NEOP		(1 << 24)
-#define ULPI_FC_RST			(1 << 25)
-#define ULPI_FC_SUSPM			(1 << 26)
-
-/*-------------------------------------------------------------------------*/
-
-/*
- * Macros for Set and Clear
- * See ULPI 1.1 specification to find the registers with Set and Clear offsets
- */
-#define ULPI_SET(a)				(a + 1)
-#define ULPI_CLR(a)				(a + 2)
-
-/*-------------------------------------------------------------------------*/
-
-/*
- * Register Map
- */
-#define ULPI_VENDOR_ID_LOW			0x00
-#define ULPI_VENDOR_ID_HIGH			0x01
-#define ULPI_PRODUCT_ID_LOW			0x02
-#define ULPI_PRODUCT_ID_HIGH			0x03
-#define ULPI_FUNC_CTRL				0x04
-#define ULPI_IFC_CTRL				0x07
-#define ULPI_OTG_CTRL				0x0a
-#define ULPI_USB_INT_EN_RISE			0x0d
-#define ULPI_USB_INT_EN_FALL			0x10
-#define ULPI_USB_INT_STS			0x13
-#define ULPI_USB_INT_LATCH			0x14
-#define ULPI_DEBUG				0x15
-#define ULPI_SCRATCH				0x16
-/* Optional Carkit Registers */
-#define ULPI_CARCIT_CTRL			0x19
-#define ULPI_CARCIT_INT_DELAY			0x1c
-#define ULPI_CARCIT_INT_EN			0x1d
-#define ULPI_CARCIT_INT_STS			0x20
-#define ULPI_CARCIT_INT_LATCH			0x21
-#define ULPI_CARCIT_PLS_CTRL			0x22
-/* Other Optional Registers */
-#define ULPI_TX_POS_WIDTH			0x25
-#define ULPI_TX_NEG_WIDTH			0x26
-#define ULPI_POLARITY_RECOVERY			0x27
-/* Access Extended Register Set */
-#define ULPI_ACCESS_EXTENDED			0x2f
-/* Vendor Specific */
-#define ULPI_VENDOR_SPECIFIC			0x30
-/* Extended Registers */
-#define ULPI_EXT_VENDOR_SPECIFIC		0x80
-
-/*-------------------------------------------------------------------------*/
-
-/*
- * Register Bits
- */
-
-/* Function Control */
-#define ULPI_FUNC_CTRL_XCVRSEL			(1 << 0)
-#define  ULPI_FUNC_CTRL_XCVRSEL_MASK		(3 << 0)
-#define  ULPI_FUNC_CTRL_HIGH_SPEED		(0 << 0)
-#define  ULPI_FUNC_CTRL_FULL_SPEED		(1 << 0)
-#define  ULPI_FUNC_CTRL_LOW_SPEED		(2 << 0)
-#define  ULPI_FUNC_CTRL_FS4LS			(3 << 0)
-#define ULPI_FUNC_CTRL_TERMSELECT		(1 << 2)
-#define ULPI_FUNC_CTRL_OPMODE			(1 << 3)
-#define  ULPI_FUNC_CTRL_OPMODE_MASK		(3 << 3)
-#define  ULPI_FUNC_CTRL_OPMODE_NORMAL		(0 << 3)
-#define  ULPI_FUNC_CTRL_OPMODE_NONDRIVING	(1 << 3)
-#define  ULPI_FUNC_CTRL_OPMODE_DISABLE_NRZI	(2 << 3)
-#define  ULPI_FUNC_CTRL_OPMODE_NOSYNC_NOEOP	(3 << 3)
-#define ULPI_FUNC_CTRL_RESET			(1 << 5)
-#define ULPI_FUNC_CTRL_SUSPENDM			(1 << 6)
-
-/* Interface Control */
-#define ULPI_IFC_CTRL_6_PIN_SERIAL_MODE		(1 << 0)
-#define ULPI_IFC_CTRL_3_PIN_SERIAL_MODE		(1 << 1)
-#define ULPI_IFC_CTRL_CARKITMODE		(1 << 2)
-#define ULPI_IFC_CTRL_CLOCKSUSPENDM		(1 << 3)
-#define ULPI_IFC_CTRL_AUTORESUME		(1 << 4)
-#define ULPI_IFC_CTRL_EXTERNAL_VBUS		(1 << 5)
-#define ULPI_IFC_CTRL_PASSTHRU			(1 << 6)
-#define ULPI_IFC_CTRL_PROTECT_IFC_DISABLE	(1 << 7)
-
-/* OTG Control */
-#define ULPI_OTG_CTRL_ID_PULLUP			(1 << 0)
-#define ULPI_OTG_CTRL_DP_PULLDOWN		(1 << 1)
-#define ULPI_OTG_CTRL_DM_PULLDOWN		(1 << 2)
-#define ULPI_OTG_CTRL_DISCHRGVBUS		(1 << 3)
-#define ULPI_OTG_CTRL_CHRGVBUS			(1 << 4)
-#define ULPI_OTG_CTRL_DRVVBUS			(1 << 5)
-#define ULPI_OTG_CTRL_DRVVBUS_EXT		(1 << 6)
-#define ULPI_OTG_CTRL_EXTVBUSIND		(1 << 7)
-
-/* USB Interrupt Enable Rising,
- * USB Interrupt Enable Falling,
- * USB Interrupt Status and
- * USB Interrupt Latch
- */
-#define ULPI_INT_HOST_DISCONNECT		(1 << 0)
-#define ULPI_INT_VBUS_VALID			(1 << 1)
-#define ULPI_INT_SESS_VALID			(1 << 2)
-#define ULPI_INT_SESS_END			(1 << 3)
-#define ULPI_INT_IDGRD				(1 << 4)
-
-/* Debug */
-#define ULPI_DEBUG_LINESTATE0			(1 << 0)
-#define ULPI_DEBUG_LINESTATE1			(1 << 1)
-
-/* Carkit Control */
-#define ULPI_CARKIT_CTRL_CARKITPWR		(1 << 0)
-#define ULPI_CARKIT_CTRL_IDGNDDRV		(1 << 1)
-#define ULPI_CARKIT_CTRL_TXDEN			(1 << 2)
-#define ULPI_CARKIT_CTRL_RXDEN			(1 << 3)
-#define ULPI_CARKIT_CTRL_SPKLEFTEN		(1 << 4)
-#define ULPI_CARKIT_CTRL_SPKRIGHTEN		(1 << 5)
-#define ULPI_CARKIT_CTRL_MICEN			(1 << 6)
-
-/* Carkit Interrupt Enable */
-#define ULPI_CARKIT_INT_EN_IDFLOAT_RISE		(1 << 0)
-#define ULPI_CARKIT_INT_EN_IDFLOAT_FALL		(1 << 1)
-#define ULPI_CARKIT_INT_EN_CARINTDET		(1 << 2)
-#define ULPI_CARKIT_INT_EN_DP_RISE		(1 << 3)
-#define ULPI_CARKIT_INT_EN_DP_FALL		(1 << 4)
-
-/* Carkit Interrupt Status and
- * Carkit Interrupt Latch
- */
-#define ULPI_CARKIT_INT_IDFLOAT			(1 << 0)
-#define ULPI_CARKIT_INT_CARINTDET		(1 << 1)
-#define ULPI_CARKIT_INT_DP			(1 << 2)
-
-/* Carkit Pulse Control*/
-#define ULPI_CARKIT_PLS_CTRL_TXPLSEN		(1 << 0)
-#define ULPI_CARKIT_PLS_CTRL_RXPLSEN		(1 << 1)
-#define ULPI_CARKIT_PLS_CTRL_SPKRLEFT_BIASEN	(1 << 2)
-#define ULPI_CARKIT_PLS_CTRL_SPKRRIGHT_BIASEN	(1 << 3)
-
-/*-------------------------------------------------------------------------*/
-
-struct usb_phy *otg_ulpi_create(struct usb_phy_io_ops *ops,
-					unsigned int flags);
-
-#ifdef CONFIG_USB_ULPI_VIEWPORT
-/* access ops for controllers with a viewport register */
-extern struct usb_phy_io_ops ulpi_viewport_access_ops;
-#endif
-
-#endif /* __LINUX_USB_ULPI_H */
diff --git a/ANDROID_3.4.5/include/linux/usb/usbnet.h b/ANDROID_3.4.5/include/linux/usb/usbnet.h
deleted file mode 100644
index 76f43964..00000000
--- a/ANDROID_3.4.5/include/linux/usb/usbnet.h
+++ /dev/null
@@ -1,232 +0,0 @@
-/*
- * USB Networking Link Interface
- *
- * Copyright (C) 2000-2005 by David Brownell <dbrownell@users.sourceforge.net>
- * Copyright (C) 2003-2005 David Hollis <dhollis@davehollis.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef	__LINUX_USB_USBNET_H
-#define	__LINUX_USB_USBNET_H
-
-/* interface from usbnet core to each USB networking link we handle */
-struct usbnet {
-	/* housekeeping */
-	struct usb_device	*udev;
-	struct usb_interface	*intf;
-	struct driver_info	*driver_info;
-	const char		*driver_name;
-	void			*driver_priv;
-	wait_queue_head_t	*wait;
-	struct mutex		phy_mutex;
-	unsigned char		suspend_count;
-
-	/* i/o info: pipes etc */
-	unsigned		in, out;
-	struct usb_host_endpoint *status;
-	unsigned		maxpacket;
-	struct timer_list	delay;
-
-	/* protocol/interface state */
-	struct net_device	*net;
-	int			msg_enable;
-	unsigned long		data[5];
-	u32			xid;
-	u32			hard_mtu;	/* count any extra framing */
-	size_t			rx_urb_size;	/* size for rx urbs */
-	struct mii_if_info	mii;
-
-	/* various kinds of pending driver work */
-	struct sk_buff_head	rxq;
-	struct sk_buff_head	txq;
-	struct sk_buff_head	done;
-	struct sk_buff_head	rxq_pause;
-	struct urb		*interrupt;
-	struct usb_anchor	deferred;
-	struct tasklet_struct	bh;
-
-	struct work_struct	kevent;
-	unsigned long		flags;
-#		define EVENT_TX_HALT	0
-#		define EVENT_RX_HALT	1
-#		define EVENT_RX_MEMORY	2
-#		define EVENT_STS_SPLIT	3
-#		define EVENT_LINK_RESET	4
-#		define EVENT_RX_PAUSED	5
-#		define EVENT_DEV_WAKING 6
-#		define EVENT_DEV_ASLEEP 7
-#		define EVENT_DEV_OPEN	8
-};
-
-static inline struct usb_driver *driver_of(struct usb_interface *intf)
-{
-	return to_usb_driver(intf->dev.driver);
-}
-
-/* interface from the device/framing level "minidriver" to core */
-struct driver_info {
-	char		*description;
-
-	int		flags;
-/* framing is CDC Ethernet, not writing ZLPs (hw issues), or optionally: */
-#define FLAG_FRAMING_NC	0x0001		/* guard against device dropouts */
-#define FLAG_FRAMING_GL	0x0002		/* genelink batches packets */
-#define FLAG_FRAMING_Z	0x0004		/* zaurus adds a trailer */
-#define FLAG_FRAMING_RN	0x0008		/* RNDIS batches, plus huge header */
-
-#define FLAG_NO_SETINT	0x0010		/* device can't set_interface() */
-#define FLAG_ETHER	0x0020		/* maybe use "eth%d" names */
-
-#define FLAG_FRAMING_AX 0x0040		/* AX88772/178 packets */
-#define FLAG_WLAN	0x0080		/* use "wlan%d" names */
-#define FLAG_AVOID_UNLINK_URBS 0x0100	/* don't unlink urbs at usbnet_stop() */
-#define FLAG_SEND_ZLP	0x0200		/* hw requires ZLPs are sent */
-#define FLAG_WWAN	0x0400		/* use "wwan%d" names */
-
-#define FLAG_LINK_INTR	0x0800		/* updates link (carrier) status */
-
-#define FLAG_POINTTOPOINT 0x1000	/* possibly use "usb%d" names */
-
-/*
- * Indicates to usbnet, that USB driver accumulates multiple IP packets.
- * Affects statistic (counters) and short packet handling.
- */
-#define FLAG_MULTI_PACKET	0x2000
-#define FLAG_RX_ASSEMBLE	0x4000	/* rx packets may span >1 frames */
-
-	/* init device ... can sleep, or cause probe() failure */
-	int	(*bind)(struct usbnet *, struct usb_interface *);
-
-	/* cleanup device ... can sleep, but can't fail */
-	void	(*unbind)(struct usbnet *, struct usb_interface *);
-
-	/* reset device ... can sleep */
-	int	(*reset)(struct usbnet *);
-
-	/* stop device ... can sleep */
-	int	(*stop)(struct usbnet *);
-
-	/* see if peer is connected ... can sleep */
-	int	(*check_connect)(struct usbnet *);
-
-	/* (dis)activate runtime power management */
-	int	(*manage_power)(struct usbnet *, int);
-
-	/* for status polling */
-	void	(*status)(struct usbnet *, struct urb *);
-
-	/* link reset handling, called from defer_kevent */
-	int	(*link_reset)(struct usbnet *);
-
-	/* fixup rx packet (strip framing) */
-	int	(*rx_fixup)(struct usbnet *dev, struct sk_buff *skb);
-
-	/* fixup tx packet (add framing) */
-	struct sk_buff	*(*tx_fixup)(struct usbnet *dev,
-				struct sk_buff *skb, gfp_t flags);
-
-	/* early initialization code, can sleep. This is for minidrivers
-	 * having 'subminidrivers' that need to do extra initialization
-	 * right after minidriver have initialized hardware. */
-	int	(*early_init)(struct usbnet *dev);
-
-	/* called by minidriver when receiving indication */
-	void	(*indication)(struct usbnet *dev, void *ind, int indlen);
-
-	/* for new devices, use the descriptor-reading code instead */
-	int		in;		/* rx endpoint */
-	int		out;		/* tx endpoint */
-
-	unsigned long	data;		/* Misc driver specific data */
-};
-
-/* Minidrivers are just drivers using the "usbnet" core as a powerful
- * network-specific subroutine library ... that happens to do pretty
- * much everything except custom framing and chip-specific stuff.
- */
-extern int usbnet_probe(struct usb_interface *, const struct usb_device_id *);
-extern int usbnet_suspend(struct usb_interface *, pm_message_t);
-extern int usbnet_resume(struct usb_interface *);
-extern void usbnet_disconnect(struct usb_interface *);
-
-
-/* Drivers that reuse some of the standard USB CDC infrastructure
- * (notably, using multiple interfaces according to the CDC
- * union descriptor) get some helper code.
- */
-struct cdc_state {
-	struct usb_cdc_header_desc	*header;
-	struct usb_cdc_union_desc	*u;
-	struct usb_cdc_ether_desc	*ether;
-	struct usb_interface		*control;
-	struct usb_interface		*data;
-};
-
-extern int usbnet_generic_cdc_bind(struct usbnet *, struct usb_interface *);
-extern int usbnet_cdc_bind(struct usbnet *, struct usb_interface *);
-extern void usbnet_cdc_unbind(struct usbnet *, struct usb_interface *);
-extern void usbnet_cdc_status(struct usbnet *, struct urb *);
-
-/* CDC and RNDIS support the same host-chosen packet filters for IN transfers */
-#define	DEFAULT_FILTER	(USB_CDC_PACKET_TYPE_BROADCAST \
-			|USB_CDC_PACKET_TYPE_ALL_MULTICAST \
-			|USB_CDC_PACKET_TYPE_PROMISCUOUS \
-			|USB_CDC_PACKET_TYPE_DIRECTED)
-
-
-/* we record the state for each of our queued skbs */
-enum skb_state {
-	illegal = 0,
-	tx_start, tx_done,
-	rx_start, rx_done, rx_cleanup,
-	unlink_start
-};
-
-struct skb_data {	/* skb->cb is one of these */
-	struct urb		*urb;
-	struct usbnet		*dev;
-	enum skb_state		state;
-	size_t			length;
-};
-
-extern int usbnet_open(struct net_device *net);
-extern int usbnet_stop(struct net_device *net);
-extern netdev_tx_t usbnet_start_xmit(struct sk_buff *skb,
-				     struct net_device *net);
-extern void usbnet_tx_timeout(struct net_device *net);
-extern int usbnet_change_mtu(struct net_device *net, int new_mtu);
-
-extern int usbnet_get_endpoints(struct usbnet *, struct usb_interface *);
-extern int usbnet_get_ethernet_addr(struct usbnet *, int);
-extern void usbnet_defer_kevent(struct usbnet *, int);
-extern void usbnet_skb_return(struct usbnet *, struct sk_buff *);
-extern void usbnet_unlink_rx_urbs(struct usbnet *);
-
-extern void usbnet_pause_rx(struct usbnet *);
-extern void usbnet_resume_rx(struct usbnet *);
-extern void usbnet_purge_paused_rxq(struct usbnet *);
-
-extern int usbnet_get_settings(struct net_device *net,
-			       struct ethtool_cmd *cmd);
-extern int usbnet_set_settings(struct net_device *net,
-			       struct ethtool_cmd *cmd);
-extern u32 usbnet_get_link(struct net_device *net);
-extern u32 usbnet_get_msglevel(struct net_device *);
-extern void usbnet_set_msglevel(struct net_device *, u32);
-extern void usbnet_get_drvinfo(struct net_device *, struct ethtool_drvinfo *);
-extern int usbnet_nway_reset(struct net_device *net);
-
-#endif /* __LINUX_USB_USBNET_H */
diff --git a/ANDROID_3.4.5/include/linux/usb/video.h b/ANDROID_3.4.5/include/linux/usb/video.h
deleted file mode 100644
index 3b3b95e0..00000000
--- a/ANDROID_3.4.5/include/linux/usb/video.h
+++ /dev/null
@@ -1,568 +0,0 @@
-/*
- * USB Video Class definitions.
- *
- * Copyright (C) 2009 Laurent Pinchart <laurent.pinchart@skynet.be>
- *
- * This file holds USB constants and structures defined by the USB Device
- * Class Definition for Video Devices. Unless otherwise stated, comments
- * below reference relevant sections of the USB Video Class 1.1 specification
- * available at
- *
- * http://www.usb.org/developers/devclass_docs/USB_Video_Class_1_1.zip
- */
-
-#ifndef __LINUX_USB_VIDEO_H
-#define __LINUX_USB_VIDEO_H
-
-#include <linux/types.h>
-
-/* --------------------------------------------------------------------------
- * UVC constants
- */
-
-/* A.2. Video Interface Subclass Codes */
-#define UVC_SC_UNDEFINED				0x00
-#define UVC_SC_VIDEOCONTROL				0x01
-#define UVC_SC_VIDEOSTREAMING				0x02
-#define UVC_SC_VIDEO_INTERFACE_COLLECTION		0x03
-
-/* A.3. Video Interface Protocol Codes */
-#define UVC_PC_PROTOCOL_UNDEFINED			0x00
-
-/* A.5. Video Class-Specific VC Interface Descriptor Subtypes */
-#define UVC_VC_DESCRIPTOR_UNDEFINED			0x00
-#define UVC_VC_HEADER					0x01
-#define UVC_VC_INPUT_TERMINAL				0x02
-#define UVC_VC_OUTPUT_TERMINAL				0x03
-#define UVC_VC_SELECTOR_UNIT				0x04
-#define UVC_VC_PROCESSING_UNIT				0x05
-#define UVC_VC_EXTENSION_UNIT				0x06
-
-/* A.6. Video Class-Specific VS Interface Descriptor Subtypes */
-#define UVC_VS_UNDEFINED				0x00
-#define UVC_VS_INPUT_HEADER				0x01
-#define UVC_VS_OUTPUT_HEADER				0x02
-#define UVC_VS_STILL_IMAGE_FRAME			0x03
-#define UVC_VS_FORMAT_UNCOMPRESSED			0x04
-#define UVC_VS_FRAME_UNCOMPRESSED			0x05
-#define UVC_VS_FORMAT_MJPEG				0x06
-#define UVC_VS_FRAME_MJPEG				0x07
-#define UVC_VS_FORMAT_MPEG2TS				0x0a
-#define UVC_VS_FORMAT_DV				0x0c
-#define UVC_VS_COLORFORMAT				0x0d
-#define UVC_VS_FORMAT_FRAME_BASED			0x10
-#define UVC_VS_FRAME_FRAME_BASED			0x11
-#define UVC_VS_FORMAT_STREAM_BASED			0x12
-
-/* A.7. Video Class-Specific Endpoint Descriptor Subtypes */
-#define UVC_EP_UNDEFINED				0x00
-#define UVC_EP_GENERAL					0x01
-#define UVC_EP_ENDPOINT					0x02
-#define UVC_EP_INTERRUPT				0x03
-
-/* A.8. Video Class-Specific Request Codes */
-#define UVC_RC_UNDEFINED				0x00
-#define UVC_SET_CUR					0x01
-#define UVC_GET_CUR					0x81
-#define UVC_GET_MIN					0x82
-#define UVC_GET_MAX					0x83
-#define UVC_GET_RES					0x84
-#define UVC_GET_LEN					0x85
-#define UVC_GET_INFO					0x86
-#define UVC_GET_DEF					0x87
-
-/* A.9.1. VideoControl Interface Control Selectors */
-#define UVC_VC_CONTROL_UNDEFINED			0x00
-#define UVC_VC_VIDEO_POWER_MODE_CONTROL			0x01
-#define UVC_VC_REQUEST_ERROR_CODE_CONTROL		0x02
-
-/* A.9.2. Terminal Control Selectors */
-#define UVC_TE_CONTROL_UNDEFINED			0x00
-
-/* A.9.3. Selector Unit Control Selectors */
-#define UVC_SU_CONTROL_UNDEFINED			0x00
-#define UVC_SU_INPUT_SELECT_CONTROL			0x01
-
-/* A.9.4. Camera Terminal Control Selectors */
-#define UVC_CT_CONTROL_UNDEFINED			0x00
-#define UVC_CT_SCANNING_MODE_CONTROL			0x01
-#define UVC_CT_AE_MODE_CONTROL				0x02
-#define UVC_CT_AE_PRIORITY_CONTROL			0x03
-#define UVC_CT_EXPOSURE_TIME_ABSOLUTE_CONTROL		0x04
-#define UVC_CT_EXPOSURE_TIME_RELATIVE_CONTROL		0x05
-#define UVC_CT_FOCUS_ABSOLUTE_CONTROL			0x06
-#define UVC_CT_FOCUS_RELATIVE_CONTROL			0x07
-#define UVC_CT_FOCUS_AUTO_CONTROL			0x08
-#define UVC_CT_IRIS_ABSOLUTE_CONTROL			0x09
-#define UVC_CT_IRIS_RELATIVE_CONTROL			0x0a
-#define UVC_CT_ZOOM_ABSOLUTE_CONTROL			0x0b
-#define UVC_CT_ZOOM_RELATIVE_CONTROL			0x0c
-#define UVC_CT_PANTILT_ABSOLUTE_CONTROL			0x0d
-#define UVC_CT_PANTILT_RELATIVE_CONTROL			0x0e
-#define UVC_CT_ROLL_ABSOLUTE_CONTROL			0x0f
-#define UVC_CT_ROLL_RELATIVE_CONTROL			0x10
-#define UVC_CT_PRIVACY_CONTROL				0x11
-
-/* A.9.5. Processing Unit Control Selectors */
-#define UVC_PU_CONTROL_UNDEFINED			0x00
-#define UVC_PU_BACKLIGHT_COMPENSATION_CONTROL		0x01
-#define UVC_PU_BRIGHTNESS_CONTROL			0x02
-#define UVC_PU_CONTRAST_CONTROL				0x03
-#define UVC_PU_GAIN_CONTROL				0x04
-#define UVC_PU_POWER_LINE_FREQUENCY_CONTROL		0x05
-#define UVC_PU_HUE_CONTROL				0x06
-#define UVC_PU_SATURATION_CONTROL			0x07
-#define UVC_PU_SHARPNESS_CONTROL			0x08
-#define UVC_PU_GAMMA_CONTROL				0x09
-#define UVC_PU_WHITE_BALANCE_TEMPERATURE_CONTROL	0x0a
-#define UVC_PU_WHITE_BALANCE_TEMPERATURE_AUTO_CONTROL	0x0b
-#define UVC_PU_WHITE_BALANCE_COMPONENT_CONTROL		0x0c
-#define UVC_PU_WHITE_BALANCE_COMPONENT_AUTO_CONTROL	0x0d
-#define UVC_PU_DIGITAL_MULTIPLIER_CONTROL		0x0e
-#define UVC_PU_DIGITAL_MULTIPLIER_LIMIT_CONTROL		0x0f
-#define UVC_PU_HUE_AUTO_CONTROL				0x10
-#define UVC_PU_ANALOG_VIDEO_STANDARD_CONTROL		0x11
-#define UVC_PU_ANALOG_LOCK_STATUS_CONTROL		0x12
-
-/* A.9.7. VideoStreaming Interface Control Selectors */
-#define UVC_VS_CONTROL_UNDEFINED			0x00
-#define UVC_VS_PROBE_CONTROL				0x01
-#define UVC_VS_COMMIT_CONTROL				0x02
-#define UVC_VS_STILL_PROBE_CONTROL			0x03
-#define UVC_VS_STILL_COMMIT_CONTROL			0x04
-#define UVC_VS_STILL_IMAGE_TRIGGER_CONTROL		0x05
-#define UVC_VS_STREAM_ERROR_CODE_CONTROL		0x06
-#define UVC_VS_GENERATE_KEY_FRAME_CONTROL		0x07
-#define UVC_VS_UPDATE_FRAME_SEGMENT_CONTROL		0x08
-#define UVC_VS_SYNC_DELAY_CONTROL			0x09
-
-/* B.1. USB Terminal Types */
-#define UVC_TT_VENDOR_SPECIFIC				0x0100
-#define UVC_TT_STREAMING				0x0101
-
-/* B.2. Input Terminal Types */
-#define UVC_ITT_VENDOR_SPECIFIC				0x0200
-#define UVC_ITT_CAMERA					0x0201
-#define UVC_ITT_MEDIA_TRANSPORT_INPUT			0x0202
-
-/* B.3. Output Terminal Types */
-#define UVC_OTT_VENDOR_SPECIFIC				0x0300
-#define UVC_OTT_DISPLAY					0x0301
-#define UVC_OTT_MEDIA_TRANSPORT_OUTPUT			0x0302
-
-/* B.4. External Terminal Types */
-#define UVC_EXTERNAL_VENDOR_SPECIFIC			0x0400
-#define UVC_COMPOSITE_CONNECTOR				0x0401
-#define UVC_SVIDEO_CONNECTOR				0x0402
-#define UVC_COMPONENT_CONNECTOR				0x0403
-
-/* 2.4.2.2. Status Packet Type */
-#define UVC_STATUS_TYPE_CONTROL				1
-#define UVC_STATUS_TYPE_STREAMING			2
-
-/* 2.4.3.3. Payload Header Information */
-#define UVC_STREAM_EOH					(1 << 7)
-#define UVC_STREAM_ERR					(1 << 6)
-#define UVC_STREAM_STI					(1 << 5)
-#define UVC_STREAM_RES					(1 << 4)
-#define UVC_STREAM_SCR					(1 << 3)
-#define UVC_STREAM_PTS					(1 << 2)
-#define UVC_STREAM_EOF					(1 << 1)
-#define UVC_STREAM_FID					(1 << 0)
-
-/* 4.1.2. Control Capabilities */
-#define UVC_CONTROL_CAP_GET				(1 << 0)
-#define UVC_CONTROL_CAP_SET				(1 << 1)
-#define UVC_CONTROL_CAP_DISABLED			(1 << 2)
-#define UVC_CONTROL_CAP_AUTOUPDATE			(1 << 3)
-#define UVC_CONTROL_CAP_ASYNCHRONOUS			(1 << 4)
-
-/* ------------------------------------------------------------------------
- * UVC structures
- */
-
-/* All UVC descriptors have these 3 fields at the beginning */
-struct uvc_descriptor_header {
-	__u8  bLength;
-	__u8  bDescriptorType;
-	__u8  bDescriptorSubType;
-} __attribute__((packed));
-
-/* 3.7.2. Video Control Interface Header Descriptor */
-struct uvc_header_descriptor {
-	__u8  bLength;
-	__u8  bDescriptorType;
-	__u8  bDescriptorSubType;
-	__u16 bcdUVC;
-	__u16 wTotalLength;
-	__u32 dwClockFrequency;
-	__u8  bInCollection;
-	__u8  baInterfaceNr[];
-} __attribute__((__packed__));
-
-#define UVC_DT_HEADER_SIZE(n)				(12+(n))
-
-#define UVC_HEADER_DESCRIPTOR(n) \
-	uvc_header_descriptor_##n
-
-#define DECLARE_UVC_HEADER_DESCRIPTOR(n)		\
-struct UVC_HEADER_DESCRIPTOR(n) {			\
-	__u8  bLength;					\
-	__u8  bDescriptorType;				\
-	__u8  bDescriptorSubType;			\
-	__u16 bcdUVC;					\
-	__u16 wTotalLength;				\
-	__u32 dwClockFrequency;				\
-	__u8  bInCollection;				\
-	__u8  baInterfaceNr[n];				\
-} __attribute__ ((packed))
-
-/* 3.7.2.1. Input Terminal Descriptor */
-struct uvc_input_terminal_descriptor {
-	__u8  bLength;
-	__u8  bDescriptorType;
-	__u8  bDescriptorSubType;
-	__u8  bTerminalID;
-	__u16 wTerminalType;
-	__u8  bAssocTerminal;
-	__u8  iTerminal;
-} __attribute__((__packed__));
-
-#define UVC_DT_INPUT_TERMINAL_SIZE			8
-
-/* 3.7.2.2. Output Terminal Descriptor */
-struct uvc_output_terminal_descriptor {
-	__u8  bLength;
-	__u8  bDescriptorType;
-	__u8  bDescriptorSubType;
-	__u8  bTerminalID;
-	__u16 wTerminalType;
-	__u8  bAssocTerminal;
-	__u8  bSourceID;
-	__u8  iTerminal;
-} __attribute__((__packed__));
-
-#define UVC_DT_OUTPUT_TERMINAL_SIZE			9
-
-/* 3.7.2.3. Camera Terminal Descriptor */
-struct uvc_camera_terminal_descriptor {
-	__u8  bLength;
-	__u8  bDescriptorType;
-	__u8  bDescriptorSubType;
-	__u8  bTerminalID;
-	__u16 wTerminalType;
-	__u8  bAssocTerminal;
-	__u8  iTerminal;
-	__u16 wObjectiveFocalLengthMin;
-	__u16 wObjectiveFocalLengthMax;
-	__u16 wOcularFocalLength;
-	__u8  bControlSize;
-	__u8  bmControls[3];
-} __attribute__((__packed__));
-
-#define UVC_DT_CAMERA_TERMINAL_SIZE(n)			(15+(n))
-
-/* 3.7.2.4. Selector Unit Descriptor */
-struct uvc_selector_unit_descriptor {
-	__u8  bLength;
-	__u8  bDescriptorType;
-	__u8  bDescriptorSubType;
-	__u8  bUnitID;
-	__u8  bNrInPins;
-	__u8  baSourceID[0];
-	__u8  iSelector;
-} __attribute__((__packed__));
-
-#define UVC_DT_SELECTOR_UNIT_SIZE(n)			(6+(n))
-
-#define UVC_SELECTOR_UNIT_DESCRIPTOR(n)	\
-	uvc_selector_unit_descriptor_##n
-
-#define DECLARE_UVC_SELECTOR_UNIT_DESCRIPTOR(n)	\
-struct UVC_SELECTOR_UNIT_DESCRIPTOR(n) {		\
-	__u8  bLength;					\
-	__u8  bDescriptorType;				\
-	__u8  bDescriptorSubType;			\
-	__u8  bUnitID;					\
-	__u8  bNrInPins;				\
-	__u8  baSourceID[n];				\
-	__u8  iSelector;				\
-} __attribute__ ((packed))
-
-/* 3.7.2.5. Processing Unit Descriptor */
-struct uvc_processing_unit_descriptor {
-	__u8  bLength;
-	__u8  bDescriptorType;
-	__u8  bDescriptorSubType;
-	__u8  bUnitID;
-	__u8  bSourceID;
-	__u16 wMaxMultiplier;
-	__u8  bControlSize;
-	__u8  bmControls[2];
-	__u8  iProcessing;
-} __attribute__((__packed__));
-
-#define UVC_DT_PROCESSING_UNIT_SIZE(n)			(9+(n))
-
-/* 3.7.2.6. Extension Unit Descriptor */
-struct uvc_extension_unit_descriptor {
-	__u8  bLength;
-	__u8  bDescriptorType;
-	__u8  bDescriptorSubType;
-	__u8  bUnitID;
-	__u8  guidExtensionCode[16];
-	__u8  bNumControls;
-	__u8  bNrInPins;
-	__u8  baSourceID[0];
-	__u8  bControlSize;
-	__u8  bmControls[0];
-	__u8  iExtension;
-} __attribute__((__packed__));
-
-#define UVC_DT_EXTENSION_UNIT_SIZE(p, n)		(24+(p)+(n))
-
-#define UVC_EXTENSION_UNIT_DESCRIPTOR(p, n) \
-	uvc_extension_unit_descriptor_##p_##n
-
-#define DECLARE_UVC_EXTENSION_UNIT_DESCRIPTOR(p, n)	\
-struct UVC_EXTENSION_UNIT_DESCRIPTOR(p, n) {		\
-	__u8  bLength;					\
-	__u8  bDescriptorType;				\
-	__u8  bDescriptorSubType;			\
-	__u8  bUnitID;					\
-	__u8  guidExtensionCode[16];			\
-	__u8  bNumControls;				\
-	__u8  bNrInPins;				\
-	__u8  baSourceID[p];				\
-	__u8  bControlSize;				\
-	__u8  bmControls[n];				\
-	__u8  iExtension;				\
-} __attribute__ ((packed))
-
-/* 3.8.2.2. Video Control Interrupt Endpoint Descriptor */
-struct uvc_control_endpoint_descriptor {
-	__u8  bLength;
-	__u8  bDescriptorType;
-	__u8  bDescriptorSubType;
-	__u16 wMaxTransferSize;
-} __attribute__((__packed__));
-
-#define UVC_DT_CONTROL_ENDPOINT_SIZE			5
-
-/* 3.9.2.1. Input Header Descriptor */
-struct uvc_input_header_descriptor {
-	__u8  bLength;
-	__u8  bDescriptorType;
-	__u8  bDescriptorSubType;
-	__u8  bNumFormats;
-	__u16 wTotalLength;
-	__u8  bEndpointAddress;
-	__u8  bmInfo;
-	__u8  bTerminalLink;
-	__u8  bStillCaptureMethod;
-	__u8  bTriggerSupport;
-	__u8  bTriggerUsage;
-	__u8  bControlSize;
-	__u8  bmaControls[];
-} __attribute__((__packed__));
-
-#define UVC_DT_INPUT_HEADER_SIZE(n, p)			(13+(n*p))
-
-#define UVC_INPUT_HEADER_DESCRIPTOR(n, p) \
-	uvc_input_header_descriptor_##n_##p
-
-#define DECLARE_UVC_INPUT_HEADER_DESCRIPTOR(n, p)	\
-struct UVC_INPUT_HEADER_DESCRIPTOR(n, p) {		\
-	__u8  bLength;					\
-	__u8  bDescriptorType;				\
-	__u8  bDescriptorSubType;			\
-	__u8  bNumFormats;				\
-	__u16 wTotalLength;				\
-	__u8  bEndpointAddress;				\
-	__u8  bmInfo;					\
-	__u8  bTerminalLink;				\
-	__u8  bStillCaptureMethod;			\
-	__u8  bTriggerSupport;				\
-	__u8  bTriggerUsage;				\
-	__u8  bControlSize;				\
-	__u8  bmaControls[p][n];			\
-} __attribute__ ((packed))
-
-/* 3.9.2.2. Output Header Descriptor */
-struct uvc_output_header_descriptor {
-	__u8  bLength;
-	__u8  bDescriptorType;
-	__u8  bDescriptorSubType;
-	__u8  bNumFormats;
-	__u16 wTotalLength;
-	__u8  bEndpointAddress;
-	__u8  bTerminalLink;
-	__u8  bControlSize;
-	__u8  bmaControls[];
-} __attribute__((__packed__));
-
-#define UVC_DT_OUTPUT_HEADER_SIZE(n, p)			(9+(n*p))
-
-#define UVC_OUTPUT_HEADER_DESCRIPTOR(n, p) \
-	uvc_output_header_descriptor_##n_##p
-
-#define DECLARE_UVC_OUTPUT_HEADER_DESCRIPTOR(n, p)	\
-struct UVC_OUTPUT_HEADER_DESCRIPTOR(n, p) {		\
-	__u8  bLength;					\
-	__u8  bDescriptorType;				\
-	__u8  bDescriptorSubType;			\
-	__u8  bNumFormats;				\
-	__u16 wTotalLength;				\
-	__u8  bEndpointAddress;				\
-	__u8  bTerminalLink;				\
-	__u8  bControlSize;				\
-	__u8  bmaControls[p][n];			\
-} __attribute__ ((packed))
-
-/* 3.9.2.6. Color matching descriptor */
-struct uvc_color_matching_descriptor {
-	__u8  bLength;
-	__u8  bDescriptorType;
-	__u8  bDescriptorSubType;
-	__u8  bColorPrimaries;
-	__u8  bTransferCharacteristics;
-	__u8  bMatrixCoefficients;
-} __attribute__((__packed__));
-
-#define UVC_DT_COLOR_MATCHING_SIZE			6
-
-/* 4.3.1.1. Video Probe and Commit Controls */
-struct uvc_streaming_control {
-	__u16 bmHint;
-	__u8  bFormatIndex;
-	__u8  bFrameIndex;
-	__u32 dwFrameInterval;
-	__u16 wKeyFrameRate;
-	__u16 wPFrameRate;
-	__u16 wCompQuality;
-	__u16 wCompWindowSize;
-	__u16 wDelay;
-	__u32 dwMaxVideoFrameSize;
-	__u32 dwMaxPayloadTransferSize;
-	__u32 dwClockFrequency;
-	__u8  bmFramingInfo;
-	__u8  bPreferedVersion;
-	__u8  bMinVersion;
-	__u8  bMaxVersion;
-} __attribute__((__packed__));
-
-/* Uncompressed Payload - 3.1.1. Uncompressed Video Format Descriptor */
-struct uvc_format_uncompressed {
-	__u8  bLength;
-	__u8  bDescriptorType;
-	__u8  bDescriptorSubType;
-	__u8  bFormatIndex;
-	__u8  bNumFrameDescriptors;
-	__u8  guidFormat[16];
-	__u8  bBitsPerPixel;
-	__u8  bDefaultFrameIndex;
-	__u8  bAspectRatioX;
-	__u8  bAspectRatioY;
-	__u8  bmInterfaceFlags;
-	__u8  bCopyProtect;
-} __attribute__((__packed__));
-
-#define UVC_DT_FORMAT_UNCOMPRESSED_SIZE			27
-
-/* Uncompressed Payload - 3.1.2. Uncompressed Video Frame Descriptor */
-struct uvc_frame_uncompressed {
-	__u8  bLength;
-	__u8  bDescriptorType;
-	__u8  bDescriptorSubType;
-	__u8  bFrameIndex;
-	__u8  bmCapabilities;
-	__u16 wWidth;
-	__u16 wHeight;
-	__u32 dwMinBitRate;
-	__u32 dwMaxBitRate;
-	__u32 dwMaxVideoFrameBufferSize;
-	__u32 dwDefaultFrameInterval;
-	__u8  bFrameIntervalType;
-	__u32 dwFrameInterval[];
-} __attribute__((__packed__));
-
-#define UVC_DT_FRAME_UNCOMPRESSED_SIZE(n)		(26+4*(n))
-
-#define UVC_FRAME_UNCOMPRESSED(n) \
-	uvc_frame_uncompressed_##n
-
-#define DECLARE_UVC_FRAME_UNCOMPRESSED(n)		\
-struct UVC_FRAME_UNCOMPRESSED(n) {			\
-	__u8  bLength;					\
-	__u8  bDescriptorType;				\
-	__u8  bDescriptorSubType;			\
-	__u8  bFrameIndex;				\
-	__u8  bmCapabilities;				\
-	__u16 wWidth;					\
-	__u16 wHeight;					\
-	__u32 dwMinBitRate;				\
-	__u32 dwMaxBitRate;				\
-	__u32 dwMaxVideoFrameBufferSize;		\
-	__u32 dwDefaultFrameInterval;			\
-	__u8  bFrameIntervalType;			\
-	__u32 dwFrameInterval[n];			\
-} __attribute__ ((packed))
-
-/* MJPEG Payload - 3.1.1. MJPEG Video Format Descriptor */
-struct uvc_format_mjpeg {
-	__u8  bLength;
-	__u8  bDescriptorType;
-	__u8  bDescriptorSubType;
-	__u8  bFormatIndex;
-	__u8  bNumFrameDescriptors;
-	__u8  bmFlags;
-	__u8  bDefaultFrameIndex;
-	__u8  bAspectRatioX;
-	__u8  bAspectRatioY;
-	__u8  bmInterfaceFlags;
-	__u8  bCopyProtect;
-} __attribute__((__packed__));
-
-#define UVC_DT_FORMAT_MJPEG_SIZE			11
-
-/* MJPEG Payload - 3.1.2. MJPEG Video Frame Descriptor */
-struct uvc_frame_mjpeg {
-	__u8  bLength;
-	__u8  bDescriptorType;
-	__u8  bDescriptorSubType;
-	__u8  bFrameIndex;
-	__u8  bmCapabilities;
-	__u16 wWidth;
-	__u16 wHeight;
-	__u32 dwMinBitRate;
-	__u32 dwMaxBitRate;
-	__u32 dwMaxVideoFrameBufferSize;
-	__u32 dwDefaultFrameInterval;
-	__u8  bFrameIntervalType;
-	__u32 dwFrameInterval[];
-} __attribute__((__packed__));
-
-#define UVC_DT_FRAME_MJPEG_SIZE(n)			(26+4*(n))
-
-#define UVC_FRAME_MJPEG(n) \
-	uvc_frame_mjpeg_##n
-
-#define DECLARE_UVC_FRAME_MJPEG(n)			\
-struct UVC_FRAME_MJPEG(n) {				\
-	__u8  bLength;					\
-	__u8  bDescriptorType;				\
-	__u8  bDescriptorSubType;			\
-	__u8  bFrameIndex;				\
-	__u8  bmCapabilities;				\
-	__u16 wWidth;					\
-	__u16 wHeight;					\
-	__u32 dwMinBitRate;				\
-	__u32 dwMaxBitRate;				\
-	__u32 dwMaxVideoFrameBufferSize;		\
-	__u32 dwDefaultFrameInterval;			\
-	__u8  bFrameIntervalType;			\
-	__u32 dwFrameInterval[n];			\
-} __attribute__ ((packed))
-
-#endif /* __LINUX_USB_VIDEO_H */
-
diff --git a/ANDROID_3.4.5/include/linux/usb/wusb-wa.h b/ANDROID_3.4.5/include/linux/usb/wusb-wa.h
deleted file mode 100644
index f9dec37f..00000000
--- a/ANDROID_3.4.5/include/linux/usb/wusb-wa.h
+++ /dev/null
@@ -1,272 +0,0 @@
-/*
- * Wireless USB Wire Adapter constants and structures.
- *
- * Copyright (C) 2005-2006 Intel Corporation.
- * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version
- * 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA.
- *
- *
- * FIXME: docs
- * FIXME: organize properly, group logically
- *
- * All the event structures are defined in uwb/spec.h, as they are
- * common to the WHCI and WUSB radio control interfaces.
- *
- * References:
- *   [WUSB] Wireless Universal Serial Bus Specification, revision 1.0, ch8
- */
-#ifndef __LINUX_USB_WUSB_WA_H
-#define __LINUX_USB_WUSB_WA_H
-
-/**
- * Radio Command Request for the Radio Control Interface
- *
- * Radio Control Interface command and event codes are the same as
- * WHCI, and listed in include/linux/uwb.h:UWB_RC_{CMD,EVT}_*
- */
-enum {
-	WA_EXEC_RC_CMD = 40,	/* Radio Control command Request */
-};
-
-/* Wireless Adapter Requests ([WUSB] table 8-51) */
-enum {
-	WUSB_REQ_ADD_MMC_IE     = 20,
-	WUSB_REQ_REMOVE_MMC_IE  = 21,
-	WUSB_REQ_SET_NUM_DNTS   = 22,
-	WUSB_REQ_SET_CLUSTER_ID = 23,
-	WUSB_REQ_SET_DEV_INFO   = 24,
-	WUSB_REQ_GET_TIME       = 25,
-	WUSB_REQ_SET_STREAM_IDX = 26,
-	WUSB_REQ_SET_WUSB_MAS   = 27,
-	WUSB_REQ_CHAN_STOP      = 28,
-};
-
-
-/* Wireless Adapter WUSB Channel Time types ([WUSB] table 8-52) */
-enum {
-	WUSB_TIME_ADJ   = 0,
-	WUSB_TIME_BPST  = 1,
-	WUSB_TIME_WUSB  = 2,
-};
-
-enum {
-	WA_ENABLE = 0x01,
-	WA_RESET = 0x02,
-	RPIPE_PAUSE = 0x1,
-};
-
-/* Responses from Get Status request ([WUSB] section 8.3.1.6) */
-enum {
-	WA_STATUS_ENABLED = 0x01,
-	WA_STATUS_RESETTING = 0x02
-};
-
-enum rpipe_crs {
-	RPIPE_CRS_CTL = 0x01,
-	RPIPE_CRS_ISO = 0x02,
-	RPIPE_CRS_BULK = 0x04,
-	RPIPE_CRS_INTR = 0x08
-};
-
-/**
- * RPipe descriptor ([WUSB] section 8.5.2.11)
- *
- * FIXME: explain rpipes
- */
-struct usb_rpipe_descriptor {
-	u8	bLength;
-	u8	bDescriptorType;
-	__le16  wRPipeIndex;
-	__le16	wRequests;
-	__le16	wBlocks;		/* rw if 0 */
-	__le16	wMaxPacketSize;		/* rw? */
-	u8	bHSHubAddress;		/* reserved: 0 */
-	u8	bHSHubPort;		/* ??? FIXME ??? */
-	u8	bSpeed;			/* rw: xfer rate 'enum uwb_phy_rate' */
-	u8	bDeviceAddress;		/* rw: Target device address */
-	u8	bEndpointAddress;	/* rw: Target EP address */
-	u8	bDataSequence;		/* ro: Current Data sequence */
-	__le32	dwCurrentWindow;	/* ro */
-	u8	bMaxDataSequence;	/* ro?: max supported seq */
-	u8	bInterval;		/* rw:  */
-	u8	bOverTheAirInterval;	/* rw:  */
-	u8	bmAttribute;		/* ro?  */
-	u8	bmCharacteristics;	/* ro? enum rpipe_attr, supported xsactions */
-	u8	bmRetryOptions;		/* rw? */
-	__le16	wNumTransactionErrors;	/* rw */
-} __attribute__ ((packed));
-
-/**
- * Wire Adapter Notification types ([WUSB] sections 8.4.5 & 8.5.4)
- *
- * These are the notifications coming on the notification endpoint of
- * an HWA and a DWA.
- */
-enum wa_notif_type {
-	DWA_NOTIF_RWAKE = 0x91,
-	DWA_NOTIF_PORTSTATUS = 0x92,
-	WA_NOTIF_TRANSFER = 0x93,
-	HWA_NOTIF_BPST_ADJ = 0x94,
-	HWA_NOTIF_DN = 0x95,
-};
-
-/**
- * Wire Adapter notification header
- *
- * Notifications coming from a wire adapter use a common header
- * defined in [WUSB] sections 8.4.5 & 8.5.4.
- */
-struct wa_notif_hdr {
-	u8 bLength;
-	u8 bNotifyType;			/* enum wa_notif_type */
-} __attribute__((packed));
-
-/**
- * HWA DN Received notification [(WUSB] section 8.5.4.2)
- *
- * The DNData is specified in WUSB1.0[7.6]. For each device
- * notification we received, we just need to dispatch it.
- *
- * @dndata:  this is really an array of notifications, but all start
- *           with the same header.
- */
-struct hwa_notif_dn {
-	struct wa_notif_hdr hdr;
-	u8 bSourceDeviceAddr;		/* from errata 2005/07 */
-	u8 bmAttributes;
-	struct wusb_dn_hdr dndata[];
-} __attribute__((packed));
-
-/* [WUSB] section 8.3.3 */
-enum wa_xfer_type {
-	WA_XFER_TYPE_CTL = 0x80,
-	WA_XFER_TYPE_BI = 0x81,		/* bulk/interrupt */
-	WA_XFER_TYPE_ISO = 0x82,
-	WA_XFER_RESULT = 0x83,
-	WA_XFER_ABORT = 0x84,
-};
-
-/* [WUSB] section 8.3.3 */
-struct wa_xfer_hdr {
-	u8 bLength;			/* 0x18 */
-	u8 bRequestType;		/* 0x80 WA_REQUEST_TYPE_CTL */
-	__le16 wRPipe;			/* RPipe index */
-	__le32 dwTransferID;		/* Host-assigned ID */
-	__le32 dwTransferLength;	/* Length of data to xfer */
-	u8 bTransferSegment;
-} __attribute__((packed));
-
-struct wa_xfer_ctl {
-	struct wa_xfer_hdr hdr;
-	u8 bmAttribute;
-	__le16 wReserved;
-	struct usb_ctrlrequest baSetupData;
-} __attribute__((packed));
-
-struct wa_xfer_bi {
-	struct wa_xfer_hdr hdr;
-	u8 bReserved;
-	__le16 wReserved;
-} __attribute__((packed));
-
-struct wa_xfer_hwaiso {
-	struct wa_xfer_hdr hdr;
-	u8 bReserved;
-	__le16 wPresentationTime;
-	__le32 dwNumOfPackets;
-	/* FIXME: u8 pktdata[]? */
-} __attribute__((packed));
-
-/* [WUSB] section 8.3.3.5 */
-struct wa_xfer_abort {
-	u8 bLength;
-	u8 bRequestType;
-	__le16 wRPipe;			/* RPipe index */
-	__le32 dwTransferID;		/* Host-assigned ID */
-} __attribute__((packed));
-
-/**
- * WA Transfer Complete notification ([WUSB] section 8.3.3.3)
- *
- */
-struct wa_notif_xfer {
-	struct wa_notif_hdr hdr;
-	u8 bEndpoint;
-	u8 Reserved;
-} __attribute__((packed));
-
-/** Transfer result basic codes [WUSB] table 8-15 */
-enum {
-	WA_XFER_STATUS_SUCCESS,
-	WA_XFER_STATUS_HALTED,
-	WA_XFER_STATUS_DATA_BUFFER_ERROR,
-	WA_XFER_STATUS_BABBLE,
-	WA_XFER_RESERVED,
-	WA_XFER_STATUS_NOT_FOUND,
-	WA_XFER_STATUS_INSUFFICIENT_RESOURCE,
-	WA_XFER_STATUS_TRANSACTION_ERROR,
-	WA_XFER_STATUS_ABORTED,
-	WA_XFER_STATUS_RPIPE_NOT_READY,
-	WA_XFER_INVALID_FORMAT,
-	WA_XFER_UNEXPECTED_SEGMENT_NUMBER,
-	WA_XFER_STATUS_RPIPE_TYPE_MISMATCH,
-};
-
-/** [WUSB] section 8.3.3.4 */
-struct wa_xfer_result {
-	struct wa_notif_hdr hdr;
-	__le32 dwTransferID;
-	__le32 dwTransferLength;
-	u8     bTransferSegment;
-	u8     bTransferStatus;
-	__le32 dwNumOfPackets;
-} __attribute__((packed));
-
-/**
- * Wire Adapter Class Descriptor ([WUSB] section 8.5.2.7).
- *
- * NOTE: u16 fields are read Little Endian from the hardware.
- *
- * @bNumPorts is the original max number of devices that the host can
- *            connect; we might chop this so the stack can handle
- *            it. In case you need to access it, use wusbhc->ports_max
- *            if it is a Wireless USB WA.
- */
-struct usb_wa_descriptor {
-	u8	bLength;
-	u8	bDescriptorType;
-	u16	bcdWAVersion;
-	u8	bNumPorts;		/* don't use!! */
-	u8	bmAttributes;		/* Reserved == 0 */
-	u16	wNumRPipes;
-	u16	wRPipeMaxBlock;
-	u8	bRPipeBlockSize;
-	u8	bPwrOn2PwrGood;
-	u8	bNumMMCIEs;
-	u8	DeviceRemovable;	/* FIXME: in DWA this is up to 16 bytes */
-} __attribute__((packed));
-
-/**
- * HWA Device Information Buffer (WUSB1.0[T8.54])
- */
-struct hwa_dev_info {
-	u8	bmDeviceAvailability[32];       /* FIXME: ignored for now */
-	u8	bDeviceAddress;
-	__le16	wPHYRates;
-	u8	bmDeviceAttribute;
-} __attribute__((packed));
-
-#endif /* #ifndef __LINUX_USB_WUSB_WA_H */
diff --git a/ANDROID_3.4.5/include/linux/usb/wusb.h b/ANDROID_3.4.5/include/linux/usb/wusb.h
deleted file mode 100644
index 0c4d4ca3..00000000
--- a/ANDROID_3.4.5/include/linux/usb/wusb.h
+++ /dev/null
@@ -1,375 +0,0 @@
-/*
- * Wireless USB Standard Definitions
- * Event Size Tables
- *
- * Copyright (C) 2005-2006 Intel Corporation
- * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version
- * 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA.
- *
- *
- * FIXME: docs
- * FIXME: organize properly, group logically
- *
- * All the event structures are defined in uwb/spec.h, as they are
- * common to the WHCI and WUSB radio control interfaces.
- */
-
-#ifndef __WUSB_H__
-#define __WUSB_H__
-
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/uwb/spec.h>
-#include <linux/usb/ch9.h>
-#include <linux/param.h>
-
-/**
- * WUSB Information Element header
- *
- * I don't know why, they decided to make it different to the MBOA MAC
- * IE Header; beats me.
- */
-struct wuie_hdr {
-	u8 bLength;
-	u8 bIEIdentifier;
-} __attribute__((packed));
-
-enum {
-	WUIE_ID_WCTA = 0x80,
-	WUIE_ID_CONNECTACK,
-	WUIE_ID_HOST_INFO,
-	WUIE_ID_CHANGE_ANNOUNCE,
-	WUIE_ID_DEVICE_DISCONNECT,
-	WUIE_ID_HOST_DISCONNECT,
-	WUIE_ID_KEEP_ALIVE = 0x89,
-	WUIE_ID_ISOCH_DISCARD,
-	WUIE_ID_RESET_DEVICE,
-};
-
-/**
- * Maximum number of array elements in a WUSB IE.
- *
- * WUSB1.0[7.5 before table 7-38] says that in WUSB IEs that
- * are "arrays" have to limited to 4 elements. So we define it
- * like that to ease up and submit only the neeed size.
- */
-#define WUIE_ELT_MAX 4
-
-/**
- * Wrapper for the data that defines a CHID, a CDID or a CK
- *
- * WUSB defines that CHIDs, CDIDs and CKs are a 16 byte string of
- * data. In order to avoid confusion and enforce types, we wrap it.
- *
- * Make it packed, as we use it in some hw definitions.
- */
-struct wusb_ckhdid {
-	u8 data[16];
-} __attribute__((packed));
-
-static const struct wusb_ckhdid wusb_ckhdid_zero = { .data = { 0 } };
-
-#define WUSB_CKHDID_STRSIZE (3 * sizeof(struct wusb_ckhdid) + 1)
-
-/**
- * WUSB IE: Host Information (WUSB1.0[7.5.2])
- *
- * Used to provide information about the host to the Wireless USB
- * devices in range (CHID can be used as an ASCII string).
- */
-struct wuie_host_info {
-	struct wuie_hdr hdr;
-	__le16 attributes;
-	struct wusb_ckhdid CHID;
-} __attribute__((packed));
-
-/**
- * WUSB IE: Connect Ack (WUSB1.0[7.5.1])
- *
- * Used to acknowledge device connect requests. See note for
- * WUIE_ELT_MAX.
- */
-struct wuie_connect_ack {
-	struct wuie_hdr hdr;
-	struct {
-		struct wusb_ckhdid CDID;
-		u8 bDeviceAddress;	/* 0 means unused */
-		u8 bReserved;
-	} blk[WUIE_ELT_MAX];
-} __attribute__((packed));
-
-/**
- * WUSB IE Host Information Element, Connect Availability
- *
- * WUSB1.0[7.5.2], bmAttributes description
- */
-enum {
-	WUIE_HI_CAP_RECONNECT = 0,
-	WUIE_HI_CAP_LIMITED,
-	WUIE_HI_CAP_RESERVED,
-	WUIE_HI_CAP_ALL,
-};
-
-/**
- * WUSB IE: Channel Stop (WUSB1.0[7.5.8])
- *
- * Tells devices the host is going to stop sending MMCs and will disappear.
- */
-struct wuie_channel_stop {
-	struct wuie_hdr hdr;
-	u8 attributes;
-	u8 timestamp[3];
-} __attribute__((packed));
-
-/**
- * WUSB IE: Keepalive (WUSB1.0[7.5.9])
- *
- * Ask device(s) to send keepalives.
- */
-struct wuie_keep_alive {
-	struct wuie_hdr hdr;
-	u8 bDeviceAddress[WUIE_ELT_MAX];
-} __attribute__((packed));
-
-/**
- * WUSB IE: Reset device (WUSB1.0[7.5.11])
- *
- * Tell device to reset; in all truth, we can fit 4 CDIDs, but we only
- * use it for one at the time...
- *
- * In any case, this request is a wee bit silly: why don't they target
- * by address??
- */
-struct wuie_reset {
-	struct wuie_hdr hdr;
-	struct wusb_ckhdid CDID;
-} __attribute__((packed));
-
-/**
- * WUSB IE: Disconnect device (WUSB1.0[7.5.11])
- *
- * Tell device to disconnect; we can fit 4 addresses, but we only use
- * it for one at the time...
- */
-struct wuie_disconnect {
-	struct wuie_hdr hdr;
-	u8 bDeviceAddress;
-	u8 padding;
-} __attribute__((packed));
-
-/**
- * WUSB IE: Host disconnect ([WUSB] section 7.5.5)
- *
- * Tells all connected devices to disconnect.
- */
-struct wuie_host_disconnect {
-	struct wuie_hdr hdr;
-} __attribute__((packed));
-
-/**
- * WUSB Device Notification header (WUSB1.0[7.6])
- */
-struct wusb_dn_hdr {
-	u8 bType;
-	u8 notifdata[];
-} __attribute__((packed));
-
-/** Device Notification codes (WUSB1.0[Table 7-54]) */
-enum WUSB_DN {
-	WUSB_DN_CONNECT = 0x01,
-	WUSB_DN_DISCONNECT = 0x02,
-	WUSB_DN_EPRDY = 0x03,
-	WUSB_DN_MASAVAILCHANGED = 0x04,
-	WUSB_DN_RWAKE = 0x05,
-	WUSB_DN_SLEEP = 0x06,
-	WUSB_DN_ALIVE = 0x07,
-};
-
-/** WUSB Device Notification Connect */
-struct wusb_dn_connect {
-	struct wusb_dn_hdr hdr;
-	__le16 attributes;
-	struct wusb_ckhdid CDID;
-} __attribute__((packed));
-
-static inline int wusb_dn_connect_prev_dev_addr(const struct wusb_dn_connect *dn)
-{
-	return le16_to_cpu(dn->attributes) & 0xff;
-}
-
-static inline int wusb_dn_connect_new_connection(const struct wusb_dn_connect *dn)
-{
-	return (le16_to_cpu(dn->attributes) >> 8) & 0x1;
-}
-
-static inline int wusb_dn_connect_beacon_behavior(const struct wusb_dn_connect *dn)
-{
-	return (le16_to_cpu(dn->attributes) >> 9) & 0x03;
-}
-
-/** Device is alive (aka: pong) (WUSB1.0[7.6.7]) */
-struct wusb_dn_alive {
-	struct wusb_dn_hdr hdr;
-} __attribute__((packed));
-
-/** Device is disconnecting (WUSB1.0[7.6.2]) */
-struct wusb_dn_disconnect {
-	struct wusb_dn_hdr hdr;
-} __attribute__((packed));
-
-/* General constants */
-enum {
-	WUSB_TRUST_TIMEOUT_MS = 4000,	/* [WUSB] section 4.15.1 */
-};
-
-static inline size_t ckhdid_printf(char *pr_ckhdid, size_t size,
-				   const struct wusb_ckhdid *ckhdid)
-{
-	return scnprintf(pr_ckhdid, size,
-			 "%02hx %02hx %02hx %02hx %02hx %02hx %02hx %02hx "
-			 "%02hx %02hx %02hx %02hx %02hx %02hx %02hx %02hx",
-			 ckhdid->data[0],  ckhdid->data[1],
-			 ckhdid->data[2],  ckhdid->data[3],
-			 ckhdid->data[4],  ckhdid->data[5],
-			 ckhdid->data[6],  ckhdid->data[7],
-			 ckhdid->data[8],  ckhdid->data[9],
-			 ckhdid->data[10], ckhdid->data[11],
-			 ckhdid->data[12], ckhdid->data[13],
-			 ckhdid->data[14], ckhdid->data[15]);
-}
-
-/*
- * WUSB Crypto stuff (WUSB1.0[6])
- */
-
-extern const char *wusb_et_name(u8);
-
-/**
- * WUSB key index WUSB1.0[7.3.2.4], for usage when setting keys for
- * the host or the device.
- */
-static inline u8 wusb_key_index(int index, int type, int originator)
-{
-	return (originator << 6) | (type << 4) | index;
-}
-
-#define WUSB_KEY_INDEX_TYPE_PTK			0 /* for HWA only */
-#define WUSB_KEY_INDEX_TYPE_ASSOC		1
-#define WUSB_KEY_INDEX_TYPE_GTK			2
-#define WUSB_KEY_INDEX_ORIGINATOR_HOST		0
-#define WUSB_KEY_INDEX_ORIGINATOR_DEVICE	1
-
-/* A CCM Nonce, defined in WUSB1.0[6.4.1] */
-struct aes_ccm_nonce {
-	u8 sfn[6];              /* Little Endian */
-	u8 tkid[3];             /* LE */
-	struct uwb_dev_addr dest_addr;
-	struct uwb_dev_addr src_addr;
-} __attribute__((packed));
-
-/* A CCM operation label, defined on WUSB1.0[6.5.x] */
-struct aes_ccm_label {
-	u8 data[14];
-} __attribute__((packed));
-
-/*
- * Input to the key derivation sequence defined in
- * WUSB1.0[6.5.1]. Rest of the data is in the CCM Nonce passed to the
- * PRF function.
- */
-struct wusb_keydvt_in {
-	u8 hnonce[16];
-	u8 dnonce[16];
-} __attribute__((packed));
-
-/*
- * Output from the key derivation sequence defined in
- * WUSB1.0[6.5.1].
- */
-struct wusb_keydvt_out {
-	u8 kck[16];
-	u8 ptk[16];
-} __attribute__((packed));
-
-/* Pseudo Random Function WUSB1.0[6.5] */
-extern int wusb_crypto_init(void);
-extern void wusb_crypto_exit(void);
-extern ssize_t wusb_prf(void *out, size_t out_size,
-			const u8 key[16], const struct aes_ccm_nonce *_n,
-			const struct aes_ccm_label *a,
-			const void *b, size_t blen, size_t len);
-
-static inline int wusb_prf_64(void *out, size_t out_size, const u8 key[16],
-			      const struct aes_ccm_nonce *n,
-			      const struct aes_ccm_label *a,
-			      const void *b, size_t blen)
-{
-	return wusb_prf(out, out_size, key, n, a, b, blen, 64);
-}
-
-static inline int wusb_prf_128(void *out, size_t out_size, const u8 key[16],
-			       const struct aes_ccm_nonce *n,
-			       const struct aes_ccm_label *a,
-			       const void *b, size_t blen)
-{
-	return wusb_prf(out, out_size, key, n, a, b, blen, 128);
-}
-
-static inline int wusb_prf_256(void *out, size_t out_size, const u8 key[16],
-			       const struct aes_ccm_nonce *n,
-			       const struct aes_ccm_label *a,
-			       const void *b, size_t blen)
-{
-	return wusb_prf(out, out_size, key, n, a, b, blen, 256);
-}
-
-/* Key derivation WUSB1.0[6.5.1] */
-static inline int wusb_key_derive(struct wusb_keydvt_out *keydvt_out,
-				  const u8 key[16],
-				  const struct aes_ccm_nonce *n,
-				  const struct wusb_keydvt_in *keydvt_in)
-{
-	const struct aes_ccm_label a = { .data = "Pair-wise keys" };
-	return wusb_prf_256(keydvt_out, sizeof(*keydvt_out), key, n, &a,
-			    keydvt_in, sizeof(*keydvt_in));
-}
-
-/*
- * Out-of-band MIC Generation WUSB1.0[6.5.2]
- *
- * Compute the MIC over @key, @n and @hs and place it in @mic_out.
- *
- * @mic_out:  Where to place the 8 byte MIC tag
- * @key:      KCK from the derivation process
- * @n:        CCM nonce, n->sfn == 0, TKID as established in the
- *            process.
- * @hs:       Handshake struct for phase 2 of the 4-way.
- *            hs->bStatus and hs->bReserved are zero.
- *            hs->bMessageNumber is 2 (WUSB1.0[7.3.2.5.2]
- *            hs->dest_addr is the device's USB address padded with 0
- *            hs->src_addr is the hosts's UWB device address
- *            hs->mic is ignored (as we compute that value).
- */
-static inline int wusb_oob_mic(u8 mic_out[8], const u8 key[16],
-			       const struct aes_ccm_nonce *n,
-			       const struct usb_handshake *hs)
-{
-	const struct aes_ccm_label a = { .data = "out-of-bandMIC" };
-	return wusb_prf_64(mic_out, 8, key, n, &a,
-			   hs, sizeof(*hs) - sizeof(hs->MIC));
-}
-
-#endif /* #ifndef __WUSB_H__ */
diff --git a/ANDROID_3.4.5/include/linux/usb_usual.h b/ANDROID_3.4.5/include/linux/usb_usual.h
deleted file mode 100644
index 17df3600..00000000
--- a/ANDROID_3.4.5/include/linux/usb_usual.h
+++ /dev/null
@@ -1,102 +0,0 @@
-/*
- * Interface to the libusual.
- *
- * Copyright (c) 2005 Pete Zaitcev <zaitcev@redhat.com>
- * Copyright (c) 1999-2002 Matthew Dharm (mdharm-usb@one-eyed-alien.net)
- * Copyright (c) 1999 Michael Gee (michael@linuxspecific.com)
- */
-
-#ifndef __LINUX_USB_USUAL_H
-#define __LINUX_USB_USUAL_H
-
-
-/* We should do this for cleanliness... But other usb_foo.h do not do this. */
-/* #include <linux/usb.h> */
-
-/*
- * The flags field, which we store in usb_device_id.driver_info.
- * It is compatible with the old usb-storage flags in lower 24 bits.
- */
-
-/*
- * Static flag definitions.  We use this roundabout technique so that the
- * proc_info() routine can automatically display a message for each flag.
- */
-#define US_DO_ALL_FLAGS						\
-	US_FLAG(SINGLE_LUN,	0x00000001)			\
-		/* allow access to only LUN 0 */		\
-	US_FLAG(NEED_OVERRIDE,	0x00000002)			\
-		/* unusual_devs entry is necessary */		\
-	US_FLAG(SCM_MULT_TARG,	0x00000004)			\
-		/* supports multiple targets */			\
-	US_FLAG(FIX_INQUIRY,	0x00000008)			\
-		/* INQUIRY response needs faking */		\
-	US_FLAG(FIX_CAPACITY,	0x00000010)			\
-		/* READ CAPACITY response too big */		\
-	US_FLAG(IGNORE_RESIDUE,	0x00000020)			\
-		/* reported residue is wrong */			\
-	US_FLAG(BULK32,		0x00000040)			\
-		/* Uses 32-byte CBW length */			\
-	US_FLAG(NOT_LOCKABLE,	0x00000080)			\
-		/* PREVENT/ALLOW not supported */		\
-	US_FLAG(GO_SLOW,	0x00000100)			\
-		/* Need delay after Command phase */		\
-	US_FLAG(NO_WP_DETECT,	0x00000200)			\
-		/* Don't check for write-protect */		\
-	US_FLAG(MAX_SECTORS_64,	0x00000400)			\
-		/* Sets max_sectors to 64    */			\
-	US_FLAG(IGNORE_DEVICE,	0x00000800)			\
-		/* Don't claim device */			\
-	US_FLAG(CAPACITY_HEURISTICS,	0x00001000)		\
-		/* sometimes sizes is too big */		\
-	US_FLAG(MAX_SECTORS_MIN,0x00002000)			\
-		/* Sets max_sectors to arch min */		\
-	US_FLAG(BULK_IGNORE_TAG,0x00004000)			\
-		/* Ignore tag mismatch in bulk operations */    \
-	US_FLAG(SANE_SENSE,     0x00008000)			\
-		/* Sane Sense (> 18 bytes) */			\
-	US_FLAG(CAPACITY_OK,	0x00010000)			\
-		/* READ CAPACITY response is correct */		\
-	US_FLAG(BAD_SENSE,	0x00020000)			\
-		/* Bad Sense (never more than 18 bytes) */	\
-	US_FLAG(NO_READ_DISC_INFO,	0x00040000)		\
-		/* cannot handle READ_DISC_INFO */		\
-	US_FLAG(NO_READ_CAPACITY_16,	0x00080000)		\
-		/* cannot handle READ_CAPACITY_16 */		\
-	US_FLAG(INITIAL_READ10,	0x00100000)			\
-		/* Initial READ(10) (and others) must be retried */
-
-#define US_FLAG(name, value)	US_FL_##name = value ,
-enum { US_DO_ALL_FLAGS };
-#undef US_FLAG
-
-/*
- * The bias field for libusual and friends.
- */
-#define USB_US_TYPE_NONE   0
-#define USB_US_TYPE_STOR   1		/* usb-storage */
-#define USB_US_TYPE_UB     2		/* ub */
-
-#define USB_US_TYPE(flags) 		(((flags) >> 24) & 0xFF)
-#define USB_US_ORIG_FLAGS(flags)	((flags) & 0x00FFFFFF)
-
-#include <linux/usb/storage.h>
-
-/*
- */
-extern int usb_usual_ignore_device(struct usb_interface *intf);
-extern struct usb_device_id usb_storage_usb_ids[];
-
-#ifdef CONFIG_USB_LIBUSUAL
-
-extern void usb_usual_set_present(int type);
-extern void usb_usual_clear_present(int type);
-extern int usb_usual_check_type(const struct usb_device_id *, int type);
-#else
-
-#define usb_usual_set_present(t)	do { } while(0)
-#define usb_usual_clear_present(t)	do { } while(0)
-#define usb_usual_check_type(id, t)	(0)
-#endif /* CONFIG_USB_LIBUSUAL */
-
-#endif /* __LINUX_USB_USUAL_H */
diff --git a/ANDROID_3.4.5/include/linux/usbdevice_fs.h b/ANDROID_3.4.5/include/linux/usbdevice_fs.h
deleted file mode 100644
index 15591d2e..00000000
--- a/ANDROID_3.4.5/include/linux/usbdevice_fs.h
+++ /dev/null
@@ -1,207 +0,0 @@
-/*****************************************************************************/
-
-/*
- *	usbdevice_fs.h  --  USB device file system.
- *
- *	Copyright (C) 2000
- *          Thomas Sailer (sailer@ife.ee.ethz.ch)
- *
- *	This program is free software; you can redistribute it and/or modify
- *	it under the terms of the GNU General Public License as published by
- *	the Free Software Foundation; either version 2 of the License, or
- *	(at your option) any later version.
- *
- *	This program is distributed in the hope that it will be useful,
- *	but WITHOUT ANY WARRANTY; without even the implied warranty of
- *	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *	GNU General Public License for more details.
- *
- *	You should have received a copy of the GNU General Public License
- *	along with this program; if not, write to the Free Software
- *	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- *  History:
- *   0.1  04.01.2000  Created
- */
-
-/*****************************************************************************/
-
-#ifndef _LINUX_USBDEVICE_FS_H
-#define _LINUX_USBDEVICE_FS_H
-
-#include <linux/types.h>
-#include <linux/magic.h>
-
-/* --------------------------------------------------------------------- */
-
-/* usbdevfs ioctl codes */
-
-struct usbdevfs_ctrltransfer {
-	__u8 bRequestType;
-	__u8 bRequest;
-	__u16 wValue;
-	__u16 wIndex;
-	__u16 wLength;
-	__u32 timeout;  /* in milliseconds */
- 	void __user *data;
-};
-
-struct usbdevfs_bulktransfer {
-	unsigned int ep;
-	unsigned int len;
-	unsigned int timeout; /* in milliseconds */
-	void __user *data;
-};
-
-struct usbdevfs_setinterface {
-	unsigned int interface;
-	unsigned int altsetting;
-};
-
-struct usbdevfs_disconnectsignal {
-	unsigned int signr;
-	void __user *context;
-};
-
-#define USBDEVFS_MAXDRIVERNAME 255
-
-struct usbdevfs_getdriver {
-	unsigned int interface;
-	char driver[USBDEVFS_MAXDRIVERNAME + 1];
-};
-
-struct usbdevfs_connectinfo {
-	unsigned int devnum;
-	unsigned char slow;
-};
-
-#define USBDEVFS_URB_SHORT_NOT_OK	0x01
-#define USBDEVFS_URB_ISO_ASAP		0x02
-#define USBDEVFS_URB_BULK_CONTINUATION	0x04
-#define USBDEVFS_URB_NO_FSBR		0x20
-#define USBDEVFS_URB_ZERO_PACKET	0x40
-#define USBDEVFS_URB_NO_INTERRUPT	0x80
-
-#define USBDEVFS_URB_TYPE_ISO		   0
-#define USBDEVFS_URB_TYPE_INTERRUPT	   1
-#define USBDEVFS_URB_TYPE_CONTROL	   2
-#define USBDEVFS_URB_TYPE_BULK		   3
-
-struct usbdevfs_iso_packet_desc {
-	unsigned int length;
-	unsigned int actual_length;
-	unsigned int status;
-};
-
-struct usbdevfs_urb {
-	unsigned char type;
-	unsigned char endpoint;
-	int status;
-	unsigned int flags;
-	void __user *buffer;
-	int buffer_length;
-	int actual_length;
-	int start_frame;
-	int number_of_packets;
-	int error_count;
-	unsigned int signr;	/* signal to be sent on completion,
-				  or 0 if none should be sent. */
-	void __user *usercontext;
-	struct usbdevfs_iso_packet_desc iso_frame_desc[0];
-};
-
-/* ioctls for talking directly to drivers */
-struct usbdevfs_ioctl {
-	int	ifno;		/* interface 0..N ; negative numbers reserved */
-	int	ioctl_code;	/* MUST encode size + direction of data so the
-				 * macros in <asm/ioctl.h> give correct values */
-	void __user *data;	/* param buffer (in, or out) */
-};
-
-/* You can do most things with hubs just through control messages,
- * except find out what device connects to what port. */
-struct usbdevfs_hub_portinfo {
-	char nports;		/* number of downstream ports in this hub */
-	char port [127];	/* e.g. port 3 connects to device 27 */
-};
-
-#ifdef __KERNEL__
-#ifdef CONFIG_COMPAT
-#include <linux/compat.h>
-
-struct usbdevfs_ctrltransfer32 {
-        u8 bRequestType;
-        u8 bRequest;
-        u16 wValue;
-        u16 wIndex;
-        u16 wLength;
-        u32 timeout;  /* in milliseconds */
-        compat_caddr_t data;
-};
-
-struct usbdevfs_bulktransfer32 {
-        compat_uint_t ep;
-        compat_uint_t len;
-        compat_uint_t timeout; /* in milliseconds */
-        compat_caddr_t data;
-};
-
-struct usbdevfs_disconnectsignal32 {
-        compat_int_t signr;
-        compat_caddr_t context;
-};
-
-struct usbdevfs_urb32 {
-	unsigned char type;
-	unsigned char endpoint;
-	compat_int_t status;
-	compat_uint_t flags;
-	compat_caddr_t buffer;
-	compat_int_t buffer_length;
-	compat_int_t actual_length;
-	compat_int_t start_frame;
-	compat_int_t number_of_packets;
-	compat_int_t error_count;
-	compat_uint_t signr;
-	compat_caddr_t usercontext; /* unused */
-	struct usbdevfs_iso_packet_desc iso_frame_desc[0];
-};
-
-struct usbdevfs_ioctl32 {
-	s32 ifno;
-	s32 ioctl_code;
-	compat_caddr_t data;
-};
-#endif
-#endif /* __KERNEL__ */
-
-#define USBDEVFS_CONTROL           _IOWR('U', 0, struct usbdevfs_ctrltransfer)
-#define USBDEVFS_CONTROL32           _IOWR('U', 0, struct usbdevfs_ctrltransfer32)
-#define USBDEVFS_BULK              _IOWR('U', 2, struct usbdevfs_bulktransfer)
-#define USBDEVFS_BULK32              _IOWR('U', 2, struct usbdevfs_bulktransfer32)
-#define USBDEVFS_RESETEP           _IOR('U', 3, unsigned int)
-#define USBDEVFS_SETINTERFACE      _IOR('U', 4, struct usbdevfs_setinterface)
-#define USBDEVFS_SETCONFIGURATION  _IOR('U', 5, unsigned int)
-#define USBDEVFS_GETDRIVER         _IOW('U', 8, struct usbdevfs_getdriver)
-#define USBDEVFS_SUBMITURB         _IOR('U', 10, struct usbdevfs_urb)
-#define USBDEVFS_SUBMITURB32       _IOR('U', 10, struct usbdevfs_urb32)
-#define USBDEVFS_DISCARDURB        _IO('U', 11)
-#define USBDEVFS_REAPURB           _IOW('U', 12, void *)
-#define USBDEVFS_REAPURB32         _IOW('U', 12, __u32)
-#define USBDEVFS_REAPURBNDELAY     _IOW('U', 13, void *)
-#define USBDEVFS_REAPURBNDELAY32   _IOW('U', 13, __u32)
-#define USBDEVFS_DISCSIGNAL        _IOR('U', 14, struct usbdevfs_disconnectsignal)
-#define USBDEVFS_DISCSIGNAL32      _IOR('U', 14, struct usbdevfs_disconnectsignal32)
-#define USBDEVFS_CLAIMINTERFACE    _IOR('U', 15, unsigned int)
-#define USBDEVFS_RELEASEINTERFACE  _IOR('U', 16, unsigned int)
-#define USBDEVFS_CONNECTINFO       _IOW('U', 17, struct usbdevfs_connectinfo)
-#define USBDEVFS_IOCTL             _IOWR('U', 18, struct usbdevfs_ioctl)
-#define USBDEVFS_IOCTL32           _IOWR('U', 18, struct usbdevfs_ioctl32)
-#define USBDEVFS_HUB_PORTINFO      _IOR('U', 19, struct usbdevfs_hub_portinfo)
-#define USBDEVFS_RESET             _IO('U', 20)
-#define USBDEVFS_CLEAR_HALT        _IOR('U', 21, unsigned int)
-#define USBDEVFS_DISCONNECT        _IO('U', 22)
-#define USBDEVFS_CONNECT           _IO('U', 23)
-#define USBDEVFS_CLAIM_PORT        _IOR('U', 24, unsigned int)
-#define USBDEVFS_RELEASE_PORT      _IOR('U', 25, unsigned int)
-#endif /* _LINUX_USBDEVICE_FS_H */
diff --git a/ANDROID_3.4.5/include/linux/user-return-notifier.h b/ANDROID_3.4.5/include/linux/user-return-notifier.h
deleted file mode 100644
index 9c4a445b..00000000
--- a/ANDROID_3.4.5/include/linux/user-return-notifier.h
+++ /dev/null
@@ -1,49 +0,0 @@
-#ifndef _LINUX_USER_RETURN_NOTIFIER_H
-#define _LINUX_USER_RETURN_NOTIFIER_H
-
-#ifdef CONFIG_USER_RETURN_NOTIFIER
-
-#include <linux/list.h>
-#include <linux/sched.h>
-
-struct user_return_notifier {
-	void (*on_user_return)(struct user_return_notifier *urn);
-	struct hlist_node link;
-};
-
-
-void user_return_notifier_register(struct user_return_notifier *urn);
-void user_return_notifier_unregister(struct user_return_notifier *urn);
-
-static inline void propagate_user_return_notify(struct task_struct *prev,
-						struct task_struct *next)
-{
-	if (test_tsk_thread_flag(prev, TIF_USER_RETURN_NOTIFY)) {
-		clear_tsk_thread_flag(prev, TIF_USER_RETURN_NOTIFY);
-		set_tsk_thread_flag(next, TIF_USER_RETURN_NOTIFY);
-	}
-}
-
-void fire_user_return_notifiers(void);
-
-static inline void clear_user_return_notifier(struct task_struct *p)
-{
-	clear_tsk_thread_flag(p, TIF_USER_RETURN_NOTIFY);
-}
-
-#else
-
-struct user_return_notifier {};
-
-static inline void propagate_user_return_notify(struct task_struct *prev,
-						struct task_struct *next)
-{
-}
-
-static inline void fire_user_return_notifiers(void) {}
-
-static inline void clear_user_return_notifier(struct task_struct *p) {}
-
-#endif
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/user.h b/ANDROID_3.4.5/include/linux/user.h
deleted file mode 100644
index 68daf840..00000000
--- a/ANDROID_3.4.5/include/linux/user.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm/user.h>
diff --git a/ANDROID_3.4.5/include/linux/user_namespace.h b/ANDROID_3.4.5/include/linux/user_namespace.h
deleted file mode 100644
index faf46794..00000000
--- a/ANDROID_3.4.5/include/linux/user_namespace.h
+++ /dev/null
@@ -1,71 +0,0 @@
-#ifndef _LINUX_USER_NAMESPACE_H
-#define _LINUX_USER_NAMESPACE_H
-
-#include <linux/kref.h>
-#include <linux/nsproxy.h>
-#include <linux/sched.h>
-#include <linux/err.h>
-
-#define UIDHASH_BITS	(CONFIG_BASE_SMALL ? 3 : 7)
-#define UIDHASH_SZ	(1 << UIDHASH_BITS)
-
-struct user_namespace {
-	struct kref		kref;
-	struct hlist_head	uidhash_table[UIDHASH_SZ];
-	struct user_struct	*creator;
-	struct work_struct	destroyer;
-};
-
-extern struct user_namespace init_user_ns;
-
-#ifdef CONFIG_USER_NS
-
-static inline struct user_namespace *get_user_ns(struct user_namespace *ns)
-{
-	if (ns)
-		kref_get(&ns->kref);
-	return ns;
-}
-
-extern int create_user_ns(struct cred *new);
-extern void free_user_ns(struct kref *kref);
-
-static inline void put_user_ns(struct user_namespace *ns)
-{
-	if (ns)
-		kref_put(&ns->kref, free_user_ns);
-}
-
-uid_t user_ns_map_uid(struct user_namespace *to, const struct cred *cred, uid_t uid);
-gid_t user_ns_map_gid(struct user_namespace *to, const struct cred *cred, gid_t gid);
-
-#else
-
-static inline struct user_namespace *get_user_ns(struct user_namespace *ns)
-{
-	return &init_user_ns;
-}
-
-static inline int create_user_ns(struct cred *new)
-{
-	return -EINVAL;
-}
-
-static inline void put_user_ns(struct user_namespace *ns)
-{
-}
-
-static inline uid_t user_ns_map_uid(struct user_namespace *to,
-	const struct cred *cred, uid_t uid)
-{
-	return uid;
-}
-static inline gid_t user_ns_map_gid(struct user_namespace *to,
-	const struct cred *cred, gid_t gid)
-{
-	return gid;
-}
-
-#endif
-
-#endif /* _LINUX_USER_H */
diff --git a/ANDROID_3.4.5/include/linux/utime.h b/ANDROID_3.4.5/include/linux/utime.h
deleted file mode 100644
index 5cdf673a..00000000
--- a/ANDROID_3.4.5/include/linux/utime.h
+++ /dev/null
@@ -1,11 +0,0 @@
-#ifndef _LINUX_UTIME_H
-#define _LINUX_UTIME_H
-
-#include <linux/types.h>
-
-struct utimbuf {
-	__kernel_time_t actime;
-	__kernel_time_t modtime;
-};
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/uts.h b/ANDROID_3.4.5/include/linux/uts.h
deleted file mode 100644
index 6ddbd863..00000000
--- a/ANDROID_3.4.5/include/linux/uts.h
+++ /dev/null
@@ -1,19 +0,0 @@
-#ifndef _LINUX_UTS_H
-#define _LINUX_UTS_H
-
-/*
- * Defines for what uname() should return 
- */
-#ifndef UTS_SYSNAME
-#define UTS_SYSNAME "Linux"
-#endif
-
-#ifndef UTS_NODENAME
-#define UTS_NODENAME CONFIG_DEFAULT_HOSTNAME /* set by sethostname() */
-#endif
-
-#ifndef UTS_DOMAINNAME
-#define UTS_DOMAINNAME "(none)"	/* set by setdomainname() */
-#endif
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/utsname.h b/ANDROID_3.4.5/include/linux/utsname.h
deleted file mode 100644
index c714ed75..00000000
--- a/ANDROID_3.4.5/include/linux/utsname.h
+++ /dev/null
@@ -1,113 +0,0 @@
-#ifndef _LINUX_UTSNAME_H
-#define _LINUX_UTSNAME_H
-
-#define __OLD_UTS_LEN 8
-
-struct oldold_utsname {
-	char sysname[9];
-	char nodename[9];
-	char release[9];
-	char version[9];
-	char machine[9];
-};
-
-#define __NEW_UTS_LEN 64
-
-struct old_utsname {
-	char sysname[65];
-	char nodename[65];
-	char release[65];
-	char version[65];
-	char machine[65];
-};
-
-struct new_utsname {
-	char sysname[__NEW_UTS_LEN + 1];
-	char nodename[__NEW_UTS_LEN + 1];
-	char release[__NEW_UTS_LEN + 1];
-	char version[__NEW_UTS_LEN + 1];
-	char machine[__NEW_UTS_LEN + 1];
-	char domainname[__NEW_UTS_LEN + 1];
-};
-
-#ifdef __KERNEL__
-
-#include <linux/sched.h>
-#include <linux/kref.h>
-#include <linux/nsproxy.h>
-#include <linux/err.h>
-
-enum uts_proc {
-	UTS_PROC_OSTYPE,
-	UTS_PROC_OSRELEASE,
-	UTS_PROC_VERSION,
-	UTS_PROC_HOSTNAME,
-	UTS_PROC_DOMAINNAME,
-};
-
-struct user_namespace;
-extern struct user_namespace init_user_ns;
-
-struct uts_namespace {
-	struct kref kref;
-	struct new_utsname name;
-	struct user_namespace *user_ns;
-};
-extern struct uts_namespace init_uts_ns;
-
-#ifdef CONFIG_UTS_NS
-static inline void get_uts_ns(struct uts_namespace *ns)
-{
-	kref_get(&ns->kref);
-}
-
-extern struct uts_namespace *copy_utsname(unsigned long flags,
-					  struct task_struct *tsk);
-extern void free_uts_ns(struct kref *kref);
-
-static inline void put_uts_ns(struct uts_namespace *ns)
-{
-	kref_put(&ns->kref, free_uts_ns);
-}
-#else
-static inline void get_uts_ns(struct uts_namespace *ns)
-{
-}
-
-static inline void put_uts_ns(struct uts_namespace *ns)
-{
-}
-
-static inline struct uts_namespace *copy_utsname(unsigned long flags,
-						 struct task_struct *tsk)
-{
-	if (flags & CLONE_NEWUTS)
-		return ERR_PTR(-EINVAL);
-
-	return tsk->nsproxy->uts_ns;
-}
-#endif
-
-#ifdef CONFIG_PROC_SYSCTL
-extern void uts_proc_notify(enum uts_proc proc);
-#else
-static inline void uts_proc_notify(enum uts_proc proc)
-{
-}
-#endif
-
-static inline struct new_utsname *utsname(void)
-{
-	return &current->nsproxy->uts_ns->name;
-}
-
-static inline struct new_utsname *init_utsname(void)
-{
-	return &init_uts_ns.name;
-}
-
-extern struct rw_semaphore uts_sem;
-
-#endif /* __KERNEL__ */
-
-#endif /* _LINUX_UTSNAME_H */
diff --git a/ANDROID_3.4.5/include/linux/uuid.h b/ANDROID_3.4.5/include/linux/uuid.h
deleted file mode 100644
index 5b7efbfc..00000000
--- a/ANDROID_3.4.5/include/linux/uuid.h
+++ /dev/null
@@ -1,70 +0,0 @@
-/*
- * UUID/GUID definition
- *
- * Copyright (C) 2010, Intel Corp.
- *	Huang Ying <ying.huang@intel.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version
- * 2 as published by the Free Software Foundation;
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef _LINUX_UUID_H_
-#define _LINUX_UUID_H_
-
-#include <linux/types.h>
-#include <linux/string.h>
-
-typedef struct {
-	__u8 b[16];
-} uuid_le;
-
-typedef struct {
-	__u8 b[16];
-} uuid_be;
-
-#define UUID_LE(a, b, c, d0, d1, d2, d3, d4, d5, d6, d7)		\
-((uuid_le)								\
-{{ (a) & 0xff, ((a) >> 8) & 0xff, ((a) >> 16) & 0xff, ((a) >> 24) & 0xff, \
-   (b) & 0xff, ((b) >> 8) & 0xff,					\
-   (c) & 0xff, ((c) >> 8) & 0xff,					\
-   (d0), (d1), (d2), (d3), (d4), (d5), (d6), (d7) }})
-
-#define UUID_BE(a, b, c, d0, d1, d2, d3, d4, d5, d6, d7)		\
-((uuid_be)								\
-{{ ((a) >> 24) & 0xff, ((a) >> 16) & 0xff, ((a) >> 8) & 0xff, (a) & 0xff, \
-   ((b) >> 8) & 0xff, (b) & 0xff,					\
-   ((c) >> 8) & 0xff, (c) & 0xff,					\
-   (d0), (d1), (d2), (d3), (d4), (d5), (d6), (d7) }})
-
-#define NULL_UUID_LE							\
-	UUID_LE(0x00000000, 0x0000, 0x0000, 0x00, 0x00, 0x00, 0x00,	\
-		0x00, 0x00, 0x00, 0x00)
-
-#define NULL_UUID_BE							\
-	UUID_BE(0x00000000, 0x0000, 0x0000, 0x00, 0x00, 0x00, 0x00,	\
-		0x00, 0x00, 0x00, 0x00)
-
-static inline int uuid_le_cmp(const uuid_le u1, const uuid_le u2)
-{
-	return memcmp(&u1, &u2, sizeof(uuid_le));
-}
-
-static inline int uuid_be_cmp(const uuid_be u1, const uuid_be u2)
-{
-	return memcmp(&u1, &u2, sizeof(uuid_be));
-}
-
-extern void uuid_le_gen(uuid_le *u);
-extern void uuid_be_gen(uuid_be *u);
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/uvcvideo.h b/ANDROID_3.4.5/include/linux/uvcvideo.h
deleted file mode 100644
index f46a53f0..00000000
--- a/ANDROID_3.4.5/include/linux/uvcvideo.h
+++ /dev/null
@@ -1,69 +0,0 @@
-#ifndef __LINUX_UVCVIDEO_H_
-#define __LINUX_UVCVIDEO_H_
-
-#include <linux/ioctl.h>
-#include <linux/types.h>
-
-/*
- * Dynamic controls
- */
-
-/* Data types for UVC control data */
-#define UVC_CTRL_DATA_TYPE_RAW		0
-#define UVC_CTRL_DATA_TYPE_SIGNED	1
-#define UVC_CTRL_DATA_TYPE_UNSIGNED	2
-#define UVC_CTRL_DATA_TYPE_BOOLEAN	3
-#define UVC_CTRL_DATA_TYPE_ENUM		4
-#define UVC_CTRL_DATA_TYPE_BITMASK	5
-
-/* Control flags */
-#define UVC_CTRL_FLAG_SET_CUR		(1 << 0)
-#define UVC_CTRL_FLAG_GET_CUR		(1 << 1)
-#define UVC_CTRL_FLAG_GET_MIN		(1 << 2)
-#define UVC_CTRL_FLAG_GET_MAX		(1 << 3)
-#define UVC_CTRL_FLAG_GET_RES		(1 << 4)
-#define UVC_CTRL_FLAG_GET_DEF		(1 << 5)
-/* Control should be saved at suspend and restored at resume. */
-#define UVC_CTRL_FLAG_RESTORE		(1 << 6)
-/* Control can be updated by the camera. */
-#define UVC_CTRL_FLAG_AUTO_UPDATE	(1 << 7)
-
-#define UVC_CTRL_FLAG_GET_RANGE \
-	(UVC_CTRL_FLAG_GET_CUR | UVC_CTRL_FLAG_GET_MIN | \
-	 UVC_CTRL_FLAG_GET_MAX | UVC_CTRL_FLAG_GET_RES | \
-	 UVC_CTRL_FLAG_GET_DEF)
-
-struct uvc_menu_info {
-	__u32 value;
-	__u8 name[32];
-};
-
-struct uvc_xu_control_mapping {
-	__u32 id;
-	__u8 name[32];
-	__u8 entity[16];
-	__u8 selector;
-
-	__u8 size;
-	__u8 offset;
-	__u32 v4l2_type;
-	__u32 data_type;
-
-	struct uvc_menu_info __user *menu_info;
-	__u32 menu_count;
-
-	__u32 reserved[4];
-};
-
-struct uvc_xu_control_query {
-	__u8 unit;
-	__u8 selector;
-	__u8 query;
-	__u16 size;
-	__u8 __user *data;
-};
-
-#define UVCIOC_CTRL_MAP		_IOWR('u', 0x20, struct uvc_xu_control_mapping)
-#define UVCIOC_CTRL_QUERY	_IOWR('u', 0x21, struct uvc_xu_control_query)
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/uwb.h b/ANDROID_3.4.5/include/linux/uwb.h
deleted file mode 100644
index 7dbbee97..00000000
--- a/ANDROID_3.4.5/include/linux/uwb.h
+++ /dev/null
@@ -1,831 +0,0 @@
-/*
- * Ultra Wide Band
- * UWB API
- *
- * Copyright (C) 2005-2006 Intel Corporation
- * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version
- * 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA.
- *
- *
- * FIXME: doc: overview of the API, different parts and pointers
- */
-
-#ifndef __LINUX__UWB_H__
-#define __LINUX__UWB_H__
-
-#include <linux/limits.h>
-#include <linux/device.h>
-#include <linux/mutex.h>
-#include <linux/timer.h>
-#include <linux/wait.h>
-#include <linux/workqueue.h>
-#include <linux/uwb/spec.h>
-#include <asm/page.h>
-
-struct uwb_dev;
-struct uwb_beca_e;
-struct uwb_rc;
-struct uwb_rsv;
-struct uwb_dbg;
-
-/**
- * struct uwb_dev - a UWB Device
- * @rc: UWB Radio Controller that discovered the device (kind of its
- *     parent).
- * @bce: a beacon cache entry for this device; or NULL if the device
- *     is a local radio controller.
- * @mac_addr: the EUI-48 address of this device.
- * @dev_addr: the current DevAddr used by this device.
- * @beacon_slot: the slot number the beacon is using.
- * @streams: bitmap of streams allocated to reservations targeted at
- *     this device.  For an RC, this is the streams allocated for
- *     reservations targeted at DevAddrs.
- *
- * A UWB device may either by a neighbor or part of a local radio
- * controller.
- */
-struct uwb_dev {
-	struct mutex mutex;
-	struct list_head list_node;
-	struct device dev;
-	struct uwb_rc *rc;		/* radio controller */
-	struct uwb_beca_e *bce;		/* Beacon Cache Entry */
-
-	struct uwb_mac_addr mac_addr;
-	struct uwb_dev_addr dev_addr;
-	int beacon_slot;
-	DECLARE_BITMAP(streams, UWB_NUM_STREAMS);
-	DECLARE_BITMAP(last_availability_bm, UWB_NUM_MAS);
-};
-#define to_uwb_dev(d) container_of(d, struct uwb_dev, dev)
-
-/**
- * UWB HWA/WHCI Radio Control {Command|Event} Block context IDs
- *
- * RC[CE]Bs have a 'context ID' field that matches the command with
- * the event received to confirm it.
- *
- * Maximum number of context IDs
- */
-enum { UWB_RC_CTX_MAX = 256 };
-
-
-/** Notification chain head for UWB generated events to listeners */
-struct uwb_notifs_chain {
-	struct list_head list;
-	struct mutex mutex;
-};
-
-/* Beacon cache list */
-struct uwb_beca {
-	struct list_head list;
-	size_t entries;
-	struct mutex mutex;
-};
-
-/* Event handling thread. */
-struct uwbd {
-	int pid;
-	struct task_struct *task;
-	wait_queue_head_t wq;
-	struct list_head event_list;
-	spinlock_t event_list_lock;
-};
-
-/**
- * struct uwb_mas_bm - a bitmap of all MAS in a superframe
- * @bm: a bitmap of length #UWB_NUM_MAS
- */
-struct uwb_mas_bm {
-	DECLARE_BITMAP(bm, UWB_NUM_MAS);
-	DECLARE_BITMAP(unsafe_bm, UWB_NUM_MAS);
-	int safe;
-	int unsafe;
-};
-
-/**
- * uwb_rsv_state - UWB Reservation state.
- *
- * NONE - reservation is not active (no DRP IE being transmitted).
- *
- * Owner reservation states:
- *
- * INITIATED - owner has sent an initial DRP request.
- * PENDING - target responded with pending Reason Code.
- * MODIFIED - reservation manager is modifying an established
- * reservation with a different MAS allocation.
- * ESTABLISHED - the reservation has been successfully negotiated.
- *
- * Target reservation states:
- *
- * DENIED - request is denied.
- * ACCEPTED - request is accepted.
- * PENDING - PAL has yet to make a decision to whether to accept or
- * deny.
- *
- * FIXME: further target states TBD.
- */
-enum uwb_rsv_state {
-	UWB_RSV_STATE_NONE = 0,
-	UWB_RSV_STATE_O_INITIATED,
-	UWB_RSV_STATE_O_PENDING,
-	UWB_RSV_STATE_O_MODIFIED,
-	UWB_RSV_STATE_O_ESTABLISHED,
-	UWB_RSV_STATE_O_TO_BE_MOVED,
-	UWB_RSV_STATE_O_MOVE_EXPANDING,
-	UWB_RSV_STATE_O_MOVE_COMBINING,
-	UWB_RSV_STATE_O_MOVE_REDUCING,
-	UWB_RSV_STATE_T_ACCEPTED,
-	UWB_RSV_STATE_T_DENIED,
-	UWB_RSV_STATE_T_CONFLICT,
-	UWB_RSV_STATE_T_PENDING,
-	UWB_RSV_STATE_T_EXPANDING_ACCEPTED,
-	UWB_RSV_STATE_T_EXPANDING_CONFLICT,
-	UWB_RSV_STATE_T_EXPANDING_PENDING,
-	UWB_RSV_STATE_T_EXPANDING_DENIED,
-	UWB_RSV_STATE_T_RESIZED,
-
-	UWB_RSV_STATE_LAST,
-};
-
-enum uwb_rsv_target_type {
-	UWB_RSV_TARGET_DEV,
-	UWB_RSV_TARGET_DEVADDR,
-};
-
-/**
- * struct uwb_rsv_target - the target of a reservation.
- *
- * Reservations unicast and targeted at a single device
- * (UWB_RSV_TARGET_DEV); or (e.g., in the case of WUSB) targeted at a
- * specific (private) DevAddr (UWB_RSV_TARGET_DEVADDR).
- */
-struct uwb_rsv_target {
-	enum uwb_rsv_target_type type;
-	union {
-		struct uwb_dev *dev;
-		struct uwb_dev_addr devaddr;
-	};
-};
-
-struct uwb_rsv_move {
-	struct uwb_mas_bm final_mas;
-	struct uwb_ie_drp *companion_drp_ie;
-	struct uwb_mas_bm companion_mas;
-};
-
-/*
- * Number of streams reserved for reservations targeted at DevAddrs.
- */
-#define UWB_NUM_GLOBAL_STREAMS 1
-
-typedef void (*uwb_rsv_cb_f)(struct uwb_rsv *rsv);
-
-/**
- * struct uwb_rsv - a DRP reservation
- *
- * Data structure management:
- *
- * @rc:             the radio controller this reservation is for
- *                  (as target or owner)
- * @rc_node:        a list node for the RC
- * @pal_node:       a list node for the PAL
- *
- * Owner and target parameters:
- *
- * @owner:          the UWB device owning this reservation
- * @target:         the target UWB device
- * @type:           reservation type
- *
- * Owner parameters:
- *
- * @max_mas:        maxiumum number of MAS
- * @min_mas:        minimum number of MAS
- * @sparsity:       owner selected sparsity
- * @is_multicast:   true iff multicast
- *
- * @callback:       callback function when the reservation completes
- * @pal_priv:       private data for the PAL making the reservation
- *
- * Reservation status:
- *
- * @status:         negotiation status
- * @stream:         stream index allocated for this reservation
- * @tiebreaker:     conflict tiebreaker for this reservation
- * @mas:            reserved MAS
- * @drp_ie:         the DRP IE
- * @ie_valid:       true iff the DRP IE matches the reservation parameters
- *
- * DRP reservations are uniquely identified by the owner, target and
- * stream index.  However, when using a DevAddr as a target (e.g., for
- * a WUSB cluster reservation) the responses may be received from
- * devices with different DevAddrs.  In this case, reservations are
- * uniquely identified by just the stream index.  A number of stream
- * indexes (UWB_NUM_GLOBAL_STREAMS) are reserved for this.
- */
-struct uwb_rsv {
-	struct uwb_rc *rc;
-	struct list_head rc_node;
-	struct list_head pal_node;
-	struct kref kref;
-
-	struct uwb_dev *owner;
-	struct uwb_rsv_target target;
-	enum uwb_drp_type type;
-	int max_mas;
-	int min_mas;
-	int max_interval;
-	bool is_multicast;
-
-	uwb_rsv_cb_f callback;
-	void *pal_priv;
-
-	enum uwb_rsv_state state;
-	bool needs_release_companion_mas;
-	u8 stream;
-	u8 tiebreaker;
-	struct uwb_mas_bm mas;
-	struct uwb_ie_drp *drp_ie;
-	struct uwb_rsv_move mv;
-	bool ie_valid;
-	struct timer_list timer;
-	struct work_struct handle_timeout_work;
-};
-
-static const
-struct uwb_mas_bm uwb_mas_bm_zero = { .bm = { 0 } };
-
-static inline void uwb_mas_bm_copy_le(void *dst, const struct uwb_mas_bm *mas)
-{
-	bitmap_copy_le(dst, mas->bm, UWB_NUM_MAS);
-}
-
-/**
- * struct uwb_drp_avail - a radio controller's view of MAS usage
- * @global:   MAS unused by neighbors (excluding reservations targeted
- *            or owned by the local radio controller) or the beaon period
- * @local:    MAS unused by local established reservations
- * @pending:  MAS unused by local pending reservations
- * @ie:       DRP Availability IE to be included in the beacon
- * @ie_valid: true iff @ie is valid and does not need to regenerated from
- *            @global and @local
- *
- * Each radio controller maintains a view of MAS usage or
- * availability. MAS available for a new reservation are determined
- * from the intersection of @global, @local, and @pending.
- *
- * The radio controller must transmit a DRP Availability IE that's the
- * intersection of @global and @local.
- *
- * A set bit indicates the MAS is unused and available.
- *
- * rc->rsvs_mutex should be held before accessing this data structure.
- *
- * [ECMA-368] section 17.4.3.
- */
-struct uwb_drp_avail {
-	DECLARE_BITMAP(global, UWB_NUM_MAS);
-	DECLARE_BITMAP(local, UWB_NUM_MAS);
-	DECLARE_BITMAP(pending, UWB_NUM_MAS);
-	struct uwb_ie_drp_avail ie;
-	bool ie_valid;
-};
-
-struct uwb_drp_backoff_win {
-	u8 window;
-	u8 n;
-	int total_expired;
-	struct timer_list timer;
-	bool can_reserve_extra_mases;
-};
-
-const char *uwb_rsv_state_str(enum uwb_rsv_state state);
-const char *uwb_rsv_type_str(enum uwb_drp_type type);
-
-struct uwb_rsv *uwb_rsv_create(struct uwb_rc *rc, uwb_rsv_cb_f cb,
-			       void *pal_priv);
-void uwb_rsv_destroy(struct uwb_rsv *rsv);
-
-int uwb_rsv_establish(struct uwb_rsv *rsv);
-int uwb_rsv_modify(struct uwb_rsv *rsv,
-		   int max_mas, int min_mas, int sparsity);
-void uwb_rsv_terminate(struct uwb_rsv *rsv);
-
-void uwb_rsv_accept(struct uwb_rsv *rsv, uwb_rsv_cb_f cb, void *pal_priv);
-
-void uwb_rsv_get_usable_mas(struct uwb_rsv *orig_rsv, struct uwb_mas_bm *mas);
-
-/**
- * Radio Control Interface instance
- *
- *
- * Life cycle rules: those of the UWB Device.
- *
- * @index:    an index number for this radio controller, as used in the
- *            device name.
- * @version:  version of protocol supported by this device
- * @priv:     Backend implementation; rw with uwb_dev.dev.sem taken.
- * @cmd:      Backend implementation to execute commands; rw and call
- *            only  with uwb_dev.dev.sem taken.
- * @reset:    Hardware reset of radio controller and any PAL controllers.
- * @filter:   Backend implementation to manipulate data to and from device
- *            to be compliant to specification assumed by driver (WHCI
- *            0.95).
- *
- *            uwb_dev.dev.mutex is used to execute commands and update
- *            the corresponding structures; can't use a spinlock
- *            because rc->cmd() can sleep.
- * @ies:         This is a dynamically allocated array cacheing the
- *               IEs (settable by the host) that the beacon of this
- *               radio controller is currently sending.
- *
- *               In reality, we store here the full command we set to
- *               the radio controller (which is basically a command
- *               prefix followed by all the IEs the beacon currently
- *               contains). This way we don't have to realloc and
- *               memcpy when setting it.
- *
- *               We set this up in uwb_rc_ie_setup(), where we alloc
- *               this struct, call get_ie() [so we know which IEs are
- *               currently being sent, if any].
- *
- * @ies_capacity:Amount of space (in bytes) allocated in @ies. The
- *               amount used is given by sizeof(*ies) plus ies->wIELength
- *               (which is a little endian quantity all the time).
- * @ies_mutex:   protect the IE cache
- * @dbg:         information for the debug interface
- */
-struct uwb_rc {
-	struct uwb_dev uwb_dev;
-	int index;
-	u16 version;
-
-	struct module *owner;
-	void *priv;
-	int (*start)(struct uwb_rc *rc);
-	void (*stop)(struct uwb_rc *rc);
-	int (*cmd)(struct uwb_rc *, const struct uwb_rccb *, size_t);
-	int (*reset)(struct uwb_rc *rc);
-	int (*filter_cmd)(struct uwb_rc *, struct uwb_rccb **, size_t *);
-	int (*filter_event)(struct uwb_rc *, struct uwb_rceb **, const size_t,
-			    size_t *, size_t *);
-
-	spinlock_t neh_lock;		/* protects neh_* and ctx_* */
-	struct list_head neh_list;	/* Open NE handles */
-	unsigned long ctx_bm[UWB_RC_CTX_MAX / 8 / sizeof(unsigned long)];
-	u8 ctx_roll;
-
-	int beaconing;			/* Beaconing state [channel number] */
-	int beaconing_forced;
-	int scanning;
-	enum uwb_scan_type scan_type:3;
-	unsigned ready:1;
-	struct uwb_notifs_chain notifs_chain;
-	struct uwb_beca uwb_beca;
-
-	struct uwbd uwbd;
-
-	struct uwb_drp_backoff_win bow;
-	struct uwb_drp_avail drp_avail;
-	struct list_head reservations;
-	struct list_head cnflt_alien_list;
-	struct uwb_mas_bm cnflt_alien_bitmap;
-	struct mutex rsvs_mutex;
-	spinlock_t rsvs_lock;
-	struct workqueue_struct *rsv_workq;
-
-	struct delayed_work rsv_update_work;
-	struct delayed_work rsv_alien_bp_work;
-	int set_drp_ie_pending;
-	struct mutex ies_mutex;
-	struct uwb_rc_cmd_set_ie *ies;
-	size_t ies_capacity;
-
-	struct list_head pals;
-	int active_pals;
-
-	struct uwb_dbg *dbg;
-};
-
-
-/**
- * struct uwb_pal - a UWB PAL
- * @name:    descriptive name for this PAL (wusbhc, wlp, etc.).
- * @device:  a device for the PAL.  Used to link the PAL and the radio
- *           controller in sysfs.
- * @rc:      the radio controller the PAL uses.
- * @channel_changed: called when the channel used by the radio changes.
- *           A channel of -1 means the channel has been stopped.
- * @new_rsv: called when a peer requests a reservation (may be NULL if
- *           the PAL cannot accept reservation requests).
- * @channel: channel being used by the PAL; 0 if the PAL isn't using
- *           the radio; -1 if the PAL wishes to use the radio but
- *           cannot.
- * @debugfs_dir: a debugfs directory which the PAL can use for its own
- *           debugfs files.
- *
- * A Protocol Adaptation Layer (PAL) is a user of the WiMedia UWB
- * radio platform (e.g., WUSB, WLP or Bluetooth UWB AMP).
- *
- * The PALs using a radio controller must register themselves to
- * permit the UWB stack to coordinate usage of the radio between the
- * various PALs or to allow PALs to response to certain requests from
- * peers.
- *
- * A struct uwb_pal should be embedded in a containing structure
- * belonging to the PAL and initialized with uwb_pal_init()).  Fields
- * should be set appropriately by the PAL before registering the PAL
- * with uwb_pal_register().
- */
-struct uwb_pal {
-	struct list_head node;
-	const char *name;
-	struct device *device;
-	struct uwb_rc *rc;
-
-	void (*channel_changed)(struct uwb_pal *pal, int channel);
-	void (*new_rsv)(struct uwb_pal *pal, struct uwb_rsv *rsv);
-
-	int channel;
-	struct dentry *debugfs_dir;
-};
-
-void uwb_pal_init(struct uwb_pal *pal);
-int uwb_pal_register(struct uwb_pal *pal);
-void uwb_pal_unregister(struct uwb_pal *pal);
-
-int uwb_radio_start(struct uwb_pal *pal);
-void uwb_radio_stop(struct uwb_pal *pal);
-
-/*
- * General public API
- *
- * This API can be used by UWB device drivers or by those implementing
- * UWB Radio Controllers
- */
-struct uwb_dev *uwb_dev_get_by_devaddr(struct uwb_rc *rc,
-				       const struct uwb_dev_addr *devaddr);
-struct uwb_dev *uwb_dev_get_by_rc(struct uwb_dev *, struct uwb_rc *);
-static inline void uwb_dev_get(struct uwb_dev *uwb_dev)
-{
-	get_device(&uwb_dev->dev);
-}
-static inline void uwb_dev_put(struct uwb_dev *uwb_dev)
-{
-	put_device(&uwb_dev->dev);
-}
-struct uwb_dev *uwb_dev_try_get(struct uwb_rc *rc, struct uwb_dev *uwb_dev);
-
-/**
- * Callback function for 'uwb_{dev,rc}_foreach()'.
- *
- * @dev:  Linux device instance
- *        'uwb_dev = container_of(dev, struct uwb_dev, dev)'
- * @priv: Data passed by the caller to 'uwb_{dev,rc}_foreach()'.
- *
- * @returns: 0 to continue the iterations, any other val to stop
- *           iterating and return the value to the caller of
- *           _foreach().
- */
-typedef int (*uwb_dev_for_each_f)(struct device *dev, void *priv);
-int uwb_dev_for_each(struct uwb_rc *rc, uwb_dev_for_each_f func, void *priv);
-
-struct uwb_rc *uwb_rc_alloc(void);
-struct uwb_rc *uwb_rc_get_by_dev(const struct uwb_dev_addr *);
-struct uwb_rc *uwb_rc_get_by_grandpa(const struct device *);
-void uwb_rc_put(struct uwb_rc *rc);
-
-typedef void (*uwb_rc_cmd_cb_f)(struct uwb_rc *rc, void *arg,
-                                struct uwb_rceb *reply, ssize_t reply_size);
-
-int uwb_rc_cmd_async(struct uwb_rc *rc, const char *cmd_name,
-		     struct uwb_rccb *cmd, size_t cmd_size,
-		     u8 expected_type, u16 expected_event,
-		     uwb_rc_cmd_cb_f cb, void *arg);
-ssize_t uwb_rc_cmd(struct uwb_rc *rc, const char *cmd_name,
-		   struct uwb_rccb *cmd, size_t cmd_size,
-		   struct uwb_rceb *reply, size_t reply_size);
-ssize_t uwb_rc_vcmd(struct uwb_rc *rc, const char *cmd_name,
-		    struct uwb_rccb *cmd, size_t cmd_size,
-		    u8 expected_type, u16 expected_event,
-		    struct uwb_rceb **preply);
-
-size_t __uwb_addr_print(char *, size_t, const unsigned char *, int);
-
-int uwb_rc_dev_addr_set(struct uwb_rc *, const struct uwb_dev_addr *);
-int uwb_rc_dev_addr_get(struct uwb_rc *, struct uwb_dev_addr *);
-int uwb_rc_mac_addr_set(struct uwb_rc *, const struct uwb_mac_addr *);
-int uwb_rc_mac_addr_get(struct uwb_rc *, struct uwb_mac_addr *);
-int __uwb_mac_addr_assigned_check(struct device *, void *);
-int __uwb_dev_addr_assigned_check(struct device *, void *);
-
-/* Print in @buf a pretty repr of @addr */
-static inline size_t uwb_dev_addr_print(char *buf, size_t buf_size,
-					const struct uwb_dev_addr *addr)
-{
-	return __uwb_addr_print(buf, buf_size, addr->data, 0);
-}
-
-/* Print in @buf a pretty repr of @addr */
-static inline size_t uwb_mac_addr_print(char *buf, size_t buf_size,
-					const struct uwb_mac_addr *addr)
-{
-	return __uwb_addr_print(buf, buf_size, addr->data, 1);
-}
-
-/* @returns 0 if device addresses @addr2 and @addr1 are equal */
-static inline int uwb_dev_addr_cmp(const struct uwb_dev_addr *addr1,
-				   const struct uwb_dev_addr *addr2)
-{
-	return memcmp(addr1, addr2, sizeof(*addr1));
-}
-
-/* @returns 0 if MAC addresses @addr2 and @addr1 are equal */
-static inline int uwb_mac_addr_cmp(const struct uwb_mac_addr *addr1,
-				   const struct uwb_mac_addr *addr2)
-{
-	return memcmp(addr1, addr2, sizeof(*addr1));
-}
-
-/* @returns !0 if a MAC @addr is a broadcast address */
-static inline int uwb_mac_addr_bcast(const struct uwb_mac_addr *addr)
-{
-	struct uwb_mac_addr bcast = {
-		.data = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff }
-	};
-	return !uwb_mac_addr_cmp(addr, &bcast);
-}
-
-/* @returns !0 if a MAC @addr is all zeroes*/
-static inline int uwb_mac_addr_unset(const struct uwb_mac_addr *addr)
-{
-	struct uwb_mac_addr unset = {
-		.data = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }
-	};
-	return !uwb_mac_addr_cmp(addr, &unset);
-}
-
-/* @returns !0 if the address is in use. */
-static inline unsigned __uwb_dev_addr_assigned(struct uwb_rc *rc,
-					       struct uwb_dev_addr *addr)
-{
-	return uwb_dev_for_each(rc, __uwb_dev_addr_assigned_check, addr);
-}
-
-/*
- * UWB Radio Controller API
- *
- * This API is used (in addition to the general API) to implement UWB
- * Radio Controllers.
- */
-void uwb_rc_init(struct uwb_rc *);
-int uwb_rc_add(struct uwb_rc *, struct device *dev, void *rc_priv);
-void uwb_rc_rm(struct uwb_rc *);
-void uwb_rc_neh_grok(struct uwb_rc *, void *, size_t);
-void uwb_rc_neh_error(struct uwb_rc *, int);
-void uwb_rc_reset_all(struct uwb_rc *rc);
-void uwb_rc_pre_reset(struct uwb_rc *rc);
-int uwb_rc_post_reset(struct uwb_rc *rc);
-
-/**
- * uwb_rsv_is_owner - is the owner of this reservation the RC?
- * @rsv: the reservation
- */
-static inline bool uwb_rsv_is_owner(struct uwb_rsv *rsv)
-{
-	return rsv->owner == &rsv->rc->uwb_dev;
-}
-
-/**
- * enum uwb_notifs - UWB events that can be passed to any listeners
- * @UWB_NOTIF_ONAIR: a new neighbour has joined the beacon group.
- * @UWB_NOTIF_OFFAIR: a neighbour has left the beacon group.
- *
- * Higher layers can register callback functions with the radio
- * controller using uwb_notifs_register(). The radio controller
- * maintains a list of all registered handlers and will notify all
- * nodes when an event occurs.
- */
-enum uwb_notifs {
-	UWB_NOTIF_ONAIR,
-	UWB_NOTIF_OFFAIR,
-};
-
-/* Callback function registered with UWB */
-struct uwb_notifs_handler {
-	struct list_head list_node;
-	void (*cb)(void *, struct uwb_dev *, enum uwb_notifs);
-	void *data;
-};
-
-int uwb_notifs_register(struct uwb_rc *, struct uwb_notifs_handler *);
-int uwb_notifs_deregister(struct uwb_rc *, struct uwb_notifs_handler *);
-
-
-/**
- * UWB radio controller Event Size Entry (for creating entry tables)
- *
- * WUSB and WHCI define events and notifications, and they might have
- * fixed or variable size.
- *
- * Each event/notification has a size which is not necessarily known
- * in advance based on the event code. As well, vendor specific
- * events/notifications will have a size impossible to determine
- * unless we know about the device's specific details.
- *
- * It was way too smart of the spec writers not to think that it would
- * be impossible for a generic driver to skip over vendor specific
- * events/notifications if there are no LENGTH fields in the HEADER of
- * each message...the transaction size cannot be counted on as the
- * spec does not forbid to pack more than one event in a single
- * transaction.
- *
- * Thus, we guess sizes with tables (or for events, when you know the
- * size ahead of time you can use uwb_rc_neh_extra_size*()). We
- * register tables with the known events and their sizes, and then we
- * traverse those tables. For those with variable length, we provide a
- * way to lookup the size inside the event/notification's
- * payload. This allows device-specific event size tables to be
- * registered.
- *
- * @size:   Size of the payload
- *
- * @offset: if != 0, at offset @offset-1 starts a field with a length
- *          that has to be added to @size. The format of the field is
- *          given by @type.
- *
- * @type:   Type and length of the offset field. Most common is LE 16
- *          bits (that's why that is zero); others are there mostly to
- *          cover for bugs and weirdos.
- */
-struct uwb_est_entry {
-	size_t size;
-	unsigned offset;
-	enum { UWB_EST_16 = 0, UWB_EST_8 = 1 } type;
-};
-
-int uwb_est_register(u8 type, u8 code_high, u16 vendor, u16 product,
-		     const struct uwb_est_entry *, size_t entries);
-int uwb_est_unregister(u8 type, u8 code_high, u16 vendor, u16 product,
-		       const struct uwb_est_entry *, size_t entries);
-ssize_t uwb_est_find_size(struct uwb_rc *rc, const struct uwb_rceb *rceb,
-			  size_t len);
-
-/* -- Misc */
-
-enum {
-	EDC_MAX_ERRORS = 10,
-	EDC_ERROR_TIMEFRAME = HZ,
-};
-
-/* error density counter */
-struct edc {
-	unsigned long timestart;
-	u16 errorcount;
-};
-
-static inline
-void edc_init(struct edc *edc)
-{
-	edc->timestart = jiffies;
-}
-
-/* Called when an error occurred.
- * This is way to determine if the number of acceptable errors per time
- * period has been exceeded. It is not accurate as there are cases in which
- * this scheme will not work, for example if there are periodic occurrences
- * of errors that straddle updates to the start time. This scheme is
- * sufficient for our usage.
- *
- * @returns 1 if maximum acceptable errors per timeframe has been exceeded.
- */
-static inline int edc_inc(struct edc *err_hist, u16 max_err, u16 timeframe)
-{
-	unsigned long now;
-
-	now = jiffies;
-	if (now - err_hist->timestart > timeframe) {
-		err_hist->errorcount = 1;
-		err_hist->timestart = now;
-	} else if (++err_hist->errorcount > max_err) {
-			err_hist->errorcount = 0;
-			err_hist->timestart = now;
-			return 1;
-	}
-	return 0;
-}
-
-
-/* Information Element handling */
-
-struct uwb_ie_hdr *uwb_ie_next(void **ptr, size_t *len);
-int uwb_rc_ie_add(struct uwb_rc *uwb_rc, const struct uwb_ie_hdr *ies, size_t size);
-int uwb_rc_ie_rm(struct uwb_rc *uwb_rc, enum uwb_ie element_id);
-
-/*
- * Transmission statistics
- *
- * UWB uses LQI and RSSI (one byte values) for reporting radio signal
- * strength and line quality indication. We do quick and dirty
- * averages of those. They are signed values, btw.
- *
- * For 8 bit quantities, we keep the min, the max, an accumulator
- * (@sigma) and a # of samples. When @samples gets to 255, we compute
- * the average (@sigma / @samples), place it in @sigma and reset
- * @samples to 1 (so we use it as the first sample).
- *
- * Now, statistically speaking, probably I am kicking the kidneys of
- * some books I have in my shelves collecting dust, but I just want to
- * get an approx, not the Nobel.
- *
- * LOCKING: there is no locking per se, but we try to keep a lockless
- * schema. Only _add_samples() modifies the values--as long as you
- * have other locking on top that makes sure that no two calls of
- * _add_sample() happen at the same time, then we are fine. Now, for
- * resetting the values we just set @samples to 0 and that makes the
- * next _add_sample() to start with defaults. Reading the values in
- * _show() currently can race, so you need to make sure the calls are
- * under the same lock that protects calls to _add_sample(). FIXME:
- * currently unlocked (It is not ultraprecise but does the trick. Bite
- * me).
- */
-struct stats {
-	s8 min, max;
-	s16 sigma;
-	atomic_t samples;
-};
-
-static inline
-void stats_init(struct stats *stats)
-{
-	atomic_set(&stats->samples, 0);
-	wmb();
-}
-
-static inline
-void stats_add_sample(struct stats *stats, s8 sample)
-{
-	s8 min, max;
-	s16 sigma;
-	unsigned samples = atomic_read(&stats->samples);
-	if (samples == 0) {	/* it was zero before, so we initialize */
-		min = 127;
-		max = -128;
-		sigma = 0;
-	} else {
-		min = stats->min;
-		max = stats->max;
-		sigma = stats->sigma;
-	}
-
-	if (sample < min)	/* compute new values */
-		min = sample;
-	else if (sample > max)
-		max = sample;
-	sigma += sample;
-
-	stats->min = min;	/* commit */
-	stats->max = max;
-	stats->sigma = sigma;
-	if (atomic_add_return(1, &stats->samples) > 255) {
-		/* wrapped around! reset */
-		stats->sigma = sigma / 256;
-		atomic_set(&stats->samples, 1);
-	}
-}
-
-static inline ssize_t stats_show(struct stats *stats, char *buf)
-{
-	int min, max, avg;
-	int samples = atomic_read(&stats->samples);
-	if (samples == 0)
-		min = max = avg = 0;
-	else {
-		min = stats->min;
-		max = stats->max;
-		avg = stats->sigma / samples;
-	}
-	return scnprintf(buf, PAGE_SIZE, "%d %d %d\n", min, max, avg);
-}
-
-static inline ssize_t stats_store(struct stats *stats, const char *buf,
-				  size_t size)
-{
-	stats_init(stats);
-	return size;
-}
-
-#endif /* #ifndef __LINUX__UWB_H__ */
diff --git a/ANDROID_3.4.5/include/linux/uwb/debug-cmd.h b/ANDROID_3.4.5/include/linux/uwb/debug-cmd.h
deleted file mode 100644
index 8da004e2..00000000
--- a/ANDROID_3.4.5/include/linux/uwb/debug-cmd.h
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * Ultra Wide Band
- * Debug interface commands
- *
- * Copyright (C) 2008 Cambridge Silicon Radio Ltd.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version
- * 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-#ifndef __LINUX__UWB__DEBUG_CMD_H__
-#define __LINUX__UWB__DEBUG_CMD_H__
-
-#include <linux/types.h>
-
-/*
- * Debug interface commands
- *
- * UWB_DBG_CMD_RSV_ESTABLISH: Establish a new unicast reservation.
- *
- * UWB_DBG_CMD_RSV_TERMINATE: Terminate the Nth reservation.
- */
-
-enum uwb_dbg_cmd_type {
-	UWB_DBG_CMD_RSV_ESTABLISH = 1,
-	UWB_DBG_CMD_RSV_TERMINATE = 2,
-	UWB_DBG_CMD_IE_ADD = 3,
-	UWB_DBG_CMD_IE_RM = 4,
-	UWB_DBG_CMD_RADIO_START = 5,
-	UWB_DBG_CMD_RADIO_STOP = 6,
-};
-
-struct uwb_dbg_cmd_rsv_establish {
-	__u8  target[6];
-	__u8  type;
-	__u16 max_mas;
-	__u16 min_mas;
-	__u8  max_interval;
-};
-
-struct uwb_dbg_cmd_rsv_terminate {
-	int index;
-};
-
-struct uwb_dbg_cmd_ie {
-	__u8 data[128];
-	int len;
-};
-
-struct uwb_dbg_cmd {
-	__u32 type;
-	union {
-		struct uwb_dbg_cmd_rsv_establish rsv_establish;
-		struct uwb_dbg_cmd_rsv_terminate rsv_terminate;
-		struct uwb_dbg_cmd_ie ie_add;
-		struct uwb_dbg_cmd_ie ie_rm;
-	};
-};
-
-#endif /* #ifndef __LINUX__UWB__DEBUG_CMD_H__ */
diff --git a/ANDROID_3.4.5/include/linux/uwb/spec.h b/ANDROID_3.4.5/include/linux/uwb/spec.h
deleted file mode 100644
index b52e44f1..00000000
--- a/ANDROID_3.4.5/include/linux/uwb/spec.h
+++ /dev/null
@@ -1,780 +0,0 @@
-/*
- * Ultra Wide Band
- * UWB Standard definitions
- *
- * Copyright (C) 2005-2006 Intel Corporation
- * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version
- * 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA.
- *
- *
- * All these definitions are based on the ECMA-368 standard.
- *
- * Note all definitions are Little Endian in the wire, and we will
- * convert them to host order before operating on the bitfields (that
- * yes, we use extensively).
- */
-
-#ifndef __LINUX__UWB_SPEC_H__
-#define __LINUX__UWB_SPEC_H__
-
-#include <linux/types.h>
-#include <linux/bitmap.h>
-
-#define i1480_FW 0x00000303
-/* #define i1480_FW 0x00000302 */
-
-/**
- * Number of Medium Access Slots in a superframe.
- *
- * UWB divides time in SuperFrames, each one divided in 256 pieces, or
- * Medium Access Slots. See MBOA MAC[5.4.5] for details. The MAS is the
- * basic bandwidth allocation unit in UWB.
- */
-enum { UWB_NUM_MAS = 256 };
-
-/**
- * Number of Zones in superframe.
- *
- * UWB divides the superframe into zones with numbering starting from BPST.
- * See MBOA MAC[16.8.6]
- */
-enum { UWB_NUM_ZONES = 16 };
-
-/*
- * Number of MAS in a zone.
- */
-#define UWB_MAS_PER_ZONE (UWB_NUM_MAS / UWB_NUM_ZONES)
-
-/*
- * Number of MAS required before a row can be considered available.
- */
-#define UWB_USABLE_MAS_PER_ROW (UWB_NUM_ZONES - 1)
-
-/*
- * Number of streams per DRP reservation between a pair of devices.
- *
- * [ECMA-368] section 16.8.6.
- */
-enum { UWB_NUM_STREAMS = 8 };
-
-/*
- * mMasLength
- *
- * The length of a MAS in microseconds.
- *
- * [ECMA-368] section 17.16.
- */
-enum { UWB_MAS_LENGTH_US = 256 };
-
-/*
- * mBeaconSlotLength
- *
- * The length of the beacon slot in microseconds.
- *
- * [ECMA-368] section 17.16
- */
-enum { UWB_BEACON_SLOT_LENGTH_US = 85 };
-
-/*
- * mMaxLostBeacons
- *
- * The number beacons missing in consecutive superframes before a
- * device can be considered as unreachable.
- *
- * [ECMA-368] section 17.16
- */
-enum { UWB_MAX_LOST_BEACONS = 3 };
-
-/*
- * mDRPBackOffWinMin
- *
- * The minimum number of superframes to wait before trying to reserve
- * extra MAS.
- *
- * [ECMA-368] section 17.16
- */
-enum { UWB_DRP_BACKOFF_WIN_MIN = 2 };
-
-/*
- * mDRPBackOffWinMax
- *
- * The maximum number of superframes to wait before trying to reserve
- * extra MAS.
- *
- * [ECMA-368] section 17.16
- */
-enum { UWB_DRP_BACKOFF_WIN_MAX = 16 };
-
-/*
- * Length of a superframe in microseconds.
- */
-#define UWB_SUPERFRAME_LENGTH_US (UWB_MAS_LENGTH_US * UWB_NUM_MAS)
-
-/**
- * UWB MAC address
- *
- * It is *imperative* that this struct is exactly 6 packed bytes (as
- * it is also used to define headers sent down and up the wire/radio).
- */
-struct uwb_mac_addr {
-	u8 data[6];
-} __attribute__((packed));
-
-
-/**
- * UWB device address
- *
- * It is *imperative* that this struct is exactly 6 packed bytes (as
- * it is also used to define headers sent down and up the wire/radio).
- */
-struct uwb_dev_addr {
-	u8 data[2];
-} __attribute__((packed));
-
-
-/**
- * Types of UWB addresses
- *
- * Order matters (by size).
- */
-enum uwb_addr_type {
-	UWB_ADDR_DEV = 0,
-	UWB_ADDR_MAC = 1,
-};
-
-
-/** Size of a char buffer for printing a MAC/device address */
-enum { UWB_ADDR_STRSIZE = 32 };
-
-
-/** UWB WiMedia protocol IDs. */
-enum uwb_prid {
-	UWB_PRID_WLP_RESERVED   = 0x0000,
-	UWB_PRID_WLP		= 0x0001,
-	UWB_PRID_WUSB_BOT	= 0x0010,
-	UWB_PRID_WUSB		= 0x0010,
-	UWB_PRID_WUSB_TOP	= 0x001F,
-};
-
-
-/** PHY Rate (MBOA MAC[7.8.12, Table 61]) */
-enum uwb_phy_rate {
-	UWB_PHY_RATE_53 = 0,
-	UWB_PHY_RATE_80,
-	UWB_PHY_RATE_106,
-	UWB_PHY_RATE_160,
-	UWB_PHY_RATE_200,
-	UWB_PHY_RATE_320,
-	UWB_PHY_RATE_400,
-	UWB_PHY_RATE_480,
-	UWB_PHY_RATE_INVALID
-};
-
-
-/**
- * Different ways to scan (MBOA MAC[6.2.2, Table 8], WUSB[Table 8-78])
- */
-enum uwb_scan_type {
-	UWB_SCAN_ONLY = 0,
-	UWB_SCAN_OUTSIDE_BP,
-	UWB_SCAN_WHILE_INACTIVE,
-	UWB_SCAN_DISABLED,
-	UWB_SCAN_ONLY_STARTTIME,
-	UWB_SCAN_TOP
-};
-
-
-/** ACK Policy types (MBOA MAC[7.2.1.3]) */
-enum uwb_ack_pol {
-	UWB_ACK_NO = 0,
-	UWB_ACK_INM = 1,
-	UWB_ACK_B = 2,
-	UWB_ACK_B_REQ = 3,
-};
-
-
-/** DRP reservation types ([ECMA-368 table 106) */
-enum uwb_drp_type {
-	UWB_DRP_TYPE_ALIEN_BP = 0,
-	UWB_DRP_TYPE_HARD,
-	UWB_DRP_TYPE_SOFT,
-	UWB_DRP_TYPE_PRIVATE,
-	UWB_DRP_TYPE_PCA,
-};
-
-
-/** DRP Reason Codes ([ECMA-368] table 107) */
-enum uwb_drp_reason {
-	UWB_DRP_REASON_ACCEPTED = 0,
-	UWB_DRP_REASON_CONFLICT,
-	UWB_DRP_REASON_PENDING,
-	UWB_DRP_REASON_DENIED,
-	UWB_DRP_REASON_MODIFIED,
-};
-
-/** Relinquish Request Reason Codes ([ECMA-368] table 113) */
-enum uwb_relinquish_req_reason {
-	UWB_RELINQUISH_REQ_REASON_NON_SPECIFIC = 0,
-	UWB_RELINQUISH_REQ_REASON_OVER_ALLOCATION,
-};
-
-/**
- *  DRP Notification Reason Codes (WHCI 0.95 [3.1.4.9])
- */
-enum uwb_drp_notif_reason {
-	UWB_DRP_NOTIF_DRP_IE_RCVD = 0,
-	UWB_DRP_NOTIF_CONFLICT,
-	UWB_DRP_NOTIF_TERMINATE,
-};
-
-
-/** Allocation of MAS slots in a DRP request MBOA MAC[7.8.7] */
-struct uwb_drp_alloc {
-	__le16 zone_bm;
-	__le16 mas_bm;
-} __attribute__((packed));
-
-
-/** General MAC Header format (ECMA-368[16.2]) */
-struct uwb_mac_frame_hdr {
-	__le16 Frame_Control;
-	struct uwb_dev_addr DestAddr;
-	struct uwb_dev_addr SrcAddr;
-	__le16 Sequence_Control;
-	__le16 Access_Information;
-} __attribute__((packed));
-
-
-/**
- * uwb_beacon_frame - a beacon frame including MAC headers
- *
- * [ECMA] section 16.3.
- */
-struct uwb_beacon_frame {
-	struct uwb_mac_frame_hdr hdr;
-	struct uwb_mac_addr Device_Identifier;	/* may be a NULL EUI-48 */
-	u8 Beacon_Slot_Number;
-	u8 Device_Control;
-	u8 IEData[];
-} __attribute__((packed));
-
-
-/** Information Element codes (MBOA MAC[T54]) */
-enum uwb_ie {
-	UWB_PCA_AVAILABILITY = 2,
-	UWB_IE_DRP_AVAILABILITY = 8,
-	UWB_IE_DRP = 9,
-	UWB_BP_SWITCH_IE = 11,
-	UWB_MAC_CAPABILITIES_IE = 12,
-	UWB_PHY_CAPABILITIES_IE = 13,
-	UWB_APP_SPEC_PROBE_IE = 15,
-	UWB_IDENTIFICATION_IE = 19,
-	UWB_MASTER_KEY_ID_IE = 20,
-	UWB_RELINQUISH_REQUEST_IE = 21,
-	UWB_IE_WLP = 250, /* WiMedia Logical Link Control Protocol WLP 0.99 */
-	UWB_APP_SPEC_IE = 255,
-};
-
-
-/**
- * Header common to all Information Elements (IEs)
- */
-struct uwb_ie_hdr {
-	u8 element_id;	/* enum uwb_ie */
-	u8 length;
-} __attribute__((packed));
-
-
-/** Dynamic Reservation Protocol IE (MBOA MAC[7.8.6]) */
-struct uwb_ie_drp {
-	struct uwb_ie_hdr	hdr;
-	__le16                  drp_control;
-	struct uwb_dev_addr	dev_addr;
-	struct uwb_drp_alloc	allocs[];
-} __attribute__((packed));
-
-static inline int uwb_ie_drp_type(struct uwb_ie_drp *ie)
-{
-	return (le16_to_cpu(ie->drp_control) >> 0) & 0x7;
-}
-
-static inline int uwb_ie_drp_stream_index(struct uwb_ie_drp *ie)
-{
-	return (le16_to_cpu(ie->drp_control) >> 3) & 0x7;
-}
-
-static inline int uwb_ie_drp_reason_code(struct uwb_ie_drp *ie)
-{
-	return (le16_to_cpu(ie->drp_control) >> 6) & 0x7;
-}
-
-static inline int uwb_ie_drp_status(struct uwb_ie_drp *ie)
-{
-	return (le16_to_cpu(ie->drp_control) >> 9) & 0x1;
-}
-
-static inline int uwb_ie_drp_owner(struct uwb_ie_drp *ie)
-{
-	return (le16_to_cpu(ie->drp_control) >> 10) & 0x1;
-}
-
-static inline int uwb_ie_drp_tiebreaker(struct uwb_ie_drp *ie)
-{
-	return (le16_to_cpu(ie->drp_control) >> 11) & 0x1;
-}
-
-static inline int uwb_ie_drp_unsafe(struct uwb_ie_drp *ie)
-{
-	return (le16_to_cpu(ie->drp_control) >> 12) & 0x1;
-}
-
-static inline void uwb_ie_drp_set_type(struct uwb_ie_drp *ie, enum uwb_drp_type type)
-{
-	u16 drp_control = le16_to_cpu(ie->drp_control);
-	drp_control = (drp_control & ~(0x7 << 0)) | (type << 0);
-	ie->drp_control = cpu_to_le16(drp_control);
-}
-
-static inline void uwb_ie_drp_set_stream_index(struct uwb_ie_drp *ie, int stream_index)
-{
-	u16 drp_control = le16_to_cpu(ie->drp_control);
-	drp_control = (drp_control & ~(0x7 << 3)) | (stream_index << 3);
-	ie->drp_control = cpu_to_le16(drp_control);
-}
-
-static inline void uwb_ie_drp_set_reason_code(struct uwb_ie_drp *ie,
-				       enum uwb_drp_reason reason_code)
-{
-	u16 drp_control = le16_to_cpu(ie->drp_control);
-	drp_control = (ie->drp_control & ~(0x7 << 6)) | (reason_code << 6);
-	ie->drp_control = cpu_to_le16(drp_control);
-}
-
-static inline void uwb_ie_drp_set_status(struct uwb_ie_drp *ie, int status)
-{
-	u16 drp_control = le16_to_cpu(ie->drp_control);
-	drp_control = (drp_control & ~(0x1 << 9)) | (status << 9);
-	ie->drp_control = cpu_to_le16(drp_control);
-}
-
-static inline void uwb_ie_drp_set_owner(struct uwb_ie_drp *ie, int owner)
-{
-	u16 drp_control = le16_to_cpu(ie->drp_control);
-	drp_control = (drp_control & ~(0x1 << 10)) | (owner << 10);
-	ie->drp_control = cpu_to_le16(drp_control);
-}
-
-static inline void uwb_ie_drp_set_tiebreaker(struct uwb_ie_drp *ie, int tiebreaker)
-{
-	u16 drp_control = le16_to_cpu(ie->drp_control);
-	drp_control = (drp_control & ~(0x1 << 11)) | (tiebreaker << 11);
-	ie->drp_control = cpu_to_le16(drp_control);
-}
-
-static inline void uwb_ie_drp_set_unsafe(struct uwb_ie_drp *ie, int unsafe)
-{
-	u16 drp_control = le16_to_cpu(ie->drp_control);
-	drp_control = (drp_control & ~(0x1 << 12)) | (unsafe << 12);
-	ie->drp_control = cpu_to_le16(drp_control);
-}
-
-/** Dynamic Reservation Protocol IE (MBOA MAC[7.8.7]) */
-struct uwb_ie_drp_avail {
-	struct uwb_ie_hdr	hdr;
-	DECLARE_BITMAP(bmp, UWB_NUM_MAS);
-} __attribute__((packed));
-
-/* Relinqish Request IE ([ECMA-368] section 16.8.19). */
-struct uwb_relinquish_request_ie {
-        struct uwb_ie_hdr       hdr;
-        __le16                  relinquish_req_control;
-        struct uwb_dev_addr     dev_addr;
-        struct uwb_drp_alloc    allocs[];
-} __attribute__((packed));
-
-static inline int uwb_ie_relinquish_req_reason_code(struct uwb_relinquish_request_ie *ie)
-{
-	return (le16_to_cpu(ie->relinquish_req_control) >> 0) & 0xf;
-}
-
-static inline void uwb_ie_relinquish_req_set_reason_code(struct uwb_relinquish_request_ie *ie,
-							 int reason_code)
-{
-	u16 ctrl = le16_to_cpu(ie->relinquish_req_control);
-	ctrl = (ctrl & ~(0xf << 0)) | (reason_code << 0);
-	ie->relinquish_req_control = cpu_to_le16(ctrl);
-}
-
-/**
- * The Vendor ID is set to an OUI that indicates the vendor of the device.
- * ECMA-368 [16.8.10]
- */
-struct uwb_vendor_id {
-	u8 data[3];
-} __attribute__((packed));
-
-/**
- * The device type ID
- * FIXME: clarify what this means
- * ECMA-368 [16.8.10]
- */
-struct uwb_device_type_id {
-	u8 data[3];
-} __attribute__((packed));
-
-
-/**
- * UWB device information types
- * ECMA-368 [16.8.10]
- */
-enum uwb_dev_info_type {
-	UWB_DEV_INFO_VENDOR_ID = 0,
-	UWB_DEV_INFO_VENDOR_TYPE,
-	UWB_DEV_INFO_NAME,
-};
-
-/**
- * UWB device information found in Identification IE
- * ECMA-368 [16.8.10]
- */
-struct uwb_dev_info {
-	u8 type;	/* enum uwb_dev_info_type */
-	u8 length;
-	u8 data[];
-} __attribute__((packed));
-
-/**
- * UWB Identification IE
- * ECMA-368 [16.8.10]
- */
-struct uwb_identification_ie {
-	struct uwb_ie_hdr hdr;
-	struct uwb_dev_info info[];
-} __attribute__((packed));
-
-/*
- * UWB Radio Controller
- *
- * These definitions are common to the Radio Control layers as
- * exported by the WUSB1.0 HWA and WHCI interfaces.
- */
-
-/** Radio Control Command Block (WUSB1.0[Table 8-65] and WHCI 0.95) */
-struct uwb_rccb {
-	u8 bCommandType;		/* enum hwa_cet */
-	__le16 wCommand;		/* Command code */
-	u8 bCommandContext;		/* Context ID */
-} __attribute__((packed));
-
-
-/** Radio Control Event Block (WUSB[table 8-66], WHCI 0.95) */
-struct uwb_rceb {
-	u8 bEventType;			/* enum hwa_cet */
-	__le16 wEvent;			/* Event code */
-	u8 bEventContext;		/* Context ID */
-} __attribute__((packed));
-
-
-enum {
-	UWB_RC_CET_GENERAL = 0,		/* General Command/Event type */
-	UWB_RC_CET_EX_TYPE_1 = 1,	/* Extended Type 1 Command/Event type */
-};
-
-/* Commands to the radio controller */
-enum uwb_rc_cmd {
-	UWB_RC_CMD_CHANNEL_CHANGE = 16,
-	UWB_RC_CMD_DEV_ADDR_MGMT = 17,	/* Device Address Management */
-	UWB_RC_CMD_GET_IE = 18,		/* GET Information Elements */
-	UWB_RC_CMD_RESET = 19,
-	UWB_RC_CMD_SCAN = 20,		/* Scan management  */
-	UWB_RC_CMD_SET_BEACON_FILTER = 21,
-	UWB_RC_CMD_SET_DRP_IE = 22,	/* Dynamic Reservation Protocol IEs */
-	UWB_RC_CMD_SET_IE = 23,		/* Information Element management */
-	UWB_RC_CMD_SET_NOTIFICATION_FILTER = 24,
-	UWB_RC_CMD_SET_TX_POWER = 25,
-	UWB_RC_CMD_SLEEP = 26,
-	UWB_RC_CMD_START_BEACON = 27,
-	UWB_RC_CMD_STOP_BEACON = 28,
-	UWB_RC_CMD_BP_MERGE = 29,
-	UWB_RC_CMD_SEND_COMMAND_FRAME = 30,
-	UWB_RC_CMD_SET_ASIE_NOTIF = 31,
-};
-
-/* Notifications from the radio controller */
-enum uwb_rc_evt {
-	UWB_RC_EVT_IE_RCV = 0,
-	UWB_RC_EVT_BEACON = 1,
-	UWB_RC_EVT_BEACON_SIZE = 2,
-	UWB_RC_EVT_BPOIE_CHANGE = 3,
-	UWB_RC_EVT_BP_SLOT_CHANGE = 4,
-	UWB_RC_EVT_BP_SWITCH_IE_RCV = 5,
-	UWB_RC_EVT_DEV_ADDR_CONFLICT = 6,
-	UWB_RC_EVT_DRP_AVAIL = 7,
-	UWB_RC_EVT_DRP = 8,
-	UWB_RC_EVT_BP_SWITCH_STATUS = 9,
-	UWB_RC_EVT_CMD_FRAME_RCV = 10,
-	UWB_RC_EVT_CHANNEL_CHANGE_IE_RCV = 11,
-	/* Events (command responses) use the same code as the command */
-	UWB_RC_EVT_UNKNOWN_CMD_RCV = 65535,
-};
-
-enum uwb_rc_extended_type_1_cmd {
-	UWB_RC_SET_DAA_ENERGY_MASK = 32,
-	UWB_RC_SET_NOTIFICATION_FILTER_EX = 33,
-};
-
-enum uwb_rc_extended_type_1_evt {
-	UWB_RC_DAA_ENERGY_DETECTED = 0,
-};
-
-/* Radio Control Result Code. [WHCI] table 3-3. */
-enum {
-	UWB_RC_RES_SUCCESS = 0,
-	UWB_RC_RES_FAIL,
-	UWB_RC_RES_FAIL_HARDWARE,
-	UWB_RC_RES_FAIL_NO_SLOTS,
-	UWB_RC_RES_FAIL_BEACON_TOO_LARGE,
-	UWB_RC_RES_FAIL_INVALID_PARAMETER,
-	UWB_RC_RES_FAIL_UNSUPPORTED_PWR_LEVEL,
-	UWB_RC_RES_FAIL_INVALID_IE_DATA,
-	UWB_RC_RES_FAIL_BEACON_SIZE_EXCEEDED,
-	UWB_RC_RES_FAIL_CANCELLED,
-	UWB_RC_RES_FAIL_INVALID_STATE,
-	UWB_RC_RES_FAIL_INVALID_SIZE,
-	UWB_RC_RES_FAIL_ACK_NOT_RECEIVED,
-	UWB_RC_RES_FAIL_NO_MORE_ASIE_NOTIF,
-	UWB_RC_RES_FAIL_TIME_OUT = 255,
-};
-
-/* Confirm event. [WHCI] section 3.1.3.1 etc. */
-struct uwb_rc_evt_confirm {
-	struct uwb_rceb rceb;
-	u8 bResultCode;
-} __attribute__((packed));
-
-/* Device Address Management event. [WHCI] section 3.1.3.2. */
-struct uwb_rc_evt_dev_addr_mgmt {
-	struct uwb_rceb rceb;
-	u8 baAddr[6];
-	u8 bResultCode;
-} __attribute__((packed));
-
-
-/* Get IE Event. [WHCI] section 3.1.3.3. */
-struct uwb_rc_evt_get_ie {
-	struct uwb_rceb rceb;
-	__le16 wIELength;
-	u8 IEData[];
-} __attribute__((packed));
-
-/* Set DRP IE Event. [WHCI] section 3.1.3.7. */
-struct uwb_rc_evt_set_drp_ie {
-	struct uwb_rceb rceb;
-	__le16 wRemainingSpace;
-	u8 bResultCode;
-} __attribute__((packed));
-
-/* Set IE Event. [WHCI] section 3.1.3.8. */
-struct uwb_rc_evt_set_ie {
-	struct uwb_rceb rceb;
-	__le16 RemainingSpace;
-	u8 bResultCode;
-} __attribute__((packed));
-
-/* Scan command. [WHCI] 3.1.3.5. */
-struct uwb_rc_cmd_scan {
-	struct uwb_rccb rccb;
-	u8 bChannelNumber;
-	u8 bScanState;
-	__le16 wStartTime;
-} __attribute__((packed));
-
-/* Set DRP IE command. [WHCI] section 3.1.3.7. */
-struct uwb_rc_cmd_set_drp_ie {
-	struct uwb_rccb rccb;
-	__le16 wIELength;
-	struct uwb_ie_drp IEData[];
-} __attribute__((packed));
-
-/* Set IE command. [WHCI] section 3.1.3.8. */
-struct uwb_rc_cmd_set_ie {
-	struct uwb_rccb rccb;
-	__le16 wIELength;
-	u8 IEData[];
-} __attribute__((packed));
-
-/* Set DAA Energy Mask event. [WHCI 0.96] section 3.1.3.17. */
-struct uwb_rc_evt_set_daa_energy_mask {
-	struct uwb_rceb rceb;
-	__le16 wLength;
-	u8 result;
-} __attribute__((packed));
-
-/* Set Notification Filter Extended event. [WHCI 0.96] section 3.1.3.18. */
-struct uwb_rc_evt_set_notification_filter_ex {
-	struct uwb_rceb rceb;
-	__le16 wLength;
-	u8 result;
-} __attribute__((packed));
-
-/* IE Received notification. [WHCI] section 3.1.4.1. */
-struct uwb_rc_evt_ie_rcv {
-	struct uwb_rceb rceb;
-	struct uwb_dev_addr SrcAddr;
-	__le16 wIELength;
-	u8 IEData[];
-} __attribute__((packed));
-
-/* Type of the received beacon. [WHCI] section 3.1.4.2. */
-enum uwb_rc_beacon_type {
-	UWB_RC_BEACON_TYPE_SCAN = 0,
-	UWB_RC_BEACON_TYPE_NEIGHBOR,
-	UWB_RC_BEACON_TYPE_OL_ALIEN,
-	UWB_RC_BEACON_TYPE_NOL_ALIEN,
-};
-
-/* Beacon received notification. [WHCI] 3.1.4.2. */
-struct uwb_rc_evt_beacon {
-	struct uwb_rceb rceb;
-	u8	bChannelNumber;
-	u8	bBeaconType;
-	__le16	wBPSTOffset;
-	u8	bLQI;
-	u8	bRSSI;
-	__le16	wBeaconInfoLength;
-	u8	BeaconInfo[];
-} __attribute__((packed));
-
-
-/* Beacon Size Change notification. [WHCI] section 3.1.4.3 */
-struct uwb_rc_evt_beacon_size {
-	struct uwb_rceb rceb;
-	__le16 wNewBeaconSize;
-} __attribute__((packed));
-
-
-/* BPOIE Change notification. [WHCI] section 3.1.4.4. */
-struct uwb_rc_evt_bpoie_change {
-	struct uwb_rceb rceb;
-	__le16 wBPOIELength;
-	u8 BPOIE[];
-} __attribute__((packed));
-
-
-/* Beacon Slot Change notification. [WHCI] section 3.1.4.5. */
-struct uwb_rc_evt_bp_slot_change {
-	struct uwb_rceb rceb;
-	u8 slot_info;
-} __attribute__((packed));
-
-static inline int uwb_rc_evt_bp_slot_change_slot_num(
-	const struct uwb_rc_evt_bp_slot_change *evt)
-{
-	return evt->slot_info & 0x7f;
-}
-
-static inline int uwb_rc_evt_bp_slot_change_no_slot(
-	const struct uwb_rc_evt_bp_slot_change *evt)
-{
-	return (evt->slot_info & 0x80) >> 7;
-}
-
-/* BP Switch IE Received notification. [WHCI] section 3.1.4.6. */
-struct uwb_rc_evt_bp_switch_ie_rcv {
-	struct uwb_rceb rceb;
-	struct uwb_dev_addr wSrcAddr;
-	__le16 wIELength;
-	u8 IEData[];
-} __attribute__((packed));
-
-/* DevAddr Conflict notification. [WHCI] section 3.1.4.7. */
-struct uwb_rc_evt_dev_addr_conflict {
-	struct uwb_rceb rceb;
-} __attribute__((packed));
-
-/* DRP notification. [WHCI] section 3.1.4.9. */
-struct uwb_rc_evt_drp {
-	struct uwb_rceb           rceb;
-	struct uwb_dev_addr       src_addr;
-	u8                        reason;
-	u8                        beacon_slot_number;
-	__le16                    ie_length;
-	u8                        ie_data[];
-} __attribute__((packed));
-
-static inline enum uwb_drp_notif_reason uwb_rc_evt_drp_reason(struct uwb_rc_evt_drp *evt)
-{
-	return evt->reason & 0x0f;
-}
-
-
-/* DRP Availability Change notification. [WHCI] section 3.1.4.8. */
-struct uwb_rc_evt_drp_avail {
-	struct uwb_rceb rceb;
-	DECLARE_BITMAP(bmp, UWB_NUM_MAS);
-} __attribute__((packed));
-
-/* BP switch status notification. [WHCI] section 3.1.4.10. */
-struct uwb_rc_evt_bp_switch_status {
-	struct uwb_rceb rceb;
-	u8 status;
-	u8 slot_offset;
-	__le16 bpst_offset;
-	u8 move_countdown;
-} __attribute__((packed));
-
-/* Command Frame Received notification. [WHCI] section 3.1.4.11. */
-struct uwb_rc_evt_cmd_frame_rcv {
-	struct uwb_rceb rceb;
-	__le16 receive_time;
-	struct uwb_dev_addr wSrcAddr;
-	struct uwb_dev_addr wDstAddr;
-	__le16 control;
-	__le16 reserved;
-	__le16 dataLength;
-	u8 data[];
-} __attribute__((packed));
-
-/* Channel Change IE Received notification. [WHCI] section 3.1.4.12. */
-struct uwb_rc_evt_channel_change_ie_rcv {
-	struct uwb_rceb rceb;
-	struct uwb_dev_addr wSrcAddr;
-	__le16 wIELength;
-	u8 IEData[];
-} __attribute__((packed));
-
-/* DAA Energy Detected notification. [WHCI 0.96] section 3.1.4.14. */
-struct uwb_rc_evt_daa_energy_detected {
-	struct uwb_rceb rceb;
-	__le16 wLength;
-	u8 bandID;
-	u8 reserved;
-	u8 toneBmp[16];
-} __attribute__((packed));
-
-
-/**
- * Radio Control Interface Class Descriptor
- *
- *  WUSB 1.0 [8.6.1.2]
- */
-struct uwb_rc_control_intf_class_desc {
-	u8 bLength;
-	u8 bDescriptorType;
-	__le16 bcdRCIVersion;
-} __attribute__((packed));
-
-#endif /* #ifndef __LINUX__UWB_SPEC_H__ */
diff --git a/ANDROID_3.4.5/include/linux/uwb/umc.h b/ANDROID_3.4.5/include/linux/uwb/umc.h
deleted file mode 100644
index 891d1d5f..00000000
--- a/ANDROID_3.4.5/include/linux/uwb/umc.h
+++ /dev/null
@@ -1,195 +0,0 @@
-/*
- * UWB Multi-interface Controller support.
- *
- * Copyright (C) 2007 Cambridge Silicon Radio Ltd.
- *
- * This file is released under the GPLv2
- *
- * UMC (UWB Multi-interface Controller) capabilities (e.g., radio
- * controller, host controller) are presented as devices on the "umc"
- * bus.
- *
- * The radio controller is not strictly a UMC capability but it's
- * useful to present it as such.
- *
- * References:
- *
- *   [WHCI] Wireless Host Controller Interface Specification for
- *          Certified Wireless Universal Serial Bus, revision 0.95.
- *
- * How this works is kind of convoluted but simple. The whci.ko driver
- * loads when WHCI devices are detected. These WHCI devices expose
- * many devices in the same PCI function (they couldn't have reused
- * functions, no), so for each PCI function that exposes these many
- * devices, whci ceates a umc_dev [whci_probe() -> whci_add_cap()]
- * with umc_device_create() and adds it to the bus with
- * umc_device_register().
- *
- * umc_device_register() calls device_register() which will push the
- * bus management code to load your UMC driver's somehting_probe()
- * that you have registered for that capability code.
- *
- * Now when the WHCI device is removed, whci_remove() will go over
- * each umc_dev assigned to each of the PCI function's capabilities
- * and through whci_del_cap() call umc_device_unregister() each
- * created umc_dev. Of course, if you are bound to the device, your
- * driver's something_remove() will be called.
- */
-
-#ifndef _LINUX_UWB_UMC_H_
-#define _LINUX_UWB_UMC_H_
-
-#include <linux/device.h>
-#include <linux/pci.h>
-
-/*
- * UMC capability IDs.
- *
- * 0x00 is reserved so use it for the radio controller device.
- *
- * [WHCI] table 2-8
- */
-#define UMC_CAP_ID_WHCI_RC      0x00 /* radio controller */
-#define UMC_CAP_ID_WHCI_WUSB_HC 0x01 /* WUSB host controller */
-
-/**
- * struct umc_dev - UMC capability device
- *
- * @version:  version of the specification this capability conforms to.
- * @cap_id:   capability ID.
- * @bar:      PCI Bar (64 bit) where the resource lies
- * @resource: register space resource.
- * @irq:      interrupt line.
- */
-struct umc_dev {
-	u16		version;
-	u8		cap_id;
-	u8		bar;
-	struct resource resource;
-	unsigned	irq;
-	struct device	dev;
-};
-
-#define to_umc_dev(d) container_of(d, struct umc_dev, dev)
-
-/**
- * struct umc_driver - UMC capability driver
- * @cap_id: supported capability ID.
- * @match: driver specific capability matching function.
- * @match_data: driver specific data for match() (e.g., a
- * table of pci_device_id's if umc_match_pci_id() is used).
- */
-struct umc_driver {
-	char *name;
-	u8 cap_id;
-	int (*match)(struct umc_driver *, struct umc_dev *);
-	const void *match_data;
-
-	int  (*probe)(struct umc_dev *);
-	void (*remove)(struct umc_dev *);
-	int  (*suspend)(struct umc_dev *, pm_message_t state);
-	int  (*resume)(struct umc_dev *);
-	int  (*pre_reset)(struct umc_dev *);
-	int  (*post_reset)(struct umc_dev *);
-
-	struct device_driver driver;
-};
-
-#define to_umc_driver(d) container_of(d, struct umc_driver, driver)
-
-extern struct bus_type umc_bus_type;
-
-struct umc_dev *umc_device_create(struct device *parent, int n);
-int __must_check umc_device_register(struct umc_dev *umc);
-void umc_device_unregister(struct umc_dev *umc);
-
-int __must_check __umc_driver_register(struct umc_driver *umc_drv,
-				       struct module *mod,
-				       const char *mod_name);
-
-/**
- * umc_driver_register - register a UMC capabiltity driver.
- * @umc_drv:  pointer to the driver.
- */
-#define umc_driver_register(umc_drv) \
-	__umc_driver_register(umc_drv, THIS_MODULE, KBUILD_MODNAME)
-
-void umc_driver_unregister(struct umc_driver *umc_drv);
-
-/*
- * Utility function you can use to match (umc_driver->match) against a
- * null-terminated array of 'struct pci_device_id' in
- * umc_driver->match_data.
- */
-int umc_match_pci_id(struct umc_driver *umc_drv, struct umc_dev *umc);
-
-/**
- * umc_parent_pci_dev - return the UMC's parent PCI device or NULL if none
- * @umc_dev: UMC device whose parent PCI device we are looking for
- *
- * DIRTY!!! DON'T RELY ON THIS
- *
- * FIXME: This is as dirty as it gets, but we need some way to check
- * the correct type of umc_dev->parent (so that for example, we can
- * cast to pci_dev). Casting to pci_dev is necessary because at some
- * point we need to request resources from the device. Mapping is
- * easily over come (ioremap and stuff are bus agnostic), but hooking
- * up to some error handlers (such as pci error handlers) might need
- * this.
- *
- * THIS might (probably will) be removed in the future, so don't count
- * on it.
- */
-static inline struct pci_dev *umc_parent_pci_dev(struct umc_dev *umc_dev)
-{
-	struct pci_dev *pci_dev = NULL;
-	if (umc_dev->dev.parent->bus == &pci_bus_type)
-		pci_dev = to_pci_dev(umc_dev->dev.parent);
-	return pci_dev;
-}
-
-/**
- * umc_dev_get() - reference a UMC device.
- * @umc_dev: Pointer to UMC device.
- *
- * NOTE: we are assuming in this whole scheme that the parent device
- *       is referenced at _probe() time and unreferenced at _remove()
- *       time by the parent's subsystem.
- */
-static inline struct umc_dev *umc_dev_get(struct umc_dev *umc_dev)
-{
-	get_device(&umc_dev->dev);
-	return umc_dev;
-}
-
-/**
- * umc_dev_put() - unreference a UMC device.
- * @umc_dev: Pointer to UMC device.
- */
-static inline void umc_dev_put(struct umc_dev *umc_dev)
-{
-	put_device(&umc_dev->dev);
-}
-
-/**
- * umc_set_drvdata - set UMC device's driver data.
- * @umc_dev: Pointer to UMC device.
- * @data:    Data to set.
- */
-static inline void umc_set_drvdata(struct umc_dev *umc_dev, void *data)
-{
-	dev_set_drvdata(&umc_dev->dev, data);
-}
-
-/**
- * umc_get_drvdata - recover UMC device's driver data.
- * @umc_dev: Pointer to UMC device.
- */
-static inline void *umc_get_drvdata(struct umc_dev *umc_dev)
-{
-	return dev_get_drvdata(&umc_dev->dev);
-}
-
-int umc_controller_reset(struct umc_dev *umc);
-
-#endif /* #ifndef _LINUX_UWB_UMC_H_ */
diff --git a/ANDROID_3.4.5/include/linux/uwb/whci.h b/ANDROID_3.4.5/include/linux/uwb/whci.h
deleted file mode 100644
index 915ec230..00000000
--- a/ANDROID_3.4.5/include/linux/uwb/whci.h
+++ /dev/null
@@ -1,117 +0,0 @@
-/*
- * Wireless Host Controller Interface for Ultra-Wide-Band and Wireless USB
- *
- * Copyright (C) 2005-2006 Intel Corporation
- * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version
- * 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA.
- *
- *
- *
- * References:
- *   [WHCI] Wireless Host Controller Interface Specification for
- *          Certified Wireless Universal Serial Bus, revision 0.95.
- */
-#ifndef _LINUX_UWB_WHCI_H_
-#define _LINUX_UWB_WHCI_H_
-
-#include <linux/pci.h>
-
-/*
- * UWB interface capability registers (offsets from UWBBASE)
- *
- * [WHCI] section 2.2
- */
-#define UWBCAPINFO	0x00 /* == UWBCAPDATA(0) */
-#  define UWBCAPINFO_TO_N_CAPS(c)	(((c) >> 0)  & 0xFull)
-#define UWBCAPDATA(n)	(8*(n))
-#  define UWBCAPDATA_TO_VERSION(c)	(((c) >> 32) & 0xFFFFull)
-#  define UWBCAPDATA_TO_OFFSET(c)	(((c) >> 18) & 0x3FFFull)
-#  define UWBCAPDATA_TO_BAR(c)		(((c) >> 16) & 0x3ull)
-#  define UWBCAPDATA_TO_SIZE(c)		((((c) >> 8) & 0xFFull) * sizeof(u32))
-#  define UWBCAPDATA_TO_CAP_ID(c)	(((c) >> 0)  & 0xFFull)
-
-/* Size of the WHCI capability data (including the RC capability) for
-   a device with n capabilities. */
-#define UWBCAPDATA_SIZE(n) (8 + 8*(n))
-
-
-/*
- * URC registers (offsets from URCBASE)
- *
- * [WHCI] section 2.3
- */
-#define URCCMD		0x00
-#  define URCCMD_RESET		(1 << 31)  /* UMC Hardware reset */
-#  define URCCMD_RS		(1 << 30)  /* Run/Stop */
-#  define URCCMD_EARV		(1 << 29)  /* Event Address Register Valid */
-#  define URCCMD_ACTIVE		(1 << 15)  /* Command is active */
-#  define URCCMD_IWR		(1 << 14)  /* Interrupt When Ready */
-#  define URCCMD_SIZE_MASK	0x00000fff /* Command size mask */
-#define URCSTS		0x04
-#  define URCSTS_EPS		(1 << 17)  /* Event Processing Status */
-#  define URCSTS_HALTED		(1 << 16)  /* RC halted */
-#  define URCSTS_HSE		(1 << 10)  /* Host System Error...fried */
-#  define URCSTS_ER		(1 <<  9)  /* Event Ready */
-#  define URCSTS_RCI		(1 <<  8)  /* Ready for Command Interrupt */
-#  define URCSTS_INT_MASK	0x00000700 /* URC interrupt sources */
-#  define URCSTS_ISI		0x000000ff /* Interrupt Source Identification */
-#define URCINTR		0x08
-#  define URCINTR_EN_ALL	0x000007ff /* Enable all interrupt sources */
-#define URCCMDADDR	0x10
-#define URCEVTADDR	0x18
-#  define URCEVTADDR_OFFSET_MASK 0xfff    /* Event pointer offset mask */
-
-
-/** Write 32 bit @value to little endian register at @addr */
-static inline
-void le_writel(u32 value, void __iomem *addr)
-{
-	iowrite32(value, addr);
-}
-
-
-/** Read from 32 bit little endian register at @addr */
-static inline
-u32 le_readl(void __iomem *addr)
-{
-	return ioread32(addr);
-}
-
-
-/** Write 64 bit @value to little endian register at @addr */
-static inline
-void le_writeq(u64 value, void __iomem *addr)
-{
-	iowrite32(value, addr);
-	iowrite32(value >> 32, addr + 4);
-}
-
-
-/** Read from 64 bit little endian register at @addr */
-static inline
-u64 le_readq(void __iomem *addr)
-{
-	u64 value;
-	value  = ioread32(addr);
-	value |= (u64)ioread32(addr + 4) << 32;
-	return value;
-}
-
-extern int whci_wait_for(struct device *dev, u32 __iomem *reg,
-			 u32 mask, u32 result,
-			 unsigned long max_ms,  const char *tag);
-
-#endif /* #ifndef _LINUX_UWB_WHCI_H_ */
diff --git a/ANDROID_3.4.5/include/linux/v4l2-mediabus.h b/ANDROID_3.4.5/include/linux/v4l2-mediabus.h
deleted file mode 100644
index 5ea7f753..00000000
--- a/ANDROID_3.4.5/include/linux/v4l2-mediabus.h
+++ /dev/null
@@ -1,114 +0,0 @@
-/*
- * Media Bus API header
- *
- * Copyright (C) 2009, Guennadi Liakhovetski <g.liakhovetski@gmx.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __LINUX_V4L2_MEDIABUS_H
-#define __LINUX_V4L2_MEDIABUS_H
-
-#include <linux/types.h>
-#include <linux/videodev2.h>
-
-/*
- * These pixel codes uniquely identify data formats on the media bus. Mostly
- * they correspond to similarly named V4L2_PIX_FMT_* formats, format 0 is
- * reserved, V4L2_MBUS_FMT_FIXED shall be used by host-client pairs, where the
- * data format is fixed. Additionally, "2X8" means that one pixel is transferred
- * in two 8-bit samples, "BE" or "LE" specify in which order those samples are
- * transferred over the bus: "LE" means that the least significant bits are
- * transferred first, "BE" means that the most significant bits are transferred
- * first, and "PADHI" and "PADLO" define which bits - low or high, in the
- * incomplete high byte, are filled with padding bits.
- *
- * The pixel codes are grouped by type, bus_width, bits per component, samples
- * per pixel and order of subsamples. Numerical values are sorted using generic
- * numerical sort order (8 thus comes before 10).
- *
- * As their value can't change when a new pixel code is inserted in the
- * enumeration, the pixel codes are explicitly given a numerical value. The next
- * free values for each category are listed below, update them when inserting
- * new pixel codes.
- */
-enum v4l2_mbus_pixelcode {
-	V4L2_MBUS_FMT_FIXED = 0x0001,
-
-	/* RGB - next is 0x1009 */
-	V4L2_MBUS_FMT_RGB444_2X8_PADHI_BE = 0x1001,
-	V4L2_MBUS_FMT_RGB444_2X8_PADHI_LE = 0x1002,
-	V4L2_MBUS_FMT_RGB555_2X8_PADHI_BE = 0x1003,
-	V4L2_MBUS_FMT_RGB555_2X8_PADHI_LE = 0x1004,
-	V4L2_MBUS_FMT_BGR565_2X8_BE = 0x1005,
-	V4L2_MBUS_FMT_BGR565_2X8_LE = 0x1006,
-	V4L2_MBUS_FMT_RGB565_2X8_BE = 0x1007,
-	V4L2_MBUS_FMT_RGB565_2X8_LE = 0x1008,
-
-	/* YUV (including grey) - next is 0x2014 */
-	V4L2_MBUS_FMT_Y8_1X8 = 0x2001,
-	V4L2_MBUS_FMT_UYVY8_1_5X8 = 0x2002,
-	V4L2_MBUS_FMT_VYUY8_1_5X8 = 0x2003,
-	V4L2_MBUS_FMT_YUYV8_1_5X8 = 0x2004,
-	V4L2_MBUS_FMT_YVYU8_1_5X8 = 0x2005,
-	V4L2_MBUS_FMT_UYVY8_2X8 = 0x2006,
-	V4L2_MBUS_FMT_VYUY8_2X8 = 0x2007,
-	V4L2_MBUS_FMT_YUYV8_2X8 = 0x2008,
-	V4L2_MBUS_FMT_YVYU8_2X8 = 0x2009,
-	V4L2_MBUS_FMT_Y10_1X10 = 0x200a,
-	V4L2_MBUS_FMT_YUYV10_2X10 = 0x200b,
-	V4L2_MBUS_FMT_YVYU10_2X10 = 0x200c,
-	V4L2_MBUS_FMT_Y12_1X12 = 0x2013,
-	V4L2_MBUS_FMT_UYVY8_1X16 = 0x200f,
-	V4L2_MBUS_FMT_VYUY8_1X16 = 0x2010,
-	V4L2_MBUS_FMT_YUYV8_1X16 = 0x2011,
-	V4L2_MBUS_FMT_YVYU8_1X16 = 0x2012,
-	V4L2_MBUS_FMT_YUYV10_1X20 = 0x200d,
-	V4L2_MBUS_FMT_YVYU10_1X20 = 0x200e,
-
-	/* Bayer - next is 0x3015 */
-	V4L2_MBUS_FMT_SBGGR8_1X8 = 0x3001,
-	V4L2_MBUS_FMT_SGBRG8_1X8 = 0x3013,
-	V4L2_MBUS_FMT_SGRBG8_1X8 = 0x3002,
-	V4L2_MBUS_FMT_SRGGB8_1X8 = 0x3014,
-	V4L2_MBUS_FMT_SBGGR10_DPCM8_1X8 = 0x300b,
-	V4L2_MBUS_FMT_SGBRG10_DPCM8_1X8 = 0x300c,
-	V4L2_MBUS_FMT_SGRBG10_DPCM8_1X8 = 0x3009,
-	V4L2_MBUS_FMT_SRGGB10_DPCM8_1X8 = 0x300d,
-	V4L2_MBUS_FMT_SBGGR10_2X8_PADHI_BE = 0x3003,
-	V4L2_MBUS_FMT_SBGGR10_2X8_PADHI_LE = 0x3004,
-	V4L2_MBUS_FMT_SBGGR10_2X8_PADLO_BE = 0x3005,
-	V4L2_MBUS_FMT_SBGGR10_2X8_PADLO_LE = 0x3006,
-	V4L2_MBUS_FMT_SBGGR10_1X10 = 0x3007,
-	V4L2_MBUS_FMT_SGBRG10_1X10 = 0x300e,
-	V4L2_MBUS_FMT_SGRBG10_1X10 = 0x300a,
-	V4L2_MBUS_FMT_SRGGB10_1X10 = 0x300f,
-	V4L2_MBUS_FMT_SBGGR12_1X12 = 0x3008,
-	V4L2_MBUS_FMT_SGBRG12_1X12 = 0x3010,
-	V4L2_MBUS_FMT_SGRBG12_1X12 = 0x3011,
-	V4L2_MBUS_FMT_SRGGB12_1X12 = 0x3012,
-
-	/* JPEG compressed formats - next is 0x4002 */
-	V4L2_MBUS_FMT_JPEG_1X8 = 0x4001,
-};
-
-/**
- * struct v4l2_mbus_framefmt - frame format on the media bus
- * @width:	frame width
- * @height:	frame height
- * @code:	data format code (from enum v4l2_mbus_pixelcode)
- * @field:	used interlacing type (from enum v4l2_field)
- * @colorspace:	colorspace of the data (from enum v4l2_colorspace)
- */
-struct v4l2_mbus_framefmt {
-	__u32			width;
-	__u32			height;
-	__u32			code;
-	__u32			field;
-	__u32			colorspace;
-	__u32			reserved[7];
-};
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/v4l2-subdev.h b/ANDROID_3.4.5/include/linux/v4l2-subdev.h
deleted file mode 100644
index ed29cbbe..00000000
--- a/ANDROID_3.4.5/include/linux/v4l2-subdev.h
+++ /dev/null
@@ -1,141 +0,0 @@
-/*
- * V4L2 subdev userspace API
- *
- * Copyright (C) 2010 Nokia Corporation
- *
- * Contacts: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
- *	     Sakari Ailus <sakari.ailus@iki.fi>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __LINUX_V4L2_SUBDEV_H
-#define __LINUX_V4L2_SUBDEV_H
-
-#include <linux/ioctl.h>
-#include <linux/types.h>
-#include <linux/v4l2-mediabus.h>
-
-/**
- * enum v4l2_subdev_format_whence - Media bus format type
- * @V4L2_SUBDEV_FORMAT_TRY: try format, for negotiation only
- * @V4L2_SUBDEV_FORMAT_ACTIVE: active format, applied to the device
- */
-enum v4l2_subdev_format_whence {
-	V4L2_SUBDEV_FORMAT_TRY = 0,
-	V4L2_SUBDEV_FORMAT_ACTIVE = 1,
-};
-
-/**
- * struct v4l2_subdev_format - Pad-level media bus format
- * @which: format type (from enum v4l2_subdev_format_whence)
- * @pad: pad number, as reported by the media API
- * @format: media bus format (format code and frame size)
- */
-struct v4l2_subdev_format {
-	__u32 which;
-	__u32 pad;
-	struct v4l2_mbus_framefmt format;
-	__u32 reserved[8];
-};
-
-/**
- * struct v4l2_subdev_crop - Pad-level crop settings
- * @which: format type (from enum v4l2_subdev_format_whence)
- * @pad: pad number, as reported by the media API
- * @rect: pad crop rectangle boundaries
- */
-struct v4l2_subdev_crop {
-	__u32 which;
-	__u32 pad;
-	struct v4l2_rect rect;
-	__u32 reserved[8];
-};
-
-/**
- * struct v4l2_subdev_mbus_code_enum - Media bus format enumeration
- * @pad: pad number, as reported by the media API
- * @index: format index during enumeration
- * @code: format code (from enum v4l2_mbus_pixelcode)
- */
-struct v4l2_subdev_mbus_code_enum {
-	__u32 pad;
-	__u32 index;
-	__u32 code;
-	__u32 reserved[9];
-};
-
-/**
- * struct v4l2_subdev_frame_size_enum - Media bus format enumeration
- * @pad: pad number, as reported by the media API
- * @index: format index during enumeration
- * @code: format code (from enum v4l2_mbus_pixelcode)
- */
-struct v4l2_subdev_frame_size_enum {
-	__u32 index;
-	__u32 pad;
-	__u32 code;
-	__u32 min_width;
-	__u32 max_width;
-	__u32 min_height;
-	__u32 max_height;
-	__u32 reserved[9];
-};
-
-/**
- * struct v4l2_subdev_frame_interval - Pad-level frame rate
- * @pad: pad number, as reported by the media API
- * @interval: frame interval in seconds
- */
-struct v4l2_subdev_frame_interval {
-	__u32 pad;
-	struct v4l2_fract interval;
-	__u32 reserved[9];
-};
-
-/**
- * struct v4l2_subdev_frame_interval_enum - Frame interval enumeration
- * @pad: pad number, as reported by the media API
- * @index: frame interval index during enumeration
- * @code: format code (from enum v4l2_mbus_pixelcode)
- * @width: frame width in pixels
- * @height: frame height in pixels
- * @interval: frame interval in seconds
- */
-struct v4l2_subdev_frame_interval_enum {
-	__u32 index;
-	__u32 pad;
-	__u32 code;
-	__u32 width;
-	__u32 height;
-	struct v4l2_fract interval;
-	__u32 reserved[9];
-};
-
-#define VIDIOC_SUBDEV_G_FMT	_IOWR('V',  4, struct v4l2_subdev_format)
-#define VIDIOC_SUBDEV_S_FMT	_IOWR('V',  5, struct v4l2_subdev_format)
-#define VIDIOC_SUBDEV_G_FRAME_INTERVAL \
-			_IOWR('V', 21, struct v4l2_subdev_frame_interval)
-#define VIDIOC_SUBDEV_S_FRAME_INTERVAL \
-			_IOWR('V', 22, struct v4l2_subdev_frame_interval)
-#define VIDIOC_SUBDEV_ENUM_MBUS_CODE \
-			_IOWR('V',  2, struct v4l2_subdev_mbus_code_enum)
-#define VIDIOC_SUBDEV_ENUM_FRAME_SIZE \
-			_IOWR('V', 74, struct v4l2_subdev_frame_size_enum)
-#define VIDIOC_SUBDEV_ENUM_FRAME_INTERVAL \
-			_IOWR('V', 75, struct v4l2_subdev_frame_interval_enum)
-#define VIDIOC_SUBDEV_G_CROP	_IOWR('V', 59, struct v4l2_subdev_crop)
-#define VIDIOC_SUBDEV_S_CROP	_IOWR('V', 60, struct v4l2_subdev_crop)
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/vermagic.h b/ANDROID_3.4.5/include/linux/vermagic.h
deleted file mode 100644
index 6f8fbcf1..00000000
--- a/ANDROID_3.4.5/include/linux/vermagic.h
+++ /dev/null
@@ -1,33 +0,0 @@
-#include <generated/utsrelease.h>
-
-/* Simply sanity version stamp for modules. */
-#ifdef CONFIG_SMP
-#define MODULE_VERMAGIC_SMP "SMP "
-#else
-#define MODULE_VERMAGIC_SMP ""
-#endif
-#ifdef CONFIG_PREEMPT
-#define MODULE_VERMAGIC_PREEMPT "preempt "
-#else
-#define MODULE_VERMAGIC_PREEMPT ""
-#endif
-#ifdef CONFIG_MODULE_UNLOAD
-#define MODULE_VERMAGIC_MODULE_UNLOAD "mod_unload "
-#else
-#define MODULE_VERMAGIC_MODULE_UNLOAD ""
-#endif
-#ifdef CONFIG_MODVERSIONS
-#define MODULE_VERMAGIC_MODVERSIONS "modversions "
-#else
-#define MODULE_VERMAGIC_MODVERSIONS ""
-#endif
-#ifndef MODULE_ARCH_VERMAGIC
-#define MODULE_ARCH_VERMAGIC ""
-#endif
-
-#define VERMAGIC_STRING 						\
-	UTS_RELEASE " "							\
-	MODULE_VERMAGIC_SMP MODULE_VERMAGIC_PREEMPT 			\
-	MODULE_VERMAGIC_MODULE_UNLOAD MODULE_VERMAGIC_MODVERSIONS	\
-	MODULE_ARCH_VERMAGIC
-
diff --git a/ANDROID_3.4.5/include/linux/veth.h b/ANDROID_3.4.5/include/linux/veth.h
deleted file mode 100644
index 3354c1eb..00000000
--- a/ANDROID_3.4.5/include/linux/veth.h
+++ /dev/null
@@ -1,12 +0,0 @@
-#ifndef __NET_VETH_H_
-#define __NET_VETH_H_
-
-enum {
-	VETH_INFO_UNSPEC,
-	VETH_INFO_PEER,
-
-	__VETH_INFO_MAX
-#define VETH_INFO_MAX	(__VETH_INFO_MAX - 1)
-};
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/vfs.h b/ANDROID_3.4.5/include/linux/vfs.h
deleted file mode 100644
index e701d054..00000000
--- a/ANDROID_3.4.5/include/linux/vfs.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _LINUX_VFS_H
-#define _LINUX_VFS_H
-
-#include <linux/statfs.h>
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/vga_switcheroo.h b/ANDROID_3.4.5/include/linux/vga_switcheroo.h
deleted file mode 100644
index 4b9a7f59..00000000
--- a/ANDROID_3.4.5/include/linux/vga_switcheroo.h
+++ /dev/null
@@ -1,59 +0,0 @@
-/*
- * Copyright (c) 2010 Red Hat Inc.
- * Author : Dave Airlie <airlied@redhat.com>
- *
- * Licensed under GPLv2
- *
- * vga_switcheroo.h - Support for laptop with dual GPU using one set of outputs
- */
-
-#include <linux/fb.h>
-
-enum vga_switcheroo_state {
-	VGA_SWITCHEROO_OFF,
-	VGA_SWITCHEROO_ON,
-};
-
-enum vga_switcheroo_client_id {
-	VGA_SWITCHEROO_IGD,
-	VGA_SWITCHEROO_DIS,
-	VGA_SWITCHEROO_MAX_CLIENTS,
-};
-
-struct vga_switcheroo_handler {
-	int (*switchto)(enum vga_switcheroo_client_id id);
-	int (*power_state)(enum vga_switcheroo_client_id id,
-			   enum vga_switcheroo_state state);
-	int (*init)(void);
-	int (*get_client_id)(struct pci_dev *pdev);
-};
-
-
-#if defined(CONFIG_VGA_SWITCHEROO)
-void vga_switcheroo_unregister_client(struct pci_dev *dev);
-int vga_switcheroo_register_client(struct pci_dev *dev,
-				   void (*set_gpu_state)(struct pci_dev *dev, enum vga_switcheroo_state),
-				   void (*reprobe)(struct pci_dev *dev),
-				   bool (*can_switch)(struct pci_dev *dev));
-
-void vga_switcheroo_client_fb_set(struct pci_dev *dev,
-				  struct fb_info *info);
-
-int vga_switcheroo_register_handler(struct vga_switcheroo_handler *handler);
-void vga_switcheroo_unregister_handler(void);
-
-int vga_switcheroo_process_delayed_switch(void);
-
-#else
-
-static inline void vga_switcheroo_unregister_client(struct pci_dev *dev) {}
-static inline int vga_switcheroo_register_client(struct pci_dev *dev,
-					  void (*set_gpu_state)(struct pci_dev *dev, enum vga_switcheroo_state),
-					  void (*reprobe)(struct pci_dev *dev),
-					  bool (*can_switch)(struct pci_dev *dev)) { return 0; }
-static inline void vga_switcheroo_client_fb_set(struct pci_dev *dev, struct fb_info *info) {}
-static inline int vga_switcheroo_register_handler(struct vga_switcheroo_handler *handler) { return 0; }
-static inline void vga_switcheroo_unregister_handler(void) {}
-static inline int vga_switcheroo_process_delayed_switch(void) { return 0; }
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/vgaarb.h b/ANDROID_3.4.5/include/linux/vgaarb.h
deleted file mode 100644
index b572f80b..00000000
--- a/ANDROID_3.4.5/include/linux/vgaarb.h
+++ /dev/null
@@ -1,244 +0,0 @@
-/*
- * The VGA aribiter manages VGA space routing and VGA resource decode to
- * allow multiple VGA devices to be used in a system in a safe way.
- *
- * (C) Copyright 2005 Benjamin Herrenschmidt <benh@kernel.crashing.org>
- * (C) Copyright 2007 Paulo R. Zanoni <przanoni@gmail.com>
- * (C) Copyright 2007, 2009 Tiago Vignatti <vignatti@freedesktop.org>
- *
- * Permission is hereby granted, free of charge, to any person obtaining a
- * copy of this software and associated documentation files (the "Software"),
- * to deal in the Software without restriction, including without limitation
- * the rights to use, copy, modify, merge, publish, distribute, sublicense,
- * and/or sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice (including the next
- * paragraph) shall be included in all copies or substantial portions of the
- * Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
- * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
- * DEALINGS
- * IN THE SOFTWARE.
- *
- */
-
-#ifndef LINUX_VGA_H
-#define LINUX_VGA_H
-
-
-/* Legacy VGA regions */
-#define VGA_RSRC_NONE	       0x00
-#define VGA_RSRC_LEGACY_IO     0x01
-#define VGA_RSRC_LEGACY_MEM    0x02
-#define VGA_RSRC_LEGACY_MASK   (VGA_RSRC_LEGACY_IO | VGA_RSRC_LEGACY_MEM)
-/* Non-legacy access */
-#define VGA_RSRC_NORMAL_IO     0x04
-#define VGA_RSRC_NORMAL_MEM    0x08
-
-/* Passing that instead of a pci_dev to use the system "default"
- * device, that is the one used by vgacon. Archs will probably
- * have to provide their own vga_default_device();
- */
-#define VGA_DEFAULT_DEVICE     (NULL)
-
-struct pci_dev;
-
-/* For use by clients */
-
-/**
- *     vga_set_legacy_decoding
- *
- *     @pdev: pci device of the VGA card
- *     @decodes: bit mask of what legacy regions the card decodes
- *
- *     Indicates to the arbiter if the card decodes legacy VGA IOs,
- *     legacy VGA Memory, both, or none. All cards default to both,
- *     the card driver (fbdev for example) should tell the arbiter
- *     if it has disabled legacy decoding, so the card can be left
- *     out of the arbitration process (and can be safe to take
- *     interrupts at any time.
- */
-extern void vga_set_legacy_decoding(struct pci_dev *pdev,
-				    unsigned int decodes);
-
-/**
- *     vga_get         - acquire & locks VGA resources
- *
- *     @pdev: pci device of the VGA card or NULL for the system default
- *     @rsrc: bit mask of resources to acquire and lock
- *     @interruptible: blocking should be interruptible by signals ?
- *
- *     This function acquires VGA resources for the given
- *     card and mark those resources locked. If the resource requested
- *     are "normal" (and not legacy) resources, the arbiter will first check
- *     wether the card is doing legacy decoding for that type of resource. If
- *     yes, the lock is "converted" into a legacy resource lock.
- *     The arbiter will first look for all VGA cards that might conflict
- *     and disable their IOs and/or Memory access, including VGA forwarding
- *     on P2P bridges if necessary, so that the requested resources can
- *     be used. Then, the card is marked as locking these resources and
- *     the IO and/or Memory accesse are enabled on the card (including
- *     VGA forwarding on parent P2P bridges if any).
- *     This function will block if some conflicting card is already locking
- *     one of the required resources (or any resource on a different bus
- *     segment, since P2P bridges don't differenciate VGA memory and IO
- *     afaik). You can indicate wether this blocking should be interruptible
- *     by a signal (for userland interface) or not.
- *     Must not be called at interrupt time or in atomic context.
- *     If the card already owns the resources, the function succeeds.
- *     Nested calls are supported (a per-resource counter is maintained)
- */
-
-#if defined(CONFIG_VGA_ARB)
-extern int vga_get(struct pci_dev *pdev, unsigned int rsrc, int interruptible);
-#else
-static inline int vga_get(struct pci_dev *pdev, unsigned int rsrc, int interruptible) { return 0; }
-#endif
-
-/**
- *     vga_get_interruptible
- *
- *     Shortcut to vga_get
- */
-
-static inline int vga_get_interruptible(struct pci_dev *pdev,
-					unsigned int rsrc)
-{
-       return vga_get(pdev, rsrc, 1);
-}
-
-/**
- *     vga_get_uninterruptible
- *
- *     Shortcut to vga_get
- */
-
-static inline int vga_get_uninterruptible(struct pci_dev *pdev,
-					  unsigned int rsrc)
-{
-       return vga_get(pdev, rsrc, 0);
-}
-
-/**
- *     vga_tryget      - try to acquire & lock legacy VGA resources
- *
- *     @pdev: pci devivce of VGA card or NULL for system default
- *     @rsrc: bit mask of resources to acquire and lock
- *
- *     This function performs the same operation as vga_get(), but
- *     will return an error (-EBUSY) instead of blocking if the resources
- *     are already locked by another card. It can be called in any context
- */
-
-#if defined(CONFIG_VGA_ARB)
-extern int vga_tryget(struct pci_dev *pdev, unsigned int rsrc);
-#else
-static inline int vga_tryget(struct pci_dev *pdev, unsigned int rsrc) { return 0; }
-#endif
-
-/**
- *     vga_put         - release lock on legacy VGA resources
- *
- *     @pdev: pci device of VGA card or NULL for system default
- *     @rsrc: but mask of resource to release
- *
- *     This function releases resources previously locked by vga_get()
- *     or vga_tryget(). The resources aren't disabled right away, so
- *     that a subsequence vga_get() on the same card will succeed
- *     immediately. Resources have a counter, so locks are only
- *     released if the counter reaches 0.
- */
-
-#if defined(CONFIG_VGA_ARB)
-extern void vga_put(struct pci_dev *pdev, unsigned int rsrc);
-#else
-#define vga_put(pdev, rsrc)
-#endif
-
-
-/**
- *     vga_default_device
- *
- *     This can be defined by the platform. The default implementation
- *     is rather dumb and will probably only work properly on single
- *     vga card setups and/or x86 platforms.
- *
- *     If your VGA default device is not PCI, you'll have to return
- *     NULL here. In this case, I assume it will not conflict with
- *     any PCI card. If this is not true, I'll have to define two archs
- *     hooks for enabling/disabling the VGA default device if that is
- *     possible. This may be a problem with real _ISA_ VGA cards, in
- *     addition to a PCI one. I don't know at this point how to deal
- *     with that card. Can theirs IOs be disabled at all ? If not, then
- *     I suppose it's a matter of having the proper arch hook telling
- *     us about it, so we basically never allow anybody to succeed a
- *     vga_get()...
- */
-
-#ifndef __ARCH_HAS_VGA_DEFAULT_DEVICE
-extern struct pci_dev *vga_default_device(void);
-#endif
-
-/**
- *     vga_conflicts
- *
- *     Architectures should define this if they have several
- *     independent PCI domains that can afford concurrent VGA
- *     decoding
- */
-
-#ifndef __ARCH_HAS_VGA_CONFLICT
-static inline int vga_conflicts(struct pci_dev *p1, struct pci_dev *p2)
-{
-       return 1;
-}
-#endif
-
-/**
- *	vga_client_register
- *
- *	@pdev: pci device of the VGA client
- *	@cookie: client cookie to be used in callbacks
- *	@irq_set_state: irq state change callback
- *	@set_vga_decode: vga decode change callback
- *
- * 	return value: 0 on success, -1 on failure
- * 	Register a client with the VGA arbitration logic
- *
- *	Clients have two callback mechanisms they can use.
- *	irq enable/disable callback -
- *		If a client can't disable its GPUs VGA resources, then we
- *		need to be able to ask it to turn off its irqs when we
- *		turn off its mem and io decoding.
- *	set_vga_decode
- *		If a client can disable its GPU VGA resource, it will
- *		get a callback from this to set the encode/decode state
- *
- * Rationale: we cannot disable VGA decode resources unconditionally
- * some single GPU laptops seem to require ACPI or BIOS access to the
- * VGA registers to control things like backlights etc.
- * Hopefully newer multi-GPU laptops do something saner, and desktops
- * won't have any special ACPI for this.
- * They driver will get a callback when VGA arbitration is first used
- * by userspace since we some older X servers have issues.
- */
-#if defined(CONFIG_VGA_ARB)
-int vga_client_register(struct pci_dev *pdev, void *cookie,
-			void (*irq_set_state)(void *cookie, bool state),
-			unsigned int (*set_vga_decode)(void *cookie, bool state));
-#else
-static inline int vga_client_register(struct pci_dev *pdev, void *cookie,
-				      void (*irq_set_state)(void *cookie, bool state),
-				      unsigned int (*set_vga_decode)(void *cookie, bool state))
-{
-	return 0;
-}
-#endif
-
-#endif /* LINUX_VGA_H */
diff --git a/ANDROID_3.4.5/include/linux/vhost.h b/ANDROID_3.4.5/include/linux/vhost.h
deleted file mode 100644
index e847f1e3..00000000
--- a/ANDROID_3.4.5/include/linux/vhost.h
+++ /dev/null
@@ -1,130 +0,0 @@
-#ifndef _LINUX_VHOST_H
-#define _LINUX_VHOST_H
-/* Userspace interface for in-kernel virtio accelerators. */
-
-/* vhost is used to reduce the number of system calls involved in virtio.
- *
- * Existing virtio net code is used in the guest without modification.
- *
- * This header includes interface used by userspace hypervisor for
- * device configuration.
- */
-
-#include <linux/types.h>
-#include <linux/compiler.h>
-#include <linux/ioctl.h>
-#include <linux/virtio_config.h>
-#include <linux/virtio_ring.h>
-
-struct vhost_vring_state {
-	unsigned int index;
-	unsigned int num;
-};
-
-struct vhost_vring_file {
-	unsigned int index;
-	int fd; /* Pass -1 to unbind from file. */
-
-};
-
-struct vhost_vring_addr {
-	unsigned int index;
-	/* Option flags. */
-	unsigned int flags;
-	/* Flag values: */
-	/* Whether log address is valid. If set enables logging. */
-#define VHOST_VRING_F_LOG 0
-
-	/* Start of array of descriptors (virtually contiguous) */
-	__u64 desc_user_addr;
-	/* Used structure address. Must be 32 bit aligned */
-	__u64 used_user_addr;
-	/* Available structure address. Must be 16 bit aligned */
-	__u64 avail_user_addr;
-	/* Logging support. */
-	/* Log writes to used structure, at offset calculated from specified
-	 * address. Address must be 32 bit aligned. */
-	__u64 log_guest_addr;
-};
-
-struct vhost_memory_region {
-	__u64 guest_phys_addr;
-	__u64 memory_size; /* bytes */
-	__u64 userspace_addr;
-	__u64 flags_padding; /* No flags are currently specified. */
-};
-
-/* All region addresses and sizes must be 4K aligned. */
-#define VHOST_PAGE_SIZE 0x1000
-
-struct vhost_memory {
-	__u32 nregions;
-	__u32 padding;
-	struct vhost_memory_region regions[0];
-};
-
-/* ioctls */
-
-#define VHOST_VIRTIO 0xAF
-
-/* Features bitmask for forward compatibility.  Transport bits are used for
- * vhost specific features. */
-#define VHOST_GET_FEATURES	_IOR(VHOST_VIRTIO, 0x00, __u64)
-#define VHOST_SET_FEATURES	_IOW(VHOST_VIRTIO, 0x00, __u64)
-
-/* Set current process as the (exclusive) owner of this file descriptor.  This
- * must be called before any other vhost command.  Further calls to
- * VHOST_OWNER_SET fail until VHOST_OWNER_RESET is called. */
-#define VHOST_SET_OWNER _IO(VHOST_VIRTIO, 0x01)
-/* Give up ownership, and reset the device to default values.
- * Allows subsequent call to VHOST_OWNER_SET to succeed. */
-#define VHOST_RESET_OWNER _IO(VHOST_VIRTIO, 0x02)
-
-/* Set up/modify memory layout */
-#define VHOST_SET_MEM_TABLE	_IOW(VHOST_VIRTIO, 0x03, struct vhost_memory)
-
-/* Write logging setup. */
-/* Memory writes can optionally be logged by setting bit at an offset
- * (calculated from the physical address) from specified log base.
- * The bit is set using an atomic 32 bit operation. */
-/* Set base address for logging. */
-#define VHOST_SET_LOG_BASE _IOW(VHOST_VIRTIO, 0x04, __u64)
-/* Specify an eventfd file descriptor to signal on log write. */
-#define VHOST_SET_LOG_FD _IOW(VHOST_VIRTIO, 0x07, int)
-
-/* Ring setup. */
-/* Set number of descriptors in ring. This parameter can not
- * be modified while ring is running (bound to a device). */
-#define VHOST_SET_VRING_NUM _IOW(VHOST_VIRTIO, 0x10, struct vhost_vring_state)
-/* Set addresses for the ring. */
-#define VHOST_SET_VRING_ADDR _IOW(VHOST_VIRTIO, 0x11, struct vhost_vring_addr)
-/* Base value where queue looks for available descriptors */
-#define VHOST_SET_VRING_BASE _IOW(VHOST_VIRTIO, 0x12, struct vhost_vring_state)
-/* Get accessor: reads index, writes value in num */
-#define VHOST_GET_VRING_BASE _IOWR(VHOST_VIRTIO, 0x12, struct vhost_vring_state)
-
-/* The following ioctls use eventfd file descriptors to signal and poll
- * for events. */
-
-/* Set eventfd to poll for added buffers */
-#define VHOST_SET_VRING_KICK _IOW(VHOST_VIRTIO, 0x20, struct vhost_vring_file)
-/* Set eventfd to signal when buffers have beed used */
-#define VHOST_SET_VRING_CALL _IOW(VHOST_VIRTIO, 0x21, struct vhost_vring_file)
-/* Set eventfd to signal an error */
-#define VHOST_SET_VRING_ERR _IOW(VHOST_VIRTIO, 0x22, struct vhost_vring_file)
-
-/* VHOST_NET specific defines */
-
-/* Attach virtio net ring to a raw socket, or tap device.
- * The socket must be already bound to an ethernet device, this device will be
- * used for transmit.  Pass fd -1 to unbind from the socket and the transmit
- * device.  This can be used to stop the ring (e.g. for migration). */
-#define VHOST_NET_SET_BACKEND _IOW(VHOST_VIRTIO, 0x30, struct vhost_vring_file)
-
-/* Feature bits */
-/* Log all write descriptors. Can be changed while device is active. */
-#define VHOST_F_LOG_ALL 26
-/* vhost-net should add virtio_net_hdr for RX, and strip for TX packets. */
-#define VHOST_NET_F_VIRTIO_NET_HDR 27
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/via-core.h b/ANDROID_3.4.5/include/linux/via-core.h
deleted file mode 100644
index 9c21cdf3..00000000
--- a/ANDROID_3.4.5/include/linux/via-core.h
+++ /dev/null
@@ -1,236 +0,0 @@
-/*
- * Copyright 1998-2009 VIA Technologies, Inc. All Rights Reserved.
- * Copyright 2001-2008 S3 Graphics, Inc. All Rights Reserved.
- * Copyright 2009-2010 Jonathan Corbet <corbet@lwn.net>
- * Copyright 2010 Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public
- * License as published by the Free Software Foundation;
- * either version 2, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTIES OR REPRESENTATIONS; without even
- * the implied warranty of MERCHANTABILITY or FITNESS FOR
- * A PARTICULAR PURPOSE.See the GNU General Public License
- * for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc.,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- */
-
-#ifndef __VIA_CORE_H__
-#define __VIA_CORE_H__
-#include <linux/types.h>
-#include <linux/io.h>
-#include <linux/spinlock.h>
-#include <linux/pci.h>
-
-/*
- * A description of each known serial I2C/GPIO port.
- */
-enum via_port_type {
-	VIA_PORT_NONE = 0,
-	VIA_PORT_I2C,
-	VIA_PORT_GPIO,
-};
-
-enum via_port_mode {
-	VIA_MODE_OFF = 0,
-	VIA_MODE_I2C,		/* Used as I2C port */
-	VIA_MODE_GPIO,	/* Two GPIO ports */
-};
-
-enum viafb_i2c_adap {
-	VIA_PORT_26 = 0,
-	VIA_PORT_31,
-	VIA_PORT_25,
-	VIA_PORT_2C,
-	VIA_PORT_3D,
-};
-#define VIAFB_NUM_PORTS 5
-
-struct via_port_cfg {
-	enum via_port_type	type;
-	enum via_port_mode	mode;
-	u16			io_port;
-	u8			ioport_index;
-};
-
-/*
- * Allow subdevs to register suspend/resume hooks.
- */
-#ifdef CONFIG_PM
-struct viafb_pm_hooks {
-	struct list_head list;
-	int (*suspend)(void *private);
-	int (*resume)(void *private);
-	void *private;
-};
-
-void viafb_pm_register(struct viafb_pm_hooks *hooks);
-void viafb_pm_unregister(struct viafb_pm_hooks *hooks);
-#endif /* CONFIG_PM */
-
-/*
- * This is the global viafb "device" containing stuff needed by
- * all subdevs.
- */
-struct viafb_dev {
-	struct pci_dev *pdev;
-	int chip_type;
-	struct via_port_cfg *port_cfg;
-	/*
-	 * Spinlock for access to device registers.  Not yet
-	 * globally used.
-	 */
-	spinlock_t reg_lock;
-	/*
-	 * The framebuffer MMIO region.  Little, if anything, touches
-	 * this memory directly, and certainly nothing outside of the
-	 * framebuffer device itself.  We *do* have to be able to allocate
-	 * chunks of this memory for other devices, though.
-	 */
-	unsigned long fbmem_start;
-	long fbmem_len;
-	void __iomem *fbmem;
-#if defined(CONFIG_VIDEO_VIA_CAMERA) || defined(CONFIG_VIDEO_VIA_CAMERA_MODULE)
-	long camera_fbmem_offset;
-	long camera_fbmem_size;
-#endif
-	/*
-	 * The MMIO region for device registers.
-	 */
-	unsigned long engine_start;
-	unsigned long engine_len;
-	void __iomem *engine_mmio;
-
-};
-
-/*
- * Interrupt management.
- */
-
-void viafb_irq_enable(u32 mask);
-void viafb_irq_disable(u32 mask);
-
-/*
- * The global interrupt control register and its bits.
- */
-#define VDE_INTERRUPT	0x200	/* Video interrupt flags/masks */
-#define   VDE_I_DVISENSE  0x00000001  /* DVI sense int status */
-#define   VDE_I_VBLANK    0x00000002  /* Vertical blank status */
-#define   VDE_I_MCCFI	  0x00000004  /* MCE compl. frame int status */
-#define   VDE_I_VSYNC	  0x00000008  /* VGA VSYNC int status */
-#define   VDE_I_DMA0DDONE 0x00000010  /* DMA 0 descr done */
-#define   VDE_I_DMA0TDONE 0x00000020  /* DMA 0 transfer done */
-#define   VDE_I_DMA1DDONE 0x00000040  /* DMA 1 descr done */
-#define   VDE_I_DMA1TDONE 0x00000080  /* DMA 1 transfer done */
-#define   VDE_I_C1AV      0x00000100  /* Cap Eng 1 act vid end */
-#define   VDE_I_HQV0	  0x00000200  /* First HQV engine */
-#define   VDE_I_HQV1      0x00000400  /* Second HQV engine */
-#define   VDE_I_HQV1EN	  0x00000800  /* Second HQV engine enable */
-#define   VDE_I_C0AV      0x00001000  /* Cap Eng 0 act vid end */
-#define   VDE_I_C0VBI     0x00002000  /* Cap Eng 0 VBI end */
-#define   VDE_I_C1VBI     0x00004000  /* Cap Eng 1 VBI end */
-#define   VDE_I_VSYNC2    0x00008000  /* Sec. Disp. VSYNC */
-#define   VDE_I_DVISNSEN  0x00010000  /* DVI sense enable */
-#define   VDE_I_VSYNC2EN  0x00020000  /* Sec Disp VSYNC enable */
-#define   VDE_I_MCCFIEN	  0x00040000  /* MC comp frame int mask enable */
-#define   VDE_I_VSYNCEN   0x00080000  /* VSYNC enable */
-#define   VDE_I_DMA0DDEN  0x00100000  /* DMA 0 descr done enable */
-#define   VDE_I_DMA0TDEN  0x00200000  /* DMA 0 trans done enable */
-#define   VDE_I_DMA1DDEN  0x00400000  /* DMA 1 descr done enable */
-#define   VDE_I_DMA1TDEN  0x00800000  /* DMA 1 trans done enable */
-#define   VDE_I_C1AVEN    0x01000000  /* cap 1 act vid end enable */
-#define   VDE_I_HQV0EN	  0x02000000  /* First hqv engine enable */
-#define   VDE_I_C1VBIEN	  0x04000000  /* Cap 1 VBI end enable */
-#define   VDE_I_LVDSSI    0x08000000  /* LVDS sense interrupt */
-#define   VDE_I_C0AVEN    0x10000000  /* Cap 0 act vid end enable */
-#define   VDE_I_C0VBIEN   0x20000000  /* Cap 0 VBI end enable */
-#define   VDE_I_LVDSSIEN  0x40000000  /* LVDS Sense enable */
-#define   VDE_I_ENABLE	  0x80000000  /* Global interrupt enable */
-
-#if defined(CONFIG_VIDEO_VIA_CAMERA) || defined(CONFIG_VIDEO_VIA_CAMERA_MODULE)
-/*
- * DMA management.
- */
-int viafb_request_dma(void);
-void viafb_release_dma(void);
-/* void viafb_dma_copy_out(unsigned int offset, dma_addr_t paddr, int len); */
-int viafb_dma_copy_out_sg(unsigned int offset, struct scatterlist *sg, int nsg);
-
-/*
- * DMA Controller registers.
- */
-#define VDMA_MR0	0xe00		/* Mod reg 0 */
-#define   VDMA_MR_CHAIN   0x01		/* Chaining mode */
-#define   VDMA_MR_TDIE    0x02		/* Transfer done int enable */
-#define VDMA_CSR0	0xe04		/* Control/status */
-#define	  VDMA_C_ENABLE	  0x01		  /* DMA Enable */
-#define	  VDMA_C_START	  0x02		  /* Start a transfer */
-#define	  VDMA_C_ABORT	  0x04		  /* Abort a transfer */
-#define	  VDMA_C_DONE	  0x08		  /* Transfer is done */
-#define VDMA_MARL0	0xe20		/* Mem addr low */
-#define VDMA_MARH0	0xe24		/* Mem addr high */
-#define VDMA_DAR0	0xe28		/* Device address */
-#define VDMA_DQWCR0	0xe2c		/* Count (16-byte) */
-#define VDMA_TMR0	0xe30		/* Tile mode reg */
-#define VDMA_DPRL0	0xe34		/* Not sure */
-#define	  VDMA_DPR_IN	  0x08		/* Inbound transfer to FB */
-#define VDMA_DPRH0	0xe38
-#define VDMA_PMR0	(0xe00 + 0x134) /* Pitch mode */
-
-/*
- * Useful stuff that probably belongs somewhere global.
- */
-#define VGA_WIDTH	640
-#define VGA_HEIGHT	480
-#endif /* CONFIG_VIDEO_VIA_CAMERA */
-
-/*
- * Indexed port operations.  Note that these are all multi-op
- * functions; every invocation will be racy if you're not holding
- * reg_lock.
- */
-
-#define VIAStatus   0x3DA  /* Non-indexed port */
-#define VIACR       0x3D4
-#define VIASR       0x3C4
-#define VIAGR       0x3CE
-#define VIAAR       0x3C0
-
-static inline u8 via_read_reg(u16 port, u8 index)
-{
-	outb(index, port);
-	return inb(port + 1);
-}
-
-static inline void via_write_reg(u16 port, u8 index, u8 data)
-{
-	outb(index, port);
-	outb(data, port + 1);
-}
-
-static inline void via_write_reg_mask(u16 port, u8 index, u8 data, u8 mask)
-{
-	u8 old;
-
-	outb(index, port);
-	old = inb(port + 1);
-	outb((data & mask) | (old & ~mask), port + 1);
-}
-
-#define VIA_MISC_REG_READ	0x03CC
-#define VIA_MISC_REG_WRITE	0x03C2
-
-static inline void via_write_misc_reg_mask(u8 data, u8 mask)
-{
-	u8 old = inb(VIA_MISC_REG_READ);
-	outb((data & mask) | (old & ~mask), VIA_MISC_REG_WRITE);
-}
-
-
-#endif /* __VIA_CORE_H__ */
diff --git a/ANDROID_3.4.5/include/linux/via-gpio.h b/ANDROID_3.4.5/include/linux/via-gpio.h
deleted file mode 100644
index 8281aea3..00000000
--- a/ANDROID_3.4.5/include/linux/via-gpio.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/*
- * Support for viafb GPIO ports.
- *
- * Copyright 2009 Jonathan Corbet <corbet@lwn.net>
- * Distributable under version 2 of the GNU General Public License.
- */
-
-#ifndef __VIA_GPIO_H__
-#define __VIA_GPIO_H__
-
-extern int viafb_gpio_lookup(const char *name);
-extern int viafb_gpio_init(void);
-extern void viafb_gpio_exit(void);
-#endif
diff --git a/ANDROID_3.4.5/include/linux/via.h b/ANDROID_3.4.5/include/linux/via.h
deleted file mode 100644
index 86ae3bcd..00000000
--- a/ANDROID_3.4.5/include/linux/via.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/* Miscellaneous definitions for VIA chipsets
-   Currently used only by drivers/parport/parport_pc.c */
-
-/* Values for SuperIO function select configuration register */
-#define VIA_FUNCTION_PARPORT_SPP     0x00
-#define VIA_FUNCTION_PARPORT_ECP     0x01
-#define VIA_FUNCTION_PARPORT_EPP     0x02
-#define VIA_FUNCTION_PARPORT_DISABLE 0x03
-#define VIA_FUNCTION_PROBE           0xFF /* Special magic value to be used in code, not to be written into chip */
-
-/* Bits for parallel port mode configuration register */
-#define VIA_PARPORT_ECPEPP 0X20
-#define VIA_PARPORT_BIDIR  0x80
-
-/* VIA configuration registers */
-#define VIA_CONFIG_INDEX 0x3F0
-#define VIA_CONFIG_DATA  0x3F1
-
-/* Mask for parallel port IRQ bits (in ISA PnP IRQ routing register 1) */
-#define VIA_IRQCONTROL_PARALLEL 0xF0
-/* Mask for parallel port DMA bits (in ISA PnP DMA routing register) */
-#define VIA_DMACONTROL_PARALLEL 0x0C
diff --git a/ANDROID_3.4.5/include/linux/via_i2c.h b/ANDROID_3.4.5/include/linux/via_i2c.h
deleted file mode 100644
index 44532e46..00000000
--- a/ANDROID_3.4.5/include/linux/via_i2c.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * Copyright 1998-2009 VIA Technologies, Inc. All Rights Reserved.
- * Copyright 2001-2008 S3 Graphics, Inc. All Rights Reserved.
-
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public
- * License as published by the Free Software Foundation;
- * either version 2, or (at your option) any later version.
-
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTIES OR REPRESENTATIONS; without even
- * the implied warranty of MERCHANTABILITY or FITNESS FOR
- * A PARTICULAR PURPOSE.See the GNU General Public License
- * for more details.
-
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc.,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- */
-#ifndef __VIA_I2C_H__
-#define __VIA_I2C_H__
-
-#include <linux/i2c.h>
-#include <linux/i2c-algo-bit.h>
-
-struct via_i2c_stuff {
-	u16 i2c_port;			/* GPIO or I2C port */
-	u16 is_active;			/* Being used as I2C? */
-	struct i2c_adapter adapter;
-	struct i2c_algo_bit_data algo;
-};
-
-
-int viafb_i2c_readbyte(u8 adap, u8 slave_addr, u8 index, u8 *pdata);
-int viafb_i2c_writebyte(u8 adap, u8 slave_addr, u8 index, u8 data);
-int viafb_i2c_readbytes(u8 adap, u8 slave_addr, u8 index, u8 *buff, int buff_len);
-struct i2c_adapter *viafb_find_i2c_adapter(enum viafb_i2c_adap which);
-
-extern int viafb_i2c_init(void);
-extern void viafb_i2c_exit(void);
-#endif /* __VIA_I2C_H__ */
diff --git a/ANDROID_3.4.5/include/linux/video_output.h b/ANDROID_3.4.5/include/linux/video_output.h
deleted file mode 100644
index ed5cdeb3..00000000
--- a/ANDROID_3.4.5/include/linux/video_output.h
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- *
- *  Copyright (C) 2006 Luming Yu <luming.yu@intel.com>
- *
- * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or (at
- *  your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful, but
- *  WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- *  General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
- *
- * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- */
-#ifndef _LINUX_VIDEO_OUTPUT_H
-#define _LINUX_VIDEO_OUTPUT_H
-#include <linux/device.h>
-#include <linux/err.h>
-struct output_device;
-struct output_properties {
-	int (*set_state)(struct output_device *);
-	int (*get_status)(struct output_device *);
-};
-struct output_device {
-	int request_state;
-	struct output_properties *props;
-	struct device dev;
-};
-#define to_output_device(obj) container_of(obj, struct output_device, dev)
-#if	defined(CONFIG_VIDEO_OUTPUT_CONTROL) || defined(CONFIG_VIDEO_OUTPUT_CONTROL_MODULE)
-struct output_device *video_output_register(const char *name,
-	struct device *dev,
-	void *devdata,
-	struct output_properties *op);
-void video_output_unregister(struct output_device *dev);
-#else
-static struct output_device *video_output_register(const char *name,
-        struct device *dev,
-        void *devdata,
-        struct output_properties *op)
-{
-	return ERR_PTR(-ENODEV);
-}
-static void video_output_unregister(struct output_device *dev)
-{
-	return;
-}
-#endif
-#endif
diff --git a/ANDROID_3.4.5/include/linux/videodev2.h b/ANDROID_3.4.5/include/linux/videodev2.h
deleted file mode 100644
index c9c9a468..00000000
--- a/ANDROID_3.4.5/include/linux/videodev2.h
+++ /dev/null
@@ -1,2416 +0,0 @@
-/*
- *  Video for Linux Two header file
- *
- *  Copyright (C) 1999-2007 the contributors
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  Alternatively you can redistribute this file under the terms of the
- *  BSD license as stated below:
- *
- *  Redistribution and use in source and binary forms, with or without
- *  modification, are permitted provided that the following conditions
- *  are met:
- *  1. Redistributions of source code must retain the above copyright
- *     notice, this list of conditions and the following disclaimer.
- *  2. Redistributions in binary form must reproduce the above copyright
- *     notice, this list of conditions and the following disclaimer in
- *     the documentation and/or other materials provided with the
- *     distribution.
- *  3. The names of its contributors may not be used to endorse or promote
- *     products derived from this software without specific prior written
- *     permission.
- *
- *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
- *  TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
- *  PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
- *  LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
- *  NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- *  SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *	Header file for v4l or V4L2 drivers and applications
- * with public API.
- * All kernel-specific stuff were moved to media/v4l2-dev.h, so
- * no #if __KERNEL tests are allowed here
- *
- *	See http://linuxtv.org for more info
- *
- *	Author: Bill Dirks <bill@thedirks.org>
- *		Justin Schoeman
- *              Hans Verkuil <hverkuil@xs4all.nl>
- *		et al.
- */
-#ifndef __LINUX_VIDEODEV2_H
-#define __LINUX_VIDEODEV2_H
-
-#ifdef __KERNEL__
-#include <linux/time.h>     /* need struct timeval */
-#else
-#include <sys/time.h>
-#endif
-#include <linux/compiler.h>
-#include <linux/ioctl.h>
-#include <linux/types.h>
-
-/*
- * Common stuff for both V4L1 and V4L2
- * Moved from videodev.h
- */
-#define VIDEO_MAX_FRAME               32
-#define VIDEO_MAX_PLANES               8
-
-#ifndef __KERNEL__
-
-/* These defines are V4L1 specific and should not be used with the V4L2 API!
-   They will be removed from this header in the future. */
-
-#define VID_TYPE_CAPTURE	1	/* Can capture */
-#define VID_TYPE_TUNER		2	/* Can tune */
-#define VID_TYPE_TELETEXT	4	/* Does teletext */
-#define VID_TYPE_OVERLAY	8	/* Overlay onto frame buffer */
-#define VID_TYPE_CHROMAKEY	16	/* Overlay by chromakey */
-#define VID_TYPE_CLIPPING	32	/* Can clip */
-#define VID_TYPE_FRAMERAM	64	/* Uses the frame buffer memory */
-#define VID_TYPE_SCALES		128	/* Scalable */
-#define VID_TYPE_MONOCHROME	256	/* Monochrome only */
-#define VID_TYPE_SUBCAPTURE	512	/* Can capture subareas of the image */
-#define VID_TYPE_MPEG_DECODER	1024	/* Can decode MPEG streams */
-#define VID_TYPE_MPEG_ENCODER	2048	/* Can encode MPEG streams */
-#define VID_TYPE_MJPEG_DECODER	4096	/* Can decode MJPEG streams */
-#define VID_TYPE_MJPEG_ENCODER	8192	/* Can encode MJPEG streams */
-#endif
-
-/*
- *	M I S C E L L A N E O U S
- */
-
-/*  Four-character-code (FOURCC) */
-#define v4l2_fourcc(a, b, c, d)\
-	((__u32)(a) | ((__u32)(b) << 8) | ((__u32)(c) << 16) | ((__u32)(d) << 24))
-
-/*
- *	E N U M S
- */
-enum v4l2_field {
-	V4L2_FIELD_ANY           = 0, /* driver can choose from none,
-					 top, bottom, interlaced
-					 depending on whatever it thinks
-					 is approximate ... */
-	V4L2_FIELD_NONE          = 1, /* this device has no fields ... */
-	V4L2_FIELD_TOP           = 2, /* top field only */
-	V4L2_FIELD_BOTTOM        = 3, /* bottom field only */
-	V4L2_FIELD_INTERLACED    = 4, /* both fields interlaced */
-	V4L2_FIELD_SEQ_TB        = 5, /* both fields sequential into one
-					 buffer, top-bottom order */
-	V4L2_FIELD_SEQ_BT        = 6, /* same as above + bottom-top order */
-	V4L2_FIELD_ALTERNATE     = 7, /* both fields alternating into
-					 separate buffers */
-	V4L2_FIELD_INTERLACED_TB = 8, /* both fields interlaced, top field
-					 first and the top field is
-					 transmitted first */
-	V4L2_FIELD_INTERLACED_BT = 9, /* both fields interlaced, top field
-					 first and the bottom field is
-					 transmitted first */
-};
-#define V4L2_FIELD_HAS_TOP(field)	\
-	((field) == V4L2_FIELD_TOP 	||\
-	 (field) == V4L2_FIELD_INTERLACED ||\
-	 (field) == V4L2_FIELD_INTERLACED_TB ||\
-	 (field) == V4L2_FIELD_INTERLACED_BT ||\
-	 (field) == V4L2_FIELD_SEQ_TB	||\
-	 (field) == V4L2_FIELD_SEQ_BT)
-#define V4L2_FIELD_HAS_BOTTOM(field)	\
-	((field) == V4L2_FIELD_BOTTOM 	||\
-	 (field) == V4L2_FIELD_INTERLACED ||\
-	 (field) == V4L2_FIELD_INTERLACED_TB ||\
-	 (field) == V4L2_FIELD_INTERLACED_BT ||\
-	 (field) == V4L2_FIELD_SEQ_TB	||\
-	 (field) == V4L2_FIELD_SEQ_BT)
-#define V4L2_FIELD_HAS_BOTH(field)	\
-	((field) == V4L2_FIELD_INTERLACED ||\
-	 (field) == V4L2_FIELD_INTERLACED_TB ||\
-	 (field) == V4L2_FIELD_INTERLACED_BT ||\
-	 (field) == V4L2_FIELD_SEQ_TB ||\
-	 (field) == V4L2_FIELD_SEQ_BT)
-
-enum v4l2_buf_type {
-	V4L2_BUF_TYPE_VIDEO_CAPTURE        = 1,
-	V4L2_BUF_TYPE_VIDEO_OUTPUT         = 2,
-	V4L2_BUF_TYPE_VIDEO_OVERLAY        = 3,
-	V4L2_BUF_TYPE_VBI_CAPTURE          = 4,
-	V4L2_BUF_TYPE_VBI_OUTPUT           = 5,
-	V4L2_BUF_TYPE_SLICED_VBI_CAPTURE   = 6,
-	V4L2_BUF_TYPE_SLICED_VBI_OUTPUT    = 7,
-#if 1
-	/* Experimental */
-	V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY = 8,
-#endif
-	V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE = 9,
-	V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE  = 10,
-	V4L2_BUF_TYPE_PRIVATE              = 0x80,
-};
-
-#define V4L2_TYPE_IS_MULTIPLANAR(type)			\
-	((type) == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE	\
-	 || (type) == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE)
-
-#define V4L2_TYPE_IS_OUTPUT(type)				\
-	((type) == V4L2_BUF_TYPE_VIDEO_OUTPUT			\
-	 || (type) == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE		\
-	 || (type) == V4L2_BUF_TYPE_VIDEO_OVERLAY		\
-	 || (type) == V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY	\
-	 || (type) == V4L2_BUF_TYPE_VBI_OUTPUT			\
-	 || (type) == V4L2_BUF_TYPE_SLICED_VBI_OUTPUT)
-
-enum v4l2_tuner_type {
-	V4L2_TUNER_RADIO	     = 1,
-	V4L2_TUNER_ANALOG_TV	     = 2,
-	V4L2_TUNER_DIGITAL_TV	     = 3,
-};
-
-enum v4l2_memory {
-	V4L2_MEMORY_MMAP             = 1,
-	V4L2_MEMORY_USERPTR          = 2,
-	V4L2_MEMORY_OVERLAY          = 3,
-};
-
-/* see also http://vektor.theorem.ca/graphics/ycbcr/ */
-enum v4l2_colorspace {
-	/* ITU-R 601 -- broadcast NTSC/PAL */
-	V4L2_COLORSPACE_SMPTE170M     = 1,
-
-	/* 1125-Line (US) HDTV */
-	V4L2_COLORSPACE_SMPTE240M     = 2,
-
-	/* HD and modern captures. */
-	V4L2_COLORSPACE_REC709        = 3,
-
-	/* broken BT878 extents (601, luma range 16-253 instead of 16-235) */
-	V4L2_COLORSPACE_BT878         = 4,
-
-	/* These should be useful.  Assume 601 extents. */
-	V4L2_COLORSPACE_470_SYSTEM_M  = 5,
-	V4L2_COLORSPACE_470_SYSTEM_BG = 6,
-
-	/* I know there will be cameras that send this.  So, this is
-	 * unspecified chromaticities and full 0-255 on each of the
-	 * Y'CbCr components
-	 */
-	V4L2_COLORSPACE_JPEG          = 7,
-
-	/* For RGB colourspaces, this is probably a good start. */
-	V4L2_COLORSPACE_SRGB          = 8,
-};
-
-enum v4l2_priority {
-	V4L2_PRIORITY_UNSET       = 0,  /* not initialized */
-	V4L2_PRIORITY_BACKGROUND  = 1,
-	V4L2_PRIORITY_INTERACTIVE = 2,
-	V4L2_PRIORITY_RECORD      = 3,
-	V4L2_PRIORITY_DEFAULT     = V4L2_PRIORITY_INTERACTIVE,
-};
-
-struct v4l2_rect {
-	__s32   left;
-	__s32   top;
-	__s32   width;
-	__s32   height;
-};
-
-struct v4l2_fract {
-	__u32   numerator;
-	__u32   denominator;
-};
-
-/**
-  * struct v4l2_capability - Describes V4L2 device caps returned by VIDIOC_QUERYCAP
-  *
-  * @driver:	   name of the driver module (e.g. "bttv")
-  * @card:	   name of the card (e.g. "Hauppauge WinTV")
-  * @bus_info:	   name of the bus (e.g. "PCI:" + pci_name(pci_dev) )
-  * @version:	   KERNEL_VERSION
-  * @capabilities: capabilities of the physical device as a whole
-  * @device_caps:  capabilities accessed via this particular device (node)
-  * @reserved:	   reserved fields for future extensions
-  */
-struct v4l2_capability {
-	__u8	driver[16];
-	__u8	card[32];
-	__u8	bus_info[32];
-	__u32   version;
-	__u32	capabilities;
-	__u32	device_caps;
-	__u32	reserved[3];
-};
-
-/* Values for 'capabilities' field */
-#define V4L2_CAP_VIDEO_CAPTURE		0x00000001  /* Is a video capture device */
-#define V4L2_CAP_VIDEO_OUTPUT		0x00000002  /* Is a video output device */
-#define V4L2_CAP_VIDEO_OVERLAY		0x00000004  /* Can do video overlay */
-#define V4L2_CAP_VBI_CAPTURE		0x00000010  /* Is a raw VBI capture device */
-#define V4L2_CAP_VBI_OUTPUT		0x00000020  /* Is a raw VBI output device */
-#define V4L2_CAP_SLICED_VBI_CAPTURE	0x00000040  /* Is a sliced VBI capture device */
-#define V4L2_CAP_SLICED_VBI_OUTPUT	0x00000080  /* Is a sliced VBI output device */
-#define V4L2_CAP_RDS_CAPTURE		0x00000100  /* RDS data capture */
-#define V4L2_CAP_VIDEO_OUTPUT_OVERLAY	0x00000200  /* Can do video output overlay */
-#define V4L2_CAP_HW_FREQ_SEEK		0x00000400  /* Can do hardware frequency seek  */
-#define V4L2_CAP_RDS_OUTPUT		0x00000800  /* Is an RDS encoder */
-
-/* Is a video capture device that supports multiplanar formats */
-#define V4L2_CAP_VIDEO_CAPTURE_MPLANE	0x00001000
-/* Is a video output device that supports multiplanar formats */
-#define V4L2_CAP_VIDEO_OUTPUT_MPLANE	0x00002000
-
-#define V4L2_CAP_TUNER			0x00010000  /* has a tuner */
-#define V4L2_CAP_AUDIO			0x00020000  /* has audio support */
-#define V4L2_CAP_RADIO			0x00040000  /* is a radio device */
-#define V4L2_CAP_MODULATOR		0x00080000  /* has a modulator */
-
-#define V4L2_CAP_READWRITE              0x01000000  /* read/write systemcalls */
-#define V4L2_CAP_ASYNCIO                0x02000000  /* async I/O */
-#define V4L2_CAP_STREAMING              0x04000000  /* streaming I/O ioctls */
-
-#define V4L2_CAP_DEVICE_CAPS            0x80000000  /* sets device capabilities field */
-
-/*
- *	V I D E O   I M A G E   F O R M A T
- */
-struct v4l2_pix_format {
-	__u32         		width;
-	__u32			height;
-	__u32			pixelformat;
-	enum v4l2_field  	field;
-	__u32            	bytesperline;	/* for padding, zero if unused */
-	__u32          		sizeimage;
-	enum v4l2_colorspace	colorspace;
-	__u32			priv;		/* private data, depends on pixelformat */
-};
-
-/*      Pixel format         FOURCC                          depth  Description  */
-
-/* RGB formats */
-#define V4L2_PIX_FMT_RGB332  v4l2_fourcc('R', 'G', 'B', '1') /*  8  RGB-3-3-2     */
-#define V4L2_PIX_FMT_RGB444  v4l2_fourcc('R', '4', '4', '4') /* 16  xxxxrrrr ggggbbbb */
-#define V4L2_PIX_FMT_RGB555  v4l2_fourcc('R', 'G', 'B', 'O') /* 16  RGB-5-5-5     */
-#define V4L2_PIX_FMT_RGB565  v4l2_fourcc('R', 'G', 'B', 'P') /* 16  RGB-5-6-5     */
-#define V4L2_PIX_FMT_RGB555X v4l2_fourcc('R', 'G', 'B', 'Q') /* 16  RGB-5-5-5 BE  */
-#define V4L2_PIX_FMT_RGB565X v4l2_fourcc('R', 'G', 'B', 'R') /* 16  RGB-5-6-5 BE  */
-#define V4L2_PIX_FMT_BGR666  v4l2_fourcc('B', 'G', 'R', 'H') /* 18  BGR-6-6-6	  */
-#define V4L2_PIX_FMT_BGR24   v4l2_fourcc('B', 'G', 'R', '3') /* 24  BGR-8-8-8     */
-#define V4L2_PIX_FMT_RGB24   v4l2_fourcc('R', 'G', 'B', '3') /* 24  RGB-8-8-8     */
-#define V4L2_PIX_FMT_BGR32   v4l2_fourcc('B', 'G', 'R', '4') /* 32  BGR-8-8-8-8   */
-#define V4L2_PIX_FMT_RGB32   v4l2_fourcc('R', 'G', 'B', '4') /* 32  RGB-8-8-8-8   */
-
-/* Grey formats */
-#define V4L2_PIX_FMT_GREY    v4l2_fourcc('G', 'R', 'E', 'Y') /*  8  Greyscale     */
-#define V4L2_PIX_FMT_Y4      v4l2_fourcc('Y', '0', '4', ' ') /*  4  Greyscale     */
-#define V4L2_PIX_FMT_Y6      v4l2_fourcc('Y', '0', '6', ' ') /*  6  Greyscale     */
-#define V4L2_PIX_FMT_Y10     v4l2_fourcc('Y', '1', '0', ' ') /* 10  Greyscale     */
-#define V4L2_PIX_FMT_Y12     v4l2_fourcc('Y', '1', '2', ' ') /* 12  Greyscale     */
-#define V4L2_PIX_FMT_Y16     v4l2_fourcc('Y', '1', '6', ' ') /* 16  Greyscale     */
-
-/* Grey bit-packed formats */
-#define V4L2_PIX_FMT_Y10BPACK    v4l2_fourcc('Y', '1', '0', 'B') /* 10  Greyscale bit-packed */
-
-/* Palette formats */
-#define V4L2_PIX_FMT_PAL8    v4l2_fourcc('P', 'A', 'L', '8') /*  8  8-bit palette */
-
-/* Luminance+Chrominance formats */
-#define V4L2_PIX_FMT_YVU410  v4l2_fourcc('Y', 'V', 'U', '9') /*  9  YVU 4:1:0     */
-#define V4L2_PIX_FMT_YVU420  v4l2_fourcc('Y', 'V', '1', '2') /* 12  YVU 4:2:0     */
-#define V4L2_PIX_FMT_YUYV    v4l2_fourcc('Y', 'U', 'Y', 'V') /* 16  YUV 4:2:2     */
-#define V4L2_PIX_FMT_YYUV    v4l2_fourcc('Y', 'Y', 'U', 'V') /* 16  YUV 4:2:2     */
-#define V4L2_PIX_FMT_YVYU    v4l2_fourcc('Y', 'V', 'Y', 'U') /* 16 YVU 4:2:2 */
-#define V4L2_PIX_FMT_UYVY    v4l2_fourcc('U', 'Y', 'V', 'Y') /* 16  YUV 4:2:2     */
-#define V4L2_PIX_FMT_VYUY    v4l2_fourcc('V', 'Y', 'U', 'Y') /* 16  YUV 4:2:2     */
-#define V4L2_PIX_FMT_YUV422P v4l2_fourcc('4', '2', '2', 'P') /* 16  YVU422 planar */
-#define V4L2_PIX_FMT_YUV411P v4l2_fourcc('4', '1', '1', 'P') /* 16  YVU411 planar */
-#define V4L2_PIX_FMT_Y41P    v4l2_fourcc('Y', '4', '1', 'P') /* 12  YUV 4:1:1     */
-#define V4L2_PIX_FMT_YUV444  v4l2_fourcc('Y', '4', '4', '4') /* 16  xxxxyyyy uuuuvvvv */
-#define V4L2_PIX_FMT_YUV555  v4l2_fourcc('Y', 'U', 'V', 'O') /* 16  YUV-5-5-5     */
-#define V4L2_PIX_FMT_YUV565  v4l2_fourcc('Y', 'U', 'V', 'P') /* 16  YUV-5-6-5     */
-#define V4L2_PIX_FMT_YUV32   v4l2_fourcc('Y', 'U', 'V', '4') /* 32  YUV-8-8-8-8   */
-#define V4L2_PIX_FMT_YUV410  v4l2_fourcc('Y', 'U', 'V', '9') /*  9  YUV 4:1:0     */
-#define V4L2_PIX_FMT_YUV420  v4l2_fourcc('Y', 'U', '1', '2') /* 12  YUV 4:2:0     */
-#define V4L2_PIX_FMT_HI240   v4l2_fourcc('H', 'I', '2', '4') /*  8  8-bit color   */
-#define V4L2_PIX_FMT_HM12    v4l2_fourcc('H', 'M', '1', '2') /*  8  YUV 4:2:0 16x16 macroblocks */
-#define V4L2_PIX_FMT_M420    v4l2_fourcc('M', '4', '2', '0') /* 12  YUV 4:2:0 2 lines y, 1 line uv interleaved */
-
-/* two planes -- one Y, one Cr + Cb interleaved  */
-#define V4L2_PIX_FMT_NV12    v4l2_fourcc('N', 'V', '1', '2') /* 12  Y/CbCr 4:2:0  */
-#define V4L2_PIX_FMT_NV21    v4l2_fourcc('N', 'V', '2', '1') /* 12  Y/CrCb 4:2:0  */
-#define V4L2_PIX_FMT_NV16    v4l2_fourcc('N', 'V', '1', '6') /* 16  Y/CbCr 4:2:2  */
-#define V4L2_PIX_FMT_NV61    v4l2_fourcc('N', 'V', '6', '1') /* 16  Y/CrCb 4:2:2  */
-#define V4L2_PIX_FMT_NV24    v4l2_fourcc('N', 'V', '2', '4') /* 24  Y/CbCr 4:4:4  */
-#define V4L2_PIX_FMT_NV42    v4l2_fourcc('N', 'V', '4', '2') /* 24  Y/CrCb 4:4:4  */
-
-/* two non contiguous planes - one Y, one Cr + Cb interleaved  */
-#define V4L2_PIX_FMT_NV12M   v4l2_fourcc('N', 'M', '1', '2') /* 12  Y/CbCr 4:2:0  */
-#define V4L2_PIX_FMT_NV12MT  v4l2_fourcc('T', 'M', '1', '2') /* 12  Y/CbCr 4:2:0 64x32 macroblocks */
-
-/* three non contiguous planes - Y, Cb, Cr */
-#define V4L2_PIX_FMT_YUV420M v4l2_fourcc('Y', 'M', '1', '2') /* 12  YUV420 planar */
-
-/* Bayer formats - see http://www.siliconimaging.com/RGB%20Bayer.htm */
-#define V4L2_PIX_FMT_SBGGR8  v4l2_fourcc('B', 'A', '8', '1') /*  8  BGBG.. GRGR.. */
-#define V4L2_PIX_FMT_SGBRG8  v4l2_fourcc('G', 'B', 'R', 'G') /*  8  GBGB.. RGRG.. */
-#define V4L2_PIX_FMT_SGRBG8  v4l2_fourcc('G', 'R', 'B', 'G') /*  8  GRGR.. BGBG.. */
-#define V4L2_PIX_FMT_SRGGB8  v4l2_fourcc('R', 'G', 'G', 'B') /*  8  RGRG.. GBGB.. */
-#define V4L2_PIX_FMT_SBGGR10 v4l2_fourcc('B', 'G', '1', '0') /* 10  BGBG.. GRGR.. */
-#define V4L2_PIX_FMT_SGBRG10 v4l2_fourcc('G', 'B', '1', '0') /* 10  GBGB.. RGRG.. */
-#define V4L2_PIX_FMT_SGRBG10 v4l2_fourcc('B', 'A', '1', '0') /* 10  GRGR.. BGBG.. */
-#define V4L2_PIX_FMT_SRGGB10 v4l2_fourcc('R', 'G', '1', '0') /* 10  RGRG.. GBGB.. */
-#define V4L2_PIX_FMT_SBGGR12 v4l2_fourcc('B', 'G', '1', '2') /* 12  BGBG.. GRGR.. */
-#define V4L2_PIX_FMT_SGBRG12 v4l2_fourcc('G', 'B', '1', '2') /* 12  GBGB.. RGRG.. */
-#define V4L2_PIX_FMT_SGRBG12 v4l2_fourcc('B', 'A', '1', '2') /* 12  GRGR.. BGBG.. */
-#define V4L2_PIX_FMT_SRGGB12 v4l2_fourcc('R', 'G', '1', '2') /* 12  RGRG.. GBGB.. */
-	/* 10bit raw bayer DPCM compressed to 8 bits */
-#define V4L2_PIX_FMT_SGRBG10DPCM8 v4l2_fourcc('B', 'D', '1', '0')
-	/*
-	 * 10bit raw bayer, expanded to 16 bits
-	 * xxxxrrrrrrrrrrxxxxgggggggggg xxxxggggggggggxxxxbbbbbbbbbb...
-	 */
-#define V4L2_PIX_FMT_SBGGR16 v4l2_fourcc('B', 'Y', 'R', '2') /* 16  BGBG.. GRGR.. */
-
-/* compressed formats */
-#define V4L2_PIX_FMT_MJPEG    v4l2_fourcc('M', 'J', 'P', 'G') /* Motion-JPEG   */
-#define V4L2_PIX_FMT_JPEG     v4l2_fourcc('J', 'P', 'E', 'G') /* JFIF JPEG     */
-#define V4L2_PIX_FMT_DV       v4l2_fourcc('d', 'v', 's', 'd') /* 1394          */
-#define V4L2_PIX_FMT_MPEG     v4l2_fourcc('M', 'P', 'E', 'G') /* MPEG-1/2/4 Multiplexed */
-#define V4L2_PIX_FMT_H264     v4l2_fourcc('H', '2', '6', '4') /* H264 with start codes */
-#define V4L2_PIX_FMT_H264_NO_SC v4l2_fourcc('A', 'V', 'C', '1') /* H264 without start codes */
-#define V4L2_PIX_FMT_H263     v4l2_fourcc('H', '2', '6', '3') /* H263          */
-#define V4L2_PIX_FMT_MPEG1    v4l2_fourcc('M', 'P', 'G', '1') /* MPEG-1 ES     */
-#define V4L2_PIX_FMT_MPEG2    v4l2_fourcc('M', 'P', 'G', '2') /* MPEG-2 ES     */
-#define V4L2_PIX_FMT_MPEG4    v4l2_fourcc('M', 'P', 'G', '4') /* MPEG-4 ES     */
-#define V4L2_PIX_FMT_XVID     v4l2_fourcc('X', 'V', 'I', 'D') /* Xvid           */
-#define V4L2_PIX_FMT_VC1_ANNEX_G v4l2_fourcc('V', 'C', '1', 'G') /* SMPTE 421M Annex G compliant stream */
-#define V4L2_PIX_FMT_VC1_ANNEX_L v4l2_fourcc('V', 'C', '1', 'L') /* SMPTE 421M Annex L compliant stream */
-
-/*  Vendor-specific formats   */
-#define V4L2_PIX_FMT_CPIA1    v4l2_fourcc('C', 'P', 'I', 'A') /* cpia1 YUV */
-#define V4L2_PIX_FMT_WNVA     v4l2_fourcc('W', 'N', 'V', 'A') /* Winnov hw compress */
-#define V4L2_PIX_FMT_SN9C10X  v4l2_fourcc('S', '9', '1', '0') /* SN9C10x compression */
-#define V4L2_PIX_FMT_SN9C20X_I420 v4l2_fourcc('S', '9', '2', '0') /* SN9C20x YUV 4:2:0 */
-#define V4L2_PIX_FMT_PWC1     v4l2_fourcc('P', 'W', 'C', '1') /* pwc older webcam */
-#define V4L2_PIX_FMT_PWC2     v4l2_fourcc('P', 'W', 'C', '2') /* pwc newer webcam */
-#define V4L2_PIX_FMT_ET61X251 v4l2_fourcc('E', '6', '2', '5') /* ET61X251 compression */
-#define V4L2_PIX_FMT_SPCA501  v4l2_fourcc('S', '5', '0', '1') /* YUYV per line */
-#define V4L2_PIX_FMT_SPCA505  v4l2_fourcc('S', '5', '0', '5') /* YYUV per line */
-#define V4L2_PIX_FMT_SPCA508  v4l2_fourcc('S', '5', '0', '8') /* YUVY per line */
-#define V4L2_PIX_FMT_SPCA561  v4l2_fourcc('S', '5', '6', '1') /* compressed GBRG bayer */
-#define V4L2_PIX_FMT_PAC207   v4l2_fourcc('P', '2', '0', '7') /* compressed BGGR bayer */
-#define V4L2_PIX_FMT_MR97310A v4l2_fourcc('M', '3', '1', '0') /* compressed BGGR bayer */
-#define V4L2_PIX_FMT_JL2005BCD v4l2_fourcc('J', 'L', '2', '0') /* compressed RGGB bayer */
-#define V4L2_PIX_FMT_SN9C2028 v4l2_fourcc('S', 'O', 'N', 'X') /* compressed GBRG bayer */
-#define V4L2_PIX_FMT_SQ905C   v4l2_fourcc('9', '0', '5', 'C') /* compressed RGGB bayer */
-#define V4L2_PIX_FMT_PJPG     v4l2_fourcc('P', 'J', 'P', 'G') /* Pixart 73xx JPEG */
-#define V4L2_PIX_FMT_OV511    v4l2_fourcc('O', '5', '1', '1') /* ov511 JPEG */
-#define V4L2_PIX_FMT_OV518    v4l2_fourcc('O', '5', '1', '8') /* ov518 JPEG */
-#define V4L2_PIX_FMT_STV0680  v4l2_fourcc('S', '6', '8', '0') /* stv0680 bayer */
-#define V4L2_PIX_FMT_TM6000   v4l2_fourcc('T', 'M', '6', '0') /* tm5600/tm60x0 */
-#define V4L2_PIX_FMT_CIT_YYVYUY v4l2_fourcc('C', 'I', 'T', 'V') /* one line of Y then 1 line of VYUY */
-#define V4L2_PIX_FMT_KONICA420  v4l2_fourcc('K', 'O', 'N', 'I') /* YUV420 planar in blocks of 256 pixels */
-#define V4L2_PIX_FMT_JPGL	v4l2_fourcc('J', 'P', 'G', 'L') /* JPEG-Lite */
-#define V4L2_PIX_FMT_SE401      v4l2_fourcc('S', '4', '0', '1') /* se401 janggu compressed rgb */
-
-/*
- *	F O R M A T   E N U M E R A T I O N
- */
-struct v4l2_fmtdesc {
-	__u32		    index;             /* Format number      */
-	enum v4l2_buf_type  type;              /* buffer type        */
-	__u32               flags;
-	__u8		    description[32];   /* Description string */
-	__u32		    pixelformat;       /* Format fourcc      */
-	__u32		    reserved[4];
-};
-
-#define V4L2_FMT_FLAG_COMPRESSED 0x0001
-#define V4L2_FMT_FLAG_EMULATED   0x0002
-
-#if 1
-	/* Experimental Frame Size and frame rate enumeration */
-/*
- *	F R A M E   S I Z E   E N U M E R A T I O N
- */
-enum v4l2_frmsizetypes {
-	V4L2_FRMSIZE_TYPE_DISCRETE	= 1,
-	V4L2_FRMSIZE_TYPE_CONTINUOUS	= 2,
-	V4L2_FRMSIZE_TYPE_STEPWISE	= 3,
-};
-
-struct v4l2_frmsize_discrete {
-	__u32			width;		/* Frame width [pixel] */
-	__u32			height;		/* Frame height [pixel] */
-};
-
-struct v4l2_frmsize_stepwise {
-	__u32			min_width;	/* Minimum frame width [pixel] */
-	__u32			max_width;	/* Maximum frame width [pixel] */
-	__u32			step_width;	/* Frame width step size [pixel] */
-	__u32			min_height;	/* Minimum frame height [pixel] */
-	__u32			max_height;	/* Maximum frame height [pixel] */
-	__u32			step_height;	/* Frame height step size [pixel] */
-};
-
-struct v4l2_frmsizeenum {
-	__u32			index;		/* Frame size number */
-	__u32			pixel_format;	/* Pixel format */
-	__u32			type;		/* Frame size type the device supports. */
-
-	union {					/* Frame size */
-		struct v4l2_frmsize_discrete	discrete;
-		struct v4l2_frmsize_stepwise	stepwise;
-	};
-
-	__u32   reserved[2];			/* Reserved space for future use */
-};
-
-/*
- *	F R A M E   R A T E   E N U M E R A T I O N
- */
-enum v4l2_frmivaltypes {
-	V4L2_FRMIVAL_TYPE_DISCRETE	= 1,
-	V4L2_FRMIVAL_TYPE_CONTINUOUS	= 2,
-	V4L2_FRMIVAL_TYPE_STEPWISE	= 3,
-};
-
-struct v4l2_frmival_stepwise {
-	struct v4l2_fract	min;		/* Minimum frame interval [s] */
-	struct v4l2_fract	max;		/* Maximum frame interval [s] */
-	struct v4l2_fract	step;		/* Frame interval step size [s] */
-};
-
-struct v4l2_frmivalenum {
-	__u32			index;		/* Frame format index */
-	__u32			pixel_format;	/* Pixel format */
-	__u32			width;		/* Frame width */
-	__u32			height;		/* Frame height */
-	__u32			type;		/* Frame interval type the device supports. */
-
-	union {					/* Frame interval */
-		struct v4l2_fract		discrete;
-		struct v4l2_frmival_stepwise	stepwise;
-	};
-
-	__u32	reserved[2];			/* Reserved space for future use */
-};
-#endif
-
-/*
- *	T I M E C O D E
- */
-struct v4l2_timecode {
-	__u32	type;
-	__u32	flags;
-	__u8	frames;
-	__u8	seconds;
-	__u8	minutes;
-	__u8	hours;
-	__u8	userbits[4];
-};
-
-/*  Type  */
-#define V4L2_TC_TYPE_24FPS		1
-#define V4L2_TC_TYPE_25FPS		2
-#define V4L2_TC_TYPE_30FPS		3
-#define V4L2_TC_TYPE_50FPS		4
-#define V4L2_TC_TYPE_60FPS		5
-
-/*  Flags  */
-#define V4L2_TC_FLAG_DROPFRAME		0x0001 /* "drop-frame" mode */
-#define V4L2_TC_FLAG_COLORFRAME		0x0002
-#define V4L2_TC_USERBITS_field		0x000C
-#define V4L2_TC_USERBITS_USERDEFINED	0x0000
-#define V4L2_TC_USERBITS_8BITCHARS	0x0008
-/* The above is based on SMPTE timecodes */
-
-struct v4l2_jpegcompression {
-	int quality;
-
-	int  APPn;              /* Number of APP segment to be written,
-				 * must be 0..15 */
-	int  APP_len;           /* Length of data in JPEG APPn segment */
-	char APP_data[60];      /* Data in the JPEG APPn segment. */
-
-	int  COM_len;           /* Length of data in JPEG COM segment */
-	char COM_data[60];      /* Data in JPEG COM segment */
-
-	__u32 jpeg_markers;     /* Which markers should go into the JPEG
-				 * output. Unless you exactly know what
-				 * you do, leave them untouched.
-				 * Inluding less markers will make the
-				 * resulting code smaller, but there will
-				 * be fewer applications which can read it.
-				 * The presence of the APP and COM marker
-				 * is influenced by APP_len and COM_len
-				 * ONLY, not by this property! */
-
-#define V4L2_JPEG_MARKER_DHT (1<<3)    /* Define Huffman Tables */
-#define V4L2_JPEG_MARKER_DQT (1<<4)    /* Define Quantization Tables */
-#define V4L2_JPEG_MARKER_DRI (1<<5)    /* Define Restart Interval */
-#define V4L2_JPEG_MARKER_COM (1<<6)    /* Comment segment */
-#define V4L2_JPEG_MARKER_APP (1<<7)    /* App segment, driver will
-					* allways use APP0 */
-};
-
-/*
- *	M E M O R Y - M A P P I N G   B U F F E R S
- */
-struct v4l2_requestbuffers {
-	__u32			count;
-	enum v4l2_buf_type      type;
-	enum v4l2_memory        memory;
-	__u32			reserved[2];
-};
-
-/**
- * struct v4l2_plane - plane info for multi-planar buffers
- * @bytesused:		number of bytes occupied by data in the plane (payload)
- * @length:		size of this plane (NOT the payload) in bytes
- * @mem_offset:		when memory in the associated struct v4l2_buffer is
- *			V4L2_MEMORY_MMAP, equals the offset from the start of
- *			the device memory for this plane (or is a "cookie" that
- *			should be passed to mmap() called on the video node)
- * @userptr:		when memory is V4L2_MEMORY_USERPTR, a userspace pointer
- *			pointing to this plane
- * @data_offset:	offset in the plane to the start of data; usually 0,
- *			unless there is a header in front of the data
- *
- * Multi-planar buffers consist of one or more planes, e.g. an YCbCr buffer
- * with two planes can have one plane for Y, and another for interleaved CbCr
- * components. Each plane can reside in a separate memory buffer, or even in
- * a completely separate memory node (e.g. in embedded devices).
- */
-struct v4l2_plane {
-	__u32			bytesused;
-	__u32			length;
-	union {
-		__u32		mem_offset;
-		unsigned long	userptr;
-	} m;
-	__u32			data_offset;
-	__u32			reserved[11];
-};
-
-/**
- * struct v4l2_buffer - video buffer info
- * @index:	id number of the buffer
- * @type:	buffer type (type == *_MPLANE for multiplanar buffers)
- * @bytesused:	number of bytes occupied by data in the buffer (payload);
- *		unused (set to 0) for multiplanar buffers
- * @flags:	buffer informational flags
- * @field:	field order of the image in the buffer
- * @timestamp:	frame timestamp
- * @timecode:	frame timecode
- * @sequence:	sequence count of this frame
- * @memory:	the method, in which the actual video data is passed
- * @offset:	for non-multiplanar buffers with memory == V4L2_MEMORY_MMAP;
- *		offset from the start of the device memory for this plane,
- *		(or a "cookie" that should be passed to mmap() as offset)
- * @userptr:	for non-multiplanar buffers with memory == V4L2_MEMORY_USERPTR;
- *		a userspace pointer pointing to this buffer
- * @planes:	for multiplanar buffers; userspace pointer to the array of plane
- *		info structs for this buffer
- * @length:	size in bytes of the buffer (NOT its payload) for single-plane
- *		buffers (when type != *_MPLANE); number of elements in the
- *		planes array for multi-plane buffers
- * @input:	input number from which the video data has has been captured
- *
- * Contains data exchanged by application and driver using one of the Streaming
- * I/O methods.
- */
-struct v4l2_buffer {
-	__u32			index;
-	enum v4l2_buf_type      type;
-	__u32			bytesused;
-	__u32			flags;
-	enum v4l2_field		field;
-	struct timeval		timestamp;
-	struct v4l2_timecode	timecode;
-	__u32			sequence;
-
-	/* memory location */
-	enum v4l2_memory        memory;
-	union {
-		__u32           offset;
-		unsigned long   userptr;
-		struct v4l2_plane *planes;
-	} m;
-	__u32			length;
-	__u32			input;
-	__u32			reserved;
-};
-
-/*  Flags for 'flags' field */
-#define V4L2_BUF_FLAG_MAPPED	0x0001  /* Buffer is mapped (flag) */
-#define V4L2_BUF_FLAG_QUEUED	0x0002	/* Buffer is queued for processing */
-#define V4L2_BUF_FLAG_DONE	0x0004	/* Buffer is ready */
-#define V4L2_BUF_FLAG_KEYFRAME	0x0008	/* Image is a keyframe (I-frame) */
-#define V4L2_BUF_FLAG_PFRAME	0x0010	/* Image is a P-frame */
-#define V4L2_BUF_FLAG_BFRAME	0x0020	/* Image is a B-frame */
-/* Buffer is ready, but the data contained within is corrupted. */
-#define V4L2_BUF_FLAG_ERROR	0x0040
-#define V4L2_BUF_FLAG_TIMECODE	0x0100	/* timecode field is valid */
-#define V4L2_BUF_FLAG_INPUT     0x0200  /* input field is valid */
-#define V4L2_BUF_FLAG_PREPARED	0x0400	/* Buffer is prepared for queuing */
-/* Cache handling flags */
-#define V4L2_BUF_FLAG_NO_CACHE_INVALIDATE	0x0800
-#define V4L2_BUF_FLAG_NO_CACHE_CLEAN		0x1000
-
-/*
- *	O V E R L A Y   P R E V I E W
- */
-struct v4l2_framebuffer {
-	__u32			capability;
-	__u32			flags;
-/* FIXME: in theory we should pass something like PCI device + memory
- * region + offset instead of some physical address */
-	void                    *base;
-	struct v4l2_pix_format	fmt;
-};
-/*  Flags for the 'capability' field. Read only */
-#define V4L2_FBUF_CAP_EXTERNOVERLAY	0x0001
-#define V4L2_FBUF_CAP_CHROMAKEY		0x0002
-#define V4L2_FBUF_CAP_LIST_CLIPPING     0x0004
-#define V4L2_FBUF_CAP_BITMAP_CLIPPING	0x0008
-#define V4L2_FBUF_CAP_LOCAL_ALPHA	0x0010
-#define V4L2_FBUF_CAP_GLOBAL_ALPHA	0x0020
-#define V4L2_FBUF_CAP_LOCAL_INV_ALPHA	0x0040
-#define V4L2_FBUF_CAP_SRC_CHROMAKEY	0x0080
-/*  Flags for the 'flags' field. */
-#define V4L2_FBUF_FLAG_PRIMARY		0x0001
-#define V4L2_FBUF_FLAG_OVERLAY		0x0002
-#define V4L2_FBUF_FLAG_CHROMAKEY	0x0004
-#define V4L2_FBUF_FLAG_LOCAL_ALPHA	0x0008
-#define V4L2_FBUF_FLAG_GLOBAL_ALPHA	0x0010
-#define V4L2_FBUF_FLAG_LOCAL_INV_ALPHA	0x0020
-#define V4L2_FBUF_FLAG_SRC_CHROMAKEY	0x0040
-
-struct v4l2_clip {
-	struct v4l2_rect        c;
-	struct v4l2_clip	__user *next;
-};
-
-struct v4l2_window {
-	struct v4l2_rect        w;
-	enum v4l2_field  	field;
-	__u32			chromakey;
-	struct v4l2_clip	__user *clips;
-	__u32			clipcount;
-	void			__user *bitmap;
-	__u8                    global_alpha;
-};
-
-/*
- *	C A P T U R E   P A R A M E T E R S
- */
-struct v4l2_captureparm {
-	__u32		   capability;	  /*  Supported modes */
-	__u32		   capturemode;	  /*  Current mode */
-	struct v4l2_fract  timeperframe;  /*  Time per frame in .1us units */
-	__u32		   extendedmode;  /*  Driver-specific extensions */
-	__u32              readbuffers;   /*  # of buffers for read */
-	__u32		   reserved[4];
-};
-
-/*  Flags for 'capability' and 'capturemode' fields */
-#define V4L2_MODE_HIGHQUALITY	0x0001	/*  High quality imaging mode */
-#define V4L2_CAP_TIMEPERFRAME	0x1000	/*  timeperframe field is supported */
-
-struct v4l2_outputparm {
-	__u32		   capability;	 /*  Supported modes */
-	__u32		   outputmode;	 /*  Current mode */
-	struct v4l2_fract  timeperframe; /*  Time per frame in seconds */
-	__u32		   extendedmode; /*  Driver-specific extensions */
-	__u32              writebuffers; /*  # of buffers for write */
-	__u32		   reserved[4];
-};
-
-/*
- *	I N P U T   I M A G E   C R O P P I N G
- */
-struct v4l2_cropcap {
-	enum v4l2_buf_type      type;
-	struct v4l2_rect        bounds;
-	struct v4l2_rect        defrect;
-	struct v4l2_fract       pixelaspect;
-};
-
-struct v4l2_crop {
-	enum v4l2_buf_type      type;
-	struct v4l2_rect        c;
-};
-
-/* Hints for adjustments of selection rectangle */
-#define V4L2_SEL_FLAG_GE	0x00000001
-#define V4L2_SEL_FLAG_LE	0x00000002
-
-/* Selection targets */
-
-/* Current cropping area */
-#define V4L2_SEL_TGT_CROP_ACTIVE	0x0000
-/* Default cropping area */
-#define V4L2_SEL_TGT_CROP_DEFAULT	0x0001
-/* Cropping bounds */
-#define V4L2_SEL_TGT_CROP_BOUNDS	0x0002
-/* Current composing area */
-#define V4L2_SEL_TGT_COMPOSE_ACTIVE	0x0100
-/* Default composing area */
-#define V4L2_SEL_TGT_COMPOSE_DEFAULT	0x0101
-/* Composing bounds */
-#define V4L2_SEL_TGT_COMPOSE_BOUNDS	0x0102
-/* Current composing area plus all padding pixels */
-#define V4L2_SEL_TGT_COMPOSE_PADDED	0x0103
-
-/**
- * struct v4l2_selection - selection info
- * @type:	buffer type (do not use *_MPLANE types)
- * @target:	selection target, used to choose one of possible rectangles
- * @flags:	constraints flags
- * @r:		coordinates of selection window
- * @reserved:	for future use, rounds structure size to 64 bytes, set to zero
- *
- * Hardware may use multiple helper windows to process a video stream.
- * The structure is used to exchange this selection areas between
- * an application and a driver.
- */
-struct v4l2_selection {
-	__u32			type;
-	__u32			target;
-	__u32                   flags;
-	struct v4l2_rect        r;
-	__u32                   reserved[9];
-};
-
-
-/*
- *      A N A L O G   V I D E O   S T A N D A R D
- */
-
-typedef __u64 v4l2_std_id;
-
-/* one bit for each */
-#define V4L2_STD_PAL_B          ((v4l2_std_id)0x00000001)
-#define V4L2_STD_PAL_B1         ((v4l2_std_id)0x00000002)
-#define V4L2_STD_PAL_G          ((v4l2_std_id)0x00000004)
-#define V4L2_STD_PAL_H          ((v4l2_std_id)0x00000008)
-#define V4L2_STD_PAL_I          ((v4l2_std_id)0x00000010)
-#define V4L2_STD_PAL_D          ((v4l2_std_id)0x00000020)
-#define V4L2_STD_PAL_D1         ((v4l2_std_id)0x00000040)
-#define V4L2_STD_PAL_K          ((v4l2_std_id)0x00000080)
-
-#define V4L2_STD_PAL_M          ((v4l2_std_id)0x00000100)
-#define V4L2_STD_PAL_N          ((v4l2_std_id)0x00000200)
-#define V4L2_STD_PAL_Nc         ((v4l2_std_id)0x00000400)
-#define V4L2_STD_PAL_60         ((v4l2_std_id)0x00000800)
-
-#define V4L2_STD_NTSC_M         ((v4l2_std_id)0x00001000)	/* BTSC */
-#define V4L2_STD_NTSC_M_JP      ((v4l2_std_id)0x00002000)	/* EIA-J */
-#define V4L2_STD_NTSC_443       ((v4l2_std_id)0x00004000)
-#define V4L2_STD_NTSC_M_KR      ((v4l2_std_id)0x00008000)	/* FM A2 */
-
-#define V4L2_STD_SECAM_B        ((v4l2_std_id)0x00010000)
-#define V4L2_STD_SECAM_D        ((v4l2_std_id)0x00020000)
-#define V4L2_STD_SECAM_G        ((v4l2_std_id)0x00040000)
-#define V4L2_STD_SECAM_H        ((v4l2_std_id)0x00080000)
-#define V4L2_STD_SECAM_K        ((v4l2_std_id)0x00100000)
-#define V4L2_STD_SECAM_K1       ((v4l2_std_id)0x00200000)
-#define V4L2_STD_SECAM_L        ((v4l2_std_id)0x00400000)
-#define V4L2_STD_SECAM_LC       ((v4l2_std_id)0x00800000)
-
-/* ATSC/HDTV */
-#define V4L2_STD_ATSC_8_VSB     ((v4l2_std_id)0x01000000)
-#define V4L2_STD_ATSC_16_VSB    ((v4l2_std_id)0x02000000)
-
-/* FIXME:
-   Although std_id is 64 bits, there is an issue on PPC32 architecture that
-   makes switch(__u64) to break. So, there's a hack on v4l2-common.c rounding
-   this value to 32 bits.
-   As, currently, the max value is for V4L2_STD_ATSC_16_VSB (30 bits wide),
-   it should work fine. However, if needed to add more than two standards,
-   v4l2-common.c should be fixed.
- */
-
-/*
- * Some macros to merge video standards in order to make live easier for the
- * drivers and V4L2 applications
- */
-
-/*
- * "Common" NTSC/M - It should be noticed that V4L2_STD_NTSC_443 is
- * Missing here.
- */
-#define V4L2_STD_NTSC           (V4L2_STD_NTSC_M	|\
-				 V4L2_STD_NTSC_M_JP     |\
-				 V4L2_STD_NTSC_M_KR)
-/* Secam macros */
-#define V4L2_STD_SECAM_DK      	(V4L2_STD_SECAM_D	|\
-				 V4L2_STD_SECAM_K	|\
-				 V4L2_STD_SECAM_K1)
-/* All Secam Standards */
-#define V4L2_STD_SECAM		(V4L2_STD_SECAM_B	|\
-				 V4L2_STD_SECAM_G	|\
-				 V4L2_STD_SECAM_H	|\
-				 V4L2_STD_SECAM_DK	|\
-				 V4L2_STD_SECAM_L       |\
-				 V4L2_STD_SECAM_LC)
-/* PAL macros */
-#define V4L2_STD_PAL_BG		(V4L2_STD_PAL_B		|\
-				 V4L2_STD_PAL_B1	|\
-				 V4L2_STD_PAL_G)
-#define V4L2_STD_PAL_DK		(V4L2_STD_PAL_D		|\
-				 V4L2_STD_PAL_D1	|\
-				 V4L2_STD_PAL_K)
-/*
- * "Common" PAL - This macro is there to be compatible with the old
- * V4L1 concept of "PAL": /BGDKHI.
- * Several PAL standards are mising here: /M, /N and /Nc
- */
-#define V4L2_STD_PAL		(V4L2_STD_PAL_BG	|\
-				 V4L2_STD_PAL_DK	|\
-				 V4L2_STD_PAL_H		|\
-				 V4L2_STD_PAL_I)
-/* Chroma "agnostic" standards */
-#define V4L2_STD_B		(V4L2_STD_PAL_B		|\
-				 V4L2_STD_PAL_B1	|\
-				 V4L2_STD_SECAM_B)
-#define V4L2_STD_G		(V4L2_STD_PAL_G		|\
-				 V4L2_STD_SECAM_G)
-#define V4L2_STD_H		(V4L2_STD_PAL_H		|\
-				 V4L2_STD_SECAM_H)
-#define V4L2_STD_L		(V4L2_STD_SECAM_L	|\
-				 V4L2_STD_SECAM_LC)
-#define V4L2_STD_GH		(V4L2_STD_G		|\
-				 V4L2_STD_H)
-#define V4L2_STD_DK		(V4L2_STD_PAL_DK	|\
-				 V4L2_STD_SECAM_DK)
-#define V4L2_STD_BG		(V4L2_STD_B		|\
-				 V4L2_STD_G)
-#define V4L2_STD_MN		(V4L2_STD_PAL_M		|\
-				 V4L2_STD_PAL_N		|\
-				 V4L2_STD_PAL_Nc	|\
-				 V4L2_STD_NTSC)
-
-/* Standards where MTS/BTSC stereo could be found */
-#define V4L2_STD_MTS		(V4L2_STD_NTSC_M	|\
-				 V4L2_STD_PAL_M		|\
-				 V4L2_STD_PAL_N		|\
-				 V4L2_STD_PAL_Nc)
-
-/* Standards for Countries with 60Hz Line frequency */
-#define V4L2_STD_525_60		(V4L2_STD_PAL_M		|\
-				 V4L2_STD_PAL_60	|\
-				 V4L2_STD_NTSC		|\
-				 V4L2_STD_NTSC_443)
-/* Standards for Countries with 50Hz Line frequency */
-#define V4L2_STD_625_50		(V4L2_STD_PAL		|\
-				 V4L2_STD_PAL_N		|\
-				 V4L2_STD_PAL_Nc	|\
-				 V4L2_STD_SECAM)
-
-#define V4L2_STD_ATSC           (V4L2_STD_ATSC_8_VSB    |\
-				 V4L2_STD_ATSC_16_VSB)
-/* Macros with none and all analog standards */
-#define V4L2_STD_UNKNOWN        0
-#define V4L2_STD_ALL            (V4L2_STD_525_60	|\
-				 V4L2_STD_625_50)
-
-struct v4l2_standard {
-	__u32		     index;
-	v4l2_std_id          id;
-	__u8		     name[24];
-	struct v4l2_fract    frameperiod; /* Frames, not fields */
-	__u32		     framelines;
-	__u32		     reserved[4];
-};
-
-/*
- *	V I D E O	T I M I N G S	D V	P R E S E T
- */
-struct v4l2_dv_preset {
-	__u32	preset;
-	__u32	reserved[4];
-};
-
-/*
- *	D V	P R E S E T S	E N U M E R A T I O N
- */
-struct v4l2_dv_enum_preset {
-	__u32	index;
-	__u32	preset;
-	__u8	name[32]; /* Name of the preset timing */
-	__u32	width;
-	__u32	height;
-	__u32	reserved[4];
-};
-
-/*
- * 	D V	P R E S E T	V A L U E S
- */
-#define		V4L2_DV_INVALID		0
-#define		V4L2_DV_480P59_94	1 /* BT.1362 */
-#define		V4L2_DV_576P50		2 /* BT.1362 */
-#define		V4L2_DV_720P24		3 /* SMPTE 296M */
-#define		V4L2_DV_720P25		4 /* SMPTE 296M */
-#define		V4L2_DV_720P30		5 /* SMPTE 296M */
-#define		V4L2_DV_720P50		6 /* SMPTE 296M */
-#define		V4L2_DV_720P59_94	7 /* SMPTE 274M */
-#define		V4L2_DV_720P60		8 /* SMPTE 274M/296M */
-#define		V4L2_DV_1080I29_97	9 /* BT.1120/ SMPTE 274M */
-#define		V4L2_DV_1080I30		10 /* BT.1120/ SMPTE 274M */
-#define		V4L2_DV_1080I25		11 /* BT.1120 */
-#define		V4L2_DV_1080I50		12 /* SMPTE 296M */
-#define		V4L2_DV_1080I60		13 /* SMPTE 296M */
-#define		V4L2_DV_1080P24		14 /* SMPTE 296M */
-#define		V4L2_DV_1080P25		15 /* SMPTE 296M */
-#define		V4L2_DV_1080P30		16 /* SMPTE 296M */
-#define		V4L2_DV_1080P50		17 /* BT.1120 */
-#define		V4L2_DV_1080P60		18 /* BT.1120 */
-
-/*
- *	D V 	B T	T I M I N G S
- */
-
-/* BT.656/BT.1120 timing data */
-struct v4l2_bt_timings {
-	__u32	width;		/* width in pixels */
-	__u32	height;		/* height in lines */
-	__u32	interlaced;	/* Interlaced or progressive */
-	__u32	polarities;	/* Positive or negative polarity */
-	__u64	pixelclock;	/* Pixel clock in HZ. Ex. 74.25MHz->74250000 */
-	__u32	hfrontporch;	/* Horizpontal front porch in pixels */
-	__u32	hsync;		/* Horizontal Sync length in pixels */
-	__u32	hbackporch;	/* Horizontal back porch in pixels */
-	__u32	vfrontporch;	/* Vertical front porch in pixels */
-	__u32	vsync;		/* Vertical Sync length in lines */
-	__u32	vbackporch;	/* Vertical back porch in lines */
-	__u32	il_vfrontporch;	/* Vertical front porch for bottom field of
-				 * interlaced field formats
-				 */
-	__u32	il_vsync;	/* Vertical sync length for bottom field of
-				 * interlaced field formats
-				 */
-	__u32	il_vbackporch;	/* Vertical back porch for bottom field of
-				 * interlaced field formats
-				 */
-	__u32	reserved[16];
-} __attribute__ ((packed));
-
-/* Interlaced or progressive format */
-#define	V4L2_DV_PROGRESSIVE	0
-#define	V4L2_DV_INTERLACED	1
-
-/* Polarities. If bit is not set, it is assumed to be negative polarity */
-#define V4L2_DV_VSYNC_POS_POL	0x00000001
-#define V4L2_DV_HSYNC_POS_POL	0x00000002
-
-
-/* DV timings */
-struct v4l2_dv_timings {
-	__u32 type;
-	union {
-		struct v4l2_bt_timings	bt;
-		__u32	reserved[32];
-	};
-} __attribute__ ((packed));
-
-/* Values for the type field */
-#define V4L2_DV_BT_656_1120	0	/* BT.656/1120 timing type */
-
-/*
- *	V I D E O   I N P U T S
- */
-struct v4l2_input {
-	__u32	     index;		/*  Which input */
-	__u8	     name[32];		/*  Label */
-	__u32	     type;		/*  Type of input */
-	__u32	     audioset;		/*  Associated audios (bitfield) */
-	__u32        tuner;             /*  Associated tuner */
-	v4l2_std_id  std;
-	__u32	     status;
-	__u32	     capabilities;
-	__u32	     reserved[3];
-};
-
-/*  Values for the 'type' field */
-#define V4L2_INPUT_TYPE_TUNER		1
-#define V4L2_INPUT_TYPE_CAMERA		2
-
-/* field 'status' - general */
-#define V4L2_IN_ST_NO_POWER    0x00000001  /* Attached device is off */
-#define V4L2_IN_ST_NO_SIGNAL   0x00000002
-#define V4L2_IN_ST_NO_COLOR    0x00000004
-
-/* field 'status' - sensor orientation */
-/* If sensor is mounted upside down set both bits */
-#define V4L2_IN_ST_HFLIP       0x00000010 /* Frames are flipped horizontally */
-#define V4L2_IN_ST_VFLIP       0x00000020 /* Frames are flipped vertically */
-
-/* field 'status' - analog */
-#define V4L2_IN_ST_NO_H_LOCK   0x00000100  /* No horizontal sync lock */
-#define V4L2_IN_ST_COLOR_KILL  0x00000200  /* Color killer is active */
-
-/* field 'status' - digital */
-#define V4L2_IN_ST_NO_SYNC     0x00010000  /* No synchronization lock */
-#define V4L2_IN_ST_NO_EQU      0x00020000  /* No equalizer lock */
-#define V4L2_IN_ST_NO_CARRIER  0x00040000  /* Carrier recovery failed */
-
-/* field 'status' - VCR and set-top box */
-#define V4L2_IN_ST_MACROVISION 0x01000000  /* Macrovision detected */
-#define V4L2_IN_ST_NO_ACCESS   0x02000000  /* Conditional access denied */
-#define V4L2_IN_ST_VTR         0x04000000  /* VTR time constant */
-
-/* capabilities flags */
-#define V4L2_IN_CAP_PRESETS		0x00000001 /* Supports S_DV_PRESET */
-#define V4L2_IN_CAP_CUSTOM_TIMINGS	0x00000002 /* Supports S_DV_TIMINGS */
-#define V4L2_IN_CAP_STD			0x00000004 /* Supports S_STD */
-
-/*
- *	V I D E O   O U T P U T S
- */
-struct v4l2_output {
-	__u32	     index;		/*  Which output */
-	__u8	     name[32];		/*  Label */
-	__u32	     type;		/*  Type of output */
-	__u32	     audioset;		/*  Associated audios (bitfield) */
-	__u32	     modulator;         /*  Associated modulator */
-	v4l2_std_id  std;
-	__u32	     capabilities;
-	__u32	     reserved[3];
-};
-/*  Values for the 'type' field */
-#define V4L2_OUTPUT_TYPE_MODULATOR		1
-#define V4L2_OUTPUT_TYPE_ANALOG			2
-#define V4L2_OUTPUT_TYPE_ANALOGVGAOVERLAY	3
-
-/* capabilities flags */
-#define V4L2_OUT_CAP_PRESETS		0x00000001 /* Supports S_DV_PRESET */
-#define V4L2_OUT_CAP_CUSTOM_TIMINGS	0x00000002 /* Supports S_DV_TIMINGS */
-#define V4L2_OUT_CAP_STD		0x00000004 /* Supports S_STD */
-
-/*
- *	C O N T R O L S
- */
-struct v4l2_control {
-	__u32		     id;
-	__s32		     value;
-};
-
-struct v4l2_ext_control {
-	__u32 id;
-	__u32 size;
-	__u32 reserved2[1];
-	union {
-		__s32 value;
-		__s64 value64;
-		char *string;
-	};
-} __attribute__ ((packed));
-
-struct v4l2_ext_controls {
-	__u32 ctrl_class;
-	__u32 count;
-	__u32 error_idx;
-	__u32 reserved[2];
-	struct v4l2_ext_control *controls;
-};
-
-/*  Values for ctrl_class field */
-#define V4L2_CTRL_CLASS_USER 0x00980000	/* Old-style 'user' controls */
-#define V4L2_CTRL_CLASS_MPEG 0x00990000	/* MPEG-compression controls */
-#define V4L2_CTRL_CLASS_CAMERA 0x009a0000	/* Camera class controls */
-#define V4L2_CTRL_CLASS_FM_TX 0x009b0000	/* FM Modulator control class */
-#define V4L2_CTRL_CLASS_FLASH 0x009c0000	/* Camera flash controls */
-#define V4L2_CTRL_CLASS_JPEG 0x009d0000		/* JPEG-compression controls */
-
-#define V4L2_CTRL_ID_MASK      	  (0x0fffffff)
-#define V4L2_CTRL_ID2CLASS(id)    ((id) & 0x0fff0000UL)
-#define V4L2_CTRL_DRIVER_PRIV(id) (((id) & 0xffff) >= 0x1000)
-
-enum v4l2_ctrl_type {
-	V4L2_CTRL_TYPE_INTEGER	     = 1,
-	V4L2_CTRL_TYPE_BOOLEAN	     = 2,
-	V4L2_CTRL_TYPE_MENU	     = 3,
-	V4L2_CTRL_TYPE_BUTTON	     = 4,
-	V4L2_CTRL_TYPE_INTEGER64     = 5,
-	V4L2_CTRL_TYPE_CTRL_CLASS    = 6,
-	V4L2_CTRL_TYPE_STRING        = 7,
-	V4L2_CTRL_TYPE_BITMASK       = 8,
-};
-
-/*  Used in the VIDIOC_QUERYCTRL ioctl for querying controls */
-struct v4l2_queryctrl {
-	__u32		     id;
-	enum v4l2_ctrl_type  type;
-	__u8		     name[32];	/* Whatever */
-	__s32		     minimum;	/* Note signedness */
-	__s32		     maximum;
-	__s32		     step;
-	__s32		     default_value;
-	__u32                flags;
-	__u32		     reserved[2];
-};
-
-/*  Used in the VIDIOC_QUERYMENU ioctl for querying menu items */
-struct v4l2_querymenu {
-	__u32		id;
-	__u32		index;
-	__u8		name[32];	/* Whatever */
-	__u32		reserved;
-};
-
-/*  Control flags  */
-#define V4L2_CTRL_FLAG_DISABLED		0x0001
-#define V4L2_CTRL_FLAG_GRABBED		0x0002
-#define V4L2_CTRL_FLAG_READ_ONLY 	0x0004
-#define V4L2_CTRL_FLAG_UPDATE 		0x0008
-#define V4L2_CTRL_FLAG_INACTIVE 	0x0010
-#define V4L2_CTRL_FLAG_SLIDER 		0x0020
-#define V4L2_CTRL_FLAG_WRITE_ONLY 	0x0040
-#define V4L2_CTRL_FLAG_VOLATILE		0x0080
-
-/*  Query flag, to be ORed with the control ID */
-#define V4L2_CTRL_FLAG_NEXT_CTRL	0x80000000
-
-/*  User-class control IDs defined by V4L2 */
-#define V4L2_CID_MAX_CTRLS		1024
-#define V4L2_CID_BASE			(V4L2_CTRL_CLASS_USER | 0x900)
-#define V4L2_CID_USER_BASE 		V4L2_CID_BASE
-/*  IDs reserved for driver specific controls */
-#define V4L2_CID_PRIVATE_BASE		0x08000000
-
-#define V4L2_CID_USER_CLASS 		(V4L2_CTRL_CLASS_USER | 1)
-#define V4L2_CID_BRIGHTNESS		(V4L2_CID_BASE+0)
-#define V4L2_CID_CONTRAST		(V4L2_CID_BASE+1)
-#define V4L2_CID_SATURATION		(V4L2_CID_BASE+2)
-#define V4L2_CID_HUE			(V4L2_CID_BASE+3)
-#define V4L2_CID_AUDIO_VOLUME		(V4L2_CID_BASE+5)
-#define V4L2_CID_AUDIO_BALANCE		(V4L2_CID_BASE+6)
-#define V4L2_CID_AUDIO_BASS		(V4L2_CID_BASE+7)
-#define V4L2_CID_AUDIO_TREBLE		(V4L2_CID_BASE+8)
-#define V4L2_CID_AUDIO_MUTE		(V4L2_CID_BASE+9)
-#define V4L2_CID_AUDIO_LOUDNESS		(V4L2_CID_BASE+10)
-#define V4L2_CID_BLACK_LEVEL		(V4L2_CID_BASE+11) /* Deprecated */
-#define V4L2_CID_AUTO_WHITE_BALANCE	(V4L2_CID_BASE+12)
-#define V4L2_CID_DO_WHITE_BALANCE	(V4L2_CID_BASE+13)
-#define V4L2_CID_RED_BALANCE		(V4L2_CID_BASE+14)
-#define V4L2_CID_BLUE_BALANCE		(V4L2_CID_BASE+15)
-#define V4L2_CID_GAMMA			(V4L2_CID_BASE+16)
-#define V4L2_CID_WHITENESS		(V4L2_CID_GAMMA) /* Deprecated */
-#define V4L2_CID_EXPOSURE		(V4L2_CID_BASE+17)
-#define V4L2_CID_AUTOGAIN		(V4L2_CID_BASE+18)
-#define V4L2_CID_GAIN			(V4L2_CID_BASE+19)
-#define V4L2_CID_HFLIP			(V4L2_CID_BASE+20)
-#define V4L2_CID_VFLIP			(V4L2_CID_BASE+21)
-
-/* Deprecated; use V4L2_CID_PAN_RESET and V4L2_CID_TILT_RESET */
-#define V4L2_CID_HCENTER		(V4L2_CID_BASE+22)
-#define V4L2_CID_VCENTER		(V4L2_CID_BASE+23)
-
-#define V4L2_CID_POWER_LINE_FREQUENCY	(V4L2_CID_BASE+24)
-enum v4l2_power_line_frequency {
-	V4L2_CID_POWER_LINE_FREQUENCY_DISABLED	= 0,
-	V4L2_CID_POWER_LINE_FREQUENCY_50HZ	= 1,
-	V4L2_CID_POWER_LINE_FREQUENCY_60HZ	= 2,
-	V4L2_CID_POWER_LINE_FREQUENCY_AUTO	= 3,
-};
-#define V4L2_CID_HUE_AUTO			(V4L2_CID_BASE+25)
-#define V4L2_CID_WHITE_BALANCE_TEMPERATURE	(V4L2_CID_BASE+26)
-#define V4L2_CID_SHARPNESS			(V4L2_CID_BASE+27)
-#define V4L2_CID_BACKLIGHT_COMPENSATION 	(V4L2_CID_BASE+28)
-#define V4L2_CID_CHROMA_AGC                     (V4L2_CID_BASE+29)
-#define V4L2_CID_COLOR_KILLER                   (V4L2_CID_BASE+30)
-#define V4L2_CID_COLORFX			(V4L2_CID_BASE+31)
-enum v4l2_colorfx {
-	V4L2_COLORFX_NONE	= 0,
-	V4L2_COLORFX_BW		= 1,
-	V4L2_COLORFX_SEPIA	= 2,
-	V4L2_COLORFX_NEGATIVE = 3,
-	V4L2_COLORFX_EMBOSS = 4,
-	V4L2_COLORFX_SKETCH = 5,
-	V4L2_COLORFX_SKY_BLUE = 6,
-	V4L2_COLORFX_GRASS_GREEN = 7,
-	V4L2_COLORFX_SKIN_WHITEN = 8,
-	V4L2_COLORFX_VIVID = 9,
-};
-#define V4L2_CID_AUTOBRIGHTNESS			(V4L2_CID_BASE+32)
-#define V4L2_CID_BAND_STOP_FILTER		(V4L2_CID_BASE+33)
-
-#define V4L2_CID_ROTATE				(V4L2_CID_BASE+34)
-#define V4L2_CID_BG_COLOR			(V4L2_CID_BASE+35)
-
-#define V4L2_CID_CHROMA_GAIN                    (V4L2_CID_BASE+36)
-
-#define V4L2_CID_ILLUMINATORS_1			(V4L2_CID_BASE+37)
-#define V4L2_CID_ILLUMINATORS_2			(V4L2_CID_BASE+38)
-
-#define V4L2_CID_MIN_BUFFERS_FOR_CAPTURE	(V4L2_CID_BASE+39)
-#define V4L2_CID_MIN_BUFFERS_FOR_OUTPUT		(V4L2_CID_BASE+40)
-
-#define V4L2_CID_ALPHA_COMPONENT		(V4L2_CID_BASE+41)
-
-/* last CID + 1 */
-#define V4L2_CID_LASTP1                         (V4L2_CID_BASE+42)
-
-/*  MPEG-class control IDs defined by V4L2 */
-#define V4L2_CID_MPEG_BASE 			(V4L2_CTRL_CLASS_MPEG | 0x900)
-#define V4L2_CID_MPEG_CLASS 			(V4L2_CTRL_CLASS_MPEG | 1)
-
-/*  MPEG streams, specific to multiplexed streams */
-#define V4L2_CID_MPEG_STREAM_TYPE 		(V4L2_CID_MPEG_BASE+0)
-enum v4l2_mpeg_stream_type {
-	V4L2_MPEG_STREAM_TYPE_MPEG2_PS   = 0, /* MPEG-2 program stream */
-	V4L2_MPEG_STREAM_TYPE_MPEG2_TS   = 1, /* MPEG-2 transport stream */
-	V4L2_MPEG_STREAM_TYPE_MPEG1_SS   = 2, /* MPEG-1 system stream */
-	V4L2_MPEG_STREAM_TYPE_MPEG2_DVD  = 3, /* MPEG-2 DVD-compatible stream */
-	V4L2_MPEG_STREAM_TYPE_MPEG1_VCD  = 4, /* MPEG-1 VCD-compatible stream */
-	V4L2_MPEG_STREAM_TYPE_MPEG2_SVCD = 5, /* MPEG-2 SVCD-compatible stream */
-};
-#define V4L2_CID_MPEG_STREAM_PID_PMT 		(V4L2_CID_MPEG_BASE+1)
-#define V4L2_CID_MPEG_STREAM_PID_AUDIO 		(V4L2_CID_MPEG_BASE+2)
-#define V4L2_CID_MPEG_STREAM_PID_VIDEO 		(V4L2_CID_MPEG_BASE+3)
-#define V4L2_CID_MPEG_STREAM_PID_PCR 		(V4L2_CID_MPEG_BASE+4)
-#define V4L2_CID_MPEG_STREAM_PES_ID_AUDIO 	(V4L2_CID_MPEG_BASE+5)
-#define V4L2_CID_MPEG_STREAM_PES_ID_VIDEO 	(V4L2_CID_MPEG_BASE+6)
-#define V4L2_CID_MPEG_STREAM_VBI_FMT 		(V4L2_CID_MPEG_BASE+7)
-enum v4l2_mpeg_stream_vbi_fmt {
-	V4L2_MPEG_STREAM_VBI_FMT_NONE = 0,  /* No VBI in the MPEG stream */
-	V4L2_MPEG_STREAM_VBI_FMT_IVTV = 1,  /* VBI in private packets, IVTV format */
-};
-
-/*  MPEG audio controls specific to multiplexed streams  */
-#define V4L2_CID_MPEG_AUDIO_SAMPLING_FREQ 	(V4L2_CID_MPEG_BASE+100)
-enum v4l2_mpeg_audio_sampling_freq {
-	V4L2_MPEG_AUDIO_SAMPLING_FREQ_44100 = 0,
-	V4L2_MPEG_AUDIO_SAMPLING_FREQ_48000 = 1,
-	V4L2_MPEG_AUDIO_SAMPLING_FREQ_32000 = 2,
-};
-#define V4L2_CID_MPEG_AUDIO_ENCODING 		(V4L2_CID_MPEG_BASE+101)
-enum v4l2_mpeg_audio_encoding {
-	V4L2_MPEG_AUDIO_ENCODING_LAYER_1 = 0,
-	V4L2_MPEG_AUDIO_ENCODING_LAYER_2 = 1,
-	V4L2_MPEG_AUDIO_ENCODING_LAYER_3 = 2,
-	V4L2_MPEG_AUDIO_ENCODING_AAC     = 3,
-	V4L2_MPEG_AUDIO_ENCODING_AC3     = 4,
-};
-#define V4L2_CID_MPEG_AUDIO_L1_BITRATE 		(V4L2_CID_MPEG_BASE+102)
-enum v4l2_mpeg_audio_l1_bitrate {
-	V4L2_MPEG_AUDIO_L1_BITRATE_32K  = 0,
-	V4L2_MPEG_AUDIO_L1_BITRATE_64K  = 1,
-	V4L2_MPEG_AUDIO_L1_BITRATE_96K  = 2,
-	V4L2_MPEG_AUDIO_L1_BITRATE_128K = 3,
-	V4L2_MPEG_AUDIO_L1_BITRATE_160K = 4,
-	V4L2_MPEG_AUDIO_L1_BITRATE_192K = 5,
-	V4L2_MPEG_AUDIO_L1_BITRATE_224K = 6,
-	V4L2_MPEG_AUDIO_L1_BITRATE_256K = 7,
-	V4L2_MPEG_AUDIO_L1_BITRATE_288K = 8,
-	V4L2_MPEG_AUDIO_L1_BITRATE_320K = 9,
-	V4L2_MPEG_AUDIO_L1_BITRATE_352K = 10,
-	V4L2_MPEG_AUDIO_L1_BITRATE_384K = 11,
-	V4L2_MPEG_AUDIO_L1_BITRATE_416K = 12,
-	V4L2_MPEG_AUDIO_L1_BITRATE_448K = 13,
-};
-#define V4L2_CID_MPEG_AUDIO_L2_BITRATE 		(V4L2_CID_MPEG_BASE+103)
-enum v4l2_mpeg_audio_l2_bitrate {
-	V4L2_MPEG_AUDIO_L2_BITRATE_32K  = 0,
-	V4L2_MPEG_AUDIO_L2_BITRATE_48K  = 1,
-	V4L2_MPEG_AUDIO_L2_BITRATE_56K  = 2,
-	V4L2_MPEG_AUDIO_L2_BITRATE_64K  = 3,
-	V4L2_MPEG_AUDIO_L2_BITRATE_80K  = 4,
-	V4L2_MPEG_AUDIO_L2_BITRATE_96K  = 5,
-	V4L2_MPEG_AUDIO_L2_BITRATE_112K = 6,
-	V4L2_MPEG_AUDIO_L2_BITRATE_128K = 7,
-	V4L2_MPEG_AUDIO_L2_BITRATE_160K = 8,
-	V4L2_MPEG_AUDIO_L2_BITRATE_192K = 9,
-	V4L2_MPEG_AUDIO_L2_BITRATE_224K = 10,
-	V4L2_MPEG_AUDIO_L2_BITRATE_256K = 11,
-	V4L2_MPEG_AUDIO_L2_BITRATE_320K = 12,
-	V4L2_MPEG_AUDIO_L2_BITRATE_384K = 13,
-};
-#define V4L2_CID_MPEG_AUDIO_L3_BITRATE 		(V4L2_CID_MPEG_BASE+104)
-enum v4l2_mpeg_audio_l3_bitrate {
-	V4L2_MPEG_AUDIO_L3_BITRATE_32K  = 0,
-	V4L2_MPEG_AUDIO_L3_BITRATE_40K  = 1,
-	V4L2_MPEG_AUDIO_L3_BITRATE_48K  = 2,
-	V4L2_MPEG_AUDIO_L3_BITRATE_56K  = 3,
-	V4L2_MPEG_AUDIO_L3_BITRATE_64K  = 4,
-	V4L2_MPEG_AUDIO_L3_BITRATE_80K  = 5,
-	V4L2_MPEG_AUDIO_L3_BITRATE_96K  = 6,
-	V4L2_MPEG_AUDIO_L3_BITRATE_112K = 7,
-	V4L2_MPEG_AUDIO_L3_BITRATE_128K = 8,
-	V4L2_MPEG_AUDIO_L3_BITRATE_160K = 9,
-	V4L2_MPEG_AUDIO_L3_BITRATE_192K = 10,
-	V4L2_MPEG_AUDIO_L3_BITRATE_224K = 11,
-	V4L2_MPEG_AUDIO_L3_BITRATE_256K = 12,
-	V4L2_MPEG_AUDIO_L3_BITRATE_320K = 13,
-};
-#define V4L2_CID_MPEG_AUDIO_MODE 		(V4L2_CID_MPEG_BASE+105)
-enum v4l2_mpeg_audio_mode {
-	V4L2_MPEG_AUDIO_MODE_STEREO       = 0,
-	V4L2_MPEG_AUDIO_MODE_JOINT_STEREO = 1,
-	V4L2_MPEG_AUDIO_MODE_DUAL         = 2,
-	V4L2_MPEG_AUDIO_MODE_MONO         = 3,
-};
-#define V4L2_CID_MPEG_AUDIO_MODE_EXTENSION 	(V4L2_CID_MPEG_BASE+106)
-enum v4l2_mpeg_audio_mode_extension {
-	V4L2_MPEG_AUDIO_MODE_EXTENSION_BOUND_4  = 0,
-	V4L2_MPEG_AUDIO_MODE_EXTENSION_BOUND_8  = 1,
-	V4L2_MPEG_AUDIO_MODE_EXTENSION_BOUND_12 = 2,
-	V4L2_MPEG_AUDIO_MODE_EXTENSION_BOUND_16 = 3,
-};
-#define V4L2_CID_MPEG_AUDIO_EMPHASIS 		(V4L2_CID_MPEG_BASE+107)
-enum v4l2_mpeg_audio_emphasis {
-	V4L2_MPEG_AUDIO_EMPHASIS_NONE         = 0,
-	V4L2_MPEG_AUDIO_EMPHASIS_50_DIV_15_uS = 1,
-	V4L2_MPEG_AUDIO_EMPHASIS_CCITT_J17    = 2,
-};
-#define V4L2_CID_MPEG_AUDIO_CRC 		(V4L2_CID_MPEG_BASE+108)
-enum v4l2_mpeg_audio_crc {
-	V4L2_MPEG_AUDIO_CRC_NONE  = 0,
-	V4L2_MPEG_AUDIO_CRC_CRC16 = 1,
-};
-#define V4L2_CID_MPEG_AUDIO_MUTE 		(V4L2_CID_MPEG_BASE+109)
-#define V4L2_CID_MPEG_AUDIO_AAC_BITRATE		(V4L2_CID_MPEG_BASE+110)
-#define V4L2_CID_MPEG_AUDIO_AC3_BITRATE		(V4L2_CID_MPEG_BASE+111)
-enum v4l2_mpeg_audio_ac3_bitrate {
-	V4L2_MPEG_AUDIO_AC3_BITRATE_32K  = 0,
-	V4L2_MPEG_AUDIO_AC3_BITRATE_40K  = 1,
-	V4L2_MPEG_AUDIO_AC3_BITRATE_48K  = 2,
-	V4L2_MPEG_AUDIO_AC3_BITRATE_56K  = 3,
-	V4L2_MPEG_AUDIO_AC3_BITRATE_64K  = 4,
-	V4L2_MPEG_AUDIO_AC3_BITRATE_80K  = 5,
-	V4L2_MPEG_AUDIO_AC3_BITRATE_96K  = 6,
-	V4L2_MPEG_AUDIO_AC3_BITRATE_112K = 7,
-	V4L2_MPEG_AUDIO_AC3_BITRATE_128K = 8,
-	V4L2_MPEG_AUDIO_AC3_BITRATE_160K = 9,
-	V4L2_MPEG_AUDIO_AC3_BITRATE_192K = 10,
-	V4L2_MPEG_AUDIO_AC3_BITRATE_224K = 11,
-	V4L2_MPEG_AUDIO_AC3_BITRATE_256K = 12,
-	V4L2_MPEG_AUDIO_AC3_BITRATE_320K = 13,
-	V4L2_MPEG_AUDIO_AC3_BITRATE_384K = 14,
-	V4L2_MPEG_AUDIO_AC3_BITRATE_448K = 15,
-	V4L2_MPEG_AUDIO_AC3_BITRATE_512K = 16,
-	V4L2_MPEG_AUDIO_AC3_BITRATE_576K = 17,
-	V4L2_MPEG_AUDIO_AC3_BITRATE_640K = 18,
-};
-#define V4L2_CID_MPEG_AUDIO_DEC_PLAYBACK	(V4L2_CID_MPEG_BASE+112)
-enum v4l2_mpeg_audio_dec_playback {
-	V4L2_MPEG_AUDIO_DEC_PLAYBACK_AUTO	    = 0,
-	V4L2_MPEG_AUDIO_DEC_PLAYBACK_STEREO	    = 1,
-	V4L2_MPEG_AUDIO_DEC_PLAYBACK_LEFT	    = 2,
-	V4L2_MPEG_AUDIO_DEC_PLAYBACK_RIGHT	    = 3,
-	V4L2_MPEG_AUDIO_DEC_PLAYBACK_MONO	    = 4,
-	V4L2_MPEG_AUDIO_DEC_PLAYBACK_SWAPPED_STEREO = 5,
-};
-#define V4L2_CID_MPEG_AUDIO_DEC_MULTILINGUAL_PLAYBACK (V4L2_CID_MPEG_BASE+113)
-
-/*  MPEG video controls specific to multiplexed streams */
-#define V4L2_CID_MPEG_VIDEO_ENCODING 		(V4L2_CID_MPEG_BASE+200)
-enum v4l2_mpeg_video_encoding {
-	V4L2_MPEG_VIDEO_ENCODING_MPEG_1     = 0,
-	V4L2_MPEG_VIDEO_ENCODING_MPEG_2     = 1,
-	V4L2_MPEG_VIDEO_ENCODING_MPEG_4_AVC = 2,
-};
-#define V4L2_CID_MPEG_VIDEO_ASPECT 		(V4L2_CID_MPEG_BASE+201)
-enum v4l2_mpeg_video_aspect {
-	V4L2_MPEG_VIDEO_ASPECT_1x1     = 0,
-	V4L2_MPEG_VIDEO_ASPECT_4x3     = 1,
-	V4L2_MPEG_VIDEO_ASPECT_16x9    = 2,
-	V4L2_MPEG_VIDEO_ASPECT_221x100 = 3,
-};
-#define V4L2_CID_MPEG_VIDEO_B_FRAMES 		(V4L2_CID_MPEG_BASE+202)
-#define V4L2_CID_MPEG_VIDEO_GOP_SIZE 		(V4L2_CID_MPEG_BASE+203)
-#define V4L2_CID_MPEG_VIDEO_GOP_CLOSURE 	(V4L2_CID_MPEG_BASE+204)
-#define V4L2_CID_MPEG_VIDEO_PULLDOWN 		(V4L2_CID_MPEG_BASE+205)
-#define V4L2_CID_MPEG_VIDEO_BITRATE_MODE 	(V4L2_CID_MPEG_BASE+206)
-enum v4l2_mpeg_video_bitrate_mode {
-	V4L2_MPEG_VIDEO_BITRATE_MODE_VBR = 0,
-	V4L2_MPEG_VIDEO_BITRATE_MODE_CBR = 1,
-};
-#define V4L2_CID_MPEG_VIDEO_BITRATE 		(V4L2_CID_MPEG_BASE+207)
-#define V4L2_CID_MPEG_VIDEO_BITRATE_PEAK 	(V4L2_CID_MPEG_BASE+208)
-#define V4L2_CID_MPEG_VIDEO_TEMPORAL_DECIMATION (V4L2_CID_MPEG_BASE+209)
-#define V4L2_CID_MPEG_VIDEO_MUTE 		(V4L2_CID_MPEG_BASE+210)
-#define V4L2_CID_MPEG_VIDEO_MUTE_YUV 		(V4L2_CID_MPEG_BASE+211)
-#define V4L2_CID_MPEG_VIDEO_DECODER_SLICE_INTERFACE		(V4L2_CID_MPEG_BASE+212)
-#define V4L2_CID_MPEG_VIDEO_DECODER_MPEG4_DEBLOCK_FILTER	(V4L2_CID_MPEG_BASE+213)
-#define V4L2_CID_MPEG_VIDEO_CYCLIC_INTRA_REFRESH_MB		(V4L2_CID_MPEG_BASE+214)
-#define V4L2_CID_MPEG_VIDEO_FRAME_RC_ENABLE			(V4L2_CID_MPEG_BASE+215)
-#define V4L2_CID_MPEG_VIDEO_HEADER_MODE				(V4L2_CID_MPEG_BASE+216)
-enum v4l2_mpeg_video_header_mode {
-	V4L2_MPEG_VIDEO_HEADER_MODE_SEPARATE			= 0,
-	V4L2_MPEG_VIDEO_HEADER_MODE_JOINED_WITH_1ST_FRAME	= 1,
-
-};
-#define V4L2_CID_MPEG_VIDEO_MAX_REF_PIC			(V4L2_CID_MPEG_BASE+217)
-#define V4L2_CID_MPEG_VIDEO_MB_RC_ENABLE		(V4L2_CID_MPEG_BASE+218)
-#define V4L2_CID_MPEG_VIDEO_MULTI_SLICE_MAX_BYTES	(V4L2_CID_MPEG_BASE+219)
-#define V4L2_CID_MPEG_VIDEO_MULTI_SLICE_MAX_MB		(V4L2_CID_MPEG_BASE+220)
-#define V4L2_CID_MPEG_VIDEO_MULTI_SLICE_MODE		(V4L2_CID_MPEG_BASE+221)
-enum v4l2_mpeg_video_multi_slice_mode {
-	V4L2_MPEG_VIDEO_MULTI_SLICE_MODE_SINGLE		= 0,
-	V4L2_MPEG_VIDEO_MULTI_SICE_MODE_MAX_MB		= 1,
-	V4L2_MPEG_VIDEO_MULTI_SICE_MODE_MAX_BYTES	= 2,
-};
-#define V4L2_CID_MPEG_VIDEO_VBV_SIZE			(V4L2_CID_MPEG_BASE+222)
-#define V4L2_CID_MPEG_VIDEO_DEC_PTS			(V4L2_CID_MPEG_BASE+223)
-#define V4L2_CID_MPEG_VIDEO_DEC_FRAME			(V4L2_CID_MPEG_BASE+224)
-
-#define V4L2_CID_MPEG_VIDEO_H263_I_FRAME_QP		(V4L2_CID_MPEG_BASE+300)
-#define V4L2_CID_MPEG_VIDEO_H263_P_FRAME_QP		(V4L2_CID_MPEG_BASE+301)
-#define V4L2_CID_MPEG_VIDEO_H263_B_FRAME_QP		(V4L2_CID_MPEG_BASE+302)
-#define V4L2_CID_MPEG_VIDEO_H263_MIN_QP			(V4L2_CID_MPEG_BASE+303)
-#define V4L2_CID_MPEG_VIDEO_H263_MAX_QP			(V4L2_CID_MPEG_BASE+304)
-#define V4L2_CID_MPEG_VIDEO_H264_I_FRAME_QP		(V4L2_CID_MPEG_BASE+350)
-#define V4L2_CID_MPEG_VIDEO_H264_P_FRAME_QP		(V4L2_CID_MPEG_BASE+351)
-#define V4L2_CID_MPEG_VIDEO_H264_B_FRAME_QP		(V4L2_CID_MPEG_BASE+352)
-#define V4L2_CID_MPEG_VIDEO_H264_MIN_QP			(V4L2_CID_MPEG_BASE+353)
-#define V4L2_CID_MPEG_VIDEO_H264_MAX_QP			(V4L2_CID_MPEG_BASE+354)
-#define V4L2_CID_MPEG_VIDEO_H264_8X8_TRANSFORM		(V4L2_CID_MPEG_BASE+355)
-#define V4L2_CID_MPEG_VIDEO_H264_CPB_SIZE		(V4L2_CID_MPEG_BASE+356)
-#define V4L2_CID_MPEG_VIDEO_H264_ENTROPY_MODE		(V4L2_CID_MPEG_BASE+357)
-enum v4l2_mpeg_video_h264_entropy_mode {
-	V4L2_MPEG_VIDEO_H264_ENTROPY_MODE_CAVLC	= 0,
-	V4L2_MPEG_VIDEO_H264_ENTROPY_MODE_CABAC	= 1,
-};
-#define V4L2_CID_MPEG_VIDEO_H264_I_PERIOD		(V4L2_CID_MPEG_BASE+358)
-#define V4L2_CID_MPEG_VIDEO_H264_LEVEL			(V4L2_CID_MPEG_BASE+359)
-enum v4l2_mpeg_video_h264_level {
-	V4L2_MPEG_VIDEO_H264_LEVEL_1_0	= 0,
-	V4L2_MPEG_VIDEO_H264_LEVEL_1B	= 1,
-	V4L2_MPEG_VIDEO_H264_LEVEL_1_1	= 2,
-	V4L2_MPEG_VIDEO_H264_LEVEL_1_2	= 3,
-	V4L2_MPEG_VIDEO_H264_LEVEL_1_3	= 4,
-	V4L2_MPEG_VIDEO_H264_LEVEL_2_0	= 5,
-	V4L2_MPEG_VIDEO_H264_LEVEL_2_1	= 6,
-	V4L2_MPEG_VIDEO_H264_LEVEL_2_2	= 7,
-	V4L2_MPEG_VIDEO_H264_LEVEL_3_0	= 8,
-	V4L2_MPEG_VIDEO_H264_LEVEL_3_1	= 9,
-	V4L2_MPEG_VIDEO_H264_LEVEL_3_2	= 10,
-	V4L2_MPEG_VIDEO_H264_LEVEL_4_0	= 11,
-	V4L2_MPEG_VIDEO_H264_LEVEL_4_1	= 12,
-	V4L2_MPEG_VIDEO_H264_LEVEL_4_2	= 13,
-	V4L2_MPEG_VIDEO_H264_LEVEL_5_0	= 14,
-	V4L2_MPEG_VIDEO_H264_LEVEL_5_1	= 15,
-};
-#define V4L2_CID_MPEG_VIDEO_H264_LOOP_FILTER_ALPHA	(V4L2_CID_MPEG_BASE+360)
-#define V4L2_CID_MPEG_VIDEO_H264_LOOP_FILTER_BETA	(V4L2_CID_MPEG_BASE+361)
-#define V4L2_CID_MPEG_VIDEO_H264_LOOP_FILTER_MODE	(V4L2_CID_MPEG_BASE+362)
-enum v4l2_mpeg_video_h264_loop_filter_mode {
-	V4L2_MPEG_VIDEO_H264_LOOP_FILTER_MODE_ENABLED				= 0,
-	V4L2_MPEG_VIDEO_H264_LOOP_FILTER_MODE_DISABLED				= 1,
-	V4L2_MPEG_VIDEO_H264_LOOP_FILTER_MODE_DISABLED_AT_SLICE_BOUNDARY	= 2,
-};
-#define V4L2_CID_MPEG_VIDEO_H264_PROFILE		(V4L2_CID_MPEG_BASE+363)
-enum v4l2_mpeg_video_h264_profile {
-	V4L2_MPEG_VIDEO_H264_PROFILE_BASELINE			= 0,
-	V4L2_MPEG_VIDEO_H264_PROFILE_CONSTRAINED_BASELINE	= 1,
-	V4L2_MPEG_VIDEO_H264_PROFILE_MAIN			= 2,
-	V4L2_MPEG_VIDEO_H264_PROFILE_EXTENDED			= 3,
-	V4L2_MPEG_VIDEO_H264_PROFILE_HIGH			= 4,
-	V4L2_MPEG_VIDEO_H264_PROFILE_HIGH_10			= 5,
-	V4L2_MPEG_VIDEO_H264_PROFILE_HIGH_422			= 6,
-	V4L2_MPEG_VIDEO_H264_PROFILE_HIGH_444_PREDICTIVE	= 7,
-	V4L2_MPEG_VIDEO_H264_PROFILE_HIGH_10_INTRA		= 8,
-	V4L2_MPEG_VIDEO_H264_PROFILE_HIGH_422_INTRA		= 9,
-	V4L2_MPEG_VIDEO_H264_PROFILE_HIGH_444_INTRA		= 10,
-	V4L2_MPEG_VIDEO_H264_PROFILE_CAVLC_444_INTRA		= 11,
-	V4L2_MPEG_VIDEO_H264_PROFILE_SCALABLE_BASELINE		= 12,
-	V4L2_MPEG_VIDEO_H264_PROFILE_SCALABLE_HIGH		= 13,
-	V4L2_MPEG_VIDEO_H264_PROFILE_SCALABLE_HIGH_INTRA	= 14,
-	V4L2_MPEG_VIDEO_H264_PROFILE_STEREO_HIGH		= 15,
-	V4L2_MPEG_VIDEO_H264_PROFILE_MULTIVIEW_HIGH		= 16,
-};
-#define V4L2_CID_MPEG_VIDEO_H264_VUI_EXT_SAR_HEIGHT	(V4L2_CID_MPEG_BASE+364)
-#define V4L2_CID_MPEG_VIDEO_H264_VUI_EXT_SAR_WIDTH	(V4L2_CID_MPEG_BASE+365)
-#define V4L2_CID_MPEG_VIDEO_H264_VUI_SAR_ENABLE		(V4L2_CID_MPEG_BASE+366)
-#define V4L2_CID_MPEG_VIDEO_H264_VUI_SAR_IDC		(V4L2_CID_MPEG_BASE+367)
-enum v4l2_mpeg_video_h264_vui_sar_idc {
-	V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_UNSPECIFIED	= 0,
-	V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_1x1		= 1,
-	V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_12x11		= 2,
-	V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_10x11		= 3,
-	V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_16x11		= 4,
-	V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_40x33		= 5,
-	V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_24x11		= 6,
-	V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_20x11		= 7,
-	V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_32x11		= 8,
-	V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_80x33		= 9,
-	V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_18x11		= 10,
-	V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_15x11		= 11,
-	V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_64x33		= 12,
-	V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_160x99		= 13,
-	V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_4x3		= 14,
-	V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_3x2		= 15,
-	V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_2x1		= 16,
-	V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_EXTENDED	= 17,
-};
-#define V4L2_CID_MPEG_VIDEO_MPEG4_I_FRAME_QP	(V4L2_CID_MPEG_BASE+400)
-#define V4L2_CID_MPEG_VIDEO_MPEG4_P_FRAME_QP	(V4L2_CID_MPEG_BASE+401)
-#define V4L2_CID_MPEG_VIDEO_MPEG4_B_FRAME_QP	(V4L2_CID_MPEG_BASE+402)
-#define V4L2_CID_MPEG_VIDEO_MPEG4_MIN_QP	(V4L2_CID_MPEG_BASE+403)
-#define V4L2_CID_MPEG_VIDEO_MPEG4_MAX_QP	(V4L2_CID_MPEG_BASE+404)
-#define V4L2_CID_MPEG_VIDEO_MPEG4_LEVEL		(V4L2_CID_MPEG_BASE+405)
-enum v4l2_mpeg_video_mpeg4_level {
-	V4L2_MPEG_VIDEO_MPEG4_LEVEL_0	= 0,
-	V4L2_MPEG_VIDEO_MPEG4_LEVEL_0B	= 1,
-	V4L2_MPEG_VIDEO_MPEG4_LEVEL_1	= 2,
-	V4L2_MPEG_VIDEO_MPEG4_LEVEL_2	= 3,
-	V4L2_MPEG_VIDEO_MPEG4_LEVEL_3	= 4,
-	V4L2_MPEG_VIDEO_MPEG4_LEVEL_3B	= 5,
-	V4L2_MPEG_VIDEO_MPEG4_LEVEL_4	= 6,
-	V4L2_MPEG_VIDEO_MPEG4_LEVEL_5	= 7,
-};
-#define V4L2_CID_MPEG_VIDEO_MPEG4_PROFILE	(V4L2_CID_MPEG_BASE+406)
-enum v4l2_mpeg_video_mpeg4_profile {
-	V4L2_MPEG_VIDEO_MPEG4_PROFILE_SIMPLE				= 0,
-	V4L2_MPEG_VIDEO_MPEG4_PROFILE_ADVANCED_SIMPLE			= 1,
-	V4L2_MPEG_VIDEO_MPEG4_PROFILE_CORE				= 2,
-	V4L2_MPEG_VIDEO_MPEG4_PROFILE_SIMPLE_SCALABLE			= 3,
-	V4L2_MPEG_VIDEO_MPEG4_PROFILE_ADVANCED_CODING_EFFICIENCY	= 4,
-};
-#define V4L2_CID_MPEG_VIDEO_MPEG4_QPEL		(V4L2_CID_MPEG_BASE+407)
-
-/*  MPEG-class control IDs specific to the CX2341x driver as defined by V4L2 */
-#define V4L2_CID_MPEG_CX2341X_BASE 				(V4L2_CTRL_CLASS_MPEG | 0x1000)
-#define V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE 	(V4L2_CID_MPEG_CX2341X_BASE+0)
-enum v4l2_mpeg_cx2341x_video_spatial_filter_mode {
-	V4L2_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE_MANUAL = 0,
-	V4L2_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE_AUTO   = 1,
-};
-#define V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER 		(V4L2_CID_MPEG_CX2341X_BASE+1)
-#define V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE 	(V4L2_CID_MPEG_CX2341X_BASE+2)
-enum v4l2_mpeg_cx2341x_video_luma_spatial_filter_type {
-	V4L2_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE_OFF                  = 0,
-	V4L2_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE_1D_HOR               = 1,
-	V4L2_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE_1D_VERT              = 2,
-	V4L2_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE_2D_HV_SEPARABLE      = 3,
-	V4L2_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE_2D_SYM_NON_SEPARABLE = 4,
-};
-#define V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE 	(V4L2_CID_MPEG_CX2341X_BASE+3)
-enum v4l2_mpeg_cx2341x_video_chroma_spatial_filter_type {
-	V4L2_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE_OFF    = 0,
-	V4L2_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE_1D_HOR = 1,
-};
-#define V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE 	(V4L2_CID_MPEG_CX2341X_BASE+4)
-enum v4l2_mpeg_cx2341x_video_temporal_filter_mode {
-	V4L2_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE_MANUAL = 0,
-	V4L2_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE_AUTO   = 1,
-};
-#define V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER 		(V4L2_CID_MPEG_CX2341X_BASE+5)
-#define V4L2_CID_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE 		(V4L2_CID_MPEG_CX2341X_BASE+6)
-enum v4l2_mpeg_cx2341x_video_median_filter_type {
-	V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_OFF      = 0,
-	V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_HOR      = 1,
-	V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_VERT     = 2,
-	V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_HOR_VERT = 3,
-	V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_DIAG     = 4,
-};
-#define V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_MEDIAN_FILTER_BOTTOM 	(V4L2_CID_MPEG_CX2341X_BASE+7)
-#define V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_MEDIAN_FILTER_TOP 	(V4L2_CID_MPEG_CX2341X_BASE+8)
-#define V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_MEDIAN_FILTER_BOTTOM	(V4L2_CID_MPEG_CX2341X_BASE+9)
-#define V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_MEDIAN_FILTER_TOP 	(V4L2_CID_MPEG_CX2341X_BASE+10)
-#define V4L2_CID_MPEG_CX2341X_STREAM_INSERT_NAV_PACKETS 	(V4L2_CID_MPEG_CX2341X_BASE+11)
-
-/*  MPEG-class control IDs specific to the Samsung MFC 5.1 driver as defined by V4L2 */
-#define V4L2_CID_MPEG_MFC51_BASE				(V4L2_CTRL_CLASS_MPEG | 0x1100)
-
-#define V4L2_CID_MPEG_MFC51_VIDEO_DECODER_H264_DISPLAY_DELAY		(V4L2_CID_MPEG_MFC51_BASE+0)
-#define V4L2_CID_MPEG_MFC51_VIDEO_DECODER_H264_DISPLAY_DELAY_ENABLE	(V4L2_CID_MPEG_MFC51_BASE+1)
-#define V4L2_CID_MPEG_MFC51_VIDEO_FRAME_SKIP_MODE			(V4L2_CID_MPEG_MFC51_BASE+2)
-enum v4l2_mpeg_mfc51_video_frame_skip_mode {
-	V4L2_MPEG_MFC51_VIDEO_FRAME_SKIP_MODE_DISABLED		= 0,
-	V4L2_MPEG_MFC51_VIDEO_FRAME_SKIP_MODE_LEVEL_LIMIT	= 1,
-	V4L2_MPEG_MFC51_VIDEO_FRAME_SKIP_MODE_BUF_LIMIT		= 2,
-};
-#define V4L2_CID_MPEG_MFC51_VIDEO_FORCE_FRAME_TYPE			(V4L2_CID_MPEG_MFC51_BASE+3)
-enum v4l2_mpeg_mfc51_video_force_frame_type {
-	V4L2_MPEG_MFC51_VIDEO_FORCE_FRAME_TYPE_DISABLED		= 0,
-	V4L2_MPEG_MFC51_VIDEO_FORCE_FRAME_TYPE_I_FRAME		= 1,
-	V4L2_MPEG_MFC51_VIDEO_FORCE_FRAME_TYPE_NOT_CODED	= 2,
-};
-#define V4L2_CID_MPEG_MFC51_VIDEO_PADDING				(V4L2_CID_MPEG_MFC51_BASE+4)
-#define V4L2_CID_MPEG_MFC51_VIDEO_PADDING_YUV				(V4L2_CID_MPEG_MFC51_BASE+5)
-#define V4L2_CID_MPEG_MFC51_VIDEO_RC_FIXED_TARGET_BIT			(V4L2_CID_MPEG_MFC51_BASE+6)
-#define V4L2_CID_MPEG_MFC51_VIDEO_RC_REACTION_COEFF			(V4L2_CID_MPEG_MFC51_BASE+7)
-#define V4L2_CID_MPEG_MFC51_VIDEO_H264_ADAPTIVE_RC_ACTIVITY		(V4L2_CID_MPEG_MFC51_BASE+50)
-#define V4L2_CID_MPEG_MFC51_VIDEO_H264_ADAPTIVE_RC_DARK			(V4L2_CID_MPEG_MFC51_BASE+51)
-#define V4L2_CID_MPEG_MFC51_VIDEO_H264_ADAPTIVE_RC_SMOOTH		(V4L2_CID_MPEG_MFC51_BASE+52)
-#define V4L2_CID_MPEG_MFC51_VIDEO_H264_ADAPTIVE_RC_STATIC		(V4L2_CID_MPEG_MFC51_BASE+53)
-#define V4L2_CID_MPEG_MFC51_VIDEO_H264_NUM_REF_PIC_FOR_P		(V4L2_CID_MPEG_MFC51_BASE+54)
-
-/*  Camera class control IDs */
-#define V4L2_CID_CAMERA_CLASS_BASE 	(V4L2_CTRL_CLASS_CAMERA | 0x900)
-#define V4L2_CID_CAMERA_CLASS 		(V4L2_CTRL_CLASS_CAMERA | 1)
-
-#define V4L2_CID_EXPOSURE_AUTO			(V4L2_CID_CAMERA_CLASS_BASE+1)
-enum  v4l2_exposure_auto_type {
-	V4L2_EXPOSURE_AUTO = 0,
-	V4L2_EXPOSURE_MANUAL = 1,
-	V4L2_EXPOSURE_SHUTTER_PRIORITY = 2,
-	V4L2_EXPOSURE_APERTURE_PRIORITY = 3
-};
-#define V4L2_CID_EXPOSURE_ABSOLUTE		(V4L2_CID_CAMERA_CLASS_BASE+2)
-#define V4L2_CID_EXPOSURE_AUTO_PRIORITY		(V4L2_CID_CAMERA_CLASS_BASE+3)
-
-#define V4L2_CID_PAN_RELATIVE			(V4L2_CID_CAMERA_CLASS_BASE+4)
-#define V4L2_CID_TILT_RELATIVE			(V4L2_CID_CAMERA_CLASS_BASE+5)
-#define V4L2_CID_PAN_RESET			(V4L2_CID_CAMERA_CLASS_BASE+6)
-#define V4L2_CID_TILT_RESET			(V4L2_CID_CAMERA_CLASS_BASE+7)
-
-#define V4L2_CID_PAN_ABSOLUTE			(V4L2_CID_CAMERA_CLASS_BASE+8)
-#define V4L2_CID_TILT_ABSOLUTE			(V4L2_CID_CAMERA_CLASS_BASE+9)
-
-#define V4L2_CID_FOCUS_ABSOLUTE			(V4L2_CID_CAMERA_CLASS_BASE+10)
-#define V4L2_CID_FOCUS_RELATIVE			(V4L2_CID_CAMERA_CLASS_BASE+11)
-#define V4L2_CID_FOCUS_AUTO			(V4L2_CID_CAMERA_CLASS_BASE+12)
-
-#define V4L2_CID_ZOOM_ABSOLUTE			(V4L2_CID_CAMERA_CLASS_BASE+13)
-#define V4L2_CID_ZOOM_RELATIVE			(V4L2_CID_CAMERA_CLASS_BASE+14)
-#define V4L2_CID_ZOOM_CONTINUOUS		(V4L2_CID_CAMERA_CLASS_BASE+15)
-
-#define V4L2_CID_PRIVACY			(V4L2_CID_CAMERA_CLASS_BASE+16)
-
-#define V4L2_CID_IRIS_ABSOLUTE			(V4L2_CID_CAMERA_CLASS_BASE+17)
-#define V4L2_CID_IRIS_RELATIVE			(V4L2_CID_CAMERA_CLASS_BASE+18)
-
-/* FM Modulator class control IDs */
-#define V4L2_CID_FM_TX_CLASS_BASE		(V4L2_CTRL_CLASS_FM_TX | 0x900)
-#define V4L2_CID_FM_TX_CLASS			(V4L2_CTRL_CLASS_FM_TX | 1)
-
-#define V4L2_CID_RDS_TX_DEVIATION		(V4L2_CID_FM_TX_CLASS_BASE + 1)
-#define V4L2_CID_RDS_TX_PI			(V4L2_CID_FM_TX_CLASS_BASE + 2)
-#define V4L2_CID_RDS_TX_PTY			(V4L2_CID_FM_TX_CLASS_BASE + 3)
-#define V4L2_CID_RDS_TX_PS_NAME			(V4L2_CID_FM_TX_CLASS_BASE + 5)
-#define V4L2_CID_RDS_TX_RADIO_TEXT		(V4L2_CID_FM_TX_CLASS_BASE + 6)
-
-#define V4L2_CID_AUDIO_LIMITER_ENABLED		(V4L2_CID_FM_TX_CLASS_BASE + 64)
-#define V4L2_CID_AUDIO_LIMITER_RELEASE_TIME	(V4L2_CID_FM_TX_CLASS_BASE + 65)
-#define V4L2_CID_AUDIO_LIMITER_DEVIATION	(V4L2_CID_FM_TX_CLASS_BASE + 66)
-
-#define V4L2_CID_AUDIO_COMPRESSION_ENABLED	(V4L2_CID_FM_TX_CLASS_BASE + 80)
-#define V4L2_CID_AUDIO_COMPRESSION_GAIN		(V4L2_CID_FM_TX_CLASS_BASE + 81)
-#define V4L2_CID_AUDIO_COMPRESSION_THRESHOLD	(V4L2_CID_FM_TX_CLASS_BASE + 82)
-#define V4L2_CID_AUDIO_COMPRESSION_ATTACK_TIME	(V4L2_CID_FM_TX_CLASS_BASE + 83)
-#define V4L2_CID_AUDIO_COMPRESSION_RELEASE_TIME	(V4L2_CID_FM_TX_CLASS_BASE + 84)
-
-#define V4L2_CID_PILOT_TONE_ENABLED		(V4L2_CID_FM_TX_CLASS_BASE + 96)
-#define V4L2_CID_PILOT_TONE_DEVIATION		(V4L2_CID_FM_TX_CLASS_BASE + 97)
-#define V4L2_CID_PILOT_TONE_FREQUENCY		(V4L2_CID_FM_TX_CLASS_BASE + 98)
-
-#define V4L2_CID_TUNE_PREEMPHASIS		(V4L2_CID_FM_TX_CLASS_BASE + 112)
-enum v4l2_preemphasis {
-	V4L2_PREEMPHASIS_DISABLED	= 0,
-	V4L2_PREEMPHASIS_50_uS		= 1,
-	V4L2_PREEMPHASIS_75_uS		= 2,
-};
-#define V4L2_CID_TUNE_POWER_LEVEL		(V4L2_CID_FM_TX_CLASS_BASE + 113)
-#define V4L2_CID_TUNE_ANTENNA_CAPACITOR		(V4L2_CID_FM_TX_CLASS_BASE + 114)
-
-/* Flash and privacy (indicator) light controls */
-#define V4L2_CID_FLASH_CLASS_BASE		(V4L2_CTRL_CLASS_FLASH | 0x900)
-#define V4L2_CID_FLASH_CLASS			(V4L2_CTRL_CLASS_FLASH | 1)
-
-#define V4L2_CID_FLASH_LED_MODE			(V4L2_CID_FLASH_CLASS_BASE + 1)
-enum v4l2_flash_led_mode {
-	V4L2_FLASH_LED_MODE_NONE,
-	V4L2_FLASH_LED_MODE_FLASH,
-	V4L2_FLASH_LED_MODE_TORCH,
-};
-
-#define V4L2_CID_FLASH_STROBE_SOURCE		(V4L2_CID_FLASH_CLASS_BASE + 2)
-enum v4l2_flash_strobe_source {
-	V4L2_FLASH_STROBE_SOURCE_SOFTWARE,
-	V4L2_FLASH_STROBE_SOURCE_EXTERNAL,
-};
-
-#define V4L2_CID_FLASH_STROBE			(V4L2_CID_FLASH_CLASS_BASE + 3)
-#define V4L2_CID_FLASH_STROBE_STOP		(V4L2_CID_FLASH_CLASS_BASE + 4)
-#define V4L2_CID_FLASH_STROBE_STATUS		(V4L2_CID_FLASH_CLASS_BASE + 5)
-
-#define V4L2_CID_FLASH_TIMEOUT			(V4L2_CID_FLASH_CLASS_BASE + 6)
-#define V4L2_CID_FLASH_INTENSITY		(V4L2_CID_FLASH_CLASS_BASE + 7)
-#define V4L2_CID_FLASH_TORCH_INTENSITY		(V4L2_CID_FLASH_CLASS_BASE + 8)
-#define V4L2_CID_FLASH_INDICATOR_INTENSITY	(V4L2_CID_FLASH_CLASS_BASE + 9)
-
-#define V4L2_CID_FLASH_FAULT			(V4L2_CID_FLASH_CLASS_BASE + 10)
-#define V4L2_FLASH_FAULT_OVER_VOLTAGE		(1 << 0)
-#define V4L2_FLASH_FAULT_TIMEOUT		(1 << 1)
-#define V4L2_FLASH_FAULT_OVER_TEMPERATURE	(1 << 2)
-#define V4L2_FLASH_FAULT_SHORT_CIRCUIT		(1 << 3)
-#define V4L2_FLASH_FAULT_OVER_CURRENT		(1 << 4)
-#define V4L2_FLASH_FAULT_INDICATOR		(1 << 5)
-
-#define V4L2_CID_FLASH_CHARGE			(V4L2_CID_FLASH_CLASS_BASE + 11)
-#define V4L2_CID_FLASH_READY			(V4L2_CID_FLASH_CLASS_BASE + 12)
-
-/*  JPEG-class control IDs defined by V4L2 */
-#define V4L2_CID_JPEG_CLASS_BASE		(V4L2_CTRL_CLASS_JPEG | 0x900)
-#define V4L2_CID_JPEG_CLASS			(V4L2_CTRL_CLASS_JPEG | 1)
-
-#define	V4L2_CID_JPEG_CHROMA_SUBSAMPLING	(V4L2_CID_JPEG_CLASS_BASE + 1)
-enum v4l2_jpeg_chroma_subsampling {
-	V4L2_JPEG_CHROMA_SUBSAMPLING_444	= 0,
-	V4L2_JPEG_CHROMA_SUBSAMPLING_422	= 1,
-	V4L2_JPEG_CHROMA_SUBSAMPLING_420	= 2,
-	V4L2_JPEG_CHROMA_SUBSAMPLING_411	= 3,
-	V4L2_JPEG_CHROMA_SUBSAMPLING_410	= 4,
-	V4L2_JPEG_CHROMA_SUBSAMPLING_GRAY	= 5,
-};
-#define	V4L2_CID_JPEG_RESTART_INTERVAL		(V4L2_CID_JPEG_CLASS_BASE + 2)
-#define	V4L2_CID_JPEG_COMPRESSION_QUALITY	(V4L2_CID_JPEG_CLASS_BASE + 3)
-
-#define	V4L2_CID_JPEG_ACTIVE_MARKER		(V4L2_CID_JPEG_CLASS_BASE + 4)
-#define	V4L2_JPEG_ACTIVE_MARKER_APP0		(1 << 0)
-#define	V4L2_JPEG_ACTIVE_MARKER_APP1		(1 << 1)
-#define	V4L2_JPEG_ACTIVE_MARKER_COM		(1 << 16)
-#define	V4L2_JPEG_ACTIVE_MARKER_DQT		(1 << 17)
-#define	V4L2_JPEG_ACTIVE_MARKER_DHT		(1 << 18)
-
-/*
- *	T U N I N G
- */
-struct v4l2_tuner {
-	__u32                   index;
-	__u8			name[32];
-	enum v4l2_tuner_type    type;
-	__u32			capability;
-	__u32			rangelow;
-	__u32			rangehigh;
-	__u32			rxsubchans;
-	__u32			audmode;
-	__s32			signal;
-	__s32			afc;
-	__u32			reserved[4];
-};
-
-struct v4l2_modulator {
-	__u32			index;
-	__u8			name[32];
-	__u32			capability;
-	__u32			rangelow;
-	__u32			rangehigh;
-	__u32			txsubchans;
-	__u32			reserved[4];
-};
-
-/*  Flags for the 'capability' field */
-#define V4L2_TUNER_CAP_LOW		0x0001
-#define V4L2_TUNER_CAP_NORM		0x0002
-#define V4L2_TUNER_CAP_STEREO		0x0010
-#define V4L2_TUNER_CAP_LANG2		0x0020
-#define V4L2_TUNER_CAP_SAP		0x0020
-#define V4L2_TUNER_CAP_LANG1		0x0040
-#define V4L2_TUNER_CAP_RDS		0x0080
-#define V4L2_TUNER_CAP_RDS_BLOCK_IO	0x0100
-#define V4L2_TUNER_CAP_RDS_CONTROLS	0x0200
-
-/*  Flags for the 'rxsubchans' field */
-#define V4L2_TUNER_SUB_MONO		0x0001
-#define V4L2_TUNER_SUB_STEREO		0x0002
-#define V4L2_TUNER_SUB_LANG2		0x0004
-#define V4L2_TUNER_SUB_SAP		0x0004
-#define V4L2_TUNER_SUB_LANG1		0x0008
-#define V4L2_TUNER_SUB_RDS		0x0010
-
-/*  Values for the 'audmode' field */
-#define V4L2_TUNER_MODE_MONO		0x0000
-#define V4L2_TUNER_MODE_STEREO		0x0001
-#define V4L2_TUNER_MODE_LANG2		0x0002
-#define V4L2_TUNER_MODE_SAP		0x0002
-#define V4L2_TUNER_MODE_LANG1		0x0003
-#define V4L2_TUNER_MODE_LANG1_LANG2	0x0004
-
-struct v4l2_frequency {
-	__u32		      tuner;
-	enum v4l2_tuner_type  type;
-	__u32		      frequency;
-	__u32		      reserved[8];
-};
-
-struct v4l2_hw_freq_seek {
-	__u32		      tuner;
-	enum v4l2_tuner_type  type;
-	__u32		      seek_upward;
-	__u32		      wrap_around;
-	__u32		      spacing;
-	__u32		      reserved[7];
-};
-
-/*
- *	R D S
- */
-
-struct v4l2_rds_data {
-	__u8 	lsb;
-	__u8 	msb;
-	__u8 	block;
-} __attribute__ ((packed));
-
-#define V4L2_RDS_BLOCK_MSK 	 0x7
-#define V4L2_RDS_BLOCK_A 	 0
-#define V4L2_RDS_BLOCK_B 	 1
-#define V4L2_RDS_BLOCK_C 	 2
-#define V4L2_RDS_BLOCK_D 	 3
-#define V4L2_RDS_BLOCK_C_ALT 	 4
-#define V4L2_RDS_BLOCK_INVALID 	 7
-
-#define V4L2_RDS_BLOCK_CORRECTED 0x40
-#define V4L2_RDS_BLOCK_ERROR 	 0x80
-
-/*
- *	A U D I O
- */
-struct v4l2_audio {
-	__u32	index;
-	__u8	name[32];
-	__u32	capability;
-	__u32	mode;
-	__u32	reserved[2];
-};
-
-/*  Flags for the 'capability' field */
-#define V4L2_AUDCAP_STEREO		0x00001
-#define V4L2_AUDCAP_AVL			0x00002
-
-/*  Flags for the 'mode' field */
-#define V4L2_AUDMODE_AVL		0x00001
-
-struct v4l2_audioout {
-	__u32	index;
-	__u8	name[32];
-	__u32	capability;
-	__u32	mode;
-	__u32	reserved[2];
-};
-
-/*
- *	M P E G   S E R V I C E S
- *
- *	NOTE: EXPERIMENTAL API
- */
-#if 1
-#define V4L2_ENC_IDX_FRAME_I    (0)
-#define V4L2_ENC_IDX_FRAME_P    (1)
-#define V4L2_ENC_IDX_FRAME_B    (2)
-#define V4L2_ENC_IDX_FRAME_MASK (0xf)
-
-struct v4l2_enc_idx_entry {
-	__u64 offset;
-	__u64 pts;
-	__u32 length;
-	__u32 flags;
-	__u32 reserved[2];
-};
-
-#define V4L2_ENC_IDX_ENTRIES (64)
-struct v4l2_enc_idx {
-	__u32 entries;
-	__u32 entries_cap;
-	__u32 reserved[4];
-	struct v4l2_enc_idx_entry entry[V4L2_ENC_IDX_ENTRIES];
-};
-
-
-#define V4L2_ENC_CMD_START      (0)
-#define V4L2_ENC_CMD_STOP       (1)
-#define V4L2_ENC_CMD_PAUSE      (2)
-#define V4L2_ENC_CMD_RESUME     (3)
-
-/* Flags for V4L2_ENC_CMD_STOP */
-#define V4L2_ENC_CMD_STOP_AT_GOP_END    (1 << 0)
-
-struct v4l2_encoder_cmd {
-	__u32 cmd;
-	__u32 flags;
-	union {
-		struct {
-			__u32 data[8];
-		} raw;
-	};
-};
-
-/* Decoder commands */
-#define V4L2_DEC_CMD_START       (0)
-#define V4L2_DEC_CMD_STOP        (1)
-#define V4L2_DEC_CMD_PAUSE       (2)
-#define V4L2_DEC_CMD_RESUME      (3)
-
-/* Flags for V4L2_DEC_CMD_START */
-#define V4L2_DEC_CMD_START_MUTE_AUDIO	(1 << 0)
-
-/* Flags for V4L2_DEC_CMD_PAUSE */
-#define V4L2_DEC_CMD_PAUSE_TO_BLACK	(1 << 0)
-
-/* Flags for V4L2_DEC_CMD_STOP */
-#define V4L2_DEC_CMD_STOP_TO_BLACK	(1 << 0)
-#define V4L2_DEC_CMD_STOP_IMMEDIATELY	(1 << 1)
-
-/* Play format requirements (returned by the driver): */
-
-/* The decoder has no special format requirements */
-#define V4L2_DEC_START_FMT_NONE		(0)
-/* The decoder requires full GOPs */
-#define V4L2_DEC_START_FMT_GOP		(1)
-
-/* The structure must be zeroed before use by the application
-   This ensures it can be extended safely in the future. */
-struct v4l2_decoder_cmd {
-	__u32 cmd;
-	__u32 flags;
-	union {
-		struct {
-			__u64 pts;
-		} stop;
-
-		struct {
-			/* 0 or 1000 specifies normal speed,
-			   1 specifies forward single stepping,
-			   -1 specifies backward single stepping,
-			   >1: playback at speed/1000 of the normal speed,
-			   <-1: reverse playback at (-speed/1000) of the normal speed. */
-			__s32 speed;
-			__u32 format;
-		} start;
-
-		struct {
-			__u32 data[16];
-		} raw;
-	};
-};
-#endif
-
-
-/*
- *	D A T A   S E R V I C E S   ( V B I )
- *
- *	Data services API by Michael Schimek
- */
-
-/* Raw VBI */
-struct v4l2_vbi_format {
-	__u32	sampling_rate;		/* in 1 Hz */
-	__u32	offset;
-	__u32	samples_per_line;
-	__u32	sample_format;		/* V4L2_PIX_FMT_* */
-	__s32	start[2];
-	__u32	count[2];
-	__u32	flags;			/* V4L2_VBI_* */
-	__u32	reserved[2];		/* must be zero */
-};
-
-/*  VBI flags  */
-#define V4L2_VBI_UNSYNC		(1 << 0)
-#define V4L2_VBI_INTERLACED	(1 << 1)
-
-/* Sliced VBI
- *
- *    This implements is a proposal V4L2 API to allow SLICED VBI
- * required for some hardware encoders. It should change without
- * notice in the definitive implementation.
- */
-
-struct v4l2_sliced_vbi_format {
-	__u16   service_set;
-	/* service_lines[0][...] specifies lines 0-23 (1-23 used) of the first field
-	   service_lines[1][...] specifies lines 0-23 (1-23 used) of the second field
-				 (equals frame lines 313-336 for 625 line video
-				  standards, 263-286 for 525 line standards) */
-	__u16   service_lines[2][24];
-	__u32   io_size;
-	__u32   reserved[2];            /* must be zero */
-};
-
-/* Teletext World System Teletext
-   (WST), defined on ITU-R BT.653-2 */
-#define V4L2_SLICED_TELETEXT_B          (0x0001)
-/* Video Program System, defined on ETS 300 231*/
-#define V4L2_SLICED_VPS                 (0x0400)
-/* Closed Caption, defined on EIA-608 */
-#define V4L2_SLICED_CAPTION_525         (0x1000)
-/* Wide Screen System, defined on ITU-R BT1119.1 */
-#define V4L2_SLICED_WSS_625             (0x4000)
-
-#define V4L2_SLICED_VBI_525             (V4L2_SLICED_CAPTION_525)
-#define V4L2_SLICED_VBI_625             (V4L2_SLICED_TELETEXT_B | V4L2_SLICED_VPS | V4L2_SLICED_WSS_625)
-
-struct v4l2_sliced_vbi_cap {
-	__u16   service_set;
-	/* service_lines[0][...] specifies lines 0-23 (1-23 used) of the first field
-	   service_lines[1][...] specifies lines 0-23 (1-23 used) of the second field
-				 (equals frame lines 313-336 for 625 line video
-				  standards, 263-286 for 525 line standards) */
-	__u16   service_lines[2][24];
-	enum v4l2_buf_type type;
-	__u32   reserved[3];    /* must be 0 */
-};
-
-struct v4l2_sliced_vbi_data {
-	__u32   id;
-	__u32   field;          /* 0: first field, 1: second field */
-	__u32   line;           /* 1-23 */
-	__u32   reserved;       /* must be 0 */
-	__u8    data[48];
-};
-
-/*
- * Sliced VBI data inserted into MPEG Streams
- */
-
-/*
- * V4L2_MPEG_STREAM_VBI_FMT_IVTV:
- *
- * Structure of payload contained in an MPEG 2 Private Stream 1 PES Packet in an
- * MPEG-2 Program Pack that contains V4L2_MPEG_STREAM_VBI_FMT_IVTV Sliced VBI
- * data
- *
- * Note, the MPEG-2 Program Pack and Private Stream 1 PES packet header
- * definitions are not included here.  See the MPEG-2 specifications for details
- * on these headers.
- */
-
-/* Line type IDs */
-#define V4L2_MPEG_VBI_IVTV_TELETEXT_B     (1)
-#define V4L2_MPEG_VBI_IVTV_CAPTION_525    (4)
-#define V4L2_MPEG_VBI_IVTV_WSS_625        (5)
-#define V4L2_MPEG_VBI_IVTV_VPS            (7)
-
-struct v4l2_mpeg_vbi_itv0_line {
-	__u8 id;	/* One of V4L2_MPEG_VBI_IVTV_* above */
-	__u8 data[42];	/* Sliced VBI data for the line */
-} __attribute__ ((packed));
-
-struct v4l2_mpeg_vbi_itv0 {
-	__le32 linemask[2]; /* Bitmasks of VBI service lines present */
-	struct v4l2_mpeg_vbi_itv0_line line[35];
-} __attribute__ ((packed));
-
-struct v4l2_mpeg_vbi_ITV0 {
-	struct v4l2_mpeg_vbi_itv0_line line[36];
-} __attribute__ ((packed));
-
-#define V4L2_MPEG_VBI_IVTV_MAGIC0	"itv0"
-#define V4L2_MPEG_VBI_IVTV_MAGIC1	"ITV0"
-
-struct v4l2_mpeg_vbi_fmt_ivtv {
-	__u8 magic[4];
-	union {
-		struct v4l2_mpeg_vbi_itv0 itv0;
-		struct v4l2_mpeg_vbi_ITV0 ITV0;
-	};
-} __attribute__ ((packed));
-
-/*
- *	A G G R E G A T E   S T R U C T U R E S
- */
-
-/**
- * struct v4l2_plane_pix_format - additional, per-plane format definition
- * @sizeimage:		maximum size in bytes required for data, for which
- *			this plane will be used
- * @bytesperline:	distance in bytes between the leftmost pixels in two
- *			adjacent lines
- */
-struct v4l2_plane_pix_format {
-	__u32		sizeimage;
-	__u16		bytesperline;
-	__u16		reserved[7];
-} __attribute__ ((packed));
-
-/**
- * struct v4l2_pix_format_mplane - multiplanar format definition
- * @width:		image width in pixels
- * @height:		image height in pixels
- * @pixelformat:	little endian four character code (fourcc)
- * @field:		field order (for interlaced video)
- * @colorspace:		supplemental to pixelformat
- * @plane_fmt:		per-plane information
- * @num_planes:		number of planes for this format
- */
-struct v4l2_pix_format_mplane {
-	__u32				width;
-	__u32				height;
-	__u32				pixelformat;
-	enum v4l2_field			field;
-	enum v4l2_colorspace		colorspace;
-
-	struct v4l2_plane_pix_format	plane_fmt[VIDEO_MAX_PLANES];
-	__u8				num_planes;
-	__u8				reserved[11];
-} __attribute__ ((packed));
-
-/**
- * struct v4l2_format - stream data format
- * @type:	type of the data stream
- * @pix:	definition of an image format
- * @pix_mp:	definition of a multiplanar image format
- * @win:	definition of an overlaid image
- * @vbi:	raw VBI capture or output parameters
- * @sliced:	sliced VBI capture or output parameters
- * @raw_data:	placeholder for future extensions and custom formats
- */
-struct v4l2_format {
-	enum v4l2_buf_type type;
-	union {
-		struct v4l2_pix_format		pix;     /* V4L2_BUF_TYPE_VIDEO_CAPTURE */
-		struct v4l2_pix_format_mplane	pix_mp;  /* V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE */
-		struct v4l2_window		win;     /* V4L2_BUF_TYPE_VIDEO_OVERLAY */
-		struct v4l2_vbi_format		vbi;     /* V4L2_BUF_TYPE_VBI_CAPTURE */
-		struct v4l2_sliced_vbi_format	sliced;  /* V4L2_BUF_TYPE_SLICED_VBI_CAPTURE */
-		__u8	raw_data[200];                   /* user-defined */
-	} fmt;
-};
-
-/*	Stream type-dependent parameters
- */
-struct v4l2_streamparm {
-	enum v4l2_buf_type type;
-	union {
-		struct v4l2_captureparm	capture;
-		struct v4l2_outputparm	output;
-		__u8	raw_data[200];  /* user-defined */
-	} parm;
-};
-
-/*
- *	E V E N T S
- */
-
-#define V4L2_EVENT_ALL				0
-#define V4L2_EVENT_VSYNC			1
-#define V4L2_EVENT_EOS				2
-#define V4L2_EVENT_CTRL				3
-#define V4L2_EVENT_FRAME_SYNC			4
-#define V4L2_EVENT_PRIVATE_START		0x08000000
-
-/* Payload for V4L2_EVENT_VSYNC */
-struct v4l2_event_vsync {
-	/* Can be V4L2_FIELD_ANY, _NONE, _TOP or _BOTTOM */
-	__u8 field;
-} __attribute__ ((packed));
-
-/* Payload for V4L2_EVENT_CTRL */
-#define V4L2_EVENT_CTRL_CH_VALUE		(1 << 0)
-#define V4L2_EVENT_CTRL_CH_FLAGS		(1 << 1)
-
-struct v4l2_event_ctrl {
-	__u32 changes;
-	__u32 type;
-	union {
-		__s32 value;
-		__s64 value64;
-	};
-	__u32 flags;
-	__s32 minimum;
-	__s32 maximum;
-	__s32 step;
-	__s32 default_value;
-};
-
-struct v4l2_event_frame_sync {
-	__u32 frame_sequence;
-};
-
-struct v4l2_event {
-	__u32				type;
-	union {
-		struct v4l2_event_vsync		vsync;
-		struct v4l2_event_ctrl		ctrl;
-		struct v4l2_event_frame_sync	frame_sync;
-		__u8				data[64];
-	} u;
-	__u32				pending;
-	__u32				sequence;
-	struct timespec			timestamp;
-	__u32				id;
-	__u32				reserved[8];
-};
-
-#define V4L2_EVENT_SUB_FL_SEND_INITIAL		(1 << 0)
-#define V4L2_EVENT_SUB_FL_ALLOW_FEEDBACK	(1 << 1)
-
-struct v4l2_event_subscription {
-	__u32				type;
-	__u32				id;
-	__u32				flags;
-	__u32				reserved[5];
-};
-
-/*
- *	A D V A N C E D   D E B U G G I N G
- *
- *	NOTE: EXPERIMENTAL API, NEVER RELY ON THIS IN APPLICATIONS!
- *	FOR DEBUGGING, TESTING AND INTERNAL USE ONLY!
- */
-
-/* VIDIOC_DBG_G_REGISTER and VIDIOC_DBG_S_REGISTER */
-
-#define V4L2_CHIP_MATCH_HOST       0  /* Match against chip ID on host (0 for the host) */
-#define V4L2_CHIP_MATCH_I2C_DRIVER 1  /* Match against I2C driver name */
-#define V4L2_CHIP_MATCH_I2C_ADDR   2  /* Match against I2C 7-bit address */
-#define V4L2_CHIP_MATCH_AC97       3  /* Match against anciliary AC97 chip */
-
-struct v4l2_dbg_match {
-	__u32 type; /* Match type */
-	union {     /* Match this chip, meaning determined by type */
-		__u32 addr;
-		char name[32];
-	};
-} __attribute__ ((packed));
-
-struct v4l2_dbg_register {
-	struct v4l2_dbg_match match;
-	__u32 size;	/* register size in bytes */
-	__u64 reg;
-	__u64 val;
-} __attribute__ ((packed));
-
-/* VIDIOC_DBG_G_CHIP_IDENT */
-struct v4l2_dbg_chip_ident {
-	struct v4l2_dbg_match match;
-	__u32 ident;       /* chip identifier as specified in <media/v4l2-chip-ident.h> */
-	__u32 revision;    /* chip revision, chip specific */
-} __attribute__ ((packed));
-
-/**
- * struct v4l2_create_buffers - VIDIOC_CREATE_BUFS argument
- * @index:	on return, index of the first created buffer
- * @count:	entry: number of requested buffers,
- *		return: number of created buffers
- * @memory:	buffer memory type
- * @format:	frame format, for which buffers are requested
- * @reserved:	future extensions
- */
-struct v4l2_create_buffers {
-	__u32			index;
-	__u32			count;
-	enum v4l2_memory        memory;
-	struct v4l2_format	format;
-	__u32			reserved[8];
-};
-
-/*
- *	I O C T L   C O D E S   F O R   V I D E O   D E V I C E S
- *
- */
-#define VIDIOC_QUERYCAP		 _IOR('V',  0, struct v4l2_capability)
-#define VIDIOC_RESERVED		  _IO('V',  1)
-#define VIDIOC_ENUM_FMT         _IOWR('V',  2, struct v4l2_fmtdesc)
-#define VIDIOC_G_FMT		_IOWR('V',  4, struct v4l2_format)
-#define VIDIOC_S_FMT		_IOWR('V',  5, struct v4l2_format)
-#define VIDIOC_REQBUFS		_IOWR('V',  8, struct v4l2_requestbuffers)
-#define VIDIOC_QUERYBUF		_IOWR('V',  9, struct v4l2_buffer)
-#define VIDIOC_G_FBUF		 _IOR('V', 10, struct v4l2_framebuffer)
-#define VIDIOC_S_FBUF		 _IOW('V', 11, struct v4l2_framebuffer)
-#define VIDIOC_OVERLAY		 _IOW('V', 14, int)
-#define VIDIOC_QBUF		_IOWR('V', 15, struct v4l2_buffer)
-#define VIDIOC_DQBUF		_IOWR('V', 17, struct v4l2_buffer)
-#define VIDIOC_STREAMON		 _IOW('V', 18, int)
-#define VIDIOC_STREAMOFF	 _IOW('V', 19, int)
-#define VIDIOC_G_PARM		_IOWR('V', 21, struct v4l2_streamparm)
-#define VIDIOC_S_PARM		_IOWR('V', 22, struct v4l2_streamparm)
-#define VIDIOC_G_STD		 _IOR('V', 23, v4l2_std_id)
-#define VIDIOC_S_STD		 _IOW('V', 24, v4l2_std_id)
-#define VIDIOC_ENUMSTD		_IOWR('V', 25, struct v4l2_standard)
-#define VIDIOC_ENUMINPUT	_IOWR('V', 26, struct v4l2_input)
-#define VIDIOC_G_CTRL		_IOWR('V', 27, struct v4l2_control)
-#define VIDIOC_S_CTRL		_IOWR('V', 28, struct v4l2_control)
-#define VIDIOC_G_TUNER		_IOWR('V', 29, struct v4l2_tuner)
-#define VIDIOC_S_TUNER		 _IOW('V', 30, struct v4l2_tuner)
-#define VIDIOC_G_AUDIO		 _IOR('V', 33, struct v4l2_audio)
-#define VIDIOC_S_AUDIO		 _IOW('V', 34, struct v4l2_audio)
-#define VIDIOC_QUERYCTRL	_IOWR('V', 36, struct v4l2_queryctrl)
-#define VIDIOC_QUERYMENU	_IOWR('V', 37, struct v4l2_querymenu)
-#define VIDIOC_G_INPUT		 _IOR('V', 38, int)
-#define VIDIOC_S_INPUT		_IOWR('V', 39, int)
-#define VIDIOC_G_OUTPUT		 _IOR('V', 46, int)
-#define VIDIOC_S_OUTPUT		_IOWR('V', 47, int)
-#define VIDIOC_ENUMOUTPUT	_IOWR('V', 48, struct v4l2_output)
-#define VIDIOC_G_AUDOUT		 _IOR('V', 49, struct v4l2_audioout)
-#define VIDIOC_S_AUDOUT		 _IOW('V', 50, struct v4l2_audioout)
-#define VIDIOC_G_MODULATOR	_IOWR('V', 54, struct v4l2_modulator)
-#define VIDIOC_S_MODULATOR	 _IOW('V', 55, struct v4l2_modulator)
-#define VIDIOC_G_FREQUENCY	_IOWR('V', 56, struct v4l2_frequency)
-#define VIDIOC_S_FREQUENCY	 _IOW('V', 57, struct v4l2_frequency)
-#define VIDIOC_CROPCAP		_IOWR('V', 58, struct v4l2_cropcap)
-#define VIDIOC_G_CROP		_IOWR('V', 59, struct v4l2_crop)
-#define VIDIOC_S_CROP		 _IOW('V', 60, struct v4l2_crop)
-#define VIDIOC_G_JPEGCOMP	 _IOR('V', 61, struct v4l2_jpegcompression)
-#define VIDIOC_S_JPEGCOMP	 _IOW('V', 62, struct v4l2_jpegcompression)
-#define VIDIOC_QUERYSTD      	 _IOR('V', 63, v4l2_std_id)
-#define VIDIOC_TRY_FMT      	_IOWR('V', 64, struct v4l2_format)
-#define VIDIOC_ENUMAUDIO	_IOWR('V', 65, struct v4l2_audio)
-#define VIDIOC_ENUMAUDOUT	_IOWR('V', 66, struct v4l2_audioout)
-#define VIDIOC_G_PRIORITY        _IOR('V', 67, enum v4l2_priority)
-#define VIDIOC_S_PRIORITY        _IOW('V', 68, enum v4l2_priority)
-#define VIDIOC_G_SLICED_VBI_CAP _IOWR('V', 69, struct v4l2_sliced_vbi_cap)
-#define VIDIOC_LOG_STATUS         _IO('V', 70)
-#define VIDIOC_G_EXT_CTRLS	_IOWR('V', 71, struct v4l2_ext_controls)
-#define VIDIOC_S_EXT_CTRLS	_IOWR('V', 72, struct v4l2_ext_controls)
-#define VIDIOC_TRY_EXT_CTRLS	_IOWR('V', 73, struct v4l2_ext_controls)
-#if 1
-#define VIDIOC_ENUM_FRAMESIZES	_IOWR('V', 74, struct v4l2_frmsizeenum)
-#define VIDIOC_ENUM_FRAMEINTERVALS _IOWR('V', 75, struct v4l2_frmivalenum)
-#define VIDIOC_G_ENC_INDEX       _IOR('V', 76, struct v4l2_enc_idx)
-#define VIDIOC_ENCODER_CMD      _IOWR('V', 77, struct v4l2_encoder_cmd)
-#define VIDIOC_TRY_ENCODER_CMD  _IOWR('V', 78, struct v4l2_encoder_cmd)
-#endif
-
-#if 1
-/* Experimental, meant for debugging, testing and internal use.
-   Only implemented if CONFIG_VIDEO_ADV_DEBUG is defined.
-   You must be root to use these ioctls. Never use these in applications! */
-#define	VIDIOC_DBG_S_REGISTER 	 _IOW('V', 79, struct v4l2_dbg_register)
-#define	VIDIOC_DBG_G_REGISTER 	_IOWR('V', 80, struct v4l2_dbg_register)
-
-/* Experimental, meant for debugging, testing and internal use.
-   Never use this ioctl in applications! */
-#define VIDIOC_DBG_G_CHIP_IDENT _IOWR('V', 81, struct v4l2_dbg_chip_ident)
-#endif
-
-#define VIDIOC_S_HW_FREQ_SEEK	 _IOW('V', 82, struct v4l2_hw_freq_seek)
-#define	VIDIOC_ENUM_DV_PRESETS	_IOWR('V', 83, struct v4l2_dv_enum_preset)
-#define	VIDIOC_S_DV_PRESET	_IOWR('V', 84, struct v4l2_dv_preset)
-#define	VIDIOC_G_DV_PRESET	_IOWR('V', 85, struct v4l2_dv_preset)
-#define	VIDIOC_QUERY_DV_PRESET	_IOR('V',  86, struct v4l2_dv_preset)
-#define	VIDIOC_S_DV_TIMINGS	_IOWR('V', 87, struct v4l2_dv_timings)
-#define	VIDIOC_G_DV_TIMINGS	_IOWR('V', 88, struct v4l2_dv_timings)
-#define	VIDIOC_DQEVENT		 _IOR('V', 89, struct v4l2_event)
-#define	VIDIOC_SUBSCRIBE_EVENT	 _IOW('V', 90, struct v4l2_event_subscription)
-#define	VIDIOC_UNSUBSCRIBE_EVENT _IOW('V', 91, struct v4l2_event_subscription)
-
-/* Experimental, the below two ioctls may change over the next couple of kernel
-   versions */
-#define VIDIOC_CREATE_BUFS	_IOWR('V', 92, struct v4l2_create_buffers)
-#define VIDIOC_PREPARE_BUF	_IOWR('V', 93, struct v4l2_buffer)
-
-/* Experimental selection API */
-#define VIDIOC_G_SELECTION	_IOWR('V', 94, struct v4l2_selection)
-#define VIDIOC_S_SELECTION	_IOWR('V', 95, struct v4l2_selection)
-
-/* Experimental, these two ioctls may change over the next couple of kernel
-   versions. */
-#define VIDIOC_DECODER_CMD	_IOWR('V', 96, struct v4l2_decoder_cmd)
-#define VIDIOC_TRY_DECODER_CMD	_IOWR('V', 97, struct v4l2_decoder_cmd)
-
-/* Reminder: when adding new ioctls please add support for them to
-   drivers/media/video/v4l2-compat-ioctl32.c as well! */
-
-#define BASE_VIDIOC_PRIVATE	192		/* 192-255 are private */
-
-#endif /* __LINUX_VIDEODEV2_H */
diff --git a/ANDROID_3.4.5/include/linux/videodev2_wmt.h b/ANDROID_3.4.5/include/linux/videodev2_wmt.h
deleted file mode 100755
index 53d19f51..00000000
--- a/ANDROID_3.4.5/include/linux/videodev2_wmt.h
+++ /dev/null
@@ -1,196 +0,0 @@
-#ifndef __LINUX_VIDEODEV2_WMT_H
-#define __LINUX_VIDEODEV2_WMT_H
-
-#include <linux/videodev2.h>
-
-#define WMT_V4L2_CID_CAMERA_SCENEMODE		0
-#define WMT_V4L2_CID_CAMERA_WHITEBALANCE	1
-#define WMT_V4L2_CID_CAMERA_ANTIBANDING		2
-#define WMT_V4L2_CID_CAMERA_FLASH		3
-#define WMT_V4L2_CID_CAMERA_EXPOSURE		4
-#define WMT_V4L2_CID_HFLIP			5
-#define WMT_V4L2_CID_VFLIP			6
-
-/* CID extensions */
-#define V4L2_CID_CAMERA_SCENE_MODE		(V4L2_CID_PRIVATE_BASE+0)
-enum v4l2_scene_mode {
-	SCENE_MODE_BASE = 0,
-	SCENE_MODE_AUTO = 0,
-	SCENE_MODE_NIGHTSHOT,
-	SCENE_MODE_PORTRAIT,
-	SCENE_MODE_BACK_LIGHT,
-	SCENE_MODE_LANDSCAPE,
-	SCENE_MODE_SPORTS,
-	SCENE_MODE_PARTY_INDOOR,
-	SCENE_MODE_BEACH_SNOW,
-	SCENE_MODE_SUNSET,
-	SCENE_MODE_DUSK_DAWN,
-	SCENE_MODE_FALL_COLOR,
-	SCENE_MODE_FIREWORKS,
-	SCENE_MODE_TEXT,
-	SCENE_MODE_CANDLE_LIGHT,
-	SCENE_MODE_MAX,
-};
-
-#define V4L2_CID_CAMERA_FLASH_MODE		(V4L2_CID_PRIVATE_BASE+1)
-enum v4l2_flash_mode {
-	FLASH_MODE_BASE = 0,
-	FLASH_MODE_OFF = 0,
-	FLASH_MODE_AUTO,
-	FLASH_MODE_ON,
-	FLASH_MODE_TORCH,
-	FLASH_MODE_STROBE,
-	FLASH_MODE_MAX,
-};
-
-#define V4L2_CID_CAMERA_ISO			(V4L2_CID_PRIVATE_BASE+2)
-enum v4l2_iso_mode {
-	ISO_AUTO = 0,
-	ISO_50,
-	ISO_100,
-	ISO_200,
-	ISO_400,
-	ISO_800,
-	ISO_1600,
-	ISO_SPORTS,
-	ISO_NIGHT,
-	ISO_MOVIE,
-	ISO_MAX,
-};
-
-#define V4L2_CID_CAMERA_METERING		(V4L2_CID_PRIVATE_BASE+3)
-enum v4l2_metering_mode {
-	METERING_BASE = 0,
-	METERING_MATRIX,
-	METERING_CENTER,
-	METERING_SPOT,
-	METERING_MAX,
-};
-
-#define V4L2_CID_CAMERA_WDR			(V4L2_CID_PRIVATE_BASE+4)
-enum v4l2_wdr_mode {
-	WDR_OFF,
-	WDR_ON,
-	WDR_MAX,
-};
-
-#define V4L2_CID_CAMERA_ANTI_SHAKE		(V4L2_CID_PRIVATE_BASE+5)
-enum v4l2_anti_shake_mode {
-	ANTI_SHAKE_OFF,
-	ANTI_SHAKE_STILL_ON,
-	ANTI_SHAKE_MOVIE_ON,
-	ANTI_SHAKE_MAX,
-};
-
-#define V4L2_CID_CAMERA_FOCUS_MODE		(V4L2_CID_PRIVATE_BASE+6)
-enum v4l2_focusmode {
-	FOCUS_MODE_AUTO = 0,
-	FOCUS_MODE_MACRO,
-	FOCUS_MODE_FACEDETECT,
-	FOCUS_MODE_AUTO_DEFAULT,
-	FOCUS_MODE_MACRO_DEFAULT,
-	FOCUS_MODE_FACEDETECT_DEFAULT,
-	FOCUS_MODE_INFINITY,
-	FOCUS_MODE_FIXED,
-	FOCUS_MODE_CONTINUOUS,
-	FOCUS_MODE_CONTINUOUS_PICTURE,
-	FOCUS_MODE_CONTINUOUS_PICTURE_MACRO,
-	FOCUS_MODE_CONTINUOUS_VIDEO,
-	FOCUS_MODE_TOUCH,
-	FOCUS_MODE_MAX,
-	FOCUS_MODE_DEFAULT = (1 << 8),
-};
-
-#define V4L2_CID_CAMERA_AUTO_FOCUS_RESULT	(V4L2_CID_PRIVATE_BASE+7)
-enum v4l2_focusresult {
-	FOCUS_RESULT_FOCUSING = 0,
-	FOCUS_RESULT_SUCCEED,
-	FOCUS_RESULT_FAILED,
-};
-
-#define V4L2_CID_CAMERA_FOCUS_POSITION_X	(V4L2_CID_PRIVATE_BASE+8)
-#define V4L2_CID_CAMERA_FOCUS_POSITION_Y	(V4L2_CID_PRIVATE_BASE+9)
-
-#define V4L2_CID_CAMERA_FLASH_MODE_AUTO		(V4L2_CID_PRIVATE_BASE+10)
-
-#define V4L2_CID_CAMERA_ANTI_BANDING		(V4L2_CID_PRIVATE_BASE+11)
-enum v4l2_anti_banding{
-	ANTI_BANDING_AUTO = 0,
-	ANTI_BANDING_50HZ = 1,
-	ANTI_BANDING_60HZ = 2,
-	ANTI_BANDING_OFF = 3,
-};
-
-
-// V4L2_CID_BRIGHTNESS
-enum v4l2_ev_mode {
-	EV_MINUS_4	= -4,
-	EV_MINUS_3	= -3,
-	EV_MINUS_2	= -2,
-	EV_MINUS_1	= -1,
-	EV_DEFAULT	= 0,
-	EV_PLUS_1	= 1,
-	EV_PLUS_2	= 2,
-	EV_PLUS_3	= 3,
-	EV_PLUS_4	= 4,
-	EV_MAX,
-};
-
-// V4L2_CID_DO_WHITE_BALANCE
-enum v4l2_wb_mode {
-	WHITE_BALANCE_BASE = 0,
-	WHITE_BALANCE_AUTO = 0,
-	WHITE_BALANCE_INCANDESCENCE,
-	WHITE_BALANCE_FLUORESCENT,
-	WHITE_BALANCE_DAYLIGHT,
-	WHITE_BALANCE_CLOUDY,
-	WHITE_BALANCE_TWILIGHT,
-	WHITE_BALANCE_SHADE,
-	WHITE_BALANCE_MAX,
-};
-
-// V4L2_CID_CONTRAST
-enum v4l2_contrast_mode {
-	CONTRAST_MINUS_2 = 0,
-	CONTRAST_MINUS_1,
-	CONTRAST_DEFAULT,
-	CONTRAST_PLUS_1,
-	CONTRAST_PLUS_2,
-	CONTRAST_MAX,
-};
-
-// V4L2_CID_SATURATION
-enum v4l2_saturation_mode {
-	SATURATION_MINUS_2 = 0,
-	SATURATION_MINUS_1,
-	SATURATION_DEFAULT,
-	SATURATION_PLUS_1,
-	SATURATION_PLUS_2,
-	SATURATION_MAX,
-};
-
-// V4L2_CID_SHARPNESS
-enum v4l2_sharpness_mode {
-	SHARPNESS_MINUS_2 = 0,
-	SHARPNESS_MINUS_1,
-	SHARPNESS_DEFAULT,
-	SHARPNESS_PLUS_1,
-	SHARPNESS_PLUS_2,
-	SHARPNESS_MAX,
-};
-
-// V4L2_CID_EXPOSURE
-enum v4l2_exposure_mode {
-	EXPOSURE_MINUS_4,
-	EXPOSURE_MINUS_3,
-	EXPOSURE_MINUS_2 = -2,
-	EXPOSURE_MINUS_1 = -1,
-	EXPOSURE_DEFAULT = 0,
-	EXPOSURE_PLUS_1  = 1,
-	EXPOSURE_PLUS_2  = 2,
-	EXPOSURE_PLUS_3,
-	EXPOSURE_PLUS_4,
-	EXPOSURE_MAX
-};
-
-#endif /* #ifndef __LINUX_VIDEODEV2_WMT_H */
diff --git a/ANDROID_3.4.5/include/linux/virtio.h b/ANDROID_3.4.5/include/linux/virtio.h
deleted file mode 100644
index 8efd28ae..00000000
--- a/ANDROID_3.4.5/include/linux/virtio.h
+++ /dev/null
@@ -1,105 +0,0 @@
-#ifndef _LINUX_VIRTIO_H
-#define _LINUX_VIRTIO_H
-/* Everything a virtio driver needs to work with any particular virtio
- * implementation. */
-#include <linux/types.h>
-#include <linux/scatterlist.h>
-#include <linux/spinlock.h>
-#include <linux/device.h>
-#include <linux/mod_devicetable.h>
-#include <linux/gfp.h>
-
-/**
- * virtqueue - a queue to register buffers for sending or receiving.
- * @list: the chain of virtqueues for this device
- * @callback: the function to call when buffers are consumed (can be NULL).
- * @name: the name of this virtqueue (mainly for debugging)
- * @vdev: the virtio device this queue was created for.
- * @priv: a pointer for the virtqueue implementation to use.
- */
-struct virtqueue {
-	struct list_head list;
-	void (*callback)(struct virtqueue *vq);
-	const char *name;
-	struct virtio_device *vdev;
-	void *priv;
-};
-
-int virtqueue_add_buf(struct virtqueue *vq,
-		      struct scatterlist sg[],
-		      unsigned int out_num,
-		      unsigned int in_num,
-		      void *data,
-		      gfp_t gfp);
-
-void virtqueue_kick(struct virtqueue *vq);
-
-bool virtqueue_kick_prepare(struct virtqueue *vq);
-
-void virtqueue_notify(struct virtqueue *vq);
-
-void *virtqueue_get_buf(struct virtqueue *vq, unsigned int *len);
-
-void virtqueue_disable_cb(struct virtqueue *vq);
-
-bool virtqueue_enable_cb(struct virtqueue *vq);
-
-bool virtqueue_enable_cb_delayed(struct virtqueue *vq);
-
-void *virtqueue_detach_unused_buf(struct virtqueue *vq);
-
-unsigned int virtqueue_get_vring_size(struct virtqueue *vq);
-
-/**
- * virtio_device - representation of a device using virtio
- * @index: unique position on the virtio bus
- * @dev: underlying device.
- * @id: the device type identification (used to match it with a driver).
- * @config: the configuration ops for this device.
- * @vqs: the list of virtqueues for this device.
- * @features: the features supported by both driver and device.
- * @priv: private pointer for the driver's use.
- */
-struct virtio_device {
-	int index;
-	struct device dev;
-	struct virtio_device_id id;
-	struct virtio_config_ops *config;
-	struct list_head vqs;
-	/* Note that this is a Linux set_bit-style bitmap. */
-	unsigned long features[1];
-	void *priv;
-};
-
-#define dev_to_virtio(dev) container_of(dev, struct virtio_device, dev)
-int register_virtio_device(struct virtio_device *dev);
-void unregister_virtio_device(struct virtio_device *dev);
-
-/**
- * virtio_driver - operations for a virtio I/O driver
- * @driver: underlying device driver (populate name and owner).
- * @id_table: the ids serviced by this driver.
- * @feature_table: an array of feature numbers supported by this driver.
- * @feature_table_size: number of entries in the feature table array.
- * @probe: the function to call when a device is found.  Returns 0 or -errno.
- * @remove: the function to call when a device is removed.
- * @config_changed: optional function to call when the device configuration
- *    changes; may be called in interrupt context.
- */
-struct virtio_driver {
-	struct device_driver driver;
-	const struct virtio_device_id *id_table;
-	const unsigned int *feature_table;
-	unsigned int feature_table_size;
-	int (*probe)(struct virtio_device *dev);
-	void (*remove)(struct virtio_device *dev);
-	void (*config_changed)(struct virtio_device *dev);
-#ifdef CONFIG_PM
-	int (*freeze)(struct virtio_device *dev);
-	int (*restore)(struct virtio_device *dev);
-#endif
-};
-
-int register_virtio_driver(struct virtio_driver *drv);
-void unregister_virtio_driver(struct virtio_driver *drv);
-#endif /* _LINUX_VIRTIO_H */
diff --git a/ANDROID_3.4.5/include/linux/virtio_9p.h b/ANDROID_3.4.5/include/linux/virtio_9p.h
deleted file mode 100644
index 277c4ad4..00000000
--- a/ANDROID_3.4.5/include/linux/virtio_9p.h
+++ /dev/null
@@ -1,44 +0,0 @@
-#ifndef _LINUX_VIRTIO_9P_H
-#define _LINUX_VIRTIO_9P_H
-/* This header is BSD licensed so anyone can use the definitions to implement
- * compatible drivers/servers.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. Neither the name of IBM nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL IBM OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE. */
-#include <linux/types.h>
-#include <linux/virtio_ids.h>
-#include <linux/virtio_config.h>
-
-/* The feature bitmap for virtio 9P */
-
-/* The mount point is specified in a config variable */
-#define VIRTIO_9P_MOUNT_TAG 0
-
-struct virtio_9p_config {
-	/* length of the tag name */
-	__u16 tag_len;
-	/* non-NULL terminated tag name */
-	__u8 tag[0];
-} __attribute__((packed));
-
-#endif /* _LINUX_VIRTIO_9P_H */
diff --git a/ANDROID_3.4.5/include/linux/virtio_balloon.h b/ANDROID_3.4.5/include/linux/virtio_balloon.h
deleted file mode 100644
index 652dc8be..00000000
--- a/ANDROID_3.4.5/include/linux/virtio_balloon.h
+++ /dev/null
@@ -1,59 +0,0 @@
-#ifndef _LINUX_VIRTIO_BALLOON_H
-#define _LINUX_VIRTIO_BALLOON_H
-/* This header is BSD licensed so anyone can use the definitions to implement
- * compatible drivers/servers.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. Neither the name of IBM nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL IBM OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE. */
-#include <linux/virtio_ids.h>
-#include <linux/virtio_config.h>
-
-/* The feature bitmap for virtio balloon */
-#define VIRTIO_BALLOON_F_MUST_TELL_HOST	0 /* Tell before reclaiming pages */
-#define VIRTIO_BALLOON_F_STATS_VQ	1 /* Memory Stats virtqueue */
-
-/* Size of a PFN in the balloon interface. */
-#define VIRTIO_BALLOON_PFN_SHIFT 12
-
-struct virtio_balloon_config
-{
-	/* Number of pages host wants Guest to give up. */
-	__le32 num_pages;
-	/* Number of pages we've actually got in balloon. */
-	__le32 actual;
-};
-
-#define VIRTIO_BALLOON_S_SWAP_IN  0   /* Amount of memory swapped in */
-#define VIRTIO_BALLOON_S_SWAP_OUT 1   /* Amount of memory swapped out */
-#define VIRTIO_BALLOON_S_MAJFLT   2   /* Number of major faults */
-#define VIRTIO_BALLOON_S_MINFLT   3   /* Number of minor faults */
-#define VIRTIO_BALLOON_S_MEMFREE  4   /* Total amount of free memory */
-#define VIRTIO_BALLOON_S_MEMTOT   5   /* Total amount of memory */
-#define VIRTIO_BALLOON_S_NR       6
-
-struct virtio_balloon_stat {
-	u16 tag;
-	u64 val;
-} __attribute__((packed));
-
-#endif /* _LINUX_VIRTIO_BALLOON_H */
diff --git a/ANDROID_3.4.5/include/linux/virtio_blk.h b/ANDROID_3.4.5/include/linux/virtio_blk.h
deleted file mode 100644
index e0edb40c..00000000
--- a/ANDROID_3.4.5/include/linux/virtio_blk.h
+++ /dev/null
@@ -1,122 +0,0 @@
-#ifndef _LINUX_VIRTIO_BLK_H
-#define _LINUX_VIRTIO_BLK_H
-/* This header is BSD licensed so anyone can use the definitions to implement
- * compatible drivers/servers.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. Neither the name of IBM nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL IBM OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE. */
-#include <linux/types.h>
-#include <linux/virtio_ids.h>
-#include <linux/virtio_config.h>
-
-/* Feature bits */
-#define VIRTIO_BLK_F_BARRIER	0	/* Does host support barriers? */
-#define VIRTIO_BLK_F_SIZE_MAX	1	/* Indicates maximum segment size */
-#define VIRTIO_BLK_F_SEG_MAX	2	/* Indicates maximum # of segments */
-#define VIRTIO_BLK_F_GEOMETRY	4	/* Legacy geometry available  */
-#define VIRTIO_BLK_F_RO		5	/* Disk is read-only */
-#define VIRTIO_BLK_F_BLK_SIZE	6	/* Block size of disk is available*/
-#define VIRTIO_BLK_F_SCSI	7	/* Supports scsi command passthru */
-#define VIRTIO_BLK_F_FLUSH	9	/* Cache flush command support */
-#define VIRTIO_BLK_F_TOPOLOGY	10	/* Topology information is available */
-
-#define VIRTIO_BLK_ID_BYTES	20	/* ID string length */
-
-struct virtio_blk_config {
-	/* The capacity (in 512-byte sectors). */
-	__u64 capacity;
-	/* The maximum segment size (if VIRTIO_BLK_F_SIZE_MAX) */
-	__u32 size_max;
-	/* The maximum number of segments (if VIRTIO_BLK_F_SEG_MAX) */
-	__u32 seg_max;
-	/* geometry the device (if VIRTIO_BLK_F_GEOMETRY) */
-	struct virtio_blk_geometry {
-		__u16 cylinders;
-		__u8 heads;
-		__u8 sectors;
-	} geometry;
-
-	/* block size of device (if VIRTIO_BLK_F_BLK_SIZE) */
-	__u32 blk_size;
-
-	/* the next 4 entries are guarded by VIRTIO_BLK_F_TOPOLOGY  */
-	/* exponent for physical block per logical block. */
-	__u8 physical_block_exp;
-	/* alignment offset in logical blocks. */
-	__u8 alignment_offset;
-	/* minimum I/O size without performance penalty in logical blocks. */
-	__u16 min_io_size;
-	/* optimal sustained I/O size in logical blocks. */
-	__u32 opt_io_size;
-
-} __attribute__((packed));
-
-/*
- * Command types
- *
- * Usage is a bit tricky as some bits are used as flags and some are not.
- *
- * Rules:
- *   VIRTIO_BLK_T_OUT may be combined with VIRTIO_BLK_T_SCSI_CMD or
- *   VIRTIO_BLK_T_BARRIER.  VIRTIO_BLK_T_FLUSH is a command of its own
- *   and may not be combined with any of the other flags.
- */
-
-/* These two define direction. */
-#define VIRTIO_BLK_T_IN		0
-#define VIRTIO_BLK_T_OUT	1
-
-/* This bit says it's a scsi command, not an actual read or write. */
-#define VIRTIO_BLK_T_SCSI_CMD	2
-
-/* Cache flush command */
-#define VIRTIO_BLK_T_FLUSH	4
-
-/* Get device ID command */
-#define VIRTIO_BLK_T_GET_ID    8
-
-/* Barrier before this op. */
-#define VIRTIO_BLK_T_BARRIER	0x80000000
-
-/* This is the first element of the read scatter-gather list. */
-struct virtio_blk_outhdr {
-	/* VIRTIO_BLK_T* */
-	__u32 type;
-	/* io priority. */
-	__u32 ioprio;
-	/* Sector (ie. 512 byte offset) */
-	__u64 sector;
-};
-
-struct virtio_scsi_inhdr {
-	__u32 errors;
-	__u32 data_len;
-	__u32 sense_len;
-	__u32 residual;
-};
-
-/* And this is the final byte of the write scatter-gather list. */
-#define VIRTIO_BLK_S_OK		0
-#define VIRTIO_BLK_S_IOERR	1
-#define VIRTIO_BLK_S_UNSUPP	2
-#endif /* _LINUX_VIRTIO_BLK_H */
diff --git a/ANDROID_3.4.5/include/linux/virtio_config.h b/ANDROID_3.4.5/include/linux/virtio_config.h
deleted file mode 100644
index 7323a339..00000000
--- a/ANDROID_3.4.5/include/linux/virtio_config.h
+++ /dev/null
@@ -1,203 +0,0 @@
-#ifndef _LINUX_VIRTIO_CONFIG_H
-#define _LINUX_VIRTIO_CONFIG_H
-/* This header, excluding the #ifdef __KERNEL__ part, is BSD licensed so
- * anyone can use the definitions to implement compatible drivers/servers.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. Neither the name of IBM nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL IBM OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE. */
-
-/* Virtio devices use a standardized configuration space to define their
- * features and pass configuration information, but each implementation can
- * store and access that space differently. */
-#include <linux/types.h>
-
-/* Status byte for guest to report progress, and synchronize features. */
-/* We have seen device and processed generic fields (VIRTIO_CONFIG_F_VIRTIO) */
-#define VIRTIO_CONFIG_S_ACKNOWLEDGE	1
-/* We have found a driver for the device. */
-#define VIRTIO_CONFIG_S_DRIVER		2
-/* Driver has used its parts of the config, and is happy */
-#define VIRTIO_CONFIG_S_DRIVER_OK	4
-/* We've given up on this device. */
-#define VIRTIO_CONFIG_S_FAILED		0x80
-
-/* Some virtio feature bits (currently bits 28 through 31) are reserved for the
- * transport being used (eg. virtio_ring), the rest are per-device feature
- * bits. */
-#define VIRTIO_TRANSPORT_F_START	28
-#define VIRTIO_TRANSPORT_F_END		32
-
-/* Do we get callbacks when the ring is completely used, even if we've
- * suppressed them? */
-#define VIRTIO_F_NOTIFY_ON_EMPTY	24
-
-#ifdef __KERNEL__
-#include <linux/err.h>
-#include <linux/bug.h>
-#include <linux/virtio.h>
-
-/**
- * virtio_config_ops - operations for configuring a virtio device
- * @get: read the value of a configuration field
- *	vdev: the virtio_device
- *	offset: the offset of the configuration field
- *	buf: the buffer to write the field value into.
- *	len: the length of the buffer
- * @set: write the value of a configuration field
- *	vdev: the virtio_device
- *	offset: the offset of the configuration field
- *	buf: the buffer to read the field value from.
- *	len: the length of the buffer
- * @get_status: read the status byte
- *	vdev: the virtio_device
- *	Returns the status byte
- * @set_status: write the status byte
- *	vdev: the virtio_device
- *	status: the new status byte
- * @request_vqs: request the specified number of virtqueues
- *	vdev: the virtio_device
- *	max_vqs: the max number of virtqueues we want
- *      If supplied, must call before any virtqueues are instantiated.
- *      To modify the max number of virtqueues after request_vqs has been
- *      called, call free_vqs and then request_vqs with a new value.
- * @free_vqs: cleanup resources allocated by request_vqs
- *	vdev: the virtio_device
- *      If supplied, must call after all virtqueues have been deleted.
- * @reset: reset the device
- *	vdev: the virtio device
- *	After this, status and feature negotiation must be done again
- *	Device must not be reset from its vq/config callbacks, or in
- *	parallel with being added/removed.
- * @find_vqs: find virtqueues and instantiate them.
- *	vdev: the virtio_device
- *	nvqs: the number of virtqueues to find
- *	vqs: on success, includes new virtqueues
- *	callbacks: array of callbacks, for each virtqueue
- *	names: array of virtqueue names (mainly for debugging)
- *	Returns 0 on success or error status
- * @del_vqs: free virtqueues found by find_vqs().
- * @get_features: get the array of feature bits for this device.
- *	vdev: the virtio_device
- *	Returns the first 32 feature bits (all we currently need).
- * @finalize_features: confirm what device features we'll be using.
- *	vdev: the virtio_device
- *	This gives the final feature bits for the device: it can change
- *	the dev->feature bits if it wants.
- * @bus_name: return the bus name associated with the device
- *	vdev: the virtio_device
- *      This returns a pointer to the bus name a la pci_name from which
- *      the caller can then copy.
- */
-typedef void vq_callback_t(struct virtqueue *);
-struct virtio_config_ops {
-	void (*get)(struct virtio_device *vdev, unsigned offset,
-		    void *buf, unsigned len);
-	void (*set)(struct virtio_device *vdev, unsigned offset,
-		    const void *buf, unsigned len);
-	u8 (*get_status)(struct virtio_device *vdev);
-	void (*set_status)(struct virtio_device *vdev, u8 status);
-	void (*reset)(struct virtio_device *vdev);
-	int (*find_vqs)(struct virtio_device *, unsigned nvqs,
-			struct virtqueue *vqs[],
-			vq_callback_t *callbacks[],
-			const char *names[]);
-	void (*del_vqs)(struct virtio_device *);
-	u32 (*get_features)(struct virtio_device *vdev);
-	void (*finalize_features)(struct virtio_device *vdev);
-	const char *(*bus_name)(struct virtio_device *vdev);
-};
-
-/* If driver didn't advertise the feature, it will never appear. */
-void virtio_check_driver_offered_feature(const struct virtio_device *vdev,
-					 unsigned int fbit);
-
-/**
- * virtio_has_feature - helper to determine if this device has this feature.
- * @vdev: the device
- * @fbit: the feature bit
- */
-static inline bool virtio_has_feature(const struct virtio_device *vdev,
-				      unsigned int fbit)
-{
-	/* Did you forget to fix assumptions on max features? */
-	if (__builtin_constant_p(fbit))
-		BUILD_BUG_ON(fbit >= 32);
-	else
-		BUG_ON(fbit >= 32);
-
-	if (fbit < VIRTIO_TRANSPORT_F_START)
-		virtio_check_driver_offered_feature(vdev, fbit);
-
-	return test_bit(fbit, vdev->features);
-}
-
-/**
- * virtio_config_val - look for a feature and get a virtio config entry.
- * @vdev: the virtio device
- * @fbit: the feature bit
- * @offset: the type to search for.
- * @val: a pointer to the value to fill in.
- *
- * The return value is -ENOENT if the feature doesn't exist.  Otherwise
- * the config value is copied into whatever is pointed to by v. */
-#define virtio_config_val(vdev, fbit, offset, v) \
-	virtio_config_buf((vdev), (fbit), (offset), (v), sizeof(*v))
-
-#define virtio_config_val_len(vdev, fbit, offset, v, len) \
-	virtio_config_buf((vdev), (fbit), (offset), (v), (len))
-
-static inline int virtio_config_buf(struct virtio_device *vdev,
-				    unsigned int fbit,
-				    unsigned int offset,
-				    void *buf, unsigned len)
-{
-	if (!virtio_has_feature(vdev, fbit))
-		return -ENOENT;
-
-	vdev->config->get(vdev, offset, buf, len);
-	return 0;
-}
-
-static inline
-struct virtqueue *virtio_find_single_vq(struct virtio_device *vdev,
-					vq_callback_t *c, const char *n)
-{
-	vq_callback_t *callbacks[] = { c };
-	const char *names[] = { n };
-	struct virtqueue *vq;
-	int err = vdev->config->find_vqs(vdev, 1, &vq, callbacks, names);
-	if (err < 0)
-		return ERR_PTR(err);
-	return vq;
-}
-
-static inline
-const char *virtio_bus_name(struct virtio_device *vdev)
-{
-	if (!vdev->config->bus_name)
-		return "virtio";
-	return vdev->config->bus_name(vdev);
-}
-
-#endif /* __KERNEL__ */
-#endif /* _LINUX_VIRTIO_CONFIG_H */
diff --git a/ANDROID_3.4.5/include/linux/virtio_console.h b/ANDROID_3.4.5/include/linux/virtio_console.h
deleted file mode 100644
index bdf4b003..00000000
--- a/ANDROID_3.4.5/include/linux/virtio_console.h
+++ /dev/null
@@ -1,77 +0,0 @@
-#ifndef _LINUX_VIRTIO_CONSOLE_H
-#define _LINUX_VIRTIO_CONSOLE_H
-#include <linux/types.h>
-#include <linux/virtio_ids.h>
-#include <linux/virtio_config.h>
-/*
- * This header, excluding the #ifdef __KERNEL__ part, is BSD licensed so
- * anyone can use the definitions to implement compatible drivers/servers:
- *
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. Neither the name of IBM nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL IBM OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- * Copyright (C) Red Hat, Inc., 2009, 2010, 2011
- * Copyright (C) Amit Shah <amit.shah@redhat.com>, 2009, 2010, 2011
- */
-
-/* Feature bits */
-#define VIRTIO_CONSOLE_F_SIZE	0	/* Does host provide console size? */
-#define VIRTIO_CONSOLE_F_MULTIPORT 1	/* Does host provide multiple ports? */
-
-#define VIRTIO_CONSOLE_BAD_ID		(~(u32)0)
-
-struct virtio_console_config {
-	/* colums of the screens */
-	__u16 cols;
-	/* rows of the screens */
-	__u16 rows;
-	/* max. number of ports this device can hold */
-	__u32 max_nr_ports;
-} __attribute__((packed));
-
-/*
- * A message that's passed between the Host and the Guest for a
- * particular port.
- */
-struct virtio_console_control {
-	__u32 id;		/* Port number */
-	__u16 event;		/* The kind of control event (see below) */
-	__u16 value;		/* Extra information for the key */
-};
-
-/* Some events for control messages */
-#define VIRTIO_CONSOLE_DEVICE_READY	0
-#define VIRTIO_CONSOLE_PORT_ADD		1
-#define VIRTIO_CONSOLE_PORT_REMOVE	2
-#define VIRTIO_CONSOLE_PORT_READY	3
-#define VIRTIO_CONSOLE_CONSOLE_PORT	4
-#define VIRTIO_CONSOLE_RESIZE		5
-#define VIRTIO_CONSOLE_PORT_OPEN	6
-#define VIRTIO_CONSOLE_PORT_NAME	7
-
-#ifdef __KERNEL__
-int __init virtio_cons_early_init(int (*put_chars)(u32, const char *, int));
-#endif /* __KERNEL__ */
-
-#endif /* _LINUX_VIRTIO_CONSOLE_H */
diff --git a/ANDROID_3.4.5/include/linux/virtio_ids.h b/ANDROID_3.4.5/include/linux/virtio_ids.h
deleted file mode 100644
index 7529b854..00000000
--- a/ANDROID_3.4.5/include/linux/virtio_ids.h
+++ /dev/null
@@ -1,41 +0,0 @@
-#ifndef _LINUX_VIRTIO_IDS_H
-#define _LINUX_VIRTIO_IDS_H
-/*
- * Virtio IDs
- *
- * This header is BSD licensed so anyone can use the definitions to implement
- * compatible drivers/servers.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. Neither the name of IBM nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL IBM OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE. */
-
-#define VIRTIO_ID_NET		1 /* virtio net */
-#define VIRTIO_ID_BLOCK		2 /* virtio block */
-#define VIRTIO_ID_CONSOLE	3 /* virtio console */
-#define VIRTIO_ID_RNG		4 /* virtio ring */
-#define VIRTIO_ID_BALLOON	5 /* virtio balloon */
-#define VIRTIO_ID_RPMSG		7 /* virtio remote processor messaging */
-#define VIRTIO_ID_SCSI		8 /* virtio scsi */
-#define VIRTIO_ID_9P		9 /* 9p virtio console */
-
-#endif /* _LINUX_VIRTIO_IDS_H */
diff --git a/ANDROID_3.4.5/include/linux/virtio_mmio.h b/ANDROID_3.4.5/include/linux/virtio_mmio.h
deleted file mode 100644
index 5c7b6f0d..00000000
--- a/ANDROID_3.4.5/include/linux/virtio_mmio.h
+++ /dev/null
@@ -1,111 +0,0 @@
-/*
- * Virtio platform device driver
- *
- * Copyright 2011, ARM Ltd.
- *
- * Based on Virtio PCI driver by Anthony Liguori, copyright IBM Corp. 2007
- *
- * This header is BSD licensed so anyone can use the definitions to implement
- * compatible drivers/servers.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. Neither the name of IBM nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL IBM OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-#ifndef _LINUX_VIRTIO_MMIO_H
-#define _LINUX_VIRTIO_MMIO_H
-
-/*
- * Control registers
- */
-
-/* Magic value ("virt" string) - Read Only */
-#define VIRTIO_MMIO_MAGIC_VALUE		0x000
-
-/* Virtio device version - Read Only */
-#define VIRTIO_MMIO_VERSION		0x004
-
-/* Virtio device ID - Read Only */
-#define VIRTIO_MMIO_DEVICE_ID		0x008
-
-/* Virtio vendor ID - Read Only */
-#define VIRTIO_MMIO_VENDOR_ID		0x00c
-
-/* Bitmask of the features supported by the host
- * (32 bits per set) - Read Only */
-#define VIRTIO_MMIO_HOST_FEATURES	0x010
-
-/* Host features set selector - Write Only */
-#define VIRTIO_MMIO_HOST_FEATURES_SEL	0x014
-
-/* Bitmask of features activated by the guest
- * (32 bits per set) - Write Only */
-#define VIRTIO_MMIO_GUEST_FEATURES	0x020
-
-/* Activated features set selector - Write Only */
-#define VIRTIO_MMIO_GUEST_FEATURES_SEL	0x024
-
-/* Guest's memory page size in bytes - Write Only */
-#define VIRTIO_MMIO_GUEST_PAGE_SIZE	0x028
-
-/* Queue selector - Write Only */
-#define VIRTIO_MMIO_QUEUE_SEL		0x030
-
-/* Maximum size of the currently selected queue - Read Only */
-#define VIRTIO_MMIO_QUEUE_NUM_MAX	0x034
-
-/* Queue size for the currently selected queue - Write Only */
-#define VIRTIO_MMIO_QUEUE_NUM		0x038
-
-/* Used Ring alignment for the currently selected queue - Write Only */
-#define VIRTIO_MMIO_QUEUE_ALIGN		0x03c
-
-/* Guest's PFN for the currently selected queue - Read Write */
-#define VIRTIO_MMIO_QUEUE_PFN		0x040
-
-/* Queue notifier - Write Only */
-#define VIRTIO_MMIO_QUEUE_NOTIFY	0x050
-
-/* Interrupt status - Read Only */
-#define VIRTIO_MMIO_INTERRUPT_STATUS	0x060
-
-/* Interrupt acknowledge - Write Only */
-#define VIRTIO_MMIO_INTERRUPT_ACK	0x064
-
-/* Device status register - Read Write */
-#define VIRTIO_MMIO_STATUS		0x070
-
-/* The config space is defined by each driver as
- * the per-driver configuration space - Read Write */
-#define VIRTIO_MMIO_CONFIG		0x100
-
-
-
-/*
- * Interrupt flags (re: interrupt status & acknowledge registers)
- */
-
-#define VIRTIO_MMIO_INT_VRING		(1 << 0)
-#define VIRTIO_MMIO_INT_CONFIG		(1 << 1)
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/virtio_net.h b/ANDROID_3.4.5/include/linux/virtio_net.h
deleted file mode 100644
index 970d5a2a..00000000
--- a/ANDROID_3.4.5/include/linux/virtio_net.h
+++ /dev/null
@@ -1,155 +0,0 @@
-#ifndef _LINUX_VIRTIO_NET_H
-#define _LINUX_VIRTIO_NET_H
-/* This header is BSD licensed so anyone can use the definitions to implement
- * compatible drivers/servers.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. Neither the name of IBM nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL IBM OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE. */
-#include <linux/types.h>
-#include <linux/virtio_ids.h>
-#include <linux/virtio_config.h>
-#include <linux/if_ether.h>
-
-/* The feature bitmap for virtio net */
-#define VIRTIO_NET_F_CSUM	0	/* Host handles pkts w/ partial csum */
-#define VIRTIO_NET_F_GUEST_CSUM	1	/* Guest handles pkts w/ partial csum */
-#define VIRTIO_NET_F_MAC	5	/* Host has given MAC address. */
-#define VIRTIO_NET_F_GSO	6	/* Host handles pkts w/ any GSO type */
-#define VIRTIO_NET_F_GUEST_TSO4	7	/* Guest can handle TSOv4 in. */
-#define VIRTIO_NET_F_GUEST_TSO6	8	/* Guest can handle TSOv6 in. */
-#define VIRTIO_NET_F_GUEST_ECN	9	/* Guest can handle TSO[6] w/ ECN in. */
-#define VIRTIO_NET_F_GUEST_UFO	10	/* Guest can handle UFO in. */
-#define VIRTIO_NET_F_HOST_TSO4	11	/* Host can handle TSOv4 in. */
-#define VIRTIO_NET_F_HOST_TSO6	12	/* Host can handle TSOv6 in. */
-#define VIRTIO_NET_F_HOST_ECN	13	/* Host can handle TSO[6] w/ ECN in. */
-#define VIRTIO_NET_F_HOST_UFO	14	/* Host can handle UFO in. */
-#define VIRTIO_NET_F_MRG_RXBUF	15	/* Host can merge receive buffers. */
-#define VIRTIO_NET_F_STATUS	16	/* virtio_net_config.status available */
-#define VIRTIO_NET_F_CTRL_VQ	17	/* Control channel available */
-#define VIRTIO_NET_F_CTRL_RX	18	/* Control channel RX mode support */
-#define VIRTIO_NET_F_CTRL_VLAN	19	/* Control channel VLAN filtering */
-#define VIRTIO_NET_F_CTRL_RX_EXTRA 20	/* Extra RX mode control support */
-
-#define VIRTIO_NET_S_LINK_UP	1	/* Link is up */
-
-struct virtio_net_config {
-	/* The config defining mac address (if VIRTIO_NET_F_MAC) */
-	__u8 mac[6];
-	/* See VIRTIO_NET_F_STATUS and VIRTIO_NET_S_* above */
-	__u16 status;
-} __attribute__((packed));
-
-/* This is the first element of the scatter-gather list.  If you don't
- * specify GSO or CSUM features, you can simply ignore the header. */
-struct virtio_net_hdr {
-#define VIRTIO_NET_HDR_F_NEEDS_CSUM	1	// Use csum_start, csum_offset
-#define VIRTIO_NET_HDR_F_DATA_VALID	2	// Csum is valid
-	__u8 flags;
-#define VIRTIO_NET_HDR_GSO_NONE		0	// Not a GSO frame
-#define VIRTIO_NET_HDR_GSO_TCPV4	1	// GSO frame, IPv4 TCP (TSO)
-#define VIRTIO_NET_HDR_GSO_UDP		3	// GSO frame, IPv4 UDP (UFO)
-#define VIRTIO_NET_HDR_GSO_TCPV6	4	// GSO frame, IPv6 TCP
-#define VIRTIO_NET_HDR_GSO_ECN		0x80	// TCP has ECN set
-	__u8 gso_type;
-	__u16 hdr_len;		/* Ethernet + IP + tcp/udp hdrs */
-	__u16 gso_size;		/* Bytes to append to hdr_len per frame */
-	__u16 csum_start;	/* Position to start checksumming from */
-	__u16 csum_offset;	/* Offset after that to place checksum */
-};
-
-/* This is the version of the header to use when the MRG_RXBUF
- * feature has been negotiated. */
-struct virtio_net_hdr_mrg_rxbuf {
-	struct virtio_net_hdr hdr;
-	__u16 num_buffers;	/* Number of merged rx buffers */
-};
-
-/*
- * Control virtqueue data structures
- *
- * The control virtqueue expects a header in the first sg entry
- * and an ack/status response in the last entry.  Data for the
- * command goes in between.
- */
-struct virtio_net_ctrl_hdr {
-	__u8 class;
-	__u8 cmd;
-} __attribute__((packed));
-
-typedef __u8 virtio_net_ctrl_ack;
-
-#define VIRTIO_NET_OK     0
-#define VIRTIO_NET_ERR    1
-
-/*
- * Control the RX mode, ie. promisucous, allmulti, etc...
- * All commands require an "out" sg entry containing a 1 byte
- * state value, zero = disable, non-zero = enable.  Commands
- * 0 and 1 are supported with the VIRTIO_NET_F_CTRL_RX feature.
- * Commands 2-5 are added with VIRTIO_NET_F_CTRL_RX_EXTRA.
- */
-#define VIRTIO_NET_CTRL_RX    0
- #define VIRTIO_NET_CTRL_RX_PROMISC      0
- #define VIRTIO_NET_CTRL_RX_ALLMULTI     1
- #define VIRTIO_NET_CTRL_RX_ALLUNI       2
- #define VIRTIO_NET_CTRL_RX_NOMULTI      3
- #define VIRTIO_NET_CTRL_RX_NOUNI        4
- #define VIRTIO_NET_CTRL_RX_NOBCAST      5
-
-/*
- * Control the MAC filter table.
- *
- * The MAC filter table is managed by the hypervisor, the guest should
- * assume the size is infinite.  Filtering should be considered
- * non-perfect, ie. based on hypervisor resources, the guest may
- * received packets from sources not specified in the filter list.
- *
- * In addition to the class/cmd header, the TABLE_SET command requires
- * two out scatterlists.  Each contains a 4 byte count of entries followed
- * by a concatenated byte stream of the ETH_ALEN MAC addresses.  The
- * first sg list contains unicast addresses, the second is for multicast.
- * This functionality is present if the VIRTIO_NET_F_CTRL_RX feature
- * is available.
- */
-struct virtio_net_ctrl_mac {
-	__u32 entries;
-	__u8 macs[][ETH_ALEN];
-} __attribute__((packed));
-
-#define VIRTIO_NET_CTRL_MAC    1
- #define VIRTIO_NET_CTRL_MAC_TABLE_SET        0
-
-/*
- * Control VLAN filtering
- *
- * The VLAN filter table is controlled via a simple ADD/DEL interface.
- * VLAN IDs not added may be filterd by the hypervisor.  Del is the
- * opposite of add.  Both commands expect an out entry containing a 2
- * byte VLAN ID.  VLAN filterting is available with the
- * VIRTIO_NET_F_CTRL_VLAN feature bit.
- */
-#define VIRTIO_NET_CTRL_VLAN       2
- #define VIRTIO_NET_CTRL_VLAN_ADD             0
- #define VIRTIO_NET_CTRL_VLAN_DEL             1
-
-#endif /* _LINUX_VIRTIO_NET_H */
diff --git a/ANDROID_3.4.5/include/linux/virtio_pci.h b/ANDROID_3.4.5/include/linux/virtio_pci.h
deleted file mode 100644
index ea66f3f6..00000000
--- a/ANDROID_3.4.5/include/linux/virtio_pci.h
+++ /dev/null
@@ -1,95 +0,0 @@
-/*
- * Virtio PCI driver
- *
- * This module allows virtio devices to be used over a virtual PCI device.
- * This can be used with QEMU based VMMs like KVM or Xen.
- *
- * Copyright IBM Corp. 2007
- *
- * Authors:
- *  Anthony Liguori  <aliguori@us.ibm.com>
- *
- * This header is BSD licensed so anyone can use the definitions to implement
- * compatible drivers/servers.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. Neither the name of IBM nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL IBM OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-#ifndef _LINUX_VIRTIO_PCI_H
-#define _LINUX_VIRTIO_PCI_H
-
-#include <linux/virtio_config.h>
-
-/* A 32-bit r/o bitmask of the features supported by the host */
-#define VIRTIO_PCI_HOST_FEATURES	0
-
-/* A 32-bit r/w bitmask of features activated by the guest */
-#define VIRTIO_PCI_GUEST_FEATURES	4
-
-/* A 32-bit r/w PFN for the currently selected queue */
-#define VIRTIO_PCI_QUEUE_PFN		8
-
-/* A 16-bit r/o queue size for the currently selected queue */
-#define VIRTIO_PCI_QUEUE_NUM		12
-
-/* A 16-bit r/w queue selector */
-#define VIRTIO_PCI_QUEUE_SEL		14
-
-/* A 16-bit r/w queue notifier */
-#define VIRTIO_PCI_QUEUE_NOTIFY		16
-
-/* An 8-bit device status register.  */
-#define VIRTIO_PCI_STATUS		18
-
-/* An 8-bit r/o interrupt status register.  Reading the value will return the
- * current contents of the ISR and will also clear it.  This is effectively
- * a read-and-acknowledge. */
-#define VIRTIO_PCI_ISR			19
-
-/* The bit of the ISR which indicates a device configuration change. */
-#define VIRTIO_PCI_ISR_CONFIG		0x2
-
-/* MSI-X registers: only enabled if MSI-X is enabled. */
-/* A 16-bit vector for configuration changes. */
-#define VIRTIO_MSI_CONFIG_VECTOR        20
-/* A 16-bit vector for selected queue notifications. */
-#define VIRTIO_MSI_QUEUE_VECTOR         22
-/* Vector value used to disable MSI for queue */
-#define VIRTIO_MSI_NO_VECTOR            0xffff
-
-/* The remaining space is defined by each driver as the per-driver
- * configuration space */
-#define VIRTIO_PCI_CONFIG(dev)		((dev)->msix_enabled ? 24 : 20)
-
-/* Virtio ABI version, this must match exactly */
-#define VIRTIO_PCI_ABI_VERSION		0
-
-/* How many bits to shift physical queue address written to QUEUE_PFN.
- * 12 is historical, and due to x86 page size. */
-#define VIRTIO_PCI_QUEUE_ADDR_SHIFT	12
-
-/* The alignment to use between consumer and producer parts of vring.
- * x86 pagesize again. */
-#define VIRTIO_PCI_VRING_ALIGN		4096
-#endif
diff --git a/ANDROID_3.4.5/include/linux/virtio_ring.h b/ANDROID_3.4.5/include/linux/virtio_ring.h
deleted file mode 100644
index e338730c..00000000
--- a/ANDROID_3.4.5/include/linux/virtio_ring.h
+++ /dev/null
@@ -1,182 +0,0 @@
-#ifndef _LINUX_VIRTIO_RING_H
-#define _LINUX_VIRTIO_RING_H
-/* An interface for efficient virtio implementation, currently for use by KVM
- * and lguest, but hopefully others soon.  Do NOT change this since it will
- * break existing servers and clients.
- *
- * This header is BSD licensed so anyone can use the definitions to implement
- * compatible drivers/servers.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. Neither the name of IBM nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL IBM OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- * Copyright Rusty Russell IBM Corporation 2007. */
-#include <linux/types.h>
-
-/* This marks a buffer as continuing via the next field. */
-#define VRING_DESC_F_NEXT	1
-/* This marks a buffer as write-only (otherwise read-only). */
-#define VRING_DESC_F_WRITE	2
-/* This means the buffer contains a list of buffer descriptors. */
-#define VRING_DESC_F_INDIRECT	4
-
-/* The Host uses this in used->flags to advise the Guest: don't kick me when
- * you add a buffer.  It's unreliable, so it's simply an optimization.  Guest
- * will still kick if it's out of buffers. */
-#define VRING_USED_F_NO_NOTIFY	1
-/* The Guest uses this in avail->flags to advise the Host: don't interrupt me
- * when you consume a buffer.  It's unreliable, so it's simply an
- * optimization.  */
-#define VRING_AVAIL_F_NO_INTERRUPT	1
-
-/* We support indirect buffer descriptors */
-#define VIRTIO_RING_F_INDIRECT_DESC	28
-
-/* The Guest publishes the used index for which it expects an interrupt
- * at the end of the avail ring. Host should ignore the avail->flags field. */
-/* The Host publishes the avail index for which it expects a kick
- * at the end of the used ring. Guest should ignore the used->flags field. */
-#define VIRTIO_RING_F_EVENT_IDX		29
-
-/* Virtio ring descriptors: 16 bytes.  These can chain together via "next". */
-struct vring_desc {
-	/* Address (guest-physical). */
-	__u64 addr;
-	/* Length. */
-	__u32 len;
-	/* The flags as indicated above. */
-	__u16 flags;
-	/* We chain unused descriptors via this, too */
-	__u16 next;
-};
-
-struct vring_avail {
-	__u16 flags;
-	__u16 idx;
-	__u16 ring[];
-};
-
-/* u32 is used here for ids for padding reasons. */
-struct vring_used_elem {
-	/* Index of start of used descriptor chain. */
-	__u32 id;
-	/* Total length of the descriptor chain which was used (written to) */
-	__u32 len;
-};
-
-struct vring_used {
-	__u16 flags;
-	__u16 idx;
-	struct vring_used_elem ring[];
-};
-
-struct vring {
-	unsigned int num;
-
-	struct vring_desc *desc;
-
-	struct vring_avail *avail;
-
-	struct vring_used *used;
-};
-
-/* The standard layout for the ring is a continuous chunk of memory which looks
- * like this.  We assume num is a power of 2.
- *
- * struct vring
- * {
- *	// The actual descriptors (16 bytes each)
- *	struct vring_desc desc[num];
- *
- *	// A ring of available descriptor heads with free-running index.
- *	__u16 avail_flags;
- *	__u16 avail_idx;
- *	__u16 available[num];
- *	__u16 used_event_idx;
- *
- *	// Padding to the next align boundary.
- *	char pad[];
- *
- *	// A ring of used descriptor heads with free-running index.
- *	__u16 used_flags;
- *	__u16 used_idx;
- *	struct vring_used_elem used[num];
- *	__u16 avail_event_idx;
- * };
- */
-/* We publish the used event index at the end of the available ring, and vice
- * versa. They are at the end for backwards compatibility. */
-#define vring_used_event(vr) ((vr)->avail->ring[(vr)->num])
-#define vring_avail_event(vr) (*(__u16 *)&(vr)->used->ring[(vr)->num])
-
-static inline void vring_init(struct vring *vr, unsigned int num, void *p,
-			      unsigned long align)
-{
-	vr->num = num;
-	vr->desc = p;
-	vr->avail = p + num*sizeof(struct vring_desc);
-	vr->used = (void *)(((unsigned long)&vr->avail->ring[num] + sizeof(__u16)
-		+ align-1) & ~(align - 1));
-}
-
-static inline unsigned vring_size(unsigned int num, unsigned long align)
-{
-	return ((sizeof(struct vring_desc) * num + sizeof(__u16) * (3 + num)
-		 + align - 1) & ~(align - 1))
-		+ sizeof(__u16) * 3 + sizeof(struct vring_used_elem) * num;
-}
-
-/* The following is used with USED_EVENT_IDX and AVAIL_EVENT_IDX */
-/* Assuming a given event_idx value from the other size, if
- * we have just incremented index from old to new_idx,
- * should we trigger an event? */
-static inline int vring_need_event(__u16 event_idx, __u16 new_idx, __u16 old)
-{
-	/* Note: Xen has similar logic for notification hold-off
-	 * in include/xen/interface/io/ring.h with req_event and req_prod
-	 * corresponding to event_idx + 1 and new_idx respectively.
-	 * Note also that req_event and req_prod in Xen start at 1,
-	 * event indexes in virtio start at 0. */
-	return (__u16)(new_idx - event_idx - 1) < (__u16)(new_idx - old);
-}
-
-#ifdef __KERNEL__
-#include <linux/irqreturn.h>
-struct virtio_device;
-struct virtqueue;
-
-struct virtqueue *vring_new_virtqueue(unsigned int num,
-				      unsigned int vring_align,
-				      struct virtio_device *vdev,
-				      bool weak_barriers,
-				      void *pages,
-				      void (*notify)(struct virtqueue *vq),
-				      void (*callback)(struct virtqueue *vq),
-				      const char *name);
-void vring_del_virtqueue(struct virtqueue *vq);
-/* Filter out transport-specific feature bits. */
-void vring_transport_features(struct virtio_device *vdev);
-
-irqreturn_t vring_interrupt(int irq, void *_vq);
-#endif /* __KERNEL__ */
-#endif /* _LINUX_VIRTIO_RING_H */
diff --git a/ANDROID_3.4.5/include/linux/virtio_rng.h b/ANDROID_3.4.5/include/linux/virtio_rng.h
deleted file mode 100644
index c4d5de89..00000000
--- a/ANDROID_3.4.5/include/linux/virtio_rng.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef _LINUX_VIRTIO_RNG_H
-#define _LINUX_VIRTIO_RNG_H
-/* This header is BSD licensed so anyone can use the definitions to implement
- * compatible drivers/servers. */
-#include <linux/virtio_ids.h>
-#include <linux/virtio_config.h>
-
-#endif /* _LINUX_VIRTIO_RNG_H */
diff --git a/ANDROID_3.4.5/include/linux/virtio_scsi.h b/ANDROID_3.4.5/include/linux/virtio_scsi.h
deleted file mode 100644
index 8ddeafdc..00000000
--- a/ANDROID_3.4.5/include/linux/virtio_scsi.h
+++ /dev/null
@@ -1,114 +0,0 @@
-#ifndef _LINUX_VIRTIO_SCSI_H
-#define _LINUX_VIRTIO_SCSI_H
-/* This header is BSD licensed so anyone can use the definitions to implement
- * compatible drivers/servers. */
-
-#define VIRTIO_SCSI_CDB_SIZE   32
-#define VIRTIO_SCSI_SENSE_SIZE 96
-
-/* SCSI command request, followed by data-out */
-struct virtio_scsi_cmd_req {
-	u8 lun[8];		/* Logical Unit Number */
-	u64 tag;		/* Command identifier */
-	u8 task_attr;		/* Task attribute */
-	u8 prio;
-	u8 crn;
-	u8 cdb[VIRTIO_SCSI_CDB_SIZE];
-} __packed;
-
-/* Response, followed by sense data and data-in */
-struct virtio_scsi_cmd_resp {
-	u32 sense_len;		/* Sense data length */
-	u32 resid;		/* Residual bytes in data buffer */
-	u16 status_qualifier;	/* Status qualifier */
-	u8 status;		/* Command completion status */
-	u8 response;		/* Response values */
-	u8 sense[VIRTIO_SCSI_SENSE_SIZE];
-} __packed;
-
-/* Task Management Request */
-struct virtio_scsi_ctrl_tmf_req {
-	u32 type;
-	u32 subtype;
-	u8 lun[8];
-	u64 tag;
-} __packed;
-
-struct virtio_scsi_ctrl_tmf_resp {
-	u8 response;
-} __packed;
-
-/* Asynchronous notification query/subscription */
-struct virtio_scsi_ctrl_an_req {
-	u32 type;
-	u8 lun[8];
-	u32 event_requested;
-} __packed;
-
-struct virtio_scsi_ctrl_an_resp {
-	u32 event_actual;
-	u8 response;
-} __packed;
-
-struct virtio_scsi_event {
-	u32 event;
-	u8 lun[8];
-	u32 reason;
-} __packed;
-
-struct virtio_scsi_config {
-	u32 num_queues;
-	u32 seg_max;
-	u32 max_sectors;
-	u32 cmd_per_lun;
-	u32 event_info_size;
-	u32 sense_size;
-	u32 cdb_size;
-	u16 max_channel;
-	u16 max_target;
-	u32 max_lun;
-} __packed;
-
-/* Response codes */
-#define VIRTIO_SCSI_S_OK                       0
-#define VIRTIO_SCSI_S_OVERRUN                  1
-#define VIRTIO_SCSI_S_ABORTED                  2
-#define VIRTIO_SCSI_S_BAD_TARGET               3
-#define VIRTIO_SCSI_S_RESET                    4
-#define VIRTIO_SCSI_S_BUSY                     5
-#define VIRTIO_SCSI_S_TRANSPORT_FAILURE        6
-#define VIRTIO_SCSI_S_TARGET_FAILURE           7
-#define VIRTIO_SCSI_S_NEXUS_FAILURE            8
-#define VIRTIO_SCSI_S_FAILURE                  9
-#define VIRTIO_SCSI_S_FUNCTION_SUCCEEDED       10
-#define VIRTIO_SCSI_S_FUNCTION_REJECTED        11
-#define VIRTIO_SCSI_S_INCORRECT_LUN            12
-
-/* Controlq type codes.  */
-#define VIRTIO_SCSI_T_TMF                      0
-#define VIRTIO_SCSI_T_AN_QUERY                 1
-#define VIRTIO_SCSI_T_AN_SUBSCRIBE             2
-
-/* Valid TMF subtypes.  */
-#define VIRTIO_SCSI_T_TMF_ABORT_TASK           0
-#define VIRTIO_SCSI_T_TMF_ABORT_TASK_SET       1
-#define VIRTIO_SCSI_T_TMF_CLEAR_ACA            2
-#define VIRTIO_SCSI_T_TMF_CLEAR_TASK_SET       3
-#define VIRTIO_SCSI_T_TMF_I_T_NEXUS_RESET      4
-#define VIRTIO_SCSI_T_TMF_LOGICAL_UNIT_RESET   5
-#define VIRTIO_SCSI_T_TMF_QUERY_TASK           6
-#define VIRTIO_SCSI_T_TMF_QUERY_TASK_SET       7
-
-/* Events.  */
-#define VIRTIO_SCSI_T_EVENTS_MISSED            0x80000000
-#define VIRTIO_SCSI_T_NO_EVENT                 0
-#define VIRTIO_SCSI_T_TRANSPORT_RESET          1
-#define VIRTIO_SCSI_T_ASYNC_NOTIFY             2
-
-#define VIRTIO_SCSI_S_SIMPLE                   0
-#define VIRTIO_SCSI_S_ORDERED                  1
-#define VIRTIO_SCSI_S_HEAD                     2
-#define VIRTIO_SCSI_S_ACA                      3
-
-
-#endif /* _LINUX_VIRTIO_SCSI_H */
diff --git a/ANDROID_3.4.5/include/linux/vlynq.h b/ANDROID_3.4.5/include/linux/vlynq.h
deleted file mode 100644
index 017d4a53..00000000
--- a/ANDROID_3.4.5/include/linux/vlynq.h
+++ /dev/null
@@ -1,162 +0,0 @@
-/*
- * Copyright (C) 2006, 2007 Eugene Konev <ejka@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-
-#ifndef __VLYNQ_H__
-#define __VLYNQ_H__
-
-#include <linux/device.h>
-#include <linux/types.h>
-
-struct module;
-
-#define VLYNQ_NUM_IRQS 32
-
-struct vlynq_mapping {
-	u32 size;
-	u32 offset;
-};
-
-enum vlynq_divisor {
-	vlynq_div_auto = 0,
-	vlynq_ldiv1,
-	vlynq_ldiv2,
-	vlynq_ldiv3,
-	vlynq_ldiv4,
-	vlynq_ldiv5,
-	vlynq_ldiv6,
-	vlynq_ldiv7,
-	vlynq_ldiv8,
-	vlynq_rdiv1,
-	vlynq_rdiv2,
-	vlynq_rdiv3,
-	vlynq_rdiv4,
-	vlynq_rdiv5,
-	vlynq_rdiv6,
-	vlynq_rdiv7,
-	vlynq_rdiv8,
-	vlynq_div_external
-};
-
-struct vlynq_device_id {
-	u32 id;
-	enum vlynq_divisor divisor;
-	unsigned long driver_data;
-};
-
-struct vlynq_regs;
-struct vlynq_device {
-	u32 id, dev_id;
-	int local_irq;
-	int remote_irq;
-	enum vlynq_divisor divisor;
-	u32 regs_start, regs_end;
-	u32 mem_start, mem_end;
-	u32 irq_start, irq_end;
-	int irq;
-	int enabled;
-	struct vlynq_regs *local;
-	struct vlynq_regs *remote;
-	struct device dev;
-};
-
-struct vlynq_driver {
-	char *name;
-	struct vlynq_device_id *id_table;
-	int (*probe)(struct vlynq_device *dev, struct vlynq_device_id *id);
-	void (*remove)(struct vlynq_device *dev);
-	struct device_driver driver;
-};
-
-struct plat_vlynq_ops {
-	int (*on)(struct vlynq_device *dev);
-	void (*off)(struct vlynq_device *dev);
-};
-
-static inline struct vlynq_driver *to_vlynq_driver(struct device_driver *drv)
-{
-	return container_of(drv, struct vlynq_driver, driver);
-}
-
-static inline struct vlynq_device *to_vlynq_device(struct device *device)
-{
-	return container_of(device, struct vlynq_device, dev);
-}
-
-extern struct bus_type vlynq_bus_type;
-
-extern int __vlynq_register_driver(struct vlynq_driver *driver,
-				   struct module *owner);
-
-static inline int vlynq_register_driver(struct vlynq_driver *driver)
-{
-	return __vlynq_register_driver(driver, THIS_MODULE);
-}
-
-static inline void *vlynq_get_drvdata(struct vlynq_device *dev)
-{
-	return dev_get_drvdata(&dev->dev);
-}
-
-static inline void vlynq_set_drvdata(struct vlynq_device *dev, void *data)
-{
-	dev_set_drvdata(&dev->dev, data);
-}
-
-static inline u32 vlynq_mem_start(struct vlynq_device *dev)
-{
-	return dev->mem_start;
-}
-
-static inline u32 vlynq_mem_end(struct vlynq_device *dev)
-{
-	return dev->mem_end;
-}
-
-static inline u32 vlynq_mem_len(struct vlynq_device *dev)
-{
-	return dev->mem_end - dev->mem_start + 1;
-}
-
-static inline int vlynq_virq_to_irq(struct vlynq_device *dev, int virq)
-{
-	int irq = dev->irq_start + virq;
-	if ((irq < dev->irq_start) || (irq > dev->irq_end))
-		return -EINVAL;
-
-	return irq;
-}
-
-static inline int vlynq_irq_to_virq(struct vlynq_device *dev, int irq)
-{
-	if ((irq < dev->irq_start) || (irq > dev->irq_end))
-		return -EINVAL;
-
-	return irq - dev->irq_start;
-}
-
-extern void vlynq_unregister_driver(struct vlynq_driver *driver);
-extern int vlynq_enable_device(struct vlynq_device *dev);
-extern void vlynq_disable_device(struct vlynq_device *dev);
-extern int vlynq_set_local_mapping(struct vlynq_device *dev, u32 tx_offset,
-				   struct vlynq_mapping *mapping);
-extern int vlynq_set_remote_mapping(struct vlynq_device *dev, u32 tx_offset,
-				    struct vlynq_mapping *mapping);
-extern int vlynq_set_local_irq(struct vlynq_device *dev, int virq);
-extern int vlynq_set_remote_irq(struct vlynq_device *dev, int virq);
-
-#endif /* __VLYNQ_H__ */
diff --git a/ANDROID_3.4.5/include/linux/vm_event_item.h b/ANDROID_3.4.5/include/linux/vm_event_item.h
deleted file mode 100644
index 06f8e385..00000000
--- a/ANDROID_3.4.5/include/linux/vm_event_item.h
+++ /dev/null
@@ -1,65 +0,0 @@
-#ifndef VM_EVENT_ITEM_H_INCLUDED
-#define VM_EVENT_ITEM_H_INCLUDED
-
-#ifdef CONFIG_ZONE_DMA
-#define DMA_ZONE(xx) xx##_DMA,
-#else
-#define DMA_ZONE(xx)
-#endif
-
-#ifdef CONFIG_ZONE_DMA32
-#define DMA32_ZONE(xx) xx##_DMA32,
-#else
-#define DMA32_ZONE(xx)
-#endif
-
-#ifdef CONFIG_HIGHMEM
-#define HIGHMEM_ZONE(xx) , xx##_HIGH
-#else
-#define HIGHMEM_ZONE(xx)
-#endif
-
-#define FOR_ALL_ZONES(xx) DMA_ZONE(xx) DMA32_ZONE(xx) xx##_NORMAL HIGHMEM_ZONE(xx) , xx##_MOVABLE
-
-enum vm_event_item { PGPGIN, PGPGOUT, PSWPIN, PSWPOUT,
-		FOR_ALL_ZONES(PGALLOC),
-		PGFREE, PGACTIVATE, PGDEACTIVATE,
-		PGFAULT, PGMAJFAULT,
-		FOR_ALL_ZONES(PGREFILL),
-		FOR_ALL_ZONES(PGSTEAL_KSWAPD),
-		FOR_ALL_ZONES(PGSTEAL_DIRECT),
-		FOR_ALL_ZONES(PGSCAN_KSWAPD),
-		FOR_ALL_ZONES(PGSCAN_DIRECT),
-#ifdef CONFIG_NUMA
-		PGSCAN_ZONE_RECLAIM_FAILED,
-#endif
-		PGINODESTEAL, SLABS_SCANNED, KSWAPD_INODESTEAL,
-		KSWAPD_LOW_WMARK_HIT_QUICKLY, KSWAPD_HIGH_WMARK_HIT_QUICKLY,
-		KSWAPD_SKIP_CONGESTION_WAIT,
-		PAGEOUTRUN, ALLOCSTALL, PGROTATED,
-#ifdef CONFIG_COMPACTION
-		COMPACTBLOCKS, COMPACTPAGES, COMPACTPAGEFAILED,
-		COMPACTSTALL, COMPACTFAIL, COMPACTSUCCESS,
-#endif
-#ifdef CONFIG_HUGETLB_PAGE
-		HTLB_BUDDY_PGALLOC, HTLB_BUDDY_PGALLOC_FAIL,
-#endif
-		UNEVICTABLE_PGCULLED,	/* culled to noreclaim list */
-		UNEVICTABLE_PGSCANNED,	/* scanned for reclaimability */
-		UNEVICTABLE_PGRESCUED,	/* rescued from noreclaim list */
-		UNEVICTABLE_PGMLOCKED,
-		UNEVICTABLE_PGMUNLOCKED,
-		UNEVICTABLE_PGCLEARED,	/* on COW, page truncate */
-		UNEVICTABLE_PGSTRANDED,	/* unable to isolate on unlock */
-		UNEVICTABLE_MLOCKFREED,
-#ifdef CONFIG_TRANSPARENT_HUGEPAGE
-		THP_FAULT_ALLOC,
-		THP_FAULT_FALLBACK,
-		THP_COLLAPSE_ALLOC,
-		THP_COLLAPSE_ALLOC_FAILED,
-		THP_SPLIT,
-#endif
-		NR_VM_EVENT_ITEMS
-};
-
-#endif		/* VM_EVENT_ITEM_H_INCLUDED */
diff --git a/ANDROID_3.4.5/include/linux/vmalloc.h b/ANDROID_3.4.5/include/linux/vmalloc.h
deleted file mode 100644
index dcdfc2bd..00000000
--- a/ANDROID_3.4.5/include/linux/vmalloc.h
+++ /dev/null
@@ -1,160 +0,0 @@
-#ifndef _LINUX_VMALLOC_H
-#define _LINUX_VMALLOC_H
-
-#include <linux/spinlock.h>
-#include <linux/init.h>
-#include <asm/page.h>		/* pgprot_t */
-
-struct vm_area_struct;		/* vma defining user mapping in mm_types.h */
-
-/* bits in flags of vmalloc's vm_struct below */
-#define VM_IOREMAP	0x00000001	/* ioremap() and friends */
-#define VM_ALLOC	0x00000002	/* vmalloc() */
-#define VM_MAP		0x00000004	/* vmap()ed pages */
-#define VM_USERMAP	0x00000008	/* suitable for remap_vmalloc_range */
-#define VM_VPAGES	0x00000010	/* buffer for pages was vmalloc'ed */
-#define VM_UNLIST	0x00000020	/* vm_struct is not listed in vmlist */
-/* bits [20..32] reserved for arch specific ioremap internals */
-
-/*
- * Maximum alignment for ioremap() regions.
- * Can be overriden by arch-specific value.
- */
-#ifndef IOREMAP_MAX_ORDER
-#define IOREMAP_MAX_ORDER	(7 + PAGE_SHIFT)	/* 128 pages */
-#endif
-
-struct vm_struct {
-	struct vm_struct	*next;
-	void			*addr;
-	unsigned long		size;
-	unsigned long		flags;
-	struct page		**pages;
-	unsigned int		nr_pages;
-	phys_addr_t		phys_addr;
-	void			*caller;
-};
-
-/*
- *	Highlevel APIs for driver use
- */
-extern void vm_unmap_ram(const void *mem, unsigned int count);
-extern void *vm_map_ram(struct page **pages, unsigned int count,
-				int node, pgprot_t prot);
-extern void vm_unmap_aliases(void);
-
-#ifdef CONFIG_MMU
-extern void __init vmalloc_init(void);
-#else
-static inline void vmalloc_init(void)
-{
-}
-#endif
-
-extern void *vmalloc(unsigned long size);
-extern void *vzalloc(unsigned long size);
-extern void *vmalloc_user(unsigned long size);
-extern void *vmalloc_node(unsigned long size, int node);
-extern void *vzalloc_node(unsigned long size, int node);
-extern void *vmalloc_exec(unsigned long size);
-extern void *vmalloc_32(unsigned long size);
-extern void *vmalloc_32_user(unsigned long size);
-extern void *__vmalloc(unsigned long size, gfp_t gfp_mask, pgprot_t prot);
-extern void *__vmalloc_node_range(unsigned long size, unsigned long align,
-			unsigned long start, unsigned long end, gfp_t gfp_mask,
-			pgprot_t prot, int node, void *caller);
-extern void vfree(const void *addr);
-
-extern void *vmap(struct page **pages, unsigned int count,
-			unsigned long flags, pgprot_t prot);
-extern void vunmap(const void *addr);
-
-extern int remap_vmalloc_range(struct vm_area_struct *vma, void *addr,
-							unsigned long pgoff);
-void vmalloc_sync_all(void);
- 
-/*
- *	Lowlevel-APIs (not for driver use!)
- */
-
-static inline size_t get_vm_area_size(const struct vm_struct *area)
-{
-	/* return actual size without guard page */
-	return area->size - PAGE_SIZE;
-}
-
-extern struct vm_struct *get_vm_area(unsigned long size, unsigned long flags);
-extern struct vm_struct *get_vm_area_caller(unsigned long size,
-					unsigned long flags, void *caller);
-extern struct vm_struct *__get_vm_area(unsigned long size, unsigned long flags,
-					unsigned long start, unsigned long end);
-extern struct vm_struct *__get_vm_area_caller(unsigned long size,
-					unsigned long flags,
-					unsigned long start, unsigned long end,
-					void *caller);
-extern struct vm_struct *remove_vm_area(const void *addr);
-
-extern int map_vm_area(struct vm_struct *area, pgprot_t prot,
-			struct page ***pages);
-#ifdef CONFIG_MMU
-extern int map_kernel_range_noflush(unsigned long start, unsigned long size,
-				    pgprot_t prot, struct page **pages);
-extern void unmap_kernel_range_noflush(unsigned long addr, unsigned long size);
-extern void unmap_kernel_range(unsigned long addr, unsigned long size);
-#else
-static inline int
-map_kernel_range_noflush(unsigned long start, unsigned long size,
-			pgprot_t prot, struct page **pages)
-{
-	return size >> PAGE_SHIFT;
-}
-static inline void
-unmap_kernel_range_noflush(unsigned long addr, unsigned long size)
-{
-}
-static inline void
-unmap_kernel_range(unsigned long addr, unsigned long size)
-{
-}
-#endif
-
-/* Allocate/destroy a 'vmalloc' VM area. */
-extern struct vm_struct *alloc_vm_area(size_t size, pte_t **ptes);
-extern void free_vm_area(struct vm_struct *area);
-
-/* for /dev/kmem */
-extern long vread(char *buf, char *addr, unsigned long count);
-extern long vwrite(char *buf, char *addr, unsigned long count);
-
-/*
- *	Internals.  Dont't use..
- */
-extern rwlock_t vmlist_lock;
-extern struct vm_struct *vmlist;
-extern __init void vm_area_add_early(struct vm_struct *vm);
-extern __init void vm_area_register_early(struct vm_struct *vm, size_t align);
-
-#ifdef CONFIG_SMP
-# ifdef CONFIG_MMU
-struct vm_struct **pcpu_get_vm_areas(const unsigned long *offsets,
-				     const size_t *sizes, int nr_vms,
-				     size_t align);
-
-void pcpu_free_vm_areas(struct vm_struct **vms, int nr_vms);
-# else
-static inline struct vm_struct **
-pcpu_get_vm_areas(const unsigned long *offsets,
-		const size_t *sizes, int nr_vms,
-		size_t align)
-{
-	return NULL;
-}
-
-static inline void
-pcpu_free_vm_areas(struct vm_struct **vms, int nr_vms)
-{
-}
-# endif
-#endif
-
-#endif /* _LINUX_VMALLOC_H */
diff --git a/ANDROID_3.4.5/include/linux/vmstat.h b/ANDROID_3.4.5/include/linux/vmstat.h
deleted file mode 100644
index 65efb92d..00000000
--- a/ANDROID_3.4.5/include/linux/vmstat.h
+++ /dev/null
@@ -1,263 +0,0 @@
-#ifndef _LINUX_VMSTAT_H
-#define _LINUX_VMSTAT_H
-
-#include <linux/types.h>
-#include <linux/percpu.h>
-#include <linux/mm.h>
-#include <linux/mmzone.h>
-#include <linux/vm_event_item.h>
-#include <linux/atomic.h>
-
-extern int sysctl_stat_interval;
-
-#ifdef CONFIG_VM_EVENT_COUNTERS
-/*
- * Light weight per cpu counter implementation.
- *
- * Counters should only be incremented and no critical kernel component
- * should rely on the counter values.
- *
- * Counters are handled completely inline. On many platforms the code
- * generated will simply be the increment of a global address.
- */
-
-struct vm_event_state {
-	unsigned long event[NR_VM_EVENT_ITEMS];
-};
-
-DECLARE_PER_CPU(struct vm_event_state, vm_event_states);
-
-static inline void __count_vm_event(enum vm_event_item item)
-{
-	__this_cpu_inc(vm_event_states.event[item]);
-}
-
-static inline void count_vm_event(enum vm_event_item item)
-{
-	this_cpu_inc(vm_event_states.event[item]);
-}
-
-static inline void __count_vm_events(enum vm_event_item item, long delta)
-{
-	__this_cpu_add(vm_event_states.event[item], delta);
-}
-
-static inline void count_vm_events(enum vm_event_item item, long delta)
-{
-	this_cpu_add(vm_event_states.event[item], delta);
-}
-
-extern void all_vm_events(unsigned long *);
-#ifdef CONFIG_HOTPLUG
-extern void vm_events_fold_cpu(int cpu);
-#else
-static inline void vm_events_fold_cpu(int cpu)
-{
-}
-#endif
-
-#else
-
-/* Disable counters */
-static inline void count_vm_event(enum vm_event_item item)
-{
-}
-static inline void count_vm_events(enum vm_event_item item, long delta)
-{
-}
-static inline void __count_vm_event(enum vm_event_item item)
-{
-}
-static inline void __count_vm_events(enum vm_event_item item, long delta)
-{
-}
-static inline void all_vm_events(unsigned long *ret)
-{
-}
-static inline void vm_events_fold_cpu(int cpu)
-{
-}
-
-#endif /* CONFIG_VM_EVENT_COUNTERS */
-
-#define __count_zone_vm_events(item, zone, delta) \
-		__count_vm_events(item##_NORMAL - ZONE_NORMAL + \
-		zone_idx(zone), delta)
-
-/*
- * Zone based page accounting with per cpu differentials.
- */
-extern atomic_long_t vm_stat[NR_VM_ZONE_STAT_ITEMS];
-
-static inline void zone_page_state_add(long x, struct zone *zone,
-				 enum zone_stat_item item)
-{
-	atomic_long_add(x, &zone->vm_stat[item]);
-	atomic_long_add(x, &vm_stat[item]);
-}
-
-static inline unsigned long global_page_state(enum zone_stat_item item)
-{
-	long x = atomic_long_read(&vm_stat[item]);
-#ifdef CONFIG_SMP
-	if (x < 0)
-		x = 0;
-#endif
-	return x;
-}
-
-static inline unsigned long zone_page_state(struct zone *zone,
-					enum zone_stat_item item)
-{
-	long x = atomic_long_read(&zone->vm_stat[item]);
-#ifdef CONFIG_SMP
-	if (x < 0)
-		x = 0;
-#endif
-	return x;
-}
-
-/*
- * More accurate version that also considers the currently pending
- * deltas. For that we need to loop over all cpus to find the current
- * deltas. There is no synchronization so the result cannot be
- * exactly accurate either.
- */
-static inline unsigned long zone_page_state_snapshot(struct zone *zone,
-					enum zone_stat_item item)
-{
-	long x = atomic_long_read(&zone->vm_stat[item]);
-
-#ifdef CONFIG_SMP
-	int cpu;
-	for_each_online_cpu(cpu)
-		x += per_cpu_ptr(zone->pageset, cpu)->vm_stat_diff[item];
-
-	if (x < 0)
-		x = 0;
-#endif
-	return x;
-}
-
-extern unsigned long global_reclaimable_pages(void);
-extern unsigned long zone_reclaimable_pages(struct zone *zone);
-
-#ifdef CONFIG_NUMA
-/*
- * Determine the per node value of a stat item. This function
- * is called frequently in a NUMA machine, so try to be as
- * frugal as possible.
- */
-static inline unsigned long node_page_state(int node,
-				 enum zone_stat_item item)
-{
-	struct zone *zones = NODE_DATA(node)->node_zones;
-
-	return
-#ifdef CONFIG_ZONE_DMA
-		zone_page_state(&zones[ZONE_DMA], item) +
-#endif
-#ifdef CONFIG_ZONE_DMA32
-		zone_page_state(&zones[ZONE_DMA32], item) +
-#endif
-#ifdef CONFIG_HIGHMEM
-		zone_page_state(&zones[ZONE_HIGHMEM], item) +
-#endif
-		zone_page_state(&zones[ZONE_NORMAL], item) +
-		zone_page_state(&zones[ZONE_MOVABLE], item);
-}
-
-extern void zone_statistics(struct zone *, struct zone *, gfp_t gfp);
-
-#else
-
-#define node_page_state(node, item) global_page_state(item)
-#define zone_statistics(_zl, _z, gfp) do { } while (0)
-
-#endif /* CONFIG_NUMA */
-
-#define add_zone_page_state(__z, __i, __d) mod_zone_page_state(__z, __i, __d)
-#define sub_zone_page_state(__z, __i, __d) mod_zone_page_state(__z, __i, -(__d))
-
-static inline void zap_zone_vm_stats(struct zone *zone)
-{
-	memset(zone->vm_stat, 0, sizeof(zone->vm_stat));
-}
-
-extern void inc_zone_state(struct zone *, enum zone_stat_item);
-
-#ifdef CONFIG_SMP
-void __mod_zone_page_state(struct zone *, enum zone_stat_item item, int);
-void __inc_zone_page_state(struct page *, enum zone_stat_item);
-void __dec_zone_page_state(struct page *, enum zone_stat_item);
-
-void mod_zone_page_state(struct zone *, enum zone_stat_item, int);
-void inc_zone_page_state(struct page *, enum zone_stat_item);
-void dec_zone_page_state(struct page *, enum zone_stat_item);
-
-extern void inc_zone_state(struct zone *, enum zone_stat_item);
-extern void __inc_zone_state(struct zone *, enum zone_stat_item);
-extern void dec_zone_state(struct zone *, enum zone_stat_item);
-extern void __dec_zone_state(struct zone *, enum zone_stat_item);
-
-void refresh_cpu_vm_stats(int);
-void refresh_zone_stat_thresholds(void);
-
-int calculate_pressure_threshold(struct zone *zone);
-int calculate_normal_threshold(struct zone *zone);
-void set_pgdat_percpu_threshold(pg_data_t *pgdat,
-				int (*calculate_pressure)(struct zone *));
-#else /* CONFIG_SMP */
-
-/*
- * We do not maintain differentials in a single processor configuration.
- * The functions directly modify the zone and global counters.
- */
-static inline void __mod_zone_page_state(struct zone *zone,
-			enum zone_stat_item item, int delta)
-{
-	zone_page_state_add(delta, zone, item);
-}
-
-static inline void __inc_zone_state(struct zone *zone, enum zone_stat_item item)
-{
-	atomic_long_inc(&zone->vm_stat[item]);
-	atomic_long_inc(&vm_stat[item]);
-}
-
-static inline void __inc_zone_page_state(struct page *page,
-			enum zone_stat_item item)
-{
-	__inc_zone_state(page_zone(page), item);
-}
-
-static inline void __dec_zone_state(struct zone *zone, enum zone_stat_item item)
-{
-	atomic_long_dec(&zone->vm_stat[item]);
-	atomic_long_dec(&vm_stat[item]);
-}
-
-static inline void __dec_zone_page_state(struct page *page,
-			enum zone_stat_item item)
-{
-	__dec_zone_state(page_zone(page), item);
-}
-
-/*
- * We only use atomic operations to update counters. So there is no need to
- * disable interrupts.
- */
-#define inc_zone_page_state __inc_zone_page_state
-#define dec_zone_page_state __dec_zone_page_state
-#define mod_zone_page_state __mod_zone_page_state
-
-#define set_pgdat_percpu_threshold(pgdat, callback) { }
-
-static inline void refresh_cpu_vm_stats(int cpu) { }
-static inline void refresh_zone_stat_thresholds(void) { }
-
-#endif		/* CONFIG_SMP */
-
-extern const char * const vmstat_text[];
-
-#endif /* _LINUX_VMSTAT_H */
diff --git a/ANDROID_3.4.5/include/linux/vt.h b/ANDROID_3.4.5/include/linux/vt.h
deleted file mode 100644
index 30a8dd9c..00000000
--- a/ANDROID_3.4.5/include/linux/vt.h
+++ /dev/null
@@ -1,113 +0,0 @@
-#ifndef _LINUX_VT_H
-#define _LINUX_VT_H
-
-
-/*
- * These constants are also useful for user-level apps (e.g., VC
- * resizing).
- */
-#define MIN_NR_CONSOLES 1       /* must be at least 1 */
-#define MAX_NR_CONSOLES	63	/* serial lines start at 64 */
-#define MAX_NR_USER_CONSOLES 63	/* must be root to allocate above this */
-		/* Note: the ioctl VT_GETSTATE does not work for
-		   consoles 16 and higher (since it returns a short) */
-
-/* 0x56 is 'V', to avoid collision with termios and kd */
-
-#define VT_OPENQRY	0x5600	/* find available vt */
-
-struct vt_mode {
-	char mode;		/* vt mode */
-	char waitv;		/* if set, hang on writes if not active */
-	short relsig;		/* signal to raise on release req */
-	short acqsig;		/* signal to raise on acquisition */
-	short frsig;		/* unused (set to 0) */
-};
-#define VT_GETMODE	0x5601	/* get mode of active vt */
-#define VT_SETMODE	0x5602	/* set mode of active vt */
-#define		VT_AUTO		0x00	/* auto vt switching */
-#define		VT_PROCESS	0x01	/* process controls switching */
-#define		VT_ACKACQ	0x02	/* acknowledge switch */
-
-struct vt_stat {
-	unsigned short v_active;	/* active vt */
-	unsigned short v_signal;	/* signal to send */
-	unsigned short v_state;		/* vt bitmask */
-};
-#define VT_GETSTATE	0x5603	/* get global vt state info */
-#define VT_SENDSIG	0x5604	/* signal to send to bitmask of vts */
-
-#define VT_RELDISP	0x5605	/* release display */
-
-#define VT_ACTIVATE	0x5606	/* make vt active */
-#define VT_WAITACTIVE	0x5607	/* wait for vt active */
-#define VT_DISALLOCATE	0x5608  /* free memory associated to vt */
-
-struct vt_sizes {
-	unsigned short v_rows;		/* number of rows */
-	unsigned short v_cols;		/* number of columns */
-	unsigned short v_scrollsize;	/* number of lines of scrollback */
-};
-#define VT_RESIZE	0x5609	/* set kernel's idea of screensize */
-
-struct vt_consize {
-	unsigned short v_rows;	/* number of rows */
-	unsigned short v_cols;	/* number of columns */
-	unsigned short v_vlin;	/* number of pixel rows on screen */
-	unsigned short v_clin;	/* number of pixel rows per character */
-	unsigned short v_vcol;	/* number of pixel columns on screen */
-	unsigned short v_ccol;	/* number of pixel columns per character */
-};
-#define VT_RESIZEX      0x560A  /* set kernel's idea of screensize + more */
-#define VT_LOCKSWITCH   0x560B  /* disallow vt switching */
-#define VT_UNLOCKSWITCH 0x560C  /* allow vt switching */
-#define VT_GETHIFONTMASK 0x560D  /* return hi font mask */
-
-struct vt_event {
-	unsigned int event;
-#define VT_EVENT_SWITCH		0x0001	/* Console switch */
-#define VT_EVENT_BLANK		0x0002	/* Screen blank */
-#define VT_EVENT_UNBLANK	0x0004	/* Screen unblank */
-#define VT_EVENT_RESIZE		0x0008	/* Resize display */
-#define VT_MAX_EVENT		0x000F
-	unsigned int oldev;		/* Old console */
-	unsigned int newev;		/* New console (if changing) */
-	unsigned int pad[4];		/* Padding for expansion */
-};
-
-#define VT_WAITEVENT	0x560E	/* Wait for an event */
-
-struct vt_setactivate {
-	unsigned int console;
-	struct vt_mode mode;
-};
-
-#define VT_SETACTIVATE	0x560F	/* Activate and set the mode of a console */
-
-#ifdef __KERNEL__
-
-/* Virtual Terminal events. */
-#define VT_ALLOCATE		0x0001 /* Console got allocated */
-#define VT_DEALLOCATE		0x0002 /* Console will be deallocated */
-#define VT_WRITE		0x0003 /* A char got output */
-#define VT_UPDATE		0x0004 /* A bigger update occurred */
-#define VT_PREWRITE		0x0005 /* A char is about to be written to the console */
-
-#ifdef CONFIG_VT_CONSOLE
-
-extern int vt_kmsg_redirect(int new);
-
-#else
-
-static inline int vt_kmsg_redirect(int new)
-{
-	return 0;
-}
-
-#endif
-
-#endif /* __KERNEL__ */
-
-#define vt_get_kmsg_redirect() vt_kmsg_redirect(-1)
-
-#endif /* _LINUX_VT_H */
diff --git a/ANDROID_3.4.5/include/linux/vt_buffer.h b/ANDROID_3.4.5/include/linux/vt_buffer.h
deleted file mode 100644
index 057db7d2..00000000
--- a/ANDROID_3.4.5/include/linux/vt_buffer.h
+++ /dev/null
@@ -1,63 +0,0 @@
-/*
- *	include/linux/vt_buffer.h -- Access to VT screen buffer
- *
- *	(c) 1998 Martin Mares <mj@ucw.cz>
- *
- *	This is a set of macros and functions which are used in the
- *	console driver and related code to access the screen buffer.
- *	In most cases the console works with simple in-memory buffer,
- *	but when handling hardware text mode consoles, we store
- *	the foreground console directly in video memory.
- */
-
-#ifndef _LINUX_VT_BUFFER_H_
-#define _LINUX_VT_BUFFER_H_
-
-
-#if defined(CONFIG_VGA_CONSOLE) || defined(CONFIG_MDA_CONSOLE)
-#include <asm/vga.h>
-#endif
-
-#ifndef VT_BUF_HAVE_RW
-#define scr_writew(val, addr) (*(addr) = (val))
-#define scr_readw(addr) (*(addr))
-#define scr_memcpyw(d, s, c) memcpy(d, s, c)
-#define scr_memmovew(d, s, c) memmove(d, s, c)
-#define VT_BUF_HAVE_MEMCPYW
-#define VT_BUF_HAVE_MEMMOVEW
-#endif
-
-#ifndef VT_BUF_HAVE_MEMSETW
-static inline void scr_memsetw(u16 *s, u16 c, unsigned int count)
-{
-	count /= 2;
-	while (count--)
-		scr_writew(c, s++);
-}
-#endif
-
-#ifndef VT_BUF_HAVE_MEMCPYW
-static inline void scr_memcpyw(u16 *d, const u16 *s, unsigned int count)
-{
-	count /= 2;
-	while (count--)
-		scr_writew(scr_readw(s++), d++);
-}
-#endif
-
-#ifndef VT_BUF_HAVE_MEMMOVEW
-static inline void scr_memmovew(u16 *d, const u16 *s, unsigned int count)
-{
-	if (d < s)
-		scr_memcpyw(d, s, count);
-	else {
-		count /= 2;
-		d += count;
-		s += count;
-		while (count--)
-			scr_writew(scr_readw(--s), --d);
-	}
-}
-#endif
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/vt_kern.h b/ANDROID_3.4.5/include/linux/vt_kern.h
deleted file mode 100644
index e33d77f1..00000000
--- a/ANDROID_3.4.5/include/linux/vt_kern.h
+++ /dev/null
@@ -1,196 +0,0 @@
-#ifndef _VT_KERN_H
-#define _VT_KERN_H
-
-/*
- * this really is an extension of the vc_cons structure in console.c, but
- * with information needed by the vt package
- */
-
-#include <linux/vt.h>
-#include <linux/kd.h>
-#include <linux/tty.h>
-#include <linux/mutex.h>
-#include <linux/console_struct.h>
-#include <linux/mm.h>
-#include <linux/consolemap.h>
-#include <linux/notifier.h>
-
-/*
- * Presently, a lot of graphics programs do not restore the contents of
- * the higher font pages.  Defining this flag will avoid use of them, but
- * will lose support for PIO_FONTRESET.  Note that many font operations are
- * not likely to work with these programs anyway; they need to be
- * fixed.  The linux/Documentation directory includes a code snippet
- * to save and restore the text font.
- */
-#ifdef CONFIG_VGA_CONSOLE
-#define BROKEN_GRAPHICS_PROGRAMS 1
-#endif
-
-extern void kd_mksound(unsigned int hz, unsigned int ticks);
-extern int kbd_rate(struct kbd_repeat *rep);
-extern int fg_console, last_console, want_console;
-
-/* console.c */
-
-int vc_allocate(unsigned int console);
-int vc_cons_allocated(unsigned int console);
-int vc_resize(struct vc_data *vc, unsigned int cols, unsigned int lines);
-void vc_deallocate(unsigned int console);
-void reset_palette(struct vc_data *vc);
-void do_blank_screen(int entering_gfx);
-void do_unblank_screen(int leaving_gfx);
-void unblank_screen(void);
-void poke_blanked_console(void);
-int con_font_op(struct vc_data *vc, struct console_font_op *op);
-int con_set_cmap(unsigned char __user *cmap);
-int con_get_cmap(unsigned char __user *cmap);
-void scrollback(struct vc_data *vc, int lines);
-void scrollfront(struct vc_data *vc, int lines);
-void update_region(struct vc_data *vc, unsigned long start, int count);
-void redraw_screen(struct vc_data *vc, int is_switch);
-#define update_screen(x) redraw_screen(x, 0)
-#define switch_screen(x) redraw_screen(x, 1)
-
-struct tty_struct;
-int tioclinux(struct tty_struct *tty, unsigned long arg);
-
-#ifdef CONFIG_CONSOLE_TRANSLATIONS
-/* consolemap.c */
-
-struct unimapinit;
-struct unipair;
-
-int con_set_trans_old(unsigned char __user * table);
-int con_get_trans_old(unsigned char __user * table);
-int con_set_trans_new(unsigned short __user * table);
-int con_get_trans_new(unsigned short __user * table);
-int con_clear_unimap(struct vc_data *vc, struct unimapinit *ui);
-int con_set_unimap(struct vc_data *vc, ushort ct, struct unipair __user *list);
-int con_get_unimap(struct vc_data *vc, ushort ct, ushort __user *uct, struct unipair __user *list);
-int con_set_default_unimap(struct vc_data *vc);
-void con_free_unimap(struct vc_data *vc);
-void con_protect_unimap(struct vc_data *vc, int rdonly);
-int con_copy_unimap(struct vc_data *dst_vc, struct vc_data *src_vc);
-
-#define vc_translate(vc, c) ((vc)->vc_translate[(c) |			\
-					((vc)->vc_toggle_meta ? 0x80 : 0)])
-#else
-static inline int con_set_trans_old(unsigned char __user *table)
-{
-	return 0;
-}
-static inline int con_get_trans_old(unsigned char __user *table)
-{
-	return -EINVAL;
-}
-static inline int con_set_trans_new(unsigned short __user *table)
-{
-	return 0;
-}
-static inline int con_get_trans_new(unsigned short __user *table)
-{
-	return -EINVAL;
-}
-static inline int con_clear_unimap(struct vc_data *vc, struct unimapinit *ui)
-{
-	return 0;
-}
-static inline
-int con_set_unimap(struct vc_data *vc, ushort ct, struct unipair __user *list)
-{
-	return 0;
-}
-static inline
-int con_get_unimap(struct vc_data *vc, ushort ct, ushort __user *uct,
-		   struct unipair __user *list)
-{
-	return -EINVAL;
-}
-static inline int con_set_default_unimap(struct vc_data *vc)
-{
-	return 0;
-}
-static inline void con_free_unimap(struct vc_data *vc)
-{
-}
-static inline void con_protect_unimap(struct vc_data *vc, int rdonly)
-{
-}
-static inline
-int con_copy_unimap(struct vc_data *dst_vc, struct vc_data *src_vc)
-{
-	return 0;
-}
-
-#define vc_translate(vc, c) (c)
-#endif
-
-/* vt.c */
-void vt_event_post(unsigned int event, unsigned int old, unsigned int new);
-int vt_waitactive(int n);
-void change_console(struct vc_data *new_vc);
-void reset_vc(struct vc_data *vc);
-extern int unbind_con_driver(const struct consw *csw, int first, int last,
-			     int deflt);
-int vty_init(const struct file_operations *console_fops);
-
-static inline bool vt_force_oops_output(struct vc_data *vc)
-{
-	if (oops_in_progress && vc->vc_panic_force_write  && panic_timeout >= 0)
-		return true;
-	return false;
-}
-
-extern char vt_dont_switch;
-extern int default_utf8;
-extern int global_cursor_default;
-
-struct vt_spawn_console {
-	spinlock_t lock;
-	struct pid *pid;
-	int sig;
-};
-extern struct vt_spawn_console vt_spawn_con;
-
-extern int vt_move_to_console(unsigned int vt, int alloc);
-
-/* Interfaces for VC notification of character events (for accessibility etc) */
-
-struct vt_notifier_param {
-	struct vc_data *vc;	/* VC on which the update happened */
-	unsigned int c;		/* Printed char */
-};
-
-extern int register_vt_notifier(struct notifier_block *nb);
-extern int unregister_vt_notifier(struct notifier_block *nb);
-
-extern void hide_boot_cursor(bool hide);
-
-/* keyboard  provided interfaces */
-extern int vt_do_diacrit(unsigned int cmd, void __user *up, int eperm);
-extern int vt_do_kdskbmode(int console, unsigned int arg);
-extern int vt_do_kdskbmeta(int console, unsigned int arg);
-extern int vt_do_kbkeycode_ioctl(int cmd, struct kbkeycode __user *user_kbkc,
-								int perm);
-extern int vt_do_kdsk_ioctl(int cmd, struct kbentry __user *user_kbe,
-					int perm, int console);
-extern int vt_do_kdgkb_ioctl(int cmd, struct kbsentry __user *user_kdgkb,
-                                        int perm);
-extern int vt_do_kdskled(int console, int cmd, unsigned long arg, int perm);
-extern int vt_do_kdgkbmode(int console);
-extern int vt_do_kdgkbmeta(int console);
-extern void vt_reset_unicode(int console);
-extern int vt_get_shift_state(void);
-extern void vt_reset_keyboard(int console);
-extern int vt_get_leds(int console, int flag);
-extern int vt_get_kbd_mode_bit(int console, int bit);
-extern void vt_set_kbd_mode_bit(int console, int bit);
-extern void vt_clr_kbd_mode_bit(int console, int bit);
-extern void vt_set_led_state(int console, int leds);
-extern void vt_set_led_state(int console, int leds);
-extern void vt_kbd_con_start(int console);
-extern void vt_kbd_con_stop(int console);
-
-
-#endif /* _VT_KERN_H */
diff --git a/ANDROID_3.4.5/include/linux/w1-gpio.h b/ANDROID_3.4.5/include/linux/w1-gpio.h
deleted file mode 100644
index 3adeff82..00000000
--- a/ANDROID_3.4.5/include/linux/w1-gpio.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * w1-gpio interface to platform code
- *
- * Copyright (C) 2007 Ville Syrjala <syrjala@sci.fi>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.
- */
-#ifndef _LINUX_W1_GPIO_H
-#define _LINUX_W1_GPIO_H
-
-/**
- * struct w1_gpio_platform_data - Platform-dependent data for w1-gpio
- * @pin: GPIO pin to use
- * @is_open_drain: GPIO pin is configured as open drain
- */
-struct w1_gpio_platform_data {
-	unsigned int pin;
-	unsigned int is_open_drain:1;
-	void (*enable_external_pullup)(int enable);
-};
-
-#endif /* _LINUX_W1_GPIO_H */
diff --git a/ANDROID_3.4.5/include/linux/wait.h b/ANDROID_3.4.5/include/linux/wait.h
deleted file mode 100644
index 1dee81c4..00000000
--- a/ANDROID_3.4.5/include/linux/wait.h
+++ /dev/null
@@ -1,668 +0,0 @@
-#ifndef _LINUX_WAIT_H
-#define _LINUX_WAIT_H
-
-#define WNOHANG		0x00000001
-#define WUNTRACED	0x00000002
-#define WSTOPPED	WUNTRACED
-#define WEXITED		0x00000004
-#define WCONTINUED	0x00000008
-#define WNOWAIT		0x01000000	/* Don't reap, just poll status.  */
-
-#define __WNOTHREAD	0x20000000	/* Don't wait on children of other threads in this group */
-#define __WALL		0x40000000	/* Wait on all children, regardless of type */
-#define __WCLONE	0x80000000	/* Wait only on non-SIGCHLD children */
-
-/* First argument to waitid: */
-#define P_ALL		0
-#define P_PID		1
-#define P_PGID		2
-
-#ifdef __KERNEL__
-
-#include <linux/list.h>
-#include <linux/stddef.h>
-#include <linux/spinlock.h>
-#include <asm/current.h>
-
-typedef struct __wait_queue wait_queue_t;
-typedef int (*wait_queue_func_t)(wait_queue_t *wait, unsigned mode, int flags, void *key);
-int default_wake_function(wait_queue_t *wait, unsigned mode, int flags, void *key);
-
-struct __wait_queue {
-	unsigned int flags;
-#define WQ_FLAG_EXCLUSIVE	0x01
-	void *private;
-	wait_queue_func_t func;
-	struct list_head task_list;
-};
-
-struct wait_bit_key {
-	void *flags;
-	int bit_nr;
-};
-
-struct wait_bit_queue {
-	struct wait_bit_key key;
-	wait_queue_t wait;
-};
-
-struct __wait_queue_head {
-	spinlock_t lock;
-	struct list_head task_list;
-};
-typedef struct __wait_queue_head wait_queue_head_t;
-
-struct task_struct;
-
-/*
- * Macros for declaration and initialisaton of the datatypes
- */
-
-#define __WAITQUEUE_INITIALIZER(name, tsk) {				\
-	.private	= tsk,						\
-	.func		= default_wake_function,			\
-	.task_list	= { NULL, NULL } }
-
-#define DECLARE_WAITQUEUE(name, tsk)					\
-	wait_queue_t name = __WAITQUEUE_INITIALIZER(name, tsk)
-
-#define __WAIT_QUEUE_HEAD_INITIALIZER(name) {				\
-	.lock		= __SPIN_LOCK_UNLOCKED(name.lock),		\
-	.task_list	= { &(name).task_list, &(name).task_list } }
-
-#define DECLARE_WAIT_QUEUE_HEAD(name) \
-	wait_queue_head_t name = __WAIT_QUEUE_HEAD_INITIALIZER(name)
-
-#define __WAIT_BIT_KEY_INITIALIZER(word, bit)				\
-	{ .flags = word, .bit_nr = bit, }
-
-extern void __init_waitqueue_head(wait_queue_head_t *q, const char *name, struct lock_class_key *);
-
-#define init_waitqueue_head(q)				\
-	do {						\
-		static struct lock_class_key __key;	\
-							\
-		__init_waitqueue_head((q), #q, &__key);	\
-	} while (0)
-
-#ifdef CONFIG_LOCKDEP
-# define __WAIT_QUEUE_HEAD_INIT_ONSTACK(name) \
-	({ init_waitqueue_head(&name); name; })
-# define DECLARE_WAIT_QUEUE_HEAD_ONSTACK(name) \
-	wait_queue_head_t name = __WAIT_QUEUE_HEAD_INIT_ONSTACK(name)
-#else
-# define DECLARE_WAIT_QUEUE_HEAD_ONSTACK(name) DECLARE_WAIT_QUEUE_HEAD(name)
-#endif
-
-static inline void init_waitqueue_entry(wait_queue_t *q, struct task_struct *p)
-{
-	q->flags = 0;
-	q->private = p;
-	q->func = default_wake_function;
-}
-
-static inline void init_waitqueue_func_entry(wait_queue_t *q,
-					wait_queue_func_t func)
-{
-	q->flags = 0;
-	q->private = NULL;
-	q->func = func;
-}
-
-static inline int waitqueue_active(wait_queue_head_t *q)
-{
-	return !list_empty(&q->task_list);
-}
-
-extern void add_wait_queue(wait_queue_head_t *q, wait_queue_t *wait);
-extern void add_wait_queue_exclusive(wait_queue_head_t *q, wait_queue_t *wait);
-extern void remove_wait_queue(wait_queue_head_t *q, wait_queue_t *wait);
-
-static inline void __add_wait_queue(wait_queue_head_t *head, wait_queue_t *new)
-{
-	list_add(&new->task_list, &head->task_list);
-}
-
-/*
- * Used for wake-one threads:
- */
-static inline void __add_wait_queue_exclusive(wait_queue_head_t *q,
-					      wait_queue_t *wait)
-{
-	wait->flags |= WQ_FLAG_EXCLUSIVE;
-	__add_wait_queue(q, wait);
-}
-
-static inline void __add_wait_queue_tail(wait_queue_head_t *head,
-					 wait_queue_t *new)
-{
-	list_add_tail(&new->task_list, &head->task_list);
-}
-
-static inline void __add_wait_queue_tail_exclusive(wait_queue_head_t *q,
-					      wait_queue_t *wait)
-{
-	wait->flags |= WQ_FLAG_EXCLUSIVE;
-	__add_wait_queue_tail(q, wait);
-}
-
-static inline void __remove_wait_queue(wait_queue_head_t *head,
-							wait_queue_t *old)
-{
-	list_del(&old->task_list);
-}
-
-void __wake_up(wait_queue_head_t *q, unsigned int mode, int nr, void *key);
-void __wake_up_locked_key(wait_queue_head_t *q, unsigned int mode, void *key);
-void __wake_up_sync_key(wait_queue_head_t *q, unsigned int mode, int nr,
-			void *key);
-void __wake_up_locked(wait_queue_head_t *q, unsigned int mode, int nr);
-void __wake_up_sync(wait_queue_head_t *q, unsigned int mode, int nr);
-void __wake_up_bit(wait_queue_head_t *, void *, int);
-int __wait_on_bit(wait_queue_head_t *, struct wait_bit_queue *, int (*)(void *), unsigned);
-int __wait_on_bit_lock(wait_queue_head_t *, struct wait_bit_queue *, int (*)(void *), unsigned);
-void wake_up_bit(void *, int);
-int out_of_line_wait_on_bit(void *, int, int (*)(void *), unsigned);
-int out_of_line_wait_on_bit_lock(void *, int, int (*)(void *), unsigned);
-wait_queue_head_t *bit_waitqueue(void *, int);
-
-#define wake_up(x)			__wake_up(x, TASK_NORMAL, 1, NULL)
-#define wake_up_nr(x, nr)		__wake_up(x, TASK_NORMAL, nr, NULL)
-#define wake_up_all(x)			__wake_up(x, TASK_NORMAL, 0, NULL)
-#define wake_up_locked(x)		__wake_up_locked((x), TASK_NORMAL, 1)
-#define wake_up_all_locked(x)		__wake_up_locked((x), TASK_NORMAL, 0)
-
-#define wake_up_interruptible(x)	__wake_up(x, TASK_INTERRUPTIBLE, 1, NULL)
-#define wake_up_interruptible_nr(x, nr)	__wake_up(x, TASK_INTERRUPTIBLE, nr, NULL)
-#define wake_up_interruptible_all(x)	__wake_up(x, TASK_INTERRUPTIBLE, 0, NULL)
-#define wake_up_interruptible_sync(x)	__wake_up_sync((x), TASK_INTERRUPTIBLE, 1)
-
-/*
- * Wakeup macros to be used to report events to the targets.
- */
-#define wake_up_poll(x, m)				\
-	__wake_up(x, TASK_NORMAL, 1, (void *) (m))
-#define wake_up_locked_poll(x, m)				\
-	__wake_up_locked_key((x), TASK_NORMAL, (void *) (m))
-#define wake_up_interruptible_poll(x, m)			\
-	__wake_up(x, TASK_INTERRUPTIBLE, 1, (void *) (m))
-#define wake_up_interruptible_sync_poll(x, m)				\
-	__wake_up_sync_key((x), TASK_INTERRUPTIBLE, 1, (void *) (m))
-
-#define __wait_event(wq, condition) 					\
-do {									\
-	DEFINE_WAIT(__wait);						\
-									\
-	for (;;) {							\
-		prepare_to_wait(&wq, &__wait, TASK_UNINTERRUPTIBLE);	\
-		if (condition)						\
-			break;						\
-		schedule();						\
-	}								\
-	finish_wait(&wq, &__wait);					\
-} while (0)
-
-/**
- * wait_event - sleep until a condition gets true
- * @wq: the waitqueue to wait on
- * @condition: a C expression for the event to wait for
- *
- * The process is put to sleep (TASK_UNINTERRUPTIBLE) until the
- * @condition evaluates to true. The @condition is checked each time
- * the waitqueue @wq is woken up.
- *
- * wake_up() has to be called after changing any variable that could
- * change the result of the wait condition.
- */
-#define wait_event(wq, condition) 					\
-do {									\
-	if (condition)	 						\
-		break;							\
-	__wait_event(wq, condition);					\
-} while (0)
-
-#define __wait_event_timeout(wq, condition, ret)			\
-do {									\
-	DEFINE_WAIT(__wait);						\
-									\
-	for (;;) {							\
-		prepare_to_wait(&wq, &__wait, TASK_UNINTERRUPTIBLE);	\
-		if (condition)						\
-			break;						\
-		ret = schedule_timeout(ret);				\
-		if (!ret)						\
-			break;						\
-	}								\
-	finish_wait(&wq, &__wait);					\
-} while (0)
-
-/**
- * wait_event_timeout - sleep until a condition gets true or a timeout elapses
- * @wq: the waitqueue to wait on
- * @condition: a C expression for the event to wait for
- * @timeout: timeout, in jiffies
- *
- * The process is put to sleep (TASK_UNINTERRUPTIBLE) until the
- * @condition evaluates to true. The @condition is checked each time
- * the waitqueue @wq is woken up.
- *
- * wake_up() has to be called after changing any variable that could
- * change the result of the wait condition.
- *
- * The function returns 0 if the @timeout elapsed, and the remaining
- * jiffies if the condition evaluated to true before the timeout elapsed.
- */
-#define wait_event_timeout(wq, condition, timeout)			\
-({									\
-	long __ret = timeout;						\
-	if (!(condition)) 						\
-		__wait_event_timeout(wq, condition, __ret);		\
-	__ret;								\
-})
-
-#define __wait_event_interruptible(wq, condition, ret)			\
-do {									\
-	DEFINE_WAIT(__wait);						\
-									\
-	for (;;) {							\
-		prepare_to_wait(&wq, &__wait, TASK_INTERRUPTIBLE);	\
-		if (condition)						\
-			break;						\
-		if (!signal_pending(current)) {				\
-			schedule();					\
-			continue;					\
-		}							\
-		ret = -ERESTARTSYS;					\
-		break;							\
-	}								\
-	finish_wait(&wq, &__wait);					\
-} while (0)
-
-/**
- * wait_event_interruptible - sleep until a condition gets true
- * @wq: the waitqueue to wait on
- * @condition: a C expression for the event to wait for
- *
- * The process is put to sleep (TASK_INTERRUPTIBLE) until the
- * @condition evaluates to true or a signal is received.
- * The @condition is checked each time the waitqueue @wq is woken up.
- *
- * wake_up() has to be called after changing any variable that could
- * change the result of the wait condition.
- *
- * The function will return -ERESTARTSYS if it was interrupted by a
- * signal and 0 if @condition evaluated to true.
- */
-#define wait_event_interruptible(wq, condition)				\
-({									\
-	int __ret = 0;							\
-	if (!(condition))						\
-		__wait_event_interruptible(wq, condition, __ret);	\
-	__ret;								\
-})
-
-#define __wait_event_interruptible_timeout(wq, condition, ret)		\
-do {									\
-	DEFINE_WAIT(__wait);						\
-									\
-	for (;;) {							\
-		prepare_to_wait(&wq, &__wait, TASK_INTERRUPTIBLE);	\
-		if (condition)						\
-			break;						\
-		if (!signal_pending(current)) {				\
-			ret = schedule_timeout(ret);			\
-			if (!ret)					\
-				break;					\
-			continue;					\
-		}							\
-		ret = -ERESTARTSYS;					\
-		break;							\
-	}								\
-	finish_wait(&wq, &__wait);					\
-} while (0)
-
-/**
- * wait_event_interruptible_timeout - sleep until a condition gets true or a timeout elapses
- * @wq: the waitqueue to wait on
- * @condition: a C expression for the event to wait for
- * @timeout: timeout, in jiffies
- *
- * The process is put to sleep (TASK_INTERRUPTIBLE) until the
- * @condition evaluates to true or a signal is received.
- * The @condition is checked each time the waitqueue @wq is woken up.
- *
- * wake_up() has to be called after changing any variable that could
- * change the result of the wait condition.
- *
- * The function returns 0 if the @timeout elapsed, -ERESTARTSYS if it
- * was interrupted by a signal, and the remaining jiffies otherwise
- * if the condition evaluated to true before the timeout elapsed.
- */
-#define wait_event_interruptible_timeout(wq, condition, timeout)	\
-({									\
-	long __ret = timeout;						\
-	if (!(condition))						\
-		__wait_event_interruptible_timeout(wq, condition, __ret); \
-	__ret;								\
-})
-
-#define __wait_event_interruptible_exclusive(wq, condition, ret)	\
-do {									\
-	DEFINE_WAIT(__wait);						\
-									\
-	for (;;) {							\
-		prepare_to_wait_exclusive(&wq, &__wait,			\
-					TASK_INTERRUPTIBLE);		\
-		if (condition) {					\
-			finish_wait(&wq, &__wait);			\
-			break;						\
-		}							\
-		if (!signal_pending(current)) {				\
-			schedule();					\
-			continue;					\
-		}							\
-		ret = -ERESTARTSYS;					\
-		abort_exclusive_wait(&wq, &__wait, 			\
-				TASK_INTERRUPTIBLE, NULL);		\
-		break;							\
-	}								\
-} while (0)
-
-#define wait_event_interruptible_exclusive(wq, condition)		\
-({									\
-	int __ret = 0;							\
-	if (!(condition))						\
-		__wait_event_interruptible_exclusive(wq, condition, __ret);\
-	__ret;								\
-})
-
-
-#define __wait_event_interruptible_locked(wq, condition, exclusive, irq) \
-({									\
-	int __ret = 0;							\
-	DEFINE_WAIT(__wait);						\
-	if (exclusive)							\
-		__wait.flags |= WQ_FLAG_EXCLUSIVE;			\
-	do {								\
-		if (likely(list_empty(&__wait.task_list)))		\
-			__add_wait_queue_tail(&(wq), &__wait);		\
-		set_current_state(TASK_INTERRUPTIBLE);			\
-		if (signal_pending(current)) {				\
-			__ret = -ERESTARTSYS;				\
-			break;						\
-		}							\
-		if (irq)						\
-			spin_unlock_irq(&(wq).lock);			\
-		else							\
-			spin_unlock(&(wq).lock);			\
-		schedule();						\
-		if (irq)						\
-			spin_lock_irq(&(wq).lock);			\
-		else							\
-			spin_lock(&(wq).lock);				\
-	} while (!(condition));						\
-	__remove_wait_queue(&(wq), &__wait);				\
-	__set_current_state(TASK_RUNNING);				\
-	__ret;								\
-})
-
-
-/**
- * wait_event_interruptible_locked - sleep until a condition gets true
- * @wq: the waitqueue to wait on
- * @condition: a C expression for the event to wait for
- *
- * The process is put to sleep (TASK_INTERRUPTIBLE) until the
- * @condition evaluates to true or a signal is received.
- * The @condition is checked each time the waitqueue @wq is woken up.
- *
- * It must be called with wq.lock being held.  This spinlock is
- * unlocked while sleeping but @condition testing is done while lock
- * is held and when this macro exits the lock is held.
- *
- * The lock is locked/unlocked using spin_lock()/spin_unlock()
- * functions which must match the way they are locked/unlocked outside
- * of this macro.
- *
- * wake_up_locked() has to be called after changing any variable that could
- * change the result of the wait condition.
- *
- * The function will return -ERESTARTSYS if it was interrupted by a
- * signal and 0 if @condition evaluated to true.
- */
-#define wait_event_interruptible_locked(wq, condition)			\
-	((condition)							\
-	 ? 0 : __wait_event_interruptible_locked(wq, condition, 0, 0))
-
-/**
- * wait_event_interruptible_locked_irq - sleep until a condition gets true
- * @wq: the waitqueue to wait on
- * @condition: a C expression for the event to wait for
- *
- * The process is put to sleep (TASK_INTERRUPTIBLE) until the
- * @condition evaluates to true or a signal is received.
- * The @condition is checked each time the waitqueue @wq is woken up.
- *
- * It must be called with wq.lock being held.  This spinlock is
- * unlocked while sleeping but @condition testing is done while lock
- * is held and when this macro exits the lock is held.
- *
- * The lock is locked/unlocked using spin_lock_irq()/spin_unlock_irq()
- * functions which must match the way they are locked/unlocked outside
- * of this macro.
- *
- * wake_up_locked() has to be called after changing any variable that could
- * change the result of the wait condition.
- *
- * The function will return -ERESTARTSYS if it was interrupted by a
- * signal and 0 if @condition evaluated to true.
- */
-#define wait_event_interruptible_locked_irq(wq, condition)		\
-	((condition)							\
-	 ? 0 : __wait_event_interruptible_locked(wq, condition, 0, 1))
-
-/**
- * wait_event_interruptible_exclusive_locked - sleep exclusively until a condition gets true
- * @wq: the waitqueue to wait on
- * @condition: a C expression for the event to wait for
- *
- * The process is put to sleep (TASK_INTERRUPTIBLE) until the
- * @condition evaluates to true or a signal is received.
- * The @condition is checked each time the waitqueue @wq is woken up.
- *
- * It must be called with wq.lock being held.  This spinlock is
- * unlocked while sleeping but @condition testing is done while lock
- * is held and when this macro exits the lock is held.
- *
- * The lock is locked/unlocked using spin_lock()/spin_unlock()
- * functions which must match the way they are locked/unlocked outside
- * of this macro.
- *
- * The process is put on the wait queue with an WQ_FLAG_EXCLUSIVE flag
- * set thus when other process waits process on the list if this
- * process is awaken further processes are not considered.
- *
- * wake_up_locked() has to be called after changing any variable that could
- * change the result of the wait condition.
- *
- * The function will return -ERESTARTSYS if it was interrupted by a
- * signal and 0 if @condition evaluated to true.
- */
-#define wait_event_interruptible_exclusive_locked(wq, condition)	\
-	((condition)							\
-	 ? 0 : __wait_event_interruptible_locked(wq, condition, 1, 0))
-
-/**
- * wait_event_interruptible_exclusive_locked_irq - sleep until a condition gets true
- * @wq: the waitqueue to wait on
- * @condition: a C expression for the event to wait for
- *
- * The process is put to sleep (TASK_INTERRUPTIBLE) until the
- * @condition evaluates to true or a signal is received.
- * The @condition is checked each time the waitqueue @wq is woken up.
- *
- * It must be called with wq.lock being held.  This spinlock is
- * unlocked while sleeping but @condition testing is done while lock
- * is held and when this macro exits the lock is held.
- *
- * The lock is locked/unlocked using spin_lock_irq()/spin_unlock_irq()
- * functions which must match the way they are locked/unlocked outside
- * of this macro.
- *
- * The process is put on the wait queue with an WQ_FLAG_EXCLUSIVE flag
- * set thus when other process waits process on the list if this
- * process is awaken further processes are not considered.
- *
- * wake_up_locked() has to be called after changing any variable that could
- * change the result of the wait condition.
- *
- * The function will return -ERESTARTSYS if it was interrupted by a
- * signal and 0 if @condition evaluated to true.
- */
-#define wait_event_interruptible_exclusive_locked_irq(wq, condition)	\
-	((condition)							\
-	 ? 0 : __wait_event_interruptible_locked(wq, condition, 1, 1))
-
-
-
-#define __wait_event_killable(wq, condition, ret)			\
-do {									\
-	DEFINE_WAIT(__wait);						\
-									\
-	for (;;) {							\
-		prepare_to_wait(&wq, &__wait, TASK_KILLABLE);		\
-		if (condition)						\
-			break;						\
-		if (!fatal_signal_pending(current)) {			\
-			schedule();					\
-			continue;					\
-		}							\
-		ret = -ERESTARTSYS;					\
-		break;							\
-	}								\
-	finish_wait(&wq, &__wait);					\
-} while (0)
-
-/**
- * wait_event_killable - sleep until a condition gets true
- * @wq: the waitqueue to wait on
- * @condition: a C expression for the event to wait for
- *
- * The process is put to sleep (TASK_KILLABLE) until the
- * @condition evaluates to true or a signal is received.
- * The @condition is checked each time the waitqueue @wq is woken up.
- *
- * wake_up() has to be called after changing any variable that could
- * change the result of the wait condition.
- *
- * The function will return -ERESTARTSYS if it was interrupted by a
- * signal and 0 if @condition evaluated to true.
- */
-#define wait_event_killable(wq, condition)				\
-({									\
-	int __ret = 0;							\
-	if (!(condition))						\
-		__wait_event_killable(wq, condition, __ret);		\
-	__ret;								\
-})
-
-/*
- * These are the old interfaces to sleep waiting for an event.
- * They are racy.  DO NOT use them, use the wait_event* interfaces above.
- * We plan to remove these interfaces.
- */
-extern void sleep_on(wait_queue_head_t *q);
-extern long sleep_on_timeout(wait_queue_head_t *q,
-				      signed long timeout);
-extern void interruptible_sleep_on(wait_queue_head_t *q);
-extern long interruptible_sleep_on_timeout(wait_queue_head_t *q,
-					   signed long timeout);
-
-/*
- * Waitqueues which are removed from the waitqueue_head at wakeup time
- */
-void prepare_to_wait(wait_queue_head_t *q, wait_queue_t *wait, int state);
-void prepare_to_wait_exclusive(wait_queue_head_t *q, wait_queue_t *wait, int state);
-void finish_wait(wait_queue_head_t *q, wait_queue_t *wait);
-void abort_exclusive_wait(wait_queue_head_t *q, wait_queue_t *wait,
-			unsigned int mode, void *key);
-int autoremove_wake_function(wait_queue_t *wait, unsigned mode, int sync, void *key);
-int wake_bit_function(wait_queue_t *wait, unsigned mode, int sync, void *key);
-
-#define DEFINE_WAIT_FUNC(name, function)				\
-	wait_queue_t name = {						\
-		.private	= current,				\
-		.func		= function,				\
-		.task_list	= LIST_HEAD_INIT((name).task_list),	\
-	}
-
-#define DEFINE_WAIT(name) DEFINE_WAIT_FUNC(name, autoremove_wake_function)
-
-#define DEFINE_WAIT_BIT(name, word, bit)				\
-	struct wait_bit_queue name = {					\
-		.key = __WAIT_BIT_KEY_INITIALIZER(word, bit),		\
-		.wait	= {						\
-			.private	= current,			\
-			.func		= wake_bit_function,		\
-			.task_list	=				\
-				LIST_HEAD_INIT((name).wait.task_list),	\
-		},							\
-	}
-
-#define init_wait(wait)							\
-	do {								\
-		(wait)->private = current;				\
-		(wait)->func = autoremove_wake_function;		\
-		INIT_LIST_HEAD(&(wait)->task_list);			\
-		(wait)->flags = 0;					\
-	} while (0)
-
-/**
- * wait_on_bit - wait for a bit to be cleared
- * @word: the word being waited on, a kernel virtual address
- * @bit: the bit of the word being waited on
- * @action: the function used to sleep, which may take special actions
- * @mode: the task state to sleep in
- *
- * There is a standard hashed waitqueue table for generic use. This
- * is the part of the hashtable's accessor API that waits on a bit.
- * For instance, if one were to have waiters on a bitflag, one would
- * call wait_on_bit() in threads waiting for the bit to clear.
- * One uses wait_on_bit() where one is waiting for the bit to clear,
- * but has no intention of setting it.
- */
-static inline int wait_on_bit(void *word, int bit,
-				int (*action)(void *), unsigned mode)
-{
-	if (!test_bit(bit, word))
-		return 0;
-	return out_of_line_wait_on_bit(word, bit, action, mode);
-}
-
-/**
- * wait_on_bit_lock - wait for a bit to be cleared, when wanting to set it
- * @word: the word being waited on, a kernel virtual address
- * @bit: the bit of the word being waited on
- * @action: the function used to sleep, which may take special actions
- * @mode: the task state to sleep in
- *
- * There is a standard hashed waitqueue table for generic use. This
- * is the part of the hashtable's accessor API that waits on a bit
- * when one intends to set it, for instance, trying to lock bitflags.
- * For instance, if one were to have waiters trying to set bitflag
- * and waiting for it to clear before setting it, one would call
- * wait_on_bit() in threads waiting to be able to set the bit.
- * One uses wait_on_bit_lock() where one is waiting for the bit to
- * clear with the intention of setting it, and when done, clearing it.
- */
-static inline int wait_on_bit_lock(void *word, int bit,
-				int (*action)(void *), unsigned mode)
-{
-	if (!test_and_set_bit(bit, word))
-		return 0;
-	return out_of_line_wait_on_bit_lock(word, bit, action, mode);
-}
-	
-#endif /* __KERNEL__ */
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/wakelock.h b/ANDROID_3.4.5/include/linux/wakelock.h
deleted file mode 100644
index f4a698a2..00000000
--- a/ANDROID_3.4.5/include/linux/wakelock.h
+++ /dev/null
@@ -1,67 +0,0 @@
-/* include/linux/wakelock.h
- *
- * Copyright (C) 2007-2012 Google, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef _LINUX_WAKELOCK_H
-#define _LINUX_WAKELOCK_H
-
-#include <linux/ktime.h>
-#include <linux/device.h>
-
-/* A wake_lock prevents the system from entering suspend or other low power
- * states when active. If the type is set to WAKE_LOCK_SUSPEND, the wake_lock
- * prevents a full system suspend.
- */
-
-enum {
-	WAKE_LOCK_SUSPEND, /* Prevent suspend */
-	WAKE_LOCK_TYPE_COUNT
-};
-
-struct wake_lock {
-	struct wakeup_source ws;
-};
-
-static inline void wake_lock_init(struct wake_lock *lock, int type,
-				  const char *name)
-{
-	wakeup_source_init(&lock->ws, name);
-}
-
-static inline void wake_lock_destroy(struct wake_lock *lock)
-{
-	wakeup_source_trash(&lock->ws);
-}
-
-static inline void wake_lock(struct wake_lock *lock)
-{
-	__pm_stay_awake(&lock->ws);
-}
-
-static inline void wake_lock_timeout(struct wake_lock *lock, long timeout)
-{
-	__pm_wakeup_event(&lock->ws, jiffies_to_msecs(timeout));
-}
-
-static inline void wake_unlock(struct wake_lock *lock)
-{
-	__pm_relax(&lock->ws);
-}
-
-static inline int wake_lock_active(struct wake_lock *lock)
-{
-	return lock->ws.active;
-}
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/wanrouter.h b/ANDROID_3.4.5/include/linux/wanrouter.h
deleted file mode 100644
index 3157cc1f..00000000
--- a/ANDROID_3.4.5/include/linux/wanrouter.h
+++ /dev/null
@@ -1,532 +0,0 @@
-/*****************************************************************************
-* wanrouter.h	Definitions for the WAN Multiprotocol Router Module.
-*		This module provides API and common services for WAN Link
-*		Drivers and is completely hardware-independent.
-*
-* Author: 	Nenad Corbic <ncorbic@sangoma.com>
-*		Gideon Hack 	
-* Additions:	Arnaldo Melo
-*
-* Copyright:	(c) 1995-2000 Sangoma Technologies Inc.
-*
-*		This program is free software; you can redistribute it and/or
-*		modify it under the terms of the GNU General Public License
-*		as published by the Free Software Foundation; either version
-*		2 of the License, or (at your option) any later version.
-* ============================================================================
-* Jul 21, 2000  Nenad Corbic	Added WAN_FT1_READY State
-* Feb 24, 2000  Nenad Corbic    Added support for socket based x25api
-* Jan 28, 2000  Nenad Corbic    Added support for the ASYNC protocol.
-* Oct 04, 1999  Nenad Corbic 	Updated for 2.1.0 release
-* Jun 02, 1999  Gideon Hack	Added support for the S514 adapter.
-* May 23, 1999	Arnaldo Melo	Added local_addr to wanif_conf_t
-*				WAN_DISCONNECTING state added
-* Jul 20, 1998	David Fong	Added Inverse ARP options to 'wanif_conf_t'
-* Jun 12, 1998	David Fong	Added Cisco HDLC support.
-* Dec 16, 1997	Jaspreet Singh	Moved 'enable_IPX' and 'network_number' to
-*				'wanif_conf_t'
-* Dec 05, 1997	Jaspreet Singh	Added 'pap', 'chap' to 'wanif_conf_t'
-*				Added 'authenticator' to 'wan_ppp_conf_t'
-* Nov 06, 1997	Jaspreet Singh	Changed Router Driver version to 1.1 from 1.0
-* Oct 20, 1997	Jaspreet Singh	Added 'cir','bc','be' and 'mc' to 'wanif_conf_t'
-*				Added 'enable_IPX' and 'network_number' to 
-*				'wan_device_t'.  Also added defines for
-*				UDP PACKET TYPE, Interrupt test, critical values
-*				for RACE conditions.
-* Oct 05, 1997	Jaspreet Singh	Added 'dlci_num' and 'dlci[100]' to 
-*				'wan_fr_conf_t' to configure a list of dlci(s)
-*				for a NODE 
-* Jul 07, 1997	Jaspreet Singh	Added 'ttl' to 'wandev_conf_t' & 'wan_device_t'
-* May 29, 1997 	Jaspreet Singh	Added 'tx_int_enabled' to 'wan_device_t'
-* May 21, 1997	Jaspreet Singh	Added 'udp_port' to 'wan_device_t'
-* Apr 25, 1997  Farhan Thawar   Added 'udp_port' to 'wandev_conf_t'
-* Jan 16, 1997	Gene Kozin	router_devlist made public
-* Jan 02, 1997	Gene Kozin	Initial version (based on wanpipe.h).
-*****************************************************************************/
-
-#ifndef	_ROUTER_H
-#define	_ROUTER_H
-
-#define	ROUTER_NAME	"wanrouter"	/* in case we ever change it */
-#define	ROUTER_VERSION	1		/* version number */
-#define	ROUTER_RELEASE	1		/* release (minor version) number */
-#define	ROUTER_IOCTL	'W'		/* for IOCTL calls */
-#define	ROUTER_MAGIC	0x524D4157L	/* signature: 'WANR' reversed */
-
-/* IOCTL codes for /proc/router/<device> entries (up to 255) */
-enum router_ioctls
-{
-	ROUTER_SETUP	= ROUTER_IOCTL<<8,	/* configure device */
-	ROUTER_DOWN,				/* shut down device */
-	ROUTER_STAT,				/* get device status */
-	ROUTER_IFNEW,				/* add interface */
-	ROUTER_IFDEL,				/* delete interface */
-	ROUTER_IFSTAT,				/* get interface status */
-	ROUTER_USER	= (ROUTER_IOCTL<<8)+16,	/* driver-specific calls */
-	ROUTER_USER_MAX	= (ROUTER_IOCTL<<8)+31
-};
-
-/* identifiers for displaying proc file data for dual port adapters */
-#define PROC_DATA_PORT_0 0x8000	/* the data is for port 0 */
-#define PROC_DATA_PORT_1 0x8001	/* the data is for port 1 */
-
-/* NLPID for packet encapsulation (ISO/IEC TR 9577) */
-#define	NLPID_IP	0xCC	/* Internet Protocol Datagram */
-#define	NLPID_SNAP	0x80	/* IEEE Subnetwork Access Protocol */
-#define	NLPID_CLNP	0x81	/* ISO/IEC 8473 */
-#define	NLPID_ESIS	0x82	/* ISO/IEC 9542 */
-#define	NLPID_ISIS	0x83	/* ISO/IEC ISIS */
-#define	NLPID_Q933	0x08	/* CCITT Q.933 */
-
-/* Miscellaneous */
-#define	WAN_IFNAME_SZ	15	/* max length of the interface name */
-#define	WAN_DRVNAME_SZ	15	/* max length of the link driver name */
-#define	WAN_ADDRESS_SZ	31	/* max length of the WAN media address */
-#define USED_BY_FIELD	8	/* max length of the used by field */
-
-/* Defines for UDP PACKET TYPE */
-#define UDP_PTPIPE_TYPE 	0x01
-#define UDP_FPIPE_TYPE		0x02
-#define UDP_CPIPE_TYPE		0x03
-#define UDP_DRVSTATS_TYPE 	0x04
-#define UDP_INVALID_TYPE  	0x05
-
-/* Command return code */
-#define CMD_OK		0		/* normal firmware return code */
-#define CMD_TIMEOUT	0xFF		/* firmware command timed out */
-
-/* UDP Packet Management */
-#define UDP_PKT_FRM_STACK	0x00
-#define UDP_PKT_FRM_NETWORK	0x01
-
-/* Maximum interrupt test counter */
-#define MAX_INTR_TEST_COUNTER	100
-
-/* Critical Values for RACE conditions*/
-#define CRITICAL_IN_ISR		0xA1
-#define CRITICAL_INTR_HANDLED	0xB1
-
-/****** Data Types **********************************************************/
-
-/*----------------------------------------------------------------------------
- * X.25-specific link-level configuration.
- */
-typedef struct wan_x25_conf
-{
-	unsigned lo_pvc;	/* lowest permanent circuit number */
-	unsigned hi_pvc;	/* highest permanent circuit number */
-	unsigned lo_svc;	/* lowest switched circuit number */
-	unsigned hi_svc;	/* highest switched circuit number */
-	unsigned hdlc_window;	/* HDLC window size (1..7) */
-	unsigned pkt_window;	/* X.25 packet window size (1..7) */
-	unsigned t1;		/* HDLC timer T1, sec (1..30) */
-	unsigned t2;		/* HDLC timer T2, sec (0..29) */
-	unsigned t4;		/* HDLC supervisory frame timer = T4 * T1 */
-	unsigned n2;		/* HDLC retransmission limit (1..30) */
-	unsigned t10_t20;	/* X.25 RESTART timeout, sec (1..255) */
-	unsigned t11_t21;	/* X.25 CALL timeout, sec (1..255) */
-	unsigned t12_t22;	/* X.25 RESET timeout, sec (1..255) */
-	unsigned t13_t23;	/* X.25 CLEAR timeout, sec (1..255) */
-	unsigned t16_t26;	/* X.25 INTERRUPT timeout, sec (1..255) */
-	unsigned t28;		/* X.25 REGISTRATION timeout, sec (1..255) */
-	unsigned r10_r20;	/* RESTART retransmission limit (0..250) */
-	unsigned r12_r22;	/* RESET retransmission limit (0..250) */
-	unsigned r13_r23;	/* CLEAR retransmission limit (0..250) */
-	unsigned ccitt_compat;	/* compatibility mode: 1988/1984/1980 */
-	unsigned x25_conf_opt;   /* User defined x25 config optoins */
-	unsigned char LAPB_hdlc_only; /* Run in HDLC only mode */
-	unsigned char logging;   /* Control connection logging */  
-	unsigned char oob_on_modem; /* Whether to send modem status to the user app */
-} wan_x25_conf_t;
-
-/*----------------------------------------------------------------------------
- * Frame relay specific link-level configuration.
- */
-typedef struct wan_fr_conf
-{
-	unsigned signalling;	/* local in-channel signalling type */
-	unsigned t391;		/* link integrity verification timer */
-	unsigned t392;		/* polling verification timer */
-	unsigned n391;		/* full status polling cycle counter */
-	unsigned n392;		/* error threshold counter */
-	unsigned n393;		/* monitored events counter */
-	unsigned dlci_num;	/* number of DLCs (access node) */
-	unsigned  dlci[100];    /* List of all DLCIs */
-} wan_fr_conf_t;
-
-/*----------------------------------------------------------------------------
- * PPP-specific link-level configuration.
- */
-typedef struct wan_ppp_conf
-{
-	unsigned restart_tmr;	/* restart timer */
-	unsigned auth_rsrt_tmr;	/* authentication timer */
-	unsigned auth_wait_tmr;	/* authentication timer */
-	unsigned mdm_fail_tmr;	/* modem failure timer */
-	unsigned dtr_drop_tmr;	/* DTR drop timer */
-	unsigned connect_tmout;	/* connection timeout */
-	unsigned conf_retry;	/* max. retry */
-	unsigned term_retry;	/* max. retry */
-	unsigned fail_retry;	/* max. retry */
-	unsigned auth_retry;	/* max. retry */
-	unsigned auth_options;	/* authentication opt. */
-	unsigned ip_options;	/* IP options */
-	char	authenticator;	/* AUTHENTICATOR or not */
-	char	ip_mode;	/* Static/Host/Peer */
-} wan_ppp_conf_t;
-
-/*----------------------------------------------------------------------------
- * CHDLC-specific link-level configuration.
- */
-typedef struct wan_chdlc_conf
-{
-	unsigned char ignore_dcd;	/* Protocol options:		*/
-	unsigned char ignore_cts;	/*  Ignore these to determine	*/
-	unsigned char ignore_keepalive;	/*  link status (Yes or No)	*/
-	unsigned char hdlc_streaming;	/*  hdlc_streaming mode (Y/N) */
-	unsigned char receive_only;	/*  no transmit buffering (Y/N) */
-	unsigned keepalive_tx_tmr;	/* transmit keepalive timer */
-	unsigned keepalive_rx_tmr;	/* receive  keepalive timer */
-	unsigned keepalive_err_margin;	/* keepalive_error_tolerance */
-	unsigned slarp_timer;		/* SLARP request timer */
-} wan_chdlc_conf_t;
-
-
-/*----------------------------------------------------------------------------
- * WAN device configuration. Passed to ROUTER_SETUP IOCTL.
- */
-typedef struct wandev_conf
-{
-	unsigned magic;		/* magic number (for verification) */
-	unsigned config_id;	/* configuration structure identifier */
-				/****** hardware configuration ******/
-	unsigned ioport;	/* adapter I/O port base */
-	unsigned long maddr;	/* dual-port memory address */
-	unsigned msize;		/* dual-port memory size */
-	int irq;		/* interrupt request level */
-	int dma;		/* DMA request level */
-        char S514_CPU_no[1];	/* S514 PCI adapter CPU number ('A' or 'B') */
-        unsigned PCI_slot_no;	/* S514 PCI adapter slot number */
-	char auto_pci_cfg;	/* S515 PCI automatic slot detection */
-	char comm_port;		/* Communication Port (PRI=0, SEC=1) */ 
-	unsigned bps;		/* data transfer rate */
-	unsigned mtu;		/* maximum transmit unit size */
-        unsigned udp_port;      /* UDP port for management */
-	unsigned char ttl;	/* Time To Live for UDP security */
-	unsigned char ft1;	/* FT1 Configurator Option */
-        char interface;		/* RS-232/V.35, etc. */
-	char clocking;		/* external/internal */
-	char line_coding;	/* NRZ/NRZI/FM0/FM1, etc. */
-	char station;		/* DTE/DCE, primary/secondary, etc. */
-	char connection;	/* permanent/switched/on-demand */
-	char read_mode;		/* read mode: Polling or interrupt */
-	char receive_only;	/* disable tx buffers */
-	char tty;		/* Create a fake tty device */
-	unsigned tty_major;	/* Major number for wanpipe tty device */
-	unsigned tty_minor; 	/* Minor number for wanpipe tty device */
-	unsigned tty_mode;	/* TTY operation mode SYNC or ASYNC */
-	char backup;		/* Backup Mode */
-	unsigned hw_opt[4];	/* other hardware options */
-	unsigned reserved[4];
-				/****** arbitrary data ***************/
-	unsigned data_size;	/* data buffer size */
-	void* data;		/* data buffer, e.g. firmware */
-	union			/****** protocol-specific ************/
-	{
-		wan_x25_conf_t x25;	/* X.25 configuration */
-		wan_ppp_conf_t ppp;	/* PPP configuration */
-		wan_fr_conf_t fr;	/* frame relay configuration */
-		wan_chdlc_conf_t chdlc;	/* Cisco HDLC configuration */
-	} u;
-} wandev_conf_t;
-
-/* 'config_id' definitions */
-#define	WANCONFIG_X25	101	/* X.25 link */
-#define	WANCONFIG_FR	102	/* frame relay link */
-#define	WANCONFIG_PPP	103	/* synchronous PPP link */
-#define WANCONFIG_CHDLC	104	/* Cisco HDLC Link */
-#define WANCONFIG_BSC	105	/* BiSync Streaming */
-#define WANCONFIG_HDLC	106	/* HDLC Support */
-#define WANCONFIG_MPPP  107	/* Multi Port PPP over RAW CHDLC */
-
-/*
- * Configuration options defines.
- */
-/* general options */
-#define	WANOPT_OFF	0
-#define	WANOPT_ON	1
-#define	WANOPT_NO	0
-#define	WANOPT_YES	1
-
-/* intercace options */
-#define	WANOPT_RS232	0
-#define	WANOPT_V35	1
-
-/* data encoding options */
-#define	WANOPT_NRZ	0
-#define	WANOPT_NRZI	1
-#define	WANOPT_FM0	2
-#define	WANOPT_FM1	3
-
-/* link type options */
-#define	WANOPT_POINTTOPOINT	0	/* RTS always active */
-#define	WANOPT_MULTIDROP	1	/* RTS is active when transmitting */
-
-/* clocking options */
-#define	WANOPT_EXTERNAL	0
-#define	WANOPT_INTERNAL	1
-
-/* station options */
-#define	WANOPT_DTE		0
-#define	WANOPT_DCE		1
-#define	WANOPT_CPE		0
-#define	WANOPT_NODE		1
-#define	WANOPT_SECONDARY	0
-#define	WANOPT_PRIMARY		1
-
-/* connection options */
-#define	WANOPT_PERMANENT	0	/* DTR always active */
-#define	WANOPT_SWITCHED		1	/* use DTR to setup link (dial-up) */
-#define	WANOPT_ONDEMAND		2	/* activate DTR only before sending */
-
-/* frame relay in-channel signalling */
-#define	WANOPT_FR_ANSI		1	/* ANSI T1.617 Annex D */
-#define	WANOPT_FR_Q933		2	/* ITU Q.933A */
-#define	WANOPT_FR_LMI		3	/* LMI */
-
-/* PPP IP Mode Options */
-#define	WANOPT_PPP_STATIC	0
-#define	WANOPT_PPP_HOST		1
-#define	WANOPT_PPP_PEER		2
-
-/* ASY Mode Options */
-#define WANOPT_ONE 		1
-#define WANOPT_TWO		2
-#define WANOPT_ONE_AND_HALF	3
-
-#define WANOPT_NONE	0
-#define WANOPT_ODD      1
-#define WANOPT_EVEN	2
-
-/* CHDLC Protocol Options */
-/* DF Commented out for now.
-
-#define WANOPT_CHDLC_NO_DCD		IGNORE_DCD_FOR_LINK_STAT
-#define WANOPT_CHDLC_NO_CTS		IGNORE_CTS_FOR_LINK_STAT
-#define WANOPT_CHDLC_NO_KEEPALIVE	IGNORE_KPALV_FOR_LINK_STAT
-*/
-
-/* Port options */
-#define WANOPT_PRI 0
-#define WANOPT_SEC 1
-/* read mode */
-#define	WANOPT_INTR	0
-#define WANOPT_POLL	1
-
-
-#define WANOPT_TTY_SYNC  0
-#define WANOPT_TTY_ASYNC 1
-/*----------------------------------------------------------------------------
- * WAN Link Status Info (for ROUTER_STAT IOCTL).
- */
-typedef struct wandev_stat
-{
-	unsigned state;		/* link state */
-	unsigned ndev;		/* number of configured interfaces */
-
-	/* link/interface configuration */
-	unsigned connection;	/* permanent/switched/on-demand */
-	unsigned media_type;	/* Frame relay/PPP/X.25/SDLC, etc. */
-	unsigned mtu;		/* max. transmit unit for this device */
-
-	/* physical level statistics */
-	unsigned modem_status;	/* modem status */
-	unsigned rx_frames;	/* received frames count */
-	unsigned rx_overruns;	/* receiver overrun error count */
-	unsigned rx_crc_err;	/* receive CRC error count */
-	unsigned rx_aborts;	/* received aborted frames count */
-	unsigned rx_bad_length;	/* unexpetedly long/short frames count */
-	unsigned rx_dropped;	/* frames discarded at device level */
-	unsigned tx_frames;	/* transmitted frames count */
-	unsigned tx_underruns;	/* aborted transmissions (underruns) count */
-	unsigned tx_timeouts;	/* transmission timeouts */
-	unsigned tx_rejects;	/* other transmit errors */
-
-	/* media level statistics */
-	unsigned rx_bad_format;	/* frames with invalid format */
-	unsigned rx_bad_addr;	/* frames with invalid media address */
-	unsigned tx_retries;	/* frames re-transmitted */
-	unsigned reserved[16];	/* reserved for future use */
-} wandev_stat_t;
-
-/* 'state' defines */
-enum wan_states
-{
-	WAN_UNCONFIGURED,	/* link/channel is not configured */
-	WAN_DISCONNECTED,	/* link/channel is disconnected */
-	WAN_CONNECTING,		/* connection is in progress */
-	WAN_CONNECTED,		/* link/channel is operational */
-	WAN_LIMIT,		/* for verification only */
-	WAN_DUALPORT,		/* for Dual Port cards */
-	WAN_DISCONNECTING,
-	WAN_FT1_READY		/* FT1 Configurator Ready */
-};
-
-enum {
-	WAN_LOCAL_IP,
-	WAN_POINTOPOINT_IP,
-	WAN_NETMASK_IP,
-	WAN_BROADCAST_IP
-};
-
-/* 'modem_status' masks */
-#define	WAN_MODEM_CTS	0x0001	/* CTS line active */
-#define	WAN_MODEM_DCD	0x0002	/* DCD line active */
-#define	WAN_MODEM_DTR	0x0010	/* DTR line active */
-#define	WAN_MODEM_RTS	0x0020	/* RTS line active */
-
-/*----------------------------------------------------------------------------
- * WAN interface (logical channel) configuration (for ROUTER_IFNEW IOCTL).
- */
-typedef struct wanif_conf
-{
-	unsigned magic;			/* magic number */
-	unsigned config_id;		/* configuration identifier */
-	char name[WAN_IFNAME_SZ+1];	/* interface name, ASCIIZ */
-	char addr[WAN_ADDRESS_SZ+1];	/* media address, ASCIIZ */
-	char usedby[USED_BY_FIELD];	/* used by API or WANPIPE */
-	unsigned idle_timeout;		/* sec, before disconnecting */
-	unsigned hold_timeout;		/* sec, before re-connecting */
-	unsigned cir;			/* Committed Information Rate fwd,bwd*/
-	unsigned bc;			/* Committed Burst Size fwd, bwd */
-	unsigned be;			/* Excess Burst Size fwd, bwd */ 
-	unsigned char enable_IPX;	/* Enable or Disable IPX */
-	unsigned char inarp;		/* Send Inverse ARP requests Y/N */
-	unsigned inarp_interval;	/* sec, between InARP requests */
-	unsigned long network_number;	/* Network Number for IPX */
-	char mc;			/* Multicast on or off */
-	char local_addr[WAN_ADDRESS_SZ+1];/* local media address, ASCIIZ */
-	unsigned char port;		/* board port */
-	unsigned char protocol;		/* prococol used in this channel (TCPOX25 or X25) */
-	char pap;			/* PAP enabled or disabled */
-	char chap;			/* CHAP enabled or disabled */
-	unsigned char userid[511];	/* List of User Id */
-	unsigned char passwd[511];	/* List of passwords */
-	unsigned char sysname[31];	/* Name of the system */
-	unsigned char ignore_dcd;	/* Protocol options: */
-	unsigned char ignore_cts;	/*  Ignore these to determine */
-	unsigned char ignore_keepalive;	/*  link status (Yes or No) */
-	unsigned char hdlc_streaming;	/*  Hdlc streaming mode (Y/N) */
-	unsigned keepalive_tx_tmr;	/* transmit keepalive timer */
-	unsigned keepalive_rx_tmr;	/* receive  keepalive timer */
-	unsigned keepalive_err_margin;	/* keepalive_error_tolerance */
-	unsigned slarp_timer;		/* SLARP request timer */
-	unsigned char ttl;		/* Time To Live for UDP security */
-	char interface;			/* RS-232/V.35, etc. */
-	char clocking;			/* external/internal */
-	unsigned bps;			/* data transfer rate */
-	unsigned mtu;			/* maximum transmit unit size */
-	unsigned char if_down;		/* brind down interface when disconnected */
-	unsigned char gateway;		/* Is this interface a gateway */
-	unsigned char true_if_encoding;	/* Set the dev->type to true board protocol */
-
-	unsigned char asy_data_trans;     /* async API options */
-        unsigned char rts_hs_for_receive; /* async Protocol options */
-        unsigned char xon_xoff_hs_for_receive;
-	unsigned char xon_xoff_hs_for_transmit;
-	unsigned char dcd_hs_for_transmit;
-	unsigned char cts_hs_for_transmit;
-	unsigned char async_mode;
-	unsigned tx_bits_per_char;
-	unsigned rx_bits_per_char;
-	unsigned stop_bits;  
-	unsigned char parity;
- 	unsigned break_timer;
-        unsigned inter_char_timer;
-	unsigned rx_complete_length;
-	unsigned xon_char;
-	unsigned xoff_char;
-	unsigned char receive_only;	/*  no transmit buffering (Y/N) */
-} wanif_conf_t;
-
-#ifdef	__KERNEL__
-/****** Kernel Interface ****************************************************/
-
-#include <linux/fs.h>		/* support for device drivers */
-#include <linux/proc_fs.h>	/* proc filesystem pragmatics */
-#include <linux/netdevice.h>	/* support for network drivers */
-#include <linux/spinlock.h>     /* Support for SMP Locking */
-
-/*----------------------------------------------------------------------------
- * WAN device data space.
- */
-struct wan_device {
-	unsigned magic;			/* magic number */
-	char* name;			/* -> WAN device name (ASCIIZ) */
-	void* private;			/* -> driver private data */
-	unsigned config_id;		/* Configuration ID */
-					/****** hardware configuration ******/
-	unsigned ioport;		/* adapter I/O port base #1 */
-	char S514_cpu_no[1];		/* PCI CPU Number */
-	unsigned char S514_slot_no;	/* PCI Slot Number */
-	unsigned long maddr;		/* dual-port memory address */
-	unsigned msize;			/* dual-port memory size */
-	int irq;			/* interrupt request level */
-	int dma;			/* DMA request level */
-	unsigned bps;			/* data transfer rate */
-	unsigned mtu;			/* max physical transmit unit size */
-	unsigned udp_port;              /* UDP port for management */
-        unsigned char ttl;		/* Time To Live for UDP security */
-	unsigned enable_tx_int; 	/* Transmit Interrupt enabled or not */
-	char interface;			/* RS-232/V.35, etc. */
-	char clocking;			/* external/internal */
-	char line_coding;		/* NRZ/NRZI/FM0/FM1, etc. */
-	char station;			/* DTE/DCE, primary/secondary, etc. */
-	char connection;		/* permanent/switched/on-demand */
-	char signalling;		/* Signalling RS232 or V35 */
-	char read_mode;			/* read mode: Polling or interrupt */
-	char new_if_cnt;                /* Number of interfaces per wanpipe */ 
-	char del_if_cnt;		/* Number of times del_if() gets called */
-	unsigned char piggyback;        /* Piggibacking a port */
-	unsigned hw_opt[4];		/* other hardware options */
-					/****** status and statistics *******/
-	char state;			/* device state */
-	char api_status;		/* device api status */
-	struct net_device_stats stats; 	/* interface statistics */
-	unsigned reserved[16];		/* reserved for future use */
-	unsigned long critical;		/* critical section flag */
-	spinlock_t lock;                /* Support for SMP Locking */
-
-					/****** device management methods ***/
-	int (*setup) (struct wan_device *wandev, wandev_conf_t *conf);
-	int (*shutdown) (struct wan_device *wandev);
-	int (*update) (struct wan_device *wandev);
-	int (*ioctl) (struct wan_device *wandev, unsigned cmd,
-		unsigned long arg);
-	int (*new_if)(struct wan_device *wandev, struct net_device *dev,
-		      wanif_conf_t *conf);
-	int (*del_if)(struct wan_device *wandev, struct net_device *dev);
-					/****** maintained by the router ****/
-	struct wan_device* next;	/* -> next device */
-	struct net_device* dev;		/* list of network interfaces */
-	unsigned ndev;			/* number of interfaces */
-	struct proc_dir_entry *dent;	/* proc filesystem entry */
-};
-
-/* Public functions available for device drivers */
-extern int register_wan_device(struct wan_device *wandev);
-extern int unregister_wan_device(char *name);
-
-/* Proc interface functions. These must not be called by the drivers! */
-extern int wanrouter_proc_init(void);
-extern void wanrouter_proc_cleanup(void);
-extern int wanrouter_proc_add(struct wan_device *wandev);
-extern int wanrouter_proc_delete(struct wan_device *wandev);
-extern long wanrouter_ioctl(struct file *file, unsigned int cmd, unsigned long arg);
-
-/* Public Data */
-/* list of registered devices */
-extern struct wan_device *wanrouter_router_devlist;
-
-#endif	/* __KERNEL__ */
-#endif	/* _ROUTER_H */
diff --git a/ANDROID_3.4.5/include/linux/watchdog.h b/ANDROID_3.4.5/include/linux/watchdog.h
deleted file mode 100644
index ac40716b..00000000
--- a/ANDROID_3.4.5/include/linux/watchdog.h
+++ /dev/null
@@ -1,155 +0,0 @@
-/*
- *	Generic watchdog defines. Derived from..
- *
- * Berkshire PC Watchdog Defines
- * by Ken Hollis <khollis@bitgate.com>
- *
- */
-
-#ifndef _LINUX_WATCHDOG_H
-#define _LINUX_WATCHDOG_H
-
-#include <linux/ioctl.h>
-#include <linux/types.h>
-
-#define	WATCHDOG_IOCTL_BASE	'W'
-
-struct watchdog_info {
-	__u32 options;		/* Options the card/driver supports */
-	__u32 firmware_version;	/* Firmware version of the card */
-	__u8  identity[32];	/* Identity of the board */
-};
-
-#define	WDIOC_GETSUPPORT	_IOR(WATCHDOG_IOCTL_BASE, 0, struct watchdog_info)
-#define	WDIOC_GETSTATUS		_IOR(WATCHDOG_IOCTL_BASE, 1, int)
-#define	WDIOC_GETBOOTSTATUS	_IOR(WATCHDOG_IOCTL_BASE, 2, int)
-#define	WDIOC_GETTEMP		_IOR(WATCHDOG_IOCTL_BASE, 3, int)
-#define	WDIOC_SETOPTIONS	_IOR(WATCHDOG_IOCTL_BASE, 4, int)
-#define	WDIOC_KEEPALIVE		_IOR(WATCHDOG_IOCTL_BASE, 5, int)
-#define	WDIOC_SETTIMEOUT        _IOWR(WATCHDOG_IOCTL_BASE, 6, int)
-#define	WDIOC_GETTIMEOUT        _IOR(WATCHDOG_IOCTL_BASE, 7, int)
-#define	WDIOC_SETPRETIMEOUT	_IOWR(WATCHDOG_IOCTL_BASE, 8, int)
-#define	WDIOC_GETPRETIMEOUT	_IOR(WATCHDOG_IOCTL_BASE, 9, int)
-#define	WDIOC_GETTIMELEFT	_IOR(WATCHDOG_IOCTL_BASE, 10, int)
-
-#define	WDIOF_UNKNOWN		-1	/* Unknown flag error */
-#define	WDIOS_UNKNOWN		-1	/* Unknown status error */
-
-#define	WDIOF_OVERHEAT		0x0001	/* Reset due to CPU overheat */
-#define	WDIOF_FANFAULT		0x0002	/* Fan failed */
-#define	WDIOF_EXTERN1		0x0004	/* External relay 1 */
-#define	WDIOF_EXTERN2		0x0008	/* External relay 2 */
-#define	WDIOF_POWERUNDER	0x0010	/* Power bad/power fault */
-#define	WDIOF_CARDRESET		0x0020	/* Card previously reset the CPU */
-#define	WDIOF_POWEROVER		0x0040	/* Power over voltage */
-#define	WDIOF_SETTIMEOUT	0x0080  /* Set timeout (in seconds) */
-#define	WDIOF_MAGICCLOSE	0x0100	/* Supports magic close char */
-#define	WDIOF_PRETIMEOUT	0x0200  /* Pretimeout (in seconds), get/set */
-#define	WDIOF_KEEPALIVEPING	0x8000	/* Keep alive ping reply */
-
-#define	WDIOS_DISABLECARD	0x0001	/* Turn off the watchdog timer */
-#define	WDIOS_ENABLECARD	0x0002	/* Turn on the watchdog timer */
-#define	WDIOS_TEMPPANIC		0x0004	/* Kernel panic on temperature trip */
-
-#ifdef __KERNEL__
-
-#include <linux/bitops.h>
-
-struct watchdog_ops;
-struct watchdog_device;
-
-/** struct watchdog_ops - The watchdog-devices operations
- *
- * @owner:	The module owner.
- * @start:	The routine for starting the watchdog device.
- * @stop:	The routine for stopping the watchdog device.
- * @ping:	The routine that sends a keepalive ping to the watchdog device.
- * @status:	The routine that shows the status of the watchdog device.
- * @set_timeout:The routine for setting the watchdog devices timeout value.
- * @get_timeleft:The routine that get's the time that's left before a reset.
- * @ioctl:	The routines that handles extra ioctl calls.
- *
- * The watchdog_ops structure contains a list of low-level operations
- * that control a watchdog device. It also contains the module that owns
- * these operations. The start and stop function are mandatory, all other
- * functions are optonal.
- */
-struct watchdog_ops {
-	struct module *owner;
-	/* mandatory operations */
-	int (*start)(struct watchdog_device *);
-	int (*stop)(struct watchdog_device *);
-	/* optional operations */
-	int (*ping)(struct watchdog_device *);
-	unsigned int (*status)(struct watchdog_device *);
-	int (*set_timeout)(struct watchdog_device *, unsigned int);
-	unsigned int (*get_timeleft)(struct watchdog_device *);
-	long (*ioctl)(struct watchdog_device *, unsigned int, unsigned long);
-};
-
-/** struct watchdog_device - The structure that defines a watchdog device
- *
- * @info:	Pointer to a watchdog_info structure.
- * @ops:	Pointer to the list of watchdog operations.
- * @bootstatus:	Status of the watchdog device at boot.
- * @timeout:	The watchdog devices timeout value.
- * @min_timeout:The watchdog devices minimum timeout value.
- * @max_timeout:The watchdog devices maximum timeout value.
- * @driver-data:Pointer to the drivers private data.
- * @status:	Field that contains the devices internal status bits.
- *
- * The watchdog_device structure contains all information about a
- * watchdog timer device.
- *
- * The driver-data field may not be accessed directly. It must be accessed
- * via the watchdog_set_drvdata and watchdog_get_drvdata helpers.
- */
-struct watchdog_device {
-	const struct watchdog_info *info;
-	const struct watchdog_ops *ops;
-	unsigned int bootstatus;
-	unsigned int timeout;
-	unsigned int min_timeout;
-	unsigned int max_timeout;
-	void *driver_data;
-	unsigned long status;
-/* Bit numbers for status flags */
-#define WDOG_ACTIVE		0	/* Is the watchdog running/active */
-#define WDOG_DEV_OPEN		1	/* Opened via /dev/watchdog ? */
-#define WDOG_ALLOW_RELEASE	2	/* Did we receive the magic char ? */
-#define WDOG_NO_WAY_OUT		3	/* Is 'nowayout' feature set ? */
-};
-
-#ifdef CONFIG_WATCHDOG_NOWAYOUT
-#define WATCHDOG_NOWAYOUT		1
-#define WATCHDOG_NOWAYOUT_INIT_STATUS	(1 << WDOG_NO_WAY_OUT)
-#else
-#define WATCHDOG_NOWAYOUT		0
-#define WATCHDOG_NOWAYOUT_INIT_STATUS	0
-#endif
-
-/* Use the following function to set the nowayout feature */
-static inline void watchdog_set_nowayout(struct watchdog_device *wdd, bool nowayout)
-{
-	if (nowayout)
-		set_bit(WDOG_NO_WAY_OUT, &wdd->status);
-}
-
-/* Use the following functions to manipulate watchdog driver specific data */
-static inline void watchdog_set_drvdata(struct watchdog_device *wdd, void *data)
-{
-	wdd->driver_data = data;
-}
-
-static inline void *watchdog_get_drvdata(struct watchdog_device *wdd)
-{
-	return wdd->driver_data;
-}
-
-/* drivers/watchdog/core/watchdog_core.c */
-extern int watchdog_register_device(struct watchdog_device *);
-extern void watchdog_unregister_device(struct watchdog_device *);
-
-#endif	/* __KERNEL__ */
-
-#endif  /* ifndef _LINUX_WATCHDOG_H */
diff --git a/ANDROID_3.4.5/include/linux/wifi_tiwlan.h b/ANDROID_3.4.5/include/linux/wifi_tiwlan.h
deleted file mode 100644
index f07e0679..00000000
--- a/ANDROID_3.4.5/include/linux/wifi_tiwlan.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/* include/linux/wifi_tiwlan.h
- *
- * Copyright (C) 2008 Google, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-#ifndef _LINUX_WIFI_TIWLAN_H_
-#define _LINUX_WIFI_TIWLAN_H_
-
-#include <linux/wlan_plat.h>
-
-#define WMPA_NUMBER_OF_SECTIONS	3
-#define WMPA_NUMBER_OF_BUFFERS	160
-#define WMPA_SECTION_HEADER	24
-#define WMPA_SECTION_SIZE_0	(WMPA_NUMBER_OF_BUFFERS * 64)
-#define WMPA_SECTION_SIZE_1	(WMPA_NUMBER_OF_BUFFERS * 256)
-#define WMPA_SECTION_SIZE_2	(WMPA_NUMBER_OF_BUFFERS * 2048)
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/wimax.h b/ANDROID_3.4.5/include/linux/wimax.h
deleted file mode 100644
index 9f6b77af..00000000
--- a/ANDROID_3.4.5/include/linux/wimax.h
+++ /dev/null
@@ -1,239 +0,0 @@
-/*
- * Linux WiMax
- * API for user space
- *
- *
- * Copyright (C) 2007-2008 Intel Corporation. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- *   * Redistributions of source code must retain the above copyright
- *     notice, this list of conditions and the following disclaimer.
- *   * Redistributions in binary form must reproduce the above copyright
- *     notice, this list of conditions and the following disclaimer in
- *     the documentation and/or other materials provided with the
- *     distribution.
- *   * Neither the name of Intel Corporation nor the names of its
- *     contributors may be used to endorse or promote products derived
- *     from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *
- * Intel Corporation <linux-wimax@intel.com>
- * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
- *  - Initial implementation
- *
- *
- * This file declares the user/kernel protocol that is spoken over
- * Generic Netlink, as well as any type declaration that is to be used
- * by kernel and user space.
- *
- * It is intended for user space to clone it verbatim to use it as a
- * primary reference for definitions.
- *
- * Stuff intended for kernel usage as well as full protocol and stack
- * documentation is rooted in include/net/wimax.h.
- */
-
-#ifndef __LINUX__WIMAX_H__
-#define __LINUX__WIMAX_H__
-
-#include <linux/types.h>
-
-enum {
-	/**
-	 * Version of the interface (unsigned decimal, MMm, max 25.5)
-	 * M - Major: change if removing or modifying an existing call.
-	 * m - minor: change when adding a new call
-	 */
-	WIMAX_GNL_VERSION = 01,
-	/* Generic NetLink attributes */
-	WIMAX_GNL_ATTR_INVALID = 0x00,
-	WIMAX_GNL_ATTR_MAX = 10,
-};
-
-
-/*
- * Generic NetLink operations
- *
- * Most of these map to an API call; _OP_ stands for operation, _RP_
- * for reply and _RE_ for report (aka: signal).
- */
-enum {
-	WIMAX_GNL_OP_MSG_FROM_USER,	/* User to kernel message */
-	WIMAX_GNL_OP_MSG_TO_USER,	/* Kernel to user message */
-	WIMAX_GNL_OP_RFKILL,	/* Run wimax_rfkill() */
-	WIMAX_GNL_OP_RESET,	/* Run wimax_rfkill() */
-	WIMAX_GNL_RE_STATE_CHANGE,	/* Report: status change */
-	WIMAX_GNL_OP_STATE_GET,		/* Request for current state */
-};
-
-
-/* Message from user / to user */
-enum {
-	WIMAX_GNL_MSG_IFIDX = 1,
-	WIMAX_GNL_MSG_PIPE_NAME,
-	WIMAX_GNL_MSG_DATA,
-};
-
-
-/*
- * wimax_rfkill()
- *
- * The state of the radio (ON/OFF) is mapped to the rfkill subsystem's
- * switch state (DISABLED/ENABLED).
- */
-enum wimax_rf_state {
-	WIMAX_RF_OFF = 0,	/* Radio is off, rfkill on/enabled */
-	WIMAX_RF_ON = 1,	/* Radio is on, rfkill off/disabled */
-	WIMAX_RF_QUERY = 2,
-};
-
-/* Attributes */
-enum {
-	WIMAX_GNL_RFKILL_IFIDX = 1,
-	WIMAX_GNL_RFKILL_STATE,
-};
-
-
-/* Attributes for wimax_reset() */
-enum {
-	WIMAX_GNL_RESET_IFIDX = 1,
-};
-
-/* Attributes for wimax_state_get() */
-enum {
-	WIMAX_GNL_STGET_IFIDX = 1,
-};
-
-/*
- * Attributes for the Report State Change
- *
- * For now we just have the old and new states; new attributes might
- * be added later on.
- */
-enum {
-	WIMAX_GNL_STCH_IFIDX = 1,
-	WIMAX_GNL_STCH_STATE_OLD,
-	WIMAX_GNL_STCH_STATE_NEW,
-};
-
-
-/**
- * enum wimax_st - The different states of a WiMAX device
- * @__WIMAX_ST_NULL: The device structure has been allocated and zeroed,
- *     but still wimax_dev_add() hasn't been called. There is no state.
- *
- * @WIMAX_ST_DOWN: The device has been registered with the WiMAX and
- *     networking stacks, but it is not initialized (normally that is
- *     done with 'ifconfig DEV up' [or equivalent], which can upload
- *     firmware and enable communications with the device).
- *     In this state, the device is powered down and using as less
- *     power as possible.
- *     This state is the default after a call to wimax_dev_add(). It
- *     is ok to have drivers move directly to %WIMAX_ST_UNINITIALIZED
- *     or %WIMAX_ST_RADIO_OFF in _probe() after the call to
- *     wimax_dev_add().
- *     It is recommended that the driver leaves this state when
- *     calling 'ifconfig DEV up' and enters it back on 'ifconfig DEV
- *     down'.
- *
- * @__WIMAX_ST_QUIESCING: The device is being torn down, so no API
- *     operations are allowed to proceed except the ones needed to
- *     complete the device clean up process.
- *
- * @WIMAX_ST_UNINITIALIZED: [optional] Communication with the device
- *     is setup, but the device still requires some configuration
- *     before being operational.
- *     Some WiMAX API calls might work.
- *
- * @WIMAX_ST_RADIO_OFF: The device is fully up; radio is off (wether
- *     by hardware or software switches).
- *     It is recommended to always leave the device in this state
- *     after initialization.
- *
- * @WIMAX_ST_READY: The device is fully up and radio is on.
- *
- * @WIMAX_ST_SCANNING: [optional] The device has been instructed to
- *     scan. In this state, the device cannot be actively connected to
- *     a network.
- *
- * @WIMAX_ST_CONNECTING: The device is connecting to a network. This
- *     state exists because in some devices, the connect process can
- *     include a number of negotiations between user space, kernel
- *     space and the device. User space needs to know what the device
- *     is doing. If the connect sequence in a device is atomic and
- *     fast, the device can transition directly to CONNECTED
- *
- * @WIMAX_ST_CONNECTED: The device is connected to a network.
- *
- * @__WIMAX_ST_INVALID: This is an invalid state used to mark the
- *     maximum numeric value of states.
- *
- * Description:
- *
- * Transitions from one state to another one are atomic and can only
- * be caused in kernel space with wimax_state_change(). To read the
- * state, use wimax_state_get().
- *
- * States starting with __ are internal and shall not be used or
- * referred to by drivers or userspace. They look ugly, but that's the
- * point -- if any use is made non-internal to the stack, it is easier
- * to catch on review.
- *
- * All API operations [with well defined exceptions] will take the
- * device mutex before starting and then check the state. If the state
- * is %__WIMAX_ST_NULL, %WIMAX_ST_DOWN, %WIMAX_ST_UNINITIALIZED or
- * %__WIMAX_ST_QUIESCING, it will drop the lock and quit with
- * -%EINVAL, -%ENOMEDIUM, -%ENOTCONN or -%ESHUTDOWN.
- *
- * The order of the definitions is important, so we can do numerical
- * comparisons (eg: < %WIMAX_ST_RADIO_OFF means the device is not ready
- * to operate).
- */
-/*
- * The allowed state transitions are described in the table below
- * (states in rows can go to states in columns where there is an X):
- *
- *                                  UNINI   RADIO READY SCAN CONNEC CONNEC
- *             NULL DOWN QUIESCING TIALIZED  OFF        NING  TING   TED
- * NULL         -    x
- * DOWN              -      x        x       x
- * QUIESCING         x      -
- * UNINITIALIZED            x        -       x
- * RADIO_OFF                x                -     x
- * READY                    x                x     -     x     x      x
- * SCANNING                 x                x     x     -     x      x
- * CONNECTING               x                x     x     x     -      x
- * CONNECTED                x                x     x                  -
- *
- * This table not available in kernel-doc because the formatting messes it up.
- */
- enum wimax_st {
-	__WIMAX_ST_NULL = 0,
-	WIMAX_ST_DOWN,
-	__WIMAX_ST_QUIESCING,
-	WIMAX_ST_UNINITIALIZED,
-	WIMAX_ST_RADIO_OFF,
-	WIMAX_ST_READY,
-	WIMAX_ST_SCANNING,
-	WIMAX_ST_CONNECTING,
-	WIMAX_ST_CONNECTED,
-	__WIMAX_ST_INVALID			/* Always keep last */
-};
-
-
-#endif /* #ifndef __LINUX__WIMAX_H__ */
diff --git a/ANDROID_3.4.5/include/linux/wimax/Kbuild b/ANDROID_3.4.5/include/linux/wimax/Kbuild
deleted file mode 100644
index 3cb4f269..00000000
--- a/ANDROID_3.4.5/include/linux/wimax/Kbuild
+++ /dev/null
@@ -1 +0,0 @@
-header-y += i2400m.h
diff --git a/ANDROID_3.4.5/include/linux/wimax/debug.h b/ANDROID_3.4.5/include/linux/wimax/debug.h
deleted file mode 100644
index aaf24ba1..00000000
--- a/ANDROID_3.4.5/include/linux/wimax/debug.h
+++ /dev/null
@@ -1,526 +0,0 @@
-/*
- * Linux WiMAX
- * Collection of tools to manage debug operations.
- *
- *
- * Copyright (C) 2005-2007 Intel Corporation
- * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version
- * 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA.
- *
- *
- * Don't #include this file directly, read on!
- *
- *
- * EXECUTING DEBUGGING ACTIONS OR NOT
- *
- * The main thing this framework provides is decission power to take a
- * debug action (like printing a message) if the current debug level
- * allows it.
- *
- * The decission power is at two levels: at compile-time (what does
- * not make it is compiled out) and at run-time. The run-time
- * selection is done per-submodule (as they are declared by the user
- * of the framework).
- *
- * A call to d_test(L) (L being the target debug level) returns true
- * if the action should be taken because the current debug levels
- * allow it (both compile and run time).
- *
- * It follows that a call to d_test() that can be determined to be
- * always false at compile time will get the code depending on it
- * compiled out by optimization.
- *
- *
- * DEBUG LEVELS
- *
- * It is up to the caller to define how much a debugging level is.
- *
- * Convention sets 0 as "no debug" (so an action marked as debug level 0
- * will always be taken). The increasing debug levels are used for
- * increased verbosity.
- *
- *
- * USAGE
- *
- * Group the code in modules and submodules inside each module [which
- * in most cases maps to Linux modules and .c files that compose
- * those].
- *
- *
- * For each module, there is:
- *
- *  - a MODULENAME (single word, legal C identifier)
- *
- *  - a debug-levels.h header file that declares the list of
- *    submodules and that is included by all .c files that use
- *    the debugging tools. The file name can be anything.
- *
- *  - some (optional) .c code to manipulate the runtime debug levels
- *    through debugfs.
- *
- * The debug-levels.h file would look like:
- *
- *     #ifndef __debug_levels__h__
- *     #define __debug_levels__h__
- *
- *     #define D_MODULENAME modulename
- *     #define D_MASTER 10
- *
- *     #include <linux/wimax/debug.h>
- *
- *     enum d_module {
- *             D_SUBMODULE_DECLARE(submodule_1),
- *             D_SUBMODULE_DECLARE(submodule_2),
- *             ...
- *             D_SUBMODULE_DECLARE(submodule_N)
- *     };
- *
- *     #endif
- *
- * D_MASTER is the maximum compile-time debug level; any debug actions
- * above this will be out. D_MODULENAME is the module name (legal C
- * identifier), which has to be unique for each module (to avoid
- * namespace collisions during linkage). Note those #defines need to
- * be done before #including debug.h
- *
- * We declare N different submodules whose debug level can be
- * independently controlled during runtime.
- *
- * In a .c file of the module (and only in one of them), define the
- * following code:
- *
- *     struct d_level D_LEVEL[] = {
- *             D_SUBMODULE_DEFINE(submodule_1),
- *             D_SUBMODULE_DEFINE(submodule_2),
- *             ...
- *             D_SUBMODULE_DEFINE(submodule_N),
- *     };
- *     size_t D_LEVEL_SIZE = ARRAY_SIZE(D_LEVEL);
- *
- * Externs for d_level_MODULENAME and d_level_size_MODULENAME are used
- * and declared in this file using the D_LEVEL and D_LEVEL_SIZE macros
- * #defined also in this file.
- *
- * To manipulate from user space the levels, create a debugfs dentry
- * and then register each submodule with:
- *
- *     result = d_level_register_debugfs("PREFIX_", submodule_X, parent);
- *     if (result < 0)
- *            goto error;
- *
- * Where PREFIX_ is a name of your chosing. This will create debugfs
- * file with a single numeric value that can be use to tweak it. To
- * remove the entires, just use debugfs_remove_recursive() on 'parent'.
- *
- * NOTE: remember that even if this will show attached to some
- *     particular instance of a device, the settings are *global*.
- *
- *
- * On each submodule (for example, .c files), the debug infrastructure
- * should be included like this:
- *
- *     #define D_SUBMODULE submodule_x     // matches one in debug-levels.h
- *     #include "debug-levels.h"
- *
- * after #including all your include files.
- *
- *
- * Now you can use the d_*() macros below [d_test(), d_fnstart(),
- * d_fnend(), d_printf(), d_dump()].
- *
- * If their debug level is greater than D_MASTER, they will be
- * compiled out.
- *
- * If their debug level is lower or equal than D_MASTER but greater
- * than the current debug level of their submodule, they'll be
- * ignored.
- *
- * Otherwise, the action will be performed.
- */
-#ifndef __debug__h__
-#define __debug__h__
-
-#include <linux/types.h>
-#include <linux/slab.h>
-
-struct device;
-
-/* Backend stuff */
-
-/*
- * Debug backend: generate a message header from a 'struct device'
- *
- * @head: buffer where to place the header
- * @head_size: length of @head
- * @dev: pointer to device used to generate a header from. If NULL,
- *     an empty ("") header is generated.
- */
-static inline
-void __d_head(char *head, size_t head_size,
-	      struct device *dev)
-{
-	if (dev == NULL)
-		head[0] = 0;
-	else if ((unsigned long)dev < 4096) {
-		printk(KERN_ERR "E: Corrupt dev %p\n", dev);
-		WARN_ON(1);
-	} else
-		snprintf(head, head_size, "%s %s: ",
-			 dev_driver_string(dev), dev_name(dev));
-}
-
-
-/*
- * Debug backend: log some message if debugging is enabled
- *
- * @l: intended debug level
- * @tag: tag to prefix the message with
- * @dev: 'struct device' associated to this message
- * @f: printf-like format and arguments
- *
- * Note this is optimized out if it doesn't pass the compile-time
- * check; however, it is *always* compiled. This is useful to make
- * sure the printf-like formats and variables are always checked and
- * they don't get bit rot if you have all the debugging disabled.
- */
-#define _d_printf(l, tag, dev, f, a...)					\
-do {									\
-	char head[64];							\
-	if (!d_test(l))							\
-		break;							\
-	__d_head(head, sizeof(head), dev);				\
-	printk(KERN_ERR "%s%s%s: " f, head, __func__, tag, ##a);	\
-} while (0)
-
-
-/*
- * CPP sintatic sugar to generate A_B like symbol names when one of
- * the arguments is a a preprocessor #define.
- */
-#define __D_PASTE__(varname, modulename) varname##_##modulename
-#define __D_PASTE(varname, modulename) (__D_PASTE__(varname, modulename))
-#define _D_SUBMODULE_INDEX(_name) (D_SUBMODULE_DECLARE(_name))
-
-
-/*
- * Store a submodule's runtime debug level and name
- */
-struct d_level {
-	u8 level;
-	const char *name;
-};
-
-
-/*
- * List of available submodules and their debug levels
- *
- * We call them d_level_MODULENAME and d_level_size_MODULENAME; the
- * macros D_LEVEL and D_LEVEL_SIZE contain the name already for
- * convenience.
- *
- * This array and the size are defined on some .c file that is part of
- * the current module.
- */
-#define D_LEVEL __D_PASTE(d_level, D_MODULENAME)
-#define D_LEVEL_SIZE __D_PASTE(d_level_size, D_MODULENAME)
-
-extern struct d_level D_LEVEL[];
-extern size_t D_LEVEL_SIZE;
-
-
-/*
- * Frontend stuff
- *
- *
- * Stuff you need to declare prior to using the actual "debug" actions
- * (defined below).
- */
-
-#ifndef D_MODULENAME
-#error D_MODULENAME is not defined in your debug-levels.h file
-/**
- * D_MODULE - Name of the current module
- *
- * #define in your module's debug-levels.h, making sure it is
- * unique. This has to be a legal C identifier.
- */
-#define D_MODULENAME undefined_modulename
-#endif
-
-
-#ifndef D_MASTER
-#warning D_MASTER not defined, but debug.h included! [see docs]
-/**
- * D_MASTER - Compile time maximum debug level
- *
- * #define in your debug-levels.h file to the maximum debug level the
- * runtime code will be allowed to have. This allows you to provide a
- * main knob.
- *
- * Anything above that level will be optimized out of the compile.
- *
- * Defaults to zero (no debug code compiled in).
- *
- * Maximum one definition per module (at the debug-levels.h file).
- */
-#define D_MASTER 0
-#endif
-
-#ifndef D_SUBMODULE
-#error D_SUBMODULE not defined, but debug.h included! [see docs]
-/**
- * D_SUBMODULE - Name of the current submodule
- *
- * #define in your submodule .c file before #including debug-levels.h
- * to the name of the current submodule as previously declared and
- * defined with D_SUBMODULE_DECLARE() (in your module's
- * debug-levels.h) and D_SUBMODULE_DEFINE().
- *
- * This is used to provide runtime-control over the debug levels.
- *
- * Maximum one per .c file! Can be shared among different .c files
- * (meaning they belong to the same submodule categorization).
- */
-#define D_SUBMODULE undefined_module
-#endif
-
-
-/**
- * D_SUBMODULE_DECLARE - Declare a submodule for runtime debug level control
- *
- * @_name: name of the submodule, restricted to the chars that make up a
- *     valid C identifier ([a-zA-Z0-9_]).
- *
- * Declare in the module's debug-levels.h header file as:
- *
- * enum d_module {
- *         D_SUBMODULE_DECLARE(submodule_1),
- *         D_SUBMODULE_DECLARE(submodule_2),
- *         D_SUBMODULE_DECLARE(submodule_3),
- * };
- *
- * Some corresponding .c file needs to have a matching
- * D_SUBMODULE_DEFINE().
- */
-#define D_SUBMODULE_DECLARE(_name) __D_SUBMODULE_##_name
-
-
-/**
- * D_SUBMODULE_DEFINE - Define a submodule for runtime debug level control
- *
- * @_name: name of the submodule, restricted to the chars that make up a
- *     valid C identifier ([a-zA-Z0-9_]).
- *
- * Use once per module (in some .c file) as:
- *
- * static
- * struct d_level d_level_SUBMODULENAME[] = {
- *         D_SUBMODULE_DEFINE(submodule_1),
- *         D_SUBMODULE_DEFINE(submodule_2),
- *         D_SUBMODULE_DEFINE(submodule_3),
- * };
- * size_t d_level_size_SUBDMODULENAME = ARRAY_SIZE(d_level_SUBDMODULENAME);
- *
- * Matching D_SUBMODULE_DECLARE()s have to be present in a
- * debug-levels.h header file.
- */
-#define D_SUBMODULE_DEFINE(_name)		\
-[__D_SUBMODULE_##_name] = {			\
-	.level = 0,				\
-	.name = #_name				\
-}
-
-
-
-/* The actual "debug" operations */
-
-
-/**
- * d_test - Returns true if debugging should be enabled
- *
- * @l: intended debug level (unsigned)
- *
- * If the master debug switch is enabled and the current settings are
- * higher or equal to the requested level, then debugging
- * output/actions should be enabled.
- *
- * NOTE:
- *
- * This needs to be coded so that it can be evaluated in compile
- * time; this is why the ugly BUG_ON() is placed in there, so the
- * D_MASTER evaluation compiles all out if it is compile-time false.
- */
-#define d_test(l)							\
-({									\
-	unsigned __l = l;	/* type enforcer */			\
-	(D_MASTER) >= __l						\
-	&& ({								\
-		BUG_ON(_D_SUBMODULE_INDEX(D_SUBMODULE) >= D_LEVEL_SIZE);\
-		D_LEVEL[_D_SUBMODULE_INDEX(D_SUBMODULE)].level >= __l;	\
-	});								\
-})
-
-
-/**
- * d_fnstart - log message at function start if debugging enabled
- *
- * @l: intended debug level
- * @_dev: 'struct device' pointer, NULL if none (for context)
- * @f: printf-like format and arguments
- */
-#define d_fnstart(l, _dev, f, a...) _d_printf(l, " FNSTART", _dev, f, ## a)
-
-
-/**
- * d_fnend - log message at function end if debugging enabled
- *
- * @l: intended debug level
- * @_dev: 'struct device' pointer, NULL if none (for context)
- * @f: printf-like format and arguments
- */
-#define d_fnend(l, _dev, f, a...) _d_printf(l, " FNEND", _dev, f, ## a)
-
-
-/**
- * d_printf - log message if debugging enabled
- *
- * @l: intended debug level
- * @_dev: 'struct device' pointer, NULL if none (for context)
- * @f: printf-like format and arguments
- */
-#define d_printf(l, _dev, f, a...) _d_printf(l, "", _dev, f, ## a)
-
-
-/**
- * d_dump - log buffer hex dump if debugging enabled
- *
- * @l: intended debug level
- * @_dev: 'struct device' pointer, NULL if none (for context)
- * @f: printf-like format and arguments
- */
-#define d_dump(l, dev, ptr, size)			\
-do {							\
-	char head[64];					\
-	if (!d_test(l))					\
-		break;					\
-	__d_head(head, sizeof(head), dev);		\
-	print_hex_dump(KERN_ERR, head, 0, 16, 1,	\
-		       ((void *) ptr), (size), 0);	\
-} while (0)
-
-
-/**
- * Export a submodule's debug level over debugfs as PREFIXSUBMODULE
- *
- * @prefix: string to prefix the name with
- * @submodule: name of submodule (not a string, just the name)
- * @dentry: debugfs parent dentry
- *
- * Returns: 0 if ok, < 0 errno on error.
- *
- * For removing, just use debugfs_remove_recursive() on the parent.
- */
-#define d_level_register_debugfs(prefix, name, parent)			\
-({									\
-	int rc;								\
-	struct dentry *fd;						\
-	struct dentry *verify_parent_type = parent;			\
-	fd = debugfs_create_u8(						\
-		prefix #name, 0600, verify_parent_type,			\
-		&(D_LEVEL[__D_SUBMODULE_ ## name].level));		\
-	rc = PTR_ERR(fd);						\
-	if (IS_ERR(fd) && rc != -ENODEV)				\
-		printk(KERN_ERR "%s: Can't create debugfs entry %s: "	\
-		       "%d\n", __func__, prefix #name, rc);		\
-	else								\
-		rc = 0;							\
-	rc;								\
-})
-
-
-static inline
-void d_submodule_set(struct d_level *d_level, size_t d_level_size,
-		     const char *submodule, u8 level, const char *tag)
-{
-	struct d_level *itr, *top;
-	int index = -1;
-
-	for (itr = d_level, top = itr + d_level_size; itr < top; itr++) {
-		index++;
-		if (itr->name == NULL) {
-			printk(KERN_ERR "%s: itr->name NULL?? (%p, #%d)\n",
-			       tag, itr, index);
-			continue;
-		}
-		if (!strcmp(itr->name, submodule)) {
-			itr->level = level;
-			return;
-		}
-	}
-	printk(KERN_ERR "%s: unknown submodule %s\n", tag, submodule);
-}
-
-
-/**
- * d_parse_params - Parse a string with debug parameters from the
- * command line
- *
- * @d_level: level structure (D_LEVEL)
- * @d_level_size: number of items in the level structure
- *     (D_LEVEL_SIZE).
- * @_params: string with the parameters; this is a space (not tab!)
- *     separated list of NAME:VALUE, where value is the debug level
- *     and NAME is the name of the submodule.
- * @tag: string for error messages (example: MODULE.ARGNAME).
- */
-static inline
-void d_parse_params(struct d_level *d_level, size_t d_level_size,
-		    const char *_params, const char *tag)
-{
-	char submodule[130], *params, *params_orig, *token, *colon;
-	unsigned level, tokens;
-
-	if (_params == NULL)
-		return;
-	params_orig = kstrdup(_params, GFP_KERNEL);
-	params = params_orig;
-	while (1) {
-		token = strsep(&params, " ");
-		if (token == NULL)
-			break;
-		if (*token == '\0')	/* eat joint spaces */
-			continue;
-		/* kernel's sscanf %s eats until whitespace, so we
-		 * replace : by \n so it doesn't get eaten later by
-		 * strsep */
-		colon = strchr(token, ':');
-		if (colon != NULL)
-			*colon = '\n';
-		tokens = sscanf(token, "%s\n%u", submodule, &level);
-		if (colon != NULL)
-			*colon = ':';	/* set back, for error messages */
-		if (tokens == 2)
-			d_submodule_set(d_level, d_level_size,
-					submodule, level, tag);
-		else
-			printk(KERN_ERR "%s: can't parse '%s' as a "
-			       "SUBMODULE:LEVEL (%d tokens)\n",
-			       tag, token, tokens);
-	}
-	kfree(params_orig);
-}
-
-#endif /* #ifndef __debug__h__ */
diff --git a/ANDROID_3.4.5/include/linux/wimax/i2400m.h b/ANDROID_3.4.5/include/linux/wimax/i2400m.h
deleted file mode 100644
index 62d35615..00000000
--- a/ANDROID_3.4.5/include/linux/wimax/i2400m.h
+++ /dev/null
@@ -1,572 +0,0 @@
-/*
- * Intel Wireless WiMax Connection 2400m
- * Host-Device protocol interface definitions
- *
- *
- * Copyright (C) 2007-2008 Intel Corporation. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- *   * Redistributions of source code must retain the above copyright
- *     notice, this list of conditions and the following disclaimer.
- *   * Redistributions in binary form must reproduce the above copyright
- *     notice, this list of conditions and the following disclaimer in
- *     the documentation and/or other materials provided with the
- *     distribution.
- *   * Neither the name of Intel Corporation nor the names of its
- *     contributors may be used to endorse or promote products derived
- *     from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *
- * Intel Corporation <linux-wimax@intel.com>
- * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
- *  - Initial implementation
- *
- *
- * This header defines the data structures and constants used to
- * communicate with the device.
- *
- * BOOTMODE/BOOTROM/FIRMWARE UPLOAD PROTOCOL
- *
- * The firmware upload protocol is quite simple and only requires a
- * handful of commands. See drivers/net/wimax/i2400m/fw.c for more
- * details.
- *
- * The BCF data structure is for the firmware file header.
- *
- *
- * THE DATA / CONTROL PROTOCOL
- *
- * This is the normal protocol spoken with the device once the
- * firmware is uploaded. It transports data payloads and control
- * messages back and forth.
- *
- * It consists 'messages' that pack one or more payloads each. The
- * format is described in detail in drivers/net/wimax/i2400m/rx.c and
- * tx.c.
- *
- *
- * THE L3L4 PROTOCOL
- *
- * The term L3L4 refers to Layer 3 (the device), Layer 4 (the
- * driver/host software).
- *
- * This is the control protocol used by the host to control the i2400m
- * device (scan, connect, disconnect...). This is sent to / received
- * as control frames. These frames consist of a header and zero or
- * more TLVs with information. We call each control frame a "message".
- *
- * Each message is composed of:
- *
- * HEADER
- * [TLV0 + PAYLOAD0]
- * [TLV1 + PAYLOAD1]
- * [...]
- * [TLVN + PAYLOADN]
- *
- * The HEADER is defined by 'struct i2400m_l3l4_hdr'. The payloads are
- * defined by a TLV structure (Type Length Value) which is a 'header'
- * (struct i2400m_tlv_hdr) and then the payload.
- *
- * All integers are represented as Little Endian.
- *
- * - REQUESTS AND EVENTS
- *
- * The requests can be clasified as follows:
- *
- *   COMMAND:  implies a request from the host to the device requesting
- *             an action being performed. The device will reply with a
- *             message (with the same type as the command), status and
- *             no (TLV) payload. Execution of a command might cause
- *             events (of different type) to be sent later on as
- *             device's state changes.
- *
- *   GET/SET:  similar to COMMAND, but will not cause other
- *             EVENTs. The reply, in the case of GET, will contain
- *             TLVs with the requested information.
- *
- *   EVENT:    asynchronous messages sent from the device, maybe as a
- *             consequence of previous COMMANDs but disassociated from
- *             them.
- *
- * Only one request might be pending at the same time (ie: don't
- * parallelize nor post another GET request before the previous
- * COMMAND has been acknowledged with it's corresponding reply by the
- * device).
- *
- * The different requests and their formats are described below:
- *
- *  I2400M_MT_*   Message types
- *  I2400M_MS_*   Message status (for replies, events)
- *  i2400m_tlv_*  TLVs
- *
- * data types are named 'struct i2400m_msg_OPNAME', OPNAME matching the
- * operation.
- */
-
-#ifndef __LINUX__WIMAX__I2400M_H__
-#define __LINUX__WIMAX__I2400M_H__
-
-#include <linux/types.h>
-
-
-/*
- * Host Device Interface (HDI) common to all busses
- */
-
-/* Boot-mode (firmware upload mode) commands */
-
-/* Header for the firmware file */
-struct i2400m_bcf_hdr {
-	__le32 module_type;
-	__le32 header_len;
-	__le32 header_version;
-	__le32 module_id;
-	__le32 module_vendor;
-	__le32 date;		/* BCD YYYMMDD */
-	__le32 size;            /* in dwords */
-	__le32 key_size;	/* in dwords */
-	__le32 modulus_size;	/* in dwords */
-	__le32 exponent_size;	/* in dwords */
-	__u8 reserved[88];
-} __attribute__ ((packed));
-
-/* Boot mode opcodes */
-enum i2400m_brh_opcode {
-	I2400M_BRH_READ = 1,
-	I2400M_BRH_WRITE = 2,
-	I2400M_BRH_JUMP = 3,
-	I2400M_BRH_SIGNED_JUMP = 8,
-	I2400M_BRH_HASH_PAYLOAD_ONLY = 9,
-};
-
-/* Boot mode command masks and stuff */
-enum i2400m_brh {
-	I2400M_BRH_SIGNATURE = 0xcbbc0000,
-	I2400M_BRH_SIGNATURE_MASK = 0xffff0000,
-	I2400M_BRH_SIGNATURE_SHIFT = 16,
-	I2400M_BRH_OPCODE_MASK = 0x0000000f,
-	I2400M_BRH_RESPONSE_MASK = 0x000000f0,
-	I2400M_BRH_RESPONSE_SHIFT = 4,
-	I2400M_BRH_DIRECT_ACCESS = 0x00000400,
-	I2400M_BRH_RESPONSE_REQUIRED = 0x00000200,
-	I2400M_BRH_USE_CHECKSUM = 0x00000100,
-};
-
-
-/**
- * i2400m_bootrom_header - Header for a boot-mode command
- *
- * @cmd: the above command descriptor
- * @target_addr: where on the device memory should the action be performed.
- * @data_size: for read/write, amount of data to be read/written
- * @block_checksum: checksum value (if applicable)
- * @payload: the beginning of data attached to this header
- */
-struct i2400m_bootrom_header {
-	__le32 command;		/* Compose with enum i2400_brh */
-	__le32 target_addr;
-	__le32 data_size;
-	__le32 block_checksum;
-	char payload[0];
-} __attribute__ ((packed));
-
-
-/*
- * Data / control protocol
- */
-
-/* Packet types for the host-device interface */
-enum i2400m_pt {
-	I2400M_PT_DATA = 0,
-	I2400M_PT_CTRL,
-	I2400M_PT_TRACE,	/* For device debug */
-	I2400M_PT_RESET_WARM,	/* device reset */
-	I2400M_PT_RESET_COLD,	/* USB[transport] reset, like reconnect */
-	I2400M_PT_EDATA,	/* Extended RX data */
-	I2400M_PT_ILLEGAL
-};
-
-
-/*
- * Payload for a data packet
- *
- * This is prefixed to each and every outgoing DATA type.
- */
-struct i2400m_pl_data_hdr {
-	__le32 reserved;
-} __attribute__((packed));
-
-
-/*
- * Payload for an extended data packet
- *
- * New in fw v1.4
- *
- * @reorder: if this payload has to be reorder or not (and how)
- * @cs: the type of data in the packet, as defined per (802.16e
- *     T11.13.19.1). Currently only 2 (IPv4 packet) supported.
- *
- * This is prefixed to each and every INCOMING DATA packet.
- */
-struct i2400m_pl_edata_hdr {
-	__le32 reorder;		/* bits defined in i2400m_ro */
-	__u8 cs;
-	__u8 reserved[11];
-} __attribute__((packed));
-
-enum i2400m_cs {
-	I2400M_CS_IPV4_0 = 0,
-	I2400M_CS_IPV4 = 2,
-};
-
-enum i2400m_ro {
-	I2400M_RO_NEEDED     = 0x01,
-	I2400M_RO_TYPE       = 0x03,
-	I2400M_RO_TYPE_SHIFT = 1,
-	I2400M_RO_CIN        = 0x0f,
-	I2400M_RO_CIN_SHIFT  = 4,
-	I2400M_RO_FBN        = 0x07ff,
-	I2400M_RO_FBN_SHIFT  = 8,
-	I2400M_RO_SN         = 0x07ff,
-	I2400M_RO_SN_SHIFT   = 21,
-};
-
-enum i2400m_ro_type {
-	I2400M_RO_TYPE_RESET = 0,
-	I2400M_RO_TYPE_PACKET,
-	I2400M_RO_TYPE_WS,
-	I2400M_RO_TYPE_PACKET_WS,
-};
-
-
-/* Misc constants */
-enum {
-	I2400M_PL_ALIGN = 16,	/* Payload data size alignment */
-	I2400M_PL_SIZE_MAX = 0x3EFF,
-	I2400M_MAX_PLS_IN_MSG = 60,
-	/* protocol barkers: sync sequences; for notifications they
-	 * are sent in groups of four. */
-	I2400M_H2D_PREVIEW_BARKER = 0xcafe900d,
-	I2400M_COLD_RESET_BARKER = 0xc01dc01d,
-	I2400M_WARM_RESET_BARKER = 0x50f750f7,
-	I2400M_NBOOT_BARKER = 0xdeadbeef,
-	I2400M_SBOOT_BARKER = 0x0ff1c1a1,
-	I2400M_SBOOT_BARKER_6050 = 0x80000001,
-	I2400M_ACK_BARKER = 0xfeedbabe,
-	I2400M_D2H_MSG_BARKER = 0xbeefbabe,
-};
-
-
-/*
- * Hardware payload descriptor
- *
- * Bitfields encoded in a struct to enforce typing semantics.
- *
- * Look in rx.c and tx.c for a full description of the format.
- */
-struct i2400m_pld {
-	__le32 val;
-} __attribute__ ((packed));
-
-#define I2400M_PLD_SIZE_MASK 0x00003fff
-#define I2400M_PLD_TYPE_SHIFT 16
-#define I2400M_PLD_TYPE_MASK 0x000f0000
-
-/*
- * Header for a TX message or RX message
- *
- * @barker: preamble
- * @size: used for management of the FIFO queue buffer; before
- *     sending, this is converted to be a real preamble. This
- *     indicates the real size of the TX message that starts at this
- *     point. If the highest bit is set, then this message is to be
- *     skipped.
- * @sequence: sequence number of this message
- * @offset: offset where the message itself starts -- see the comments
- *     in the file header about message header and payload descriptor
- *     alignment.
- * @num_pls: number of payloads in this message
- * @padding: amount of padding bytes at the end of the message to make
- *           it be of block-size aligned
- *
- * Look in rx.c and tx.c for a full description of the format.
- */
-struct i2400m_msg_hdr {
-	union {
-		__le32 barker;
-		__u32 size;	/* same size type as barker!! */
-	};
-	union {
-		__le32 sequence;
-		__u32 offset;	/* same size type as barker!! */
-	};
-	__le16 num_pls;
-	__le16 rsv1;
-	__le16 padding;
-	__le16 rsv2;
-	struct i2400m_pld pld[0];
-} __attribute__ ((packed));
-
-
-
-/*
- * L3/L4 control protocol
- */
-
-enum {
-	/* Interface version */
-	I2400M_L3L4_VERSION             = 0x0100,
-};
-
-/* Message types */
-enum i2400m_mt {
-	I2400M_MT_RESERVED              = 0x0000,
-	I2400M_MT_INVALID               = 0xffff,
-	I2400M_MT_REPORT_MASK		= 0x8000,
-
-	I2400M_MT_GET_SCAN_RESULT  	= 0x4202,
-	I2400M_MT_SET_SCAN_PARAM   	= 0x4402,
-	I2400M_MT_CMD_RF_CONTROL   	= 0x4602,
-	I2400M_MT_CMD_SCAN         	= 0x4603,
-	I2400M_MT_CMD_CONNECT      	= 0x4604,
-	I2400M_MT_CMD_DISCONNECT   	= 0x4605,
-	I2400M_MT_CMD_EXIT_IDLE   	= 0x4606,
-	I2400M_MT_GET_LM_VERSION   	= 0x5201,
-	I2400M_MT_GET_DEVICE_INFO  	= 0x5202,
-	I2400M_MT_GET_LINK_STATUS  	= 0x5203,
-	I2400M_MT_GET_STATISTICS   	= 0x5204,
-	I2400M_MT_GET_STATE        	= 0x5205,
-	I2400M_MT_GET_MEDIA_STATUS	= 0x5206,
-	I2400M_MT_SET_INIT_CONFIG	= 0x5404,
-	I2400M_MT_CMD_INIT	        = 0x5601,
-	I2400M_MT_CMD_TERMINATE		= 0x5602,
-	I2400M_MT_CMD_MODE_OF_OP	= 0x5603,
-	I2400M_MT_CMD_RESET_DEVICE	= 0x5604,
-	I2400M_MT_CMD_MONITOR_CONTROL   = 0x5605,
-	I2400M_MT_CMD_ENTER_POWERSAVE   = 0x5606,
-	I2400M_MT_GET_TLS_OPERATION_RESULT = 0x6201,
-	I2400M_MT_SET_EAP_SUCCESS       = 0x6402,
-	I2400M_MT_SET_EAP_FAIL          = 0x6403,
-	I2400M_MT_SET_EAP_KEY          	= 0x6404,
-	I2400M_MT_CMD_SEND_EAP_RESPONSE = 0x6602,
-	I2400M_MT_REPORT_SCAN_RESULT    = 0xc002,
-	I2400M_MT_REPORT_STATE		= 0xd002,
-	I2400M_MT_REPORT_POWERSAVE_READY = 0xd005,
-	I2400M_MT_REPORT_EAP_REQUEST    = 0xe002,
-	I2400M_MT_REPORT_EAP_RESTART    = 0xe003,
-	I2400M_MT_REPORT_ALT_ACCEPT    	= 0xe004,
-	I2400M_MT_REPORT_KEY_REQUEST 	= 0xe005,
-};
-
-
-/*
- * Message Ack Status codes
- *
- * When a message is replied-to, this status is reported.
- */
-enum i2400m_ms {
-	I2400M_MS_DONE_OK                  = 0,
-	I2400M_MS_DONE_IN_PROGRESS         = 1,
-	I2400M_MS_INVALID_OP               = 2,
-	I2400M_MS_BAD_STATE                = 3,
-	I2400M_MS_ILLEGAL_VALUE            = 4,
-	I2400M_MS_MISSING_PARAMS           = 5,
-	I2400M_MS_VERSION_ERROR            = 6,
-	I2400M_MS_ACCESSIBILITY_ERROR      = 7,
-	I2400M_MS_BUSY                     = 8,
-	I2400M_MS_CORRUPTED_TLV            = 9,
-	I2400M_MS_UNINITIALIZED            = 10,
-	I2400M_MS_UNKNOWN_ERROR            = 11,
-	I2400M_MS_PRODUCTION_ERROR         = 12,
-	I2400M_MS_NO_RF                    = 13,
-	I2400M_MS_NOT_READY_FOR_POWERSAVE  = 14,
-	I2400M_MS_THERMAL_CRITICAL         = 15,
-	I2400M_MS_MAX
-};
-
-
-/**
- * i2400m_tlv - enumeration of the different types of TLVs
- *
- * TLVs stand for type-length-value and are the header for a payload
- * composed of almost anything. Each payload has a type assigned
- * and a length.
- */
-enum i2400m_tlv {
-	I2400M_TLV_L4_MESSAGE_VERSIONS = 129,
-	I2400M_TLV_SYSTEM_STATE = 141,
-	I2400M_TLV_MEDIA_STATUS = 161,
-	I2400M_TLV_RF_OPERATION = 162,
-	I2400M_TLV_RF_STATUS = 163,
-	I2400M_TLV_DEVICE_RESET_TYPE = 132,
-	I2400M_TLV_CONFIG_IDLE_PARAMETERS = 601,
-	I2400M_TLV_CONFIG_IDLE_TIMEOUT = 611,
-	I2400M_TLV_CONFIG_D2H_DATA_FORMAT = 614,
-	I2400M_TLV_CONFIG_DL_HOST_REORDER = 615,
-};
-
-
-struct i2400m_tlv_hdr {
-	__le16 type;
-	__le16 length;		/* payload's */
-	__u8   pl[0];
-} __attribute__((packed));
-
-
-struct i2400m_l3l4_hdr {
-	__le16 type;
-	__le16 length;		/* payload's */
-	__le16 version;
-	__le16 resv1;
-	__le16 status;
-	__le16 resv2;
-	struct i2400m_tlv_hdr pl[0];
-} __attribute__((packed));
-
-
-/**
- * i2400m_system_state - different states of the device
- */
-enum i2400m_system_state {
-	I2400M_SS_UNINITIALIZED = 1,
-	I2400M_SS_INIT,
-	I2400M_SS_READY,
-	I2400M_SS_SCAN,
-	I2400M_SS_STANDBY,
-	I2400M_SS_CONNECTING,
-	I2400M_SS_WIMAX_CONNECTED,
-	I2400M_SS_DATA_PATH_CONNECTED,
-	I2400M_SS_IDLE,
-	I2400M_SS_DISCONNECTING,
-	I2400M_SS_OUT_OF_ZONE,
-	I2400M_SS_SLEEPACTIVE,
-	I2400M_SS_PRODUCTION,
-	I2400M_SS_CONFIG,
-	I2400M_SS_RF_OFF,
-	I2400M_SS_RF_SHUTDOWN,
-	I2400M_SS_DEVICE_DISCONNECT,
-	I2400M_SS_MAX,
-};
-
-
-/**
- * i2400m_tlv_system_state - report on the state of the system
- *
- * @state: see enum i2400m_system_state
- */
-struct i2400m_tlv_system_state {
-	struct i2400m_tlv_hdr hdr;
-	__le32 state;
-} __attribute__((packed));
-
-
-struct i2400m_tlv_l4_message_versions {
-	struct i2400m_tlv_hdr hdr;
-	__le16 major;
-	__le16 minor;
-	__le16 branch;
-	__le16 reserved;
-} __attribute__((packed));
-
-
-struct i2400m_tlv_detailed_device_info {
-	struct i2400m_tlv_hdr hdr;
-	__u8 reserved1[400];
-	__u8 mac_address[6];
-	__u8 reserved2[2];
-} __attribute__((packed));
-
-
-enum i2400m_rf_switch_status {
-	I2400M_RF_SWITCH_ON = 1,
-	I2400M_RF_SWITCH_OFF = 2,
-};
-
-struct i2400m_tlv_rf_switches_status {
-	struct i2400m_tlv_hdr hdr;
-	__u8 sw_rf_switch;	/* 1 ON, 2 OFF */
-	__u8 hw_rf_switch;	/* 1 ON, 2 OFF */
-	__u8 reserved[2];
-} __attribute__((packed));
-
-
-enum {
-	i2400m_rf_operation_on = 1,
-	i2400m_rf_operation_off = 2
-};
-
-struct i2400m_tlv_rf_operation {
-	struct i2400m_tlv_hdr hdr;
-	__le32 status;	/* 1 ON, 2 OFF */
-} __attribute__((packed));
-
-
-enum i2400m_tlv_reset_type {
-	I2400M_RESET_TYPE_COLD = 1,
-	I2400M_RESET_TYPE_WARM
-};
-
-struct i2400m_tlv_device_reset_type {
-	struct i2400m_tlv_hdr hdr;
-	__le32 reset_type;
-} __attribute__((packed));
-
-
-struct i2400m_tlv_config_idle_parameters {
-	struct i2400m_tlv_hdr hdr;
-	__le32 idle_timeout;	/* 100 to 300000 ms [5min], 100 increments
-				 * 0 disabled */
-	__le32 idle_paging_interval;	/* frames */
-} __attribute__((packed));
-
-
-enum i2400m_media_status {
-	I2400M_MEDIA_STATUS_LINK_UP = 1,
-	I2400M_MEDIA_STATUS_LINK_DOWN,
-	I2400M_MEDIA_STATUS_LINK_RENEW,
-};
-
-struct i2400m_tlv_media_status {
-	struct i2400m_tlv_hdr hdr;
-	__le32 media_status;
-} __attribute__((packed));
-
-
-/* New in v1.4 */
-struct i2400m_tlv_config_idle_timeout {
-	struct i2400m_tlv_hdr hdr;
-	__le32 timeout;	/* 100 to 300000 ms [5min], 100 increments
-			 * 0 disabled */
-} __attribute__((packed));
-
-/* New in v1.4 -- for backward compat, will be removed */
-struct i2400m_tlv_config_d2h_data_format {
-	struct i2400m_tlv_hdr hdr;
-	__u8 format; 		/* 0 old format, 1 enhanced */
-	__u8 reserved[3];
-} __attribute__((packed));
-
-/* New in v1.4 */
-struct i2400m_tlv_config_dl_host_reorder {
-	struct i2400m_tlv_hdr hdr;
-	__u8 reorder; 		/* 0 disabled, 1 enabled */
-	__u8 reserved[3];
-} __attribute__((packed));
-
-
-#endif /* #ifndef __LINUX__WIMAX__I2400M_H__ */
diff --git a/ANDROID_3.4.5/include/linux/wireless.h b/ANDROID_3.4.5/include/linux/wireless.h
deleted file mode 100644
index 4395b28b..00000000
--- a/ANDROID_3.4.5/include/linux/wireless.h
+++ /dev/null
@@ -1,1162 +0,0 @@
-/*
- * This file define a set of standard wireless extensions
- *
- * Version :	22	16.3.07
- *
- * Authors :	Jean Tourrilhes - HPL - <jt@hpl.hp.com>
- * Copyright (c) 1997-2007 Jean Tourrilhes, All Rights Reserved.
- */
-
-#ifndef _LINUX_WIRELESS_H
-#define _LINUX_WIRELESS_H
-
-/************************** DOCUMENTATION **************************/
-/*
- * Initial APIs (1996 -> onward) :
- * -----------------------------
- * Basically, the wireless extensions are for now a set of standard ioctl
- * call + /proc/net/wireless
- *
- * The entry /proc/net/wireless give statistics and information on the
- * driver.
- * This is better than having each driver having its entry because
- * its centralised and we may remove the driver module safely.
- *
- * Ioctl are used to configure the driver and issue commands.  This is
- * better than command line options of insmod because we may want to
- * change dynamically (while the driver is running) some parameters.
- *
- * The ioctl mechanimsm are copied from standard devices ioctl.
- * We have the list of command plus a structure descibing the
- * data exchanged...
- * Note that to add these ioctl, I was obliged to modify :
- *	# net/core/dev.c (two place + add include)
- *	# net/ipv4/af_inet.c (one place + add include)
- *
- * /proc/net/wireless is a copy of /proc/net/dev.
- * We have a structure for data passed from the driver to /proc/net/wireless
- * Too add this, I've modified :
- *	# net/core/dev.c (two other places)
- *	# include/linux/netdevice.h (one place)
- *	# include/linux/proc_fs.h (one place)
- *
- * New driver API (2002 -> onward) :
- * -------------------------------
- * This file is only concerned with the user space API and common definitions.
- * The new driver API is defined and documented in :
- *	# include/net/iw_handler.h
- *
- * Note as well that /proc/net/wireless implementation has now moved in :
- *	# net/core/wireless.c
- *
- * Wireless Events (2002 -> onward) :
- * --------------------------------
- * Events are defined at the end of this file, and implemented in :
- *	# net/core/wireless.c
- *
- * Other comments :
- * --------------
- * Do not add here things that are redundant with other mechanisms
- * (drivers init, ifconfig, /proc/net/dev, ...) and with are not
- * wireless specific.
- *
- * These wireless extensions are not magic : each driver has to provide
- * support for them...
- *
- * IMPORTANT NOTE : As everything in the kernel, this is very much a
- * work in progress. Contact me if you have ideas of improvements...
- */
-
-/***************************** INCLUDES *****************************/
-
-#include <linux/types.h>		/* for __u* and __s* typedefs */
-#include <linux/socket.h>		/* for "struct sockaddr" et al	*/
-#include <linux/if.h>			/* for IFNAMSIZ and co... */
-
-/***************************** VERSION *****************************/
-/*
- * This constant is used to know the availability of the wireless
- * extensions and to know which version of wireless extensions it is
- * (there is some stuff that will be added in the future...)
- * I just plan to increment with each new version.
- */
-#define WIRELESS_EXT	22
-
-/*
- * Changes :
- *
- * V2 to V3
- * --------
- *	Alan Cox start some incompatibles changes. I've integrated a bit more.
- *	- Encryption renamed to Encode to avoid US regulation problems
- *	- Frequency changed from float to struct to avoid problems on old 386
- *
- * V3 to V4
- * --------
- *	- Add sensitivity
- *
- * V4 to V5
- * --------
- *	- Missing encoding definitions in range
- *	- Access points stuff
- *
- * V5 to V6
- * --------
- *	- 802.11 support (ESSID ioctls)
- *
- * V6 to V7
- * --------
- *	- define IW_ESSID_MAX_SIZE and IW_MAX_AP
- *
- * V7 to V8
- * --------
- *	- Changed my e-mail address
- *	- More 802.11 support (nickname, rate, rts, frag)
- *	- List index in frequencies
- *
- * V8 to V9
- * --------
- *	- Support for 'mode of operation' (ad-hoc, managed...)
- *	- Support for unicast and multicast power saving
- *	- Change encoding to support larger tokens (>64 bits)
- *	- Updated iw_params (disable, flags) and use it for NWID
- *	- Extracted iw_point from iwreq for clarity
- *
- * V9 to V10
- * ---------
- *	- Add PM capability to range structure
- *	- Add PM modifier : MAX/MIN/RELATIVE
- *	- Add encoding option : IW_ENCODE_NOKEY
- *	- Add TxPower ioctls (work like TxRate)
- *
- * V10 to V11
- * ----------
- *	- Add WE version in range (help backward/forward compatibility)
- *	- Add retry ioctls (work like PM)
- *
- * V11 to V12
- * ----------
- *	- Add SIOCSIWSTATS to get /proc/net/wireless programatically
- *	- Add DEV PRIVATE IOCTL to avoid collisions in SIOCDEVPRIVATE space
- *	- Add new statistics (frag, retry, beacon)
- *	- Add average quality (for user space calibration)
- *
- * V12 to V13
- * ----------
- *	- Document creation of new driver API.
- *	- Extract union iwreq_data from struct iwreq (for new driver API).
- *	- Rename SIOCSIWNAME as SIOCSIWCOMMIT
- *
- * V13 to V14
- * ----------
- *	- Wireless Events support : define struct iw_event
- *	- Define additional specific event numbers
- *	- Add "addr" and "param" fields in union iwreq_data
- *	- AP scanning stuff (SIOCSIWSCAN and friends)
- *
- * V14 to V15
- * ----------
- *	- Add IW_PRIV_TYPE_ADDR for struct sockaddr private arg
- *	- Make struct iw_freq signed (both m & e), add explicit padding
- *	- Add IWEVCUSTOM for driver specific event/scanning token
- *	- Add IW_MAX_GET_SPY for driver returning a lot of addresses
- *	- Add IW_TXPOW_RANGE for range of Tx Powers
- *	- Add IWEVREGISTERED & IWEVEXPIRED events for Access Points
- *	- Add IW_MODE_MONITOR for passive monitor
- *
- * V15 to V16
- * ----------
- *	- Increase the number of bitrates in iw_range to 32 (for 802.11g)
- *	- Increase the number of frequencies in iw_range to 32 (for 802.11b+a)
- *	- Reshuffle struct iw_range for increases, add filler
- *	- Increase IW_MAX_AP to 64 for driver returning a lot of addresses
- *	- Remove IW_MAX_GET_SPY because conflict with enhanced spy support
- *	- Add SIOCSIWTHRSPY/SIOCGIWTHRSPY and "struct iw_thrspy"
- *	- Add IW_ENCODE_TEMP and iw_range->encoding_login_index
- *
- * V16 to V17
- * ----------
- *	- Add flags to frequency -> auto/fixed
- *	- Document (struct iw_quality *)->updated, add new flags (INVALID)
- *	- Wireless Event capability in struct iw_range
- *	- Add support for relative TxPower (yick !)
- *
- * V17 to V18 (From Jouni Malinen <j@w1.fi>)
- * ----------
- *	- Add support for WPA/WPA2
- *	- Add extended encoding configuration (SIOCSIWENCODEEXT and
- *	  SIOCGIWENCODEEXT)
- *	- Add SIOCSIWGENIE/SIOCGIWGENIE
- *	- Add SIOCSIWMLME
- *	- Add SIOCSIWPMKSA
- *	- Add struct iw_range bit field for supported encoding capabilities
- *	- Add optional scan request parameters for SIOCSIWSCAN
- *	- Add SIOCSIWAUTH/SIOCGIWAUTH for setting authentication and WPA
- *	  related parameters (extensible up to 4096 parameter values)
- *	- Add wireless events: IWEVGENIE, IWEVMICHAELMICFAILURE,
- *	  IWEVASSOCREQIE, IWEVASSOCRESPIE, IWEVPMKIDCAND
- *
- * V18 to V19
- * ----------
- *	- Remove (struct iw_point *)->pointer from events and streams
- *	- Remove header includes to help user space
- *	- Increase IW_ENCODING_TOKEN_MAX from 32 to 64
- *	- Add IW_QUAL_ALL_UPDATED and IW_QUAL_ALL_INVALID macros
- *	- Add explicit flag to tell stats are in dBm : IW_QUAL_DBM
- *	- Add IW_IOCTL_IDX() and IW_EVENT_IDX() macros
- *
- * V19 to V20
- * ----------
- *	- RtNetlink requests support (SET/GET)
- *
- * V20 to V21
- * ----------
- *	- Remove (struct net_device *)->get_wireless_stats()
- *	- Change length in ESSID and NICK to strlen() instead of strlen()+1
- *	- Add IW_RETRY_SHORT/IW_RETRY_LONG retry modifiers
- *	- Power/Retry relative values no longer * 100000
- *	- Add explicit flag to tell stats are in 802.11k RCPI : IW_QUAL_RCPI
- *
- * V21 to V22
- * ----------
- *	- Prevent leaking of kernel space in stream on 64 bits.
- */
-
-/**************************** CONSTANTS ****************************/
-
-/* -------------------------- IOCTL LIST -------------------------- */
-
-/* Wireless Identification */
-#define SIOCSIWCOMMIT	0x8B00		/* Commit pending changes to driver */
-#define SIOCGIWNAME	0x8B01		/* get name == wireless protocol */
-/* SIOCGIWNAME is used to verify the presence of Wireless Extensions.
- * Common values : "IEEE 802.11-DS", "IEEE 802.11-FH", "IEEE 802.11b"...
- * Don't put the name of your driver there, it's useless. */
-
-/* Basic operations */
-#define SIOCSIWNWID	0x8B02		/* set network id (pre-802.11) */
-#define SIOCGIWNWID	0x8B03		/* get network id (the cell) */
-#define SIOCSIWFREQ	0x8B04		/* set channel/frequency (Hz) */
-#define SIOCGIWFREQ	0x8B05		/* get channel/frequency (Hz) */
-#define SIOCSIWMODE	0x8B06		/* set operation mode */
-#define SIOCGIWMODE	0x8B07		/* get operation mode */
-#define SIOCSIWSENS	0x8B08		/* set sensitivity (dBm) */
-#define SIOCGIWSENS	0x8B09		/* get sensitivity (dBm) */
-
-/* Informative stuff */
-#define SIOCSIWRANGE	0x8B0A		/* Unused */
-#define SIOCGIWRANGE	0x8B0B		/* Get range of parameters */
-#define SIOCSIWPRIV	0x8B0C		/* Unused */
-#define SIOCGIWPRIV	0x8B0D		/* get private ioctl interface info */
-#define SIOCSIWSTATS	0x8B0E		/* Unused */
-#define SIOCGIWSTATS	0x8B0F		/* Get /proc/net/wireless stats */
-/* SIOCGIWSTATS is strictly used between user space and the kernel, and
- * is never passed to the driver (i.e. the driver will never see it). */
-
-/* Spy support (statistics per MAC address - used for Mobile IP support) */
-#define SIOCSIWSPY	0x8B10		/* set spy addresses */
-#define SIOCGIWSPY	0x8B11		/* get spy info (quality of link) */
-#define SIOCSIWTHRSPY	0x8B12		/* set spy threshold (spy event) */
-#define SIOCGIWTHRSPY	0x8B13		/* get spy threshold */
-
-/* Access Point manipulation */
-#define SIOCSIWAP	0x8B14		/* set access point MAC addresses */
-#define SIOCGIWAP	0x8B15		/* get access point MAC addresses */
-#define SIOCGIWAPLIST	0x8B17		/* Deprecated in favor of scanning */
-#define SIOCSIWSCAN	0x8B18		/* trigger scanning (list cells) */
-#define SIOCGIWSCAN	0x8B19		/* get scanning results */
-
-/* 802.11 specific support */
-#define SIOCSIWESSID	0x8B1A		/* set ESSID (network name) */
-#define SIOCGIWESSID	0x8B1B		/* get ESSID */
-#define SIOCSIWNICKN	0x8B1C		/* set node name/nickname */
-#define SIOCGIWNICKN	0x8B1D		/* get node name/nickname */
-/* As the ESSID and NICKN are strings up to 32 bytes long, it doesn't fit
- * within the 'iwreq' structure, so we need to use the 'data' member to
- * point to a string in user space, like it is done for RANGE... */
-
-/* Other parameters useful in 802.11 and some other devices */
-#define SIOCSIWRATE	0x8B20		/* set default bit rate (bps) */
-#define SIOCGIWRATE	0x8B21		/* get default bit rate (bps) */
-#define SIOCSIWRTS	0x8B22		/* set RTS/CTS threshold (bytes) */
-#define SIOCGIWRTS	0x8B23		/* get RTS/CTS threshold (bytes) */
-#define SIOCSIWFRAG	0x8B24		/* set fragmentation thr (bytes) */
-#define SIOCGIWFRAG	0x8B25		/* get fragmentation thr (bytes) */
-#define SIOCSIWTXPOW	0x8B26		/* set transmit power (dBm) */
-#define SIOCGIWTXPOW	0x8B27		/* get transmit power (dBm) */
-#define SIOCSIWRETRY	0x8B28		/* set retry limits and lifetime */
-#define SIOCGIWRETRY	0x8B29		/* get retry limits and lifetime */
-
-/* Encoding stuff (scrambling, hardware security, WEP...) */
-#define SIOCSIWENCODE	0x8B2A		/* set encoding token & mode */
-#define SIOCGIWENCODE	0x8B2B		/* get encoding token & mode */
-/* Power saving stuff (power management, unicast and multicast) */
-#define SIOCSIWPOWER	0x8B2C		/* set Power Management settings */
-#define SIOCGIWPOWER	0x8B2D		/* get Power Management settings */
-
-/* WPA : Generic IEEE 802.11 informatiom element (e.g., for WPA/RSN/WMM).
- * This ioctl uses struct iw_point and data buffer that includes IE id and len
- * fields. More than one IE may be included in the request. Setting the generic
- * IE to empty buffer (len=0) removes the generic IE from the driver. Drivers
- * are allowed to generate their own WPA/RSN IEs, but in these cases, drivers
- * are required to report the used IE as a wireless event, e.g., when
- * associating with an AP. */
-#define SIOCSIWGENIE	0x8B30		/* set generic IE */
-#define SIOCGIWGENIE	0x8B31		/* get generic IE */
-
-/* WPA : IEEE 802.11 MLME requests */
-#define SIOCSIWMLME	0x8B16		/* request MLME operation; uses
-					 * struct iw_mlme */
-/* WPA : Authentication mode parameters */
-#define SIOCSIWAUTH	0x8B32		/* set authentication mode params */
-#define SIOCGIWAUTH	0x8B33		/* get authentication mode params */
-
-/* WPA : Extended version of encoding configuration */
-#define SIOCSIWENCODEEXT 0x8B34		/* set encoding token & mode */
-#define SIOCGIWENCODEEXT 0x8B35		/* get encoding token & mode */
-
-/* WPA2 : PMKSA cache management */
-#define SIOCSIWPMKSA	0x8B36		/* PMKSA cache operation */
-
-/* -------------------- DEV PRIVATE IOCTL LIST -------------------- */
-
-/* These 32 ioctl are wireless device private, for 16 commands.
- * Each driver is free to use them for whatever purpose it chooses,
- * however the driver *must* export the description of those ioctls
- * with SIOCGIWPRIV and *must* use arguments as defined below.
- * If you don't follow those rules, DaveM is going to hate you (reason :
- * it make mixed 32/64bit operation impossible).
- */
-#define SIOCIWFIRSTPRIV	0x8BE0
-#define SIOCIWLASTPRIV	0x8BFF
-/* Previously, we were using SIOCDEVPRIVATE, but we now have our
- * separate range because of collisions with other tools such as
- * 'mii-tool'.
- * We now have 32 commands, so a bit more space ;-).
- * Also, all 'even' commands are only usable by root and don't return the
- * content of ifr/iwr to user (but you are not obliged to use the set/get
- * convention, just use every other two command). More details in iwpriv.c.
- * And I repeat : you are not forced to use them with iwpriv, but you
- * must be compliant with it.
- */
-
-/* ------------------------- IOCTL STUFF ------------------------- */
-
-/* The first and the last (range) */
-#define SIOCIWFIRST	0x8B00
-#define SIOCIWLAST	SIOCIWLASTPRIV		/* 0x8BFF */
-#define IW_IOCTL_IDX(cmd)	((cmd) - SIOCIWFIRST)
-#define IW_HANDLER(id, func)			\
-	[IW_IOCTL_IDX(id)] = func
-
-/* Odd : get (world access), even : set (root access) */
-#define IW_IS_SET(cmd)	(!((cmd) & 0x1))
-#define IW_IS_GET(cmd)	((cmd) & 0x1)
-
-/* ----------------------- WIRELESS EVENTS ----------------------- */
-/* Those are *NOT* ioctls, do not issue request on them !!! */
-/* Most events use the same identifier as ioctl requests */
-
-#define IWEVTXDROP	0x8C00		/* Packet dropped to excessive retry */
-#define IWEVQUAL	0x8C01		/* Quality part of statistics (scan) */
-#define IWEVCUSTOM	0x8C02		/* Driver specific ascii string */
-#define IWEVREGISTERED	0x8C03		/* Discovered a new node (AP mode) */
-#define IWEVEXPIRED	0x8C04		/* Expired a node (AP mode) */
-#define IWEVGENIE	0x8C05		/* Generic IE (WPA, RSN, WMM, ..)
-					 * (scan results); This includes id and
-					 * length fields. One IWEVGENIE may
-					 * contain more than one IE. Scan
-					 * results may contain one or more
-					 * IWEVGENIE events. */
-#define IWEVMICHAELMICFAILURE 0x8C06	/* Michael MIC failure
-					 * (struct iw_michaelmicfailure)
-					 */
-#define IWEVASSOCREQIE	0x8C07		/* IEs used in (Re)Association Request.
-					 * The data includes id and length
-					 * fields and may contain more than one
-					 * IE. This event is required in
-					 * Managed mode if the driver
-					 * generates its own WPA/RSN IE. This
-					 * should be sent just before
-					 * IWEVREGISTERED event for the
-					 * association. */
-#define IWEVASSOCRESPIE	0x8C08		/* IEs used in (Re)Association
-					 * Response. The data includes id and
-					 * length fields and may contain more
-					 * than one IE. This may be sent
-					 * between IWEVASSOCREQIE and
-					 * IWEVREGISTERED events for the
-					 * association. */
-#define IWEVPMKIDCAND	0x8C09		/* PMKID candidate for RSN
-					 * pre-authentication
-					 * (struct iw_pmkid_cand) */
-
-#define IWEVFIRST	0x8C00
-#define IW_EVENT_IDX(cmd)	((cmd) - IWEVFIRST)
-
-/* ------------------------- PRIVATE INFO ------------------------- */
-/*
- * The following is used with SIOCGIWPRIV. It allow a driver to define
- * the interface (name, type of data) for its private ioctl.
- * Privates ioctl are SIOCIWFIRSTPRIV -> SIOCIWLASTPRIV
- */
-
-#define IW_PRIV_TYPE_MASK	0x7000	/* Type of arguments */
-#define IW_PRIV_TYPE_NONE	0x0000
-#define IW_PRIV_TYPE_BYTE	0x1000	/* Char as number */
-#define IW_PRIV_TYPE_CHAR	0x2000	/* Char as character */
-#define IW_PRIV_TYPE_INT	0x4000	/* 32 bits int */
-#define IW_PRIV_TYPE_FLOAT	0x5000	/* struct iw_freq */
-#define IW_PRIV_TYPE_ADDR	0x6000	/* struct sockaddr */
-
-#define IW_PRIV_SIZE_FIXED	0x0800	/* Variable or fixed number of args */
-
-#define IW_PRIV_SIZE_MASK	0x07FF	/* Max number of those args */
-
-/*
- * Note : if the number of args is fixed and the size < 16 octets,
- * instead of passing a pointer we will put args in the iwreq struct...
- */
-
-/* ----------------------- OTHER CONSTANTS ----------------------- */
-
-/* Maximum frequencies in the range struct */
-#define IW_MAX_FREQUENCIES	32
-/* Note : if you have something like 80 frequencies,
- * don't increase this constant and don't fill the frequency list.
- * The user will be able to set by channel anyway... */
-
-/* Maximum bit rates in the range struct */
-#define IW_MAX_BITRATES		32
-
-/* Maximum tx powers in the range struct */
-#define IW_MAX_TXPOWER		8
-/* Note : if you more than 8 TXPowers, just set the max and min or
- * a few of them in the struct iw_range. */
-
-/* Maximum of address that you may set with SPY */
-#define IW_MAX_SPY		8
-
-/* Maximum of address that you may get in the
-   list of access points in range */
-#define IW_MAX_AP		64
-
-/* Maximum size of the ESSID and NICKN strings */
-#define IW_ESSID_MAX_SIZE	32
-
-/* Modes of operation */
-#define IW_MODE_AUTO	0	/* Let the driver decides */
-#define IW_MODE_ADHOC	1	/* Single cell network */
-#define IW_MODE_INFRA	2	/* Multi cell network, roaming, ... */
-#define IW_MODE_MASTER	3	/* Synchronisation master or Access Point */
-#define IW_MODE_REPEAT	4	/* Wireless Repeater (forwarder) */
-#define IW_MODE_SECOND	5	/* Secondary master/repeater (backup) */
-#define IW_MODE_MONITOR	6	/* Passive monitor (listen only) */
-#define IW_MODE_MESH	7	/* Mesh (IEEE 802.11s) network */
-
-/* Statistics flags (bitmask in updated) */
-#define IW_QUAL_QUAL_UPDATED	0x01	/* Value was updated since last read */
-#define IW_QUAL_LEVEL_UPDATED	0x02
-#define IW_QUAL_NOISE_UPDATED	0x04
-#define IW_QUAL_ALL_UPDATED	0x07
-#define IW_QUAL_DBM		0x08	/* Level + Noise are dBm */
-#define IW_QUAL_QUAL_INVALID	0x10	/* Driver doesn't provide value */
-#define IW_QUAL_LEVEL_INVALID	0x20
-#define IW_QUAL_NOISE_INVALID	0x40
-#define IW_QUAL_RCPI		0x80	/* Level + Noise are 802.11k RCPI */
-#define IW_QUAL_ALL_INVALID	0x70
-
-/* Frequency flags */
-#define IW_FREQ_AUTO		0x00	/* Let the driver decides */
-#define IW_FREQ_FIXED		0x01	/* Force a specific value */
-
-/* Maximum number of size of encoding token available
- * they are listed in the range structure */
-#define IW_MAX_ENCODING_SIZES	8
-
-/* Maximum size of the encoding token in bytes */
-#define IW_ENCODING_TOKEN_MAX	64	/* 512 bits (for now) */
-
-/* Flags for encoding (along with the token) */
-#define IW_ENCODE_INDEX		0x00FF	/* Token index (if needed) */
-#define IW_ENCODE_FLAGS		0xFF00	/* Flags defined below */
-#define IW_ENCODE_MODE		0xF000	/* Modes defined below */
-#define IW_ENCODE_DISABLED	0x8000	/* Encoding disabled */
-#define IW_ENCODE_ENABLED	0x0000	/* Encoding enabled */
-#define IW_ENCODE_RESTRICTED	0x4000	/* Refuse non-encoded packets */
-#define IW_ENCODE_OPEN		0x2000	/* Accept non-encoded packets */
-#define IW_ENCODE_NOKEY		0x0800  /* Key is write only, so not present */
-#define IW_ENCODE_TEMP		0x0400  /* Temporary key */
-
-/* Power management flags available (along with the value, if any) */
-#define IW_POWER_ON		0x0000	/* No details... */
-#define IW_POWER_TYPE		0xF000	/* Type of parameter */
-#define IW_POWER_PERIOD		0x1000	/* Value is a period/duration of  */
-#define IW_POWER_TIMEOUT	0x2000	/* Value is a timeout (to go asleep) */
-#define IW_POWER_MODE		0x0F00	/* Power Management mode */
-#define IW_POWER_UNICAST_R	0x0100	/* Receive only unicast messages */
-#define IW_POWER_MULTICAST_R	0x0200	/* Receive only multicast messages */
-#define IW_POWER_ALL_R		0x0300	/* Receive all messages though PM */
-#define IW_POWER_FORCE_S	0x0400	/* Force PM procedure for sending unicast */
-#define IW_POWER_REPEATER	0x0800	/* Repeat broadcast messages in PM period */
-#define IW_POWER_MODIFIER	0x000F	/* Modify a parameter */
-#define IW_POWER_MIN		0x0001	/* Value is a minimum  */
-#define IW_POWER_MAX		0x0002	/* Value is a maximum */
-#define IW_POWER_RELATIVE	0x0004	/* Value is not in seconds/ms/us */
-
-/* Transmit Power flags available */
-#define IW_TXPOW_TYPE		0x00FF	/* Type of value */
-#define IW_TXPOW_DBM		0x0000	/* Value is in dBm */
-#define IW_TXPOW_MWATT		0x0001	/* Value is in mW */
-#define IW_TXPOW_RELATIVE	0x0002	/* Value is in arbitrary units */
-#define IW_TXPOW_RANGE		0x1000	/* Range of value between min/max */
-
-/* Retry limits and lifetime flags available */
-#define IW_RETRY_ON		0x0000	/* No details... */
-#define IW_RETRY_TYPE		0xF000	/* Type of parameter */
-#define IW_RETRY_LIMIT		0x1000	/* Maximum number of retries*/
-#define IW_RETRY_LIFETIME	0x2000	/* Maximum duration of retries in us */
-#define IW_RETRY_MODIFIER	0x00FF	/* Modify a parameter */
-#define IW_RETRY_MIN		0x0001	/* Value is a minimum  */
-#define IW_RETRY_MAX		0x0002	/* Value is a maximum */
-#define IW_RETRY_RELATIVE	0x0004	/* Value is not in seconds/ms/us */
-#define IW_RETRY_SHORT		0x0010	/* Value is for short packets  */
-#define IW_RETRY_LONG		0x0020	/* Value is for long packets */
-
-/* Scanning request flags */
-#define IW_SCAN_DEFAULT		0x0000	/* Default scan of the driver */
-#define IW_SCAN_ALL_ESSID	0x0001	/* Scan all ESSIDs */
-#define IW_SCAN_THIS_ESSID	0x0002	/* Scan only this ESSID */
-#define IW_SCAN_ALL_FREQ	0x0004	/* Scan all Frequencies */
-#define IW_SCAN_THIS_FREQ	0x0008	/* Scan only this Frequency */
-#define IW_SCAN_ALL_MODE	0x0010	/* Scan all Modes */
-#define IW_SCAN_THIS_MODE	0x0020	/* Scan only this Mode */
-#define IW_SCAN_ALL_RATE	0x0040	/* Scan all Bit-Rates */
-#define IW_SCAN_THIS_RATE	0x0080	/* Scan only this Bit-Rate */
-/* struct iw_scan_req scan_type */
-#define IW_SCAN_TYPE_ACTIVE 0
-#define IW_SCAN_TYPE_PASSIVE 1
-/* Maximum size of returned data */
-#define IW_SCAN_MAX_DATA	4096	/* In bytes */
-
-/* Scan capability flags - in (struct iw_range *)->scan_capa */
-#define IW_SCAN_CAPA_NONE		0x00
-#define IW_SCAN_CAPA_ESSID		0x01
-#define IW_SCAN_CAPA_BSSID		0x02
-#define IW_SCAN_CAPA_CHANNEL	0x04
-#define IW_SCAN_CAPA_MODE		0x08
-#define IW_SCAN_CAPA_RATE		0x10
-#define IW_SCAN_CAPA_TYPE		0x20
-#define IW_SCAN_CAPA_TIME		0x40
-
-/* Max number of char in custom event - use multiple of them if needed */
-#define IW_CUSTOM_MAX		256	/* In bytes */
-
-/* Generic information element */
-#define IW_GENERIC_IE_MAX	1024
-
-/* MLME requests (SIOCSIWMLME / struct iw_mlme) */
-#define IW_MLME_DEAUTH		0
-#define IW_MLME_DISASSOC	1
-#define IW_MLME_AUTH		2
-#define IW_MLME_ASSOC		3
-
-/* SIOCSIWAUTH/SIOCGIWAUTH struct iw_param flags */
-#define IW_AUTH_INDEX		0x0FFF
-#define IW_AUTH_FLAGS		0xF000
-/* SIOCSIWAUTH/SIOCGIWAUTH parameters (0 .. 4095)
- * (IW_AUTH_INDEX mask in struct iw_param flags; this is the index of the
- * parameter that is being set/get to; value will be read/written to
- * struct iw_param value field) */
-#define IW_AUTH_WPA_VERSION		0
-#define IW_AUTH_CIPHER_PAIRWISE		1
-#define IW_AUTH_CIPHER_GROUP		2
-#define IW_AUTH_KEY_MGMT		3
-#define IW_AUTH_TKIP_COUNTERMEASURES	4
-#define IW_AUTH_DROP_UNENCRYPTED	5
-#define IW_AUTH_80211_AUTH_ALG		6
-#define IW_AUTH_WPA_ENABLED		7
-#define IW_AUTH_RX_UNENCRYPTED_EAPOL	8
-#define IW_AUTH_ROAMING_CONTROL		9
-#define IW_AUTH_PRIVACY_INVOKED		10
-#define IW_AUTH_CIPHER_GROUP_MGMT	11
-#define IW_AUTH_MFP			12
-
-/* IW_AUTH_WPA_VERSION values (bit field) */
-#define IW_AUTH_WPA_VERSION_DISABLED	0x00000001
-#define IW_AUTH_WPA_VERSION_WPA		0x00000002
-#define IW_AUTH_WPA_VERSION_WPA2	0x00000004
-
-/* IW_AUTH_PAIRWISE_CIPHER, IW_AUTH_GROUP_CIPHER, and IW_AUTH_CIPHER_GROUP_MGMT
- * values (bit field) */
-#define IW_AUTH_CIPHER_NONE	0x00000001
-#define IW_AUTH_CIPHER_WEP40	0x00000002
-#define IW_AUTH_CIPHER_TKIP	0x00000004
-#define IW_AUTH_CIPHER_CCMP	0x00000008
-#define IW_AUTH_CIPHER_WEP104	0x00000010
-#define IW_AUTH_CIPHER_AES_CMAC	0x00000020
-
-/* IW_AUTH_KEY_MGMT values (bit field) */
-#define IW_AUTH_KEY_MGMT_802_1X	1
-#define IW_AUTH_KEY_MGMT_PSK	2
-
-/* IW_AUTH_80211_AUTH_ALG values (bit field) */
-#define IW_AUTH_ALG_OPEN_SYSTEM	0x00000001
-#define IW_AUTH_ALG_SHARED_KEY	0x00000002
-#define IW_AUTH_ALG_LEAP	0x00000004
-
-/* IW_AUTH_ROAMING_CONTROL values */
-#define IW_AUTH_ROAMING_ENABLE	0	/* driver/firmware based roaming */
-#define IW_AUTH_ROAMING_DISABLE	1	/* user space program used for roaming
-					 * control */
-
-/* IW_AUTH_MFP (management frame protection) values */
-#define IW_AUTH_MFP_DISABLED	0	/* MFP disabled */
-#define IW_AUTH_MFP_OPTIONAL	1	/* MFP optional */
-#define IW_AUTH_MFP_REQUIRED	2	/* MFP required */
-
-/* SIOCSIWENCODEEXT definitions */
-#define IW_ENCODE_SEQ_MAX_SIZE	8
-/* struct iw_encode_ext ->alg */
-#define IW_ENCODE_ALG_NONE	0
-#define IW_ENCODE_ALG_WEP	1
-#define IW_ENCODE_ALG_TKIP	2
-#define IW_ENCODE_ALG_CCMP	3
-#define IW_ENCODE_ALG_PMK	4
-#define IW_ENCODE_ALG_AES_CMAC	5
-/* struct iw_encode_ext ->ext_flags */
-#define IW_ENCODE_EXT_TX_SEQ_VALID	0x00000001
-#define IW_ENCODE_EXT_RX_SEQ_VALID	0x00000002
-#define IW_ENCODE_EXT_GROUP_KEY		0x00000004
-#define IW_ENCODE_EXT_SET_TX_KEY	0x00000008
-
-/* IWEVMICHAELMICFAILURE : struct iw_michaelmicfailure ->flags */
-#define IW_MICFAILURE_KEY_ID	0x00000003 /* Key ID 0..3 */
-#define IW_MICFAILURE_GROUP	0x00000004
-#define IW_MICFAILURE_PAIRWISE	0x00000008
-#define IW_MICFAILURE_STAKEY	0x00000010
-#define IW_MICFAILURE_COUNT	0x00000060 /* 1 or 2 (0 = count not supported)
-					    */
-
-/* Bit field values for enc_capa in struct iw_range */
-#define IW_ENC_CAPA_WPA		0x00000001
-#define IW_ENC_CAPA_WPA2	0x00000002
-#define IW_ENC_CAPA_CIPHER_TKIP	0x00000004
-#define IW_ENC_CAPA_CIPHER_CCMP	0x00000008
-#define IW_ENC_CAPA_4WAY_HANDSHAKE	0x00000010
-
-/* Event capability macros - in (struct iw_range *)->event_capa
- * Because we have more than 32 possible events, we use an array of
- * 32 bit bitmasks. Note : 32 bits = 0x20 = 2^5. */
-#define IW_EVENT_CAPA_BASE(cmd)		((cmd >= SIOCIWFIRSTPRIV) ? \
-					 (cmd - SIOCIWFIRSTPRIV + 0x60) : \
-					 (cmd - SIOCIWFIRST))
-#define IW_EVENT_CAPA_INDEX(cmd)	(IW_EVENT_CAPA_BASE(cmd) >> 5)
-#define IW_EVENT_CAPA_MASK(cmd)		(1 << (IW_EVENT_CAPA_BASE(cmd) & 0x1F))
-/* Event capability constants - event autogenerated by the kernel
- * This list is valid for most 802.11 devices, customise as needed... */
-#define IW_EVENT_CAPA_K_0	(IW_EVENT_CAPA_MASK(0x8B04) | \
-				 IW_EVENT_CAPA_MASK(0x8B06) | \
-				 IW_EVENT_CAPA_MASK(0x8B1A))
-#define IW_EVENT_CAPA_K_1	(IW_EVENT_CAPA_MASK(0x8B2A))
-/* "Easy" macro to set events in iw_range (less efficient) */
-#define IW_EVENT_CAPA_SET(event_capa, cmd) (event_capa[IW_EVENT_CAPA_INDEX(cmd)] |= IW_EVENT_CAPA_MASK(cmd))
-#define IW_EVENT_CAPA_SET_KERNEL(event_capa) {event_capa[0] |= IW_EVENT_CAPA_K_0; event_capa[1] |= IW_EVENT_CAPA_K_1; }
-
-
-/****************************** TYPES ******************************/
-
-/* --------------------------- SUBTYPES --------------------------- */
-/*
- *	Generic format for most parameters that fit in an int
- */
-struct	iw_param
-{
-  __s32		value;		/* The value of the parameter itself */
-  __u8		fixed;		/* Hardware should not use auto select */
-  __u8		disabled;	/* Disable the feature */
-  __u16		flags;		/* Various specifc flags (if any) */
-};
-
-/*
- *	For all data larger than 16 octets, we need to use a
- *	pointer to memory allocated in user space.
- */
-struct	iw_point
-{
-  void __user	*pointer;	/* Pointer to the data  (in user space) */
-  __u16		length;		/* number of fields or size in bytes */
-  __u16		flags;		/* Optional params */
-};
-
-#ifdef __KERNEL__
-#ifdef CONFIG_COMPAT
-
-#include <linux/compat.h>
-
-struct compat_iw_point {
-	compat_caddr_t pointer;
-	__u16 length;
-	__u16 flags;
-};
-#endif
-#endif
-
-/*
- *	A frequency
- *	For numbers lower than 10^9, we encode the number in 'm' and
- *	set 'e' to 0
- *	For number greater than 10^9, we divide it by the lowest power
- *	of 10 to get 'm' lower than 10^9, with 'm'= f / (10^'e')...
- *	The power of 10 is in 'e', the result of the division is in 'm'.
- */
-struct	iw_freq
-{
-	__s32		m;		/* Mantissa */
-	__s16		e;		/* Exponent */
-	__u8		i;		/* List index (when in range struct) */
-	__u8		flags;		/* Flags (fixed/auto) */
-};
-
-/*
- *	Quality of the link
- */
-struct	iw_quality
-{
-	__u8		qual;		/* link quality (%retries, SNR,
-					   %missed beacons or better...) */
-	__u8		level;		/* signal level (dBm) */
-	__u8		noise;		/* noise level (dBm) */
-	__u8		updated;	/* Flags to know if updated */
-};
-
-/*
- *	Packet discarded in the wireless adapter due to
- *	"wireless" specific problems...
- *	Note : the list of counter and statistics in net_device_stats
- *	is already pretty exhaustive, and you should use that first.
- *	This is only additional stats...
- */
-struct	iw_discarded
-{
-	__u32		nwid;		/* Rx : Wrong nwid/essid */
-	__u32		code;		/* Rx : Unable to code/decode (WEP) */
-	__u32		fragment;	/* Rx : Can't perform MAC reassembly */
-	__u32		retries;	/* Tx : Max MAC retries num reached */
-	__u32		misc;		/* Others cases */
-};
-
-/*
- *	Packet/Time period missed in the wireless adapter due to
- *	"wireless" specific problems...
- */
-struct	iw_missed
-{
-	__u32		beacon;		/* Missed beacons/superframe */
-};
-
-/*
- *	Quality range (for spy threshold)
- */
-struct	iw_thrspy
-{
-	struct sockaddr		addr;		/* Source address (hw/mac) */
-	struct iw_quality	qual;		/* Quality of the link */
-	struct iw_quality	low;		/* Low threshold */
-	struct iw_quality	high;		/* High threshold */
-};
-
-/*
- *	Optional data for scan request
- *
- *	Note: these optional parameters are controlling parameters for the
- *	scanning behavior, these do not apply to getting scan results
- *	(SIOCGIWSCAN). Drivers are expected to keep a local BSS table and
- *	provide a merged results with all BSSes even if the previous scan
- *	request limited scanning to a subset, e.g., by specifying an SSID.
- *	Especially, scan results are required to include an entry for the
- *	current BSS if the driver is in Managed mode and associated with an AP.
- */
-struct	iw_scan_req
-{
-	__u8		scan_type; /* IW_SCAN_TYPE_{ACTIVE,PASSIVE} */
-	__u8		essid_len;
-	__u8		num_channels; /* num entries in channel_list;
-				       * 0 = scan all allowed channels */
-	__u8		flags; /* reserved as padding; use zero, this may
-				* be used in the future for adding flags
-				* to request different scan behavior */
-	struct sockaddr	bssid; /* ff:ff:ff:ff:ff:ff for broadcast BSSID or
-				* individual address of a specific BSS */
-
-	/*
-	 * Use this ESSID if IW_SCAN_THIS_ESSID flag is used instead of using
-	 * the current ESSID. This allows scan requests for specific ESSID
-	 * without having to change the current ESSID and potentially breaking
-	 * the current association.
-	 */
-	__u8		essid[IW_ESSID_MAX_SIZE];
-
-	/*
-	 * Optional parameters for changing the default scanning behavior.
-	 * These are based on the MLME-SCAN.request from IEEE Std 802.11.
-	 * TU is 1.024 ms. If these are set to 0, driver is expected to use
-	 * reasonable default values. min_channel_time defines the time that
-	 * will be used to wait for the first reply on each channel. If no
-	 * replies are received, next channel will be scanned after this. If
-	 * replies are received, total time waited on the channel is defined by
-	 * max_channel_time.
-	 */
-	__u32		min_channel_time; /* in TU */
-	__u32		max_channel_time; /* in TU */
-
-	struct iw_freq	channel_list[IW_MAX_FREQUENCIES];
-};
-
-/* ------------------------- WPA SUPPORT ------------------------- */
-
-/*
- *	Extended data structure for get/set encoding (this is used with
- *	SIOCSIWENCODEEXT/SIOCGIWENCODEEXT. struct iw_point and IW_ENCODE_*
- *	flags are used in the same way as with SIOCSIWENCODE/SIOCGIWENCODE and
- *	only the data contents changes (key data -> this structure, including
- *	key data).
- *
- *	If the new key is the first group key, it will be set as the default
- *	TX key. Otherwise, default TX key index is only changed if
- *	IW_ENCODE_EXT_SET_TX_KEY flag is set.
- *
- *	Key will be changed with SIOCSIWENCODEEXT in all cases except for
- *	special "change TX key index" operation which is indicated by setting
- *	key_len = 0 and ext_flags |= IW_ENCODE_EXT_SET_TX_KEY.
- *
- *	tx_seq/rx_seq are only used when respective
- *	IW_ENCODE_EXT_{TX,RX}_SEQ_VALID flag is set in ext_flags. Normal
- *	TKIP/CCMP operation is to set RX seq with SIOCSIWENCODEEXT and start
- *	TX seq from zero whenever key is changed. SIOCGIWENCODEEXT is normally
- *	used only by an Authenticator (AP or an IBSS station) to get the
- *	current TX sequence number. Using TX_SEQ_VALID for SIOCSIWENCODEEXT and
- *	RX_SEQ_VALID for SIOCGIWENCODEEXT are optional, but can be useful for
- *	debugging/testing.
- */
-struct	iw_encode_ext
-{
-	__u32		ext_flags; /* IW_ENCODE_EXT_* */
-	__u8		tx_seq[IW_ENCODE_SEQ_MAX_SIZE]; /* LSB first */
-	__u8		rx_seq[IW_ENCODE_SEQ_MAX_SIZE]; /* LSB first */
-	struct sockaddr	addr; /* ff:ff:ff:ff:ff:ff for broadcast/multicast
-			       * (group) keys or unicast address for
-			       * individual keys */
-	__u16		alg; /* IW_ENCODE_ALG_* */
-	__u16		key_len;
-	__u8		key[0];
-};
-
-/* SIOCSIWMLME data */
-struct	iw_mlme
-{
-	__u16		cmd; /* IW_MLME_* */
-	__u16		reason_code;
-	struct sockaddr	addr;
-};
-
-/* SIOCSIWPMKSA data */
-#define IW_PMKSA_ADD		1
-#define IW_PMKSA_REMOVE		2
-#define IW_PMKSA_FLUSH		3
-
-#define IW_PMKID_LEN	16
-
-struct	iw_pmksa
-{
-	__u32		cmd; /* IW_PMKSA_* */
-	struct sockaddr	bssid;
-	__u8		pmkid[IW_PMKID_LEN];
-};
-
-/* IWEVMICHAELMICFAILURE data */
-struct	iw_michaelmicfailure
-{
-	__u32		flags;
-	struct sockaddr	src_addr;
-	__u8		tsc[IW_ENCODE_SEQ_MAX_SIZE]; /* LSB first */
-};
-
-/* IWEVPMKIDCAND data */
-#define IW_PMKID_CAND_PREAUTH	0x00000001 /* RNS pre-authentication enabled */
-struct	iw_pmkid_cand
-{
-	__u32		flags; /* IW_PMKID_CAND_* */
-	__u32		index; /* the smaller the index, the higher the
-				* priority */
-	struct sockaddr	bssid;
-};
-
-/* ------------------------ WIRELESS STATS ------------------------ */
-/*
- * Wireless statistics (used for /proc/net/wireless)
- */
-struct	iw_statistics
-{
-	__u16		status;		/* Status
-					 * - device dependent for now */
-
-	struct iw_quality	qual;		/* Quality of the link
-						 * (instant/mean/max) */
-	struct iw_discarded	discard;	/* Packet discarded counts */
-	struct iw_missed	miss;		/* Packet missed counts */
-};
-
-/* ------------------------ IOCTL REQUEST ------------------------ */
-/*
- * This structure defines the payload of an ioctl, and is used 
- * below.
- *
- * Note that this structure should fit on the memory footprint
- * of iwreq (which is the same as ifreq), which mean a max size of
- * 16 octets = 128 bits. Warning, pointers might be 64 bits wide...
- * You should check this when increasing the structures defined
- * above in this file...
- */
-union	iwreq_data
-{
-	/* Config - generic */
-	char		name[IFNAMSIZ];
-	/* Name : used to verify the presence of  wireless extensions.
-	 * Name of the protocol/provider... */
-
-	struct iw_point	essid;		/* Extended network name */
-	struct iw_param	nwid;		/* network id (or domain - the cell) */
-	struct iw_freq	freq;		/* frequency or channel :
-					 * 0-1000 = channel
-					 * > 1000 = frequency in Hz */
-
-	struct iw_param	sens;		/* signal level threshold */
-	struct iw_param	bitrate;	/* default bit rate */
-	struct iw_param	txpower;	/* default transmit power */
-	struct iw_param	rts;		/* RTS threshold threshold */
-	struct iw_param	frag;		/* Fragmentation threshold */
-	__u32		mode;		/* Operation mode */
-	struct iw_param	retry;		/* Retry limits & lifetime */
-
-	struct iw_point	encoding;	/* Encoding stuff : tokens */
-	struct iw_param	power;		/* PM duration/timeout */
-	struct iw_quality qual;		/* Quality part of statistics */
-
-	struct sockaddr	ap_addr;	/* Access point address */
-	struct sockaddr	addr;		/* Destination address (hw/mac) */
-
-	struct iw_param	param;		/* Other small parameters */
-	struct iw_point	data;		/* Other large parameters */
-};
-
-/*
- * The structure to exchange data for ioctl.
- * This structure is the same as 'struct ifreq', but (re)defined for
- * convenience...
- * Do I need to remind you about structure size (32 octets) ?
- */
-struct	iwreq 
-{
-	union
-	{
-		char	ifrn_name[IFNAMSIZ];	/* if name, e.g. "eth0" */
-	} ifr_ifrn;
-
-	/* Data part (defined just above) */
-	union	iwreq_data	u;
-};
-
-/* -------------------------- IOCTL DATA -------------------------- */
-/*
- *	For those ioctl which want to exchange mode data that what could
- *	fit in the above structure...
- */
-
-/*
- *	Range of parameters
- */
-
-struct	iw_range
-{
-	/* Informative stuff (to choose between different interface) */
-	__u32		throughput;	/* To give an idea... */
-	/* In theory this value should be the maximum benchmarked
-	 * TCP/IP throughput, because with most of these devices the
-	 * bit rate is meaningless (overhead an co) to estimate how
-	 * fast the connection will go and pick the fastest one.
-	 * I suggest people to play with Netperf or any benchmark...
-	 */
-
-	/* NWID (or domain id) */
-	__u32		min_nwid;	/* Minimal NWID we are able to set */
-	__u32		max_nwid;	/* Maximal NWID we are able to set */
-
-	/* Old Frequency (backward compat - moved lower ) */
-	__u16		old_num_channels;
-	__u8		old_num_frequency;
-
-	/* Scan capabilities */
-	__u8		scan_capa; 	/* IW_SCAN_CAPA_* bit field */
-
-	/* Wireless event capability bitmasks */
-	__u32		event_capa[6];
-
-	/* signal level threshold range */
-	__s32		sensitivity;
-
-	/* Quality of link & SNR stuff */
-	/* Quality range (link, level, noise)
-	 * If the quality is absolute, it will be in the range [0 ; max_qual],
-	 * if the quality is dBm, it will be in the range [max_qual ; 0].
-	 * Don't forget that we use 8 bit arithmetics... */
-	struct iw_quality	max_qual;	/* Quality of the link */
-	/* This should contain the average/typical values of the quality
-	 * indicator. This should be the threshold between a "good" and
-	 * a "bad" link (example : monitor going from green to orange).
-	 * Currently, user space apps like quality monitors don't have any
-	 * way to calibrate the measurement. With this, they can split
-	 * the range between 0 and max_qual in different quality level
-	 * (using a geometric subdivision centered on the average).
-	 * I expect that people doing the user space apps will feedback
-	 * us on which value we need to put in each driver... */
-	struct iw_quality	avg_qual;	/* Quality of the link */
-
-	/* Rates */
-	__u8		num_bitrates;	/* Number of entries in the list */
-	__s32		bitrate[IW_MAX_BITRATES];	/* list, in bps */
-
-	/* RTS threshold */
-	__s32		min_rts;	/* Minimal RTS threshold */
-	__s32		max_rts;	/* Maximal RTS threshold */
-
-	/* Frag threshold */
-	__s32		min_frag;	/* Minimal frag threshold */
-	__s32		max_frag;	/* Maximal frag threshold */
-
-	/* Power Management duration & timeout */
-	__s32		min_pmp;	/* Minimal PM period */
-	__s32		max_pmp;	/* Maximal PM period */
-	__s32		min_pmt;	/* Minimal PM timeout */
-	__s32		max_pmt;	/* Maximal PM timeout */
-	__u16		pmp_flags;	/* How to decode max/min PM period */
-	__u16		pmt_flags;	/* How to decode max/min PM timeout */
-	__u16		pm_capa;	/* What PM options are supported */
-
-	/* Encoder stuff */
-	__u16	encoding_size[IW_MAX_ENCODING_SIZES];	/* Different token sizes */
-	__u8	num_encoding_sizes;	/* Number of entry in the list */
-	__u8	max_encoding_tokens;	/* Max number of tokens */
-	/* For drivers that need a "login/passwd" form */
-	__u8	encoding_login_index;	/* token index for login token */
-
-	/* Transmit power */
-	__u16		txpower_capa;	/* What options are supported */
-	__u8		num_txpower;	/* Number of entries in the list */
-	__s32		txpower[IW_MAX_TXPOWER];	/* list, in bps */
-
-	/* Wireless Extension version info */
-	__u8		we_version_compiled;	/* Must be WIRELESS_EXT */
-	__u8		we_version_source;	/* Last update of source */
-
-	/* Retry limits and lifetime */
-	__u16		retry_capa;	/* What retry options are supported */
-	__u16		retry_flags;	/* How to decode max/min retry limit */
-	__u16		r_time_flags;	/* How to decode max/min retry life */
-	__s32		min_retry;	/* Minimal number of retries */
-	__s32		max_retry;	/* Maximal number of retries */
-	__s32		min_r_time;	/* Minimal retry lifetime */
-	__s32		max_r_time;	/* Maximal retry lifetime */
-
-	/* Frequency */
-	__u16		num_channels;	/* Number of channels [0; num - 1] */
-	__u8		num_frequency;	/* Number of entry in the list */
-	struct iw_freq	freq[IW_MAX_FREQUENCIES];	/* list */
-	/* Note : this frequency list doesn't need to fit channel numbers,
-	 * because each entry contain its channel index */
-
-	__u32		enc_capa;	/* IW_ENC_CAPA_* bit field */
-};
-
-/*
- * Private ioctl interface information
- */
- 
-struct	iw_priv_args
-{
-	__u32		cmd;		/* Number of the ioctl to issue */
-	__u16		set_args;	/* Type and number of args */
-	__u16		get_args;	/* Type and number of args */
-	char		name[IFNAMSIZ];	/* Name of the extension */
-};
-
-/* ----------------------- WIRELESS EVENTS ----------------------- */
-/*
- * Wireless events are carried through the rtnetlink socket to user
- * space. They are encapsulated in the IFLA_WIRELESS field of
- * a RTM_NEWLINK message.
- */
-
-/*
- * A Wireless Event. Contains basically the same data as the ioctl...
- */
-struct iw_event
-{
-	__u16		len;			/* Real length of this stuff */
-	__u16		cmd;			/* Wireless IOCTL */
-	union iwreq_data	u;		/* IOCTL fixed payload */
-};
-
-/* Size of the Event prefix (including padding and alignement junk) */
-#define IW_EV_LCP_LEN	(sizeof(struct iw_event) - sizeof(union iwreq_data))
-/* Size of the various events */
-#define IW_EV_CHAR_LEN	(IW_EV_LCP_LEN + IFNAMSIZ)
-#define IW_EV_UINT_LEN	(IW_EV_LCP_LEN + sizeof(__u32))
-#define IW_EV_FREQ_LEN	(IW_EV_LCP_LEN + sizeof(struct iw_freq))
-#define IW_EV_PARAM_LEN	(IW_EV_LCP_LEN + sizeof(struct iw_param))
-#define IW_EV_ADDR_LEN	(IW_EV_LCP_LEN + sizeof(struct sockaddr))
-#define IW_EV_QUAL_LEN	(IW_EV_LCP_LEN + sizeof(struct iw_quality))
-
-/* iw_point events are special. First, the payload (extra data) come at
- * the end of the event, so they are bigger than IW_EV_POINT_LEN. Second,
- * we omit the pointer, so start at an offset. */
-#define IW_EV_POINT_OFF (((char *) &(((struct iw_point *) NULL)->length)) - \
-			  (char *) NULL)
-#define IW_EV_POINT_LEN	(IW_EV_LCP_LEN + sizeof(struct iw_point) - \
-			 IW_EV_POINT_OFF)
-
-#ifdef __KERNEL__
-#ifdef CONFIG_COMPAT
-struct __compat_iw_event {
-	__u16		len;			/* Real length of this stuff */
-	__u16		cmd;			/* Wireless IOCTL */
-	compat_caddr_t	pointer;
-};
-#define IW_EV_COMPAT_LCP_LEN offsetof(struct __compat_iw_event, pointer)
-#define IW_EV_COMPAT_POINT_OFF offsetof(struct compat_iw_point, length)
-
-/* Size of the various events for compat */
-#define IW_EV_COMPAT_CHAR_LEN	(IW_EV_COMPAT_LCP_LEN + IFNAMSIZ)
-#define IW_EV_COMPAT_UINT_LEN	(IW_EV_COMPAT_LCP_LEN + sizeof(__u32))
-#define IW_EV_COMPAT_FREQ_LEN	(IW_EV_COMPAT_LCP_LEN + sizeof(struct iw_freq))
-#define IW_EV_COMPAT_PARAM_LEN	(IW_EV_COMPAT_LCP_LEN + sizeof(struct iw_param))
-#define IW_EV_COMPAT_ADDR_LEN	(IW_EV_COMPAT_LCP_LEN + sizeof(struct sockaddr))
-#define IW_EV_COMPAT_QUAL_LEN	(IW_EV_COMPAT_LCP_LEN + sizeof(struct iw_quality))
-#define IW_EV_COMPAT_POINT_LEN	\
-	(IW_EV_COMPAT_LCP_LEN + sizeof(struct compat_iw_point) - \
-	 IW_EV_COMPAT_POINT_OFF)
-#endif
-#endif
-
-/* Size of the Event prefix when packed in stream */
-#define IW_EV_LCP_PK_LEN	(4)
-/* Size of the various events when packed in stream */
-#define IW_EV_CHAR_PK_LEN	(IW_EV_LCP_PK_LEN + IFNAMSIZ)
-#define IW_EV_UINT_PK_LEN	(IW_EV_LCP_PK_LEN + sizeof(__u32))
-#define IW_EV_FREQ_PK_LEN	(IW_EV_LCP_PK_LEN + sizeof(struct iw_freq))
-#define IW_EV_PARAM_PK_LEN	(IW_EV_LCP_PK_LEN + sizeof(struct iw_param))
-#define IW_EV_ADDR_PK_LEN	(IW_EV_LCP_PK_LEN + sizeof(struct sockaddr))
-#define IW_EV_QUAL_PK_LEN	(IW_EV_LCP_PK_LEN + sizeof(struct iw_quality))
-#define IW_EV_POINT_PK_LEN	(IW_EV_LCP_PK_LEN + 4)
-
-#endif	/* _LINUX_WIRELESS_H */
diff --git a/ANDROID_3.4.5/include/linux/wl127x-rfkill.h b/ANDROID_3.4.5/include/linux/wl127x-rfkill.h
deleted file mode 100644
index 9057ec63..00000000
--- a/ANDROID_3.4.5/include/linux/wl127x-rfkill.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * Bluetooth TI wl127x rfkill power control via GPIO
- *
- * Copyright (C) 2009 Motorola, Inc.
- * Copyright (C) 2008 Texas Instruments
- * Initial code: Pavan Savoy <pavan.savoy@gmail.com> (wl127x_power.c)
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- */
-
-#ifndef _LINUX_WL127X_RFKILL_H
-#define _LINUX_WL127X_RFKILL_H
-
-#include <linux/rfkill.h>
-
-struct wl127x_rfkill_platform_data {
-	int nshutdown_gpio;
-
-	struct rfkill *rfkill;  /* for driver only */
-};
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/wl12xx.h b/ANDROID_3.4.5/include/linux/wl12xx.h
deleted file mode 100644
index 0d637319..00000000
--- a/ANDROID_3.4.5/include/linux/wl12xx.h
+++ /dev/null
@@ -1,81 +0,0 @@
-/*
- * This file is part of wl12xx
- *
- * Copyright (C) 2009 Nokia Corporation
- *
- * Contact: Luciano Coelho <luciano.coelho@nokia.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- */
-
-#ifndef _LINUX_WL12XX_H
-#define _LINUX_WL12XX_H
-
-/* Reference clock values */
-enum {
-	WL12XX_REFCLOCK_19	= 0, /* 19.2 MHz */
-	WL12XX_REFCLOCK_26	= 1, /* 26 MHz */
-	WL12XX_REFCLOCK_38	= 2, /* 38.4 MHz */
-	WL12XX_REFCLOCK_52	= 3, /* 52 MHz */
-	WL12XX_REFCLOCK_38_XTAL = 4, /* 38.4 MHz, XTAL */
-	WL12XX_REFCLOCK_26_XTAL = 5, /* 26 MHz, XTAL */
-};
-
-/* TCXO clock values */
-enum {
-	WL12XX_TCXOCLOCK_19_2	= 0, /* 19.2MHz */
-	WL12XX_TCXOCLOCK_26	= 1, /* 26 MHz */
-	WL12XX_TCXOCLOCK_38_4	= 2, /* 38.4MHz */
-	WL12XX_TCXOCLOCK_52	= 3, /* 52 MHz */
-	WL12XX_TCXOCLOCK_16_368	= 4, /* 16.368 MHz */
-	WL12XX_TCXOCLOCK_32_736	= 5, /* 32.736 MHz */
-	WL12XX_TCXOCLOCK_16_8	= 6, /* 16.8 MHz */
-	WL12XX_TCXOCLOCK_33_6	= 7, /* 33.6 MHz */
-};
-
-struct wl12xx_platform_data {
-	void (*set_power)(bool enable);
-	/* SDIO only: IRQ number if WLAN_IRQ line is used, 0 for SDIO IRQs */
-	int irq;
-	bool use_eeprom;
-	int board_ref_clock;
-	int board_tcxo_clock;
-	unsigned long platform_quirks;
-	bool pwr_in_suspend;
-
-	struct wl1271_if_operations *ops;
-};
-
-/* Platform does not support level trigger interrupts */
-#define WL12XX_PLATFORM_QUIRK_EDGE_IRQ	BIT(0)
-
-#ifdef CONFIG_WL12XX_PLATFORM_DATA
-
-int wl12xx_set_platform_data(const struct wl12xx_platform_data *data);
-
-#else
-
-static inline
-int wl12xx_set_platform_data(const struct wl12xx_platform_data *data)
-{
-	return -ENOSYS;
-}
-
-#endif
-
-struct wl12xx_platform_data *wl12xx_get_platform_data(void);
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/wlan_plat.h b/ANDROID_3.4.5/include/linux/wlan_plat.h
deleted file mode 100644
index 40ec3482..00000000
--- a/ANDROID_3.4.5/include/linux/wlan_plat.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/* include/linux/wlan_plat.h
- *
- * Copyright (C) 2010 Google, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-#ifndef _LINUX_WLAN_PLAT_H_
-#define _LINUX_WLAN_PLAT_H_
-
-struct wifi_platform_data {
-	int (*set_power)(int val);
-	int (*set_reset)(int val);
-	int (*set_carddetect)(int val);
-	void *(*mem_prealloc)(int section, unsigned long size);
-	int (*get_mac_addr)(unsigned char *buf);
-	void *(*get_country_code)(char *ccode);
-};
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/wm97xx.h b/ANDROID_3.4.5/include/linux/wm97xx.h
deleted file mode 100644
index fd98bb96..00000000
--- a/ANDROID_3.4.5/include/linux/wm97xx.h
+++ /dev/null
@@ -1,337 +0,0 @@
-
-/*
- * Register bits and API for Wolfson WM97xx series of codecs
- */
-
-#ifndef _LINUX_WM97XX_H
-#define _LINUX_WM97XX_H
-
-#include <sound/core.h>
-#include <sound/pcm.h>
-#include <sound/ac97_codec.h>
-#include <sound/initval.h>
-#include <linux/types.h>
-#include <linux/list.h>
-#include <linux/input.h>	/* Input device layer */
-#include <linux/platform_device.h>
-
-/*
- * WM97xx variants
- */
-#define	WM97xx_GENERIC			0x0000
-#define	WM97xx_WM1613			0x1613
-
-/*
- * WM97xx AC97 Touchscreen registers
- */
-#define AC97_WM97XX_DIGITISER1		0x76
-#define AC97_WM97XX_DIGITISER2		0x78
-#define AC97_WM97XX_DIGITISER_RD 	0x7a
-#define AC97_WM9713_DIG1		0x74
-#define AC97_WM9713_DIG2		AC97_WM97XX_DIGITISER1
-#define AC97_WM9713_DIG3		AC97_WM97XX_DIGITISER2
-
-/*
- * WM97xx register bits
- */
-#define WM97XX_POLL		0x8000	/* initiate a polling measurement */
-#define WM97XX_ADCSEL_X		0x1000	/* x coord measurement */
-#define WM97XX_ADCSEL_Y		0x2000	/* y coord measurement */
-#define WM97XX_ADCSEL_PRES	0x3000	/* pressure measurement */
-#define WM97XX_AUX_ID1		0x4000
-#define WM97XX_AUX_ID2		0x5000
-#define WM97XX_AUX_ID3		0x6000
-#define WM97XX_AUX_ID4		0x7000
-#define WM97XX_ADCSEL_MASK	0x7000	/* ADC selection mask */
-#define WM97XX_COO		0x0800	/* enable coordinate mode */
-#define WM97XX_CTC		0x0400	/* enable continuous mode */
-#define WM97XX_CM_RATE_93	0x0000	/* 93.75Hz continuous rate */
-#define WM97XX_CM_RATE_187	0x0100	/* 187.5Hz continuous rate */
-#define WM97XX_CM_RATE_375	0x0200	/* 375Hz continuous rate */
-#define WM97XX_CM_RATE_750	0x0300	/* 750Hz continuous rate */
-#define WM97XX_CM_RATE_8K	0x00f0	/* 8kHz continuous rate */
-#define WM97XX_CM_RATE_12K	0x01f0	/* 12kHz continuous rate */
-#define WM97XX_CM_RATE_24K	0x02f0	/* 24kHz continuous rate */
-#define WM97XX_CM_RATE_48K	0x03f0	/* 48kHz continuous rate */
-#define WM97XX_CM_RATE_MASK	0x03f0
-#define WM97XX_RATE(i)		(((i & 3) << 8) | ((i & 4) ? 0xf0 : 0))
-#define WM97XX_DELAY(i)		((i << 4) & 0x00f0)	/* sample delay times */
-#define WM97XX_DELAY_MASK	0x00f0
-#define WM97XX_SLEN		0x0008	/* slot read back enable */
-#define WM97XX_SLT(i)		((i - 5) & 0x7)	/* panel slot (5-11) */
-#define WM97XX_SLT_MASK		0x0007
-#define WM97XX_PRP_DETW		0x4000	/* detect on, digitise off, wake */
-#define WM97XX_PRP_DET		0x8000	/* detect on, digitise off, no wake */
-#define WM97XX_PRP_DET_DIG	0xc000	/* setect on, digitise on */
-#define WM97XX_RPR		0x2000	/* wake up on pen down */
-#define WM97XX_PEN_DOWN		0x8000	/* pen is down */
-
-/* WM9712 Bits */
-#define WM9712_45W		0x1000	/* set for 5-wire touchscreen */
-#define WM9712_PDEN		0x0800	/* measure only when pen down */
-#define WM9712_WAIT		0x0200	/* wait until adc is read before next sample */
-#define WM9712_PIL		0x0100	/* current used for pressure measurement. set 400uA else 200uA */
-#define WM9712_MASK_HI		0x0040	/* hi on mask pin (47) stops conversions */
-#define WM9712_MASK_EDGE	0x0080	/* rising/falling edge on pin delays sample */
-#define	WM9712_MASK_SYNC	0x00c0	/* rising/falling edge on mask initiates sample */
-#define WM9712_RPU(i)		(i&0x3f)	/* internal pull up on pen detect (64k / rpu) */
-#define WM9712_PD(i)		(0x1 << i)	/* power management */
-
-/* WM9712 Registers */
-#define AC97_WM9712_POWER	0x24
-#define AC97_WM9712_REV		0x58
-
-/* WM9705 Bits */
-#define WM9705_PDEN		0x1000	/* measure only when pen is down */
-#define WM9705_PINV		0x0800	/* inverts sense of pen down output */
-#define WM9705_BSEN		0x0400	/* BUSY flag enable, pin47 is 1 when busy */
-#define WM9705_BINV		0x0200	/* invert BUSY (pin47) output */
-#define WM9705_WAIT		0x0100	/* wait until adc is read before next sample */
-#define WM9705_PIL		0x0080	/* current used for pressure measurement. set 400uA else 200uA */
-#define WM9705_PHIZ		0x0040	/* set PHONE and PCBEEP inputs to high impedance */
-#define WM9705_MASK_HI		0x0010	/* hi on mask stops conversions */
-#define WM9705_MASK_EDGE	0x0020	/* rising/falling edge on pin delays sample */
-#define	WM9705_MASK_SYNC	0x0030	/* rising/falling edge on mask initiates sample */
-#define WM9705_PDD(i)		(i & 0x000f)	/* pen detect comparator threshold */
-
-
-/* WM9713 Bits */
-#define WM9713_PDPOL		0x0400	/* Pen down polarity */
-#define WM9713_POLL		0x0200	/* initiate a polling measurement */
-#define WM9713_CTC		0x0100	/* enable continuous mode */
-#define WM9713_ADCSEL_X		0x0002	/* X measurement */
-#define WM9713_ADCSEL_Y		0x0004	/* Y measurement */
-#define WM9713_ADCSEL_PRES	0x0008	/* Pressure measurement */
-#define WM9713_COO		0x0001	/* enable coordinate mode */
-#define WM9713_45W		0x1000  /* set for 5 wire panel */
-#define WM9713_PDEN		0x0800	/* measure only when pen down */
-#define WM9713_ADCSEL_MASK	0x00fe	/* ADC selection mask */
-#define WM9713_WAIT		0x0200	/* coordinate wait */
-
-/* AUX ADC ID's */
-#define TS_COMP1		0x0
-#define TS_COMP2		0x1
-#define TS_BMON			0x2
-#define TS_WIPER		0x3
-
-/* ID numbers */
-#define WM97XX_ID1		0x574d
-#define WM9712_ID2		0x4c12
-#define WM9705_ID2		0x4c05
-#define WM9713_ID2		0x4c13
-
-/* Codec GPIO's */
-#define WM97XX_MAX_GPIO		16
-#define WM97XX_GPIO_1		(1 << 1)
-#define WM97XX_GPIO_2		(1 << 2)
-#define WM97XX_GPIO_3		(1 << 3)
-#define WM97XX_GPIO_4		(1 << 4)
-#define WM97XX_GPIO_5		(1 << 5)
-#define WM97XX_GPIO_6		(1 << 6)
-#define WM97XX_GPIO_7		(1 << 7)
-#define WM97XX_GPIO_8		(1 << 8)
-#define WM97XX_GPIO_9		(1 << 9)
-#define WM97XX_GPIO_10		(1 << 10)
-#define WM97XX_GPIO_11		(1 << 11)
-#define WM97XX_GPIO_12		(1 << 12)
-#define WM97XX_GPIO_13		(1 << 13)
-#define WM97XX_GPIO_14		(1 << 14)
-#define WM97XX_GPIO_15		(1 << 15)
-
-
-#define AC97_LINK_FRAME		21	/* time in uS for AC97 link frame */
-
-
-/*---------------- Return codes from sample reading functions ---------------*/
-
-/* More data is available; call the sample gathering function again */
-#define RC_AGAIN			0x00000001
-/* The returned sample is valid */
-#define RC_VALID			0x00000002
-/* The pen is up (the first RC_VALID without RC_PENUP means pen is down) */
-#define RC_PENUP			0x00000004
-/* The pen is down (RC_VALID implies RC_PENDOWN, but sometimes it is helpful
-   to tell the handler that the pen is down but we don't know yet his coords,
-   so the handler should not sleep or wait for pendown irq) */
-#define RC_PENDOWN			0x00000008
-
-/*
- * The wm97xx driver provides a private API for writing platform-specific
- * drivers.
- */
-
-/* The structure used to return arch specific sampled data into */
-struct wm97xx_data {
-    int x;
-    int y;
-    int p;
-};
-
-/*
- * Codec GPIO status
- */
-enum wm97xx_gpio_status {
-    WM97XX_GPIO_HIGH,
-    WM97XX_GPIO_LOW
-};
-
-/*
- * Codec GPIO direction
- */
-enum wm97xx_gpio_dir {
-    WM97XX_GPIO_IN,
-    WM97XX_GPIO_OUT
-};
-
-/*
- * Codec GPIO polarity
- */
-enum wm97xx_gpio_pol {
-    WM97XX_GPIO_POL_HIGH,
-    WM97XX_GPIO_POL_LOW
-};
-
-/*
- * Codec GPIO sticky
- */
-enum wm97xx_gpio_sticky {
-    WM97XX_GPIO_STICKY,
-    WM97XX_GPIO_NOTSTICKY
-};
-
-/*
- * Codec GPIO wake
- */
-enum wm97xx_gpio_wake {
-    WM97XX_GPIO_WAKE,
-    WM97XX_GPIO_NOWAKE
-};
-
-/*
- * Digitiser ioctl commands
- */
-#define WM97XX_DIG_START	0x1
-#define WM97XX_DIG_STOP		0x2
-#define WM97XX_PHY_INIT		0x3
-#define WM97XX_AUX_PREPARE	0x4
-#define WM97XX_DIG_RESTORE	0x5
-
-struct wm97xx;
-
-extern struct wm97xx_codec_drv wm9705_codec;
-extern struct wm97xx_codec_drv wm9712_codec;
-extern struct wm97xx_codec_drv wm9713_codec;
-
-/*
- * Codec driver interface - allows mapping to WM9705/12/13 and newer codecs
- */
-struct wm97xx_codec_drv {
-	u16 id;
-	char *name;
-
-	/* read 1 sample */
-	int (*poll_sample) (struct wm97xx *, int adcsel, int *sample);
-
-	/* read X,Y,[P] in poll */
-	int (*poll_touch) (struct wm97xx *, struct wm97xx_data *);
-
-	int (*acc_enable) (struct wm97xx *, int enable);
-	void (*phy_init) (struct wm97xx *);
-	void (*dig_enable) (struct wm97xx *, int enable);
-	void (*dig_restore) (struct wm97xx *);
-	void (*aux_prepare) (struct wm97xx *);
-};
-
-
-/* Machine specific and accelerated touch operations */
-struct wm97xx_mach_ops {
-
-	/* accelerated touch readback - coords are transmited on AC97 link */
-	int acc_enabled;
-	void (*acc_pen_up) (struct wm97xx *);
-	int (*acc_pen_down) (struct wm97xx *);
-	int (*acc_startup) (struct wm97xx *);
-	void (*acc_shutdown) (struct wm97xx *);
-
-	/* interrupt mask control - required for accelerated operation */
-	void (*irq_enable) (struct wm97xx *, int enable);
-
-	/* GPIO pin used for accelerated operation */
-	int irq_gpio;
-
-	/* pre and post sample - can be used to minimise any analog noise */
-	void (*pre_sample) (int);  /* function to run before sampling */
-	void (*post_sample) (int);  /* function to run after sampling */
-};
-
-struct wm97xx {
-	u16 dig[3], id, gpio[6], misc;	/* Cached codec registers */
-	u16 dig_save[3];		/* saved during aux reading */
-	struct wm97xx_codec_drv *codec;	/* attached codec driver*/
-	struct input_dev *input_dev;	/* touchscreen input device */
-	struct snd_ac97 *ac97;		/* ALSA codec access */
-	struct device *dev;		/* ALSA device */
-	struct platform_device *battery_dev;
-	struct platform_device *touch_dev;
-	struct wm97xx_mach_ops *mach_ops;
-	struct mutex codec_mutex;
-	struct delayed_work ts_reader;  /* Used to poll touchscreen */
-	unsigned long ts_reader_interval; /* Current interval for timer */
-	unsigned long ts_reader_min_interval; /* Minimum interval */
-	unsigned int pen_irq;		/* Pen IRQ number in use */
-	struct workqueue_struct *ts_workq;
-	struct work_struct pen_event_work;
-	u16 acc_slot;			/* AC97 slot used for acc touch data */
-	u16 acc_rate;			/* acc touch data rate */
-	unsigned pen_is_down:1;		/* Pen is down */
-	unsigned aux_waiting:1;		/* aux measurement waiting */
-	unsigned pen_probably_down:1;	/* used in polling mode */
-	u16 variant;			/* WM97xx chip variant */
-	u16 suspend_mode;               /* PRP in suspend mode */
-};
-
-struct wm97xx_batt_pdata {
-	int	batt_aux;
-	int	temp_aux;
-	int	charge_gpio;
-	int	min_voltage;
-	int	max_voltage;
-	int	batt_div;
-	int	batt_mult;
-	int	temp_div;
-	int	temp_mult;
-	int	batt_tech;
-	char	*batt_name;
-};
-
-struct wm97xx_pdata {
-	struct wm97xx_batt_pdata	*batt_pdata;	/* battery data */
-};
-
-/*
- * Codec GPIO access (not supported on WM9705)
- * This can be used to set/get codec GPIO and Virtual GPIO status.
- */
-enum wm97xx_gpio_status wm97xx_get_gpio(struct wm97xx *wm, u32 gpio);
-void wm97xx_set_gpio(struct wm97xx *wm, u32 gpio,
-			  enum wm97xx_gpio_status status);
-void wm97xx_config_gpio(struct wm97xx *wm, u32 gpio,
-				     enum wm97xx_gpio_dir dir,
-				     enum wm97xx_gpio_pol pol,
-				     enum wm97xx_gpio_sticky sticky,
-				     enum wm97xx_gpio_wake wake);
-
-void wm97xx_set_suspend_mode(struct wm97xx *wm, u16 mode);
-
-/* codec AC97 IO access */
-int wm97xx_reg_read(struct wm97xx *wm, u16 reg);
-void wm97xx_reg_write(struct wm97xx *wm, u16 reg, u16 val);
-
-/* aux adc readback */
-int wm97xx_read_aux_adc(struct wm97xx *wm, u16 adcsel);
-
-/* machine ops */
-int wm97xx_register_mach_ops(struct wm97xx *, struct wm97xx_mach_ops *);
-void wm97xx_unregister_mach_ops(struct wm97xx *);
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/wmt-efuse-stub.h b/ANDROID_3.4.5/include/linux/wmt-efuse-stub.h
deleted file mode 100755
index d0111014..00000000
--- a/ANDROID_3.4.5/include/linux/wmt-efuse-stub.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/*++ 
- *
- * Copyright c 2014  WonderMedia  Technologies, Inc.
- *
- * This program is free software: you can redistribute it and/or modify 
- * it under the terms of the GNU General Public License as published by 
- * the Free Software Foundation, either version 2 of the License, or 
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, 
- * but WITHOUT ANY WARRANTY; without even the implied warranty of 
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the 
- * GNU General Public License for more details. 
- *
- * You should have received a copy of the GNU General Public License 
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- *
- * WonderMedia Technologies, Inc.
- * 4F, 533, Chung-Cheng Road, Hsin-Tien, Taipei 231, R.O.C
---*/
-
-#ifndef WMT_EFUSE_STUB_H
-/* To assert that only one occurrence is included */
-#define WMT_EFUSE_STUB_H
-
-typedef int (*EFUSE_READ_OTP_STUB) (int type, unsigned char *rbuf, int rlen);
-
-extern EFUSE_READ_OTP_STUB wmt_efuse_read_otp;
-
-#endif /* ifndef WMT_EFUSE_STUB */
-
-/*=== END wmt-efuse-stub.h ==========================================================*/
diff --git a/ANDROID_3.4.5/include/linux/wmt-mb.h b/ANDROID_3.4.5/include/linux/wmt-mb.h
deleted file mode 100755
index c5f3ae84..00000000
--- a/ANDROID_3.4.5/include/linux/wmt-mb.h
+++ /dev/null
@@ -1,98 +0,0 @@
-/*++ 
- * WonderMedia Memory Block driver 
- *
- * Copyright c 2010  WonderMedia  Technologies, Inc.
- *
- * This program is free software: you can redistribute it and/or modify 
- * it under the terms of the GNU General Public License as published by 
- * the Free Software Foundation, either version 2 of the License, or 
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, 
- * but WITHOUT ANY WARRANTY; without even the implied warranty of 
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the 
- * GNU General Public License for more details. 
- *
- * You should have received a copy of the GNU General Public License 
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- *
- * WonderMedia Technologies, Inc.
- * 10F, 529, Chung-Cheng Road, Hsin-Tien, Taipei 231, R.O.C
---*/
-#ifndef MEMBLOCK_H
-#define MEMBLOCK_H
-
-#include <linux/types.h>
-
-struct prdt_struct{
-    unsigned int addr;
-    unsigned short size;
-    unsigned short reserve : 15;
-    unsigned short EDT : 1;
-}__attribute__((packed)) ;
-
-struct mmu_table_info{
-    unsigned int addr;
-    unsigned int size;
-    unsigned int offset;
-}__attribute__((packed)) ;
-
-// 1 presents the task init that would never be released
-#define MB_DEF_TGID				0
-
-#ifdef CONFIG_WMT_MB_RESERVE_FROM_IO
-#define mb_virt_to_phys(v)    mb_do_virt_to_phys(v,MB_DEF_TGID,THE_MB_USER)
-#define mb_phys_to_virt(p)    mb_do_phys_to_virt(p,MB_DEF_TGID,THE_MB_USER)
-#else
-#define mb_virt_to_phys(v)    virt_to_phys(v)
-#define mb_phys_to_virt(p)    phys_to_virt(p)
-#endif
-#define mb_user_to_virt(u)    mb_do_user_to_virt(u,MB_DEF_TGID,THE_MB_USER)
-#define mb_user_to_phys(u)    mb_do_user_to_phys(u,MB_DEF_TGID,THE_MB_USER)
-/* all addresses are physical */
-#define mb_alloc(s)           mb_do_alloc(s,MB_DEF_TGID,THE_MB_USER)
-#define mb_free(p)            mb_do_free(p,MB_DEF_TGID,THE_MB_USER)
-#define mb_get(p)             mb_do_get(p,MB_DEF_TGID,THE_MB_USER)
-#define mb_put(p)             mb_do_put(p,MB_DEF_TGID,THE_MB_USER)
-#define mb_counter(p)         mb_do_counter(p,THE_MB_USER)
-
-void *mb_do_phys_to_virt(unsigned long phys, pid_t, char *);
-unsigned long mb_do_virt_to_phys(void *virt, pid_t, char *);
-unsigned long mb_do_user_to_virt(unsigned long, pid_t, char *);
-unsigned long mb_do_user_to_phys(unsigned long, pid_t, char *);
-unsigned long mb_do_alloc(unsigned long, pid_t, char *);
-int mb_do_free(unsigned long, pid_t, char *);
-int mb_do_get(unsigned long, pid_t, char *);
-int mb_do_put(unsigned long, pid_t, char *);
-int mb_do_counter(unsigned long, char *);
-
-int user_to_prdt(
-    unsigned long user, 
-    unsigned int size, 
-    struct prdt_struct *next,
-    unsigned int items);
-
-unsigned int wmt_mmu_table_size(unsigned int size);
-void wmt_mmu_table_dump(struct mmu_table_info *info);
-int wmt_mmu_table_check(
-    unsigned int mmuPhys, 
-    unsigned int mmuSize,
-    unsigned int size);
-unsigned int wmt_mmu_table_from_phys(
-    unsigned int mmuPhys, 
-    unsigned int mmuSize,
-    unsigned int addr,
-    unsigned int size);
-unsigned int wmt_mmu_table_from_user(
-    unsigned int mmuPhys, 
-    unsigned int mmuSize,
-    unsigned int user,
-    unsigned int size);
-unsigned int wmt_mmu_table_create(
-    unsigned int addr,
-    unsigned int size,
-    unsigned int addrType,
-    struct mmu_table_info *info);
-unsigned int wmt_mmu_table_destroy(struct mmu_table_info *info);
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/wmt-se.h b/ANDROID_3.4.5/include/linux/wmt-se.h
deleted file mode 100755
index 41382643..00000000
--- a/ANDROID_3.4.5/include/linux/wmt-se.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*++ 
- * WonderMedia cipher driver 
- *
- * Copyright c 2012  WonderMedia  Technologies, Inc.
- *
- * This program is free software: you can redistribute it and/or modify 
- * it under the terms of the GNU General Public License as published by 
- * the Free Software Foundation, either version 2 of the License, or 
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, 
- * but WITHOUT ANY WARRANTY; without even the implied warranty of 
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the 
- * GNU General Public License for more details. 
- *
- * You should have received a copy of the GNU General Public License 
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- *
- * WonderMedia Technologies, Inc.
- * 4F, 533, Chung-Cheng Road, Hsin-Tien, Taipei 231, R.O.C
---*/
-
-#ifndef WMT_SE_H
-/* To assert that only one occurrence is included */
-#define WMT_SE_H
-
-
-typedef int (*SE_FPTR)(unsigned char *buf_in, unsigned char *buf_out, int buf_len);
-
-extern SE_FPTR wmt_se_aes;
-extern SE_FPTR wmt_se_aes_core;
-extern SE_FPTR wmt_se_sha;
-
-
-#endif /* ifndef WMT_SE_H */
-
-/*=== END wmt-se.h ==========================================================*/
diff --git a/ANDROID_3.4.5/include/linux/wmt_battery.h b/ANDROID_3.4.5/include/linux/wmt_battery.h
deleted file mode 100755
index eaca14c1..00000000
--- a/ANDROID_3.4.5/include/linux/wmt_battery.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*++
-linux/arch/arm/mach-wmt/board.c
-
-Copyright (c) 2008  WonderMedia Technologies, Inc.
-
-This program is free software: you can redistribute it and/or modify it under the
-terms of the GNU General Public License as published by the Free Software Foundation,
-either version 2 of the License, or (at your option) any later version.
-
-This program is distributed in the hope that it will be useful, but WITHOUT
-ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-PARTICULAR PURPOSE.  See the GNU General Public License for more details.
-You should have received a copy of the GNU General Public License along with
-this program.  If not, see <http://www.gnu.org/licenses/>.
-
-WonderMedia Technologies, Inc.
-10F, 529, Chung-Cheng Road, Hsin-Tien, Taipei 231, R.O.C.
---*/
-#ifndef _LINUX_WMT_BAT_H
-#define _LINUX_WMT_BAT_H
-
-
-struct wmt_battery_info {
-	int	batt_aux;
-	int	temp_aux;
-	int	charge_gpio;
-	int	min_voltage;
-	int	max_voltage;
-	int	batt_div;
-	int	batt_mult;
-	int	temp_div;
-	int	temp_mult;
-	int	batt_tech;
-	char *batt_name;
-};
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/workqueue.h b/ANDROID_3.4.5/include/linux/workqueue.h
deleted file mode 100644
index af155450..00000000
--- a/ANDROID_3.4.5/include/linux/workqueue.h
+++ /dev/null
@@ -1,450 +0,0 @@
-/*
- * workqueue.h --- work queue handling for Linux.
- */
-
-#ifndef _LINUX_WORKQUEUE_H
-#define _LINUX_WORKQUEUE_H
-
-#include <linux/timer.h>
-#include <linux/linkage.h>
-#include <linux/bitops.h>
-#include <linux/lockdep.h>
-#include <linux/threads.h>
-#include <linux/atomic.h>
-
-struct workqueue_struct;
-
-struct work_struct;
-typedef void (*work_func_t)(struct work_struct *work);
-
-/*
- * The first word is the work queue pointer and the flags rolled into
- * one
- */
-#define work_data_bits(work) ((unsigned long *)(&(work)->data))
-
-enum {
-	WORK_STRUCT_PENDING_BIT	= 0,	/* work item is pending execution */
-	WORK_STRUCT_DELAYED_BIT	= 1,	/* work item is delayed */
-	WORK_STRUCT_CWQ_BIT	= 2,	/* data points to cwq */
-	WORK_STRUCT_LINKED_BIT	= 3,	/* next work is linked to this one */
-#ifdef CONFIG_DEBUG_OBJECTS_WORK
-	WORK_STRUCT_STATIC_BIT	= 4,	/* static initializer (debugobjects) */
-	WORK_STRUCT_COLOR_SHIFT	= 5,	/* color for workqueue flushing */
-#else
-	WORK_STRUCT_COLOR_SHIFT	= 4,	/* color for workqueue flushing */
-#endif
-
-	WORK_STRUCT_COLOR_BITS	= 4,
-
-	WORK_STRUCT_PENDING	= 1 << WORK_STRUCT_PENDING_BIT,
-	WORK_STRUCT_DELAYED	= 1 << WORK_STRUCT_DELAYED_BIT,
-	WORK_STRUCT_CWQ		= 1 << WORK_STRUCT_CWQ_BIT,
-	WORK_STRUCT_LINKED	= 1 << WORK_STRUCT_LINKED_BIT,
-#ifdef CONFIG_DEBUG_OBJECTS_WORK
-	WORK_STRUCT_STATIC	= 1 << WORK_STRUCT_STATIC_BIT,
-#else
-	WORK_STRUCT_STATIC	= 0,
-#endif
-
-	/*
-	 * The last color is no color used for works which don't
-	 * participate in workqueue flushing.
-	 */
-	WORK_NR_COLORS		= (1 << WORK_STRUCT_COLOR_BITS) - 1,
-	WORK_NO_COLOR		= WORK_NR_COLORS,
-
-	/* special cpu IDs */
-	WORK_CPU_UNBOUND	= NR_CPUS,
-	WORK_CPU_NONE		= NR_CPUS + 1,
-	WORK_CPU_LAST		= WORK_CPU_NONE,
-
-	/*
-	 * Reserve 7 bits off of cwq pointer w/ debugobjects turned
-	 * off.  This makes cwqs aligned to 256 bytes and allows 15
-	 * workqueue flush colors.
-	 */
-	WORK_STRUCT_FLAG_BITS	= WORK_STRUCT_COLOR_SHIFT +
-				  WORK_STRUCT_COLOR_BITS,
-
-	WORK_STRUCT_FLAG_MASK	= (1UL << WORK_STRUCT_FLAG_BITS) - 1,
-	WORK_STRUCT_WQ_DATA_MASK = ~WORK_STRUCT_FLAG_MASK,
-	WORK_STRUCT_NO_CPU	= WORK_CPU_NONE << WORK_STRUCT_FLAG_BITS,
-
-	/* bit mask for work_busy() return values */
-	WORK_BUSY_PENDING	= 1 << 0,
-	WORK_BUSY_RUNNING	= 1 << 1,
-};
-
-struct work_struct {
-	atomic_long_t data;
-	struct list_head entry;
-	work_func_t func;
-#ifdef CONFIG_LOCKDEP
-	struct lockdep_map lockdep_map;
-#endif
-};
-
-#define WORK_DATA_INIT()	ATOMIC_LONG_INIT(WORK_STRUCT_NO_CPU)
-#define WORK_DATA_STATIC_INIT()	\
-	ATOMIC_LONG_INIT(WORK_STRUCT_NO_CPU | WORK_STRUCT_STATIC)
-
-struct delayed_work {
-	struct work_struct work;
-	struct timer_list timer;
-};
-
-static inline struct delayed_work *to_delayed_work(struct work_struct *work)
-{
-	return container_of(work, struct delayed_work, work);
-}
-
-struct execute_work {
-	struct work_struct work;
-};
-
-#ifdef CONFIG_LOCKDEP
-/*
- * NB: because we have to copy the lockdep_map, setting _key
- * here is required, otherwise it could get initialised to the
- * copy of the lockdep_map!
- */
-#define __WORK_INIT_LOCKDEP_MAP(n, k) \
-	.lockdep_map = STATIC_LOCKDEP_MAP_INIT(n, k),
-#else
-#define __WORK_INIT_LOCKDEP_MAP(n, k)
-#endif
-
-#define __WORK_INITIALIZER(n, f) {				\
-	.data = WORK_DATA_STATIC_INIT(),			\
-	.entry	= { &(n).entry, &(n).entry },			\
-	.func = (f),						\
-	__WORK_INIT_LOCKDEP_MAP(#n, &(n))			\
-	}
-
-#define __DELAYED_WORK_INITIALIZER(n, f) {			\
-	.work = __WORK_INITIALIZER((n).work, (f)),		\
-	.timer = TIMER_INITIALIZER(NULL, 0, 0),			\
-	}
-
-#define __DEFERRED_WORK_INITIALIZER(n, f) {			\
-	.work = __WORK_INITIALIZER((n).work, (f)),		\
-	.timer = TIMER_DEFERRED_INITIALIZER(NULL, 0, 0),	\
-	}
-
-#define DECLARE_WORK(n, f)					\
-	struct work_struct n = __WORK_INITIALIZER(n, f)
-
-#define DECLARE_DELAYED_WORK(n, f)				\
-	struct delayed_work n = __DELAYED_WORK_INITIALIZER(n, f)
-
-#define DECLARE_DEFERRED_WORK(n, f)				\
-	struct delayed_work n = __DEFERRED_WORK_INITIALIZER(n, f)
-
-/*
- * initialize a work item's function pointer
- */
-#define PREPARE_WORK(_work, _func)				\
-	do {							\
-		(_work)->func = (_func);			\
-	} while (0)
-
-#define PREPARE_DELAYED_WORK(_work, _func)			\
-	PREPARE_WORK(&(_work)->work, (_func))
-
-#ifdef CONFIG_DEBUG_OBJECTS_WORK
-extern void __init_work(struct work_struct *work, int onstack);
-extern void destroy_work_on_stack(struct work_struct *work);
-static inline unsigned int work_static(struct work_struct *work)
-{
-	return *work_data_bits(work) & WORK_STRUCT_STATIC;
-}
-#else
-static inline void __init_work(struct work_struct *work, int onstack) { }
-static inline void destroy_work_on_stack(struct work_struct *work) { }
-static inline unsigned int work_static(struct work_struct *work) { return 0; }
-#endif
-
-/*
- * initialize all of a work item in one go
- *
- * NOTE! No point in using "atomic_long_set()": using a direct
- * assignment of the work data initializer allows the compiler
- * to generate better code.
- */
-#ifdef CONFIG_LOCKDEP
-#define __INIT_WORK(_work, _func, _onstack)				\
-	do {								\
-		static struct lock_class_key __key;			\
-									\
-		__init_work((_work), _onstack);				\
-		(_work)->data = (atomic_long_t) WORK_DATA_INIT();	\
-		lockdep_init_map(&(_work)->lockdep_map, #_work, &__key, 0);\
-		INIT_LIST_HEAD(&(_work)->entry);			\
-		PREPARE_WORK((_work), (_func));				\
-	} while (0)
-#else
-#define __INIT_WORK(_work, _func, _onstack)				\
-	do {								\
-		__init_work((_work), _onstack);				\
-		(_work)->data = (atomic_long_t) WORK_DATA_INIT();	\
-		INIT_LIST_HEAD(&(_work)->entry);			\
-		PREPARE_WORK((_work), (_func));				\
-	} while (0)
-#endif
-
-#define INIT_WORK(_work, _func)					\
-	do {							\
-		__INIT_WORK((_work), (_func), 0);		\
-	} while (0)
-
-#define INIT_WORK_ONSTACK(_work, _func)				\
-	do {							\
-		__INIT_WORK((_work), (_func), 1);		\
-	} while (0)
-
-#define INIT_DELAYED_WORK(_work, _func)				\
-	do {							\
-		INIT_WORK(&(_work)->work, (_func));		\
-		init_timer(&(_work)->timer);			\
-	} while (0)
-
-#define INIT_DELAYED_WORK_ONSTACK(_work, _func)			\
-	do {							\
-		INIT_WORK_ONSTACK(&(_work)->work, (_func));	\
-		init_timer_on_stack(&(_work)->timer);		\
-	} while (0)
-
-#define INIT_DELAYED_WORK_DEFERRABLE(_work, _func)		\
-	do {							\
-		INIT_WORK(&(_work)->work, (_func));		\
-		init_timer_deferrable(&(_work)->timer);		\
-	} while (0)
-
-/**
- * work_pending - Find out whether a work item is currently pending
- * @work: The work item in question
- */
-#define work_pending(work) \
-	test_bit(WORK_STRUCT_PENDING_BIT, work_data_bits(work))
-
-/**
- * delayed_work_pending - Find out whether a delayable work item is currently
- * pending
- * @work: The work item in question
- */
-#define delayed_work_pending(w) \
-	work_pending(&(w)->work)
-
-/**
- * work_clear_pending - for internal use only, mark a work item as not pending
- * @work: The work item in question
- */
-#define work_clear_pending(work) \
-	clear_bit(WORK_STRUCT_PENDING_BIT, work_data_bits(work))
-
-/*
- * Workqueue flags and constants.  For details, please refer to
- * Documentation/workqueue.txt.
- */
-enum {
-	WQ_NON_REENTRANT	= 1 << 0, /* guarantee non-reentrance */
-	WQ_UNBOUND		= 1 << 1, /* not bound to any cpu */
-	WQ_FREEZABLE		= 1 << 2, /* freeze during suspend */
-	WQ_MEM_RECLAIM		= 1 << 3, /* may be used for memory reclaim */
-	WQ_HIGHPRI		= 1 << 4, /* high priority */
-	WQ_CPU_INTENSIVE	= 1 << 5, /* cpu instensive workqueue */
-
-	WQ_DRAINING		= 1 << 6, /* internal: workqueue is draining */
-	WQ_RESCUER		= 1 << 7, /* internal: workqueue has rescuer */
-
-	WQ_MAX_ACTIVE		= 512,	  /* I like 512, better ideas? */
-	WQ_MAX_UNBOUND_PER_CPU	= 4,	  /* 4 * #cpus for unbound wq */
-	WQ_DFL_ACTIVE		= WQ_MAX_ACTIVE / 2,
-};
-
-/* unbound wq's aren't per-cpu, scale max_active according to #cpus */
-#define WQ_UNBOUND_MAX_ACTIVE	\
-	max_t(int, WQ_MAX_ACTIVE, num_possible_cpus() * WQ_MAX_UNBOUND_PER_CPU)
-
-/*
- * System-wide workqueues which are always present.
- *
- * system_wq is the one used by schedule[_delayed]_work[_on]().
- * Multi-CPU multi-threaded.  There are users which expect relatively
- * short queue flush time.  Don't queue works which can run for too
- * long.
- *
- * system_long_wq is similar to system_wq but may host long running
- * works.  Queue flushing might take relatively long.
- *
- * system_nrt_wq is non-reentrant and guarantees that any given work
- * item is never executed in parallel by multiple CPUs.  Queue
- * flushing might take relatively long.
- *
- * system_unbound_wq is unbound workqueue.  Workers are not bound to
- * any specific CPU, not concurrency managed, and all queued works are
- * executed immediately as long as max_active limit is not reached and
- * resources are available.
- *
- * system_freezable_wq is equivalent to system_wq except that it's
- * freezable.
- *
- * system_nrt_freezable_wq is equivalent to system_nrt_wq except that
- * it's freezable.
- */
-extern struct workqueue_struct *system_wq;
-extern struct workqueue_struct *system_long_wq;
-extern struct workqueue_struct *system_nrt_wq;
-extern struct workqueue_struct *system_unbound_wq;
-extern struct workqueue_struct *system_freezable_wq;
-extern struct workqueue_struct *system_nrt_freezable_wq;
-
-extern struct workqueue_struct *
-__alloc_workqueue_key(const char *fmt, unsigned int flags, int max_active,
-	struct lock_class_key *key, const char *lock_name, ...) __printf(1, 6);
-
-/**
- * alloc_workqueue - allocate a workqueue
- * @fmt: printf format for the name of the workqueue
- * @flags: WQ_* flags
- * @max_active: max in-flight work items, 0 for default
- * @args: args for @fmt
- *
- * Allocate a workqueue with the specified parameters.  For detailed
- * information on WQ_* flags, please refer to Documentation/workqueue.txt.
- *
- * The __lock_name macro dance is to guarantee that single lock_class_key
- * doesn't end up with different namesm, which isn't allowed by lockdep.
- *
- * RETURNS:
- * Pointer to the allocated workqueue on success, %NULL on failure.
- */
-#ifdef CONFIG_LOCKDEP
-#define alloc_workqueue(fmt, flags, max_active, args...)	\
-({								\
-	static struct lock_class_key __key;			\
-	const char *__lock_name;				\
-								\
-	if (__builtin_constant_p(fmt))				\
-		__lock_name = (fmt);				\
-	else							\
-		__lock_name = #fmt;				\
-								\
-	__alloc_workqueue_key((fmt), (flags), (max_active),	\
-			      &__key, __lock_name, ##args);	\
-})
-#else
-#define alloc_workqueue(fmt, flags, max_active, args...)	\
-	__alloc_workqueue_key((fmt), (flags), (max_active),	\
-			      NULL, NULL, ##args)
-#endif
-
-/**
- * alloc_ordered_workqueue - allocate an ordered workqueue
- * @fmt: printf format for the name of the workqueue
- * @flags: WQ_* flags (only WQ_FREEZABLE and WQ_MEM_RECLAIM are meaningful)
- * @args: args for @fmt
- *
- * Allocate an ordered workqueue.  An ordered workqueue executes at
- * most one work item at any given time in the queued order.  They are
- * implemented as unbound workqueues with @max_active of one.
- *
- * RETURNS:
- * Pointer to the allocated workqueue on success, %NULL on failure.
- */
-#define alloc_ordered_workqueue(fmt, flags, args...)		\
-	alloc_workqueue(fmt, WQ_UNBOUND | (flags), 1, ##args)
-
-#define create_workqueue(name)					\
-	alloc_workqueue((name), WQ_MEM_RECLAIM, 1)
-#define create_freezable_workqueue(name)			\
-	alloc_workqueue((name), WQ_FREEZABLE | WQ_UNBOUND | WQ_MEM_RECLAIM, 1)
-#define create_singlethread_workqueue(name)			\
-	alloc_workqueue((name), WQ_UNBOUND | WQ_MEM_RECLAIM, 1)
-
-extern void destroy_workqueue(struct workqueue_struct *wq);
-
-extern int queue_work(struct workqueue_struct *wq, struct work_struct *work);
-extern int queue_work_on(int cpu, struct workqueue_struct *wq,
-			struct work_struct *work);
-extern int queue_delayed_work(struct workqueue_struct *wq,
-			struct delayed_work *work, unsigned long delay);
-extern int queue_delayed_work_on(int cpu, struct workqueue_struct *wq,
-			struct delayed_work *work, unsigned long delay);
-
-extern void flush_workqueue(struct workqueue_struct *wq);
-extern void drain_workqueue(struct workqueue_struct *wq);
-extern void flush_scheduled_work(void);
-
-extern int schedule_work(struct work_struct *work);
-extern int schedule_work_on(int cpu, struct work_struct *work);
-extern int schedule_delayed_work(struct delayed_work *work, unsigned long delay);
-extern int schedule_delayed_work_on(int cpu, struct delayed_work *work,
-					unsigned long delay);
-extern int schedule_on_each_cpu(work_func_t func);
-extern int keventd_up(void);
-
-int execute_in_process_context(work_func_t fn, struct execute_work *);
-
-extern bool flush_work(struct work_struct *work);
-extern bool flush_work_sync(struct work_struct *work);
-extern bool cancel_work_sync(struct work_struct *work);
-
-extern bool flush_delayed_work(struct delayed_work *dwork);
-extern bool flush_delayed_work_sync(struct delayed_work *work);
-extern bool cancel_delayed_work_sync(struct delayed_work *dwork);
-
-extern void workqueue_set_max_active(struct workqueue_struct *wq,
-				     int max_active);
-extern bool workqueue_congested(unsigned int cpu, struct workqueue_struct *wq);
-extern unsigned int work_cpu(struct work_struct *work);
-extern unsigned int work_busy(struct work_struct *work);
-
-/*
- * Kill off a pending schedule_delayed_work().  Note that the work callback
- * function may still be running on return from cancel_delayed_work(), unless
- * it returns 1 and the work doesn't re-arm itself. Run flush_workqueue() or
- * cancel_work_sync() to wait on it.
- */
-static inline bool cancel_delayed_work(struct delayed_work *work)
-{
-	bool ret;
-
-	ret = del_timer_sync(&work->timer);
-	if (ret)
-		work_clear_pending(&work->work);
-	return ret;
-}
-
-/*
- * Like above, but uses del_timer() instead of del_timer_sync(). This means,
- * if it returns 0 the timer function may be running and the queueing is in
- * progress.
- */
-static inline bool __cancel_delayed_work(struct delayed_work *work)
-{
-	bool ret;
-
-	ret = del_timer(&work->timer);
-	if (ret)
-		work_clear_pending(&work->work);
-	return ret;
-}
-
-#ifndef CONFIG_SMP
-static inline long work_on_cpu(unsigned int cpu, long (*fn)(void *), void *arg)
-{
-	return fn(arg);
-}
-#else
-long work_on_cpu(unsigned int cpu, long (*fn)(void *), void *arg);
-#endif /* CONFIG_SMP */
-
-#ifdef CONFIG_FREEZER
-extern void freeze_workqueues_begin(void);
-extern bool freeze_workqueues_busy(void);
-extern void thaw_workqueues(void);
-#endif /* CONFIG_FREEZER */
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/writeback.h b/ANDROID_3.4.5/include/linux/writeback.h
deleted file mode 100644
index a2b84f59..00000000
--- a/ANDROID_3.4.5/include/linux/writeback.h
+++ /dev/null
@@ -1,201 +0,0 @@
-/*
- * include/linux/writeback.h
- */
-#ifndef WRITEBACK_H
-#define WRITEBACK_H
-
-#include <linux/sched.h>
-#include <linux/fs.h>
-
-DECLARE_PER_CPU(int, dirty_throttle_leaks);
-
-/*
- * The 1/4 region under the global dirty thresh is for smooth dirty throttling:
- *
- *	(thresh - thresh/DIRTY_FULL_SCOPE, thresh)
- *
- * Further beyond, all dirtier tasks will enter a loop waiting (possibly long
- * time) for the dirty pages to drop, unless written enough pages.
- *
- * The global dirty threshold is normally equal to the global dirty limit,
- * except when the system suddenly allocates a lot of anonymous memory and
- * knocks down the global dirty threshold quickly, in which case the global
- * dirty limit will follow down slowly to prevent livelocking all dirtier tasks.
- */
-#define DIRTY_SCOPE		8
-#define DIRTY_FULL_SCOPE	(DIRTY_SCOPE / 2)
-
-struct backing_dev_info;
-
-/*
- * fs/fs-writeback.c
- */
-enum writeback_sync_modes {
-	WB_SYNC_NONE,	/* Don't wait on anything */
-	WB_SYNC_ALL,	/* Wait on every mapping */
-};
-
-/*
- * why some writeback work was initiated
- */
-enum wb_reason {
-	WB_REASON_BACKGROUND,
-	WB_REASON_TRY_TO_FREE_PAGES,
-	WB_REASON_SYNC,
-	WB_REASON_PERIODIC,
-	WB_REASON_LAPTOP_TIMER,
-	WB_REASON_FREE_MORE_MEM,
-	WB_REASON_FS_FREE_SPACE,
-	WB_REASON_FORKER_THREAD,
-
-	WB_REASON_MAX,
-};
-extern const char *wb_reason_name[];
-
-/*
- * A control structure which tells the writeback code what to do.  These are
- * always on the stack, and hence need no locking.  They are always initialised
- * in a manner such that unspecified fields are set to zero.
- */
-struct writeback_control {
-	enum writeback_sync_modes sync_mode;
-	long nr_to_write;		/* Write this many pages, and decrement
-					   this for each page written */
-	long pages_skipped;		/* Pages which were not written */
-
-	/*
-	 * For a_ops->writepages(): if start or end are non-zero then this is
-	 * a hint that the filesystem need only write out the pages inside that
-	 * byterange.  The byte at `end' is included in the writeout request.
-	 */
-	loff_t range_start;
-	loff_t range_end;
-
-	unsigned for_kupdate:1;		/* A kupdate writeback */
-	unsigned for_background:1;	/* A background writeback */
-	unsigned tagged_writepages:1;	/* tag-and-write to avoid livelock */
-	unsigned for_reclaim:1;		/* Invoked from the page allocator */
-	unsigned range_cyclic:1;	/* range_start is cyclic */
-};
-
-/*
- * fs/fs-writeback.c
- */	
-struct bdi_writeback;
-int inode_wait(void *);
-void writeback_inodes_sb(struct super_block *, enum wb_reason reason);
-void writeback_inodes_sb_nr(struct super_block *, unsigned long nr,
-							enum wb_reason reason);
-int writeback_inodes_sb_if_idle(struct super_block *, enum wb_reason reason);
-int writeback_inodes_sb_nr_if_idle(struct super_block *, unsigned long nr,
-							enum wb_reason reason);
-void sync_inodes_sb(struct super_block *);
-long writeback_inodes_wb(struct bdi_writeback *wb, long nr_pages,
-				enum wb_reason reason);
-long wb_do_writeback(struct bdi_writeback *wb, int force_wait);
-void wakeup_flusher_threads(long nr_pages, enum wb_reason reason);
-
-/* writeback.h requires fs.h; it, too, is not included from here. */
-static inline void wait_on_inode(struct inode *inode)
-{
-	might_sleep();
-	wait_on_bit(&inode->i_state, __I_NEW, inode_wait, TASK_UNINTERRUPTIBLE);
-}
-static inline void inode_sync_wait(struct inode *inode)
-{
-	might_sleep();
-	wait_on_bit(&inode->i_state, __I_SYNC, inode_wait,
-							TASK_UNINTERRUPTIBLE);
-}
-
-
-/*
- * mm/page-writeback.c
- */
-#ifdef CONFIG_BLOCK
-void laptop_io_completion(struct backing_dev_info *info);
-void laptop_sync_completion(void);
-void laptop_mode_sync(struct work_struct *work);
-void laptop_mode_timer_fn(unsigned long data);
-#else
-static inline void laptop_sync_completion(void) { }
-#endif
-void throttle_vm_writeout(gfp_t gfp_mask);
-bool zone_dirty_ok(struct zone *zone);
-
-extern unsigned long global_dirty_limit;
-
-/* These are exported to sysctl. */
-extern int dirty_background_ratio;
-extern unsigned long dirty_background_bytes;
-extern int vm_dirty_ratio;
-extern unsigned long vm_dirty_bytes;
-extern unsigned int dirty_writeback_interval;
-extern unsigned int dirty_expire_interval;
-extern int vm_highmem_is_dirtyable;
-extern int block_dump;
-extern int laptop_mode;
-
-extern int dirty_background_ratio_handler(struct ctl_table *table, int write,
-		void __user *buffer, size_t *lenp,
-		loff_t *ppos);
-extern int dirty_background_bytes_handler(struct ctl_table *table, int write,
-		void __user *buffer, size_t *lenp,
-		loff_t *ppos);
-extern int dirty_ratio_handler(struct ctl_table *table, int write,
-		void __user *buffer, size_t *lenp,
-		loff_t *ppos);
-extern int dirty_bytes_handler(struct ctl_table *table, int write,
-		void __user *buffer, size_t *lenp,
-		loff_t *ppos);
-
-struct ctl_table;
-int dirty_writeback_centisecs_handler(struct ctl_table *, int,
-				      void __user *, size_t *, loff_t *);
-
-void global_dirty_limits(unsigned long *pbackground, unsigned long *pdirty);
-unsigned long bdi_dirty_limit(struct backing_dev_info *bdi,
-			       unsigned long dirty);
-
-void __bdi_update_bandwidth(struct backing_dev_info *bdi,
-			    unsigned long thresh,
-			    unsigned long bg_thresh,
-			    unsigned long dirty,
-			    unsigned long bdi_thresh,
-			    unsigned long bdi_dirty,
-			    unsigned long start_time);
-
-void page_writeback_init(void);
-void balance_dirty_pages_ratelimited_nr(struct address_space *mapping,
-					unsigned long nr_pages_dirtied);
-
-static inline void
-balance_dirty_pages_ratelimited(struct address_space *mapping)
-{
-	balance_dirty_pages_ratelimited_nr(mapping, 1);
-}
-
-typedef int (*writepage_t)(struct page *page, struct writeback_control *wbc,
-				void *data);
-
-int generic_writepages(struct address_space *mapping,
-		       struct writeback_control *wbc);
-void tag_pages_for_writeback(struct address_space *mapping,
-			     pgoff_t start, pgoff_t end);
-int write_cache_pages(struct address_space *mapping,
-		      struct writeback_control *wbc, writepage_t writepage,
-		      void *data);
-int do_writepages(struct address_space *mapping, struct writeback_control *wbc);
-void set_page_dirty_balance(struct page *page, int page_mkwrite);
-void writeback_set_ratelimit(void);
-void tag_pages_for_writeback(struct address_space *mapping,
-			     pgoff_t start, pgoff_t end);
-
-void account_page_redirty(struct page *page);
-
-/* pdflush.c */
-extern int nr_pdflush_threads;	/* Global so it can be exported to sysctl
-				   read-only. */
-
-
-#endif		/* WRITEBACK_H */
diff --git a/ANDROID_3.4.5/include/linux/x25.h b/ANDROID_3.4.5/include/linux/x25.h
deleted file mode 100644
index 810cce67..00000000
--- a/ANDROID_3.4.5/include/linux/x25.h
+++ /dev/null
@@ -1,152 +0,0 @@
-/*
- * These are the public elements of the Linux kernel X.25 implementation.
- *
- * 	History
- *	mar/20/00	Daniela Squassoni Disabling/enabling of facilities 
- *					  negotiation.
- *	apr/02/05	Shaun Pereira Selective sub address matching with
- *					call user data
- */
-
-#ifndef	X25_KERNEL_H
-#define	X25_KERNEL_H
-
-#include <linux/types.h>
-#include <linux/socket.h>
-
-#define	SIOCX25GSUBSCRIP	(SIOCPROTOPRIVATE + 0)
-#define	SIOCX25SSUBSCRIP	(SIOCPROTOPRIVATE + 1)
-#define	SIOCX25GFACILITIES	(SIOCPROTOPRIVATE + 2)
-#define	SIOCX25SFACILITIES	(SIOCPROTOPRIVATE + 3)
-#define	SIOCX25GCALLUSERDATA	(SIOCPROTOPRIVATE + 4)
-#define	SIOCX25SCALLUSERDATA	(SIOCPROTOPRIVATE + 5)
-#define	SIOCX25GCAUSEDIAG	(SIOCPROTOPRIVATE + 6)
-#define SIOCX25SCUDMATCHLEN	(SIOCPROTOPRIVATE + 7)
-#define SIOCX25CALLACCPTAPPRV   (SIOCPROTOPRIVATE + 8)
-#define SIOCX25SENDCALLACCPT    (SIOCPROTOPRIVATE + 9)
-#define SIOCX25GDTEFACILITIES (SIOCPROTOPRIVATE + 10)
-#define SIOCX25SDTEFACILITIES (SIOCPROTOPRIVATE + 11)
-#define SIOCX25SCAUSEDIAG	(SIOCPROTOPRIVATE + 12)
-
-/*
- *	Values for {get,set}sockopt.
- */
-#define	X25_QBITINCL		1
-
-/*
- *	X.25 Packet Size values.
- */
-#define	X25_PS16		4
-#define	X25_PS32		5
-#define	X25_PS64		6
-#define	X25_PS128		7
-#define	X25_PS256		8
-#define	X25_PS512		9
-#define	X25_PS1024		10
-#define	X25_PS2048		11
-#define	X25_PS4096		12
-
-/*
- * An X.121 address, it is held as ASCII text, null terminated, up to 15
- * digits and a null terminator.
- */
-struct x25_address {
-	char x25_addr[16];
-};
-
-/*
- *	Linux X.25 Address structure, used for bind, and connect mostly.
- */
-struct sockaddr_x25 {
-	__kernel_sa_family_t sx25_family;	/* Must be AF_X25 */
-	struct x25_address sx25_addr;		/* X.121 Address */
-};
-
-/*
- *	DTE/DCE subscription options.
- *
- *      As this is missing lots of options, user should expect major
- *	changes of this structure in 2.5.x which might break compatibilty.
- *      The somewhat ugly dimension 200-sizeof() is needed to maintain
- *	backward compatibility.
- */
-struct x25_subscrip_struct {
-	char device[200-sizeof(unsigned long)];
-	unsigned long	global_facil_mask;	/* 0 to disable negotiation */
-	unsigned int	extended;
-};
-
-/* values for above global_facil_mask */
-
-#define	X25_MASK_REVERSE	0x01	
-#define	X25_MASK_THROUGHPUT	0x02
-#define	X25_MASK_PACKET_SIZE	0x04
-#define	X25_MASK_WINDOW_SIZE	0x08
-
-#define X25_MASK_CALLING_AE 0x10
-#define X25_MASK_CALLED_AE 0x20
-
-
-/*
- *	Routing table control structure.
- */
-struct x25_route_struct {
-	struct x25_address address;
-	unsigned int	   sigdigits;
-	char		   device[200];
-};
-
-/*
- *	Facilities structure.
- */
-struct x25_facilities {
-	unsigned int	winsize_in, winsize_out;
-	unsigned int	pacsize_in, pacsize_out;
-	unsigned int	throughput;
-	unsigned int	reverse;
-};
-
-/*
-* ITU DTE facilities
-* Only the called and calling address
-* extension are currently implemented.
-* The rest are in place to avoid the struct
-* changing size if someone needs them later
-*/
-
-struct x25_dte_facilities {
-	__u16 delay_cumul;
-	__u16 delay_target;
-	__u16 delay_max;
-	__u8 min_throughput;
-	__u8 expedited;
-	__u8 calling_len;
-	__u8 called_len;
-	__u8 calling_ae[20];
-	__u8 called_ae[20];
-};
-
-/*
- *	Call User Data structure.
- */
-struct x25_calluserdata {
-	unsigned int	cudlength;
-	unsigned char	cuddata[128];
-};
-
-/*
- *	Call clearing Cause and Diagnostic structure.
- */
-struct x25_causediag {
-	unsigned char	cause;
-	unsigned char	diagnostic;
-};
-
-/*
- *	Further optional call user data match length selection
- */
-struct x25_subaddr {
-	unsigned int cudmatchlength;
-};
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/xattr.h b/ANDROID_3.4.5/include/linux/xattr.h
deleted file mode 100644
index e5d12203..00000000
--- a/ANDROID_3.4.5/include/linux/xattr.h
+++ /dev/null
@@ -1,101 +0,0 @@
-/*
-  File: linux/xattr.h
-
-  Extended attributes handling.
-
-  Copyright (C) 2001 by Andreas Gruenbacher <a.gruenbacher@computer.org>
-  Copyright (c) 2001-2002 Silicon Graphics, Inc.  All Rights Reserved.
-  Copyright (c) 2004 Red Hat, Inc., James Morris <jmorris@redhat.com>
-*/
-#ifndef _LINUX_XATTR_H
-#define _LINUX_XATTR_H
-
-#define XATTR_CREATE	0x1	/* set value, fail if attr already exists */
-#define XATTR_REPLACE	0x2	/* set value, fail if attr does not exist */
-
-/* Namespaces */
-#define XATTR_OS2_PREFIX "os2."
-#define XATTR_OS2_PREFIX_LEN (sizeof (XATTR_OS2_PREFIX) - 1)
-
-#define XATTR_SECURITY_PREFIX	"security."
-#define XATTR_SECURITY_PREFIX_LEN (sizeof (XATTR_SECURITY_PREFIX) - 1)
-
-#define XATTR_SYSTEM_PREFIX "system."
-#define XATTR_SYSTEM_PREFIX_LEN (sizeof (XATTR_SYSTEM_PREFIX) - 1)
-
-#define XATTR_TRUSTED_PREFIX "trusted."
-#define XATTR_TRUSTED_PREFIX_LEN (sizeof (XATTR_TRUSTED_PREFIX) - 1)
-
-#define XATTR_USER_PREFIX "user."
-#define XATTR_USER_PREFIX_LEN (sizeof (XATTR_USER_PREFIX) - 1)
-
-/* Security namespace */
-#define XATTR_EVM_SUFFIX "evm"
-#define XATTR_NAME_EVM XATTR_SECURITY_PREFIX XATTR_EVM_SUFFIX
-
-#define XATTR_SELINUX_SUFFIX "selinux"
-#define XATTR_NAME_SELINUX XATTR_SECURITY_PREFIX XATTR_SELINUX_SUFFIX
-
-#define XATTR_SMACK_SUFFIX "SMACK64"
-#define XATTR_SMACK_IPIN "SMACK64IPIN"
-#define XATTR_SMACK_IPOUT "SMACK64IPOUT"
-#define XATTR_SMACK_EXEC "SMACK64EXEC"
-#define XATTR_SMACK_TRANSMUTE "SMACK64TRANSMUTE"
-#define XATTR_SMACK_MMAP "SMACK64MMAP"
-#define XATTR_NAME_SMACK XATTR_SECURITY_PREFIX XATTR_SMACK_SUFFIX
-#define XATTR_NAME_SMACKIPIN	XATTR_SECURITY_PREFIX XATTR_SMACK_IPIN
-#define XATTR_NAME_SMACKIPOUT	XATTR_SECURITY_PREFIX XATTR_SMACK_IPOUT
-#define XATTR_NAME_SMACKEXEC	XATTR_SECURITY_PREFIX XATTR_SMACK_EXEC
-#define XATTR_NAME_SMACKTRANSMUTE XATTR_SECURITY_PREFIX XATTR_SMACK_TRANSMUTE
-#define XATTR_NAME_SMACKMMAP XATTR_SECURITY_PREFIX XATTR_SMACK_MMAP
-
-#define XATTR_CAPS_SUFFIX "capability"
-#define XATTR_NAME_CAPS XATTR_SECURITY_PREFIX XATTR_CAPS_SUFFIX
-
-#define XATTR_POSIX_ACL_ACCESS  "posix_acl_access"
-#define XATTR_NAME_POSIX_ACL_ACCESS XATTR_SYSTEM_PREFIX XATTR_POSIX_ACL_ACCESS
-#define XATTR_POSIX_ACL_DEFAULT  "posix_acl_default"
-#define XATTR_NAME_POSIX_ACL_DEFAULT XATTR_SYSTEM_PREFIX XATTR_POSIX_ACL_DEFAULT
-
-#ifdef  __KERNEL__
-
-#include <linux/types.h>
-
-struct inode;
-struct dentry;
-
-struct xattr_handler {
-	const char *prefix;
-	int flags;	/* fs private flags passed back to the handlers */
-	size_t (*list)(struct dentry *dentry, char *list, size_t list_size,
-		       const char *name, size_t name_len, int handler_flags);
-	int (*get)(struct dentry *dentry, const char *name, void *buffer,
-		   size_t size, int handler_flags);
-	int (*set)(struct dentry *dentry, const char *name, const void *buffer,
-		   size_t size, int flags, int handler_flags);
-};
-
-struct xattr {
-	char *name;
-	void *value;
-	size_t value_len;
-};
-
-ssize_t xattr_getsecurity(struct inode *, const char *, void *, size_t);
-ssize_t vfs_getxattr(struct dentry *, const char *, void *, size_t);
-ssize_t vfs_listxattr(struct dentry *d, char *list, size_t size);
-int __vfs_setxattr_noperm(struct dentry *, const char *, const void *, size_t, int);
-int vfs_setxattr(struct dentry *, const char *, const void *, size_t, int);
-int vfs_removexattr(struct dentry *, const char *);
-
-ssize_t generic_getxattr(struct dentry *dentry, const char *name, void *buffer, size_t size);
-ssize_t generic_listxattr(struct dentry *dentry, char *buffer, size_t buffer_size);
-int generic_setxattr(struct dentry *dentry, const char *name, const void *value, size_t size, int flags);
-int generic_removexattr(struct dentry *dentry, const char *name);
-ssize_t vfs_getxattr_alloc(struct dentry *dentry, const char *name,
-			   char **xattr_value, size_t size, gfp_t flags);
-int vfs_xattr_cmp(struct dentry *dentry, const char *xattr_name,
-		  const char *value, size_t size, gfp_t flags);
-#endif  /*  __KERNEL__  */
-
-#endif	/* _LINUX_XATTR_H */
diff --git a/ANDROID_3.4.5/include/linux/xfrm.h b/ANDROID_3.4.5/include/linux/xfrm.h
deleted file mode 100644
index 22e61fdf..00000000
--- a/ANDROID_3.4.5/include/linux/xfrm.h
+++ /dev/null
@@ -1,504 +0,0 @@
-#ifndef _LINUX_XFRM_H
-#define _LINUX_XFRM_H
-
-#include <linux/types.h>
-
-/* All of the structures in this file may not change size as they are
- * passed into the kernel from userspace via netlink sockets.
- */
-
-/* Structure to encapsulate addresses. I do not want to use
- * "standard" structure. My apologies.
- */
-typedef union {
-	__be32		a4;
-	__be32		a6[4];
-} xfrm_address_t;
-
-/* Ident of a specific xfrm_state. It is used on input to lookup
- * the state by (spi,daddr,ah/esp) or to store information about
- * spi, protocol and tunnel address on output.
- */
-struct xfrm_id {
-	xfrm_address_t	daddr;
-	__be32		spi;
-	__u8		proto;
-};
-
-struct xfrm_sec_ctx {
-	__u8	ctx_doi;
-	__u8	ctx_alg;
-	__u16	ctx_len;
-	__u32	ctx_sid;
-	char	ctx_str[0];
-};
-
-/* Security Context Domains of Interpretation */
-#define XFRM_SC_DOI_RESERVED 0
-#define XFRM_SC_DOI_LSM 1
-
-/* Security Context Algorithms */
-#define XFRM_SC_ALG_RESERVED 0
-#define XFRM_SC_ALG_SELINUX 1
-
-/* Selector, used as selector both on policy rules (SPD) and SAs. */
-
-struct xfrm_selector {
-	xfrm_address_t	daddr;
-	xfrm_address_t	saddr;
-	__be16	dport;
-	__be16	dport_mask;
-	__be16	sport;
-	__be16	sport_mask;
-	__u16	family;
-	__u8	prefixlen_d;
-	__u8	prefixlen_s;
-	__u8	proto;
-	int	ifindex;
-	__kernel_uid32_t	user;
-};
-
-#define XFRM_INF (~(__u64)0)
-
-struct xfrm_lifetime_cfg {
-	__u64	soft_byte_limit;
-	__u64	hard_byte_limit;
-	__u64	soft_packet_limit;
-	__u64	hard_packet_limit;
-	__u64	soft_add_expires_seconds;
-	__u64	hard_add_expires_seconds;
-	__u64	soft_use_expires_seconds;
-	__u64	hard_use_expires_seconds;
-};
-
-struct xfrm_lifetime_cur {
-	__u64	bytes;
-	__u64	packets;
-	__u64	add_time;
-	__u64	use_time;
-};
-
-struct xfrm_replay_state {
-	__u32	oseq;
-	__u32	seq;
-	__u32	bitmap;
-};
-
-struct xfrm_replay_state_esn {
-	unsigned int	bmp_len;
-	__u32		oseq;
-	__u32		seq;
-	__u32		oseq_hi;
-	__u32		seq_hi;
-	__u32		replay_window;
-	__u32		bmp[0];
-};
-
-struct xfrm_algo {
-	char		alg_name[64];
-	unsigned int	alg_key_len;    /* in bits */
-	char		alg_key[0];
-};
-
-struct xfrm_algo_auth {
-	char		alg_name[64];
-	unsigned int	alg_key_len;    /* in bits */
-	unsigned int	alg_trunc_len;  /* in bits */
-	char		alg_key[0];
-};
-
-struct xfrm_algo_aead {
-	char		alg_name[64];
-	unsigned int	alg_key_len;	/* in bits */
-	unsigned int	alg_icv_len;	/* in bits */
-	char		alg_key[0];
-};
-
-struct xfrm_stats {
-	__u32	replay_window;
-	__u32	replay;
-	__u32	integrity_failed;
-};
-
-enum {
-	XFRM_POLICY_TYPE_MAIN	= 0,
-	XFRM_POLICY_TYPE_SUB	= 1,
-	XFRM_POLICY_TYPE_MAX	= 2,
-	XFRM_POLICY_TYPE_ANY	= 255
-};
-
-enum {
-	XFRM_POLICY_IN	= 0,
-	XFRM_POLICY_OUT	= 1,
-	XFRM_POLICY_FWD	= 2,
-	XFRM_POLICY_MASK = 3,
-	XFRM_POLICY_MAX	= 3
-};
-
-enum {
-	XFRM_SHARE_ANY,		/* No limitations */
-	XFRM_SHARE_SESSION,	/* For this session only */
-	XFRM_SHARE_USER,	/* For this user only */
-	XFRM_SHARE_UNIQUE	/* Use once */
-};
-
-#define XFRM_MODE_TRANSPORT 0
-#define XFRM_MODE_TUNNEL 1
-#define XFRM_MODE_ROUTEOPTIMIZATION 2
-#define XFRM_MODE_IN_TRIGGER 3
-#define XFRM_MODE_BEET 4
-#define XFRM_MODE_MAX 5
-
-/* Netlink configuration messages.  */
-enum {
-	XFRM_MSG_BASE = 0x10,
-
-	XFRM_MSG_NEWSA = 0x10,
-#define XFRM_MSG_NEWSA XFRM_MSG_NEWSA
-	XFRM_MSG_DELSA,
-#define XFRM_MSG_DELSA XFRM_MSG_DELSA
-	XFRM_MSG_GETSA,
-#define XFRM_MSG_GETSA XFRM_MSG_GETSA
-
-	XFRM_MSG_NEWPOLICY,
-#define XFRM_MSG_NEWPOLICY XFRM_MSG_NEWPOLICY
-	XFRM_MSG_DELPOLICY,
-#define XFRM_MSG_DELPOLICY XFRM_MSG_DELPOLICY
-	XFRM_MSG_GETPOLICY,
-#define XFRM_MSG_GETPOLICY XFRM_MSG_GETPOLICY
-
-	XFRM_MSG_ALLOCSPI,
-#define XFRM_MSG_ALLOCSPI XFRM_MSG_ALLOCSPI
-	XFRM_MSG_ACQUIRE,
-#define XFRM_MSG_ACQUIRE XFRM_MSG_ACQUIRE
-	XFRM_MSG_EXPIRE,
-#define XFRM_MSG_EXPIRE XFRM_MSG_EXPIRE
-
-	XFRM_MSG_UPDPOLICY,
-#define XFRM_MSG_UPDPOLICY XFRM_MSG_UPDPOLICY
-	XFRM_MSG_UPDSA,
-#define XFRM_MSG_UPDSA XFRM_MSG_UPDSA
-
-	XFRM_MSG_POLEXPIRE,
-#define XFRM_MSG_POLEXPIRE XFRM_MSG_POLEXPIRE
-
-	XFRM_MSG_FLUSHSA,
-#define XFRM_MSG_FLUSHSA XFRM_MSG_FLUSHSA
-	XFRM_MSG_FLUSHPOLICY,
-#define XFRM_MSG_FLUSHPOLICY XFRM_MSG_FLUSHPOLICY
-
-	XFRM_MSG_NEWAE,
-#define XFRM_MSG_NEWAE XFRM_MSG_NEWAE
-	XFRM_MSG_GETAE,
-#define XFRM_MSG_GETAE XFRM_MSG_GETAE
-
-	XFRM_MSG_REPORT,
-#define XFRM_MSG_REPORT XFRM_MSG_REPORT
-
-	XFRM_MSG_MIGRATE,
-#define XFRM_MSG_MIGRATE XFRM_MSG_MIGRATE
-
-	XFRM_MSG_NEWSADINFO,
-#define XFRM_MSG_NEWSADINFO XFRM_MSG_NEWSADINFO
-	XFRM_MSG_GETSADINFO,
-#define XFRM_MSG_GETSADINFO XFRM_MSG_GETSADINFO
-
-	XFRM_MSG_NEWSPDINFO,
-#define XFRM_MSG_NEWSPDINFO XFRM_MSG_NEWSPDINFO
-	XFRM_MSG_GETSPDINFO,
-#define XFRM_MSG_GETSPDINFO XFRM_MSG_GETSPDINFO
-
-	XFRM_MSG_MAPPING,
-#define XFRM_MSG_MAPPING XFRM_MSG_MAPPING
-	__XFRM_MSG_MAX
-};
-#define XFRM_MSG_MAX (__XFRM_MSG_MAX - 1)
-
-#define XFRM_NR_MSGTYPES (XFRM_MSG_MAX + 1 - XFRM_MSG_BASE)
-
-/*
- * Generic LSM security context for comunicating to user space
- * NOTE: Same format as sadb_x_sec_ctx
- */
-struct xfrm_user_sec_ctx {
-	__u16			len;
-	__u16			exttype;
-	__u8			ctx_alg;  /* LSMs: e.g., selinux == 1 */
-	__u8			ctx_doi;
-	__u16			ctx_len;
-};
-
-struct xfrm_user_tmpl {
-	struct xfrm_id		id;
-	__u16			family;
-	xfrm_address_t		saddr;
-	__u32			reqid;
-	__u8			mode;
-	__u8			share;
-	__u8			optional;
-	__u32			aalgos;
-	__u32			ealgos;
-	__u32			calgos;
-};
-
-struct xfrm_encap_tmpl {
-	__u16		encap_type;
-	__be16		encap_sport;
-	__be16		encap_dport;
-	xfrm_address_t	encap_oa;
-};
-
-/* AEVENT flags  */
-enum xfrm_ae_ftype_t {
-	XFRM_AE_UNSPEC,
-	XFRM_AE_RTHR=1,	/* replay threshold*/
-	XFRM_AE_RVAL=2, /* replay value */
-	XFRM_AE_LVAL=4, /* lifetime value */
-	XFRM_AE_ETHR=8, /* expiry timer threshold */
-	XFRM_AE_CR=16, /* Event cause is replay update */
-	XFRM_AE_CE=32, /* Event cause is timer expiry */
-	XFRM_AE_CU=64, /* Event cause is policy update */
-	__XFRM_AE_MAX
-
-#define XFRM_AE_MAX (__XFRM_AE_MAX - 1)
-};
-
-struct xfrm_userpolicy_type {
-	__u8		type;
-	__u16		reserved1;
-	__u8		reserved2;
-};
-
-/* Netlink message attributes.  */
-enum xfrm_attr_type_t {
-	XFRMA_UNSPEC,
-	XFRMA_ALG_AUTH,		/* struct xfrm_algo */
-	XFRMA_ALG_CRYPT,	/* struct xfrm_algo */
-	XFRMA_ALG_COMP,		/* struct xfrm_algo */
-	XFRMA_ENCAP,		/* struct xfrm_algo + struct xfrm_encap_tmpl */
-	XFRMA_TMPL,		/* 1 or more struct xfrm_user_tmpl */
-	XFRMA_SA,		/* struct xfrm_usersa_info  */
-	XFRMA_POLICY,		/*struct xfrm_userpolicy_info */
-	XFRMA_SEC_CTX,		/* struct xfrm_sec_ctx */
-	XFRMA_LTIME_VAL,
-	XFRMA_REPLAY_VAL,
-	XFRMA_REPLAY_THRESH,
-	XFRMA_ETIMER_THRESH,
-	XFRMA_SRCADDR,		/* xfrm_address_t */
-	XFRMA_COADDR,		/* xfrm_address_t */
-	XFRMA_LASTUSED,		/* unsigned long  */
-	XFRMA_POLICY_TYPE,	/* struct xfrm_userpolicy_type */
-	XFRMA_MIGRATE,
-	XFRMA_ALG_AEAD,		/* struct xfrm_algo_aead */
-	XFRMA_KMADDRESS,        /* struct xfrm_user_kmaddress */
-	XFRMA_ALG_AUTH_TRUNC,	/* struct xfrm_algo_auth */
-	XFRMA_MARK,		/* struct xfrm_mark */
-	XFRMA_TFCPAD,		/* __u32 */
-	XFRMA_REPLAY_ESN_VAL,	/* struct xfrm_replay_esn */
-	__XFRMA_MAX
-
-#define XFRMA_MAX (__XFRMA_MAX - 1)
-};
-
-struct xfrm_mark {
-	__u32           v; /* value */
-	__u32           m; /* mask */
-};
-
-enum xfrm_sadattr_type_t {
-	XFRMA_SAD_UNSPEC,
-	XFRMA_SAD_CNT,
-	XFRMA_SAD_HINFO,
-	__XFRMA_SAD_MAX
-
-#define XFRMA_SAD_MAX (__XFRMA_SAD_MAX - 1)
-};
-
-struct xfrmu_sadhinfo {
-	__u32 sadhcnt; /* current hash bkts */
-	__u32 sadhmcnt; /* max allowed hash bkts */
-};
-
-enum xfrm_spdattr_type_t {
-	XFRMA_SPD_UNSPEC,
-	XFRMA_SPD_INFO,
-	XFRMA_SPD_HINFO,
-	__XFRMA_SPD_MAX
-
-#define XFRMA_SPD_MAX (__XFRMA_SPD_MAX - 1)
-};
-
-struct xfrmu_spdinfo {
-	__u32 incnt;
-	__u32 outcnt;
-	__u32 fwdcnt;
-	__u32 inscnt;
-	__u32 outscnt;
-	__u32 fwdscnt;
-};
-
-struct xfrmu_spdhinfo {
-	__u32 spdhcnt;
-	__u32 spdhmcnt;
-};
-
-struct xfrm_usersa_info {
-	struct xfrm_selector		sel;
-	struct xfrm_id			id;
-	xfrm_address_t			saddr;
-	struct xfrm_lifetime_cfg	lft;
-	struct xfrm_lifetime_cur	curlft;
-	struct xfrm_stats		stats;
-	__u32				seq;
-	__u32				reqid;
-	__u16				family;
-	__u8				mode;		/* XFRM_MODE_xxx */
-	__u8				replay_window;
-	__u8				flags;
-#define XFRM_STATE_NOECN	1
-#define XFRM_STATE_DECAP_DSCP	2
-#define XFRM_STATE_NOPMTUDISC	4
-#define XFRM_STATE_WILDRECV	8
-#define XFRM_STATE_ICMP		16
-#define XFRM_STATE_AF_UNSPEC	32
-#define XFRM_STATE_ALIGN4	64
-#define XFRM_STATE_ESN		128
-};
-
-struct xfrm_usersa_id {
-	xfrm_address_t			daddr;
-	__be32				spi;
-	__u16				family;
-	__u8				proto;
-};
-
-struct xfrm_aevent_id {
-	struct xfrm_usersa_id		sa_id;
-	xfrm_address_t			saddr;
-	__u32				flags;
-	__u32				reqid;
-};
-
-struct xfrm_userspi_info {
-	struct xfrm_usersa_info		info;
-	__u32				min;
-	__u32				max;
-};
-
-struct xfrm_userpolicy_info {
-	struct xfrm_selector		sel;
-	struct xfrm_lifetime_cfg	lft;
-	struct xfrm_lifetime_cur	curlft;
-	__u32				priority;
-	__u32				index;
-	__u8				dir;
-	__u8				action;
-#define XFRM_POLICY_ALLOW	0
-#define XFRM_POLICY_BLOCK	1
-	__u8				flags;
-#define XFRM_POLICY_LOCALOK	1	/* Allow user to override global policy */
-	/* Automatically expand selector to include matching ICMP payloads. */
-#define XFRM_POLICY_ICMP	2
-	__u8				share;
-};
-
-struct xfrm_userpolicy_id {
-	struct xfrm_selector		sel;
-	__u32				index;
-	__u8				dir;
-};
-
-struct xfrm_user_acquire {
-	struct xfrm_id			id;
-	xfrm_address_t			saddr;
-	struct xfrm_selector		sel;
-	struct xfrm_userpolicy_info	policy;
-	__u32				aalgos;
-	__u32				ealgos;
-	__u32				calgos;
-	__u32				seq;
-};
-
-struct xfrm_user_expire {
-	struct xfrm_usersa_info		state;
-	__u8				hard;
-};
-
-struct xfrm_user_polexpire {
-	struct xfrm_userpolicy_info	pol;
-	__u8				hard;
-};
-
-struct xfrm_usersa_flush {
-	__u8				proto;
-};
-
-struct xfrm_user_report {
-	__u8				proto;
-	struct xfrm_selector		sel;
-};
-
-/* Used by MIGRATE to pass addresses IKE should use to perform
- * SA negotiation with the peer */
-struct xfrm_user_kmaddress {
-	xfrm_address_t                  local;
-	xfrm_address_t                  remote;
-	__u32				reserved;
-	__u16				family;
-};
-
-struct xfrm_user_migrate {
-	xfrm_address_t			old_daddr;
-	xfrm_address_t			old_saddr;
-	xfrm_address_t			new_daddr;
-	xfrm_address_t			new_saddr;
-	__u8				proto;
-	__u8				mode;
-	__u16				reserved;
-	__u32				reqid;
-	__u16				old_family;
-	__u16				new_family;
-};
-
-struct xfrm_user_mapping {
-	struct xfrm_usersa_id		id;
-	__u32				reqid;
-	xfrm_address_t			old_saddr;
-	xfrm_address_t			new_saddr;
-	__be16				old_sport;
-	__be16				new_sport;
-};
-
-#ifndef __KERNEL__
-/* backwards compatibility for userspace */
-#define XFRMGRP_ACQUIRE		1
-#define XFRMGRP_EXPIRE		2
-#define XFRMGRP_SA		4
-#define XFRMGRP_POLICY		8
-#define XFRMGRP_REPORT		0x20
-#endif
-
-enum xfrm_nlgroups {
-	XFRMNLGRP_NONE,
-#define XFRMNLGRP_NONE		XFRMNLGRP_NONE
-	XFRMNLGRP_ACQUIRE,
-#define XFRMNLGRP_ACQUIRE	XFRMNLGRP_ACQUIRE
-	XFRMNLGRP_EXPIRE,
-#define XFRMNLGRP_EXPIRE	XFRMNLGRP_EXPIRE
-	XFRMNLGRP_SA,
-#define XFRMNLGRP_SA		XFRMNLGRP_SA
-	XFRMNLGRP_POLICY,
-#define XFRMNLGRP_POLICY	XFRMNLGRP_POLICY
-	XFRMNLGRP_AEVENTS,
-#define XFRMNLGRP_AEVENTS	XFRMNLGRP_AEVENTS
-	XFRMNLGRP_REPORT,
-#define XFRMNLGRP_REPORT	XFRMNLGRP_REPORT
-	XFRMNLGRP_MIGRATE,
-#define XFRMNLGRP_MIGRATE	XFRMNLGRP_MIGRATE
-	XFRMNLGRP_MAPPING,
-#define XFRMNLGRP_MAPPING	XFRMNLGRP_MAPPING
-	__XFRMNLGRP_MAX
-};
-#define XFRMNLGRP_MAX	(__XFRMNLGRP_MAX - 1)
-
-#endif /* _LINUX_XFRM_H */
diff --git a/ANDROID_3.4.5/include/linux/xilinxfb.h b/ANDROID_3.4.5/include/linux/xilinxfb.h
deleted file mode 100644
index 5a155a96..00000000
--- a/ANDROID_3.4.5/include/linux/xilinxfb.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
- * Platform device data for Xilinx Framebuffer device
- *
- * Copyright 2007 Secret Lab Technologies Ltd.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#ifndef __XILINXFB_H__
-#define __XILINXFB_H__
-
-#include <linux/types.h>
-
-/* ML300/403 reference design framebuffer driver platform data struct */
-struct xilinxfb_platform_data {
-	u32 rotate_screen;	/* Flag to rotate display 180 degrees */
-	u32 screen_height_mm;	/* Physical dimensions of screen in mm */
-	u32 screen_width_mm;
-	u32 xres, yres;		/* resolution of screen in pixels */
-	u32 xvirt, yvirt;	/* resolution of memory buffer */
-
-	/* Physical address of framebuffer memory; If non-zero, driver
-	 * will use provided memory address instead of allocating one from
-	 * the consistent pool. */
-	u32 fb_phys;
-};
-
-#endif  /* __XILINXFB_H__ */
diff --git a/ANDROID_3.4.5/include/linux/xz.h b/ANDROID_3.4.5/include/linux/xz.h
deleted file mode 100644
index 64cffa6d..00000000
--- a/ANDROID_3.4.5/include/linux/xz.h
+++ /dev/null
@@ -1,264 +0,0 @@
-/*
- * XZ decompressor
- *
- * Authors: Lasse Collin <lasse.collin@tukaani.org>
- *          Igor Pavlov <http://7-zip.org/>
- *
- * This file has been put into the public domain.
- * You can do whatever you want with this file.
- */
-
-#ifndef XZ_H
-#define XZ_H
-
-#ifdef __KERNEL__
-#	include <linux/stddef.h>
-#	include <linux/types.h>
-#else
-#	include <stddef.h>
-#	include <stdint.h>
-#endif
-
-/* In Linux, this is used to make extern functions static when needed. */
-#ifndef XZ_EXTERN
-#	define XZ_EXTERN extern
-#endif
-
-/**
- * enum xz_mode - Operation mode
- *
- * @XZ_SINGLE:              Single-call mode. This uses less RAM than
- *                          than multi-call modes, because the LZMA2
- *                          dictionary doesn't need to be allocated as
- *                          part of the decoder state. All required data
- *                          structures are allocated at initialization,
- *                          so xz_dec_run() cannot return XZ_MEM_ERROR.
- * @XZ_PREALLOC:            Multi-call mode with preallocated LZMA2
- *                          dictionary buffer. All data structures are
- *                          allocated at initialization, so xz_dec_run()
- *                          cannot return XZ_MEM_ERROR.
- * @XZ_DYNALLOC:            Multi-call mode. The LZMA2 dictionary is
- *                          allocated once the required size has been
- *                          parsed from the stream headers. If the
- *                          allocation fails, xz_dec_run() will return
- *                          XZ_MEM_ERROR.
- *
- * It is possible to enable support only for a subset of the above
- * modes at compile time by defining XZ_DEC_SINGLE, XZ_DEC_PREALLOC,
- * or XZ_DEC_DYNALLOC. The xz_dec kernel module is always compiled
- * with support for all operation modes, but the preboot code may
- * be built with fewer features to minimize code size.
- */
-enum xz_mode {
-	XZ_SINGLE,
-	XZ_PREALLOC,
-	XZ_DYNALLOC
-};
-
-/**
- * enum xz_ret - Return codes
- * @XZ_OK:                  Everything is OK so far. More input or more
- *                          output space is required to continue. This
- *                          return code is possible only in multi-call mode
- *                          (XZ_PREALLOC or XZ_DYNALLOC).
- * @XZ_STREAM_END:          Operation finished successfully.
- * @XZ_UNSUPPORTED_CHECK:   Integrity check type is not supported. Decoding
- *                          is still possible in multi-call mode by simply
- *                          calling xz_dec_run() again.
- *                          Note that this return value is used only if
- *                          XZ_DEC_ANY_CHECK was defined at build time,
- *                          which is not used in the kernel. Unsupported
- *                          check types return XZ_OPTIONS_ERROR if
- *                          XZ_DEC_ANY_CHECK was not defined at build time.
- * @XZ_MEM_ERROR:           Allocating memory failed. This return code is
- *                          possible only if the decoder was initialized
- *                          with XZ_DYNALLOC. The amount of memory that was
- *                          tried to be allocated was no more than the
- *                          dict_max argument given to xz_dec_init().
- * @XZ_MEMLIMIT_ERROR:      A bigger LZMA2 dictionary would be needed than
- *                          allowed by the dict_max argument given to
- *                          xz_dec_init(). This return value is possible
- *                          only in multi-call mode (XZ_PREALLOC or
- *                          XZ_DYNALLOC); the single-call mode (XZ_SINGLE)
- *                          ignores the dict_max argument.
- * @XZ_FORMAT_ERROR:        File format was not recognized (wrong magic
- *                          bytes).
- * @XZ_OPTIONS_ERROR:       This implementation doesn't support the requested
- *                          compression options. In the decoder this means
- *                          that the header CRC32 matches, but the header
- *                          itself specifies something that we don't support.
- * @XZ_DATA_ERROR:          Compressed data is corrupt.
- * @XZ_BUF_ERROR:           Cannot make any progress. Details are slightly
- *                          different between multi-call and single-call
- *                          mode; more information below.
- *
- * In multi-call mode, XZ_BUF_ERROR is returned when two consecutive calls
- * to XZ code cannot consume any input and cannot produce any new output.
- * This happens when there is no new input available, or the output buffer
- * is full while at least one output byte is still pending. Assuming your
- * code is not buggy, you can get this error only when decoding a compressed
- * stream that is truncated or otherwise corrupt.
- *
- * In single-call mode, XZ_BUF_ERROR is returned only when the output buffer
- * is too small or the compressed input is corrupt in a way that makes the
- * decoder produce more output than the caller expected. When it is
- * (relatively) clear that the compressed input is truncated, XZ_DATA_ERROR
- * is used instead of XZ_BUF_ERROR.
- */
-enum xz_ret {
-	XZ_OK,
-	XZ_STREAM_END,
-	XZ_UNSUPPORTED_CHECK,
-	XZ_MEM_ERROR,
-	XZ_MEMLIMIT_ERROR,
-	XZ_FORMAT_ERROR,
-	XZ_OPTIONS_ERROR,
-	XZ_DATA_ERROR,
-	XZ_BUF_ERROR
-};
-
-/**
- * struct xz_buf - Passing input and output buffers to XZ code
- * @in:         Beginning of the input buffer. This may be NULL if and only
- *              if in_pos is equal to in_size.
- * @in_pos:     Current position in the input buffer. This must not exceed
- *              in_size.
- * @in_size:    Size of the input buffer
- * @out:        Beginning of the output buffer. This may be NULL if and only
- *              if out_pos is equal to out_size.
- * @out_pos:    Current position in the output buffer. This must not exceed
- *              out_size.
- * @out_size:   Size of the output buffer
- *
- * Only the contents of the output buffer from out[out_pos] onward, and
- * the variables in_pos and out_pos are modified by the XZ code.
- */
-struct xz_buf {
-	const uint8_t *in;
-	size_t in_pos;
-	size_t in_size;
-
-	uint8_t *out;
-	size_t out_pos;
-	size_t out_size;
-};
-
-/**
- * struct xz_dec - Opaque type to hold the XZ decoder state
- */
-struct xz_dec;
-
-/**
- * xz_dec_init() - Allocate and initialize a XZ decoder state
- * @mode:       Operation mode
- * @dict_max:   Maximum size of the LZMA2 dictionary (history buffer) for
- *              multi-call decoding. This is ignored in single-call mode
- *              (mode == XZ_SINGLE). LZMA2 dictionary is always 2^n bytes
- *              or 2^n + 2^(n-1) bytes (the latter sizes are less common
- *              in practice), so other values for dict_max don't make sense.
- *              In the kernel, dictionary sizes of 64 KiB, 128 KiB, 256 KiB,
- *              512 KiB, and 1 MiB are probably the only reasonable values,
- *              except for kernel and initramfs images where a bigger
- *              dictionary can be fine and useful.
- *
- * Single-call mode (XZ_SINGLE): xz_dec_run() decodes the whole stream at
- * once. The caller must provide enough output space or the decoding will
- * fail. The output space is used as the dictionary buffer, which is why
- * there is no need to allocate the dictionary as part of the decoder's
- * internal state.
- *
- * Because the output buffer is used as the workspace, streams encoded using
- * a big dictionary are not a problem in single-call mode. It is enough that
- * the output buffer is big enough to hold the actual uncompressed data; it
- * can be smaller than the dictionary size stored in the stream headers.
- *
- * Multi-call mode with preallocated dictionary (XZ_PREALLOC): dict_max bytes
- * of memory is preallocated for the LZMA2 dictionary. This way there is no
- * risk that xz_dec_run() could run out of memory, since xz_dec_run() will
- * never allocate any memory. Instead, if the preallocated dictionary is too
- * small for decoding the given input stream, xz_dec_run() will return
- * XZ_MEMLIMIT_ERROR. Thus, it is important to know what kind of data will be
- * decoded to avoid allocating excessive amount of memory for the dictionary.
- *
- * Multi-call mode with dynamically allocated dictionary (XZ_DYNALLOC):
- * dict_max specifies the maximum allowed dictionary size that xz_dec_run()
- * may allocate once it has parsed the dictionary size from the stream
- * headers. This way excessive allocations can be avoided while still
- * limiting the maximum memory usage to a sane value to prevent running the
- * system out of memory when decompressing streams from untrusted sources.
- *
- * On success, xz_dec_init() returns a pointer to struct xz_dec, which is
- * ready to be used with xz_dec_run(). If memory allocation fails,
- * xz_dec_init() returns NULL.
- */
-XZ_EXTERN struct xz_dec *xz_dec_init(enum xz_mode mode, uint32_t dict_max);
-
-/**
- * xz_dec_run() - Run the XZ decoder
- * @s:          Decoder state allocated using xz_dec_init()
- * @b:          Input and output buffers
- *
- * The possible return values depend on build options and operation mode.
- * See enum xz_ret for details.
- *
- * Note that if an error occurs in single-call mode (return value is not
- * XZ_STREAM_END), b->in_pos and b->out_pos are not modified and the
- * contents of the output buffer from b->out[b->out_pos] onward are
- * undefined. This is true even after XZ_BUF_ERROR, because with some filter
- * chains, there may be a second pass over the output buffer, and this pass
- * cannot be properly done if the output buffer is truncated. Thus, you
- * cannot give the single-call decoder a too small buffer and then expect to
- * get that amount valid data from the beginning of the stream. You must use
- * the multi-call decoder if you don't want to uncompress the whole stream.
- */
-XZ_EXTERN enum xz_ret xz_dec_run(struct xz_dec *s, struct xz_buf *b);
-
-/**
- * xz_dec_reset() - Reset an already allocated decoder state
- * @s:          Decoder state allocated using xz_dec_init()
- *
- * This function can be used to reset the multi-call decoder state without
- * freeing and reallocating memory with xz_dec_end() and xz_dec_init().
- *
- * In single-call mode, xz_dec_reset() is always called in the beginning of
- * xz_dec_run(). Thus, explicit call to xz_dec_reset() is useful only in
- * multi-call mode.
- */
-XZ_EXTERN void xz_dec_reset(struct xz_dec *s);
-
-/**
- * xz_dec_end() - Free the memory allocated for the decoder state
- * @s:          Decoder state allocated using xz_dec_init(). If s is NULL,
- *              this function does nothing.
- */
-XZ_EXTERN void xz_dec_end(struct xz_dec *s);
-
-/*
- * Standalone build (userspace build or in-kernel build for boot time use)
- * needs a CRC32 implementation. For normal in-kernel use, kernel's own
- * CRC32 module is used instead, and users of this module don't need to
- * care about the functions below.
- */
-#ifndef XZ_INTERNAL_CRC32
-#	ifdef __KERNEL__
-#		define XZ_INTERNAL_CRC32 0
-#	else
-#		define XZ_INTERNAL_CRC32 1
-#	endif
-#endif
-
-#if XZ_INTERNAL_CRC32
-/*
- * This must be called before any other xz_* function to initialize
- * the CRC32 lookup table.
- */
-XZ_EXTERN void xz_crc32_init(void);
-
-/*
- * Update CRC32 value using the polynomial from IEEE-802.3. To start a new
- * calculation, the third argument must be zero. To continue the calculation,
- * the previously returned value is passed as the third argument.
- */
-XZ_EXTERN uint32_t xz_crc32(const uint8_t *buf, size_t size, uint32_t crc);
-#endif
-#endif
diff --git a/ANDROID_3.4.5/include/linux/yam.h b/ANDROID_3.4.5/include/linux/yam.h
deleted file mode 100644
index 7fe28228..00000000
--- a/ANDROID_3.4.5/include/linux/yam.h
+++ /dev/null
@@ -1,82 +0,0 @@
-/*****************************************************************************/
-
-/*
- *	yam.h  -- YAM radio modem driver.
- *
- *	Copyright (C) 1998 Frederic Rible F1OAT (frible@teaser.fr)
- *	Adapted from baycom.c driver written by Thomas Sailer (sailer@ife.ee.ethz.ch)
- *
- *	This program is free software; you can redistribute it and/or modify
- *	it under the terms of the GNU General Public License as published by
- *	the Free Software Foundation; either version 2 of the License, or
- *	(at your option) any later version.
- *
- *	This program is distributed in the hope that it will be useful,
- *	but WITHOUT ANY WARRANTY; without even the implied warranty of
- *	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *	GNU General Public License for more details.
- *
- *	You should have received a copy of the GNU General Public License
- *	along with this program; if not, write to the Free Software
- *	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- *  Please note that the GPL allows you to use the driver, NOT the radio.
- *  In order to use the radio, you need a license from the communications
- *  authority of your country.
- *
- *
- */
-
-/*****************************************************************************/
-
-#define SIOCYAMRESERVED	(0)
-#define SIOCYAMSCFG 	(1)	/* Set configuration */
-#define SIOCYAMGCFG 	(2)	/* Get configuration */
-#define SIOCYAMSMCS 	(3)	/* Set mcs data */
-
-#define YAM_IOBASE   (1 << 0)
-#define YAM_IRQ      (1 << 1)
-#define YAM_BITRATE  (1 << 2) /* Bit rate of radio port ->57600 */
-#define YAM_MODE     (1 << 3) /* 0=simplex 1=duplex 2=duplex+tempo */
-#define YAM_HOLDDLY  (1 << 4) /* duplex tempo (sec) */
-#define YAM_TXDELAY  (1 << 5) /* Tx Delay (ms) */
-#define YAM_TXTAIL   (1 << 6) /* Tx Tail  (ms) */
-#define YAM_PERSIST  (1 << 7) /* Persist  (ms) */
-#define YAM_SLOTTIME (1 << 8) /* Slottime (ms) */
-#define YAM_BAUDRATE (1 << 9) /* Baud rate of rs232 port ->115200 */
-
-#define YAM_MAXBITRATE  57600
-#define YAM_MAXBAUDRATE 115200
-#define YAM_MAXMODE     2
-#define YAM_MAXHOLDDLY  99
-#define YAM_MAXTXDELAY  999
-#define YAM_MAXTXTAIL   999
-#define YAM_MAXPERSIST  255
-#define YAM_MAXSLOTTIME 999
-
-#define YAM_FPGA_SIZE	5302
-
-struct yamcfg {
-	unsigned int mask;		/* Mask of commands */
-	unsigned int iobase;	/* IO Base of COM port */
-	unsigned int irq;		/* IRQ of COM port */
-	unsigned int bitrate;	/* Bit rate of radio port */
-	unsigned int baudrate;	/* Baud rate of the RS232 port */
-	unsigned int txdelay;	/* TxDelay */
-	unsigned int txtail;	/* TxTail */
-	unsigned int persist;	/* Persistence */
-	unsigned int slottime;	/* Slottime */
-	unsigned int mode;		/* mode 0 (simp), 1(Dupl), 2(Dupl+delay) */
-	unsigned int holddly;	/* PTT delay in FullDuplex 2 mode */
-};
-
-struct yamdrv_ioctl_cfg {
-	int cmd;
-	struct yamcfg cfg;
-};
-
-struct yamdrv_ioctl_mcs {
-	int cmd;
-	int bitrate;
-	unsigned char bits[YAM_FPGA_SIZE];
-};
diff --git a/ANDROID_3.4.5/include/linux/z2_battery.h b/ANDROID_3.4.5/include/linux/z2_battery.h
deleted file mode 100644
index 7b975040..00000000
--- a/ANDROID_3.4.5/include/linux/z2_battery.h
+++ /dev/null
@@ -1,17 +0,0 @@
-#ifndef _LINUX_Z2_BATTERY_H
-#define _LINUX_Z2_BATTERY_H
-
-struct z2_battery_info {
-	int	 batt_I2C_bus;
-	int	 batt_I2C_addr;
-	int	 batt_I2C_reg;
-	int	 charge_gpio;
-	int	 min_voltage;
-	int	 max_voltage;
-	int	 batt_div;
-	int	 batt_mult;
-	int	 batt_tech;
-	char	*batt_name;
-};
-
-#endif
diff --git a/ANDROID_3.4.5/include/linux/zconf.h b/ANDROID_3.4.5/include/linux/zconf.h
deleted file mode 100644
index 0beb75e3..00000000
--- a/ANDROID_3.4.5/include/linux/zconf.h
+++ /dev/null
@@ -1,57 +0,0 @@
-/* zconf.h -- configuration of the zlib compression library
- * Copyright (C) 1995-1998 Jean-loup Gailly.
- * For conditions of distribution and use, see copyright notice in zlib.h 
- */
-
-/* @(#) $Id$ */
-
-#ifndef _ZCONF_H
-#define _ZCONF_H
-
-/* The memory requirements for deflate are (in bytes):
-            (1 << (windowBits+2)) +  (1 << (memLevel+9))
- that is: 128K for windowBits=15  +  128K for memLevel = 8  (default values)
- plus a few kilobytes for small objects. For example, if you want to reduce
- the default memory requirements from 256K to 128K, compile with
-     make CFLAGS="-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7"
- Of course this will generally degrade compression (there's no free lunch).
-
-   The memory requirements for inflate are (in bytes) 1 << windowBits
- that is, 32K for windowBits=15 (default value) plus a few kilobytes
- for small objects.
-*/
-
-/* Maximum value for memLevel in deflateInit2 */
-#ifndef MAX_MEM_LEVEL
-#  define MAX_MEM_LEVEL 8
-#endif
-
-/* Maximum value for windowBits in deflateInit2 and inflateInit2.
- * WARNING: reducing MAX_WBITS makes minigzip unable to extract .gz files
- * created by gzip. (Files created by minigzip can still be extracted by
- * gzip.)
- */
-#ifndef MAX_WBITS
-#  define MAX_WBITS   15 /* 32K LZ77 window */
-#endif
-
-/* default windowBits for decompression. MAX_WBITS is for compression only */
-#ifndef DEF_WBITS
-#  define DEF_WBITS MAX_WBITS
-#endif
-
-/* default memLevel */
-#if MAX_MEM_LEVEL >= 8
-#  define DEF_MEM_LEVEL 8
-#else
-#  define DEF_MEM_LEVEL  MAX_MEM_LEVEL
-#endif
-
-                        /* Type declarations */
-
-typedef unsigned char  Byte;  /* 8 bits */
-typedef unsigned int   uInt;  /* 16 bits or more */
-typedef unsigned long  uLong; /* 32 bits or more */
-typedef void     *voidp;
-
-#endif /* _ZCONF_H */
diff --git a/ANDROID_3.4.5/include/linux/zlib.h b/ANDROID_3.4.5/include/linux/zlib.h
deleted file mode 100644
index 9c5a6b4d..00000000
--- a/ANDROID_3.4.5/include/linux/zlib.h
+++ /dev/null
@@ -1,711 +0,0 @@
-/* zlib.h -- interface of the 'zlib' general purpose compression library
-
-  Copyright (C) 1995-2005 Jean-loup Gailly and Mark Adler
-
-  This software is provided 'as-is', without any express or implied
-  warranty.  In no event will the authors be held liable for any damages
-  arising from the use of this software.
-
-  Permission is granted to anyone to use this software for any purpose,
-  including commercial applications, and to alter it and redistribute it
-  freely, subject to the following restrictions:
-
-  1. The origin of this software must not be misrepresented; you must not
-     claim that you wrote the original software. If you use this software
-     in a product, an acknowledgment in the product documentation would be
-     appreciated but is not required.
-  2. Altered source versions must be plainly marked as such, and must not be
-     misrepresented as being the original software.
-  3. This notice may not be removed or altered from any source distribution.
-
-  Jean-loup Gailly        Mark Adler
-  jloup@gzip.org          madler@alumni.caltech.edu
-
-
-  The data format used by the zlib library is described by RFCs (Request for
-  Comments) 1950 to 1952 in the files http://www.ietf.org/rfc/rfc1950.txt
-  (zlib format), rfc1951.txt (deflate format) and rfc1952.txt (gzip format).
-*/
-
-#ifndef _ZLIB_H
-#define _ZLIB_H
-
-#include <linux/zconf.h>
-
-/* zlib deflate based on ZLIB_VERSION "1.1.3" */
-/* zlib inflate based on ZLIB_VERSION "1.2.3" */
-
-/*
-  This is a modified version of zlib for use inside the Linux kernel.
-  The main changes are to perform all memory allocation in advance.
-
-  Inflation Changes:
-    * Z_PACKET_FLUSH is added and used by ppp_deflate. Before returning
-      this checks there is no more input data available and the next data
-      is a STORED block. It also resets the mode to be read for the next
-      data, all as per PPP requirements.
-    * Addition of zlib_inflateIncomp which copies incompressible data into
-      the history window and adjusts the accoutning without calling
-      zlib_inflate itself to inflate the data.
-*/
-
-/* 
-     The 'zlib' compression library provides in-memory compression and
-  decompression functions, including integrity checks of the uncompressed
-  data.  This version of the library supports only one compression method
-  (deflation) but other algorithms will be added later and will have the same
-  stream interface.
-
-     Compression can be done in a single step if the buffers are large
-  enough (for example if an input file is mmap'ed), or can be done by
-  repeated calls of the compression function.  In the latter case, the
-  application must provide more input and/or consume the output
-  (providing more output space) before each call.
-
-     The compressed data format used by default by the in-memory functions is
-  the zlib format, which is a zlib wrapper documented in RFC 1950, wrapped
-  around a deflate stream, which is itself documented in RFC 1951.
-
-     The library also supports reading and writing files in gzip (.gz) format
-  with an interface similar to that of stdio.
-
-     The zlib format was designed to be compact and fast for use in memory
-  and on communications channels.  The gzip format was designed for single-
-  file compression on file systems, has a larger header than zlib to maintain
-  directory information, and uses a different, slower check method than zlib.
-
-     The library does not install any signal handler. The decoder checks
-  the consistency of the compressed data, so the library should never
-  crash even in case of corrupted input.
-*/
-
-struct internal_state;
-
-typedef struct z_stream_s {
-    const Byte *next_in;   /* next input byte */
-    uInt     avail_in;  /* number of bytes available at next_in */
-    uLong    total_in;  /* total nb of input bytes read so far */
-
-    Byte    *next_out;  /* next output byte should be put there */
-    uInt     avail_out; /* remaining free space at next_out */
-    uLong    total_out; /* total nb of bytes output so far */
-
-    char     *msg;      /* last error message, NULL if no error */
-    struct internal_state *state; /* not visible by applications */
-
-    void     *workspace; /* memory allocated for this stream */
-
-    int     data_type;  /* best guess about the data type: ascii or binary */
-    uLong   adler;      /* adler32 value of the uncompressed data */
-    uLong   reserved;   /* reserved for future use */
-} z_stream;
-
-typedef z_stream *z_streamp;
-
-/*
-   The application must update next_in and avail_in when avail_in has
-   dropped to zero. It must update next_out and avail_out when avail_out
-   has dropped to zero. The application must initialize zalloc, zfree and
-   opaque before calling the init function. All other fields are set by the
-   compression library and must not be updated by the application.
-
-   The opaque value provided by the application will be passed as the first
-   parameter for calls of zalloc and zfree. This can be useful for custom
-   memory management. The compression library attaches no meaning to the
-   opaque value.
-
-   zalloc must return NULL if there is not enough memory for the object.
-   If zlib is used in a multi-threaded application, zalloc and zfree must be
-   thread safe.
-
-   On 16-bit systems, the functions zalloc and zfree must be able to allocate
-   exactly 65536 bytes, but will not be required to allocate more than this
-   if the symbol MAXSEG_64K is defined (see zconf.h). WARNING: On MSDOS,
-   pointers returned by zalloc for objects of exactly 65536 bytes *must*
-   have their offset normalized to zero. The default allocation function
-   provided by this library ensures this (see zutil.c). To reduce memory
-   requirements and avoid any allocation of 64K objects, at the expense of
-   compression ratio, compile the library with -DMAX_WBITS=14 (see zconf.h).
-
-   The fields total_in and total_out can be used for statistics or
-   progress reports. After compression, total_in holds the total size of
-   the uncompressed data and may be saved for use in the decompressor
-   (particularly if the decompressor wants to decompress everything in
-   a single step).
-*/
-
-                        /* constants */
-
-#define Z_NO_FLUSH      0
-#define Z_PARTIAL_FLUSH 1 /* will be removed, use Z_SYNC_FLUSH instead */
-#define Z_PACKET_FLUSH  2
-#define Z_SYNC_FLUSH    3
-#define Z_FULL_FLUSH    4
-#define Z_FINISH        5
-#define Z_BLOCK         6 /* Only for inflate at present */
-/* Allowed flush values; see deflate() and inflate() below for details */
-
-#define Z_OK            0
-#define Z_STREAM_END    1
-#define Z_NEED_DICT     2
-#define Z_ERRNO        (-1)
-#define Z_STREAM_ERROR (-2)
-#define Z_DATA_ERROR   (-3)
-#define Z_MEM_ERROR    (-4)
-#define Z_BUF_ERROR    (-5)
-#define Z_VERSION_ERROR (-6)
-/* Return codes for the compression/decompression functions. Negative
- * values are errors, positive values are used for special but normal events.
- */
-
-#define Z_NO_COMPRESSION         0
-#define Z_BEST_SPEED             1
-#define Z_BEST_COMPRESSION       9
-#define Z_DEFAULT_COMPRESSION  (-1)
-/* compression levels */
-
-#define Z_FILTERED            1
-#define Z_HUFFMAN_ONLY        2
-#define Z_DEFAULT_STRATEGY    0
-/* compression strategy; see deflateInit2() below for details */
-
-#define Z_BINARY   0
-#define Z_ASCII    1
-#define Z_UNKNOWN  2
-/* Possible values of the data_type field */
-
-#define Z_DEFLATED   8
-/* The deflate compression method (the only one supported in this version) */
-
-                        /* basic functions */
-
-extern int zlib_deflate_workspacesize (int windowBits, int memLevel);
-/*
-   Returns the number of bytes that needs to be allocated for a per-
-   stream workspace with the specified parameters.  A pointer to this
-   number of bytes should be returned in stream->workspace before
-   you call zlib_deflateInit() or zlib_deflateInit2().  If you call
-   zlib_deflateInit(), specify windowBits = MAX_WBITS and memLevel =
-   MAX_MEM_LEVEL here.  If you call zlib_deflateInit2(), the windowBits
-   and memLevel parameters passed to zlib_deflateInit2() must not
-   exceed those passed here.
-*/
-
-/* 
-extern int deflateInit (z_streamp strm, int level);
-
-     Initializes the internal stream state for compression. The fields
-   zalloc, zfree and opaque must be initialized before by the caller.
-   If zalloc and zfree are set to NULL, deflateInit updates them to
-   use default allocation functions.
-
-     The compression level must be Z_DEFAULT_COMPRESSION, or between 0 and 9:
-   1 gives best speed, 9 gives best compression, 0 gives no compression at
-   all (the input data is simply copied a block at a time).
-   Z_DEFAULT_COMPRESSION requests a default compromise between speed and
-   compression (currently equivalent to level 6).
-
-     deflateInit returns Z_OK if success, Z_MEM_ERROR if there was not
-   enough memory, Z_STREAM_ERROR if level is not a valid compression level,
-   Z_VERSION_ERROR if the zlib library version (zlib_version) is incompatible
-   with the version assumed by the caller (ZLIB_VERSION).
-   msg is set to null if there is no error message.  deflateInit does not
-   perform any compression: this will be done by deflate().
-*/
-
-
-extern int zlib_deflate (z_streamp strm, int flush);
-/*
-    deflate compresses as much data as possible, and stops when the input
-  buffer becomes empty or the output buffer becomes full. It may introduce some
-  output latency (reading input without producing any output) except when
-  forced to flush.
-
-    The detailed semantics are as follows. deflate performs one or both of the
-  following actions:
-
-  - Compress more input starting at next_in and update next_in and avail_in
-    accordingly. If not all input can be processed (because there is not
-    enough room in the output buffer), next_in and avail_in are updated and
-    processing will resume at this point for the next call of deflate().
-
-  - Provide more output starting at next_out and update next_out and avail_out
-    accordingly. This action is forced if the parameter flush is non zero.
-    Forcing flush frequently degrades the compression ratio, so this parameter
-    should be set only when necessary (in interactive applications).
-    Some output may be provided even if flush is not set.
-
-  Before the call of deflate(), the application should ensure that at least
-  one of the actions is possible, by providing more input and/or consuming
-  more output, and updating avail_in or avail_out accordingly; avail_out
-  should never be zero before the call. The application can consume the
-  compressed output when it wants, for example when the output buffer is full
-  (avail_out == 0), or after each call of deflate(). If deflate returns Z_OK
-  and with zero avail_out, it must be called again after making room in the
-  output buffer because there might be more output pending.
-
-    If the parameter flush is set to Z_SYNC_FLUSH, all pending output is
-  flushed to the output buffer and the output is aligned on a byte boundary, so
-  that the decompressor can get all input data available so far. (In particular
-  avail_in is zero after the call if enough output space has been provided
-  before the call.)  Flushing may degrade compression for some compression
-  algorithms and so it should be used only when necessary.
-
-    If flush is set to Z_FULL_FLUSH, all output is flushed as with
-  Z_SYNC_FLUSH, and the compression state is reset so that decompression can
-  restart from this point if previous compressed data has been damaged or if
-  random access is desired. Using Z_FULL_FLUSH too often can seriously degrade
-  the compression.
-
-    If deflate returns with avail_out == 0, this function must be called again
-  with the same value of the flush parameter and more output space (updated
-  avail_out), until the flush is complete (deflate returns with non-zero
-  avail_out).
-
-    If the parameter flush is set to Z_FINISH, pending input is processed,
-  pending output is flushed and deflate returns with Z_STREAM_END if there
-  was enough output space; if deflate returns with Z_OK, this function must be
-  called again with Z_FINISH and more output space (updated avail_out) but no
-  more input data, until it returns with Z_STREAM_END or an error. After
-  deflate has returned Z_STREAM_END, the only possible operations on the
-  stream are deflateReset or deflateEnd.
-  
-    Z_FINISH can be used immediately after deflateInit if all the compression
-  is to be done in a single step. In this case, avail_out must be at least
-  0.1% larger than avail_in plus 12 bytes.  If deflate does not return
-  Z_STREAM_END, then it must be called again as described above.
-
-    deflate() sets strm->adler to the adler32 checksum of all input read
-  so far (that is, total_in bytes).
-
-    deflate() may update data_type if it can make a good guess about
-  the input data type (Z_ASCII or Z_BINARY). In doubt, the data is considered
-  binary. This field is only for information purposes and does not affect
-  the compression algorithm in any manner.
-
-    deflate() returns Z_OK if some progress has been made (more input
-  processed or more output produced), Z_STREAM_END if all input has been
-  consumed and all output has been produced (only when flush is set to
-  Z_FINISH), Z_STREAM_ERROR if the stream state was inconsistent (for example
-  if next_in or next_out was NULL), Z_BUF_ERROR if no progress is possible
-  (for example avail_in or avail_out was zero).
-*/
-
-
-extern int zlib_deflateEnd (z_streamp strm);
-/*
-     All dynamically allocated data structures for this stream are freed.
-   This function discards any unprocessed input and does not flush any
-   pending output.
-
-     deflateEnd returns Z_OK if success, Z_STREAM_ERROR if the
-   stream state was inconsistent, Z_DATA_ERROR if the stream was freed
-   prematurely (some input or output was discarded). In the error case,
-   msg may be set but then points to a static string (which must not be
-   deallocated).
-*/
-
-
-extern int zlib_inflate_workspacesize (void);
-/*
-   Returns the number of bytes that needs to be allocated for a per-
-   stream workspace.  A pointer to this number of bytes should be
-   returned in stream->workspace before calling zlib_inflateInit().
-*/
-
-/* 
-extern int zlib_inflateInit (z_streamp strm);
-
-     Initializes the internal stream state for decompression. The fields
-   next_in, avail_in, and workspace must be initialized before by
-   the caller. If next_in is not NULL and avail_in is large enough (the exact
-   value depends on the compression method), inflateInit determines the
-   compression method from the zlib header and allocates all data structures
-   accordingly; otherwise the allocation will be deferred to the first call of
-   inflate.  If zalloc and zfree are set to NULL, inflateInit updates them to
-   use default allocation functions.
-
-     inflateInit returns Z_OK if success, Z_MEM_ERROR if there was not enough
-   memory, Z_VERSION_ERROR if the zlib library version is incompatible with the
-   version assumed by the caller.  msg is set to null if there is no error
-   message. inflateInit does not perform any decompression apart from reading
-   the zlib header if present: this will be done by inflate().  (So next_in and
-   avail_in may be modified, but next_out and avail_out are unchanged.)
-*/
-
-
-extern int zlib_inflate (z_streamp strm, int flush);
-/*
-    inflate decompresses as much data as possible, and stops when the input
-  buffer becomes empty or the output buffer becomes full. It may introduce
-  some output latency (reading input without producing any output) except when
-  forced to flush.
-
-  The detailed semantics are as follows. inflate performs one or both of the
-  following actions:
-
-  - Decompress more input starting at next_in and update next_in and avail_in
-    accordingly. If not all input can be processed (because there is not
-    enough room in the output buffer), next_in is updated and processing
-    will resume at this point for the next call of inflate().
-
-  - Provide more output starting at next_out and update next_out and avail_out
-    accordingly.  inflate() provides as much output as possible, until there
-    is no more input data or no more space in the output buffer (see below
-    about the flush parameter).
-
-  Before the call of inflate(), the application should ensure that at least
-  one of the actions is possible, by providing more input and/or consuming
-  more output, and updating the next_* and avail_* values accordingly.
-  The application can consume the uncompressed output when it wants, for
-  example when the output buffer is full (avail_out == 0), or after each
-  call of inflate(). If inflate returns Z_OK and with zero avail_out, it
-  must be called again after making room in the output buffer because there
-  might be more output pending.
-
-    The flush parameter of inflate() can be Z_NO_FLUSH, Z_SYNC_FLUSH,
-  Z_FINISH, or Z_BLOCK. Z_SYNC_FLUSH requests that inflate() flush as much
-  output as possible to the output buffer. Z_BLOCK requests that inflate() stop
-  if and when it gets to the next deflate block boundary. When decoding the
-  zlib or gzip format, this will cause inflate() to return immediately after
-  the header and before the first block. When doing a raw inflate, inflate()
-  will go ahead and process the first block, and will return when it gets to
-  the end of that block, or when it runs out of data.
-
-    The Z_BLOCK option assists in appending to or combining deflate streams.
-  Also to assist in this, on return inflate() will set strm->data_type to the
-  number of unused bits in the last byte taken from strm->next_in, plus 64
-  if inflate() is currently decoding the last block in the deflate stream,
-  plus 128 if inflate() returned immediately after decoding an end-of-block
-  code or decoding the complete header up to just before the first byte of the
-  deflate stream. The end-of-block will not be indicated until all of the
-  uncompressed data from that block has been written to strm->next_out.  The
-  number of unused bits may in general be greater than seven, except when
-  bit 7 of data_type is set, in which case the number of unused bits will be
-  less than eight.
-
-    inflate() should normally be called until it returns Z_STREAM_END or an
-  error. However if all decompression is to be performed in a single step
-  (a single call of inflate), the parameter flush should be set to
-  Z_FINISH. In this case all pending input is processed and all pending
-  output is flushed; avail_out must be large enough to hold all the
-  uncompressed data. (The size of the uncompressed data may have been saved
-  by the compressor for this purpose.) The next operation on this stream must
-  be inflateEnd to deallocate the decompression state. The use of Z_FINISH
-  is never required, but can be used to inform inflate that a faster approach
-  may be used for the single inflate() call.
-
-     In this implementation, inflate() always flushes as much output as
-  possible to the output buffer, and always uses the faster approach on the
-  first call. So the only effect of the flush parameter in this implementation
-  is on the return value of inflate(), as noted below, or when it returns early
-  because Z_BLOCK is used.
-
-     If a preset dictionary is needed after this call (see inflateSetDictionary
-  below), inflate sets strm->adler to the adler32 checksum of the dictionary
-  chosen by the compressor and returns Z_NEED_DICT; otherwise it sets
-  strm->adler to the adler32 checksum of all output produced so far (that is,
-  total_out bytes) and returns Z_OK, Z_STREAM_END or an error code as described
-  below. At the end of the stream, inflate() checks that its computed adler32
-  checksum is equal to that saved by the compressor and returns Z_STREAM_END
-  only if the checksum is correct.
-
-    inflate() will decompress and check either zlib-wrapped or gzip-wrapped
-  deflate data.  The header type is detected automatically.  Any information
-  contained in the gzip header is not retained, so applications that need that
-  information should instead use raw inflate, see inflateInit2() below, or
-  inflateBack() and perform their own processing of the gzip header and
-  trailer.
-
-    inflate() returns Z_OK if some progress has been made (more input processed
-  or more output produced), Z_STREAM_END if the end of the compressed data has
-  been reached and all uncompressed output has been produced, Z_NEED_DICT if a
-  preset dictionary is needed at this point, Z_DATA_ERROR if the input data was
-  corrupted (input stream not conforming to the zlib format or incorrect check
-  value), Z_STREAM_ERROR if the stream structure was inconsistent (for example
-  if next_in or next_out was NULL), Z_MEM_ERROR if there was not enough memory,
-  Z_BUF_ERROR if no progress is possible or if there was not enough room in the
-  output buffer when Z_FINISH is used. Note that Z_BUF_ERROR is not fatal, and
-  inflate() can be called again with more input and more output space to
-  continue decompressing. If Z_DATA_ERROR is returned, the application may then
-  call inflateSync() to look for a good compression block if a partial recovery
-  of the data is desired.
-*/
-
-
-extern int zlib_inflateEnd (z_streamp strm);
-/*
-     All dynamically allocated data structures for this stream are freed.
-   This function discards any unprocessed input and does not flush any
-   pending output.
-
-     inflateEnd returns Z_OK if success, Z_STREAM_ERROR if the stream state
-   was inconsistent. In the error case, msg may be set but then points to a
-   static string (which must not be deallocated).
-*/
-
-                        /* Advanced functions */
-
-/*
-    The following functions are needed only in some special applications.
-*/
-
-/*   
-extern int deflateInit2 (z_streamp strm,
-                                     int  level,
-                                     int  method,
-                                     int  windowBits,
-                                     int  memLevel,
-                                     int  strategy);
-
-     This is another version of deflateInit with more compression options. The
-   fields next_in, zalloc, zfree and opaque must be initialized before by
-   the caller.
-
-     The method parameter is the compression method. It must be Z_DEFLATED in
-   this version of the library.
-
-     The windowBits parameter is the base two logarithm of the window size
-   (the size of the history buffer).  It should be in the range 8..15 for this
-   version of the library. Larger values of this parameter result in better
-   compression at the expense of memory usage. The default value is 15 if
-   deflateInit is used instead.
-
-     The memLevel parameter specifies how much memory should be allocated
-   for the internal compression state. memLevel=1 uses minimum memory but
-   is slow and reduces compression ratio; memLevel=9 uses maximum memory
-   for optimal speed. The default value is 8. See zconf.h for total memory
-   usage as a function of windowBits and memLevel.
-
-     The strategy parameter is used to tune the compression algorithm. Use the
-   value Z_DEFAULT_STRATEGY for normal data, Z_FILTERED for data produced by a
-   filter (or predictor), or Z_HUFFMAN_ONLY to force Huffman encoding only (no
-   string match).  Filtered data consists mostly of small values with a
-   somewhat random distribution. In this case, the compression algorithm is
-   tuned to compress them better. The effect of Z_FILTERED is to force more
-   Huffman coding and less string matching; it is somewhat intermediate
-   between Z_DEFAULT and Z_HUFFMAN_ONLY. The strategy parameter only affects
-   the compression ratio but not the correctness of the compressed output even
-   if it is not set appropriately.
-
-      deflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was not enough
-   memory, Z_STREAM_ERROR if a parameter is invalid (such as an invalid
-   method). msg is set to null if there is no error message.  deflateInit2 does
-   not perform any compression: this will be done by deflate().
-*/
-                            
-#if 0
-extern int zlib_deflateSetDictionary (z_streamp strm,
-						     const Byte *dictionary,
-						     uInt  dictLength);
-#endif
-/*
-     Initializes the compression dictionary from the given byte sequence
-   without producing any compressed output. This function must be called
-   immediately after deflateInit, deflateInit2 or deflateReset, before any
-   call of deflate. The compressor and decompressor must use exactly the same
-   dictionary (see inflateSetDictionary).
-
-     The dictionary should consist of strings (byte sequences) that are likely
-   to be encountered later in the data to be compressed, with the most commonly
-   used strings preferably put towards the end of the dictionary. Using a
-   dictionary is most useful when the data to be compressed is short and can be
-   predicted with good accuracy; the data can then be compressed better than
-   with the default empty dictionary.
-
-     Depending on the size of the compression data structures selected by
-   deflateInit or deflateInit2, a part of the dictionary may in effect be
-   discarded, for example if the dictionary is larger than the window size in
-   deflate or deflate2. Thus the strings most likely to be useful should be
-   put at the end of the dictionary, not at the front.
-
-     Upon return of this function, strm->adler is set to the Adler32 value
-   of the dictionary; the decompressor may later use this value to determine
-   which dictionary has been used by the compressor. (The Adler32 value
-   applies to the whole dictionary even if only a subset of the dictionary is
-   actually used by the compressor.)
-
-     deflateSetDictionary returns Z_OK if success, or Z_STREAM_ERROR if a
-   parameter is invalid (such as NULL dictionary) or the stream state is
-   inconsistent (for example if deflate has already been called for this stream
-   or if the compression method is bsort). deflateSetDictionary does not
-   perform any compression: this will be done by deflate().
-*/
-
-#if 0
-extern int zlib_deflateCopy (z_streamp dest, z_streamp source);
-#endif
-
-/*
-     Sets the destination stream as a complete copy of the source stream.
-
-     This function can be useful when several compression strategies will be
-   tried, for example when there are several ways of pre-processing the input
-   data with a filter. The streams that will be discarded should then be freed
-   by calling deflateEnd.  Note that deflateCopy duplicates the internal
-   compression state which can be quite large, so this strategy is slow and
-   can consume lots of memory.
-
-     deflateCopy returns Z_OK if success, Z_MEM_ERROR if there was not
-   enough memory, Z_STREAM_ERROR if the source stream state was inconsistent
-   (such as zalloc being NULL). msg is left unchanged in both source and
-   destination.
-*/
-
-extern int zlib_deflateReset (z_streamp strm);
-/*
-     This function is equivalent to deflateEnd followed by deflateInit,
-   but does not free and reallocate all the internal compression state.
-   The stream will keep the same compression level and any other attributes
-   that may have been set by deflateInit2.
-
-      deflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source
-   stream state was inconsistent (such as zalloc or state being NULL).
-*/
-
-static inline unsigned long deflateBound(unsigned long s)
-{
-	return s + ((s + 7) >> 3) + ((s + 63) >> 6) + 11;
-}
-
-#if 0
-extern int zlib_deflateParams (z_streamp strm, int level, int strategy);
-#endif
-/*
-     Dynamically update the compression level and compression strategy.  The
-   interpretation of level and strategy is as in deflateInit2.  This can be
-   used to switch between compression and straight copy of the input data, or
-   to switch to a different kind of input data requiring a different
-   strategy. If the compression level is changed, the input available so far
-   is compressed with the old level (and may be flushed); the new level will
-   take effect only at the next call of deflate().
-
-     Before the call of deflateParams, the stream state must be set as for
-   a call of deflate(), since the currently available input may have to
-   be compressed and flushed. In particular, strm->avail_out must be non-zero.
-
-     deflateParams returns Z_OK if success, Z_STREAM_ERROR if the source
-   stream state was inconsistent or if a parameter was invalid, Z_BUF_ERROR
-   if strm->avail_out was zero.
-*/
-
-/*   
-extern int inflateInit2 (z_streamp strm, int  windowBits);
-
-     This is another version of inflateInit with an extra parameter. The
-   fields next_in, avail_in, zalloc, zfree and opaque must be initialized
-   before by the caller.
-
-     The windowBits parameter is the base two logarithm of the maximum window
-   size (the size of the history buffer).  It should be in the range 8..15 for
-   this version of the library. The default value is 15 if inflateInit is used
-   instead. windowBits must be greater than or equal to the windowBits value
-   provided to deflateInit2() while compressing, or it must be equal to 15 if
-   deflateInit2() was not used. If a compressed stream with a larger window
-   size is given as input, inflate() will return with the error code
-   Z_DATA_ERROR instead of trying to allocate a larger window.
-
-     windowBits can also be -8..-15 for raw inflate. In this case, -windowBits
-   determines the window size. inflate() will then process raw deflate data,
-   not looking for a zlib or gzip header, not generating a check value, and not
-   looking for any check values for comparison at the end of the stream. This
-   is for use with other formats that use the deflate compressed data format
-   such as zip.  Those formats provide their own check values. If a custom
-   format is developed using the raw deflate format for compressed data, it is
-   recommended that a check value such as an adler32 or a crc32 be applied to
-   the uncompressed data as is done in the zlib, gzip, and zip formats.  For
-   most applications, the zlib format should be used as is. Note that comments
-   above on the use in deflateInit2() applies to the magnitude of windowBits.
-
-     windowBits can also be greater than 15 for optional gzip decoding. Add
-   32 to windowBits to enable zlib and gzip decoding with automatic header
-   detection, or add 16 to decode only the gzip format (the zlib format will
-   return a Z_DATA_ERROR).  If a gzip stream is being decoded, strm->adler is
-   a crc32 instead of an adler32.
-
-     inflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was not enough
-   memory, Z_STREAM_ERROR if a parameter is invalid (such as a null strm). msg
-   is set to null if there is no error message.  inflateInit2 does not perform
-   any decompression apart from reading the zlib header if present: this will
-   be done by inflate(). (So next_in and avail_in may be modified, but next_out
-   and avail_out are unchanged.)
-*/
-
-extern int zlib_inflateSetDictionary (z_streamp strm,
-						     const Byte *dictionary,
-						     uInt  dictLength);
-/*
-     Initializes the decompression dictionary from the given uncompressed byte
-   sequence. This function must be called immediately after a call of inflate,
-   if that call returned Z_NEED_DICT. The dictionary chosen by the compressor
-   can be determined from the adler32 value returned by that call of inflate.
-   The compressor and decompressor must use exactly the same dictionary (see
-   deflateSetDictionary).  For raw inflate, this function can be called
-   immediately after inflateInit2() or inflateReset() and before any call of
-   inflate() to set the dictionary.  The application must insure that the
-   dictionary that was used for compression is provided.
-
-     inflateSetDictionary returns Z_OK if success, Z_STREAM_ERROR if a
-   parameter is invalid (such as NULL dictionary) or the stream state is
-   inconsistent, Z_DATA_ERROR if the given dictionary doesn't match the
-   expected one (incorrect adler32 value). inflateSetDictionary does not
-   perform any decompression: this will be done by subsequent calls of
-   inflate().
-*/
-
-#if 0
-extern int zlib_inflateSync (z_streamp strm);
-#endif
-/* 
-    Skips invalid compressed data until a full flush point (see above the
-  description of deflate with Z_FULL_FLUSH) can be found, or until all
-  available input is skipped. No output is provided.
-
-    inflateSync returns Z_OK if a full flush point has been found, Z_BUF_ERROR
-  if no more input was provided, Z_DATA_ERROR if no flush point has been found,
-  or Z_STREAM_ERROR if the stream structure was inconsistent. In the success
-  case, the application may save the current current value of total_in which
-  indicates where valid compressed data was found. In the error case, the
-  application may repeatedly call inflateSync, providing more input each time,
-  until success or end of the input data.
-*/
-
-extern int zlib_inflateReset (z_streamp strm);
-/*
-     This function is equivalent to inflateEnd followed by inflateInit,
-   but does not free and reallocate all the internal decompression state.
-   The stream will keep attributes that may have been set by inflateInit2.
-
-      inflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source
-   stream state was inconsistent (such as zalloc or state being NULL).
-*/
-
-extern int zlib_inflateIncomp (z_stream *strm);
-/*
-     This function adds the data at next_in (avail_in bytes) to the output
-   history without performing any output.  There must be no pending output,
-   and the decompressor must be expecting to see the start of a block.
-   Calling this function is equivalent to decompressing a stored block
-   containing the data at next_in (except that the data is not output).
-*/
-
-#define zlib_deflateInit(strm, level) \
-	zlib_deflateInit2((strm), (level), Z_DEFLATED, MAX_WBITS, \
-			      DEF_MEM_LEVEL, Z_DEFAULT_STRATEGY)
-#define zlib_inflateInit(strm) \
-	zlib_inflateInit2((strm), DEF_WBITS)
-
-extern int zlib_deflateInit2(z_streamp strm, int  level, int  method,
-                                      int windowBits, int memLevel,
-                                      int strategy);
-extern int zlib_inflateInit2(z_streamp strm, int  windowBits);
-
-#if !defined(_Z_UTIL_H) && !defined(NO_DUMMY_DECL)
-    struct internal_state {int dummy;}; /* hack for buggy compilers */
-#endif
-
-/* Utility function: initialize zlib, unpack binary blob, clean up zlib,
- * return len or negative error code. */
-extern int zlib_inflate_blob(void *dst, unsigned dst_sz, const void *src, unsigned src_sz);
-
-#endif /* _ZLIB_H */
diff --git a/ANDROID_3.4.5/include/linux/zorro.h b/ANDROID_3.4.5/include/linux/zorro.h
deleted file mode 100644
index dff42025..00000000
--- a/ANDROID_3.4.5/include/linux/zorro.h
+++ /dev/null
@@ -1,234 +0,0 @@
-/*
- *  linux/zorro.h -- Amiga AutoConfig (Zorro) Bus Definitions
- *
- *  Copyright (C) 1995--2003 Geert Uytterhoeven
- *
- *  This file is subject to the terms and conditions of the GNU General Public
- *  License.  See the file COPYING in the main directory of this archive
- *  for more details.
- */
-
-#ifndef _LINUX_ZORRO_H
-#define _LINUX_ZORRO_H
-
-#include <linux/device.h>
-
-
-    /*
-     *  Each Zorro board has a 32-bit ID of the form
-     *
-     *      mmmmmmmmmmmmmmmmppppppppeeeeeeee
-     *
-     *  with
-     *
-     *      mmmmmmmmmmmmmmmm	16-bit Manufacturer ID (assigned by CBM (sigh))
-     *      pppppppp		8-bit Product ID (assigned by manufacturer)
-     *      eeeeeeee		8-bit Extended Product ID (currently only used
-     *				for some GVP boards)
-     */
-
-
-#define ZORRO_MANUF(id)		((id) >> 16)
-#define ZORRO_PROD(id)		(((id) >> 8) & 0xff)
-#define ZORRO_EPC(id)		((id) & 0xff)
-
-#define ZORRO_ID(manuf, prod, epc) \
-    ((ZORRO_MANUF_##manuf << 16) | ((prod) << 8) | (epc))
-
-typedef __u32 zorro_id;
-
-
-/* Include the ID list */
-#include <linux/zorro_ids.h>
-
-
-    /*
-     *  GVP identifies most of its products through the 'extended product code'
-     *  (epc). The epc has to be ANDed with the GVP_PRODMASK before the
-     *  identification.
-     */
-
-#define GVP_PRODMASK			(0xf8)
-#define GVP_SCSICLKMASK			(0x01)
-
-enum GVP_flags {
-    GVP_IO		= 0x01,
-    GVP_ACCEL		= 0x02,
-    GVP_SCSI		= 0x04,
-    GVP_24BITDMA	= 0x08,
-    GVP_25BITDMA	= 0x10,
-    GVP_NOBANK		= 0x20,
-    GVP_14MHZ		= 0x40,
-};
-
-
-struct Node {
-    struct  Node *ln_Succ;	/* Pointer to next (successor) */
-    struct  Node *ln_Pred;	/* Pointer to previous (predecessor) */
-    __u8    ln_Type;
-    __s8    ln_Pri;		/* Priority, for sorting */
-    __s8    *ln_Name;		/* ID string, null terminated */
-} __attribute__ ((packed));
-
-struct ExpansionRom {
-    /* -First 16 bytes of the expansion ROM */
-    __u8  er_Type;		/* Board type, size and flags */
-    __u8  er_Product;		/* Product number, assigned by manufacturer */
-    __u8  er_Flags;		/* Flags */
-    __u8  er_Reserved03;	/* Must be zero ($ff inverted) */
-    __u16 er_Manufacturer;	/* Unique ID, ASSIGNED BY COMMODORE-AMIGA! */
-    __u32 er_SerialNumber;	/* Available for use by manufacturer */
-    __u16 er_InitDiagVec;	/* Offset to optional "DiagArea" structure */
-    __u8  er_Reserved0c;
-    __u8  er_Reserved0d;
-    __u8  er_Reserved0e;
-    __u8  er_Reserved0f;
-} __attribute__ ((packed));
-
-/* er_Type board type bits */
-#define ERT_TYPEMASK	0xc0
-#define ERT_ZORROII	0xc0
-#define ERT_ZORROIII	0x80
-
-/* other bits defined in er_Type */
-#define ERTB_MEMLIST	5		/* Link RAM into free memory list */
-#define ERTF_MEMLIST	(1<<5)
-
-struct ConfigDev {
-    struct Node		cd_Node;
-    __u8		cd_Flags;	/* (read/write) */
-    __u8		cd_Pad;		/* reserved */
-    struct ExpansionRom cd_Rom;		/* copy of board's expansion ROM */
-    void		*cd_BoardAddr;	/* where in memory the board was placed */
-    __u32		cd_BoardSize;	/* size of board in bytes */
-    __u16		cd_SlotAddr;	/* which slot number (PRIVATE) */
-    __u16		cd_SlotSize;	/* number of slots (PRIVATE) */
-    void		*cd_Driver;	/* pointer to node of driver */
-    struct ConfigDev	*cd_NextCD;	/* linked list of drivers to config */
-    __u32		cd_Unused[4];	/* for whatever the driver wants */
-} __attribute__ ((packed));
-
-#define ZORRO_NUM_AUTO		16
-
-#ifdef __KERNEL__
-
-#include <linux/init.h>
-#include <linux/ioport.h>
-#include <linux/mod_devicetable.h>
-
-#include <asm/zorro.h>
-
-
-    /*
-     *  Zorro devices
-     */
-
-struct zorro_dev {
-    struct ExpansionRom rom;
-    zorro_id id;
-    struct zorro_driver *driver;	/* which driver has allocated this device */
-    struct device dev;			/* Generic device interface */
-    u16 slotaddr;
-    u16 slotsize;
-    char name[64];
-    struct resource resource;
-};
-
-#define	to_zorro_dev(n)	container_of(n, struct zorro_dev, dev)
-
-
-    /*
-     *  Zorro bus
-     */
-
-extern struct bus_type zorro_bus_type;
-
-
-    /*
-     *  Zorro device drivers
-     */
-
-struct zorro_driver {
-    struct list_head node;
-    char *name;
-    const struct zorro_device_id *id_table;	/* NULL if wants all devices */
-    int (*probe)(struct zorro_dev *z, const struct zorro_device_id *id);	/* New device inserted */
-    void (*remove)(struct zorro_dev *z);	/* Device removed (NULL if not a hot-plug capable driver) */
-    struct device_driver driver;
-};
-
-#define	to_zorro_driver(drv)	container_of(drv, struct zorro_driver, driver)
-
-
-#define zorro_for_each_dev(dev)	\
-	for (dev = &zorro_autocon[0]; dev < zorro_autocon+zorro_num_autocon; dev++)
-
-
-/* New-style probing */
-extern int zorro_register_driver(struct zorro_driver *);
-extern void zorro_unregister_driver(struct zorro_driver *);
-extern const struct zorro_device_id *zorro_match_device(const struct zorro_device_id *ids, const struct zorro_dev *z);
-static inline struct zorro_driver *zorro_dev_driver(const struct zorro_dev *z)
-{
-    return z->driver;
-}
-
-
-extern unsigned int zorro_num_autocon;	/* # of autoconfig devices found */
-extern struct zorro_dev zorro_autocon[ZORRO_NUM_AUTO];
-
-
-    /*
-     *  Zorro Functions
-     */
-
-extern struct zorro_dev *zorro_find_device(zorro_id id,
-					   struct zorro_dev *from);
-
-#define zorro_resource_start(z)	((z)->resource.start)
-#define zorro_resource_end(z)	((z)->resource.end)
-#define zorro_resource_len(z)	(resource_size(&(z)->resource))
-#define zorro_resource_flags(z)	((z)->resource.flags)
-
-#define zorro_request_device(z, name) \
-    request_mem_region(zorro_resource_start(z), zorro_resource_len(z), name)
-#define zorro_release_device(z) \
-    release_mem_region(zorro_resource_start(z), zorro_resource_len(z))
-
-/* Similar to the helpers above, these manipulate per-zorro_dev
- * driver-specific data.  They are really just a wrapper around
- * the generic device structure functions of these calls.
- */
-static inline void *zorro_get_drvdata (struct zorro_dev *z)
-{
-	return dev_get_drvdata(&z->dev);
-}
-
-static inline void zorro_set_drvdata (struct zorro_dev *z, void *data)
-{
-	dev_set_drvdata(&z->dev, data);
-}
-
-
-    /*
-     *  Bitmask indicating portions of available Zorro II RAM that are unused
-     *  by the system. Every bit represents a 64K chunk, for a maximum of 8MB
-     *  (128 chunks, physical 0x00200000-0x009fffff).
-     *
-     *  If you want to use (= allocate) portions of this RAM, you should clear
-     *  the corresponding bits.
-     */
-
-extern DECLARE_BITMAP(zorro_unused_z2ram, 128);
-
-#define Z2RAM_START		(0x00200000)
-#define Z2RAM_END		(0x00a00000)
-#define Z2RAM_SIZE		(0x00800000)
-#define Z2RAM_CHUNKSIZE		(0x00010000)
-#define Z2RAM_CHUNKMASK		(0x0000ffff)
-#define Z2RAM_CHUNKSHIFT	(16)
-
-
-#endif /* __KERNEL__ */
-
-#endif /* _LINUX_ZORRO_H */
diff --git a/ANDROID_3.4.5/include/linux/zorro_ids.h b/ANDROID_3.4.5/include/linux/zorro_ids.h
deleted file mode 100644
index 74bc53bc..00000000
--- a/ANDROID_3.4.5/include/linux/zorro_ids.h
+++ /dev/null
@@ -1,552 +0,0 @@
-/*
- *  Zorro board IDs
- *
- *  Please keep sorted.
- */
-
-
-#define ZORRO_MANUF_PACIFIC_PERIPHERALS				0x00D3
-#define  ZORRO_PROD_PACIFIC_PERIPHERALS_SE_2000_A500		ZORRO_ID(PACIFIC_PERIPHERALS, 0x00, 0)
-#define  ZORRO_PROD_PACIFIC_PERIPHERALS_SCSI			ZORRO_ID(PACIFIC_PERIPHERALS, 0x0A, 0)
-
-#define ZORRO_MANUF_MACROSYSTEMS_USA_2				0x0100
-#define  ZORRO_PROD_MACROSYSTEMS_WARP_ENGINE			ZORRO_ID(MACROSYSTEMS_USA_2, 0x13, 0)
-
-#define ZORRO_MANUF_KUPKE_1					0x00DD
-#define  ZORRO_PROD_KUPKE_GOLEM_RAM_BOX_2MB			ZORRO_ID(KUPKE_1, 0x00, 0)
-
-#define ZORRO_MANUF_MEMPHIS					0x0100
-#define  ZORRO_PROD_MEMPHIS_STORMBRINGER			ZORRO_ID(MEMPHIS, 0x00, 0)
-
-#define ZORRO_MANUF_3_STATE					0x0200
-#define  ZORRO_PROD_3_STATE_MEGAMIX_2000			ZORRO_ID(3_STATE, 0x02, 0)
-
-#define ZORRO_MANUF_COMMODORE_BRAUNSCHWEIG			0x0201
-#define  ZORRO_PROD_CBM_A2088_A2286				ZORRO_ID(COMMODORE_BRAUNSCHWEIG, 0x01, 0)
-#define  ZORRO_PROD_CBM_A2286					ZORRO_ID(COMMODORE_BRAUNSCHWEIG, 0x02, 0)
-#define  ZORRO_PROD_CBM_A4091_1					ZORRO_ID(COMMODORE_BRAUNSCHWEIG, 0x54, 0)
-#define  ZORRO_PROD_CBM_A2386SX_1				ZORRO_ID(COMMODORE_BRAUNSCHWEIG, 0x67, 0)
-
-#define ZORRO_MANUF_COMMODORE_WEST_CHESTER_1			0x0202
-#define  ZORRO_PROD_CBM_A2090A					ZORRO_ID(COMMODORE_WEST_CHESTER_1, 0x01, 0)
-#define  ZORRO_PROD_CBM_A590_A2091_1				ZORRO_ID(COMMODORE_WEST_CHESTER_1, 0x02, 0)
-#define  ZORRO_PROD_CBM_A590_A2091_2				ZORRO_ID(COMMODORE_WEST_CHESTER_1, 0x03, 0)
-#define  ZORRO_PROD_CBM_A2090B					ZORRO_ID(COMMODORE_WEST_CHESTER_1, 0x04, 0)
-#define  ZORRO_PROD_CBM_A2060					ZORRO_ID(COMMODORE_WEST_CHESTER_1, 0x09, 0)
-#define  ZORRO_PROD_CBM_A590_A2052_A2058_A2091			ZORRO_ID(COMMODORE_WEST_CHESTER_1, 0x0A, 0)
-#define  ZORRO_PROD_CBM_A560_RAM				ZORRO_ID(COMMODORE_WEST_CHESTER_1, 0x20, 0)
-#define  ZORRO_PROD_CBM_A2232_PROTOTYPE				ZORRO_ID(COMMODORE_WEST_CHESTER_1, 0x45, 0)
-#define  ZORRO_PROD_CBM_A2232					ZORRO_ID(COMMODORE_WEST_CHESTER_1, 0x46, 0)
-#define  ZORRO_PROD_CBM_A2620					ZORRO_ID(COMMODORE_WEST_CHESTER_1, 0x50, 0)
-#define  ZORRO_PROD_CBM_A2630					ZORRO_ID(COMMODORE_WEST_CHESTER_1, 0x51, 0)
-#define  ZORRO_PROD_CBM_A4091_2					ZORRO_ID(COMMODORE_WEST_CHESTER_1, 0x54, 0)
-#define  ZORRO_PROD_CBM_A2065_1					ZORRO_ID(COMMODORE_WEST_CHESTER_1, 0x5A, 0)
-#define  ZORRO_PROD_CBM_ROMULATOR				ZORRO_ID(COMMODORE_WEST_CHESTER_1, 0x60, 0)
-#define  ZORRO_PROD_CBM_A3000_TEST_FIXTURE			ZORRO_ID(COMMODORE_WEST_CHESTER_1, 0x61, 0)
-#define  ZORRO_PROD_CBM_A2386SX_2				ZORRO_ID(COMMODORE_WEST_CHESTER_1, 0x67, 0)
-#define  ZORRO_PROD_CBM_A2065_2					ZORRO_ID(COMMODORE_WEST_CHESTER_1, 0x70, 0)
-
-#define ZORRO_MANUF_COMMODORE_WEST_CHESTER_2			0x0203
-#define  ZORRO_PROD_CBM_A2090A_CM				ZORRO_ID(COMMODORE_WEST_CHESTER_2, 0x03, 0)
-
-#define ZORRO_MANUF_PROGRESSIVE_PERIPHERALS_AND_SYSTEMS_2	0x02F4
-#define  ZORRO_PROD_PPS_EXP8000					ZORRO_ID(PROGRESSIVE_PERIPHERALS_AND_SYSTEMS_2, 0x02, 0)
-
-#define ZORRO_MANUF_KOLFF_COMPUTER_SUPPLIES			0x02FF
-#define  ZORRO_PROD_KCS_POWER_PC_BOARD				ZORRO_ID(KOLFF_COMPUTER_SUPPLIES, 0x00, 0)
-
-#define ZORRO_MANUF_CARDCO_1					0x03EC
-#define  ZORRO_PROD_CARDCO_KRONOS_2000_1			ZORRO_ID(CARDCO_1, 0x04, 0)
-#define  ZORRO_PROD_CARDCO_A1000_1				ZORRO_ID(CARDCO_1, 0x0C, 0)
-#define  ZORRO_PROD_CARDCO_ESCORT				ZORRO_ID(CARDCO_1, 0x0E, 0)
-#define  ZORRO_PROD_CARDCO_A2410				ZORRO_ID(CARDCO_1, 0xF5, 0)
-
-#define ZORRO_MANUF_A_SQUARED					0x03ED
-#define  ZORRO_PROD_A_SQUARED_LIVE_2000				ZORRO_ID(A_SQUARED, 0x01, 0)
-
-#define ZORRO_MANUF_COMSPEC_COMMUNICATIONS			0x03EE
-#define  ZORRO_PROD_COMSPEC_COMMUNICATIONS_AX2000		ZORRO_ID(COMSPEC_COMMUNICATIONS, 0x01, 0)
-
-#define ZORRO_MANUF_ANAKIN_RESEARCH				0x03F1
-#define  ZORRO_PROD_ANAKIN_RESEARCH_EASYL			ZORRO_ID(ANAKIN_RESEARCH, 0x01, 0)
-
-#define ZORRO_MANUF_MICROBOTICS					0x03F2
-#define  ZORRO_PROD_MICROBOTICS_STARBOARD_II			ZORRO_ID(MICROBOTICS, 0x00, 0)
-#define  ZORRO_PROD_MICROBOTICS_STARDRIVE			ZORRO_ID(MICROBOTICS, 0x02, 0)
-#define  ZORRO_PROD_MICROBOTICS_8_UP_A				ZORRO_ID(MICROBOTICS, 0x03, 0)
-#define  ZORRO_PROD_MICROBOTICS_8_UP_Z				ZORRO_ID(MICROBOTICS, 0x04, 0)
-#define  ZORRO_PROD_MICROBOTICS_DELTA_RAM			ZORRO_ID(MICROBOTICS, 0x20, 0)
-#define  ZORRO_PROD_MICROBOTICS_8_STAR_RAM			ZORRO_ID(MICROBOTICS, 0x40, 0)
-#define  ZORRO_PROD_MICROBOTICS_8_STAR				ZORRO_ID(MICROBOTICS, 0x41, 0)
-#define  ZORRO_PROD_MICROBOTICS_VXL_RAM_32			ZORRO_ID(MICROBOTICS, 0x44, 0)
-#define  ZORRO_PROD_MICROBOTICS_VXL_68030			ZORRO_ID(MICROBOTICS, 0x45, 0)
-#define  ZORRO_PROD_MICROBOTICS_DELTA				ZORRO_ID(MICROBOTICS, 0x60, 0)
-#define  ZORRO_PROD_MICROBOTICS_MBX_1200_1200Z_RAM		ZORRO_ID(MICROBOTICS, 0x81, 0)
-#define  ZORRO_PROD_MICROBOTICS_HARDFRAME_2000_1		ZORRO_ID(MICROBOTICS, 0x96, 0)
-#define  ZORRO_PROD_MICROBOTICS_HARDFRAME_2000_2		ZORRO_ID(MICROBOTICS, 0x9E, 0)
-#define  ZORRO_PROD_MICROBOTICS_MBX_1200_1200Z			ZORRO_ID(MICROBOTICS, 0xC1, 0)
-
-#define ZORRO_MANUF_ACCESS_ASSOCIATES_ALEGRA			0x03F4
-
-#define ZORRO_MANUF_EXPANSION_TECHNOLOGIES			0x03F6
-
-#define ZORRO_MANUF_ASDG					0x03FF
-#define  ZORRO_PROD_ASDG_MEMORY_1				ZORRO_ID(ASDG, 0x01, 0)
-#define  ZORRO_PROD_ASDG_MEMORY_2				ZORRO_ID(ASDG, 0x02, 0)
-#define  ZORRO_PROD_ASDG_EB920_LAN_ROVER			ZORRO_ID(ASDG, 0xFE, 0)
-#define  ZORRO_PROD_ASDG_GPIB_DUALIEEE488_TWIN_X		ZORRO_ID(ASDG, 0xFF, 0)
-
-#define ZORRO_MANUF_IMTRONICS_1					0x0404
-#define  ZORRO_PROD_IMTRONICS_HURRICANE_2800_1			ZORRO_ID(IMTRONICS_1, 0x39, 0)
-#define  ZORRO_PROD_IMTRONICS_HURRICANE_2800_2			ZORRO_ID(IMTRONICS_1, 0x57, 0)
-
-#define ZORRO_MANUF_CBM_UNIVERSITY_OF_LOWELL			0x0406
-#define  ZORRO_PROD_CBM_A2410					ZORRO_ID(CBM_UNIVERSITY_OF_LOWELL, 0x00, 0)
-
-#define ZORRO_MANUF_AMERISTAR					0x041D
-#define  ZORRO_PROD_AMERISTAR_A2065				ZORRO_ID(AMERISTAR, 0x01, 0)
-#define  ZORRO_PROD_AMERISTAR_A560				ZORRO_ID(AMERISTAR, 0x09, 0)
-#define  ZORRO_PROD_AMERISTAR_A4066				ZORRO_ID(AMERISTAR, 0x0A, 0)
-
-#define ZORRO_MANUF_SUPRA					0x0420
-#define  ZORRO_PROD_SUPRA_SUPRADRIVE_4x4			ZORRO_ID(SUPRA, 0x01, 0)
-#define  ZORRO_PROD_SUPRA_1000_RAM				ZORRO_ID(SUPRA, 0x02, 0)
-#define  ZORRO_PROD_SUPRA_2000_DMA				ZORRO_ID(SUPRA, 0x03, 0)
-#define  ZORRO_PROD_SUPRA_500					ZORRO_ID(SUPRA, 0x05, 0)
-#define  ZORRO_PROD_SUPRA_500_SCSI				ZORRO_ID(SUPRA, 0x08, 0)
-#define  ZORRO_PROD_SUPRA_500XP_2000_RAM			ZORRO_ID(SUPRA, 0x09, 0)
-#define  ZORRO_PROD_SUPRA_500RX_2000_RAM			ZORRO_ID(SUPRA, 0x0A, 0)
-#define  ZORRO_PROD_SUPRA_2400ZI				ZORRO_ID(SUPRA, 0x0B, 0)
-#define  ZORRO_PROD_SUPRA_500XP_SUPRADRIVE_WORDSYNC		ZORRO_ID(SUPRA, 0x0C, 0)
-#define  ZORRO_PROD_SUPRA_SUPRADRIVE_WORDSYNC_II		ZORRO_ID(SUPRA, 0x0D, 0)
-#define  ZORRO_PROD_SUPRA_2400ZIPLUS				ZORRO_ID(SUPRA, 0x10, 0)
-
-#define ZORRO_MANUF_COMPUTER_SYSTEMS_ASSOCIATES			0x0422
-#define  ZORRO_PROD_CSA_MAGNUM					ZORRO_ID(COMPUTER_SYSTEMS_ASSOCIATES, 0x11, 0)
-#define  ZORRO_PROD_CSA_12_GAUGE				ZORRO_ID(COMPUTER_SYSTEMS_ASSOCIATES, 0x15, 0)
-
-#define ZORRO_MANUF_MARC_MICHAEL_GROTH				0x0439
-
-#define ZORRO_MANUF_M_TECH					0x0502
-#define  ZORRO_PROD_MTEC_AT500_1				ZORRO_ID(M_TECH, 0x03, 0)
-
-#define ZORRO_MANUF_GREAT_VALLEY_PRODUCTS_1			0x06E1
-#define  ZORRO_PROD_GVP_IMPACT_SERIES_I				ZORRO_ID(GREAT_VALLEY_PRODUCTS_1, 0x08, 0)
-
-#define ZORRO_MANUF_BYTEBOX					0x07DA
-#define  ZORRO_PROD_BYTEBOX_A500				ZORRO_ID(BYTEBOX, 0x00, 0)
-
-#define ZORRO_MANUF_DKB_POWER_COMPUTING				0x07DC
-#define  ZORRO_PROD_DKB_POWER_COMPUTING_SECUREKEY		ZORRO_ID(DKB_POWER_COMPUTING, 0x09, 0)
-#define  ZORRO_PROD_DKB_POWER_COMPUTING_DKM_3128		ZORRO_ID(DKB_POWER_COMPUTING, 0x0E, 0)
-#define  ZORRO_PROD_DKB_POWER_COMPUTING_RAPID_FIRE		ZORRO_ID(DKB_POWER_COMPUTING, 0x0F, 0)
-#define  ZORRO_PROD_DKB_POWER_COMPUTING_DKM_1202		ZORRO_ID(DKB_POWER_COMPUTING, 0x10, 0)
-#define  ZORRO_PROD_DKB_POWER_COMPUTING_COBRA_VIPER_II_68EC030	ZORRO_ID(DKB_POWER_COMPUTING, 0x12, 0)
-#define  ZORRO_PROD_DKB_POWER_COMPUTING_WILDFIRE_060_1		ZORRO_ID(DKB_POWER_COMPUTING, 0x17, 0)
-#define  ZORRO_PROD_DKB_POWER_COMPUTING_WILDFIRE_060_2		ZORRO_ID(DKB_POWER_COMPUTING, 0xFF, 0)
-
-#define ZORRO_MANUF_GREAT_VALLEY_PRODUCTS_2			0x07E1
-#define  ZORRO_PROD_GVP_IMPACT_SERIES_I_4K			ZORRO_ID(GREAT_VALLEY_PRODUCTS_2, 0x01, 0)
-#define  ZORRO_PROD_GVP_IMPACT_SERIES_I_16K_2			ZORRO_ID(GREAT_VALLEY_PRODUCTS_2, 0x02, 0)
-#define  ZORRO_PROD_GVP_IMPACT_SERIES_I_16K_3			ZORRO_ID(GREAT_VALLEY_PRODUCTS_2, 0x03, 0)
-#define  ZORRO_PROD_GVP_IMPACT_3001_IDE_1			ZORRO_ID(GREAT_VALLEY_PRODUCTS_2, 0x08, 0)
-#define  ZORRO_PROD_GVP_IMPACT_3001_RAM				ZORRO_ID(GREAT_VALLEY_PRODUCTS_2, 0x09, 0)
-#define  ZORRO_PROD_GVP_IMPACT_SERIES_II_RAM_1			ZORRO_ID(GREAT_VALLEY_PRODUCTS_2, 0x0A, 0)
-#define  ZORRO_PROD_GVP_EPC_BASE				ZORRO_ID(GREAT_VALLEY_PRODUCTS_2, 0x0B, 0)
-#define  ZORRO_PROD_GVP_GFORCE_040_1				ZORRO_ID(GREAT_VALLEY_PRODUCTS_2, 0x0B, 0x20)
-#define  ZORRO_PROD_GVP_GFORCE_040_SCSI_1			ZORRO_ID(GREAT_VALLEY_PRODUCTS_2, 0x0B, 0x30)
-#define  ZORRO_PROD_GVP_A1291					ZORRO_ID(GREAT_VALLEY_PRODUCTS_2, 0x0B, 0x40)
-#define  ZORRO_PROD_GVP_COMBO_030_R4				ZORRO_ID(GREAT_VALLEY_PRODUCTS_2, 0x0B, 0x60)
-#define  ZORRO_PROD_GVP_COMBO_030_R4_SCSI			ZORRO_ID(GREAT_VALLEY_PRODUCTS_2, 0x0B, 0x70)
-#define  ZORRO_PROD_GVP_PHONEPAK				ZORRO_ID(GREAT_VALLEY_PRODUCTS_2, 0x0B, 0x78)
-#define  ZORRO_PROD_GVP_IO_EXTENDER				ZORRO_ID(GREAT_VALLEY_PRODUCTS_2, 0x0B, 0x98)
-#define  ZORRO_PROD_GVP_GFORCE_030				ZORRO_ID(GREAT_VALLEY_PRODUCTS_2, 0x0B, 0xa0)
-#define  ZORRO_PROD_GVP_GFORCE_030_SCSI				ZORRO_ID(GREAT_VALLEY_PRODUCTS_2, 0x0B, 0xb0)
-#define  ZORRO_PROD_GVP_A530					ZORRO_ID(GREAT_VALLEY_PRODUCTS_2, 0x0B, 0xc0)
-#define  ZORRO_PROD_GVP_A530_SCSI				ZORRO_ID(GREAT_VALLEY_PRODUCTS_2, 0x0B, 0xd0)
-#define  ZORRO_PROD_GVP_COMBO_030_R3				ZORRO_ID(GREAT_VALLEY_PRODUCTS_2, 0x0B, 0xe0)
-#define  ZORRO_PROD_GVP_COMBO_030_R3_SCSI			ZORRO_ID(GREAT_VALLEY_PRODUCTS_2, 0x0B, 0xf0)
-#define  ZORRO_PROD_GVP_SERIES_II				ZORRO_ID(GREAT_VALLEY_PRODUCTS_2, 0x0B, 0xf8)
-#define  ZORRO_PROD_GVP_IMPACT_3001_IDE_2			ZORRO_ID(GREAT_VALLEY_PRODUCTS_2, 0x0D, 0)
-/*#define  ZORRO_PROD_GVP_A2000_030				ZORRO_ID(GREAT_VALLEY_PRODUCTS_2, 0x0D, 0)*/
-/*#define  ZORRO_PROD_GVP_GFORCE_040_SCSI_2			ZORRO_ID(GREAT_VALLEY_PRODUCTS_2, 0x0D, 0)*/
-#define  ZORRO_PROD_GVP_GFORCE_040_060				ZORRO_ID(GREAT_VALLEY_PRODUCTS_2, 0x16, 0)
-#define  ZORRO_PROD_GVP_IMPACT_VISION_24			ZORRO_ID(GREAT_VALLEY_PRODUCTS_2, 0x20, 0)
-#define  ZORRO_PROD_GVP_GFORCE_040_2				ZORRO_ID(GREAT_VALLEY_PRODUCTS_2, 0xFF, 0)
-
-#define ZORRO_MANUF_CALIFORNIA_ACCESS_SYNERGY			0x07E5
-#define  ZORRO_PROD_CALIFORNIA_ACCESS_SYNERGY_MALIBU		ZORRO_ID(CALIFORNIA_ACCESS_SYNERGY, 0x01, 0)
-
-#define ZORRO_MANUF_XETEC					0x07E6
-#define  ZORRO_PROD_XETEC_FASTCARD				ZORRO_ID(XETEC, 0x01, 0)
-#define  ZORRO_PROD_XETEC_FASTCARD_RAM				ZORRO_ID(XETEC, 0x02, 0)
-#define  ZORRO_PROD_XETEC_FASTCARD_PLUS				ZORRO_ID(XETEC, 0x03, 0)
-
-#define ZORRO_MANUF_PROGRESSIVE_PERIPHERALS_AND_SYSTEMS		0x07EA
-#define  ZORRO_PROD_PPS_MERCURY					ZORRO_ID(PROGRESSIVE_PERIPHERALS_AND_SYSTEMS, 0x00, 0)
-#define  ZORRO_PROD_PPS_A3000_68040				ZORRO_ID(PROGRESSIVE_PERIPHERALS_AND_SYSTEMS, 0x01, 0)
-#define  ZORRO_PROD_PPS_A2000_68040				ZORRO_ID(PROGRESSIVE_PERIPHERALS_AND_SYSTEMS, 0x69, 0)
-#define  ZORRO_PROD_PPS_ZEUS					ZORRO_ID(PROGRESSIVE_PERIPHERALS_AND_SYSTEMS, 0x96, 0)
-#define  ZORRO_PROD_PPS_A500_68040				ZORRO_ID(PROGRESSIVE_PERIPHERALS_AND_SYSTEMS, 0xBB, 0)
-
-#define ZORRO_MANUF_XEBEC					0x07EC
-
-#define ZORRO_MANUF_SPIRIT_TECHNOLOGY				0x07F2
-#define  ZORRO_PROD_SPIRIT_TECHNOLOGY_INSIDER_IN1000		ZORRO_ID(SPIRIT_TECHNOLOGY, 0x01, 0)
-#define  ZORRO_PROD_SPIRIT_TECHNOLOGY_INSIDER_IN500		ZORRO_ID(SPIRIT_TECHNOLOGY, 0x02, 0)
-#define  ZORRO_PROD_SPIRIT_TECHNOLOGY_SIN500			ZORRO_ID(SPIRIT_TECHNOLOGY, 0x03, 0)
-#define  ZORRO_PROD_SPIRIT_TECHNOLOGY_HDA_506			ZORRO_ID(SPIRIT_TECHNOLOGY, 0x04, 0)
-#define  ZORRO_PROD_SPIRIT_TECHNOLOGY_AX_S			ZORRO_ID(SPIRIT_TECHNOLOGY, 0x05, 0)
-#define  ZORRO_PROD_SPIRIT_TECHNOLOGY_OCTABYTE			ZORRO_ID(SPIRIT_TECHNOLOGY, 0x06, 0)
-#define  ZORRO_PROD_SPIRIT_TECHNOLOGY_INMATE			ZORRO_ID(SPIRIT_TECHNOLOGY, 0x08, 0)
-
-#define ZORRO_MANUF_SPIRIT_TECHNOLOGY_2				0x07F3
-
-#define ZORRO_MANUF_BSC_ALFADATA_1				0x07FE
-#define  ZORRO_PROD_BSC_ALF_3_1					ZORRO_ID(BSC_ALFADATA_1, 0x03, 0)
-
-#define ZORRO_MANUF_BSC_ALFADATA_2				0x0801
-#define  ZORRO_PROD_BSC_ALF_2_1					ZORRO_ID(BSC_ALFADATA_2, 0x01, 0)
-#define  ZORRO_PROD_BSC_ALF_2_2					ZORRO_ID(BSC_ALFADATA_2, 0x02, 0)
-#define  ZORRO_PROD_BSC_ALF_3_2					ZORRO_ID(BSC_ALFADATA_2, 0x03, 0)
-
-#define ZORRO_MANUF_CARDCO_2					0x0802
-#define  ZORRO_PROD_CARDCO_KRONOS_2000_2			ZORRO_ID(CARDCO_2, 0x04, 0)
-#define  ZORRO_PROD_CARDCO_A1000_2				ZORRO_ID(CARDCO_2, 0x0C, 0)
-
-#define ZORRO_MANUF_JOCHHEIM					0x0804
-#define  ZORRO_PROD_JOCHHEIM_RAM				ZORRO_ID(JOCHHEIM, 0x01, 0)
-
-#define ZORRO_MANUF_CHECKPOINT_TECHNOLOGIES			0x0807
-#define  ZORRO_PROD_CHECKPOINT_TECHNOLOGIES_SERIAL_SOLUTION	ZORRO_ID(CHECKPOINT_TECHNOLOGIES, 0x00, 0)
-
-#define ZORRO_MANUF_EDOTRONIK					0x0810
-#define  ZORRO_PROD_EDOTRONIK_IEEE_488				ZORRO_ID(EDOTRONIK, 0x01, 0)
-#define  ZORRO_PROD_EDOTRONIK_8032				ZORRO_ID(EDOTRONIK, 0x02, 0)
-#define  ZORRO_PROD_EDOTRONIK_MULTISERIAL			ZORRO_ID(EDOTRONIK, 0x03, 0)
-#define  ZORRO_PROD_EDOTRONIK_VIDEODIGITIZER			ZORRO_ID(EDOTRONIK, 0x04, 0)
-#define  ZORRO_PROD_EDOTRONIK_PARALLEL_IO			ZORRO_ID(EDOTRONIK, 0x05, 0)
-#define  ZORRO_PROD_EDOTRONIK_PIC_PROTOYPING			ZORRO_ID(EDOTRONIK, 0x06, 0)
-#define  ZORRO_PROD_EDOTRONIK_ADC				ZORRO_ID(EDOTRONIK, 0x07, 0)
-#define  ZORRO_PROD_EDOTRONIK_VME				ZORRO_ID(EDOTRONIK, 0x08, 0)
-#define  ZORRO_PROD_EDOTRONIK_DSP96000				ZORRO_ID(EDOTRONIK, 0x09, 0)
-
-#define ZORRO_MANUF_NES_INC					0x0813
-#define  ZORRO_PROD_NES_INC_RAM					ZORRO_ID(NES_INC, 0x00, 0)
-
-#define ZORRO_MANUF_ICD						0x0817
-#define  ZORRO_PROD_ICD_ADVANTAGE_2000_SCSI			ZORRO_ID(ICD, 0x01, 0)
-#define  ZORRO_PROD_ICD_ADVANTAGE_IDE				ZORRO_ID(ICD, 0x03, 0)
-#define  ZORRO_PROD_ICD_ADVANTAGE_2080_RAM			ZORRO_ID(ICD, 0x04, 0)
-
-#define ZORRO_MANUF_KUPKE_2					0x0819
-#define  ZORRO_PROD_KUPKE_OMTI					ZORRO_ID(KUPKE_2, 0x01, 0)
-#define  ZORRO_PROD_KUPKE_SCSI_II				ZORRO_ID(KUPKE_2, 0x02, 0)
-#define  ZORRO_PROD_KUPKE_GOLEM_BOX				ZORRO_ID(KUPKE_2, 0x03, 0)
-#define  ZORRO_PROD_KUPKE_030_882				ZORRO_ID(KUPKE_2, 0x04, 0)
-#define  ZORRO_PROD_KUPKE_SCSI_AT				ZORRO_ID(KUPKE_2, 0x05, 0)
-
-#define ZORRO_MANUF_GREAT_VALLEY_PRODUCTS_3			0x081D
-#define  ZORRO_PROD_GVP_A2000_RAM8				ZORRO_ID(GREAT_VALLEY_PRODUCTS_3, 0x09, 0)
-#define  ZORRO_PROD_GVP_IMPACT_SERIES_II_RAM_2			ZORRO_ID(GREAT_VALLEY_PRODUCTS_3, 0x0A, 0)
-
-#define ZORRO_MANUF_INTERWORKS_NETWORK				0x081E
-
-#define ZORRO_MANUF_HARDITAL_SYNTHESIS				0x0820
-#define  ZORRO_PROD_HARDITAL_SYNTHESIS_TQM_68030_68882		ZORRO_ID(HARDITAL_SYNTHESIS, 0x14, 0)
-
-#define ZORRO_MANUF_APPLIED_ENGINEERING				0x0828
-#define  ZORRO_PROD_APPLIED_ENGINEERING_DL2000			ZORRO_ID(APPLIED_ENGINEERING, 0x10, 0)
-#define  ZORRO_PROD_APPLIED_ENGINEERING_RAM_WORKS		ZORRO_ID(APPLIED_ENGINEERING, 0xE0, 0)
-
-#define ZORRO_MANUF_BSC_ALFADATA_3				0x082C
-#define  ZORRO_PROD_BSC_OKTAGON_2008				ZORRO_ID(BSC_ALFADATA_3, 0x05, 0)
-#define  ZORRO_PROD_BSC_TANDEM_AT_2008_508			ZORRO_ID(BSC_ALFADATA_3, 0x06, 0)
-#define  ZORRO_PROD_BSC_ALFA_RAM_1200				ZORRO_ID(BSC_ALFADATA_3, 0x07, 0)
-#define  ZORRO_PROD_BSC_OKTAGON_2008_RAM			ZORRO_ID(BSC_ALFADATA_3, 0x08, 0)
-#define  ZORRO_PROD_BSC_MULTIFACE_I				ZORRO_ID(BSC_ALFADATA_3, 0x10, 0)
-#define  ZORRO_PROD_BSC_MULTIFACE_II				ZORRO_ID(BSC_ALFADATA_3, 0x11, 0)
-#define  ZORRO_PROD_BSC_MULTIFACE_III				ZORRO_ID(BSC_ALFADATA_3, 0x12, 0)
-#define  ZORRO_PROD_BSC_FRAMEMASTER_II				ZORRO_ID(BSC_ALFADATA_3, 0x20, 0)
-#define  ZORRO_PROD_BSC_GRAFFITI_RAM				ZORRO_ID(BSC_ALFADATA_3, 0x21, 0)
-#define  ZORRO_PROD_BSC_GRAFFITI_REG				ZORRO_ID(BSC_ALFADATA_3, 0x22, 0)
-#define  ZORRO_PROD_BSC_ISDN_MASTERCARD				ZORRO_ID(BSC_ALFADATA_3, 0x40, 0)
-#define  ZORRO_PROD_BSC_ISDN_MASTERCARD_II			ZORRO_ID(BSC_ALFADATA_3, 0x41, 0)
-
-#define ZORRO_MANUF_PHOENIX					0x0835
-#define  ZORRO_PROD_PHOENIX_ST506				ZORRO_ID(PHOENIX, 0x21, 0)
-#define  ZORRO_PROD_PHOENIX_SCSI				ZORRO_ID(PHOENIX, 0x22, 0)
-#define  ZORRO_PROD_PHOENIX_RAM					ZORRO_ID(PHOENIX, 0xBE, 0)
-
-#define ZORRO_MANUF_ADVANCED_STORAGE_SYSTEMS			0x0836
-#define  ZORRO_PROD_ADVANCED_STORAGE_SYSTEMS_NEXUS		ZORRO_ID(ADVANCED_STORAGE_SYSTEMS, 0x01, 0)
-#define  ZORRO_PROD_ADVANCED_STORAGE_SYSTEMS_NEXUS_RAM		ZORRO_ID(ADVANCED_STORAGE_SYSTEMS, 0x08, 0)
-
-#define ZORRO_MANUF_IMPULSE					0x0838
-#define  ZORRO_PROD_IMPULSE_FIRECRACKER_24			ZORRO_ID(IMPULSE, 0x00, 0)
-
-#define ZORRO_MANUF_IVS						0x0840
-#define  ZORRO_PROD_IVS_GRANDSLAM_PIC_2				ZORRO_ID(IVS, 0x02, 0)
-#define  ZORRO_PROD_IVS_GRANDSLAM_PIC_1				ZORRO_ID(IVS, 0x04, 0)
-#define  ZORRO_PROD_IVS_OVERDRIVE				ZORRO_ID(IVS, 0x10, 0)
-#define  ZORRO_PROD_IVS_TRUMPCARD_CLASSIC			ZORRO_ID(IVS, 0x30, 0)
-#define  ZORRO_PROD_IVS_TRUMPCARD_PRO_GRANDSLAM			ZORRO_ID(IVS, 0x34, 0)
-#define  ZORRO_PROD_IVS_META_4					ZORRO_ID(IVS, 0x40, 0)
-#define  ZORRO_PROD_IVS_WAVETOOLS				ZORRO_ID(IVS, 0xBF, 0)
-#define  ZORRO_PROD_IVS_VECTOR_1				ZORRO_ID(IVS, 0xF3, 0)
-#define  ZORRO_PROD_IVS_VECTOR_2				ZORRO_ID(IVS, 0xF4, 0)
-
-#define ZORRO_MANUF_VECTOR_1					0x0841
-#define  ZORRO_PROD_VECTOR_CONNECTION_1				ZORRO_ID(VECTOR_1, 0xE3, 0)
-
-#define ZORRO_MANUF_XPERT_PRODEV				0x0845
-#define  ZORRO_PROD_XPERT_PRODEV_VISIONA_RAM			ZORRO_ID(XPERT_PRODEV, 0x01, 0)
-#define  ZORRO_PROD_XPERT_PRODEV_VISIONA_REG			ZORRO_ID(XPERT_PRODEV, 0x02, 0)
-#define  ZORRO_PROD_XPERT_PRODEV_MERLIN_RAM			ZORRO_ID(XPERT_PRODEV, 0x03, 0)
-#define  ZORRO_PROD_XPERT_PRODEV_MERLIN_REG_1			ZORRO_ID(XPERT_PRODEV, 0x04, 0)
-#define  ZORRO_PROD_XPERT_PRODEV_MERLIN_REG_2			ZORRO_ID(XPERT_PRODEV, 0xC9, 0)
-
-#define ZORRO_MANUF_HYDRA_SYSTEMS				0x0849
-#define  ZORRO_PROD_HYDRA_SYSTEMS_AMIGANET			ZORRO_ID(HYDRA_SYSTEMS, 0x01, 0)
-
-#define ZORRO_MANUF_SUNRIZE_INDUSTRIES				0x084F
-#define  ZORRO_PROD_SUNRIZE_INDUSTRIES_AD1012			ZORRO_ID(SUNRIZE_INDUSTRIES, 0x01, 0)
-#define  ZORRO_PROD_SUNRIZE_INDUSTRIES_AD516			ZORRO_ID(SUNRIZE_INDUSTRIES, 0x02, 0)
-#define  ZORRO_PROD_SUNRIZE_INDUSTRIES_DD512			ZORRO_ID(SUNRIZE_INDUSTRIES, 0x03, 0)
-
-#define ZORRO_MANUF_TRICERATOPS					0x0850
-#define  ZORRO_PROD_TRICERATOPS_MULTI_IO			ZORRO_ID(TRICERATOPS, 0x01, 0)
-
-#define ZORRO_MANUF_APPLIED_MAGIC				0x0851
-#define  ZORRO_PROD_APPLIED_MAGIC_DMI_RESOLVER			ZORRO_ID(APPLIED_MAGIC, 0x01, 0)
-#define  ZORRO_PROD_APPLIED_MAGIC_DIGITAL_BROADCASTER		ZORRO_ID(APPLIED_MAGIC, 0x06, 0)
-
-#define ZORRO_MANUF_GFX_BASE					0x085E
-#define  ZORRO_PROD_GFX_BASE_GDA_1_VRAM				ZORRO_ID(GFX_BASE, 0x00, 0)
-#define  ZORRO_PROD_GFX_BASE_GDA_1				ZORRO_ID(GFX_BASE, 0x01, 0)
-
-#define ZORRO_MANUF_ROCTEC					0x0860
-#define  ZORRO_PROD_ROCTEC_RH_800C				ZORRO_ID(ROCTEC, 0x01, 0)
-#define  ZORRO_PROD_ROCTEC_RH_800C_RAM				ZORRO_ID(ROCTEC, 0x01, 0)
-
-#define ZORRO_MANUF_KATO					0x0861
-#define  ZORRO_PROD_KATO_MELODY					ZORRO_ID(KATO, 0x80, 0)
-/* ID clash!! */
-#define ZORRO_MANUF_HELFRICH_1					0x0861
-#define  ZORRO_PROD_HELFRICH_RAINBOW_II				ZORRO_ID(HELFRICH_1, 0x20, 0)
-#define  ZORRO_PROD_HELFRICH_RAINBOW_III			ZORRO_ID(HELFRICH_1, 0x21, 0)
-
-#define ZORRO_MANUF_ATLANTIS					0x0862
-
-#define ZORRO_MANUF_PROTAR					0x0864
-
-#define ZORRO_MANUF_ACS						0x0865
-
-#define ZORRO_MANUF_SOFTWARE_RESULTS_ENTERPRISES		0x0866
-#define  ZORRO_PROD_SOFTWARE_RESULTS_ENTERPRISES_GOLDEN_GATE_2_BUS_PLUS	ZORRO_ID(SOFTWARE_RESULTS_ENTERPRISES, 0x01, 0)
-
-#define ZORRO_MANUF_MASOBOSHI					0x086D
-#define  ZORRO_PROD_MASOBOSHI_MASTER_CARD_SC201			ZORRO_ID(MASOBOSHI, 0x03, 0)
-#define  ZORRO_PROD_MASOBOSHI_MASTER_CARD_MC702			ZORRO_ID(MASOBOSHI, 0x04, 0)
-#define  ZORRO_PROD_MASOBOSHI_MVD_819				ZORRO_ID(MASOBOSHI, 0x07, 0)
-
-#define ZORRO_MANUF_MAINHATTAN_DATA				0x086F
-#define  ZORRO_PROD_MAINHATTAN_DATA_IDE				ZORRO_ID(MAINHATTAN_DATA, 0x01, 0)
-
-#define ZORRO_MANUF_VILLAGE_TRONIC				0x0877
-#define  ZORRO_PROD_VILLAGE_TRONIC_DOMINO_RAM			ZORRO_ID(VILLAGE_TRONIC, 0x01, 0)
-#define  ZORRO_PROD_VILLAGE_TRONIC_DOMINO_REG			ZORRO_ID(VILLAGE_TRONIC, 0x02, 0)
-#define  ZORRO_PROD_VILLAGE_TRONIC_DOMINO_16M_PROTOTYPE		ZORRO_ID(VILLAGE_TRONIC, 0x03, 0)
-#define  ZORRO_PROD_VILLAGE_TRONIC_PICASSO_II_II_PLUS_RAM	ZORRO_ID(VILLAGE_TRONIC, 0x0B, 0)
-#define  ZORRO_PROD_VILLAGE_TRONIC_PICASSO_II_II_PLUS_REG	ZORRO_ID(VILLAGE_TRONIC, 0x0C, 0)
-#define  ZORRO_PROD_VILLAGE_TRONIC_PICASSO_II_II_PLUS_SEGMENTED_MODE	ZORRO_ID(VILLAGE_TRONIC, 0x0D, 0)
-#define  ZORRO_PROD_VILLAGE_TRONIC_PICASSO_IV_Z2_RAM1		ZORRO_ID(VILLAGE_TRONIC, 0x15, 0)
-#define  ZORRO_PROD_VILLAGE_TRONIC_PICASSO_IV_Z2_RAM2		ZORRO_ID(VILLAGE_TRONIC, 0x16, 0)
-#define  ZORRO_PROD_VILLAGE_TRONIC_PICASSO_IV_Z2_REG		ZORRO_ID(VILLAGE_TRONIC, 0x17, 0)
-#define  ZORRO_PROD_VILLAGE_TRONIC_PICASSO_IV_Z3		ZORRO_ID(VILLAGE_TRONIC, 0x18, 0)
-#define  ZORRO_PROD_VILLAGE_TRONIC_ARIADNE			ZORRO_ID(VILLAGE_TRONIC, 0xC9, 0)
-#define  ZORRO_PROD_VILLAGE_TRONIC_ARIADNE2			ZORRO_ID(VILLAGE_TRONIC, 0xCA, 0)
-
-#define ZORRO_MANUF_UTILITIES_UNLIMITED				0x087B
-#define  ZORRO_PROD_UTILITIES_UNLIMITED_EMPLANT_DELUXE		ZORRO_ID(UTILITIES_UNLIMITED, 0x15, 0)
-#define  ZORRO_PROD_UTILITIES_UNLIMITED_EMPLANT_DELUXE2		ZORRO_ID(UTILITIES_UNLIMITED, 0x20, 0)
-
-#define ZORRO_MANUF_AMITRIX					0x0880
-#define  ZORRO_PROD_AMITRIX_MULTI_IO				ZORRO_ID(AMITRIX, 0x01, 0)
-#define  ZORRO_PROD_AMITRIX_CD_RAM				ZORRO_ID(AMITRIX, 0x02, 0)
-
-#define ZORRO_MANUF_ARMAX					0x0885
-#define  ZORRO_PROD_ARMAX_OMNIBUS				ZORRO_ID(ARMAX, 0x00, 0)
-
-#define ZORRO_MANUF_ZEUS					0x088D
-#define  ZORRO_PROD_ZEUS_SPIDER					ZORRO_ID(ZEUS, 0x04, 0)
-
-#define ZORRO_MANUF_NEWTEK					0x088F
-#define  ZORRO_PROD_NEWTEK_VIDEOTOASTER				ZORRO_ID(NEWTEK, 0x00, 0)
-
-#define ZORRO_MANUF_M_TECH_GERMANY				0x0890
-#define  ZORRO_PROD_MTEC_AT500_2				ZORRO_ID(M_TECH_GERMANY, 0x01, 0)
-#define  ZORRO_PROD_MTEC_68030					ZORRO_ID(M_TECH_GERMANY, 0x03, 0)
-#define  ZORRO_PROD_MTEC_68020I					ZORRO_ID(M_TECH_GERMANY, 0x06, 0)
-#define  ZORRO_PROD_MTEC_A1200_T68030_RTC			ZORRO_ID(M_TECH_GERMANY, 0x20, 0)
-#define  ZORRO_PROD_MTEC_VIPER_MK_V_E_MATRIX_530		ZORRO_ID(M_TECH_GERMANY, 0x21, 0)
-#define  ZORRO_PROD_MTEC_8_MB_RAM				ZORRO_ID(M_TECH_GERMANY, 0x22, 0)
-#define  ZORRO_PROD_MTEC_VIPER_MK_V_E_MATRIX_530_SCSI_IDE	ZORRO_ID(M_TECH_GERMANY, 0x24, 0)
-
-#define ZORRO_MANUF_GREAT_VALLEY_PRODUCTS_4			0x0891
-#define  ZORRO_PROD_GVP_EGS_28_24_SPECTRUM_RAM			ZORRO_ID(GREAT_VALLEY_PRODUCTS_4, 0x01, 0)
-#define  ZORRO_PROD_GVP_EGS_28_24_SPECTRUM_REG			ZORRO_ID(GREAT_VALLEY_PRODUCTS_4, 0x02, 0)
-
-#define ZORRO_MANUF_APOLLO_1					0x0892
-#define  ZORRO_PROD_APOLLO_A1200				ZORRO_ID(APOLLO_1, 0x01, 0)
-
-#define ZORRO_MANUF_HELFRICH_2					0x0893
-#define  ZORRO_PROD_HELFRICH_PICCOLO_RAM			ZORRO_ID(HELFRICH_2, 0x05, 0)
-#define  ZORRO_PROD_HELFRICH_PICCOLO_REG			ZORRO_ID(HELFRICH_2, 0x06, 0)
-#define  ZORRO_PROD_HELFRICH_PEGGY_PLUS_MPEG			ZORRO_ID(HELFRICH_2, 0x07, 0)
-#define  ZORRO_PROD_HELFRICH_VIDEOCRUNCHER			ZORRO_ID(HELFRICH_2, 0x08, 0)
-#define  ZORRO_PROD_HELFRICH_SD64_RAM				ZORRO_ID(HELFRICH_2, 0x0A, 0)
-#define  ZORRO_PROD_HELFRICH_SD64_REG				ZORRO_ID(HELFRICH_2, 0x0B, 0)
-
-#define ZORRO_MANUF_MACROSYSTEMS_USA				0x089B
-#define  ZORRO_PROD_MACROSYSTEMS_WARP_ENGINE_40xx		ZORRO_ID(MACROSYSTEMS_USA, 0x13, 0)
-
-#define ZORRO_MANUF_ELBOX_COMPUTER				0x089E
-#define  ZORRO_PROD_ELBOX_COMPUTER_1200_4			ZORRO_ID(ELBOX_COMPUTER, 0x06, 0)
-
-#define ZORRO_MANUF_HARMS_PROFESSIONAL				0x0A00
-#define  ZORRO_PROD_HARMS_PROFESSIONAL_030_PLUS			ZORRO_ID(HARMS_PROFESSIONAL, 0x10, 0)
-#define  ZORRO_PROD_HARMS_PROFESSIONAL_3500			ZORRO_ID(HARMS_PROFESSIONAL, 0xD0, 0)
-
-#define ZORRO_MANUF_MICRONIK					0x0A50
-#define  ZORRO_PROD_MICRONIK_RCA_120				ZORRO_ID(MICRONIK, 0x0A, 0)
-
-#define ZORRO_MANUF_MICRONIK2					0x0F0F
-#define  ZORRO_PROD_MICRONIK2_Z3I				ZORRO_ID(MICRONIK2, 0x01, 0)
-
-#define ZORRO_MANUF_MEGAMICRO					0x1000
-#define  ZORRO_PROD_MEGAMICRO_SCRAM_500				ZORRO_ID(MEGAMICRO, 0x03, 0)
-#define  ZORRO_PROD_MEGAMICRO_SCRAM_500_RAM			ZORRO_ID(MEGAMICRO, 0x04, 0)
-
-#define ZORRO_MANUF_IMTRONICS_2					0x1028
-#define  ZORRO_PROD_IMTRONICS_HURRICANE_2800_3			ZORRO_ID(IMTRONICS_2, 0x39, 0)
-#define  ZORRO_PROD_IMTRONICS_HURRICANE_2800_4			ZORRO_ID(IMTRONICS_2, 0x57, 0)
-
-/* unofficial ID */
-#define ZORRO_MANUF_INDIVIDUAL_COMPUTERS			0x1212
-#define  ZORRO_PROD_INDIVIDUAL_COMPUTERS_BUDDHA			ZORRO_ID(INDIVIDUAL_COMPUTERS, 0x00, 0)
-#define  ZORRO_PROD_INDIVIDUAL_COMPUTERS_X_SURF			ZORRO_ID(INDIVIDUAL_COMPUTERS, 0x17, 0)
-#define  ZORRO_PROD_INDIVIDUAL_COMPUTERS_CATWEASEL		ZORRO_ID(INDIVIDUAL_COMPUTERS, 0x2A, 0)
-
-#define ZORRO_MANUF_KUPKE_3					0x1248
-#define  ZORRO_PROD_KUPKE_GOLEM_HD_3000				ZORRO_ID(KUPKE_3, 0x01, 0)
-
-#define ZORRO_MANUF_ITH						0x1388
-#define  ZORRO_PROD_ITH_ISDN_MASTER_II				ZORRO_ID(ITH, 0x01, 0)
-
-#define ZORRO_MANUF_VMC						0x1389
-#define  ZORRO_PROD_VMC_ISDN_BLASTER_Z2				ZORRO_ID(VMC, 0x01, 0)
-#define  ZORRO_PROD_VMC_HYPERCOM_4				ZORRO_ID(VMC, 0x02, 0)
-
-#define ZORRO_MANUF_INFORMATION					0x157C
-#define  ZORRO_PROD_INFORMATION_ISDN_ENGINE_I			ZORRO_ID(INFORMATION, 0x64, 0)
-
-#define ZORRO_MANUF_VORTEX					0x2017
-#define  ZORRO_PROD_VORTEX_GOLDEN_GATE_80386SX			ZORRO_ID(VORTEX, 0x07, 0)
-#define  ZORRO_PROD_VORTEX_GOLDEN_GATE_RAM			ZORRO_ID(VORTEX, 0x08, 0)
-#define  ZORRO_PROD_VORTEX_GOLDEN_GATE_80486			ZORRO_ID(VORTEX, 0x09, 0)
-
-#define ZORRO_MANUF_EXPANSION_SYSTEMS				0x2062
-#define  ZORRO_PROD_EXPANSION_SYSTEMS_DATAFLYER_4000SX		ZORRO_ID(EXPANSION_SYSTEMS, 0x01, 0)
-#define  ZORRO_PROD_EXPANSION_SYSTEMS_DATAFLYER_4000SX_RAM	ZORRO_ID(EXPANSION_SYSTEMS, 0x02, 0)
-
-#define ZORRO_MANUF_READYSOFT					0x2100
-#define  ZORRO_PROD_READYSOFT_AMAX_II_IV			ZORRO_ID(READYSOFT, 0x01, 0)
-
-#define ZORRO_MANUF_PHASE5					0x2140
-#define  ZORRO_PROD_PHASE5_BLIZZARD_RAM				ZORRO_ID(PHASE5, 0x01, 0)
-#define  ZORRO_PROD_PHASE5_BLIZZARD				ZORRO_ID(PHASE5, 0x02, 0)
-#define  ZORRO_PROD_PHASE5_BLIZZARD_1220_IV			ZORRO_ID(PHASE5, 0x06, 0)
-#define  ZORRO_PROD_PHASE5_FASTLANE_Z3_RAM			ZORRO_ID(PHASE5, 0x0A, 0)
-#define  ZORRO_PROD_PHASE5_BLIZZARD_1230_II_FASTLANE_Z3_CYBERSCSI_CYBERSTORM060	ZORRO_ID(PHASE5, 0x0B, 0)
-#define  ZORRO_PROD_PHASE5_BLIZZARD_1220_CYBERSTORM		ZORRO_ID(PHASE5, 0x0C, 0)
-#define  ZORRO_PROD_PHASE5_BLIZZARD_1230			ZORRO_ID(PHASE5, 0x0D, 0)
-#define  ZORRO_PROD_PHASE5_BLIZZARD_1230_IV_1260		ZORRO_ID(PHASE5, 0x11, 0)
-#define  ZORRO_PROD_PHASE5_BLIZZARD_2060			ZORRO_ID(PHASE5, 0x18, 0)
-#define  ZORRO_PROD_PHASE5_CYBERSTORM_MK_II			ZORRO_ID(PHASE5, 0x19, 0)
-#define  ZORRO_PROD_PHASE5_CYBERVISION64			ZORRO_ID(PHASE5, 0x22, 0)
-#define  ZORRO_PROD_PHASE5_CYBERVISION64_3D_PROTOTYPE		ZORRO_ID(PHASE5, 0x32, 0)
-#define  ZORRO_PROD_PHASE5_CYBERVISION64_3D			ZORRO_ID(PHASE5, 0x43, 0)
-#define  ZORRO_PROD_PHASE5_CYBERSTORM_MK_III			ZORRO_ID(PHASE5, 0x64, 0)
-#define  ZORRO_PROD_PHASE5_BLIZZARD_603E_PLUS			ZORRO_ID(PHASE5, 0x6e, 0)
-
-#define ZORRO_MANUF_DPS						0x2169
-#define  ZORRO_PROD_DPS_PERSONAL_ANIMATION_RECORDER		ZORRO_ID(DPS, 0x01, 0)
-
-#define ZORRO_MANUF_APOLLO_2					0x2200
-#define  ZORRO_PROD_APOLLO_A620_68020_1				ZORRO_ID(APOLLO_2, 0x00, 0)
-#define  ZORRO_PROD_APOLLO_A620_68020_2				ZORRO_ID(APOLLO_2, 0x01, 0)
-
-#define ZORRO_MANUF_APOLLO_3					0x2222
-#define  ZORRO_PROD_APOLLO_AT_APOLLO				ZORRO_ID(APOLLO_3, 0x22, 0)
-#define  ZORRO_PROD_APOLLO_1230_1240_1260_2030_4040_4060	ZORRO_ID(APOLLO_3, 0x23, 0)
-
-#define ZORRO_MANUF_PETSOFF_LP					0x38A5
-#define  ZORRO_PROD_PETSOFF_LP_DELFINA				ZORRO_ID(PETSOFF_LP, 0x00, 0)
-#define  ZORRO_PROD_PETSOFF_LP_DELFINA_LITE			ZORRO_ID(PETSOFF_LP, 0x01, 0)
-
-#define ZORRO_MANUF_UWE_GERLACH					0x3FF7
-#define  ZORRO_PROD_UWE_GERLACH_RAM_ROM				ZORRO_ID(UWE_GERLACH, 0xd4, 0)
-
-#define ZORRO_MANUF_ACT						0x4231
-#define  ZORRO_PROD_ACT_PRELUDE					ZORRO_ID(ACT, 0x01, 0)
-
-#define ZORRO_MANUF_MACROSYSTEMS_GERMANY			0x4754
-#define  ZORRO_PROD_MACROSYSTEMS_MAESTRO			ZORRO_ID(MACROSYSTEMS_GERMANY, 0x03, 0)
-#define  ZORRO_PROD_MACROSYSTEMS_VLAB				ZORRO_ID(MACROSYSTEMS_GERMANY, 0x04, 0)
-#define  ZORRO_PROD_MACROSYSTEMS_MAESTRO_PRO			ZORRO_ID(MACROSYSTEMS_GERMANY, 0x05, 0)
-#define  ZORRO_PROD_MACROSYSTEMS_RETINA				ZORRO_ID(MACROSYSTEMS_GERMANY, 0x06, 0)
-#define  ZORRO_PROD_MACROSYSTEMS_MULTI_EVOLUTION		ZORRO_ID(MACROSYSTEMS_GERMANY, 0x08, 0)
-#define  ZORRO_PROD_MACROSYSTEMS_TOCCATA			ZORRO_ID(MACROSYSTEMS_GERMANY, 0x0C, 0)
-#define  ZORRO_PROD_MACROSYSTEMS_RETINA_Z3			ZORRO_ID(MACROSYSTEMS_GERMANY, 0x10, 0)
-#define  ZORRO_PROD_MACROSYSTEMS_VLAB_MOTION			ZORRO_ID(MACROSYSTEMS_GERMANY, 0x12, 0)
-#define  ZORRO_PROD_MACROSYSTEMS_ALTAIS				ZORRO_ID(MACROSYSTEMS_GERMANY, 0x13, 0)
-#define  ZORRO_PROD_MACROSYSTEMS_FALCON_040			ZORRO_ID(MACROSYSTEMS_GERMANY, 0xFD, 0)
-
-#define ZORRO_MANUF_COMBITEC					0x6766
-
-#define ZORRO_MANUF_SKI_PERIPHERALS				0x8000
-#define  ZORRO_PROD_SKI_PERIPHERALS_MAST_FIREBALL		ZORRO_ID(SKI_PERIPHERALS, 0x08, 0)
-#define  ZORRO_PROD_SKI_PERIPHERALS_SCSI_DUAL_SERIAL		ZORRO_ID(SKI_PERIPHERALS, 0x80, 0)
-
-#define ZORRO_MANUF_REIS_WARE_2					0xA9AD
-#define  ZORRO_PROD_REIS_WARE_SCAN_KING				ZORRO_ID(REIS_WARE_2, 0x11, 0)
-
-#define ZORRO_MANUF_CAMERON					0xAA01
-#define  ZORRO_PROD_CAMERON_PERSONAL_A4				ZORRO_ID(CAMERON, 0x10, 0)
-
-#define ZORRO_MANUF_REIS_WARE					0xAA11
-#define  ZORRO_PROD_REIS_WARE_HANDYSCANNER			ZORRO_ID(REIS_WARE, 0x11, 0)
-
-#define ZORRO_MANUF_PHOENIX_2					0xB5A8
-#define  ZORRO_PROD_PHOENIX_ST506_2				ZORRO_ID(PHOENIX_2, 0x21, 0)
-#define  ZORRO_PROD_PHOENIX_SCSI_2				ZORRO_ID(PHOENIX_2, 0x22, 0)
-#define  ZORRO_PROD_PHOENIX_RAM_2				ZORRO_ID(PHOENIX_2, 0xBE, 0)
-
-#define ZORRO_MANUF_COMBITEC_2					0xC008
-#define  ZORRO_PROD_COMBITEC_HD					ZORRO_ID(COMBITEC_2, 0x2A, 0)
-#define  ZORRO_PROD_COMBITEC_SRAM				ZORRO_ID(COMBITEC_2, 0x2B, 0)
-
-
-    /*
-     *  Test and illegal Manufacturer IDs.
-     */
-
-#define ZORRO_MANUF_HACKER					0x07DB
-#define  ZORRO_PROD_GENERAL_PROTOTYPE				ZORRO_ID(HACKER, 0x00, 0)
-#define  ZORRO_PROD_HACKER_SCSI					ZORRO_ID(HACKER, 0x01, 0)
-#define  ZORRO_PROD_RESOURCE_MANAGEMENT_FORCE_QUICKNET_QN2000	ZORRO_ID(HACKER, 0x02, 0)
-#define  ZORRO_PROD_VECTOR_CONNECTION_2				ZORRO_ID(HACKER, 0xE0, 0)
-#define  ZORRO_PROD_VECTOR_CONNECTION_3				ZORRO_ID(HACKER, 0xE1, 0)
-#define  ZORRO_PROD_VECTOR_CONNECTION_4				ZORRO_ID(HACKER, 0xE2, 0)
-#define  ZORRO_PROD_VECTOR_CONNECTION_5				ZORRO_ID(HACKER, 0xE3, 0)
diff --git a/ANDROID_3.4.5/include/linux/zutil.h b/ANDROID_3.4.5/include/linux/zutil.h
deleted file mode 100644
index 6adfa9a6..00000000
--- a/ANDROID_3.4.5/include/linux/zutil.h
+++ /dev/null
@@ -1,106 +0,0 @@
-/* zutil.h -- internal interface and configuration of the compression library
- * Copyright (C) 1995-1998 Jean-loup Gailly.
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/* WARNING: this file should *not* be used by applications. It is
-   part of the implementation of the compression library and is
-   subject to change. Applications should only use zlib.h.
- */
-
-/* @(#) $Id: zutil.h,v 1.1 2000/01/01 03:32:23 davem Exp $ */
-
-#ifndef _Z_UTIL_H
-#define _Z_UTIL_H
-
-#include <linux/zlib.h>
-#include <linux/string.h>
-#include <linux/kernel.h>
-
-typedef unsigned char  uch;
-typedef unsigned short ush;
-typedef unsigned long  ulg;
-
-        /* common constants */
-
-#define STORED_BLOCK 0
-#define STATIC_TREES 1
-#define DYN_TREES    2
-/* The three kinds of block type */
-
-#define MIN_MATCH  3
-#define MAX_MATCH  258
-/* The minimum and maximum match lengths */
-
-#define PRESET_DICT 0x20 /* preset dictionary flag in zlib header */
-
-        /* target dependencies */
-
-        /* Common defaults */
-
-#ifndef OS_CODE
-#  define OS_CODE  0x03  /* assume Unix */
-#endif
-
-         /* functions */
-
-typedef uLong (*check_func) (uLong check, const Byte *buf,
-				       uInt len);
-
-
-                        /* checksum functions */
-
-#define BASE 65521L /* largest prime smaller than 65536 */
-#define NMAX 5552
-/* NMAX is the largest n such that 255n(n+1)/2 + (n+1)(BASE-1) <= 2^32-1 */
-
-#define DO1(buf,i)  {s1 += buf[i]; s2 += s1;}
-#define DO2(buf,i)  DO1(buf,i); DO1(buf,i+1);
-#define DO4(buf,i)  DO2(buf,i); DO2(buf,i+2);
-#define DO8(buf,i)  DO4(buf,i); DO4(buf,i+4);
-#define DO16(buf)   DO8(buf,0); DO8(buf,8);
-
-/* ========================================================================= */
-/*
-     Update a running Adler-32 checksum with the bytes buf[0..len-1] and
-   return the updated checksum. If buf is NULL, this function returns
-   the required initial value for the checksum.
-   An Adler-32 checksum is almost as reliable as a CRC32 but can be computed
-   much faster. Usage example:
-
-     uLong adler = adler32(0L, NULL, 0);
-
-     while (read_buffer(buffer, length) != EOF) {
-       adler = adler32(adler, buffer, length);
-     }
-     if (adler != original_adler) error();
-*/
-static inline uLong zlib_adler32(uLong adler,
-				 const Byte *buf,
-				 uInt len)
-{
-    unsigned long s1 = adler & 0xffff;
-    unsigned long s2 = (adler >> 16) & 0xffff;
-    int k;
-
-    if (buf == NULL) return 1L;
-
-    while (len > 0) {
-        k = len < NMAX ? len : NMAX;
-        len -= k;
-        while (k >= 16) {
-            DO16(buf);
-	    buf += 16;
-            k -= 16;
-        }
-        if (k != 0) do {
-            s1 += *buf++;
-	    s2 += s1;
-        } while (--k);
-        s1 %= BASE;
-        s2 %= BASE;
-    }
-    return (s2 << 16) | s1;
-}
-
-#endif /* _Z_UTIL_H */